The international performance of healthcare systems in population health: capabilities of pooled cross-sectional time series methods.

PubMed

Reibling, Nadine

2013-09-01

This paper outlines the capabilities of pooled cross-sectional time series methodology for the international comparison of health system performance in population health. It shows how common model specifications can be improved so that they not only better address the specific nature of time series data on population health but are also more closely aligned with our theoretical expectations of the effect of healthcare systems. Three methodological innovations for this field of applied research are discussed: (1) how dynamic models help us understand the timing of effects, (2) how parameter heterogeneity can be used to compare performance across countries, and (3) how multiple imputation can be used to deal with incomplete data. We illustrate these methodological strategies with an analysis of infant mortality rates in 21 OECD countries between 1960 and 2008 using OECD Health Data. Copyright © 2013 The Author. Published by Elsevier Ireland Ltd.. All rights reserved.

A cross-sectional survey of 5-year-old children with non-syndromic unilateral cleft lip and palate: the Cleft Care UK study. Part 1: background and methodology.

PubMed

Persson, M; Sandy, J R; Waylen, A; Wills, A K; Al-Ghatam, R; Ireland, A J; Hall, A J; Hollingworth, W; Jones, T; Peters, T J; Preston, R; Sell, D; Smallridge, J; Worthington, H; Ness, A R

2015-11-01

We describe the methodology for a major study investigating the impact of reconfigured cleft care in the United Kingdom (UK) 15 years after an initial survey, detailed in the Clinical Standards Advisory Group (CSAG) report in 1998, had informed government recommendations on centralization. This is a UK multicentre cross-sectional study of 5-year-olds born with non-syndromic unilateral cleft lip and palate. Children born between 1 April 2005 and 31 March 2007 were seen in cleft centre audit clinics. Consent was obtained for the collection of routine clinical measures (speech recordings, hearing, photographs, models, oral health, psychosocial factors) and anthropometric measures (height, weight, head circumference). The methodology for each clinical measure followed those of the earlier survey as closely as possible. We identified 359 eligible children and recruited 268 (74.7%) to the study. Eleven separate records for each child were collected at the audit clinics. In total, 2666 (90.4%) were collected from a potential 2948 records. The response rates for the self-reported questionnaires, completed at home, were 52.6% for the Health and Lifestyle Questionnaire and 52.2% for the Satisfaction with Service Questionnaire. Response rates and measures were similar to those achieved in the previous survey. There are practical, administrative and methodological challenges in repeating cross-sectional surveys 15 years apart and producing comparable data. © 2015 The Authors. Orthodontics & Craniofacial Research Published by John Wiley & Sons Ltd.

Simple method for determining fullerene negative ion formation★

NASA Astrophysics Data System (ADS)

Felfli, Zineb; Msezane, Alfred Z.

2018-04-01

A robust potential wherein is embedded the crucial core-polarization interaction is used in the Regge-pole methodology to calculate low-energy electron elastic scattering total cross section for the C60 fullerene in the electron impact energy range 0.02 ≤ E ≤ 10.0 eV. The energy position of the characteristic dramatically sharp resonance appearing at the second Ramsauer-Townsend minimum of the total cross section representing stable C60 - fullerene negative ion formation agrees excellently with the measured electron affinity of C60 [Huang et al., J. Chem. Phys. 140, 224315 (2014)]. The benchmarked potential and the Regge-pole methodology are then used to calculate electron elastic scattering total cross sections for selected fullerenes, from C54 through C240. The total cross sections are found to be characterized generally by Ramsauer-Townsend minima, shape resonances and dramatically sharp resonances representing long-lived states of fullerene negative ion formation. For the total cross sections of C70, C76, C78, and C84 the agreement between the energy positions of the very sharp resonances and the measured electron affinities is outstanding. Additionally, we compare our extracted energy positions of the resultant fullerene anions from our calculated total cross sections of the C86, C90 and C92 fullerenes with the estimated electron affinities ≥3.0 eV by the experiment [Boltalina et al., Rapid Commun. Mass Spectrom. 7, 1009 (1993)]. Resonance energy positions of other fullerenes, including C180 and C240 are also obtained. Most of the total cross sections presented in this paper are the first and only; our novel approach is general and should be applicable to other fullerenes as well and complex heavy atoms, such as the lanthanide atoms. We conclude with a remark on the catalytic properties of the fullerenes through their negative ions.

2016 Service Academy Gender Relations Survey: Overview Report

DTIC Science & Technology

2017-02-01

environment within the Academies. This Executive Summary will provide a summary of the methodology used and the top line results from the survey.1 Summary...discussion of the measurement constructs, a description of the survey methodology , and detailed presentation of the results. Each report section...are determined statistically significant at an alpha (α) level of .05.6 Survey Methodology Statistical Design OPA conducts cross-Service surveys that

A Physics-Based Engineering Methodology for Calculating Soft Error Rates of Bulk CMOS and SiGe Heterojunction Bipolar Transistor Integrated Circuits

NASA Astrophysics Data System (ADS)

Fulkerson, David E.

2010-02-01

This paper describes a new methodology for characterizing the electrical behavior and soft error rate (SER) of CMOS and SiGe HBT integrated circuits that are struck by ions. A typical engineering design problem is to calculate the SER of a critical path that commonly includes several circuits such as an input buffer, several logic gates, logic storage, clock tree circuitry, and an output buffer. Using multiple 3D TCAD simulations to solve this problem is too costly and time-consuming for general engineering use. The new and simple methodology handles the problem with ease by simple SPICE simulations. The methodology accurately predicts the measured threshold linear energy transfer (LET) of a bulk CMOS SRAM. It solves for circuit currents and voltage spikes that are close to those predicted by expensive 3D TCAD simulations. It accurately predicts the measured event cross-section vs. LET curve of an experimental SiGe HBT flip-flop. The experimental cross section vs. frequency behavior and other subtle effects are also accurately predicted.

Experimental and theoretical electron-scattering cross-section data for dichloromethane

NASA Astrophysics Data System (ADS)

Krupa, K.; Lange, E.; Blanco, F.; Barbosa, A. S.; Pastega, D. F.; Sanchez, S. d'A.; Bettega, M. H. F.; García, G.; Limão-Vieira, P.; Ferreira da Silva, F.

2018-04-01

We report on a combination of experimental and theoretical investigations into the elastic differential cross sections (DCSs) and integral cross sections for electron interactions with dichloromethane, C H2C l2 , in the incident electron energy over the 7.0-30 eV range. Elastic electron-scattering cross-section calculations have been performed within the framework of the Schwinger multichannel method implemented with pseudopotentials (SMCPP), and the independent-atom model with screening-corrected additivity rule including interference-effects correction (IAM-SCAR+I). The present elastic DCSs have been found to agree reasonably well with the results of IAM-SCAR+I calculations above 20 eV and also with the SMC calculations below 30 eV. Although some discrepancies were found for 7 eV, the agreement between the two theoretical methodologies is remarkable as the electron-impact energy increases. Calculated elastic DCSs are also reported up to 10000 eV for scattering angles from 0° to 180° together with total cross section within the IAM-SCAR+I framework.

Methodology for safety optimization of highway cross-sections for horizontal curves with restricted sight distance.

PubMed

Ibrahim, Shewkar E; Sayed, Tarek; Ismail, Karim

2012-11-01

Several earlier studies have noted the shortcomings with existing geometric design guides which provide deterministic standards. In these standards the safety margin of the design output is generally unknown and there is little knowledge of the safety implications of deviating from the standards. To mitigate these shortcomings, probabilistic geometric design has been advocated where reliability analysis can be used to account for the uncertainty in the design parameters and to provide a mechanism for risk measurement to evaluate the safety impact of deviations from design standards. This paper applies reliability analysis for optimizing the safety of highway cross-sections. The paper presents an original methodology to select a suitable combination of cross-section elements with restricted sight distance to result in reduced collisions and consistent risk levels. The purpose of this optimization method is to provide designers with a proactive approach to the design of cross-section elements in order to (i) minimize the risk associated with restricted sight distance, (ii) balance the risk across the two carriageways of the highway, and (iii) reduce the expected collision frequency. A case study involving nine cross-sections that are parts of two major highway developments in British Columbia, Canada, was presented. The results showed that an additional reduction in collisions can be realized by incorporating the reliability component, P(nc) (denoting the probability of non-compliance), in the optimization process. The proposed approach results in reduced and consistent risk levels for both travel directions in addition to further collision reductions. Copyright © 2012 Elsevier Ltd. All rights reserved.

Cross-sectional and longitudinal epidemiological studies of Internet gaming disorder: A systematic review of the literature.

PubMed

Mihara, Satoko; Higuchi, Susumu

2017-07-01

The diagnostic criteria of Internet gaming disorder (IGD) have been included in section III of DSM-5. This study aims to systematically review both cross-sectional and longitudinal epidemiological studies of IGD. All publications included in PubMed and PsychINFO up to May 2016 were systematically searched to identify cross-sectional studies on prevalence and longitudinal studies of IGD. In the process of identification, articles in non-English languages and studies focusing solely on the use of gaming were excluded, and those meeting the methodological requirements set by this review were included. As a result, 37 cross-sectional and 13 longitudinal studies were selected for review. The prevalence of IGD in the total samples ranged from 0.7% to 27.5%. The prevalence was higher among males than females in the vast majority of studies and tended to be higher among younger rather than older people in some studies. Geographical region made little difference to prevalence. Factors associated with IGD were reported in 28 of 37 cross-sectional studies. These were diverse and covered gaming, demographic and familial factors, interpersonal relations, social and school functioning, personality, psychiatric comorbidity, and physical health conditions. Longitudinal studies identified risk and protective factors, and health and social consequences of IGD. The natural course of IGD was diverse but tended to be more stable among adolescents compared to adults. Although existing epidemiological studies have provided useful data, differences in methodologies make it difficult to compare the findings of these studies when drawing consensus. Future international studies using reliable and uniform methods are warranted. © 2017 The Authors. Psychiatry and Clinical Neurosciences © 2017 Japanese Society of Psychiatry and Neurology.

A cross-sectional survey of 5-year-old children with non-syndromic unilateral cleft lip and palate: the Cleft Care UK study. Part 1: background and methodology

PubMed Central

Persson, M; Sandy, J R; Waylen, A; Wills, A K; Al-Ghatam, R; Ireland, A J; Hall, A J; Hollingworth, W; Jones, T; Peters, T J; Preston, R; Sell, D; Smallridge, J; Worthington, H; Ness, A R

2015-01-01

Structured Abstract Objectives We describe the methodology for a major study investigating the impact of reconfigured cleft care in the United Kingdom (UK) 15 years after an initial survey, detailed in the Clinical Standards Advisory Group (CSAG) report in 1998, had informed government recommendations on centralization. Setting and Sample Population This is a UK multicentre cross-sectional study of 5-year-olds born with non-syndromic unilateral cleft lip and palate. Children born between 1 April 2005 and 31 March 2007 were seen in cleft centre audit clinics. Materials and Methods Consent was obtained for the collection of routine clinical measures (speech recordings, hearing, photographs, models, oral health, psychosocial factors) and anthropometric measures (height, weight, head circumference). The methodology for each clinical measure followed those of the earlier survey as closely as possible. Results We identified 359 eligible children and recruited 268 (74.7%) to the study. Eleven separate records for each child were collected at the audit clinics. In total, 2666 (90.4%) were collected from a potential 2948 records. The response rates for the self-reported questionnaires, completed at home, were 52.6% for the Health and Lifestyle Questionnaire and 52.2% for the Satisfaction with Service Questionnaire. Conclusions Response rates and measures were similar to those achieved in the previous survey. There are practical, administrative and methodological challenges in repeating cross-sectional surveys 15 years apart and producing comparable data. PMID:26567851

An entropy-based method for determining the flow depth distribution in natural channels

NASA Astrophysics Data System (ADS)

Moramarco, Tommaso; Corato, Giovanni; Melone, Florisa; Singh, Vijay P.

2013-08-01

A methodology for determining the bathymetry of river cross-sections during floods by the sampling of surface flow velocity and existing low flow hydraulic data is developed . Similar to Chiu (1988) who proposed an entropy-based velocity distribution, the flow depth distribution in a cross-section of a natural channel is derived by entropy maximization. The depth distribution depends on one parameter, whose estimate is straightforward, and on the maximum flow depth. Applying to a velocity data set of five river gage sites, the method modeled the flow area observed during flow measurements and accurately assessed the corresponding discharge by coupling the flow depth distribution and the entropic relation between mean velocity and maximum velocity. The methodology unfolds a new perspective for flow monitoring by remote sensing, considering that the two main quantities on which the methodology is based, i.e., surface flow velocity and flow depth, might be potentially sensed by new sensors operating aboard an aircraft or satellite.

Estimating onset time from longitudinal and cross-sectional data with an application to estimating gestational age from longitudinal maternal anthropometry during pregnancy and neonatal anthropometry at birth.

PubMed

Ortega-Villa, Ana Maria; Grantz, Katherine L; Albert, Paul S

2018-06-01

Determining the date of conception is important for estimating gestational age and monitoring whether the fetus and mother are on track in their development and pregnancy. Various methods based on ultrasound have been proposed for dating a pregnancy in high resource countries. However, such techniques may not be available in under-resourced countries. We develop a shared random parameter model for estimating the date of conception using longitudinal assessment of multiple maternal anthropometry and cross-sectional neonatal anthropometry. The methodology is evaluated with a training-test set paradigm as well as with simulations to examine the robustness of the method to model misspecification. We illustrate this new methodology with data from the NICHD Fetal Growth Studies.

A Conceptual/Cross-cultural Model for Teaching Anthropology in the Elementary School.

ERIC Educational Resources Information Center

Dynneson, Thomas L.

A conceptual/cross-cultural model, developed to help elementary teachers cope with the problems of initiating cultural, ethnic, or anthropology studies, is presented in five sections. (1) A brief description of the structure and methodology of anthropology defines in outline form the fields of cultural and social anthropology, physical…

Recognizing the Needs of the Homeless.

ERIC Educational Resources Information Center

France, Joseph B.

This paper summarizes reports and research on the homeless in the United States, presents findings of a survey of Red Cross chapters on services to the homeless, and describes programs for the homeless of selected Red Cross chapters. Section 1 discusses definitions of homelessness and methodologies used to count homeless people. The homeless are…

Obtaining Cross-Sections of Paint Layers in Cultural Artifacts Using Femtosecond Pulsed Lasers

PubMed Central

Harada, Takaaki; Spence, Stephanie; Margiolakis, Athanasios; Deckoff-Jones, Skylar; Ploeger, Rebecca; Shugar, Aaron N.; Hamm, James F.; Dani, Keshav M.; Dani, Anya R.

2017-01-01

Recently, ultrafast lasers exhibiting high peak powers and extremely short pulse durations have created a new paradigm in materials processing. The precision and minimal thermal damage provided by ultrafast lasers in the machining of metals and dielectrics also suggests a novel application in obtaining precise cross-sections of fragile, combustible paint layers in artwork and cultural heritage property. Cross-sections of paint and other decorative layers on artwork provide critical information into its history and authenticity. However, the current methodology which uses a scalpel to obtain a cross-section can cause further damage, including crumbling, delamination, and paint compression. Here, we demonstrate the ability to make controlled cross-sections of paint layers with a femtosecond pulsed laser, with minimal damage to the surrounding artwork. The femtosecond laser cutting overcomes challenges such as fragile paint disintegrating under scalpel pressure, or oxidation by the continuous-wave (CW) laser. Variations in laser power and translational speed of the laser while cutting exhibit different benefits for cross-section sampling. The use of femtosecond lasers in studying artwork also presents new possibilities in analyzing, sampling, and cleaning of artwork with minimal destructive effects. PMID:28772468

Obtaining Cross-Sections of Paint Layers in Cultural Artifacts Using Femtosecond Pulsed Lasers.

PubMed

Harada, Takaaki; Spence, Stephanie; Margiolakis, Athanasios; Deckoff-Jones, Skylar; Ploeger, Rebecca; Shugar, Aaron N; Hamm, James F; Dani, Keshav M; Dani, Anya R

2017-01-26

Recently, ultrafast lasers exhibiting high peak powers and extremely short pulse durations have created a new paradigm in materials processing. The precision and minimal thermal damage provided by ultrafast lasers in the machining of metals and dielectrics also suggests a novel application in obtaining precise cross-sections of fragile, combustible paint layers in artwork and cultural heritage property. Cross-sections of paint and other decorative layers on artwork provide critical information into its history and authenticity. However, the current methodology which uses a scalpel to obtain a cross-section can cause further damage, including crumbling, delamination, and paint compression. Here, we demonstrate the ability to make controlled cross-sections of paint layers with a femtosecond pulsed laser, with minimal damage to the surrounding artwork. The femtosecond laser cutting overcomes challenges such as fragile paint disintegrating under scalpel pressure, or oxidation by the continuous-wave (CW) laser. Variations in laser power and translational speed of the laser while cutting exhibit different benefits for cross-section sampling. The use of femtosecond lasers in studying artwork also presents new possibilities in analyzing, sampling, and cleaning of artwork with minimal destructive effects.

An ultrasonic methodology for muscle cross section measurement of support space flight

NASA Astrophysics Data System (ADS)

Hatfield, Thomas R.; Klaus, David M.; Simske, Steven J.

2004-09-01

The number one priority for any manned space mission is the health and safety of its crew. The study of the short and long term physiological effects on humans is paramount to ensuring crew health and mission success. One of the challenges associated in studying the physiological effects of space flight on humans, such as loss of bone and muscle mass, has been that of readily attaining the data needed to characterize the changes. The small sampling size of astronauts, together with the fact that most physiological data collection tends to be rather tedious, continues to hinder elucidation of the underlying mechanisms responsible for the observed changes that occur in space. Better characterization of the muscle loss experienced by astronauts requires that new technologies be implemented. To this end, we have begun to validate a 360° ultrasonic scanning methodology for muscle measurements and have performed empirical sampling of a limb surrogate for comparison. Ultrasonic wave propagation was simulated using 144 stations of rotated arm and calf MRI images. These simulations were intended to provide a preliminary check of the scanning methodology and data analysis before its implementation with hardware. Pulse-echo waveforms were processed for each rotation station to characterize fat, muscle, bone, and limb boundary interfaces. The percentage error between MRI reference values and calculated muscle areas, as determined from reflection points for calf and arm cross sections, was -2.179% and +2.129%, respectively. These successful simulations suggest that ultrasound pulse scanning can be used to effectively determine limb cross-sectional areas. Cross-sectional images of a limb surrogate were then used to simulate signal measurements at several rotation angles, with ultrasonic pulse-echo sampling performed experimentally at the same stations on the actual limb surrogate to corroborate the results. The objective of the surrogate sampling was to compare the signal output of the simulation tool used as a methodology validation for actual tissue signals. The disturbance patterns of the simulated and sampled waveforms were consistent. Although only discussed as a small part of the work presented, the sampling portion also helped identify important considerations such as tissue compression and transducer positioning for future work involving tissue scanning with this methodology.

Methodological quality of meta-analyses on treatments for chronic obstructive pulmonary disease: a cross-sectional study using the AMSTAR (Assessing the Methodological Quality of Systematic Reviews) tool.

PubMed

Ho, Robin S T; Wu, Xinyin; Yuan, Jinqiu; Liu, Siya; Lai, Xin; Wong, Samuel Y S; Chung, Vincent C H

2015-01-08

Meta-analysis (MA) of randomised trials is considered to be one of the best approaches for summarising high-quality evidence on the efficacy and safety of treatments. However, methodological flaws in MAs can reduce the validity of conclusions, subsequently impairing the quality of decision making. To assess the methodological quality of MAs on COPD treatments. A cross-sectional study on MAs of COPD trials. MAs published during 2000-2013 were sampled from the Cochrane Database of Systematic Reviews and Database of Abstracts of Reviews of Effect. Methodological quality was assessed using the validated AMSTAR (Assessing the Methodological Quality of Systematic Reviews) tool. Seventy-nine MAs were sampled. Only 18% considered the scientific quality of primary studies when formulating conclusions and 49% used appropriate meta-analytic methods to combine findings. The problems were particularly acute among MAs on pharmacological treatments. In 48% of MAs the authors did not report conflict of interest. Fifty-eight percent reported harmful effects of treatment. Publication bias was not assessed in 65% of MAs, and only 10% had searched non-English databases. The methodological quality of the included MAs was disappointing. Consideration of scientific quality when formulating conclusions should be made explicit. Future MAs should improve on reporting conflict of interest and harm, assessment of publication bias, prevention of language bias and use of appropriate meta-analytic methods.

Methodological quality of meta-analyses on treatments for chronic obstructive pulmonary disease: a cross-sectional study using the AMSTAR (Assessing the Methodological Quality of Systematic Reviews) tool

PubMed Central

Ho, Robin ST; Wu, Xinyin; Yuan, Jinqiu; Liu, Siya; Lai, Xin; Wong, Samuel YS; Chung, Vincent CH

2015-01-01

Background: Meta-analysis (MA) of randomised trials is considered to be one of the best approaches for summarising high-quality evidence on the efficacy and safety of treatments. However, methodological flaws in MAs can reduce the validity of conclusions, subsequently impairing the quality of decision making. Aims: To assess the methodological quality of MAs on COPD treatments. Methods: A cross-sectional study on MAs of COPD trials. MAs published during 2000–2013 were sampled from the Cochrane Database of Systematic Reviews and Database of Abstracts of Reviews of Effect. Methodological quality was assessed using the validated AMSTAR (Assessing the Methodological Quality of Systematic Reviews) tool. Results: Seventy-nine MAs were sampled. Only 18% considered the scientific quality of primary studies when formulating conclusions and 49% used appropriate meta-analytic methods to combine findings. The problems were particularly acute among MAs on pharmacological treatments. In 48% of MAs the authors did not report conflict of interest. Fifty-eight percent reported harmful effects of treatment. Publication bias was not assessed in 65% of MAs, and only 10% had searched non-English databases. Conclusions: The methodological quality of the included MAs was disappointing. Consideration of scientific quality when formulating conclusions should be made explicit. Future MAs should improve on reporting conflict of interest and harm, assessment of publication bias, prevention of language bias and use of appropriate meta-analytic methods. PMID:25569783

Unified nonlinear analysis for nonhomogeneous anisotropic beams with closed cross sections

NASA Technical Reports Server (NTRS)

Atilgan, Ali R.; Hodges, Dewey H.

1991-01-01

A unified methodology for geometrically nonlinear analysis of nonhomogeneous, anisotropic beams is presented. A 2D cross-sectional analysis and a nonlinear 1D global deformation analysis are derived from the common framework of a 3D, geometrically nonlinear theory of elasticity. The only restrictions are that the strain and local rotation are small compared to unity and that warping displacements are small relative to the cross-sectional dimensions. It is concluded that the warping solutions can be affected by large deformation and that this could alter the incremental stiffnes of the section. It is shown that sectional constants derived from the published, linear analysis can be used in the present nonlinear, 1D analysis governing the global deformation of the beam, which is based on intrinsic equations for nonlinear beam behavior. Excellent correlation is obtained with published experimental results for both isotropic and anisotropic beams undergoing large deflections.

Methodology and issues of integral experiments selection for nuclear data validation

NASA Astrophysics Data System (ADS)

Tatiana, Ivanova; Ivanov, Evgeny; Hill, Ian

2017-09-01

Nuclear data validation involves a large suite of Integral Experiments (IEs) for criticality, reactor physics and dosimetry applications. [1] Often benchmarks are taken from international Handbooks. [2, 3] Depending on the application, IEs have different degrees of usefulness in validation, and usually the use of a single benchmark is not advised; indeed, it may lead to erroneous interpretation and results. [1] This work aims at quantifying the importance of benchmarks used in application dependent cross section validation. The approach is based on well-known General Linear Least Squared Method (GLLSM) extended to establish biases and uncertainties for given cross sections (within a given energy interval). The statistical treatment results in a vector of weighting factors for the integral benchmarks. These factors characterize the value added by a benchmark for nuclear data validation for the given application. The methodology is illustrated by one example, selecting benchmarks for 239Pu cross section validation. The studies were performed in the framework of Subgroup 39 (Methods and approaches to provide feedback from nuclear and covariance data adjustment for improvement of nuclear data files) established at the Working Party on International Nuclear Data Evaluation Cooperation (WPEC) of the Nuclear Science Committee under the Nuclear Energy Agency (NEA/OECD).

Methodology Series Module 3: Cross-sectional Studies.

PubMed

Setia, Maninder Singh

2016-01-01

Cross-sectional study design is a type of observational study design. In a cross-sectional study, the investigator measures the outcome and the exposures in the study participants at the same time. Unlike in case-control studies (participants selected based on the outcome status) or cohort studies (participants selected based on the exposure status), the participants in a cross-sectional study are just selected based on the inclusion and exclusion criteria set for the study. Once the participants have been selected for the study, the investigator follows the study to assess the exposure and the outcomes. Cross-sectional designs are used for population-based surveys and to assess the prevalence of diseases in clinic-based samples. These studies can usually be conducted relatively faster and are inexpensive. They may be conducted either before planning a cohort study or a baseline in a cohort study. These types of designs will give us information about the prevalence of outcomes or exposures; this information will be useful for designing the cohort study. However, since this is a 1-time measurement of exposure and outcome, it is difficult to derive causal relationships from cross-sectional analysis. We can estimate the prevalence of disease in cross-sectional studies. Furthermore, we will also be able to estimate the odds ratios to study the association between exposure and the outcomes in this design.

Methodology Series Module 3: Cross-sectional Studies

PubMed Central

Setia, Maninder Singh

2016-01-01

Cross-sectional study design is a type of observational study design. In a cross-sectional study, the investigator measures the outcome and the exposures in the study participants at the same time. Unlike in case–control studies (participants selected based on the outcome status) or cohort studies (participants selected based on the exposure status), the participants in a cross-sectional study are just selected based on the inclusion and exclusion criteria set for the study. Once the participants have been selected for the study, the investigator follows the study to assess the exposure and the outcomes. Cross-sectional designs are used for population-based surveys and to assess the prevalence of diseases in clinic-based samples. These studies can usually be conducted relatively faster and are inexpensive. They may be conducted either before planning a cohort study or a baseline in a cohort study. These types of designs will give us information about the prevalence of outcomes or exposures; this information will be useful for designing the cohort study. However, since this is a 1-time measurement of exposure and outcome, it is difficult to derive causal relationships from cross-sectional analysis. We can estimate the prevalence of disease in cross-sectional studies. Furthermore, we will also be able to estimate the odds ratios to study the association between exposure and the outcomes in this design. PMID:27293245

[IBEAS design: adverse events prevalence in Latin American hospitals].

PubMed

Aranaz-Andrés, J M; Aibar-Remón, C; Limón-Ramírez, R; Amarilla, A; Restrepo, F R; Urroz, O; Sarabia, O; Inga, R; Santivañez, A; Gonseth-García, J; Larizgoitia-Jauregui, I; Agra-Varela, Y; Terol-García, E

2011-01-01

To describe the methodological characteristics of the IBEAS study: adverse events prevalence in Latin American hospitals, with the aim of analysing the magnitude, significance and impact of adverse events (AE); to identify the main problems associated with patient safety AE; to increase the capacity of professionals involved in patient safety; and the setting up of patient safety agendas in the participating countries. A patient safety study launched in 35 Latin American hospitals through the analysis of AE in 5 countries: Argentina, Colombia, Costa Rica, Mexico and Peru, using a cross-sectional study using a review of clinical records as the main method. The implications of using a cross-sectional design when studying AE are described, in terms of resources required, internal validity and usefulness related to risk management. The cross-sectional design seems an efficient methodology in terms of time and resources spent, as well as being easy to carry out. Although the cross-sectional design does not review the all hospital episodes, it is able to provide a reliable estimate of prevalence and to support a surveillance system. Because of a possible survival bias, it is likely that the AE which led to hospital admissions will be overestimated, as well as the health related infections or those adverse events which are difficult to identify if the patient is not examined (e.g. contusions). Communication with the ward staff (if the patient is still hospitalised) help in finding the causality and their prevention. Copyright © 2010 SECA. Published by Elsevier Espana. All rights reserved.

A New Method for Generating Probability Tables in the Unresolved Resonance Region

DOE PAGES

Holcomb, Andrew M.; Leal, Luiz C.; Rahnema, Farzad; ...

2017-04-18

One new method for constructing probability tables in the unresolved resonance region (URR) has been developed. This new methodology is an extensive modification of the single-level Breit-Wigner (SLBW) pseudo-resonance pair sequence method commonly used to generate probability tables in the URR. The new method uses a Monte Carlo process to generate many pseudo-resonance sequences by first sampling the average resonance parameter data in the URR and then converting the sampled resonance parameters to the more robust R-matrix limited (RML) format. Furthermore, for each sampled set of pseudo-resonance sequences, the temperature-dependent cross sections are reconstructed on a small grid around themore » energy of reference using the Reich-Moore formalism and the Leal-Hwang Doppler broadening methodology. We then use the effective cross sections calculated at the energies of reference to construct probability tables in the URR. The RML cross-section reconstruction algorithm has been rigorously tested for a variety of isotopes, including 16O, 19F, 35Cl, 56Fe, 63Cu, and 65Cu. The new URR method also produced normalized cross-section factor probability tables for 238U that were found to be in agreement with current standards. The modified 238U probability tables were shown to produce results in excellent agreement with several standard benchmarks, including the IEU-MET-FAST-007 (BIG TEN), IEU-MET-FAST-003, and IEU-COMP-FAST-004 benchmarks.« less

Preliminary structural design of composite main rotor blades for minimum weight

NASA Technical Reports Server (NTRS)

Nixon, Mark W.

1987-01-01

A methodology is developed to perform minimum weight structural design for composite or metallic main rotor blades subject to aerodynamic performance, material strength, autorotation, and frequency constraints. The constraints and load cases are developed such that the final preliminary rotor design will satisfy U.S. Army military specifications, as well as take advantage of the versatility of composite materials. A minimum weight design is first developed subject to satisfying the aerodynamic performance, strength, and autorotation constraints for all static load cases. The minimum weight design is then dynamically tuned to avoid resonant frequencies occurring at the design rotor speed. With this methodology, three rotor blade designs were developed based on the geometry of the UH-60A Black Hawk titanium-spar rotor blade. The first design is of a single titanium-spar cross section, which is compared with the UH-60A Black Hawk rotor blade. The second and third designs use single and multiple graphite/epoxy-spar cross sections. These are compared with the titanium-spar design to demonstrate weight savings from use of this design methodology in conjunction with advanced composite materials.

Systematic effects on cross section data derived from reaction rates in reactor spectra and a re-analysis of 241Am reactor activation measurements

NASA Astrophysics Data System (ADS)

Žerovnik, Gašper; Schillebeeckx, Peter; Becker, Björn; Fiorito, Luca; Harada, Hideo; Kopecky, Stefan; Radulović, Vladimir; Sano, Tadafumi

2018-01-01

Methodologies to derive cross section data from spectrum integrated reaction rates were studied. The Westcott convention and some of its approximations were considered. Mostly measurements without and with transmission filter are combined to determine the reaction cross section at thermal energy together with the resonance integral. The accuracy of the results strongly depends on the assumptions that are made about the neutron energy distribution, which is mostly parameterised as a sum of a thermal and an epi-thermal component. Resonance integrals derived from such data can be strongly biased and should only be used in case no other data are available. The cross section at thermal energy can be biased for reaction cross sections which are dominated by low energy resonances. The amplitude of the effect is related to the lower energy limit that is used for the epi-thermal component of the neutron energy distribution. It is less affected by the assumptions on the shape of the energy distribution. When the energy dependence of the cross section is known and information about the neutron energy distribution is available, a method to correct for a bias on the cross section at thermal energy is proposed. Reactor activation measurements to determine the thermal 241Am(n, γ) cross section reported in the literature were reviewed. In case enough information was available, the results were corrected to account for possible biases and included in a least squares fit. These data combined with results of time-of-flight measurements give a capture cross section 720 (14) b for 241Am(n, γ) at thermal energy.

Advanced nodal neutron diffusion method with space-dependent cross sections: ILLICO-VX

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rajic, H.L.; Ougouag, A.M.

1987-01-01

Advanced transverse integrated nodal methods for neutron diffusion developed since the 1970s require that node- or assembly-homogenized cross sections be known. The underlying structural heterogeneity can be accurately accounted for in homogenization procedures by the use of heterogeneity or discontinuity factors. Other (milder) types of heterogeneity, burnup-induced or due to thermal-hydraulic feedback, can be resolved by explicitly accounting for the spatial variations of material properties. This can be done during the nodal computations via nonlinear iterations. The new method has been implemented in the code ILLICO-VX (ILLICO variable cross-section method). Numerous numerical tests were performed. As expected, the convergence ratemore » of ILLICO-VX is lower than that of ILLICO, requiring approx. 30% more outer iterations per k/sub eff/ computation. The methodology has also been implemented as the NOMAD-VX option of the NOMAD, multicycle, multigroup, two- and three-dimensional nodal diffusion depletion code. The burnup-induced heterogeneities (space dependence of cross sections) are calculated during the burnup steps.« less

Sensitivity analysis of TRX-2 lattice parameters with emphasis on epithermal /sup 238/U capture. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tomlinson, E.T.; deSaussure, G.; Weisbin, C.R.

1977-03-01

The main purpose of the study is the determination of the sensitivity of TRX-2 thermal lattice performance parameters to nuclear cross section data, particularly the epithermal resonance capture cross section of /sup 238/U. An energy-dependent sensitivity profile was generated for each of the performance parameters, to the most important cross sections of the various isotopes in the lattice. Uncertainties in the calculated values of the performance parameters due to estimated uncertainties in the basic nuclear data, deduced in this study, were shown to be small compared to the uncertainties in the measured values of the performance parameter and compared tomore » differences among calculations based upon the same data but with different methodologies.« less

Evaluation of the Neutron Data Standards

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carlson, A. D.; Pronyaev, V. G.; Capote, R.

With the need for improving existing nuclear data evaluations, (e.g., ENDF/B-VIII.0 and JEFF-3.3 releases) the first step was to evaluate the standards for use in such a library. This new standards evaluation made use of improved experimental data and some developments in the methodology of analysis and evaluation. In addition to the work on the traditional standards, this work produced the extension of some energy ranges and includes new reactions that are called reference cross sections. Since the effort extends beyond the traditional standards, it is called the neutron data standards evaluation. This international effort has produced new evaluations ofmore » the following cross section standards: the H(n,n), 6Li(n,t), 10B(n,α), 10B(n,α 1γ), natC(n,n), Au(n,γ), 235U(n,f) and 238U(n,f). Also in the evaluation process the 238U(n,γ) and 239Pu(n,f) cross sections that are not standards were evaluated. Evaluations were also obtained for data that are not traditional standards: the Maxwellian spectrum averaged cross section for the Au(n,γ) cross section at 30 keV; reference cross sections for prompt γ-ray production in fast neutron-induced reactions; reference cross sections for very high energy fission cross sections; the 252Cf spontaneous fission neutron spectrum and the 235U prompt fission neutron spectrum induced by thermal incident neutrons; and the thermal neutron constants. The data and covariance matrices of the uncertainties were obtained directly from the evaluation procedure.« less

Evaluation of the Neutron Data Standards

DOE PAGES

Carlson, A. D.; Pronyaev, V. G.; Capote, R.; ...

2018-02-01

With the need for improving existing nuclear data evaluations, (e.g., ENDF/B-VIII.0 and JEFF-3.3 releases) the first step was to evaluate the standards for use in such a library. This new standards evaluation made use of improved experimental data and some developments in the methodology of analysis and evaluation. In addition to the work on the traditional standards, this work produced the extension of some energy ranges and includes new reactions that are called reference cross sections. Since the effort extends beyond the traditional standards, it is called the neutron data standards evaluation. This international effort has produced new evaluations ofmore » the following cross section standards: the H(n,n), 6Li(n,t), 10B(n,α), 10B(n,α 1γ), natC(n,n), Au(n,γ), 235U(n,f) and 238U(n,f). Also in the evaluation process the 238U(n,γ) and 239Pu(n,f) cross sections that are not standards were evaluated. Evaluations were also obtained for data that are not traditional standards: the Maxwellian spectrum averaged cross section for the Au(n,γ) cross section at 30 keV; reference cross sections for prompt γ-ray production in fast neutron-induced reactions; reference cross sections for very high energy fission cross sections; the 252Cf spontaneous fission neutron spectrum and the 235U prompt fission neutron spectrum induced by thermal incident neutrons; and the thermal neutron constants. The data and covariance matrices of the uncertainties were obtained directly from the evaluation procedure.« less

Evaluation of the Neutron Data Standards

NASA Astrophysics Data System (ADS)

Carlson, A. D.; Pronyaev, V. G.; Capote, R.; Hale, G. M.; Chen, Z.-P.; Duran, I.; Hambsch, F.-J.; Kunieda, S.; Mannhart, W.; Marcinkevicius, B.; Nelson, R. O.; Neudecker, D.; Noguere, G.; Paris, M.; Simakov, S. P.; Schillebeeckx, P.; Smith, D. L.; Tao, X.; Trkov, A.; Wallner, A.; Wang, W.

2018-02-01

With the need for improving existing nuclear data evaluations, (e.g., ENDF/B-VIII.0 and JEFF-3.3 releases) the first step was to evaluate the standards for use in such a library. This new standards evaluation made use of improved experimental data and some developments in the methodology of analysis and evaluation. In addition to the work on the traditional standards, this work produced the extension of some energy ranges and includes new reactions that are called reference cross sections. Since the effort extends beyond the traditional standards, it is called the neutron data standards evaluation. This international effort has produced new evaluations of the following cross section standards: the H(n,n), 6Li(n,t), 10B(n,α), 10B(n,α1 γ), natC(n,n), Au(n,γ), 235U(n,f) and 238U(n,f). Also in the evaluation process the 238U(n,γ) and 239Pu(n,f) cross sections that are not standards were evaluated. Evaluations were also obtained for data that are not traditional standards: the Maxwellian spectrum averaged cross section for the Au(n,γ) cross section at 30 keV; reference cross sections for prompt γ-ray production in fast neutron-induced reactions; reference cross sections for very high energy fission cross sections; the 252Cf spontaneous fission neutron spectrum and the 235U prompt fission neutron spectrum induced by thermal incident neutrons; and the thermal neutron constants. The data and covariance matrices of the uncertainties were obtained directly from the evaluation procedure.

The Neighbourhood Effects on Health and Well-being (NEHW) study.

PubMed

O'Campo, Patricia; Wheaton, Blair; Nisenbaum, Rosane; Glazier, Richard H; Dunn, James R; Chambers, Catharine

2015-01-01

Many cross-sectional studies of neighbourhood effects on health do not employ strong study design elements. The Neighbourhood Effects on Health and Well-being (NEHW) study, a random sample of 2412 English-speaking Toronto residents (age 25-64), utilises strong design features for sampling neighbourhoods and individuals, characterising neighbourhoods using a variety of data sources, measuring a wide range of health outcomes, and for analysing cross-level interactions. We describe here methodological issues that shaped the design and analysis features of the NEHW study to ensure that, while a cross-sectional sample, it will advance the quality of evidence emerging from observational studies. Copyright © 2014 The Authors. Published by Elsevier Ltd.. All rights reserved.

Draw-and-Write Technique Elicits Children's Perceptions of Health in the USA and Guatemala

ERIC Educational Resources Information Center

Renslow, Jillian; Maupin, Jonathan

2018-01-01

Objective: Using the draw-and-write methodology, this study examined cross-cultural similarities and differences in children's perceptions of health. Design: Cross-sectional design. Setting: One public elementary school in the USA and in Guatemala. Method: The total sample included 161 children 9-10 years of age, 80 in the USA and 81 in Guatemala.…

Elastic stress analysis of general prismatic beams : final report.

DOT National Transportation Integrated Search

1980-01-01

This study developed a numerical methodology for the elastic stress analysis of general prismatic beams. The objective was to accurately determine stresses and displacements on a cross section of a beam where the stress resultants are prescribed. App...

Electron collisions with phenol: Total, integral, differential, and momentum transfer cross sections and the role of multichannel coupling effects on the elastic channel

DOE Office of Scientific and Technical Information (OSTI.GOV)

Costa, Romarly F. da; Centro de Ciências Naturais e Humanas, Universidade Federal do ABC, 09210-580 Santo André, São Paulo; Oliveira, Eliane M. de

2015-03-14

We report theoretical and experimental total cross sections for electron scattering by phenol (C{sub 6}H{sub 5}OH). The experimental data were obtained with an apparatus based in Madrid and the calculated cross sections with two different methodologies, the independent atom method with screening corrected additivity rule (IAM-SCAR), and the Schwinger multichannel method with pseudopotentials (SMCPP). The SMCPP method in the N{sub open}-channel coupling scheme, at the static-exchange-plus-polarization approximation, is employed to calculate the scattering amplitudes at impact energies ranging from 5.0 eV to 50 eV. We discuss the multichannel coupling effects in the calculated cross sections, in particular how the numbermore » of excited states included in the open-channel space impacts upon the convergence of the elastic cross sections at higher collision energies. The IAM-SCAR approach was also used to obtain the elastic differential cross sections (DCSs) and for correcting the experimental total cross sections for the so-called forward angle scattering effect. We found a very good agreement between our SMCPP theoretical differential, integral, and momentum transfer cross sections and experimental data for benzene (a molecule differing from phenol by replacing a hydrogen atom in benzene with a hydroxyl group). Although some discrepancies were found for lower energies, the agreement between the SMCPP data and the DCSs obtained with the IAM-SCAR method improves, as expected, as the impact energy increases. We also have a good agreement among the present SMCPP calculated total cross section (which includes elastic, 32 inelastic electronic excitation processes and ionization contributions, the latter estimated with the binary-encounter-Bethe model), the IAM-SCAR total cross section, and the experimental data when the latter is corrected for the forward angle scattering effect [Fuss et al., Phys. Rev. A 88, 042702 (2013)].« less

Structural damage continuous monitoring by using a data driven approach based on principal component analysis and cross-correlation analysis

NASA Astrophysics Data System (ADS)

Camacho-Navarro, Jhonatan; Ruiz, Magda; Villamizar, Rodolfo; Mujica, Luis; Moreno-Beltrán, Gustavo; Quiroga, Jabid

2017-05-01

Continuous monitoring for damage detection in structural assessment comprises implementation of low cost equipment and efficient algorithms. This work describes the stages involved in the design of a methodology with high feasibility to be used in continuous damage assessment. Specifically, an algorithm based on a data-driven approach by using principal component analysis and pre-processing acquired signals by means of cross-correlation functions, is discussed. A carbon steel pipe section and a laboratory tower were used as test structures in order to demonstrate the feasibility of the methodology to detect abrupt changes in the structural response when damages occur. Two types of damage cases are studied: crack and leak for each structure, respectively. Experimental results show that the methodology is promising in the continuous monitoring of real structures.

Alternative approximation concepts for space frame synthesis

NASA Technical Reports Server (NTRS)

Lust, R. V.; Schmit, L. A.

1985-01-01

A structural synthesis methodology for the minimum mass design of 3-dimensionall frame-truss structures under multiple static loading conditions and subject to limits on displacements, rotations, stresses, local buckling, and element cross-sectional dimensions is presented. A variety of approximation concept options are employed to yield near optimum designs after no more than 10 structural analyses. Available options include: (A) formulation of the nonlinear mathematcal programming problem in either reciprocal section property (RSP) or cross-sectional dimension (CSD) space; (B) two alternative approximate problem structures in each design space; and (C) three distinct assumptions about element end-force variations. Fixed element, design element linking, and temporary constraint deletion features are also included. The solution of each approximate problem, in either its primal or dual form, is obtained using CONMIN, a feasible directions program. The frame-truss synthesis methodology is implemented in the COMPASS computer program and is used to solve a variety of problems. These problems were chosen so that, in addition to exercising the various approximation concepts options, the results could be compared with previously published work.

A broad-group cross-section library based on ENDF/B-VII.0 for fast neutron dosimetry Applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Alpan, F.A.

2011-07-01

A new ENDF/B-VII.0-based coupled 44-neutron, 20-gamma-ray-group cross-section library was developed to investigate the latest evaluated nuclear data file (ENDF) ,in comparison to ENDF/B-VI.3 used in BUGLE-96, as well as to generate an objective-specific library. The objectives selected for this work consisted of dosimetry calculations for in-vessel and ex-vessel reactor locations, iron atom displacement calculations for reactor internals and pressure vessel, and {sup 58}Ni(n,{gamma}) calculation that is important for gas generation in the baffle plate. The new library was generated based on the contribution and point-wise cross-section-driven (CPXSD) methodology and was applied to one of the most widely used benchmarks, themore » Oak Ridge National Laboratory Pool Critical Assembly benchmark problem. In addition to the new library, BUGLE-96 and an ENDF/B-VII.0-based coupled 47-neutron, 20-gamma-ray-group cross-section library was generated and used with both SNLRML and IRDF dosimetry cross sections to compute reaction rates. All reaction rates computed by the multigroup libraries are within {+-} 20 % of measurement data and meet the U. S. Nuclear Regulatory Commission acceptance criterion for reactor vessel neutron exposure evaluations specified in Regulatory Guide 1.190. (authors)« less

UV-Vis Ratiometric Resonance Synchronous Spectroscopy for Determination of Nanoparticle and Molecular Optical Cross Sections.

PubMed

Nettles, Charles B; Zhou, Yadong; Zou, Shengli; Zhang, Dongmao

2016-03-01

Demonstrated herein is a UV-vis Ratiometric Resonance Synchronous Spectroscopic (R2S2, pronounced as "R-two-S-two" for simplicity) technique where the R2S2 spectrum is obtained by dividing the resonance synchronous spectrum of a NP-containing solution by the solvent resonance synchronous spectrum. Combined with conventional UV-vis measurements, this R2S2 method enables experimental quantification of the absolute optical cross sections for a wide range of molecular and nanoparticle (NP) materials that range optically from pure photon absorbers or scatterers to simultaneous photon absorbers and scatterers, simultaneous photon absorbers and emitters, and all the way to simultaneous photon absorbers, scatterers, and emitters in the UV-vis wavelength region. Example applications of this R2S2 method were demonstrated for quantifying the Rayleigh scattering cross sections of solvents including water and toluene, absorption and resonance light scattering cross sections for plasmonic gold nanoparticles, and absorption, scattering, and on-resonance fluorescence cross sections for semiconductor quantum dots (Qdots). On-resonance fluorescence quantum yields were quantified for the model molecular fluorophore Eosin Y and fluorescent Qdots CdSe and CdSe/ZnS. The insights and methodology presented in this work should be of broad significance in physical and biological science research that involves photon/matter interactions.

Electron impact ionisation cross sections of iron oxides

NASA Astrophysics Data System (ADS)

Huber, Stefan E.; Mauracher, Andreas; Sukuba, Ivan; Urban, Jan; Maihom, Thana; Probst, Michael

2017-12-01

We report electron impact ionisation cross sections (EICSs) of iron oxide molecules, FexOx and FexOx+1 with x = 1, 2, 3, from the ionisation threshold to 10 keV, obtained with the Deutsch-Märk (DM) and binary-encounter-Bethe (BEB) methods. The maxima of the EICSs range from 3.10 to 9 . 96 × 10-16 cm2 located at 59-72 eV and 5.06 to 14.32 × 10-16 cm2 located at 85-108 eV for the DM and BEB approaches, respectively. The orbital and kinetic energies required for the BEB method are obtained by employing effective core potentials for the inner core electrons in the quantum chemical calculations. The BEB cross sections are 1.4-1.7 times larger than the DM cross sections which can be related to the decreasing population of the Fe 4s orbitals upon addition of oxygen atoms, together with the different methodological foundations of the two methods. Both the DM and BEB cross sections can be fitted excellently to a simple analytical expression used in modelling and simulation codes employed in the framework of nuclear fusion research. Supplementary material in the form of one pdf file available from the Journal web page at http://https://doi.org/10.1140/epjd/e2017-80308-2.

Raman water vapor lidar calibration

NASA Astrophysics Data System (ADS)

Landulfo, E.; Da Costa, R. F.; Torres, A. S.; Lopes, F. J. S.; Whiteman, D. N.; Venable, D. D.

2009-09-01

We show here new results of a Raman LIDAR calibration methodology effort putting emphasis in the assessment of the cross-section ratio between water vapor and nitrogen by the use of a calibrated NIST traceable tungsten lamp. Therein we give a step by step procedure of how to employ such equipment by means of a mapping/scanning procedure over the receiving optics of a water vapor Raman LIDAR. This methodology has been independently used at Howard University Raman LIDAR and at IPEN Raman LIDAR what strongly supports its reproducibility and points towards an independently calibration methodology to be carried on within an experiment routine.

Nuclear data uncertainty propagation by the XSUSA method in the HELIOS2 lattice code

NASA Astrophysics Data System (ADS)

Wemple, Charles; Zwermann, Winfried

2017-09-01

Uncertainty quantification has been extensively applied to nuclear criticality analyses for many years and has recently begun to be applied to depletion calculations. However, regulatory bodies worldwide are trending toward requiring such analyses for reactor fuel cycle calculations, which also requires uncertainty propagation for isotopics and nuclear reaction rates. XSUSA is a proven methodology for cross section uncertainty propagation based on random sampling of the nuclear data according to covariance data in multi-group representation; HELIOS2 is a lattice code widely used for commercial and research reactor fuel cycle calculations. This work describes a technique to automatically propagate the nuclear data uncertainties via the XSUSA approach through fuel lattice calculations in HELIOS2. Application of the XSUSA methodology in HELIOS2 presented some unusual challenges because of the highly-processed multi-group cross section data used in commercial lattice codes. Currently, uncertainties based on the SCALE 6.1 covariance data file are being used, but the implementation can be adapted to other covariance data in multi-group structure. Pin-cell and assembly depletion calculations, based on models described in the UAM-LWR Phase I and II benchmarks, are performed and uncertainties in multiplication factor, reaction rates, isotope concentrations, and delayed-neutron data are calculated. With this extension, it will be possible for HELIOS2 users to propagate nuclear data uncertainties directly from the microscopic cross sections to subsequent core simulations.

A Meta-Analysis of Cognitive Impairment and Decline Associated with Adjuvant Chemotherapy in Women with Breast Cancer

PubMed Central

Ono, Miyuki; Ogilvie, James M.; Wilson, Jennifer S.; Green, Heather J.; Chambers, Suzanne K.; Ownsworth, Tamara; Shum, David H. K.

2015-01-01

A meta-analysis was performed to quantify the magnitude and nature of the association between adjuvant chemotherapy and performance on a range of cognitive domains among breast cancer patients. A total of 27 studies (14 cross-sectional, 8 both cross-sectional and prospective, and 5 prospective) were included in the analyses, involving 1562 breast cancer patients who had undergone adjuvant chemotherapy and 2799 controls that included breast cancer patients who did not receive adjuvant chemotherapy. A total of 737 effect sizes (Cohen’s d) were calculated for cross-sectional and prospective longitudinal studies separately and classified into eight cognitive domains. The mean effect sizes varied across cross-sectional and prospective longitudinal studies (ranging from −1.12 to 0.62 and −0.29 to 1.12, respectively). Each cognitive domain produced small effect sizes for cross-sectional and prospective longitudinal studies (ranging from −0.25 to 0.41). Results from cross-sectional studies indicated a significant association between adjuvant chemotherapy and cognitive impairment that held across studies with varied methodological approaches. For prospective studies, results generally indicated that cognitive functioning improved over time after receiving adjuvant chemotherapy. Greater cognitive impairment was reported in cross-sectional studies comparing chemotherapy groups with healthy control groups. Results suggested that cognitive impairment is present among breast cancer patients irrespective of a history of chemotherapy. Prospective longitudinal research is warranted to examine the degree and persisting nature of cognitive impairment present both before and after chemotherapy, with comparisons made to participants’ cognitive function prior to diagnosis. Accurate understanding of the effects of chemotherapy is essential to enable informed decisions regarding treatment and to improve quality of life among breast cancer patients. PMID:25806355

Assessment under Resource Constraints

ERIC Educational Resources Information Center

Lovett, Steve; Curtis, Mary G.

2015-01-01

Assessment and the measurement of learning are receiving increasing emphasis in American higher education. This is a case study that demonstrates a simple, inexpensive method of measuring freshman to senior "gains" or learning using a cross-sectional methodology. Seniors and freshmen within a four-year business program were both given…

Learning Strategies at Work and Professional Development

ERIC Educational Resources Information Center

Haemer, Hannah Deborah; Borges-Andrade, Jairo Eduardo; Cassiano, Simone Kelli

2017-01-01

Purpose: This paper aims to investigate the prediction of current and evolutionary perceptions of professional development through five learning strategies at work and through training and how individual and job characteristics predict those strategies. Design/methodology/approach: Variables were measured in a cross-sectional survey, with 962…

Professional Identity Development of Counselor Education Doctoral Students: A Qualitative Investigation

ERIC Educational Resources Information Center

Limberg, Dodie; Bell, Hope; Super, John T.; Jacobson, Lamerial; Fox, Jesse; DePue, M. Kristina; Christmas, Chris; Young, Mark E.; Lambie, Glenn W.

2013-01-01

The professional identity of a counselor educator develops primarily during the individual's doctoral preparation program. This study employed consensual qualitative research methodology to examine the phenomenon of professional identity development in counselor education doctoral students (CEDS) in a cohort model. Cross-sectional focus groups…

Students' Entrepreneurial Intentions: An Inter-Regional Comparison

ERIC Educational Resources Information Center

Franco, Mario; Haase, Heiko; Lautenschlager, Arndt

2010-01-01

Purpose: The central research questions which the paper aims to answer are: What are the entrepreneurial intentions of university students in different European regions? What are the factors that most contribute to entrepreneurial intentions and the potential differences between the regions? Design/methodology/approach: This cross-sectional study…

A distorted-wave methodology for electron-ion impact excitation - Calculation for two-electron ions

NASA Technical Reports Server (NTRS)

Bhatia, A. K.; Temkin, A.

1977-01-01

A distorted-wave program is being developed for calculating the excitation of few-electron ions by electron impact. It uses the exchange approximation to represent the exact initial-state wavefunction in the T-matrix expression for the excitation amplitude. The program has been implemented for excitation of the 2/1,3/(S,P) states of two-electron ions. Some of the astrophysical applications of these cross sections as well as the motivation and requirements of the calculational methodology are discussed.

Caffeine Consumption and General Health in Secondary School Children: A Cross-sectional and Longitudinal Analysis

PubMed Central

Richards, Gareth; Smith, Andrew P.

2016-01-01

Although caffeine is sometimes associated with beneficial effects in adults, the substance may be dangerous if intake is too high. This concern is particularly relevant in regards to children and adolescents, as consumption of energy drinks may be particularly high in such populations. For this reason, the current study examined data from the Cornish Academies Project to determine whether caffeine intake in secondary school children was related to responses to a single-item measure of general health. Two cross-sections of data were available: questionnaires were completed by 2030 at baseline, by 2307 at 6-month follow-up, and by 1660 at both time-points. Relationships were, therefore, explored both cross-sectionally and longitudinally. High caffeine consumption (i.e., 1000 mg/week) was associated with low general health in both cross-sections of data, and analyses of individual caffeine sources suggested that the effects related specifically to cola and energy drinks. However, after controlling for additional aspects of diet, demography, and lifestyle, total weekly intake only remained significantly associated with general health at the latter time-point. Further to this, null findings from cross-lag and change-score analyses suggest that caffeine and general health were unlikely to be causally linked in this sample. However, due to methodological limitations, such as the two cross-sections of data being collected only 6 months apart, it is suggested that further longitudinal and intervention studies are required in order for firm conclusions to be drawn. PMID:27965962

Dynamic Effects in the Photoionization of the 6s Subshell of Radon and Nobelium

NASA Astrophysics Data System (ADS)

Keating, David; Manson, Steven; Deshmukh, Pranawa

2017-04-01

Relativistic interactions are very important contributors to atomic properties. Of interest is the alterations made to the wave functions, i.e., the dynamics. These dynamical changes can greatly affect the photoionization cross section of heavy (high Z) atoms. To explore the extent of these dynamic effects a theoretical study of the 6s photoionization cross section of both radon (Z = 86) and nobelium (Z = 102) have been performed using the relativistic random phase approximation (RRPA) methodology. These two cases have been selected because they offer the clearest picture of the effects in question. In order to determine which features in the photoionization cross section are due to relativity, calculations using the (nonrelativistic) random phase approximation with exchange method (RPAE) are performed for comparison. Interchannel coupling can obscure the dynamic effects by ``pulling'' minima out of the discrete spectrum and into the continuum or by inducing minima. Therefore it is necessary to perform calculations without coupling included. This is possible thanks to the RRPA and RPAE codes being able to calculate cross sections with particular channels omitted. Comparisons are presented between calculations with and without interchannel coupling. Work supported by DOE and NSF.

Photoionization of the beryllium isoelectronic sequence: Relativistic and nonrelativistic R-matrix calculations

NASA Astrophysics Data System (ADS)

Chu, Wei-Chun

The photoionization of the beryllium-like isoelectronic series has been studied. The bound state wave functions of the target ions were built with CIV3 program. The relativistic Breit-Pauli R-matrix method was used to calculate the cross sections in the photon energy range between the ionization threshold and 1s24 f7/2 threshold for each ion. For the total cross sections of Be, B+, C+2, N+3, and O +4, our results match experiment well. The comparison between the present work and other theoretical works are also discussed. We show the comparison with our LS results as it indicates the importance of relativistic effects on different ions. In the analysis, the resonances converging to 1 s22lj and 1s 23lj were identified and characterized with quantum defects, energies and widths using the eigenphase sum methodology. We summarize the general appearance of resonances along the resonance series and along the isoelectronic sequence. Partial cross sections are also reported systematically along the sequence. All calculations were performed on the NERSC system. INDEX WORDS: Photoionization, R-matrix, Cross section, Beryllium-like ion, Resonance

Burnout among Accounting and Finance Academics in Ireland

ERIC Educational Resources Information Center

Byrne, Marann; Chughtai, Aamir; Flood, Barbara; Murphy, Evelyn; Willis, Pauline

2013-01-01

Purpose: The purpose of this paper is to assess the levels of burnout experienced by accounting and finance academics in Ireland. Design/methodology/approach: Data for this cross-sectional survey study were collected from 100 accounting and finance academics teaching in Irish third level institutions. Independent sample "t"-tests, one…

Tenure, Functional Track and Strategic Leadership

ERIC Educational Resources Information Center

Eacott, Scott

2010-01-01

Purpose: The purpose of this paper is to investigate whether the demographic variables of tenure and functional track have a moderating effect on the strategic leadership of school leaders. Design/methodology/approach: Using a conceptual framework developed by the researcher, a static/cross-sectional questionnaire-based study on a convenience…

Screen-Related Sedentary Behaviors: Children's and Parents' Attitudes, Motivations, and Practices

ERIC Educational Resources Information Center

He, Meizi; Piche, Leonard; Beynon, Charlene; Harris, Stewart

2010-01-01

Objective: To investigate school-aged children's and parents' attitudes, social influences, and intentions toward excessive screen-related sedentary behavior (S-RSB). Design: A cross-sectional study using a survey methodology. Setting: Elementary schools in London, Ontario, Canada. Participants: All grades 5 and 6 students, their parents, and…

Sociodemographic correlates of cognition in the multi-ethnic study of atherosclerosis (MESA)

USDA-ARS?s Scientific Manuscript database

Our objective was to describe the methodology utilized to evaluate cognitive function in the Multi-Ethnic Study of Atherosclerosis (MESA) and to present preliminary results by age, sex, and race/ethnicity. Cross-sectional measurements of a prospective observational cohort. Residents of 6 U.S. commun...

Knowledge about Sport and Exercise Science

ERIC Educational Resources Information Center

Leal, Acácia Gonçalves Ferreira; Vancini, Rodrigo Luiz; Gentil, Paulo; Benedito-Silva, Ana Amélia; da Silva, Antonio Carlos; Campos, Mário Hebling; Andrade, Marilia Santos; de Lira, Claudio Andre Barbosa

2018-01-01

Purpose: The purpose of this paper was to assess the knowledge on sport and exercise science held by a sample of Brazilian physiotherapists, nutritionists and physical educators. Design/methodology/approach: A cross-sectional research design was used. The answers given by 1,147 professionals (300 physiotherapists, 705 physical educators and 142…

Understanding Barriers to Continence Care in Institutions

ERIC Educational Resources Information Center

Tannenbaum, Cara; Labrecque, Danielle; Lepage, Christiane

2005-01-01

This work seeks to identify factors that facilitate or diminish care-providers' propensity to improve continence care in long-term care (LTC) settings. We conducted a cross-sectional qualitative study using focus group methodology in four long-term care institutions in Montreal, QC. Forty-two nurses, nursing assistants, and orderlies caring for…

Participation in Power Sports and Antisocial Involvement in Preadolescent and Adolescent Boys

ERIC Educational Resources Information Center

Endresen, Inger M.; Olweus, Dan

2005-01-01

Background: A limited number of mostly cross-sectional studies have examined the possible effects of power sports on aggressive and antisocial involvement in children and youth. The majority of these studies have serious methodological limitations, and results are partly contradictory. Longitudinal studies with representative, reasonably large…

Knowledge Strategies for Enhancing School Learning Capacity

ERIC Educational Resources Information Center

Cheng, Eric

2012-01-01

Purpose: The purpose of this paper is to identify the knowledge strategies applied in aided secondary schools in Hong Kong and to explore the predictive relationship between knowledge strategies and school learning capacity. Design/methodology/approach: A cross-sectional quantitative survey was designed to collect data from 427 teachers at 15…

Supervisor Behaviours that Facilitate Training Transfer

ERIC Educational Resources Information Center

Lancaster, Sue; Di Milia, Lee; Cameron, Roslyn

2013-01-01

Purpose: The purpose of this paper is to describe the supervisor behaviours that employees found to be helpful and unhelpful in facilitating training transfer. The study aims to provide rich qualitative data from the employee's perspective. Design/methodology/approach: This study utilises a cross-sectional design. A case study and a qualitative…

Cross-section Trichometry: A Clinical Tool for Assessing the Progression and Treatment Response of Alopecia

PubMed Central

Wikramanayake, Tongyu Cao; Mauro, Lucia M; Tabas, Irene A; Chen, Anne L; Llanes, Isabel C; Jimenez, Joaquin J

2012-01-01

Background: To properly assess the progression and treatment response of alopecia, one must measure the changes in hair mass, which is influenced by both the density and diameter of hair. Unfortunately, a convenient device for hair mass evaluation had not been available to dermatologists until the recent introduction of the cross-section trichometer, which directly measures the cross-sectional area of an isolated bundle of hair. Objective: We sought to evaluate the accuracy and sensitivity of the HairCheck® device, a commercial product derived from the original cross-section trichometer. Materials and Methods: Bundles of surgical silk and human hair were used to evaluate the ability of the HairCheck® device to detect and measure small changes in the number and diameter of strands, and bundle weight. Results: Strong correlations were observed between the bundle's cross-sectional area, displayed as the numeric Hair Mass Index (HMI), the number of strands, the silk/hair diameter, and the bundle dry weight. Conclusion: HMI strongly correlated with the number and diameter of silk/hair, and the weight of the bundle, suggesting that it can serve as a valid indicator of hair mass. We have given the name cross-section trichometry (CST) to the methodology of obtaining the HMI using the HairCheck® system. CST is a simple modality for the quantification of hair mass, and may be used as a convenient and useful tool to clinically assess changes in hair mass caused by thinning, shedding, breakage, or growth in males and females with progressive alopecia or those receiving alopecia treatment. PMID:23766610

Cross-Sectional And Longitudinal Uncertainty Propagation In Drinking Water Risk Assessment

NASA Astrophysics Data System (ADS)

Tesfamichael, A. A.; Jagath, K. J.

2004-12-01

Pesticide residues in drinking water can vary significantly from day to day. However, drinking water quality monitoring performed under the Safe Drinking Water Act (SDWA) at most community water systems (CWSs) is typically limited to four data points per year over a few years. Due to limited sampling, likely maximum residues may be underestimated in risk assessment. In this work, a statistical methodology is proposed to study the cross-sectional and longitudinal uncertainties in observed samples and their propagated effect in risk estimates. The methodology will be demonstrated using data from 16 CWSs across the US that have three independent databases of atrazine residue to estimate the uncertainty of risk in infants and children. The results showed that in 85% of the CWSs, chronic risks predicted with the proposed approach may be two- to four-folds higher than that predicted with the current approach, while intermediate risks may be two- to three-folds higher in 50% of the CWSs. In 12% of the CWSs, however, the proposed methodology showed a lower intermediate risk. A closed-form solution of propagated uncertainty will be developed to calculate the number of years (seasons) of water quality data and sampling frequency needed to reduce the uncertainty in risk estimates. In general, this methodology provided good insight into the importance of addressing uncertainty of observed water quality data and the need to predict likely maximum residues in risk assessment by considering propagation of uncertainties.

A General 3-D Methodology for Quasi-Static Simulation of Drainage and Imbibition: Application to Highly Porous Fibrous Materials

NASA Astrophysics Data System (ADS)

Riasi, S.; Huang, G.; Montemagno, C.; Yeghiazarian, L.

2013-12-01

Micro-scale modeling of multiphase flow in porous media is critical to characterize porous materials. Several modeling techniques have been implemented to date, but none can be used as a general strategy for all porous media applications due to challenges presented by non-smooth high-curvature solid surfaces, and by a wide range of pore sizes and porosities. Finite approaches like the finite volume method require a high quality, problem-dependent mesh, while particle-based approaches like the lattice Boltzmann require too many particles to achieve a stable meaningful solution. Both come at a large computational cost. Other methods such as pore network modeling (PNM) have been developed to accelerate the solution process by simplifying the solution domain, but so far a unique and straightforward methodology to implement PNM is lacking. We have developed a general, stable and fast methodology to model multi-phase fluid flow in porous materials, irrespective of their porosity and solid phase topology. We have applied this methodology to highly porous fibrous materials in which void spaces are not distinctly separated, and where simplifying the geometry into a network of pore bodies and throats, as in PNM, does not result in a topology-consistent network. To this end, we have reduced the complexity of the 3-D void space geometry by working with its medial surface. We have used a non-iterative fast medial surface finder algorithm to determine a voxel-wide medial surface of the void space, and then solved the quasi-static drainage and imbibition on the resulting domain. The medial surface accurately represents the topology of the porous structure including corners, irregular cross sections, etc. This methodology is capable of capturing corner menisci and the snap-off mechanism numerically. It also allows for calculation of pore size distribution, permeability and capillary pressure-saturation-specific interfacial area surface of the porous structure. To show the capability of this method to numerically estimate the capillary pressure in irregular cross sections, we compared our results with analytical solutions available for capillary tubes with non-circular cross sections. We also validated this approach by implementing it on well-known benchmark problems such as a bundle of cylinders and packed spheres.

Computation of discharge using the index-velocity method in tidally affected areas

USGS Publications Warehouse

Ruhl, Catherine A.; Simpson, Michael R.

2005-01-01

Computation of a discharge time-series in a tidally affected area is a two-step process. First, the cross-sectional area is computed on the basis of measured water levels and the mean cross-sectional velocity is computed on the basis of the measured index velocity. Then discharge is calculated as the product of the area and mean velocity. Daily mean discharge is computed as the daily average of the low-pass filtered discharge. The Sacramento-San Joaquin River Delta and San Francisco Bay, California, is an area that is strongly influenced by the tides, and therefore is used as an example of how this methodology is used.

Review of indirect detection of dark matter with neutrinos

NASA Astrophysics Data System (ADS)

Danninger, Matthias

2017-09-01

Dark Matter could be detected indirectly through the observation of neutrinos produced in dark matter self-annihilations or decays. Searches for such neutrino signals have resulted in stringent constraints on the dark matter self-annihilation cross section and the scattering cross section with matter. In recent years these searches have made significant progress in sensitivity through new search methodologies, new detection channels, and through the availability of rich datasets from neutrino telescopes and detectors, like IceCube, ANTARES, Super-Kamiokande, etc. We review recent experimental results and put them in context with respect to other direct and indirect dark matter searches. We also discuss prospects for discoveries at current and next generation neutrino detectors.

Convergent close coupling versus the generalized Sturmian function approach: Wave-function analysis

NASA Astrophysics Data System (ADS)

Ambrosio, M.; Mitnik, D. M.; Gasaneo, G.; Randazzo, J. M.; Kadyrov, A. S.; Fursa, D. V.; Bray, I.

2015-11-01

We compare the physical information contained in the Temkin-Poet (TP) scattering wave function representing electron-impact ionization of hydrogen, calculated by the convergent close-coupling (CCC) and generalized Sturmian function (GSF) methodologies. The idea is to show that the ionization cross section can be extracted from the wave functions themselves. Using two different procedures based on hyperspherical Sturmian functions we show that the transition amplitudes contained in both GSF and CCC scattering functions lead to similar single-differential cross sections. The single-continuum channels were also a subject of the present studies, and we show that the elastic and excitation amplitudes are essentially the same as well.

CCKT Calculation of e-H Total Cross Sections

NASA Technical Reports Server (NTRS)

Bhatia, Aaron K.; Schneider, B. I.; Temkin, A.; Fisher, Richard R. (Technical Monitor)

2002-01-01

We are in the process of carrying out calculations of e-H total cross sections using the 'complex-correlation Kohn-T' (CCKT) method. In a later paper, we described the methodology more completely, but confined calculations to the elastic scattering region, with definitive, precision results for S-wave phase shifts. Here we extend the calculations to the (low) continuum (1 much less than k(exp 2) much less than 3) using a Green's function formulation. This avoids having to solve integro-differential equations; rather we evaluate indefinite integrals involving appropriate Green's functions and the (complex) optical potential to find the scattering function u(r). From the asymptotic form of u(r) we extract a T(sub L) which is a complex number. From T(sub L), elastic sigma(sub L)(elastic) = 4pi(2L+1)((absolute value of T(sub L))(exp 2)), and total sigma (sub L)(total) = 4pi/k(2L+1)Im(T(sub L)) cross sections follow.

Flexural-torsional vibration of simply supported open cross-section steel beams under moving loads

NASA Astrophysics Data System (ADS)

Michaltsos, G. T.; Sarantithou, E.; Sophianopoulos, D. S.

2005-02-01

SummaryThe present work deals with linearized modal analysis of the combined flexural-torsional vibration of simply supported steel beams with open monosymmetric cross-sections, acted upon by a load of constant magnitude, traversing its span eccentrically with constant velocity. After thoroughly investigating the free vibrations of the structure, which simulates a commonly used highway bridge, its forced motions under the aforementioned loading type are investigated. Utilizing the capabilities of symbolic computations within modern mathematical software, the effect of the most significant geometrical and cross-sectional beam properties on the free vibration characteristics of the beam are established and presented in tabular and graphical form. Moreover, adopting realistic values of the simplified vehicle model adopted, the effects of eccentricity, load magnitude and corresponding velocity are assessed and interesting conclusions for structural design purposes are drawn. The proposed methodology may serve as a starting point for further in-depth study of the whole scientific subject, in which sophisticated vehicle models, energy dissipation and more complicated bridge models may be used.

Field Quality and Fabrication Analysis of HQ02 Reconstructed Nb3Sn Coil Cross Sections

DOE Office of Scientific and Technical Information (OSTI.GOV)

Holik, Eddie Frank; Ambrosio, Giorgio; Carbonara, Andrea

2017-01-23

The US LHC Accelerator Research Program (LARP) quadrupole HQ02 was designed and fully tested as part of the low-beta quad development for Hi-Lumi LHC. HQ02’s design is well documented with full fabrication accounting along with full field analysis at low and high current. With this history, HQ02 is an excellent test bed for developing a methodology for measuring turn locations from magnet cross sections and comparing with CAD models and measured field. All 4 coils of HQ02 were cut in identical locations along the magnetic length corresponding to magnetic field measurement and coil metrology. A real-time camera and coordinate measuringmore » equipment was used to plot turn corners. Measurements include systematic and random displacements of winding blocks and individual turns along the magnetic length. The range of cable shifts and the field harmonic range along the length are in agreement, although correlating turn locations and measured harmonics in each cross section is challenging.« less

Assessing Conifer Ray Parenchyma for Ecological Studies: Pitfalls and Guidelines.

PubMed

von Arx, Georg; Arzac, Alberto; Olano, José M; Fonti, Patrick

2015-01-01

Ray parenchyma is an essential tissue for tree functioning and survival. This living tissue plays a major role for storage and transport of water, nutrients, and non-structural carbohydrates (NSC), thus regulating xylem hydraulics and growth. However, despite the importance of rays for tree carbon and water relations, methodological challenges hamper knowledge about ray intra- and inter-tree variability and its ecological meaning. In this study we provide a methodological toolbox for soundly quantifying spatial and temporal variability of different ray features. Anatomical ray features were surveyed in different cutting planes (cross-sectional, tangential, and radial) using quantitative image analysis on stem-wood micro-sections sampled from 41 mature Scots pines (Pinus sylvestris). The percentage of ray surface (PERPAR), a proxy for ray volume, was compared among cutting planes and between early- and latewood to assess measurement-induced variability. Different tangential ray metrics were correlated to assess their similarities. The accuracy of cross-sectional and tangential measurements for PERPAR estimates as a function of number of samples and the measured wood surface was assessed using bootstrapping statistical technique. Tangential sections offered the best 3D insight of ray integration into the xylem and provided the most accurate estimates of PERPAR, with 10 samples of 4 mm(2) showing an estimate within ±6.0% of the true mean PERPAR (relative 95% confidence interval, CI95), and 20 samples of 4 mm(2) showing a CI95 of ±4.3%. Cross-sections were most efficient for establishment of time series, and facilitated comparisons with other widely used xylem anatomical features. Earlywood had significantly lower PERPAR (5.77 vs. 6.18%) and marginally fewer initiating rays than latewood. In comparison to tangential sections, PERPAR was systematically overestimated (6.50 vs. 4.92%) and required approximately twice the sample area for similar accuracy. Radial cuttings provided the least accurate PERPAR estimates. This evaluation of ray parenchyma in conifers and the presented guidelines regarding data accuracy as a function of measured wood surface and number of samples represent an important methodological reference for ray quantification, which will ultimately improve the understanding of the fundamental role of ray parenchyma tissue for the performance and survival of trees growing in stressed environments.

Assessing Conifer Ray Parenchyma for Ecological Studies: Pitfalls and Guidelines

PubMed Central

von Arx, Georg; Arzac, Alberto; Olano, José M.; Fonti, Patrick

2015-01-01

Ray parenchyma is an essential tissue for tree functioning and survival. This living tissue plays a major role for storage and transport of water, nutrients, and non-structural carbohydrates (NSC), thus regulating xylem hydraulics and growth. However, despite the importance of rays for tree carbon and water relations, methodological challenges hamper knowledge about ray intra- and inter-tree variability and its ecological meaning. In this study we provide a methodological toolbox for soundly quantifying spatial and temporal variability of different ray features. Anatomical ray features were surveyed in different cutting planes (cross-sectional, tangential, and radial) using quantitative image analysis on stem-wood micro-sections sampled from 41 mature Scots pines (Pinus sylvestris). The percentage of ray surface (PERPAR), a proxy for ray volume, was compared among cutting planes and between early- and latewood to assess measurement-induced variability. Different tangential ray metrics were correlated to assess their similarities. The accuracy of cross-sectional and tangential measurements for PERPAR estimates as a function of number of samples and the measured wood surface was assessed using bootstrapping statistical technique. Tangential sections offered the best 3D insight of ray integration into the xylem and provided the most accurate estimates of PERPAR, with 10 samples of 4 mm2 showing an estimate within ±6.0% of the true mean PERPAR (relative 95% confidence interval, CI95), and 20 samples of 4 mm2 showing a CI95 of ±4.3%. Cross-sections were most efficient for establishment of time series, and facilitated comparisons with other widely used xylem anatomical features. Earlywood had significantly lower PERPAR (5.77 vs. 6.18%) and marginally fewer initiating rays than latewood. In comparison to tangential sections, PERPAR was systematically overestimated (6.50 vs. 4.92%) and required approximately twice the sample area for similar accuracy. Radial cuttings provided the least accurate PERPAR estimates. This evaluation of ray parenchyma in conifers and the presented guidelines regarding data accuracy as a function of measured wood surface and number of samples represent an important methodological reference for ray quantification, which will ultimately improve the understanding of the fundamental role of ray parenchyma tissue for the performance and survival of trees growing in stressed environments. PMID:26635842

Stakeout surveys for check dams in gullied areas by using the FreeXSap photogrammetric method

NASA Astrophysics Data System (ADS)

Castillo, Carlos; Marín-Moreno, Víctor; Taguas, Encarnación V.

2017-04-01

Prior to any check dam construction work, it is necessary to carry out field stakeout surveys to define the layout of the dam series according to spacing criteria. While in expensive and complex settings, accurate measurement techniques might be justified (e.g. differential GPS), for small to medium-sized check dams typical of areas affected by gully erosion, simpler methodologies might be more cost-efficient. Innovative 3D photogrammetric techniques based on Structure-from-Motion (SfM) algorithms have proved to be useful across different geomorphological applications and have been successfully applied for gully assessment. In this communication, we present an efficient methodology consisting of the application of a free interface for photogrammetric reconstruction (FreeXSap) combined with simple distance measurements to obtain channel cross-sections determining the width and height of the check dam for a particular cross-section. We will illustrate its use for a hundred-meter-long gully under conventional agriculture in Córdoba (Spain). FreeXSap is an easy-to-use graphical user interface written in Matlab Code (Mathworks, 2016) for the reconstruction of 3D models from image sets taken with digital consumer-grade cameras. The SfM algorithms are based on MicMac scripts (Pierrot-Deseilligny and Cléry, 2011) along with routines specifically developed for the orientation, determination and geometrical analysis of cross-sections. It only requires the collection of a few pictures of a channel cross-section (normally below 5) by the camera operator to build an accurate 3D model, while a second operator holds a pole in vertical position (with the help of a bubble level attached to the pole) in order to provide orientation and scale for further processing. The spacing between check dams was determined using the head-to-toe rule by using a clinometer App on a Smartphone. In this work we will evaluate the results of the application of this methodology in terms of time and cost requirements and the capabilities and operation procedure of FreeXSap will be presented. This tool will be available for free download. REFERENCES Pierrot-Deseilligny, M and Cléry, I. APERO, an Open Source Bundle Adjusment Software for Automatic Calibration and Orientation of a Set of Images. Proceedings of the ISPRS Commission V Symposium, Image Engineering and Vision Metrology, Trento, Italy, 2-4 March 2011.

Undertaking Experiments in Social Sciences: Sequential, Multiple Time Series Designs for Consideration

ERIC Educational Resources Information Center

Phan, Huy P.; Ngu, Bing H.

2017-01-01

In social sciences, the use of stringent methodological approaches is gaining increasing emphasis. Researchers have recognized the limitations of cross-sectional, non-manipulative data in the study of causality. True experimental designs, in contrast, are preferred as they represent rigorous standards for achieving causal flows between variables.…

Adolescent-Friendly Technologies as Potential Adjuncts for Health Promotion

ERIC Educational Resources Information Center

Dietrich, Janan J.; Coetzee, Jenny; Otwombe, Kennedy; Hornschuh, Stefanie; Mdanda, Sanele; Nkala, Busisiwe; Makongoza, Matamela; Tshabalala, Celokhuhle; Soon, Christine N.; Kaida, Angela; Hogg, Robert; Gray, Glenda E.; Miller, Cari L.

2014-01-01

Purpose: The purpose of this paper is to measure prevalence and predictors of mobile phone access and use among adolescents in Soweto, South Africa. Design/Methodology/Approach: The current study was an interviewer-administered, cross-sectional survey among adolescents 14-19 years living in a hyper-endemic human immunodeficiency virus (HIV)…

The Appropriateness of the Concept Mastery Test for Graduate Students.

ERIC Educational Resources Information Center

Goolsby, Thomas M., Jr.

A study was conducted to determine the appropriateness of the Concept Mastery Test for graduate students enrolled in an introductory research methodology course. Ss represented a cross-section of students entering a master's program at a large southeastern university. The Concept Mastery Test (CMT), the Nelson-Denny Reading Test (ND), and the…

Linking Teacher Competences to Organizational Citizenship Behaviour: The Role of Empowerment

ERIC Educational Resources Information Center

Kasekende, Francis; Munene, John C.; Otengei, Samson Omuudu; Ntayi, Joseph Mpeera

2016-01-01

Purpose: The purpose of this paper is to examine relationship between teacher competences and organizational citizenship behavior (OCB) with empowerment as a mediating factor. Design/methodology/approach: The study took a cross-sectional descriptive and analytical design. Using cluster and random sampling procedures, data were obtained from 383…

Physical Education in Primary Schools: Classroom Teachers' Perceptions of Benefits and Outcomes

ERIC Educational Resources Information Center

Morgan, Philip J.; Hansen, Vibeke

2008-01-01

Objective: The aim of the current study was to examine the perceptions of classroom teachers regarding the benefits and outcomes of their PE programs. Design: Cross-sectional. Setting: Thirty eight randomly selected primary schools in New South Wales (NSW), Australia. Method: A mixed-mode methodology was utilized, incorporating semi-structured…

Health Science Students' Perception about Research Training Programs Offered in Saudi Universities

ERIC Educational Resources Information Center

Al Kuwaiti, Ahmed; Subbarayalu, Arun Vijay

2015-01-01

Purpose: The purpose of this paper was to examine the perceptions of students of health sciences on research training programs offered at Saudi universities. Design/methodology/approach: A cross-sectional survey design was adopted to capture the perceptions of health science students about research training programs offered at selected Saudi…

School Openness, Parent Participation and Satisfaction: An Exploration of Causal Models.

ERIC Educational Resources Information Center

Spivak, Harriet

This case study in policy research was prompted by: (1) concern about a methodological issue: how useful are cross-sectional, non-experimental data for answering policy questions?--and, (2) interest in some policy issues raised by the school decentralization/community control controversies and participatory reforms of the 1960s--are participatory…

Thinking Like a 21st Century Nurse: Theories, Instruments and Methodologies to Improve Clinical Thinking

ERIC Educational Resources Information Center

Fountain, Lily

2011-01-01

This cross-sectional descriptive study of the Model of Domain Learning, which describes learners' progress from acclimation through competence to proficiency through the interplay of knowledge, interest and strategic processing/critical thinking (CT), examined its extension to maternity nursing. Based on the identified need for valid, reliable…

Students' Perceived Impact of Learning and Satisfaction with Blogs

ERIC Educational Resources Information Center

Ifinedo, Princely

2017-01-01

Purpose: Students' use of blogging tools in learning environments is increasing across the world. The purpose of this paper is to contribute to the literature by examining the effects of relevant factors that engender satisfaction and positive impacts of the technology for learning. Design/methodology/approach A cross-sectional survey was used to…

Understanding Gender, Creativity, and Entrepreneurial Intentions

ERIC Educational Resources Information Center

Smith, Ronda Marie; Sardeshmukh, Shruti R.; Combs, Gwendolyn M.

2016-01-01

Purpose: The purpose of this paper is to explore the complex relationships between gender and entrepreneurial intentions. Design/methodology/approach: This paper uses a two study design where the second study is a constructive replication of the first study. The first study uses a cross-sectional design, while the second uses a design where data…

Factors Associated with Job Content Plateauing among Older Workers

ERIC Educational Resources Information Center

Armstrong-Stassen, Marjorie

2008-01-01

Purpose: The purpose of this paper is to identify personal and work environment factors associated with the experience of job content plateauing among older workers. Design/methodology/approach: Two cross-sectional studies, each including two samples, were conducted. In each study, one sample consisted of a diverse group of older workers and the…

Foundational Competencies for Enhancing Work Engagement in SMEs Malaysia

ERIC Educational Resources Information Center

Haruna, Aliyu Yelwa; Marthandan, Govindan

2017-01-01

Purpose: This study aims to examine the impact of foundational competencies on work engagement in the context of the Malaysian small and medium enterprises (SMEs) service sector. Design/Methodology/Approach: This is a cross-sectional study conducted in Malaysia, and data were gathered via a survey on 312 employees representing SMEs service…

Monte Carol-based validation of neutronic methodology for EBR-II analyses

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liaw, J.R.; Finck, P.J.

1993-01-01

The continuous-energy Monte Carlo code VIM (Ref. 1) has been validated extensively over the years against fast critical experiments and other neutronic analysis codes. A high degree of confidence in VIM for predicting reactor physics parameters has been firmly established. This paper presents a numerical validation of two conventional multigroup neutronic analysis codes, DIF3D (Ref. 4) and VARIANT (Ref. 5), against VIM for two Experimental Breeder Reactor II (EBR-II) core loadings in detailed three-dimensional hexagonal-z geometry. The DIF3D code is based on nodal diffusion theory, and it is used in calculations for day-today reactor operations, whereas the VARIANT code ismore » based on nodal transport theory and is used with increasing frequency for specific applications. Both DIF3D and VARIANT rely on multigroup cross sections generated from ENDF/B-V by the ETOE-2/MC[sup 2]-II/SDX (Ref. 6) code package. Hence, this study also validates the multigroup cross-section processing methodology against the continuous-energy approach used in VIM.« less

A Cross-Sectional Investigation of the Effects of Regional Labor Market Conditions on the Reenlistment Decisions of Air Force Enlistees

DTIC Science & Technology

1991-09-01

Baldwin, Robert H. and Thomas V. Daula. "Army Recruit Attrition and Force Manning Costs: Methodology and Analysis," Research in Labor Economics , ed. Ronald...Methodological Issues and a Proposed Specification," Research in Labor Economics , ed. Ronald Ehrenberg, 7:339-363 (1985b). Baldwin, Robert H. et al. "Military...Manpower Research: An Introduction," Research in Labor Economics , ed. Ronald Ehrenberg, L:257-260 (1985). Dalton, Dan R. et al. "Turnover Overstated: The

Processing and validation of JEFF-3.1.1 and ENDF/B-VII.0 group-wise cross section libraries for shielding calculations

NASA Astrophysics Data System (ADS)

Pescarini, M.; Sinitsa, V.; Orsi, R.; Frisoni, M.

2013-03-01

This paper presents a synthesis of the ENEA-Bologna Nuclear Data Group programme dedicated to generate and validate group-wise cross section libraries for shielding and radiation damage deterministic calculations in nuclear fission reactors, following the data processing methodology recommended in the ANSI/ANS-6.1.2-1999 (R2009) American Standard. The VITJEFF311.BOLIB and VITENDF70.BOLIB finegroup coupled n-γ (199 n + 42 γ - VITAMIN-B6 structure) multi-purpose cross section libraries, based on the Bondarenko method for neutron resonance self-shielding and respectively on JEFF-3.1.1 and ENDF/B-VII.0 evaluated nuclear data, were produced in AMPX format using the NJOY-99.259 and the ENEA-Bologna 2007 Revision of the SCAMPI nuclear data processing systems. Two derived broad-group coupled n-γ (47 n + 20 γ - BUGLE-96 structure) working cross section libraries in FIDO-ANISN format for LWR shielding and pressure vessel dosimetry calculations, named BUGJEFF311.BOLIB and BUGENDF70.BOLIB, were generated by the revised version of SCAMPI, through problem-dependent cross section collapsing and self-shielding from the cited fine-group libraries. The validation results on the criticality safety benchmark experiments for the fine-group libraries and the preliminary validation results for the broad-group working libraries on the PCA-Replica and VENUS-3 engineering neutron shielding benchmark experiments are reported in synthesis.

The electron-furfural scattering dynamics for 63 energetically open electronic states

NASA Astrophysics Data System (ADS)

da Costa, Romarly F.; do N. Varella, Márcio T.; Bettega, Márcio H. F.; Neves, Rafael F. C.; Lopes, Maria Cristina A.; Blanco, Francisco; García, Gustavo; Jones, Darryl B.; Brunger, Michael J.; Lima, Marco A. P.

2016-03-01

We report on integral-, momentum transfer- and differential cross sections for elastic and electronically inelastic electron collisions with furfural (C5H4O2). The calculations were performed with two different theoretical methodologies, the Schwinger multichannel method with pseudopotentials (SMCPP) and the independent atom method with screening corrected additivity rule (IAM-SCAR) that now incorporates a further interference (I) term. The SMCPP with N energetically open electronic states (Nopen) at either the static-exchange (Nopen ch-SE) or the static-exchange-plus-polarisation (Nopen ch-SEP) approximation was employed to calculate the scattering amplitudes at impact energies lying between 5 eV and 50 eV, using a channel coupling scheme that ranges from the 1ch-SEP up to the 63ch-SE level of approximation depending on the energy considered. For elastic scattering, we found very good overall agreement at higher energies among our SMCPP cross sections, our IAM-SCAR+I cross sections and the experimental data for furan (a molecule that differs from furfural only by the substitution of a hydrogen atom in furan with an aldehyde functional group). This is a good indication that our elastic cross sections are converged with respect to the multichannel coupling effect for most of the investigated intermediate energies. However, although the present application represents the most sophisticated calculation performed with the SMCPP method thus far, the inelastic cross sections, even for the low lying energy states, are still not completely converged for intermediate and higher energies. We discuss possible reasons leading to this discrepancy and point out what further steps need to be undertaken in order to improve the agreement between the calculated and measured cross sections.

The electron-furfural scattering dynamics for 63 energetically open electronic states

DOE Office of Scientific and Technical Information (OSTI.GOV)

Costa, Romarly F. da; Centro de Ciências Naturais e Humanas, Universidade Federal do ABC, Santo André, São Paulo 09210-580; Varella, Márcio T. do N

We report on integral-, momentum transfer- and differential cross sections for elastic and electronically inelastic electron collisions with furfural (C{sub 5}H{sub 4}O{sub 2}). The calculations were performed with two different theoretical methodologies, the Schwinger multichannel method with pseudopotentials (SMCPP) and the independent atom method with screening corrected additivity rule (IAM-SCAR) that now incorporates a further interference (I) term. The SMCPP with N energetically open electronic states (N{sub open}) at either the static-exchange (N{sub open} ch-SE) or the static-exchange-plus-polarisation (N{sub open} ch-SEP) approximation was employed to calculate the scattering amplitudes at impact energies lying between 5 eV and 50 eV, using a channelmore » coupling scheme that ranges from the 1ch-SEP up to the 63ch-SE level of approximation depending on the energy considered. For elastic scattering, we found very good overall agreement at higher energies among our SMCPP cross sections, our IAM-SCAR+I cross sections and the experimental data for furan (a molecule that differs from furfural only by the substitution of a hydrogen atom in furan with an aldehyde functional group). This is a good indication that our elastic cross sections are converged with respect to the multichannel coupling effect for most of the investigated intermediate energies. However, although the present application represents the most sophisticated calculation performed with the SMCPP method thus far, the inelastic cross sections, even for the low lying energy states, are still not completely converged for intermediate and higher energies. We discuss possible reasons leading to this discrepancy and point out what further steps need to be undertaken in order to improve the agreement between the calculated and measured cross sections.« less

Cross-cultural validation of instruments measuring health beliefs about colorectal cancer screening among Korean Americans.

PubMed

Lee, Shin-Young; Lee, Eunice E

2015-02-01

The purpose of this study was to report the instrument modification and validation processes to make existing health belief model scales culturally appropriate for Korean Americans (KAs) regarding colorectal cancer (CRC) screening utilization. Instrument translation, individual interviews using cognitive interviewing, and expert reviews were conducted during the instrument modification phase, and a pilot test and a cross-sectional survey were conducted during the instrument validation phase. Data analyses of the cross-sectional survey included internal consistency and construct validity using exploratory and confirmatory factor analysis. The main issues identified during the instrument modification phase were (a) cultural and linguistic translation issues and (b) newly developed items reflecting Korean cultural barriers. Cross-sectional survey analyses during the instrument validation phase revealed that all scales demonstrate good internal consistency reliability (Cronbach's alpha=.72~.88). Exploratory factor analysis showed that susceptibility and severity loaded on the same factor, which may indicate a threat variable. Items with low factor loadings in the confirmatory factor analysis may relate to (a) lack of knowledge about fecal occult blood testing and (b) multiple dimensions of the subscales. Methodological, sequential processes of instrument modification and validation, including translation, individual interviews, expert reviews, pilot testing and a cross-sectional survey, were provided in this study. The findings indicate that existing instruments need to be examined for CRC screening research involving KAs.

Assessment of optimum threshold and particle shape parameter for the image analysis of aggregate size distribution of concrete sections

NASA Astrophysics Data System (ADS)

Ozen, Murat; Guler, Murat

2014-02-01

Aggregate gradation is one of the key design parameters affecting the workability and strength properties of concrete mixtures. Estimating aggregate gradation from hardened concrete samples can offer valuable insights into the quality of mixtures in terms of the degree of segregation and the amount of deviation from the specified gradation limits. In this study, a methodology is introduced to determine the particle size distribution of aggregates from 2D cross sectional images of concrete samples. The samples used in the study were fabricated from six mix designs by varying the aggregate gradation, aggregate source and maximum aggregate size with five replicates of each design combination. Each sample was cut into three pieces using a diamond saw and then scanned to obtain the cross sectional images using a desktop flatbed scanner. An algorithm is proposed to determine the optimum threshold for the image analysis of the cross sections. A procedure was also suggested to determine a suitable particle shape parameter to be used in the analysis of aggregate size distribution within each cross section. Results of analyses indicated that the optimum threshold hence the pixel distribution functions may be different even for the cross sections of an identical concrete sample. Besides, the maximum ferret diameter is the most suitable shape parameter to estimate the size distribution of aggregates when computed based on the diagonal sieve opening. The outcome of this study can be of practical value for the practitioners to evaluate concrete in terms of the degree of segregation and the bounds of mixture's gradation achieved during manufacturing.

Cross-sectional mapping for refined beam elements with applications to shell-like structures

NASA Astrophysics Data System (ADS)

Pagani, A.; de Miguel, A. G.; Carrera, E.

2017-06-01

This paper discusses the use of higher-order mapping functions for enhancing the physical representation of refined beam theories. Based on the Carrera unified formulation (CUF), advanced one-dimensional models are formulated by expressing the displacement field as a generic expansion of the generalized unknowns. According to CUF, a novel physically/geometrically consistent model is devised by employing Legendre-like polynomial sets to approximate the generalized unknowns at the cross-sectional level, whereas a local mapping technique based on the blending functions method is used to describe the exact physical boundaries of the cross-section domain. Classical and innovative finite element methods, including hierarchical p-elements and locking-free integration schemes, are utilized to solve the governing equations of the unified beam theory. Several numerical applications accounting for small displacements/rotations and strains are discussed, including beam structures with cross-sectional curved edges, cylindrical shells, and thin-walled aeronautical wing structures with reinforcements. The results from the proposed methodology are widely assessed by comparisons with solutions from the literature and commercial finite element software tools. The attention is focussed on the high computational efficiency and the marked capabilities of the present beam model, which can deal with a broad spectrum of structural problems with unveiled accuracy in terms of geometrical representation of the domain boundaries.

The Mediterranean diet and age-related cognitive functioning: A systematic review of study findings and neuropsychological assessment methodology.

PubMed

Knight, Alissa; Bryan, Janet; Murphy, Karen

2017-10-01

The primary aims of this review were to identify studies investigating the association between the MedDiet pattern and age-related cognitive function, to determine the current status of knowledge, and to ascertain whether a lack of standardization with the operationalization of age-related cognitive function and differences in the chosen neuropsychological assessment methodology impacted on the results and findings. The systematic review protocol for this paper was carried out following the statement and general principles of PRISMA and the UK Centre for Reviews and Dissemination (CRD). A systematic search of electronic databases yielded two cross-sectional studies, two cross-sectional/prospective studies, and 11 prospective studies for inclusion. Among this group of studies, conflicting results and conclusions regarding the efficacy of the MedDiet as a therapeutic approach for age-related cognitive function were found. Of importance, clear differences among studies in relation to neuropsychological assessment methodology were identified. Such disparity appeared to be one plausible factor contributing to the lack of consensus among study findings. One of the important challenges for future research will be to aim toward some kind of standardized neuropsychological assessment criteria. This type of endeavor will enable the ability to validate with greater confidence, whether or not adherence to a MedDiet does promote benefit for age-related cognitive function.

Methodology for the Design of Streamline-Traced External-Compression Supersonic Inlets

NASA Technical Reports Server (NTRS)

Slater, John W.

2014-01-01

A design methodology based on streamline-tracing is discussed for the design of external-compression, supersonic inlets for flight below Mach 2.0. The methodology establishes a supersonic compression surface and capture cross-section by tracing streamlines through an axisymmetric Busemann flowfield. The compression system of shock and Mach waves is altered through modifications to the leading edge and shoulder of the compression surface. An external terminal shock is established to create subsonic flow which is diffused in the subsonic diffuser. The design methodology was implemented into the SUPIN inlet design tool. SUPIN uses specified design factors to design the inlets and computes the inlet performance, which includes the flow rates, total pressure recovery, and wave drag. A design study was conducted using SUPIN and the Wind-US computational fluid dynamics code to design and analyze the properties of two streamline-traced, external-compression (STEX) supersonic inlets for Mach 1.6 freestream conditions. The STEX inlets were compared to axisymmetric pitot, two-dimensional, and axisymmetric spike inlets. The STEX inlets had slightly lower total pressure recovery and higher levels of total pressure distortion than the axisymmetric spike inlet. The cowl wave drag coefficients of the STEX inlets were 20% of those for the axisymmetric spike inlet. The STEX inlets had external sound pressures that were 37% of those of the axisymmetric spike inlet, which may result in lower adverse sonic boom characteristics. The flexibility of the shape of the capture cross-section may result in benefits for the integration of STEX inlets with aircraft.

Applying the Pseudo-Panel Approach to International Large-Scale Assessments: A Methodology for Analyzing Subpopulation Trend Data

ERIC Educational Resources Information Center

Hooper, Martin

2017-01-01

TIMSS and PIRLS assess representative samples of students at regular intervals, measuring trends in student achievement and student contexts for learning. Because individual students are not tracked over time, analysis of international large-scale assessment data is usually conducted cross-sectionally. Gustafsson (2007) proposed examining the data…

Ged® Completers' Perceptions of College Readiness and Social Capital: Linking Adult Literacy to a Greater Quality of Life

ERIC Educational Resources Information Center

Lott, Donalyn; O'Dell, Jade

2014-01-01

This study examined the efficacy of general education development (GED®) acquisition and GED® completers' perceptions of college readiness and social capital using a quantitative methodology. Also, the study used a descriptive, cross-sectional research design framed by the social capital theoretical perspective. The conceptual framework developed…

Age Differences in Five Personality Domains across the Life Span

ERIC Educational Resources Information Center

Allemand, Mathias; Zimprich, Daniel; Hendriks, A. A. Jolijn

2008-01-01

The present study addresses the issue of age differences in 5 personality domains across the life span in a cross-sectional study. In contrast to most previous studies, the present study follows a methodologically more rigorous approach to warrant that age-related differences in personality structure and mean level can be meaningfully compared. It…

Total Quality Management in Secondary Schools in Kenya: Extent of Practice

ERIC Educational Resources Information Center

Ngware, Moses Waithanji; Wamukuru, David Kuria; Odebero, Stephen Onyango

2006-01-01

Purpose: To investigate the extent to which secondary schools practiced aspects of total quality management (TQM). Design/methodology/approach: A cross-sectional research design was used in this study. A sample of 300 teachers in a residential session during a school holiday provided their perceptions on the practice of TQM in their schools. Data…

Evaluation of the Effects of Vocational Choice and Practical Training on Students' Employability

ERIC Educational Resources Information Center

Kagaari, James R. K.

2007-01-01

Purpose: The purpose of this article is to demonstrate the need for Kyambogo to pay special attention to students' vocational choices, university based training and employability. Design/methodology/approach: The sample of 46 final year students, 90 graduates and 50 supervisors using cross sectional survey design was used to collect data.…

A Confirmatory Factor Analysis for SERVPERF Instrument Based on a Sample of Students from Syrian Universities

ERIC Educational Resources Information Center

Mahmoud, Ali Bassam; Khalifa, Bayan

2015-01-01

Purpose: The purpose of this paper is to confirm the factorial structure of SERVPERF based on an exploration of its dimensionality among Syrian universities' students. It also aimed at assessing the perceived service quality offered at these universities. Design/methodology/approach: A cross-sectional survey was conducted targeting students at…

Networking and Managers' Career Success in the Malaysian Public Sector: The Moderating Effect of Managerial Level

ERIC Educational Resources Information Center

Rasdi, Roziah Mohd; Garavan, Thomas N.; Ismail, Maimunah

2012-01-01

Purpose: The purpose of this paper is to investigate how managerial level moderates the relationships between networking behaviours and career success (objective and subjective) in the context of a public sector organisation in Malaysia. Design/methodology/approach: The study utilised a cross-sectional design and investigated these relationships…

Family Structure, Mother-Child Communication, Father-Child Communication, and Adolescent Life Satisfaction: A Cross-Sectional Multilevel Analysis

ERIC Educational Resources Information Center

Levin, Kate A.; Currie, Candace

2010-01-01

Purpose: The purpose of this paper is to investigate the association between mother-child and father-child communication and children's life satisfaction, and the moderating effect of communication with stepparents. Design/methodology/approach: Data from the 2006 Health Behaviour in School-aged Children: WHO-collaborative Study in Scotland…

School as a Determinant for Health Outcomes--A Structural Equation Model Analysis

ERIC Educational Resources Information Center

Ravens-Sieberer, Ulrike; Freeman, John; Kokonyei, Gyongyi; Thomas, Christiane A.; Erhart, Michael

2009-01-01

Purpose: The purpose of this paper is to investigate whether students' perceptions of their school environment and their adjustment to school are associated with health outcomes across gender and age groups. Design/methodology/approach: Data from the cross-sectional international Health Behavior in School-aged Children Survey of the year 2002…

Preservice Teachers' Social Networking Use, Concerns, and Educational Possibilities: Trends from 2008 to 2012

ERIC Educational Resources Information Center

Hughes, Joan E.; Ko, Yujung; Lim, Mihyun; Liu, Sa

2015-01-01

This four-year, cross-sectional study, situated in one U.S. university, investigated 206 preservice teachers' use of social network services (SNS) in teacher preparation and their disposition toward using it in their future teaching. Using descriptive survey methodology, results revealed nearly all preservice teachers used a general SNS (e.g.,…

Correlates of Precoital Behaviors, Intentions, and Sexual Initiation among Thai Adolescents

ERIC Educational Resources Information Center

Atwood, Katharine A.; Zimmerman, Rick; Cupp, Pamela K.; Fongkaew, Warunee; Miller, Brenda A.; Byrnes, Hilary F.; Chamratrithirong, Aphichat; Rhucharoenpornpanich, Orratai; Chaiphet, Nonthathorn; Rosati, Michael J.; Chookhare, Warunee

2012-01-01

This paper examines the risk and protective factors associated with sexual behaviors among Thai youth ages 13-14 (N=420) living in Bangkok, Thailand. Cross-sectional data were collected using a random sample of households methodology. Three outcomes were assessed: (1) intention to engage in sexual intercourse, (2) pre-coital behaviors, and (3)…

Anomalies in Economics Enrollment: 1991-1992 to 1995-1996

ERIC Educational Resources Information Center

Lombardi, Waldo; Ramrattan, Lall B.; Szenberg, Michael

2004-01-01

This paper presents data and empirical models to explain the causes of the decline in the enrollment of economics majors during the 1991-1992 to 1995-1996 academic years. It first discusses the theoretical bases for a qualitative analysis of this type. It then discusses a sample survey methodology used to obtain cross-sectional information from…

An Unscented Kalman Filter Approach to the Estimation of Nonlinear Dynamical Systems Models

ERIC Educational Resources Information Center

Chow, Sy-Miin; Ferrer, Emilio; Nesselroade, John R.

2007-01-01

In the past several decades, methodologies used to estimate nonlinear relationships among latent variables have been developed almost exclusively to fit cross-sectional models. We present a relatively new estimation approach, the unscented Kalman filter (UKF), and illustrate its potential as a tool for fitting nonlinear dynamic models in two ways:…

Analyzing Upper Secondary Education Dropout in Latin America through a Cohort Approach

ERIC Educational Resources Information Center

Kattan, Raja Bentaouet; Székely, Miguel

2017-01-01

This study examines recent trends and factors in school dropout at the upper secondary education level across Latin America. The methodology employs repeated cross sections of data to track the life cycle path of cohorts of individuals in 18 countries. A key finding is that while upper secondary enrollment rates increased in the region, dropout…

Willingness of Medical Students for Hepatitis B & C Screening

ERIC Educational Resources Information Center

Ahmad, Iftikhar; Mahsud, Muhammad Amin Jan; Hussain, Javed; Khan, Muhammad Hussain; Khan, Habibullah; Noman, Nargis; Rabi, Fazle, Din, Siraj ud

2010-01-01

Background: Health care workers including medical students are vulnerable to hepatitis B & C virus infections. The objective of this study was to determine the level of willingness for screening among medical students. Methodology: This cross-sectional survey was carried out at Gomal Medical College, Dera Ismail Khan from 1st April 2010 to 15…

BUGJEFF311.BOLIB (JEFF-3.1.1) and BUGENDF70.BOLIB (ENDF/B-VII.0) - Generation Methodology and Preliminary Testing of two ENEA-Bologna Group Cross Section Libraries for LWR Shielding and Pressure Vessel Dosimetry

NASA Astrophysics Data System (ADS)

Pescarini, Massimo; Sinitsa, Valentin; Orsi, Roberto; Frisoni, Manuela

2016-02-01

Two broad-group coupled neutron/photon working cross section libraries in FIDO-ANISN format, dedicated to LWR shielding and pressure vessel dosimetry applications, were generated following the methodology recommended by the US ANSI/ANS-6.1.2-1999 (R2009) standard. These libraries, named BUGJEFF311.BOLIB and BUGENDF70.BOLIB, are respectively based on JEFF-3.1.1 and ENDF/B-VII.0 nuclear data and adopt the same broad-group energy structure (47 n + 20 γ) of the ORNL BUGLE-96 similar library. They were respectively obtained from the ENEA-Bologna VITJEFF311.BOLIB and VITENDF70.BOLIB libraries in AMPX format for nuclear fission applications through problem-dependent cross section collapsing with the ENEA-Bologna 2007 revision of the ORNL SCAMPI nuclear data processing system. Both previous libraries are based on the Bondarenko self-shielding factor method and have the same AMPX format and fine-group energy structure (199 n + 42 γ) as the ORNL VITAMIN-B6 similar library from which BUGLE-96 was obtained at ORNL. A synthesis of a preliminary validation of the cited BUGLE-type libraries, performed through 3D fixed source transport calculations with the ORNL TORT-3.2 SN code, is included. The calculations were dedicated to the PCA-Replica 12/13 and VENUS-3 engineering neutron shielding benchmark experiments, specifically conceived to test the accuracy of nuclear data and transport codes in LWR shielding and radiation damage analyses.

Currently available methodologies for the processing of intravascular ultrasound and optical coherence tomography images.

PubMed

Athanasiou, Lambros; Sakellarios, Antonis I; Bourantas, Christos V; Tsirka, Georgia; Siogkas, Panagiotis; Exarchos, Themis P; Naka, Katerina K; Michalis, Lampros K; Fotiadis, Dimitrios I

2014-07-01

Optical coherence tomography and intravascular ultrasound are the most widely used methodologies in clinical practice as they provide high resolution cross-sectional images that allow comprehensive visualization of the lumen and plaque morphology. Several methods have been developed in recent years to process the output of these imaging modalities, which allow fast, reliable and reproducible detection of the luminal borders and characterization of plaque composition. These methods have proven useful in the study of the atherosclerotic process as they have facilitated analysis of a vast amount of data. This review presents currently available intravascular ultrasound and optical coherence tomography processing methodologies for segmenting and characterizing the plaque area, highlighting their advantages and disadvantages, and discusses the future trends in intravascular imaging.

A new automated method for the determination of cross-section limits in ephemeral gullies

NASA Astrophysics Data System (ADS)

Castillo, Carlos; Ángel Campo-Bescós, Miguel; Casalí, Javier; Giménez, Rafael

2017-04-01

The assessment of gully erosion relies on the estimation of the soil volume enclosed by cross sections limits. Both 3D and 2D methods require the application of a methodology for the determination of the cross-section limits what has been traditionally carried out in two ways: a) by visual inspection of the cross-section by a certain expert operator; b) by the automated identification of thresholds for different geometrical variables such as elevation, slope or plan curvature obtained from the cross-section profile. However, for these last methods, typically, the thresholds are not of general application because they depend on absolute values valid only for the local gully conditions where they were derived. In this communication we evaluate an automated method for cross-section delimitation of ephemeral gullies and compare its performance with the visual assessment provided by five scientists experienced in gully erosion assessment, defining gully width, depth and area for a total of 60 ephemeral gullies cross-sections obtained from field surveys conducted on agricultural plots in Navarra (Spain). The automated method only depends on the calculation of a simple geometrical measurement, which is the bank trapezoid area for every point of each gully bank. This rectangle trapezoid (right-angled trapezoid) is defined by the elevation of a given point, the minimum elevation and the extremes of the cross-section. The gully limit for each bank is determined by the point in the bank with the maximum trapezoid area. The comparison of the estimates among the different expert operators showed large variation coefficients (up to 70%) in a number of cross-sections, larger for cross sections width and area and smaller for cross sections depth. The automated method produced comparable results to those obtained by the experts and was the procedure with the highest average correlation with the rest of the methods for the three dimensional parameters. The errors of the automated method when compared with the average estimate of the experts were occasionally high (up to 40%), in line with the variability found among experts. The automated method showed no apparent systematic errors which approximately followed a normal distribution, although these errors were slightly biased towards overestimation for the depth and area parameters. In conclusion, this study shows that there is not a single definition of gully limits even among gully experts where a large variability was found. The bank trapezoid method was found to be an automated, easy-to-use (readily implementable in a basic excel spread-sheet or programming scripts), threshold-independent procedure to determine consistently gully limits similar to expert-derived estimates. Gully width and area calculations were more prone to errors than gully depth, which was the least sensitive parameter.

Features of Cross-Correlation Analysis in a Data-Driven Approach for Structural Damage Assessment

PubMed Central

Camacho Navarro, Jhonatan; Ruiz, Magda; Villamizar, Rodolfo; Mujica, Luis

2018-01-01

This work discusses the advantage of using cross-correlation analysis in a data-driven approach based on principal component analysis (PCA) and piezodiagnostics to obtain successful diagnosis of events in structural health monitoring (SHM). In this sense, the identification of noisy data and outliers, as well as the management of data cleansing stages can be facilitated through the implementation of a preprocessing stage based on cross-correlation functions. Additionally, this work evidences an improvement in damage detection when the cross-correlation is included as part of the whole damage assessment approach. The proposed methodology is validated by processing data measurements from piezoelectric devices (PZT), which are used in a piezodiagnostics approach based on PCA and baseline modeling. Thus, the influence of cross-correlation analysis used in the preprocessing stage is evaluated for damage detection by means of statistical plots and self-organizing maps. Three laboratory specimens were used as test structures in order to demonstrate the validity of the methodology: (i) a carbon steel pipe section with leak and mass damage types, (ii) an aircraft wing specimen, and (iii) a blade of a commercial aircraft turbine, where damages are specified as mass-added. As the main concluding remark, the suitability of cross-correlation features combined with a PCA-based piezodiagnostic approach in order to achieve a more robust damage assessment algorithm is verified for SHM tasks. PMID:29762505

Features of Cross-Correlation Analysis in a Data-Driven Approach for Structural Damage Assessment.

PubMed

Camacho Navarro, Jhonatan; Ruiz, Magda; Villamizar, Rodolfo; Mujica, Luis; Quiroga, Jabid

2018-05-15

This work discusses the advantage of using cross-correlation analysis in a data-driven approach based on principal component analysis (PCA) and piezodiagnostics to obtain successful diagnosis of events in structural health monitoring (SHM). In this sense, the identification of noisy data and outliers, as well as the management of data cleansing stages can be facilitated through the implementation of a preprocessing stage based on cross-correlation functions. Additionally, this work evidences an improvement in damage detection when the cross-correlation is included as part of the whole damage assessment approach. The proposed methodology is validated by processing data measurements from piezoelectric devices (PZT), which are used in a piezodiagnostics approach based on PCA and baseline modeling. Thus, the influence of cross-correlation analysis used in the preprocessing stage is evaluated for damage detection by means of statistical plots and self-organizing maps. Three laboratory specimens were used as test structures in order to demonstrate the validity of the methodology: (i) a carbon steel pipe section with leak and mass damage types, (ii) an aircraft wing specimen, and (iii) a blade of a commercial aircraft turbine, where damages are specified as mass-added. As the main concluding remark, the suitability of cross-correlation features combined with a PCA-based piezodiagnostic approach in order to achieve a more robust damage assessment algorithm is verified for SHM tasks.

Does Family Structure Matter? Comparing the Life Goals and Aspirations of Learners in Secondary Schools

ERIC Educational Resources Information Center

Davids, Eugene Lee; Roman, Nicolette Vanessa

2013-01-01

The aim of this study was to compare the goals and aspirations of learners from single- and two-parent families. The study used a quantitative methodology with a cross-sectional comparative group design. The sample consisted of 853 Grade 11 learners from secondary schools in the Northern, Southern and Metro Central education districts in the…

Subjective Health and Mental Well-Being of Adolescents and the Health Promoting School: A Cross-Sectional Multilevel Analysis

ERIC Educational Resources Information Center

Levin, Kate; Inchley, Jo; Currie, Dorothy; Currie, Candace

2012-01-01

Purpose: The aim of this paper is to examine the impact of the health promoting school (HPS) on adolescent well-being. Design/methodology/approach: Data from the 2006 Health Behaviour in School-aged Children: WHO-collaborative Study in Scotland were analysed using multilevel linear regression analyses for outcome measures: happiness, confidence,…

Training Valence, Instrumentality, and Expectancy Scale (T-VIES-it): Factor Structure and Nomological Network in an Italian Sample

ERIC Educational Resources Information Center

Zaniboni, Sara; Fraccaroli, Franco; Truxillo, Donald M.; Bertolino, Marilena; Bauer, Talya N.

2011-01-01

Purpose: The purpose of this study is to validate, in an Italian sample, a multidimensional training motivation measure (T-VIES-it) based on expectancy (VIE) theory, and to examine the nomological network surrounding the construct. Design/methodology/approach: Using a cross-sectional design study, 258 public sector employees in Northeast Italy…

Antecedents of Teachers Fostering Effort within Two Different Management Regimes: An Assessment-Based Accountability Regime and Regime without External Pressure on Results

ERIC Educational Resources Information Center

Christophersen, Knut-Andreas; Elstad, Eyvind; Turmo, Are

2012-01-01

This article focuses on the comparison of organizational antecedents of teachers' fostering of students' effort in two quite different accountability regimes: one management regime with an external-accountability system and one with no external accountability devices. The methodology involves cross-sectional surveys from two different management…

Farmers' Participation in Extension Programs and Technology Adoption in Rural Nepal: A Logistic Regression Analysis

ERIC Educational Resources Information Center

Suvedi, Murari; Ghimire, Raju; Kaplowitz, Michael

2017-01-01

Purpose: This paper examines the factors affecting farmers' participation in extension programs and adoption of improved seed varieties in the hills of rural Nepal. Methodology/approach: Cross-sectional farm-level data were collected during July and August 2014. A sample of 198 farm households was selected for interviewing by using a multistage,…

Mediating Effects of Coping, Personal Belief, and Social Support on the Relationship among Stress, Depression, and Smoking Behaviour in University Students

ERIC Educational Resources Information Center

Sun, Jing; Buys, Nicholas; Stewart, Donald; Shum, David

2011-01-01

Purpose: The purpose of this paper is to investigate whether university students' smoking behaviour is associated with higher levels of stress and depression directly, or indirectly, via the mediation of coping, personal beliefs and social support. Design/methodology/approach: The study design involves a cross-sectional survey. Structural equation…

Factors Associated with the Utilization and Quality of Prenatal Care in Western Rural Regions of China

ERIC Educational Resources Information Center

Dongxu, Wang; Yuhui, Shi; Stewart, Donald; Chun, Chang; Chaoyang, Li

2012-01-01

Purpose: The paper seeks to identify key features of prenatal care utilization and quality in western regions of China and to determine the factors affecting the quality of prenatal care. Design/methodology/approach: A descriptive, cross-sectional study was conducted. The instrument for the study was a 10-stem respondent-administered, structured…

Irregular Breakfast Eating and Associated Health Behaviors: A Pilot Study among College Students

ERIC Educational Resources Information Center

Thiagarajah, Krisha; Torabi, Mohammad R.

2009-01-01

The purpose of this study was to examine prevalence of eating breakfast and associated health compromising behaviors. This study utilized a cross-sectional survey methodology. A purposive cluster sampling technique was utilized to collect data from a representative sample of college students in a Midwestern university in the U.S. A total of 1,257…

Using Works of Art to Give a Voice to Culturally Diverse Students: Q-Methodology Study

ERIC Educational Resources Information Center

Beck, Paula D.

2017-01-01

The current study by Beck (2014) investigated whether any relationship exists between a cross-section of 48 fourth-grade elementary-school students and their artistic judgments regarding the seven elements of art: color, form, line, shape, space, texture, and value. Each of these elements of art affects our senses and might offer a better…

A Method of Assembling Cross-Sectional Indicators into a Community Quality of Life

ERIC Educational Resources Information Center

Epley, Donald R.; Menon, Mohan

2008-01-01

This study develops a new method of measuring quality of life at the local and state level. Further, it presents a methodology that combines heterogeneous indicators from different fields, such as economics, social, and health, into one total measurement. The technique shown can be used to compare one region with another, or compare one metro area…

School and Emotional Well-Being: A Transcultural Analysis on Youth in Southern Spain

ERIC Educational Resources Information Center

Soriano, Encarnación; Cala, Verónica C. C.

2018-01-01

Purpose: The purpose of this paper is to assess and compare school well-being (SW) and emotional well-being (EW) among Romanian, Moroccan and Spanish youth, to determine the degree of relation between EW and scholar well-being. Design/methodology/approach: The paper employed cross-sectional research with cluster sampling in two primary schools and…

The Influence of Cooperative Education and Reflection upon Previous Work Experiences on University Graduates' Vocational Self-Concept

ERIC Educational Resources Information Center

Drewery, David; Nevison, Colleen; Pretti, T. Judene

2016-01-01

Purpose: The purpose of this paper is to assess the relative effects of participation in cooperative education (co-op) and engagement in reflection upon previous work experiences on undergraduate students' vocational self-concept (VSC) at graduation. Design/methodology/approach: A cross-sectional survey of graduating students (n = 1,483) from a…

Estimating the Occurrence of Child Maltreatment and Risk-Factor Effects: Benefits of a Mixed-Design Strategy in Epidemiologic Research.

ERIC Educational Resources Information Center

Bertolli, Jeanne; And Others

1995-01-01

This article discusses methodologic limitations of four observational study designs (ecologic, case-control, cross-sectional, and cohort) that dominate the child abuse and neglect literature and identifies key features of an "ideal" study of child maltreatment. It proposes a new mixed-design strategy, which improves ability to identify child…

An Assessment of Resource Availability for Problem Based Learning in a Ghanaian University Setting

ERIC Educational Resources Information Center

Okyere, Gabriel Asare; Tawiah, Richard; Lamptey, Richard Bruce; Oduro, William; Thompson, Michael

2017-01-01

Purpose: The purpose of this paper is to assess the differences pertaining to the resources presently accessible for problem-based learning (PBL) among six colleges of Kwame Nkrumah University of Science and Technology (KNUST) in Ghana. Design/methodology/approach: Data for the study are the cross-sectional type drawn from 1,020 students. Poisson…

Gender-Related Differences in the Occupational Aspirations and Career-Style Preferences of Accounting Students: A Cross-Sectional Comparison between Academic School Years

ERIC Educational Resources Information Center

Danziger, Nira; Eden, Yoram

2007-01-01

Purpose: The purpose of this paper is to examine whether gendered differences in occupational aspirations still appear when considering students with similar abilities who study competitively in the same achievement-oriented educational setting. Design/methodology/approach: The hypotheses stipulated an interaction between gender and year of study…

Determination of demineralization depth in tooth enamel exposed to abusive use of whitening gel using micro-Energy Dispersive X ray Fluorescence

NASA Astrophysics Data System (ADS)

Pessanha, Sofia; Coutinho, Sara; Carvalho, Maria Luisa; Silveira, João Miguel; Mata, António

2017-12-01

In this work, we present a methodology for the determination of the depth of demineralization in dental enamel caused by extended use of an Over-The-Counter (OTC) whitening product. Teeth whitening is a very common practice in Dentistry, but concerns have been raised regarding the invasiveness of the treatment, especially regarding OTC products, that can be used without medical supervision and sometimes with concentrations of active agent that exceed the allowed regulations. In this work, we studied tooth enamel samples, treated with a whitening product during an extended period of time, both directly on the enamel surface and in the cross-section. Specimens were analyzed using microbeam X-Ray Fluorescence (micro-XRF) using polycapillary optics to obtain a spot down to 25 μm. Due to the relatively large spot size of our setup point analysis of the cross-sections would be inadequate. This way, line scans were performed instead, before and after whitening, and using appropriate data treatment the depth of demineralization was inferred. The used methodology indicated an average demineralization depth of 25 μm, the same order of magnitude as the aprismatic enamel layer.

Low energy electron-molecule scattering using the R-matrix method

NASA Astrophysics Data System (ADS)

Gorfinkiel, Jimena

2014-10-01

The study of electron-molecule collisions continues to attract significant interest stimulated, in no small part, by the need for collisional data to model a number of physical environments and applied processes (e.g. the modelling of focused electron beam induced deposition and the description of the interaction of radiation with biological matter). This need for electron scattering data (cross sections but also information on the temporary negative ions, TNI, that can be formed) has motivated the renewed development of theoretical methodology and their computational implementation. I will present the latest developments in the study of low energy electron scattering from molecules and molecular clusters using the R-matrix method. Recent calculations on electron collisions with biologically relevant molecules have shed light on the formation of core-excited TNI these larger targets. The picture that emerges is much more complex than previously thought. I will discuss some examples as well as current and future developments of the methodology and software in order to provide more accurate collisional data (in particular cross sections) for bigger targets. In collaboration with Zdenek Masin, The Open University. This work was partially supported by EPSRC.

Challenges in examining area effects across the life course on physical capability in mid-life: findings from the 1946 British Birth Cohort.

PubMed

Murray, Emily T; Southall, Humphrey; Aucott, Paula; Tilling, Kate; Kuh, Diana; Hardy, Rebecca; Ben-Shlomo, Yoav

2012-03-01

A major limitation of past work linking area socioeconomic conditions to health in mid-life has been the reliance on single point in time measurement of area. Using the MRC National Survey of Health and Development, this study for the first time linked place of residence at three major life periods of childhood (1950), young adulthood (1972), and mid-life (1999) to area-socioeconomic data from the nearest census years. Using objective measures of physical capability as the outcome, the purpose of this study was to highlight four methodological challenges of attrition bias, secular changes in socio-economic measures, historical data availability, and changing reporting units over time. In general, standing balance and chair rise time showed clear cross-sectional associations with residing in areas with high deprivation. However, it was the process of overcoming the methodological challenges, which led to the conclusion that in this example percent low social class occupations was the most appropriate measure to use when extending cross-sectional analysis of standing balance and chair rise to life course investigation. Published by Elsevier Ltd.

Modeling CANDU-6 liquid zone controllers for effects of thorium-based fuels

DOE Office of Scientific and Technical Information (OSTI.GOV)

St-Aubin, E.; Marleau, G.

2012-07-01

We use the DRAGON code to model the CANDU-6 liquid zone controllers and evaluate the effects of thorium-based fuels on their incremental cross sections and reactivity worth. We optimize both the numerical quadrature and spatial discretization for 2D cell models in order to provide accurate fuel properties for 3D liquid zone controller supercell models. We propose a low computer cost parameterized pseudo-exact 3D cluster geometries modeling approach that avoids tracking issues on small external surfaces. This methodology provides consistent incremental cross sections and reactivity worths when the thickness of the buffer region is reduced. When compared with an approximate annularmore » geometry representation of the fuel and coolant region, we observe that the cluster description of fuel bundles in the supercell models does not increase considerably the precision of the results while increasing substantially the CPU time. In addition, this comparison shows that it is imperative to finely describe the liquid zone controller geometry since it has a strong impact of the incremental cross sections. This paper also shows that liquid zone controller reactivity worth is greatly decreased in presence of thorium-based fuels compared to the reference natural uranium fuel, since the fission and the fast to thermal scattering incremental cross sections are higher for the new fuels. (authors)« less

Parton distributions with small- x resummation: evidence for BFKL dynamics in HERA data

NASA Astrophysics Data System (ADS)

Ball, Richard D.; Bertone, Valerio; Bonvini, Marco; Marzani, Simone; Rojo, Juan; Rottoli, Luca

2018-04-01

We present a determination of the parton distribution functions of the proton in which NLO and NNLO fixed-order calculations are supplemented by NLL x small- x resummation. Deep-inelastic structure functions are computed consistently at NLO+NLLx or NNLO+NLLx, while for hadronic processes small- x resummation is included only in the PDF evolution, with kinematic cuts introduced to ensure the fitted data lie in a region where the fixed-order calculation of the hard cross-sections is reliable. In all other respects, the fits use the same methodology and are based on the same global dataset as the recent NNPDF3.1 analysis. We demonstrate that the inclusion of small- x resummation leads to a quantitative improvement in the perturbative description of the HERA inclusive and charm-production reduced cross-sections in the small x region. The impact of the resummation in our fits is greater at NNLO than at NLO, because fixed-order calculations have a perturbative instability at small x due to large logarithms that can be cured by resummation. We explore the phenomenological implications of PDF sets with small- x resummation for the longitudinal structure function F_L at HERA, for parton luminosities and LHC benchmark cross-sections, for ultra-high-energy neutrino-nucleus cross-sections, and for future high-energy lepton-proton colliders such as the LHeC.

Measurements of 67Ga production cross section induced by protons on natZn in the low energy range from 1.678 to 2.444 MeV

NASA Astrophysics Data System (ADS)

Wachter, J. A.; Miranda, P. A.; Morales, J. R.; Cancino, S. A.; Correa, R.

2015-02-01

The experimental production cross section for the reaction natZn(p,x)67Ga has been measured in the energy range from 1.678 to 2.444 MeV. The methodology used in this work is based on characteristic X-ray emitted after irradiation by the daughter nuclei that decays by electron capture (EC) and the use of a complementary PIXE experiment. By doing so, expressions needed to determine cross section values are simplified since experimental factors such as geometric setup and an detector efficiency are avoided. 67Ga is a radionuclide particularly suited for this method since it decays by electron capture in 100% and the subsequent characteristic X-ray emission is easily detected. Natural zinc targets were fabricated by PVD technique and afterwards their thicknesses were determined by Rutherford Backscattering Spectrometry. Cross sections measurements were carried out by using the Van de Graaff accelerator located at Faculty of Sciences, University of Chile. It was found that our data for the natZn(p,x)67Ga reaction are, in general, in good agreement when compared to existing experimental data and to those calculated ALICE/ASH nuclear code. On the other hand, values predicted by Talys-1.6 are showing systematically lower magnitudes than our measured data.

Studying the effect of cracks on the ultrasonic wave propagation in a two dimensional gearbox finite element model

NASA Astrophysics Data System (ADS)

Ozevin, Didem; Fazel, Hossein; Cox, Justin; Hardman, William; Kessler, Seth S.; Timmons, Alan

2014-04-01

Gearbox components of aerospace structures are typically made of brittle materials with high fracture toughness, but susceptible to fatigue failure due to continuous cyclic loading. Structural Health Monitoring (SHM) methods are used to monitor the crack growth in gearbox components. Damage detection methodologies developed in laboratory-scale experiments may not represent the actual gearbox structural configuration, and are usually not applicable to real application as the vibration and wave properties depend on the material, structural layers and thicknesses. Also, the sensor types and locations are key factors for frequency content of ultrasonic waves, which are essential features for pattern recognition algorithm development in noisy environments. Therefore, a deterministic damage detection methodology that considers all the variables influencing the waveform signature should be considered in the preliminary computation before any experimental test matrix. In order to achieve this goal, we developed two dimensional finite element models of a gearbox cross section from front view and shaft section. The cross section model consists of steel revolving teeth, a thin layer of oil, and retention plate. An ultrasonic wave up to 1 MHz frequency is generated, and waveform histories along the gearbox are recorded. The received waveforms under pristine and cracked conditions are compared in order to analyze the crack influence on the wave propagation in gearbox, which can be utilized by both active and passive SHM methods.

EuropeaN Energy balance Research to prevent excessive weight Gain among Youth (ENERGY) project: Design and methodology of the ENERGY cross-sectional survey.

PubMed

van Stralen, Maartje M; te Velde, Saskia J; Singh, Amika S; De Bourdeaudhuij, Ilse; Martens, Marloes K; van der Sluis, Maria; Manios, Yannis; Grammatikaki, Evangelia; Chinapaw, Mai J M; Maes, Lea; Bere, Elling; Jensen, Jorgen; Moreno, Luis; Jan, Nataša; Molnár, Dénes; Moore, Helen; Brug, Johannes

2011-01-31

Obesity treatment is by large ineffective long term, and more emphasis on the prevention of excessive weight gain in childhood and adolescence is warranted. To inform energy balance related behaviour (EBRB) change interventions, insight in the potential personal, family and school environmental correlates of these behaviours is needed. Studies on such multilevel correlates of EBRB among schoolchildren in Europe are lacking. The ENERGY survey aims to (1) provide up-to-date prevalence rates of measured overweight, obesity, self-reported engagement in EBRBs, and objective accelerometer-based assessment of physical activity and sedentary behaviour and blood-sample biomarkers of metabolic function in countries in different regions of Europe, (2) to identify personal, family and school environmental correlates of these EBRBs. This paper describes the design, methodology and protocol of the survey. A school-based cross-sectional survey was carried out in 2010 in seven different European countries; Belgium, Greece, Hungary, the Netherlands, Norway, Slovenia, and Spain. The survey included measurements of anthropometrics, child, parent and school-staff questionnaires, and school observations to measure and assess outcomes (i.e. height, weight, and waist circumference), EBRBs and potential personal, family and school environmental correlates of these behaviours including the social-cultural, physical, political, and economic environmental factors. In addition, a selection of countries conducted accelerometer measurements to objectively assess physical activity and sedentary behaviour, and collected blood samples to assess several biomarkers of metabolic function. The ENERGY survey is a comprehensive cross-sectional study measuring anthropometrics and biomarkers as well as assessing a range of EBRBs and their potential correlates at the personal, family and school level, among 10-12 year old children in seven European countries. This study will result in a unique dataset, enabling cross country comparisons in overweight, obesity, risk behaviours for these conditions as well as the correlates of engagement in these risk behaviours.

Equity in the finance of health care: some further international comparisons.

PubMed

Wagstaff, A; van Doorslaer, E; van der Burg, H; Calonge, S; Christiansen, T; Citoni, G; Gerdtham, U G; Gerfin, M; Gross, L; Häkinnen, U; Johnson, P; John, J; Klavus, J; Lachaud, C; Lauritsen, J; Leu, R; Nolan, B; Perán, E; Pereira, J; Propper, C; Puffer, F; Rochaix, L; Rodríguez, M; Schellhorn, M; Winkelhake, O

1999-06-01

This paper presents further international comparisons of progressivity of health care financing systems. The paper builds on the work of Wagstaff et al. [Wagstaff, A., van Doorslaer E., et al., 1992. Equity in the finance of health care: some international comparisons, Journal of Health Economics 11, pp. 361-387] but extends it in a number of directions: we modify the methodology used there and achieve a higher degree of cross-country comparability in variable definitions; we update and extend the cross-section of countries; and we present evidence on trends in financing mixes and progressivity.

Use of multispectral satellite remote sensing to assess mixing of suspended sediment downstream of large river confluences

NASA Astrophysics Data System (ADS)

Umar, M.; Rhoads, Bruce L.; Greenberg, Jonathan A.

2018-01-01

Although past work has noted that contrasts in turbidity often are detectable on remotely sensed images of rivers downstream from confluences, no systematic methodology has been developed for assessing mixing over distance of confluent flows with differing surficial suspended sediment concentrations (SSSC). In contrast to field measurements of mixing below confluences, satellite remote-sensing can provide detailed information on spatial distributions of SSSC over long distances. This paper presents a methodology that uses remote-sensing data to estimate spatial patterns of SSSC downstream of confluences along large rivers and to determine changes in the amount of mixing over distance from confluences. The method develops a calibrated Random Forest (RF) model by relating training SSSC data from river gaging stations to derived spectral indices for the pixels corresponding to gaging-station locations. The calibrated model is then used to predict SSSC values for every river pixel in a remotely sensed image, which provides the basis for mapping of spatial variability in SSSCs along the river. The pixel data are used to estimate average surficial values of SSSC at cross sections spaced uniformly along the river. Based on the cross-section data, a mixing metric is computed for each cross section. The spatial pattern of change in this metric over distance can be used to define rates and length scales of surficial mixing of suspended sediment downstream of a confluence. This type of information is useful for exploring the potential influence of various controlling factors on mixing downstream of confluences, for evaluating how mixing in a river system varies over time and space, and for determining how these variations influence water quality and ecological conditions along the river.

Forward and inverse functional variations in rotationally inelastic scattering

NASA Astrophysics Data System (ADS)

Guzman, Robert; Rabitz, Herschel

1986-09-01

This paper considers the response of various rotational energy transfer processes to functional variations about an assumed model intermolecular potential. Attention is focused on the scattering of an atom and a linear rigid rotor. The collision dynamics are approximated by employing both the infinite order sudden (IOS) and exponential distorted wave (EDW) methods to describe Ar-N2 and He-H2, respectively. The following cross sections are considered: state-to-state differential and integral, final state summed differential and integral, and effective diffusion and viscosity cross sections. Attention is first given to the forward sensitivity densities δ0/δV(R,r) where 0 denotes any of the aforementioned cross sections, R is the intermolecular distance, and r is the internal coordinates. These forward sensitivity densities (functional derivatives) offer a quantitative measure of the importance of different regions of the potential surface to a chosen cross section. Via knowledge of the forward sensitivities and a particular variation δV(R,r) the concomitant response δ0 is generated. It was found that locally a variation in the potential can give rise to a large response in the cross sections as measured by these forward densities. In contrast, a unit percent change in the overall potential produced a 1%-10% change in the cross sections studied indicating that the large + and - responses to local variations tend to cancel. In addition, inverse sensitivity densities δV(R,r)/δ0 are obtained. These inverse densities are of interest since they are the exact solution to the infinitesimal inverse scattering problem. Although the inverse sensitivity densities do not in themselves form an inversion algorithm, they do offer a quantitative measure of the importance of performing particular measurements for the ultimate purpose of inversion. Using a set of state-to-state integral cross sections we found that the resultant responses from the infinitesimal inversion were typically small such that ‖δV(R,r)‖≪‖V(R,r)‖. From the viewpoint of an actual inversion, these results indicate that only through an extensive effort will significant knowledge of the potential be gained from the cross sections. All of these calculations serve to illustrate the methodology, and other observables as well as dynamical schemes could be explored as desired.

Effect of Thyrotropin Suppression Therapy on Bone in Thyroid Cancer Patients

PubMed Central

Hawley, Sarah T.; Haymart, Megan R.

2016-01-01

Background. The thyroid cancer incidence is rising. Despite current guidelines, controversy exists regarding the degree and duration of thyrotropin suppression therapy. Also, its potential skeletal effects remain a concern to physicians caring for thyroid cancer patients. We conducted a review of published data to evaluate existing studies focusing on the skeletal effects of thyrotropin suppression therapy in thyroid cancer patients. Materials and Methods. A systematic search of the PubMed, Ovid/Medline, and Cochrane Central Register of Controlled Trials databases was conducted. The retained studies were evaluated for methodological quality, and the study populations were categorized into premenopausal women, postmenopausal women, and men. Results. Twenty-five pertinent studies were included. Seven studies were longitudinal and 18 were cross-sectional. Of the 25 included studies, 13 were assigned an excellent methodological quality score. Three of 5 longitudinal studies and 3 of 13 cross-sectional studies reported decreased bone mineral density (BMD) in premenopausal women; 2 of 4 longitudinal studies and 5 of 13 cross-sectional studies reported decreased BMD in postmenopausal women. The remaining studies showed no effect on BMD. The only longitudinal study of men showed bone mass loss; however, cross-sectional studies of men did not demonstrate a similar effect. Conclusion. Studies to date have yielded conflicting results on the skeletal effects of thyrotropin suppression therapy and a knowledge gap remains, especially for older adults and men. Existing data should be cautiously interpreted because of the variable quality and heterogeneity. Identifying groups at risk of adverse effects from thyrotropin suppression therapy will be instrumental to providing focused and tailored thyroid cancer treatment. Implications for Practice: The standard treatment for thyroid cancer includes total thyroidectomy with or without radioactive iodine ablation, often followed by thyrotropin suppression therapy. Despite current guidelines, controversy exists regarding the degree and duration of thyrotropin suppression therapy, and discordant results have been reported on its adverse effects on bone. The present review provides physicians with existing data on the skeletal effects of thyrotropin suppression therapy, highlighting the need for further research to identify the groups at risk of adverse skeletal effects. This knowledge will aid in developing tailored thyroid cancer treatment. PMID:26659220

Effect of Thyrotropin Suppression Therapy on Bone in Thyroid Cancer Patients.

PubMed

Papaleontiou, Maria; Hawley, Sarah T; Haymart, Megan R

2016-02-01

The thyroid cancer incidence is rising. Despite current guidelines, controversy exists regarding the degree and duration of thyrotropin suppression therapy. Also, its potential skeletal effects remain a concern to physicians caring for thyroid cancer patients. We conducted a review of published data to evaluate existing studies focusing on the skeletal effects of thyrotropin suppression therapy in thyroid cancer patients. A systematic search of the PubMed, Ovid/Medline, and Cochrane Central Register of Controlled Trials databases was conducted. The retained studies were evaluated for methodological quality, and the study populations were categorized into premenopausal women, postmenopausal women, and men. Twenty-five pertinent studies were included. Seven studies were longitudinal and 18 were cross-sectional. Of the 25 included studies, 13 were assigned an excellent methodological quality score. Three of 5 longitudinal studies and 3 of 13 cross-sectional studies reported decreased bone mineral density (BMD) in premenopausal women; 2 of 4 longitudinal studies and 5 of 13 cross-sectional studies reported decreased BMD in postmenopausal women. The remaining studies showed no effect on BMD. The only longitudinal study of men showed bone mass loss; however, cross-sectional studies of men did not demonstrate a similar effect. Studies to date have yielded conflicting results on the skeletal effects of thyrotropin suppression therapy and a knowledge gap remains, especially for older adults and men. Existing data should be cautiously interpreted because of the variable quality and heterogeneity. Identifying groups at risk of adverse effects from thyrotropin suppression therapy will be instrumental to providing focused and tailored thyroid cancer treatment. The standard treatment for thyroid cancer includes total thyroidectomy with or without radioactive iodine ablation, often followed by thyrotropin suppression therapy. Despite current guidelines, controversy exists regarding the degree and duration of thyrotropin suppression therapy, and discordant results have been reported on its adverse effects on bone. The present review provides physicians with existing data on the skeletal effects of thyrotropin suppression therapy, highlighting the need for further research to identify the groups at risk of adverse skeletal effects. This knowledge will aid in developing tailored thyroid cancer treatment. ©AlphaMed Press.

Practical Issues of Conducting a Q Methodology Study: Lessons Learned From a Cross-cultural Study.

PubMed

Stone, Teresa Elizabeth; Maguire, Jane; Kang, Sook Jung; Cha, Chiyoung

This article advances nursing research by presenting the methodological challenges experienced in conducting a multination Q-methodology study. This article critically analyzes the relevance of the methodology for cross-cultural and nursing research and the challenges that led to specific responses by the investigators. The use of focus groups with key stakeholders supplemented the Q-analysis results. The authors discuss practical issues and shared innovative approaches and provide best-practice suggestions on the use of this flexible methodology. Q methodology has the versatility to explore complexities of contemporary nursing practice and cross-cultural health research.

Individual and Contextual Factors Influencing Engagement in Learning Activities after Errors at Work: A Replication Study in a German Retail Bank

ERIC Educational Resources Information Center

Leicher, Veronika; Mulder, Regina H.

2016-01-01

Purpose: The purpose of this replication study is to identify relevant individual and contextual factors influencing learning from errors at work and to determine if the predictors for learning activities are the same for the domains of nursing and retail banking. Design/methodology/approach: A cross-sectional replication study was carried out in…

Failure analysis of electronic parts: Laboratory methods. [for destructive and nondestructive testing

NASA Technical Reports Server (NTRS)

Anstead, R. J. (Editor); Goldberg, E. (Editor)

1975-01-01

Failure analysis test methods are presented for use in analyzing candidate electronic parts and in improving future design reliability. Each test is classified as nondestructive, semidestructive, or destructive. The effects upon applicable part types (i.e. integrated circuit, transitor) are discussed. Methodology is given for performing the following: immersion tests, radio graphic tests, dewpoint tests, gas ambient analysis, cross sectioning, and ultraviolet examination.

Statistical Properties of SEE Rate Calculation in the Limits of Large and Small Event Counts

NASA Technical Reports Server (NTRS)

Ladbury, Ray

2007-01-01

This viewgraph presentation reviews the Statistical properties of Single Event Effects (SEE) rate calculations. The goal of SEE rate calculation is to bound the SEE rate, though the question is by how much. The presentation covers: (1) Understanding errors on SEE cross sections, (2) Methodology: Maximum Likelihood and confidence Contours, (3) Tests with Simulated data and (4) Applications.

Why Missing Data Matter in the Longitudinal Study of Adolescent Development: Using the 4-H Study to Understand the Uses of Different Missing Data Methods

ERIC Educational Resources Information Center

Jelicic, Helena; Phelps, Erin; Lerner, Richard M.

2010-01-01

The study of adolescent development rests on methodologically appropriate collection and interpretation of longitudinal data. While all longitudinal studies of adolescent development involve missing data, the methods to treat missingness that have been recommended most often focus on missing data from cross-sectional studies. The problems of…

Working towards Best Practice in Assessment. A Case Study Approach to Some Issues Concerning Competency-Based Assessment in the Vocational Education and Training Sector.

ERIC Educational Resources Information Center

Bloch, Barbara; Thomson, Peter

Between July and November 1993, a cross-section of Australia's school- and workplace-based vocational education and training programs was studied to identify programs using innovative assessment strategies and materials. As innovative strategies/materials were identified, the study methodology was revised and a case study approach was adopted. The…

An Investigation of Teacher Candidates' Metagocnitive Skills According to Their Year of Study at Canakkale

ERIC Educational Resources Information Center

Çetin,Baris

2015-01-01

The aim of the present study was to investigate the differences in teacher candidates' metacognitive skills analyzed according to the year of study in their undergraduate program they were in. The research methodology in the study was survey. Among survey types, the cross-sectional design was used. The sample of the study included a total of 1072…

Smoking in Australian University Students and Its Association with Socio-Demographic Factors, Stress, Health Status, Coping Strategies, and Attitude

ERIC Educational Resources Information Center

Sun, Jing; Buys, Nicholas; Stewart, Donald; Shum, David; Farquhar, Lynette

2011-01-01

Purpose: This study aims to evaluate the prevalence of smoking amongst university students in Brisbane, Australia and associated risk factors. Design/methodology/approach: A cross-sectional design was used for the study. A sample of 2,414 university students aged 18-30 was examined to estimate the prevalence of tobacco use. Smoking was measured by…

Porter's Five Competitive Forces Framework and Other Factors That Influence the Choice of Response Strategies Adopted by Public Universities in Kenya

ERIC Educational Resources Information Center

Mathooko, Francis M.; Ogutu, Martin

2015-01-01

Purpose: The purpose of this paper is to establish the extent to which Porter's five competitive forces (PFCF) framework, among other factors drive the choice of response strategies adopted by public universities in Kenya. Design/Methodology/Approach: The study design was descriptive and utilized a cross-sectional survey of all the public…

Methodological considerations in region of interest definitions for paraspinal muscles in axial MRIs of the lumbar spine.

PubMed

Berry, David B; Padwal, Jennifer; Johnson, Seth; Parra, Callan L; Ward, Samuel R; Shahidi, Bahar

2018-05-07

Magnetic Resonance Imaging (MRI) is commonly used to assess the health of the lumbar spine and supporting structures. Studies have suggested that fatty infiltration of the posterior lumbar muscles is important in predicting responses to treatment for low back pain. However, methodological differences exist in defining the region of interest (ROI) of a muscle, which limits the ability to compare data between studies. The purpose of this study was to determine reliability and systematic differences within and between two commonly utilized methodologies for ROI definitions of lumbar paraspinal muscle. T2-weighted MRIs of the mid-L4 vertebrae from 37 patients with low back pain who were scheduled for lumbar spine surgery were included from a hospital database. Fatty infiltration for these patients ranged from low to high, based on Kjaer criteria. Two methods were used to define ROI: 1) segmentation of the multifidus and erector spinae based on fascial planes including epimuscular fat, and 2) segmentation of the multifidus and erector spinae based on visible muscle boundaries, which did not include epimuscular fat. Total cross sectional area (tCSA), fat signal fraction (FSF), muscle cross sectional area, and fat cross sectional area were measured. Degree of agreement between raters for each parameter was assessed using intra-class correlation coefficients (ICC) and area fraction of overlapping voxels. Excellent inter-rater agreement (ICC > 0.75) was observed for all measures for both methods. There was no significant difference between area fraction overlap of ROIs between methods. Method 1 demonstrated a greater tCSA for both the erector spinae (14-15%, p < 0.001) and multifidus (4%, p < 0.016) but a greater FSF only for the erector spinae (11-13%, p < 0.001). The two methods of defining lumbar spine muscle ROIs demonstrated excellent inter-rater reliability, although significant differences exist as method 1 showed larger CSA and FSF values compared to method 2. The results of this study confirm the validity of using either method to measure lumbar paraspinal musculature, and that method should be selected based on the primary outcome variables of interest.

PROTEUS-SN User Manual

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shemon, Emily R.; Smith, Micheal A.; Lee, Changho

2016-02-16

PROTEUS-SN is a three-dimensional, highly scalable, high-fidelity neutron transport code developed at Argonne National Laboratory. The code is applicable to all spectrum reactor transport calculations, particularly those in which a high degree of fidelity is needed either to represent spatial detail or to resolve solution gradients. PROTEUS-SN solves the second order formulation of the transport equation using the continuous Galerkin finite element method in space, the discrete ordinates approximation in angle, and the multigroup approximation in energy. PROTEUS-SN’s parallel methodology permits the efficient decomposition of the problem by both space and angle, permitting large problems to run efficiently on hundredsmore » of thousands of cores. PROTEUS-SN can also be used in serial or on smaller compute clusters (10’s to 100’s of cores) for smaller homogenized problems, although it is generally more computationally expensive than traditional homogenized methodology codes. PROTEUS-SN has been used to model partially homogenized systems, where regions of interest are represented explicitly and other regions are homogenized to reduce the problem size and required computational resources. PROTEUS-SN solves forward and adjoint eigenvalue problems and permits both neutron upscattering and downscattering. An adiabatic kinetics option has recently been included for performing simple time-dependent calculations in addition to standard steady state calculations. PROTEUS-SN handles void and reflective boundary conditions. Multigroup cross sections can be generated externally using the MC2-3 fast reactor multigroup cross section generation code or internally using the cross section application programming interface (API) which can treat the subgroup or resonance table libraries. PROTEUS-SN is written in Fortran 90 and also includes C preprocessor definitions. The code links against the PETSc, METIS, HDF5, and MPICH libraries. It optionally links against the MOAB library and is a part of the SHARP multi-physics suite for coupled multi-physics analysis of nuclear reactors. This user manual describes how to set up a neutron transport simulation with the PROTEUS-SN code. A companion methodology manual describes the theory and algorithms within PROTEUS-SN.« less

The Systematic Interpretation of Cosmic Ray Data (The Transport Project)

NASA Technical Reports Server (NTRS)

Guzik, T. Gregory

1997-01-01

The Transport project's primary goals were to: (1) Provide measurements of critical fragmentation cross sections; (2) Study the cross section systematics; (3) Improve the galactic cosmic ray propagation methodology; and (4) Use the new cross section measurements to improve the interpretation of cosmic ray data. To accomplish these goals a collaboration was formed consisting of researchers in the US at Louisiana State University (LSU), Lawrence Berkeley Laboratory (LBL), Goddard Space Flight Center (GSFC), the University of Minnesota (UM), New Mexico State University (NMSU), in France at the Centre d'Etudes de Saclay and in Italy at the Universita di Catania. The US institutions, lead by LSU, were responsible for measuring new cross sections using the LBL HISS facility, analysis of these measurements and their application to interpreting cosmic ray data. France developed a liquid hydrogen target that was used in the HISS experiment and participated in the data interpretation. Italy developed a Multifunctional Neutron Spectrometer (MUFFINS) for the HISS runs to measure the energy spectra, angular distributions and multiplicities of neutrons emitted during the high energy interactions. The Transport Project was originally proposed to NASA during Summer, 1988 and funding began January, 1989. Transport was renewed twice (1991, 1994) and finally concluded at LSU on September, 30, 1997. During the more than 8 years of effort we had two major experiment runs at LBL, obtained data on the interaction of twenty different beams with a liquid hydrogen target, completed the analysis of fifteen of these datasets obtaining 590 new cross section measurements, published nine journal articles as well as eighteen conference proceedings papers, and presented more than thirty conference talks.

Methodology of shell structure reinforcement layout optimization

NASA Astrophysics Data System (ADS)

Szafrański, Tomasz; Małachowski, Jerzy; Damaziak, Krzysztof

2018-01-01

This paper presents an optimization process of a reinforced shell diffuser intended for a small wind turbine (rated power of 3 kW). The diffuser structure consists of multiple reinforcement and metal skin. This kind of structure is suitable for optimization in terms of selection of reinforcement density, stringers cross sections, sheet thickness, etc. The optimisation approach assumes the reduction of the amount of work to be done between the optimization process and the final product design. The proposed optimization methodology is based on application of a genetic algorithm to generate the optimal reinforcement layout. The obtained results are the basis for modifying the existing Small Wind Turbine (SWT) design.

Stress and coping in interracial contexts: The influence of race-based rejection sensitivity and cross-group friendship in daily experiences of health

PubMed Central

Page-Gould, Elizabeth; Mendoza-Denton, Rodolfo; Mendes, Wendy Berry

2014-01-01

We examined the interplay of psychosocial risk and protective factors in daily experiences of health. In Study 1, the tendency to anxiously expect rejection from racial outgroup members, termed race-based rejection sensitivity (RS-race), was cross-sectionally related to greater stress-symptoms among Black adults who reported fewer cross-race friends but not among participants who had more cross-race friends. In Study 2, we experimentally manipulated the development of a same- versus cross-race friendship among Latino/a-White dyads prior to collecting daily experiences of stress-symptoms using a diary methodology. While RS-race predicted more psychosomatic symptoms in the same-race friendship condition, RS-race was unrelated to symptomatology among participants who made a cross-race friend. These findings suggest that experiences of intergroup stress can spill over into everyday life in the absence of positive contact, but cross-race friendships may be a resource that mitigates the expression of interracial stress. PMID:25045176

Psychosocial Support Issues Affecting Older Patients: A Cross-sectional Paramedic Perspective.

PubMed

Ross, Linda; Jennings, Paul; Williams, Brett

2017-01-01

This research aimed to gain an understanding of the psychosocial support needs of older patients in the out-of-hospital setting from the perspective of paramedics. Specifically, we investigate if and how paramedics are able to meet the needs of older adults, and the barriers preventing them from achieving this. This study was a cross-sectional study utilizing a sequential design with both quantitative and qualitative methodologies. All participants agreed or strongly agreed that older patients have needs beyond the physical and that they would like to do more for older patients. Paramedics discussed that psychosocial support issues are rarely in isolation and straightforward but were often coupled with broader, longer term physical health and social support issues. They would like to be able to do more for patients but feel hamstrung by lack of time, resources, and know-how.

Suzuki-miyaura cross-coupling in acylation reactions, scope and recent developments.

PubMed

Blangetti, Marco; Rosso, Heléna; Prandi, Cristina; Deagostino, Annamaria; Venturello, Paolo

2013-01-17

Since the first report and due to its handiness and wide scope, the Suzuki-Miyaura (SM) cross coupling reaction has become a routine methodology in many laboratories worldwide. With respect to other common transition metal catalyzed cross couplings, the SM reaction has been so far less exploited as a tool to introduce an acyl function into a specific substrate. In this review, the various approaches found in the literature will be considered, starting from the direct SM acylative coupling to the recent developments of cross coupling between boronates and acyl chlorides or anhydrides. Special attention will be dedicated to the use of masked acyl boronates, alkoxy styryl and alkoxy dienyl boronates as coupling partners. A final section will be then focused on the acyl SM reaction as key synthetic step in the framework of natural products synthesis.

Methodological issues in HIV-related social research in Nigeria.

PubMed

Erinosho, Olayiwola; Joseph, Richard; Isiugo-Abanihe, Uche; Dike, Nkem; Aderinto, Adeyinka A

2013-12-01

This paper is about methodological issues in a community-wide study in Nigeria on an infectious disease, namely HIV/AIDS. The study was designed to ascertain the risk factors that contribute to the spread of HIV/AIDS and how that can be tackled in order to bring about behavioural change. The research team believed at the onset that a study on the interplay between HIV/AIDS and sensitive issues like sexual mores and sexuality requires much more than a straightjacket social science method, such as simply doing a cross-section study and/or using interview schedule. This paper reviews the essence of cross-disciplinary approach; team building; as well as the use of a non-participatory observational approach in data collection. It also shows why ample consideration was given to ethical issues which are often glossed over in social research in developing countries. The lessons from the study underscore the methodological imperatives in social research that focus on sensitive issues in largely non-literate context like Nigeria. Although there are formidable challenges in community-based studies in largely non-literate societies, nevertheless they could easily be surmounted if there are ample time and resources to navigate the various sticking points.

Estimation of uncertainty for contour method residual stress measurements

DOE PAGES

Olson, Mitchell D.; DeWald, Adrian T.; Prime, Michael B.; ...

2014-12-03

This paper describes a methodology for the estimation of measurement uncertainty for the contour method, where the contour method is an experimental technique for measuring a two-dimensional map of residual stress over a plane. Random error sources including the error arising from noise in displacement measurements and the smoothing of the displacement surfaces are accounted for in the uncertainty analysis. The output is a two-dimensional, spatially varying uncertainty estimate such that every point on the cross-section where residual stress is determined has a corresponding uncertainty value. Both numerical and physical experiments are reported, which are used to support the usefulnessmore » of the proposed uncertainty estimator. The uncertainty estimator shows the contour method to have larger uncertainty near the perimeter of the measurement plane. For the experiments, which were performed on a quenched aluminum bar with a cross section of 51 × 76 mm, the estimated uncertainty was approximately 5 MPa (σ/E = 7 · 10⁻⁵) over the majority of the cross-section, with localized areas of higher uncertainty, up to 10 MPa (σ/E = 14 · 10⁻⁵).« less

Unconventional bearing capacity analysis and optimization of multicell box girders.

PubMed

Tepic, Jovan; Doroslovacki, Rade; Djelosevic, Mirko

2014-01-01

This study deals with unconventional bearing capacity analysis and the procedure of optimizing a two-cell box girder. The generalized model which enables the local stress-strain analysis of multicell girders was developed based on the principle of cross-sectional decomposition. The applied methodology is verified using the experimental data (Djelosevic et al., 2012) for traditionally formed box girders. The qualitative and quantitative evaluation of results obtained for the two-cell box girder is realized based on comparative analysis using the finite element method (FEM) and the ANSYS v12 software. The deflection function obtained by analytical and numerical methods was found consistent provided that the maximum deviation does not exceed 4%. Multicell box girders are rationally designed support structures characterized by much lower susceptibility of their cross-sectional elements to buckling and higher specific capacity than traditionally formed box girders. The developed local stress model is applied for optimizing the cross section of a two-cell box carrier. The author points to the advantages of implementing the model of local stresses in the optimization process and concludes that the technological reserve of bearing capacity amounts to 20% at the same girder weight and constant load conditions.

Terrestrial laser scanning used to detect asymmetries in boat hulls

NASA Astrophysics Data System (ADS)

Roca-Pardiñas, Javier; López-Alvarez, Francisco; Ordóñez, Celestino; Menéndez, Agustín; Bernardo-Sánchez, Antonio

2012-01-01

We describe a methodology for identifying asymmetries in boat hull sections reconstructed from point clouds captured using a terrestrial laser scanner (TLS). A surface was first fit to the point cloud using a nonparametric regression method that permitted the construction of a continuous smooth surface. Asymmetries in cross-sections of the surface were identified using a bootstrap resampling technique that took into account uncertainty in the coordinates of the scanned points. Each reconstructed section was analyzed to check, for a given level of significance, that it was within the confidence interval for the theoretical symmetrical section. The method was applied to the study of asymmetries in a medium-sized yacht. Identified were differences of up to 5 cm between the real and theoretical sections in some parts of the hull.

Monte Carlo Calculation of Thermal Neutron Inelastic Scattering Cross Section Uncertainties by Sampling Perturbed Phonon Spectra

NASA Astrophysics Data System (ADS)

Holmes, Jesse Curtis

Nuclear data libraries provide fundamental reaction information required by nuclear system simulation codes. The inclusion of data covariances in these libraries allows the user to assess uncertainties in system response parameters as a function of uncertainties in the nuclear data. Formats and procedures are currently established for representing covariances for various types of reaction data in ENDF libraries. This covariance data is typically generated utilizing experimental measurements and empirical models, consistent with the method of parent data production. However, ENDF File 7 thermal neutron scattering library data is, by convention, produced theoretically through fundamental scattering physics model calculations. Currently, there is no published covariance data for ENDF File 7 thermal libraries. Furthermore, no accepted methodology exists for quantifying or representing uncertainty information associated with this thermal library data. The quality of thermal neutron inelastic scattering cross section data can be of high importance in reactor analysis and criticality safety applications. These cross sections depend on the material's structure and dynamics. The double-differential scattering law, S(alpha, beta), tabulated in ENDF File 7 libraries contains this information. For crystalline solids, S(alpha, beta) is primarily a function of the material's phonon density of states (DOS). Published ENDF File 7 libraries are commonly produced by calculation and processing codes, such as the LEAPR module of NJOY, which utilize the phonon DOS as the fundamental input for inelastic scattering calculations to directly output an S(alpha, beta) matrix. To determine covariances for the S(alpha, beta) data generated by this process, information about uncertainties in the DOS is required. The phonon DOS may be viewed as a probability density function of atomic vibrational energy states that exist in a material. Probable variation in the shape of this spectrum may be established that depends on uncertainties in the physics models and methodology employed to produce the DOS. Through Monte Carlo sampling of perturbations from the reference phonon spectrum, an S(alpha, beta) covariance matrix may be generated. In this work, density functional theory and lattice dynamics in the harmonic approximation are used to calculate the phonon DOS for hexagonal crystalline graphite. This form of graphite is used as an example material for the purpose of demonstrating procedures for analyzing, calculating and processing thermal neutron inelastic scattering uncertainty information. Several sources of uncertainty in thermal neutron inelastic scattering calculations are examined, including sources which cannot be directly characterized through a description of the phonon DOS uncertainty, and their impacts are evaluated. Covariances for hexagonal crystalline graphite S(alpha, beta) data are quantified by coupling the standard methodology of LEAPR with a Monte Carlo sampling process. The mechanics of efficiently representing and processing this covariance information is also examined. Finally, with appropriate sensitivity information, it is shown that an S(alpha, beta) covariance matrix can be propagated to generate covariance data for integrated cross sections, secondary energy distributions, and coupled energy-angle distributions. This approach enables a complete description of thermal neutron inelastic scattering cross section uncertainties which may be employed to improve the simulation of nuclear systems.

Job Characteristics and Mentoring in Pre-Schools: Mentoring Relationships among the Educational Staff When Challenged by Problem-Solving Tasks

ERIC Educational Resources Information Center

Waaland, Torbjorn

2013-01-01

Purpose: The purpose of this paper is to study the influence of problem-solving tasks on mentoring received, peer mentoring and mentoring provided. Design/methodology/approach: This cross-sectional survey was based on a questionnaire that was sent to a total of 435 employees from 29 pre-schools in Norway. A total of 284 responses were returned, a…

Low-Energy Proton Testing Methodology

NASA Technical Reports Server (NTRS)

Pellish, Jonathan A.; Marshall, Paul W.; Heidel, David F.; Schwank, James R.; Shaneyfelt, Marty R.; Xapsos, M.A.; Ladbury, Raymond L.; LaBel, Kenneth A.; Berg, Melanie; Kim, Hak S.;

A New Equivalence Theory Method for Treating Doubly Heterogeneous Fuel - II. Verifications

DOE PAGES

Choi, Sooyoung; Kong, Chidong; Lee, Deokjung; ...

2015-03-09

A new methodology has been developed recently to treat resonance self-shielding in systems for which the fuel compact region of a reactor lattice consists of small fuel grains dispersed in a graphite matrix. The theoretical development adopts equivalence theory in both micro- and macro-level heterogeneities to provide approximate analytical expressions for the shielded cross sections, which may be interpolated from a table of resonance integrals or Bondarenko factors using a modified background cross section as the interpolation parameter. This paper describes the first implementation of the theoretical equations in a reactor analysis code. In order to reduce discrepancies caused bymore » use of the rational approximation for collision probabilities in the original derivation, a new formulation for a doubly heterogeneous Bell factor is developed in this paper to improve the accuracy of doubly heterogeneous expressions. This methodology is applied to a wide range of pin cell and assembly test problems with varying geometry parameters, material compositions, and temperatures, and the results are compared with continuous-energy Monte Carlo simulations to establish the accuracy and range of applicability of the new approach. It is shown that the new doubly heterogeneous self-shielding method including the Bell factor correction gives good agreement with reference Monte Carlo results.« less

Mild cognitive impairment: historical development and summary of research

PubMed Central

Golomb, James; Kluger, Alan; Ferris, Steven H

2004-01-01

This review article broadly traces the historical development, diagnostic criteria, clinical and neuropathological characteristics, and treatment strategies related to mild cognitive impairment (MCI), The concept of MCI is considered in the context of other terms that have been developed to characterize the elderly with varying degrees of cognitive impairment Criteria based on clinical global scale ratings, cognitive test performance, and performance on other domains of functioning are discussed. Approaches employing clinical, neuropsychological, neuroimaging, biological, and molecular genetic methodology used in the validation of MCI are considered, including results from cross-sectional, longitudinal, and postmortem investigations. Results of recent drug treatment studies of MCI and related methodological issues are also addressed. PMID:22034453

Psychosocial Support Issues Affecting Older Patients: A Cross-sectional Paramedic Perspective

PubMed Central

Ross, Linda; Jennings, Paul; Williams, Brett

2017-01-01

This research aimed to gain an understanding of the psychosocial support needs of older patients in the out-of-hospital setting from the perspective of paramedics. Specifically, we investigate if and how paramedics are able to meet the needs of older adults, and the barriers preventing them from achieving this. This study was a cross-sectional study utilizing a sequential design with both quantitative and qualitative methodologies. All participants agreed or strongly agreed that older patients have needs beyond the physical and that they would like to do more for older patients. Paramedics discussed that psychosocial support issues are rarely in isolation and straightforward but were often coupled with broader, longer term physical health and social support issues. They would like to be able to do more for patients but feel hamstrung by lack of time, resources, and know-how. PMID:28965434

A cross impact methodology for the assessment of US telecommunications system with application to fiber optics development, volume 2

NASA Technical Reports Server (NTRS)

Martino, J. P.; Lenz, R. C., Jr.; Chen, K. L.; Kahut, P.; Sekely, R.; Weiler, J.

1979-01-01

The appendices for the cross impact methodology are presented. These include: user's guide, telecommunication events, cross impacts, projection of historical trends, and projection of trends in satellite communications.

Service Quality, User Satisfaction and Net-Benefits' Effect on e-School Success: The Case of NEPAD's e-School Pilot in Kenya

ERIC Educational Resources Information Center

Nyagowa, Hesbon O.; Ocholla, Dennis N.; Mutula, Stephen M.

2013-01-01

This study was conducted to determine the effect of a set of dimensions on e-School success in a cross-sectional study of NEPAD's e-School pilot in Kenya. All of the six e-Schools participating in the NEPAD's e-School pilot in Kenya were selected. The study used survey methodology. Students and teachers in those schools formed the study…

Systematic review finds major deficiencies in sample size methodology and reporting for stepped-wedge cluster randomised trials

PubMed Central

Martin, James; Taljaard, Monica; Girling, Alan; Hemming, Karla

2016-01-01

Background Stepped-wedge cluster randomised trials (SW-CRT) are increasingly being used in health policy and services research, but unless they are conducted and reported to the highest methodological standards, they are unlikely to be useful to decision-makers. Sample size calculations for these designs require allowance for clustering, time effects and repeated measures. Methods We carried out a methodological review of SW-CRTs up to October 2014. We assessed adherence to reporting each of the 9 sample size calculation items recommended in the 2012 extension of the CONSORT statement to cluster trials. Results We identified 32 completed trials and 28 independent protocols published between 1987 and 2014. Of these, 45 (75%) reported a sample size calculation, with a median of 5.0 (IQR 2.5–6.0) of the 9 CONSORT items reported. Of those that reported a sample size calculation, the majority, 33 (73%), allowed for clustering, but just 15 (33%) allowed for time effects. There was a small increase in the proportions reporting a sample size calculation (from 64% before to 84% after publication of the CONSORT extension, p=0.07). The type of design (cohort or cross-sectional) was not reported clearly in the majority of studies, but cohort designs seemed to be most prevalent. Sample size calculations in cohort designs were particularly poor with only 3 out of 24 (13%) of these studies allowing for repeated measures. Discussion The quality of reporting of sample size items in stepped-wedge trials is suboptimal. There is an urgent need for dissemination of the appropriate guidelines for reporting and methodological development to match the proliferation of the use of this design in practice. Time effects and repeated measures should be considered in all SW-CRT power calculations, and there should be clarity in reporting trials as cohort or cross-sectional designs. PMID:26846897

Methodological quality of quantitative lesbian, gay, bisexual, and transgender nursing research from 2000 to 2010.

PubMed

Johnson, Michael; Smyer, Tish; Yucha, Carolyn

2012-01-01

The purpose of this study was to evaluate the methodological quality of quantitative lesbian, gay, bisexual, and transgender nursing research from 2000 to 2010. Using a key word search in Cumulative Index to Nursing and Allied Health Literature, 188 studies were identified and 40 met the criteria, which included descriptive, experimental, quasi-experimental, or observational (case control, cohort, and cross-sectional) design. The methodological quality of these studies was similar to that reported for medical and nursing educational research. The foci of these lesbian, gay, bisexual, and transgender studies were biased toward human immunodeficiency virus, acquired immunodeficiency syndrome, and sexually transmitted diseases, and 58.5% of the funded research was related to human immunodeficiency virus or acquired immunodeficiency syndrome. To provide evidence-based health care to these populations, an understanding of the current state of research is crucial.

Methodological Challenges in Cross-Language Qualitative Research: A Research Review

PubMed Central

Squires, Allison

2009-01-01

Objectives Cross-language qualitative research occurs when a language barrier is present between researchers and participants. The language barrier is frequently mediated through the use of a translator or interpreter. The purpose of this critical review of cross-language qualitative research was three fold: 1) review the methods literature addressing cross language research; 2) synthesize the methodological recommendations from the literature into a list of criteria that could evaluate how researchers methodologically managed translators and interpreters in their qualitative studies; and 3) test these criteria on published cross-language qualitative studies. Data sources A group of 40 purposively selected cross-language qualitative studies found in nursing and health sciences journals. Review methods The synthesis of the cross-language methods literature produced 14 criteria to evaluate how qualitative researchers managed the language barrier between themselves and their study participants. To test the criteria, the researcher conducted a summative content analysis framed by discourse analysis techniques of the 40 cross-language studies. Results The evaluation showed that only 6 out of 40 studies met all the criteria recommended by the cross-language methods literature for the production of trustworthy results in cross-language qualitative studies. Multiple inconsistencies, reflecting disadvantageous methodological choices by cross-language researchers, appeared in the remaining 33 studies. To name a few, these included rendering the translator or interpreter as an invisible part of the research process, failure to pilot test interview questions in the participant’s language, no description of translator or interpreter credentials, failure to acknowledge translation as a limitation of the study, and inappropriate methodological frameworks for cross-language research. Conclusions The finding about researchers making the role of the translator or interpreter invisible during the research process supports studies completed by other authors examining this issue. The analysis demonstrated that the criteria produced by this study may provide useful guidelines for evaluating cross-language research and for novice cross-language researchers designing their first studies. Finally, the study also indicates that researchers attempting cross-language studies need to address the methodological issues surrounding language barriers between researchers and participants more systematically. PMID:18789799

Methodological challenges in cross-language qualitative research: a research review.

PubMed

Squires, Allison

2009-02-01

Cross-language qualitative research occurs when a language barrier is present between researchers and participants. The language barrier is frequently mediated through the use of a translator or interpreter. The purpose of this analysis of cross-language qualitative research was threefold: (1) review the methods literature addressing cross-language research; (2) synthesize the methodological recommendations from the literature into a list of criteria that could evaluate how researchers methodologically managed translators and interpreters in their qualitative studies; (3) test these criteria on published cross-language qualitative studies. A group of 40 purposively selected cross-language qualitative studies found in nursing and health sciences journals. The synthesis of the cross-language methods literature produced 14 criteria to evaluate how qualitative researchers managed the language barrier between themselves and their study participants. To test the criteria, the researcher conducted a summative content analysis framed by discourse analysis techniques of the 40 cross-language studies. The evaluation showed that only 6 out of 40 studies met all the criteria recommended by the cross-language methods literature for the production of trustworthy results in cross-language qualitative studies. Multiple inconsistencies, reflecting disadvantageous methodological choices by cross-language researchers, appeared in the remaining 33 studies. To name a few, these included rendering the translator or interpreter as an invisible part of the research process, failure to pilot test interview questions in the participant's language, no description of translator or interpreter credentials, failure to acknowledge translation as a limitation of the study, and inappropriate methodological frameworks for cross-language research. The finding about researchers making the role of the translator or interpreter invisible during the research process supports studies completed by other authors examining this issue. The analysis demonstrated that the criteria produced by this study may provide useful guidelines for evaluating cross-language research and for novice cross-language researchers designing their first studies. Finally, the study also indicates that researchers attempting cross-language studies need to address the methodological issues surrounding language barriers between researchers and participants more systematically.

Preliminary cross section of Englebright Lake sediments

USGS Publications Warehouse

Snyder, Noah P.; Hampton, Margaret A.

2003-01-01

Overview -- The Upper Yuba River Studies Program is a CALFED-funded, multidisciplinary investigation of the feasibility of introducing anadromous fish species to the Yuba River system upstream of Englebright Dam. Englebright Lake (Figure 1 on poster) is a narrow, 14-km-long reservoir located in the northern Sierra Nevada, northeast of Marysville, CA. The dam was completed in 1941 for the primary purpose of trapping sediment derived from mining operations in the Yuba River watershed. Possible management scenarios include lowering or removing Englebright Dam, which could cause the release of stored sediments and associated contaminants, such as mercury used extensively in 19th-century hydraulic gold mining. Transport of released sediment to downstream areas could increase existing problems including flooding and mercury bioaccumulation in sport fish. To characterize the extent, grain size, and chemistry of this sediment, a coring campaign was done in Englebright Lake in May and June 2002. More than twenty holes were drilled at 7 different locations along the longitudinal axis of the reservoir (Figure 4 on poster), recovering 6 complete sequences of post-reservoir deposition and progradation. Here, a longitudinal cross section of Englebright Lake is presented (Figure 5 on poster), including pre-dam and present-day topographic profiles, and sedimentologic sections for each coring site. This figure shows the deltaic form of the reservoir deposit, with a thick upper section consisting of sand and gravel overlying silt, a steep front, and a thinner lower section dominated by silt. The methodologies used to create the reservoir cross section are discussed in the lower part of this poster.

Geologic map of the Zarkashan-Anguri copper and gold deposits, Ghazni Province, Afghanistan, modified from the 1968 original map compilation of E.P. Meshcheryakov and V.P. Sayapin

USGS Publications Warehouse

Peters, Stephen G.; Stettner, Will R.; Masonic, Linda M.; Moran, Thomas W.

2011-01-01

This map is a modified version of Geological map of the area of Zarkashan-Anguri gold deposits, scale 1:50,000, which was compiled by E.P. Meshcheryakov and V.P. Sayapin in 1968. Scientists from the U.S. Geological Survey, in cooperation with the Afghan Geological Survey and the Task Force for Business and Stability Operations of the U.S. Department of Defense, studied the original document and related reports and also visited the field area in April 2010. This modified map, which includes a cross section, illustrates the geologic setting of the Zarkashan-Anguri copper and gold deposits. The map reproduces the topology (contacts, faults, and so forth) of the original Soviet map and cross section and includes modifications based on our examination of that and other documents, and based on observations made and sampling undertaken during our field visit. (Refer to the Introduction and the References in the Map PDF for an explanation of our methodology and for complete citations of the original map and related reports.) Elevations on the cross section are derived from the original Soviet topography and may not match the newer topography used on the current map.

Preface by the CW2014 Organizers-Including Program, Advisory Board, Participants and Photo

DOE PAGES

Neudecker, Denise; Kawano, Toshihiko; Talou, Patrick; ...

2015-01-09

This issue of the Nuclear Data Sheets contains the proceedings of the 'International Workshop on Nuclear Data Covariances'. This workshop was the third one in a series that started with the 'Workshop on Neutron Cross Section Covariances' (Port Je erson, USA, 2008) and continued with the 'Second Workshop on Neutron Cross Section Covariances' (Vienna, Austria, 2011). The current workshop returned to the US and took place in the center of the beautiful and historic city of Santa Fe, New Mexico, USA from April 28 to May 1, 2014. The purpose of this workshop was to bring together scientists in themore » field of nuclear data evaluation, nuclear reaction theory, reactor physics and associated experiments to review recent developments in nuclear data evaluation methodology as well as assess and discuss open questions regarding uncertainty estimates and associated formatting requirements from the point of view of the experimentalist, the theoretician, the evaluator as well as from application side, e.g. in transport calculations. The workshop was open to contributions on a wide variety of nuclear data observables (cross sections, fission yields, energy and angle spectra, etc.), from the resonance range up to the high energy range as well as for light to heavy elements.« less

Quantification of Material Fluorescence and Light Scattering Cross Sections Using Ratiometric Bandwidth-Varied Polarized Resonance Synchronous Spectroscopy.

PubMed

Xu, Joanna Xiuzhu; Hu, Juan; Zhang, Dongmao

2018-05-25

Presented herein is the ratiometric bandwidth-varied polarized resonance synchronous spectroscopy (BVPRS2) method for quantification of material optical activity spectra. These include the sample light absorption and scattering cross-section spectrum, the scattering depolarization spectrum, and the fluorescence emission cross-section and depolarization spectrum in the wavelength region where the sample both absorbs and emits. This ratiometric BVPRS2 spectroscopic method is a self-contained technique capable of quantitatively decoupling material fluorescence and light scattering signal contribution to its ratiometric BVPRS2 spectra through the linear curve-fitting of the ratiometric BVPRS2 signal as a function of the wavelength bandwidth used in the PRS2 measurements. Example applications of this new spectroscopic method are demonstrated with materials that can be approximated as pure scatterers, simultaneous photon absorbers/emitters, simultaneous photon absorbers/scatterers, and finally simultaneous photon absorbers/scatterers/emitters. Because the only instruments needed for this ratiometric BVPRS2 technique are the conventional UV-vis spectrophotometer and spectrofluorometer, this work should open doors for routine decomposition of material UV-vis extinction spectrum into its absorption and scattering component spectra. The methodology and insights provided in this work should be of broad significance to all chemical research that involves photon/matter interactions.

Uncertainty in the delayed neutron fraction in fuel assembly depletion calculations

NASA Astrophysics Data System (ADS)

Aures, Alexander; Bostelmann, Friederike; Kodeli, Ivan A.; Velkov, Kiril; Zwermann, Winfried

2017-09-01

This study presents uncertainty and sensitivity analyses of the delayed neutron fraction of light water reactor and sodium-cooled fast reactor fuel assemblies. For these analyses, the sampling-based XSUSA methodology is used to propagate cross section uncertainties in neutron transport and depletion calculations. Cross section data is varied according to the SCALE 6.1 covariance library. Since this library includes nu-bar uncertainties only for the total values, it has been supplemented by delayed nu-bar uncertainties from the covariance data of the JENDL-4.0 nuclear data library. The neutron transport and depletion calculations are performed with the TRITON/NEWT sequence of the SCALE 6.1 package. The evolution of the delayed neutron fraction uncertainty over burn-up is analysed without and with the consideration of delayed nu-bar uncertainties. Moreover, the main contributors to the result uncertainty are determined. In all cases, the delayed nu-bar uncertainties increase the delayed neutron fraction uncertainty. Depending on the fuel composition, the delayed nu-bar values of uranium and plutonium in fact give the main contributions to the delayed neutron fraction uncertainty for the LWR fuel assemblies. For the SFR case, the uncertainty of the scattering cross section of U-238 is the main contributor.

From cutting-edge pointwise cross-section to groupwise reaction rate: A primer

NASA Astrophysics Data System (ADS)

Sublet, Jean-Christophe; Fleming, Michael; Gilbert, Mark R.

2017-09-01

The nuclear research and development community has a history of using both integral and differential experiments to support accurate lattice-reactor, nuclear reactor criticality and shielding simulations, as well as verification and validation efforts of cross sections and emitted particle spectra. An important aspect to this type of analysis is the proper consideration of the contribution of the neutron spectrum in its entirety, with correct propagation of uncertainties and standard deviations derived from Monte Carlo simulations, to the local and total uncertainty in the simulated reactions rates (RRs), which usually only apply to one application at a time. This paper identifies deficiencies in the traditional treatment, and discusses correct handling of the RR uncertainty quantification and propagation, including details of the cross section components in the RR uncertainty estimates, which are verified for relevant applications. The methodology that rigorously captures the spectral shift and cross section contributions to the uncertainty in the RR are discussed with quantified examples that demonstrate the importance of the proper treatment of the spectrum profile and cross section contributions to the uncertainty in the RR and subsequent response functions. The recently developed inventory code FISPACT-II, when connected to the processed nuclear data libraries TENDL-2015, ENDF/B-VII.1, JENDL-4.0u or JEFF-3.2, forms an enhanced multi-physics platform providing a wide variety of advanced simulation methods for modelling activation, transmutation, burnup protocols and simulating radiation damage sources terms. The system has extended cutting-edge nuclear data forms, uncertainty quantification and propagation methods, which have been the subject of recent integral and differential, fission, fusion and accelerators validation efforts. The simulation system is used to accurately and predictively probe, understand and underpin a modern and sustainable understanding of the nuclear physics that is so important for many areas of science and technology; advanced fission and fuel systems, magnetic and inertial confinement fusion, high energy, accelerator physics, medical application, isotope production, earth exploration, astrophysics and homeland security.

Hepameta-- prevalence of hepatitis B/C and metabolic syndrome in population living in separated and segregated Roma settlements: a methodology for a cross-sectional population-based study using community-based approach.

PubMed

Gecková, Andrea Madarasová; Jarcuska, Peter; Mareková, Mária; Pella, Daniel; Siegfried, Leonard; Jarcuska, Pavol; Halánová, Monika

2014-03-01

Roma represent one of the largest and oldest minorities in Europe. Health of many of them, particularly those living in settlements, is heavily compromised by poor dwelling, low educational level, unemployment, and poverty rooted in generational poverty, segregation and discrimination. The cross-sectional population-based study using community based approach aimed to map the prevalence of viral hepatitis B/C and metabolic syndrome in the population living in separated and segregated Roma settlements and to compare it with the occurrence of the same health indicators in the majority population, considering selected risk and protective factors of these health indicators. The sample consisted of 452 Roma (mean age = 34.7; 35.2% men) and 403 non-Roma (mean age = 33.5; 45.9% men) respondents. Data were collected in 2011 via questionnaire, anthropometric measures and analysed blood and urine samples. A methodology used in the study as well as in the following scientific papers is described in the Methods section (i.e. study design, procedures, samples, methods including questionnaire, anthropometric measurements, physical measurements, blood and urine measurements). There are regions of declining prosperity due to high unemployment, long-term problems with poverty and depleted resources. Populations living in these areas, i.e. in Central and Eastern Europe in Roma settlements, are at risk of poverty, social exclusion and other factors affecting health. Therefore, we should look for successful long-term strategies and tools (e.g. Roma mediators, terrain work) in order to improve the future prospects of these minorities.

Inequalities in the spiritual health of young Canadians: a national, cross-sectional study.

PubMed

Michaelson, Valerie; Freeman, John; King, Nathan; Ascough, Hannah; Davison, Colleen; Trothen, Tracy; Phillips, Sian; Pickett, William

2016-11-28

Spiritual health, along with physical, emotional, and social aspects, is one of four domains of health. Assessment in this field of research is challenging methodologically. No contemporary population-based studies have profiled the spiritual health of adolescent Canadians with a focus on health inequalities. In a 2014 nationally representative sample of Canadians aged 11-15 years we therefore: (1) psychometrically evaluated a series of items used to assess the perceived importance of spiritual health and its four potential sub-domains (connections with: self, others, nature and the natural environment, and the transcendent) to adolescents; (2) described potential inequalities in spiritual health within adolescent populations, overall and by spiritual health sub-domain, by key socio-demographic factors. Cross-sectional analysis of survey reports from the 2014 (Cycle 7) of the Canadian Health Behaviour in School-aged Children study (weighted n = 25,036). Principal components analysis followed by confirmatory factor analysis were used to explore the psychometric properties of the spiritual health items and the associated composite scale describing perceived importance of spiritual health. Associations among this composite scale, its individual sub-domains, and key socio-demographic factors were then explored. The principal components analysis best supported a four-factor structure where the eight scale items loaded highly according to the original four domains. This was also supported in confirmatory factor analyses. We then combined the eight items into composite spiritual health score as supported by theory, principal components analysis findings, and acceptable tests of reliability. Further confirmatory factor analysis suggested the need for additional refinements to this scale. Based upon exploratory cross-sectional analyses, strong socio-demographic inequalities were observed in the spiritual health measures by age, gender, relative material wealth, immigration status, and province/territory. Study findings highlight potential inequalities in the spiritual health of young Canadians, as well as opportunities for methodological advances in the assessment of adolescent spiritual health in our population.

Burden of reduced work productivity among people with chronic knee pain: a systematic review.

PubMed

Agaliotis, Maria; Mackey, Martin G; Jan, Stephen; Fransen, Marlene

2014-09-01

The aims of this systematic review were to determine the prevalence of reduced work productivity among people with chronic knee pain as well as specifically categorise determinants of work productivity losses into individual, disease and work-related factors, conduct an evaluation of study methodological quality and present a best-evidence synthesis. We searched the literature using combinations of key words such as knee pain, knee osteoarthritis, absenteeism (days taken off work) and presenteeism (reduced productivity while at work) for observational studies published in English. Methodological quality appraisal and a best-evidence synthesis were used to pool the study findings. The studies were conducted exclusively in high income countries of North America, Western Europe and Hong Kong. 17 studies were included in the review, 10 measuring absenteeism and six measuring presenteeism. Of the 10 studies reporting absenteeism, seven found a 12-month absenteeism prevalence ranging from 5% to 22%. Only two studies evaluated presenteeism prevalence and reported a range from 66% to 71%. Using best-evidence synthesis: three high quality cohort studies and three cross-sectional studies provided strong evidence that knee pain or knee osteoarthritis was associated with absenteeism; two high quality cross-sectional studies and one cohort study provided limited evidence for an association with presenteeism; one cross-sectional study provided limited evidence for an association among age, high job demands and low coworker support and absenteeism among nurses with knee pain. No studies examined individual or work-related factors associated with presenteeism. A number of high quality studies consistently demonstrated that chronic knee pain or knee osteoarthritis is associated with absenteeism. However, data are lacking regarding presenteeism and individual or work-related risk factors for reduced work productivity among older workers with chronic knee pain. PROSPERO registry number: CRD42013004137. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

On the accuracy of explicitly correlated methods to generate potential energy surfaces for scattering calculations and clustering: application to the HCl-He complex.

PubMed

Ajili, Yosra; Hammami, Kamel; Jaidane, Nejm Eddine; Lanza, Mathieu; Kalugina, Yulia N; Lique, François; Hochlaf, Majdi

2013-07-07

We closely compare the accuracy of multidimensional potential energy surfaces (PESs) generated by the recently developed explicitly correlated coupled cluster (CCSD(T)-F12) methods in connection with the cc-pVXZ-F12 (X = D, T) and aug-cc-pVTZ basis sets and those deduced using the well-established orbital-based coupled cluster techniques employing correlation consistent atomic basis sets (aug-cc-pVXZ, X = T, Q, 5) and extrapolated to the complete basis set (CBS) limit. This work is performed on the benchmark rare gas-hydrogen halide interaction (HCl-He) system. These PESs are then incorporated into quantum close-coupling scattering dynamical calculations in order to check the impact of the accuracy of the PES on the scattering calculations. For this system, we deduced inelastic collisional data including (de-)excitation collisional and pressure broadening cross sections. Our work shows that the CCSD(T)-F12/aug-cc-pVTZ PES describes correctly the repulsive wall, the van der Waals minimum and long range internuclear distances whereas cc-pVXZ-F12 (X = D,T) basis sets are not diffuse enough for that purposes. Interestingly, the collision cross sections deduced from the CCSD(T)-F12/aug-cc-pVTZ PES are in excellent agreement with those obtained with CCSD(T)/CBS methodology. The position of the resonances and the general shape of these cross sections almost coincide. Since the cost of the electronic structure computations is reduced by several orders of magnitude when using CCSD(T)-F12/aug-cc-pVTZ compared to CCSD(T)/CBS methodology, this approach can be recommended as an alternative for generation of PESs of molecular clusters and for the interpretation of accurate scattering experiments as well as for a wide production of collisional data to be included in astrophysical and atmospherical models.

Risk Factors for Low Back Pain in Childhood and Adolescence: A Systematic Review.

PubMed

Calvo-Muñoz, Inmaculada; Kovacs, Francisco M; Roqué, Marta; Gago Fernández, Inés; Seco Calvo, Jesús

2018-05-01

To identify factors associated with low back pain (LBP) in children and adolescents. A systematic review was conducted (Prospero CRD42016038186). Observational studies analyzing LBP risk factors among participants aged between 9 and 16 were searched for in 13 electronic databases and 8 specialized journals until March 31, 2016, with no language restrictions. In addition, references in the identified studies were manually tracked. All identified studies that included ≥50 participants aged 9 to 16, were reviewed. Their methodological quality was assessed by 2 reviewers separately, using validated tools, which scored, from worst to best, 0 to 100 for cross-sectional and 0 to 12 for cohort studies. A sensitivity analysis only included studies that had adjusted for confounders, had ≥500 participants, and had a methodological score of ≥50%. A total of 5142 citations were screened and 61 studies, including 137,877 participants from 5 continents, were reviewed. Their mean (range) methodological scores were 74.56 (50 to 100) for cross-sectional studies and 7.36 (5 to 9) for cohort studies. The studies had assessed 35 demographic, clinical, biological, family, psychological, ergonomic, and lifestyle risk factors. The mean (range) prevalence of LBP ranged between 15.25% (3.20 to 57.00) for point prevalence and 38.98% (11.60 to 85.56) for lifetime prevalence. Results on the association between LBP and risk factors were inconsistent. In the sensitivity analysis, "older age" and "participation in competitive sports" showed a consistent association with LBP. Future studies should focus on muscle characteristics, the relationship between body and backpack weights, duration of carrying the backpack, characteristics of sport practice, and which are the factors associated with specifically chronic pain.

Quantifying and predicting interpretational uncertainty in cross-sections

NASA Astrophysics Data System (ADS)

Randle, Charles; Bond, Clare; Monaghan, Alison; Lark, Murray

2015-04-01

Cross-sections are often constructed from data to create a visual impression of the geologist's interpretation of the sub-surface geology. However as with all interpretations, this vision of the sub-surface geology is uncertain. We have designed and carried out an experiment with the aim of quantifying the uncertainty in geological cross-sections created by experts interpreting borehole data. By analysing different attributes of the data and interpretations we reflect on the main controls on uncertainty. A group of ten expert modellers at the British Geological Survey were asked to interpret an 11.4 km long cross-section from south-east Glasgow, UK. The data provided consisted of map and borehole data of the superficial deposits and shallow bedrock. Each modeller had a unique set of 11 boreholes removed from their dataset, to which their interpretations of the top of the bedrock were compared. This methodology allowed quantification of how far from the 'correct answer' each interpretation is at 11 points along each interpreted cross-section line; through comparison of the interpreted and actual bedrock elevations in the boreholes. This resulted in the collection of 110 measurements of the error to use in further analysis. To determine the potential control on uncertainty various attributes relating to the modeller, the interpretation and the data were recorded. Modellers were asked to fill out a questionnaire asking for information; such as how much 3D modelling experience they had, and how long it took them to complete the interpretation. They were also asked to record their confidence in their interpretations graphically, in the form of a confidence level drawn onto the cross-section. Initial analysis showed the majority of the experts' interpreted bedrock elevations within 5 metres of those recorded in the withheld boreholes. Their distribution is peaked and symmetrical about a mean of zero, indicating that there was no tendency for the experts to either under or over estimate the elevation of the bedrock. More complex analysis was completed in the form of linear mixed effects modelling. The modelling was used to determine if there were any correlations between the error and any other parameter recorded in the questionnaire, section or the initial dataset. This has resulted in the determination of both data based and interpreter based controls on uncertainty, adding insight into how uncertainty can be predicted, as well as how interpretation workflows can be improved. Our results will inform further experiments across a wide variety of geological situations to build understanding and best practice workflows for cross-section interpretation to reduce uncertainty.

Optical Cross-Sectional Muscle Area Determination of Drosophila Melanogaster Adult Indirect Flight Muscles.

PubMed

Selma-Soriano, Estela; Artero, Rubén; Llamusi, Beatriz

2018-03-31

Muscle mass wasting, known as muscle atrophy, is a common phenotype in Drosophila models of neuromuscular diseases. We have used the indirect flight muscles (IFMs) of flies, specifically the dorso-longitudinal muscles (DLM), as the experimental subject to measure the atrophic phenotype brought about by different genetic causes. In this protocol, we describe how to embed fly thorax muscles for semi thin sectioning, how to obtain a good contrast between muscle and the surrounding tissue, and how to process optical microscope images for semiautomatic acquisition of quantifiable data and analysis. We describe three specific applications of the methodological pipeline. First, we show how the method can be applied to quantify muscle degeneration in a myotonic dystrophy fly model; second, measurement of muscle cross-sectional area can help to identify genes that either promote or prevent muscle atrophy and/or muscle degeneration; third, this protocol can be applied to determine whether a candidate compound is able to significantly modify a given atrophic phenotype induced by a disease-causing mutation or by an environmental trigger.

[Methodological design for the National Survey Violence Against Women in Mexico].

PubMed

Olaiz, Gustavo; Franco, Aurora; Palma, Oswaldo; Echarri, Carlos; Valdez, Rosario; Herrera, Cristina

2006-01-01

To describe the methodology, the research designs used, the estimation and sample selection, variable definitions, collection instruments, and operative design and analytical procedures for the National Survey Violence Against Women in Mexico. A complex (two-step) cross-sectional study was designed and the qualitative design was carried out using in-depth interviews and participant observation in health care units. We obtained for the quantitative study a total of 26 240 interviews in women users of health services and 2 636 questionnaires for health workers; the survey is representative of the 32 Mexican states. For the qualitative study 26 in-depth interviews were conducted with female users and 60 interviews with health workers in the States of Quintana Roo, Coahuila and the Federal District.

Crossing trend analysis methodology and application for Turkish rainfall records

NASA Astrophysics Data System (ADS)

Şen, Zekâi

2018-01-01

Trend analyses are the necessary tools for depicting possible general increase or decrease in a given time series. There are many versions of trend identification methodologies such as the Mann-Kendall trend test, Spearman's tau, Sen's slope, regression line, and Şen's innovative trend analysis. The literature has many papers about the use, cons and pros, and comparisons of these methodologies. In this paper, a completely new approach is proposed based on the crossing properties of a time series. It is suggested that the suitable trend from the centroid of the given time series should have the maximum number of crossings (total number of up-crossings or down-crossings). This approach is applicable whether the time series has dependent or independent structure and also without any dependence on the type of the probability distribution function. The validity of this method is presented through extensive Monte Carlo simulation technique and its comparison with other existing trend identification methodologies. The application of the methodology is presented for a set of annual daily extreme rainfall time series from different parts of Turkey and they have physically independent structure.

The prevalence and determinants of catastrophic health expenditures attributable to non-communicable diseases in low- and middle-income countries: a methodological commentary.

PubMed

Goryakin, Yevgeniy; Suhrcke, Marc

2014-11-07

Non-communicable diseases (NCDs), while traditionally considered a "rich world"-problem, have been spreading fast in low and middle income countries and by now account for a large share of mortality and ill-health in these countries, too. In addition to the disease burden, NCDs may also impose a substantial economic cost. One way in which NCDs might impact people's economic well-being may be via the out-of-pocket expenditures required to cover treatment and other costs associated with suffering from an NCD. In this commentary, we identify and discuss the methodological challenges related to cross-country comparison of-out-of-pocket and catastrophic out-of-pocket health care expenditures, attributable to NCDs, focussing on low and middle income countries. There is significant evidence of substantial cost burden placed by NCDs on patients living in low and middle income countries, with most of it being heavily concentrated among low socioeconomic status groups. However, a large variation in definition of COOPE between studies prevents cross-country comparison. In addition, as most studies tend to be observational, causal inferences are often not possible. This is further complicated by the cross-sectional nature of studies, small sample sizes, and/or limited duration of follow-up of patients. Most evidence for certain conditions (e.g., cancer) tends to be collected in high-income countries only. The definitions for COOPEs should be standardized as much as possible, to enable comparison of COOPE prevalence between countries. Prospective study design using larger samples representative of broader sections of local population, collecting better data on both direct and indirect treatment costs is also needed.

Fission Activities of the Nuclear Reactions Group in Uppsala

NASA Astrophysics Data System (ADS)

Al-Adili, A.; Alhassan, E.; Gustavsson, C.; Helgesson, P.; Jansson, K.; Koning, A.; Lantz, M.; Mattera, A.; Prokofiev, A. V.; Rakopoulos, V.; Sjöstrand, H.; Solders, A.; Tarrío, D.; Österlund, M.; Pomp, S.

This paper highlights some of the main activities related to fission of the nuclear reactions group at Uppsala University. The group is involved for instance in fission yield experiments at the IGISOL facility, cross-section measurements at the NFS facility, as well as fission dynamics studies at the IRMM JRC-EC. Moreover, work is ongoing on the Total Monte Carlo (TMC) methodology and on including the GEF fission code into the TALYS nuclear reaction code. Selected results from these projects are discussed.

Neutron-induced fission cross-section measurement of 234U with quasi-monoenergetic beams in the keV and MeV range using micromegas detectors

NASA Astrophysics Data System (ADS)

Tsinganis, A.; Kokkoris, M.; Vlastou, R.; Kalamara, A.; Stamatopoulos, A.; Kanellakopoulos, A.; Lagoyannis, A.; Axiotis, M.

2017-09-01

Accurate data on neutron-induced fission cross-sections of actinides are essential for the design of advanced nuclear reactors based either on fast neutron spectra or alternative fuel cycles, as well as for the reduction of safety margins of existing and future conventional facilities. The fission cross-section of 234U was measured at incident neutron energies of 560 and 660 keV and 7.5 MeV with a setup based on `microbulk' Micromegas detectors and the same samples previously used for the measurement performed at the CERN n_TOF facility (Karadimos et al., 2014). The 235U fission cross-section was used as reference. The (quasi-)monoenergetic neutron beams were produced via the 7Li(p,n) and the 2H(d,n) reactions at the neutron beam facility of the Institute of Nuclear and Particle Physics at the `Demokritos' National Centre for Scientific Research. A detailed study of the neutron spectra produced in the targets and intercepted by the samples was performed coupling the NeuSDesc and MCNPX codes, taking into account the energy spread, energy loss and angular straggling of the beam ions in the target assemblies, as well as contributions from competing reactions and neutron scattering in the experimental setup. Auxiliary Monte-Carlo simulations were performed with the FLUKA code to study the behaviour of the detectors, focusing particularly on the reproduction of the pulse height spectra of α-particles and fission fragments (using distributions produced with the GEF code) for the evaluation of the detector efficiency. An overview of the developed methodology and preliminary results are presented.

Risk factors for asthma and allergy associated with urban migration: background and methodology of a cross-sectional study in Afro-Ecuadorian school children in Northeastern Ecuador (Esmeraldas-SCAALA Study).

PubMed

Cooper, Philip J; Chico, Martha E; Vaca, Maritza G; Rodriguez, Alejandro; Alcântara-Neves, Neuza M; Genser, Bernd; de Carvalho, Lain Pontes; Stein, Renato T; Cruz, Alvaro A; Rodrigues, Laura C; Barreto, Mauricio L

2006-09-13

Asthma and allergic diseases are becoming increasingly frequent in children in urban centres of Latin America although the prevalence of allergic disease is still low in rural areas. Understanding better why the prevalence of asthma is greater in urban migrant populations and the role of risk factors such as life style and environmental exposures, may be key to understand what is behind this trend. The Esmeraldas-SCAALA (Social Changes, Asthma and Allergy in Latin America) study consists of cross-sectional and nested case-control studies of school children in rural and urban areas of Esmeraldas Province in Ecuador. The cross-sectional study will investigate risk factors for atopy and allergic disease in rural and migrant urban Afro-Ecuadorian school children and the nested case-control study will examine environmental, biologic and social risk factors for asthma among asthma cases and non-asthmatic controls from the cross-sectional study. Data will be collected through standardised questionnaires, skin prick testing to relevant aeroallergen extracts, stool examinations for parasites, blood sampling (for measurement of IgE, interleukins and other immunological parameters), anthropometric measurements for assessment of nutritional status, exercise testing for assessment of exercise-induced bronchospasm and dust sampling for measurement of household endotoxin and allergen levels. The information will be used to identify the factors associated with an increased risk of asthma and allergies in migrant and urbanizing populations, to improve the understanding of the causes of the increase in asthma prevalence and to identify potentially modifiable factors to inform the design of prevention programmes to reduce the risk of allergy in urban populations in Latin America.

Risk factors for asthma and allergy associated with urban migration: background and methodology of a cross-sectional study in Afro-Ecuadorian school children in Northeastern Ecuador (Esmeraldas-SCAALA Study)

PubMed Central

Cooper, Philip J; Chico, Martha E; Vaca, Maritza G; Rodriguez, Alejandro; Alcântara-Neves, Neuza M; Genser, Bernd; de Carvalho, Lain Pontes; Stein, Renato T; Cruz, Alvaro A; Rodrigues, Laura C; Barreto, Mauricio L

2006-01-01

Background Asthma and allergic diseases are becoming increasingly frequent in children in urban centres of Latin America although the prevalence of allergic disease is still low in rural areas. Understanding better why the prevalence of asthma is greater in urban migrant populations and the role of risk factors such as life style and environmental exposures, may be key to understand what is behind this trend. Methods/design The Esmeraldas-SCAALA (Social Changes, Asthma and Allergy in Latin America) study consists of cross-sectional and nested case-control studies of school children in rural and urban areas of Esmeraldas Province in Ecuador. The cross-sectional study will investigate risk factors for atopy and allergic disease in rural and migrant urban Afro-Ecuadorian school children and the nested case-control study will examine environmental, biologic and social risk factors for asthma among asthma cases and non-asthmatic controls from the cross-sectional study. Data will be collected through standardised questionnaires, skin prick testing to relevant aeroallergen extracts, stool examinations for parasites, blood sampling (for measurement of IgE, interleukins and other immunological parameters), anthropometric measurements for assessment of nutritional status, exercise testing for assessment of exercise-induced bronchospasm and dust sampling for measurement of household endotoxin and allergen levels. Discussion The information will be used to identify the factors associated with an increased risk of asthma and allergies in migrant and urbanizing populations, to improve the understanding of the causes of the increase in asthma prevalence and to identify potentially modifiable factors to inform the design of prevention programmes to reduce the risk of allergy in urban populations in Latin America. PMID:16970809

Language barriers and qualitative nursing research: methodological considerations.

PubMed

Squires, A

2008-09-01

This review of the literature synthesizes methodological recommendations for the use of translators and interpreters in cross-language qualitative research. Cross-language qualitative research involves the use of interpreters and translators to mediate a language barrier between researchers and participants. Qualitative nurse researchers successfully address language barriers between themselves and their participants when they systematically plan for how they will use interpreters and translators throughout the research process. Experienced qualitative researchers recognize that translators can generate qualitative data through translation processes and by participating in data analysis. Failure to address language barriers and the methodological challenges they present threatens the credibility, transferability, dependability and confirmability of cross-language qualitative nursing research. Through a synthesis of the cross-language qualitative methods literature, this article reviews the basics of language competence, translator and interpreter qualifications, and roles for each kind of qualitative research approach. Methodological and ethical considerations are also provided. By systematically addressing the methodological challenges cross-language research presents, nurse researchers can produce better evidence for nursing practice and policy making when working across different language groups. Findings from qualitative studies will also accurately represent the experiences of the participants without concern that the meaning was lost in translation.

Language barriers and qualitative nursing research: methodological considerations

PubMed Central

Squires, A.

2009-01-01

Aim This review of the literature synthesizes methodological recommendations for the use of translators and interpreters in cross-language qualitative research. Background Cross-language qualitative research involves the use of interpreters and translators to mediate a language barrier between researchers and participants. Qualitative nurse researchers successfully address language barriers between themselves and their participants when they systematically plan for how they will use interpreters and translators throughout the research process. Experienced qualitative researchers recognize that translators can generate qualitative data through translation processes and by participating in data analysis. Failure to address language barriers and the methodological challenges they present threatens the credibility, transferability, dependability and confirmability of cross-language qualitative nursing research. Through a synthesis of the cross-language qualitative methods literature, this article reviews the basics of language competence, translator and interpreter qualifications, and roles for each kind of qualitative research approach. Methodological and ethical considerations are also provided. Conclusion By systematically addressing the methodological challenges cross-language research presents, nurse researchers can produce better evidence for nursing practice and policy making when working across different language groups. Findings from qualitative studies will also accurately represent the experiences of the participants without concern that the meaning was lost in translation. PMID:19522941

Cross-sectional neck response of a total human body FE model during simulated frontal and side automobile impacts.

PubMed

White, Nicholas A; Moreno, Daniel P; Gayzik, F Scott; Stitzel, Joel D

2015-01-01

Human body finite element (FE) models are beginning to play a more prevalent role in the advancement of automotive safety. A methodology has been developed to evaluate neck response at multiple levels in a human body FE model during simulated automotive impacts. Three different impact scenarios were simulated: a frontal impact of a belted driver with airbag deployment, a frontal impact of a belted passenger without airbag deployment and an unbelted side impact sled test. Cross sections were created at each vertebral level of the cervical spine to calculate the force and moment contributions of different anatomical components of the neck. Adjacent level axial force ratios varied between 0.74 and 1.11 and adjacent level bending moment ratios between 0.55 and 1.15. The present technique is ideal for comparing neck forces and moments to existing injury threshold values, calculating injury criteria and for better understanding the biomechanical mechanisms of neck injury and load sharing during sub-injurious and injurious loading.

Are renewable energy policies upsetting carbon dioxide emissions? The case of Latin America countries.

PubMed

Fuinhas, José Alberto; Marques, António Cardoso; Koengkan, Matheus

2017-06-01

The impact of renewable energy policies in carbon dioxide emissions was analysed for a panel of ten Latin American countries, for the period from 1991 to 2012. Panel autoregressive distributed lag methodology was used to decompose the total effect of renewable energy policies on carbon dioxide emissions in its short- and long-run components. There is evidence for the presence of cross-sectional dependence, confirming that Latin American countries share spatial patterns. Heteroskedasticity, contemporaneous correlation, and first-order autocorrelation cross-sectional dependence are also present. To cope with these phenomena, the robust dynamic Driscoll-Kraay estimator, with fixed effects, was used. It was confirmed that the primary energy consumption per capita, in both the short- and long-run, contributes to an increase in carbon dioxide emissions, and also that renewable energy policies in the long-run, and renewable electricity generation per capita both in the short- and long-run, help to mitigate per capita carbon dioxide emissions.

Media Effects in Youth Exposed to Terrorist Incidents: a Historical Perspective.

PubMed

Pfefferbaum, Betty; Tucker, Phebe; Pfefferbaum, Rose L; Nelson, Summer D; Nitiéma, Pascal; Newman, Elana

2018-03-05

This paper reviews the evidence on the relationship between contact with media coverage of terrorist incidents and psychological outcomes in children and adolescents while tracing the evolution in research methodology. Studies of recent events in the USA have moved from correlational cross-sectional studies examining primarily television coverage and posttraumatic stress reactions to longitudinal studies that address multiple media forms and a range of psychological outcomes including depression and anxiety. Studies of events in the USA-the 1995 Oklahoma City bombing, the September 11 attacks, and the 2013 Boston Marathon bombing-and elsewhere have used increasingly sophisticated research methods to document a relationship between contact with various media forms and adverse psychological outcomes in children with different event exposures. Although adverse outcomes are associated with reports of greater contact with terrorism coverage in cross-sectional studies, there is insufficient evidence at this time to assume a causal relationship. Additional research is needed to investigate a host of issues such as newer media forms, high-risk populations, and contextual factors.

Study on improving the turbidity measurement of the absolute coagulation rate constant.

PubMed

Sun, Zhiwei; Liu, Jie; Xu, Shenghua

2006-05-23

The existing theories dealing with the evaluation of the absolute coagulation rate constant by turbidity measurement were experimentally tested for different particle-sized (radius = a) suspensions at incident wavelengths (lambda) ranging from near-infrared to ultraviolet light. When the size parameter alpha = 2pi a/lambda > 3, the rate constant data from previous theories for fixed-sized particles show significant inconsistencies at different light wavelengths. We attribute this problem to the imperfection of these theories in describing the light scattering from doublets through their evaluation of the extinction cross section. The evaluations of the rate constants by all previous theories become untenable as the size parameter increases and therefore hampers the applicable range of the turbidity measurement. By using the T-matrix method, we present a robust solution for evaluating the extinction cross section of doublets formed in the aggregation. Our experiments show that this new approach is effective in extending the applicability range of the turbidity methodology and increasing measurement accuracy.

Some Dynamical Features of Molecular Fragmentation by Electrons and Swift Ions

NASA Astrophysics Data System (ADS)

Montenegro, E. C.; Sigaud, L.; Wolff, W.; Luna, H.; Natalia, Ferreira

To date, the large majority of studies on molecular fragmentation by swift charged particles have been carried out using simple molecules, for which reliable Potential Energy Curves are available to interpret the measured fragmentation yields. For complex molecules the scenario is quite different and such guidance is not available, obscuring even a simple organization of the data which are currently obtained for a large variety of molecules of biological or technological interest. In this work we show that a general and relatively simple methodology can be used to obtain a broader picture of the fragmentation pattern of an arbitrary molecule. The electronic ionization or excitation cross section of a given molecular orbital, which is the first part of the fragmentation process, can be well scaled by a simple and general procedure at high projectile velocities. The fragmentation fractions arising from each molecular orbital can then be achieved by matching the calculated ionization with the measured fragmentation cross sections. Examples for Oxygen, Chlorodifluoromethane and Pyrimidine molecules are presented.

Uncertainty Quantification Techniques of SCALE/TSUNAMI

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rearden, Bradley T; Mueller, Don

2011-01-01

The Standardized Computer Analysis for Licensing Evaluation (SCALE) code system developed at Oak Ridge National Laboratory (ORNL) includes Tools for Sensitivity and Uncertainty Analysis Methodology Implementation (TSUNAMI). The TSUNAMI code suite can quantify the predicted change in system responses, such as k{sub eff}, reactivity differences, or ratios of fluxes or reaction rates, due to changes in the energy-dependent, nuclide-reaction-specific cross-section data. Where uncertainties in the neutron cross-section data are available, the sensitivity of the system to the cross-section data can be applied to propagate the uncertainties in the cross-section data to an uncertainty in the system response. Uncertainty quantification ismore » useful for identifying potential sources of computational biases and highlighting parameters important to code validation. Traditional validation techniques often examine one or more average physical parameters to characterize a system and identify applicable benchmark experiments. However, with TSUNAMI correlation coefficients are developed by propagating the uncertainties in neutron cross-section data to uncertainties in the computed responses for experiments and safety applications through sensitivity coefficients. The bias in the experiments, as a function of their correlation coefficient with the intended application, is extrapolated to predict the bias and bias uncertainty in the application through trending analysis or generalized linear least squares techniques, often referred to as 'data adjustment.' Even with advanced tools to identify benchmark experiments, analysts occasionally find that the application models include some feature or material for which adequately similar benchmark experiments do not exist to support validation. For example, a criticality safety analyst may want to take credit for the presence of fission products in spent nuclear fuel. In such cases, analysts sometimes rely on 'expert judgment' to select an additional administrative margin to account for gap in the validation data or to conclude that the impact on the calculated bias and bias uncertainty is negligible. As a result of advances in computer programs and the evolution of cross-section covariance data, analysts can use the sensitivity and uncertainty analysis tools in the TSUNAMI codes to estimate the potential impact on the application-specific bias and bias uncertainty resulting from nuclides not represented in available benchmark experiments. This paper presents the application of methods described in a companion paper.« less

n+235U resonance parameters and neutron multiplicities in the energy region below 100 eV

NASA Astrophysics Data System (ADS)

Pigni, Marco T.; Capote, Roberto; Trkov, Andrej; Pronyaev, Vladimir G.

2017-09-01

In August 2016, following the recent effort within the Collaborative International Evaluated Library Organization (CIELO) pilot project to improve the neutron cross sections of 235U, Oak Ridge National Laboratory (ORNL) collaborated with the International Atomic Energy Agency (IAEA) to release a resonance parameter evaluation. This evaluation restores the performance of the evaluated cross sections for the thermal- and above-thermal-solution benchmarks on the basis of newly evaluated thermal neutron constants (TNCs) and thermal prompt fission neutron spectra (PFNS). Performed with support from the US Nuclear Criticality Safety Program (NCSP) in an effort to provide the highest fidelity general purpose nuclear database for nuclear criticality applications, the resonance parameter evaluation was submitted as an ENDF-compatible file to be part of the next release of the ENDF/B-VIII.0 nuclear data library. The resonance parameter evaluation methodology used the Reich-Moore approximation of the R-matrix formalism implemented in the code SAMMY to fit the available time-of-flight (TOF) measured data for the thermal induced cross section of n+235U up to 100 eV. While maintaining reasonably good agreement with the experimental data, the validation analysis focused on restoring the benchmark performance for 235U solutions by combining changes to the resonance parameters and to the prompt resonance v̅

Improvement of Modeling HTGR Neutron Physics by Uncertainty Analysis with the Use of Cross-Section Covariance Information

NASA Astrophysics Data System (ADS)

Boyarinov, V. F.; Grol, A. V.; Fomichenko, P. A.; Ternovykh, M. Yu

2017-01-01

This work is aimed at improvement of HTGR neutron physics design calculations by application of uncertainty analysis with the use of cross-section covariance information. Methodology and codes for preparation of multigroup libraries of covariance information for individual isotopes from the basic 44-group library of SCALE-6 code system were developed. A 69-group library of covariance information in a special format for main isotopes and elements typical for high temperature gas cooled reactors (HTGR) was generated. This library can be used for estimation of uncertainties, associated with nuclear data, in analysis of HTGR neutron physics with design codes. As an example, calculations of one-group cross-section uncertainties for fission and capture reactions for main isotopes of the MHTGR-350 benchmark, as well as uncertainties of the multiplication factor (k∞) for the MHTGR-350 fuel compact cell model and fuel block model were performed. These uncertainties were estimated by the developed technology with the use of WIMS-D code and modules of SCALE-6 code system, namely, by TSUNAMI, KENO-VI and SAMS. Eight most important reactions on isotopes for MHTGR-350 benchmark were identified, namely: 10B(capt), 238U(n,γ), ν5, 235U(n,γ), 238U(el), natC(el), 235U(fiss)-235U(n,γ), 235U(fiss).

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wieselquist, William A.

SCALE’s general depletion, activation, and spent fuel source terms analysis capabilities are enabled through a family of modules related to the main ORIGEN depletion/irradiation/decay solver. The nuclide tracking in ORIGEN is based on the principle of explicitly modeling all available nuclides and transitions in the current fundamental nuclear data for decay and neutron-induced transmutation and relies on fundamental cross section and decay data in ENDF/B VII. Cross section data for materials and reaction processes not available in ENDF/B-VII are obtained from the JEFF-3.0/A special purpose European activation library containing 774 materials and 23 reaction channels with 12,617 neutron-induced reactions belowmore » 20 MeV. Resonance cross section corrections in the resolved and unresolved range are performed using a continuous-energy treatment by data modules in SCALE. All nuclear decay data, fission product yields, and gamma-ray emission data are developed from ENDF/B-VII.1 evaluations. Decay data include all ground and metastable state nuclides with half-lives greater than 1 millisecond. Using these data sources, ORIGEN currently tracks 174 actinides, 1149 fission products, and 974 activation products. The purpose of this chapter is to describe the stand-alone capabilities and underlying methodology of ORIGEN—as opposed to the integrated depletion capability it provides in all coupled neutron transport/depletion sequences in SCALE, as described in other chapters.« less

ICS-II USA research design and methodology.

PubMed

Rana, H; Andersen, R M; Nakazono, T T; Davidson, P L

1997-05-01

The purpose of the WHO-sponsored International Collaborative Study of Oral Health Outcomes (ICS-II) was to provide policy-markers and researchers with detailed, reliable, and valid data on the oral health situation in their countries or regions, together with comparative data from other dental care delivery systems. ICS-II used a cross-sectional design with no explicit control groups or experimental interventions. A standardized methodology was developed and tested for collecting and analyzing epidemiological, sociocultural, economic, and delivery system data. Respondent information was obtained by household interviews, and clinical examinations were conducted by calibrated oral epidemiologists. Discussed are the sampling design characteristics for the USA research locations, response rates, samples size for interview and oral examination data, weighting procedures, and statistical methods. SUDAAN was used to adjust variance calculations, since complex sampling designs were used.

Perturbed effects at radiation physics

NASA Astrophysics Data System (ADS)

Külahcı, Fatih; Şen, Zekâi

2013-09-01

Perturbation methodology is applied in order to assess the linear attenuation coefficient, mass attenuation coefficient and cross-section behavior with random components in the basic variables such as the radiation amounts frequently used in the radiation physics and chemistry. Additionally, layer attenuation coefficient (LAC) and perturbed LAC (PLAC) are proposed for different contact materials. Perturbation methodology provides opportunity to obtain results with random deviations from the average behavior of each variable that enters the whole mathematical expression. The basic photon intensity variation expression as the inverse exponential power law (as Beer-Lambert's law) is adopted for perturbation method exposition. Perturbed results are presented not only in terms of the mean but additionally the standard deviation and the correlation coefficients. Such perturbation expressions provide one to assess small random variability in basic variables.

Optimization of coupled multiphysics methodology for safety analysis of pebble bed modular reactor

NASA Astrophysics Data System (ADS)

Mkhabela, Peter Tshepo

The research conducted within the framework of this PhD thesis is devoted to the high-fidelity multi-physics (based on neutronics/thermal-hydraulics coupling) analysis of Pebble Bed Modular Reactor (PBMR), which is a High Temperature Reactor (HTR). The Next Generation Nuclear Plant (NGNP) will be a HTR design. The core design and safety analysis methods are considerably less developed and mature for HTR analysis than those currently used for Light Water Reactors (LWRs). Compared to LWRs, the HTR transient analysis is more demanding since it requires proper treatment of both slower and much longer transients (of time scale in hours and days) and fast and short transients (of time scale in minutes and seconds). There is limited operation and experimental data available for HTRs for validation of coupled multi-physics methodologies. This PhD work developed and verified reliable high fidelity coupled multi-physics models subsequently implemented in robust, efficient, and accurate computational tools to analyse the neutronics and thermal-hydraulic behaviour for design optimization and safety evaluation of PBMR concept The study provided a contribution to a greater accuracy of neutronics calculations by including the feedback from thermal hydraulics driven temperature calculation and various multi-physics effects that can influence it. Consideration of the feedback due to the influence of leakage was taken into account by development and implementation of improved buckling feedback models. Modifications were made in the calculation procedure to ensure that the xenon depletion models were accurate for proper interpolation from cross section tables. To achieve this, the NEM/THERMIX coupled code system was developed to create the system that is efficient and stable over the duration of transient calculations that last over several tens of hours. Another achievement of the PhD thesis was development and demonstration of full-physics, three-dimensional safety analysis methodology for the PBMR to provide reference solutions. Investigation of different aspects of the coupled methodology and development of efficient kinetics treatment for the PBMR were carried out, which accounts for all feedback phenomena in an efficient manner. The OECD/NEA PBMR-400 coupled code benchmark was used as a test matrix for the proposed investigations. The integrated thermal-hydraulics and neutronics (multi-physics) methods were extended to enable modeling of a wider range of transients pertinent to the PBMR. First, the effect of the spatial mapping schemes (spatial coupling) was studied and quantified for different types of transients, which resulted in implementation of improved mapping methodology based on user defined criteria. The second aspect that was studied and optimized is the temporal coupling and meshing schemes between the neutronics and thermal-hydraulics time step selection algorithms. The coupled code convergence was achieved supplemented by application of methods to accelerate it. Finally, the modeling of all feedback phenomena in PBMRs was investigated and a novel treatment of cross-section dependencies was introduced for improving the representation of cross-section variations. The added benefit was that in the process of studying and improving the coupled multi-physics methodology more insight was gained into the physics and dynamics of PBMR, which will help also to optimize the PBMR design and improve its safety. One unique contribution of the PhD research is the investigation of the importance of the correct representation of the three-dimensional (3-D) effects in the PBMR analysis. The performed studies demonstrated that explicit 3-D modeling of control rod movement is superior and removes the errors associated with the grey curtain (2-D homogenized) approximation.

Revisions to Conventional Clock Domain Crossing Methodologies in Triple Modular Redundant Circuits

NASA Technical Reports Server (NTRS)

Berg, Melanie D.; LaBel, Kenneth A.

2018-01-01

We present updates to the conventional methodology of triple modular redundancy (TMR) insertion as it pertains to clock domain crossings (CDCs). Three types of TMR schemes and their suggested corresponding CDC revisions are discussed.

The Cl + O3 reaction: a detailed QCT simulation of molecular beam experiments.

PubMed

Menéndez, M; Castillo, J F; Martínez-Haya, B; Aoiz, F J

2015-10-14

We have studied in detail the dynamics of the Cl + O3 reaction in the 1-56 kcal mol(-1) collision energy range using quasi-classical trajectory (QCT) calculations on a recent potential energy surface (PES) [J. F. Castillo et al., Phys. Chem. Chem. Phys., 2011, 13, 8537]. The main goal of this work has been to assess the accuracy of the PES and the reliability of the QCT method by comparison with the existing crossed molecular beam results [J. Zhang and Y. T. Lee J. Phys. Chem. A, 1997, 101, 6485]. For this purpose, we have developed a methodology that allows us to determine the experimental observables in crossed molecular beam experiments (integral and differential cross sections, recoil velocity distributions, scattering angle-recoil velocity polar maps, etc.) as continuous functions of the collision energy. Using these distributions, raw experimental data in the laboratory frame (angular distributions and time-of-flight spectra) have been simulated from first principles with the sole information on the instrumental parameters and taking into account the energy spread. A general good agreement with the experimental data has been found, thereby demonstrating the adequacy of the QCT method and the quality of the PES to describe the dynamics of this reaction at the level of resolution of the existing crossed beam experiments. Some features which are apparent in the differential cross sections have also been analysed in terms of the dynamics of the reaction and its evolution with the collision energy.

Socio-economic inequalities in health services utilization: a cross-sectional study.

PubMed

Ranjbar Ezzatabadi, Mohammad; Khosravi, Ameneh; Bahrami, Mohammad Amin; Rafiei, Sima

2018-02-12

Purpose Developing country workers mainly face important challenges when examining equality in health services utilization among the population and identifying influential factors. The purpose of this paper us to: understand health service use among households with different socio-economic status in Isfahan province; and to investigate probable inequality determinants in service utilization. Design/methodology/approach Almost 1,040 households living in Isfahan province participated in this cross-sectional study in 2013. Data were collected by a questionnaire with three sections: demographic characteristics; socio-economic status; and health services utilization. The concentration index was applied to measure inequality. Analysts used STATA 11. Findings Economic status, educational level, insurance coverage and household gender were the most influential factors on health services utilization. Those with a high socio-economic level were more likely to demand and use such services; although self-medication patterns showed an opposite trend. Practical implications Female-headed families face with more difficulties in access to basic human needs including health. Supportive policies are needed to meet their demands. Originality/value The authors used principle component analysis to assess households' economic situation, which reduced the variables into a single index.

The role of pragmatism in explaining heterogeneity in meta-analyses of randomised trials: a protocol for a cross-sectional methodological review.

PubMed

Aves, Theresa; Allan, Katherine S; Lawson, Daeria; Nieuwlaat, Robby; Beyene, Joseph; Mbuagbaw, Lawrence

2017-09-03

There has been increasing interest in pragmatic trials methodology. As a result, tools such as the Pragmatic-Explanatory Continuum Indicator Summary-2 (PRECIS-2) are being used prospectively to help researchers design randomised controlled trials (RCTs) within the pragmatic-explanatory continuum. There may be value in applying the PRECIS-2 tool retrospectively in a systematic review setting as it could provide important information about how to pool data based on the degree of pragmatism. To investigate the role of pragmatism as a source of heterogeneity in systematic reviews by (1) identifying systematic reviews with meta-analyses of RCTs that have moderate to high heterogeneity, (2) applying PRECIS-2 to RCTs of systematic reviews, (3) evaluating the inter-rater reliability of PRECIS-2, (4) determining how much of this heterogeneity may be explained by pragmatism. A cross-sectional methodological review will be conducted on systematic reviews of RCTs published in the Cochrane Library from 1 January 2014 to 1 January 2017. Included systematic reviews will have a minimum of 10 RCTs in the meta-analysis of the primary outcome and moderate to substantial heterogeneity (I 2 ≥50%). Of the eligible systematic reviews, a random selection of 10 will be included for quantitative evaluation. In each systematic review, RCTs will be scored using the PRECIS-2 tool, in duplicate. Agreement between raters will be measured using the intraclass correlation coefficient. Subgroup analyses and meta-regression will be used to evaluate how much variability in the primary outcome may be due to pragmatism. This review will be among the first to evaluate the PRECIS-2 tool in a systematic review setting. Results from this research will provide inter-rater reliability information about PRECIS-2 and may be used to provide methodological guidance when dealing with pragmatism in systematic reviews and subgroup considerations. On completion, this review will be submitted to a peer-reviewed journal for publication. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

a Time-Dependent Many-Electron Approach to Atomic and Molecular Interactions

NASA Astrophysics Data System (ADS)

Runge, Keith

A new methodology is developed for the description of electronic rearrangement in atomic and molecular collisions. Using the eikonal representation of the total wavefunction, time -dependent equations are derived for the electronic densities within the time-dependent Hartree-Fock approximation. An averaged effective potential which ensures time reversal invariance is used to describe the effect of the fast electronic transitions on the slower nuclear motions. Electron translation factors (ETF) are introduced to eliminate spurious asymptotic couplings, and a local ETF is incorporated into a basis of traveling atomic orbitals. A reference density is used to describe local electronic relaxation and to account for the time propagation of fast and slow motions, and is shown to lead to an efficient integration scheme. Expressions for time-dependent electronic populations and polarization parameters are given. Electronic integrals over Gaussians including ETFs are derived to extend electronic state calculations to dynamical phenomena. Results of the method are in good agreement with experimental data for charge transfer integral cross sections over a projectile energy range of three orders of magnitude in the proton-Hydrogen atom system. The more demanding calculations of integral alignment, state-to-state integral cross sections, and differential cross sections are found to agree well with experimental data provided care is taken to include ETFs in the calculation of electronic integrals and to choose the appropriate effective potential. The method is found to be in good agreement with experimental data for the calculation of charge transfer integral cross sections and state-to-state integral cross sections in the one-electron heteronuclear Helium(2+)-Hydrogen atom system and in the two-electron system, Hydrogen atom-Hydrogen atom. Time-dependent electronic populations are seen to oscillate rapidly in the midst of collision event. In particular, multiple exchanges of the electron are seen to occur in the proton-Hydrogen atom system at low collision energies. The concepts and results derived from the approach provide new insight into the dynamics of nuclear screening and electronic rearrangement in atomic collisions.

On-the-Fly Generation of Differential Resonance Scattering Probability Distribution Functions for Monte Carlo Codes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Davidson, Eva E.; Martin, William R.

Current Monte Carlo codes use one of three models: (1) the asymptotic scattering model, (2) the free gas scattering model, or (3) the S(α,β) model, depending on the neutron energy and the specific Monte Carlo code. This thesis addresses the consequences of using the free gas scattering model, which assumes that the neutron interacts with atoms in thermal motion in a monatomic gas in thermal equilibrium at material temperature, T. Most importantly, the free gas model assumes the scattering cross section is constant over the neutron energy range, which is usually a good approximation for light nuclei, but not formore » heavy nuclei where the scattering cross section may have several resonances in the epithermal region. Several researchers in the field have shown that the exact resonance scattering model is temperaturedependent, and neglecting the resonances in the lower epithermal range can under-predict resonance absorption due to the upscattering phenomenon mentioned above, leading to an over-prediction of keff by several hundred pcm. Existing methods to address this issue involve changing the neutron weights or implementing an extra rejection scheme in the free gas sampling scheme, and these all involve performing the collision analysis in the center-of-mass frame, followed by a conversion back to the laboratory frame to continue the random walk of the neutron. The goal of this paper was to develop a sampling methodology that (1) accounted for the energydependent scattering cross sections in the collision analysis and (2) was performed in the laboratory frame,avoiding the conversion to the center-of-mass frame. The energy dependence of the scattering cross section was modeled with even-ordered polynomials (2nd and 4th order) to approximate the scattering cross section in Blackshaw’s equations for the moments of the differential scattering PDFs. These moments were used to sample the outgoing neutron speed and angle in the laboratory frame on-the-fly during the random walk of the neutron. Results for criticality studies on fuel pin and fuel assembly calculations using methods developed in this dissertation showed very close comparison to results using the reference Dopplerbroadened rejection correction (DBRC) scheme.« less

On-the-Fly Generation of Differential Resonance Scattering Probability Distribution Functions for Monte Carlo Codes

DOE PAGES

Davidson, Eva E.; Martin, William R.

2017-05-26

Current Monte Carlo codes use one of three models: (1) the asymptotic scattering model, (2) the free gas scattering model, or (3) the S(α,β) model, depending on the neutron energy and the specific Monte Carlo code. This thesis addresses the consequences of using the free gas scattering model, which assumes that the neutron interacts with atoms in thermal motion in a monatomic gas in thermal equilibrium at material temperature, T. Most importantly, the free gas model assumes the scattering cross section is constant over the neutron energy range, which is usually a good approximation for light nuclei, but not formore » heavy nuclei where the scattering cross section may have several resonances in the epithermal region. Several researchers in the field have shown that the exact resonance scattering model is temperaturedependent, and neglecting the resonances in the lower epithermal range can under-predict resonance absorption due to the upscattering phenomenon mentioned above, leading to an over-prediction of keff by several hundred pcm. Existing methods to address this issue involve changing the neutron weights or implementing an extra rejection scheme in the free gas sampling scheme, and these all involve performing the collision analysis in the center-of-mass frame, followed by a conversion back to the laboratory frame to continue the random walk of the neutron. The goal of this paper was to develop a sampling methodology that (1) accounted for the energydependent scattering cross sections in the collision analysis and (2) was performed in the laboratory frame,avoiding the conversion to the center-of-mass frame. The energy dependence of the scattering cross section was modeled with even-ordered polynomials (2nd and 4th order) to approximate the scattering cross section in Blackshaw’s equations for the moments of the differential scattering PDFs. These moments were used to sample the outgoing neutron speed and angle in the laboratory frame on-the-fly during the random walk of the neutron. Results for criticality studies on fuel pin and fuel assembly calculations using methods developed in this dissertation showed very close comparison to results using the reference Dopplerbroadened rejection correction (DBRC) scheme.« less

A Proven Methodology for Developing Secure Software and Applying It to Ground Systems

NASA Technical Reports Server (NTRS)

Bailey, Brandon

2016-01-01

Part Two expands upon Part One in an attempt to translate the methodology for ground system personnel. The goal is to build upon the methodology presented in Part One by showing examples and details on how to implement the methodology. Section 1: Ground Systems Overview; Section 2: Secure Software Development; Section 3: Defense in Depth for Ground Systems; Section 4: What Now?

Crowding measures associated with the quality of emergency department care: a systematic review.

PubMed

Stang, Antonia S; Crotts, Jennifer; Johnson, David W; Hartling, Lisa; Guttmann, Astrid

2015-06-01

Despite the substantial body of literature on emergency department (ED) crowding, to the best of our knowledge, there is no agreement on the measure or measures that should be used to quantify crowding. The objective of this systematic review was to identify existing measures of ED crowding that have been linked to quality of care as defined by the Institute of Medicine (IOM) quality domains (safe, effective, patient-centered, efficient, timely, and equitable). Six major bibliographic databases were searched from January 1980 to January 2012, and hand searches were conducted of relevant journals and conference proceedings. Observational studies (cross-sectional, cohort, and case-control), quality improvement studies, quasi-experimental (e.g., before/after) studies, and randomized controlled trials were considered for inclusion. Studies that did not provide measures of ED crowding were excluded. Studies that did not provide quantitative data on the link between crowding measures and quality of care were also excluded. Two independent reviewers assessed study eligibility, completed data extraction, and assessed study quality using the Newcastle-Ottawa Quality Assessment Scale (NOS) for observational studies and a modified version of the NOS for cross-sectional studies. The search identified 7,413 articles. Thirty-two articles were included in the review: six cross-sectional, one case-control, 23 cohort, and two retrospective reviews of performance improvement data. Methodologic quality was moderate, with weaknesses in the reporting of study design and methodology. Overall, 15 of the crowding measures studied had quantifiable links to quality of care. The three measures most frequently linked to quality of care were the number of patients in the waiting room, ED occupancy (percentage of overall ED beds filled), and the number of admitted patients in the ED awaiting inpatient beds. None of the articles provided data on the link between crowding measures and the IOM domains reflecting equitable and efficient care. The results of this review provide data on the association between ED crowding measures and quality of care. Three simple crowding measures have been linked to quality of care in multiple publications. © 2015 by the Society for Academic Emergency Medicine.

San Joaquin, California, High-Speed Rail Grade Crossing Data Acquisition Characteristics, Methodology, and Risk Assessment

DOT National Transportation Integrated Search

2006-11-01

This report discusses data acquisition and analysis for grade crossing risk analysis at the proposed San Joaquin High-Speed Rail Corridor in San Joaquin, California, and documents the data acquisition and analysis methodologies used to collect and an...

Methodological quality of systematic reviews on treatments for depression: a cross-sectional study.

PubMed

Chung, V C H; Wu, X Y; Feng, Y; Ho, R S T; Wong, S Y S; Threapleton, D

2017-05-02

Depression is one of the most common mental disorders and identifying effective treatment strategies is crucial for the control of depression. Well-conducted systematic reviews (SRs) and meta-analyses can provide the best evidence for supporting treatment decision-making. Nevertheless, the trustworthiness of conclusions can be limited by lack of methodological rigour. This study aims to assess the methodological quality of a representative sample of SRs on depression treatments. A cross-sectional study on the bibliographical and methodological characteristics of SRs published on depression treatments trials was conducted. Two electronic databases (the Cochrane Database of Systematic Reviews and the Database of Abstracts of Reviews of Effects) were searched for potential SRs. SRs with at least one meta-analysis on the effects of depression treatments were considered eligible. The methodological quality of included SRs was assessed using the validated AMSTAR (Assessing the Methodological Quality of Systematic Reviews) tool. The associations between bibliographical characteristics and scoring on AMSTAR items were analysed using logistic regression analysis. A total of 358 SRs were included and appraised. Over half of included SRs (n = 195) focused on non-pharmacological treatments and harms were reported in 45.5% (n = 163) of all studies. Studies varied in methods and reporting practices: only 112 (31.3%) took the risk of bias among primary studies into account when formulating conclusions; 245 (68.4%) did not fully declare conflict of interests; 93 (26.0%) reported an 'a priori' design and 104 (29.1%) provided lists of both included and excluded studies. Results from regression analyses showed: more recent publications were more likely to report 'a priori' designs [adjusted odds ratio (AOR) 1.31, 95% confidence interval (CI) 1.09-1.57], to describe study characteristics fully (AOR 1.16, 95% CI 1.06-1.28), and to assess presence of publication bias (AOR 1.13, 95% CI 1.06-1.19), but were less likely to list both included and excluded studies (AOR 0.86, 95% CI 0.81-0.92). SRs published in journals with higher impact factor (AOR 1.14, 95% CI 1.04-1.25), completed by more review authors (AOR 1.12, 95% CI 1.01-1.24) and SRs on non-pharmacological treatments (AOR 1.62, 95% CI 1.01-2.59) were associated with better performance in publication bias assessment. The methodological quality of included SRs is disappointing. Future SRs should strive to improve rigour by considering of risk of bias when formulating conclusions, reporting conflict of interests and authors should explicitly describe harms. SR authors should also use appropriate methods to combine the results, prevent language and publication biases, and ensure timely updates.

Newcomer adjustment during organizational socialization: a meta-analytic review of antecedents, outcomes, and methods.

PubMed

Bauer, Talya N; Bodner, Todd; Erdogan, Berrin; Truxillo, Donald M; Tucker, Jennifer S

2007-05-01

The authors tested a model of antecedents and outcomes of newcomer adjustment using 70 unique samples of newcomers with meta-analytic and path modeling techniques. Specifically, they proposed and tested a model in which adjustment (role clarity, self-efficacy, and social acceptance) mediated the effects of organizational socialization tactics and information seeking on socialization outcomes (job satisfaction, organizational commitment, job performance, intentions to remain, and turnover). The results generally supported this model. In addition, the authors examined the moderating effects of methodology on these relationships by coding for 3 methodological issues: data collection type (longitudinal vs. cross-sectional), sample characteristics (school-to-work vs. work-to-work transitions), and measurement of the antecedents (facet vs. composite measurement). Discussion focuses on the implications of the findings and suggestions for future research. 2007 APA, all rights reserved

Infants' development of object permanence: a refined methodology and new evidence of Piaget's hypothesized ordinality.

PubMed

Kramer, J A; Hill, K T; Cohen, L B

1975-03-01

To investigate Piaget's theory of object concept development, a series of 6 tasks was administered in a combined longitudinal/cross-sectional design incorporating a number of methodological controls. The tasks spanned the entire sensorimotor period and included single versus sequential displacements combined with visible or invisible hidings. 36 infants from 5 to 32 months of age at initial testing were drawn equally from day-care and home settings. All infants received the 6 tasks during each of 3 testing sessions over a 6-month period. Clear evidence was obtained for task ordinality as proposed by Piaget, with ordinality coefficients ranging from .71 to .82 for the 3 testing sessions. Performance changes across the 3 sessions were also ordinal in 80% of the cases. Expected age, task, and session effects and accompanying interactions were also obtained.

A methodological analysis of chaplaincy research: 2000-2009.

PubMed

Galek, Kathleen; Flannelly, Kevin J; Jankowski, Katherine R B; Handzo, George F

2011-01-01

The present article presents a comprehensive review and analysis of quantitative research conducted in the United States on chaplaincy and closely related topics published between 2000 and 2009. A combined search strategy identified 49 quantitative studies in 13 journals. The analysis focuses on the methodological sophistication of the studies, compared to earlier research on chaplaincy and pastoral care. Cross-sectional surveys of convenience samples still dominate the field, but sample sizes have increased somewhat over the past three decades. Reporting of the validity and reliability of measures continues to be low, although reporting of response rates has improved. Improvements in the use of inferential statistics and statistical controls were also observed, compared to previous research. The authors conclude that more experimental research is needed on chaplaincy, along with an increased use of hypothesis testing, regardless of the research designs that are used.

HIV Risks, Testing, and Treatment in the Former Soviet Union: Challenges and Future Directions in Research and Methodology.

PubMed

Saadat, Victoria M

2015-01-01

The dissolution of the USSR resulted in independence for constituent republics but left them battling an unstable economic environment and healthcare. Increases in injection drug use, prostitution, and migration were all widespread responses to this transition and have contributed to the emergence of an HIV epidemic in the countries of former Soviet Union. Researchers have begun to identify the risks of HIV infection as well as the barriers to HIV testing and treatment in the former Soviet Union. Significant methodological challenges have arisen and need to be addressed. The objective of this review is to determine common threads in HIV research in the former Soviet Union and provide useful recommendations for future research studies. In this systematic review of the literature, Pubmed was searched for English-language studies using the key search terms "HIV", "AIDS", "human immunodeficiency virus", "acquired immune deficiency syndrome", "Central Asia", "Kazakhstan", "Kyrgyzstan", "Uzbekistan", "Tajikistan", "Turkmenistan", "Russia", "Ukraine", "Armenia", "Azerbaijan", and "Georgia". Studies were evaluated against eligibility criteria for inclusion. Thirty-nine studies were identified across the two main topic areas of HIV risk and barriers to testing and treatment, themes subsequently referred to as "risk" and "barriers". Study design was predominantly cross-sectional. The most frequently used sampling methods were peer-to-peer and non-probabilistic sampling. The most frequently reported risks were condom misuse, risky intercourse, and unsafe practices among injection drug users. Common barriers to testing included that testing was inconvenient, and that results would not remain confidential. Frequent barriers to treatment were based on a distrust in the treatment system. The findings of this review reveal methodological limitations that span the existing studies. Small sample size, cross-sectional design, and non-probabilistic sampling methods were frequently reported limitations. Future work is needed to examine barriers to testing and treatment as well as longitudinal studies on HIV risk over time in most-at-risk populations.

A New Equivalence Theory Method for Treating Doubly Heterogeneous Fuel - I. Theory

DOE PAGES

Williams, Mark L.; Lee, Deokjung; Choi, Sooyoung

2015-03-04

A new methodology has been developed to treat resonance self-shielding in doubly heterogeneous very high temperature gas-cooled reactor systems in which the fuel compact region of a reactor lattice consists of small fuel grains dispersed in a graphite matrix. This new method first homogenizes the fuel grain and matrix materials using an analytically derived disadvantage factor from a two-region problem with equivalence theory and intermediate resonance method. This disadvantage factor accounts for spatial self-shielding effects inside each grain within the framework of an infinite array of grains. Then the homogenized fuel compact is self-shielded using a Bondarenko method to accountmore » for interactions between the fuel compact regions in the fuel lattice. In the final form of the equations for actual implementations, the double-heterogeneity effects are accounted for by simply using a modified definition of a background cross section, which includes geometry parameters and cross sections for both the grain and fuel compact regions. With the new method, the doubly heterogeneous resonance self-shielding effect can be treated easily even with legacy codes programmed only for a singly heterogeneous system by simple modifications in the background cross section for resonance integral interpolations. This paper presents a detailed derivation of the new method and a sensitivity study of double-heterogeneity parameters introduced during the derivation. The implementation of the method and verification results for various test cases are presented in the companion paper.« less

DESIGN CHARACTERISTICS OF THE IDAHO NATIONAL LABORATORY HIGH-TEMPERATURE GAS-COOLED TEST REACTOR

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sterbentz, James; Bayless, Paul; Strydom, Gerhard

2016-11-01

Uncertainty and sensitivity analysis is an indispensable element of any substantial attempt in reactor simulation validation. The quantification of uncertainties in nuclear engineering has grown more important and the IAEA Coordinated Research Program (CRP) on High-Temperature Gas Cooled Reactor (HTGR) initiated in 2012 aims to investigate the various uncertainty quantification methodologies for this type of reactors. The first phase of the CRP is dedicated to the estimation of cell and lattice model uncertainties due to the neutron cross sections co-variances. Phase II is oriented towards the investigation of propagated uncertainties from the lattice to the coupled neutronics/thermal hydraulics core calculations.more » Nominal results for the prismatic single block (Ex.I-2a) and super cell models (Ex.I-2c) have been obtained using the SCALE 6.1.3 two-dimensional lattice code NEWT coupled to the TRITON sequence for cross section generation. In this work, the TRITON/NEWT-flux-weighted cross sections obtained for Ex.I-2a and various models of Ex.I-2c is utilized to perform a sensitivity analysis of the MHTGR-350 core power densities and eigenvalues. The core solutions are obtained with the INL coupled code PHISICS/RELAP5-3D, utilizing a fixed-temperature feedback for Ex. II-1a.. It is observed that the core power density does not vary significantly in shape, but the magnitude of these variations increases as the moderator-to-fuel ratio increases in the super cell lattice models.« less

Combined effects of interaction between physical activity and nutrition on bone health in children and adolescents: a systematic review.

PubMed

Julián-Almárcegui, C; Gómez-Cabello, A; Huybrechts, I; González-Agüero, A; Kaufman, J M; Casajús, J A; Vicente-Rodríguez, G

2015-03-01

Osteoporosis is a major public health concern worldwide. Understanding the roles of diet and physical activity in ensuring adequate bone mass accrual during childhood and adolescence may help identify strategies to reduce the risk of osteoporotic fractures later in life. The present systematic review was conducted to provide an overview of the current knowledge of the combined effects of physical activity and diet on bone mass accrual in children and adolescents. Data were obtained via searches of the PubMed, EMBASE, SPORTDiscus, and ISI Web of Science databases. Studies published in English and Spanish between 1887 and August 2013 were eligible for inclusion. Two investigators evaluated the studies against the inclusion and exclusion criteria. A total of 14 studies (7 cross-sectional and 7 experimental) were included in the review. The Pedro score and the Black and Down's checklist were used to evaluate the methodological quality of the experimental and the cross-sectional studies, respectively. Study characteristics were summarized in accordance with the review's PICO criteria. Significant exercise-by-calcium interaction was detected at several different bone sites. Although the results of cross-sectional studies were inconsistent, the results of randomized controlled trials showed that exercise has the potential to improve bone health under conditions of adequate calcium intake. © The Author(s) 2015. Published by Oxford University Press on behalf of the International Life Sciences Institute. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

Coupled multi-group neutron photon transport for the simulation of high-resolution gamma-ray spectroscopy applications

NASA Astrophysics Data System (ADS)

Burns, Kimberly Ann

The accurate and efficient simulation of coupled neutron-photon problems is necessary for several important radiation detection applications. Examples include the detection of nuclear threats concealed in cargo containers and prompt gamma neutron activation analysis for nondestructive determination of elemental composition of unknown samples. In these applications, high-resolution gamma-ray spectrometers are used to preserve as much information as possible about the emitted photon flux, which consists of both continuum and characteristic gamma rays with discrete energies. Monte Carlo transport is the most commonly used modeling tool for this type of problem, but computational times for many problems can be prohibitive. This work explores the use of coupled Monte Carlo-deterministic methods for the simulation of neutron-induced photons for high-resolution gamma-ray spectroscopy applications. RAdiation Detection Scenario Analysis Toolbox (RADSAT), a code which couples deterministic and Monte Carlo transport to perform radiation detection scenario analysis in three dimensions [1], was used as the building block for the methods derived in this work. RADSAT was capable of performing coupled deterministic-Monte Carlo simulations for gamma-only and neutron-only problems. The purpose of this work was to develop the methodology necessary to perform coupled neutron-photon calculations and add this capability to RADSAT. Performing coupled neutron-photon calculations requires four main steps: the deterministic neutron transport calculation, the neutron-induced photon spectrum calculation, the deterministic photon transport calculation, and the Monte Carlo detector response calculation. The necessary requirements for each of these steps were determined. A major challenge in utilizing multigroup deterministic transport methods for neutron-photon problems was maintaining the discrete neutron-induced photon signatures throughout the simulation. Existing coupled neutron-photon cross-section libraries and the methods used to produce neutron-induced photons were unsuitable for high-resolution gamma-ray spectroscopy applications. Central to this work was the development of a method for generating multigroup neutron-photon cross-sections in a way that separates the discrete and continuum photon emissions so the neutron-induced photon signatures were preserved. The RADSAT-NG cross-section library was developed as a specialized multigroup neutron-photon cross-section set for the simulation of high-resolution gamma-ray spectroscopy applications. The methodology and cross sections were tested using code-to-code comparison with MCNP5 [2] and NJOY [3]. A simple benchmark geometry was used for all cases compared with MCNP. The geometry consists of a cubical sample with a 252Cf neutron source on one side and a HPGe gamma-ray spectrometer on the opposing side. Different materials were examined in the cubical sample: polyethylene (C2H4), P, N, O, and Fe. The cross sections for each of the materials were compared to cross sections collapsed using NJOY. Comparisons of the volume-averaged neutron flux within the sample, volume-averaged photon flux within the detector, and high-purity gamma-ray spectrometer response (only for polyethylene) were completed using RADSAT and MCNP. The code-to-code comparisons show promising results for the coupled Monte Carlo-deterministic method. The RADSAT-NG cross-section production method showed good agreement with NJOY for all materials considered although some additional work is needed in the resonance region and in the first and last energy bin. Some cross section discrepancies existed in the lowest and highest energy bin, but the overall shape and magnitude of the two methods agreed. For the volume-averaged photon flux within the detector, typically the five most intense lines agree to within approximately 5% of the MCNP calculated flux for all of materials considered. The agreement in the code-to-code comparisons cases demonstrates a proof-of-concept of the method for use in RADSAT for coupled neutron-photon problems in high-resolution gamma-ray spectroscopy applications. One of the primary motivators for using the coupled method over pure Monte Carlo method is the potential for significantly lower computational times. For the code-to-code comparison cases, the run times for RADSAT were approximately 25--500 times shorter than for MCNP, as shown in Table 1. This was assuming a 40 mCi 252Cf neutron source and 600 seconds of "real-world" measurement time. The only variance reduction technique implemented in the MCNP calculation was forward biasing of the source toward the sample target. Improved MCNP runtimes could be achieved with the addition of more advanced variance reduction techniques.

Cross-Cultural Invariance of the Mental Toughness Inventory Among Australian, Chinese, and Malaysian Athletes: A Bayesian Estimation Approach.

PubMed

Gucciardi, Daniel F; Zhang, Chun-Qing; Ponnusamy, Vellapandian; Si, Gangyan; Stenling, Andreas

2016-04-01

The aims of this study were to assess the cross-cultural invariance of athletes' self-reports of mental toughness and to introduce and illustrate the application of approximate measurement invariance using Bayesian estimation for sport and exercise psychology scholars. Athletes from Australia (n = 353, Mage = 19.13, SD = 3.27, men = 161), China (n = 254, Mage = 17.82, SD = 2.28, men = 138), and Malaysia (n = 341, Mage = 19.13, SD = 3.27, men = 200) provided a cross-sectional snapshot of their mental toughness. The cross-cultural invariance of the mental toughness inventory in terms of (a) the factor structure (configural invariance), (b) factor loadings (metric invariance), and (c) item intercepts (scalar invariance) was tested using an approximate measurement framework with Bayesian estimation. Results indicated that approximate metric and scalar invariance was established. From a methodological standpoint, this study demonstrated the usefulness and flexibility of Bayesian estimation for single-sample and multigroup analyses of measurement instruments. Substantively, the current findings suggest that the measurement of mental toughness requires cultural adjustments to better capture the contextually salient (emic) aspects of this concept.

Measuring Youth Development: A Nonparametric Cross-Country "Youth Welfare Index"

ERIC Educational Resources Information Center

Chaaban, Jad M.

2009-01-01

This paper develops an empirical methodology for the construction of a synthetic multi-dimensional cross-country comparison of the performance of governments around the world in improving the livelihood of their younger population. The devised "Youth Welfare Index" is based on the nonparametric Data Envelopment Analysis (DEA) methodology and…

Which measure of quality of life performs best in older age? A comparison of the OPQOL, CASP-19 and WHOQOL-OLD

PubMed Central

Stenner, Paul

2010-01-01

Background Most measures of quality of life (QoL) are based on ‘expert’ opinions. This study describes a new measure of QoL in older age, the Older People's QoL Questionnaire (OPQOL), which is unique in being derived from the views of lay people, cross-checked against theoretical models for assessment of comprehensiveness. Its performance was assessed cross-sectionally and longitudinally. It was compared with two existing QoL measures in the cross-sectional studies in order to identify the optimal measure for use with older populations. Methods Data were taken from three surveys of older people living at home in Britain in 2007–2008: one population survey of people aged 65+, one focused enumeration survey of ethnically diverse older people aged 65+, one follow-up of a population survey of people aged 65+ at baseline in 1999/2000. Measures were QoL (using OPQOL, Control, Autonomy, Satisfaction, Pleasure - 19 items (CASP-19), World Health Organization Quality of Life questionnaire - version for older people (WHOQOL-OLD)), health, social and socioeconomic circumstances. The CASP-19 and WHOQOL-OLD were not administered to the longitudinal sample in order to reduce respondent burden. Results Psychometric tests were applied to each QoL measure. The OPQOL, CASP-19 and WHOQOL-OLD performed well with the cross-sectional samples; however, only the OPQOL met criteria for internal consistency in the Ethnibus samples. Conclusion The OPQOL is of potential value in the outcome assessment of health and social interventions, which can have a multidimensional impact on people's lives. Further research is needed to examine whether differences by ethnicity reflect real differences in QoL, methodological issues, variations in expectations or cultural differences in reporting. PMID:20719807

Which measure of quality of life performs best in older age? A comparison of the OPQOL, CASP-19 and WHOQOL-OLD.

PubMed

Bowling, Ann; Stenner, Paul

2011-03-01

Most measures of quality of life (QoL) are based on 'expert' opinions. This study describes a new measure of QoL in older age, the Older People's QoL Questionnaire (OPQOL), which is unique in being derived from the views of lay people, cross-checked against theoretical models for assessment of comprehensiveness. Its performance was assessed cross-sectionally and longitudinally. It was compared with two existing QoL measures in the cross-sectional studies in order to identify the optimal measure for use with older populations. Data were taken from three surveys of older people living at home in Britain in 2007-2008: one population survey of people aged 65+, one focused enumeration survey of ethnically diverse older people aged 65+, one follow-up of a population survey of people aged 65+ at baseline in 1999/2000. Measures were QoL (using OPQOL, Control, Autonomy, Satisfaction, Pleasure--19 items (CASP-19), World Health Organization Quality of Life questionnaire--version for older people (WHOQOL-OLD)), health, social and socioeconomic circumstances. The CASP-19 and WHOQOL-OLD were not administered to the longitudinal sample in order to reduce respondent burden. Psychometric tests were applied to each QoL measure. The OPQOL, CASP-19 and WHOQOL-OLD performed well with the cross-sectional samples; however, only the OPQOL met criteria for internal consistency in the Ethnibus samples. The OPQOL is of potential value in the outcome assessment of health and social interventions, which can have a multidimensional impact on people's lives. Further research is needed to examine whether differences by ethnicity reflect real differences in QoL, methodological issues, variations in expectations or cultural differences in reporting.

Methodology and Estimates of Scour at Selected Bridge Sites in Alaska

USGS Publications Warehouse

Heinrichs, Thomas A.; Kennedy, Ben W.; Langley, Dustin E.; Burrows, Robert L.

2001-01-01

The U.S. Geological Survey estimated scour depths at 325 bridges in Alaska as part of a cooperative agreement with the Alaska Department of Transportation and Public Facilities. The department selected these sites from approximately 806 State-owned bridges as potentially susceptible to scour during extreme floods. Pier scour and contraction scour were computed for the selected bridges by using methods recommended by the Federal Highway Administration. The U.S. Geological Survey used a four-step procedure to estimate scour: (1) Compute magnitudes of the 100- and 500-year floods. (2) Determine cross-section geometry and hydraulic properties for each bridge site. (3) Compute the water-surface profile for the 100- and 500-year floods. (4) Compute contraction and pier scour. This procedure is unique because the cross sections were developed from existing data on file to make a quantitative estimate of scour. This screening method has the advantage of providing scour depths and bed elevations for comparison with bridge-foundation elevations without the time and expense of a field survey. Four examples of bridge-scour analyses are summarized in the appendix.

How to measure a complete set of polarization-dependent differential cross sections in a scattering experiment with aligned reagents?

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Fengyan, E-mail: fengyanwang@fudan.edu.cn, E-mail: kliu@po.iams.sinica.edu.tw; Department of Chemistry, Fudan University, Shanghai 200433; Lin, Jui-San

2014-02-28

Polarization-dependent differential cross section (PDDCS) is one of the three-vector correlations (k, k{sup ′}, j) in molecular collisions, which provides the most detailed insights into the steric requirements of chemical reactions, i.e., how the reactivity depends on the polarization of reagents. Only quite recently has such quantity been fully realized experimentally in the study of the reaction of the aligned CHD{sub 3}(v{sub 1} = 1, |jK〉 = |10〉) molecules with Cl({sup 2}P{sub 3/2}) atoms. Theoretically, PDDCS is a relatively new concept; experimental realization of the theoretical construct requires some careful considerations that are not readily available in the literature. Here,more » we present the “know-how” behind the full PDDCS measurements to fill the gaps and to provide a clear roadmap for future applications. To make the connection apparent between the methodology presented here and the stereodynamics revealed in previous reports, the same Cl + aligned CHD{sub 3} reaction is used for illustration.« less

Training practitioners in preparing systematic reviews: a cross-sectional survey of participants in the Australasian Cochrane Centre training program.

PubMed

Piehl, Janet H; Green, Sally; Silagy, Chris

2002-06-02

Although systematic reviews of health care interventions are an invaluable tool for health care providers and researchers, many potential authors never publish reviews. This study attempts to determine why some people with interest in performing systematic reviews do not subsequently publish a review; and what steps could possibly increase review completion. Cross-sectional survey by email and facsimile of the 179 participants in Australasian Cochrane Centre training events between 1998 and 2000. Ninety-two participants responded to the survey (51 percent). Response rate of deliverable surveys was 82 percent (92/112). The remainder of the participants had invalid or no contact information on file. More than 75 percent of respondents felt that the current workshops met their needs for training. The most critical barriers to completion of a Cochrane review were: lack of time (80 percent), lack of financial support (36 percent), methodological problems (23 percent) and problems with group dynamics (10 percent). Strategies to protect reviewer time and increase the efficiency of the review process may increase the numbers of trained reviewers completing a systematic review.

Hip abductor strength and lower extremity running related injury in distance runners: A systematic review.

PubMed

Mucha, Matthew D; Caldwell, Wade; Schlueter, Emily L; Walters, Carly; Hassen, Amy

2017-04-01

Determine the association between hip abduction strength and lower extremity running related injury in distance runners. Systematic review. Prospective longitudinal and cross sectional studies that quantified hip abduction strength and provided diagnosis of running related injury in distance runners were included and assessed for quality. Effect size was calculated for between group differences in hip abduction strength. Of the 1841 articles returned in the initial search, 11 studies matched all inclusion criteria. Studies were grouped according to injury: iliotibial band syndrome, patellofemoral pain syndrome, medial tibial stress syndrome, tibial stress fracture, and Achilles tendinopathy, and examined for strength differences between injured and non-injured groups. Meaningful differences were found in the studies examining iliotibial band syndrome. Three of five iliotibial band syndrome articles found weakness in runners with iliotibial band syndrome; two were of strong methodological rigor and both of those found a relationship between weakness and injury. Other results did not form associative or predictive relationships between weakness and injury in distance runners. Hip abduction weakness evaluated by hand held dynamometer may be associated with iliotibial band syndrome in distance runners as suggested by several cross sectional studies but is unclear as a significant factor for the development of patellofemoral pain syndrome, medial tibial stress syndrome, tibial stress fracture or Achilles tendinopathy according to the current literature. Future studies are needed with consistent methodology and inclusion of all distance running populations to determine the significance of hip abduction strength in relationship to lower extremity injury. Copyright © 2016 Sports Medicine Australia. Published by Elsevier Ltd. All rights reserved.

Dual-energy X-ray absorptiometry derived structural geometry for stress fracture prediction in male U.S. Marine Corps recruits.

PubMed

Beck, T J; Ruff, C B; Mourtada, F A; Shaffer, R A; Maxwell-Williams, K; Kao, G L; Sartoris, D J; Brodine, S

1996-05-01

A total of 626 U.S. male Marine Corps recruits underwent anthropometric measurements and dual-energy X-ray absorptiometry (DXA) scans of the femoral midshaft and the distal third of the tibia prior to a 12 week physical training program. Conventionally obtained frontal plane DXA scan data were used to measure the bone mineral density (BMD) as well as to derive the cross-sectional area, moment of inertia, section modulus, and bone width in the femur, tibia, and fibula. During training, 23 recruits (3.7%) presented with a total of 27 radiologically confirmed stress fractures in various locations in the lower extremity. After excluding 16 cases of shin splints, periostitis, and other stress reactions that did not meet fracture definition criteria, we compared anthropometric and bone structural geometry measurements between fracture cases and the remaining 587 normals. There was no significant difference in age (p = 0.8), femur length (p = 0.2), pelvic width (p = 0.08), and knee width at the femoral condyles (p = 0.06), but fracture cases were shorter (p = 0.01), lighter (p = 0.0006), and smaller in most anthropometric girth dimensions (p < 0.04). Fracture case bone cross-sectional areas (p < 0.001), moments of inertia (p < 0.001), section moduli (p < 0.001), and widths (p < 0.001) as well as BMD (p < 0.03) were significantly smaller in the tibia and femur. After correcting for body weight differences, the tibia cross-sectional area (p = 0.03), section modulus (p = 0.05), and width (p = 0.03) remained significantly smaller in fracture subjects. We conclude that both small body weight and small diaphyseal dimensions relative to body weight are factors predisposing to the development of stress fractures in this population. These results suggest that bone structural geometry measurements derived from DXA data may provide a simple noninvasive methodology for assessing the risk of stress fracture.

Composite Beam Theory with Material Nonlinearities and Progressive Damage

NASA Astrophysics Data System (ADS)

Jiang, Fang

Beam has historically found its broad applications. Nowadays, many engineering constructions still rely on this type of structure which could be made of anisotropic and heterogeneous materials. These applications motivate the development of beam theory in which the impact of material nonlinearities and damage on the global constitutive behavior has been a focus in recent years. Reliable predictions of these nonlinear beam responses depend on not only the quality of the material description but also a comprehensively generalized multiscale methodology which fills the theoretical gaps between the scales in an efficient yet high-fidelity manner. The conventional beam modeling methodologies which are built upon ad hoc assumptions are in lack of such reliability in need. Therefore, the focus of this dissertation is to create a reliable yet efficient method and the corresponding tool for composite beam modeling. A nonlinear beam theory is developed based on the Mechanics of Structure Genome (MSG) using the variational asymptotic method (VAM). The three-dimensional (3D) nonlinear continuum problem is rigorously reduced to a one-dimensional (1D) beam model and a two-dimensional (2D) cross-sectional analysis featuring both geometric and material nonlinearities by exploiting the small geometric parameter which is an inherent geometric characteristic of the beam. The 2D nonlinear cross-sectional analysis utilizes the 3D material models to homogenize the beam cross-sectional constitutive responses considering the nonlinear elasticity and progressive damage. The results from such a homogenization are inputs as constitutive laws into the global nonlinear 1D beam analysis. The theoretical foundation is formulated without unnecessary kinematic assumptions. Curvilinear coordinates and vector calculus are utilized to build the 3D deformation gradient tensor, of which the components are formulated in terms of cross-sectional coordinates, generalized beam strains, unknown warping functions, and the 3D spatial gradients of these warping functions. Asymptotic analysis of the extended Hamiltonian's principle suggests dropping the terms of axial gradients of the warping functions. As a result, the solid mechanics problem resolved into a 3D continuum is dimensionally reduced to a problem of solving the warping functions on a 2D cross-sectional field by minimizing the information loss. The present theory is implemented using the finite element method (FEM) in Variational Asymptotic Beam Sectional Analysis (VABS), a general-purpose cross-sectional analysis tool. An iterative method is applied to solve the finite warping field for the classical-type model in the form of the Euler-Bernoulli beam theory. The deformation gradient tensor is directly used to enable the capability of dealing with finite deformation, various strain definitions, and several types of material constitutive laws regarding the nonlinear elasticity and progressive damage. Analytical and numerical examples are given for various problems including the trapeze effect, Poynting effect, Brazier effect, extension-bending coupling effect, and free edge damage. By comparison with the predictions from 3D finite element analyses (FEA), 2D FEA based on plane stress assumptions, and experimental data, the structural and material responses are proven to be rigorously captured by the present theory and the computational cost is significantly reduced. Due to the semi-analytical feature of the code developed, the unrealistic numerical issues widely seen in the conventional FEA with strain softening material behaviors are prevented by VABS. In light of these intrinsic features, the nonlinear elastic and inelastic 3D material models can be economically calibrated by data-matching the VABS predictions directly with the experimental measurements from slender coupons. Furthermore, the global behavior of slender composite structures in meters can also be effectively characterized by VABS without unnecessary loss of important information of its local laminae in micrometers.

Methodology of a nationwide cross-sectional survey of prevalence and epidemiological patterns of hepatitis A, B and C infection in Brazil.

PubMed

Ximenes, Ricardo Arraes de Alencar; Pereira, Leila Maria Beltrão; Martelli, Celina Maria Turchi; Merchán-Hamann, Edgar; Stein, Airton Tetelbom; Figueiredo, Gerusa Maria; Braga, Maria Cynthia; Montarroyos, Ulisses Ramos; Brasil, Leila Melo; Turchi, Marília Dalva; Fonseca, José Carlos Ferraz da; Lima, Maria Luiza Carvalho de; Alencar, Luis Cláudio Arraes de; Costa, Marcelo; Coral, Gabriela; Moreira, Regina Celia; Cardoso, Maria Regina Alves

2010-09-01

A population-based survey to provide information on the prevalence of hepatitis viral infection and the pattern of risk factors was carried out in the urban population of all Brazilian state capitals and the Federal District, between 2005 and 2009. This paper describes the design and methodology of the study which involved a population aged 5 to 19 for hepatitis A and 10 to 69 for hepatitis B and C. Interviews and blood samples were obtained through household visits. The sample was selected using stratified multi-stage cluster sampling and was drawn with equal probability from each domain of study (region and age-group). Nationwide, 19,280 households and ~31,000 residents were selected. The study is large enough to detect prevalence of viral infection around 0.1% and risk factor assessments within each region. The methodology seems to be a viable way of differentiating between distinct epidemiological patterns of hepatitis A, B and C. These data will be of value for the evaluation of vaccination policies and for the design of control program strategies.

VERA Core Simulator Methodology for PWR Cycle Depletion

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kochunas, Brendan; Collins, Benjamin S; Jabaay, Daniel

2015-01-01

This paper describes the methodology developed and implemented in MPACT for performing high-fidelity pressurized water reactor (PWR) multi-cycle core physics calculations. MPACT is being developed primarily for application within the Consortium for the Advanced Simulation of Light Water Reactors (CASL) as one of the main components of the VERA Core Simulator, the others being COBRA-TF and ORIGEN. The methods summarized in this paper include a methodology for performing resonance self-shielding and computing macroscopic cross sections, 2-D/1-D transport, nuclide depletion, thermal-hydraulic feedback, and other supporting methods. These methods represent a minimal set needed to simulate high-fidelity models of a realistic nuclearmore » reactor. Results demonstrating this are presented from the simulation of a realistic model of the first cycle of Watts Bar Unit 1. The simulation, which approximates the cycle operation, is observed to be within 50 ppm boron (ppmB) reactivity for all simulated points in the cycle and approximately 15 ppmB for a consistent statepoint. The verification and validation of the PWR cycle depletion capability in MPACT is the focus of two companion papers.« less

Which psychosocial factors are related to chelation adherence in thalassemia? A systematic review.

PubMed

Evangeli, Michael; Mughal, Kulsoom; Porter, John B

2010-06-01

Good adherence to iron chelation therapy in thalassemia is crucial. Although there is evidence that adherence is related to regimen factors, there has been less emphasis on the relationship between psychosocial (psychological, demographic and social) factors and adherence. We present a systematic review of psychosocial correlates of chelation adherence in thalassemia. Nine studies met the inclusion criteria. Information was extracted regarding the study characteristics and the relationship between psychosocial factors and chelation adherence. Methodological quality was rated. The studies took place in a range of countries, were mostly cross sectional in design, and examined adherence to deferoxamine (DFO) only. Sample sizes ranged from 15 to 1573. A variety of psychosocial variables were examined. Definitions of adherence varied between studies and non adherence rates were also variable (9 to 66%). Older age was consistently associated with lower levels of chelation adherence. There were few other consistent findings. The methodological quality of studies was variable. There is a need for more methodologically sophisticated and theoretically informed studies on psychosocial correlates of chelation adherence. We offer specific suggestions.

Cation-exchange high-performance liquid chromatography for variant hemoglobins and HbF/A2: What must hematopathologists know about methodology?

PubMed

Sharma, Prashant; Das, Reena

2016-03-26

Cation-exchange high-performance liquid chromatography (CE-HPLC) is a widely used laboratory test to detect variant hemoglobins as well as quantify hemoglobins F and A2 for the diagnosis of thalassemia syndromes. It's versatility, speed, reproducibility and convenience have made CE-HPLC the method of choice to initially screen for hemoglobin disorders. Despite its popularity, several methodological aspects of the technology remain obscure to pathologists and this may have consequences in specific situations. This paper discusses the basic principles of the technique, the initial quality control steps and the interpretation of various controls and variables that are available on the instrument output. Subsequent sections are devoted to methodological considerations that arise during reporting of cases. For instance, common problems of misidentified peaks, totals crossing 100%, causes of total area being above or below acceptable limits and the importance of pre-integration region peaks are dealt with. Ultimately, CE-HPLC remains an investigation, the reporting of which combines in-depth knowledge of the biological basics with more than a working knowledge of the technological aspects of the technique.

Electrical cable utilization for wave energy converters

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bull, Diana; Baca, Michael; Schenkman, Benjamin

Here, this paper investigates the suitability of sizing the electrical export cable based on the rating of the contributing WECs within a farm. These investigations have produced a new methodology to evaluate the probabilities associated with peak power values on an annual basis. It has been shown that the peaks in pneumatic power production will follow an exponential probability function for a linear model. A methodology to combine all the individual probability functions into an annual view has been demonstrated on pneumatic power production by a Backward Bent Duct Buoy (BBDB). These investigations have also resulted in a highly simplifiedmore » and perfunctory model of installed cable cost as a function of voltage and conductor cross-section. This work solidifies the need to determine electrical export cable rating based on expected energy delivery as opposed to device rating as small decreases in energy delivery can result in cost savings.« less

Electrical cable utilization for wave energy converters

DOE PAGES

Bull, Diana; Baca, Michael; Schenkman, Benjamin

2018-04-27

Here, this paper investigates the suitability of sizing the electrical export cable based on the rating of the contributing WECs within a farm. These investigations have produced a new methodology to evaluate the probabilities associated with peak power values on an annual basis. It has been shown that the peaks in pneumatic power production will follow an exponential probability function for a linear model. A methodology to combine all the individual probability functions into an annual view has been demonstrated on pneumatic power production by a Backward Bent Duct Buoy (BBDB). These investigations have also resulted in a highly simplifiedmore » and perfunctory model of installed cable cost as a function of voltage and conductor cross-section. This work solidifies the need to determine electrical export cable rating based on expected energy delivery as opposed to device rating as small decreases in energy delivery can result in cost savings.« less

The measurement of substance use among adolescents: when is the 'bogus pipeline' method needed?

PubMed

Murray, D M; Perry, C L

1987-01-01

The use of objective measures to assess cigarette smoking among adolescents has become commonplace in research studies in recent years. This trend is based on evidence that this so called pipeline methodology can increase the disclosure of socially proscribed behaviors in a setting where adolescents might otherwise feel pressure to deny that they smoke. This paper examines the effects of the pipeline methodology alone and in combination with procedures designed to ensure anonymity on the disclosure of tobacco, alcohol, and marijuana use by young adolescents. The data indicate that the pipeline procedures significantly increase disclosure of tobacco and marijuana use when students are promised confidentiality but not anonymity. However, when anonymity was assured, disclosure of cigarette use was just as high without the pipeline; for marijuana use, disclosure was higher without the pipeline. No effects were observed for alcohol disclosure. These data are interpreted for their implications for prospective and cross sectional studies.

Texture analysis of Napoleonic War Era copper bolts

NASA Astrophysics Data System (ADS)

Malamud, Florencia; Northover, Shirley; James, Jon; Northover, Peter; Kelleher, Joe

2016-04-01

Neutron diffraction techniques are suitable for volume texture analyses due to high penetration of thermal neutrons in most materials. We have implemented a new data analysis methodology that employed the spatial resolution achievable by a time-of-flight neutron strain scanner to non-destructively determine the crystallographic texture at selected locations within a macroscopic sample. The method is based on defining the orientation distribution function of the crystallites from several incomplete pole figures, and it has been implemented on ENGIN-X, a neutron strain scanner at the Isis Facility in the UK. Here, we demonstrate the application of this new texture analysis methodology in determining the crystallographic texture at selected locations within museum quality archaeological objects up to 1 m in length. The results were verified using samples of similar, but less valuable, objects by comparing the results of applying this method with those obtained using both electron backscatter diffraction and X-ray diffraction on their cross sections.

The role of adult attachment and social support in hoarding disorder.

PubMed

Medard, Emma; Kellett, Stephen

2014-09-01

Research concerning the role of attachment and social support in hoarding is currently under investigated. To investigate whether hoarders experience less social support and more problematic relationships, the degree to which attachment and social support predicts hoarding and whether attachment moderates the relationship between social support and hoarding. Measures of hoarding, attachment and social support were taken in a cross-sectional methodological design. Hoarders were identified via scores reaching caseness on the Savings Inventory-Revised (SI-R). Hoarders (N = 380) reported significantly higher levels of attachment anxiety and avoidance and significantly lower levels of social support than student (N = 670) and community (N = 379) controls. Attachment and social support predicted 13% of total SI-R scores for hoarders, and attachment anxiety (but not avoidance) moderated the inverse relationship between social support and hoarding. Attachment and social support appears problematic for hoarders. Clinical implications and methodological issues are noted.

Optimal illusion and invisibility of multilayered anisotropic cylinders and spheres.

PubMed

Zhang, Lin; Shi, Yan; Liang, Chang-Hong

2016-10-03

In this paper, full-wave electromagnetic scattering theory is employed to investigate illusion and invisibility of inhomogeneous anisotropic cylinders and spheres. With the use of a shell designed according to Mie series theory for multiple piecewise anisotropic layers, radar cross section (RCS) of the coated inhomogeneous anisotropic object can be dramatically reduced or disguised as another object in the long-wavelength limit. With the suitable adjustment of the anisotropy parameters of the shell, optimal illusion and invisibility characteristics of the coated inhomogeneous anisotropic object can be achieved. Details of theoretical analysis and numerical examples are presented to validate the proposed methodology.

New Methodologies for Generation of Multigroup Cross Sections for Shielding Applications

NASA Astrophysics Data System (ADS)

Arzu Alpan, F.; Haghighat, Alireza

2003-06-01

Coupled neutron and gamma multigroup (broad-group) libraries used for Light Water Reactor shielding and dosimetry commonly include 47-neutron and 20-gamma groups. These libraries are derived from the 199-neutron, 42-gamma fine-group VITAMIN-B6 library. In this paper, we introduce modifications to the generation procedure of the broad-group libraries. Among these modifications, we show that the fine-group structure and collapsing technique have the largest impact. We demonstrate that a more refined fine-group library and the bi-linear adjoint weighting collapsing technique can improve the accuracy of transport calculation results.

The IAEA coordinated research programme on HTGR uncertainty analysis: Phase I status and Ex. I-1 prismatic reference results

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bostelmann, Friederike; Strydom, Gerhard; Reitsma, Frederik

The quantification of uncertainties in design and safety analysis of reactors is today not only broadly accepted, but in many cases became the preferred way to replace traditional conservative analysis for safety and licensing analysis. The use of a more fundamental methodology is also consistent with the reliable high fidelity physics models and robust, efficient, and accurate codes available today. To facilitate uncertainty analysis applications a comprehensive approach and methodology must be developed and applied, in contrast to the historical approach where sensitivity analysis were performed and uncertainties then determined by a simplified statistical combination of a few important inputmore » parameters. New methodologies are currently under development in the OECD/NEA Light Water Reactor (LWR) Uncertainty Analysis in Best-Estimate Modelling (UAM) benchmark activity. High Temperature Gas-cooled Reactor (HTGR) designs require specific treatment of the double heterogeneous fuel design and large graphite quantities at high temperatures. The IAEA has therefore launched a Coordinated Research Project (CRP) on HTGR Uncertainty Analysis in Modelling (UAM) in 2013 to study uncertainty propagation specifically in the HTGR analysis chain. Two benchmark problems are defined, with the prismatic design represented by the General Atomics (GA) MHTGR-350 and a 250 MW modular pebble bed design similar to the Chinese HTR-PM. Work has started on the first phase and the current CRP status is reported in the paper. A comparison of the Serpent and SCALE/KENO-VI reference Monte Carlo results for Ex. I-1 of the MHTGR-350 design is also included. It was observed that the SCALE/KENO-VI Continuous Energy (CE) k ∞ values were 395 pcm (Ex. I-1a) to 803 pcm (Ex. I-1b) higher than the respective Serpent lattice calculations, and that within the set of the SCALE results, the KENO-VI 238 Multi-Group (MG) k ∞ values were up to 800 pcm lower than the KENO-VI CE values. The use of the latest ENDF-B-VII.1 cross section library in Serpent lead to ~180 pcm lower k ∞ values compared to the older ENDF-B-VII.0 dataset, caused by the modified graphite neutron capture cross section. Furthermore, the fourth beta release of SCALE 6.2 likewise produced lower CE k∞ values when compared to SCALE 6.1, and the improved performance of the new 252-group library available in SCALE 6.2 is especially noteworthy. A SCALE/TSUNAMI uncertainty analysis of the Hot Full Power variant for Ex. I-1a furthermore concluded that the 238U(n,γ) (capture) and 235U(View the MathML source) cross-section covariance matrices contributed the most to the total k ∞ uncertainty of 0.58%.« less

The IAEA coordinated research programme on HTGR uncertainty analysis: Phase I status and Ex. I-1 prismatic reference results

DOE PAGES

Bostelmann, Friederike; Strydom, Gerhard; Reitsma, Frederik; ...

2016-01-11

The quantification of uncertainties in design and safety analysis of reactors is today not only broadly accepted, but in many cases became the preferred way to replace traditional conservative analysis for safety and licensing analysis. The use of a more fundamental methodology is also consistent with the reliable high fidelity physics models and robust, efficient, and accurate codes available today. To facilitate uncertainty analysis applications a comprehensive approach and methodology must be developed and applied, in contrast to the historical approach where sensitivity analysis were performed and uncertainties then determined by a simplified statistical combination of a few important inputmore » parameters. New methodologies are currently under development in the OECD/NEA Light Water Reactor (LWR) Uncertainty Analysis in Best-Estimate Modelling (UAM) benchmark activity. High Temperature Gas-cooled Reactor (HTGR) designs require specific treatment of the double heterogeneous fuel design and large graphite quantities at high temperatures. The IAEA has therefore launched a Coordinated Research Project (CRP) on HTGR Uncertainty Analysis in Modelling (UAM) in 2013 to study uncertainty propagation specifically in the HTGR analysis chain. Two benchmark problems are defined, with the prismatic design represented by the General Atomics (GA) MHTGR-350 and a 250 MW modular pebble bed design similar to the Chinese HTR-PM. Work has started on the first phase and the current CRP status is reported in the paper. A comparison of the Serpent and SCALE/KENO-VI reference Monte Carlo results for Ex. I-1 of the MHTGR-350 design is also included. It was observed that the SCALE/KENO-VI Continuous Energy (CE) k ∞ values were 395 pcm (Ex. I-1a) to 803 pcm (Ex. I-1b) higher than the respective Serpent lattice calculations, and that within the set of the SCALE results, the KENO-VI 238 Multi-Group (MG) k ∞ values were up to 800 pcm lower than the KENO-VI CE values. The use of the latest ENDF-B-VII.1 cross section library in Serpent lead to ~180 pcm lower k ∞ values compared to the older ENDF-B-VII.0 dataset, caused by the modified graphite neutron capture cross section. Furthermore, the fourth beta release of SCALE 6.2 likewise produced lower CE k∞ values when compared to SCALE 6.1, and the improved performance of the new 252-group library available in SCALE 6.2 is especially noteworthy. A SCALE/TSUNAMI uncertainty analysis of the Hot Full Power variant for Ex. I-1a furthermore concluded that the 238U(n,γ) (capture) and 235U(View the MathML source) cross-section covariance matrices contributed the most to the total k ∞ uncertainty of 0.58%.« less

Differential Item Functioning of a Family Affluence Scale: Validation Study on Data from HBSC 2001/02

ERIC Educational Resources Information Center

Schnohr, C. W.; Kreiner, S.; Due, E. P.; Currie, C.; Boyce, W.; Diderichsen, F.

2008-01-01

Methodology for making cross-national comparisons is an area of increasing interest in social and public health related research. When studying socio-economic differences in health outcomes cross-nationally, there are several methodological issues of concern, especially when data is derived from self-reported questionnaires. Health Behaviour in…

Using the Photovoice Methodology to Increase Engagement and Sharpen Students' Analytical Skills Regarding Cultures, Lifestyles, and Markets Internationally

ERIC Educational Resources Information Center

Kelly, Kathleen; Lee, Seung Hwan; Bowen Ray, Heather; Kandaurova, Maria

2018-01-01

Barriers to cross-cultural instruction challenge even experienced educators and their students. To increase cross-cultural competence and bridge learning gaps, professors in two countries adapted the Photovoice methodology to develop shared visual vocabularies with students and unearth hidden assumptions. Results from an anonymous evaluation…

[What is the methodological quality of articles on therapeutic procedures published in Cirugía Española?].

PubMed

Manterola, Carlos; Busquets, Juli; Pascual, Marta; Grande, Luis

2006-02-01

The aim of this study was to determine the methodological quality of articles on therapeutic procedures published in Cirugía Española and to study its association with the publication year, center, and subject-matter. A bibliometric study that included all articles on therapeutic procedures published in Cirugía Española between 2001 and 2004 was performed. All kinds of clinical designs were considered, excluding editorials, review articles, letters to editor, and experimental studies. The variables analyzed were: year of publication, center, design, and methodological quality. Methodological quality was determined by a valid and reliable scale. Descriptive statistics (calculation of means, standard deviation and medians) and analytical statistics (Pearson's chi2, nonparametric, ANOVA and Bonferroni tests) were used. A total of 244 articles were studied (197 case series [81%], 28 cohort studies [12%], 17 clinical trials [7%], 1 cross sectional study and 1 case-control study [0.8%]). The studies were performed mainly in Catalonia and Murcia (22% and 16%, respectively). The most frequent subject areas were soft tissue and hepatobiliopancreatic surgery (23% and 19%, respectively). The mean and median of the methodological quality score calculated for the entire series was 10.2 +/- 3.9 points and 9.5 points, respectively. Methodological quality significantly increased by publication year (p < 0.001). An association between methodological quality and subject area was observed but no association was detected with the center performing the study. The methodological quality of articles on therapeutic procedures published in Cirugía Española between 2001 and 2004 is low. However, a statistically significant trend toward improvement was observed.

Authentic leadership in healthcare: a scoping review.

PubMed

Malila, Niina; Lunkka, Nina; Suhonen, Marjo

2018-02-05

Purpose The purpose of this paper is to review peer-reviewed original research articles on authentic leadership (AL) in health care to identify potential research gaps and present recommendations for future research. The objectives are to examine and map evidence of the main characteristics, research themes and methodologies in the studies. AL is a leader's non-authoritarian, ethical and transparent behaviour pattern. Design/methodology/approach A scoping review with thematic analysis was conducted. A three-step search strategy was used with database and manual searches. The included studies were composed of English language peer-reviewed original research articles referring to both AL and health care. Findings In total, 29 studies were included. The studies favoured Canadian nurses in acute care hospitals. AL was understood as its original definition. The review identified four research themes: well-being at work, patient care quality, work environment and AL promotion. Quantitative research methodology with the authentic leadership questionnaire and cross-sectional design were prevalent. Research limitations/implications Future research needs more variation in research themes, study populations, settings, organisations, work sectors, geographical origins and theory perspectives. Different research methodologies, such as qualitative and mixed methods research and longitudinal designs, should be used more. Originality/value This is presumably the first literature review to map the research on AL in health care.

Behavioural and Autonomic Regulation of Response to Sensory Stimuli among Children: A Systematic Review of Relationship and Methodology.

PubMed

Gomez, Ivan Neil; Lai, Cynthia Y Y; Morato-Espino, Paulin Grace; Chan, Chetwyn C H; Tsang, Hector W H

2017-01-01

Previous studies have explored the correlates of behavioural and autonomic regulation of response to sensory stimuli in children; however, a comprehensive review of such relationship is lacking. This systematic review was performed to critically appraise the current evidence on such relationship and describe the methods used in these studies. Online databases were systematically searched for peer-reviewed, full-text articles in the English language between 1999 and 2016, initially screened by title and abstract, and appraised and synthesized by two independent review authors. Fourteen Level III-3 cross-sectional studies were included for systematic review, among which six studies explored the relationship between behaviour and physiological regulation of responses to sensory stimuli. Three studies reported significant positive weak correlations among ASD children; however, no correlations were found in typically developing children. Methodological differences related to individual differences among participants, measures used, and varied laboratory experimental setting were noted. This review suggests inconclusive evidence supporting the relationship between behavioural and physiological regulation of responses to sensory stimuli among children. Methodological differences may likely have confounded the results of the current evidence. We present methodological recommendations to address this matter for future researches. This trial is registered with PROSPERO registration number CRD42016043887.

Behavioural and Autonomic Regulation of Response to Sensory Stimuli among Children: A Systematic Review of Relationship and Methodology

PubMed Central

Morato-Espino, Paulin Grace; Chan, Chetwyn C. H.; Tsang, Hector W. H.

2017-01-01

Background Previous studies have explored the correlates of behavioural and autonomic regulation of response to sensory stimuli in children; however, a comprehensive review of such relationship is lacking. This systematic review was performed to critically appraise the current evidence on such relationship and describe the methods used in these studies. Methods Online databases were systematically searched for peer-reviewed, full-text articles in the English language between 1999 and 2016, initially screened by title and abstract, and appraised and synthesized by two independent review authors. Results Fourteen Level III-3 cross-sectional studies were included for systematic review, among which six studies explored the relationship between behaviour and physiological regulation of responses to sensory stimuli. Three studies reported significant positive weak correlations among ASD children; however, no correlations were found in typically developing children. Methodological differences related to individual differences among participants, measures used, and varied laboratory experimental setting were noted. Conclusion This review suggests inconclusive evidence supporting the relationship between behavioural and physiological regulation of responses to sensory stimuli among children. Methodological differences may likely have confounded the results of the current evidence. We present methodological recommendations to address this matter for future researches. This trial is registered with PROSPERO registration number CRD42016043887. PMID:29333436

Does Habitual Physical Activity Increase the Sensitivity of the Appetite Control System? A Systematic Review.

PubMed

Beaulieu, Kristine; Hopkins, Mark; Blundell, John; Finlayson, Graham

2016-12-01

It has been proposed that habitual physical activity improves appetite control; however, the evidence has never been systematically reviewed. To examine whether appetite control (e.g. subjective appetite, appetite-related peptides, food intake) differs according to levels of physical activity. Medline, Embase and SPORTDiscus were searched for articles published between 1996 and 2015, using keywords pertaining to physical activity, appetite, food intake and appetite-related peptides. Articles were included if they involved healthy non-smoking adults (aged 18-64 years) participating in cross-sectional studies examining appetite control in active and inactive individuals; or before and after exercise training in previously inactive individuals. Of 77 full-text articles assessed, 28 studies (14 cross-sectional; 14 exercise training) met the inclusion criteria. Appetite sensations and absolute energy intake did not differ consistently across studies. Active individuals had a greater ability to compensate for high-energy preloads through reductions in energy intake, in comparison with inactive controls. When physical activity level was graded across cross-sectional studies (low, medium, high, very high), a significant curvilinear effect on energy intake (z-scores) was observed. Methodological issues existed concerning the small number of studies, lack of objective quantification of food intake, and various definitions used to define active and inactive individuals. Habitually active individuals showed improved compensation for the energy density of foods, but no consistent differences in appetite or absolute energy intake, in comparison with inactive individuals. This review supports a J-shaped relationship between physical activity level and energy intake. Further studies are required to confirm these findings. CRD42015019696.

The relationship between physical activity, appetite and energy intake in older adults: A systematic review.

PubMed

Clegg, M E; Godfrey, A

2018-06-07

Ageing often causes a reduction in appetite and energy intake in older adults which can result in malnutrition. Current guidelines for older adults suggest increasing physical activity to enhance appetite. However, it is unclear if there is evidence to support this advice. This aim of this review is to assess if appetite and energy intake is changed in older adults that undertake acute or regular physical activity (measured from cross sectional and intervention studies). Databases SPORTDiscus, CINAHL, MEDLINE were searched for studies between 1970 and 2017 using search terms related to ageing, physical activity (including exercise), energy and appetite. Studies included contained adults over 60 years, including acute, cross-sectional and intervention (longitudinal) studies. Of 34 full-text articles assessed, 8 were included. The Cochrane Collaboration's tool was used for assessing risk of bias. No acute studies were found. Of the cross-sectional studies, one study suggested that individuals who undertake habitual physical activity had an increased energy intake and none of the studies found differences in appetite ratings. Energy intakes increased in the intervention studies, though not always sufficiently to maintain energy balance. One study showed that ability to correctly compensate for previous energy intake was better in those that undertake habitual physical activity. The limited number of studies, wide range of data collection methodologies, time-scales and interventions mean that definitive outcomes are difficult to identify. At this stage advice to increase acute or habitual physical activity as a mean to increase appetite is not supported by sufficient evidence. Copyright © 2018. Published by Elsevier Ltd.

Statistical uncertainty analysis applied to the DRAGONv4 code lattice calculations and based on JENDL-4 covariance data

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hernandez-Solis, A.; Demaziere, C.; Ekberg, C.

2012-07-01

In this paper, multi-group microscopic cross-section uncertainty is propagated through the DRAGON (Version 4) lattice code, in order to perform uncertainty analysis on k{infinity} and 2-group homogenized macroscopic cross-sections predictions. A statistical methodology is employed for such purposes, where cross-sections of certain isotopes of various elements belonging to the 172 groups DRAGLIB library format, are considered as normal random variables. This library is based on JENDL-4 data, because JENDL-4 contains the largest amount of isotopic covariance matrixes among the different major nuclear data libraries. The aim is to propagate multi-group nuclide uncertainty by running the DRAGONv4 code 500 times, andmore » to assess the output uncertainty of a test case corresponding to a 17 x 17 PWR fuel assembly segment without poison. The chosen sampling strategy for the current study is Latin Hypercube Sampling (LHS). The quasi-random LHS allows a much better coverage of the input uncertainties than simple random sampling (SRS) because it densely stratifies across the range of each input probability distribution. Output uncertainty assessment is based on the tolerance limits concept, where the sample formed by the code calculations infers to cover 95% of the output population with at least a 95% of confidence. This analysis is the first attempt to propagate parameter uncertainties of modern multi-group libraries, which are used to feed advanced lattice codes that perform state of the art resonant self-shielding calculations such as DRAGONv4. (authors)« less

Impact of sampling techniques on measured stormwater quality data for small streams

USGS Publications Warehouse

Harmel, R.D.; Slade, R.M.; Haney, R.L.

2010-01-01

Science-based sampling methodologies are needed to enhance water quality characterization for setting appropriate water quality standards, developing Total Maximum Daily Loads, and managing nonpoint source pollution. Storm event sampling, which is vital for adequate assessment of water quality in small (wadeable) streams, is typically conducted by manual grab or integrated sampling or with an automated sampler. Although it is typically assumed that samples from a single point adequately represent mean cross-sectional concentrations, especially for dissolved constituents, this assumption of well-mixed conditions has received limited evaluation. Similarly, the impact of temporal (within-storm) concentration variability is rarely considered. Therefore, this study evaluated differences in stormwater quality measured in small streams with several common sampling techniques, which in essence evaluated within-channel and within-storm concentration variability. Constituent concentrations from manual grab samples and from integrated samples were compared for 31 events, then concentrations were also compared for seven events with automated sample collection. Comparison of sampling techniques indicated varying degrees of concentration variability within channel cross sections for both dissolved and particulate constituents, which is contrary to common assumptions of substantial variability in particulate concentrations and of minimal variability in dissolved concentrations. Results also indicated the potential for substantial within-storm (temporal) concentration variability for both dissolved and particulate constituents. Thus, failing to account for potential cross-sectional and temporal concentration variability in stormwater monitoring projects can introduce additional uncertainty in measured water quality data. Copyright ?? 2010 by the American Society of Agronomy, Crop Science Society of America, and Soil Science Society of America. All rights reserved.

Improving the delineation of hydrocarbon-impacted soils and water through induced polarization (IP) tomographies: a field study at an industrial waste land.

PubMed

Deceuster, John; Kaufmann, Olivier

2012-08-01

Without a good estimation of samples representativeness, the delineation of the contaminated plume extent and the evaluation of volumes of hydrocarbon-impacted soils may remain difficult. To contribute to this question, a time domain induced polarization (IP) field experiment was conducted on an industrial waste land. Boreholes were drilled to specify the local geological context. Cross-hole seismic tomographies were performed to extend borehole logs and to draw an interpreted geological cross-section. Soil samples taken during drillings were analysed in laboratory. A preliminary survey was conducted to locate the IP profile. The polarization signatures linked to the presence of clayey sediments were filtered out from the data set. Chargeability and resistivity depth soundings were computed and compared to mean concentrations of total organic products to overcome the data support issue between the geophysical models and the spot samples of soils. A logarithmic relation between chargeabilities and smoothed hydrocarbon concentrations in soils was found. Taking into account contaminant's concentration thresholds defined in local codes and regulations allows defining chargeability classes to delineate hotspots on this site. This showed that IP tomography can be an accurate screening methodology. A statistical methodology is proposed to assess the efficiency of the investigation strategy. Copyright © 2012 Elsevier B.V. All rights reserved.

Photoeffect cross sections of some rare-earth elements at 145.4 keV

NASA Astrophysics Data System (ADS)

Umesh, T. K.; Ranganathaiah, C.; Sanjeevaiah, B.

1985-08-01

Total attenuation cross sections in the elements La, Ce, Pr, Nd, Sm, Gd, Dy, Ho, and Er were derived from the measured total cross sections of their simple oxide compounds, by employing the mixture rule at 145.4-keV photon energy. The compound cross sections have been measured by performing transmission experiments in a good geometry setup. From the derived total cross sections of elements, photoeffect cross sections have been obtained by subtracting the theoretical scattering cross sections. A good agreement is observed between the present data of photoeffect cross sections and Scofield's theoretical data.

Disturbance characteristics of half-selected cells in a cross-point resistive switching memory array

NASA Astrophysics Data System (ADS)

Chen, Zhe; Li, Haitong; Chen, Hong-Yu; Chen, Bing; Liu, Rui; Huang, Peng; Zhang, Feifei; Jiang, Zizhen; Ye, Hongfei; Gao, Bin; Liu, Lifeng; Liu, Xiaoyan; Kang, Jinfeng; Wong, H.-S. Philip; Yu, Shimeng

2016-05-01

Disturbance characteristics of cross-point resistive random access memory (RRAM) arrays are comprehensively studied in this paper. An analytical model is developed to quantify the number of pulses (#Pulse) the cell can bear before disturbance occurs under various sub-switching voltage stresses based on physical understanding. An evaluation methodology is proposed to assess the disturb behavior of half-selected (HS) cells in cross-point RRAM arrays by combining the analytical model and SPICE simulation. The characteristics of cross-point RRAM arrays such as energy consumption, reliable operating cycles and total error bits are evaluated by the methodology. A possible solution to mitigate disturbance is proposed.

Application of Mls Data to the Assessment of Safety-Related Features in the Surrounding Area of Automatically Detected Pedestrian Crossings

NASA Astrophysics Data System (ADS)

Soilán, M.; Riveiro, B.; Sánchez-Rodríguez, A.; González-deSantos, L. M.

2018-05-01

During the last few years, there has been a huge methodological development regarding the automatic processing of 3D point cloud data acquired by both terrestrial and aerial mobile mapping systems, motivated by the improvement of surveying technologies and hardware performance. This paper presents a methodology that, in a first place, extracts geometric and semantic information regarding the road markings within the surveyed area from Mobile Laser Scanning (MLS) data, and then employs it to isolate street areas where pedestrian crossings are found and, therefore, pedestrians are more likely to cross the road. Then, different safety-related features can be extracted in order to offer information about the adequacy of the pedestrian crossing regarding its safety, which can be displayed in a Geographical Information System (GIS) layer. These features are defined in four different processing modules: Accessibility analysis, traffic lights classification, traffic signs classification, and visibility analysis. The validation of the proposed methodology has been carried out in two different cities in the northwest of Spain, obtaining both quantitative and qualitative results for pedestrian crossing classification and for each processing module of the safety assessment on pedestrian crossing environments.

Process-oriented integration and coordination of healthcare services across organizational boundaries.

PubMed

Tello-Leal, Edgar; Chiotti, Omar; Villarreal, Pablo David

2012-12-01

The paper presents a methodology that follows a top-down approach based on a Model-Driven Architecture for integrating and coordinating healthcare services through cross-organizational processes to enable organizations providing high quality healthcare services and continuous process improvements. The methodology provides a modeling language that enables organizations conceptualizing an integration agreement, and identifying and designing cross-organizational process models. These models are used for the automatic generation of: the private view of processes each organization should perform to fulfill its role in cross-organizational processes, and Colored Petri Net specifications to implement these processes. A multi-agent system platform provides agents able to interpret Colored Petri-Nets to enable the communication between the Healthcare Information Systems for executing the cross-organizational processes. Clinical documents are defined using the HL7 Clinical Document Architecture. This methodology guarantees that important requirements for healthcare services integration and coordination are fulfilled: interoperability between heterogeneous Healthcare Information Systems; ability to cope with changes in cross-organizational processes; guarantee of alignment between the integrated healthcare service solution defined at the organizational level and the solution defined at technological level; and the distributed execution of cross-organizational processes keeping the organizations autonomy.

Evaluating Cross-National Metrics of Tertiary Graduation Rates for OECD Countries: A Case for Increasing Methodological Congruence and Data Comparability

ERIC Educational Resources Information Center

Heuser, Brian L.; Drake, Timothy A.; Owens, Taya L.

2013-01-01

By examining the different methods and processes by which national data gathering agencies compile and submit their findings to the Organization for Economic Cooperation and Development (OECD), the authors (1) assess the methodological challenges of accurately reporting tertiary completion and graduation rates cross-nationally; (2) to examine the…

Safety assessment on pedestrian crossing environments using MLS data.

PubMed

Soilán, Mario; Riveiro, Belén; Sánchez-Rodríguez, Ana; Arias, Pedro

2018-02-01

In the framework of infrastructure analysis and maintenance in an urban environment, it is important to address the safety of every road user. This paper presents a methodology for the evaluation of several safety indicators on pedestrian crossing environments using geometric and radiometric information extracted from 3D point clouds collected by a Mobile Mapping System (MMS). The methodology is divided in four main modules which analyze the accessibility of the crossing area, the presence of traffic lights and traffic signs, and the visibility between a driver and a pedestrian on the proximities of a pedestrian crossing. The outputs of the analysis are exported to a Geographic Information System (GIS) where they are visualized and can be further processed in the context of city management. The methodology has been tested on approximately 30 pedestrian crossings in cluttered urban environments of two different cities. Results show that MMS are a valid mean to assess the safety of a specific urban environment, regarding its geometric conditions. Remarkable results are presented on traffic light classification, with a global F-score close to 95%. Copyright © 2017 Elsevier Ltd. All rights reserved.

Electron-Impact Ionization Cross Section Database

National Institute of Standards and Technology Data Gateway

SRD 107 Electron-Impact Ionization Cross Section Database (Web, free access)   This is a database primarily of total ionization cross sections of molecules by electron impact. The database also includes cross sections for a small number of atoms and energy distributions of ejected electrons for H, He, and H2. The cross sections were calculated using the Binary-Encounter-Bethe (BEB) model, which combines the Mott cross section with the high-incident energy behavior of the Bethe cross section. Selected experimental data are included.

Comparison of standing postural control and gait parameters in people with and without chronic low back pain: a cross-sectional case-control study.

PubMed

MacRae, Catharine Siân; Critchley, Duncan; Lewis, Jeremy S; Shortland, Adam

2018-01-01

Differences in postural control and gait have been identified between people with and without chronic low back pain (CLBP); however, many previous studies present data from small samples, or have used methodologies with questionable reliability. This study, employing robust methodology, hypothesised that there would be a difference in postural control, and spatiotemporal parameters of gait in people with CLBP compared with asymptomatic individuals. This cross-sectional case-control study age-matched and gender-matched 16 CLBP and 16 asymptomatic participants. Participants were assessed barefoot (1) standing, over three 40 s trials, under four posture challenging conditions (2) during gait. Primary outcome was postural stability (assessed by root mean squared error of centre of pressure (CoP) displacement (CoP RMSEAP ) and mean CoP velocity (CoP VELAP ), both in the anteroposterior direction); gait outcomes were hip range of movement and peak moments, walking speed, cadence and stride length, assessed using force plates and a motion analysis system. There were no differences between groups in CoP RMSEAP (P=0.26), or CoP VELAP (P=0.60) for any standing condition. During gait, no differences were observed between groups for spatiotemporal parameters, maximum, minimum and total ranges of hip movement, or peak hip flexor or extensor moments in the sagittal plane. In contrast to previous research, this study suggests that people with mild to moderate CLBP present with similar standing postural control, and parameters of gait to asymptomatic individuals. Treatments directed at influencing postural stability (eg, standing on a wobble board) or specific parameters of gait may be an unnecessary addition to a treatment programme.

Predictive validity evidence for medical education research study quality instrument scores: quality of submissions to JGIM's Medical Education Special Issue.

PubMed

Reed, Darcy A; Beckman, Thomas J; Wright, Scott M; Levine, Rachel B; Kern, David E; Cook, David A

2008-07-01

Deficiencies in medical education research quality are widely acknowledged. Content, internal structure, and criterion validity evidence support the use of the Medical Education Research Study Quality Instrument (MERSQI) to measure education research quality, but predictive validity evidence has not been explored. To describe the quality of manuscripts submitted to the 2008 Journal of General Internal Medicine (JGIM) medical education issue and determine whether MERSQI scores predict editorial decisions. Cross-sectional study of original, quantitative research studies submitted for publication. Study quality measured by MERSQI scores (possible range 5-18). Of 131 submitted manuscripts, 100 met inclusion criteria. The mean (SD) total MERSQI score was 9.6 (2.6), range 5-15.5. Most studies used single-group cross-sectional (54%) or pre-post designs (32%), were conducted at one institution (78%), and reported satisfaction or opinion outcomes (56%). Few (36%) reported validity evidence for evaluation instruments. A one-point increase in MERSQI score was associated with editorial decisions to send manuscripts for peer review versus reject without review (OR 1.31, 95%CI 1.07-1.61, p = 0.009) and to invite revisions after review versus reject after review (OR 1.29, 95%CI 1.05-1.58, p = 0.02). MERSQI scores predicted final acceptance versus rejection (OR 1.32; 95% CI 1.10-1.58, p = 0.003). The mean total MERSQI score of accepted manuscripts was significantly higher than rejected manuscripts (10.7 [2.5] versus 9.0 [2.4], p = 0.003). MERSQI scores predicted editorial decisions and identified areas of methodological strengths and weaknesses in submitted manuscripts. Researchers, reviewers, and editors might use this instrument as a measure of methodological quality.

Translation, cross-cultural adaptation and validation of an HIV/AIDS knowledge and attitudinal instrument.

PubMed

Zometa, Carlos S; Dedrick, Robert; Knox, Michael D; Westhoff, Wayne; Siri, Rodrigo Simán; Debaldo, Ann

2007-06-01

An instrument developed in the United States by the Centers for Disease Control and Prevention to assess HIV/AIDS knowledge and four attitudinal dimensions (Peer Pressure, Abstinence, Drug Use, and Threat of HIV Infection) and an instrument developed by Basen-Engquist et al. (1999) to measure abstinence and condom use were translated, cross-culturally adapted, and validated for use with Spanish-speaking high school students in El Salvador. A back-translation of the English version was cross-culturally adapted using two different review panels and pilot-tested with Salvadorian students. An expert panel established content validity, and confirmatory factor analysis provided support for construct validity. Results indicated that the methodology was successful in cross-culturally adapting the instrument developed by the Centers for Disease Control and Prevention and the instrument developed by Basen-Engquist et al. The psychometric properties of the knowledge section were acceptable and there was partial support for the four-factor attitudinal model underlying the CDC instrument and the two-factor model underlying the Basen-Engquist et al. instrument. Additional studies with Spanish-speaking populations (either in the United States or Latin America) are needed to evaluate the generalizability of the present results.

Reducing cross-sectional data using a genetic algorithm method and effects on cross-section geometry and steady-flow profiles

USGS Publications Warehouse

Berenbrock, Charles E.

2015-01-01

The effects of reduced cross-sectional data points on steady-flow profiles were also determined. Thirty-five cross sections of the original steady-flow model of the Kootenai River were used. These two methods were tested for all cross sections with each cross section resolution reduced to 10, 20 and 30 data points, that is, six tests were completed for each of the thirty-five cross sections. Generally, differences from the original water-surface elevation were smaller as the number of data points in reduced cross sections increased, but this was not always the case, especially in the braided reach. Differences were smaller for reduced cross sections developed by the genetic algorithm method than the standard algorithm method.

Relativistic Confinement Resonances

NASA Astrophysics Data System (ADS)

Keating, David; Manson, Steven; Deshmukh, Pranawa

2017-04-01

Photoionization of confined atoms in a C60 fullerene have been under intense investigation in the recent years, in particular the confinement induced resonances, termed confinement resonances. The effects of the C60 potential are modeled by a static spherical well, with (in atomic units) inner radius r0 = 5.8, width Δ = 1.9, and depth U0 = -0.302, which is reasonable in the energy region well above the C60 plasmons. At very high Z, relativistic interactions become important contributors to even the qualitative nature of atomic properties; this is true for confined atomic properties as well. To explore the extent of these interactions, a theoretical study of several heavy atoms has been performed using the relativistic random phase approximation (RRPA) methodology. In order to determine which features in the photoionization cross section are due to relativity, calculations using the (nonrelativistic) random phase approximation with exchange method (RPAE) are performed for comparison. The existence of the second subshell of the spin-orbit-split doublets can induce new confinement resonances in the total cross section, which is the sum of the spin-orbit-split doublets, due to the shift in the doublet's threshold. Several examples for confined high-Z atoms are presented. Work supported by DOE and NSF.

Bibliometric study of articles published in a Brazilian journal of pediatric dentistry.

PubMed

Poletto, Vanessa Ceolin; Faraco Junior, Italo Medeiros

2010-01-01

This cross-sectional study aimed at evaluating the abstracts of all articles published in the 'Jornal Brasileiro de Odontopediatria e Odontologia do Bebê' in order to collect data on the study design used, the most researched topics and the Brazilian states with the highest scientific production. Copies were made of the abstracts of each article, totaling 572 abstracts. Data categorization was done by two trained and independent reviewers. The results showed that the most used study design were case report (33%) and cross-sectional study (30%). On the other hand, there were only 2.5% of randomized clinical trials and no systematic review or meta-analysis. The most researched topics were cariology (15%) and restorative dentistry / dental materials (10%). The state with the greatest number of publications was São Paulo (40%), followed by Rio de Janeiro (17%). It was concluded that the majority of the articles published referred to studies with a low potential to establish scientific evidence, indicating a need for conducting research based on better quality methodology. Moreover, it was found that the assessed literature reflected the trends observed in the clinical practice of Pediatric Dentistry in Brazil.

Spoof surface plasmon based planar antennas for the realization of Terahertz hotspots

PubMed Central

Zhang, Yusheng; Han, Zhanghua

2015-01-01

Novel spoof surface plasmon based terahertz (THz) antennas are realized using a few number of rectangular grooves perforated in ultrathin metal stripes and the properties of them, including both scattering cross sections and field enhancement, are numerically analyzed. The dependence of these properties on the incident angle and groove number is discussed and the results show that sharp resonances in scattering cross section spectra associated with strong local field enhancement can be achieved. These resonances are due to the formation of Fabry-Perot resonances of the spoof surface plasmon mode and it is found that the order of resonance exhibiting strongest field enhancements is found to coincide with the number of grooves at normal incidence, due to hybridization of the antenna resonance with the individual groove resonance. The terahertz hotspots within the grooves at resonances due to the local field enhancement may open up new possibilities for the investigation of terahertz-matter interactions and boost a variety of THz applications including novel sensing and THz detections. The planar stripe antennas with sharper resonances than dipolar-like resonances, together with their ease of fabrication may also promise new design methodology for metamaterials. PMID:26691003

Training practitioners in preparing systematic reviews: a cross-sectional survey of participants in the Australasian Cochrane Centre training program

PubMed Central

Piehl, Janet H; Green, Sally; Silagy, Chris

2002-01-01

Background Although systematic reviews of health care interventions are an invaluable tool for health care providers and researchers, many potential authors never publish reviews. This study attempts to determine why some people with interest in performing systematic reviews do not subsequently publish a review; and what steps could possibly increase review completion. Methods Cross-sectional survey by email and facsimile of the 179 participants in Australasian Cochrane Centre training events between 1998 and 2000. Results Ninety-two participants responded to the survey (51 percent). Response rate of deliverable surveys was 82 percent (92/112). The remainder of the participants had invalid or no contact information on file. More than 75 percent of respondents felt that the current workshops met their needs for training. The most critical barriers to completion of a Cochrane review were: lack of time (80 percent), lack of financial support (36 percent), methodological problems (23 percent) and problems with group dynamics (10 percent). Conclusions Strategies to protect reviewer time and increase the efficiency of the review process may increase the numbers of trained reviewers completing a systematic review. PMID:12057022

About the Effect of Control on Flutter and Post-Flutter of a Supersonic/Hypersonic Cross-Sectional Wing

NASA Technical Reports Server (NTRS)

Silva, Walter A.; Librescu, Liviu; Marzocca, Piergiovanni

2001-01-01

The control of the flutter instability and the conversion of the dangerous character of the flutter instability boundary into the undangerous one of a cross-sectional wing in a supersonic/hypersonic flow field is presented. The objective of this paper is twofold: i) to analyze the implications of nonlinear unsteady aerodynamics and physical nonlinearities on the character of the instability boundary in the presence of a control capability, and ii) to outline the effects played in the same respect by some important parameters of the aeroelastic system. As a by-product of this analysis, the implications of the active control on the linearized flutter behavior of the system are captured and emphasized. The bifurcation behavior of the open/closed loop aeroelastic system in the vicinity of the flutter boundary is studied via the use of a new methodology based on the Liapunov First Quantity. The expected outcome of this study is: a) to greatly enhance the scope and reliability of the aeroelastic analysis and design criteria of advanced supersonic/hypersonic flight vehicles and, b) provide a theoretical basis for the analysis of more complex nonlinear aeroelastic systems.

About the Effect of Control on Flutter and Post-Flutter of a Supersonic/Hypersonic Cross-Sectional Wing

NASA Technical Reports Server (NTRS)

Marzocca, Piergiovanni; Librescu, Liviu; Silva, Walter A.

2000-01-01

The control of the flutter instability and the conversion of the dangerous character of the flutter instability boundary into the undangerous one of a cross-sectional wing in a supersonic/hypersonic flow field is presented. The objective of this paper is twofold: i) to analyze the implications of nonlinear unsteady aerodynamics and physical nonlinearities on the character of the instability boundary in the presence of a control capability, and ii) to outline the effects played in the same respect by some important parameters of the aeroelastic system. As a by-product of this analysis, the implications of the active control on the linearized flutter behavior of the system are captured and emphasized. The bifurcation behavior of the open/closed loop aeroelastic system in the vicinity of the flutter boundary is studied via the use of a new methodology based on the Liapunov First Quantity. The expected outcome of this study is: a) to greatly enhance the scope and reliability of the aeroelastic analysis and design criteria of advanced supersonic/hypersonic flight vehicles and, b) provide a theoretical basis for the analysis of more complex nonlinear aeroelastic systems.

Gender Discrimination among Medical Students in Pakistan: A Cross Sectional Survey

PubMed Central

Madeeh Hashmi, Ali; Rehman, Amra; Butt, Zeeshan; Awais Aftab, Muhammad; Shahid, Aimen; Abbas Khan, Sahar

2013-01-01

Objective: To examine the prevalence and magnitude of gender discrimination experienced by undergraduate medical students, and its repercussions on their academic performance and emotional health. Methodology: A cross sectional study of 500 medical and dental students studying at a private medical college in Lahore, Pakistan. Results: Majority (78%) of students reported being victims of gender discrimination. Females were the main perpetrators (70.8%).Most common forms were denied opportunities (63%), followed by neglecting students’ needs (44.3%), and unethical talk (43.6%). Most common places of gender discrimination were teachers’ offices (43.7%) and lecture halls (37.2%). Most of the perpetrators were clerical staff (48%) and professors (43%).Gender discrimination did not affect the academic performance of most victims (62.6%). The most common emotional responses were anger (57.6%), frustration (46.7%) and helplessness (40.3%). 52.4% of students said that gender discrimination still continues and the majority (83.3%) did not report the problem to college authorities. Conclusions: Results demonstrate that gender discrimination is widely prevalent in undergraduate medical education. Females are both the main victims as well as the main perpetrators. In most cases gender discrimination does not affect academic performance but does cause emotional distress. PMID:24353554

Technical Data to Justify Full Burnup Credit in Criticality Safety Licensing Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Enercon Services, Inc.

2011-03-14

Enercon Services, Inc. (ENERCON) was requested under Task Order No.2 to identify scientific and technical data needed to benchmark and justify Full Burnup Credit, which adds 16 fission products and 4 minor actinides1 to Actinide-Only burnup credit. The historical perspective for Full Burnup Credit is discussed, and interviews of organizations participating in burnup credit activities are summarized as a basis for identifying additional data needs and making recommendation. Input from burnup credit participants representing two segments of the commercial nuclear industry is provided. First, the Electric Power Research Institute (EPRI) has been very active in the development of Full Burnupmore » Credit, representing the interests of nuclear utilities in achieving capacity gains for storage and transport casks. EPRI and its utility customers are interested in a swift resolution of the validation issues that are delaying the implementation of Full Burnup Credit [EPRI 2010b]. Second, used nuclear fuel storage and transportation Cask Vendors favor improving burnup credit beyond Actinide-Only burnup credit, although their discussion of specific burnup credit achievements and data needs was limited citing business sensitive and technical proprietary concerns. While Cask Vendor proprietary items are not specifically identified in this report, the needs of all nuclear industry participants are reflected in the conclusions and recommendations of this report. In addition, Oak Ridge National Laboratory (ORNL) and Sandia National Laboratory (SNL) were interviewed for their input into additional data needs to achieve Full Burnup Credit. ORNL was very open to discussions of Full Burnup Credit, with several telecoms and a visit by ENERCON to ORNL. For many years, ORNL has provided extensive support to the NRC regarding burnup credit in all of its forms. Discussions with ORNL focused on potential resolutions to the validation issues for the use of fission products. SNL was helpful in ENERCON's understanding of the difficult issues related to obtaining and analyzing additional cross section test data to support Full Burnup Credit. A PIRT (Phenomena Identification and Ranking Table) analysis was performed by ENERCON to evaluate the costs and benefits of acquiring different types of nuclear data in support of Full Burnup Credit. A PIRT exercise is a formal expert elicitation process with the final output being the ranking tables. The PIRT analysis (Table 7-4: Results of PIRT Evaluation) showed that the acquisition of additional Actinide-Only experimental data, although beneficial, was associated with high cost and is not necessarily needed. The conclusion was that the existing Radiochemical Assay (RCA) data plus the French Haut Taux de Combustion (HTC)2 and handbook Laboratory Critical Experiment (LCE) data provide adequate benchmark validation for Actinide-Only Burnup Credit. The PIRT analysis indicated that the costs and schedule to obtain sufficient additional experimental data to support the addition of 16 fission products to Actinide-Only Burnup Credit to produce Full Burnup Credit are quite substantial. ENERCON estimates the cost to be $50M to $100M with a schedule of five or more years. The PIRT analysis highlights another option for fission product burnup credit, which is the application of computer-based uncertainty analyses (S/U - Sensitivity/Uncertainty methodologies), confirmed by the limited experimental data that is already available. S/U analyses essentially transform cross section uncertainty information contained in the cross section libraries into a reactivity bias and uncertainty. Recent work by ORNL and EPRI has shown that a methodology to support Full Burnup Credit is possible using a combination of traditional RCA and LCE validation plus S/U validation for fission product isotopics and cross sections. Further, the most recent cross section data (ENDF/B-VII) can be incorporated into the burnup credit codes at a reasonable cost compared to the acquisition of equivalent experimental data. ENERCON concludes that even with the costs of code data library updating, the use of S/U analysis methodologies could be accomplished on a shorter schedule and a lower cost than the gathering of sufficient experimental data. ENERCON estimates of the costs of an updated S/U computer code and data suite are $5M to $10M with a schedule of two to three years. Recent ORNL analyses using the S/U analysis method show that the bias and uncertainty values for fission product cross sections are smaller than previously expected. This result is confirmed by a similar EPRI approach using different data and computer codes. ENERCON also found that some issues regarding the implementation of burnup credit appear to have been successfully resolved especially the axial burnup profile issue and the depletion parameter issue. These issues were resolved through data gathering activities at the Yucca Mountain Project and ORNL.« less

On the importance of methods in hydrological modelling. Perspectives from a case study

NASA Astrophysics Data System (ADS)

Fenicia, Fabrizio; Kavetski, Dmitri

2017-04-01

The hydrological community generally appreciates that developing any non-trivial hydrological model requires a multitude of modelling choices. These choices may range from a (seemingly) straightforward application of mass conservation, to the (often) guesswork-like selection of constitutive functions, parameter values, etc. The application of a model itself requires a myriad of methodological choices - the selection of numerical solvers, objective functions for model calibration, validation approaches, performance metrics, etc. Not unreasonably, hydrologists embarking on ever ambitious projects prioritize hydrological insight over the morass of methodological choices. Perhaps to emphasize "ideas" over "methods", some journals have even reduced the fontsize of the methodology sections of its articles. However, the very nature of modelling is that seemingly routine methodological choices can significantly affect the conclusions of case studies and investigations - making it dangerous to skimp over methodological details in an enthusiastic rush towards the next great hydrological idea. This talk shares modelling insights from a hydrological study of a 300 km2 catchment in Luxembourg, where the diversity of hydrograph dynamics observed at 10 locations begs the question of whether external forcings or internal catchment properties act as dominant controls on streamflow generation. The hydrological insights are fascinating (at least to us), but in this talk we emphasize the impact of modelling methodology on case study conclusions and recommendations. How did we construct our prior set of hydrological model hypotheses? What numerical solver was implemented and why was an objective function based on Bayesian theory deployed? And what would have happened had we omitted model cross-validation, or not used a systematic hypothesis testing approach?

Experiments on Antiprotons: Antiproton-Nucleon Cross Sections

DOE R&D Accomplishments Database

Chamberlain, Owen; Keller, Donald V.; Mermond, Ronald; Segre, Emilio; Steiner, Herbert M.; Ypsilantis, Tom

1957-07-22

In this paper experiments are reported on annihilation and scattering of antiprotons in H{sub 2}O , D{sub 2}O, and O{sub 2}. From the data measured it is possible to obtain an antiproton-proton and an antiproton-deuteron cross section at 457 Mev (lab). Further analysis gives the p-p and p-n cross sections as 104 mb for the p-p reaction cross section and 113 mb for the p-n reaction cross section. The respective annihilation cross sections are 89 and 74 mb. The Glauber correction necessary in order to pass from the p-d to the p-n cross section by subtraction of the p-p cross section is unfortunately large and somewhat uncertain. The data are compared with the p-p and p-n cross sections and with other results on p-p collisions.

The Methodology of Magpies

ERIC Educational Resources Information Center

Carter, Susan

2014-01-01

Arts/Humanities researchers frequently do not explain methodology overtly; instead, they "perform" it through their use of language, textual and historic cross-reference, and theory. Here, methodologies from literary studies are shown to add to Higher Education (HE) an exegetical and critically pluralist approach. This includes…

Development of a Valid and Reliable Knee Articular Cartilage Condition-Specific Study Methodological Quality Score.

PubMed

Harris, Joshua D; Erickson, Brandon J; Cvetanovich, Gregory L; Abrams, Geoffrey D; McCormick, Frank M; Gupta, Anil K; Verma, Nikhil N; Bach, Bernard R; Cole, Brian J

2014-02-01

Condition-specific questionnaires are important components in evaluation of outcomes of surgical interventions. No condition-specific study methodological quality questionnaire exists for evaluation of outcomes of articular cartilage surgery in the knee. To develop a reliable and valid knee articular cartilage-specific study methodological quality questionnaire. Cross-sectional study. A stepwise, a priori-designed framework was created for development of a novel questionnaire. Relevant items to the topic were identified and extracted from a recent systematic review of 194 investigations of knee articular cartilage surgery. In addition, relevant items from existing generic study methodological quality questionnaires were identified. Items for a preliminary questionnaire were generated. Redundant and irrelevant items were eliminated, and acceptable items modified. The instrument was pretested and items weighed. The instrument, the MARK score (Methodological quality of ARticular cartilage studies of the Knee), was tested for validity (criterion validity) and reliability (inter- and intraobserver). A 19-item, 3-domain MARK score was developed. The 100-point scale score demonstrated face validity (focus group of 8 orthopaedic surgeons) and criterion validity (strong correlation to Cochrane Quality Assessment score and Modified Coleman Methodology Score). Interobserver reliability for the overall score was good (intraclass correlation coefficient [ICC], 0.842), and for all individual items of the MARK score, acceptable to perfect (ICC, 0.70-1.000). Intraobserver reliability ICC assessed over a 3-week interval was strong for 2 reviewers (≥0.90). The MARK score is a valid and reliable knee articular cartilage condition-specific study methodological quality instrument. This condition-specific questionnaire may be used to evaluate the quality of studies reporting outcomes of articular cartilage surgery in the knee.

Study of BenW (n = 1-12) clusters: An electron collision perspective

NASA Astrophysics Data System (ADS)

Modak, Paresh; Kaur, Jaspreet; Antony, Bobby

2017-08-01

This article explores electron scattering cross sections by Beryllium-Tungsten clusters (BenW). Beryllium and tungsten are important elements for plasma facing wall components, especially for the deuterium/tritium phase of ITER and in the recently installed JET. The present study focuses on different electron impact interactions in terms of elastic cross section (Qel), inelastic cross section (Qinel), ionization cross section (Qion), and momentum transfer cross section (Qmtcs) for the first twelve clusters belonging to the BenW family. It also predicts the evolution of the cross section with the size of the cluster. These cross sections are used as an input to model processes in plasma. The ionization cross section presented here is compared with the available reported data. This is the first comprehensive report on cross section data for all the above-mentioned scattering channels, to the best of our knowledge. Such broad analysis of cross section data gives vital insight into the study of local chemistry of electron interactions with BenW (n = 1-12) clusters in plasma.

Averaging cross section data so we can fit it

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brown, D.

2014-10-23

The 56Fe cross section we are interested in have a lot of fluctuations. We would like to fit the average of the cross section with cross sections calculated within EMPIRE. EMPIRE is a Hauser-Feshbach theory based nuclear reaction code, requires cross sections to be smoothed using a Lorentzian profile. The plan is to fit EMPIRE to these cross sections in the fast region (say above 500 keV).

New cross sections for H on H2 collisional transitions

NASA Astrophysics Data System (ADS)

Zou, Qianxia

2011-12-01

The cross section for H on H2 collisions is important for astrophysics as well as our understanding of the simple chemical systems. This is the simplest atom-molecule cross section. With a new H3 potential surface by Mielke et al., we have modified the ABC code by Skouteris, Castillo and Manolopoulos to calculate new cross sections. These cross sections are compared to previous cross section calculations.

Musculoskeletal impairment survey in Rwanda: Design of survey tool, survey methodology, and results of the pilot study (a cross sectional survey)

PubMed Central

Atijosan, Oluwarantimi; Kuper, Hannah; Rischewski, Dorothea; Simms, Victoria; Lavy, Christopher

2007-01-01

Background Musculoskeletal impairment (MSI) is an important cause of morbidity and mortality worldwide, especially in developing countries. Prevalence studies for MSI in the developing world have used varying methodologies and are seldom directly comparable. This study aimed to develop a new tool to screen for and diagnose MSI and to pilot test the methodology for a national survey in Rwanda. Methods A 7 question screening tool to identify cases of MSI was developed through literature review and discussions with healthcare professionals. To validate the tool, trained rehabilitation technicians screened 93 previously identified gold standard 'cases' and 86 'non cases'. Sensitivity, specificity and positive predictive value were calculated. A standardised examination protocol was developed to determine the aetiology and diagnosis of MSI for those who fail the screening test. For the national survey in Rwanda, multistage cluster random sampling, with probability proportional to size procedures will be used for selection of a cross-sectional, nationally representative sample of the population. Households to be surveyed will be chosen through compact segment sampling and all individuals within chosen households will be screened. A pilot survey of 680 individuals was conducted using the protocol. Results: The screening tool demonstrated 99% sensitivity and 97% specificity for MSI, and a positive predictive value of 98%. During the pilot study 468 out of 680 eligible subjects (69%) were screened. 45 diagnoses were identified in 38 persons who were cases of MSI. The subjects were grouped into categories based on diagnostic subgroups of congenital (1), traumatic (17), infective (2) neurological (6) and other acquired(19). They were also separated into mild (42.1%), moderate (42.1%) and severe (15.8%) cases, using an operational definition derived from the World Health Organisation's International Classification of Functioning, Disability and Health. Conclusion: The screening tool had good sensitivity and specificity and was appropriate for use in a national survey. The pilot study showed that the survey protocol was appropriate for measuring the prevalence of MSI in Rwanda. This survey is an important step to building a sound epidemiological understanding of MSI, to enable appropriate health service planning. PMID:17391509

Topology synthesis and size optimization of morphing wing structures

NASA Astrophysics Data System (ADS)

Inoyama, Daisaku

This research demonstrates a novel topology and size optimization methodology for synthesis of distributed actuation systems with specific applications to morphing air vehicle structures. The main emphasis is placed on the topology and size optimization problem formulations and the development of computational modeling concepts. The analysis model is developed to meet several important criteria: It must allow a rigid-body displacement, as well as a variation in planform area, with minimum strain on structural members while retaining acceptable numerical stability for finite element analysis. Topology optimization is performed on a semi-ground structure with design variables that control the system configuration. In effect, the optimization process assigns morphing members as "soft" elements, non-morphing load-bearing members as "stiff' elements, and non-existent members as "voids." The optimization process also determines the optimum actuator placement, where each actuator is represented computationally by equal and opposite nodal forces with soft axial stiffness. In addition, the configuration of attachments that connect the morphing structure to a non-morphing structure is determined simultaneously. Several different optimization problem formulations are investigated to understand their potential benefits in solution quality, as well as meaningfulness of the formulations. Extensions and enhancements to the initial concept and problem formulations are made to accommodate multiple-configuration definitions. In addition, the principal issues on the external-load dependency and the reversibility of a design, as well as the appropriate selection of a reference configuration, are addressed in the research. The methodology to control actuator distributions and concentrations is also discussed. Finally, the strategy to transfer the topology solution to the sizing optimization is developed and cross-sectional areas of existent structural members are optimized under applied aerodynamic loads. That is, the optimization process is implemented in sequential order: The actuation system layout is first determined through multi-disciplinary topology optimization process, and then the thickness or cross-sectional area of each existent member is optimized under given constraints and boundary conditions. Sample problems are solved to demonstrate the potential capabilities of the presented methodology. The research demonstrates an innovative structural design procedure from a computational perspective and opens new insights into the potential design requirements and characteristics of morphing structures.

Methodological factors conducting research with incarcerated persons with diabetes.

PubMed

Reagan, Louise; Shelton, Deborah

2016-02-01

The aim of this study was to describe methodological issues specific to conducting research with incarcerated vulnerable populations who have diabetes. Much has been written about the ethical and logistical challenges of conducting research with vulnerable incarcerated populations. However, conducting research with incarcerated persons with diabetes is associated with additional issues related to research design, measurement, sampling and recruitment, and data collection procedures. A cross-sectional study examining the relationships of diabetes knowledge, illness representation and self-care behaviors with glycemic control in 124 incarcerated persons was conducted and serves as the basis for describing methodological factors for the conduct of research with an incarcerated population with diabetes. Within this incarcerated population with diabetes, sampling bias due to gender inequity, recruitment of participants not using insulin, self-reported vision impairment, and a lack of standardized instruments especially for measuring diabetes self-care were methodological challenges. Clinical factors that serve as potential barriers for study conduct were identified as risk for hypoglycemia due to insulin timing and other activities. Conducting research with incarcerated persons diagnosed with diabetes requires attention to a set of methodological concerns above and beyond that of the ethical and legal regulations for protecting the rights of this vulnerable population. To increase opportunities for conducting rigorous as well as facility- and patient-friendly research, researchers need to blend their knowledge of diabetes with an understanding of prison rules and routines. Copyright © 2015 Elsevier Inc. All rights reserved.

The evaluation of reflective learning from the nursing student's point of view: A mixed method approach.

PubMed

Fernández-Peña, Rosario; Fuentes-Pumarola, Concepció; Malagón-Aguilera, M Carme; Bonmatí-Tomàs, Anna; Bosch-Farré, Cristina; Ballester-Ferrando, David

2016-09-01

Adapting university programmes to European Higher Education Area criteria has required substantial changes in curricula and teaching methodologies. Reflective learning (RL) has attracted growing interest and occupies an important place in the scientific literature on theoretical and methodological aspects of university instruction. However, fewer studies have focused on evaluating the RL methodology from the point of view of nursing students. To assess nursing students' perceptions of the usefulness and challenges of RL methodology. Mixed method design, using a cross-sectional questionnaire and focus group discussion. The research was conducted via self-reported reflective learning questionnaire complemented by focus group discussion. Students provided a positive overall evaluation of RL, highlighting the method's capacity to help them better understand themselves, engage in self-reflection about the learning process, optimize their strengths and discover additional training needs, along with searching for continuous improvement. Nonetheless, RL does not help them as much to plan their learning or identify areas of weakness or needed improvement in knowledge, skills and attitudes. Among the difficulties or challenges, students reported low motivation and lack of familiarity with this type of learning, along with concerns about the privacy of their reflective journals and about the grading criteria. In general, students evaluated RL positively. The results suggest areas of needed improvement related to unfamiliarity with the methodology, ethical aspects of developing a reflective journal and the need for clear evaluation criteria. Copyright © 2016 Elsevier Ltd. All rights reserved.

A computer program for analyzing channel geometry

USGS Publications Warehouse

Regan, R.S.; Schaffranek, R.W.

1985-01-01

The Channel Geometry Analysis Program (CGAP) provides the capability to process, analyze, and format cross-sectional data for input to flow/transport simulation models or other computational programs. CGAP allows for a variety of cross-sectional data input formats through use of variable format specification. The program accepts data from various computer media and provides for modification of machine-stored parameter values. CGAP has been devised to provide a rapid and efficient means of computing and analyzing the physical properties of an open-channel reach defined by a sequence of cross sections. CGAP 's 16 options provide a wide range of methods by which to analyze and depict a channel reach and its individual cross-sectional properties. The primary function of the program is to compute the area, width, wetted perimeter, and hydraulic radius of cross sections at successive increments of water surface elevation (stage) from data that consist of coordinate pairs of cross-channel distances and land surface or channel bottom elevations. Longitudinal rates-of-change of cross-sectional properties are also computed, as are the mean properties of a channel reach. Output products include tabular lists of cross-sectional area, channel width, wetted perimeter, hydraulic radius, average depth, and cross-sectional symmetry computed as functions of stage; plots of cross sections; plots of cross-sectional area and (or) channel width as functions of stage; tabular lists of cross-sectional area and channel width computed as functions of stage for subdivisions of a cross section; plots of cross sections in isometric projection; and plots of cross-sectional area at a fixed stage as a function of longitudinal distance along an open-channel reach. A Command Procedure Language program and Job Control Language procedure exist to facilitate program execution on the U.S. Geological Survey Prime and Amdahl computer systems respectively. (Lantz-PTT)

FDAAA legislation is working, but methodological flaws undermine the reliability of clinical trials: a cross-sectional study.

PubMed

Marin Dos Santos, Douglas H; Atallah, Álvaro N

2015-01-01

The relationship between clinical research and the pharmaceutical industry has placed clinical trials in jeopardy. According to the medical literature, more than 70% of clinical trials are industry-funded. Many of these trials remain unpublished or have methodological flaws that distort their results. In 2007, it was signed into law the Food and Drug Administration Amendments Act (FDAAA), aiming to provide publicly access to a broad range of biomedical information to be made available on the platform ClinicalTrials (available at https://www.clinicaltrials.gov). We accessed ClinicalTrials.gov and evaluated the compliance of researchers and sponsors with the FDAAA. Our sample comprised 243 protocols of clinical trials of biological monoclonal antibodies (mAb) adalimumab, bevacizumab, infliximab, rituximab, and trastuzumab. We demonstrate that the new legislation has positively affected transparency patterns in clinical research, through a significant increase in publication and online reporting rates after the enactment of the law. Poorly designed trials, however, remain a challenge to be overcome, due to a high prevalence of methodological flaws. These flaws affect the quality of clinical information available, breaching ethical duties of sponsors and researchers, as well as the human right to health.

FDAAA legislation is working, but methodological flaws undermine the reliability of clinical trials: a cross-sectional study

PubMed Central

Atallah, Álvaro N.

2015-01-01

The relationship between clinical research and the pharmaceutical industry has placed clinical trials in jeopardy. According to the medical literature, more than 70% of clinical trials are industry-funded. Many of these trials remain unpublished or have methodological flaws that distort their results. In 2007, it was signed into law the Food and Drug Administration Amendments Act (FDAAA), aiming to provide publicly access to a broad range of biomedical information to be made available on the platform ClinicalTrials (available at https://www.clinicaltrials.gov). We accessed ClinicalTrials.gov and evaluated the compliance of researchers and sponsors with the FDAAA. Our sample comprised 243 protocols of clinical trials of biological monoclonal antibodies (mAb) adalimumab, bevacizumab, infliximab, rituximab, and trastuzumab. We demonstrate that the new legislation has positively affected transparency patterns in clinical research, through a significant increase in publication and online reporting rates after the enactment of the law. Poorly designed trials, however, remain a challenge to be overcome, due to a high prevalence of methodological flaws. These flaws affect the quality of clinical information available, breaching ethical duties of sponsors and researchers, as well as the human right to health. PMID:26131374

Multistrand superconductor cable

DOEpatents

Borden, A.R.

1984-03-08

Improved multistrand Rutherford-type superconductor cable is produced by using strands which are preformed, prior to being wound into the cable, so that each strand has a variable cross section, with successive portions having a substantially round cross section, a transitional oval cross section, a rectangular cross section, a transitional oval cross section, a round cross section and so forth, in repetitive cycles along the length of the strand. The cable is wound and flattened so that the portions of rectangular cross section extend across the two flat sides of the cable at the strand angle. The portions of round cross section are bent at the edges of the flattened cable, so as to extend between the two flat sides. The rectangular portions of the strands slide easil

A New Methodology of Spatial Cross-Correlation Analysis

PubMed Central

Chen, Yanguang

2015-01-01

Spatial correlation modeling comprises both spatial autocorrelation and spatial cross-correlation processes. The spatial autocorrelation theory has been well-developed. It is necessary to advance the method of spatial cross-correlation analysis to supplement the autocorrelation analysis. This paper presents a set of models and analytical procedures for spatial cross-correlation analysis. By analogy with Moran’s index newly expressed in a spatial quadratic form, a theoretical framework is derived for geographical cross-correlation modeling. First, two sets of spatial cross-correlation coefficients are defined, including a global spatial cross-correlation coefficient and local spatial cross-correlation coefficients. Second, a pair of scatterplots of spatial cross-correlation is proposed, and the plots can be used to visually reveal the causality behind spatial systems. Based on the global cross-correlation coefficient, Pearson’s correlation coefficient can be decomposed into two parts: direct correlation (partial correlation) and indirect correlation (spatial cross-correlation). As an example, the methodology is applied to the relationships between China’s urbanization and economic development to illustrate how to model spatial cross-correlation phenomena. This study is an introduction to developing the theory of spatial cross-correlation, and future geographical spatial analysis might benefit from these models and indexes. PMID:25993120

A new methodology of spatial cross-correlation analysis.

PubMed

Chen, Yanguang

2015-01-01

Spatial correlation modeling comprises both spatial autocorrelation and spatial cross-correlation processes. The spatial autocorrelation theory has been well-developed. It is necessary to advance the method of spatial cross-correlation analysis to supplement the autocorrelation analysis. This paper presents a set of models and analytical procedures for spatial cross-correlation analysis. By analogy with Moran's index newly expressed in a spatial quadratic form, a theoretical framework is derived for geographical cross-correlation modeling. First, two sets of spatial cross-correlation coefficients are defined, including a global spatial cross-correlation coefficient and local spatial cross-correlation coefficients. Second, a pair of scatterplots of spatial cross-correlation is proposed, and the plots can be used to visually reveal the causality behind spatial systems. Based on the global cross-correlation coefficient, Pearson's correlation coefficient can be decomposed into two parts: direct correlation (partial correlation) and indirect correlation (spatial cross-correlation). As an example, the methodology is applied to the relationships between China's urbanization and economic development to illustrate how to model spatial cross-correlation phenomena. This study is an introduction to developing the theory of spatial cross-correlation, and future geographical spatial analysis might benefit from these models and indexes.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Prinja, A. K.

The Karhunen-Loeve stochastic spectral expansion of a random binary mixture of immiscible fluids in planar geometry is used to explore asymptotic limits of radiation transport in such mixtures. Under appropriate scalings of mixing parameters - correlation length, volume fraction, and material cross sections - and employing multiple- scale expansion of the angular flux, previously established atomic mix and diffusion limits are reproduced. When applied to highly contrasting material properties in the small cor- relation length limit, the methodology yields a nonstandard reflective medium transport equation that merits further investigation. Finally, a hybrid closure is proposed that produces both small andmore » large correlation length limits of the closure condition for the material averaged equations.« less

Implementation of structural response sensitivity calculations in a large-scale finite-element analysis system

NASA Technical Reports Server (NTRS)

Giles, G. L.; Rogers, J. L., Jr.

1982-01-01

The methodology used to implement structural sensitivity calculations into a major, general-purpose finite-element analysis system (SPAR) is described. This implementation includes a generalized method for specifying element cross-sectional dimensions as design variables that can be used in analytically calculating derivatives of output quantities from static stress, vibration, and buckling analyses for both membrane and bending elements. Limited sample results for static displacements and stresses are presented to indicate the advantages of analytically calculating response derivatives compared to finite difference methods. Continuing developments to implement these procedures into an enhanced version of SPAR are also discussed.

Ion dipole capture cross sections at low ion and rotational energies - Comparison of integrated capture cross sections with reaction cross sections for NH3 and H2O parent-ion collisions.

NASA Technical Reports Server (NTRS)

Dugan, J. V., Jr.; Canright, R. B., Jr.

1972-01-01

The numerical capture cross section is calculated from the capture ratio, defined as the fraction of trajectories reaching a prescribed minimum separation of 3 A. The calculated capture cross sections for a rotational temperature of 77 K suggest large reaction cross sections in 80 K experiments for the large dipole-moment target, methyl cyanide.

Deterministic Modeling of the High Temperature Test Reactor with DRAGON-HEXPEDITE

DOE Office of Scientific and Technical Information (OSTI.GOV)

J. Ortensi; M.A. Pope; R.M. Ferrer

2010-10-01

The Idaho National Laboratory (INL) is tasked with the development of reactor physics analysis capability of the Next Generation Nuclear Power (NGNP) project. In order to examine the INL’s current prismatic reactor analysis tools, the project is conducting a benchmark exercise based on modeling the High Temperature Test Reactor (HTTR). This exercise entails the development of a model for the initial criticality, a 19 fuel column thin annular core, and the fully loaded core critical condition with 30 fuel columns. Special emphasis is devoted to physical phenomena and artifacts in HTTR that are similar to phenomena and artifacts in themore » NGNP base design. The DRAGON code is used in this study since it offers significant ease and versatility in modeling prismatic designs. DRAGON can generate transport solutions via Collision Probability (CP), Method of Characteristics (MOC) and Discrete Ordinates (Sn). A fine group cross-section library based on the SHEM 281 energy structure is used in the DRAGON calculations. The results from this study show reasonable agreement in the calculation of the core multiplication factor with the MC methods, but a consistent bias of 2–3% with the experimental values is obtained. This systematic error has also been observed in other HTTR benchmark efforts and is well documented in the literature. The ENDF/B VII graphite and U235 cross sections appear to be the main source of the error. The isothermal temperature coefficients calculated with the fully loaded core configuration agree well with other benchmark participants but are 40% higher than the experimental values. This discrepancy with the measurement partially stems from the fact that during the experiments the control rods were adjusted to maintain criticality, whereas in the model, the rod positions were fixed. In addition, this work includes a brief study of a cross section generation approach that seeks to decouple the domain in order to account for neighbor effects. This spectral interpenetration is a dominant effect in annular HTR physics. This analysis methodology should be further explored in order to reduce the error that is systematically propagated in the traditional generation of cross sections.« less

Sex- and age-related differences in mid-thigh composition and muscle quality determined by computed tomography in middle-aged and elderly Japanese.

PubMed

Kasai, Takehiro; Ishiguro, Naoki; Matsui, Yasumoto; Harada, Atsushi; Takemura, Marie; Yuki, Atsumu; Kato, Yuki; Otsuka, Rei; Ando, Fujiko; Shimokata, Hiroshi

2015-06-01

Sex- and age-related differences in mid-thigh composition and muscle quality remain unclear. The present study aimed to clarify these differences using computed tomography in middle-aged and elderly Japanese. A total of 2310 participants (age 40-89 years), who were randomly selected from the local residents, underwent computed tomography examination of the right mid-thigh. Thigh circumference and cross-sectional areas of the thigh, muscle, quadriceps, non-quadriceps, fat, and bone were measured. Knee extension strength and muscle quality index (knee extension strength/quadriceps cross-sectional area) were also assessed. Sex- and age-related differences in these indices were analyzed. The thigh cross-sectional area in men and women decreased by 0.6% and 0.5%/year, respectively, because of a decrease in muscle cross-sectional area (men 75.2%, women 40.6%), fat cross-sectional area (men 24.4%, women 59.6%) and bone cross-sectional area (men 0.5%, women -0.2%). Muscle cross-sectional area in men and women decreased by 0.6% and 0.4%/year, respectively, because of a decrease in quadriceps cross-sectional area (men 65.6%, women 81.6%) and non-quadriceps cross-sectional area (men 34.4%, women 18.4%). Muscle quality in men and women decreased by 0.4% and 0.3%/year, respectively. Thigh cross-sectional area decreased with age mainly because of a decrease in muscle cross-sectional area in men and fat cross-sectional area in women. The rate of decrease in muscle cross-sectional area was 1.5-fold higher in men than in women. Muscle cross-sectional area decreased with age mainly because of a decrease in quadriceps cross-sectional area, especially in women. Decrease in muscle quality with age was similar in both sexes. © 2014 Japan Geriatrics Society.

Job Strain and Tobacco Smoking: An Individual-Participant Data Meta-Analysis of 166 130 Adults in 15 European Studies

PubMed Central

Heikkilä, Katriina; Nyberg, Solja T.; Fransson, Eleonor I.; Alfredsson, Lars; De Bacquer, Dirk; Bjorner, Jakob B.; Bonenfant, Sébastien; Borritz, Marianne; Burr, Hermann; Clays, Els; Casini, Annalisa; Dragano, Nico; Erbel, Raimund; Geuskens, Goedele A.; Goldberg, Marcel; Hooftman, Wendela E.; Houtman, Irene L.; Joensuu, Matti; Jöckel, Karl-Heinz; Kittel, France; Knutsson, Anders; Koskenvuo, Markku; Koskinen, Aki; Kouvonen, Anne; Leineweber, Constanze; Lunau, Thorsten; Madsen, Ida E. H.; Hanson, Linda L. Magnusson; Marmot, Michael G.; Nielsen, Martin L.; Nordin, Maria; Pentti, Jaana; Salo, Paula; Rugulies, Reiner; Steptoe, Andrew; Siegrist, Johannes; Suominen, Sakari; Vahtera, Jussi; Virtanen, Marianna; Väänänen, Ari; Westerholm, Peter; Westerlund, Hugo; Zins, Marie; Theorell, Töres; Hamer, Mark; Ferrie, Jane E.; Singh-Manoux, Archana; Batty, G. David; Kivimäki, Mika

2012-01-01

Background Tobacco smoking is a major contributor to the public health burden and healthcare costs worldwide, but the determinants of smoking behaviours are poorly understood. We conducted a large individual-participant meta-analysis to examine the extent to which work-related stress, operationalised as job strain, is associated with tobacco smoking in working adults. Methodology and Principal Findings We analysed cross-sectional data from 15 European studies comprising 166 130 participants. Longitudinal data from six studies were used. Job strain and smoking were self-reported. Smoking was harmonised into three categories never, ex- and current. We modelled the cross-sectional associations using logistic regression and the results pooled in random effects meta-analyses. Mixed effects logistic regression was used to examine longitudinal associations. Of the 166 130 participants, 17% reported job strain, 42% were never smokers, 33% ex-smokers and 25% current smokers. In the analyses of the cross-sectional data, current smokers had higher odds of job strain than never-smokers (age, sex and socioeconomic position-adjusted odds ratio: 1.11, 95% confidence interval: 1.03, 1.18). Current smokers with job strain smoked, on average, three cigarettes per week more than current smokers without job strain. In the analyses of longitudinal data (1 to 9 years of follow-up), there was no clear evidence for longitudinal associations between job strain and taking up or quitting smoking. Conclusions Our findings show that smokers are slightly more likely than non-smokers to report work-related stress. In addition, smokers who reported work stress smoked, on average, slightly more cigarettes than stress-free smokers. PMID:22792154

MEASUREMENT AND BASIC PHYSICS COMMITTEE OF THE U.S. CROSS-SECTION EVALUATION WORKING GROUP, ANNUAL REPORT 1997

DOE Office of Scientific and Technical Information (OSTI.GOV)

SMITH,D.L.; MCLANE,V.

1998-10-20

The Cross-Section Evaluation Working Group (CSEWG) is a long-standing committee charged with responsibility for organizing and overseeing the US cross-section evaluation effort. Its main product is the official US evaluated nuclear data file, ENDF. The current version of this file is Version VI. All evaluations included in ENDF, as well as periodic modifications and updates to the file, are reviewed and approved by CSEWG and issued by the US Nuclear Data Center, Brookhaven National Laboratory. CSEWG is comprised of volunteers from the US nuclear data community who possess expertise in evaluation methodologies and who collectively have been responsible for producingmore » most of the evaluations included in ENDF. In 1992 CSEWG added the Measurements Committee to its list of standing committees and subcommittees. This action was based on a recognition of the importance of experimental data in the evaluation process as well as the realization that measurement activities in the US were declining at an alarming rate and needed considerable encouragement to avoid the loss of this resource. The mission of the Committee is to maintain contact with experimentalists in the US and to encourage them to contribute to the national nuclear data effort. Improved communication and the facilitation of collaborative activities are among the tools employed in achieving this objective. In 1994 the Committee was given an additional mission, namely, to serve as an interface between the applied interests represented in CSEWG and the basic nuclear science community. Accordingly, its name was changed to the Measurement and Basic Physics Committee. The present annual report is the third such document issued by the Committee. It contains voluntary contributions from several laboratories in the US. Their contributions were submitted to the Chairman for compilation and editing.« less

Potential sources of bias in the use of Escherichia coli to measure waterborne diarrhoea risk in low-income settings.

PubMed

Ercumen, Ayse; Arnold, Benjamin F; Naser, Abu Mohd; Unicomb, Leanne; Colford, John M; Luby, Stephen P

2017-01-01

Escherichia coli is the standard water quality indicator for diarrhoea risk. Yet, the association between E. coli and diarrhoea is inconsistent across studies without a systematic assessment of methodological differences behind this variation. Most studies measure water quality cross-sectionally with diarrhoea, risking exposure misclassification and reverse causation. Studies use different recall windows for self-reported diarrhoea; longer periods increase potential outcome misclassification through misrecall. Control of confounding is inconsistent across studies. Additionally, diarrhoea measured in unblinded intervention trials can present courtesy bias. We utilised measurements from a randomised trial of water interventions in Bangladesh to assess how these factors affect the E. coli-diarrhoea association. We compared cross-sectional versus prospective measurements of water quality and diarrhoea, 2-versus 7-day symptom recall periods, estimates with and without controlling for confounding and using measurements from control versus intervention arms of the trial. In the control arm, 2-day diarrhoea prevalence, measured prospectively 1 month after water quality, significantly increased with log 10 E. coli (PR = 1.50, 1.02-2.20). This association weakened when we used 7-day recall (PR = 1.18, 0.88-1.57), cross-sectional measurements of E. coli and diarrhoea (PR = 1.11, 0.79-1.56) or did not control for confounding (PR = 1.20, 0.88-1.62). Including data from intervention arms led to less interpretable associations, potentially due to courtesy bias, effect modification and/or reverse causation. By systematically addressing potential sources of bias, our analysis demonstrates a clear relationship between E. coli in drinking water and diarrhoea, suggesting that the continued use of E. coli as an indicator of waterborne diarrhoea risk is justified. © 2016 John Wiley & Sons Ltd.

Automated assessment of bone changes in cross-sectional micro-CT studies of murine experimental osteoarthritis.

PubMed

Das Neves Borges, Patricia; Vincent, Tonia L; Marenzana, Massimo

2017-01-01

The degradation of articular cartilage, which characterises osteoarthritis (OA), is usually paired with excessive bone remodelling, including subchondral bone sclerosis, cysts, and osteophyte formation. Experimental models of OA are widely used to investigate pathogenesis, yet few validated methodologies for assessing periarticular bone morphology exist and quantitative measurements are limited by manual segmentation of micro-CT scans. The aim of this work was to chart the temporal changes in periarticular bone in murine OA by novel, automated micro-CT methods. OA was induced by destabilisation of the medial meniscus (DMM) in 10-week old male mice and disease assessed cross-sectionally from 1- to 20-weeks post-surgery. A novel approach was developed to automatically segment subchondral bone compartments into plate and trabecular bone in micro-CT scans of tibial epiphyses. Osteophyte volume, as assessed by shape differences using 3D image registration, and by measuring total epiphyseal volume was performed. Significant linear and volumetric structural modifications in subchondral bone compartments and osteophytes were measured from 4-weeks post-surgery and showed progressive changes at all time points; by 20 weeks, medial subchondral bone plate thickness increased by 160±19.5 μm and the medial osteophyte grew by 0.124±0.028 μm3. Excellent agreement was found when automated measurements were compared with manual assessments. Our automated methods for assessing bone changes in murine periarticular bone are rapid, quantitative, and highly accurate, and promise to be a useful tool in future preclinical studies of OA progression and treatment. The current approaches were developed specifically for cross-sectional micro-CT studies but could be applied to longitudinal studies.

Automated assessment of bone changes in cross-sectional micro-CT studies of murine experimental osteoarthritis

PubMed Central

Vincent, Tonia L.; Marenzana, Massimo

2017-01-01

Objective The degradation of articular cartilage, which characterises osteoarthritis (OA), is usually paired with excessive bone remodelling, including subchondral bone sclerosis, cysts, and osteophyte formation. Experimental models of OA are widely used to investigate pathogenesis, yet few validated methodologies for assessing periarticular bone morphology exist and quantitative measurements are limited by manual segmentation of micro-CT scans. The aim of this work was to chart the temporal changes in periarticular bone in murine OA by novel, automated micro-CT methods. Methods OA was induced by destabilisation of the medial meniscus (DMM) in 10-week old male mice and disease assessed cross-sectionally from 1- to 20-weeks post-surgery. A novel approach was developed to automatically segment subchondral bone compartments into plate and trabecular bone in micro-CT scans of tibial epiphyses. Osteophyte volume, as assessed by shape differences using 3D image registration, and by measuring total epiphyseal volume was performed. Results Significant linear and volumetric structural modifications in subchondral bone compartments and osteophytes were measured from 4-weeks post-surgery and showed progressive changes at all time points; by 20 weeks, medial subchondral bone plate thickness increased by 160±19.5 μm and the medial osteophyte grew by 0.124±0.028 μm3. Excellent agreement was found when automated measurements were compared with manual assessments. Conclusion Our automated methods for assessing bone changes in murine periarticular bone are rapid, quantitative, and highly accurate, and promise to be a useful tool in future preclinical studies of OA progression and treatment. The current approaches were developed specifically for cross-sectional micro-CT studies but could be applied to longitudinal studies. PMID:28334010

Three-dimensional simulation of human teeth and its application in dental education and research.

PubMed

Koopaie, Maryam; Kolahdouz, Sajad

2016-01-01

Background: A comprehensive database, comprising geometry and properties of human teeth, is needed for dentistry education and dental research. The aim of this study was to create a three-dimensional model of human teeth to improve the dental E-learning and dental research. Methods: In this study, a cross-section picture of the three-dimensional model of the teeth was used. CT-Scan images were used in the first method. The space between the cross- sectional images was about 200 to 500 micrometers. Hard tissue margin was detected in each image by Matlab (R2009b), as image processing software. The images were transferred to Solidworks 2015 software. Tooth border curve was fitted on B-spline curves, using the least square-curve fitting algorithm. After transferring all curves for each tooth to Solidworks, the surface was created based on the surface fitting technique. This surface was meshed in Meshlab-v132 software, and the optimization of the surface was done based on the remeshing technique. The mechanical properties of the teeth were applied to the dental model. Results: This study presented a methodology for communication between CT-Scan images and the finite element and training software through which modeling and simulation of the teeth were performed. In this study, cross-sectional images were used for modeling. According to the findings, the cost and time were reduced compared to other studies. Conclusion: The three-dimensional model method presented in this study facilitated the learning of the dental students and dentists. Based on the three-dimensional model proposed in this study, designing and manufacturing the implants and dental prosthesis are possible.

Three-dimensional simulation of human teeth and its application in dental education and research

PubMed Central

Koopaie, Maryam; Kolahdouz, Sajad

2016-01-01

Background: A comprehensive database, comprising geometry and properties of human teeth, is needed for dentistry education and dental research. The aim of this study was to create a three-dimensional model of human teeth to improve the dental E-learning and dental research. Methods: In this study, a cross-section picture of the three-dimensional model of the teeth was used. CT-Scan images were used in the first method. The space between the cross- sectional images was about 200 to 500 micrometers. Hard tissue margin was detected in each image by Matlab (R2009b), as image processing software. The images were transferred to Solidworks 2015 software. Tooth border curve was fitted on B-spline curves, using the least square-curve fitting algorithm. After transferring all curves for each tooth to Solidworks, the surface was created based on the surface fitting technique. This surface was meshed in Meshlab-v132 software, and the optimization of the surface was done based on the remeshing technique. The mechanical properties of the teeth were applied to the dental model. Results: This study presented a methodology for communication between CT-Scan images and the finite element and training software through which modeling and simulation of the teeth were performed. In this study, cross-sectional images were used for modeling. According to the findings, the cost and time were reduced compared to other studies. Conclusion: The three-dimensional model method presented in this study facilitated the learning of the dental students and dentists. Based on the three-dimensional model proposed in this study, designing and manufacturing the implants and dental prosthesis are possible. PMID:28491836

Total cross sections for positrons scattered elastically from helium based on new measurements of total ionization cross sections

NASA Technical Reports Server (NTRS)

Diana, L. M.; Chaplin, R. L.; Brooks, D. L.; Adams, J. T.; Reyna, L. K.

1990-01-01

An improved technique is presented for employing the 2.3m spectrometer to measure total ionization cross sections, Q sub ion, for positrons incident on He. The new ionization cross section agree with the values reported earlier. Estimates are also presented of total elastic scattering cross section, Q sub el, obtained by subtracting from total scattering cross sections, Q sub tot, reported in the literature, the Q sub ion and Q sub Ps (total positronium formation cross sections) and total excitation cross sections, Q sub ex, published by another researcher. The Q sub ion and Q sub el measured with the 3m high resolution time-of-flight spectrometer for 54.9eV positrons are in accord with the results from the 2.3m spectrometer. The ionization cross sections are in fair agreement with theory tending for the most part to be higher, especially at 76.3 and 88.5eV. The elastic cross section agree quite well with theory to the vicinity of 50eV, but at 60eV and above the experimental elastic cross sections climb to and remain at about 0.30 pi a sub o sq while the theoretical values steadily decrease.

Nano-fabricated plasmonic optical transformer

DOEpatents

Choo, Hyuck; Cabrini, Stefano; Schuck, P. James; Liang, Xiaogan; Yablonovitch, Eli

2015-06-09

The present invention provides a plasmonic optical transformer to produce a highly focuses optical beam spot, where the transformer includes a first metal layer, a dielectric layer formed on the first metal layer, and a second metal layer formed on the dielectric layer, where the first metal layer, the dielectric layer, and the second layer are patterned to a shape including a first section having a first cross section, a second section following the first section having a cross-section tapering from the first section to a smaller cross-section, and a third section following the second section having a cross-section matching the tapered smaller cross-section of the second section.

Invited commentary: on population subgroups, mathematics, and interventions.

PubMed

Jacobs, David R; Meyer, Katie A

2011-02-15

New sex-specific equations, each with race/ethnic-specific intercept, for predicted lung function illustrate a methodological point, that complex differences between groups may not imply interactions with other predictors, such as age and height. The new equations find that race/ethnic identity does not interact with either age or height in the prediction equations, although there are race/ethnic-specific offsets. Further study is warranted of the effect of possible small race/ethnic interactions on disease classification. Additional study of repeated measures of lung function is warranted, given that the new equations were developed in cross-sectional designs. Predicting lung function is more than a methodological exercise. Predicted values are important in disease diagnosis and monitoring. It is suggested that measurement and tracking of lung function throughout young adulthood could be used to provide an early warning of potential long-term lung function losses to encourage improvement of risky behaviors including smoking and failure to maintain normal body weight in the general population.

Geologic cross section C-C' through the Appalachian basin from Erie County, north-central Ohio, to the Valley and Ridge province, Bedford County, south-central Pennsylvania

USGS Publications Warehouse

Ryder, Robert T.; Trippi, Michael H.; Swezey, Christopher S.; Crangle, Robert D.; Hope, Rebecca S.; Rowan, Elisabeth L.; Lentz, Erika E.

2012-01-01

Geologic cross section C-C' is the third in a series of cross sections constructed by the U.S. Geological Survey (USGS) to document and improve understanding of the geologic framework and petroleum systems of the Appalachian basin. Cross section C-C' provides a regional view of the structural and stratigraphic framework of the Appalachian basin from north-central Ohio to the Valley and Ridge province in south-central Pennsylvania, a distance of approximately 260 miles (mi). This cross section is a companion to cross sections E-E' and D-D' that are located about 50 to 125 mi and 25 to 50 mi, respectively, to the southwest. Cross section C-C' contains much information that is useful for evaluating energy resources in the Appalachian basin. Although specific petroleum systems are not identified on the cross section, many of their key elements (such as source rocks, reservoir rocks, seals, and traps) can be inferred from lithologic units, unconformities, and geologic structures shown on the cross section. Other aspects of petroleum systems (such as the timing of petroleum generation and preferred migration pathways) may be evaluated by burial history, thermal history, and fluid flow models based on what is shown on the cross section. Cross section C-C' also provides a general framework (stratigraphic units and general rock types) for the coal-bearing section, although the cross section lacks the detail to illustrate key elements of coal systems (such as paleoclimate, coal quality, and coal rank). In addition, cross section C-C' may be used as a reconnaissance tool to identify plausible geologic structures and strata for the subsurface storage of liquid waste or for the sequestration of carbon dioxide.

Cross-Cultural Psychology.

ERIC Educational Resources Information Center

Triandis, Harry C.; Brislin, Richard W.

1984-01-01

Provides references to the work of cross-cultural psychologists that can be integrated into regular undergraduate psychology courses. Discusses methodological problems, benefits, and difficulties of cross-cultural research. Reviews contributions of this field to the study of perception, cognition, motivation, interpersonal interaction, and group…

Multistrand superconductor cable

DOEpatents

Borden, Albert R.

1985-01-01

Improved multistrand Rutherford-type superconductor cable is produced by using strands which are preformed, prior to being wound into the cable, so that each strand has a variable cross section, with successive portions having a substantially round cross section, a transitional oval cross section, a rectangular cross section, a transitional oval cross section, a round cross section and so forth, in repetitive cycles along the length of the strand. The cable is wound and flattened so that the portions of rectangular cross section extend across the two flat sides of the cable at the strand angle. The portions of round cross section are bent at the edges of the flattened cable, so as to extend between the two flat sides. The rectangular portions of the strands slide easily over one another, so as to facilitate flexing and bending of the cable, while also minimizing the possibility of causing damage to the strands by such flexing or bending. Moreover, the improved cable substantially maintains its compactness and cross-sectional shape when the cable is flexed or bent.

Computer image analysis traits of cross-sectioned dry-cured hams: a genetic analysis.

PubMed

Bonfatti, V; Cecchinato, A; Sturaro, E; Gallo, L; Carnier, P

2011-08-01

The aims of this study were to estimate genetic parameters of image analysis traits of cross-sectioned dry-cured hams and carcass weight (CW) and to investigate effects of some nongenetic sources of variation on these traits. Computer image analysis (CIA) had been carried out for digital images of the cross-section of 1,319 San Daniele dry-cured hams. The cross-sectional area (SA, cm(2)); the average thickness of subcutaneous fat (FT, cm); and the proportions of lean (LA, %), fat-eye (FEA, %), and subcutaneous fat area (SCF, %) to SA, and of biceps femoris (BFA, %) and semitendinosus muscle area (STA, %) to LA were recorded. Bivariate analyses were carried out for pairs of traits for estimation of genetic parameters using Bayesian methodology and linear models. Linear models included the nongenetic effects of slaughter groups and sex and the additive genetic effects of pigs and their ancestors (1,888 animals). Variation of FEA was nearly 4-fold that of SA and LA. Variation of CIA traits due to sex effect was not large, whereas slaughter group effects were relevant sources of variation for all traits. For all traits, with the exception of FEA, the posterior probability for the true heritability being greater than 0.1, was greater than 0.95. Point estimates of heritabilities for FT and SCF were 0.42 and 0.51, respectively. Heritability estimates for FEA, LA, BFA, and STA were 0.13, 0.44, 0.44, and 0.36, respectively. The genetic correlations between CW and CIA traits were positive and large for SA (0.86), positive and moderate for FT, FEA, and STA (0.47, 0.40, and 0.45, respectively) and negative with LA (-0.28). Although FEA, FT, and SCF were all measures of the extent of fat deposition in the ham, the genetic correlations between FT or SCF and FEA were very low. A very large estimate (0.74) was obtained for the genetic relationship between SA and FEA, suggesting that reduction of ham roundness through selective breeding would be beneficial for decreasing FEA. On the basis of the estimated parameters, genetic selection is expected to be effective in changing size of fatty and lean areas of the cross-section of dry-cured hams. Causes related to the abnormal development of the fat-eye depot remain unknown, but this study provided evidence that influences of polygenic effects on phenotypic variation of FEA are limited. © 2011 American Society of Animal Science. All rights reserved.

The Theoretical and Methodological Crisis of the Afrocentric Conception.

ERIC Educational Resources Information Center

Banks, W. Curtis

1992-01-01

Defines the theory of the Afrocentric conception, and comments on Afrocentric research methodology. The Afrocentric conception is likely to succeed if it constructs a particularist theory in contrast to cross-cultural relativism and because it relies on the methodology of the absolute rather than the comparative. (SLD)

Timing of translation in cross-language qualitative research.

PubMed

Santos, Hudson P O; Black, Amanda M; Sandelowski, Margarete

2015-01-01

Although there is increased understanding of language barriers in cross-language studies, the point at which language transformation processes are applied in research is inconsistently reported, or treated as a minor issue. Differences in translation timeframes raise methodological issues related to the material to be translated, as well as for the process of data analysis and interpretation. In this article we address methodological issues related to the timing of translation from Portuguese to English in two international cross-language collaborative research studies involving researchers from Brazil, Canada, and the United States. One study entailed late-phase translation of a research report, whereas the other study involved early phase translation of interview data. The timing of translation in interaction with the object of translation should be considered, in addition to the language, cultural, subject matter, and methodological competencies of research team members. © The Author(s) 2014.

[Review of the gender research in cross-cultural psychology since 1990: conceptual definitions and methodology].

PubMed

Suzuki, Atsuko

2004-06-01

A review of the cross-cultural research on gender in psychology since 1990 reveals (1) conceptual confusion of the definitions of sex, gender, man, and woman; (2) diversification, refinement, reification, and a problem-solving orientation in the research topics; and (3) the possibility of the elucidation of the psychological sex-difference mechanism in relation to the biological sex differences. A comparison of 1990 and 2000 cross-cultural psychological articles published in "Sex Roles" found that overall, the research is Western-centered and some methodological problems remain to be solved concerning the measures and the sampling. These findings lead to the following suggestions for cross-cultural research on gender to resolve the problems and contribute to the development of psychology in general: (1) use of an operational definition for conceptual equivalence; (2) conducting more etic-approach research; (3) avoiding ethnocentric or androcentric research attitudes; (4) use of a theoretical framework; (5) strict examination of methodologies; and (6) examination of the specific context of participants in terms of cultural diversity, dynamics of husband-wife relationships, and relationships with husbands and fathers.

AMPX: a modular code system for generating coupled multigroup neutron-gamma libraries from ENDF/B

DOE Office of Scientific and Technical Information (OSTI.GOV)

Greene, N.M.; Lucius, J.L.; Petrie, L.M.

1976-03-01

AMPX is a modular system for producing coupled multigroup neutron-gamma cross section sets. Basic neutron and gamma cross-section data for AMPX are obtained from ENDF/B libraries. Most commonly used operations required to generate and collapse multigroup cross-section sets are provided in the system. AMPX is flexibly dimensioned; neutron group structures, and gamma group structures, and expansion orders to represent anisotropic processes are all arbitrary and limited only by available computer core and budget. The basic processes provided will (1) generate multigroup neutron cross sections; (2) generate multigroup gamma cross sections; (3) generate gamma yields for gamma-producing neutron interactions; (4) combinemore » neutron cross sections, gamma cross sections, and gamma yields into final ''coupled sets''; (5) perform one-dimensional discrete ordinates transport or diffusion theory calculations for neutrons and gammas and, on option, collapse the cross sections to a broad-group structure, using the one-dimensional results as weighting functions; (6) plot cross sections, on option, to facilitate the ''evaluation'' of a particular multigroup set of data; (7) update and maintain multigroup cross section libraries in such a manner as to make it not only easy to combine new data with previously processed data but also to do it in a single pass on the computer; and (8) output multigroup cross sections in convenient formats for other codes. (auth)« less

Trunk Muscle Size and Composition Assessment in Older Adults with Chronic Low Back Pain: An Intra-Examiner and Inter-Examiner Reliability Study.

PubMed

Sions, Jaclyn Megan; Smith, Andrew Craig; Hicks, Gregory Evan; Elliott, James Matthew

2016-08-01

To evaluate intra- and inter-examiner reliability for the assessment of relative cross-sectional area, muscle-to-fat infiltration indices, and relative muscle cross-sectional area, i.e., total cross-sectional area minus intramuscular fat, from T1-weighted magnetic resonance images obtained in older adults with chronic low back pain. Reliability study. n = 13 (69.3 ± 8.2 years old) After lumbar magnetic resonance imaging, two examiners produced relative cross-sectional area measurements of multifidi, erector spinae, psoas, and quadratus lumborum by tracing regions of interest just inside fascial borders. Pixel-intensity summaries were used to determine muscle-to-fat infiltration indices; relative muscle cross-sectional area was calculated. Intraclass correlation coefficients were used to estimate intra- and inter-examiner reliability; standard error of measurement was calculated. Intra-examiner intraclass correlation coefficient point estimates for relative cross-sectional area, muscle-to-fat infiltration indices, and relative muscle cross-sectional area were excellent for multifidi and erector spinae across levels L2-L5 (ICC = 0.77-0.99). At L3, intra-examiner reliability was excellent for relative cross-sectional area, muscle-to-fat infiltration indices, and relative muscle cross-sectional area for both psoas and quadratus lumborum (ICC = 0.81-0.99). Inter-examiner intraclass correlation coefficients ranged from poor to excellent for relative cross-sectional area, muscle-to-fat infiltration indices, and relative muscle cross-sectional area. Assessment of relative cross-sectional area, muscle-to-fat infiltration indices, and relative muscle cross-sectional area in older adults with chronic low back pain can be reliably determined by one examiner from T1-weighted images. Such assessments provide valuable information, as muscle-to-fat infiltration indices and relative muscle cross-sectional area indicate that a substantial amount of relative cross-sectional area may be magnetic resonance-visible intramuscular fat in older adults with chronic low back pain. © 2015 American Academy of Pain Medicine. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Calculation of total and ionization cross sections for electron scattering by primary benzene compounds

NASA Astrophysics Data System (ADS)

Singh, Suvam; Naghma, Rahla; Kaur, Jaspreet; Antony, Bobby

2016-07-01

The total and ionization cross sections for electron scattering by benzene, halobenzenes, toluene, aniline, and phenol are reported over a wide energy domain. The multi-scattering centre spherical complex optical potential method has been employed to find the total elastic and inelastic cross sections. The total ionization cross section is estimated from total inelastic cross section using the complex scattering potential-ionization contribution method. In the present article, the first theoretical calculations for electron impact total and ionization cross section have been performed for most of the targets having numerous practical applications. A reasonable agreement is obtained compared to existing experimental observations for all the targets reported here, especially for the total cross section.

Parameterized Cross Sections for Pion Production in Proton-Proton Collisions

NASA Technical Reports Server (NTRS)

Blattnig, Steve R.; Swaminathan, Sudha R.; Kruger, Adam T.; Ngom, Moussa; Norbury, John W.; Tripathi, R. K.

2000-01-01

An accurate knowledge of cross sections for pion production in proton-proton collisions finds wide application in particle physics, astrophysics, cosmic ray physics, and space radiation problems, especially in situations where an incident proton is transported through some medium and knowledge of the output particle spectrum is required when given the input spectrum. In these cases, accurate parameterizations of the cross sections are desired. In this paper much of the experimental data are reviewed and compared with a wide variety of different cross section parameterizations. Therefore, parameterizations of neutral and charged pion cross sections are provided that give a very accurate description of the experimental data. Lorentz invariant differential cross sections, spectral distributions, and total cross section parameterizations are presented.

Individual Spatial Responses towards Roads: Implications for Mortality Risk

PubMed Central

Grilo, Clara; Sousa, Joana; Ascensão, Fernando; Matos, Hugo; Leitão, Inês; Pinheiro, Paula; Costa, Monica; Bernardo, João; Reto, Dyana; Lourenço, Rui; Santos-Reis, Margarida; Revilla, Eloy

2012-01-01

Background Understanding the ecological consequences of roads and developing ways to mitigate their negative effects has become an important goal for many conservation biologists. Most mitigation measures are based on road mortality and barrier effects data. However, studying fine-scale individual spatial responses in roaded landscapes may help develop more cohesive road planning strategies for wildlife conservation. Methodology/Principal Findings We investigated how individuals respond in their spatial behavior toward a highway and its traffic intensity by radio-tracking two common species particularly vulnerable to road mortality (barn owl Tyto alba and stone marten Martes foina). We addressed the following questions: 1) how highways affected home-range location and size in the immediate vicinity of these structures, 2) which road-related features influenced habitat selection, 3) what was the role of different road-related features on movement properties, and 4) which characteristics were associated with crossing events and road-kills. The main findings were: 1) if there was available habitat, barn owls and stone martens may not avoid highways and may even include highways within their home-ranges; 2) both species avoided using areas near the highway when traffic was high, but tended to move toward the highway when streams were in close proximity and where verges offered suitable habitat; and 3) barn owls tended to cross above-grade highway sections while stone martens tended to avoid crossing at leveled highway sections. Conclusions Mortality may be the main road-mediated mechanism that affects barn owl and stone marten populations. Fine-scale movements strongly indicated that a decrease in road mortality risk can be realized by reducing sources of attraction, and by increasing road permeability through measures that promote safe crossings. PMID:22970143

Dialogue, Eurocentrism, and Comparative Political Theory: A View from Cross-Cultural Intellectual History.

PubMed

Shogimen, Takashi

2016-01-01

Comparative political theory is an emerging sub-field of political theory; it is a response to the dissatisfaction with the prevalent Eurocentric mode of political theorizing in the age of globalization. A methodological characteristic of comparative political theory is cross-cultural engagement through dialogue with foreign political ideas. The present paper argues that the dialogical mode of cross-cultural engagement is distinctively European. While the dialogical engagement with foreign worldviews constitutes a mainstream of the European literary tradition, it is largely absent, for example, from the Japanese counterpart. Despite its anti-Eurocentric motivations, comparative political theory is methodologically rooted in the European tradition.

Bringing translation out of the shadows: translation as an issue of methodological significance in cross-cultural qualitative research.

PubMed

Wong, Josephine Pui-Hing; Poon, Maurice Kwong-Lai

2010-04-01

Translation is an integral component of cross-cultural research that has remained invisible. It is commonly assumed that translation is an objective and neutral process, in which the translators are "technicians" in producing texts in different languages. Drawing from the field of translation studies and the findings of a translation exercise conducted with three bilingual Cantonese-English translators, the authors highlight some of the methodological issues about translation in cross-cultural qualitative research. They argue that only by making translation visible and through open dialogue can researchers uncover the richness embedded in the research data and facilitate multiple ways of knowing.

An investigation of MCNP6.1 beryllium oxide S(α, β) cross sections

DOE PAGES

Sartor, Raymond F.; Glazener, Natasha N.

2016-03-08

In MCNP6.1, materials are constructed by identifying the constituent isotopes (or elements in a few cases) individually. This list selects the corresponding microscopic cross sections calculated from the free-gas model to create the material macroscopic cross sections. Furthermore, the free-gas model and the corresponding material macroscopic cross sections assume that the interactions of atoms do not affect the nuclear cross sections.

HIV, HCV, HBV, and syphilis among transgender women from Brazil

PubMed Central

Bastos, Francisco I.; Bastos, Leonardo Soares; Coutinho, Carolina; Toledo, Lidiane; Mota, Jurema Corrêa; Velasco-de-Castro, Carlos Augusto; Sperandei, Sandro; Brignol, Sandra; Travassos, Tamiris Severino; dos Santos, Camila Mattos; Malta, Monica Siqueira

2018-01-01

Abstract Different sampling strategies, analytic alternatives, and estimators have been proposed to better assess the characteristics of different hard-to-reach populations and their respective infection rates (as well as their sociodemographic characteristics, associated harms, and needs) in the context of studies based on respondent-driven sampling (RDS). Despite several methodological advances and hundreds of empirical studies implemented worldwide, some inchoate findings and methodological challenges remain. The in-depth assessment of the local structure of networks and the performance of the available estimators are particularly relevant when the target populations are sparse and highly stigmatized. In such populations, bottlenecks as well as other sources of biases (for instance, due to homophily and/or too sparse or fragmented groups of individuals) may be frequent, affecting the estimates. In the present study, data were derived from a cross-sectional, multicity RDS study, carried out in 12 Brazilian cities with transgender women (TGW). Overall, infection rates for HIV and syphilis were very high, with some variation between different cities. Notwithstanding, findings are of great concern, considering the fact that female TGW are not only very hard-to-reach but also face deeply-entrenched prejudice and have been out of the reach of most therapeutic and preventive programs and projects. We cross-compared findings adjusted using 2 estimators (the classic estimator usually known as estimator II, originally proposed by Volz and Heckathorn) and a brand new strategy to adjust data generated by RDS, partially based on Bayesian statistics, called for the sake of this paper, the RDS-B estimator. Adjusted prevalence was cross-compared with estimates generated by non-weighted analyses, using what has been called by us a naïve estimator or rough estimates. PMID:29794601

HIV, HCV, HBV, and syphilis among transgender women from Brazil: Assessing different methods to adjust infection rates of a hard-to-reach, sparse population.

PubMed

Bastos, Francisco I; Bastos, Leonardo Soares; Coutinho, Carolina; Toledo, Lidiane; Mota, Jurema Corrêa; Velasco-de-Castro, Carlos Augusto; Sperandei, Sandro; Brignol, Sandra; Travassos, Tamiris Severino; Dos Santos, Camila Mattos; Malta, Monica Siqueira

2018-05-01

Different sampling strategies, analytic alternatives, and estimators have been proposed to better assess the characteristics of different hard-to-reach populations and their respective infection rates (as well as their sociodemographic characteristics, associated harms, and needs) in the context of studies based on respondent-driven sampling (RDS). Despite several methodological advances and hundreds of empirical studies implemented worldwide, some inchoate findings and methodological challenges remain. The in-depth assessment of the local structure of networks and the performance of the available estimators are particularly relevant when the target populations are sparse and highly stigmatized. In such populations, bottlenecks as well as other sources of biases (for instance, due to homophily and/or too sparse or fragmented groups of individuals) may be frequent, affecting the estimates.In the present study, data were derived from a cross-sectional, multicity RDS study, carried out in 12 Brazilian cities with transgender women (TGW). Overall, infection rates for HIV and syphilis were very high, with some variation between different cities. Notwithstanding, findings are of great concern, considering the fact that female TGW are not only very hard-to-reach but also face deeply-entrenched prejudice and have been out of the reach of most therapeutic and preventive programs and projects.We cross-compared findings adjusted using 2 estimators (the classic estimator usually known as estimator II, originally proposed by Volz and Heckathorn) and a brand new strategy to adjust data generated by RDS, partially based on Bayesian statistics, called for the sake of this paper, the RDS-B estimator. Adjusted prevalence was cross-compared with estimates generated by non-weighted analyses, using what has been called by us a naïve estimator or rough estimates.

DBCC Software as Database for Collisional Cross-Sections

NASA Astrophysics Data System (ADS)

Moroz, Daniel; Moroz, Paul

2014-10-01

Interactions of species, such as atoms, radicals, molecules, electrons, and photons, in plasmas used for materials processing could be very complex, and many of them could be described in terms of collisional cross-sections. Researchers involved in plasma simulations must select reasonable cross-sections for collisional processes for implementing them into their simulation codes to be able to correctly simulate plasmas. However, collisional cross-section data are difficult to obtain, and, for some collisional processes, the cross-sections are still not known. Data on collisional cross-sections can be obtained from numerous sources including numerical calculations, experiments, journal articles, conference proceedings, scientific reports, various universities' websites, national labs and centers specifically devoted to collecting data on cross-sections. The cross-sections data received from different sources could be partial, corresponding to limited energy ranges, or could even not be in agreement. The DBCC software package was designed to help researchers in collecting, comparing, and selecting cross-sections, some of which could be constructed from others or chosen as defaults. This is important as different researchers may place trust in different cross-sections or in different sources. We will discuss the details of DBCC and demonstrate how it works and why it is beneficial to researchers working on plasma simulations.

The Migrant Border Crossing Study: A methodological overview of research along the Sonora-Arizona border.

PubMed

Martínez, Daniel E; Slack, Jeremy; Beyerlein, Kraig; Vandervoet, Prescott; Klingman, Kristin; Molina, Paola; Manning, Shiras; Burham, Melissa; Walzak, Kylie; Valencia, Kristen; Gamboa, Lorenzo

2017-07-01

Increased border enforcement efforts have redistributed unauthorized Mexican migration to the United States (US) away from traditional points of crossing, such as San Diego and El Paso, and into more remote areas along the US-Mexico border, including southern Arizona. Yet relatively little quantitative scholarly work exists examining Mexican migrants' crossing, apprehension, and repatriation experiences in southern Arizona. We contend that if scholars truly want to understand the experiences of unauthorized migrants in transit, such migrants should be interviewed either at the border after being removed from the US, or during their trajectories across the border, or both. This paper provides a methodological overview of the Migrant Border Crossing Study (MBCS), a unique data source on Mexican migrants who attempted an unauthorized crossing along the Sonora-Arizona border, were apprehended, and repatriated to Nogales, Sonora in 2007-09. We also discuss substantive and theoretical contributions of the MBCS.

Geologic Cross Section E-E' through the Appalachian Basin from the Findlay Arch, Wood County, Ohio, to the Valley and Ridge Province, Pendleton County, West Virginia

USGS Publications Warehouse

Ryder, Robert T.; Swezey, Christopher S.; Crangle, Robert D.; Trippi, Michael H.

2008-01-01

Geologic cross section E-E' is the first in a series of cross sections planned by the U.S. Geological Survey (USGS) to document and improve understanding of the geologic framework and petroleum systems of the Appalachian basin. Cross section E-E' provides a regional view of the structural and stratigraphic framework of the basin from the Findlay arch in northwestern Ohio to the Valley and Ridge province in eastern West Virginia, a distance of approximately 380 miles (mi) (fig. 1, on sheet 1). Cross section E-E' updates earlier geologic cross sections through the central Appalachian basin by Renfro and Feray (1970), Bennison (1978), and Bally and Snelson (1980) and a stratigraphic cross section by Colton (1970). Although other published cross sections through parts of the basin show more structural detail (for example, Shumaker, 1985; Kulander and Dean, 1986) and stratigraphic detail (for example, Ryder, 1992; de Witt and others, 1993; Hettinger, 2001), these other cross sections are of more limited extent geographically and stratigraphically. Although specific petroleum systems in the Appalachian basin are not identified on the cross section, many of their key elements (such as source rocks, reservoir rocks, seals, and traps) can be inferred from lithologic units, unconformities, and geologic structures shown on the cross section. Other aspects of petroleum systems (such as the timing of petroleum generation and preferred migration pathways) may be evaluated by burial history, thermal history, and fluid flow models based on information shown on the cross section. Cross section E-E' lacks the detail to illustrate key elements of coal systems (such as paleoclimate, coal quality, and coal rank), but it does provide a general framework (stratigraphic units and general rock types) for the coal-bearing section. Also, cross section E-E' may be used as a reconnaissance tool to identify plausible geologic structures and strata for the subsurface storage of liquid waste (for example, Colton, 1961; Lloyd and Reid, 1990) or for the sequestration of carbon dioxide (for example, Smith and others, 2002; Lucier and others, 2006).

A comparison of total reaction cross section models used in particle and heavy ion transport codes

NASA Astrophysics Data System (ADS)

Sihver, Lembit; Lantz, M.; Takechi, M.; Kohama, A.; Ferrari, A.; Cerutti, F.; Sato, T.

To be able to calculate the nucleon-nucleus and nucleus-nucleus total reaction cross sections with precision is very important for studies of basic nuclear properties, e.g. nuclear structure. This is also of importance for particle and heavy ion transport calculations because, in all particle and heavy ion transport codes, the probability function that a projectile particle will collide within a certain distance x in the matter depends on the total reaction cross sections. Furthermore, the total reaction cross sections will also scale the calculated partial fragmentation cross sections. It is therefore crucial that accurate total reaction cross section models are used in the transport calculations. In this paper, different models for calculating nucleon-nucleus and nucleus-nucleus total reaction cross sections are compared and discussed.

Vertically stabilized elongated cross-section tokamak

DOEpatents

Sheffield, George V.

1977-01-01

This invention provides a vertically stabilized, non-circular (minor) cross-section, toroidal plasma column characterized by an external separatrix. To this end, a specific poloidal coil means is added outside a toroidal plasma column containing an endless plasma current in a tokamak to produce a rectangular cross-section plasma column along the equilibrium axis of the plasma column. By elongating the spacing between the poloidal coil means the plasma cross-section is vertically elongated, while maintaining vertical stability, efficiently to increase the poloidal flux in linear proportion to the plasma cross-section height to achieve a much greater plasma volume than could be achieved with the heretofore known round cross-section plasma columns. Also, vertical stability is enhanced over an elliptical cross-section plasma column, and poloidal magnetic divertors are achieved.

BACKSCAT Lidar Simulation Version 3.0: Technical Documentation and Users Guide

DTIC Science & Technology

1992-12-03

Raman Cross Section of Some Simple Gases, J. Opt. Soc. Am., 63:73. 20 Penny, C.M., St. Peters, R.L., and Lapp, M., (1974) Absolute Rotational Raman...of the molecule, and the remaining columns list the relative normalized cross sections for the respective excitation wavelength. The absolute Raman...cross section is obtained by simply multiplying the relative normalized cross section for a molecular species of interest by the absolute cross section

Integrating cross-cultural psychology research methods into ethnic minority psychology.

PubMed

Leong, Frederick T L; Leung, Kwok; Cheung, Fanny M

2010-10-01

Multicultural psychology has 2 related but often disconnected streams, namely cross-cultural psychology and racial and ethnic minority psychology (Hall & Maramba, 2001). We propose that advances in both fields will be facilitated if there is greater cross-fertilization, especially in methodological approaches given that proponents in both fields are interested in studying and understanding the role and impact of culture on human behavior. To facilitate this cross-fertilization, we present 3 methodological approaches that would be of value in racial and ethnic minority psychology. First, we present an overview of the importance of and the approaches to evaluating and establishing measurement equivalence. Second, we discuss recent advances in the understanding of conceptual equivalence in light of indigenous approaches, cultural manipulation, and multilevel analysis. Third, we present a combined etic-emic approach to cross-cultural personality research as illustrated by the Cross-Cultural Personality Assessment Inventory developed by Fanny Cheung and her colleagues. PsycINFO Database Record (c) 2010 APA, all rights reserved.

Toward Theory-Based Research in Political Communication.

ERIC Educational Resources Information Center

Simon, Adam F.; Iyengar, Shanto

1996-01-01

Praises the theoretical and methodological potential of the field of political communication. Calls for greater interaction and cross fertilization among the fields of political science, sociology, economics, and psychology. Briefly discusses relevant research methodologies. (MJP)

Energy and Mass-Number Dependence of Hadron-Nucleus Total Reaction Cross Sections

NASA Astrophysics Data System (ADS)

Kohama, Akihisa; Iida, Kei; Oyamatsu, Kazuhiro

2016-09-01

We thoroughly investigate how proton-nucleus total reaction cross sections depend on the target mass number A and the proton incident energy. In doing so, we systematically analyze nuclear reaction data that are sensitive to nuclear size, namely, proton-nucleus total reaction cross sections and differential elastic cross sections, using a phenomenological black-sphere approximation of nuclei that we are developing. In this framework, the radius of the black sphere is found to be a useful length scale that simultaneously accounts for the observed proton-nucleus total reaction cross section and first diffraction peak in the proton elastic differential cross section. This framework, which is shown here to be applicable to antiprotons, is expected to be applicable to any kind of projectile that is strongly attenuated in the nucleus. On the basis of a cross-section formula constructed within this framework, we find that a less familiar A1/6 dependence plays a crucial role in describing the energy dependence of proton-nucleus total reaction cross sections.

Activation cross section and isomeric cross-section ratio for the 151Eu(n,2n)150m,gEu process

NASA Astrophysics Data System (ADS)

Luo, Junhua; Li, Suyuan; Jiang, Li

2018-07-01

The cross sections of 151Eu(n,2n)150m,gEu reactions and their isomeric cross section ratios σm/σt have been measured experimentally. Cross sections are measured, relative to a reference 93Nb(n,2n)92mNb reaction cross section, by means of the activation technique at three neutron energies 13.5, 14.1, and 14.8 MeV. Monoenergetic neutron beams were formed via the 3H(d,n)4He reaction and both Eu2O3 samples and Nb monitor foils were activated together to determine the reaction cross section and the incident neutron flux. The activities induced in the reaction products were measured using high-resolution gamma ray spectroscopy. Cross sections were also evaluated theoretically using the numerical nuclear model code, TALYS-1.8 with different level density options at neutron energies varying from the reaction threshold to 20 MeV. Results are discussed and compared with the corresponding literature.

Total reaction cross sections in CEM and MCNP6 at intermediate energies

DOE PAGES

Kerby, Leslie M.; Mashnik, Stepan G.

2015-05-14

Accurate total reaction cross section models are important to achieving reliable predictions from spallation and transport codes. The latest version of the Cascade Exciton Model (CEM) as incorporated in the code CEM03.03, and the Monte Carlo N-Particle transport code (MCNP6), both developed at Los Alamos National Laboratory (LANL), each use such cross sections. Having accurate total reaction cross section models in the intermediate energy region (50 MeV to 5 GeV) is very important for different applications, including analysis of space environments, use in medical physics, and accelerator design, to name just a few. The current inverse cross sections used inmore » the preequilibrium and evaporation stages of CEM are based on the Dostrovsky et al. model, published in 1959. Better cross section models are now available. Implementing better cross section models in CEM and MCNP6 should yield improved predictions for particle spectra and total production cross sections, among other results.« less

Total reaction cross sections in CEM and MCNP6 at intermediate energies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kerby, Leslie M.; Mashnik, Stepan G.

Accurate total reaction cross section models are important to achieving reliable predictions from spallation and transport codes. The latest version of the Cascade Exciton Model (CEM) as incorporated in the code CEM03.03, and the Monte Carlo N-Particle transport code (MCNP6), both developed at Los Alamos National Laboratory (LANL), each use such cross sections. Having accurate total reaction cross section models in the intermediate energy region (50 MeV to 5 GeV) is very important for different applications, including analysis of space environments, use in medical physics, and accelerator design, to name just a few. The current inverse cross sections used inmore » the preequilibrium and evaporation stages of CEM are based on the Dostrovsky et al. model, published in 1959. Better cross section models are now available. Implementing better cross section models in CEM and MCNP6 should yield improved predictions for particle spectra and total production cross sections, among other results.« less

Development of a method for fabricating metallic matrix composite shapes by a continuous mechanical process

NASA Technical Reports Server (NTRS)

Divecha, A. P.; Karmarkar, S. D.; Pawar, P. G.

1973-01-01

The continuing efforts in upscaling to produce larger diameter Al/B tubes are described. While the basic methodology remains unchanged, the larger volume of acrylic binder material and its removal by dissolution in toluene had to be performed by dynamic scrubbing. Similarly, the boron and MCF continuous length requirements increased when a 6 foot long by 7 inches wide mat was needed. These modifications and associated problems are described fully with schematics. Also included are seven experiments conducted to prepare larger tubes. The thermal profile, drawing speeds, and furnace positions in the draw bench bay are presented along with metallographic evidence of composite cross sections.

Strong Electron Correlation in Photoionization of Spin-Orbit Doublets

NASA Astrophysics Data System (ADS)

Amusia, M. Ya.; Chernsheva, L. V.; Mnason, S. T.; Msezane, A. Z.; Radojevic, V.

2002-05-01

A new and explicitly many-body aspect of the "leveraging" of the spin-orbit interaction is demonstrated, spin-orbit activated interchannel coupling, which can significantly alter the photoionization cross section of a spin-orbit doublet. As an example, using a modified version of the Spin-Polarized Random-Phase-Approximation with Exchange methodology, a recently observed structure in the photoionization of Xe 3d(A. Kivimaki et al, Phys. Rev. A 63), 012716 (2000) has been explained both qualitatively and quantitatively. The structure is entirely due to this new spin-orbit activated interchannel coupling effect, which should be a general feature of inner-shell photoionization. This work was supported by NSF, NASA, DOE and ISTC.

Let’s Talk about Sex, Maybe: Interviewers, Respondents, and Sexual Behavior Reporting in Rural South Africa

PubMed Central

Angotti, Nicole; Clark, Samuel J.; Williams, Jill; Gómez-Olivé, F. Xavier; Menken, Jane; Kabudula, Chodziwadziwa; Klipstein-Grobusch, Kerstin; Tollman, Stephen M.

2016-01-01

Researchers are often skeptical of sexual behavior surveys: respondents may lie or forget details of their intimate lives, and interviewers may exercise authority in how they capture responses. We use data from a 2010–2011 cross-sectional sexual behavior survey in rural South Africa to explore who says what to whom about their sexual lives. Results show an effect of fieldworker age across outcomes -- respondents report “safer”, more “responsible” sexual behavior to older fieldworkers; and an effect of fieldworker sex -- men report more sexual partners to female fieldworkers. Understanding fieldworker effects on the production of sexual behavior survey data serves methodological and analytical goals. PMID:28190977

Loads and performance data from a wind-tunnel test of model articulated helicopter rotors with 2 different blade torsional stiffnesses

NASA Technical Reports Server (NTRS)

Yeager, W. T., Jr.; Mantay, W. R.

1983-01-01

A passive means of tailoring helicopter rotor blades to improve performance and reduce loads was evaluated. The parameters investigated were blade torsional stiffness, blade section camber, and distance between blade structural elastic axis and blade tip aerodynamic center. This offset was accomplished by sweeping the tip. The investigation was conducted at advance ratios of 0.20, 0.30, and 0.40. Data are presented without analysis; however, cross referencing of performance data and harmonic loads data may be useful to the analyst for validating aeroelastic theories and design methodologies as well as for evaluating passive aeroelastic tailoring or rotor blade parameters.

[Methodologies of publications in the Revista de Investigación Clínica during the last 20 years].

PubMed

López-Jiménez, F; Borovoy, J

1997-01-01

To characterize the clinical research methods published in the Revista de Investigación Clínica for the past 20 years. Comparative study of methods used in the RIC articles published in 3-years periods representing three decades (1972-74, 1982-84, 1992-94). Out of 273 original papers, 218 (80%) were of clinical research. There was an increased percentage of longitudinal vs cross-sectional studies, with cohort and randomized clinical trials showing the largest increase. The total number of research manuscripts also increased. The clinical research methods of the papers in the RIC have shown an increased rate of designs with a higher scientific value.

A phenomenological study of photon production in low energy neutrino nucleon scattering

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jenkins, James P; Goldman, Terry J

2009-01-01

Low energy photon production is an important background to many current and future precision neutrino experiments. We present a phenomenological study of t-channel radiative corrections to neutral current neutrino nucleus scattering. After introducing the relevant processes and phenomenological coupling constants, we will explore the derived energy and angular distributions as well as total cross-section predictions along with their estimated uncertainties. This is supplemented throughout with comments on possible experimental signatures and implications. We conclude with a general discussion of the analysis in the context of complimentary methodologies. This is based on a talk presented at the DPF 2009 meeting inmore » Detroit MI.« less

The Profile of Saudi Nursing Workforce: A Cross-Sectional Study

PubMed Central

Magarey, Judy; Wiechula, Richard

2017-01-01

Introduction The Royal Monarchy in Saudi Arabia decreed that all sectors of the workforce would be subject to a policy of “Saudisation” to reduce the reliance on the expatriate workforce and to reduce the unemployment rate of Saudi nationals (Al-Mahmoud et al., 2012). Methodology A cross-sectional design was chosen to investigate the research questions. The population of this study comprised Saudi Registered Nurses working in MOH hospitals in Riyadh which is the main health care provider in Saudi Arabia (Aboul-Enein, 2002; MOH, 2009). Results and Findings A total number of 1,198 questionnaires were distributed and 61.2% (n = 741) were returned. The findings of the study showed that the questionnaires were collected from an equal portion of the study locale and that a sample of 741 is enough to create a strong conclusion and answer the problem set in this study and all the questions in the study have been provided with answers with enough data and literatures to supports its findings. Conclusion and Recommendations The results indicate that an increase in the recruitment of Saudi males may simply reflect cultural issues such as gender specific facilities and the Saudisation program's nondiscriminatory approach to employment of both genders into nursing. PMID:29214078

Differential dpa calculations with SPECTRA-PKA

NASA Astrophysics Data System (ADS)

Gilbert, M. R.; Sublet, J.-Ch.

2018-06-01

The processing code SPECTRA-PKA produces energy spectra of primary atomic recoil events (or primary knock-on atoms, PKAs) for any material composition exposed to an irradiation spectrum. Such evaluations are vital inputs for simulations aimed at understanding the evolution of damage in irradiated material, which is generated in cascade displacement events initiated by PKAs. These PKA spectra present the full complexity of the input (to SPECTRA-PKA) nuclear data-library evaluations of recoil events. However, the commonly used displacements per atom (dpa) measure, which is an integral measure over all possible recoil events of the displacement damage dose, is still widely used and has many useful applications - as both a comparative and correlative quantity. This paper describes the methodology employed that allows the SPECTRA-PKA code to evaluate dpa rates using the energy-dependent recoil (PKA) cross section data used for the PKA distributions. This avoids the need for integral displacement kerma cross sections and also provides new insight into the relative importance of different reaction channels (and associated different daughter residual and emitted particles) to the total integrated dpa damage dose. Results are presented for Fe, Ni, W, and SS316. Fusion dpa rates are compared to those in fission, highlighting the increased contribution to damage creation in the former from high-energy threshold reactions.

Validation of DRAGON4/DONJON4 simulation methodology for a typical MNSR by calculating reactivity feedback coefficient and neutron flux

NASA Astrophysics Data System (ADS)

Al Zain, Jamal; El Hajjaji, O.; El Bardouni, T.; Boukhal, H.; Jaï, Otman

2018-06-01

The MNSR is a pool type research reactor, which is difficult to model because of the importance of neutron leakage. The aim of this study is to evaluate a 2-D transport model for the reactor compatible with the latest release of the DRAGON code and 3-D diffusion of the DONJON code. DRAGON code is then used to generate the group macroscopic cross sections needed for full core diffusion calculations. The diffusion DONJON code, is then used to compute the effective multiplication factor (keff), the feedback reactivity coefficients and neutron flux which account for variation in fuel and moderator temperatures as well as the void coefficient have been calculated using the DRAGON and DONJON codes for the MNSR research reactor. The cross sections of all the reactor components at different temperatures were generated using the DRAGON code. These group constants were used then in the DONJON code to calculate the multiplication factor and the neutron spectrum at different water and fuel temperatures using 69 energy groups. Only one parameter was changed where all other parameters were kept constant. Finally, Good agreements between the calculated and measured have been obtained for every of the feedback reactivity coefficients and neutron flux.

Ion Beam Facility at the University of Chile; Applications and Basic Research

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miranda, P. A.; Morales, J. R.; Cancino, S.

2010-08-04

The main characteristics of the ion beam facility based on a 3.75 MeV Van de Graaff accelerator at the University of Chile are described at this work. Current activities are mainly focused on the application of the Ion Beam Analysis techniques for environmental, archaeological, and material science analysis. For instance, Rutherford Backscattering Spectrometry (RBS) is applied to measure thin gold film thickness which are used to determine their resistivity and other electrical properties. At this laboratory the Proton Induced X-Ray Emission (PIXE) and Proton Elastic Scattering Analysis (PESA) methodologies are extensively used for trace element analysis of urban aerosols (Santiago,more » Ciudad de Mexico). A similar study is being carried out at the Antarctica Peninsula. Characterization studies on obsidian and vitreous dacite samples using PIXE has been also perform allowing to match some of these artifacts with geological source sites in Chile.Basic physics research is being carried out by measuring low-energy cross section values for the reactions {sup 63}Cu(d,p){sup 64}Cu and {sup Nat}Zn(p,x){sup 67}Ga. Both radionuclide {sup 64}Cu and {sup 67}Ga are required for applications in medicine. Ongoing stopping power cross section measurements of proton and alphas on Pd, Cu, Bi and Mylar are briefly discussed.« less

[Work-related Stress and the Allostatic Load Index - A Systematic Review].

PubMed

Mauss, D; Li, J; Schmidt, B; Angerer, P; Jarczok, M N

2017-12-01

Work-related stress is a growing social challenge and has been associated with reduced employee health, well-being, and productivity. One tool to measure the stress-related wear and tear of the body is the Allostatic Load Index (ALI). This review summarizes recent evidence on the association between work-related stress and ALI in working adults. A systematic literature search following the PRISMA-Statement was conducted in 21 databases including Medline, PubPsych, MedPilot, and Cochrane Register. Publications addressing work related-stress and medical parameters using ALI were considered. Data on study population, analytic techniques, and results were tabulated. Methodological quality was evaluated using a standardized checklist. 9 articles were identified with a total of 3 532 employees from 5 countries reporting cross-sectional data from the years 2003-2013. Overall, 7 studies reported a positive and significant association between work-related stress and ALI, while 2 studies showed no or an insignificant association. Substantial heterogeneity was observed in methods applied and study quality. This systematic review provides evidence that work-related stress is associated with ALI in cross-sectional studies. This association needs to be demonstrated by future studies using longitudinal data on working populations. © Georg Thieme Verlag KG Stuttgart · New York.

Ion Beam Facility at the University of Chile; Applications and Basic Research

NASA Astrophysics Data System (ADS)

Miranda, P. A.; Morales, J. R.; Cancino, S.; Dinator, M. I.; Donoso, N.; Sepúlveda, A.; Ortiz, P.; Rojas, S.

2010-08-01

The main characteristics of the ion beam facility based on a 3.75 MeV Van de Graaff accelerator at the University of Chile are described at this work. Current activities are mainly focused on the application of the Ion Beam Analysis techniques for environmental, archaeological, and material science analysis. For instance, Rutherford Backscattering Spectrometry (RBS) is applied to measure thin gold film thickness which are used to determine their resistivity and other electrical properties. At this laboratory the Proton Induced X-Ray Emission (PIXE) and Proton Elastic Scattering Analysis (PESA) methodologies are extensively used for trace element analysis of urban aerosols (Santiago, Ciudad de Mexico). A similar study is being carried out at the Antarctica Peninsula. Characterization studies on obsidian and vitreous dacite samples using PIXE has been also perform allowing to match some of these artifacts with geological source sites in Chile. Basic physics research is being carried out by measuring low-energy cross section values for the reactions 63Cu(d,p)64Cu and NatZn(p,x)67Ga. Both radionuclide 64Cu and 67Ga are required for applications in medicine. Ongoing stopping power cross section measurements of proton and alphas on Pd, Cu, Bi and Mylar are briefly discussed.

Measurement of the 234U(n, f ) cross-section with quasi-monoenergetic beams in the keV and MeV range using a Micromegas detector assembly

NASA Astrophysics Data System (ADS)

Stamatopoulos, A.; Kanellakopoulos, A.; Kalamara, A.; Diakaki, M.; Tsinganis, A.; Kokkoris, M.; Michalopoulou, V.; Axiotis, M.; Lagoyiannis, A.; Vlastou, R.

2018-01-01

The 234U neutron-induced fission cross-section has been measured at incident neutron energies of 452, 550, 651 keV and 7.5, 8.7, 10 MeV using the 7Li ( p, n) and the 2H( d, n) reactions, respectively, relative to the 235U( n, f ) and 238U( n, f ) reference reactions. The measurement was performed at the neutron beam facility of the National Center for Scientific Research "Demokritos", using a set-up based on Micromegas detectors. The active mass of the actinide samples and the corresponding impurities were determined via α-spectroscopy using a surface barrier silicon detector. The neutron spectra intercepted by the actinide samples have been thoroughly studied by coupling the NeuSDesc and MCNP5 codes, taking into account the energy and angular straggling of the primary ion beams in the neutron source targets in addition to contributions from competing reactions ( e.g. deuteron break-up) and neutron scattering in the surrounding materials. Auxiliary Monte Carlo simulations were performed making combined use of the FLUKA and GEF codes, focusing particularly on the determination of the fission fragment detection efficiency. The developed methodology and the final results are presented.

Assessing the Knowledge, Attitudes and Behaviors of Human and Animal Health Students towards Antibiotic Use and Resistance: A Pilot Cross-Sectional Study in the UK.

PubMed

Dyar, Oliver James; Hills, Holly; Seitz, Lara-Turiya; Perry, Alex; Ashiru-Oredope, Diane

2018-01-30

The Global Action Plan on Antimicrobial Resistance highlights the importance of training all healthcare professionals. No study has assessed patterns of students' knowledge, attitudes and practices concerning antibiotic use simultaneously across different healthcare course types. We conducted a cross-sectional multi-center survey among UK students. The survey was advertised through local survey coordinators at 25 universities. The online survey was accessible from 10th October to 17th November 2016 (before European Antibiotic Awareness Day). A total of 255 students from 25 universities participated, including students on medicine, pharmacy, nursing, physician associate, dentistry and veterinary medicine courses. Antibiotic resistance was considered to be a more important global challenge than climate change, obesity or food security ( p < 0.001). Most students (95%) believed that antibiotic resistance will be a problem for their future practice, but fewer (69%) thought that the antibiotics they will prescribe, administer or dispense will contribute to the problem. A fifth of students felt they had sufficient knowledge of antibiotic use for their future work. Our exploratory study suggests that UK human and animal healthcare students are aware of the importance of antibiotic resistance, but many still have certain misconceptions. Campaigns and improved educational efforts applying behavioral insights methodology could address these.

West Nile Virus Seroprevalence in the Greek Population in 2013: A Nationwide Cross-Sectional Survey

PubMed Central

Hadjichristodoulou, Christos; Pournaras, Spyros; Mavrouli, Maria; Marka, Andriani; Tserkezou, Persefoni; Baka, Agoritsa; Billinis, Charalambos; Katsioulis, Antonios; Psaroulaki, Anna; Papa, Anna; Papadopoulos, Nikos; Mamuris, Zissis; Tsakris, Athanasios; Kremastinou, Jenny

2015-01-01

Cases of West Nile Virus (WNV) disease were recorded for three consecutive years in Greece following the year 2010 outbreak. A cross-sectional serologic survey was conducted to estimate the WNV seroprevalence and assess the ratio of infection to neuroinvasive disease. A stratified left-over sampling methodology was used including age and residence strata. A total of 3,962 serum samples was collected and tested for WNV Immunoglobulin G (IgG) antibodies by Enzyme–Linked Immunosorbent Assay (ELISA). All positive samples were further tested by Plaque Reduction Neutralization Test (PRNT) and WNV Immunoglobulin M (IgM) antibodies. WNV IgG antibodies were detected in 82 samples and 61 were also positive in PRNT representing a weighted seroprevalence of 2.1% (95% C.I.: 1.7–2.6) and 1.5% (95% C.I.: 1.2–2.0), respectively. Multivariable analysis showed that seroprevalence was associated with age and residence. The overall ratio of neuroinvasive disease to infected persons was estimated at 1:376 (95% C.I.: 1:421–1:338), while the elderly people had the highest ratio. This nationwide study provided valuable data regarding the epidemiology of WNV in Greece based on the fact that elderly people have higher risk of being both infected and having severe disease. PMID:26605539

A Large-scale Cross-sectional Study of ALK Rearrangements and EGFR Mutations in Non-small-cell Lung Cancer in Chinese Han Population

PubMed Central

Hong, Shaodong; Fang, Wenfeng; Hu, Zhihuang; Zhou, Ting; Yan, Yue; Qin, Tao; Tang, Yanna; Ma, Yuxiang; Zhao, Yuanyuan; Xue, Cong; Huang, Yan; Zhao, Hongyun; Zhang, Li

2014-01-01

The predictive power of age at diagnosis and smoking history for ALK rearrangements and EGFR mutations in non-small-cell lung cancer (NSCLC) remains not fully understood. In this cross-sectional study, 1160 NSCLC patients were prospectively enrolled and genotyped for EML4-ALK rearrangements and EGFR mutations. Multivariate logistic regression analysis was performed to explore the association between clinicopathological features and these two genetic aberrations. Receiver operating characteristic (ROC) curves methodology was applied to evaluate the predictive value. We showed that younger age at diagnosis was the only independent variable associated with EML4-ALK rearrangements (odds ratio (OR) per 5 years' increment, 0.68; p < 0.001), while lower tobacco exposure (OR per 5 pack-years' increment, 0.88; p < 0.001), adenocarcinoma (OR, 6.61; p < 0.001), and moderate to high differentiation (OR, 2.05; p < 0.001) were independently associated with EGFR mutations. Age at diagnosis was a very strong predictor of ALK rearrangements but poorly predicted EGFR mutations, while smoking pack-years may predict the presence of EGFR mutations and ALK rearrangements but with rather limited power. These findings should assist clinicians in assessing the likelihood of EML4-ALK rearrangements and EGFR mutations and understanding their biological implications in NSCLC. PMID:25434695

Longitudinal associations between key dietary behaviors and weight gain over time: Transitions through the adolescent years

PubMed Central

Laska, Melissa N.; Murray, David M.; Lytle, Leslie A.; Harnack, Lisa J.

2012-01-01

Previous studies have yielded inconsistent results in documenting the association between key dietary factors and adolescent weight change over time. The purpose of this study was to examine the extent to which changes in adolescent sugar-sweetened beverage, diet soda, breakfast and fast food consumption were associated with changes in BMI and percent body fat (PBF), both cross-sectionally and longitudinally. Our sample included 693 Minnesota adolescents followed over two years. Adjusting for physical activity, puberty, race, socio-economic status, age, and total energy intake, cross-sectional findings indicated that for both males and females, diet soda consumption was significantly and positively associated with BMI and PBF, and breakfast intake was significantly and negatively associated with BMI and PBF among girls. In longitudinal analyses, however, there were no significant associations after adjusting for the number of tests performed. This study adds to previous research through its methodological strengths, including adjustment for physical activity and energy intake assessed using state-of-the-art methods (i.e., accelerometers and 24-hour dietary recalls), as well as its evaluation of both BMI and PBF. Additional research is needed to better understand the complex constellation of factors that contribute to adolescent weight gain over time. PMID:21701567

S-SIMS and MetA-SIMS study of organic additives in thin polymer coatings

NASA Astrophysics Data System (ADS)

Adriaensen, L.; Vangaever, F.; Lenaerts, J.; Gijbels, R.

2006-07-01

In the present study a methodology for TOF-S-SIMS measurements is developed to gain information on the distribution of molecules on and in polymer coatings (thickness ˜100 μm). Experiments were carried out on model systems consisting of one or more additive-containing polyvinylbutyral coatings. Several organic additives were selected: carbocyanine dyes, basonyl blue and the pharmaceutical risperidone. The additives have been measured as pure compounds on a Si substrate to obtain good reference spectra. After optimisation of the sample preparation method, the coatings were embedded in epoxy resin and stored in an oven (60 °C) for 24 h. Cross-sections were made by means of a microtome. S-SIMS spectra were taken on the prepared cross-sections before and after Au was deposited on the sample surface. Compared to the untreated samples, the Au covered samples give rise to more intense secondary ion signals. Generally, signals of the intact cations were more intense than those of the fragment ions. Apart from mass spectra, images of the additive distribution in the coatings could also be acquired by recording structural ion signals. It was possible to make secondary ion images of the additive molecule ions with a (sub)-micrometer lateral resolution.

Correlation between gut microbiota and personality in adults: A cross-sectional study.

PubMed

Kim, Han-Na; Yun, Yeojun; Ryu, Seungho; Chang, Yoosoo; Kwon, Min-Jung; Cho, Juhee; Shin, Hocheol; Kim, Hyung-Lae

2018-03-01

Personality affects fundamental behavior patterns and has been related with health outcomes and mental disorders. Recent evidence has emerged supporting a relationship between the microbiota and behavior, referred to as brain-gut relationships. Here, we first report correlations between personality traits and gut microbiota. This research was performed using the Revised NEO Personality Inventory and the sequencing data of the 16S rRNA gene in 672 adults. The diversity and the composition of the human gut microbiota exhibited significant difference when stratified by personality traits. We found that personality traits were significantly correlated with diversity of gut microbiota, while their differences were extremely subtle. High neuroticism and low conscientiousness groups were correlated with high abundance of Gammaproteobacteria and Proteobacteria, respectively when covariates, including age, sex, BMI and nutrient intake, were controlled. Additionally, high conscientiousness group also showed increased abundance of some universal butyrate-producing bacteria including Lachnospiraceae. This study was of observational and cross-sectional design and our findings must be further validated through metagenomic or metatranscriptomic methodologies, or metabolomics-based analyses. Our findings will contribute to elucidating potential links between the gut microbiota and personality, and provide useful insights toward developing and testing personality- and microbiota-based interventions for promoting health. Copyright © 2017. Published by Elsevier Inc.

The Strengthening the Reporting of Observational Studies in Epidemiology (STROBE) Statement: guidelines for reporting observational studies.

PubMed

von Elm, Erik; Altman, Douglas G; Egger, Matthias; Pocock, Stuart J; Gøtzsche, Peter C; Vandenbroucke, Jan P

2014-12-01

Much biomedical research is observational. The reporting of such research is often inadequate, which hampers the assessment of its strengths and weaknesses and of a study's generalisability. The Strengthening the Reporting of Observational Studies in Epidemiology (STROBE) Initiative developed recommendations on what should be included in an accurate and complete report of an observational study. We defined the scope of the recommendations to cover three main study designs: cohort, case-control, and cross-sectional studies. We convened a 2-day workshop in September 2004, with methodologists, researchers, and journal editors to draft a checklist of items. This list was subsequently revised during several meetings of the coordinating group and in e-mail discussions with the larger group of STROBE contributors, taking into account empirical evidence and methodological considerations. The workshop and the subsequent iterative process of consultation and revision resulted in a checklist of 22 items (the STROBE Statement) that relate to the title, abstract, introduction, methods, results, and discussion sections of articles. 18 items are common to all three study designs and four are specific for cohort, case-control, or cross-sectional studies. A detailed Explanation and Elaboration document is published separately and is freely available on the Web sites of PLoS Medicine, Annals of Internal Medicine, and Epidemiology. We hope that the STROBE Statement will contribute to improving the quality of reporting of observational studies. Copyright © 2014 The Authors. Published by Elsevier Ltd.. All rights reserved.

Four-Year Cross-Lagged Associations between Physical and Mental Health in the Medical Outcomes Study.

ERIC Educational Resources Information Center

Hays, Ron D.; And Others

1994-01-01

Applied structural equation modeling to evaluation of cross-lagged panel models. Self-reports of physical and mental health at three time points spanning four-year interval were analyzed to illustrate cross-lagged analysis methodology. Data were analyzed from 856 patients with hypertension, diabetes, heart disease, or depression. Cross-lagged…

Proton-Nucleus Elastic Cross Sections Using Two-Body In-Medium Scattering Amplitudes

NASA Technical Reports Server (NTRS)

Tripathi, R. K.; Wilson, John W.; Cucinotta, Francis A.

2001-01-01

Recently, a method was developed of extracting nucleon-nucleon (NN) cross sections in the medium directly from experiment. The in-medium NN cross sections form the basic ingredients of several heavy-ion scattering approaches including the coupled-channel approach developed at the Langley Research Center. The ratio of the real to the imaginary part of the two-body scattering amplitude in the medium was investigated. These ratios are used in combination with the in-medium NN cross sections to calculate elastic proton-nucleus cross sections. The agreement is excellent with the available experimental data. These cross sections are needed for the radiation risk assessment of space missions.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Singh, Suvam; Naghma, Rahla; Kaur, Jaspreet

The total and ionization cross sections for electron scattering by benzene, halobenzenes, toluene, aniline, and phenol are reported over a wide energy domain. The multi-scattering centre spherical complex optical potential method has been employed to find the total elastic and inelastic cross sections. The total ionization cross section is estimated from total inelastic cross section using the complex scattering potential-ionization contribution method. In the present article, the first theoretical calculations for electron impact total and ionization cross section have been performed for most of the targets having numerous practical applications. A reasonable agreement is obtained compared to existing experimental observationsmore » for all the targets reported here, especially for the total cross section.« less

Temperature dependence of the HNO3 UV absorption cross sections

NASA Technical Reports Server (NTRS)

Burkholder, James B.; Talukdar, Ranajit K.; Ravishankara, A. R.; Solomon, Susan

1993-01-01

The temperature dependence of the HNO3 absorption cross sections between 240 and 360 K over the wavelength range 195 to 350 nm has been measured using a diode array spectrometer. Absorption cross sections were determined using both (1) absolute pressure measurements at 298 K and (2) a dual absorption cell arrangement in which the absorption spectrum at various temperatures is measured relative to the room temperature absorption spectrum. The HNO3 absorption spectrum showed a temperature dependence which is weak at short wavelengths but stronger at longer wavelengths which are important for photolysis in the lower stratosphere. The 298 K absorption cross sections were found to be larger than the values currently recommended for atmospheric modeling (DeMore et al., 1992). Our absorption cross section data are critically compared with the previous measurements of both room temperature and temperature-dependent absorption cross sections. Temperature-dependent absorption cross sections of HNO3 are recommended for use in atmospheric modeling. These temperature dependent HNO3 absorption cross sections were used in a two-dimensional dynamical-photochemical model to demonstrate the effects of the revised absorption cross sections on loss rate of HNO3 and the abundance of NO2 in the stratosphere.

Cross sections for direct and dissociative ionization of NH3 and CS2 by electron impact

NASA Technical Reports Server (NTRS)

Rao, M. V. V. S.; Srivastava, S. K.

1991-01-01

A crossed electron beam-molecular beam collision geometry is used to measure cross sections for the production of positive ions by electron impact on NH3 and CS2. Ionization cross-section data for NH3 and the values of various cross sections are presented, as well as ionization efficiency curves for CS2. Considerable differences are found between the various results on NH3. The present values are close to the data of Djuric et al. (1981). The semiempirical calculations of Hare and Meath (1987) differ considerably in the absolute values of cross sections. Discrepancies were observed in comparisons of cross sections of other fragment ions resulting from the ionization and dissociate ionization of NH3.

Use of evidence-based practice in an aid organisation: a proposal to deal with the variety in terminology and methodology.

PubMed

De Buck, Emmy; Pauwels, Nele S; Dieltjens, Tessa; Vandekerckhove, Philippe

2014-03-01

As part of its strategy Belgian Red Cross-Flanders underpins all its activities with evidence-based guidelines and systematic reviews. The aim of this publication is to describe in detail the methodology used to achieve this goal within an action-oriented organisation, in a timely and cost-effective way. To demonstrate transparency in our methods, we wrote a methodological charter describing the way in which we develop evidence-based materials to support our activities. Criteria were drawn up for deciding on project priority and the choice of different types of projects (scoping reviews, systematic reviews and evidence-based guidelines). While searching for rigorous and realistically attainable methodological standards, we encountered a wide variety in terminology and methodology used in the field of evidence-based practice. Terminologies currently being used by different organisations and institutions include systematic reviews, systematic literature searches, evidence-based guidelines, rapid reviews, pragmatic systematic reviews, and rapid response service. It is not always clear what the definition and methodology is behind these terms and whether they are used consistently. We therefore describe the terminology and methodology used by Belgian Red Cross-Flanders; criteria for making methodological choices and details on the methodology we use are given. In our search for an appropriate methodology, taking into account time and resource constraints, we encountered an enormous variety of methodological approaches and terminology used for evidence-based materials. In light of this, we recommend that authors of evidence-based guidelines and reviews are transparent and clear about the methodology used. To be transparent about our approach, we developed a methodological charter. This charter may inspire other organisations that want to use evidence-based methodology to support their activities.

Nuclear Forensics and Radiochemistry: Cross Sections

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rundberg, Robert S.

The neutron activation of components in a nuclear device can provide useful signatures of weapon design or sophistication. This lecture will cover some of the basics of neutron reaction cross sections. Nuclear reactor cross sections will also be presented to illustrate the complexity of convolving neutron energy spectra with nuclear excitation functions to calculate useful effective reactor cross sections. Deficiencies in the nuclear database will be discussed along with tools available at Los Alamos to provide new neutron cross section data.

Fragmentation Cross Sections of Medium-Energy 35Cl, 40Ar, and 48TiBeams on Elemental Targets

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zeitlin, C.; Guetersloh, S.; Heilbronn, L.

Charge-changing and fragment production cross sections at 0degrees have been obtained for interactions of 290, 400, and 650MeV/nucleon 40Ar beams, 650 and 1000 MeV/nucleon 35Cl beams, and a 1000MeV/nucleon 48Ti beam. Targets of C, CH2, Al, Cu, Sn, and Pb were used.Using standard analysis methods, we obtain fragment cross sections forcharges as low as 8 for Cl and Ar beams, and as low as 10 for the Tibeam. Using data obtained with small-acceptance detectors, we reportfragment production cross sections for charges as low as 5, corrected foracceptance using a simple model of fragment angular distributions. Withthe lower-charged fragment cross sections,more » we cancompare the data topredictions from several models (including NUCFRG2, EPAX2, and PHITS) ina region largely unexplored in earlier work. As found in earlier workwith other beams, NUCFRG2 and PHITS predictions agree reasonably wellwith the data for charge-changing cross sections, but do not accuratelypredict the fragment production cross sections. The cross sections forthe lightest fragments demonstrate the inadequacy of several models inwhich the cross sections fall monotonically with the charge of thefragment. PHITS, despite not agreeing particularly well with the fragmentproduction cross sections on average, nonetheless qualitativelyreproduces somesignificant features of the data that are missing from theother models.« less

Cross section and γ-ray spectra for U238(n,γ) measured with the DANCE detector array at the Los Alamos Neutron Science Center

NASA Astrophysics Data System (ADS)

Ullmann, J. L.; Kawano, T.; Bredeweg, T. A.; Couture, A.; Haight, R. C.; Jandel, M.; O'Donnell, J. M.; Rundberg, R. S.; Vieira, D. J.; Wilhelmy, J. B.; Becker, J. A.; Chyzh, A.; Wu, C. Y.; Baramsai, B.; Mitchell, G. E.; Krtička, M.

2014-03-01

Background: Accurate knowledge of the U238(n,γ) cross section is important for developing theoretical nuclear reaction models and for applications. However, capture cross sections are difficult to calculate accurately and often must be measured. Purpose: We seek to confirm previous measurements and test cross-section calculations with an emphasis on the unresolved resonance region from 1 to 500 keV. Method: Cross sections were measured from 10 eV to 500 keV using the DANCE detector array at the LANSCE spallation neutron source. The measurements used a thin target, 48 mg/cm2 of depleted uranium. Gamma cascade spectra were also measured to provide an additional constraint on calculations. The data are compared to cross-section calculations using the code CoH3 and cascade spectra calculations made using the code dicebox. Results: This new cross-section measurement confirms the previous data. The measured gamma-ray spectra suggest the need for additional low-lying dipole strength in the radiative strength function. New Hauser-Feshbach calculations including this strength accurately predict the capture cross section without renormalization. Conclusions: The present cross-section data confirm previous measurements. Including additional low-lying dipole strength in the radiative strength function may lead to more accurate cross-section calculations in nuclei where <Γγ> has not been measured.

Quasi-simultaneous Measurements of Ionic Currents by Vibrating Probe and pH Distribution by Ion-selective Microelectrode

DOE Office of Scientific and Technical Information (OSTI.GOV)

Isaacs, H.S.; Lamaka, S.V.; Taryba, M.

2011-01-01

This work reports a new methodology to measure quasi-simultaneously the local electric fields and the distribution of specific ions in a solution via selective microelectrodes. The field produced by the net electric current was detected using the scanning vibrating electrode technique (SVET) with quasi-simultaneous measurements of pH with an ion-selective microelectrode (pH-SME). The measurements were performed in a validation cell providing a 48 ?m diameter Pt wire cross section as a source of electric current. A time lag between acquiring each current density and pH data-point was 1.5 s due to the response time of pH-SME. The quasi-simultaneous SVET-pH measurementsmore » that correlate electrochemical oxidation-reduction processes with acid-base chemical equilibria are reported for the first time. No cross-talk between the vibrating microelectrode and the ion-selective microelectrode could be detected under given experimental conditions.« less

Cross Border Comparison of MRSA Bacteraemia between The Netherlands and North Rhine-Westphalia (Germany): A Cross-Sectional Study

PubMed Central

van Cleef, Brigitte A. G. L.; Kluytmans, Jan A. J. W.; van Benthem, Birgit H. B.; Haenen, Anja; Monen, Jos; Daniels-Haardt, Inka; Jurke, Annette; Friedrich, Alexander W.

2012-01-01

Background We describe the impact of methicillin-resistant Staphylococcus aureus (MRSA) in two neighbouring regions in Europe with a comparable population size, North Rhine-Westphalia (NRW) in Germany and the Netherlands. Methodology/Principal Findings We compared the occurrence of MRSA in blood cultures from surveillance systems. In the Netherlands in 2009, 14 of 1,510 (0.9%) Staphylococcus aureus bacteraemia episodes under surveillance were MRSA. Extrapolation using the number of clinical admissions results in a total of 29 MRSA bacteraemia episodes in the Netherlands or 1.8 episodes per 1,000,000 inhabitants. In 2010 in NRW, 1,029 MRSA bacteraemias were reported, resulting in 57.6 episodes of MRSA bacteraemia per 1,000,000 inhabitants: a 32-fold higher incidence than in the Netherlands. Conclusion/Significance Based on an estimated attributable mortality of 15%, the Dutch approach would save approximately 150 lives per year by the prevention of bacteraemia only. PMID:22880109

High resolution absorption cross sections in the transmission window region of the Schumann-Runge bands and Herzberg continuum of O2

NASA Technical Reports Server (NTRS)

Yoshino, K.; Esmond, J. R.; Cheung, A. S.-C.; Freeman, D. E.; Parkinson, W. H.

1992-01-01

Results are presented on measurements, conducted in the wavelength region 180-195 nm, and at different pressures of oxygen (between 2.5-760 torr) in order to separate the pressure-dependent absorption from the main cross sections, of the absorption cross sections of the Schumann-Runge bands in the window region between the rotational lines of S-R bands of O2. The present cross sections supersede the earlier published cross sections (Yoshino et al., 1983). The combined cross sections are presented graphically; they are available at wavenumber intervals of about 0.1/cm from the National Space Science Data Center. The Herzberg continuum cross sections are derived after subtracting calculated contributions from the Schumann-Runge bands. These are significantly smaller than any previous measurements.

CEPXS

DOE Office of Scientific and Technical Information (OSTI.GOV)

2015-10-19

CEPXS is a multigroup-Legendre cross-section generating code. The cross sections produced by CEPXS enable coupled electron-photon transport calculations to be performed with multigroup radiation transport codes, e.g. MITS and SCEPTRE. CEPXS generates multigroup-Legendre cross sections for photons, electrons and positrons over the energy range from 100 MeV to 1.0 keV. The continuous slowing-down approximation is used for those electron interactions that result in small-energy losses. The extended transport correction is applied to the forward-peaked elastic scattering cross section for electrons. A standard multigroup-Legendre treatment is used for the other coupled electron-photon cross sections. CEPXS extracts electron cross-section information from themore » DATAPAC data set and photon cross-section information from Biggs-Lighthill data. The model that is used for ionization/relaxation in CEPXS is essentially the same as that employed in ITS.« less

Partial Photoneutron Cross Sections for 207,208Pb

NASA Astrophysics Data System (ADS)

Kondo, T.; Utsunomiya, H.; Goriely, S.; Iwamoto, C.; Akimune, H.; Yamagata, T.; Toyokawa, H.; Harada, H.; Kitatani, F.; Lui, Y.-W.; Hilaire, S.; Koning, A. J.

2014-05-01

Using linearly-polarized laser-Compton scattering γ-rays, partial E1 and M1 photoneutron cross sections along with total cross sections were determined for 207,208Pb at four energies near neutron threshold by measuring anisotropies in photoneutron emission. Separately, total photoneutron cross sections were measured for 207,208Pb with a high-efficiency 4π neutron detector. The partial cross section measurement provides direct evidence for the presence of pygmy dipole resonance (PDR) in 207,208Pb in the vicinity of neutron threshold. The strength of PDR amounts to 0.32%-0.42% of the Thomas-Reiche-Kuhn sum rule. Several μN2 units of B(M1)↑ strength were observed in 207,208Pb just above neutron threshold, which correspond to M1 cross sections less than 10% of the total photoneutron cross sections.

Improving Face Verification in Photo Albums by Combining Facial Recognition and Metadata With Cross-Matching

DTIC Science & Technology

2017-12-01

satisfactory performance. We do not use statistical models, and we do not create patterns that require supervised learning. Our methodology is intended...statistical models, and we do not create patterns that require supervised learning. Our methodology is intended for use in personal digital image...THESIS MOTIVATION .........................................................................19 III. METHODOLOGY

Examining a Social-Participatory Youth Co-Researcher Methodology: A Cross-Case Analysis Extending Possibilities of Literacy and Research

ERIC Educational Resources Information Center

Watson, Vaughn W. M.; Marciano, Joanne E.

2015-01-01

At a time when youth are increasingly negotiating new media literacy practices across multiple contexts, literacy researchers are compelled to take notice and reconsider methodologies that centre the researcher, to purposefully engage youth's knowledge, identities and new media literacies as research methodologies. To that end, the authors…

3D methodology for evaluating rail crossing roughness : vehicle dynamic modeling.

DOT National Transportation Integrated Search

2015-09-28

In order for the results of the approach to be useful in decision making, one must consider that the accelerations (modeled or measured) at a rail crossing location can derive from either condition or construction of the crossing. That is to say, a c...

[Health survey in Quilombola communities (descendants of Afro-Brazilian slaves who escaped from slave plantations that existed in Brazil until abolition in 1888) in Vitória da Conquista in the state of Bahia (COMQUISTA Project), Brazil: methodological aspects and descriptive analysis].

PubMed

Bezerra, Vanessa Moraes; Medeiros, Danielle Souto de; Gomes, Karine de Oliveira; Souzas, Raquel; Giatti, Luana; Steffens, Ana Paula; Kochergin, Clavdia Nicolaevna; Souza, Cláudio Lima; Moura, Cristiano Soares de; Soares, Daniela Arruda; Santos, Luis Rogério Cosme Silva; Cardoso, Luiz Gustavo Vieira; Oliveira, Márcio Vasconcelos de; Martins, Poliana Cardoso; Neves, Orlando Sílvio Caires; Guimarães, Mark Drew Crosland

2014-06-01

The scope of this article was to present the methodology, preliminary descriptive results and the reliability of the instruments used in the COMQUISTA Project. It involved a cross-sectional study with adults (>18 years) and children (up to 5 years old) of Quilombola communities in Vitória da Conquista, Bahia. Data collection consisted of individual and household interviews, anthropometric and blood pressure measurements. A semi-structured questionnaire adapted from the Brazilian National Health Survey (PNS) was used and the interviews were conducted using handheld computers. 397 housing units were visited and 797 adults and 130 children were interviewed. The demographic profile of the Quilombolas was similar to the Brazilian population with respect to sex and age, however, they had precarious access to basic sanitation and a low socioeconomic status. The analysis of reliability revealed the adequacy of strategies adopted for quality assurance and control in the study. The methodology used was considered adequate to achieve the objectives and can be used in other populations. The results indicate the need for implementing strategies to improve the quality of life and reduce the degree of vulnerability of the Quilombolas.

Evaluation of complex community-based childhood obesity prevention interventions.

PubMed

Karacabeyli, D; Allender, S; Pinkney, S; Amed, S

2018-05-16

Multi-setting, multi-component community-based interventions have shown promise in preventing childhood obesity; however, evaluation of these complex interventions remains a challenge. The objective of the study is to systematically review published methodological approaches to outcome evaluation for multi-setting community-based childhood obesity prevention interventions and synthesize a set of pragmatic recommendations. MEDLINE, CINAHL and PsycINFO were searched from inception to 6 July 2017. Papers were included if the intervention targeted children ≤18 years, engaged at least two community sectors and described their outcome evaluation methodology. A single reviewer conducted title and abstract scans, full article review and data abstraction. Directed content analysis was performed by three reviewers to identify prevailing themes. Thirty-three studies were included, and of these, 26 employed a quasi-experimental design; the remaining were randomized control trials. Body mass index was the most commonly measured outcome, followed by health behaviour change and psychosocial outcomes. Six themes emerged, highlighting advantages and disadvantages of active vs. passive consent, quasi-experimental vs. randomized control trials, longitudinal vs. repeat cross-sectional designs and the roles of process evaluation and methodological flexibility in evaluating complex interventions. Selection of study designs and outcome measures compatible with community infrastructure, accompanied by process evaluation, may facilitate successful outcome evaluation. © 2018 World Obesity Federation.

FY2012 summary of tasks completed on PROTEUS-thermal work.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lee, C.H.; Smith, M.A.

2012-06-06

PROTEUS is a suite of the neutronics codes, both old and new, that can be used within the SHARP codes being developed under the NEAMS program. Discussion here is focused on updates and verification and validation activities of the SHARP neutronics code, DeCART, for application to thermal reactor analysis. As part of the development of SHARP tools, the different versions of the DeCART code created for PWR, BWR, and VHTR analysis were integrated. Verification and validation tests for the integrated version were started, and the generation of cross section libraries based on the subgroup method was revisited for the targetedmore » reactor types. The DeCART code has been reorganized in preparation for an efficient integration of the different versions for PWR, BWR, and VHTR analysis. In DeCART, the old-fashioned common blocks and header files have been replaced by advanced memory structures. However, the changing of variable names was minimized in order to limit problems with the code integration. Since the remaining stability problems of DeCART were mostly caused by the CMFD methodology and modules, significant work was performed to determine whether they could be replaced by more stable methods and routines. The cross section library is a key element to obtain accurate solutions. Thus, the procedure for generating cross section libraries was revisited to provide libraries tailored for the targeted reactor types. To improve accuracy in the cross section library, an attempt was made to replace the CENTRM code by the MCNP Monte Carlo code as a tool obtaining reference resonance integrals. The use of the Monte Carlo code allows us to minimize problems or approximations that CENTRM introduces since the accuracy of the subgroup data is limited by that of the reference solutions. The use of MCNP requires an additional set of libraries without resonance cross sections so that reference calculations can be performed for a unit cell in which only one isotope of interest includes resonance cross sections, among the isotopes in the composition. The OECD MHTGR-350 benchmark core was simulated using DeCART as initial focus of the verification/validation efforts. Among the benchmark problems, Exercise 1 of Phase 1 is a steady-state benchmark case for the neutronics calculation for which block-wise cross sections were provided in 26 energy groups. This type of problem was designed for a homogenized geometry solver like DIF3D rather than the high-fidelity code DeCART. Instead of the homogenized block cross sections given in the benchmark, the VHTR-specific 238-group ENDF/B-VII.0 library of DeCART was directly used for preliminary calculations. Initial results showed that the multiplication factors of a fuel pin and a fuel block with or without a control rod hole were off by 6, -362, and -183 pcm Dk from comparable MCNP solutions, respectively. The 2-D and 3-D one-third core calculations were also conducted for the all-rods-out (ARO) and all-rods-in (ARI) configurations, producing reasonable results. Figure 1 illustrates the intermediate (1.5 eV - 17 keV) and thermal (below 1.5 eV) group flux distributions. As seen from VHTR cores with annular fuels, the intermediate group fluxes are relatively high in the fuel region, but the thermal group fluxes are higher in the inner and outer graphite reflector regions than in the fuel region. To support the current project, a new three-year I-NERI collaboration involving ANL and KAERI was started in November 2011, focused on performing in-depth verification and validation of high-fidelity multi-physics simulation codes for LWR and VHTR. The work scope includes generating improved cross section libraries for the targeted reactor types, developing benchmark models for verification and validation of the neutronics code with or without thermo-fluid feedback, and performing detailed comparisons of predicted reactor parameters against both Monte Carlo solutions and experimental measurements. The following list summarizes the work conducted so far for PROTEUS-Thermal Tasks: Unification of different versions of DeCART was initiated, and at the same time code modernization was conducted to make code unification efficient; (2) Regeneration of cross section libraries was attempted for the targeted reactor types, and the procedure for generating cross section libraries was updated by replacing CENTRM with MCNP for reference resonance integrals; (3) The MHTGR-350 benchmark core was simulated using DeCART with VHTR-specific 238-group ENDF/B-VII.0 library, and MCNP calculations were performed for comparison; and (4) Benchmark problems for PWR and BWR analysis were prepared for the DeCART verification/validation effort. In the coming months, the work listed above will be completed. Cross section libraries will be generated with optimized group structures for specific reactor types.« less

Interpreting the three-dimensional orientation of vascular canals and cross-sectional geometry of cortical bone in birds and bats.

PubMed

Pratt, Isaac V; Johnston, James D; Walker, Ernie; Cooper, David M L

2018-06-01

Cortical bone porosity and specifically the orientation of vascular canals is an area of growing interest in biomedical research and comparative/paleontological anatomy. The potential to explain microstructural adaptation is of great interest. However, the determinants of the development of canal orientation remain unclear. Previous studies of birds have shown higher proportions of circumferential canals (called laminarity) in flight bones than in hindlimb bones, and interpreted this as a sign that circumferential canals are a feature for resistance to the torsional loading created by flight. We defined the laminarity index as the percentage of circumferential canal length out of the total canal length. In this study we examined the vascular canal network in the humerus and femur of a sample of 31 bird and 24 bat species using synchrotron micro-computed tomography (micro-CT) to look for a connection between canal orientation and functional loading. The use of micro-CT provides a full three-dimensional (3D) map of the vascular canal network and provides measurements of the 3D orientation of each canal in the whole cross-section of the bone cortex. We measured several cross-sectional geometric parameters and strength indices including principal and polar area moments of inertia, principal and polar section moduli, circularity, buckling ratio, and a weighted cortical thickness index. We found that bat cortices are relatively thicker and poorly vascularized, whereas those of birds are thinner and more highly vascularized, and that according to our cross-sectional geometric parameters, bird bones have a greater resistance to torsional stress than the bats; in particular, the humerus in birds is more adapted to resist torsional stresses than the femur. Our results show that birds have a significantly (P = 0.031) higher laminarity index than bats, with birds having a mean laminarity index of 0.183 in the humerus and 0.232 in the femur, and bats having a mean laminarity index of 0.118 in the humerus and 0.119 in the femur. Counter to our expectation, the birds had a significantly higher laminarity index in the femur than in the humerus (P = 0.035). To evaluate whether this discrepancy was a consequence of methodology we conducted a comparison between our 3D method and an analogue to two-dimensional (2D) histological measurements. This comparison revealed that 2D methods significantly underestimate (P < 0.001) the amount of longitudinal canals by an average of 20% and significantly overestimate (P < 0.001) the laminarity index by an average of 7.7%, systematically mis-estimating indices of vascular canal orientations. In comparison with our 3D results, our approximated 2D measurement had the same results for comparisons between the birds and bats but found significant differences only in the longitudinal index between the humerus and the femur for both groups. The differences between our 3D and pseudo-2D results indicate that differences between our findings and the literature may be partially based in methodology. Overall, our results do not support the hypothesis that the bones of flight are more laminar, suggesting a complex relation between functional loading and microstructural adaptation. © 2018 The Authors. Journal of Anatomy published by John Wiley & Sons Ltd on behalf of Anatomical Society.

Geologic Cross Section D-D' Through the Appalachian Basin from the Findlay Arch, Sandusky County, Ohio, to the Valley and Ridge Province, Hardy County, West Virginia

USGS Publications Warehouse

Ryder, Robert T.; Crangle, Robert D.; Trippi, Michael H.; Swezey, Christopher S.; Lentz, Erika E.; Rowan, Elisabeth L.; Hope, Rebecca S.

2009-01-01

Geologic cross section D-D' is the second in a series of cross sections constructed by the U.S. Geological Survey to document and improve understanding of the geologic framework and petroleum systems of the Appalachian basin. Cross section D-D' provides a regional view of the structural and stratigraphic framework of the Appalachian basin from the Findlay arch in northwestern Ohio to the Valley and Ridge province in eastern West Virginia, a distance of approximately 290 miles. The information shown on the cross section is based on geological and geophysical data from 13 deep drill holes, several of which penetrate the Paleozoic sedimentary rocks of the basin and bottom in Mesoproterozoic (Grenville-age) crystalline basement rocks. This cross section is a companion to cross section E-E' (Ryder and others, 2008) that is located about 25 to 50 mi to the southwest. Although specific petroleum systems in the Appalachian basin are not identified on the cross section, many of their key elements (such as source rocks, reservoir rocks, seals, and traps) can be inferred from lithologic units, unconformities, and geologic structures shown on the cross section. Other aspects of petroleum systems (such as the timing of petroleum generation and preferred migration pathways) may be evaluated by burial history, thermal history, and fluid flow models based on information shown on the cross section. Cross section D-D' lacks the detail to illustrate key elements of coal systems (such as paleoclimate, coal quality, and coal rank), but it does provide a general geologic framework (stratigraphic units and general rock types) for the coal-bearing section. Also, cross section D-D' may be used as a reconnaissance tool to identify plausible geologic structures and strata for the subsurface storage of liquid waste or for the sequestration of carbon dioxide.

Electron impact excitation of SO2 - Differential, integral, and momentum transfer cross sections

NASA Technical Reports Server (NTRS)

Vuskovic, L.; Trajmar, S.

1982-01-01

Electron impact excitation of the electronic states of SO2 was investigated. Differential, integral, and inelastic momentum transfer cross sections were obtained by normalizing the relative measurements to the elastic cross sections. The cross sections are given for seven spectral ranges of the energy-loss spectra extending from the lowest electronic state to near the first ionization limit. Most of the regions represent the overlap of several electronic transitions. No measurements for these cross sections have been reported previously.

Proton-Nucleus Total Cross Sections in Coupled-Channel Approach

NASA Technical Reports Server (NTRS)

Tripathi, R. K.; Wilson, John W.; Cucinotta, Francis A.

2000-01-01

Recently, nucleon-nucleon (N-N) cross sections in the medium have been extracted directly from experiment. The in-medium N-N cross sections form the basic ingredients of several heavy-ion scattering approaches including the coupled-channel approach developed at the Langley Research Center. In the present study the ratio of the real to the imaginary part of the two-body scattering amplitude in the medium was investigated. These ratios are used in combination with the in-medium N-N cross sections to calculate total proton-nucleus cross sections. The agreement is excellent with the available experimental data. These cross sections are needed for the radiation risk assessment of space missions.

Calculation of total electron excitation cross-sections and partial electron ionization cross-sections for the elements. Ph.D. Thesis

NASA Technical Reports Server (NTRS)

Green, T. J.

1973-01-01

Computer programs were used to calculate the total electron excitation cross-section for atoms and the partial ionization cross-section. The approximations to the scattering amplitude used are as follows: (1) Born, Bethe, and Modified Bethe for non-exchange excitation; (2) Ochkur for exchange excitation; and (3) Coulomb-Born of non-exchange ionization. The amplitudes are related to the differential cross-sections which are integrated to give the total excitation (or partial ionization) cross-section for the collision. The atomic wave functions used are Hartree-Fock-Slater functions for bound states and the coulomb wave function for the continuum. The programs are presented and the results are examined.

The research questions and methodological adequacy of clinical studies of the voice and larynx published in Brazilian and international journals.

PubMed

Vieira, Vanessa Pedrosa; De Biase, Noemi; Peccin, Maria Stella; Atallah, Alvaro Nagib

2009-06-01

To evaluate the methodological adequacy of voice and laryngeal study designs published in speech-language pathology and otorhinolaryngology journals indexed for the ISI Web of Knowledge (ISI Web) and the MEDLINE database. A cross-sectional study conducted at the Universidade Federal de São Paulo (Federal University of São Paulo). Two Brazilian speech-language pathology and otorhinolaryngology journals (Pró-Fono and Revista Brasileira de Otorrinolaringologia) and two international speech-language pathology and otorhinolaryngology journals (Journal of Voice, Laryngoscope), all dated between 2000 and 2004, were hand-searched by specialists. Subsequently, voice and larynx publications were separated, and a speech-language pathologist and otorhinolaryngologist classified 374 articles from the four journals according to objective and study design. The predominant objective contained in the articles was that of primary diagnostic evaluation (27%), and the most frequent study design was case series (33.7%). A mere 7.8% of the studies were designed adequately with respect to the stated objectives. There was no statistical difference in the methodological quality of studies indexed for the ISI Web and the MEDLINE database. The studies published in both national journals, indexed for the MEDLINE database, and international journals, indexed for the ISI Web, demonstrate weak methodology, with research poorly designed to meet the proposed objectives. There is much scientific work to be done in order to decrease uncertainty in the field analysed.

Trend analyses in the health behaviour in school-aged children study: methodological considerations and recommendations.

PubMed

Schnohr, Christina W; Molcho, Michal; Rasmussen, Mette; Samdal, Oddrun; de Looze, Margreet; Levin, Kate; Roberts, Chris J; Ehlinger, Virginie; Krølner, Rikke; Dalmasso, Paola; Torsheim, Torbjørn

2015-04-01

This article presents the scope and development of the Health Behaviour in School-aged Children (HBSC) study, reviews trend papers published on international HBSC data up to 2012 and discusses the efforts made to produce reliable trend analyses. The major goal of this article is to present the statistical procedures and analytical strategies for upholding high data quality, as well as reflections from the authors of this article on how to produce reliable trends based on an international study of the magnitude of the HBSC study. HBSC is an international cross-sectional study collecting data from adolescents aged 11-15 years, on a broad variety of health determinants and health behaviours. A number of methodological challenges have stemmed from the growth of the HBSC-study, in particular given that the study has a focus on monitoring trends. Some of those challenges are considered. When analysing trends, researchers must be able to assess whether a change in prevalence is an expression of an actual change in the observed outcome, whether it is a result of methodological artefacts, or whether it is due to changes in the conceptualization of the outcome by the respondents. The article present recommendations to take a number of the considerations into account. The considerations imply methodological challenges, which are core issues in undertaking trend analyses. © The Author 2015. Published by Oxford University Press on behalf of the European Public Health Association. All rights reserved.

Inernational research in health care management: its need in the 21st century, methodological challenges, ethical issues, pitfalls, and practicalities.

PubMed

Buttigieg, Sandra C; Rathert, Cheryl; D'Aunno, Thomas A; Savage, Grant T

2015-01-01

This commentary argues in favor of international research in the 21st century. Advances in technology, science, communication, transport, and infrastructure have transformed the world into a global village. Industries have increasingly adopted globalization strategies. Likewise, the health sector is more internationalized whereby comparisons between diverse health systems, international best practices, international benchmarking, cross-border health care, and cross-cultural issues have become important subjects in the health care literature. The focus has now turned to international, collaborative, cross-national, and cross-cultural research, which is by far more demanding than domestic studies. In this commentary, we explore the methodological challenges, ethical issues, pitfalls, and practicalities within international research and offer possible solutions to address them. The commentary synthesizes contributions from four scholars in the field of health care management, who came together during the annual meeting of the Academy of Management to discuss with members of the Health Care Management Division the challenges of international research. International research is worth pursuing; however, it calls for scholarly attention to key methodological and ethical issues for its success. This commentary addresses salient issues pertaining to international research in one comprehensive account.

Visual methodologies and participatory action research: Performing women's community-based health promotion in post-Katrina New Orleans.

PubMed

Lykes, M Brinton; Scheib, Holly

2016-01-01

Recovery from disaster and displacement involves multiple challenges including accompanying survivors, documenting effects, and rethreading community. This paper demonstrates how African-American and Latina community health promoters and white university-based researchers engaged visual methodologies and participatory action research (photoPAR) as resources in cross-community praxis in the wake of Hurricane Katrina and the flooding of New Orleans. Visual techniques, including but not limited to photonarratives, facilitated the health promoters': (1) care for themselves and each other as survivors of and responders to the post-disaster context; (2) critical interrogation of New Orleans' entrenched pre- and post-Katrina structural racism as contributing to the racialised effects of and responses to Katrina; and (3) meaning-making and performances of women's community-based, cross-community health promotion within this post-disaster context. This feminist antiracist participatory action research project demonstrates how visual methodologies contributed to the co-researchers' cross-community self- and other caring, critical bifocality, and collaborative construction of a contextually and culturally responsive model for women's community-based health promotion post 'unnatural disaster'. Selected limitations as well as the potential for future cross-community antiracist feminist photoPAR in post-disaster contexts are discussed.

Rayleigh scattering cross sections of combustion species at 266, 355, and 532 nm for thermometry applications.

PubMed

Sutton, Jeffrey A; Driscoll, James F

2004-11-15

Rayleigh scattering cross sections are measured for nine combustion species (Ar, N2, O2, CO2, CO, H2, H2O, CH4, and C3H8) at wavelengths of 266, 355, and 532 nm and at temperatures ranging from 295 to 1525 K. Experimental results show that, as laser wavelengths become shorter, polarization effects become important and the depolarization ratio of the combustion species must be accounted for in the calculation of the Rayleigh scattering cross section. Temperature effects on the scattering cross section are also measured. Only a small temperature dependence is measured for cross sections at 355 nm, resulting in a 2-8% increase in cross section at temperatures of 1500 K. This temperature dependence increases slightly for measurements at 266 nm, resulting in a 5-11% increase in cross sections at temperatures of 1450 K.

Cross sections for n+{sup 14}N from an R-matrix analysis of the {sup 15}N system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hale, G.M.; Young, P.G.; Chadwick, M.B.

1994-06-01

As part of the Hiroshima-Nagasaki Dose Reevaluation Program, a new evaluation of the neutron cross sections for {sup 14}N was made for ENDF/B-VI, based at energies below 2.5 MeV on a multichannel R-matrix analysis of reactions in the {sup 15}N system. The types of data used in the analysis, and the resulting cross sections and resonance structure for {sup 15}N are briefly described. The resonant features of the neutron cross sections were especially well determined by including precise, high-resolution neutron total cross section measurements from ORNL. While the new evaluated cross section appear to be significant improvements over the earliermore » ones, they still need to be tested more extensively against recent measurements of the differential elastic cross section from Oak Ridge.« less

Electron impact cross sections for the 2,2P state excitation of lithium

NASA Technical Reports Server (NTRS)

Vuskovic, L.; Trajmar, S.; Register, D. F.

1982-01-01

Electron impact excitation of the 2p 2P state of Li was studied at 10, 20, 60, 100, 150 and 200 eV. Relative differential cross sections in the angular range 3-120 deg were measured and then normalized to the absolute scale by using the optical f value. Integral and momentum transfer cross sections were obtained by extrapolating the differential cross sections to 0 deg and to 180 deg. The question of normalizing electron-metal-atom collision cross sections in general was examined and the method of normalization to optical f values in particular was investigated in detail. It has been concluded that the extrapolation of the apparent generalized oscillator strength (obtained from the measured differential cross sections) to the zero momentum transfer limit with an expression using even powers of the momentum transfer and normalization of the limit to the optical f value yields reliable absolute cross sections.

The 75As(n,2n) Cross Sections into the 74As Isomer and Ground State

DOE Office of Scientific and Technical Information (OSTI.GOV)

Younes, W; Garrett, P E; Becker, J A

2003-06-30

The {sup 75}As(n, 2n) cross section for the population of the T{sub 1/2} = 26.8-ns isomer at E{sub x} = 259.3 keV in {sup 74}As has been measured as a function of incident neutron energy, from threshold to E{sub n} = 20 MeV. The cross section was measured using the GEANIE spectrometer at LANSCE/WNR. For convenience, the {sup 75}As(n, 2n) population cross section for the {sup 74}As ground state has been deduced as the difference between the previously-known (n, 2n) reaction cross section and the newly measured {sup 75}As(n, 2n){sup 74}As{sup m} cross section. The (n, 2n) reaction, ground-state, andmore » isomer population cross sections are tabulated in this paper.« less

Total and partial photoneutron cross sections for Pb isotopes

NASA Astrophysics Data System (ADS)

Kondo, T.; Utsunomiya, H.; Goriely, S.; Daoutidis, I.; Iwamoto, C.; Akimune, H.; Okamoto, A.; Yamagata, T.; Kamata, M.; Itoh, O.; Toyokawa, H.; Lui, Y.-W.; Harada, H.; Kitatani, F.; Hilaire, S.; Koning, A. J.

2012-07-01

Using quasimonochromatic laser-Compton scattering γ rays, total photoneutron cross sections were measured for 206,207,208Pb near neutron threshold with a high-efficiency 4π neutron detector. Partial E1 and M1 photoneutron cross sections along with total cross sections were determined for 207,208Pb at four energies near threshold by measuring anisotropies in photoneutron emission with linearly polarized γ rays. The E1 strength dominates over the M1 strength in the neutron channel where E1 photoneutron cross sections show extra strength of the pygmy dipole resonance in 207,208Pb near the neutron threshold corresponding to 0.32%-0.42% of the Thomas-Reiche-Kuhn sum rule. Several μN2 units of B(M1)↑ strength were observed in 207,208Pb just above neutron threshold, which correspond to an M1 cross section less than 10% of the total photoneutron cross section.

Mutual Relevance of Mainstream and Cross-Cultural Psychology.

ERIC Educational Resources Information Center

Clark, Lee Anna

1987-01-01

Asserts that mainstream and cross-cultural psychology address many of the same basic issues and that cross-cultural studies may be a direct and logical extension of the search for causes of variation in human psychology and psychopathology. Discusses differences in theoretical orientation and methodological approach and barriers to communication…

Mental Visualization of Objects from Cross-Sectional Images

ERIC Educational Resources Information Center

Wu, Bing; Klatzky, Roberta L.; Stetten, George D.

2012-01-01

We extended the classic anorthoscopic viewing procedure to test a model of visualization of 3D structures from 2D cross-sections. Four experiments were conducted to examine key processes described in the model, localizing cross-sections within a common frame of reference and spatiotemporal integration of cross sections into a hierarchical object…

Viscous Flow through Pipes of Various Cross-Sections

ERIC Educational Resources Information Center

Lekner, John

2007-01-01

An interesting variety of pipe cross-sectional shapes can be generated, for which the Navier-Stokes equations can be solved exactly. The simplest cases include the known solutions for elliptical and equilateral triangle cross-sections. Students can find pipe cross-sections from solutions of Laplace's equation in two dimensions, and then plot the…

Activation cross section and isomeric cross section ratio for the 76Ge(n,2n)75m,gGe process

NASA Astrophysics Data System (ADS)

Luo, Junhua; Jiang, Li; Wang, Xinxing

2018-04-01

We measured neutron-induced reaction cross sections for the 76Ge(n,2n)75m,gGe reactions and their isomeric cross section ratios σm/σg at three neutron energies between 13 and 15MeV by an activation and off-line γ-ray spectrometric technique using the K-400 Neutron Generator at the Chinese Academy of Engineering Physics (CAEP). Ge samples and Nb monitor foils were activated together to determine the reaction cross section and the incident neutron flux. The monoenergetic neutron beams were formed via the 3H( d, n)4He reaction. The pure cross section of the ground state was derived from the absolute cross section of the metastable state and the residual nuclear decay analysis. The cross sections were also calculated using the nuclear model code TALYS-1.8 with different level density options at neutron energies varying from the reaction threshold to 20MeV. Results are discussed and compared with the corresponding literature data.

O2 absorption cross sections /187-225 nm/ from stratospheric solar flux measurements

NASA Technical Reports Server (NTRS)

Herman, J. R.; Mentall, J. E.

1982-01-01

The absorption cross sections of molecular oxygen are calculated in the wavelength range from 187 to 230 nm from solar flux measurements obtained within the stratosphere. Within the Herzberg continuum wavelength region the molecular oxygen cross sections are found to be about 30% smaller than the laboratory results of Shardanand and Rao (1977) from 200 to 210 nm and about 50% smaller than those of Hasson and Nicholls (1971). At wavelengths longer than 210 nm the cross sections agree with those of Shardanand and Rao. The effective absorption cross sections of O2 in the Schumann-Runge band region from 187 to 200 nm are calculated and compared to the empirical fit given by Allen and Frederick (1982). The calculated cross sections indicate that the transmissivity of the atmosphere may be underestimated by the use of the Allen and Frederic cross sections between 195 and 200 nm. The ozone column content between 30 and 40 km and the relative ozone cross sections are determined from the same solar flux data set.

Using thermochonology to validate a balanced cross section along the Karnali River, far-western Nepal

NASA Astrophysics Data System (ADS)

Battistella, C.; Robinson, D.; McQuarrie, N.; Ghoshal, S.

2017-12-01

Multiple valid balanced cross sections can be produced from mapped surface and subsurface data. By integrating low temperature thermochronologic data, we are better able to predict subsurface geometries. Existing valid balanced cross section for far western Nepal are few (Robinson et al., 2006) and do not incorporate thermochronologic data because the data did not exist. The data published along the Simikot cross section along the Karnali River since then include muscovite Ar, zircon U-Th/He and apatite fission track. We present new mapping and a new valid balanced cross section that takes into account the new field data as well as the limitations that thermochronologic data places on the kinematics of the cross section. Additional constrains include some new geomorphology data acquired since 2006 that indicate areas of increased vertical uplift, which indicate locations of buried ramps in the Main Himalayan thrust and guide the locations of Lesser Himalayan ramps in the balanced cross section. Future work will include flexural modeling, new low temperature thermochronometic data, and 2-D thermokinematic models from a sequentially forward modeled balanced cross sections in far western Nepal.

Scattered light and accuracy of the cross-section measurements of weak absorptions: Gas and liquid phase UV absorption cross sections of CH3CFCl2

NASA Technical Reports Server (NTRS)

Fahr, A.; Braun, W.; Kurylo, M. J.

1993-01-01

Ultraviolet absorption cross sections of CH3CFCl2(HCFC-141b) were determined in the gas phase (190-260 nm) and liquid phase (230-260 mm) at 298 K. The liquid phase absorption cross sections were then converted into accurate gas phase values using a previously described procedure. It has been demonstrated that scattered light from the shorter-wavelength region (as little as several parts per thousand) can seriously compromise the absorption cross-section measurement, particularly at longer wavelengths where cross sections are low, and can be a source of discrepancies in the cross sections of weakly absorbing halocarbons reported in the literature. A modeling procedure was developed to assess the effect of scattered light on the measured absorption cross section in our experiments, thereby permitting appropriate corrections to be made on the experimental values. Modeled and experimental results were found to be in good agreement. Experimental results from this study were compared with other available determinations and provide accurate input for calculating the atmospheric lifetime of HCFC-141b.

Low-energy proton induced M X-ray production cross sections for 70Yb, 81Tl and 82Pb

NASA Astrophysics Data System (ADS)

Shehla; Mandal, A.; Kumar, Ajay; Roy Chowdhury, M.; Puri, Sanjiv; Tribedi, L. C.

2018-07-01

The cross sections for production of Mk (k = Mξ, Mαβ, Mγ, Mm1) X-rays of 70Yb, 81Tl and 82Pb induced by 50-250 keV protons have been measured in the present work. The experimental cross sections have been compared with the earlier reported values and those calculated using the ionization cross sections based on the ECPSSR (Perturbed (P) stationary(S) state(S), incident ion energy (E) loss, Coulomb (C) deflection and relativistic (R) correction) model, the X-ray emission rates based on the Dirac-Fock model, the fluorescence and Coster-Kronig yields based on the Dirac-Hartree-Slater (DHS) model. In addition, the present measured proton induced X-ray production cross sections have also been compared with those calculated using the Dirac-Hartree-Slater (DHS) model based ionization cross sections and those based on the Plane wave Born Approximation (PWBA). The measured M X-ray production cross sections are, in general, found to be higher than the ECPSSR and DHS model based values and lower than the PWBA model based cross sections.

Positron induced scattering cross sections for hydrocarbons relevant to plasma

NASA Astrophysics Data System (ADS)

Singh, Suvam; Antony, Bobby

2018-05-01

This article explores positron scattering cross sections by simple hydrocarbons such as ethane, ethene, ethyne, propane, and propyne. Chemical erosion processes occurring on the surface due to plasma-wall interactions are an abundant source of hydrocarbon molecules which contaminate the hydrogenic plasma. These hydrocarbons play an important role in the edge plasma region of Tokamak and ITER. In addition to this, they are also one of the major components in the planetary atmospheres and astrophysical mediums. The present work focuses on calculation of different positron impact interactions with simple hydrocarbons in terms of the total cross section (Qtot), elastic cross section (Qel), direct ionization cross section (Qion), positronium formation cross section (Qps), and total ionization cross section (Qtion). Knowing that the positron-plasma study is one of the trending fields, the calculated data have diverse plasma and astrophysical modeling applications. A comprehensive study of Qtot has been provided where the inelastic cross sections have been reported for the first time. Comparisons are made with those available from the literature, and a good agreement is obtained with the measurements.

Structural design of composite rotor blades with consideration of manufacturability, durability, and manufacturing uncertainties

NASA Astrophysics Data System (ADS)

Li, Leihong

A modular structural design methodology for composite blades is developed. This design method can be used to design composite rotor blades with sophisticate geometric cross-sections. This design method hierarchically decomposed the highly-coupled interdisciplinary rotor analysis into global and local levels. In the global level, aeroelastic response analysis and rotor trim are conduced based on multi-body dynamic models. In the local level, variational asymptotic beam sectional analysis methods are used for the equivalent one-dimensional beam properties. Compared with traditional design methodology, the proposed method is more efficient and accurate. Then, the proposed method is used to study three different design problems that have not been investigated before. The first is to add manufacturing constraints into design optimization. The introduction of manufacturing constraints complicates the optimization process. However, the design with manufacturing constraints benefits the manufacturing process and reduces the risk of violating major performance constraints. Next, a new design procedure for structural design against fatigue failure is proposed. This procedure combines the fatigue analysis with the optimization process. The durability or fatigue analysis employs a strength-based model. The design is subject to stiffness, frequency, and durability constraints. Finally, the manufacturing uncertainty impacts on rotor blade aeroelastic behavior are investigated, and a probabilistic design method is proposed to control the impacts of uncertainty on blade structural performance. The uncertainty factors include dimensions, shapes, material properties, and service loads.

Electron induced inelastic and ionization cross section for plasma modeling

NASA Astrophysics Data System (ADS)

Verma, Pankaj; Mahato, Dibyendu; Kaur, Jaspreet; Antony, Bobby

2016-09-01

The present paper reports electron impact total inelastic and ionization cross section for silicon, germanium, and tin tetrahalides at energies varying from ionization threshold of the target to 5000 eV. These cross section data over a wide energy domain are very essential to understand the physico-chemical processes involved in various environments such as plasma modeling, semiconductor etching, atmospheric sciences, biological sciences, and radiation physics. However, the cross section data on the above mentioned molecules are scarce. In the present article, we report the computation of total inelastic cross section using spherical complex optical potential formalism and the estimation of ionization cross section through a semi-empirical method. The present ionization cross section result obtained for SiCl4 shows excellent agreement with previous measurements, while other molecules have not yet been investigated experimentally. Present results show more consistent behaviour than previous theoretical estimates. Besides cross sections, we have also studied the correlation of maximum ionization cross section with the square root of the ratio of polarizability to ionization potential for the molecules with known polarizabilities. A linear relation is observed between these quantities. This correlation is used to obtain approximate polarizability volumes for SiBr4, SiI4, GeCl4, GeBr4, and GeI4 molecules.

Breakup and fusion cross sections of the 6Li nucleus with targets of mass A = 58, 144 and 208

NASA Astrophysics Data System (ADS)

Mukeru, B.; Rampho, G. J.; Lekala, M. L.

2018-04-01

We use the continuum discretized coupled channels method to investigate the effects of continuum-continuum coupling on the breakup and fusion cross sections of the weakly bound 6Li nucleus with the 58Ni, 144Sm and 208Pb nuclear targets. The cross sections were analyzed at incident energies E cm below, close to and above the Coulomb barrier V B. We found that for the medium and heavy targets, the breakup cross sections are enhanced at energies below the Coulomb barrier (E cm/V B ≤ 0.8) owing to these couplings. For the lighter target, relatively small enhancement of the breakup cross sections appear at energies well below the barrier (E cm/V B ≤ 0.6). At energies E cm/V B > 0.8 for medium and heavy targets, and E cm/V B > 0.6 for the light target, the continuum-continuum couplings substantially suppress the breakup cross sections. On the other hand, the fusion cross sections are enhanced at energies E cm/V B < 1.4, E cm/V B < 1.2 and E cm/V B < 0.8 for the light, medium and heavy target, respectively. The enhancement decreases as the target mass increases. Above the indicated respective energies, these couplings suppress the fusion cross sections. We also compared the breakup and fusion cross sections, and found that below the barrier, the breakup cross sections are more dominant regardless of whether continuum-continuum couplings are included.

Researcher / Researched: Repositioning Research Paradigms

ERIC Educational Resources Information Center

Meerwald, Agnes May Lin

2013-01-01

"Researcher / Researched" calls for a complementary research methodology by proposing autoethnography as both a method and text that crosses the boundaries of conventional and alternative methodologies in higher education. Autoethnography rearticulates the researcher / researched positions by blurring the boundary between them. This…

The effects of paradigmatic orientations of education research and discourse

NASA Astrophysics Data System (ADS)

Smithson, John Lawrence

This essay presents an examination of contemporary disputes over methodological and epistemological foundations underlying inquiry within the field of education research; investigating the obstacles to communication and understanding found in scholarly exchanges occurring across competing paradigmatic orientations. Terminological challenges to cross-paradigmatic communication are examined, identifying three specific terminological difficulties, referred to as homonym, contextual, and onti-stemic problems. Nicholas Burbules' model of dialogue, based upon characteristics of convergence, divergence, inclusive and critical traits, is adopted and applied to a sample of cross-paradigmatic exchanges found in recent educational research journals. Examination of those exchanges reveals certain strategies associated with cross-paradigmatic communication. These strategies, labeled as trivialization, caricaturization, and re-direction, are shown to be detrimental to the mutual understanding of the interlocutors. The model is then extended to address examples of paradigmatic orientations within methodological and epistemological contexts in order to consider the relationship between the various orientations represented in the literature of interest. Methodological and epistemological orientations are shown to be loosely coupled, with unexpected shifts in paradigmatic values found among researchers' methodological and epistemological commitments. Finally, the nature of the relationship between competing paradigmatic orientations is examined, with particular attention given to four types of incommensurability (ontological, linguistic, epistemological, and values incommensurability). I conclude that, though difficult, cross-paradigmatic communication is necessary in order to provide a multi-paradigmatic perspective that takes us beyond the fractured picture of educational phenomena available from current research approaches.

Simple, empirical approach to predict neutron capture cross sections from nuclear masses

NASA Astrophysics Data System (ADS)

Couture, A.; Casten, R. F.; Cakirli, R. B.

2017-12-01

Background: Neutron capture cross sections are essential to understanding the astrophysical s and r processes, the modeling of nuclear reactor design and performance, and for a wide variety of nuclear forensics applications. Often, cross sections are needed for nuclei where experimental measurements are difficult. Enormous effort, over many decades, has gone into attempting to develop sophisticated statistical reaction models to predict these cross sections. Such work has met with some success but is often unable to reproduce measured cross sections to better than 40 % , and has limited predictive power, with predictions from different models rapidly differing by an order of magnitude a few nucleons from the last measurement. Purpose: To develop a new approach to predicting neutron capture cross sections over broad ranges of nuclei that accounts for their values where known and which has reliable predictive power with small uncertainties for many nuclei where they are unknown. Methods: Experimental neutron capture cross sections were compared to empirical mass observables in regions of similar structure. Results: We present an extremely simple method, based solely on empirical mass observables, that correlates neutron capture cross sections in the critical energy range from a few keV to a couple hundred keV. We show that regional cross sections are compactly correlated in medium and heavy mass nuclei with the two-neutron separation energy. These correlations are easily amenable to predict unknown cross sections, often converting the usual extrapolations to more reliable interpolations. It almost always reproduces existing data to within 25 % and estimated uncertainties are below about 40 % up to 10 nucleons beyond known data. Conclusions: Neutron capture cross sections display a surprisingly strong connection to the two-neutron separation energy, a nuclear structure property. The simple, empirical correlations uncovered provide model-independent predictions of neutron capture cross sections, extending far from stability, including for nuclei of the highest sensitivity to r -process nucleosynthesis.

Kinematic Modeling of Central Nepal: Thermochronometer Cooling Ages as a Constraint for Balanced Cross Sections

NASA Astrophysics Data System (ADS)

Olree, E.; Robinson, D. M.; McQuarrie, N.; Ghoshal, S.; Olsen, J.

2016-12-01

Using balanced cross sections, one can visualize a valid and admissible interpretation of the surface and subsurface data. Khanal (2014) and Cross (2014) produced two valid and admissible cross sections along the Marsyandi River in central Nepal. However, thermochronologic data adds another dimension that must be adhered to when producing valid and admissible balanced cross sections. Since the previous cross sections were produced, additional zircon-helium (ZHe) cooling ages along the Marsyandi River show ages of 1 Ma near the Main Central thrust in the hinterland to 4 Ma near the Main Boundary thrust closer to the foreland. This distribution of cooling ages requires recent uplift in the hinterland, which is not present in the cross sections. Although a restored version of the Khanal (2014) cross section is sequentially deformed using 2D Move, the kinematic sequence implied in the cross section is inconsistent with the ZHe age distribution. The hinterland dipping duplex proposed by Khanal would require cooling ages that are oldest near the Main Central thrust and young southwards toward the active ramp located 80 km north of the Main Frontal thrust. Instead, the 4 Ma age near the Main Boundary thrust and the increasingly younger ages to the north could be produced by either a foreland-dipping Lesser Himalayan duplex, which would keep active uplift in the north, or by translation of the hinterland dipping duplex southward over the ramp, moving the active thrust ramp northward. To address this problem, a new balanced cross section was produced using both new mapping through the region and the ZHe age distribution as additional constraints. The section was then restored and sequentially deformed in 2D Move. This study illustrates that multiple cross sections can be viable and admissible; however, they can still be incorrect. Thermochronology places additional constraints on the permissible geometries, and thus increases our ability to predict subsurface geometries. The next step of this project is to link the uplift and erosion implied by the kinematic sequence of the new cross section to the measured cooling history by importing the cross section kinematics into advection diffusion modeling software that predicts cooling ages.

The maternal health outcomes of paid maternity leave: a systematic review.

PubMed

Aitken, Zoe; Garrett, Cameryn C; Hewitt, Belinda; Keogh, Louise; Hocking, Jane S; Kavanagh, Anne M

2015-04-01

Paid maternity leave has become a standard benefit in many countries throughout the world. Although maternal health has been central to the rationale for paid maternity leave, no review has specifically examined the effect of paid maternity leave on maternal health. The aim of this paper is to provide a systematic review of studies that examine the association between paid maternity leave and maternal health. We conducted a comprehensive search of electronic databases (Medline, Embase, CINAHL, PsycINFO, Web of Science, Sociological Abstracts) and Google Scholar. We searched websites of relevant organisations, reference lists of key papers and journals, and citation indices for additional studies including those not in refereed journals. There were no language restrictions. Studies were included if they compared paid maternity leave versus no paid maternity leave, or different lengths of paid leave. Data were extracted and an assessment of bias was performed independently by authors. Seven studies were identified, with participants from Australia, Sweden, Norway, USA, Canada, and Lebanon. All studies used quantitative methodologies, including cohort, cross-sectional, and repeated cross-sectional designs. Outcomes included mental health and wellbeing, general health, physical wellbeing, and intimate partner violence. The four studies that examined leave at an individual level showed evidence of maternal health benefits, whereas the three studies conducting policy-level comparisons reported either no association or evidence of a negative association. The synthesis of the results suggested that paid maternity leave provided maternal health benefits, although this varied depending on the length of leave. This has important implications for public health and social policy. However, all studies were subject to confounding bias and many to reverse causation. Given the small number of studies and the methodological limitations of the evidence, longitudinal studies are needed to further clarify the effects of paid maternity leave on the health of mothers in paid employment. Copyright © 2015 Elsevier Ltd. All rights reserved.

High Burden of Impetigo and Scabies in a Tropical Country

PubMed Central

Steer, Andrew C.; Jenney, Adam W. J.; Kado, Joseph; Batzloff, Michael R.; La Vincente, Sophie; Waqatakirewa, Lepani; Mulholland, E. Kim; Carapetis, Jonathan R.

2009-01-01

Background Impetigo and scabies are endemic diseases in many tropical countries; however the epidemiology of these diseases is poorly understood in many areas, particularly in the Pacific. Methodology/Principal Findings We conducted three epidemiological studies in 2006 and 2007 to determine the burden of disease due to impetigo and scabies in children in Fiji using simple and easily reproducible methodology. Two studies were performed in primary school children (one study was a cross-sectional study and the other a prospective cohort study over ten months) and one study was performed in infants (cross-sectional). The prevalence of active impetigo was 25.6% (95% CI 24.1–27.1) in primary school children and 12.2% (95% CI 9.3–15.6) in infants. The prevalence of scabies was 18.5% (95% CI 17.2–19.8) in primary school children and 14.0% (95% CI 10.8–17.2) in infants. The incidence density of active impetigo, group A streptococcal (GAS) impetigo, Staphylococcus aureus impetigo and scabies was 122, 80, 64 and 51 cases per 100 child-years respectively. Impetigo was strongly associated with scabies infestation (odds ratio, OR, 2.4, 95% CI 1.6–3.7) and was more common in Indigenous Fijian children when compared with children of other ethnicities (OR 3.6, 95% CI 2.7–4.7). The majority of cases of active impetigo in the children in our study were caused by GAS. S. aureus was also a common cause (57.4% in school aged children and 69% in infants). Conclusions/Significance These data suggest that the impetigo and scabies disease burden in children in Fiji has been underestimated, and possibly other tropical developing countries in the Pacific. These diseases are more than benign nuisance diseases and consideration needs to be given to expanded public health initiatives to improve their control. PMID:19547749

Relationship between altitude and the prevalence of hypertension in Tibet: a systematic review

PubMed Central

Mingji, Cuomu; Onakpoya, Igho J; Perera, Rafael; Ward, Alison M; Heneghan, Carl J

2015-01-01

Introduction Hypertension is a leading cause of cardiovascular disease, which is the cause of one-third of global deaths and is a primary and rising contributor to the global disease burden. The objective of this systematic review was to determine the prevalence and awareness of hypertension among the inhabitants of Tibet and its association with altitude, using the data from published observational studies. Methods We conducted electronic searches in Medline, Embase, ISI Web of Science and Global Health. No gender or language restrictions were imposed. We assessed the methodological characteristics of included studies using the Strengthening the Reporting of Observational Studies in Epidemiology (STROBE) criteria. Two reviewers independently determined the eligibility of studies, assessed the methodology of included studies and extracted the data. We used meta-regression to estimate the degree of change in hypertension prevalence with increasing altitude. Results We identified 22 eligible articles of which eight cross-sectional studies with a total of 16 913 participants were included. The prevalence of hypertension ranged between 23% and 56%. A scatter plot of altitude against overall prevalence revealed a statistically significant correlation (r=0.68; p=0.04). Meta-regression analysis revealed a 2% increase in the prevalence of hypertension with every 100 m increase in altitude (p=0.06). The locations and socioeconomic status of subjects affected the awareness and subsequent treatment and control of hypertension. Conclusions The results from cross-sectional studies suggest that there is a significant correlation between altitude and the prevalence of hypertension among inhabitants of Tibet. The socioeconomic status of the inhabitants can influence awareness and management of hypertension. Very little research into hypertension has been conducted in other prefectures of Tibet where the altitude is much higher. Further research examining the impact of altitude on blood pressure is warranted. PMID:25953970

Prevalence of musculoskeletal diseases in a semi-urban Nigerian community: results of a cross-sectional survey using COPCORD methodology.

PubMed

Courage, Uhunmwangho U; Stephen, Dungwom P; Lucius, Imoh C; Ani, Charles; Oche, Agbaji O; Emmanuel, Agaba I; Olufemi, Adelowo O

2017-11-01

The International League of Associations for Rheumatology (ILAR) in collaboration with the World Health Organization (WHO) initiated the Community Oriented Program for the Control of Rheumatic diseases (COPCORD) to promote the growth of rheumatology in developing countries. This is the first COPCORD-type survey carried out in a West African community. The objective of this study was to determine the prevalence of musculoskeletal diseases in a semi-urban Nigerian community, using the COPCORD methodology. This is a cross-sectional total population survey, carried out in Katon Rikkos, Jos, Nigeria, from June 2015 to November 2016. All inhabitants of the community who are 15 years and older were included in the study, except those who were not available or refused to participate. Trained health workers from the community carried out a house-to-house survey, to administer the COPCORD questionnaire. People reporting musculoskeletal symptoms were examined and investigated at the teaching hospital, to determine the specific type of musculoskeletal diseases. Data was analyzed using Epi-info version 7.1.5 and P values of <0.05 were considered statistically significant. The median age of the study population was 33 (IQR 24-46) years, with a male to female ratio of 1:1.1. The prevalence of musculoskeletal disease was 33%. Females (57.0%) were more affected than males (43.0%); the most common form of musculoskeletal diseases diagnosed was osteoarthritis (22.0%). Male sex and a family history of musculoskeletal diseases were independent predictors of musculoskeletal diseases. A Health Assessment Questionnaire Disability Index (HAQ-DI) ≥1 was recorded in 14% of subjects with musculoskeletal diseases. The prevalence of musculoskeletal diseases in this community is high with significant disability; therefore, there is urgent need for increased access to rheumatology care in the community.

What do letters to the editor publish about randomized controlled trials? A cross-sectional study

PubMed Central

2013-01-01

Background To identify published letters to the editor (LTE) written in response to randomized controlled trials (RCTs), determine the topics addressed in the letters, and to examine if these topics were affected by the characteristics and results of the RCTs. Methods Comparative cross-sectional study of a representative sample of RCTs from a set of high-impact medical journals (BMJ, Lancet, NEJM, JAMA, and Annals of Internal Medicine). RCTs and their published LTE were searched from these 5 journals in 2007. Data were collected on RCTs and their characteristics (author affiliation, funding source, intervention, and effect on the primary outcome) and the topics addressed in published LTE related to these RCTs. Analysis included chi-square and regression analysis (RCT characteristics) and thematic analysis (LTE topics). Results Of 334 identified RCTs, 175 trials had at least one LTE. Of these, 381 published LTE were identified. Most RCTs, tested drug interventions (68%), were funded by government (54%) or industry (33%), and described an intervention that had a positive impact on the primary outcome (62%). RCT authors were primarily affiliated with an academic centre (78%). Ninety percent of the 623 LTE topics concerned methodological issues regarding the analysis, intervention, and population in the RCT. There was a significant association between funding source and impact on outcomes (p = 0.002) or type of intervention tested (p = 0.001) in these trials. Clinical and “Other” LTE topics were more likely to be published in response to a government funded RCT (p = 0.005 and p = 0.033, respectively); no other comparisons were significant. Conclusions This study showed that most LTE are about methodological topics, but found little evidence to support that these topics are affected by the characteristics or results of the RCTs. The lack of association may be explained by editorial censorship as a small proportion of LTE that are submitted are actually published. PMID:24124753

What do letters to the editor publish about randomized controlled trials? A cross-sectional study.

PubMed

Kastner, Monika; Menon, Anita; Straus, Sharon E; Laupacis, Andreas

2013-10-14

To identify published letters to the editor (LTE) written in response to randomized controlled trials (RCTs), determine the topics addressed in the letters, and to examine if these topics were affected by the characteristics and results of the RCTs. Comparative cross-sectional study of a representative sample of RCTs from a set of high-impact medical journals (BMJ, Lancet, NEJM, JAMA, and Annals of Internal Medicine). RCTs and their published LTE were searched from these 5 journals in 2007. Data were collected on RCTs and their characteristics (author affiliation, funding source, intervention, and effect on the primary outcome) and the topics addressed in published LTE related to these RCTs. Analysis included chi-square and regression analysis (RCT characteristics) and thematic analysis (LTE topics). Of 334 identified RCTs, 175 trials had at least one LTE. Of these, 381 published LTE were identified. Most RCTs, tested drug interventions (68%), were funded by government (54%) or industry (33%), and described an intervention that had a positive impact on the primary outcome (62%). RCT authors were primarily affiliated with an academic centre (78%). Ninety percent of the 623 LTE topics concerned methodological issues regarding the analysis, intervention, and population in the RCT. There was a significant association between funding source and impact on outcomes (p = 0.002) or type of intervention tested (p = 0.001) in these trials. Clinical and "Other" LTE topics were more likely to be published in response to a government funded RCT (p = 0.005 and p = 0.033, respectively); no other comparisons were significant. This study showed that most LTE are about methodological topics, but found little evidence to support that these topics are affected by the characteristics or results of the RCTs. The lack of association may be explained by editorial censorship as a small proportion of LTE that are submitted are actually published.

Trends in nursing research in France: a cross-sectional analysis.

PubMed

Dupin, C M; Chami, K; Petit dit Dariel, O; Debout, C; Rothan-Tondeur, M

2013-06-01

To examine the engagement of French registered nurses with the Ministry of Health's initiative to spur scientific inquiry in the community. French nursing research has suffered from a lack of dedicated funding. Positive signs of change have recently appeared, with the launch of the first national public funding programme dedicated to nursing research. This initiative, begun in 2010, was launched by the French Ministry of Health. Through this initiative, 149 registered nurses, serving as principal investigators, and their teams submitted research proposals between 2010 and 2011. The administrative guidelines of the funding programme are clearly oriented towards producing quantitative and exogenous nursing research. A cross-sectional analysis of 149 nursing research projects submitted during the first and second years of a French national funding programme for hospital-based nursing research was conducted. Research proposals were included in the analysis whether they received funding or not. Data collection took place in 2011. The categories used in the analysis were the following: (1) the socio-demographic data on the registered nurse principal investigators, (2) the research teams and (3) the research proposals (methodologies, bibliography, focus of the research, output, the status of the research proposals). This study highlights the presence of methodological homogeneity among the research proposals submitted for funding. Clear tendencies were towards interventional and quantitative studies and those with an exogenous factor research objective. Between 2010 and 2011, 25 projects were funded out of 149 submitted. They were mostly quantitative and/or focused on the exogenous factors in patient care. The socio-political context of a funding programme designed to encourage nursing research has had an implicit influence on the type of research to which French nurses have committed themselves to and the scientific positions with which these nurse researchers align themselves. © 2013 The Authors. International Nursing Review © 2013 International Council of Nurses.

CARRS Surveillance study: design and methods to assess burdens from multiple perspectives

PubMed Central

2012-01-01

Background Cardio-metabolic diseases (CMDs) are a growing public health problem, but data on incidence, trends, and costs in developing countries is scarce. Comprehensive and standardised surveillance for non-communicable diseases was recommended at the United Nations High-level meeting in 2011. Aims: To develop a model surveillance system for CMDs and risk factors that could be adopted for continued assessment of burdens from multiple perspectives in South-Asian countries. Methods Design: Hybrid model with two cross-sectional serial surveys three years apart to monitor trend, with a three-year prospective follow-up of the first cohort. Sites: Three urban settings (Chennai and New Delhi in India; Karachi in Pakistan), 4000 participants in each site stratified by gender and age. Sampling methodology: Multi-stage cluster random sampling; followed by within-household participant selection through a combination of Health Information National Trends Study (HINTS) and Kish methods. Culturally-appropriate and methodologically-relevant data collection instruments were developed to gather information on CMDs and their risk factors; quality of life, health-care utilisation and costs, along with objective measures of anthropometric, clinical and biochemical parameters. The cohort follow-up is designed as a pilot study to understand the feasibility of estimating incidence of risk factors, disease events, morbidity, and mortality. Results The overall participant response rate in the first cross-sectional survey was 94.1% (Chennai 92.4%, n = 4943; Delhi 95.7%, n = 4425; Karachi 94.3%, n = 4016). 51.8% of the participants were females, 61.6% < 45years, 27.5% 45–60years and 10.9% >60 years. Discussion This surveillance model will generate data on prevalence and trends; help study the complex life-course patterns of CMDs, and provide a platform for developing and testing interventions and tools for prevention and control of CMDs in South-Asia. It will also help understanding the challenges and opportunities in establishing a surveillance system across countries. PMID:22928740

Associations between maternal depressive symptoms and child feeding practices in a cross-sectional study of low-income mothers and their young children

PubMed Central

2014-01-01

Background Maternal depression may influence feeding practices important in determining child eating behaviors and weight. However, the association between maternal depressive symptoms and feeding practices has been inconsistent, and most prior studies used self-report questionnaires alone to characterize feeding. The purpose of this study was to identify feeding practices associated with maternal depressive symptoms using multiple methodologies, and to test the hypothesis that maternal depressive symptoms are associated with less responsive feeding practices. Methods In this cross-sectional, observational study, participants (n = 295) included low-income mothers and their 4- to 8-year-old children. Maternal feeding practices were assessed via interviewer-administered questionnaires, semi-structured narrative interviews, and videotaped observations in home and laboratory settings. Maternal depressive symptoms were measured using the Center for Epidemiologic Studies-Depression scale (CES-D). Regression analyses examined associations between elevated depressive symptoms (CES-D score ≥16) and measures of maternal feeding practices, adjusting for: child sex, food fussiness, number of older siblings; and maternal age, body mass index (BMI), education, race/ethnicity, single parent status, perceived child weight, and concern about child weight. Results Thirty-one percent of mothers reported depressive symptoms above the screening cutoff. Mothers with elevated depressive symptoms reported more pressuring of children to eat (β = 0.29; 95% Confidence Interval (CI): 0.03, 0.54) and more overall demandingness (β = 0.16; 95% CI: 0.03, 0.29), and expressed lower authority in child feeding during semi-structured narrative interview (Odds Ratio (OR) for low authority: 2.82; 95% CI: 1.55, 5.12). In homes of mothers with elevated depressive symptoms, the television was more likely audible during meals (OR: 1.91; 95% CI: 1.05, 3.48) and mothers were less likely to eat with children (OR: 0.48; 95% CI: 0.27, 0.85). There were no associations between maternal depressive symptoms and encouragement or discouragement of food in laboratory eating interactions. Conclusions Mothers with elevated depressive symptoms demonstrated less responsive feeding practices than mothers with lower levels of depressive symptoms. These results suggest that screening for maternal depressive symptoms may be useful when counseling on healthy child feeding practices. Given inconsistencies across methodologies, future research should include multiple methods of characterizing feeding practices and direct comparisons of different methodologies. PMID:24935753

Associations between maternal depressive symptoms and child feeding practices in a cross-sectional study of low-income mothers and their young children.

PubMed

Goulding, Alison N; Rosenblum, Katherine L; Miller, Alison L; Peterson, Karen E; Chen, Yu-Pu; Kaciroti, Niko; Lumeng, Julie C

2014-06-16

Maternal depression may influence feeding practices important in determining child eating behaviors and weight. However, the association between maternal depressive symptoms and feeding practices has been inconsistent, and most prior studies used self-report questionnaires alone to characterize feeding. The purpose of this study was to identify feeding practices associated with maternal depressive symptoms using multiple methodologies, and to test the hypothesis that maternal depressive symptoms are associated with less responsive feeding practices. In this cross-sectional, observational study, participants (n = 295) included low-income mothers and their 4- to 8-year-old children. Maternal feeding practices were assessed via interviewer-administered questionnaires, semi-structured narrative interviews, and videotaped observations in home and laboratory settings. Maternal depressive symptoms were measured using the Center for Epidemiologic Studies-Depression scale (CES-D). Regression analyses examined associations between elevated depressive symptoms (CES-D score ≥16) and measures of maternal feeding practices, adjusting for: child sex, food fussiness, number of older siblings; and maternal age, body mass index (BMI), education, race/ethnicity, single parent status, perceived child weight, and concern about child weight. Thirty-one percent of mothers reported depressive symptoms above the screening cutoff. Mothers with elevated depressive symptoms reported more pressuring of children to eat (β = 0.29; 95% Confidence Interval (CI): 0.03, 0.54) and more overall demandingness (β = 0.16; 95% CI: 0.03, 0.29), and expressed lower authority in child feeding during semi-structured narrative interview (Odds Ratio (OR) for low authority: 2.82; 95% CI: 1.55, 5.12). In homes of mothers with elevated depressive symptoms, the television was more likely audible during meals (OR: 1.91; 95% CI: 1.05, 3.48) and mothers were less likely to eat with children (OR: 0.48; 95% CI: 0.27, 0.85). There were no associations between maternal depressive symptoms and encouragement or discouragement of food in laboratory eating interactions. Mothers with elevated depressive symptoms demonstrated less responsive feeding practices than mothers with lower levels of depressive symptoms. These results suggest that screening for maternal depressive symptoms may be useful when counseling on healthy child feeding practices. Given inconsistencies across methodologies, future research should include multiple methods of characterizing feeding practices and direct comparisons of different methodologies.

Going Public with Pedagogical Inquiries: SoTL as a Methodology for Faculty Professional Development

ERIC Educational Resources Information Center

Fanghanel, Joëlle

2013-01-01

In this paper, I discuss SoTL as a methodology for the professional development of academics. I propose that as an agentic form of inquiry that focuses on processes, boundary-crossing, and making public its findings, SoTL is a sophisticated methodology that brings the activities of teaching and research in close alignment, and contributes to…

Advancing scoping study methodology: a web-based survey and consultation of perceptions on terminology, definition and methodological steps.

PubMed

O'Brien, Kelly K; Colquhoun, Heather; Levac, Danielle; Baxter, Larry; Tricco, Andrea C; Straus, Sharon; Wickerson, Lisa; Nayar, Ayesha; Moher, David; O'Malley, Lisa

2016-07-26

Scoping studies (or reviews) are a method used to comprehensively map evidence across a range of study designs in an area, with the aim of informing future research practice, programs and policy. However, no universal agreement exists on terminology, definition or methodological steps. Our aim was to understand the experiences of, and considerations for conducting scoping studies from the perspective of academic and community partners. Primary objectives were to 1) describe experiences conducting scoping studies including strengths and challenges; and 2) describe perspectives on terminology, definition, and methodological steps. We conducted a cross-sectional web-based survey with clinicians, educators, researchers, knowledge users, representatives from community-based organizations, graduate students, and policy stakeholders with experience and/or interest in conducting scoping studies to gain an understanding of experiences and perspectives on the conduct and reporting of scoping studies. We administered an electronic self-reported questionnaire comprised of 22 items related to experiences with scoping studies, strengths and challenges, opinions on terminology, and methodological steps. We analyzed questionnaire data using descriptive statistics and content analytical techniques. Survey results were discussed during a multi-stakeholder consultation to identify key considerations in the conduct and reporting of scoping studies. Of the 83 invitations, 54 individuals (65 %) completed the scoping questionnaire, and 48 (58 %) attended the scoping study meeting from Canada, the United Kingdom and United States. Many scoping study strengths were dually identified as challenges including breadth of scope, and iterative process. No consensus on terminology emerged, however key defining features that comprised a working definition of scoping studies included the exploratory mapping of literature in a field; iterative process, inclusion of grey literature; no quality assessment of included studies, and an optional consultation phase. We offer considerations for the conduct and reporting of scoping studies for researchers, clinicians and knowledge users engaging in this methodology. Lack of consensus on scoping terminology, definition and methodological steps persists. Reasons for this may be attributed to diversity of disciplines adopting this methodology for differing purposes. Further work is needed to establish guidelines on the reporting and methodological quality assessment of scoping studies.

Fragmentation of Ar-40 at 100 GeV/c

NASA Technical Reports Server (NTRS)

Lindstrom, P. J.; Greiner, D. E.; Heckman, H. H.; Cork, B.; Bieser, F. S.

1975-01-01

The delta Z is greater than or equal to 1 reaction cross section for 1.8 GeV/n Ar-40 have been measured on targets ranging from H to Pb. Comparing these cross sections with H-1, C-12, and O-16 reaction cross sections at relativistic energies yields a formula for nucleus-nucleus reaction cross sections.

Temperature-dependent absorption cross sections for hydrogen peroxide vapor

NASA Technical Reports Server (NTRS)

Nicovich, J. M.; Wine, P. H.

1988-01-01

Relative absorption cross sections for hydrogen peroxide vapor were measured over the temperature ranges 285-381 K for lambda = 230 nm-295 nm and 300-381 K for lambda = 193 nm-350 nm. The well established 298 K cross sections at 202.6 and 228.8 nm were used as an absolute calibration. A significant temperature dependence was observed at the important tropospheric photolysis wavelengths lambda over 300 nm. Measured cross sections were extrapolated to lower temperatures, using a simple model which attributes the observed temperature dependence to enhanced absorption by molecules possessing one quantum of O-O stretch vibrational excitation. Upper tropospheric photodissociation rates calculated using the extrapolated cross sections are about 25 percent lower than those calculated using currently recommended 298 K cross sections.

Measurements of absolute absorption cross sections of ozone in the 185- to 254-nm wavelength region and the temperature dependence

NASA Technical Reports Server (NTRS)

Yoshino, K.; Esmond, J. R.; Freeman, D. E.; Parkinson, W. H.

1993-01-01

Laboratory measurements of the relative absorption cross sections of ozone at temperatures 195, 228, and 295 K have been made throughout the 185 to 254 nm wavelength region. The absolute absorption cross sections at the same temperatures have been measured at several discrete wavelengths in the 185 to 250 nm region. The absolute cross sections of ozone have been used to put the relative cross sections on a firm absolute basis throughout the 185 to 255 nm region. These recalibrated cross sections are slightly lower than those of Molina and Molina (1986), but the differences are within a few percent and would not be significant in atmospheric applications.

Fragmentation cross sections of O-16 between 0.9 and 200 GeV/nucleon

NASA Technical Reports Server (NTRS)

Hirzebruch, S. E.; Heinrich, W.; Tolstov, K. D.; Kovalenko, A. D.; Benton, E. V.

1995-01-01

Inclusive cross sections for high energy interactions at 0.9, 2.3, 3.6, and 13.5 GeV/nucleon of O-16 with C, CR-39 (C12H18O7), CH2, Al, Cu, Ag, and Pb targets were measured. The total charge-changing cross sections and partial charge-changing cross sections for the production of fragments with charge Z = 6 and Z = 7 are compared to previous experiments at 60 and 200 GeV/nucleon. The contributions of Coulomb dissociation to the total cross sections are calculated. Using factorization rules the partial electromagnetic cross sections are separated from the nuclear components. Energy dependence of both components are investigated and discussed.

Nuclear annihilation by antinucleons

DOE PAGES

Lee, Teck-Ghee; Wong, Cheuk-Yin

2016-01-25

We examine the momentum dependence ofmore » $$\\bar{p}$$p and $$\\bar{n}$$p annihilation cross sections by considering the transmission through a nuclear potential and the $$\\bar {p}$$p Coulomb interaction. Compared to the $$\\bar{n}$$p annihilation cross section, the $$\\bar{p}$$p annihilation cross section is significantly enhanced by the Coulomb interaction for projectile momenta below p lab < 500 MeV/c, and the two annihilation cross sections approach the Pomeranchuk's equality limit [JETP 30, 423 (1956)] at p lab ~500 MeV/c. Using these elementary cross sections as the basic input data, the extended Glauber model is employed to evaluate the annihilation cross sections for $$\\bar{n}$$ and $$\\bar{p}$$ interaction with nuclei and the results compare well with experimental data.« less

Using 171,173Yb(d,p) to benchmark a surrogate reaction for neutron capture

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hatarik, R; Bersntein, L; Burke, J

2008-08-08

Neutron capture cross sections on unstable nuclei are important for many applications in nuclear structure and astrophysics. Measuring these cross sections directly is a major challenge and often impossible. An indirect approach for measuring these cross sections is the surrogate reaction method, which makes it possible to relate the desired cross section to a cross section of an alternate reaction that proceeds through the same compound nucleus. To benchmark the validity of using the (d,p{gamma}) reaction as a surrogate for (n,{gamma}), the {sup 171,173}Yb(d,p{gamma}) reactions were measured with the goal to reproduce the known [1] neutron capture cross section ratiosmore » of these nuclei.« less

Photoeffect cross sections of several rare-earth elements for 323-keV photons

NASA Astrophysics Data System (ADS)

Umesh, T. K.; Anasuya, S. J.; Shylaja Kumari, J.; Gowda, Channe; Gopinathan Nair, K. P.; Gowda, Ramakrishna

1992-02-01

Total-attenuation cross sections of the oxides of rare-earth elements such as La, Ce, Pr, Nd, Sm, Gd, Dy, Ho, and Er, and also NaNO3 and NaNO2 have been measured in a narrow-beam geometry setup at 323 keV. The total-attenuation cross section for oxygen was obtained as the difference in NaNO3 and NaNO2 cross sections. Using this, the total-attenuation cross sections of the individual lanthanides have been obtained with the aid of the mixture rule. From these, the photoeffect cross sections were derived by subtracting the scattering contribution. These values are found to agree well with Scofield's theoretical data [University of California Report No. UCRL 51326, 1973 (unpublished)].

One-jet inclusive cross section at order a(s)-cubed - Gluons only

NASA Technical Reports Server (NTRS)

Ellis, Stephen D.; Kunszt, Zoltan; Soper, Davison E.

1989-01-01

A complete calculation of the hadron jet cross-section at one order beyond the Born approximation is performed for the simplified case in which there are only gluons. The general structure of the differences from the lowest-order cross-section are described. This step allows two important improvements in the understanding of the theoretical hadron jet cross-section: first, the cross section at this order displays explicit dependence on the jet cone size, so that explicit account can be taken of the differences in jet definitions employed by different experiments; second, the magnitude of the uncertainty of the theoretical cross-section due to the arbitrary choice of the factorization scale has been reduced by a factor of two to three.

Solid oxide fuel cell with transitioned cross-section for improved anode gas management at the open end

DOEpatents

Zafred, Paolo R [Murrysville, PA; Draper, Robert [Pittsburgh, PA

2012-01-17

A solid oxide fuel cell (400) is made having a tubular, elongated, hollow, active section (445) which has a cross-section containing an air electrode (452) a fuel electrode (454) and solid oxide electrolyte (456) between them, where the fuel cell transitions into at least one inactive section (460) with a flattened parallel sided cross-section (462, 468) each cross-section having channels (472, 474, 476) in them which smoothly communicate with each other at an interface section (458).

Nuclear reactor control column

DOEpatents

Bachovchin, Dennis M.

1982-01-01

The nuclear reactor control column comprises a column disposed within the nuclear reactor core having a variable cross-section hollow channel and containing balls whose vertical location is determined by the flow of the reactor coolant through the column. The control column is divided into three basic sections wherein each of the sections has a different cross-sectional area. The uppermost section of the control column has the greatest cross-sectional area, the intermediate section of the control column has the smallest cross-sectional area, and the lowermost section of the control column has the intermediate cross-sectional area. In this manner, the area of the uppermost section can be established such that when the reactor coolant is flowing under normal conditions therethrough, the absorber balls will be lifted and suspended in a fluidized bed manner in the upper section. However, when the reactor coolant flow falls below a predetermined value, the absorber balls will fall through the intermediate section and into the lowermost section, thereby reducing the reactivity of the reactor core and shutting down the reactor.

Theory and Method in Cross-Cultural Psychology

ERIC Educational Resources Information Center

Malpass, Roy S.

1977-01-01

Cross cultural psychology is considered as a methodological strategy, as a means of evaluating hypotheses of unicultural origins with evidence of more panhuman relevance, and as a means of developing new theoretical psychological phenomena. (Author)

Impact of public programs on fertility and gender specific investment in human capital of children in rural India: cross sectional and time series analyses.

PubMed

Duraisamy, P; Malathy, R

1991-01-01

Cross sectional and time series analyses are conducted with 1971 and 1981 rural district level data for India in order to estimate variations in program impacts on household decisionmaking concerning fertility, child mortality, and schooling; to analyze how the variation in public program subsidies and services influences sex specific investments in schooling; and to examine the bias in cross sectional estimates by employing fixed effects methodology. The theory of household production uses the framework development by Rosenzweig and Wolpin. The utility function is expressed as a function of families' desired number of children, sex specific investment in human capital of children measured by schooling of males and females, and a composite consumption good. Budget constraints are characterized in terms of the biological supply of births or natural fertility, the number of births averted by fertility control, exogenous money income, the prices of number of children, contraceptives, child schooling, and consumption of goods. Demand functions are constructed from maximizing the utility function subject to the budget constraint. Data constitute 40% of the total districts and 50% of the rural population. The empirical specification of the linear model and variable description are provided. Other explanatory variables included are adult educational attainment; % of scheduled castes and tribes and % Muslim; and % rural population. Estimation methods are described and justification is provided for the use of ordinary least squares and fixed effects methods. The results of the cross sectional analysis reveal that own-program effects of family planning and primary health centers reduced family size in 1971 and 81. The increase in secondary school enrollment is evidenced in only 1971. There is a significant effect of family planning (FP) clinics on the demand for surviving children only in 1971. The presence of a seconary school in a village reduces the demand for children in both years. Primary health centers (PHC) and hospitals in a village only encourage boys and girls schooling in 1981. Doubling the number of PHCs/1000 population would reduce the total fertility rate from 4.05 to 3.85. Doubling secondary schools alone would reduce the total fertility rate to 3.75. A 12% decline in fertility or a 20% decrease in populaiton growth would be realized with this doubling. Promotion of female higher education would reduce family size and increase the schooling of females, to equalize the enrollments between the sexes. Muslim population increases fertility and reduces schooling for both sexes. The panel results suggest that the effects of hospitals are overstated cross sectionally, and the effects of FP and secondary schools are understated. Both analyses showed increases in schools to improve female educational attainment.

Deterministic Modeling of the High Temperature Test Reactor

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ortensi, J.; Cogliati, J. J.; Pope, M. A.

2010-06-01

Idaho National Laboratory (INL) is tasked with the development of reactor physics analysis capability of the Next Generation Nuclear Power (NGNP) project. In order to examine INL’s current prismatic reactor deterministic analysis tools, the project is conducting a benchmark exercise based on modeling the High Temperature Test Reactor (HTTR). This exercise entails the development of a model for the initial criticality, a 19 column thin annular core, and the fully loaded core critical condition with 30 columns. Special emphasis is devoted to the annular core modeling, which shares more characteristics with the NGNP base design. The DRAGON code is usedmore » in this study because it offers significant ease and versatility in modeling prismatic designs. Despite some geometric limitations, the code performs quite well compared to other lattice physics codes. DRAGON can generate transport solutions via collision probability (CP), method of characteristics (MOC), and discrete ordinates (Sn). A fine group cross section library based on the SHEM 281 energy structure is used in the DRAGON calculations. HEXPEDITE is the hexagonal z full core solver used in this study and is based on the Green’s Function solution of the transverse integrated equations. In addition, two Monte Carlo (MC) based codes, MCNP5 and PSG2/SERPENT, provide benchmarking capability for the DRAGON and the nodal diffusion solver codes. The results from this study show a consistent bias of 2–3% for the core multiplication factor. This systematic error has also been observed in other HTTR benchmark efforts and is well documented in the literature. The ENDF/B VII graphite and U235 cross sections appear to be the main source of the error. The isothermal temperature coefficients calculated with the fully loaded core configuration agree well with other benchmark participants but are 40% higher than the experimental values. This discrepancy with the measurement stems from the fact that during the experiments the control rods were adjusted to maintain criticality, whereas in the model, the rod positions were fixed. In addition, this work includes a brief study of a cross section generation approach that seeks to decouple the domain in order to account for neighbor effects. This spectral interpenetration is a dominant effect in annular HTR physics. This analysis methodology should be further explored in order to reduce the error that is systematically propagated in the traditional generation of cross sections.« less

3D quantitative comparative analysis of long bone diaphysis variations in microanatomy and cross-sectional geometry.

PubMed

Houssaye, Alexandra; Taverne, Maxime; Cornette, Raphaël

2018-05-01

Long bone inner structure and cross-sectional geometry display a strong functional signal, leading to convergences, and are widely analyzed in comparative anatomy at small and large taxonomic scales. Long bone microanatomical studies have essentially been conducted on transverse sections but also on a few longitudinal ones. Recent studies highlighted the interest in analyzing variations of the inner structure along the diaphysis using a qualitative as well as a quantitative approach. With the development of microtomography, it has become possible to study three-dimensional (3D) bone microanatomy and, in more detail, the form-function relationships of these features. This study focused on the selection of quantitative parameters to describe in detail the cross-sectional shape changes and distribution of the osseous tissue along the diaphysis. Two-dimensional (2D) virtual transverse sections were also performed in the two usual reference planes and results were compared with those obtained based on the whole diaphysis analysis. The sample consisted in 14 humeri and 14 femora of various mammalian taxa that are essentially terrestrial. Comparative quantitative analyses between different datasets made it possible to highlight the parameters that are strongly impacted by size and phylogeny and the redundant ones, and thus to estimate their relevance for use in form-function analyses. The analysis illustrated that results based on 2D transverse sections are similar for both sectional planes; thus if a strong bias exists when mixing sections from the two reference planes in the same analysis, it would not problematic to use either one plane or the other in comparative studies. However, this may no longer hold for taxa showing a much stronger variation in bone microstructure along the diaphysis. Finally, the analysis demonstrated the significant contribution of the parameters describing variations along the diaphysis, and thus the interest in performing 3D analyses; this should be even more fruitful for heterogeneous diaphyses. In addition, covariation analyses showed that there is a strong interest in removing the size effect to access the differences in the microstructure of the humerus and femur. This methodological study provides a reference for future quantitative analyses on long bone inner structure and should make it possible, through a detailed knowledge of each descriptive parameter, to better interpret results from the multivariate analyses associated with these studies. This will have direct implications for studies in vertebrate anatomy, but also in paleontology and anthropology. © 2018 Anatomical Society.

Fragmentation cross sections of medium-energy {sup 35}Cl, {sup 40}Ar, and {sup 48}Ti beams on elemental targets

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zeitlin, C.; Guetersloh, S.; Heilbronn, L.

Charge-changing and fragment production cross sections at 0 deg. have been obtained for interactions of 290, 400, and 650 MeV/nucleon {sup 40}Ar beams, 650 and 1000 MeV/nucleon {sup 35}Cl beams, and a 1000 MeV/nucleon {sup 48}Ti beam. Targets of C, CH{sub 2}, Al, Cu, Sn, and Pb were used. Using standard analysis methods, we obtained fragment cross sections for charges as low as 8 for Cl and Ar beams and as low as 10 for the Ti beam. Using data obtained with small-acceptance detectors, we report fragment production cross sections for charges as low as 5, corrected for acceptance usingmore » a simple model of fragment angular distributions. With the lower-charged fragment cross sections, we can compare the data to predictions from several models (including NUCFRG2, EPAX2, and PHITS) in a region largely unexplored in earlier work. As found in earlier work with other beams, NUCFRG2 and PHITS predictions agree reasonably well with the data for charge-changing cross sections, but these models do not accurately predict the fragment production cross sections. The cross sections for the lightest fragments demonstrate the inadequacy of several models in which the cross sections fall monotonically with the charge of the fragment. PHITS, despite its not agreeing particularly well with the fragment production cross sections on average, nonetheless qualitatively reproduces some significant features of the data that are missing from the other models.« less

Influence of strut cross-section of stents on local hemodynamics in stented arteries

NASA Astrophysics Data System (ADS)

Jiang, Yongfei; Zhang, Jun; Zhao, Wanhua

2016-05-01

Stenting is a very effective treatment for stenotic vascular diseases, but vascular geometries altered by stent implantation may lead to flow disturbances which play an important role in the initiation and progression of restenosis, especially in the near wall in stented arterial regions. So stent designs have become one of the indispensable factors needed to be considered for reducing the flow disturbances. In this paper, the structural designs of strut cross-section are considered as an aspect of stent designs to be studied in details. Six virtual stents with different strut cross-section are designed for deployments in the same ideal arterial model. Computational fluid dynamics (CFD) methods are performed to study how the shape and the aspect ratio (AR) of strut cross-section modified the local hemodynamics in the stented segments. The results indicate that stents with different strut cross-sections have different influence on the hemodynamics. Stents with streamlined cross-sectional struts for circular arc or elliptical arc can significantly enhance wall shear stress (WSS) in the stented segments, and reduce the flow disturbances around stent struts. The performances of stents with streamlined cross-sectional struts are better than that of stents with non-streamlined cross-sectional struts for rectangle. The results also show that stents with a larger AR cross-section are more conductive to improve the blood flow. The present study provides an understanding of the flow physics in the vicinity of stent struts and indicates that the shape and AR of strut cross-section ought to be considered as important factors to minimize flow disturbance in stent designs.

The Production of FRW Universe and Decay to Particles in Multiverse

NASA Astrophysics Data System (ADS)

Ghaffary, Tooraj

2017-09-01

In this study, first, it will be shown that as the Hubble parameter, " H", increases the production cross section for closed and flat Universes increases rapidly at smaller values of " H" and becomes constant for higher values of " H". However in the case of open Universe, the production cross section has been encountered a singularity. Before this singularity, as the H parameter increases, the cross section increases, for smaller H, ( H < 2.5), exhibits a turn-over at moderate values of H, (2.5 < H < 3.5), decreases for larger amount of H After that and for a special value of H, the cross section has been encountered with a singularity. Although the cross section cannot be defined at this singularity but before and after this point, it is certainly equal to zero. After this singularity, the cross section increases rapidly, when H increases. It is shown that if the production cross section of Universe happens before this singularity, it can't achieve to higher values of Hubble parameter after singularity. More over if the production cross section of Universe situates after the singularity, it won't get access to values of Hubble parameter less than the singularity. After that the thermal distribution for particles inside the FRW Universes are obtained. It is found that a large amount of particles are produced near apparent horizon due to their variety in their energy and their probabilities. Finally, comparing the particle production cross sections for flat, closed and open Universes, it is concluded that as the value of k increases, the cross section decreases.

Poster - 18: New features in EGSnrc for photon cross sections

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ali, Elsayed; Mainegra-Hing, Ernesto; Rogers, Davi

2016-08-15

Purpose: To implement two new features in the EGSnrc Monte Carlo system. The first is an option to account for photonuclear attenuation, which can contribute a few percent to the total cross section at the higher end of the energy range of interest to medical physics. The second is an option to use exact NIST XCOM photon cross sections. Methods: For the first feature, the photonuclear total cross sections are generated from the IAEA evaluated data. In the current, first-order implementation, after a photonuclear event, there is no energy deposition or secondary particle generation. The implementation is validated against deterministicmore » calculations and experimental measurements of transmission signals. For the second feature, before this work, if the user explicitly requested XCOM photon cross sections, EGSnrc still used its own internal incoherent scattering cross sections. These differ by up to 2% from XCOM data between 30 keV and 40 MeV. After this work, exact XCOM incoherent scattering cross sections are an available option. Minor interpolation artifacts in pair and triplet XCOM cross sections are also addressed. The default for photon cross section in EGSnrc is XCOM except for the new incoherent scattering cross sections, which have to be explicitly requested. The photonuclear, incoherent, pair and triplet data from this work are available for elements and compounds for photon energies from 1 keV to 100 GeV. Results: Both features are implemented and validated in EGSnrc.Conclusions: The two features are part of the standard EGSnrc distribution as of version 4.2.3.2.« less

Cross sections for H(-) and Cl(-) production from HCl by dissociative electron attachment

NASA Technical Reports Server (NTRS)

Orient, O. J.; Srivastava, S. K.

1985-01-01

A crossed target beam-electron beam collision geometry and a quadrupole mass spectrometer have been used to conduct dissociative electron attachment cross section measurements for the case of H(-) and Cl(-) production from HCl. The relative flow technique is used to determine the absolute values of cross sections. A tabulation is given of the attachment energies corresponding to various cross section maxima. Error sources contributing to total errors are also estimated.

Social capital: theory, evidence, and implications for oral health.

PubMed

Rouxel, Patrick L; Heilmann, Anja; Aida, Jun; Tsakos, Georgios; Watt, Richard G

2015-04-01

In the last two decades, there has been increasing application of the concept of social capital in various fields of public health, including oral health. However, social capital is a contested concept with debates on its definition, measurement, and application. This study provides an overview of the concept of social capital, highlights the various pathways linking social capital to health, and discusses the potential implication of this concept for health policy. An extensive and diverse international literature has examined the relationship between social capital and a range of general health outcomes across the life course. A more limited but expanding literature has also demonstrated the potential influence of social capital on oral health. Much of the evidence in relation to oral health is limited by methodological shortcomings mainly related to the measurement of social capital, cross-sectional study designs, and inadequate controls for confounding factors. Further research using stronger methodological designs should explore the role of social capital in oral health and assess its potential application in the development of oral health improvement interventions. © 2014 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Intellectual and academic outcomes after pediatric liver transplantation: Relationship with transplant-related factors.

PubMed

Afshar, Soheil; Porter, Melanie; Barton, Belinda; Stormon, Michael

2018-05-09

As survival rates for pediatric liver transplant continue to increase, research attention is turning toward long-term functional consequences, with particular interest in whether medical and transplant-related factors are implicated in neurocognitive outcomes. The relative importance of different factors is unclear, due to a lack of methodological uniformity, inclusion of differing primary diagnoses, varying transplant policies, and organ availability in different jurisdictions. This cross-sectional, single-site study sought to address various methodological limitations in the literature and the paucity of studies conducted outside of North America and Western Europe by examining the intellectual and academic outcomes of Australian pediatric liver transplant recipients (N = 40). Participants displayed significantly poorer intellectual and mathematical abilities compared with the normative population. Greater time on the transplant waitlist was a significant predictor of poorer verbal intelligence, working memory, mathematical abilities, and reading but only when considering the subgroup of children with biliary atresia. These findings support reducing the time children wait for a transplant as a priority. © 2018 The American Society of Transplantation and the American Society of Transplant Surgeons.

An Evolutionary Approach for Identifying Driver Mutations in Colorectal Cancer

PubMed Central

Leder, Kevin; Riester, Markus; Iwasa, Yoh; Lengauer, Christoph; Michor, Franziska

2015-01-01

The traditional view of cancer as a genetic disease that can successfully be treated with drugs targeting mutant onco-proteins has motivated whole-genome sequencing efforts in many human cancer types. However, only a subset of mutations found within the genomic landscape of cancer is likely to provide a fitness advantage to the cell. Distinguishing such “driver” mutations from innocuous “passenger” events is critical for prioritizing the validation of candidate mutations in disease-relevant models. We design a novel statistical index, called the Hitchhiking Index, which reflects the probability that any observed candidate gene is a passenger alteration, given the frequency of alterations in a cross-sectional cancer sample set, and apply it to a mutational data set in colorectal cancer. Our methodology is based upon a population dynamics model of mutation accumulation and selection in colorectal tissue prior to cancer initiation as well as during tumorigenesis. This methodology can be used to aid in the prioritization of candidate mutations for functional validation and contributes to the process of drug discovery. PMID:26379039

How different data sources and definitions of neighbourhood influence the association between food outlet availability and body mass index: a cross-sectional study.

PubMed

Hobbs, Matthew; Green, Mark; Griffiths, Claire; Jordan, Hannah; Saunders, Joanna; McKenna, Jim

2017-05-01

Inconsistencies in methodologies continue to inhibit understanding of the impact of the environment on body mass index (BMI). To estimate the effect of these differences, we assessed the impact of using different definitions of neighbourhood and data sets on associations between food outlet availability within the environment and BMI. Previous research has not extended this to show any differences in the strength of associations between food outlet availability and BMI across both different definitions of neighbourhood and data sets. Descriptive statistics showed differences in the number of food outlets, particularly other food retail outlets between different data sets and definitions of neighbourhood. Despite these differences, our key finding was that across both different definitions of neighbourhood and data sets, there was very little difference in size of associations between food outlets and BMI. Researchers should consider and transparently report the impact of methodological choices such as the definition of neighbourhood and acknowledge any differences in associations between the food environment and BMI.

Online professionalism: A synthetic review.

PubMed

Chretien, Katherine C; Tuck, Matthew G

2015-04-01

The rise of social media has increased connectivity and blurred personal and professional boundaries, bringing new challenges for medical professionalism. Whether traditional professionalism principles apply to the online social media space remains unknown. The purpose of this synthetic literature review was to characterize the original peer-reviewed research studies published between 1 January 2000-1 November 2014 on online professionalism, to assess methodologies and approaches used, and to provide insights to guide future studies in this area. The investigators searched three databases and performed manual searches of bibliographies to identify the 32 studies included. Most studies originated in the USA. Cross-sectional surveys and analyses of publicly available online content were the most common methodologies employed. Studies covered the general areas of use and privacy, assessment of unprofessional online behaviours, consensus-gathering of what constitutes unprofessional or inappropriate online behaviours, and education and policies. Studies were of variable quality; only around half of survey studies had response rates of 50% or greater. Medical trainees were the most common population studied. Future directions for research include public perspectives of online professionalism, impact on patient trust, and how to use social media productively as medical professionals.

Measurements of neutron capture cross sections on 70Zn at 0.96 and 1.69 MeV

NASA Astrophysics Data System (ADS)

Punte, L. R. M.; Lalremruata, B.; Otuka, N.; Suryanarayana, S. V.; Iwamoto, Y.; Pachuau, Rebecca; Satheesh, B.; Thanga, H. H.; Danu, L. S.; Desai, V. V.; Hlondo, L. R.; Kailas, S.; Ganesan, S.; Nayak, B. K.; Saxena, A.

2017-02-01

The cross sections of the 70Zn(n ,γ )Zn71m (T1 /2=3.96 ±0.05 -h ) reaction have been measured relative to the 197Au(n ,γ )198Au cross sections at 0.96 and 1.69 MeV using a 7Li(p ,n )7Be neutron source and activation technique. The cross section of this reaction has been measured for the first time in the MeV region. The new experimental cross sections have been compared with the theoretical prediction by talys-1.6 with various level-density models and γ -ray strength functions as well as the tendl-2015 library. The talys-1.6 calculation with the generalized superfluid level-density model and Kopecky-Uhl generalized Lorentzian γ -ray strength function predicted the new experimental cross sections at both incident energies. The 70Zn(n ,γ ) g+m 71Zn total capture cross sections have also been derived by applying the evaluated isomeric ratios in the tendl-2015 library to the measured partial capture cross sections. The spectrum averaged total capture cross sections derived in the present paper agree well with the jendl-4.0 library at 0.96 MeV, whereas it lies between the tendl-2015 and the jendl-4.0 libraries at 1.69 MeV.

Semi-empirical scaling for ion-atom single charge exchange cross sections in the intermediate velocity regime

NASA Astrophysics Data System (ADS)

Friedman, B.; DuCharme, G.

2017-06-01

We present a semi-empirical scaling law for non-resonant ion-atom single charge exchange cross sections for collisions with velocities from {10}7 {{t}}{{o}} {10}9 {cm} {{{s}}}-1 and ions with positive charge q< 8. Non-resonant cross sections tend to have a velocity peak at collision velocities v≲ 1 {{a}}{{u}} with exponential decay around this peak. We construct a scaling formula for the location of this peak then choose a functional form for the cross section curve and scale it. The velocity at which the cross section peaks, v m, is proportional to the energy defect of the collision, {{Δ }}E, which we predict with the decay approximation. The value of the cross section maximum is proportional to the charge state q, inversely proportional to the target ionization energy I T, and inversely proportional to v m. For the shape of the cross section curve, we use a function that decays exponentially asymptotically at high and low velocities. We scale this function with parameters {v}{{m}},{I}{{T}},{Z}{{T}},{and} {Z}{{P}}, where the {Z}{{T},{{P}}} are the target and projectile atomic numbers. For the more than 100 cross section curves that we use to find the scaling rules, the scaling law predicts cross sections within a little over a factor of 2 on average.

Sonographic evaluation of the greater occipital nerve in unilateral occipital neuralgia.

PubMed

Cho, John Chin-Suk; Haun, Daniel W; Kettner, Norman W

2012-01-01

Occipital neuralgia is a headache that may result from greater occipital nerve entrapment. Entrapped peripheral nerves typically have an increase in cross-sectional area. The purpose of this study was to measure the cross-sectional area and circumference of symptomatic and asymptomatic greater occipital nerves in patients with unilateral occipital neuralgia and to correlate the greater occipital nerve cross-sectional area with headache severity, sex, and body mass index. Both symptomatic and contralateral asymptomatic greater occipital nerve cross-sectional areas and circumferences were measured by a single examiner using sonography in 17 patients. The Wilcoxon signed rank test and Spearman rank order correlation coefficient were used to analyze the data. Significant differences between the cross-sectional areas and circumferences of the symptomatic and asymptomatic greater occipital nerves were noted (P < .001). No difference existed in cross-sectional area (P = .40) or circumference (P = .10) measurements of the nerves between male and female patients. A significant correlation existed between the body mass index and symptomatic (r = 0.424; P = .045) and asymptomatic (r = 0.443; P = .037) cross-sectional areas. There was no correlation shown between the cross-sectional area of the symptomatic nerve and the severity of Headache Impact Test 6 scores (r = -0.342; P = .179). We report sonographic evidence showing an increased cross-sectional area and circumference of the symptomatic greater occipital nerve in patients with unilateral occipital neuralgia.

Managing the Quality of Cross-Border Higher Education in Zimbabwe

ERIC Educational Resources Information Center

Garwe, Evelyn Chiyevo

2015-01-01

A study on investigating the issues of quality associated with cross-border higher education was carried out using the case study approach focusing on Zimbabwe. The methodology involved document analysis of the cases of regulation and accreditation of cross-border higher education providers and assessment of qualifications acquired from foreign…

Annular-Cross-Section CFE Chamber

NASA Technical Reports Server (NTRS)

Sharnez, Rizwan; Sammons, David W.

1994-01-01

Proposed continuous-flow-electrophoresis (CFE) chamber of annular cross section offers advantages over conventional CFE chamber, and wedge-cross-section chamber described in "Increasing Sensitivity in Continuous-Flow Electrophoresis" (MFS-26176). In comparison with wedge-shaped chamber, chamber of annular cross section virtually eliminates such wall effects as electro-osmosis and transverse gradients of velocity. Sensitivity enhanced by incorporating gradient maker and radial (collateral) flow.

Semi-empirical and empirical L X-ray production cross sections for elements with 50 ⩽ Z ⩽ 92 for protons of 0.5 3.0 MeV

NASA Astrophysics Data System (ADS)

Nekab, M.; Kahoul, A.

2006-04-01

We present in this contribution, semi-empirical production cross sections of the main X-ray lines Lα, Lβ and Lγ for elements from Sn to U and for protons with energies varying from 0.5 to 3.0 MeV. The theoretical X-ray production cross sections are firstly calculated from the theoretical ionization cross sections of the L i ( i = 1, 2, 3) subshell within the ECPSSR theory. The semi-empirical Lα, Lβ and Lγ cross sections are then deduced by fitting the available experimental data normalized to their corresponding theoretical values and give the better representation of the experimental data in some cases. On the other hand, the experimental data are directly fitted to deduce the empirical L X-ray production cross sections. A comparison is made between the semi-empirical cross sections, the empirical cross sections reported in this work and the empirical ones reported by Reis and Jesus [M.A. Reis, A.P. Jesus, Atom. Data Nucl. Data Tables 63 (1996) 1] and those of Strivay and Weber [Strivay, G. Weber, Nucl. Instr. and Meth. B 190 (2002) 112].

Measurement of electron impact collisional excitation cross sections of Ni to Ge-like gold

DOE PAGES

May, M. J.; Beiersdorfer, P.; Jordan, N.; ...

2017-03-01

We have measured the collisional excitation cross sections for the 3d→4f and 3d→5f excitations in Au ions near the Ni-like charge state by using beam plasmas created in the Livermore electron beam ion trap EBIT-I. The cross sections have been experimentally determined at approximately 1, 2 and 3 keV above the threshold energy, ET, for the 3d→4f excitations (ET ~2.5 keV) and at approximately 0.1, 1 and 2 keV above the threshold energy for the 3d→5f excitations (ET ~3.3 keV). The cross section measurements were made possible by using the GSFC x-ray microcalorimeter at the Livermore EBIT facility. The absolutemore » cross sections are determined from the ratio of the intensity of the collisionally excited bound-bound transitions to the intensity of the radiative recombination lines produced in EBIT-I plasmas. The effects of polarization and Auger decay channels are accounted for in the cross section determination. Measured cross sections are compared with those from HULLAC, DWS and FAC calculations. Finally, the measurements demonstrate that some errors exist in the calculated excitation cross sections.« less

Measurement of electron impact collisional excitation cross sections of Ni to Ge-like gold

NASA Astrophysics Data System (ADS)

May, M. J.; Beiersdorfer, P.; Jordan, N.; Scofield, J. H.; Reed, K. J.; Brown, G. V.; Hansen, S. B.; Porter, F. S.; Kelley, R.; Kilbourne, C. A.; Boyce, K. R.

2017-03-01

We have measured the collisional excitation cross sections for the 3d→4f and 3d→5f excitations in Au ions near the Ni-like charge state by using beam plasmas created in the Livermore electron beam ion trap EBIT-I. The cross sections have been experimentally determined at approximately 1, 2 and 3 keV above the threshold energy, ET, for the 3d→4f excitations (ET ˜ 2.5 keV) and at approximately 0.1, 1 and 2 keV above the threshold energy for the 3d→5f excitations (ET ˜ 3.3 keV). The cross section measurements were made possible by using the GSFC x-ray microcalorimeter at the Livermore EBIT facility. The absolute cross sections are determined from the ratio of the intensity of the collisionally excited bound-bound transitions to the intensity of the radiative recombination lines produced in EBIT-I plasmas. The effects of polarization and Auger decay channels are accounted for in the cross section determination. Measured cross sections are compared with those from HULLAC, DWS and FAC calculations. The measurements demonstrate that some errors exist in the calculated excitation cross sections.

Neutron Thermal Cross Sections, Westcott Factors, Resonance Integrals, Maxwellian Averaged Cross Sections and Astrophysical Reaction Rates Calculated from the ENDF/B-VII.1, JEFF-3.1.2, JENDL-4.0, ROSFOND-2010, CENDL-3.1 and EAF-2010 Evaluated Data Libraries

NASA Astrophysics Data System (ADS)

Pritychenko, B.; Mughabghab, S. F.

2012-12-01

We present calculations of neutron thermal cross sections, Westcott factors, resonance integrals, Maxwellian-averaged cross sections and astrophysical reaction rates for 843 ENDF materials using data from the major evaluated nuclear libraries and European activation file. Extensive analysis of newly-evaluated neutron reaction cross sections, neutron covariances, and improvements in data processing techniques motivated us to calculate nuclear industry and neutron physics quantities, produce s-process Maxwellian-averaged cross sections and astrophysical reaction rates, systematically calculate uncertainties, and provide additional insights on currently available neutron-induced reaction data. Nuclear reaction calculations are discussed and new results are presented. Due to space limitations, the present paper contains only calculated Maxwellian-averaged cross sections and their uncertainties. The complete data sets for all results are published in the Brookhaven National Laboratory report.

A method for calculating proton-nucleus elastic cross-sections

NASA Technical Reports Server (NTRS)

Tripathi, R. K.; Wilson, J. W.; Cucinotta, F. A.

2002-01-01

Recently [Nucl. Instr. and Meth. B 145 (1998) 277; Extraction of in-medium nucleon-nucleon amplitude from experiment, NASA-TP, 1998], we developed a method of extracting nucleon-nucleon (N-N) cross-sections in the medium directly from experiment. The in-medium N-N cross-sections form the basic ingredients of several heavy-ion scattering approaches including the coupled-channel approach developed at the NASA Langley Research Center. We investigated [Proton-nucleus total cross-sections in coupled-channel approach, NASA/TP, 2000; Nucl. Instr. and Meth. B 173-174 (2001) 391] the ratio of real to imaginary part of the two body scattering amplitude in the medium. These ratios are used in combination with the in-medium N-N cross-sections to calculate proton-nucleus elastic cross-sections. The agreement is excellent with the available experimental data. These cross-sections are needed for the radiation risk assessment of space missions. c2002 Elsevier Science B.V. All rights reserved.

Single step sequential polydimethylsiloxane wet etching to fabricate a microfluidic channel with various cross-sectional geometries

NASA Astrophysics Data System (ADS)

Wang, C.-K.; Liao, W.-H.; Wu, H.-M.; Lo, Y.-H.; Lin, T.-R.; Tung, Y.-C.

2017-11-01

Polydimethylsiloxane (PDMS) has become a widely used material to construct microfluidic devices for various biomedical and chemical applications due to its desirable material properties and manufacturability. PDMS microfluidic devices are usually fabricated using soft lithography replica molding methods with master molds made of photolithogrpahy patterned photoresist layers on silicon wafers. The fabricated microfluidic channels often have rectangular cross-sectional geometries with single or multiple heights. In this paper, we develop a single step sequential PDMS wet etching process that can be used to fabricate microfluidic channels with various cross-sectional geometries from single-layer PDMS microfluidic channels. The cross-sections of the fabricated channel can be non-rectangular, and varied along the flow direction. Furthermore, the fabricated cross-sectional geometries can be numerically simulated beforehand. In the experiments, we fabricate microfluidic channels with various cross-sectional geometries using the developed technique. In addition, we fabricate a microfluidic mixer with alternative mirrored cross-sectional geometries along the flow direction to demonstrate the practical usage of the developed technique.

The formation of excited atoms during charge exchange between hydrogen ions and alkali atoms. Ph.D. Thesis

NASA Technical Reports Server (NTRS)

Nieman, R. A.

1971-01-01

The charge exchange cross sections for protons and various alkali atoms are calculated using the classical approximation of Gryzinski. It is assumed that the hydrogen atoms resulting from charge exchange exist in all possible excited states. Charge transfer collisions between protons and potassium as well as protons and sodium atoms are studied. The energy range investigated is between 4 and 30 keV. The theoretical calculations of the capture cross section and the cross section for the creation of metastable 2S hydrogen are compared to experimental values. Good quantitative agreement is found for the capture cross section but only qualitative agreement for the metastable cross section. Analysis of the Lyman alpha window in molecular oxygen suggests that measured values of the metastable cross section may be in error. Thick alkali target data are also presented. This allows the determination of the total electron loss cross section. Finally, some work was done with H2(+).

Angular distributions for H- formation in single collisions of H+ on Mg

NASA Astrophysics Data System (ADS)

Alvarez, I.; Cisneros, C.; Russek, A.

1982-07-01

Absolute differential cross sections have been measured for H- formation in single collisions of H+ on Mg in the energy range from 0.5 to 5.0 keV. Total cross sections, obtained by direct integration of these differential cross sections, are in good agreement with earlier total-cross-section measurements of Morgan and Eriksen in the energy range common to the two experiments and are in good agreement with the calculated total cross sections of Olson and Liu. The differential cross sections are strongly peaked in the forward direction. The functional form and scaling properties of this forward peak strongly indicate that it is a glory maximum, which occurs when the classical deflection function changes over from attractive to repulsive at some finite impact parameter. The differential cross sections from 1.0 to 5.0 keV show no other structure, but below 1.0 keV a τ-dependent structure is observed which becomes more pronounced as the collision energy decreases. 1982 The American Physical Society.

Neutron Fission of 235,237,239U and 241,243Pu: Cross Sections, Integral Cross Sections and Cross Sections on Excited States

DOE Office of Scientific and Technical Information (OSTI.GOV)

Younes, W; Britt, H C

In a recent paper submitted to Phys. Rev. C they have presented estimates for (n,f) cross sections on a series of Thorium, Uranium and Plutonium isotopes over the range E{sub n} = 0.1-2.5 MeV. The (n,f) cross sections for many of these isotopes are difficult or impossible to measure in the laboratory. The cross sections were obtained from previous (t,pf) reaction data invoking a model which takes into account the differences between (t,pf) and (n,f) reaction processes, and which includes improved estimates for the neutron compound formation process. The purpose of this note is: (1) to compare the estimated crossmore » sections to current data files in both ENDF and ENDL databases; (2) to estimate ratios of cross sections relatively to {sup 235}U integrated over the ''tamped flattop'' critical assembly spectrum that was used in the earlier {sup 237}U report; and (3) to show the effect on the integral cross sections when the neutron capturing state is an excited rotational state or an isomer. The isomer and excited state results are shown for {sup 235}U and {sup 237}U.« less

Effect of reagent rotation on the integral cross-sections and isotopic branching of the reactions H - + HD and D - + HD

NASA Astrophysics Data System (ADS)

Zhang, Wei; Liu, Yufang; He, Xiaohu

2010-04-01

A quasi-classical trajectory (QCT) method has been used to calculate integral reaction cross-section for H - + HD and D - + HD. The influence of rotation of the reagent on the integral reaction cross-section and the product branching ratios of the title reactions are discussed. The results indicate that the reactive cross-section of H(D) - + HD → HH(D) + D - decreases with an increase of the j for E tran ⩽ 1.5 eV. The results also show that the reactive cross-section of D(H) - + HD → DD(H) + H - decreases with an increase of the j for E tran ⩽ 1.0 eV and that the integral cross-sections of title reactions are sensitive to the reagent rotation.

Evaluation of cross sections for neutron-induced reactions in sodium. [10/sup -5/ eV to 20 MeV

DOE Office of Scientific and Technical Information (OSTI.GOV)

Larson, D.C.

1980-09-01

An evaluation of the neutron-induced cross sections of /sup 23/Na has been done for the energy range from 10/sup -5/ eV to 20 MeV. All significant cross sections are given, including differential cross sections for production of gamma rays. The recommended values are based on experimental data where available, and use results of a consistent model code analysis of available data to predict cross sections where there are no experimental data. This report describes the evaluation that was submitted to the Cross Section Evaluation Working Group (CSEWG) for consideration as a part of the Evaluated Nuclear Data File, Version V,more » and subsequently issued as MAT 1311. 126 references, 130 figures, 14 tables.« less

Three-dimensional object surface identification

NASA Astrophysics Data System (ADS)

Celenk, Mehmet

1995-03-01

This paper describes a computationally efficient matching method for inspecting 3D objects using their serial cross sections. Object regions of interest in cross-sectional binary images of successive slices are aligned with those of the models. Cross-sectional differences between the object and the models are measured in the direction of the gradient of the cross section boundary. This is repeated in all the cross-sectional images. The model with minimum average cross-sectional difference is selected as the best match to the given object (i.e., no defect). The method is tested using various computer generated surfaces and matching results are presented. It is also demonstrated using Symult S-2010 16-node system that the method is suitable for parallel implementation in massage passing processors with the maximum attainable speedup (close to 16 for S-2010).

Polynomial coefficients for calculating O2 Schumann-Runge cross sections at 0.5/cm resolution

NASA Technical Reports Server (NTRS)

Minschwaner, K.; Anderson, G. P.; Hall, L. A.; Yoshino, K.

1992-01-01

O2 cross sections from 49,000 to 57,000/cm have been fitted with temperature dependent polynomial expressions, providing an accurate and efficient means of determining Schumann-Runge band cross sections for temperatures between 130 and 500 K. The least squares fits were carried out on a 0.5/cm spectral grid, using cross sections obtained from a Schumann-Runge line-by-line model that incorporates the most recent spectroscopic data. The O2 cross sections do not include the underlying Herzberg continuum, but they do contain contributions from the temperature dependent Schumann-Runge continuum. The cross sections are suitable for use in UV transmission calculations at high spectral resolution. They should also prove useful for updating existing parameterizations of ultraviolet transmission and O2 photolysis.

An Equivalent cross-section Framework for improving computational efficiency in Distributed Hydrologic Modelling

NASA Astrophysics Data System (ADS)

Khan, Urooj; Tuteja, Narendra; Ajami, Hoori; Sharma, Ashish

2014-05-01

While the potential uses and benefits of distributed catchment simulation models is undeniable, their practical usage is often hindered by the computational resources they demand. To reduce the computational time/effort in distributed hydrological modelling, a new approach of modelling over an equivalent cross-section is investigated where topographical and physiographic properties of first-order sub-basins are aggregated to constitute modelling elements. To formulate an equivalent cross-section, a homogenization test is conducted to assess the loss in accuracy when averaging topographic and physiographic variables, i.e. length, slope, soil depth and soil type. The homogenization test indicates that the accuracy lost in weighting the soil type is greatest, therefore it needs to be weighted in a systematic manner to formulate equivalent cross-sections. If the soil type remains the same within the sub-basin, a single equivalent cross-section is formulated for the entire sub-basin. If the soil type follows a specific pattern, i.e. different soil types near the centre of the river, middle of hillslope and ridge line, three equivalent cross-sections (left bank, right bank and head water) are required. If the soil types are complex and do not follow any specific pattern, multiple equivalent cross-sections are required based on the number of soil types. The equivalent cross-sections are formulated for a series of first order sub-basins by implementing different weighting methods of topographic and physiographic variables of landforms within the entire or part of a hillslope. The formulated equivalent cross-sections are then simulated using a 2-dimensional, Richards' equation based distributed hydrological model. The simulated fluxes are multiplied by the weighted area of each equivalent cross-section to calculate the total fluxes from the sub-basins. The simulated fluxes include horizontal flow, transpiration, soil evaporation, deep drainage and soil moisture. To assess the accuracy of equivalent cross-section approach, the sub-basins are also divided into equally spaced multiple hillslope cross-sections. These cross-sections are simulated in a fully distributed settings using the 2-dimensional, Richards' equation based distributed hydrological model. The simulated fluxes are multiplied by the contributing area of each cross-section to get total fluxes from each sub-basin referred as reference fluxes. The equivalent cross-section approach is investigated for seven first order sub-basins of the McLaughlin catchment of the Snowy River, NSW, Australia, and evaluated in Wagga-Wagga experimental catchment. Our results show that the simulated fluxes using an equivalent cross-section approach are very close to the reference fluxes whereas computational time is reduced of the order of ~4 to ~22 times in comparison to the fully distributed settings. The transpiration and soil evaporation are the dominant fluxes and constitute ~85% of actual rainfall. Overall, the accuracy achieved in dominant fluxes is higher than the other fluxes. The simulated soil moistures from equivalent cross-section approach are compared with the in-situ soil moisture observations in the Wagga-Wagga experimental catchment in NSW, and results found to be consistent. Our results illustrate that the equivalent cross-section approach reduces the computational time significantly while maintaining the same order of accuracy in predicting the hydrological fluxes. As a result, this approach provides a great potential for implementation of distributed hydrological models at regional scales.

Assessment of experimental d-PIGE γ-ray production cross sections for 12C, 14N and 16O and comparison with absolute thick target yields

NASA Astrophysics Data System (ADS)

Csedreki, L.; Halász, Z.; Kiss, Á. Z.

2016-08-01

Measured differential cross sections for deuteron induced γ-ray emission from the reactions 12C(d,pγ)13C, (Eγ = 3089 keV), 14N(d,pγ)15N (Eγ = 8310 keV) and 16O(d,pγ)17O (Eγ = 871 keV) available in the literature were assessed. In order to cross check the assessed γ-ray production cross section data, thick target γ-yields calculated from the differential cross sections were compared with available measured thick target yields. Recommended differential cross section data for each reaction were deduced for particle induced γ-ray emission (PIGE) applications.

3D methodology for evaluating rail crossing roughness.

DOT National Transportation Integrated Search

2015-03-02

Description of Research Project The overall objective of this project is to investigate develop a quantitative method or measure for determining the need to rehabilitate rail crossings. The scope of the project includes investigation of sensor capabi...

Theoretical and Methodological Considerations in Cross-Generational Research on Parenting and Child Aggressive Behavior

PubMed Central

Dubow, Eric F.; Huesmann, L. Rowell; Boxer, Paul

2015-01-01

The four studies in this special issue represent important advances in research on the intergenerational transmission of aggressive behavior. In this commentary, we review the key features and findings of these studies, as well as our own cross-generational study of aggression, the Columbia County Longitudinal Study. Next, we consider important theoretical issues (e.g., defining and operationalizing “aggression” and “parenting”; assessing reciprocal effects of parenting and child aggression; identifying the ages at which aggression should be assessed across generations; broadening the investigation of contextual and individual factors). We then discuss several methodological issues (e.g., determining the most informative measurement intervals for assessing prospective effects; sampling considerations; measuring potential moderating and mediating variables that might explain cross-generational continuities and discontinuities in parenting and aggression). Finally, we raise implications of cross-generational research for designing interventions targeting the reduction and prevention of child aggression. PMID:12735400

2016 Workplace and Gender Relations Survey of Active Duty Members: Overview Report

DTIC Science & Technology

2017-05-01

Grifka 1 Chapter 2: Survey Methodology Ms. Lisa Davis, Mr. Eric Falk, and Mr. Jeff Schneider 19 Chapter 3: Estimated Sexual Assault...assessing the gender relations environment across the Services. Study Background and Methodology Study Background The Defense Research, Surveys, and...gender discrimination. 3 Chapter 1 provides additional information on the construction of these metrics. Survey Methodology OPA conducts DoD cross

Electron-impact excitation cross sections for the b /sup 3/. sigma. /sub u//sup +/ state of H/sub 2/

DOE Office of Scientific and Technical Information (OSTI.GOV)

Khakoo, M.A.; Trajmar, S.; McAdams, R.

1987-04-01

Differential and integral cross sections for electron-impact excitation of the b /sup 3/..sigma../sub u//sup +/ state of H/sub 2/ have been determined in the 20--100-eV impact energy region. The calibration of the cross sections was achieved through the H/sub 2/ elastic scattering cross sections, which in turn were normalized to absolute He elastic scattering cross sections. Comparison is made with available experimental data and with theoretical results applying Born-Ochkur-Rudge, distorted-wave, and close-coupling approximations.

New Tools to Prepare ACE Cross-section Files for MCNP Analytic Test Problems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brown, Forrest B.

Monte Carlo calculations using one-group cross sections, multigroup cross sections, or simple continuous energy cross sections are often used to: (1) verify production codes against known analytical solutions, (2) verify new methods and algorithms that do not involve detailed collision physics, (3) compare Monte Carlo calculation methods with deterministic methods, and (4) teach fundamentals to students. In this work we describe 2 new tools for preparing the ACE cross-section files to be used by MCNP ® for these analytic test problems, simple_ace.pl and simple_ace_mg.pl.

Measurement of Charged and Neutral Current e-p Deep Inelastic Scattering Cross Sections at High Q2

NASA Astrophysics Data System (ADS)

Derrick, M.; Krakauer, D.; Magill, S.; Mikunas, D.; Musgrave, B.; Repond, J.; Stanek, R.; Talaga, R. L.; Zhang, H.; Ayad, R.; Bari, G.; Basile, M.; Bellagamba, L.; Boscherini, D.; Bruni, A.; Bruni, G.; Bruni, P.; Cara Romeo, G.; Castellini, G.; Chiarini, M.; Cifarelli, L.; Cindolo, F.; Contin, A.; Corradi, M.; Gialas, I.; Giusti, P.; Iacobucci, G.; Laurenti, G.; Levi, G.; Margotti, A.; Massam, T.; Nania, R.; Nemoz, C.; Palmonari, F.; Polini, A.; Sartorelli, G.; Timellini, R.; Zamora Garcia, Y.; Zichichi, A.; Bargende, A.; Crittenden, J.; Desch, K.; Diekmann, B.; Doeker, T.; Eckert, M.; Feld, L.; Frey, A.; Geerts, M.; Geitz, G.; Grothe, M.; Haas, T.; Hartmann, H.; Haun, D.; Heinloth, K.; Hilger, E.; Jakob, H.-P.; Katz, U. F.; Mari, S. M.; Mass, A.; Mengel, S.; Mollen, J.; Paul, E.; Rembser, Ch.; Schattevoy, R.; Schramm, D.; Stamm, J.; Wedemeyer, R.; Campbell-Robson, S.; Cassidy, A.; Dyce, N.; Foster, B.; George, S.; Gilmore, R.; Heath, G. P.; Heath, H. F.; Llewellyn, T. J.; Morgado, C. J.; Norman, D. J.; O'Mara, J. A.; Tapper, R. J.; Wilson, S. S.; Yoshida, R.; Rau, R. R.; Arneodo, M.; Iannotti, L.; Schioppa, M.; Susinno, G.; Bernstein, A.; Caldwell, A.; Cartiglia, N.; Parsons, J. A.; Ritz, S.; Sciulli, F.; Straub, P. B.; Wai, L.; Yang, S.; Zhu, Q.; Borzemski, P.; Chwastowski, J.; Eskreys, A.; Piotrzkowski, K.; Zachara, M.; Zawiejski, L.; Adamczyk, L.; Bednarek, B.; Jeleń, K.; Kisielewska, D.; Kowalski, T.; Rulikowska-Zarȩbska, E.; Suszycki, L.; ZajaÇ, J.; Kotański, A.; Przybycień, M.; Bauerdick, L. A.; Behrens, U.; Beier, H.; Bienlein, J. K.; Coldewey, C.; Deppe, O.; Desler, K.; Drews, G.; Flasiński, M.; Gilkinson, D. J.; Glasman, C.; Göttlicher, P.; Grosse-Knetter, J.; Gutjahr, B.; Hain, W.; Hasell, D.; Hessling, H.; Hultschig, H.; Iga, Y.; Joos, P.; Kasemann, M.; Klanner, R.; Koch, W.; Köpke, L.; Kötz, U.; Kowalski, H.; Labs, J.; Ladage, A.; Löhr, B.; Löwe, M.; Lüke, D.; Mańczak, O.; Ng, J. S.; Nickel, S.; Notz, D.; Ohrenberg, K.; Roco, M.; Rohde, M.; Roldán, J.; Schneekloth, U.; Schulz, W.; Selonke, F.; Stiliaris, E.; Surrow, B.; Voss, T.; Westphal, D.; Wolf, G.; Youngman, C.; Zhou, J. F.; Grabosch, H. J.; Kharchilava, A.; Leich, A.; Mattingly, M.; Meyer, A.; Schlenstedt, S.; Wulff, N.; Barbagli, G.; Pelfer, P.; Anzivino, G.; Maccarrone, G.; de Pasquale, S.; Votano, L.; Bamberger, A.; Eisenhardt, S.; Freidhof, A.; Söldner-Rembold, S.; Schroeder, J.; Trefzger, T.; Brook, N. H.; Bussey, P. J.; Doyle, A. T.; Fleck, J. I.; Saxon, D. H.; Utley, M. L.; Wilson, A. S.; Dannemann, A.; Holm, U.; Horstmann, D.; Neumann, T.; Sinkus, R.; Wick, K.; Badura, E.; Burow, B. D.; Hagge, L.; Lohrmann, E.; Mainusch, J.; Milewski, J.; Nakahata, M.; Pavel, N.; Poelz, G.; Schott, W.; Zetsche, F.; Bacon, T. C.; Butterworth, I.; Gallo, E.; Harris, V. L.; Hung, B. Y.; Long, K. R.; Miller, D. B.; Morawitz, P. P.; Prinias, A.; Sedgbeer, J. K.; Whitfield, A. F.; Mallik, U.; McCliment, E.; Wang, M. Z.; Wang, S. M.; Wu, J. T.; Zhang, Y.; Cloth, P.; Filges, D.; An, S. H.; Hong, S. M.; Nam, S. W.; Park, S. K.; Suh, M. H.; Yon, S. H.; Imlay, R.; Kartik, S.; Kim, H.-J.; McNeil, R. R.; Metcalf, W.; Nadendla, V. K.; Barreiro, F.; Cases, G.; Graciani, R.; Hernández, J. M.; Hervás, L.; Labarga, L.; del Peso, J.; Puga, J.; Terron, J.; de Trocóniz, J. F.; Smith, G. R.; Corriveau, F.; Hanna, D. S.; Hartmann, J.; Hung, L. W.; Lim, J. N.; Matthews, C. G.; Patel, P. M.; Sinclair, L. E.; Stairs, D. G.; St. Laurent, M.; Ullmann, R.; Zacek, G.; Bashkirov, V.; Dolgoshein, B. A.; Stifutkin, A.; Bashindzhagyan, G. L.; Ermolov, P. F.; Gladilin, L. K.; Golubkov, Y. A.; Kobrin, V. D.; Kuzmin, V. A.; Proskuryakov, A. S.; Savin, A. A.; Shcheglova, L. M.; Solomin, A. N.; Zotov, N. P.; Botje, M.; Chlebana, F.; Dake, A.; Engelen, J.; de Kamps, M.; Kooijman, P.; Kruse, A.; Tiecke, H.; Verkerke, W.; Vreeswijk, M.; Wiggers, L.; de Wolf, E.; van Woudenberg, R.; Acosta, D.; Bylsma, B.; Durkin, L. S.; Honscheid, K.; Li, C.; Ling, T. Y.; McLean, K. W.; Murray, W. N.; Park, I. H.; Romanowski, T. A.; Seidlein, R.; Bailey, D. S.; Blair, G. A.; Byrne, A.; Cashmore, R. J.; Cooper-Sarkar, A. M.; Daniels, D.; Devenish, R. C.; Harnew, N.; Lancaster, M.; Luffman, P. E.; Lindemann, L.; McFall, J. D.; Nath, C.; Noyes, V. A.; Quadt, A.; Uijterwaal, H.; Walczak, R.; Wilson, F. F.; Yip, T.; Abbiendi, G.; Bertolin, A.; Brugnera, R.; Carlin, R.; dal Corso, F.; de Giorgi, M.; Dosselli, U.; Limentani, S.; Morandin, M.; Posocco, M.; Stanco, L.; Stroili, R.; Voci, C.; Bulmahn, J.; Butterworth, J. M.; Feild, R. G.; Oh, B. Y.; Whitmore, J. J.; D'Agostini, G.; Marini, G.; Nigro, A.; Tassi, E.; Hart, J. C.; McCubbin, N. A.; Prytz, K.; Shah, T. P.; Short, T. L.; Barberis, E.; Dubbs, T.; Heusch, C.; van Hook, M.; Hubbard, B.; Lockman, W.; Rahn, J. T.; Sadrozinski, H. F.-W.; Seiden, A.; Biltzinger, J.; Schwarzer, O.; Seifert, R. J.; Walenta, A. H.; Zech, G.; Abramowicz, H.; Briskin, G.; Dagan, S.; Levy, A.; Hasegawa, T.; Hazumi, M.; Ishii, T.; Kuze, M.; Mine, S.; Nagasawa, Y.; Nakao, M.; Suzuki, I.; Tokushuku, K.; Yamada, S.; Yamazaki, Y.; Chiba, M.; Hamatsu, R.; Hirose, T.; Homma, K.; Kitamura, S.; Nakamitsu, Y.; Yamauchi, K.; Cirio, R.; Costa, M.; Ferrero, M. I.; Lamberti, L.; Maselli, S.; Peroni, C.; Sacchi, R.; Solano, A.; Staiano, A.; Dardo, M.; Bailey, D. C.; Bandyopadhyay, D.; Benard, F.; Brkic, M.; Crombie, M. B.; Gingrich, D. M.; Hartner, G. F.; Joo, K. K.; Levman, G. M.; Martin, J. F.; Orr, R. S.; Sampson, C. R.; Teuscher, R. J.; Catterall, C. D.; Jones, T. W.; Kaziewicz, P. B.; Lane, J. B.; Saunders, R. L.; Shulman, J.; Blankenship, K.; Kochocki, J.; Lu, B.; Mo, L. W.; Bogusz, W.; Charchuła, K.; Ciborowski, J.; Gajewski, J.; Grzelak, G.; Kasprzak, M.; Krzyżanowski, M.; Muchorowski, K.; Nowak, R. J.; Pawlak, J. M.; Tymieniecka, T.; Wróblewski, A. K.; Zakrzewski, J. A.; Żarnecki, A. F.; Adamus, M.; Eisenberg, Y.; Karshon, U.; Revel, D.; Zer-Zion, D.; Ali, I.; Badgett, W. F.; Behrens, B.; Dasu, S.; Fordham, C.; Foudas, C.; Goussiou, A.; Loveless, R. J.; Reeder, D. D.; Silverstein, S.; Smith, W. H.; Vaiciulis, A.; Wodarczyk, M.; Tsurugai, T.; Bhadra, S.; Cardy, M. L.; Fagerstroem, C.-P.; Frisken, W. R.; Furutani, K. M.; Khakzad, M.; Schmidke, W. B.

1995-08-01

Deep inelastic e-p scattering has been studied in both the charged current (CC) and neutral current (NC) reactions at momentum transfers squared Q2 above 400 GeV2 using the ZEUS detector at the HERA ep collider. The CC and NC total cross sections, the NC to CC cross section ratio, and the differential cross sections dσ/dQ2 are presented. From the Q2 dependence of the CC cross section, the mass term in the CC propagator is determined to be MW = 76+/-16+/-13 GeV.

Effects of silicon cross section and neutron spectrum on the radial uniformity in neutron transmutation doping.

PubMed

Kim, Haksung; Ho Pyeon, Cheol; Lim, Jae-Yong; Misawa, Tsuyoshi

2012-01-01

The effects of silicon cross section and neutron spectrum on the radial uniformity of a Si-ingot are examined experimentally with various neutron spectrum conditions. For the cross section effect, the numerical results using silicon single crystal cross section reveal good agreements with experiments within relative difference of 6%, whereas the discrepancy is approximately 20% in free-gas cross section. For the neutron spectrum effect, the radial uniformity in hard neutron spectrum is found to be more flattening than that in soft spectrum. Copyright © 2011 Elsevier Ltd. All rights reserved.

Electron-Impact Total Ionization Cross Sections of CH and C2H2

PubMed Central

Kim, Yong-Ki; Ali, M. Asgar; Rudd, M. Eugene

1997-01-01

Electron-impact total ionization cross sections for the CH radical and C2H2 (acetylene) have been calculated using the Binary-Encounter-Bethe (BEB) model. The BEB model combines the Mott cross section and the asymptotic form of the Bethe theory, and has been shown to generate reliable ionization cross sections for a large variety of molecules. The BEB cross sections for CH and C2H2 are in good agreement with the available experimental data from ionization thresholds to hundreds of eV in incident energies. PMID:27805116

Total reaction cross sections and neutron-removal cross sections of neutron-rich light nuclei measured by the COMBAS fragment-separator

NASA Astrophysics Data System (ADS)

Hue, B. M.; Isataev, T.; Erdemchimeg, B.; Artukh, A. G.; Aznabaev, D.; Davaa, S.; Klygin, S. A.; Kononenko, G. A.; Khuukhenkhuu, G.; Kuterbekov, K.; Lukyanov, S. M.; Mikhailova, T. I.; Maslov, V. A.; Mendibaev, K.; Sereda, Yu M.; Penionzhkevich, Yu E.; Vorontsov, A. N.

2017-12-01

Preliminary results of measurements of the total reaction cross sections σR and neutron removal cross section σ-xn for weakly bound 6He, 8Li, 9Be and 10Be nuclei at energy range (20-35) A MeV with 28Si target is presented. The secondary beams of light nuclei were produced by bombardment of the 22Ne (35 A MeV) primary beam on Be target and separated by COMBAS fragment-separator. In dispersive focal plane a horizontal slit defined the momentum acceptance as 1% and a wedge degrader of 200 μm Al was installed. The Bρ of the second section of the fragment-separator was adjusted for measurements in energy range (20-35) A MeV. Two-neutron removal cross sections for 6He and 10Be and one -neutron removal cross sections 8Li and 9Be were measured.

Bodies with noncircular cross sections and bank-to-turn missiles

NASA Technical Reports Server (NTRS)

Jackson, C. M., Jr.; Sawyer, W. C.

1986-01-01

An evaluation is made of prospective missile applications for noncircular cross section bodies, and of recent developments in bank-to-turn missile configuration aerodynamics. The discussion encompasses cross-flow analysis techniques, as well as study results obtained for bodies with elliptical and square cross sections and with variable cross sections. Attention is given to both the performance advantages and the stability and control problems of bank-to-turn missile configurations; the aerodynamic data presented for monoplanar configurations extend to those incorporating airbreathing propulsion systems.

Cross sections for the dissociative attachment of electrons to NO

NASA Technical Reports Server (NTRS)

Krishnakumar, E.; Srivastava, S. K.

1988-01-01

Cross sections for the production of O(-) by electron attachment to NO are reported. It is found that the maximum value of the cross section is about 52 percent higher than the measurement of Rapp and Briglia (1965). Cross sections for the process of polar dissociation, e + NO yields N(+) + O(_), have also been measured, and the threshold energy for this process has been obtained.

Bone strength and athletic ability in hominids: Ardipithecus ramidus to Homo sapiens

NASA Astrophysics Data System (ADS)

Lee, Scott

2012-10-01

A methodology for the evaluation of the athletic ability of animals based on the strength of their femur and their body mass is developed. The ability of the femur to resist bending stresses is determined by its midlength cross-sectional geometry, its length and the elastic properties of the mineral part of the bone. The animal's athletic ability, determined by a ``bone strength index,'' is limited by this femoral bending strength in relation to the loads on the femur. This analysis is applied to the fossil record for Homo sapiens, Homo neanderthalensis, Homo erectus, Homo habilis, Australopithecus afarensis and Ardipithecus ramidus. Evidence that the femoral bone strength index of modern Homo sapiens has weakened over the last 50,000 years is found.

Uncertainty quantification of fiber orientation distribution measurements for long-fiber-reinforced thermoplastic composites

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sharma, Bhisham N.; Naragani, Diwakar; Nguyen, Ba Nghiep

We present a detailed methodology for experimental measurement of fiber orientation distribution (FOD) in injection-molded discontinuous fiber composites using the method of ellipses on 2D cross sections. Best practices to avoid biases occurring during surface preparation and optical imaging of carbon-fiber-reinforced thermoplastics are discussed. A marker-based watershed transform routine for efficient image segmentation and the separation of touching fiber ellipses is developed. The sensitivity of the averaged orientation tensor to the image sample size is studied for the case of long-fiber thermoplastics. A Mori-Tanaka implementation of the Eshelby model is then employed to quantify the sensitivity of elastic stiffness predictionsmore » to biases in the FOD measurements.« less