Sample records for cross section oriented

  1. Quantum-confinement effects on conduction band structure of rectangular cross-sectional GaAs nanowires

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Tanaka, H., E-mail: tanaka@semicon.kuee.kyoto-u.ac.jp; Morioka, N.; Mori, S.

    2014-02-07

    The conduction band structure and electron effective mass of GaAs nanowires with various cross-sectional shapes and orientations were calculated by two methods, a tight-binding method and an effective mass equation taking the bulk full-band structure into account. The effective mass of nanowires increases as the cross-sectional size decreases, and this increase in effective mass depends on the orientations and substrate faces of nanowires. Among [001], [110], and [111]-oriented rectangular cross-sectional GaAs nanowires, [110]-oriented nanowires with wider width along the [001] direction showed the lightest effective mass. This dependence originates from the anisotropy of the Γ valley of bulk GaAs. Themore » relationship between effective mass and bulk band structure is discussed.« less

  2. Electronic structures of [001]- and [111]-oriented InSb and GaSb free-standing nanowires

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Liao, Gaohua; Department of Applied Physics and Key Laboratory for Micro-Nano Physics and Technology of Hunan Province, Hunan University, Changsha 410082; Luo, Ning

    We report on a theoretical study of the electronic structures of InSb and GaSb nanowires oriented along the [001] and [111] crystallographic directions. The nanowires are described by atomistic, tight-binding models, including spin-orbit interaction. The band structures and the wave functions of the nanowires are calculated by means of a Lanczos iteration algorithm. For the [001]-oriented InSb and GaSb nanowires, the systems with both square and rectangular cross sections are considered. Here, it is found that all the energy bands are doubly degenerate. Although the lowest conduction bands in these nanowires show good parabolic dispersions, the top valence bands showmore » rich and complex structures. In particular, the topmost valence bands of the nanowires with a square cross section show a double maximum structure. In the nanowires with a rectangular cross section, this double maximum structure is suppressed, and the top valence bands gradually develop into parabolic bands as the aspect ratio of the cross section is increased. For the [111]-oriented InSb and GaSb nanowires, the systems with hexagonal cross sections are considered. It is found that all the bands at the Γ-point are again doubly degenerate. However, some of them will split into non-degenerate bands when the wave vector moves away from the Γ-point. Although the lowest conduction bands again show good parabolic dispersions, the topmost valence bands do not show the double maximum structure. Instead, they show a single maximum structure with its maximum at a wave vector slightly away from the Γ-point. The wave functions of the band states near the band gaps of the [001]- and [111]-oriented InSb and GaSb nanowires are also calculated and are presented in terms of probability distributions in the cross sections. It is found that although the probability distributions of the band states in the [001]-oriented nanowires with a rectangular cross section could be qualitatively described by one-band effective mass theory, the probability distributions of the band states in the [001]-oriented nanowires with a square cross section and the [111]-oriented nanowires with a hexagonal cross section show characteristic patterns with symmetries closely related to the irreducible representations of the relevant double point groups and, in general, go beyond the prediction of a simple one-band effective mass theory. We also investigate the effects of quantum confinement on the band structures of the [001]- and [111]-oriented InSb and GaSb nanowires and present an empirical formula for the description of quantization energies of the band edge states in the nanowires, which could be used to estimate the enhancement of the band gaps of the nanowires as a result of quantum confinement. The size dependencies of the electron and hole effective masses in these nanowires are also investigated and discussed.« less

  3. Electronic structures of [001]- and [111]-oriented InSb and GaSb free-standing nanowires

    NASA Astrophysics Data System (ADS)

    Liao, Gaohua; Luo, Ning; Yang, Zhihu; Chen, Keqiu; Xu, H. Q.

    2015-09-01

    We report on a theoretical study of the electronic structures of InSb and GaSb nanowires oriented along the [001] and [111] crystallographic directions. The nanowires are described by atomistic, tight-binding models, including spin-orbit interaction. The band structures and the wave functions of the nanowires are calculated by means of a Lanczos iteration algorithm. For the [001]-oriented InSb and GaSb nanowires, the systems with both square and rectangular cross sections are considered. Here, it is found that all the energy bands are doubly degenerate. Although the lowest conduction bands in these nanowires show good parabolic dispersions, the top valence bands show rich and complex structures. In particular, the topmost valence bands of the nanowires with a square cross section show a double maximum structure. In the nanowires with a rectangular cross section, this double maximum structure is suppressed, and the top valence bands gradually develop into parabolic bands as the aspect ratio of the cross section is increased. For the [111]-oriented InSb and GaSb nanowires, the systems with hexagonal cross sections are considered. It is found that all the bands at the Γ-point are again doubly degenerate. However, some of them will split into non-degenerate bands when the wave vector moves away from the Γ-point. Although the lowest conduction bands again show good parabolic dispersions, the topmost valence bands do not show the double maximum structure. Instead, they show a single maximum structure with its maximum at a wave vector slightly away from the Γ-point. The wave functions of the band states near the band gaps of the [001]- and [111]-oriented InSb and GaSb nanowires are also calculated and are presented in terms of probability distributions in the cross sections. It is found that although the probability distributions of the band states in the [001]-oriented nanowires with a rectangular cross section could be qualitatively described by one-band effective mass theory, the probability distributions of the band states in the [001]-oriented nanowires with a square cross section and the [111]-oriented nanowires with a hexagonal cross section show characteristic patterns with symmetries closely related to the irreducible representations of the relevant double point groups and, in general, go beyond the prediction of a simple one-band effective mass theory. We also investigate the effects of quantum confinement on the band structures of the [001]- and [111]-oriented InSb and GaSb nanowires and present an empirical formula for the description of quantization energies of the band edge states in the nanowires, which could be used to estimate the enhancement of the band gaps of the nanowires as a result of quantum confinement. The size dependencies of the electron and hole effective masses in these nanowires are also investigated and discussed.

  4. Single crystal to polycrystal neutron transmission simulation

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Dessieux, Luc Lucius; Stoica, Alexandru Dan; Bingham, Philip R.

    A collection of routines for calculation of the total cross section that determines the attenuation of neutrons by crystalline solids is presented. The total cross section is calculated semi-empirically as a function of crystal structure, neutron energy, temperature, and crystal orientation. The semi-empirical formula includes the contribution of parasitic Bragg scattering to the total cross section using both the crystal’s mosaic spread value and its orientation with respect to the neutron beam direction as parameters. These routines allow users to enter a distribution of crystal orientations for calculation of total cross sections of user defined powder or pseudo powder distributions,more » which enables simulation of non-uniformities such as texture and strain. In conclusion, the spectra for neutron transmission simulations in the neutron thermal energy range (2 meV–100 meV) are presented for single crystal and polycrystal samples and compared to measurements.« less

  5. Single crystal to polycrystal neutron transmission simulation

    DOE PAGES

    Dessieux, Luc Lucius; Stoica, Alexandru Dan; Bingham, Philip R.

    2018-02-02

    A collection of routines for calculation of the total cross section that determines the attenuation of neutrons by crystalline solids is presented. The total cross section is calculated semi-empirically as a function of crystal structure, neutron energy, temperature, and crystal orientation. The semi-empirical formula includes the contribution of parasitic Bragg scattering to the total cross section using both the crystal’s mosaic spread value and its orientation with respect to the neutron beam direction as parameters. These routines allow users to enter a distribution of crystal orientations for calculation of total cross sections of user defined powder or pseudo powder distributions,more » which enables simulation of non-uniformities such as texture and strain. In conclusion, the spectra for neutron transmission simulations in the neutron thermal energy range (2 meV–100 meV) are presented for single crystal and polycrystal samples and compared to measurements.« less

  6. Pore cross-section area on predicting elastic properties of trabecular bovine bone for human implants.

    PubMed

    Maciel, Alfredo; Presbítero, Gerardo; Piña, Cristina; del Pilar Gutiérrez, María; Guzmán, José; Munguía, Nadia

    2015-01-01

    A clear understanding of the dependence of mechanical properties of bone remains a task not fully achieved. In order to estimate the mechanical properties in bones for implants, pore cross-section area, calcium content, and apparent density were measured in trabecular bone samples for human implants. Samples of fresh and defatted bone tissue, extracted from one year old bovines, were cut in longitudinal and transversal orientation of the trabeculae. Pore cross-section area was measured with an image analyzer. Compression tests were conducted into rectangular prisms. Elastic modulus presents a linear tendency as a function of pore cross-section area, calcium content and apparent density regardless of the trabecular orientation. The best variable to estimate elastic modulus of trabecular bone for implants was pore cross-section area, and affirmations to consider Nukbone process appropriated for marrow extraction in trabecular bone for implantation purposes are proposed, according to bone mechanical properties. Considering stress-strain curves, defatted bone is stiffer than fresh bone. Number of pores against pore cross-section area present an exponential decay, consistent for all the samples. These graphs also are useful to predict elastic properties of trabecular samples of young bovines for implants.

  7. On the connection between the Koppel-Young and the Nelkin Models for thermal neutron scattering in water molecules

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Markovic, M.I.

    1982-10-01

    A critical analysis of the Koppel-Young model is presented and compared with Nelkin's model and their equivalence is asserted. It is shown that the only distinction between the two models is in the orientational averaging of the rotational-vibrational intermedial scattering function. Based on total cross sections, the Krieger-Nelkin orientation averaging has been confirmed to give excellent agreement with the Koppel-Young orientation averaging. However, significant quasi-periodical differences are observed when calculating differential cross sections. As a result of these insights, a new unified model is proposed for microdynamics of water molecules.

  8. Electromagnetic wave extinction within a forested canopy

    NASA Technical Reports Server (NTRS)

    Karam, M. A.; Fung, A. K.

    1989-01-01

    A forested canopy is modeled by a collection of randomly oriented finite-length cylinders shaded by randomly oriented and distributed disk- or needle-shaped leaves. For a plane wave exciting the forested canopy, the extinction coefficient is formulated in terms of the extinction cross sections (ECSs) in the local frame of each forest component and the Eulerian angles of orientation (used to describe the orientation of each component). The ECSs in the local frame for the finite-length cylinders used to model the branches are obtained by using the forward-scattering theorem. ECSs in the local frame for the disk- and needle-shaped leaves are obtained by the summation of the absorption and scattering cross-sections. The behavior of the extinction coefficients with the incidence angle is investigated numerically for both deciduous and coniferous forest. The dependencies of the extinction coefficients on the orientation of the leaves are illustrated numerically.

  9. Adaptation of BAp crystal orientation to stress distribution in rat mandible during bone growth

    NASA Astrophysics Data System (ADS)

    Nakano, T.; Fujitani, W.; Ishimoto, T.; Umakoshi, Y.

    2009-05-01

    Biological apatite (BAp) c-axis orientation strongly depends on stress distribution in vivo and tends to align along the principal stress direction in bones. Dentulous mandible is subjected to a complicated stress condition in vivo during chewing but few studies have been carried out on the BAp c-axis orientation; so the adaptation of BAp crystal orientation to stress distribution was examined in rat dentulous mandible during bone growth and mastication. Female SD rats 4 to 14 weeks old were prepared, and the bone mineral density (BMD) and BAp crystal orientation were analyzed in a cross-section of mandible across the first molar focusing on two positions: separated from and just under the tooth root on the same cross-section perpendicular to the mesiodistal axis. The degree of BAp orientation was analyzed by a microbeam X-ray diffractometer using Cu-Kα radiation equipped with a detector of curved one-dimensional PSPC and two-dimensional PSPC in the reflection and transmission optics, respectively. BMD quickly increased during bone growth up to 14 weeks, although it was independent of the position from the tooth root. In contrast, BAp crystal orientation strongly depended on the age and the position from the tooth root, even in the same cross-section and direction, especially along the mesiodistal and the biting axes. With increased biting stress during bone growth, the degree of BAp orientation increased along the mesiodistal axis in a position separated from the tooth root more than that near the tooth root. In contrast, BAp preferential alignment clearly appeared along the biting axis near the tooth root. We conclude that BAp orientation rather than BMD sensitively adapts to local stress distribution, especially from the chewing stress in vivo in the mandible.

  10. Impacts of fiber orientation and milling on observed crystallinity in jack pine

    Treesearch

    Umesh P. Agarwal; Sally A. Ralph; Richard S. Reiner; Roderquita K. Moore; Carlos Baez

    2014-01-01

    Influences of fiber orientation and milling on wood cellulose crystallinity were studied using jack pine wood. The fiber orientation effects were measured by sampling rectangular wood blocks in radial, tangential, and cross-sectional orientations. The influence of milling was studied by analyzing the unsieved and sieved milled wood fractions (all

  11. Electronic Structures of Free-Standing Nanowires made from Indirect Bandgap Semiconductor Gallium Phosphide

    PubMed Central

    Liao, Gaohua; Luo, Ning; Chen, Ke-Qiu; Xu, H. Q.

    2016-01-01

    We present a theoretical study of the electronic structures of freestanding nanowires made from gallium phosphide (GaP)—a III-V semiconductor with an indirect bulk bandgap. We consider [001]-oriented GaP nanowires with square and rectangular cross sections, and [111]-oriented GaP nanowires with hexagonal cross sections. Based on tight binding models, both the band structures and wave functions of the nanowires are calculated. For the [001]-oriented GaP nanowires, the bands show anti-crossing structures, while the bands of the [111]-oriented nanowires display crossing structures. Two minima are observed in the conduction bands, while the maximum of the valence bands is always at the Γ-point. Using double group theory, we analyze the symmetry properties of the lowest conduction band states and highest valence band states of GaP nanowires with different sizes and directions. The band state wave functions of the lowest conduction bands and the highest valence bands of the nanowires are evaluated by spatial probability distributions. For practical use, we fit the confinement energies of the electrons and holes in the nanowires to obtain an empirical formula. PMID:27307081

  12. Perfectionism and Achievement Goal Orientations in Adolescent School Students

    ERIC Educational Resources Information Center

    Damian, Lavinia E.; Stoeber, Joachim; Negru, Oana; Baban, Adriana

    2014-01-01

    Perfectionism has been shown to predict individual differences in achievement goal orientations in university students, but research on perfectionism and goal orientations in school students is still very limited. Investigating 584 adolescent school students in a cross-sectional correlational design, the present study examined how self-oriented…

  13. Visual completion from 2D cross-sections: Implications for visual theory and STEM education and practice.

    PubMed

    Gagnier, Kristin Michod; Shipley, Thomas F

    2016-01-01

    Accurately inferring three-dimensional (3D) structure from only a cross-section through that structure is not possible. However, many observers seem to be unaware of this fact. We present evidence for a 3D amodal completion process that may explain this phenomenon and provide new insights into how the perceptual system processes 3D structures. Across four experiments, observers viewed cross-sections of common objects and reported whether regions visible on the surface extended into the object. If they reported that the region extended, they were asked to indicate the orientation of extension or that the 3D shape was unknowable from the cross-section. Across Experiments 1, 2, and 3, participants frequently inferred 3D forms from surface views, showing a specific prior to report that regions in the cross-section extend straight back into the object, with little variance in orientation. In Experiment 3, we examined whether 3D visual inferences made from cross-sections are similar to other cases of amodal completion by examining how the inferences were influenced by observers' knowledge of the objects. Finally, in Experiment 4, we demonstrate that these systematic visual inferences are unlikely to result from demand characteristics or response biases. We argue that these 3D visual inferences have been largely unrecognized by the perception community, and have implications for models of 3D visual completion and science education.

  14. Maximum likelihood orientation estimation of 1-D patterns in Laguerre-Gauss subspaces.

    PubMed

    Di Claudio, Elio D; Jacovitti, Giovanni; Laurenti, Alberto

    2010-05-01

    A method for measuring the orientation of linear (1-D) patterns, based on a local expansion with Laguerre-Gauss circular harmonic (LG-CH) functions, is presented. It lies on the property that the polar separable LG-CH functions span the same space as the 2-D Cartesian separable Hermite-Gauss (2-D HG) functions. Exploiting the simple steerability of the LG-CH functions and the peculiar block-linear relationship among the two expansion coefficients sets, maximum likelihood (ML) estimates of orientation and cross section parameters of 1-D patterns are obtained projecting them in a proper subspace of the 2-D HG family. It is shown in this paper that the conditional ML solution, derived by elimination of the cross section parameters, surprisingly yields the same asymptotic accuracy as the ML solution for known cross section parameters. The accuracy of the conditional ML estimator is compared to the one of state of art solutions on a theoretical basis and via simulation trials. A thorough proof of the key relationship between the LG-CH and the 2-D HG expansions is also provided.

  15. Catalyst shape engineering for anisotropic cross-sectioned nanowire growth

    NASA Astrophysics Data System (ADS)

    Calahorra, Yonatan; Kelrich, Alexander; Cohen, Shimon; Ritter, Dan

    2017-01-01

    The ability to engineer material properties at the nanoscale is a crucial prerequisite for nanotechnology. Hereunder, we suggest and demonstrate a novel approach to realize non-hemispherically shaped nanowire catalysts, subsequently used to grow InP nanowires with a cross section anisotropy ratio of up to 1:1.8. Gold was deposited inside high aspect ratio nanotrenches in a 5 nm thick SiNx selective area mask; inside the growth chamber, upon heating to 455 °C, the thin gold stripes agglomerated, resulting in an ellipsoidal dome (hemiellipsoid). The initial shape of the catalyst was preserved during growth to realize asymmetrically cross-sectioned nanowires. Moreover, the crystalline nature of the nanowire side facets was found to depend on the nano-trench orientation atop the substrate, resulting in hexagonal or octagonal cross-sections when the nano-trenches are aligned or misaligned with the [1¯10] orientation atop a [111]B substrate. These results establish the role of catalyst shape as a unique tool to engineer nanowire growth, potentially allowing further control over its physical properties.

  16. Three-dimensional cardiac architecture determined by two-photon microtomy

    NASA Astrophysics Data System (ADS)

    Huang, Hayden; MacGillivray, Catherine; Kwon, Hyuk-Sang; Lammerding, Jan; Robbins, Jeffrey; Lee, Richard T.; So, Peter

    2009-07-01

    Cardiac architecture is inherently three-dimensional, yet most characterizations rely on two-dimensional histological slices or dissociated cells, which remove the native geometry of the heart. We previously developed a method for labeling intact heart sections without dissociation and imaging large volumes while preserving their three-dimensional structure. We further refine this method to permit quantitative analysis of imaged sections. After data acquisition, these sections are assembled using image-processing tools, and qualitative and quantitative information is extracted. By examining the reconstructed cardiac blocks, one can observe end-to-end adjacent cardiac myocytes (cardiac strands) changing cross-sectional geometries, merging and separating from other strands. Quantitatively, representative cross-sectional areas typically used for determining hypertrophy omit the three-dimensional component; we show that taking orientation into account can significantly alter the analysis. Using fast-Fourier transform analysis, we analyze the gross organization of cardiac strands in three dimensions. By characterizing cardiac structure in three dimensions, we are able to determine that the α crystallin mutation leads to hypertrophy with cross-sectional area increases, but not necessarily via changes in fiber orientation distribution.

  17. Indium hexagonal island as seed-layer to boost a-axis orientation of AlN thin films

    NASA Astrophysics Data System (ADS)

    Redjdal, N.; Salah, H.; Azzaz, M.; Menari, H.; Manseri, A.; Guedouar, B.; Garcia-Sanchez, A.; Chérif, S. M.

    2018-06-01

    Highly a-axis oriented aluminum nitride films have been grown on Indium coated (100) Si substrate by DC reactive magnetron sputtering. It is shown that In incorporated layer improve the extent of preferential growth along (100) axis and form dense AlN films with uniform surface and large grains, devoid of micro-cracks. As revealed by SEM cross section images, AlN structure consists of oriented columnar grains perpendicular to the Si surface, while AlN/In structure results in uniformely tilted column. SEM images also revealed the presence of In hexagonal islands persistent throughout the entire growth. Micro -Raman spectroscopy of the surface and the cross section of the AlN/In grown films evidenced their high degree of homogeneity and cristallinity.

  18. Gender role, sexual orientation and suicide risk.

    PubMed

    Fitzpatrick, Kathleen Kara; Euton, Stephanie J; Jones, Jamie N; Schmidt, Norman B

    2005-07-01

    There has been interest in the relationship between homosexuality, gender role and suicide risk. Though homosexuals are more likely to identify as cross-gender, research has not simultaneously examined sexual orientation and gender role in assessing suicide risk. In the current study, the unique and interactive effects of sexual orientation and gender role were assessed in regard to suicidal ideation, related psychopathology and measures of coping. 77 participants were recruited from an undergraduate psychology subject pool (n=47) or from gay, lesbian and transgender student organizations (n=30) and assessed on measures of gender role, homosexuality, and psychopathology. Consistent with expectations, cross-gender role (i.e., personality traits associated with the opposite sex) is a unique predictor of suicidal symptoms. Moreover, gender role accounted for more of the overall variance in suicidal symptoms, positive problem orientation, peer acceptance and support, than sexual orientation. After accounting for gender role, sexual orientation contributed little to the variance in suicidal symptoms, associated pathology and problem-solving deficits. There was no support for gender role by sexual orientation interaction effects. The cross-sectional nature of the data limits statements regarding causality. Cross-gendered individuals, regardless of sexual orientation, appear to have higher risk for suicidal symptoms. Researchers and clinicians should assess gender role in evaluations of youth samples.

  19. Comparison of Image Processing Techniques using Random Noise Radar

    DTIC Science & Technology

    2014-03-27

    detection UWB ultra-wideband EM electromagnetic CW continuous wave RCS radar cross section RFI radio frequency interference FFT fast Fourier transform...several factors including radar cross section (RCS), orientation, and material makeup. A single monostatic radar at some position collects only range and...Chapter 2 is to provide the theory behind noise radar and SAR imaging. Section 2.1 presents the basic concepts in transmitting and receiving random

  20. The orientation distribution of tunneling-related quantities

    NASA Astrophysics Data System (ADS)

    Seif, W. M.; Refaie, A. I.; Botros, M. M.

    2018-03-01

    In the nuclear tunneling processes involving deformed nuclei, most of the tunneling-related quantities depend on the relative orientations of the participating nuclei. In the presence of different multipole deformations, we study the variation of a few relevant quantities for the α-decay and the sub-barrier fusion processes, in an orientation degree of freedom. The knocking frequency and the penetration probability are evaluated within the Wentzel-Kramers-Brillouin approximation. The interaction potential is calculated with Skyrme-type nucleon-nucleon interaction. We found that the width of the potential pocket, the Coulomb barrier radius, the penetration probability, the α-decay width, and the fusion cross-section follow consistently the orientation-angle variation of the radius of the deformed nucleus. The orientation distribution patterns of the pocket width, the barrier radius, the logarithms of the penetrability, the decay width, and the fusion cross-section are found to be highly analogous to pattern of the deformed-nucleus radius. The curve patterns of the orientation angle distributions of the internal pocket depth, the Coulomb barrier height and width, as well as the knocking frequency simulate inversely the variation of the deformed nucleus radius. The predicted orientation behaviors will be of a special interest in predicting the optimum orientations for the tunneling processes.

  1. The Effect of Prism Orientation in the Indentation Testing of Human Molar Enamel

    PubMed Central

    Braly, A.; Darnell, L.A.; Mann, A.B.; Teaford, M.F.; Weihs, T.P.

    2007-01-01

    Recent nanoindentation studies have demonstrated that the hardness and Young's modulus of human molar enamel decreases by more than 50% on moving from the occlusal surface to the dentin-enamel junction on cross-sectional samples. Possible sources of these variations are changes in local chemistry, microstructure, and prism orientation. This study investigates the latter source by performing nanoindentation tests at two different orientations relative to the hydroxyapatite prisms: parallel and perpendicular. A single sample volume was tested in order to maintain a constant chemistry and microstructure. The resulting data show very small differences between the two orientations for both hardness and Young's modulus. The 1.5 to 3.0% difference is significantly less than the standard deviations found within the data set. Thus, the variations in hardness and Young's modulus on cross-sectional samples of human molar are attributed to changes in local chemistry (varying levels of mineralization, organic matter, and water content) and changes in microstructure (varying volume fractions of inorganic crystals and organic matrix). The impact of prism orientation on mechanical properties measured by nanoindentation appears to be minimal. PMID:17449008

  2. Cross-sectional structural parameters from densitometry

    NASA Technical Reports Server (NTRS)

    Cleek, Tammy M.; Whalen, Robert T.

    2002-01-01

    Bone densitometry has previously been used to obtain cross-sectional properties of bone from a single X-ray projection across the bone width. Using three unique projections, we have extended the method to obtain the principal area moments of inertia and orientations of the principal axes at each scan cross-section along the length of the scan. Various aluminum phantoms were used to examine scanner characteristics to develop the highest accuracy possible for in vitro non-invasive analysis of cross-sectional properties. Factors considered included X-ray photon energy, initial scan orientation, the angle spanned by the three scans (included angle), and I(min)/I(max) ratios. Principal moments of inertia were accurate to within +/-3.1% and principal angles were within +/-1 degrees of the expected value for phantoms scanned with included angles of 60 degrees and 90 degrees at the higher X-ray photon energy (140 kVp). Low standard deviations in the error (0.68-1.84%) also indicate high precision of calculated measurements with these included angles. Accuracy and precision decreased slightly when the included angle was reduced to 30 degrees. The method was then successfully applied to a pair of excised cadaveric tibiae. The accuracy and insensitivity of the algorithms to cross-sectional shape and changing isotropy (I(min)/I(max)) values when various included angles are used make this technique viable for future in vivo studies.

  3. Gender differences in positive life orientation among the nursing home elders in China: A cross-sectional study.

    PubMed

    Jin, Cheng; Zheng, Zhibo; Xian, Wei; Bai, Ming; Jin, Liying; Li, Yuting; Yang, Xiufei; Sheng, Yang; Ai, Wensi; Liu, Hongbo

    2017-09-01

    Life orientation among the nursing home elders would differ from those of community-dwelling elders due to the different living environment, but may have greater differences in gender. This study was designed to investigate the positive life orientation and explore the potential risk factors including gender disparities among nursing home elders in China. This cross-sectional study was conducted in Northeast China. Two steps cluster sampling procedure were chosen. Basic activities of daily living (BADL) and instrumental activities of daily living (IADL) systems were used to estimate the functional status. Positive life orientation was measured using the six-question life orientation scale (LOS). 2512 nursing home elders were enrolled in the study. The mean age of the participants was 73.14±6.746years. Of the 1308 men and 1204 women, 14.9% had a positive life orientation in women and 16.1% in men. Higher level of education, independent in BADL and IADL were related to positive life orientation both in men and women. Age and BMI were also found to be significantly associated with positive life orientation in men (OR=0.587, 1.132, respectively). For women, the influence of income and vision on positive life orientation was also significant (OR=1.967, 1.926, respectively). The positive life orientation was higher in men than women. The gender-specific differences contribute to take more effective measures to improve the positive life orientation. Copyright © 2017 Elsevier B.V. All rights reserved.

  4. The radar cross section of dielectric disks

    NASA Technical Reports Server (NTRS)

    Levine, D. M.

    1982-01-01

    A solution is presented for the backscatter (nonstatic) radar cross section of dielectric disks of arbitrary shape, thickness and dielectric constant. The result is obtained by employing a Kirchhoff type approximation to obtain the fields inside the disk. The internal fields induce polarization and conduction currents from which the scattered fields and the radar cross section can be computed. The solution for the radar cross section obtained in this manner is shown to agree with known results in the special cases of normal incidence, thin disks and perfect conductivity. The solution can also be written as a product of the reflection coefficient of an identically oriented slab times the physical optics solution for the backscatter cross section of a perfectly conducting disk of the same shape. This result follows directly from the Kirchhoff type approximation without additional assumptions.

  5. Effect of Angle on Flow-Induced Vibrations of Pinniped Vibrissae

    PubMed Central

    Murphy, Christin T.; Eberhardt, William C.; Calhoun, Benton H.; Mann, Kenneth A.; Mann, David A.

    2013-01-01

    Two types of vibrissal surface structures, undulated and smooth, exist among pinnipeds. Most Phocidae have vibrissae with undulated surfaces, while Otariidae, Odobenidae, and a few phocid species possess vibrissae with smooth surfaces. Variations in cross-sectional profile and orientation of the vibrissae also exist between pinniped species. These factors may influence the way that the vibrissae behave when exposed to water flow. This study investigated the effect that vibrissal surface structure and orientation have on flow-induced vibrations of pinniped vibrissae. Laser vibrometry was used to record vibrations along the whisker shaft from the undulated vibrissae of harbor seals (Phoca vitulina) and northern elephant seals (Mirounga angustirostris) and the smooth vibrissae of California sea lions (Zalophus californianus). Vibrations along the whisker shaft were measured in a flume tank, at three orientations (0°, 45°, 90°) to the water flow. The results show that vibration frequency and velocity ranges were similar for both undulated and smooth vibrissae. Angle of orientation, rather than surface structure, had the greatest effect on flow-induced vibrations. Vibration velocity was up to 60 times higher when the wide, flat aspect of the whisker faced into the flow (90°), compared to when the thin edge faced into the flow (0°). Vibration frequency was also dependent on angle of orientation. Peak frequencies were measured up to 270 Hz and were highest at the 0° orientation for all whiskers. Furthermore, CT scanning was used to quantify the three-dimensional structure of pinniped vibrissae that may influence flow interactions. The CT data provide evidence that all vibrissae are flattened in cross-section to some extent and that differences exist in the orientation of this profile with respect to the major curvature of the hair shaft. These data support the hypothesis that a compressed cross-sectional profile may play a key role in reducing self-noise of the vibrissae. PMID:23922834

  6. Effect of growth ring orientation and placement of earlywood and latewood on MOE and MOR of very-small clear Douglas-fir beams.

    Treesearch

    Amy T. Grotta; Robert J. Leichti; Barbara L. Gartner; G.R. Johnson

    2005-01-01

    ASTM standard sizes for bending tests (either 50 x 50 mm or 25 x 25 mm in cross-section) are not always suitable for research purposes that characterize smaller sections of wood. Moreover, the ASTM standards specify loading the sample on the longitudinal-tangential surface. If specimens are small enough, then the effects of both growth-ring orientation and whether...

  7. Error Orientation and Reflection at Work

    ERIC Educational Resources Information Center

    Hetzner, Stefanie; Gartmeier, Martin; Heid, Helmut; Gruber, Hans

    2011-01-01

    Reflection on events at work, including errors is often as a means to learn effectively through work. In a cross-sectional field study in the banking sector, we investigated attitudes towards workplace errors (i.e. error orientation) as predictors of reflective activity. We assumed the organisational climate for psychological safety to have a…

  8. Stereodynamics in NO(X) + Ar inelastic collisions

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Brouard, M., E-mail: mark.brouard@chem.ox.ac.uk; Chadwick, H.; Gordon, S. D. S.

    2016-06-14

    The effect of orientation of the NO(X) bond axis prior to rotationally inelastic collisions with Ar has been investigated experimentally and theoretically. A modification to conventional velocity-map imaging ion optics is described, which allows the orientation of hexapole state-selected NO(X) using a static electric field, followed by velocity map imaging of the resonantly ionized scattered products. Bond orientation resolved differential cross sections are measured experimentally for a series of spin-orbit conserving transitions and compared with quantum mechanical calculations. The agreement between experimental results and those from quantum mechanical calculations is generally good. Parity pairs, which have previously been observed inmore » collisions of unpolarized NO with various rare gases, are not observed due to the coherent superposition of the two j = 1/2, Ω = 1/2 Λ-doublet levels in the orienting field. The normalized difference differential cross sections are found to depend predominantly on the final rotational state, and are not very sensitive to the final Λ-doublet level. The differential steric effect has also been investigated theoretically, by means of quantum mechanical and classical calculations. Classically, the differential steric effect can be understood by considering the steric requirement for different types of trajectories that contribute to different regions of the differential cross section. However, classical effects cannot account quantitatively for the differential steric asymmetry observed in NO(X) + Ar collisions, which reflects quantum interference from scattering at either end of the molecule. This quantum interference effect is dominated by the repulsive region of the potential.« less

  9. A clinically oriented comprehensive pictorial review of canine elbow anatomy.

    PubMed

    Constantinescu, Gheorghe M; Constantinescu, Ileana A

    2009-02-01

    The clinically oriented canine elbow anatomy in its complexity earned a high importance in surgery especially after multiple imaging modalities have been used in the benefit of diagnosis and treatment of canine elbow disorders. The bony, joint, and muscular structures, the arteries, the veins and the nerves supplying the elbow are described and illustrated in textbooks and atlases in the context of the comparative anatomy. Nevertheless, there is no publication focused on all of these structures described together from the skin to the bones in a systematic and topographic order, nor through cross and/or sagittal and coronal sections. The figures used in this article are original and drawn after dissection, cross, sagittal, and coronal sections of the elbow structures. The sections are correlated to the multiple imaging modalities shown in the next article.

  10. Three Dimensional Cross-Sectional Properties From Bone Densitometry

    NASA Technical Reports Server (NTRS)

    Cleek, Tammy M.; Whalen, Robert T.; Dalton, Bonnie P. (Technical Monitor)

    2001-01-01

    Bone densitometry has previously been used to obtain cross-sectional properties of bone in a single scan plane. Using three non-coplanar scans, we have extended the method to obtain the principal area Moments of inertia and orientations of the principal axes at each cross-section along the length of the scan. Various 5 aluminum phantoms were used to examine scanner characteristics to develop the highest accuracy possible for in vitro non-invasive analysis of mass distribution. Factors considered included X-ray photon energy, initial scan orientation, the included angle of the 3 scans, and Imin/Imax ratios. Principal moments of inertia were accurate to within 3.1% and principal angles were within 1 deg. of the expected value for phantoms scanned with included angles of 60 deg. and 90 deg. at the higher X-ray photon energy. Low standard deviations in error also 10 indicate high precision of calculated measurements with these included angles. Accuracy and precision decreased slightly when the included angle was reduced to 30 deg. The method was then successfully applied to a pair of excised cadaveric tibiae. The accuracy and insensitivity of the algorithms to cross-sectional shape and changing isotropy (Imin/Imax) values when various included angles are used make this technique viable for future in vivo studies.

  11. Sexual Orientation, Weight Concerns, and Eating-Disordered Behaviors in Adolescent Girls and Boys.

    ERIC Educational Resources Information Center

    Austin, S. Bryn; Ziyadeh, Najat; Kahn, Jessica A.; Camargo, Carlos A.; Colditz, Graham A.; Field, Alison E.

    2004-01-01

    Objective: To examine sexual orientation group differences in eating disorder symptoms in adolescent girls and boys. Method: Cross-sectional associations were examined using multivariate regression techniques using data gathered in 1999 from 10,583 adolescents in the Growing Up Today Study, a cohort of children of women participating in the…

  12. Burnout in emergency department healthcare professionals is associated with coping style: a cross-sectional survey.

    PubMed

    Howlett, M; Doody, K; Murray, J; LeBlanc-Duchin, D; Fraser, J; Atkinson, P R

    2015-09-01

    Ineffective coping may lead to impaired job performance and burnout, with adverse consequences to staff well-being and patient outcomes. We examined the relationship between coping styles and burnout in emergency physicians, nurses and support staff at seven small, medium and large emergency departments (ED) in a Canadian health region (population 500,000). Linear regression with the Coping Inventory for Stressful Situations (CISS) and Maslach Burnout Inventory (MBI) was used to evaluate the effect of coping style on levels of burnout in a cross-sectional survey of 616 ED staff members. CISS measures coping style in three categories: task-oriented, emotion-oriented and avoidance-oriented coping; MBI, in use for 30 years, assesses the level of burnout in healthcare workers. Task-oriented coping was associated with decreased risk of burnout, while emotion-oriented coping was associated with increased risk of burnout. Specific coping styles are associated with varied risk of burnout in ED staff across several different types of hospitals in a regional network. Coping style intervention may reduce burnout, while leading to improvement in staff well-being and patient outcomes. Further studies should focus on building and sustaining task-oriented coping, along with alternatives to emotion-oriented coping. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

  13. Cross-sectional scanning tunneling microscopy of antiphase boundaries in epitaxially grown GaP layers on Si(001)

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Prohl, Christopher; Lenz, Andrea, E-mail: alenz@physik.tu-berlin.de; Döscher, Henning

    2016-05-15

    In a fundamental cross-sectional scanning tunneling microscopy investigation on epitaxially grown GaP layers on a Si(001) substrate, differently oriented antiphase boundaries are studied. They can be identified by a specific contrast and by surface step edges starting/ending at the position of an antiphase boundary. Moreover, a change in the atomic position of P and Ga atoms along the direction of growth is observed in agreement with the structure model of antiphase boundaries in the GaP lattice. This investigation opens the perspective to reveal the orientation and position of the antiphase boundaries at the atomic scale due to the excellent surfacemore » sensitivity of this method.« less

  14. Attenuation of thermal neutrons by an imperfect single crystal

    NASA Astrophysics Data System (ADS)

    Naguib, K.; Adib, M.

    1996-06-01

    A semi-empirical formula is given which allows one to calculate the total thermal cross section of an imperfect single crystal as a function of crystal constants, temperature and neutron energy E, in the energy range between 3 meV and 10 eV. The formula also includes the contribution of the parasitic Bragg scattering to the total cross section that takes into account the crystal mosaic spread value and its orientation with respect to the neutron beam direction. A computer program (ISCANF) was developed to calculate the total attenuation of neutrons using the proposed formula. The ISCANF program was applied to investigate the neutron attenuation through a copper single crystal. The calculated values of the neutron transmission through the imperfect copper single crystal were fitted to the measured ones in the energy range 3 - 40 meV at different crystal orientations. The result of fitting shows that use of the computer program ISCANF allows one to predict the behaviour of the total cross section of an imperfect copper single crystal for the whole energy range.

  15. Mental visualization of objects from cross-sectional images

    PubMed Central

    Wu, Bing; Klatzky, Roberta L.; Stetten, George D.

    2011-01-01

    We extended the classic anorthoscopic viewing procedure to test a model of visualization of 3D structures from 2D cross-sections. Four experiments were conducted to examine key processes described in the model, localizing cross-sections within a common frame of reference and spatiotemporal integration of cross sections into a hierarchical object representation. Participants used a hand-held device to reveal a hidden object as a sequence of cross-sectional images. The process of localization was manipulated by contrasting two displays, in-situ vs. ex-situ, which differed in whether cross sections were presented at their source locations or displaced to a remote screen. The process of integration was manipulated by varying the structural complexity of target objects and their components. Experiments 1 and 2 demonstrated visualization of 2D and 3D line-segment objects and verified predictions about display and complexity effects. In Experiments 3 and 4, the visualized forms were familiar letters and numbers. Errors and orientation effects showed that displacing cross-sectional images to a remote display (ex-situ viewing) impeded the ability to determine spatial relationships among pattern components, a failure of integration at the object level. PMID:22217386

  16. Extracting Cross-Sectional Clinical Images Based on Their Principal Axes of Inertia

    PubMed Central

    Fan, Yuzhou; Djuric, Marija; Li, Zhiyu; Antonijevic, Djordje; Milenkovic, Petar; Sun, Yueyang; Li, Ruining

    2017-01-01

    Cross-sectional imaging is considered the gold standard in diagnosing a range of diseases. However, despite its widespread use in clinical practice and research, no widely accepted method is available to reliably match cross-sectional planes in several consecutive scans. This deficiency can impede comparison between cross-sectional images and ultimately lead to misdiagnosis. Here, we propose and demonstrate a method for finding the same imaging plane in images obtained during separate scanning sessions. Our method is based on the reconstruction of a “virtual organ” from which arbitrary cross-sectional images can be extracted, independent of the axis orientation in the original scan or cut; the key is to establish unique body coordinates of the organ from its principal axes of inertia. To verify our method a series of tests were performed, and the same cross-sectional plane was successfully extracted. This new approach offers clinicians access, after just a single scanning session, to the morphology and structure of a lesion through cross-sectional images reconstructed along arbitrary axes. It also aids comparable detection of morphological and structural changes in the same imaging plane from scans of the same patient taken at different times—thus potentially reducing the misdiagnosis rate when cross-sectional images are interpreted. PMID:29410714

  17. Extracting Cross-Sectional Clinical Images Based on Their Principal Axes of Inertia.

    PubMed

    Fan, Yuzhou; Luo, Liangping; Djuric, Marija; Li, Zhiyu; Antonijevic, Djordje; Milenkovic, Petar; Sun, Yueyang; Li, Ruining; Fan, Yifang

    2017-01-01

    Cross-sectional imaging is considered the gold standard in diagnosing a range of diseases. However, despite its widespread use in clinical practice and research, no widely accepted method is available to reliably match cross-sectional planes in several consecutive scans. This deficiency can impede comparison between cross-sectional images and ultimately lead to misdiagnosis. Here, we propose and demonstrate a method for finding the same imaging plane in images obtained during separate scanning sessions. Our method is based on the reconstruction of a "virtual organ" from which arbitrary cross-sectional images can be extracted, independent of the axis orientation in the original scan or cut; the key is to establish unique body coordinates of the organ from its principal axes of inertia. To verify our method a series of tests were performed, and the same cross-sectional plane was successfully extracted. This new approach offers clinicians access, after just a single scanning session, to the morphology and structure of a lesion through cross-sectional images reconstructed along arbitrary axes. It also aids comparable detection of morphological and structural changes in the same imaging plane from scans of the same patient taken at different times-thus potentially reducing the misdiagnosis rate when cross-sectional images are interpreted.

  18. Facet orientation and tropism: Associations with asymmetric lumbar paraspinal and psoas muscle parameters in patients with chronic low back pain.

    PubMed

    Xu, W B; Chen, S; Fan, S W; Zhao, F D; Yu, X J; Hu, Z J

    2016-08-10

    Many studies have explored the relationship between facet tropism and facet joint osteoarthritis, disc degeneration and degenerative spondylolisthesis. However, the associations between facet orientation and tropism, and paraspinal muscles have not been studied. To analyze the associations between facet orientation and tropism, and parameters of paraspinal muscles in patients with chronic low back pain. Ninety-five patients with chronic low back pain were consecutively enrolled. Their facet joint angles were measured on computed tomography (CT) while gross cross-sectional area (GCSA), functional cross-sectional area (FCSA) and T2 signal intensity of lumbar paraspinal and psoas muscle were evaluated on magnetic resonance imaging (MRI). The GCSA and FCSA were significantly smaller for multifidus muscle (P< 0.001), but significantly larger for erector spinae and psoas muscles (P< 0.001), in coronally-orientated group than those in sagittally-orientated group. The differences of bilateral GCSA and FCSA of multifidus muscle were significantly larger in facet tropism group than those in no facet tropism group (P= 0.009 and P= 0.019). Muscular asymmetries may develop in the lumbar region of the spine, which are associated with facet asymmetry in patients with chronic low back pain. Longitudinal studies are needed to understand the causal relationship between facet orientation and tropism and muscular asymmetry in future.

  19. The Influence of Pulsed Electroplating Frequency and Duty Cycle on Copper Film Microstructure and Stress State

    PubMed Central

    Marro, James B.; Darroudi, Taghi; Okoro, Chukwudi A.; Obeng, Yaw S.; Richardson, Kathleen C.

    2017-01-01

    In this work we studied the impact of pulse electroplating parameters on the cross-sectional and surface microstructures of blanket copper films using electron backscattering diffraction and x-ray diffraction. The films evaluated were highly (111) textured in the direction perpendicular to the film surface. The degree of preferential orientation was found to decrease with longer pulse on-times, due to strain energy driven growth of other grain orientations. Residual biaxial stresses were also measured in the films and higher pulse frequencies during deposition led to smaller biaxial stresses in the films. Film stress was also found to correlate with the amount of twinning in the copper film cross-sections. This has been attributed to the twins’ thermal stability and mechanical properties. PMID:28239200

  20. Fast calculation of the light differential scattering cross section of optically soft and convex bodies

    NASA Astrophysics Data System (ADS)

    Gruy, Frédéric

    2014-02-01

    Depending on the range of size and the refractive index value, an optically soft particle follows Rayleigh-Debye-Gans or RDG approximation or Van de Hulst approximation. Practically the first one is valid for small particles whereas the second one works for large particles. Klett and Sutherland (Klett JD, Sutherland RA. App. Opt. 1992;31:373) proved that the Wentzel-Kramers-Brillouin or WKB approximation leads to accurate values of the differential scattering cross section of sphere and cylinder over a wide range of size. In this paper we extend the work of Klett and Sutherland by proposing a method allowing a fast calculation of the differential scattering cross section for any shape of particle with a given orientation and illuminated by unpolarized light. Our method is based on a geometrical approximation of the particle by replacing each geometrical cross section by an ellipse and then by exactly evaluating the differential scattering cross section of the newly generated body. The latter one contains only two single integrals.

  1. Superconducting magnetic coil

    DOEpatents

    Aized, Dawood; Schwall, Robert E.

    1999-06-22

    A superconducting magnetic coil includes a plurality of sections positioned axially along the longitudinal axis of the coil, each section being formed of an anisotropic high temperature superconductor material wound about a longitudinal axis of the coil and having an associated critical current value that is dependent on the orientation of the magnetic field of the coil. The cross section of the superconductor, or the type of superconductor material, at sections along the axial and radial axes of the coil are changed to provide an increased critical current at those regions where the magnetic field is oriented more perpendicularly to the conductor plane, to thereby increase the critical current at these regions and to maintain an overall higher critical current of the coil.

  2. Superconducting magnetic coil

    DOEpatents

    Aized, Dawood; Schwall, Robert E.

    1996-06-11

    A superconducting magnetic coil includes a plurality of sections positioned axially along the longitudinal axis of the coil, each section being formed of an anisotropic high temperature superconductor material wound about a longitudinal axis of the coil and having an associated critical current value that is dependent on the orientation of the magnetic field of the coil. The cross section of the superconductor, or the type of superconductor material, at sections along the axial and radial axes of the coil are changed to provide an increased critical current at those regions where the magnetic field is oriented more perpendicularly to the conductor plane, to thereby increase the critical current at these regions and to maintain an overall higher critical current of the coil.

  3. Contraction-free, fume-fixed longitudinal sections of fresh frozen muscle

    NASA Technical Reports Server (NTRS)

    Riley, Danny A.; Slocum, Glenn R.

    1988-01-01

    Contraction damage occurring when longitudinal frozen sections of fresh unfixed muscles are thawed on microscope slides has limited histological examination of this tissue mainly to cross sections. Longitudinally oriented sections are advantageous for investigating properties that vary along the length of the muscle fibers. A fume fixation technique has been developed for preventing contraction of thick longitudinal frozen sections. The technique is compatible with histochemical staining of enzymes.

  4. Social Workers' Orientations toward the Evidence-Based Practice Process: A Comparison with Psychologists and Licensed Marriage and Family Therapists

    ERIC Educational Resources Information Center

    Parrish, Danielle E.; Rubin, Allen

    2012-01-01

    This article describes the results from a large, cross-sectional survey of social workers, psychologists, and licensed marriage and family therapists (LMFTs) in Texas (N = 865) regarding their orientation toward and implementation of evidence-based practice (EBP). All social workers were recruited by e-mail using the state NASW Listserv (analysis…

  5. Latino Adolescents' Mental Health: Exploring the Interrelations among Discrimination, Ethnic Identity, Cultural Orientation, Self-Esteem, and Depressive Symptoms

    ERIC Educational Resources Information Center

    Umana-Taylor, Adriana J.; Updegraff, Kimberly A.

    2007-01-01

    Guided by a risk and resilience framework, the current study used cross-sectional data to examine the degree to which Latino adolescents' (N=274; M age=16.3; 47.1% female) self-esteem, ethnic identity, and cultural orientations mediated or moderated the relation between perceived discrimination and depressive symptoms. Utilizing a multiple group…

  6. Embodying pervasive discrimination: a decomposition of sexual orientation inequalities in health in a population-based cross-sectional study in Northern Sweden.

    PubMed

    Gustafsson, Per E; Linander, Ida; Mosquera, Paola A

    2017-01-21

    Studies from Sweden and abroad have established health inequalities between heterosexual and non-heterosexual people. Few studies have examined the underpinnings of such sexual orientation inequalities in health. To expand this literature, the present study aimed to employ decomposition analysis to explain health inequalities between people with heterosexual and non-heterosexual orientation in Sweden, a country with an international reputation for heeding the human rights of non-heterosexual people. Participants (N = 23,446) came from a population-based cross-sectional survey in the four northernmost counties in Sweden in 2014. Participants completed self-administered questionnaires, covering sexual orientation, mental and general physical health, social conditions and unmet health care needs, and sociodemographic data was retrieved from total population registers. Sexual orientation inequalities in health were decomposed by Blinder-Oaxaca decomposition analysis. Results showed noticeable mental and general health inequalities between heterosexual and non-heterosexual orientation groups. Health inequalities were partly explained (total explained fraction 64-74%) by inequalities in degrading treatment (24-26% of the explained fraction), but to a considerable degree also by material conditions (38-45%) and unmet care needs (25-43%). Psychosocial experiences may be insufficient to explain and understand health inequalities by sexual orientation in a reputedly 'gay-friendly' setting. Less overt forms of structural discrimination may need to be considered to capture the pervasive material discrimination that seems to underpin the embodiment of sexual minority inequalities. This ought to be taken into consideration in research, policy-making and monitoring aiming to work towards equity in health across sexual orientations.

  7. Multidimensional Sexual Perfectionism and Female Sexual Function: A Longitudinal Investigation.

    PubMed

    Stoeber, Joachim; Harvey, Laura N

    2016-11-01

    Research on multidimensional sexual perfectionism differentiates four forms: self-oriented, partner-oriented, partner-prescribed, and socially prescribed. Self-oriented sexual perfectionism reflects perfectionistic standards people apply to themselves as sexual partners; partner-oriented sexual perfectionism reflects perfectionistic standards people apply to their sexual partner; partner-prescribed sexual perfectionism reflects people's beliefs that their sexual partner imposes perfectionistic standards on them; and socially prescribed sexual perfectionism reflects people's beliefs that society imposes such standards on them. Previous studies found partner-prescribed and socially prescribed sexual perfectionism to be maladaptive forms of sexual perfectionism associated with a negative sexual self-concept and problematic sexual behaviors, but only examined cross-sectional relationships. The present article presents the first longitudinal study examining whether multidimensional sexual perfectionism predicts changes in sexual self-concept and sexual function over time. A total of 366 women aged 17-69 years completed measures of multidimensional sexual perfectionism, sexual esteem, sexual anxiety, sexual problem self-blame, and sexual function (cross-sectional data). Three to six months later, 164 of the women completed the same measures again (longitudinal data). Across analyses, partner-prescribed sexual perfectionism emerged as the most maladaptive form of sexual perfectionism. In the cross-sectional data, partner-prescribed sexual perfectionism showed positive relationships with sexual anxiety, sexual problem self-blame, and intercourse pain, and negative relationships with sexual esteem, desire, arousal, lubrication, and orgasmic function. In the longitudinal data, partner-prescribed sexual perfectionism predicted increases in sexual anxiety and decreases in sexual esteem, arousal, and lubrication over time. The findings suggest that partner-prescribed sexual perfectionism contributes to women's negative sexual self-concept and female sexual dysfunction.

  8. Moderating effect of nurses' customer-oriented perception between organizational citizenship behaviors and satisfaction.

    PubMed

    Chang, Ching Sheng; Chang, Hae Ching

    2010-08-01

    This study investigates whether organizational citizenship behaviors enhance job satisfaction among nursing personnel, while exploring whether customer-oriented perception has a moderating effect between nursing personnel's organizational citizenship behaviors and job satisfaction.The authors used a cross-sectional survey sent to 500 nurses with 232 valid responses. According to the research findings, nurses' organizational citizenship behaviors have a positive and significant influence on job satisfaction. Results also indicated that the moderating effect of nurses' customer-oriented perception on the relationship between their organizational citizenship behaviors and job satisfaction was stronger for high customer-oriented perception than it was low customer-oriented perception.

  9. FORTRAN 4 programs for the extraction of potential well parameters from the energy dependence of total elastic scattering cross sections

    NASA Technical Reports Server (NTRS)

    Labudde, R. A.

    1972-01-01

    An attempt has been made to keep the programs as subroutine oriented as possible. Usually only the main programs are directly concerned with the problem of total cross sections. In particular the subroutines POLFIT, BILINR, GASS59/MAXLIK, SYMOR, MATIN, STUDNT, DNTERP, DIFTAB, FORDIF, EPSALG, REGFAL and ADSIMP are completely general, and are concerned only with the problems of numerical analysis and statistics. Each subroutine is independently documented.

  10. Observed and Simulated Temporal and Spatial Variations of Gap Outflow Region

    DTIC Science & Technology

    2006-09-01

    5 Figure 3. (a) Cross section plot of potential temperature (every 2oK) and horizontal wind along line AB. The orientation of cross section AB is...c)18Z, and (d) 21Z. The length of the wind vector is proportional to its magnitude. The yellow lines indicate the leading edge identified from...a) 12Z February 26 2004 and (b) 00Z February 27 2004. The black transverse lines indicate the position of the low level flight passes by the

  11. Surgical tool alignment guidance by drawing two cross-sectional laser-beam planes.

    PubMed

    Nakajima, Yoshikazu; Dohi, Takeyoshi; Sasama, Toshihiko; Momoi, Yasuyuki; Sugano, Nobuhiko; Tamura, Yuichi; Lim, Sung-hwan; Sakuma, Ichiro; Mitsuishi, Mamoru; Koyama, Tsuyoshi; Yonenobu, Kazuo; Ohashi, Satoru; Bessho, Masahiko; Ohnishi, Isao

    2013-06-01

    Conventional surgical navigation requires for surgeons to move their sight and conscious off the surgical field when checking surgical tool's positions shown on the display panel. Since that takes high risks of surgical exposure possibilities to the patient's body, we propose a novel method for guiding surgical tool position and orientation directly in the surgical field by a laser beam. In our navigation procedure, two cross-sectional planar laser beams are emitted from the two laser devices attached onto both sides of an optical localizer, and show surgical tool's entry position on the patient's body surface and its orientation on the side face of the surgical tool. In the experiments, our method gave the surgeons precise and accurate surgical tool adjusting and showed the feasibility to apply to both of open and percutaneous surgeries.

  12. Three dimensional X-ray Diffraction Contrast Tomography Reconstruction of Polycrystalline Strontium Titanate during Sintering and Electron Backscatter Diffraction Validation

    NASA Astrophysics Data System (ADS)

    Syha, M.; Rheinheimer, W.; Loedermann, B.; Graff, A.; Trenkle, A.; Baeurer, M.; Weygand, D.; Ludwig, W.; Gumbsch, P.

    The microstructural evolution of polycrystalline strontium titanate was investigated in three dimensions (3D) using X-ray diffraction contrast tomography (DCT) before and after ex-situ annealing at 1600°C. Post-annealing, the specimen was additionally subjected to phase contrast tomography (PCT) in order to finely resolve the porosities. The resulting microstructure reconstructions were studied with special emphasis on morphology and interface orientation during microstructure evolution. Subsequently, cross-sections of the specimen were studied using electron backscatter diffraction (EBSD). Corresponding cross-sections through the 3D reconstruction were identified and the quality of the reconstruction is validated with special emphasis on the spatial resolution at the grain boundaries, the size and location of pores contained in the material and the accuracy of the orientation determination.

  13. Transcranial current stimulation focality using disc and ring electrode configurations: FEM analysis

    NASA Astrophysics Data System (ADS)

    Datta, Abhishek; Elwassif, Maged; Battaglia, Fortunato; Bikson, Marom

    2008-06-01

    We calculated the electric fields induced in the brain during transcranial current stimulation (TCS) using a finite-element concentric spheres human head model. A range of disc electrode configurations were simulated: (1) distant-bipolar; (2) adjacent-bipolar; (3) tripolar; and three ring designs, (4) belt, (5) concentric ring, and (6) double concentric ring. We compared the focality of each configuration targeting cortical structures oriented normal to the surface ('surface-radial' and 'cross-section radial'), cortical structures oriented along the brain surface ('surface-tangential' and 'cross-section tangential') and non-oriented cortical surface structures ('surface-magnitude' and 'cross-section magnitude'). For surface-radial fields, we further considered the 'polarity' of modulation (e.g. superficial cortical neuron soma hyper/depolarizing). The distant-bipolar configuration, which is comparable with commonly used TCS protocols, resulted in diffuse (un-focal) modulation with bi-directional radial modulation under each electrode and tangential modulation between electrodes. Increasing the proximity of the two electrodes (adjacent-bipolar electrode configuration) increased focality, at the cost of more surface current. At similar electrode distances, the tripolar-electrodes configuration produced comparable peak focality, but reduced radial bi-directionality. The concentric-ring configuration resulted in the highest spatial focality and uni-directional radial modulation, at the expense of increased total surface current. Changing ring dimensions, or use of two concentric rings, allow titration of this balance. The concentric-ring design may thus provide an optimized configuration for targeted modulation of superficial cortical neurons.

  14. Applications and Engineering Analysis of Lotus Roots under External Water Pressure

    PubMed Central

    Wang, Chang Jiang; Mynors, Diane

    2016-01-01

    Engineers can learn from nature for inspirations to create new designs. The internal structure of lotus roots with several oval holes was studied in this paper for engineering inspirations. The structural performance of lotus roots under outside water pressure was simulated and compared with various cross-sectional areas. The distribution of stresses in the cross-sectional area of lotus roots was analysed and presented. It was found that the maximum compressive stresses in the cross-sectional area of lotus roots were occurring at the long axis ends of the holes. This was very different from that of circular holes. Further analysis on the triaxiality factors revealed that the cross-sectional area of the lotus root resulted in large areas of high triaxiality factors. The resulting hydrostatic stress in the cross-sectional area of lotus root ranges from zero to 2.7 times the applied outside pressure. In contrast, the hydrostatic stress in a cylindrical cross-sectional area is a fixed value. The study showed that the lotus root and the orientation of the oval holes could be mimicked in the design of new structures, for example, underwater pipes and vessels. PMID:28127228

  15. Major Replicated Dimensions of Adjustment and Achievement: Cross-Cultural, Cross-Sectional and Longitudinal Research.

    ERIC Educational Resources Information Center

    Schaefer, Earl S.

    This paper reports the development of a Classroom Behavior Inventory and a series of studies which have developed and refined methods for collecting teacher ratings of children's social, emotional and task-oriented behavior from preschool through high school. Findings suggest that the Classroom Behavior Inventory is a relatively economical,…

  16. Superconducting magnetic coil

    DOEpatents

    Aized, D.; Schwall, R.E.

    1999-06-22

    A superconducting magnetic coil includes a plurality of sections positioned axially along the longitudinal axis of the coil, each section being formed of an anisotropic high temperature superconductor material wound about a longitudinal axis of the coil and having an associated critical current value that is dependent on the orientation of the magnetic field of the coil. The cross section of the superconductor, or the type of superconductor material, at sections along the axial and radial axes of the coil are changed to provide an increased critical current at those regions where the magnetic field is oriented more perpendicularly to the conductor plane, to thereby increase the critical current at these regions and to maintain an overall higher critical current of the coil. 15 figs.

  17. Predicting factors of positive orientation and attitudes towards nursing: A quantitative cross-sectional study.

    PubMed

    Ten Hoeve, Yvonne; Castelein, Stynke; Jansen, Wiebren; Jansen, Gerard; Roodbol, Petrie

    2016-05-01

    Previous studies have identified various reasons for students to choose a career in nursing. Students at the start of their programme hold a great variety of images and perceptions of nursing which can affect their orientation and attitudes towards their future profession. This paper aims to examine nursing students' orientation and attitudes towards nursing at the beginning of their educational programme, and to explore predictors of positive orientation and attitudes. The study used a quantitative cross-sectional design. A survey was conducted among first-year nursing students at four nursing universities of applied sciences in the Netherlands. Questionnaires were administered to all students enrolled in a bachelor of nursing programme (n=1414) at these universities. Respondents completed a survey consisting of: 1) Nursing Orientation Tool, 2) Nursing Attitude Questionnaire, and 3) demographic data such as gender, living status, nursing experience, preliminary training, first-choice programme, and career choice. Kruskal Wallis tests, with post hoc Mann Whitney U tests, were used to compare group scores. Multiple regression was performed to investigate predictors of positive orientation and attitudes towards nursing. Students in this study sample (n=1244) strongly agreed with statements related to caring, nursing expertise, professional nursing knowledge and the application of this knowledge. Predictors of positive orientation and attitudes towards nursing include having nursing/caring experience, indicating nursing as the first choice for study, preliminary vocational training, and a desire to make a career in nursing. Data from this survey suggest a link between personal and environmental characteristics and motivations to select nursing as a career. Understanding which factors predict positive orientation and attitudes towards nursing could offer educators a tool in the recruitment and selection assessment of new students. Copyright © 2016 Elsevier Ltd. All rights reserved.

  18. Size and Shape of the Distant Magnetotail

    NASA Technical Reports Server (NTRS)

    Sibeck, D.G.; Lin, R.-Q.

    2014-01-01

    We employ a global magnetohydrodynamic model to study the effects of the interplanetary magnetic field (IMF) strength and direction upon the cross-section of the magnetotail at lunar distances. The anisotropic pressure of draped magnetosheath magnetic field lines and the inclusion of a reconnection-generated standing slow mode wave fan bounded by a rotational discontinuity within the definition of the magnetotail result in cross-sections elongated in the direction parallel to the component of the IMF in the plane perpendicular to the Sun-Earth line. Tilted cross-tail plasma sheets separate the northern and southern lobes within these cross-sections. Greater fast mode speeds perpendicular than parallel to the draped magnetos heath magnetic field lines result in greater distances to the bow shock in the direction perpendicular than parallel to the component of the IMF in the plane transverse to the Sun-Earth line. The magnetotail cross-section responds rapidly to reconnected magnetic field lines requires no more than the magnetosheath convection time to appear at any distance downstream, and further adjustments of the cross-section in response to the anisotropic pressures of the draped magnetic field lines require no more than 10-20 minutes. Consequently for typical ecliptic IMF orientations and strengths, the magnetotail cross-section is oblate while the bow shock is prolate.

  19. Internal marketing, customer orientation, and organizational commitment: moderating effects of work status.

    PubMed

    Huang, Meiju; Chen, Mei-Yen

    2013-08-01

    Associations among internal marketing, customer orientation, and organizational commitment were examined, particularly with regard to the moderating effects of work status on the relationships between internal marketing and customer orientation or organizational commitment, in a cross-sectional design with structural equation modeling. Two studies (Ns = 119 and 251) were conducted among full- and part-time service employees at Taipei Sports Centers. Internal marketing was associated with organizational commitment and customer orientation. Customer orientation was associated with organizational commitment and partially mediated the relation between internal marketing and organizational commitment. Furthermore, work status significantly moderated the relationships between internal marketing and customer orientation but not between internal marketing and organizational commitment. Implications and directions for future research were discussed.

  20. A conceptual model of nurses' goal orientation, service behavior, and service performance.

    PubMed

    Chien, Chun-Cheng; Chou, Hsin-Kai; Hung, Shuo-Tsung

    2008-01-01

    Based on the conceptual framework known as the "service triangle," the authors constructed a model of nurses' goal orientation, service behavior, and service performance to investigate the antecedents and consequences of the medical service behavior provided by nurses. This cross-sectional study collected data from 127 nurses in six hospitals using a mail-in questionnaire. Analysis of the model revealed that the customer-oriented behavior of nurses had a positive influence on organizational citizenship behavior; and both of these behaviors had a significant positive influence on service performance. The results also indicate that a higher learning goal orientation among nurses was associated with the performance of both observable customer-oriented behavior and organizational-citizenship behavior.

  1. Orientation-Dependent Displacement Sensor Using an Inner Cladding Fiber Bragg Grating.

    PubMed

    Yang, Tingting; Qiao, Xueguang; Rong, Qiangzhou; Bao, Weijia

    2016-09-11

    An orientation-dependent displacement sensor based on grating inscription over a fiber core and inner cladding has been demonstrated. The device comprises a short piece of multi-cladding fiber sandwiched between two standard single-mode fibers (SMFs). The grating structure is fabricated by a femtosecond laser side-illumination technique. Two well-defined resonances are achieved by the downstream both core and cladding fiber Bragg gratings (FBGs). The cladding resonance presents fiber bending dependence, together with a strong orientation dependence because of asymmetrical distribution of the "cladding" FBG along the fiber cross-section.

  2. Two-Dimensional Nonlinear Finite Element Analysis of CMC Microstructures

    NASA Technical Reports Server (NTRS)

    Mital, Subodh K.; Goldberg, Robert K.; Bonacuse, Peter J.

    2011-01-01

    Detailed two-dimensional finite element analyses of the cross-sections of a model CVI (chemical vapor infiltrated) SiC/SiC (silicon carbide fiber in a silicon carbide matrix) ceramic matrix composites are performed. High resolution images of the cross-section of this composite material are generated using serial sectioning of the test specimens. These images are then used to develop very detailed finite element models of the cross-sections using the public domain software OOF2 (Object Oriented Analysis of Material Microstructures). Examination of these images shows that these microstructures have significant variability and irregularity. How these variabilities manifest themselves in the variability in effective properties as well as the stress distribution, damage initiation and damage progression is the overall objective of this work. Results indicate that even though the macroscopic stress-strain behavior of various sections analyzed is very similar, each section has a very distinct damage pattern when subjected to in-plane tensile loads and this damage pattern seems to follow the unique architectural and microstructural details of the analyzed sections.

  3. Motivational maturity and helping behavior.

    PubMed

    Haymes, M; Green, L

    1977-12-01

    This study was undertaken to examine the independent influences of conative development (the Maslow needs hierarchy) upon behavioral aspects of prosocial orientations. It provides a behavioral demonstration of conative effects in a helping paradigm, among college-age men. A comparison of the conative data across the ages of 15-22 provided a cross-sectional view of conative development itself. Conative maturity was found to be predictive of greater helping among college-age men. Situational demands were demonstrated which tended to mask, but not override, these predispositional influences on helping. The cross-sectional data on conative development point to probable movement to early esteem concerns among high school men who have reached the conative level of love and belonging. On the other hand, the stability across the years of 15-22 of proportion of safety concerns suggests fixation of such concerns in those exhibiting them in high school. Results are discussed in terms of conative growth for development of prosocial orientations.

  4. Theoretical and Experimental Triple Differential Cross Sections for Electron Impact Ionization of SF6

    NASA Astrophysics Data System (ADS)

    Chaluvadi, Hari; Nixon, Kate; Murray, Andrew; Ning, Chuangang; Colgan, James; Madison, Don

    2014-10-01

    Experimental and theoretical Triply Differential Cross Sections (TDCS) will be presented for electron-impact ionization of sulfur hexafluoride (SF6) for the molecular orbital 1t1g. M3DW (molecular 3-body distorted wave) results will be compared with experiment for coplanar geometry and for perpendicular plane geometry (a plane which is perpendicular to the incident beam direction). In both cases, the final state electron energies and observation angles are symmetric and the final state electron energies range from 5 eV to 40 eV. It will be shown that there is a large difference between using the OAMO (orientation averaged molecular orbital) approximation and the proper average over all orientations and also that the proper averaged results are in much better agreement with experiment. Work supported by NSF under Grant Number PHY-1068237. Computational work was performed with Institutional resources made available through Los Alamos National Laboratory.

  5. Using Cross-Sectional Imaging to Convey Organ Relationships: An Integrated Learning Environment for Students of Gross Anatomy

    PubMed Central

    Forman, Bruce H.; Eccles, Randy; Piggins, Judith; Raila, Wayne; Estey, Greg; Barnett, G. Octo

    1990-01-01

    We have developed a visually oriented, computer-controlled learning environment designed for use by students of gross anatomy. The goals of this module are to reinforce the concepts of organ relationships and topography by using computed axial tomographic (CAT) images accessed from a videodisc integrated with color graphics and to introduce students to cross-sectional radiographic anatomy. We chose to build the program around CAT scan images because they not only provide excellent structural detail but also offer an anatomic orientation (transverse) that complements that used in the dissection laboratory (basically a layer-by-layer, anterior-to-posterior, or coronal approach). Our system, built using a Microsoft Windows-386 based authoring environment which we designed and implemented, integrates text, video images, and graphics into a single screen display. The program allows both user browsing of information, facilitated by hypertext links, and didactic sessions including mini-quizzes for self-assessment.

  6. Single ionization and capture cross sections from biological molecules by bare projectile impact*

    NASA Astrophysics Data System (ADS)

    Quinto, Michele A.; Monti, Juan M.; Montenegro, Pablo D.; Fojón, Omar A.; Champion, Christophe; Rivarola, Roberto D.

    2017-02-01

    We report calculations on single differential and total cross sections for single ionization and single electron capture from biological targets, namely, vapor water and DNA nucleobasese molecules, by bare projectile impact: H+, He2+, and C6+. They are performed within the Continuum Distorted Wave - Eikonal Initial State approximation and compared to several existing experimental data. This study is oriented to the obtention of a reliable set of theoretical data to be used as input in a Monte Carlo code destined to micro- and nano- dosimetry.

  7. Shaping the Development of Prejudice: Latent Growth Modeling of the Influence of Social Dominance Orientation on Outgroup Affect in Youth.

    PubMed

    Bratt, Christopher; Sidanius, Jim; Sheehy-Skeffington, Jennifer

    2016-12-01

    Social dominance orientation (SDO) has been theorized as a stable, early-emerging trait influencing outgroup evaluations, a view supported by evidence from cross-sectional and two-wave longitudinal research. Yet, the limitations of identifying causal paths with cross-sectional and two-wave designs are increasingly being acknowledged. This article presents the first use of multi-wave data to test the over-time relationship between SDO and outgroup affect among young people. We use cross-lagged and latent growth modeling (LGM) of a three-wave data set employing Norwegian adolescents (over 2 years, N = 453) and a five-wave data set with American university students (over 4 years, N = 748). Overall, SDO exhibits high temporal rank-order stability and predicts changes in outgroup affect. This research represents the strongest test to date of SDO's role as a stable trait that influences the development of prejudice, while highlighting LGM as a valuable tool for social and political psychology. © 2016 by the Society for Personality and Social Psychology, Inc.

  8. Differential compaction influences on structure in West Cameron Block 225 field

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Finley, W.R.

    The concept to be illustrated here is the influence on structural configuration of differential compaction caused by lateral variations in stratigraphy, specifically, changes from sand to shale within the same stratigraphic interval, The example chosen to illustrate this concept is West Cameron Block 225 field. As seen in structural stratigraphic cross sections as well as net sand maps constructed in the example field, several channel sands are seen to strongly influence the structural configuration. The basic structure within the field as defined by well and seismic data consists of a gentle, southerly dipping, north south-oriented ridge, bounded by a down-to-the-eastmore » fault on the west flank and a down-to-the-south fault to the north. Gentle roll into these faults closes the north flank of the structure. The stratigraphic section consists of alternating sands and shales of Miocene and Pliocene age. Several of these sands map out as linear sand bodies interpreted to be channels. These channels, representing thickened sand bodies that grade laterally into predominantly shale facies, are oriented in a general east-west direction. The juxtaposition of the basic structural orientation with the orientation of the channel sand(s) sets up a crossing point(s) on the southern flank of the structure. With the advent of differential compaction between the channel sands and the bounding shale faces, a stratigraphic structure is generated. This resulting compaction structure maps out as a double-lobed or saddled high. This effect is amplified as channels in the shallower section stack out over the southern flank of the structure until the southern crest dominates over the northern one. The overall result is one of migrating structural crests caused by variations in compactibility within the stratigraphic section.« less

  9. Nonlinear equations for dynamics of pretwisted beams undergoing small strains and large rotations

    NASA Technical Reports Server (NTRS)

    Hodges, D. H.

    1985-01-01

    Nonlinear beam kinematics are developed and applied to the dynamic analysis of a pretwisted, rotating beam element. The common practice of assuming moderate rotations caused by structural deformation in geometric nonlinear analyses of rotating beams was abandoned in the present analysis. The kinematic relations that described the orientation of the cross section during deformation are simplified by systematically ignoring the extensional strain compared to unity in those relations. Open cross section effects such as warping rigidity and dynamics are ignored, but other influences of warp are retained. The beam cross section is not allowed to deform in its own plane. Various means of implementation are discussed, including a finite element formulation. Numerical results obtained for nonlinear static problems show remarkable agreement with experiment.

  10. Correlative Magnetic Imaging of Heat-Assisted Magnetic Recording Media in Cross Section Using Lorentz TEM and MFM

    DOE PAGES

    Kim, Taeho Roy; Phatak, Charudatta; Petford-Long, Amanda K.; ...

    2017-10-23

    In order to increase the storage density of hard disk drives, a detailed understanding of the magnetic structure of the granular magnetic layer is essential. Here, we demonstrate an experimental procedure of imaging recorded bits on heat-assisted magnetic recording (HAMR) media in cross section using Lorentz transmission electron microscopy (TEM). With magnetic force microscopy and focused ion beam (FIB), we successfully targeted a single track to prepare cross-sectional TEM specimens. Then, we characterized the magnetic structure of bits with their precise location and orientation using Fresnel mode of Lorentz TEM. Here, this method can promote understanding of the correlation betweenmore » bits and their material structure in HAMR media to design better the magnetic layer.« less

  11. Correlative Magnetic Imaging of Heat-Assisted Magnetic Recording Media in Cross Section Using Lorentz TEM and MFM

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Kim, Taeho Roy; Phatak, Charudatta; Petford-Long, Amanda K.

    In order to increase the storage density of hard disk drives, a detailed understanding of the magnetic structure of the granular magnetic layer is essential. Here, we demonstrate an experimental procedure of imaging recorded bits on heat-assisted magnetic recording (HAMR) media in cross section using Lorentz transmission electron microscopy (TEM). With magnetic force microscopy and focused ion beam (FIB), we successfully targeted a single track to prepare cross-sectional TEM specimens. Then, we characterized the magnetic structure of bits with their precise location and orientation using Fresnel mode of Lorentz TEM. Here, this method can promote understanding of the correlation betweenmore » bits and their material structure in HAMR media to design better the magnetic layer.« less

  12. Study of Cold Fusion Reactions Using Collective Clusterization Approach

    NASA Astrophysics Data System (ADS)

    Kaur, Gurjit; Sandhu, Kirandeep; Sharma, Manoj K.

    2017-10-01

    Within the framework of the dynamical cluster decay model (DCM), the 1n evaporation cross-sections ({σ }1n) of cold fusion reactions (Pb and Bi targets) are calculated for {Z}{CN}=104-113 superheavy nuclei. The calculations are carried out in the fixed range of excitation energy {E}{CN}* =15+/- 1 {MeV}, so that the comparative analysis of reaction dynamics can be worked out. First of all, the fission barriers (B f ) and neutron separation energies ({S}1n) are estimated to account the decreasing cross-sections of cold fusion reactions. In addition to this, the importance of hot optimum orientations of β 2i-deformed nuclei over cold one is explored at fixed angular momentum and neck-length parameters. The hot optimum orientations support all the target-projectile (t,p) combinations, which are explored experimentally in the cold fusion reactions. Some new target-projectile combinations are also predicted for future exploration. Further, the 1n cross-sections are addressed for {Z}{CN}=104-113 superheavy nuclei at comparable excitation energies which show the decent agrement with experimental data upto {Z}{CN}=109 nuclei. Finally, to understand the dynamics of higher-Z superheavy nuclei, the cross-sections are also calculated at maximum available energies around the Coulomb barrier and the effect of non-sticking moment of inertia ({I}{NS}) is also investigated at these energies. Supported by the Council of Scientific and Industrial Research (CSIR), in the Form of Research Project Grant No. 03(1341)/15/EMR-II, and to DST, New Delhi, for INSPIRE-Fellowship Grant No. DST/INSPIRE/03/2015/000199

  13. Orientation-Dependent Displacement Sensor Using an Inner Cladding Fiber Bragg Grating

    PubMed Central

    Yang, Tingting; Qiao, Xueguang; Rong, Qiangzhou; Bao, Weijia

    2016-01-01

    An orientation-dependent displacement sensor based on grating inscription over a fiber core and inner cladding has been demonstrated. The device comprises a short piece of multi-cladding fiber sandwiched between two standard single-mode fibers (SMFs). The grating structure is fabricated by a femtosecond laser side-illumination technique. Two well-defined resonances are achieved by the downstream both core and cladding fiber Bragg gratings (FBGs). The cladding resonance presents fiber bending dependence, together with a strong orientation dependence because of asymmetrical distribution of the “cladding” FBG along the fiber cross-section. PMID:27626427

  14. Using Social Influence Theory to Increase the Effectiveness of Influence Operations

    DTIC Science & Technology

    2011-05-01

    Societies (London: Sage Publications, 2004), 138-139. 10 Lawrence Kohlberg , "The Development of Children’s Orientations Toward a Moral Order," Human...and Organizations, 260; House et al., The GLOBE Study, 313. 77 Kohlberg , "The Development of Children’s Orientations," 9. 78 Raven, "Kurt Lewin...Nisan and Lawrence Kohlberg , "Universality and Variation in Moral Judgment: A Longitudinal and Cross-Sectional Study in Turkey," Child Development 53

  15. Energy-selective Neutron Imaging for Three-dimensional Non-destructive Probing of Crystalline Structures

    NASA Astrophysics Data System (ADS)

    Peetermans, S.; Bopp, M.; Vontobel, P.; Lehmann, E. H.

    Common neutron imaging uses the full polychromatic neutron beam spectrum to reveal the material distribution in a non-destructive way. Performing it with a reduced energy band, i.e. energy-selective neutron imaging, allows access to local variation in sample crystallographic properties. Two sample categories can be discerned with different energy responses. Polycrystalline materials have an energy-dependent cross-section featuring Bragg edges. Energy-selective neutron imaging can be used to distinguish be- tween crystallographic phases, increase material sensitivity or penetration, improve quantification etc. An example of the latter is shown by the examination of copper discs prior to machining them into linear accelerator cavity structures. The cross-section of single crystals features distinct Bragg peaks. Based on their pattern, one can determine the orientation of the crystal, as in a Laue pattern, but with the tremendous advantage that the operation can be performed for each pixel, yielding crystal orientation maps at high spatial resolution. A wholly different method to investigate such samples is also introduced: neutron diffraction imaging. It is based on projections formed by neutrons diffracted from the crystal lattice out of the direct beam. The position of these projections on the detector gives information on the crystal orientation. The projection itself can be used to reconstruct the crystal shape. A three-dimensional mapping of local Bragg reflectivity or a grain orientation mapping can thus be obtained.

  16. A radiologic correlation with the basic functional neuroanatomy of the brain.

    PubMed

    Bilicka, Z; Liska, M; Bluska, P; Bilicky, J

    2014-01-01

    Primary cortical areas for motor, sensory and sensitive functions are localized in certain areas of the brain cortex. In clinical practice, cross sectional imaging (computer tomography and magnetic resonance) is wildy used for diagnostics purpose, treatment planning and follow up of the patients. Accurate orientation in brain structures is necessary for the evaluation of radiological images. There are numerable landmark signs, which can be used for precise identification of important brain structures. In this review article, the mostly used anatomical landmarks are described and shown on the cross sectional images (magnetic resonance imaging) (Fig. 14, Ref. 25).

  17. A nonlinear theory for spinning anisotropic beams using restrained warping functions

    NASA Technical Reports Server (NTRS)

    Ie, C. A.; Kosmatka, J. B.

    1993-01-01

    A geometrically nonlinear theory is developed for spinning anisotropic beams having arbitrary cross sections. An assumed displacement field is developed using the standard 3D kinematics relations to describe the global beam behavior supplemented with an additional field that represents the local deformation within the cross section and warping out of the cross section plane. It is assumed that the magnitude of this additional field is directly proportional to the local stress resultants. In order to take into account the effects of boundary conditions, a restraining function is introduced. This function plays the role of reducing the amount of free warping deformation throughout the field due to the restraint of the cross section(s) at the end(s) of the beam, e.g., in the case of a cantilever beam. Using a developed ordering scheme, the nonlinear strains are calculated to the third order. The FEM is developed using the weak form variational formulation. Preliminary interesting numerical results have been obtained that indicate the role of the restraining function in the case of a cantilever beam with circular cross section. These results are for the cases of a tip displacement (static) and free vibration studies for both isotropic and anisotropic materials with varied fiber orientations.

  18. AUTOGEN

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    2003-05-29

    AUTOGEN computes collision-free sequences of robot motion instructions to permit traversal of three-dimensional space curves. Order and direction of curve traversal and orientation of end effector are constraided by a set of manufacturing rules. Input can be provided as a collection of solid models or in terms of wireframe objects and structural cross-section definitions. Entity juxtaposition can be inferred, with appropriate structural features automatically provided. Process control is asserted as a function of position and orientation along each space curve, and is currently implemented for welding processes.

  19. Direct contact as a moderator of extended contact effects: cross-sectional and longitudinal impact on outgroup attitudes, behavioral intentions, and attitude certainty.

    PubMed

    Christ, Oliver; Hewstone, Miles; Tausch, Nicole; Wagner, Ulrich; Voci, Alberto; Hughes, Joanne; Cairns, Ed

    2010-12-01

    Cross-group friendships (the most effective form of direct contact) and extended contact (i.e., knowing ingroup members who have outgroup friends) constitute two of the most important means of improving outgroup attitudes. Using cross-sectional and longitudinal samples from different intergroup contexts, this research demonstrates that extended contact is most effective when individuals live in segregated neighborhoods having only few, or no, direct friendships with outgroup members. Moreover, by including measures of attitudes and behavioral intentions the authors showed the broader impact of these forms of contact, and, by assessing attitude certainty as one dimension of attitude strength, they tested whether extended contact can lead not only to more positive but also to stronger outgroup orientations. Cross-sectional data showed that direct contact was more strongly related to attitude certainty than was extended contact, but longitudinal data showed both forms of contact affected attitude certainty in the long run.

  20. Depolarization and Scattering of Electromagnetic Waves. Appendices.

    DTIC Science & Technology

    1986-06-30

    for both specular point scattering and Bragg scattering in a self-consistent manner is used to express the total cross section of the flake as a...by Arbitrarily Oriented Composite Rough Surfaces. In this work the full wave approach is used to determine the modu- lations of the like and cross...analyze multiple scattering using the equation of radiative transfer with the general Stokes’ parameters. Our ultimate goal is to develop codes which will

  1. Uncertainty quantification of fiber orientation distribution measurements for long-fiber-reinforced thermoplastic composites

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Sharma, Bhisham N.; Naragani, Diwakar; Nguyen, Ba Nghiep

    Here, we present a detailed methodology for experimental measurement of fiber orientation distribution in injection-molded discontinuous fiber composites using the method of ellipses on two-dimensional cross sections. Best practices to avoid biases occurring during surface preparation and optical imaging of carbon-fiber-reinforced thermoplastics are discussed. We developed a marker-based watershed transform routine for efficient image segmentation and the separation of touching fiber ellipses. The sensitivity of the averaged orientation tensor to the image sample size is studied for the case of long-fiber thermoplastics. A Mori–Tanaka implementation of the Eshelby model is then employed to quantify the sensitivity of elastic stiffness predictionsmore » to biases in the fiber orientation distribution measurements.« less

  2. Uncertainty quantification of fiber orientation distribution measurements for long-fiber-reinforced thermoplastic composites

    DOE PAGES

    Sharma, Bhisham N.; Naragani, Diwakar; Nguyen, Ba Nghiep; ...

    2017-09-28

    Here, we present a detailed methodology for experimental measurement of fiber orientation distribution in injection-molded discontinuous fiber composites using the method of ellipses on two-dimensional cross sections. Best practices to avoid biases occurring during surface preparation and optical imaging of carbon-fiber-reinforced thermoplastics are discussed. We developed a marker-based watershed transform routine for efficient image segmentation and the separation of touching fiber ellipses. The sensitivity of the averaged orientation tensor to the image sample size is studied for the case of long-fiber thermoplastics. A Mori–Tanaka implementation of the Eshelby model is then employed to quantify the sensitivity of elastic stiffness predictionsmore » to biases in the fiber orientation distribution measurements.« less

  3. A critical examination of the construct of perfectionism and its relationship to mental health in Asian and African Americans using a cross-cultural framework.

    PubMed

    DiBartolo, Patricia Marten; Rendón, María José

    2012-04-01

    Although the bulk of the research literature on the construct of perfectionism and its relationship to mental health in the last 20 years has focused predominantly on Caucasian American samples, researchers are paying increasing attention to understanding perfectionism's dimensions across ethnicities. Given this momentum, the purpose of this paper is to use a cross-cultural framework to review published studies assessing perfectionism in members of an ethnic minority group living in the United States. Research to date has focused exclusively on Asian and African American samples and we organize our review by separating this literature into those studies that use level and structure-oriented cross-cultural approaches. Structure-oriented approaches empirically explore the phenomenology and/or correlates of perfectionism within each ethnic group whereas level-oriented approaches examine the relative magnitude of perfectionism's levels across groups. The last section of the review critically examines the strength of the evidence in support of researchers' arguments that certain sociocultural factors, such as collectivism and parenting style, influence perfectionism's expression and implications for ethnic minorities. Throughout the review, we offer a series of steps researchers can take to foster our understanding of perfectionism and its impacts using a cross-cultural perspective. Copyright © 2011 Elsevier Ltd. All rights reserved.

  4. Effect of molecular anisotropy on beam scattering measurements

    NASA Technical Reports Server (NTRS)

    Goldflam, R.; Green, S.; Kouri, D. J.; Monchick, L.

    1978-01-01

    Within the energy sudden approximation, the total integral and total differential scattering cross sections are given by the angle average of scattering cross sections computed at fixed rotor orientations. Using this formalism the effect of molecular anisotropy on scattering of He by HCl and by CO is examined. Comparisons with accurate close coupling calculations indicate that this approximation is quite reliable, even at very low collision energies, for both of these systems. Comparisons are also made with predictions based on the spherical average of the interaction. For HCl the anisotropy is rather weak and its main effect is a slight quenching of the oscillations in the differential cross sections relative to predictions of the spherical averaged potential. For CO the anisotropy is much stronger, so that the oscillatory pattern is strongly quenched and somewhat shifted. It appears that the sudden approximation provides a simple yet accurate method for describing the effect of molecular anisotropy on scattering measurements.

  5. Radially and azimuthally polarized laser induced shape transformation of embedded metallic nanoparticles in glass.

    PubMed

    Tyrk, Mateusz A; Zolotovskaya, Svetlana A; Gillespie, W Allan; Abdolvand, Amin

    2015-09-07

    Radially and azimuthally polarized picosecond (~10 ps) pulsed laser irradiation at 532 nm wavelength led to the permanent reshaping of spherical silver nanoparticles (~30 - 40 nm in diameter) embedded in a thin layer of soda-lime glass. The observed peculiar shape modifications consist of a number of different orientations of nano-ellipsoids in the cross-section of each written line by laser. A Second Harmonic Generation cross-sectional scan method from silver nanoparticles in transmission geometry was adopted for characterization of the samples after laser modification. The presented approach may lead to sophisticated marking of information in metal-glass nanocomposites.

  6. In-beam Fission Study at JAEA

    NASA Astrophysics Data System (ADS)

    Nishio, Katsuhisa

    2013-12-01

    Fission fragment mass distributions were measured in heavy-ion induced fissions using 238U target nucleus. The measured mass distributions changed drastically with incident energy. The results are explained by a change of the ratio between fusion and quasifission with nuclear orientation. A calculation based on a fluctuation dissipation model reproduced the mass distributions and their incident energy dependence. Fusion probability was determined in the analysis. Evaporation residue cross sections were calculated with a statistical model in the reactions of 30Si + 238U and 34S + 238U using the obtained fusion probability in the entrance channel. The results agree with the measured cross sections for seaborgium and hassium isotopes.

  7. In-beam fission study for Heavy Element Synthesis

    NASA Astrophysics Data System (ADS)

    Nishio, Katsuhisa

    2013-12-01

    Fission fragment mass distributions were measured in heavy-ion induced fissions using 238U target nucleus. The measured mass distributions changed drastically with incident energy. The results are explained by a change of the ratio between fusion and qasifission with nuclear orientation. A calculation based on a fluctuation dissipation model reproduced the mass distributions and their incident energy dependence. Fusion probability was determined in the analysis. Evaporation residue cross sections were calculated with a statistical model in the reactions of 30Si + 238U and 34S + 238U using the obtained fusion probability in the entrance channel. The results agree with the measured cross sections for seaborgium and hassium isotopes.

  8. Perceptions of employment relations and permanence in the organization: mediating effects of affective commitment in relations of psychological contract and intention to quit.

    PubMed

    Alcover, Carlos-María; Martínez-Iñigo, David; Chambel, Maria José

    2012-06-01

    Working conditions in call/contact centers influence employees' perceptions of their relations with the organization and their attitudes to work. Such perceptions can be analyzed through the psychological contract. The association between the relational/transactional orientation of the psychological contract and intention to quit the organization was examined, as well as the mediating role of affective commitment in employment relations. Data were collected from 973 employees in a cross-sectional survey. Analysis confirmed that there was a statistically significant relation between the orientation of the psychological contract and intention to quit, which was positive for transactionally oriented and negative for relationally oriented contracts. A mediating role for affective commitment was also confirmed, and a full mediating effect was reported for both orientations.

  9. Novel Micropatterned Cardiac Cell Cultures with Realistic Ventricular Microstructure

    PubMed Central

    Badie, Nima; Bursac, Nenad

    2009-01-01

    Systematic studies of cardiac structure-function relationships to date have been hindered by the intrinsic complexity and variability of in vivo and ex vivo model systems. Thus, we set out to develop a reproducible cell culture system that can accurately replicate the realistic microstructure of native cardiac tissues. Using cell micropatterning techniques, we aligned cultured cardiomyocytes at micro- and macroscopic spatial scales to follow local directions of cardiac fibers in murine ventricular cross sections, as measured by high-resolution diffusion tensor magnetic resonance imaging. To elucidate the roles of ventricular tissue microstructure in macroscopic impulse conduction, we optically mapped membrane potentials in micropatterned cardiac cultures with realistic tissue boundaries and natural cell orientation, cardiac cultures with realistic tissue boundaries but random cell orientation, and standard isotropic monolayers. At 2 Hz pacing, both microscopic changes in cell orientation and ventricular tissue boundaries independently and synergistically increased the spatial dispersion of conduction velocity, but not the action potential duration. The realistic variations in intramural microstructure created unique spatial signatures in micro- and macroscopic impulse propagation within ventricular cross-section cultures. This novel in vitro model system is expected to help bridge the existing gap between experimental structure-function studies in standard cardiac monolayers and intact heart tissues. PMID:19413993

  10. The Impact of Market Orientation on Patient Safety Climate Among Hospital Nurses.

    PubMed

    Weng, Rhay-Hung; Chen, Jung-Chien; Pong, Li-Jung; Chen, Li-Mei; Lin, Tzu-Chi

    2016-03-01

    Improving market orientation and patient safety have become the key concerns of nursing management. For nurses, establishing a patient safety climate is the key to enhancing nursing quality. This study explores how market orientation affects the climate of patient safety among hospital nurses. We proposed adopting a cross-sectional research design and using questionnaires to collect responses from nurses working in two Taiwanese hospitals. Three-hundred and forty-three valid samples were obtained. Multiple regression and path analyses were conducted to test the study. Market orientation was defined as the combination of customer orientation, competitor orientation, and interfunctional coordination. Customer orientation directly affects the climate of patient safety. Although the findings only supported Hypothesis 1, competitor orientation and interfunctional coordination positively affected the patient safety climate through the mediating effects of hospital support for staff. Health care managers could encourage nurses to adopt customer-oriented perspectives to enhance their nursing care. In addition, to enhance competitor orientation, interfunctional coordination, and the patient safety climate, hospital managers could strengthen their support for staff members. © The Author(s) 2014.

  11. The mediating role of demand and control in the relationship between leadership behaviour and employee distress: a cross-sectional study.

    PubMed

    Lornudd, Caroline; Tafvelin, Susanne; von Thiele Schwarz, Ulrica; Bergman, David

    2015-02-01

    The relationship between leadership and employee distress is well established, however, the processes involved in this relationship remain largely unclear. For a stretched nursing workforce, understanding in what ways leadership may influence employee distress is particularly important. To examine possible mediating effects of the work environment factors demand and control in the relationship between leadership behaviour in change, production, and employee orientation and employee distress. Cross-sectional study design. The study was conducted at a large county council in Sweden providing both institutional and non-institutional care. A random sample of 1249 employees (primarily nurses, but also a wide range of other healthcare professionals and administrative staff), who had a healthcare manager that was about to enter a leadership development programme (n=171), responded to a web-based questionnaire. The response rate was 62%. The employees rated their healthcare managers' behaviour in change, production, and employee orientation, as well as their own perceptions of level of demand, control (subdivided into decision authority and skill discretion), and five distress outcomes. Multilevel analysis was performed. The mediators demand, decision authority, and skill discretion were significant predictors of all five distress outcomes for all three leadership orientations. In eight of 15 regressions, the mediators fully explained the relationships between leadership orientations and outcomes. Four of five relationships with distress outcomes were fully mediated for change-oriented leadership, whereas two of five outcomes were fully mediated for production- and employee-oriented leadership. In all three leadership orientations, the relationship between the mediator skill discretion and the distress measure disengagement were particularly strong, with B-coefficients (-.44, p<.001) twice as high as for any of the other relationships. It seems that the way that employees perceive healthcare managers' change-oriented behaviour, and how that aspect is related to employee distress, is primarily explained by perception of demand and control. Furthermore, regardless of leadership behaviour orientation, how employees perceive their opportunity to use specific job skills plays an important role in the interplay between perception of healthcare managers' behaviour and disengagement. Copyright © 2014 Elsevier Ltd. All rights reserved.

  12. Interpreting the three-dimensional orientation of vascular canals and cross-sectional geometry of cortical bone in birds and bats.

    PubMed

    Pratt, Isaac V; Johnston, James D; Walker, Ernie; Cooper, David M L

    2018-06-01

    Cortical bone porosity and specifically the orientation of vascular canals is an area of growing interest in biomedical research and comparative/paleontological anatomy. The potential to explain microstructural adaptation is of great interest. However, the determinants of the development of canal orientation remain unclear. Previous studies of birds have shown higher proportions of circumferential canals (called laminarity) in flight bones than in hindlimb bones, and interpreted this as a sign that circumferential canals are a feature for resistance to the torsional loading created by flight. We defined the laminarity index as the percentage of circumferential canal length out of the total canal length. In this study we examined the vascular canal network in the humerus and femur of a sample of 31 bird and 24 bat species using synchrotron micro-computed tomography (micro-CT) to look for a connection between canal orientation and functional loading. The use of micro-CT provides a full three-dimensional (3D) map of the vascular canal network and provides measurements of the 3D orientation of each canal in the whole cross-section of the bone cortex. We measured several cross-sectional geometric parameters and strength indices including principal and polar area moments of inertia, principal and polar section moduli, circularity, buckling ratio, and a weighted cortical thickness index. We found that bat cortices are relatively thicker and poorly vascularized, whereas those of birds are thinner and more highly vascularized, and that according to our cross-sectional geometric parameters, bird bones have a greater resistance to torsional stress than the bats; in particular, the humerus in birds is more adapted to resist torsional stresses than the femur. Our results show that birds have a significantly (P = 0.031) higher laminarity index than bats, with birds having a mean laminarity index of 0.183 in the humerus and 0.232 in the femur, and bats having a mean laminarity index of 0.118 in the humerus and 0.119 in the femur. Counter to our expectation, the birds had a significantly higher laminarity index in the femur than in the humerus (P = 0.035). To evaluate whether this discrepancy was a consequence of methodology we conducted a comparison between our 3D method and an analogue to two-dimensional (2D) histological measurements. This comparison revealed that 2D methods significantly underestimate (P < 0.001) the amount of longitudinal canals by an average of 20% and significantly overestimate (P < 0.001) the laminarity index by an average of 7.7%, systematically mis-estimating indices of vascular canal orientations. In comparison with our 3D results, our approximated 2D measurement had the same results for comparisons between the birds and bats but found significant differences only in the longitudinal index between the humerus and the femur for both groups. The differences between our 3D and pseudo-2D results indicate that differences between our findings and the literature may be partially based in methodology. Overall, our results do not support the hypothesis that the bones of flight are more laminar, suggesting a complex relation between functional loading and microstructural adaptation. © 2018 The Authors. Journal of Anatomy published by John Wiley & Sons Ltd on behalf of Anatomical Society.

  13. Discharge dynamics of self-oriented microplasma coupling between cross adjacent cavities in micro-structure device driven by a bipolar pulse waveform

    NASA Astrophysics Data System (ADS)

    Wang, Yaogong; Zhang, Xiaoning; Liu, Lingguang; Zhou, Xuan; Liu, Chunliang; Zhang, Qiaogen

    2018-04-01

    The excitation dynamics and self-oriented plasma coupling of a micro-structure plasma device with a rectangular cross-section are investigated. The device consists of 7 × 7 microcavity arrays, which are blended into a unity by a 50 μm-thick bulk area above them. The device is operated in argon with a pressure of 200 Torr, driven by a bipolar pulse waveform of 20 kHz. The discharge evolution is characterized by means of electrical measurements and optical emission profiles. It has been found that different emission patterns are observed within microcavities. The formation of these patterns induced by the combined action between the applied electric field and surface deactivation is discussed. The microplasma distribution in some specific regions along the diagonal direction of cavities in the bulk area is observed, and self-oriented microplasma coupling is explored, while the plasma interaction occurred between cross adjacent cavities, contributed by the ionization wave propagation. The velocity of ionization wave propagation is measured to be 1.2 km/s to 3.5 km/s. The exploration of this plasma interaction in the bulk area is of value to applications in electromagnetics and signal processing.

  14. Differentiation of grain orientation with corrosive and colour etching on a granular bainitic steel.

    PubMed

    Reisinger, S; Ressel, G; Eck, S; Marsoner, S

    2017-08-01

    This study presents a detailed verification of the etching methods with Nital and Klemm on a granular bainitic steel. It is shown that both methods allow the identification of the crystal orientation, whereas Klemm etching enables also a quantification of the apparent phases, as also retained austenite can be distinguished from the other bainitic microstructures. A combination of atom probe tomography with electron-back-scattered-diffraction showed that both etching methods emphasize the bainitic {100} crystal orientation. However, a cross-section produced by focused ion beam evidenced that Klemm etching leads to the formation of a topography of the different oriented bainitic crystals that directly affects the thickness and therefore the apparent colour of the deposited layer formed during etching. Copyright © 2017 Elsevier Ltd. All rights reserved.

  15. Illustration of cross flow of polystyrene melts through a coathanger die

    NASA Astrophysics Data System (ADS)

    Schöppner, V.; Henke, B.

    2015-05-01

    To design an optimal coathanger die with a uniform flow rate distribution and low pressure drop, it is essential to understand the flow conditions in the die. This is important because the quality of the product is influenced by the flow velocity and the flow rate distribution. In extrusion dies, cross flows also occur in addition to the main flow, which flow perpendicular to the main flow. This results in pressure gradients in the extrusion direction, which have an influence on flow distribution and pressure drop in the die. In recent decades, quantitative representation and analysis of physical flow processes have made considerable progress in predicting the weather, developing drive technologies and designing aircraft using simulation methods and lab trials. Using the flow-line method, the flow is analyzed in flat film extrusion dies with a rectangular cross-section, in particular cross flows. The simplest method to visualize the flow is based on the measurement of obstacle orientation in the flow field by adding individual particles. A near-surface flow field can be visualized by using wool or textile yarns. By sticking thin, frayed at the ends of strands of wool surface that is to be examined cross flows, near-wall profiles of the flow and vortex and separation regions can be visualized. A further possibility is to add glass fibers and analyze the fiber orientation by microscopy and x-ray analysis. In this paper the influence of process parameters (e.g. melt temperatures and throughput) on cross flow and fiber orientation is described.

  16. Extension-torsion coupling behavior of advanced composite tilt-rotor blades

    NASA Technical Reports Server (NTRS)

    Kosmatka, J. B.

    1989-01-01

    An analytic model was developed to study the extension-bend-twist coupling behavior of an advanced composite helicopter or tilt-rotor blade. The outer surface of the blade is defined by rotating an arbitrary cross section about an initial twist axis. The cross section can be nonhomogeneous and composed of generally anisotropic materials. The model is developed based upon a three dimensional elasticity approach that is recast as a coupled two-dimensional boundary value problem defined in a curvilinear coordinate system. Displacement solutions are written in terms of known functions that represent extension, bending, and twisting and unknown functions for local cross section deformations. The unknown local deformation functions are determined by applying the principle of minimum potential energy to the discretized two-dimensional cross section. This is an application of the Ritz method, where the trial function family is the displacement field associated with a finite element (8-node isoparametric quadrilaterals) representation of the section. A computer program was written where the cross section is discretized into 8-node quadrilateral subregions. Initially the program was verified using previously published results (both three-dimensional elasticity and technical beam theory) for pretwisted isotropic bars with an elliptical cross section. In addition, solid and thin-wall multi-cell NACA-0012 airfoil sections were analyzed to illustrate the pronounced effects that pretwist, initial twist axis location, and spar location has on coupled behavior. Currently, a series of advanced composite airfoils are being modeled in order to assess how the use of laminated composite materials interacts with pretwist to alter the coupling behavior of the blade. These studies will investigate the use of different ply angle orientations and the use of symmetric versus unsymmetric laminates.

  17. Social Work Field Instructors' Integration of Religion and Spirituality in Clinical Practice

    ERIC Educational Resources Information Center

    Oxhandler, Holly K.

    2017-01-01

    This article describes a national sample of social work field instructors' responses to a cross-sectional survey of social workers' orientation toward integrating clients' religion and spirituality into practice and compares their responses with those of nonfield instructors. Four hundred sixty-nine social workers, including 69 MSW field…

  18. Family Transmission of Work Affectivity and Experiences to Children

    ERIC Educational Resources Information Center

    Porfeli, Erik J.; Wang, Chuang; Hartung, Paul J.

    2008-01-01

    Theory and research suggest that children develop orientations toward work appreciably influenced by their family members' own expressed work experiences and emotions. Cross-sectional data from 100 children (53 girls, 47 boys; mean age = 11.1 years) and structural equation modeling were used to assess measures of work affectivity and experiences…

  19. Temperament Dimensions in Preschool Children: Links with Cognitive and Affective Theory of Mind

    ERIC Educational Resources Information Center

    Longobardi, Emiddia; Spataro, Pietro; D'Alessandro, Marta; Cerutti, Rita

    2017-01-01

    Research Findings: The present cross-sectional study investigated the question of whether 6 different temperament dimensions (inhibition to novelty, social orientation, motor activity, positive emotionality, negative emotionality, and attention) influenced cognitive and affective theory of mind (ToM) in 168 children (86 three/four-year-olds and 82…

  20. Development of Attention Networks and Their Interactions in Childhood

    ERIC Educational Resources Information Center

    Pozuelos, Joan P.; Paz-Alonso, Pedro M.; Castillo, Alejandro; Fuentes, Luis J.; Rueda, M. Rosario

    2014-01-01

    In the present study, we investigated developmental trajectories of alerting, orienting, and executive attention networks and their interactions over childhood. Two cross-sectional experiments were conducted with different samples of 6-to 12-year-old children using modified versions of the attention network task (ANT). In Experiment 1 (N = 106),…

  1. Age-Related Differences in Moral Identity across Adulthood

    ERIC Educational Resources Information Center

    Krettenauer, Tobias; Murua, Lourdes Andrea; Jia, Fanli

    2016-01-01

    In this study, age-related differences in adults' moral identity were investigated. Moral identity was conceptualized a context-dependent self-structure that becomes differentiated and (re)integrated in the course of development and that involves a broad range of value-orientations. Based on a cross-sectional sample of 252 participants aged 14 to…

  2. A Confirmatory Factor Analysis of the Professional Opinion Scale

    ERIC Educational Resources Information Center

    Greeno, Elizabeth J.; Hughes, Anne K.; Hayward, R. Anna; Parker, Karen L.

    2007-01-01

    The Professional Opinion Scale (POS) was developed to measure social work values orientation. Objective: A confirmatory factor analysis was performed on the POS. Method: This cross-sectional study used a mailed survey design with a national random (simple) sample of members of the National Association of Social Workers. Results: The study…

  3. Composite ultrasound imaging apparatus and method

    DOEpatents

    Morimoto, Alan K.; Bow, Jr., Wallace J.; Strong, David Scott; Dickey, Fred M.

    1998-01-01

    An imaging apparatus and method for use in presenting composite two dimensional and three dimensional images from individual ultrasonic frames. A cross-sectional reconstruction is applied by using digital ultrasound frames, transducer orientation and a known center. Motion compensation, rank value filtering, noise suppression and tissue classification are utilized to optimize the composite image.

  4. Composite ultrasound imaging apparatus and method

    DOEpatents

    Morimoto, A.K.; Bow, W.J. Jr.; Strong, D.S.; Dickey, F.M.

    1998-09-15

    An imaging apparatus and method for use in presenting composite two dimensional and three dimensional images from individual ultrasonic frames. A cross-sectional reconstruction is applied by using digital ultrasound frames, transducer orientation and a known center. Motion compensation, rank value filtering, noise suppression and tissue classification are utilized to optimize the composite image. 37 figs.

  5. Characterization of Plastic flow and Resulting Micro-Textures in a Friction Stir Weld

    NASA Technical Reports Server (NTRS)

    Schneider, J. A.; Nunes, A. C., Jr.

    2003-01-01

    The mechanically affected zone of a friction stir weld (FSW) cross section exhibits two distinct microstructural regions, possibly the residues of two distinct currents of metal in the FSW flow process. In this study the respective textures of these microstructural regions are investigated using orientation image mapping (OIM).

  6. Nanoscale Electrostructural Characterization of Compositionally Graded Al(x)Ga(1-x)N Heterostructures on GaN/Sapphire (0001) Substrate.

    PubMed

    Kuchuk, Andrian V; Lytvyn, Petro M; Li, Chen; Stanchu, Hryhorii V; Mazur, Yuriy I; Ware, Morgan E; Benamara, Mourad; Ratajczak, Renata; Dorogan, Vitaliy; Kladko, Vasyl P; Belyaev, Alexander E; Salamo, Gregory G

    2015-10-21

    We report on AlxGa1-xN heterostructures resulting from the coherent growth of a positive then a negative gradient of the Al concentration on a [0001]-oriented GaN substrate. These polarization-doped p-n junction structures were characterized at the nanoscale by a combination of averaging as well as depth-resolved experimental techniques including: cross-sectional transmission electron microscopy, high-resolution X-ray diffraction, Rutherford backscattering spectrometry, and scanning probe microscopy. We observed that a small miscut in the substrate orientation along with the accumulated strain during growth led to a change in the mosaic structure of the AlxGa1-xN film, resulting in the formation of macrosteps on the surface. Moreover, we found a lateral modulation of charge carriers on the surface which were directly correlated with these steps. Finally, using nanoscale probes of the charge density in cross sections of the samples, we have directly measured, semiquantitatively, both n- and p-type polarization doping resulting from the gradient concentration of the AlxGa1-xN layers.

  7. Numerical approximations of the mean absorption cross-section of a variety of randomly oriented microalgal shapes.

    PubMed

    Baird, Mark E

    2003-10-01

    The size, shape, and absorption coefficient of a microalgal cell determines, to a first order approximation, the rate at which light is absorbed by the cell. The rate of absorption determines the maximum amount of energy available for photosynthesis, and can be used to calculate the attenuation of light through the water column, including the effect of packaging pigments within discrete particles. In this paper, numerical approximations are made of the mean absorption cross-section of randomly oriented cells, aA. The shapes investigated are spheroids, rectangular prisms with a square base, cylinders, cones and double cones with aspect ratios of 0.25, 0.5, 1, 2, and 4. The results of the numerical simulations are fitted to a modified sigmoid curve, and take advantage of three analytical solutions. The results are presented in a non-dimensionalised format and are independent of size. A simple approximation using a rectangular hyperbolic curve is also given, and an approach for obtaining the upper and lower bounds of aA for more complex shapes is outlined.

  8. Stress and Coping among Black Women Employed in Non-professional Service and Professional Occupations in Florida and Georgia.

    PubMed

    Gary, Faye A; Yarandi, Hossein; Hassan, Mona

    2015-08-01

    Culture enhances the ability to address the stressors related to ethnicity/race, employment, and lifestyle. From this interaction, two coping patterns emerge: individualist-oriented or collectivist-oriented, of which women prefer the latter. However, there is limited knowledge about the impact of ethnicity/race on the coping strategies of Black working women in the USA. Therefore, the purpose of this cross-sectional survey was to examine the coping strategies of two groups of Black women, those who work in non-professional service-related jobs and those employed as professionals. We explored Black women from two southern states, Florida and Georgia, in their use of coping strategies for everyday stressors. A modified version of Lazarus and Folkman's Transactional Model was used as the framework of this study. The sample for this cross-sectional survey consisted of 313 Black women employed in non-professional service jobs and 343 in professional roles. The thoughts and actions related to coping in everyday stressors were measured with The Ways of Coping Questionnaire.

  9. [Dynamics of tuning to orientation of cross-like figures in neurons from the cat visual cortex].

    PubMed

    Lazareva, N A; Tsutskiridze, D Iu; Shevelev, I A; Novikova, R V; Tikhomirov, A S; Sharaev, G A

    2003-01-01

    Dynamics of tuning to orientation of flashing light bar and to orientation of cross-like figure was studied by a temporal slices method in 87 neurons of the cat primary visual cortex. Tuning was plotted by spikes number in the entire response and in its successive fragments with a step of 20 ms. It was found that successive dynamic shift of preferred orientation of a bar was typical for 87% units, white such shift of preferred orientation of a cross was met in 75% of cases. Comparison of tuning dynamics for bar and cross allowed to separate units into three groups: the first one (58.6% of cases) with larger dynamic shift of a bar preferred orientation then of a cross (74.9 +/- 5.8 degrees [symbol: see text] 29.8 +/- 4.1 degrees, correspondingly, p < 0.00001), the second group (21.5%) with opposite effect (24.2 +/- 5.2 degrees and 69.2 +/- 10.0 degrees, p < 0.0002) and the third group (19.8%) without significant shift of preferred orientation of bar and cross and without difference in their dynamics. Possible mechanisms of the preferred orientation dynamics and its difference for bar and cross are discussed.

  10. Stakeout surveys for check dams in gullied areas by using the FreeXSap photogrammetric method

    NASA Astrophysics Data System (ADS)

    Castillo, Carlos; Marín-Moreno, Víctor; Taguas, Encarnación V.

    2017-04-01

    Prior to any check dam construction work, it is necessary to carry out field stakeout surveys to define the layout of the dam series according to spacing criteria. While in expensive and complex settings, accurate measurement techniques might be justified (e.g. differential GPS), for small to medium-sized check dams typical of areas affected by gully erosion, simpler methodologies might be more cost-efficient. Innovative 3D photogrammetric techniques based on Structure-from-Motion (SfM) algorithms have proved to be useful across different geomorphological applications and have been successfully applied for gully assessment. In this communication, we present an efficient methodology consisting of the application of a free interface for photogrammetric reconstruction (FreeXSap) combined with simple distance measurements to obtain channel cross-sections determining the width and height of the check dam for a particular cross-section. We will illustrate its use for a hundred-meter-long gully under conventional agriculture in Córdoba (Spain). FreeXSap is an easy-to-use graphical user interface written in Matlab Code (Mathworks, 2016) for the reconstruction of 3D models from image sets taken with digital consumer-grade cameras. The SfM algorithms are based on MicMac scripts (Pierrot-Deseilligny and Cléry, 2011) along with routines specifically developed for the orientation, determination and geometrical analysis of cross-sections. It only requires the collection of a few pictures of a channel cross-section (normally below 5) by the camera operator to build an accurate 3D model, while a second operator holds a pole in vertical position (with the help of a bubble level attached to the pole) in order to provide orientation and scale for further processing. The spacing between check dams was determined using the head-to-toe rule by using a clinometer App on a Smartphone. In this work we will evaluate the results of the application of this methodology in terms of time and cost requirements and the capabilities and operation procedure of FreeXSap will be presented. This tool will be available for free download. REFERENCES Pierrot-Deseilligny, M and Cléry, I. APERO, an Open Source Bundle Adjusment Software for Automatic Calibration and Orientation of a Set of Images. Proceedings of the ISPRS Commission V Symposium, Image Engineering and Vision Metrology, Trento, Italy, 2-4 March 2011.

  11. Fulfilment of administrative and professional organisational obligations and nurses' customer-oriented behaviours.

    PubMed

    Trybou, Jeroen; Gemmel, Paul

    2016-07-01

    The aim of the study was to examine the relationship between the perceived quality of organisational exchange and nurses' customer-oriented behaviours. Hospitals face increasing competitive market conditions. Registered nurses interact closely with patients and therefore play an important front-office role towards patients. A cross-sectional study was conducted. Registered nurses (n = 151) of a Belgian hospital received a questionnaire to assess the fulfilment of administrative and professional organisational obligations and their customer-oriented behaviours. We found a positive relationship between psychological contract fulfilment and nurses' customer-oriented behaviours. More precisely administrative and professional psychological contract fulfilment relates significantly to nurses' service delivery and external representation. In case of internal influence only administrative psychological contract fulfilment was significantly related. Nurses' perceptions of the fulfilment of administrative and professional obligations are important to their customer-oriented behaviours. Nurse managers must be aware of the impact of fulfilling both administrative and professional obligations of registered nurses in order to optimise their customer-oriented behaviours. © 2016 John Wiley & Sons Ltd.

  12. Effects of Sn Layer Orientation on the Evolution of Cu/Sn Interfaces

    NASA Astrophysics Data System (ADS)

    Sun, Menglong; Zhao, Zhangjian; Hu, Fengtian; Hu, Anmin; Li, Ming; Ling, Huiqin; Hang, Tao

    2018-03-01

    The effects of Sn layer orientation on the evolution of Cu/Sn joint interfaces were investigated. Three Sn layers possessing (112), (321) and (420) orientations were electroplated on polycrystalline Cu substrates respectively. The orientations of Sn layer preserved during reflowing at 250 °C for 10 s. After aging at 150 °C for different time, the interfacial microstructures were observed from the cross-section and top-view. The alignment between the c-axis of Sn and Cu diffusion direction significantly sped up the Cu diffusion, leading to the thickest intermetallic compound layer formed in (112) joint. Two types of voids, namely, intracrystalline voids and grain islanding caused intercrystalline voids generated at Cu/Cu3Sn interfaces due to the different interdiffusion coefficients of Cu and Sn (112) oriented Sn/Cu joint produced many more voids than (321) joint, and no voids were detected in (420) joint. Therefore, to enhance the reliability of solder joints, using (420) oriented Sn as solder layer could be an efficient way.

  13. GaN nanowires with pentagon shape cross-section by ammonia-source molecular beam epitaxy

    DOE PAGES

    Lin, Yong; Leung, Benjamin; Li, Qiming; ...

    2015-07-14

    In this study, ammonia-based molecular beam epitaxy (NH 3-MBE) was used to grow catalyst-assisted GaN nanowires on (11¯02) r-plane sapphire substrates. Dislocation free [112¯0] oriented nanowires are formed with pentagon shape cross-section, instead of the usual triangular shape facet configuration. Specifically, the cross-section is the result of the additional two nonpolar {101¯0} side facets, which appear due to a decrease in relative growth rate of the {101¯0} facets to the {101¯1} and {101¯1} facets under the growth regime in NH 3-MBE. Compared to GaN nanowires grown by Ni-catalyzed metal–organic chemical vapor deposition, the NH 3-MBE grown GaN nanowires show moremore » than an order of magnitude increase in band-edge to yellow luminescence intensity ratio, as measured by cathodoluminescence, indicating improved microstructural and optical properties.« less

  14. Elliptical storm cell modeling of digital radar data

    NASA Technical Reports Server (NTRS)

    Altman, F. J.

    1972-01-01

    A model for spatial distributions of reflectivity in storm cells was fitted to digital radar data. The data were taken with a modified WSR-57 weather radar with 2.6-km resolution. The data consisted of modified B-scan records on magnetic tape of storm cells tracked at 0 deg elevation for several hours. The MIT L-band radar with 0.8-km resolution produced cross-section data on several cells at 1/2 deg elevation intervals. The model developed uses ellipses for contours of constant effective-reflectivity factor Z with constant orientation and eccentricity within a horizontal cell cross section at a given time and elevation. The centers of the ellipses are assumed to be uniformly spaced on a straight line, with areas linearly related to log Z. All cross sections are similar at different heights (except for cell tops, bottoms, and splitting cells), especially for the highest reflectivities; wind shear causes some translation and rotation between levels. Goodness-of-fit measures and parameters of interest for 204 ellipses are considered.

  15. Importance of projectile-target interactions in the triple differential cross sections for Low energy (e,2e) ionization of aligned H2

    NASA Astrophysics Data System (ADS)

    Ali, Esam; Madison, Don; Ren, X.; Dorn, A.; Ning, Chuangang

    2014-10-01

    Experimental and theoretical Triple Differential Cross Sections (TDCS) are presented for electron impact ionization-excitation of the 2 sσg state of H2 in the perpendicular plane. The excited 2 sσg state immediately dissociates and the alignment of the molecule is determined by detecting one of the fragments. Results are presented for three different alignments in the xy-plane (scattering plane is xz)-alignment along y-axis, x-axis, and 45° between the x- and y-axes for incident electron energies of 4, 10, and 25 eV and different scattered electron angles of 20° and 30° in the perpendicular plane. Theoretical M4DW (molecular 4-body distorted wave) results are compared to experimental data, and overall we found reasonably good agreement between experiment and theory. The Results show that (e,2e) cross sections for excitation-ionization depend strongly on the orientation of the H2 molecule.

  16. Application of Computer Axial Tomography (CAT) to measuring crop canopy geometry. [corn and soybeans

    NASA Technical Reports Server (NTRS)

    Bauer, M. E.; Vanderbilt, V. C. (Principal Investigator); Kilgore, R. W.

    1981-01-01

    The feasibility of using the principles of computer axial topography (CAT) to quantify the structure of crop canopies was investigated because six variables are needed to describe the position-orientation with time of a small piece of canopy foliage. Several cross sections were cut through the foliage of healthy, green corn and soybean canopies in the dent and full pod development stages, respectively. A photograph of each cross section representing the intersection of a plane with the foliage was enlarged and the air-foliage boundaries delineated by the plane were digitized. A computer program was written and used to reconstruct the cross section of the canopy. The approach used in applying optical computer axial tomography to measuring crop canopy geometry shows promise of being able to provide needed geometric information for input data to canopy reflectance models. The difficulty of using the CAT scanner to measure large canopies of crops like corn is discussed and a solution is proposed involving the measurement of plants one at a time.

  17. Evaluating child care in the Family Health Strategy.

    PubMed

    da Silva, Simone Albino; Fracolli, Lislaine Aparecida

    2016-01-01

    to evaluate the healthcare provided to children under two years old by the Family Health Strategy. evaluative, quantitative, cross-sectional study that used the Primary Care Assessment Tool - Child Version for measuring the access, longitudinality, coordination, integrality, family orientation and community orientation. a total of 586 adults responsible for children under two years old and linked to 33 health units in eleven municipalities of the state of Minas Gerais, Brazil, were interviewed. The evaluation was positive for the attributes longitudinality and coordination, and negative for access, integrality, Family orientation and community orientation. there are discrepancies between health needs of children and what is offered by the service; organizational barriers to access; absence of counter-reference; predominance of curative and long-standing and individual preventive practices; verticalization in organization of actions; and lack of good communication between professionals and users.

  18. Orientation-dependent fiber-optic accelerometer based on grating inscription over fiber cladding.

    PubMed

    Rong, Qiangzhou; Qiao, Xueguang; Guo, Tuan; Bao, Weijia; Su, Dan; Yang, Hangzhou

    2014-12-01

    An orientation-sensitive fiber-optic accelerometer based on grating inscription over fiber cladding has been demonstrated. The sensor probe comprises a compact structure in which a short section of thin-core fiber (TCF) stub containing a "cladding" fiber Bragg grating (FBG) is spliced to another single-mode fiber (SMF) without any lateral offset. A femtosecond laser side-illumination technique was utilized to ensure that the grating inscription remains close to the core-cladding interface of the TCF. The core mode and the cladding mode of the TCF are coupled at the core-mismatch junction, and two well-defined resonances in reflection appear from the downstream FBG, in which the cladding resonance exhibits a strong polarization and bending dependence due to the asymmetrical distribution of the cladding FBG along the fiber cross section. Strong orientation dependence of the vibration (acceleration) measurement has been achieved by power detection of the cladding resonance. Meanwhile, the unwanted power fluctuations and temperature perturbations can be referenced out by monitoring the fundamental core resonance.

  19. Uncertainty quantification of fiber orientation distribution measurements for long-fiber-reinforced thermoplastic composites

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Sharma, Bhisham N.; Naragani, Diwakar; Nguyen, Ba Nghiep

    We present a detailed methodology for experimental measurement of fiber orientation distribution (FOD) in injection-molded discontinuous fiber composites using the method of ellipses on 2D cross sections. Best practices to avoid biases occurring during surface preparation and optical imaging of carbon-fiber-reinforced thermoplastics are discussed. A marker-based watershed transform routine for efficient image segmentation and the separation of touching fiber ellipses is developed. The sensitivity of the averaged orientation tensor to the image sample size is studied for the case of long-fiber thermoplastics. A Mori-Tanaka implementation of the Eshelby model is then employed to quantify the sensitivity of elastic stiffness predictionsmore » to biases in the FOD measurements.« less

  20. Magnetically induced orientation of mesochannels in mesoporous silica films at 30 tesla.

    PubMed

    Yamauchi, Yusuke; Sawada, Makoto; Komatsu, Masaki; Sugiyama, Atsushi; Osaka, Tetsuya; Hirota, Noriyuki; Sakka, Yoshio; Kuroda, Kazuyuki

    2007-12-03

    We demonstrate the magnetically induced orientation of mesochannels in mesoporous silica films prepared with low-molecular-weight surfactants under an extremely high magnetic field of 30 T. This process is principally applicable to any type of surfactant that has magnetic anisotropy because such a high magnetic field provides sufficient magnetic energy for smooth magnetic orientation. Hexadecyltrimethylammonium bromide (CTAB) and polyoxyethylene-10-cetyl ether (Brij 56) were used as cationic and nonionic surfactants, respectively. According to XRD and cross-sectional TEM, mesochannels aligned perpendicular to the substrates were observed in films prepared with low-molecular-weight surfactants, although the effect was incomplete. The evolution of these types of films should lead to future applications such as highly sensitive chemical sensors and selective separation.

  1. Nurses' ethical conflicts in performance of utilization reviews.

    PubMed

    Bell, Sue Ellen

    2003-09-01

    This article describes the ethical conflicts that a sample of US nurse utilization reviewers faced in their work, and also each nurse's self-reported ethical orientation that was used to resolve the dilemmas. Data were collected from a sample of 97 registered nurses who were working at least 20 hours per week as utilization reviewers. Respondents were recruited from three managed care organizations that conduct utilization reviews in a large midwestern city. A cross-sectional survey design was used to collect demographic data and to ask closed-response, short-answer and open-ended questions. Ethical conflicts reported by nurses were similar across utilization review settings and many were justice orientated. Self-reported ethical orientations were similar across organizations, with beneficence dominating. Implications of these findings are discussed.

  2. Attitudes toward Gay Men and Lesbian Women among Heterosexual Social Work Faculty

    ERIC Educational Resources Information Center

    Chonody, Jill M.; Woodford, Michael R.; Brennan, David J.; Newman, Bernie; Wang, Donna

    2014-01-01

    This study reports results from a national Internet-based survey administered anonymously to a cross-section of social work faculty in the United States. Drawn from a sampling frame of 700 accredited or in candidacy schools, data were collected between November 2010 and March 2011. We investigate the role of sex, sexual orientation, race,…

  3. Non-tracking solar energy collector system

    NASA Technical Reports Server (NTRS)

    Selcuk, M. K. (Inventor)

    1978-01-01

    A solar energy collector system is described characterized by an improved concentrator for directing incident rays of solar energy on parallel strip-like segments of a flatplate receiver. Individually mounted reflector modules of a common asymmetrical triangular cross-sectional configuration supported for independent orientation are asymmetric included with vee-trough concentrators for deflecting incident solar energy toward the receiver.

  4. Stability and Change in Social Goals as Related to Goal Structures and Engagement in School

    ERIC Educational Resources Information Center

    Madjar, Nir

    2017-01-01

    The current studies explored (a) the extended external validity of social-goal-orientation framework; (b) the mediating role of social goals between classroom goal structures and students' engagement; and (c) whether changes in social goals can be explained by classroom goal structures and engagement. Study 1 was cross-sectional (N = 317), and…

  5. Trends in Sexual Orientation Missing Data Over a Decade of the California Health Interview Survey

    PubMed Central

    Viana, Joseph; Grant, David; Cochran, Susan D.; Lee, Annie C.; Ponce, Ninez A.

    2015-01-01

    Objectives. We explored changes in sexual orientation question item completion in a large statewide health survey. Methods. We used 2003 to 2011 California Health Interview Survey data to investigate sexual orientation item nonresponse and sexual minority self-identification trends in a cross-sectional sample representing the noninstitutionalized California household population aged 18 to 70 years (n = 182 812 adults). Results. Asians, Hispanics, limited-English-proficient respondents, and those interviewed in non-English languages showed the greatest declines in sexual orientation item nonresponse. Asian women, regardless of English-proficiency status, had the highest odds of item nonresponse. Spanish interviews produced more nonresponse than English interviews and Asian-language interviews produced less nonresponse when we controlled for demographic factors and survey cycle. Sexual minority self-identification increased in concert with the item nonresponse decline. Conclusions. Sexual orientation nonresponse declines and the increase in sexual minority identification suggest greater acceptability of sexual orientation assessment in surveys. Item nonresponse rate convergence among races/ethnicities, language proficiency groups, and interview languages shows that sexual orientation can be measured in surveys of diverse populations. PMID:25790399

  6. Wet spinning of fibers made of chitosan and chitin nanofibrils.

    PubMed

    Yudin, Vladimir E; Dobrovolskaya, Irina P; Neelov, Igor M; Dresvyanina, Elena N; Popryadukhin, Pavel V; Ivan'kova, Elena M; Elokhovskii, Vladimir Yu; Kasatkin, Igor A; Okrugin, Boris M; Morganti, Pierfrancesco

    2014-08-08

    Biocompatible and bioresorbable composite fibers consisting of chitosan filled with anisotropic chitin nanofibrils with the length of 600-800 nm and cross section of about 11-12 nm as revealed by SEM and XRD were prepared by coagulation. Both chitin and chitosan components of the composite fibers displayed preferred orientations. Orientation of chitosan molecules induced by chitin nanocrystallites was confirmed by molecular modeling. The incorporation of 0.1-0.3 wt.% of chitin nanofibrils into chitosan matrix led to an increase in strength and Young modulus of the composite fibers. Copyright © 2014 Elsevier Ltd. All rights reserved.

  7. FIBER AND INTEGRATED OPTICS. OPTOELECTRONICS: Method for calculation of the parameters of guided waves in anisotropic dielectric waveguides

    NASA Astrophysics Data System (ADS)

    Goncharenko, I. A.

    1989-07-01

    The method of shift formulas is applied to anisotropic dielectric waveguides capable of conserving a given state of polarization of the transmitted signal. Equations are derived for calculation of the propagation constants and of the dispersion of the fundamental modes in waveguides with an anisotropic permittivity and a noncircular shape of the transverse cross section. Distributions of electric and magnetic fields of these modes are obtained in a transverse cross section of the waveguide. It is shown that under the influence of the anisotropy of the dielectric an energy spot describing the distribution of the mode field becomes of an ellipse with its axes oriented along the coordinates coinciding with the principal axes of the permittivity tensor.

  8. Effects of reagent rotational excitation on the H + CHD₃ → H₂ + CD₃ reaction: a seven dimensional time-dependent wave packet study.

    PubMed

    Zhang, Zhaojun; Zhang, Dong H

    2014-10-14

    Seven-dimensional time-dependent wave packet calculations have been carried out for the title reaction to obtain reaction probabilities and cross sections for CHD3 in J0 = 1, 2 rotationally excited initial states with k0 = 0 - J0 (the projection of CHD3 rotational angular momentum on its C3 axis). Under the centrifugal sudden (CS) approximation, the initial states with the projection of the total angular momentum on the body fixed axis (K0) equal to k0 are found to be much more reactive, indicating strong dependence of reactivity on the orientation of the reagent CHD3 with respect to the relative velocity between the reagents H and CHD3. However, at the coupled-channel (CC) level this dependence becomes much weak although in general the K0 specified cross sections for the K0 = k0 initial states remain primary to the overall cross sections, implying the Coriolis coupling is important to the dynamics of the reaction. The calculated CS and CC integral cross sections obtained after K0 averaging for the J0 = 1, 2 initial states with all different k0 are essentially identical to the corresponding CS and CC results for the J0 = 0 initial state, meaning that the initial rotational excitation of CHD3 up to J0 = 2, regardless of its initial k0, does not have any effect on the total cross sections for the title reaction, and the errors introduced by the CS approximation on integral cross sections for the rotationally excited J0 = 1, 2 initial states are the same as those for the J0 = 0 initial state.

  9. An evaluation of fruit and vegetable consumption and cigarette smoking among youth.

    PubMed

    Haibach, Jeffrey P; Homish, Gregory G; Collins, R Lorraine; Ambrosone, Christine B; Giovino, Gary A

    2015-06-01

    Research across the past 4 decades has supported a cross-sectional association between adult cigarette smoking and lower fruit and vegetable consumption (FVC), and emerging research suggests higher FVC may predict cessation. Among youth, findings are limited to a few cross-sectional studies with somewhat mixed results. Here we evaluated the FVC-smoking association among youth both cross-sectionally and longitudinally. We analyzed data from a subsample of the National Longitudinal Survey of Youth 1979: Child and Young Adult. The subsample included adolescents aged 14-18 years at baseline in the year 2004. Multivariable cross-sectional analyses assessed whether baseline FVC was associated with smoking frequency among ever-smokers (n = 578). Longitudinally, the study assessed whether baseline FVC predicted smoking progression among baseline never-smokers who tried a cigarette by 4-year follow-up (n = 388). Multivariable regression models adjusted for age, gender, race/ethnicity, parental education, and health behavior orientation. Cross-sectionally, youth who consumed fruit ≥2 times per day were 53% less likely (RR = 0.47; p < .05) than those who typically did not consume fruit to be in a higher smoking frequency category. Longitudinally, the fruit consumption and smoking association was not significant (RR = 0.61; p = .282). There were no significant associations observed between vegetable consumption and smoking. Fruit consumption, but not vegetable consumption, was inversely associated with smoking frequency cross-sectionally but not longitudinally. Further research is needed to provide information on the consistency of the FVC-smoking relationship among youth and may help to elucidate possible explanatory mechanisms. © The Author 2014. Published by Oxford University Press on behalf of the Society for Research on Nicotine and Tobacco. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  10. In-flight calibration of mesospheric rocket plasma probes

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Havnes, Ove; University Studies Svalbard; Hartquist, Thomas W.

    Many effects and factors can influence the efficiency of a rocket plasma probe. These include payload charging, solar illumination, rocket payload orientation and rotation, and dust impact induced secondary charge production. As a consequence, considerable uncertainties can arise in the determination of the effective cross sections of plasma probes and measured electron and ion densities. We present a new method for calibrating mesospheric rocket plasma probes and obtaining reliable measurements of plasma densities. This method can be used if a payload also carries a probe for measuring the dust charge density. It is based on that a dust probe's effectivemore » cross section for measuring the charged component of dust normally is nearly equal to its geometric cross section, and it involves the comparison of variations in the dust charge density measured with the dust detector to the corresponding current variations measured with the electron and/or ion probes. In cases in which the dust charge density is significantly smaller than the electron density, the relation between plasma and dust charge density variations can be simplified and used to infer the effective cross sections of the plasma probes. We illustrate the utility of the method by analysing the data from a specific rocket flight of a payload containing both dust and electron probes.« less

  11. In-flight calibration of mesospheric rocket plasma probes.

    PubMed

    Havnes, Ove; Hartquist, Thomas W; Kassa, Meseret; Morfill, Gregor E

    2011-07-01

    Many effects and factors can influence the efficiency of a rocket plasma probe. These include payload charging, solar illumination, rocket payload orientation and rotation, and dust impact induced secondary charge production. As a consequence, considerable uncertainties can arise in the determination of the effective cross sections of plasma probes and measured electron and ion densities. We present a new method for calibrating mesospheric rocket plasma probes and obtaining reliable measurements of plasma densities. This method can be used if a payload also carries a probe for measuring the dust charge density. It is based on that a dust probe's effective cross section for measuring the charged component of dust normally is nearly equal to its geometric cross section, and it involves the comparison of variations in the dust charge density measured with the dust detector to the corresponding current variations measured with the electron and/or ion probes. In cases in which the dust charge density is significantly smaller than the electron density, the relation between plasma and dust charge density variations can be simplified and used to infer the effective cross sections of the plasma probes. We illustrate the utility of the method by analysing the data from a specific rocket flight of a payload containing both dust and electron probes.

  12. Extension of the Bgl Broad Group Cross Section Library

    NASA Astrophysics Data System (ADS)

    Kirilova, Desislava; Belousov, Sergey; Ilieva, Krassimira

    2009-08-01

    The broad group cross-section libraries BUGLE and BGL are applied for reactor shielding calculation using the DOORS package based on discrete ordinates method and multigroup approximation of the neutron cross-sections. BUGLE and BGL libraries are problem oriented for PWR or VVER type of reactors respectively. They had been generated by collapsing the problem independent fine group library VITAMIN-B6 applying PWR and VVER one-dimensional radial model of the reactor middle plane using the SCALE software package. The surveillance assemblies (SA) of VVER-1000/320 are located on the baffle above the reactor core upper edge in a region where geometry and materials differ from those of the middle plane and the neutron field gradient is very high which would result in a different neutron spectrum. That is why the application of the fore-mentioned libraries for the neutron fluence calculation in the region of SA could lead to an additional inaccuracy. This was the main reason to study the necessity for an extension of the BGL library with cross-sections appropriate for the SA region. Comparative analysis of the neutron spectra of the SA region calculated by the VITAMIN-B6 and BGL libraries using the two-dimensional code DORT have been done with purpose to evaluate the BGL applicability for SA calculation.

  13. Mixture modeling methods for the assessment of normal and abnormal personality, part I: cross-sectional models.

    PubMed

    Hallquist, Michael N; Wright, Aidan G C

    2014-01-01

    Over the past 75 years, the study of personality and personality disorders has been informed considerably by an impressive array of psychometric instruments. Many of these tests draw on the perspective that personality features can be conceptualized in terms of latent traits that vary dimensionally across the population. A purely trait-oriented approach to personality, however, might overlook heterogeneity that is related to similarities among subgroups of people. This article describes how factor mixture modeling (FMM), which incorporates both categories and dimensions, can be used to represent person-oriented and trait-oriented variability in the latent structure of personality. We provide an overview of different forms of FMM that vary in the degree to which they emphasize trait- versus person-oriented variability. We also provide practical guidelines for applying FMM to personality data, and we illustrate model fitting and interpretation using an empirical analysis of general personality dysfunction.

  14. [Non-verbal communication of patients submitted to heart surgery: from awaking after anesthesia to extubation].

    PubMed

    Werlang, Sueli da Cruz; Azzolin, Karina; Moraes, Maria Antonieta; de Souza, Emiliane Nogueira

    2008-12-01

    Preoperative orientation is an essential tool for patient's communication after surgery. This study had the objective of evaluating non-verbal communication of patients submitted to cardiac surgery from the time of awaking from anesthesia until extubation, after having received preoperative orientation by nurses. A quantitative cross-sectional study was developed in a reference hospital of the state of Rio Grande do Sul, Brazil, from March to July 2006. Data were collected in the pre and post operative periods. A questionnaire to evaluate non-verbal communication on awaking from sedation was applied to a sample of 100 patients. Statistical analysis included Student, Wilcoxon, and Mann Whittney tests. Most of the patients responded satisfactorily to non-verbal communication strategies as instructed on the preoperative orientation. Thus, non-verbal communication based on preoperative orientation was helpful during the awaking period.

  15. Aeroelastic behavior of composite rotor blades with swept tips

    NASA Technical Reports Server (NTRS)

    Yuan, Kuo-An; Friedmann, Peretz P.; Venkatesan, Comandur

    1992-01-01

    This paper presents an analytical study of the aeroelastic behavior of composite rotor blades with straight and swept tips. The blade is modeled by beam type finite elements. A single finite element is used to model the swept tip. The nonlinear equations of motion for the finite element model are derived using Hamilton's principle and based on a moderate deflection theory and accounts for: arbitrary cross-sectional shape, pretwist, generally anisotropic material behavior, transverse shears and out-of-plane warping. Numerical results illustrating the effects of tip sweep, anhedral and composite ply orientation on blade aeroelastic behavior are presented. It is shown that composite ply orientation has a substantial effect on blade stability. At low thrust conditions, certain ply orientations can cause instability in the lag mode. The flap-torsion coupling associated with tip sweep can also induce aeroelastic instability in the blade. This instability can be removed by appropriate ply orientation in the composite construction.

  16. Polarization Spectroscopy and Collisions in NaK

    NASA Astrophysics Data System (ADS)

    Wolfe, C. M.; Ashman, S.; Huennekens, J.; Beser, B.; Bai, J.; Lyyra, A. M.

    2009-05-01

    We report current work to study transfer of population and orientation in collisions of NaK molecules with argon and potassium atoms using polarization labeling (PL) and laser-induced fluorescence (LIF) spectroscopy. In the PL experiment, a circularly polarized pump laser excites a specific NaK A^1&+circ;(v=16, J) <- X^1&+circ;(v=0, J±1) transition, creating an orientation (non-uniform MJ level distribution) in both levels. The linear polarized probe laser is scanned over various 3^1π(v=8, J' ±1) <- A^1&+circ;(v=16, J') transitions. The probe laser passes through a crossed linear polarizer before detection, and signal is recorded if the probe laser polarization has been modified by the vapor (which occurs when it comes into resonance with an oriented level). In addition to strong direct transitions (J' = J), we also observe weak collisional satellite lines (J' = J±n with n = 1, 2, 3, ...) indicating that orientation is transferred to adjacent rotational levels during a collision. An LIF experiment (with linear polarized pump and probe beams) gives information on the collisional transfer of population. From these data, cross sections for both processes can be determined. We experimentally distinguish collisions of NaK with argon atoms from collisions with alkali atoms.

  17. Theoretical calculations of rotationally inelastic collisions of He with NaK(A (1)Σ(+)): Transfer of population, orientation, and alignment.

    PubMed

    Malenda, R F; Price, T J; Stevens, J; Uppalapati, S L; Fragale, A; Weiser, P M; Kuczala, A; Talbi, D; Hickman, A P

    2015-06-14

    We have performed extensive calculations to investigate thermal energy, rotationally inelastic collisions of NaK (A(1)Σ(+)) with He. We determined a potential energy surface using a multi-reference configuration interaction wave function as implemented by the GAMESS electronic structure code, and we have performed coupled channel scattering calculations using the Arthurs and Dalgarno formalism. We also calculate the Grawert coefficients B(λ)(j, j') for each j → j' transition. These coefficients are used to determine the probability that orientation and alignment are preserved in collisions taking place in a cell environment. The calculations include all rotational levels with j or j' between 0 and 50, and total (translational and rotational) energies in the range 0.0002-0.0025 a.u. (∼44-550 cm(-1)). The calculated cross sections for transitions with even values of Δj tend to be larger than those for transitions with odd Δj, in agreement with the recent experiments of Wolfe et al. (J. Chem. Phys. 134, 174301 (2011)). The calculations of the energy dependence of the cross sections and the calculations of the fraction of orientation and alignment preserved in collisions also exhibit distinctly different behaviors for odd and even values of Δj. The calculations also indicate that the average fraction of orientation or alignment preserved in a transition becomes larger as j increases. We interpret this behavior using the semiclassical model of Derouard, which also leads to a simple way of visualizing the distribution of the angles between the initial and final angular momentum vectors j and j'. Finally, we compare the exact quantum results for j → j' transitions with results based on the simpler, energy sudden approximation. That approximation is shown to be quite accurate.

  18. Methamphetamine Use and Sexual Risk Behavior among High School Students in Cape Town, South Africa

    ERIC Educational Resources Information Center

    Pluddemann, Andreas; Flisher, Alan J.; McKetin, Rebecca; Parry, Charles D.; Lombard, Carl J.

    2012-01-01

    Objective: To investigate whether methamphetamine use is associated with sexual risk behavior among adolescents. Method: A cross-sectional survey of 1,561 male and female high school students in Cape Town (mean age 14.9 years) was conducted using items from the Problem Oriented Screening Instrument for Teenagers (POSIT) HIV Risk Scale. Results:…

  19. Callings, Work Role Fit, Psychological Meaningfulness and Work Engagement among Teachers in Zambia

    ERIC Educational Resources Information Center

    Rothmann, Sebastiaan; Hamukang'andu, Lukondo

    2013-01-01

    Our aim in this study was to investigate the relationships among a calling orientation, work role fit, psychological meaningfulness and work engagement of teachers in Zambia. A quantitative approach was followed and a cross-sectional survey was used. The sample (n = 150) included 75 basic and 75 secondary school teachers in the Choma district of…

  20. Gender-Related Differences in the Occupational Aspirations and Career-Style Preferences of Accounting Students: A Cross-Sectional Comparison between Academic School Years

    ERIC Educational Resources Information Center

    Danziger, Nira; Eden, Yoram

    2007-01-01

    Purpose: The purpose of this paper is to examine whether gendered differences in occupational aspirations still appear when considering students with similar abilities who study competitively in the same achievement-oriented educational setting. Design/methodology/approach: The hypotheses stipulated an interaction between gender and year of study…

  1. Attosecond polarization control in atomic RABBITT-like experiments assisted by a circularly polarized laser

    NASA Astrophysics Data System (ADS)

    Boll, D. I. R.; Fojón, O. A.

    2017-12-01

    We study theoretically the single ionization of noble gas atoms by the combined action of an attosecond pulse train with linear polarization and an assistant laser field with circular polarization. We employ a non-perturbative model that under certain approximations gives closed-form expressions for the angular distributions of photoelectrons. Interestingly, our model allow us to interpret these angular distributions as two-centre interferences where the orientation and the modulus of the separation vector between the virtual emitters is governed by the assistant laser field. Additionally, we show that such a configuration of light fields is similar to the polarization control technique, where both the attosecond pulse train and the assistant laser field have linear polarizations whose relative orientation may be controlled. Moreover, in order to compare our results with the available experimental data, we obtain analytical expressions for the cross sections integrated over the photoelectron emission angles. By means of these expressions, we define the ‘magic time’ as the delay for which the total cross sections for atomic targets exhibit the same functional form as the one of the monochromatic photoionization of diatomic molecular targets.

  2. Future Orientation, Social Support, and Psychological Adjustment among Left-behind Children in Rural China: A Longitudinal Study.

    PubMed

    Su, Shaobing; Li, Xiaoming; Lin, Danhua; Zhu, Maoling

    2017-01-01

    Existing research has found that parental migration may negatively impact the psychological adjustment of left-behind children. However, limited longitudinal research has examined if and how future orientation (individual protective factor) and social support (contextual protective factor) are associated with the indicators of psychological adjustment (i.e., life satisfaction, school satisfaction, happiness, and loneliness) of left-behind children. In the current longitudinal study, we examined the differences in psychological adjustment between left-behind children and non-left behind children (comparison children) in rural areas, and explored the protective roles of future orientation and social support on the immediate (cross-sectional effects) and subsequent (lagged effects) status of psychological adjustment for both groups of children, respectively. The sample included 897 rural children ( M age = 14.09, SD = 1.40) who participated in two waves of surveys across six months. Among the participants, 227 were left-behind children with two parents migrating, 176 were with one parent migrating, and 485 were comparison children. Results showed that, (1) left-behind children reported lower levels of life satisfaction, school satisfaction, and happiness, as well as a higher level of loneliness in both waves; (2) After controlling for several demographics and characteristics of parental migration among left-behind children, future orientation significantly predicted life satisfaction, school satisfaction, and happiness in both cross-sectional and longitudinal regression models, as well as loneliness in the longitudinal regression analysis. Social support predicted immediate life satisfaction, school satisfaction, and happiness, as well as subsequent school satisfaction. Similar to left-behind children, comparison children who reported higher scores in future orientation, especially future expectation, were likely to have higher scores in most indicators of psychological adjustment measured at the same time and subsequently. However, social support seemed not exhibit as important in the immediate status of psychological adjustment of comparison children as that of left-behind children. Findings, implications, and limitations of the present study were discussed.

  3. Disclosure of sexual orientation to health professionals in China: results from an online cross-sectional study.

    PubMed

    Tang, Weiming; Mao, Jessica; Tang, Songyuan; Liu, Chuncheng; Mollan, Katie; Cao, Bolin; Wong, Terrence; Zhang, Ye; Hudgens, Michael; Qin, Yilu; Han, Larry; Ma, Baoli; Yang, Bin; Ma, Wei; Wei, Chongyi; Tucker, Joseph D

    2017-02-06

    Many men who have sex with men (MSM) in China are "in the closet." The low rate of disclosure may impact sexual behaviours, testing for HIV and other sexually transmitted infections (STIs), and diseases transmission. This study examines factors associated with overall sexual orientation disclosure and disclosure to healthcare professionals. A nationwide cross-sectional online survey was conducted from September 2014 to October 2014 in China. Participants completed questions covering socio-demographic information, sexual behaviours, HIV/STI testing history, and self-reported HIV status. We defined healthcare professional disclosure as disclosing to a doctor or other medical provider. A total of 1819 men started the survey and 1424 (78.3%) completed it. Among the 1424 participants, 62.2% (886/1424) reported overall disclosure, and 16.3% (232/1424) disclosed to healthcare professionals. In multivariate analyses, the odds of sexual orientation disclosure were 56% higher among MSM who used smartphone-based, sex-seeking applications [adjusted odds ratio (aOR) = 1.56, 95% CI: 1.25-2.95], but were lower among MSM reporting sex while drunk or recreational drug use. The odds of disclosure to a healthcare professional were greater among MSM who had ever tested for HIV or STIs (aOR = 3.36, 95% CI: 2.50-4.51 for HIV, and aOR = 4.92, 95% CI: 3.47-6.96 for STIs, respectively) or self-reported as living with HIV (aOR = 1.59, 95% CI: 0.93-2.72). Over 80% of MSM had not disclosed their sexual orientation to health professionals. This low level of disclosure likely represents a major obstacle to serving the unique needs of MSM in clinical settings. Further research and interventions to facilitate MSM sexual orientation disclosure, especially to health professionals, are urgently needed.

  4. Relationships between Personal Traits, Emotional Intelligence, Internal Marketing, Service Management, and Customer Orientation in Korean Outpatient Department Nurses.

    PubMed

    Kim, Bogyun; Lee, Jia

    2016-03-01

    Current increase and complexity of medical tests and surgical procedures at outpatient department (OPD) require OPD nurses to have customer orientation focusing on various customers' interests and needs. The purpose of this study was to identify the factors associated with customer orientation in nurses working at OPD of hospitals. The study used a descriptive correlational design with cross-sectional survey. The study settings were four general hospitals in Seoul and its metropolitan area. Data were collected from 138 OPD nurses from general hospitals. Study variables were personal traits, emotional intelligence, internal marketing, service management and customer orientation. Factors associated with customer orientation were identified as conscientiousness from personal traits (β = .37, p < .001), emotional intelligence from individual characteristics (β = .21, p = .032), and internal marketing from environmental characteristics (β = .21, p = .001). Hospital administrators should support OPD nurses to cultivate sincere and sociable personal traits and emotional intelligence, and to consider employees as internal customers to improve patient-oriented services and satisfaction. Copyright © 2015. Published by Elsevier B.V.

  5. Measuring the preference towards patient-centred communication with the Chinese-revised Patient-Practitioner Orientation Scale: a cross-sectional study among physicians and patients in clinical settings in Shanghai, China.

    PubMed

    Wang, Jie; Zou, Runyu; Fu, Hua; Qian, Haihong; Yan, Yueren; Wang, Fan

    2017-09-18

    To adapt the Patient-Practitioner Orientation Scale (PPOS), to a Chinese context, and explore the preference towards patient-centred communication among physicians and patients with the Chinese-revised Patient-Practitioner Orientation Scale (CR-PPOS). A cross-sectional questionnaire-based study. Clinical settings from eight medical units, including four community hospitals and four general hospitals, in Shanghai, China. 1018 participants, including 187 physicians and 831 patients, completed this study in two successive stages. Psychometric properties of the CR-PPOS and participants' score on the CR-PPOS. Compared with the original PPOS, the 11-item CR-PPOS obtained better psychometric indices. Physicians and patients scored differently on both the total CR-PPOS and its two subscales. Compared with physicians, the scores of patients were more influenced by their personal characteristics, such as age and education. The CR-PPOS is a better instrument in a Chinese context than the original translated version. The divergence in the extent to which patient-centred communication is preferred among Chinese physicians and patients should be noted. Adapting physicians' communication strategy to patients' preferences based on their personal characteristics can be a viable approach towards improving clinical efficiency. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

  6. (e, 2e) simple ionization of {{\\rm{H}}}_{3}^{+} by fast electron impact: use of triangular three-center continuum and bound state wave functions

    NASA Astrophysics Data System (ADS)

    Obeid, S.; Chuluunbaatar, O.; Joulakian, B. B.

    2017-07-01

    The variation of the multiply differential cross section of the (e, 2e) simple ionization of {{{H}}}3+, with the incident and ejection energy values, as well as the directions of the ejected and scattered electrons, is studied. The calculations have been performed in the frame of the perturbative first Born procedure, which has required the development of equilateral triangular three center bound and continuum state wave functions. The results explore the optimal conditions and the particularities of the triangular targets, such as the appearance of interference patterns in the variation of the four fold differential cross section (FDCS) with the scattering angle for a fixed orientation of the molecule. The comparison between the results obtained by two H3 + ground wave functions, with and without a correlation term r 12, shows that the effect of correlation on the magnitude of the triple differential cross section is not large, but it produces some modification in the structure of the FDCS.

  7. The hydrogen molecule under the reaction microscope: single photon double ionization at maximum cross section and threshold (doubly differential cross sections)

    DOE PAGES

    Weber, Thorsten; Foucar, Lutz; Jahnke, Till; ...

    2017-07-07

    In this paper, we studied the photo double ionization of hydrogen molecules in the threshold region (50 eV) and the complete photo fragmentation of deuterium molecules at maximum cross section (75 eV) with single photons (linearly polarized) from the Advanced Light Source, using the reaction microscope imaging technique. The 3D-momentum vectors of two recoiling ions and up to two electrons were measured in coincidence. We present the kinetic energy sharing between the electrons and ions, the relative electron momenta, the azimuthal and polar angular distributions of the electrons in the body-fixed frame. We also present the dependency of the kineticmore » energy release in the Coulomb explosion of the two nuclei on the electron emission patterns. We find that the electronic emission in the body-fixed frame is strongly influenced by the orientation of the molecular axis to the polarization vector and the internuclear distance as well as the electronic energy sharing. Finally, traces of a possible breakdown of the Born–Oppenheimer approximation are observed near threshold.« less

  8. Arbitrary cross-section SEM-cathodoluminescence imaging of growth sectors and local carrier concentrations within micro-sampled semiconductor nanorods

    PubMed Central

    Watanabe, Kentaro; Nagata, Takahiro; Oh, Seungjun; Wakayama, Yutaka; Sekiguchi, Takashi; Volk, János; Nakamura, Yoshiaki

    2016-01-01

    Future one-dimensional electronics require single-crystalline semiconductor free-standing nanorods grown with uniform electrical properties. However, this is currently unrealistic as each crystallographic plane of a nanorod grows at unique incorporation rates of environmental dopants, which forms axial and lateral growth sectors with different carrier concentrations. Here we propose a series of techniques that micro-sample a free-standing nanorod of interest, fabricate its arbitrary cross-sections by controlling focused ion beam incidence orientation, and visualize its internal carrier concentration map. ZnO nanorods are grown by selective area homoepitaxy in precursor aqueous solution, each of which has a (0001):+c top-plane and six {1–100}:m side-planes. Near-band-edge cathodoluminescence nanospectroscopy evaluates carrier concentration map within a nanorod at high spatial resolution (60 nm) and high sensitivity. It also visualizes +c and m growth sectors at arbitrary nanorod cross-section and history of local transient growth events within each growth sector. Our technique paves the way for well-defined bottom-up nanoelectronics. PMID:26881966

  9. Calculation of photodetachment cross sections and photoelectron angular distributions of negative ions using density functional theory

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Liu, Yuan; Ning, Chuangang, E-mail: ningcg@tsinghua.edu.cn; Collaborative Innovation Center of Quantum Matter, Beijing

    2015-10-14

    Recently, the development of photoelectron velocity map imaging makes it much easier to obtain the photoelectron angular distributions (PADs) experimentally. However, explanations of PADs are only qualitative in most cases, and very limited works have been reported on how to calculate PAD of anions. In the present work, we report a method using the density-functional-theory Kohn-Sham orbitals to calculate the photodetachment cross sections and the anisotropy parameter β. The spherical average over all random molecular orientation is calculated analytically. A program which can handle both the Gaussian type orbital and the Slater type orbital has been coded. The testing calculationsmore » on Li{sup −}, C{sup −}, O{sup −}, F{sup −}, CH{sup −}, OH{sup −}, NH{sub 2}{sup −}, O{sub 2}{sup −}, and S{sub 2}{sup −} show that our method is an efficient way to calculate the photodetachment cross section and anisotropy parameter β for anions, thus promising for large systems.« less

  10. The hydrogen molecule under the reaction microscope: single photon double ionization at maximum cross section and threshold (doubly differential cross sections)

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Weber, Thorsten; Foucar, Lutz; Jahnke, Till

    In this paper, we studied the photo double ionization of hydrogen molecules in the threshold region (50 eV) and the complete photo fragmentation of deuterium molecules at maximum cross section (75 eV) with single photons (linearly polarized) from the Advanced Light Source, using the reaction microscope imaging technique. The 3D-momentum vectors of two recoiling ions and up to two electrons were measured in coincidence. We present the kinetic energy sharing between the electrons and ions, the relative electron momenta, the azimuthal and polar angular distributions of the electrons in the body-fixed frame. We also present the dependency of the kineticmore » energy release in the Coulomb explosion of the two nuclei on the electron emission patterns. We find that the electronic emission in the body-fixed frame is strongly influenced by the orientation of the molecular axis to the polarization vector and the internuclear distance as well as the electronic energy sharing. Finally, traces of a possible breakdown of the Born–Oppenheimer approximation are observed near threshold.« less

  11. Design and implementation of distributed multimedia surveillance system based on object-oriented middleware

    NASA Astrophysics Data System (ADS)

    Cao, Xuesong; Jiang, Ling; Hu, Ruimin

    2006-10-01

    Currently, the applications of surveillance system have been increasingly widespread. But there are few surveillance platforms that can meet the requirement of large-scale, cross-regional, and flexible surveillance business. In the paper, we present a distributed surveillance system platform to improve safety and security of the society. The system is constructed by an object-oriented middleware called as Internet Communications Engine (ICE). This middleware helps our platform to integrate a lot of surveillance resource of the society and accommodate diverse range of surveillance industry requirements. In the follow sections, we will describe in detail the design concepts of system and introduce traits of ICE.

  12. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Yu, Hong, E-mail: h-yu@seu.edu.cn; Chen, Hong-Bo

    In this article, a new semi-continuum model is built to describe the fundamental vibration frequency of the silicon nanowires in <111> orientation. The Keating potential model and the discrete nature in the width and the thickness direction of the silicon nanowires in <111> orientation are applied in the new semi-continuum model. Based on the Keating model and the principle of conservation of energy, the vibration frequency of the silicon nanowires with the triangle, the rhombus, and the hexagon cross sections are derived. It is indicated that the calculation results based on this new model are accordant with the simulation resultsmore » of the software based on molecular dynamics (MD).« less

  13. Controlling laser emission by selecting crystal orientation

    NASA Astrophysics Data System (ADS)

    Chen, Lijuan; Han, Shujuan; Wang, Zhengping; Wang, Jiyang; Zhang, Huanjin; Yu, Haohai; Han, Shuo; Xu, Xinguang

    2013-01-01

    Based on the anisotropy of laser crystal, we demonstrate a method of adjusting laser emission by selecting crystal orientation. When the light propagating direction varies from a to c axis of Nd:LiGd(MoO4)2 crystal, emission wavelength exhibits a sensitive change of 1061 nm → 1061/1062 + 1068 nm → 1068 nm. The experimental discipline is well explained by a theoretical study of simulating on the spatial distribution of stimulated emission cross-section. This letter manifests that the laser property along non-principal-axis direction is also valuable for research and application, which breaks through the traditional custom of using laser materials processed along principal-axis.

  14. Krypton adsorption on rutile: State and cross-sectional area at 77 K

    NASA Astrophysics Data System (ADS)

    Grillet, Y.; Rouquerol, F.; Rouquerol, J.

    1985-10-01

    A krypton adsorption study was carried out on a polycrystalline TiO 2 sample (98.5% rutile) presently considered as a potential reference material for surface areas. Both adsorption microcalorimetry and volumetry show evidence of a two-dimensional phase change (from 2D fluid to 2D solid) taking place at 77 K before the completion of the monolayer. No such phenomenon is observed neither with nitrogen (which we explain by a strong orientation and a close-packing of this molecule on a polar surface) neither with argon (which we explain by a large incompatibility factor between rutile and an argon crystal). On completion of the monolayer, the krypton molecular cross-sectional area is here around 0.15 nm 2 (instead of the usual 0.17 to 0.21 nm 2).

  15. Cross-bedding Related Anisotropy and its Role in the Orientation of Joints in an Aeolian Sandstone

    NASA Astrophysics Data System (ADS)

    Deng, S.; Cilona, A.; Mapeli, C.; Panfilau, A.; Aydin, A.; Prasad, M.

    2014-12-01

    Previous research revealed that the cross-bedding related anisotropy in aeolian sandstones affects the orientation of compaction bands, also known as anticracks. We hypothesize that cross-bedding should a have similar influence on the orientation of the joints within the same rock at the same location. To test this hypothesis, we investigated the relationship between the cross-beds and the cross-bed package confined joints in the Jurassic aeolian Aztec Sandstone cropping out in the Valley of Fire State Park, Nevada. The field data demonstrates that the cross-bed package confined joints occur at high-angle to bedding and trend roughly parallel to the dip direction of the cross-beds. This shows that the cross-bed orientation and the associated anisotropy also exert a strong control on the formation and orientation of the joints. In order to characterize the anisotropy due to cross-bedding in the Aztec Sandstone, we measured the P-wave velocities parallel and perpendicular to bedding from 11 samples in the laboratory using a bench-top ultrasonic assembly. The measured P-wave anisotropy is about 13% on average. Based on these results, a numerical model based on the generalized Hooke's law for anisotropic materials is analyzed assuming the cross-bedded sandstone to be transversely isotropic. Using this model, we tested various cross-bed orientations as well as different strain boundary conditions (uniaxial, axisymmetric and triaxial). It is possible to define a boundary condition under which the modeled results roughly match with the observed relationship between cross-bed package confined joints and cross-beds. These results have important implications for fluid flow through aeolian sandstones in reservoirs and aquifers.

  16. Motivating nurses' organizational citizenship behaviors by customer-oriented perception for evidence-based practice.

    PubMed

    Chang, Ching Sheng; Chang, Hae Ching

    2010-12-01

    There is a gap in the literature about the influence of customer-oriented perception on nursing personnel's organizational citizenship behaviors. Organizational citizenship behaviors are the type of contextual behaviors that are difficult to observe and measure as such behaviors are usually generated in quite subtle and unpredictable ways. This study tested the hypothesis: Customer-oriented perception is associated with increased organizational citizenship behaviors for nurses. If nursing personnel's customer-oriented perception can increase their willingness to display organizational citizenship behaviors, it may facilitate hospital operation and enhance organizational effectiveness. A cross-sectional design using a questionnaire survey of nurses in 10 medical centers was used. Five hundred copies of the questionnaire were distributed, and 232 effective copies were retrieved, with a valid response rate of 46.4%. Structural equation modeling was performed in SPSS 11.0 and Amos 7.0 (SPSS Inc., Chicago, IL, USA) statistical software packages. The main finding was that favorable customer-oriented perception is associated with increased organizational citizenship behaviors for nurses. Extensive training and customer-oriented performance evaluation are proposed in the hope of creating customer-oriented perception among nursing personnel and subsequently inspiring the display of organizational citizenship behaviors. ©2010 Sigma Theta Tau International.

  17. Impact of quantum confinement on transport and the electrostatic driven performance of silicon nanowire transistors at the scaling limit

    NASA Astrophysics Data System (ADS)

    Al-Ameri, Talib; Georgiev, Vihar P.; Sadi, Toufik; Wang, Yijiao; Adamu-Lema, Fikru; Wang, Xingsheng; Amoroso, Salvatore M.; Towie, Ewan; Brown, Andrew; Asenov, Asen

    2017-03-01

    In this work we investigate the impact of quantum mechanical effects on the device performance of n-type silicon nanowire transistors (NWT) for possible future CMOS applications at the scaling limit. For the purpose of this paper, we created Si NWTs with two channel crystallographic orientations <1 1 0> and <1 0 0> and six different cross-section profiles. In the first part, we study the impact of quantum corrections on the gate capacitance and mobile charge in the channel. The mobile charge to gate capacitance ratio, which is an indicator of the intrinsic performance of the NWTs, is also investigated. The influence of the rotating of the NWTs cross-sectional geometry by 90° on charge distribution in the channel is also studied. We compare the correlation between the charge profile in the channel and cross-sectional dimension for circular transistor with four different cross-sections diameters: 5 nm, 6 nm, 7 nm and 8 nm. In the second part of this paper, we expand the computational study by including different gate lengths for some of the Si NWTs. As a result, we establish a correlation between the mobile charge distribution in the channel and the gate capacitance, drain-induced barrier lowering (DIBL) and the subthreshold slope (SS). All calculations are based on a quantum mechanical description of the mobile charge distribution in the channel. This description is based on the solution of the Schrödinger equation in NWT cross sections along the current path, which is mandatory for nanowires with such ultra-scale dimensions.

  18. Supervising Mentors' Lived Experience on Supervision in Teaching, Nursing and Social Care Education. A Participation-Oriented Phenomenological Study

    ERIC Educational Resources Information Center

    Lofmark, Anna; Morberg, Asa; Ohlund, Lennart S.; Ilicki, Julian

    2009-01-01

    Research concerning the supervisor role in separate educational programmes has been undertaken, but cross-professional studies are few. The aim of this study was to explore the lived experience of supervising mentors in Sweden during the practice-based, off-campus sections of the education in teaching, nursing, and social care. The study used a…

  19. Coarse sediment transport dynamics at three spatial scales of bedrock channel bed complexity

    NASA Astrophysics Data System (ADS)

    Goode, J. R.; Wohl, E.

    2007-12-01

    Rivers incised into bedrock in fold-dominated terrain display a complex bed topography that strongly interacts with local hydraulics to produce spatial differences in bed sediment flux. We used painted tracer clasts to investigate how this complex bed topography influences coarse sediment transport at three spatial scales (reach, cross- section and grain). The study was conducted along the Ocoee River gorge, Tennessee between the TVA Ocoee #3 dam and the 1996 Olympic whitewater course. The bed topography consists of undulating bedrock ribs, which are formed at a consistent strike to the bedding and cleavage of the metagreywake and phyllite substrate. Ribs vary in their orientation to flow (from parallel to oblique) and amplitude among three study reaches. These bedrock ribs create a rough bed topography that substantially alters the local flow field and influences reach- scale roughness. In each reach, 300 tracer clasts were randomly selected from the existing bed material. Tracer clasts were surveyed and transport distances were calculated after five scheduled summer releases and a suite of slightly larger but sporadic winter releases. Transport distances were examined as a function of rib orientation and amplitude (reach scale), spatial proximity to bedrock ribs and standard deviation of the bed elevation (cross- section scale), and whether clasts were hydraulically shielded by surrounding clasts, incorporated in the armour layer, imbricated, and/or existed in a pothole, in addition to size and angularity. At the reach scale, where ribs are parallel to flow, lower reach-scale roughness leads to greater sediment transport capacity, sediment flux and transport distances because transport is uninhibited in the downstream direction. Preliminary results indicate that cross section scale characteristics of bed topography exert a greater control on transport distances than grain size.

  20. Trip-oriented travel time prediction (TOTTP) with historical vehicle trajectories

    NASA Astrophysics Data System (ADS)

    Xu, Tao; Li, Xiang; Claramunt, Christophe

    2018-06-01

    Accurate travel time prediction is undoubtedly of importance to both traffic managers and travelers. In highly-urbanized areas, trip-oriented travel time prediction (TOTTP) is valuable to travelers rather than traffic managers as the former usually expect to know the travel time of a trip which may cross over multiple road sections. There are two obstacles to the development of TOTTP, including traffic complexity and traffic data coverage.With large scale historical vehicle trajectory data and meteorology data, this research develops a BPNN-based approach through integrating multiple factors affecting trip travel time into a BPNN model to predict trip-oriented travel time for OD pairs in urban network. Results of experiments demonstrate that it helps discover the dominate trends of travel time changes daily and weekly, and the impact of weather conditions is non-trivial.

  1. Racial Discrimination and Alcohol Use: The Moderating Role of Religious Orientation.

    PubMed

    Parenteau, Stacy C; Waters, Kristen; Cox, Brittany; Patterson, Tarsha; Carr, Richard

    2017-01-02

    An outgrowth of research has established a relationship between racial discrimination and alcohol use, as well as factors that moderate this association. The main objective of this study was to determine if religious orientation moderates the relationship between perceived racial discrimination and alcohol use. This study utilized a cross-sectional data collection strategy to examine the relationship among discrimination, religious orientation, and alcohol use among undergraduate students (N = 349) at a midsize southeastern university. Data was collected in 2014. Participants completed a demographic questionnaire, the General Ethnic Discrimination Scale, the Extrinsic/Intrinsic Religious Orientation Scale-Revised and the Drinking and Drug Habits Questionnaire. Analyses using hierarchical linear regression indicate a significant interaction effect (lifetime discrimination × extrinsic religious orientation) on problem drinking. Additional moderation analyses reveal a significant interaction effect between lifetime discrimination and the extrinsic-personal religious orientation on problem drinking. Results suggest that an extrinsic religious orientation, and particularly, an extrinsic-personal religious orientation, moderates the relationship between lifetime discrimination and problem drinking, suggesting that turning to religion for comfort and protection, rather than for the superficial purpose of seeing/making friends at church, may buffer against the deleterious effects of discrimination-specifically, engaging in problem drinking to cope with the stress of discrimination. Limitations, directions for future research, and clinical implications are discussed.

  2. P-S & S-P Elastic Wave Conversions from Linear Arrays of Oriented Microcracks

    NASA Astrophysics Data System (ADS)

    Jiang, L.; Modiriasari, A.; Bobet, A.; Pyrak-Nolte, L. J.

    2017-12-01

    Natural and induced processes can produce oriented mechanical discontinuities such as en echelon cracks, fractures and faults. Previous research has shown that compressional to shear (P-S) wave conversions occur at normal incidence to a fracture because of cross-coupling fracture compliances (Nakagawa et al., 2000). Here, experiments and computer simulation are presented to demonstrate the link among cross-coupling stiffness, microcrack orientation and energy partitioning among P, S, and P-S/S-P waves. A FormLabs 2 3D printer was used to fabricate 7 samples (50 mm x 50 mm x 100 mm) with linear arrays of microcracks oriented at 0, 15, 30, 45, 60, 75, and 900 with a print resolution of 0.025 mm. The microcracks were elliptical in cross-sections (2 mm long by 1 mm wide), through the 50 mm thickness of sample, and spaced 3 mm (center-to-center for adjacent cracks). A 25 mm length of each sample contained no microcracks to act as a reference material. Broadband transducers (0.2-1.5 MHz) were used to transmit and receive P and polarized S wave signals that were propagated at normal incidence to the linear array of microcracks. P-wave amplitude increased, while S-wave amplitude remained relatively constant, as the microcrack orientation increased from 0o to 90o. At normal incidence, P-S and S-P wave conversions emerged and increased in amplitude as the crack inclination increased from 00 to 450. From 450 to 900, the amplitude of these converted modes decreased. Between negative and positive crack angles, the P-to-S and S-to-P waves were 1800 phase reversed. The observed energy partitioning matched the computed compliances obtained from numerical simulations with ABAQUS. The cross-coupling compliance for cracks inclined at 450 was found to be the smallest magnitude. 3D printing enabled the study of microstructural effects on macro-scale wave measurements. Information on the orientation of microcracks or even en echelon fractures and faults is contained in P-S conversions even at normal incidence. Acknowledgment: This material is based upon work supported by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences, Geosciences Research Program under Award Number (DE-FG02-09ER16022) and by the National Science Foundation, Geomechanics and Geotechnical Systems Program (award No. CMMI-1162082).

  3. Differences in Risky Sexual Behavior According to Sexual Orientation in Korean Adolescents.

    PubMed

    Kim, Ji-Su; Kim, Kyunghee; Kwak, Yeunhee

    2017-10-13

    Adolescents in sexual minority groups are known to be at risk of contracting sexually transmitted diseases through risky sexual behavior. However, few studies have examined associations between sexual orientation and risky sexual behavior and sexually transmitted diseases in Korean adolescents. Therefore, this cross-sectional study used raw data from the Tenth Korea Youth Risk Behavior Web-Based Survey to explore these relationships. Logistic regression analyses were performed to examine the associations between risky sexual behavior and sexual orientation in adolescents. The participants were 6,884 adolescents who provided data regarding demographic characteristics, sexual orientation, and risky sexual behavior. The proportions of homosexual and bisexual subjects who used condoms, engaged in sexual intercourse after drinking alcohol, and experienced sexually transmitted diseases were higher relative to those of heterosexual subjects. Associations between homosexuality and bisexuality and sexually transmitted diseases and engagement in sexual intercourse after drinking remained after multivariate adjustment. Interventions to prevent risky sexual behavior should target sexual orientation, to improve sexual health and prevent sexually transmitted disease in homosexual and bisexual adolescents.

  4. Social inequality and smoking in young Swiss men: intergenerational transmission of cultural capital and health orientation.

    PubMed

    Schori, Dominik; Hofmann, Karen; Abel, Thomas

    2014-04-01

    Smoking is related to income and education and contributes to social inequality in morbidity and mortality. Socialisation theories focus on one's family of origin as regards acquisition of norms, attitudes and behaviours. Aim of this study is to assess associations of daily smoking with health orientation and academic track in young Swiss men. Further, to assess associations of health orientation and academic track with family healthy lifestyle, parents' cultural capital, and parents' economic capital. Cross-sectional data were collected during recruitment for compulsory military service in Switzerland during 2010 and 2011. A structural equation model was fitted to a sample of 18- to 25-year-old Swiss men (N = 10,546). Smoking in young adults was negatively associated with academic track and health orientation. Smoking was negatively associated with parents' cultural capital through academic track. Smoking was negatively associated with health orientation which in turn was positively associated with a healthy lifestyle in the family of origin. Results suggest two different mechanisms of intergenerational transmissions: first, the family transmission path of health-related dispositions, and secondly, the structural transmission path of educational inequality.

  5. The effect of grain orientation on nanoindentation behavior of model austenitic alloy Fe-20Cr-25Ni

    DOE PAGES

    Chen, Tianyi; Tan, Lizhen; Lu, Zizhe; ...

    2017-07-26

    Instrumented nanoindentation was used in this paper to investigate the hardness, elastic modulus, and creep behavior of an austenitic Fe-20Cr-25Ni model alloy at room temperature, with the indented grain orientation being the variant. The samples indented close to the {111} surfaces exhibited the highest hardness and modulus. However, nanoindentation creep tests showed the greatest tendency for creep in the {111} indented samples, compared with the samples indented close to the {001} and {101} surfaces. Scanning electron microscopy and cross-sectional transmission electron microscopy revealed slip bands and dislocations in all samples. The slip band patterns on the indented surfaces were influencedmore » by the grain orientations. Deformation twinning was observed only under the {001} indented surfaces. Finally, microstructural analysis and molecular dynamics modeling correlated the anisotropic nanoindentation-creep behavior with the different dislocation substructures formed during indentation, which resulted from the dislocation reactions of certain active slip systems that are determined by the indented grain orientations.« less

  6. Changes in turbulence with rotation of the omnicarbon prosthesis.

    PubMed

    Travis, Brandon R; Nyboe, Camilla; Christensen, Thomas D; Smerup, Morten; Johansen, Peter; Nygaard, Hans; Hasenkam, J Michael

    2007-01-01

    This study was performed to determine whether annular plane orientation of the Omnicarbon aortic valve influences forward flow turbulence. The Omnicarbon prostheses was modified to allow in situ manual rotation of the valve when implanted in the aortic position of eight 90 kg pigs. Pulsed Doppler ultrasound was used to acquire velocity measurements at 17 locations within the cross-sectional area of the ascending aorta. In each animal, 12 valve rotations were tested in this manner. Reynolds normal stresses were estimated from the velocity measurements. High Reynolds normal stresses were concentrated between left and posterior-right sides of the aortic wall for all orientations studied. No trends in mean or maximum Reynolds normal stresses with respect to valve rotation were consistent in the experiments. Unlike previous experiments with the Medtronic-Hall tilting disc valve, these experiments showed no notable changes in Reynolds normal stress with respect to orientation of the Omnicarbon valve. This suggests that the tendency of turbulent stresses to change with tilting disc valve orientation may be dependent on valve design.

  7. Cellulose nanofiber orientation in nanopaper and nanocomposites by cold drawing.

    PubMed

    Sehaqui, Houssine; Ezekiel Mushi, Ngesa; Morimune, Seira; Salajkova, Michaela; Nishino, Takashi; Berglund, Lars A

    2012-02-01

    To exploit the mechanical potential of native cellulose fibrils, we report on the preparation of nanopaper with preferred orientation of nanofibrillated cellulose (TEMPO-NFC) by cold drawing. The preparation route is papermaking-like and includes vacuum filtering of a TEMPO-oxidated NFC water dispersion, drawing in wet state and drying. The orientation of the fibrils in the nanopaper was assessed by AFM and wide-angle X-ray diffraction analysis, and the effect on mechanical properties of the resulting nanopaper structure was investigated by tensile tests. At high draw ratio, the degree of orientation is as high as 82 and 89% in-the-plane and cross-sectional planes of the nanopaper, respectively, and the Young's modulus is 33 GPa. This is much higher than mechanical properties of isotropic nanopaper. The cold drawing method can be also applied to NFC nanocomposites as demonstrated by preparation of TEMPO-NFC/hydroxyethyl cellulose (HEC) nanocomposites. The introduction of the soft HEC matrix allows further tailoring of the mechanical properties.

  8. Availability and Primary Health Care Orientation of Dementia-Related Services in Rural Saskatchewan, Canada.

    PubMed

    Morgan, Debra G; Kosteniuk, Julie G; Stewart, Norma J; O'Connell, Megan E; Kirk, Andrew; Crossley, Margaret; Dal Bello-Haas, Vanina; Forbes, Dorothy; Innes, Anthea

    2015-01-01

    Community-based services are important for improving outcomes for individuals with dementia and their caregivers. This study examined: (a) availability of rural dementia-related services in the Canadian province of Saskatchewan, and (b) orientation of services toward six key attributes of primary health care (i.e., information/education, accessibility, population orientation, coordinated care, comprehensiveness, quality of care). Data were collected from 71 rural Home Care Assessors via cross-sectional survey. Basic health services were available in most communities (e.g., pharmacists, family physicians, palliative care, adult day programs, home care, long-term care facilities). Dementia-specific services typically were unavailable (e.g., health promotion, counseling, caregiver support groups, transportation, week-end/night respite). Mean scores on the primary health care orientation scales were low (range 12.4 to 17.5/25). Specific services to address needs of rural individuals with dementia and their caregivers are limited in availability and fit with primary health care attributes.

  9. Evaluation of handle design characteristics in a maximum screwdriving torque task.

    PubMed

    Kong, Y-K; Lowe, B D; Lee, S-J; Krieg, E F

    2007-09-01

    The purpose of this study was to evaluate the effects of screwdriver handle shape, surface material and workpiece orientation on torque performance, finger force distribution and muscle activity in a maximum screwdriving torque task. Twelve male subjects performed maximum screw-tightening exertions using screwdriver handles with three longitudinal shapes (circular, hexagonal and triangular), four lateral shapes (cylindrical, double frustum, cone and reversed double frustum) and two surfaces (rubber and plastic). The average finger force contributions to the total hand force were 28.1%, 39.3%, 26.5% and 6.2%, in order from index to little fingers; the average phalangeal segment force contributions were 47.3%, 14.0%, 20.5% and 18.1% for distal, middle, proximal and metacarpal phalanges, respectively. The plastic surface handles were associated with 15% less torque output (4.86 Nm) than the rubber coated handles (5.73 Nm). In general, the vertical workpiece orientation was associated with higher torque output (5.9 Nm) than the horizontal orientation (4.69 Nm). Analysis of handle shapes indicates that screwdrivers designed with a circular or hexagonal cross-sectional shape result in greater torque outputs (5.49 Nm, 5.57 Nm), with less total finger force (95 N, 105 N). In terms of lateral shape, reversed double frustum handles were associated with less torque output (5.23 Nm) than the double frustum (5.44 Nm) and cone (5.37 Nm) handles. Screwdriver handles designed with combinations of circular or hexagonal cross-sectional shapes with double frustum and cone lateral shapes were optimal in this study.

  10. Novel detector design for reducing intercell x-ray cross-talk in the variable resolution x-ray CT scanner: a Monte Carlo study.

    PubMed

    Arabi, Hosein; Asl, Ali Reza Kamali; Ay, Mohammad Reza; Zaidi, Habib

    2011-03-01

    The variable resolution x-ray (VRX) CT scanner provides substantial improvement in the spatial resolution by matching the scanner's field of view (FOV) to the size of the object being imaged. Intercell x-ray cross-talk is one of the most important factors limiting the spatial resolution of the VRX detector. In this work, a new cell arrangement in the VRX detector is suggested to decrease the intercell x-ray cross-talk. The idea is to orient the detector cells toward the opening end of the detector. Monte Carlo simulations were used for performance assessment of the oriented cell detector design. Previously published design parameters and simulation results of x-ray cross-talk for the VRX detector were used for model validation using the GATE Monte Carlo package. In the first step, the intercell x-ray cross-talk of the actual VRX detector model was calculated as a function of the FOV. The obtained results indicated an optimum cell orientation angle of 28 degrees to minimize the x-ray cross-talk in the VRX detector. Thereafter, the intercell x-ray cross-talk in the oriented cell detector was modeled and quantified. The intercell x-ray cross-talk in the actual detector model was considerably high, reaching up to 12% at FOVs from 24 to 38 cm. The x-ray cross-talk in the oriented cell detector was less than 5% for all possible FOVs, except 40 cm (maximum FOV). The oriented cell detector could provide considerable decrease in the intercell x-ray cross-talk for the VRX detector, thus leading to significant improvement in the spatial resolution and reduction in the spatial resolution nonuniformity across the detector length. The proposed oriented cell detector is the first dedicated detector design for the VRX CT scanners. Application of this concept to multislice and flat-panel VRX detectors would also result in higher spatial resolution.

  11. Study of Heavy-ion Induced Fission for Heavy Element Synthesis

    NASA Astrophysics Data System (ADS)

    Nishio, K.; Ikezoe, H.; Hofmann, S.; Ackermann, D.; Aritomo, Y.; Comas, V. F.; Düllmann, Ch. E.; Heinz, S.; Heredia, J. A.; Heßberger, F. P.; Hirose, K.; Khuyagbaatar, J.; Kindler, B.; Kojouharov, I.; Lommel, B.; Makii, M.; Mann, R.; Mitsuoka, S.; Nishinaka, I.; Ohtsuki, T.; Saro, S.; Schädel, M.; Popeko, A. G.; Türler, A.; Wakabayashi, Y.; Watanabe, Y.; Yakushev, A.; Yeremin, A.

    2014-05-01

    Fission fragment mass distributions were measured in heavy-ion induced fission of 238U. The mass distributions changed drastically with incident energy. The results are explained by a change of the ratio between fusion and quasifission with nuclear orientation. A calculation based on a fluctuation dissipation model reproduced the mass distributions and their incident energy dependence. Fusion probability was determined in the analysis. Evaporation residue cross sections were calculated with a statistical model for the reactions of 30Si+238U and 34S+238U using the obtained fusion probability in the entrance channel. The results agree with the measured cross sections of 263,264Sg and 267,268Hs, produced by 30Si+238U and 34S+238U, respectively. It is also suggested that sub-barrier energies can be used for heavy element synthesis.

  12. Single electron impact ionization of the methane molecule

    NASA Astrophysics Data System (ADS)

    Bouamoud, Mammar; Sahlaoui, Mohammed; Benmansour, Nour El Houda; Atomic and Molecular Collisions Team

    2014-10-01

    Triply differential cross sections (TDCS) results of electron-impact ionization of the inner 2a1 molecular orbital of CH4 are presented in the framework of the Second Born Approximation and compared with the experimental data performed in coplanar asymmetric geometry. The cross sections are averaged on the random orientations of the molecular target for accurate comparison with experiments and are compared also with the theoretical calculations of the Three Coulomb wave (3CW) model. Our results are in good agreement with experiments and 3CW results in the binary peak. In contrast the Second Born Approximation yields a significant higher values compared to the 3CW results for the recoil peak and seems to describe suitably the recoil region where higher order effects can occur with the participation of the recoiling ion in the collision process.

  13. Effects of reagent rotational excitation on the H + CHD{sub 3} → H{sub 2} + CD{sub 3} reaction: A seven dimensional time-dependent wave packet study

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Zhang, Zhaojun; Zhang, Dong H., E-mail: zhangdh@dicp.ac.cn

    Seven-dimensional time-dependent wave packet calculations have been carried out for the title reaction to obtain reaction probabilities and cross sections for CHD{sub 3} in J{sub 0} = 1, 2 rotationally excited initial states with k{sub 0} = 0 − J{sub 0} (the projection of CHD{sub 3} rotational angular momentum on its C{sub 3} axis). Under the centrifugal sudden (CS) approximation, the initial states with the projection of the total angular momentum on the body fixed axis (K{sub 0}) equal to k{sub 0} are found to be much more reactive, indicating strong dependence of reactivity on the orientation of the reagentmore » CHD{sub 3} with respect to the relative velocity between the reagents H and CHD{sub 3}. However, at the coupled-channel (CC) level this dependence becomes much weak although in general the K{sub 0} specified cross sections for the K{sub 0} = k{sub 0} initial states remain primary to the overall cross sections, implying the Coriolis coupling is important to the dynamics of the reaction. The calculated CS and CC integral cross sections obtained after K{sub 0} averaging for the J{sub 0} = 1, 2 initial states with all different k{sub 0} are essentially identical to the corresponding CS and CC results for the J{sub 0} = 0 initial state, meaning that the initial rotational excitation of CHD{sub 3} up to J{sub 0} = 2, regardless of its initial k{sub 0}, does not have any effect on the total cross sections for the title reaction, and the errors introduced by the CS approximation on integral cross sections for the rotationally excited J{sub 0} = 1, 2 initial states are the same as those for the J{sub 0} = 0 initial state.« less

  14. Fusion reaction cross-sections using the Wong model within Skyrme energy density based semiclassical extended Thomas Fermi approach

    NASA Astrophysics Data System (ADS)

    Kumar, Raj; Sharma, Manoj K.; Gupta, Raj K.

    2011-11-01

    First, the nuclear proximity potential, obtained by using the semiclassical extended Thomas Fermi (ETF) approach in Skyrme energy density formalism (SEDF), is shown to give more realistic barriers in frozen density approximation, as compared to the sudden approximation. Then, taking advantage of the fact that, in ETF method, different Skyrme forces give different barriers (height, position and curvature), we use the ℓ-summed extended-Wong model of Gupta and collaborators (2009) [1] under frozen densities approximation for calculating the cross-sections, where the Skyrme force is chosen with proper barrier characteristics, not-requiring additional "barrier modification" effects (lowering or narrowing, etc.), for a best fit to data at sub-barrier energies. The method is applied to capture cross-section data from 48Ca + 238U, 244Pu, and 248Cm reactions and to fusion-evaporation cross-sections from 58Ni + 58Ni, 64Ni + 64Ni, and 64Ni + 100Mo reactions, with effects of deformations and orientations of nuclei included, wherever required. Interestingly, whereas the capture cross-sections in Ca-induced reactions could be fitted to any force, such as SIII, SV and GSkI, by allowing a small change of couple of units in deduced ℓ-values at below-barrier energies, the near-barrier data point of 48Ca + 248Cm reaction could not be fitted to ℓ-values deduced for below-barrier energies, calling for a check of data. On the other hand, the fusion-evaporation cross-sections in Ni-induced reactions at sub-barrier energies required different Skyrme forces, representing "modifications of the barrier", for the best fit to data at all incident center-of-mass energies E's, displaying a kind of fusion hindrance at sub-barrier energies. This barrier modification effect is taken into care here by using different Skyrme forces for reactions belonging to different regions of the periodic table. Note that more than one Skyrme force (with identical barrier characteristics) could equally well fit the same data.

  15. A study of commuter air service

    NASA Technical Reports Server (NTRS)

    Belina, F. W.; Bush, L. R.

    1977-01-01

    A regionally oriented overview of the commuter air service industry is provided. A framework for an eventual assessment of potential technology directions that may be of benefit to the industry is presented. Data are provided on the industry's market characteristics, service patterns, patronage characteristics, aircraft and airport needs, economic characteristics and institutional issues. Using personal interview and literature survey methods, investigation of a considerable cross-section of the industry was made.

  16. High average power pockels cell

    DOEpatents

    Daly, Thomas P.

    1991-01-01

    A high average power pockels cell is disclosed which reduces the effect of thermally induced strains in high average power laser technology. The pockels cell includes an elongated, substantially rectangular crystalline structure formed from a KDP-type material to eliminate shear strains. The X- and Y-axes are oriented substantially perpendicular to the edges of the crystal cross-section and to the C-axis direction of propagation to eliminate shear strains.

  17. Lateral Torsional Buckling of Anisotropic Laminated Composite Beams Subjected to Various Loading and Boundary Conditions

    NASA Astrophysics Data System (ADS)

    Ahmadi, Habiburrahman

    Thin-walled structures are major components in many engineering applications. When a thin-walled slender beam is subjected to lateral loads, causing moments, the beam may buckle by a combined lateral bending and twisting of cross-section, which is called lateral-torsional buckling. A generalized analytical approach for lateral-torsional buckling of anisotropic laminated, thin-walled, rectangular cross-section composite beams under various loading conditions (namely, pure bending and concentrated load) and boundary conditions (namely, simply supported and cantilever) was developed using the classical laminated plate theory (CLPT), with all considered assumptions, as a basis for the constitutive equations. Buckling of such type of members has not been addressed in the literature. Closed form buckling expressions were derived in terms of the lateral, torsional and coupling stiffness coefficients of the overall composite. These coefficients were obtained through dimensional reduction by static condensation of the 6x6 constitutive matrix mapped into an effective 2x2 coupled weak axis bending-twisting relationship. The stability of the beam under different geometric and material parameters, like length/height ratio, ply thickness, and ply orientation, was investigated. The analytical formulas were verified against finite element buckling solutions using ABAQUS for different lamination orientations showing excellent accuracy.

  18. Rotationally inelastic collisions of He and Ar with NaK: Experiment and theory

    NASA Astrophysics Data System (ADS)

    Malenda, R. F.; Jones, J.; Faust, C.; Richter, K.; Wolfe, C. M.; Hickman, A. P.; Huennekens, J.; Talbi, D.; Gatti, F.

    2012-06-01

    We are investigating collisions of the ground (X^1&+circ;) and first excited (A^1&+circ;) electronic states of NaK using both experimental and theoretical methods. Potential surfaces for HeNaK (fixed NaK bond length) are used for coupled channel calculations of cross sections for rotational energy transfer and also for collisional transfer of orientation and alignment. Additional calculations use the MCTDH wavepacket method. The measurements of the A state collisions involve a pump--probe excitation scheme using polarization labeling and laser-induced fluorescence spectroscopy. The pump excites a particular ro-vibrational level (v,J) of the A state from the X state, and the probe laser is scanned over various transitions to the 3^1π state. In addition to strong direct transitions, weak satellite lines are observed that arise from collisionally-induced transitions from the (v,J) level to (v,J'=J+δJ). This method provides information about the cross sections for transfer of population and orientation for A state levels, and it can be adapted to transitions starting in the X state. For the A state we observe a strong δJ=even propensity for both He and Ar perturbers. Preliminary results for the X state do not show this propensity.

  19. Radiative transfer theory for active remote sensing of a layer of small ellipsoidal scatterers. [of vegetation

    NASA Technical Reports Server (NTRS)

    Tsang, L.; Kubacsi, M. C.; Kong, J. A.

    1981-01-01

    The radiative transfer theory is applied within the Rayleigh approximation to calculate the backscattering cross section of a layer of randomly positioned and oriented small ellipsoids. The orientation of the ellipsoids is characterized by a probability density function of the Eulerian angles of rotation. The radiative transfer equations are solved by an iterative approach to first order in albedo. In the half space limit the results are identical to those obtained via the approach of Foldy's and distorted Born approximation. Numerical results of the theory are illustrated using parameters encountered in active remote sensing of vegetation layers. A distinctive characteristic is the strong depolarization shown by vertically aligned leaves.

  20. Cross-orientation interactions in human vision.

    PubMed

    Roeber, Urte; Wong, Elaine M Y; Freeman, Alan W

    2008-03-18

    Humans can discriminate one visual contour from another on the basis of small differences in orientation. This capability depends on cortical detectors that are selective for a small range of orientations. We have measured this orientation bandwidth and the suppression that helps to shape it, with a reverse correlation technique. Human subjects were presented with a stream of randomly oriented gratings at a rate of 30 per second. Their task was to press a key whenever they saw an orientation nominated as the target. We analyzed the data by finding the probability density of two orientations: One preceded the key-press by the reaction time, and the second preceded the first by up to 100 ms. The results were as follows: (1) One grating facilitated the following one in producing a key-press when the gratings differed little in orientation. The estimate of orientation bandwidth resulting from this facilitation was 38 degrees . (2) A large angle between the two orientations reduced the probability of a key-press. This finding was best modelled as a suppression that did not vary with orientation, consistent with the idea that cross-orientation suppression is non-oriented. (3) Analysis of non-consecutive grating pairs showed that cross-orientation interactions lasted no longer than 67 ms.

  1. Gay and bisexual male clients' perceptions of counseling: the role of perceived sexual orientation similarity and counselor universal-diverse orientation.

    PubMed

    Stracuzzi, Thomas I; Mohr, Jonathan J; Fuertes, Jairo N

    2011-07-01

    A recurring question in multicultural counseling is whether client-counselor similarity on sociodemographic characteristics benefits counseling. A related issue is how counselor orientation to diversity relates to counseling process and outcome, both as a main effect and in interaction with counselor-client sociodemographic match. This cross-sectional study investigated these questions in relation to gay and bisexual male clients' counseling experiences by examining clients' perceived similarity to their counselor in sexual orientation, as well as counselors' self-reported orientation to diversity (assessed in terms of level of universal-diverse orientation [UDO]). Data were from 83 male-male client-counselor dyads recruited from lesbian/gay/bisexual-affirming counseling practices, where clients identified as gay or bisexual and counselors identified as gay, bisexual, or heterosexual. Counselor UDO was positively and uniquely associated with client ratings of the working alliance, session depth, and session smoothness. Perceived sexual orientation similarity was not directly related to any of the counseling-related criterion variables. Moreover, when counselors reported low levels of UDO, perceived similarity was negatively associated with the client-rated alliance and perceived improvement. Client religious commitment-a control variable in all analyses--was uniquely and negatively associated with client ratings of perceived improvement in counseling.

  2. FLOWS WITH CROSS SECTIONS

    PubMed Central

    Verjovsky, Alberto

    1970-01-01

    Let M be a compact connected C∞-manifold, of dimension n, without boundary. Let ft: M → M be a Cr-flow with cross section. Let Dr(M) be the topological group of diffeomorphisms of M with Cr-topology (1 ≤ r ≤ ∞) and let Dor(M) be its connected component of the identity. Let [unk](M) be the group of I-cobordism classes in Dr(M) generated by orientation-preserving diffeomorphisms. For fεDr(M) denote by [f] its I-cobordism class. Theorem 1 deals with the dependence of M(f) on [f]. Theorem 2: S6 × S1 has at least 28 distinct differentiable structures. Let xoεS1 and let [unk]r be the set of Cr-flows (r ≥ 1) in M × S1 with cross section M × {xo} and inducing in it the identity. Theorem 3: Intuitively to a loop in Dor based at the identity there corresponds a flow in [unk]r, and to homotopic loops correspond isotopic flows. COROLLARY. complete analysis of [unk]r/ [unk] for dim M = 2. Theorems 4 and 5 refer to Anosov flows for dim M > 3. PMID:16591849

  3. An acoustic doppler current profiler survey of flow velocities in Detroit River, a connecting channel of the Great Lakes

    USGS Publications Warehouse

    Holtschlag, David J.; Koschik, John A.

    2003-01-01

    Acoustic Doppler current profilers (ADCP) were used to survey flow velocities in Detroit River from July 8-19, 2002, as part of a study to assess the susceptibility of public water intakes to contaminants on the St. Clair-Detroit River Waterway. More than 3.5 million point velocities were measured at 130 cross sections. Cross sections were generally spaced about 1,800 ft apart along the river from the head of Detroit River at the outlet of Lake St. Clair to the mouth of Detroit River on Lake Erie. Two transects were surveyed at each cross section, one in each direction across the river. Along each transect, velocity profiles were generally obtained 0.8-2.2 ft apart. At each velocity profile, average water velocity data were obtained at 1.64 ft intervals of depth. The raw position and velocity data from the ADCP field survey were adjusted for local magnetic anomalies using global positioning system (GPS) measurements at the end points of the transects. The adjusted velocity and ancillary data can be retrieved though the internet and extracted to column-oriented data files.

  4. Structural analysis using thrust-fault hanging-wall sequence diagrams: Ogden duplex, Wasatch Range, Utah

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Schirmer, T.W.

    1988-05-01

    Detailed mapping and cross-section traverses provide the control for structural analysis and geometric modeling of the Ogden duplex, a complex thrust system exposed in the Wasatch Mountains, east of Ogden, Utah. The structures consist of east-dipping folded thrust faults, basement-cored horses, lateral ramps and folds, and tear faults. The sequence of thrusting determined by means of lateral overlap of horses, thrust-splay relationships, and a top-to-bottom piggyback development is Willard thrust, Ogden thrust, Weber thrust, and Taylor thrust. Major decollement zones occur in the Cambrian shales and limestones. The Tintic Quartzite is the marker for determining gross geometries of horses. Thismore » exposed duplex serves as a good model to illustrate the method of constructing a hanging-wall sequence diagram - a series of longitudinal cross sections that move forward in time and space, and show how a thrust system formed as it moved updip over various footwall ramps. A hanging wall sequence diagram also shows the complex lateral variations in a thrust system and helps to locate lateral ramps, lateral folds, tear faults, and other features not shown on dip-oriented cross sections. 8 figures.« less

  5. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Arabi, Hosein; Asl, Ali Reza Kamali; Ay, Mohammad Reza

    Purpose: The variable resolution x-ray (VRX) CT scanner provides substantial improvement in the spatial resolution by matching the scanner's field of view (FOV) to the size of the object being imaged. Intercell x-ray cross-talk is one of the most important factors limiting the spatial resolution of the VRX detector. In this work, a new cell arrangement in the VRX detector is suggested to decrease the intercell x-ray cross-talk. The idea is to orient the detector cells toward the opening end of the detector. Methods: Monte Carlo simulations were used for performance assessment of the oriented cell detector design. Previously publishedmore » design parameters and simulation results of x-ray cross-talk for the VRX detector were used for model validation using the GATE Monte Carlo package. In the first step, the intercell x-ray cross-talk of the actual VRX detector model was calculated as a function of the FOV. The obtained results indicated an optimum cell orientation angle of 28 deg. to minimize the x-ray cross-talk in the VRX detector. Thereafter, the intercell x-ray cross-talk in the oriented cell detector was modeled and quantified. Results: The intercell x-ray cross-talk in the actual detector model was considerably high, reaching up to 12% at FOVs from 24 to 38 cm. The x-ray cross-talk in the oriented cell detector was less than 5% for all possible FOVs, except 40 cm (maximum FOV). The oriented cell detector could provide considerable decrease in the intercell x-ray cross-talk for the VRX detector, thus leading to significant improvement in the spatial resolution and reduction in the spatial resolution nonuniformity across the detector length. Conclusions: The proposed oriented cell detector is the first dedicated detector design for the VRX CT scanners. Application of this concept to multislice and flat-panel VRX detectors would also result in higher spatial resolution.« less

  6. Contribution of corner reflections from oriented ice crystals to backscattering and depolarization characteristics for off-zenith lidar profiling

    NASA Astrophysics Data System (ADS)

    Borovoi, Anatoli G.; Konoshonkin, Alexander V.; Kustova, Natalia V.; Veselovskii, Igor A.

    2018-06-01

    Backscattering Mueller matrix and the depolarization and color ratios for quasi-horizontally oriented hexagonal ice plates have been calculated within the framework of the physical optics approximation. In the case of a tilted lidar, the dependence of the color and depolarization ratios on polarization of the incident light has been analyzed. It is shown that the corner reflection effect inherent to the pristine hexagonal ice crystals results in sharp peaks of both the backscattering cross section and depolarization ratio at the lidar tilts of about 30° off zenith. The experimental results obtained recently by Veselovskii et al. [13] at the lidar tilt of 43° have been interpreted as a partial manifestation of the corner reflection effect. The retrieval of the vertical profile of the ice crystal fraction consisting of quasi-horizontally oriented hexagonal plates has been demonstrated.

  7. Experiment K305: Quantitative analysis of selected bone parameters. Supplement 3A: Trabecular spacing and orientation in the long bones

    NASA Technical Reports Server (NTRS)

    Judy, M. M.

    1981-01-01

    Values of mean trabecular spacing computed from optical diffraction patterns of 1:1 X-ray micrographs of tibial metaphysis and those obtained by standard image digitization techniques show excellent agreement. Upper limits on values of mean trabecular orientation deduced from diffraction patterns and the images are also in excellent agreement. Values of the ratio of mean trabecular spatial density in a region of 300 micrometers distal to the downwardly directed convexity in the cartilage growth plate to the value adjacent to the plate determined for flight animals sacrificed at recovery were significantly smaller than values for vivarium control animals. No significant differences were found in proximal regions. No significant differences in mean trabecular orientation were detected. Decreased values of trabecular spatial density and of both obsteoblastic activity and trabecular cross-sectional area noted in collateral researches suggest decreased modeling activity under weightlessness.

  8. Examination of soil effect upon GPR detectability of landmine with different orientations

    NASA Astrophysics Data System (ADS)

    Ebrahim, Shereen M.; Medhat, N. I.; Mansour, Khamis K.; Gaber, A.

    2018-06-01

    Landmines represent a serious environmental problem for several countries as it causes severe injured and many victims. In this paper, the response of GPR from different parameters of the landmine targets has been shown and the data is correlated with observed field experiment made in 2012 at Miami Crandon Park test site. The ability of GPR for detecting non-metallic mines with different orientations was revealed and soil effect upon the GPR signal was examined putting into consideration the soil parameters in different locations in Egypt such as in Sinai and El Alamein. The simulation results showed that PMN-2 landmine was detected at 5 cm and 15 cm depths, even at the minimum radar cross section vertical orientation. The B-Scan (2D GPR profiles) of PMN-2 target at 15 cm depth figured out high reflectivity for Wadi deposits due to large contrast between PMN-2 landmine material and soil of sand dunes.

  9. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Chen, Tianyi; Tan, Lizhen; Lu, Zizhe

    Instrumented nanoindentation was used in this paper to investigate the hardness, elastic modulus, and creep behavior of an austenitic Fe-20Cr-25Ni model alloy at room temperature, with the indented grain orientation being the variant. The samples indented close to the {111} surfaces exhibited the highest hardness and modulus. However, nanoindentation creep tests showed the greatest tendency for creep in the {111} indented samples, compared with the samples indented close to the {001} and {101} surfaces. Scanning electron microscopy and cross-sectional transmission electron microscopy revealed slip bands and dislocations in all samples. The slip band patterns on the indented surfaces were influencedmore » by the grain orientations. Deformation twinning was observed only under the {001} indented surfaces. Finally, microstructural analysis and molecular dynamics modeling correlated the anisotropic nanoindentation-creep behavior with the different dislocation substructures formed during indentation, which resulted from the dislocation reactions of certain active slip systems that are determined by the indented grain orientations.« less

  10. Childhood Sex-Typed Behavior and Sexual Orientation: A Conceptual Analysis and Quantitative Review.

    ERIC Educational Resources Information Center

    Bailey, J. Michael; Zucker, Kenneth J.

    1995-01-01

    Reviews research examining the predictive aspects of childhood sex-typed behavior for sexual orientation. Prospective studies suggest that childhood cross-typed behavior is strongly predictive of adult homosexual orientation for men, whereas retrospective studies are useful in determining how many homosexual individuals displayed cross-sex…

  11. A Multidirectional Tribo-System: Wear of UHMWPE under Sliding, Rolling, and Rotation

    NASA Astrophysics Data System (ADS)

    Patten, Elias Wolfgang

    Total knee replacements (TKR) have become a successful surgical procedure for addressing end-stage osteoarthritis, with ultra-high molecular weight polyethylene and cobalt chrome alloy (UHMWPE/Co-Cr) serving as the bearing materials of choice for decades. However, more than 10% of TKRs fail and require revision surgery. The predominant challenge with UHMWPE is the particulate debris generated through wear-mediated processes; wear debris from the UHMWPE tibial bearing surface leading to loosening is still the main cause for post-fifth-year revisions. UHMWPE wear in hip arthroplasty has been linked to microstructural evolution at the surface from multidirectional sliding in the hip joint but little is known about how the microstructure responds to clinically relevant sliding conditions in the knee. This is likely because wear tests are typically performed under basic motion parameters with simplified geometry (pin-on-disk tests) while the knee has more complex kinematics: it is neither a ball-and-socket joint nor a simple hinge joint, but has 2D sliding, rolling/slip motion, and rotation. There is also disagreement over how to best quantify cross-shear and how to model how much wear it will cause. A custom multidirectional tribo-system was used to investigate the individual and combined effects of the different motions in TKR: 2D sliding, rolling, and rotation, for a total of eight separate kinematic conditions. The trends in wear rates and wear factors for these different motions were compared with many different definitions for magnitudes and ratios of cross-shear. Additionally, the wear surfaces were examined for wear mechanism and the microstructural changes in lamellae orientation for the different motions were analyzed. To mimic the tribological conditions of a condyle in a TKR, polished Co-Cr spheres were articulated against flat, smooth UHMWPE disks with physiologically relevant loading, speed, and lubrication conditions. The motion parameters were selected based on the lowest and highest reasonable amounts of cross-shear that each motion type would generate during a realistic gait cycle: a reciprocating line or a "figure 8" with a 15° crossing angle, no rolling or a 0.4 slide-to-roll ratio, and no rotation or a 1°/mm of rotation. The amount of wear was measured with optical profilometry of the cross-section at the middle of the wear scar, after allowing for a resting period for the material creep to recover. To calculate the amount of cross-shear at this cross-section, the sliding interface was simulated with a computer Matlab model. Multiple definitions of cross-shear were used, including the traditional, cycle-based approaches and newer, memory-based approaches. The wear surfaces were examined using optical microscopy and scanning electron microscopy (SEM). The lamellar microstructure at the wear surface and below the wear surface was examined using an oxidizing etch to remove the amorphous phase. The remaining lamellae were imaged using SEM and their orientations and alignment was quantified using an image analysis program. Wear factors were between 0.3 and 8.7 µm2/(Nm/mm), significantly increasing with motion complexity and cross-shear, with the "figure 8" sliding path having the greatest effect. Volumetric wear rates correlated linearly with the total amount of cross-shear, while wear factors correlated linearly with ratios of cross-shear. The best predictors of the wear factor were the normalized crossing intensity and normalized, memory-based cross-shear ratios, with R2 values of 0.98 and 0.97, although many of the cross-shear ratios also had a good linear fits with wear factor. The kinematic parameters in this experiment did not differentiate the various cross-shear parameters enough to conclusively determine which are most appropriate, although some have a stronger theoretical foundation than others. SEM analysis of the wear scar surface revealed slight scratching and instances of rippling and surface cracking perpendicular to the primary sliding directions. These are consistent with abrasive wear, plastic flow and adhesive wear, and fatigue wear mechanisms reported in other in vitro and in vivo wear studies. The orientations of the lamellae at the wear surfaces were not discernibly different from the lamellae of an unworn section of the disk surface. Similarly, the near-surface regions of the disk cross-section were not discernibly different from the subsurface regions. Previous studies have demonstrated orientation of the microstructure during wear using transmission electron microscopy, X-ray scattering, and Fourier transform infrared spectroscopy techniques, and such methods may be necessary for texture characterization. These results demonstrate that knee kinematics have a significant effect on the cross-shear and wear of UHMWPE and should not be neglected when designing TKR. A better theoretical understanding of how kinematics contribute to wear can lead to better UHMWPE formulations, improved computer simulations of wear, and optimized TKR designs with longer life-spans.

  12. Geologic map of the Haji-Gak iron deposit, Bamyan Province, Afghanistan, modified from the 1965 original map compilation of M.S. Smirnov and I.K. Kusov

    USGS Publications Warehouse

    Renaud, Karine M.; Tucker, Robert D.; Peters, Stephen G.; Stettner, Will R.; Masonic, Linda M.; Moran, Thomas W.

    2011-01-01

    This map is a modified version of Geological-structural map of Hajigak iron-ore deposit, scale 1:10,000, which was compiled by M.S. Smirnov and I.K. Kusov in 1965. (Refer to the References Cited section in the Map PDF for complete citations of the original map and a related report.) USGS scientists, in cooperation with the Afghan Geological Survey and the Task Force for Business and Stability Operations of the U.S. Department of Defense, studied the original documents and also visited the field area in November 2009. This modified map illustrates the geological structure of the Haji-Gak iron deposit and includes cross sections of the same area. The map reproduces the topology (contacts, faults, and so forth) of the original Soviet map and cross sections and includes modifications based on our examination of these documents. Elevations on the cross sections are derived from the original Soviet topography and may not match the newer topography used on the current map. We have attempted to translate the original Russian terminology and rock classification into modern English geologic usage as literally as possible without changing any genetic or process-oriented implications in the original descriptions. We also use the age designations from the original map. The unit colors on the map and cross sections differ from the colors shown on the original version. The units are colored according to the color and pattern scheme of the Commission for the Geological Map of the World (CGMW) (http://www.ccgm.org).

  13. Fibrocartilage in various regions of the human glenoid labrum. An immunohistochemical study on human cadavers.

    PubMed

    Ockert, Ben; Braunstein, Volker; Sprecher, Christoph M; Shinohara, Yasushi; Milz, Stefan

    2012-06-01

    The nature and the distribution of fibrocartilage at the human glenoid labrum are unclear, and a better understanding may help to restore its function in open and arthroscopic Bankart repair. Aim of this study was to describe the fibrocartilage extent within the labrum at clinically relevant sites of the glenoid in order to relate the molecular composition of the labrum to its mechanical environment. Twelve fresh frozen human cadaveric shoulders (mean age 38 years) were obtained, and sections perpendicular to the glenoid rim at the 12, 2, 3, 4, 6 and 9 o' clock position were labelled with antibodies against collagen I and II, aggrecan and link protein. A fibrocartilaginous transition zone with a characteristic collagen fibre orientation was found in 81% of cases, evenly distributed (83-92%) around the glenoid rim. The percentage of labrum cross-sectional area comprised of fibrocartilage averaged 28% and ranged from 26% at 12 o'clock on the glenoid clock face to 30% at 3 o'clock. The highest amount of fibrocartilage (82%) was found in the region neighbouring the hyaline articular cartilage. In the region beyond the bony edge of the glenoid, fibrocartilage cross-sectional area did not exceed 12-17%. Fibrocartilage is present at all examined positions around the glenoid rim and constitutes up to 1/3 of the cross-sectional area of the labrum. In turn, the percentage of fibrocartilage in different regions of its cross-section varies considerably. The findings suggest that the penetration of fibrocartilaginous tissue may be reduced by avoiding the highly fibrocartilage transition zone during restoration of labral detachment.

  14. Theoretical calculations of rotationally inelastic collisions of He with NaK(A {sup 1}Σ{sup +}): Transfer of population, orientation, and alignment

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Malenda, R. F.; Price, T. J.; Stevens, J.

    2015-06-14

    We have performed extensive calculations to investigate thermal energy, rotationally inelastic collisions of NaK (A{sup 1}Σ{sup +}) with He. We determined a potential energy surface using a multi-reference configuration interaction wave function as implemented by the GAMESS electronic structure code, and we have performed coupled channel scattering calculations using the Arthurs and Dalgarno formalism. We also calculate the Grawert coefficients B{sub λ}(j, j′) for each j → j′ transition. These coefficients are used to determine the probability that orientation and alignment are preserved in collisions taking place in a cell environment. The calculations include all rotational levels with j ormore » j′ between 0 and 50, and total (translational and rotational) energies in the range 0.0002–0.0025 a.u. (∼44–550 cm{sup −1}). The calculated cross sections for transitions with even values of Δj tend to be larger than those for transitions with odd Δj, in agreement with the recent experiments of Wolfe et al. (J. Chem. Phys. 134, 174301 (2011)). The calculations of the energy dependence of the cross sections and the calculations of the fraction of orientation and alignment preserved in collisions also exhibit distinctly different behaviors for odd and even values of Δj. The calculations also indicate that the average fraction of orientation or alignment preserved in a transition becomes larger as j increases. We interpret this behavior using the semiclassical model of Derouard, which also leads to a simple way of visualizing the distribution of the angles between the initial and final angular momentum vectors j and j′. Finally, we compare the exact quantum results for j → j′ transitions with results based on the simpler, energy sudden approximation. That approximation is shown to be quite accurate.« less

  15. Working conditions and psychotropic drug use: cross-sectional and prospective results from the French national SIP study.

    PubMed

    Lassalle, Marion; Chastang, Jean-François; Niedhammer, Isabelle

    2015-04-01

    Prospective studies exploring the associations between a large range of occupational factors and psychotropic drug use among national samples of workers are seldom. This study investigates the cross-sectional and prospective associations between occupational factors, including a large set of psychosocial work factors, and psychotropic drug use in the national French working population. The study sample comprised 7542 workers for the cross-sectional analysis and 4213 workers followed up for a 4-year period for the prospective analysis. Psychotropic drug use was measured within the last 12 months and defined by the use of antidepressants, anxiolytics or hypnotics. Three groups of occupational factors were explored: classical and emergent psychosocial work factors, working time/hours and physical work exposures. Weighted Poisson regression analyses were performed to adjust for covariates. In the cross-sectional analysis, psychological demands, low social support and hiding emotions were associated with psychotropic drug use. Job insecurity for men and night work for women were associated with psychotropic drug use. In the prospective analysis, hiding emotions and physical exposure were predictive of psychotropic drug use. Dose-response associations were observed for the frequency/intensity of exposure and repeated exposure to occupational factors. This study underlines the role of psychosocial work factors, including emergent factors, in psychotropic drug use. Prevention policies oriented toward psychosocial work factors comprehensively may be useful to reduce this use. Copyright © 2015 Elsevier Ltd. All rights reserved.

  16. Single scan femtosecond laser transverse writing of depressed cladding waveguides enabled by three-dimensional focal field engineering.

    PubMed

    Zhang, Qian; Yang, Dong; Qi, Jia; Cheng, Ya; Gong, Qihuang; Li, Yan

    2017-06-12

    We report single scan transverse writing of depressed cladding waveguides inside ZBLAN glass with the longitudinally oriented annular ring-shaped focal intensity distribution of the femtosecond laser. The entire region of depressed cladding at the cross section, where a negative change of refraction index is induced, can be modified simultaneously with the ring-shaped focal intensity profile. The fabricated waveguides exhibit good single guided mode.

  17. Main types of optical beams giving predominant contributions to the light backscatter for the irregular hexagonal columns

    NASA Astrophysics Data System (ADS)

    Shishko, Victor A.; Konoshonkin, Alexander V.; Kustova, Natalia V.; Borovoi, Anatoli G.

    2017-11-01

    This work presents the estimation of contribution of the main types of optical beams to the light backscatter for randomly oriented hexagonal ice column, the right dihedral angle of which was distorted within the range of 0° (regular particle) to 10°. Calculations were obtained within the physical optics approximation. The wavelength was 532 nm and the refractive index was 1.3116. The results showed that the total contribution of the main types of optical beams to the total backscattering cross section reach the value of 85% at small distortion angle of the hexagonal column and at substantial distortion angle the total contribution of the main types of optical beams decrease up to 55% of the total backscattering cross section. The obtained conclusions can significantly reduce the calculation time in the case when there is no need for high accuracy of the calculation.

  18. Neutral-beam deposition in large, finite-beta noncircular tokamak plasmas

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Wieland, R.M.; Houlberg, W.A.

    1982-02-01

    A parametric pencil beam model is introduced for describing the attenuation of an energetic neutral beam moving through a tokamak plasma. The nonnegligible effects of a finite beam cross section and noncircular shifted plasma cross sections are accounted for in a simple way by using a smoothing algorithm dependent linearly on beam radius and by including information on the plasma flux surface geometry explicitly. The model is benchmarked against more complete and more time-consuming two-dimensional Monte Carlo calculations for the case of a large D-shaped tokamak plasma with minor radius a = 120 cm and elongation b/a = 1.6. Depositionmore » profiles are compared for deuterium beam energies of 120 to 150 keV, central plasma densities of 8 x 10/sup 13/ - 2 x 10/sup 14/ cm/sup -3/, and beam orientation ranging from perpendicular to tangential to the inside wall.« less

  19. Fusion-fission Study at JAEA for Heavy-element Synthesis

    NASA Astrophysics Data System (ADS)

    Nishio, K.

    Fission fragment mass distributions were measured in the heavy-ion induced fission using 238U target nucleus. The mass distribu- tions changed drastically with incident energy. The results are explained by a change of the ratio between fusion and qasifission with nuclear orientation. A calculation based on a fluctuation dissipation model reproduced the mass distributions and their inci- dent energy dependence. Fusion probability was determined in the analysis. Evaporation residue cross sections were calculated with a statistical model in the reactions of 30Si+238U and 34S+238U using the obtained fusion probability in the entrance channel. The results agree with the measured cross sections of 263,264Sg and 267,268Hs, produced by 30Si+238U and 34S+238U, respectively. It is also suggested that the sub-barrier energies can be used for heavy element synthesis.

  20. In-beam fissio study at JAEA for heavy element synthesis

    NASA Astrophysics Data System (ADS)

    Nishio, K.; Ikezoe, H.; Hofmann, S.; Ackermann, D.; Aritomo, Y.; Comas, V. F.; Düllmann, Ch. E.; Heinz, S.; Heredia, J. A.; Heßberger, F. P.; Hirose, K.; Khuyagbaatar, J.; Kindler, B.; Kojouharov, I.; Lommel, B.; Makii, M.; Mann, R.; Mitsuoka, S.; Nishinaka, I.; Ohtsuki, T.; Saro, S.; Schädel, M.; Popeko, A. G.; Türler, A.; Wakabayashi, Y.; Watanabe, Y.; Yakushev, A.; Yeremin, A.

    2013-04-01

    Fission fragment mass distributions were measured in the heavy-ion induced fission using 238U target nucleus. The mass distributions changed drastically with incident energy. The results are explained by a change of the ratio between fusion and qasifission with nuclear orientation. A calculation based on a fluctuation dissipation model reproduced the mass distributions and their incident energy dependence. Fusion probability was determined in the analysis. Evaporation residue cross sections were calculated with a statistical model in the reactions of 30Si+238U and 34S+238U using the obtained fusion probability in the entrance channel. The results agree with the measured cross sections of 263,264Sg and 267,268Hs, produced by 30Si+238U and 34S+238U, respectively. It is also suggested that the sub-barrier energies can be used for heavy element synthesis.

  1. Scientific visualization of volumetric radar cross section data

    NASA Astrophysics Data System (ADS)

    Wojszynski, Thomas G.

    1992-12-01

    For aircraft design and mission planning, designers, threat analysts, mission planners, and pilots require a Radar Cross Section (RCS) central tendency with its associated distribution about a specified aspect and its relation to a known threat, Historically, RCS data sets have been statically analyzed to evaluate a d profile. However, Scientific Visualization, the application of computer graphics techniques to produce pictures of complex physical phenomena appears to be a more promising tool to interpret this data. This work describes data reduction techniques and a surface rendering algorithm to construct and display a complex polyhedron from adjacent contours of RCS data. Data reduction is accomplished by sectorizing the data and characterizing the statistical properties of the data. Color, lighting, and orientation cues are added to complete the visualization system. The tool may be useful for synthesis, design, and analysis of complex, low observable air vehicles.

  2. Measuring Knowledge Integration Learning of Energy Topics: A two-year longitudinal study

    NASA Astrophysics Data System (ADS)

    Liu, Ou Lydia; Ryoo, Kihyun; Linn, Marcia C.; Sato, Elissa; Svihla, Vanessa

    2015-05-01

    Although researchers call for inquiry learning in science, science assessments rarely capture the impact of inquiry instruction. This paper reports on the development and validation of assessments designed to measure middle-school students' progress in gaining integrated understanding of energy while studying an inquiry-oriented curriculum. The assessment development was guided by the knowledge integration framework. Over 2 years of implementation, more than 4,000 students from 4 schools participated in the study, including a cross-sectional and a longitudinal cohort. Results from item response modeling analyses revealed that: (a) the assessments demonstrated satisfactory psychometric properties in terms of reliability and validity; (b) both the cross-sectional and longitudinal cohorts made progress on integrating their understanding energy concepts; and (c) among many factors (e.g. gender, grade, school, and home language) associated with students' science performance, unit implementation was the strongest predictor.

  3. Functional implications of orientation maps in primary visual cortex

    NASA Astrophysics Data System (ADS)

    Koch, Erin; Jin, Jianzhong; Alonso, Jose M.; Zaidi, Qasim

    2016-11-01

    Stimulus orientation in the primary visual cortex of primates and carnivores is mapped as iso-orientation domains radiating from pinwheel centres, where orientation preferences of neighbouring cells change circularly. Whether this orientation map has a function is currently debated, because many mammals, such as rodents, do not have such maps. Here we show that two fundamental properties of visual cortical responses, contrast saturation and cross-orientation suppression, are stronger within cat iso-orientation domains than at pinwheel centres. These differences develop when excitation (not normalization) from neighbouring oriented neurons is applied to different cortical orientation domains and then balanced by inhibition from un-oriented neurons. The functions of the pinwheel mosaic emerge from these local intra-cortical computations: Narrower tuning, greater cross-orientation suppression and higher contrast gain of iso-orientation cells facilitate extraction of object contours from images, whereas broader tuning, greater linearity and less suppression of pinwheel cells generate selectivity for surface patterns and textures.

  4. Vortex-generating coolant-flow-passage design for increased film-cooling effectiveness and surface coverage

    NASA Astrophysics Data System (ADS)

    Papell, S. S.

    1984-11-01

    The thermal film-cooling footprints observed by infrared imagery for three coolant-passage configurations embedded in adiabatic-test plates are discussed. The configurations included a standard round-hole cross section and two orientations of a vortex-generating flow passage. Both orientations showed up to factors of four increases in both film-cooling effectiveness and surface coverage over that obtained with the round coolant passage. The crossflow data covered a range of tunnel velocities from 15.5 to 45 m/sec with blowing rates from 0.20 to 2.05. A photographic streakline flow visualization technique supported the concept of the counterrotating apability of the flow passage design and gave visual credence to its role in inhibiting flow separation.

  5. Vortex-generating coolant-flow-passage design for increased film-cooling effectiveness and surface coverage

    NASA Technical Reports Server (NTRS)

    Papell, S. S.

    1984-01-01

    The thermal film-cooling footprints observed by infrared imagery for three coolant-passage configurations embedded in adiabatic-test plates are discussed. The configurations included a standard round-hole cross section and two orientations of a vortex-generating flow passage. Both orientations showed up to factors of four increases in both film-cooling effectiveness and surface coverage over that obtained with the round coolant passage. The crossflow data covered a range of tunnel velocities from 15.5 to 45 m/sec with blowing rates from 0.20 to 2.05. A photographic streakline flow visualization technique supported the concept of the counterrotating apability of the flow passage design and gave visual credence to its role in inhibiting flow separation.

  6. Sulphur hexaflouride: low energy (e,2e) experiments and molecular three-body distorted wave theory

    NASA Astrophysics Data System (ADS)

    Nixon, Kate L.; Murray, Andrew J.; Chaluvadi, H.; Ning, C. G.; Colgan, James; Madison, Don H.

    2016-10-01

    Experimental and theoretical triple differential ionisation cross-sections (TDCSs) are presented for the highest occupied molecular orbital of sulphur hexafluoride. These measurements were performed in the low energy regime, with outgoing electron energies ranging from 5 to 40 eV in a coplanar geometry, and with energies of 10 and 20 eV in a perpendicular geometry. Complementary theoretical predictions of the TDCS were calculated using the molecular three-body distorted wave formalism. Calculations were performed using a proper average over molecular orientations as well as the orientation-averaged molecular orbital approximation. This more sophisticated model was found to be in closer agreement with the experimental data, however neither model accurately predicts the TDCS over all geometries and energies.

  7. Prosocial motivation and physicians' work attitudes. Effects of a triple synergy on prosocial orientation in a healthcare organization.

    PubMed

    Kim, Young Shin

    2015-01-01

    Employees work attitudes are key determinants to organizational performance. This article proposes a model integrating servant leadership, prosocial motivation, and corporate social responsibility (CSR) in order to explain a mechanism through which prosocial motivation plays a central role in enhanding physicians' work attitudes. A cross sectional survey from a sample of physicians indicates that (1) prosocial motivation can be shaped from servant leadership when physicians perceive high value fit with their supervisors, (2) prosocial motivation improves physicians' job satisfaction. Its effects is strengthened when physicians perceive high CSR, and (3) job satisfaction improves organizational commitment. The results provide meaningful insights that a triple synergy of prosocial orientation among physicians, supervisors and organization enhances physicians' work attitudes.

  8. Measuring Empathy Levels among Kurdish Medical Students in Erbil City, Iraq: Cross-sectional study.

    PubMed

    Raof, Awring M; Yassin, Bervian A

    2016-02-01

    Empathy is a crucial attribute within the physician-patient relationship. This study aimed to evaluate the empathy levels of students in the College of Medicine at Hawler Medical University (HMU) in Erbil city, Iraq. This cross-sectional study took place between January and May 2015 and included all medical undergraduates enrolled at HMU (n = 989). The validated self-administered English language version of the Jefferson Scale of Physician Empathy-Student Version (JSPE-SV) was used to measure empathy levels. Students reported their conformity to each statement of the 20-item questionnaire on a 7-point Likert scale. Levels of empathy were considered directly relative to their final score. A total of 927 students completed the questionnaire (response rate: 93.7%). The male-to-female ratio was 0.72:1 and the mean age was 21.3 ± 1.4 years. The mean empathy score was 101.9 ± 19.2. Female students had significantly higher empathy (P = 0.023) and more frequently chose people-oriented specialties (P = 0.001) than males. First-year students reported the highest mean score (112.9 ± 20.1) while fourth-year students had the lowest (92.7 ± 16.0). There was a significant decline in mean scores between first- and second-year male students (P = 0.020) and first- and fourth-year male students (P = 0.050). Students who chose people-oriented specialties had significantly higher scores than those who chose technology-oriented specialties (P = 0.002). The studied cohort of HMU students demonstrated low empathy levels. As such, the inclusion of empathy instruction in medical school curricula is recommended to promote professionalism and patient welfare.

  9. Quantum Dot-Based Hybrid Nanostructures and Energy Transfer on the Nanoscale for Single- and Multi-Photon Imaging and Cancer Diagnostics

    NASA Astrophysics Data System (ADS)

    Nabiev, Igor

    2017-01-01

    An ideal single-photon (1P) or multiphoton fluorescent nanoprobe should combine a nanocrystal with the largest possible 1P or two-photon (2P) absorption cross section and the smallest possible highly specific recognition molecules conjugated with the nanoparticle in an oriented manner. However, the conditions used for conjugation of typical recognition molecules (conventional antibodies, Abs) with nanoparticles often provoke their unfolding and/or yield nanoprobes with irregular orientation of Abs on the nanoparticle surface. Conjugation of smaller Ab fragments, such as single-domain antibodies (sdAbs), with quantum dots (QDs) in an oriented manner can be considered as an attractive approach to engineering of ultrasmall diagnostic nanoprobes. QDs conjugated to 13-kDa sdAbs derived from camelid IgG or streptavidin have been used as efficient 1P or 2P excitation probes for imaging of cancer markers. The 2P absorption cross sections (TPACSs) for some conjugates are higher than 49,000 GM (Goeppert-Mayer units), which is close to the theoretical value calculated for CdSe QDs and considerably exceeds that of organic dyes. A further step in advanced QD-based cancer diagnostics has been made through implementation of efficient FRET-based imaging with 2P excitation, which has been demonstrated for double immunostaining complexes formed on the surface of cancer cells from sdAb-QD conjugates (donor) and a combination of monoclonal Abs and secondary antibodies labeled with the AlexaFluor dye (acceptor). The proposed approach permits obtaining an exceptional contrast of 2P imaging of cancer biomarkers without any contribution of cell and tissue autofluorescence in the recorded images.

  10. Alignment control and atomically-scaled heteroepitaxial interface study of GaN nanowires.

    PubMed

    Liu, Qingyun; Liu, Baodan; Yang, Wenjin; Yang, Bing; Zhang, Xinglai; Labbé, Christophe; Portier, Xavier; An, Vladimir; Jiang, Xin

    2017-04-20

    Well-aligned GaN nanowires are promising candidates for building high-performance optoelectronic nanodevices. In this work, we demonstrate the epitaxial growth of well-aligned GaN nanowires on a [0001]-oriented sapphire substrate in a simple catalyst-assisted chemical vapor deposition process and their alignment control. It is found that the ammonia flux plays a key role in dominating the initial nucleation of GaN nanocrystals and their orientation. Typically, significant improvement of the GaN nanowire alignment can be realized at a low NH 3 flow rate. X-ray diffraction and cross-sectional scanning electron microscopy studies further verified the preferential orientation of GaN nanowires along the [0001] direction. The growth mechanism of GaN nanowire arrays is also well studied based on cross-sectional high-resolution transmission electron microscopy (HRTEM) characterization and it is observed that GaN nanowires have good epitaxial growth on the sapphire substrate following the crystallographic relationship between (0001) GaN ∥(0001) sapphire and (101[combining macron]0) GaN ∥(112[combining macron]0) sapphire . Most importantly, periodic misfit dislocations are also experimentally observed in the interface region due to the large lattice mismatch between the GaN nanowire and the sapphire substrate, and the formation of such dislocations will favor the release of structural strain in GaN nanowires. HRTEM analysis also finds the existence of "type I" stacking faults and voids inside the GaN nanowires. Optical investigation suggests that the GaN nanowire arrays have strong emission in the UV range, suggesting their crystalline nature and chemical purity. The achievement of aligned GaN nanowires will further promote the wide applications of GaN nanostructures toward diverse high-performance optoelectronic nanodevices including nano-LEDs, photovoltaic cells, photodetectors etc.

  11. Color-Center Production and Formation in Electron-Irradiated Magnesium Aluminate Spinel and Ceria

    DOE PAGES

    Costantini, Jean-Marc; Lelong, Gerald; Guillaumet, Maxime; ...

    2016-06-20

    Single crystals of magnesium aluminate spinel (MgAl2O4) with (100) or (110) orientations and cerium dioxide or ceria (CeO2) were irradiated by 1.0-MeV and 2.5-MeV electrons in a high fluence range. Point-defect production was studied by off-line UV-visible optical spectroscopy after irradiation. For spinel, regardless of both crystal orientation and electron energy, two characteristic broad bands centered at photon energies of 5.4 eV and 4.9 eV were assigned to F and F+ centers (neutral and singly-ionized oxygen vacancies), respectively, on the basis of available literature data. No clear differences in colour-centre formation were observed for the two crystal orientations. Using calculationsmore » of displacement cross sections by elastic collisions, these results are consistent with a very large threshold displacement energy (200 eV) for oxygen atoms at RT. A third very broad band centered at 3.7 eV might be attributed either to an oxygen hole center (V-type center) or an F2 dimer center (oxygen di-vacancy). The onset of recovery of these color centers took place at 200°C with almost full bleaching at 600°C. Activation energies (~0.3-0.4 eV) for defect recovery were deduced from the isochronal annealing data by using a first-order kinetics analysis. For ceria, a sub band-gap absorption feature peaked at ~3.1 eV was recorded for 2.5-MeV electron irradiation only. Assuming a ballistic process, we suggest that the latter defect might result from cerium atom displacement on the basis of computed cross sections.« less

  12. Sexual Orientation Identity Disparities in Awareness and Initiation of the Human Papillomavirus Vaccine Among U.S. Women and Girls: A National Survey.

    PubMed

    Agénor, Madina; Peitzmeier, Sarah; Gordon, Allegra R; Haneuse, Sebastien; Potter, Jennifer E; Austin, S Bryn

    2015-07-21

    Lesbians and bisexual women are at risk for human papillomavirus (HPV) infection from female and male sexual partners. To examine the association between sexual orientation identity and HPV vaccination among U.S. women and girls. Cross-sectional, using 2006-2010 National Survey of Family Growth data. U.S. civilian noninstitutionalized population. The 2006-2010 National Survey of Family Growth used stratified cluster sampling to establish a national probability sample of 12,279 U.S. women and girls aged 15 to 44 years. Analyses were restricted to 3253 women and girls aged 15 to 25 years who were asked about HPV vaccination. Multivariable logistic regression was used to obtain prevalence estimates of HPV vaccine awareness and initiation adjusted for sociodemographic and health care factors for each sexual orientation identity group. Among U.S. women and girls aged 15 to 25 years, 84.4% reported having heard of the HPV vaccine; of these, 28.5% had initiated HPV vaccination. The adjusted prevalence of vaccine awareness was similar among heterosexual, bisexual, and lesbian respondents. After adjustment for covariates, 8.5% (P = 0.007) of lesbians and 33.2% (P = 0.33) of bisexual women and girls who had heard of the vaccine had initiated vaccination compared with 28.4% of their heterosexual counterparts. Self-reported, cross-sectional data, and findings may not be generalizable to periods after 2006 to 2010 or all U.S. lesbians aged 15 to 25 years (because of the small sample size for this group). Adolescent and young adult lesbians may be less likely to initiate HPV vaccination than their heterosexual counterparts. Programs should facilitate access to HPV vaccination services among young lesbians. National Cancer Institute.

  13. Cross-bedding related anisotropy and its interplay with various boundary conditions in the formation and orientation of joints in an aeolian sandstone

    NASA Astrophysics Data System (ADS)

    Deng, Shang; Cilona, Antonino; Morrow, Carolyn; Mapeli, Cesar; Liu, Chun; Lockner, David; Prasad, Manika; Aydin, Atilla

    2015-08-01

    Previous research revealed that the cross-bedding related anisotropy in Jurassic aeolian Aztec Sandstone cropping out in the Valley of Fire State Park, Nevada, affects the orientation of compaction bands, also known as anti-cracks or closing mode structures. We hypothesize that cross-bedding should have a similar influence on the orientation of the opening mode joints within the same rock at the same location. To test this hypothesis, we investigated the relationship between the orientation of cross-beds and the orientation of different categories of joint sets including cross-bed package confined joints and joint zones in the Aztec Sandstone. The field data show that the cross-bed package confined joints occur at high-angle to bedding and trend roughly parallel to the dip direction of the cross-beds. In comparison, the roughly N-S trending joint zones appear not to be influenced by the cross-beds in any significant way but frequently truncate against the dune boundaries. To characterize the anisotropy due to cross-bedding in the Aztec Sandstone, we measured the P-wave velocities parallel and perpendicular to bedding from 11 samples and determined an average P-wave anisotropy to be slightly larger than 13%. From these results, a model based on the generalized Hooke's law for anisotropic materials is used to analyze deformation of cross-bedded sandstone as a transversely isotropic material. In the analysis, the dip angle of cross-beds is assumed to be constant and the strike orientation varying from 0° to 359° in the east (x), north (y), and up (z) coordinate system. We find qualitative agreement between most of the model results and the observed field relations between cross-beds and the corresponding joint sets. The results also suggest that uniaxial extension (εzz > εxx = εyy = 0) and axisymmetric extension (εxx = εyy < εzz and εxx = εyy > εzz) would amplify the influence of cross-bedding associated anisotropy on the joint orientation whereas a triaxial extension (εxx > εyy > εzz) would mitigate this influence. We suggest that the potential implication of different categories of joint sets (i.e., cross-bed package confined joints and joint zones) forming in response to the variation of the boundary conditions (axisymmetric extension and triaxial extension, respectively) and the interplay with the rock anisotropy is significant. These results have important implications for fluid flow through aeolian sandstones in reservoirs and aquifers.

  14. Sexual orientation and self-rated health: the role of social capital, offence, threat of violence, and violence.

    PubMed

    Axelsson, Jakob; Modén, Birgit; Rosvall, Maria; Lindström, Martin

    2013-07-01

    To study the association between sexual orientation and self-rated health, including trust, offence, threat of violence, and violence. DESIGN/SETTING/PARTICIPANTS/MEASUREMENT: The 2008 Public Health Survey in Skåne is a cross-sectional postal questionnaire study. A total of 28,198 persons aged 18-80 years responded (55%). Logistic regressions analysed the association between sexual orientation and self-rated health. 27.4% of all men and 30.0% of all women rated their health as poor. Poor self-rated health was significantly more prevalent in higher age, among immigrants, people with lower education, low social support, low trust, experience of being offended, experience of threat of violence and violence, and bisexual and other orientation. Homosexual and bisexual men and women had higher age-adjusted odds ratios of having felt offended compared to heterosexual respondents. The odds ratios of low trust, threat of violence (men), and experience of violence (women) were significant for respondents with bisexual orientation but not for respondents with homosexual orientation. In the age-adjusted model, no significant association was observed between homosexual orientation and poor self-rated health among women. All other associations between sexual orientation and health were significant in the age-adjusted model but non-significant in the multiple models. Associations between sexual orientation and health disappear after multiple adjustments including trust and experience of offence, threat of violence, and violence. The study suggests that the group with bisexual orientation seems to be more exposed to low social capital (trust), threat of violence, and violence than the group with homosexual orientation.

  15. Numerical prediction of flow induced fibers orientation in injection molded polymer composites

    NASA Astrophysics Data System (ADS)

    Oumer, A. N.; Hamidi, N. M.; Mat Sahat, I.

    2015-12-01

    Since the filling stage of injection molding process has important effect on the determination of the orientation state of the fibers, accurate analysis of the flow field for the mold filling stage becomes a necessity. The aim of the paper is to characterize the flow induced orientation state of short fibers in injection molding cavities. A dog-bone shaped model is considered for the simulation and experiment. The numerical model for determination of the fibers orientation during mold-filling stage of injection molding process was solved using Computational Fluid Dynamics (CFD) software called MoldFlow. Both the simulation and experimental results showed that two different regions (or three layers of orientation structures) across the thickness of the specimen could be found: a shell region which is near to the mold cavity wall, and a core region at the middle of the cross section. The simulation results support the experimental observations that for thin plates the probability of fiber alignment to the flow direction near the mold cavity walls is high but low at the core region. It is apparent that the results of this study could assist in decisions regarding short fiber reinforced polymer composites.

  16. Histological organization and its relationship to function in the femur of Alligator mississippiensis

    PubMed Central

    Lee, Andrew H

    2004-01-01

    Histological analysis of a growth series of alligator femora tests the correlation between strain milieu and microstructure. From mid-diaphyseal cross-sections of these femora (n = 7), vascular canal orientation and density as well as collagen fibre organization were recorded. Throughout ontogeny, the proportion of transverse–spiral (TS) collagen in the dorsal cortex is significantly greater than it is in the ventral cortex (P = 0.008). This regional difference in the proportion of TS collagen is correlated with a regional difference in the state of peak principal strain (compressive or tensile). Nevertheless, the predominant orientation of collagen fibres is longitudinal, which is inconsistent with biomechanical hypotheses that involve peak principal or shear strains. Although the density and orientation of vascular canals do not show significant regional differences (P = 0.26 and P = 0.26, respectively), as with collagen orientation, the vascular canal orientation is predominantly longitudinal. The longitudinal organization of both the vascular canals and the collagen fibres is probably a consequence of longitudinal shifting of subperiosteal osteoid during femoral lengthening. When taken together, these data suggest that growth dynamics is the dominant influence on the histological organization of primary bony tissues in alligator femora. PMID:15032909

  17. Health Psychological Constructs as Predictors of Doping Susceptibility in Adolescent Athletes

    PubMed Central

    Blank, Cornelia; Schobersberger, Wolfgang; Leichtfried, Veronika; Duschek, Stefan

    2016-01-01

    Background Doping is a highly relevant problem in sport, even in adolescent athletes. Knowledge of the psychological factors that influence doping susceptibility in young elite athletes remains sparse. Objectives This study investigated the predictive potential of different health-psychological constructs and well-being on doping susceptibility. The main hypotheses to be tested were positive associations of fear of failure, external locus of control, and ego-oriented goal orientation as well as negative associations of confidence of success, task orientation, internal locus of control, and performance motivation with doping susceptibility. Low levels of well-being are furthermore expected to be associated with doping susceptibility. Methods Within this cross-sectional study, 1,265 Austrian junior athletes aged between 14 and 19 years responded to a paper-pencil questionnaire. Results Performance motivation was a negative, while depressive mood, self-esteem, fear of failure and ego-oriented goal orientation were positive predictors of doping susceptibility. In addition, participants who were offered performance enhancing substances in the past were particularly susceptible to doping. Conclusions The study corroborates the predictive value of classical psychological constructs in doping research, initially analyzed in view of adult athletes, also for adolescents’ doping susceptibility. PMID:28144408

  18. Pushing through evolution? Incidence and fight records of left-oriented fighters in professional boxing history.

    PubMed

    Loffing, Florian; Hagemann, Norbert

    2015-05-01

    The fighting hypothesis proposes that left-oriented athletes enjoy a negative frequency-dependent advantage in combat sports such as boxing. Supporting evidence, however, is restricted to cross-sectional frequency data from small samples. Here, we examined the incidence and fight records of 2,403 left- and right-oriented fighters who were listed in the annual ratings of professional boxing from 1924 to 2012. Unexpectedly, left-oriented boxers were overrepresented in no more than 7 of the 89 years considered, their percentages varied up to 30% and increased over the entire period, and frequencies varied substantially between weight divisions. In support of the fighting hypothesis, lose-win ratios indicated larger fighting strength in left- compared to right-oriented boxers, which, however, was not reflected in different proportions of wins and losses by knockout. Our findings are partly consistent with an assumed left-oriented fighters' advantage in combat sports. Such advantage could be explained by negative frequency-dependent selection mechanisms; however, our study also revealed potential limits of the fighting hypothesis such that alternative explanations cannot be fully excluded. We propose that interference by factors not related to performance could also limit the suitability of data from elite sporting competition for testing evolutionary models of human handedness.

  19. Attempted suicide, psychological health and exposure to harassment among Japanese homosexual, bisexual or other men questioning their sexual orientation recruited via the internet.

    PubMed

    Hidaka, Y; Operario, D

    2006-11-01

    To investigate the rates of attempted suicide and its association with psychological distress, experiences of bullying and verbal harassment, and demographic characteristics among Japanese homosexual, bisexual or other men questioning their sexual orientation. A cross-sectional design using Japanese participants recruited through the internet. Of the 1025 respondents, 154 (15%) of the men reported a history of attempted suicide, 716 (70%) showed high levels of anxiety and 133 (13%) showed high levels of depression. 851 (83%) experienced school bullying and 615 (60%) were verbally harassed because of being perceived by others as homosexual. Independent correlates of attempted suicide were psychological distress, history of being verbally harassed, history of sex with a woman, history of meeting a male through the internet, disclosing sexual orientation to six or more friends and not having a university degree. Mental health services and prevention programmes are needed to deal with the psychological consequences of social stigma for Japanese men who are homosexual, bisexual or questioning their sexual orientation.

  20. The relationship between suicide risk and sexual orientation: results of a population-based study.

    PubMed Central

    Remafedi, G; French, S; Story, M; Resnick, M D; Blum, R

    1998-01-01

    OBJECTIVES: This study examined the relationship between sexual orientation and suicide risk in a population-based sample of adolescents. METHODS: Participants were selected from a cross-sectional, statewide survey of junior and senior public high school students. All males (n = 212) and females (n = 182) who described themselves as bisexual/homosexual were compared with 336 gender-matched heterosexual respondents on three outcome measures: suicidal ideation, intent, and self-reported attempts. Logistic regression analyses were used to examine the association between sexual orientation and outcome measures with adjustment for demographic characteristics. RESULTS: Suicide attempts were reported by 28. 1 % of bisexual/homosexual males, 20.5% of bisexual/homosexual females, 14.5% of heterosexual females, and 4.2% of heterosexual males. For males, but not females, bisexual/homosexual orientation was associated with suicidal intent (odds ratio [OR] = 3.61 95% confidence interval [CI = 1.40, 9.36) and attempts (OR=7.10; 95% CI=3.05, 16.53). CONCLUSIONS: There is evidence of a strong association between suicide risk and bisexuality or homosexuality in males. PMID:9584034

  1. Social Orientation: Problem Behavior and Motivations Toward Interpersonal Problem Solving Among High Risk Adolescents

    PubMed Central

    Kuperminc, Gabriel P.; Allen, Joseph P.

    2006-01-01

    A model of problematic adolescent behavior that expands current theories of social skill deficits in delinquent behavior to consider both social skills and orientation toward the use of adaptive skills was examined in an ethnically and socioeconomically diverse sample of 113 male and female adolescents. Adolescents were selected on the basis of moderate to serious risk for difficulties in social adaptation in order to focus on the population of youth most likely to be targeted by prevention efforts. Structural equation modeling was used to examine cross-sectional data using multiple informants (adolescents, peers, and parents) and multiple methods (performance test and self-report). Adolescent social orientation, as reflected in perceived problem solving effectiveness, identification with adult prosocial values, and self-efficacy expectations, exhibited a direct association to delinquent behavior and an indirect association to drug involvement mediated by demonstrated success in using problem solving skills. Results suggest that the utility of social skill theories of adolescent problem behaviors for informing preventive and remedial interventions can be enhanced by expanding them to consider adolescents’ orientation toward using the skills they may already possess. PMID:16929380

  2. A Tunable Reentrant Resonator with Transverse Orientation of Electric Field for in Vivo EPR Spectroscopy

    NASA Astrophysics Data System (ADS)

    Chzhan, Michael; Kuppusamy, Periannan; Samouilov, Alexandre; He, Guanglong; Zweier, Jay L.

    1999-04-01

    There has been a need for development of microwave resonator designs optimized to provide high sensitivity and high stability for EPR spectroscopy and imaging measurements ofin vivosystems. The design and construction of a novel reentrant resonator with transversely oriented electric field (TERR) and rectangular sample opening cross section for EPR spectroscopy and imaging ofin vivobiological samples, such as the whole body of mice and rats, is described. This design with its transversely oriented capacitive element enables wide and simple setting of the center frequency by trimming the dimensions of the capacitive plate over the range 100-900 MHz with unloadedQvalues of approximately 1100 at 750 MHz, while the mechanical adjustment mechanism allows smooth continuous frequency tuning in the range ±50 MHz. This orientation of the capacitive element limits the electric field based loss of resonatorQobserved with large lossy samples, and it facilitates the use of capacitive coupling. Both microwave performance data and EPR measurements of aqueous samples demonstrate high sensitivity and stability of the design, which make it well suited forin vivoapplications.

  3. Aeroelastic modeling of composite rotor blades with straight and swept tips

    NASA Technical Reports Server (NTRS)

    Yuan, Kuo-An; Friedmann, Peretz P.; Venkatesan, Comandur

    1992-01-01

    This paper presents an analytical study of the aeroelastic behavior of composite rotor blades with straight and swept tips. The blade is modeled by beam type finite elements. A single finite element is used to model the swept tip. The nonlinear equations of motion for the FEM are derived using Hamilton's principle and based on a moderate deflection theory and accounts for: arbitrary cross-sectional shape, pretwist, generally anisotropic material behavior, transverse shears and out-of-plane warping. Numerical results illustrating the effects of tip sweep, anhedral and composite ply orientation on blade aeroelastic behavior are presented. It is shown that composite ply orientation has a substantial effect on blade stability. At low thrust conditions, certain ply orientations can cause instability in the lag mode. The flap-torsion coupling associated with tip sweep can also induce aeroelastic instability in the blade. This instability can be removed by appropriate ply orientation in the composite construction. These results illustrate the inherent potential for aeroelastic tailoring present in composite rotor blades with swept tips, which still remains to be exploited in the design process.

  4. Finite element analysis of a composite crash box subjected to low velocity impact

    NASA Astrophysics Data System (ADS)

    Shaik Dawood, M. S. I.; Ghazilan, A. L. Ahmad; Shah, Q. H.

    2017-03-01

    In this work, finite element analyses using LS-DYNA had been carried out to investigate the energy absorption capability of a composite crash box. The analysed design incorporates grooves to the cross sectional shape and E-Glass/Epoxy as design material. The effects of groove depth, ridge lines, plane width, material properties, wall thickness and fibre orientation had been quantitatively analysed and found to significantly enhance the energy absorption capability of the crash box.

  5. Synchrotron x-ray microdiffraction reveals intrinsic structural features of amyloid deposits in situ.

    PubMed

    Briki, Fatma; Vérine, Jérôme; Doucet, Jean; Bénas, Philippe; Fayard, Barbara; Delpech, Marc; Grateau, Gilles; Riès-Kautt, Madeleine

    2011-07-20

    Amyloidoses are increasingly recognized as a major public health concern in Western countries. All amyloidoses share common morphological, structural, and tinctorial properties. These consist of staining by specific dyes, a fibrillar aspect in electron microscopy and a typical cross-β folding in x-ray diffraction patterns. Most studies that aim at deciphering the amyloid structure rely on fibers generated in vitro or extracted from tissues using protocols that may modify their intrinsic structure. Therefore, the fine details of the in situ architecture of the deposits remain unknown. Here, we present to our knowledge the first data obtained on ex vivo human renal tissue sections using x-ray microdiffraction. The typical cross-β features from fixed paraffin-embedded samples are similar to those formed in vitro or extracted from tissues. Moreover, the fiber orientation maps obtained across glomerular sections reveal an intrinsic texture that is correlated with the glomerulus morphology. These results are of the highest importance to understanding the formation of amyloid deposits and are thus expected to trigger new incentives for tissue investigation. Moreover, the access to intrinsic structural parameters such as fiber size and orientation using synchrotron x-ray microdiffraction, could provide valuable information concerning in situ mechanisms and deposit formation with potential benefits for diagnostic and therapeutic purposes. Copyright © 2011 Biophysical Society. Published by Elsevier Inc. All rights reserved.

  6. Instruments and methods acoustic televiewer logging in glacier boreholes

    USGS Publications Warehouse

    Morin, R.H.; Descamps, G.E.; Cecil, L.D.

    2000-01-01

    The acoustic televiewer is a geophysical logging instrument that is deployed in a water-filled borehole and operated while trolling. It generates a digital, magnetically oriented image of the borehole wall that is developed from the amplitudes and transit times of acoustic waves emitted from the tool and reflected at the water-wall interface. The transit-time data are also converted to radial distances, from which cross-sectional views of the borehole shape can be constructed. Because the televiewer is equipped with both a three-component magnetometer and a two-component inclinometer, the borehole's trajectory in space is continuously recorded as well. This instrument is routinely used in mining and hydrogeologic applications, but in this investigation it was deployed in two boreholes drilled into Upper Fremont Glacier, Wyoming, U.S.A. The acoustic images recorded in this glacial setting are not as clear as those typically obtained in rocks, due to a lower reflection coefficient for water and ice than for water and rock. Results indicate that the depth and orientation of features intersecting the boreholes can be determined, but that interpreting their physical nature is problematic and requires corroborating information from inspection of cores. Nevertheless, these data can provide some insight into englacial structural characteristics. Additional information derived from the cross-sectional geometry of the borehole, as well as from its trajectory, may also be useful in studies concerned with stress patterns and deformation processes.

  7. Usual source of care and the quality of medical care experiences: a cross-sectional survey of patients from a Taiwanese community.

    PubMed

    Tsai, Jenna; Shi, Leiyu; Yu, Wei-Lung; Lebrun, Lydie A

    2010-07-01

    This study used a recent patient survey to examine the relationship between having a usual source of care (USC) and the quality of ambulatory medical care experiences in Taiwan, where there is universal health insurance coverage. The study design was a cross-sectional survey of 879 patients in Taichung County, Taiwan. Children and adults visiting hospital-based physicians were included. Quality of care was measured using items from the Primary Care Assessment Tool (PCAT), representing 7 ambulatory medical care domains: first contact (ie, access and utilization), longitudinality (ie, ongoing care), coordination (ie, referrals and information systems), comprehensiveness (ie, services available and provided), family centeredness, community orientation, and cultural competence. USC was defined based on responses to 3 survey items from the PCAT. Having a USC was significantly associated with higher quality of medical care experiences. Specifically, having a USC was associated with improved accessibility and utilization, ongoing care, coordination of referrals, and healthcare providers' family centeredness and cultural competence. However, having a USC was not strongly related with comprehensiveness of services, coordination of information systems, or healthcare providers' community orientation. In a region with universal health insurance, patients with a USC reported higher quality of medical care experiences compared with those without a USC. Beyond the provision of health insurance coverage, efforts to improve quality of care should include policies promoting USC.

  8. Cortical Structure of Hallucal Metatarsals and Locomotor Adaptations in Hominoids

    PubMed Central

    Jashashvili, Tea; Dowdeswell, Mark R.; Lebrun, Renaud; Carlson, Kristian J.

    2015-01-01

    Diaphyseal morphology of long bones, in part, reflects in vivo loads experienced during the lifetime of an individual. The first metatarsal, as a cornerstone structure of the foot, presumably expresses diaphyseal morphology that reflects loading history of the foot during stance phase of gait. Human feet differ substantially from those of other apes in terms of loading histories when comparing the path of the center of pressure during stance phase, which reflects different weight transfer mechanisms. Here we use a novel approach for quantifying continuous thickness and cross-sectional geometric properties of long bones in order to test explicit hypotheses about loading histories and diaphyseal structure of adult chimpanzee, gorilla, and human first metatarsals. For each hallucal metatarsal, 17 cross sections were extracted at regularly-spaced intervals (2.5% length) between 25% and 65% length. Cortical thickness in cross sections was measured in one degree radially-arranged increments, while second moments of area were measured about neutral axes also in one degree radially-arranged increments. Standardized thicknesses and second moments of area were visualized using false color maps, while penalized discriminant analyses were used to evaluate quantitative species differences. Humans systematically exhibit the thinnest diaphyseal cortices, yet the greatest diaphyseal rigidities, particularly in dorsoplantar regions. Shifts in orientation of maximum second moments of area along the diaphysis also distinguish human hallucal metatarsals from those of chimpanzees and gorillas. Diaphyseal structure reflects different loading regimes, often in predictable ways, with human versus non-human differences probably resulting both from the use of arboreal substrates by non-human apes and by differing spatial relationships between hallux position and orientation of the substrate reaction resultant during stance. The novel morphological approach employed in this study offers the potential for transformative insights into form-function relationships in additional long bones, including those of extinct organisms (e.g., fossils). PMID:25635768

  9. The association between cultural orientation and drinking behaviors among university students in Wuhan, China.

    PubMed

    Tang, Hongxiu; Cai, Weibin; Wang, Hongjing; Zhang, Qing; Qian, Ling; Shell, Duane F; Newman, Ian M; Yin, Ping

    2013-01-01

    This study examines the association between cultural orientation and drinking behaviors among university students. Cultural orientation is the measure of how the cultural values of individuals living in their own society are influenced by cultural values introduced from the outside. In 2011, a cross-sectional survey collected data from 1279 university students from six universities in central China. Participants used a likert scale to rank a series of statements reflecting cultural values from the previously validated Chinese Cultural Orientation Scale and answered questions about their drinking behaviors and socio-demographic characteristics. Statistically significant differences in cultural orientation were observed for gender, hometown and type of university attendance. Traditional-oriented students were more likely to be occasional drinkers or nondrinkers, while marginal-oriented students, bicultural-oriented students and western-oriented students were more likely to be regular drinkers. Bicultural orientation (OR = 1.80, P<0.05) and marginal orientation (OR = 1.64, P<0.05) increased the likelihood of the student being regular drinking, compared to students with traditional orientations. Males (OR = 4.40, P<0.05) had a higher likelihood of regular drinking than females, graduate students (OR = 2.59, P<0.05) had a higher likelihood of regular drinking than undergraduates, students from urban areas (OR = 1.79, P<0.05) had a higher likelihood of regular drinking than those from towns/rural areas, and students attending key universities (OR = 0.48, P<0.05) had a lower likelihood of regular drinking than those attending general universities. Cultural orientation influences drinking behaviors. Traditional cultural orientation was associated with less drinking while western cultural orientation, marginal cultural orientation and bicultural orientation were associated with more drinking. The role of gender, hometown and university attendance is partially moderated through the influence of cultural orientation. The relationship between a traditional cultural orientation and alcohol drinking suggests that traditional Chinese cultural values should be examined for their role in possibly reducing alcohol-related risks through education and policy initiatives.

  10. Geologic map of the Khanneshin carbonatite complex, Helmand Province, Afghanistan, modified from the 1976 original map compilation of V.G. Cheremytsin

    USGS Publications Warehouse

    Tucker, Robert D.; Peters, Stephen G.; Schulz, Klaus J.; Renaud, Karine M.; Stettner, Will R.; Masonic, Linda M.; Packard, Patricia H.

    2011-01-01

    This map is a modified version of the Geological map of the Khanneshin carbonatite complex, scale 1:10,000, which was compiled by V.G. Cheremytsin in 1976. Scientists from the U.S. Geological Survey, in cooperation with the Afghan Geological Survey and the Task Force for Business and Stability Operations of the U.S. Department of Defense, studied the original map and also visited the field area in September 2009, August 2010, and February 2011. This modified map, which includes cross sections, illustrates the geologic structure of the Khanneshin carbonatite complex. The map reproduces the topology (contacts, faults, and so forth) of the original Soviet map and cross sections and includes modifications based on our examination of that map and a related report, and based on observations made during our field visits. (Refer to the References section in the Map PDF for complete citations of the original map and related report.) Elevations on the cross section are derived from the original Soviet topography and may not match the newer topography used on the current map. We have attempted to translate the original Russian terminology and rock classification into modern English geologic usage as literally as possible without changing any genetic or process-oriented implications in the original descriptions. We also use the age designations from the original map. The unit colors on the map and cross sections differ from the colors shown on the original version. The units are colored according to the color and pattern scheme of the Commission for the Geological Map of the World (CGMW) (http://www.ccgm.org).

  11. Geologic map of the western Haji-Gak iron deposit, Bamyan Province, Afghanistan, modified from the 1965 original map compilation of V.V. Reshetniak and I.K. Kusov

    USGS Publications Warehouse

    Renaud, Karine M.; Tucker, Robert D.; Peters, Stephen G.; Stettner, Will R.; Masonic, Linda M.; Moran, Thomas W.

    2011-01-01

    This map is a modified version of Geologic-prospecting plan of western area of Hajigak iron-ore deposit, scale 1:2,000, which was compiled by V.V. Reshetniak and I.K. Kusov in 1965. (Refer to the References Cited section in the Map PDF for complete citations of the original map and related reports.) USGS scientists, in cooperation with the Afghan Geological Survey and the Task Force for Business and Stability Operations of the U.S. Department of Defense, studied the original documents and also visited the field area in November 2009. This modified map illustrates the geological structure of the western Haji-Gak iron deposit and includes cross sections of the same area. The map reproduces the topology (contacts, faults, and so forth) of the original Soviet map and includes modifications based on our examination of that document. We constructed the cross sections from data derived from the original map. Elevations on the cross sections are derived from the original Soviet topography and may not match the newer topography used on the current map. We have attempted to translate the original Russian terminology and rock classification into modern English geologic usage as literally as possible without changing any genetic or process-oriented implications in the original descriptions. We also use the age designations from the original map. The unit colors on the map and cross sections differ from the colors shown on the original version. The units are colored according to the color and pattern scheme of the Commission for the Geological Map of the World (CGMW) (http://www.ccgm.org).

  12. The relationship between temperament and sexual orientation.

    PubMed

    Guerim, Laura D; de Carvalho, Hudson W; Lara, Diogo R

    2015-04-01

    The relationship between temperament and sexual orientation has been poorly characterized. We have used the Affective and Emotional Composite Temperament (AFECT) model to evaluate this association in a large population sample. Data from 16,571 subjects between 21 and 45 years old (mean age=29.1±6.3 yrs, 69.4% females) was collected anonymously through Internet in Brazil. Regarding affective temperaments, male cyclothymics and dysphorics had the lowest percentage of people with heterosexual orientation and the highest percentages of people with bisexual and homosexual orientations. The opposite profile was observed in hyperthymic and euthymic types. Among females, the volatile, cyclothymic, apathetic, disinhibited and euphoric types were less often observed in people with "pure" heterosexual orientation and more often in people with bisexual orientation. In men only, homosexuality was more common among the depressive, cyclothymic and dyphorics temperaments. Emotional trait analysis showed that heterosexual subjects differed statistically from all other groups by having higher scores of coping and stability and lower scores of sensitivity and desire. Overall, the effect sizes were small to moderate, with the largest differences between "pure" heterosexuals and people with bisexual orientation, particularly in women. Subjects with heterosexual orientation who have had homosexual experience and those with homosexual orientation presented intermediate scores. Cross-sectional design, lack of potentially important covariates (e.g., maltreatment) and data collected by Internet only. Externalized and unstable traits were associated mainly with bisexuality. The group of heterosexuals with homosexual fantasies or experiences offers a new approach for the study of sexual orientation. Copyright © 2015 Elsevier B.V. All rights reserved.

  13. Age-related differences in moral identity across adulthood.

    PubMed

    Krettenauer, Tobias; Murua, Lourdes Andrea; Jia, Fanli

    2016-06-01

    In this study, age-related differences in adults' moral identity were investigated. Moral identity was conceptualized a context-dependent self-structure that becomes differentiated and (re)integrated in the course of development and that involves a broad range of value-orientations. Based on a cross-sectional sample of 252 participants aged 14 to 65 years (148 women, M = 33.5 years, SD = 16.9) and a modification of the Good Self-Assessment, it was demonstrated that mean-level of moral identity (averaged across the contexts of family, school/work, and community) significantly increased in the adult years, whereas cross-context differentiation showed a nonlinear trend peaking at the age of 25 years. Value-orientations that define individuals' moral identity shifted so that self-direction and rule-conformity became more important with age. Age-related differences in moral identity were associated with, but not fully attributable to changes in personality traits. Overall, findings suggest that moral identity development is a lifelong process that starts in adolescence but expands well into middle age. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

  14. Physical activity after myocardial infarction: is it related to mental health?

    PubMed

    Rius-Ottenheim, Nathaly; Geleijnse, Johanna M; Kromhout, Daan; van der Mast, Roos C; Zitman, Frans G; Giltay, Erik J

    2013-06-01

    Physical inactivity and poor mental wellbeing are associated with poorer prognoses in patients with cardiovascular disease. We aimed to analyse the cross-sectional and prospective associations between physical activity and mental wellbeing in patients with a history of myocardial infarction. Longitudinal, observational study. We investigated 600 older subjects with a history of myocardial infarction (age range 60-80 years) who participated in the Alpha Omega Trial (AOT). They were tested twice at baseline and at 40 months follow-up for physical activity - with the Physical Activity Scale for the Elderly (PASE); depressive symptoms - with the Geriatric Depression Scale (GDS-15); and dispositional optimism - with the Life Orientation Test (LOT-R). Linear (multilevel) and logistic regression analyses were used to examine cross-sectional and longitudinal associations. Physical activity was cross-sectionally associated with depressive symptoms (adjusted beta = -0.143; p = 0.001), but not with dispositional optimism (adjusted beta = 0.074; p = 0.07). We found a synchrony of change between physical activity and depressive symptoms (adjusted beta = -0.155; p < 0.001), but not with dispositional optimism (adjusted beta = 0.049; p = 0.24). Baseline physical activity did not predict depressive symptoms at 40 months follow-up. Concordant inverse associations were observed for (changes) in physical activity and depressive symptoms. Physical activity did not predict depressive symptoms or low optimism.

  15. Direct observation of subunit exchange along mature vimentin intermediate filaments.

    PubMed

    Nöding, Bernd; Herrmann, Harald; Köster, Sarah

    2014-12-16

    Actin filaments, microtubules, and intermediate filaments (IFs) are central elements of the metazoan cytoskeleton. At the molecular level, the assembly mechanism for actin filaments and microtubules is fundamentally different from that of IFs. The former two types of filaments assemble from globular proteins. By contrast, IFs assemble from tetrameric complexes of extended, half-staggered, and antiparallel oriented coiled-coils. These tetramers laterally associate into unit-length filaments; subsequent longitudinal annealing of unit-length filaments yields mature IFs. In vitro, IFs form open structures without a fixed number of tetramers per cross-section along the filament. Therefore, a central question for the structural biology of IFs is whether individual subunits can dissociate from assembled filaments and rebind at other sites. Using the fluorescently labeled IF-protein vimentin for assembly, we directly observe and quantitatively determine subunit exchange events between filaments as well as with soluble vimentin pools. Thereby we demonstrate that the cross-sectional polymorphism of donor and acceptor filaments plays an important role. We propose that in segments of donor filaments with more than the standard 32 molecules per cross-section, subunits are not as tightly bound and are predisposed to be released from the filament. Copyright © 2014 The Authors. Published by Elsevier Inc. All rights reserved.

  16. Radiation characteristics and effective optical properties of dumbbell-shaped cyanobacterium Synechocystis sp.

    NASA Astrophysics Data System (ADS)

    Heng, Ri-Liang; Pilon, Laurent

    2016-05-01

    This study presents experimental measurements of the radiation characteristics of unicellular freshwater cyanobacterium Synechocystis sp. during their exponential growth in F medium. Their scattering phase function at 633 nm average spectral absorption and scattering cross-sections between 400 and 750 nm were measured. In addition, an inverse method was used for retrieving the spectral effective complex index of refraction of overlapping or touching bispheres and quadspheres from their absorption and scattering cross-sections. The inverse method combines a genetic algorithm and a forward model based on Lorenz-Mie theory, treating bispheres and quadspheres as projected area and volume-equivalent coated spheres. The inverse method was successfully validated with numerically predicted average absorption and scattering cross-sections of suspensions consisting of bispheres and quadspheres, with realistic size distributions, using the T-matrix method. It was able to retrieve the monomers' complex index of refraction with size parameter up to 11, relative refraction index less than 1.3, and absorption index less than 0.1. Then, the inverse method was applied to retrieve the effective spectral complex index of refraction of Synechocystis sp. approximated as randomly oriented aggregates consisting of two overlapping homogeneous spheres. Both the measured absorption cross-section and the retrieved absorption index featured peaks at 435 and 676 nm corresponding to chlorophyll a, a peak at 625 nm corresponding to phycocyanin, and a shoulder around 485 nm corresponding to carotenoids. These results can be used to optimize and control light transfer in photobioreactors. The inverse method and the equivalent coated sphere model could be applied to other optically soft particles of similar morphologies.

  17. How the 'warped' relationships between nurses' emotions, attitudes, social support and perceived organizational conditions impact customer orientation.

    PubMed

    Gountas, Sandra; Gountas, John

    2016-02-01

    Much research focuses on organizational culture and its impact on customer orientation or emotional states and their impact on job satisfaction and well-being. This study aims to combine the complex roles of nurses' emotion states and job satisfaction in a model that identifies the effects of standards for service delivery (organizational culture), supervisor and co-worker support and the development of customer orientation. A previous study examined the relationships between nurses' personal resources, job satisfaction and customer orientation. This study examines how these variables relate to organizational standards and social support. A cross-sectional survey using a self-completion questionnaire with validated, existing scales to measure standards for service delivery, supervisor and co-worker support, job satisfaction, empathic concern, emotional exhaustion and customer orientation. Nurses (159) completed the questionnaire in 2010. The data were analysed using WarpPLS, a structural equation modelling software package. The results indicate that the final model fits the data well and explains 84% of the variance in customer orientation. The findings show the importance of standard for service delivery (organizational culture), supervisor and co-worker support on customer orientation. Nurses' personal resources interact with these, particularly supervisor and co-worker support, to develop staff job satisfaction and empathy. The need for support mechanisms in stressful times is discussed. We propose that training in compassion and empathy would help leaders to model desirable attributes that contribute towards customer orientation. © 2015 John Wiley & Sons Ltd.

  18. Hip2Norm: an object-oriented cross-platform program for 3D analysis of hip joint morphology using 2D pelvic radiographs.

    PubMed

    Zheng, G; Tannast, M; Anderegg, C; Siebenrock, K A; Langlotz, F

    2007-07-01

    We developed an object-oriented cross-platform program to perform three-dimensional (3D) analysis of hip joint morphology using two-dimensional (2D) anteroposterior (AP) pelvic radiographs. Landmarks extracted from 2D AP pelvic radiographs and optionally an additional lateral pelvic X-ray were combined with a cone beam projection model to reconstruct 3D hip joints. Since individual pelvic orientation can vary considerably, a method for standardizing pelvic orientation was implemented to determine the absolute tilt/rotation. The evaluation of anatomically morphologic differences was achieved by reconstructing the projected acetabular rim and the measured hip parameters as if obtained in a standardized neutral orientation. The program had been successfully used to interactively objectify acetabular version in hips with femoro-acetabular impingement or developmental dysplasia. Hip(2)Norm is written in object-oriented programming language C++ using cross-platform software Qt (TrollTech, Oslo, Norway) for graphical user interface (GUI) and is transportable to any platform.

  19. An acoustic doppler current profiler survey of flow velocities in St. Clair River, a connecting channel of the Great Lakes

    USGS Publications Warehouse

    Holtschlag, David J.; Koschik, John A.

    2003-01-01

    Acoustic Doppler current profilers (ADCP) were used to measure flow velocities in St. Clair River during a survey in May and June of 2002, as part of a study to assess the susceptibility of public water intakes to contaminants on the St. Clair-Detroit River Waterway. The survey provides 2.7 million point velocity measurements at 104 cross sections. Sections are spaced about 1,630 ft apart along the river from Port Huron to Algonac, Michigan, a distance of 28.6 miles. Two transects were obtained at each cross section, one in each direction across the river. Along each transect, velocity profiles were obtained 2-4 ft apart. At each velocity profile, average water velocity data were obtained at 1.64 ft intervals of depth. The raw position and velocity data from the ADCP field survey were adjusted for local magnetic anomalies using global positioning system (GPS) measurements at the end points of the transects. The adjusted velocity and ancillary data can be retrieved through the internet and extracted to column-oriented data files.

  20. Planar spatial correlations, anisotropy, and specific surface area of stationary random porous media

    NASA Astrophysics Data System (ADS)

    Berryman, James G.

    1998-02-01

    An earlier result of the author showed that an anisotropic spatial correlation function of a random porous medium could be used to compute the specific surface area when it is stationary as well as anisotropic by first performing a three-dimensional radial average and then taking the first derivative with respect to lag at the origin. This result generalized the earlier result for isotropic porous media of Debye et al. [J. Appl. Phys. 28, 679 (1957)]. The present article provides more detailed information about the use of spatial correlation functions for anisotropic porous media and in particular shows that, for stationary anisotropic media, the specific surface area can be related to the derivative of the two-dimensional radial average of the correlation function measured from cross sections taken through the anisotropic medium. The main concept is first illustrated using a simple pedagogical example for an anisotropic distribution of spherical voids. Then, a general derivation of formulas relating the derivative of the planar correlation functions to surface integrals is presented. When the surface normal is uniformly distributed (as is the case for any distribution of spherical voids), our formulas can be used to relate a specific surface area to easily measurable quantities from any single cross section. When the surface normal is not distributed uniformly (as would be the case for an oriented distribution of ellipsoidal voids), our results show how to obtain valid estimates of specific surface area by averaging measurements on three orthogonal cross sections. One important general observation for porous media is that the surface area from nearly flat cracks may be underestimated from measurements on orthogonal cross sections if any of the cross sections happen to lie in the plane of the cracks. This result is illustrated by taking the very small aspect ratio (penny-shaped crack) limit of an oblate spheroid, but holds for other types of flat surfaces as well.

  1. An integrative modeling approach for the efficient estimation of cross sectional tibial stresses during locomotion.

    PubMed

    Derrick, Timothy R; Edwards, W Brent; Fellin, Rebecca E; Seay, Joseph F

    2016-02-08

    The purpose of this research was to utilize a series of models to estimate the stress in a cross section of the tibia, located 62% from the proximal end, during walking. Twenty-eight male, active duty soldiers walked on an instrumented treadmill while external force data and kinematics were recorded. A rigid body model was used to estimate joint moments and reaction forces. A musculoskeletal model was used to gather muscle length, muscle velocity, moment arm and orientation information. Optimization procedures were used to estimate muscle forces and finally internal bone forces and moments were applied to an inhomogeneous, subject specific bone model obtained from CT scans to estimate stress in the bone cross section. Validity was assessed by comparison to stresses calculated from strain gage data in the literature and sensitivity was investigated using two simplified versions of the bone model-a homogeneous model and an ellipse approximation. Peak compressive stress occurred on the posterior aspect of the cross section (-47.5 ± 14.9 MPa). Peak tensile stress occurred on the anterior aspect (27.0 ± 11.7 MPa) while the location of peak shear was variable between subjects (7.2 ± 2.4 MPa). Peak compressive, tensile and shear stresses were within 0.52 MPa, 0.36 MPa and 3.02 MPa respectively of those calculated from the converted strain gage data. Peak values from a inhomogeneous model of the bone correlated well with homogeneous model (normal: 0.99; shear: 0.94) as did the normal ellipse model (r=0.89-0.96). However, the relationship between shear stress in the inhomogeneous model and ellipse model was less accurate (r=0.64). The procedures detailed in this paper provide a non-invasive and relatively quick method of estimating cross sectional stress that holds promise for assessing injury and osteogenic stimulus in bone during normal physical activity. Copyright © 2016 Elsevier Ltd. All rights reserved.

  2. A new laser reflectance system capable of measuring changing cross-sectional area of soft tissues during tensile testing.

    PubMed

    Pokhai, Gabriel G; Oliver, Michele L; Gordon, Karen D

    2009-09-01

    Determination of the biomechanical properties of soft tissues such as tendons and ligaments is dependent on the accurate measurement of their cross-sectional area (CSA). Measurement methods, which involve contact with the specimen, are problematic because soft tissues are easily deformed. Noncontact measurement methods are preferable in this regard, but may experience difficulty in dealing with the complex cross-sectional shapes and glistening surfaces seen in soft tissues. Additionally, existing CSA measurement systems are separated from the materials testing machine, resulting in the inability to measure CSA during testing. Furthermore, CSA measurements are usually made in a different orientation, and with a different preload, prior to testing. To overcome these problems, a noncontact laser reflectance system (LRS) was developed. Designed to fit in an Instron 8872 servohydraulic test machine, the system measures CSA by orbiting a laser transducer in a circular path around a soft tissue specimen held by tissue clamps. CSA measurements can be conducted before and during tensile testing. The system was validated using machined metallic specimens of various shapes and sizes, as well as different sizes of bovine tendons. The metallic specimens could be measured to within 4% accuracy, and the tendons to within an average error of 4.3%. Statistical analyses showed no significant differences between the measurements of the LRS and those of the casting method, an established measurement technique. The LRS was successfully used to measure the changing CSA of bovine tendons during uniaxial tensile testing. The LRS developed in this work represents a simple, quick, and accurate way of reconstructing complex cross-sectional profiles and calculating cross-sectional areas. In addition, the LRS represents the first system capable of automatically measuring changing CSA of soft tissues during tensile testing, facilitating the calculation of more accurate biomechanical properties.

  3. Planar spatial correlations, anisotropy, and specific surface area of stationary random porous media

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Berryman, J.G.

    1998-02-01

    An earlier result of the author showed that an anisotropic spatial correlation function of a random porous medium could be used to compute the specific surface area when it is stationary as well as anisotropic by first performing a three-dimensional radial average and then taking the first derivative with respect to lag at the origin. This result generalized the earlier result for isotropic porous media of Debye {ital et al.} [J. Appl. Phys. {bold 28}, 679 (1957)]. The present article provides more detailed information about the use of spatial correlation functions for anisotropic porous media and in particular shows that,more » for stationary anisotropic media, the specific surface area can be related to the derivative of the two-dimensional radial average of the correlation function measured from cross sections taken through the anisotropic medium. The main concept is first illustrated using a simple pedagogical example for an anisotropic distribution of spherical voids. Then, a general derivation of formulas relating the derivative of the planar correlation functions to surface integrals is presented. When the surface normal is uniformly distributed (as is the case for any distribution of spherical voids), our formulas can be used to relate a specific surface area to easily measurable quantities from any single cross section. When the surface normal is not distributed uniformly (as would be the case for an oriented distribution of ellipsoidal voids), our results show how to obtain valid estimates of specific surface area by averaging measurements on three orthogonal cross sections. One important general observation for porous media is that the surface area from nearly flat cracks may be underestimated from measurements on orthogonal cross sections if any of the cross sections happen to lie in the plane of the cracks. This result is illustrated by taking the very small aspect ratio (penny-shaped crack) limit of an oblate spheroid, but holds for other types of flat surfaces as well.« less

  4. Internal structure of multiphase zinc-blende wurtzite gallium nitride nanowires.

    PubMed

    Jacobs, B W; Ayres, V M; Crimp, M A; McElroy, K

    2008-10-08

    In this paper, the internal structure of novel multiphase gallium nitride nanowires in which multiple zinc-blende and wurtzite crystalline domains grow simultaneously along the entire length of the nanowire is investigated. Orientation relationships within the multiphase nanowires are identified using high-resolution transmission electron microscopy of nanowire cross-sections fabricated with a focused ion beam system. A coherent interface between the zinc-blende and wurtzite phases is identified. A mechanism for catalyst-free vapor-solid multiphase nanowire nucleation and growth is proposed.

  5. Novel Concepts for Conformal Load-Bearing Antenna Structure

    DTIC Science & Technology

    2008-02-01

    through the entire cross-section of a conductor as visualised in the classical “water- through-a-garden- hose ” explanation of DC current flow. Rather, RF...these fabrics were 6k T650 carbon fibre tows braided into unidirectional fabrics. The 6k tows in these fabrics were oriented in the 0° direction and...90]s lay-up 0.050 DSF0302 Standard aerospace prepreg tape [±45]s lay-up 0.061 DSF0601 Braided standard carbon fibres/Standard resin 6k T650

  6. Modeling off-resonant nonlinear-optical cascading in mesoscopic thin films and guest-host molecular systems

    NASA Astrophysics Data System (ADS)

    Dawson, Nathan J.; Andrews, James H.; Crescimanno, Michael

    2013-12-01

    A model for off-resonant microscopic cascading of (hyper)polarizabilities is developed using a self-consistent field approach to study mesoscopic systems of nonlinear polarizable atoms and molecules. We find enhancements in the higher-order susceptibilities resulting from geometrical and boundary orientation effects. We include an example of the dependence on excitation beam cross sectional structure and a simplified derivation of the microscopic cascading of the nonlinear-optical response in guest-host systems.

  7. Study of heavy-ion induced fission for heavy-element synthesis

    NASA Astrophysics Data System (ADS)

    Nishio, K.; Ikezoe, H.; Hofmann, S.; Heßberger, F. P.; Ackermann, D.; Antalic, S.; Aritomo, Y.; Comas, V. F.; Düllman, Ch. E.; Gorshkov, A.; Graeger, R.; Heinz, S.; Heredia, J. A.; Hirose, K.; Khuyagbaatar, J.; Kindler, B.; Kojouharov, I.; Lommel, B.; Makii, H.; Mann, R.; Mitsuoka, S.; Nagame, Y.; Nishinaka, I.; Ohtsuki, T.; Popeko, A. G.; Saro, S.; Schädel, M.; Türler, A.; Wakabayashi, Y.; Watanabe, Y.; Yakushev, A.; Yeremin, A. V.

    2014-03-01

    Fission fragment mass distributions were measured in heavy-ion induced fissions using 238U target nucleus. The measured mass distributions changed drastically with incident energy. The results are explained by a change of the ratio between fusion and qasifission with nuclear orientation. A calculation based on a fluctuation dissipation model reproduced the mass distributions and their incident energy dependence. Fusion probability was determined in the analysis, and the values were consistent with those determined from the evaporation residue cross sections.

  8. Nominal SARAL Transfer Function

    NASA Technical Reports Server (NTRS)

    Arnold, David A.; Lemoine, Frank (Editor)

    2015-01-01

    This paper gives a calculation of the range correction and cross section of the SARAL (Satellite with Argos and ALtiKa) Indian/French ocean radar satellite retroreflector array assuming the cube corners are coated and have a dihedral angle offset of about 1.5 arcseconds to account for velocity aberration. The cubes are assumed to all have the same orientation within the mounting. The derived range correction may be applied in precise orbit determination analyses that use Satellite Laser Ranging (SLR) data to SARAL.

  9. Utilized Resources of Hope, Orientation, and Inspiration in Life of Persons with Multiple Sclerosis and Their Association with Life Satisfaction, Adaptive Coping Strategies, and Spirituality.

    PubMed

    Wirth, Anne-Gritli; Büssing, Arndt

    2016-08-01

    In a cross-sectional survey among 213 patients with multiple sclerosis, we intended to analyze their resources of hope, orientation, and inspiration in life, and how these resources are related to health-associated variables, adaptive coping strategies, and life satisfaction. Resources were categorized as Faith (10 %), Family (22 %), Other sources (16 %), and No answer (53 %). These non-respondents were predominantly neither religious nor spiritual (70 % R-S-). Although R-S- persons are a heterogeneous group with varying existential interest, they did not significantly differ from their spiritual/religious counterparts with respect to physical and mental health or life satisfaction, but for an adaptive Reappraisal strategy and Gratitude/Awe.

  10. Molecular Packing of Amiphiphiles with Crown Polar Heads at the Air-Water Interface

    NASA Astrophysics Data System (ADS)

    Larson, K.; Vaknin, D.; Villavicencio, O.; McGrath, D.; Tsukruk, V. V.

    2002-03-01

    An amphiphilic compound containing a benzyl-15-crown-5 focal point, azobenzene spacer, and a dodecyl tail as a peripheral group has been investigated at the air-water interface. X-ray grazing incident diffraction and reflectivity were preformed on the Langmuir monolayers to elucidate molecular packing and orientation. At high surface pressure, we observed intralayer packing of the alkyl tails with doubling parameters of the conventional orthorhombic unit cell (supercell) and long-range positional ordering. High tilt of the alkyl tails of about 58º from the surface normal was a signature of molecular packing caused by a large mismatch between the cross-sectional areas of the polar heads and the alkyl tail. Higher generation molecules of the same series display straight tail orientation and hexagonal lateral packing.

  11. Effect of the sample annealing temperature and sample crystallographic orientation on the charge kinetics of MgO single crystals subjected to keV electron irradiation.

    PubMed

    Boughariou, A; Damamme, G; Kallel, A

    2015-04-01

    This paper focuses on the effect of sample annealing temperature and crystallographic orientation on the secondary electron yield of MgO during charging by a defocused electron beam irradiation. The experimental results show that there are two regimes during the charging process that are better identified by plotting the logarithm of the secondary electron emission yield, lnσ, as function of the total trapped charge in the material QT. The impact of the annealing temperature and crystallographic orientation on the evolution of lnσ is presented here. The slope of the asymptotic regime of the curve lnσ as function of QT, expressed in cm(2) per trapped charge, is probably linked to the elementary cross section of electron-hole recombination, σhole, which controls the trapping evolution in the reach of the stationary flow regime. © 2014 The Authors Journal of Microscopy © 2014 Royal Microscopical Society.

  12. Sexual orientation and sexual risk behaviors among male students of a university in southern Thailand.

    PubMed

    Sureerut, Rongruang; Assanangkornchai, Sawitri; Chongsuvivatwong, Virasakdi; Duangmala, Padoongyot

    2013-09-01

    To determine the prevalence of sexual orientation, identify predictors of being homosexual or bisexual (HB), and assess the association of sexual orientation with sexual risk behaviors among university male students in southern Thailand. A cross-sectional study was conducted on third year male university students between June 2008 and February 2009 using anonymous self-administered questionnaires. Among 1,101 eligible students, 1,013 (92%) responded The prevalence of heterosexuality, homosexuality, and bisexuality among respondents were 90.2%, 6.7%, and 3.1%, respectively giving a prevalence of HB of 9.8%. Significant factors predicting HB included having separated parents. Overall lifetime prevalence of men having sex with men (MSM) was 6.3% (2% in heterosexual males and 46.5% among HB males). HB males were more likely to have multiple sex partners and engage in group sex, and less likely to use condoms than were heterosexual males. The prevalence of sexual risk behaviors among these male students, especially HB, was high.

  13. Predicting strain using forward modelling of restored cross-sections: Application to rollover anticlines over listric normal faults

    NASA Astrophysics Data System (ADS)

    Poblet, Josep; Bulnes, Mayte

    2007-12-01

    A strategy to predict strain across geological structures, based on previous techniques, is modified and evaluated, and a practical application is shown. The technique, which employs cross-section restoration combined with kinematic forward modelling, consists of restoring a section, placing circular strain markers on different domains of the restoration, and forward modelling the restored section with strain markers until the present-day stage is reached. The restoration algorithm employed must be also used to forward model the structure. The ellipses in the forward modelled section allow determining the strain state of the structure and may indirectly predict orientation and distribution of minor structures such as small-scale fractures. The forward model may be frozen at different time steps (different growth stages) allowing prediction of both spatial and temporal variation of strain. The method is evaluated through its application to two stages of a clay experiment, that includes strain markers, and its geometry and deformation history are well documented, providing a strong control on the results. To demonstrate the method's potential, it is successfully applied to a depth-converted seismic profile in the Central Sumatra Basin, Indonesia. This allowed us to gain insight into the deformation undergone by rollover anticlines over listric normal faults.

  14. Orientation-dependent structural and photocatalytic properties of LaCoO3 epitaxial nano-thin films

    NASA Astrophysics Data System (ADS)

    Zhang, Yan-ping; Liu, Hai-feng; Hu, Hai-long; Xie, Rui-shi; Ma, Guo-hua; Huo, Ji-chuan; Wang, Hai-bin

    2018-02-01

    LaCoO3 epitaxial films were grown on (100), (110) and (111) oriented LaAlO3 substrates by the polymer-assisted deposition method. Crystal structure measurement and cross-section observation indicate that all the LaCoO3 films are epitaxially grown in accordance with the orientation of LaAlO3 substrates, with biaxial compressive strain in the ab plane. Owing to the different strain directions of CoO6 octahedron, the mean Co-O bond length increases by different amounts in (100), (110) and (111) oriented films compared with that of bulk LaCoO3, and the (100) oriented LaCoO3 has the largest increase. Photocatalytic degradation of methyl orange indicates that the order of photocatalytic activity of the three oriented films is (100) > (111) > (110). Combined with analysis of electronic nature and band structure for LaCoO3 films, it is found that the change of the photocatalytic activity is closely related to the crystal field splitting energy of Co3+ and Co-O binding energy. The increase in the mean Co-O bond length will decrease the crystal field splitting energy of Co3+ and Co-O binding energy and further reduce the value of band gap energy, thus improving the photocatalytic activity. This may also provide a clue for expanding the visible-light-induced photocatalytic application of LaCoO3.

  15. Crystallographic orientation mapping with an electron backscattered diffraction technique in (Bi, Pb)2Sr2Ca2Cu3O10 superconductor tapes

    NASA Astrophysics Data System (ADS)

    Tan, T. T.; Li, S.; Oh, J. T.; Gao, W.; Liu, H. K.; Dou, S. X.

    2001-02-01

    It is believed that grain boundaries act as weak links in limiting the critical current density (Jc) of bulk high-Tc superconductors. The weak-link problem can be greatly reduced by elimination or minimization of large-angle grain boundaries. It has been reported that the distribution of the Jc in (Bi, Pb)2Sr2Ca2Cu3O10+x (Bi2223) superconductor tapes presents a parabolic relationship in the transverse cross section of the tapes, with the lowest currents occurring at the centre of the tapes. It was proposed that the Jc distribution is strongly dependent on the local crystallographic orientation distribution of the Bi2223 oxides. However, the local three-dimensional crystallographic orientation distribution of Bi2223 crystals in (Bi, Pb)2Sr2Ca2Cu3O10+x superconductor tapes has not yet been experimentally determined. In this work, the electron backscattered diffraction technique was employed to map the crystallographic orientation distribution, determine the misorientation of grain boundaries and also map the misorientation distribution in Bi2223 superconductor tapes. Through crystallographic orientation mapping, the relationship between the crystallographic orientation distribution, the boundary misorientation distribution and the fabrication parameters may be understood. This can be used to optimize the fabrication processes thus increasing the critical current density in Bi2223 superconductor tapes.

  16. Sexual orientation and quality of life among students of Obafemi Awolowo University (OAU), Nigeria.

    PubMed

    Boladale, Mapayi; Olakunle, Oginni; Olutayo, Aloba; Adesanmi, Akinsulore

    2015-12-01

    Sexual orientation is an individual's pattern of physical and emotional arousal toward members of the same and/or opposite gender. To determine the pattern of sexual orientation and the relationship between sexual orientation and quality of life among a sample of OAU students. A descriptive cross sectional study among 481 students of OAU using a multistage sampling technique. They completed a Socio-demographic data schedule, questions on sexual orientation and the World Health Organization Quality of Life Scale - Brief version (WHO QOL-BREF). 4.9% of the sample self-identified as bisexual while 0.1% self-identified as gay/lesbian. 11.8% of the respondents reported varying degrees of attraction to the opposite gender. The mean age of sexual debut was 17.62 (±4.05). Those who self-identified as gay/lesbian/bisexual had a lower average score on all domains of the WHO QOL-BREF. Same sex sexual attraction and practice occur among young people in Nigeria and this has sexual and reproductive health implications. GLB youth report a lower QOL compared to heterosexual counterparts and this may suggest some distress among this vulnerable group. More studies should be undertaken to explore issues raised in planning interventions and health services that would improve safe sexual practices within this group.

  17. Keeping Up with the Joneses: Friends' Perfectionism and Students' Orientation Toward Extrinsic Aspirations.

    PubMed

    Hope, Nora; Koestner, Richard; Holding, Anne; Harvey, Brenda

    2016-12-01

    Kasser and Ryan (1993,1996) have contrasted two types of life values: intrinsic aspirations, which include community contribution, building close relationships, and self-growth, and extrinsic aspirations, which include fame, wealth, and physical beauty. Prioritization of extrinsic relative to intrinsic aspirations has been related cross-sectionally to decreased well-being (Kasser, 2002). However, the influence of close others in the etiology of young adults' prioritization of extrinsic aspirations, and the prospective effects of aspirations on well-being, are not well understood. In a multiple-informant prospective study of 341 university students (mean age = 19.4; 64% Caucasian; 74% female), we examined the influence of friends' and family members' perfectionism on participants' aspirations, and the outcomes of prioritization of extrinsic aspirations. Having friends high in other-oriented perfectionism was significantly positively related to prioritization of extrinsic over intrinsic aspirations. Furthermore, living with friends amplified the effect. Last, prioritization of extrinsic aspirations at T1 was related to decreased subjective well-being and self-concordance for goals 3 months later. The study provides preliminary evidence for a relationship between friends' other-oriented perfectionism and students' orientation toward extrinsic aspirations, as well as negative prospective consequences of students' orientation to extrinsic aspirations. © 2015 Wiley Periodicals, Inc.

  18. Orientation masking and cross-orientation suppression (XOS): implications for estimates of filter bandwidth.

    PubMed

    Meese, Tim S; Holmes, David J

    2010-10-01

    Most contemporary models of spatial vision include a cross-oriented route to suppression (masking from a broadly tuned inhibitory pool), which is most potent at low spatial and high temporal frequencies (T. S. Meese & D. J. Holmes, 2007). The influence of this pathway can elevate orientation-masking functions without exciting the target mechanism, and because early psychophysical estimates of filter bandwidth did not accommodate this, it is likely that they have been overestimated for this corner of stimulus space. Here we show that a transient 40% contrast mask causes substantial binocular threshold elevation for a transient vertical target, and this declines from a mask orientation of 0° to about 40° (indicating tuning), and then more gently to 90°, where it remains at a factor of ∼4. We also confirm that cross-orientation masking is diminished or abolished at high spatial frequencies and for sustained temporal modulation. We fitted a simple model of pedestal masking and cross-orientation suppression (XOS) to our data and those of G. C. Phillips and H. R. Wilson (1984) and found the dependency of orientation bandwidth on spatial frequency to be much less than previously supposed. An extension of our linear spatial pooling model of contrast gain control and dilution masking (T. S. Meese & R. J. Summers, 2007) is also shown to be consistent with our results using filter bandwidths of ±20°. Both models include tightly and broadly tuned components of divisive suppression. More generally, because XOS and/or dilution masking can affect the shape of orientation-masking curves, we caution that variations in bandwidth estimates might reflect variations in processes that have nothing to do with filter bandwidth.

  19. A computer program for fitting smooth surfaces to an aircraft configuration and other three dimensional geometries

    NASA Technical Reports Server (NTRS)

    Craidon, C. B.

    1975-01-01

    A computer program that uses a three-dimensional geometric technique for fitting a smooth surface to the component parts of an aircraft configuration is presented. The resulting surface equations are useful in performing various kinds of calculations in which a three-dimensional mathematical description is necessary. Programs options may be used to compute information for three-view and orthographic projections of the configuration as well as cross-section plots at any orientation through the configuration. The aircraft geometry input section of the program may be easily replaced with a surface point description in a different form so that the program could be of use for any three-dimensional surface equations.

  20. Characterizing Brain Structures and Remodeling after TBI Based on Information Content, Diffusion Entropy

    PubMed Central

    Fozouni, Niloufar; Chopp, Michael; Nejad-Davarani, Siamak P.; Zhang, Zheng Gang; Lehman, Norman L.; Gu, Steven; Ueno, Yuji; Lu, Mei; Ding, Guangliang; Li, Lian; Hu, Jiani; Bagher-Ebadian, Hassan; Hearshen, David; Jiang, Quan

    2013-01-01

    Background To overcome the limitations of conventional diffusion tensor magnetic resonance imaging resulting from the assumption of a Gaussian diffusion model for characterizing voxels containing multiple axonal orientations, Shannon's entropy was employed to evaluate white matter structure in human brain and in brain remodeling after traumatic brain injury (TBI) in a rat. Methods Thirteen healthy subjects were investigated using a Q-ball based DTI data sampling scheme. FA and entropy values were measured in white matter bundles, white matter fiber crossing areas, different gray matter (GM) regions and cerebrospinal fluid (CSF). Axonal densities' from the same regions of interest (ROIs) were evaluated in Bielschowsky and Luxol fast blue stained autopsy (n = 30) brain sections by light microscopy. As a case demonstration, a Wistar rat subjected to TBI and treated with bone marrow stromal cells (MSC) 1 week after TBI was employed to illustrate the superior ability of entropy over FA in detecting reorganized crossing axonal bundles as confirmed by histological analysis with Bielschowsky and Luxol fast blue staining. Results Unlike FA, entropy was less affected by axonal orientation and more affected by axonal density. A significant agreement (r = 0.91) was detected between entropy values from in vivo human brain and histologically measured axonal density from post mortum from the same brain structures. The MSC treated TBI rat demonstrated that the entropy approach is superior to FA in detecting axonal remodeling after injury. Compared with FA, entropy detected new axonal remodeling regions with crossing axons, confirmed with immunohistological staining. Conclusions Entropy measurement is more effective in distinguishing axonal remodeling after injury, when compared with FA. Entropy is also more sensitive to axonal density than axonal orientation, and thus may provide a more accurate reflection of axonal changes that occur in neurological injury and disease. PMID:24143186

  1. Characterizing brain structures and remodeling after TBI based on information content, diffusion entropy.

    PubMed

    Fozouni, Niloufar; Chopp, Michael; Nejad-Davarani, Siamak P; Zhang, Zheng Gang; Lehman, Norman L; Gu, Steven; Ueno, Yuji; Lu, Mei; Ding, Guangliang; Li, Lian; Hu, Jiani; Bagher-Ebadian, Hassan; Hearshen, David; Jiang, Quan

    2013-01-01

    To overcome the limitations of conventional diffusion tensor magnetic resonance imaging resulting from the assumption of a Gaussian diffusion model for characterizing voxels containing multiple axonal orientations, Shannon's entropy was employed to evaluate white matter structure in human brain and in brain remodeling after traumatic brain injury (TBI) in a rat. Thirteen healthy subjects were investigated using a Q-ball based DTI data sampling scheme. FA and entropy values were measured in white matter bundles, white matter fiber crossing areas, different gray matter (GM) regions and cerebrospinal fluid (CSF). Axonal densities' from the same regions of interest (ROIs) were evaluated in Bielschowsky and Luxol fast blue stained autopsy (n = 30) brain sections by light microscopy. As a case demonstration, a Wistar rat subjected to TBI and treated with bone marrow stromal cells (MSC) 1 week after TBI was employed to illustrate the superior ability of entropy over FA in detecting reorganized crossing axonal bundles as confirmed by histological analysis with Bielschowsky and Luxol fast blue staining. Unlike FA, entropy was less affected by axonal orientation and more affected by axonal density. A significant agreement (r = 0.91) was detected between entropy values from in vivo human brain and histologically measured axonal density from post mortum from the same brain structures. The MSC treated TBI rat demonstrated that the entropy approach is superior to FA in detecting axonal remodeling after injury. Compared with FA, entropy detected new axonal remodeling regions with crossing axons, confirmed with immunohistological staining. Entropy measurement is more effective in distinguishing axonal remodeling after injury, when compared with FA. Entropy is also more sensitive to axonal density than axonal orientation, and thus may provide a more accurate reflection of axonal changes that occur in neurological injury and disease.

  2. Development of attention networks and their interactions in childhood.

    PubMed

    Pozuelos, Joan P; Paz-Alonso, Pedro M; Castillo, Alejandro; Fuentes, Luis J; Rueda, M Rosario

    2014-10-01

    In the present study, we investigated developmental trajectories of alerting, orienting, and executive attention networks and their interactions over childhood. Two cross-sectional experiments were conducted with different samples of 6- to 12-year-old children using modified versions of the attention network task (ANT). In Experiment 1 (N = 106), alerting and orienting cues were independently manipulated, thus allowing examination of interactions between these 2 networks, as well as between them and the executive attention network. In Experiment 2 (N = 159), additional changes were made to the task in order to foster exogenous orienting cues. Results from both studies consistently revealed separate developmental trajectories for each attention network. Children younger than 7 years exhibited stronger benefits from having an alerting auditory signal prior to the target presentation. Developmental changes in orienting were mostly observed on response accuracy between middle and late childhood, whereas executive attention showed increases in efficiency between 7 years and older ages, and further improvements in late childhood. Of importance, across both experiments, significant interactions between alerting and orienting, as well as between each of these and the executive attention network, were observed. Alerting cues led to speeding shifts of attention and enhancing orienting processes. Also, both alerting and orienting cues modulated the magnitude of the flanker interference effect. These findings inform current theoretical models of human attention and its development, characterizing for the first time, the age-related course of attention networks interactions that, present in adults, stem from further refinements over childhood.

  3. Nurses’ Perceptions of Spirituality and Spiritual Care at Five Tertiary Care Hospitals in Riyadh, Saudi Arabia: A Cross-Sectional Study

    PubMed Central

    Kaddourah, Bayan; Abu-Shaheen, Amani; Al-Tannir, Mohamad

    2018-01-01

    Objectives To identify the perceptions towards spirituality and spiritual care among nurses at tertiary care hospitals in Riyadh, Saudi Arabia. Methods A cross-sectional study was conducted on nurses at five tertiary care hospitals in Riyadh. The data were collected using the Spirituality and Spiritual Care Rating Scale (SSCRS). Results We recruited 978 nurses, of which 896 (91.6%) were female. The mean SSCRS score was 3.8±0.5 (the spirituality and spiritual care statements fell within the ‘agree’ category). A statistically significant difference was found only between perceptions of spirituality and spiritual care among nurses and their nursing experience duration. Conclusions The findings of this study revealed that nurses were oriented to spirituality, and respected the importance of providing spiritual care to their patients. The nurses believed that spirituality exists in all religions and spiritual care means showing concern while treating the patients by focusing on respecting patients’ religious beliefs. PMID:29657685

  4. Quantitative hard x-ray phase contrast imaging of micropipes in SiC

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Kohn, V. G.; Argunova, T. S.; Je, J. H., E-mail: jhje@postech.ac.kr

    2013-12-15

    Peculiarities of quantitative hard x-ray phase contrast imaging of micropipes in SiC are discussed. The micropipe is assumed as a hollow cylinder with an elliptical cross section. The major and minor diameters can be restored using the least square fitting procedure by comparing the experimental data, i.e. the profile across the micropipe axis, with those calculated based on phase contrast theory. It is shown that one projection image gives an information which does not allow a complete determination of the elliptical cross section, if an orientation of micropipe is not known. Another problem is a weak accuracy in estimating themore » diameters, partly because of using pink synchrotron radiation, which is necessary because a monochromatic beam intensity is not sufficient to reveal the weak contrast from a very small object. The general problems of accuracy in estimating the two diameters using the least square procedure are discussed. Two experimental examples are considered to demonstrate small as well as modest accuracies in estimating the diameters.« less

  5. Single-color laser ranging with a cube-corner-retroreflector array

    NASA Technical Reports Server (NTRS)

    Song, G. Hugh

    1987-01-01

    Lidar cross section of some typical types of cube-corner retroreflectors (CCRs) having a three corner mirror system is investigated for the case that the CCR is tilted from the normal illumination axis. Analytic expressions for the effective aperture area for the two typical window types (circular and hexagonal) of CCRs are obtained for the case that the CCR is tilted. The range of incidence angle in which only the total reflection occurs at all three uncoated corner mirrors has been found to vary considerably with the orientation of CCR and the refractive index of the CCR prism. The analytical expression for the far-field diffraction pattern of a tilted CCR is obtained by taking different polarization transformation of the six sectors of the effective reflecting aperture into account. This expression is essential when evaluating the lidar cross section of a moving CCR which is tilted in general. Formulas for the angles defining the six sectors have also been obtained.

  6. Sociosexuality in mainland China.

    PubMed

    Zheng, Wei Jun; Zhou, Xu Dong; Wang, Xiao Lei; Hesketh, Therese

    2014-04-01

    The construct of sociosexuality or sociosexual orientation describes the extent to which people will have casual, uncommitted sexual relationships. The Sociosexual Orientation Inventory (SOI) has been used to measure sociosexuality in many countries, but not in China. The aims of this study were to explore sociosexuality in a cross-section of the Chinese adult population, to quantify sex differences in sociosexuality, and to examine the sociodemographic correlates and the impact of the high sex ratio. The study consisted of a cross-sectional survey using a self-completion questionnaire. It was administered to adults of reproductive age in three provinces: Zhejiang, Guizhou, and Yunnan. While questionnaires were received from 7,424 participants, total SOI scores could be computed only for the 4,645 (63 %) who completed all seven items of the SOI. The mean score for men and women combined was 21.0, very low compared with most other countries, indicating restricted sociosexuality. The men (n = 2,048) had a mean of 27, showing more restricted sociosexuality than in all other countries where the SOI has been used. Wealth was the strongest independent correlate of high (unrestricted) sociosexuality in men and women. The effect size for the difference between the sexes was moderate (Cohen's d = .64), and comparable to more developed countries, perhaps reflecting relative gender equality in contemporary China. Despite the very high sex ratio, which is theorized to lead to restricted sexuality, its influence was difficult to determine, since differences in sociosexuality between high and low sex ratio areas within this population were inconsistent.

  7. Accurate single-scattering simulation of ice cloud using the invariant-imbedding T-matrix method and the physical-geometric optics method

    NASA Astrophysics Data System (ADS)

    Sun, B.; Yang, P.; Kattawar, G. W.; Zhang, X.

    2017-12-01

    The ice cloud single-scattering properties can be accurately simulated using the invariant-imbedding T-matrix method (IITM) and the physical-geometric optics method (PGOM). The IITM has been parallelized using the Message Passing Interface (MPI) method to remove the memory limitation so that the IITM can be used to obtain the single-scattering properties of ice clouds for sizes in the geometric optics regime. Furthermore, the results associated with random orientations can be analytically achieved once the T-matrix is given. The PGOM is also parallelized in conjunction with random orientations. The single-scattering properties of a hexagonal prism with height 400 (in units of lambda/2*pi, where lambda is the incident wavelength) and an aspect ratio of 1 (defined as the height over two times of bottom side length) are given by using the parallelized IITM and compared to the counterparts using the parallelized PGOM. The two results are in close agreement. Furthermore, the integrated single-scattering properties, including the asymmetry factor, the extinction cross-section, and the scattering cross-section, are given in a completed size range. The present results show a smooth transition from the exact IITM solution to the approximate PGOM result. Because the calculation of the IITM method has reached the geometric regime, the IITM and the PGOM can be efficiently employed to accurately compute the single-scattering properties of ice cloud in a wide spectral range.

  8. A deep etching mechanism for trench-bridging silicon nanowires

    NASA Astrophysics Data System (ADS)

    Tasdemir, Zuhal; Wollschläger, Nicole; Österle, Werner; Leblebici, Yusuf; Erdem Alaca, B.

    2016-03-01

    Introducing a single silicon nanowire with a known orientation and dimensions to a specific layout location constitutes a major challenge. The challenge becomes even more formidable, if one chooses to realize the task in a monolithic fashion with an extreme topography, a characteristic of microsystems. The need for such a monolithic integration is fueled by the recent surge in the use of silicon nanowires as functional building blocks in various electromechanical and optoelectronic applications. This challenge is addressed in this work by introducing a top-down, silicon-on-insulator technology. The technology provides a pathway for obtaining well-controlled silicon nanowires along with the surrounding microscale features up to a three-order-of-magnitude scale difference. A two-step etching process is developed, where the first shallow etch defines a nanoscale protrusion on the wafer surface. After applying a conformal protection on the protrusion, a deep etch step is carried out forming the surrounding microscale features. A minimum nanowire cross-section of 35 nm by 168 nm is demonstrated in the presence of an etch depth of 10 μm. Nanowire cross-sectional features are characterized via transmission electron microscopy and linked to specific process steps. The technology allows control on all dimensional aspects along with the exact location and orientation of the silicon nanowire. The adoption of the technology in the fabrication of micro and nanosystems can potentially lead to a significant reduction in process complexity by facilitating direct access to the nanowire during surface processes such as contact formation and doping.

  9. The mechanism of transforming diamond nanowires to carbon nanostructures.

    PubMed

    Sorkin, Anastassia; Su, Haibin

    2014-01-24

    The transformation of diamond nanowires (DNWs) with different diameters and geometries upon heating is investigated with density-functional-based tight-binding molecular dynamics. DNWs of {100} and {111} oriented cross-section with projected average line density between 7 and 20 atoms Å(-1) transform into carbon nanotubes (CNTs) under gradual heating up to 3500-4000 K. DNWs with projected average line density larger than 25 atoms Å(-1) transform into double-wall CNTs. The route of transformation into CNTs clearly exhibits three stages, with the intriguing intermediate structural motif of a carbon nanoscroll (CNS). Moreover, the morphology plays an important role in the transformation involving the CNS as one important intermediate motif to form CNTs. When starting with [Formula: see text] oriented DNWs with a square cross-section consisting of two {111} facets facing each other, one interesting structure with 'nano-bookshelf' shape emerges: a number of graphene 'shelves' located inside the CNT, bonding to the CNT walls with sp(3) hybridized atoms. The nano-bookshelf structures exist in a wide range of temperatures up to 3,000 K. The further transformation from nano-bookshelf structures depends on the strength of the joints connecting shelves with CNT walls. Notably, the nano-bookshelf structure can evolve into two end products: one is CNT via the CNS pathway, the other is graphene transformed directly from the nano-bookshelf structure at high temperature. This work sheds light on the microscopic insight of carbon nanostructure formation mechanisms with the featured motifs highlighted in the pathways.

  10. A hospital-wide transition from paper to digital problem-oriented clinical notes. A descriptive history and cross-sectional survey of use, usability, and satisfaction.

    PubMed

    Cillessen, Felix H J M; de Vries Robbé, Pieter F; Biermans, Marion C J

    2017-05-17

    To evaluate the use, usability, and physician satisfaction of a locally developed problem-oriented clinical notes application that replaced paper-based records in a large Dutch university medical center. Using a clinical notes database and an application event log file and a cross-sectional survey of usability, authors retrospectively analyzed system usage for medical specialties, users, and patients over 4 years. A standardized questionnaire measured usability. Authors analyzed the effects of sex, age, professional experience, training hours, and medical specialty on user satisfaction via univariate analysis of variance. Authors also examined the correlation between user satisfaction in relation to users' intensity of use of the application. In total 1,793 physicians used the application to record progress notes for 219,755 patients. The overall satisfaction score was 3.2 on a scale from 1 (highly dissatisfied) to 5 (highly satisfied). A statistically significant difference occurred in satisfaction by medical specialty, but no statistically significant differences in satisfaction took place by sex, age, professional experience, or training hours. Intensity of system use did not correlate with physician satisfaction. By two years after the start of the implementation, all medical specialties utilized the clinical notes application. User satisfaction was neutral (3.2 on a 1-5 scale). Authors believe that the significant factors facilitating this transition mirrored success factors reported by other groups: a generic, consistent, and transparent design of the application; intensive collaboration; continuous monitoring; and an incremental rollout.

  11. Measurement of fatigue accumulation in high-strength steels by microstructural examination

    NASA Astrophysics Data System (ADS)

    Nakagawa, Y. G.; Yoshizawa, H.; Lapides, M. E.

    1990-07-01

    Fatigue test bars fabricated from an SA508 class 3 low-carbon steel plate were cyclically deformed at 300 °C (constant low-cycle fatigue, total strain range Δɛ = 0.78 pct and 0.48 pct) to crack initiation (100 pct cumulative damage, CD) and to the factors 75, 50, and 25 pct CD. The test bars were cut perpendicular to the stress axis at the center of the gage length. The X-ray diffraction line-broadening (XRD) was performed on the cross sections created by the cuts. Thin foils (˜0.1-μm thick) were prepared from each cross section and used for the transmission electron microscope (TEM) and selected area diffraction (SAD) study. The half-value line breadth change measured by the XRD increased with the CD increase up to 50 pct, beyond which a significant reduction was observed for the 75 and 100 pct CD sample regardless of the incident X-ray beam angle. By the TEM, the undamaged material (0 pct CD) was characterized by high-angle boundaries, small carbide precipitates, and dislocation cell networks in grains. These characteristics did not show any appreciable changes in all of the samples with fatigue damage of the respective levels. Micro-orientation changes of the dislocation cells studied by the SAD of the foils and a statistical data analysis clearly demonstrated that the mean orientation difference in the cells and its standard deviation increased gradually as the CD increased.

  12. A deep etching mechanism for trench-bridging silicon nanowires.

    PubMed

    Tasdemir, Zuhal; Wollschläger, Nicole; Österle, Werner; Leblebici, Yusuf; Alaca, B Erdem

    2016-03-04

    Introducing a single silicon nanowire with a known orientation and dimensions to a specific layout location constitutes a major challenge. The challenge becomes even more formidable, if one chooses to realize the task in a monolithic fashion with an extreme topography, a characteristic of microsystems. The need for such a monolithic integration is fueled by the recent surge in the use of silicon nanowires as functional building blocks in various electromechanical and optoelectronic applications. This challenge is addressed in this work by introducing a top-down, silicon-on-insulator technology. The technology provides a pathway for obtaining well-controlled silicon nanowires along with the surrounding microscale features up to a three-order-of-magnitude scale difference. A two-step etching process is developed, where the first shallow etch defines a nanoscale protrusion on the wafer surface. After applying a conformal protection on the protrusion, a deep etch step is carried out forming the surrounding microscale features. A minimum nanowire cross-section of 35 nm by 168 nm is demonstrated in the presence of an etch depth of 10 μm. Nanowire cross-sectional features are characterized via transmission electron microscopy and linked to specific process steps. The technology allows control on all dimensional aspects along with the exact location and orientation of the silicon nanowire. The adoption of the technology in the fabrication of micro and nanosystems can potentially lead to a significant reduction in process complexity by facilitating direct access to the nanowire during surface processes such as contact formation and doping.

  13. Specific cross-gender behaviour in boyhood and later homosexual orientation.

    PubMed

    Green, R; Roberts, C W; Williams, K; Goodman, M; Mixon, A

    1987-07-01

    Data from a group of males aged 13 to 23, who as children exhibited extensive cross-gender behaviour, was analysed. In boyhood they frequently played with dress-up dolls, role-played as females, dressed in girls' clothes, stated the wish to be girls, primarily had girls as friends, and avoided rough-and-tumble play. The majority of the group evolved a bisexual or homosexual orientation; two types of behaviour, boyhood doll play and female role-playing, were found to be associated with later homosexual orientation. The findings suggest developmental associations between specific types of boyhood cross-gender behaviour and the objects of later sexual arousal.

  14. Phonon focusing and temperature dependences of thermal conductivity of silicon nanofilms

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Kuleyev, I. I., E-mail: kuleev@imp.uran.ru; Bakharev, S. M.; Kuleyev, I. G.

    2015-04-15

    The effect of phonon focusing on the anisotropy and temperature dependences of the thermal conductivities of silicon nanofilms is analyzed using the three-mode Callaway model. The orientations of the film planes and the directions of the heat flux for maximal or minimal heat removal from silicon chip elements at low temperatures, as well as at room temperature, are determined. It is shown that in the case of diffuse reflection of phonons from the boundaries, the plane with the (100) orientation exhibits the lowest scattering ability (and the highest thermal conductivity), while the plane with the (111) orientation is characterized bymore » the highest scattering ability (and the lowest thermal conductivity). The thermal conductivity of wide films is determined to a considerable extent by the orientation of the film plane, while for nanowires with a square cross section, the thermal conductivity is mainly determined by the direction of the heat flux. The effect of elastic energy anisotropy on the dependences of the thermal conductivity on the geometrical parameters of films is analyzed. The temperatures of transition from boundary scattering to bulk relaxation mechanisms are determined.« less

  15. Disparities in Weight and Weight Behaviors by Sexual Orientation in College Students

    PubMed Central

    VanKim, Nicole A.; Erickson, Darin J.; Lust, Katherine; Eisenberg, Marla E.; Rosser, B. R. Simon

    2015-01-01

    Objectives. We assessed disparities in weight and weight-related behaviors among college students by sexual orientation and gender. Methods. We performed cross-sectional analyses of pooled annual data (2007–2011; n = 33 907) from students participating in a Minnesota state-based survey of 40 two- and four-year colleges and universities. Sexual orientation included heterosexual, gay or lesbian, bisexual, unsure, and discordant heterosexual (heterosexuals engaging in same-sex sexual experiences). Dependent variables included weight status (derived from self-reported weight and height), diet (fruits, vegetables, soda, fast food, restaurant meals, breakfast), physical activity, screen time, unhealthy weight control, and body satisfaction. Results. Bisexual and lesbian women were more likely to be obese than heterosexual and discordant heterosexual women. Bisexual women were at high risk for unhealthy weight, diet, physical activity, and weight control behaviors. Gay and bisexual men exhibited poor activity patterns, though gay men consumed significantly less regular soda (and significantly more diet soda) than heterosexual men. Conclusions. We observed disparities in weight-, diet-, and physical activity–related factors across sexual orientation among college youths. Additional research is needed to better understand these disparities and the most appropriate intervention strategies to address them. PMID:25393177

  16. Anisotropic Negative Thermal Expansion Behavior of the As-Fabricated Ti-Rich and Equiatomic Ti-Ni Alloys Induced by Preferential Grain Orientation

    NASA Astrophysics Data System (ADS)

    Zhao, Zhong-Xun; Ma, Xiao; Cao, Shan-Shan; Ke, Chang-Bo; Zhang, Xin-Ping

    2017-12-01

    The present study focuses on the anisotropic negative thermal expansion (NTE) behaviors of Ti-rich (Ti54Ni46) and equiatomic Ti-Ni (Ti50Ni50) alloys fabricated by vacuum arc melting and without subsequent plastic deformation. Both alloys exhibit NTE responses in vertical and horizontal directions, and the total strains and CTEs of the NTE stage along the two mutually perpendicular measuring directions are obviously different, indicating obvious anisotropic NTE behavior of the alloys. Besides, the numerical differences between the starting temperature of NTE and austenitic transformation and between the finishing temperature of NTE and austenitic transformation are very small, which indicates that an apparent relationship exists between the NTE behavior and the phase transformation. The microstructure in the vertical cross sections shows obviously preferential orientation characteristics: Ti2Ni phases of both alloys grow along the vertical direction, and B19' martensite of Ti50Ni50 alloy has distinct preferential orientation, which results from a large temperature gradient between the top and the bottom of the button ingots during solidification. The microstructure with preferential orientation induces the anisotropic NTE behavior of the samples.

  17. Consumers' health-related motive orientations and ready meal consumption behaviour.

    PubMed

    Geeroms, Nele; Verbeke, Wim; Van Kenhove, Patrick

    2008-11-01

    Based on a multidimensional perspective on the meaning of health, this study explores associations between consumers' health-related motive orientations (HRMO) and ready meal consumption behaviour. Cross-sectional data were collected from a sample of 1934 Flemish consumers through an on-line survey. The respondents rated 45 health statements referring to people's motives for pursuing health. The survey also assessed information on several aspects of ready meal consumption, i.e. consumption frequency, beliefs and attitudes toward ready meals and ready meal buying criteria. Based on a two-step cluster analysis, we identified five distinct subgroups in the sample, according to their HRMO: health is about energy (Energetic Experimenters), emotional well-being/enjoying life (Harmonious Enjoyers), social responsibility/physical well-being (Normative Carers), achievement/outward appearance (Conscious Experts) and autonomy (Rationalists). Ready meal consumption patterns differed between these segments, with Energetic Experimenters and Conscious Experts showing significantly more positive attitudes, stronger beliefs and both higher penetration and consumption frequency related to ready meals, compared to Harmonious Enjoyers, Normative Carers and Rationalists. These findings may relate to the individualistic versus altruistic health orientation perspective of the identified segments, and are valuable in the context of improving consumer-oriented product development, positioning and marketing of ready meals.

  18. Transference and insight in psychotherapy with gay and bisexual male clients: the role of sexual orientation identity integration.

    PubMed

    Mohr, Jonathan J; Fuertes, Jairo N; Stracuzzi, Thomas I

    2015-03-01

    Clinical writing has suggested that the therapeutic process and relationship in work with lesbian, gay, and bisexual clients may be influenced by the extent to which clients have accepted their sexual orientation and developed a social network supportive of their sexual orientation, a construct we refer to as sexual orientation identity integration. The present cross-sectional study investigated this proposition by examining the identity integration ratings of 90 gay and bisexual male clients in relation to elements of treatment as rated by both the therapist (insight, negative transference, working alliance, session depth, and client improvement) and client (working alliance, session depth, and client improvement). Participants were male-male therapy dyads recruited from lesbian, gay, and bisexual-affirming practices. Client identity integration was negatively associated with transference, and positively associated with ratings of insight, alliance, depth, and improvement. Insight, but not transference, uniquely mediated the positive association between identity integration and most indicators of therapeutic quality. Results from an exploratory model suggested that transference may indirectly influence therapeutic quality by serving as a barrier to insight. (PsycINFO Database Record (c) 2015 APA, all rights reserved).

  19. Disparities in Weight and Weight Behaviors by Sexual Orientation in College Students.

    PubMed

    Laska, Melissa N; VanKim, Nicole A; Erickson, Darin J; Lust, Katherine; Eisenberg, Marla E; Rosser, B R Simon

    2015-01-01

    Objectives. We assessed disparities in weight and weight-related behaviors among college students by sexual orientation and gender. Methods. We performed cross-sectional analyses of pooled annual data (2007-2011; n = 33 907) from students participating in a Minnesota state-based survey of 40 two- and four-year colleges and universities. Sexual orientation included heterosexual, gay or lesbian, bisexual, unsure, and discordant heterosexual (heterosexuals engaging in same-sex sexual experiences). Dependent variables included weight status (derived from self-reported weight and height), diet (fruits, vegetables, soda, fast food, restaurant meals, breakfast), physical activity, screen time, unhealthy weight control, and body satisfaction. Results. Bisexual and lesbian women were more likely to be obese than heterosexual and discordant heterosexual women. Bisexual women were at high risk for unhealthy weight, diet, physical activity, and weight control behaviors. Gay and bisexual men exhibited poor activity patterns, though gay men consumed significantly less regular soda (and significantly more diet soda) than heterosexual men. Conclusions. We observed disparities in weight-, diet-, and physical activity-related factors across sexual orientation among college youths. Additional research is needed to better understand these disparities and the most appropriate intervention strategies to address them.

  20. Anisotropic Negative Thermal Expansion Behavior of the As-Fabricated Ti-Rich and Equiatomic Ti-Ni Alloys Induced by Preferential Grain Orientation

    NASA Astrophysics Data System (ADS)

    Zhao, Zhong-Xun; Ma, Xiao; Cao, Shan-Shan; Ke, Chang-Bo; Zhang, Xin-Ping

    2018-03-01

    The present study focuses on the anisotropic negative thermal expansion (NTE) behaviors of Ti-rich (Ti54Ni46) and equiatomic Ti-Ni (Ti50Ni50) alloys fabricated by vacuum arc melting and without subsequent plastic deformation. Both alloys exhibit NTE responses in vertical and horizontal directions, and the total strains and CTEs of the NTE stage along the two mutually perpendicular measuring directions are obviously different, indicating obvious anisotropic NTE behavior of the alloys. Besides, the numerical differences between the starting temperature of NTE and austenitic transformation and between the finishing temperature of NTE and austenitic transformation are very small, which indicates that an apparent relationship exists between the NTE behavior and the phase transformation. The microstructure in the vertical cross sections shows obviously preferential orientation characteristics: Ti2Ni phases of both alloys grow along the vertical direction, and B19' martensite of Ti50Ni50 alloy has distinct preferential orientation, which results from a large temperature gradient between the top and the bottom of the button ingots during solidification. The microstructure with preferential orientation induces the anisotropic NTE behavior of the samples.

  1. New method for determining central axial orientation of flux rope embedded within current sheet using multipoint measurements

    NASA Astrophysics Data System (ADS)

    Li, ZhaoYu; Chen, Tao; Yan, GuangQing

    2016-10-01

    A new method for determining the central axial orientation of a two-dimensional coherent magnetic flux rope (MFR) via multipoint analysis of the magnetic-field structure is developed. The method is devised under the following geometrical assumptions: (1) on its cross section, the structure is left-right symmetric; (2) the projected structure velocity is vertical to the line of symmetry. The two conditions can be naturally satisfied for cylindrical MFRs and are expected to be satisfied for MFRs that are flattened within current sheets. The model test demonstrates that, for determining the axial orientation of such structures, the new method is more efficient and reliable than traditional techniques such as minimum-variance analysis of the magnetic field, Grad-Shafranov (GS) reconstruction, and the more recent method based on the cylindrically symmetric assumption. A total of five flux transfer events observed by Cluster are studied using the proposed approach, and the application results indicate that the observed structures, regardless of their actual physical properties, fit the assumed geometrical model well. For these events, the inferred axial orientations are all in excellent agreement with those obtained using the multi-GS reconstruction technique.

  2. Geologic map of the Shaida deposit and Misgaran prospect, Herat Province, Afghanistan, modified from the 1973 original map compilation of V.I. Tarasenko and others

    USGS Publications Warehouse

    Tucker, Robert D.; Stettner, Will R.; Masonic, Linda M.; Moran, Thomas W.

    2014-01-01

    This map is a modified version of Geological map and map of useful minerals, Shaida area, scale 1:50,000, which was compiled by V.I. Tarasenko, N.I. Borozenets, and others in 1973. Scientists from the U.S. Geological Survey, in cooperation with the Afghan Geological Survey and the Task Force for Business and Stability Operations of the U.S. Department of Defense, studied the original document and related reports and also visited the field area in August 2010.This modified map illustrates the geological structure of the Shaida copper-lead-zinc deposit and Misgaran copper-lead-zinc prospect in western Afghanistan and includes cross sections of the same area. The map reproduces the topology (contacts, faults, and so forth) of the original Soviet map and cross sections and includes modifications based on our examination of these documents and on observations made during our field visit. Elevations on the cross sections are derived from the original Soviet topography and might not match the newer topography used on the current map. We have attempted to translate the original Russian terminology and rock classification into modern English geologic usage as literally as possible without changing any genetic or process-oriented implications in the original descriptions. We also use the age designations from the original map.The unit colors on the map and cross sections differ from the colors shown on the original version. The units are colored according to the color and pattern scheme of the Commission for the Geological Map of the World (CGMW) (http://www.ccgm.org).

  3. Afternoon Napping and Cognition in Chinese Older Adults: Findings from the China Health and Retirement Longitudinal Study Baseline Assessment.

    PubMed

    Li, Junxin; Cacchione, Pamela Z; Hodgson, Nancy; Riegel, Barbara; Keenan, Brendan T; Scharf, Mathew T; Richards, Kathy C; Gooneratne, Nalaka S

    2017-02-01

    To examine the cross-sectional associations between self-reported postlunch napping and structured cognitive assessments in Chinese older adults. Cross-sectional cohort study. China. Individuals aged 65 and older from the baseline national wave of the China Health and Retirement Longitudinal Study (CHARLS) (N = 2,974). Interview-based cognitive assessments of orientation and attention, episodic memory, visuospatial abilities, and a combined global cognition score incorporating these assessments. Other self-reported or interview-based assessments included postlunch napping duration, nighttime sleep duration, demographic characteristics, health habits, comorbidities, functional status and social activities. According to reported napping duration, older adults were categorized as non-nappers (0 minutes), short nappers (<30 minutes), moderate nappers (30-90 minutes), and extended nappers (>90 minutes). Postlunch napping was reporting in 57.7% of participants for a mean of 63 minutes. Cognitive function was significantly associated with napping (P < .001). Between-group comparisons showed that moderate nappers had better overall cognition than nonnappers (P < .001) or extended nappers (P = .01). Nonnappers also had significantly poorer cognition than short nappers (P = .03). In multiple regression analysis, moderate napping was significantly associated with better cognition than non- (P = .004), short (P = .04), and extended napping (P = .002), after controlling for demographic characteristics, body mass index, depression, instrumental activities of daily living, social activities, and nighttime sleep duration. A cross-sectional association was found between moderate postlunch napping and better cognition in Chinese older adults. The cross-sectional design and self-reported measures of sleep limited the findings. Longitudinal studies with objective napping measures are needed to further test this hypothesis. © 2016, Copyright the Authors Journal compilation © 2016, The American Geriatrics Society.

  4. A grillage model for predicting wrinkles in annular graphene under circular shearing

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Zhang, Z.; Duan, W. H.; Wang, C. M.

    This paper is concerned with a Timoshenko grillage model for modeling the wrinkling phenomenon in annular graphene under circular shearing applied at its inner edge. By calibrating the grillage model results against the molecular mechanics (MM) results, the grillage model comprising beams of elliptical cross-section orientated along the carbon-carbon bond has section dimensions of 0.06 nm for the major axis length and 0.036 nm for the minor axis length. Moreover, the beams are connected to one another at 0.00212 nm from the geometric centric. This eccentric connection of beams allows the proposed grillage model to cater for the cross-couplings amongmore » bonds that produce the out-of-plane wrinkling pattern. The out-of-plane to in-plane bending stiffnesses' ratio is 0.36, and the cross bending stiffness provided by the ellipse eccentricity is 0.025 times that of the in-plane bending stiffness. Besides furnishing identical wave numbers as well as amplitudes and wavelengths that are in good agreement with MM results, the grillage model can capture wrinkling patterns with a boundary layer, whereas plate and membrane models could not mimic the boundary layer.« less

  5. Postencoding cognitive processes in the cross-race effect: Categorization and individuation during face recognition.

    PubMed

    Ho, Michael R; Pezdek, Kathy

    2016-06-01

    The cross-race effect (CRE) describes the finding that same-race faces are recognized more accurately than cross-race faces. According to social-cognitive theories of the CRE, processes of categorization and individuation at encoding account for differential recognition of same- and cross-race faces. Recent face memory research has suggested that similar but distinct categorization and individuation processes also occur postencoding, at recognition. Using a divided-attention paradigm, in Experiments 1A and 1B we tested and confirmed the hypothesis that distinct postencoding categorization and individuation processes occur during the recognition of same- and cross-race faces. Specifically, postencoding configural divided-attention tasks impaired recognition accuracy more for same-race than for cross-race faces; on the other hand, for White (but not Black) participants, postencoding featural divided-attention tasks impaired recognition accuracy more for cross-race than for same-race faces. A social categorization paradigm used in Experiments 2A and 2B tested the hypothesis that the postencoding in-group or out-group social orientation to faces affects categorization and individuation processes during the recognition of same-race and cross-race faces. Postencoding out-group orientation to faces resulted in categorization for White but not for Black participants. This was evidenced by White participants' impaired recognition accuracy for same-race but not for cross-race out-group faces. Postencoding in-group orientation to faces had no effect on recognition accuracy for either same-race or cross-race faces. The results of Experiments 2A and 2B suggest that this social orientation facilitates White but not Black participants' individuation and categorization processes at recognition. Models of recognition memory for same-race and cross-race faces need to account for processing differences that occur at both encoding and recognition.

  6. The Association between Cultural Orientation and Drinking Behaviors among University Students in Wuhan, China

    PubMed Central

    Tang, Hongxiu; Cai, Weibin; Wang, Hongjing; Zhang, Qing; Qian, Ling; Shell, Duane F.; Newman, Ian M.; Yin, Ping

    2013-01-01

    Objectives This study examines the association between cultural orientation and drinking behaviors among university students. Cultural orientation is the measure of how the cultural values of individuals living in their own society are influenced by cultural values introduced from the outside. Methods In 2011, a cross-sectional survey collected data from 1279 university students from six universities in central China. Participants used a likert scale to rank a series of statements reflecting cultural values from the previously validated Chinese Cultural Orientation Scale and answered questions about their drinking behaviors and socio-demographic characteristics. Results Statistically significant differences in cultural orientation were observed for gender, hometown and type of university attendance. Traditional-oriented students were more likely to be occasional drinkers or nondrinkers, while marginal-oriented students, bicultural-oriented students and western-oriented students were more likely to be regular drinkers. Bicultural orientation (OR = 1.80, P<0.05) and marginal orientation (OR = 1.64, P<0.05) increased the likelihood of the student being regular drinking, compared to students with traditional orientations. Males (OR = 4.40, P<0.05) had a higher likelihood of regular drinking than females, graduate students (OR = 2.59, P<0.05) had a higher likelihood of regular drinking than undergraduates, students from urban areas (OR = 1.79, P<0.05) had a higher likelihood of regular drinking than those from towns/rural areas, and students attending key universities (OR = 0.48, P<0.05) had a lower likelihood of regular drinking than those attending general universities. Conclusions Cultural orientation influences drinking behaviors. Traditional cultural orientation was associated with less drinking while western cultural orientation, marginal cultural orientation and bicultural orientation were associated with more drinking. The role of gender, hometown and university attendance is partially moderated through the influence of cultural orientation. The relationship between a traditional cultural orientation and alcohol drinking suggests that traditional Chinese cultural values should be examined for their role in possibly reducing alcohol-related risks through education and policy initiatives. PMID:23359611

  7. Cross-Cultural Communication in Oncology: Challenges and Training Interests.

    PubMed

    Weber, Orest; Sulstarova, Brikela; Singy, Pascal

    2016-01-01

    To survey oncology nurses and oncologists about difficulties in taking care of culturally and linguistically diverse patients and about interests in cross-cultural training.
. Descriptive, cross-sectional.
. Web-based survey.
. 108 oncology nurses and 44 oncologists. 
. 31-item questionnaire derived from preexisting surveys in the United States and Switzerland.
. Self-rated difficulties in taking care of culturally and linguistically diverse patients and self-rated interests in cross-cultural training.
. All respondents reported communication difficulties in encounters with culturally and linguistically diverse patients. Respondents considered the absence of written materials in other languages, absence of a shared common language with patients, and sensitive subjects (e.g., end of life, sexuality) to be particularly problematic. Respondents also expressed a high level of interest in all aspects of cross-cultural training (task-oriented skills, background knowledge, reflexivity, and attitudes). Nurses perceived several difficulties related to care of migrants as more problematic than physicians did and were more interested in all aspects of cross-cultural training. 
. The need for cross-cultural training is high among oncology clinicians, particularly among nurses.
. The results reported in the current study may help nurses in decision-making positions and educators in introducing elements of cross-cultural education into oncology curricula for nurses. Cross-cultural training should be offered to oncology nurses.

  8. Helicity-dependent cross sections and double-polarization observable E in η photoproduction from quasifree protons and neutrons

    NASA Astrophysics Data System (ADS)

    Witthauer, L.; Dieterle, M.; Abt, S.; Achenbach, P.; Afzal, F.; Ahmed, Z.; Akondi, C. S.; Annand, J. R. M.; Arends, H. J.; Bashkanov, M.; Beck, R.; Biroth, M.; Borisov, N. S.; Braghieri, A.; Briscoe, W. J.; Cividini, F.; Costanza, S.; Collicott, C.; Denig, A.; Downie, E. J.; Drexler, P.; Ferretti-Bondy, M. I.; Gardner, S.; Garni, S.; Glazier, D. I.; Glowa, D.; Gradl, W.; Günther, M.; Gurevich, G. M.; Hamilton, D.; Hornidge, D.; Huber, G. M.; Käser, A.; Kashevarov, V. L.; Kay, S.; Keshelashvili, I.; Kondratiev, R.; Korolija, M.; Krusche, B.; Lazarev, A. B.; Linturi, J. M.; Lisin, V.; Livingston, K.; Lutterer, S.; MacGregor, I. J. D.; Mancell, J.; Manley, D. M.; Martel, P. P.; Metag, V.; Meyer, W.; Miskimen, R.; Mornacchi, E.; Mushkarenkov, A.; Neganov, A. B.; Neiser, A.; Oberle, M.; Ostrick, M.; Otte, P. B.; Paudyal, D.; Pedroni, P.; Polonski, A.; Prakhov, S. N.; Rajabi, A.; Reicherz, G.; Ron, G.; Rostomyan, T.; Sarty, A.; Sfienti, C.; Sikora, M. H.; Sokhoyan, V.; Spieker, K.; Steffen, O.; Strakovsky, I. I.; Strub, Th.; Supek, I.; Thiel, A.; Thiel, M.; Thomas, A.; Unverzagt, M.; Usov, Yu. A.; Wagner, S.; Walford, N. K.; Watts, D. P.; Werthmüller, D.; Wettig, J.; Wolfes, M.; Zana, L.; A2 Collaboration at MAMI

    2017-05-01

    Precise helicity-dependent cross sections and the double-polarization observable E were measured for η photoproduction from quasifree protons and neutrons bound in the deuteron. The η →2 γ and η →3 π0→6 γ decay modes were used to optimize the statistical quality of the data and to estimate systematic uncertainties. The measurement used the A2 detector setup at the tagged photon beam of the electron accelerator MAMI in Mainz. A longitudinally polarized deuterated butanol target was used in combination with a circularly polarized photon beam from bremsstrahlung of a longitudinally polarized electron beam. The reaction products were detected with the electromagnetic calorimeters Crystal Ball and TAPS, which covered 98% of the full solid angle. The results show that the narrow structure observed earlier in the unpolarized excitation function of η photoproduction off the neutron appears only in reactions with antiparallel photon and nucleon spin (σ1 /2). It is absent for reactions with parallel spin orientation (σ3 /2) and thus very probably related to partial waves with total spin 1/2. The behavior of the angular distributions of the helicity-dependent cross sections was analyzed by fitting them withLegendre polynomials. The results are in good agreement with a model from the Bonn-Gatchina group, which uses an interference of P11 and S11 partial waves to explain the narrow structure.

  9. ANITA-IEAF activation code package - updating of the decay and cross section data libraries and validation on the experimental data from the Karlsruhe Isochronous Cyclotron

    NASA Astrophysics Data System (ADS)

    Frisoni, Manuela

    2017-09-01

    ANITA-IEAF is an activation package (code and libraries) developed in the past in ENEA-Bologna in order to assess the activation of materials exposed to neutrons with energies greater than 20 MeV. An updated version of the ANITA-IEAF activation code package has been developed. It is suitable to be applied to the study of the irradiation effects on materials in facilities like the International Fusion Materials Irradiation Facility (IFMIF) and the DEMO Oriented Neutron Source (DONES), in which a considerable amount of neutrons with energies above 20 MeV is produced. The present paper summarizes the main characteristics of the updated version of ANITA-IEAF, able to use decay and cross section data based on more recent evaluated nuclear data libraries, i.e. the JEFF-3.1.1 Radioactive Decay Data Library and the EAF-2010 neutron activation cross section library. In this paper the validation effort related to the comparison between the code predictions and the activity measurements obtained from the Karlsruhe Isochronous Cyclotron is presented. In this integral experiment samples of two different steels, SS-316 and F82H, pure vanadium and a vanadium alloy, structural materials of interest in fusion technology, were activated in a neutron spectrum similar to the IFMIF neutron field.

  10. Control of Rotational Energy and Angular Momentum Orientation with an Optical Centrifuge

    NASA Astrophysics Data System (ADS)

    Ogden, Hannah M.; Murray, Matthew J.; Mullin, Amy S.

    2017-04-01

    We use an optical centrifuge to trap and spin molecules to an angular frequency of 30 THz with oriented angular momenta and extremely high rotational energy and then investigate their subsequent collision dynamics with transient high resolution IR spectroscopy. The optical centrifuge is formed by combining oppositely-chirped pulses of 800 nm light, and overlapping them spatially and temporally. Polarization-sensitive Doppler-broadened line profiles characterize the anisotropic kinetic energy release of the super rotor molecules, showing that they behave like molecular gyroscopes. Studies are reported for collisions of CO2 super rotors with CO2, He and Ar. These studies reveal how mass, velocity and rotational adiabaticity impact the angular momentum relaxation and reorientation. Quantum scattering calculations provide insight into the J-specific collision cross sections that control the relaxation. NSF-CHE 105 8721.

  11. Posttraumatic Growth and Bereavement: The Contribution of Self-Determination Theory.

    PubMed

    Lumb, Andrew B; Beaudry, Myriam; Blanchard, Celine

    2017-09-01

    No research drawing from Self-Determination Theory has investigated the bereavement experience of individuals or how motivation can help facilitate posttraumatic growth (PTG) following the death of a loved one. In two cross-sectional studies, university students completed an online survey. Study 1 investigated the contribution of global autonomous and controlled motivation in statistically predicting PTG above and beyond previously researched correlates. Study 2 explored the mediating role of cognitive appraisals and coping in explaining the relationship between global motivation orientations and PTG. Results indicated that in comparison to controlled motivation, autonomous motivation was positively related PTG, even after controlling for previously researched correlates. Mediation results indicated an indirect effect of global autonomous motivation on PTG through task-oriented coping. Collectively, these findings suggest the importance of incorporating motivation into models of PTG. Clinical implications of these findings are also discussed.

  12. 3D modelling of the flow of self-compacting concrete with or without steel fibres. Part II: L-box test and the assessment of fibre reorientation during the flow

    NASA Astrophysics Data System (ADS)

    Deeb, R.; Kulasegaram, S.; Karihaloo, B. L.

    2014-12-01

    The three-dimensional Lagrangian particle-based smooth particle hydrodynamics method described in Part I of this two-part paper is used to simulate the flow of self-compacting concrete (SCC) with and without steel fibres in the L-box configuration. As in Part I, the simulation of the SCC mixes without fibres emphasises the distribution of large aggregate particles of different sizes throughout the flow, whereas the simulation of high strength SCC mixes which contain steel fibres is focused on the distribution of fibres and their orientation during the flow. The capabilities of this methodology are validated by comparing the simulation results with the L-box test carried out in the laboratory. A simple method is developed to assess the reorientation and distribution of short steel fibres in self-compacting concrete mixes during the flow. The reorientation of the fibres during the flow is used to estimate the fibre orientation factor (FOF) in a cross section perpendicular to the principal direction of flow. This estimation procedure involves the number of fibres cut by the section and their inclination to the cutting plane. This is useful to determine the FOF in practical image analysis on cut sections.

  13. A Micromagnetic Study of Medium Orientation Ratio Effects in High Areal Density Recording

    NASA Astrophysics Data System (ADS)

    Plumer, Martin; van Ek, Johannes

    2000-03-01

    An extensive analysis of written tracks on granular media with anisotropy axes preferentially oriented either in the down-track or cross-track direction was performed with a newly developed micromagnetic model of magnetic recording [1]. The response of planar media to writer head fields, derived from the Finite-Element-Method, is calculated by solving the LLG equations. Signal from the written transitions is determined through a micromagnetic model of a GMR spin-valve device. Using fields from a generic 10Gb/in2 head (TPWG=0.6um, gap=0.2um, 1.8T materials around the gap), dibits were written at high linear density. Relative to the isotropic case, both erase bands and read-back voltage deteriorate for cross-track oriented media and improve in the down-track orientation case. For an orientation ratio of 1.23, the read-back signal at 200 kbpi drops by 15% in the radial case and increases by 15% in the circumferential case. Although the cross-track coercivity is smaller for down-track oriented media, and thus easier to write with the corners of the head, the remnant cross-track magnetization is correspondingly smaller. Track edge distortion is thus less severe than for isotropic media. Oriented media is of interest due to enhanced thermal stability and faster switching times [2]. [1] J. van Ek, M.L. Plumer, H. Zhou and H.N. Bertram, ``A Micromagnetic Recording Model for Write and Read-back," in preparation. Also see the GMAG symposium, this conference. [2] E.N. Abarra, I. Okamoto and M. Shinohara, IEEE Trans. Mag. 35, 2709 (1999).

  14. Polarization insensitive all-fiber mode-lockers functioned by carbon nanotubes deposited onto tapered fibers

    NASA Astrophysics Data System (ADS)

    Song, Yong-Won; Morimune, Keiyo; Set, Sze Y.; Yamashita, Shinji

    2007-01-01

    The authors demonstrate a nonblocked all-fiber mode locker operated by the interaction of carbon nanotubes with the evanescent field of propagating light in a tapered fiber. Symmetric cross section of the device with the randomly oriented nanotubes guarantees the polarization insensitive operation of the pulse formation. In order to minimize the scattering, the carbon nanotubes are deposited within a designed area around the tapered waist. The demonstrated passively pulsed laser has the repetition rate of 7.3MHz and the pulse width of 829fs.

  15. The Construction and Calibration of a LADAR (Laser Detection and Ranging) Cross-Section Measurement Range

    DTIC Science & Technology

    1985-12-01

    resonator optics consist of two porro prisms which are oriented 900 from one another about the cavity’s optical axis. In other words, the roof edges of each... prism are perpendicular to one another. The Nd:YAG laser rod measures 5 mm in diameter by 75 mm long and is optically pumped by a Xenon flashlamp. Q...Switching of the laser is performed by a Pockels Cell. A dielectric polarizer is sealed between two right angle prisms which are joined symetrically

  16. Dynamic characteristics of specialty composite structures with embedded damping layers

    NASA Technical Reports Server (NTRS)

    Saravanos, D. A.; Chamis, C. C.

    1993-01-01

    Damping mechanics for simulating the damped dynamic characteristics in specialty composite structures with compliant interlaminar damping layers are presented. Finite-element based mechanics incorporating a discrete layer (or layer-wise) laminate damping theory are utilized to represent general laminate configurations in terms of lay-up and fiber orientation angles, cross-sectional thickness, shape, and boundary conditions. Evaluations of the method with exact solutions and experimental data illustrate the accuracy of the method. Additional applications investigate the potential for significant damping enhancement in angle-ply composite laminates with cocured interlaminar damping layers.

  17. Design of three-dimensional scramjet inlets for hypersonic propulsion

    NASA Technical Reports Server (NTRS)

    Simmons, J. M.; Weidner, E. H.

    1986-01-01

    The paper outlines an approach to the design of three-dimensional inlets for scramjet engines. The basis of the techniques used is the method of streamline tracing through an inviscid axisymmetric flow field. A technique is described for making a smooth change of cross-section shape from rectangular to circular. A feature is the considerable use of computer-graphics to provide a 'user-oriented' procedure which can produce promising design configurations for subsequent analysis with CFD codes. An example is given to demonstrate the capabilities of the design techniques.

  18. The possibility of a new resonance of three-body linear chain structure in the reaction 12C+16O at Ec.mapprox-33.5MeV

    NASA Astrophysics Data System (ADS)

    Kong, Xiangjing; P, L. Li; J, J. Kolata; A, Morsad; L, Goetting; R, A. Kryger; S, Dixit; R, Tighe; W, Chune

    1990-05-01

    There is a peak in the excitation function of total cross section of low energy α-particles in the reaction 12C+16O at Ec.m approx33.5MeV. The experimental distribution of α-particle emitted event has been obtained. The result of theoretical calculation roughly agrees with experimental data, gives an orientation where three-body resonances can be expected, and the information on internal structure of three-body linear chain molecule.

  19. Anatomy and biomechanics of gluteus maximus and the thoracolumbar fascia at the sacroiliac joint.

    PubMed

    Barker, P J; Hapuarachchi, K S; Ross, J A; Sambaiew, E; Ranger, T A; Briggs, C A

    2014-03-01

    Biomechanical models predict that recruitment of gluteus maximus (GMax) will exert a compressive force across the sacroiliac joint (SIJ), yet this muscle requires morphologic assessment. The aims of this study were to document GMax's proximal attachments and assess their capacity to generate forces including compressive force at the SIJ. In 11 embalmed cadaver limbs, attachments of GMax crossing the SIJ were dissected and their fascicle orientation, length and attachment volume documented. The physiological cross-sectional area (PCSA) of each attachment was calculated along with its estimated maximum force at the SIJ and lumbar spine. GMax fascicles originated from the gluteus medius fascia, ilium, thoracolumbar fascia, erector spinae aponeurosis, sacrum, coccyx, dorsal sacroiliac and sacrotuberous ligaments in all specimens. Their mean fascicle orientation ranged from 32 to 45° below horizontal and mean length from 11 to 18 cm. The mean total PCSA of GMax was 26 cm(2) (range 16-36), of which 70% crossed the SIJ. The average maximum force predicted to be generated by GMax's total attachments crossing each SIJ was 891 N (range 572-1,215), of which 70% (702 N: range 450-1,009) could act perpendicular to the plane of the SIJ. The capacity of GMax to generate an extensor moment at lower lumbar segments was estimated at 4 Nm (range 2-9.5). GMax may generate compressive forces at the SIJ through its bony and fibrous attachments. These may assist effective load transfer between lower limbs and trunk. Copyright © 2013 Wiley Periodicals, Inc.

  20. Feasibility study of a layer-oriented wavefront sensor for solar telescopes.

    PubMed

    Marino, Jose; Wöger, Friedrich

    2014-02-01

    Solar multiconjugate adaptive optics systems rely on several wavefront sensors, which measure the incoming turbulent phase along several field directions to produce a tomographic reconstruction of the turbulent phase. In this paper, we explore an alternative wavefront sensing approach that attempts to directly measure the turbulent phase present at a particular height in the atmosphere: a layer-oriented cross-correlating Shack-Hartmann wavefront sensor (SHWFS). In an experiment at the Dunn Solar Telescope, we built a prototype layer-oriented cross-correlating SHWFS system conjugated to two separate atmospheric heights. We present the data obtained in the observations and complement these with ray-tracing computations to achieve a better understanding of the instrument's performance and limitations. The results obtained in this study strongly indicate that a layer-oriented cross-correlating SHWFS is not a practical design to measure the wavefront at a high layer in the atmosphere.

  1. Earth Orientation Help - Naval Oceanography Portal

    Science.gov Websites

    section Advanced Search... Sections Home Time Earth Orientation Astronomy Meteorology Oceanography Ice You are here: Home › Help › Earth Orientation Help USNO Logo USNO Info Earth Orientation Help Send an e-mail regarding Earth Orientation products. Privacy Advisory Your E-Mail Address Subject ■ Select

  2. A Cross-Case Analysis of Three Social Justice-Oriented Education Programs

    ERIC Educational Resources Information Center

    Rodriguez, Mariela A.; Chambers, Terah Venzant; Gonzalez, Maria Luisa; Scheurich, James Joseph

    2010-01-01

    This cross-case analysis was based on three main questions that addressed three social justice-oriented education programs. The three questions were: 1) What critical elements underlie programs that prepare professionals for social justice? 2) What can we learn from these programs in support of educational-leadership programs whose aim is to…

  3. Comparison of fiber orientation and tensile-stiffness orientation measurements in paper

    Treesearch

    David W. Vahey; John M. Considine; Andy Kahra; Mark Scotch

    2008-01-01

    We have had the opportunity to subject cross-machine paper strips from two mills to both ultrasound and optical "fiber-orientation" tests to examine the relationships between the results. Both determine an orientation angle, in degrees. Both measure sheet anisotropy as an MD/CD orientation ratio. The optical test has no counterpart to the ultrasonic...

  4. Alignment and pulse-duration effects in two-photon double ionization of H2 by femtosecond XUV laser pulses

    NASA Astrophysics Data System (ADS)

    Guan, Xiaoxu; Bartschat, Klaus; Schneider, Barry I.; Koesterke, Lars

    2014-10-01

    We present calculations for the dependence of the two-photon double ionization (DI) of H2 on the relative orientation of the linear laser polarization to the internuclear axis and the length of the pulse. We use the fixed-nuclei approximation at the equilibrium distance of 1.4 a0, where a0=0.529 ×10-10m is the Bohr radius. Central photon energies cover the entire direct DI domain from 26.5 to 34.0 eV. In contrast to the parallel geometry studied earlier [X. Guan, K. Bartschat, B. I. Schneider, and L. Koesterke, Phys. Rev. A 83, 043403 (2011), 10.1103/PhysRevA.83.043403], the effect of the pulse duration is almost negligible for the case when the two axes are perpendicular to each other. This is a consequence of the symmetry rules for dipole excitation in the two cases. In the parallel geometry, doubly excited states of 1Σu+ symmetry affect the cross section, while in the perpendicular geometry only much longer-lived 1Πu states are present. This accounts for the different convergence patterns observed in the calculated cross sections as a function of the pulse length. When the photon energy approaches the threshold of sequential DI, a sharp increase of the generalized total cross section (GTCS) with increasing pulse duration is also observed in the perpendicular geometry, very similar to the case of the molecular axis being oriented along the laser polarization direction. Our results differ from those of Colgan et al. [J. Colgan, M. S. Pindzola, and F. Robicheaux, J. Phys. B 41, 121002 (2008), 10.1088/0953-4075/41/12/121002] and Morales et al. [F. Morales, F. Martín, D. A. Horner, T. N. Rescigno, and C. W. McCurdy, J. Phys. B 42, 134013 (2009), 10.1088/0953-4075/42/13/134013], but are in excellent agreement with the GTCSs of Simonsen et al. [A. S. Simonsen, S. A. Sørngård, R. Nepstad, and M. Førre, Phys. Rev. A 85, 063404 (2012), 10.1103/PhysRevA.85.063404] over the entire domain of direct DI.

  5. A user's manual for the Electromagnetic Surface Patch code: ESP version 3

    NASA Technical Reports Server (NTRS)

    Newman, E. H.; Dilsavor, R. L.

    1987-01-01

    This report serves as a user's manual for Version III of the Electromagnetic Surface Patch Code or ESP code. ESP is user-oriented, based on the method of moments (MM) for treating geometries consisting of an interconnection of thin wires and perfectly conducting polygonal plates. Wire/plate junctions must be about 0.1 lambda or more from any plate edge. Several plates may intersect along a common edge. Excitation may be by either a delta-gap voltage generator or by a plane wave. The thin wires may have finite conductivity and also may contain lumped loads. The code computes most of the usual quantities of interest such as current distribution, input impedance, radiation efficiency, mutual coupling, far zone gain patterns (both polarizations) and radar-cross-section (both/cross polarizations).

  6. Orientation-dependent structural and photocatalytic properties of LaCoO3 epitaxial nano-thin films

    PubMed Central

    Zhang, Yan-ping; Hu, Hai-long; Xie, Rui-shi; Ma, Guo-hua; Huo, Ji-chuan; Wang, Hai-bin

    2018-01-01

    LaCoO3 epitaxial films were grown on (100), (110) and (111) oriented LaAlO3 substrates by the polymer-assisted deposition method. Crystal structure measurement and cross-section observation indicate that all the LaCoO3 films are epitaxially grown in accordance with the orientation of LaAlO3 substrates, with biaxial compressive strain in the ab plane. Owing to the different strain directions of CoO6 octahedron, the mean Co–O bond length increases by different amounts in (100), (110) and (111) oriented films compared with that of bulk LaCoO3, and the (100) oriented LaCoO3 has the largest increase. Photocatalytic degradation of methyl orange indicates that the order of photocatalytic activity of the three oriented films is (100) > (111) > (110). Combined with analysis of electronic nature and band structure for LaCoO3 films, it is found that the change of the photocatalytic activity is closely related to the crystal field splitting energy of Co3+ and Co–O binding energy. The increase in the mean Co–O bond length will decrease the crystal field splitting energy of Co3+ and Co–O binding energy and further reduce the value of band gap energy, thus improving the photocatalytic activity. This may also provide a clue for expanding the visible-light-induced photocatalytic application of LaCoO3. PMID:29515854

  7. The Impact of Parental Reaction to Sexual Orientation on Depressive Symptoms and Sexual Risk Behavior Among Hispanic Men Who Have Sex with Men.

    PubMed

    Mitrani, Victoria B; De Santis, Joseph P; McCabe, Brian E; Deleon, Diego A; Gattamorta, Karina A; Leblanc, Natalie M

    2017-08-01

    This study examined the relationship of parent reaction to sexual orientation with depressive symptoms and safer sex among Hispanic adult men who have sex with men (MSM). We also examined men's acculturation to the U.S. (Americanism) in relation with these variables. Cross-sectional data collected from July 2011 to December 2012, from 125 MSM with a mean age of 43.02years. Instruments included the Perceived Parent Reaction Scale, the Centers for Epidemiological Studies Depression Scale, the Safer Sex Behavior Questionnaire and the Bidimensional Acculturation Scale. Data was analyzed using Hierarchical generalized linear models (GZLM). Among men whose parents knew of their sexual orientation, rejection of son's sexual orientation from mother (p=0.032) and from father (p=0.004) was related to higher number of depressive symptoms. Parent reactions were not directly related to safer sex behaviors. Americanism was associated with lower depressive symptoms (p=0.001) but was not related to safer sex behaviors. Current parent attitudes about their sons' sexual orientation had an effect on the sons' emotional wellbeing and acculturation may play a protective role. Mental health and primary care clinicians working with Hispanic MSM should assess for level of family support and provide resources to assist with disclosure and family acceptance of sexual orientation as indicated, particularly among recently immigrated men who may be at higher risk. Copyright © 2017 Elsevier Inc. All rights reserved.

  8. Health inequalities among adolescents: the impact of academic orientation and parents' education.

    PubMed

    Hagquist, Curt E I

    2007-02-01

    Traditionally, the socio-economic position of adolescents has been measured using information about parents' occupation, parents' level of education, or household income. Since the adolescence is a developmental stage characterised by a search for and a move into individual life tracks a shift of focus from socio-economic position of origin to socio-economic position of destination is justified. Academic orientation may be used as a rough indicator of future social position. The purpose of the study was to elucidate the link between academic orientation and parents' education on the one hand and subjective health and health-related behaviour among adolescents on the other. The study was based on cross-sectional questionnaire data collected in 1999 and 2003 among 1828 18-year-old students in year 2 of upper secondary school in a Swedish city. The data were analysed using contingency tables and logistic regression. Subjective health and health-related behaviour was strongly linked to academic orientation but not directly to parents' education. The pattern is unambiguous, poor health and health-damaging behaviour being significantly higher among students in non-theoretical programmes than among students in theoretical programmes. Academic orientation is a useful concept in order to detect health inequalities and a powerful way of identifying adolescents at higher risk. The unequal distribution of health and health-damaging behaviour according to academic orientation among adolescents turns out to be an important challenge for public health work.

  9. Orientation-dependent structural and photocatalytic properties of LaCoO3 epitaxial nano-thin films.

    PubMed

    Zhang, Yan-Ping; Liu, Hai-Feng; Hu, Hai-Long; Xie, Rui-Shi; Ma, Guo-Hua; Huo, Ji-Chuan; Wang, Hai-Bin

    2018-02-01

    LaCoO 3 epitaxial films were grown on (100), (110) and (111) oriented LaAlO 3 substrates by the polymer-assisted deposition method. Crystal structure measurement and cross-section observation indicate that all the LaCoO 3 films are epitaxially grown in accordance with the orientation of LaAlO 3 substrates, with biaxial compressive strain in the ab plane. Owing to the different strain directions of CoO 6 octahedron, the mean Co-O bond length increases by different amounts in (100), (110) and (111) oriented films compared with that of bulk LaCoO 3 , and the (100) oriented LaCoO 3 has the largest increase. Photocatalytic degradation of methyl orange indicates that the order of photocatalytic activity of the three oriented films is (100) > (111) > (110). Combined with analysis of electronic nature and band structure for LaCoO 3 films, it is found that the change of the photocatalytic activity is closely related to the crystal field splitting energy of Co 3+ and Co-O binding energy. The increase in the mean Co-O bond length will decrease the crystal field splitting energy of Co 3+ and Co-O binding energy and further reduce the value of band gap energy, thus improving the photocatalytic activity. This may also provide a clue for expanding the visible-light-induced photocatalytic application of LaCoO 3 .

  10. All-fiber 3D vector displacement (bending) sensor based on an eccentric FBG.

    PubMed

    Bao, Weijia; Rong, Qiangzhou; Chen, Fengyi; Qiao, Xueguang

    2018-04-02

    We demonstrate a fiber-optic 3D vector displacement sensor based on the monitoring of Bragg reflection from an eccentric grating inscribed in a depressed-cladding fiber using the femtosecond laser side-illumination and phase-mask technique. The compact sensing probe consists of a short section of depressed cladding fiber (DCF) containing eccentrically positioned fiber Bragg gratings. The eccentric grating breaks the cylindrical symmetry of the fiber cross-section and further has bending orientation-dependence. The generated fundamental resonance is strongly sensitive to bending of the fiber, and the direction of the bending plane can be determined from its responses. When integrated with axis strain monitoring, the sensor achieves a 3D vector displacement measurement via simple geometric analysis.

  11. Consistently Showing Your Best Side? Intra-individual Consistency in #Selfie Pose Orientation

    PubMed Central

    Lindell, Annukka K.

    2017-01-01

    Painted and photographic portraits of others show an asymmetric bias: people favor their left cheek. Both experimental and database studies confirm that the left cheek bias extends to selfies. To date all such selfie studies have been cross-sectional; whether individual selfie-takers tend to consistently favor the same pose orientation, or switch between multiple poses, remains to be determined. The present study thus examined intra-individual consistency in selfie pose orientations. Two hundred selfie-taking participants (100 male and 100 female) were identified by searching #selfie on Instagram. The most recent 10 single-subject selfies for the each of the participants were selected and coded for type of selfie (normal; mirror) and pose orientation (left, midline, right), resulting in a sample of 2000 selfies. Results indicated that selfie-takers do tend to consistently adopt a preferred pose orientation (α = 0.72), with more participants showing an overall left cheek bias (41%) than would be expected by chance (overall right cheek bias = 31.5%; overall midline bias = 19.5%; no overall bias = 8%). Logistic regression modellng, controlling for the repeated measure of participant identity, indicated that sex did not affect pose orientation. However, selfie type proved a significant predictor when comparing left and right cheek poses, with a stronger left cheek bias for mirror than normal selfies. Overall, these novel findings indicate that selfie-takers show intra-individual consistency in pose orientation, and in addition, replicate the previously reported left cheek bias for selfies and other types of portrait, confirming that the left cheek bias also presents within individuals’ selfie corpora. PMID:28270790

  12. Sexual Orientation Self-Concept Ambiguity: Scale Adaptation and Validation.

    PubMed

    Talley, Amelia E; Stevens, Jordan E

    2017-07-01

    The current article describes the adaptation of a measure of sexual orientation self-concept ambiguity (SSA) from an existing measure of general self-concept clarity. Latent "trait" scores of SSA reflect the extent to which a person's beliefs about their own sexual orientation are perceived as inconsistent, unreliable, or incongruent. Sexual minority and heterosexual women ( n = 348), ages 18 to 30, completed a cross-sectional survey. Categorical confirmatory factor analysis guided the selection of items to form a 10-item, self-report measure of SSA. In the current report, we also examine (a) reliability of the 10-item scale score, (b) measurement invariance based on respondents' sexual identity status and age group, and (c) correlations with preexisting surveys that purport to measure similar constructs and theoretical correlates. Evidence for internal reliability, measurement invariance (based on respondent sex), and convergent validity was also investigated in an independent, validation sample. The lowest SSA scores were reported by women who self-ascribed an exclusively heterosexual or exclusively lesbian/gay sexual identity, whereas those who reported a bisexual, mostly lesbian/gay, or mostly heterosexual identity, reported relatively higher SSA scores.

  13. Curvature-driven capillary migration and assembly of rod-like particles

    PubMed Central

    Cavallaro, Marcello; Botto, Lorenzo; Lewandowski, Eric P.; Wang, Marisa; Stebe, Kathleen J.

    2011-01-01

    Capillarity can be used to direct anisotropic colloidal particles to precise locations and to orient them by using interface curvature as an applied field. We show this in experiments in which the shape of the interface is molded by pinning to vertical pillars of different cross-sections. These interfaces present well-defined curvature fields that orient and steer particles along complex trajectories. Trajectories and orientations are predicted by a theoretical model in which capillary forces and torques are related to Gaussian curvature gradients and angular deviations from principal directions of curvature. Interface curvature diverges near sharp boundaries, similar to an electric field near a pointed conductor. We exploit this feature to induce migration and assembly at preferred locations, and to create complex structures. We also report a repulsive interaction, in which microparticles move away from planar bounding walls along curvature gradient contours. These phenomena should be widely useful in the directed assembly of micro- and nanoparticles with potential application in the fabrication of materials with tunable mechanical or electronic properties, in emulsion production, and in encapsulation. PMID:22184218

  14. Feasibility of a web-based suicide awareness programme for Asian American college students

    PubMed Central

    Choi, Heeseung; Park, Hanjong; Suarez, Marie L; Park, Chang; Zhao, Zhongsheng; Wilkie, Diana J

    2016-01-01

    Objective The Truth about Suicide video has been widely used but has never been empirically tested regarding its cultural appropriateness for Asian Americans. The purpose of the study was to determine the feasibility of using the video in a web-based suicide awareness programme for Asian American and non-Hispanic white college students. Methods A cross-sectional, comparative, web-based study was conducted with 227 Asian Americans and 204 non-Hispanic whites at a university in the Midwest region of the USA. Study participants completed a questionnaire measuring their cultural orientation and attitudes towards suicide, watched the 27 min video, completed a debriefing session and evaluated the video's overall suitability. Results Asian Americans rated the suicide awareness video significantly lower for cultural relevance than did non-Hispanic whites (F=5.479, p=0.02). Collectivist cultural orientation was a significant predictor for cultural relevance, credibility and appeal; however, evaluation of the video's cultural relevance was negatively affected by Asian ethnicity. Conclusions Cultural orientation and race/ethnicity should be strongly considered when web-based suicide awareness programmes are developed for college students. PMID:28003296

  15. The effects of paradigmatic orientations of education research and discourse

    NASA Astrophysics Data System (ADS)

    Smithson, John Lawrence

    This essay presents an examination of contemporary disputes over methodological and epistemological foundations underlying inquiry within the field of education research; investigating the obstacles to communication and understanding found in scholarly exchanges occurring across competing paradigmatic orientations. Terminological challenges to cross-paradigmatic communication are examined, identifying three specific terminological difficulties, referred to as homonym, contextual, and onti-stemic problems. Nicholas Burbules' model of dialogue, based upon characteristics of convergence, divergence, inclusive and critical traits, is adopted and applied to a sample of cross-paradigmatic exchanges found in recent educational research journals. Examination of those exchanges reveals certain strategies associated with cross-paradigmatic communication. These strategies, labeled as trivialization, caricaturization, and re-direction, are shown to be detrimental to the mutual understanding of the interlocutors. The model is then extended to address examples of paradigmatic orientations within methodological and epistemological contexts in order to consider the relationship between the various orientations represented in the literature of interest. Methodological and epistemological orientations are shown to be loosely coupled, with unexpected shifts in paradigmatic values found among researchers' methodological and epistemological commitments. Finally, the nature of the relationship between competing paradigmatic orientations is examined, with particular attention given to four types of incommensurability (ontological, linguistic, epistemological, and values incommensurability). I conclude that, though difficult, cross-paradigmatic communication is necessary in order to provide a multi-paradigmatic perspective that takes us beyond the fractured picture of educational phenomena available from current research approaches.

  16. Facing Off: Comparing an In-Person Library Orientation Lecture with an Asynchronous Online Library Orientation

    ERIC Educational Resources Information Center

    Gall, Dan

    2014-01-01

    A study to compare the effectiveness of an in-person library orientation with an online asynchronous orientation was conducted with three sections of Social Work Research Methods, a required course in the University of Iowa's Master of Social Work program. Two sections of the course received an online orientation involving short videos, text and…

  17. Role of higher-multipole deformations and noncoplanarity in the decay of the compound nucleus *220Th within the dynamical cluster-decay model

    NASA Astrophysics Data System (ADS)

    Hemdeep, Chopra, Sahila; Kaur, Arshdeep; Kaushal, Pooja; Gupta, Raj K.

    2018-04-01

    Background: The formation and decay of the *220Th compound nucleus (CN) formed via some entrance channels (16O+204Pb,40Ar+180Hf,48Ca+172Yb,82Se+138Ba ) at near barrier energies has been studied within the dynamical cluster-decay model (DCM) [Hemdeep et al. Phys. Rev. C 95, 014609 (2017), 10.1103/PhysRevC.95.044603], for quadrupole deformations (β2 i) and "optimum" orientations (θopt) of the two nuclei or decay fragments lying in the same plane (coplanar nuclei, Φ =0∘ ). Purpose: We aim to investigate the role of higher-multipole deformations, the octupole (β3 i) and hexadecupole (β4 i), and "compact" orientations (θc i) together with the noncoplanarity degree of freedom (Φc) in the noncompound nucleus (nCN) cross section, already observed in the above mentioned study with quadrupole deformations (β2 i) alone, the Φ =0∘ case. Methods: The dynamical cluster-decay model (DCM), based on the quantum mechanical fragmentation theory (QMFT), is used to analyze the decay channel cross sections σx n for various experimentally studied entrance channels. The parameter Ra (equivalently, the neck length Δ R in Ra=R1+R2+Δ R ), which fixes both the preformation and penetration paths, is used to best fit both unobserved (1 n ,2 n ) and observed (3 n -5 n ) decay channel cross sections, keeping the root-mean-square (r.m.s) deviation to the minimum, which allows us to predict the nCN effects, if any, and fusion-fission (ff) cross sections in various reactions at different CN excitation energies E*. Results: For the decay of CN *220Th, the mass fragmentation potential V (Ai ) and preformation yields P0( Ai ) show an asymmetric fission mass distribution, in agreement with one observed in experiments, independent of adding or not adding (β3 i,β4 i ), and irrespective of large changes (by 36° and 34°), respectively, in "compact" orientations θc i and noncoplanarity Φc, and also in the potential energy surface V (Ai ) in light mass (1 n -5 n ) decays. Whereas the 3 n - and 5 n -decay channels fit nearly exactly, i.e., they are always the pure CN decays, the 4 n -decay channel shows the presence of large (˜95 % ) nCN content whose magnitude in every case remains the same within <1 % and hence does not get modified, in contrast to our earlier studies of other CN. Also, the near constancy of best fitted Ra(≡Δ R ) with E*, and with an upper limiting value for reactions with magic nuclei as reaction partner(s), independent of the entrance channel nuclei, allows us to predict the decay channel cross sections σx n,x =3 -5 for 16O+204Pb reaction, whose sum (=∑35σx n ) fits the observed σER data nicely. Also, the variations of CN fusion/formation probability PC N and survival probability Psurv follow the required systematic behavior, giving credence to our DCM analysis. Conclusions: With the inclusion of higher-multipole deformations and "compact" noncoplanarity degree of freedom (Φc≠0 ), the results of our above-mentioned earlier study, using quadrupole deformation (β2 i) alone for coplanar (Φc=0 ) nuclei, remain the same; i.e., of the measured 3 n -5 n decay channels of CN *220Th, the 3 n and 5 n decays are always pure CN decays and the 4 n decay is mainly of nCN content σn CN, whose magnitude also remains constant (within <1 % ) under all approximations. Furthermore, the upper limiting value of the linear dependence of first turning point Ra on E* is shown to be a better choice for predicting the decay channel cross sections σx n for reactions like 16O+204Pb using magic nuclei, whose experimental determination will be a good test of our model.

  18. Oral impacts on quality of life and problem-oriented attendance among South East London adults.

    PubMed

    Gaewkhiew, Piyada; Bernabé, Eduardo; Gallagher, Jennifer E; Klass, Charlotte; Delgado-Angulo, Elsa K

    2017-04-26

    Dental care seeking behaviour is often driven by symptoms. The value of oral health related quality of life (OHRQoL) measures to predict utilisation of dental services is unknown. This study aims to explore the association between OHRQoL and problem-oriented dental attendance among adults. We analysed cross-sectional data for 705 adults, aged 16 years and above, living in three boroughs of Inner South East London. Data were collected during structured interviews at home. The short form of the Oral Health Impact Profile (OHIP-14) was used to assess the frequency of oral impacts on daily life in the last year. Problem-oriented attendance was defined based on time elapsed since last visit (last 6 months) and reason for that visit (trouble with teeth). The association between OHIP-14 (total and domain) scores and problem-oriented attendance was tested in logistic regression models adjusting for participants' sociodemographic characteristics. Problem-oriented attenders had a higher OHIP-14 total score than regular attenders (6.73 and 3.73, respectively). In regression models, there was a positive association between OHIP-14 total score and problem-oriented attendance. The odds of visiting the dentist for trouble with teeth were 1.07 greater (95% Confidence Interval: 1.04-1.10) per unit increase in the OHIP-14 total score, after adjustment for participants' sociodemographic characteristics. In subsequent analysis by OHIP-14 domains, greater scores in all domains but handicap were significantly associated with problem-oriented attendance. This study shows that oral impacts on quality of life are associated with recent problem-oriented dental attendance among London adults. Six of the seven domains in the OHIP-14 questionnaire were also associated with dental visits for trouble with teeth.

  19. Readability assessment of online tracheostomy care resources.

    PubMed

    Kong, Keonho Albert; Hu, Amanda

    2015-02-01

    To assess the readability of online tracheostomy care resources. Cross-sectional study. Academic center. A Google search was performed for "tracheostomy care" in January 2014. The top 50 results were categorized into major versus minor websites and patient-oriented versus professional-oriented resources. These websites were evaluated with the following readability tools: Flesch Reading Ease Score (FRES), Flesch-Kincaid Grade Level (FKGL), Simple Measure of Gobbledygook (SMOG), and Gunning Frequency of Gobbledygook (GFOG). Readability scores for the websites were FRES 57.21 ± 16.71 (possible range = 0-100), FKGL 8.33 ± 2.84 (possible range = 3-12), SMOG 11.25 ± 2.49 (possible range = 3-19), and GFOG 11.43 ± 4.07 (possible range = 3-19). There was no significant difference in all 4 readability scores between major (n = 41) and minor (n = 9) websites. Professional-oriented websites (n = 19) had the following readability scores: FRES 40.77 ± 11.69, FKGL 10.93 ± 2.48, SMOG 13.29 ± 2.32, and GFOG 14.91 ± 3.98. Patient-oriented websites (n = 31) had the following readability scores: FRES 67.29 ± 9.91, FKGL 6.73 ± 1.61, SMOG 10.01 ± 1.64, and GFOG 9.30 ± 2.27. Professional-oriented websites had more difficult readability scores than patient-oriented websites for FRES (P < .00), FKGL (P < .00), SMOG (P < .00), and GFOG (P < .00). Online tracheostomy care resources were written at a level more difficult than the recommended fourth- to sixth-grade level for written health information. There was no significant difference in readability between major and minor websites. Professional-oriented websites were more difficult to read than patient-oriented websites. © American Academy of Otolaryngology—Head and Neck Surgery Foundation 2014.

  20. Pharmaceutical orientation at hospital discharge of transplant patients: strategy for patient safety

    PubMed Central

    Lima, Lívia Falcão; Martins, Bruna Cristina Cardoso; de Oliveira, Francisco Roberto Pereira; Cavalcante, Rafaela Michele de Andrade; Magalhães, Vanessa Pinto; Firmino, Paulo Yuri Milen; Adriano, Liana Silveira; da Silva, Adriano Monteiro; Flor, Maria Jose Nascimento; Néri, Eugenie Desirée Rabelo

    2016-01-01

    ABSTRACT Objective: To describe and analyze the pharmaceutical orientation given at hospital discharge of transplant patients. Methods: This was a cross-sectional, descriptive and retrospective study that used records of orientation given by the clinical pharmacist in the inpatients unit of the Kidney and Liver Transplant Department, at Hospital Universitário Walter Cantídio, in the city of Fortaleza (CE), Brazil, from January to July, 2014. The following variables recorded at the Clinical Pharmacy Database were analyzed according to their significance and clinical outcomes: pharmaceutical orientation at hospital discharge, drug-related problems and negative outcomes associated with medication, and pharmaceutical interventions performed. Results: The first post-transplant hospital discharge involved the entire multidisciplinary team and the pharmacist was responsible for orienting about drug therapy. The mean hospital discharges/month with pharmaceutical orientation during the study period was 10.6±1.3, totaling 74 orientations. The prescribed drug therapy had a mean of 9.1±2.7 medications per patient. Fifty-nine drug-related problems were identified, in which 67.8% were related to non-prescription of medication needed, resulting in 89.8% of risk of negative outcomes associated with medications due to untreated health problems. The request for inclusion of drugs (66.1%) was the main intervention, and 49.2% of the medications had some action in the digestive tract or metabolism. All interventions were classified as appropriate, and 86.4% of them we able to prevent negative outcomes. Conclusion: Upon discharge of a transplanted patient, the orientation given by the clinical pharmacist together with the multidisciplinary team is important to avoid negative outcomes associated with drug therapy, assuring medication reconciliation and patient safety. PMID:27759824

  1. Arecibo Radar Observation of Near-Earth Asteroids: Expanded Sample Size, Determination of Radar Albedos, and Measurements of Polarization Ratios

    NASA Astrophysics Data System (ADS)

    Lejoly, Cassandra; Howell, Ellen S.; Taylor, Patrick A.; Springmann, Alessondra; Virkki, Anne; Nolan, Michael C.; Rivera-Valentin, Edgard G.; Benner, Lance A. M.; Brozovic, Marina; Giorgini, Jon D.

    2017-10-01

    The Near-Earth Asteroid (NEA) population ranges in size from a few meters to more than 10 kilometers. NEAs have a wide variety of taxonomic classes, surface features, and shapes, including spheroids, binary objects, contact binaries, elongated, as well as irregular bodies. Using the Arecibo Observatory planetary radar system, we have measured apparent rotation rate, radar reflectivity, apparent diameter, and radar albedos for over 350 NEAs. The radar albedo is defined as the radar cross-section divided by the geometric cross-section. If a shape model is available, the actual cross-section is known at the time of the observation. Otherwise we derive a geometric cross-section from a measured diameter. When radar imaging is available, the diameter was measured from the apparent range depth. However, when radar imaging was not available, we used the continuous wave (CW) bandwidth radar measurements in conjunction with the period of the object. The CW bandwidth provides apparent rotation rate, which, given an independent rotation measurement, such as from lightcurves, constrains the size of the object. We assumed an equatorial view unless we knew the pole orientation, which gives a lower limit on the diameter. The CW also provides the polarization ratio, which is the ratio of the SC and OC cross-sections.We confirm the trend found by Benner et al. (2008) that taxonomic types E and V have very high polarization ratios. We have obtained a larger sample and can analyze additional trends with spin, size, rotation rate, taxonomic class, polarization ratio, and radar albedo to interpret the origin of the NEAs and their dynamical processes. The distribution of radar albedo and polarization ratio at the smallest diameters (≤50 m) differs from the distribution of larger objects (>50 m), although the sample size is limited. Additionally, we find more moderate radar albedos for the smallest NEAs when compared to those with diameters 50-150 m. We will present additional trends we find in this data set.

  2. Software - Naval Oceanography Portal

    Science.gov Websites

    section Advanced Search... Sections Home Time Earth Orientation Astronomy Meteorology Oceanography Ice You are here: Home › USNO › Earth Orientation › Software USNO Logo USNO Navigation Earth Orientation Search databases Auxiliary Software Supporting Software Form Folder Earth Orientation Matrix Calculator

  3. Parametric analysis of synthetic aperture radar data acquired over truck garden vegetation

    NASA Technical Reports Server (NTRS)

    Wu, S. T.

    1984-01-01

    An airborne X-band SAR acquired multipolarization and multiflight pass SAR images over a truck garden vegetation area. Based on a variety of land cover and row crop direction variations, the vertical (VV) polarization data contain the highest contrast, while cross polarization contains the least. When the radar flight path is parallel to the row direction, both horizontal (HH) and VV polarization data contain very high return which masks out the specific land cover that forms the row structure. Cross polarization data are not that sensitive to row orientation. The inclusion of like and cross polarization data help delineate special surface features (e.g., row crop against non-row-oriented land cover, very-rough-surface against highly row-oriented surface).

  4. Atomic structure and stoichiometry of In(Ga)As/GaAs quantum dots grown on an exact-oriented GaP/Si(001) substrate

    NASA Astrophysics Data System (ADS)

    Schulze, C. S.; Huang, X.; Prohl, C.; Füllert, V.; Rybank, S.; Maddox, S. J.; March, S. D.; Bank, S. R.; Lee, M. L.; Lenz, A.

    2016-04-01

    The atomic structure and stoichiometry of InAs/InGaAs quantum-dot-in-a-well structures grown on exactly oriented GaP/Si(001) are revealed by cross-sectional scanning tunneling microscopy. An averaged lateral size of 20 nm, heights up to 8 nm, and an In concentration of up to 100% are determined, being quite similar compared with the well-known quantum dots grown on GaAs substrates. Photoluminescence spectra taken from nanostructures of side-by-side grown samples on GaP/Si(001) and GaAs(001) show slightly blue shifted ground-state emission wavelength for growth on GaP/Si(001) with an even higher peak intensity compared with those on GaAs(001). This demonstrates the high potential of GaP/Si(001) templates for integration of III-V optoelectronic components into silicon-based technology.

  5. Growth, characterization and device development in monocrystalline diamond films

    NASA Astrophysics Data System (ADS)

    Davis, R. F.; Glass, J. T.; Nemanich, R. J.; Bozeman, S. P.; Sowers, A. T.

    1995-06-01

    Experimental and theoretical studies concerned with interface interactions of diamond with Si, Ni, and Ni3Si substrates have been conducted. Oriented diamond films deposited on (100) Si were characterized by polar Raman, polar x-ray diffraction (XRD), and cross-sectional high resolution transmission electron microscopy (HRTEM). These sutides showed that the diamond(100)/Si(100) interface adopted the 3:2-match arrangement rather than a 45 deg rotation. Extended Hueckel tight-binding (EHTB) electronic structure calculations for a model system revealed that the interface interaction favors the 3:2-match arrangement. Growth on polycrystalline Ni3Si resulted in oriented diamond particles; under the same growth conditions, graphite was formed on the nickel substrate. Our EHTB electronic structure calculations showed that the (111) and (100) surfaces of Ni3Si have a strong preference for diamond nucleation over graphite nucleation, but this was not the case for the (111) and (100) surfaces of Ni.

  6. Comparison of thermal insulation performance of fibrous materials for the advanced space suit.

    PubMed

    Paul, Heather L; Diller, Kenneth R

    2003-10-01

    The current multi-layer insulation used in the extravehicular mobility unit (EMU) will not be effective in the atmosphere of Mars due to the presence of interstitial gases. Alternative thermal insulation means have been subjected to preliminary evaluation by NASA to attempt to identify a material that will meet the target conductivity of 0.005 W/m-K. This study analyzes numerically the thermal conductivity performance for three of these candidate insulating fiber materials in terms of various denier (size), interstitial void fractions, interstitial void media, and orientations to the applied temperature gradient to evaluate their applicability for the new Mars suit insulation. The results demonstrate that the best conductive insulation is achieved for a high-void-fraction configuration with a grooved fiber cross section, aerogel void medium, and the fibers oriented normal to the heat flux vector. However, this configuration still exceeds the target thermal conductivity by a factor of 1.5.

  7. Modified retrieval algorithm for three types of precipitation distribution using x-band synthetic aperture radar

    NASA Astrophysics Data System (ADS)

    Xie, Yanan; Zhou, Mingliang; Pan, Dengke

    2017-10-01

    The forward-scattering model is introduced to describe the response of normalized radar cross section (NRCS) of precipitation with synthetic aperture radar (SAR). Since the distribution of near-surface rainfall is related to the rate of near-surface rainfall and horizontal distribution factor, a retrieval algorithm called modified regression empirical and model-oriented statistical (M-M) based on the volterra integration theory is proposed. Compared with the model-oriented statistical and volterra integration (MOSVI) algorithm, the biggest difference is that the M-M algorithm is based on the modified regression empirical algorithm rather than the linear regression formula to retrieve the value of near-surface rainfall rate. Half of the empirical parameters are reduced in the weighted integral work and a smaller average relative error is received while the rainfall rate is less than 100 mm/h. Therefore, the algorithm proposed in this paper can obtain high-precision rainfall information.

  8. A new aeroelastic model for composite rotor blades with straight and swept tips

    NASA Technical Reports Server (NTRS)

    Yuan, Kuo-An; Friedmann, Peretz P.; Venkatesan, Comandur

    1992-01-01

    An analytical model for predicting the aeroelastic behavior of composite rotor blades with straight and swept tips is presented. The blade is modeled by beam type finite elements along the elastic axis. A single finite element is used to model the swept tip. The nonlinear equations of motion for the finite element model are derived using Hamilton's principle and based on a moderate deflection theory and accounts for: arbitrary cross-sectional shape, pretwist, generally anisotropic material behavior, transverse shears and out-of-plane warping. Numerical results illustrating the effects of tip sweep, anhedral and composite ply orientation on blade aeroelastic behavior are presented. Tip sweep can induce aeroelastic instability by flap-twist coupling. Tip anhedral causes lag-torsion and flap-axial couplings, however, its effects on blade stability is less pronounced than the effect due to sweep. Composite ply orientation has a substantial effect on blade stability.

  9. Social support contributes to resilience among physiotherapy students: a cross sectional survey and focus group study.

    PubMed

    Bíró, Éva; Veres-Balajti, Ilona; Kósa, Karolina

    2016-06-01

    The present study, taking a resource-oriented approach to mental health, aimed at investigating mental resilience and its determinants among undergraduate physiotherapy students using quantitative and qualitative tools. A questionnaire-based cross-sectional survey supplemented by 2 focus groups. One university in Hungary. 130 physiotherapy students at years 1, 2, and 3. Sense of coherence, a measure of dynamic self-esteem, as well as social support from family and peers were used to assess mental well-being. A screening instrument for psychological morbidity and perceived stress were used as deficiency-oriented approaches. Student opinions were gathered on positive and negative determinants of mental health. Resilience was lower [mean difference 4.8 (95% CI -3.4; 13.1)], and the occurrence of psychological morbidity (32.5% vs. 0%) was higher among female compared to male students. However, the proportion of students fully supported by their peers was higher among females (63% vs. 37.5%). Female students, unlike their male counterparts, experienced higher stress compared to their peers in the general population. Social support declined as students progressed in their studies though this proved to be the most important protective factor for their mental well-being. Results were fed back to the course organizers recommending the implementation of an evidence-based method to improve social support as delineated by the Guide to Community Preventive Services of the US the outcomes of which are to be seen in the future. Copyright © 2015 Chartered Society of Physiotherapy. Published by Elsevier Ltd. All rights reserved.

  10. Immediate effects of an artificial change in hoof angulation on the dorsal metacarpophalangeal joint angle and cross-sectional areas of both flexor tendons.

    PubMed

    Hagen, Jenny; Kojah, Kaid; Geiger, Michael; Vogel, Mandy

    2018-06-16

    Corrective shoeing is used to change hoof angulation with the intention to influence the angulation of the digital joints to reduce strain on associated tendons. The objective of this study is to examine how gradual changes in hoof angulation affect the dorsal metacarpophalangeal joint (DMPJ) angulation and cross-sectional areas (CSAs) of the deep digital flexor tendon (DDFT) and superficial digital flexor tendon (SDFT) concerning the individual toe conformation. Forelimbs of 30 horses were examined barefoot and equipped with 5°, 10° and 20° toe wedges (TWs) and heel wedges (HWs). Phalangeal angulation and lengths were measured in lateromedial radiographs of the digit. CSAs of both flexor tendons was calculated in sonographic images. Significant effects on the DMPJ and CSA of the DDFT/SDFT were measured with 10° and 20° HWs or 20° TWs. Both flexor tendons showed increasing CSA after heel elevation. Significant interindividual variations occurred. Phalangeal angulation and length influenced the responsivity of the parameters to a changed hoof angulation. Significant impact of corrective shoeing on the DMPJ and flexor tendons is related to a distinct change in hoof orientation and varies with individual toe conformation. Similar response of the DDFT and SDFT to raised and lowered hoof orientation needs further investigation for a more specific application of therapeutic shoeing. © British Veterinary Association (unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

  11. Automatic evaluation of the Valsalva sinuses from cine-MRI

    NASA Astrophysics Data System (ADS)

    Blanchard, Cédric; Sliwa, Tadeusz; Lalande, Alain; Mohan, Pauliah; Bouchot, Olivier; Voisin, Yvon

    2011-03-01

    MRI appears to be particularly attractive for the study of the Sinuses of Valsalva (SV), however there is no global consensus on their suitable measurements. In this paper, we propose a new method, based on the mathematical morphology and combining a numerical geodesic reconstruction with an area estimation, to automatically evaluate the SV from a cine-MRI in a cross-sectional orientation. It consists in the extraction of the shape of the SV, the detection of relevant points (commissures, cusps and the centre of the SV), the measurement of relevant distances and in a classification of the valve as bicuspid or tricuspid by a metric evaluation of the SV. Our method was tested on 23 patient examinations and radii calculations were compared with a manual measurement. The classification of the valve as tricuspid or bicuspid was correct for all the cases. Moreover, there are an excellent correlation and an excellent concordance between manual and automatic measurements for images at diastolic phase (r= 0.97; y = x - 0.02; p=NS; mean of differences = -0.1 mm; standard deviation of differences = 2.3 mm) and at systolic phase (r= 0.96; y = 0.97 x + 0.80; p=NS ; mean of differences = -0.1 mm; standard deviation of differences = 2.4 mm). The cross-sectional orientation of the image acquisition plane conjugated with our automatic method provides a reliable morphometric evaluation of the SV, based on the automatic location of the centre of the SV, the commissure and the cusp positions. Measurements of distances between relevant points allow a precise evaluation of the SV.

  12. The mechanism of transforming diamond nanowires to carbon nanostructures

    NASA Astrophysics Data System (ADS)

    Sorkin, Anastassia; Su, Haibin

    2014-01-01

    The transformation of diamond nanowires (DNWs) with different diameters and geometries upon heating is investigated with density-functional-based tight-binding molecular dynamics. DNWs of <100> and <111> oriented cross-section with projected average line density between 7 and 20 atoms Å-1 transform into carbon nanotubes (CNTs) under gradual heating up to 3500-4000 K. DNWs with projected average line density larger than 25 atoms Å-1 transform into double-wall CNTs. The route of transformation into CNTs clearly exhibits three stages, with the intriguing intermediate structural motif of a carbon nanoscroll (CNS). Moreover, the morphology plays an important role in the transformation involving the CNS as one important intermediate motif to form CNTs. When starting with \\langle \\bar {2}1 1\\rangle oriented DNWs with a square cross-section consisting of two {111} facets facing each other, one interesting structure with ‘nano-bookshelf’ shape emerges: a number of graphene ‘shelves’ located inside the CNT, bonding to the CNT walls with sp3 hybridized atoms. The nano-bookshelf structures exist in a wide range of temperatures up to 3000 K. The further transformation from nano-bookshelf structures depends on the strength of the joints connecting shelves with CNT walls. Notably, the nano-bookshelf structure can evolve into two end products: one is CNT via the CNS pathway, the other is graphene transformed directly from the nano-bookshelf structure at high temperature. This work sheds light on the microscopic insight of carbon nanostructure formation mechanisms with the featured motifs highlighted in the pathways.

  13. Systematic analysis of hot Yb* isotopes using the energy density formalism

    NASA Astrophysics Data System (ADS)

    Jain, Deepika; Sharma, Manoj K.; Rajni; Kumar, Raj; Gupta, Raj K.

    2014-10-01

    A systematic study of the spin-orbit density interaction potential is carried out, with spherical as well as deformed choices of nuclei, for a variety of near-symmetric and asymmetric colliding nuclei leading to various isotopes of the compound nucleus Yb*, using the semiclassical extended Thomas-Fermi formulation (ETF) of the Skyrme energy density formalism (SEDF). We observe that the spin-orbit density interaction barrier height ( and barrier position ( increase systematically with the increase in number of neutrons in both the projectile and target, for spherical systems. On allowing deformation effects with optimum orientations, the barrier-height increases by a large order of magnitude, as compared to the spherical case, in going from 156Yb* to 172Yb* nuclear systems formed via near-symmetric Ni+Mo or asymmetric O+Sm colliding nuclei, except that for the oblate-shaped nuclei, the is the highest and shifts towards a smaller (compact) interaction radius. The temperature does not change the behavior of spin-orbit density dependent ( and independent ( interaction potentials, except for some minor changes in the magnitude. The orientation degree of freedom also plays an important role in modifying the barrier characteristics and hence produces a large effect on the fusion cross section. The fusion excitation function of the compound nuclei 160, 164Yb* formed in different incoming channels, show clearly that the new forces GSkI and KDE0v1 respond better than the old SIII force. Among the first two, KDE0v1 seems to perform better. The fusion cross-sections are also predicted for a few other isotopes of Yb*.

  14. Dynamics of Db isotopes formed in reactions induced by 238U, 248Cm, and 249Bk across the Coulomb barrier

    NASA Astrophysics Data System (ADS)

    Kaur, Gurjit; Sandhu, Kirandeep; Kaur, Amandeep; Sharma, Manoj K.

    2018-05-01

    The dynamical cluster decay model is employed to investigate the decay of *265Db and *267Db nuclei, formed in the 27Al+238U , 18O+249Bk , and 19F+248Cm hot fusion reactions at energies around the Coulomb barrier. First, the fission dynamics of the 27Al+238U reaction is explored by investigating the fragmentation and preformation yield of the reaction. The symmetric mass distribution of the fission fragments is observed for *265Db nucleus, when static β2 i deformations are used within hot optimum orientation approach. However, the mass split gets broaden for the use of β2 i-dynamical hot configuration of the fragments and becomes clearly asymmetric for the cold-static-deformed approach. Within the application of cold orientations of fragments, a new fission channel is observed at mass asymmetry η =0.29 . In addition to 238U-induced reaction, the work is carried out to address the fission and neutron evaporation cross sections of *267Db nucleus formed via 19F+248Cm and 18O+249Bk reactions, besides a comprehensive analysis of fusion and capture processes. Higher fusion cross sections and compound nucleus formation probabilities (PCN) are obtained for the 18O+249Bk reaction, as larger mass asymmetry in the entrance channel leads to reduced Coulomb factor. Finally, the role of sticking (IS) and nonsticking (INS) moments of inertia is analyzed for the 4 n and 5 n channels of *267Db nuclear system.

  15. A Ballistic Material Model for Cross-Plied Unidirectional Ultra-High Molecular-Weight Polyethylene Fiber-Reinforced Armor-Grade Composites

    DTIC Science & Technology

    2008-01-01

    strength polymeric fibers such as aramid (e.g. Kevlar ®, Twaron®, etc.) or oriented polyethy- lene fibers (e.g. Spectra®, Dyneema®, etc.) with an... phenolic -poly-vinyl-butyral resin and on 0◦/90◦ cross- plied oriented polyethylene fiber-reinforced vinyl-ester resin are widely used in hard personnel...are: (a) poly-aramids (e.g. Kevlar ®, Twaron®, Technora®); (b) highly oriented ultra-highmolecular-weight polyethylene, UHMWPE (e.g. Spectra®, Dyneema

  16. LIMAO: Cross-platform software for simulating laser-induced alignment and orientation dynamics of linear-, symmetric- and asymmetric tops

    NASA Astrophysics Data System (ADS)

    Szidarovszky, Tamás; Jono, Maho; Yamanouchi, Kaoru

    2018-07-01

    A user-friendly and cross-platform software called Laser-Induced Molecular Alignment and Orientation simulator (LIMAO) has been developed. The program can be used to simulate within the rigid rotor approximation the rotational dynamics of gas phase molecules induced by linearly polarized intense laser fields at a given temperature. The software is implemented in the Java and Mathematica programming languages. The primary aim of LIMAO is to aid experimental scientists in predicting and analyzing experimental data representing laser-induced spatial alignment and orientation of molecules.

  17. Model Driven Development of Web Services and Dynamic Web Services Composition

    DTIC Science & Technology

    2005-01-01

    27 2.4.1 Feature-Oriented Domain Analysis ( FODA ).......................................27 2.4.2 The need of automation for Feature-Oriented...Diagram Algebra FDL Feature Description Language FODA Feature-Oriented Domain Analysis FSM Finite State Machine GDM Generative Domain...Oriented Domain Analysis ( FODA ) in Section 2.4 and Aspect-Oriented Generative Do- main Modeling (AOGDM) in Section 2.5, which not only represent two

  18. Sexual orientation identity and tobacco and hazardous alcohol use: findings from a cross-sectional English population survey

    PubMed Central

    Shahab, Lion; Brown, Jamie; Hagger-Johnson, Gareth; Michie, Susan; Semlyen, Joanna; West, Robert; Meads, Catherine

    2017-01-01

    Objectives To assess the association between tobacco and hazardous alcohol use and sexual orientation and whether such an association could be explained by other sociodemographic characteristics. Design Cross-sectional household survey conducted in 2014–2016. Setting England, UK. Participants Representative English population sample (pooled n=43 866). Main outcomes Sexual orientation identity (lesbian/gay, bisexual, heterosexual, prefer-not-to-say); current tobacco and hazardous alcohol use (defined as Alcohol Use Disorders Identification Test Score ≥8). All outcomes were self-reported. Results Due to interactions between sexual orientation and gender for substance use, analyses were stratified by gender. Tobacco use prevalence was significantly higher among lesbian/gay (women: 24.9%, 95% CI 19.2% to 32.6%; men: 25.9%, 95% CI 21.3% to 31.0%) and bisexual participants (women: 32.4%, 95% CI 25.9% to 39.6%; men: 30.7%, 95% CI 23.7% to 30.7%) and significantly lower for prefer-not-to-say participants in women (15.5%, 95% CI 13.5% to 17.8%) but not men (22.7%, 95% CI 20.3% to 25.3%) compared with heterosexual participants (women: 17.5%, 95% CI 17.0% to 18.0%; men: 20.4%, 95% CI 19.9% to 21.0%; p<0.001 for omnibus test). Similarly, hazardous alcohol use was significantly more prevalent for lesbian/gay (women: 19.0%, 95% CI 14.0% to 25.3%; men: 30.0%, 25.2%–35.3%) and bisexual participants (women: 24.4%, 95% CI 18.7% to 31.3%; men: 24.3%, 95% CI 17.9% to 32.1%) and lower for prefer-not-to-say participants (women: 4.1%, 95% CI 3.0% to 5.4%; men: 13.7%; 95% CI 11.8% to 16.0%) compared with heterosexuals (women: 8.3%, 95% CI 7.9% to 8.7%; men: 18.4%, 95% CI 17.9% to 18.9%; p<0.001 for omnibus test). However, after adjusting for sociodemographic confounders, tobacco use was similar across all sexual orientation groups among both women and men. By contrast, sexual orientation differences in hazardous alcohol use remained even after adjustment among women but not for bisexual and gay men. Conclusions In England, higher rates of tobacco use among sexual minority men and women appear to be attributable to other sociodemographic factors. Higher rates of hazardous alcohol use among sexual minority men may also be attributable to these factors, whereas this is not the case for sexual minority women. PMID:29074508

  19. Sexual orientation identity and tobacco and hazardous alcohol use: findings from a cross-sectional English population survey.

    PubMed

    Shahab, Lion; Brown, Jamie; Hagger-Johnson, Gareth; Michie, Susan; Semlyen, Joanna; West, Robert; Meads, Catherine

    2017-10-25

    To assess the association between tobacco and hazardous alcohol use and sexual orientation and whether such an association could be explained by other sociodemographic characteristics. Cross-sectional household survey conducted in 2014-2016. England, UK. Representative English population sample (pooled n=43 866). Sexual orientation identity (lesbian/gay, bisexual, heterosexual, prefer-not-to-say); current tobacco and hazardous alcohol use (defined as Alcohol Use Disorders Identification Test Score ≥8). All outcomes were self-reported. Due to interactions between sexual orientation and gender for substance use, analyses were stratified by gender. Tobacco use prevalence was significantly higher among lesbian/gay (women: 24.9%, 95% CI 19.2% to 32.6%; men: 25.9%, 95% CI 21.3% to 31.0%) and bisexual participants (women: 32.4%, 95% CI 25.9% to 39.6%; men: 30.7%, 95% CI 23.7% to 30.7%) and significantly lower for prefer-not-to-say participants in women (15.5%, 95% CI 13.5% to 17.8%) but not men (22.7%, 95% CI 20.3% to 25.3%) compared with heterosexual participants (women: 17.5%, 95% CI 17.0% to 18.0%; men: 20.4%, 95% CI 19.9% to 21.0%; p<0.001 for omnibus test). Similarly, hazardous alcohol use was significantly more prevalent for lesbian/gay (women: 19.0%, 95% CI 14.0% to 25.3%; men: 30.0%, 25.2%-35.3%) and bisexual participants (women: 24.4%, 95% CI 18.7% to 31.3%; men: 24.3%, 95% CI 17.9% to 32.1%) and lower for prefer-not-to-say participants (women: 4.1%, 95% CI 3.0% to 5.4%; men: 13.7%; 95% CI 11.8% to 16.0%) compared with heterosexuals (women: 8.3%, 95% CI 7.9% to 8.7%; men: 18.4%, 95% CI 17.9% to 18.9%; p<0.001 for omnibus test). However, after adjusting for sociodemographic confounders, tobacco use was similar across all sexual orientation groups among both women and men. By contrast, sexual orientation differences in hazardous alcohol use remained even after adjustment among women but not for bisexual and gay men. In England, higher rates of tobacco use among sexual minority men and women appear to be attributable to other sociodemographic factors. Higher rates of hazardous alcohol use among sexual minority men may also be attributable to these factors, whereas this is not the case for sexual minority women. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

  20. Cross-polarised and parallel-polarised light: Viewing and photography for examination and documentation of biological materials in medicine and forensics.

    PubMed

    Hanlon, Katharine L

    2018-01-01

    Cross-polarisation, with regard to visible light, is a process wherein two polarisers with perpendicular orientation to one another are used on the incident and reflected lights. Under cross-polarised light birefringent structures which are otherwise invisible become apparent. Cross-polarised light eliminates glare and specular highlights, allowing for an unobstructed view of subsurface pathology. Parallel-polarisation occurs when the polarisers are rotated to the same orientation. When cross- or parallel-polarisation is applied to photography, images can be generated which aid in visualisation of surface and subsurface elements. Improved access to equipment and education has the potential to benefit practitioners, researchers, investigators and patients.

  1. Acculturation, collectivist orientation and organisational commitment among Asian nurses working in the US healthcare system.

    PubMed

    Liou, Shwu-Ru; Tsai, Hsiu-Min; Cheng, Ching-Yu

    2013-05-01

    To examine the relationships between acculturation, collectivist orientation and organisational commitment among Asian nurses in US hospitals. Few studies have explored these three variables together in the same study and examined their statuses and mutual relationship among Asian nurses in Western hospitals. The study was a cross-sectional design using snowball sampling. A total of 195 Asian nurses participated. The collectivist orientation scale, organisational commitment questionnaire and acculturation factors were used to collect data. Pearson correlation, anova and regression were used to analyse the data. Most participants were female Filipinos with a mean age of 39.92 and a bachelor's degree and stayed in the USA for 13.35 years. They used and preferred to use both their mother language and English, identified themselves as Oriental or Asian and culturally, viewed themselves as very or mostly Asian. Participants scored high on collectivism and commitment. Collectivism was significantly correlated with commitment but did not mediate acculturation factors and commitment. To increase Asian nurses' commitment, it is important that administrators understand their cultural values and provide them with a cultural competent and sensitive environment. Healthcare administrators can increase Asian nurses' commitment through understanding their needs and attitudes toward their job and organisation. © 2012 Blackwell Publishing Ltd.

  2. The relationship between an orientation to the future and an orientation to the past: The role of future clarity.

    PubMed

    Moss, Simon A; Wilson, Samuel G; Irons, Melanie; Naivalu, Carmen

    2017-12-01

    Some research shows that people who often contemplate their future tend to be healthier. Yet the burgeoning literature on mindfulness demonstrates that people who are more attuned to their immediate experiences also enjoy many benefits. To reconcile these principles, many scholars recommend that people should distribute their attention, somewhat evenly, across the past, present, and future-but have not clarified how people should achieve this goal. We test the possibility that people who perceive their future as vivid and certain, called future clarity, might be able to both orient their attention to the future as well as experience mindfulness. Specifically, future clarity could diminish the inclination of people to reach decisions prematurely and dismiss information that contradicts these decisions, called need for closure-tendencies that diminish consideration of future consequences and mindfulness, respectively. In this cross-sectional study, 194 participants completed measures of mindfulness, consideration of future consequences, need for closure, and future clarity. Consistent with hypotheses, future clarity was positively associated with both mindfulness and consideration of future consequences. Need for closure partly mediated these relationships. Accordingly, interventions that empower people to shape and to clarify their future might generate the benefits of both mindfulness and a future orientation. Copyright © 2017 John Wiley & Sons, Ltd.

  3. Cellulose microfibril orientation of Picea abies and its variability at the micron-level determined by Raman imaging.

    PubMed

    Gierlinger, Notburga; Luss, Saskia; König, Christian; Konnerth, Johannes; Eder, Michaela; Fratzl, Peter

    2010-01-01

    The functional characteristics of plant cell walls depend on the composition of the cell wall polymers, as well as on their highly ordered architecture at scales from a few nanometres to several microns. Raman spectra of wood acquired with linear polarized laser light include information about polymer composition as well as the alignment of cellulose microfibrils with respect to the fibre axis (microfibril angle). By changing the laser polarization direction in 3 degrees steps, the dependency between cellulose and laser orientation direction was investigated. Orientation-dependent changes of band height ratios and spectra were described by quadratic linear regression and partial least square regressions, respectively. Using the models and regressions with high coefficients of determination (R(2) > 0.99) microfibril orientation was predicted in the S1 and S2 layers distinguished by the Raman imaging approach in cross-sections of spruce normal, opposite, and compression wood. The determined microfibril angle (MFA) in the different S2 layers ranged from 0 degrees to 49.9 degrees and was in coincidence with X-ray diffraction determination. With the prerequisite of geometric sample and laser alignment, exact MFA prediction can complete the picture of the chemical cell wall design gained by the Raman imaging approach at the micron level in all plant tissues.

  4. Simulation of orientational coherent effects via Geant4

    NASA Astrophysics Data System (ADS)

    Bagli, E.; Asai, M.; Brandt, D.; Dotti, A.; Guidi, V.; Verderi, M.; Wright, D.

    2017-10-01

    Simulation of orientational coherent effects via Geant4 beam manipulation of high-and very-high-energy particle beams is a hot topic in accelerator physics. Coherent effects of ultra-relativistic particles in bent crystals allow the steering of particle trajectories thanks to the strong electrical field generated between atomic planes. Recently, a collimation experiment with bent crystals was carried out at the CERN-LHC, paving the way to the usage of such technology in current and future accelerators. Geant4 is a widely used object-oriented tool-kit for the Monte Carlo simulation of the interaction of particles with matter in high-energy physics. Moreover, its areas of application include also nuclear and accelerator physics, as well as studies in medical and space science. We present the first Geant4 extension for the simulation of orientational effects in straight and bent crystals for high energy charged particles. The model allows the manipulation of particle trajectories by means of straight and bent crystals and the scaling of the cross sections of hadronic and electromagnetic processes for channeled particles. Based on such a model, an extension of the Geant4 toolkit has been developed. The code and the model have been validated by comparison with published experimental data regarding the deflection efficiency via channeling and the variation of the rate of inelastic nuclear interactions.

  5. Detection of preferential particle orientation in the atmosphere. Development of an alternative polarization lidar system

    DOE PAGES

    Geier, Manfred; Arienti, Marco

    2014-07-19

    Increasing interest in polarimetric characterization of atmospheric aerosols has led to the development of complete sample-measuring (Mueller) polarimeters that are capable of measuring the entire backscattering phase matrix of a probed volume. The Mueller polarimeters consist of several moving parts, which limit measurement rates and complicate data analysis. In this paper, we present the concept of a less complex polarization lidar setup for detection of preferential orientation of atmospheric particulates. On the basis of theoretical considerations of data inversion stability and propagation of measurement uncertainties, an optimum optical configuration is established for two modes of operation (with either a linearmore » or a circular polarized incident laser beam). We discovered that the conceptualized setup falls in the category of incomplete sample-measuring polarimeters and uses four detection channels for simultaneous measurement of the backscattered light. Likewise, the expected performance characteristics are discussed through an example of a typical aerosol with a small fraction of particles oriented in a preferred direction. As a result, the theoretical analysis suggests that achievable accuracies in backscatter cross-sections and depolarization ratios are similar to those with conventional two-channel configurations, while in addition preferential orientation can be detected with the proposed four-channel system for a wide range of conditions.« less

  6. Earth Orientation - Naval Oceanography Portal

    Science.gov Websites

    section Advanced Search... Sections Home Time Earth Orientation Astronomy Meteorology Oceanography Ice You are here: Home › USNO › Earth Orientation USNO Logo USNO Navigation Earth Orientation Products GPS -based Products VLBI-based Products EO Information Center Publications about Products Software Info Earth

  7. Current-induced domain wall motion in permalloy nanowires with a rectangular cross-section

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Ai, J. H.; Miao, B. F.; Sun, L.

    2011-11-01

    We performed micromagnetic simulations of the current-induced domain wall motion in permalloy nanowires with rectangular cross-section. In the absence of the nonadiabatic spin-transfer term, a threshold current, J{sub c} is required to drive the domain wall moving continuously. We find that J{sub c} is proportional to the maximum cross product of the demagnetization field and magnetization orientation of the domain wall and the domain wall width. With varying both the wire thickness and width, a minimum threshold current in the order of 10{sup 6} A/cm{sup 2} is obtained when the thickness is equivalent to the wire width. With the nonadiabaticmore » spin-transfer term, the calculated domain wall velocity {nu} equals to the adiabatic spin transfer velocity u when the current is far above the Walker limit J{sub w}. Below J{sub w}, {nu}=({beta}/{alpha})u, where {beta} is the nonadiabatic parameter and {alpha} is the damping factor. For different {beta}, we find the Walker limit can be scaled as J{sub w}=({alpha}/{beta}-{alpha})J{sub c}. Our simulations agree well with the one dimensional analytical calculation, suggesting the findings are the general behaviors of the systems in this particular geometry.« less

  8. Multiscale field-aligned current analyzer

    NASA Astrophysics Data System (ADS)

    Bunescu, C.; Marghitu, O.; Constantinescu, D.; Narita, Y.; Vogt, J.; Blǎgǎu, A.

    2015-11-01

    The magnetosphere-ionosphere coupling is achieved, essentially, by a superposition of quasi-stationary and time-dependent field-aligned currents (FACs), over a broad range of spatial and temporal scales. The planarity of the FAC structures observed by satellite data and the orientation of the planar FAC sheets can be investigated by the well-established minimum variance analysis (MVA) of the magnetic perturbation. However, such investigations are often constrained to a predefined time window, i.e., to a specific scale of the FAC. The multiscale field-aligned current analyzer, introduced here, relies on performing MVA continuously and over a range of scales by varying the width of the analyzing window, appropriate for the complexity of the magnetic field signatures above the auroral oval. The proposed technique provides multiscale information on the planarity and orientation of the observed FACs. A new approach, based on the derivative of the largest eigenvalue of the magnetic variance matrix with respect to the length of the analysis window, makes possible the inference of the current structures' location (center) and scale (thickness). The capabilities of the FAC analyzer are explored analytically for the magnetic field profile of the Harris sheet and tested on synthetic FAC structures with uniform current density and infinite or finite geometry in the cross-section plane of the FAC. The method is illustrated with data observed by the Cluster spacecraft on crossing the nightside auroral region, and the results are cross checked with the optical observations from the Time History of Events and Macroscale Interactions during Substorms ground network.

  9. Helicity-dependent cross sections and double-polarization observable E in η photoproduction from quasifree protons and neutrons

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Witthauer, L.; Dieterle, M.; Abt, S.

    2017-05-01

    Precise helicity-dependent cross sections and the double-polarization observable E were measured for η photoproduction from quasifree protons and neutrons bound in the deuteron. The η → 2γ and η → 3π 0 → 6γ decay modes were used to optimize the statistical quality of the data and to estimate systematic uncertainties. The measurement used the A2 detector setup at the tagged photon beam of the electron accelerator MAMI in Mainz. A longitudinally polarized deuterated butanol target was used in combination with a circularly polarized photon beam from bremsstrahlung of a longitudinally polarized electron beam. The reaction products were detected withmore » the electromagnetic calorimeters Crystal Ball and TAPS, which covered 98% of the full solid angle. The results show that the narrow structure observed earlier in the unpolarized excitation function of η photoproduction off the neutron appears only in reactions with antiparallel photon and nucleon spin (σ 1/2). It is absent for reactions with parallel spin orientation (σ 3/2) and thus very probably related to partial waves with total spin 1/2. The behavior of the angular distributions of the helicity-dependent cross sections was analyzed by fitting them with Legendre polynomials. The results are in good agreement with a model from the Bonn-Gatchina group, which uses an interference of P 11 and S 11 partial waves to explain the narrow structure.« less

  10. DESIGN CHARACTERISTICS OF THE IDAHO NATIONAL LABORATORY HIGH-TEMPERATURE GAS-COOLED TEST REACTOR

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Sterbentz, James; Bayless, Paul; Strydom, Gerhard

    2016-11-01

    Uncertainty and sensitivity analysis is an indispensable element of any substantial attempt in reactor simulation validation. The quantification of uncertainties in nuclear engineering has grown more important and the IAEA Coordinated Research Program (CRP) on High-Temperature Gas Cooled Reactor (HTGR) initiated in 2012 aims to investigate the various uncertainty quantification methodologies for this type of reactors. The first phase of the CRP is dedicated to the estimation of cell and lattice model uncertainties due to the neutron cross sections co-variances. Phase II is oriented towards the investigation of propagated uncertainties from the lattice to the coupled neutronics/thermal hydraulics core calculations.more » Nominal results for the prismatic single block (Ex.I-2a) and super cell models (Ex.I-2c) have been obtained using the SCALE 6.1.3 two-dimensional lattice code NEWT coupled to the TRITON sequence for cross section generation. In this work, the TRITON/NEWT-flux-weighted cross sections obtained for Ex.I-2a and various models of Ex.I-2c is utilized to perform a sensitivity analysis of the MHTGR-350 core power densities and eigenvalues. The core solutions are obtained with the INL coupled code PHISICS/RELAP5-3D, utilizing a fixed-temperature feedback for Ex. II-1a.. It is observed that the core power density does not vary significantly in shape, but the magnitude of these variations increases as the moderator-to-fuel ratio increases in the super cell lattice models.« less

  11. Cluster bulleticity

    NASA Astrophysics Data System (ADS)

    Massey, Richard; Kitching, Thomas; Nagai, Daisuke

    2011-05-01

    The unique properties of dark matter are revealed during collisions between clusters of galaxies, such as the bullet cluster (1E 0657-56) and baby bullet (MACS J0025-12). These systems provide evidence for an additional, invisible mass in the separation between the distributions of their total mass, measured via gravitational lensing, and their ordinary 'baryonic' matter, measured via its X-ray emission. Unfortunately, the information available from these systems is limited by their rarity. Constraints on the properties of dark matter, such as its interaction cross-section, are therefore restricted by uncertainties in the individual systems' impact velocity, impact parameter and orientation with respect to the line of sight. Here we develop a complementary, statistical measurement in which every piece of substructure falling into every massive cluster is treated as a bullet. We define 'bulleticity' as the mean separation between dark matter and ordinary matter, and we measure the signal in hydrodynamical simulations. The phase space of substructure orbits also exhibits symmetries that provide an equivalent control test. Any detection of bulleticity in real data would indicate a difference in the interaction cross-sections of baryonic and dark matter that may rule out hypotheses of non-particulate dark matter that are otherwise able to model individual systems. A subsequent measurement of bulleticity could constrain the dark matter cross-section. Even with conservative estimates, the existing Hubble Space Telescope archive should yield an independent constraint tighter than that from the bullet cluster. This technique is then trivially extendable to and benefits enormously from larger, future surveys.

  12. Analysis of the static magnetic field-dependent optical transmission of Ni nanorod colloidal suspensions

    NASA Astrophysics Data System (ADS)

    Krämer, Florian; Gratz, Micha; Tschöpe, Andreas

    2016-07-01

    The magnetic field-dependent optical transmission of dilute Ni nanorod aqueous suspensions was investigated. A series of four samples of nanorods were synthesized using the AAO template method and processed to stable colloids. The distributions of their length and diameter were characterized by analysis of TEM images and revealed average diameters of ˜25 nm and different lengths in the range of 60 nm-1100 nm. The collinear magnetic and optical anisotropy was studied by static field-dependent transmission measurements of linearly polarized light parallel and perpendicular to the magnetic field direction. The experimental results were modelled assuming the field-dependent orientation distribution function of a superparamagnetic ensemble for the uniaxial ferromagnetic nanorods in liquid dispersion and extinction cross sections for longitudinal and transversal optical polarization derived from different approaches, including the electrostatic approximation and the separation of variables method, both applied to spheroidal particles, as well as finite element method simulations of spheroids and capped cylindrical particles. The extinction cross sections were compared to reveal the differences associated with the approximations of homogeneous polarization and/or particle shape. The consequences of these approximations for the quantitative analysis of magnetic field-dependent optical transmission measurements were investigated and a reliable protocol derived. Furthermore, the changes in optical cross sections induced by electromagnetic interaction between two nanorods in parallel end-to-end and side-by-side configuration as a function of their separation were studied.

  13. Method and apparatus for ion mobility spectrometry with alignment of dipole direction (IMS-ADD)

    DOEpatents

    Shvartsburg, Alexandre A [Richland, WA; Tang, Keqi [Richland, WA; Smith, Richard D [Richland, WA

    2007-01-30

    Techniques and instrumentation are described for analyses of substances, including complex samples/mixtures that require separation prior to characterization of individual components. A method is disclosed for separation of ion mixtures and identification of ions, including protein and other macromolecular ions and their different structural isomers. Analyte ions are not free to rotate during the separation, but are substantially oriented with respect to the drift direction. Alignment is achieved by applying, at a particular angle to the drift field, a much stronger alternating electric field that "locks" the ion dipoles with moments exceeding a certain value. That value depends on the buffer gas composition, pressure, and temperature, but may be as low as .about.3 Debye under certain conditions. The presently disclosed method measures the direction-specific cross-sections that provide the structural information complementing that obtained from known methods, and, when coupled to those methods, increases the total peak capacity and specificity of gas-phase separations. Simultaneous 2-D separations by direction-specific cross sections along and orthogonally to the ion dipole direction are also possible.

  14. A fast and complete GEANT4 and ROOT Object-Oriented Toolkit: GROOT

    NASA Astrophysics Data System (ADS)

    Lattuada, D.; Balabanski, D. L.; Chesnevskaya, S.; Costa, M.; Crucillà, V.; Guardo, G. L.; La Cognata, M.; Matei, C.; Pizzone, R. G.; Romano, S.; Spitaleri, C.; Tumino, A.; Xu, Y.

    2018-01-01

    Present and future gamma-beam facilities represent a great opportunity to validate and evaluate the cross-sections of many photonuclear reactions at near-threshold energies. Monte Carlo (MC) simulations are very important to evaluate the reaction rates and to maximize the detection efficiency but, unfortunately, they can be very cputime-consuming and in some cases very hard to reproduce, especially when exploring near-threshold cross-section. We developed a software that makes use of the validated tracking GEANT4 libraries and the n-body event generator of ROOT in order to provide a fast, realiable and complete MC tool to be used for nuclear physics experiments. This tool is indeed intended to be used for photonuclear reactions at γ-beam facilities with ELISSA (ELI Silicon Strip Array), a new detector array under development at the Extreme Light Infrastructure - Nuclear Physics (ELI-NP). We discuss the results of MC simulations performed to evaluate the effects of the electromagnetic induced background, of the straggling due to the target thickness and of the resolution of the silicon detectors.

  15. Strong field localization in subwavelength metal-dielectric optical waveguides

    NASA Astrophysics Data System (ADS)

    Kozina, O. N.; Mel'Nikov, L. A.; Nefedov, I. S.

    2011-08-01

    Detailed calculations of eigenmodes of waveguiding structures made of silver and glass and containing coaxial cables with a nanoscale cross section of different configurations are conducted. In particular, the study focuses on optical coaxial waveguides with the core made in the form of a thin metallic cylinder filled with a dielectric. We show that these waveguides support relatively low-loss propagation of radiation that is strongly localized in the central region, has phase velocity approaching the speed of light and predominant electric-field orientation (dipole type). Optical characteristics of such waveguides are compared with those of coaxial-type waveguides containing a continuous central filament made of metal and with a multilayer structure. Using numeric modeling, we established that the proposed type of the waveguide enables the transmission of an optical image with relatively low losses with a submicron resolution over a distance considerably longer than its cross section. A typical propagation length in the waveguides based on silver and glass with the refractive index of about 1.5 at a wavelength of 500 nm is about 1700 nm.

  16. Personal values, marketing attitudes and nutrition trust are associated with patronage of convenience food outlets in the Asia-Pacific region: a cross-sectional study.

    PubMed

    De Jong, Breanna; Worsley, Anthony; Wang, Wei Chun; Sarmugam, Rani; Pham, Quynh; Februhartanty, Judhiastuty; Ridley, Stacey

    2017-02-16

    An online cross-sectional survey examined the relationships between the demographic characteristics, personal values, trust in sources of nutrition information and the use of convenience food outlets among middle-class household food providers in the Asia-Pacific region. The survey was administered to 3945 household food providers in Melbourne, Singapore, Shanghai, Vietnam and Indonesia in late 2013. Information about demographics, personal values, trust in sources of nutrition information and use of convenience food outlets was elicited. Exploratory factor analysis, two-step clustering and logistic regression were employed. The analyses found that the use of convenience food outlets was positively related to hedonist values and trust in food industry sources of nutrition information. However, lesser use of convenience food outlets and trust in health sources of nutrition information was associated with traditional (community-oriented) values. Further replication and extension of these findings would be useful. However, they suggest that improvements in the quality of foods sold in convenience food outlets combined with stronger regulation of food marketing and long-term food education are required.

  17. Flat ion milling: a powerful tool for preparation of cross-sections of lead-silver alloys.

    PubMed

    Brodusch, Nicolas; Boisvert, Sophie; Gauvin, Raynald

    2013-06-01

    While conventional mechanical and chemical polishing results in stress, deformation and polishing particles embedded on the surface, flat milling with Ar+ ions erodes the material with no mechanical artefacts. This flat milling process is presented as an alternative method to prepare a Pb-Ag alloy cross-section for scanning electron microscopy. The resulting surface is free of scratches with very little to no stress induced, so that electron diffraction and channelling contrast are possible. The results have shown that energy dispersive spectrometer (EDS) mapping, electron channelling contrast imaging and electron backscatter diffraction can be conducted with only one sample preparation step. Electron diffraction patterns acquired at 5 keV possessed very good pattern quality, highlighting an excellent surface condition. An orientation map was acquired at 20 keV with an indexing rate of 90.1%. An EDS map was performed at 5 keV, and Pb-Ag precipitates of sizes lower than 100 nm were observed. However, the drawback of the method is the generation of a noticeable surface topography resulting from the interaction of the ion beam with a polycrystalline and biphasic sample.

  18. Time perspective, optimistic bias, and self-control among different statuses of university smokers in China: a cross-sectional study.

    PubMed

    Xu, Ying; Yang, Yang; Ma, Xiao

    2018-01-09

    Risk behavior often seems 'self-defeating' to the observers. Most people understand the basic health-related knowledge, but some of them still choose to continue risk behaviors, especially for the young. This study aimed to examine time perspective, optimism bias and self control correlated with smoking behavior in Chinese college students. A cross-sectional survey enrolling 3016 university students in Chengdu City, Sichuan Province, China. Influence Factors were identified using multiple logistic regression analyses. Prevalence of current smoking was 20.92% (631 smokers), including 272 daily smokers (9.02%) and 359 non-daily smokers (11.90%). Future-oriented time perspective, general capacity for self-discipline, reliability and ethnicity were protective factors of smoking behavior. Possibility of self-suffering diseases and gender were risk factors of smoking behavior. Smoking in University of Chengdu, China is a severe problem. Results in this research have suggested that irrespective of the smoking level, improving health-related knowledge, time management awareness and self-control ability may contribute to reducing the prevalence of smoking behavior.

  19. Sex differences in gender characteristics of Australian nurses and male engineers: a comparative cross-sectional survey.

    PubMed

    J Fisher, Murray

    2011-08-01

    There continue to be assumptions within the nursing literature that nursing is synonymous with a feminine sex role identity. A comparative cross-sectional survey consisting of the Bem Sex Role Inventory and the Australian sex role scale was used to determine sex difference in gender characteristics of Australian nurses and with male engineers. A statistically significant difference in femininity was found between all the samples (F((2,908)) = 20.24, p < 0.00001; F((2,908)) = 60.13, p < 0.00001). A statistical difference in masculinity was found between female nurses and the two male samples on the two masculine scales (F((2,908)) = 12.48, p < 0.000001; F((2,908)) = 6.94, p = 0.001). Path analysis found strong significant direct relationships between the samples and expressive orientation (t = 27.67) and self display (t = 12.42). Whilst differences in expressive characteristics were found between male and female nurses, a similar difference was found between male nurses and male engineers, supporting the notion that male nurses perceive themselves as having feminine characteristics essentially required for nursing.

  20. Joint passive radar tracking and target classification using radar cross section

    NASA Astrophysics Data System (ADS)

    Herman, Shawn M.

    2004-01-01

    We present a recursive Bayesian solution for the problem of joint tracking and classification of airborne targets. In our system, we allow for complications due to multiple targets, false alarms, and missed detections. More importantly, though, we utilize the full benefit of a joint approach by implementing our tracker using an aerodynamically valid flight model that requires aircraft-specific coefficients such as wing area and vehicle mass, which are provided by our classifier. A key feature that bridges the gap between tracking and classification is radar cross section (RCS). By modeling the true deterministic relationship that exists between RCS and target aspect, we are able to gain both valuable class information and an estimate of target orientation. However, the lack of a closed-form relationship between RCS and target aspect prevents us from using the Kalman filter or its variants. Instead, we rely upon a sequential Monte Carlo-based approach known as particle filtering. In addition to allowing us to include RCS as a measurement, the particle filter also simplifies the implementation of our nonlinear non-Gaussian flight model.

  1. Joint passive radar tracking and target classification using radar cross section

    NASA Astrophysics Data System (ADS)

    Herman, Shawn M.

    2003-12-01

    We present a recursive Bayesian solution for the problem of joint tracking and classification of airborne targets. In our system, we allow for complications due to multiple targets, false alarms, and missed detections. More importantly, though, we utilize the full benefit of a joint approach by implementing our tracker using an aerodynamically valid flight model that requires aircraft-specific coefficients such as wing area and vehicle mass, which are provided by our classifier. A key feature that bridges the gap between tracking and classification is radar cross section (RCS). By modeling the true deterministic relationship that exists between RCS and target aspect, we are able to gain both valuable class information and an estimate of target orientation. However, the lack of a closed-form relationship between RCS and target aspect prevents us from using the Kalman filter or its variants. Instead, we rely upon a sequential Monte Carlo-based approach known as particle filtering. In addition to allowing us to include RCS as a measurement, the particle filter also simplifies the implementation of our nonlinear non-Gaussian flight model.

  2. Geometrical and band-structure effects on phonon-limited hole mobility in rectangular cross-sectional germanium nanowires

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Tanaka, H., E-mail: tanaka@semicon.kuee.kyoto-u.ac.jp; Mori, S.; Morioka, N.

    2014-12-21

    We calculated the phonon-limited hole mobility in rectangular cross-sectional [001], [110], [111], and [112]-oriented germanium nanowires, and the hole transport characteristics were investigated. A tight-binding approximation was used for holes, and phonons were described by a valence force field model. Then, scattering probability of holes by phonons was calculated taking account of hole-phonon interaction atomistically, and the linearized Boltzmann's transport equation was solved to calculate the hole mobility at low longitudinal field. The dependence of the hole mobility on nanowire geometry was analyzed in terms of the valence band structure of germanium nanowires, and it was found that the dependencemore » was qualitatively reproduced by considering an average effective mass and the density of states of holes. The calculation revealed that [110] germanium nanowires with large height along the [001] direction show high hole mobility. Germanium nanowires with this geometry are also expected to exhibit high electron mobility in our previous work, and thus they are promising for complementary metal-oxide-semiconductor (CMOS) applications.« less

  3. Motivation of Young Students: A Cross-Cultural Evaluation of a Model for Motivational Orientations

    ERIC Educational Resources Information Center

    van der Aalsvoort, Geerdina Maria; Lepola, Janne; Overtoom, Lisette; Laitinen, Satu

    2015-01-01

    It is a challenge for an early education teacher to enhance the development of self-regulation of young children to become and stay motivated for tasks that elicit school-related skills that do not immediately make sense for them. Being aware of motivational orientations in young students is therefore a must. In the study, a cross-cultural…

  4. Strain relaxation induced surface morphology of heterogeneous GaInNAs layers grown on GaAs substrate

    NASA Astrophysics Data System (ADS)

    Gelczuk, Ł.; Jóźwiak, G.; Moczała, M.; Dłużewski, P.; Dąbrowska-Szata, M.; Gotszalk, T. P.

    2017-07-01

    The partially-relaxed heterogeneous GaInNAs layers grown on GaAs substrate by atmospheric pressure vapor phase epitaxy (AP-MOVPE) were investigated by transmission electron microscopy (TEM) and atomic force microscopy (AFM). The planar-view TEM image shows a regular 2D network of misfit dislocations oriented in two orthogonal 〈1 1 0〉 crystallographic directions at the (0 0 1) layer interface. Moreover, the cross-sectional view TEM image reveals InAs-rich and V-shaped precipitates in the near surface region of the GaInNAs epitaxial layer. The resultant undulating surface morphology, known as a cross-hatch pattern, is formed as observed by AFM. The numerical analysis of the AFM image of the GaInNAs layer surface with the well-defined cross-hatch morphology enabled us to determine a lower bound of actual density of misfit dislocations. However, a close correspondence between the asymmetric distribution of interfacial misfit dislocations and undulating surface morphology is observed.

  5. Morphology of the pore space in claystones - evidence from BIB/FIB ion beam sectioning and cryo-SEM observations

    NASA Astrophysics Data System (ADS)

    Desbois, G.; Urai, J. L.; Kukla, P. A.

    2009-12-01

    Mudrocks and clay-rich fault gouges are important mechanical elements in the Earth’s crust and form seals for crustal fluids such as groundwater and hydrocarbons. Other fields of interest are the storage of anthropogenic carbon dioxide and radioactive waste in geologic formations. In addition, coupled flows, capillary processes, and associated deformation are of importance in many applied fields. A key factor to understanding these processes is a detailed understanding of the morphology of the pore space. Classic studies of porosity in fine grained materials are performed on dried or freeze dried samples and include metal injection methods, magnetic susceptibility measurement, SEM and TEM imaging, neutron scattering, NMR spectroscopy, and ESEM. Confocal microscopy and X-ray tomography are used to image porosity in coarse grained sediments but the resolution of these techniques is not sufficient at present for applications to mudrocks or clay-rich fault gouges. Therefore, observations and interpretations remain difficult because none of these approaches is able to directly describe the in-situ porosity at the pore scale. In addition, some methods require dried samples in which the natural structure of pores may have been damaged to some extent due to desiccation and dehydration of the clay minerals. A recently developed alternative is to study wet samples using a cryo-SEM, which allows stabilization of wet media at cryo-temperature, in-situ sample preparation by ion beam cross-sectioning (BIB, FIB) and observations of the stabilized microstructure at high resolution. We report on a study of Boom clay from a proposed disposal site of radioactive waste (Mol site, Belgium) using cryo-SEM at cryogenic temperature, with ion beam cross-sectioning to prepare smooth, damage free surfaces. Pores commonly have crack-like tips, preferred orientation parallel to bedding and power law size distribution. We define a number of pore types depending on shape and location in the microstructure. 3-D reconstruction by serial cross-sectioning shows 3-D connectivity of the pore space. These findings offer a new insight into the morphology of pores down to nano-scale and provide the basis for microstructure-based models of transport in clays. SEM image (SE) of a Broad Ion Beam polished cross-section performed on dry Boom clay (Mol site, Belgium) showing the 2D apparent porosity (26.3%). The cross-section is perpendicular to the bedding.

  6. Incorporating Orienteering in School Programs.

    ERIC Educational Resources Information Center

    Bradford, Douglas

    Orienteering has been described as being "either a serious sport, or a relaxing recreation". Orienteering can be a family affair or an individual fight against the clock. In its simplest form, orienteering can be described as a cross-country run, jog, or walk on a predetermined course, using a map and a compass to find several control points on…

  7. Determination of Small Animal Long Bone Properties Using Densitometry

    NASA Technical Reports Server (NTRS)

    Breit, Gregory A.; Goldberg, BethAnn K.; Whalen, Robert T.; Hargens, Alan R. (Technical Monitor)

    1996-01-01

    Assessment of bone structural property changes due to loading regimens or pharmacological treatment typically requires destructive mechanical testing and sectioning. Our group has accurately and non-destructively estimated three dimensional cross-sectional areal properties (principal moments of inertia, Imax and Imin, and principal angle, Theta) of human cadaver long bones from pixel-by-pixel analysis of three non-coplanar densitometry scans. Because the scanner beam width is on the order of typical small animal diapbyseal diameters, applying this technique to high-resolution scans of rat long bones necessitates additional processing to minimize errors induced by beam smearing, such as dependence on sample orientation and overestimation of Imax and Imin. We hypothesized that these errors are correctable by digital image processing of the raw scan data. In all cases, four scans, using only the low energy data (Hologic QDR-1000W, small animal mode), are averaged to increase image signal-to-noise ratio. Raw scans are additionally processed by interpolation, deconvolution by a filter derived from scanner beam characteristics, and masking using a variable threshold based on image dynamic range. To assess accuracy, we scanned an aluminum step phantom at 12 orientations over a range of 180 deg about the longitudinal axis, in 15 deg increments. The phantom dimensions (2.5, 3.1, 3.8 mm x 4.4 mm; Imin/Imax: 0.33-0.74) were comparable to the dimensions of a rat femur which was also scanned. Cross-sectional properties were determined at 0.25 mm increments along the length of the phantom and femur. The table shows average error (+/- SD) from theory of Imax, Imin, and Theta) over the 12 orientations, calculated from raw and fully processed phantom images, as well as standard deviations about the mean for the femur scans. Processing of phantom scans increased agreement with theory, indicating improved accuracy. Smaller standard deviations with processing indicate increased precision and repeatability. Standard deviations for the femur are consistent with those of the phantom. We conclude that in conjunction with digital image enhancement, densitometry scans are suitable for non-destructive determination of areal properties of small animal bones of comparable size to our phantom, allowing prediction of Imax and Imin within 2.5% and Theta within a fraction of a degree. This method represents a considerable extension of current methods of analyzing bone tissue distribution in small animal bones.

  8. Scattering from randomly oriented circular discs with application to vegetation

    NASA Technical Reports Server (NTRS)

    Karam, M. A.; Fung, A. K.

    1984-01-01

    A vegetation layer is modeled by a collection of randomly oriented circular discs over a half space. The backscattering coefficient from such a half space is computed using the radiative transfer theory. It is shown that significantly different results are obtained from this theory as compared with some earlier investigations using the same modeling approach but with restricted disc orientations. In particular, the backscattered cross polarized returns cannot have a fast increasing angular trend which is inconsistent with measurements. By setting the appropriate angle of orientation to zero the theory reduces to previously published results. Comparisons are shown with measurements taken from milo, corn and wheat and good agreements are obtained for both polarized and cross polarized returns.

  9. Scattering from randomly oriented circular discs with application to vegetation

    NASA Technical Reports Server (NTRS)

    Karam, M. A.; Fung, A. K.

    1983-01-01

    A vegetation layer is modeled by a collection of randomly oriented circular discs over a half space. The backscattering coefficient from such a half space is computed using the radiative transfer theory. It is shown that significantly different results are obtained from this theory as compared with some earlier investigations using the same modeling approach but with restricted disc orientations. In particular, the backscattered cross-polarized returns cannot have a fast increasing angular trend which is inconsistent with measurements. By setting the appropriate angle of orientation to zero the theory reduces to previously published results. Comparisons are shown with measurements taken from milo, corn and wheat and good agreements are obtained for both polarized and cross-polarized returns.

  10. Electron Capture in Proton Collisions with CO.

    NASA Astrophysics Data System (ADS)

    Stancil, P. C.; Schultz, D. R.; Kimura, M.; Gu, J.-P.; Hirsch, G.; Buenker, R. J.; Li, Y.

    1999-10-01

    Electron capture by protons following collisions with carbon monoxide is studied with a variety of theoretical approaches including quantal and semiclassical molecular-orbital close-coupling (MOCC) and classical trajectory Monte Carlo (CTMC) techniques. The MOCC treatments utilize potential surfaces and couplings computed for a range of H^+-CO orientation angles and C-O separations. Results including integral, differential, electronic state-selective, and vibrational state-selective cross sections will be presented for low- to intermediate-energies. Comparison with experiment will be made where possible and the relevance of the reaction in astrophysics and atmospheric physics will be discussed.

  11. Characterization of the Micro Textures in a Friction Stir Weld

    NASA Technical Reports Server (NTRS)

    Schneider, Judy; Nunes, Arthur C.

    2004-01-01

    In friction stir welding (FSW), a rotating threaded pin tool is inserted into a weld seam and literally stirs the edges of the seam together. The Dynamically-Recrystallized-Zone (DXZ) of a polished and etched FSW cross-section exhibits contrasting bands (the "onion-ring" structure), the origins of which are unclear. An orientation image mapping (OIM) study suggests that the corresponding bands may correspond respectively to a "straight-through" current of metal bypassing the pin tool in a single rotation or less and a "maelstrom" current rotating a number of times around the pin tool.

  12. Properties of oscillating refractive optical wings with one reflective surface

    NASA Astrophysics Data System (ADS)

    Artusio-Glimpse, Alexandra B.; Swartzlander, Grover A.

    2013-09-01

    A new modality for optical micromanipulation is under investigation. Optical wings are shaped refractive objects that experience a force and torque owing to the reflection and transmission of uniform light at the object surface. We present wing designs that provide a restoring torque that returns the wing to a source facing orientation while preserving efficient thrust from radiation pressure. The torsional stiffness and orbital period of a set of optical wing cross-sectional shapes are determined from numerical ray-tracing analyses. These results demonstrate the potential to develop an efficient optomechanical device for applications in microbiology and space flight systems.

  13. Spin in Compton scattering with pronounced polarization dynamics

    NASA Astrophysics Data System (ADS)

    Ahrens, Sven; Sun, Chang-Pu

    2017-12-01

    We theoretically investigate a scattering configuration in Compton scattering, in which the orientation of the electron spin is reversed and, simultaneously, the photon polarization changes from linear polarization into circular polarization. The intrinsic angular momentum of electron and photon are computed along the coincident propagation direction of the incoming and outgoing photon. We find that this intrinsic angular momentum is not conserved in the considered scattering process. We also discuss the generation of entanglement for the considered scattering setup and present an angle-dependent investigation of the corresponding differential cross section, Stokes parameters, and spin expectation.

  14. It is complicated: gender and sexual orientation identity in LGBTQ youth.

    PubMed

    Bosse, Jordon D; Chiodo, Lisa

    2016-12-01

    To explore the variations of sexual orientation and gender identity as well as the intersections of those identities in a sample of lesbian, gay, bisexual, transgender, queer, and questioning youth. Identity development is a key task of adolescence. Among the multiple identities that young people navigate are sexual orientation and gender identity. Challenges with solidifying and integrating aspects of one's identity can contribute to poor physical and mental health outcomes. Cross-sectional descriptive survey. A convenience sample was recruited via collaborations with community organisations and Internet groups who provide information and services for LGBTQ youth under the age of 25. Of the 175 respondents, one-third of the sample reported a gender identity that was not congruent with their sex assigned at birth. Those assigned female sex at birth reported noncongruent gender identities as well as fluid and nonbinary identities such as genderqueer and agender more frequently that respondents assigned male at birth. Individuals with noncongruent gender identities were more likely to identify with a sexual orientation other than lesbian, gay or bisexual than individuals with gender identities congruent with their sex assigned at birth. Adolescent sexual orientation and gender identity are complex and nuanced. Nurse scientists and clinical nurses can contribute to understanding of these identities, their meaning to the young person and the unique health implications by regularly inquiring about sexual orientation and gender identity in their practice. Nurses in clinical practice need to be aware of the sometimes complicated nature of adolescent identity and its related terminology so that they can ask relevant questions and provide culturally safe care. © 2016 John Wiley & Sons Ltd.

  15. Dating violence, quality of life and mental health in sexual minority populations: a path analysis.

    PubMed

    Wong, Janet Yuen-Ha; Choi, Edmond Pui-Hang; Lo, Herman Hay-Ming; Wong, Wendy; Chio, Jasmine Hin-Man; Choi, Anna Wai-Man; Fong, Daniel Yee-Tak

    2017-04-01

    Theories explaining the impact of intimate partner violence (IPV) on mental health have focused on heterosexual relationships. It is unclear whether mental health disparities between heterosexual and sexual minority people are due to IPV or factors related to sexual orientation. The present study aimed to investigate pathways of how sexual orientation influenced quality of life and mental health. The present cross-sectional study was conducted in 1076 young adults in a university population (934 heterosexual and 142 sexual minority groups). Structural equation modelling was used to examine the pathways of sexual orientation, dating violence, sexual orientation concealment, quality of life and mental health (perceived stress, anxiety and depression). After adjusting for sociodemographic factors, quality of life in sexual minority people was poorer [estimate -2.82, 95 % confidence interval (CI) -4.77 to -0.86, p = 0.005], and stress (estimate 2.77, 95 % CI 1.64-3.92, p < 0.0001), anxiety (estimate 1.84, 95 % CI 1.13-2.56, p < 0.0001) and depression levels (estimate 0.62, 95 % CI 0.05-1.2, p < 0.0001) were higher than in heterosexual people. Dating violence and sexual orientation concealment were mediators, with the models showing a good fit. Our study has progressed investigation of the link between sexual orientation and quality of life and mental health in the Chinese context. It has helped identify health disparities between heterosexual and sexual minority people and determined specific factors affecting their quality of life and mental health.

  16. Structure and function of cytochrome c2 in electron transfer complexes with the photosynthetic reaction center of Rhodobacter sphaeroides: optical linear dichroism and EPR.

    PubMed

    Drepper, F; Mathis, P

    1997-02-11

    The photosynthetic reaction center (RC) and its secondary electron donor the water-soluble cytochrome (cyt) c2 from the purple bacterium Rhodobacter sphaeroides have been used in cross-linked and non-cross-linked complexes, oriented in compressed gels or partially dried multilayers, to study the respective orientation of the primary donor P (BChl dimer) and of cyt c2. Three methods were used: (i) Polarized optical absorption spectra at 295 and 10 K were measured and the linear dichroism of the two individual transitions (Qx, Qy), which are nearly degenerate within the alpha-band of reduced cyt c2, was determined. Attribution of the polarization directions to the molecular axes within the heme plane yielded the average cyt orientation in the complexes. (ii) Time-resolved flash absorption measurements using polarized light allowed determination of the orientation of cyt c2 in complexes which differ in their kinetics of electron transfer. (iii) EPR spectroscopy of ferricyt c2 in cross-linked RC-cyt c2 complexes was used to determine the angle between the heme and the membrane plane. The results suggest the following structural properties for the docking of cyt c2 to the RC: (i) In cross-linked complexes, the two cytochromes displaying half-lives of 0.7 and 60 micros for electron transfer to P+ are similarly oriented (difference < 10 degrees). (ii) For cross-linked cyt c2 the heme plane is parallel to the symmetry axis of the RC (0 degrees +/- 10 degrees). Moreover, the Qy transition, which is assumed to be polarized within the ring III-ring I direction of the heme plane, makes an angle of 56 degrees +/- 1 degree with the symmetry axis. (iii) The dichroism spectrum for the fast phase (0.7 micros) for the non-cross-linked cyt c2-RC complex suggests an orientation similar to that of cross-linked cyt c2, but the heme plane is tilted about 20 degrees closer to the membrane. An alternative model is that two or more bound states of cyt c2 with heme plane tilt angles between 0 degrees and 30 degrees allow the fast electron transfer. Zero-length cross-linking of cyt c2 may take place in one of these bound states. These orientations of cyt c2 are compared to different structural models of RC-cyt c2 complexes proposed previously. The relation of the two kinetic phases observed in cross-linked cyt c2 complexes to biphasic kinetics of the mobile reaction partners is discussed with respect to the dynamic electrostatic interactions during the formation of a docking complex and its dissociation. A mechanism is proposed in which a pre-orientation of cyt c2 relative to the membrane plane occurs by interaction of its strong electrostatic dipole with the negative surface charges of the RC. The optimal matching of the oppositely charged surfaces of the two proteins necessitates further rotation of the cyt around its dipole axis.

  17. Self-concept clarity and religious orientations: prediction of purpose in life and self-esteem.

    PubMed

    Błażek, Magdalena; Besta, Tomasz

    2012-09-01

    The present study concerns the relationship between self-concept clarity, religiosity, and well-being, as well as the mediating influence of religiosity on the relationship between self-concept clarity and sense of meaning in life and self-esteem. Self-concept clarity was found to be a significant predictor of sense of meaning in life and self-esteem; intrinsic religious orientation was found to be a predictor of sense of meaning in life, while the quest religious orientation was a predictor for self-esteem. The cross-products of self-concept clarity and intrinsic religious orientation were found to be related to the sense of purpose in life, which would point to religiosity being a mediator of the relationship between self-concept clarity and sense of purpose in life. The cross-products of self-concept clarity and quest religious orientation were found to be a predictor of self-esteem, which indicates a mediating effect of this religious orientation in the relationship of self-concept clarity and self-esteem.

  18. Cross-orientation suppression in human visual cortex

    PubMed Central

    Heeger, David J.

    2011-01-01

    Cross-orientation suppression was measured in human primary visual cortex (V1) to test the normalization model. Subjects viewed vertical target gratings (of varying contrasts) with or without a superimposed horizontal mask grating (fixed contrast). We used functional magnetic resonance imaging (fMRI) to measure the activity in each of several hypothetical channels (corresponding to subpopulations of neurons) with different orientation tunings and fit these orientation-selective responses with the normalization model. For the V1 channel maximally tuned to the target orientation, responses increased with target contrast but were suppressed when the horizontal mask was added, evident as a shift in the contrast gain of this channel's responses. For the channel maximally tuned to the mask orientation, a constant baseline response was evoked for all target contrasts when the mask was absent; responses decreased with increasing target contrast when the mask was present. The normalization model provided a good fit to the contrast-response functions with and without the mask. In a control experiment, the target and mask presentations were temporally interleaved, and we found no shift in contrast gain, i.e., no evidence for suppression. We conclude that the normalization model can explain cross-orientation suppression in human visual cortex. The approach adopted here can be applied broadly to infer, simultaneously, the responses of several subpopulations of neurons in the human brain that span particular stimulus or feature spaces, and characterize their interactions. In addition, it allows us to investigate how stimuli are represented by the inferred activity of entire neural populations. PMID:21775720

  19. Intravenous volume tomographic pulmonary angiography imaging

    NASA Astrophysics Data System (ADS)

    Ning, Ruola; Strang, John G.; Chen, Biao; Conover, David L.; Yu, Rongfeng

    1999-05-01

    This study presents a new intravenous (IV) tomographic angiography imaging technique, called intravenous volume tomographic digital angiography (VTDA) for cross sectional pulmonary angiography. While the advantages of IV-VTDA over spiral CT in terms of volume scanning time and resolution have been validated and reported in our previous papers for head and neck vascular imaging, the superiority of IV-VTDA over spiral CT for cross sectional pulmonary angiography has not been explored yet. The purpose of this study is to demonstrate the advantage of isotropic resolution of IV-VTDA in the x, y and z directions through phantom and animal studies, and to explore its clinical application for detecting clots in pulmonary angiography. A prototype image intensifier-based VTDA imaging system has been designed and constructed by modifying a GE 8800 CT scanner. This system was used for a series of phantom and dog studies. A pulmonary vascular phantom was designed and constructed. The phantom was scanned using the prototype VTDA system for direct 3D reconstruction. Then the same phantom was scanned using a GE CT/i spiral CT scanner using the routine pulmonary CT angiography protocols. IV contrast injection and volume scanning protocols were developed during the dog studies. Both VTDA reconstructed images and spiral CT images of the specially designed phantom were analyzed and compared. The detectability of simulated vessels and clots was assessed as the function of iodine concentration levels, oriented angles, and diameters of the vessels and clots. A set of 3D VTDA reconstruction images of dog pulmonary arteries was obtained with different IV injection rates and isotropic resolution in the x, y and z directions. The results of clot detection studies in dog pulmonary arteries have also been shown. This study presents a new tomographic IV angiography imaging technique for cross sectional pulmonary angiography. The results of phantom and animal studies indicate that IV-VTDA is superior to spiral CT for cross sectional pulmonary angiography.

  20. Still in the closet: the invisible minority in medical education.

    PubMed

    Lapinski, Jessica; Sexton, Patricia

    2014-08-15

    To investigate the relationship between sexual orientation and gender identity in regard to levels of depression; levels of perceived social support; comfort with disclosure of orientation; and the lesbian, gay, bisexual, and transgender (LGBT) campus climate. E-mail invitations to participate in the current cross-sectional questionnaire-based study were sent to all thirty US osteopathic medical schools in August 2012; six schools responded and disseminated the survey to their students. Participating students completed an anonymous web-based survey, and informed consent was obtained when they accessed the survey. The survey was designed specifically for the current study but contained scales used with permission from previously published research. Analysis procedures included nonparametric tests, one-way analysis of variance and Pearson's correlations. Of the 4112 students invited to participate in the survey, 1334 (32.4%) completed it. Approximately 85% of respondents self-identified as heterosexual only. No respondents identified as transgender. In general, LGB students indicated higher levels of depression (P < .001), slightly lower levels of perceived social support (P < .001), and more discomfort with disclosure of sexual orientation (P < .001). A majority of students rated their campus climate as noninclusive. Results of the current study indicated a relationship between sexual orientation and depression, perceived social support, comfort with disclosure of orientation, and the LGBT campus climate in osteopathic medical students. In the future, osteopathic medical schools should consider closely examining their campus culture in order to create a more positive and inclusive environment for all its students.

  1. Subgrain Rotation Behavior in Sn3.0Ag0.5Cu-Sn37Pb Solder Joints During Thermal Shock

    NASA Astrophysics Data System (ADS)

    Han, Jing; Tan, Shihai; Guo, Fu

    2018-01-01

    Ball grid array (BGA) samples were soldered on a printed circuit board with Sn37Pb solder paste to investigate the recrystallization induced by subgrain rotation during thermal shock. The composition of the solder balls was Sn3.0Ag0.5Cu-Sn37Pb, which comprised mixed solder joints. The BGA component was cross-sectioned before thermal shock. The microstructure and grain orientations were obtained by a scanning electron microscope equipped with an electron back-scattered diffraction system. Two mixed solder joints at corners of the BGA component were selected as the subjects. The results showed that recrystallization occurred at the corner of the solder joints after 200 thermal shock cycles. The recrystallized subgrains had various new grain orientations. The newly generated grain orientations were closely related to the initial grain orientations, which indicated that different subgrain rotation behaviors could occur in one mixed solder joint with the same initial grain orientation. When the misorientation angles were very small, the rotation axes were about Sn [100], [010] and [001], as shown by analyzing the misorientation angles and subgrain rotation axes, while the subgrain rotation behavior with large misorientation angles in the solder joints was much more complicated. As Pb was contained in the solder joints and the stress was concentrated on the corner of the mixed solder joints, concaves and cracks were formed. When the adjacent recrystallized subgrains were separated, and the process of the continuous recrystallization was limited.

  2. Sexual Orientation Disclosure in Primary Care Settings by Gay, Bisexual, and Other Men Who Have Sex with Men in a Canadian City.

    PubMed

    Coleman, Todd A; Bauer, Greta R; Pugh, Daniel; Aykroyd, Gloria; Powell, Leanne; Newman, Rob

    2017-02-01

    Sexual orientation affects individuals' health histories and is fundamental to providers' understanding of patients as a whole. Gay, bisexual, and other men who have sex with men (GB-MSM) are vulnerable to certain health conditions, including HIV. The aim of this exploratory analysis was to examine factors associated with sexual orientation disclosure and communication with providers about GB-MSM health issues and to discuss implications. We conducted a cross-sectional internet survey of GB-MSM (n = 202) in London-Middlesex, Ontario, Canada; analyses were limited to those with a regular primary care provider (n = 173). Blockwise regression models explored demographic, psychosocial, and healthcare-related factors associated with sexual orientation disclosure and physician-patient communication about GB-MSM-related health. Just over seventy-one percent (71.1%) of participants reported that their primary care provider (PCP) knew their sexual orientation, and 44.5% had talked to them about GB-MSM health. Overt negative comments or being refused care based on sexual orientation occurred infrequently, although 26.6% reported their provider had assumed they were heterosexual. Being married to or living common-law with another man, more frequent experiences of homosexual prejudice, and higher quality assessment of provider's communication skills were associated with the PCP knowing respondents' sexual orientation. Greater internalized homonegativity was associated with not talking to a PCP about GB-MSM-related health issues. More frequent experiences of homosexual prejudice, higher assessment of provider communication, and having prior negative experiences with a PCP were significantly associated with talking to a PCP about GB-MSM health. The majority of our sample disclosed their sexual orientation; however, not all patients voluntarily disclose. Medical training and education in Canada, where specific rights protections exist for sexual orientation minority populations, should emphasize awareness of essential patient health information. Training should include information about GB-MSM health and building a foundation on how to speak with GB-MSM patients nonjudgmentally.

  3. A simple method for orienting silk and other flexible fibres in transmission electron microscopy specimens.

    PubMed

    Trancik, J E; Czernuszka, J T; Merriman, C; Viney, C

    2001-09-01

    When microstructures are characterized by transmission electron microscopy (TEM), the interpretation of results is facilitated if the material can be sectioned in defined orientations. In the case of fibres, it is especially useful if transverse and longitudinal sections can be obtained reliably. Here we describe a procedure for orienting spider silk and other flexible fibres for TEM investigation. Prior to embedding in epoxy resin, the silk is wound around a notched support made from polyester film. No glue is required. After the silk and its supporting film have been embedded and the resin has been cured the film can be peeled away to reveal nearly perfectly orientated silk threads. Both transverse and longitudinal sections can then be cut with a microtome. The method can be extended to obtain sections at any intermediate orientation.

  4. Ferroelectric and piezoelectric responses of (110) and (001)-oriented epitaxial Pb(Zr{sub 0.52}Ti{sub 0.48})O{sub 3} thin films on all-oxide layers buffered silicon

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Vu, Hien Thu; Nguyen, Minh Duc, E-mail: minh.nguyen@itims.edu.vn; Inorganic Materials Science

    2015-12-15

    Graphical abstract: The cross sections show a very dense structure in the (001)-oriented films (c,d), while an open columnar growth structure is observed in the case of the (110)-oriented films (a,b). The (110)-oriented PZT films show a significantly larger longitudinal piezoelectric coefficient (d33{sub ,f}), but smaller transverse piezoelectric coefficient (d31{sub ,f}) than the (001) oriented films. - Highlights: • We fabricate all-oxide, epitaxial piezoelectric PZT thin films on Si. • The orientation of the films can be controlled by changing the buffer layer stack. • The coherence of the in-plane orientation of the grains and grain boundaries affects the ferroelectricmore » properties. • Good cycling stability of the ferroelectric properties of (001)-oriented PZT thin films. The (110)-oriented PZT thin films show a larger d33{sub ,f} but smaller d31{sub ,f} than the (001)-oriented films. - Abstract: Epitaxial ferroelectric Pb(Zr{sub 0.52}Ti{sub 0.48})O{sub 3} (PZT) thin films were fabricated on silicon substrates using pulsed laser deposition. Depending on the buffer layers and perovskite oxide electrodes, epitaxial films with different orientations were grown. (110)-oriented PZT/SrRuO{sub 3} (and PZT/LaNiO{sub 3}) films were obtained on YSZ-buffered Si substrates, while (001)-oriented PZT/SrRuO{sub 3} (and PZT/LaNiO{sub 3}) were fabricated with an extra CeO{sub 2} buffer layer (CeO{sub 2}/YSZ/Si). There is no effect of the electrode material on the properties of the films. The initial remnant polarizations in the (001)-oriented films are higher than those of (110)-oriented films, but it increases to the value of the (001) films upon cycling. The longitudinal piezoelectric d33{sub ,f} coefficients of the (110) films are larger than those of the (001) films, whereas the transverse piezoelectric d31{sub ,f} coefficients in the (110)-films are less than those in the (001)-oriented films. The difference is ascribed to the lower density (connectivity between grains) of the former films.« less

  5. Relationship between Future Time Orientation and Item Nonresponse on Subjective Probability Questions: A Cross-Cultural Analysis.

    PubMed

    Lee, Sunghee; Liu, Mingnan; Hu, Mengyao

    2017-06-01

    Time orientation is an unconscious yet fundamental cognitive process that provides a framework for organizing personal experiences in temporal categories of past, present and future, reflecting the relative emphasis given to these categories. Culture lies central to individuals' time orientation, leading to cultural variations in time orientation. For example, people from future-oriented cultures tend to emphasize the future and store information relevant for the future more than those from present- or past-oriented cultures. For survey questions that ask respondents to report expected probabilities of future events, this may translate into culture-specific question difficulties, manifested through systematically varying "I don't know" item nonresponse rates. This study drew on the time orientation theory and examined culture-specific nonresponse patterns on subjective probability questions using methodologically comparable population-based surveys from multiple countries. The results supported our hypothesis. Item nonresponse rates on these questions varied significantly in the way that future-orientation at the group as well as individual level was associated with lower nonresponse rates. This pattern did not apply to non-probability questions. Our study also suggested potential nonresponse bias. Examining culture-specific constructs, such as time orientation, as a framework for measurement mechanisms may contribute to improving cross-cultural research.

  6. Relationship between Future Time Orientation and Item Nonresponse on Subjective Probability Questions: A Cross-Cultural Analysis

    PubMed Central

    Lee, Sunghee; Liu, Mingnan; Hu, Mengyao

    2017-01-01

    Time orientation is an unconscious yet fundamental cognitive process that provides a framework for organizing personal experiences in temporal categories of past, present and future, reflecting the relative emphasis given to these categories. Culture lies central to individuals’ time orientation, leading to cultural variations in time orientation. For example, people from future-oriented cultures tend to emphasize the future and store information relevant for the future more than those from present- or past-oriented cultures. For survey questions that ask respondents to report expected probabilities of future events, this may translate into culture-specific question difficulties, manifested through systematically varying “I don’t know” item nonresponse rates. This study drew on the time orientation theory and examined culture-specific nonresponse patterns on subjective probability questions using methodologically comparable population-based surveys from multiple countries. The results supported our hypothesis. Item nonresponse rates on these questions varied significantly in the way that future-orientation at the group as well as individual level was associated with lower nonresponse rates. This pattern did not apply to non-probability questions. Our study also suggested potential nonresponse bias. Examining culture-specific constructs, such as time orientation, as a framework for measurement mechanisms may contribute to improving cross-cultural research. PMID:28781381

  7. Paleoenvironmental interpretation of section of Rosario Formation in Ensenada, Baja California, Mexico

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Tellez-Duarte, M.A.; Ferman-Almada, J.L.

    In contrast to previous interpretations of the Rosario Formation in other parts of Baja California, a stratigraphic section 6 km north of Ensenada, Baja California, Mexico, contains evidences for deposition in shallow waters during a regressive event in a steep slope basin. Among the sedimentary evidence, the section shows a coarse, shoaling-upward sequence, with high-angle cross-stratification and planar bed lamination. Load structures with a westward orientation were found only at the base. The fossils assemblages support the same shoaling-upward interpretation as the sedimentary evidence, with ammonoids and deposit feeder trace fossils (such as Chondrites) at the bottom to mollusks andmore » suspension feeder trace fossils (such as Scolicia and Ophiomorpha, characteristic of shallower waters) at the top. This sedimentologic and paleontologic evidence suggests nearshore to beach coastal deposits. The contact between the section and a discontinuous thin limestone bed at the top of the section shows an unconformity. The absence of well-preserved fossils makes this limestone difficult to date, but the lithology is similar to that of Paleocene Sepultura Formation limestones.« less

  8. Effect of deformation and orientation on spin orbit density dependent nuclear potential

    NASA Astrophysics Data System (ADS)

    Mittal, Rajni; Kumar, Raj; Sharma, Manoj K.

    2017-11-01

    Role of deformation and orientation is investigated on spin-orbit density dependent part VJ of nuclear potential (VN=VP+VJ) obtained within semi-classical Thomas Fermi approach of Skyrme energy density formalism. Calculations are performed for 24-54Si+30Si reactions, with spherical target 30Si and projectiles 24-54Si having prolate and oblate shapes. The quadrupole deformation β2 is varying within range of 0.023 ≤ β2 ≤0.531 for prolate and -0.242 ≤ β2 ≤ -0.592 for oblate projectiles. The spin-orbit dependent potential gets influenced significantly with inclusion of deformation and orientation effect. The spin-orbit barrier and position gets significantly influenced by both the sign and magnitude of β2-deformation. Si-nuclei with β22<0 have higher spin-orbit barrier (compact spin-orbit configuration) in comparison to systems with β2>0. The possible role of spin-orbit potential on barrier characteristics such as barrier height, barrier curvature and on the fusion pocket is also probed. In reference to prolate and oblate systems, the angular dependence of spin-orbit potential is further studied on fusion cross-sections.

  9. Psychiatric rehabilitation in community-based day centres: motivation and satisfaction.

    PubMed

    Eklund, Mona; Tjörnstrand, Carina

    2013-11-01

    This study investigated attendees' motivation and motives for participation in day centres and their satisfaction with the rehabilitation, while also addressing the influence of day centre orientation (work- or meeting-place orientation), gender and age. Ninety-three Swedish day centre attendees participated in a cross-sectional study and completed questionnaires about motivation, motives, and satisfaction with the rehabilitation. Data were analysed with non-parametric statistics. The participants were highly motivated for going to the day centre and set clear goals for their rehabilitation. Female gender, but not age, was associated with stronger motivation. The strongest motives for going to the day centre were getting structure to the day and socializing. Attendees at work-oriented day centres more often expressed that they went there to get structure to the day and gain social status. Satisfaction with the rehabilitation was high, and the most common wishes for further opportunities concerned earning money and learning new things. The rehabilitation largely seemed to meet the attendees' needs, but the findings indicated that further developments were desired, such as participation in work on the open market and more work-like occupations in the day centre, accompanied by some kind of remuneration.

  10. Assessment of child and adult users of the degree of orientation of Primary Healthcare in the city of Rio de Janeiro, Brazil.

    PubMed

    Harzheim, Erno; Pinto, Luiz Felipe; Hauser, Lisiane; Soranz, Daniel

    2016-05-01

    In the first half of 2014, 6,675 adults and caregivers of children using Primary Care (PC) services in Rio de Janeiro were interviewed using the Primary Care Assessment Tool - PCATool-Brazil. The aim was to arrive at an accurate overview of the extent to which PC services in all of the Planning Areas (PA) of the Rio de Janeiro City Health Department (CHD) - Municipal Health Secretariat have the essential and derivative attributes. This was a cross-sectional study of random, independent samples of the service users (children and adults). Results were measured using the scores assigned to PC attributes. In the opinion of adults and children using PC services, Type A Units - Municipal Healthcare Centers and Family Clinics staffed only with Family Health Teams, performed better than Type B units. The scores for the attributes "first contact accessibility", "comprehensive service - services provided", "community orientation" and "family orientation" still need to be improved. On the other hand "coordinated care" and "continuity" are on their way to quality scores, being always rated at around 6.0 or even higher.

  11. Factors associated with self-reported discrimination against men who have sex with men in Brazil.

    PubMed

    Magno, Laio; Dourado, Inês; da Silva, Luís Augusto V; Brignol, Sandra; Brito, Ana Maria de; Guimarães, Mark Drew Crosland; Benzaken, Adele; Pinho, Adriana de A; Kendall, Carl; Kerr, Ligia Regina Franco Sansigolo

    2017-01-01

    To estimate self-reported discrimination due to sexual orientation among men who have sex with men (MSM) in Brazil and to analyze associated factors. A cross-sectional study of 3,859 MSM recruited in 2008-2009 with respondent driven sampling. Data collection conducted in health centers in 10 Brazilian cities. A face-to-face questionnaire was used and rapid HIV and syphilis tests conducted. Aggregated data were weighted and adjusted odds ratio estimated to measure the association between selected factors and self-reported discrimination due to sexual orientation. The sample was predominantly young, eight plus years of schooling, pardo (brown), single, low-income, and identified themselves as gay or homosexual. The prevalence of self-reported discrimination due to sexual orientation was 27.7% (95%CI 26.2-29.1). Discrimination was independently associated with: age < 30 years, more years of schooling, community involvement and support, history of sexual and physical violence, suicidal thoughts, and unprotected receptive anal intercourse. The prevalence of self-reported discrimination among MSM in Brazil is high. These results challenge the assumptions that MSM-specific prevention and support programs are not required or that health professionals do not need special training to address MSM needs.

  12. Aberrant executive attention in unaffected youth at familial risk for mood disorders.

    PubMed

    Belleau, Emily L; Phillips, Mary L; Birmaher, Boris; Axelson, David A; Ladouceur, Cecile D

    2013-05-01

    Aberrant attentional processes in individuals with mood disorders - bipolar disorder (BD) and major depressive disorder (MDD) - have been well documented. This study examined whether unaffected youth at familial risk for mood disorders would exhibit poor alerting, orienting, and executive attention relative to age-matched controls. A sample of youth (8-17 years old) having one parent with either BD or MDD (Mood-Risk, n=29) and youth having healthy parents (HC, n=27) completed the Attention Network Test-Short version (ANT-S), which assesses alerting, orienting, and executive attention. Relative to HCs, the Mood-Risk group had significantly slower reaction times on an index of executive attention, but no differences on indices of alerting or orienting. There were no differences between the two at-risk groups (i.e., youth with BD parent vs. youth with MDD parent) on any ANT-S measure. The current study is limited by its cross-sectional design, small sample size, and failure to control for familial environmental factors. The findings extend previous results indicating that altered executive attention may represent an endophenotype for mood disorders in at-risk youth. Copyright © 2012 Elsevier B.V. All rights reserved.

  13. Chinese American Parents’ Acculturation and Enculturation, Bicultural Management Difficulty, Depressive Symptoms, and Parenting

    PubMed Central

    Kim, Su Yeong; Shen, Yishan; Huang, Xuan; Wang, Yijie; Orozco-Lapray, Diana

    2014-01-01

    This study examined whether Chinese American parents’ acculturation and enculturation were related to parenting practices (punitive parenting, democratic child participation, and inductive reasoning) indirectly through the mediation of parents’ bicultural management difficulty and parental depressed mood. Data came from a two-wave study of Chinese American families in Northern California. Mothers and fathers were assessed when their children were in early adolescence and then again in middle adolescence (407 mothers and 381 fathers at Wave 1; 308 mothers and 281 fathers at Wave 2). For both waves, we examined cross-sectional models encompassing both direct and indirect links from parental cultural orientations to parenting practices. We also used individual fixed-effects techniques to account for selection bias in testing model relationships at Wave 2. At Wave 1, via bicultural management difficulty and depressive symptoms, American orientation was related to less punitive parenting and more inductive reasoning for both parents, and Chinese orientation was related to more punitive parenting and less inductive reasoning for fathers. The findings indicate that bicultural management difficulty and parental depressed mood are important mechanisms to be considered when studying the relation between Chinese American parents’ acculturation/enculturation and parenting. PMID:25678944

  14. Cross-Lagged Relationships between Career Aspirations and Goal Orientation in Early Adolescents

    ERIC Educational Resources Information Center

    Creed, Peter; Tilbury, Clare; Buys, Nick; Crawford, Meegan

    2011-01-01

    We surveyed 217 students (145 girls; average age = 14.6 years) on two occasions, twelve months apart, on measures of career aspirations (job aspirations, job expectations, educational aspirations) and goal orientation (learning, performance-prove, performance-avoid), and tested the causal relationship between goal orientation and aspirations. We…

  15. Mexican-Origin Youth's Cultural Orientations and Adjustment: Changes from Early to Late Adolescence

    ERIC Educational Resources Information Center

    Updegraff, Kimberly A.; Umana-Taylor, Adriana J.; McHale, Susan M.; Wheeler, Lorey A.; Perez-Brena, Norma J.

    2012-01-01

    Drawing from developmental and cultural adaptation perspectives and using a longitudinal design, this study examined: (a) mean-level changes in Mexican-origin adolescents' cultural orientations and adjustment from early to late adolescence and (b) bidirectional associations between cultural orientations and adjustment using a cross-lag panel…

  16. The 1987 Whittier Narrows, California, earthquake: A Metropolitan shock

    NASA Astrophysics Data System (ADS)

    Hauksson, Egill; Stein, Ross S.

    1989-07-01

    Just 3 hours after the Whittier Narrows earthquake struck, it became clear that a heretofore unseen geological structure was seismically active beneath metropolitan Los Angeles. Contrary to initial expectations of strike-slip or oblique-slip motion on the Whittier fault, whose north end abuts the aftershock zone, the focal mechanism of the mainshock showed pure thrust faulting on a deep gently inclined surface [Hauksson et al., 1988]. This collection of nine research reports spans the spectrum of seismological, geodetic, and geological investigations carried out as a result of the Whittier Narrows earthquake. Although unseen, the structure was not unforeseen. Namson [1987] had published a retrodeformable geologic cross section (meaning that the sedimentary strata could be restored to their original depositional position) 100 km to the west of the future earthquake epicenter in which blind, or subsurface, thrust faults were interpreted to be active beneath the folded southern Transverse Ranges. Working 25 km to the west, Hauksson [1987] had also found a surprising number of microearthquakes with thrust focal mechanisms south of the Santa Monica mountains, another clue to a subsurface system of thrust faults. Finally, Davis [1987] had presented a preliminary cross section only 18 km to the west of Whittier Narrows that identified as "fault B" the thrust that would rupture later that year. Not only was the earthquake focus and its orientation compatible with the 10-15 km depth and north dipping orientation of Davis' proposed thrust, but fault B appears to continue beneath the northern flank of the Los Angeles basin, skirting within 5 km of downtown Los Angeles, an area of dense commercial high-rise building development. These results are refined and extended by Davis et al. [this issue].

  17. A Quantitative Study of Empathy in Pakistani Medical Students: A Multicentered Approach.

    PubMed

    Tariq, Nabia; Rasheed, Tariq; Tavakol, Mohsen

    2017-10-01

    To examine the empathy level of undergraduate medical students in Pakistan. Three hypotheses are developed based on the literature review. (1) Female medical students have a higher level of empathy than do male students. (2) Empathy scores vary during the medical school years in Pakistani students. (3) Medical students interested in people-oriented specialties would score higher than the students interested in technology-oriented specialties. This is a quantitative inquiry approach using a cross-sectional design of 1453 students from 8 Pakistani medical schools, both private and state. The sample consists of 41.1% (n = 597) male students and 58.9% (n = 856) female students. Empirical data are collected using the Jefferson Scale of Physician Empathy (JSPE), a well-validated self-administered questionnaire. The mean empathy score among students is 4.77 with a standard deviation of 0.72. The results show that there is no statistically significant association between the empathy scores and gender, t(1342.36) = -0.053, P = .95). There is a statistically significant difference between the empathy scores and the years of medical school, F(14, 1448) = 4.95, P = .01. Concerning the specialty interests, there is no statistically significant difference between the empathy score and specialty interests. The findings of this study showed that in Western countries, medical students performed better than Pakistani medical students on the empathy scale. This finding has important implications for Pakistani medical educators to improve the interpersonal skills of medical students in the context of patient care. Inconsistent with our expectations and experiences, our findings do not support that female medical students scored better than their male counterparts on the empathy scale. Because of the nature of a cross-sectional study, it is impossible to argue the decline of empathy during medical school training.

  18. Thermal conductivity engineering of bulk and one-dimensional Si-Ge nanoarchitectures.

    PubMed

    Kandemir, Ali; Ozden, Ayberk; Cagin, Tahir; Sevik, Cem

    2017-01-01

    Various theoretical and experimental methods are utilized to investigate the thermal conductivity of nanostructured materials; this is a critical parameter to increase performance of thermoelectric devices. Among these methods, equilibrium molecular dynamics (EMD) is an accurate technique to predict lattice thermal conductivity. In this study, by means of systematic EMD simulations, thermal conductivity of bulk Si-Ge structures (pristine, alloy and superlattice) and their nanostructured one dimensional forms with square and circular cross-section geometries (asymmetric and symmetric) are calculated for different crystallographic directions. A comprehensive temperature analysis is evaluated for selected structures as well. The results show that one-dimensional structures are superior candidates in terms of their low lattice thermal conductivity and thermal conductivity tunability by nanostructuring, such as by diameter modulation, interface roughness, periodicity and number of interfaces. We find that thermal conductivity decreases with smaller diameters or cross section areas. Furthermore, interface roughness decreases thermal conductivity with a profound impact. Moreover, we predicted that there is a specific periodicity that gives minimum thermal conductivity in symmetric superlattice structures. The decreasing thermal conductivity is due to the reducing phonon movement in the system due to the effect of the number of interfaces that determine regimes of ballistic and wave transport phenomena. In some nanostructures, such as nanowire superlattices, thermal conductivity of the Si/Ge system can be reduced to nearly twice that of an amorphous silicon thermal conductivity. Additionally, it is found that one crystal orientation, [Formula: see text]100[Formula: see text], is better than the [Formula: see text]111[Formula: see text] crystal orientation in one-dimensional and bulk SiGe systems. Our results clearly point out the importance of lattice thermal conductivity engineering in bulk and nanostructures to produce high-performance thermoelectric materials.

  19. Reservoir characterization of Mesaverde (Campanian) bedload fluvial meanderbelt sandstones, northwestern Colorado

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Jones, J.R. Jr.

    1984-04-01

    Reservoir characterization of Mesaverde meanderbelt sandstones is used to determined directional continuity of permeable zones. A 500-m (1600 ft) wide fluvial meanderbelt in the Mesaverde Group is exposed as laterally continuous 3-10-m (10-33-ft) high sandstone cliffs north of Rangely, Colorado. Forty-eight detailed measured sections through 3 point bar complexes oriented at right angles to the long axis of deposition and 1 complex oriented parallel to deposition were prepared. Sections were tied together by detailed sketches delineating and tracing major bounding surfaces such as scours and clay drapes. These complexes contain 3 to 8 multilateral sandstone packages separated by 5-20 cmmore » (2-8 in.) interbedded siltstone and shale beds. Component facies are point bars, crevasse splays, chute bars, and floodplain/overbank deposits. Two types of lateral accretion surfaces are recognized in the point bar facies. Gently dipping lateral accretions containing fining-upward sandstone packages. Large scale trough cross-bedding at the base grades upward into ripples and plane beds. Steeply dipping lateral accretion surfaces enclose beds characterized by climbing ripple cross laminations. Bounding surfaces draped by shale lags can seal vertically stacked point bars from reservoir communication. Scoured boundaries allow communication in some stacked point bars. Crevasse splays showing climbing ripples form tongues of very fine-grained sandstone which flank point bars. Chute channels commonly cut upper point bar surfaces at their downstream end. Chute facies are upward-fining with small scale troughs and common dewatering structures. Siltstones and shales underlie the point bar complexes and completely encase the meanderbelt system. Bounding surfaces at the base of the complexes are erosional and contain large shale rip-up clasts.« less

  20. Health Philosophy of Dietitians and Its Implications for Life Satisfaction: An Exploratory Study.

    PubMed

    Grace-Farfaglia, Patricia; Pickett-Bernard, Denise; White Gorman, Andrea; Dehpahlavan, Jaleh

    2017-10-19

    Studies of health providers suggest that satisfaction with life is related to their values and sense of purpose which is best achieved when their professional role is in harmony with personal philosophy. Cross-sectional surveys suggest that personal health beliefs and practices of health professionals influence their clinical counseling practices. However, little is known about the influence of health philosophy on the personal satisfaction with life for dietitians. This study recruited a randomly selected, cross-sectional sample to complete a self-administered online survey. An exploratory factor analysis of was conducted for 479 participants resulting in a two-factor solution, clinical (α = 0.914) and wellness (α = 0.894) perceptions of health. An index score for the following valid and reliable scales were calculated: satisfaction with life, health conception, and healthy lifestyle and personal control. Pearson correlation coefficients between scores were analyzed to determine the degree of relationship. Potential mediators were explored with multiple regression. The relationships between variables were tested with structural equation modeling using a multigroup comparison between genders. The male participants were removed from the overall model and were separately evaluated. Health philosophy that is oriented toward wellness, was positively and significantly associated with life satisfaction, r (462) = 0.103, p < 0.05. Participants with higher Healthy Lifestyle and Personal Control scores reported greater life satisfaction, r (462) = 0.27, p = 0.000. Healthy lifestyle alone predicted 8.8% of the variance in life satisfaction ( R ² = 0.088, df 1462, p = 0.005). SEM confirmed the model had goodness-of-fit (χ² = 2.63, p = 0.453). The satisfaction with life of dietitians is directly and positively influenced by a greater wellness orientation and personal healthy lifestyle practices. The effect of practice and lifestyle on life satisfaction appears to be greater for men.

  1. A robust algorithm for automated target recognition using precomputed radar cross sections

    NASA Astrophysics Data System (ADS)

    Ehrman, Lisa M.; Lanterman, Aaron D.

    2004-09-01

    Passive radar is an emerging technology that offers a number of unique benefits, including covert operation. Many such systems are already capable of detecting and tracking aircraft. The goal of this work is to develop a robust algorithm for adding automated target recognition (ATR) capabilities to existing passive radar systems. In previous papers, we proposed conducting ATR by comparing the precomputed RCS of known targets to that of detected targets. To make the precomputed RCS as accurate as possible, a coordinated flight model is used to estimate aircraft orientation. Once the aircraft's position and orientation are known, it is possible to determine the incident and observed angles on the aircraft, relative to the transmitter and receiver. This makes it possible to extract the appropriate radar cross section (RCS) from our simulated database. This RCS is then scaled to account for propagation losses and the receiver's antenna gain. A Rician likelihood model compares these expected signals from different targets to the received target profile. We have previously employed Monte Carlo runs to gauge the probability of error in the ATR algorithm; however, generation of a statistically significant set of Monte Carlo runs is computationally intensive. As an alternative to Monte Carlo runs, we derive the relative entropy (also known as Kullback-Liebler distance) between two Rician distributions. Since the probability of Type II error in our hypothesis testing problem can be expressed as a function of the relative entropy via Stein's Lemma, this provides us with a computationally efficient method for determining an upper bound on our algorithm's performance. It also provides great insight into the types of classification errors we can expect from our algorithm. This paper compares the numerically approximated probability of Type II error with the results obtained from a set of Monte Carlo runs.

  2. Quality of medical service, patient satisfaction and loyalty with a focus on interpersonal-based medical service encounters and treatment effectiveness: a cross-sectional multicenter study of complementary and alternative medicine (CAM) hospitals.

    PubMed

    Kim, Chang Eun; Shin, Joon-Shik; Lee, Jinho; Lee, Yoon Jae; Kim, Me-Riong; Choi, Areum; Park, Ki Byung; Lee, Ho-Joo; Ha, In-Hyuk

    2017-03-28

    Treatment effectiveness holds considerable importance in the association between service quality and satisfaction in medical service studies. While complementary and alternative medicine (CAM) use grows more prominent, comprehensive evaluations of the quality of medical service at CAM-oriented hospitals are scarce. This study assesses the quality of medical services provided at a CAM-oriented hospital of Korean medicine using the service encounter system approach and analyzes the influence of treatment effectiveness on patient loyalty. A survey study using one-on-one interviews was conducted using a cross-sectional design in outpatients visiting one of fifteen Korean medicine facilities located throughout Korea. A total of 880 surveys were completed from June to July, 2014, and 728 surveys were included in the final analysis after excluding incomplete or incorrect questionnaires. The reliability and validity of the surveys was confirmed using Cronbach's alpha coefficient and confirmatory factor analysis, and a structural equation modeling analysis was performed to verify causality and association between factors (quality of medical service, treatment effectiveness, patient satisfaction, and intent to revisit). The measured factors of physician performance and quality of service procedures had a positive effect on treatment effectiveness. The impression of the facilities and environment directly impacted satisfaction rates for interpersonal-based medical service encounters, while treatment effectiveness positively affected satisfaction regarding quality of medical service. However, treatment effectiveness had a more significant effect on satisfaction compared to facilities and environment, and it indirectly affected satisfaction and directly influenced intent to revisit. Treatment effectiveness and satisfaction both positively influenced intent to revisit. The importance of treatment effectiveness should be recognized when examining quality of medical services, and we hope that these findings may contribute to future studies.

  3. Thermal conductivity engineering of bulk and one-dimensional Si-Ge nanoarchitectures

    PubMed Central

    Kandemir, Ali; Ozden, Ayberk; Cagin, Tahir; Sevik, Cem

    2017-01-01

    Various theoretical and experimental methods are utilized to investigate the thermal conductivity of nanostructured materials; this is a critical parameter to increase performance of thermoelectric devices. Among these methods, equilibrium molecular dynamics (EMD) is an accurate technique to predict lattice thermal conductivity. In this study, by means of systematic EMD simulations, thermal conductivity of bulk Si-Ge structures (pristine, alloy and superlattice) and their nanostructured one dimensional forms with square and circular cross-section geometries (asymmetric and symmetric) are calculated for different crystallographic directions. A comprehensive temperature analysis is evaluated for selected structures as well. The results show that one-dimensional structures are superior candidates in terms of their low lattice thermal conductivity and thermal conductivity tunability by nanostructuring, such as by diameter modulation, interface roughness, periodicity and number of interfaces. We find that thermal conductivity decreases with smaller diameters or cross section areas. Furthermore, interface roughness decreases thermal conductivity with a profound impact. Moreover, we predicted that there is a specific periodicity that gives minimum thermal conductivity in symmetric superlattice structures. The decreasing thermal conductivity is due to the reducing phonon movement in the system due to the effect of the number of interfaces that determine regimes of ballistic and wave transport phenomena. In some nanostructures, such as nanowire superlattices, thermal conductivity of the Si/Ge system can be reduced to nearly twice that of an amorphous silicon thermal conductivity. Additionally, it is found that one crystal orientation, <100>, is better than the <111> crystal orientation in one-dimensional and bulk SiGe systems. Our results clearly point out the importance of lattice thermal conductivity engineering in bulk and nanostructures to produce high-performance thermoelectric materials. PMID:28469733

  4. Effect of Geometry on Electrokinetic Characterization of Solid Surfaces.

    PubMed

    Kumar, Abhijeet; Kleinen, Jochen; Venzmer, Joachim; Gambaryan-Roisman, Tatiana

    2017-08-01

    An analytical approach is presented to describe pressure-driven streaming current (I str ) and streaming potential (U str ) generation in geometrically complex samples, for which the classical Helmholtz-Smoluchowski (H-S) equation is known to be inaccurate. The new approach is valid under the same prerequisite conditions that are used for the development of the H-S equation, that is, the electrical double layers (EDLs) are sufficiently thin and surface conductivity and electroviscous effects are negligible. The analytical methodology is developed using linear velocity profiles to describe liquid flow inside of EDLs and using simplifying approximations to describe macroscopic flow. At first, a general expression is obtained to describe the I str generated in different cross sections of an arbitrarily shaped sample. Thereafter, assuming that the generated U str varies only along the pressure-gradient direction, an expression describing the variation of generated U str along the sample length is obtained. These expressions describing I str and U str generation constitute the theoretical foundation of this work, which is first applied to a set of three nonuniform cross-sectional capillaries and thereafter to a square array of cylindrical fibers (model porous media) for both parallel and transverse fiber orientation cases. Although analytical solutions cannot be obtained for real porous substrates because of their random structure, the new theory provides useful insights into the effect of important factors such as fiber orientation, sample porosity, and sample dimensions. The solutions obtained for the model porous media are used to device strategies for more accurate zeta potential determination of porous fiber plugs. The new approach could be thus useful in resolving the long-standing problem of sample geometry dependence of zeta potential measurements.

  5. Nematic director reorientation at solid and liquid interfaces under flow: SAXS studies in a microfluidic device

    DOE PAGES

    Silva, Bruno F. B.; Zepeda-Rosales, Miguel; Venkateswaran, Neeraja; ...

    2014-10-30

    In this work we investigate the interplay between flow and boundary condition effects on the orientation field of a thermotropic nematic liquid crystal under flow and confinement in a microfluidic device. Two types of experiments were performed using synchrotron small-angle X-ray-scattering (SAXS). In the first, a nematic liquid crystal flows through a square-channel cross section at varying flow rates, while the nematic director orientation projected onto the velocity/velocity gradient plane is measured using a 2D detector. At moderate-to-high flow rates, the nematic director is predominantly aligned in the flow direction, but with a small tilt angle of ~±11° in themore » velocity gradient direction. The director tilt angle is constant throughout most of the channel width but switches sign when crossing the center of the channel, in agreement with the Ericksen–Leslie–Parodi (ELP) theory. At low flow rates, boundary conditions begin to dominate, and a flow profile resembling the escaped radial director configuration is observed, where the director is seen to vary more smoothly from the edges (with homeotropic alignment) to the center of the channel. In the second experiment, hydrodynamic focusing is employed to confine the nematic phase into a sheet of liquid sandwiched between two layers of Triton X-100 aqueous solutions. The average nematic director orientation shifts to some extent from the flow direction toward the liquid boundaries, although it remains unclear if one tilt angle is dominant through most of the nematic sheet (with abrupt jumps near the boundaries) or if the tilt angle varies smoothly between two extreme values (~90 and 0°). Lastly, the technique presented here could be applied to perform high-throughput measurements for assessing the influence of different surfactants on the orientation of nematic phases and may lead to further improvements in areas such as boundary lubrication and clarifying the nature of defect structures in LC displays.« less

  6. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Silva, Bruno F. B.; Zepeda-Rosales, Miguel; Venkateswaran, Neeraja

    In this work we investigate the interplay between flow and boundary condition effects on the orientation field of a thermotropic nematic liquid crystal under flow and confinement in a microfluidic device. Two types of experiments were performed using synchrotron small-angle X-ray-scattering (SAXS). In the first, a nematic liquid crystal flows through a square-channel cross section at varying flow rates, while the nematic director orientation projected onto the velocity/velocity gradient plane is measured using a 2D detector. At moderate-to-high flow rates, the nematic director is predominantly aligned in the flow direction, but with a small tilt angle of ~±11° in themore » velocity gradient direction. The director tilt angle is constant throughout most of the channel width but switches sign when crossing the center of the channel, in agreement with the Ericksen–Leslie–Parodi (ELP) theory. At low flow rates, boundary conditions begin to dominate, and a flow profile resembling the escaped radial director configuration is observed, where the director is seen to vary more smoothly from the edges (with homeotropic alignment) to the center of the channel. In the second experiment, hydrodynamic focusing is employed to confine the nematic phase into a sheet of liquid sandwiched between two layers of Triton X-100 aqueous solutions. The average nematic director orientation shifts to some extent from the flow direction toward the liquid boundaries, although it remains unclear if one tilt angle is dominant through most of the nematic sheet (with abrupt jumps near the boundaries) or if the tilt angle varies smoothly between two extreme values (~90 and 0°). Lastly, the technique presented here could be applied to perform high-throughput measurements for assessing the influence of different surfactants on the orientation of nematic phases and may lead to further improvements in areas such as boundary lubrication and clarifying the nature of defect structures in LC displays.« less

  7. Help to perpetuate traditional gender roles: Benevolent sexism increases engagement in dependency-oriented cross-gender helping.

    PubMed

    Shnabel, Nurit; Bar-Anan, Yoav; Kende, Anna; Bareket, Orly; Lazar, Yael

    2016-01-01

    Based on theorizing that helping relations may serve as a subtle mechanism to reinforce intergroup inequality, the present research (N = 1,315) examined the relation between benevolent sexism (i.e., a chivalrous yet subtly oppressive view of women) and helping. In cross-gender interactions, the endorsement of (Studies 1, 3, and 4) or exposure to (Study 2) benevolent sexism predicted (a) men's preference to provide women with dependency-oriented help (i.e., direct assistance) rather than tools for autonomous coping, and (b) women's preference to seek dependency-oriented help rather than tools for autonomous coping. Benevolent sexism did not predict men's and women's engagement in dependency-oriented helping relations in same-gender interactions. Studies 1 and 2 examined behavioral intentions in response to a series of hypothetical scenarios; Studies 3 and 4 examined actual behavior in tests of mathematical and logical ability, and pointed to assumed partner's expectations as a potential mediator. The converging evidence supports the hypothesis that benevolent sexism encourages engagement in cross-gender helping relations that perpetuate traditional gender roles. (c) 2016 APA, all rights reserved).

  8. Publications about Products - Naval Oceanography Portal

    Science.gov Websites

    section Advanced Search... Sections Home Time Earth Orientation Astronomy Meteorology Oceanography Ice You are here: Home › USNO › Earth Orientation › Publications about Products USNO Logo USNO Navigation Earth Orientation Products GPS-based Products VLBI-based Products EO Information Center

  9. VLBI-based Products - Naval Oceanography Portal

    Science.gov Websites

    section Advanced Search... Sections Home Time Earth Orientation Astronomy Meteorology Oceanography Ice You terrestrial reference frames and to predict the variable orientation of the Earth in three-dimensional space antennas that define a VLBI-based Terrestrial Reference Frame (TRF) and the Earth Orientation Parameters

  10. The evolutionary stability of cross-sex, cross-trait genetic covariances.

    PubMed

    Gosden, Thomas P; Chenoweth, Stephen F

    2014-06-01

    Although knowledge of the selective agents behind the evolution of sexual dimorphism has advanced considerably in recent years, we still lack a clear understanding of the evolutionary durability of cross-sex genetic covariances that often constrain its evolution. We tested the relative stability of cross-sex genetic covariances for a suite of homologous contact pheromones of the fruit fly Drosophila serrata, along a latitudinal gradient where these traits have diverged in mean. Using a Bayesian framework, which allowed us to account for uncertainty in all parameter estimates, we compared divergence in the total amount and orientation of genetic variance across populations, finding divergence in orientation but not total variance. We then statistically compared orientation divergence of within-sex (G) to cross-sex (B) covariance matrices. In line with a previous theoretical prediction, we find that the cross-sex covariance matrix, B, is more variable than either within-sex G matrix. Decomposition of B matrices into their symmetrical and nonsymmetrical components revealed that instability is linked to the degree of asymmetry. We also find that the degree of asymmetry correlates with latitude suggesting a role for spatially varying natural selection in shaping genetic constraints on the evolution of sexual dimorphism. © 2014 The Author(s). Evolution © 2014 The Society for the Study of Evolution.

  11. Anisotropic Dye Adsorption and Anhydrous Proton Conductivity in Smectic Liquid Crystal Networks: The Role of Cross-Link Density, Order, and Orientation.

    PubMed

    Liang, Ting; van Kuringen, Huub P C; Mulder, Dirk J; Tan, Shuai; Wu, Yong; Borneman, Zandrie; Nijmeijer, Kitty; Schenning, Albertus P H J

    2017-10-11

    In this work, the decisive role of rigidity, orientation, and order in the smectic liquid crystalline network on the anisotropic proton and adsorbent properties is reported. The rigidity in the hydrogen-bonded polymer network has been altered by changing the cross-link density, the order by using different mesophases (smectic, nematic, and isotropic phases), whereas the orientation of the mesogens was controlled by alignment layers. Adding more cross-linkers improved the integrity of the polymer films. For the proton conduction, an optimum was found in the amount of cross-linker and the smectic organization results in the highest anhydrous proton conduction. The polymer films show anisotropic proton conductivity with a 54 times higher conductivity in the direction perpendicular to the molecular director. After a base treatment of the smectic liquid crystalline network, a nanoporous polymer film is obtained that also shows anisotropic adsorption of dye molecules and again straight smectic pores are favored over disordered pores in nematic and isotropic networks. The highly cross-linked films show size-selective adsorption of dyes. Low cross-linked materials do not show this difference due to swelling, which decreases the order and creates openings in the two-dimensional polymer layers. The latter is, however, beneficial for fast adsorption kinetics.

  12. Outstanding compressive creep strength in Cr/Ir-codoped (Mo0.85Nb0.15)Si2 crystals with the unique cross-lamellar microstructure.

    PubMed

    Hagihara, Koji; Ikenishi, Takaaki; Araki, Haruka; Nakano, Takayoshi

    2017-06-21

    A (Mo 0.85 Nb 0.15 )Si 2 crystal with an oriented, lamellar, C40/C11 b two-phase microstructure is a promising ultrahigh-temperature (UHT) structural material, but its low room-temperature fracture toughness and low high-temperature strength prevent its practical application. As a possibility to overcome these problems, we first found a development of unique "cross-lamellar microstructure", by the cooping of Cr and Ir. The cross-lamellar microstructure consists of a rod-like C11 b -phase grains that extend along a direction perpendicular to the lamellar interface in addition to the C40/C11 b fine lamellae. In this study, the effectiveness of the cross-lamellar microstructure for improving the high-temperature creep deformation property, being the most essential for UHT materials, was examined by using the oriented crystals. The creep rate significantly reduced along a loading orientation parallel to the lamellar interface. Furthermore, the degradation in creep strength for other loading orientation that is not parallel to the lamellar interface, which has been a serious problem up to now, was also suppressed. The results demonstrated that the simultaneous improvement of high-temperature creep strength and room temperature fracture toughness can be first accomplished by the development of unique cross-lamellar microstructure, which opens a potential avenue for the development of novel UHT materials as alternatives to existing Ni-based superalloys.

  13. Fitting and Reconstruction of Thirteen Simple Coronal Mass Ejections

    NASA Astrophysics Data System (ADS)

    Al-Haddad, Nada; Nieves-Chinchilla, Teresa; Savani, Neel P.; Lugaz, Noé; Roussev, Ilia I.

    2018-05-01

    Coronal mass ejections (CMEs) are the main drivers of geomagnetic disturbances, but the effects of their interaction with Earth's magnetic field depend on their magnetic configuration and orientation. Fitting and reconstruction techniques have been developed to determine important geometrical and physical CME properties, such as the orientation of the CME axis, the CME size, and its magnetic flux. In many instances, there is disagreement between different methods but also between fitting from in situ measurements and reconstruction based on remote imaging. This could be due to the geometrical or physical assumptions of the models, but also to the fact that the magnetic field inside CMEs is only measured at one point in space as the CME passes over a spacecraft. In this article we compare three methods that are based on different assumptions for measurements by the Wind spacecraft for 13 CMEs from 1997 to 2015. These CMEs are selected from the interplanetary coronal mass ejections catalog on https://wind.nasa.gov/ICMEindex.php because of their simplicity in terms of: 1) slow expansion speed throughout the CME and 2) weak asymmetry in the magnetic field profile. This makes these 13 events ideal candidates for comparing codes that do not include expansion or distortion. We find that for these simple events, the codes are in relatively good agreement in terms of the CME axis orientation for six of the 13 events. Using the Grad-Shafranov technique, we can determine the shape of the cross-section, which is assumed to be circular for the other two models, a force-free fitting and a circular-cylindrical non force-free fitting. Five of the events are found to have a clear circular cross-section, even when this is not a precondition of the reconstruction. We make an initial attempt at evaluating the adequacy of the different assumptions for these simple CMEs. The conclusion of this work strongly suggests that attempts at reconciling in situ and remote-sensing views of CMEs must take into consideration the compatibility of the different models with specific CME structures to better reproduce flux ropes.

  14. Acculturation does not necessarily lead to increased physical activity during leisure time: a cross-sectional study among Turkish young people in the Netherlands.

    PubMed

    Hosper, Karen; Klazinga, Niek S; Stronks, Karien

    2007-09-03

    Non-Western migrant populations living in Western countries are more likely to be physically inactive during leisure time than host populations. It is argued that this difference will disappear as they acculturate to the culture of the host country. We explored whether this is also true for migrants who experience contextual barriers such as having children, living in a less attractive neighbourhood, or having occupational physical activity. Cross-sectional data were obtained from the LASER-study (2003-2004) on health related behaviours in first and second generation Turkish young people living in the Netherlands. For this study we included 485 Turkish participants aged 15-30 years, who participated in a structured interview during a home visit. Acculturation was indicated by level of 'cultural orientation towards the Dutch culture' and 'social contacts with ethnic Dutch' with persons being low oriented towards the Dutch culture and having few social contacts with ethnic Dutch as reference group. The measured barriers were 'having children', 'occupational physical activity' and 'living in a less attractive neighbourhood'. Logistic regression analyses were used to assess the associations between acculturation and physical activity during leisure time, stratified by these contextual barriers. Greater cultural and social integration was associated with increased physical activity during leisure time. Odds ratio's were 1.85 (CI: 1.19-2.85) for 'cultural orientation' and 1.77 (CI: 1.15-2.71) for 'social contacts with ethnic Dutch'. However, these associations were not present or less strong among people who had children, or who were living in a less attractive neighbourhood or who engaged in occupational physical activity. Physical activity during leisure time increased with greater acculturation, however, this relationship was found only among participants without children, living in a attractive neighbourhood and having no occupational activity. Interventions aimed at migrant populations should not only focus on the least integrated. Instead, effectiveness might be enhanced when interventions are sensitive to the contextual barriers that might inhibit physical activity behaviours during leisure time.

  15. Attitude towards working in rural areas: a cross-sectional survey of rural-oriented tuition-waived medical students in Shaanxi, China.

    PubMed

    Liu, Jinlin; Zhang, Kun; Mao, Ying

    2018-05-02

    Attracting and recruiting health workers to work in rural areas is still a great challenge in China. The rural-oriented tuition-waived medical education (RTME) programme has been initiated and implemented in China since 2010. This study aimed to examine the attitudes of rural-oriented tuition-waived medical students (RTMSs) in Shaanxi towards working in rural areas and the related influencing factors. A cross-sectional survey was conducted in 2015 among 232 RTMSs in two medical universities from the first group of students enrolled in the RTME programme in Shaanxi. Descriptive and analytical statistics were used for the data analyses. Of the 230 valid responses, 92.6% expressed their intentions of breaking the contract for working in rural township hospitals for 6 years after their graduation under the RTME programme. After the contract expired, only 1.3% intended to remain in the rural areas, 66.5% had no intention of remaining, and 32.2% were unsure. The factors related to a positive attitude among the RTMSs towards working in rural areas (no intention of breaking the contract) included being female, having a mother educated at the level of primary school or below, having a good understanding of the policy, having a good cognition of the value of rural medical work, and being satisfied with the policy. The factors related to a positive attitude of the RTMSs towards remaining in rural areas included being female, having a rural origin, having no regular family monthly income, having a father whose occupation was farmer, having a mother educated at the level of postsecondary or above, having the RTMSs be the final arbiter of the policy choice, having a good understanding of the policy, having a good cognition of the value of rural medical work, and being satisfied with the educational scheme. Related policy makers and health workforce managers may benefit from the findings of this study. Appropriate strategies should be implemented to stimulate the RTMSs' intrinsic motivation and improve their willingness to work in rural areas and to better achieve the objectives of RTME policy. Meanwhile, measures to increase the retention of RTMSs should also be advanced.

  16. Acculturation does not necessarily lead to increased physical activity during leisure time: a cross-sectional study among Turkish young people in the Netherlands

    PubMed Central

    Hosper, Karen; Klazinga, Niek S; Stronks, Karien

    2007-01-01

    Background Non-Western migrant populations living in Western countries are more likely to be physically inactive during leisure time than host populations. It is argued that this difference will disappear as they acculturate to the culture of the host country. We explored whether this is also true for migrants who experience contextual barriers such as having children, living in a less attractive neighbourhood, or having occupational physical activity. Methods Cross-sectional data were obtained from the LASER-study (2003–2004) on health related behaviours in first and second generation Turkish young people living in the Netherlands. For this study we included 485 Turkish participants aged 15–30 years, who participated in a structured interview during a home visit. Acculturation was indicated by level of 'cultural orientation towards the Dutch culture' and 'social contacts with ethnic Dutch' with persons being low oriented towards the Dutch culture and having few social contacts with ethnic Dutch as reference group. The measured barriers were 'having children', 'occupational physical activity' and 'living in a less attractive neighbourhood'. Logistic regression analyses were used to assess the associations between acculturation and physical activity during leisure time, stratified by these contextual barriers. Results Greater cultural and social integration was associated with increased physical activity during leisure time. Odds ratio's were 1.85 (CI: 1.19–2.85) for 'cultural orientation' and 1.77 (CI: 1.15–2.71) for 'social contacts with ethnic Dutch'. However, these associations were not present or less strong among people who had children, or who were living in a less attractive neighbourhood or who engaged in occupational physical activity. Conclusion Physical activity during leisure time increased with greater acculturation, however, this relationship was found only among participants without children, living in a attractive neighbourhood and having no occupational activity. Interventions aimed at migrant populations should not only focus on the least integrated. Instead, effectiveness might be enhanced when interventions are sensitive to the contextual barriers that might inhibit physical activity behaviours during leisure time. PMID:17767715

  17. Cellulose microfibril orientation of Picea abies and its variability at the micron-level determined by Raman imaging

    PubMed Central

    Gierlinger, Notburga; Luss, Saskia; König, Christian; Konnerth, Johannes; Eder, Michaela; Fratzl, Peter

    2010-01-01

    The functional characteristics of plant cell walls depend on the composition of the cell wall polymers, as well as on their highly ordered architecture at scales from a few nanometres to several microns. Raman spectra of wood acquired with linear polarized laser light include information about polymer composition as well as the alignment of cellulose microfibrils with respect to the fibre axis (microfibril angle). By changing the laser polarization direction in 3° steps, the dependency between cellulose and laser orientation direction was investigated. Orientation-dependent changes of band height ratios and spectra were described by quadratic linear regression and partial least square regressions, respectively. Using the models and regressions with high coefficients of determination (R2 > 0.99) microfibril orientation was predicted in the S1 and S2 layers distinguished by the Raman imaging approach in cross-sections of spruce normal, opposite, and compression wood. The determined microfibril angle (MFA) in the different S2 layers ranged from 0° to 49.9° and was in coincidence with X-ray diffraction determination. With the prerequisite of geometric sample and laser alignment, exact MFA prediction can complete the picture of the chemical cell wall design gained by the Raman imaging approach at the micron level in all plant tissues. PMID:20007198

  18. To have or to learn? The effects of materialism on British and Chinese children's learning.

    PubMed

    Ku, Lisbeth; Dittmar, Helga; Banerjee, Robin

    2014-05-01

    This article presents a systematic attempt to examine the associations of materialism with learning in 9- to 11-year-old children in 2 countries of similar economic development but different cultural heritage. Using cross-sectional, longitudinal, and experimental methods, we test a theoretically driven model of associations among materialism, learning motivations, and learning outcomes. Convergent findings suggest that a materialist orientation in elementary school children lowers intrinsic learning motivations, fosters extrinsic learning motivations, and leads to poorer learning outcomes. Materialism was linked directly to lower exam performance, and this link was mediated by lower mastery and heightened performance goals, with patterns not differing between British and Hong Kong Chinese children (Study 1). A follow-up showed that initial materialism predicted worse exam grades 1 year later, suggesting a detrimental long-term effect on Chinese children's school performance (Study 2). We then tested relationships between materialism and learning experimentally, by priming a momentary (state) orientation toward materialism. Writing about material possessions and money affected Chinese children's learning motivations, so that they endorsed lower mastery and higher performance goals (Study 3). A video-diary materialism prime had significant effects on actual learning behaviors, leading British children to (a) choose a performance-oriented learning task over a mastery-oriented task and (b) give up on the task more quickly (Study 4). This research has important implications for personality psychology, educational policy, and future research.

  19. Discrimination and externalizing problems among Moroccan- and Romanian-origin early adolescents in Italy: Moderating role of cultural orientations and impulse control.

    PubMed

    Miconi, Diana; Altoè, Gianmarco; Salcuni, Silvia; Di Riso, Daniela; Schiff, Sami; Moscardino, Ughetta

    2018-05-24

    Although discrimination is a common stressor in the everyday life of immigrant youth, individuals are not equally susceptible to its adverse effects. This cross-sectional study aimed to examine whether cultural orientation preferences and impulse control (IC) moderate the association between perceived discrimination and externalizing problems among Moroccan- and Romanian-origin early adolescents in Italy. The sample included 126 Moroccan and 126 Romanian youths (46% girls, 42% first-generation) aged 11-13 years and their parents. Perceived discrimination and cultural orientations were assessed using self-report questionnaires, while IC was evaluated via a computerized version of the Iowa Gambling Task. Externalizing behaviors were assessed via parental report. Cluster analysis identified separated, assimilated, and integrated early adolescents. Regression analyses revealed that when facing discrimination, youths who endorsed separation and exhibited low levels of IC were more vulnerable to externalizing problems. In contrast, among assimilated adolescents the discrimination-externalizing difficulties link was significant at high levels of IC. Furthermore, low levels of IC were associated with more externalizing problems for Romanian, but not for Moroccan early adolescents. Findings underscore the need to consider both cultural orientation processes and early adolescents' ability to control their impulses when developing interventions aimed to reduce discrimination-related problem behaviors in immigrant youth. Implications for theory and practice are discussed. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

  20. Controlling compositional homogeneity and crystalline orientation in Bi 0.8 Sb 0.2 thermoelectric thin films [Control of composition and crystallinity in Bi 0.8Sb 0.2 thermoelectric thin films].

    DOE PAGES

    Rochford, C.; Medlin, D. L.; Erickson, K. J.; ...

    2015-12-01

    Controlling alloy composition, crystalline quality, and crystal orientation is necessary to achieve high thermoelectric performance in Bi 1-xSb x thin films. These microstructural attributes are demonstrated in this letter via co-sputter deposition of Bi and Sb metals on Si/SiO 2 substrates followed by ex-situ post anneals ranging from 200 – 300 °C in forming gas with rapid cooling to achieve orientation along the trigonal axis. We show with cross-sectional transmission electron microscopy and energy-dispersive X-ray spectrometry that 50 – 95% of the Sb segregates at the surface upon exposure to air during transfer. This then forms a nanocrystalline Sb 2Omore » 3 layer upon annealing, leaving the bulk of the film primarily Bi metal which is a poor thermoelectric material. We demonstrate a SiN capping technique to eliminate Sb segregation and preserve a uniform composition throughout the thickness of the film. Given that the Bi 1-xSb x solid solution melting point depends on the Sb content, the SiN cap allows one to carefully approach but not exceed the melting point during annealing. This leads to the strong orientation along the trigonal axis and high crystalline quality desired for thermoelectric applications.« less

  1. Effects of tool handle dimension and workpiece orientation and size on wrist ulnar/radial torque strength, usability and discomfort in a wrench task.

    PubMed

    Dianat, Iman; Rahimi, Soleyman; Nedaei, Moein; Asghari Jafarabadi, Mohammad; Oskouei, Ali E

    2017-03-01

    The effects of tool handle dimension (three modified designs of wrenches with 30-50 mm diameter cylindrical handles and traditional design with rectangular cross-sectional (5 mm × 25 mm) handle), workpiece orientation (vertical/horizontal) and workpiece size (small/large) as well as user's hand size on wrist ulnar/radial (U/R) torque strength, usability and discomfort, and also the relationship between these variables were evaluated in a maximum torque task using wrenches. The highest and lowest levels of maximal wrist U/R torque strength were recorded for the 30 mm diameter handle and traditional wrench design, respectively. The prototype handle with 30 mm diameter, together with 40 mm diameter handle, was also better than other designs as they received higher usability ratings and caused less discomfort. The mean wrist torque strength exerted on a vertically oriented workpiece (in the sagittal plane) was 23.8% higher than that exerted on a horizontally oriented one (in the transverse plane). The user's hand size had no effect on torque exertions. The wrist torque strength and usability were negatively correlated with hand and finger discomfort ratings. The results are also discussed in terms of their implications for hand tool and workstation configuration in torque tasks involving wrenches. Copyright © 2016 Elsevier Ltd. All rights reserved.

  2. Demographics, behavior problems, and psychosexual characteristics of adolescents with gender identity disorder or transvestic fetishism.

    PubMed

    Zucker, Kenneth J; Bradley, Susan J; Owen-Anderson, Allison; Kibblewhite, Sarah J; Wood, Hayley; Singh, Devita; Choi, Kathryn

    2012-01-01

    This study provided a descriptive and quantitative comparative analysis of data from an assessment protocol for adolescents referred clinically for gender identity disorder (n = 192; 105 boys, 87 girls) or transvestic fetishism (n = 137, all boys). The protocol included information on demographics, behavior problems, and psychosexual measures. Gender identity disorder and transvestic fetishism youth had high rates of general behavior problems and poor peer relations. On the psychosexual measures, gender identity disorder patients had considerably greater cross-gender behavior and gender dysphoria than did transvestic fetishism youth and other control youth. Male gender identity disorder patients classified as having a nonhomosexual sexual orientation (in relation to birth sex) reported more indicators of transvestic fetishism than did male gender identity disorder patients classified as having a homosexual sexual orientation (in relation to birth sex). The percentage of transvestic fetishism youth and male gender identity disorder patients with a nonhomosexual sexual orientation self-reported similar degrees of behaviors pertaining to transvestic fetishism. Last, male and female gender identity disorder patients with a homosexual sexual orientation had more recalled cross-gender behavior during childhood and more concurrent cross-gender behavior and gender dysphoria than did patients with a nonhomosexual sexual orientation. The authors discuss the clinical utility of their assessment protocol.

  3. Cross-Sectional Imaging of Boundary Lubrication Layer Formed by Fatty Acid by Means of Frequency-Modulation Atomic Force Microscopy.

    PubMed

    Hirayama, Tomoko; Kawamura, Ryota; Fujino, Keita; Matsuoka, Takashi; Komiya, Hiroshi; Onishi, Hiroshi

    2017-10-10

    To observe in situ the adsorption of fatty acid onto metal surfaces, cross-sectional images of the adsorption layer were acquired by frequency-modulation atomic force microscopy (FM-AFM). Hexadecane and palmitic acid were used as the base oil and typical fatty acid, respectively. A Cu-coated silicon wafer was prepared as the target substrate. The solvation structure formed by hexadecane molecules at the interface between the Cu substrate and the hexadecane was observed, and the layer pitch was found to be about 0.6 nm, which corresponds to the height of hexadecane molecules. This demonstrates that hexadecane molecules physically adsorbed onto the surface due to van der Waals forces with lying orientation because hexadecane is a nonpolar hydrocarbon. When hexadecane with palmitic acid was put on the Cu substrate instead of pure hexadecane, an adsorption layer of palmitic acid was observed at the interface. The layer pitch was about 2.5-2.8 nm, which matches the chain length of palmitic acid molecules well. This indicates that the original adsorption layer was monolayer or single bilayer in the local area. In addition, a cross-sectional image captured 1 h after observation started to reveal that the adsorbed additive layer gradually grew up to be thicker than about 20 nm due to an external stimulus, such as cantilever oscillation. This is the first report of in situ observation of an adsorbed layer by FM-AFM in the tribology field and demonstrates that FM-AFM is useful for clarifying the actual boundary lubrication mechanism.

  4. Estimation of Mars radar backscatter from measured surface rock populations

    USGS Publications Warehouse

    Baron, J.E.; Simpson, R.A.; Tyler, G.L.; Moore, H.J.; Harmon, J.K.

    1998-01-01

    Reanalysis of rock population data at the Mars Viking Lander sites has yielded updated values of rock fractional surface coverage (about 0.16 at both sites, including outcrops) and new estimates of rock burial depths and axial ratios. These data are combined with a finite difference time domain (FDTD) numerical scattering model to estimate diffuse backscatter due to rocks at both the Lander l (VL1) and Lander 2 (VL2) sites. We consider single scattering from both surface and subsurface objects of various shapes, ranging from an ideal sphere to an accurate digitized model of a terrestrial rock. The FDTD cross-section calculations explicitly account for the size, shape, composition, orientation, and burial state of the scattering object, the incident wave angle and polarization, and the composition of the surface. We calculate depolarized specific cross sections at 12.6 cm wavelength due to lossless rock-like scatterers of about 0.014 at VL1 and 0.023 at VL2, which are comparable to the measured ranges of 0.019-0.032 and 0.012-0.018, respectively. We also discuss the variation of the diffuse cross section as the local angle of incidence, ??i, changes. Numerical calculations for a limited set of rock shapes indicate a marked difference between the angular backscattering behavior of wavelength-scale surface and subsurface rocks: while subsurface rocks scatter approximately as a cosine power law, surface rocks display a complex variation, often with peak backscattering at high incidence angles (??i = 70??-75??). Copyright 1998 by the American Geophysical Union.

  5. Localization and pattern of graviresponse across the pulvinus of barley Hordeum vulgare

    NASA Technical Reports Server (NTRS)

    Brock, T. G.; Lu, C. R.; Ghosheh, N. S.; Kaufman, P. B.

    1989-01-01

    Pulvini of excised stem segments from barley (Hordeum vulgare cv Larker') were pretreated with 1 millimolar coumarin before gravistimulation to reduce longitudinal cell expansion and exaggerate radial cell enlargement. The cellular localization and pattern of graviresponse across individual pulvini were then evaluated by cutting the organ in cross-section, photographing the cross-section, and then measuring pulvinus thickness and the radial width of cortical and epidermal cells in enlargements of the photomicrographs. With respect to orientation during gravistimulation, we designated the uppermost point of the cross-section 0 degrees and the lowermost point 180 degrees. A gravity-induced increase in pulvinus thickness was observable within 40 degrees of the vertical in coumarin-treated pulvini. In upper halves of coumarin-treated gravistimulated pulvini, cells in the inner cortex and inner epidermis had increased radial widths, relative to untreated gravistimulated pulvini. In lower halves of coumarin-treated pulvini, cells in the central and outer cortex and in the outer epidermis showed the greatest increase in radial width. Cells comprising the vascular bundles also increased in radial width, with this pattern following that of the central cortex. These results indicate (a) that all cell types are capable of showing a graviresponse, (b) that the graviresponse occurs in both the top and the bottom of the responding organ, and (c) that the magnitude of the response increases approximately linearly from the uppermost point to the lowermost. These results are also consistent with models of gravitropism that link the pattern and magnitude of the graviresponse to graviperception via statolith sedimentation.

  6. Comparison of the extent and pattern of cognitive impairment among predialysis, dialysis and transplant patients: A cross-sectional study from Australia.

    PubMed

    Lambert, Kelly; Mullan, Judy; Mansfield, Kylie; Lonergan, Maureen

    2017-11-01

    The aim of this study was to compare the extent of cogntive impairment and the types of cognitive deficits in an Australian cohort of four patient groups with end stage kidney disease. Characteristics predicting the presence of cognitive impairment were also evaluated. Observational cross-sectional study of 155 patients with end stage kidney disease are recruited from a regional Australian renal unit. Eligible participants included those whose estimated Glomerular Filtration Rate was < 30 ml/min per 1.73 m 2 , were undertaking peritoneal or haemodialysis, or had received a kidney transplant. The Montreal Cognitive Assessment tool was used to screen the study participants for cognitive impairment and evaluate cognitive deficits. Cognitive impairment was defined as a total Montreal Cognitive Assessment tool score ≤24/30. The extent of cognitive impairment varied between the four groups with end stage kidney disease. Factors predicting the presence of cognitive impairment included undertaking dialysis, age ≥65, male gender and the presence of diabetes or cerebrovascular disease. Deficits in executive function, attention, language, visuospatial skills, memory and orientation were common among the study participants, and the extent of these deficits varied between groups. Limitations to the study included the cross-sectional design, and that the presence of confounders like depression were not recorded. The impact of disparities in the cognitive capabilities identified in this study are likely to be far reaching. Tailoring of education and self-management programmes to the cognitive deficits of individuals is required. © 2016 Asian Pacific Society of Nephrology.

  7. Three-dimensional retinal imaging with high-speed ultrahigh-resolution optical coherence tomography.

    PubMed

    Wojtkowski, Maciej; Srinivasan, Vivek; Fujimoto, James G; Ko, Tony; Schuman, Joel S; Kowalczyk, Andrzej; Duker, Jay S

    2005-10-01

    To demonstrate high-speed, ultrahigh-resolution, 3-dimensional optical coherence tomography (3D OCT) and new protocols for retinal imaging. Ultrahigh-resolution OCT using broadband light sources achieves axial image resolutions of approximately 2 microm compared with standard 10-microm-resolution OCT current commercial instruments. High-speed OCT using spectral/Fourier domain detection enables dramatic increases in imaging speeds. Three-dimensional OCT retinal imaging is performed in normal human subjects using high-speed ultrahigh-resolution OCT. Three-dimensional OCT data of the macula and optic disc are acquired using a dense raster scan pattern. New processing and display methods for generating virtual OCT fundus images; cross-sectional OCT images with arbitrary orientations; quantitative maps of retinal, nerve fiber layer, and other intraretinal layer thicknesses; and optic nerve head topographic parameters are demonstrated. Three-dimensional OCT imaging enables new imaging protocols that improve visualization and mapping of retinal microstructure. An OCT fundus image can be generated directly from the 3D OCT data, which enables precise and repeatable registration of cross-sectional OCT images and thickness maps with fundus features. Optical coherence tomography images with arbitrary orientations, such as circumpapillary scans, can be generated from 3D OCT data. Mapping of total retinal thickness and thicknesses of the nerve fiber layer, photoreceptor layer, and other intraretinal layers is demonstrated. Measurement of optic nerve head topography and disc parameters is also possible. Three-dimensional OCT enables measurements that are similar to those of standard instruments, including the StratusOCT, GDx, HRT, and RTA. Three-dimensional OCT imaging can be performed using high-speed ultrahigh-resolution OCT. Three-dimensional OCT provides comprehensive visualization and mapping of retinal microstructures. The high data acquisition speeds enable high-density data sets with large numbers of transverse positions on the retina, which reduces the possibility of missing focal pathologies. In addition to providing image information such as OCT cross-sectional images, OCT fundus images, and 3D rendering, quantitative measurement and mapping of intraretinal layer thickness and topographic features of the optic disc are possible. We hope that 3D OCT imaging may help to elucidate the structural changes associated with retinal disease as well as improve early diagnosis and monitoring of disease progression and response to treatment.

  8. Cross-Shear in Metal-on-Polyethylene Articulation of Orthopaedic Implants and its Relationship to Wear

    PubMed Central

    Schwenke, T.; Wimmer, M. A.

    2013-01-01

    Wear of polyethylene (UHMWPE) is dependent on cross-shear. The aim of the present study was: 1) to develop a theoretical description of cross-shear, 2) to experimentally determine the relationship between cross-shear motion and UHMWPE wear using a wheel-on-flat apparatus, and 3) to calculate the work it takes to remove a unit volume of wear for the use in advanced computational models of wear. The theoretical description of cross-shear has been based on the previously reported finding that cross-shear is maximal when movement occurs perpendicular to fibril orientation. Here, cross-shear is described with a double-sinusoidal function that uses the angle between fibril orientation and velocity vector as input, and maximum cross-shear occurs at 90° and 270°. In the experimental part of the study, friction and wear of polyethylene were plotted against increasing sliding velocity vector angles, i.e. increasing cross-shear. It was found that wear intensified with increasing cross-shear, and wear depth could be predicted well using the double-sinusoidal function for cross-shear (r2=0.983). The friction data were then used to calculate the work to remove a unit particle by integrating the frictional force over the directional sliding distance. Using the wear volumes, determined for both longitudinal and perpendicular motion directions, the work to remove a unit volume of material was qy= 8.473 × 108 J/mm3 and qx= 1.321 × 108 J/mm3, respectively. Hence, 6.4 times more work was necessary to remove a unit wear volume in the direction of principal motion (i.e. along the molecular fibril orientation) than 90° perpendicular to it. In the future, these findings will be implemented in computational models to assess wear. PMID:23794761

  9. A three-dimensional axis for the study of femoral neck orientation

    PubMed Central

    Bonneau, Noémie; Libourel, Paul-Antoine; Simonis, Caroline; Puymerail, Laurent; Baylac, Michel; Tardieu, Christine; Gagey, Olivier

    2012-01-01

    A common problem in the quantification of the orientation of the femoral neck is the difficulty to determine its true axis; however, this axis is typically estimated visually only. Moreover, the orientation of the femoral neck is commonly analysed using angles that are dependent on anatomical planes of reference and only quantify the orientation in two dimensions. The purpose of this study is to establish a method to determine the three-dimensional orientation of the femoral neck using a three-dimensional model. An accurate determination of the femoral neck axis requires a reconsideration of the complex architecture of the proximal femur. The morphology of the femoral neck results from both the medial and arcuate trabecular systems, and the asymmetry of the cortical bone. Given these considerations, two alternative models, in addition to the cylindrical one frequently assumed, were tested. The surface geometry of the femoral neck was subsequently used to fit one cylinder, two cylinders and successive cross-sectional ellipses. The model based on successive ellipses provided a significantly smaller average deviation than the two other models (P < 0.001) and reduced the observer-induced measurement error. Comparisons with traditional measurements and analyses on a sample of 91 femora were also performed to assess the validity of the model based on successive ellipses. This study provides a semi-automatic and accurate method for the determination of the functional three-dimensional femoral neck orientation avoiding the use of a reference plane. This innovative method has important implications for future studies that aim to document and understand the change in the orientation of the femoral neck associated with the acquisition of a bipedal gait in humans. Moreover, the precise determination of the three-dimensional orientation has implications in current research involved in developing clinical applications in diagnosis, hip surgery and rehabilitation. PMID:22967192

  10. Midwifery and nursing students' communication skills and life orientation: correlation with stress coping approaches.

    PubMed

    Ozdemir, Gülsün; Kaya, Hatice

    2013-06-01

    Methods learnt by nursing and midwifery students' such as communication skills, optimisim and coping with stress would be used in their profeesional life. It is very important to promote their positive thinking and communication skills to raise coping with stress. This cross sectional study was performed to examine the nursing and midwifery students' communication skills and optimistic life orientation and its correlation with coping strategies with stress. The study population included 2572 students who were studying in departments of nursing and midwifery in Istanbul. The sample was included 1419 students. Three questionnaires including Communication Skills Test, Life Orientation Test and Ways of Coping Inventory were used for data collection. The data were evaluated by calculating frequency, percentage, arithmetic mean, standard deviation and Pearson correlation coefficient. Students' total mean score from the Communication Skills Scale was 165.27 ± 15.39 and for the Life Orientation Test was 18.51 ± 4.54. There was a positive correlation between their Life Orientation scores and the scores for self confidence (r = 0.34, P < 0.001), optimistic approach (r = 0.42, P < 0.001), and seeking social help (r = 0.17, P < 0.001). Also there was a significant positive correlation between Communication skill scores and self confidence (r = 0.46, P < 0.001), optimistic (r = 0.37, P < 0.001) and seeking social help approaches (r = 0.29, P < 0.001), but there was a significant negative correlation between communication skill scores and scores for helpless (r = -0.29, P < 0.001) and submissive approaches (r = -0.36, P < 0.001). As scores of students in optimistic life orientation and communication skills increased self confidence approach, optimistic, and social support seeking scores increased, whereas helpless, and submissive scores decreased.

  11. [The social role of the faculties of medicine: physicians' perception of the dominant orientation of their medical studies and social involvement].

    PubMed

    Dopelt, Keren; Yahav, Zehava; Urkin, Jacob; Bachner, Yaacov; Davidovitch, Nadav

    2014-02-01

    Medical education, based on the principles of social medicine, has the ability to contribute to reducing health disparities through the "creation" of doctors who are more involved in community programs. To compare the social and community orientation of graduates from the various medical schools. An online cross-sectional survey among 12,000 physicians who are graduates of Israeli medical schools was conducted in May 2011. The study encompassed 1,050 physicians, Israeli medical school graduates living in Israel and practicing medicine: 36% were Hebrew University graduates, 26% were Tel Aviv University graduates, 22% were Technion graduates and 16% were Ben-Gurion University (BGU) graduates. Higher rates of physicians who studied at the Technion and BGU are working or have worked in the periphery (approximately 50% vs. approximately 30% average of Hebrew and Tel-Aviv University schools). Among BGU graduates, 47% are active in community programs vs. 34-38% in other schools. Among physicians active in community programs, 32% of BGU alumni estimated that their medical education greatly influenced their community involvement vs. 8-15% in other schools. Hebrew University alumni graded their studies as having a higher research orientation. In contrast, BGU graduates graded their studies as having a higher social orientation, and had more positive attitudes on the role of the physician in reducing health disparities. Medical education with a social orientation will induce a socialization process that reinforces human values regarding the doctor-patient relationship and produce positive attitudes among future doctors regarding their social involvement. The findings emphasize the need to develop educational programs with a social orientation and to strengthen medical schools in the periphery.

  12. Leap Second Announcement - Naval Oceanography Portal

    Science.gov Websites

    section Advanced Search... Sections Home Time Earth Orientation Astronomy Meteorology Oceanography Ice You are here: Home › USNO › Earth Orientation › Leap Second Announcement USNO Logo USNO Navigation Earth Orientation Products GPS-based Products VLBI-based Products EO Information Center Publications

  13. Sparse Solution of Fiber Orientation Distribution Function by Diffusion Decomposition

    PubMed Central

    Yeh, Fang-Cheng; Tseng, Wen-Yih Isaac

    2013-01-01

    Fiber orientation is the key information in diffusion tractography. Several deconvolution methods have been proposed to obtain fiber orientations by estimating a fiber orientation distribution function (ODF). However, the L 2 regularization used in deconvolution often leads to false fibers that compromise the specificity of the results. To address this problem, we propose a method called diffusion decomposition, which obtains a sparse solution of fiber ODF by decomposing the diffusion ODF obtained from q-ball imaging (QBI), diffusion spectrum imaging (DSI), or generalized q-sampling imaging (GQI). A simulation study, a phantom study, and an in-vivo study were conducted to examine the performance of diffusion decomposition. The simulation study showed that diffusion decomposition was more accurate than both constrained spherical deconvolution and ball-and-sticks model. The phantom study showed that the angular error of diffusion decomposition was significantly lower than those of constrained spherical deconvolution at 30° crossing and ball-and-sticks model at 60° crossing. The in-vivo study showed that diffusion decomposition can be applied to QBI, DSI, or GQI, and the resolved fiber orientations were consistent regardless of the diffusion sampling schemes and diffusion reconstruction methods. The performance of diffusion decomposition was further demonstrated by resolving crossing fibers on a 30-direction QBI dataset and a 40-direction DSI dataset. In conclusion, diffusion decomposition can improve angular resolution and resolve crossing fibers in datasets with low SNR and substantially reduced number of diffusion encoding directions. These advantages may be valuable for human connectome studies and clinical research. PMID:24146772

  14. Quickbird Satellite in-orbit Modulation Transfer Function (MTF) Measurement Using Edge, Pulse and Impulse Methods for Summer 2003

    NASA Technical Reports Server (NTRS)

    Helder, Dennis; Choi, Taeyoung; Rangaswamy, Manjunath

    2005-01-01

    The spatial characteristics of an imaging system cannot be expressed by a single number or simple statement. However, the Modulation Transfer Function (MTF) is one approach to measure the spatial quality of an imaging system. Basically, MTF is the normalized spatial frequency response of an imaging system. The frequency response of the system can be evaluated by applying an impulse input. The resulting impulse response is termed the Point Spread function (PSF). This function is a measure of the amount of blurring present in the imaging system and is itself a useful measure of spatial quality. An underlying assumption is that the imaging system is linear and shift-independent. The Fourier transform of the PSF is called the Optical Transfer Function (OTF) and the normalized magnitude of the OTF is the MTF. In addition to using an impulse input, a knife-edge in technique has also been used in this project. The sharp edge exercises an imaging system at all spatial frequencies. The profile of an edge response from an imaging system is called an Edge Spread Function (ESF). Differentiation of the ESF results in a one-dimensional version of the Point Spread Function (PSF). Finally, MTF can be calculated through use of Fourier transform of the PSF as stated previously. Every image includes noise in some degree which makes MTF of PSF estimation more difficult. To avoid the noise effects, many MTF estimation approaches use smooth numerical models. Historically, Gaussian models and Fermi functions were applied to reduce the random noise in the output profiles. The pulse-input method was used to measure the MTF of the Landsat Thematic Mapper (TM) using 8th order even functions over the San Mateo Bridge in San Francisco, California. Because the bridge width was smaller than the 30-meter ground sample distance (GSD) of the TM, the Nyquist frequency was located before the first zero-crossing point of the sinc function from the Fourier transformation of the bridge pulse. To avoid the zero-crossing points in the frequency domain from a pulse, the pulse width should be less than the width of two pixels (or 2 GSD's), but the short extent of the pulse results in a poor signal-to-noise ratio. Similarly, for a high-resolution satellite imaging system such as Quickbird, the input pulse width was critical because of the zero crossing points and noise present in the background area. It is important, therefore, that the width of the input pulse be appropriately sized. Finally, the MTF was calculated by taking ratio between Fourier transform of output and Fourier transform of input. Regardless of whether the edge, pulse and impulse target method is used, the orientation of the targets is critical in order to obtain uniformly spaced sub-pixel data points. When the orientation is incorrect, sample data points tend to be located in clusters that result in poor reconstruction of the edge or pulse profiles. Thus, a compromise orientation must be selected so that all spectral bands can be accommodated. This report continues by outlining the objectives in Section 2, procedures followed in Section 3, descriptions of the field campaigns in Section 4, results in Section 5, and a brief summary in Section 6.

  15. Improved Sectional Image Analysis Technique for Evaluating Fiber Orientations in Fiber-Reinforced Cement-Based Materials.

    PubMed

    Lee, Bang Yeon; Kang, Su-Tae; Yun, Hae-Bum; Kim, Yun Yong

    2016-01-12

    The distribution of fiber orientation is an important factor in determining the mechanical properties of fiber-reinforced concrete. This study proposes a new image analysis technique for improving the evaluation accuracy of fiber orientation distribution in the sectional image of fiber-reinforced concrete. A series of tests on the accuracy of fiber detection and the estimation performance of fiber orientation was performed on artificial fiber images to assess the validity of the proposed technique. The validation test results showed that the proposed technique estimates the distribution of fiber orientation more accurately than the direct measurement of fiber orientation by image analysis.

  16. Improved Sectional Image Analysis Technique for Evaluating Fiber Orientations in Fiber-Reinforced Cement-Based Materials

    PubMed Central

    Lee, Bang Yeon; Kang, Su-Tae; Yun, Hae-Bum; Kim, Yun Yong

    2016-01-01

    The distribution of fiber orientation is an important factor in determining the mechanical properties of fiber-reinforced concrete. This study proposes a new image analysis technique for improving the evaluation accuracy of fiber orientation distribution in the sectional image of fiber-reinforced concrete. A series of tests on the accuracy of fiber detection and the estimation performance of fiber orientation was performed on artificial fiber images to assess the validity of the proposed technique. The validation test results showed that the proposed technique estimates the distribution of fiber orientation more accurately than the direct measurement of fiber orientation by image analysis. PMID:28787839

  17. Comparison of silicon, nickel, and nickel silicide (Ni 3Si) as substrates for epitaxial diamond growth

    NASA Astrophysics Data System (ADS)

    Tucker, D. A.; Seo, D.-K.; Whangbo, M.-H.; Sivazlian, F. R.; Stoner, B. R.; Bozeman, S. P.; Sowers, A. T.; Nemanich, R. J.; Glass, J. T.

    1995-07-01

    We carried out experimental and theoretical studies aimed at probing interface interactions of diamond with Si, Ni, and Ni 3Si substrates. Oriented diamond films deposited on (100) silicon were characterized by polar Raman, polar XRD, and cross-sectional HRTEM. These studies show that the diamond-(100)/Si(100) interface does not adopt the 45°-rotation but the 3 : 2-match arrangement. Our extended Hückel tight-binding (EHTB) electronic structure calculations for a model system show that the interface interaction favors the 3 : 2-match arrangement. Growth on polycrystalline Ni 3Si resulted in oriented diamond particles while, under the same growth conditions, largely graphite was formed on the nickel substrate. Our EHTB electronic structure calculations for model systems show that the (111) and (100) surfaces of Ni 3Si have a strong preference for diamond-nucleation over graphite-nucleation, but this is not the case for the (111) and (100) surfaces of Ni.

  18. Boundary Layer Flow Control by an Array of Ramp-Shaped Vortex Generators

    NASA Technical Reports Server (NTRS)

    Zaman, K. B. M. Q.; Hirt, S. M.; Bencic, T. J.

    2012-01-01

    Flow field survey results for the effect of ramp-shaped vortex generators (VG) on a turbulent boundary layer are presented. The experiments are carried out in a low-speed wind tunnel and the data are acquired primarily by hot-wire anemometry. Distributions of mean velocity and turbulent stresses as well as streamwise vorticity, on cross-sectional planes at various downstream locations, are obtained. These detailed flow field properties, including the boundary layer characteristics, are documented with the primary objective of aiding possible computational investigations. The results show that VG orientation with apex upstream, that produces a downwash directly behind it, yields a stronger pair of streamwise vortices. This is in contrast to the case with apex downstream that produces a pair of vortices of opposite sense. Thus, an array of VG s with the former orientation, usually considered for film-cooling application, may also be superior for mixing enhancement and boundary layer separation control. (See CASI ID 20120009374 for Supplemental CD-ROM.)

  19. Associations of Organizational Safety Practices and Culture With Physical Workload, Perceptions About Work, and Work-Related Injury and Symptoms Among Hospital Nurses.

    PubMed

    Lee, Soo-Jeong; Lee, Joung Hee

    The study aim was to examine the relationships of organizational safety practices with nurses' perceptions about job and risk and experiences of work-related injury and symptoms. Nursing professions report high rates of work-related injuries. Organizational safety practices have been linked to workers' safety outcomes and perceptions about work. This study analyzed data from a random sample of 280 California RNs in a cross-sectional statewide survey. Data were collected by both postal and online surveys. Higher perceptions of organizational safety practices (safety climate, ergonomic practices, people-oriented culture) were significantly associated with lower physical workload, lower job strain, higher job satisfaction, lower risk perception, and lower work-related injury and symptom experiences. Ergonomic practices and people-oriented culture were associated with less intention of leaving job. Organizational safety practices may play a pivotal role in improving positive perceptions about jobs, reducing injury risks, and promoting nurse retention.

  20. Boundary Layer Flow Control by an Array of Ramp-Shaped Vortex Generators

    NASA Technical Reports Server (NTRS)

    Zaman, K. B. M. Q.; Hirt, S. M.; Bencic, T. J.

    2012-01-01

    Flow field survey results for the effect of ramp-shaped vortex generators (VG) on a turbulent boundary layer are presented. The experiments are carried out in a low-speed wind tunnel and the data are acquired primarily by hot-wire anemometry. Distributions of mean velocity and turbulent stresses as well as streamwise vorticity, on cross-sectional planes at various downstream locations, are obtained. These detailed flow field properties, including the boundary layer characteristics, are documented with the primary objective of aiding possible computational investigations. The results show that VG orientation with apex upstream, that produces a downwash directly behind it, yields a stronger pair of streamwise vortices. This is in contrast to the case with apex downstream that produces a pair of vortices of opposite sense. Thus, an array of VG s with the former orientation, usually considered for film-cooling application, may also be superior for mixing enhancement and boundary layer separation control. The data files can be found on a supplemental CD.

  1. Atomic structure and stoichiometry of In(Ga)As/GaAs quantum dots grown on an exact-oriented GaP/Si(001) substrate

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Schulze, C. S.; Prohl, C.; Füllert, V.

    2016-04-04

    The atomic structure and stoichiometry of InAs/InGaAs quantum-dot-in-a-well structures grown on exactly oriented GaP/Si(001) are revealed by cross-sectional scanning tunneling microscopy. An averaged lateral size of 20 nm, heights up to 8 nm, and an In concentration of up to 100% are determined, being quite similar compared with the well-known quantum dots grown on GaAs substrates. Photoluminescence spectra taken from nanostructures of side-by-side grown samples on GaP/Si(001) and GaAs(001) show slightly blue shifted ground-state emission wavelength for growth on GaP/Si(001) with an even higher peak intensity compared with those on GaAs(001). This demonstrates the high potential of GaP/Si(001) templates for integration ofmore » III-V optoelectronic components into silicon-based technology.« less

  2. Sexual Orientation Differences in Health and Wellbeing Among Women Living with HIV in Canada: Findings from a National Cohort Study.

    PubMed

    Logie, Carmen H; Lacombe-Duncan, Ashley; Wang, Ying; Kaida, Angela; de Pokomandy, Alexandra; Webster, Kath; Conway, Tracey; Loutfy, Mona

    2018-06-01

    Sexual orientation differences in health and wellbeing among women living with HIV (WLH) are underexplored. Limited research available, however, suggests that sexual minority WLH may experience barriers to HIV care. Cross-sectional baseline data was analyzed from a Canadian cohort study with WLH (sexual minority women [SMW]: n = 180; heterosexual women: n = 1240). SMW (median age 38 years, IQR 13) included bisexual (58.9%), lesbian (17.8%) and other sexualities (23.3%). In multivariable analyses adjusting for age, poverty, education, and ethnicity, SMW identity was associated with increased odds of: clinical (80% vs. 100% antiretroviral adherence), intrapersonal (previous/current injection drug use [IDU] vs. no IDU history, depression, lower resilience), interpersonal (childhood abuse, sex work, adulthood abuse), and structural (HIV support services barriers, unstable housing, racial discrimination, gender discrimination) factors in comparison with heterosexual identity. Sexual minority WLH experience social and health disparities relative to heterosexual WLH, highlighting the need for interventions to promote health equity.

  3. Species-Independent Modeling of High-Frequency Ultrasound Backscatter in Hyaline Cartilage.

    PubMed

    Männicke, Nils; Schöne, Martin; Liukkonen, Jukka; Fachet, Dominik; Inkinen, Satu; Malo, Markus K; Oelze, Michael L; Töyräs, Juha; Jurvelin, Jukka S; Raum, Kay

    2016-06-01

    Apparent integrated backscatter (AIB) is a common ultrasound parameter used to assess cartilage matrix degeneration. However, the specific contributions of chondrocytes, proteoglycan and collagen to AIB remain unknown. To reveal these relationships, this work examined biopsies and cross sections of human, ovine and bovine cartilage with 40-MHz ultrasound biomicroscopy. Site-matched estimates of collagen concentration, proteoglycan concentration, collagen orientation and cell number density were employed in quasi-least-squares linear regression analyses to model AIB. A positive correlation (R(2) = 0.51, p < 10(-4)) between AIB and a combination model of cell number density and collagen concentration was obtained for collagen orientations approximately perpendicular (>70°) to the sound beam direction. These findings indicate causal relationships between AIB and cartilage structural parameters and could aid in more sophisticated future interpretations of ultrasound backscatter. Copyright © 2016 World Federation for Ultrasound in Medicine & Biology. Published by Elsevier Inc. All rights reserved.

  4. Endoscopic ultrasound description of liver segmentation and anatomy.

    PubMed

    Bhatia, Vikram; Hijioka, Susumu; Hara, Kazuo; Mizuno, Nobumasa; Imaoka, Hiroshi; Yamao, Kenji

    2014-05-01

    Endoscopic ultrasound (EUS) can demonstrate the detailed anatomy of the liver from the transgastric and transduodenal routes. Most of the liver segments can be imaged with EUS, except the right posterior segments. The intrahepatic vascular landmarks include the major hepatic veins, portal vein radicals, hepatic arterial branches, and the inferior vena cava, and the venosum and teres ligaments are other important intrahepatic landmarks. The liver hilum and gallbladder serve as useful surface landmarks. Deciphering liver segmentation and anatomy by EUS requires orienting the scan planes with these landmarkstructures, and is different from the static cross-sectional radiological images. Orientation during EUS requires appreciation of the numerous scan planes possible in real-time, and the direction of scanning from the stomach and duodenal bulb. We describe EUS imaging of the liver with a curved linear probe in a step-by-step approach, with the relevant anatomical details, potential applications, and pitfalls of this novel EUS application. © 2013 The Authors. Digestive Endoscopy © 2013 Japan Gastroenterological Endoscopy Society.

  5. Minimum principles in electromagnetic scattering by small aspherical particles

    NASA Astrophysics Data System (ADS)

    Kostinski, Alex B.; Mongkolsittisilp, Ajaree

    2013-12-01

    We consider the question of optimal shapes, e.g., those causing minimal extinction among all shapes of equal volume. Guided by the isoperimetric property of a sphere, relevant in the geometrical optics limit of scattering by large particles, we examine an analogous question in the low frequency approximation, seeking to disentangle electric and geometric contributions. To that end, we survey the literature on shape functionals and focus on ellipsoids, giving a simple discussion of spherical optimality for the coated ellipsoidal particle. Monotonic increase with asphericity in the low frequency regime for orientation-averaged induced dipole moments and scattering cross-sections is also shown. Additional physical insight is obtained from the Rayleigh-Gans (transparent) limit and eccentricity expansions. We propose connecting low and high frequency regimes in a single minimum principle valid for all size parameters, provided that reasonable size distributions of randomly oriented aspherical particles wash out the resonances for intermediate size parameters. This proposal is further supported by the sum rule for integrated extinction.

  6. Patient satisfaction in Malaysia's busiest outpatient medical care.

    PubMed

    Ganasegeran, Kurubaran; Perianayagam, Wilson; Manaf, Rizal Abdul; Jadoo, Saad Ahmed Ali; Al-Dubai, Sami Abdo Radman

    2015-01-01

    This study aimed to explore factors associated with patient satisfaction of outpatient medical care in Malaysia. A cross-sectional exit survey was conducted among 340 outpatients aged between 13 and 80 years after successful clinical consultations and treatment acquirements using convenience sampling at the outpatient medical care of Tengku Ampuan Rahimah Hospital (HTAR), Malaysia, being the country's busiest medical outpatient facility. A survey that consisted of sociodemography, socioeconomic, and health characteristics and the validated Short-Form Patient Satisfaction Questionnaire (PSQ-18) scale were used. Patient satisfaction was the highest in terms of service factors or tangible priorities, particularly "technical quality" and "accessibility and convenience," but satisfaction was low in terms of service orientation of doctors, particularly the "time spent with doctor," "interpersonal manners," and "communication" during consultations. Gender, income level, and purpose of visit to the clinic were important correlates of patient satisfaction. Effort to improve service orientation among doctors through periodical professional development programs at hospital and national level is essential to boost the country's health service satisfaction.

  7. Role of Cu layer thickness on the magnetic anisotropy of pulsed electrodeposited Ni/Cu/Ni tri-layer

    NASA Astrophysics Data System (ADS)

    Dhanapal, K.; Prabhu, D.; Gopalan, R.; Narayanan, V.; Stephen, A.

    2017-07-01

    The Ni/Cu/Ni tri-layer film with different thickness of Cu layer was deposited using pulsed electrodeposition method. The XRD pattern of all the films show the formation of fcc structure of nickel and copper. This shows the orientated growth in the (2 2 0) plane of the layered films as calculated from the relative intensity ratio. The layer formation in the films were observed from cross sectional view using FE-SEM and confirms the decrease in Cu layer thickness with decreasing deposition time. The magnetic anisotropy behaviour was measured using VSM with two different orientations of layered film. This shows that increasing anisotropy energy with decreasing Cu layer thickness and a maximum of  -5.13  ×  104 J m-3 is observed for copper deposited for 1 min. From the K eff.t versus t plot, development of perpendicular magnetic anisotropy in the layered system is predicted below 0.38 µm copper layer thickness.

  8. Cross-modality Sharpening of Visual Cortical Processing through Layer 1-Mediated Inhibition and Disinhibition

    PubMed Central

    Ibrahim, Leena A.; Mesik, Lukas; Ji, Xu-ying; Fang, Qi; Li, Hai-fu; Li, Ya-tang; Zingg, Brian; Zhang, Li I.; Tao, Huizhong Whit

    2016-01-01

    Summary Cross-modality interaction in sensory perception is advantageous for animals’ survival. How cortical sensory processing is cross-modally modulated and what are the underlying neural circuits remain poorly understood. In mouse primary visual cortex (V1), we discovered that orientation selectivity of layer (L)2/3 but not L4 excitatory neurons was sharpened in the presence of sound or optogenetic activation of projections from primary auditory cortex (A1) to V1. The effect was manifested by decreased average visual responses yet increased responses at the preferred orientation. It was more pronounced at lower visual contrast, and was diminished by suppressing L1 activity. L1 neurons were strongly innervated by A1-V1 axons and excited by sound, while visual responses of L2/3 vasoactive intestinal peptide (VIP) neurons were suppressed by sound, both preferentially at the cell's preferred orientation. These results suggest that the cross-modality modulation is achieved primarily through L1 neuron and L2/3 VIP-cell mediated inhibitory and disinhibitory circuits. PMID:26898778

  9. Microstructure Imaging of Crossing (MIX) White Matter Fibers from diffusion MRI

    PubMed Central

    Farooq, Hamza; Xu, Junqian; Nam, Jung Who; Keefe, Daniel F.; Yacoub, Essa; Georgiou, Tryphon; Lenglet, Christophe

    2016-01-01

    Diffusion MRI (dMRI) reveals microstructural features of the brain white matter by quantifying the anisotropic diffusion of water molecules within axonal bundles. Yet, identifying features such as axonal orientation dispersion, density, diameter, etc., in complex white matter fiber configurations (e.g. crossings) has proved challenging. Besides optimized data acquisition and advanced biophysical models, computational procedures to fit such models to the data are critical. However, these procedures have been largely overlooked by the dMRI microstructure community and new, more versatile, approaches are needed to solve complex biophysical model fitting problems. Existing methods are limited to models assuming single fiber orientation, relevant to limited brain areas like the corpus callosum, or multiple orientations but without the ability to extract detailed microstructural features. Here, we introduce a new and versatile optimization technique (MIX), which enables microstructure imaging of crossing white matter fibers. We provide a MATLAB implementation of MIX, and demonstrate its applicability to general microstructure models in fiber crossings using synthetic as well as ex-vivo and in-vivo brain data. PMID:27982056

  10. Determination of fiber volume in graphite/epoxy materials using computer image analysis

    NASA Technical Reports Server (NTRS)

    Viens, Michael J.

    1990-01-01

    The fiber volume of graphite/epoxy specimens was determined by analyzing optical images of cross sectioned specimens using image analysis software. Test specimens were mounted and polished using standard metallographic techniques and examined at 1000 times magnification. Fiber volume determined using the optical imaging agreed well with values determined using the standard acid digestion technique. The results were found to agree within 5 percent over a fiber volume range of 45 to 70 percent. The error observed is believed to arise from fiber volume variations within the graphite/epoxy panels themselves. The determination of ply orientation using image analysis techniques is also addressed.

  11. Three dimensional nozzle-exhaust flow field analysis by a reference plane technique.

    NASA Technical Reports Server (NTRS)

    Dash, S. M.; Del Guidice, P. D.

    1972-01-01

    A numerical method based on reference plane characteristics has been developed for the calculation of highly complex supersonic nozzle-exhaust flow fields. The difference equations have been developed for three coordinate systems. Local reference plane orientations are employed using the three coordinate systems concurrently thus catering to a wide class of flow geometries. Discontinuities such as the underexpansion shock and contact surfaces are computed explicitly for nonuniform vehicle external flows. The nozzles considered may have irregular cross-sections with swept throats and may be stacked in modules using the vehicle undersurface for additional expansion. Results are presented for several nozzle configurations.

  12. The electron-spin--nuclear-spin interaction studied by polarized neutron scattering.

    PubMed

    Stuhrmann, Heinrich B

    2007-11-01

    Dynamic nuclear spin polarization (DNP) is mediated by the dipolar interaction of paramagnetic centres with nuclear spins. This process is most likely to occur near paramagnetic centres at an angle close to 45 degrees with respect to the direction of the external magnetic field. The resulting distribution of polarized nuclear spins leads to an anisotropy of the polarized neutron scattering pattern, even with randomly oriented radical molecules. The corresponding cross section of polarized coherent neutron scattering in terms of a multipole expansion is derived for radical molecules in solution. An application using data of time-resolved polarized neutron scattering from an organic chromium(V) molecule is tested.

  13. An experimental investigation of Iosipescu specimen for composite materials

    NASA Technical Reports Server (NTRS)

    Ho, H.; Tsai, M. Y.; Morton, J.; Farley, G. L.

    1991-01-01

    A detailed experimental evaluation of the Iosipescu specimen tested in the modified Wyoming fixture is presented. Moire interferometry is employed to determine the deformation of unidirectional and cross-ply graphite-epoxy specimens. The results of the moire experiments are compared to those from the traditional strain-gage method. It is shown that the strain-gage readings from one surface of a specimen together with corresponding data from moire interferometry on the opposite face documented an extreme sensitivity of some fiber orientations to twisting. A localized hybrid analysis is introduced to perform efficient reduction of moire data, producing whole-field strain distributions in the specimen test sections.

  14. Young people with features of gender dysphoria: Demographics and associated difficulties.

    PubMed

    Holt, Vicky; Skagerberg, Elin; Dunsford, Michael

    2016-01-01

    This article presents the findings from a cross-sectional study on demographic variables and associated difficulties in 218 children and adolescents (Mean age = 14 years, SD = 3.08, range = 5-17 years), with features of gender dysphoria, referred to the Gender Identity Development Service (GIDS) in London during a 1-year period (1 January 2012-31 December 2012). Data were extracted from patient files (i.e. referral letters, clinical notes and clinician reports). The most commonly reported associated difficulties were bullying, low mood/depression and self-harming. There was a gender difference on some of the associated difficulties with reports of self-harm being significantly more common in the natal females and autism spectrum conditions being significantly more common in the natal males. The findings also showed that many of the difficulties increased with age. Findings regarding demographic variables, gender dysphoria, sexual orientation and family features are reported, and limitations and implications of the cross-sectional study are discussed. In conclusion, young people with gender dysphoria often present with a wide range of associated difficulties which clinicians need to take into account, and our article highlights the often complex presentations of these young people. © The Author(s) 2014.

  15. Aerodynamic design of gas and aerosol samplers for aircraft

    NASA Technical Reports Server (NTRS)

    Soderman, Paul T.; Hazen, Nathan L.; Brune, William H.

    1991-01-01

    The aerodynamic design of airborne probes for the capture of air and aerosols is discussed. Emphasis is placed on the key parameters that affect proper sampling, such as inlet-lip design, internal duct components for low pressure drop, and exhaust geometry. Inlet designs that avoid sonic flow conditions on the lip and flow separation in the duct are shown. Cross-stream velocities of aerosols are expressed in terms of droplet density and diameter. Flow curvature, which can cause aerosols to cross streamlines and impact on probe walls, can be minimized by means of a proper inlet shape and proper probe orientation, and by avoiding bends upstream of the test section. A NASA panel code called PMARC was used successfully to compute streamlines around aircraft and probes, as well as to compute to local velocity and pressure distributions in inlets. A NACA 1-series inlet with modified lip radius was used for the airborne capture of stratospheric chlorine monoxide at high altitude and high flight speed. The device has a two-stage inlet that decelerates the inflow with little disturbance to the flow through the test section. Diffuser design, exhaust hood design, valve loss, and corner vane geometry are discussed.

  16. Fast 5DOF needle tracking in iOCT.

    PubMed

    Weiss, Jakob; Rieke, Nicola; Nasseri, Mohammad Ali; Maier, Mathias; Eslami, Abouzar; Navab, Nassir

    2018-06-01

    Intraoperative optical coherence tomography (iOCT) is an increasingly available imaging technique for ophthalmic microsurgery that provides high-resolution cross-sectional information of the surgical scene. We propose to build on its desirable qualities and present a method for tracking the orientation and location of a surgical needle. Thereby, we enable the direct analysis of instrument-tissue interaction directly in OCT space without complex multimodal calibration that would be required with traditional instrument tracking methods. The intersection of the needle with the iOCT scan is detected by a peculiar multistep ellipse fitting that takes advantage of the directionality of the modality. The geometric modeling allows us to use the ellipse parameters and provide them into a latency-aware estimator to infer the 5DOF pose during needle movement. Experiments on phantom data and ex vivo porcine eyes indicate that the algorithm retains angular precision especially during lateral needle movement and provides a more robust and consistent estimation than baseline methods. Using solely cross-sectional iOCT information, we are able to successfully and robustly estimate a 5DOF pose of the instrument in less than 5.4 ms on a CPU.

  17. Navigation-supported diagnosis of the substantia nigra by matching midbrain sonography and MRI

    NASA Astrophysics Data System (ADS)

    Salah, Zein; Weise, David; Preim, Bernhard; Classen, Joseph; Rose, Georg

    2012-03-01

    Transcranial sonography (TCS) is a well-established neuroimaging technique that allows for visualizing several brainstem structures, including the substantia nigra, and helps for the diagnosis and differential diagnosis of various movement disorders, especially in Parkinsonian syndromes. However, proximate brainstem anatomy can hardly be recognized due to the limited image quality of B-scans. In this paper, a visualization system for the diagnosis of the substantia nigra is presented, which utilizes neuronavigated TCS to reconstruct tomographical slices from registered MRI datasets and visualizes them simultaneously with corresponding TCS planes in realtime. To generate MRI tomographical slices, the tracking data of the calibrated ultrasound probe are passed to an optimized slicing algorithm, which computes cross sections at arbitrary positions and orientations from the registered MRI dataset. The extracted MRI cross sections are finally fused with the region of interest from the ultrasound image. The system allows for the computation and visualization of slices at a near real-time rate. Primary tests of the system show an added value to the pure sonographic imaging. The system also allows for reconstructing volumetric (3D) ultrasonic data of the region of interest, and thus contributes to enhancing the diagnostic yield of midbrain sonography.

  18. Nano-scale phase transformation in Ti-implanted austenitic 301 stainless steel.

    PubMed

    Gustiono, Dwi; Sakaguchi, Norihito; Shibayama, Tamaki; Kinoshita, Hiroshi; Takahashi, Heishichiro

    2003-01-01

    Phase-transformation behaviours were investigated for austenitic 301 stainless steel during implantation at room temperature with 300 keV Ti ions to fluences of 8 x 10(19) to approximately 3 x 10(21) ions m(-2) by means of transmission electron microscopy. The cross-sectional specimen was prepared using a focused ion beam. Plan observation of the implanted specimen showed that phase transformation from gamma-phase to alpha-phase was induced by implantation to a fluence of 3 x 10(20) Ti ions m(-2). The nucleation of the irradiation (implantation)-induced phase increased with the increase of the dose. The orientation relationship between the gamma matrix and the induced alpha martensitic phase was identified as (011)alpha//(111)gamma and [11-1]alpha//[10-1], close to the Kurdjumov-Sachs relationship. Cross-sectional observation after implantation to a fluence of 5 x 10(20) ions m(-2) showed that phase transformation mostly nucleated near the surface and occurred in the higher the concentration gradient of the implanted ion, i.e. a higher stress concentration takes place and this stress introduced by the implanted ions acts as a driving force for the transformation.

  19. Reducing health disparities: the social role of medical schools.

    PubMed

    Dopelt, Keren; Davidovitch, Nadav; Yahav, Zehava; Urkin, Jacob; Bachner, Yaacov G

    2014-06-01

    Medical education based on the principles of social medicine can contribute toward reducing health disparities through the "creation" of doctors who are more involved in community programs. This study compared the social medicine orientation of graduates from various medical schools in Israel. The authors conducted an online cross-sectional survey in May 2011 among physicians who are graduates of Israeli medical schools. The study included 1050 physicians practicing medicine in Israel: 36% who are graduates from the Hebrew University, 26% from Tel Aviv University, 22% from the Technion and 16% from Ben-Gurion University. A greater percentage of physicians who studied either at the Technion or Ben-Gurion are working or have worked in the periphery (∼50% vs. ∼30% at the Hebrew and Tel Aviv Universities). Among Ben-Gurion graduates, 47% are active in social medicine programs vs. 34-38% from other schools. Among physicians active in social medicine programs, 32% of Ben-Gurion alumni estimated that their medical education greatly influenced their social medicine involvement vs. 8-15% from other schools. Hebrew University alumni described their studies as more research-oriented. In contrast, Ben-Gurion graduates described their studies as more social medicine-oriented and they exhibited more positive attitudes about the role of physicians in reducing health disparities. Social medicine-oriented medical education induces a socialization process reinforcing human values regarding doctor-patient relationships and produces positive attitudes among future doctors about social involvement. Findings emphasize the need to develop educational programs with this orientation and to strengthen medical schools in the periphery.

  20. Still in the closet: the invisible minority in medical education

    PubMed Central

    2014-01-01

    Background To investigate the relationship between sexual orientation and gender identity in regard to levels of depression; levels of perceived social support; comfort with disclosure of orientation; and the lesbian, gay, bisexual, and transgender (LGBT) campus climate. Methods E-mail invitations to participate in the current cross-sectional questionnaire-based study were sent to all thirty US osteopathic medical schools in August 2012; six schools responded and disseminated the survey to their students. Participating students completed an anonymous web-based survey, and informed consent was obtained when they accessed the survey. The survey was designed specifically for the current study but contained scales used with permission from previously published research. Analysis procedures included nonparametric tests, one-way analysis of variance and Pearson’s correlations. Results Of the 4112 students invited to participate in the survey, 1334 (32.4%) completed it. Approximately 85% of respondents self-identified as heterosexual only. No respondents identified as transgender. In general, LGB students indicated higher levels of depression (P < .001), slightly lower levels of perceived social support (P < .001), and more discomfort with disclosure of sexual orientation (P < .001). A majority of students rated their campus climate as noninclusive. Conclusions Results of the current study indicated a relationship between sexual orientation and depression, perceived social support, comfort with disclosure of orientation, and the LGBT campus climate in osteopathic medical students. In the future, osteopathic medical schools should consider closely examining their campus culture in order to create a more positive and inclusive environment for all its students. PMID:25128252

  1. School food environment: Quality and advertisement frequency of child-oriented packaged products within walking distance of public schools.

    PubMed

    Missbach, Benjamin; Pachschwöll, Caterina; Kuchling, Daniel; König, Jürgen

    2017-06-01

    Food marketing for children is a major concern for public health nutrition and many schools make efforts to increase healthy eating. Food environments surrounding schools in urban areas may undermine these efforts for healthy nutrition within school programs. Our study aim is to describe the nutrition environment within walking distance of schools in terms of food quality and food marketing and to explore the degree to which elements of the nutrition environment varies by proximity to schools. In a cross-sectional study, we analyzed the surrounding food environments of a convenience sample of 46 target schools within 950m walking distance in 7 different urban districts across Vienna, Austria. In total, we analyzed data from 67 fast food outlets and 54 supermarkets analyzing a total of 43.129 packaged snack food and beverage products, from which 85% were for adults and 15% of the products were child-oriented. Proximity to the schools did not affect the availability of child-oriented products and dedicated food advertisements for children. After applying nutrient profiling using the Nutrient Profiling Model (NPM) on child-oriented products, results showed that 15.8% of the packaged snack food were categorized as "healthy" foods and 84.2% as "less healthy"; for beverages 65.7% were categorized as "healthy" and 34.3% as "less healthy". In conclusion, our results show that child-oriented snacks are not more frequently advertised around schools but substantially lack in nutritional quality with the potential to undermine efforts for promoting healthy eating practices within schools.

  2. Cognitive indicators of social anxiety in youth: a structural equation analysis.

    PubMed

    Rudy, Brittany M; Davis, Thompson E; Matthews, Russell A

    2014-01-01

    Previous studies have demonstrated significant relationships among various cognitive variables such as negative cognition, self-efficacy, and social anxiety. Unfortunately, few studies focus on the role of cognition among youth, and researchers often fail to use domain-specific measures when examining cognitive variables. Therefore, the purpose of the present study was to examine domain-specific cognitive variables (i.e., socially oriented negative self-referent cognition and social self-efficacy) and their relationships to social anxiety in children and adolescents using structural equation modeling techniques. A community sample of children and adolescents (n=245; 55.9% female; 83.3% Caucasian, 9.4% African American, 2% Asian, 2% Hispanic, 2% "other," and 1.2% not reported) completed questionnaires assessing social cognition and social anxiety symptomology. Three latent variables were created to examine the constructs of socially oriented negative self-referent cognition (as measured by the SONAS scale), social self-efficacy (as measured by the SEQSS-C), and social anxiety (as measured by the SPAI-C and the Brief SA). The resulting measurement model of latent variables fit the data well. Additionally, consistent with the study hypothesis, results indicated that social self-efficacy likely mediates the relationship between socially oriented negative self-referent cognition and social anxiety, and socially oriented negative self-referent cognition yields significant direct and indirect effects on social anxiety. These findings indicate that socially oriented negative cognitions are associated with youth's beliefs about social abilities and the experience of social anxiety. Future directions for research and study limitations, including use of cross-sectional data, are discussed. © 2013.

  3. Evidence of Syndemics and Sexuality-Related Discrimination Among Young Sexual-Minority Women.

    PubMed

    Coulter, Robert W S; Kinsky, Suzanne M; Herrick, Amy L; Stall, Ron D; Bauermeister, José A

    2015-09-01

    Syndemics, or the co-occurrence and interaction of health problems, have been examined extensively among young men who have sex with men, but their existence remain unexamined, to our knowledge, among sexual-minority (i.e., lesbian, gay, and bisexual) women. Thus, we investigated if syndemics were present among young sexual-minority women, and if sexual-orientation discrimination was an independent variable of syndemic production. A total of 467 sexual-minority women between the ages of 18 and 24 completed a cross-sectional online survey regarding their substance use, mental health, sexual behaviors, height, weight, and experiences of discrimination. We used structural equation modeling to investigate the presence of syndemics and their relationship to sexual-orientation discrimination. Heavy episodic drinking, marijuana use, ecstasy use, hallucinogen use, depressive symptoms, multiple sexual partners, and history of sexually transmitted infections (STIs) comprised syndemics in this population (chi-square=24.989, P=.201; comparative fit index [CFI]=0.946; root mean square error of approximation [RMSEA]=0.023). Sexual-orientation discrimination is significantly and positively associated with the latent syndemic variable (unstandardized coefficient=0.095, P<.05), and this model fit the data well (chi-square=33.558, P=.059; CFI=0.914; RMSEA=0.029). The reverse causal model showed syndemics is not an independent variable of sexual-orientation discrimination (unstandardized coefficient=0.602, P>.05). Syndemics appear to be present and associated with sexual-orientation discrimination among young sexual-minority women. Interventions aimed at reducing discrimination or increasing healthy coping may help reduce substance use, depressive symptoms, and sexual risk behaviors in this population.

  4. Three-Point Bending Fracture Behavior of Single Oriented Crossed-Lamellar Structure in Scapharca broughtonii Shell

    PubMed Central

    Ji, Hong-Mei; Zhang, Wen-Qian; Wang, Xu; Li, Xiao-Wu

    2015-01-01

    The three-point bending strength and fracture behavior of single oriented crossed-lamellar structure in Scapharca broughtonii shell were investigated. The samples for bending tests were prepared with two different orientations perpendicular and parallel to the radial ribs of the shell, which corresponds to the tiled and stacked directions of the first-order lamellae, respectively. The bending strength in the tiled direction is approximately 60% higher than that in the stacked direction, primarily because the regularly staggered arrangement of the second-order lamellae in the tiled direction can effectively hinder the crack propagation, whereas the cracks can easily propagate along the interfaces between lamellae in the stacked direction. PMID:28793557

  5. VLBI-based Products - Naval Oceanography Portal

    Science.gov Websites

    section Advanced Search... Sections Home Time Earth Orientation Astronomy Meteorology Oceanography Ice You are here: Home › USNO › Earth Orientation › VLBI-based Products USNO Logo USNO Navigation Earth determine Earth Orientation Parameters (EOP) is Very Long Baseline Interferometry (VLBI). USNO provides both

  6. On the measurement of fiber orientation in fiberboard

    Treesearch

    Otto Suchsland; Charles W. McMillin

    1983-01-01

    An attempt to measure the vertical component of fiber orientation in fiberboard is described. The experiment is based on the obvious reduction of the furnish fiber length which occurs by cutting thin microtome sections of the board parallel to the board plane. Only when no vertical fiber orientation component is present will the fibers contained in these sections have...

  7. Exploring the cross-level impact of market orientation on nursing innovation in hospitals.

    PubMed

    Weng, Rhay-Hung; Huang, Ching-Yuan; Lin, Tzu-En

    2013-01-01

    Recently, many hospitals have been enthusiastically encouraging nurses to pursue nursing innovation to improve health care quality and increase nursing productivity by proposing innovative training methods, products, services, care skills, and care methods. This study tried to explore the cross-level impact of market orientation on nursing innovation. In our study, 3 to 7 nurses and 1 manager were selected from each nursing team to act as respondents. The questionnaire survey began after the managers of each nursing team and the nurses had been anonymously coded and paired up in Taiwan in 2009-2010. A total of 808 valid questionnaires were collected, including 172 valid teams. Hierarchical linear modeling was used for the analysis. Nursing innovation is the sum of knowledge creation, innovation behavior, and innovation diffusion displayed by the nurses during nursing care. The level of knowledge creation, as perceived by the nurses, was the highest, whereas the level of innovation diffusion was the lowest. Results of hierarchical linear modeling showed that only competitor orientation yielded a significant positive influence on knowledge creation, innovation behavior, or innovation diffusion. The r values were 0.53, 0.49, and 0.61, respectively. Customer orientation and interfunctional coordination did not have significant effects on nursing innovation. Hospital nurses exhibited better performance in knowledge creation than in innovation behavior and diffusion. Only competitor orientation had a significantly positive and cross-level influence on nursing innovation. However, competitor orientation was observed to be the lowest dimension of market orientation, which indicates that this factor should be the focus when improving nursing innovations in the future. Therefore, managers should continually understand the strategies, advantages, and methods of their competitors.

  8. Cross-Cultural Mentoring: A Pathway to Making Excellence Inclusive

    ERIC Educational Resources Information Center

    Crutcher, Betty Neal

    2014-01-01

    Cross-cultural mentoring involves an ongoing, intentional, and mutually enriching relationship with someone of a different race, gender, ethnicity, religion, cultural background, socioeconomic background, sexual orientation, or nationality. Generally more experienced, the cross-cultural mentor guides the intellectual and personal development of…

  9. Previous International Experience, Cross-Cultural Training, and Expatriates' Cross-Cultural Adjustment: Effects of Cultural Intelligence and Goal Orientation

    ERIC Educational Resources Information Center

    Koo Moon, Hyoung; Kwon Choi, Byoung; Shik Jung, Jae

    2012-01-01

    Although various antecedents of expatriates' cross-cultural adjustment have been addressed, previous international experience, predeparture cross-cultural training, and cultural intelligence (CQ) have been most frequently examined. However, there are few attempts that explore the effects of these antecedents simultaneously or consider the possible…

  10. Statistical analysis on multifractal detrended cross-correlation coefficient for return interval by oriented percolation

    NASA Astrophysics Data System (ADS)

    Deng, Wei; Wang, Jun

    2015-06-01

    We investigate and quantify the multifractal detrended cross-correlation of return interval series for Chinese stock markets and a proposed price model, the price model is established by oriented percolation. The return interval describes the waiting time between two successive price volatilities which are above some threshold, the present work is an attempt to quantify the level of multifractal detrended cross-correlation for the return intervals. Further, the concept of MF-DCCA coefficient of return intervals is introduced, and the corresponding empirical research is performed. The empirical results show that the return intervals of SSE and SZSE are weakly positive multifractal power-law cross-correlated, and exhibit the fluctuation patterns of MF-DCCA coefficients. The similar behaviors of return intervals for the price model is also demonstrated.

  11. Predictive Engineering Tools for Injection-Molded Long-Carbon-Fiber Thermoplastic Composites - FY 2015 First Quarterly Report

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Nguyen, Ba Nghiep; Fifield, Leonard S.; Kijewski, Seth A.

    2015-01-29

    During the first quarter of FY 2015, the following technical progress has been made toward project milestones: 1) Autodesk delivered a new research version of ASMI to PNNL. This version includes the improved 3D fiber orientation solver, and the reduced order model (ROM) for fiber length distribution using the proper orthogonal decomposition (POD) implemented in the mid-plane, dual-domain and 3D solvers. 2) Autodesk coordinated a conference paper with PNNL reporting ASMI mid-plane fiber orientation predictions compared with the measured data for two PlastiComp plaques. This paper was accepted for presentation at the 2015 Society for Plastics Engineers (SPE) ANTEC conference.more » 3) The University of Illinois (Prof. Tucker) assisted team members from Purdue with fiber orientation measurement techniques, including interpretation of off-axis cross sections. 4) The University of Illinois assisted Autodesk team members with software implementation of the POD approach for fiber length modeling, and with fiber orientation modeling. 5) The University of Illinois co-authored in the SPE ANTEC paper, participated with the team in discussions of plaque data and model results, and participated in the definition of go/no-go experiments and data. 6) Purdue University (Purdue) conducted fiber orientation measurements for 3 PlastiComp plaques: fast-fill 30wt% LCF/PP center-gated, fast-fill 50wt% LCF/PA66 edge-gated and fast-fill 50wt% LCF/PA66 center-gated plaques, and delivered the fiber orientation data for these plaques at the selected locations (named A, B, and C) to PNNL. However, the data for the fast-fill 50wt% LCF/PA66 edge-gated plaque exhibited unusual variations and could not be used for the model validation. Purdue will re-measure fiber orientation for this plaque. 7) Based on discussions with the University of Illinois Purdue explained the ambiguity in the measurements of the fiber orientation components. 8) PNNL discussed with team members to establish a go/no-go decision plan for the project and submitted the established plan to DOE. 9) PNNL performed ASMI mid-plane analyses for the fast-fill center-gated 30wt% LCF/PP and 50wt% LCF/PA66 plaques and compared the predicted fiber orientations with the measured data provided by Purdue at Locations A, B, and C on these plaques. 10) Based on discussions with the University of Illinois and Autodesk, PNNL proposed a procedure to adjust fiber orientation data for Location A of the center-gated plaques so that the data can be expressed and interpreted in the flow/cross-flow direction coordinate system. 11) PNNL tested the new ASMI version received from Autodesk, examined and discussed 3D fiber orientation predictions for PlastiComp plaques. 12) PlastiComp, Inc. (PlastiComp), Toyota Research Institute North America (Toyota) and Magna Exteriors and Interiors Corp. (Magna) participated in discussions with team members on the go/no-go plan and the issues related to fiber length measurements. Toyota continued the discussion with Magna on tool modification for molding the complex part in order to achieve the target fiber length in the part.« less

  12. Sexual orientations of women with polycystic ovary syndrome: clinical observation in Taiwan.

    PubMed

    Chen, Ching-Hui; Wang, Peng-Hui; Hsieh, Meng-Ti; Tzeng, Chii-Ruey; Wu, Yi-Hsuan; Lee, Chin-San; Chu, Yuan-Hsiang; Chang, Heng-Yu

    2014-12-01

    This study was conducted to explore the association between sexual orientations and polycystic ovary syndrome (PCOS)-related parameters. A cross-sectional study with participants recruited from the regular outpatient clinic at the Department of Obstetrics and Gynecology at Taipei Medical University Hospital, Taipei, Taiwan between July 2012 and December 2013 was carried out. A total of 97 women met the criterion of having been diagnosed with PCOS. Among these 97 women, 89 were heterosexuals and eight were self-identified as lesbians. At the same time, 78 women without PCOS were enrolled to serve as the control group. Participants were given a standard questionnaire and had blood withdrawn for biochemical analysis of androgen parameters--including total testosterone, androstenedione, sex hormone binding globulin, free androgen index, 17β-estradiol (E2), luteinizing hormone, and follicular-stimulating hormone. The biochemical data were measured to compare the PCOS clinical parameters present in people of different sexual orientations (lesbians and heterosexuals). The women with PCOS, regardless of sexual orientation, had higher percentages and serum levels of hyperandrogenism-related clinical parameters than the women without PCOS [acne (87.5% and 60.7% vs. 23.1%), p < 0.001]; hirsutism (62.5% and 57.3% vs. 15.4%, p ≤ 0.001)]; and biochemical parameters (total T, p < 0.05 or p < 0.001, and luteinizing hormone/follicular-stimulating hormone ratio, p ≤ 0.001]. The sexual orientation of women with PCOS affected their body mass index (BMI), because lesbians with PCOS possessed higher BMI than heterosexual women with PCOS (26.5 ± 1.9 vs. 22.5 ± 0.55; p < 0.05). However, hyperandrogenism-related clinical and biochemical parameters were not significantly different statistically between women with PCOS but of different sexual orientations. Our preliminary data showed that sexual orientation influenced the BMI of women with PCOS, but did not affect hyperandrogenism-related clinical or biochemical characteristics. This observation requires further confirmation. Copyright © 2014. Published by Elsevier B.V.

  13. Spirituality and sexual orientation: relationship to mental well-being and functional health status.

    PubMed

    Coleman, Christopher L

    2003-09-01

    Research has shown that spirituality has a positive effect on physical and mental health; however, few studies have explored the influence of spirituality and sexuality on mental well-being and functional health status in people with human immunodeficiency virus (HIV)/acquired immunodeficiency syndrome (AIDS). This descriptive cross-sectional study was designed to examine the relationships among spirituality, sexual orientation, mental well-being and aspects of functional health status (physical, role, social and cognitive functioning) in a sample of 117 African-American men and women living with HIV/AIDS. Spirituality was measured using the Spiritual Well-Being Scale. A demographic questionnaire gathered data on sexual orientation, age and gender. The Medical Outcomes Study Questionnaire-30 assessed aspects of functional health status and mental well-being. The HIV Symptom Checklist for Persons With HIV disease was used to collect data on HIV symptoms. The data were collected in 1996. The findings indicate that spirituality had a direct relationship with cognitive and social functioning and was inversely related to HIV symptoms. Sexual orientation had direct relationships with mental well-being, cognitive, physical, social and role functioning. t-Tests showed that heterosexual participants reported poorer mental well-being and functional health status compared with homosexual participants. Regression analysis showed that spirituality, sexual orientation, age and HIV symptoms contributed significantly to mental well-being and functional health status. The regression analysis showed that spirituality, sexual orientation, age and HIV symptoms contributed significantly to mental well-being and functional health status. Further research is needed to explore the various ways that sexual orientation influences health status findings in those with HIV disease in certain segments of the population. The findings support the inclusion of spirituality as a variable when examining mental well-being and physical health. Finally, given the limitations of the design, more rigorous methods should be employed to understand further the contribution of spirituality to the health status of African-Americans living with HIV, because of its social importance to this particular community.

  14. Synthesis and self-assembly of amphiphilic polymeric microparticles.

    PubMed

    Dendukuri, Dhananjay; Hatton, T Alan; Doyle, Patrick S

    2007-04-10

    We report the synthesis and self-assembly of amphiphilic, nonspherical, polymeric microparticles. Wedge-shaped particles bearing segregated hydrophilic and hydrophobic sections were synthesized in a microfludic channel by polymerizing across laminar coflowing streams of hydrophilic and hydrophobic polymers using continuous flow lithography (CFL). Particle monodispersity was characterized by measuring both the size of the particles formed and the extent of amphiphilicity. The coefficient of variation (COV) was found to be less than 2.5% in all measured dimensions. Particle structure was further characterized by measuring the curvature of the interface between the sections and the extent of cross-linking using FTIR spectroscopy. The amphiphilic particles were allowed to self-assemble in water or at water-oil interfaces. In water, the geometry of the particles enabled the formation of micelle-like structures, while in emulsions, the particles migrated to the oil-water interface and oriented themselves to minimize their surface energy.

  15. Feasibility of a web-based suicide awareness programme for Asian American college students.

    PubMed

    Choi, Heeseung; Park, Hanjong; Suarez, Marie L; Park, Chang; Zhao, Zhongsheng; Wilkie, Diana J

    2016-12-21

    The Truth about Suicide video has been widely used but has never been empirically tested regarding its cultural appropriateness for Asian Americans. The purpose of the study was to determine the feasibility of using the video in a web-based suicide awareness programme for Asian American and non-Hispanic white college students. A cross-sectional, comparative, web-based study was conducted with 227 Asian Americans and 204 non-Hispanic whites at a university in the Midwest region of the USA. Study participants completed a questionnaire measuring their cultural orientation and attitudes towards suicide, watched the 27 min video, completed a debriefing session and evaluated the video's overall suitability. Asian Americans rated the suicide awareness video significantly lower for cultural relevance than did non-Hispanic whites (F=5.479, p=0.02). Collectivist cultural orientation was a significant predictor for cultural relevance, credibility and appeal; however, evaluation of the video's cultural relevance was negatively affected by Asian ethnicity. Cultural orientation and race/ethnicity should be strongly considered when web-based suicide awareness programmes are developed for college students. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

  16. Prevalence of and disparities in HIV-related sexual risk behaviours among Chinese youth in relation to sexual orientation: a cross-sectional study.

    PubMed

    Guo, Chao; Zhang, Lei; Wang, Zhenjie; Chen, Gong; Zheng, Xiaoying

    2016-06-02

    Background: The aim of this study was to calculate the prevalence rate of HIV-related sexual risk behaviours (HSRB) among Chinese youth and determine whether there was an association between sexual orientation and HSRB. Methods: This study used a nationally representative survey of youth aged 15-24 years in China. Population numbers, prevalence, and proportions were calculated where appropriate. χ2 tests were used to determine the difference within categorical variables. Multivariate logistic regression was used to calculate the adjusted odd ratios (AOR) and 95% confidence interval (CI). Results: The rate of any HSRB among sexually active youth was 79.43%, and the most common HSRB was lack of condom use during the first sexual experience (66.02%). After adjusting for demographic and socioeconomic variables (sex, age, residence, living with parents or not, father's education and annual family income), non-heterosexual orientation was found to significantly increase the odds of HSRB (AOR = 2.42, 95% CI: 1.16-5.05). Conclusions: Non-heterosexual youth are at a higher risk of partaking in HSRB. The high prevalence of HSRB indicates the insufficiency of sex education for Chinese youth, especially for non-heterosexual youth. Greater efforts should be made to increase reproductive and sexual health services for Chinese youth.

  17. Goal setting practice in chronic low back pain. What is current practice and is it affected by beliefs and attitudes?

    PubMed

    Gardner, Tania; Refshauge, Kathryn; McAuley, James; Hübscher, Markus; Goodall, Stephen; Smith, Lorraine

    2018-01-18

    Goal setting, led by the patient, is promising as an effective treatment for the management of chronic low back pain (CLBP); however, little is known about current practice. The aims of the study were to explore (1) current goal setting practice in CLBP among physiotherapists; (2) perceived barriers to goal setting in CLBP; and (3) relationship between clinician's attitudes and beliefs and goal setting practice. A cross-sectional observational survey. The majority of respondents used goal setting with the main aim of facilitating self-management. The greatest number of goals were set with 50% therapist/50% patient involvement. The most common perceived barriers to goal setting related to time constraints and lack of skill and confidence. A higher biomedical score for treatment orientation of the therapist was associated with a lower patient involvement score. Goal setting is common practice for CLBP and is perceived as a high priority. It is more often a collaboration between therapist and patient rather than patient-led with treatment orientation of the physiotherapist a predictor of patient involvement. Education of healthcare professionals needs to include better understanding of chronic pain to orient them away from a biomedical treatment approach, as well as to enhance skills in facilitating patient involvement in goal setting.

  18. Factors associated with family-centered involvement in family practice--a cross-sectional multivariate analysis.

    PubMed

    Deutsch, Tobias; Frese, Thomas; Sandholzer, Hagen

    2014-01-01

    The importance of a family-centered approach in family practice has been emphasized. Knowledge about factors associated with higher family-centered involvement seems beneficial to stimulate its realization. German office-based family physicians completed a questionnaire addressing several aspects of family-centered care. Logistic regression was used to identify associations with the involvement overall and in different domains: routine inquiry and documentation of family-related information, family orientation regarding diagnosis and treatment, family-oriented dialogues, family conferences, and case-related collaboration with marriage and family therapists. We found significant associations between physicians' family-centered involvement and expected patient receptiveness, perceived impact of the family's influence on health, self-perceived psychosocial family-care competences (overall and concerning concepts for family orientation, psychosocial intervention in family conferences, and the communication of the idea of family counseling), advanced training in psychosocial primary care (PPC), personal acquaintance with family therapists (regarding case-related collaboration), and rural office environment. Increased emphasis on the family's influence on health in medical education and training, the provision of concepts for a family-centered perspective, and versatile skills for psychosocial intervention and inquiry of patient preferences, as well as the strengthening of networking between family physicians and family therapists, might promote the family-centered approach in family practice.

  19. Factors associated with self-reported discrimination against men who have sex with men in Brazil

    PubMed Central

    Magno, Laio; Dourado, Inês; da Silva, Luís Augusto V; Brignol, Sandra; de Brito, Ana Maria; Guimarães, Mark Drew Crosland; Benzaken, Adele; Pinho, Adriana de A; Kendall, Carl; Kerr, Ligia Regina Franco Sansigolo

    2017-01-01

    ABSTRACT OBJECTIVE To estimate self-reported discrimination due to sexual orientation among men who have sex with men (MSM) in Brazil and to analyze associated factors. METHODS A cross-sectional study of 3,859 MSM recruited in 2008–2009 with respondent driven sampling. Data collection conducted in health centers in 10 Brazilian cities. A face-to-face questionnaire was used and rapid HIV and syphilis tests conducted. Aggregated data were weighted and adjusted odds ratio estimated to measure the association between selected factors and self-reported discrimination due to sexual orientation. RESULTS The sample was predominantly young, eight plus years of schooling, pardo (brown), single, low-income, and identified themselves as gay or homosexual. The prevalence of self-reported discrimination due to sexual orientation was 27.7% (95%CI 26.2–29.1). Discrimination was independently associated with: age < 30 years, more years of schooling, community involvement and support, history of sexual and physical violence, suicidal thoughts, and unprotected receptive anal intercourse. CONCLUSIONS The prevalence of self-reported discrimination among MSM in Brazil is high. These results challenge the assumptions that MSM-specific prevention and support programs are not required or that health professionals do not need special training to address MSM needs. PMID:29166436

  20. Impact of P/In flux ratio and epilayer thickness on faceting for nanoscale selective area growth of InP by molecular beam epitaxy.

    PubMed

    Fahed, M; Desplanque, L; Coinon, C; Troadec, D; Wallart, X

    2015-07-24

    The impact of the P/In flux ratio and the deposited thickness on the faceting of InP nanostructures selectively grown by molecular beam epitaxy (MBE) is reported. Homoepitaxial growth of InP is performed inside 200 nm wide stripe openings oriented either along a [110] or [1-10] azimuth in a 10 nm thick SiO2 film deposited on an InP(001) substrate. When varying the P/In flux ratio, no major shape differences are observed for [1-10]-oriented apertures. On the other hand, the InP nanostructure cross sections strongly evolve for [110]-oriented apertures for which (111)B facets are more prominent and (001) ones shrink for large P/In flux ratio values. These results show that the growth conditions allow tailoring the nanocrystal shape. They are discussed in the framework of the equilibrium crystal shape model using existing theoretical calculations of the surface energies of different low-index InP surfaces as a function of the phosphorus chemical potential, directly related to the P/In ratio. Experimental observations strongly suggest that the relative (111)A surface energy is probably smaller than the calculated value. We also discuss the evolution of the nanostructure shape with the InP-deposited thickness.

  1. Orbital Debris Shape and Orientation Effects on Impact Damage to Shuttle Tiles

    NASA Technical Reports Server (NTRS)

    Evans, Steven W.; Williamsen, Joel

    2006-01-01

    Taking the damage results from a previous paper as a guide, and using a tile model created for the STS-107 accident investigation, we used the SPHC hydrodynamic code to evaluate the probable worst-case impact effects of flat, rectangular, "flake-shaped," orbital debris particles on Space Shuttle thermal tiles. We compared the damage from flakes with that produced by spheres. The flakes and spheres were sized according to a "characteristic length" (Lc) derived from radar cross-section measurements, and embodied in the NASA Standard Breakup Model (SBM). Impacts were simulated at near-normal obliquity, at 12 km/sec. We modeled the worst-case flake orientation: a corner-on impact, an orientation we term a "Face A-B" impact. Results of our simulations indicate that flake impactors are less damaging than spheres of the same Lc. Since spherical impactors have been assumed in analyses of shuttle orbital debris impact risk, we find that these risks may have been overestimated. This work represents a preliminary second step, i.e., a follow-on to [1], in developing a sensitivity analysis for the expected range of effects on damage considering spherical vs. non-spherical impactors, as recommended by the Institute for Defense Analyses (IDA) report to the Columbia Accident Investigation Board.

  2. Culvert Analysis Program Graphical User Interface 1.0--A preprocessing and postprocessing tool for estimating flow through culvert

    USGS Publications Warehouse

    Bradley, D. Nathan

    2013-01-01

    The peak discharge of a flood can be estimated from the elevation of high-water marks near the inlet and outlet of a culvert after the flood has occurred. This type of discharge estimate is called an “indirect measurement” because it relies on evidence left behind by the flood, such as high-water marks on trees or buildings. When combined with the cross-sectional geometry of the channel upstream from the culvert and the culvert size, shape, roughness, and orientation, the high-water marks define a water-surface profile that can be used to estimate the peak discharge by using the methods described by Bodhaine (1968). This type of measurement is in contrast to a “direct” measurement of discharge made during the flood where cross-sectional area is measured and a current meter or acoustic equipment is used to measure the water velocity. When a direct discharge measurement cannot be made at a streamgage during high flows because of logistics or safety reasons, an indirect measurement of a peak discharge is useful for defining the high-flow section of the stage-discharge relation (rating curve) at the streamgage, resulting in more accurate computation of high flows. The Culvert Analysis Program (CAP) (Fulford, 1998) is a command-line program written in Fortran for computing peak discharges and culvert rating surfaces or curves. CAP reads input data from a formatted text file and prints results to another formatted text file. Preparing and correctly formatting the input file may be time-consuming and prone to errors. This document describes the CAP graphical user interface (GUI)—a modern, cross-platform, menu-driven application that prepares the CAP input file, executes the program, and helps the user interpret the output

  3. Pluto's Atmospheric Figure from the P131.1 Stellar Occultation

    NASA Astrophysics Data System (ADS)

    Person, M. J.; Elliot, J. L.; Clancy, K. B.; Kern, S. D.; Salyk, C. V.; Tholen, D. J.; Pasachoff, J. M.; Babcock, B. A.; Souza, S. P.; Ticehurst, D. R.; Hall, D.; Roberts, L. C., Jr.; Bosh, A. S.; Buie, M. W.; Dunham, E. W.; Olkin, C. B.; Taylor, B.; Levine, S. E.; Eikenberry, S. S.; Moon, D.-S.; Osip, D. J.

    2003-05-01

    The stellar occultation by Pluto of the 15th magnitude star designated P131.1 (McDonald and Elliot, AJ, 119, 1999) on 2002 August 21 (UT) provided the first significant chance to compare Pluto's atmospheric structure to that determined from the 1988 occultation of P8 (Millis, et al., Icarus, 105, 282). The P131.1 occultation was observed from several stations in Hawaii and the western United States (Elliot et al., Nature, in press, 2003). Numerous occultation chords were obtained enabling us to examine Pluto's atmospheric figure. The light curves from the observations were analyzed together in the occultation coordinate system of Elliot et al., (AJ, 106, 2544). The Mauna Kea and Lick datasets straddle the center of Pluto's figure, providing strong constraints on model fits to cross sections of the atmospheric shape. In 1988, Millis (et al., Icarus, 105, 282) did not report any deviation from sphericity in Pluto's atmospheric figure. From the 2002 data, Pluto;s isobars at the radii probed by the occultation ( 1250 km) appear to be distorted from a circular cross-section. Least-squares fits to this cross-section by elliptical models reveal ellipticities in the range 0.05-0.08 although the shape may be more complex than ellipsoidal. The orientation of the distortion appears uncorrelated with Pluto;s rotational axis. Taken at face value, this ellipticity could imply wind speeds of up to twice the sonic speed ( 200 m/s), which would be difficult to explain. Similar distortions have been reported for Triton's atmosphere (Elliot, J. L., et al., Icarus 148, 347). This work has been supported in part by Research Corporation, the Air Force Research Laboratory, NSF, and NASA.

  4. Predictors of cognitive impairment assessed by Mini Mental State Examination in community-dwelling older adults: relevance of the step test.

    PubMed

    Muscari, Antonio; Spiller, Ilaria; Bianchi, Giampaolo; Fabbri, Elisa; Forti, Paola; Magalotti, Donatella; Pandolfi, Paolo; Zoli, Marco

    2018-07-15

    Several predictors of cognitive impairment assessed by Mini Mental State Examination (MMSE) have previously been identified. However, which predictors are the most relevant and what is their effect on MMSE categories remains unclear. Cross-sectional and longitudinal study using data from 1116 older adults (72.6 ± 5.6 years, 579 female), 350 of whom were followed for 7 years. At baseline, the following variables were collected: personal data, marital status, occupation, anthropometric measures, risk factors, previous cardiovascular events, self-rated health and physical activity during the last week. Furthermore, routine laboratory tests, abdominal echography and a step test (with measurement of the time needed to ascend and descend two steps 20 times) were performed. The associations of these variables with cross-sectional cognitive deficit (MMSE < 24) and longitudinal cognitive decline (decrease of MMSE score over 7 years of follow-up) were investigated using logistic regression models. Cross-sectional cognitive deficit was independently associated with school education ≤ 5 years, prolonged step test duration, having been blue collar or housewife (P ≤ 0.0001 for all) and, with lower significance, with advanced age, previous stroke and poor recent physical activity (P < 0.05). Longitudinal cognitive decline was mainly associated with step test duration (P = 0.0001) and diastolic blood pressure (P = 0.0002). The MMSE categories mostly associated with step test duration were orientation, attention, calculation and language, while memory appeared to be poorly or not affected. In our cohort of older adults, step test duration was the most relevant predictor of cognitive impairment. Copyright © 2018 Elsevier Inc. All rights reserved.

  5. Leading non-Gaussian corrections for diffusion orientation distribution function.

    PubMed

    Jensen, Jens H; Helpern, Joseph A; Tabesh, Ali

    2014-02-01

    An analytical representation of the leading non-Gaussian corrections for a class of diffusion orientation distribution functions (dODFs) is presented. This formula is constructed from the diffusion and diffusional kurtosis tensors, both of which may be estimated with diffusional kurtosis imaging (DKI). By incorporating model-independent non-Gaussian diffusion effects, it improves on the Gaussian approximation used in diffusion tensor imaging (DTI). This analytical representation therefore provides a natural foundation for DKI-based white matter fiber tractography, which has potential advantages over conventional DTI-based fiber tractography in generating more accurate predictions for the orientations of fiber bundles and in being able to directly resolve intra-voxel fiber crossings. The formula is illustrated with numerical simulations for a two-compartment model of fiber crossings and for human brain data. These results indicate that the inclusion of the leading non-Gaussian corrections can significantly affect fiber tractography in white matter regions, such as the centrum semiovale, where fiber crossings are common. 2013 John Wiley & Sons, Ltd.

  6. Leading Non-Gaussian Corrections for Diffusion Orientation Distribution Function

    PubMed Central

    Jensen, Jens H.; Helpern, Joseph A.; Tabesh, Ali

    2014-01-01

    An analytical representation of the leading non-Gaussian corrections for a class of diffusion orientation distribution functions (dODFs) is presented. This formula is constructed out of the diffusion and diffusional kurtosis tensors, both of which may be estimated with diffusional kurtosis imaging (DKI). By incorporating model-independent non-Gaussian diffusion effects, it improves upon the Gaussian approximation used in diffusion tensor imaging (DTI). This analytical representation therefore provides a natural foundation for DKI-based white matter fiber tractography, which has potential advantages over conventional DTI-based fiber tractography in generating more accurate predictions for the orientations of fiber bundles and in being able to directly resolve intra-voxel fiber crossings. The formula is illustrated with numerical simulations for a two-compartment model of fiber crossings and for human brain data. These results indicate that the inclusion of the leading non-Gaussian corrections can significantly affect fiber tractography in white matter regions, such as the centrum semiovale, where fiber crossings are common. PMID:24738143

  7. Transmission Electron Microscopy of Bombyx Mori Silk Fibers

    NASA Astrophysics Data System (ADS)

    Shen, Y.; Martin, D. C.

    1997-03-01

    The microstructure of B. Mori silk fibers before and after degumming was examined by TEM, selected area electron diffraction (SAED), WAXS and low voltage SEM. SEM micrographs of the neat cocoon revealed a network of pairs of twisting filaments. After degumming, there were only individual filaments showing a surface texture consistent with an oriented fibrillar structure in the fiber interior. WAXS patterns confirmed the oriented beta-sheet crystal structure common to silkworm and spider silks. Low dose SAED results were fully consistent with the WAXS data, and revealed that the crystallographic texture did not vary significantly across the fiber diameter. TEM observations of microtomed fiber cross sections indicated a somewhat irregular shape, and also revealed a 0.5-2 micron sericin coating which was removed by the degumming process. TEM observations of the degummed silk fiber showed banded features with a characteristic spacing of nominally 600 nm along the fiber axis. These bands were oriented in a roughly parabolic or V-shape pointing along one axis within a given fiber. We hypothesize that this orientation is induced by the extrusion during the spinning process. Equatorial DF images revealed that axial and lateral sizes of the β-sheet crystallites in silk fibroin ranged from 20 to 170 nm and from 1 to 24 nm, respectively. Crazes developed in the degummed silk fiber parallel to the fiber direction. The formation of these crazes suggests that there are significant lateral interactions between fibrils in silk fibers.

  8. Essentialist beliefs, sexual identity uncertainty, internalized homonegativity and psychological wellbeing in gay men.

    PubMed

    Morandini, James S; Blaszczynski, Alexander; Ross, Michael W; Costa, Daniel S J; Dar-Nimrod, Ilan

    2015-07-01

    The present study examined essentialist beliefs about sexual orientation and their implications for sexual identity uncertainty, internalized homonegativity and psychological wellbeing in a sample of gay men. A combination of targeted sampling and snowball strategies were used to recruit 639 gay identifying men for a cross-sectional online survey. Participants completed a questionnaire assessing sexual orientation beliefs, sexual identity uncertainty, internalized homonegativity, and psychological wellbeing outcomes. Structural equation modeling was used to test whether essentialist beliefs were associated with psychological wellbeing indirectly via their effect on sexual identity uncertainty and internalized homonegativity. A unique pattern of direct and indirect effects was observed in which facets of essentialism predicted sexual identity uncertainty, internalized homonegativity and psychological wellbeing. Of note, viewing sexual orientation as immutable/biologically based and as existing in discrete categories, were associated with less sexual identity uncertainty. On the other hand, these beliefs had divergent relationships with internalized homonegativity, with immutability/biological beliefs associated with lower, and discreteness beliefs associated with greater internalized homonegativity. Of interest, although sexual identity uncertainty was associated with poorer psychological wellbeing via its contribution to internalized homophobia, there was no direct relationship between identity uncertainty and psychological wellbeing. Findings indicate that essentializing sexual orientation has mixed implications for sexual identity uncertainty and internalized homonegativity and wellbeing in gay men. Those undertaking educational and clinical interventions with gay men should be aware of the benefits and of caveats of essentialist theories of homosexuality for this population. (c) 2015 APA, all rights reserved).

  9. Presenting the Students’ Academic Achievement Causal Model based on Goal Orientation

    PubMed Central

    NASIRI, EBRAHIM; POUR-SAFAR, ALI; TAHERI, MAHDOKHT; SEDIGHI PASHAKY, ABDULLAH; ASADI LOUYEH, ATAOLLAH

    2017-01-01

    Introduction: Several factors play a role in academic achievement, individual's excellence and capability to do actions and tasks that the learner is in charge of in learning areas. The main goal of this study was to present academic achievement causal model based on the dimensions of goal orientation and learning approaches among the students of Medical Science and Dentistry courses in Guilan University of Medical Sciences in 2013. Methods: This study is based on a cross-sectional model. The participants included 175 first and second students of the Medical and Dentistry schools in Guilan University of Medical Sciences selected by random cluster sampling [121 persons (69%) Medical Basic Science students and 54 (30.9%) Dentistry students]. The measurement tool included the Goal Orientation Scale of Bouffard and Study Process Questionnaire of Biggs) and the students’ Grade Point Average. The study data were analyzed using Pearson correlation coefficient and structural equations modeling. SPSS 14 and Amos were used to analyze the data. Results: The results indicated a significant relationship between goal orientation and learning strategies (P<0.05). In addition, the results revealed that a significant relationship exists between learning strategies[Deep Learning (r=0.37, P<0.05), Surface Learning (r=-0.21,P<0.05)], and academic achievement.The suggested model of research is fitted to the data of the research. Conclusion: Results showed that the students' academic achievement model fits with experimental data, so it can be used in learning principles which lead to students’ achievement in learning. PMID:28979914

  10. Collagen Fiber Orientation in Primate Long Bones.

    PubMed

    Warshaw, Johanna; Bromage, Timothy G; Terranova, Carl J; Enlow, Donald H

    2017-07-01

    Studies of variation in orientation of collagen fibers within bone have lead to the proposition that these are preferentially aligned to accommodate different kinds of load, with tension best resisted by fibers aligned longitudinally relative to the load, and compression best resisted by transversely aligned fibers. However, previous studies have often neglected to consider the effect of developmental processes, including constraints on collagen fiber orientation (CFO), particularly in primary bone. Here we use circularly polarized light microscopy to examine patterns of CFO in cross-sections from the midshaft femur, humerus, tibia, radius, and ulna in a range of living primate taxa with varied body sizes, phylogenetic relationships and positional behaviors. We find that a preponderance of longitudinally oriented collagen is characteristic of both periosteal primary and intracortically remodeled bone. Where variation does occur among groups, it is not simply understood via interpretations of mechanical loads, although prioritized adaptations to tension and/or shear are considered. While there is some suggestion that CFO may correlate with body size, this relationship is neither consistent nor easily explicable through consideration of size-related changes in mechanical adaptation. The results of our study indicate that there is no clear relationship between CFO and phylogenetic status. One of the principle factors accounting for the range of variation that does exist is primary tissue type, where slower depositing bone is more likely to comprise a larger proportion of oblique to transverse collagen fibers. Anat Rec, 300:1189-1207, 2017. © 2017 Wiley Periodicals, Inc. © 2017 Wiley Periodicals, Inc.

  11. Apparent Fibre Density: a novel measure for the analysis of diffusion-weighted magnetic resonance images.

    PubMed

    Raffelt, David; Tournier, J-Donald; Rose, Stephen; Ridgway, Gerard R; Henderson, Robert; Crozier, Stuart; Salvado, Olivier; Connelly, Alan

    2012-02-15

    This article proposes a new measure called Apparent Fibre Density (AFD) for the analysis of high angular resolution diffusion-weighted images using higher-order information provided by fibre orientation distributions (FODs) computed using spherical deconvolution. AFD has the potential to provide specific information regarding differences between populations by identifying not only the location, but also the orientations along which differences exist. In this work, analytical and numerical Monte-Carlo simulations are used to support the use of the FOD amplitude as a quantitative measure (i.e. AFD) for population and longitudinal analysis. To perform robust voxel-based analysis of AFD, we present and evaluate a novel method to modulate the FOD to account for changes in fibre bundle cross-sectional area that occur during spatial normalisation. We then describe a novel approach for statistical analysis of AFD that uses cluster-based inference of differences extended throughout space and orientation. Finally, we demonstrate the capability of the proposed method by performing voxel-based AFD comparisons between a group of Motor Neurone Disease patients and healthy control subjects. A significant decrease in AFD was detected along voxels and orientations corresponding to both the corticospinal tract and corpus callosal fibres that connect the primary motor cortices. In addition to corroborating previous findings in MND, this study demonstrates the clear advantage of using this type of analysis by identifying differences along single fibre bundles in regions containing multiple fibre populations. Copyright © 2011 Elsevier Inc. All rights reserved.

  12. Measurements and Quasi-Quantum Modeling of the Steric Asymmetry and Parity Propensities in State-to-State Rotationally Inelastic Scattering of NO ( 2Π 1/2) with D 2

    DOE PAGES

    Taatjes, Craig A.; Gijsbertsen, Arjan; de Lange, Marc J. L.; ...

    2007-06-02

    In this paper, relative integrated cross sections are measured for spin-orbit-conserving, rotationally inelastic scattering of NO ( 2Π 1/2), hexapole-selected in the upper Λ-doublet level of the ground rotational state (j = 0.5), in collisions with D 2 at a nominal energy of 551 cm -1. The final state of the NO molecule is detected by laser-induced fluorescence (LIF). The state-selected NO molecule is oriented with either the N end or the O end toward the incoming D 2 molecule by application of a static electric field E in the scattering region. This field is directed parallel or antiparallel tomore » the relative velocity vector v. Comparison of signals taken for the different applied field directions gives the experimental steric asymmetry SA, defined by SA = (σ v↑↓E - σ v↑↑E)/(σ v↑↓E + σ v↑↑E), which is equal to within a factor of -1 to the molecular steric effect, S i→f ≡ (σ D2→NO - σ D2→ON)/(σ D2→NO + σ D2→ON). The dependence of the integral inelastic cross section on the incoming Λ-doublet component is also measured as a function of the final rotational (j final) and Λ-doublet (ε final) state. The measured steric asymmetries are similar to those previously observed for NO-He scattering. Spin-orbit manifold-conserving collisions exhibit a larger propensity for parity conservation than their NO-He counterparts. The results are interpreted in the context of the recently developed quasi-quantum treatment (QQT) of rotationally inelastic scattering. The QQT predictions can be inverted to obtain a fitted hard-shell potential that reproduces the experimental steric asymmetry; this fitted potential gives an empirical estimate of the anisotropy of the repulsive interaction between NO and D 2. Finally, QQT computation of the differential cross section using this simple model potential shows reasonable agreement with the measured differential cross sections.« less

  13. Balancing cross-sections combining field work and remote sensing data using LithoTect software in the Zagros fold-and-thrust belt, N Iraq.

    NASA Astrophysics Data System (ADS)

    Reif, Daniel; Grasemann, Bernhard; Lockhart, Duncan

    2010-05-01

    The Zagros fold-and-thrust belt has formed in detached Phanerozoic sedimentary cover rocks above a shortened crystalline Precambrian basement and evolved through the Late Cretaceous to Miocene collision between the Arabian and Eurasian plate, during which the Neotethys oceanic basin was closed. Deformation is partitioned in SW directed folding and thrusting of the sediments and NW-SE to N-S trending dextral strike slip faults. The sub-cylindrical doubly-plunging fold trains with wavelengths of 5 - 10 km host more than half of the world's hydrocarbon reserves in mostly anticlinal traps. Generally the Zagros is divided into three NW-SE striking tectonic units: the Zagros Imbricate Zone, the Zagros Simply Folded Belt and the Zagros Foredeep. This work presents a balanced cross-section through the Simply Folded Belt, NE of the city of Erbil (Kurdistan, Iraq). The regional stratigraphy comprises mainly Cretaceous to Cenozoic folded sediments consisting of massive, carbonate rocks (limestones, dolomites), reacting as competent layers during folding compared to the incompetent behavior of interlayered siltstones, claystones and marls. Although the overall security situation in Kurdistan is much better than in the rest of Iraq, structural field mapping was restricted to asphalt streets, mainly because of the contamination of the area with landmines and unexploded ordnance. In order to extend the structural measurements statistically over the investigated area, we used a newly developed software tool (www.terramath.com) for interactive structural mapping of spatial orientations (i.e. dip direction and dip angles) of the sedimentary beddings from digital elevation models. Structural field data and computed measurements where integrated and projected in NE-SW striking balanced cross-sections perpendicular to the regional trend of the fold axes. We used the software LithoTect (www.geologicsystems.com) for the restoration of the cross-sections. Depending on the interpretation of the shape of the synclines, which are not exposed and covered by Neogene sediments, the shortening is in the order of 10-20%. The restoration confirms that large scale faulting is only of minor importance in the Simply Folded Belt.

  14. Nuclear polarization effects in big bang nucleosynthesis

    NASA Astrophysics Data System (ADS)

    Voronchev, Victor T.; Nakao, Yasuyuki

    2015-10-01

    A standard nuclear reaction network for big bang nucleosynthesis (BBN) simulations operates with spin-averaged nuclear inputs—unpolarized reaction cross sections. At the same time, the major part of reactions controlling the abundances of light elements is spin dependent, i.e., their cross sections depend on the mutual orientation of reacting particle spins. Primordial magnetic fields in the BBN epoch may to a certain degree polarize particles and thereby affect some reactions between them, introducing uncertainties in standard BBN predictions. To clarify the points, we have examined the effects of induced polarization on key BBN reactions—p (n ,γ )d , d (d ,p )t , d (d ,n )He 3 , t (d ,n )α , He 3 (n ,p )t , He 3 (d ,p )α , Li 7 (p ,α )α , Be 7 (n ,p )Li 7 —and the abundances of elements with A ≤7 . It has been obtained that the magnetic field with the strength B0≤1012 G (at the temperature of 109 K ) has almost no effect on the reaction cross sections, and the spin polarization mechanism plays a minor role in the element production, changing the abundances at most by 0.01%. However, if the magnetic field B0 reaches 1015 G its effect on the key reactions appears and becomes appreciable at B0≳1016 G . In particular, it has been found that such a field can increase the p (n ,γ )d cross section (relevant to the starting point of BBN) by a factor of 2 and at the same time almost block the He 3 (n ,p )t reaction responsible for the interconversion of A =3 nuclei in the early Universe. This suggests that the spin polarization effects may become important in nonstandard scenarios of BBN considering the existence of local magnetic bubbles inside which the field can reach ˜1015 G .

  15. Building a viable decollement geometry for the Central Nepal Himalaya through integrating surface geology, thermochronology and data from the 2015 Gorkha Earthquake

    NASA Astrophysics Data System (ADS)

    Ghoshal, S.; McQuarrie, N.; Robinson, D. M.; Olree, E.; Valentino, C.; Olsen, J.

    2017-12-01

    Recent field mapping in the Central Himalaya revealed a marked change in the location and orientation of exposed Greater Himalayan rocks around the epicenter of the April 2015 Gorkha earthquake, arguing for a lateral structure in the Main Himalayan Thrust (MHT). The earthquake provided new insight into the geometry of the MHT, but left the position and depth of the mid-crustal ramp in dispute. Combining new field data with existing thermochronometric data from the region emphasizes that both the mapped geology and young cooling ages step abruptly southward from east to west, immediately adjacent to the earthquake epicenter. The distribution of cooling ages is strongly influenced by the location of ramps in the decollement surface, as the vertical component of uplift concentrates exhumation over the ramp, producing the youngest ages there. We propose that the existence and location of frontal and lateral ramps can be evaluated using the regional distribution of thermochronometric ages. Sequentially deformed cross-sections present a model of how structurally induced uplift varies in time and space, as well as a predicted geometry of the active, modern fault. We created new balanced cross-sections, constrained by surface geology and the proposed decollement geometries. For an accurate representation of the subsurface, the geometries must reproduce cooling ages measured at the surface. Each cross section was sequentially deformed, allowing for flexure and erosion. The resulting displacement field was used to predict cooling ages for muscovite 40Ar/39Ar, zircon (U-Th)/He, and apatite fission-track, using the thermokinematic model Pecube. The different closure temperatures for these systems allow them to represent different times and locations of exhumation driven by evolving fault geometries. The modeled cooling ages are the cumulative effect of the entire deformational sequence. However, the ages are particularly sensitive to the modern active decollement fault geometry, allowing us to evaluate the different proposed cross-section geometries, and identify the best match to the regional distribution of cooling ages. We argue that this final geometry is the most accurate representation of the subsurface, being constrained by surface geology, thermochronological ages, and data from the earthquake.

  16. Optical properties of large amyloid spherulites

    NASA Astrophysics Data System (ADS)

    Smith, Michael; Sharp, James

    2012-02-01

    Amyloid Spherulites, consisting of a central core surrounded by radially oriented birefringent fibres (known as amyloid fibrils), have been found to occur in certain pathologies, such as Alzheimer's disease. Typically ˜5 30 m in diameter they can be observed by optical microscopy and easily distinguished by their characteristic maltese cross pattern, seen when viewed under crossed polarisers. Here we report the existence of much larger amyloid spherulites formed from bovine insulin, which grow under a particular set of conditions (10 mgml-1 BPI, pH ˜2.8, T ˜67^oC, 25mM NaCl) to diameters of up to ˜500 m. These huge spherulites when viewed under crossed polarisers in addition to the maltese cross feature beautiful coloured rings which change with the size and density of the spherulite. Such rings have been observed in other systems such as fish eye lenses and nematic liquid crystal drops and appear to be related to the rather unusual radially oriented birefringence of their internal structure. Using a ray tracing technique we model the optical path of rays through these spherulites. Taking into account refraction and the radially oriented birefringence of the amyloid fibrils, we elucidate the origin of these beautiful patterns.

  17. An ab initio study of ion induced charge transfer dynamics in collision of carbon ions with thymine.

    PubMed

    Bacchus-Montabonel, Marie-Christine; Tergiman, Yvette Suzanne

    2011-05-28

    Charge transfer in collisions of carbon ions on a thymine target has been studied theoretically in a wide collision range by means of ab initio quantum chemistry molecular methods. The process appears markedly anisotropic in the whole energy domain, significantly favoured in the perpendicular orientation. A specific decrease of the charge transfer cross sections at low collision energies may be pointed out and could induce an enhancement of the complementary fragmentation processes for collision energies down to about 10 eV, as observed for the low-electron fragmentation process. Such feature may be of important interest in ion-induced biomolecular radiation damage. This journal is © the Owner Societies 2011

  18. Origin of storm footprints on the sea seen by synthetic aperture radar.

    PubMed

    Atlas, D

    1994-11-25

    Spaceborne synthetic aperture radar can detect storm footprints on the sea. Coastal weather radar from Cape Hatteras provides evidence that the echo-free hole at the footprint core is the result of wave damping by rain. The increased radar cross section of the sea surrounding the echo-free hole results from the divergence of the precipitation-forced downdraft impacting the sea. The footprint boundary is the gust front; its oriention is aligned with the direction of the winds aloft, which are transported down with the downdraft, and its length implies downdraft impact 1 hour earlier at a quasi-stationary impact spot. The steady, localized nature of the storm remains a mystery.

  19. A NASA Spaceliner 100 Propulsion Oriented Technology Assessment

    NASA Technical Reports Server (NTRS)

    Dankhoff, W.; Dayton, K.; Levack, D.; Odom, P.; Rhodes, R.; Robinson, J.

    2000-01-01

    In response to a NASA request, the National Space Propulsion Synergy Team (SPST) team agreed to provide technical and programmatic support to NASA in formulating a Spaceliner 100 Technology Program. The SPST offered a broad cross-section of expertise and experience. Its membership consists of senior level, volunteer representatives from across government, industry, and academia. The purpose of this paper is to provide a summary of the SPST support of SL100, which culminated in a propulsion technologies assessment and prioritization workshop conducted at MSFC. The results of this workshop and the follow-up analysis are part of this report. Also included, is a review of some "lessons learned" that were solicited from the workshop participants.

  20. Interface amorphization in hexagonal boron nitride films on sapphire substrate grown by metalorganic vapor phase epitaxy

    NASA Astrophysics Data System (ADS)

    Yang, Xu; Nitta, Shugo; Pristovsek, Markus; Liu, Yuhuai; Nagamatsu, Kentaro; Kushimoto, Maki; Honda, Yoshio; Amano, Hiroshi

    2018-05-01

    Hexagonal boron nitride (h-BN) films directly grown on c-plane sapphire substrates by pulsed-mode metalorganic vapor phase epitaxy exhibit an interlayer for growth temperatures above 1200 °C. Cross-sectional transmission electron microscopy shows that this interlayer is amorphous, while the crystalline h-BN layer above has a distinct orientational relationship with the sapphire substrate. Electron energy loss spectroscopy shows the energy-loss peaks of B and N in both the amorphous interlayer and the overlying crystalline h-BN layer, while Al and O signals are also seen in the amorphous interlayer. Thus, the interlayer forms during h-BN growth through the decomposition of the sapphire at elevated temperatures.

Some links on this page may take you to non-federal websites. Their policies may differ from this site.
Top