NASA Astrophysics Data System (ADS)
Motaghedi-Larijani, Arash; Aminnayeri, Majid
2017-03-01
Cross-docking is a supply-chain strategy that can reduce transportation and inventory costs. This study is motivated by a fruit and vegetable distribution centre in Tehran, which has cross-docks and a limited time to admit outbound trucks. In this article, outbound trucks are assumed to arrive at the cross-dock with a single outbound door with a uniform distribution (0,L). The total number of assigned trucks is constant and the loading time is fixed. A queuing model is modified for this situation and the expected waiting time of each customer is calculated. Then, a curve for the waiting time is calculated. Finally, the length of window time L is optimized to minimize the total cost, which includes the waiting time of the trucks and the admission cost of the cross-dock. Some illustrative examples of cross-docking are presented and solved using the proposed method.
Lessons in molecular recognition. 2. Assessing and improving cross-docking accuracy.
Sutherland, Jeffrey J; Nandigam, Ravi K; Erickson, Jon A; Vieth, Michal
2007-01-01
Docking methods are used to predict the manner in which a ligand binds to a protein receptor. Many studies have assessed the success rate of programs in self-docking tests, whereby a ligand is docked into the protein structure from which it was extracted. Cross-docking, or using a protein structure from a complex containing a different ligand, provides a more realistic assessment of a docking program's ability to reproduce X-ray results. In this work, cross-docking was performed with CDocker, Fred, and Rocs using multiple X-ray structures for eight proteins (two kinases, one nuclear hormone receptor, one serine protease, two metalloproteases, and two phosphodiesterases). While average cross-docking accuracy is not encouraging, it is shown that using the protein structure from the complex that contains the bound ligand most similar to the docked ligand increases docking accuracy for all methods ("similarity selection"). Identifying the most successful protein conformer ("best selection") and similarity selection substantially reduce the difference between self-docking and average cross-docking accuracy. We identify universal predictors of docking accuracy (i.e., showing consistent behavior across most protein-method combinations), and show that models for predicting docking accuracy built using these parameters can be used to select the most appropriate docking method.
NASA Astrophysics Data System (ADS)
Baniamerian, Ali; Bashiri, Mahdi; Zabihi, Fahime
2018-03-01
Cross-docking is a new warehousing policy in logistics which is widely used all over the world and attracts many researchers attention to study about in last decade. In the literature, economic aspects has been often studied, while one of the most significant factors for being successful in the competitive global market is improving quality of customer servicing and focusing on customer satisfaction. In this paper, we introduce a vehicle routing and scheduling problem with cross-docking and time windows in a three-echelon supply chain that considers customer satisfaction. A set of homogeneous vehicles collect products from suppliers and after consolidation process in the cross-dock, immediately deliver them to customers. A mixed integer linear programming model is presented for this problem to minimize transportation cost and early/tardy deliveries with scheduling of inbound and outbound vehicles to increase customer satisfaction. A two phase genetic algorithm (GA) is developed for the problem. For investigating the performance of the algorithm, it was compared with exact and lower bound solutions in small and large-size instances, respectively. Results show that there are at least 86.6% customer satisfaction by the proposed method, whereas customer satisfaction in the classical model is at most 33.3%. Numerical examples results show that the proposed two phase algorithm could achieve optimal solutions in small-size instances. Also in large-size instances, the proposed two phase algorithm could achieve better solutions with less gap from the lower bound in less computational time in comparison with the classic GA.
An Optimization Model for Scheduling Problems with Two-Dimensional Spatial Resource Constraint
NASA Technical Reports Server (NTRS)
Garcia, Christopher; Rabadi, Ghaith
2010-01-01
Traditional scheduling problems involve determining temporal assignments for a set of jobs in order to optimize some objective. Some scheduling problems also require the use of limited resources, which adds another dimension of complexity. In this paper we introduce a spatial resource-constrained scheduling problem that can arise in assembly, warehousing, cross-docking, inventory management, and other areas of logistics and supply chain management. This scheduling problem involves a twodimensional rectangular area as a limited resource. Each job, in addition to having temporal requirements, has a width and a height and utilizes a certain amount of space inside the area. We propose an optimization model for scheduling the jobs while respecting all temporal and spatial constraints.
46 CFR 174.335 - Watertight doors.
Code of Federal Regulations, 2010 CFR
2010-10-01
... SPECIFIC VESSEL TYPES Hopper Dredges With Working Freeboard Assignments Design § 174.335 Watertight doors. (a) Each hopper dredge must have sliding watertight doors (Class 3) approved under § 170.270 of this... to and including the maximum amount of assumed damage. (b) Each hopper dredge must have sliding...
46 CFR 174.335 - Watertight doors.
Code of Federal Regulations, 2011 CFR
2011-10-01
... SPECIFIC VESSEL TYPES Hopper Dredges With Working Freeboard Assignments Design § 174.335 Watertight doors. (a) Each hopper dredge must have sliding watertight doors (Class 3) approved under § 170.270 of this... to and including the maximum amount of assumed damage. (b) Each hopper dredge must have sliding...
ERIC Educational Resources Information Center
Vick, John W.; Houden, Dorothy
This report contains recommendations of a Wisconsin Task Assignment Steering Committee created to explore solutions to some significant problems facing adult chronic "revolving-detox-door" alcohol abusers (CRA's), persons with repeated admissions for detoxification services; and to examine the system that serves and funds them. This…
Developing a cross-docking network design model under uncertain environment
NASA Astrophysics Data System (ADS)
Seyedhoseini, S. M.; Rashid, Reza; Teimoury, E.
2015-06-01
Cross-docking is a logistic concept, which plays an important role in supply chain management by decreasing inventory holding, order packing, transportation costs and delivery time. Paying attention to these concerns, and importance of the congestion in cross docks, we present a mixed-integer model to optimize the location and design of cross docks at the same time to minimize the total transportation and operating costs. The model combines queuing theory for design aspects, for that matter, we consider a network of cross docks and customers where two M/M/c queues have been represented to describe operations of indoor trucks and outdoor trucks in each cross dock. To prepare a perfect illustration for performance of the model, a real case also has been examined that indicated effectiveness of the proposed model.
AutoDockFR: Advances in Protein-Ligand Docking with Explicitly Specified Binding Site Flexibility
Ravindranath, Pradeep Anand; Forli, Stefano; Goodsell, David S.; Olson, Arthur J.; Sanner, Michel F.
2015-01-01
Automated docking of drug-like molecules into receptors is an essential tool in structure-based drug design. While modeling receptor flexibility is important for correctly predicting ligand binding, it still remains challenging. This work focuses on an approach in which receptor flexibility is modeled by explicitly specifying a set of receptor side-chains a-priori. The challenges of this approach include the: 1) exponential growth of the search space, demanding more efficient search methods; and 2) increased number of false positives, calling for scoring functions tailored for flexible receptor docking. We present AutoDockFR–AutoDock for Flexible Receptors (ADFR), a new docking engine based on the AutoDock4 scoring function, which addresses the aforementioned challenges with a new Genetic Algorithm (GA) and customized scoring function. We validate ADFR using the Astex Diverse Set, demonstrating an increase in efficiency and reliability of its GA over the one implemented in AutoDock4. We demonstrate greatly increased success rates when cross-docking ligands into apo receptors that require side-chain conformational changes for ligand binding. These cross-docking experiments are based on two datasets: 1) SEQ17 –a receptor diversity set containing 17 pairs of apo-holo structures; and 2) CDK2 –a ligand diversity set composed of one CDK2 apo structure and 52 known bound inhibitors. We show that, when cross-docking ligands into the apo conformation of the receptors with up to 14 flexible side-chains, ADFR reports more correctly cross-docked ligands than AutoDock Vina on both datasets with solutions found for 70.6% vs. 35.3% systems on SEQ17, and 76.9% vs. 61.5% on CDK2. ADFR also outperforms AutoDock Vina in number of top ranking solutions on both datasets. Furthermore, we show that correctly docked CDK2 complexes re-create on average 79.8% of all pairwise atomic interactions between the ligand and moving receptor atoms in the holo complexes. Finally, we show that down-weighting the receptor internal energy improves the ranking of correctly docked poses and that runtime for AutoDockFR scales linearly when side-chain flexibility is added. PMID:26629955
Evans, Scott R; Rubin, Daniel; Follmann, Dean; Pennello, Gene; Huskins, W Charles; Powers, John H; Schoenfeld, David; Chuang-Stein, Christy; Cosgrove, Sara E; Fowler, Vance G; Lautenbach, Ebbing; Chambers, Henry F
2015-09-01
Clinical trials that compare strategies to optimize antibiotic use are of critical importance but are limited by competing risks that distort outcome interpretation, complexities of noninferiority trials, large sample sizes, and inadequate evaluation of benefits and harms at the patient level. The Antibacterial Resistance Leadership Group strives to overcome these challenges through innovative trial design. Response adjusted for duration of antibiotic risk (RADAR) is a novel methodology utilizing a superiority design and a 2-step process: (1) categorizing patients into an overall clinical outcome (based on benefits and harms), and (2) ranking patients with respect to a desirability of outcome ranking (DOOR). DOORs are constructed by assigning higher ranks to patients with (1) better overall clinical outcomes and (2) shorter durations of antibiotic use for similar overall clinical outcomes. DOOR distributions are compared between antibiotic use strategies. The probability that a randomly selected patient will have a better DOOR if assigned to the new strategy is estimated. DOOR/RADAR represents a new paradigm in assessing the risks and benefits of new strategies to optimize antibiotic use. © The Author 2015. Published by Oxford University Press on behalf of the Infectious Diseases Society of America. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.
DOT National Transportation Integrated Search
2010-11-01
The University of Denvers Intermodal Transportation Institute and System Planning : Corporations GlobalTrak system have successfully demonstrated the integration of GPS : tracking and active RFID monitoring of simulated cargo of pallet and cart...
Vamparys, Lydie; Laurent, Benoist; Carbone, Alessandra; Sacquin-Mora, Sophie
2016-10-01
Protein-protein interactions play a key part in most biological processes and understanding their mechanism is a fundamental problem leading to numerous practical applications. The prediction of protein binding sites in particular is of paramount importance since proteins now represent a major class of therapeutic targets. Amongst others methods, docking simulations between two proteins known to interact can be a useful tool for the prediction of likely binding patches on a protein surface. From the analysis of the protein interfaces generated by a massive cross-docking experiment using the 168 proteins of the Docking Benchmark 2.0, where all possible protein pairs, and not only experimental ones, have been docked together, we show that it is also possible to predict a protein's binding residues without having any prior knowledge regarding its potential interaction partners. Evaluating the performance of cross-docking predictions using the area under the specificity-sensitivity ROC curve (AUC) leads to an AUC value of 0.77 for the complete benchmark (compared to the 0.5 AUC value obtained for random predictions). Furthermore, a new clustering analysis performed on the binding patches that are scattered on the protein surface show that their distribution and growth will depend on the protein's functional group. Finally, in several cases, the binding-site predictions resulting from the cross-docking simulations will lead to the identification of an alternate interface, which corresponds to the interaction with a biomolecular partner that is not included in the original benchmark. Proteins 2016; 84:1408-1421. © 2016 The Authors Proteins: Structure, Function, and Bioinformatics Published by Wiley Periodicals, Inc. © 2016 The Authors Proteins: Structure, Function, and Bioinformatics Published by Wiley Periodicals, Inc.
A cross docking pipeline for improving pose prediction and virtual screening performance
NASA Astrophysics Data System (ADS)
Kumar, Ashutosh; Zhang, Kam Y. J.
2018-01-01
Pose prediction and virtual screening performance of a molecular docking method depend on the choice of protein structures used for docking. Multiple structures for a target protein are often used to take into account the receptor flexibility and problems associated with a single receptor structure. However, the use of multiple receptor structures is computationally expensive when docking a large library of small molecules. Here, we propose a new cross-docking pipeline suitable to dock a large library of molecules while taking advantage of multiple target protein structures. Our method involves the selection of a suitable receptor for each ligand in a screening library utilizing ligand 3D shape similarity with crystallographic ligands. We have prospectively evaluated our method in D3R Grand Challenge 2 and demonstrated that our cross-docking pipeline can achieve similar or better performance than using either single or multiple-receptor structures. Moreover, our method displayed not only decent pose prediction performance but also better virtual screening performance over several other methods.
ERIC Educational Resources Information Center
Scrivener, Susan; Coghlan, Erin
2011-01-01
Only one-third of all students who enter community colleges with the intent to earn a degree or certificate actually meet this goal within six years. MDRC launched the Opening Doors Demonstration in 2003--the first large-scale random assignment study in a community college setting--to tackle this problem. Partnering with six community colleges,…
ERIC Educational Resources Information Center
Moore, Kristin A.; Caal, Selma; Lawner, Elizabeth K.; Rojas, Angela; Walker, Karen
2014-01-01
Child Trends conducted a random assignment evaluation of the Abriendo Puertas/Opening Doors program, one of the largest programs in the United States working with low-income Latino parents of children ages zero to five. Since it began in 2007, the program has served over 30,000 parents/families in 34 states. The evaluation study examined the…
NASA Astrophysics Data System (ADS)
Salmaso, Veronica; Sturlese, Mattia; Cuzzolin, Alberto; Moro, Stefano
2018-01-01
Molecular docking is a powerful tool in the field of computer-aided molecular design. In particular, it is the technique of choice for the prediction of a ligand pose within its target binding site. A multitude of docking methods is available nowadays, whose performance may vary depending on the data set. Therefore, some non-trivial choices should be made before starting a docking simulation. In the same framework, the selection of the target structure to use could be challenging, since the number of available experimental structures is increasing. Both issues have been explored within this work. The pose prediction of a pool of 36 compounds provided by D3R Grand Challenge 2 organizers was preceded by a pipeline to choose the best protein/docking-method couple for each blind ligand. An integrated benchmark approach including ligand shape comparison and cross-docking evaluations was implemented inside our DockBench software. The results are encouraging and show that bringing attention to the choice of the docking simulation fundamental components improves the results of the binding mode predictions.
Ramírez, David; Caballero, Julio
2018-04-28
Molecular docking is the most frequently used computational method for studying the interactions between organic molecules and biological macromolecules. In this context, docking allows predicting the preferred pose of a ligand inside a receptor binding site. However, the selection of the “best” solution is not a trivial task, despite the widely accepted selection criterion that the best pose corresponds to the best energy score. Here, several rigid-target docking methods were evaluated on the same dataset with respect to their ability to reproduce crystallographic binding orientations, to test if the best energy score is a reliable criterion for selecting the best solution. For this, two experiments were performed: (A) to reconstruct the ligand-receptor complex by performing docking of the ligand in its own crystal structure receptor (defined as self-docking), and (B) to reconstruct the ligand-receptor complex by performing docking of the ligand in a crystal structure receptor that contains other ligand (defined as cross-docking). Root-mean square deviation (RMSD) was used to evaluate how different the obtained docking orientation is from the corresponding co-crystallized pose of the same ligand molecule. We found that docking score function is capable of predicting crystallographic binding orientations, but the best ranked solution according to the docking energy is not always the pose that reproduces the experimental binding orientation. This happened when self-docking was achieved, but it was critical in cross-docking. Taking into account that docking is typically used with predictive purposes, during cross-docking experiments, our results indicate that the best energy score is not a reliable criterion to select the best solution in common docking applications. It is strongly recommended to choose the best docking solution according to the scoring function along with additional structural criteria described for analogue ligands to assure the selection of a correct docking solution.
ERIC Educational Resources Information Center
Krieg, John M.; Theobald, Roddy; Goldhaber, Dan
2016-01-01
We use data from Washington State to examine two stages of the teacher pipeline: the placement of prospective teachers into student teaching assignments and the hiring of prospective teachers into their first teaching positions. We find that prospective teachers are likely to complete their student teaching near their college and hometowns but…
Ramezani, Mohammad; Shamsara, Jamal
2017-01-01
MMP-13 belongs to a large family of proteases called matrix metalloproteinases (MMPs) that degrades type II collagen, the main structural protein of articular cartilage. The main pathologic role of MMP-13 over expression is to contribute to the development of osteoarthritis. To find new inhibitors with possible selectivity for MMP-13 a structure based virtual screening was employed. The inhibitory activities of 11 inhibitors among 19 purchased compounds were approved by enzyme inhibition assay. Our results demonstrated that the CADD (computer aided drug design) could be successfully applied to find new MMP-13 inhibitors using a receptor structure (PDB code: 3O2X) which had been demonstrated a good performance in a cross-docking study. We discovered inhibitors with new scaffolds for inhibition of MMP-13 and some selectivity features such as proper S1' occupancy and interactions with S1' pocket that could be subjected to a future lead optimization study. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.
ERIC Educational Resources Information Center
Krieg, John; Theobald, Roddy; Goldhaber, Dan
2015-01-01
We use data from Washington State to examine two distinct stages of the teacher pipeline: the placement of prospective teachers in student teaching assignments; and the hiring of prospective teachers into their first teaching positions. We find that prospective teachers are likely to complete their student teaching near their college and…
A Genetic Algorithm Approach to Door Assignment in Breakbulk Terminals
DOT National Transportation Integrated Search
2001-08-23
Commercial vehicle regulation and enforcement is a necessary and important function of state governments. Through regulation, states promote highway safety, ensure that motor carriers have the proper licenses and operating permits, and collect taxes ...
Pharmacophore-Based Similarity Scoring for DOCK
2015-01-01
Pharmacophore modeling incorporates geometric and chemical features of known inhibitors and/or targeted binding sites to rationally identify and design new drug leads. In this study, we have encoded a three-dimensional pharmacophore matching similarity (FMS) scoring function into the structure-based design program DOCK. Validation and characterization of the method are presented through pose reproduction, crossdocking, and enrichment studies. When used alone, FMS scoring dramatically improves pose reproduction success to 93.5% (∼20% increase) and reduces sampling failures to 3.7% (∼6% drop) compared to the standard energy score (SGE) across 1043 protein–ligand complexes. The combined FMS+SGE function further improves success to 98.3%. Crossdocking experiments using FMS and FMS+SGE scoring, for six diverse protein families, similarly showed improvements in success, provided proper pharmacophore references are employed. For enrichment, incorporating pharmacophores during sampling and scoring, in most cases, also yield improved outcomes when docking and rank-ordering libraries of known actives and decoys to 15 systems. Retrospective analyses of virtual screenings to three clinical drug targets (EGFR, IGF-1R, and HIVgp41) using X-ray structures of known inhibitors as pharmacophore references are also reported, including a customized FMS scoring protocol to bias on selected regions in the reference. Overall, the results and fundamental insights gained from this study should benefit the docking community in general, particularly researchers using the new FMS method to guide computational drug discovery with DOCK. PMID:25229837
Independent Orbiter Assessment (IOA): Analysis of the mechanical actuation subsystem
NASA Technical Reports Server (NTRS)
Bacher, J. L.; Montgomery, A. D.; Bradway, M. W.; Slaughter, W. T.
1987-01-01
The results of the Independent Orbiter Assessment (IOA) of the Failure Modes and Effects Analysis (FMEA) and Critical Items List (CIL) are presented. The IOA approach features a top-down analysis of the hardware to determine failure modes, criticality, and potential critical items. To preserve independence, this analysis was accomplished without reliance upon the results contained within the NASA FMEA/CIL documentation. This report documents the independent analysis results corresponding to the Orbiter Mechanical Actuation System (MAS) hardware. Specifically, the MAS hardware consists of the following components: Air Data Probe (ADP); Elevon Seal Panel (ESP); External Tank Umbilical (ETU); Ku-Band Deploy (KBD); Payload Bay Doors (PBD); Payload Bay Radiators (PBR); Personnel Hatches (PH); Vent Door Mechanism (VDM); and Startracker Door Mechanism (SDM). The IOA analysis process utilized available MAS hardware drawings and schematics for defining hardware assemblies, components, and hardware items. Each level of hardware was evaluated and analyzed for possible failure modes and effects. Criticality was assigned based upon the severity of the effect for each failure mode.
NASA Astrophysics Data System (ADS)
Dhode, Trushant; Patil, Girish; Rajkumar, E.
2017-11-01
The components which are bound to impact are subjected to deformation even though it may be for a small scale. The efforts are always on for finding the best material to take impact that has no failure or moreover, less plastic deformation. A newly found material which is glass matrix steel named as ‘SAM2X5-630’ has astounding high elastic limit of 12.5GPa. Thus it can take powerful impact & regain its original shape avoiding the deformation of component under impact. The paper is focused on performing the Finite element analysis to assess the behaviour of ‘SAM2X5-630’ steel under impact loading of side door of car as well as impact of bullet on bulletproof jacket on which the material is assigned. The displacement or deformation occurred during impact is found to be lesser than known materials like Kevlar in bulletproof vest and Aluminium alloy in car door.
Can the Faculty Development Door Swing Both Ways? Science and Clinical Teaching in the 1990s.
ERIC Educational Resources Information Center
Tedesco, Lisa A.
1988-01-01
The relationship between clinical teaching and research in the basic sciences is discussed. The same energy expended to enhance clinical research will also efficiently build new curricula; ease the strains associated with assigning a priority to teaching or research; and serve to further science, teaching, and technology transfer. (MLW)
Independent Orbiter Assessment (IOA): Assessment of the mechanical actuation subsystem, volume 1
NASA Technical Reports Server (NTRS)
Bradway, M. W.; Slaughter, W. T.
1988-01-01
The results of the Independent Orbiter Assessment (IOA) of the Failure Modes and Effects Analysis (FMEA) and Critical Items List (CIL) are presented. The IOA approach features a top-down analysis of the hardware to determine draft failure modes, criticality, and potential critical items. To preserve independence, this analysis was accomplished without reliance upon the results contained within the NASA FMEA/CIL documentation. The IOA results were then compared to the proposed Post 51-L NASA FMEA/CIL baseline that was available. A resolution of each discrepancy from the comparison was provided through additional analysis as required. These discrepancies were flagged as issues, and recommendations were made based on the FMEA data available at the time. This report documents the results of that comparison for the Orbiter Mechanical Actuation System (MAS) hardware. Specifically, the MAS hardware consists of the following components: Air Data Probe (ADP); Elevon Seal Panel (ESP); External Tank Umbilical (ETU); Ku-Band Deploy (KBD); Payload Bay Doors (PBD); Payload Bay Radiators (PBR); Personnel Hatches (PH); Vent Door Mechanism (VDM); and Startracker Door Mechanism (SDM). Criticality was assigned based upon the severity of the effect for each failure mode.
Is particulate air pollution at the front door a good proxy of residential exposure?
Zauli Sajani, Stefano; Trentini, Arianna; Rovelli, Sabrina; Ricciardelli, Isabella; Marchesi, Stefano; Maccone, Claudio; Bacco, Dimitri; Ferrari, Silvia; Scotto, Fabiana; Zigola, Claudia; Cattaneo, Andrea; Cavallo, Domenico Maria; Lauriola, Paolo; Poluzzi, Vanes; Harrison, Roy M
2016-06-01
The most advanced epidemiological studies on health effects of air pollution assign exposure to individuals based on residential outdoor concentrations of air pollutants measured or estimated at the front-door. In order to assess to what extent this approach could cause misclassification, indoor measurements were carried out in unoccupied rooms at the front and back of a building which fronted onto a major urban road. Simultaneous measurements were also carried out at adjacent outdoor locations to the front and rear of the building. Two 15-day monitoring campaigns were conducted in the period June-December 2013 in a building located in the urban area of Bologna, Italy. Particulate matter metrics including PM2.5 mass and chemical composition, particle number concentration and size distribution were measured. Both outdoor and indoor concentrations at the front of the building substantially exceeded those at the rear. The highest front/back ratio was found for ultrafine particles with outdoor concentration at the front door 3.4 times higher than at the rear. A weak influence on front/back ratios was found for wind direction. Particle size distribution showed a substantial loss of particles within the sub-50 nm size range between the front and rear of the building and a further loss of this size range in the indoor data. The chemical speciation data showed relevant reductions for most constituents between the front and the rear, especially for traffic related elements such as Elemental Carbon, Iron, Manganese and Tin. The main conclusion of the study is that gradients in concentrations between the front and rear, both outside and inside the building, are relevant and comparable to those measured between buildings located in high and low traffic areas. These findings show high potential for misclassification in the epidemiological studies that assign exposure based on particle concentrations estimated or measured at subjects' home addresses. Copyright © 2016 Elsevier Ltd. All rights reserved.
Bajda, Marek; Jończyk, Jakub; Malawska, Barbara; Filipek, Sławomir
2014-03-24
β-Secretase (BACE-1) constitutes an important target for search of anti-Alzheimer's drugs. The first inhibitors of this enzyme were peptidic compounds with high molecular weight and low bioavailability. Therefore, the search for new efficient non-peptidic inhibitors has been undertaken by many scientific groups. We started our work from the development of in silico methodology for the design of novel BACE-1 ligands. It was validated on the basis of crystal structures of complexes with inhibitors, redocking, cross-docking and training/test sets of reference ligands. The presented procedure of assessment of the novel compounds as β-secretase inhibitors could be widely used in the design process.
Liu, Kai; Kokubo, Hironori
2017-10-23
Docking has become an indispensable approach in drug discovery research to predict the binding mode of a ligand. One great challenge in docking is to efficiently refine the correct pose from various putative docking poses through scoring functions. We recently examined the stability of self-docking poses under molecular dynamics (MD) simulations and showed that equilibrium MD simulations have some capability to discriminate between correct and decoy poses. Here, we have extended our previous work to cross-docking studies for practical applications. Three target proteins (thrombin, heat shock protein 90-alpha, and cyclin-dependent kinase 2) of pharmaceutical interest were selected. Three comparable poses (one correct pose and two decoys) for each ligand were then selected from the docking poses. To obtain the docking poses for the three target proteins, we used three different protocols, namely: normal docking, induced fit docking (IFD), and IFD against the homology model. Finally, five parallel MD equilibrium runs were performed on each pose for the statistical analysis. The results showed that the correct poses were generally more stable than the decoy poses under MD. The discrimination capability of MD depends on the strategy. The safest way was to judge a pose as being stable if any one run among five parallel runs was stable under MD. In this case, 95% of the correct poses were retained under MD, and about 25-44% of the decoys could be excluded by the simulations for all cases. On the other hand, if we judge a pose as being stable when any two or three runs were stable, with the risk of incorrectly excluding some correct poses, approximately 31-53% or 39-56% of the two decoys could be excluded by MD, respectively. Our results suggest that simple equilibrium simulations can serve as an effective filter to exclude decoy poses that cannot be distinguished by docking scores from the computationally expensive free-energy calculations.
A point-of-care chemistry test for reduction of turnaround and clinical decision time.
Lee, Eui Jung; Shin, Sang Do; Song, Kyoung Jun; Kim, Seong Chun; Cho, Jin Seong; Lee, Seung Chul; Park, Ju Ok; Cha, Won Chul
2011-06-01
Our study compared clinical decision time between patients managed with a point-of-care chemistry test (POCT) and patients managed with the traditional central laboratory test (CLT). This was a randomized controlled multicenter trial in the emergency departments (EDs) of 5 academic teaching hospitals. We randomly assigned patients to POCT or CLT stratified by the Emergency Severity Index. A POCT chemistry analyzer (Piccolo; Abaxis, Inc, Union City, Calif), which is able to test liver panel, renal panel, pancreas enzymes, lipid panel, electrolytes, and blood gases, was set up in each ED. Primary and secondary end point was turnaround time and door-to-clinical-decision time. The total 2323 patients were randomly assigned to the POCT group (n = 1167) or to the CLT group (n = 1156). All of the basic characteristics were similar in the 2 groups. The turnaround time (median, interquartile range [IQR]) of the POCT group was shorter than that of the CLT group (14, 12-19 versus 55, 45-69 minutes; P < .0001). The median (IQR) door-to-clinical-decision time was also shorter in the POCT compared with the CLT group (46, 33-61 versus 86, 68-107 minutes; P < .0001). The proportion of patients who had new decisions within 60 minutes was 72.8% for the POCT group and 12.5% for the CLT group (P < .0001). A POCT chemistry analyzer in the ED shortens the test turnaround and ED clinical decision times compared with CLT. Copyright © 2011 Elsevier Inc. All rights reserved.
Independent Orbiter Assessment (IOA): Assessment of the mechanical actuation subsystem, volume 2
NASA Technical Reports Server (NTRS)
Bradway, M. W.; Slaughter, W. T.
1988-01-01
The results of the Independent Orbiter Assessment (IOA) of the Failure Modes and Effects Analysis (FMEA) and Critical Items List (CIL) are presented. The IOA approach features a top-down analysis of the hardware to determine draft failure modes, criticality, and potential critical items. To preserve independence, this analysis was accomplished without reliance upon the results contained within the NASA FMEA/CIL documentation. The IOA results were then compared to the proposed Post 51-L NASA FMEA/CIL baseline that was available. A resolution of each discrepancy from the comparison was provided through additional analysis as required. These discrepancies were flagged as issues, and recommendations were made based on the FMEA data available at the time. This report documents the results of that comparison for the Orbiter Mechanical Actuation System (MAS) hardware. Specifically, the MAS hardware consists of the following components: Air Data Probe (ADP); Elevon Seal Panel (ESP); External Tank Umbilical (ETU); Ku-Band Deploy (KBD); Payload Bay Doors (PBD); Payload Bay Radiators (PBR); Personnel Hatches (PH); Vent Door Mechanism (VDM); and Startracker Door Mechanism (SDM). Criticality was assigned based upon the severity of the effect for each failure mode. Volume 2 continues the presentation of IOA analysis worksheets and contains the potential critical items list, detailed analysis, and NASA FMEA/CIL to IOA worksheet cross reference and recommendations.
Improving the accuracy of the diagnosis of schizophrenia by means of virtual reality.
Sorkin, Anna; Weinshall, Daphna; Modai, Ilan; Peled, Avi
2006-03-01
The authors' goal was to improve the diagnosis of schizophrenia by using virtual reality technology to build a complex, multimodal environment in which cognitive functions can be studied (and measured) in parallel. The authors studied sensory integration within working memory by means of computer navigation through a virtual maze. The simulated journey consisted of a series of rooms, each of which included three doors. Each door was characterized by three features (color, shape, and sound), and a single combination of features--the door-opening rule--was correct. Subjects had to learn the rule and use it. The participants were 39 schizophrenic patients and 21 healthy comparison subjects. Upon completion, each subject was assigned a performance profile, including various error scores, response time, navigation ability, and strategy. A classification procedure based on the subjects' performance profile correctly predicted 85% of the schizophrenic patients (and all of the comparison subjects). Several performance variables showed significant correlations with scores on a standard diagnostic measure (Positive and Negative Syndrome Scale), suggesting potential use of these measurements for the diagnosis of schizophrenia. On the other hand, the patients did not show unusual repetition of response despite stimulus cessation (called "perseveration" in classical studies of schizophrenia), which is a common symptom of the disease. This deficit appeared only when the subjects did not receive proper explanation of the task. The ability to study multimodal performance simultaneously by using virtual reality technology opens new possibilities for the diagnosis of schizophrenia with objective procedures.
Four Ways to Avoid a Credentialing Cash Flow Crisis.
Toth, Cheryl
2015-01-01
Credentialing a physician for Medicare and private plans is a detailed and time-consuming process, but it must be completed before a plan will reimburse a practice's billed services. Assign a person with the right skills for this project, and insist on regular progress reports to be certain credentialing has been successfully completed. Submit credentialing applications three to six months ahead of opening your practice doors, moving to a new location, or merging with another organization. If you're considering outsourcing the credentialing process to a service, verify its reputation and work products with its customers.
DOORS AT REAR KITCHEN WALL, LOOKING SOUTH; LEFT DOOR LEADS ...
DOORS AT REAR KITCHEN WALL, LOOKING SOUTH; LEFT DOOR LEADS TO SMALL PANTRY, EAST DOOR AND DINING ROOM; 2ND LEFT DOOR LEADS TO BASEMENT; 3RD LEFT DOOR LEADS TO 2ND FLOOR VIA REAR STAIRS; RIGHT DOOR LEADS TO PANTRY, DINING ROOM - Fort Leavenworth, Building No. 18, 16-18 Sumner Place, Leavenworth, Leavenworth County, KS
Positional accuracy and geographic bias of four methods of geocoding in epidemiologic research.
Schootman, Mario; Sterling, David A; Struthers, James; Yan, Yan; Laboube, Ted; Emo, Brett; Higgs, Gary
2007-06-01
We examined the geographic bias of four methods of geocoding addresses using ArcGIS, commercial firm, SAS/GIS, and aerial photography. We compared "point-in-polygon" (ArcGIS, commercial firm, and aerial photography) and the "look-up table" method (SAS/GIS) to allocate addresses to census geography, particularly as it relates to census-based poverty rates. We randomly selected 299 addresses of children treated for asthma at an urban emergency department (1999-2001). The coordinates of the building address side door were obtained by constant offset based on ArcGIS and a commercial firm and true ground location based on aerial photography. Coordinates were available for 261 addresses across all methods. For 24% to 30% of geocoded road/door coordinates the positional error was 51 meters or greater, which was similar across geocoding methods. The mean bearing was -26.8 degrees for the vector of coordinates based on aerial photography and ArcGIS and 8.5 degrees for the vector based on aerial photography and the commercial firm (p < 0.0001). ArcGIS and the commercial firm performed very well relative to SAS/GIS in terms of allocation to census geography. For 20%, the door location based on aerial photography was assigned to a different block group compared to SAS/GIS. The block group poverty rate varied at least two standard deviations for 6% to 7% of addresses. We found important differences in distance and bearing between geocoding relative to aerial photography. Allocation of locations based on aerial photography to census-based geographic areas could lead to substantial errors.
Task demands and human capabilities in door use.
Chang, Shih-Kai; Drury, Colin G
2007-05-01
Doors are ubiquitous in the built environment, bur despite their frequent use by people and their involvement in over 300,000 injuries per year (USA), they are little studied from a human factors perspective. This paper provides a classification scheme for doors based on human/door interaction and a prototypical task analysis of door use. Two observational studies were performed on a particular type of door. The first observed 1600 human/door interactions and found that people's use of force-enhancing strategies increased for larger doors, particularly for people of smaller stature. The second observed 800 interactions with push doors and found that the pont where force is exerted is higher for taller individuals and closer to the center of the door than is typically assumed for placing handles. Th second study was partly corroborated by measuring the position of wear patterns on doors. As is expected in human factors, the was people used doors was a function of both task demands and human capabilities. These results suggests that those specifying doors for building s use a restoring torque below 30 Nm and site the handle or push plate 250-350 mm from the door edge and 1000-1500 mm above the floor.
Pulling a Door Open by Pushing on It
ERIC Educational Resources Information Center
van den Berg, Willem H.
2007-01-01
Ordinarily, opening a door by pulling on the knob or handle causes a net torque on the door, and hence an angular acceleration, about a "vertical" axis. However, it may be that the top or bottom of the door sticks to the door frame; this horizontal force perpendicular to the plane of the door causes a torque on the door about a "horizontal" axis.…
Door Hardware and Installations; Carpentry: 901894.
ERIC Educational Resources Information Center
Dade County Public Schools, Miami, FL.
The curriculum guide outlines a course designed to provide instruction in the selection, preparation, and installation of hardware for door assemblies. The course is divided into five blocks of instruction (introduction to doors and hardware, door hardware, exterior doors and jambs, interior doors and jambs, and a quinmester post-test) totaling…
49 CFR 541.5 - Requirements for passenger motor vehicles.
Code of Federal Regulations, 2011 CFR
2011-10-01
...) Engine. (2) Transmission. (3) Right front fender. (4) Left front fender. (5) Hood. (6) Right front door. (7) Left front door. (8) Right rear door. (9) Left rear door. (10) Sliding or cargo door(s). (11) Front bumper. (12) Rear bumper. (13) Right rear quarter panel (passenger cars). (14) Left rear quarter...
49 CFR 541.5 - Requirements for passenger motor vehicles.
Code of Federal Regulations, 2010 CFR
2010-10-01
...) Engine. (2) Transmission. (3) Right front fender. (4) Left front fender. (5) Hood. (6) Right front door. (7) Left front door. (8) Right rear door. (9) Left rear door. (10) Sliding or cargo door(s). (11) Front bumper. (12) Rear bumper. (13) Right rear quarter panel (passenger cars). (14) Left rear quarter...
AT LEFT IS WEST DOOR; AT CENTER IS CELLAR DOOR ...
AT LEFT IS WEST DOOR; AT CENTER IS CELLAR DOOR CHEEK TRACE. AT RIGHT IS STONE BASE COURSE AND LOCATION OF ORIGINAL EAST DOOR OPENING - Kid-Chandler House, 323 Walnut Street, Philadelphia, Philadelphia County, PA
The sound insulations of studio doors. Part 1: Door blanks
NASA Astrophysics Data System (ADS)
Plumb, G. D.; Clark, R.
The sound insulations of a range of different door blanks were measured. The results were compared with the sound insulations of existing BBC door blanks. The new doors were made from medium density fiberboard (MDF) which is more stable than the blockboard used in existing studio doors. Consequently, they should require less maintenance and adjustment and should have a longer lifespan. The doors had higher sound insulations for their weight than existing designs, which might permit savings in the costs of the surrounding building structures. Overall construction costs of the door blanks themselves are likely to be similar to those of existing designs. A companion Report (BBC RD 1994/15) describes sound insulation measurements made on plant-on door seals. The intention of this work was to simplify the construction of the door frame and the fitting of the seals to reduce costs.
49 CFR 571.206 - Standard No. 206; Door locks and door retention components.
Code of Federal Regulations, 2012 CFR
2012-10-01
... (GVWR) of 4,536 kg or less. S3. Definitions. Auxiliary Door Latch is a latch equipped with a fully... auxiliary door latch on each hinged door shall not disengage from the fully latched position when an inertia... hinged back door shall also not disengage from the fully latched position when an inertia load is applied...
49 CFR 571.206 - Standard No. 206; Door locks and door retention components.
Code of Federal Regulations, 2013 CFR
2013-10-01
... (GVWR) of 4,536 kg or less. S3. Definitions. Auxiliary Door Latch is a latch equipped with a fully... auxiliary door latch on each hinged door shall not disengage from the fully latched position when an inertia... hinged back door shall also not disengage from the fully latched position when an inertia load is applied...
49 CFR 571.206 - Standard No. 206; Door locks and door retention components.
Code of Federal Regulations, 2011 CFR
2011-10-01
... (GVWR) of 4,536 kg or less. S3. Definitions. Auxiliary Door Latch is a latch equipped with a fully... auxiliary door latch on each hinged door shall not disengage from the fully latched position when an inertia... hinged back door shall also not disengage from the fully latched position when an inertia load is applied...
49 CFR 571.206 - Standard No. 206; Door locks and door retention components.
Code of Federal Regulations, 2014 CFR
2014-10-01
... (GVWR) of 4,536 kg or less. S3. Definitions. Auxiliary Door Latch is a latch equipped with a fully... auxiliary door latch on each hinged door shall not disengage from the fully latched position when an inertia... hinged back door shall also not disengage from the fully latched position when an inertia load is applied...
Knaapen, Paul; de Mulder, Maarten; van der Zant, Friso M; Peels, Hans O; Twisk, Jos W R; van Rossum, Albert C; Cornel, Jan H; Umans, Victor A W M
2009-02-01
Primary percutaneous coronary intervention (PCI) performed in large community hospitals without cardiac surgery back-up facilities (off-site) reduces door-to-balloon time compared with emergency transferal to tertiary interventional centers (on-site). The present study was performed to explore whether off-site PCI for acute myocardial infarction results in reduced infarct size. One hundred twenty-eight patients with acute ST-segment elevation myocardial infarction were randomly assigned to undergo primary PCI at the off-site center (n = 68) or to transferal to an on-site center (n = 60). Three days after PCI, (99m)Tc-sestamibi SPECT was performed to estimate infarct size. Off-site PCI significantly reduced door-to-balloon time compared with on-site PCI (94 +/- 54 versus 125 +/- 59 min, respectively, p < 0.01), although symptoms-to-treatment time was only insignificantly reduced (257 +/- 211 versus 286 +/- 146 min, respectively, p = 0.39). Infarct size was comparable between treatment centers (16 +/- 15 versus 14 +/- 12%, respectively p = 0.35). Multivariate analysis revealed that TIMI 0/1 flow grade at initial coronary angiography (OR 3.125, 95% CI 1.17-8.33, p = 0.023), anterior wall localization of the myocardial infarction (OR 3.44, 95% CI 1.38-8.55, p < 0.01), and development of pathological Q-waves (OR 5.07, 95% CI 2.10-12.25, p < 0.01) were independent predictors of an infarct size > 12%. Off-site PCI reduces door-to-balloon time compared with transferal to a remote on-site interventional center but does not reduce infarct size. Instead, pre-PCI TIMI 0/1 flow, anterior wall infarct localization, and development of Q-waves are more important predictors of infarct size.
Azizian, Homa; Bagherzadeh, Kowsar; Shahbazi, Sophia; Sharifi, Niusha; Amanlou, Massoud
2017-09-18
Respiratory chain ubiquinol-cytochrome (cyt) c oxidoreductase (cyt bc 1 or complex III) has been demonstrated as a promising target for numerous antibiotics and fungicide applications. In this study, a virtual screening of NCI diversity database was carried out in order to find novel Qo/Qi cyt bc 1 complex inhibitors. Structure-based virtual screening and molecular docking methodology were employed to further screen compounds with inhibition activity against cyt bc 1 complex after extensive reliability validation protocol with cross-docking method and identification of the best score functions. Subsequently, the application of rational filtering procedure over the target database resulted in the elucidation of a novel class of cyt bc 1 complex potent inhibitors with comparable binding energies and biological activities to those of the standard inhibitor, antimycin.
Real-time door detection for indoor autonomous vehicle
NASA Astrophysics Data System (ADS)
He, Zhihao; Zhu, Ming
2017-07-01
Indoor Autonomous Vehicle(IAV) is used in many indoor scenes. Such as hotels and hospitals. Door detection is a key issue to guide the IAV into rooms. In this paper, we consider door detection in the use of indoor navigation of IAV. Since real-time properties are important for real-world IAV, the detection algorithm must be fast enough. Most monocular-camera based door detection model need a perfect detection of the four line segments of the door or the four corners. But in many situations, line segments could be extended or cut off. And there could be many false detected corners. And few of them can distinguish doors from door-like objects with door-like shape effectively. We proposed a 2-D vision model of the door that is made up of line segments. The number of parts detected is used to determine the possibility of a door. Our algorithm is tested on a database of doors.1 The robustness and real-time are verified. The precision is 89.4%. Average time consumed for processing a 640x320 figure is 44.73ms.
Glass/Epoxy Door Panel for Automobiles
NASA Technical Reports Server (NTRS)
Bauer, J. L. JR.
1985-01-01
Lightweight panel cost-effective. Integrally-molded intrusion strap key feature of composite outer door panel. Strap replaces bulky and heavy steel instrusion beam of conventional door. Standard steel inner panel used for demonstration purposes. Door redesigned to exploit advantages of composite outer panel thinner. Outer panel for automobilie door, made of glass/epoxy composite material, lighter than conventional steel door panel, meets same strength requirements, and less expensive.
Code of Federal Regulations, 2011 CFR
2011-01-01
... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Doors. 23.783 Section 23.783 Aeronautics... Cargo Accommodations § 23.783 Doors. (a) Each closed cabin with passenger accommodations must have at least one adequate and easily accessible external door. (b) Passenger doors must not be located with...
Door latching recognition apparatus and process
Eakle, Jr., Robert F.
2012-05-15
An acoustic door latch detector is provided in which a sound recognition sensor is integrated into a door or door lock mechanism. The programmable sound recognition sensor can be trained to recognize the acoustic signature of the door and door lock mechanism being properly engaged and secured. The acoustic sensor will signal a first indicator indicating that proper closure was detected or sound an alarm condition if the proper acoustic signature is not detected within a predetermined time interval.
46 CFR 170.270 - Door design, operation, installation, and testing.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 46 Shipping 7 2010-10-01 2010-10-01 false Door design, operation, installation, and testing. 170..., operation, installation, and testing. (a) Each Class 1 door must have a quick action closing device... the welding process so that the door frame is not distorted. (e) For each watertight door which is in...
15. INTERIOR OF BEDROOM NO. 2 SHOWING OPEN PANELED DOOR ...
15. INTERIOR OF BEDROOM NO. 2 SHOWING OPEN PANELED DOOR TO THE BATHROOM AT PHOTO CENTER, OPEN DOOR TO CLOSET AT RIGHT OF THE BATHROOM DOOR, AND OPEN DOOR TO LIVING ROOM AT EXTREME PHOTO RIGHT. VIEW TO NORTH. - Bishop Creek Hydroelectric System, Plant 4, Worker Cottage, Bishop Creek, Bishop, Inyo County, CA
Tools for Requirements Management: A Comparison of Telelogic DOORS and the HiVe
2006-07-01
types DOORS deals with are text files, spreadsheets, FrameMaker , rich text, Microsoft Word and Microsoft Project. 2.5.1 Predefined file formats DOORS...during the export. DOORS exports FrameMaker files in an incomplete format, meaning DOORS exported files will have to be opened in FrameMaker and saved
Code of Federal Regulations, 2011 CFR
2011-04-01
... Doors and Frames; (viii) ISDSI-107-80—Thermal Performance Standard for Insulated Steel Door Systems; (ix... certification program for exterior insulated steel door systems. 200.949 Section 200.949 Housing and Urban... program for exterior insulated steel door systems. (a) Applicable standards. (1) All Exterior Insulated...
14 CFR 25.772 - Pilot compartment doors.
Code of Federal Regulations, 2011 CFR
2011-01-01
... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Pilot compartment doors. 25.772 Section 25... § 25.772 Pilot compartment doors. For an airplane that has a lockable door installed between the pilot... pilot compartment if the cockpit door becomes jammed. (c) There must be an emergency means to enable a...
14 CFR 25.772 - Pilot compartment doors.
Code of Federal Regulations, 2010 CFR
2010-01-01
... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Pilot compartment doors. 25.772 Section 25... § 25.772 Pilot compartment doors. For an airplane that has a lockable door installed between the pilot... pilot compartment if the cockpit door becomes jammed. (c) There must be an emergency means to enable a...
ESKIMO II. Magazine Separation Test
1974-09-01
were supported against blast loading at the hinges and at the top and bottom. Further door support was provided by bearings on stops welded to the...head of the door and by a round steel rod projecting rnwad and bearing on the steel beam. During the test the doors were dislodged and thrown to the...cOAcnlt projection abova door opining to It if fan haaowali. C 133 3180 • 75 153 Stoaf dowat to nmtt door movmint at top; »aas affactwa than door
Velázquez-Brizuela, Irma E.; Ortiz, Genaro G.; Ventura-Castro, Lucia; Árias-Merino, Elva D.; Pacheco-Moisés, Fermín P.; Macías-Islas, Miguel A.
2014-01-01
Background. Dementia affects memory, thinking, language, judgment, and behavior. Depression, is common in older adults with dementia. The concomitance of dementia and depression increases disability with impaired activities of daily living (ADL), increasing the chances of institutionalization and mortality. Methods. Cross-sectional study of a population 60 years and older who live in the State of Jalisco, Mexico. A total of 1142 persons were assessed regarding their cognitive function, emotional state, and physical performance. Door-to-door interview technique was assigned in condition with multistage probability random sampling. Cognitive function, depression and functional disability were assessed by applying standardized Minimental State Examination (Folstein), Geriatric Depression Scale, and the Katz index, respectively. Diagnosis of dementia was performed according to the criteria of the Diagnostic and Statistical Manual of Mental Disorders, the Fourth Edition. Data were analyzed using SPSS software. Results. Prevalence of demency was 9.5% (63.35% women, and 36.7% men). Demency was associated with being woman, being older than 70 years, low level of education, not having the economic benefit of retirement, being single or living without a partner, low level of education, suffering from depression and have functional disability in ADL. Conclusion. Dementia is more common in women and is related to depression and disability. PMID:24795758
Velázquez-Brizuela, Irma E; Ortiz, Genaro G; Ventura-Castro, Lucia; Arias-Merino, Elva D; Pacheco-Moisés, Fermín P; Macías-Islas, Miguel A
2014-01-01
Background. Dementia affects memory, thinking, language, judgment, and behavior. Depression, is common in older adults with dementia. The concomitance of dementia and depression increases disability with impaired activities of daily living (ADL), increasing the chances of institutionalization and mortality. Methods. Cross-sectional study of a population 60 years and older who live in the State of Jalisco, Mexico. A total of 1142 persons were assessed regarding their cognitive function, emotional state, and physical performance. Door-to-door interview technique was assigned in condition with multistage probability random sampling. Cognitive function, depression and functional disability were assessed by applying standardized Minimental State Examination (Folstein), Geriatric Depression Scale, and the Katz index, respectively. Diagnosis of dementia was performed according to the criteria of the Diagnostic and Statistical Manual of Mental Disorders, the Fourth Edition. Data were analyzed using SPSS software. Results. Prevalence of demency was 9.5% (63.35% women, and 36.7% men). Demency was associated with being woman, being older than 70 years, low level of education, not having the economic benefit of retirement, being single or living without a partner, low level of education, suffering from depression and have functional disability in ADL. Conclusion. Dementia is more common in women and is related to depression and disability.
Prevalence of depression among a population aged over 45 years in Chiang Mai, Thailand.
Wangtongkum, Suparus; Sucharitakul, Phongsakorn; Wongjaroen, Sriwanna; Maneechompoo, Suthin
2008-12-01
To determine the prevalence of depression in Thai people of 45 years and over. The presented project was a cross sectional study on the prevalence of depression and cognitive impairment in Chiang Mai. Door-to-door interview technique was assigned in condition with multistage probability random sampling to obtain subjects that represent a population of Chiang Mai. The research was conducted between October 2004 and September 2005. Data were collected on subject that were 45 years old and over. All subjects were selected from all districts in Chiang Mai. Thai Mini Mental State Examination (TMSE) and Thai Beck Depression Inventory (BDI) were used as the assessment tool If the subjects had a TMSE score less than 24 points, it was assumed as a cognitive impairment. One thousand four hundred ninety two people, 610 males and 882 females, were enrolled in the present study. Their mean age was 59.7 +/- 10.4 years (45-88 year). The prevalence of depression only was 29.2%, the prevalence of cognitive impairment only was 5.63% and the prevalence of cognitive impairment with depression was 3.96%. The prevalence of depression increased with age. The prevalence of depression in Thai people of 45 years and over was 29.2% and increased with age.
2. CLOSEUP OF THE ORNAMENTAL LIGHTS, THE CENTRAL BIFOLD DOORS, ...
2. CLOSEUP OF THE ORNAMENTAL LIGHTS, THE CENTRAL BIFOLD DOORS, AND THE EXAGGERATED TRIGLYTHS ABOVE THE DOOR, LOOKING WEST. NOTE THE PERSONNEL DOOR COMPRISED OF THE BOTTOM THREE PANELS IN THE LEFT BIFOLD DOOR. - Wyoming Valley Flood Control System, Woodward Pumping Station, East of Toby Creek crossing by Erie-Lackawanna Railroad, Edwardsville, Luzerne County, PA
49 CFR 571.214 - Standard No. 214; Side impact protection.
Code of Federal Regulations, 2011 CFR
2011-10-01
... rearmost position. (4) Any side door that is designed to be easily attached to or removed (e.g., using... lifts, and vehicles which have no doors or exclusively have doors that are designed to be easily... have no doors, or exclusively have doors that are designed to be easily attached or removed so that the...
77 FR 19055 - Morgan Olson, LLC, Receipt of Petition for Decision of Inconsequential Noncompliance
Federal Register 2010, 2011, 2012, 2013, 2014
2012-03-29
... noncompliance is that the affected vehicles do not contain a primary door latch system or door closure warning... for either a primary door latch system or door closure warning system applied only to its vehicles... latched position. Nor are these vehicles equipped with a door closure warning system. Rule text: Paragraph...
75 FR 4485 - Airworthiness Directives; Fokker Services B.V. Model F.28 Mark 0070 and 0100 Airplanes
Federal Register 2010, 2011, 2012, 2013, 2014
2010-01-28
... have been reported where a passenger door actuator detached from the passenger door. This caused the... result in injury to persons on the ground and damage to the aircraft. * * * * * We are issuing this AD to... where a passenger door actuator detached from the passenger door. This caused the passenger door to drop...
11. INTERIOR OF BEDROOM NUMBER ONE SHOWING OPEN DOOR FROM ...
11. INTERIOR OF BEDROOM NUMBER ONE SHOWING OPEN DOOR FROM LIVING ROOM AT EXTREME PHOTO LEFT, OPEN DOOR TO WALK-IN CLOSET AT PHOTO LEFT CENTER, OPEN DOOR TO BATHROOM AT PHOTO CENTER, AND OPEN DOOR TO BEDROOM NUMBER TWO AT EXTREME PHOTO RIGHT. VIEW TO WEST. - Rush Creek Hydroelectric System, Worker Cottage, Rush Creek, June Lake, Mono County, CA
33. Detail, typical door hardware, door from front parlor to ...
33. Detail, typical door hardware, door from front parlor to entrance hall; view to south; 135mm lens with electronic flash illumination. - Warner Hutton House, 13495 Sousa Lane, Saratoga, Santa Clara County, CA
Nuclear Storage Overpack Door Actuator and Alignment Apparatus
Andreyko, Gregory M.
2005-05-11
The invention is a door actuator and alignment apparatus for opening and closing the 15,000-pound horizontally sliding door of a storage overpack. The door actuator includes a ball screw mounted horizontally on a rigid frame including a pair of door panel support rails. An electrically powered ball nut moves along the ball screw. The ball nut rotating device is attached to a carriage. The carriage attachment to the sliding door is horizontally pivoting. Additional alignment features include precision cam followers attached to the rails and rail guides attached to the carriage.
Nuclear storage overpack door actuator and alignment apparatus
Andreyko, Gregory M.
2005-05-10
The invention is a door actuator and alignment apparatus for opening and closing the 15,000-pound horizontally sliding door of a storage overpack. The door actuator includes a ball screw mounted horizontally on a rigid frame including a pair of door panel support rails. An electrically powered ball nut moves along the ball screw. The ball nut rotating device is attached to a carriage. The carriage attachment to the sliding door is horizontally pivoting. Additional alignment features include precision cam followers attached to the rails and rail guides attached to the carriage.
Marguerite Arnet Residence, interior walls and front door, and door ...
Marguerite Arnet Residence, interior walls and front door, and door leading to next room - Adam & Bessie Arnet Homestead, Marguerite Arnet Residence, 560 feet northeast of Adam & Bessie Arnet Residence, Model, Las Animas County, CO
24 CFR 3280.105 - Exit facilities; exterior doors.
Code of Federal Regulations, 2013 CFR
2013-04-01
... opening. (3) Each swinging exterior door other than screen or storm doors shall have a key-operated lock... the use of a key for operation from the inside. (4) All exterior doors, including storm and screen...
24 CFR 3280.105 - Exit facilities; exterior doors.
Code of Federal Regulations, 2012 CFR
2012-04-01
... opening. (3) Each swinging exterior door other than screen or storm doors shall have a key-operated lock... the use of a key for operation from the inside. (4) All exterior doors, including storm and screen...
24 CFR 3280.105 - Exit facilities; exterior doors.
Code of Federal Regulations, 2010 CFR
2010-04-01
... opening. (3) Each swinging exterior door other than screen or storm doors shall have a key-operated lock... the use of a key for operation from the inside. (4) All exterior doors, including storm and screen...
24 CFR 3280.105 - Exit facilities; exterior doors.
Code of Federal Regulations, 2011 CFR
2011-04-01
... opening. (3) Each swinging exterior door other than screen or storm doors shall have a key-operated lock... the use of a key for operation from the inside. (4) All exterior doors, including storm and screen...
Traffic in the operating room during joint replacement is a multidisciplinary problem
Bédard, Martin; Pelletier-Roy, Rémi; Angers-Goulet, Mathieu; Leblanc, Pierre-Alexandre; Pelet, Stéphane
2015-01-01
Background Door openings disrupt the laminar air flow and increase the bacterial count in the operating room (OR). We aimed to define the incidence of door openings in the OR during primary total joint arthroplasty (TJA) surgeries and determine whether measures were needed and/or possible to reduce OR staff traffic. Methods We recorded the number of door openings during 100 primary elective TJA surgeries; the OR personnel were unaware of the observer’s intention. Operating time was divided into the preincision period, defined as the time from the opening of surgical trays to skin incision, and the postincision period, defined as time from incision to dressing application. Results The mean number of door openings during primary TJA was 71.1 (range 35–176) with a mean operative time of 111.9 (range 53–220) minutes, for an average of 0.64 (range 0.36–1.05) door openings/min. Nursing staff were responsible for 52.2% of total door openings, followed by anesthesia staff at 23.9% and orthopedic staff at 12.7%. In the preincision period, we observed an average of 0.84 door openings/min, with nursing and orthopedic personnel responsible for most of the door openings. The postincision period yielded an average of 0.54 door openings/min, with nursing and anesthesia personnel being responsible for most of the door openings. Conclusion There is a high incidence of door openings during TJA. Because we observed a range in the number of door openings per surgery, we believe it is possible to reduce this number during TJA. PMID:26022153
49 CFR 571.206 - Standard No. 206; Door locks and door retention components.
Code of Federal Regulations, 2010 CFR
2010-10-01
... components. S1. Scope and Purpose. This standard specifies requirements for vehicle door locks and door... provides access from outside the vehicle to a space wholly partitioned from the occupant compartment by a...
5. View bay door and single man door on north ...
5. View bay door and single man door on north elevation of power plant, looking south - Naval Air Station Fallon, Power Plant, 800 Complex, off Carson Road near intersection of Pasture & Berney Roads, Fallon, Churchill County, NV
13. Detail of hangar door showing mount of sliding door ...
13. Detail of hangar door showing mount of sliding door leaves at overhead girder. Viedw to north-northeast. - Ellsworth Air Force Base, Readiness Hangar, Kenny Road, southeast corner of interstction with G Avenue, Blackhawk, Meade County, SD
Super Heavy-Duty Door Hardware.
ERIC Educational Resources Information Center
Fickes, Michael
2000-01-01
Discusses the new generation of durable school-door hardware and innovations that can resist everyday abuse. Concluding comments address cross-corridor door innovations that can help doorways more easily accommodate the passage of oversized items, and classroom door locking systems. (GR)
Experimental investigation of door dynamic opening caused by impinging shock wave
NASA Astrophysics Data System (ADS)
Biamino, L.; Jourdan, G.; Mariani, C.; Igra, O.; Massol, A.; Houas, L.
2011-02-01
To prevent damage caused by accidental overpressure inside a closed duct (e.g. jet engine) safety valves are introduced. The present study experimentally investigates the dynamic opening of such valves by employing a door at the end of a shock tube driven section. The door is hung on an axis and is free to rotate, thereby opening the tube. The evolved flow and wave pattern due to a collision of an incident shock wave with the door, causing the door opening, is studied by employing a high speed schlieren system and recording pressures at different places inside the tube as well as on the rotating door. Analyzing this data sheds light on the air flow evolution and the behavior of the opening door. In the present work, emphasis is given to understanding the complex, unsteady flow developed behind the transmitted shock wave as it diffracts over the opening door. It is shown that both the door inertia and the shock wave strength influence the opening dynamic evolution, but not in the proportions that might be expected.
Allison, Thomas L.
2015-10-06
A door opening spring assistance apparatus is set forth that will automatically apply a door opening assistance force using a combination of rods and coil springs. The release of the rods by the coil springs reduces the force required to set the door in motion.
20. INTERIOR OF BEDROOM NUMBER THREE SHOWING OPEN DOOR TO ...
20. INTERIOR OF BEDROOM NUMBER THREE SHOWING OPEN DOOR TO THE LIVING ROOM AT PHOTO LEFT, CLOSED PANEL DOOR TO WALK-IN CLOSET AT PHOTO CENTER LEFT, AND OPEN PANEL DOOR TO BATHROOM NUMBER TWO AT PHOTO RIGHT. OPEN DOOR TO BATHROOM NUMER TWO LOOKS THROUGH TO BEDROOM NUMBER FOUR. VIEW TO SOUTHEAST. - Rush Creek Hydroelectric System, Clubhouse Cottage, Rush Creek, June Lake, Mono County, CA
49 CFR Appendix A to Part 531 - Example of Calculating Compliance Under § 531.5(c)
Code of Federal Regulations, 2010 CFR
2010-10-01
...) Transmission class Description Actualmeasured fuel economy (mpg) Volume 1 PC A FWD 1.8 A5 2-door sedan 34.0 1,500 2 PC A FWD 1.8 M6 2-door sedan 34.6 2,000 3 PC A FWD 2.5 A6 4-door wagon 33.8 2,000 4 PC A AWD 1.8 A6 4-door wagon 34.4 1,000 5 PC A AWD 2.5 M6 2-door hatchback 32.9 3,000 6 PC B RWD 2.5 A6 4-door...
Alarm sensor apparatus for closures
Carlson, J.A.; Stoddard, L.M.
1984-01-31
An alarm sensor apparatus for closures such as doors and windows, and particularly for closures having loose tolerances such as overhead doors, garage doors or the like, the sensor apparatus comprising a pair of cooperating bracket members, one being attached to the door facing or framework and the other to the door member, two magnetic sensor elements carried by said bracket members, the bracket members comprising a pair of cooperating orthogonal guide slots and plates and a stop member engageable with one of the sensors for aligning the sensors with respect to each other in all three orthogonal planes when the door is closed.
Alarm sensor apparatus for closures
Carlson, James A.; Stoddard, Lawrence M.
1986-01-01
An alarm sensor apparatus for closures such as doors and windows, and particularly for closures having loose tolerances such as overhead doors, garage doors or the like, the sensor apparatus comprising a pair of cooperating bracket members, one being attached to the door facing or frame work and the other to the door member, two magnetic sensor elements carried by said bracket members, the bracket members comprising a pair of cooperating orthogonal guide slots and plates and a stop member engageable with one of the sensors for aligning the sensors with respect to each other in all three orthogonal planes when the door is closed.
NASA Astrophysics Data System (ADS)
Baer, E. M.; Wenner, J. M.
2014-12-01
Implementation of "The Math You Need, When You Need It" (TMYN) modules at a wide variety of institutions suggests a broad need for faculty support in helping students develop quantitative skills necessary in introductory geoscience courses. Designed to support students in applying geoscience relevant quantitative skills, TMYN modules are web-based, self-paced and commonly assigned outside of class. They include topics such as calculating slope, rearranging equations, and unit conversions and provide several applications of the mathematical technique to geoscience problems. Each instructor chooses modules that are applicable to the content in his/her individual course and students typically work through the module immediately before the module topic is applied in lab or class. Instructors assigned TMYN modules in their courses at more than 40 diverse institutions, including four-year colleges and universities (4YCs) that vary from non-selective to highly selective and open-door two-year colleges (2YCs). Analysis of module topics assigned, frequency of module use, and institutional characteristics reveals similarities and differences among faculty perception of required quantitative skills and incoming student ability at variably selective institutions. Results indicate that institutional type and selectivity are not correlated with module topic; that is, faculty apply similar quantitative skills in all introductory geoscience courses. For example, nearly every instructor assigned the unit conversions module, whereas very few required the trigonometry module. However, differences in number of assigned modules and faculty expectations are observed between 2YCs and 4YCs (no matter the selectivity). Two-year college faculty typically assign a higher number of modules per course and faculty at 4YCs more often combine portions of multiple modules or cover multiple mathematical concepts in a single assignment. These observations suggest that quantitative skills required for introductory geoscience courses are similar among all higher-education institution types. However, faculty at 4YCs may expect students to acquire and apply multiple quantitative skills in the same class/lab, whereas 2YC faculty may structure assignments to introduce and apply only one quantitative technique at a time.
Traumatic asphyxia--fatal accident in an automatic revolving door.
Cortis, J; Falk, J; Rothschild, M A
2015-09-01
Due to continuing modernisation, the number of automatic doors in routine use, including powered revolving doors, has increased in recent years. Automatic revolving doors are found mostly in department stores, airports, railway stations and hospitals. Although safety arrangements and guidelines concerning the installation of automatic doors are in existence, their disregard in conjunction with obsolete or incorrect installation can lead to fatal accidents. In this report, a 19-month-old boy is described whose right arm was caught between the elements of an automatic revolving door. As a direct result of rescue attempts, the child's body was drawn further into the narrow gap between elements of the door. To get the boy's body out of the 4-cm-wide gap between the fixed outer wall of the revolving door and the revolving inner, back-up batteries had to be disconnected so as to stop the electrical motor powering the door. Cardiopulmonary resuscitation was begun immediately after the rescue but was unsuccessful; the child was declared dead at the hospital he was taken to. The cause of death was a combination of compression-related skull and brain injury together with thoracic compression. This case shows an outstanding example of the preventive aspect as a special task of forensic medicine. Additionally, it serves as a warning for the correct installation and use of automatic revolving doors. Even so, small children should not use these doors on their own, but only with an alert companion, so as to prevent further fatal accidents of this sort.
FACILITY 713, DINING ROOM CABINET DOORS AND DOORS FROM LIVING ...
FACILITY 713, DINING ROOM CABINET DOORS AND DOORS FROM LIVING ROOM TO ENTRY PORCH IN RIGHT BACKGROUND, VIEW FACING NORTHWEST. - Schofield Barracks Military Reservation, Central-Entry Single-Family Housing Type, Between Bragg & Grime Streets near Ayres Avenue, Wahiawa, Honolulu County, HI
Investigations of Shuttle Main Landing Gear Door Environmental Seals
NASA Technical Reports Server (NTRS)
Finkbeiner, Joshua; DeMange, Jeff; Dunlap, Pat; Steinetz, Bruce; Newswander, Daniel
2006-01-01
The Columbia Accident investigation Board (CAIB) requested an investigation into the MLG door seals. Initially, the MLG door seals were thought to have been a potential contributor to the loss of Columbia. These suspicions were later found to be untrue, but the seals remained as a cause for concern in future flights. MLG door seals comprised of thermal barrier and environmental seal. This study focuses on the environmental seal for the MLG door.
7. INTERIOR OF SOUTH MAIN BUILDING ROOM AND OPEN DOOR ...
7. INTERIOR OF SOUTH MAIN BUILDING ROOM AND OPEN DOOR TO SHED ADDITION, OPEN DOOR TO NORTH MAIN BUILDING ROOM, AND CLOSED DOOR TO BATHROOM. VIEW TO NORTHWEST. - Bishop Creek Hydroelectric System, Control Station, Hydrographer's Office, Bishop Creek, Bishop, Inyo County, CA
Glickman, Seth W; Lytle, Barbara L; Ou, Fang-Shu; Mears, Greg; O'Brien, Sean; Cairns, Charles B; Garvey, J Lee; Bohle, David J; Peterson, Eric D; Jollis, James G; Granger, Christopher B
2011-07-01
The ability to rapidly identify patients with ST-segment elevation-myocardial infarction (STEMI) at hospitals without percutaneous coronary intervention (PCI) and transfer them to hospitals with PCI capability is critical to STEMI regionalization efforts. Our objective was to assess the association of prehospital, emergency department (ED), and hospital processes of care implemented as part of a statewide STEMI regionalization program with door-in-door-out times at non-PCI hospitals. Door-in-door-out times for 436 STEMI patients at 55 non-PCI hospitals were determined before (July 2005 to September 2005) and after (January 2007 to March 2007) a year-long implementation of standardized protocols as part of a statewide regionalization program (Reperfusion of Acute Myocardial Infarction in North Carolina Emergency Departments, RACE). The association of 8 system care processes (encompassing emergency medical services [EMS], ED, and hospital settings) with door-in-door-out times was determined using multivariable linear regression. Median door-in-door-out times improved significantly with the intervention (before: 97.0 minutes, interquartile range, 56.0 to 160.0 minutes; after: 58.0 minutes, interquartile range, 35.0 to 90.0 minutes; P<0.0001). Hospital, ED, and EMS care processes were each independently associated with shorter door-in-door-out times (-17.7 [95% confidence interval, -27.5 to -7.9]; -10.1 [95% confidence interval, -19.0 to -1.1], and -7.3 [95% confidence interval, -13.0 to -1.5] minutes for each additional hospital, ED, and EMS process, respectively). Combined, adoption of EMS processes was associated with the shortest median treatment times (44 versus 138 minutes for hospitals that adopted all EMS processes versus none). Prehospital, ED, and hospital processes of care were independently associated with shorter door-in-door-out times for STEMI patients requiring transfer. Adoption of several EMS processes was associated with the largest reduction in treatment times. These findings highlight the need for an integrated, system-based approach to improving STEMI care.
The sound insulations of studio doors. Part 2: Door seals
NASA Astrophysics Data System (ADS)
Plumb, G. D.; Clark, R.
The acoustic performances of a range of proprietary acoustic door seals were measured in the Transmission Suite. The seals were fitted to a standard BBC lead-cored door hung in a purpose-built blockwork wall. As a result of the work, suitable plant-on magnetic perimeter seals and drop-down threshold seals are recommended. The use of these seals will simplify the existing door frame design and should reduce costs without compromising the acoustic performances. The sound insulations were also measured of a range of door blanks with the intention of improving the performances. This work is documented in a companion Report (BBC RD 1994/14).
16 CFR 1211.13 - Inherent force activated secondary door sensors.
Code of Federal Regulations, 2011 CFR
2011-01-01
... sensors. 1211.13 Section 1211.13 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT... § 1211.13 Inherent force activated secondary door sensors. (a) Normal operation test. (1) A force activated door sensor of a door system installed according to the installation instructions shall actuate...
16 CFR 1211.13 - Inherent force activated secondary door sensors.
Code of Federal Regulations, 2014 CFR
2014-01-01
... sensors. 1211.13 Section 1211.13 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT... § 1211.13 Inherent force activated secondary door sensors. (a) Normal operation test. (1) A force activated door sensor of a door system installed according to the installation instructions shall actuate...
16 CFR 1211.13 - Inherent force activated secondary door sensors.
Code of Federal Regulations, 2012 CFR
2012-01-01
... sensors. 1211.13 Section 1211.13 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT... § 1211.13 Inherent force activated secondary door sensors. (a) Normal operation test. (1) A force activated door sensor of a door system installed according to the installation instructions shall actuate...
Code of Federal Regulations, 2010 CFR
2010-01-01
... least one adequate and easily accessible external door. (b) Passenger doors must not be located with...) Each external passenger or crew door must comply with the following requirements: (1) There must be a... the internal locking mechanism is in the locked position. (3) There must be a means of opening which...
AXONOMETRIC, LAUNCH DOOR AND DOOR CYLINDER, LAUNCH PLATFORM ROLLER GUIDE, ...
AXONOMETRIC, LAUNCH DOOR AND DOOR CYLINDER, LAUNCH PLATFORM ROLLER GUIDE, CRIB SUSPENSION SHOCK STRUT, LAUNCH PLATFORM - Dyess Air Force Base, Atlas F Missle Site S-8, Launch Facility, Approximately 3 miles east of Winters, 500 feet southwest of Highway 1770, center of complex, Winters, Runnels County, TX
46 CFR 122.610 - Watertight doors and watertight hatches.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 46 Shipping 4 2010-10-01 2010-10-01 false Watertight doors and watertight hatches. 122.610 Section... Markings Required § 122.610 Watertight doors and watertight hatches. Watertight doors and watertight hatches must be marked on both sides in clearly legible letters at least 25 millimeters (1 inch) high...
46 CFR 122.610 - Watertight doors and watertight hatches.
Code of Federal Regulations, 2012 CFR
2012-10-01
... 46 Shipping 4 2012-10-01 2012-10-01 false Watertight doors and watertight hatches. 122.610 Section... Markings Required § 122.610 Watertight doors and watertight hatches. Watertight doors and watertight hatches must be marked on both sides in clearly legible letters at least 25 millimeters (1 inch) high...
46 CFR 169.747 - Watertight doors and hatches.
Code of Federal Regulations, 2011 CFR
2011-10-01
... 46 Shipping 7 2011-10-01 2011-10-01 false Watertight doors and hatches. 169.747 Section 169.747... Vessel Control, Miscellaneous Systems, and Equipment Markings § 169.747 Watertight doors and hatches. Each watertight door and watertight hatch must be marked on both sides in at least 1-inch letters...
46 CFR 122.610 - Watertight doors and watertight hatches.
Code of Federal Regulations, 2014 CFR
2014-10-01
... 46 Shipping 4 2014-10-01 2014-10-01 false Watertight doors and watertight hatches. 122.610 Section... Markings Required § 122.610 Watertight doors and watertight hatches. Watertight doors and watertight hatches must be marked on both sides in clearly legible letters at least 25 millimeters (1 inch) high...
46 CFR 169.747 - Watertight doors and hatches.
Code of Federal Regulations, 2014 CFR
2014-10-01
... 46 Shipping 7 2014-10-01 2014-10-01 false Watertight doors and hatches. 169.747 Section 169.747... Vessel Control, Miscellaneous Systems, and Equipment Markings § 169.747 Watertight doors and hatches. Each watertight door and watertight hatch must be marked on both sides in at least 1-inch letters...
46 CFR 122.610 - Watertight doors and watertight hatches.
Code of Federal Regulations, 2011 CFR
2011-10-01
... 46 Shipping 4 2011-10-01 2011-10-01 false Watertight doors and watertight hatches. 122.610 Section... Markings Required § 122.610 Watertight doors and watertight hatches. Watertight doors and watertight hatches must be marked on both sides in clearly legible letters at least 25 millimeters (1 inch) high...
46 CFR 169.747 - Watertight doors and hatches.
Code of Federal Regulations, 2013 CFR
2013-10-01
... 46 Shipping 7 2013-10-01 2013-10-01 false Watertight doors and hatches. 169.747 Section 169.747... Vessel Control, Miscellaneous Systems, and Equipment Markings § 169.747 Watertight doors and hatches. Each watertight door and watertight hatch must be marked on both sides in at least 1-inch letters...
46 CFR 169.747 - Watertight doors and hatches.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 46 Shipping 7 2010-10-01 2010-10-01 false Watertight doors and hatches. 169.747 Section 169.747... Vessel Control, Miscellaneous Systems, and Equipment Markings § 169.747 Watertight doors and hatches. Each watertight door and watertight hatch must be marked on both sides in at least 1-inch letters...
46 CFR 122.610 - Watertight doors and watertight hatches.
Code of Federal Regulations, 2013 CFR
2013-10-01
... 46 Shipping 4 2013-10-01 2013-10-01 false Watertight doors and watertight hatches. 122.610 Section... Markings Required § 122.610 Watertight doors and watertight hatches. Watertight doors and watertight hatches must be marked on both sides in clearly legible letters at least 25 millimeters (1 inch) high...
46 CFR 169.747 - Watertight doors and hatches.
Code of Federal Regulations, 2012 CFR
2012-10-01
... 46 Shipping 7 2012-10-01 2012-10-01 false Watertight doors and hatches. 169.747 Section 169.747... Vessel Control, Miscellaneous Systems, and Equipment Markings § 169.747 Watertight doors and hatches. Each watertight door and watertight hatch must be marked on both sides in at least 1-inch letters...
LOFT. Interior view of entry (TAN624) rollup door. Camera is ...
LOFT. Interior view of entry (TAN-624) rollup door. Camera is inside entry building facing south. Rollup door was a modification of the original ANP door arrangement. Date: March 2004. INEEL negative no. HD-39-5-2 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID
11. INTERIOR OF BEDROOM NO. 1 SHOWING OPEN DOOR TO ...
11. INTERIOR OF BEDROOM NO. 1 SHOWING OPEN DOOR TO KITCHEN AT PHOTO LEFT, OPEN DOOR TO WALK-IN CLOSET AT PHOTO LEFT CENTER, AND OPEN DOOR TO BATHROOM AT PHOTO RIGHT. VIEW TO SOUTH. - Bishop Creek Hydroelectric System, Plant 4, Worker Cottage, Bishop Creek, Bishop, Inyo County, CA
16. INTERIOR OF REAR BEDROOM SHOWING BUILTIN COMBINATION CABINET/SLIDING DOOR ...
16. INTERIOR OF REAR BEDROOM SHOWING BUILT-IN COMBINATION CABINET/SLIDING DOOR CLOSET, OPEN FIVE-PANELED DOOR TO KITCHEN AT PHOTO CENTER, AND OPEN SOLID DOOR TO BATHROOM AT PHOTO LEFT. VIEW TO SOUTHEAST. - Bishop Creek Hydroelectric System, Plant 4, Worker Cottage, Bishop Creek, Bishop, Inyo County, CA
13. INTERIOR OF BEDROOM NO. 1 SHOWING OPEN DOOR TO ...
13. INTERIOR OF BEDROOM NO. 1 SHOWING OPEN DOOR TO KITCHEN AT PHOTO LEFT, OPEN DOOR TO WALK-IN CLOSET AT PHOTO CENTER, AND OPEN DOOR TO BATHROOM AT PHOTO RIGHT. VIEW TO NORTHEAST. - Bishop Creek Hydroelectric System, Control Station, Worker Cottage, Bishop Creek, Bishop, Inyo County, CA
INTERIOR DETAIL, SOUTHEAST CABINET NORTH WALL. THE DOORS TO THE ...
INTERIOR DETAIL, SOUTHEAST CABINET NORTH WALL. THE DOORS TO THE LEFT OF THE CHIMNEY MASS OPEN ONTO CLOSETS. ON THE RIGHT, THERE ARE TWO CLOSETS WITH JIB DOORS WITHIN THE CHIMNEY MASS. THE OPEN DOOR CONNECTS WITH THE DRAWING ROOM - The Woodlands, 4000 Woodlands Avenue, Philadelphia, Philadelphia County, PA
Code of Federal Regulations, 2010 CFR
2010-10-01
... 49 Transportation 4 2010-10-01 2010-10-01 false Fire doors. 230.82 Section 230.82 Transportation... Signals, Sanders and Lights § 230.82 Fire doors. (a) General provisions. Each steam locomotive shall have a fire door which shall latch securely when closed and which shall be maintained in a safe and...
77 FR 42016 - Product Change-Every Door Direct Mail-Retail
Federal Register 2010, 2011, 2012, 2013, 2014
2012-07-17
... POSTAL SERVICE Product Change--Every Door Direct Mail--Retail AGENCY: Postal Service\\TM\\. ACTION... Regulatory Commission to add Every Door Direct Mail--Retail to the market-dominant product list within the... Request of the United States Postal Service to Add Every Door Direct Mail--Retail to the Mail...
46 CFR 32.56-35 - Doors-T/ALL.
Code of Federal Regulations, 2011 CFR
2011-10-01
... 46 Shipping 1 2011-10-01 2011-10-01 false Doors-T/ALL. 32.56-35 Section 32.56-35 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY TANK VESSELS SPECIAL EQUIPMENT, MACHINERY, AND HULL REQUIREMENTS... Doors—T/ALL. (a) Casing doors in category A machinery spaces and all elevator doors must be self-closing...
46 CFR 32.56-35 - Doors-T/ALL.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 46 Shipping 1 2010-10-01 2010-10-01 false Doors-T/ALL. 32.56-35 Section 32.56-35 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY TANK VESSELS SPECIAL EQUIPMENT, MACHINERY, AND HULL REQUIREMENTS... Doors—T/ALL. (a) Casing doors in category A machinery spaces and all elevator doors must be self-closing...
46 CFR 108.157 - Locked doors.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 46 Shipping 4 2010-10-01 2010-10-01 false Locked doors. 108.157 Section 108.157 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS DESIGN AND EQUIPMENT... may be designed to lock except— (a) A crash door or a door that has a locking device that can be...
46 CFR 185.610 - Watertight doors and watertight hatches.
Code of Federal Regulations, 2012 CFR
2012-10-01
... 46 Shipping 7 2012-10-01 2012-10-01 false Watertight doors and watertight hatches. 185.610 Section... (UNDER 100 GROSS TONS) OPERATIONS Markings Required § 185.610 Watertight doors and watertight hatches. Watertight doors and watertight hatches must be marked on both sides in clearly legible letters at least 25...
46 CFR 185.610 - Watertight doors and watertight hatches.
Code of Federal Regulations, 2014 CFR
2014-10-01
... 46 Shipping 7 2014-10-01 2014-10-01 false Watertight doors and watertight hatches. 185.610 Section... (UNDER 100 GROSS TONS) OPERATIONS Markings Required § 185.610 Watertight doors and watertight hatches. Watertight doors and watertight hatches must be marked on both sides in clearly legible letters at least 25...
46 CFR 185.610 - Watertight doors and watertight hatches.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 46 Shipping 7 2010-10-01 2010-10-01 false Watertight doors and watertight hatches. 185.610 Section... (UNDER 100 GROSS TONS) OPERATIONS Markings Required § 185.610 Watertight doors and watertight hatches. Watertight doors and watertight hatches must be marked on both sides in clearly legible letters at least 25...
46 CFR 185.610 - Watertight doors and watertight hatches.
Code of Federal Regulations, 2011 CFR
2011-10-01
... 46 Shipping 7 2011-10-01 2011-10-01 false Watertight doors and watertight hatches. 185.610 Section... (UNDER 100 GROSS TONS) OPERATIONS Markings Required § 185.610 Watertight doors and watertight hatches. Watertight doors and watertight hatches must be marked on both sides in clearly legible letters at least 25...
46 CFR 185.610 - Watertight doors and watertight hatches.
Code of Federal Regulations, 2013 CFR
2013-10-01
... 46 Shipping 7 2013-10-01 2013-10-01 false Watertight doors and watertight hatches. 185.610 Section... (UNDER 100 GROSS TONS) OPERATIONS Markings Required § 185.610 Watertight doors and watertight hatches. Watertight doors and watertight hatches must be marked on both sides in clearly legible letters at least 25...
16 CFR § 1211.13 - Inherent force activated secondary door sensors.
Code of Federal Regulations, 2013 CFR
2013-01-01
... sensors. § 1211.13 Section § 1211.13 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER... Standard § 1211.13 Inherent force activated secondary door sensors. (a) Normal operation test. (1) A force activated door sensor of a door system installed according to the installation instructions shall actuate...
77 FR 58785 - Airworthiness Directives; Airbus Airplanes
Federal Register 2010, 2011, 2012, 2013, 2014
2012-09-24
...-620, B4-605R, and B4-622R airplanes. This proposed AD was prompted by a report that the door frame... operate safely. This proposed AD would require reinforcing of the door frame shells of passenger doors 2... door frame shells, which could result in in-flight decompression of the airplane and consequent injury...
46 CFR 170.270 - Door design, operation, installation, and testing.
Code of Federal Regulations, 2012 CFR
2012-10-01
... 46 Shipping 7 2012-10-01 2012-10-01 false Door design, operation, installation, and testing. 170.270 Section 170.270 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SUBDIVISION AND STABILITY STABILITY REQUIREMENTS FOR ALL INSPECTED VESSELS Watertight Bulkhead Doors § 170.270 Door design, operation, installation, and testing. (a...
46 CFR 170.270 - Door design, operation, installation, and testing.
Code of Federal Regulations, 2014 CFR
2014-10-01
... 46 Shipping 7 2014-10-01 2014-10-01 false Door design, operation, installation, and testing. 170.270 Section 170.270 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SUBDIVISION AND STABILITY STABILITY REQUIREMENTS FOR ALL INSPECTED VESSELS Watertight Bulkhead Doors § 170.270 Door design, operation, installation, and testing. (a...
46 CFR 170.270 - Door design, operation, installation, and testing.
Code of Federal Regulations, 2013 CFR
2013-10-01
... 46 Shipping 7 2013-10-01 2013-10-01 false Door design, operation, installation, and testing. 170.270 Section 170.270 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SUBDIVISION AND STABILITY STABILITY REQUIREMENTS FOR ALL INSPECTED VESSELS Watertight Bulkhead Doors § 170.270 Door design, operation, installation, and testing. (a...
10. INTERIOR OF BEDROOM NUMBER ONE SHOWING OPEN PANEL DOOR ...
10. INTERIOR OF BEDROOM NUMBER ONE SHOWING OPEN PANEL DOOR TO LIVING ROOM AT EXTREME PHOTO RIGHT, OPEN DOOR TO BATHROOM AT PHOTO CENTER, AND OPEN PANEL DOOR TO WALK-IN CLOSET AT PHOTO LEFT. VIEW TO NORTHEAST. - Rush Creek Hydroelectric System, Worker Cottage, Rush Creek, June Lake, Mono County, CA
24. INTERIOR OF BEDROOM NUMBER FOUR SHOWING OPEN DOOR TO ...
24. INTERIOR OF BEDROOM NUMBER FOUR SHOWING OPEN DOOR TO BATHROOM NUMBER TWO AT PHOTO LEFT, OPEN PANEL DOOR TO WALK-IN CLOSET AT PHOTO LEFT CENTER, AND OPEN DOOR TO LIVING ROOM AT PHOTO RIGHT CENTER. VIEW TO NORTH. - Rush Creek Hydroelectric System, Clubhouse Cottage, Rush Creek, June Lake, Mono County, CA
17. INTERIOR OF BEDROOM NO. 2 SHOWING OPEN DOOR TO ...
17. INTERIOR OF BEDROOM NO. 2 SHOWING OPEN DOOR TO LIVING ROOM AT PHOTO RIGHT, OPEN DOOR TO WALK-IN CLOSET AT PHOTO CENTER RIGHT, AND OPEN DOOR TO BATHROOM AT PHOTO CENTER. VIEW TO WEST. - Bishop Creek Hydroelectric System, Control Station, Worker Cottage, Bishop Creek, Bishop, Inyo County, CA
13. SOUTH BEDROOM INTERIOR SHOWING OPEN DOOR TO WALKIN CLOSET ...
13. SOUTH BEDROOM INTERIOR SHOWING OPEN DOOR TO WALKIN CLOSET AT PHOTO CENTER, OPEN DOOR TO LIVING ROOM AT PHOTO RIGHT, AND OPEN DOOR TO BATHROOM AT PHOTO LEFT. VIEW TO NORTH. - Big Creek Hydroelectric System, Big Creek Town, Operator House, Orchard Avenue south of Huntington Lake Road, Big Creek, Fresno County, CA
Code of Federal Regulations, 2010 CFR
2010-10-01
... 46 Shipping 3 2010-10-01 2010-10-01 false Fire doors. 78.47-35 Section 78.47-35 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) PASSENGER VESSELS OPERATIONS Markings for Fire and Emergency Equipment, Etc. § 78.47-35 Fire doors. (a) All doors in main vertical zone bulkheads or stairway...
Code of Federal Regulations, 2012 CFR
2012-04-01
... certification program for exterior insulated steel door systems. 200.949 Section 200.949 Housing and Urban... program for exterior insulated steel door systems. (a) Applicable standards. (1) All Exterior Insulated Steel Door Systems shall be designed, manufactured, and tested in compliance with the following...
Code of Federal Regulations, 2013 CFR
2013-04-01
... certification program for exterior insulated steel door systems. 200.949 Section 200.949 Housing and Urban... program for exterior insulated steel door systems. (a) Applicable standards. (1) All Exterior Insulated Steel Door Systems shall be designed, manufactured, and tested in compliance with the following...
16 CFR 1211.15 - Field-installed labels.
Code of Federal Regulations, 2010 CFR
2010-01-01
... a child running toward or under a garage door. A red prohibition symbol (slash, oriented from the... automatic garage door resulting in severe injury or death.” (2) Avoidance Statements— (i) “Do not allow children to walk or run under a closing door.” (ii) “Do not allow children to operate door operator...
Motor actuated vacuum door. [for photography from sounding rockets
NASA Technical Reports Server (NTRS)
Hanagud, A. V.
1986-01-01
Doors that allow scientific instruments to record and retrieve the observed data are often required to be designed and installed as a part of sounding rocket hardware. The motor-actuated vacuum door was designed to maintain a medium vacuum of the order of 0.0001 torr or better while closed, and to provide an opening 15 inches long x 8.5 inches wide while open for cameras to image Halley's comet. When the electric motor receives the instruction to open the door through the payload battery, timer, and relay circuit, the first operation is to unlock the door. After unlatching, the torque transmitted by the motor to the main shaft through the links opens the door. A microswitch actuator, which rides on the linear motion conversion mechanism, is adjusted to trip the limit switch at the end of the travel. The process is repeated in the reverse order to close the door. 'O' rings are designed to maintain the seal. Door mechanisms similar to the one described have flown on Aerobee 17.018 and Black Brant 27.047 payloads.
Research on some auxiliary mechanisms used in passenger cars
NASA Astrophysics Data System (ADS)
Antonescu, Daniela; Iozsa, Daniel; Antonescu, Ovidiu; Fratila, Gh.
2017-10-01
The paper presents the results of researches on the topological structure and geometrical analysis of the planar mechanisms with articulated bars, which are used for actuating the doors of cars. The main five types of car doors with rotate movement (folding) are presented, being described both as constructive structure and mode of operation, through suitable kinematic schemes. Some innovative solutions for vehicle door actuating mechanisms aim to use as little space as possible, which is beneficial for car parking. There are three types of car door movements: rotation, sliding and planar rotational-sliding. Most of the cars are equipped with folding doors, where the rotate movement is limited and operates horizontally. Almost all sliding doors are placed on the rear of the car (only for passengers, not for driver). Unlike rotate doors, the sliding doors require a minimum lateral space, which is an advantage, especially in parking places. In the end of the paper, a kinematic analysis of the canopy 4-bar mechanism has been performed, in order to increase the passenger comfort on the access into the vehicle.
Better gas tight access doors for power plants
DOE Office of Scientific and Technical Information (OSTI.GOV)
Rutledge, C.K.; Emsbo, J.
1996-12-31
This paper presents useful information concerning access doors for equipment at power plants and similar industries. Such doors are used for: Boilers and Boiler Penthouses Economizers and Air Heaters Gas Ducts and Precipitators Baghouses, Absorbers and Stacks. Easy access into such equipment by personnel enhances the speed and thoroughness with which inspections and maintenance tasks are performed. This paper shows how to select and correctly install new doors or replace older models which may cumbersome to operate or unable to seal properly. Good, gas tight access doors should not be overlooked as a contributor to top performance at power plants.more » Loss of efficiency or interior deterioration due to leakage are obvious targets and should be of prime concern. However, the ease of access may be equally important. Lasting reliability of any type of industrial equipment is usually a function of two things: First, the quality and care in design, manufacture and installation. Second, the ability and dedication to maintain the equipment. If the ability or dedication to maintain the equipment is diminished it will impact on the lasting reliability of even the best designed equipment. Extensive engineering efforts, many pages of specifications and large sums of money are used on new power plants to assure practical, adequate and safe access to all parts of the equipment. Many times this is in stark contrast to the money and efforts used on the access doors, through which personnel has to enter for inspection and maintenance. This paper highlights the basic functions which should be expected from all types of access doors. The special functions which should be expected from all types of access doors. The special functions required by individual door types are also explained. This includes all the door types serving the different applications all the way along the gas passage from the high temperature boiler doors to the corrosion resistant doors for absorbers and stacks.« less
Kierkegaard, Marie; Harms-Ringdahl, Karin; Edström, Lars; Widén Holmqvist, Lotta; Tollbäck, Anna
2011-07-01
To investigate the feasibility and effects of a physical exercise programme on functioning and health-related quality of life in adults with myotonic dystrophy type 1. A randomized controlled trial. Thirty-five adults with myotonic dystrophy type 1. After stratification for level of functioning, study participants were assigned by lot to either a training group or a control group. Training-group participants attended a 60-minute comprehensive group-training programme, Friskis&Svettis® Open Doors, twice a week for 14 weeks. The six-minute walk test was the primary outcome measure and the timed-stands test, the timed up-and-go test, the Epworth sleepiness scale and the Short Form-36 health survey were secondary outcome measures. Intention-to-treat analyses revealed no significant differences in any outcome measures, except for an increased between-group difference after intervention in the Short Form-36 mental health subscale and a decrease in the vitality subscale for the control group. The programme was well tolerated and many training-group participants perceived subjective changes for the better. No negative effects were reported. The Friskis&Svettis® Open Doors programme was feasible for adults with myotonic dystrophy type 1 who had been screened for cardiac involvement, had distal or mild-to-moderate proximal muscle impairment, and no severe cognitive impairments. No beneficial or detrimental effects were evident.
UHM/HNEI EV test and evaluation program
NASA Astrophysics Data System (ADS)
1992-03-01
The electric vehicle (EV) program of the Hawaii Natural Energy Institute (HNEI) focuses primarily on the field testing of promising EV/traction batteries. The intent is to utilize typical driving cycles to develop information that verifies or refutes what is obtained in the laboratory. Three different types of batteries were assigned by the U.S. DOE for testing in this program: Sonnenschein Dryfit 6V-160, Exide GC-5, Trojan T-145. We added the following battery to the test program: ALCO2200. The following EVs were chosen in our program: Converted Ford Escort station wagon, Converted Ford Escort two-door sedan, Converted Ford Escort two-door sedan, Converted Dodge van. Based on capacity tests, corrective action such as battery replacement, additional charging, adjusting terminal connections, etc., may be taken to maintain good performance. About 15,500 miles and 600 cycles have been accumulated on the Sonnenschein Dryfit 6V-160 battery pack. Five of its 18 modules have been changed. Based on DOE's standard, the battery has reached the end of its useful life. Nevertheless, the battery pack is still operational and its operating range is still greater than 40 miles per charge. It is too early to evaluate the life expectancy of the other three batteries. No module has been replaced in these three packs. HNEI will keep the Trojan and Exide battery packs in operation. The Alco 2200 batteries will be transferred to another vehicle.
10. INTERIOR OF SOUTH SIDE ENCLOSED SCREEN PORCH SHOWING 1/2 ...
10. INTERIOR OF SOUTH SIDE ENCLOSED SCREEN PORCH SHOWING 1/2 SCREEN DOOR TO EXTERIOR AND DOUBLE FRENCH DOORS TO DINING ROOM. HOLE AT BOTTOM LEFT OF 1/2 SCREEN DOOR WAS A CAT DOOR. VIEW TO EAST. - Big Creek Hydroelectric System, Powerhouse 8, Operator Cottage, Big Creek, Big Creek, Fresno County, CA
30 CFR 77.303 - Hot gas inlet chamber dropout doors.
Code of Federal Regulations, 2014 CFR
2014-07-01
... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Hot gas inlet chamber dropout doors. 77.303... COAL MINES Thermal Dryers § 77.303 Hot gas inlet chamber dropout doors. Thermal dryer systems which employ a hot gas inlet chamber shall be equipped with drop-out doors at the bottom of the inlet chamber...
30 CFR 77.303 - Hot gas inlet chamber dropout doors.
Code of Federal Regulations, 2011 CFR
2011-07-01
... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Hot gas inlet chamber dropout doors. 77.303... COAL MINES Thermal Dryers § 77.303 Hot gas inlet chamber dropout doors. Thermal dryer systems which employ a hot gas inlet chamber shall be equipped with drop-out doors at the bottom of the inlet chamber...
30 CFR 77.303 - Hot gas inlet chamber dropout doors.
Code of Federal Regulations, 2013 CFR
2013-07-01
... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Hot gas inlet chamber dropout doors. 77.303... COAL MINES Thermal Dryers § 77.303 Hot gas inlet chamber dropout doors. Thermal dryer systems which employ a hot gas inlet chamber shall be equipped with drop-out doors at the bottom of the inlet chamber...
30 CFR 77.303 - Hot gas inlet chamber dropout doors.
Code of Federal Regulations, 2012 CFR
2012-07-01
... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Hot gas inlet chamber dropout doors. 77.303... COAL MINES Thermal Dryers § 77.303 Hot gas inlet chamber dropout doors. Thermal dryer systems which employ a hot gas inlet chamber shall be equipped with drop-out doors at the bottom of the inlet chamber...
16 CFR 1211.13 - Inherent force activated secondary door sensors.
Code of Federal Regulations, 2010 CFR
2010-01-01
... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Inherent force activated secondary door... § 1211.13 Inherent force activated secondary door sensors. (a) Normal operation test. (1) A force... when the door applies a 15 pound (66.7 N) or less force in the down or closing direction and when the...
75 FR 7370 - Federal Motor Vehicle Safety Standards; Door Locks and Door Retention Components
Federal Register 2010, 2011, 2012, 2013, 2014
2010-02-19
... at (202) 366-2990. For legal issues, contact Ms. Sarah Alves, Office of the Chief Counsel, by... have secondary latching positions and to remove the option for a visual door closure warning system... test plates; and, S4, to reinstate an exclusion of doors equipped with wheelchair lift systems. This...
46 CFR 173.057 - Permitted locations for Class I watertight doors.
Code of Federal Regulations, 2013 CFR
2013-10-01
... STABILITY SPECIAL RULES PERTAINING TO VESSEL USE School Ships § 173.057 Permitted locations for Class I watertight doors. (a) Class I doors are permitted in any location on a sailing school vessel which has a mean... 46 Shipping 7 2013-10-01 2013-10-01 false Permitted locations for Class I watertight doors. 173...
46 CFR 173.057 - Permitted locations for Class I watertight doors.
Code of Federal Regulations, 2011 CFR
2011-10-01
... STABILITY SPECIAL RULES PERTAINING TO VESSEL USE School Ships § 173.057 Permitted locations for Class I watertight doors. (a) Class I doors are permitted in any location on a sailing school vessel which has a mean... 46 Shipping 7 2011-10-01 2011-10-01 false Permitted locations for Class I watertight doors. 173...
46 CFR 173.057 - Permitted locations for Class I watertight doors.
Code of Federal Regulations, 2010 CFR
2010-10-01
... STABILITY SPECIAL RULES PERTAINING TO VESSEL USE School Ships § 173.057 Permitted locations for Class I watertight doors. (a) Class I doors are permitted in any location on a sailing school vessel which has a mean... 46 Shipping 7 2010-10-01 2010-10-01 false Permitted locations for Class I watertight doors. 173...
46 CFR 173.057 - Permitted locations for Class I watertight doors.
Code of Federal Regulations, 2014 CFR
2014-10-01
... STABILITY SPECIAL RULES PERTAINING TO VESSEL USE School Ships § 173.057 Permitted locations for Class I watertight doors. (a) Class I doors are permitted in any location on a sailing school vessel which has a mean... 46 Shipping 7 2014-10-01 2014-10-01 false Permitted locations for Class I watertight doors. 173...
46 CFR 173.057 - Permitted locations for Class I watertight doors.
Code of Federal Regulations, 2012 CFR
2012-10-01
... STABILITY SPECIAL RULES PERTAINING TO VESSEL USE School Ships § 173.057 Permitted locations for Class I watertight doors. (a) Class I doors are permitted in any location on a sailing school vessel which has a mean... 46 Shipping 7 2012-10-01 2012-10-01 false Permitted locations for Class I watertight doors. 173...
Federal Register 2010, 2011, 2012, 2013, 2014
2010-05-21
... caution light CABIN DOOR signaling both MED Improper Closure and MED Inflatable Seal Failure into two separate lights: CABIN DOOR and CABIN DOOR SEAL. 2. Converting the separated CABIN DOOR Caution light into a Warning light by changing its color to red. Note: Aircraft Flight Manuals (AFM'S) refer to these...
Door Locking Options in Schools
ERIC Educational Resources Information Center
National Clearinghouse for Educational Facilities, 2009
2009-01-01
Doors serve a variety of needs and purposes in schools: (1) Exterior doors provide building security and protection from the elements; and (2) Interior doors control the movement of people among school spaces, help control noise and air flow, and act as flame and smoke barriers during a fire. In a lockdown, they serve as safety barriers. From a…
Code of Federal Regulations, 2010 CFR
2010-10-01
... boundary in which the doors are fitted; (5) Door frames must be of rigid construction and provide at least... inches) square. A self-closing hinged or pivoted steel or equivalent material cover must be fitted in the...) A door in a bulkhead required to be A-60, A-30, or A-15 Class must be of hollow steel or equivalent...
Code of Federal Regulations, 2011 CFR
2011-10-01
... boundary in which the doors are fitted; (5) Door frames must be of rigid construction and provide at least... inches) square. A self-closing hinged or pivoted steel or equivalent material cover must be fitted in the...) A door in a bulkhead required to be A-60, A-30, or A-15 Class must be of hollow steel or equivalent...
Apparatus for transporting hazardous materials
Osterman, Robert A.; Cox, Robert
1992-01-01
An apparatus and method are provided for selectively receiving, transporting, and releasing one or more radioactive or other hazardous samples for analysis on a differential thermal analysis (DTA) apparatus. The apparatus includes a portable sample transporting apparatus for storing and transporting the samples and includes a support assembly for supporting the transporting apparatus when a sample is transferred to the DTA apparatus. The transporting apparatus includes a storage member which includes a plurality of storage chambers arrayed circumferentially with respect to a central axis. An adjustable top door is located on the top side of the storage member, and the top door includes a channel capable of being selectively placed in registration with the respective storage chambers thereby permitting the samples to selectively enter the respective storage chambers. The top door, when closed, isolates the respective samples within the storage chambers. A plurality of spring-biased bottom doors are located on the bottom sides of the respective storage chambers. The bottom doors isolate the samples in the respective storage chambers when the bottom doors are in the closed position. The bottom doors permit the samples to leave the respective storage chambers from the bottom side when the respective bottom doors are in respective open positions. The bottom doors permit the samples to be loaded into the respective storage chambers after the analysis for storage and transport to a permanent storage location.
Comparing energy use and environmental emissions of reinforced wood doors and steel doors
Lynn Knight; Melissa Huff; Janet I. Stockhausen; Robert J. Ross
2005-01-01
The USDA Forest Service Forest Products Laboratory has patented a technology that incorporates fiberglass-reinforced wood into the structure of wood doors and other wood building products. The process of reinforcing wood doors with epoxy and fiberglass increases the strength and durability of the product. Also, it allows the use of low-value, small-diameter wood which...
Entry door with sidelights, southwest looking northeast. Reverse view of ...
Entry door with sidelights, southwest looking northeast. Reverse view of HABS ME-229-6, more clarity to the newel post and balusters. The curve of the second floor landing is just visible at the top of the image. Note the six-panel entry door is taller than the interior doors. - Samuel P. Grindle House, 13 School Street, Castine, Hancock County, ME
75 FR 19458 - Petition for Exemption From the Vehicle Theft Prevention Standard; Nissan
Federal Register 2010, 2011, 2012, 2013, 2014
2010-04-14
... vehicle itself from being stolen when the back door and all of the side doors are closed and locked. If... occurs when the ignition is turned to the ``OFF'' position and all the doors are closed and locked through the use of the key or the remote control mechanism. Deactivation occurs when all the doors are...
76 FR 36615 - Petition for Exemption From the Vehicle Theft Prevention Standard; Nissan
Federal Register 2010, 2011, 2012, 2013, 2014
2011-06-22
... from being stolen when the back door and all of the side doors are closed and locked. If any of the... the ``OFF'' position and all the doors are closed and locked through the use of the key or the remote control mechanism. Deactivation occurs when all the doors are unlocked with the key or remote [[Page 36616...
77 FR 15843 - Petition for Exemption From the Vehicle Theft Prevention Standard; Nissan
Federal Register 2010, 2011, 2012, 2013, 2014
2012-03-16
... vehicle and the vehicle itself from being stolen when the back door and all of the side doors are closed... automatically when the ignition key is turned to the ``OFF'' position and all the doors are closed and locked through the use of the key or the remote control mechanism. Deactivation occurs when all the doors are...
Federal Register 2010, 2011, 2012, 2013, 2014
2010-01-12
... frames, upper deck floor beams, electronic bay access door cutout, nose wheel well, and main entry doors... intervals for certain airplanes. This AD results from fatigue tests and analysis that identified additional... frames, upper deck floor beams, electronic bay access door cutout, nose wheel well, and main entry doors...
An unexpected knock on Corrigan's secret door.
Woywodt, Alexander
2010-10-01
Corrigan's secret door describes a metaphorical escape route for busy physicians. The term was derived from the successful and exceptionally busy professional life of Irish physician Dominic John Corrigan (1802-80). It is claimed that Corrigan's outpatient clinic was so busy that he required a secret door in his consulting rooms to escape from the ever-growing queue of eager patients. The origins of this charming story are unknown, and the door may have never existed. However, at present, Corrigan's secret door is often quoted when busy physicians have their own little ways in surviving a stressful professional life. Generations of British-trained doctors have grown up with Corrigan's secret door, as it was featured in the introduction of the Oxford Handbook of Clinical Medicine. Accordingly, trainees as well as more senior doctors are often reminded that having a 'secret door' is vital in surviving in the medical profession. My own escape is through classical music and the violoncello, in particular. As the name implies, my own secret door is normally invisible to colleagues and patients. This little article is about a patient who found me out, and a reflection on the role of classical music and the cello in my professional life.
Holiday Door Decorating Contest Brings Cheer | Poster
By Carolynne Keenan, Contributing Writer Other than the time of year, what do the following have in common: the leg lamp from the movie “A Christmas Story,” a compilation of silly holiday jokes, a gingerbread house, and Santa on a motorcycle? All four were among the individual door winners for the Holiday Door Decorating Contest, held at NCI at Frederick in December. Employees dressed up their office doors, hallways, and even stairwells to participate. Entries for the contest included individual office doors as well as groups. Some employees even “decked the halls” of whole office buildings to participate.
Federal Register 2010, 2011, 2012, 2013, 2014
2013-01-17
... comments concerning the Cooling-Off Rule must be received no later than March 4, 2013. ADDRESSES..., declares it an unfair and deceptive act or practice for a seller engaged in a door-to-door sale \\4\\ of...- Substantive Amendments to the Rule, 60 FR 54180 (Oct. 20, 1995). \\4\\ Door-to-door sales includes sales, leases...
Getting Children to Do More Academic Work: Foot-in-the-Door versus Door-in-the-Face
ERIC Educational Resources Information Center
Chan, Annie Cheuk-ying; Au, Terry Kit-fong
2011-01-01
In this study we explored whether compliance-without-pressure techniques, known to encourage adults to behave more altruistically, can be used to encourage children to do more academic work. Using three different approaches--Foot-in-the-Door, Door-in-the-Face, and Single-Request--we asked 60 6- to 8-year-old Hong Kong Chinese children to complete…
NASA Astrophysics Data System (ADS)
Chaibub Neto, Elias
2016-11-01
Clinical trials traditionally employ blinding as a design mechanism to reduce the influence of placebo effects. In practice, however, it can be difficult or impossible to blind study participants and unblinded trials are common in medical research. Here we show how instrumental variables can be used to quantify and disentangle treatment and placebo effects in randomized clinical trials comparing control and active treatments in the presence of confounders. The key idea is to use randomization to separately manipulate treatment assignment and psychological encouragement conversations/interactions that increase the participants’ desire for improved symptoms. The proposed approach is able to improve the estimation of treatment effects in blinded studies and, most importantly, opens the doors to account for placebo effects in unblinded trials.
Del Cimmuto, Angela; Mannocci, Alice; Ribatti, Domenico; Boccia, Antonio; La Torre, Giuseppe
2014-06-01
The objectives of the present study were to evaluate knowledge among general population about the risks factors of waste management, to estimate the feeling of anxiety concerning the waste, and to compare knowledge of two different methods for collecting municipal solid waste (MSW): a street separate collection system and a door-to-door separate collection system. A cross-sectional study was performed, administering an anonymous questionnaire to 180 inhabitants in Aprilia, Latium, Italy. The study sample consisted of 183 citizens: 64 in the intervention group and 119 in the control group. The intervention was represented by a campaign of door-to-door collection. The correct implementation of separate collection of waste was 87.5% in the intervention group and 63% in the control group (p<0.001). For both groups, the favourite type of waste collection was door-to-door (p=0.013); a high difference concerning the quality of information was found (p<0.0001): in the intervention group, 84% declared to be satisfied (67% sufficient and 17.2% good), while in the control group, 21% declared to be satisfied (16.8% sufficient and 4.2% good). The advice mainly reported from the control group respondents was to increase the size of the information pack (80.7%, p=0.024). The information campaign seemed to increase people's awareness about the problem, improving the management of waste and household waste. The door-to-door collection was appreciated and preferred by both groups. The adoption of a door-to-door scheme seems to be a winning option mostly because it is supported by an information and education system for the citizens. © The Author(s) 2014.
14 CFR 23.813 - Emergency exit access.
Code of Federal Regulations, 2010 CFR
2010-01-01
... the door is subjected to the inertia loads resulting from the ultimate static load factors prescribed... it by the door when the door is subjected to the inertia loads resulting from the ultimate static...
14 CFR 23.813 - Emergency exit access.
Code of Federal Regulations, 2013 CFR
2013-01-01
... the door is subjected to the inertia loads resulting from the ultimate static load factors prescribed... it by the door when the door is subjected to the inertia loads resulting from the ultimate static...
14 CFR 23.813 - Emergency exit access.
Code of Federal Regulations, 2014 CFR
2014-01-01
... the door is subjected to the inertia loads resulting from the ultimate static load factors prescribed... it by the door when the door is subjected to the inertia loads resulting from the ultimate static...
14 CFR 23.813 - Emergency exit access.
Code of Federal Regulations, 2012 CFR
2012-01-01
... the door is subjected to the inertia loads resulting from the ultimate static load factors prescribed... it by the door when the door is subjected to the inertia loads resulting from the ultimate static...
14 CFR 23.813 - Emergency exit access.
Code of Federal Regulations, 2011 CFR
2011-01-01
... the door is subjected to the inertia loads resulting from the ultimate static load factors prescribed... it by the door when the door is subjected to the inertia loads resulting from the ultimate static...
Novel Door-opening Method for Six-legged Robots Based on Only Force Sensing
NASA Astrophysics Data System (ADS)
Chen, Zhi-Jun; Gao, Feng; Pan, Yang
2017-09-01
Current door-opening methods are mainly developed on tracked, wheeled and biped robots by applying multi-DOF manipulators and vision systems. However, door-opening methods for six-legged robots are seldom studied, especially using 0-DOF tools to operate and only force sensing to detect. A novel door-opening method for six-legged robots is developed and implemented to the six-parallel-legged robot. The kinematic model of the six-parallel-legged robot is established and the model of measuring the positional relationship between the robot and the door is proposed. The measurement model is completely based on only force sensing. The real-time trajectory planning method and the control strategy are designed. The trajectory planning method allows the maximum angle between the sagittal axis of the robot body and the normal line of the door plane to be 45º. A 0-DOF tool mounted to the robot body is applied to operate. By integrating with the body, the tool has 6 DOFs and enough workspace to operate. The loose grasp achieved by the tool helps release the inner force in the tool. Experiments are carried out to validate the method. The results show that the method is effective and robust in opening doors wider than 1 m. This paper proposes a novel door-opening method for six-legged robots, which notably uses a 0-DOF tool and only force sensing to detect and open the door.
INTERIOR DETAIL, NORTH GARRET DOOR. THE WIRES VISIBLE ABOVE THE ...
INTERIOR DETAIL, NORTH GARRET DOOR. THE WIRES VISIBLE ABOVE THE DOOR ARE REMNANTS OF AN EARLY ELECTRICAL SYSTEM INSTALLED BY THE CEMETERY COMPANY - The Woodlands, 4000 Woodlands Avenue, Philadelphia, Philadelphia County, PA
24 CFR 3280.113 - Glass and glazed openings.
Code of Federal Regulations, 2010 CFR
2010-04-01
... Glass and glazed openings. (a) Windows and sliding glass doors. All windows and sliding glass doors shall meet the requirements of § 3280.403 the “Standard for Windows and Sliding Glass Doors Used in...
Detail view from the east of the west door in ...
Detail view from the east of the west door in the Grand Banqueting Hall. Note plaster turkey ornament in the door pediment. - Masonic Temple, 1 North Broad Street, Philadelphia, Philadelphia County, PA
23. POWELLTYPE CAR THROUGH GRIP REMOVAL DOOR: View looking through ...
23. POWELL-TYPE CAR THROUGH GRIP REMOVAL DOOR: View looking through grip removal door into interior of a Powell-type cable car. - San Francisco Cable Railway, Washington & Mason Streets, San Francisco, San Francisco County, CA
VIEW THROUGH AN ORIGINAL DOOR OF AIRLOCK TO A MODERN ...
VIEW THROUGH AN ORIGINAL DOOR OF AIRLOCK TO A MODERN REPLACEMENT DOOR ON OPPOSITE SIDE. - U.S. Naval Base, Pearl Harbor, Bombproof Communication Center, Hornet Avenue at Liscome Bay Street, Pearl City, Honolulu County, HI
12. CAPSTANS OF FRONT DECK. MIDDLE DOOR IS OPEN. ALL ...
12. CAPSTANS OF FRONT DECK. MIDDLE DOOR IS OPEN. ALL DOORS COULD OPEN, TO GIVE OPERATOR AN UNIMPEDED VIEW. - Dredge CINCINNATI, Docked on Ohio River at foot of Lighthill Street, Pittsburgh, Allegheny County, PA
Detail view of the west elevation entrance door, showing the ...
Detail view of the west elevation entrance door, showing the door knocker & house numbers (Duplicate view of HABS DC-832-3) - Clements-de Sibour House, 1539 Twenty-ninth Street, Northwest, Washington, District of Columbia, DC
29. BEDROOM #3 INTERIOR SHOWING DOUBLE FRENCH DOORS TO SCREENED ...
29. BEDROOM #3 INTERIOR SHOWING DOUBLE FRENCH DOORS TO SCREENED PORCH AND FIVE-PANELED DOOR TO HALL. VIEW TO WEST. - Big Creek Hydroelectric System, Powerhouse 8, Operator Cottage, Big Creek, Big Creek, Fresno County, CA
2. EXTERIOR FRONT (SOUTHEAST) SIDE OF BUILDING 117 SHOWING MAIN ...
2. EXTERIOR FRONT (SOUTHEAST) SIDE OF BUILDING 117 SHOWING MAIN RESIDENTIAL STREET IN LOWER FOREGROUND, CEMENT-LAID ROCK RETAINING WALL IN FRONT OF HOUSE, AND CONCRETE STEPS AND WALKWAY TO FRONT PORCH AND DOOR. NOTE SLIDING GLASS DOOR REPLACEMENT FOR ORIGINAL DOOR WHICH HAS SUBSEQUENTLY BEEN REMODELED BACK TO A SINGLE ENTRY DOOR. VIEW TO NORTHWEST. - Bishop Creek Hydroelectric System, Plant 4, Worker Cottage, Bishop Creek, Bishop, Inyo County, CA
27. View of entry door to vestibule to MWOC entry ...
27. View of entry door to vestibule to MWOC entry door in transmitter building no. 102 (note coded key pad to left and intercom phone on left) and door to the central systems monitor room (CSMR) to right (out of sight). - Clear Air Force Station, Ballistic Missile Early Warning System Site II, One mile west of mile marker 293.5 on Parks Highway, 5 miles southwest of Anderson, Anderson, Denali Borough, AK
Development of a tornado safe room door from wood Products: door design and impact testing
Robert H. Falk; James J. Bridwell
2016-01-01
In this study, a tornado safe room door built from wood products and steel sheeting was developed and impact-tested according to tornado safe room standards. Results indicate that an door constructed from as few as two sheets of 23/32-in. (18.26-mm) construction-grade plywood and overlaid with 18-gauge (0.05-in.- (1.27- mm-) thick) steel can pass the required impact...
17. INTERIOR OF BEDROOM NUMBER TWO SHOWING OPEN DOOR TO ...
17. INTERIOR OF BEDROOM NUMBER TWO SHOWING OPEN DOOR TO BATHROOM NUMBER ONE AT EXTREME PHOTO LEFT, OPEN PANEL DOOR TO THE WALK-IN CLOSET AT PHOTO CENTER LEFT, OPEN PANEL DOOR TO HALL AT PHOTO CENTER RIGHT, AND A 6-LIGHT OVER 1-LIGHT SASH WINDOW ON THE WEST WALL AT PHOTO RIGHT. VIEW TO SOUTH. - Rush Creek Hydroelectric System, Clubhouse Cottage, Rush Creek, June Lake, Mono County, CA
Investigations of Shuttle Main Landing Gear Door Environmental Seals
NASA Technical Reports Server (NTRS)
Finkbeiner, Joshua; Dunlap, Pat; Steinetz, Bruce; DeMango, Jeff; Newswander, Daniel
2005-01-01
The environmental seals for the main landing gear doors of the Shuttle Orbiters were raised by the Columbia Accident Investigation Board as a potential safety concern. Inspections of seals installed on the Shuttle Discovery revealed that they were permanently deformed and no longer met certified seal compression requirements. Replacement of the seals led to the inability to fully close the main landing gear doors. Johnson Space Center requested that Glenn Research Center conduct tests on the main landing gear door environmental seals to assist in installing the seals in a manner to allow the main landing gear doors to fully close. Further testing was conducted to fill out the seal performance database. Results from the testing indicated that the method of bonding the seals was important in reducing seal loads on the main landing gear doors. Also, the replacement seals installed in Shuttle Discovery were found to have leakage performance sufficient to meet the certification requirements.
A Ferris Wheel Accident at a Movable Amusement Park.
Cho, Young-Jin; Ji, Hong-Keun; Moon, Byung-Sun; Park, Ha-Sun; Goh, Jae-Mo; Park, Nam-Kyu; Choi, Don-Mook
2017-05-01
This study presented a Ferris wheel accident case. A Ferris wheel is composed of many parts, and the outmost ring of it is assembled using a lock pin. This accident occurred because the lock pin caught the door of a gondola and the gondola overturned. Five of the seven passengers in the gondola fell to the ground, along with the gondola's viewing window. The investigation revealed that the gondola became stuck when its door was caught by a lock pin at the Ferris wheel's three o'clock position. The contact between the door and the lock pin was due to a structural problem: There was not enough space allotted between the door and the lock pin. Therefore, if a passenger pushed on the gondola's door, the potential existed for contact between the door and the lock pin. © 2016 American Academy of Forensic Sciences.
Appearance (ethnic origin) of requester affects the foot-in-the-door technique.
Fointiat, Valerie; Saint-Bauzel, Roxane
2010-12-01
A study was designed to examine the effect of the appearance of the requester within one of the variants of the foot-in-the-door paradigm, that is, the foot-in-the-door with implicit demand described by Uranowitz in 1975. A confederate (Black vs. Blanc vs. Beur2) approached the participant in a park and presented a small request. Three steps further, the confederate "accidentally" dropped 30 sheets of paper. Whether or not the participant helped the confederate in retrieving the dropped pamphlets was recorded as the implicit dependent variable. The foot-in-the-door effect was observed solely when the requester was Blanc. This result shows that the foot-in-the-door effect is not as strong as the literature suggests and undermines the usual interpretations of the foot-in-the-door effect in terms of self-perception and commitment.
Detecting Signage and Doors for Blind Navigation and Wayfinding
Wang, Shuihua; Yang, Xiaodong; Tian, Yingli
2013-01-01
Signage plays a very important role to find destinations in applications of navigation and wayfinding. In this paper, we propose a novel framework to detect doors and signage to help blind people accessing unfamiliar indoor environments. In order to eliminate the interference information and improve the accuracy of signage detection, we first extract the attended areas by using a saliency map. Then the signage is detected in the attended areas by using a bipartite graph matching. The proposed method can handle multiple signage detection. Furthermore, in order to provide more information for blind users to access the area associated with the detected signage, we develop a robust method to detect doors based on a geometric door frame model which is independent to door appearances. Experimental results on our collected datasets of indoor signage and doors demonstrate the effectiveness and efficiency of our proposed method. PMID:23914345
Detecting Signage and Doors for Blind Navigation and Wayfinding.
Wang, Shuihua; Yang, Xiaodong; Tian, Yingli
2013-07-01
Signage plays a very important role to find destinations in applications of navigation and wayfinding. In this paper, we propose a novel framework to detect doors and signage to help blind people accessing unfamiliar indoor environments. In order to eliminate the interference information and improve the accuracy of signage detection, we first extract the attended areas by using a saliency map. Then the signage is detected in the attended areas by using a bipartite graph matching. The proposed method can handle multiple signage detection. Furthermore, in order to provide more information for blind users to access the area associated with the detected signage, we develop a robust method to detect doors based on a geometric door frame model which is independent to door appearances. Experimental results on our collected datasets of indoor signage and doors demonstrate the effectiveness and efficiency of our proposed method.
Migrating data from TcSE to DOORS : an evaluation of the T-Plan Integrator software application.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Post, Debra S.; Manzanares, David A.; Taylor, Jeffrey L.
2011-02-01
This report describes our evaluation of the T-Plan Integrator software application as it was used to transfer a real data set from the Teamcenter for Systems Engineering (TcSE) software application to the DOORS software application. The T-Plan Integrator was evaluated to determine if it would meet the needs of Sandia National Laboratories to migrate our existing data sets from TcSE to DOORS. This report presents the struggles of migrating data and focuses on how the Integrator can be used to map a data set and its data architecture from TcSE to DOORS. Finally, this report describes how the bulk ofmore » the migration can take place using the Integrator; however, about 20-30% of the data would need to be transferred from TcSE to DOORS manually. This report does not evaluate the transfer of data from DOORS to TcSE.« less
Development of Integrated Die Casting Process for Large Thin-Wall Magnesium Applications
DOE Office of Scientific and Technical Information (OSTI.GOV)
Carter, Jon T.; Wang, Gerry; Luo, Alan
The purpose of this project was to develop a process and product which would utilize magnesium die casting and result in energy savings when compared to the baseline steel product. The specific product chosen was a side door inner panel for a mid-size car. The scope of the project included: re-design of major structural parts of the door, design and build of the tooling required to make the parts, making of parts, assembly of doors, and testing (both physical and simulation) of doors. Additional work was done on alloy development, vacuum die casting, and overcasting, all in order to improvemore » the performance of the doors and reduce cost. The project achieved the following objectives: 1. Demonstrated ability to design a large thin-wall magnesium die casting. 2. Demonstrated ability to manufacture a large thin-wall magnesium die casting in AM60 alloy. 3. Tested via simulations and/or physical tests the mechanical behavior and corrosion behavior of magnesium die castings and/or lightweight experimental automotive side doors which incorporate a large, thin-wall, powder coated, magnesium die casting. Under some load cases, the results revealed cracking of the casting, which can be addressed with re-design and better material models for CAE analysis. No corrosion of the magnesium panel was observed. 4. Using life cycle analysis models, compared the energy consumption and global warming potential of the lightweight door with those of a conventional steel door, both during manufacture and in service. Compared to a steel door, the lightweight door requires more energy to manufacture but less energy during operation (i.e., fuel consumption when driving vehicle). Similarly, compared to a steel door, the lightweight door has higher global warming potential (GWP) during manufacture, but lower GWP during operation. 5. Compared the conventional magnesium die casting process with the “super-vacuum” die casting process. Results achieved with cast tensile bars suggest some improvement in tensile properties with vacuum casting. Plant trials with large castings revealed cavity fill issues attributed to cooling and partial solidification of metal in the shot sleeve while waiting for vacuum to be established in the die cavity. 6. Developed age-hardenable Mg-based alloys as potential alternatives to the AM60 and AZ91 alloys typically used in automotive applications. Mg-7%Al-based alloys having Sn or Sn+Si additions exhibited significant age hardening, but more work is needed to demonstrate significant improvement in tensile properties. Corrosion behavior of these alloys is between those of AM60 and AZ91 alloys. 7. Evaluated the die casting of magnesium directly onto either steel or aluminum tubes as a potential process to make large lightweight subassemblies. Samples were free of gross defects, but additional work is needed to increase the interfacial shear strength. Overall, the project demonstrated that an automotive door-in-white design incorporating a die cast magnesium inner panel and a stamped aluminum outer panel can achieve approximately 50% mass reduction compared to the stamped steel baseline door-in-white. This leads to reduced energy consumption when driving the vehicle, which should more than offset the increased embedded energy of manufacture associated with the lighter metals. However, additional design work would be needed in order to meet the mechanical performance required of a door. Development of high-strength, high-ductility magnesium alloy castings would help make this technology more attractive for potential use in the side doors on automobiles. Also, increased use of recycled magnesium and aluminum would reduce the embedded energy and greenhouse gas emissions associated with the manufacture of this type of lightweight door. Commercialization planning of the type of lightweight door technology addressed in this project would be contingent upon the doors meeting all technical performance requirements of the car maker. The specific lightweight door developed in this project didn’t meet some of those requirements, but a preliminary business case study was conducted anyhow. This study considered the ratio of cost increase to mass decrease when the lightweight door is compared to a baseline steel door. The ratio was found to be in an acceptable range for some vehicle programs, especially if the number of such vehicles to be produced is equal to or slightly less than the estimated 250,000-shot life of the die set. This would allow for the investment in the dies to be spread across many parts and thereby help minimize the cost increase.« less
2. DETAIL, EAST ENTRANCE, SHOWING OUTER BLAST DOOR AND INNER ...
2. DETAIL, EAST ENTRANCE, SHOWING OUTER BLAST DOOR AND INNER DOORS. - Edwards Air Force Base, Air Force Rocket Propulsion Laboratory, Instrumentation & Control Building, Test Area 1-115, northwest end of Saturn Boulevard, Boron, Kern County, CA
76 FR 7874 - Buy American Exceptions Under the American Recovery and Reinvestment Act of 2009
Federal Register 2010, 2011, 2012, 2013, 2014
2011-02-11
.../CATV combo communication wall plates, three-way switches, single pole switches, dryer outlets, door... switches, single pole switches, dryer outlets, door chimes and door viewers) are not produced in the U.S...
40 CFR 745.65 - Lead-based paint hazards.
Code of Federal Regulations, 2010 CFR
2010-07-01
... caused by impact from a related building component (such as a door knob that knocks into a wall or a door that knocks against its door frame. (3) Any chewable lead-based painted surface on which there is...
40 CFR 745.65 - Lead-based paint hazards.
Code of Federal Regulations, 2011 CFR
2011-07-01
... caused by impact from a related building component (such as a door knob that knocks into a wall or a door that knocks against its door frame. (3) Any chewable lead-based painted surface on which there is...
31. HALL INTERIOR SHOWING SINGLE FRENCH DOOR TO NORTH SIDE ...
31. HALL INTERIOR SHOWING SINGLE FRENCH DOOR TO NORTH SIDE SCREENED PORCH, AND TRAP-DOOR ACCESS TO ATTIC. VIEW TO NORTHEAST. - Big Creek Hydroelectric System, Powerhouse 8, Operator Cottage, Big Creek, Big Creek, Fresno County, CA
Driving and latching of the Starlab pointing mirror doors
NASA Technical Reports Server (NTRS)
Beaven, Herbert R., Jr.; Avina, Raymond R.
1990-01-01
The Starlab Experiment, a major SDIO technology initiative, is an attached payload which will be delivered into Earth orbit aboard NASA's Space Shuttle in 1991. Starlab will generate and aim an 80 cm diameter laser beam into space through a large opening in the structure which houses the pointing mirror. Two doors, each somewhat larger than a desktop, cover the opening when the laser optics system is nonoperational. Latch Mechanism Assemblies hold the doors shut during liftoff and ascent and, again, during Orbiter reentry. Each door is powered by a Door Drive System during the many open/close cycles between various experiments. The design, testing, and resultant failure modes of these mechanisms are examined.
SOFIA Closed- and Open-Door Aerodynamic Analyses
NASA Technical Reports Server (NTRS)
Cumming, Stephen; Frederick, Mike; Smith, Mark
2012-01-01
Work to evaluate the aerodynamic characteristics and the cavity acoustic environment of the SOFIA (Stratospheric Observatory for Infrared Astronomy) airplane has been completed. The airplane has been evaluated in its closed-door configuration, as well as several open-door configurations. Work performed included: acoustic analysis tool development, cavity acoustic evaluation, stability and control parameter estimation, air data calibration, and external flow evaluation. Qualitative airflow data were obtained during the closed- and open-door flights using tufts on the aft portion of the fuselage. Video was taken from a chase plane. This video was analyzed for various flight conditions, and general flow descriptions of the aft fuselage of the 747SP were developed for the different closed and open door configurations.
Maintenance Resources by Building Use for Installations in Germany
1991-11-01
125125. .01 0531140 STEEL ( INSULATED ) PAINTED INTERIOR DOOR 124956. .01 0432710 DOUBLE PANE STEEL FIXED WNDW. 1ST FLOOR 124922. .01 1131200 QUARTZ...FINISH 8507. .00 0535400 ALUMINUM DOUBLE ROLL-UP INTERIOR DOOR 8490. .00 0424310 ALUMINUM LOUVERED EXT DOORS 7973. .00 0421340 STEEL ( INSUL CORE) UNPUT...H.P. 0831130 20 1.09 Clay Block (Painted) Interior 0612200 21 1.08 Wall Sink. Stainless Steel 0811F00 22 1.03 Steel (Painted) Exterior Door 0421210 23
Environmental Assessment of Proposed Upgrades to Military Family Housing, Phase I
2003-03-01
contributions to the economic, ecological , recreational, and human health of a community or locale. Stormwater flows, which are increased by high proportions...positive at least once include the following: • Metal beams or columns (87 percent positive results) • Wood beams or columns (24 percent) • Wood ...cabinet doors (4 percent) • Wood ceiling (ə percent) • Varnished wood closet door (ə percent) • Wood door frames (ə percent) • Interior metal door
ERIC Educational Resources Information Center
McGuire, J. D.
2017-01-01
The process of entering prison as a civilian is such … sign in … send stuff through x-ray … walk through metal detector … get patted down by officer … show badge, get buzzed through steel door … get buzzed through another steel door … get buzzed through another steel door … show badge to officer, get buzzed through steel door. Enter the yard and…
17. VIEW OF AIR LOCK ENTRY DOOR. BANKS OF AIR ...
17. VIEW OF AIR LOCK ENTRY DOOR. BANKS OF AIR FILTERS ARE VISIBLE TO THE SIDES OF THE DOORS. THE BUILDING WAS DIVIDED INTO ZONES BY AIRLOCK DOORS AND AIR FILTERS. AIR PRESSURE DIFFERENTIALS WERE MAINTAINED IN THE ZONES, SUCH THAT AIRFLOW WAS PROGRESSIVELY TOWARD AREAS WITH THE HIGHEST POTENTIAL FOR CONTAMINATION. (9/24/91) - Rocky Flats Plant, Plutonium Manufacturing Facility, North-central section of Plant, just south of Building 776/777, Golden, Jefferson County, CO
Device for reducing vehicle aerodynamic resistance
Graham, Sean C.
2005-02-15
A device for a vehicle with a pair of swinging rear doors, which converts flat sheets of pliable material hinged to the sides of the vehicle adjacent the rear thereof into effective curved airfoils that reduce the aerodynamic resistance of the vehicle, when the doors are closed by hand, utilizing a plurality of stiffeners disposed generally parallel to the doors and affixed to the sheets and a plurality of collapsible tension bearings struts attached to each stiffener and the adjacent door.
3. EXTERIOR OF SOUTH SIDE SHOWING DOOR TO ENCLOSED FRONT ...
3. EXTERIOR OF SOUTH SIDE SHOWING DOOR TO ENCLOSED FRONT PORCH ON PHOTO RIGHT AND DOOR TO KITCHEN AT PHOTO LEFT. VIEW TO NORTH. - Bishop Creek Hydroelectric System, Control Station, Worker Cottage, Bishop Creek, Bishop, Inyo County, CA
The Ins and Outs of Modern Doors.
ERIC Educational Resources Information Center
College Planning & Management, 1999
1999-01-01
Discusses the qualities and trends in modern metal doors for educational facilities that include fire protection and sound-control attributes. Important differences in door manufacturing methods and materials are addressed and sound-transmission class values, ratings, and rating descriptions are listed. (GR)
2006-09-25
Ames and Moffett Field (MFA) historical sites and memorials Entry of building N-210 Ames Flight System Research Laboratory architectural detail. Eastside showing NACA brass inset wing over front doors, light fixtures flanking the doors and glass brick window wall above the doors
2006-09-25
Ames and Moffett Field (MFA) historical sites and memorials Entry of building N-210 Ames Flight System Research Laboratory architectural detail. Eastside showing NACA brass inset wing over front doors, light fixtures flanking the doors and glass brick window wall above the doors
DOOR AT LEFT IS IN ORIGINAL BRICKWORK OPENING. AT CENTER ...
DOOR AT LEFT IS IN ORIGINAL BRICKWORK OPENING. AT CENTER IS REMAINS OF STONE BASE COURSE AND CELLAR DOOR CHEEK TRACE. AT RIGHT IS WINDOW IN ORIGINAL BRICKWORK OPENING - Kid-Chandler House, 323 Walnut Street, Philadelphia, Philadelphia County, PA
Detail view from the east of the west door in ...
Detail view from the east of the west door in the Grand Banqueting Hall. Note scale laid against the right pilaster and plaster turkey ornament in the door pediment. - Masonic Temple, 1 North Broad Street, Philadelphia, Philadelphia County, PA
27. BEDROOM #2 INTERIOR SHOWING DOUBLE FRENCH DOORS TO SCREENED ...
27. BEDROOM #2 INTERIOR SHOWING DOUBLE FRENCH DOORS TO SCREENED PORCH AND UNUSUAL WINDOWED CLOSET THROUGH OPEN FIVE-PANELED DOOR. VIEW TO WEST. - Big Creek Hydroelectric System, Powerhouse 8, Operator Cottage, Big Creek, Big Creek, Fresno County, CA
16. DINING ROOM INTERIOR SHOWING DOUBLE DOOR ARCHWAY INTO LIVING ...
16. DINING ROOM INTERIOR SHOWING DOUBLE DOOR ARCHWAY INTO LIVING ROOM AND DOUBLE FRENCH DOORS INTO SOUTH END SCREENED PORCH. VIEW TO SOUTHWEST. - Big Creek Hydroelectric System, Powerhouse 8, Operator Cottage, Big Creek, Big Creek, Fresno County, CA
Air curtain development: an energy harvesting solution for hinged doors
NASA Astrophysics Data System (ADS)
Dayal, Vineed; Lee, Soobum
2017-04-01
The paper proposes a fully mechanical air curtain system that will be powered solely by harvested energy from common hinged doors. The average person uses this type of door several times a day with an almost unconscious amount of applied force and effort. This leads to a high potential of energy to be harvested in doorways that see high traffic and frequent operation7 . Frequently opened door entry ways have always been regarded as a major element that causes significant energy loss and contaminated air conditions in buildings6 . Private companies, particularly those with warehouses, have introduced commercial electrical air curtains to block the open entrances from invading cold air11. This project intends to introduce an original design of air curtain which operates fans only when the door opens and closes, by directly converting door motion to fan rotation without any electronic motor or power cable. The air stream created by this device will prevent the transfer of outside air and contaminants. Research will be conducted to determine the most efficient method of harvesting energy from door use, and the prototyping process will be conducted to meet the required performance of current air curtain models.
Ortiz, Genaro G; Arias-Merino, Elva D; Flores-Saiffe, María E; Velázquez-Brizuela, Irma E; Macías-Islas, Miguel A; Pacheco-Moisés, Fermín P
2012-01-01
Background. Cognitive impairment is an important clinical issue among elderly patients with depression and has a more complex etiology because of the variable rate of neurodegenerative changes associated with depression. The aim of the present work was to examine the prevalence of cognitive impairment and depression in a representative sample of adults aged ≥60 years. Methods. The presented work was a cross-sectional study on the prevalence of cognitive impairment and depression. Door-to-door interview technique was assigned in condition with multistage probability random sampling to obtain subjects that represent a population of the Guadalajara metropolitan area (GMA), Mexico. Cognitive function and depression were assessed by applying standardized Mini-Mental State Examination of Folstein (MMSE) and the Geriatric Depression Scale (GDS), respectively. Results. Prevalence of cognitive impairment was 13.8% (14.5% women, 12.6% men); no significant differences by gender and retired or pensioner were found. Prevalence of depression was 29.1% (33.6% women, 21.1% men); no significant differences by retired or pensioner were found. Cognitive impairment was associated with depression (OR = 3.26, CI 95%, 2.31-4.60). Prevalence of cognitive impairment and depression is associated with: being woman, only in depression being older than 75 years being married, and a low level of education. Conclusion. Cognitive impairment and depression are highly correlated in adults aged ≥60.
Ortiz, Genaro G.; Arias-Merino, Elva D.; Flores-Saiffe, María E.; Velázquez-Brizuela, Irma E.; Macías-Islas, Miguel A.; Pacheco-Moisés, Fermín P.
2012-01-01
Background. Cognitive impairment is an important clinical issue among elderly patients with depression and has a more complex etiology because of the variable rate of neurodegenerative changes associated with depression. The aim of the present work was to examine the prevalence of cognitive impairment and depression in a representative sample of adults aged ≥60 years. Methods. The presented work was a cross-sectional study on the prevalence of cognitive impairment and depression. Door-to-door interview technique was assigned in condition with multistage probability random sampling to obtain subjects that represent a population of the Guadalajara metropolitan area (GMA), Mexico. Cognitive function and depression were assessed by applying standardized Mini-Mental State Examination of Folstein (MMSE) and the Geriatric Depression Scale (GDS), respectively. Results. Prevalence of cognitive impairment was 13.8% (14.5% women, 12.6% men); no significant differences by gender and retired or pensioner were found. Prevalence of depression was 29.1% (33.6% women, 21.1% men); no significant differences by retired or pensioner were found. Cognitive impairment was associated with depression (OR = 3.26, CI 95%, 2.31–4.60). Prevalence of cognitive impairment and depression is associated with: being woman, only in depression being older than 75 years being married, and a low level of education. Conclusion. Cognitive impairment and depression are highly correlated in adults aged ≥60. PMID:23243421
DETAIL OF ORIGINAL SLIDING DOORS ALTERED WITH OPENING FOR HINGED ...
DETAIL OF ORIGINAL SLIDING DOORS ALTERED WITH OPENING FOR HINGED DOOR. WITH GRADUATED SCALE IN 1' INCREMENTS. VIEW FACING NORTHWEST - U.S. Naval Base, Pearl Harbor, Gymnasium Building, North Waterfront & Pierce Street near Berth S-13, Pearl City, Honolulu County, HI
Stair and entry room, bunkhouse, first floor interior. Door from ...
Stair and entry room, bunkhouse, first floor interior. Door from entry hall leads to toilets and bathing rooms. A coat and hat rack is on each side of the door. - Sespe Ranch, Bunkhouse, 2896 Telegraph Road, Fillmore, Ventura County, CA
8. INTERIOR OF FRONT SCREENEDIN PORCH SHOWING PORCH ENTRY DOOR ...
8. INTERIOR OF FRONT SCREENED-IN PORCH SHOWING PORCH ENTRY DOOR AT PHOTO CENTER AND FRONT ENTRY DOOR TO LIVING ROOM AT PHOTO LEFT. VIEW TO NORTHWEST. - Bishop Creek Hydroelectric System, Plant 4, Worker Cottage, Bishop Creek, Bishop, Inyo County, CA
22. DOOR CONTROL BOX AT STATION 70.5 OF MST FOR ...
22. DOOR CONTROL BOX AT STATION 70.5 OF MST FOR CONTROL OF SOUTH DOORS. NITROGEN PRESSURE REGULATOR ON LEFT. - Vandenberg Air Force Base, Space Launch Complex 3, Launch Pad 3 East, Napa & Alden Roads, Lompoc, Santa Barbara County, CA
28. INTERIOR OF KITCHEN SHOWING OPEN PANEL DOOR TO PANTRY ...
28. INTERIOR OF KITCHEN SHOWING OPEN PANEL DOOR TO PANTRY AT PHOTO RIGHT AND OPEN DOOR TO ORIGINAL SIDE-ENTRY UTILITY ROOM AT PHOTO LEFT. VIEW TO SOUTHWEST. - Rush Creek Hydroelectric System, Clubhouse Cottage, Rush Creek, June Lake, Mono County, CA
24. BEDROOM #1 INTERIOR SHOWING OPEN DOOR TO HALL WITH ...
24. BEDROOM #1 INTERIOR SHOWING OPEN DOOR TO HALL WITH HALL LINEN CLOSETS VISIBLE IN BACKGROUND, AND PARTIALLY OPEN DOOR TO CLOSET. VIEW TO EAST. - Big Creek Hydroelectric System, Powerhouse 8, Operator Cottage, Big Creek, Big Creek, Fresno County, CA
11. INTERIOR OF BEDROOM NUMBER ONE SHOWING OPEN PANEL DOOR ...
11. INTERIOR OF BEDROOM NUMBER ONE SHOWING OPEN PANEL DOOR TO LIVING ROOM AT PHOTO RIGHT AND OPEN DOOR TO BATHROOM AT PHOTO LEFT. VIEW TO SOUTHEAST. - Rush Creek Hydroelectric System, Worker Cottage, Rush Creek, June Lake, Mono County, CA
46 CFR 111.97-7 - Distribution.
Code of Federal Regulations, 2012 CFR
2012-10-01
... REQUIREMENTS Electric Power-Operated Watertight Door Systems § 111.97-7 Distribution. (a) Each distribution... locking. (b) Each feeder supplying a watertight door operating system must be above the uppermost continuous deck. (c) Each watertight door operating system must have a separate branch circuit. ...
46 CFR 111.97-7 - Distribution.
Code of Federal Regulations, 2011 CFR
2011-10-01
... REQUIREMENTS Electric Power-Operated Watertight Door Systems § 111.97-7 Distribution. (a) Each distribution... locking. (b) Each feeder supplying a watertight door operating system must be above the uppermost continuous deck. (c) Each watertight door operating system must have a separate branch circuit. ...
46 CFR 111.97-7 - Distribution.
Code of Federal Regulations, 2010 CFR
2010-10-01
... REQUIREMENTS Electric Power-Operated Watertight Door Systems § 111.97-7 Distribution. (a) Each distribution... locking. (b) Each feeder supplying a watertight door operating system must be above the uppermost continuous deck. (c) Each watertight door operating system must have a separate branch circuit. ...
46 CFR 111.97-7 - Distribution.
Code of Federal Regulations, 2014 CFR
2014-10-01
... REQUIREMENTS Electric Power-Operated Watertight Door Systems § 111.97-7 Distribution. (a) Each distribution... locking. (b) Each feeder supplying a watertight door operating system must be above the uppermost continuous deck. (c) Each watertight door operating system must have a separate branch circuit. ...
46 CFR 111.97-7 - Distribution.
Code of Federal Regulations, 2013 CFR
2013-10-01
... REQUIREMENTS Electric Power-Operated Watertight Door Systems § 111.97-7 Distribution. (a) Each distribution... locking. (b) Each feeder supplying a watertight door operating system must be above the uppermost continuous deck. (c) Each watertight door operating system must have a separate branch circuit. ...
Oblique view of radio room from outside door, looking southeast. ...
Oblique view of radio room from outside door, looking southeast. Note main electronics rack (left), battery room (through door), and overhead cable ducts. - Western Union Telegraph Company, Jennerstown Relay, Laurel Summit Road off U.S. 30, Laughlintown, Westmoreland County, PA
67. The "new" cellar had a communicating door with the ...
67. The "new" cellar had a communicating door with the parlor cellar to the west. These fragments are what remains of the door between the two spaces. - John Bartram House & Garden, House, 54th Street & Lindbergh Boulevard, Philadelphia, Philadelphia County, PA
6. DETAIL OF FLATARCHED WOODEN DOORS USED FOR ANIMAL ENTRY ...
6. DETAIL OF FLAT-ARCHED WOODEN DOORS USED FOR ANIMAL ENTRY AT CENTER OF SOUTHWEST FACADE. DOORS ARE COMPRISED OF THREE WOOD PANELS WITH A KICKPLATE ON SIDES. SMALL, SIX LITE WINDOWS COVERED BY GRILLS AND DETAILED WITH A THICK MASONRY LEDGE ARE LOCATED UNDER THE EAVE ON EITHER SIDE OF DOOR. A DRAINPIPE WITH A CONCRETE SPLASH BLOCK IS A LATER ADDITION. - Presidio of San Francisco, Cavalry Stables, Cowles Street, between Lincoln Boulevard & McDowell Street, San Francisco, San Francisco County, CA
NASA Astrophysics Data System (ADS)
Youn, Younghan; Koo, Jeong-Seo
The complete evaluation of the side vehicle structure and the occupant protection is only possible by means of the full scale side impact crash test. But, auto part manufacturers such as door trim makers can not conduct the test especially when the vehicle is under the developing process. The main objective of this study is to obtain the design guidelines by a simple component level impact test. The relationship between the target absorption energy and impactor speed were examined using the energy absorbed by the door trim. Since each different vehicle type required different energy levels on the door trim. A simple impact test method was developed to estimate abdominal injury by measuring reaction force of the impactor. The reaction force will be converted to a certain level of the energy by the proposed formula. The target of absorption energy for door trim only and the impact speed of simple impactor are derived theoretically based on the conservation of energy. With calculated speed of dummy and the effective mass of abdomen, the energy allocated in the abdomen area of door trim was calculated. The impactor speed can be calculated based on the equivalent energy of door trim absorbed during the full crash test. With the proposed design procedure for the door trim by a simple impact test method was demonstrated to evaluate the abdominal injury. This paper describes a study that was conducted to determine sensitivity of several design factors for reducing abdominal injury values using the matrix of orthogonal array method. In conclusion, with theoretical considerations and empirical test data, the main objective, standardization of door trim design using the simple impact test method was established.
NASA Astrophysics Data System (ADS)
Ishida, Shigeki; Mori, Atsuo; Shinji, Masato
The main method to reduce the blasting charge noise which occurs in a tunnel under construction is to install the sound insulation door in the tunnel. However, the numerical analysis technique to predict the accurate effect of the transmission loss in the sound insulation door is not established. In this study, we measured the blasting charge noise and the vibration of the sound insulation door in the tunnel with the blasting charge, and performed analysis and modified acoustic feature. In addition, we reproduced the noise reduction effect of the sound insulation door by statistical energy analysis method and confirmed that numerical simulation is possible by this procedure.
Factors affecting the energy consumption of two refrigerator-freezers
DOE Office of Scientific and Technical Information (OSTI.GOV)
Kao, J.Y.; Kelley, G.E.
Two refrigerator-freezers, one with a top-mounted freezer and one with side-by-side doors, were tested in the laboratory to determine the sensitivity of their energy consumption to various operational factors. Room temperature, room humidity, door openings, and the setting of the anti-sweat heater switch were the factors examined. The results indicated that the room temperature and door openings had a significantly greater effect on energy consumption than the other two factors. More detailed tests were then performed under different room temperature and door-opening combinations. The relationship of door openings and the equivalent test room temperature was established. Finally, the effect onmore » energy of different temperature settings was studied. Test results are presented and discussed.« less
An anticipative escape system for vehicles in water crashes
NASA Astrophysics Data System (ADS)
Shen, Chuanliang; Wang, Jiawei; Yin, Qi; Zhu, Yantao; Yang, Jiawei; Liao, Mengdi; Yang, Liming
2017-07-01
In this article, it designs an escape system for vehicles in water crashes. The structure mainly contains sensors, control organs and actuating mechanism for both doors and windows. Sensors judge whether the vehicle falls into water or is in the falling process. The actuating mechanism accepts the signal delivered by the control organs, then open the electronic central lock on doors and meanwhile lower the window. The water escape system is able to anticipate drowning situations for vehicles and controls both doors and windows in such an emergency. Under the premise of doors staying in an undamaged state, it is for sure that people in the vehicle can open the door while drowning in the water and safely escape.
4. AFRD WAREHOUSE, WEST SIDE DETAIL OF ALTERED SLIDING DOORS, ...
4. AFRD WAREHOUSE, WEST SIDE DETAIL OF ALTERED SLIDING DOORS, FACING EAST. WEATHER COVER OVER RAIL IS ORIGINAL. SHEET METAL SIDING HAS BEEN INSERTED BETWEEN TWO HALVES OF SLIDING DOORS. - Minidoka Relocation Center Warehouse, 111 South Fir Street, Shoshone, Lincoln County, ID
7. INTERIOR OF VESTIBULE SHOWING OPEN 1LIGHT FRONT DOOR AT ...
7. INTERIOR OF VESTIBULE SHOWING OPEN 1-LIGHT FRONT DOOR AT PHOTO RIGHT, AND OPEN PANEL DOOR TO BEDROOM ADDITION (BEDROOM NUMBER TWO) AT PHOTO CENTER. VIEW TO WEST. - Rush Creek Hydroelectric System, Worker Cottage, Rush Creek, June Lake, Mono County, CA
12. INTERIOR OF HALL SHOWING OPEN PANEL DOOR TO BEDROOM ...
12. INTERIOR OF HALL SHOWING OPEN PANEL DOOR TO BEDROOM NUMBER TWO AT PHOTO CENTER, AND OPEN PANEL DOOR TO BEDROOM NUMBER ONE AT RIGHT PHOTO CENTER. VIEW TO NORTHWEST. - Rush Creek Hydroelectric System, Clubhouse Cottage, Rush Creek, June Lake, Mono County, CA
33 CFR 100.905 - Door County Triathlon; Door County, WI.
Code of Federal Regulations, 2010 CFR
2010-07-01
... in position 45°00′46″ N, 087°20′30″ W. (DATUM: NAD 83). (b) Special Local Regulations. The...; Door County, WI. (a) Regulated Area. A regulated area is established to include all waters of Green Bay...
Door openings in the operating room are associated with increased environmental contamination.
Perez, Priscilla; Holloway, Julia; Ehrenfeld, Lucy; Cohen, Susan; Cunningham, Linda; Miley, Gerald B; Hollenbeck, Brian L
2018-05-04
Door openings in the operating room (OR) have been hypothesized to increase OR environmental contamination. This study measured average colony-forming units (CFU) in the OR as a function of door openings and other potentially important variables. Bacterial settle plates were placed inside and outside of laminar airflow (LAF) by both exit doors, on the instrument table, and on the back instrument table (if applicable) for 48 orthopedic and general surgery procedures. CFU data were paired to Staphylococcus aureus colonization status, door openings, surgery duration, time of day, OR location, number of staff, use of warming devices, temperature, and humidity. The number of door openings in the OR and surgery duration were significantly associated with increased CFU in the OR overall and outside of LAF. However, under LAF conditions, only the number of OR personnel was significantly associated with increased CFU. Copyright © 2018 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Elsevier Inc. All rights reserved.
Understanding "revolving door" patients in general practice: a qualitative study.
Williamson, Andrea E; Mullen, Kenneth; Wilson, Philip
2014-02-13
'Revolving door' patients in general practice are repeatedly removed from general practitioners' (GP) lists. This paper reports a qualitative portion of the first mixed methods study of these marginalised patients. We conducted qualitative semi-structured interviews with six practitioner services staff and six GPs in Scotland, utilizing Charmazian grounded theory to characterise 'revolving door' patients and their impact from professionals' perspectives. 'Revolving door' patients were reported as having three necessary characteristics; they had unreasonable expectations, exhibited inappropriate behaviours and had unmet health needs. A range of boundary breaches were reported too when 'revolving door' patients interacted with NHS staff. We utilise the 'sensitising concepts' of legitimacy by drawing on literature about 'good and bad' patients and 'dirty work designations.' We relate these to the core work of general practice and explore the role that medical and moral schemas have in how health service professionals understand and work with 'revolving door' patients. We suggest this may have wider relevance for the problem doctor patient relationship literature.
Interior view, secondfloor corridor looking east. Note the door to ...
Interior view, second-floor corridor looking east. Note the door to Egyptian Hall in the center distance and the door to Gothic Hall on the eastern entresol (third floor) at the top of the stairs - Masonic Temple, 1 North Broad Street, Philadelphia, Philadelphia County, PA
Hangar no. 1 perspective view of south doors and west ...
Hangar no. 1 perspective view of south doors and west side doors. Seen from hangar apron. Note hydrogen building at left edge distance. Looking 44 NE. - Marine Corps Air Station Tustin, Northern Lighter Than Air Ship Hangar, Meffett Avenue & Maxfield Street, Tustin, Orange County, CA
Code of Federal Regulations, 2012 CFR
2012-10-01
... in a fire control boundary must meet the following requirements: (1) A door in an accommodation space... either side by one person; (3) With the exception of staterooms, a door in an accommodation space, stairway, stairtower, passageway, or control space must open in the direction of escape, where practicable...
Code of Federal Regulations, 2013 CFR
2013-10-01
... in a fire control boundary must meet the following requirements: (1) A door in an accommodation space... either side by one person; (3) With the exception of staterooms, a door in an accommodation space, stairway, stairtower, passageway, or control space must open in the direction of escape, where practicable...
Code of Federal Regulations, 2014 CFR
2014-10-01
... in a fire control boundary must meet the following requirements: (1) A door in an accommodation space... either side by one person; (3) With the exception of staterooms, a door in an accommodation space, stairway, stairtower, passageway, or control space must open in the direction of escape, where practicable...
11. INTERIOR OF LIVING ROOM SHOWING OPEN PANEL DOOR TO ...
11. INTERIOR OF LIVING ROOM SHOWING OPEN PANEL DOOR TO BEDROOM NUMBER THREE AT LEFT PHOTO CENTER, AND OPEN PANEL DOOR TO THE HALL AT RIGHT PHOTO CENTER. VIEW TO WEST. - Rush Creek Hydroelectric System, Clubhouse Cottage, Rush Creek, June Lake, Mono County, CA
8. INTERIOR OF LIVING ROOM SHOWING OPEN DOOR TO KITCHEN ...
8. INTERIOR OF LIVING ROOM SHOWING OPEN DOOR TO KITCHEN NEXT TO BRICKED HEATER ENCLAVE (PHOTO CENTER), AND OPEN DOOR TO BEDROOM NO. 2 AT PHOTO LEFT. VIEW TO WEST. - Bishop Creek Hydroelectric System, Control Station, Worker Cottage, Bishop Creek, Bishop, Inyo County, CA
18. INTERIOR OF KITCHEN SHOWING OPEN 6LIGHT DOOR TO SIDEENTRY ...
18. INTERIOR OF KITCHEN SHOWING OPEN 6-LIGHT DOOR TO SIDE-ENTRY UTILITY ROOM AT PHOTO LEFT, AND OPEN DOOR TO WALK-IN PANTRY AT PHOTO RIGHT. VIEW TO SOUTHWEST. - Rush Creek Hydroelectric System, Worker Cottage, Rush Creek, June Lake, Mono County, CA
31. INTERIOR OF ORIGINAL SIDEENTRY UTILITY ROOM FROM KITCHEN DOOR ...
31. INTERIOR OF ORIGINAL SIDE-ENTRY UTILITY ROOM FROM KITCHEN DOOR SHOWING OPEN BROOM CLOSET DOOR AT PHOTO RIGHT AND DOORWAY INTO STORM PORCH ADDITION AT PHOTO LEFT. VIEW TO SOUTHWEST. - Rush Creek Hydroelectric System, Clubhouse Cottage, Rush Creek, June Lake, Mono County, CA
7. EXTERIOR DETAIL OF FRONT DOOR ON CASHBAUGH PERIOD PORTION ...
7. EXTERIOR DETAIL OF FRONT DOOR ON CASHBAUGH PERIOD PORTION OF HOUSE SHOWING PEDIMENTED LINTEL. DOOR TO BEDROOM NO. 1 ON SAME WALL AT PHOTO RIGHT. VIEW TO NORTHEAST. - Bishop Creek Hydroelectric System, Plant 6, Cashbaugh-Kilpatrick House, Bishop Creek, Bishop, Inyo County, CA
8. INTERIOR OF LIVING ROOM SHOWING 6LIGHT FRONT ENTRY DOOR ...
8. INTERIOR OF LIVING ROOM SHOWING 6-LIGHT FRONT ENTRY DOOR AND TWO 6-LIGHT OVER 1-LIGHT SASH WINDOWS TO PHOTO RIGHT OF FRONT DOOR OVERLOOKING PORCH. VIEW TO NORTHEAST. - Rush Creek Hydroelectric System, Worker Cottage, Rush Creek, June Lake, Mono County, CA
Mangam, Keith; Fiekowsky, Elana; Bagayoko, Moussa; Norris, Laura; Belemvire, Allison; Longhany, Rebecca; Fornadel, Christen; George, Kristen
2016-01-01
ABSTRACT Components of mHealth are increasingly being added to development interventions worldwide. A particular case of interest is in Mali where the U.S. President’s Malaria Initiative (PMI) Africa Indoor Residual Spraying (AIRS) Project piloted a mobile mass-messaging service in Koulikoro District in August 2014 to determine whether voice and/or text messages received on cell phones could effectively replace door-to-door mobilization for an indoor residual spraying (IRS) campaign. To measure the pilot’s effectiveness, we evaluated structure preparedness (all household and food items removed) in 3 pilot intervention villages compared with 3 villages prepared for spray through door-to-door mobilization that was modified by incorporating town hall meetings and radio spots. Structure preparedness was significantly lower in households mobilized through the mobile-messaging approach compared with the door-to-door approach (49% vs. 75%, respectively; P = .03). Spray coverage of targeted households also was significantly lower among the mobile-messaging villages than the door-to-door mobilization villages (86% vs. 96%, respectively; P = .02). The mobile-messaging approach, at US$8.62 per structure prepared, was both more costly and less effective than the door-to-door approach at US$1.08 per structure prepared. While literacy and familiarity with technology were major obstacles, it also became clear that by removing the face-to-face interactions between mobilizers and household residents, individuals were not as trusting or understanding of the mobilization messages. These residents felt it was easier to ignore a text or voice message than to ignore a mobilizer who could provide reassurances and preparation support. In addition, men often received the mobile messages, as they typically owned the mobile phones, while women—who were more likely to be at home at the time of spray—usually interacted with the door-to-door mobilizers. Future attempts at using mHealth approaches for similar IRS mobilization efforts in Mali should be done in a way that combines mHealth tools with more common human-based interventions, rather than as a stand-alone approach, and should be designed with a gender lens in mind. The choice of software used for mass messaging should also be considered to find a local option that is both less expensive and perhaps more attuned to the local context than a U.S.-based software solution. PMID:27353616
Mangam, Keith; Fiekowsky, Elana; Bagayoko, Moussa; Norris, Laura; Belemvire, Allison; Longhany, Rebecca; Fornadel, Christen; George, Kristen
2016-06-20
Components of mHealth are increasingly being added to development interventions worldwide. A particular case of interest is in Mali where the U.S. President's Malaria Initiative (PMI) Africa Indoor Residual Spraying (AIRS) Project piloted a mobile mass-messaging service in Koulikoro District in August 2014 to determine whether voice and/or text messages received on cell phones could effectively replace door-to-door mobilization for an indoor residual spraying (IRS) campaign. To measure the pilot's effectiveness, we evaluated structure preparedness (all household and food items removed) in 3 pilot intervention villages compared with 3 villages prepared for spray through door-to-door mobilization that was modified by incorporating town hall meetings and radio spots. Structure preparedness was significantly lower in households mobilized through the mobile-messaging approach compared with the door-to-door approach (49% vs. 75%, respectively; P = .03). Spray coverage of targeted households also was significantly lower among the mobile-messaging villages than the door-to-door mobilization villages (86% vs. 96%, respectively; P = .02). The mobile-messaging approach, at US$8.62 per structure prepared, was both more costly and less effective than the door-to-door approach at US$1.08 per structure prepared. While literacy and familiarity with technology were major obstacles, it also became clear that by removing the face-to-face interactions between mobilizers and household residents, individuals were not as trusting or understanding of the mobilization messages. These residents felt it was easier to ignore a text or voice message than to ignore a mobilizer who could provide reassurances and preparation support. In addition, men often received the mobile messages, as they typically owned the mobile phones, while women-who were more likely to be at home at the time of spray-usually interacted with the door-to-door mobilizers. Future attempts at using mHealth approaches for similar IRS mobilization efforts in Mali should be done in a way that combines mHealth tools with more common human-based interventions, rather than as a stand-alone approach, and should be designed with a gender lens in mind. The choice of software used for mass messaging should also be considered to find a local option that is both less expensive and perhaps more attuned to the local context than a U.S.-based software solution. © Mangam et al.
SKATE: a docking program that decouples systematic sampling from scoring.
Feng, Jianwen A; Marshall, Garland R
2010-11-15
SKATE is a docking prototype that decouples systematic sampling from scoring. This novel approach removes any interdependence between sampling and scoring functions to achieve better sampling and, thus, improves docking accuracy. SKATE systematically samples a ligand's conformational, rotational and translational degrees of freedom, as constrained by a receptor pocket, to find sterically allowed poses. Efficient systematic sampling is achieved by pruning the combinatorial tree using aggregate assembly, discriminant analysis, adaptive sampling, radial sampling, and clustering. Because systematic sampling is decoupled from scoring, the poses generated by SKATE can be ranked by any published, or in-house, scoring function. To test the performance of SKATE, ligands from the Asetex/CDCC set, the Surflex set, and the Vertex set, a total of 266 complexes, were redocked to their respective receptors. The results show that SKATE was able to sample poses within 2 A RMSD of the native structure for 98, 95, and 98% of the cases in the Astex/CDCC, Surflex, and Vertex sets, respectively. Cross-docking accuracy of SKATE was also assessed by docking 10 ligands to thymidine kinase and 73 ligands to cyclin-dependent kinase. 2010 Wiley Periodicals, Inc.
Nadalin, Francesca; Carbone, Alessandra
2018-02-01
Large-scale computational docking will be increasingly used in future years to discriminate protein-protein interactions at the residue resolution. Complete cross-docking experiments make in silico reconstruction of protein-protein interaction networks a feasible goal. They ask for efficient and accurate screening of the millions structural conformations issued by the calculations. We propose CIPS (Combined Interface Propensity for decoy Scoring), a new pair potential combining interface composition with residue-residue contact preference. CIPS outperforms several other methods on screening docking solutions obtained either with all-atom or with coarse-grain rigid docking. Further testing on 28 CAPRI targets corroborates CIPS predictive power over existing methods. By combining CIPS with atomic potentials, discrimination of correct conformations in all-atom structures reaches optimal accuracy. The drastic reduction of candidate solutions produced by thousands of proteins docked against each other makes large-scale docking accessible to analysis. CIPS source code is freely available at http://www.lcqb.upmc.fr/CIPS. alessandra.carbone@lip6.fr. Supplementary data are available at Bioinformatics online. © The Author(s) 2017. Published by Oxford University Press.
Wioland, Liên
2013-10-01
Statistics from the French Employee National Health Insurance Fund indicate high accident levels in the transport sector. This study represents initial thinking on a new approach to transport sector prevention based on the assumption that a work situation could be improved by acting on another interconnected work situation. Ergonomic analysis of two connected work situations, involving the road haulage drivers and cross-docking platform employees, was performed to test this assumption. Our results show that drivers are exposed to a number of identified risks, but their multiple tasks raise the question of activity intensification. The conditions, under which the drivers will perform their work and take to the road, are partly determined by the quality and organisation of the platform with which they interact. We make a number of recommendations (e.g. changing handling equipment, re-appraising certain jobs) to improve platform organisation and employee working conditions with the aim of also improving driver conditions. These initial steps in this prevention approach appear promising, but more detailed investigation is required. Copyright © 2013 Elsevier Ltd. All rights reserved.
Marzaro, Giovanni; Ferrarese, Alessandro; Chilin, Adriana
2014-08-01
The selection of the most appropriate protein conformation is a crucial aspect in molecular docking experiments. In order to reduce the errors arising from the use of a single protein conformation, several authors suggest the use of several tridimensional structures for the target. However, the selection of the most appropriate protein conformations still remains a challenging goal. The protein 3D-structures selection is mainly performed based on pairwise root-mean-square-deviation (RMSD) values computation, followed by hierarchical clustering. Herein we report an alternative strategy, based on the computation of only two atom affinity map for each protein conformation, followed by multivariate analysis and hierarchical clustering. This methodology was applied on seven different kinases of pharmaceutical interest. The comparison with the classical RMSD-based strategy was based on cross-docking of co-crystallized ligands. In the case of epidermal growth factor receptor kinase, also the docking performance on 220 known ligands were evaluated, followed by 3D-QSAR studies. In all the cases, the herein proposed methodology outperformed the RMSD-based one.
12. VIEW OF (PRESUMED) OUTHOUSE SHED. DOOR HAS AN AIR ...
12. VIEW OF (PRESUMED) OUTHOUSE SHED. DOOR HAS AN AIR FORCE INSIGNIA EMBLEM AFFIXED, 'AIR FORCE WEAPONS LABORATORY.' OTHER SIGN ON DOOR SAYS, 'BSD LIASON OFFICE.' INEL PHOTO NUMBER 65-6173, TAKEN NOVEMBER 10, 1965. - Idaho National Engineering Laboratory, Advanced Reentry Vehicle Fusing System, Scoville, Butte County, ID
14. INTERIOR OF SOUTH BEDROOM SHOWING FOURPANEL DOORS TO KITCHEN ...
14. INTERIOR OF SOUTH BEDROOM SHOWING FOUR-PANEL DOORS TO KITCHEN AT PHOTO LEFT AND BATHROOM AT PHOTO RIGHT, AND BUILT-IN CLOSET BETWEEN THE DOORS ON NORTH WALL. VIEW TO NORTH. - Bishop Creek Hydroelectric System, Plant 4, Worker Cottage, Bishop Creek, Bishop, Inyo County, CA
16. INTERIOR OF NORTH BEDROOM SHOWING FOURPANEL DOORS TO LIVING ...
16. INTERIOR OF NORTH BEDROOM SHOWING FOUR-PANEL DOORS TO LIVING ROOM AT PHOTO RIGHT AND BATHROOM AT PHOTO LEFT, AND BUILT-IN CLOSET BETWEEN THE DOORS ON SOUTH WALL. VIEW TO SOUTH. - Bishop Creek Hydroelectric System, Plant 4, Worker Cottage, Bishop Creek, Bishop, Inyo County, CA
South west corner of Bunkhouse showing the door to the ...
South west corner of Bunkhouse showing the door to the basement, electric panels and the hinged door to the basement used for unloading items into the basement. A small ranch hand's house sits adjacent to the west. - Sespe Ranch, Bunkhouse, 2896 Telegraph Road, Fillmore, Ventura County, CA
29 CFR 1917.114 - Cargo doors.
Code of Federal Regulations, 2010 CFR
2010-07-01
... counterweights shall be guarded. (2) Lift trucks and cranes shall not be used to move mechanically operated doors.... (1) The door shall be connected to its lifting tackle with shackles or equally secure means. (2) Lifting bridles and tackles shall have a safety factor of five, based upon maximum anticipated static...
77 FR 6522 - Airworthiness Directives; The Boeing Company Airplanes
Federal Register 2010, 2011, 2012, 2013, 2014
2012-02-08
...Rulemaking Portal: Go to http://www.regulations.gov . Follow the instructions for submitting comments. Fax... hold the door closed for the design loads. Fractured and missing latch pin retention bolts, if not... cargo door, fuselage frames, internal and external skin of the fuselage, cargo door frames, mid-span...
77 FR 30228 - Airworthiness Directives; Airbus Airplanes
Federal Register 2010, 2011, 2012, 2013, 2014
2012-05-22
... fatigue cracking in the crossbeams at the junction of the actuator beam of the lower deck cargo door. This... junction of the actuator beam of the lower deck cargo door, which could result in failure to withstand... deck cargo door actuator beam. The investigation results indicate that these cracks initiated in the...
15. NORTH BEDROOM INTERIOR SHOWING OPEN DOOR TO WALKIN CLOSET ...
15. NORTH BEDROOM INTERIOR SHOWING OPEN DOOR TO WALKIN CLOSET AT PHOTO RIGHT, AND OPEN DOOR TO LIVING ROOM AT PHOTO LEFT. VIEW TO EAST. - Big Creek Hydroelectric System, Big Creek Town, Operator House, Orchard Avenue south of Huntington Lake Road, Big Creek, Fresno County, CA
46 CFR 111.97-5 - Electric and hydraulic power supply.
Code of Federal Regulations, 2013 CFR
2013-10-01
... ELECTRIC SYSTEMS-GENERAL REQUIREMENTS Electric Power-Operated Watertight Door Systems § 111.97-5 Electric and hydraulic power supply. (a) Each electric motor-driven door operating system must have the same.... (f) The source of power for each hydraulically operated watertight door system using an independent...
46 CFR 111.97-5 - Electric and hydraulic power supply.
Code of Federal Regulations, 2012 CFR
2012-10-01
... ELECTRIC SYSTEMS-GENERAL REQUIREMENTS Electric Power-Operated Watertight Door Systems § 111.97-5 Electric and hydraulic power supply. (a) Each electric motor-driven door operating system must have the same.... (f) The source of power for each hydraulically operated watertight door system using an independent...
46 CFR 111.97-5 - Electric and hydraulic power supply.
Code of Federal Regulations, 2010 CFR
2010-10-01
... ELECTRIC SYSTEMS-GENERAL REQUIREMENTS Electric Power-Operated Watertight Door Systems § 111.97-5 Electric and hydraulic power supply. (a) Each electric motor-driven door operating system must have the same.... (f) The source of power for each hydraulically operated watertight door system using an independent...
46 CFR 111.97-5 - Electric and hydraulic power supply.
Code of Federal Regulations, 2011 CFR
2011-10-01
... ELECTRIC SYSTEMS-GENERAL REQUIREMENTS Electric Power-Operated Watertight Door Systems § 111.97-5 Electric and hydraulic power supply. (a) Each electric motor-driven door operating system must have the same.... (f) The source of power for each hydraulically operated watertight door system using an independent...
46 CFR 111.97-5 - Electric and hydraulic power supply.
Code of Federal Regulations, 2014 CFR
2014-10-01
... ELECTRIC SYSTEMS-GENERAL REQUIREMENTS Electric Power-Operated Watertight Door Systems § 111.97-5 Electric and hydraulic power supply. (a) Each electric motor-driven door operating system must have the same.... (f) The source of power for each hydraulically operated watertight door system using an independent...
Code of Federal Regulations, 2011 CFR
2011-07-01
... impact surface that is cause by impact from a related building component (such as a door knob that knocks into a wall or a door that knocks against its door frame; and (iv) If there is any other deteriorated...
Code of Federal Regulations, 2010 CFR
2010-07-01
... impact surface that is cause by impact from a related building component (such as a door knob that knocks into a wall or a door that knocks against its door frame; and (iv) If there is any other deteriorated...
16 CFR 1211.11 - Requirements for photoelectric sensors.
Code of Federal Regulations, 2010 CFR
2010-01-01
....11 Section 1211.11 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY...) long. The obstruction is to be centered under the door perpendicular to the plane of the door when in... photoelectric sensor's beam from a position 45 degrees from the plane of the door when in the closed position...
A Foot Operated Timeout Room Door Latch.
ERIC Educational Resources Information Center
Foxx, R. M.; And Others
1982-01-01
This report describes the design and implementation of a foot operated timeout room door latch that permits staff members to maintain a misbehaving retarded individual in timeout without locking the door. Use of the latch also frees the staff member involved to record behavioral observations or reinforce appropriate behavior. (Author)
If I Could Be a Door: Unlocking Imagination and Creativity.
ERIC Educational Resources Information Center
Skophammer, Karen
2003-01-01
Presents an art project used with fifth- and sixth-grade students in which they designed a door using clay. Explains that the students used mood to create a door for a specific person. States that this project teaches students how to express mood through their artwork. (CMK)
13. Detail of vestibule, or main entrance, showing lamp and ...
13. Detail of vestibule, or main entrance, showing lamp and eastern set of doors. (Sept. 1991) The other sides of these doors are seen from the inside in WA-197-14. The 'ghosts' of ornamental wooden griffins can be seen above the doors. These griffins were stolen shortly after protective plywood doors were removed on Sept. 6, 1991 in preparation for the public auction on Sept. 10. At the time of the theft, the griffins had not yet been photographed. - Fox Theater, Seventh Avenue & Olive Way, Seattle, King County, WA
Development of the CLAES instrument aperture door system
NASA Technical Reports Server (NTRS)
Stubbs, D. M.
1990-01-01
The design, assembly, and test processes followed in developing a space-qualified aperture door system are described. A blackbody calibration source is mounted inside the door, requiring the assembly to open and close a minimum of 150 cycles for instrument recalibration. Within the door system are four separate mechanisms, three of which are redundant; a pyro launch latch, a hinge bearing assembly, and a pair of pivot mechanisms. Decoupling devices within the pivot mechanisms allow an active drive unit to automatically overdrive a failed drive unit. The door is also stowable for possible Shuttle retrieval and re-entry. Illustrations and photographs of the flight hardware help acquaint the reader with the design. The aim is to pass on lessons learned in all phases of developing this spaceflight mechanism.
NASA Technical Reports Server (NTRS)
Mennell, R.
1974-01-01
Space shuttle orbiter elevon effectiveness was measured with the 6 inch elevon/elevon and elevon/fuselage gaps and various configurations of wing/elevon upper hingeline gap sealing flapper doors. The elevon configuration parametric variations consisted of sealing the lower hingeline to prevent flow-through and testing a long chord flapper door, a short chord flapper door, no flapper door (elevon/wing gap upper hingeline completely open), and a completely sealed elevon at elevon deflections from +20 deg to -40 deg. Preliminary data analysis indicates loss of elevon effectiveness at deflections more negative than -20 deg, and little or no effect of flapper door configuration on elevon effectiveness. Flow visualization photographs taken at alpha = 15 deg for two flapper door configurations substantiated the force data results. Aerodynamic force and moment data were measured in the body axis by a 2.5 inch task type internal strain gage balance. The model was sting supported through the base region with a nominal angle of attack range of -10 deg less than or equal to alpha less than or equal to 24 deg at a model angle of sideslip of Beta equal to 0 deg.
An unexpected knock on Corrigan’s secret door
Woywodt, Alexander
2010-01-01
Corrigan’s secret door describes a metaphorical escape route for busy physicians. The term was derived from the successful and exceptionally busy professional life of Irish physician Dominic John Corrigan (1802–80). It is claimed that Corrigan’s outpatient clinic was so busy that he required a secret door in his consulting rooms to escape from the ever-growing queue of eager patients. The origins of this charming story are unknown, and the door may have never existed. However, at present, Corrigan’s secret door is often quoted when busy physicians have their own little ways in surviving a stressful professional life. Generations of British-trained doctors have grown up with Corrigan’s secret door, as it was featured in the introduction of the Oxford Handbook of Clinical Medicine. Accordingly, trainees as well as more senior doctors are often reminded that having a ‘secret door’ is vital in surviving in the medical profession. My own escape is through classical music and the violoncello, in particular. As the name implies, my own secret door is normally invisible to colleagues and patients. This little article is about a patient who found me out, and a reflection on the role of classical music and the cello in my professional life. PMID:25984078
Testing for altruism and social pressure in charitable giving.
DellaVigna, Stefano; List, John A; Malmendier, Ulrike
2012-01-01
Every year, 90% of Americans give money to charities. Is such generosity necessarily welfare enhancing for the giver? We present a theoretical framework that distinguishes two types of motivation: individuals like to give, for example, due to altruism or warm glow, and individuals would rather not give but dislike saying no, for example, due to social pressure. We design a door-to-door fund-raiser in which some households are informed about the exact time of solicitation with a flyer on their doorknobs. Thus, they can seek or avoid the fund-raiser. We find that the flyer reduces the share of households opening the door by 9% to 25% and, if the flyer allows checking a Do Not Disturb box, reduces giving by 28% to 42%. The latter decrease is concentrated among donations smaller than $10. These findings suggest that social pressure is an important determinant of door-to-door giving. Combining data from this and a complementary field experiment, we structurally estimate the model. The estimated social pressure cost of saying no to a solicitor is $3.80 for an in-state charity and $1.40 for an out-of-state charity. Our welfare calculations suggest that our door-to-door fund-raising campaigns on average lower the utility of the potential donors.
Cantu-Brito, Carlos; Majersik, Jennifer J; Sánchez, Brisa N; Ruano, Angel; Becerra-Mendoza, Daniela; Wing, Jeffrey J; Morgenstern, Lewis B
2011-03-01
Stroke incidence and prevalence estimates in developing countries should include stroke cases not presenting to hospital. We performed door-to-door stroke case ascertainment in Durango Municipality, Mexico, to estimate stroke incidence and prevalence and to determine the error made by only ascertaining hospital cases. Between September 2008 and March 2009, 1996 housing units were randomly sampled to screen for stroke in Durango Municipality residents 35 years of age and older. Field workers utilized a validated screening tool. Those screening positive were referred to a neurologist for history and examination and a head CT scan. Prevalence and cumulative incidence from the door-to-door surveillance were calculated and compared with previously reported hospitalization rates during the same defined time. Respondents included 2437 subjects from 1419 homes. The refusal rate was 3.8%. Twenty subjects had verified or probable stroke. The prevalence of probable or verified stroke was 7.7 per 1000 (95% CI, 4.3 per 1000-11.2 per 1000). Five patients had a stroke during the time of the hospital surveillance, yielding a cumulative incidence of 232.3 per 100 000 (95% CI, 27.8-436.9). Two of the 5 cases were captured by door-to-door surveillance but not by hospital surveillance. This study provides the first community-based stroke prevalence and incidence estimates in Mexico. The wide confidence intervals, despite the large number of surveyed housing units, suggest the need for more advanced sampling strategies for stroke surveillance in the developing world.
Cantu-Brito, Carlos; Majersik, Jennifer J; Sánchez, Brisa N; Ruano, Angel; Becerra-Mendoza, Daniela; Wing, Jeffrey J; Morgenstern, Lewis B
2011-01-01
Background and Purpose Stroke incidence and prevalence estimates in developing countries should include stroke cases not presenting to hospital. We performed door-to-door stroke case ascertainment in Durango Municipality, Mexico to estimate stroke incidence and prevalence, and to determine the error made by only ascertaining hospital cases. Methods Between September 2008 and March 2009, 1996 housing units were randomly sampled to screen for stroke in Durango Municipality residents ≥35 years of age. Field workers utilized a validated screening tool. Those screening positive were referred to a neurologist for history and examination and if confirmed, a head CT scan. Prevalence and cumulative incidence from the door-to-door surveillance were calculated and compared with previously reported hospitalization rates during the same defined time. Results Respondents included 2437 subjects from 1419 homes. The refusal rate was 3.8%. Twenty subjects had verified or probable stroke. The prevalence of probable or verified stroke was 7.7/1000 (95% CI: 4.3/1000, 11.2/1000). Five patients had a stroke during the time of the hospital surveillance, yielding a cumulative incidence of 232.3/100,000 (95% CI: 27.8, 436.9). Two of the 5 cases were captured by door-to-door surveillance but not by hospital surveillance. Conclusions This study provides the first community-based stroke prevalence and incidence estimates in Mexico. The wide confidence intervals, despite the large number of surveyed housing units, suggest the need for more advanced sampling strategies for stroke surveillance in the developing world. PMID:21212398
Teter, Jonathan; Guajardo, Isabella; Al-Rammah, Tamrah; Rosson, Gedge; Perl, Trish M; Manahan, Michele
2017-05-01
The role of the operating room (OR) environment has been thought to contribute to surgical site infection rates. The quality of OR air, disruption of airflow, and other factors may increase contamination risks. We measured air particulate counts (APCs) to determine if they increased in relation to traffic, door opening, and other common activities. During 1 week, we recorded APCs in 5-minute intervals and movement of health care workers. Trained observers recorded information about traffic, door openings, job title of the opener, and the reason for opening. At least 1 OR door was open during 47% of all readings. There were 13.4 door openings per hour during cases. Door opening rates ranged from 0.19-0.28 per minute. During this time, a total of 660 air measurements were obtained. The mean APCs were 9,238 particles (95% confidence interval [CI], 5,494- 12,982) at baseline and 14,292 particles (95% CI, 12,382-16,201) during surgery. Overall APCs increased 13% when either door was opened (P < .15). Larger particles that correlated to bacterial size were elevated significantly (P < .001) on door opening. We observed numerous instances of verbal communication and equipment movement. Improving efficiency of communication and equipment can aid in reduction of traffic. Further study is needed to examine links between microbiologic sampling, outcome data, and particulate matter to enable study of risk factors and effects of personnel movement. Copyright © 2017 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Elsevier Inc. All rights reserved.
ERIC Educational Resources Information Center
Smyth, Steve; Smyth, Jen
2016-01-01
Science Opens Doors is the creation of Clive Thompson of the Horners' Livery Company. The Science Opens Doors project philosophy is strongly based upon the King's College London ASPIRES project, which established that children like doing science in junior school (ages 7-11), but that by the age of 12-14 they are firmly against becoming scientists.…
Federal Register 2010, 2011, 2012, 2013, 2014
2012-09-04
...., a Subsidiary of Overhead Door Corporation Including On-Site Leased Workers From Remedy Intelligent..., including on-site leased workers from Remedy Intelligent Staffing, Corpus Christi, Texas. The workers are... Automatics, Inc., a subsidiary of Overhead Door Corporation, including on-site leased workers from Remedy...
46 CFR 131.893 - Watertight doors and watertight hatches.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 46 Shipping 4 2010-10-01 2010-10-01 false Watertight doors and watertight hatches. 131.893 Section... hatches. Each watertight door in a bulkhead that must be watertight in compliance with the requirements in part 174 of this chapter, and each watertight hatch, must be marked on both sides in letters at least...
46 CFR 131.893 - Watertight doors and watertight hatches.
Code of Federal Regulations, 2012 CFR
2012-10-01
... 46 Shipping 4 2012-10-01 2012-10-01 false Watertight doors and watertight hatches. 131.893 Section... hatches. Each watertight door in a bulkhead that must be watertight in compliance with the requirements in part 174 of this chapter, and each watertight hatch, must be marked on both sides in letters at least...
46 CFR 131.893 - Watertight doors and watertight hatches.
Code of Federal Regulations, 2011 CFR
2011-10-01
... 46 Shipping 4 2011-10-01 2011-10-01 false Watertight doors and watertight hatches. 131.893 Section... hatches. Each watertight door in a bulkhead that must be watertight in compliance with the requirements in part 174 of this chapter, and each watertight hatch, must be marked on both sides in letters at least...
29 CFR 1915.506 - Hazards of fixed extinguishing systems on board vessels and vessel sections.
Code of Federal Regulations, 2010 CFR
2010-07-01
... operational. (d) Doors and hatches. The employer must: (1) Take protective measures to ensure that all doors, hatches, scuttles, and other exit openings remain working and accessible for escape in the event the systems are activated; and (2) Ensure that all inward opening doors, hatches, scuttles, and other...
46 CFR 131.893 - Watertight doors and watertight hatches.
Code of Federal Regulations, 2013 CFR
2013-10-01
... 46 Shipping 4 2013-10-01 2013-10-01 false Watertight doors and watertight hatches. 131.893 Section... hatches. Each watertight door in a bulkhead that must be watertight in compliance with the requirements in part 174 of this chapter, and each watertight hatch, must be marked on both sides in letters at least...
46 CFR 131.893 - Watertight doors and watertight hatches.
Code of Federal Regulations, 2014 CFR
2014-10-01
... 46 Shipping 4 2014-10-01 2014-10-01 false Watertight doors and watertight hatches. 131.893 Section... hatches. Each watertight door in a bulkhead that must be watertight in compliance with the requirements in part 174 of this chapter, and each watertight hatch, must be marked on both sides in letters at least...
Opening Doors to Cultural Diversity
ERIC Educational Resources Information Center
Vidmar, Lou Ann
2007-01-01
The artwork created by David Hammons titled "The Door," is a glass in wood door that shows the words "Admissions Office" on it in reverse. There is a black shadow image of a person peering in. This powerful statement of inequality reflected the frustration of African-Americans trying to get into colleges and universities during…
24 CFR 3280.113 - Glass and glazed openings.
Code of Federal Regulations, 2011 CFR
2011-04-01
... 24 Housing and Urban Development 5 2011-04-01 2011-04-01 false Glass and glazed openings. 3280.113... Glass and glazed openings. (a) Windows and sliding glass doors. All windows and sliding glass doors shall meet the requirements of § 3280.403 the “Standard for Windows and Sliding Glass Doors Used in...
46 CFR 72.05-25 - Doors, other than watertight.
Code of Federal Regulations, 2013 CFR
2013-10-01
... bulkheads required to be Class A-0 shall be of solid or hollow steel or equivalent metal construction... top of approved deck covering. Rugs, and carpets, shall not pass through doorways, but linoleum and... 1/2 inch door stop at the sides and top, except: (i) Double doors capable of independent operation...
46 CFR 72.05-25 - Doors, other than watertight.
Code of Federal Regulations, 2014 CFR
2014-10-01
... bulkheads required to be Class A-0 shall be of solid or hollow steel or equivalent metal construction... top of approved deck covering. Rugs, and carpets, shall not pass through doorways, but linoleum and... 1/2 inch door stop at the sides and top, except: (i) Double doors capable of independent operation...
46 CFR 72.05-25 - Doors, other than watertight.
Code of Federal Regulations, 2012 CFR
2012-10-01
... bulkheads required to be Class A-0 shall be of solid or hollow steel or equivalent metal construction... top of approved deck covering. Rugs, and carpets, shall not pass through doorways, but linoleum and... 1/2 inch door stop at the sides and top, except: (i) Double doors capable of independent operation...
Code of Federal Regulations, 2010 CFR
2010-10-01
... tool or other implement. (c) The status of each powered, exterior side door in a passenger car shall be displayed to the crew in the operating cab. If door interlocks are used, the sensors used to detect train... car shall be connected to an emergency back-up power system. (e) A railroad may protect a manual...
Code of Federal Regulations, 2011 CFR
2011-10-01
... tool or other implement. (c) The status of each powered, exterior side door in a passenger car shall be displayed to the crew in the operating cab. If door interlocks are used, the sensors used to detect train... car shall be connected to an emergency back-up power system. (e) A railroad may protect a manual...
14 CFR Appendix - Special Federal Aviation Regulation No. 109
Code of Federal Regulations, 2011 CFR
2011-01-01
... absorbing protective padding (foam or equivalent) such as Ensolite. (6) Shoulder Strap Loads. Where upper... must have a means to signal to the flightcrew, at the flightdeck, that the door is in the open position... that any such door is in the open configuration for takeoff and landing. (c) Each door between any...
14 CFR Appendix - Special Federal Aviation Regulation No. 109
Code of Federal Regulations, 2012 CFR
2012-01-01
... absorbing protective padding (foam or equivalent) such as Ensolite. (6) Shoulder Strap Loads. Where upper... must have a means to signal to the flightcrew, at the flightdeck, that the door is in the open position... that any such door is in the open configuration for takeoff and landing. (c) Each door between any...
14 CFR Appendix - Special Federal Aviation Regulation No. 109
Code of Federal Regulations, 2013 CFR
2013-01-01
... absorbing protective padding (foam or equivalent) such as Ensolite. (6) Shoulder Strap Loads. Where upper... must have a means to signal to the flightcrew, at the flightdeck, that the door is in the open position... that any such door is in the open configuration for takeoff and landing. (c) Each door between any...
14 CFR Appendix - Special Federal Aviation Regulation No. 109
Code of Federal Regulations, 2014 CFR
2014-01-01
... absorbing protective padding (foam or equivalent) such as Ensolite. (6) Shoulder Strap Loads. Where upper... must have a means to signal to the flightcrew, at the flightdeck, that the door is in the open position... that any such door is in the open configuration for takeoff and landing. (c) Each door between any...
16 CFR 1201.40 - Interpretation concerning bathtub and shower doors and enclosures.
Code of Federal Regulations, 2011 CFR
2011-01-01
... 16 Commercial Practices 2 2011-01-01 2011-01-01 false Interpretation concerning bathtub and shower... Policy and Interpretation § 1201.40 Interpretation concerning bathtub and shower doors and enclosures. (a... and enclosures” and “shower door and enclosure” as they are used in the Standard in subpart A. The...
49 CFR 38.153 - Doors, steps and thresholds.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 49 Transportation 1 2010-10-01 2010-10-01 false Doors, steps and thresholds. 38.153 Section 38.153... SPECIFICATIONS FOR TRANSPORTATION VEHICLES Over-the-Road Buses and Systems § 38.153 Doors, steps and thresholds. (a) Floor surfaces on aisles, step treads and areas where wheelchair and mobility aid users are to be...
36 CFR 1192.153 - Doors, steps and thresholds.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false Doors, steps and thresholds... Over-the-Road Buses and Systems § 1192.153 Doors, steps and thresholds. (a) Floor surfaces on aisles, step treads and areas where wheelchair and mobility aid users are to be accommodated shall be slip...
13. INTERIOR OF BEDROOM NUMBER TWO SHOWING OPEN PANEL DOOR ...
13. INTERIOR OF BEDROOM NUMBER TWO SHOWING OPEN PANEL DOOR FROM BEDROOM NUMBER ONE AT PHOTO LEFT, AND OPEN DOORS TO THE TWO SEPARATE WALK-IN CLOSETS AT REAR OF ROOM AT PHOTO CENTER AND RIGHT. VIEW TO SOUTH. - Rush Creek Hydroelectric System, Worker Cottage, Rush Creek, June Lake, Mono County, CA
Doors to Discovery[TM]. What Works Clearinghouse Intervention Report
ERIC Educational Resources Information Center
What Works Clearinghouse, 2007
2007-01-01
"Doors to Discovery"[TM] is an early childhood curriculum that uses thematic units to engage young children and support them as they build an understanding of their world. "Doors to Discovery"[TM] literacy activities are used to encourage children's development in a number of areas identified by research as the foundation for…
Code of Federal Regulations, 2010 CFR
2010-04-01
... under the HUD building product standard and certification program for fenestration products (windows and... fenestration products (windows and doors). (a) Applicable standards. (1) All windows and doors shall be... Windows and Glass Doors. (2) This standard has been approved by the Director of the Federal Register for...
Through the Sliding Glass Door: #EmpowerTheReader
ERIC Educational Resources Information Center
Johnson, Nancy J.; Koss, Melanie D.; Martinez, Miriam
2018-01-01
This article seeks to complicate the understanding of Bishop's (1990) metaphor of mirrors, windows, and sliding glass doors, with particular emphasis on sliding glass doors and the emotional connections needed for readers to move through them. The authors begin by examining the importance of the reader and the characters he or she meets. Next, the…
46 CFR 190.10-20 - No means for locking doors.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 46 Shipping 7 2010-10-01 2010-10-01 false No means for locking doors. 190.10-20 Section 190.10-20 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OCEANOGRAPHIC RESEARCH VESSELS CONSTRUCTION AND ARRANGEMENT Means of Escape § 190.10-20 No means for locking doors. (a) No means shall be...
Students' Perspectives on Materials Posted on Faculty Office Doors
ERIC Educational Resources Information Center
Kelly, David B.
2008-01-01
Undergraduates (N = 459) completed a survey in which they rated the appropriateness of various materials that might be posted on the outside of faculty office doors. Results indicated that students considered school-related items to be the most appropriate for posting on faculty doors; items of personal expression were rated second most…
Revolving Classroom Door: Management Strategies To Eliminate the Quick Spin.
ERIC Educational Resources Information Center
Rancifer, Jesse L.
This paper presents classroom management practices that can be used to avoid the "revolving classroom door." In the revolving classroom door, misbehaving students are sent to the principal, and eventually returned to the classroom with no gains in student behavior or opportunity for learning. The paper begins by discussing the meaning of classroom…
21. INTERIOR OF UTILITY ROOM SHOWING OPEN REAR DOOR AT ...
21. INTERIOR OF UTILITY ROOM SHOWING OPEN REAR DOOR AT PHOTO CENTER, PAIRED NARROW 1-LIGHT OVER 1-LIGHT, DOUBLE-HUNG, WOOD-FRAMED WINDOWS AT PHOTO LEFT. OPEN DOOR AT PHOTO RIGHT LEADS TO BATHROOM. VIEW TO SOUTHWEST. - Bishop Creek Hydroelectric System, Plant 4, Worker Cottage, Bishop Creek, Bishop, Inyo County, CA
Kuroshima, Hika; Nabeoka, Yukari; Hori, Yusuke; Chijiiwa, Hitomi; Fujita, Kazuo
2017-03-01
Reasoning about physical properties of objects such as heaviness by observing others' actions toward them is important and useful for adapting to the environment. In this study, we asked whether domestic dogs (Canis familiaris) can use a human's action to infer a physical property of target objects. In Experiment 1, dogs watched an experimenter opening two differently loaded swinging doors with different corresponding degrees of effort, and then were allowed to open one of the doors. Dogs chose randomly between the two doors. In Experiment 2, we gave new dogs the same test as in Experiment 1, but only after giving them experience of opening the doors by themselves, so that they already knew that the doors could be either light or heavy. In this test the dogs reliably chose the light door. These results indicate that dogs are able to infer physical characteristics of objects from the latters' movement caused by human action, but that this inferential reasoning requires direct own experience of the objects. Copyright © 2017. Published by Elsevier B.V.
Door detection in images based on learning by components
NASA Astrophysics Data System (ADS)
Cicirelli, Grazia; D'Orazio, Tiziana; Ancona, Nicola
2001-10-01
In this paper we present a vision-based technique for detecting targets of the environment which has to be reached by an autonomous mobile robot during its navigational task. The targets the robot has to reach are the doors of our office building. Color and shape information are used as identifying features for detecting principal components of the door. In fact in images the door can appear of different dimensions depending on the attitude of the robot with respect to the door, therefore detection of the door is performed by detecting its most significant components in the image. Positive and negative examples, in form of image patterns, are manually selected from real images for training two neural classifiers in order to recognize the single components. Each classifier has been realized by a feed-forward neural network with one hidden layer and sigmoid activation function. Moreover for selecting negative examples, relevant for the problem at hand, a bootstrap technique has been used during the training process. Finally the detecting system has been applied to several test real images for evaluating its performance.
NASA Astrophysics Data System (ADS)
Ferro, Andrea R.; Klepeis, Neil E.; Ott, Wayne R.; Nazaroff, William W.; Hildemann, Lynn M.; Switzer, Paul
Residential interior door positions influence the pollutant concentrations that result from short-term indoor sources, such as cigarettes, candles, and incense. To elucidate this influence, we reviewed past studies and conducted new experiments in three residences: a single-story 714 m 3 ranch-style house, a 510 m 3 two-story split-level house, and a 200 m 3 two-story house. During the experiments, we released sulfur hexafluoride or carbon monoxide tracer gas over short periods (≤30 min) and measured concentrations in the source room and at least one other (receptor) room for various interior door opening positions. We found that closing a door between rooms effectively prevented transport of air pollutants, reducing the average concentration in the receptor room relative to the source room by 57-100% over exposure periods of 1-8 h. When intervening doors were partially or fully open, the reduction in average concentrations ranged from 3% to 99%, varying as a function of door opening width and the distance between source and receptor rooms.
7. View (looking west) of the second floor corridor in ...
7. View (looking west) of the second floor corridor in the south segment of building. The second floor was designed for residential rental rooms. The guardrail, balusters, newel posts, and handrail, as well as the two upper-level door openings with transoms, are original features. The doors, proper, are nonoriginal and probably were installed when the second floor was converted to office use. The pair of doors (one leaf is open and one is closed) is located at the intermediate stair landing. The original exterior doorway (without a door) is located at the bottom of the stair. The upper-level door without a transom is nonoriginal, as are the floor tile and wall paneling. At the time of documentation a suspended ceiling and duct were removed to ... - Stroud Building, 31-33 North Central Avenue, Phoenix, Maricopa County, AZ
Nersveen, Jonny
2016-01-01
Users of walkers and users of different categories of wheelchairs tested doors with different opening force, aiming to reveal the limit that these groups of people could manage on an everyday basis. 94.7% of the wheelchair users reported that a door opening force of 30 N was acceptable, while as 92.1% of this group described 40 N as acceptable. Similarly, 100% of the walker users reported that a door opening force of 30 N was acceptable, while as 87,5% of this group described 40 N as acceptable.
Hand sanitizer-dispensing door handles increase hand hygiene compliance: a pilot study.
Babiarz, Lukasz S; Savoie, Brent; McGuire, Mark; McConnell, Lauren; Nagy, Paul
2014-04-01
Improving rates of hand hygiene compliance (HHC) has been shown to reduce nosocomial disease. We compared the HHC for a traditional wall-mounted unit and a novel sanitizer-dispensing door handle device in a hospital inpatient ultrasound area. HHC increased 24.5%-77.1% (P < .001) for the exam room with the sanitizer-dispensing door handle, whereas it remained unchanged for the other rooms. Technical improvements like a sanitizer-dispensing door handle can improve hospital HHC. Copyright © 2014 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Mosby, Inc. All rights reserved.
Passive rejection of heat from an isotope heat source through an open door
NASA Technical Reports Server (NTRS)
Burns, R. K.
1971-01-01
The isotope heat-source design for a Brayton power system includes a door in the thermal insulation through which the heat can be passively rejected to space when the power system is not operating. The results of an analysis to predict the heat-source surface temperature and the heat-source heat-exchanger temperature during passive heat rejection as a function of insulation door opening angle are presented. They show that for a door opening angle greater than 20 deg, the temperatures are less than the steady-state temperatures during power system operation.
Kumar, Vinod; Yadav, Bhupendra
2017-08-08
To describe a novel intraoperative finding during pars plana vitrectomy for macular hole using operating microscope-integrated spectral domain optical coherence tomography that predicts the closure of macular hole. Twenty-five eyes of 25 patients with macular hole, who underwent 25-gauge pars plana vitrectomy over a period of 16 months at a tertiary eye care center by a single surgeon, were recruited in this retrospective interventional study. All eyes were assessed with intraoperative spectral domain optical coherence tomography before and after internal limiting membrane peeling. The patients were assessed in terms of best-corrected visual acuity, preoperative minimal hole diameter, and type of hole closure. After the internal limiting membrane was peeled, vertical pillars of tissue were seen at the edges of hole projecting into the vitreous cavity. This appearance was similar to that of an open door over the macular hole and was termed "hole-door sign." Hole-door sign was seen in 15 of 25 eyes (60%). All the eyes with hole-door sign had Type-1 closure of macular hole (100%), whereas only 6 of 10 eyes (60%) without hole-door sign had Type-1 closure of the macular hole. Hole-door sign is a novel intraoperative finding that predicts postoperative Type-1 closure of macular hole. This may add to the utility of intraoperative optical coherence tomography in clinical practice.
4. WEST FACADE, DOOR LEADING TO THE ELECTRICAL ROOM ON ...
4. WEST FACADE, DOOR LEADING TO THE ELECTRICAL ROOM ON RIGHT. THE DOOR TO THE LEFT IS THE WEST ENTRANCE TO THE CATWALK LOCATED OVER THE STORAGE TANKS. - Rocky Mountain Arsenal, Tank House, Quadrant 1, approximately 1000 feet South of December Seventh Avenue; 2200 feet East of D Street, Commerce City, Adams County, CO
ERIC Educational Resources Information Center
Wilmot, Mark; Naidoo, Devika
2011-01-01
Now that the doors of historically white schools have officially been opened to Black learners, this paper presents a critical analysis of discourses of domination transmitted behind the doors of learning in a History classroom. While the official History curriculum (NCS, 2002) advocates multi-perspectival epistemological approaches, this paper…
78 FR 31389 - Airworthiness Directives; The Boeing Company Airplanes
Federal Register 2010, 2011, 2012, 2013, 2014
2013-05-24
... requires repetitive inspections to detect cracking of the lower corners of the door frame and cross beam of... modification of the outboard radius of the lower corners of the door frame and reinforcement of the cross beam... of the lower frames and in the lower number 5 cross beam of the forward cargo door. We are issuing...
Keeping the Doors of Learning Open for Adult Student-Workers within Higher Education?
ERIC Educational Resources Information Center
Walters, Shirley; Abrahams, Mark; Witbooi, Sally
2015-01-01
The Freedom Charter of the African National Congress (ANC), the triumphant South African liberation movement, proclaims that "the doors of learning shall be open" for all. Twenty years since coming to power, the doors of the universities are struggling to stay open for adult student-workers. An action research project into implementation…
Wood Performance in Doorways of Single-Family Houses
Thomas W. Popham; Rodney C. DeGroot; Ronald W. Howe
1978-01-01
Front doors and door frames in 175 new houses with slab-on-ground foundations were examined for moisture and decay problems in three Mississippi counties that border the Gulf of Mexico during summer 1973. Defects were often the result of building techniques of particular developers. No special problem was detected that would cause frames or doors to have excessively...
6. ENTRANCE DETAIL AT TECHWOOD DORMITORY, SHOWING NORTH ENTRANCE FROM ...
6. ENTRANCE DETAIL AT TECHWOOD DORMITORY, SHOWING NORTH ENTRANCE FROM CENTRAL COURTYARD INTO CENTER WING. ORIGINAL DOUBLE DOORS HAVE BEEN REPLACED WITH A SINGLE, WIDER DOOR. STONE USED FOR DOOR SURROUND AND WINDOW LINTEL AND AS A DECORATIVE BAND BETWEEN SECOND AND THIRD FLOORS. - Techwood Homes, McDaniel Dormitory, 581-587 Techwood Drive, Atlanta, Fulton County, GA
77 FR 50407 - Airworthiness Directives; The Boeing Company Airplanes
Federal Register 2010, 2011, 2012, 2013, 2014
2012-08-21
... requires repetitive inspections to detect cracking of the lower corners of the door frame and cross beam of... modification of the outboard radius of the lower corners of the door frame and reinforcement of the cross beam... the lower frames and in the lower number 5 cross beam of the forward cargo door. This proposed AD...
49 CFR 571.214 - Standard No. 214; Side impact protection.
Code of Federal Regulations, 2010 CFR
2010-10-01
... of the cushion with the seat adjusted to its rearmost position. (4) Any side door that is designed to... exclusively have doors that are designed to be easily attached or removed so the vehicle can be operated... have doors that are designed to be easily attached or removed so that the vehicle can be operated...
49 CFR 571.214 - Standard No. 214; Side impact protection.
Code of Federal Regulations, 2013 CFR
2013-10-01
... of the cushion with the seat adjusted to its rearmost position. (4) Any side door that is designed to... exclusively have doors that are designed to be easily attached or removed so the vehicle can be operated... have doors that are designed to be easily attached or removed so that the vehicle can be operated...
49 CFR 571.214 - Standard No. 214; Side impact protection.
Code of Federal Regulations, 2012 CFR
2012-10-01
... of the cushion with the seat adjusted to its rearmost position. (4) Any side door that is designed to... exclusively have doors that are designed to be easily attached or removed so the vehicle can be operated... have doors that are designed to be easily attached or removed so that the vehicle can be operated...
49 CFR 571.214 - Standard No. 214; Side impact protection.
Code of Federal Regulations, 2014 CFR
2014-10-01
... of the cushion with the seat adjusted to its rearmost position. (4) Any side door that is designed to... exclusively have doors that are designed to be easily attached or removed so the vehicle can be operated... have doors that are designed to be easily attached or removed so that the vehicle can be operated...
36 CFR 1192.25 - Doors, steps and thresholds.
Code of Federal Regulations, 2011 CFR
2011-07-01
...) Contrast. All step edges, thresholds, and the boarding edge of ramps or lift platforms shall have a band of... lift or ramp surface, either light-on-dark or dark-on-light. (c) Door height. For vehicles in excess of 22 feet in length, the overhead clearance between the top of the door opening and the raised lift...
36 CFR 1192.25 - Doors, steps and thresholds.
Code of Federal Regulations, 2010 CFR
2010-07-01
...) Contrast. All step edges, thresholds, and the boarding edge of ramps or lift platforms shall have a band of... lift or ramp surface, either light-on-dark or dark-on-light. (c) Door height. For vehicles in excess of 22 feet in length, the overhead clearance between the top of the door opening and the raised lift...
11. LIVING ROOM INTERIOR SHOWING BUILTIN CUPBOARD AND OPEN DOOR ...
11. LIVING ROOM INTERIOR SHOWING BUILT-IN CUPBOARD AND OPEN DOOR TO KITCHEN ON THE NORTH WALL AT PHOTO CENTER. OPEN DOOR ON WEST WALL AT PHOTO LEFT ENTERS NORTH BEDROOM. VIEW TO NORTH. - Big Creek Hydroelectric System, Big Creek Town, Operator House, Orchard Avenue south of Huntington Lake Road, Big Creek, Fresno County, CA
Shapiro, Carolyn
1993-01-01
A high speed door assembly, comprising an actuator cylinder and piston rods, a pressure supply cylinder and fittings, an electrically detonated explosive bolt, a honeycomb structured door, a honeycomb structured decelerator, and a structural steel frame encasing the assembly to close over a 3 foot diameter opening within 50 milliseconds of actuation, to contain hazardous materials and vapors within a test fixture.
78 FR 57786 - Airworthiness Directives; AgustaWestland S.p.A. Helicopters
Federal Register 2010, 2011, 2012, 2013, 2014
2013-09-20
... to ensure that the windows are properly bonded within the doors. If the windows are not properly bonded, the AD requires applying bonding to the windows, the seals, and the window frames of the pilot and co-pilot doors. This AD was prompted by the loss of a pilot-door window during a test flight. The...
78 FR 24367 - Airworthiness Directives; AgustaWestland S.p.A. Helicopters
Federal Register 2010, 2011, 2012, 2013, 2014
2013-04-25
... to ensure that the windows are properly bonded within the doors. If the windows are not properly bonded, the proposed AD would require applying bonding to the windows, the seals, and the window frames of the pilot and co-pilot doors. This proposed AD is prompted by the loss of a pilot-door window...
9. VIEW TO SOUTH SHOWING ENTRANCES TO BUILDING AT NORTHEAST ...
9. VIEW TO SOUTH SHOWING ENTRANCES TO BUILDING AT NORTHEAST CORNER. DOORS TO LEFT WERE FOR INTERIOR RAILROAD SPUR. ROLL-UP GARAGE DOOR TO RIGHT HAS REPLACED ORIGINAL PEDESTRIAN DOORS WHERE HOURLY SHIP WORKERS REPORTED TO WORK. - Rosie the Riveter National Historical Park, Ford Assembly Plant, 1400 Harbour Way South, Richmond, Contra Costa County, CA
7. INTERIOR OF LIVING ROOM SHOWING DISTINCTIVE 6LIGHT THREEPANEL DOOR, ...
7. INTERIOR OF LIVING ROOM SHOWING DISTINCTIVE 6-LIGHT THREE-PANEL DOOR, ONE OF THE NARROW 4-LIGHT OVER 4-LIGHT, DOUBLE-HUNG WINDOWS FRAMING THE FRONT DOOR, AND THE PAIRED 6-LIGHT OVER 1-LIGHT, DOUBLE-HUNG WINDOWS. VIEW TO NORTHWEST. - Bishop Creek Hydroelectric System, Plant 4, Worker Cottage, Bishop Creek, Bishop, Inyo County, CA
Lai, Chao-Lun; Fan, Chieh-Min; Liao, Pen-Chih; Tsai, Kuang-Chau; Yang, Chi-Yu; Chu, Shu-Hsun; Chien, Kuo-Liong
2009-04-01
This before-after study investigated the association between an audit program and door-to-balloon times in patients with acute ST-elevation myocardial infarction (STEMI) and explored other factors associated with the door-to-balloon time. An audit program that collected time data for essential time intervals in acute STEMI was developed with data feedback to both the Department of Emergency Medicine and the Department of Cardiology. The door-to-balloon times for 76 consecutive acute STEMI patients were collected from February 16, 2007, through October 31, 2007, after the implementation of the audit program, as the intervention group. The control group was defined by 104 consecutive acute STEMI patients presenting from April 1, 2006, through February 15, 2007, before the audit was applied. A multivariate linear regression model was used for analysis of factors associated with the door-to-balloon time. The geometric mean 95% CI of the door-to-balloon time decreased from 164.9 (150.3, 180.9) minutes to 141.9 (127.4, 158.2) minutes (p = 0.039) in the intervention phase. The median door-to-balloon time was 147.5 minutes in the control group and 136.0 minutes in the intervention group (p = 0.09). In the multivariate regression model, the audit program was associated with a shortening of the door-to-balloon time by 35.5 minutes (160.4 minutes vs. 195.9 minutes, p = 0.004); female gender was associated with a mean delay of 58.4 minutes (208.9 minutes vs. 150.5 minutes; p = 0.001); posterolateral wall infarction was associated with a mean delay of 70.5 minutes compared to anterior wall infarction (215.4 minutes vs. 144.9 minutes; p = 0.037) and a mean delay of 69.5 minutes compared to inferior wall infarction (215.4 minutes vs. 145.9 minutes; p = 0.044). The use of a glycoprotein IIb/IIIa inhibitor was associated with a 46.1 minutes mean shortening of door-to-balloon time (155.7 minutes vs. 201.8 minutes; p < 0.001). The implementation of an audit program was associated with a significant reduction in door-to-balloon times among patients with acute STEMI. In addition, female patients, posterolateral wall infarction territory, and nonuse of glycoprotein IIb/IIIa inhibitor were associated with longer door-to-balloon times.
Stauning, M T; Bediako-Bowan, A; Andersen, L P; Opintan, J A; Labi, A-K; Kurtzhals, J A L; Bjerrum, S
2018-07-01
Current literature examining the relationship between door-opening rate, number of people present, and microbial air contamination in the operating room is limited. Studies are especially needed from low- and middle-income countries, where the risk of surgical site infections is high. To assess microbial air contamination in operating rooms at a Ghanaian teaching hospital and the association with door-openings and number of people present. Moreover, we aimed to document reasons for door-opening. We conducted active air-sampling using an MAS 100 ® portable impactor during 124 clean or clean-contaminated elective surgical procedures. The number of people present, door-opening rate and the reasons for each door-opening were recorded by direct observation using pretested structured observation forms. During surgery, the mean number of colony-forming units (cfu) was 328 cfu/m 3 air, and 429 (84%) of 510 samples exceeded a recommended level of 180 cfu/m 3 . Of 6717 door-openings recorded, 77% were considered unnecessary. Levels of cfu/m 3 were strongly correlated with the number of people present (P = 0.001) and with the number of door-openings/h (P = 0.02). In empty operating rooms, the mean cfu count was 39 cfu/m 3 after 1 h of uninterrupted ventilation and 52 (51%) of 102 samples exceeded a recommended level of 35 cfu/m 3 . The study revealed high values of intraoperative airborne cfu exceeding recommended levels. Minimizing the number of door-openings and people present during surgery could be an effective strategy to reduce microbial air contamination in low- and middle-income settings. Copyright © 2017 The Author(s). Published by Elsevier Ltd.. All rights reserved.
Effectiveness of a myocardial infarction protocol in reducing door-to-ballon time.
Correia, Luis Cláudio Lemos; Brito, Mariana; Kalil, Felipe; Sabino, Michael; Garcia, Guilherme; Ferreira, Felipe; Matos, Iracy; Jacobs, Peter; Ronzoni, Liliana; Noya-Rabelo, Márcia
2013-07-01
An adequate door-to-balloon time (<120 minutes) is the necessary condition for the efficacy of primary angioplasty in infarction to translate into effectiveness. To describe the effectiveness of a quality of care protocol in reducing the door-to-balloon time. Between May 2010 and August 2012, all individuals undergoing primary angioplasty in our hospital were analyzed. The door time was electronically recorded at the moment the patient took a number to be evaluated in the emergency room, which occurred prior to filling the check-in forms and to the triage. The balloon time was defined as the beginning of artery opening (introduction of the first device). The first 5 months of monitoring corresponded to the period of pre-implementation of the protocol. The protocol comprised the definition of a flowchart of actions from patient arrival at the hospital, the team's awareness raising in relation to the prioritization of time, and provision of a periodic feedback on the results and possible inadequacies. A total of 50 individuals were assessed. They were divided into five groups of 10 sequential patients (one group pre- and four groups post-protocol). The door-to-balloon time regarding the 10 cases recorded before protocol implementation was 200 ± 77 minutes. After protocol implementation, there was a progressive reduction of the door-to-balloon time to 142±78 minutes in the first 10 patients, then to 150±50 minutes, 131±37 minutes and, finally, 116±29 minutes in the three sequential groups of 10 patients, respectively. Linear regression between sequential patients and the door-to-balloon time (r = - 0.41) showed a regression coefficient of - 1.74 minutes. The protocol implementation proved effective in the reduction of the door-to-balloon time.
Human-like characteristics for high degree of freedom robotic door-opening end-effector
NASA Astrophysics Data System (ADS)
Gray, Jeremy P.; Campagna, Frank
2011-05-01
In the field of military Unmanned Ground Vehicles (UGV's), military units are forced to sweep largely populated cities and towns in search of hostile enemies. These urban types of operations are referred to as MOUT (Military Operations on Urban Terrain). During urban operations, these UGV's encounter difficulties when opening doors. Current manipulator end effectors have these difficulties, because they are not designed to mimic human hand operations. This paper explains the mechanical nature of the Modular Universal Door Opening End-effector (MUDOE). MUDOE is a result of our development research to improve robotic manipulators ability to negotiate closed doors. The presented solution has the ability to mimic human hand characteristics when opening doors. The end-effector possesses an ability to maintain a high Degree of Freedom (DoF), and grasp the doorknob by applying equally distributed forces to all points of contact.
Scale model test results of several STOVL ventral nozzle concepts
NASA Technical Reports Server (NTRS)
Meyer, B. E.; Re, R. J.; Yetter, J. A.
1991-01-01
Short take-off and vertical landing (STOVL) ventral nozzle concepts are investigated by means of a static cold flow scale model at a NASA facility. The internal aerodynamic performance characteristics of the cruise, transition, and vertical lift modes are considered for four ventral nozzle types. The nozzle configurations examined include those with: butterfly-type inner doors and vectoring exit vanes; circumferential inner doors and thrust vectoring vanes; a three-port segmented version with circumferential inner doors; and a two-port segmented version with cylindrical nozzle exit shells. During the testing, internal and external pressure is measured, and the thrust and flow coefficients and resultant vector angles are obtained. The inner door used for ventral nozzle flow control is found to affect performance negatively during the initial phase of transition. The best thrust performance is demonstrated by the two-port segmented ventral nozzle due to the elimination of the inner door.
Rotational and frictional dynamics of the slamming of a door
NASA Astrophysics Data System (ADS)
Klein, Pascal; Müller, Andreas; Gröber, Sebastian; Molz, Alexander; Kuhn, Jochen
2017-01-01
A theoretical and experimental investigation of the rotational dynamics, including friction, of a slamming door is presented. Based on existing work regarding different damping models for rotational and oscillatory motions, we examine different forms for the (angular) velocity dependence (ωn, n = 0, 1, 2) of the frictional force. An analytic solution is given when all three friction terms are present and several solutions for specific cases known from the literature are reproduced. The motion of a door is investigated experimentally using a smartphone, and the data are compared with the theoretical results. A laboratory experiment under more controlled conditions is conducted to gain a deeper understanding of the movement of a slammed door. Our findings provide quantitative evidence that damping models involving quadratic air drag are most appropriate for the slamming of a door. Examining this everyday example of a physical phenomenon increases student motivation, because they can relate it to their own personal experience.
Doors for memory: A searchable database.
Baddeley, Alan D; Hitch, Graham J; Quinlan, Philip T; Bowes, Lindsey; Stone, Rob
2016-11-01
The study of human long-term memory has for over 50 years been dominated by research on words. This is partly due to lack of suitable nonverbal materials. Experience in developing a clinical test suggested that door scenes can provide an ecologically relevant and sensitive alternative to the faces and geometrical figures traditionally used to study visual memory. In pursuing this line of research, we have accumulated over 2000 door scenes providing a database that is categorized on a range of variables including building type, colour, age, condition, glazing, and a range of other physical characteristics. We describe an illustrative study of recognition memory for 100 doors tested by yes/no, two-alternative, or four-alternative forced-choice paradigms. These stimuli, together with the full categorized database, are available through a dedicated website. We suggest that door scenes provide an ecologically relevant and participant-friendly source of material for studying the comparatively neglected field of visual long-term memory.
16 CFR 1211.7 - Inherent entrapment protection requirements.
Code of Federal Regulations, 2010 CFR
2010-01-01
... door a minimum of 2 inches (50.8 mm). (b)(1) A solid object is to be placed on the floor of the test... the operator. When tested on the floor, the object shall be 1 inch (25.4 mm) high. In the test... when the door is fully closed. (2) For operators other than those attached to the door, a solid object...
ERIC Educational Resources Information Center
Scrivener, Susan; Au, Jenny
2007-01-01
In 2003, MDRC and a consortium of funders launched the Opening Doors demonstration to test reforms in six community colleges aimed at helping students stay in school and earn credentials. This report presents early results from the Opening Doors program at Lorain County Community College in Elyria, Ohio. The program provided intensive advising and…
16. NORTH BEDROOM INTERIOR SHOWING OPEN DOOR TO BATHROOM AT ...
16. NORTH BEDROOM INTERIOR SHOWING OPEN DOOR TO BATHROOM AT PHOTO LEFT, TWO 1 OVER 1 LIGHT DOUBLEHUNG, WOODFRAME WINDOWS IN A PAIRED ARRANGEMENT AT PHOTO CENTER, AND THE CLOSED DOOR TO THE KITCHEN AT PHOTO RIGHT. VIEW TO WEST. - Big Creek Hydroelectric System, Big Creek Town, Operator House, Orchard Avenue south of Huntington Lake Road, Big Creek, Fresno County, CA
46 CFR 170.255 - Class 1 doors; permissible locations.
Code of Federal Regulations, 2010 CFR
2010-10-01
... point at side, is at least 7 feet (2.14 meters) above the deepest load line. (b) Class 1 doors are..., the door is in a location where it will be closed at all times except when actually in use; and (2... lowest point at side is less than 7 feet (2.14 meters) above the deepest load line, an indicator light...
Federal Register 2010, 2011, 2012, 2013, 2014
2011-08-09
...), specified a test procedure that must be followed when determining the insulation value of the insulating... tests must be performed on walk-in panels and when tests may be performed on insulation foam used in the... WICF doors: The door type, R-value of the door insulation, and a declaration that the manufacturer has...
10. WEST FRONT OF SOUTH WING OF TECHWOOD DORMITORY, SHOWING ...
10. WEST FRONT OF SOUTH WING OF TECHWOOD DORMITORY, SHOWING MAIN ENTRANCE INTO SOUTH WING. ORIGINAL DOUBLE DOORS HAVE BEEN REPLACED WITH A SINGLE, WIDER DOOR. DOOR IS RECESSED AND HAS AN ELABORATE SURROUND LIKE THAT OF THE MAIN ENTRANCE (WEST FRONT) INTO THE NORTH WING. - Techwood Homes, McDaniel Dormitory, 581-587 Techwood Drive, Atlanta, Fulton County, GA
3. Detail of airplane tail protruding out of hangar doors, ...
3. Detail of airplane tail protruding out of hangar doors, dock no. 491. Detail of canvas gasket allowing doors to close tightly around fuselage. View to north. - Offutt Air Force Base, Looking Glass Airborne Command Post, Nose Docks, On either side of Hangar Access Apron at Northwest end of Project Looking Glass Historic District, Bellevue, Sarpy County, NE
16. INTERIOR OF BEDROOM NUMBER TWO SHOWING OPEN PANEL DOOR ...
16. INTERIOR OF BEDROOM NUMBER TWO SHOWING OPEN PANEL DOOR TO WALK-IN CLOSET AT PHOTO CENTER, OPEN PANEL DOOR FROM BEDROOM NUMBER ONE AT EXTREME PHOTO LEFT, AND 6-LIGHT OVER 1-LIGHT SASH WINDOW ON NORTH WALL AT PHOTO RIGHT. VIEW TO WEST. - Rush Creek Hydroelectric System, Worker Cottage, Rush Creek, June Lake, Mono County, CA
Code of Federal Regulations, 2014 CFR
2014-01-01
... 16 Commercial Practices 1 2014-01-01 2014-01-01 false Refrigerator-freezers With Automatic Defrost With Top-mounted Freezer With Through-the-door Ice Service A7 Appendix A7 to Part 305 Commercial... With Through-the-door Ice Service Range Information Manufacturer's Rated Total Refrigerated Volume in...
Code of Federal Regulations, 2014 CFR
2014-01-01
... 16 Commercial Practices 1 2014-01-01 2014-01-01 false Refrigerator-Freezers With Automatic Defrost With Top-Mounted Freezer Without Through-the-Door Ice Service A4 Appendix A4 to Part 305 Commercial... Without Through-the-Door Ice Service Range Information Manufacturer's Rated Total Refrigerated Volume in...
Code of Federal Regulations, 2014 CFR
2014-01-01
... 16 Commercial Practices 1 2014-01-01 2014-01-01 false Refrigerator-Freezers With Automatic Defrost With Side-Mounted Freezer Without Through-the-Door Ice Service A5 Appendix A5 to Part 305 Commercial... Without Through-the-Door Ice Service Range Information Manufacturer's Rated Total Refrigerated Volume in...
Code of Federal Regulations, 2014 CFR
2014-01-01
... 16 Commercial Practices 1 2014-01-01 2014-01-01 false Refrigerator-Freezers With Automatic Defrost With Bottom-Mounted Freezer Without Through-the-Door Ice Service A6 Appendix A6 to Part 305 Commercial... Freezer Without Through-the-Door Ice Service Range Information Manufacturer's Rated Total Refrigerated...
Code of Federal Regulations, 2014 CFR
2014-01-01
... 16 Commercial Practices 1 2014-01-01 2014-01-01 false Refrigerator-freezers With Automatic Defrost With Side-mounted Freezer With Through-the-door Ice Service A8 Appendix A8 to Part 305 Commercial... With Through-the-door Ice Service Range Information Manufacturer's Rated Total Refrigerated Volume in...
Shapiro, C.
1993-04-27
A high speed door assembly is described, comprising an actuator cylinder and piston rods, a pressure supply cylinder and fittings, an electrically detonated explosive bolt, a honeycomb structured door, a honeycomb structured decelerator, and a structural steel frame encasing the assembly to close over a 3 foot diameter opening within 50 milliseconds of actuation, to contain hazardous materials and vapors within a test fixture.
ERIC Educational Resources Information Center
Renzulli, Joseph S., Ed.
Six studies are presented which investigate factors in implementing the Revolving Door Identification Model (RDIM) and the Enrichment Triad Model in gifted education for children in grades 1-8. In "An Analysis of the Productivity of Gifted Students Participating in Programs Using the Revolving Door Identification Model," S. Reis reports,…
16 CFR 1211.7 - Inherent entrapment protection requirements.
Code of Federal Regulations, 2011 CFR
2011-01-01
... door a minimum of 2 inches (50.8 mm). (b)(1) A solid object is to be placed on the floor of the test... when the door is fully closed. (2) For operators other than those attached to the door, a solid object is not required to be located in line with the driving point of the operator. The solid object is to...
16 CFR 1211.7 - Inherent entrapment protection requirements.
Code of Federal Regulations, 2014 CFR
2014-01-01
... door a minimum of 2 inches (50.8 mm). (b)(1) A solid object is to be placed on the floor of the test... when the door is fully closed. (2) For operators other than those attached to the door, a solid object is not required to be located in line with the driving point of the operator. The solid object is to...
1987-09-09
and the flow of Ar, about 5 1/min, begun. The heliostat was set to track with the doors closed. The instrumentation was activated. Then both furnace...experiment, we closed both doors, stowed the heliostat and reopened the doors to provide good ventilation to the concentrator room. Then we disconnected the
MTR WING, TRA604, INTERIOR. BASEMENT. INTERIOR VIEW FROM SAME LOCATION ...
MTR WING, TRA-604, INTERIOR. BASEMENT. INTERIOR VIEW FROM SAME LOCATION IN WEST CORRIDOR AS PHOTO ID-33-G-42 BUT CAMERA FACES SOUTH. SIGN ON DOOR FOR "PIPE TUNNEL" WARNS OF RADIOLOGICAL AND ASBESTOS HAZARDS. DOOR HAS METAL HASPS. SIGN ON OVERHEAD WASTE HEAT RECOVERY PIPES SAYS THEY CONTAIN "ASBESTOS FREE INSULATION." FIRE DOOR AT LEFT LEADS TO STAIRWAY TO FIRST FLOOR. DOOR AT RIGHT LEADS TO ROOM WHICH ONCE CONTAINED MTR LIBRARY. INL NEGATIVE NO. HD46-13-4. Mike Crane, Photographer, 2/2005 - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID
Modeling and Simulation of Two Wheelchair Accessories for Pushing Doors.
Abdullah, Soran Jalal; Shaikh Mohammed, Javeed
2017-03-27
Independent mobility is vital to individuals of all ages, and wheelchairs have proven to be great personal mobility devices. The tasks of opening and navigating through a door are trivial for healthy people, while the same tasks could be difficult for some wheelchair users. A wide range of intelligent wheelchair controllers and systems, robotic arms, or manipulator attachments integrated with wheelchairs have been developed for various applications, including manipulating door knobs. Unfortunately, the intelligent wheelchairs and robotic attachments are not widely available as commercial products. Therefore, the current manuscript presents the modeling and simulation of a novel but simple technology in the form of a passive wheelchair accessory (straight, arm-like with a single wheel, and arc-shaped with multiple wheels) for pushing doors open from a wheelchair. From the simulations using different wheel shapes and sizes, it was found that the arc-shaped accessory could push open the doors faster and with almost half the required force as compared to the arm-like accessory. Also, smaller spherical wheels were found to be best in terms of reaction forces on the wheels. Prototypes based on the arc-shaped accessory design will be manufactured and evaluated for pushing doors open and dodging or gliding other obstacles.
Influence of the Pressure Difference and Door Swing on Heavy Contaminants Migration between Rooms
Hendiger, Jacek; Chludzińska, Marta; Ziętek, Piotr
2016-01-01
This paper presents the results of investigations whose aim was to describe the influence of the pressure difference level on the ability of contaminants migration between neighbouring rooms in dynamic conditions associated with door swing. The analysis was based on airflow visualization made with cold smoke, which simulated the heavy contaminants. The test room was pressurized to a specific level and then the door was opened to observe the trail of the smoke plume in the plane of the door. The door was opened in both directions: to the positively and negatively pressurized room. This study focuses on the visualization of smoke plume discharge and an uncertainty analysis is not applicable. Unlike other studies which focus on the analysis of pressure difference, the present study looks at the contaminants which are heavier than air and on “pumping out” the contaminants by means of door swing. Setting the proper level of pressure difference between the contaminated room and the neighbouring rooms can prove instrumental in ensuring protection against toxic contaminants migration. This study helped to establish the threshold of pressure difference necessary to reduce migration of heavy contaminants to neighbouring rooms. PMID:27171260
Influence of the Pressure Difference and Door Swing on Heavy Contaminants Migration between Rooms.
Hendiger, Jacek; Chludzińska, Marta; Ziętek, Piotr
2016-01-01
This paper presents the results of investigations whose aim was to describe the influence of the pressure difference level on the ability of contaminants migration between neighbouring rooms in dynamic conditions associated with door swing. The analysis was based on airflow visualization made with cold smoke, which simulated the heavy contaminants. The test room was pressurized to a specific level and then the door was opened to observe the trail of the smoke plume in the plane of the door. The door was opened in both directions: to the positively and negatively pressurized room. This study focuses on the visualization of smoke plume discharge and an uncertainty analysis is not applicable. Unlike other studies which focus on the analysis of pressure difference, the present study looks at the contaminants which are heavier than air and on "pumping out" the contaminants by means of door swing. Setting the proper level of pressure difference between the contaminated room and the neighbouring rooms can prove instrumental in ensuring protection against toxic contaminants migration. This study helped to establish the threshold of pressure difference necessary to reduce migration of heavy contaminants to neighbouring rooms.
Krall, Scott P; Cornelius, Angela P; Addison, J Bruce
2014-03-01
To analyze the correlation between the many different emergency department (ED) treatment metric intervals and determine if the metrics directly impacted by the physician correlate to the "door to room" interval in an ED (interval determined by ED bed availability). Our null hypothesis was that the cause of the variation in delay to receiving a room was multifactorial and does not correlate to any one metric interval. We collected daily interval averages from the ED information system, Meditech©. Patient flow metrics were collected on a 24-hour basis. We analyzed the relationship between the time intervals that make up an ED visit and the "arrival to room" interval using simple correlation (Pearson Correlation coefficients). Summary statistics of industry standard metrics were also done by dividing the intervals into 2 groups, based on the average ED length of stay (LOS) from the National Hospital Ambulatory Medical Care Survey: 2008 Emergency Department Summary. Simple correlation analysis showed that the doctor-to-discharge time interval had no correlation to the interval of "door to room (waiting room time)", correlation coefficient (CC) (CC=0.000, p=0.96). "Room to doctor" had a low correlation to "door to room" CC=0.143, while "decision to admitted patients departing the ED time" had a moderate correlation of 0.29 (p <0.001). "New arrivals" (daily patient census) had a strong correlation to longer "door to room" times, 0.657, p<0.001. The "door to discharge" times had a very strong correlation CC=0.804 (p<0.001), to the extended "door to room" time. Physician-dependent intervals had minimal correlation to the variation in arrival to room time. The "door to room" interval was a significant component to the variation in "door to discharge" i.e. LOS. The hospital-influenced "admit decision to hospital bed" i.e. hospital inpatient capacity, interval had a correlation to delayed "door to room" time. The other major factor affecting department bed availability was the "total patients per day." The correlation to the increasing "door to room" time also reflects the effect of availability of ED resources (beds) on the patient evaluation time. The time that it took for a patient to receive a room appeared more dependent on the system resources, for example, beds in the ED, as well as in the hospital, than on the physician.
Prevalence of dementia among population age over 45 years in Chiang Mai, Thailand.
Wangtongkum, Suparus; Sucharitkul, Phongsakorn; Silprasert, Nutcharut; Inthrachak, Rudeethawinl
2008-11-01
To determine the prevalence of dementia in Thai people with age 45 years and above. This project used a cross sectional research design to study the prevalence of dementia in Chiang Mai. Door-to-door technique was assigned in condition with multi-stage probability random sampling to obtain subjects representing the population of Chiang Mai between Oct 2004 and Sep 2005. The researchers collected the data from the subjects aged 45 years and above. All subjects were located from every Amphurs of Chiang Mai. They were first screened with Thai Mini Mental State Examination (TMSE) and Thai Beck Depression Inventory (BDI). The subjects whose TMSE was less than 24 were assessed and diagnosed by a neurologist. Subjects who were determined as having dementia might be laboratory analyzed and classified based on DSM-IV and NINDS-AIREN criteria. The authors enrolled 2,311 people and screened them with Batteries test. One thousand four hundred ninety two people qualified with 610 males and 882 females, whose mean age was 59.7 +/- 10.4 years. The authors found that among the 35 people with dementia, the mean age was 67.9 +/- 8.9 years (45-88 years). The prevalence of dementia among the study participants was 2.35%. In the present study, Alzheimer's disease was the most common type of dementia diagnosed (75.0%) and vascular dementia was the second most commonly diagnosed (12.5%). The prevalence of dementia in Chiang Mai was 2.35%, which does not differ from the previous study Alzheimer's disease was the most common type of dementia diagnosed.
Short- and long-term effects of imprisonment on future felony convictions and prison admissions.
Harding, David J; Morenoff, Jeffrey D; Nguyen, Anh P; Bushway, Shawn D
2017-10-17
A substantial contributor to prison admissions is the return of individuals recently released from prison, which has come to be known as prison's "revolving door." However, it is unclear whether being sentenced to prison itself has a causal effect on the probability of a subsequent return to prison or on criminal behavior. To examine the causal effect of being sentenced to prison on subsequent offending and reimprisonment, we leverage a natural experiment using the random assignment of judges with different propensities for sentencing offenders to prison. Drawing on data on all individuals sentenced for a felony in Michigan between 2003 and 2006, we compare individuals sentenced to prison to those sentenced to probation, taking into account sentence lengths and stratifying our analysis by race. Results show that being sentenced to prison rather than probation increases the probability of imprisonment in the first 3 years after release from prison by 18 percentage points among nonwhites and 19 percentage points among whites. Further results show that such effects are driven primarily by imprisonment for technical violations of community supervision rather than new felony convictions. This suggests that more stringent postprison parole supervision (relative to probation supervision) increases imprisonment through the detection and punishment of low-level offending or violation behavior. Such behavior would not otherwise result in imprisonment for someone who had not already been to prison or who was not on parole. These results demonstrate that the revolving door of prison is in part an effect of the nature of postprison supervision.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 49 Transportation 9 2010-10-01 2010-10-01 false Adjusting and transferring loads, and car loading devices and grain doors (accounts XX-33-71 and XX-33-72). 1242.74 Section 1242.74 Transportation Other... loads, and car loading devices and grain doors (accounts XX-33-71 and XX-33-72). These accounts pertain...
ERIC Educational Resources Information Center
Thompson, Michael; Tsui, Stella; Leung, Chi Fan
2011-01-01
A sweet spot is referred to in sport as the perfect place to strike a ball with a racquet or bat. It is the point of contact between bat and ball where maximum results can be produced with minimal effort from the hand of the player. Similar physics can be applied to the less inspiring examples of door stops; the perfect position of a door stop is…
Code of Federal Regulations, 2012 CFR
2012-07-01
... included in the total open area calculation with the exception of access panels, doors, and/or hatches that... than 1.0 inch clearance. (7) The access panels, doors, and/or hatches that are part of the enclosure must close tightly. Damaged access panels, doors, and/or hatches that do not close tightly must be...
PBF Reactor Building (PER620). Camera faces south toward verticallift door, ...
PBF Reactor Building (PER-620). Camera faces south toward vertical-lift door, which is closed. Note crane and its trolley positioned near door; its rails along side walls. Reactor vessel and lifting beams are positioned above reactor pit. Photographer: John Capek. Date: January 9, 1970. INEEL negative no. 70-132 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID
Holiday Door Decorating Contest Brings Cheer | Poster
By Carolynne Keenan, Contributing Writer Other than the time of year, what do the following have in common: the leg lamp from the movie “A Christmas Story,” a compilation of silly holiday jokes, a gingerbread house, and Santa on a motorcycle? All four were among the individual door winners for the Holiday Door Decorating Contest, held at NCI at Frederick in December. Employees
12. INTERIOR OF KITCHEN/UTILITY AREA SHOWING OPEN FOURPANEL WOOD DOOR ...
12. INTERIOR OF KITCHEN/UTILITY AREA SHOWING OPEN FOUR-PANEL WOOD DOOR TO SOUTH BEDROOM AT PHOTO CENTER RIGHT, OPEN DOORWAY TO LIVING ROOM AT PHOTO CENTER LEFT, AND BUILT-IN CABINETS AND CEILING VENT BETWEEN THE DOORS AND AROUND THE STOVE/RANGE POSITION. VIEW TO NORTHEAST. - Bishop Creek Hydroelectric System, Plant 4, Worker Cottage, Bishop Creek, Bishop, Inyo County, CA
Design concepts for a composite door frame system for general automotive applications
NASA Technical Reports Server (NTRS)
Tauber, J. A.
1976-01-01
Conceptual design, manufacturing process, and costs are explored to determine the feasibility of replacing present steel parts in automotive door structures with various composite materials. The problems of conforming to present anti-intrusion specifications with advanced materials are examined and discussed. Modest weight reductions, at competitive costs, were identified for the utilization of specific composite materials in automotive door structures.
Code of Federal Regulations, 2012 CFR
2012-01-01
... 16 Commercial Practices 1 2012-01-01 2012-01-01 false Refrigerator-Freezers With Automatic Defrost With Side-Mounted Freezer Without Through-the-Door Ice Service A5 Appendix A5 to Part 305 Commercial...—Refrigerator-Freezers With Automatic Defrost With Side-Mounted Freezer Without Through-the-Door Ice Service...
Code of Federal Regulations, 2012 CFR
2012-01-01
... 16 Commercial Practices 1 2012-01-01 2012-01-01 false Refrigerator-freezers With Automatic Defrost With Top-mounted Freezer With Through-the-door Ice Service A7 Appendix A7 to Part 305 Commercial...—Refrigerator-freezers With Automatic Defrost With Top-mounted Freezer With Through-the-door Ice Service Range...
Code of Federal Regulations, 2011 CFR
2011-01-01
... 16 Commercial Practices 1 2011-01-01 2011-01-01 false Refrigerator-Freezers With Automatic Defrost With Top-Mounted Freezer Without Through-the-Door Ice Service A4 Appendix A4 to Part 305 Commercial...—Refrigerator-Freezers With Automatic Defrost With Top-Mounted Freezer Without Through-the-Door Ice Service...
Code of Federal Regulations, 2011 CFR
2011-01-01
... 16 Commercial Practices 1 2011-01-01 2011-01-01 false Refrigerator-Freezers With Automatic Defrost With Bottom-Mounted Freezer Without Through-the-Door Ice Service A6 Appendix A6 to Part 305 Commercial...—Refrigerator-Freezers With Automatic Defrost With Bottom-Mounted Freezer Without Through-the-Door Ice Service...
Code of Federal Regulations, 2010 CFR
2010-01-01
... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Refrigerator-Freezers With Automatic Defrost With Top-Mounted Freezer Without Through-the-Door Ice Service A4 Appendix A4 to Part 305 Commercial...—Refrigerator-Freezers With Automatic Defrost With Top-Mounted Freezer Without Through-the-Door Ice Service...
Code of Federal Regulations, 2013 CFR
2013-01-01
... 16 Commercial Practices 1 2013-01-01 2013-01-01 false Refrigerator-Freezers With Automatic Defrost With Side-Mounted Freezer Without Through-the-Door Ice Service A5 Appendix A5 to Part 305 Commercial...—Refrigerator-Freezers With Automatic Defrost With Side-Mounted Freezer Without Through-the-Door Ice Service...
Code of Federal Regulations, 2010 CFR
2010-01-01
... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Refrigerator-Freezers With Automatic Defrost With Bottom-Mounted Freezer Without Through-the-Door Ice Service A6 Appendix A6 to Part 305 Commercial...—Refrigerator-Freezers With Automatic Defrost With Bottom-Mounted Freezer Without Through-the-Door Ice Service...
Code of Federal Regulations, 2010 CFR
2010-01-01
... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Refrigerator-freezers With Automatic Defrost With Top-mounted Freezer With Through-the-door Ice Service A7 Appendix A7 to Part 305 Commercial...—Refrigerator-freezers With Automatic Defrost With Top-mounted Freezer With Through-the-door Ice Service Range...
Code of Federal Regulations, 2010 CFR
2010-01-01
... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Refrigerator-Freezers With Automatic Defrost With Side-Mounted Freezer Without Through-the-Door Ice Service A5 Appendix A5 to Part 305 Commercial...—Refrigerator-Freezers With Automatic Defrost With Side-Mounted Freezer Without Through-the-Door Ice Service...
Code of Federal Regulations, 2013 CFR
2013-01-01
... 16 Commercial Practices 1 2013-01-01 2013-01-01 false Refrigerator-Freezers With Automatic Defrost With Bottom-Mounted Freezer Without Through-the-Door Ice Service A6 Appendix A6 to Part 305 Commercial...—Refrigerator-Freezers With Automatic Defrost With Bottom-Mounted Freezer Without Through-the-Door Ice Service...
Code of Federal Regulations, 2012 CFR
2012-01-01
... 16 Commercial Practices 1 2012-01-01 2012-01-01 false Refrigerator-freezers With Automatic Defrost With Side-mounted Freezer With Through-the-door Ice Service A8 Appendix A8 to Part 305 Commercial...—Refrigerator-freezers With Automatic Defrost With Side-mounted Freezer With Through-the-door Ice Service Range...
Code of Federal Regulations, 2011 CFR
2011-01-01
... 16 Commercial Practices 1 2011-01-01 2011-01-01 false Refrigerator-freezers With Automatic Defrost With Side-mounted Freezer With Through-the-door Ice Service A8 Appendix A8 to Part 305 Commercial...—Refrigerator-freezers With Automatic Defrost With Side-mounted Freezer With Through-the-door Ice Service Range...
Code of Federal Regulations, 2013 CFR
2013-01-01
... 16 Commercial Practices 1 2013-01-01 2013-01-01 false Refrigerator-Freezers With Automatic Defrost With Top-Mounted Freezer Without Through-the-Door Ice Service A4 Appendix A4 to Part 305 Commercial...—Refrigerator-Freezers With Automatic Defrost With Top-Mounted Freezer Without Through-the-Door Ice Service...
Code of Federal Regulations, 2013 CFR
2013-01-01
... 16 Commercial Practices 1 2013-01-01 2013-01-01 false Refrigerator-freezers With Automatic Defrost With Top-mounted Freezer With Through-the-door Ice Service A7 Appendix A7 to Part 305 Commercial...—Refrigerator-freezers With Automatic Defrost With Top-mounted Freezer With Through-the-door Ice Service Range...
Code of Federal Regulations, 2012 CFR
2012-01-01
... 16 Commercial Practices 1 2012-01-01 2012-01-01 false Refrigerator-Freezers With Automatic Defrost With Top-Mounted Freezer Without Through-the-Door Ice Service A4 Appendix A4 to Part 305 Commercial...—Refrigerator-Freezers With Automatic Defrost With Top-Mounted Freezer Without Through-the-Door Ice Service...
Code of Federal Regulations, 2010 CFR
2010-01-01
... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Refrigerator-freezers With Automatic Defrost With Side-mounted Freezer With Through-the-door Ice Service A8 Appendix A8 to Part 305 Commercial...—Refrigerator-freezers With Automatic Defrost With Side-mounted Freezer With Through-the-door Ice Service Range...
Code of Federal Regulations, 2011 CFR
2011-01-01
... 16 Commercial Practices 1 2011-01-01 2011-01-01 false Refrigerator-Freezers With Automatic Defrost With Side-Mounted Freezer Without Through-the-Door Ice Service A5 Appendix A5 to Part 305 Commercial...—Refrigerator-Freezers With Automatic Defrost With Side-Mounted Freezer Without Through-the-Door Ice Service...
Code of Federal Regulations, 2011 CFR
2011-01-01
... 16 Commercial Practices 1 2011-01-01 2011-01-01 false Refrigerator-freezers With Automatic Defrost With Top-mounted Freezer With Through-the-door Ice Service A7 Appendix A7 to Part 305 Commercial...—Refrigerator-freezers With Automatic Defrost With Top-mounted Freezer With Through-the-door Ice Service Range...
Code of Federal Regulations, 2012 CFR
2012-01-01
... 16 Commercial Practices 1 2012-01-01 2012-01-01 false Refrigerator-Freezers With Automatic Defrost With Bottom-Mounted Freezer Without Through-the-Door Ice Service A6 Appendix A6 to Part 305 Commercial...—Refrigerator-Freezers With Automatic Defrost With Bottom-Mounted Freezer Without Through-the-Door Ice Service...
Code of Federal Regulations, 2013 CFR
2013-01-01
... 16 Commercial Practices 1 2013-01-01 2013-01-01 false Refrigerator-freezers With Automatic Defrost With Side-mounted Freezer With Through-the-door Ice Service A8 Appendix A8 to Part 305 Commercial...—Refrigerator-freezers With Automatic Defrost With Side-mounted Freezer With Through-the-door Ice Service Range...
NREL and iUnit Open the Door to Grid-Integrated, Multifamily Construction |
Open the Door to Grid-Integrated, Multifamily Construction May 11, 2017 A photo of a group of people News | NREL and iUnit Open the Door to Grid-Integrated, Multifamily Construction NREL and iUnit apartment created by Denver developer, iUnit. Open house participants were able to tour the unit in person
4. Detail of inner side of northernmost door of Bunker ...
4. Detail of inner side of northernmost door of Bunker 103 (seen from outside in photo WA-203-B-2). Stenciling on door includes warning: 'CAUTION: Do not drag or pull powder kegs over deck or other cans. Tanks must be lifted or carried.' - Puget Sound Naval Shipyard, Munitions Storage Bunker, Naval Ammunitions Depot, North of Campbell Trail, Bremerton, Kitsap County, WA
16 CFR § 1211.7 - Inherent entrapment protection requirements.
Code of Federal Regulations, 2013 CFR
2013-01-01
... operator reverses the door a minimum of 2 inches (50.8 mm). (b)(1) A solid object is to be placed on the... the door, a solid object is not required to be located in line with the driving point of the operator. The solid object is to be located at points at the center, and within 1 foot of each end of the door...
Federal Register 2010, 2011, 2012, 2013, 2014
2010-04-02
... eddy current inspection for cracking of the keyway of the fuel tank access door cutout on the left and... frequency eddy current (HFEC) inspection for cracking at the keyway of the fuel tank access door cutout on... frequency eddy current (HFEC) inspection for cracking of the keyway of the fuel tank access door cutout on...
Determination of secondhand smoke leakage from the smoking room of an Internet café.
Kim, Hyejin; Lee, Kiyoung; An, Jaehoon; Won, Sungho
2017-10-01
Although Internet cafes have been designated as nonsmoking areas in Korea, smoke-free legislation has allowed the installation of indoor smoking rooms. The purposes of this study were to determine secondhand smoke (SHS) leakage from an Internet café smoking room and to identify factors associated with SHS leakage. PM 2.5 (particulate matter with an aerodynamic diameter ≤2.5 μm) mass concentrations were measured simultaneously both inside and outside the door to the smoking room. During each measurement, a field technician observed how long the smoking room door was opened and closed, the direction of door opening, and the number of smokers. A multivariate linear regression model was used to identify the causality of SHS leakage from the smoking room. A time series of PM 2.5 concentrations both inside and outside the door to the smoking room showed a similar trend. SHS leakage was significantly increased because of factors associated with the direction of the smoking room door being opened, the duration of how long the smoking room door was opened until it was closed, and the average PM 2.5 concentration inside the smoking room when the door was opened. SHS leakage from inside the smoking room to outside the smoking room was evident especially when the smoking room door was opened. Since the smoking room is not effective in preventing SHS exposure, the smoking room should be removed from the facilities to protect citizens from SHS exposure through revision of the current legislation, which permits installation of a smoking room. This paper concerns secondhand smoke (SHS) leakage from indoor smoking room. Unlike previous studies, the authors statistically analyzed the causality of PM 2.5 concentration leakage from a smoking room using time-series analysis. Since the authors selected the most common smoking room, the outcomes could be generalized. The study demonstrated that SHS leakage from smoking room and SHS leakage were clearly associated with door opening. The finding demonstrated ineffectiveness of smoking room to protect citizens and supports removal of indoor smoking room.
First floor plan. (Also includes a door schedule and door ...
First floor plan. (Also includes a door schedule and door elevations). March Air Force Base, Riverside, California, Combat Operations Center, Combat Operations Building. By Moffatt and Nichol, Engineers, 122 West Fifth Street, Long Beach, California; for the Corps of Engineers, U.S. Army, Office of the District Engineer, Los Angeles, California. Drawing no. AW-60-02-03, sheet no. 12, approved March 1962; specifications no. OCI-62-66; D.O. series AW 1596/12, Rev. "C"; file drawer 1290. Last revised 25 August 1975. Scale one-eighth inch to one foot. 28.5x 41 inches. pencil on paper - March Air Force Base, Strategic Air Command, Combat Operations Center, 5220 Riverside Drive, Moreno Valley, Riverside County, CA
Landing Gear Door Liners for Airframe Noise Reduction
NASA Technical Reports Server (NTRS)
Jones, Michael G. (Inventor); Howerton, Brian M. (Inventor); Van De Ven, Thomas (Inventor)
2014-01-01
A landing gear door for retractable landing gear of aircraft includes an acoustic liner. The acoustic liner includes one or more internal cavities or chambers having one or more openings that inhibit the generation of sound at the surface and/or absorb sound generated during operation of the aircraft. The landing gear door may include a plurality of internal chambers having different geometries to thereby absorb broadband noise.
A&M. TAN633. Sections show view of hot cell caskentry doors, ...
A&M. TAN-633. Sections show view of hot cell cask-entry doors, manipulators in each cell, drainage trenches, door and room details. Ralph M. Parsons 1229-13-ANP/GE-3-633-A-2. Date: December 1956. Approved by INEEL Classification Office for public release. INNEL index code no. 034-0633-00-693-107316 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID
The Analysis and Development of a Mechanical Breadboard Structure
2006-12-01
a George Foreman© grill, a garage door opener, a smoothie blender, and a heavy duty stapler. The customer needs for each product and their...cordless drill, a smoothie blender, a small George Foreman© grill, a garage door opener, and heavy duty stapler. The cordless drill and smoothie ...individually. Table 6: Sample Products and Mechanical Areas Product George Foreman Grill Cordless Drill Garage Door Opener Smoothie Blender
Use of automatic door closers improves fire safety.
Waterman, T E
1979-01-01
In a series of 16 full-scale fire tests, investigators at the IIT Research Institute have concluded that automatic door control in the room of fire origin can significantly reduce the spread of toxic smoke and gases. The researchers also investigated the effects of sprinkler actuation, and the functional relationship between sprinklers and automatic door closers. This report presents the results of the study, and presents recommendations for health-care facilities.
18. BATHROOM INTERIOR SHOWING OPEN DOOR TO SOUTH BEDROOM AT ...
18. BATHROOM INTERIOR SHOWING OPEN DOOR TO SOUTH BEDROOM AT PHOTO CENTER, TOILET AT EXTREME PHOTO RIGHT BOTTOM, OPEN DOOR TO MEDICINE CABINET AT PHOTO RIGHT. A WALLPAPER WAINSCOT COVERS THE LOWER PORTION OF THE ORIGINAL FIBERBOARD WALL COVERING. THE FLOOR IS LINOLEUM. VIEW TO SOUTHEAST. - Big Creek Hydroelectric System, Big Creek Town, Operator House, Orchard Avenue south of Huntington Lake Road, Big Creek, Fresno County, CA
ERIC Educational Resources Information Center
Petruso, Karl M.
2006-01-01
The semiotics of the stuff faculty stick to their office doors has recently attracted scholarly interest. It has been noted that these office doors represent a blank canvas, a space that a professor can fill with images and texts that furnish clues to his or her beliefs, interests, and philosophy of learning. This present study was inspired by the…
Lessons Learned Implementing DOORS in a Citrix Environment
NASA Technical Reports Server (NTRS)
Bussman, Marie
2005-01-01
NASA's James Web Space Telescope (JWST) Project is a large multi-national project with geographically dispersed contractors that all need access to the Projects requirement database. Initially, the project utilized multiple DOORS databases with the built-in partitions feature to exchange modules amongst the various contractor sites. As the requirements databases matured the use of partitions became extremely difficult. There have been many issues such as incompatible versions of DOORS, inefficient mechanism for sharing modules, security concerns, performance issues, and inconsistent document import and export formats. Deployment of the client software with limited IT resources available was also an issue. The solution chosen by JWST was to integrate the use of a Citrix environment with the DOORS database to address most of the project concerns. The use of the Citrix solution allowed a single Requirements database in a secure environment via a web interface. The Citrix environment allows JWST to upgrade to the most current version of DOORS without having to coordinate multiple sites and user upgrades. The single requirements database eliminates a multitude of Configuration Management concerns and facilitated the standardization of documentation formats. This paper discusses the obstacles and the lessons learned throughout the installation, implementation, usage and deployment process of a centralized DOORS database solution.
Indoor Modelling from Slam-Based Laser Scanner: Door Detection to Envelope Reconstruction
NASA Astrophysics Data System (ADS)
Díaz-Vilariño, L.; Verbree, E.; Zlatanova, S.; Diakité, A.
2017-09-01
Updated and detailed indoor models are being increasingly demanded for various applications such as emergency management or navigational assistance. The consolidation of new portable and mobile acquisition systems has led to a higher availability of 3D point cloud data from indoors. In this work, we explore the combined use of point clouds and trajectories from SLAM-based laser scanner to automate the reconstruction of building indoors. The methodology starts by door detection, since doors represent transitions from one indoor space to other, which constitutes an initial approach about the global configuration of the point cloud into building rooms. For this purpose, the trajectory is used to create a vertical point cloud profile in which doors are detected as local minimum of vertical distances. As point cloud and trajectory are related by time stamp, this feature is used to subdivide the point cloud into subspaces according to the location of the doors. The correspondence between subspaces and building rooms is not unambiguous. One subspace always corresponds to one room, but one room is not necessarily depicted by just one subspace, for example, in case of a room containing several doors and in which the acquisition is performed in a discontinue way. The labelling problem is formulated as combinatorial approach solved as a minimum energy optimization. Once the point cloud is subdivided into building rooms, envelop (conformed by walls, ceilings and floors) is reconstructed for each space. The connectivity between spaces is included by adding the previously detected doors to the reconstructed model. The methodology is tested in a real case study.
Application research of rail transit safety protection based on laser detection
NASA Astrophysics Data System (ADS)
Wang, Zhifei
2016-10-01
Platform screen door can not only prevent the passengers fell or jumped the track danger, to passengers bring comfortable waiting environment, but also has the function of environmental protection and energy saving. But platform screen door and train the full-length gap region is insecure in the system design of a hidden, such as passengers for some reason (grab the train) in the interstitial region retention, is sandwiched between the intercity safety door and the door, and such as the region lacks security detection and alarm system, once the passengers in the gap region retention (caught), bring more serious threat to the safety of passengers and traffic safety. This paper from the point of view of the design presents the physical, infrared, laser three safety protection device setting schemes. Domestic intelligence of between rail transit shield door and train security clearance processing used is screen door system standard configuration, the obstacle detection function for avoid passengers stranded in the clearance has strong prevention function. Laser detection research and development projects can access to prevent shield door and train gap clamp safety measures. Rail safety protection method are studied applying laser detection technique. According to the laser reflection equation of foreign body, the characteristics of laser detection of foreign bodies are given in theory. By using statistical analysis method, the workflow of laser detection system is established. On this basis, protection methods is proposed. Finally the simulation and test results show that the laser detection technology in the rail traffic safety protection reliability and stability, And the future laser detection technology in is discussed the development of rail transit.
Conformational states and recognition of amyloidogenic peptides of human insulin-degrading enzyme.
McCord, Lauren A; Liang, Wenguang G; Dowdell, Evan; Kalas, Vasilios; Hoey, Robert J; Koide, Akiko; Koide, Shohei; Tang, Wei-Jen
2013-08-20
Insulin-degrading enzyme (IDE) selectively degrades the monomer of amyloidogenic peptides and contributes to clearance of amyloid β (Aβ). Thus, IDE retards the progression of Alzheimer's disease. IDE possesses an enclosed catalytic chamber that engulfs and degrades its peptide substrates; however, the molecular mechanism of IDE function, including substrate access to the chamber and recognition, remains elusive. Here, we captured a unique IDE conformation by using a synthetic antibody fragment as a crystallization chaperone. An unexpected displacement of a door subdomain creates an ~18-Å opening to the chamber. This swinging-door mechanism permits the entry of short peptides into the catalytic chamber and disrupts the catalytic site within IDE door subdomain. Given the propensity of amyloidogenic peptides to convert into β-strands for their polymerization into amyloid fibrils, they also use such β-strands to stabilize the disrupted catalytic site resided at IDE door subdomain for their degradation by IDE. Thus, action of the swinging door allows IDE to recognize amyloidogenicity by substrate-induced stabilization of the IDE catalytic cleft. Small angle X-ray scattering (SAXS) analysis revealed that IDE exists as a mixture of closed and open states. These open states, which are distinct from the swinging door state, permit entry of larger substrates (e.g., Aβ, insulin) to the chamber and are preferred in solution. Mutational studies confirmed the critical roles of the door subdomain and hinge loop joining the N- and C-terminal halves of IDE for catalysis. Together, our data provide insights into the conformational changes of IDE that govern the selective destruction of amyloidogenic peptides.
Gibson, Andrew D; Handel, Ian G; Shervell, Kate; Roux, Tarryn; Mayer, Dagmar; Muyila, Stanford; Maruwo, Golden B; Nkhulungo, Edwin M. S; Foster, Rachel A; Chikungwa, Patrick; Chimera, Bernard; Bronsvoort, Barend M.deC; Mellanby, Richard J; Gamble, Luke
2016-01-01
An estimated 60,000 people die of rabies annually. The vast majority of cases of human rabies develop following a bite from an infected dog. Rabies can be controlled in both human and canine populations through widespread vaccination of dogs. Rabies is particularly problematic in Malawi, costing the country an estimated 13 million USD and 484 human deaths annually, with an increasing paediatric incidence in Blantyre City. Consequently, the aim of this study was to vaccinate a minimum of 75% of all the dogs within Blantyre city during a one month period. Blantyre’s 25 administrative wards were divided into 204 working zones. For initial planning, a mean human:dog ratio from the literature enabled estimation of dog population size and dog surveys were then performed in 29 working zones in order to assess dog distribution by land type. Vaccination was conducted at static point stations at weekends, at a total of 44 sites, with each operating for an average of 1.3 days. On Monday to Wednesday, door-to-door vaccination sessions were undertaken in the areas surrounding the preceding static point stations. 23,442 dogs were vaccinated at static point stations and 11,774 dogs were vaccinated during door-to-door vaccinations. At the end of the 20 day vaccination programme, an assessment of vaccination coverage through door-to-door surveys found that of 10,919 dogs observed, 8,661 were vaccinated resulting in a vaccination coverage of 79.3% (95%CI 78.6–80.1%). The estimated human:dog ratio for Blantyre city was 18.1:1. Mobile technology facilitated the collection of data as well as efficient direction and coordination of vaccination teams in near real time. This study demonstrates the feasibility of vaccinating large numbers of dogs at a high vaccination coverage, over a short time period in a large African city. PMID:27414810
NASA Technical Reports Server (NTRS)
Choi, Michael K.
1999-01-01
There was a thermal anomaly of the Landsat-7 Enhanced Thematic Mapper Plus (ETM+) radiative cooler cold stage during the cooler outgas phase in flight. With the cooler door in the outgas position and the outgas heaters enabled, the cold stage temperature increased to a maximum of 323 K when the spacecraft was in the sunlight, which was warmer than the 316.3 K upper set point of the outgas heater controller on the cold stage. Also, the outgas heater cycled off when the cold stage was warming up to 323 K. A corrective action was taken before the attitude of the spacecraft was changed during the first week in flight. One orbit before the attitude was changed, the outgas heaters were disabled to cool off the cold stage. The cold stage temperature increase was strongly dependent on the spacecraft roll and yaw. It provided evidence that direct solar radiation entered the gap between the cooler door and cooler shroud. There was a concern that the direct solar radiation could cause polymerization of hydrocarbons, which could contaminate the cooler and lead to a thermal short. After outgas with the cooler door in the outgas position for seven days, the cooler door was changed to the fully open position. With the cooler door fully open, the maximum cold stage temperature was 316.3 K when the spacecraft was in the sunlight, and the duty cycle of the outgas heater in the eclipse was the same as that in the sunlight. It provided more evidence that direct solar radiation had entered the gap between the cooler door and cooler shroud. Cooler outgas continued for seven more days, with the cooler door fully open. The corrective actions had prevented overheating of the cold stage and cold focal plane array (CFPA), which could damage these two components. They also minimized the risk of contamination on the cold stage, which could lead to a thermal short.
A comparative study of two different uncinectomy techniques: swing-door and classical.
Singhania, Ankit A; Bansal, Chetan; Chauhan, Nirali; Soni, Saurav
2012-01-01
The aim of this study was to determine which technique of uncinectomy, classical or swing door technique. Four hundred eighty Cases of sinusitis were selected and operated for Functional Endoscopic Sinus Surgery (FESS). Out of these, in 240 uncinectomies classical uncinectomy was done whereas in another 240 uncinectomies swing door technique was used. Initially patients were medically managed treated according to their symptoms and prior management. Patients who had received previous adequate medical management were evaluated with CT scan of the sinuses. If disease still persists than they were operated for FESS. The authors' experience indicates that Functional endoscopic sinus surgery can be performed under local or general anesthesia, as permitted or tolerated. In this review classical technique was used in 240 uncinectomies. Out of this, ethmoidal complex injury was noted in 4 cases, missed maxillary ostium syndrome (incomplete removal) was reported in 12 patients and orbital fat exposure was encountered in 5 patients. As compared to 240 uncinectomies done with swing door technique, incomplete removal was evident in 2 cases and lacrimal duct injury was reported in 3 cases. 'Evidence that underscores how this 'swing door technique' successfully combines 'the conservation goals of the anterior-to-posterior approach and anatomic virtues of the posterior-to-anterior approach to ethmoidectomy of the total 480 uncinectomies operated. Out of which 240 uncinectomies have been performed using the 'swing-door' technique. The 240 uncinectomies performed using classical technique were used as controls. The incidence of orbital penetration, incomplete removal, ethmoidal complex injury and ostium non-identification was significantly less with the new technique. Three lacrimal injuries occurred with the 'swing-door' technique compared to no injuries with classical technique. The authors recommend swing door technique as it is easy to learn, allows complete removal of the uncinate flush with the lateral nasal wall and allows easy identification of the natural ostium of the maxillary sinus without injuring the ethmoidal complex.
27. WEST FRONT OF NORTH WING OF TECHWOOD DORMITORY, SHOWING ...
27. WEST FRONT OF NORTH WING OF TECHWOOD DORMITORY, SHOWING MAIN ENTRANCE INTO NORTH WING. ORIGINAL DOUBLE DOORS HAVE BEEN REPLACED BY A SINGLE, WIDER DOOR. DOOR IS RECESSED AND HAS AN ELABORATE SURROUND LIKE THAT OF THE MAIN ENTRANCE (WEST FRONT) INTO THE SOUTH WING. THE 'TECHWOOD' LETTERING OVER THE DOORWAY IS UNIQUE TO THIS ENTRANCE OF THE DORMITORY. - Techwood Homes, McDaniel Dormitory, 581-587 Techwood Drive, Atlanta, Fulton County, GA
30 CFR 57.22205 - Doors on main fans (I-A, II-A, III, and V-A mines).
Code of Federal Regulations, 2010 CFR
2010-07-01
... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Doors on main fans (I-A, II-A, III, and V-A... main fans (I-A, II-A, III, and V-A mines). In mines ventilated by multiple main fans, each main fan... reversal through the fan. The doors shall be located so that they are not in direct line with explosive...
Conference room 211, adjacent to commander's quarters, with vault door ...
Conference room 211, adjacent to commander's quarters, with vault door at right. Projection area at center is equipped with automatic security drapes. Projection room uses a 45 degree mirror to reflect the image onto the frosted glass screen. Door on far left leads to display area senior battle staff viewing bridge, and the commander's quarters - March Air Force Base, Strategic Air Command, Combat Operations Center, 5220 Riverside Drive, Moreno Valley, Riverside County, CA
ETR BUILDING, TRA642, INTERIOR. BASEMENT. CAMERA FACES SOUTH AND LOOKS ...
ETR BUILDING, TRA-642, INTERIOR. BASEMENT. CAMERA FACES SOUTH AND LOOKS AT DOOR TO M-3 CUBICLE. CUBICLE WALLS ARE MADE OF LEAD SHIELDING BRICKS. VALVE HANDLES AND STEMS PERTAIN TO SAMPLING. METAL SHIELDING DOOR. NOTE GLOVE BOX TO RIGHT OF CUBICLE DOOR. INL NEGATIVE NO. HD-46-21-3. Mike Crane, Photographer, 2/2005 - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID
28 CFR 36.304 - Removal of barriers.
Code of Federal Regulations, 2014 CFR
2014-07-01
..., providing Brailled and raised character signage, widening doors, providing visual alarms, and installing... doors, installation of ramps, providing accessible signage, widening of toilet stalls, and installation...
28 CFR 36.304 - Removal of barriers.
Code of Federal Regulations, 2010 CFR
2010-07-01
..., providing Brailled and raised character signage, widening doors, providing visual alarms, and installing... doors, installation of ramps, providing accessible signage, widening of toilet stalls, and installation...
28 CFR 36.304 - Removal of barriers.
Code of Federal Regulations, 2013 CFR
2013-07-01
..., providing Brailled and raised character signage, widening doors, providing visual alarms, and installing... doors, installation of ramps, providing accessible signage, widening of toilet stalls, and installation...
28 CFR 36.304 - Removal of barriers.
Code of Federal Regulations, 2012 CFR
2012-07-01
..., providing Brailled and raised character signage, widening doors, providing visual alarms, and installing... doors, installation of ramps, providing accessible signage, widening of toilet stalls, and installation...
28 CFR 36.304 - Removal of barriers.
Code of Federal Regulations, 2011 CFR
2011-07-01
..., providing Brailled and raised character signage, widening doors, providing visual alarms, and installing... doors, installation of ramps, providing accessible signage, widening of toilet stalls, and installation...
NASA Astrophysics Data System (ADS)
Wingert, Bentley M.; Oerlemans, Rick; Camacho, Carlos J.
2018-01-01
The goal of virtual screening is to generate a substantially reduced and enriched subset of compounds from a large virtual chemistry space. Critical in these efforts are methods to properly rank the binding affinity of compounds. Prospective evaluations of ranking strategies in the D3R grand challenges show that for targets with deep pockets the best correlations (Spearman ρ 0.5) were obtained by our submissions that docked compounds to the holo-receptors with the most chemically similar ligand. On the other hand, for targets with open pockets using multiple receptor structures is not a good strategy. Instead, docking to a single optimal receptor led to the best correlations (Spearman ρ 0.5), and overall performs better than any other method. Yet, choosing a suboptimal receptor for crossdocking can significantly undermine the affinity rankings. Our submissions that evaluated the free energy of congeneric compounds were also among the best in the community experiment. Error bars of around 1 kcal/mol are still too large to significantly improve the overall rankings. Collectively, our top of the line predictions show that automated virtual screening with rigid receptors perform better than flexible docking and other more complex methods.
Surflex-Dock: Docking benchmarks and real-world application
NASA Astrophysics Data System (ADS)
Spitzer, Russell; Jain, Ajay N.
2012-06-01
Benchmarks for molecular docking have historically focused on re-docking the cognate ligand of a well-determined protein-ligand complex to measure geometric pose prediction accuracy, and measurement of virtual screening performance has been focused on increasingly large and diverse sets of target protein structures, cognate ligands, and various types of decoy sets. Here, pose prediction is reported on the Astex Diverse set of 85 protein ligand complexes, and virtual screening performance is reported on the DUD set of 40 protein targets. In both cases, prepared structures of targets and ligands were provided by symposium organizers. The re-prepared data sets yielded results not significantly different than previous reports of Surflex-Dock on the two benchmarks. Minor changes to protein coordinates resulting from complex pre-optimization had large effects on observed performance, highlighting the limitations of cognate ligand re-docking for pose prediction assessment. Docking protocols developed for cross-docking, which address protein flexibility and produce discrete families of predicted poses, produced substantially better performance for pose prediction. Performance on virtual screening performance was shown to benefit by employing and combining multiple screening methods: docking, 2D molecular similarity, and 3D molecular similarity. In addition, use of multiple protein conformations significantly improved screening enrichment.
Mukherjee, Sudipto; Rizzo, Robert C.
2014-01-01
Scoring functions are a critically important component of computer-aided screening methods for the identification of lead compounds during early stages of drug discovery. Here, we present a new multi-grid implementation of the footprint similarity (FPS) scoring function that was recently developed in our laboratory which has proven useful for identification of compounds which bind to a protein on a per-residue basis in a way that resembles a known reference. The grid-based FPS method is much faster than its Cartesian-space counterpart which makes it computationally tractable for on-the-fly docking, virtual screening, or de novo design. In this work, we establish that: (i) relatively few grids can be used to accurately approximate Cartesian space footprint similarity, (ii) the method yields improved success over the standard DOCK energy function for pose identification across a large test set of experimental co-crystal structures, for crossdocking, and for database enrichment, and (iii) grid-based FPS scoring can be used to tailor construction of new molecules to have specific properties, as demonstrated in a series of test cases targeting the viral protein HIVgp41. The method will be made available in the program DOCK6. PMID:23436713
ForceGen 3D structure and conformer generation: from small lead-like molecules to macrocyclic drugs
NASA Astrophysics Data System (ADS)
Cleves, Ann E.; Jain, Ajay N.
2017-05-01
We introduce the ForceGen method for 3D structure generation and conformer elaboration of drug-like small molecules. ForceGen is novel, avoiding use of distance geometry, molecular templates, or simulation-oriented stochastic sampling. The method is primarily driven by the molecular force field, implemented using an extension of MMFF94s and a partial charge estimator based on electronegativity-equalization. The force field is coupled to algorithms for direct sampling of realistic physical movements made by small molecules. Results are presented on a standard benchmark from the Cambridge Crystallographic Database of 480 drug-like small molecules, including full structure generation from SMILES strings. Reproduction of protein-bound crystallographic ligand poses is demonstrated on four carefully curated data sets: the ConfGen Set (667 ligands), the PINC cross-docking benchmark (1062 ligands), a large set of macrocyclic ligands (182 total with typical ring sizes of 12-23 atoms), and a commonly used benchmark for evaluating macrocycle conformer generation (30 ligands total). Results compare favorably to alternative methods, and performance on macrocyclic compounds approaches that observed on non-macrocycles while yielding a roughly 100-fold speed improvement over alternative MD-based methods with comparable performance.
Gargano, Julia Warner; Wehner, Susan; Reeves, Mathew J
2009-04-01
Previous studies report that women with stroke may experience longer delays in diagnostic workup than men after arriving at the emergency department. We hypothesized that presenting symptom differences could explain these delays. Data were collected on 1922 acute stroke cases who presented to 15 hospitals participating in a statewide stroke registry. We evaluated 2 in-hospital time intervals: emergency department arrival to physician examination ("door-to-doctor") and emergency department arrival to brain imaging ("door-to-image"). We used parametric survival models to estimate time ratios, which represent the ratio of average times comparing women to men, after adjusting for symptom presentation and other confounders. Women were significantly less likely than men to present with any stroke warning sign or suspected stroke (87.5% versus 91.4%) or to report trouble with walking, balance, or dizziness (9.5% versus 13.7%). Difficulty speaking and loss of consciousness were associated with shorter door-to-doctor times. Weakness, facial droop, difficulty speaking, and loss of consciousness were associated with shorter door-to-image times, whereas difficulty with walking/balance was associated with longer door-to-image times. In adjusted analyses, women had 11% longer door-to-doctor intervals (time ratio, 1.11; 95%, CI 1.02 to 1.22) and 15% longer door-to-image intervals (time ratio, 1.15; 95% CI, 1.08 to 1.25) after accounting for presenting symptoms, age, and other confounders. Furthermore, these sex differences remained evident after restricting to patients who arrived within 6 or within 2 hours of symptom onset. Women with acute stroke experienced greater emergency department delays than men, which were not attributable to differences in presenting symptoms, time of arrival, age, or other confounders.
30. VIEW OF ROOM 212 LOOKING SOUTHEAST TOWARDS EXIT DOORS. ...
30. VIEW OF ROOM 212 LOOKING SOUTHEAST TOWARDS EXIT DOORS. EXPOSED MASONRY WALL WITH BRICK DETAILING OVER ARCHED DOORWAY IS UNPAINTED. ORIGINAL USE OF ROOM 212 WAS AS A HAYLOFT; EXTERIOR DOOR WAS USED FOR LOADING HAY. TRUSSWORK AND BEAMS ARE EXPOSED AND UNPAINTED. WALLS HAVE PAINTED WOOD PANELING, CEILING MATERIAL IS EXPOSED WOOD ROOF SHEATHING. - Presidio of San Francisco, Cavalry Stables, Cowles Street, between Lincoln Boulevard & McDowell Street, San Francisco, San Francisco County, CA
FAST CHOPPER BUILDING, TRA665. CAMERA FACING NORTH. NOTE BRICKEDIN WINDOW ...
FAST CHOPPER BUILDING, TRA-665. CAMERA FACING NORTH. NOTE BRICKED-IN WINDOW ON RIGHT SIDE (BELOW PAINTED NUMERALS "665"). SLIDING METAL DOOR ON COVERED RAIL AT UPPER LEVEL. SHELTERED ENTRANCE TO STEEL SHIELDING DOOR. DOOR INTO MTR SERVICE BUILDING, TRA-635, STANDS OPEN. MTR BEHIND CHOPPER BUILDING. INL NEGATIVE NO. HD42-1. Mike Crane, Photographer, 3/2004 - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID
Punkkinen, Henna; Merta, Elina; Teerioja, Nea; Moliis, Katja; Kuvaja, Eveliina
2012-10-01
Waste collection is one of the life cycle phases that influence the environmental sustainability of waste management. Pneumatic waste collection systems represent a new way of arranging waste collection in densely populated urban areas. However, limited information is available on the environmental impacts of this system. In this study, we compare the environmental sustainability of conventional door-to-door waste collection with its hypothetical pneumatic alternative. Furthermore, we analyse whether the size of the hypothetical pneumatic system, or the number of waste fractions included, have an impact on the results. Environmental loads are calculated for a hypothetical pneumatic waste collection system modelled on an existing dense urban area in Helsinki, Finland, and the results are compared to those of the prevailing, container-based, door-to-door waste collection system. The evaluation method used is the life-cycle inventory (LCI). In this study, we report the atmospheric emissions of greenhouse gases (GHG), SO(2) and NO(x). The results indicate that replacing the prevailing system with stationary pneumatic waste collection in an existing urban infrastructure would increase total air emissions. Locally, in the waste collection area, emissions would nonetheless diminish, as collection traffic decreases. While the electricity consumption of the hypothetical pneumatic system and the origin of electricity have a significant bearing on the results, emissions due to manufacturing the system's components prove decisive. Copyright © 2012 Elsevier Ltd. All rights reserved.
Sadrizadeh, Sasan; Pantelic, Jovan; Sherman, Max; Clark, Jordan; Abouali, Omid
2018-03-08
Operating rooms (ORs) are usually over-pressurized in order to prevent the penetration of contaminated air and the consequent risk of surgical site infection. However, a door-opening can result in the rapid disappearance of pressure and contaminants can then easily penetrate into the surgical zone. Therefore, a broad knowledge and understanding of OR ventilation systems and their protective potential is essential for optimizing the surgical environment. This study investigated the air quality and level of airborne particles during a single and multiple door-opening cycles in an operating room supplied by a turbulent-mixing ventilation system. The exploration was carried out numerically using computational fluid dynamics. Model validation was performed to ensure the validity of the achieved results. The OR was initially over-pressurized by approximately 15Pa, relative to the adjacent corridors. Both sliding and hinged doors were simulated and compared. Penetration of bacteria carrying particles from the corridors to the OR can be successfully restricted by using a positive-pressure system. However, the results clearly indicate that frequent door opening can interfere with airflow ventilation systems, alter the pressure gradient, and increase the infection risk for the patient undergoing surgical intervention. Door-opening disturbs the airflow field and could result in containment failure. Copyright © 2018 The Authors. Published by Elsevier Ltd.. All rights reserved.
... room on the lowest level away from corners, windows, doors and outside walls. The safest locations to ... your family and pets inside. Lock doors, close windows, air vents and fireplace dampers. Turn off fans, ...
Scott Brothers Windows and Doors Information Sheet
Scott Brothers Windows and Doors (the Company) is located in Bridgeville, Pennsylvania. The settlement involves renovation activities conducted at property constructed prior to 1978, located in Pittsburgh, Pennsylvania.
Test and analysis of a stitched RFI graphite-epoxy panel with a fuel access door
NASA Technical Reports Server (NTRS)
Jegley, Dawn C.; Waters, W. Allen, Jr.
1994-01-01
A stitched RFI graphite-epoxy panel with a fuel access door was analyzed using a finite element analysis and loaded to failure in compression. The panel was initially 56-inches long and 36.75-inches wide and the oval access door was 18-inches long and 15-inches wide. The panel was impact damaged with impact energy of 100 ft-lb prior to compressive loading; however, no impact damage was detectable visually or by A-scan. The panel carried a failure load of 695,000 Ib and global failure strain of .00494 in/in. Analysis indicated the panel would fail due to collapse at a load of 688,100 Ib. The test data indicate that the maximum strain in a region near the access door was .0096 in/in and analysis indicates a local surface strain of .010 in/in at the panel's failure load. The panel did not fail through the impact damage, but instead failed through bolt holes for attachment of the access door in a region of high strain.
ERIC Educational Resources Information Center
Lombardi, John
1972-01-01
The financial crisis currently being experienced in community colleges is forcing the imposition of fees and tuition and thereby changing the basic philosophy of community colleges as open door" institutions. (NF)
CAM controlled retractable door latch
NASA Technical Reports Server (NTRS)
Carsley, R. B. (Inventor)
1982-01-01
A latching mechanism in which there is linear movement and rotational movement is described. The umbilical doors of the space shuttle orbiter are required to be open during vehicle launch. After the external tank is released, the doors are closed. Presently, the device for maintaining the doors in an open position is mounted on the external tank and therefore has a single mission life. The latching mechanism of the invention is mounted in the orbiter and therefore is returned and has multimission capability. The latching mechanism is comprised of a pair of concentric nested, cylindrical cams and motors to actuate the cams, and latch pin all contained within a cover mounted on a support bracket carried by the substructure. A shaft having a latch pin is mounted inside the inner cylindrical cam.
Behavior of a nuclear steel containment equipment hatch at large strain
DOE Office of Scientific and Technical Information (OSTI.GOV)
Fanous, F.; Greimann, L.
1988-05-01
During a severe accident, buckling of a steel containment hatch door, large deformation and ovaling of the hatch sleeve are potential causes of mismatch at the sealing surface which can result in a leakage path. A three-dimensional nonlinear finite element analysis of a typical steel containment/sleeve/hatch assembly that includes containment stiffeners, pretensioned swing bolts, and hatch door geometric imperfection is presented. The analysis was carried out to the nonlinear range up to large strains. The results indicated that the buckling load occurs at pressure, far above that which causes gross yielding of the shell plate. Although buckling of the hatchmore » door increased the relative motions of the hatch sleeve and the hatch door, the motions remained sufficiently small to prevent leakage.« less
Effects of subliminal affective priming on helping behavior using the foot-in-the-door technique.
Skandrani-Marzouki, Inès; Marzouki, Yousri; Joule, Robert-Vincent
2012-12-01
Two experiments examined the effect of subliminal affective priming on compliance using the foot-in-the-door (FITD) paradigm. Prior to the target request, participants were exposed to subliminal emotional expressions. FITD (presence vs. absence of initial request) was crossed with Priming (positive, negative, neutral, and absence of prime-blank screen) in a between-subjects design. 180 students volunteered as participants (M=22 years). 20 participants (10 females) were assigned to each of eight experimental conditions plus the control condition that neither involved the initial request nor the priming experiment. Participants were asked to judge whether target sentences were relevant or not for road safety instruction. In Experiment 1, emotional valence of prime stimuli affected both endorsement rate and time devoted to the target request but not participants' attitude. Affective priming effects did not interact significantly with the FITD effect. In experiment 2, in 180 more students, the attitude measure was replaced by an implicit recognition task. Results showed that regardless of priming condition, in the absence of FITD, participants recognized target sentences better than in the presence of FITD. Conversely, in the presence of the FITD, participants recognized more accurately previously seen sentences that were primed by positive emotions relative to other priming conditions. The latter result suggests that the presence of the FITD involves a significant amount of cognitive resources so that only stimuli emotionally relevant to the task's goal (i.e., positive) tend to be processed. Together, these results could explain how, contrary to helping behavior, compliant behavior that has no direct association with the prime stimuli was not easily influenced by the affective subliminal priming.
Modeling an enhanced ridesharing system with meet points and time windows
Li, Xin; Hu, Sangen; Deng, Kai
2018-01-01
With the rising of e-hailing services in urban areas, ride sharing is becoming a common mode of transportation. This paper presents a mathematical model to design an enhanced ridesharing system with meet points and users’ preferable time windows. The introduction of meet points allows ridesharing operators to trade off the benefits of saving en-route delays and the cost of additional walking for some passengers to be collectively picked up or dropped off. This extension to the traditional door-to-door ridesharing problem brings more operation flexibility in urban areas (where potential requests may be densely distributed in neighborhood), and thus could achieve better system performance in terms of reducing the total travel time and increasing the served passengers. We design and implement a Tabu-based meta-heuristic algorithm to solve the proposed mixed integer linear program (MILP). To evaluate the validation and effectiveness of the proposed model and solution algorithm, several scenarios are designed and also resolved to optimality by CPLEX. Results demonstrate that (i) detailed route plan associated with passenger assignment to meet points can be obtained with en-route delay savings; (ii) as compared to CPLEX, the meta-heuristic algorithm bears the advantage of higher computation efficiency and produces good quality solutions with 8%~15% difference from the global optima; and (iii) introducing meet points to ridesharing system saves the total travel time by 2.7%-3.8% for small-scale ridesharing systems. More benefits are expected for ridesharing systems with large size of fleet. This study provides a new tool to efficiently operate the ridesharing system, particularly when the ride sharing vehicles are in short supply during peak hours. Traffic congestion mitigation will also be expected. PMID:29715302
Peels, Hans O; de Swart, Hans; Ploeg, Tjeerd V D; Hautvast, Raymond W; Cornel, Jan H; Arnold, Alf E; Wharton, Thomas P; Umans, Victor A
2007-11-01
We investigated whether primary percutaneous coronary intervention (PCI) for patients admitted with an acute ST-segment elevation myocardial infarction could be performed more rapidly and with comparable outcomes in a community hospital versus a tertiary center with cardiac surgery. We started the first PCI with an off-site surgery program in The Netherlands in 2002 and report the results of 439 consecutive patients. In the safety phase, 199 patients presenting with ST-segment elevation myocardial infarction were randomly assigned to treatment at our off-site center versus a more distant cardiac surgery center. In the confirmation phase, 240 consecutive patients were treated in the off-site hospital. Safety and efficacy end points were the rate of an angiographically successful PCI procedure (diameter stenosis <50% and Thrombolysis In Myocardial Infarction grade 3 flow) in the absence of major adverse cardiac and cerebrovascular events at 30 days. The randomization phase showed a 37-minute decrease in door-to-balloon time (p <0.001) with comparable procedural and clinical successes (91% Thrombolysis In Myocardial Infarction grade 3 flow in the 2 groups). In the confirmation phase, the 30-day rate without major adverse cardiac and cerebrovascular events was 95%. None of the 439 patients in the study required emergency surgery for failed primary PCI. In conclusion, time to treatment with primary PCI can be significantly shortened when treating patients in a community hospital setting with off-site cardiac surgery backup compared with transport for PCI to a referral center with on-site surgery. PCI at hospitals with off-site cardiac surgery backup can be considered a needed strategy to improve access to primary PCI for a larger segment of the population and can be delivered with a very favorable safety profile.
Ntuku, Henry Maggi; Ruckstuhl, Laura; Julo-Réminiac, Jean-Emmanuel; Umesumbu, Solange E; Bokota, Alain; Tshefu, Antoinette Kitoto; Lengeler, Christian
2017-01-09
Long-lasting insecticidal nets (LLIN) are a highly effective means for preventing malaria infection and reducing associated morbidity and mortality. Mass free distribution campaigns have been shown to rapidly increase LLIN ownership and use. Around 3.5 million LLINs were distributed free of charge in the Kasaï Occidental Province in the Democratic Republic of Congo (DRC) in September-October 2014, using two different approaches, a fixed delivery strategy and a door-to-door strategy including hang-up activities. Repeated community-based cross-sectional surveys were conducted 2 months before and six months after the mass distribution. Descriptive statistics were used to measure changes in key malaria household indicators. LLIN ownership and use were compared between delivery strategies. Univariate and multivariate logistic regression analyses were used to identify factors associated with LLIN use before and after the mass distribution. A comparative financial cost analysis between the fixed delivery and door-to-door distribution strategies was carried out from the provider's perspective. Household ownership of at least one LLIN increased from 39.4% pre-campaign to 91.4% post-campaign and LLIN universal coverage, measured as the proportion of households with at least one LLIN for every two people increased from 4.1 to 41.1%. Population access to LLIN within the household increased from 22.2 to 80.7%, while overall LLIN use increased from 18.0 to 68.3%. Higher LLIN ownership was achieved with the fixed delivery strategy compared with the door-to-door (92.5% [95% CI 90.2-94.4%] versus 85.2% [95% CI 78.5-90.0%]), while distribution strategy did not have a significant impact on LLIN use (69.6% [95% CI 63.1-75.5%] versus 65.7% [95% CI 52.7-76.7%]). Malaria prevalence among children aged 6-59 months was 44.8% post-campaign. Living in a household with sufficient numbers of LLIN to cover all members was the strongest determinant of LLIN use. The total financial cost per LLIN distributed was 6.58 USD for the fixed distribution strategy and 6.61 USD for the door-to-door strategy. The mass distribution campaign was effective for rapidly increasing LLIN ownership and use. These gains need to be sustained for long-term reduction in malaria burden. The fixed delivery strategy achieved a higher LLIN coverage at lower delivery cost compared with the door-to-door strategy and seems to be a better distribution strategy in the context of the present study setting.
Code of Federal Regulations, 2010 CFR
2010-01-01
... passenger doors and for preventing their opening in flight inadvertently or as a result of mechanical... specified in paragraph (d) of this section, acting separately relative to the surrounding structure. (2) The...
Code of Federal Regulations, 2013 CFR
2013-01-01
... passenger doors and for preventing their opening in flight inadvertently or as a result of mechanical... specified in paragraph (d) of this section, acting separately relative to the surrounding structure. (2) The...
Marguerite Arnet Residence, exterior door detail, looking north. Adam ...
Marguerite Arnet Residence, exterior door detail, looking north. - Adam & Bessie Arnet Homestead, Marguerite Arnet Residence, 560 feet northeast of Adam & Bessie Arnet Residence, Model, Las Animas County, CO
INTERIOR VIEW OF ENTRANCE TO LABORATORY, SHOWING HANDHAMMERED ALUMINUM DOORS ...
INTERIOR VIEW OF ENTRANCE TO LABORATORY, SHOWING HAND-HAMMERED ALUMINUM DOORS AND MARBLE. NOTE ALUMINUM LIGHT FIXTURE - Alcoa Research Laboratory, Freeport Road, New Kensington, Westmoreland County, PA
Interior detail of basement door, woodenlouvered transom and glass doorknob, ...
Interior detail of basement door, wooden-louvered transom and glass doorknob, facing southeast. - Gorgas Hospital, Administration & Clinics Building, Culebra Road, Balboa Heights, Former Panama Canal Zone, CZ
DETAIL VIEW, SOUTH PORTICO, CENTER DOOR OPENING CONTAINING FRENCH WINDOWS. ...
DETAIL VIEW, SOUTH PORTICO, CENTER DOOR OPENING CONTAINING FRENCH WINDOWS. (NOTE THE INCISED STUCCO MIMICKING ASHLAR STONE COURSING - The Woodlands, 4000 Woodlands Avenue, Philadelphia, Philadelphia County, PA
Helicopter door and window jettison mechanisms for underwater escape: ergonomic confusion!
Brooks, C J; Bohemier, A P
1997-09-01
There are 23 different door, hatch, and window release mechanisms identified in 35 types of helicopters that earn their living over water. There is no standardization of the mechanism within each cockpit or among helicopter types, nor is there any standardization of the location relative to the operation; whether the mechanism matches the task or in which direction the door/hatch/window is jettisoned. New regulations are needed by military and civilian authorities to address the ergonomic confusion.
40. BUILDING NO. 454, ORDNANCE FACILITY (BAG CHANGE FILLING PLANT), ...
40. BUILDING NO. 454, ORDNANCE FACILITY (BAG CHANGE FILLING PLANT), DETAIL SOUTHEAST SIDE OF EXTERIOR ELECTRICAL EQUIPMENT ROOM, SHOWING DOOR TO SEWING ROOM NO. 3, VENTILATOR FAN (OVER DOOR), STEAM LINE (PIPE), SEWING MACHINE MOTOR IN OVERHEAD, ALARM BELL, EXPLOSION-PROOF SWITCH BOXES, GROUNDS ON DOORS, PULL ALARM HANDLE (EXTREME RIGHT; PULLEY CABLE CONDUCTED IN CONDUIT TO SWITCH INSIDE BUILDING. PULLEYS INSIDE ALL ELBOW JOINTS.) - Picatinny Arsenal, 400 Area, Gun Bag Loading District, State Route 15 near I-80, Dover, Morris County, NJ
2015-05-01
An Open Door and a Leg Up : Increasing Service-Disabled Veteran-Owned Small Business (SDVOSB) Participation in Defense Contracting Through...to 00-00-2015 4. TITLE AND SUBTITLE An Open Door and a Leg Up : Increasing Service-Disabled Veteran-Owned Small Business (SDVOSB) Participation in...4/1999 Rejection of Access to 8(a) Program in HR 1460 Veterans Entrepreneurship and Benefits Improvement Act of 2003 6/5/2003 Unutilized
Sleeping porch through french doors off master bedroom (southern unit) ...
Sleeping porch through french doors off master bedroom (southern unit) - Fitzsimons General Hospital, Officers' Quarters, West Charlie Kelly Boulevard & South Hutton Street, Southwest Corner, Aurora, Adams County, CO
40 CFR 60.36e - Inspection guidelines.
Code of Federal Regulations, 2011 CFR
2011-07-01
...; (v) Inspect HMIWI door and door gaskets for proper sealing; (vi) Inspect motors for proper operation... applicable; (xiv) Inspect waste heat boiler systems to ensure proper operation, if applicable; (xv) Inspect...
Code of Federal Regulations, 2010 CFR
2010-10-01
... superstructures shall be fitted with doors of steel or other equivalent material, permanently and strongly attached to the bulkhead, and framed, stiffened and fitted so that the whole structure is of equivalent...
Code of Federal Regulations, 2011 CFR
2011-10-01
... superstructures shall be fitted with doors of steel or other equivalent material, permanently and strongly attached to the bulkhead, and framed, stiffened and fitted so that the whole structure is of equivalent...
Code of Federal Regulations, 2010 CFR
2010-04-01
... directly to the out-of-doors. The minimum total window or skylight area, including windows in doors, shall... percent of the minimum window or skylight area required, except where comparably adequate ventilation is...
28. PENTHOUSE, ROOM 3005, LOOKING SOUTHWEST THROUGH DOUBLE DOORS. NORTH ...
28. PENTHOUSE, ROOM 3005, LOOKING SOUTHWEST THROUGH DOUBLE DOORS. NORTH SIDE OF BUILDING. - Hughes Aircraft Company, Processing & Electronics Building, 6775 Centinela Avenue, Los Angeles, Los Angeles County, CA
Code of Federal Regulations, 2013 CFR
2013-10-01
... superstructures shall be fitted with doors of steel or other equivalent material, permanently and strongly attached to the bulkhead, and framed, stiffened and fitted so that the whole structure is of equivalent...
Code of Federal Regulations, 2014 CFR
2014-10-01
... superstructures shall be fitted with doors of steel or other equivalent material, permanently and strongly attached to the bulkhead, and framed, stiffened and fitted so that the whole structure is of equivalent...
Code of Federal Regulations, 2012 CFR
2012-10-01
... superstructures shall be fitted with doors of steel or other equivalent material, permanently and strongly attached to the bulkhead, and framed, stiffened and fitted so that the whole structure is of equivalent...
INTERIOR, NORTH ROOM WITH CENTRAL DOOR TO EXTERIOR; VIEW TO ...
INTERIOR, NORTH ROOM WITH CENTRAL DOOR TO EXTERIOR; VIEW TO NORTHEAST - Fort Bragg, Noncommissioned Officers' Service Club, Guest House Building, South of Butner Road, Fayetteville, Cumberland County, NC
Tencer, Allan F; Kaufman, Robert; Mack, Christopher; Mock, Charles
2005-03-01
The goal of this study was to identify variables related to vehicle design which are associated with pelvic and thoracic accelerations as measured by the driver's (near side) crash dummy during new car assessment program (NCAP) testing of motor vehicles. Vehicle specific parameters were analyzed using NCAP side impact test results. Data from national automotive sampling system, crashworthiness data system (NASS-CDS) and crash injury research and engineering network (CIREN) (both National Highway Traffic Safety Administration (NHTSA) injury databases) were assessed to confirm NCAP test observations. In addition, door armrest stiffness measurements were performed using a mechanical tester on a sample of 40 vehicles. NCAP data showed that of 10 variables tested using multiple linear regression, vehicle weight and door crush correlated with pelvic acceleration of the driver's crash dummy (overall, r2=0.58, p=0.002, n=165). For thoracic trauma index (TTI) vehicle weight and peak door velocity correlated, significantly (overall, r2=0.41, p=0.03, n=165). Mean TTI was 63.7 g with no side airbag (n=108) and 55.6 g with a thoracic side airbag (n=54), p=0.01. The mean vehicle weight and door crush between airbag and no airbag groups were not significantly different. NASS-CDS data demonstrated a direct relationship between increased door crush and increased abbreviated injury score (AIS). CIREN data showed that occupants who sustained pelvic injuries had a median AIS of 3 with 24.9 cm of door crush, with abdominal injuries, a median AIS of 3 and 30 cm of crush, and with thoracic injuries, a median AIS of 4 and 34 cm of door crush. In addition, the frequency of bilateral pelvic injuries was significantly higher for subjects in CIREN crashes who were in a vehicle with a center console, but only if door intrusion was greater than 15 cm. This information may be useful in design of vehicles with greater protection in side impact crashes.
Haglund, K; von Knorring, L; von Essen, L
2006-04-01
To describe nurses' and mental health nurse assistants' perceptions of advantages and disadvantages about working on a psychiatric ward with a locked entrance door. Psychiatric staff sometimes needs to protect patients from harming themselves or others. To keep the entrance door locked may help staff to achieve this goal. How locked entrance doors at psychiatric wards are experienced by staff, working on these wards, has been investigated to a very limited extent. The study was explorative and descriptive. Audio taped, semi-structured interviews with open-ended questions about advantages and disadvantages about working on a psychiatric ward with a locked entrance door, were conducted with 20 nurses and 20 mental health nurse assistants. Data were analyzed with content analysis. A content analysis revealed eight categories of advantages and 18 categories of disadvantages. Most advantages mentioned by nurses and mental health nurse assistants were categorized as providing staff with control over patients, providing patients with a secure and efficient care and protecting patients and staff against 'the outside'. Most disadvantages mentioned by nurses were categorized as causing extra work for staff, making patients feel confined, making patients feel dependent and creating a non-caring environment. Most disadvantages mentioned by mental health nurse assistants were categorized as causing extra work for staff, making patients feel confined, causing emotional problems for patients, making staff's power obvious and forcing patients to adapt to other patients' needs. Nurses and mental health nurse assistants mentioned more disadvantages than advantages and nurses mentioned more disadvantages than mental health nurse assistants. Nurses and mental health nurse assistants perceive a number of advantages and disadvantages for themselves, patients and significant others with a locked door at a psychiatric ward. Most of these concern patients' experiences. It is important for staff working within psychiatric care to reflect upon the fact that a locked entrance door is connected with a range of negative as well as positive perceptions and to minimize patient and own concerns connected to the locked door.
Detail view of door surround, note bracket & ghost of ...
Detail view of door surround, note bracket & ghost of (former) arched opening in the brickwork beside it - Leonard Mackall House, 1686 Thirty-Fourth Street, Northwest, Washington, District of Columbia, DC
Door in west wall of the center block, positioned near ...
Door in west wall of the center block, positioned near the detached kitchen/bake house building. - Lazaretto Quarantine Station, Wanamaker Avenue and East Second Street, Essington, Delaware County, PA
9. Front door, central hall interior view, cross and open ...
9. Front door, central hall interior view, cross and open bible configuration, with transom and sidelights, facing south. - Landers-Cain House, 915 Pleasant Hill Road, Lawrenceville, Gwinnett County, GA
INTERIOR DETAIL, TWO TOILET STALLS, SHOWING ROUGHCUT DOORS; VIEW TO ...
INTERIOR DETAIL, TWO TOILET STALLS, SHOWING ROUGH-CUT DOORS; VIEW TO NORTH - Fort Bragg, Noncommissioned Officers' Service Club, Guest House Building, South of Butner Road, Fayetteville, Cumberland County, NC
4. MESS HALL, FRONT DETAIL OVER DOOR, LOOKING EAST. ...
4. MESS HALL, FRONT DETAIL OVER DOOR, LOOKING EAST. - NIKE Missile Base C-84, Mess Hall, North of Launch Area Entrance Drive, east of Officers' Quarters & Administration Building, Barrington, Cook County, IL
12. ELEVATOR DOORS AND CAB. Hot Springs National Park, ...
12. ELEVATOR DOORS AND CAB. - Hot Springs National Park, Bathhouse Row, Fordyce Bathhouse: Mechanical & Piping Systems, State Highway 7, 1 mile north of U.S. Highway 70, Hot Springs, Garland County, AR
EXTERIOR VIEW, BEE HIVE COKE OVEN DOOR. Pratt Coal ...
EXTERIOR VIEW, BEE HIVE COKE OVEN DOOR. - Pratt Coal & Coke Company, Pratt Mines, Coke Ovens & Railroad, Bounded by First Street, Avenue G, Third Place, Birmingham Southern Railroad, Birmingham, Jefferson County, AL
5. Command center doors at command center entry, building 501, ...
5. Command center doors at command center entry, building 501, looking north - Offutt Air Force Base, Strategic Air Command Headquarters & Command Center, Command Center, 901 SAC Boulevard, Bellevue, Sarpy County, NE
Interior view of addition pharmacy showing dutch door and security ...
Interior view of addition pharmacy showing dutch door and security ceiling grate, facing north. - Albrook Air Force Station, Dispensary, East side of Canfield Avenue, Balboa, Former Panama Canal Zone, CZ
Detail, east side, north end, showing door and overhead rail ...
Detail, east side, north end, showing door and overhead rail for refrigeration room. - Fitzsimons General Hospital, Ice Plant, Southwest Corner of East I Avenue & North Thirteenth Street, Aurora, Adams County, CO
Detail of main doors on east elevation; camera facing west. ...
Detail of main doors on east elevation; camera facing west. - Mare Island Naval Shipyard, Hospital Headquarters, Johnson Lane, west side at intersection of Johnson Lane & Cossey Street, Vallejo, Solano County, CA
31. DETAIL OF OVERHEAD TENSIONER DEVICE LOCATED ABOVE SOUTHERN DOOR ...
31. DETAIL OF OVERHEAD TENSIONER DEVICE LOCATED ABOVE SOUTHERN DOOR OF BUILDING 1. - Chollas Heights Naval Radio Transmitting Facility, Transmitter Building, 6410 Zero Road, San Diego, San Diego County, CA
122. BENCH SHOP, SOUTHWEST CORNER SHOWING WOOD BORING MACHINE. DOOR ...
122. BENCH SHOP, SOUTHWEST CORNER SHOWING WOOD BORING MACHINE. DOOR TO WOODSHOP ON RIGHT. - Gruber Wagon Works, Pennsylvania Route 183 & State Hill Road at Red Bridge Park, Bernville, Berks County, PA
Code of Federal Regulations, 2010 CFR
2010-01-01
... considered as buoyancy volume. (e) Unless the effects of the collapse of external doors and windows are... prescribed in paragraphs (c) and (d) of this section), the external doors and windows must be designed to...
46 CFR 78.17-3 - Watertight doors.
Code of Federal Regulations, 2014 CFR
2014-10-01
... doors in subdivision bulkheads that may be opened at sea, and all mechanisms, remote controls, and... navigated to be assured that they are in proper operating condition. On vessels in which the voyage exceeds...
46 CFR 78.17-3 - Watertight doors.
Code of Federal Regulations, 2010 CFR
2010-10-01
... doors in subdivision bulkheads that may be opened at sea, and all mechanisms, remote controls, and... navigated to be assured that they are in proper operating condition. On vessels in which the voyage exceeds...
46 CFR 78.17-3 - Watertight doors.
Code of Federal Regulations, 2011 CFR
2011-10-01
... doors in subdivision bulkheads that may be opened at sea, and all mechanisms, remote controls, and... navigated to be assured that they are in proper operating condition. On vessels in which the voyage exceeds...
46 CFR 78.17-3 - Watertight doors.
Code of Federal Regulations, 2013 CFR
2013-10-01
... doors in subdivision bulkheads that may be opened at sea, and all mechanisms, remote controls, and... navigated to be assured that they are in proper operating condition. On vessels in which the voyage exceeds...
46 CFR 78.17-3 - Watertight doors.
Code of Federal Regulations, 2012 CFR
2012-10-01
... doors in subdivision bulkheads that may be opened at sea, and all mechanisms, remote controls, and... navigated to be assured that they are in proper operating condition. On vessels in which the voyage exceeds...
Detail of large industrial doors on north elevation; camera facing ...
Detail of large industrial doors on north elevation; camera facing south. - Mare Island Naval Shipyard, Defense Electronics Equipment Operating Center, I Street, terminus west of Cedar Avenue, Vallejo, Solano County, CA
Code of Federal Regulations, 2011 CFR
2011-07-01
..., completely enclosed, with a roof and walls which may have windows and door(s). Claimant means a person who.... Shelter means a structure designed to provide temporary relief from the elements and is characterized as a...
DETAIL OF SLIDING DOORS ON EAST (REAR) ELEVATION OF BUILDING. ...
DETAIL OF SLIDING DOORS ON EAST (REAR) ELEVATION OF BUILDING. VIEW TO SOUTHWEST. - Plattsburgh Air Force Base, Conventional Munitions Shop, Off Perimeter Road in Weapons Storage Area, Plattsburgh, Clinton County, NY
7. BLOCK HOUSE BASEMENT LOOKING THROUGH DOOR INTO CABLE TUNNEL ...
7. BLOCK HOUSE BASEMENT LOOKING THROUGH DOOR INTO CABLE TUNNEL RUNNING BETWEEN BLOCK HOUSE AND STATIC TEST TOWER. - Marshall Space Flight Center, East Test Area, Block House, Huntsville, Madison County, AL
Overhead Door Company of Charleston Information Sheet
Overhead Door Company of Charleston (the Company) is located in North Charleston, South Carolina. The settlement involves renovation activities conducted at a property constructed prior to 1978, located in Isle of Palms, South Carolina.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Wagner, J.; Sullivan, D.P.; Faulkner, D.
The purpose of this study is to quantify the effect ofvarious design and operating parameters on smoking room performance.Twenty-eight experiments were conducted in a simulated smoking room witha smoking machine and an automatic door opener. Measurements were made ofair flows, pressures, temperatures, two particle-phase ETS tracers, twogas-phase ETS tracers, and sulfur hexafluoride. Quantification of leakageflows, the effect of these leaks on smoking room performance andnon-smoker exposure, and the relative importance of each leakagemechanism are presented. The results indicate that the first priority foran effective smoking room is to depressurize it with respect to adjoiningnon-smoking areas. Another important ETS leakage mechanismmore » is the pumpingaction of the smoking room door. Substituting a sliding door for astandard swing-type door reduced this source of ETS leakagesignificantly. Measured results correlated well with model predictions(R2 = 0.82-0.99).« less
Flight service evaluation of composite components on the Bell helicopter model 206L
NASA Technical Reports Server (NTRS)
Wilson, Henry
1993-01-01
This is the final report on the advanced composite components which were placed in service on the 206L LongRanger helicopters in the continental United States, Canada, and Alaska. This report covers all test data which was gathered, as well as maintenance histories of the parts. The previous reports describe the fabrication, service experiences, and test data through 1986. This report contains information from these references, as well as data gathered after 1986. The status of the 40 sets of components is discussed. Each set consisted of a vertical fin, forward fairing, litter door, and baggage door. Almost 500,000 flight hours were accumulated on the 160 parts, with the high-time part accumulating 14,687 flight hours. Over 60 percent of the parts were destructively tested to measure strength and stiffness retention over the course of the program. The vertical fins had the greatest strength retention followed by the litter doors. The baggage doors had the poorest retention of strength. There was very little difference in property retention between the four primary operating regions: Northwest U.S., Southwest U.S., Gulf of Mexico Coastal Region, and the Northeast U.S. and Eastern Canada Region. The field problems have ranged from two lightning-struck fins to significant delaminations in the baggage doors. There was only one environmentally related field incident, in which the glass windows on the litter doors were found to loosen due to high temperatures experienced in the southwest region.
Open cycle ocean thermal energy conversion steam control and bypass system
Wittig, J. Michael; Jennings, Stephen J.
1980-01-01
Two sets of hinged control doors for regulating motive steam flow from an evaporator to a condenser alternatively through a set of turbine blades in a steam bypass around the turbine blades. The evaporator has a toroidal shaped casing situated about the turbine's vertical axis of rotation and an outlet opening therein for discharging motive steam into an annular steam flow path defined between the turbine's radially inner and outer casing structures. The turbine blades extend across the steam flow path intermediate the evaporator and condenser. The first set of control doors is arranged to prevent steam access to the upstream side of the turbine blades and the second set of control doors acts as a bypass around the blades so as to maintain equilibrium between the evaporator and condenser during non-rotation of the turbine. The first set of control doors preferably extend, when closed, between the evaporator casing and the turbine's outer casing and, when open, extend away from the axis of rotation. The second set of control doors preferably constitute a portion of the turbine's outer casing downstream from the blades when closed and extend, when open, toward the axis of rotation. The first and second sets of control doors are normally held in the open and closed positions respectively by locking pins which may be retracted upon detecting an abnormal operating condition respectively to permit their closing and opening and provide steam flow from the evaporator to the condenser.
Diffraction Effects in the SOFIA Telescope and Cavity Door
NASA Astrophysics Data System (ADS)
Erickson, E. F.; Haas, M. R.; Davis, P. K.
2005-12-01
Calculations of diffraction phenomena for SOFIA (the Stratospheric Observatory for Infrared Astronomy) are described. The analyses establish the diffraction-limited point-spread function for the planned central obscuration of the telescope, confirm the specification for the oversized primary mirror diameter, evaluate spider diffraction effects, and determine the variation in focal-plane flux with position of the telescope relative to the cavity door. The latter is a concern because motion between the door aperture and the telescope can vary the flux from a point source and the sky background by diffraction (even when the door aperture does not physically obstruct the geometrical beam). We find all these effects to be acceptable in terms of observatory performance, with the possible exception of fractional background variations 3E-3 at wavelengths 1mm. Fractional background variations larger than 1E-6 can exceed photon shot noise in one second for broad-band, background-limited infrared detectors systems. However, we expect that synchronous signal demodulation using the telescope's chopping secondary mirror will obviate this effect, assuming modulation of the diffracted sky radiation by the relative motion of the door and telescope occurs at frequencies well below the chopoper frequency. This work is supported by the National Aeronautics and Space Administration.
Matthys, Walter; van Goozen, Stephanie H M; Snoek, Heddeke; van Engeland, Herman
2004-12-01
Response perseveration is the tendency to continue a response set for reward despite punishment. In the present study, response perseveration and sensitivity to reward and punishment were assessed in boys with oppositional defiant disorder (ODD). The study also examined the relation between punishment sensitivity and autonomic arousal. Nineteen ODD boys (mean age 9.8 years) and 20 normal control boys (NC) (mean age 9.7 years) were administered the door-opening task. In this task, the subject chooses either to open the next door or to stop playing; the opening of doors is initially rewarded and then increasingly punished. ODD boys opened more doors than NC boys. Following punishment, ODD boys took less time than NC boys before opening the next door, but did not differ from NC boys in time after reward. Mean skin conductance level was lower in ODD boys than in NC boys. The correlation coefficient between time after punishment and skin conductance level was moderately positive in the total sample. These results suggest that response perseveration in ODD boys is related to low punishment sensitivity and that skin conductance level is a marker of punishment sensitivity.
DoOR 2.0 - Comprehensive Mapping of Drosophila melanogaster Odorant Responses
NASA Astrophysics Data System (ADS)
Münch, Daniel; Galizia, C. Giovanni
2016-02-01
Odors elicit complex patterns of activated olfactory sensory neurons. Knowing the complete olfactome, i.e. the responses in all sensory neurons for all relevant odorants, is desirable to understand olfactory coding. The DoOR project combines all available Drosophila odorant response data into a single consensus response matrix. Since its first release many studies were published: receptors were deorphanized and several response profiles were expanded. In this study, we add unpublished data to the odor-response profiles for four odorant receptors (Or10a, Or42b, Or47b, Or56a). We deorphanize Or69a, showing a broad response spectrum with the best ligands including 3-hydroxyhexanoate, alpha-terpineol, 3-octanol and linalool. We include all of these datasets into DoOR, provide a comprehensive update of both code and data, and new tools for data analyses and visualizations. The DoOR project has a web interface for quick queries (http://neuro.uni.kn/DoOR), and a downloadable, open source toolbox written in R, including all processed and original datasets. DoOR now gives reliable odorant-responses for nearly all Drosophila olfactory responding units, listing 693 odorants, for a total of 7381 data points.