Tracking the Archean-Proterozoic suture zone in the northeastern Great Basin, Nevada and Utah

USGS Publications Warehouse

Rodriguez, B.D.; Williams, J.M.

2008-01-01

It is important to know whether major mining districts in north-central Nevada are underlain by crust of the Archean Wyoming craton, known to contain major orogenic gold deposits or, alternatively, by accreted crust of the Paleoproterozoic Mojave province. Determining the location and orientation of the Archean-Proterozoic suture zone between these provinces is also important because it may influence subsequent patterns of sedimentation, deformation, magmatism, and hydrothermal activity. The suture zone is exposed in northeastern Utah and south-western Wyoming and exhibits a southwest strike. In the Great Basin, the suture zone strike is poorly constrained because it is largely concealed below a Neoproterozoic-Paleozoic miogeocline and Cenozoic basin fill. Two-dimensional resistivity modeling of three regional north-south magnetotelluric sounding profiles in western Utah, north-central Nevada, and northeastern Nevada, and one east-west profile in northeastern Nevada, reveals a deeply penetrating (>10 km depth), broad (tens of kilometers) conductor (1-20 ohm-meters) that may be the Archean-Proterozoic suture zone, which formed during Early Proterozoic rifting of the continent and subsequent Proterozoic accretion. This major crustal conductor changes strike direction from southwest in Utah to northwest in eastern Nevada, where it broadens to ???100 km width that correlates with early Paleozoic rifting of the continent. Our results suggest that the major gold belts may be over-isolated blocks of Archean crust, so Phanerozoic mineral deposits in this region may be produced, at least in part, from recycled Archean gold. Future mineral exploration to the east may yield large gold tonnages. ?? 2008 Geological Society of America.

The Proterozoic Mount Isa Fault Zone, northeastern Australia: is it really a ca. 1.9 Ga terrane-bounding suture?

NASA Astrophysics Data System (ADS)

Bierlein, Frank P.; Betts, Peter G.

2004-09-01

In marked contrast to Palaeoproterozoic Laurentia, the location of sutures and boundaries of discrete crustal fragments amalgamated during Palaeoproterozoic formation of the North Australian Craton remain highly speculative. Interpretations of suture locations have relied heavily on the analysis of regional geophysical datasets because of sparse exposure of rocks of the appropriate age. The Mount Isa Fault Zone has been interpreted as one such Palaeoproterozoic terrane-bounding suture. Furthermore, the coincidence of this fault zone with major shale-hosted massive sulphide Pb-Zn-Ag orebodies has led to speculations that trans-lithospheric faults may be an important ingredient for the development of this deposit type. This study has integrated geophysical and geochemical data to test the statute of the Mount Isa Fault as a terrane-bounding suture. Forward modelling of gravity data shows that basement rocks on either side of the Mount Isa Fault have similar densities. These interpretations are consistent with geochemical observations and Sm-Nd data that suggest that basement lithologies on either side of the Mount Isa Fault are geochemically and isotopically indistinguishable from each other, and that the Mount Isa Fault is unlikely to represent a suture zone that separates different Palaeoproterozoic terranes. Our data indicate that the crustal blocks on both sides of the Mount Isa Fault Zone must have been in within close proximity of each other since the Palaeoproterozoic, and that the Western Fold Belt was part of the (ancestral) North Australian Craton well before the ˜1.89-1.87 Ga Barramundi Orogeny. It appears that deep crustal variations in density may be related to the boundary between a shallowly west-dipping high-density mafic to ultramafic plate and low-density basement rocks. This interpretation in turn impacts on crustal-scale models for the development of shale-hosted massive sulphide Pb-Zn mineralisation, which do not require trans-lithospheric faults to tap deep-seated metal reservoirs and/or mantle plumbing systems. The approach applied herein demonstrates the value of multi-disciplinary investigations to the critical assessment of long-lived Proterozoic fault systems which, in the absence of methodical analysis, are commonly assumed to represent terrane-bounding sutures.

Possible detachment zone in Precambrian rocks of Kanjamalai Hills, Cauvery Suture Zone, Southern India: Implications to accretionary tectonics

NASA Astrophysics Data System (ADS)

Mohanty, D. P.; Chetty, T. R. K.

2014-07-01

Existence of a possible detachment zone at Elampillai region, NW margin of Kanjamalai Hills, located in the northern part of Cauvery Suture Zone (CSZ), Southern India, is reported here for the first time. Detailed structural mapping provides anatomy of the zone, which are rarely preserved in Precambrian high grade terranes. The detachment surface separates two distinct rock units of contrasting lithological and structural characters: the upper and lower units. The detachment zone is characterized by a variety of fold styles with the predominance of tight isoclinal folds with varied plunge directions, limb rotations and the hinge line variations often leading to lift-off fold like geometries and deformed sheath folds. Presence of parasitic folding and associated penetrative strains seem to be controlled by differences in mechanical stratigraphy, relative thicknesses of the competent and incompetent units, and the structural relief of the underlying basement. Our present study in conjunction with other available geological, geochemical and geochronological data from the region indicates that the structures of the detachment zone are genetically related to thrust tectonics forming a part of subduction-accretion-collision tectonic history of the Neoproterozoic Gondwana suture.

Paleocene Picrites of Davis Strait: Products of a Plume or Plates?

NASA Astrophysics Data System (ADS)

Beutel, E. K.; Clarke, D. B.

2017-12-01

Voluminous, subaerial, ultra-depleted, 62 Ma, primary picritic lavas occur on both sides of Davis Strait separating Baffin Island and West Greenland. Temporally, the picrites are coeval with the initiation of sea-floor spreading in Labrador Sea and Baffin Bay around 62 Ma. Petrogenetically, the chemical characteristics of these picrites (MgO = 18-21 wt. %; K2O = 0.01-0.20 wt. %; 87Sr/86Sri ≈ 0.7030; ɛNdi ≈ +5.2-8.6; 3He/4He ≤ 49.5RA) demand only derivation by partial melting of highly depleted subcontinental lithospheric mantle (SCLM) at a pressure of 4 GPa, followed by rapid ascent to the surface, but do not necessarily require high temperatures or high degrees of partial melting. Tectonically, these picrites formed in thick Archean and Paleoproterozoic cratonic terranes during Paleogene rifting between Greenland and North America. Structurally, the picrites are related to the major intersection of a NNW suture zone under Baffin Bay and the E-W trending Paleoproterozoic Nagssugtoqidian Fold Belt. During the late Mesozoic, ENE extension created normal faulted basins quasi-parallel with the NNW suture and thinned the mantle lithosphere. Elastic finite element models and present day studies of crustal extension show that the thicker Nagssugtoqidian Fold Belt underwent less thinning and extension than the NNW suture zone in the Archean Rae craton. These extensional disparities occur at the orthogonal intersection of pre-existing E-W trending strike-slip faults in the thicker Nagssugtoqidian Fold Belt with the NNW thinned Archean suture zone, and likely resulted in the formation of one or more pull-apart basins. Because the strike-slip faults are ancient suture zones, trans-tension within these suture zones easily reached 120 km, creating not only decompression melting in the SCLM, but also a pathway for the picritic melts to rapidly reach the surface. Such a purely tectonic model requires no spatially or temporally improbable deep mantle plume for generation of the Paleocene picrites of Davis Strait.

Comparison of geoelectrical/tectonic models for suture zones in the western U.S.A. and eastern Europe: are black shales a possible source of high conductivities?

USGS Publications Warehouse

Stanley, W.D.

1989-01-01

Large-scale geoelectrical anomalies have been mapped with geomagnetic depth sounding (GDS) and magnetotelluric (MT) surveys in the Carpathian Mountains region. These anomalies are associated with the zone of closure between stable Europe and a complex of microplates in front of the converging African plate. The zone of closure, or suture zone, is largely occupied by an extensive deformed flysch belt. The models derived to fit the observed geoelectrical data are useful in the study of other suture zones, and Carpathian structures have been compared with areas currently being studied in the western Cordillera of the U.S.A. Models derived for a smaller-scale suture zone mapped in western Washington State have features that are similar to the Carpathian models. The geoelectrical models for both the Carpathian and Washington anomalies require dipping conductive slabs of 1-5 ?? m material that extends to depths > 20 km. In both instances there is evidence that these materials may merge with lower crustal-mantle conductors along the down-dip margins of the slab. The main conductive units are interpreted to be sedimentary rocks that have been partially subducted due to collisional processes. Heat flow is low in both regions and it is difficult to explain fully the deep conduction mechanisms; however, evidence suggests that the conduction at depth may include electronic conduction in sulfide mineral or carbon films as well as ionic conduction in fluids or partial melt. ?? 1989.

Progressive magmatism and evolution of the Variscan suture in southern Iberia

NASA Astrophysics Data System (ADS)

Braid, James A.; Murphy, J. Brendan; Quesada, Cecilio; Gladney, Evan R.; Dupuis, Nicolle

2018-04-01

Magmatic activity is an integral component of orogenic processes, from arc magmatism during convergence to post-collisional crustal melting. Southern Iberia exposes a Late Paleozoic suture zone within Pangea and where a crustal fragment of Laurussia (South Portuguese Zone) is juxtaposed with parautochthonous Gondwana (Ossa Morena Zone). Fault-bounded oceanic metasedimentary rocks, mélanges and ophiolite complexes characterize the suture zone and are intruded by plutonic rocks and mafic dykes. The generation and emplacement of these intrusive rocks and their relationship to development of the suture zone and the orogen are undetermined. Field evidence combined with U/Pb (zircon) geochronology reveals three main phases of plutonism, a pre-collisional unfoliated gabbroic phase emplaced at ca 354 Ma, crosscut by a syn-tectonic ca 345 Ma foliated granodiorite phase followed by a ca 335 Ma granitic phase. Geochemical analyses (major, trace, rare earth elements) indicate that the gabbro exhibits a calc-alkaline arc signature whereas the granodiorite and granite are typical of post-collisional slab break-off. Taken together, these data demonstrate a protracted development of the orogen and support a complex late stage evolution broadly similar to the tectonics of the modern eastern Mediterranean. In this scenario, the highly oblique closure of a small tract of oceanic lithosphere postdates the main collision event resulting in escape of parautochthonous and allochthonous terranes toward the re-entrant.

Inferring the effects of compositional boundary layers on crystal nucleation, growth textures, and mineral chemistry in natural volcanic tephras through submicron-resolution imaging

NASA Astrophysics Data System (ADS)

Zellmer, Georg; Sakamoto, Naoya; Hwang, Shyh-Lung; Matsuda, Nozomi; Iizuka, Yoshiyuki; Moebis, Anja; Yurimoto, Hisayoshi

2016-09-01

Crystal nucleation and growth are first order processes captured in volcanic rocks and record important information about the rates of magmatic processes and chemical evolution of magmas during their ascent and eruption. We have studied glass-rich andesitic tephras from the Central Plateau of the Southern Taupo Volcanic Zone by electron- and ion-microbeam imaging techniques to investigate down to sub-micrometre scale the potential effects of compositional boundary layers (CBLs) of melt around crystals on the nucleation and growth of mineral phases and the chemistry of crystal growth zones. We find that CBLs may influence the types of mineral phases nucleating and growing, and growth textures such as the development of swallowtails. The chemistry of the CBLs also has the capacity to trigger intermittent overgrowths of nanometre-scale bands of different phases in rapidly growing crystals, resulting in what we refer to as cryptic phase zoning. The existence of cryptic phase zoning has implications for the interpretation of microprobe compositional data, and the resulting inferences made on the conditions of magmatic evolution. Identification of cryptic phase zoning may in future lead to more accurate thermobarometric estimates and thus geospeedometric constraints. In future, a more quantitative characterization of CBL formation and its effects on crystal nucleation and growth may contribute to a better understanding of melt rheology and magma ascent processes at the onset of explosive volcanic eruptions, and will likely be of benefit to hazard mitigation efforts.

Complex Modeling of the Seismic Structure of the Trans-European Suture Zone's Margin from Receiver Function Analysis

NASA Astrophysics Data System (ADS)

Wilde-Piorko, M.; Chrapkiewicz, K.; Lepore, S.; Polkowski, M.; Grad, M.

2016-12-01

The Trans-European Suture Zone (TESZ) is one of the most prominent suture zones in Europe separating the young Paleozoic Platform from the much older Precambrian East European Craton. The data recorded by "13 BB Star" broadband seismic stations (Grad et al., 2015) are analyzed to investigate the crustal and upper mantle structure of the margin of the Trans-European Suture Zone (TESZ) in northern Poland. Receiver function (RF) locally provides the signature of sharp seismic discontinuities and information about the shear wave (S-wave) velocity distribution beneath the seismic station. Recorded seismograms are rotated from ZNE to LQT system with method using the properties of RF (Wilde-Piórko, 2015). Different techniques of receiver function interpretation are applied, including 1-D inversion of RF, 1-D forward modeling of RF, 2.5D forward modeling of RF, 1-D join inversion of RF and dispersion curves of surface wave, to find the best S-wave velocity model of the TESZ margin. A high-resolution 3D P-wave velocity model in the area of Poland (Grad et al. 2016) are used as a starting model. National Science Centre Poland provided financial support for this work by NCN grant DEC-2011/02/A/ST10/00284.

Underplating along the northern portion of the Zagros suture zone, Iran

NASA Astrophysics Data System (ADS)

Motaghi, K.; Shabanian, E.; Kalvandi, F.

2017-07-01

A 2-D absolute shear wave velocity model has been resolved beneath a seismic profile across the northeastern margin of the Arabian Plate-Central Iran by simultaneously inverting data from P receiver functions and fundamental mode Rayleigh wave phase velocity. The data were gathered by a linear seismic array crossing the Zagros fold and thrust belt, Urmia-Dokhtar magmatic arc and Central Iran block assemblage as three major structural components of the Arabia-Eurasia collision. Our model shows a low-velocity tongue protruding from upper to lower crust which, north of the Zagros suture, indicates the signature of an intracontinent low-strength shear zone between the underthrusting and overriding continents. The velocity model confirms the presence of a significant crustal root as well as a thick high-velocity lithosphere in footwall of the suture, continuing northwards beneath the overriding continent for at least 200 km. These features are interpreted as underthrusting of Arabia beneath Central Iran. Time to depth migration of P receiver functions reveals an intracrustal flat interface at ∼17 km depth south of the suture; we interpret it as a significant decoupling within the upper crust. All these crustal scale structural features coherently explain different styles and kinematics of deformation in northern Zagros (Lorestan zone) with respect to its southern part (Fars zone).

Structure of Masuleh Shear Zone: Evidence for Early–Middle Jurassic Dextral Shear Along Paleo-Tethys Suture Zone in the Western Alborz, NW Iran

NASA Astrophysics Data System (ADS)

Moosavi, E.; Rasouli-Jamadi, F.

2018-03-01

The Paleo-Tethys suture zone in northern Iran was formed when the Paleo-Tethys Ocean, (between Gonwana-derived Alborz Microcontinent and the Turan Plate), closed during the Eocimmerian orogeny and after they collided together in the Mid-Late Triassic. The NW-striking Boghrov-Dagh basement Fault Zone that lies in the vicinity of Masuleh village and the southern boundary of Gasht Metamorphic Complex is a part of the Eocimmerian suture zone in the Western Alborz. Along this part of the suture zone, tourmaline leucogranites intruded in metamorphic rocks. We recognize three distinct deformation stages (D1 to D3) in the study area especially in the Masuleh Shear Zone. D1 which was synchronous with formation of the main metamorphic minerals, such as sillimanite and staurolite under medium- to high-grade metamorphic conditions probably during the Hercynian event and a NE-directed shortening. The slaty cleavage in metamorphosed Upper Paleozoic rocks and crenulation cleavage and folds in the older rocks were produced due to D2 deformation during the Eocimmerian event under greenschist facies conditions. The Masuleh Shear Zone formed as a result of a ductile strike-slip shear during the Early-Middle Jurassic Mid-Cimmerian D3 event with a pure dextral to transtension shear sense at low to locally medium-grade conditions. All of the D3 structural features agree with a NNW-directed compression and an ENE-directed extension caused by overall dextral shear parallel to the Masuleh shear zone and the Boghrov-Dagh Fault Zone. Based on the available evidence, especially cross-cutting relationships between structural fabrics and rock units, emplacement of the Gasht-Masuleh leucogranites occurred after the D2 collisional event coeval to the possible slab break-off and before the D3 event, between Eocimmerian and Mid-Cimmerian movements.

The variation of crustal structure along the Song Ma Shear Zone, Northern Vietnam

NASA Astrophysics Data System (ADS)

Su, Chien-Min; Wen, Strong; Tang, Chi-Chia; Yeh, Yu-Lien; Chen, Chau-Huei

2018-06-01

Northern Vietnam is divided into two regions by suture zone. The southwestern region belongs to the Indochina block, and the northeastern region is a portion of the South China block with distinct geological characteristics. From previous studies, the closing the Paleotethys led the collision between the Indochina and South China blocks, and this collision form the suture zone in the Middle Triassic. In the Tertiary, Indian and Eurasian plates started to collide, and this collision caused the extrusion of the Indochina block along the suture zone and a clockwise rotation. Metamorphic rocks associated with the subduction process have been found at the Song Ma Shear Zone (SMSZ) from geological surveys, which indicated that the SMSZ is a possible boundary between the South China and Indochina block. However, according to previous study, there is an argument of whether the SMSZ is a subduction zone of the South China and Indochina plates or not. In this study, we applied the H-κ and the common conversion point (CCP) stacking method using teleseismic converted waves recorded by a seismic broadband array to obtain the Moho depth, VP/VS ratio and the crustal structure along the SMSZ. The CCP results are further used to identify whether the fault extends through the entire crust or not. We have selected two profiles along the SMSZ and a profile across the SMSZ for imaging lateral variations of impedance from stacking. According to H-κ stacking results, crustal thickness vary from 26.0 to 29.3 km, and the average of VP/VS ratio is about 1.77. Finally, the CCP results also show the heterogeneity of crust among the SMSZ. These evidences might support that SMSZ is the suture zone between the South China and Indochina plates.

Fabrics and geochronology of the Wushan ductile shear zone: Tectonic implications for the Shangdan suture zone in the Qinling orogen, Central China

NASA Astrophysics Data System (ADS)

Liang, Xiao; Sun, Shengshi; Dong, Yunpeng; Yang, Zhao; Liu, Xiaoming; He, Dengfeng

2017-04-01

The ductile shearing along the Shangdan suture zone during the Paleozoic time is a key to understand the collisional deformation and tectonic regime of amalgamation between the North China Block and the South China Blocks. The Wushan ductile shear zone, a branch of the Shangdan suture, records mylonitic deformation that affected granitic and felsic rocks outcropping in an over 1 km wide belt in the western Qinling Orogenic belt. Shear sense indicators and kinematic vorticity number (0.79-0.99) of the mylonites reveal a dextral shear deformation. The quartz c-axis fabrics indicate activation of combined basal and rhomb slip, prism slip and prism slip. The dynamic recrystallization of quartz is accommodated by combined subgrain rotation and grain boundary migration. These characteristics suggest that the mylonites experienced ductile shear deformation under amphibolite facies conditions at temperatures of 500-650 C. Zircons from granitic mylonite yield a U-Pb age of 910 ± 4.8 Ma, which represents the formation age of the protolith of the mylonite. The ductile shear zone was intruded by a granitic dyke, which yields a zircon U-Pb age of 403 ± 3.5 Ma constraining the minimum age of the ductile shear deformation. Together with regional geology and available geochronological data, these structural characteristics and ages indicate that the Wushan ductile shear zone was formed by dextral shearing following the N-S shortening as a result of collision between the North China and South China blocks along the Shangdan suture.

Fabrics and geochronology of the Wushan ductile shear zone: Tectonic implications for the Shangdan suture zone in the Qinling orogen, Central China

NASA Astrophysics Data System (ADS)

Liang, Xiao; Sun, Shengsi; Dong, Yunpeng; Yang, Zhao; Liu, Xiaoming; He, Dengfeng

2017-05-01

The ductile shearing along the Shangdan suture zone during the Paleozoic time is a key to understand the collisional deformation and tectonic regime of amalgamation between the North China Block and the South China Blocks. The Wushan ductile shear zone, a branch of the Shangdan suture, records mylonitic deformation that affected granitic and felsic rocks outcropping in an over 1 km wide belt in the western Qinling Orogenic belt. Shear sense indicators and kinematic vorticity number (0.79-0.99) of the mylonites reveal a dextral shear deformation. The quartz c-axis fabrics indicate activation of combined basal and rhomb slip, prism slip and prism slip. The dynamic recrystallization of quartz is accommodated by combined subgrain rotation and grain boundary migration. These characteristics suggest that the mylonites experienced ductile shear deformation under amphibolite facies conditions at temperatures of ∼500-650 °C. Zircons from granitic mylonite yield a U-Pb age of 910 ± 4.8 Ma, which represents the formation age of the protolith of the mylonite. The ductile shear zone was intruded by a granitic dyke, which yields a zircon U-Pb age of 403 ± 3.5 Ma constraining the minimum age of the ductile shear deformation. Together with regional geology and available geochronological data, these structural characteristics and ages indicate that the Wushan ductile shear zone was formed by dextral shearing following the N-S shortening as a result of collision between the North China and South China blocks along the Shangdan suture.

Petrogenesis and tectonic setting of the Bondla mafic-ultramafic complex, western India: Inferences from chromian spinel chemistry

NASA Astrophysics Data System (ADS)

Ishwar-Kumar, C.; Rajesh, V. J.; Windley, B. F.; Razakamanana, T.; Itaya, T.; Babu, E. V. S. S. K.; Sajeev, K.

2016-11-01

Crustal-scale shear/suture zones hold prime importance because they are one of the critical parameters used for paleogeographic configurations of supercontinental assemblies. The Kumta suture, located on the western margin of peninsular India, has been interpreted as the eastern extension of the Betsimisaraka suture zone of Madagascar. This suture separates the Karwar block (ca. 3200 Ma tonalite-trondhjemite-granodiorite (TTG) and amphibolite) in the west from a quartzite-dominated shelf that overlies ca. 2571 Ma quartzo-feldspathic gneisses of the Dharwar block in the east. The NW/SE-trending Bondla ultramafic-mafic complex, situated in the arc just west of the Kumta suture, comprises gabbro, troctolite, wehrlite, dunite, peridotite, pyroxenite, chromitite and chromian spinel-bearing serpentinite. In this paper, we study the chemistry of Cr-spinels in chromitites and serpentinites to help understand their paleo-tectonic environments. The Cr-spinel in Bondla chromitites and serpentinites shows variations in Cr# [Cr/(Cr + Al)] ranging from 0.54 to 0.58 and 0.56 to 0.64 respectively; also, the Mg# [Mg/(Mg + Fe)] varies from 0.56 to 0.67 and 0.41 to 0.63 respectively. The Cr-spinels in serpentinites have strong chemical zoning with distinctive ferrian chromite rims (Mg# 0.41-0.63), whereas the Cr-spinels in chromitites are generally homogeneous with only occasional weak zoning. The spinel-core crystallization temperature in the serpentinite is estimated to be above 600 °C (the spinel stability field was calculated for equilibrium with Fo90 olivine), which suggests the core composition is chemically unaltered. The Cr-spinels in all studied samples have low-Al2O3 (15-23 wt%) and moderate to high-Cr# (0.54-0.69), suggesting derivation from a supra-subduction zone arc setting. The chemistry of clinopyroxene in serpentinite indicates a wide range of crystallization temperatures from 969 °C to 1241 °C at 1.0 GPa. The calculated parental magma composition was similar to that of a modern primitive tholeiitic basalt formed by a high-degree of mantle melting. We ascribe the formation of the subduction-generated Bondla arc to the closure of the ocean that led to the formation of the Kumta suture. Thus, chromian spinel chemistry proves to be a viable indicator that helps understand the thermal conditions and tectonic derivation of the Bondla ultramafic-mafic complex against a suture zone in western India.

Fracture propagation and stability of ice shelves governed by ice shelf heterogeneity

NASA Astrophysics Data System (ADS)

Borstad, Chris; McGrath, Daniel; Pope, Allen

2017-05-01

Tabular iceberg calving and ice shelf retreat occurs after full-thickness fractures, known as rifts, propagate across an ice shelf. A quickly evolving rift signals a threat to the stability of Larsen C, the Antarctic Peninsula's largest ice shelf. Here we reveal the influence of ice shelf heterogeneity on the growth of this rift, with implications that challenge existing notions of ice shelf stability. Most of the rift extension has occurred in bursts after overcoming the resistance of suture zones that bind together neighboring glacier inflows. We model the stresses in the ice shelf to determine potential rift trajectories. Calving perturbations to ice flow will likely reach the grounding line. The stability of Larsen C may hinge on a single suture zone that stabilizes numerous upstream rifts. Elevated fracture toughness of suture zones may be the most important property that allows ice shelves to modulate Antarctica's contribution to sea level rise.

Crustal architecture and tectonic evolution of the Cauvery Suture Zone, southern India

NASA Astrophysics Data System (ADS)

Chetty, T. R. K.; Yellappa, T.; Santosh, M.

2016-11-01

The Cauvery suture zone (CSZ) in southern India has witnessed multiple deformations associated with multiple subduction-collision history, with incorporation of the related accretionary belts sequentially into the southern continental margin of the Archaean Dharwar craton since Neoarchean to Neoproterozoic. The accreted tectonic elements include suprasubduction complexes of arc magmatic sequences, high-grade supracrustals, thrust duplexes, ophiolites, and younger intrusions that are dispersed along the suture. The intra-oceanic Neoarchean-Neoproterozoic arc assemblages are well exposed in the form of tectonic mélanges dominantly towards the eastern sector of the CSZ and are typically subjected to complex and multiple deformation events. Multi-scale analysis of structural elements with detailed geological mapping of the sub-regions and their structural cross sections, geochemical and geochronological data and integrated geophysical observations suggest that the CSZ is an important zone that preserves the imprints of multiple cycles of Precambrian plate tectonic regimes.

Seismic evidence for mantle suture and a collisional origin for the Canadian Cordillera

NASA Astrophysics Data System (ADS)

Chen, Y.; Gu, Y. J.; Currie, C. A.; Johnston, S. T.; Hung, S. H.; Schaeffer, A. J.; Audet, P.

2017-12-01

The North American Cordillera is a Phanerozoic orogenic belt that extends from Mexico to Alaska. Its eastern boundary is marked by pronounced changes in geophysical observations (e.g., mantle seismic velocity, surface heat flow, and effective elastic thickness) indicating a steep structural gradient beneath the Cordilleran foreland and the adjacent North American Craton. Seismological constraints on this boundary zone have been highly uneven: on the one hand, the knowledge of subsurface structures of the US Cordillera has been greatly enhanced by the USArray; on the other hand, detailed surveys of the northern counterpart, the Canadian Cordillera, are limited due to relatively sparse broadband data coverage. Questions pertaining to where and how Cordillera-Craton transition occurs in the upper mantle remain debated. Here, we utilize new teleseismic travel-time data from recently deployed networks in the Alberta foreland basin and nearby USArray stations and invert for mantle seismic velocities using finite-frequency tomography. The resulting high-resolution 3D model shows a dramatic increase in lithosphere thickness (>200 km) from the Cordillera to Craton. Additionally, independent calculations of mantle temperature from P (4.3%) and S (7.0%) velocity contrasts yield a consistent eastward 200-300 °C decrease at 150 km depth. We attribute the sharp structural and temperature/velocity gradients to the Cordillera-Craton boundary (CCB) established since at least the Late Cretaceous (ca. 100 Ma). The CCB dips steeply to the west beneath a carbonate belt that delineates a cryptic orogenic suture near the southern Rocky Mountain Trench, which provides strong evidence for an upper mantle suture between North America and an allochthonous Cordillera. The westward-dipping CCB may be a preserved structure associated with partial subduction of the leading edge of the North American Craton during its terminal collision with a microcontinent (Cordillera); this would require a strong craton lithosphere in order to preserve the observed geometry for >100 Ma. In this case, the earlier interpretation of the Cordillera as an accretionary orogen characterized by thin-skinned thrusting of exotic terranes over an intact North American basement and oceanward-tapering lithospheric mantle, is deemed unlikely.

Genome-wide data reveal cryptic diversity and genetic introgression in an Oriental cynopterine fruit bat radiation.

PubMed

Chattopadhyay, Balaji; Garg, Kritika M; Kumar, A K Vinoth; Doss, D Paramanantha Swami; Rheindt, Frank E; Kandula, Sripathi; Ramakrishnan, Uma

2016-02-18

The Oriental fruit bat genus Cynopterus, with several geographically overlapping species, presents an interesting case study to evaluate the evolutionary significance of coexistence versus isolation. We examined the morphological and genetic variability of congeneric fruit bats Cynopterus sphinx and C. brachyotis using 405 samples from two natural contact zones and 17 allopatric locations in the Indian subcontinent; and investigated the population differentiation patterns, evolutionary history, and the possibility of cryptic diversity in this species pair. Analysis of microsatellites, cytochrome b gene sequences, and restriction digestion based genome-wide data revealed that C. sphinx and C. brachyotis do not hybridize in contact zones. However, cytochrome b gene sequences and genome-wide SNP data helped uncover a cryptic, hitherto unrecognized cynopterine lineage in northeastern India coexisting with C. sphinx. Further analyses of shared variation of SNPs using Patterson's D statistics suggest introgression between this lineage and C. sphinx. Multivariate analyses of morphology using genetically classified grouping confirmed substantial morphological overlap between C. sphinx and C. brachyotis, specifically in the high elevation contact zones in southern India. Our results uncover novel diversity and detect a pattern of genetic introgression in a cryptic radiation of bats, demonstrating the complicated nature of lineage diversification in this poorly understood taxonomic group. Our results highlight the importance of genome-wide data to study evolutionary processes of morphologically similar species pairs. Our approach represents a significant step forward in evolutionary research on young radiations of non-model species that may retain the ability of interspecific gene flow.

Constraining the location of the Archean--Proterozoic suture in the Great Basin based on magnetotelluric soundings

USGS Publications Warehouse

Rodriguez, Brian D.; Sampson, Jay A.

2012-01-01

It is important to understand whether major mining districts in north-central Nevada are underlain by Archean crust, known to contain major orogenic gold deposits, or, alternatively, by accreted crust of the Paleoproterozoic Mojave province. Determining the location and orientation of the Archean-Proterozoic suture zone between the Archean crust and Mojave province is also critical because it may influence subsequent patterns of sedimentation, deformation, magmatism, and hydrothermal activity. In the Great Basin, the attitude of the suture zone is unknown because it is concealed below cover. A regional magnetotelluric sounding profile along the Utah-Nevada State line reveals a deeply penetrating, broad electrical conductor that may be the Archean-Proterozoic suture zone in the northwest corner of Utah. This major crustal conductor's strike direction is northwest, where it broadens to about 80 km wide below about 3-km depth. These results suggest that the southwestern limit of intact Archean crust in this part of the Great Basin is farther north than previously reported. These results also suggest that the major gold belts in north-central Nevada are located over the Paleoproterozoic Mojave province, and the Archean terrain lies northeast in the northwest corner of Utah. Rifted Archean crust segments south and west of the suture suggest that future mineral exploration northeast of current mineral trends may yield additional gold deposits.

The structure and effect of suture zones in the Larsen C Ice Shelf, Antarctica

NASA Astrophysics Data System (ADS)

McGrath, Daniel; Steffen, Konrad; Holland, Paul R.; Scambos, Ted; Rajaram, Harihar; Abdalati, Waleed; Rignot, Eric

2014-03-01

Ice shelf fractures frequently terminate where they encounter suture zones, regions of material heterogeneity that form between meteoric inflows in ice shelves. This heterogeneity can consist of marine ice, meteoric ice with modified rheological properties, or the presence of fractures. Here, we use radar observations on the Larsen C Ice Shelf, Antarctica, to investigate (i) the termination of a 25 km long rift in the Churchill Peninsula suture zone, which was found to contain 60 m of accreted marine ice, and (ii) the along-flow evolution of a suture zone originating at Cole Peninsula. We determine a steady state field of basal melting/freezing rates and apply it to a flowline model to delineate the along-flow evolution of layers within the ice shelf. The thickening surface wedge of locally accumulated meteoric ice, which likely has limited lateral variation in its mechanical properties, accounts for 60% of the total ice thickness near the calving front. Thus, we infer that the lower 40% of the ice column and the material heterogeneities present there are responsible for resisting fracture propagation and thereby delaying tabular calving events, as demonstrated in the >40 year time series leading up to the 2004/2005 calving event for Larsen C. This likely represents a highly sensitive aspect of ice shelf stability, as changes in the oceanic forcing may lead to the loss of this heterogeneity.

Preliminary Thermo-Chronometric and Paleo-Magnetic Results from the Western Margin of The Kırşehir Block: Implications for the Timing of Continental Collisions Occurred Along Neo-Tethyan Suture Zones (Central Anatolia, Turkey)

NASA Astrophysics Data System (ADS)

Gülyüz, Erhan; Özkaptan, Murat; Langereis, Cor G.; Kaymakcı, Nuretdin

2017-04-01

Closures of Paleo- (largely Paleozoic) and Neo-Tethys (largely Mesozoic) Oceans developed between Europe, Africa and Arabia are the main driving mechanisms behind the post-Triassic tectonics, magmatism and metamorphism occurred in Anatolia. Although various scenarios have been suggested for the timing and characteristics of the subduction systems, it is largely accepted that these blocks are progressively collided and amalgamated along the northern (İzmir-Ankara-Erzincan suture zone; IAESZ) and the southern (Bitlis-Zagros suture zone; BZSZ) branches of Neo-Tethys Ocean. The geographic positions of these suture zones in Anatolia are marked by imbricated stacks of largely metamorphosed remnants of the Paleo- and Neo-Tethys Oceans. In addition to this tectonic frame, the existence of another suture zone within the northern branch of the Neo-Tethys separating the Kırşehir Block, a triangular (200km*200km*200km) continental domain represented by mainly high-pressure (HP) meta-sedimentary rocks, from the Taurides, is proposed and named as Intra-Tauride Suture Zone (ITSZ). Although traces of the Neo-Tethyan closure and continental collisions in the Central Anatolia are recorded (1) in sedimentary basins as fold and thrust belt developments (as northern Taurides fold and thrust belt along IAESZ and central Taurides fold and thrust belt along ITSZ), (2) on metamorphic rocks with Late Cretaceous to Late Paleocene peak metamorphism, and (3) on magmatic rocks with Late Cretaceous - Paleocene arc-related intrusions and post-Paleocene post-collisional magmatism, timing of these continental collisions are discussed in limited studies and furthermore they indicate a large time span (post-Paleocene to Miocene) for the collisions. This study aims to date continental collisions occurred in Central Anatolia qualitatively. In this regard, low-temperature thermo-chronometric and paleo-magnetic studies were conducted on the sedimentary units cropped-out along the western and north-western margins of the Kırşehir Block where two suture zones coincided (IAESZ & ITSZ). Although, thermo-chronometric studies have not been completely conducted, initial results consistently indicate Oligocene-Early Miocene continental uplift along the western margin of the Kırşehir Block. In keeping with thermo-chronometric results, paleo-magnetic samples (400 cores) taken systematically from upper Cretaceous to Miocene sedimentary units exposed along the IAESZ and ITSZ suggest that concentration of vertical block rotations are accumulated in Oligocene-Early Miocene time interval indicating the timing of main deformation events. Based on the paleo-magnetic and low-temperature thermo-chronometric results, we propose that continental collisions along IAESZ and ITSZ in the Central Anatolia occurred during Oligocene - Early Miocene time interval which might also correspond to the commencement of continental deposition and the base of regional unconformities exposed in the region.

Tectonics of the ophiolite belt from Naga Hills and Andaman Islands, India

NASA Astrophysics Data System (ADS)

Acharyya, S. K.; Ray, K. K.; Sengupta, S.

1990-06-01

The ophiolitic rocks of Naga Hills-Andaman belt occur as rootless slices, gently dipping over the Paleogene flyschoid sediments, the presence of blue-schists in ophiolite melange indicates an involvement of the subduction process. Subduction was initiated prior to mid-Eocene as proved by the contemporaneous lower age limit of ophiolite-derived cover sediment as against the accreted ophiolites and olistostromal trench sediment. During the late Oligocene terminal collision between the Indian and Sino-Burmese blocks, basement slivers from the Sino-Burmese block, accreted ophiolites and trench sediments from the subduction zone were thrust westward as nappe and emplaced over the down-going Indian plate. The geometry of the ophiolites and the presence of a narrow negative gravity anomaly flanking their map extent, run counter to the conventional view that the Naga-Andaman belt marks the location of the suture. The root-zone of the ophiolite nappe representing the suture is marked by a partially-exposed eastern ophiolite belt of the same age and gravity-high zone, passing through central Burma-Sumatra-Java. The ophiolites of the Andaman and Naga Hills are also conventionally linked with the subduction activity, west of Andaman islands. This activity began only in late Miocene, much later than onland emplacement of the ophiolites; it further developed west of the suture in its southern part. Post-collisional northward movement of the Indian plate subparallel to the suture, also developed leaky dextral transcurrent faults close to the suture and caused Neogene-Quatemary volcanism in central Burma and elsewhere.

Healing potential of transplanted allogeneic chondrocytes of three different sources in lesions of the avascular zone of the meniscus: a pilot study.

PubMed

Weinand, Christian; Peretti, Giuseppe M; Adams, Samuel B; Randolph, Mark A; Savvidis, Estafios; Gill, Thomas J

2006-11-01

Successful treatment of tears to the avascular region of the meniscus remains a challenge. Current repair techniques, such as sutures and anchors, are effective in stabilizing the peripheral, vascularized regions of the meniscus, but are not adequate for promoting healing in the avascular region. The purpose of this study was to demonstrate the healing ability of a tissue-engineered repair technique using allogenic chondrocytes from three different sources for the avascular zone of the meniscus. Articular, auricular, and costal chondrocytes were harvested from 3-month-old Yorkshire swine. A 1-cm bucket-handle lesion was created in the avascular zone of each three swine. A cell-scaffold construct, composed of a single chondrocyte cell type and Vicryl mesh, was implanted into the lesion and secured with two vertical mattress sutures. Controls consisted of each three sutured unseeded mesh implants, suture only, and untreated lesions. The swine were allowed immediate post-operative full weight bearing. Menisci and controls were harvested after 12 weeks. In all experimental samples, lesion closure was observed. Gross mechanical testing with two Adson forceps demonstrated bonding of the lesion. Histological analysis showed formation of new tissue in all three experimental samples. None of the control samples demonstrated closure and formation of new matrix. We present preliminary data that demonstrates the potential of a tissue-engineered, allogenic cellular repair to provide successful healing of lesions in the avascular zone in a large animal model.

Cryptic trace-element alteration of Anorthosite, Stillwater complex, Montana

USGS Publications Warehouse

Czamanske, G.K.; Loferski, P.J.

1996-01-01

Evidence of cryptic alteration and correlations among K, Ba, and LREE concentrations indicate that a post-cumulus, low-density aqueous fluid phase significantly modified the trace-element contents of samples from Anorthosite zones I and II of the Stillwater Complex, Montana. Concentrations of Ba, Ca, Co, Cr, Cu, Fe, Hf, K, Li, Mg, Mn, Na, Ni, Sc, Sr, Th, Zn, and the rare-earth elements (REE) were measured in whole rocks and plagioclase separates from five traverses across the two main plagioclase cumulate (anorthosite) zones and the contiguous cumulates of the Stillwater Complex in an attempt to better understand the origin and solidification of the anorthosites. However, nearly the entire observed compositional range for many trace elements can be duplicated at a single locality by discriminating between samples rich in oikocrystic pyroxene and those which are composed almost entirely of plagioclase and show anhedral-granular texture. Plagioclase separates with high trace-element contents were obtained from the pyroxene-poor samples, for which maps of K concentration show plagioclase grains to contain numerous fractures hosting a fine-grained, K-rich phase, presumed to be sericite. Secondary processes in layered intrusions have the potential to cause cryptic disturbance, and the utmost care must be taken to ensure that samples provide information about primary processes. Although plagioclase from Anorthosite zones I and II shows significant compositional variation, there are no systematic changes in the major- or trace-element compositions of plagioclase over as much as 630 m of anorthosite thickness or 18 km of strike length. Plagioclase in the two major anorthosite zones shows little distinction in trace-element concentrations from plagioclase in the cumulates immediately below, between, and above these zones.

New insight on the paleoproterozoic evolution of the São Francisco Craton: Reinterpretation of the geology, the suture zones and the thicknesses of the crustal blocks using geophysical and geological data

NASA Astrophysics Data System (ADS)

Sampaio, Edson E. S.; Barbosa, Johildo S. F.; Correa-Gomes, Luiz C.

2017-07-01

The Archean-Paleoproterozoic Jequié (JB) and Itabuna-Salvador-Curaçá (ISCB) blocks and their tectonic transition zone in the Valença region, Bahia, Brazil are potentially important for ore deposits, but the geological knowledge of the area is still meager. The paucity of geological information restricts the knowledge of the position and of the field characteristics of the tectonic suture zone between these two crustal segments JB and ISCB. Therefore, interpretation of geophysical data is necessary to supplement the regional structural and petrological knowledge of the area as well as to assist mining exploration programs. The analysis of the airborne radiometric and magnetic data of the region has established, respectively, five radiometric domains and five magnetic zones. Modeling of a gravity profile has defined the major density contrasts of the deep structures. The integrated interpretation of the geophysical data fitted to the known geological information substantially improved the suture zone (lower plate JB versus upper plate ISCB) delimitation, the geological map of the area and allowed to estimate the thicknesses of these two blocks, and raised key questions about the São Francisco Craton tectonic evolution.

An Analysis of Wilson Cycle Plate Margins

NASA Astrophysics Data System (ADS)

Buiter, S.; Torsvik, T. H.

2012-12-01

The Wilson Cycle theory that oceans close and open along the same suture is a powerful concept in analyses of ancient plate tectonics. It implies that collision zones are structures that are able to localize extensional deformation for long times after the collision has waned. However, some sutures are seemingly never reactivated and already Tuzo Wilson recognized that Atlantic break-up did not follow the precise line of previous junction. We have reviewed margin pairs around the Atlantic and Indian Oceans with the aim to evaluate the extent to which oceanic opening used former sutures, summarize delay times between collision and break-up, and analyze the role of mantle plumes in continental break-up. We aid our analyses with plate tectonic reconstructions using GPlates (www.gplates.org). Although at first sight opening of the North Atlantic Ocean largely seems to follow the Iapetus and Rheic sutures, a closer look reveals deviations. For example, Atlantic opening did not utilize the Iapetus suture in Great Britain and rather than opening along the younger Rheic suture north of Florida, break-up occurred along the older Pan-African structures south of Florida. We find that today's oceanic Charlie Gibbs Fracture Zone, between Ireland and Newfoundland, is aligned with the Iapetus suture. We speculate therefore that in this region the Iapetus suture was reactivated as a transform fault. As others before us, we find no correlation of suture and break-up age. Often continental break-up occurs some hundreds of Myrs after collision, but it may also take over 1000 Myr, as for example for Australia - Antarctica and Congo - São Francisco. This places serious constraints on potential collision zone weakening mechanisms. Several studies have pointed to a link between continental break-up and large-scale mantle upwellings. It is, however, much debated whether plumes use existing rifts as a pathway, or whether plumes play an active role in causing rifting. We find a positive correlation between break-up age and plume age, which we interpret to indicate that plumes can aid the factual continental break-up. However, plumes may have been guided towards the rift for margins that experienced a long rift history (e.g., Norway-Greenland), to then trigger the break-up. This could offer a partial reconciliation in the debate of a passive or active role for mantle plumes in continental break-up.

Tectonic evolution of the Yarlung suture zone, Lopu Range region, southern Tibet

NASA Astrophysics Data System (ADS)

Laskowski, Andrew K.; Kapp, Paul; Ding, Lin; Campbell, Clay; Liu, XiaoHui

2017-01-01

The Lopu Range, located 600 km west of Lhasa, exposes a continental high-pressure metamorphic complex beneath India-Asia (Yarlung) suture zone assemblages. Geologic mapping, 14 detrital U-Pb zircon (n = 1895 ages), 11 igneous U-Pb zircon, and nine zircon (U-Th)/He samples reveal the structure, age, provenance, and time-temperature histories of Lopu Range rocks. A hornblende-plagioclase-epidote paragneiss block in ophiolitic mélange, deposited during Middle Jurassic time, records Late Jurassic or Early Cretaceous subduction initiation followed by Early Cretaceous fore-arc extension. A depositional contact between fore-arc strata (maximum depositional age 97 ± 1 Ma) and ophiolitic mélange indicates that the ophiolites were in a suprasubduction zone position prior to Late Cretaceous time. Five Gangdese arc granitoids that intrude subduction-accretion mélange yield U-Pb ages between 49 and 37 Ma, recording Eocene southward trench migration after collision initiation. The south dipping Great Counter Thrust system cuts older suture zone structures, placing fore-arc strata on the Kailas Formation, and sedimentary-matrix mélange on fore-arc strata during early Miocene time. The north-south, range-bounding Lopukangri and Rujiao faults comprise a horst that cuts the Great Counter Thrust system, recording the early Miocene ( 16 Ma) transition from north-south contraction to orogen-parallel (E-W) extension. Five early Miocene (17-15 Ma) U-Pb ages from leucogranite dikes and plutons record crustal melting during extension onset. Seven zircon (U-Th)/He ages from the horst block record 12-6 Ma tectonic exhumation. Jurassic—Eocene Yarlung suture zone tectonics, characterized by alternating episodes of contraction and extension, can be explained by cycles of slab rollback, breakoff, and shallow underthrusting—suggesting that subduction dynamics controlled deformation.

Barents Sea Paleozoic basement and basin configurations: Crustal structure from deep seismic and potential field data

NASA Astrophysics Data System (ADS)

Aarseth, Iselin; Mjelde, Rolf; Breivik, Asbjørn Johan; Huismans, Ritske; Faleide, Jan Inge

2016-04-01

The Barents Sea is underlain by at least two different basement domains; the Caledonian in the west and the Timanian in the east. The transition between these two domains is not well constrained and contrasting interpretations have been published recently. Interpretations of new high-quality magnetic data covering most of the SW Barents Sea has challenged the Late Paleozoic basin configurations in the western and central Barents Sea as outlined in previous studies. Two regional ocean bottom seismic (OBS) profiles were acquired in 2014. This new dataset crosses the two major directions of Caledonian deformation proposed by different authors: N-S direction and SW-NE direction. Of particular importance are the high velocity anomalies related to Caledonian eclogites, revealing the location of Caledonian suture zones in the northern Barents Sea. One of the main objectives with this project is to locate the main Caledonian suture in the western Barents Sea, as well as the possible Barentsia-Baltica suture postulated further eastwards. The collapse of the Caledonian mountain range predominantly along these suture zones is expected to be tightly linked to the deposition of large thicknesses of Devonian erosional products, and later rifting is expected to be influenced by inheritance of Caledonian trends. The P-wave travel-time modelling is done by use of a combined ray-tracing and inversion scheme, and gravity- and magnetic modelling will be used to augment the seismic model. The preliminary results indicate high P-wave velocities (mostly over 4 km/s) close to the seafloor as well as high velocity (around 6 km/s) zones at shallow depths which are interpreted as volcanic sills. The crustal transects reveal areas of complex geology and velocity inversions. A low seismic impedance contrast between the sedimentary section and top crystalline basement makes identification of this interface uncertain. Depth to Moho mostly lies around 30 km, except in an area of rapid change in Moho depth, from about 27 km to 32 km. This drop in Moho could indicate a relict subduction zone related to the Caledonian suture zone in the western Barents Sea

Imaging Ancient Sutures with EarthScope Transportable Array Magnetotelluric Data

NASA Astrophysics Data System (ADS)

Egbert, G. D.

2014-12-01

Magnetotellurics (MT) provides a powerful geophysical tool for imaging of ancient suture zones, which are frequently marked by elongated zones of very low resistivity. These conductive anomalies, which can extend to great depths and have apparently persisted for several billion years, most likely result from graphite and sulfides deeply emplaced and remobilized, through subduction, accretion and orogenesis. The Earthscope MT transportable array provides a unique broad-scale view of sutures in the continental US. In the northwestern US subvertical conductive features bound all of the major cratonic blocks. These can be identified with the Cheyenne Belt between the Wyoming Craton (WC) and Yavapai Terranes (YT), the Great Falls Tectonic Zone between WC and the Medicine Hat Block (MHB), and the Vulcan Structure of southern Alberta between MHB and the Hearne Craton. In all cases the conductive anomalies extend well into the mantle lithosphere. The more recent MT TA footprint in the north-central US (surrounding the Mid-Continent Rift (MCR)) also reveals conductive signatures of ancient sutures. The most prominent lies south of Lake Superior, just north of the Niagara Fault (NF), and can be associated with the Penokean Orogeny (~1.85 Ga). A second, further south beneath Iowa and western Wisconsin, just south of the Spirit Lake tectonic zone (SLtz), can be identified with YT accretion (~1.75 Ga). Both of these sutures are cleanly cut by the MCR. The break in the anomalies is narrow (comparable to the surface expression of the MCR) indicating that rifting impacts on the entire crustal section were highly localized. The south-dipping NF conductive anomaly extends from surface outcrop to at least the Moho. The SLtz anomaly is north-dipping, extending from mid-crust through the Moho. In both cases there is some evidence for a modestly conductive layer (likely carbon) thrust to mid-lithospheric depths within the overriding terrane.

Provenance of the Walash-Naopurdan back-arc-arc clastic sequences in the Iraqi Zagros Suture Zone

NASA Astrophysics Data System (ADS)

Ali, Sarmad A.; Sleabi, Rajaa S.; Talabani, Mohammad J. A.; Jones, Brian G.

2017-01-01

Marine clastic rocks occurring in the Walash and Naopurdan Groups in the Hasanbag and Qalander areas, Kurdistan region, Iraqi Zagros Suture Zone, are lithic arenites with high proportions of volcanic rock fragments. Geochemical classification of the Eocene Walash and Oligocene Naopurdan clastic rocks indicates that they were mainly derived from associated sub-alkaline basalt and andesitic basalt in back-arc and island arc tectonic settings. Major and trace element geochemical data reveal that the Naopurdan samples are chemically less mature than the Walash samples and both were subjected to moderate weathering. The seaway in the southern Neotethys Ocean was shallow during both Eocene and Oligocene permitting mixing of sediment from the volcanic arcs with sediment derived from the Arabian continental margin. The Walash and Naopurdan clastic rocks enhance an earlier tectonic model of the Zagros Suture Zone with their deposition occurring during the Eocene Walash calc-alkaline back-arc magmatism and Early Oligocene Naopurdan island arc magmatism in the final stages of intra-oceanic subduction before the Miocene closure and obduction of the Neotethys basin.

Anorthosites and alkaline rocks from the deep crust of peninsular India

NASA Technical Reports Server (NTRS)

Leelanandam, C.; Ratnakar, J.; Reddy, M. Narsimha

1988-01-01

The anorthosite and alkaline rock localities in the Precambrian Shield of Peninsular India were reviewed. There are approximately 50 localities of such rocks, generally restricted to the Eastern Ghats mobile belt. The alkaline plutons are typically confined to the margin of the Eastern Ghats. The anorthosites are all greater than 500 sq km, but many exhibit similarities to one another. It was suggested that the anorthosites are associated with cryptic sutures, and are thought to have originated as a result of ponding of basaltic magmas. An analogy was drawn between the Eastern Ghats belt and the Grenville Province of the Canadian Shield.

Flexural bending of southern Tibet in a retro foreland setting

PubMed Central

Wang, Erchie; Kamp, Peter J. J.; Xu, Ganqing; Hodges, Kip V.; Meng, Kai; Chen, Lin; Wang, Gang; Luo, Hui

2015-01-01

The highest elevation of the Tibetan Plateau, lying 5,700 m above sea level, occurs within the part of the Lhasa block immediately north of the India-Tibet suture zone (Yarlung Zangbo suture zone, YZSZ), being 700 m higher than the maximum elevation of more northern parts of the plateau. Various mechanisms have been proposed to explain this differentially higher topography and the rock uplift that led to it, invoking crustal compression or extension. Here we present the results of structural investigations along the length of the high elevation belt and suture zone, which rather indicate flexural bending of the southern margin of the Lhasa block (Gangdese magmatic belt) and occurrence of an adjacent foreland basin (Kailas Basin), both elements resulting from supra-crustal loading of the Lhasa block by the Zangbo Complex (Indian plate rocks) via the Great Counter Thrust. Hence we interpret the differential elevation of the southern margin of the plateau as due originally to uplift of a forebulge in a retro foreland setting modified by subsequent processes. Identification of this flexural deformation has implications for early evolution of the India-Tibet continental collision zone, implying an initial (Late Oligocene) symmetrical architecture that subsequently transitioned into the present asymmetrical wedge architecture. PMID:26174578

Viable adhered Staphylococcus aureus highly reduced on novel antimicrobial sutures using chlorhexidine and octenidine to avoid surgical site infection (SSI)

PubMed Central

Schneider, Jochen; Harrasser, Norbert; Tübel, Jutta; Mühlhofer, Heinrich; Pförringer, Dominik; von Deimling, Constantin; Foehr, Peter; Kiefel, Barbara; Krämer, Christina; Stemberger, Axel; Schieker, Matthias

2018-01-01

Background Surgical sutures can promote migration of bacteria and thus start infections. Antiseptic coating of sutures may inhibit proliferation of adhered bacteria and avoid such complications. Objectives This study investigated the inhibition of viable adhering bacteria on novel antimicrobially coated surgical sutures using chlorhexidine or octenidine, a critical factor for proliferation at the onset of local infections. The medical need, a rapid eradication of bacteria in wounds, can be fulfilled by a high antimicrobial efficacy during the first days after wound closure. Methods As a pretesting on antibacterial efficacy against relevant bacterial pathogens a zone of inhibition assay was conducted with middle ranged concentrated suture coatings (22 μg/cm). For further investigation of adhering bacteria in detail the most clinically relevant Staphylococcus aureus (ATCC®49230™) was used. Absorbable braided sutures were coated with chlorhexidine-laurate, chlorhexidine-palmitate, octenidine-laurate, and octenidine-palmitate. Each coating type resulted in 11, 22, or 33 μg/cm drug content on sutures. Scanning electron microscopy (SEM) was performed once to inspect the coating quality and twice to investigate if bacteria have colonized on sutures. Adhesion experiments were assessed by exposing coated sutures to S. aureus suspensions for 3 h at 37°C. Subsequently, sutures were sonicated and the number of viable bacteria released from the suture surface was determined. Furthermore, the number of viable planktonic bacteria was measured in suspensions containing antimicrobial sutures. Commercially available sutures without drugs (Vicryl®, PGA Resorba®, and Gunze PGA), as well as triclosan-containing Vicryl® Plus were used as control groups. Results Zone of inhibition assay documented a multispecies efficacy of novel coated sutures against tested bacterial strains, comparable to most relevant S. aureus over 48 hours. SEM pictures demonstrated uniform layers on coated sutures with higher roughness for palmitate coatings and sustaining integrity of coated sutures. Adherent S. aureus were found via SEM on all types of investigated sutures. The novel antimicrobial sutures showed significantly less viable adhered S. aureus bacteria (up to 6.1 log) compared to Vicryl® Plus (0.5 log). Within 11 μg/cm drug-containing sutures, octenidine-palmitate (OL11) showed the highest number of viable adhered S. aureus (0.5 log), similar to Vicryl® Plus. Chlorhexidine-laurate (CL11) showed the lowest number of S. aureus on sutures (1.7 log), a 1.2 log greater reduction. In addition, planktonic S. aureus in suspensions were highly inhibited by CL11 (0.9 log) represents a 0.6 log greater reduction compared to Vicryl® Plus (0.3 log). Conclusions Novel antimicrobial sutures can potentially limit surgical site infections caused by multiple pathogenic bacterial species. Therefore, a potential inhibition of multispecies biofilm formation is assumed. In detail tested with S. aureus, the chlorhexidine-laurate coating (CL11) best meets the medical requirements for a fast bacterial eradication. This suture coating shows the lowest survival rate of adhering as well as planktonic bacteria, a high drug release during the first–clinically most relevant– 48 hours, as well as biocompatibility. Thus, CL11 coatings should be recommended for prophylactic antimicrobial sutures as an optimal surgical supplement to reduce wound infections. However, animal and clinical investigations are important to prove safety and efficacy for future applications. PMID:29315313

Viable adhered Staphylococcus aureus highly reduced on novel antimicrobial sutures using chlorhexidine and octenidine to avoid surgical site infection (SSI).

PubMed

Obermeier, Andreas; Schneider, Jochen; Harrasser, Norbert; Tübel, Jutta; Mühlhofer, Heinrich; Pförringer, Dominik; Deimling, Constantin von; Foehr, Peter; Kiefel, Barbara; Krämer, Christina; Stemberger, Axel; Schieker, Matthias; Burgkart, Rainer; von Eisenhart-Rothe, Rüdiger

2018-01-01

Surgical sutures can promote migration of bacteria and thus start infections. Antiseptic coating of sutures may inhibit proliferation of adhered bacteria and avoid such complications. This study investigated the inhibition of viable adhering bacteria on novel antimicrobially coated surgical sutures using chlorhexidine or octenidine, a critical factor for proliferation at the onset of local infections. The medical need, a rapid eradication of bacteria in wounds, can be fulfilled by a high antimicrobial efficacy during the first days after wound closure. As a pretesting on antibacterial efficacy against relevant bacterial pathogens a zone of inhibition assay was conducted with middle ranged concentrated suture coatings (22 μg/cm). For further investigation of adhering bacteria in detail the most clinically relevant Staphylococcus aureus (ATCC®49230™) was used. Absorbable braided sutures were coated with chlorhexidine-laurate, chlorhexidine-palmitate, octenidine-laurate, and octenidine-palmitate. Each coating type resulted in 11, 22, or 33 μg/cm drug content on sutures. Scanning electron microscopy (SEM) was performed once to inspect the coating quality and twice to investigate if bacteria have colonized on sutures. Adhesion experiments were assessed by exposing coated sutures to S. aureus suspensions for 3 h at 37°C. Subsequently, sutures were sonicated and the number of viable bacteria released from the suture surface was determined. Furthermore, the number of viable planktonic bacteria was measured in suspensions containing antimicrobial sutures. Commercially available sutures without drugs (Vicryl®, PGA Resorba®, and Gunze PGA), as well as triclosan-containing Vicryl® Plus were used as control groups. Zone of inhibition assay documented a multispecies efficacy of novel coated sutures against tested bacterial strains, comparable to most relevant S. aureus over 48 hours. SEM pictures demonstrated uniform layers on coated sutures with higher roughness for palmitate coatings and sustaining integrity of coated sutures. Adherent S. aureus were found via SEM on all types of investigated sutures. The novel antimicrobial sutures showed significantly less viable adhered S. aureus bacteria (up to 6.1 log) compared to Vicryl® Plus (0.5 log). Within 11 μg/cm drug-containing sutures, octenidine-palmitate (OL11) showed the highest number of viable adhered S. aureus (0.5 log), similar to Vicryl® Plus. Chlorhexidine-laurate (CL11) showed the lowest number of S. aureus on sutures (1.7 log), a 1.2 log greater reduction. In addition, planktonic S. aureus in suspensions were highly inhibited by CL11 (0.9 log) represents a 0.6 log greater reduction compared to Vicryl® Plus (0.3 log). Novel antimicrobial sutures can potentially limit surgical site infections caused by multiple pathogenic bacterial species. Therefore, a potential inhibition of multispecies biofilm formation is assumed. In detail tested with S. aureus, the chlorhexidine-laurate coating (CL11) best meets the medical requirements for a fast bacterial eradication. This suture coating shows the lowest survival rate of adhering as well as planktonic bacteria, a high drug release during the first-clinically most relevant- 48 hours, as well as biocompatibility. Thus, CL11 coatings should be recommended for prophylactic antimicrobial sutures as an optimal surgical supplement to reduce wound infections. However, animal and clinical investigations are important to prove safety and efficacy for future applications.

Integration of COCORP deep reflection and magnetic anomaly analysis in the southeastern United States: Implications for origin of the Brunswick and East Coast magnetic anomalies: Alternative interpretation and reply

USGS Publications Warehouse

Hutchinson, Deborah R.; Klitgord, Kim D.; Tréhu, Anne M.; McBride, John H.; Nelson, K. D.

1990-01-01

Integration of magnetic anomaly analysis with COCORP deep reflection data from the southeastern United States provides three new constraints on the interpretation of the Brunswick and East Coast magnetic anomalies, as well as on the reflection data. These are as follows. (1) The source of the Brunswick anomaly lies within the deep crust. This anomaly is not caused by a Mesozoic rift basin, as proposed by some workers. (2) A simple, seaward-dipping, high- susceptibility slab model can explain both the Brunswick and East Coast magnetic anomalies. The along-strike change in character of the two anomalies results largely from a change in azimuth of the source body. (3) Beneath the southeastern United States, this source body dips south, lies immediately on the south flank of the prominent southward-dipping reflective zone revealed on COCORP surveys, and was previously associated with the Alleghanian suture between North America and Africa. These results imply that a dipping, highly magnetized zone in the upper plate of the Alleghanian suture is responsible for both the Brunswick and East Coast magnetic anomalies. The high- susceptibility material responsible for these anomalies might be mafic lower continental or oceanic crust thrust upward during Alleghanian continental collision, or mafic igneous material intruded into the upper plate of the suture zone during subsequent Mesozoic rifting, or both. The latter hypothesis implies that the Alleghanian suture acted, as a zone of weakness (a repository ?) which was reactivated to control the site of ultimate Atlantic rifting and possibly initial sea-floor spreading.

Significant seismic anisotropy beneath southern Tibet inferred from splitting of direct S-waves

NASA Astrophysics Data System (ADS)

Singh, Arun; Eken, Tuna; Mohanty, Debasis D.; Saikia, Dipankar; Singh, Chandrani; Ravi Kumar, M.

2016-01-01

This study presents a total of 12008 shear wave splitting measurements obtained using the reference-station technique applied to direct S-waves from 106 earthquakes recorded at 143 seismic stations of the Hi-CLIMB seismic network. The results reveal significant anisotropy in regions of southern Tibet where null or negligible anisotropy has been hitherto reported from SK(K)S measurements. While the individual fast polarization direction (FPD) at each station are found to be consistent, the splitting time delays (TDs) exhibit deviations particularly at stations located south of the Indus-Tsangpo Suture Zone. The fast polarization directions (FPDs) are oriented (a) NE-SW to E-W to the south of the Indus-Tsangpo Suture Zone (b) NE-SW to ENE-SSW between Bangong-Nujiang Suture Zone and the Indus-Tsangpo Suture Zone (ITSZ) and (c) E-W to the extreme north of the profile. The splitting time delays (δt) vary between 0.45 and 1.3 s south of the ITSZ (<30°N latitude), while they range from 0.9 to 1.4 s north of it. The overall trends are similar to SKS/SKKS results. However, the differences may be due to the not so near vertical paths of direct S waves which may sample the anisotropy in a different way in comparison to SKS waves, or insufficient number of SKS observations. The significant anisotropy (∼ 0.8 s) observed beneath Himalaya reveals a complex deformation pattern in the region and can be best explained by the combined effects of deformation related to shear at the base of the lithosphere and subduction related flows with possible contributions from the crust. Additional measurements obtained using direct S-waves provide new constraints in regions with complex anisotropy.

Electrical resistivity structures and tectonic implications of Main Karakorum Thrust (MKT) in the western Himalayas: NNE Pakistan

NASA Astrophysics Data System (ADS)

Shah, Syed Tallataf Hussain; Zhao, Junmeng; Xiao, Qibin; Bhatti, Zahid Imran; Khan, Nangyal Ghani; Zhang, Heng; Deng, Gong; Liu, Hongbing

2018-06-01

We discovered a conductive zone along Main Karakoram Thrust which could be an indication of flat subduction of Kohistan island arc beneath the Eurasian plate. Kohistan island arc collided with the Karakoram Block of the Eurasian Plate in the Early Cretaceous. However, according to findings of many researchers, the subduction ceased about 75 Ma ago. The presence of the conductive zone is an indication of current magmatism or hydrothermal fluids. Maximum low-frequency band data from Fourteen sites with recording periods of 10-2-103 s was acquired along a profile crossing MKT. Our results reveal the existence of multiple low resistivity zones beneath the region extending from shallow to the depths of more than 100 km. These low-resistivity zones might be a signature of the ongoing magmatic activities or hydrothermal fluids along the Shyok Suture Zone. In addition, we discovered another large conductive body towards the south of the study area which could be a result of uprising magmatic plumes generated by the subducting Indian plate along the Indian suture zone and their entrapment in the overlying Kohistan block.

Structural anatomy of a dismembered ophiolite suite from Gondwana: The Manamedu complex, Cauvery suture zone, southern India

NASA Astrophysics Data System (ADS)

Chetty, T. R. K.; Yellappa, T.; Nagesh, P.; Mohanty, D. P.; Venkatasivappa, V.; Santosh, M.; Tsunogae, T.

2011-08-01

Detailed geological and structural mapping of the Manamedu ophiolite complex (MOC), from the south-eastern part of the Cauvery suture zone (CSZ) within the Gondwana collisional suture in southern India reveals the anatomy of a dismembered ophiolite succession comprising pyroxenite actinolite-hornblendite, hornblendite, gabbro-norite, gabbro, anorthosite, amphibolite, plagiogranite, mafic dykes, and associated pelagic sediments such as chert-magnetite bands and carbonate horizons. The magmatic foliation trajectory map shows inward dipping foliations and a variety of fold structures. Structural cross-sections of the MOC reveal gentle inward dips with repetition and omission of different lithologies often marked by curvilinear hinge lines. The succession displays imbricate thrust sheets and slices of dismembered ophiolite suites distributed along several localities within the CSZ. The MOC can be interpreted as a deformed large duplex structure associated with south-verging back thrust system, consistent with crustal-scale 'flower structure'. The nature and distribution of ophiolitic rocks in the CSZ suggest supra-subduction zone setting associated with the lithospheric subduction of the Neoproterozoic Mozambique Ocean, followed by collision and obduction during the final stage of amalgamation of the Gondwana supercontinent in the end Precambrian.

Convective fractionation: A mechanism to provide cryptic zoning (macrosegregation), layering, crescumulates, banded tuffs and explosive volcanism in igneous processes

NASA Astrophysics Data System (ADS)

Rice, Alan

1981-01-01

A large array of igneous and volcanic features has characteristics that are recognized in other disciplines as conclusive and direct evidence of convvection in stratified and/or solidifying melts; e.g., macroscopic segregation (cryptic variation, zoning in magma chambers), mineral layering (in mafic intrusives), crescumulates (fingering) in the vertical and horizontal, banding (in pyroclastics), 'rollover' with attendant flashing of volatiles (explosive volcanism), etc. Some quantitative and qualitative aspect of convection in solidifying and or stratified melts (e.g., mineral layer widths such as are observed inl the Skaergaards) are examined to show consistency with field evidence. Convective fractionation does not possess the physical implausibilities of gravitational segregation (crystal settling). Neither is the field evidence as ambiguous if interpreted in terms of convective fractionation (which can explain amongst other things heavier material overlying lighter). Convective fractionation may operate on larger scales in the interior of planets.

Morphologically cryptic Amazonian bird species pairs exhibit strong postzygotic reproductive isolation.

PubMed

Pulido-Santacruz, Paola; Aleixo, Alexandre; Weir, Jason T

2018-03-14

We possess limited understanding of how speciation unfolds in the most species-rich region of the planet-the Amazon basin. Hybrid zones provide valuable information on the evolution of reproductive isolation, but few studies of Amazonian vertebrate hybrid zones have rigorously examined the genome-wide underpinnings of reproductive isolation. We used genome-wide genetic datasets to show that two deeply diverged, but morphologically cryptic sister species of forest understorey birds show little evidence for prezygotic reproductive isolation, but substantial postzygotic isolation. Patterns of heterozygosity and hybrid index revealed that hybrid classes with heavily recombined genomes are rare and closely match simulations with high levels of selection against hybrids. Genomic and geographical clines exhibit a remarkable similarity across loci in cline centres, and have exceptionally narrow cline widths, suggesting that postzygotic isolation is driven by genetic incompatibilities at many loci, rather than a few loci of strong effect. We propose Amazonian understorey forest birds speciate slowly via gradual accumulation of postzygotic genetic incompatibilities, with prezygotic barriers playing a less important role. Our results suggest old, cryptic Amazonian taxa classified as subspecies could have substantial postzygotic isolation deserving species recognition and that species richness is likely to be substantially underestimated in Amazonia. © 2018 The Author(s).

Paleomagnetic reconstruction of the Neotethyan Suture in Central Anatolia (Turkey)

NASA Astrophysics Data System (ADS)

Ozkaptan, M.; Gulyuz, E.; Kaymakci, N.; Langereis, C. G.

2016-12-01

The consumption of the Neo-Tethyan Ocean and the accretion of intervening continental blocks such as the Taurides and Kırşehir Block in the south and the Pontides in the north since the Mesozoic occurred along two sutures. The İzmir-Ankara Suture Zone (IASZ) between the Pontides in the north and the Taurides in the south and Intra-Tauride suture Zone (ITSZ) between the Taurides and the Kırşehir block meets around the Haymana Basin. The IASZ follows roughly an E-W trend and makes a sharp bend of approximately of 90° along the western margin of the Çankırı Basin. The ITSZ, on the other hand, follows a NW-SE trend parallel to the Tuz Gölü Fault Zone and overprinted by the structures related to the İASZ in the north. From West to East; the Haymana, Tuz Gölü and Çankırı basins straddle these suture zones and are developed in relation to the subduction and collision processes, which make them invaluable for unraveling deformation history and evolution of the Neotethys. In this regard we have conducted a very detailed paleomagnetic study to determine vertical axis rotations in the region, mainly on the Late Cretaceous to Recent infill of these basins. Results have shown that the region undergone strong clockwise (CW) and counter-clockwise (CCW) rotations, up to ±90° in places, resulting in the present geometry of the region. The central part of the Haymana Basin rotated as much as 90° CCW sense while its northern parts and the Tuz Gölü basin rotated 30° CW sense, which contradicts with almost all the published paleomagnetic results from the region. The restored geometries, based on new paleomagnetic data indicate that Haymana, Tuz Gölü basins and the SW margin of the Çankırı Basin were initially oriented in N-S direction prior to the Eocene. These results indicate that the most of the paleogeographical maps and evolutionary scenarios and models proposed for the region previously requires major re-thinking and serious revisions.

Stem cell-based tissue-engineering for treatment of meniscal tears in the avascular zone.

PubMed

Zellner, Johannes; Hierl, Katja; Mueller, Michael; Pfeifer, Christian; Berner, Arne; Dienstknecht, Thomas; Krutsch, Werner; Geis, Sebastian; Gehmert, Sebastian; Kujat, Richard; Dendorfer, Sebastian; Prantl, Lukas; Nerlich, Michael; Angele, Peter

2013-10-01

Meniscal tears in the avascular zone have a poor self-healing potential, however partial meniscectomy predisposes the knee for early osteoarthritis. Tissue engineering with mesenchymal stem cells and a hyaluronan collagen based scaffold is a promising approach to repair meniscal tears in the avascular zone. 4 mm longitudinal meniscal tears in the avascular zone of lateral menisci of New Zealand White Rabbits were performed. The defect was left empty, sutured with a 5-0 suture or filled with a hyaluronan/collagen composite matrix without cells, with platelet rich plasma or with autologous mesenchymal stem cells. Matrices with stem cells were in part precultured in chondrogenic medium for 14 days prior to the implantation. Menisci were harvested at 6 and 12 weeks. The developed repair tissue was analyzed macroscopically, histologically and biomechanically. Untreated defects, defects treated with suture alone, with cell-free or with platelet rich plasma seeded implants showed a muted fibrous healing response. The implantation of stem cell-matrix constructs initiated fibrocartilage-like repair tissue, with better integration and biomechanical properties in the precultured stem cell-matrix group. A hyaluronan-collagen based composite scaffold seeded with mesenchymal stem cells is more effective in the repair avascular meniscal tear with stable meniscus-like tissue and to restore the native meniscus. Copyright © 2013 Wiley Periodicals, Inc., a Wiley Company.

Intracontinental subduction and hinged unroofing along the Salmon River Suture Zone, west central Idaho

NASA Astrophysics Data System (ADS)

Selverstone, Jane; Wernicke, Brian P.; Aliberti, Elaine A.

1992-02-01

The Salmon River suture zone in west central Idaho juxtaposes volcanic arc rocks of the Wallowa terrane directly against cratonic North America. Detailed metamorphic studies along a 10 km traverse perpendicular to the suture indicate that the arc and two crystalline fragments thrust upon it each record different pressure-temperature (P-T) histories. From lowest to highest structural level: the Wallowa terrane shows only subgreenschist metamorphism, the Rapid River plate (RRP) records unroofing and cooling from ˜8 kbar and 550°C to 6 kbar and 475°-500°C, and the Pollock Mountain plate (PMP) shows evidence for polymetamorphism and records burial and heating paths to final equilibration conditions of 9-11 kbar and 600°-625° C. Ar-Ar hornblende ages combined with the P-T data suggest that currently exposed levels of the RRP and PMP were juxtaposed against one another at 15-20 km depth at or prior to 118 Ma, indicating that 10-20 km of uplift, and hence also the onset of collision-related metamorphism, occurred before ˜118 Ma. Correlation of the metamorphic and age data with geometric constraints from the initial Sr 0.706 line and the dimensions of the RRP and PMP permit construction of large-scale retrodeformable sections of the west side of the suture from Late Jurassic through Late Cretaceous time. The abrupt nature of the Sr 0.706 line implies that the arc-continent boundary extends vertically through most of the crust, which requires sharp downwarping of the arc lithosphere in order to account for the PMP metamorphic data. Narrow zoned overgrowths on PMP garnets record this burial event and require initially rapid (≥3 km/m.y.) uplift rates in order to be preserved. We suggest that the onset of rapid uplift resulted from the separation of the negatively buoyant lithospheric root from the downwarped arc, allowing buoyant rise of fragments of thickened crust. Detachment of the root is suggested to change the environment of crustal shortening from one in which footwalls of thrusts or shear zones sink to one in which hanging walls rise. This mechanism represents an alternative to cessation of shortening or onset of tectonic denudation as an explanation for the transition from burial to uplift of high-pressure metamorphic terrains. Subsequent uplift appears to have been slow and to have occurred in a hinged fashion such that mineral and whole rock ages decrease systematically towards the suture zone. The consumption of lithosphere during ≥40 km of shortening between two crustal blocks implies that the Salmon River suture is the trace of an intracontinental subduction zone. Burial and collision apparently began before about 130 Ma, and thus any precollision strike-slip faulting or tectonic escape of intervening terranes was likely accomplished in Jurassic and earliest Cretaceous time.

Implications of SHRIMP and microstructural data on the age and kinematics of shearing in the Asir terrane, southern Arabian Shield, Saudi Arabia

USGS Publications Warehouse

Johnson, P.R.; Kattan, F.H.; Wooden, J.L.

2001-01-01

The Asir terrane consists of north-trending belts of variably metamorphosed volcanic, sedimentary, and plutonic rocks that are cut by numerous shear zones (Fig. 1). Previous workers interpreted the shear zones as sutures, structures that modify earlier sutures, or structures that define the margins of tectonic belts across which there are significant lithologic differences and along which there may have been major transposition (Frisch and Al-Shanti, 1977; Greenwood et al., 1982; Brown et al., 1989). SHRIMP data from zircons (Table 1) and sense-of-shear data recently acquired from selected shear zones in the terrane help to constrain the minimum ages and kinematics of these shearing events and lead to an overall model of terrane assembly that is more complex than previously proposed. 

Plate-boundary kinematics in the Alps: Motion in the Arosa suture zone

NASA Astrophysics Data System (ADS)

Ring, Uwe; Ratschbacher, Lothar; Frisch, Wolfgang

1988-08-01

The Arosa zone forms a melange complex along the Penninic/Austroalpine boundary and belongs to the main Alpine suture zone. Accretion and plate collision occurred during Cretaceous and lower Tertiary time. A mixture of ophiolitic rocks and pelagic sediments is imbricated with flysch and blocks of Austroalpine (continental) derivation. We present a description of deformation structures, an analysis of strain, and a kinematic interpretation based on structural work. Deformation histories of imbricates show a translation path that was west-directed between ca. 110 and 50 Ma and north-directed thereafter. The kinematics of the Arosa zone agrees with the recently deduced displacement history of the Austroalpine units in the Eastern Alps during the Cretaceous orogeny. This calls for a predominantly top-to-the-west imbrication of Austroalpine and Penninic units and is in contradiction to what is inferred in most models of the Eastern Alps. A direct relation between the deformation along the Austroalpine margin and relative plate motion existed.

Late Jurassic-Early Cretaceous radiolarian age constraints from the sedimentary cover of the Amasia ophiolite (NW Armenia), at the junction between the Izmir-Ankara-Erzinçan and Sevan-Hakari suture zones

NASA Astrophysics Data System (ADS)

Danelian, T.; Asatryan, G.; Galoyan, Gh.; Sahakyan, L.; Stepanyan, J.

2016-01-01

The Amasia ophiolite, situated at the northernmost corner of Armenia, is part of the Sevan-Hakari suture zone which links with the Izmir-Ankara-Erzinçan suture zone in northern Turkey. Three new radiolarian assemblages have been extracted from siliceous sedimentary rocks that accumulated on the Amasia ophiolite in an oceanic setting. Two of these assemblages were extracted from red-brownish bedded cherts overlying basaltic lavas; one of these is likely to be middle Oxfordian to early Kimmeridgian in age, while the second correlates with the Berriasian. Similar time-equivalent lava-chert sequences have been dated recently using radiolarians from the Stepanavan, Vedi and Sevan ophiolite units, where they are considered to relate to submarine volcanic activity in the back-arc marginal basin in which the Armenian ophiolites were formed. The third radiolarian assemblage, of late Barremian age, was extracted from a more than 15-m-thick volcaniclastic-chert sequence. The related volcanic activity is likely to have been subaerial and probably relates to the formation of an oceanic volcanic plateau; no Cretaceous subaerial volcanism has been previously recorded in the Lesser Caucasus area.

Spatial evolution of Zagros collision zone in Kurdistan - NW Iran, constraints for Arabia-Eurasia oblique convergence

NASA Astrophysics Data System (ADS)

Sadeghi, S.; Yassaghi, A.

2015-09-01

Stratigraphy, detailed structural mapping and crustal scale cross section of the NW Zagros collision zone evolved during convergence of the Arabian and Eurasian plates were conducted to constrain the spatial evolution of the belt oblique convergence since Late Cretaceous. Zagros orogeny in NW Iran consists of the Sanandaj-Sirjan, Gaveh Rud and ophiolite zones as internal, and Bisotoun, Radiolarite and High Zagros zones as external parts. The Main Zagros Thrust is known as major structures of the Zagros suture zone. Two stages of deformation are recognized in the external parts of Zagros. In the early stage, presence of dextrally deformed domains beside the reversely deformed domains in the Radiolarite zone as well as dextral-reverse faults in both Bisotoun and Radiolarite zones demonstrates partitioning of the dextral transpression. In the late stage, southeastward propagation of the Zagros orogeny towards its foreland resulted in synchronous development of orogen-parallel strike-slip and pure thrust faults. It is proposed that the first stage related to the late Cretaceous oblique obduction, and the second stage is resulted from Cenozoic collision. Cenozoic orogen-parallel strike-slip component of Zagros oblique faulting is not confined to the Zagros suture zone (Main Recent) but also occurred in the more external part (Marekhil-Ravansar fault system). Thus, it is proposed that oblique convergence of Arabia-Eurasia plates occurred in Zagros collision zone since the Late Cretaceous.

Preliminary Geologic Map of the Hemet 7.5' Quadrangle, Riverside County, California

USGS Publications Warehouse

Morton, Douglas M.; Matti, Jon C.

2005-01-01

The Hemet 7.5' quadrangle is located near the eastern edge of the Perris block of the Peninsular Ranges batholith. The northeastern corner of the quadrangle extends across the San Jacinto Fault Zone onto the edge of the San Jacinto Mountains block. The Perris block is a relatively stable area located between the Elsinore Fault Zone on the west and the San Jacinto Fault Zone on the east. Both of the fault zones are active; the San Jacinto being the seismically most active in southern California. The fault zone is obscured by very young alluvial deposits. The concealed location of the San Jacinto Fault Zone shown on this quadrangle is after Sharp, 1967. The geology of the quadrangle is dominated by Cretaceous tonalite formerly included in the Coahuila Valley pluton of Sharp (1967). The northern part of Sharp's Coahuila Valley pluton is separated out as the Hemet pluton. Tonalite of the Hemet pluton is more heterogeneous than the tonalite of the Coahuila Valley pluton and has a different sturctural pattern. The Coahuila Valley pluton consists of relatively homogeneous hornblende-biotite tonalite, commonly with readily visible large euhedral honey-colored sphene crystals. Only the tip of the adjacent Tucalota Valley pluton, another large tonalite pluton, extends into the quadrangle. Tonalite of the Tucalota Valley pluton is very similar to the tonalite of the Coahuila Valley pluton except it generally lacks readily visible sphene. In the western part of the quadrangle a variety of amphibolite grade metasedimentary rocks are informally referred to as the rocks of Menifee Valley; named for exposures around Menifee Valley west of the Hemet quadrangle. In the southwestern corner of the quadrangle a mixture of schist and gneiss marks a suture that separated low metamorphic grade metasedimentary rocks to the west from high metamorphic grade rocks to the east. The age of these rocks is interpreted to be Triassic and the age of the suturing is about 100 Ma, essentially the same age as the adjacent Coahuila Valley pluton. Rocks within the suture zone consist of a mixture of lithologies from both sides of the suture. Gneiss, schist, and anatectic gneiss are the predominate lithologies within the rocks on the east side of the suture. Lesser amounts of metalithic greywacke and lenticular masses of black amphibolite are subordinate rock types. Biotite, biotite-sillimanite and lesser amounts of garnet-biotite-sillimanite schist and metaquartzite-metalithic greywacke lithologies occur west of the suture. Pleistocene continental beds, termed the Bautista beds occur east of the San Jacinto Fault Zone in the northeast corner of the quadrangle. Most of the Bautista beds were derived from the San Jacinto pluton that is located just to the east of the sedimentary rocks. Along the northern part of the quadrangle is the southern part of a large Holocene-late Pleistocene fan emanating from Baustista Canyon. Sediments in the Bautista fan are characterized by their content of detritus derived from amphibolite grade metasedimentary rocks located in the Bautista Canyon drainage. Between the Holocene-late Pleistocene Bautista fan and the Santa Rosa Hills is the remnant of a much older Bautista Canyon alluvial fan. A pronounced Holocene-late Pleistocene channel was developed along the south fringe of the very old alluvial fan and the Santa Rosa Hill. A now dissected late to middle Pleistocene alluvial complex was produced by the coalesced fans of Goodhart, St. Johns, and Avery canyons, and Cactus Valley. Pleistocene continental beds, termed the Bautista beds occur east of the San Jacinto Fault Zone in the northeast corner of the quadrangle. Most of the Bautista beds were derived from the San Jacinto pluton that is located just to the east of the sedimentary rocks. Along the northern part of the quadrangle is the southern part of a large Holocene-late Pleistocene fan emanating from Baustista Canyon. Sediments in the Bautista fan are characterized by

Sutures and an Anomalous Deep Lithospheric Electrical Resistor in the Southeastern United States as Revealed by EarthScope Magnetotelluric Data

NASA Astrophysics Data System (ADS)

Murphy, B. S.; Egbert, G. D.

2016-12-01

We use newly acquired long-period magnetotelluric data to examine lithospheric structure beneath the modern Southern Appalachian Mountains and the adjacent Piedmont. The New York-Alabama Lineament is clearly visible both in inverse models and in the data themselves as a major Appalachian-parallel, mid- to lower-crustal conductive feature. This observation supports geologically-based interpretations of the NY-AL Lineament as a major Grenville suture. We also discern several other suture zones in our inverse models, including the Central Piedmont Suture. Interestingly, we do not observe any geoelectric signature of the Suwannee Suture. Most strikingly, we find a zone of exceptionally high resistivity (>1000 μm) that extends to a depth of more than 200 km beneath the modern Piedmont. This resistive block abuts more conductive lithosphere ( 100 μm, as would be expected for Phanerozoic lithosphere) to the northwest. The boundary between these two distinct domains coincides with the modern Appalachian topographic escarpment to within our resolution. The high resistivity values would seem to require completely dry, highly depleted lithosphere at anomalously cold temperatures; however, corresponding seismically fast lithospheric mantle that would be expected for such a structure has not been observed in any previous studies. The exact nature of this feature therefore remains uncertain at present. Regardless, as it is a persistent feature in inversions and it is also readily apparent in the impedance data, this geoelectric structure likely holds important implications for the past, present, and future tectonic evolution of the Southeastern United States.

Closure of the Mongol-Okhotsk Ocean as Constrained by Late Permian to Early Cretaceous Paleomagnetic Data from the Suture Zone

NASA Astrophysics Data System (ADS)

Cogne, J.; Kravchinsky, V.; Gilder, S.; Hankard, F.

2005-12-01

The Paleozoic Mongol-Okhotsk Ocean separated the Siberian craton to the north from a landmass composed of Amuria, Tarim, Qaidam, Tibet and the North and South China blocks to the south. Based on a comparison of paleomagnetic data from the NCB with the Eurasian apparent polar wander path, this ocean closed by the beginning of the Cretaceous. We present here a review of recent paleomagnetic studies of Late Permian to Early Cretaceous formations from the Transbaikal area of south Siberia, coming from localities situated on both sides of the Mongol-Okhotsk suture zone. The main conclusions that we draw from these studies are as follows. (1) A Late Permian ~4500 km latitude difference indeed existed between Amuria and the Siberia blocks at 110°E longitude. (2) In Middle-Late Jurassic times, a 1700 to 2700 km paleolatitudinal gap still existed between the two blocks. This contradicts geological interpretations of a Middle Jurassic closure of the ocean at this longitude. (3) Consistency of Early Cretaceous paleolatitudes from both sides of the suture demonstrates the closure of the ocean at that time. Altogether, these suggest a quite fast closure between the Middle Jurassic and the Early Cretaceous, at about 15±11 cm/yr. Finally, all pre-Late Cretaceous paleomagnetic poles appear to be distributed along small-circles centered on site localities. We think this is due to continued deformation acting in the Mongol-Okhotsk suture region related to suturing. Conversely, the post-Early Cretaceous rotations may be related to Tertiary deformation under the effect of the India-Asia collision.

Barents Sea Crustal and Upper Mantle Structure from Deep Seismic and Potential Field Data

NASA Astrophysics Data System (ADS)

Aarseth, I.; Mjelde, R.; Breivik, A. J.; Minakov, A.; Huismans, R. S.; Faleide, J. I.

2016-12-01

The Barents Sea basement comprises at least two different domains; the Caledonian in the west and the Timanian in the east. Contrasting interpretations have been published recently, as the transition between these two domains is not well constrained. Interpretations of new high-quality magnetic data covering most of the SW Barents Sea challenged previous studies of the Late Paleozoic basin configurations in the western and central Barents Sea. Two major directions of Caledonian structures have been proposed by different authors: N-S and SW-NE. Two regional ocean bottom seismic (OBS) profiles, crossing these two major directions, were acquired in 2014.The primary goal in this project is to locate the main Caledonian suture in the western Barents Sea, as well as the possible Barentsia-Baltica suture postulated further eastwards. High velocity anomalies associated with Caledonian eclogites are particularly interesting as they may be related to Caledonian suture zones. The collapse of the Caledonian mountain range predominantly along these suture zones is expected to be closely linked to the deposition of Devonian erosional products, and subsequent rifting is likely to be influenced by inheritance of Caledonian trends. P-wave travel-time modelling is done by use of a combined ray-tracing and inversion scheme, and gravity modelling has been used to support the seismic model. The results indicate high P-wave velocities (mostly over 4 km/s) close to the seafloor as well as high velocity (around 6 km/s) zones at shallow depths which are interpreted as volcanic sills. The crustal transect reveals areas of complex geology and velocity inversions. Strong reflections from within the crystalline crust indicate a heterogeneous basement terrain. Gravity modelling agrees with this, as several blocks with variable densities had to be introduced in order to reproduce the observed gravity anomalies. Refractions from the top of the crystalline basement together with reflections from the Moho gives basement velocities from 6.2 km/s at the top to 6.7 km/s at the base of the crust. In the middle of the profile, a rapid deepening of Moho creates a root structure that may be interpreted in terms of a Caledonian suture zone, with the crustal root representing a remnant of the continental collision.

High-Resolution 3D P-Wave Velocity Model in the Trans-European Suture Zone in Poland

NASA Astrophysics Data System (ADS)

Polkowski, M.; Grad, M.; Ostaficzuk, S.

2014-12-01

Poland is located on conjunction of major European tectonic units - the Precambrian East European Craton and the Paleozoic Platform of Central and Western Europe. This conjunction is known as Trans-European Suture Zone (TESZ). Geological and seismic structure under area of Poland is well studied by over one hundred thousand boreholes, over thirty deep seismic refraction and wide angle reflection profiles and other methods: vertical seismic profiling, magnetic, gravity, magnetotelluric, thermal. Compilation of these studies allows creation of detailed, high-resolution 3D P-wave velocity model for entire Earth's crust in the area of Poland. Model provides detailed six layer sediments (Tertiary and Quaternary, Cretaceous, Jurassic, Triassic, Permian, old Paleozoic), consolidated / crystalline crust and uppermost mantle. Continental suturing is a fundamental part of the plate tectonic cycle, and knowing its detailed structure allows understanding plate tectonic cycle. We present a set of crustal cross sections through the TESZ, illustrating differentiation in the structure between Precambrian and Wariscan Europe. National Science Centre Poland provided financial support for this work by NCN grant DEC- 2011/02/A/ST10/00284.

Conservative management of partial extensor tendon lacerations greater than half the width of the tendon in manual workers.

PubMed

Al-Qattan, Mohammad M

2015-04-01

Conservative management (without suturing or splints) of partial extensor tendon lacerations greater than half the width of the tendon has not been previously investigated. In this prospective study, a total of 45 injured tendons (with lacerations involving 55%-90% of the width of the tendon) in 39 patients were treated conservatively. Injury zones I, III, and V of the fingers; and zones I and III of the thumb were excluded. Immediate non-resistive active mobilization was initiated and continued for 4 weeks, followed by resistive exercises. Patients were allowed to go back to work after 6 weeks. There were no cases of ruptures, triggering, infection, or complex regional pain syndrome. At final follow-up (8-9 months after injury), all patients obtained full range of motion with no extension lags. All patients were able to go back to normal duties. We conclude that early active motion without the use of splints or sutures in major extensor tendon lacerations in zones II, IV, VI-VIII of the fingers; and zones II, IV, and V of the thumb is safe.

Lithospheric Structure of the Arabian Shield from the Joint Inversion of Receiver Function and Surface-Wave Dispersion Observations

DTIC Science & Technology

2006-04-01

These microplates are separated by four ophiolite-bearing suture zones of two types: the Bir Umq and Yanbu sutures, formed by island-arc-island...Am., 82, 1453- 1474,1992. (UNCLASSIFIED) Coleman, R. G., Ophiolites. Ancient Oceanic Lithosphere ?, 229 pp., Springer-Verlag, Berlin, 1977...African microplate accretion of the Arabian shield, Bull. Seism. Soc. Am. 96, 817-826, 1985. (UNCLASSIFIED) Su, W., R. L. Woodward, and A. M

Control of Precambrian basement deformation zones on emplacement of the Laramide Boulder batholith and Butte mining district, Montana, United States

USGS Publications Warehouse

Berger, Byron R.; Hildenbrand, Thomas G.; O'Neill, J. Michael

2011-01-01

What are the roles of deep Precambrian basement deformation zones in the localization of subsequent shallow-crustal deformation zones and magmas? The Paleoproterozoic Great Falls tectonic zone and its included Boulder batholith (Montana, United States) provide an opportunity to examine the importance of inherited deformation fabrics in batholith emplacement and the localization of magmatic-hydrothermal mineral deposits. Northeast-trending deformation fabrics predominate in the Great Falls tectonic zone, which formed during the suturing of Paleoproterozoic and Archean cratonic masses approximately 1,800 mega-annum (Ma). Subsequent Mesoproterozoic to Neoproterozoic deformation fabrics trend northwest. Following Paleozoic through Early Cretaceous sedimentation, a Late Cretaceous fold-and-thrust belt with associated strike-slip faulting developed across the region, wherein some Proterozoic faults localized thrust faulting, while others were reactivated as strike-slip faults. The 81- to 76-Ma Boulder batholith was emplaced along the reactivated central Paleoproterozoic suture in the Great Falls tectonic zone. Early-stage Boulder batholith plutons were emplaced concurrent with east-directed thrust faulting and localized primarily by northwest-trending strike-slip and related faults. The late-stage Butte Quartz Monzonite pluton was localized in a northeast-trending pull-apart structure that formed behind the active thrust front and is axially symmetric across the underlying northeast-striking Paleoproterozoic fault zone, interpreted as a crustal suture. The modeling of potential-field geophysical data indicates that pull-apart?stage magmas fed into the structure through two funnel-shaped zones beneath the batholith. Renewed magmatic activity in the southern feeder from 66 to 64 Ma led to the formation of two small porphyry-style copper-molybdenum deposits and ensuing world-class polymetallic copper- and silver-bearing veins in the Butte mining district. Vein orientations parallel joints in the Butte Quartz Monzonite that, in turn, mimic Precambrian deformation fabrics found outside the district. The faults controlling the Butte veins are interpreted to have formed through activation under shear of preexisting northeast-striking joints as master faults from which splay faults formed along generally east-west and northwest joint plane orientations.

Structural terranes and their relationships in Sierra Leone

NASA Astrophysics Data System (ADS)

Williams, Howard R.; Culver, Stephen J.

Sierra Leone, composed mainly of Archaean granite-greenstone terrane, is bounded in the west by a westward dipping zone of intense, ductile, simple shear deformation which produced very fine-grained, high grade rocks. This zone has been interpreted as a possible Archaean suture developed following the collision of the Guyana Shield and the West African Craton. Granulite facies metamorphic supracrustals of the Kasila Group occur to the west of the sheared zone. Marampa Group lower grade metamorphics were thrust eastwards during the collision event. Late Precambrian rifting, well to the east of the mylonite zone and subsequent compression, preserved very low grade to unmetamorphosed Rokel River Group sediments and volcanics. Limited Pan-African tectonic transport of Archaean and late Precambrian material was again toward the east. All structural and stratigraphic units can be traced northward into Guinea where they disappear beneath the Paleozoic sediments of the Bové Basin. To the south, the Kasila Group, the granite-greenstone terrane and the mylonitized zone can be traced into Liberia. The Gibi Mountain Formation of Liberia is probably laterally equivalent to the lower portions of the Rokel River Group. This interpretation of the geology of Sierra Leone differs greatly from that of Guinea where the mylonitized zone, associated with a positive gravity anomaly, has been interpreted as a suture zone resulting from Pan-African continent-continent collision.

Flexor Tendon Repair With Looped Suture: 1 Versus 2 Knots.

PubMed

Gil, Joseph A; Skjong, Christian; Katarincic, Julia A; Got, Christopher

2016-03-01

To assess the strength of flexor tendon repair with looped suture. We hypothesized that, after passing the intact looped suture in the desired repair configuration, splitting the loop and tying 2 independent knots would increase the strength of flexor tendon repair. Thirty-two flexor tendons were harvested and were sharply transected in zone II. The tendons were repaired with a 4-strand core suture repair using 3-0 looped nonabsorbable nylon suture. The harvested tendons were randomly assigned and repaired with either a 1- or a 2-knot construct. The repaired flexor tendons were fixed in a servohydraulic material testing system and were loaded to failure either with uniaxial tension or cyclically. The average force at failure was 43 N for the 1-knot repair and 28 N for the 2-knot repair. The mode of failure of 15 of the flexor tendon repairs that were cyclically loaded to failure was suture pull-out. The average number of cycles and force in cyclic testing that caused failure of flexor tendon repairs was 134 cycles and 31 N for tendons repaired with looped 3-0 suture tied with 1 knot and 94 cycles and 33 N for tendons repaired with looped 3-0 suture tied with 2 knots. Our hypothesis was disproved by the results of this study. This study suggests that, when using looped suture, tying 2 independent knots instead of tying a single knot does not increase the strength of the flexor tendon repair. Copyright © 2016 American Society for Surgery of the Hand. Published by Elsevier Inc. All rights reserved.

Return to Beringia: parasites reveal cryptic biogeographic history of North American pikas

USDA-ARS?s Scientific Manuscript database

As a dispersal corridor between the northern continents, the Bering Land Bridge played a key role in shaping Holarctic biotas. The Beringian paradigm identifies the land bridge as a zone of predominantly eastward expansion from Eurasia and a staging area for subsequent colonization of lower latitude...

Does vascular stapling improve compliance of vascular anastomoses?

PubMed

Stansby, G; Knez, P; Berwanger, C S; Nelson, K; Reichert, V; Schmitz-Rixen, T

2001-01-01

Elastic properties of vessel walls are altered by vascular anastomoses. Such alterations may lead to neointimal hyperplasia, which is a common cause of reocclusion following vascular surgery. The severity of paraanastomotic hypercompliant zones and anastomotic compliance drop depend on suturing material and on elastic properties of the anastomotic vessel segments. This study compares paraanastomotic hypercompliance and anastomotic compliance drop when using a new vascular closure system (VCS) and a conventional, continuous suture line in the preparation of end-to-end anastomoses. Compliance of artery-artery, vein-artery, and polytetrafluoroethylene-artery anastomoses was measured in an artificial circulation system at mean pressures of 60, 90, and 120 mm Hg, comparing conventional suturing and the VCS. When using the VCS for vein-artery anastomoses, significantly less postanastomotic hypercompliance was achieved at mean pressures of 60 mm Hg (14.2 +/-3.8% above remote postanastomotic area), compared to suture (55.1 +/-14.8%, p<0.05). At 90 mm Hg, respective values were 11.0 +/-2.3% for VCS and 54.7 +/-10.1% for suture, p<0.01. At 120 mm Hg, in polytetrafluoroethylene-artery anastomoses, the anastomotic compliance drop was significantly less when using the continuous suture line (93.9 +/-1.1% below remote postanastomotic compliance), compared to VCS (97.2 +/-0.2%, p<0.05). Compared to conventional suturing, use of the VCS reduced postanastomotic hypercompliance in vein-artery anastomoses.

Spatial evolution of Zagros collision zone in Kurdistan, NW Iran: constraints on Arabia-Eurasia oblique convergence

NASA Astrophysics Data System (ADS)

Sadeghi, Shahriar; Yassaghi, Ali

2016-04-01

Stratigraphy, detailed structural mapping and a crustal-scale cross section across the NW Zagros collision zone provide constraints on the spatial evolution of oblique convergence of the Arabian and Eurasian plates since the Late Cretaceous. The Zagros collision zone in NW Iran consists of the internal Sanandaj-Sirjan, Gaveh Rud and Ophiolite zones and the external Bisotoun, Radiolarite and High Zagros zones. The Main Zagros Thrust is the major structure of the Zagros suture zone. Two stages of oblique deformation are recognized in the external part of the NW Zagros in Iran. In the early stage, coexisting dextral strike-slip and reverse dominated domains in the Radiolarite zone developed in response to deformation partitioning due to oblique convergence. Dextral-reverse faults in the Bisotoun zone are also compatible with oblique convergence. In the late stage, deformation partitioning occurred during southeastward propagation of the Zagros orogeny towards its foreland resulting in synchronous development of orogen-parallel strike-slip and thrust faults. It is proposed that the first stage was related to Late Cretaceous oblique obduction, while the second stage resulted from Cenozoic collision. The Cenozoic orogen-parallel strike-slip component of Zagros oblique convergence is not confined to the Zagros suture zone (Main Recent Fault) but also occurred in the external part (Marekhil-Ravansar fault system). Thus, it is proposed that oblique convergence of Arabian and Eurasian plates in Zagros collision zone initiated with oblique obduction in the Late Cretaceous followed by oblique collision in the late Tertiary, consistent with global plate reconstructions.

Imaging high-pressure rock exhumation along the arc-continent suture in eastern Taiwan

NASA Astrophysics Data System (ADS)

Brown, Dennis; Feng, Kuan-Fu; Wu, Yih-Min; Huang, Hsin-Hua

2015-04-01

Imaging high-pressure rock exhumation in active tectonic settings is considered to be one of the important observations that could potentially help to move forward the understanding of how this process works. Petrophysical analyses carried out along a high velocity zone imaged by seismic travel time tomography along the suture zone between the actively colliding Luzon Arc and the southeastern margin of Eurasia in Taiwan suggests that high-pressure rocks are being exhumed from at least a depth of 50 km below the arc-continent suture to the shallow subsurface where they coincide with an outcropping tectonic mélange called the Yuli Belt. The Yuli Belt comprises mainly greenschist facies quartz-mica schist, with lesser metabasite, metamorphosed mantle fragments and, importantly, minor blueschist. Modeling of published data bases of measured seismic velocities for a large suite of rocks suggests that all of the Yuli belt lithologies fit well with the measured Vp, Vs, and Vp/Vs at ambient pressures and temperatures (a 20 oC/km geotherm is used) from 10 to about 20 km depth. With the exception of hornblendite, mantle rocks need 30% to 40 % serpentinization to approximate the in situ range of Vp and and Vs at these depths. From about 20 km to 30 km, most continental crust and volcanic arc lithologies move out of the range of velocities measured by the tomography model at these depths. Blueschist (including the calculated Vp and Vs for the Yuli Belt samples), pyroxenite, and harzburgite, lherzolite, and dunite with around 20% to 30% serpentinization now enter into the range of velocities for these depths. From 40 km to 50 km depth, the mantle rocks pyroxenite, and weakly to unserpentinized harzburgite, lherzolite, and dunite, together with mafic eclogite velocities best fit the range of Vp, Vs and Vp/Vs at these depths. Seismicity along the arc-continent suture, the upper bounding fault of the high velocity zone examined here, indicate that it is a moderately oblique-slip thrust. The western boundary is a near vertical, sharp velocity gradient that, in the upper 10 to 15 km appears to link with a sinistral strike-slip fault. The high velocity zone itself is very seismically active down to a depth of 50 km. Focal mechanisms determined from within the high velocity zone are mostly strike-slip, oblique-slip, and extensional, with rare thrust mechanisms.

Geophysical and petrological modeling of the lower crust and uppermost mantle in the Variscan and Proterozoic surroundings of the Trans-European Suture Zone in Central Europe

NASA Astrophysics Data System (ADS)

Puziewicz, Jacek; Polkowski, Marcin; Grad, Marek

2017-04-01

High-quality seismic data on the lower crust and uppermost lithospheric mantle in the Central European part of the Trans European Suture Zone, together with thermal and gravimetric data, enables the quantitative modeling of the rocks occurring in those parts of the lithosphere, including their mineral compositions and the chemical composition of individual minerals. The P3 seismic profile is located at the SW margin of the East European Craton. The lower crust is dominated by gabbronoritic intrusions (plagioclase An45Ab55, clinopyroxene Di80Hed20, orthopyroxene En74Fs26), and the uppermost mantle is harzburgitic (olivine and orthopyroxene Mg# 0.91). The lower crust and upper mantle of the P1 seismic profile belong to the Trans European Suture Zone, albeit the upper crust is of Variscan affinity. The P1 lower crust has gabbronoritic composition which is layered from plagioclase-rich compositions on the top to the orthopyroxene-rich ones at the bottom (plagioclase An45Ab55, clinopyroxene Di80Hed20, orthopyroxene En85Fs15), and is lithologically different Proterozoic and Variscan surroundings. The 100 × 200 km eclogite slice (garnet Alm48Gr25Py27, clinopyroxene Di51Hed10Jd39), with a thickness of 5-10 km, occurs in the uppermost mantle sampled by the P1 profile. The Niedźwiedź Massif is located at the NE margin of the Bohemian Massif, which shows an exposed Variscan basement. The lower crust beneath the Niedźwiedź Massif consists of gabbroic rock of variable proportions of plagioclase (An45Ab55) and clinopyroxene (Di80Hed20), whereas the uppermost mantle is supposedly spinel harzburgite (olivine, ortho- and clinopyroxene Mg# 0.90). Our models show that the lowermost crust and uppermost mantle of the East European Craton do not continue to the SW into the Trans European Suture Zone in its Central European section in Poland.

Magnetic properties of serpentinized peridotites from the Zedong ophiolite, Yarlung-Zangbo suture zone, SE Tibet

NASA Astrophysics Data System (ADS)

Li, Z.; Zheng, J.; Moskowitz, B. M.; Xiong, Q.; Liu, Q.

2017-12-01

Serpentinized mantle peridotites are widely supposed to be significant sources of the magnetic, gravity and seismic anomalies in mid-oceanic ridges, forearcs and suture zones. However, the relationship between the magnetic properties of variably serpentinized peridotites and the serpentinization process is still under debate. Ophiolite outcrops commonly comprise peridotites in different stages of serpentinization and these ophiolitic peridotites are ideal to investigate the magnetic signatures of suture zones. The Zedong ophiolite locates in the eastern part of the Yarlung-Zangbo suture zone, SE Tibet (China), and the peridotite massif represents the remnants of the Neo-Tethyan lithospheric mantle. The harzburgite and lherzolite samples show densities between 3.316 and 2.593 g cm-3, and vary from the freshest to >90% serpentinized peridotites. The magnetic susceptibility curves from room temperature to 700ºC mainly show the Curie temperatures of 585ºC for pure magnetite. The low-temperature (20-300 K) demagnetization curves show the Verwey transitions at 115-125 K, suggesting that magnetite is also the dominant remanence-carrying phase. The hysteresis data of the peridotites fall in the region of pseudo-single-domain (PSD) and follow the theoretical trends for mixtures of single domain (SD) and multidomain (MD) magnetite. The first-order reversal curve (FORC) diagrams suggest that the magnetite is dominantly interacting SD + PSD particles for S < 40%, and SD + PSD + MD particles for the S > 40% serpentinized samples. The susceptibility and saturation magnetization of the Zedong peridotites range from 0.9 to 30.8 × 10‒3 (SI) and 14.1 to 1318 × 10‒3 Am2 kg‒1, respectively, and both show consistent trends with increasing degrees of serpentinization. The S < 40% samples are weakly to moderately magnetic with susceptibilities increasing from 0.001 to 0.02 (SI) and follow the low-temperature serpentinization of ophiolitic peridotites, whereas the S > 40% peridotites have higher susceptibilities of 0.02-0.03 (SI) and fall in the region of abyssal peridotites. Our results suggest that the Zedong ophiolitic peridotites probably experienced a rapid production of magnetite with little or no Fe-rich brucite during the serpentinization process.

Geological and Geophysical Integration Regarding a Structural Evolution Modelling of a Suture Zone Controlled by a Cratonic Buttress - The Case of Dom Feliciano Orogenic Belt, SSE Brazil, Implications for Western Gondwana Assembly

NASA Astrophysics Data System (ADS)

Bruno, H.; Almeida, J.; Heilbron, M. C. P. L.; Salomão, M.

2017-12-01

The matters surrounding the amalgamation of tectonic blocks during the Brasiliano / Pan-African orogeny have been the main subject of study of several works in recent years. The main objective of this work is the hierarchy and discrimination of the boundaries between the known tectonic blocks, integrating geological and geophysical data. The geology of the study area is dominated by Precambrian terranes; Luís Alves Terrane, the vulcanosedimentary sequences of the Itajaí and Campo Alegre Basins, the metasedimentary sequences of the Brusque and Paranaguá Terranes and their granitic suites besides the granitoids of the Florianópolis Terrane. The shear zones and faults that separate these crustal blocks were developed during the Brasiliano / Pan-African orogenic cycle that led to the formation of the supercontinent Gondwana. These tectonic boundaries generally separate blocks of different rheology and crustal thickness. The integration of geological and geophysical data allowed the identification of important structural lineaments and crustal boundaries. The presented geodynamic model suggests that the suture between the block composed of the Brusque, Paranaguá and Florianópolis Terranes and the block composed by the Luís Alves Terrane is the Itajaí Perimbó Shear Zone, and not the Major Gercino Shear Zone as previously suggested. Considering the Itajaí Perimbó Shear Zone as the suture zone, the metassediments of the Brusque Terrane were deposited on the basement of the Florianópolis Terrane, hereby declared as part of the Angola Craton, and are correlated to the metassediments of the Paranaguá Terrane as a passive margin that in approximately ca. 650 My became active margin, functioning as a forearc basin. The oblique collision between the blocks would have occurred with the development of a dextral transpression in the Itajaí Perimbó Shear Zone, separating the Luís Alves Terrane from the Brusque Terrane, a sinistral transcurrence represented by the Palmital Shear Zone separating the Luís Alves Terrane from the Paranaguá Terrane and a frontal thrust, represented by the Icapara and Serra Negra Shear Zones, separating the already amalgamated block from the Luís Alves and Curitiba Terranes of the Paranaguá Terrane.

The Age and Geodynamic Evolution of the Metamorphic sole rocks from Izmir-Ankara-Erzıncan suture zone (Northern-Turkey)

NASA Astrophysics Data System (ADS)

Melih Çörtük, Rahmi; Faruk Çelik, Ömer; Özkan, Mutlu; Sherlock, Sarah C.; Marzoli, Andrea; Altıntaş, İsmail Emir; Topuz, Gültekin

2016-04-01

The İzmir-Ankara-Erzincan suture zone in northern Turkey is one of the major tectonic zones separating the Pontides to the North from the Anatolide-Tauride block and Kı rşehir Massif to the South. The accretionary complex of the İzmir-Ankara-Erzincan suture zone, near Artova, is composed mainly of peridotites with varying degree serpentinization, metamorphic rocks, basalt, sandstones, pelagic and neritic limestones. The metamorphic rocks are represented by amphibolite, garnet micaschit, calc-schist and marble. The metamorphic rocks were interpreted as the metamorphic sole rocks. Because; (i) They are tectonically located beneath the serpentinized peridotites. (ii) Foliation planes of both the amphibolites and mantle tectonites are parallel to each other. (iii) The metamorphic rocks are crosscut by non-metamorphic dolerite dikes which exhibite Nb and Ta depletion relative to Th enrichment on the N-MORB normalized multi-element spider diagram. The dolerite dikes display flat REE patterns (LaN/YbN=0.85-1.24). These geochemical signatures of the dolerite dikes are indicative of subduction component during their occurrences. Geochemical observations of the amphibolites suggest E-MORB- and OIB-like signatures (LaN/SmN= 1.39-3.14) and their protoliths are represented by basalt and alkali basaltic rocks. Amphiboles from the amphibolites are represented by calcic amphiboles (magnesio-hornblende, tchermakite and tremolite) and they yielded 40Ar-39Ar ages between 157.8 ± 3.6 Ma and 139 ± 11 Ma. These cooling ages were interpreted to be the intra-oceanic subduction/thrusting time of the İzmir-Ankara-Erzincan oceanic domain. This study was funded by TÜBİTAK (Project no: 112Y123).

Tectonic slicing and mixing processes along the subduction interface: The Sistan example (Eastern Iran)

NASA Astrophysics Data System (ADS)

Bonnet, G.; Agard, P.; Angiboust, S.; Monié, P.; Jentzer, M.; Omrani, J.; Whitechurch, H.; Fournier, M.

2018-06-01

Suture zones preserve metamorphosed relicts of subducted ocean floor later exhumed along the plate interface that can provide critical insights on subduction zone processes. Mélange-like units are exceptionally well-exposed in the Sistan suture (Eastern Iran), which results from the closure of a branch of the Neotethys between the Lut and Afghan continental blocks. High pressure rocks found in the inner part of the suture zone (i.e., Ratuk complex) around Gazik are herein compared to previously studied outcrops along the belt. Detailed field investigations and mapping allow the distinction of two kinds of subduction-related block-in-matrix units: a siliciclastic-matrix complex and a serpentinite-matrix complex. The siliciclastic-matrix complex includes barely metamorphosed blocks of serpentinized peridotite, radiolarite and basalt of maximum greenschist-facies grade (i.e., maximum temperature of 340 °C). The serpentinite-matrix complex includes blocks of various grades and lithologies: mafic eclogites, amphibolitized blueschists, blue-amphibole-bearing metacherts and aegirine-augite-albite rocks. Eclogites reached peak pressure conditions around 530 °C and 2.3 GPa and isothermal retrogression down to 530 °C and 0.9 GPa. Estimation of peak PT conditions for the other rocks are less-well constrained but suggest equilibration at P < 1 GPa. Strikingly similar Ar-Ar ages of 86 ± 3 Ma, along 70 km, are obtained for phengite and amphibole from fourteen eclogite and amphibolitized blueschist blocks. Ages in Gazik are usually younger than further south (e.g., Sulabest), but there is little age difference between the various kinds of rocks. These results (radiometric ages, observed structures and rock types) support a tectonic origin of the serpentinite-matrix mélange and shed light on subduction zone dynamics, particularly on coeval detachment and exhumation mechanisms of slab-derived rocks.

The timing of metamorphism in the Odenwald-Spessart basement, Mid-German Crystalline Zone

NASA Astrophysics Data System (ADS)

Will, T. M.; Schulz, B.; Schmädicke, E.

2017-07-01

New in situ electron microprobe monazite and white mica 40Ar/39Ar step heating ages support the proposition that the Odenwald-Spessart basement, Mid-German Crystalline Zone, consists of at least two distinct crustal terranes that experienced different geological histories prior to their juxtaposition. The monazite ages constrain tectonothermal events at 430 ± 43 Ma, 349 ± 14 Ma, 331 ± 16 Ma and 317 ± 12 Ma/316 ± 4 Ma, and the 40Ar/39Ar analyses provide white mica ages of 322 ± 3 Ma and 324 ± 3 Ma. Granulite-facies metamorphism occurred in the western Odenwald at c. 430 and 349 Ma, and amphibolite-facies metamorphism affected the eastern Odenwald and the central Spessart basements between c. 324 and 316 Ma. We interpret these data to indicate that the Otzberg-Michelbach Fault Zone, which separates the eastern Odenwald-Spessart basement from the Western Odenwald basement, is part of the Rheic Suture, which marks the position of a major Variscan plate boundary separating Gondwana- and Avalonia-derived crustal terranes. The age of the Carboniferous granulite-facies event in the western Odenwald overlaps with the minimum age of eclogite-facies metamorphism in the adjacent eastern Odenwald. The granulite- and eclogite-facies rocks experienced contrasting pressure-temperature paths but occur in close spatial proximity, being separated by the Rheic Suture. As high-pressure and high-temperature metamorphisms are of similar age, we interpret the Odenwald-Spessart basement as a paired metamorphic belt and propose that the adjacent high-pressure and high-temperature rocks were metamorphosed in the same subduction zone system. Juxtaposition of these rocks occurred during the final stages of the Variscan orogeny along the Rheic Suture.

A second, cryptic species of the soft coral genus Incrustatus (Anthozoa: Octocorallia: Clavulariidae) from Tierra del Fuego, Argentina, revealed by DNA barcoding

NASA Astrophysics Data System (ADS)

McFadden, Catherine S.; van Ofwegen, Leen P.

2013-03-01

The encrusting soft coral Incrustatus comauensis is a common denizen of hard substrates in the shallow sub-tidal zone from the central Chilean fjords to the Cape Horn region of southern South America. DNA barcoding of specimens collected from the Beagle Channel, Tierra del Fuego, Argentina, revealed the presence of a second, cryptic species of Incrustatus that is syntopic with I. comauensis. We describe Incrustatus niarchosi, a new species that can be distinguished morphologically from I. comauensis by differences in the microscopic ornamentation of the coenenchymal sclerites. To date, I. niarchosi n. sp. is known only from the Beagle Channel. A population of I. comauensis discovered in the intertidal zone in eastern Tierra del Fuego represents a new record of the species for that habitat and geographic region. Although the intertidal population is also distinct genetically, it is morphologically indistinguishable from sub-tidal Chilean populations of I. comauensis, and at present, there is insufficient evidence to support its status as a separate species.

Mineral chemistry of isotropic gabbros from the Manamedu Ophiolite Complex, Cauvery Suture Zone, southern India: Evidence for neoproterozoic suprasubduction zone tectonics

NASA Astrophysics Data System (ADS)

Yellappa, T.; Tsunogae, T.; Chetty, T. R. K.; Santosh, M.

2016-11-01

The dismembered units of the Neoproterozoic Manamedu Ophiolite Complex (MOC) in the Cauvery Suture Zone, southern India comprises a well preserved ophiolitic sequence of ultramafic cumulates of altered dunites, pyroxenites, mafic cumulates of gabbros, gabbro-norites and anorthosites in association with plagiogranites, isotropic gabbros, metadolerites, metabasalts/amphibolites and thin layers of ferruginous chert bands. The isotropic gabbros occur as intrusions in association with gabbroic anorthosites, plagiogranite and metabasalts/amphibolites. The gabbros are medium to fine grained with euhedral to subhedral orthopyroxenes, clinopyroxenes and subhedral plagioclase, together with rare amphiboles. Mineral chemistry of isotropic gabbros reveal that the clinopyroxenes are diopsidic to augitic in composition within the compositional ranges of En(42-59), Fs(5-12), Wo(31-50). They are Ca-rich and Na poor (Na2O < 0.77 wt%) characterized by high-Mg (Mg# 79-86) and low-Ti (TiO2 < 0.35 wt%) contents. The tectonic discrimination plots of clinopyroxene data indicate island arc signature of the source magma. Our study further confirms the suprasubduction zone origin of the Manamedu ophiolitic suite, associated with the subduction-collision history of the Neoproterozoic Mozambique ocean during the assembly of Gondwana supercontinent.

The mafic-ultramafic complex of Aniyapuram, Cauvery Suture Zone, southern India: Petrological and geochemical constraints for Neoarchean suprasubduction zone tectonics

NASA Astrophysics Data System (ADS)

Yellappa, T.; Venkatasivappa, V.; Koizumi, T.; Chetty, T. R. K.; Santosh, M.; Tsunogae, T.

2014-12-01

Several Precambrian mafic-ultramafic complexes occur along the Cauvery Suture Zone (CSZ) in Southern Granulite Terrain, India. Their origin, magmatic evolution and relationship with the associated high-grade rocks have not been resolved. The Aniyapuram Mafic-Ultramafic Complex (AMUC), the focus of the present study in southern part of the CSZ, is dominantly composed of peridotites, pyroxenites, gabbros, metagabbros/mafic granulites, hornblendites, amphibolites, plagiogranites, felsic granulites and ferruginous cherts. The rock types in the AMUC are structurally emplaced within hornblende gneiss (TTG) basement rocks and are highly deformed. The geochemical signature of the amphibolites indicates tholeiitic affinity for the protolith with magma generation in island arc-setting. N-MORB normalized pattern of the amphibolites show depletion in HFS-elements (P, Zr, Sm, Ti, and Y) and enrichment of LIL-elements (Rb, Ba, Th, Sr) with negative Nb anomalies suggesting involvement of subduction component in the depleted mantle source and formation in a supra-subduction zone tectonic setting. Our new results when correlated with the available age data suggest that the lithological association of AMUC represent the remnants of the Neoarchean oceanic lithosphere.

High resolution image of uppermost mantle beneath NE Iran continental collision zone

NASA Astrophysics Data System (ADS)

Motaghi, K.; Tatar, M.; Shomali, Z. H.; Kaviani, A.; Priestley, K.

2012-10-01

We invert 3775 relative P wave arrival times using the ACH damped least square method of Aki et al. (1977) to study upper mantle structure beneath the NE Iran continental collision zone. The data for this study were recorded by 17 three component broad-band stations operated from August 2006 to February 2008 along a profile from the center of Iranian Plateau, near Yazd, to the northeastern part of Iran on the Turan Platform just north of the Kopeh Dagh Mountains. The results confirm the previously known low velocity upper mantle beneath Central Iran. Our tomographic model reveals a deep high velocity anomaly. The surficial expressions of this anomaly are between the Ashkabad and Doruneh Faults, where the resolution and ray coverage are good. A transition zone in uppermost mantle is recognized under the Binalud foreland that we interpreted as suture zone between Iran and Turan platform. Our results indicate that Atrak Valley which is the boundary between the Binalud and Kopeh Dagh Mountains can be considered as the northeastern suture of the Iranian Plateau where Eurasia and Turan Platform under-thrust beneath the Binalud range and Central Iran.

Pressure-Temperature Studies and Structural Setting of Amphibolite-Grade Rocks Within the Easternmost Indus-Ysangpo Suture Zone and Forearc Complex (Tidding Formation), N. Indo-Burma Ranges of N.E. India

NASA Astrophysics Data System (ADS)

Braza, M.; Haproff, P. J.

2016-12-01

The easternmost extension of the Indus-Ysangpo suture (IYS) and Xigaze forearc complex, the Tidding Formation of northeastern India, remains the least-studied sequence representing closure of the Neotethys ocean and syn-tectonic sedimentation. In this study, we present P-T determinations coupled with detrital zircon U-Pb geochronology and detailed geologic mapping to uncover the depositional and metamorphic history of Tidding suture and forearc rocks during Himalayan orogenesis. Four mica schists were sampled from successive NW-SE-striking thrust sheets within the Dibang Valley of Arunachal Pradesh (N.E. India), southwest of the easternmost L. Cretaceous Gangdese batholith. Use of the garnet-muscovite-biotite-plagioclase (GMBP) thermobarometer and Ti-in-biotite thermometer on schist sample PH-1-8-13-26 yield peak conditions of 627 ± 28°C and 10.4 ± 1.1 kbar. Similarly, use of the garnet-biotite Fe-Mg exchange thermometer and garnet-aluminosilicate-silica-plagioclase (GASP) barometer yield 644 ± 50°C and 12 ± 1 kbar for schist sample PH-11-14-15-24 within the same thrust sheet. Both samples contain recrystallized quartz along grain boundaries and garnets contain no significant compositional zoning. At structurally lower levels, garnet chlorite schist (PH-1-8-13-8) sampled from the Mayodia klippe records peak temperatures below 650°C. Garnets display growth zoning, with increasing Mn and decreasing Fe and Mg from rim to core. Application of the Ti-in-biotite thermometer to a mafic schist (PH-1-3-13-1B) within the Mayodia klippe near a southwestward-directed thrust yields a peak temperature of 679 ± 24°C. Our study reveals metamorphism of IYS rocks occurred at deep crustal levels (>30 km) during northward Neotethys subduction. Suture rocks were subsequently exhumed by orogen-scale N-dipping thrusts during growth of the easternmost Himalayan orogen.

Design of the computerized 3D endoscopic imaging system for delicate endoscopic surgery.

PubMed

Song, Chul-Gyu; Kang, Jin U

2011-02-01

This paper describes a 3D endoscopic video system designed to improve visualization and enhance the ability of the surgeon to perform delicate endoscopic surgery. In a comparison of the polarized and conventional electric shutter-type stereo imaging systems, the former was found to be superior in terms of both accuracy and speed for suturing and for the loop pass test. Among the groups performing loop passing and suturing, there was no significant difference in the task performance between the 2D and 3D modes, however, suturing was performed 15% (p < 0.05) faster in 3D mode by both groups. The results of our experiments show that the proposed 3D endoscopic system has a sufficiently wide viewing angle and zone for multi-viewing.

The Precambrian terranes of Yemen and their correlation with those of Saudi Arabia and Somalia: Implications for the accretion of Gondwana

USGS Publications Warehouse

Windley, B.F.; Whitehouse, M.J.; Stoeser, D.B.; Al-Khirbash, S.; Ba-Bttat, M. A. O.; Al-Ghotbah, A.

2001-01-01

Most of the basement of Yemen consists of early Precambrian continental high-grade terranes and Neoproterozoic low-grade island arcs that were accreted together to form an arc-continent collage during the Pan-African orogeny (Windley et al., 1996; Whitehouse et al., 1998; Whitehouse et al., in press). The suture zones between the arc and gneiss terranes are major crustal- scale tectonic boundaries. The terranes are situated east of the Nabitah suture and of the collage of low-grade, mainly island arc terranes of the Arabian Shield, but they have been reworked by a Neoproterozoic event associated with island arc accretion. Further east in Yemen are mostly unconformable, very weakly deformed and very low-grade or unmetamorphosed sediments. Thus Yemen provides key information on the broad zone of Neoproterozoic reworking associated with the collisional boundary between western and eastern Gondwana. 

Uranium-Lead Zircon Ages and Sr, Nd, and Pb Isotope Geochemistry of Selected Plutonic Rocks from Western Idaho

USGS Publications Warehouse

Unruh, Daniel M.; Lund, Karen; Kuntz, Mel A.; Snee, Lawrence W.

2008-01-01

Across the Salmon River suture in western Idaho, where allochthonous Permian to Cretaceous oceanic rocks are juxtaposed against Proterozoic North American rocks, a wide variety of plutonic rocks are exposed. Available data indicate much variation in composition, source, and structural state of these plutons. The plutonic rocks were long described as the western border zone of the Cretaceous Idaho batholith but limited pre-existing age data indicate more complicated origins. Because the affinity and age of the plutonic rocks cannot be reliably determined from field relations, TIMS U-Pb dating in conjunction with Sr, Nd, and Pb isotopic studies of selected plutons across the suture in western Idaho were undertaken. The data indicate three general groups of plutons including (1) those that intruded the island arc terranes during the Triassic and Jurassic, those that intruded near the western edge of oceanic rocks along the suture in the Early Cretaceous, and the plutons of the Idaho batholith that intruded Proterozoic North American rocks in the Late Cretaceous. Plutons that intruded Proterozoic North American rocks commonly include xenocrystic zircons and in several cases, ages could not be determined. The least radiogenic Sr and most radiogenic Nd are found among the Blue Mountains superterrane island arc samples. Suture-zone plutons have isotopic characteristics that span the range between Idaho batholith and island arc samples but mostly follow island arc signatures. Plutons of the Idaho batholith have the most radiogenic initial Pb and Sr ratios and the least radiogenic Nd of the samples analyzed.

Ultramafic rocks of the western Idaho suture zone: Asbestos Peak and Misery Ridge

DOE Office of Scientific and Technical Information (OSTI.GOV)

Godchaux, M.M.; Bonnichsen, B.

1993-04-01

The Western Idaho Ultramafic Belt extends northward from the town of Weiser to the northern end of Dworshak Reservoir; in its northern portion most of the ultramafic bodies are localized along the suture zone where the Mesozoic oceanic accreted terranes meet the continental craton. Of the twenty bodies investigated, all are small, all are in fault contact with their metavolcanic and metasedimentary host rocks, all have been metamorphosed, and all display deformational fabrics in at least some portion of the outcrop area, suggesting that deformation continued after peak metamorphism. The degree of metamorphism ranges from incipient serpentinization to attainment ofmore » equilibrium in the upper amphibolite facies. Some bodies have been intruded by granitic dikes or pegmatite veins after emplacement, and have locally undergone contact metasomatism. Two particularly complex bodies, Asbestos Peak and Misery Ridge, were chosen for detailed petrographic and chemical study. Asbestos Peak is composed mostly of decussate anthophyllite-talc rock containing isolated patches of harzburgite protolith, and has blackwall border zones. Misery Ridge is composed mostly of coarse-grained sheared tremolite-talc schist without remnant protolith, and lacks true blackwall zones. Both bodies exhibit an unusual and enigmatic hornblende-poikiloblastic garnet-green spinel-skeletal ilmenite assemblage, present in some places as well-defined border zones and in other places as cross-cutting bodies.« less

Multidisciplinary approach for the characterization of a new Late Cretaceous continental arc in the Central Pontides (Northern Turkey)

NASA Astrophysics Data System (ADS)

Ellero, Alessandro; Ottria, Giuseppe; Sayit, Kaan; Catanzariti, Rita; Frassi, Chiara; Cemal Göncüoǧlu, M.; Marroni, Michele; Pandolfi, Luca

2016-04-01

In the Central Pontides (Northern Turkey), south of Tosya, a tectonic unit consisting of not-metamorphic volcanic rocks and overlying sedimentary succession is exposed inside a fault-bounded elongated block. It is restrained within a wide shear zone, where the Intra-Pontide suture zone, the Sakarya terrane and the Izmir-Ankara-Erzincan suture zone are juxtaposed as result of strike-slip activity of the North Anatolian shear zone. The volcanic rocks are mainly basalts and basaltic andesites (with their pyroclastic equivalents) associated with a volcaniclastic formation made up of breccias and sandstones that are stratigraphically overlain by a Marly-calcareous turbidite formation. The calcareous nannofossil biostratigraphy points to a late Santonian-middle Campanian age (CC17-CC21 Zones) for the sedimentary succession. The geochemistry of the volcanic rocks reveals an active continental margin setting as evidenced by the enrichment in Th and LREE over HFSE, and the Nb-enriched nature of these lavas relative to N-MORB. As highlighted by the performed arenite petrography, the occurrence of continent-derived clastics in the sedimentary succession supports the hypothesis of a continental arc-derived volcanic succession. Alternative geodynamic reconstructions are proposed, where this tectonic unit could represent a slice derived from the northern continental margin of the Intra- Pontide or Izmir-Ankara-Erzincan oceanic basins.

Lithospheric structure of the Eastern Iranian plateau from integrated geophysical modeling: A transect from Makran to the Turan platform

NASA Astrophysics Data System (ADS)

Entezar-Saadat, Vahid; Motavalli-Anbaran, Seyed-Hani; Zeyen, Hermann

2017-05-01

We present a 2D profile of density and temperature distribution in the lithosphere across Iran along a more than 1600 km long profile extending from the Oman Gulf in the South to the Kopeh-Dagh and the Turan platform in the North. Gravity, geoid, topography and surface heat flow data were used for modeling, assuming local isostatic equilibrium. As much as possible, crustal structure has been constrained by seismic data. Crustal thickening is found under the Taftan-Bazman volcanic-arc (up to 47 km), under the Binalud foreland (∼54 km) and beneath the Kopeh-Dagh mountains (up to 50 km) whereas thin crust has been obtained under the Oman Gulf (20 km). Moho depth under the Lut block and the Turan platform is about 40 km. The lithospheric thickness is ∼90 km under the Oman Gulf and increases slightly until the Jazmourian depression. Then the lithospheric-asthenospheric boundary (LAB) bends significantly and sinks to ∼260 km under the Taftan-Bazman volcanic-arc. The LAB depth is about 190 km beneath the Lut block. A slight increase of LAB depth under the Binalud foreland towards the North may indicate a suture zone. Under the Turan platform, the LAB depth reaches ∼210 km. We also modeled two possible positions of the deep suture zone in NE Iran (along the main Kopeh-Dagh fault or along the Atrak River) and concluded that, when the suture zone is along the Atrak River, we obtained the better fit between calculated and measured data.

Collision tectonics of the Central Indian Suture zone as inferred from a deep seismic sounding study

USGS Publications Warehouse

Mall, D.M.; Reddy, P.R.; Mooney, W.D.

2008-01-01

The Central Indian Suture (CIS) is a mega-shear zone extending for hundreds of kilometers across central India. Reprocessing of deep seismic reflection data acquired across the CIS was carried out using workstation-based commercial software. The data distinctly indicate different reflectivity characteristics northwest and southeast of the CIS. Reflections northwest of the CIS predominantly dip southward, while the reflection horizons southeast of the CIS dip northward. We interpret these two adjacent seismic fabric domains, dipping towards each other, to represent a suture between two crustal blocks. The CIS itself is not imaged as a sharp boundary, probably due to the disturbed character of the crust in a 20 to 30-km-wide zone. The time sections also show the presence of strong bands of reflectors covering the entire crustal column in the first 65??km of the northwestern portion of the profile. These reflections predominantly dip northward creating a domal structure with the apex around 30??km northwest of the CIS. There are a very few reflections in the upper 2-2.5??s two-way time (TWT), but the reflectivity is good below 2.5??s TWT. The reflection Moho, taken as the depth to the deepest set of reflections, varies in depth from 41 to 46??km and is imaged sporadically across the profile with the largest amplitude occurring in the northwest. We interpret these data as recording the presence of a mid-Proterozoic collision between two micro-continents, with the Satpura Mobile Belt being thrust over the Bastar craton. ?? 2008.

The Architecture of A Variscan Collisional Crust, As Revealed By The Iberseis Seismic Reflection Profile In Southwest Iberia

NASA Astrophysics Data System (ADS)

Simancas, F.; Carbonell, R.; Gonzalez-Lodeiro, F.; Perez-Estaun, A.; Ayarza, P.; Juhlin, C.; Azor, A.; Saez, R.; Martinez-Poyatos, D.; Pascual, E.

The recently acquired IBERSEIS Seismic Reflection Profile runs across major do- mains of the Variscan Orogen in SW Iberia. Geological studies indicate that the seis- mically surveyed region has been built up from three terranes, namely the South Por- tuguese Zone (SPZ), the Ossa-Morena Zone (OMZ) and the Central Iberian Zone (CIZ). These terranes became sutured after a complex, mainly transpressive (left- lateral), collisional history in Devonian-Carboniferous time. The deep seismic reflec- tion profile IBERSEIS has successfully imaged the sutures between these terranes as well as the structure of their crust. The following main features emerge from the pre- liminary integration of seismic and geological data: 1) The suture between the SPZ and OMZ terranes, marked by oceanic amphibolites, appears at present as a north- dipping left-lateral thrust merging in a mid-crustal detachment; the continuity of this suture-contact in the lower crust is not well defined in the seismic image. 2) The OMZ/CIZ suture, a shear zone with eclogites, is clearly imaged in the upper crust as a band of reflectivity dipping to the NE which, after a flat geometry in the middle crust, may continue downwards to the Moho as NE-dipping lower crustal reflections. 3) The SPZ upper crust has an imbricate structure merging into a mid-crustal detachment at constant depth in the surveyed profile. 4) The structure of the OMZ upper crust is dominated by large-scale recumbent folds affected by late upright folds, as fore- seen by geology and fully confirmed by the seismic image. 5) A general mid-crustal detachment exists in the whole surveyed area, whose geometry varies from a sharp detachment-level in the SPZ to a pinching and swelling horizontal band of reflectivity -a melting layer?- in the OMZ; in any case, a strong decoupling between upper and lower crust characterizes this transect of the Variscan orogen. 6) The lower crust of the SPZ has an intense seismic fabric, in accordance with the consideration of this ter- rane as an external orogenic domain with discrete shear bands preserved in the whole crust. 7) The lower crust of the OMZ is much less reflective than the lower crust of the SPZ. 8) The Moho is flat all along the surveyed area, which means that crustal 1 roots formed during the collisional processes were eliminated later on, probably in Late Carboniferous-Permian times. Despite the disturbance due to the generation of a post-orogenic flat Moho, the IBERSEIS seismic image seems to be a good snapshot of the Variscan collision, with very minor reworking by alpine processes. 2

The "Floating Labrum": Bankart Lesion Repair With Anterior Capsular Extension Using 2 Anterior Working Portals.

PubMed

Rao, Allison J; Verma, Nikhil N; Trenhaile, Scott W

2017-10-01

Surgical repair of a Bankart lesion requires thorough recognition of the capsulolabral attachment and adequate visualization for suture anchor repair. The glenoid labrum usually detaches from its capsule and bony attachment anteriorly and inferiorly; however, the labral and capsule detachment can sometimes extend beyond this zone of injury. Identification and repair may require additional viewing and working portals to allow for ease of suture passage and anchor placement. This technique guide describes a case scenario of a Bankart lesion with anterior extension of the capsular tear, repaired with use of 2 anterior working portals.

Geologic evolution of the Kastel trough and its implications on the Adiyaman oil fields, SE Turkey

DOE Office of Scientific and Technical Information (OSTI.GOV)

Coskun, Bu.

1990-05-01

Oil field developments of the Adiyaman area one of the main oil producing zones in southeast Turkey, have been highly influenced by geologic evolution of the Kastel trough which is situated in front of the suture zone between the Arabian and Anatolian plates. The Upper Cretaceous movements created many paleostructural trends in the Kastel trough where important dolomitic and porous reservoirs exist. The most important tectonic event, which appeared during the Upper Cretaceous movements, is the accumulation of the Kocali-Karadut ophiolitic complex, advancing from the north to the south in the Kastel trough, where heavy materials caused formation of amore » structural model favoring generation and migration and entrapment of oil in the reservoir rocks. Due to the presence of the Kocali-Karadut complex in the Kastel trough the following zones have been distinguished. (1) North Uplift Area. Situated under the allochthonous units, many thrust and reverse faults characterize this zone. The presence of paleohighs, where primary dolomites develop, allows the appearance of some oil fields in the region. This is the main future exploration zone in southeast Turkey. (2) Accumulation Area. Advancing from the north to the south, the allochthonous Kocali-Karadut complex filled the Kastel trough creating a deep graben whose flanks present generally normal faults. (3) Structural Belt. Important paleohighs constitute an exploration trend in this zone where dolomitic and porous carbonates contain actual oil fields. (4) South Accumulation Area. Distant from the Arabian-Anatolian suture zone, regional tectonics and sedimentology show this zone remained deeply buried during geologic time; good source rocks were deposited during the Cretaceous. (5) South Uplift Area. This area corresponds to the northern flank of the huge regional Mardin high in southeast Turkey where new oil fields have been discovered.« less

Precambrian basement geologic map of Montana; an interpretation of aeromagnetic anomalies

USGS Publications Warehouse

Sims, P.K.; O'Neill, J. M.; Bankey, Viki; Anderson, E.

2004-01-01

Newly compiled aeromagnetic anomaly data of Montana, in conjunction with the known geologic framework of basement rocks, have been combined to produce a new interpretive geologic basement map of Montana. Crystalline basement rocks compose the basement, but are exposed only in the cores of mountain ranges in southwestern Montana. Principal features deduced from the map are: (1) A prominent northeast-trending, 200-km-wide zone of spaced negative anomalies, which extends more than 700 km from southwestern Montana's Beaverhead Mountains to the Canadian border and reflects suturing of the Archean Mexican Hat Block against the Archean Wyoming Province along the Paleoproterozoic Trans-Montana Orogen (new name) at about 1.9-1.8 Ga; (2) North-northwest-trending magnetic lows in northeastern Montana, which reflect the 1.9-1.8 Ga Trans-Hudson Orogen and truncate the older Trans-Montana Zone; and (3) Subtle northwest- and west-trending negative anomalies in central and western Montana, which represent the northernmost segment of brittle-ductile transcurrent faults of the newly recognized Mesoproterozoic Trans-Rocky Mountain fault system. Structures developed in the Proterozoic provided zones of crustal weakness reactivated during younger Proterozoic and Phanerozoic igneous and tectonic activity. For example, the Trans-Montana Zone guided basement involved thrust faulting in southwestern Montana during the Sevier Orogeny. The Boulder Batholith and associated ore deposits and the linear belt of alkaline intrusions to the northeast were localized along a zone of weakness between the Missouri River suture and the Dillon shear zone of the Trans-Montana Orogen. The northwest-trending faults of Trans-Rocky Mountain system outline depocenters for sedimentary rocks in the Belt Basin. This fault system provided zones of weakness that guided Laramide uplifts during basement crustal shortening. Northwest-trending zones have been locally reactivated during Neogene basin-range extension.

Arthroscopic pullout repair of a complete radial tear of the tibial attachment site of the medial meniscus posterior horn.

PubMed

Kim, Young-Mo; Rhee, Kwang-Jin; Lee, June-Kyu; Hwang, Deuk-Soo; Yang, Jun-Young; Kim, Sung-Jae

2006-07-01

We developed an effective arthroscopic pullout technique for repairing complete radial tears of the tibial attachment site of the medial meniscus posterior horn (MMPH). In our technique, the torn meniscus is reattached to the tibial plateau immediately medial or anteromedial to the posterior cruciate ligament (PCL) using two No. 2 Ethibond sutures (Ethicon, Somerville, NJ). After a complete radial tear of the tibial attachment site of the MMPH and its reparability were confirmed, using a Caspari suture loaded with a suture shuttle, one No. 2 Ethibond suture is placed through the meniscus, through the red-red zone, 3 to 5 mm medial to the torn edge of the MMPH, and the other is passed through the meniscocapsular junction 3 to 5 mm medial to the torn edge of the meniscus. Then, a tibial tunnel, 5-mm in diameter, is made from the anteromedial aspect of the proximal tibia to the previously prepared tibial plateau, immediately medial or anteromedial to the PCL, and the two No. 2 Ethibond sutures are pulled out through the tibial tunnel and then fixed to the proximal tibia using a 3.5-mm cortical screw and washer. Firm reattachment of the torn meniscus was confirmed arthroscopically.

Geodynamic models of the Wilson Cycle: From rifts to mountains to rifts

NASA Astrophysics Data System (ADS)

Buiter, Susanne; Tetreault, Joya; Torsvik, Trond

2015-04-01

The Wilson Cycle theory that oceans close and reopen along the former suture is a fundamental concept in plate tectonics. The theory suggests that subduction initiates at a passive margin, closing the ocean, and that future continental extension localises at the ensuing collision zone. Each stage of the Wilson Cycle will therefore be characterised by inherited structural and thermal heterogeneities. Here we investigate the role of Wilson Cycle inheritance by considering the influence of (1) passive margin structure on continental collision and (2) collision zones on passive margin formation. Passive margins may be preferred locations for subduction initiation because inherited faults and areas of exhumed serpentinized mantle may weaken a margin enough to localise shortening. If subduction initiates at a passive margin, the shape and structure of the passive margins will affect future continental collision. Our review of present-day passive margins along the Atlantic and Indian Oceans reveals that most passive margins are located on former collision zones. Continental break-up occurs on relatively young sutures, such as Morocco-Nova Scotia, and on very old sutures, such as the Greenland-Labrador and East Antarctica-Australia systems. This implies that it is not always post-collisional collapse that initiates the extensional phase of a Wilson Cycle. We highlight the impact of collision zone inheritance on continental extension and rifted margin architecture. We show numerical experiments of one Wilson Cycle of subduction, collision, and extension. Subduction initiates at a tapered passive margin. Closure of a 60 Ma ocean leads to continental collision and slab break-off, followed by some tens of kilometres of slab eduction. Mantle flow above the sinking detached slab enhances deformation in the rift area. The resulting rift exposes not only continental crust, but also subduction-related sediments and oceanic crust remnants. Renewed subduction in the post-collision phase is enabled by lithosphere delamination and slab rollback, leading to back-arc extension in a style similar to the Tyrrhenian Sea.

Geologic map of the Morena Reservoir 7.5-minute quadrangle, San Diego County, California

USGS Publications Warehouse

Todd, Victoria R.

2016-06-01

IntroductionMapping in the Morena Reservoir 7.5-minute quadrangle began in 1980, when the Hauser Wilderness Area, which straddles the Morena Reservoir and Barrett Lake quadrangles, was mapped for the U.S. Forest Service. Mapping was completed in 1993–1994. The Morena Reservoir quadrangle contains part of a regional-scale Late Jurassic(?) to Early Cretaceous tectonic suture that coincides with the western limit of Jurassic metagranites in this part of the Peninsular Ranges batholith (PRB). This suture, and a nearly coincident map unit consisting of metamorphosed Cretaceous and Jurassic back-arc basinal volcanic and sedimentary rocks (unit KJvs), mark the boundary between western, predominantly metavolcanic rocks, and eastern, mainly metasedimentary, rocks. The suture is intruded and truncated by the western margin of middle to Late Cretaceous Granite Mountain and La Posta plutons of the eastern zone of the batholith.

Repair of a complete radial tear in the midbody of the medial meniscus using a novel crisscross suture transtibial tunnel surgical technique: a case report.

PubMed

James, Evan W; LaPrade, Christopher M; Feagin, John A; LaPrade, Robert F

2015-09-01

Complete radial meniscus tears have been reported to result in deleterious effects in the knee joint if left unrepaired. An emphasis on meniscal preservation is important in order to restore native meniscal function. In this case report, a complete radial tear of the medial meniscus midbody was repaired using a novel crisscross suture transtibial technique. This technique secured the anterior and posterior meniscal horns, which were released from their extruded and scarred position along the capsule, using crisscrossing sutures passed through two transtibial tunnels and secured over a bone bridge on the anterolateral tibia. In addition, the repair was supplemented with the injection of platelet-rich plasma and bone marrow aspirate concentrate to promote the healing of the meniscal tissue. Complete healing on second-look arthroscopy is presented, including in the previously unreported white-white meniscal zone.

[Arthroscopic refixation of acute proximal anterior cruciate ligament rupture using suture anchors].

PubMed

Achtnich, A; Rosslenbroich, S; Beitzel, K; Imhoff, A B; Petersen, W

2017-04-01

Arthroscopic assisted suture anchor refixation combined with microfracturing of the femoral ACL insertion zone in cases of acute proximal anterior cruciate ligament (ACL) rupture to restore anatomical and biomechanical properties of the native ACL. Acute proximal ACL rupture/avulsion, multiligament injury of the knee CONTRAINDICATIONS: Chronic (>6 weeks) proximal ACL rupture, intraligamentary rupture, as well as previous ACL surgery. Arthroscopic examination of the knee joint, debridement of the femoral insertion zone, examination of the ligament quality by a probe, insertion of a curved lasso through the ACL to place the sutures and use of a drill guide to place the anchor in the middle of the femoral ACL insertion. Microfracturing holes around the femoral footprint were made by an awl to enhance healing properties of the ACL. Partial weight bearing was permitted and crutches were used for 6 weeks, knee brace limited for the first 2 weeks 0‑0-0°, then 0‑0-90° for the following 4 weeks. A total of 20 patients who underwent acute proximal ACL suture anchor refixation were evaluated after a mean follow-up of 28 months. Regarding stability, mean values of the KT-1000 arthrometer indicated stable results (<3 mm), 3 patients had a 1+ Lachman and 4 patients had a 1+ pivot shift. IKDC (International Knee Documentation Committee) score indicated that 17 cases were very good to good (12A, 4B) and in 3 cases the results were satisfactory (3C). Magnetic resonance imaging showed that the ALC was found to be intact in 17 cases. The total rate of revision was 15 % (3/20) because of recurrent instability.

Petrogenesis of granitoids and associated xenoliths in the early Paleozoic Baoxu and Enping plutons, South China: Implications for the evolution of the Wuyi-Yunkai intracontinental orogen

NASA Astrophysics Data System (ADS)

Yu, Yang; Huang, Xiao-Long; Sun, Min; He, Peng-Li

2018-05-01

The early Paleozoic Wuyi-Yunkai orogen was associated with extensive felsic magmatic activities and the orogenic core was mainly distributed in the Yunkai and Wugong domains located in the western Cathaysia block and in the Wuyi domain located in the central part of the Cathaysia block. In order to investigate the evolution of the Wuyi-Yunkai orogen, elemental and Sr-Nd isotopic analyses were performed for granites from the Baoxu pluton in the Yunkai domain and from the Enping pluton in the central part of the Cathaysia block. The Baoxu pluton consists of biotite granite with abundant xenoliths of gneissic granite, granodiorite and diorite, and the Enping pluton is mainly composed of massive granodiorite. Biotite granites (441 ± 5 Ma) and gneissic granite xenolith (443 ± 4 Ma) of the Baoxu pluton are all weakly peraluminous (A/CNK = 1.05-1.10). They show high Sr/Y and La/Yb ratios and have negative bulk-rock εNd(t) values (-7.0 to -4.4), which are similar to coeval gneissic S-type granites in the Yunkai domain and were probably derived from dehydration melting of a sedimentary source with garnet residue in the source. Granodiorites (429 ± 3 Ma) from Enping and granodiorite xenolith (442 ± 4 Ma) from Baoxu are metaluminous and have REE patterns with enriched light REE and flat middle to heavy REE, possibly generated by the dehydration melting of an igneous basement at middle to lower crustal level. Diorite xenolith from Baoxu is ultrapotassic (K2O = 4.9 wt%), has high contents of MgO (7.0 wt%), Cr (379 ppm) and Ni (171 ppm) and shows pronounced negative Nb, Ta and Ti anomalies. This xenolith also has negative εNd(t) value (-3.6) and low Rb/Ba and high Ba/Sr ratios, and is thus interpreted to be derived from an enriched lithospheric mantle with the breakdown of phlogopite. Early Paleozoic I- and S-type granites in the Wuyi-Yunkai orogen mostly have negative εNd(t) values and do not have juvenile components, consistent with genesis by an intracontinental orogenic event. These early Paleozoic granites occur near the ancient suture zone between the Yangtze and Cathaysia blocks and have high La/Yb and Sr/Y ratios, likely due to the existence of residual garnet in the source, suggesting the thickened crust at ca. 440 Ma. The 450-440 Ma gneissic S-type granites near the suture zone are earlier than those in the central part of the Cathaysia block (∼430 Ma). The crustal thickening along the ancient suture zone at 440 Ma propagated into the central part of the Cathaysia block as evidenced by the 430 Ma granites. Early Paleozoic I-type granites near the suture zone clearly show involvement of significant mantle-derived materials, in contrast to granites in the central part of the Cathaysia block. The ancient suture zone may have acted as channels for the emplacement of mafic magmas during the collapse of an intracontinental orogen.

Crustal structure of Wrangellia and adjacent terranes inferred from geophysical studies along a transect through the northern Talkeetna Mountains

USGS Publications Warehouse

Glen, J.M.G.; Schmidt, J.; Pellerin, L.; McPhee, D.K.; O'Neill, J. M.

2007-01-01

Recent investigations of the Talkeetna Mountains in south-central Alaska were undertaken to study the region's framework geophysics and to reinterpret structures and crustal composition. Potential field (gravity and magnetic) and magnetotelluric (MT) data were collected along northwest-trending profiles as part of the U.S. Geological Survey's Talkeetna Mountains transect project. The Talkeetna Mountains transect area comprises eight 1:63,360 quadrangles (???9500 km2) in the Healy and Talkeetna Mountains 1?? ?? 3?? sheets that span four major lithostratigraphic terranes (Glen et al., this volume) including the Wrangellia and Peninsular terranes and two Mesozoic overlap assemblages inboard (northwest) of Wrangellia. These data were used here to develop 21/2-dimensional models for the three profiles. Modeling results reveal prominent gravity, magnetic, and MT gradients (???3.25 mGal/ km, ???100nT/km, ???300 ohm-m/km) corresponding to the Talkeetna Suture Zone-a first-order crustal discontinuity in the deep crust that juxtaposes rocks with strongly contrasting rock properties. This discontinuity corresponds with the suture between relatively dense magnetic crust of Wrangellia (likely of oceanic composition) and relatively less dense transitional crust underlying Jurassic to Cretaceous flysch basins developed between Wrangellia and North America. Some area of the oceanic crust beneath Wrangellia may also have been underplated by mafic material during early to mid-Tertiary volcanism. The prominent crustal break underlies the Fog Lakes basin approximately where theTalkeetna thrust faultwaspreviouslymappedas a surface feature. Potential fieldand MT models, however, indicate that the Talkeetna Suture Zone crustal break along the transect is a deep (2-8 km), steeply west-dipping structure-not a shallow east-dipping Alpine nappe-like thrust. Indeed, most of the crustal breaks in the area appear to be steep in the geophysical data, which is consistent with regional geologic mapping that indicates that most of the faults are steep normal, reverse, strike-slip, or oblique-slip faults. Mapping further indicates that many of these features, which likely formed during Jurassic and Cretaceous time, such as the Talkeetna Suture Zone have reactivated inTertiary time (O'Neill et al., 2005). Copyright ?? 2007 The Geological Society of America.

Carboniferous and Permian evolutionary records for the Paleo-Tethys Ocean constrained by newly discovered Xiangtaohu ophiolites from central Qiangtang, central Tibet

NASA Astrophysics Data System (ADS)

Zhang, Xiu-Zheng; Dong, Yong-Sheng; Wang, Qiang; Dan, Wei; Zhang, Chunfu; Deng, Ming-Rong; Xu, Wang; Xia, Xiao-Ping; Zeng, Ji-Peng; Liang, He

2016-07-01

Reconstructing the evolutionary history of the Paleo-Tethys Ocean remains at the center of debates over the linkage between Gondwana dispersion and Asian accretion. Identifying the remnants of oceanic lithosphere (ophiolites) has very important implications for identifying suture zones, unveiling the evolutionary history of fossil oceans, and reconstructing the amalgamation history between different blocks. Here we report newly documented ophiolite suites from the Longmu Co-Shuanghu Suture zone (LSSZ) in the Xiangtaohu area, central Qiangtang block, Tibet. Detailed geological investigations and zircon U-Pb dating reveal that the Xiangtaohu ophiolites are composed of a suite of Permian (281-275 Ma) ophiolites with a nearly complete Penrose sequence and a suite of Early Carboniferous (circa 350 Ma) ophiolite remnants containing only part of the lower oceanic crust. Geochemical and Sr-Nd-O isotopic data show that the Permian and Carboniferous ophiolites in this study were derived from an N-mid-ocean ridge basalts-like mantle source with varied suprasubduction-zone (SSZ) signatures and were characterized by crystallization sequences from wet magmas, suggesting typical SSZ-affinity ophiolites. Permian and Carboniferous SSZ ophiolites in the central Qiangtang provide robust evidence for the existence and evolution of an ancient ocean basin. Combining with previous studies on high-pressure metamorphic rocks and pelagic radiolarian cherts, and with tectonostratigraphic and paleontological data, we support the LSSZ as representing the main suture of the Paleo-Tethys Ocean which probably existed and evolved from Devonian to Triassic. The opening and demise of the Paleo-Tethys Ocean dominated the formation of the major framework for the East and/or Southeast Asia.

Upper mantle structure across the Trans-European Suture Zone imaged by S-receiver functions

NASA Astrophysics Data System (ADS)

Knapmeyer-Endrun, Brigitte; Krüger, Frank; Geissler, Wolfram H.; Passeq Working Group

2017-01-01

We present a high-resolution study of the upper mantle structure of Central Europe, including the western part of the East European Platform, based on S-receiver functions of 345 stations. A distinct contrast is found between Phanerozoic Europe and the East European Craton across the Trans-European Suture Zone. To the west, a pronounced velocity reduction with depth interpreted as lithosphere-asthenosphere boundary (LAB) is found at an average depth of 90 km. Beneath the craton, no strong and continuous LAB conversion is observed. Instead we find a distinct velocity reduction within the lithosphere, at 80-120 km depth. This mid-lithospheric discontinuity (MLD) is attributed to a compositional boundary between depleted and more fertile lithosphere created by late Proterozoic metasomatism. A potential LAB phase beneath the craton is very weak and varies in depth between 180 and 250 km, consistent with a reduced velocity contrast between the lower lithosphere and the asthenosphere. Within the Trans-European Suture Zone, lithospheric structure is characterized by strong heterogeneity. A dipping or step-wise increase to LAB depth of 150 km is imaged from Phanerozoic Europe to 20-22° E, whereas no direct connection to the cratonic LAB or MLD to the east is apparent. At larger depths, a positive conversion associated with the lower boundary of the asthenosphere is imaged at 210-250 km depth beneath Phanerozoic Europe, continuing down to 300 km depth beneath the craton. Conversions from both 410 km and 660 km discontinuities are found at their nominal depth beneath Phanerozoic Europe, and the discontinuity at 410 km depth can also be traced into the craton. A potential negative conversion on top of the 410 km discontinuity found in migrated images is analyzed by modeling and attributed to interference with other converted phases.

Provenance of Mesozoic clastic rocks within the Bangong-Nujiang suture zone, central Tibet: Implications for the age of the initial Lhasa-Qiangtang collision

NASA Astrophysics Data System (ADS)

Li, Shun; Guilmette, Carl; Ding, Lin; Xu, Qiang; Fu, Jia-Jun; Yue, Ya-Hui

2017-10-01

The Bangong-Nujiang suture zone, separating the Lhasa and Qiangtang blocks of the Tibetan Plateau, is marked by remnants of the Bangong-Nujiang oceanic basin. In the Gaize area of central Tibet, Mesozoic sedimentary strata recording the evolution of the basin and subsequent collision between these two blocks include the Upper Triassic-Lower Jurassic turbidites of the Mugagangri Group, the Upper Jurassic-Lower Cretaceous sandstone-dominated Wuga and Shamuluo formations, and the Upper Cretaceous molasse deposits of the Jingzhushan Formation. The Shamuluo and Jingzhushan formations rest unconformably on the underlying Mugagangri Group and Wuga Formation, respectively. In this contribution, we analyze petrographic components of sandstones and U-Pb-Hf isotopic compositions of detrital zircons from the Wuga and Jingzhushan formations for the first time. Based on the youngest detrital zircon ages, the maximum depositional ages of the Wuga and Jingzhushan formations are suggested to be ∼147-150 Ma and ∼79-91 Ma, respectively. Petrographic and isotopic results indicate that sediments in the Wuga Formation were mainly sourced from the accretionary complex (preserved as the Mugagangri Group) in the north, while sediments in the Jingzhushan Formation have mixed sources from the Lhasa block, the Qiangtang block and the intervening suture zone. Provenance analysis, together with regional data, suggests that the Upper Jurassic-Lower Cretaceous Wuga and Shamuluo formations were deposited in a peripheral foreland basin and a residual-sea basin, respectively, in response to the Lhasa-Qiangtang collision, whereas the Upper Cretaceous Jingzhushan Formation reflects continental molasse deposition during the post-collisional stage. The development of the peripheral foreland basin evidenced by deposition of the Wuga Formation reveals that the age of the initial Lhasa-Qiangtang collision might be the latest Jurassic (∼150 Ma).

Petrology and fluid inclusions of garnet-clinopyroxene rocks from the Gondwana suture zone in southern India: Implications for prograde high-pressure metamorphism

NASA Astrophysics Data System (ADS)

Tsunogae, T.

2012-04-01

The Palghat-Cauvery Suture Zone (PCSZ) in the southern granulite terrane, India, which separates Pan-African granulite blocks (e.g., Madurai and Trivandrum Blocks) to the south and Archean terrane (e.g., Salem Block and Dharwar Craton) to the north is regarded as a major suture zone in the Gondwana collisional orogeny. It probably continues westwards to the Betsimisaraka suture in Madagascar, and eastwards into Sri Lanka and possibly into Antarctica. The available geochronological data including U-Pb zircon and EPMA monazite ages indicate that the rocks along the PCSZ underwent an episode of high-grade metamorphism at ca. 530 Ma that broadly coincides with the time of final assembly of the Gondwana supercontinent. Recent investigations on high-grade metamorphic rocks in this region have identified several new occurrences of garnet-clinopyroxene rocks and associated meta-gabbros from Perundurai, Paramati, Aniyapuram, Vadugappatti, and Mahadevi areas in Namakkal region within the central domain of the PCSZ. They occur as elongated boudins of 1 m to 1 km in length within hornblende-biotite orthogneiss. The garnet-clinopyroxene mafic granulites contain coarse-grained (up to several cm) garnet (Alm30-50 Pyr30-40 Grs10-20) and clinopyroxene (XMg = 0.70-0.85) with minor pargasite, plagioclase (An30-40), orthopyroxene (hypersthene), and rutile. Garnet and clinopyroxene are both subidioblastic and contain few inclusions of clinopyroxene (in garnet) and plagioclase. Orthopyroxene occur only as Opx + Pl symplectite between garnet and clinopyroxene in almost all the localities, suggesting the progress of decompressional reaction: Grt + Cpx + Qtz => Opx + Pl, which is a dominant texture in the PCSZ. The prograde mineral assemblage of the rocks is therefore inferred to be Grt + Cpx + Qtz, although quartz was probably totally consumed by the progress of the reaction. The metamorphic P-T calculations using Grt-Cpx-Pl-Qtz geothermobarometers yield T = 850-900°C and P >13 kbar, which is consistent with the occurrence of high-pressure Mg-rich staurolite in Mg-Al-rich rocks from this region. Fluid inclusion study of some garnet-clinopyroxene rock samples identified CO2-rich fluid inclusions trapped as primary phases within garnet, suggesting that prograde high-pressure metamorphism was dominated by CO2-rich fluids. The results therefore confirmed that the PCSZ underwent regional dry high-pressure metamorphism followed by the peak ultrahigh-temperature event probably associated with the continent-continent collisional and suturing history along the PCSZ.

[Results of flexor tendon sutures of the fingers with 2-strand (40 tendons) and 4-strand (64 tendons) core sutures].

PubMed

Winkel, R; Kalbhenn, O; Hoffmann, R

2012-06-01

This retrospective examination compares the results of finger flexor tendon sutures with 2 strands and 4 strands. It was checked, whether and how 2 more strands influenced the rupture rate, the movement of the finger and the contentment of the patients. From 1996 to 2000 for the core suture of the flexor tendon of fingers we used 2 strands. 35 patients with 40 tendon sutures of 73 patients were examined. From 2001 to 2005 we used for the core suture 2 loop threads. 53 patients with 64 tendon sutures from a total of 111 patients were examined. At least 12 months had passed between operation and the examination. The rupture rate and the range of movement of each finger joint and the total mobility of the affected fingers were evaluated. Each case was compared to the uninjured opposite hand. The functional result was judged according to the score of Buck-Gramcko. The patient's contentment was recorded by the DASH (disability of arm, shoulder and hand) score. Effects of gender, age, accompanying injuries, zone of the injury and their influence on the results were analysed. The Buck-Gramcko score showed in the 2-strand group a distribution from summarised 70% "excellent" and "good" and 30% "fair" and "poor". In the 4-strand-group the relation was 93.7% "excellent" and "good", 6.3% "fair", one "poor". In the 2-strand group 2/40 (5%) of the tendon sutures ruptured, in the 4-strand group 1/64 (1.6%) ruptured. The average DASH value in the 2-strands-group was 16.6/100, in the 4-strands-group 18.1/100 when 0 is the best possible result and 100 the worst. The patient judgement in the 2-strand group was summarised to 70% for "excellent" and "good" and 30% "fair" and "poor". In the 4-strand group the patient's judgment was summarised in 75% "excellent" and "good" and in 25% "fair". The results of flexor tendon sutures with 4-strand core sutures have been superior to the results with 2-strand core suture according to range of motion of the fingers (P <0.005). © Georg Thieme Verlag KG Stuttgart · New York.

The eastern Black Sea-Caucasus region during the Cretaceous: New evidence to constrain its tectonic evolution

NASA Astrophysics Data System (ADS)

Sosson, Marc; Stephenson, Randell; Sheremet, Yevgeniya; Rolland, Yann; Adamia, Shota; Melkonian, Rafael; Kangarli, Talat; Yegorova, Tamara; Avagyan, Ara; Galoyan, Ghazar; Danelian, Taniel; Hässig, Marc; Meijers, Maud; Müller, Carla; Sahakyan, Lilit; Sadradze, Nino; Alania, Victor; Enukidze, Onice; Mosar, Jon

2016-01-01

We report new observations in the eastern Black Sea-Caucasus region that allow reconstructing the evolution of the Neotethys in the Cretaceous. At that time, the Neotethys oceanic plate was subducting northward below the continental Eurasia plate. Based on the analysis of the obducted ophiolites that crop out throughout Lesser Caucasus and East Anatolides, we show that a spreading center (AESA basin) existed within the Neotethys, between Middle Jurassic and Early Cretaceous. Later, the spreading center was carried into the subduction with the Neotethys plate. We argue that the subduction of the spreading center opened a slab window that allowed asthenospheric material to move upward, in effect thermally and mechanically weakening the otherwise strong Eurasia upper plate. The local weakness zone favored the opening of the Black Sea back-arc basins. Later, in the Late Cretaceous, the AESA basin obducted onto the Taurides-Anatolides-South Armenia Microplate (TASAM), which then collided with Eurasia along a single suture zone (AESA suture).

First-order similarities and differences between Alps, Dinarides, Hellenides and Anatolides-Taurides

NASA Astrophysics Data System (ADS)

Schmid, Stefan M.; Bernoulli, Daniel; Fügenschuh, Bernhard; Matenco, Liviu; Schefer, Senecio; Oberhänsli, Roland; van Hinsbergen, Douwe; Ustaszewski, Kamil

2013-04-01

We correlated tectonic units across several circum-Mediterranean orogen strands between the Alps, Carpathians, the Balkan Peninsula, the Aegean and Western Turkey. Our compilation allows discussing fundamental along-strike similarities and differences. One first-order difference is that Dinarides-Hellenides, Anatolides and Taurides represent orogens of opposite subduction polarity and age with respect to the Alps and Carpathians. The internal Dinarides are linked to the Alps and Western Carpathians along the Mid-Hungarian fault zone, a suspected former trench-trench transform fault; its lithospheric root was obliterated during Neogene back-arc extension that formed the Pannonian Basin. Dinarides and Hellenides alike consist of far-travelled nappes detached from the Adriatic continental margin along décollement horizons in Paleozoic or younger stratigraphic levels during Cretaceous and Cenozoic orogeny. The more internal nappes (i.e. Jadar-Kopaonik, Drina-Ivanjica, East Bosnian-Durmitor and their Pelagonian and Almopias equivalents in the Hellenides) are composite nappes whereby the allochthonous Adriatic margin sequences passively carry ophiolites (Western Vardar Ophiolitic Unit) obducted during the latest Jurassic-earliest Cretaceous. These obducted ophiolitic units, as well as ophiolites obducted onto Europe-derived units presently found in the East Carpathians (Eastern Vardar Ophiolitic Unit obducted onto the Dacia continental block), root in one single Neotethys ocean that started closing with the initiation of obduction in the latest Jurassic; final suturing occurred during Cretaceous times, terminating with the formation of the Sava-Izmir-Ankara suture in the latest Cretaceous. Ophiolitic "massifs" found outside the Sava-Izmir-Ankara suture zone do not mark oceanic sutures, nor do the Drina-Ivanjica and Pelagonian "massifs" represent independent continental fragments (terranes). The same logic applies to Western Turkey with the difference that the ophiolites were obducted in Late Cretaceous rather than Late Jurassic times. Also, the Sakarya zone and Cretaceous ophiolites of Turkey cannot be traced far into the Aegean region. The widespread existence of obducted ophiolites in the East Carpathians, Dinarides-Hellenides and Western Turkey thus represents a first-order difference to the Alps and Western Carpathians, where oceanic units derived from the Alpine Tethys occur invariably within accretionary prisms. Important lateral changes are also observed when comparing the present-day lithospheric configuration of the Dinarides with that of the Hellenides. In the Dinarides the Adriatic lithospheric slab can only be traced down to a depth of c. 200 km. In the Hellenides an over 2100 km long slab is still preserved below the Aegean part of the Hellenides, indicating long-lasting subduction of a coherent lithospheric slab that initiated during the onset of closure of Neotethys in Late Jurassic times. Some 1500 km of this total slab length became subducted after the closure of Neotethys and formation of the Sava-Izmir-Ankara suture zone. Out of this total some 800 km result from plate convergence while some 700 km are a consequence of massive back-arc extension and rollback.

Morphological and molecular identification of cryptic species in the Sergentomyia bailyi (Sinton, 1931) complex in Sri Lanka.

PubMed

Tharmatha, T; Gajapathy, K; Ramasamy, R; Surendran, S N

2017-02-01

The correct identification of sand fly vectors of leishmaniasis is important for controlling the disease. Genetic, particularly DNA sequence data, has lately become an important adjunct to the use of morphological criteria for this purpose. A recent DNA sequencing study revealed the presence of two cryptic species in the Sergentomyia bailyi species complex in India. The present study was undertaken to ascertain the presence of cryptic species in the Se. bailyi complex in Sri Lanka using morphological characteristics and DNA sequences from cytochrome c oxidase subunits. Sand flies were collected from leishmaniasis endemic and non-endemic dry zone districts of Sri Lanka. A total of 175 Se. bailyi specimens were initially screened for morphological variations and the identified samples formed two groups, tentatively termed as Se. bailyi species A and B, based on the relative length of the sensilla chaeticum and antennal flagellomere. DNA sequences from the mitochondrial cytochrome c oxidase subunit I (COI) and subunit II (COII) genes of morphologically identified Se. bailyi species A and B were subsequently analyzed. The two species showed differences in the COI and COII gene sequences and were placed in two separate clades by phylogenetic analysis. An allele specific polymerase chain reaction assay based on sequence variation in the COI gene accurately differentiated species A and B. The study therefore describes the first morphological and genetic evidence for the presence of two cryptic species within the Se. bailyi complex in Sri Lanka and a DNA-based laboratory technique for differentiating them.

Basal crevasses and suture zones in the Larsen C Ice Shelf, Antarctica: Implications for ice shelf stability in a warming climate

NASA Astrophysics Data System (ADS)

McGrath, Daniel J.

Understanding ice shelf structure and processes is paramount to future predictions of sea level rise, as nearly 75% of the ice flux from the Antarctic Ice Sheet (AIS) passes through these gates. The breakup of an ice shelf removes the longitudinal back stress acting on the grounded inland ice and leads to flow acceleration, dynamic thinning and frontal retreat, processes that can be sustained for more than a decade. Increased ice discharge to the ocean contributes to global sea level rise. This dissertation investigates basal crevasses and suture zones, two key structural components of ice shelves, in order to understand how the structure of an ice shelf influences its stability in a warming climate. Ground penetrating radar, high-resolution satellite imagery and a variety of modeling approaches are utilized to assess these features on the Larsen C Ice Shelf but in a manner that considers their influence on ice shelf stability around the AIS. Basal crevasses are large-scale (~66% of ice thickness and ten's of kms in length) and abundant features that are significant structural weaknesses. The viscoplastic deformation of the ice shelf in response to the perturbed hydrostatic balance leads to the formation of both surface depressions and crevasses, hence weakening the ice shelf further. Basal crevasses increase the local ice-ocean interface by ~30%, thereby increasing basal roughness and altering ice-ocean interactions. Ice-shelf fractures frequently terminate where they encounter suture zones, regions of material heterogeneity that form at the lateral bounds of meteoric inflows to ice shelves. The termination of a 25 km-long rift in the Churchill Peninsula suture zone is investigated and found to contain ~60 m of accreted marine ice. Steady-state basal melting/freezing rates are determined for the ice shelf and applied to a flowline model to examine the along-flow evolution of ice shelf structure. The thickening surface wedge of locally accumulated meteoric ice, which likely has limited lateral variation in its mechanical properties, accounts for ~60% of the total ice thickness near the calving front. This suggests that the material heterogeneities present in the lower ~40% of the ice column are responsible for resisting fracture propagation and thereby delaying tabular calving events. This represents a highly sensitive aspect of ice-shelf stability, as changes in the oceanic forcing may lead to the loss of this heterogeneity.

Geothermal potential of Caledonian granites underlying Upper Palaeozoic sedimentary basins astride the Iapetus Suture Zone in Ireland

NASA Astrophysics Data System (ADS)

Fritschle, Tobias; Daly, J. Stephen; Whitehouse, Martin J.; McConnell, Brian; Buhre, Stephan

2014-05-01

Upper Palaeozoic sedimentary basins in Ireland overlie crystalline rocks within the Caledonian Iapetus Suture Zone. Beneath these basins, Lower Palaeozoic rocks, formed and deformed during the Caledonian orogenic cycle, were intruded by c. 420-390 Ma late-tectonic granites at various tectonic levels. These include the subsurface Kentstown and Glenamaddy granites discovered by mineral exploration drilling. While these granites comprise actual targets for Enhanced Geothermal System (EGS) exploration, several others likely exist based on geophysical considerations. In order to test the regional geothermal potential, the buried granites as well as analogue exposed rocks are being investigated geochemically. The geothermal potential of the intrusives depends on their heat production rate (HPR), which is calculated using rock density and concentrations of the heat producing elements (HPE) uranium, thorium and potassium. In spite of their close spacing and similar ages, the whole-rock geochemistry of the granites varies significantly, but with no obvious geographical control (Fritschle et al., 2013; 2014). The granite HPR values range from 1.4 μW/m3 for the Dhoon Granite (Isle of Man) to 4.9 μW/m3 for the Drogheda Granite (Ireland). This compares with the average HPR for a 'typical' granite of 2.7 μW/m3 (Goldstein et al., 2009). It is demonstrated that an elevated HPR of a granite can be related to enrichment in one of the HPE alone (e.g., uranium-enrichment in the Foxdale Granite (Isle of Man), or thorium-enrichment in the Drogheda Granite). Enrichment in HPE in a granite may occur due to different reasons including hydrothermal (re-) distribution of uranium, or the assimilation of thorium-rich wall-rocks. Hence, the distribution of the HPE in particular minerals, veins and source lithologies, along with the petrophysical characteristics of the sedimentary basins and the granites' petrogenesis, are currently being investigated as possible mechanisms controlling their heat production budget. Fritschle, T., Daly, J.S., Whitehouse, M.J., McConnell, B., Buhre, S., 2013. U-Pb Zircon Ages from Granites in the Iapetus Suture Zone in Ireland and the Isle of Man. Mineralogical Magazine, 77(5): 1115. Fritschle, T., Daly, J.S., Whitehouse, M.J., McConnell, B., Buhre, S., 2014. Zircon geochronology and Hf-O isotope geochemistry from granites in the Iapetus Suture Zone in Ireland and the Isle of Man. This issue. Goldstein, B.A., Hill, A.J., Long, A., Budd, A.R., Ayling, B., Malavazos, M., 2009. Hot rocks down under - evolution of a new energy industry. Geothermal Resources Council Transactions, 33: 185-198.

Seismotectonics of New Guinea: a Model for Arc Reversal Following Arc-Continent Collision

NASA Astrophysics Data System (ADS)

Cooper, Patricia; Taylor, Brian

1987-02-01

The structure and evolution of the northern New Guinea collision zone is deduced from International Seismological Center (ISC) seismicity (1964-1985), new and previously published focal mechanisms and a reexamination of pertinent geological data. A tectonic model for the New Guinea margin is derived which illustrates the sequential stages in the collision and suturing of the Bewani-Toricelli-Adelbert-Finisterre-Huon-New Britain arc to central New Guinea followed by subduction polarity reversal in the west. East of 149°E, the Solomon plate is being subducted both to the north and south; bringing the New Britain and Trobriand forearcs toward collision. West of 149°E the forearcs have collided, and together they override a fold in the doubly subducted Solomon plate lithosphere, which has an axis that is parallel to the strike of the Ramu-Markham suture and that plunges westward at an angle of 5° beneath the coast ranges of northern New Guinea. Active volcanism off the north coast of New Guinea is related to subduction of the Solomon plate beneath the Bismarck plate. Active volcanism of the Papuan peninsula and Quaternary volcanism of the New Guinea highlands are related to slow subduction of the Solomon plate beneath the Indo-Australian plate along the Trobriand Trough and the trough's former extension to the west, respectively. From 144°-148°E, seismicity and focal mechanisms reveal that convergence between the sutured Bismarck and Indo-Australian plates is accommodated by thrusting within the Finisterre and Adelbert ranges and compression of the New Guinea orogenic belt, together with basement-involved foreland folding and thrusting to the south. The Finisterre block overthrusts the New Guinea orogenic belt, whereas the Adelbert block is sutured to New Guinea and overthrusts the oceanic lithosphere of the Bismarck Sea. Along the New Guinea Trench, west of 144°E, seismicity defines a southward dipping Wadati-Benioif zone, and focal mechanisms indicate oblique subduction. Only this oldest, westernmost portion of the collision has progressed past suturing to a full reversal in subduction polarity.

Placing an upper limit on cryptic marine sulphur cycling.

PubMed

Johnston, D T; Gill, B C; Masterson, A; Beirne, E; Casciotti, K L; Knapp, A N; Berelson, W

2014-09-25

A quantitative understanding of sources and sinks of fixed nitrogen in low-oxygen waters is required to explain the role of oxygen-minimum zones (OMZs) in controlling the fixed nitrogen inventory of the global ocean. Apparent imbalances in geochemical nitrogen budgets have spurred numerous studies to measure the contributions of heterotrophic and autotrophic N2-producing metabolisms (denitrification and anaerobic ammonia oxidation, respectively). Recently, 'cryptic' sulphur cycling was proposed as a partial solution to the fundamental biogeochemical problem of closing marine fixed-nitrogen budgets in intensely oxygen-deficient regions. The degree to which the cryptic sulphur cycle can fuel a loss of fixed nitrogen in the modern ocean requires the quantification of sulphur recycling in OMZ settings. Here we provide a new constraint for OMZ sulphate reduction based on isotopic profiles of oxygen ((18)O/(16)O) and sulphur ((33)S/(32)S, (34)S/(32)S) in seawater sulphate through oxygenated open-ocean and OMZ-bearing water columns. When coupled with observations and models of sulphate isotope dynamics and data-constrained model estimates of OMZ water-mass residence time, we find that previous estimates for sulphur-driven remineralization and loss of fixed nitrogen from the oceans are near the upper limit for what is possible given in situ sulphate isotope data.

Necessary Conditions for Intraplate Seismic Zones in North America

NASA Astrophysics Data System (ADS)

Thomas, William A.; Powell, Christine A.

2017-12-01

The cause of intraplate seismic zones persists as an important scientific and societal question. Most intraplate earthquakes are concentrated in specific seismic zones along or adjacent to large-scale basement structures (e.g., rifts or sutures at ancient plate boundaries) within continental crust. The major intraplate seismic zones are limited to specific segments and are not distributed along the lengths of the ancient structures. We present a new hypothesis that major intraplate seismic zones are restricted to places where concentrated crustal deformation (CCD) is overprinted on large-scale basement structures. Examples where CCD affects the stability of specific parts of large-scale structures in response to present-day stress conditions include the most active seismic zones in central and eastern North America: Charlevoix, Eastern Tennessee, and New Madrid. Our hypothesis has important implications for the assessment of seismic hazards.

Collisional emplacement history of the Naga-Andaman ophiolites and the position of the eastern Indian suture

NASA Astrophysics Data System (ADS)

Acharyya, S. K.

2007-02-01

Dismembered late Mesozoic ophiolites occur in two parallel belts along the eastern margin of the Indian Plate. The Eastern Belt, closely following the magmatic arc of the Central Burma Basin, coincides with a zone of high gravity. It is considered to mark a zone of steeply dipping mafic-ultramafic rocks and continental metamorphic rocks, which are the locus of two closely juxtaposed sutures. In contrast, the Western Belt, which follows the eastern margin of the Indo-Burma Range and the Andaman outer-island-arc, broadly follows a zone of negative gravity anomalies. Here the ophiolites occur mainly as rootless subhorizontal bodies overlying Eocene-Oligocene flyschoid sediments. Two sets of ophiolites that were accreted during the Early Cretaceous and mid-Eocene are juxtaposed in this belt. These are inferred to be westward propagated nappes from the Eastern Belt, emplaced during the late Oligocene collision between the Burmese and Indo-Burma-Andaman microcontinents. Ophiolite occurrences in the Andaman Islands belong to the Western Belt and are generally interpreted as upthrust oceanic crust, accreted due to prolonged subduction activity to the west of the island arc. This phase of subduction began only in the late Miocene and thus could not have produced the ophiolitic rocks, which were accreted in the late Early Eocene.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chan, Gabriel, E-mail: dr.changabriel@gmail.com; Quek, Lawrence Hwee Han, E-mail: lawrence-quek@ttsh.com.sg; Tan, Glenn Leong Wei, E-mail: glenn-tan@ttsh.com.sg

BackgroundInsertion of a carotid chimney graft during thoracic endovascular aortic repair (Ch-TEVAR) is a recognized technique to extend the proximal landing zone into the aortic arch in the treatment of thoracic aortic disease. Conventional technique requires surgical exposure of the carotid artery for insertion of the carotid chimney graft.MethodologyWe describe our experience in the use of a suture-mediated closure device in percutaneous Ch-TEVAR in four patients.ResultsSuccessful hemostasis was achieved in all four patients. No complications related to the carotid puncture were recorded.ConclusionWe conclude that using suture-mediated closure device for carotid closure appears feasible and deserves further studies as a potentialmore » alternative to conventional surgical approach.« less

Coolwater culmination: Sensitive high-resolution ion microprobe (SHRIMP) U-Pb and isotopic evidence for continental delamination in the Syringa Embayment, Salmon River suture, Idaho

USGS Publications Warehouse

Lund, K.; Aleinikoff, J.N.; Yacob, E.Y.; Unruh, D.M.; Fanning, C.M.

2008-01-01

During dextral oblique translation along Laurentia in western Idaho, the Blue Mountains superterrane underwent clockwise rotation and impinged into the Syringa embayment at the northern end of the Salmon River suture. Along the suture, the superterrane is juxtaposed directly against western Laurentia, making this central Cordilleran accretionary-margin segment unusually attenuated. In the embayment, limited orthogonal contraction produced a crustal wedge of oceanic rocks that delaminated Laurentian crust. The wedge is exposed through Laurentian crust in the Coolwater culmination as documented by mapping and by sensitive high-resolution ion microprobe U-Pb, Sri, and ??Nd data for gneisses that lie inboard of the suture. The predominant country rock is Mesoproterozoic paragneiss overlying Laurentian basement. An overlying Neoproterozoic (or younger) paragneiss belt in the Syringa embayment establishes the form of the Cordilleran miogeocline and that the embayment is a relict of Rodinia rifting. An underlying Cretaceous paragneiss was derived from arc terranes and suture-zone orogenic welt but also from Laurentia. The Cretaceous paragneiss and an 86-Ma orthogneiss that intruded it formed the wedge of oceanic rocks that were inserted into the Laurentian margin between 98 and 73 Ma, splitting supracrustal Laurentian rocks from their basement. Crustal thickening, melting and intrusion within the wedge, and folding to form the Coolwater culmination continued until 61 Ma. The embayment formed a restraining bend at the end of the dextral transpressional suture. Clockwise rotation of the impinging superterrane and overthrusting of Laurentia that produced the crustal wedge in the Coolwater culmination are predicted by oblique collision into the Syringa embayment. Copyright 2008 by the American Geophysical Union.

From Compression to Extension: Cretaceous A-type Granite as Indicator of Geodynamic Changes in the Adria Part of the European Neotethys Suture Zone

NASA Astrophysics Data System (ADS)

Balen, D.; Schneider, P.; Massonne, H. J.; Opitz, J.; Petrinec, Z.

2017-12-01

The Cretaceous suture zone between the colliding plates of European and Adria (Gondwana) marks the closure of the W Neotethys branch. This zone, partly located in the northern Croatia, comprises reddish alkali granite which is mainly composed of alkali feldspar and quartz, with small amounts of albite, white mica and hematite with ilmenite exsolutions. Accessory minerals include zircon, apatite and Fe-(Ti)-oxides. This granite shows a geochemical signature typical for A2-type granite characterized by a highly siliceous composition and an enrichment in alkalies (high-K calc-alkaline series) and Al (strongly peraluminous, ASI>1.1). The rock belongs to the group of oxidized and ferroan granites with low CaO, MgO, MnO and FeO* contents. Characteristic trace element ratios, primitive mantle and OIB normalized spider-diagrams show significant positive anomalies of Rb, Th, U, K, Zr and Pb accompanied with clear negative anomalies of Ba, Nb, Sr, P, Eu and Ti. The negative anomalies suggest fractionation of plagioclase, apatite and Fe-Ti oxide. Based on the geochemical characteristics the magma originated mainly from melting of lower continental crust (granulite facies metasediments) although a mantle contribution cannot be excluded. The melting process could have been triggered by a heat from the upwelling upper mantle as inferred from zircon typology (D and J5 types prevail), as well from the zircon and whole-rock chemistry accompanied with high zircon saturation temperatures (T=860-950°C). Subsequent ascent of granitic magma was localized along the Europe-Adria suture i.e. the Sava Zone segment of the Late Cretaceous collisional zone where granite was emplaced at ca. 20 km depth. The emplacement followed a long period of Mesozoic orogenic compressional activity. Typical for A-type granites, although in our case related to the subduction of the Adria plate underneath the European plate, is their formation in an extensional tectonic regime. Thus, the studied A-type granite indicates the onset of transition from compression to extension at the European margin. This event occurred in the interval between 87.7-85.8 Ma as shown by 207Pb/235U, 206Pb/238U and 208Pb/232Th ratios measured with LA-ICP-MS on zircon. Support by the Croatian Science Foundation (IP-2014-09-9541) is acknowledged.

The Strength of Transosseous Medial Meniscal Root Repair Using a Simple Suture Technique Is Dependent on Suture Material and Position.

PubMed

Robinson, James R; Frank, Evelyn G; Hunter, Alan J; Jermin, Paul J; Gill, Harinderjit S

2018-03-01

A simple suture technique in transosseous meniscal root repair can provide equivalent resistance to cyclic load and is less technically demanding to perform compared with more complex suture configurations, yet maximum yield loads are lower. Various suture materials have been investigated for repair, but it is currently not clear which material is optimal in terms of repair strength. Meniscal root anatomy is also complex; consisting of the ligamentous mid-substance (root ligament), the transition zone between the meniscal body and root ligament; the relationship between suture location and maximum failure load has not been investigated in a simulated surgical repair. (A) Using a knottable, 2-mm-wide, ultra-high-molecular-weight polyethylene (UHMWPE) braided tape for transosseous meniscal root repair with a simple suture technique will give rise to a higher maximum failure load than a repair made using No. 2 UHMWPE standard suture material for simple suture repair. (B) Suture position is an important factor in determining the maximum failure load. Controlled laboratory study. In part A, the posterior root attachment of the medial meniscus was divided in 19 porcine knees. The tibias were potted, and repair of the medial meniscus posterior root was performed. A suture-passing device was used to place 2 simple sutures into the posterior root of the medial meniscus during a repair procedure that closely replicated single-tunnel, transosseous surgical repair commonly used in clinical practice. Ten tibias were randomized to repair with No. 2 suture (Suture group) and 9 tibias to repair with 2-mm-wide knottable braided tape (Tape group). The repair strength was assessed by maximum failure load measured by use of a materials testing machine. Micro-computed tomography (CT) scans were obtained to assess suture positions within the meniscus. The wide range of maximum failure load appeared related to suture position. In part B, 10 additional porcine knees were prepared. Five knees were randomized to the Suture group and 5 to the Tape group. All repairs were standardized for location, and the repair was placed in the body of the meniscus. A custom image registration routine was created to coregister all 29 menisci, which allowed the distribution of maximum failure load versus repair location to be visualized with a heat map. In part A, higher maximum failure load was found for the Tape group (mean, 86.7 N; 95% CI, 63.9-109.6 N) compared with the Suture group (mean, 57.2 N; 95% CI, 30.5-83.9 N). The 3D micro-CT analysis of suture position showed that the mean maximum failure load for repairs placed in the meniscus body (mean, 104 N; 95% CI, 81.2-128.0 N) was higher than for those placed in the root ligament (mean, 35.1 N; 95% CI, 15.7-54.5 N). In part B, the mean maximum failure load was significantly greater for the Tape group, 298.5 N ( P = .016, Mann-Whitney U; 95% CI, 183.9-413.1 N), compared with that for the Suture group, 146.8 N (95% CI, 82.4-211.6 N). Visualization with the heat map revealed that small variations in repair location on the meniscus were associated with large differences in maximum failure load; moving the repair entry point by 3 mm could reduce the failure load by 50%. The use of 2-mm braided tape provided higher maximum failure load than the use of a No. 2 suture. The position of the repair in the meniscus was also a highly significant factor in the properties of the constructs. The results provide insight into material and location for optimal repair strength.

Comparison of arthroscopic medial meniscal suture repair techniques: inside-out versus all-inside repair.

PubMed

Choi, Nam-Hong; Kim, Tae-Hyung; Victoroff, Brian N

2009-11-01

There are no reports comparing meniscal healing between inside-out and all-inside repairs using sutures. No difference in healing rate exists between meniscal repairs with inside-out and all-inside suture repair in conjunction with anterior cruciate ligament reconstruction with hamstring tendon. Cohort study; Level of evidence, 2. Forty-eight consecutive patients underwent meniscal repairs of longitudinal tears of the posterior horn of the medial meniscus combined with anterior cruciate ligament reconstructions. All-inside repair was attempted when the tears were located in the red-red zone or the ramp area of the meniscus. If a tear that was in the ramp area or red-red zone extended to the midbody of the meniscus, or if there was a tear in red-white zone, the inside-out repair technique was used. Fourteen patients had all-inside meniscal repairs, and 34 patients had inside-out meniscal repairs with absorbable sutures. Identical postoperative rehabilitation protocols were used. Postoperative evaluations included Lysholm knee scoring scale, Tegner activity levels, Lachman and pivot-shift tests, and KT-1000 arthrometer. Assessment of meniscal status was performed using joint line tenderness, McMurray test, and range of motion. Follow-up magnetic resonance imaging scans were obtained on all patients. Mean follow-up was 35.7 months. No patient had joint line tenderness or reported pain or clicking on McMurray test. There was no significant difference in range of motion between groups. Follow-up magnetic resonance imaging scans demonstrated that 10 (71.4%) menisci were healed and 4 (28.6%) partially healed in the all-inside group; 24 (70.6%) menisci were healed and 10 (29.4%) partially healed in the inside-out group. There was no significant difference in meniscal healing between groups. There were no differences in Lachman test, KT-1000 arthrometer side-to-side differences measurements, Lysholm scores, and Tegner activity scales. There was a significant difference in pivot-shift test between groups (P = .023). There were 2 complications associated with surgery. In the inside-out group, 1 patient required manipulation, and 2 patients had limited motion at final follow-up. Two patients in the inside-out group experienced transient saphenous nerve injury. There was no significant difference in meniscal healing between inside-out and all-inside repair techniques in combination with anterior cruciate ligament reconstructions.

Metamorphic belts of Anatolia

NASA Astrophysics Data System (ADS)

Oberhänsli, Roland; Prouteau, Amaury; Candan, Osman; Bousquet, Romain

2015-04-01

Investigating metamorphic rocks from high-pressure/low-temperature (HP/LT) belts that formed during the closure of several oceanic branches, building up the present Anatolia continental micro-plate gives insight to the palaeogeography of the Neotethys Ocean in Anatolia. Two coherent HP/LT metamorphic belts, the Tavşanlı Zone (distal Gondwana margin) and the Ören-Afyon-Bolkardağ Zone (proximal Gondwana margin), parallel their non-metamorphosed equivalent (the Tauride Carbonate Platform) from the Aegean coast in NW Anatolia to southern Central Anatolia. P-T conditions and timing of metamorphism in the Ören-Afyon-Bolkardağ Zone (>70?-65 Ma; 0.8-1.2 GPa/330-420°C) contrast those published for the overlying Tavşanlı Zone (88-78 Ma; 2.4 GPa/500 °C). These belts trace the southern Neotethys suture connecting the Vardar suture in the Hellenides to the Inner Tauride suture along the southern border of the Kirşehir Complex in Central Anatolia. Eastwards, these belts are capped by the Oligo-Miocene Sivas Basin. Another HP/LT metamorphic belt, in the Alanya and Bitlis regions, outlines the southern flank of the Tauride Carbonate Platform. In the Alanya Nappes, south of the Taurides, eclogites and blueschists yielded metamorphic ages around 82-80 Ma (zircon U-Pb and phengite Ar-Ar data). The Alanya-Bitlis HP belt testifies an additional suture not comparable to the northerly Tavşanlı and Ören-Afyon belts, thus implying an additional oceanic branch of the Neotethys. The most likely eastern lateral continuation of this HP belt is the Bitlis Massif, in SE Turkey. There, eclogites (1.9-2.4 GPa/480-540°C) occur within calc-arenitic meta-sediments and in gneisses of the metamorphic (Barrovian-type) basement. Zircon U-Pb ages revealed 84.4-82.4 Ma for peak metamorphism. Carpholite-bearing HP/LT metasediments representing the stratigraphic cover of the Bitlis Massif underwent 0.8-1.2 GPa/340-400°C at 79-74 Ma (Ar-Ar on white mica). These conditions compares to the Tavşanlı-Afyon realm. However the differences in time and P-T conditions (eclogite- vs. blueschist-facies units) in the Bitlis Massif indicate that the different metamorphic peak conditions were reached at different times in a single subduction zone. Exhumation from approx. 65 to 35 km depth occurred within <10 myr. The special relations between eclogite-blueschist are due to the fact that collision with the Arabian plate was and still is on going in the Bitlis area. The Bitlis HP rocks represent a subduction realm that separated the Bitlis-Pütürge(-Bistun?) continental block from the South-Armenian (Tauride?) block, further north. Post-Eocene blueschists south of the Bitlis Massif witness the separation of the Bitlis-Pütüre block from the Arabian plate, and the southward migration of the subduction zone from the Late Cretaceous to the Oligocene. Continuous convergence of Africa and Eurasia engendered the simultaneous consumption of several, separated branches of the Neotethys Ocean and amalgamation of different terranes. The rise of the Eastern Anatolia Plateau is related to this complex geodynamic setting. Reduced seismic velocities inferred from geophysical observations, which are interpreted as complete replacement of lithospheric- by asthenospheric mantle, can be explained by thermodynamic modelling as partial hydration of the lithospheric mantle wedge during protracted subduction. Hydrated lithospheric mantle is interpreted as result of the complex geodynamic setting in Anatolia with multiple simultaneous subduction zones.

Relationships between subduction and extension in the Aegean region: evidence from granite plutons of the Biga Peninsula, NW Turkey

NASA Astrophysics Data System (ADS)

Black, K. N.; Catlos, E. J.; Oyman, T.; Demirbilek, M.

2012-04-01

The Biga Peninsula is a tectonically complex region in western Turkey characterized by Tethyan sutures overprinted by extensional grabens, active fault strands of the North Anatolian Shear Zone, and numerous granitoid plutons. Two end-member models for the initiation of extension in the Biga region have been proposed, both of which focus on the role of igneous assemblages. The first model involves the emplacement of a hot mantle plume that thins and weakens crust and isostatic doming drives extension. The second has regional tensional stresses as the driving force, and magmatism is a consequence of decompression. Here we focus on understanding the timing and geochemical evolution of three granitoid plutons located in and just south of the Biga Peninsula to understand which end-member model could be applicable to the Aegean region. The Kestanbolu pluton is located north of the proposed Vardar Suture Zone, whereas the Eybek and Kozak plutons are north of the Izmir-Ankara Suture Zone. These sutures may mark regions of the closure of branches of the NeoTethyan Ocean. To better understand their sources and tectonic evolution, we acquired geochemical and geochronological data, and cathodoluminescence (CL) images of the rocks. Previously reported ages of the plutons range from Late Eocene to Middle Miocene. Here we acquired in situ (in thin section) ion microprobe U-Pb ages of zircon grains found in a range of textural relationships. Ages from the Kozak pluton range from 37.8±5.4 Ma to 10.3±2.4 Ma (238U/206Pb, ±1σ) with two ages from a single grain of 287±26 Ma and 257±18 Ma. We also found Oligocene to Late Miocene zircon grains in the Kestanbolu pluton, whereas zircons from the Eybek pluton range from 34.3±4.8 Ma to 21.2±1.7 Ma. Samples collected from the Kozak and Eybek plutons are magnesian, calc-alkalic, and metaluminous, whereas the Kestanbolu rocks are magnesian, alkali-calcic, and metaluminous with one ferroan sample and one peraluminous sample. Trace element data suggest the Kozak and Kestanbolu plutons have a volcanic arc source, whereas the Eybek pluton is syn-collisional. CL imagery documents a complex history of these granites including magma mixing, multiple episodes of brittle deformation, and fluid alteration. Microveins, microcracks, and myrmekite textures are present, indicating brittle deformation and fluid alteration. Plagioclase grains display a range of compositional zoning and some show distinctly cracked cores that are evidence of magma mixing. The Kozak, Eybek and Kestanbolu plutons may be sourced from the melting of the subducting Mediterranean oceanic crust with a contribution from the overlying Eurasian continental crust. These granites intruded into the Vardar and/or Izmir-Ankara Sutures, entraining the Permian zircon grain. The Oligocene zircon ages are consistent with magmatism propagating from north to south in the Aegean region, whereas the Late Miocene results are consistent with ongoing extension throughout the region at this time. In this scenario, slowing subduction along the Hellenic arc led to the formation of extensional structures that provided space for the accommodation of these magma bodies.

Magnetotelluric survey to locate the Archean-Proterozoic suture zone in the northeastern Great Basin, Nevada, Utah, and Idaho

USGS Publications Warehouse

Sampson, Jay A.; Rodriguez, Brian D.

2013-01-01

North-central Nevada contains a large amount of gold in linear belts, the origin of which is not fully understood. During July 2008, September 2009, and August 2010, the U.S. Geological Survey, as part of the Assessment Techniques for Concealed Mineral Resources project, collected twenty-three magnetotelluric soundings along two profiles in Box Elder County, Utah; Elko County, Nevada; and Cassia, Minidoka, and Blaine Counties, Idaho. The main twenty-sounding north-south magnetotelluric profile begins south of Wendover, Nev., but north of the Deep Creek Range. It continues north of Wendover and crosses into Utah, with the north profile terminus in the Snake River Plain, Idaho. A short, three-sounding east-west segment crosses the main north-south profile near the northern terminus of the profile. The magnetotelluric data collected in this study will be used to better constrain the location and strike of the concealed suture zone between the Archean crust and the Paleoproterozoic Mojave province. This report releases the magnetotelluric sounding data that was collected. No interpretation of the data is included.

The Togo-Benin-Nigeria Shield: evidence of crustal aggregation in the Pan-African belt

NASA Astrophysics Data System (ADS)

Ajibade, A. C.; Wright, J. B.

1989-08-01

The importance of "suspect" or "exotic" (i.e. allochthonous) terranes as a major element in collisional orogenic belts is becoming well established. We propose that the southern Pan-African domain in West Africa is an aggregation or " mosaic" of island arcs, interarc (ensimatic) basins and continental fragments. A fracture zone in northwestern Nigeria, already identified as a possible crustal suture, is shown to separate two contrasted basement terranes. Elsewhere in the shield are flat-lying structures characteristic of those associated with crustal convergence, lying within or near to major fractures. Many small ultramafic/mafic bodies occur in the shield and some of them may be remnants of ophiolites caught up in suture zones. An aggregation of allochthonous terranes (island arcs, sedimentary basins and continental blocks) would help to explain: (a) the great width of the Pan-African belt; (b) the spread of ages within the "Pan-African" range (c. 750-450 Ma), also the relict Liberian and Eburnian ages (c. 2700 and 2000 Ma respectively); and the enigmatic Kibaran "event" (c. 1100 Ma); (c) the contrasted volcano-sedimentary characteristics of the different supracrustal belts.

Crustal structure of the northern Menderes Massif, western Turkey, imaged by joint gravity and magnetic inversion

NASA Astrophysics Data System (ADS)

Gessner, Klaus; Gallardo, Luis A.; Wedin, Francis; Sener, Kerim

2016-10-01

In western Anatolia, the Anatolide domain of the Tethyan orogen is exposed in one of the Earth's largest metamorphic core complexes, the Menderes Massif. The Menderes Massif experienced a two-stage exhumation: tectonic denudation in the footwall of a north-directed Miocene extensional detachment, followed by fragmentation by E-W and NW-SE-trending graben systems. Along the northern boundary of the core complex, the tectonic units of the Vardar-Izmir-Ankara suture zone overly the stage one footwall of the core complex, the northern Menderes Massif. In this study, we explore the structure of the upper crust in the northern Menderes Massif with cross-gradient joint inversion of gravity and aeromagnetic data along a series of 10-km-deep profiles. Our inversions, which are based on gravity and aeromagnetic measurements and require no geological and petrophysical constraints, reveal the salient features of the Earth's upper crust. We image the northern Menderes Massif as a relatively homogenous domain of low magnetization and medium to high density, with local anomalies related to the effect of interspersed igneous bodies and shallow basins. In contrast, both the northern and western boundaries of the northern Menderes Massif stand out as domains where dense mafic, metasedimentary and ultramafic domains with a weak magnetic signature alternate with low-density igneous complexes with high magnetization. With our technique, we are able to delineate Miocene basins and igneous complexes, and map the boundary between intermediate to mafic-dominated subduction-accretion units of the suture zone and the underlying felsic crust of the Menderes Massif. We demonstrate that joint gravity and magnetic inversion are not only capable of imaging local and regional changes in crustal composition, but can also be used to map discontinuities of geodynamic significance such as the Vardar-Izmir-Ankara suture and the West Anatolia Transfer Zone.

Invasion of the lyme disease vector Ixodes scapularis: implications for Borrelia burgdorferi endemicity.

PubMed

Hamer, Sarah A; Tsao, Jean I; Walker, Edward D; Hickling, Graham J

2010-08-01

Lyme disease risk is increasing in the United States due in part to the spread of blacklegged ticks Ixodes scapularis, the principal vector of the spirochetal pathogen Borrelia burgdorferi. A 5-year study was undertaken to investigate hypothesized coinvasion of I. scapularis and B. burgdorferi in Lower Michigan. We tracked the spatial and temporal dynamics of the tick and spirochete using mammal, bird, and vegetation drag sampling at eight field sites along coastal and inland transects originating in a zone of recent I. scapularis establishment. We document northward invasion of these ticks along Michigan's west coast during the study period; this pattern was most evident in ticks removed from rodents. B. burgdorferi infection prevalences in I. scapularis sampled from vegetation in the invasion zone were 9.3% and 36.6% in nymphs and adults, respectively, with the majority of infection (95.1%) found at the most endemic site. There was no evidence of I. scapularis invasion along the inland transect; however, low-prevalence B. burgdorferi infection was detected in other tick species and in wildlife at inland sites, and at northern coastal sites in years before the arrival of I. scapularis. These infections suggest that cryptic B. burgdorferi transmission by other vector-competent tick species is occurring in the absence of I. scapularis. Other Borrelia spirochetes, including those that group with B. miyamotoi and B. andersonii, were present at a low prevalence within invading ticks and local wildlife. Reports of Lyme disease have increased significantly in the invasion zone in recent years. This rapid blacklegged tick invasion--measurable within 5 years--in combination with cryptic pathogen maintenance suggests a complex ecology of Lyme disease emergence in which wildlife sentinels can provide an early warning of disease emergence.

Strain Variation in Accretionary Prisms Across Space and Time: Insights from the Makran Subduction Zone

NASA Astrophysics Data System (ADS)

Penney, C.; Tavakoli, F.; Saadat, A.; Nankali, H. R.; Sedighi, M.; Khorrami, F.; Sobouti, F.; Rafi, Z.; Copley, A.; Jackson, J. A.; Priestley, K. F.

2017-12-01

The Makran is one of the world's least-studied subduction zones. In particular, little is known about the accumulation and accommodation of strain in the onshore part of the subduction zone, which parallels the coasts of southern Iran and Pakistan. The deformation of the Makran accretionary prism results from both its subduction zone setting and N-S right-lateral shear between central Iran and Afghanistan. North of the Makran, this shear is accommodated by a series of right-lateral faults which offset the rocks of the Sistan Suture Zone, an abandoned accretionary prism. However, these right-lateral faults are not observed south of 27°N, and no major N-S faults cut the E-W trending structures of the Makran. How this right-lateral motion is accommodated at the southern end of the Sistan Suture Zone is a long-standing tectonic question. By combining results from geomorphology, GPS, seismology and modelling we conclude that right-lateral motion is transferred across the depression north of the accretionary prism to the region of right-lateral shear at the western end of the accretionary prism. This requires the Jaz Murian depression to be bounded by normal faults, consistent with the basin geomorphology. However, GPS data show compression across the margins of the basin, and no shallow normal-faulting earthquakes have been observed in the region. We therefore suggest that the behaviour of these faults may be time-dependent and controlled by the megathrust seismic cycle, as has been suggested elsewhere (e.g. Chile). Recent strike-slip earthquakes, including the 2013 Balochistan earthquake, have clustered at the prism's lateral edges, showing the importance of spatial, as well as temporal, variations in strain. These earthquakes have reactivated thrust faults in the Makran accretionary prism, showing that the style of strain within accretionary prisms can vary on multiple timescales and allowing us to calculate the coefficient of friction on the underlying megathrust.

Suture versus FasT-Fix all-inside meniscus repair at time of anterior cruciate ligament reconstruction.

PubMed

Choi, Nam-Hong; Kim, Byeong-Yeon; Hwang Bo, Byung-Hun; Victoroff, Brian N

2014-10-01

To compare meniscal healing and functional outcomes after all-inside meniscal repair between sutures and meniscal fixation devices. Sixty patients with a tear within the red-red or red-white zones of the posterior horn of the medial or lateral meniscus in conjunction with an anterior cruciate ligament (ACL) tear were included in this study. Meniscal repairs were performed with sutures in 35 patients and the FasT-Fix device (Smith & Nephew Endoscopy, Andover, MA) in 25 patients concomitantly with hamstring ACL reconstruction. Postoperative evaluations included Lysholm knee score, Tegner activity scale, Lachman and pivot-shift tests, and KT-1000 arthrometer (MEDmetric, San Diego, CA) testing. Follow-up magnetic resonance imaging (MRI) scans were obtained postoperatively for all patients to evaluate meniscal healing. The mean follow-up period was 47.2 months. In the suture group, 31 patients (86.1%) were asymptomatic and 4 (13.9%) were symptomatic. In the FasT-Fix group, 20 patients (80%) were asymptomatic and 5 (20%) were symptomatic. Postoperative functional evaluation and knee stability showed no statistically significant difference between the 2 groups. Follow-up MRI showed that 26 menisci (74.3%) were healed, 3 menisci (8.6%) were partially healed, and 6 menisci (17.1%) were not healed in the suture group. In the FasT-Fix group, 15 menisci (64%) were healed, 7 menisci (24%) were partially healed, and 3 menisci (12%) were not healed. Follow-up MRI showed no statistically significant difference between the 2 groups. In the FasT-Fix group, follow-up MRI showed a newly developed cyst posterior to the medial meniscus in 2 patients. A new tear anterior to the previous tear was found in 1 patient. In the suture group, follow-up MRI showed no cysts or new tears. All-inside meniscal repairs using either sutures or the FasT-Fix device showed satisfactory results in patients with concomitant hamstring ACL reconstruction. There was no statistically significant difference in meniscal healing evaluated by MRI and functional outcomes between the 2 techniques. Level III, retrospective comparative study. Copyright © 2014 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.

Boron Isotopes as Tracers of the Tectonic Origin and Geological History of Serpentinites in Subduction and Suture Zones.

NASA Astrophysics Data System (ADS)

Martin, C.; Harlow, G. E.; Flores, K. E.; Angiboust, S.

2017-12-01

Serpentinites are known to play a key role in subduction, because they contain significant water content and can be enriched in elements such as As, B, Li, Sb, and U. They originate by hydration of peridotite by two different processes: (i) by a seawater source reacting with peridotite beneath the ocean crust and (ii) by reaction of peridotite at the base of the mantle-wedge with fluids released from the slab during subduction. In suture zones, it is relatively common to find serpentinite from both exhumed subduction channel mélange (from the mantle wedge) and ophiolite (from the oceanic crust), but recognizing them and their tectonic origin can be difficult. A recent study based on samples from the Guatemala Suture Zone demonstrated that boron (B) isotopes can be used as a probe of the fluid from which serpentinites form. Serpentinites from an ophiolite complex have positive δ11B, as expected for peridotites hydrated by seawater-derived fluid, whereas serpentinite samples from the matrix of the mélange (coming from the roof of the subducting channel) have negative δ11B, in agreement with hydration of mantellic peridotites by fluids released at 30-70 km depth from metamorphic rocks. Serpentinites from tectonically well-constrained locations were selected to extend our knowledge of metasomatism in subduction-related areas. The trace-element contents and B isotopes were measured in situ, respectively by LA-ICP-MS and LA-MC-ICP-MS on samples from the oceanic crust (ophiolite = Guatemala, Iran, Cuba), the subduction forearc (Nicaragua), and the mantle wedge (Guatemala, Iran, Japan, Myanmar). The spider diagrams and REE patterns, as well as a B/La vs. As/La diagram do not show any reliable difference to distinguish the tectonic origin of the serpentinite. However, in a δ11B vs. B content diagram, the serpentinites seem to plot in a triangle with fluid endmembers representing (i) seawater (δ11B = 40‰, [B] = 5ppm), (ii) metabasite-issued metamorphic fluids, and (iii) metasediments-issued metamorphic fluids (δ11B varies with temperature from +19 to - 15‰, [B] badly constrained but likely varies with depth (i.e., T) from hundreds (in metasediments) to few (in metabasites) ppm). Thus, the tectonic origin of serpentinites encountered in suture areas as well as the fluid(s) responsible of it might be defined in a δ11B vs. B diagram.

Three-Dimensional Seismic Imaging of Eastern Russia

DTIC Science & Technology

2008-09-01

small blocks or microplates within the ancient suture and present-day plate boundary zones. We assembled catalog picks from ~13,000 events and ~100... oceanic fragments that have been disrupted, deformed, and juxtaposed. The Kolyma-Omolon superterrane consists of a number of cratonal (Omolon...Prikolyma), continental margin (Omulevka), island arc (Alazeya, Khetachan), and oceanic terranes of diverse ages that amalgamated in the Early Mesozoic

Geographical assemblages of European raptors and owls

NASA Astrophysics Data System (ADS)

López-López, Pascual; Benavent-Corai, José; García-Ripollés, Clara

2008-09-01

In this work we look for geographical structure patterns in European raptors (Order: Falconiformes) and owls (Order: Strigiformes). For this purpose we have conducted our research using freely available tools such as statistical software and databases. To perform the study, presence-absence data for the European raptors and owl species (Class Aves) were downloaded from the BirdLife International website. Using the freely available "pvclust" R-package, we applied similarity Jaccard index and cluster analysis in order to delineate biogeographical relationships for European countries. According to the cluster of similarity, we found that Europe is structured into two main geographical assemblages. The larger length branch separated two main groups: one containing Iceland, Greenland and the countries of central, northern and northwestern Europe, and the other group including the countries of eastern, southern and southwestern Europe. Both groups are divided into two main subgroups. According to our results, the European raptors and owls could be considered structured into four meta-communities well delimited by suture zones defined by Remington (1968) [Remington, C.L., 1968. Suture-zones of hybrid interaction between recently joined biotas. Evol. Biol. 2, 321-428]. Climatic oscillations during the Quaternary Ice Ages could explain at least in part the modern geographical distribution of the group.

Mesozoic Deformation and Its Geological Significance in the Southern Margin of the South China Sea

NASA Astrophysics Data System (ADS)

Zhu, Rongwei; Liu, Hailing; Yao, Yongjian; Wang, Yin

2018-05-01

The pre-Eocene history of the region around the present South China Sea is not well known. New multi-channel seismic profiles provide valuable insights into the probable Mesozoic history of this region. Detailed structural and stratigraphic interpretations of the multi-channel seismic profiles, calibrated with relevant drilling and dredging data, show major Mesozoic structural features. A structural restoration was done to remove the Cenozoic tectonic influence and calculate the Mesozoic tectonic compression ratios. The results indicate that two groups of compressive stress with diametrically opposite orientations, S(S)E-N(N)W and N(N)W-S(S)E, were active during the Mesozoic. The compression ratio values gradually decrease from north to south and from west to east in each stress orientation. The phenomena may be related to the opening of the proto-South China Sea (then located in south of the Nansha block) and the rate at which the Nansha block drifted northward in the late Jurassic to late Cretaceous. The Nansha block drifted northward until it collided and sutured with the southern China margin. The opening of the present South China Sea may be related to this suture zone, which was a tectonic zone of weakness.

History of India-Asia Suturing in Tibet: Constraints and Questions

NASA Astrophysics Data System (ADS)

Kapp, P. A.; Ding, L.

2011-12-01

The India-Asia collision zone is widely pointed to as the type Cenozoic example of continental suturing and collision, yet there remains considerable controversy about its geological and geodynamical evolution. This in part may reflect the richness and complexity of the geological records exposed across the collision zone and how much remains to be extracted from them. Separating the formerly Andean-style continental margin of southern Asia (Gangdese arc and forearc of the Lhasa terrane) in the north, from Indian-affinity strata deformed in the Tethyan Himalayan thrust belt to the south, is the Indus-Yarlung suture zone (IYSZ). In Tibet, ophiolitic rocks along the IYSZ crystallized and were obducted in a suprasubduction zone setting during Early Cretaceous time. The ophiolitic rocks are of the appropriate age to have formed the basement upon which Gangdese forearc strata accumulated. Alternatively, they may represent remnants of an intra-oceanic subduction system that persisted in the Tethys, far from Asia, until Greater India collided with it during the latest Cretaceous to Paleocene. There has been no documentation, however, of ophiolitic or arc fragments younger than Early Cretaceous within the IYSZ. Distinguishing between these two end-member scenarios is important for interpreting detrital records of orogenesis and seismic tomographic images of the mantle. A preponderance of evidence suggests that collision between the Tethyan Himalaya and Asia initiated by 52 Ma. Initial collision led abruptly to profound and far-field changes in paleogeography and tectonism such that by 45 Ma, major shortening and potassic volcanism was ongoing in northern Tibet, plateau-like conditions were established in central Tibet, Tethyan Himalayan crust was undergoing anatexis, and Eo-Himalayan prograde metamorphism was underway. Additional constraints on the shortening history of the Tethyan Himalayan thrust belt will be key to assessing when and how much Greater Indian lithosphere was subducted northward beneath Asia during the Paleogene. Large-scale northward underthrusting of Greater Indian lithosphere (>600 km between 45 and 30 Ma), its subsequent rapid rollback to the south of the IYSZ (30 - 20 Ma), and renewed northward underthrusting (15 Ma to Recent), is inferred from north-south temporal sweeps in Cenozoic magmatism in Tibet. This history of Greater Indian lithosphere subduction may help explain major transitions in the kinematic evolution of the Himalayan-Tibetan orogen and can account for more than half of the total convergence between India and Asia since 50 Ma.

Management of postkeratoplasty astigmatism by paired arcuate incisions with compression sutures.

PubMed

Fares, Usama; Mokashi, Aashish A; Al-Aqaba, Mouhamed Ali; Otri, Ahmad Muneer; Miri, Ammar; Dua, Harminder Singh

2013-04-01

To analyse the efficacy of paired arcuate incisions and compression sutures technique in the management of post penetrating keratoplasty (PK) astigmatism. A paired arcuate incision with compression sutures procedure was used to treat 26 eyes with post-PK astigmatism ranging from 6.00 to 16.50 dioptres (D). The incisions were placed at the 7.0 mm optical zone inside the graft-host junction at a depth of 80% of corneal thickness. A 45° paired arc length was planned for eyes with preoperative astigmatism between 6D and 9D, and a 60° paired arc length was planned for eyes with preoperative astigmatism of >9D. At 3 months, corneal topography and refraction was performed and suture(s) removed if indicated. Net and vector astigmatism changes were calculated to determine the efficacy of the procedure. The indications for PK included keratoconus, Fuch's endothelial dystrophy, pseudophakic bullous keratopathy and corneal scar. There was a statistically significant reduction in the mean magnitude of astigmatism from 9.66 ± 2.90D preoperatively to 4.37 ± 2.53D postoperatively in the whole group. The mean decrease in the astigmatism was 4.37 ± 2.05D (58.4%) and 6.23 ± 3.63D (52.6%) in patients with 6-9D and >9D, respectively. Vector power calculations also showed a significant astigmatism reduction in all groups. The safety and efficacy indices were 1.40 and 0.28, respectively. Manual astigmatic keratotomy is a viable technique with relatively good safety and efficacy outcomes. Based on the results we propose that increasing the arc length to a minimum of 60° for astigmatism of 6-9D, and to 75° for astigmatism >9D, is likely to have a greater beneficial effect.

Constraints on crustal structure in the Southeastern United States from the SUGAR 2 refraction seismic refraction experiment

NASA Astrophysics Data System (ADS)

Marzen, R. E.; Shillington, D. J.; Lizarralde, D.; Harder, S. H.

2016-12-01

The Southeastern United States is an ideal location to study the interactions between continental collision, extensive but short-lived magmatism, and continental rifting. Continental collision during the Alleghenian Orogeny ( 290 Ma) formed the supercontinent Pangea. Extension leading to the breakup of Pangea began 230 Ma, forming the South Georgia Basin and other rift basins. The extensive Central Atlantic Magmatic Province (CAMP) magmatism was emplaced at 200 Ma, and continental separation occurred afterwards. During these processes, part of the African continent was added to North America. Prior work has raised questions including (1) the location and geometry of the suture zone and implications for the style of collision (thin-skinned versus thick-skinned), (2) the role of pre-existing structures on later rifting, and (3) the distribution of magmatism, and possible relationships between magmatism and rifting. To address these questions, we present preliminary velocity models for the 400-km-long refraction seismic line from the SUwanee Suture and GA Rift basin experiment (SUGAR) Line 2. This line is central to CAMP magmatism, and crosses the South Georgia rift basin and two hypothesized locations for the ancient suture zone. The data were collected in August 2015 by a team of over 40 students and scientists. Fifteen shots spaced at 20-40 km were recorded by 1981 Texans spaced at 250 m. We observe refractions from the basin, crust, and upper mantle, and wide-angle reflections from the base of the sediments, within the crust, and from the Moho. Prominent mid crustal reflections may arise from the top of elevated lower crustal velocities and possible lower crustal layering. The starting velocity model and constraints on the upper sedimentary basin velocity structure are obtained through forward modeling, which show basin sediment thickness increasing to the South. We then invert for smooth 2D velocity structure using first arrivals (FAST) and a layered velocity model using refractions and reflections (RAYINVR) to evaluate the crust and upper mantle velocity structure. Model results will be compared to other geological and geophysical data, including the roughly parallel SUGAR Line 1, to examine along-strike changes in rift structure, suture structure, and evidence of magmatism.

Cryptic species? Patterns of maternal and paternal gene flow in eight neotropical bats.

PubMed

Clare, Elizabeth L

2011-01-01

Levels of sequence divergence at mitochondrial loci are frequently used in phylogeographic analysis and species delimitation though single marker systems cannot assess bi-parental gene flow. In this investigation I compare the phylogeographic patterns revealed through the maternally inherited mitochondrial COI region and the paternally inherited 7(th) intron region of the Dby gene on the Y-chromosome in eight common Neotropical bat species. These species are diverse and include members of two families from the feeding guilds of sanguivores, nectarivores, frugivores, carnivores and insectivores. In each case, the currently recognized taxon is comprised of distinct, substantially divergent intraspecific mitochondrial lineages suggesting cryptic species complexes. In Chrotopterus auritus, and Saccopteryx bilineata I observed congruent patterns of divergence in both genetic regions suggesting a cessation of gene flow between intraspecific groups. This evidence supports the existence of cryptic species complexes which meet the criteria of the genetic species concept. In Glossophaga soricina two intraspecific groups with largely sympatric South American ranges show evidence for incomplete lineage sorting or frequent hybridization while a third group with a Central American distribution appears to diverge congruently at both loci suggesting speciation. Within Desmodus rotundus and Trachops cirrhosus the paternally inherited region was monomorphic and thus does not support or refute the potential for cryptic speciation. In Uroderma bilobatum, Micronycteris megalotis and Platyrrhinus helleri the gene regions show conflicting patterns of divergence and I cannot exclude ongoing gene flow between intraspecific groups. This analysis provides a comprehensive comparison across taxa and employs both maternally and paternally inherited gene regions to validate patterns of gene flow. I present evidence for previously unrecognized species meeting the criteria of the genetic species concept but demonstrate that estimates of mitochondrial diversity alone do not accurately represent gene flow in these species and that contact/hybrid zones must be explored to evaluate reproductive isolation.

Ages, geochemistry and tectonic implications of the Cambrian igneous rocks in the northern Great Xing'an Range, NE China

NASA Astrophysics Data System (ADS)

Feng, Zhiqiang; Liu, Yongjiang; Li, Yanrong; Li, Weimin; Wen, Quanbo; Liu, Binqiang; Zhou, Jianping; Zhao, Yingli

2017-08-01

The Xinlin-Xiguitu suture zone, located in the Great Xing'an Range, NE China, in the eastern segment of the Central Asian Orogenic Belt (CAOB), represents the boundary between the Erguna and Xing'an micro-continental blocks. The exact location of the Xinlin-Xiguitu suture zone has been debated, especially, the location of the northern extension of the suture zone. In this study, based on a detailed field, geochemical, geochronological and Sr-Nd-Hf isotope study, we focus our work on the Cambrian igneous rocks in the Erguna-Xing'an block. The Xinglong granitoids, mainly include ∼520 Ma diorite, ∼470 Ma monzogranite and ∼480 Ma pyroxene diorite. The granitoids show medium to high-K calc-alkaline series characteristics with post-collision granite affinity. The circa 500 Ma granitoids have low εHf (t) values (-16.6 to +2.2) and ancient two-stage model (TDM2) ages between 1317 Ma and 2528 Ma. These results indicate the primary magmas of the Xinglong granitoids were probably derived from the partial melting of a dominantly Paleo-Mesoproterozoic ;old; crustal source with possible different degrees of addition of juvenile materials, and formed in a post-collision tectonic setting after the amalgamation of the Erguna and Xing'an blocks. Compared with the Xinglong granitoids, the Duobaoshan igneous rocks are consisted of the approximately coeval rhyolitic tuffs (491 ± 5 Ma) and ultramafic intrusions (497 ± 5 Ma) within the Duobaoshan Formation. They are generally enriched in large ion lithophile elements (LILEs) and depleted in high field strength elements (HFSEs; e.g., Nb, Ta, and Ti), consistent with the geochemistry of igneous rocks from island arcs or active continental margins. The ultramafic rocks have high positive εHf (t) values (+1.3 to +15) and εNd (t) (+1.86 to +2.28), and relatively young two-stage model (TDM2) ages and low initial 87Sr/86Sr ratios (0.70628-0.70853), indicating the partial melting of a depleted mantle source from a subducted slab in the ocean basin between the Erguna-Xing'an and Songliao blocks. The rhyolitic tuffs contain a group of Phanerozoic zircons with εHf (t) values (-4.6 to +15.0), suggesting that the rhyolitic tuffs were derived from juvenile lower crustal material with some ancient crustal material. Coupled with our previous geochemical and isotopic studies on Early Paleozoic igneous rocks, we proposed that the collision of the Erguna and Xing'an blocks at least took place ca. 500 Ma ago, and that there exist in a westward subduction of an oceanic plate between the Eruguna-Xing'an and Songliao blocks, took place during the Early Ordovician. Up to now, there are more evidences and constraints that the northern extension location of the Xinlin-Xiguitu suture zone is located in the Jifeng-Xinglong areas.

Mapping the Influence of Prior Tectonism on Seismicity in the Central and Eastern US

NASA Astrophysics Data System (ADS)

Boyd, O. S.; Levandowski, W.; Ramirez-Guzman, L.; Zellman, M.; Briggs, R.

2015-12-01

From the Atlantic margin to the Rockies, most earthquakes in the central and eastern U.S. occur in ancient tectonic zones, yet many such features have been historically quiescent. If all intraplate stress were transferred from plate boundaries or bases, the stress field would be broadly uniform, with all well-oriented faults equally likely to slip. But faults are not the only product of tectonism; intrusions, metamorphism, or any number of other alterations may modify crustal and/or upper mantle density, leaving behind lithostatic pressure gradients that can locally elevate or reduce stress on faults. With data provided by Earthscope, we are working to map lithospheric density across the U.S. and to quantify gravitational body-forces using analytical and finite-element methods. Regional-scale 3D models show that gravitational forces focus seismicity and reorient principal stress both in the New Madrid seismic zone and the western Great Plains. Sedimentary fill and low elevation encourage Reelfoot Rift-normal contraction, yet along-strike variations in lower crustal density rotate body-forces beneath New Madrid to interfere constructively with far-field compression, augmenting differential stress by 5-10 MPa. On the plains of SE Colorado and SE Wyoming, the Cheraw and Wheatland/Whalen faults collocate with multiply reactivated Proterozoic sutures, enigmatic Quaternary extension, and focused seismicity with regionally anomalous NW-SE moment tensor T-axes. Earthscope data help reveal anomalously buoyant lower crust beneath each suture -­- which we hypothesize reflects hydration by Farallon slab-derived fluids that have preferentially migrated along ancient fracture networks -- that generates 10 MPa of localized suture-normal tension, consistent with geomorphic strain- and seismic stress-indicators. As continent-wide seismic models emerge from Earthscope data, we will continue to map regions where inherited structures encourage intraplate seismicity.

Lutetian arc-type magmatism along the southern Eurasian margin: New U-Pb LA-ICPMS and whole-rock geochemical data from Marmara Island, NW Turkey

NASA Astrophysics Data System (ADS)

Ustaömer, P. Ayda; Ustaömer, Timur; Collins, Alan S.; Reischpeitsch, Jörg

2009-07-01

The rocks of Turkey, Greece and Syria preserve evidence for the destruction of Tethys, the construction of much of the continental crust of the region and the formation of the Tauride orogenic belt. These events occurred between the Late Cretaceous and Miocene, but the detailed evolution of the southern Eurasian margin during this period of progressive continental accretion is largely unknown. Marmara Island is a basement high lying at a key location in the Cenozoic Turkish tectonic collage, with a Palaeogene suture zone to the south and a deep Eocene sedimentary basin to the north. North-dipping metamorphic thrust sheets make up the island and are interlayered with a major metagranitoid intrusion. We have dated the intrusion by Laser Ablation ICP-MS analysis of U and Pb isotopes on zircon separates to 47.6 ± 2 Ma. We also performed major- and trace-elemental geochemical analysis of 16 samples of the intrusion that revealed that the intrusion is a calc-alkaline, metaluminous granitoid, marked by Nb depletion relative to LREE and LIL-element enrichment when compared to ocean ridge granite (ORG). We interpret the metagranitoid sill as a member of a mid-Eocene magmatic arc, forming a 30 km wide and more than 200 km long arcuate belt in NW Turkey that post-dates suturing along the İzmir-Ankara-Erzincan Suture zone. The arc magmatism was emplaced at the early stages of mountain building, related to collision of Eurasia with the Menderes-Taurus Platform in early Eocene times. Orogenesis and magmatism loaded the crust to the north creating coeval upward-deepening marine basins partially filled by volcanoclastic sediments.

Cryptic or pseudocryptic: can morphological methods inform copepod taxonomy? An analysis of publications and a case study of the Eurytemora affinis species complex

PubMed Central

Lajus, Dmitry; Sukhikh, Natalia; Alekseev, Victor

2015-01-01

Interest in cryptic species has increased significantly with current progress in genetic methods. The large number of cryptic species suggests that the resolution of traditional morphological techniques may be insufficient for taxonomical research. However, some species now considered to be cryptic may, in fact, be designated pseudocryptic after close morphological examination. Thus the “cryptic or pseudocryptic” dilemma speaks to the resolution of morphological analysis and its utility for identifying species. We address this dilemma first by systematically reviewing data published from 1980 to 2013 on cryptic species of Copepoda and then by performing an in-depth morphological study of the former Eurytemora affinis complex of cryptic species. Analyzing the published data showed that, in 5 of 24 revisions eligible for systematic review, cryptic species assignment was based solely on the genetic variation of forms without detailed morphological analysis to confirm the assignment. Therefore, some newly described cryptic species might be designated pseudocryptic under more detailed morphological analysis as happened with Eurytemora affinis complex. Recent genetic analyses of the complex found high levels of heterogeneity without morphological differences; it is argued to be cryptic. However, next detailed morphological analyses allowed to describe a number of valid species. Our study, using deep statistical analyses usually not applied for new species describing, of this species complex confirmed considerable differences between former cryptic species. In particular, fluctuating asymmetry (FA), the random variation of left and right structures, was significantly different between forms and provided independent information about their status. Our work showed that multivariate statistical approaches, such as principal component analysis, can be powerful techniques for the morphological discrimination of cryptic taxons. Despite increasing cryptic species designations, morphological techniques have great potential in determining copepod taxonomy. PMID:26120427

Electromagnetic study of lithospheric structure in Trans-European Suture Zone in Poland

NASA Astrophysics Data System (ADS)

Jóźwiak, Waldemar; Ślęzak, Katarzyna; Nowożyński, Krzysztof; Neska, Anne

2016-04-01

The area covered by magnetotelluric surveys in Poland is mostly related to the Trans-European Suture Zone (TESZ), the largest tectonic boundary in Europe. Numerous 1D, 2D, and pseudo-3D and 3D models of the electrical resistivity distribution were constructed, and a new interpretation method based on Horizontal Magnetic Tensor analysis has been applied recently. The results indicate that the TESZ is a lithospheric discontinuity and there are noticeable differences in geoelectric structures between the East European Craton (EEC), the transitional zone (TESZ), and the Paleozoic Platform (PP). The electromagnetic sounding is a very efficient tool for recognizing the lithospheric structure especially it helps in identification of important horizontal (or lateral) inhomogeneities in the crust. Due to our study we can clearly determine the areas of the East European Craton of high resistivity, Paleozoic Platform of somewhat lower resistivity value, and transitional TESZ of complicated structure. At the East European Craton, we observe very highly resistive lithosphere, reaching 220-240 km depth. Underneath, there is distinctly greater conductivity values, most probably resulting from partial melting of rocks; this layer may represent the asthenosphere. The resistivity of the lithosphere under the Paleozoic Platform is somewhat lower, and its thickness does not exceed 150 km. The properties of the lithosphere in the transition zone, under the TESZ, differ significantly. The presented models include prominent, NW-SE striking conductive lineaments. These structures, that related with the TESZ, lie at a depth of 10-30 km. They are located in a mid-crustal level and they reach the boundary of the EEC. The structures we initially connect to the Variscan Deformation Front (VDF) and the Caledonian Deformation Front (CDF). The differentiation of conductivity visible in the crust continues in the upper mantle.

Subsurface signature of North Anatolian Fault Zone and its relation with old sutures: New insight from receiver function analysis.

NASA Astrophysics Data System (ADS)

Özacar, Arda A.; Abgarmi, Bizhan

2017-04-01

The North Anatolian Fault Zone (NAFZ) is an active continental transform plate boundary that accommodates the westward extrusion of the Anatolian plate. The central segment of NAFZ displays northward convex surface trace which coincides partly with the Paleo-Tethyan suture formed during the early Cenozoic. The depth extent and detailed structure of the actively deforming crust along the NAF is still under much debate and processes responsible from rapid uplift are enigmatic. In this study, over five thousand high quality P receiver functions are computed using teleseismic earthquakes recorded by permanent stations of national agencies and temporary North Anatolian Fault Passive Seismic experiment (2005-2008). In order to map the crustal thickness and Vp/Vs variations accurately, the study area is divided into grids with 20 km spacing and along each grid line Moho phase and its multiples are picked through constructed common conversion point (CCP) profiles. According to our results, nature of discontinuities and crustal thickness display sharp changes across the main strand of NAFZ supporting a lithospheric scale faulting that offsets Moho discontinuity. In the southern block, crust is relatively thin in the west ( 35 km) and becomes thicker gradually towards east ( 40 km). In contrast, the northern block displays a strong lateral change in crustal thickness reaching up to 10 km across a narrow roughly N-S oriented zone which is interpreted as the subsurface signature of the ambiguous boundary between Istanbul Block and Pontides located further west at the surface.

From an ocean floor wrench zone origin to transpressional tectonic emplacement of the Sithonia ophiolite, eastern Vardar Suture Zone, northern Greece

NASA Astrophysics Data System (ADS)

Bonev, Nikolay; Filipov, Petyo

2017-12-01

In the Hellenides of northern Greece, the Sithonia back-arc ophiolite constitute an element of the Vardar suture zone against the Chortiatis island arc magmatic suite, the Melissochori Formation and the Serbo-Macedonian Massif further north at the Mesozoic continental margin of Eurasia. A granodiorite from the Chortiatis island arc magmatic suite crystallized at 160 Ma as derived from new U-Pb zircon geochronology and confirms the end of arc magmatic activity that started at around 173 Ma. Located southerly of the Chortiatis island arc magmatic suite, the Sithonia ophiolite had igneous life from 159 to 149 Ma, and the ophiolite interfinger with clastic-carbonate Kimmeridgian sediments. Magmatic structures (i.e., sheeted dykes) in the ophiolite witness for NE-trending rift axis, while the transform faults and fracture zones sketch NW-SE transcurrent transtension-like propagation of the rift-spreading center at Sithonia that is consistent with a dextral wrench corridor already proposed for the ophiolite origin in the eastern Vardar zone. The tectonic emplacement of the Sithonia ophiolite involved dextral ENE to SE strike-slip sense of shear and SW and NE reverse thrust sense of shear on mostly steep foliation S1, subhorizontal lineation L1 and associated variably inclined F1 fold axes. This structural grain and kinematics are shared by adjacent Chortiatis island arc magmatic suite and the Melissochori Formation. The coexistence of strike-parallel and thrust components of displacement along discrete dextral strike-slip shear zones and internal deformation of the mentioned units is interpreted to result from a bulk dextral transpressive deformation regime developed in greenschist-facies metamorphic conditions. The back-arc ocean floor previous structural architecture with faults and fracture zones where Kimmeridgian sediments deposited in troughs was used by discrete strike-slip shear zones in which these sediments involved, and the shear zones become the sites for strain partitioning of transpressional deformation. Available biostratigraphic and radiometric age constraints define latest Jurassic-earliest Cretaceous (Tithonian-Berriasian to early Valanginian) time frame for the Sithonia ophiolite northeastward tectonic emplacement accomodated by dextral transpression that led to the ophiolite accretion to the Chortiatis island arc magmatic suite and its trench-fill exposed in the Melissochori Formation and further north toward the Serbo-Macedonian margin of Eurasia.

Mitochondrial lineage sorting in action – historical biogeography of the Hyles euphorbiae complex (Sphingidae, Lepidoptera) in Italy

PubMed Central

2013-01-01

Background Mitochondrial genes are among the most commonly used markers in studies of species’ phylogeography and to draw conclusions about taxonomy. The Hyles euphorbiae complex (HEC) comprises six distinct mitochondrial lineages in the Mediterranean region, of which one exhibits a cryptic disjunct distribution. The predominant mitochondrial lineage in most of Europe, euphorbiae, is also present on Malta; however, it is nowadays strangely absent from Southern Italy and Sicily, where it is replaced by 'italica'. A separate biological entity in Italy is further corroborated by larval colour patterns with a congruent, confined suture zone along the Northern Apennines. By means of historic DNA extracted from museum specimens, we aimed to investigate the evolution of the mitochondrial demographic structure of the HEC in Italy and Malta throughout the Twentieth Century. Results At the beginning of the Twentieth Century, the European mainland lineages were also present at a moderate frequency in Southern Italy and Sicily. The proportion of 'italica' then steadily increased in this area from below 60 percent to near fixation in about 120 years. Thus, geographical sorting of mitochondrial lineages in the HEC was not as complete then as the current demography suggests. The pattern of an integral 'italica' core region and a disjunct euphorbiae distribution evolved very recently. To explain these strong demographic changes, we propose genetic drift due to anthropogenic habitat loss and fragmentation in combination with an impact from recent climate warming that favoured the spreading of the potentially better adapted 'italica' populations. Conclusions The pattern of geographically separated mitochondrial lineages is commonly interpreted as representing long term separated entities. However, our results indicate that such a pattern can emerge surprisingly quickly, even in a widespread and rather common taxon. We thus caution against drawing hasty taxonomic conclusions from biogeographical patterns of mitochondrial markers derived from modern sampling alone. PMID:23594258

What collided with India at ~50 Ma? Constraints from the sedimentary record in the NW Himalaya, Ladakh.

NASA Astrophysics Data System (ADS)

Najman, Y.; Jenks, D.; Godin, L.; BouDagher-Fadel, M. K.; Bown, P. R.; Horstwood, M. S.; Garzanti, E.; Bracciali, L.; Millar, I.

2014-12-01

The timing of India-Asia collision is critical to the understanding of crustal deformation processes. In the NW Himalaya, a number of workers have proposed a ~55-50 Ma age for collision along the Indus suture zone which separates India from the Kohistan-Ladakh Intraoceanic Island arc (KLA) to the north. This is based on a number of factors including the age of youngest marine sediments in the suture (e.g. Green et al. 2008), age of eclogites indicative of onset of Indian continental subduction (e.g. de Sigoyer et al. 2000), and first evidence of detritus from north of the suture zone deposited on the Indian plate (e.g. Clift et al. 2002). Such evidence can be interpreted as documenting the age of India-Asia collision if one takes the KLA to have collided with the Asian plate prior to its collision with India (e.g. Petterson 2010 and refs therein). However, an increasing number of workers propose that the KLA collided with Asia subsequent to its earlier collision with India, dated variously at 85 Ma (Chatterjee et al. 2013), 61 Ma (Khan et al. 2009) and 50 Ma (Bouilhol et al. 2013). If correct, then the previous constraints to dating the collision as outlined above have in fact been dating the timing of India-arc collision, rather than the final ocean closure and terminal collision of India+arc with Asia as previously believed. This, plus the questioning of earlier provenance work of Clift et al. (2002) regarding the validity of their data for constraining the time when detritus from north of the suture first arrived on the Indian plate (Henderson et al. 2011) suggests that the time is right for a reappraisal of this topic. But which method to use? A provenance study now brings with it a requirement to distinguish between detritus from the KLA and Southern margin of Asia. Recently, Bouilhol et al (2013) undertook a detailed study of the KLA, using temporal and spatial variation of zircon U-Pb and Hf as well as Sr-Nd bulk analyses, to document the arc's collision with India at 50 Ma and its subsequent collision with Asia at 40 Ma. Such variation should be reflected in the detrital record of material eroded from the arc. We use zircon U-Pb and Hf analyses from Palaeogene sediments deposited in and adjacent to the Indus suture in Ladakh, to further explore the interpretations presented in that research.

Late Cretaceous - recent lithosphere scale evolution of Turkey: linking the crustal surface evolution to the structure of the mantle

NASA Astrophysics Data System (ADS)

Bartol, J.; Govers, R. M. A.; Wortel, M. J. R.

2015-12-01

Central Anatolia (Central Turkey) possesses all the characteristics of a plateau. It experienced a period of rapid and substantial uplift (late Miocene, ˜8 Ma) while significant crustal shortening did not occur. Similar to other plateaus, the presence of volcanic ash and tuff within the sediments suggest that uplift was preceded by widespread volcanism (˜14-9Ma). The lithospheric context of these events is, however, unknown. For the Eastern Anatolian plateau, similar events have been attributed to southward retread followed by slab break-off of the northern Neotethys slab. Recent tomographic results indicate that this northern Neotethys slab extended beneath both the Eastern and Central Anatolian plateau prior to late Miocene delamination and possibly even beneath western Anatolia prior to the Eocene (?). We propose a new lithospheric scenario for the regional evolution for the Aegean-Anatolia-Near East region that combines a recent compilation of surface geology data with the structure of the upper mantle imaged with tomography. In our new scenario for the evolution of the Aegean-Anatolia-Near East region, a single continuous subduction zone south of the Pontides (Izmir - Ankara - Erzincan crustal suture zone) accommodated the Africa - Eurasia convergence until the end of the late Cretaceous. In the Late Cretaceous - Eocene the northern Neotethys Ocean closed followed by Anatolide - Taurides (south) and Pontides (north) continental collision along the Izmir - Ankara - Erzincan crustal suture zone. While the trench jumped to the south of Anatolide - Taurides terrane, subduction continued beneath the Izmir-Ankara-Erzincan suture where the northern Neotethys slab continued to sink into the deeper mantle. In the early Miocene (˜20-15Ma), the northern Neotethys slab started to retreat southward towards the trench, resulting in delamination of the lithospheric mantle. The last part of (early Miocene - recent) our scenario is testable. We use a coupled thermal-flexural model of the lithosphere. Model results show that delamination can explain the average present-day long-wavelength topography of the Central Anatolian plateau. For the Eastern Anatolian plateau, delamination explains half the present-day elevation: the other half resulted from crustal thickening.

The "Parachute" Technique: A Simple and Effective Single-Row Procedure to Achieve an Increased Contact Area Between the Cuff-Tendon and Its Footprint.

PubMed

Natera, Luis; Consigliere, Paolo; Witney-Lagen, Caroline; Brugera, Juan; Sforza, Giuseppe; Atoun, Ehud; Levy, Ofer

2017-10-01

Many techniques of arthroscopic rotator cuff repair have been described. No significant differences in clinical outcomes or rerupture rates have been observed when comparing single-row with double-row methods. Not all single- and double-row repairs are the same. The details of the technique used are crucial. It has been shown that the suture-tendon interface is the weakest point of the reconstruction. Therefore, the biomechanical properties of rotator cuff repairs might be influenced more by the suture configuration than by the number of anchors or by the number of rows involved. Techniques that secure less amount of tendon over a smaller area of the healing zone might be expected to have higher failure rates. The way the sutures of the "parachute technique" are configured represents a quadruple mattress that increases the contact and pressure between the tendon and its footprint and increases the primary load to failure of the repair. We present a simple and effective single-row technique that involves the biomechanical and biological advantages related to the increased contact area and pressure between the cuff and its footprint.

Cryptic differentiation in the endemic micromoth Galagete darwini (Lepidoptera, Autostichidae) on Galápagos volcanoes.

PubMed

Schmitz, Patrick; Cibois, Alice; Landry, Bernard

2008-10-27

To gain insight into the early stages of speciation, we reconstructed a DNA-based phylogeny, using combined mitochondrial (cytochrome c oxidase subunits I and II: 1008 bp) and nuclear (elongation factor 1-alpha and wingless: 1062 bp) markers of populations of the moth Galagete darwini endemic to the Galápagos, which belongs to an insular radiation similar in size to that of Darwin's finches. Adults of G. darwini were collected in the arid lowlands of 11 of the Galápagos Islands (Baltra, Española, Fernandina, Floreana, Isabela, Pinta, Pinzón, San Cristobal, Santa Cruz, Santiago and Seymour) and the humid highlands of a subset of 5 of them (Fernandina, Floreana, Isabela, Santa Cruz and Santiago). The combined phylogeographic analysis surprisingly revealed that G. darwini populations at higher elevation on the western islands (Fernandina, Isabela and Santiago) represent a distinct lineage from the one in the low arid zones of these same islands. This is the first reported case in the archipelago of genetic cryptic differentiation correlated with elevation on the western Galápagos volcanoes.

Implications of historical eruptive-vent migration on the northeast rift zone of Mauna Loa Volcano, Hawaii

NASA Astrophysics Data System (ADS)

Lockwood, John P.

1990-07-01

Five times within the past 138 yr (1852, 1855-1856, 1880-1881, 1942, and 1984), lava flows from vents on the northeast rift zone of Mauna Loa Volcano have reached within a few kilometres of Hilo (the largest city on the Island of Hawaii). Most lavas erupted on this rift zone in historical time have traveled northeastward (toward Hilo), because their eruptive vents have been concentrated north of the rift zone's broad topographic axis. However, with few exceptions each successive historical eruption on the northeast rift zone has occurred farther southeast than the preceding one. Had the 1984 eruptive vents (the most southeasterly yet) opened less than 200 m farther southeast, the bulk of the 1984 lavas would have flowed away from Hilo. If this historical vent-migration pattern continues, the next eruption on the northeast rift zone could send lavas to the southeast, toward less populated areas. The historical Mauna Loa vent-migration patterns mimic the southeastern "younging" of the Hawaiian-Emperor volcanic chain and may be cryptically related to northwestward movement of the Pacific plate. Systematic temporal-spatial vent-migration patterns may characterize eruptive activity at other volcanoes with flank activity and should be considered as an aid to long-term prediction of eruption sites.

DNA barcoding, ecology and geography of the cryptic species of Aneura pinguis and their relationships with Aneura maxima and Aneura mirabilis (Metzgeriales, Marchantiophyta)

PubMed Central

Szczecińska, Monika; Sawicki, Jakub; Stebel, Adam; Buczkowska, Katarzyna

2017-01-01

Aneura pinguis is a thalloid liverwort species with broad geographical distribution. It is composed of cryptic species, however, the number of cryptic species within A. pinguis is not known. Five cpDNA regions (matK, rbcL, rpoC1, trnH-psbA and trnL-trnF) and the entire nuclear ITS region were studied in 130 samples of A. pinguis from different geographical regions. The relationships between the cryptic species of A. pinguis, A. maxima and A. mirabilis were analyzed. All of the examined samples were clustered into 10 clades corresponding to 10 cryptic species of A. pinguis (marked A to J). Aneura mirabilis and A. maxima were nested among different cryptic species of A. pinguis, which indicates that A. pinguis is a paraphyletic taxon. Subgroups were found in cryptic species A, B, C and E. As single barcodes, all tested DNA regions had 100% discriminant power and fulfilled DNA barcode criteria for species identification; however, the only combination detected in all subgroups was trnL-trnF with trnH-psbA or ITS2. The distances between cryptic species were 11- to 35-fold higher than intraspecific distances. In all analyzed DNA regions, the distances between most pairs of cryptic A. pinguis species were higher than between A. maxima and A. mirabilis. All cryptic species of A. pinguis clearly differed in their habitat preferences, which suggests that habitat adaptation could be the main driving force behind cryptic speciation within this taxon. PMID:29206876

DNA barcoding, ecology and geography of the cryptic species of Aneura pinguis and their relationships with Aneura maxima and Aneura mirabilis (Metzgeriales, Marchantiophyta).

PubMed

Bączkiewicz, Alina; Szczecińska, Monika; Sawicki, Jakub; Stebel, Adam; Buczkowska, Katarzyna

2017-01-01

Aneura pinguis is a thalloid liverwort species with broad geographical distribution. It is composed of cryptic species, however, the number of cryptic species within A. pinguis is not known. Five cpDNA regions (matK, rbcL, rpoC1, trnH-psbA and trnL-trnF) and the entire nuclear ITS region were studied in 130 samples of A. pinguis from different geographical regions. The relationships between the cryptic species of A. pinguis, A. maxima and A. mirabilis were analyzed. All of the examined samples were clustered into 10 clades corresponding to 10 cryptic species of A. pinguis (marked A to J). Aneura mirabilis and A. maxima were nested among different cryptic species of A. pinguis, which indicates that A. pinguis is a paraphyletic taxon. Subgroups were found in cryptic species A, B, C and E. As single barcodes, all tested DNA regions had 100% discriminant power and fulfilled DNA barcode criteria for species identification; however, the only combination detected in all subgroups was trnL-trnF with trnH-psbA or ITS2. The distances between cryptic species were 11- to 35-fold higher than intraspecific distances. In all analyzed DNA regions, the distances between most pairs of cryptic A. pinguis species were higher than between A. maxima and A. mirabilis. All cryptic species of A. pinguis clearly differed in their habitat preferences, which suggests that habitat adaptation could be the main driving force behind cryptic speciation within this taxon.

Preliminary study of lateral variation in crustal structure of Northeast China from teleseismic receiver functions

NASA Astrophysics Data System (ADS)

Chen, Youlin; Liu, Ruifeng; Huang, Zhibin; Sun, Li

2011-02-01

We conducted comprehensive receiver function analyses for a large amount of high-quality broadband teleseismic waveforms data recorded at 19 China National Digital Seismic Network (CNDSN) stations deployed in Northeast China. An advanced H- κ domain search method was adopted to accurately estimate the crustal thickness and ν P/ ν S ratio. The crust has an average thickness of about 34.4 km. The thinnest crust occurs in the central region of Northeast China, while the thickest crust is beneath the Yanshan belt. The ν P/ ν S ratio is relatively uniform with an average of about 1.733. The highest ν P/ ν S ratio is found beneath the Changbaishan, likely associated with its volcanic activities. We found significant lateral heterogeneity beneath three stations CN2, MDJ, and MIH located along the Suolon suture from the back-zimuthal dependence of Moho depth. The velocity modeling from receiver functions indicated complicated Earth structure beneath these stations with large crust-mantle transition zone, noticeable velocity jump in upper mantle, and low velocity zone in middle crust. Dipping velocity interface in the crust with strike approximately parallel to the Suolon suture and down-dip to the south or southeast might explain the observed lateral heterogeneity.

The initial break-up of Pangæa elicited by Late Palæozoic deglaciation.

PubMed

Yeh, Meng-Wan; Shellnutt, J Gregory

2016-08-11

The break-up of Pangæa was principally facilitated by tensional plate stress acting on pre-existing suture zones. The rifting of Pangæa began during the Early Permian along the southern Tethys margin and produced the lenticular-shaped continent known as Cimmeria. A mantle-plume model is ascribed to explain the rift-related volcanism but the NW-SE oriented Cimmerian rifts do not correlate well with pre-existing suture zones or 'structural heterogeneities' but appear to have a pertinent spatial and temporal association with Late Palæozoic glacial-interglacial cycles. Mantle potential temperature estimates of Cimmerian rift-related basalts (1410 °C ± 50 °C) are similar to ambient mantle conditions rather than an active mantle-plume rift as previously suggested. Moreover, we find that the distribution of glacial deposits shows significant temporal and spatial concurrence between the glacial retreat margins and rifting sites. We conclude that the location and timing of Cimmerian rifting resulted from the exploitation of structural heterogeneities within the crust that formed due to repeated glacial-interglacial cycles during the Late Palæozoic. Such effects of continental deglaciation helped to create the lenticular shape of Cimmeria and Neotethys Ocean suggesting that, in some instances, climate change may directly influence the location of rifting.

Revised version of the Cenozoic Collision along the Zagros Orogen, Insights from Cr-spinel and Sandstone Modal Analyses.

PubMed

Gholami Zadeh, Parisa; Adabi, Mohammad Hossein; Hisada, Ken-Ichiro; Hosseini-Barzi, Mahboubeh; Sadeghi, Abbas; Ghassemi, Mohammad Reza

2017-09-07

Geoscientists have always considered the Neyriz region, located along the Zagros Suture Zone, an important area of interest because of the outcrops of Neotethys ophiolitic rocks. We carried out a modal analysis of the Cenozoic sandstones and geochemistry of the detrital Cr-spinels at Neyriz region in order to determine their provenance and tectonic evolution in the proximal part of Zagros Basin. Our data shows a clear change in provenance from the Late Cretaceous onwards. As from the Late Cretaceous to Eocene, lithic grains are mostly chert and serpentinite; and higher Cr# values of the detrital Cr-spinel compositions indicate that they originate from the fore-arc peridotites and deposited in an accretionary prism setting during this period. From the Late Oligocene to the Miocene periods, volcaniclastic and carbonate lithic grains show an increasing trend, and in the Miocene, metasedimentary lithic grains appear in the sediments. Ophiolite obduction caused a narrow trough sub-basin to be formed parallel to the general trend of the Zagros Orogeny between the Arabian and Iranian plates in Oligocene. From the Miocene onwards, the axial metamorphic complex belt was uplifted in the upper plate. Therefore, the collision along the Zagros Suture Zone must have occurred in the Late Oligocene.

An Arabidopsis introgression zone studied at high spatio-temporal resolution: interglacial and multiple genetic contact exemplified using whole nuclear and plastid genomes.

PubMed

Hohmann, Nora; Koch, Marcus A

2017-10-23

Gene flow between species, across ploidal levels, and even between evolutionary lineages is a common phenomenon in the genus Arabidopsis. However, apart from two genetically fully stabilized allotetraploid species that have been investigated in detail, the extent and temporal dynamics of hybridization are not well understood. An introgression zone, with tetraploid A. arenosa introgressing into A. lyrata subsp. petraea in the Eastern Austrian Forealps and subsequent expansion towards pannonical lowlands, was described previously based on morphological observations as well as molecular data using microsatellite and plastid DNA markers. Here we investigate the spatio-temporal context of this suture zone, making use of the potential of next-generation sequencing and whole-genome data. By utilizing a combination of nuclear and plastid genomic data, the extent, direction and temporal dynamics of gene flow are elucidated in detail and Late Pleistocene evolutionary processes are resolved. Analysis of nuclear genomic data significantly recognizes the clinal structure of the introgression zone, but also reveals that hybridization and introgression is more common and substantial than previously thought. Also tetraploid A. lyrata and A. arenosa subsp. borbasii from outside the previously defined suture zone show genomic signals of past introgression. A. lyrata is shown to serve usually as the maternal parent in these hybridizations, but one exception is identified from plastome-based phylogenetic reconstruction. Using plastid phylogenomics with secondary time calibration, the origin of A. lyrata and A. arenosa lineages is pre-dating the last three glaciation complexes (approx. 550,000 years ago). Hybridization and introgression followed during the last two glacial-interglacial periods (since approx. 300,000 years ago) with later secondary contact at the northern and southern border of the introgression zone during the Holocene. Footprints of adaptive introgression in the Northeastern Forealps are older than expected and predate the Last Glaciation Maximum. This correlates well with high genetic diversity found within areas that served as refuge area multiple times. Our data also provide some first hints that early introgressed and presumably preadapted populations account for successful and rapid postglacial re-colonization and range expansion.

Assessing global range expansion in a cryptic species complex: insights from the red seaweed genus Asparagopsis (Florideophyceae).

PubMed

Zanolla, Marianela; Altamirano, María; Carmona, Raquel; De la Rosa, Julio; Souza-Egipsy, Virginia; Sherwood, Alison; Tsiamis, Konstantinos; Barbosa, Ana Márcia; Muñoz, Antonio Román; Andreakis, Nikos

2018-02-01

The mitochondrial genetic diversity, distribution and invasive potential of multiple cryptic operational taxonomic units (OTUs) of the red invasive seaweed Asparagopsis were assessed by studying introduced Mediterranean and Hawaiian populations. Invasive behavior of each Asparagopsis OTU was inferred from phylogeographic reconstructions, past historical demographic dynamics, recent range expansion assessments and future distributional predictions obtained from demographic models. Genealogical networks resolved Asparagopsis gametophytes and tetrasporophytes into four A. taxiformis and one A. armata cryptic OTUs. Falkenbergia isolates of A. taxiformis L3 were recovered for the first time in the western Mediterranean Sea and represent a new introduction for this area. Neutrality statistics supported past range expansion for A. taxiformis L1 and L2 in Hawaii. On the other hand, extreme geographic expansion and an increase in effective population size were found only for A. taxiformis L2 in the western Mediterranean Sea. Distribution models predicted shifts of the climatically suitable areas and population expansion for A. armata L1 and A. taxiformis L1 and L2. Our integrated study confirms a high invasive risk for A. taxiformis L1 and L2 in temperate and tropical areas. Despite the differences in predictions among modelling approaches, a number of regions were identified as zones with high invasion risk for A. taxiformis L2. Since range shifts are likely climate-driven phenomena, future invasive behavior cannot be excluded for the rest of the lineages. © 2017 Phycological Society of America.

Large (9 mm) Deep Anterior Lamellar Keratoplasty with Clearance of a 6-mm Optical Zone Optimizes Outcomes of Keratoconus Surgery.

PubMed

Busin, Massimo; Leon, Pia; Nahum, Yoav; Scorcia, Vincenzo

2017-07-01

To evaluate the outcomes of a 9-mm deep anterior lamellar keratoplasty (DALK) with removal of the deep stroma limited to the central 6-mm optical zone. Prospective, noncomparative, interventional case series. A total of 80 consecutive keratoconic eyes without deep stromal scarring, with at least 1 postoperative examination 1 month after complete suture removal. A standardized DALK was performed, including (1) deep trephination of the recipient bed 450 to 550 μm in depth and 9 mm in diameter; (2) pneumatic dissection; (3) debulking of approximately 80% of the anterior stroma; (4) removal of the deep stroma (bubble roof) from a central 6-mm optical zone; and (5) transplantation of a 9-mm anterior corneal lamella cut by microkeratome-assisted dissection (400-μm head) and sutured with a double running 10-0 nylon suture. Success rate and type of pneumatic dissection obtained; best spectacle-corrected visual acuity (BSCVA), refractive astigmatism (RA), and topographic astigmatism (TA), central corneal thickness (CCT) and endothelial cell density 12 months postoperatively; and intraoperative and postoperative complications. Pneumatic dissection created a "big bubble" in 67 of 80 eyes (83.7%), all of them but 1 (1.5%) being of type 1 according to the classification by Dua et al. After complete suture removal, BSCVA averaged 0.09±0.72 logarithm of the minimum angle of resolution (logMAR) and was ≥20/20 in 28 eyes (35%), ≥20/25 in 54 eyes (67.5%), and ≥20/40 in 76 eyes (95%); RA averaged 3.10±1.30 diopters (D), with 73 eyes (91%) within 4.5 D and none above 6 D; regular TA was detected in 72 eyes (90%); mean CCT was 492±62.10 μm; postoperative endothelial cell density averaged 2026±397cells/mm 2 with a mean cell loss of 11.2%. Intraoperative complications included loss of suction (n = 1) and perforation (n = 4). No conversion to penetrating keratoplasty was necessary. After surgery, double anterior chamber was observed in 2 cases (2.5%), both managed successfully by air filling of the anterior chamber. Stromal rejection was observed in 6 eyes (7.5%) and was reversed with topical steroids in all cases. In keratoconic eyes without deep stromal scars, the combination of a graft larger than conventional ones with limited removal of deep stroma can improve visual and refractive outcomes of DALK, while minimizing the rate of complications. Copyright © 2017 American Academy of Ophthalmology. Published by Elsevier Inc. All rights reserved.

Intimal re-layering technique for type A acute aortic dissection-reconstructing the intimal layer continuity to induce remodeling of the false channel.

PubMed

Neri, Eugenio; Tucci, Enrico; Tommasino, Giulio; Guaccio, Giulia; Ricci, Carmelo; Lucatelli, Pierleone; Cini, Marco; Ceresa, Roberto; Benvenuti, Antonio; Muzzi, Luigi

2018-01-01

Residual false channel is common after repair of type A acute aortic dissection (TAAAD). Starting from our recent series of TAAAD patients we carried out a retrospective analysis, regarding the failure of primary exclusion at the time of the initial operation. We classified the location of the principal entry tears perfusing the residual false channel. The proposed technique represents our attempt to correct the mechanism of false channel perfusion during primary repair. We describe a new technique designed to address some limitations of standard hemiarch aortic replacement. Its goal are: (I) to reinforce the intimal layer at the arch level; (II) to eliminate inter-luminal communications at the arch level using suture lines around the arch vessels; (III) to provide an elephant trunk configuration for further interventions. Between August 2016 and January 2018, 11 patients underwent emergency surgery using this technique; 7 were men; the median age was 74 years. All patients were treated using systemic circulatory arrest under moderate hypothermia (26 °C) and selective cerebral perfusion. All patients had supra-coronary repair; 1 patient had aortic valve replacement + CABG. In the first two patients a manual suture around supra-aortic trunks was used; the subsequent seven patients were treated with a mechanical suture bladeless device. CT scan follow up was performed in all survivors with controls before discharge 3 months and 1 year after operation. No patient died in the operating room and no neurologic deficit was observed in this initial experience. One patient died in POD 5th for low cardiac output syndrome. Median ICU stay was 3 days (IQR, 2-6 days). Hospital mean length of stay was 15.2±8 days. Median cardiopulmonary bypass time was 130 min (IQR, 110-141 min); median arrest time for re-layering was 17 min (IQR, 16-20 min); median total arrest was 36 min (IQR, 29-39 min). Distal aortic anastomosis was performed in zone 0 in 4 patients, zone 1, with innominate replacement, in 5 patients, in zone 2, with branches to innominate and left common carotid arteries, in 2 patients. Median follow up (closing date 06/01/2018) was 443 days (IQR, 262-557 days); no late deaths occurred. No dehiscence at the level of stapler or manual sutures was observed. Proximal 1/3 of the thoracic aorta false channel was obliterated in all cases but one; in 3 cases complete exclusion of the false channel was obtained after operation. In one case stent graft completion was required. This technique combines the advantages of arch replacement to the simplicity of anterior hemiarch repair. This study demonstrates the safety of the procedure and the possibility to induce aortic remodeling without complex arch replacement.

The macroalgal carbonate factory at a cool-to-warm temperate marine transition, Southern Australia

NASA Astrophysics Data System (ADS)

James, Noel P.; Reid, Catherine M.; Bone, Yvonne; Levings, Andrew; Malcolm, Isabelle

2013-06-01

The shallow neritic seafloor to depths of ~ 30 m along the coast of southwestern Victoria Australia, is the site of rocky reefs on volcanic and aeolianite bathymetric highs. The region, located near the warm- to cool-temperate environmental transition, is a site of prolific macroalgae (kelp) growth. Kelps are most prolific and diverse in high-energy, open-ocean environments whereas broad-leafed seagrasses, at their cold-water eastern limit, are restricted to local protected embayments. The seagrasses are reduced to one species of Amphibolis whereas the kelps are diverse and include the large intertidal bull kelp (Durvillaea), not present in warmer waters. The macroalgal forest extends from the intertidal to ~ 30 mwd (metres water depth) as a series of distinct biomes; 1) the Peritidal, 2) the Phaeophyte Forest (0-17 mwd), 3) the Rhodophyte Thicket (17-15 mwd), and 4) the Invertebrate Coppice (> 25 mwd). The Phaeophyte Forest is partitioned into a Durvillaea zone (0-2 mwd), a Phyllospora zone (2-10 mwd) and an Ecklonia zone (10-17mwd). The two major habitats within each biome comprise 1) an upward facing illuminated surface that supports a macroalgal canopy over an understorey of coralline algae and herbivorous gastropods, and 2) a separate, cryptic, shaded habitat dominated by a diverse community of filter-feeding invertebrates. These communities produce two different sediments; 1) geniculate and encrusting corallines and diverse gastropods from the upper surface, and 2) bryozoans, molluscs, barnacles, chitons, serpulids, and benthic foraminifers from the shaded, cryptic habitats. These particles are blended together with the latter becoming proportionally more abundant with increasing depth. Results of this study, when integrated with recent investigations in warm-temperate (South Australia) and cool-temperate (New Zealand) environments now define carbonate sedimentology of the macroalgal reef depositional system in this part of the northern Southern Ocean.

Biofluorescence as a survey tool for cryptic marine species.

PubMed

De Brauwer, Maarten; Hobbs, Jean-Paul A; Ambo-Rappe, Rohani; Jompa, Jamaluddin; Harvey, Euan S; McIlwain, Jennifer L

2017-10-06

As ecosystems come under increasing anthropogenic pressure, rare species face the highest risk of extinction. Paradoxically, data necessary to evaluate the conservation status of rare species are often lacking because of the challenges of detecting species with low abundance. One group of fishes subject to this undersampling bias are those with cryptic body patterns. Twenty-one percent of cryptic fish species assessed for their extinction risk (International Union for Conservation of Nature [IUCN]) are data deficient. We developed a nondestructive method for surveying cryptically patterned marine fishes based on the presence of biofluorescence (underwater biofluorescence census, UBC). Blue LED torches were used to investigate how widespread biofluorescence was in cryptic reef fishes in the Coral Triangle region. The effectiveness of UBC to generate abundance data was tested on a data-deficient pygmy seahorse species (Hippocampus bargibanti) and compared with data obtained from standard underwater visual census (UVC) surveys. We recorded 95 reef fish species displaying biofluorescence, 73 of which had not been previously described as biofluorescent. Of those fish with cryptic patterns, 87% were biofluorescent compared with 9% for noncryptic fishes. The probability of species displaying biofluorescence was 70.9 times greater for cryptic species than for noncryptic species. Almost twice the number of H. bargibanti was counted using the UBC compared with UVC. For 2 triplefin species (Ucla xenogrammus, Enneapterygius tutuilae), the abundance detected with UBC was triple that detected with UVC. The UBC method was effective at finding cryptic species that would otherwise be difficult to detect and thus will reduce interobserver variability inherent to UVC surveys. Biofluorescence is ubiquitous in cryptic fishes, making this method applicable across a wide range of species. Data collected using UBC could be used with multiple IUCN criteria to assess the extinction risk of cryptic species. Adopting this technique will enhance researchers' ability to survey cryptic species and facilitate management and conservation of cryptic marine species. © 2017 Society for Conservation Biology.

Preferential rifting of continents - A source of displaced terranes

NASA Technical Reports Server (NTRS)

Vink, G. E.; Morgan, W. J.; Zhao, W.-L.

1984-01-01

Lithospheric rifting, while prevalent in the continents, rarely occurs in oceanic regions. To explain this preferential rifting of continents, the total strength of different lithospheres is compared by integrating the limits of lithospheric stress with depth. Comparisons of total strength indicate that continental lithosphere is weaker than oceanic lithosphere by about a factor of three. Also, a thickened crust can halve the total strength of normal continental lithosphere. Because the weakest area acts as a stress guide, any rifting close to an ocean-continent boundary would prefer a continental pathway. This results in the formation of small continental fragments or microplates that, once accreted back to a continent during subduction, are seen as displaced terranes. In addition, the large crustal thicknesses associated with suture zones would make such areas likely locations for future rifting episodes. This results in the tendency of new oceans to open along the suture where a former ocean had closed.

The record of India-Asia collision preserved in Tethyan ocean basin sediments.

NASA Astrophysics Data System (ADS)

Najman, Yani; Jenks, Dan; Godin, Laurent; Boudagher-Fadel, Marcelle; Bown, Paul; Horstwood, Matt; Garzanti, Eduardo; Bracialli, Laura; Millar, Ian

2015-04-01

The timing of India-Asia collision is critical to the understanding of crustal deformation processes, since, for example, it impacts on calculations regarding the amount of convergence that needs to be accommodated by various mechanisms. In this research we use sediments originally deposited in the Tethyan ocean basin and now preserved in the Himalayan orogeny to constrain the timing of collision. In the NW Himalaya, a number of workers have proposed a ca 55-50 Ma age for collision along the Indus suture zone which separates India from the Kohistan-Ladakh Intraoceanic Island arc (KLA) to the north. This is based on a number of factors including the age of youngest marine sediments in the Indus suture (e.g. Green et al. 2008), age of eclogites indicative of onset of Indian continental subduction (e.g. de Sigoyer et al. 2000), and first evidence of detritus from north of the suture zone deposited on the Indian plate (e.g. Clift et al. 2002). Such evidence can be interpreted as documenting the age of India-Asia collision if one takes the KLA to have collided with the Asian plate prior to its collision with India (e.g. Petterson 2010 and refs therein). However, an increasing number of workers propose that the KLA collided with Asia subsequent to its earlier collision with India, dated variously at 85 Ma (Chatterjee et al. 2013), 61 Ma (Khan et al. 2009) and 50 Ma (Bouilhol et al. 2013). This, plus the questioning of earlier provenance work (Clift et al. 2002) regarding the validity of their data for constraining timing of earliest arrival of material north of the suture deposited on the Indian plate (Henderson et al. 2011) suggests that the time is right for a reappraisal of this topic. We use a provenance-based approach here, using combined U-Pb and Hf on detrital zircons from Tethyan ocean basin sediments, along with petrography and biostratigraphy, to identify first arrival of material from north of the Indian plate to arrive on the Indian continent, to constrain the time of collision. With the recent discovery that the Indus Group sediments in the suture zone cannot be used for this purpose as previously proposed (Henderson et al. 2011) we turn to the 54 Ma Kong and Chulung La Formation youngest Tethyan sediments on the Indian margin (Garzanti et al. 1987) to investigate whether we can identify such material, and whether it be Spong arc (Fuchs and Willems 1990), KLA or Trans-Himalayan derived, thus determining what collided with India and when. References Bouilhol P, Jagoutz O, Hanchar JM, Dudas FO. 2013. Dating the India-Eurasia collision through arc magmatic records. Earth and Planetary Science Letters 366, 163-175. Chatterjee S, Goswami A, Scotese CR. 2013. The longest voyage: Tectonic, magmatic, and paleoclimatic evolution of the Indian plate during its northward flight from Gondwana to Asia. Gondwana Research 23, 238-267. Clift P, Carter A, Krol M, Kirby E. 2002. Constraints on India-Eurasia collision in the Arabian sea region taken from the Indus Group, Ladakh Himalaya, India. The tectonic and climatic evolution of the Arabian Sea region Geological Society of London Special Publication 195, 97-116. de Sigoyer J, Chavagnac V, Blichert-Toft J, Villa IM, Luais B, Guillot S, Cosca M, Mascle G. 2000. Dating the Indian continental subduction and collisional thickening in the northwest Himalaya: Multichronology of the Tso Morari eclogites. Geology 28, 487-490. Fuchs G, Willems H. 1990. The final stages of sedimentation in the Tethyan zone of Zanskar and their geodynamic significance (Ladakh - Himalaya). Jahrbuche Geologische Bundenstalt 133: 259-273. Garzanti E, Baud A, Mascle G. 1987. Sedimentary Record of the Northward Flight of India and Its Collision with Eurasia (Ladakh Himalaya, India). Geodinamica Acta 1, 297-312. Green OR, Searle MP, Corfield RI, Corfield RM. 2008. Cretaceous-tertiary carbonate platform evolution and the age of the India-Asia collision along the Ladakh Himalaya (northwest India). J Geol 116: 331-353. Henderson AL, Najman Y, Parrish R, Mark D, Foster GL. 2011. Constraints to the timing of India-Eurasia collision; a re-evaluation of evidence from the Indus Basin sedimentary rocks of the Indus-Tsangpo Suture Zone, Ladakh, India. Earth Science Reviews 106, 265-292. Khan SD, Walker DJ, Hall SA, Burke KC, Shah MT, Stockli L. 2009. Did the Kohistan-Ladakh island arc collide first with India? Geological Society of America Bulletin 121, 366-384. Petterson MG. 2010. A review of the geology and tectonics of the Kohistan island arc, north Pakistan. in The Evolving Continents: Understanding Processes of Continental Growth (eds. TM Kusky, M-G Zhai, W Xiao), pp. 287-327. Journal of the Geological society of London Special publication.

Electrical structure of the lithosphere across the Western Paraná suture zone: the role of a Neoproterozoic-Cambrian subduction in generating the Paraná Magmatic Province

NASA Astrophysics Data System (ADS)

Dragone, G. N.; Bologna, M.; Gimenez, M. E.; Alvarez, O.; Lince Klinger, F. G.; Correa-Otto, S.; Ussami, N.

2017-12-01

The Paraná Magmatic Province (PMP) together with the Etendeka Province (EP) in Africa is one of the Earth's largest igneous provinces originated prior to the Western Gondwanaland break-up and the inception of the South Atlantic Ocean in the Lower Cretaceous. Geochemical data of PMP-EP basalts collected since late 1980's indicate the origin of PMP-EP by melting of a heterogeneous and enriched subcontinental lithospheric mantle with fast rate of eruption (< 3 My). The geodynamical cause of this magmatism is still a matter of debate (deep mantle plume x plate model). New isotopic geochemical data from Re-Os systematics (Rocha-Jr et al., 2012, EPSL) of PMP basalts indicate metasomatized asthenospheric mantle component probably generated at the mantle wedge between the PMP-EP lithosphere and the subducting oceanic plate. A combined seismic velocity and density model of PMP by Chaves et al. (2016, G3) indicates high velocity and a density increase of PMP ancient lithosphere interpreted as due to a long-term mantle refertilization process. To investigate the role of the subduction zones in the development of both the Paraná basin subsidence and the magmatic province we present the results of regional scale broad-band MT-magnetotelluric soundings across the western and southern borders of the PMP, the Western Paraná suture zone (WPS in Fig. 1). We discuss the electrical properties of the lithosphere along three MT profiles across the WPS. MT-A profile (Padilha et al., 2015, JGR) extends from Rio Apa craton towards the center of PMP (high-TiO2 basalts). Profile MT-B extends from Tebicuary craton towards the center of PMP (low-TiO2) and profile MT-C extends from Rio de la Plata craton towards the southern PMP (low- and high-TiO2). All profiles show a resistive ( 104 ohm m) and thick (> 150 km) lithosphere in the cratonic areas whereas the electrical lithosphere is thinner (<100 km) with alternating high and low resistivities within PMP. Vertically elongated and high electrical conductivity anomalies ( 10 ohm m) centered at 40 km depth occur along the -30 mGal contour line in the three profiles, and are interpreted as the location of the suture and former subduction zone. We will discuss the correlation between geochemical and petrological characteristics of basalts and the electrical properties of the lithospheric mantle underneath.

The Paleotethys suture in Central Iran

NASA Astrophysics Data System (ADS)

Bagheri, S.; Stampfli, G. M.

2003-04-01

The Triassic rocks of the Nakhlak area have been used to justify the hypothesis of the rotation of the Central-East Iranian microplate, mainly based on paleomagnetic data. Davoudzadeh and his coworkers (1981) pointed out the existing contrast between the Nakhlakh succession and the time-equivalent lithostratigraphic units exposed in the surrounding regions and compared them with the Triassic rocks of the Aghdarband area on the southern edge of the Turan plate. We recently gathered evidences that this part of central Iran effectively belongs to the Northern Iranian Paleo-Tethys suture zone and related Variscan terrains of the Turan plate. This is the case for the northwestern part of central Iran, where the Anarak-Khur belt (Anarak schists and their thick Cretaceous-Paleocene sedimentary cover) presents all the elements of an orogenic zone such as dismembered ophiolites and silisiclastics, calcareous and volcanic cover which has been deformed and metamorphosed. This belt is separated to the northwest from the Alborz microcontinent by the Great Kavir fault and Cretaceous ophiolite mélanges. To the southeast it is bounded by the Biabanak fault and serpentinites and the Biabanak block, part of the central-east Iranian plate. The later zone is formed by Proterozoic metamorphic basement and marine sedimentary cover, nearly continuous from the Ordovician to the Triassic, at the uppermost part upper Triassic-lower Jurassic bauxites and silisiclastics are observed. Excepted the Ordovician angular unconformities and the boundary between lower Jurassic and younger layers, this sequence displays no significant main unconformities and can be attributed to the Cimmerian super-terrain. Thus, this sequences represents the classical evolution of the southern Paleo-Tethys passive margin, as found in the Alborz microcontinent or the Band-e Bayan zone of Afghanistan and is the witness of large scale duplication of the Paleo-Tethys suture zone through major Alpine strike-slip faults. Within the Anarak-Khur belt limit and to the northeast of the Nakhlak succession, the area of Godar-e Siah of Jandaq, remnants of the Eurasian active margin are found, represented by: 1- A lower Paleozoic to upper Devonian unit consisting mainly of metamorphosed rocks including ophiolitic rocks, pelagic sediments, flysch-like deposits and shallow-water limestones of Devonian age belonging to the Anarak and Kabudan areas. Folding and thrusting was pre-Carboniferous and all geochronological dating based on K/Ar for the Anarak and Kaboudan schists placed this metamorphic event between middle Devonian and Visean. 2- the main part of the lower Carboniferous unit consists of a volcano-sedimentary complex with intercalations of limestone containing Coral, Brachiopod and Foraminiferas. Pyroclastic deposits are followed by continental red beds containing a great variety of grain types, such as hypabyssal to several types of granitoid rock fragments derived from the arc, accompanied by pebbles of chert, fossiliferous carbonate and serpentinite recycled from the accretionary complex, pointing to a fore-arc environment of deposition. 3- The middle Carboniferous to Permian unit consists of coarse littoral conglomerate and sandstones derived from ophiolitic to felsic material with some platform limestones. They represent the final infill of the fore-arc basin and rest unconformably on both the metamorphites and Lower Carboniferous units. These tectono-stratigraphic units are similar to the western Hindu Kush sequences of Afghanistan and Tuarkyr in Turkmenistan and belong to the northern active margin of Paleo-Tethys. Therefore, the Anarak-Khur belt was part of the Variscan terranes located along this margin. Volcano-sedimentary strata with Conodont-bearing limestones of Permian to Triassic age have been found in direct contact with the Biabanak fault which, therefore, is most likely following and reactivating the Paleo-Tethys suture zone.

Pay Attention to the Overlooked Cryptic Diversity in Existing Barcoding Data: the Case of Mollusca with Character-Based DNA Barcoding.

PubMed

Zou, Shanmei; Li, Qi

2016-06-01

With the global biodiversity crisis, DNA barcoding aims for fast species identification and cryptic species diversity revelation. For more than 10 years, large amounts of DNA barcode data have been accumulating in publicly available databases, most of which were conducted by distance or tree-building methods that have often been argued, especially for cryptic species revelation. In this context, overlooked cryptic diversity may exist in the available barcoding data. The character-based DNA barcoding, however, has a good chance for detecting the overlooked cryptic diversity. In this study, marine mollusk was as the ideal case for detecting the overlooked potential cryptic species from existing cytochrome c oxidase I (COI) sequences with character-based DNA barcode. A total of 1081 COI sequences of mollusks, belonging to 176 species of 25 families of Gastropoda, Cephalopoda, and Lamellibranchia, were conducted by character analysis. As a whole, the character-based barcoding results were consistent with previous distance and tree-building analysis for species discrimination. More importantly, quite a number of species analyzed were divided into distinct clades with unique diagnostical characters. Based on the concept of cryptic species revelation of character-based barcoding, these species divided into separate taxonomic groups might be potential cryptic species. The detection of the overlooked potential cryptic diversity proves that the character-based barcoding mode possesses more advantages of revealing cryptic biodiversity. With the development of DNA barcoding, making the best use of barcoding data is worthy of our attention for species conservation.

Members of Bemisia tabaci (Hemiptera: Aleyrodidae) Cryptic Species and the Status of Two Invasive Alien Species in the Yunnan Province (China)

PubMed Central

Hu, Jian; Jiang, Zhi-Lin; Nardi, Francesco; Liu, Yuan-Yuan; Luo, Xiao-Rong; Li, Hong-Xiang; Zhang, Zhong-Kai

2014-01-01

Abstract Bemisia tabaci (Gennadius) (Hemiptera: Aleyrodidae) is a cryptic species complex that includes some of the most significant pests of agriculture and horticulture worldwide. To understand the diversity and distribution of B. tabaci cryptic species in Yunnan, a famous biodiversity hotspot in China, a large-scale sampling was conducted from year 2010 to 2013 in 10 prefectures. Mitochondrial cytochrome oxidase I gene sequences were used to identify different cryptic species. Phylogenetic analyses were performed using Bayesian methods to assess the position of a new B. tabaci cryptic species in the context of the B. tabaci diversity in Asia. The survey indicates at least eight B. tabaci cryptic species are present in Yunnan, two invasive (MEAM1 and MED) and six indigenous (China 2, China3, China 4, Asia I, Asia II 1, and Asia II 6), MEAM1, MED, and Asia I being the three predominant cryptic species in Yunnan. Compared with MEAM1, MED has a wider distribution. Based on molecular data, a new cryptic species, here named China 4, was identified that appears to be related to China 1, China 2, and China 3. Future efforts should focus on the interactions between predominant B. tabaci cryptic species and begomoviruses and on the development of effective control strategies. PMID:25502045

Members of Bemisia tabaci (Hemiptera: Aleyrodidae) cryptic species and the status of two invasive alien species in the Yunnan Province (China).

PubMed

Hu, Jian; Jiang, Zhi-Lin; Nardi, Francesco; Liu, Yuan-Yuan; Luo, Xiao-Rong; Li, Hong-Xiang; Zhang, Zhong-Kai

2014-01-01

Bemisia tabaci (Gennadius) (Hemiptera: Aleyrodidae) is a cryptic species complex that includes some of the most significant pests of agriculture and horticulture worldwide. To understand the diversity and distribution of B. tabaci cryptic species in Yunnan, a famous biodiversity hotspot in China, a large-scale sampling was conducted from year 2010 to 2013 in 10 prefectures. Mitochondrial cytochrome oxidase I gene sequences were used to identify different cryptic species. Phylogenetic analyses were performed using Bayesian methods to assess the position of a new B. tabaci cryptic species in the context of the B. tabaci diversity in Asia. The survey indicates at least eight B. tabaci cryptic species are present in Yunnan, two invasive (MEAM1 and MED) and six indigenous (China 2, China3, China 4, Asia I, Asia II 1, and Asia II 6), MEAM1, MED, and Asia I being the three predominant cryptic species in Yunnan. Compared with MEAM1, MED has a wider distribution. Based on molecular data, a new cryptic species, here named China 4, was identified that appears to be related to China 1, China 2, and China 3. Future efforts should focus on the interactions between predominant B. tabaci cryptic species and begomoviruses and on the development of effective control strategies. © The Author 2014. Published by Oxford University Press on behalf of the Entomological Society of America.

Cryptic Species Identification and Composition of Bemisia tabaci (Hemiptera: Aleyrodidae) Complex in Henan Province, China

PubMed Central

Hu, Jian; Wang, Lun-Ji; Dong, Jun-Feng; Song, Yue-Qin; Sun, Hui-Zhong

2017-01-01

Abstract Bemisia tabaci (Gennadius) (Hemiptera: Aleyrodidae) is a cryptic species complex, causing significant crop losses in China during the last decade. Although knowledge of cryptic species composition and dynamics within B. tabaci complex is critical for developing sustainable pest management strategies, limited information is available on this pest in the Henan province of China. A systematic survey of the cryptic species composition and distribution of B. tabaci complex in different locations of Henan province was conducted in 2012. The results of RAPD-PCR and the gene for the mitochondrial cytochrome oxidase subunit-1 (mtCOI) based phylogenetic relationships established using Bayesian method indicated there were four known cryptic species MEAM1, MED, Asia II 3, Asia II 9 and a new cryptic species named China 6 in Henan province. In the survey, the invasive cryptic species MED and MEAM1 were found to be predominant with wide spread distribution across the surveyed regions. On the contrary, the indigenous B. tabaci cryptic species including Asia II 3, Asia II 9 and China 6 remained with low prevalence in some surveyed regions. Cryptic species MEAM1 and MED have not completely displaced the native B. tabaci in Henan province. This current study for the first time unifies our knowledge of the diversity and distribution of B. tabaci across Henan province of China. PMID:28973577

Plate tectonics 2.5 billion years ago: evidence at kolar, South India.

PubMed

Krogstad, E J; Balakrishnan, S; Mukhopadhyay, D K; Rajamani, V; Hanson, G N

1989-03-10

The Archean Kolar Schist Belt, south India, is a suture zone where two gneiss terranes and at least two amphibolite terranes with distinct histories were accrted. Amphibolites from the eastern and western sides of the schist belt have distinct incompatible element and isotopic characteristics sugesting that their volcanic protoliths were derived from dint mantle sources. The amphibolite and gneiss terranes were juxtaposed by horizontal compression and shearing between 2530 and 2420 million years ago (Ma) along a zone marked by the Kolar Schist Belt. This history of accretion of discrete crustal terranes resembles those of Phanerozoic convergent margins and thus suggests that plate tectonics operated on Earth by 2500 Ma.

Plate tectonics 2.5 billion years ago - Evidence at Kolar, south India

NASA Technical Reports Server (NTRS)

Krogstad, E. J.; Hanson, G. N.; Balakrishnan, S.; Rajamani, V.; Mukhopadhyay, D. K.

1989-01-01

The Archean Kolar Schist Belt, south India, is a suture zone where two gneiss terranes and at least two amphibolite terranes with distinct histories were accreted. Amphibolites from the eastern and western sides of the schist belt have distinct incompatible element and isotopic characteristics suggesting that their volcanic protoliths were derived from different mantle sources. The amphibolite and gneiss terranes were juxtaposed by horizontal compression and shearing between 2530 and 2420 million years ago (Ma) along a zone marked by the Kolar Schist Belt. This history of accretion of discrete crustal terranes resembles those of Phanerozoic convergent margins and thus suggests that plate tectonics operated on earth by 2500 Ma.

Late Proterozoic transpression on the Nabitah fault system-implications for the assembly of the Arabian Shield

USGS Publications Warehouse

Quick, J.E.

1991-01-01

The longest proposed suture zone in Saudi Arabia, the Nabitah suture, can be traced as a string of ophiolite complexes for 1200 km along the north-south axis of the Arabian Shield. Results of a field study in the north-central shield between 23?? and 26??N indicate that the Nabitah suture is indeed a major crustal discontinuity across which hundreds of kilometers of displacement may have occurred on north-south trending, subvertical faults of the Nabitah fault system. Although not a unique solution, many structures within and near these faults can be reconciled with transpression, i.e., convergent strike-slip, and syntectonic emplacement of calc-alkaline plutonic rocks. Transcurrent motion on the Nabitah fault system appears to have began prior to 710 Ma, was active circa 680 Ma, and terminated prior to significant left-lateral, strike slip on the Najd fault system, which began sometime after 650 Ma. Northwest-directed subduction in the eastern shield could have produced the observed association of calc-alkaline magmatism and left-lateral transpressive strike slip, and is consistent with interpretation of the Abt schist and sedimentary rocks of the Murdama group as relics of the associated accretionary wedge and fore-arc basin. ?? 1991.

Tethys and the evolution in Afghanistan: tectonics and mineral resources

NASA Astrophysics Data System (ADS)

Okaya, N.; Onishi, C. T.; Mooney, W. D.

2009-12-01

The tectonic history and mineral resources of Afghanistan are related to the closing of the Paleo-Tethys Ocean and the opening of the Neo-Tethys Ocean. As part of this process, oceanic sediments and continental fragments were accreted onto northern Afghanistan during the Mesozoic Cimmerian orogeny. Deposits in the Paleo-Tethys Ocean iare presently represented by a thick sequence of Paleozoic sedimentary rocks within the Tajik/Turan block, part of the Eurasian continent in northern Afghanistan. The accreted micro-continents of the Cimmerian orogeny include: (1) the Farah block, (2) the Helmand block and (3) the exotic Kabul block. Later, during the Cretaceous, the East Nuristan island arc and the intra-oceanic island arc of Kohistan were sutured. Major faults in Afghanistan include: (1) the Herat fault, an E-W suture zone between the Eurasia continent and the terrains of the Cimmerian orogeny; (2) the N-S Punjao suture located between the Farah and Helmand blocks; and (3) the NE-SW oriented Chaman fault, part of a transpressional plate boundary located near the border with Pakistan. Such a complex blend of geology and tectonics gives host to abundant mineral resources. We summarize the tectonic evolution of Afghanistan in a series of lithospheric cross-sections, beginning at about 400 Ma., and identify the mineral resources in the context of the regional tectonics.

Tectonic Activity and Processes Preceding the Formation of the Dead Sea Fault Zone

NASA Astrophysics Data System (ADS)

Eppelbaum, L. V.; Pilchin, A. N.

2007-12-01

Analysis of geological-geophysical data indicates that at the end of the Proterozoic, blocks of the Arabian Shield (AS) were thrust to the north-west onto the crust of the proto-Mediterranean (PM). This was caused by the pushing of oceanic crust from the south-east forming the Najd faults system (NF). This thrusting took place between 630 and 590 Ma, and is confirmed by the offsets between the Yanbu suture of the AS and Allaqi-Sol Hamid suture of the Nubian Shield (NS), the Bi'r Umq suture of AS and Nakasib suture of NS, and parts of the Yanbu and Nabitah sutures of AS. This caused the separation of AS from NS, and AS from the continental crust to north-east of it with its north-western displacement, resulting in opening of the Persian Gulf. This caused the start of deposition of huge amounts of Vendian-Cambrian evaporites in Saudi Arabia, Oman, Persian Gulf, Zagros, central Iran and other regions. The fact of the formation and preservation of the evaporites, and the common similarities in Vendian-Triassic sedimentary cover of Central Iran, Zagros, Taurus, and Arabian Plate (AP) and common Late Proterozoic-Early Paleozioc magmatic activity, show that these regions did not change their position significantly since then. Results of the DESERT project show that the lowermost part of the crust is present east of the Dead Sea Fault Zone (DSFZ), but it is absent west of it. This could be explained by detachment of the bottom part of the crust west of DSFZ during AP thrusting onto the crust of PM. The lithospheric slice discovered by seismic data between Moho and depth of about 55 km in S. Israel could be a remnant of that crust. During the thrusting, the AP overrode the detached slice. The slice was later remelted during formation of the postorogenic magmatic rocks of 590-530 Ma widespread in Jordan. The formation of three dyke swarms in S. Israel (600-540 Ma), widespread dykes in Sinai (590-530 Ma) and AP (590-530 Ma), as well as high-T-low-P metamorphism between 600 and 530 Ma, point to a huge release of heat likely caused by friction during the thrusting. Presence of giant quantities of K-rich granites also points to reworking of continental crust in the region. Small amount of magmatic formations younger than Cambrian age west of DSFZ and significant amount of magmatic formations of this period east of DSFZ also indicate to presence of the plate beneath Israel. Offset of suture zones within AS shows that displacement was maximal for the northern blocks of AS. This is in agreement with known separation of Israel's crust into three blocks: Negev, Judea-Samaria and Galilee- Lebanon. Numerous markers of high to ultra-high pressure conditions signify to collision between the AP and the PM. These markers are: iron rich aegerine-augite and olivine-rich phenocrysts in S. Israel; peridotite xenoliths in S. Israel equilibrated at depth ~33-34 km; discovery of diamonds, micro-diamonds and indicator minerals (Cr- diopside, orange garnet, pyrope, coesite, picroilmenite, moissanite, carbonado, corundum, olivine, perovskite, aegerine, Ti-augite) in S. Israel; garnet clinopyroxenites, garnet granulites, indicator minerals, and eclogite-like rocks in Mt. Carmel area of N. Israel; iron-rich garnets in Sinai; eclogites, diamonds and indicator minerals in non-kimberlite environments in Syria; ophiolites exposed in Syria at northern extension of the DSFZ; ophiolite-like rocks in Sinai. These markers are located along or in close proximity to the DSFZ. Different isostatic conditions east of the edge of- and above- the underlying plate, along with the eventual activation of the plate caused the later formation of the DSFZ.

A reworked Lake Zone margin: Chronological and geochemical constraints from the Ordovician arc-related basement of the Hovd Zone (western Mongolia)

NASA Astrophysics Data System (ADS)

Soejono, Igor; Buriánek, David; Janoušek, Vojtěch; Svojtka, Martin; Čáp, Pavel; Erban, Vojtěch; Ganpurev, Nyamtsetseg

2017-12-01

The primary relationships and character of the boundaries between principal lithotectonic domains in the Mongolian tract of the Central Asian Orogenic Belt (CAOB) are still poorly constrained. This brings much uncertainty in understanding of the orogeny configuration and the complete accretionary history. The plutonic Khuurai Tsenkher Gol Complex and the mainly metasedimentary Bij Group represent associated medium- to high-grade basement complexes exposed in the Hovd Zone close to its boundary with the Lake Zone in western Mongolia. The Khuurai Tsenkher Gol Complex is composed of variously deformed acid to basic magmatic rocks intimately associated with the metamorphosed sedimentary and volcanic rocks of the Bij Group. Results of our field work, new U-Pb zircon ages and whole-rock geochemical data suggest an existence of two separate magmatic events within the evolution of the Khuurai Tsenkher Gol Complex. Early to Mid-Ordovician (476 ± 5 Ma and 467 ± 4 Ma protoliths) normal- to high-K calc-alkaline orthogneisses, metadiorites and metagabbros predominate over Mid-Silurian (430 ± 3 Ma) tholeiitic-mildly alkaline quartz monzodiorites. Whereas the geochemical signature of the former suite unequivocally demonstrates its magmatic-arc origin, that of the latter quartz monzodiorite suggests an intra-plate setting. As shown by Sr-Nd isotopic data, the older arc-related magmas were derived from depleted mantle and/or were generated by partial melting of juvenile metabasic crust. Detrital zircon age populations of the metasedimentary rocks together with geochemical signatures of the associated amphibolites imply that the Bij Group was a volcano-sedimentary sequence, formed probably in the associated fore-arc wedge basin. Moreover, our data argue for an identical provenance of the Altai and Hovd domains, overall westward sediment transport during the Early Palaeozoic and the east-dipping subduction polarity. The obvious similarities of the Khuurai Tsenkher Gol Complex (Hovd Zone) with the neighbouring Togtokhinshil Complex (Lake Zone) suggest that both magmatic complexes originally belonged to the same magmatic arc, related to the Palaeo-Asian subduction system. The geodynamic cause of the later, within-plate magmatic pulse is unclear, but was probably still related to the effects of retreating subduction (slab window/ocean ridge subduction or back-arc lithosphere thinning). The Khuurai Tsenkher Gol Complex was subsequently separated from the western margin of the Lake Zone and imbricated into the Hovd Zone mélange. It is proposed that the Lake/Hovd zones boundary in the study area represents a younger deformation zone rather than a true terrane boundary/suture. This could be a general feature of the suture zones within this part of the CAOB.

Targeting a Hidden Enemy: Pyriproxyfen Autodissemination Strategy for the Control of the Container Mosquito Aedes albopictus in Cryptic Habitats

PubMed Central

Suman, Devi Shankar; Wang, Yi; Unlu, Isik; Williges, Eric; Williams, Gregory M.; Gaugler, Randy

2016-01-01

Background The Asian tiger mosquito, Aedes albopictus, is a vector of dengue, Chikungunya, and Zika viruses. This mosquito inhabits a wide range of artificial water-holding containers in urban and suburban areas making it difficult to control. We tested the hypothesis that female-driven autodissemination of an insect growth regulator could penetrate cryptic oviposition habitats difficult to treat with conventional insecticidal sprays. Methodology Oviposition preferences of Ae. albopictus females for open and cryptic cups were tested in semi-field experiments. Two conventional larvicidal sprayers were tested to determine droplet penetration and larvicidal efficacy in open and cryptic habitats using Bacillus thuringiensis var. israelensis (Bti) in the field. Finally, the efficacy of pyriproxyfen autodissemination stations was assessed in cryptic and open cups in residential areas during 2013 and 2014. Principal Findings Gravid females strongly preferred cryptic (53.1±12.9 eggs/cup) over open (10.3±4.3 eggs/cup) cups for oviposition. Cryptic cups showed limited droplet penetration and produced 0.1–0.3% larval mortality with a conventional backpack and low-volume sprays of Bti. The autodissemination stations effectively contaminated these cryptic cups (59.3–84.6%) and produced 29.7–40.8% pupal mortality during 2013–2014. Significant pupal mortality was also observed in open cups. Conclusions The autodissemination station effectively exploits the oviposition behavior of wild gravid females to deliver pyriproxyfen to targeted oviposition habitats. Although the pupal mortality in cryptic cups was relatively lower than expected for the effective vector control. Autodissemination approach may be a suitable supporting tool to manage Ae. albopictus immatures in the cryptic habitats those are less accessible to conventional larvicidal sprays. PMID:28033379

Cryptic Species Identification and Composition of Bemisia tabaci (Hemiptera: Aleyrodidae) Complex in Henan Province, China.

PubMed

Jiu, Min; Hu, Jian; Wang, Lun-Ji; Dong, Jun-Feng; Song, Yue-Qin; Sun, Hui-Zhong

2017-05-01

Bemisia tabaci (Gennadius) (Hemiptera: Aleyrodidae) is a cryptic species complex, causing significant crop losses in China during the last decade. Although knowledge of cryptic species composition and dynamics within B. tabaci complex is critical for developing sustainable pest management strategies, limited information is available on this pest in the Henan province of China. A systematic survey of the cryptic species composition and distribution of B. tabaci complex in different locations of Henan province was conducted in 2012. The results of RAPD-PCR and the gene for the mitochondrial cytochrome oxidase subunit-1 (mtCOI) based phylogenetic relationships established using Bayesian method indicated there were four known cryptic species MEAM1, MED, Asia II 3, Asia II 9 and a new cryptic species named China 6 in Henan province. In the survey, the invasive cryptic species MED and MEAM1 were found to be predominant with wide spread distribution across the surveyed regions. On the contrary, the indigenous B. tabaci cryptic species including Asia II 3, Asia II 9 and China 6 remained with low prevalence in some surveyed regions. Cryptic species MEAM1 and MED have not completely displaced the native B. tabaci in Henan province. This current study for the first time unifies our knowledge of the diversity and distribution of B. tabaci across Henan province of China. © The Authors 2017. Published by Oxford University Press on behalf of Entomological Society of America.

Cryptic diversity in a fig wasp community-morphologically differentiated species are sympatric but cryptic species are parapatric.

PubMed

Darwell, C T; Cook, J M

2017-02-01

A key debate in ecology centres on the relative importance of niche and neutral processes in determining patterns of community assembly with particular focus on whether ecologically similar species with similar functional traits are able to coexist. Meanwhile, molecular studies are increasingly revealing morphologically indistinguishable cryptic species with presumably similar ecological roles. Determining the geographic distribution of such cryptic species provides opportunities to contrast predictions of niche vs. neutral models. Discovery of sympatric cryptic species increases alpha diversity and supports neutral models, while documentation of allopatric/parapatric cryptic species increases beta diversity and supports niche models. We tested these predictions using morphological and molecular data, coupled with environmental niche modelling analyses, of a fig wasp community along its 2700-km latitudinal range. Molecular methods increased previous species diversity estimates from eight to eleven species, revealing morphologically cryptic species in each of the four wasp genera studied. Congeneric species pairs that were differentiated by a key morphological functional trait (ovipositor length) coexisted sympatrically over large areas. In contrast, morphologically similar species, with similar ovipositor lengths, typically showed parapatric ranges with very little overlap. Despite parapatric ranges, environmental niche models of cryptic congeneric pairs indicate large regions of potential sympatry, suggesting that competitive processes are important in determining the distributions of ecologically similar species. Niche processes appear to structure this insect community, and cryptic diversity may typically contribute mostly to beta rather than alpha diversity. © 2016 John Wiley & Sons Ltd.

Seperating Long-term Hydrological Loading and Tectonic Deformation Observed with Multi-temporal SAR Interferometry and GPS in Qinghai-Tibetan Plateau

NASA Astrophysics Data System (ADS)

LI, G.; Lin, H.

2014-12-01

From 2000 till present, most endorheic lakes in Tibetan plateau experienced quick increasing. Several largest lakes, gathered several meters depth water during one decade. Such massive mass increasing will lead to elastic and visco-elastic deformation of the ground. Qinghai-Tibetan Plateau is one the most active tectonic places in the world; monitoring its ground deformation is essential, when loading effect is a nuisance item. Due to the sparse distribution of GPS sites and most are roving sites, it is hard to distinguish tectonic component from mass loading effect. In this research we took Selin Co Lake located at Nujiang-Bangoin suture zone and evaluated long time ground deformation at hundred kilometers scale by multi-temporal SAR interferometry and simulate the ground deformation by loading history evaluated by multi mission satellite altimetry and optical images observation. At Nujiang-Bangoin suture zone, where GPS presented the maximum ground subsidence in Qinghai-Tibetan Plateau of 3.6mm/a which was found at the shore of Selin Co Lake from 1999 to 2011, when it experienced water level increasing of 0.7m/a. A model of elastic plate lying over Newtonian viscous half-space matches well with the results of multi-temporal SAR interferometry and GPS observations. We concluded that near Selin Co Lake area, ground deformation is composed by both tectonic and hydrological loading part. As SAR image coverage is much smaller than tectonic scale, we contribute the deformation detected by InSAR to loading effect. After evaluating and removing the hydrological loading effect, we founds that Nujiang-Bangoin suture zone did not experience quick subsidence, but only limited to 0.5mm/a. Selin Co Lake's quick volume increasing caused 3mm/a subsidence rate to the nearest GPS site. The Second nearest site showed the 1.4mm/a subsidence totally, which were composed by 1.05mm/a hydrological loading effect and the rest was tectonic. We also found that Young's Modulus is the most essential parameter for loading effect simulation, and our simulation gave the similar Young's Modulus as the previous seismic tomographic INDEPTH III program did. Therefore with accurate seismic tomographic results and loading history detected by remote sensing could accurately simulate ground deformation caused by hydrological loading.

Stratigraphy and structure of eastern Syria across the Euphrates depression

NASA Astrophysics Data System (ADS)

Sawaf, Tarif; Al-Saad, Damen; Gebran, Ali; Barazangi, Muawia; Best, John A.; Chaimov, Thomas A.

1993-04-01

A N-S crustal-scale geotransect across the northern Arabian platform in eastern Syria reveals an alternating series of basement uplifts and basins separated by predominantly transpressional fault zones above an effectively uniform crust. Four major tectonic provinces are crossed along a 325 × 100 km corridor that extends from the Iraqi border in the south to the Turkish border in the north: the Rutbah uplift, the Euphrates depression, the Abd el Aziz structural zone, and the Qamichli uplift. These features are the manifestations of reactivated pre-Cenozoic structures that responded to forces acting along nearby Arabian plate boundaries, particularly Cenozoic convergence and collision along the margins of the northern Arabian platform i.e., the Bitlis suture and the East Anatolian fault in southern Turkey and the Zagros suture in Iran and Iraq. The database for this study consists of 3000 km of industry seismic reflection data, 28 exploratory wells, and geologic and Bouguer gravity maps. The deep crustal structure and, in part, the basement geometry along this transect are inferred from two-dimensional modeling of Bouguer gravity, whereas the shallow (about 8 km) structure is constrained primarily by well and seismic data. Features of the geotransect reveal: (1) A relatively uniform crustal column approximately 37 km thick with only minor crustal thinning beneath the Euphrates. Crustal thinning may be slightly more pronounced beneath the Euphrates (about 35 km) to the southeast of the transect where the Bouguer gravity anomaly is slightly higher. (2) Along the Euphrates depression, ongoing subsidence, which began during the Late Cretaceous, resulted in the deposition of at least 3 km of Late Cretaceous and Cenozoic rocks. The structural complexity of the Paleozoic and most of the Mesozoic sedimentary sections along the transect contrasts markedly with a relatively simple, flat-lying Cenozoic section along most of the transect. A notable exception is the Abd el Aziz uplift, where Cenozoic rocks are strongly deformed. (3) While Euphrates subsidence continued throughout the Cenozoic, the inversion of the E-W-trending Abd el Aziz structure into a fault-bounded tilted block began in the Miocene, perhaps as a response to the last episode of intense Miocene collision along the nearby Bitlis and Zagros suture zones.

Geothermal potential of Caledonian granites in Ireland and the Isle of Man: Implications from hydrothermal alteration

NASA Astrophysics Data System (ADS)

Fritschle, Tobias; Daly, J. Stephen; Whitehouse, Martin J.; Buhre, Stephan; McConnell, Brian; The Iretherm Team

2015-04-01

Ordovician to Devonian (Caledonian) granites are common in the Iapetus Suture Zone (ISZ) in Ireland and Britain. Some of these, e.g., the buried Kentstown and Glenamaddy granites, are situated beneath Upper Palaeozoic sedimentary basins, and hence are potential geothermal targets. Numerous granites of similar age and related origin (Fritschle et al., 2014) are exposed astride the ISZ. They are considered to be analogous to the buried ones, and their geochemical characteristics are used as a proxy for the buried granites as samples from deep drilling are naturally limited. The whole-rock geochemistry of nine granite intrusions (71 samples, including both hydrothermally altered and unaltered samples) varies significantly, but with no obvious geographical control. The granites are S- and I-Types with ASI (Aluminium Saturation Index) between 0.7 - 1.4. Average heat production rates range from 1.4 μW/m³ for the Leinster Granite to 4.9 μW/m³ for the Drogheda Granite (Fritschle et al., 2015). The heat-producing elements uranium (U), thorium (Th) and potassium (K) and calculated heat production rates generally correlate positively with niobium and rubidium concentrations. However, S-Type compared to I-Type granites show elevated abundances in rubidium (>130 ppm) and usually have a lower Th/U ratio. Altered samples tend to have a higher Th/U ratio compared to unaltered ones. Within individual plutons trends of decreasing heat production rates with increasing Th/U ratios were observed. This trend is attributed to the hydrothermal redistribution of the mobile heat-producing element uranium. This is also implied by uranium-enrichment in hydrothermally generated Ca and Si-veinlets. Metasomatic processes such as hydrothermal alteration appear capable of significantly redistributing mobile elements such as uranium. Hence, these processes may act as a major mechanism controlling the granite's heat production budget, often shaping a pluton's geothermal exploitation potential. Fritschle, T., Daly, J.S., Whitehouse, M.J., Buhre, S., McConnell, B., 2015. Geothermal potential of Caledonian granites astride the Iapetus Suture Zone in Ireland and the Isle of Man - Implications for EGS prospectivity. Proceedings World Geothermal Congress 2015, in press. Fritschle, T., Daly, J.S., Whitehouse, M.J., McConnell, B., Buhre, S., 2014. Zircon geochronology and Hf-O isotope geochemistry from granites in the Iapetus Suture Zone in Ireland and the Isle of Man. Geophysical Research Abstracts 16, EGU-2014-801.

Origin of Permian OIB-like basalts in NW Thailand and implication on the Paleotethyan Ocean

NASA Astrophysics Data System (ADS)

Wang, Yuejun; He, Huiying; Zhang, Yuzhi; Srithai, Boontarika; Feng, Qinglai; Cawood, Peter A.; Fan, Weiming

2017-03-01

The basaltic rocks in NW Thailand belong to part of giant Southeast Asian igneous zone that delineates the extension of the Paleotethyan Ocean from SW China into NW Thailand. The Chiang Mai basaltic samples from the Chiang Dao, Fang, Lamphun and Ban Sahakorn sections are divisible into two groups of high-iron basalt. Group 1 has SiO2 of 38.30-49.18 wt.%, FeOt of 13.09-25.37 wt.%, MgO of 8.38-1.60 wt.%, TiO2 of 3.92-6.30 wt.%, which is rarely observed in nature. Group 2 shows SiO2 = 44.71-49.21 wt.%, FeOt = 10.88-14.34 wt.%, MgO = 5.24-16.11 wt.%, TiO2 = 2.22-3.07 wt.% and mg# = 44-70. Olivine and pyroxene are responsible for the fractionation of the Group 2 magma whereas low oxygen fugacity during the late-stage differentiation of the Group 1 magma prolonged fractionation of ilmenite and magnetite. The onset of ilmenite and magnetite fractionations controls the distinct differentiation commencing at MgO = 7 wt.%. Both groups show similar REE and primitive mantle-normalized patterns with insignificant Eu, Nb-Ta and Zr-Hf anomalies. They have similar Nd isotopic compositions with εNd (t) values ranging from + 2.8 to + 3.7 and similar Nb/La, Nb/U, Th/La, Zr/Nb, Th/Ta, La/Yb, Nb/Th, Nb/Y and Zr/Y, resembling those of OIB-like rocks. The representative basaltic sample yields the argon plateau age of 282.3 ± 1.4 Ma, suggestive of Early Permian origin. Our data argue for Group 1 and Group 2 are coeval in the intra-oceanic seamount setting within the Paleotethyan Ocean, which at least continued till 283 Ma. These data, along with other observations, suggest that the Inthanon zone defines the main Paleotethyan suture zone, which northerly links with the Changning-Menglian suture zone in SW China.

Cryptic Species Due to Hybridization: A Combined Approach to Describe a New Species (Carex: Cyperaceae)

PubMed Central

Escudero, Marcial

2016-01-01

Disappearance of diagnostic morphological characters due to hybridization is considered to be one of the causes of the complex taxonomy of the species-rich (ca. 2000 described species) genus Carex (Cyperaceae). Carex furva s.l. belongs to section Glareosae. It is an endemic species from the high mountains of the Iberian Peninsula (Spain and Portugal). Previous studies suggested the existence of two different, cryptic taxa within C. furva s.l. Intermediate morphologies found in the southern Iberian Peninsula precluded the description of a new taxa. We aimed to determine whether C. furva s.l. should be split into two different species based on the combination of morphological and molecular data. We sampled ten populations across its full range and performed a morphological study based on measurements on herbarium specimens and silica-dried inflorescences. Both morphological and phylogenetic data support the existence of two different species within C. furva s.l. Nevertheless, intermediate morphologies and sterile specimens were found in one of the southern populations (Sierra Nevada) of C. furva s.l., suggesting the presence of hybrid populations in areas where both supposed species coexist. Hybridization between these two putative species has blurred morphological and genetic limits among them in this hybrid zone. We have proved the utility of combining molecular and morphological data to discover a new cryptic species in a scenario of hybridization. We now recognize a new species, C. lucennoiberica, endemic to the Iberian Peninsula (Sierra Nevada, Central system and Cantabrian Mountains). On the other hand, C. furva s.s. is distributed only in Sierra Nevada, where it may be threatened by hybridization with C. lucennoiberica. The restricted distribution of both species and their specific habitat requirements are the main limiting factors for their conservation. PMID:27973589

Cryptic Species Due to Hybridization: A Combined Approach to Describe a New Species (Carex: Cyperaceae).

PubMed

Maguilla, Enrique; Escudero, Marcial

2016-01-01

Disappearance of diagnostic morphological characters due to hybridization is considered to be one of the causes of the complex taxonomy of the species-rich (ca. 2000 described species) genus Carex (Cyperaceae). Carex furva s.l. belongs to section Glareosae. It is an endemic species from the high mountains of the Iberian Peninsula (Spain and Portugal). Previous studies suggested the existence of two different, cryptic taxa within C. furva s.l. Intermediate morphologies found in the southern Iberian Peninsula precluded the description of a new taxa. We aimed to determine whether C. furva s.l. should be split into two different species based on the combination of morphological and molecular data. We sampled ten populations across its full range and performed a morphological study based on measurements on herbarium specimens and silica-dried inflorescences. Both morphological and phylogenetic data support the existence of two different species within C. furva s.l. Nevertheless, intermediate morphologies and sterile specimens were found in one of the southern populations (Sierra Nevada) of C. furva s.l., suggesting the presence of hybrid populations in areas where both supposed species coexist. Hybridization between these two putative species has blurred morphological and genetic limits among them in this hybrid zone. We have proved the utility of combining molecular and morphological data to discover a new cryptic species in a scenario of hybridization. We now recognize a new species, C. lucennoiberica, endemic to the Iberian Peninsula (Sierra Nevada, Central system and Cantabrian Mountains). On the other hand, C. furva s.s. is distributed only in Sierra Nevada, where it may be threatened by hybridization with C. lucennoiberica. The restricted distribution of both species and their specific habitat requirements are the main limiting factors for their conservation.

How hidden are hidden processes? A primer on crypticity and entropy convergence

NASA Astrophysics Data System (ADS)

Mahoney, John R.; Ellison, Christopher J.; James, Ryan G.; Crutchfield, James P.

2011-09-01

We investigate a stationary process's crypticity—a measure of the difference between its hidden state information and its observed information—using the causal states of computational mechanics. Here, we motivate crypticity and cryptic order as physically meaningful quantities that monitor how hidden a hidden process is. This is done by recasting previous results on the convergence of block entropy and block-state entropy in a geometric setting, one that is more intuitive and that leads to a number of new results. For example, we connect crypticity to how an observer synchronizes to a process. We show that the block-causal-state entropy is a convex function of block length. We give a complete analysis of spin chains. We present a classification scheme that surveys stationary processes in terms of their possible cryptic and Markov orders. We illustrate related entropy convergence behaviors using a new form of foliated information diagram. Finally, along the way, we provide a variety of interpretations of crypticity and cryptic order to establish their naturalness and pervasiveness. This is also a first step in developing applications in spatially extended and network dynamical systems.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Walsh, David A.; Zaikova, Elena; Howes, Charles L.

Oxygen minimum zones (OMZs), also known as oceanic"dead zones", are widespread oceanographic features currently expanding due to global warming and coastal eutrophication. Although inhospitable to metazoan life, OMZs support a thriving but cryptic microbiota whose combined metabolic activity is intimately connected to nutrient and trace gas cycling within the global ocean. Here we report time-resolved metagenomic analyses of a ubiquitous and abundant but uncultivated OMZ microbe (SUP05) closely related to chemoautotrophic gill symbionts of deep-sea clams and mussels. The SUP05 metagenome harbors a versatile repertoire of genes mediating autotrophic carbon assimilation, sulfur-oxidation and nitrate respiration responsive to a wide rangemore » of water column redox states. Thus, SUP05 plays integral roles in shaping nutrient and energy flow within oxygen-deficient oceanic waters via carbon sequestration, sulfide detoxification and biological nitrogen loss with important implications for marine productivity and atmospheric greenhouse control.« less

Seismicity in the platform regions of Ukraine in the zones of anomalous electrical conductivity

NASA Astrophysics Data System (ADS)

Kushnir, A. N.; Kulik, S. N.; Burakhovich, T. K.

2013-05-01

It is established for the first time that there are several regions in Ukraine, in which the earthquakes occurring within platform territory are correlated to the anomalous conductive structures in the Earth's crust and upper mantle. These regions are identified as (1) Donbass and the eastern part of the Dnieper-Donetsk Depression (DDD); (2) eastern margin of the Ingulets-Krivoi Rog suture zone in the area of the Krivoi Rog-Kremenchug fault zone; (3) the western part of the Cis-Azov megablock; (4) the western boundary of the Ukrainian Shield and its slope; (5) North Dobruja and Pre-Dobrujan Depression. The reconstructed tree-dimensional (3D) geoelectrical models of the Earth's crust and upper mantle feature anomalously low values of electric resistivity. The earthquake sources in the platform areas of Ukraine are localized above the top and in the upper parts of the crustal anomalies of electrical conductivity.

Shear wave velocity structure of the Anatolian Plate and surrounding regions using Ambient Noise Tomography

NASA Astrophysics Data System (ADS)

Delph, J. R.; Beck, S. L.; Zandt, G.; Biryol, C. B.; Ward, K. M.

2013-12-01

The Anatolian Plate consists of various lithospheric terranes amalgamated during the closure of the Tethys Ocean, and is currently extruding to the west in response to a combination of the collision of the Arabian plate in the east and the roll back of the Aegean subduction zone in the west. We used Ambient Noise Tomography (ANT) at periods <= 40s to investigate the crust and uppermost mantle structure of the Anatolian Plate. We computed a total of 13,779 unique cross-correlations using one sample-per-second vertical component broadband seismic data from 215 stations from 8 different networks over a period of 7 years to compute fundamental-mode Rayleigh wave dispersion curves following the method of Benson et al. (2007). We then inverted the dispersion data to calculate phase velocity maps for 11 periods from 8 s - 40 s throughout Anatolia and the Aegean regions (Barmin et al. 2001). Using smoothed Moho values derived from Vanacore et al. (2013) in our starting models, we inverted our dispersion curves using a linear least-squares iterative inversion scheme (Herrmann & Ammon 2004) to produce a 3-D shear-wave velocity model of the crust and uppermost mantle throughout Anatolia and the Aegean. We find a good correlation between our seismic shear wave velocities and paleostructures (suture zones) and modern deformation (basin formation and fault deformation). The most prominent crustal velocity contrasts occur across intercontinental sutures zones, resulting from the juxtaposition of the compositionally different basements of the amalgamated terranes. At shallow depths, seismic velocity contrasts correspond closely with surficial features. The Thrace, Cankiri and Tuz Golu basins, and accretionary complexes related to the closure of the Neotethys are characterized by slow shear wave velocities, while the Menderes and Kirsehir Massifs, Pontides, and Istanbul Zone are characterized by fast velocities. We find that the East Anatolia Plateau has slow shear-wave velocities, as expected due to high heat flow and active volcanism. The Tuz Golu fault has a visible seismic signal down to ~15 km below sea level, and the eastern Inner-Tauride Suture corresponding to the Central Anatolian Fault Zone may extend into the mantle. The Isparta Angle separates the actively extending portion of western Anatolia from the plateau regions in the east, and the largest anomaly (slow velocities) extending into the upper mantle is observed under the western flank of the Isparta Angle, corresponding to the Fethiye-Burdur fault zone. We attribute these slow shear-wave velocities to the effects of complex deformations within the crust as a result of the interactions of the African and Anatolian Plates. In the upper mantle, slow shear-wave velocities are consistent with a slab tear along a STEP fault corresponding to the extensions of the Pliny and Strabo Transform faults, allowing asthenosphere to rise to very shallow depths. The upper mantle beneath the Taurides exhibits very slow shear-wave velocities, in agreement with possible delamination or slab-breakoff (Cosentino et al. 2012) causing rapid uplift in the last 8 million years.

Late Triassic paleomagnetic result from the Baoshan Terrane, West Yunnan of China: Implication for orientation of the East Paleotethys suture zone and timing of the Sibumasu-Indochina collision

NASA Astrophysics Data System (ADS)

Zhao, Jie; Huang, Baochun; Yan, Yonggang; Zhang, Donghai

2015-11-01

In order to better understand the paleogeographic position of the Baoshan Terrane in the northernmost part of the Sibumasu Block during formation of the Pangea supercontinent, a paleomagnetic study has been conducted on Late Triassic basaltic lavas from the southern part of the Baoshan Terrane in the West Yunnan region of Southwest China. Following detailed rock magnetic investigations and progressive thermal demagnetization, stable characteristic remanent magnetizations (ChRMs) were successfully isolated from Late Triassic Niuhetang lava flows. The ChRMs are of dual polarity and pass fold and reversal tests with magnetic carriers dominated by magnetite and subordinate oxidation-induced hematite; we thus interpret them as a primary remanence. This new paleomagnetic result indicates that the Baoshan Terrane was located at low paleolatitudes of ∼15°N in the Northern Hemisphere during Late Triassic times. Together with available paleomagnetic data from the Baoshan Terrane and surrounding areas, a wider paleomagnetic comparison supports the view that the East Paleotethys Ocean separated the Sibumasu and Indochina blocks and closed no later than Late Triassic times. We argue that the currently approximately north-to-south directed Changning-Menglian suture zone is very likely to have been oriented nearly east-to-west at the time of the Sibumasu-Indochina collision.

Geophysical Characterization of Some Terranes and the Geophysical Modeling of Candidate Suture Zones

NASA Technical Reports Server (NTRS)

Ravat, D.

1997-01-01

Indian participation in this project was terminated during the last year by a sudden withdrawal of support by the Department of Science and Technology, India, to the Indian Institute of Geomagnetism, Bombay. As a result, significant changes in the project focus had to be undertaken. Much of the work carried out at Southern Illinois University at Carbondale during the first year of the project anticipated the Indian participation and included development of computer programs to be used on gravity and magnetic data from the Indian subcontinent and preparations for fieldwork, tutorials, and workshops in India. Despite these setbacks, which were beyond our control, a number of significant tasks have been accomplished during the project period. These include: (1) Completion of digitization of the regional Bouguer gravity anomaly map of India and the regional ground total intensity magnetic anomaly map of India at an overdetermined spacing of 0.05 degrees. (2) We investigated and assessed the limitations of the Euler method using environmental examples because detailed aeromagnetic maps of parts of India were not available for interpretation by this method. (3) We also undertook an assessment of a suture zone between the Nyaza Craton (Archean) and the Mozambique Belt (Pan African) in the Kenya Rift, Africa, using gravity anomalies and the lithospheric seismological models. (4) We studied Magsat and high-altitude (approx. 4 km) aeromagnetic data over Canada.

The initial break-up of Pangæa elicited by Late Palæozoic deglaciation

PubMed Central

Yeh, Meng-Wan; Shellnutt, J. Gregory

2016-01-01

The break-up of Pangæa was principally facilitated by tensional plate stress acting on pre-existing suture zones. The rifting of Pangæa began during the Early Permian along the southern Tethys margin and produced the lenticular-shaped continent known as Cimmeria. A mantle-plume model is ascribed to explain the rift-related volcanism but the NW-SE oriented Cimmerian rifts do not correlate well with pre-existing suture zones or ‘structural heterogeneities’ but appear to have a pertinent spatial and temporal association with Late Palæozoic glacial-interglacial cycles. Mantle potential temperature estimates of Cimmerian rift-related basalts (1410 °C ± 50 °C) are similar to ambient mantle conditions rather than an active mantle-plume rift as previously suggested. Moreover, we find that the distribution of glacial deposits shows significant temporal and spatial concurrence between the glacial retreat margins and rifting sites. We conclude that the location and timing of Cimmerian rifting resulted from the exploitation of structural heterogeneities within the crust that formed due to repeated glacial-interglacial cycles during the Late Palæozoic. Such effects of continental deglaciation helped to create the lenticular shape of Cimmeria and Neotethys Ocean suggesting that, in some instances, climate change may directly influence the location of rifting. PMID:27511791

The basement of the Punta del Este Terrane (Uruguay): an African Mesoproterozoic fragment at the eastern border of the South American Río de La Plata craton

NASA Astrophysics Data System (ADS)

Basei, Miguel A. S.; Peel, Elena; Sánchez Bettucci, Leda; Preciozzi, Fernando; Nutman, Allen P.

2011-04-01

The Punta del Este Terrane (eastern Uruguay) lies in a complex Neoproterozoic (Brasiliano/Pan-African) orogenic zone considered to contain a suture between South American terranes to the west of Major Gercino-Sierra Ballena Suture Zone and eastern African affinities terranes. Zircon cores from Punta del Este Terrane basement orthogneisses have U-Pb ages of ca. 1,000 Ma, which indicate an lineage with the Namaqua Belt in Southwestern Africa. U-Pb zircon ages also provide the following information on the Punta del Este terrane: the orthogneisses containing the ca. 1,000 Ma inheritance formed at ca. 750 Ma; in contrast to the related terranes now in Africa, reworking of the Punta del Este Terrane during Brasiliano/Pan-African orogenesis was very intense, reaching granulite facies at ca. 640 Ma. The termination of the Brasiliano/Pan-African orogeny is marked by formation of acid volcanic and volcanoclastic rocks at ca. 570 Ma (Sierra de Aguirre Formation), formation of late sedimentary basins (San Carlos Formation) and then intrusion at ca. 535 Ma of post-tectonic granitoids (Santa Teresa and José Ignacio batholiths). The Punta del Este Terrane and unrelated western terranes represented by the Dom Feliciano Belt and the Río de La Plata Craton were in their present positions by ca. 535 Ma.

Neoproterozoic extension in the greater dharwar craton: A reevaluation of the "betsimisaraka suture" in madagascar

USGS Publications Warehouse

Tucker, R.D.; Roig, J.-Y.; Delor, C.; Amlin, Y.; Goncalves, P.; Rabarimanana, M.H.; Ralison, A.V.; Belcher, R.W.

2011-01-01

The Precambrian shield of Madagascar is reevaluated with recently compiled geological data and new U-Pb sensitive high-resolution ion microprobe (SHRIMP) geochronology. Two Archean domains are recognized: the eastern Antongil-Masora domain and the central Antananarivo domain, the latter with distinctive belts of metamafic gneiss and schist (Tsaratanana Complex). In the eastern domain, the period of early crust formation is extended to the Paleo-Mesoarchean (3.32-3.15 Ga) and a supracrustal sequence (Fenerivo Group), deposited at 3.18 Ga and metamorphosed at 2.55 Ga, is identified. In the central domain, a Neoarchean period of high-grade metamorphism and anatexis that affected both felsic (Betsiboka Suite) and mafic gneisses (Tsaratanana Complex) is documented. We propose, therefore, that the Antananarivo domain was amalgamated within the Greater Dharwar Craton (India + Madagascar) by a Neoarchean accretion event (2.55-2.48 Ga), involving emplacement of juvenile igneous rocks, high-grade metamorphism, and the juxtaposition of disparate belts of mafic gneiss and schist (metagreenstones). The concept of the "Betsimisaraka suture" is dispelled and the zone is redefined as a domain of Neoproterozoic metasedimentary (Manampotsy Group) and metaigneous rocks (Itsindro-Imorona Suite) formed during a period of continental extension and intrusive igneous activity between 840 and 760 Ma. Younger orogenic convergence (560-520 Ma) resulted in east-directed overthrusting throughout south Madagascar and steepening with local inversion of the domain in central Madagascar. Along part of its length, the Manampotsy Group covers the boundary between the eastern and central Archean domains and is overprinted by the Angavo-Ifanadiana high-strain zone that served as a zone of crustal weakness throughout Cretaceous to Recent times.

Hybridisation among groupers (genus Cephalopholis) at the eastern Indian Ocean suture zone: taxonomic and evolutionary implications

NASA Astrophysics Data System (ADS)

Payet, Samuel D.; Hobbs, Jean-Paul A.; DiBattista, Joseph D.; Newman, Stephen J.; Sinclair-Taylor, Tane; Berumen, Michael L.; McIlwain, Jennifer L.

2016-12-01

Hybridisation is a significant evolutionary process that until recently was considered rare in the marine environment. A suture zone in the eastern Indian Ocean is home to numerous hybridising sister species, providing an ideal opportunity to determine how hybridisation affects speciation and biodiversity in coral reef fishes. At this location, hybridisation between two grouper (Epinephelidae) species: Cephalopholis urodeta (Pacific Ocean) and C. nigripinnis (Indian Ocean) was investigated to determine the genetic basis of hybridisation and to compare the ecology and life history of hybrids and their parent species. This approach aimed to provide insights into the taxonomic and evolutionary consequences of hybridisation. Despite clear phenotypic differences, multiple molecular markers revealed hybrids, and their parent species were genetically homogenous within and (thousands of kilometres) outside of the hybrid zone. Hybrids were at least as fit as their parent species (in terms of growth, reproduction, and abundance) and were observed in a broad range of intermediate phenotypes. The two species appear to be interbreeding at Christmas Island due to inherent biological and ecological compatibilities, and the lack of genetic structure may be explained by three potential scenarios: (1) hybridisation and introgression; (2) discordance between morphology and genetics; and (3) incomplete lineage sorting. Further molecular analyses are necessary to discriminate these scenarios. Regardless of which applies, C. urodeta and C. nigripinnis are unlikely to evolve in reproductive isolation as they cohabit where they are common (Christmas Island) and will source congeneric mates where they are rare (Cocos Keeling Islands). Our results add to the growing body of evidence that hybridisation among coral reef fishes is a dynamic evolutionary factor.

Cryptic genetic diversity in the mottled rabbitfish Siganus fuscescens with mitochondrial introgression at a contact zone in the South China Sea.

PubMed

Ravago-Gotanco, Rachel; de la Cruz, Talna Lorena; Pante, Ma Josefa; Borsa, Philippe

2018-01-01

The taxonomy of the mottled rabbitfish Siganus fuscescens species complex has long been challenging. In this study, we analyzed microsatellite genotypes, mitochondrial lineages, and morphometric data from 373 S. fuscescens individuals sampled from the northern Philippines and Hong Kong (South China Sea, Philippine Sea and Sulu Sea basins), to examine putative species boundaries in samples comprising three co-occurring mitochondrial lineages previously reported to characterize S. fuscescens (Clade A and Clade B) or S. canaliculatus (Clade C). We report the existence of two cryptic species within S. fuscescens in the northeast region of the South China Sea and northern Philippine Sea, supported by genetic and morphological differences. Individual-based assignment methods recovered concordant groupings of individuals into two nuclear genotype clusters (Cluster 1, Cluster 2) with (1) limited gene flow, if any, between them (FST = 0.241; P < 0.001); (2) low frequency of later-generation hybrids; (3) significant association with mitochondrial Clade A and Clade B, respectively; and (4) subtle yet significant body shape differences as inferred from geometric morphometric analysis. The divergence between mitochondrial Clade C and the two other clades was not matched by genetic differences at microsatellite marker loci. The occurrence of discordant mitonuclear combinations (20.5% of the total number of individuals) is thought to result from mitochondrial introgression, consistent with a scenario of demographic, and presumably spatial, post-Pleistocene expansion of populations from northern regions into a secondary contact zone in the South China Sea. Mitonuclear discordance due to introgression obscures phylogenetic relationships for recently-diverged lineages, and cautions against the use of mitochondrial markers alone for species identification within the mottled rabbitfish species complex in the South China Sea region.

Detailed Crustal Geometry of the Continental Collision between India and Eurasia: Constraints from Deep Seismic Reflection Profiles across the Yarlung-Zangbo Suture, Tibet, at 88°E

NASA Astrophysics Data System (ADS)

Gao, R.; Li, W.; Guo, X.; Li, H.; Lu, Z.; He, R.; Zeng, L.; Klemperer, S. L.; Huang, X.

2016-12-01

The Tibetan plateau was created by continental collision between India and Eurasia and their ongoing convergence. The extent of subduction of Indian crust is central to our understanding the geodynamics of continental collision. However, owing to the lack of high-resolution data on the crustal-scale geometry of the Himalayan collision zone, the thickness of Indian crust subducting beneath the Yarlung-Zangbo Suture has been poorly known. Here we present two new deep seismic reflection profiles, respectively 100-km and 60-km long, across the central part of the Yarlung-Zangbo suture at c. 88°E (Figure 1). Seismic data processing used the CGG, ProMAX, and GeoEast systems. Processing included tomographic static correction, true-amplitude recovery, frequency analysis, filter-parameter tests, surface-consistent-amplitude corrections, surface-consistent deconvolution, coherent noise suppression, random noise attenuation, human-computer interactive velocity analysis, residual statics correction, Kirchhoff pre-stack time migration incorporating the rugged topography, and post-stack polynomial fitting to remove noise. Our two profiles both trace the Main Himalayan Thrust continuously from the mid-crust to deep beneath southern Tibet. Together with prominent Moho reflections at the base of the double-normal-thickness crust, the geometry of the subducting Indian crust is well defined. Both profiles image a limited extent of the Indian crust beneath southern Tibet and indicate that north-dipping Indian crust and south-dipping Lhasa crust converge beneath the Xietongmen region, above the remnant mantle suture. Figure 1. Geological map of the Xietongmen Region, south Tibet. The deep seismic reflection profile is shown as a solid red line, the location of big shots are shown as black stars.

Differences in life-histories refute ecological equivalence of cryptic species and provide clues to the origin of bathyal Halomonhystera (Nematoda).

PubMed

Van Campenhout, Jelle; Derycke, Sofie; Moens, Tom; Vanreusel, Ann

2014-01-01

The discovery of morphologically very similar but genetically distinct species complicates a proper understanding of the link between biodiversity and ecosystem functioning. Cryptic species have been frequently observed to co-occur and are thus expected to be ecological equivalent. The marine nematode Halomonhystera disjuncta contains five cryptic species (GD1-5) that co-occur in the Westerschelde estuary. In this study, we investigated the effect of three abiotic factors (salinity, temperature and sulphide) on life-history traits of three cryptic H. disjuncta species (GD1-3). Our results show that temperature had the most profound influence on all life-cycle parameters compared to a smaller effect of salinity. Life-history traits of closely related cryptic species were differentially affected by temperature, salinity and presence of sulphides which shows that cryptic H. disjuncta species are not ecologically equivalent. Our results further revealed that GD1 had the highest tolerance to a combination of sulphides, high salinities and low temperatures. The close phylogenetic position of GD1 to Halomonhystera hermesi, the dominant species in sulphidic sediments of the Håkon Mosby mud volcano (Barent Sea, 1280 m depth), indicates that both species share a recent common ancestor. Differential life-history responses to environmental changes among cryptic species may have crucial consequences for our perception on ecosystem functioning and coexistence of cryptic species.

Intimal re-layering technique for type A acute aortic dissection—reconstructing the intimal layer continuity to induce remodeling of the false channel

PubMed Central

Tucci, Enrico; Tommasino, Giulio; Guaccio, Giulia; Ricci, Carmelo; Lucatelli, Pierleone; Cini, Marco; Ceresa, Roberto; Benvenuti, Antonio; Muzzi, Luigi

2018-01-01

Background Residual false channel is common after repair of type A acute aortic dissection (TAAAD). Starting from our recent series of TAAAD patients we carried out a retrospective analysis, regarding the failure of primary exclusion at the time of the initial operation. We classified the location of the principal entry tears perfusing the residual false channel. The proposed technique represents our attempt to correct the mechanism of false channel perfusion during primary repair. We describe a new technique designed to address some limitations of standard hemiarch aortic replacement. Its goal are: (I) to reinforce the intimal layer at the arch level; (II) to eliminate inter-luminal communications at the arch level using suture lines around the arch vessels; (III) to provide an elephant trunk configuration for further interventions. Methods Between August 2016 and January 2018, 11 patients underwent emergency surgery using this technique; 7 were men; the median age was 74 years. All patients were treated using systemic circulatory arrest under moderate hypothermia (26 °C) and selective cerebral perfusion. All patients had supra-coronary repair; 1 patient had aortic valve replacement + CABG. In the first two patients a manual suture around supra-aortic trunks was used; the subsequent seven patients were treated with a mechanical suture bladeless device. CT scan follow up was performed in all survivors with controls before discharge 3 months and 1 year after operation. Results No patient died in the operating room and no neurologic deficit was observed in this initial experience. One patient died in POD 5th for low cardiac output syndrome. Median ICU stay was 3 days (IQR, 2–6 days). Hospital mean length of stay was 15.2±8 days. Median cardiopulmonary bypass time was 130 min (IQR, 110–141 min); median arrest time for re-layering was 17 min (IQR, 16–20 min); median total arrest was 36 min (IQR, 29–39 min). Distal aortic anastomosis was performed in zone 0 in 4 patients, zone 1, with innominate replacement, in 5 patients, in zone 2, with branches to innominate and left common carotid arteries, in 2 patients. Median follow up (closing date 06/01/2018) was 443 days (IQR, 262–557 days); no late deaths occurred. No dehiscence at the level of stapler or manual sutures was observed. Proximal 1/3 of the thoracic aorta false channel was obliterated in all cases but one; in 3 cases complete exclusion of the false channel was obtained after operation. In one case stent graft completion was required. Conclusions This technique combines the advantages of arch replacement to the simplicity of anterior hemiarch repair. This study demonstrates the safety of the procedure and the possibility to induce aortic remodeling without complex arch replacement. PMID:29780728

Tectonic significance of Kibaran structures in Central and Eastern Africa

NASA Astrophysics Data System (ADS)

Rumvegeri, B. T.

Tectonical movements of the Kibaran belt (1400-950 Ma) can be subdivided into two major deformation events, corresponding to tight, upright or recumbent folds, thrust faults, nappes and stretching lineation with a general plunging southwards. At the regional scale, the stretching lineation, associated with thrust faults and nappes is interpreted as an indication of a northwards moving direction. The shear zone with mafic-ultramafic rocks across Burundi, MW-Tanzania, SW-Uganda and NE-Zaïre is the suture zone of the Kibaran belt. Kibaran metamorphism is plurifacial and has four epizodes. The second, syn-D2, is the most important and constitutes the climax; it reached the granulite facies. The succession of tectonic, metamorphic and magmatic features suggests geotectonic evolution by subduction-collision.

Westernmost Tian Shan (Uzbekistan): Magmatism and Exhumation

NASA Astrophysics Data System (ADS)

Abdulhameed, Sanaa; Ratchbacher, Lothar; Gagala, Lukasz; Jonkheere, Raymond

2014-05-01

The westernmost segment of the Tian Shan comprises the Ghissar-Alai Range of Tajikistan and Uzbekistan; its southwestern promontory contains the Baysunta crystalline massif. This orocline extends northwest of the Pamir and southeast of the Turan platform and forms the (north) western margin of the intra-orogenic Afghan-Tajik basin that was inverted during the India-Asia collision, mainly as a result of the gravitational collapse of the Pamir Plateau. The area contains Paleozoic slope and shelf clastics mantling crystalline basement rocks, altogether intruded by massif granitoids; it hides the cryptic Late Paleozoic South Ghissar suture. In Uzbekistan, the crystalline basement rocks of the westernmost Tien Shan are involved in the folding and thrusting of the Jurassic to Neogene sediments of the Afghan-Tajik basin, spectacularly proving thick-skinned deformation and demonstrating basement involvement below the Jurassic evaporate décollement underneath the Afghan-Tajik basin. We sampled the crystalline basement rocks of the Tian Shan of Uzbekistan to constrain the formation of the enigmatic Baysunta block and date the crystallization and high-grade metamorphism of the granitoids and associated metamorphic rocks of the Ghissar range; we employed U-Pb zircon geochronology. To time the deformation and exhumation of the fold-and thrust belt of the westernmost Afghan-Tajik basin, we used apatite fission-track thermochronology. Concordant U-Pb crystallization ages of zircons in the orthogneiss and paragneiss comprise 620 to 300 Ma; the Neoproterozoic ages imply a correlation of the Baysunta block with the Garm crystalline massif of the central Ghissar-Alai range of northeastern Tajikistan. The youngest zircon crystallization ages from granitoids are ~220 Ma, revealing enigmatically young magmatism, post-dating the last known collision event by >50 Ma. Together with 270-240 Ma meta-basaltic dykes and stocks in Tajikistan, they may trace a regional post-orogenic delamination event. The apatite fission-track thermochronology suggests a two-phase exhumation history. Exhumation/cooling within the age range of ~17 and 4 Ma and clustering around 10 Ma date slip along the thick-skinned thrusts. This demonstrates the impact of the India-Asia collision on the edge of the Turan platform, far northwest of the western edge of the collision zone. Ages from the northwestern edge of the study area cover 197 to 69 Ma; they trace a fossil partial annealing zone. They show that the Tian Shan along the margin of the Turan platform was never covered by sedimentary rocks >3 km thick.

What can blueschists tell about the Deep? High Pressure in the Anatolide - Taurid Belt

NASA Astrophysics Data System (ADS)

Oberhaensli, R.

2011-12-01

High-pressure metamorphic terranes in the Anatolide - Taurid belt document the complex distribution of paleo-sutures in the Tethyan realm. Field based petrologic studies of metapelites in the Anatolide-Taurid realm allow to trace HP-LT metamorphism not only in the well known ophiolitic Tavsanli Zone (2.4 GPa/500 °C) but also in the Afyon Zone (0.9 GPa/350 °C), the Menderes Massif (1.2 Gpa/500 °C;) and in the Lycian Nappes (1.0 Gpa/400 °C) - all situated north of the so called Taurid Platform. While the HP metamorphism is dated to 90-80 Ma (Rb/Sr; Ar/Ar) in the Tavsanli Zone, it ranges from 60-70 Ma (Ar/Ar) in the Afyon Zone and its tectonic equivalent, the Lycian Nappes. The Afyon Zone s.l. is closely related to the glaucophane- lawsonite-bearing rocks of the Tavsanli Zone and its eastward extension. Blueschist-facies metamorphism is documented by Fe,Mg-carpholite in regionally distributed metapelites and glaucophane in sparse mafic rocks (Afyon, Menderes, Lycia). Since observations of HP are based on Fe,Mg-carpholite bearing metasediments and not on mafic blueschists new thermodynamic data and petrologic modelling was elaborated to match P-T data and field-based observations. Moreover, newly formed phengitic mica allows precise dating. Both, Tavsanli and Afyon Zones can be followed along strike over more than 600 km and around the southern edge of the Central Anatolian Crystalline Complex. The two zones are situated north of the Taurid Platform and correlate with the Amasia Zone in Armenia. To the extreme East the Bitlis Complex underwent a LT - HP metamorphic blueschist evolution (1,1 GPa/ 350 °C; glaucophane, Fe,Mg-carpholite) in its sedimentary cover while the basement is eclogitic. Depending on the structural position and mineral association of phengitic mica metamorphic ages of the Bitlis blueschists scatter around 70-80 Ma. Eclogites from the basement are slightly older. These LT-HP units cannot be correlated with the Tavsanli - Afyon blueschist belts since they occur south of the Taurid Platform. Thus the Bitlis Complex represents a terrane detached from the Arabian Platform that subsequently collided with the Taurus Platform during closure of the Neo-Tethys. In SW Anatolia, south of the Taurus Platform, the Alanya Zone documents a Late Cretaceous HP evolution with blueschists and eclogites. Together with the Bitlis Complex the two Late Cretaceous HP-LT regions represent a suture south of the Taurid Platform but still north of the Hatay - Güleyman - Zagros ophiolites separating the Arabian Platform from the Anatolide-Taurid realm. The dissection of the Anatolide-Taurid realm into several paleo-subduction zones of Late Cretaceous age impacts on the lithospheric structure and has consequences for the Tertiary plateau formation in Central and Eastern Anatolia. Geophysical data and observations from the East Anatolian Plateau can be explained with petrologic modelling when hydration of the lithospheric lids above subduction zones is considered.

Understanding Cryptic Pocket Formation in Protein Targets by Enhanced Sampling Simulations.

PubMed

Oleinikovas, Vladimiras; Saladino, Giorgio; Cossins, Benjamin P; Gervasio, Francesco L

2016-11-02

Cryptic pockets, that is, sites on protein targets that only become apparent when drugs bind, provide a promising alternative to classical binding sites for drug development. Here, we investigate the nature and dynamical properties of cryptic sites in four pharmacologically relevant targets, while comparing the efficacy of various simulation-based approaches in discovering them. We find that the studied cryptic sites do not correspond to local minima in the computed conformational free energy landscape of the unliganded proteins. They thus promptly close in all of the molecular dynamics simulations performed, irrespective of the force-field used. Temperature-based enhanced sampling approaches, such as Parallel Tempering, do not improve the situation, as the entropic term does not help in the opening of the sites. The use of fragment probes helps, as in long simulations occasionally it leads to the opening and binding to the cryptic sites. Our observed mechanism of cryptic site formation is suggestive of an interplay between two classical mechanisms: induced-fit and conformational selection. Employing this insight, we developed a novel Hamiltonian Replica Exchange-based method "SWISH" (Sampling Water Interfaces through Scaled Hamiltonians), which combined with probes resulted in a promising general approach for cryptic site discovery. We also addressed the issue of "false-positives" and propose a simple approach to distinguish them from druggable cryptic pockets. Our simulations, whose cumulative sampling time was more than 200 μs, help in clarifying the molecular mechanism of pocket formation, providing a solid basis for the choice of an efficient computational method.

Population genomics of parallel hybrid zones in the mimetic butterflies, H. melpomene and H. erato

PubMed Central

Ruiz, Mayté; Salazar, Patricio; Counterman, Brian; Medina, Jose Alejandro; Ortiz-Zuazaga, Humberto; Morrison, Anna; Papa, Riccardo

2014-01-01

Hybrid zones can be valuable tools for studying evolution and identifying genomic regions responsible for adaptive divergence and underlying phenotypic variation. Hybrid zones between subspecies of Heliconius butterflies can be very narrow and are maintained by strong selection acting on color pattern. The comimetic species, H. erato and H. melpomene, have parallel hybrid zones in which both species undergo a change from one color pattern form to another. We use restriction-associated DNA sequencing to obtain several thousand genome-wide sequence markers and use these to analyze patterns of population divergence across two pairs of parallel hybrid zones in Peru and Ecuador. We compare two approaches for analysis of this type of data—alignment to a reference genome and de novo assembly—and find that alignment gives the best results for species both closely (H. melpomene) and distantly (H. erato, ∼15% divergent) related to the reference sequence. Our results confirm that the color pattern controlling loci account for the majority of divergent regions across the genome, but we also detect other divergent regions apparently unlinked to color pattern differences. We also use association mapping to identify previously unmapped color pattern loci, in particular the Ro locus. Finally, we identify a new cryptic population of H. timareta in Ecuador, which occurs at relatively low altitude and is mimetic with H. melpomene malleti. PMID:24823669

Tectonic evolution and crustal-scale structure of Kyrgyz Central Asian Orogenic Belt: new insights from the Darius programme

NASA Astrophysics Data System (ADS)

Rolland, Yann; Loury, Chloé; Guillot, Stéphane; Mikolaichuk, Alexander

2014-05-01

Mechanisms and history of the Late Palaeozoic accretion followed by formation of trunscurrent strike-slip faults were studied in the southern segment of the Central Asian Orogenic Belt (CAOB) within Kyrgyz South Tianshan. 1. South Tianshan Suture: ending accretion process after docking of Tarim craton This study gives insights into the crustal-scale structure and Upper Paleozoic history of this mountain belt, currently intensely reactivated by the India-Asia collision. Structural, petrological and geochronological studies were carried out within South Tianshan suture east of the Talas-Ferghana Fault (TFF). New data highlight a south-dipping structure featured by a HP metamorphic core complex comprised of c. 320 Ma continental and oceanic eclogites exhumed by top-to-North motion. A large massif (10 x 50 km) of continental HP rocks in the Atbashi Range is comprised of hectometric boudins of eclogites embedded in metapelites and gneissesMetamorphic units exhibit blueschist to eclogite facies conditions, with oceanic (MORB) rocks in the blueschist facies representing the accretionary oceanic prism being thrusted by oceanic rocks and a continental unit in the eclogite facies (510 ± 50°C and 24 ± 2 kbar). Evidence for eclogite facies both in metasediments and mafic lithologies and geological structure are in agreement with a previously thinned continental margin. Subduction of this thinned COT (Continent-Ocean Transition) probably occurred by slab pull in a south-dipping subduction zone, while another north-dipping subduction was active below Middle Tianshan. Final stacking of Middle and South Tianshan occurred at 320-310 Ma. These opposite subduction zones are still reflected in the main structures of Tianshan. Reactivation of the South-dipping structures since 30-25 Ma is ascribed to explain the current Tianshan intra-continental subduction from seismology. 2. Talas-Ferghana Fault (TFF) activity & Basin formation After this accretionary episode, the South Tianshan suture was cross-cut by the TFF, which was active in several stages from 320 Ma to present. The main events of basin formation are ascribed to the activity of the dextral TFF (Rolland et al. 2013, JAES). Ar-Ar dating undertaken on syn-kinematic minerals that feature the phases of motion of the TFF show a first stage of activation occurred at 312 ± 4 Ma, followed by a main stage of dextral motion in the Late Permian at 256 - 250 Ma, while late stages of reactivation of TFF is featured by emplacement of 195 ± 3 Ma pegmatitic dykes, formation of transtensional basins during Jurassic, dextral offsets of river valleys and ongoing seismicity. 3. Reactivation of South Tian Shan Suture Most prominent topography in Central Asia corresponds to the former South Tianshan suture which has been reactivated since about 30 Ma, the former Carboniferous thrusts are reactivated in a pop-up structure with top-north and top-south faults bounding the high mountains of Khan Tengri and Pobeda peaks (7440 m a.s.l.).

Aerial ULV control of Aedes aegypti with naled (Dibrom) inside simulated rural village and urban cryptic habitats.

PubMed

Britch, Seth C; Linthicum, Kenneth J; Aldridge, Robert L; Breidenbaugh, Mark S; Latham, Mark D; Connelly, Peter H; Rush, Mattie J E; Remmers, Jennifer L; Kerce, Jerry D; Silcox, Charles A

2018-01-01

We conducted aerial fixed wing ultra low volume (ULV) spray trials with naled to investigate penetration of exposed and simulated cryptic habitat within opened buildings, partially sealed buildings, and outdoor locations targeting sentinel adult Aedes aegypti mosquitoes in north central Florida. Mortality was observed in open and closed buildings and outdoors, even in mosquitoes placed in cryptic habitats. Observations on the impact of building type, mosquito exposure method such as placement in cryptic habitat, and spray nozzle size on mosquito mortality are described and analyzed.

New putative cryptic species detection and genetic network analysis of Bemisia tabaci (Hempitera: Aleyrodidae) in China based on mitochondrial COI sequences.

PubMed

Hu, Jian; Zhang, Xiaoyun; Jiang, Zhilin; Zhang, Feifei; Liu, Yuanyuan; Li, Zhan; Zhang, Zhongkai

2018-04-01

The whitefly Bemisia tabaci (Gennadius) (Hemiptera: Aleyrodidae) is a cryptic species complex and widely distributed throughout tropical and subtropical regions. To understand the B. tabaci cryptic species diversity in China more comprehensively, in the year 2014 and 2016, a large-scale sampling was conducted from the famous biodiversity hotspot of China, Yunnan province. Mitochondrial cytochrome oxidase I gene sequences were used to identify new putative cryptic species. Phylogenetic analyses were performed using Bayesian methods to evaluate the position of new cryptic species in the context of the B. tabaci diversity in Asia. Two new cryptic species, China 5 and Asia V were identified. In total, 19 B. tabaci cryptic species are present in China, two invasive (MED and MEAM1) and 17 indigenous. A new sibling species of B. tabaci was first defined and reported. Based on the mtCOI sequences and haplotype network analyses, the genetic diversity of MED was far higher than MEAM1. We confirmed the exotic MED was originated from the western Mediterranean regions and first invaded into Yunnan, China. The genetic structures of other four indigenous species (Asia I, Asia II 1, Asia II 6, and China 1) with relatively wide distribution ranges in China were also discussed.

Volatile compounds in cryptic species of the Aneura pinguis complex and Aneura maxima (Marchantiophyta, Metzgeriidae).

PubMed

Wawrzyniak, Rafał; Wasiak, Wiesław; Bączkiewicz, Alina; Buczkowska, Katarzyna

2014-09-01

Aneura pinguis is one of the liverwort species complexes that consist of several cryptic species. Ten samples collected from different regions in Poland are in the focus of our research. Eight of the A. pinguis complex belonging to four cryptic species (A, B, C, E) and two samples of closely related species Aneura maxima were tested for the composition of volatile compounds. The HS-SPME technique coupled to GC/FID and GC/MS analysis has been applied. The fiber coated with DVB/CAR/PDMS has been used. The results of the present study, revealed the qualitative and quantitative differences in the composition of the volatile compounds between the studied species. Mainly they are from the group of sesquiterpenoids, oxygenated sesquiterpenoids and aliphatic hydrocarbons. The statistical methods (CA and PCA) showed that detected volatile compounds allow to distinguish cryptic species of A. pinguis. All examined cryptic species of the A. pinguis complex differ from A. maxima. Species A and E of A. pinguis, in CA and PCA, form separate clusters remote from two remaining cryptic species of A. pinguis (B and C) and A. maxima. Relationship between the cryptic species appeared from the chemical studies are in accordance with that revealed on the basis of DNA sequences. Copyright © 2014 Elsevier Ltd. All rights reserved.

Proximity of arthroscopic ankle stabilization procedures to surrounding structures: an anatomic study.

PubMed

Drakos, Mark; Behrens, Steve B; Mulcahey, Mary K; Paller, David; Hoffman, Eve; DiGiovanni, Christopher W

2013-06-01

To examine the anatomy of the lateral ankle after arthroscopic repair of the lateral ligament complex (anterior talofibular ligament [ATFL] and calcaneofibular ligament [CFL]) with regard to structures at risk. Ten lower extremity cadaveric specimens were obtained and were screened for gross anatomic defects and pre-existing ankle laxity. The ATFL and CFL were sectioned from the fibula by an open technique. Standard anterolateral and anteromedial arthroscopy portals were made. An additional portal was created 2 cm distal to the anterolateral portal. The articular surface of the fibula was identified, and the ATFL and CFL were freed from the superficial and deeper tissues. Suture anchors were placed in the fibula at the ATFL and CFL origins and were used to repair the origin of the lateral collateral structures. The distance from the suture knot to several local anatomic structures was measured. Measurements were taken by 2 separate observers, and the results were averaged. Several anatomic structures lie in close proximity to the ATFL and CFL sutures. The ATFL sutures entrapped 9 of 55 structures, and no anatomic structures were inadvertently entrapped by the CFL sutures. The proximity of the peroneus tertius and the extensor tendons to the ATFL makes them at highest risk of entrapment, but the proximity of the intermediate branch of the superficial peroneal nerve (when present) is a risk with significant morbidity. Our results indicate that the peroneus tertius and extensor tendons have the highest risk for entrapment and show the smallest mean distances from the anchor knot to the identified structure. Careful attention to these structures, as well as the superficial peroneal nerve, is mandatory to prevent entrapment of tendons and nerves when one is attempting arthroscopic lateral ankle ligament reconstruction. Defining the anatomic location and proximity of the intervening structures adjacent to the lateral ligament complex of the ankle may help clarify the anatomic safe zone through which arthroscopic repair of the lateral ligament complex can be safely performed. Copyright © 2013 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.

Assembly of the Lhasa and Qiangtang terranes in central Tibet by divergent double subduction

NASA Astrophysics Data System (ADS)

Zhu, Di-Cheng; Li, Shi-Min; Cawood, Peter A.; Wang, Qing; Zhao, Zhi-Dan; Liu, Sheng-Ao; Wang, Li-Quan

2016-02-01

Integration of lithostratigraphic, magmatic, and metamorphic data from the Lhasa-Qiangtang collision zone in central Tibet (including the Bangong suture zone and adjacent regions of the Lhasa and Qiangtang terranes) indicates assembly through divergent double sided subduction. This collision zone is characterized by the absence of Early Cretaceous high-grade metamorphic rocks and the presence of extensive magmatism with enhanced mantle contributions at ca. 120-110 Ma. Two Jurassic-Cretaceous magmatic arcs are identified from the Caima-Duobuza-Rongma-Kangqiong-Amdo magmatic belt in the western Qiangtang Terrane and from the Along Tso-Yanhu-Daguo-Baingoin-Daru Tso magmatic belt in the northern Lhasa Terrane. These two magmatic arcs reflect northward and southward subduction of the Bangong Ocean lithosphere, respectively. Available multidisciplinary data reconcile that the Bangong Ocean may have closed during the Late Jurassic-Early Cretaceous (most likely ca. 140-130 Ma) through arc-arc "soft" collision rather than continent-continent "hard" collision. Subduction zone retreat associated with convergence beneath the Lhasa Terrane may have driven its rifting and separation from the northern margin of Gondwana leading to its accretion within Asia.

Timing of terrane accretion in eastern and east-central Maine

NASA Astrophysics Data System (ADS)

Ludman, Allan

1986-05-01

The Norumbega fault zone is often cited as a post-Acadian suture between exotic blocks, even though stratigraphic, structural, and metamorphic data indicate that there is little offset of the Silurian-Devonian strata that the zone cuts in eastern Maine. Similarly, the Kingman fault zone has been shown by gravity and geochemical studies to separate distinct crustal blocks, whereas mapping shows that it lies entirely within a Silurian turbidite package. These conflicts are resolved if the two fault zones represent boundaries between Ordovician or older crustal blocks that had accreted to form a composite terrane prior to deposition of the cover sequences. The faults now mapped within these younger rocks formed by reactivation of the pre-Silurian boundaries during late Acadian time; movement continued until the late Carboniferous. Most of the accretionary history of Maine had thus ended before the Silurian. A complex composite terrane may have formed during Cambrian-Ordovician time that (1) interacted with cratonic North America during the Taconian orogeny and (2) became the “basement” upon which the Silurian and Lower Devonian strata of eastern Maine were deposited.

Feasibility of pure EFTR using an innovative new endoscopic suturing device: the Double-arm-bar Suturing System (with video).

PubMed

Mori, Hirohito; Kobara, Hideki; Fujihara, Shintaro; Nishiyama, Noriko; Rafiq, Kazi; Oryu, Makoto; Fujiwara, Masao; Suzuki, Yasuyuki; Masaki, Tsutomu

2014-02-01

Endoscopic full-thickness resection (EFTR) requires a reliable full-thickness suturing device and an endoscopic counter-traction device to prevent the collapse of the digestive tract. The present study aimed to assess the reliability of newly developed flexible endoscopy suturing devices and the feasibility of pure EFTR. A total of 30 EFTRs were performed and allocated to three groups (N = 10 for each group). The full-thickness sutures were placed using over-the-scope clips (OTSCs), hand-sewn sutures, or the Double-arm-bar Suturing System (DBSS). Air leak tests were conducted in the three groups. The times required for the placement of one OTSC suture and single-stitch simple interrupted sutures (hand-sewn and DBSS sutures, respectively) were also compared. All 30 full-thickness sutures were completely and successfully placed. Regarding the air leak tests, the Mann-Whitney U test showed significant differences between OTSC and hand-sewn sutures (p = 0.003). There was also a significant difference between OTSC and DBSS sutures (p = 0.023). There was no significant difference between hand-sewn and DBSS sutures (p = 0.542). A significant difference was found in the suture time for single-stitch simple interrupted sutures among the OTSC, hand-sewn, and DBSS sutures. The Mann-Whitney U test revealed a significant difference between OTSC and hand-sewn sutures (p = 0.0001). There was no significant difference between OTSC and DBSS sutures (p = 0.533), while a significant difference was found between hand-sewn and DBSS sutures (p = 0.0001). Pure EFTR is feasible if the mechanical counter traction system is used to expand a small operative field and DBSS is used to make full-thickness sutures. The high safety of full-thickness resection and full-thickness suturing allows for clinical applications of this method.

Cryptic species diversity reveals biogeographic support for the ‘mountain passes are higher in the tropics’ hypothesis

PubMed Central

Gill, B. A.; Kondratieff, B. C.; Casner, K. L.; Encalada, A. C.; Flecker, A. S.; Gannon, D. G.; Ghalambor, C. K.; Guayasamin, J. M.; Poff, N. L.; Simmons, M. P.; Thomas, S. A.; Zamudio, K. R.; Funk, W. C.

2016-01-01

The ‘mountain passes are higher in the tropics’ (MPHT) hypothesis posits that reduced climate variability at low latitudes should select for narrower thermal tolerances, lower dispersal and smaller elevational ranges compared with higher latitudes. These latitudinal differences could increase species richness at low latitudes, but that increase may be largely cryptic, because physiological and dispersal traits isolating populations might not correspond to morphological differences. Yet previous tests of the MPHT hypothesis have not addressed cryptic diversity. We use integrative taxonomy, combining morphology (6136 specimens) and DNA barcoding (1832 specimens) to compare the species richness, cryptic diversity and elevational ranges of mayflies (Ephemeroptera) in the Rocky Mountains (Colorado; approx. 40°N) and the Andes (Ecuador; approx. 0°). We find higher species richness and smaller elevational ranges in Ecuador than Colorado, but only after quantifying and accounting for cryptic diversity. The opposite pattern is found when comparing diversity based on morphology alone, underscoring the importance of uncovering cryptic species to understand global biodiversity patterns. PMID:27306051

In the shadows: Phylogenomics and coalescent species delimitation unveil cryptic diversity in a Cerrado endemic lizard (Squamata: Tropidurus).

PubMed

Domingos, Fabricius M C B; Colli, Guarino R; Lemmon, Alan; Lemmon, Emily Moriarty; Beheregaray, Luciano B

2017-02-01

The recognition of cryptic diversity within geographically widespread species is gradually becoming a trend in the highly speciose Neotropical biomes. The statistical methods to recognise such cryptic lineages are rapidly advancing, but have rarely been applied to genomic-scale datasets. Herein, we used phylogenomic data to investigate phylogenetic history and cryptic diversity within Tropidurus itambere, a lizard endemic to the Cerrado biodiversity hotspot. We applied a series of phylogenetic methods to reconstruct evolutionary relationships and a coalescent Bayesian species delimitation approach (BPP) to clarify species limits. The BPP results suggest that the widespread nominal taxon comprises a complex of 5 highly supported and geographically structured cryptic species. We highlight and discuss the different topological patterns recovered by concatenated and coalescent species tree methods for these closely related lineages. Finally, we suggest that the existence of cryptic lineages in the Cerrado is much more common than traditionally thought, highlighting the value of using NGS data and coalescent techniques to investigate patterns of species diversity. Copyright © 2016 Elsevier Inc. All rights reserved.

Integrating molecular and morphological approaches for characterizing parasite cryptic species: implications for parasitology.

PubMed

Nadler, Steven A; DE León, Gerardo Pérez-Ponce

2011-11-01

Herein we review theoretical and methodological considerations important for finding and delimiting cryptic species of parasites (species that are difficult to recognize using traditional systematic methods). Applications of molecular data in empirical investigations of cryptic species are discussed from an historical perspective, and we evaluate advantages and disadvantages of approaches that have been used to date. Developments concerning the theory and practice of species delimitation are emphasized because theory is critical to interpretation of data. The advantages and disadvantages of different molecular methodologies, including the number and kind of loci, are discussed relative to tree-based approaches for detecting and delimiting cryptic species. We conclude by discussing some implications that cryptic species have for research programmes in parasitology, emphasizing that careful attention to the theory and operational practices involved in finding, delimiting, and describing new species (including cryptic species) is essential, not only for fully characterizing parasite biodiversity and broader aspects of comparative biology such as systematics, evolution, ecology and biogeography, but to applied research efforts that strive to improve development and understanding of epidemiology, diagnostics, control and potential eradication of parasitic diseases.

Implications of estimated magmatic additions and recycling losses at the subduction zones of accretionary (non-collisional) and collisional (suturing) orogens

USGS Publications Warehouse

Scholl, D. W.; von Huene, Roland E.

2009-01-01

Arc magmatism at subduction zones (SZs) most voluminously supplies juvenile igneous material to build rafts of continental and intra-oceanic or island arc (CIA) crust. Return or recycling of accumulated CIA material to the mantle is also most vigorous at SZs. Recycling is effected by the processes of sediment subduction, subduction erosion, and detachment and sinking of deeply underthrust sectors of CIA crust. Long-term (>10-20 Ma) rates of additions and losses can be estimated from observational data gathered where oceanic crust underruns modern, long-running (Cenozoic to mid-Mesozoic) ocean-margin subduction zones (OMSZs, e.g. Aleutian and South America SZs). Long-term rates can also be observationally assessed at Mesozoic and older crust-suturing subduction zone (CSSZs) where thick bodies of CIA crust collided in tectonic contact (e.g. Wopmay and Appalachian orogens, India and SE Asia). At modern OMSZs arc magmatic additions at intra-oceanic arcs and at continental margins are globally estimated at c. 1.5 AU and c. 1.0 AU, respectively (1 AU, or Armstrong Unit,= 1 km3 a-1 of solid material). During collisional suturing at fossil CSSZs, global arc magmatic addition is estimated at 0.2 AU. This assessment presumes that in the past the global length of crustal collision zones averaged c. 6000 km, which is one-half that under way since the early Tertiary. The average long-term rate of arc magmatic additions extracted from modern OMSZs and older CSSZs is thus evaluated at 2.7 AU. Crustal recycling at Mesozoic and younger OMSZs is assessed at c. 60 km3 Ma-1 km-1 (c. 60% by subduction erosion). The corresponding global recycling rate is c. 2.5 AU. At CSSZs of Mesozoic, Palaeozoic and Proterozoic age, the combined upper and lower plate losses of CIA crust via subduction erosion, sediment subduction, and lower plate crustal detachment and sinking are assessed far less securely at c. 115 km3 Ma-1 km-1. At a global length of 6000 km, recycling at CSSZs is accordingly c. 0.7 AU. The collective loss of CIA crust estimated for modern OMSZs and for older CSSZs is thus estimated at c. 3.2 AU. SZ additions (2.7 AU) and subtractions (23.2 AU) are similar. Because many uncertainties and assumptions are involved in assessing and applying them to the deep past, the net growth of CIA crust during at least Phanerozoic time is viewed as effectively nil. With increasing uncertainty, the long-term balance can be applied to the Proterozoic, but not before the initiation of the present style of subduction at c. 3 Ga. Allowing that since this time a rounded-down rate of recycling of 3 AU is applicable, a startlingly high volume of CIA crust equal to that existing now has been recycled to the mantle. Although the recycled volume (c. 9 ?? 109 km3) is small (c. 1%) compared with that of the mantle, it is large enough to impart to the mantle the signature of recycled CIA crust. Because subduction zones are not spatially fixed, and their average global lengths have episodically been less or greater than at present, recycling must have contributed significantly to creating recognized heterogeneities in mantle geochemistry. ?? The Geological Society of London 2009.

Discovery of the early Jurassic Gajia mélange in the Bangong-Nujiang suture zone: Southward subduction of the Bangong-Nujiang Ocean?

NASA Astrophysics Data System (ADS)

Lai, Wen; Hu, Xiumian; Zhu, Dicheng; An, Wei; Ma, Anlin

2017-06-01

Mélange records a series of geological processes associated with oceanic subduction and continental collision. This paper reports for the first time the presence of Early Jurassic mélange from NW Nagqu in the southern margin of the Bangong-Nujiang suture zone, termed as the Gajia mélange. It shows typically blocks-in-matrix structure with matrix of black shale and siliceous mudstone, and several centimeters to several meters sized blocks of sandstone, silicalite, limestone and basalt. The sandstone blocks consist of homologous sandstone and two types of exotic sandstone, with different modal compositions. The Group 1 of exotic sandstone blocks consists of mainly of feldspar and quartz, whereas the Group 2 is rich in volcanic detritus. The Group 3 of homologous sandstone blocks is rich in feldspar and volcanic detritus with rare occurrence of quartz. U-Pb age data and in situ Hf isotopic compositions of detrital zircons from sandstone blocks are similar to those from the Lhasa terrane, suggesting that the sandstone blocks in the Gajia mélange most probably came from the Lhasa terrane. The YC1σ(2+) age of homologous sandstone blocks is 177 ± 2.4 Ma, suggesting an Early Jurassic depositional age for the sandstones within the Gajia mélange. The Gajia mélange likely records the southward subduction of the Bangong-Nujiang Ocean during the Early Jurassic.

High-P metamorphic rocks from the Himalaya and their tectonic implication ? a review

NASA Astrophysics Data System (ADS)

Jan, M. Qasim

The suture zones bordering the Indian subcontinent on the E, N and W are characterized in several places by the occurrence of ophiolitic complexes and tectonic melanges. High-P metamorphic rocks have recently been discovered in the melanges in Burma, Naga Hills, southern Tibet, eastern and western Ladakh, Kohistan (Jijal, Allai, Shangla) and Khost (Afghanistan). The development of these rocks has an important bearing on the plate tectonics of the Himalaya. The High-P metamorphic rocks belong to prehnite-pumpellyite, blueschist and high-P greenschist facies but extensive garnet-granulites have developed at 35 km depth in Jijal. In the Indus-Zangbo suture zone (IZS) the high-P metamorphism is complemented to the N by low- or medium-P metamorphism and calc-alkaline magmatism in Tibet, Ladakh as well as Kohistan. High-P metamorphism in Jijal has been dated at 104 Ma, in Shangla at 70-100 Ma and in western Ladakh during mid-Cretaceous. Elsewhere, the timing of the high-P metamorphism is not known but a Cretaceous age is inferred. Since collision along the IZS occurred during Eocene, the high-P metamorphism is therefore related to the northwards subduction of the neo-Tethyan lithosphere under Tibet or late Mesozoic magmatic arcs. The timing of high-P metamorphism coincides with the breakup of India from Gondwanaland and its rapid northwards movement, whereas the tectonic melanges may principally have formed during Eocene collision and obduction.

Fingerprints of the Paleotethyan back-arc basin in Central Hainan, South China: geochronological and geochemical constraints on the Carboniferous metabasites

NASA Astrophysics Data System (ADS)

He, Huiying; Wang, Yuejun; Zhang, Yanhua; Qian, Xin; Zhang, Yuzhi

2018-03-01

Hainan of Southeast Asia has been regarded as a key area for understanding the Late Paleozoic tectonic regime and amalgamation process of the Indochina with South China Blocks that are not well constrained. This paper presents a set of new geochronological, elemental, and Sr-Nd isotopic data for the Paleozoic Bangxi and Chenxing metabasites in Central Hainan. The geochronological data show that the representative samples yield the 40Ar/39Ar plateau age of 328.1 ± 2.6 Ma and zircon U-Pb age of 330.7 ± 4.4 Ma, respectively. They are SiO2- and TiO2-poor, Al2O3-rich mafic rocks. The Chenxing samples are characterized by left-sloping chondrite-normalized REE and N-MORB-like multi-elemental patterns. The Bangxi samples have the E-MORB-like geochemical affinity. All samples show high ɛ Nd(t) values ranging from +5.61 to +9.85. Such signatures suggest their origination of a MORB-like source with the input of subduction-derived components. Our investigation has verified the presence of the Carboniferous metabasites with both MORB- and arc- like geochemical affinities at the Bangxi-Chenxing area in Central Hainan. In combination with the available data from the Jinshajiang, Ailaoshan, and Song Ma suture zones, it is proposed for the development of a Carboniferous back-arc basin along the Ailaoshan-Song Ma and Central Hainan suture zones in response to the subduction of the Paleotethyan main Ocean.

From nappe stacking to extensional detachments at the contact between the Carpathians and Dinarides - The Jastrebac Mountains of Central Serbia

NASA Astrophysics Data System (ADS)

Erak, Dalibor; Matenco, Liviu; Toljić, Marinko; Stojadinović, Uroš; Andriessen, Paul A. M.; Willingshofer, Ernst; Ducea, Mihai N.

2017-07-01

Reactivation of inherited nappe contacts is a common process in orogenic areas affected by back-arc extension. The amount of back-arc extension is often variable along the orogenic strike, owing to the evolution of arcuated mountain chains during stages of rapid slab retreat. This evolution creates low rates of extension near rotation poles, where kinematics and interplay with the pre-existing orogenic structure are less understood. The amount of Miocene extension recorded by the Pannonian Basin of Central Europe decreases SE-wards along the inherited Cretaceous - Paleogene contact between the Dinarides and Carpathian Mountains. Our study combines kinematic data obtained from field and micro-structural observations assisted with fission track thermochronological analysis and U-Pb zircon dating to demonstrate a complex poly-phase evolution in the key area of the Jastrebac Mountains of Serbia. A first event of Late Cretaceous exhumation was followed by latest Cretaceous - Eocene thrusting and magmatism related to a continental collision that sutured the accretionary wedge containing contractional trench turbidites. The suture zone was subsequently reactivated and exhumed by a newly observed Miocene extensional detachment that lasted longer in the Jastrebac Mountains when compared with similar structures situated elsewhere in the same structural position. Such extensional zones situated near the pole of extensional-driven rotation favour late stage truncations and migration of extension in a hanging-wall direction, while directions of tectonic transport show significant differences in short distances across the strike of major structures.

Influence of different length of core suture purchase among suture row on the strength of 6-strand tendon repairs.

PubMed

Okubo, Hirotaka; Kusano, Nozomu; Kinjo, Masaki; Kanaya, Fuminori

2015-01-01

In multi-strand suture methods consisting of several suture rows, the different length of core suture purchase between each suture row may affect the strength of repairs. We evaluated the influence of the different length of core suture purchase between each suture row on the strength of 6-strand tendon repairs. Rabbit flexor tendons were repaired by using a triple-looped suture technique in which the suture purchase length in each suture row was modified. Group 1, all lengths are 8-mm. Group 2, all lengths are 10-mm. Group 3, two are 10-mm and one is 8-mm. Group 4, one is 10-mm and two are 8-mm. The repaired tendons were subjected to load-to-failure test. The gap strength was significantly greater in Group 1 and Group 2 than in Group 3 and Group 4. This study demonstrates that maintaining equal core suture purchase lengths of each suture row increases the gap resistance.

Robotic suturing on the FLS model possesses construct validity, is less physically demanding, and is favored by more surgeons compared with laparoscopy.

PubMed

Stefanidis, Dimitrios; Hope, William W; Scott, Daniel J

2011-07-01

The value of robotic assistance for intracorporeal suturing is not well defined. We compared robotic suturing with laparoscopic suturing on the FLS model with a large cohort of surgeons. Attendees (n=117) at the SAGES 2006 Learning Center robotic station placed intracorporeal sutures on the FLS box-trainer model using conventional laparoscopic instruments and the da Vinci® robot. Participant performance was recorded using a validated objective scoring system, and a questionnaire regarding demographics, task workload, and suturing modality preference was completed. Construct validity for both tasks was assessed by comparing the performance scores of subjects with various levels of experience. A validated questionnaire was used for workload measurement. Of the participants, 84% had prior laparoscopic and 10% prior robotic suturing experience. Within the allotted time, 83% of participants completed the suturing task laparoscopically and 72% with the robot. Construct validity was demonstrated for both simulated tasks according to the participants' advanced laparoscopic experience, laparoscopic suturing experience, and self-reported laparoscopic suturing ability (p<0.001 for all) and according to prior robotic experience, robotic suturing experience, and self-reported robotic suturing ability (p<0.001 for all), respectively. While participants achieved higher suturing scores with standard laparoscopy compared with the robot (84±75 vs. 56±63, respectively; p<0.001), they found the laparoscopic task more physically demanding (NASA score 13±5 vs. 10±5, respectively; p<0.001) and favored the robot as their method of choice for intracorporeal suturing (62 vs. 38%, respectively; p<0.01). Construct validity was demonstrated for robotic suturing on the FLS model. Suturing scores were higher using standard laparoscopy likely as a result of the participants' greater experience with laparoscopic suturing versus robotic suturing. Robotic assistance decreases the physical demand of intracorporeal suturing compared with conventional laparoscopy and, in this study, was the preferred suturing method by most surgeons. Curricula for robotic suturing training need to be developed.

The efficacy of a single continuous nylon suture for control of post keratoplasty astigmatism.

PubMed Central

Van Meter, W

1996-01-01

PURPOSE: Post operative adjustment of a single continuous suture is an effective means of reducing post keratoplasty astigmatism. This study evaluates post keratoplasty keratometry following suture adjustment with an adjusted suture in place and after the suture is removed. METHODS: Average keratometric astigmatism was measured over 24 months time in 26 patients with an adjusted continuous suture and 24 patients with a continuous suture that was not adjusted. Average keratometry in 43 patients with an adjusted continuous suture was compared with 37 patients with combined continuous and interrupted sutures. Finally, suture out astigmatism in 19 adjusted patients was compared to six patients with no adjustment. RESULTS: There was an increase in average corneal astigmatism over two years of 2.2 diopters in the adjusted group and 1.7 diopters in the non-adjusted group with sutures in place. One year following surgery, average keratometry flattened from 47.5 to 42.9 diopters in the adjusted continuous group and from 47.0 to 46.0 diopters in the group with combined continuous and interrupted sutures. Following suture removal, average astigmatism in patients who had suture adjustment was 4.4 diopters +/- 2.5 diopters (range 1-10 diopters), and 6.01 diopters (range 4-7) in the non-adjusted group. CONCLUSIONS: Average post keratoplasty astigmatism increases after a continuous suture is adjusted but the increase is comparable to patients with acceptable astigmatism who do not require adjustment. More progressive corneal flattening over 12 months time is seen with a continuous suture than which combined sutures. Average suture out astigmatism was 4.0 diopters following suture adjustment, compared to an average of 8.4 diopters prior to adjustment. Images FIGURE 1 FIGURE 2 FIGURE 3 FIGURE 4 FIGURE 7A FIGURE 7B PMID:8981721

Aerial ULV control of Aedes aegypti with naled (Dibrom) inside simulated rural village and urban cryptic habitats

PubMed Central

Linthicum, Kenneth J.; Aldridge, Robert L.; Breidenbaugh, Mark S.; Latham, Mark D.; Connelly, Peter H.; Rush, Mattie J. E.; Remmers, Jennifer L.; Kerce, Jerry D.; Silcox, Charles A.

2018-01-01

We conducted aerial fixed wing ultra low volume (ULV) spray trials with naled to investigate penetration of exposed and simulated cryptic habitat within opened buildings, partially sealed buildings, and outdoor locations targeting sentinel adult Aedes aegypti mosquitoes in north central Florida. Mortality was observed in open and closed buildings and outdoors, even in mosquitoes placed in cryptic habitats. Observations on the impact of building type, mosquito exposure method such as placement in cryptic habitat, and spray nozzle size on mosquito mortality are described and analyzed. PMID:29352307

The lithosphere of the Antarctic continent: new insights from satellite gravity gradient data

NASA Astrophysics Data System (ADS)

Ferraccioli, Fausto; Ebbing, Jorg; Pappa, Folker; Kern, Michael; Forsberg, Rene

2017-04-01

The GOCE+Antarctica project, part of the Support to Science (STSE) program of the European Space Agency (ESA) is a new polar geosciences research initiative that aims to investigate the thermal and compositional structure of the Antarctic lithosphere by combing satellite gravity gradients (Bouman et al., 2016), airborne gravity data compilations (Scheinert et al., 2016), seismological (e.g. An et al., 2015) and petrological models in a forward and inverse manner. This approach promises to shed new light into the fundamental interplays between Antarctic lithospheric architecture, bedrock topography, ice sheet dynamics, and also its dynamic relations with Glacial Isostatic Adjustment (GIA). Here we focus on the satellite gravity gradient signatures and superimpose these on major known tectonic and bedrock topography elements, as well as independent seismically-derived estimates of crustal thickness for the Antarctic continent. An ad hoc India up reference system was used to facilitate the initial interpretation of the satellite gravity gradient data images. The GIU component clearly reveals the marked contrast between the thinner crust and lithosphere underlying the West Antarctic Rift System and also the Weddell Sea Rift System and the thicker lithosphere of East Antarctica. Notably, the new images suggests that more distributed wide-mode lithospheric and crustal extension affects the Ross Sea Embayment and continues under the Ross Ice Shelf, but this pattern is less clear towards the Bellingshousen Embayment. This suggests that the rift system narrows considerably as it reaches the southern edge of the Antarctic Peninsula, perhaps also in response to the relatively thicker crust and potentially relatively more rigid Precambrian lithosphere of the displaced Haag-Ellsworth block, which was originally located closer to East Antarctica, prior to distributed Jurassic lithospheric and crustal extension in the Weddell Sea Rift System. In East Antarctica, the satellite gravity data arguably provides one the clearest large-scale views to date of the potential extent of the Archean to Mesoproterozoic Terre Adelie Craton, and clearly shows the contrast wrt to the crust and lithosphere underlying both the Wilkes Subglacial Basin to the east and the Sabrina Subglacial Basin to the west. This finding corroborates and also augments recent independent interpretations of aeromagnetic and airborne gravity data over the region, suggesting that the Mawson Continent is a composite lithospheric-scale entity, which was affected by several Paleoproterozoic and Mesoproterozoic orogenic events (Aitken et al., 2016). Thick crust is clearly imaged beneath the Transantarctic Mountains, the Terre Adelie Craton, the Gamburtsev Subglacial Mountains and also Eastern Dronning Maud Land, in particular beneath the recently proposed region of the Tonian Oceanic Arc Superterrane (Jacobs et al., 2015). The GIA and GIU components help delineate the edges of several of these lithospheric provinces, both in West and East Antarctica. One of the largest and previously unknown lithospheric-scale features discovered in East Antarctica from the satellite gravity gradient images is a linear feature that appears to cut across East Antarctica, potentially extending from the area of the Lutzow Holm Complex on the Indian side of East Antarctica right across the continent to South Pole. We name this feature the Trans East Antarctic Shear Zone and propose that it represents a major lithospheric scale shear zone and possibly a major suture zone that separates the Gamburtsev Province from the Eastern Dronning Maud Land Province and also appears to form the southern boundary of the composite Recovery Province. We infer based on geological data in the Lutzow Holm Complex region and formerly adjacent segments of India and Madagascar and eastern Africa that it may represent a major hitherto unrecongnised Pan-African age suture zone related to the assembly of the Gondwana supercontinent. New aerogeophysical surveys in interior East Antarctica, between the Recovery region, the Gamburtsev Province and the southern edge of the Eastern Dronning Maud Province are however required to investigate the detailed crustal architecture, evolution and also kinematics of this newly proposed shear/suture zone and to help understand its relationships with the previously proposed Gamburtsev and Shackleton Range suture zones.

Suture Coding: A Novel Educational Guide for Suture Patterns.

PubMed

Gaber, Mohamed; Abdel-Wahed, Ramadan

2015-01-01

This study aims to provide a helpful guide to perform tissue suturing successfully using suture coding-a method for identification of suture patterns and techniques by giving full information about the method of application of each pattern using numbers and symbols. Suture coding helps construct an infrastructure for surgical suture science. It facilitates the easy understanding and learning of suturing techniques and patterns as well as detects the relationship between the different patterns. Guide points are fixed on both edges of the wound to act as a guideline to help practice suture pattern techniques. The arrangement is fixed as 1-3-5-7 and a-c-e-g on one side (whether right or left) and as 2-4-6-8 and b-d-f-h on the other side. Needle placement must start from number 1 or letter "a" and continue to follow the code till the end of the stitching. Some rules are created to be adopted for the application of suture coding. A suture trainer containing guide points that simulate the coding process is used to facilitate the learning of the coding method. (120) Is the code of simple interrupted suture pattern; (ab210) is the code of vertical mattress suture pattern, and (013465)²/3 is the code of Cushing suture pattern. (0A1) Is suggested as a surgical suture language that gives the name and type of the suture pattern used to facilitate its identification. All suture patterns known in the world should start with (0), (A), or (1). There is a relationship between 2 or more surgical patterns according to their codes. It can be concluded that every suture pattern has its own code that helps in the identification of its type, structure, and method of application. Combination between numbers and symbols helps in the understanding of suture techniques easily without complication. There are specific relationships that can be identified between different suture patterns. Coding methods facilitate suture patterns learning process. The use of suture coding can be a good approach to the construction of an infrastructure of surgical suture science and the facilitation of the understanding and learning of suture pattern techniques. Copyright © 2015 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

Reduction of excess sludge in a sequencing batch reactor by lysis-cryptic growth using quick lime for disintegration under low temperature.

PubMed

Lv, Xiao-Mei; Song, Ju-Sheng; Li, Ji; Zhai, Kun

2017-08-01

In the present study, quick-lime-based thermal-alkaline sludge disintegration (SD) under low temperature was combined with cryptic growth to investigate the excess sludge reduction efficiency in the sequencing batch reactor (SBR). The optimized condition of SD was as follows: T = 80℃, pH = 11, t = 180 min, and the SD rate was about 42.1%. With 65.6% of excess sludge disintegrated and returned to the SBR, the system achieved sludge reduction rate of about 40.1%. The lysis-cryptic growth still obtained satisfactory sludge reduction efficiency despite the comparative low SD rate, which suggested that disintegration rate might not be the decisive factor for cryptic-growth-based sludge reduction. Lysis-cryptic growth did not impact the effluent quality, yet the phosphorus removal performance was enhanced, with effluent total phosphorus concentration decreased by 0.3 mg/L (33%). Crystal compounds of calcium phosphate precipitate were detected in the system by Fourier transform infrared spectroscopy and X-ray diffraction, which indicated the phosphorus removal potential of SD using lime. Moreover, endogenous dehydrogenase activity of activated sludge in the lysis-cryptic system was enhanced, which was beneficial for sludge reduction. SD and cryptic growth in the present study demonstrates an economical and effective approach for sludge reduction.

DNA barcoding applied to ex situ tropical amphibian conservation programme reveals cryptic diversity in captive populations.

PubMed

Crawford, Andrew J; Cruz, Catalina; Griffith, Edgardo; Ross, Heidi; Ibáñez, Roberto; Lips, Karen R; Driskell, Amy C; Bermingham, Eldredge; Crump, Paul

2013-11-01

Amphibians constitute a diverse yet still incompletely characterized clade of vertebrates, in which new species are still being discovered and described at a high rate. Amphibians are also increasingly endangered, due in part to disease-driven threats of extinctions. As an emergency response, conservationists have begun ex situ assurance colonies for priority species. The abundance of cryptic amphibian diversity, however, may cause problems for ex situ conservation. In this study we used a DNA barcoding approach to survey mitochondrial DNA (mtDNA) variation in captive populations of 10 species of Neotropical amphibians maintained in an ex situ assurance programme at El Valle Amphibian Conservation Center (EVACC) in the Republic of Panama. We combined these mtDNA sequences with genetic data from presumably conspecific wild populations sampled from across Panama, and applied genetic distance-based and character-based analyses to identify cryptic lineages. We found that three of ten species harboured substantial cryptic genetic diversity within EVACC, and an additional three species harboured cryptic diversity among wild populations, but not in captivity. Ex situ conservation efforts focused on amphibians are therefore vulnerable to an incomplete taxonomy leading to misidentification among cryptic species. DNA barcoding may therefore provide a simple, standardized protocol to identify cryptic diversity readily applicable to any amphibian community. © 2012 John Wiley & Sons Ltd.

Detrital Cr-spinel in the Šambron-Kamenica Zone (Slovakia): evidence for an ocean-spreading zone in the Northern Vardar suture?

NASA Astrophysics Data System (ADS)

Lenaz, Davide; Mazzoli, Claudio; Spišiak, Jan; Princivalle, Francesco; Maritan, Lara

2009-03-01

The Šambron-Kamenica Zone is situated on the northern margin of the Levočské vrchy mountains and Šarišskà vrchovina Highland, where the Central Carpathian Paleogene joins the Pieniny Klippen Belt. Sandstone outcrops in this area. From Cretaceous to Late Oligocene in age, these sediments suggest transport directions from S and SE. The heavy mineral assemblages of this sandstone include Cr-spinel grains, mainly displaying types II and III alpine-peridotite affinities, and are representative of Ocean Island Basalt volcanism. A sample from Upper Eocene sediments at Vit’az shows a clear change in Cr-spinel composition, which turns out to have types I and II peridotite affinities, and to derive from arc and Middle Ocean Ridge Basalt volcanism, with sediment transport directions from SW and WSW. These data indicate major variations in the Upper Eocene tectonic setting, giving constraints to paleogeographic reconstruction of the Slovak Central Carpathians.

Effect of wrist and interphalangeal thumb movement on zone T2 flexor pollicis longus tendon tension in a human cadaver model.

PubMed

Rappaport, Patricia O; Thoreson, Andrew R; Yang, Tai-Hua; Reisdorf, Ramona L; Rappaport, Stephen M; An, Kai-Nan; Amadio, Peter C

2015-01-01

Therapy after flexor pollicis longus (FPL) repair typically mimics finger flexor management, but this ignores anatomic and biomechanical features unique to the FPL. We measured FPL tendon tension in zone T2 to identify biomechanically appropriate exercises for mobilizing the FPL. Eight human cadaver hands were studied to identify motions that generated enough force to achieve FPL movement without exceeding hypothetical suture strength. With the carpometacarpal and metacarpophalangeal joints blocked, appropriate forces were produced for both passive interphalangeal (IP) motion with 30° wrist extension and simulated active IP flexion from 0° to 35° with the wrist in the neutral position. This work provides a biomechanical basis for safely and effectively mobilizing the zone T2 FPL tendon. Our cadaver study suggests that it is safe and effective to perform early passive and active exercise to an isolated IP joint. NA. Copyright © 2015 Hanley & Belfus. Published by Elsevier Inc. All rights reserved.

Causative Agents of Aspergillosis Including Cryptic Aspergillus Species and A. fumigatus.

PubMed

Toyotome, Takahito

2016-01-01

Aspergillosis is an important deep mycosis. The causative agents are Aspergillus fumigatus, Aspergillus flavus, Aspergillus niger, and Aspergillus terreus, of which A. fumigatus is the most prevalent. Cryptic Aspergillus spp., which morphologically resemble representative species of each Aspergillus section, also cause aspergillosis. Most of the cryptic species reveal different susceptibility patterns and/or different secondary metabolite profiles, also called exometabolome in this manuscript, from those representative species. On the other hand, azole-resistant A. fumigatus strains in clinical specimens and in the environment have been reported. Therefore, it is imperative to precisely identify the species, including cryptic Aspergillus spp., and evaluate the susceptibility of isolates.In this manuscript, some of the causative cryptic Aspergillus spp. are briefly reviewed. In addition, the exometabolome of Aspergillus section Fumigati is described. Finally, azole resistance of A. fumigatus is also discussed, in reference to several studies from Japan.

Multi-resistant aspergillosis due to cryptic species.

PubMed

Howard, Susan Julie

2014-12-01

Reports of cryptic species causing aspergillosis in humans are increasing in the literature. Cryptic species are defined as those which are morphologically indistinguishable, although their identifications can be confirmed using molecular or other techniques which continue to become more widely available in the clinical setting. Antifungal resistance has often been noted in these cases, and indeed there does appear to be a higher prevalence of reduced susceptibility in cryptic species. Many of these observations are published as individual case reports or as a small component of larger data sets, making it challenging to review and compare the data fully. This review article seeks to describe the susceptibility trends and key learning outcomes of specific cases of infections caused by cryptic species, including Aspergillus alliaceus, Aspergillus calidoustus, Aspergillus felis, Aspergillus lentulus, Aspergillus tubingensis, Aspergillus viridinutans and Neosartorya pseudofischeri. These reports highlight the clinical need for full accurate identification and susceptibility testing to guide patient care.

Comparison of the cheese-wiring effects among three sutures used in rotator cuff repair

PubMed Central

Lambrechts, Mark; Nazari, Behrooz; Dini, Arash; O'Brien, Michael J.; Heard, Wendell M. R.; Savoie, Felix H.; You, Zongbing

2014-01-01

Purpose: The goal of this study was to compare the cheese-wiring effects of three sutures with different coefficients of friction. Materials and Methods: Sixteen human cadaveric shoulders were dissected to expose the distal supraspinatus and infraspinatus muscle tendons. Three sutures were stitched through the tendons: #2 Orthocord™ suture (reference #223114, DePuy Mitek, Inc., Raynham, MA), #2 ETHIBOND* EXCEL Suture, and #2 FiberWire® suture (FiberWire®, Arthrex, Naples, FL). The sutures were pulled by cyclic axial forces from 10 to 70 N at 1 Hz for 1000 cycles through a MTS machine. The cut-through distance on the tendon was measured with a digital caliper. Results: The cut-through distance in the supraspinatus tendons (mean ± standard deviation, n = 12) were 2.9 ± 0.6 mm for #2 Orthocord™ suture, 3.2 ± 1.2 mm for #2 ETHIBOND* suture, and 4.2 ± 1.7 mm for #2 FiberWire® suture. The differences were statistically significant analyzing with analysis of variance (P = 0.047) and two-tailed Student's t-test, which showed significance between Orthocord™ and FiberWire® sutures (P = 0.026), but not significant between Orthocord™ and ETHIBOND* sutures (P = 0.607) or between ETHIBOND* and FiberWire® sutures (P = 0.103). Conclusion: The cheese-wiring effect is less in the Orthocord™ suture than in the FiberWire® suture in human cadaveric supraspinatus tendons. Clinical Relevance: Identification of sutures that cause high levels of tendon cheese-wiring after rotator cuff repair can lead to better suture selection. PMID:25258499

Extensional unroofing of the metamorphic core of the southern Appalachian orogen prior to the breakup of Pangea: Insights from 40Ar/39Ar thermochronology

NASA Astrophysics Data System (ADS)

Ma, C.; Foster, D. A.; Hames, W. E.; Mueller, P. A.

2017-12-01

Orogenic collapse commonly occurs following the collisional phase of an orogeny and often leads to exhumation of deep crustal metamorphic rocks. The Alleghanian orogeny in the southern Appalachian orogen (SAO) occurred during final assembly of Pangea. 40Ar/39Ar data of hornblende, muscovite, and biotite from Alleghanian granitic plutons in Georgia, Alabama, and Florida of the SAO give cooling ages that progressively young toward the south-southeast prior to ca. 280 Ma and young locally toward the north-northwest after ca. 280 Ma. These cooling-age gradients, along with geometry of the Suwannee suture zone and timing/structures of the South Georgia basin, suggest that metamorphic rocks north of the Suwannee suture in the study area formed the lower plate of a metamorphic core complex. The faults of the Suwannee suture zone were reactivated to form a master extensional detachment fault with the Suwannee terrane comprising the upper plate. Thermochronologic data show that rapid extension of the metamorphic core complex footwall started at ca. 300-295 Ma and the extension continued to at least ca. 240 Ma. The maximum average extension rate is estimated to be 10.3 km/m.y. during ca. 300-280 Ma along the master detachment fault and 2.4 km/m.y. during ca. 280-240 Ma along a secondary detachment fault, reflecting differential extension over time. Main cooling rates of 10‒85˚C/m.y. and exhumation rates of 0.3‒2.8 km/m.y. are calculated for the Alleghanian granitic plutons studied. This work shows that, in the southernmost Appalachians, orogenic collapse resulted in metamorphic core complex-style extension between about 300 and 240 Ma. The horst-and-graben systems of the South Georgia basin formed within the upper plate in this tectonic setting. Metamorphic core complex-style extension, therefore, played a critical role in initial rifting that led to the eventual breakup of Pangea and formation of the Atlantic Ocean and the Gulf of Mexico.

[Application of three-stitch preventive transverse colostomy in anterior resection of low rectal cancer].

PubMed

Zhao, Yuzhou; Han, Guangsen; Huo, Mingke; Wei, Li; Zou, Qiyun; Zhang, Yuji; Li, Jian; Gu, Yanhui; Cao, Yanghui; Zhang, Shijia

2017-04-25

To explore the application of three-stitch preventive transverse colostomy in anterior resection of low rectal cancer. From May 2015 to March 2016, 70 consecutive low rectal cancer patients undergoing anterior resection and preventive transverse colostomy in our department were recruited in this prospective study. According to the random number table method, 70 patients were divided into three-stitch transverse colostomy group(observation group, n=35) and traditional transverse colostomy group(control group, n=35). Procedure of three-stitch preventive transverse colostomy was as follows: firstly, at the upper 1/3 incision 0.5-1.0 cm distance from the skin, 7# silk was used to suture from outside to inside, then the needle belt line went through the transverse edge of the mesangial avascular zone. At the lower 1/3 incision 0.5-1.0 cm distance from the skin, 7# silk was used to suture from inside to outside, then silk went through the transverse edge of the mesangial avascular zone again and was ligatured. Finally, in the upper and lower ends of the stoma, 7# silk was used to suture and fix transverse seromuscular layer and the skin. The operation time and morbidity of postoperative complications associated with colostomy were compared between two groups. There were no significant differences in baseline data between the two groups(all P>0.05). The operative time of observation group was shorter than that of control group [(3.2±1.3) min vs. (15.5±3.4) min, P<0.05]. Incidences of colostomy skin-mucous separation, dermatitis, stoma rebound were significantly lower in observation group [5.7%(2/35) vs. 34.3%(12/35), P=0.007; 8.6%(3/35) vs. 31.4%(11/35), P=0.036; 0 vs. 17.1%(6/35), P=0.025, respectively], while incidences of parastomal hernia and stoma prolapse in two groups were similar (both P>0.05). Compared with traditional transverse colostomy method, the three-stitch preventive transverse colostomy has more operating advantages and can reduce postoperative complications associated with colostomy.

Ar-Ar and Rb-Sr dating of very low-/low-grade metamorphism along the main Iapetus suture, Newfoundland

NASA Astrophysics Data System (ADS)

Willner, Arne P.; Glodny, Johannes; Massonne, Hans-Joachim; Romer, Rolf L.; Sudo, Masafumi; Van Staal, Cees R.; Zagorevski, Alexandre

2013-04-01

The Late Ordovician closure of the main tract of Iapetus resulted in juxtaposition of the leading edge of the peri-Gondwanan microplate Ganderia and the composite Laurentian margin. The suture is the Red Indian Line, which separates the Iapetan realm into peri-Gondwanan and peri-Laurentian arc-backarc complexes. The discrete Red Indian Line forms part of a wider collision zone that has a protracted and complicated tectonic history starting with underplating of oceanic terranes beneath the composite margin of Laurentia at ca. 471 Ma during the early stages of the Taconic orogeny. Final collision along the Red Indian Line and closure of the Iapetus ocean occurred at 455 Ma with the underthrusting of the peri-Gondwanan Victoria arc and its Ganderian basement beneath the composite Laurentian margin. The accreted Iapetan realm terranes were progressively deformed during the closure of a remaining Iapetan marginal basin, resulting locally in significant overprint and reactivation during the Silurian (Salinic orogeny). Metamorphic overprint in the deformed Laurentia margin (Notre Dame Zone) above the Red Indian Line is mainly of very low grade to low grade and very heterogeneous. PT-conditions cluster at 3-5 kbar, 300-400°C and 6-7 kbar, 270-330°C. Medium grade conditions are related to local contact metamorphism. Ages of the local peak metamorphism in the peri-Laurentian Iapetan realm were determined by dating white mica with the Ar-Ar system and white mica-bearing assemblages with the Rb-Sr mineral isochron method. Both methods yielded ages that postdate the closure of the main tract of Iapetus. These generally belong to two age ranges: 418-430 Ma (Salinic events) and 350-390 Ma Neoacadian events). Partly two overprints can be detected in one and the same sample. Metamorphism is related to (1) reactivation of deformation in shear zones which partly cause further crustal thickening or strike slip-related deformation, (2) to external fluid influx, (3) to advective heating by synkinematic intrusions or (4) to a combination of these effects. Salinic to Neoacadian postcollisional processes in the collision zone apparently are much more widespread than formerly recognized.

Varying Indian crustal front in the southern Tibetan Plateau as revealed by magnetotelluric data

NASA Astrophysics Data System (ADS)

Xie, Chengliang; Jin, Sheng; Wei, Wenbo; Ye, Gaofeng; Zhang, Letian; Dong, Hao; Yin, Yaotian

2017-10-01

In the southern Tibetan plateau, which is considered to be the ongoing India-Eurasia continental collision zone, tracing of the Indian crustal front beneath Tibet is still controversial. We conducted deep subsurface electrical modeling in southern Tibet and discuss the geometry of the front of the Indian crust. Three areas along the Yarlung-Zangbo river zone for which previous magnetotelluric (MT) data are available were inverted independently using a three-dimensional MT inversion algorithm ModEM. Electrical horizontal slices at different depths and north-south oriented cross sections at different longitudes were obtained to provide a geoelectrical perspective for deep processes beneath the Tethyan Himalaya and Lhasa terrane. Horizontal slices at depths greater than - 15 km show that the upper crust is covered with resistive layers. Below a depth of - 20 km, discontinuous conductive distributions are primarily concentrated north of the Yarlung-Zangbo sutures (YZS) and could be imaged from mid- to lower crust. The results show that the maximum depth to which the resistive layers extend is over - 20 km, while the mid- to lower crustal conductive zones extend to depths greater than - 50 km. The results indicate that the conductive region in the mid- to lower crust can be imaged primarily from the YZS to south of the Bangong-Nujiang sutures in western Tibet and to 31°N in eastern Tibet. The northern front of the conductive zones appears as an irregular barrier to the Indian crust from west to east. We suggest that a relatively less conductive subsurface in the northern portion of the barrier indicates a relatively cold and strong crust and that the front of the Indian crust might be halted in the south of the barrier. We suggest that the Indian crustal front varies from west to east and has at least reached: 33.5°N at 80°E, 31°N at 85°E, and 30.5°N at 87°E and 92°E.[Figure not available: see fulltext.

Seamount subduction at seismogenic depths: structural and metamorphic evidence from the Zagros suture zone

NASA Astrophysics Data System (ADS)

Bonnet, G.; Agard, P.; Angiboust, S.; Fournier, M.; Omrani, J.

2017-12-01

Large-scale seafloor topographic features, such as seamounts, are for the most part subducted with the downgoing oceanic plate. They are expected to critically impact the seismogenic and mechanic behavior of subduction zones, but their exact role is strongly debated (i.e., as to whether they represent barriers to propagation or asperities promoting nucleation). Rare natural examples of metamorphosed seamounts, which got sliced off the slab along the plate interface and escaped recycling into the mantle, are therefore precious witnesses to document processes operating at depths of 0-30 km. We herein report the existence of a large-scale oceanic topographic structure sandwiched in the Zagros suture zone (Siah Kuh - SK - unit), most probably a former seamount, along with other blueschist units (Angiboust et al., EPSL 2016). The main criteria for identifying this seamount are its: (1) shape: the SK unit is a 1.5-2 km thick, rounded-shaped body with a 15-20 km diameter, (2) lithologies: it is made mainly of a regular succession of massive basaltic flows, commonly as pillow basalts, minor ophiolite-type gabbros and serpentinite, together with subordinate more differenciated volcanic and plutonic rocks. (3) sedimentary cover: basalts are overlain by shallowly deposited reef limestone and deepening-up sediments with the occurrence of cherts and pelagic limestones (which points to possible subsidence). Basalts have been analyzed for trace elements and have usually a N-MORB to OIB signature, which might be explained by its potential origin as a mid-oceanic ridge seamount. HP-LT minerals (lawsonite, aragonite, blue amphiboles) found across the whole structure, particularly in zones of localized compressive deformation, indicate that this seamount was shallowly subducted at 20 km. This deformation, interpreted to be syn-subduction, is assisted by a décollement rooting in serpentinite and/or oceanic metasediments and is associated with rare cataclase in magmatic rocks. We interpret these structures as related to the internal slicing of the seamount in subduction. The presence of these soft layers may prevent seismogenic deformation, since no pseudotachylites have been found.

Effects of diode laser welding with dye-enhanced glue on tensile strength of sutures commonly used in urology.

PubMed

Kirsch, A J; Chang, D T; Kayton, M L; Libutti, S K; Connor, J P; Hensle, T W

1996-01-01

Tissue welding using laser-activated protein solders may soon become an alternative to sutured tissue approximation. In most cases, approximating sutures are used both to align tissue edges and provide added tensile strength. Collateral thermal injury, however, may cause disruption of tissue alignment and weaken the tensile strength of sutures. The objective of this study was to evaluate the effect of laser welding on the tensile strength of suture materials used in urologic surgery. Eleven types of sutures were exposed to diode laser energy (power density = 15.9 W/cm2) for 10, 30, and 60 seconds. Each suture was compared with and without the addition of dye-enhanced albumin-based solder. After exposure, each suture material was strained (2"/min) until ultimate breakage on a tensometer and compared to untreated sutures using ANOVA. The strength of undyed sutures were not significantly affected; however, violet and green-dyed sutures were in general weakened by laser exposure in the presence of dye-enhanced glue. Laser activation of the smallest caliber, dyed sutures (7-0) in the presence of glue caused the most significant loss of tensile strength of all sutures tested. These results indicate that the thermal effects of laser welding using our technique decrease the tensile strength of dyed sutures. A thermally resistant suture material (undyed or clear) may prevent disruption of wounds closed by laser welding techniques.

Prevalence of cryptic species in morphologically uniform taxa - fast speciation and evolutionary radiation in Asian toads.

PubMed

Liu, Zuyao; Chen, Guoling; Zhu, Tianqi; Zeng, Zhaochi; Lyu, Zhitong; Wang, Jian; Messenger, Kevin; Greenberg, Anthony J; Guo, Zixiao; Yang, Ziheng; Shi, Suhua; Wang, Yingyong

2018-06-16

Diversity and distributions of cryptic species have long been a vexing issue. Identification of species boundaries is made difficult by the lack of obvious morphological differences. Here, we investigate the cryptic diversity and evolutionary history of an underappreciated group of Asian frog species (Megophrys) to explore the pattern and dynamic of amphibian cryptic species. We sequenced four mitochondrial genes and five nuclear genes and delineated species using multiple approaches, combining DNA and mating-call data. A Bayesian species tree was generated to estimate divergence times and to reconstruct ancestral ranges. Macroevolutionary analyses and hybridization tests were conducted to explore the evolutionary dynamics of this cryptic group. Our phylogenies support the current subgenera. We revealed 43 cryptic species, 158% higher than previously thought. The species-delimitation results were further confirmed by mating-call data and morphological divergence. We found that these Asian frogss entered China from the Sunda Shelf 48 Mya, followed by an ancient radiation event during middle Miocene. We confirmed the efficiency of the multispecies coalescent model for delimitation of species with low morphological diversity. Species diversity of Megophrys is severely underappreciated, and species distributions have been misestimated as a result. Copyright © 2018. Published by Elsevier Inc.

Comparison between suture anchor and transosseous suture for the modified-Broström procedure.

PubMed

Cho, Byung-Ki; Kim, Yong-Min; Kim, Dong-Soo; Choi, Eui-Sung; Shon, Hyun-Chul; Park, Kyoung-Jin

2012-06-01

This prospective, randomized study was conducted to compare clinical outcomes of the modified Broström procedure using suture anchor or transosseous suture technique for chronic ankle instability. Forty patients were followed for more than 2 years after modified Broström procedure. Twenty procedures using a suture anchor and 20 procedures using a transosseous suture were performed by one surgeon. The clinical evaluation consisted of the Karlsson scale and the Sefton grading system. Talar tilt and anterior talar translation were measured on anterior and varus stress radiographs. The Karlsson scale had improved significantly to 90.8 points in the suture anchor group, and to 89.2 points in the transosseous suture group. According to Sefton grading system, 18 patients (90%) in suture anchor group and 17 patients (85%) in transosseous suture group achieved satisfactory results. The talar tilt angle and anterior talar translation improved significantly to 5.9 degrees and 4.2 mm in suture anchor group, and to 5.4 degrees and 4.1 mm in transosseous suture group, respectively. No significant differences existed in clinical and functional outcomes between the two techniques for ligament reattachment. Both modified Broström procedures using the suture anchor and transosseous suture seem to be effective treatment methods for chronic lateral ankle instability.

Gravity anomalies, plate tectonics and the lateral growth of Precambrian North America

NASA Technical Reports Server (NTRS)

Thomas, M. D.; Grieve, R. A. F.; Sharpton, V. L.

1988-01-01

The widespread gravity coverage of North America provides a picture of the gross structural fabric of the continent via the trends of gravity anomalies. The structural picture so obtained reveals a mosaic of gravity trend domains, many of which correlate closely with structural provinces and orogenic terranes. The gravity trend map, interpreted in the light of plate-tectonic theory, thus provides a new perspective for examining the mode of assembly and growth of North America. Suture zones, palaeosubduction directions, and perhaps, contrasting tectonic histories may be identified using gravity patterns.

Knotless anchors with sutures external to the anchor body may be at risk for suture cutting through osteopenic bone

PubMed Central

Ono, Y.; Woodmass, J. M.; Nelson, A. A.; Boorman, R. S.; Thornton, G. M.

2016-01-01

Objectives This study evaluated the mechanical performance, under low-load cyclic loading, of two different knotless suture anchor designs: sutures completely internal to the anchor body (SpeedScrew) and sutures external to the anchor body and adjacent to bone (MultiFIX P). Methods Using standard suture loops pulled in-line with the rotator cuff (approximately 60°), anchors were tested in cadaveric bone and foam blocks representing normal to osteopenic bone. Mechanical testing included preloading to 10 N and cyclic loading for 500 cycles from 10 N to 60 N at 60 mm/min. The parameters evaluated were initial displacement, cyclic displacement and number of cycles and load at 3 mm displacement relative to preload. Video recording throughout testing documented the predominant source of suture displacement and the distance of ‘suture cutting through bone’. Results In cadaveric bone and foam blocks, MultiFIX P anchors had significantly greater initial displacement, and lower number of cycles and lower load at 3 mm displacement than SpeedScrew anchors. Video analysis revealed ‘suture cutting through bone’ as the predominant source of suture displacement in cadaveric bone (qualitative) and greater ‘suture cutting through bone’ comparing MultiFIX P with SpeedScrew anchors in foam blocks (quantitative). The greater suture displacement in MultiFIX P anchors was predominantly from suture cutting through bone, which was enhanced in an osteopenic bone model. Conclusions Anchors with sutures external to the anchor body are at risk for suture cutting through bone since the suture eyelet is at the distal tip of the implant and the suture directly abrades against the bone edge during cyclic loading. Suture cutting through bone may be a significant source of fixation failure, particularly in osteopenic bone. Cite this article: Y. Ono, J. M. Woodmass, A. A. Nelson, R. S. Boorman, G. M. Thornton, I. K. Y. Lo. Knotless anchors with sutures external to the anchor body may be at risk for suture cutting through osteopenic bone. Bone Joint Res 2016;5:269–275. DOI: 10.1302/2046-3758.56.2000535. PMID:27357383

Knotless anchors with sutures external to the anchor body may be at risk for suture cutting through osteopenic bone.

PubMed

Ono, Y; Woodmass, J M; Nelson, A A; Boorman, R S; Thornton, G M; Lo, I K Y

2016-06-01

This study evaluated the mechanical performance, under low-load cyclic loading, of two different knotless suture anchor designs: sutures completely internal to the anchor body (SpeedScrew) and sutures external to the anchor body and adjacent to bone (MultiFIX P). Using standard suture loops pulled in-line with the rotator cuff (approximately 60°), anchors were tested in cadaveric bone and foam blocks representing normal to osteopenic bone. Mechanical testing included preloading to 10 N and cyclic loading for 500 cycles from 10 N to 60 N at 60 mm/min. The parameters evaluated were initial displacement, cyclic displacement and number of cycles and load at 3 mm displacement relative to preload. Video recording throughout testing documented the predominant source of suture displacement and the distance of 'suture cutting through bone'. In cadaveric bone and foam blocks, MultiFIX P anchors had significantly greater initial displacement, and lower number of cycles and lower load at 3 mm displacement than SpeedScrew anchors. Video analysis revealed 'suture cutting through bone' as the predominant source of suture displacement in cadaveric bone (qualitative) and greater 'suture cutting through bone' comparing MultiFIX P with SpeedScrew anchors in foam blocks (quantitative). The greater suture displacement in MultiFIX P anchors was predominantly from suture cutting through bone, which was enhanced in an osteopenic bone model. Anchors with sutures external to the anchor body are at risk for suture cutting through bone since the suture eyelet is at the distal tip of the implant and the suture directly abrades against the bone edge during cyclic loading. Suture cutting through bone may be a significant source of fixation failure, particularly in osteopenic bone.Cite this article: Y. Ono, J. M. Woodmass, A. A. Nelson, R. S. Boorman, G. M. Thornton, I. K. Y. Lo. Knotless anchors with sutures external to the anchor body may be at risk for suture cutting through osteopenic bone. Bone Joint Res 2016;5:269-275. DOI: 10.1302/2046-3758.56.2000535. © 2016 Lo et al.

Reproductive isolation and patterns of genetic differentiation in a cryptic butterfly species complex

PubMed Central

Dincâ, V; Wiklund, C; Lukhtanov, V A; Kodandaramaiah, U; Norén, K; Dapporto, L; Wahlberg, N; Vila, R; Friberg, M

2013-01-01

Molecular studies of natural populations are often designed to detect and categorize hidden layers of cryptic diversity, and an emerging pattern suggests that cryptic species are more common and more widely distributed than previously thought. However, these studies are often decoupled from ecological and behavioural studies of species divergence. Thus, the mechanisms by which the cryptic diversity is distributed and maintained across large spatial scales are often unknown. In 1988, it was discovered that the common Eurasian Wood White butterfly consisted of two species (Leptidea sinapis and Leptidea reali), and the pair became an emerging model for the study of speciation and chromosomal evolution. In 2011, the existence of a third cryptic species (Leptidea juvernica) was proposed. This unexpected discovery raises questions about the mechanisms preventing gene flow and about the potential existence of additional species hidden in the complex. Here, we compare patterns of genetic divergence across western Eurasia in an extensive data set of mitochondrial and nuclear DNA sequences with behavioural data on inter- and intraspecific reproductive isolation in courtship experiments. We show that three species exist in accordance with both the phylogenetic and biological species concepts and that additional hidden diversity is unlikely to occur in Europe. The Leptidea species are now the best studied cryptic complex of butterflies in Europe and a promising model system for understanding the formation of cryptic species and the roles of local processes, colonization patterns and heterospecific interactions for ecological and evolutionary divergence. PMID:23909947

Left-right axis asymmetry determining human Cryptic gene is transcriptionally repressed by Snail.

PubMed

Gupta, Kartik; Pilli, Vijaya Satish Sekhar; Aradhyam, Gopala Krishna

2016-10-28

Establishment of the left-right axis is important for positioning organs asymmetrically in the developing vertebrate-embryo. A number of factors like maternally deposited molecules have emerged essential in initiating the specification of the axis; the downstream events, however, are regulated by signal-transduction and gene-expression changes identifying which remains a crucial challenge. The EGF-CFC family member Cryptic, that functions as a co-receptor for some TGF-beta ligands, is developmentally expressed in higher mammals and mutations in the gene cause loss or change in left-right axis asymmetry. Despite the strong phenotype, no transcriptional-regulator of this gene is known till date. Using promoter-analyses tools, we found strong evidence that the developmentally essential transcription factor Snail binds to the human Cryptic-promoter. We cloned the promoter-region of human Cryptic in a reporter gene and observed decreased Cryptic-promoter activation upon increasing Snail expression. Further, the expression of Cryptic is down-regulated upon exogenous Snail expression, validating the reporter assays and the previously identified role of Snail as a transcriptional repressor. Finally, we demonstrate using gel-shift assay that Snail in nuclear extract of PANC1 cells interacts with the promoter-construct bearing putative Snail binding sites and confirm this finding using chromatin immunoprecipitation assay. Snail represses the expression of human Cryptic and therefore, might affect the signaling via Nodal that has previously been demonstrated to specify the left-right axis using the EGF-CFC co-receptors.

Tracing shifts of oceanic fronts using the cryptic diversity of the planktonic foraminifera Globorotalia inflata

NASA Astrophysics Data System (ADS)

Morard, Raphaël.; Reinelt, Melanie; Chiessi, Cristiano M.; Groeneveld, Jeroen; Kucera, Michal

2016-09-01

The use of planktonic foraminifera in paleoceanographic studies relies on the assumption that morphospecies represent biological species with ecological preferences that are stable through time and space. However, genetic surveys unveiled a considerable level of diversity in most morphospecies of planktonic foraminifera. This diversity is significant for paleoceanographic applications because cryptic species were shown to display distinct ecological preferences that could potentially help refine paleoceanographic proxies. Subtle morphological differences between cryptic species of planktonic foraminifera have been reported, but so far, their applicability within paleoceanographic studies remains largely unexplored. Here we show how information on genetic diversity can be transferred to paleoceanography using Globorotalia inflata as a case study. The two cryptic species of G. inflata are separated by the Brazil-Malvinas Confluence (BMC), a major oceanographic feature in the South Atlantic. Based on this observation, we developed a morphological model of cryptic species detection in core top material. The application of the cryptic species detection model to Holocene samples implies latitudinal oscillations in the position of the confluence that are largely consistent with reconstructions obtained from stable isotope data. We show that the occurrence of cryptic species in G. inflata can be detected in the fossil record and used to trace the migration of the BMC. Since a similar degree of morphological separation as in G. inflata has been reported from other species of planktonic foraminifera, the approach presented in this study can potentially yield a wealth of new paleoceanographical proxies.

Cryptic biodiversity and phylogeographic patterns of Seychellois Ligia isopods

PubMed Central

Bluemel, Joanna K.; Bunbury, Nancy; Curran, Melinda

2017-01-01

Ligia isopods are conspicuous inhabitants of rocky intertidal habitats exhibiting several biological traits that severely limit their dispersal potential. Their presence in patchy habitats and low vagility may lead to long term isolation, allopatric isolation and possible cryptic speciation. Indeed, various species of Ligia have been suggested to represent instead cryptic species complexes. Past studies; however, have largely focused in Eastern Pacific and Atlantic species of Ligia, leaving in doubt whether cryptic diversity occurs in other highly biodiverse areas. The Seychelles consists of 115 islands of different ages and geological origins spread across the western Indian Ocean. They are well known for their rich biodiversity with recent reports of cryptic species in terrestrial Seychellois organisms. Despite these studies, it is unclear whether coastal invertebrates from the Seychelles harbor any cryptic diversity. In this study, we examined patterns of genetic diversity and isolation within Ligia isopods across the Seychelles archipelago by characterizing individuals from locations across both inner and outer islands of the Seychelles using mitochondrial and nuclear markers. We report the presence of highly divergent lineages of independent origin. At Aldabra Atoll, we uncovered a lineage closely related to the Ligia vitiensis cryptic species complex. Within the inner islands of Cousine, Silhouette, and Mahé we detected the presence of two moderately divergent and geographically disjunct lineages most closely related to Ligia dentipes. Our findings suggest that the Seychelles may harbor at least three novel species of Ligia in need of description and that these species may have originated independently. PMID:29018626

Bundles of Spider Silk, Braided into Sutures, Resist Basic Cyclic Tests: Potential Use for Flexor Tendon Repair

PubMed Central

Hennecke, Kathleen; Redeker, Joern; Kuhbier, Joern W.; Strauss, Sarah; Allmeling, Christina; Kasper, Cornelia; Reimers, Kerstin; Vogt, Peter M.

2013-01-01

Repair success for injuries to the flexor tendon in the hand is often limited by the in vivo behaviour of the suture used for repair. Common problems associated with the choice of suture material include increased risk of infection, foreign body reactions, and inappropriate mechanical responses, particularly decreases in mechanical properties over time. Improved suture materials are therefore needed. As high-performance materials with excellent tensile strength, spider silk fibres are an extremely promising candidate for use in surgical sutures. However, the mechanical behaviour of sutures comprised of individual silk fibres braided together has not been thoroughly investigated. In the present study, we characterise the maximum tensile strength, stress, strain, elastic modulus, and fatigue response of silk sutures produced using different braiding methods to investigate the influence of braiding on the tensile properties of the sutures. The mechanical properties of conventional surgical sutures are also characterised to assess whether silk offers any advantages over conventional suture materials. The results demonstrate that braiding single spider silk fibres together produces strong sutures with excellent fatigue behaviour; the braided silk sutures exhibited tensile strengths comparable to those of conventional sutures and no loss of strength over 1000 fatigue cycles. In addition, the braiding technique had a significant influence on the tensile properties of the braided silk sutures. These results suggest that braided spider silk could be suitable for use as sutures in flexor tendon repair, providing similar tensile behaviour and improved fatigue properties compared with conventional suture materials. PMID:23613793

Regional seismic wave propagation (Lg and Sn) and Pn attenuation in the Arabian Plate and surrounding regions

NASA Astrophysics Data System (ADS)

Al-Damegh, Khaled; Sandvol, Eric; Al-Lazki, Ali; Barazangi, Muawia

2004-05-01

Continuous recordings of 17 broadband and short-period digital seismic stations from a newly established seismological network in Saudi Arabia, along with digital recordings from the broadband stations of the GSN, MEDNET, GEOFON, a temporary array in Saudi Arabia, and temporary short period stations in Oman, were analysed to study the lithospheric structure of the Arabian Plate and surrounding regions. The Arabian Plate is surrounded by a variety of types of plate boundaries: continental collision (Zagros Belt and Bitlis Suture), continental transform (Dead Sea fault system), young seafloor spreading (Red Sea and the Gulf of Aden) and oceanic transform (Owen fracture zone). Also, there are many intraplate Cenozoic processes such as volcanic eruptions, faulting and folding that are taking place. We used this massive waveform database of more than 6200 regional seismograms to map zones of blockage, inefficient and efficient propagation of the Lg and Sn phases in the Middle East and East Africa. We observed Lg blockage across the Bitlis Suture and the Zagros fold and thrust belt, corresponding to the boundary between the Arabian and Eurasian plates. This is probably due to a major lateral change in the Lg crustal waveguide. We also observed inefficient Lg propagation along the Oman mountains. Blockage and inefficient Sn propagation is observed along and for a considerable distance to the east of the Dead Sea fault system and in the northern portion of the Arabian Plate (south of the Bitlis Suture). These mapped zones of high Sn attenuation, moreover, closely coincide with extensive Neogene and Quaternary volcanic activity. We have also carefully mapped the boundaries of the Sn blockage within the Turkish and Iranian plateaus. Furthermore, we observed Sn blockage across the Owen fracture zone and across some segments of the Red Sea. These regions of high Sn attenuation most probably have anomalously hot and possibly thin lithospheric mantle (i.e. mantle lid). A surprising result is the efficient propagation of Sn across a segment of the Red Sea, an indication that active seafloor spreading is not continuous along the axis of the Red Sea. We also investigated the attenuation of Pn phase (QPn) for 1-2 Hz along the Red Sea, the Dead Sea fault system, within the Arabian Shield and in the Arabian Platform. Consistent with the Sn attenuation, we observed low QPn values of 22 and 15 along the western coast of the Arabian Plate and along the Dead Sea fault system, respectively, for a frequency of 1.5 Hz. Higher QPn values of the order of 400 were observed within the Arabian Shield and Platform for the same frequency. Our results based on Sn and Pn observations along the western and northern portions of the Arabian Plate imply the presence of a major anomalously hot and thinned lithosphere in these regions that may be caused by the extensive upper mantle anomaly that appears to span most of East Africa and western Arabia.

Did the Malaysian Main Range record a weak hot Mega Shear?

NASA Astrophysics Data System (ADS)

Sautter, Benjamin; Pubellier, Manuel

2015-04-01

The Main Range of Peninsular Malaysia is a batholith that extends over more than 500km from Malacca in the South to the Thailand border in the North. It results from the subduction/accretion history of the western margin of Sunda Plate by Late Triassic times. We present a structural analysis based on geomorphology, field observations and geochronological data. While most of the basement fabrics are characterized by N-S structures such as granitic plutons, sutures, and folds, a prominent oblique deformation occurred by the End of the Mesozoics synchronous with a widespread thermal anomaly (eg Tioman, Stong, Gunung Jerai, Khanom, Krabi plutons). Morphostructures and drainage anomalies from Digital Elevation Model (SRTM and ASTER), allow us to highlight 2 major groups of penetrative faults in the Central Range Batholith: early NW-SE (5km spaced faults some of which are identified as thrust faults) cross-cut and offset by NNE-SSW dextral normal faults. The regularly spaced NW-SE faults bend toward the flanks of the Batholith and tend to parallel both the Bentong Raub Suture Zone to the East and the strike slip Bok Bak Fault to the West, thus giving the overall fault network the aspect of a large C/S band. Hence, a ductile/brittle behavior can be proposed for the sigmoid faults in the core of the Batholith, whereas the NNE faults are clearly brittle, more linear and are found on the smaller outlying plutons. Radiogenic crystallization ages are homogenous at 190±20Ma (U-Pb Zircon, Tc>1000°C and K-Ar Muscovite, Tc350°C) whereas Zircon fission tracks(Tc=250°C) show specific spatial zoning of the data distribution with ages at 100±10Ma for the outlying plutons and ages at 70±10Ma for the Main Range. We propose a structural mechanism according to which the Main Range would be the ductile core of a Mega-Shear Zone exhumed via transpressive tectonics by the end of Mesozoic Times. A first stage between 100 and 70Ma (Upper Cretaceous) of dextral transpression affected Peninsular Malaysia at a lithospheric scale, accommodated by N-S faults (C planes) such as the Bentong Raub Suture Zone, the Bukit Tinggi fault and the Kledang Fault. This lead to the formation of NW-SE fractures in already exhumed peripheral plutons (< 250°C) and deep level (> 250°C) sigmoid faults (S planes) in the Main range. Later a brittle stage of exhumation occurred in the same system, after 70Ma, leading to NNE-SSW dextral Riedel type faults reactivating pluton flanks, and offsetting older faults as well as quartz dykes. The occurrence of such a structure could be linked to the subduction of the Wharton Ridge at the western margin of Sunda Plate. As a result, a collapse of this hot and thin crust occurred accommodated by LANF's reactivating the basement fabrics including intrusive edges and folds hinges.

Recombinant human bone morphogenetic protein-2 stimulates bone formation during interfrontal suture expansion in rabbits.

PubMed

Liu, Sean Shih-Yao; Xu, Haisong; Sun, Jun; Kontogiorgos, Elias; Whittington, Patrick R; Misner, Kenner G; Kyung, Hee-Moon; Buschang, Peter H; Opperman, Lynne A

2013-08-01

Suture expansion stimulates bone growth to correct craniofacial deficiencies but has a high potential of treatment relapse. The objective of this study was to investigate whether there is a dose-dependent relationship between the recombinant human bone morphogenetic protein-2 (rhBMP-2) and bone formation during suture expansion. Fifty 6-week-old male New Zealand white rabbits were randomly assigned to 5 groups to receive 0 (control), 0.01, 0.025, 0.1, or 0.4 mg/mL of rhBMP-2 delivered by absorbable collagen sponge placed over the interfrontal suture. The suture was expanded for 33 days by 200 g of constant force via a spring anchored with 2 miniscrew implants. Distance of suture expansion, suture volume, and cross-sectional area after expansion were measured using radiographs with bone markers and microcomputed tomography. Suture widths and mineralization appositional rates were calculated based on the widths between bone labels under an epifluorescent microscope. Software (Multilevel Win 2.0; University of Bristol, Bristol, United Kingdom) was used to model distance of suture expansion over time as polynomials to compare group differences. Wilcoxon signed rank tests were performed to compare the suture volume and cross-sectional area, mineral apposition rate, and suture width between groups. The significance level was set at P = 0.05. Whereas the sutures were expanded in all groups, sutures were expanded by significantly greater amounts in the control and the 0.01 mg/mL groups without fusing the sutures than in the 0.025, 0.1, and 0.4 mg/mL groups with fusing sutures. Compared with the controls, the 0.01 mg/mL group showed significantly lower suture volumes, cross-sectional areas, and suture widths after expansion. The mineral apposition rate was significantly higher in the 0.01 mg/mL group than in the controls from days 10 to 30. The 0.01 mg/mL dose of rhBMP-2 delivered by absorbable collagen sponge can stimulate bone formation at the bony edges of the suture during suture expansion; however, higher concentrations cause suture fusion. With an appropriate concentration, rhBMP-2 might facilitate suture expansion for clinical uses. Copyright © 2013 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Argon endolaser suture lysis

NASA Astrophysics Data System (ADS)

Cameron, Bruce D.; Joos, Karen M.; Shen, Jin-Hui

1996-05-01

Purpose: To develop a simple suture lysis technique for post-trabeculectomy examinations under anesthesia since slit lamp laser suture lysis in the clinic cannot be performed on infants and young children. Methods: An argon endolaser probe lysed 10-0 nylon suture through conjunctiva harvested from human cadaver eyes. Since suture lysis failed with the thick Hoskins lens, clear plastic from the suture package compressed the conjunctiva. The conjunctiva was examined histologically. Results: Argon laser suture lysis (250 mW, 0.1 sec, 488 - 514 nm) was achieved without conjunctival damage. Conclusion: The argon endolaser probe is effective for suture lysis when the slit lamp cannot be used.

The effects of morphological irregularity on the mechanical behavior of interdigitated biological sutures under tension.

PubMed

Liu, Lei; Jiang, Yunyao; Boyce, Mary; Ortiz, Christine; Baur, Jeffery; Song, Juha; Li, Yaning

2017-06-14

Irregular interdigitated morphology is prevalent in biological sutures in nature. Suture complexity index has long been recognized as the most important morphological parameter to govern the mechanical properties of biological sutures. However, the suture complexity index alone does not reflect all aspects of suture morphology. The goal of this investigation was to determine that besides suture complexity index, whether the degree of morphological irregularity of biological sutures has influences on the mechanical properties, and if there is any, how to quantify these influences. To explore these issues, theoretical and finite element (FE) suture models with the same suture complexity index but different levels of morphological irregularity were developed. The quasi-static stiffness, strength for damage initiation and post-failure process of irregular sutures were studied. It was shown that for the same suture complexity index, when the level of morphological irregularity increases, the overall strain to failure will increase while tensile stiffness is retained; also, the total energy to fracture increases with a sacrifice in strength to damage initiation. These results reveal that morphological irregularity is another important independent parameter to govern and balance the mechanical properties of biological sutures. Therefore, from the mechanics point of view, the prevalence of irregular suture morphology in nature is a merit, not a defect. Copyright © 2017 Elsevier Ltd. All rights reserved.

Precambrian accretionary history and phanerozoic structures-A unified explanation for the tectonic architecture of the nebraska region, USA

USGS Publications Warehouse

Carlson, M.P.

2007-01-01

The Phanerozoic history in Nebraska and adjacent regions contains many patterns of structure and stratigraphy that can be directly related to the history of the Precambrian basement rocks of the area. A process is proposed that explains the southward growth of North America during the period 1.8-1.6 Ga. A series of families of accretionary events during the Proterozoic emplaced sutures that remained as fundamental basement weak zones. These zones were rejuvenated in response to a variety of continental stress events that occurred during the Phanerozoic. By combining the knowledge of basement history with the history of rejuvenation during the Phanerozoic, both the details of Proterozoic accretionary growth and an explanation for the patterns of Phanerozoic structure and stratigraphy is provided. ?? 2007 The Geological Society of America. All rights reserved.

Evidence of orbital forcing in lake-level fluctuations in the Middle Eocene oil shale-bearing lacustrine successions in the Mudurnu-Göynük Basin, NW Anatolia (Turkey)

NASA Astrophysics Data System (ADS)

Ocakoğlu, F.; Açıkalın, S.; Yılmaz, İ. Ö.; Şafak, Ü.; Gökçeoğlu, C.

2012-08-01

Mudurnu-Göynük basin of the Sakarya Zone in NW Anatolia comprises ca. 1500 m thick Paleocene-Eocene terrestrial to shallow marine succession overlying the Late Cretaceous deeper marine progradational fore-arc sediments. Formed in a foreland setting in relation to southerly situated İzmir-Ankara suture zone, this terrestrial succession (regionally known as Kızılçay group) comprises a thin (<200 m) oil shale-bearing lacustrine section with very good cyclic patterns that potentially serves the quantification of stratigraphy and enlightening the origin of cyclicities of various hierarchy. Our detailed facies analysis on three correlative measured sections showed that mudstone, oil shale and thinner limestone alternations characterize the relatively deeper part of the Eocene lake with probable marine intervention, while thicker limestone, coal, marl and occasional oil shale alternations typify the southern relatively freshwater shoal areas. These facies are frequently organized as meter-scale symmetric to asymmetric transgressive-regressive cycles. Spectral analysis of the mudstone beds and the cycles within the lacustrine succession strongly indicates the occurrence of full bands of Milankovitch with the shortest precession cycle (19 ka) at ca. 2.30 m. Our observations further revealed quite rhythmic thin couplets with estimated durations of 365-730 yr that might represent abrupt climatic changes during deposition. On the other hand, longer duration (ca. 1 Ma) of shoaling and deepening trends in the studied sections were attributed basically to varying subsidence due to tectonic loading in the southerly suture zone. Lastly, regarding the distribution of depositional environments we propose that the oil shale exploration activities should be carried out within a 20 km wide E-W running belt while the southern limits of this belt is more prolific for coal resources.

Tutoring Trainees to Suture: An Alternative Method for Learning How to Suture and a Way to Compensate for a Lack of Suturing Cases.

PubMed

Wongkietkachorn, Apinut; Rhunsiri, Peera; Boonyawong, Pangpoom; Lawanprasert, Attaporn; Tantiphlachiva, Kasaya

2016-01-01

Tutoring in suturing was developed to compensate for a shortage of suturing cases. The objective of this study was to compare ideal suturing score (ISS; 9 points), suturing time (min:sec), and suture placement error (mm) between medical students completing the suturing tutoring program and medical students attending ordinary medical school training program. Participants consisted of 2 groups of medical students who had never performed suturing. The study group had the role of suturing tutor to teach interested high school students. The control group consisted of volunteers from the ordinary medical school program. Skills measurement was performed by having students from both the groups perform 3 vertical mattress sutures on a model. The study group was tested at weeks 1, 9, and 10 to assess improvement. Both the groups were tested at week 10 to compare final learning outcome. There were 41 and 40 participants in the study group and the control group, respectively. ISS was significantly improved in the study group from week 1-week 10 (7.0 ± 1.3 vs. 8.2 ± 0.9, p = 0.01). At week 10, the study group had a higher mean ISS than the control group (8.2 ± 0.9 vs. 7.8 ± 1.1, p = 0.68). Mean suturing time and mean placement error were also lower in the study group at the end of suturing training (5:1 ± 1:0 vs. 5:2 ± 1:2, p = 0.13; 7.4 ± 7.4 vs. 8.0 ± 10.8, p = 0.44). Tutoring trainees to suture can improve a student's ability to learn how to suture. Copyright © 2016 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

Water-tight knee arthrotomy closure: comparison of a novel single bidirectional barbed self-retaining running suture versus conventional interrupted sutures.

PubMed

Nett, Michael; Avelar, Rui; Sheehan, Michael; Cushner, Fred

2011-03-01

Standard medial parapatellar arthrotomies of 10 cadaveric knees were closed with either conventional interrupted absorbable sutures (control group, mean of 19.4 sutures) or a single running knotless bidirectional barbed absorbable suture (experimental group). Water-tightness of the arthrotomy closure was compared by simulating a tense hemarthrosis and measuring arthrotomy leakage over 3 minutes. Mean total leakage was 356 mL and 89 mL in the control and experimental groups, respectively (p = 0.027). Using 8 of the 10 knees (4 closed with control sutures, 4 closed with an experimental suture), a tense hemarthrosis was again created, and iatrogenic suture rupture was performed: a proximal suture was cut at 1 minute; a distal suture was cut at 2 minutes. The impact of suture rupture was compared by measuring total arthrotomy leakage over 3 minutes. Mean total leakage was 601 mL and 174 mL in the control and experimental groups, respectively (p = 0.3). In summary, using a cadaveric model, arthrotomies closed with a single bidirectional barbed running suture were statistically significantly more water-tight than those closed using a standard interrupted technique. The sample size was insufficient to determine whether the two closure techniques differed in leakage volume after suture rupture.

Study of insertion force and deformation for suturing with precurved NiTi guidewire.

PubMed

Wang, Yancheng; Chen, Roland K; Tai, Bruce L; Xu, Kai; Shih, Albert J

2015-04-01

This research presents an experimental study evaluating stomach suturing using a precurved nickel-titanium (NiTi) guidewire for an endoscopic minimally invasive obesity treatment. Precise path planning is critical for accurate and effective suturing. A position measurement system utilizing a hand-held magnetic sensor was used to measure the shape of a precurved guidewire and to determine the radius of curvature before and after suturing. Ex vivo stomach suturing experiments using four different guidewire tip designs varying the radius of curvature and bevel angles were conducted. The changes in radius of curvature and suturing force during suturing were measured. A model was developed to predict the guidewire radius of curvature based on the measured suturing force. Results show that a small bevel angle and a large radius of curvature reduce the suturing force and the combination of small bevel angle and small radius of curvature can maintain the shape of guidewire for accurate suturing.

The history and evolution of sutures in pelvic surgery

PubMed Central

Muffly, Tyler M; Tizzano, Anthony P; Walters, Mark D

2011-01-01

Summary The purpose of the study is to review the history and innovations of sutures used in pelvic surgery. Based on a review of the literature using electronic- and hand-searched databases we identified appropriate articles and gynaecology surgical textbooks regarding suture for wound closure. The first documented uses of suture are explored and then the article focuses on the use of knotted materials in pelvic surgery. The development of suture of natural materials is followed chronologically until the present time where synthetic suture is implanted during countless surgeries every day. This millennial history of suture contains an appreciation of the early work of Susruta, Celsus, Paré and Lister, including a survey of some significant developments of suture methods over the last 100 years. Most surgeons know little about the history and science of sutures. A retrospective view of suture is critical to the appreciation of the current work and development of this common tool. PMID:21357979

The history and evolution of sutures in pelvic surgery.

PubMed

Muffly, Tyler M; Tizzano, Anthony P; Walters, Mark D

2011-03-01

The purpose of the study is to review the history and innovations of sutures used in pelvic surgery. Based on a review of the literature using electronic- and hand-searched databases we identified appropriate articles and gynaecology surgical textbooks regarding suture for wound closure. The first documented uses of suture are explored and then the article focuses on the use of knotted materials in pelvic surgery. The development of suture of natural materials is followed chronologically until the present time where synthetic suture is implanted during countless surgeries every day. This millennial history of suture contains an appreciation of the early work of Susruta, Celsus, Paré and Lister, including a survey of some significant developments of suture methods over the last 100 years. Most surgeons know little about the history and science of sutures. A retrospective view of suture is critical to the appreciation of the current work and development of this common tool.

A cryptic sulfur cycle driven by iron in the methane zone of marine sediment (Aarhus Bay, Denmark)

NASA Astrophysics Data System (ADS)

Holmkvist, Lars; Ferdelman, Timothy G.; Jørgensen, Bo Barker

2011-06-01

Sulfate reduction and sulfur-iron geochemistry were studied in 5-6 m deep gravity cores of Holocene mud from Aarhus Bay (Denmark). A goal was to understand whether sulfate is generated by re-oxidation of sulfide throughout the sulfate and methane zones, which might explain the abundance of active sulfate reducers deep below the main sulfate zone. Sulfate penetrated down to 130 cm where methane started to build up and where the concentration of free sulfide peaked at 5.5 mM. Below this sulfate-methane transition, sulfide diffused downwards to a sulfidization front at 520 cm depth, below which dissolved iron, Fe 2+, accumulated in the pore water. Sulfate reduction rates measured by 35S-tracer incubations in the sulfate zone were high due to high concentrations of reactive organic matter. Within the sulfate-methane transition, sulfate reduction was distinctly stimulated by the anaerobic oxidation of methane. In the methane zone below, sulfate remained at positive "background" concentrations of <0.5 mM down to the sulfidization front. Sulfate reduction decreased steeply to rates which at 300-500 cm depth were 0.2-1 pmol SO 42- cm -3 d -1, i.e., 4-5 orders of magnitude lower than rates measured near the sediment surface. The turn-over time of sulfate increased from 3 years at 12 cm depth to 100-1000 years down in the methane zone. Sulfate reduction in the methane zone accounted for only 0.1% of sulfate reduction in the entire sediment column and was apparently limited by the low pore water concentration of sulfate and the low availability of organic substrates. Amendment of the sediment with both sulfate and organic substrates immediately caused a 10- to 40-fold higher, "potential sulfate reduction" which showed that a physiologically intact community of sulfate reducing bacteria was present. The "background" sulfate concentration appears to be generated from the reaction of downwards diffusing sulfide with deeply buried Fe(III) species, such as poorly-reactive iron oxides or iron bound in reactive silicates. The oxidation of sulfide to sulfate in the sulfidic sediment may involve the formation of elemental sulfur and thiosulfate and their further disproportionation to sulfide and sulfate. The net reaction of sulfide and Fe(III) to form pyrite requires an additional oxidant, irrespective of the formation of sulfate. This could be CO 2 which is reduced with H 2 to methane. The methane subsequently diffuses upwards to become re-oxidized at the sulfate-methane transition and thereby removes excess reducing power and enables the formation of excess sulfate. We show here how the combination of these well-established sulfur-iron-carbon reactions may lead to the deep formation of sulfate and drive a cryptic sulfur cycle. The iron-rich post-glacial sediments underlying Holocene marine mud stimulate the strong sub-surface sulfide reoxidation observed in Aarhus Bay and are a result of the glacial to interglacial history of the Baltic Sea area. Yet, processes similar to the ones described here probably occur widespread in marine sediments, in particular along the ocean margins.

Suture Products and Techniques: What to Use, Where, and Why.

PubMed

Regula, Christie G; Yag-Howard, Cyndi

2015-10-01

There are an increasing number of wound closure materials and suturing techniques described in the dermatologic and surgery literature. A dermatologic surgeon's familiarity with these materials and techniques is important to supplement his or her already established practices and improve surgical outcomes. To perform a thorough literature review of wound closure materials (sutures, tissue adhesives, surgical tape, and staples) and suturing techniques and to outline how and when to use them. A literature review was conducted using PubMed and other online search engines. Keywords searched included suture, tissue adhesive, tissue glue, surgical tape, staples, dermatologic suturing, and suturing techniques. Numerous articles outline the utility of various sutures, surgical adhesives, surgical tape, and staples in dermatologic surgery. In addition, there are various articles describing classic and novel suturing techniques along with their specific uses in cutaneous surgery. Numerous factors must be considered when choosing a wound closure material and suturing technique. These include wound tension, desire for wound edge eversion/inversion, desired hemostasis, repair type, patient's ability to care for the wound and return for suture removal, skin integrity, and wound location. Careful consideration of these factors and proper execution of suturing techniques can lead to excellent cosmetic results.

Suture material in bladder surgery: a comparison of polydioxanone, polyglactin, and chromic catgut.

PubMed

Stewart, D W; Buffington, P J; Wacksman, J

1990-06-01

A comparison of polydioxanone, polyglactin, and chromic catgut suture was performed in 120 rat bladders studying propensity for infection, degree of inflammation, calculogenic potential, changes in urine pH, and suture absorption. None of the sutures predisposed to infection and there was wide variability but no correlation in urine pH. Although initially the polydioxanone incited a greater inflammatory response, by six months all three sutures were similar. The absorption of polydioxanone was slower than chromic catgut suture, but similar to the absorption of polyglactin. There was no significant difference in calculogenic potential between the suture materials tested over a six-month period. Based on this study in rats, polydioxanone suture would appear to be equal to catgut and polyglactin suture in bladder surgery.

Physical and functional comparison of Coated VICRYL* Plus Antibacterial Suture (coated polyglactin 910 suture with triclosan) with Coated VICRYL* Suture (coated polyglactin 910 suture).

PubMed

Storch, Mark; Scalzo, Howard; Van Lue, Stephen; Jacinto, Gabriel

2002-01-01

The goal of this study was to compare the physical and functional properties of coated polyglactin 910 suture with and without triclosan by human assessment and instrument-based measurements. Surgeons specializing in general, orthopedic, plastic, or gynecologic surgery evaluated the suture materials in an in vivo porcine model with regard to (1) ease of passage through tissue, (2) first-throw knot holding, (3) knot tie-down smoothness, (4) knot security, (5) surgical handling, and (6) overall evaluation. Breaking strength retention was determined at 14, 21, 28, and 35 days post-implantation in rats using a tensile strength measurement device. The absorption rate was determined in rats by histopathology at 7, 28, 56, 63, 70, and 77 days post-implantation. The tactile smoothness and tie-down behavior of both wet and dry sutures were evaluated by product characterization technicians. The scores for surgeons' evaluation of suture material were favorable and similar for both sutures. Surgeons could not reliably make a distinction in handling between the two sutures. Breaking strength retention was the same for both sutures, ranging from 79% on day 14 to 5% on day 35. Both sutures were essentially absorbed at 70 days post-implantation. Product characterization assessment of the two sutures found them to be indistinguishable. The addition of triclosan to coated polyglactin 910 sutures did not affect physical handling properties or performance characteristics based on the testing and evaluations performed.

The identification of sympatric cryptic free-living nematode species in the Antarctic intertidal

PubMed Central

Canales-Aguirre, Cristian B.; Nuñez, Daniela; Pérez, Karla; Hernández, Crisitan E.; Brante, Antonio

2017-01-01

The diversity of free-living nematodes in the beaches of two Antarctic islands, King George and Deception islands was investigated. We used morphological and molecular (LSU, and two fragments of SSU sequences) approaches to evaluate 236 nematodes. Specimens were assigned to at least genera using morphology and were assessed for the presence of cryptic speciation. The following genera were identified: Halomonhystera, Litoditis, Enoploides, Chromadorita, Theristus, Oncholaimus, Viscosia, Gammanema, Bathylaimus, Choanolaimus, and Paracanthonchus; along with specimens from the families Anticomidae and Linhomoeidae. Cryptic speciation was identified within the genera Halomonhystera and Litoditis. All of the cryptic species identified live sympatrically. The two cryptic species of Halomonhystera exhibited no significant morphological differences. However, Litoditis species 2 was significantly larger than Litoditis species 1. The utility of molecular data in confirming the identifications of some of the morphologically more challenging families of nematodes was demonstrated. In terms of which molecular sequences to use for the identification of free-living nematodes, the SSU sequences were more variable than the LSU sequences, and thus provided more resolution in the identification of cryptic speciation. Finally, despite the considerable amount of time and effort required to put together genetic and morphological data, the resulting advance in our understanding of diversity and ecology of free-living marine nematodes, makes that effort worthwhile. PMID:28982192

Analysis of Cryptic, Systemic Botrytis Infections in Symptomless Hosts

PubMed Central

Shaw, Michael W.; Emmanuel, Christy J.; Emilda, Deni; Terhem, Razak B.; Shafia, Aminath; Tsamaidi, Dimitra; Emblow, Mark; van Kan, Jan A. L.

2016-01-01

Botrytis species are generally considered to be aggressive, necrotrophic plant pathogens. By contrast to this general perception, however, Botrytis species could frequently be isolated from the interior of multiple tissues in apparently healthy hosts of many species. Infection frequencies reached 50% of samples or more, but were commonly less, and cryptic infections were rare or absent in some plant species. Prevalence varied substantially from year to year and from tissue to tissue, but some host species routinely had high prevalence. The same genotype was found to occur throughout a host, representing mycelial spread. Botrytis cinerea and Botrytis pseudocinerea are the species that most commonly occur as cryptic infections, but phylogenetically distant isolates of Botrytis were also detected, one of which does not correspond to previously described species. Sporulation and visible damage occurred only when infected tissues were stressed, or became mature or senescent. There was no evidence of cryptic infection having a deleterious effect on growth of the host, and prevalence was probably greater in plants grown in high light conditions. Isolates from cryptic infections were often capable of causing disease (to varying extents) when spore suspensions were inoculated onto their own host as well as on distinct host species, arguing against co-adaptation between cryptic isolates and their hosts. These data collectively suggest that several Botrytis species, including the most notorious pathogenic species, exist frequently in cryptic form to an extent that has thus far largely been neglected, and do not need to cause disease on healthy hosts in order to complete their life-cycles. PMID:27242829

Continental underplating after slab break-off

NASA Astrophysics Data System (ADS)

Magni, V.; Allen, M. B.; van Hunen, J.; Bouilhol, P.

2017-09-01

We present three-dimensional numerical models to investigate the dynamics of continental collision, and in particular what happens to the subducted continental lithosphere after oceanic slab break-off. We find that in some scenarios the subducting continental lithosphere underthrusts the overriding plate not immediately after it enters the trench, but after oceanic slab break-off. In this case, the continental plate first subducts with a steep angle and then, after the slab breaks off at depth, it rises back towards the surface and flattens below the overriding plate, forming a thick horizontal layer of continental crust that extends for about 200 km beyond the suture. This type of behaviour depends on the width of the oceanic plate marginal to the collision zone: wide oceanic margins promote continental underplating and marginal back-arc basins; narrow margins do not show such underplating unless a far field force is applied. Our models show that, as the subducted continental lithosphere rises, the mantle wedge progressively migrates away from the suture and the continental crust heats up, reaching temperatures >900 °C. This heating might lead to crustal melting, and resultant magmatism. We observe a sharp peak in the overriding plate rock uplift right after the occurrence of slab break-off. Afterwards, during underplating, the maximum rock uplift is smaller, but the affected area is much wider (up to 350 km). These results can be used to explain the dynamics that led to the present-day crustal configuration of the India-Eurasia collision zone and its consequences for the regional tectonic and magmatic evolution.

Reinterpretation of Paleoproterozoic accretionary boundaries of the north-central United States based on a new aeromagnetic-geologic compilation

USGS Publications Warehouse

Holm, D.K.; Anderson, R.; Boerboom, Terrence; Cannon, W.F.; Chandler, V.; Jirsa, M.; Miller, J.; Schneider, D.A.; Schulz, K.J.; Van Schmus, W. R.

2007-01-01

The Paleoproterozoic crust in the north-central U.S. represents intact juvenile terranes accreted to the rifted Archean Superior craton. A new tectonic province map, based on the interpretation of a new aeromagnetic compilation, published geologic maps, and recent geochronologic data, shows progressive accretion of juvenile arc terranes from ca. 1900-1600 Ma. Contrary to earlier models, geon 18 Penokean-interval crust is primarily confined to a ???2100 Ma tectonic embayment of the rifted Superior craton. The newly defined Spirit Lake tectonic zone, characterized by a sharp magnetic discontinuity that marks the southern limit of Archean and Penokean-interval rocks, is here interpreted to represent an eastern analog of the Cheyenne belt suture zone in southern Wyoming. South of this boundary, geon 17 Yavapai-interval rocks form the basement upon which 1750 Ma rhyolite and succeeding quartzite sequences were deposited. Substantial portions of the Penokean and Yavapai terranes were subsequently deformed during the 1650-1630 Ma Mazatzal orogeny. The northern boundary of the Mazatzal terrane is obscured by abundant 1470-1430 Ma "anorogenic" plutons that stitched the suture with the older Yavapai terrane rocks. These data reveal a progressive tectonic younging to the south as the Laurentian craton grew southward and stabilized during the Proterozoic. Late Mesoproterozoic rift magmatism produced pronounced geophysical anomalies, indicating strong, but localized crustal modification. In comparison to the western U.S., little tectonism has occurred here in the last 1 billion years, providing a uniquely preserved record of the Precambrian evolution of the continental U.S. lithosphere. ?? 2007 Elsevier B.V. All rights reserved.

Usefulness of Irradiated Polyglactin 910 (Vicryl Rapide) for Skin Suturing during Surgery for Lateral Ray Polydactyly of the Toes in Children

PubMed Central

Takeuchi, Masaki

2013-01-01

Background: This study describes the use of a bioabsorbable suture for skin suturing during surgery for lateral ray polydactyly followed by favorable postoperative outcome without the need for postoperative suture removal. Methods: A 5-0 Vicryl Rapide suture was used for skin suturing during surgery for lateral ray polydactyly in 9 children (mean age, 12.4 mo). Children were allowed to walk and bathe 2 weeks after surgery when over-the-suture taping therapy was started. Results: In all cases, the Vicryl Rapide suture disappeared completely within 3 weeks of surgery, and no removal of residual suture was required. No postoperative complications, such as suture abscess, wound dehiscence, or ulcer, were observed. During a mean 24-month postoperative follow-up, no elevation of the interdigital space due to hypertrophic scarring or scar contracture was observed, and no revision surgery was required. Conclusions: Although the breaking strength of Vicryl Rapide declines within the first 10 days after surgery, this property will unlikely lead to postoperative wound dehiscence due to a relatively light load being applied to the lateral toes. The use of a bioabsorbable suture for skin suturing during surgery for lateral lay polydactyly is highly beneficial as it eliminates pain caused by suture removal and the risk of tissue damage while reducing the burden on medical staff. PMID:25289236

BMP9 induces osteogenesis and adipogenesis in the immortalized human cranial suture progenitors from the patent sutures of craniosynostosis patients.

PubMed

Song, Dongzhe; Zhang, Fugui; Reid, Russell R; Ye, Jixing; Wei, Qiang; Liao, Junyi; Zou, Yulong; Fan, Jiaming; Ma, Chao; Hu, Xue; Qu, Xiangyang; Chen, Liqun; Li, Li; Yu, Yichun; Yu, Xinyi; Zhang, Zhicai; Zhao, Chen; Zeng, Zongyue; Zhang, Ruyi; Yan, Shujuan; Wu, Tingting; Wu, Xingye; Shu, Yi; Lei, Jiayan; Li, Yasha; Zhang, Wenwen; Wang, Jia; Lee, Michael J; Wolf, Jennifer Moriatis; Huang, Dingming; He, Tong-Chuan

2017-11-01

The cranial suture complex is a heterogeneous tissue consisting of osteogenic progenitor cells and mesenchymal stem cells (MSCs) from bone marrow and suture mesenchyme. The fusion of cranial sutures is a highly coordinated and tightly regulated process during development. Craniosynostosis is a congenital malformation caused by premature fusion of cranial sutures. While the progenitor cells derived from the cranial suture complex should prove valuable for studying the molecular mechanisms underlying suture development and pathogenic premature suture fusion, primary human cranial suture progenitors (SuPs) have limited life span and gradually lose osteoblastic ability over passages. To overcome technical challenges in maintaining sufficient and long-term culture of SuPs for suture biology studies, we establish and characterize the reversibly immortalized human cranial suture progenitors (iSuPs). Using a reversible immortalization system expressing SV40 T flanked with FRT sites, we demonstrate that primary human suture progenitor cells derived from the patent sutures of craniosynostosis patients can be efficiently immortalized. The iSuPs maintain long-term proliferative activity, express most of the consensus MSC markers and can differentiate into osteogenic and adipogenic lineages upon BMP9 stimulation in vitro and in vivo. The removal of SV40 T antigen by FLP recombinase results in a decrease in cell proliferation and an increase in the endogenous osteogenic and adipogenic capability in the iSuPs. Therefore, the iSuPs should be a valuable resource to study suture development, intramembranous ossification and the pathogenesis of craniosynostosis, as well as to explore cranial bone tissue engineering. © 2017 The Authors. Journal of Cellular and Molecular Medicine published by John Wiley & Sons Ltd and Foundation for Cellular and Molecular Medicine.

Effects of suture position on left ventricular fluid mechanics under mitral valve edge-to-edge repair.

PubMed

Du, Dongxing; Jiang, Song; Wang, Ze; Hu, Yingying; He, Zhaoming

2014-01-01

Mitral valve (MV) edge-to-edge repair (ETER) is a surgical procedure for the correction of mitral valve regurgitation by suturing the free edge of the leaflets. The leaflets are often sutured at three different positions: central, lateral and commissural portions. To study the effects of position of suture on left ventricular (LV) fluid mechanics under mitral valve ETER, a parametric model of MV-LV system during diastole was developed. The distribution and development of vortex and atrio-ventricular pressure under different suture position were investigated. Results show that the MV sutured at central and lateral in ETER creates two vortex rings around two jets, compared with single vortex ring around one jet of the MV sutured at commissure. Smaller total orifices lead to a higher pressure difference across the atrio-ventricular leaflets in diastole. The central suture generates smaller wall shear stresses than the lateral suture, while the commissural suture generated the minimum wall shear stresses in ETER.

Relevance of cryptic fishes in biodiversity assessments: A case study at Buck Island Reef National Monument, St. Croix

USGS Publications Warehouse

Smith-Vaniz, W.F.; Jelks, H.L.; Rocha, L.A.

2006-01-01

Because cryptic fishes are difficult to accurately survey, they are undersampled components of coral reef habitats, and their ecological roles have been generally ignored. Fifty-eight enclosed stations were sampled in shoreline, nearshore reef, lagoon, backreef, forereef, and bank/shelf habitats with an ichthyocide (rotenone) at Buck Island Reef National Monument, St. Croix, U.S. Virgin Islands. Our samples included 55 families and 228 species, 60 previously unreported from St. Croix. Fish assemblages varied across habitat zones with the shoreline assemblage the most distinct. Only 8% of the species were present in all habitats. Multi-dimensional scaling plots of habitat characteristics and Bray-Curtis similarities of fish assemblages revealed similar patterns. Dominant and rare taxa are enumerated for each habitat sampled. Rotenone and visual census data are compared. While visual surveys accumulated more species per unit of effort, rotenone samples accumulated more species by area. Only 36% of the 228 species sampled with rotenone were visually detected, while 70% of the 115 species visually detected were also collected with rotenone. The use of rotenone is controversial but important for obtaining reasonably complete inventories of reef fishes. Misconceptions about rotenone and the advantages and limitations of alternative biodiversity assessment methods are discussed. ?? 2006 Rosenstiel School of Marine and Atmospheric Science of the University of Miami.

Prospective randomized trial of barbed polyglyconate suture to facilitate vesico-urethral anastomosis during robot-assisted radical prostatectomy: time reduction and cost benefit.

PubMed

Zorn, Kevin C; Trinh, Quoc-Dien; Jeldres, Claudio; Schmitges, Jan; Widmer, Hugues; Lattouf, Jean-Baptiste; Sammon, Jesse; Liberman, Dan; Sun, Maxine; Bianchi, Marco; Karakiewicz, Pierre I; Denis, Ronald; Gautam, Gagan; El-Hakim, Assaad

2012-05-01

Study Type - RCT (randomized trial) Level of Evidence 2b. What's known on the subject? and What does the study add? In a previous randomized controlled trial, barbed polyglyconate suture for vesico-urethral anastomosis was associated with more frequent cystogram leaks, longer mean catheterization times and greater suture costs per case. In the current randomized controlled trial, we show that barbed polyglyconate suture is associated with decreased anastomosis time, decreased need to readjust suture tension, cost reduction, and equal continence and early/late urinary complication rates. To examine the effectiveness of barbed polyglyconate suture (V-Loc 180; Covidien, Mansfield, MA, USA) compared with standard monofilament for posterior reconstruction (PR) and vesico-urethral anastomosis (VUA) during robot-assisted radical prostatectomy (RARP). A prospective randomized controlled trial was conducted in 70 consecutive RARP cases by a single surgeon (K.C.Z.). Standard VUA was performed using three 4-0 poliglecaprone 25 (Monocryl; Ethicon Endosurgery, Cincinnati, OH, USA) sutures secured with absorbable suture clips (LapraTy, Ethicon; one single 6-inch [15.2 cm] for PR and two attached 6-inch [15.2 cm] for VUA). Barbed suture VUA was performed using two 3-0 6-inch (15.2 cm) barbed polyglyconate sutures. Time to complete the suture set-up by the nursing team, anastomosis time and need to adjust suture tension were recorded. Suture-related complications, validated-questionnaire continence and cost were also examined.   Compared with a conventional reconstruction technique, there was a significant reduction in mean nurse set-up time (31 vs. 294 s; P < 0.01) and reconstruction time (13.1 vs. 20.8 min; P < 0.01) for the barbed suture technique. Need to readjust suture tension or to place additional suture clips for watertight closure was greater in the standard monofilament group than in the barbed suture group (6% vs. 24%; P= 0.03). •  A cost reduction was recorded at our institution (48.05 vs. 70.25 $CAN) with the barbed suture technique. •  With a mean follow-up of 6.2 months, no delayed anastomotic leak or bladder neck contracture was observed in either group. •  Pad-free continence outcomes for the monofilament suture vs the barbed suture groups at 1 (64 vs. 69%, P= 0.6), 3 (76 vs. 81%, P= 0.5) and 6 months (88 vs. 92%, P= 0.7) were similar. •  Compared with standard monofilament suture, the unidirectional barbed polyglyconate suture appears to provide safe, efficient and cost-effective PR and VUA during RARP. •  Use of the interlocked barbed polyglyconate suture technique prevents slippage, precluding the need for assistance, knot-tying and constant reassessment of anastomosis integrity. © 2012 THE AUTHORS. BJU INTERNATIONAL © 2012 BJU INTERNATIONAL.

Suture cost savings in the OR.

PubMed

Walsh, Susanna S

2012-05-01

Materials management personnel at a health care facility in Baltimore, Maryland, were stocking too much suture. They stocked suture requested by surgeons or recommended by suture company representatives, and, because the facility is a teaching institution, they stocked suture requested by residents. No master suture database was available to determine what was needed and what was not. As a result, some suture was rarely used, which cost the facility money and took up inventory space. In response, I created a list of the existing inventory and coordinated with the specialty surgical service coordinators to determine which suture was typically used and in what quantities. I used this information to create a master list, with the goal of eliminating the purchase of suture that was not on this list. I gave the staff members and surgeons two months to assess the list and determine whether the suggested suture was sufficient for their needs. I then asked the materials management personnel to order and maintain suture stock based on the master list. This process took approximately four months and shows how health care providers can take a high-volume item, such as suture, and create cost-saving processes that will serve surgeons' and patients' needs while reducing costs and streamlining stock. Copyright © 2012 AORN, Inc. Published by Elsevier Inc. All rights reserved.

Analysis of suture anchor eyelet position on suture failure load.

PubMed

Aktay, Sevima A; Kowaleski, Michael P

2011-06-01

To compare mechanical performance of 2 orientations of the 5 mm Corkscrew® suture anchor with #5 Fiberwire® . In vitro biomechanical study. Suture anchor-suture constructs (n=40). Acute and cyclic tensile loads were applied to suture threaded through eyelets of 40 anchors perpendicular to the long axis of the anchor. Eyelets were positioned so that the suture pull was in line with (anchor rotation angle of 0° [ARA 0]) or 90° (ARA 90) to the eyelet plane. Load at failure, stiffness, and cycles to failure were determined. All constructs failed by suture breakage at the eyelet. Mean load at failure was significantly higher in the ARA 90 group (634 ± 93 N) compared with the ARA 0 group (495 ± 52 N; P=.0015). No significant difference was found between groups for mean number of cycles to failure (270 ± 177 versus 178 ± 109; P=.2166) and stiffness (50 ± 4 versus 48 ± 5 N/mm; P=.3141). The Corkscrew® 5 mm suture anchor with Fiberwire® suture fails via suture breakage at the eyelet under higher acute loads if the suture is loaded at an angle of 90° compared with 0° with respect to the plane of the eyelet. © Copyright 2011 by The American College of Veterinary Surgeons.

The role of suture cutout in the failure of meniscal root repair during the early post-operative period: a biomechanical study.

PubMed

Perez-Blanca, Ana; Prado Nóvoa, María; Lombardo Torre, Maximiano; Espejo-Reina, Alejandro; Ezquerro Juanco, Francisco; Espejo-Baena, Alejandro

2018-04-01

To assess the role of suture cutout in the mechanics of failure of the repaired posterior meniscal root during the early post-operative period when using sutures of different shape. Twenty medial porcine menisci were randomized in two groups depending on the suture shape used to repair the posterior root: thread or tape. The sutured menisci were subjected to cyclic loading (1000 cycles, (10, 30) N) followed by load-to-failure testing. Residual displacements, stiffness, and ultimate failure load were determined. During tests, the tissue-suture interface was recorded using a high-resolution camera. In cyclic tests, cutout progression at the suture insertion points was not observed for any specimen of either group and no differences in residual displacements were found between use of thread or tape. In load-to-failure tests, suture cutout started in all menisci at a load close to the ultimate failure and all specimens failed by suture pullout. Suture tape had a greater ultimate load with no other differences. In a porcine model of a repaired posterior meniscal root subjected to cyclic loads representative of current rehabilitation protocols in the early post-operative period under restricted loading conditions, suture cutout was not found as a main source of permanent root displacement when using suture thread or tape. Suture cutout progression started at high loading levels close to the ultimate load of the construct. Tape, with a meniscus-suture contact area larger than thread, produced higher ultimate load.

Cranial suture biology of the Aleutian Island inhabitants.

PubMed

Cray, James; Mooney, Mark P; Siegel, Michael I

2011-04-01

Research on cranial suture biology suggests there is biological and taxonomic information to be garnered from the heritable pattern of suture synostosis. Suture synostosis along with brain growth patterns, diet, and biomechanical forces influence phenotypic variability in cranial vault morphology. This study was designed to determine the pattern of ectocranial suture synostosis in skeletal populations from the Aleutian Islands. We address the hypothesis that ectocranial suture synostosis pattern will differ according to cranial vault shape. Ales Hrdlicka identified two phenotypes in remains excavated from the Aleutian Island. The Paleo-Aleutians, exhibiting a dolichocranic phenotype with little prognathism linked to artifacts distinguished from later inhabitants, Aleutians, who exhibited a brachycranic phenotype with a greater amount of prognathism. A total of 212 crania representing Paleo-Aleuts and Aleutian as defined by Hrdlicka were investigated for suture synostosis pattern following standard methodologies. Comparisons were performed using Guttmann analyses. Results revealed similar suture fusion patterns for the Paleo-Aleut and Aleutian, a strong anterior to posterior pattern of suture fusion for the lateral-anterior suture sites, and a pattern of early termination at the sagittal suture sites for the vault. These patterns were found to differ from that reported in the literature. Because these two populations with distinct cranial shapes exhibit similar patterns of suture synostosis it appears pattern is independent of cranial shape in these populations of Homo sapiens. These findings suggest that suture fusion patterns may be population dependent and that a standardized methodology, using suture fusion to determine age-at-death, may not be applicable to all populations. Copyright © 2011 Wiley-Liss, Inc.

Antibacterial Surgical Silk Sutures Using a High-Performance Slow-Release Carrier Coating System.

PubMed

Chen, Xiaojie; Hou, Dandan; Wang, Lu; Zhang, Qian; Zou, Jiahan; Sun, Gang

2015-10-14

Sutures are a vital part for surgical operation, and suture-associated surgical site infections are an important issue of postoperative care. Antibacterial sutures have been proved to reduce challenging complications caused by bacterial infections. In recent decades, triclosan-free sutures have been on their way to commercialization. Alternative antibacterial substances are becoming relevant to processing surgical suture materials. Most of the antibacterial substances are loaded directly on sutures by dipping or coating methods. The aim of this study was to optimize novel antibacterial braided silk sutures based on levofloxacin hydrochloride and poly(ε-caprolactone) by two different processing sequences, to achieve suture materials with slow-release antibacterial efficacy and ideal physical and handling properties. Silk strands were processed into sutures on a circular braiding machine, and antibacterial treatment was introduced alternatively before or after braiding by two-dipping-two-rolling method (M1 group and M2 group). The antibacterial activity and durability against Staphylococcus aureus and Escherichia coli were tested. Drug release profiles were measured in phosphate buffer with different pH values, and release kinetics model was built to analyze the sustained drug release mechanism between the interface of biomaterials and the in vitro aqueous environment. Knot-pull tensile strength, thread-to-thread friction, and bending stiffness were determined to evaluate physical and handling properties of sutures. All coated sutures showed continuous antibacterial efficacy and slow drug release features for more than 5 days. Besides, treated sutures fulfilled U.S. Pharmacopoeia required knot-pull tensile strength. The thread-to-thread friction and bending stiffness for the M1 group changed slightly when compared with those of uncoated ones. However, physical and handling characteristics of the M2 group tend to approach those of monofilament ones. The novel suture showed acceptable in vitro cytotoxicity according to ISO 10993-5. Generally speaking, all coated sutures show potential in acting as antibacterial suture materials, and M1 group is proved to have a higher prospect for clinical applications.

Metabolism of Cryptic Peptides Derived from Neuropeptide FF Precursors: The Involvement of Insulin-Degrading Enzyme

PubMed Central

Grasso, Giuseppe; Mielczarek, Przemyslaw; Niedziolka, Magdalena; Silberring, Jerzy

2014-01-01

The term “cryptome” refers to the subset of cryptic peptides with bioactivities that are often unpredictable and very different from the parent protein. These cryptic peptides are generated by proteolytic cleavage of proteases, whose identification in vivo can be very challenging. In this work, we show that insulin-degrading enzyme (IDE) is able to degrade specific amino acid sequences present in the neuropeptide pro-NPFFA (NPFF precursor), generating some cryptic peptides that are also observed after incubation with rat brain cortex homogenate. The reported experimental findings support the increasingly accredited hypothesis, according to which, due to its wide substrate selectivity, IDE is involved in a wide variety of physiopathological processes. PMID:25247577

Effects of PDGF-BB delivery from heparinized collagen sutures on the healing of lacerated chicken flexor tendon in vivo.

PubMed

Younesi, Mousa; Knapik, Derrick M; Cumsky, Jameson; Donmez, Baris Ozgur; He, Ping; Islam, Anowarul; Learn, Greg; McClellan, Philip; Bohl, Michael; Gillespie, Robert J; Akkus, Ozan

2017-11-01

Flexor tendon lacerations are traditionally repaired by using non-absorbable monofilament sutures. Recent investigations have explored to improve the healing process by growth factor delivery from the sutures. However, it is difficult to conjugate growth factors to nylon or other synthetic sutures. This study explores the performance of a novel electrochemically aligned collagen suture in a flexor tendon repair model with and without platelet derived growth factor following complete tendon laceration in vivo. Collagen suture was fabricated via electrochemical alignment process. Heparin was covalently bound to electrochemically aligned collagen sutures (ELAS) to facilitate affinity bound delivery of platelet-derived growth factor-BB (PDGF-BB). Complete laceration of the flexor digitorum profundus in the third digit of the foot was performed in 36 skeletally mature White Leghorn chickens. The left foot was used as the positive control. Animals were randomly divided into three groups: control specimens treated with standard nylon suture (n=12), specimens repaired with heparinated ELAS suture without PDGF-BB (n=12) and specimens repaired with heparinated ELAS suture with affinity bound PDGF-BB (n=12). Specimens were harvested at either 4weeks or 12weeks following tendon repair. Differences between groups were evaluated by the degree of gross tendon excursion, failure load/stress, stiffness/modulus, absorbed energy at failure, elongation/strain at failure. Quantitative histological scoring was performed to assess cellularity and vascularity. Closed flexion angle measurements demonstrated no significant differences in tendon excursion between the study groups at 4 or 12weeks. Biomechanical testing showed that the group treated with PDGF-BB bound heparinated ELAS suture had significantly higher stiffness and failure load (p<0.05) at 12-weeks relative to both heparinated ELAS suture and nylon suture. Similarly, the group treated with PDGF-BB bound suture had significantly higher ultimate tensile strength and Young's modulus (p<0.05) at 12-weeks relative to both ELAS suture and nylon suture. Compared to nylon controls, heparinized ELAS with PDGF-BB improved biomechanics and vascularity during tendon healing by 12-weeks following primary repair. The ability of ELAS to deliver PDGF-BB to the lacerated area of tendon presents investigators with a functional bioinductive platform to improve repair outcomes following flexor tendon repair. A high strength aligned collagen suture was fabricated via linear electrocompaction and heparinized for prolonged delivery of PDFG-BB. When it was used to suture a complete lacerated flexor tendon in a chicken model controlled release of the PDGF-BB improved the strength of treated tendon after 12 weeks compared to tendon sutured with commercial nylon suture. Furthermore, Collagen suture with affinity bound PDGF-BB enhanced the vascularization and remodeling of lacerated tendon when it compare to synthetic nylon suture. Overall, electrocompacted collagen sutures holds potential to improve repair outcome in flexor tendon surgeries by improving repair strength and stiffness, vascularity, and remodeling via sustained delivery of the PDGF-BB. The bioinductive collagen suture introduces a platform for sustained delivery of other growth factors for a wide-array of applications. Copyright © 2017 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Investigating the origins of rhythmic major-element zoning in HP/LT garnets from worldwide subduction mélanges

NASA Astrophysics Data System (ADS)

Viete, D. R.; Hacker, B. R.; Seward, G.; Allen, M. B.

2016-12-01

Rhythmic major-element zoning has been documented in garnets from high pressure/low temperature (HP/LT) lenses within a number of worldwide subduction mélanges (e.g. California, Chinese Tianshan, Cuba, Greek Cyclades, Guatemala, Japan, Venezuela). The origin of these features has implications for the nature of subduction-zone processes. Conditions of rhythmic zoning acquirement in HP/LT garnets of California and Venezuela were investigated by use of Raman and FTIR microspectroscopy, and thermodynamic modelling of phase equilibria. Quartz-in-garnet Raman barometry reveals varying P—on the order of 100­-300 MPa, over radial distances of 10s of µm—in association with the high-Mn (and low-Mg) bands that define the fine-scale rhythmic zoning. Results from FTIR microspectroscopy demonstrate association between the high-Mn bands and locally depressed (structural) OH and elevated (molecular) H2O concentrations. The microspectroscopy results suggest changes in P and fluid activity attended development of the cryptic rhythmic zoning. Perple_X modelling of phase equilibria shows that, for specific rock chemistry and subduction P-T conditions, garnet modal abundance is extremely sensitive to changes in P (e.g. 10-20 vol.% growth/dissolution for ΔP = 200 MPa). Rhythmic major-element zoning may reflect P- and/or fluid-driven cycles of garnet stability-instability and/or varying reaction progress/kinetics during subduction. Steep compositional gradients that define the rhythmic major-element zoning limit time scales at subduction T, requiring that such individual stability-instability and/or accelerated reaction cycles were extremely brief. Seismic cycles or porosity waves represent ephemeral phenomena capable of accounting for development of rhythmic major-element zoning in HP/LT garnet, during subduction, as a result of fluctuations in both P and fluids. Metamorphic rocks may well carry detailed records of the catastrophism that punctuates longer-term tectonometamorphic processes.

[Manual suture versus/or mechanical suture from the Austrian viewpoint].

PubMed

Kronberger, L; Germann, R

1987-01-01

A general inquiry was made at surgical units and university clinics in Austria about the anastomosis techniques used between 1980 to 1985. The result was that in 90.3% the suture was made by hand and in 9.7% by machine. The first mentioned was performed as double row inverting suture by 66% of our surgeons, and only in 30% as an all-layer suture. The stapler-technique was mostly preferred for the oesophago-jejunostomy and the high and lower resection of the rectum. A leakage of the suture line was observed in 3.9% after sewing by hand and in 6.3% after stapling. The total lethality finally was 1.4% for hand made suture and 1.8% for apparative suture.

Suture slippage in knotless suture anchors resulting in subacromial-subdeltoid bursitis.

PubMed

Hayeri, Mohammad Reza; Keefe, Daniel T; Chang, Eric Y

2016-05-01

Rotator cuff repair using a suture bridge and knotless suture anchors is a relatively new, but increasingly used technique. The suture bridge technique creates an anatomically similar and more secure rotator cuff repair compared with conventional arthroscopic techniques and the use of knotless anchors eliminates the challenges associated with knot tying during arthroscopic surgery. However, previous in vitro biomechanical tests have shown that the hold of the suture in a knotless suture anchor is far lower than the pullout strength of the anchor from bone. Up until now slippage has been a theoretical concern. We present a prospectively diagnosed case of in vivo suture loosening after rotator cuff repair using a knotless bridge technique resulting in subacromial-subdeltoid bursitis.

Unraveling the history of complex zoned garnets from the North Motagua Mélange (Guatemala)

NASA Astrophysics Data System (ADS)

Barickman, M. H.; Martin, C.; Flores, K. E.; Harlow, G. E.; Bonnet, G.

2016-12-01

The Guatemala Suture Zone (GSZ) is situated in central Guatemala, between the North American and Caribbean plates. Two serpentinite mélanges straddle the Motagua Fault system: the North Motagua Mélange (NMM) and the South Motagua Mélange (SMM). In this study, chemically zoned garnet grains from four eclogite blocks from the NMM were analyzed by EMPA for major elements and LA-ICP-MS for trace elements to unravel the geological history of the eclogites. These eclogites typically consist of euhedral to subhedral garnets, partly retrogressed omphacite grains, and accessory minerals such as phengite and epidote as inclusions in garnet. EBSD was employed to examine apparent garnet inclusions in garnet. The garnet grains in NMM eclogites display complex chemical zonations: all grains roughly show a spessartine-rich core, an almandine-rich core and/or intermediate zone, and a pyrope and grossular-rich rim. Additionally, crystal resorption can be observed between the different zones, and the pyrope-grossular rim can display oscillatory zoning. Finally, grossular-rich zones (crystallographically syntactic) within garnet are present in all studied samples. REE and spider diagrams do not show any significant difference in the patterns of the different zones within the garnet, or indicating that the chemical environment from which each garnet zone grew was broadly the same. The lack of significant variation in LILE content indicates that a fluid influx during garnet growth is unlikely. Consequently, we interpret that garnet grains grew in a largely closed system; however, the presence of the grossular-rich zones, argues for occasional excursions into conditions when either two garnets crystallized or Ca-rich overgrowths that were largely resorbed prior to subsequent continued garnet growth.

Comparison of tensile strength among simple interrupted, cruciate, intradermal, and subdermal suture patterns for incision closure in ex vivo canine skin specimens.

PubMed

Zellner, Eric M; Hedlund, Cheryl S; Kraus, Karl H; Burton, Andrew F; Kieves, Nina R

2016-06-15

OBJECTIVE To compare suture placement time, tension at skin separation and suture line failure, and mode of failure among 4 suture patterns. DESIGN Randomized trial. SAMPLE 60 skin specimens from the pelvic limbs of 30 purpose-bred Beagles. PROCEDURES Skin specimens were harvested within 2 hours after euthanasia and tested within 6 hours after harvest. An 8-cm incision was made in each specimen and sutured with 1 of 4 randomly assigned suture patterns (simple interrupted, cruciate, intradermal, or subdermal). Suture placement time and percentage of skin apposition were evaluated. Specimens were mounted in a calibrated material testing machine and distracted until suture line failure. Tensile strength at skin-edge separation and suture-line failure and mode of failure were compared among the 4 patterns. RESULTS Mean suture placement time for the cruciate pattern was significantly less than that for other patterns. Percentage of skin apposition did not differ among the 4 patterns. Mean tensile strength at skin-edge separation and suture-line failure for the simple interrupted and cruciate patterns were significantly higher than those for the intradermal and subdermal patterns. Mean tensile strength at skin-edge separation and suture-line failure did not differ significantly between the intradermal and subdermal patterns or the simple interrupted and cruciate patterns. The primary mode of failure for the simple interrupted pattern was suture breakage, whereas that for the cruciate, intradermal, and subdermal patterns was tissue failure. CONCLUSIONS AND CLINICAL RELEVANCE Results suggested external skin sutures may be preferred for closure of incisions under tension to reduce risk of dehiscence.

Comparison of Arterial Repair through the Suture, Suture with Fibrin or Cyanoacrylate Adhesive in Ex-Vivo Porcine Aortic Segment

PubMed Central

de Carvalho, Marcus Vinicius H.; Marchi, Evaldo; Lourenço, Edmir Américo

2017-01-01

Introduction Tissue adhesives can be used as adjacent to sutures to drop or avoid bleeding in cardiovascular operations. Objective To verify the efficiency of fibrin and cyanoacrylate adhesive to seal arterial sutures and if the adhesives penetrate through suture line to the inner of arteries. Methods 20 abdominal aorta segments of pigs were divided into two groups according to the adhesive which would be used as adjacent to the suture. In every arterial segment an arteriotomy was done, followed by a conventional artery closure. Afterwards a colloidal fluid was injected inside the arterial segment with a simultaneous intravascular pressure monitoring up to a fluid leakage through the suture. This procedure was repeated after application of one of the adhesives on the suture in order to check if the bursting pressure increases. The inner aorta segments also were analyzed in order to check if there was intraluminal adhesive penetration. Results In Suture 1 group, the mean arterial pressure sustained by the arterial suture reached 86±5.35 mmHg and after the fibrin adhesive application reached 104±11.96 (P<0.002). In the Suture 2 group, the mean arterial pressure sustained by the suture reached 83±2.67 mmHg and after the cyanoacrylate adhesive application reached 152±14.58 mmHg (P<0.002). Intraluminal adhesive penetration has not been noticed. Conclusion There was a significant rise in the bursting pressure when tissue adhesives were used as adjacent to arterial suture, and this rise was higher if the cyanoacrylate adhesive was used. In addition, the adhesives do not penetrate through the suture line into the arteries. PMID:29267611

Risk of Gonadoblastoma Development in Patients with Turner Syndrome with Cryptic Y Chromosome Material.

PubMed

Kwon, Ahreum; Hyun, Sei Eun; Jung, Mo Kyung; Chae, Hyun Wook; Lee, Woo Jung; Kim, Tae Hyuk; Kim, Duk Hee; Kim, Ho-Seong

2017-06-01

Current guidelines recommend that testing for Y chromosome material should be performed only in patients with Turner syndrome harboring a marker chromosome and exhibiting virilization in order to detect individuals who are at high risk of gonadoblastoma. However, cryptic Y chromosome material is suggested to be a risk factor for gonadoblastoma in patients with Turner syndrome. Here, we aimed to estimate the frequency of cryptic Y chromosome material in patients with Turner syndrome and determine whether Y chromosome material increased the risk for development of gonadoblastoma. A total of 124 patients who were diagnosed with Turner syndrome by conventional cytogenetic techniques underwent additional molecular analysis to detect cryptic Y chromosome material. In addition, patients with Turner syndrome harboring Y chromosome cell lines had their ovaries removed prophylactically. Finally, we assessed the occurrence of gonadoblastoma in patients with Turner syndrome. Molecular analysis demonstrated that 10 patients had Y chromosome material among 118 patients without overt Y chromosome (8.5%). Six patients with overt Y chromosome and four patients with cryptic Y chromosome material underwent oophorectomy. Histopathological analysis revealed that the occurrence of gonadoblastoma in the total group was 2.4%, and gonadoblastoma occurred in one of six patients with an overt Y chromosome (16.7%) and 2 of 10 patients with cryptic Y chromosome material (20.0%). The risk of developing gonadoblastoma in patients with cryptic Y chromosome material was similar to that in patients with overt Y chromosome. Therefore, molecular screening for Y chromosome material should be recommended for all patients with Turner syndrome to detect individuals at a high risk of gonadoblastoma and to facilitate proper management of the disease.

Designing small molecules to target cryptic pockets yields both positive and negative allosteric modulators

PubMed Central

Moeder, Katelyn E.; Ho, Chris M. W.; Zimmerman, Maxwell I.; Frederick, Thomas E.; Bowman, Gregory R.

2017-01-01

Allosteric drugs, which bind to proteins in regions other than their main ligand-binding or active sites, make it possible to target proteins considered “undruggable” and to develop new therapies that circumvent existing resistance. Despite growing interest in allosteric drug discovery, rational design is limited by a lack of sufficient structural information about alternative binding sites in proteins. Previously, we used Markov State Models (MSMs) to identify such “cryptic pockets,” and here we describe a method for identifying compounds that bind in these cryptic pockets and modulate enzyme activity. Experimental tests validate our approach by revealing both an inhibitor and two activators of TEM β-lactamase (TEM). To identify hits, a library of compounds is first virtually screened against either the crystal structure of a known cryptic pocket or an ensemble of structures containing the same cryptic pocket that is extracted from an MSM. Hit compounds are then screened experimentally and characterized kinetically in individual assays. We identify three hits, one inhibitor and two activators, demonstrating that screening for binding to allosteric sites can result in both positive and negative modulation. The hit compounds have modest effects on TEM activity, but all have higher affinities than previously identified inhibitors, which bind the same cryptic pocket but were found, by chance, via a computational screen targeting the active site. Site-directed mutagenesis of key contact residues predicted by the docking models is used to confirm that the compounds bind in the cryptic pocket as intended. Because hit compounds are identified from docking against both the crystal structure and structures from the MSM, this platform should prove suitable for many proteins, particularly targets whose crystal structures lack obvious druggable pockets, and for identifying both inhibitory and activating small-molecule modulators. PMID:28570708

Current manufacturing processes of drug-eluting sutures.

PubMed

Champeau, Mathilde; Thomassin, Jean-Michel; Tassaing, Thierry; Jérôme, Christine

2017-11-01

Drug-eluting sutures represent the next generation of surgical sutures since they fulfill their mechanical functions but also deliver the drug in their vicinity after implantation. These implants are produced by a variety of manufacturing processes. Drug-eluting sutures represent the next generation of surgical sutures since they fulfill their mechanical functions but also deliver the drug in their vicinity after implantation. These implants are produced by a variety of manufacturing processes. Two general approaches can be followed: (i) the ones that add the API into the material during the manufacturing process of the suture and (ii) the ones that load the API to an already manufactured suture. Areas covered: This review provides an overview of the current manufacturing processes for drug-eluting suture production and discusses their benefits and drawbacks depending on the type of drugs. The mechanical properties and the drug delivery profile of drug-eluting sutures are highlighted since these implants must fulfill both criteria. Expert opinion: For limited drug contents, melt extrusion and electrospinning are the emerging processes since the drug is added during the suture manufacture process. Advantageously, the drug release profile can be tuned by controlling the processing parameters specific to each process and the composition of the drug-containing polymer. If high drug content is targeted, the coating or grafting of a drug layer on a pre-manufactured suture allows for preservation of the tensile strength requirements of the suture.

Development of a penetration friction apparatus (PFA) to measure the frictional performance of surgical suture.

PubMed

Zhang, Gangqiang; Ren, Tianhui; Lette, Walter; Zeng, Xiangqiong; van der Heide, Emile

2017-10-01

Nowadays there is a wide variety of surgical sutures available in the market. Surgical sutures have different sizes, structures, materials and coatings, whereas they are being used for various surgeries. The frictional performances of surgical sutures have been found to play a vital role in their functionality. The high friction force of surgical sutures in the suturing process may cause inflammation and pain to the person, leading to a longer recovery time, and the second trauma of soft or fragile tissue. Thus, the investigation into the frictional performance of surgical suture is essential. Despite the unquestionable fact, little is actually known on the friction performances of surgical suture-tissue due to the lack of appropriate test equipment. This study presents a new penetration friction apparatus (PFA) that allowed for the evaluation of the friction performances of various surgical needles and sutures during the suturing process, under different contact conditions. It considered the deformation of tissue and can realize the puncture force measurements of surgical needles as well as the friction force of surgical sutures. The developed PFA could accurately evaluate and understand the frictional behaviour of surgical suture-tissue in the simulating clinical conditions. The forces measured by the PFA showed the same trend as that reported in literatures. Copyright © 2017 Elsevier Ltd. All rights reserved.

Timing of ectocranial suture activity in Gorilla gorilla as related to cranial volume and dental eruption

PubMed Central

Cray, James; Cooper, Gregory M; Mooney, Mark P; Siegel, Michael I

2011-01-01

Research has shown that Pan and Homo have similar ectocranial suture synostosis patterns and a similar suture ontogeny (relative timing of suture fusion during the species ontogeny). This ontogeny includes patency during and after neurocranial expansion with a delayed bony response associated with adaptation to biomechanical forces generated by mastication. Here we investigate these relationships for Gorilla by examining the association among ectocranial suture morphology, cranial volume (as a proxy for neurocranial expansion) and dental development (as a proxy for the length of time that it has been masticating hard foods and exerting such strains on the cranial vault) in a large sample of Gorilla gorilla skulls. Two-hundred and fifty-five Gorilla gorilla skulls were examined for ectocranial suture closure status, cranial volume and dental eruption. Regression models were calculated for cranial volumes by suture activity, and Kendall's tau (a non-parametric measure of association) was calculated for dental eruption status by suture activity. Results suggest that, as reported for Pan and Homo, neurocranial expansion precedes suture synostosis activity. Here, Gorilla was shown to have a strong relationship between dental development and suture activity (synostosis). These data are suggestive of suture fusion extending further into ontogeny than brain expansion, similar to Homo and Pan. This finding allows for the possibility that masticatory forces influence ectocranial suture morphology. PMID:21385182

Empirical Evidence Supporting Frequent Cryptic Speciation in Epiphyllous Liverworts: A Case Study of the Cololejeunea lanciloba Complex

PubMed Central

Yu, Ying; Heinrichs, Jochen; Zhu, Rui-Liang; Schneider, Harald

2013-01-01

Cryptic species are frequently recovered in plant lineages, and considered an important cause for divergent of morphological disparity and species diversity. The identification of cryptic species has important implications for the assessment of conservation needs of species aggregates. The mechanisms and processes of the origin of cryptic species diversity are still poorly understand based on the lack of studies especially in context of environment factors. Here we explored evidence for cryptic species within the epiphyllous liverworts Cololejeunea lanciloba complex based on two loci, the plastid trnL-F region and the nuclear ribosomal ITS region. Several analytic approaches were employed to delimit species based on DNA sequence variation including phylogenetic reconstruction, statistical parsimony networks analysis and two recently introduced species delimitation criteria: Rosenberg’s reciprocal monophyly and Rodrigo’s randomly distinct. We found evidence for thirteen genetically distinct putative species, each consisting of more than one haplotype, rather than four morphologically-circumscribed species. The results implied that the highly conserved phenotypes are not congruent with the genetic differentiation, contributing to incorrect assessments of the biodiversity of epiphyllous liverworts. We hypothesize that evolution of cryptic species recovered may be caused by selection of traits critical to the survival in epiphyllous habitats combined with limited developmental options designed in the small body. PMID:24367634

[Biomechanical investigation of the tensile strength of tendon sutures - locking sutures increase stability].

PubMed

Betz, C; Schleicher, P; Winkel, R; Hoffmann, R

2013-02-01

In this study we examined the tensile strength of core sutures of tendons. In particular, we examined the effect of having 2 or 4 stitch strands in the core suture as well as the effect of additional locking sutures on the tensile strength. 60 flexor tendons from the forepaws of freshly slaughtered swines were harvested for biomechanical testing. They were divided into 4 groups (A, B, C and D) of 15 sutures each. Group A: core suture after Zechner with 2 strands; group B: modified core suture with 4 strands; group C: modified core suture with 2 strands and 4 locking sutures; group D: modified core suture with 4 strands and 4 locking sutures. The primary tensile strength of the sutures was measured in Newton using the testing machine with a traction speed of 0.1 mm/s. Simultaneously, the increasing space forming at the suture was filmed against graph paper. Our command variables were force measured in Newton when forming a space of 2 mm as well as the force at which the suture failed. Statistical analysis was carried out with the software SPSS to produce a multivariate analysis with a statistical significance of p<0.05. Results are presented as averages including the 1st and 3rd quartile (1Q/3Q). Under traction to form a 2 mm space, the force measured with group A was 14.2 N (12.9/15.1 N). In group B the force 22.5 N (20.0/24.7 N) was significantly higher (p<0.05). Group C required a traction force of 28.7 N (23.5/35.8 N) which was significantly higher than for groups A and B. Group D required the significantly highest traction force of 42.0 N (39.5/46.0 N) to produce a 2 mm space. The force required for the suture to fail in group A was 19.9 N (17.9/22.8 N), in group B: 26.2 N (24.5/29.7 N), in group C 32.0 N (27.1/40.1 N) and in Group D 46.5 N (41.5/50.0 N); the differences between the gloups were all statistically significant. The primary tensile strength of core sutures after Zechner on flexor tendons from the forepaws of swines was significantly increased by doubling the number of sutures and also by use of 4 additional locking sutures. © Georg Thieme Verlag KG Stuttgart · New York.

Subsurface microbial habitats on Mars

NASA Technical Reports Server (NTRS)

Boston, P. J.; Mckay, C. P.

1991-01-01

We developed scenarios for shallow and deep subsurface cryptic niches for microbial life on Mars. Such habitats could have considerably prolonged the persistence of life on Mars as surface conditions became increasingly inhospitable. The scenarios rely on geothermal hot spots existing below the near or deep subsurface of Mars. Recent advances in the comparatively new field of deep subsurface microbiology have revealed previously unsuspected rich aerobic and anaerobic microbal communities far below the surface of the Earth. Such habitats, protected from the grim surface conditions on Mars, could receive warmth from below and maintain water in its liquid state. In addition, geothermally or volcanically reduced gases percolating from below through a microbiologically active zone could provide the reducing power needed for a closed or semi-closed microbial ecosystem to thrive.

A new Neotibicen cicada subspecies (Hemiptera: Cicadidae) from the southeastern USA forms hybrid zones with a widespread relative despite a divergent male calling song.

PubMed

Marshall, David C; Hill, Kathy B R

2017-05-31

A morphologically cryptic subspecies of Neotibicen similaris (Smith and Grossbeck) is described from forests of the Apalachicola region of the southeastern United States. Although the new form exhibits a highly distinctive male calling song, it hybridizes extensively where it meets populations of the nominate subspecies in parapatry, by which it is nearly surrounded. This is the first reported example of hybridization between North American nonperiodical cicadas. Acoustic and morphological characters are added to the original description of the nominate subspecies, and illustrations of complex hybrid song phenotypes are presented. The biogeography of N. similaris is discussed in light of historical changes in forest composition on the southeastern Coastal Plain.

Management of dislocated intraocular lenses with iris suture.

PubMed

Faria, Mun Y; Ferreira, Nuno P; Canastro, Mario

2017-01-19

Subluxated or malpositioned intraocular lenses (IOLs) and inadequate capsular support is a challenge for every ophthalmic surgeon. Iris suture of an IOL seems to be an easy technique for the management of dislocated 3-piece IOL, allowing the IOL to be placed behind the iris, far from the trabecular meshwork and corneal endothelium. The purpose of this study is to assess the results of pars plana vitrectomy (PPV) and iris suture of dislocated 3-piece acrylic IOLs. In this retrospective, nonrandomized, interventional case consecutive study, of a total of 103 dislocated IOLs, 36 eyes were considered for analysis. All 36 eyes had subluxated or totally luxated 3-piece IOL and underwent iris suture at the Ophthalmology Department of Santa Maria Hospital-North Lisbon Hospital Center, Portugal, from January 2011 until November 2015. All patients underwent 3-port 23-G PPV. The optic zone of the dislocated IOL was placed anterior to the iris with the haptics behind, in the posterior chamber. Haptics were sutured to iris followed by placement of the optics behind iris plane. Postoperative measures included best-corrected visual acuity (BCVA), IOL position, intraocular pressure, pigment dispersion, clinical signs of endothelial cell loss, and development of macular edema. A total of 36 eyes of 36 patients were included. All underwent successful iris fixation of dislocated 3-piece IOL. Mean overall follow-up was 15.9 months (range 3-58 months). At presentation, 16 eyes (44.4%) had a luxated IOL and 20 eyes (55.6%) a subluxated IOL. As underlying cause, 17 eyes (47.2%) had a history of complicated cataract surgery, 5 eyes (13.9%) had a traumatic dislocation of the IOL, and 6 eyes (16.7%) had a previous vitreoretinal surgery. A total of 8 eyes (22.2%) had late spontaneous IOL dislocation after uneventful cataract surgery. The mean preoperative BCVA was 1.09 ± 0.70 logarithm of the minimal angle of resolution (logMAR) units and mean postoperative BCVA was 0.48 ± 0.58 of logMAR units. The mean visual acuity improvement was 4.08 ± 5.33 lines on the logMAR scale. In this study, every IOL was stable at the last follow-up. As late complications, macular edema occurred in 1 patient and retinal detachment occurred in 2 patients. There were no cases of endophthalmitis. Iris suture fixation of subluxated IOL is a good treatment option for eyes with dislocated IOLs, leading to long-term stability of the IOL. The advantage of this procedure is using the same IOL in a closed eye surgery. No astigmatic difference is expected as no large corneal incision is needed.

PREST-plus identifies pedigree errors and cryptic relatedness in the GAW18 sample using genome-wide SNP data.

PubMed

Sun, Lei; Dimitromanolakis, Apostolos

2014-01-01

Pedigree errors and cryptic relatedness often appear in families or population samples collected for genetic studies. If not identified, these issues can lead to either increased false negatives or false positives in both linkage and association analyses. To identify pedigree errors and cryptic relatedness among individuals from the 20 San Antonio Family Studies (SAFS) families and cryptic relatedness among the 157 putatively unrelated individuals, we apply PREST-plus to the genome-wide single-nucleotide polymorphism (SNP) data and analyze estimated identity-by-descent (IBD) distributions for all pairs of genotyped individuals. Based on the given pedigrees alone, PREST-plus identifies the following putative pairs: 1091 full-sib, 162 half-sib, 360 grandparent-grandchild, 2269 avuncular, 2717 first cousin, 402 half-avuncular, 559 half-first cousin, 2 half-sib+first cousin, 957 parent-offspring and 440,546 unrelated. Using the genotype data, PREST-plus detects 7 mis-specified relative pairs, with their IBD estimates clearly deviating from the null expectations, and it identifies 4 cryptic related pairs involving 7 individuals from 6 families.

Triple-loaded single-anchor stitch configurations: an analysis of cyclically loaded suture-tendon interface security.

PubMed

Coons, David A; Barber, F Alan; Herbert, Morley A

2006-11-01

This study evaluated the strength and suture-tendon interface security of different suture configurations from triple-suture-loaded anchors. A juvenile bovine infraspinatus tendon was detached and repaired by use of 4 different suture combinations from 2 suture anchors: 3 simple sutures in each anchor (ThreeVo anchor; Linvatec, Largo, FL); 2 peripheral simple stitches and 1 central horizontal mattress suture passed deeper into the tendon, creating a larger footprint (bigfoot-print anchor); 2 peripheral simple stitches with 1 central horizontal mattress stitch passed through the same holes as the simple sutures (stitch-of-Burns); and 2 simple stitches (TwoVo anchor; Linvatec). The constructs were cyclically loaded between 10 N and 180 N for 3,500 cycles and then destructively tested. The number of cycles required to create a 5-mm gap and a 10-mm gap and the ultimate load to failure and failure mode were recorded. The ThreeVo anchor was strongest and most resistant to cyclic loading (P < .01). The TwoVo anchor was least resistant to cyclic loading. The stitch-of-Burns anchor was more resistant to cyclic loading than both the bigfoot-print anchor and the TwoVo anchor (P < .03). The ThreeVo, stitch-of-Burns, and TwoVo anchors were stronger than the bigfoot-print anchor (P < .05). Three simple sutures in an anchor hold better than two simple sutures. Three simple sutures provide superior suture-tendon security than combinations of one mattress and two simple stitches subjected to cyclic loading. A central mattress stitch placed more medially than two peripheral simple stitches (bigfoot-print anchor) configured to enlarge the tendon-suture footprint was not as resistant to cyclic loading or destructive testing as three simple stitches (ThreeVo anchor). Placing a central mattress stitch more medially than 2 peripheral simple stitches to enlarge the tendon-suture footprint was not as resistant to cyclic loading or destructive testing as 3 simple stitches.

Changes in biomechanical strain and morphology of rat calvarial sutures and bone after Tgf-β3 inhibition of posterior interfrontal suture fusion.

PubMed

Shibazaki-Yorozuya, Reiko; Wang, Qian; Dechow, Paul C; Maki, Koutaro; Opperman, Lynne A

2012-06-01

Craniofacial sutures are bone growth fronts that respond and adapt to biomechanical environments. Little is known of the role sutures play in regulating the skull biomechanical environment during patency and fusion conditions, especially how delayed or premature suture fusion will impact skull biomechanics. Tgf-β3 has been shown to prevent or delay suture fusion over the short term in rat skulls, yet the long-term patency or its consequences in treated sutures is not known. It was therefore hypothesized that Tgf-β3 had a long-term impact to prevent suture fusion and thus alter the skull biomechanics. In this study, collagen gels containing 3 ng Tgf-β3 were surgically placed superficial to the posterior interfrontal suture (IFS) and deep to the periosteum in postnatal day 9 (P9) rats. At P9, P24, and P70, biting forces and strains over left parietal bone, posterior IFS, and sagittal suture were measured with masticatory muscles bilaterally stimulated, after which the rats were sacrificed and suture patency analyzed histologically. Results demonstrated that Tgf-β3 treated sutures showed less fusion over time than control groups, and strain patterns in the skulls of the Tgf-β3-treated group were different from that of the control group. Although bite force increased with age, no alterations in bite force were attributable to Tgf-β3 treatment. These findings suggest that the continued presence of patent sutures can affect strain patterns, perhaps when higher bite forces are present as in adult animals. Copyright © 2012 Wiley Periodicals, Inc.

Lu-Hf isotope constraints on plume-lithosphere interaction during emplacement of the Bushveld Large Igneous Province at 2.06 Ga: Implications for the structure and evolution of the Kaapvaal Craton's lithospheric mantle

NASA Astrophysics Data System (ADS)

Zirakparvar, N. A.; Mathez, E. A.; Rajesh, H.; Vervoort, J. D.; Choe, S.

2016-12-01

The Bushveld Large Igneous Province (B-LIP) comprises a diverse array of >30 magma bodies that intruded the Kaapvaal Craton at 2.06 Ga. In this talk we use zircon and bulk-rock Lu-Hf isotope data to show that the B-LIP formed in response to the arrival of a plume(s) from the deep mantle. New zircon Hf isotope compositions for four B-LIP bodies yield intrusion-specific average ɛHf (2.06 Ga) values that range from -20.7 ± 2.8 to -2.7 ± 2.8, largely consistent with literature zircon data for other B-LIP intrusions. Bulk-rock solution ɛHf (2.06 Ga) values for a variety of B-LIP intrusions range from -2.1 ± 0.2 to -10.6 ± 0.2. Because the most radiogenic Hf isotope compositions across the entire B-LIP are nearly primordial with an ɛHf (2.06 Ga) close to 0, it is likely that the heat source of the B-LIP was a plume(s) from deep mantle. The Hf isotope data further suggests that individual intrusions in the B-LIP can be grouped into four categories based on their ultimate sources: 1) melts generated in subduction and plume modified continental lithospheric mantle; 2) melts generated by melting of a mafic-ultramafic reservoir composed of older ( 2.7 Ga) plume-related material trapped in the Kaapvaal lithosphere; 3) melts generated in the mid- to upper crust; and 4) melts generated from the 2.06 Ga mantle plume itself. The presence of 2.7 Ga mafic-ultramafic material in the Kaapvaal lithosphere may have acted to strengthen the lithosphere so that it was able to resist being dispered by the arrival of the B-LIP plume at 2.06 Ga. Because the B-LIP extends into a 2.7 Ga aged suture zone between the Kaapvaal and Zimbabwe cratons, it is also possible to understand the role of the lithospheric mantle in producing the Lu-Hf signatures observed in the various B-LIP intrusions as a function of two different types of the continental lithosphere: The very old lithosphere comprising the Kaapvaal Craton and the somewhat younger lithosphere comprising the suture zone. A basic observation is that the Hf isotope signature of the plume source is only directly expressed in B-LIP bodies that intruded the suture zone, providing further evidence that the craton was already underlain by thick lithospheric mantle at the time of B-LIP magmatism.

Crustal structure of central Syria: The intracontinental Palmyride mountain belt

NASA Astrophysics Data System (ADS)

Al-Saad, Damen; Sawaf, Tarif; Gebran, Ali; Barazangi, Muawia; Best, John A.; Chaimov, Thomas A.

1992-07-01

Along a 450-km transect across central Syria seismic reflection data, borehole information, potential field data and surface geologic mapping have been combined to examine the crustal structure of the northern Arabian platform beneath Syria. The transect is surrounded by the major plate boundaries of the Middle East, including the Dead Sea transform fault system along the Levantine margin to the west, the Bitlis suture and East Anatolian fault to the north, and the Zagros collisional belt to the northeast and east. Three main tectonic provinces of the northern Arabian platform in Syria are crossed by this transect from south to north: the Rutbah uplift, the Palmyra fold-thrust belt, and the Aleppo plateau. The Rutbah uplift in southern Syria is a broad, domal basement-cored structure with a thick Phanerozoic (mostly Paleozoic) cover of 6-7 km. Isopachs based on well and seismic reflection data indicate that this region was an early Paleozoic depocenter. The Palmyra fold-thrust belt, the northeastern arm of the Syrian Arc, is a northeast-southwest-trending intracontinental mountain belt that acts as a mobile tectonic zone between the relatively stable Rutbah uplift to the south and the less stable Aleppo plateau to the north. Short-wavelength en-echelon folds characterized by relatively steep, faulted southeast flanks dominate in the southwest, most strongly deformed segment of the belt, while a complex system of deeply rooted faults and broad folds characterize the northeastern region, described in this study. The Aleppo plateau lies immediately north of the Palmyride belt, with a combined Paleozoic and Mesozoic sedimentary section that averages 4-5 km in thickness. Although this region appears relatively undeformed on seismic reflection data when compared to Palmyride deformation, a system of near-vertical, probable strike-slip faults crosscut the region in a dominantly northeasterly direction. Gravity and magnetic modeling constrains the deep crustal structure along the transect. The crustal thickness is estimated to be approximately 38 km. Interpretation of the gravity data indicates two different crustal blocks beneath the Rutbah uplift and the Aleppo plateau, and the presence of a crustal-penetrating, high-density body beneath the northeast Palmyrides. The two distinct crustal blocks suggest that they were accreted possibly along a suture zone and/or a major strike-slip fault zone located approximately in the present-day position of the Palmyrides. The age of the accretion is estimated to be Proterozoic or Early Cambrian, based on the observation of a pervasive reflection (interpreted as the Middle Cambrian Burj limestone) in the Rutbah uplift and in the Aleppo plateau and by analogy with the well-mapped Proterozoic sutures of the Arabian shield to the south.

Ultrastructure, Histochemistry, and Mineralization Patterns in the Ecdysial Suture of the Blue Crab, Callinectes sapidus

NASA Astrophysics Data System (ADS)

Priester, Carolina; Dillaman, Richard M.; Gay, D. Mark

2005-12-01

The ecdysial suture is the region of the arthropod exoskeleton that splits to allow the animal to emerge during ecdysis. We examined the morphology and composition of the intermolt and premolt suture of the blue crab using light microscopy and scanning electron microscopy. The suture could not be identified by routine histological techniques; however 3 of 22 fluorescein isothiocyanate-labeled lectins tested (Lens culinaris agglutinin, Vicia faba agglutinin, and Pisum sativum agglutinin) differentiated the suture, binding more intensely to the suture exocuticle and less intensely to the suture endocuticle. Back-scattered electron (BSE) and secondary electron observations of fracture surfaces of intermolt cuticle showed less mineralized regions in the wedge-shaped suture as did BSE analysis of premolt and intermolt resin-embedded cuticle. The prism regions of the suture exocuticle were not calcified. X-ray microanalysis of both the endocuticle and exocuticle demonstrated that the suture was less calcified than the surrounding cuticle with significantly lower magnesium and phosphorus concentrations, potentially making its mineral more soluble. The presence or absence of a glycoprotein in the organic matrix, the extent and composition of the mineral deposited, and the thickness of the cuticle all likely contribute to the suture being removed by molting fluid, thereby ensuring successful ecdysis.

Comparative histology of some craniofacial sutures and skull-base synchondroses in non-avian dinosaurs and their extant phylogenetic bracket.

PubMed

Bailleul, Alida M; Horner, John R

2016-08-01

Sutures and synchondroses, the fibrous and cartilaginous articulations found in the skulls of vertebrates, have been studied for many biological applications at the morphological scale. However, little is known about these articulations at the microscopic scale in non-mammalian vertebrates, including extant archosaurs (birds and crocodilians). The major goals of this paper were to: (i) document the microstructure of some sutures and synchondroses through ontogeny in archosaurs; (ii) compare these microstructures with previously published sutural histology (i.e. that of mammals); and (iii) document how these articulations with different morphological degrees of closure (open or obliterated) appear histologically. This was performed with histological analyses of skulls of emus, American alligators, a fossil crocodilian and ornithischian dinosaurs (hadrosaurids, pachycephalosaurids and ceratopsids). Emus and mammals possess a sutural periosteum until sutural fusion, but it disappears rapidly during ontogeny in American alligators. This study identified seven types of sutural mineralized tissues in extant and extinct archosaurs and grouped them into four categories: periosteal tissues; acellular tissues; fibrous tissues; and intratendinous tissues. Due to the presence of a periosteum in their sutures, emus and mammals possess periosteal tissues at their sutural borders. The mineralized sutural tissues of crocodilians and ornithischian dinosaurs are more variable and can also develop via a form of necrosis for acellular tissues and metaplasia for fibrous and intratendinous tissues. It was hypothesized that non-avian dinosaurs, like the American alligator, lacked a sutural periosteum and that their primary mode of ossification involved the direct mineralization of craniofacial sutures (instead of intramembranous ossification found in mammals and birds). However, we keep in mind that a bird-like sutural microstructure might have arisen within non-avian saurichians. While synchondroseal histology is relatively similar in archosaurs and mammals, the microstructural differences between the sutures of these two clades are undeniable. Moreover, the current results suggest that the degree of sutural closure can only accurately be known via microstructural analyses. This study sheds light on the microstructure and growth of archosaurian sutures and synchondroses, and reveals a unique, undocumented histological diversity in non-avian dinosaur skulls. © 2016 Anatomical Society.

An Anatomic and Biomechanical Comparison of Bankart Repair Configurations.

PubMed

Judson, Christopher H; Voss, Andreas; Obopilwe, Elifho; Dyrna, Felix; Arciero, Robert A; Shea, Kevin P

2017-11-01

Suture anchor repair for anterior shoulder instability can be performed using a number of different repair techniques, but none has been proven superior in terms of anatomic and biomechanical properties. Purpose/Hypothesis: The purpose was to compare the anatomic footprint coverage and biomechanical characteristics of 4 different Bankart repair techniques: (1) single row with simple sutures, (2) single row with horizontal mattress sutures, (3) double row with sutures, and (4) double row with labral tape. The hypotheses were as follows: (1) double-row techniques would improve the footprint coverage and biomechanical properties compared with single-row techniques, (2) horizontal mattress sutures would increase the footprint coverage compared with simple sutures, and (3) repair techniques with labral tape and sutures would not show different biomechanical properties. Controlled laboratory study. Twenty-four fresh-frozen cadaveric specimens were dissected. The native labrum was removed and the footprint marked and measured. Repair for each of the 4 groups was performed, and the uncovered footprint was measured using a 3-dimensional digitizer. The strength of the repair sites was assessed using a servohydraulic testing machine and a digital video system to record load to failure, cyclic displacement, and stiffness. The double-row repair techniques with sutures and labral tape covered 73.4% and 77.0% of the footprint, respectively. These percentages were significantly higher than the footprint coverage achieved by single-row repair techniques using simple sutures (38.1%) and horizontal mattress sutures (32.8%) ( P < .001). The footprint coverage of the simple suture and horizontal mattress suture groups was not significantly different ( P = .44). There were no significant differences in load to failure, cyclic displacement, or stiffness between the single-row and double-row groups or between the simple suture and horizontal mattress suture techniques. Likewise, there was no difference in the biomechanical properties of the double-row repair techniques with sutures versus labral tape. Double-row repair techniques provided better coverage of the native footprint of the labrum but did not provide superior biomechanical properties compared with single-row repair techniques. There was no difference in footprint coverage or biomechanical strength between the simple suture and horizontal mattress suture repair techniques. Although the double-row repair techniques had no difference in initial strength, they may improve healing in high-risk patients by improving the footprint coverage.

Horizontal Running Mattress Suture Modified with Intermittent Simple Loops

PubMed Central

Chacon, Anna H; Shiman, Michael I; Strozier, Narissa; Zaiac, Martin N

2013-01-01

Using the combination of a horizontal running mattress suture with intermittent loops achieves both good eversion with the horizontal running mattress plus the ease of removal of the simple loops. This combination technique also avoids the characteristic railroad track marks that result from prolonged non-absorbable suture retention. The unique feature of our technique is the incorporation of one simple running suture after every two runs of the horizontal running mattress suture. To demonstrate its utility, we used the suturing technique on several patients and analyzed the cosmetic outcome with post-operative photographs in comparison to other suturing techniques. In summary, the combination of running horizontal mattress suture with simple intermittent loops demonstrates functional and cosmetic benefits that can be readily taught, comprehended, and employed, leading to desirable aesthetic results and wound edge eversion. PMID:23723610

Mechanics of Suture Joints

NASA Astrophysics Data System (ADS)

Li, Yaning; Song, Juha; Ortiz, Christine; Boyce, Mary; Ortiz Group/DMSE/MIT Team; Boyce Group/ME/MIT Team

2011-03-01

Biological sutures are joints which connect two stiff skeletal or skeletal-like components. These joints possess a wavy geometry with a thin organic layer providing adhesion. Examples of biological sutures include mammalian skulls, the pelvic assembly of the armored fish Gasterosteus aculeatus (the three-spined stickleback), and the suture joints in the shell of the red-eared slider turtle. Biological sutures allow for movement and compliance, control stress concentrations, transmit loads, reduce fatigue stress and absorb energy. In this investigation, the mechanics of the role of suture geometry in providing a naturally optimized joint is explored. In particular, analytical and numerical micromechanical models of the suture joint are constructed. The anisotropic mechanical stiffness and strength are studied as a function of suture wavelength, amplitude and the material properties of the skeletal and organic components, revealing key insights into the optimized nature of these ubiquitous natural joints.

Peer-assisted teaching of basic surgical skills.

PubMed

Preece, Ryan; Dickinson, Emily Clare; Sherif, Mohamed; Ibrahim, Yousef; Ninan, Ann Susan; Aildasani, Laxmi; Ahmed, Sartaj; Smith, Philip

2015-01-01

Basic surgical skills training is rarely emphasised in undergraduate medical curricula. However, the provision of skills tutorials requires significant commitment from time-constrained surgical faculty. We aimed to determine how a peer-assisted suturing workshop could enhance surgical skills competency among medical students and enthuse them towards a career in surgery. Senior student tutors delivered two suturing workshops to second- and third- year medical students. Suturing performance was assessed before and after teaching in a 10-min suturing exercise (variables measured included number of sutures completed, suture tension, and inter-suture distance). Following the workshop, students completed a questionnaire assessing the effect of the workshop on their suturing technique and their intention to pursue a surgical career. Thirty-five students attended. Eighty-one percent believed their medical school course provided insufficient basic surgical skills training. The mean number of sutures completed post-teaching increased significantly (p < 0.001), and the standard deviation of mean inter-suture distance halved from ± 4.7 mm pre-teaching, to ± 2.6 mm post-teaching. All students found the teaching environment to be relaxed, and all felt the workshop helped to improve their suturing technique and confidence; 87% found the peer-taught workshop had increased their desire to undertake a career in surgery. Peer-assisted learning suturing workshops can enhance medical students' competence with surgical skills and inspire them towards a career in surgery. With very little staff faculty contribution, it is a cheap and sustainable way to ensure ongoing undergraduate surgical skills exposure.

Timing of ectocranial suture activity in Gorilla gorilla as related to cranial volume and dental eruption.

PubMed

Cray, James; Cooper, Gregory M; Mooney, Mark P; Siegel, Michael I

2011-05-01

Research has shown that Pan and Homo have similar ectocranial suture synostosis patterns and a similar suture ontogeny (relative timing of suture fusion during the species ontogeny). This ontogeny includes patency during and after neurocranial expansion with a delayed bony response associated with adaptation to biomechanical forces generated by mastication. Here we investigate these relationships for Gorilla by examining the association among ectocranial suture morphology, cranial volume (as a proxy for neurocranial expansion) and dental development (as a proxy for the length of time that it has been masticating hard foods and exerting such strains on the cranial vault) in a large sample of Gorilla gorilla skulls. Two-hundred and fifty-five Gorilla gorilla skulls were examined for ectocranial suture closure status, cranial volume and dental eruption. Regression models were calculated for cranial volumes by suture activity, and Kendall's tau (a non-parametric measure of association) was calculated for dental eruption status by suture activity. Results suggest that, as reported for Pan and Homo, neurocranial expansion precedes suture synostosis activity. Here, Gorilla was shown to have a strong relationship between dental development and suture activity (synostosis). These data are suggestive of suture fusion extending further into ontogeny than brain expansion, similar to Homo and Pan. This finding allows for the possibility that masticatory forces influence ectocranial suture morphology. © 2011 The Authors. Journal of Anatomy © 2011 Anatomical Society of Great Britain and Ireland.

Role of the Western Anatolia Shear Zone (WASZ) in Neotectonics Evolution of the Western Anatolia Extended Terrain, Turkey

NASA Astrophysics Data System (ADS)

Cemen, I.; Gogus, O. H.; Hancer, M.

2013-12-01

The Neotectonics period in western Anatolia Extended Terrain, Turkey (WAET) may have initiated in late Oligocene following the Eocene Alpine collision which produced the Izmir-Ankara suture zone. The Western Anatolia Shear Zone (WASZ) bounds the WAET to the east. The shear zone contains mostly normal faults in the vicinity of the Gulf of Gokova. However, its movement is mostly oblique slip from the vicinity of Tavas towards the Lake of Acigol where it makes a northward bend and possibly joins the Eskisehir fault zone to the north of the town of Afyon. The shear zone forms the southern and eastern margins of the Kale-Tavas, Denizli and Acigol basins. The shear zone is similar in its structural/tectonics setting to the Eastern California Shear zone (ECSZ) of the Basins and Ranges of North America Extended terrain which is also composed of many normal to oblique-slip faults and separates two extended terrains with different rates of extension. Western Anatolia experienced many devastating earthquakes within the last 2000 years. Many of the ancient Greek/Roman city states, including Ephesus, Troy, and Hierapolis were destroyed by large historical earthquakes. During the second half of the 20th century, the region experienced two major large earthquake giving normal fault focal mechanism solutions. They are the 1969, M=6.9 Alasehir and the 1970, M=7.1 Gediz earthquakes. These earthquakes had caused substantial damage and loss of life in the region. Therefore, a comprehensive understanding of the kinematics of the Cenozoic extensional tectonics and earthquake potential of the WASZ in the region, is very important, especially since the fault zone is very close to the major towns in eastern part of western Turkey, such as Mugla, Denizli, Sandikli, Dinar and Afyon.

The Vardar zone as a suture for the Mirdita ophiolites, Albania: Constraints from the structural analysis of the Korabi-Pelagonia zone

NASA Astrophysics Data System (ADS)

Tremblay, Alain; Meshi, Avni; Deschamps, Thomas; Goulet, François; Goulet, Normand

2015-02-01

The Dinarides-Hellenides result from underthrusting of the Adriatic margin during Africa-Europe convergence. In Albania, they consist of (1) a western zone of nappes derived from Adria; (2) a central belt made up of the Mirdita ophiolites; and (3) an eastern zone, the Korabi-Pelagonia zone, of Variscan basement overlain by Permian to Mesozoic rift deposits and carbonates. Some authors interpret the Korabi-Pelagonia zone as a microcontinent between the Mirdita-Pindos oceanic basin to the west and the eastern Vardar oceanic basin to the east; other regard the Korabi-Pelagonia zone as a tectonic window below a single ophiolitic nappe. This contribution argues for a far-traveled thrust sheet. The Mirdita ophiolites are 165-160 Ma. The metamorphic sole yielded 40Ar/39Ar ages of 171 to 162 Ma. The Korabi-Pelagonia zone is subdivided into the Korabi and Gjegjan subzones. The structural analysis of these rocks supports the rooting of the Mirdita ophiolites in the Western Vardar zone. The post-Variscan cover sequence of the Korabi subzone records two phases of deformation: D1 is associated with a SE dipping to flat-lying schistosity axial planar to NW verging folds and thrust faults, related to ophiolite obduction; D2 is a postobduction NNE trending crenulation cleavage. Published zircon fission track analyses yielded 150-125 Ma, suggesting that regional metamorphism is Early Cretaceous or older. K-Ar mica ages from correlative rocks of Macedonia cluster between 148 and 130 Ma, indicating that D1 is Late Jurassic. A west directed obduction is favored, as is a rooting east of the Mirdita ophiolites because of the top-to-the-west structural polarity of obduction-related deformation.

The Galicia-Ossa-Morena Zone: Proposal for a new zone of the Iberian Massif. Variscan implications

NASA Astrophysics Data System (ADS)

Arenas, Ricardo; Díez Fernández, Rubén; Rubio Pascual, Francisco J.; Sánchez Martínez, Sonia; Martín Parra, Luis Miguel; Matas, Jerónimo; González del Tánago, José; Jiménez-Díaz, Alberto; Fuenlabrada, Jose M.; Andonaegui, Pilar; Garcia-Casco, Antonio

2016-06-01

Correlation of a group of allochthonous terranes (referred to as basal, ophiolitic and upper units) exposed in the NW and SW of the Iberian Massif, is used to propose a new geotectonic zone in the southern branch of the Variscan Orogen: the Galicia-Ossa-Morena Zone. Recent advances in SW Iberia identify most of the former Ossa-Morena Zone as another allochthonous complex of the Iberian Massif, the Ossa-Morena Complex, equivalent to the Cabo Ortegal, Órdenes, Malpica-Tui, Bragança and Morais complexes described in NW Iberia. The new geotectonic zone and its counterparts along the rest of the Variscan Orogen constitute an Internal Variscan Zone with ophiolites and units affected by high-P metamorphism. The Galicia-Ossa-Morena Zone includes a Variscan suture and pieces of continental crust bearing the imprint of Ediacaran-Cambrian events related to the activity of peri-Gondwanan magmatic arcs (Cadomian orogenesis). In the Iberian Massif, the general structure of this geotectonic zone represents a duplication of the Gondwanan platform, the outboard sections being juxtaposed on top of domains located closer to the mainland before amalgamation. This interpretation offers an explanation that overcomes some issues regarding the differences between the stratigraphic and paleontological record of the central and southern sections of the Iberian Massif. Also, equivalent structural relationships between other major geotectonic domains of the rest of the Variscan Orogen are consistent with our interpretation and allow suspecting similar configurations along strike of the orogen. A number of issues may be put forward in this respect that potentially open new lines of thinking about the architecture of the Variscan Orogen.

[Application of inner figure-of-eight suture to laparoscopic colorectal surgery].

PubMed

Chen, Jianjun; Zhong, Ming

2018-03-25

Regardless of laparoscopic or open colorectal surgeries, intestinal anastomosis is usually an important operative procedure. Even if stapler is widely used in different intestinal surgery nowadays, hand sewn suture is an indispensable procedure in clinical practice, meanwhile after stapled anastomosis, additional hand sewn suture is usually performed to ensure the safety of anastomosis. The inner figure-of-eight suture is a single layer suture technique which has been widely used in skin, tendon, rectus and uterus for quick and secure approximation. We describe our innovative application of inner figure-of-eight suture technique for intestinal anastomosis and/or reinforcement after stapled anastomosis in laparoscopic colorectal surgery. Main steps of inner figure-of-eight suture for intestinal anastomosis on posterior wall are as follows: (1) At 4 mm from cut edge of bowel, needle enters vertically from one side and courses mucosa-serosa-opposite serosa-mucosa in parallel to the entry point. (2) The needle is brought back to first entry side of bowel at 45 degree to enter the mucosa 5 mm below the first entry point and out on opposite side mucosa horizontally. (3) Both lose ends of the suture are pulled to approximate bowel edges and knots are tied on mucosal surface, in which suture line presents figure-of-eight on mucosal surface and two parallel suture lines are seen on serosal surface. When inner figure-of-eight suture is performed on anterior wall, the procedure is similar, but needle passes from serosa-mucosa-opposite mucosa-serosa and repeated to complete the inner figure-8 suture and knots are tied on serosa. The final look is two parallel sutures at 0.5 mm in between and the figure-of-eight remains inside the lumen. We did not deliberately try to invert the bowel edges, and if anastomosis is not satisfactory at final examination, simple interrupted seromuscular suture can be carried out. From 2015 till now, we have successfully completed inner figure-of-eight sutures in 38 cases receiving intestinal anastomosis reinforcement procedure and in 24 cases receiving hand sewn anastomosis. Comparison study revealed inner figure-of-eight suture presented shorter anastomotic time and less medical cost without anastomotic leakage, stump leakage or bleeding. No anastomotic stenosis was found at enteroscopy examination during follow up. We think that inner figure-of-eight suture possesses safe and simple advantages and is a manual suture technique worthy of promotion.

High-resolution imaging of craniofacial sutures: new tools for understanding the origins of craniosynostoses.

PubMed

Khonsari, R H; Di Rocco, F; Arnaud, E; Sanchez, S; Tafforeau, P

2012-09-01

The developmental genetics and the biomechanics of sutures are well-studied topics, while their microanatomy is still imperfectly known. Here, we aim to investigate the structure of skull vault sutures using a high-resolution imaging device. We used synchrotron X-ray microtomography in order to obtain high-resolution images of skull vault sutures from an extant mammal (the mouse Mus musculus) and from an extinct fish (the placoderm Compagopiscis croucheri). We used segmentation and 3D reconstruction softwares in order to reveal the microanatomy of sutures in these species. The high-resolution images allowed us to study the distribution of osteocytes, the organisation of vascular canals, the shapes of the suture borders, the insertion of Sharpey's fibres, the bone growth lines and the structure of the soft tissues surrounding the sutures. Synchrotron imaging provides new perspectives for the study of the normal microanatomy of sutures. The submicronic resolution of the synchrotron scans gives access to the 3D organisation of structures that were previously only known in 2D, even in normal sutures. The description of anatomical entities such as vascular canals and Sharpey's fibres in abnormally fused sutures would be of interest in the understanding of craniosynostoses.

Development and characterisation of silver-doped bioactive glass-coated sutures for tissue engineering and wound healing applications.

PubMed

Blaker, J J; Nazhat, S N; Boccaccini, A R

2004-01-01

A novel silver-doped bioactive glass powder (AgBG) was used to coat resorbable Vicryl (polyglactin 910) and non-resorbable Mersilk surgical sutures, thereby imparting bioactive, antimicrobial and bactericidal properties to the sutures. Stable and homogeneous coatings on the surface of the sutures were achieved using an optimised aqueous slurry-dipping technique. Dynamic mechanical analysis (DMA) was used to investigate the viscoelastic parameters of storage modulus and tandelta and thermal transitions of the as-received and composite (coated) sutures. The results generally showed that the bioactive glass coating did not affect the dynamic mechanical and thermal properties of the sutures. The in vitro bioactivity of the sutures was tested by immersion in simulated body fluid (SBF). After only 3 days of immersion in SBF, bonelike hydroxyapatite formed on the coated suture surfaces, indicating their enhanced bioactive behaviour. Resorbable sutures with bioactive coatings as fabricated here, in conjunction with 3-D textile technology, may provide attractive materials for producing 3-D scaffolds with controlled porosities for tissue engineering applications. The bactericidal properties imparted by the Ag-containing glass coating open also new opportunities for use of the composite sutures in wound healing and body wall repair.

[Mechanical suture in colorectal surgery].

PubMed

Alecu, L; Pascu, A; Costan, I; Deacu, A; Marin, A; Corodeanu, G; Gulinescu, L

2001-01-01

Of this work was the study of using, as well as the utility of the mechanical sutures in colorectal surgery; because of the special caution needed to be taken for any colonic or rectal suture, more than any other digestive segment. The frequency of the postoperative fistulas after the suture and anastomosis is higher at this level and so it increases the period and costs of the hospitalization. We studied the possibilities of performing and evolution of 64 mechanical sutures for 19 patients, with colorectal pathology, hospitalized in our department from july 1999 to december 2000. We performed 64 mechanical sutures, as followed: 47 in open surgery and 17 in laparoscopic. From all these, 56 was bowel sutures, 8 of them were vascular (in laparoscopic, for cutting the most important vascular pedicles). We did 18 anastomosis: 15 in open and 3 in laparoscopic surgery. It was 2 postoperative fistulas from all 56 intestinal sutures (3.57%). We haven't any intra or postoperative bleeding from the vascular anastomosis. It was 3 intraoperative bleeding from the intestinal anastomosis, and only 1 case of postoperative bleeding (5.26% of the cases: 1.56% of all mechanical sutures). In only one case, the mechanical suture couldn't be initially done, but it succeeded after the removing of the segment of the bowel involved. Mechanical sutures offers a high level of safety to the colorectal anastomosis. It provides a very good vascularization to the anastomosis and decreases the time needed for performing the suture or anastomosis, versus manual sature. Also, for the patients with rectal ampular neoplasm, it creates the possibility of anal sphincter preservation by making a low colorectal anastomoses--which is difficult by manual suture.

Shear lag sutures: Improved suture repair through the use of adhesives

PubMed Central

Linderman, Stephen W.; Kormpakis, Ioannis; Gelberman, Richard H.; Birman, Victor; Wegst, Ulrike G. K.; Genin, Guy M.; Thomopoulos, Stavros

2015-01-01

Suture materials and surgical knot tying techniques have improved dramatically since their first use over five millennia ago. However, the approach remains limited by the ability of the suture to transfer load to tissue at suture anchor points. Here, we predict that adhesive-coated sutures can improve mechanical load transfer beyond the range of performance of existing suture methods, thereby strengthening repairs and decreasing the risk of failure. The mechanical properties of suitable adhesives were identified using a shear lag model. Examination of the design space for an optimal adhesive demonstrated requirements for strong adhesion and low stiffness to maximize the strength of the adhesive-coated suture repair construct. To experimentally assess the model, we evaluated single strands of sutures coated with highly flexible cyanoacrylates (Loctite 4903 and 4902), cyanoacrylate (Loctite QuickTite Instant Adhesive Gel), rubber cement, rubber/gasket adhesive (1300 Scotch-Weld Neoprene High Performance Rubber & Gasket Adhesive), an albumin-glutaraldehyde adhesive (BioGlue), or poly(dopamine). As a clinically relevant proof-of-concept, cyanoacrylate-coated sutures were then used to perform a clinically relevant flexor digitorum tendon repair in cadaver tissue. The repair performed with adhesive-coated suture had significantly higher strength compared to the standard repair without adhesive. Notably, cyanoacrylate provides strong adhesion with high stiffness and brittle behavior, and is therefore not an ideal adhesive for enhancing suture repair. Nevertheless, the improvement in repair properties in a clinically relevant setting, even using a non-ideal adhesive, demonstrates the potential for the proposed approach to improve outcomes for treatments requiring suture fixation. Further study is necessary to develop a strongly adherent, compliant adhesive within the optimal design space described by the model. PMID:26022966

Gastric full-thickness suturing during EMR and for treatment of gastric-wall defects (with video).

PubMed

von Renteln, Daniel; Schmidt, Arthur; Riecken, Bettina; Caca, Karel

2008-04-01

The endoscopic full-thickness Plicator device was initially developed to provide an endoscopic treatment option for patients with GERD. Because the endoscopic full-thickness Plicator enables rapid and easy placement of transmural sutures, comparable with surgical sutures, we used the Plicator device for endoscopic treatment or prevention of GI-wall defects. To describe the outcomes and complications of endoscopic full-thickness suturing during EMR and for the treatment of gastric-wall defects. A report of 4 cases treated with the endoscopic full-thickness suturing between June 2006 and April 2007. A large tertiary-referral center. Four subjects received endoscopic full-thickness suturing. The subjects were women, with a mean age of 67 years. Of the 4 subjects, 3 received endoscopic full-thickness suturing during or after an EMR. One subject received endoscopic full-thickness suturing for treatment of a fistula. Primary outcome measurements were clinical procedural success and procedure-related adverse events. The mean time for endoscopic full-thickness suturing was 15 minutes. In all cases, GI-wall patency was restored or ensured, and no procedure-related complications occurred. All subjects responded well to endoscopic full-thickness suturing. The resection of one GI stromal tumor was incomplete. Because of the Plicator's 60F distal-end diameter, endoscopic full-thickness suturing could only be performed with the patient under midazolam and propofol sedation. The durable Plicator suture might compromise the endoscopic follow-up after EMR. The endoscopic full-thickness Plicator permits rapid and easy placement of transmural sutures and seems to be a safe and effective alternative to surgical intervention to restore GI-wall defects or to ensure GI-wall patency during EMR procedures.

Cranial suture complexity in caviomorph rodents (Rodentia; Ctenohystrica).

PubMed

Buezas, Guido; Becerra, Federico; Vassallo, Aldo

2017-08-01

Due to their flexibility, sutures are regions that experience greater strains than the surrounding rigid cranial bones. Cranial sutures differ in their degree of interdigitation or complexity. There is evidence indicating that a more convoluted suture better enables the absorption of high stresses coming from dynamic masticatory forces, and other functions. The Order Rodentia is an interesting clade to study this because of its taxa with diverse chewing modes. Due to repeated loading resulting from gnawing and grinding, energy absorption by the sutures might be a crucial factor in these mammals. Species within the infraorder Caviomorpha were chosen as a case study because of their ecomorphological and dietary diversity. This study compared five sutures from the rostrum and cranial vault across seven caviomorph families, and assessed their complexity by means of the relative length and fractal dimension. Across these rodents, cranial sutures are morphologically quite diverse. We found that the sutures connecting the rostrum with the vault were relatively more interdigitated than those in the cranial vault itself, especially premaxillofrontal sutures. Suture interdigitation was higher in species that display chisel-tooth digging and burrowing behaviors, especially in the families Ctenomyidae and Octodontidae, than those in families Dasyproctidae and Cuniculidae, which have more gracile masticatory systems. The reconstruction of the ancestral character state, on family and species phylogeny, points toward low suture interdigitation (i.e., low length ratio) as a likely ancestral state for interfrontal, premaxillofrontal and maxillofrontal sutures. Interspecific differences in suture morphology shown here might represent adaptations to different mechanical demands (i.e., soft vs. tough foods) or behaviors (e.g., chisel-tooth digging), which evolved in close association with the diverse environments occupied by caviomorph rodents. © 2017 Wiley Periodicals, Inc.

A prospective outcome and cost-effectiveness comparison between two ligament reattachment techniques using suture anchors for chronic ankle instability.

PubMed

Cho, Byung-Ki; Kim, Yong-Min; Park, Kyoung-Jin; Park, Ji-Kang; Kim, Do-Kyoon

2015-02-01

There are various ligament reattachment techniques for the modified Brostrom procedure. There have been few comparative studies on recently developed techniques. This prospective study was performed to compare the functional outcomes of 2 different ligament reattachment techniques using suture anchors. We furthermore evaluated the cost-effectiveness of the suture bridge technique. Forty-five amateur athletes under 30 years of age were followed for more than 2 years. Twenty-four procedures with the suture anchor technique and 21 procedures with the suture bridge technique were performed by one surgeon. The functional evaluation consisted of the American Orthopaedic Foot & Ankle Society (AOFAS) score, Foot and Ankle Outcome Score (FAOS), Karlsson score, Sefton grading system, and the period to return to various forms of exercise (jogging, spurt running, jumping, one leg standing for >1 minute, walking on uneven ground, and going down stairs). Measurement of talar tilt angle and anterior talar translation was obtained from stress radiographs to evaluate mechanical stability. There were no significant differences on AOFAS score, FAOS, Karlsson score, Sefton grade, and stress radiographs. There were no significant differences on the return to exercises, except for jumping. As the most common complication, there were 3 cases of skin irritation by suture materials in the suture anchor group and 2 cases of intraoperative breakage of the suture anchor in suture bridge group. Both ligament reattachment techniques using suture anchors showed similar functional outcomes. Considering the additional medical expenses incurred by more suture anchors, the modified Brostrom procedure using the suture bridge technique had low cost-effectiveness. Proper indication and clinical usefulness of suture bridge technique for chronic ankle instability will be addressed in further studies. Level II, prospective comparative study. © The Author(s) 2014.

Geomorphological context of the basins of Northwestern Peninsular Malaysia

NASA Astrophysics Data System (ADS)

Sautter, Benjamin; Pubellier, Manuel; Menier, David

2014-05-01

Geomorphological context of the basins of Northwestern Peninsular Malaysia Benjamin Sautter, Manuel Pubellier, David Menier Department of Petroleum Geosciences, Universiti Teknologi PETRONAS CNRS-UMR 8538, Ecole Normale Supérieure, 24, Rue Lhomond, 75231, Paris Cedex 05, France Petroleum basins of Western Malaysia are poorly known and their formation is controlled by the Tertiary stress variations applied on Mesozoic basement structures. Among these are the Paleozoic-Mesozoic Bentong Raub, Inthanon, and Nan suture zones. By the end of Mesozoic times, the arrival of Indian plate was accompanied by strike slip deformation, accommodated by several Major Faults (Sagaing, Three Pagodas, Mae Ping, Red River, Ranong and Klong Marui Faults). Due to changes in the boundary forces, these areas of weakness (faults) were reactivated during the Tertiary, leading to the opening of basins in most of Sundaland. Within this framework, while most of the Sundaland records stretching of the crust and opening of basins (SCS, Malay, Penyu, Natuna, Mergui) during the Cenozoics, Peninsular Malaysia and the Strait of Malacca are considered to be in tectonic quiescence by most of the authors. We present the geomorphology of the Northwestern Malaysia Peninsula with emphasis on the deformations onshore from the Bentong Raub Suture Zone to the Bok Bak Fault, via the Kinta Valley, and offshore from the Port Klang Graben to the North Penang Graben. By analyzing Digital Elevation Model from ASTER and SRTM data, two main directions of fractures in the granitic plutons are highlighted: NW-SE to W-E sigmoidal faults and N-S to NE-SW linear fractures which seem to cross-cut the others. In the field in the area of the Kinta Valley (Western Belt, NW Peninsular Malaysia), granitic bodies show intense fracturation reflecting several stages of deformation. The granites are generally syntectonic and do not cut fully across the Late Paleozoic platform limestone. Two sets of fractures (NW-SE and NE-SW) appear more penetrative in both granitic and limestone units. On most of the studied outcrops, exfoliation fractures are reactivated into normal faults. Deformation is particularly severe at the contact of the granites and the sediments which is underlined by cataclasic quartz dykes and hornfelds. Off-shore, in the Straits of Malacca, nine tertiary half-grabens are present, all oriented in N-S to NE-SW direction with N-S boundary faults on their western margin. We propose a tectonic scenario for the north-western Malaysia Peninsula according to which the northward motion of India induced first right-lateral transpressionnal tectonics at the End of the Mesozoics (Cretaceous early Tertiary). This system is illustrated in the NW-SE trending fractures of the Main Range Batholith and other Triassic plutons within a system bounded and controlled by the Bok Bak Fault, the KL fault zone and the Bentong Raub Suture Zone. Later, a second stage of transtension led to the opening of the en echelon onshore basins in a tear-faults system, and to the opening of half grabens offshore in the Straits of Malacca.

Laparoscopic percutaneous jejunostomy with intracorporeal V-Loc jejunopexy in esophageal cancer.

PubMed

Yang, Shun-Mao; Hsiao, Wei-Ling; Lin, Jui-Hsiang; Huang, Pei-Ming; Lee, Jang-Ming

2017-06-01

Barbed sutures are widely used in various laparoscopic digestive surgeries. The purpose of this paper is to present our initial experience of laparoscopic percutaneous jejunostomy with unidirectional barbed sutures in esophageal cancer patients and compare it with our early cases using traditional transabdominal sutures. A total of 118 esophageal cancer patients who underwent laparoscopic percutaneous jejunostomy were identified in a single institution in Taiwan from June 2014 to May 2016. The authors' traditional technique consisted of using transabdominal sutures with bolsters to fix a jejunum loop onto the anterior abdominal wall. A novel technique was introduced using intracorporeal suturing with knotless unidirectional barbed monofilament absorbable sutures (V-Loc) to attain a seal around the feeding catheter. A comparison between these two techniques was performed. Twenty cases with barbed V-Loc sutures and 98 cases with transabdominal sutures were identified. The V-Loc sutures appeared to reduce peristomal skin ulcers (19.4 vs. 0 %, p = 0.040), postoperative pain scores during the first 24 h (1.8 ± 1.4 vs. 0.9 ± 1.1, p = 0.007) and on postoperative day 2 (1.7 ± 1.4 vs. 1.0 ± 0.8, p = 0.026) when compared to patients receiving transabdominal sutures. The mean suturing time using V-Loc sutures was 22 min (14-60 min). The mean onset to resumption of enteral feeding was 1.8 ± 0.8 days and the mean duration of postoperative hospital stay was 8 ± 5.1 days, both of which were comparable in the two groups. There was no surgical mortality in our series. In the study cohort, the use of knotless unidirectional barbed sutures instead of traditional transabdominal sutures had similar outcomes and appears to be a feasible option for intracorporeal jejunopexy when performing laparoscopic jejunostomy in patients with esophageal cancer.

Polyvinylidene Fluoride as a Suture Material: Evaluation of Comet Tail-Like Infiltrate and Foreign Body Granuloma.

PubMed

Lambertz, Andreas; Schröder, Kai Michael; Schöb, Dominik Stefan; Binnebösel, Marcel; Anurov, Michael; Klinge, Uwe; Neumann, Ulf Peter; Klink, Christian Daniel

2015-01-01

Biocompatibility and tissue integration of a surgical suture are decisive factors for wound healing and therefore for the success of sutures. The optimal suture material is still under discussion. Polyvinylidene fluoride (PVDF) is described to have superior properties of biocompatibility and is therefore frequently used as a mesh component. Only little information is available about its use as a suture material. The aim of this study was to evaluate the biocompatibility of PVDF as a suture material in comparison to 5 different established sutures in a rat model. In 30 male rats, a monofilamental PVDF suture (Resopren®) and 5 established control suture materials [polyester (Miralene®), polytetrafluoroethylene (Gore®), poliglecaprone (Monocryl®), polydioxanone (Monoplus®), polyglactin 910 (Vicryl®), USP size 3-0] were placed in the subcutaneous layer of the abdominal wall without knot or tension. After 3, 7 or 21 days, the abdominal walls were explanted for histopathological and immunohistochemical investigation with special regard to the size and quality of foreign body granuloma and the length of the comet tail-like infiltrate (CTI). The PVDF sutures showed the smallest size of foreign body granuloma (60 ± 14 µm) and the smallest CTI length (343 ± 60 µm) of all polymers after 21 days. Only PVDF (Resopren) and polydioxanone (Monoplus) showed a significant collagen I/III ratio increase between days 3 and 21 (p = 0.009 and p = 0.016). The quality of foreign body reaction regarding inflammation, proliferation and fibrotic remodeling was similar between all suture materials. Our data indicate that monofilamental PVDF sutures show a favorable foreign body reaction with small granuloma sizes and CTI length in comparison to established sutures. Its use as a suture material in general surgery could therefore be extended in the future. To reinforce these findings, further clinical studies need to be conducted. 2015 S. Karger AG, Basel.

Does UV disinfection compromise sutures? An evaluation of tissue response and suture retention in salmon surgically implanted with transmitters

DOE Office of Scientific and Technical Information (OSTI.GOV)

Walker, Ricardo W.; Brown, Richard S.; Deters, Katherine A.

Ultraviolet radiation (UVR) can be used as a tool to disinfect surgery tools used for implanting transmitters into fish. However, the use of UVR could possibly degrade monofilament suture material used to close surgical incisions. This research examined the effect of UVR on monofilament sutures to determine if they were compromised and negatively influenced tag and suture retention, incision openness, or tissue reaction. Eighty juvenile Chinook salmon Oncorhynchus tshawytscha were surgically implanted with an acoustic transmitter and a passive integrated transponder. The incision was closed with a single stitch of either a suture exposed to 20 doses of UV radiationmore » (5 minute duration per dose) or a new, sterile suture. Fish were then held for 28 d and examined under a microscope at day 7, 14, 21 and 28 for incision openness, ulceration, redness, and the presence of water mold. There was no significant difference between treatments for incision openness, redness, ulceration or the presence of water mold on any examination day. On day 28 post-surgery, there were no lost sutures; however, 2 fish lost their transmitters (one from each treatment). The results of this study do not show any differences in negative influences such as tissue response, suture retention or tag retention between a new sterile suture and a suture disinfected with UVR.« less

Surgical suture braided with a diclofenac-loaded strand of poly(lactic-co-glycolic acid) for local, sustained pain mitigation.

PubMed

Huh, Beom Kang; Kim, Byung Hwi; Kim, Se-Na; Park, Chun Gwon; Lee, Seung Ho; Kim, Ka Ryeong; Heo, Chan Yeong; Choy, Young Bin

2017-10-01

In this work, we propose a surgical suture that can sustainably release diclofenac (DF) for the local pain relief of surgical wounds. We separately fabricated a DF-loaded strand composed of a biodegradable polymer, poly(lactic-co-glycolic acid) (PLGA), which was then braided with a surgical suture already in clinical use, i.e., VICRYL™. In this way, the drug-delivery suture presented herein could release DF in a sustained manner for 10days while maintaining the mechanical strength needed for wound closure. According to the in vivo results of an induced-pain animal model, the drug-delivery suture mitigated pain throughout the period of persistent pain. The histological analysis of tissue around the sutures showed that the drug-delivery suture exhibited biocompatibility comparable to that of the VICRYL™ suture in clinical use. Copyright © 2017 Elsevier B.V. All rights reserved.

Relative efficacy of the argon green, argon blue-green, and krypton red lasers for 10-0 nylon subconjunctival laser suture lysis.

PubMed

Mudgil, A V; To, K W; Balachandran, R M; Janigian, R H; Tsiaras, W G

1999-01-01

To determine the optimal wavelength for subconjunctival laser suture lysis. 130 black monofilament 10-0 nylon sutures were sewn subconjunctivally into the bare sclera of enucleated rabbit globes. The lowest energy levels facilitating laser suture lysis were determined for the argon green (514.5 NM), argon blue-green (488.0 NM, 514.5 NM), and krypton red (647.1 NM) wavelengths. In addition, absorption spectroscopy was performed on the suture material and conjunctiva using the Perkin Elmer W/VIS Lambda 2 spectrometer. Krypton red produced the fewest buttonhole defects, and it was also the most efficient energy source for suture lysis (P = 0.0001) under nontenectomized conjunctiva. Absorbance spectra studies revealed peak absorbance at 628 NM for the 10-0 nylon suture material. Based on animal and absorption spectroscopy studies, krypton red may be a safer and more efficient wavelength for subconjunctival laser suture lysis.

Multilocus phylogeography of the common lizard Zootoca vivipara at the Ibero-Pyrenean suture zone reveals lowland barriers and high-elevation introgression

PubMed Central

2013-01-01

Background The geographic distribution of evolutionary lineages and the patterns of gene flow upon secondary contact provide insight into the process of divergence and speciation. We explore the evolutionary history of the common lizard Zootoca vivipara (= Lacerta vivipara) in the Iberian Peninsula and test the role of the Pyrenees and the Cantabrian Mountains in restricting gene flow and driving lineage isolation and divergence. We also assess patterns of introgression among lineages upon secondary contact, and test for the role of high-elevation trans-mountain colonisations in explaining spatial patterns of genetic diversity. We use mtDNA sequence data and genome-wide AFLP loci to reconstruct phylogenetic relationships among lineages, and measure genetic structure. Results The main genetic split in mtDNA corresponds generally to the French and Spanish sides of the Pyrenees as previously reported, in contrast to genome-wide AFLP data, which show a major division between NW Spain and the rest. Both types of markers support the existence of four distinct and geographically congruent genetic groups, which are consistent with major topographic barriers. Both datasets reveal the presence of three independent contact zones between lineages in the Pyrenean region, one in the Basque lowlands, one in the low-elevation mountains of the western Pyrenees, and one in the French side of the central Pyrenees. The latter shows genetic evidence of a recent, high-altitude trans-Pyrenean incursion from Spain into France. Conclusions The distribution and age of major lineages is consistent with a Pleistocene origin and a role for both the Pyrenees and the Cantabrian Mountains in driving isolation and differentiation of Z. vivipara lineages at large geographic scales. However, mountain ranges are not always effective barriers to dispersal, and have not prevented a recent high-elevation trans-Pyrenean incursion that has led to asymmetrical introgression among divergent lineages. Cytonuclear discordance in patterns of genetic structure and introgression at contact zones suggests selection may be involved at various scales. Suture zones are important areas for the study of lineage formation and speciation, and our results show that biogeographic barriers can yield markedly different phylogeographic patterns in different vertebrate and invertebrate taxa. PMID:24021154

The intra-oceanic Cretaceous (~ 108 Ma) Kata-Rash arc fragment in the Kurdistan segment of Iraqi Zagros suture zone: Implications for Neotethys evolution and closure

NASA Astrophysics Data System (ADS)

Ali, Sarmad A.; Ismail, Sabah A.; Nutman, Allen P.; Bennett, Vickie C.; Jones, Brian G.; Buckman, Solomon

2016-09-01

The Kata-Rash arc fragment is an allochthonous thrust-bound body situated near Penjween, 100 km northeast of Sulymannia city, Kurdistan Region, within the Iraqi portion of the Zagros suture zone. It forms part of the suprasubduction zone 'Upper Allochthon' terranes (designated as the Gimo-Qandil Group), which is dominated by calc-alkaline andesite and basaltic-andesite, rhyodacite to rhyolite, crosscut by granitic, granodioritic, and dioritic dykes. Previously, rocks of the Kata-Rash arc fragment were interpreted as a part of the Eocene Walash volcanic group. However, SHRIMP zircon U-Pb dates on them of 108.1 ± 2.9 Ma (Harbar volcanic rocks) and 107.7 ± 1.9 Ma (Aulan intrusion) indicate an Albian-Cenomanian age, which is interpreted as the time of igneous crystallisation. The Aulan intrusion zircons have initial εHf values of + 8.6 ± 0.2. On a Nb/Yb-Th/Yb diagram, all Kata-Rash samples fall within the compositional field of arc-related rocks, i.e. above the mid-ocean-ridge basalt (MORB)-ocean island basalt (OIB) mantle array. Primitive-mantle-normalised trace-element patterns for the Kata-Rash samples show enrichment in the large ion lithophile elements and depletion in the high-field-strength elements supporting their subduction-related character. Low Ba/La coupled with low La/Yb and Hf/Hf* < 1 for the Aulan sample with initial εHf of + 8.6 ± 0.2 is interpreted as the magma dominated by contributions from fluid fluxing of the mantle wedge and lesser contributions of low temperature melt from subducted slab sediment, in an oceanic setting. This mechanism can explain the sub-DM initial εHf value, without the need to invoke melting of significantly older (continental) crust in an Andean setting. We interpret the Kata-Rash igneous rocks as a fragment of the Late Cretaceous suprasubduction zone system (named here the Kata-Rash arc) that most likely developed within the Neotethys Ocean rather than at a continental margin. Subsequently during the latest Cretaceous to Paleocene, the arc was accreted to the northern margin of the Arabian plate. The results indicate a > 3000 km continuity of Cretaceous arc activity (Oman to Cyprus), that consumed Neotethyian oceanic crust between Eurasia and the Gondwanan fragment Arabia.

Geological and mechanical properties on the 3-D fault patch of the rapid creeping Chihshang Fault: a plate suture between Luzon arc and Eurasia in eastern Taiwan

NASA Astrophysics Data System (ADS)

Lee, J. C.; Mu, C. H.; Huang, W. J.; Liu, Z. Y. C.; Shirzaei, M.

2017-12-01

The 35-km-long Chihshang Fault is a rapidly creeping thrust at plate suture between the converging Philippine and Eurasian plates in eastern Taiwan. We combined geological investigation, geodetic data, seismological information, and a rate-dependant friction model, to illustrate the mechanical frictional properties and their variations along the strike and the depth (30-km-deep) of the fault. During the interseismic period, the Chihshang Fault is characterized by three different slip behaviours at different depths: 1) abundant micro-seismicity and semi-continuous rapid slip at the depth of 10-20 km seismogenic zone; 2) visco-elastic aseismic slip zone beneath 25 km; 3) seasonal locked/creep switch at depth of 0-2 km. Using elastic dislocation model, 1-D diffusion model, Coulomb stress criterion, and rate-dependent frictional law, we simulate the surface creep curves from the creep meters data. The result shows a rate-strengthening zone with positive frictional property (a-b) in the upper 500 meters of fault, which appears to be locked during the dry season. We tend to interpret it as a result of 300-500 m thick of unconsolidated gravels layers in the footwall of the Chihshang Fault. We also implement an inverse dynamic modeling scheme to estimate the frictional parameter () in depths by taking into account pre-seismic stress and coulomb stress changes associated with co- and post-seismic deformation of the 2003 Mw 6.5 Chengkung earthquake. Model parameters are determined from fitting the transient post-seismic geodetic signal measured at 12 continuous GPS stations. We apply a non-linear optimization algorithm, Genetic Algorithm (GA), to search for the optimum parameters. The optimum is 1.4 ×10-2 along the shallow part of the fault (0-10 km depth) and 1.2 × 10-2 in 22-28 km depth. The inferred frictional parameters are consistent with the laboratory measurements on clay rich fault zone gouges comparable to the Lichi mélange, considering the main rock composition of the Chihshang fault. Our results indicate a possibly strong influence from the surface cover of a few hundreds meter thick unconsolidated deposits (i.e., late Quaternary gravel) and the clay rich fault gouge (i.e. the Lichi Melange) on frictional properties.

Gondwana dispersion and Asian accretion: Tectonic and palaeogeographic evolution of eastern Tethys

NASA Astrophysics Data System (ADS)

Metcalfe, I.

2013-04-01

Present-day Asia comprises a heterogeneous collage of continental blocks, derived from the Indian-west Australian margin of eastern Gondwana, and subduction related volcanic arcs assembled by the closure of multiple Tethyan and back-arc ocean basins now represented by suture zones containing ophiolites, accretionary complexes and remnants of ocean island arcs. The Phanerozoic evolution of the region is the result of more than 400 million years of continental dispersion from Gondwana and plate tectonic convergence, collision and accretion. This involved successive dispersion of continental blocks, the northwards translation of these, and their amalgamation and accretion to form present-day Asia. Separation and northwards migration of the various continental terranes/blocks from Gondwana occurred in three phases linked with the successive opening and closure of three intervening Tethyan oceans, the Palaeo-Tethys (Devonian-Triassic), Meso-Tethys (late Early Permian-Late Cretaceous) and Ceno-Tethys (Late Triassic-Late Cretaceous). The first group of continental blocks dispersed from Gondwana in the Devonian, opening the Palaeo-Tethys behind them, and included the North China, Tarim, South China and Indochina blocks (including West Sumatra and West Burma). Remnants of the main Palaeo-Tethys ocean are now preserved within the Longmu Co-Shuanghu, Changning-Menglian, Chiang Mai/Inthanon and Bentong-Raub Suture Zones. During northwards subduction of the Palaeo-Tethys, the Sukhothai Arc was constructed on the margin of South China-Indochina and separated from those terranes by a short-lived back-arc basin now represented by the Jinghong, Nan-Uttaradit and Sra Kaeo Sutures. Concurrently, a second continental sliver or collage of blocks (Cimmerian continent) rifted and separated from northern Gondwana and the Meso-Tethys opened in the late Early Permian between these separating blocks and Gondwana. The eastern Cimmerian continent, including the South Qiangtang block and Sibumasu Terrane (including the Baoshan and Tengchong blocks of Yunnan) collided with the Sukhothai Arc and South China/Indochina in the Triassic, closing the Palaeo-Tethys. A third collage of continental blocks, including the Lhasa block, South West Borneo and East Java-West Sulawesi (now identified as the missing "Banda" and "Argoland" blocks) separated from NW Australia in the Late Triassic-Late Jurassic by opening of the Ceno-Tethys and accreted to SE Sundaland by subduction of the Meso-Tethys in the Cretaceous.

Repair of Meniscal Ramp Lesions Through a Posteromedial Portal During Anterior Cruciate Ligament Reconstruction: Outcome Study With a Minimum 2-Year Follow-up.

PubMed

Thaunat, Mathieu; Jan, Nicolas; Fayard, Jean Marie; Kajetanek, Charles; Murphy, Colin G; Pupim, Barbara; Gardon, Roland; Sonnery-Cottet, Bertrand

2016-11-01

To evaluate the results of arthroscopic all-inside suture repair of medial meniscal ramp lesions through a posteromedial portal during anterior cruciate ligament (ACL) reconstruction. All patients who underwent a suture of the posterior segment of the medial meniscus using a suture hook device through a posteromedial portal during ACL reconstruction with minimum 2 year-follow-up were included in the study. Repair was performed for longitudinal tears within the rim of less than 3 mm (capsulomeniscal junction or red-red zone) or 3 to 5 mm (red-white zone) of an unstable torn meniscus. Patients were assessed pre- and postoperatively with IKDC score and Tegner activity scale. Instrumented knee testing was performed with the Rolimeter arthrometer. Complications including reoperation for failed meniscal repair were also recorded. One hundred thirty-two patients met the inclusion criteria. The mean follow-up time was 27 months (range, 24 to 29 months). The average subjective IKDC rose from 63.8 ± 13.5 (range, 27 to 92) preoperatively to 85.7 ± 12 (range, 43 to 100) at last follow-up (P < .0001). The Rolimeter test decreased from a side-to-side difference in anterior knee laxity of 7 mm (range, 5 to 14 mm) to a mean value of 0.4 mm (range, -3 to 5 mm) at last follow-up (P < .0001). The Tegner activity scale at the last follow-up (6.9 ± 1.72) was slightly lower than that before surgery (7.2 ± 1.92; P = .0017). Nine patients (6.8%) had failure of the meniscal repair. In 5 cases, recurrent tears were related to a newly formed tear located anterior to the initial tear. Our results show that arthroscopic meniscal repair of ramp lesions during ACL reconstruction through a posteromedial portal provided a high rate of meniscus healing at the level of the tear and appeared to be safe and effective in this group of patients. Level IV, therapeutic study, case series (no control group). Copyright © 2016 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.

Cuticular hydrocarbon phenotypes do not indicate cryptic species in fungus-growing termites (Isoptera: Macrotermitinae).

PubMed

Marten, Andreas; Kaib, Manfred; Brandl, Roland

2009-05-01

In several termite species, distinct differences in the composition of cuticular hydrocarbons among colonies correspond to high genetic divergence of mitochondrial DNA sequences. These observations suggest that hydrocarbon phenotypes represent cryptic species. Different cuticular hydrocarbon phenotypes also are found among colonies of fungus-growing termites of the genus Macrotermes. To determine if these hydrocarbon differences in Macrotermes also indicate cryptic species, we sequenced the mitochondrial CO I gene from species in West and East Africa. Among individuals of a supposed species but belonging to different cuticular hydrocarbon phenotypes, the genetic distances are much smaller than distances between species. Unlike what has been observed in other termites, Macrotermes hydrocarbon phenotypes do not represent cryptic species. Our findings suggest fundamental differences in the evolution and/or function of cuticular hydrocarbons among different termite lineages.

Why do cryptic species tend not to co-occur? A case study on two cryptic pairs of butterflies.

PubMed

Vodă, Raluca; Dapporto, Leonardo; Dincă, Vlad; Vila, Roger

2015-01-01

As cryptic diversity is being discovered, mostly thanks to advances in molecular techniques, it is becoming evident that many of these taxa display parapatric distributions in mainland and that they rarely coexist on islands. Genetic landscapes, haplotype networks and ecological niche modeling analyses were performed for two pairs of non-sister cryptic butterfly species, Aricia agestis-A. cramera and Polyommatus icarus-P. celina (Lycaenidae), to specifically assess non-coexistence on western Mediterranean islands, and to test potential causes producing such chequered distribution patterns. We show that the morphologically and ecologically equivalent pairs of species do not coexist on any of the studied islands, although nearly all islands are colonized by one of them. According to our models, the cryptic pairs displayed marked climatic preferences and 'precipitation during the driest quarter' was recovered as the most important climatic determinant. However, neither dispersal capacity, nor climatic or ecological factors fully explain the observed distributions across particular sea straits, and the existence of species interactions resulting in mutual exclusion is suggested as a necessary hypothesis. Given that the studied species are habitat generalists, feeding on virtually unlimited resources, we propose that reproductive interference, together with climatic preferences, sustain density-dependent mechanisms like "founder takes all" and impede coexistence on islands. Chequered distributions among cryptic taxa, both sister and non-sister, are common in butterflies, suggesting that the phenomenon revealed here could be important in determining biodiversity patterns.

FOLLITROPIN RECEPTORS CONTAIN CRYPTIC LIGAND BINDING SITES1

PubMed Central

Lin, Win; Bernard, Michael P.; Cao, Donghui; Myers, Rebecca V.; Kerrigan, John E.; Moyle, William R.

2007-01-01

Human choriogonadotropin (hCG) and follitropin (hFSH) have been shown to contact different regions of the extracellular domains of G-protein coupled lutropin (LHR) and follitropin (FSHR) receptors. We report here that hCG and hFSH analogs interact with an FSHR/LHR chimera having only two unique LHR residues similar to the manners in which they dock with LHR and FSHR, respectively. This shows that although the FSHR does not normally bind hCG, it contains a cryptic lutropin binding site that has the potential to recognize hCG in a manner similar to the LHR. The presence of this cryptic site may explain why equine lutropins bind many mammalian FSHR and why mutations in the transmembrane domain distant from the extracellular domain enable the FSHR to bind hCG. The leucine-rich repeat domain (LRD) of the FSHR also appears to contain a cryptic FSH binding site that is obscured by other parts of the extracellular domain. This will explain why contacts seen in crystals of hFSH complexed with an LRD fragment of the human FSHR are hard to reconcile with the abilities of FSH analogs to interact with membrane G-protein coupled FSHR. We speculate that cryptic lutropin binding sites in the FSHR, which are also likely to be present in thyrotropin receptors (TSHR), permit the physiological regulation of ligand binding specificity. Cryptic FSH binding sites in the LRD may enable alternate spliced forms of the FSHR to interact with FSH. PMID:17059863

Cryptic diversity and ecosystem functioning: a complex tale of differential effects on decomposition.

PubMed

De Meester, N; Gingold, R; Rigaux, A; Derycke, S; Moens, T

2016-10-01

Marine ecosystems are experiencing accelerating population and species loss. Some ecosystem functions are decreasing and there is growing interest in the link between biodiversity and ecosystem functioning. The role of cryptic (morphologically identical but genetically distinct) species in this biodiversity-ecosystem functioning link is unclear and has not yet been formally tested. We tested if there is a differential effect of four cryptic species of the bacterivorous nematode Litoditis marina on the decomposition process of macroalgae. Bacterivorous nematodes can stimulate or slow down bacterial activity and modify the bacterial assemblage composition. Moreover, we tested if interspecific interactions among the four cryptic species influence the decomposition process. A laboratory experiment with both mono- and multispecific nematode cultures was conducted, and loss of organic matter and the activity of two key extracellular enzymes for the degradation of phytodetritus were assessed. L. marina mainly influenced qualitative aspects of the decomposition process rather than its overall rate: an effect of the nematodes on the enzymatic activities became manifest, although no clear nematode effect on bulk organic matter weight loss was found. We also demonstrated that species-specific effects on the decomposition process existed. Combining the four cryptic species resulted in high competition, with one dominant species, but without complete exclusion of other species. These interspecific interactions translated into different effects on the decomposition process. The species-specific differences indicated that each cryptic species may play an important and distinct role in ecosystem functioning. Functional differences may result in coexistence among very similar species.

Why Do Cryptic Species Tend Not to Co-Occur? A Case Study on Two Cryptic Pairs of Butterflies

PubMed Central

Vodă, Raluca; Dapporto, Leonardo; Dincă, Vlad; Vila, Roger

2015-01-01

As cryptic diversity is being discovered, mostly thanks to advances in molecular techniques, it is becoming evident that many of these taxa display parapatric distributions in mainland and that they rarely coexist on islands. Genetic landscapes, haplotype networks and ecological niche modeling analyses were performed for two pairs of non-sister cryptic butterfly species, Aricia agestis-A. cramera and Polyommatus icarus—P. celina (Lycaenidae), to specifically assess non-coexistence on western Mediterranean islands, and to test potential causes producing such chequered distribution patterns. We show that the morphologically and ecologically equivalent pairs of species do not coexist on any of the studied islands, although nearly all islands are colonized by one of them. According to our models, the cryptic pairs displayed marked climatic preferences and ‘precipitation during the driest quarter’ was recovered as the most important climatic determinant. However, neither dispersal capacity, nor climatic or ecological factors fully explain the observed distributions across particular sea straits, and the existence of species interactions resulting in mutual exclusion is suggested as a necessary hypothesis. Given that the studied species are habitat generalists, feeding on virtually unlimited resources, we propose that reproductive interference, together with climatic preferences, sustain density-dependent mechanisms like “founder takes all” and impede coexistence on islands. Chequered distributions among cryptic taxa, both sister and non-sister, are common in butterflies, suggesting that the phenomenon revealed here could be important in determining biodiversity patterns. PMID:25692577

Evolution in karst massifs: Cryptic diversity among bent-toed geckos along the Truong Son Range with descriptions of three new species and one new country record from Laos.

PubMed

Luu, Vinh Quang; Bonkowski, Michael; Nguyen, Truong Quang; Le, Minh Duc; Schneider, Nicole; Ngo, Hanh Thi; Ziegler, Thomas

2016-05-02

Species designated as 'cryptic' share a similar morphotype, and are often only clearly separable by molecular data. Cyrtodactylus, the most diverse gecko genus of the family Gekkonidae, is a prime example, because many morphologically similar taxa have only recently been identified as new species as a result of available genetic evidence. However, while cryptic diversity of Cyrtodactylus is already well documented on the Vietnamese side of the Truong Son range, only scarce data is available from central Laos. In this study, we address this issue by means of an integrative approach, which employs morphological, molecular, and ecological data to distinguish cryptic species of the Cyrtodacylus phongnhakebangensis species group primarily distributed along the northern Truong Son Range. Our analyses based on 12 selected morphological characters, a partial mitochondrial gene (COI), and five ecological parameters revealed three undescribed cryptic Cyrtodactylus species from Hin Nam No National Protected Area, which are described as Cyrtodactylus calamei sp. nov., Cyrtodactylus hinnamnoensis sp. nov., and Cyrtodactylus sommerladi sp. nov. A fourth discovered Cyrtodactylus population in Hin Nam No proved to be the first country record of C. cryptus for Laos. Our results highlight the importance of applying an integrative approach to resolving the taxonomy of complex and cryptic species groups, and the role of the Truong Son Range in maintaining the high level of biodiversity over time.

Causes and methods to estimate cryptic sources of fishing mortality.

PubMed

Gilman, E; Suuronen, P; Hall, M; Kennelly, S

2013-10-01

Cryptic, not readily detectable, components of fishing mortality are not routinely accounted for in fisheries management because of a lack of adequate data, and for some components, a lack of accurate estimation methods. Cryptic fishing mortalities can cause adverse ecological effects, are a source of wastage, reduce the sustainability of fishery resources and, when unaccounted for, can cause errors in stock assessments and population models. Sources of cryptic fishing mortality are (1) pre-catch losses, where catch dies from the fishing operation but is not brought onboard when the gear is retrieved, (2) ghost-fishing mortality by fishing gear that was abandoned, lost or discarded, (3) post-release mortality of catch that is retrieved and then released alive but later dies as a result of stress and injury sustained from the fishing interaction, (4) collateral mortalities indirectly caused by various ecological effects of fishing and (5) losses due to synergistic effects of multiple interacting sources of stress and injury from fishing operations, or from cumulative stress and injury caused by repeated sub-lethal interactions with fishing operations. To fill a gap in international guidance on best practices, causes and methods for estimating each component of cryptic fishing mortality are described, and considerations for their effective application are identified. Research priorities to fill gaps in understanding the causes and estimating cryptic mortality are highlighted. © 2013 The Authors. Journal of Fish Biology © 2013 The Fisheries Society of the British Isles.

Characterization of craniofacial sutures using the finite element method.

PubMed

Maloul, Asmaa; Fialkov, Jeffrey; Wagner, Diane; Whyne, Cari M

2014-01-03

Characterizing the biomechanical behavior of sutures in the human craniofacial skeleton (CFS) is essential to understand the global impact of these articulations on load transmission, but is challenging due to the complexity of their interdigitated morphology, the multidirectional loading they are exposed to and the lack of well-defined suture material properties. This study aimed to quantify the impact of morphological features, direction of loading and suture material properties on the mechanical behavior of sutures and surrounding bone in the CFS. Thirty-six idealized finite element (FE) models were developed. One additional specimen-specific FE model was developed based on the morphology obtained from a µCT scan to represent the morphological complexity inherent in CFS sutures. Outcome variables of strain energy (SE) and von Mises stress (σvm) were evaluated to characterize the sutures' biomechanical behavior. Loading direction was found to impact the relationship between SE and interdigitation index and yielded varied patterns of σvm in both the suture and surrounding bone. Adding bone connectivity reduced suture strain energy and altered the σvm distribution. Incorporating transversely isotropic material properties was found to reduce SE, but had little impact on stress patterns. High-resolution µCT scanning of the suture revealed a complex morphology with areas of high and low interdigitations. The specimen specific suture model results were reflective of SE absorption and σvm distribution patterns consistent with the simplified FE results. Suture mechanical behavior is impacted by morphologic factors (interdigitation and connectivity), which may be optimized for regional loading within the CFS. © 2013 Elsevier Ltd. All rights reserved.

In Vitro Tensile Strength Study on Suturing Technique and Material.

PubMed

González-Barnadas, Albert; Camps-Font, Octavi; Espanya-Grifoll, Dunia; España-Tost, Antoni; Figueiredo, Rui; Valmaseda-Castellón, Eduard

2017-06-01

Suture technique and materials are important in preventing complications such as wound dehiscences. The purpose of this study was to determine the tensile strength of different suturing techniques, comparing several materials with different diameters. One hundred sixty sutures were performed using silk, e-PTFE, and 2 types of polyamide (monofilament and Supramid). Ten simple, 10 horizontal mattress, and 10 combinations of the two stitches were performed with 4-0 gauge of each material. Additionally, 10 simple sutures were performed with the 5-0 gauge of each material. The maximum tensile force resisted by each suture was recorded. When 5 mm of traction was applied, the polyamide monofilament resisted significantly better without untying or breaking compared with Supramid or silk, while the e-PTFE was superior to all the others. However, the force when e-PTFE 4-0 sutures untied or broke was lower than for either type of polyamide. The combined technique withstood a significantly higher tensile force before unknotting or breaking than did the simple and mattress stitches. The 5-0 gauges of silk and both types of polyamide showed lower tensile strengths than the 4-0 materials. Among the 5-0 sutures, Supramid showed a higher tensile strength than silk. The combined suture technique possessed greater tensile strength than did a simple or a horizontal mattress suture, and e-PTFE 4-0 withstood more traction without untying or breaking than did all the other materials, although at a lower tensile force. With the exception of e-PTFE, 4-0 sutures had greater tensile strength than did 5-0 sutures.

Prospective evaluation of unidirectional barbed suture for various indications in surgeon-controlled robotic reconstructive urologic surgery: Wake Forest University experience.

PubMed

Shah, Hemendra N; Nayyar, Rishi; Rajamahanty, Shrinivas; Hemal, Ashok K

2012-06-01

To evaluate the usage of unidirectional barbed suture and its related implications in various surgeon-controlled robotic reconstructive urologic surgeries. From March 2010 to March 2011, all patients undergoing various surgeon-controlled robotic reconstructive urologic surgeries utilizing barbed sutures were prospectively enrolled in this study. Type and number of procedure performed were noted. Intraoperative and peri-operative outcomes potentially related to suture technique and material were recorded. This study reports on 210 patients, in whom barbed suture was used during this period. These included partial nephrectomy (20), pyeloplasty (9), ureteric tailoring and reimplantation (1), closure of bladder after Nephroureterectomy with excision of bladder cuff (8), closure of vaginal cuff in female radical cystectomy (12), partial cystectomy (1), radical prostatectomy (152), simple prostatectomy (2), vesicovaginal fistula repair (3), sacrocolpopexy (1), and hernia repair (1). We encountered 5 instances (2.38%) of tissue cut through possibly attributable to the use of barbed suture and 4 instances of misplacement of suture occurred, of these two required a new suture, whereas retrograde pull back of suture and needle was performed in 2 cases. No instance of slip back/loosening of suture was noted once it was tightened. At mean follow-up of 6.8 (1-14 months) months, we did not encounter any complications of urinary leakage, stone formation or fistula or any clinical evidence of urinary tract obstruction due to the use of barbed suture. Use of unidirectional barbed suture is safe, feasible, and efficient at short-term follow-up for reconstructive part of urological procedures.

Biocompatibility and strength properties of nitinol shape memory alloy suture in rabbit tendon.

PubMed

Kujala, Sauli; Pajala, Ari; Kallioinen, Matti; Pramila, Antti; Tuukkanen, Juha; Ryhänen, Jorma

2004-01-01

Nitinol (NiTi) is a promising new tendon suture material with good strength, easy handling and good super-elastic properties. NiTi sutures were implanted for biocompatibility testing into the right medial gastrocnemius tendon in 15 rabbits for 2, 6 and 12 weeks. Additional sutures were implanted in subcutaneous tissue for strength measurements in order to determine the effect of implantation on strength properties of NiTi suture material. Braided polyester sutures (Ethibond) of approximately the same diameter were used as control. Encapsulating membrane formation around the sutures was minimal in the case of both materials. The breaking load of NiTi was significantly greater compared to braided polyester. Implantation did not affect the strength properties of either material.

Perioperative Modulating Factors on Astigmatism in Sutured Cataract Surgery

PubMed Central

Cho, Yang Kyeung

2009-01-01

Purpose To evaluate the factors that affect postoperative astigmatism and post-suture removal astigmatism, and to evaluate the risk factors associated with astigmatism axis shift. Methods We performed a retrospective chart review of 130 eyes that had undergone uneventful phacoemulsification cataract surgery. Preoperative astigmatism was divided into four groups (Groups I, II, III, and IV) according to the differences between the axis of preoperative astigmatism (flattest axis) and the incision axis (105 degrees). We analyzed the magnitude and axis of the induced astigmatism after the operation and after suture removal in each group. We also analyzed the factors which affected the postoperative astigmatism and post-suture removal astigmatism in each sub-group of Groups I, II, III, and IV, excluding postoperative or post-suture removal axis shift (specifically, Group IWAS, IIWAS, IIIWAS, and IVWAS). We identified the variables associated with the prevalence of postoperative astigmatism axis shift and those associated with the prevalence of post-suture removal axis shift. Results An increase in the magnitude of postoperative astigmatism was associated with an increase in the preoperative magnitude of astigmatism in Groups IWAS, IIWAS, and IIIWAS (p<0.05), and with an increase in the corneal tunnel length in Group IWAS. A decrease in the magnitude of postoperative astigmatism was associated with an increase in the corneal tunnel length in Groups IIIWAS and IVWAS (p<0.05). An increase in the magnitude of post-suture removal astigmatism was associated with an increase in the magnitude of postoperative astigmatism in Groups IWAS and IVWAS (p<0.05), and with late suture removal in Group IVWAS (p<0.05). A decrease in the magnitude of post-suture removal astigmatism was associated with late suture removal in Groups IWAS and IIWAS. A logistic regression analysis showed that the prevalence of post-suture removal astigmatism axis shift was associated with increased corneal tunnel length, decreased magnitude of postoperative astigmatism, and early suture removal. Conclusions In order to reduce postoperative and post-suture removal astigmatism, we recommend a short corneal tunnel length and late suture removal in patients with Group IWAS characteristics, late suture removal in Group IIWAS-like patients, long corneal tunnel length in Group IIIWAS-like patients, and long corneal tunnel length and early suture removal in patients with characteristics of Group IVWAS. PMID:20046682

Tensile strength and failure load of sutures for robotic surgery.

PubMed

Abiri, Ahmad; Paydar, Omeed; Tao, Anna; LaRocca, Megan; Liu, Kang; Genovese, Bradley; Candler, Robert; Grundfest, Warren S; Dutson, Erik P

2017-08-01

Robotic surgical platforms have seen increased use among minimally invasive gastrointestinal surgeons (von Fraunhofer et al. in J Biomed Mater Res 19(5):595-600, 1985. doi: 10.1002/jbm.820190511 ). However, these systems still suffer from lack of haptic feedback, which results in exertion of excessive force, often leading to suture failures (Barbash et al. in Ann Surg 259(1):1-6, 2014. doi: 10.1097/SLA.0b013e3182a5c8b8 ). This work catalogs tensile strength and failure load among commonly used sutures in an effort to prevent robotic surgical consoles from exceeding identified thresholds. Trials were thus conducted on common sutures varying in material type, gauge size, rate of pulling force, and method of applied force. Polydioxanone, Silk, Vicryl, and Prolene, gauges 5-0 to 1-0, were pulled till failure using a commercial mechanical testing system. 2-0 and 3-0 sutures were further tested for the effect of pull rate on failure load at rates of 50, 200, and 400 mm/min. 3-0 sutures were also pulled till failure using a da Vinci robotic surgical system in unlooped, looped, and at the needle body arrangements. Generally, Vicryl and PDS sutures had the highest mechanical strength (47-179 kN/cm 2 ), while Silk had the lowest (40-106 kN/cm 2 ). Larger diameter sutures withstand higher total force, but finer gauges consistently show higher force per unit area. The difference between material types becomes increasingly significant as the diameters decrease. Comparisons of identical suture materials and gauges show 27-50% improvement in the tensile strength over data obtained in 1985 (Ballantyne in Surg Endosc Other Interv Tech 16(10):1389-1402, 2002. doi: 10.1007/s00464-001-8283-7 ). No significant differences were observed when sutures were pulled at different rates. Reduction in suture strength appeared to be strongly affected by the technique used to manipulate the suture. Availability of suture tensile strength and failure load data will help define software safety protocols for alerting a surgeon prior to suture failure during robotic surgery. Awareness of suture strength weakening with direct instrument manipulation may lead to the development of better techniques to further reduce intraoperative suture breakage.

Infrared laser thermal fusion of blood vessels: preliminary ex vivo tissue studies.

PubMed

Cilip, Christopher M; Rosenbury, Sarah B; Giglio, Nicholas; Hutchens, Thomas C; Schweinsberger, Gino R; Kerr, Duane; Latimer, Cassandra; Nau, William H; Fried, Nathaniel M

2013-05-01

Suture ligation of blood vessels during surgery can be time-consuming and skill-intensive. Energy-based, electrosurgical, and ultrasonic devices have recently replaced the use of sutures and mechanical clips (which leave foreign objects in the body) for many surgical procedures, providing rapid hemostasis during surgery. However, these devices have the potential to create an undesirably large collateral zone of thermal damage and tissue necrosis. We explore an alternative energy-based technology, infrared lasers, for rapid and precise thermal coagulation and fusion of the blood vessel walls. Seven near-infrared lasers (808, 980, 1075, 1470, 1550, 1850 to 1880, and 1908 nm) were tested during preliminary tissue studies. Studies were performed using fresh porcine renal vessels, ex vivo, with native diameters of 1 to 6 mm, and vessel walls flattened to a total thickness of 0.4 mm. A linear beam profile was applied normal to the vessel for narrow, full-width thermal coagulation. The laser irradiation time was 5 s. Vessel burst pressure measurements were used to determine seal strength. The 1470 nm laser wavelength demonstrated the capability of sealing a wide range of blood vessels from 1 to 6 mm diameter with burst strengths of 578 ± 154, 530 ± 171, and 426 ± 174  mmHg for small, medium, and large vessel diameters, respectively. Lateral thermal coagulation zones (including the seal) measured 1.0 ± 0.4  mm on vessels sealed at this wavelength. Other laser wavelengths (1550, 1850 to 1880, and 1908 nm) were also capable of sealing vessels, but were limited by lower vessel seal pressures, excessive charring, and/or limited power output preventing treatment of large vessels (>4  mm outer diameter).

Doppler-guided haemorrhoidal artery ligation with suture mucopexy compared with suture mucopexy alone for the treatment of Grade III haemorrhoids: a prospective randomized controlled trial.

PubMed

Aigner, F; Kronberger, I; Oberwalder, M; Loizides, A; Ulmer, H; Gruber, L; Pratschke, J; Peer, S; Gruber, H

2016-07-01

Novel minimally invasive techniques aimed to reposition the haemorrhoidal zone have been established for prolapsing haemorrhoids. We present a prospective randomized controlled trial to evaluate the efficacy of additional Doppler-guided ligation of submucosal haemorrhoidal arteries (DG-HAL) in patients with symptomatic Grade III haemorrhoids. The trial was registered as ClinicalTrials.gov identifier NCT02372981. All consecutive patients with symptomatic Grade III haemorrhoids were randomly allocated to one of the two study arms: (i) Group A, DG-HAL with mucopexy or (ii) Group B, mucopexy alone. End-points were postoperative pain, faecal incontinence, bleeding, residual prolapse and alterations of the vascularization of the anorectal vascular plexus. Vascularization of the anorectal vascular plexus was assessed by transperineal contrast enhanced ultrasound. Patients recorded their symptoms in a diary maintained for a month. Forty patients were recruited and randomized to the two study groups. Patients in Group A had less pain in the first two postoperative weeks. At the 12-month follow-up, two patients in Group A (10%) and one in Group B (5%) showed recurrent Grade III haemorrhoids (P = 0.274). No significant morphological changes were observed in the transperineal ultrasound findings between the preoperative assessment and the assessment at 1 and 6 months in either group (P > 0.05). Mucopexy techniques for treating prolapsing haemorrhoids are effective, but DG-HAL does not add significantly to the results achieved by mucopexy. Repositioning the haemorrhoidal zone is the key to success, and mucopexy should be placed at the sites of the largest visible prolapse. Colorectal Disease © 2016 The Association of Coloproctology of Great Britain and Ireland.

Structure of crust and upper mantle beneath NW Himalayas, Pamir and Hindukush by multi-scale double-difference seismic tomography

NASA Astrophysics Data System (ADS)

Bhatti, Zahid Imran; Zhao, Junmeng; Khan, Nangyal Ghani; Shah, Syed Tallataf Hussain

2018-08-01

The India-Asia collision and subsequent subduction initiated the evolution of major tectonic features in the Western Syntaxis. The complex tectonic structure and shallow to deep seismicity have attracted geoscientists over the past two decades. The present research is based on a 3D tomographic inversion of P-wave arrival time data to constrain the crustal and upper mantle structure beneath the NW Himalayas and Pamir-Hindukush region using the Double-difference tomography. We utilized a very large multi-scale dataset comprising 19,080 earthquakes recorded at 397 local and regional seismic stations from 1950 to 2017. The northward dipping seismic zone coinciding with the low velocity anomaly suggests the subduction of the Indian lower crust beneath the Hindukush. The extent of the northward advancing Indian slab increases from east to west in this region. We observed no signs of northward subduction of the Indian plate under the Hindukush beyond 71°E longitude. The Indian plate overturns due south after interacting with the Asian plate beneath the southern Pamir, which correlates with the counter-clockwise rotation of the Indian plate. The Asian plate is also imaged as a southward subducting seismic zone beneath the southern Pamir. In the NW Himalayas, the northward subducting Indian plate appears as a gently dipping low velocity anomaly beneath the Karakoram Block. The stresses caused by the collision and subduction along the Shyok Suture and Indus Suture are translated to the south. The crustal scale seismicity and high velocity anomalies indicate an intense deformation in the crust, which is manifested by syntaxial bends and thrust faults to the south of the Main Mantle Thrust.

High-Pressure Granulite Facies Overprinting During the Exhumation of Eclogites in the Bangong-Nujiang Suture Zone, Central Tibet: Link to Flat-Slab Subduction

NASA Astrophysics Data System (ADS)

Zhang, Xiu-Zheng; Wang, Qiang; Dong, Yong-Sheng; Zhang, Chunfu; Li, Qing-Yun; Xia, Xiao-Ping; Xu, Wang

2017-12-01

The geometric transformation of a descending plate, such as from steep to flat subduction in response to a change from normal to overthickened oceanic crust during subduction, is a common and important geological process at modern or fossil convergent margins. However, the links between this process and the metamorphic evolution of the exhumation of oceanic (ultra)high-pressure eclogites are poorly understood. Here we report detailed petrological, mineralogical, phase equilibria, and secondary ion mass spectrometry zircon and rutile U-Pb age data for the Dong Co eclogites at the western segment of the Bangong-Nujiang suture zone, central Tibet. Our data reveal that the Dong Co eclogites experienced peak eclogite-facies metamorphism (T = 610-630°C, P = 2.4-2.6 GPa) and underwent multiple stages of retrograde metamorphism. P-T pseudosections and compositional isopleths of garnet define a complex clockwise P-T-t path (including two stages of decompression-dominated P-T path and one of isobaric heating), suggesting varying exhumation velocities. Combining previous studies with our new results, we suggest that the transformation from rapid to slow exhumation is dominated by the transition from steep to flat subduction. The flat-slab segment, caused by subduction of buoyant oceanic plateau, led to an extremely slow exhumation and a strong overprinting of HP granulite facies at a depth of 50 km at 177 Ma. The slab rollback that followed in response to a substantial density increase of the eclogitized oceanic plateau resulted in another rapid exhumation process at 168 Ma and triggered the formation of abundant near-simultaneous or later magmatic rocks.

Interpretation of the 'Trans European Suture Zone' by a multiscale aeromagnetic dataset

NASA Astrophysics Data System (ADS)

Milano, Maurizio; Fedi, Maurizio

2015-04-01

One of the main goals in crustal geomagnetic prospecting is to obtain information about the sources of magnetic anomalies in order to model the geological structure of the Earth's crust. A "multiscale approach" is very useful to analyze, concurrently, the effects of sources placed at different depths, observing the potential field at various altitudes from the Earth's surface. The aim of this work is the study of the main geological structure of Central Europe, the "Trans European Suture Zone", using high-resolution aeromagnetic data. The 'TESZ' is the most prominent geological boundary in Europe, oriented NW-SE from the North Sea to the Black Sea and separating The Paleozoic platform in the south and west from the Precambrian East European craton. At high altitudes the European magnetic field is characterized by a large and extended magnetic low, which is related to the deep TESZ structure. The study of this anomaly field began by detecting the position of the anomaly sources using the properties of the Analytical Signal modulus (AS). The AS map presents anomalies in which the dipolar behavior of the magnetic anomaly field is substantially removed and the maxima are placed directly above the anomaly sources. The multiridge method has been applied to the Analytical Signal modulus in order to have information about the sources' depths in the TESZ region. Many profiles were tracked transversely to the fault line in order to map at depth the main magnetic discontinuities. Cause of the low heat flow of the Central Europe, we were able to get information also in the lower crust and to map the deep Moho discontinuity. Available geological sections based on seismic data show consistent results with our interpretation.

Miocene exhumation of the Indus-Yarlung Suture Zone in NW India: An insight into the controls of tectonics and climate

NASA Astrophysics Data System (ADS)

Bhattacharya, G.; Robinson, D. M.; Orme, D. A.; Olree, E.; Bosu, S.

2016-12-01

Detritus from the India-Asia collision and subsequent Cenozoic tectonic events is preserved in sedimentary basins along the 2500 km long Indus-Yarlung Suture Zone (IYSZ) in India and Tibet. In northwest India, these Eocene-Miocene synorogenic sedimentary rocks are preserved in the Tar and Indus Groups. We use (U-Th)/He dating of detrital zircons from units within these sedimentary basins, including the Temesgam Formation at Temesgam, the Lower Nimu Formation and the Sumdo Formation in the Zanskar Gorge, and the Artsa Formation and the Miru Formation in the Upshi-Lato region. These analyses indicate a phase of rapid exhumation from 19-8 Ma. Possible explanations for these data include a combination of tectonic events and the influence of climate. Regional back-thrusting initiated at 20 Ma along the Great Counter Thrust, which buried the IYSZ footwall with the Lamayuru slope deposits of the Indian passive margin. In south Tibet, previous studies identify underthrusting of the Indian plate as a key factor for basin exhumation in the IYSZ, which may also be a driver in northwest India. The flow of the paleo-Indus river through the IYSZ in Early Miocene time might have been triggered by the onset of Asian monsoon at 24 Ma and its intensification between 18-10 Ma. Our data demonstrate a phase of rapid exhumation in northwest India from 19-8 Ma, which may be linked to all of these tectonic and climate influences. Data in this study are similar to the data of Carrapa et al. (2014) from south Tibet that show peak exhumation at 17 Ma, and suggest that a regional cooling episode, driven by tectonics and climate, might have prevailed in the Miocene along the IYSZ.

Mesozoic Compressional Folds of the Nansha Waters, Southern South China Sea

NASA Astrophysics Data System (ADS)

Zhu, R.; Liu, H.; Yao, Y.; Wang, Y.

2017-12-01

As an important part of the South China Sea, the southern margin of the South China Sea is fundamental to understand the interaction of the Eurasian, Pacific and Indian-Australian plates and the evolution of the South China Sea. Some multi-channel seismic profiles of the Nansha waters together with published drillings and dredge data were correlated for interpretation. The strata of the study region can be divided into the upper, middle and lower structural layers. The upper and middle structural layers with extensional tectonics are Cenozoic; the lower structural layer suffered compression is Mesozoic. Further structural restoration was done to remove the Cenozoic tectonic influence and to calculate the Mesozoic tectonic compression ratios. The results indicate that two diametrically opposite orientations of compressive stress, S(S)E towards N(N)W orientation and N(N)W towards S(S)E orientation respectively, once existed in the lower structural layer of the study area and shared the same variation trend. The compression ratio values gradually decrease both from the north to the south and from the west to the east in each stress orientation. The phenomena may be related to the opening of the proto-South China Sea (then located in south of the Nansha block) and the rate of the Nansha block drifted northward in Late Jurassic to Late Cretaceous, which had pushed the Nansha block drifted northward until it collided and sutured with the Southern China Margin. Thus the opening of the present-day South China Sea may be related to this suture zone, which was tectonically weakness zone.Key words: Mesozoic compression; structural restoration; proto-South China Sea; Nansha waters; Southern South China Sea; Acknowledgements: The work was granted by the National Natural Science Foundation of China (Grant Nos. 41476039, 91328205, 41576068 and 41606080).

Ergonomic principles of task alignment, visual display, and direction of execution of laparoscopic bowel suturing.

PubMed

Emam, T A; Hanna, G; Cuschieri, A

2002-02-01

Laparoscopic suturing is technically a demanding skill in laparoscopic surgery. Ergonomic experimental studies provide objective information on the important factors and variables that govern optimal endoscopic suturing. Our objective was to determine the optimum physical alignment, visual display, and direction of intracorporeal laparoscopic bowel suturing using infrared motion analysis and telemetric electromyography (EMG) systems. Ten surgeons participated in the study; each sutured 50-mm porcine small bowel enterotomies toward and away from the surgeon in the vertical and horizontal bowel plane with either isoplanar (image display corresponds with actual lie of the bowel) or nonisoplanar (bowel displayed horizontally but mounted vertically in the trainer and vice versa) display. The end points were the placement error score, execution time, leakage pressure, motion analysis, and telemetric EMG parameters of the surgeon's dominant upper limb. Suturing was demonstrably easier in the vertical than in the horizontal plane, resulting in a better task quality (placement error score, p < 0.0001; leakage pressure, p < 0.005) and shorter execution time (p < 0.05). Nonisoplanar display of the surgical anatomy degrades performance in terms of both task efficiency and task quality. On motion analysis, a wider angle of excursion and lower angular velocity were observed during the vertical suturing with isoplaner display. Compared to horizontal suturing, supination at the wrist was significantly greater during vertical than horizontal suturing (p < 0.05). Within each category (vertical vs horizontal suturing), the direction of suturing (toward/away from the surgeon) did not influence the extent of pronation/ supination at the wrist. In line with the degraded performance, significantly more muscle work was expended during horizontal suturing. This affected the forearm flexors (p < 0.05), arm flexors and extensors (p < 0.005 and p < 0.05, respectively), and deltoid muscles (p < 0.005) and was accompanied by significantly more fatigue in the related muscles. Small bowel enterotomies sutured toward the surgeon in both the vertical and the horizontal planes exhibited less placement error score than when sutured away from the surgeon, with no significant difference in the motion analysis and EMG parameters. Optimal laparoscopic suturing (better task quality and reduced execution time) is achieved with vertical suturing toward the surgeon with isoplanar monitor display of the operative field. The poorer task performance observed during horizontal suturing is accompanied by more muscle work and fatigue, and it is not improved by monitor display of the enterotomy in the vertical plane.

High levels of cryptic species diversity uncovered in Amazonian frogs

PubMed Central

Funk, W. Chris; Caminer, Marcel; Ron, Santiago R.

2012-01-01

One of the greatest challenges for biodiversity conservation is the poor understanding of species diversity. Molecular methods have dramatically improved our ability to uncover cryptic species, but the magnitude of cryptic diversity remains unknown, particularly in diverse tropical regions such as the Amazon Basin. Uncovering cryptic diversity in amphibians is particularly pressing because amphibians are going extinct globally at an alarming rate. Here, we use an integrative analysis of two independent Amazonian frog clades, Engystomops toadlets and Hypsiboas treefrogs, to test whether species richness is underestimated and, if so, by how much. We sampled intensively in six countries with a focus in Ecuador (Engystomops: 252 individuals from 36 localities; Hypsiboas: 208 individuals from 65 localities) and combined mitochondrial DNA, nuclear DNA, morphological, and bioacoustic data to detect cryptic species. We found that in both clades, species richness was severely underestimated, with more undescribed species than described species. In Engystomops, the two currently recognized species are actually five to seven species (a 150–250% increase in species richness); in Hypsiboas, two recognized species represent six to nine species (a 200–350% increase). Our results suggest that Amazonian frog biodiversity is much more severely underestimated than previously thought. PMID:22130600

High-model abundance may permit the gradual evolution of Batesian mimicry: an experimental test

PubMed Central

Kikuchi, David W.; Pfennig, David W.

2010-01-01

In Batesian mimicry, a harmless species (the ‘mimic’) resembles a dangerous species (the ‘model’) and is thus protected from predators. It is often assumed that the mimetic phenotype evolves from a cryptic phenotype, but it is unclear how a population can transition through intermediate phenotypes; such intermediates may receive neither the benefits of crypsis nor mimicry. Here, we ask if selection against intermediates weakens with increasing model abundance. We also ask if mimicry has evolved from cryptic phenotypes in a mimetic clade. We first present an ancestral character-state reconstruction showing that mimicry of a coral snake (Micrurus fulvius) by the scarlet kingsnake (Lampropeltis elapsoides) evolved from a cryptic phenotype. We then evaluate predation rates on intermediate phenotypes relative to cryptic and mimetic phenotypes under conditions of both high- and low-model abundances. Our results indicate that where coral snakes are rare, intermediate phenotypes are attacked more often than cryptic and mimetic phenotypes, indicating the presence of an adaptive valley. However, where coral snakes are abundant, intermediate phenotypes are not attacked more frequently, resulting in an adaptive landscape without a valley. Thus, high-model abundance may facilitate the evolution of Batesian mimicry. PMID:19955153

High-model abundance may permit the gradual evolution of Batesian mimicry: an experimental test.

PubMed

Kikuchi, David W; Pfennig, David W

2010-04-07

In Batesian mimicry, a harmless species (the 'mimic') resembles a dangerous species (the 'model') and is thus protected from predators. It is often assumed that the mimetic phenotype evolves from a cryptic phenotype, but it is unclear how a population can transition through intermediate phenotypes; such intermediates may receive neither the benefits of crypsis nor mimicry. Here, we ask if selection against intermediates weakens with increasing model abundance. We also ask if mimicry has evolved from cryptic phenotypes in a mimetic clade. We first present an ancestral character-state reconstruction showing that mimicry of a coral snake (Micrurus fulvius) by the scarlet kingsnake (Lampropeltis elapsoides) evolved from a cryptic phenotype. We then evaluate predation rates on intermediate phenotypes relative to cryptic and mimetic phenotypes under conditions of both high- and low-model abundances. Our results indicate that where coral snakes are rare, intermediate phenotypes are attacked more often than cryptic and mimetic phenotypes, indicating the presence of an adaptive valley. However, where coral snakes are abundant, intermediate phenotypes are not attacked more frequently, resulting in an adaptive landscape without a valley. Thus, high-model abundance may facilitate the evolution of Batesian mimicry.

Cryptic introductions and the interpretation of island biodiversity.

PubMed

Avery, Julian D; Fonseca, Dina M; Campagne, Pascal; Lockwood, Julie L

2013-04-01

Species with cryptic origins (i.e. those that cannot be reliably classed as native or non-native) present a particular challenge to our understanding of the generation and maintenance of biodiversity. Such species may be especially common on islands given that some islands have had a relatively recent history of human settlement. It is likely that select island species considered native might have achieved their current distributions via direct or indirect human actions. As an example, we explore the origins of eastern bluebirds (Sialia sialis bermudensis) on the island of Bermuda. Considered native to the island and a distinct subspecies, this population has diverged in morphology relative to mainland North America. Using microsatellite markers and simulation of island colonization, we show that the Bermuda population of bluebirds is the likely result of a single colonization event that occurred during the 1600s, making this a cryptic invader. To our knowledge, this is one of the youngest examples of a terrestrial vertebrate cryptic invader. We suggest that the eastern bluebird is not an isolated case of cryptic invader on either Bermuda or elsewhere and that caution be exercised when studying present-day distributions of organisms. © 2013 Blackwell Publishing Ltd.

Arthroscopic repair of the posterior root of the medial meniscus using knotless suture anchor: A technical note.

PubMed

Eun, Sang Soo; Lee, Sang Ho; Sabal, Luigi Andrew

2016-08-01

There are numerous methods for repairing posterior root tears of the medial meniscus (PRTMM). Repair techniques using suture anchors through a high posteromedial portal have been reported. The present study found that using a knotless suture anchor instead of suture anchor seemed easier and faster because it avoided passing the sutures through the meniscus and tying a knot in a small space. This study describes a knotless suture anchor technique through a high posteromedial portal, and its clinical results. Copyright © 2016 Elsevier B.V. All rights reserved.

[Auto-suture stapler EEA in surgery of the colon and rectum [author's transl)].

PubMed

Thiede, A; Troidl, H; Poser, H; Jostarndt, L; Hamelmann, H

1980-01-01

The increasing use of auto-suture staplers for gastrointestinal anastomoses makes it necessary to test the value of this new method of suturing. In a "pilot study" the practicability, the tightness and permeability of the anastomosis and complications were tested and analysed in a total of 30 colon and rectal anastomoses using the EEA-suture gun. The results of 14 colon resections and 16 low anterior resections justify the further use of the EEA auto-suture apparatus and raise the question of a prospective controlled random study in which manual and mechanical machine sutured anastomoses are compared.

Elimination of stick-slip of elastomeric sutures by radiofrequency glow discharge deposited coatings.

PubMed

Griesser, H J; Chatelier, R C; Martin, C; Vasic, Z R; Gengenbach, T R; Jessup, G

2000-01-01

Fine elastomeric sutures intended for cardiovascular surgery can exhibit "stick-slip" behavior as they are pulled through tissue; the resulting oscillatory force can damage delicate tissue or cause sutures to snap. To eliminate this undesirable effect, sutures were surface-modified using a radiofrequency glow discharge in a vapor of either hexamethyldisiloxane or hexamethyldisilazane, to produce a thin polymeric coating on the suture. The same coatings were also deposited onto aluminized tape to facilitate their characterization by measurement of air/water contact angles and by X-ray photoelectron spectroscopy. Coatings from both monomers were found to be very hydrophobic. The hexamethyldisiloxane glow discharge coatings underwent negligible oxidation when stored in air, and thus remained stable over a shelf-life period akin to what may be required of sutures. The hexamethyldisilazane glow discharge coatings, in contrast, incorporated substantial amounts of oxygen over a 3-month period. The coatings did not measurably alter the tensile properties of the sutures. The frictional properties of coated sutures were assessed by measuring the dynamic friction between the suture and ovine myocardium. Both coatings were effective in removing the inherent stick-slip behavior of polybutester sutures in this model. The coatings remained intact after several passes and proved to be robust and efficacious under various strain regimes. Copyright 2000 John Wiley & Sons, Inc.

Mesozoic to Eocene ductile deformation of western Central Iran: From Cimmerian collisional orogeny to Eocene exhumation

NASA Astrophysics Data System (ADS)

Kargaranbafghi, Fariba; Neubauer, Franz; Genser, Johann; Faghih, Ali; Kusky, Timothy

2012-09-01

To advance our understanding of the Mesozoic to Eocene tectonics and kinematics of basement units exposed in the south-western Central Iran plateau, this paper presents new structural and thermochronological data from the Chapedony metamorphic core complex and hangingwall units, particularly from the Posht-e-Badam complex. The overall Paleogene structural characteristics of the area are related to an oblique convergent zone. The Saghand area represents part of a deformation zone between the Arabian and Eurasian plates, and can be interpreted to result from the Central Iran intracontinental deformation acting as a weak zone during Mesozoic to Paleogene times. Field and microstructural evidence reveal that the metamorphic and igneous rocks suffered a ductile shear deformation including mylonitization at the hangingwall boundary of the Eocene Chapedony metamorphic core complex. Comparison of deformation features in the mylonites and other structural features within the footwall unit leads to the conclusion that the mylonites were formed in a subhorizontal shear zone by NE-SW stretching during Middle to Late Eocene extensional tectonics. The Chapedony metamorphic core complex is characterized by amphibolite-facies metamorphism and development of S and S-L tectonic fabrics. The Posht-e-Badam complex was deformed by two stages during Cimmerian tectonic processes forming the Paleo-Tethyan suture.

Arthroscopically assisted acromioclavicular joint reconstruction.

PubMed

Baumgarten, Keith M; Altchek, David W; Cordasco, Frank A

2006-02-01

Arthroscopically assisted acromioclavicular joint reconstruction avoids the large incisions necessary with open reconstructions. This acromioclavicular joint reconstruction technique via the subacromial space does not violate the rotator interval or require screw removal. The patient is placed in a modified beach-chair position. The arthroscope is placed into the subacromial space, and a bursectomy is performed through a lateral subacromial portal. The coracoacromial ligament is released from the acromion with an electrocautery and an arthroscopic elevator. A nonabsorbable suture is passed through the coracoacromial ligament with a suture passer, and an arthroscopic suture grasper is used to deliver both ends of the suture out through the lateral portal. The coracoid is identified and isolated using a radiofrequency ablator placed through the anterior portal while visualizing through the lateral portal. A percutaneous shuttle device is passed through the skin superomedial to the coracoid. The shuttle is visualized entering superior to the coracoid and is passed just medial to the coracoid. Once the tip of the shuttle can be visualized in the recess inferior to the coracoid, the shuttle loop is advanced. A suture grasper is used to deliver both ends of the shuttle out through the anterior portal. A semitendinosus allograft is used to reconstruct the coracoclavicular ligament. A nonabsorbable suture is passed through both ends of the allograft. Three strands of nonabsorbable suture are braided together. The tendon and the braided suture are shuttled around the coracoid. At this point, both the braided suture and the allograft tendon enter the anterior portal, wrap around the coracoid base, and exit the anterior portal. A 3-cm incision is made over the distal clavicle. A hole is drilled through the clavicle with a 5-mm drill. A loop of 22-gauge wire is passed through the hole in the clavicle, and a looped suture is shuttled through the hole. A curved clamp is used to create a tunnel from the acromioclavicular joint, under the deltoid, to the anterior portal. The ends of the braided suture and the tendon sutures are grasped by the clamp and pulled out the acromioclavicular joint incision. The limbs of the braided suture and the tendon suture that pass medial to the coracoid are shuttled through the hole in the clavicle using the looped suture that was previously passed through the clavicle. The acromioclavicular joint is reduced by pushing down on the distal clavicle with a bone tamp while simultaneously lifting the acromion upward by superiorly loading the humerus at the elbow. Once the acromioclavicular joint is reduced or slightly over-reduced, the braided suture is tied down securely. The acromioclavicular joint should remain reduced even after the manual reduction maneuver is released. The semitendinosus allograft is tensioned around the distal end of the clavicle and sutured to itself with a nonabsorbable suture. The released coracoacromial ligament is retrieved from the clavicular incision and sutured to the distal clavicle and semitendinosus allograft. The incision is closed in standard fashion, and a sling is applied.

Efficacy of Single-Suture Incision Closures in Tagged Juvenile Chinook Salmon Exposed to Simulated Turbine Passage

DOE Office of Scientific and Technical Information (OSTI.GOV)

Boyd, James W.; Deters, Katherine A.; Brown, Richard S.

2011-09-01

Reductions in the size of acoustic transmitters implanted in migrating juvenile salmonids have resulted in the use of a shorter incision-one that may warrant only a single suture for closure. However, it is not known whether a single suture will sufficiently hold the incision closed when fish are decompressed and when outward pressure is placed on the surgical site during turbine passage through hydroelectric dams. The objective of this study was to evaluate the effectiveness of single-suture incision closures on five response variables in juvenile Chinook salmon Oncorhynchus tshawytscha that were subjected to simulated turbine passage. An acoustic transmitter (0.43more » g in air) and a passive integrated transponder tag (0.10 g in air) were implanted in each fish; the 6-mm incisions were closed with either one suture or two sutures. After exposure to simulated turbine passage, none of the fish exhibited expulsion of transmitters. In addition, the percentage of fish with suture tearing, incision tearing, or mortal injury did not differ between treatments. Expulsion of viscera through the incision was higher among fish that received one suture (12%) than among fish that received two sutures (1%). The higher incidence of visceral expulsion through single-suture incisions warrants concern. Consequently, for cases in which tagged juvenile salmonidsmay be exposed to turbine passage, we do not recommend the use of one suture to close 6-mm incisions associated with acoustic transmitter implantation.« less

Performance Assessment of Suture Type, Water Temperature, and Surgeon Skill in Juvenile Chinook Salmon Surgically Implanted with Acoustic Transmitters

DOE Office of Scientific and Technical Information (OSTI.GOV)

Deters, Katherine A.; Brown, Richard S.; Carter, Kathleen M.

2010-05-01

This study assessed performance of seven suture types in subyearling Chinook salmon Oncorhynchus tshawytscha implanted with acoustic microtransmitters. Nonabsorbable (Ethilon) and absorbable (Monocryl) monofilament and nonabsorbable (Nurolon, silk) and absorbable (Vicryl, Vicryl Plus, Vicryl Rapide) braided sutures were used to close incisions in Chinook salmon. Monocryl exhibited greater suture retention than all other suture types 7 d after surgery. Both monofilament suture types were retained better than all braided suture types at 14 d. Incision openness and tag retention did not differ among suture types. Wound inflammation was similar for Ethilon, Monocryl, and Nurolon at 7 d. Wound ulceration wasmore » lower for Ethilon, Monocryl, and Nurolon than for all other suture types at 14 d post-surgery. Fish held in 12°C water had more desirable post-surgery healing characteristics (i.e., higher suture and tag retention and lower incision openness, wound inflammation, and ulceration) at 7 and 14 d after surgery than those held in 17°C water. The effect of surgeon was a significant predictor for all response variables at 7 d. This result emphasizes the importance of including surgeon as a variable in telemetry study analyses when multiple surgeons are used. Monocryl performed better with regard to post-surgery healing characteristics in the study fish. The overall results support the conclusion that Monocryl is the best suture material to close incisions created during surgical implantation of acoustic microtransmitters in subyearling Chinook salmon.« less

The B-Lynch uterine brace suture, and a bit of this and a bit of that...

PubMed

Karoshi, Mahantesh

2010-03-01

The widespread application of the B-Lynch brace suture to control postpartum hemorrhage has sparked interest in a variety of adjunctive methods, used alone or in combination, to control uterine bleeding. Although the B-Lynch brace suture has been used with good results throughout the world, failures can and do occur in rare instances, especially when the suture is incorrectly placed for use for an inappropriate indication. Four reports of additional methods to control postpartum hemorrhage are published in this issue of IJGO. Three use the B-Lynch brace suture combined with other techniques. The need for additional techniques reminds the reader of the importance of proper suture application for proper indication. Potential reasons for failure of the B-Lynch suture are provided.

Retropatellar chondromalacia associated with medial osteoarthritis after meniscus injury. One year of observations in sheep.

PubMed

Burger, C; Kabir, K; Mueller, M; Rangger, C; Minor, T; Tolba, R H

2006-01-01

In an ovine meniscal repair model, the patellofemoral (PF) osteoarthritis due to a non-sutured tear or failed repair was investigated. A radial meniscus tear was either sutured with polydioxanone (PDS), with a slow degrading polylactide long-term suture(LTS) or left without treatment. Knee joint cartilage in the PF and medial compartment was evaluated compared to normal knees (healthy controls). Retropatellar osteoarthritis in the non-sutured and sutured animals was intense in contrast to the control knees after 6 months in all groups (p < 0.001), and after 12 months in the PDS group (p < 0.001), LTS group and non-sutured animals (p < 0.05). Non-sutured meniscus tears and failed repair lead fast to intense PF osteoarthritis corresponding with tibial damage of the injured compartment.

Seismological Constraints on Lithospheric Evolution in the Appalachian Orogen

NASA Astrophysics Data System (ADS)

Fischer, K. M.; Hopper, E.; Hawman, R. B.; Wagner, L. S.

2017-12-01

Crust and mantle structures beneath the Appalachian orogen, recently resolved by seismic data from the EarthScope SESAME Flexible Array and Transportable Array, provide new constraints on the scale and style of the Appalachian collision and subsequent lithospheric evolution. In the southern Appalachians, imaging with Sp and Ps phases reveals the final (Alleghanian) suture between the crusts of Laurentia and the Gondwanan Suwannee terrane as a low angle (<15°) southward-dipping interface that soles into a flat-lying mid-crustal detachment. The suture location near the top of the crust coincides closely with the northern limit of the Suwannee terrane reconstructed from its lower Paleozoic shelf strata (Boote and Knapp, 2016). The observed suture geometry implies over 300 km of head-on shortening across a plate boundary structure similar in scale to the Himalayan mid-crustal detachment. While the suture and other structures from the Alleghanian collision are preserved in the upper and mid-crust, the lower crust and mantle lithosphere beneath this region have been significantly modified by later processes. Ps receiver functions, wavefield migration and SsPmp modeling reveal that crustal thickness reaches a maximum of 58 km (beneath high elevations in the Blue Ridge terrane) and decreases to 29-35 km (beneath lower elevations in the Carolina and Suwannee terranes). Given metamorphic estimates of unroofing (Duff and Kellogg, 2017) isostatic arguments indicate crustal thicknesses were 15-25 km larger at the end of the orogeny, indicating a thick crustal root across the region. The present-day residual crustal root beneath the Blue Ridge mountains is estimated to have a density contrast with the mantle of only 104±20 kg/m3. This value is comparable to other old orogens but lower than values typical of young or active orogens, indicating a loss of lower crustal buoyancy over time. At mantle depths, the negative shear velocity gradient that marks the transition from lithosphere to asthenosphere, as illuminated by Sp phases, varies across the Appalachian orogen. This boundary is shallow beneath the northeastern U.S. and in the zone of Eocene volcanism in Virginia, where low velocity anomalies occur in the upper mantle. These correlations suggest recent active lithosphere-asthenosphere interaction.

An option for delta-shaped gastroduodenostomy in totally laparoscopic distal gastrectomy for gastric cancer: A single-layer suturing technique for the stapler entry hole using knotless barbed sutures combined with the application of additional knotted sutures.

PubMed

Tokuhara, Takaya; Nakata, Eiji; Tenjo, Toshiyuki; Kawai, Isao; Kondo, Keisaku; Ueda, Hirofumi; Tomioka, Atsushi

2018-01-01

We report an option for delta-shaped gastroduodenostomy in totally laparoscopic distal gastrectomy (TLDG) for gastric cancer. We detail a single-layer suturing technique for the endoscopic linear stapler entry hole using knotless barbed sutures combined with the application of additional knotted sutures. From June 2013 to February 2017, we performed TLDG with delta-shaped gastroduodenostomy in 20 patients with gastric cancer. The linear stapler was closed and fired to attach the posterior walls of the remnant stomach and the duodenum together. After creating a good view of the greater curvature side of the entry hole for the stapler by retracting the knotted suture on the lesser curvature side toward the ventral side, we performed single-layer entire-thickness continuous suturing of this hole using a 15-cm-long barbed suture running from the greater curvature side to the lesser curvature side. We placed the second and third stitches between the seromuscular layer of the remnant stomach and the entire-thickness layer of the duodenum while suturing the duodenal mucosa as minutely as possible. In addition, we routinely added one or two entire-thickness knotted sutures at the site near the greater curvature side. We placed similar additional knotted sutures at the site with a broad pitch. TLDG with this reconstruction technique was successfully performed in all patients with no occurrences of anastomotic leakage or intraabdominal abscess around the anastomosis. It is suggested that this method can be one option for delta-shaped gastroduodenostomy in TLDG due to its cost-effectiveness and feasibility.

An option for delta-shaped gastroduodenostomy in totally laparoscopic distal gastrectomy for gastric cancer: A single-layer suturing technique for the stapler entry hole using knotless barbed sutures combined with the application of additional knotted sutures

PubMed Central

Tokuhara, Takaya; Nakata, Eiji; Tenjo, Toshiyuki; Kawai, Isao; Kondo, Keisaku; Ueda, Hirofumi; Tomioka, Atsushi

2018-01-01

We report an option for delta-shaped gastroduodenostomy in totally laparoscopic distal gastrectomy (TLDG) for gastric cancer. We detail a single-layer suturing technique for the endoscopic linear stapler entry hole using knotless barbed sutures combined with the application of additional knotted sutures. From June 2013 to February 2017, we performed TLDG with delta-shaped gastroduodenostomy in 20 patients with gastric cancer. The linear stapler was closed and fired to attach the posterior walls of the remnant stomach and the duodenum together. After creating a good view of the greater curvature side of the entry hole for the stapler by retracting the knotted suture on the lesser curvature side toward the ventral side, we performed single-layer entire-thickness continuous suturing of this hole using a 15-cm-long barbed suture running from the greater curvature side to the lesser curvature side. We placed the second and third stitches between the seromuscular layer of the remnant stomach and the entire-thickness layer of the duodenum while suturing the duodenal mucosa as minutely as possible. In addition, we routinely added one or two entire-thickness knotted sutures at the site near the greater curvature side. We placed similar additional knotted sutures at the site with a broad pitch. TLDG with this reconstruction technique was successfully performed in all patients with no occurrences of anastomotic leakage or intraabdominal abscess around the anastomosis. It is suggested that this method can be one option for delta-shaped gastroduodenostomy in TLDG due to its cost-effectiveness and feasibility. PMID:29375711

In vitro evaluation of novel antimicrobial coatings for surgical sutures using octenidine.

PubMed

Obermeier, A; Schneider, J; Föhr, P; Wehner, S; Kühn, K-D; Stemberger, A; Schieker, M; Burgkart, R

2015-09-24

Sutures colonized by bacteria represent a challenge in surgery due to their potential to cause surgical site infections. In order to reduce these type of infections antimicrobially coated surgical sutures are currently under development. In this study, we investigated the antimicrobial drug octenidine as a coating agent for surgical sutures. To achieve high antimicrobial efficacy and required biocompatibility for medical devices, we focused on optimizing octenidine coatings based on fatty acids. For this purpose, antimicrobial sutures were prepared with either octenidine-laurate or octenidine-palmitate at 11, 22, and 33 μg/cm drug concentration normalized per length of sutures. Octenidine containing sutures were compared to the commercial triclosan-coated suture Vicryl® Plus. The release of octenidine into aqueous solution was analyzed and long-term antimicrobial efficacy was assessed via agar diffusion tests using Staphylococcus aureus. For determining biocompatibility, cytotoxicity assays (WST-1) were performed using L-929 mouse fibroblasts. In a 7 days elution experiment, octenidine-palmitate coated sutures demonstrated much slower drug release (11 μg/cm: 7%; 22 μg/cm: 5%; 33 μg/cm: 33%) than octenidine-laurate sutures (11 μg/cm: 82%; 22 μg/cm: 88%; 33 μg/cm: 87%). Furthermore sutures at 11 μg/cm drug content were associated with acceptable cytotoxicity according to ISO 10993-5 standard and showed, similar to Vicryl® Plus, relevant efficacy to inhibit surrounding bacterial growth for up to 9 days. Octenidine coated sutures with a concentration of 11 μg/cm revealed high antimicrobial efficacy and biocompatibility. Due to their delayed release, palmitate carriers should be preferred. Such coatings are candidates for clinical testing in regard to their safety and efficacy.

Résultats fonctionnels des lésions des tendons fléchisseurs de la main: à propos de 90 cas

PubMed Central

Boussakri, Hassan; Azarkane, Mohamad; Elidrissi, Mohamad; Shimi, Mohamad; Elibrahimi, Abdelhalim; Elmrini, Abdelmajid

2013-01-01

Les auteurs rapportent une série de 90 patients, présentant une section tendineuse des fléchisseurs de la main, et suivis avec un recul moyen de 8 mois (min: 2 mois; max: 13 mois). La lésion était localisée dans 12% des cas en zone I, 46% des cas en zone II, 2% en zone III et 25% des cas en zone IV et V. Pour le pouce (13 patients), 10 cas en zone T2 et 3 cas en zone T3. La technique opératoire utilisée était les sutures tendineuses en cadre de Kessler modifié, associée à un surjet épitendineux. Nous avons obtenus 54% de très bons résultats, 34% de résultats moyens et 12% de mauvais résultats. Pour le pouce les résultats semble moins bons avec un taux de résultats médiocre de 48%. Certes les chiffres de cette série sont moins bons que ceux des autres séries publiées dans la littérature. Les facteurs influençant les résultats sont d'abord l'utilisation d'immobilisation postopératoire systématique ainsi que le mécanisme d'agression, et la localisation à la zone II et au pouce. Les complications mécaniques sont représentées par 7% de rupture, toutes au niveau de pouce, et 31% des adhérences tendineuses (soit 30 cas), dont 19 en zone II, l'infections (22%) et 4% des cas d'algodystrophies. PMID:23847698

Advances in Suture Material for Obstetric and Gynecologic Surgery

PubMed Central

Greenberg, James A; Clark, Rachel M

2009-01-01

Despite millennia of experience with wound closure biomaterials, no study or surgeon has yet identified the perfect suture for all situations. Tissue characteristics, tensile strength, reactivity, absorption rates, and handling properties should be taken into account when selecting a wound closure suture. This review discusses the wound healing process and the biomechanical properties of currently available suture materials to better understand how to choose suture material in obstetrics and gynecology. PMID:19826572

21 CFR 870.3460 - Endovascular Suturing System.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Endovascular Suturing System. 870.3460 Section 870...) MEDICAL DEVICES CARDIOVASCULAR DEVICES Cardiovascular Prosthetic Devices § 870.3460 Endovascular Suturing System. (a) Identification. An endovascular suturing system is a medical device intended to provide...

21 CFR 870.3460 - Endovascular Suturing System.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Endovascular Suturing System. 870.3460 Section 870...) MEDICAL DEVICES CARDIOVASCULAR DEVICES Cardiovascular Prosthetic Devices § 870.3460 Endovascular Suturing System. (a) Identification. An endovascular suturing system is a medical device intended to provide...

21 CFR 870.3460 - Endovascular Suturing System.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Endovascular Suturing System. 870.3460 Section 870...) MEDICAL DEVICES CARDIOVASCULAR DEVICES Cardiovascular Prosthetic Devices § 870.3460 Endovascular Suturing System. (a) Identification. An endovascular suturing system is a medical device intended to provide...

Ectocranial suture fusion in primates: pattern and phylogeny.

PubMed

Cray, James; Cooper, Gregory M; Mooney, Mark P; Siegel, Michael I

2014-03-01

Patterns of ectocranial suture fusion among Primates are subject to species-specific variation. In this study, we used Guttman Scaling to compare modal progression of ectocranial suture fusion among Hominidae (Homo, Pan, Gorilla, and Pongo), Hylobates, and Cercopithecidae (Macaca and Papio) groups. Our hypothesis is that suture fusion patterns should reflect their evolutionary relationship. For the lateral-anterior suture sites there appear to be three major patterns of fusion, one shared by Homo-Pan-Gorilla, anterior to posterior; one shared by Pongo and Hylobates, superior to inferior; and one shared by Cercopithecidae, posterior to anterior. For the vault suture pattern, the Hominidae groups reflect the known phylogeny. The data for Hylobates and Cercopithecidae groups is less clear. The vault suture site termination pattern of Papio is similar to that reported for Gorilla and Pongo. Thus, it may be that some suture sites are under larger genetic influence for patterns of fusion, while others are influenced by environmental/biomechanic influences. Copyright © 2013 Wiley Periodicals, Inc.

A new cryptic virus belonging to the family Partitiviridae was found in watermelon co-infected with Melon necrotic spot virus.

PubMed

Sela, Noa; Lachman, Oded; Reingold, Victoria; Dombrovsky, Aviv

2013-10-01

A novel virus was detected in watermelon plants (Citrullus lanatus Thunb.) infected with Melon necrotic spot virus (MNSV) using SOLiD next-generation sequence analysis. In addition to the expected MSNV genome, two double-stranded RNA (dsRNA) segments of 1,312 and 1,118 bp were also identified and sequenced from the purified virus preparations. These two dsRNA segments encode two putative partitivirus-related proteins, an RNA-dependent RNA polymerase (RdRP) and a capsid protein, which were sequenced. Genomic-sequence analysis and analysis of phylogenetic relationships indicate that these two dsRNAs together make up the genome of a novel Partitivirus. This virus was found to be closely related to the Pepper cryptic virus 1 and Raphanus sativus cryptic virus. It is suggested that this novel virus putatively named Citrullus lanatus cryptic virus be considered as a new member of the family Partitiviridae.

Gene-centric approach to integrating environmental genomics and biogeochemical models.

PubMed

Reed, Daniel C; Algar, Christopher K; Huber, Julie A; Dick, Gregory J

2014-02-04

Rapid advances in molecular microbial ecology have yielded an unprecedented amount of data about the evolutionary relationships and functional traits of microbial communities that regulate global geochemical cycles. Biogeochemical models, however, are trailing in the wake of the environmental genomics revolution, and such models rarely incorporate explicit representations of bacteria and archaea, nor are they compatible with nucleic acid or protein sequence data. Here, we present a functional gene-based framework for describing microbial communities in biogeochemical models by incorporating genomics data to provide predictions that are readily testable. To demonstrate the approach in practice, nitrogen cycling in the Arabian Sea oxygen minimum zone (OMZ) was modeled to examine key questions about cryptic sulfur cycling and dinitrogen production pathways in OMZs. Simulations support previous assertions that denitrification dominates over anammox in the central Arabian Sea, which has important implications for the loss of fixed nitrogen from the oceans. Furthermore, cryptic sulfur cycling was shown to attenuate the secondary nitrite maximum often observed in OMZs owing to changes in the composition of the chemolithoautotrophic community and dominant metabolic pathways. Results underscore the need to explicitly integrate microbes into biogeochemical models rather than just the metabolisms they mediate. By directly linking geochemical dynamics to the genetic composition of microbial communities, the method provides a framework for achieving mechanistic insights into patterns and biogeochemical consequences of marine microbes. Such an approach is critical for informing our understanding of the key role microbes play in modulating Earth's biogeochemistry.

Reattachment of flexor digitorum profundus avulsion: biomechanical performance of 3 techniques.

PubMed

Brar, Ravinder; Owen, John R; Melikian, Raymond; Gaston, R Glenn; Wayne, Jennifer S; Isaacs, Jonathan E

2014-11-01

To investigate whether inclusion of the volar plate in repair of flexor digitorum profundus avulsions increases the strength of the repair and resists gapping. Cadaveric fingers (n = 18) were divided into 3 equal groups. The first technique involved 2 micro-suture anchors only (A). The second used only volar plate repair (VP). The third group was a hybrid, combining a micro-suture anchor with volar plate augmentation (AVP). Specimens were loaded cyclically to simulate passive motion rehabilitation before being loaded to failure. Clinical failure was defined as 3 mm of gapping, and physical failure as the highest load associated with hardware failure, suture breakage, anchor pullout, or volar plate avulsion. Gapping throughout cycling was significantly greater for the A group than VP and AVP with no difference detected between VP and AVP groups. Gapping exceeded 3 mm during cycling of 3 A specimens, but in none of the VP or AVP specimens. Load at clinical and physical failure for A was significantly lower than for VP and AVP, whereas no difference was detected between VP and AVP. In this cadaveric model, incorporating the volar plate conferred a significant advantage in strength, increasing the mean load to physical failure by approximately 100 N. According to previous biomechanical studies, current reconstructive strategies for flexor digitorum profundus zone I avulsions are not strong enough to withstand active motion rehabilitation. We demonstrated the potential use of volar plate augmentation and the prospective advantageous increase in strength in this cadaveric model. In vivo performance and effects on digital motion are not known. Copyright © 2014 American Society for Surgery of the Hand. Published by Elsevier Inc. All rights reserved.

Sclera-directed knot technique for securing an encircling band in retinal surgery.

PubMed

Bartov, E; Ginsburg, L H; Ashkenazi, I; Treister, G

1991-10-01

The protruding ends of sutures used to secure the ends of the silicone rubber band placed during many retinal surgical procedures may cause postsurgical irritation, since with presently used suturing techniques, the knot of the suture remains on top of the band, facing the conjunctiva. We describe a suturing technique which, by inverting the band when suturing its ends and then allowing the band to return to its original position, places the knot on the undersurface of the band, against the sclera. Thus, no protruding suture ends are left facing the conjunctiva and the irritation resulting from such a protrusion is averted.

Mechanical model of suture joints with fibrous connective layer

NASA Astrophysics Data System (ADS)

Miroshnichenko, Kateryna; Liu, Lei; Tsukrov, Igor; Li, Yaning

2018-02-01

A composite model for suture joints with a connective layer of aligned fibers embedded in soft matrix is proposed. Based on the principle of complementary virtual work, composite cylinder assemblage (CCA) approach and generalized self-consistent micro-mechanical models, a hierarchical homogenization methodology is developed to systematically quantify the synergistic effects of suture morphology and fiber orientation on the overall mechanical properties of sutures. Suture joints with regular triangular wave-form serve as an example material system to apply this methodology. Both theoretical and finite element mechanical models are developed and compared to evaluate the overall normal stiffness of sutures as a function of wavy morphology of sutures, fiber orientation, fiber volume fraction, and the mechanical properties of fibers and matrix in the interfacial layer. It is found that generally due to the anisotropy-induced coupling effects between tensile and shear deformation, the effective normal stiffness of sutures is highly dependent on the fiber orientation in the connective layer. Also, the effective shear modulus of the connective layer and the stiffness ratio between the fiber and matrix significantly influence the effects of fiber orientation. In addition, optimal fiber orientations are found to maximize the stiffness of suture joints.

Histological analysis of the repair of dural lesions with silicone mesh in rats subjected to experimental lesions

PubMed Central

da Rosa, Fernando William Figueiredo; Pohl, Pedro Henrique Isoldi; Mader, Ana Maria Amaral Antônio; de Paiva, Carla Peluso; dos Santos, Aline Amaro; Bianco, Bianca; Rodrigues, Luciano Miller Reis

2015-01-01

ABSTRACT Objective To evaluate inflammatory reaction, fibrosis and neovascularization in dural repairs in Wistar rats using four techniques: simple suture, bovine collagen membrane, silicon mesh and silicon mesh with suture. Methods Thirty Wistar rats were randomized in five groups: the first was the control group, submitted to dural tear only. The others underwent durotomy and simple suture, bovine collagen membrane, silicon mesh and silicon mesh with suture. Animals were euthanized and the spine was submitted to histological evaluation with a score system (ranging from zero to 3) for inflammation, neovascularization and fibrosis. Results Fibrosis was significantly different between simple suture and silicon mesh (p=0.005) and between simple suture and mesh with suture (p=0.015), showing that fibrosis is more intense when a foreign body is used in the repair. Bovine membrane was significantly different from mesh plus suture (p=0.011) regarding vascularization. Inflammation was significantly different between simple suture and bovine collagen membrane. Conclusion Silicon mesh, compared to other commercial products available, is a possible alternative for dural repair. More studies are necessary to confirm these findings. PMID:26761555

[Reaction of the fibrose eyeball covering upon the suture material synthetic and absorbable "Dexon". (Experimental study) (author's transl)].

PubMed

Olah, Z

1979-11-01

The present paper deals with the results of 20 eyes of experimentally operated laboratory animals, whose perforating wounds (of cornea and those of sclerocorneal region) have been suturated with a new type of absorbable synthetic suture material "Dexon" thickness being 6-0. The synthetic absorbable suture material "Dexon" is made of polyglycol acid, and it has been introduced to market by the firm Davis and Geck (U.S.A.). The inflammatory tissue reaction to the presence of the suture material "Dexon" is prominent and can by compared to the reaction to chromic resorbable suture materials (catgut or collagen). The suture material "Dexon" start to resorb in the course of the 2nd-3rd weeks after operation. The suture material "Dexon" can be used at an advantage in the operation where it is possible to cover the knots by a conjuctival lobe (in sclerocorneal region or in strabismus surgery) in this way the tendency to overgrowing of epithelial cells along the suture channels can be prevented. The "Dexon" material is sufficiently flexible and firm and has no antigenic properties, therefore it appears very prospective for ophthalmosurgery.

Effect of human urine on the tensile strength of sutures used for hypospadias surgery.

PubMed

Kerstein, Ryan L; Sedaghati, Tina; Seifalian, Alexander M; Kang, Norbert

2013-06-01

Hypospadias is the most common congenital condition affecting between 1 in 250 and 300 live births. Even in experienced hands, surgery to repair this congenital defect can have a high complication rate. Wound dehiscence is reported to occur in 5% and fistula formation in 6%-40% depending on technique. The choice of suture material has been shown to affect the complication rate although there is (currently) no consensus about the best suture material to use. Ideally, the sutures used for urethroplasty should be absorbable while maintaining sufficient mechanical strength to support the wounds until they are self-supporting and able to resist urinary flow. Previous studies have compared the effects of human urine on different suture materials especially catgut. However, catgut is now banned in Europe. Our study examined the tensile and breaking strength as well as rate of degradation for four types of absorbable suture now commonly used for hypospadias repairs in the UK. We examined the effect of prolonged storage (up to 27 days) in human urine on 6/0 gauge Vicryl, Vicryl Rapide, Monocryl and polydioxanone (PDS) sutures. These four suture materials are commonly used by the senior plastic consultant surgeon (NK) for hypospadias repairs. 50 mm sections of these suture materials were stored in either urine or saline as control. At specified time points, each suture was placed in a uniaxial load testing machine to assess the stress-strain profile and the mechanical load required to break the suture was measured. Exposure to urine reduced the tensile and breaking strength of all the suture materials tested. PDS demonstrated the greatest resilience. Vicryl Rapide was the weakest suture and degraded completely by day 6. Vicryl and Monocryl had similar degradation profiles, but Vicryl retained more of its tensile strength for longer. There is a balance to be struck between the duration that a suture material must remain in any surgical wound and the risk that it causes foreign body effects. The results of this study suggest that Vicryl has the best characteristics for urethroplasty of the four suture materials tested. Copyright © 2013 British Association of Plastic, Reconstructive and Aesthetic Surgeons. Published by Elsevier Ltd. All rights reserved.

Intracorporeal suturing: Transfer from Fundamentals of Laparoscopic Surgery to cadavers results in substantial increase in mental workload.

PubMed

Britt, Rebecca C; Scerbo, Mark W; Montano, Michael; Kennedy, Rebecca A; Prytz, Erik; Stefanidis, Dimitrios

2015-11-01

A spatial secondary task developed by the authors was used to measure the mental workload of the participant when transferring suturing skills from a box simulator to more realistic surgical conditions using a fresh cadaver. We hypothesized that laparoscopic suturing on genuine bowel would be more challenging than on the Fundamentals of Laparoscopic Surgery (FLS)-simulated bowel as reflected in differences on both suturing and secondary task scores. We trained 14 surgical assistant students to FLS proficiency in intracorporeal suturing. Participants practiced suturing on the FLS box for 30 minutes and then were tested on both the FLS box and the bowel of a fresh cadaver using the spatial, secondary dual-task conditions developed by the authors. Suturing times increased by >333% when moving from the FLS platform to the cadaver F(1,13) = 44.04, P < .001. The increased completion times were accompanied by a 70% decrease in secondary task scores, F(1,13) = 21.21, P < .001. The mental workload associated with intracorporeal suturing increases dramatically when trainees transfer from the FLS platform to human tissue under more realistic conditions of suturing. The increase in mental workload is indexed by both an increase in suturing times and a decrease in the ability to attend to the secondary task. Copyright © 2015 Elsevier Inc. All rights reserved.

Accurate population genetic measurements require cryptic species identification in corals

NASA Astrophysics Data System (ADS)

Sheets, Elizabeth A.; Warner, Patricia A.; Palumbi, Stephen R.

2018-06-01

Correct identification of closely related species is important for reliable measures of gene flow. Incorrectly lumping individuals of different species together has been shown to over- or underestimate population differentiation, but examples highlighting when these different results are observed in empirical datasets are rare. Using 199 single nucleotide polymorphisms, we assigned 768 individuals in the Acropora hyacinthus and A. cytherea morphospecies complexes to each of eight previously identified cryptic genetic species and measured intraspecific genetic differentiation across three geographic scales (within reefs, among reefs within an archipelago, and among Pacific archipelagos). We then compared these calculations to estimated genetic differentiation at each scale with all cryptic genetic species mixed as if we could not tell them apart. At the reef scale, correct genetic species identification yielded lower F ST estimates and fewer significant comparisons than when species were mixed, raising estimates of short-scale gene flow. In contrast, correct genetic species identification at large spatial scales yielded higher F ST measurements than mixed-species comparisons, lowering estimates of long-term gene flow among archipelagos. A meta-analysis of published population genetic studies in corals found similar results: F ST estimates at small spatial scales were lower and significance was found less often in studies that controlled for cryptic species. Our results and these prior datasets controlling for cryptic species suggest that genetic differentiation among local reefs may be lower than what has generally been reported in the literature. Not properly controlling for cryptic species structure can bias population genetic analyses in different directions across spatial scales, and this has important implications for conservation strategies that rely on these estimates.

A new surgical technique using steel suture for trans-scleral fixation of posterior chamber intraocular lenses

PubMed Central

Ram, Jagat; Gupta, Nishant; Chaudhary, Manish; Verma, Neelam

2013-01-01

Background: A new emerging complication of trans-scleral fixation of posterior chamber (PC) intraocular lens (IOL) with polypropylene suture is high rates of spontaneous dislocation of the IOL due to disintegration or breakage of suture. Materials: We report a new surgical technique of trans-scleral fixation of posterior chamber intraocular lens (SF PCIOL) with steel suture to eliminate the complication of dislocation of IOL fixed with polypropylene suture in one adult and a child. Results: We successfully achieved stable fixation and good centration of IOL after SF PCIOL with steel suture in these patient having inadequate posterior capsular support. Both eyes achieved best corrected visual acuity 20/40 at 18 months follow-up. Conclusions: Steel suture is a viable option for trans-scleral fixation of posterior chamber intraocular lens. PMID:23619504

Development of a needle driver with multiple degrees of freedom for neonatal laparoscopic surgery.

PubMed

Ishimaru, Tetsuya; Takazawa, Shinya; Uchida, Hiroo; Kawashima, Hiroshi; Fujii, Masahiro; Harada, Kanako; Sugita, Naohiko; Mitsuishi, Mamoru; Iwanaka, Tadashi

2013-07-01

The aims of this study were to develop a thin needle driver with multiple degrees of freedom and to evaluate its efficacy in multidirectional suturing compared with a conventional needle driver. The tip (15 mm) of the novel user-friendly needle driver (3.5 mm in diameter) has three degrees of freedom for grasping, rotation, and deflection. Six pediatric surgeons performed two kinds of suturing tasks in a dry box: three stitches in continuous suturing that were perpendicular or parallel to the insertion direction of the instrument, first using the novel instrument, then using a conventional instrument, and finally using the novel instrument again. The accuracy of insertion and exit compared with the target points and the procedure time were measured. In the conventional and novel procedures the mean gaps from the insertion point to the target in perpendicular suturing were 0.8 mm and 0.7 mm, respectively; in parallel suturing they were 0.8 mm and 0.6 mm, respectively. The mean gaps from the exit point to the target in perpendicular suturing were 0.6 mm and 0.6 mm for conventional and novel procedures, respectively; in parallel suturing they were 0.6 mm and 0.8 mm, respectively. The procedure time for perpendicular suturing was 33 seconds and 64 seconds for conventional and novel procedures, respectively (P=.02); for parallel suturing it was 114 seconds and 91 seconds, respectively. Our novel needle driver maintained accuracy of suturing; parallel suturing with the novel driver may be easier than with the conventional one.

Strain in the Braincase and Its Sutures During Function

PubMed Central

Herring, Susan W.; Teng, Shengyi

2010-01-01

The skull is distinguished from other parts of the skeleton by its composite construction. The sutures between bony elements provide for interstitial growth of the cranium, but at the same time they alter the transmission of stress and strain through the skull. Strain gages were bonded to the frontal and parietal bones of miniature pigs and across the interfrontal, interparietal and coronal sutures. Strains were recorded 1) during natural mastication in conjunction with electromyographic activity from the jaw muscles and 2) during stimulation of various cranial muscles in anesthetized animals. Vault sutures exhibited vastly higher strains than did the adjoining bones. Further, bone strain primarily reflected torsion of the braincase set up by asymmetrical muscle contraction; the tensile axis alternated between +45° and −45° depending on which diagonal masseter/temporalis pair was most active. However, suture strains were not related to overall torsion but instead were responses to local muscle actions. Only the coronal suture showed significant strain (tension) during jaw opening; this was caused by the contraction of neck muscles. All sutures showed strain during jaw closing, but polarity depended on the pattern of muscle usage. For example, masseter contraction tensed the coronal suture and the anterior part of the interfrontal suture, whereas the temporalis caused compression in these locations. Peak tensile strains were larger than peak compressive strains. Histology suggested that the skull is bent at the sutures, with the ectocranial surface tensed and the endocranial surface predominantly compressed. Collectively, these results indicate that skulls with patent sutures should be analyzed as complexes of independent parts rather than solid structures. PMID:10918130

Sequential selective same-day suture removal in the management of post-keratoplasty astigmatism

PubMed Central

Fares, U; Mokashi, A A; Elalfy, M S; Dua, H S

2013-01-01

Aims In a previous study, we proposed that corneal topography performed 30–40 min after the initial suture removal can identify the next set of sutures requiring removal, for the treatment of post-keratoplasty astigmatism. The aim of this study was to evaluate the effect of removing subsequent sets of sutures at the same sitting. Methods 10/0 nylon interrupted sutures were placed, to secure the graft–host junction, at the time of keratoplasty. Topography was performed using Pentacam (Oculus) before suture removal. The sutures to be removed in the steep semi-meridians were identified and removed at the slit-lamp biomicroscope. Topography was repeated 30–40 min post suture removal, the new steep semi-meridians determined, and the next set of sutures to be removed were identified and removed accordingly. Topography was repeated 4–6 weeks later and the magnitude of topographic astigmatism was recorded. A paired-samples t-test was used to evaluate the impact of selective suture removal on reducing the magnitude of topographic and refractive astigmatism. Results Twenty eyes of 20 patients underwent sequential selective same-day suture removal (SSSS) after corneal transplantation. This study showed that the topographic astigmatism decreased by about 46.7% (3.68 D) and the refractive astigmatism decreased by about 37.7% (2.61 D) following SSSS. Vector calculations also show a significant reduction of both topographic and refractive astigmatism (P<0.001). Conclusion SSSS may help patients to achieve satisfactory vision more quickly and reduce the number of follow-up visits required post keratoplasty. PMID:23743526

An economic model: value of antimicrobial-coated sutures to society, hospitals, and third-party payers in preventing abdominal surgical site infections.

PubMed

Singh, Ashima; Bartsch, Sarah M; Muder, Robert R; Lee, Bruce Y

2014-08-01

While the persistence of high surgical site infection (SSI) rates has prompted the advent of more expensive sutures that are coated with antimicrobial agents to prevent SSIs, the economic value of such sutures has yet to be determined. Using TreeAge Pro, we developed a decision analytic model to determine the cost-effectiveness of using antimicrobial sutures in abdominal incisions from the hospital, third-party payer, and societal perspectives. Sensitivity analyses systematically varied the risk of developing an SSI (range, 5%-20%), the cost of triclosan-coated sutures (range, $5-$25/inch), and triclosan-coated suture efficacy in preventing infection (range, 5%-50%) to highlight the range of costs associated with using such sutures. Triclosan-coated sutures saved $4,109-$13,975 (hospital perspective), $4,133-$14,297 (third-party payer perspective), and $40,127-$53,244 (societal perspective) per SSI prevented, when a surgery had a 15% SSI risk, depending on their efficacy. If the SSI risk was no more than 5% and the efficacy in preventing SSIs was no more than 10%, triclosan-coated sutures resulted in extra expenditure for hospitals and third-party payers (resulting in extra costs of $1,626 and $1,071 per SSI prevented for hospitals and third-party payers, respectively; SSI risk, 5%; efficacy, 10%). Our results suggest that switching to triclosan-coated sutures from the uncoated sutures can both prevent SSIs and save substantial costs for hospitals, third-party payers, and society, as long as efficacy in preventing SSIs is at least 10% and SSI risk is at least 10%.

Pullout strength of cement-augmented and wide-suture transosseous fixation in the greater tuberosity.

PubMed

Shi, Brendan Y; Diaz, Miguel; Belkoff, Stephen M; Srikumaran, Uma

2017-12-01

Obtaining strong fixation in low-density bone is increasingly critical in surgical repair of rotator cuff tears because of the aging population. To evaluate two new methods of improving pullout strength of transosseous rotator cuff repair in low-density bone, we analyzed the effects of 1) using 2-mm suture tape instead of no. 2 suture and 2) augmenting the lateral tunnel with cement. Eleven pairs of osteopenic or osteoporotic cadaveric humeri were identified by dual-energy x-ray absorptiometry. One bone tunnel and one suture were placed in the heads of 22 specimens. Five randomly selected pairs were repaired with no. 2 suture; the other six pairs were repaired with 2-mm suture tape. One side of each pair received lateral tunnel cement augmentation. Specimens were tested to suture pullout. Data were fitted to multivariate models that accounted for bone mineral density and other specimen characteristics. Two specimens were excluded because of knot-slipping during testing. Use of suture tape versus no. 2 suture conferred a 75-N increase (95% CI: 37, 113) in pullout strength (P<0.001). Cement augmentation conferred a 42-N improvement (95% CI: 10, 75; P=0.011). Other significant predictors of pullout strength were age, sex, and bone mineral density. We show two methods of improving the fixation strength of transosseous rotator cuff repairs in low-density bone: using 2-mm suture tape instead of no. 2 suture and augmenting the lateral tunnel with cement. These methods may improve the feasibility of transosseous repairs in an aging patient population. Copyright © 2017 Elsevier Ltd. All rights reserved.

Comparing the Tolerability of a Novel Wound Closure Device Using a Porcine Wound Model

PubMed Central

Townsend, Katy L.; Akeroyd, Jen; Russell, Duncan S.; Kruzic, Jamie J.; Robertson, Bria L.; Lear, William

2018-01-01

Objective: To compare the tolerability and mechanical tensile strength of acute skin wounds closed with nylon suture plus a novel suture bridge device (SBD) with acute skin wounds closed with nylon suture in a porcine model. Approach: Four Yucatan pigs each received 12 4.5 cm full-thickness incisions that were closed with 1 of 4 options: Suture bridge with nylon, suture bridge with nylon and subdermal polyglactin, nylon simple interrupted, and nylon simple interrupted with subdermal polyglactin. Epithelial reaction, inflammation, and scarring were examined histologically at days 10 and 42. Wound strength was examined mechanically at days 10 and 42 on ex vivo wounds from euthanized pigs. Results: Histopathology in the suture entry/exit planes showed greater dermal inflammation with a simple interrupted nylon suture retained for 42 days compared with the SBD retained for 42 days (p < 0.03). While tensile wound strength in the device and suture groups were similar at day 10, wounds closed with the devices were nearly 8 times stronger at day 42 compared with day 10 (p < 0.001). Innovation: A novel SBD optimized for cutaneous wound closure that protects the skin surface from suture strands, forms a protective bridge over the healing wound edges, and knotlessly clamps sutures. Conclusion: This study suggests that the use of a SBD increases the tolerability of nylon sutures in porcine acute skin wound closures allowing for prolonged mechanical support of the wound. For slow healing wounds, this may prevent skin wound disruption, such as edge necrosis and dehiscence. PMID:29892494

Sequential selective same-day suture removal in the management of post-keratoplasty astigmatism.

PubMed

Fares, U; Mokashi, A A; Elalfy, M S; Dua, H S

2013-09-01

In a previous study, we proposed that corneal topography performed 30-40 min after the initial suture removal can identify the next set of sutures requiring removal, for the treatment of post-keratoplasty astigmatism. The aim of this study was to evaluate the effect of removing subsequent sets of sutures at the same sitting. 10/0 nylon interrupted sutures were placed, to secure the graft-host junction, at the time of keratoplasty. Topography was performed using Pentacam (Oculus) before suture removal. The sutures to be removed in the steep semi-meridians were identified and removed at the slit-lamp biomicroscope. Topography was repeated 30-40 min post suture removal, the new steep semi-meridians determined, and the next set of sutures to be removed were identified and removed accordingly. Topography was repeated 4-6 weeks later and the magnitude of topographic astigmatism was recorded. A paired-samples t-test was used to evaluate the impact of selective suture removal on reducing the magnitude of topographic and refractive astigmatism. Twenty eyes of 20 patients underwent sequential selective same-day suture removal (SSSS) after corneal transplantation. This study showed that the topographic astigmatism decreased by about 46.7% (3.68 D) and the refractive astigmatism decreased by about 37.7% (2.61 D) following SSSS. Vector calculations also show a significant reduction of both topographic and refractive astigmatism (P<0.001). SSSS may help patients to achieve satisfactory vision more quickly and reduce the number of follow-up visits required post keratoplasty.

Shock Condition Forensics and Cryptic Phase Transformations from Crystallographic Orientation Relationships in Zircon

NASA Astrophysics Data System (ADS)

Timms, N. E.; Erickson, T. M.; Cavosie, A. J.; Pearce, M. A.; Reddy, S. M.; Zanetti, M.; Tohver, E.; Schmieder, M.; Nemchin, A. A.; Wittmann, A.

2016-08-01

We present an approach to constrain pressure and temperature conditions during impact events involving identification of cryptic histories of phase transformations from orientation relationships in shocked zircon, linked to new P-T phase diagrams.

21 CFR 878.4830 - Absorbable surgical gut suture.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Absorbable surgical gut suture. 878.4830 Section 878.4830 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES... surgical gut suture. (a) Identification. An absorbable surgical gut suture, both plain and chromic, is an...

The earliest low and high δ18O caldera-forming eruptions of the Yellowstone plume: Implications for the 30-40 Ma Oregon calderas and speculations on plume-triggered delaminations

NASA Astrophysics Data System (ADS)

Seligman, Angela; Bindeman, Ilya; McClaughry, Jason; Stern, Richard; Fisher, Chris

2014-11-01

We present new isotopic and trace element data for four eruptive centers in Oregon: Wildcat Mountain (40 Ma), Crooked River (32-28 Ma), Tower Mountain (32 Ma), and Mohawk River (32 Ma). The first three calderas are located too far east to be sourced through renewed subduction of the Farallon slab following accretion of the Yellowstone-produced Siletzia terrane at ~50 Ma. Basalts of the three eastern eruptive centers yield high Nb/Yb and Th/Yb ratios, indicating an enriched sublithospheric mantle source, while Mohawk River yields trace element and isotopic (δ18O and ɛHf) values that correlate with its location above a subduction zone. The voluminous rhyolitic tuffs and lavas of Crooked River (41 x 27 km) have δ18Ozircon values that include seven low δ18Ozircon units (1.8-4.5 ‰), one high δ18Ozircon unit (7.4-8.8 ‰), and two units with heterogeneous zircons (2.0-9.0 ‰), similar to younger Yellowstone-Snake River Plain rhyolites. In order to produce these low δ18O values, a large heat source, widespread hydrothermal circulation, and repeated remelting are all required. In contrast, Wildcat Mountain and Tower Mountain rocks yield high δ18Ozircon values (6.4-7.9 ‰) and normal to low ɛHfi values (5.2-12.6), indicating crustal melting of high-δ18O supracrustal rocks. We propose that these calderas were produced by the first appearance of the Yellowstone plume east of the Cascadia subduction zone, which is supported by plate reconstructions that put the Yellowstone plume under Crooked River at 32-28 Ma. Given the eastern location of these calderas along the suture of the accreted Siletzia terrane and North America, we suggest that the Yellowstone hotspot is directly responsible for magmatism at Crooked River, and for plume-assisted delamination of portions of the edge of the Blue Mountains that produced the Tower Mountain magmas, while the older Wildcat Mountain magmas are related to suture zone instabilities that were created following accretion of the Siletzia terrane.

Formation and inversion of transtensional basins in the western part of the Lachlan Fold Belt, Australia, with emphasis on the Cobar Basin

NASA Astrophysics Data System (ADS)

Glen, R. A.

The Palaeozoic history of the western part of the Lachlan Fold Belt in New South Wales was dominated by strike-slip tectonics. In the latest Silurian to late Early Devonian, an area of crust >25,000 km 2 lying west of the Gilmore Suture underwent regional sinistral transtension, leading to the development of intracratonic successor basins, troughs and flanking shelves. The volcaniclastic deep-water Mount Hope Trough and Rast Trough, the siliciclastic Cobar Basin and the volcanic-rich Canbelego-Mineral Hill Belt of the Kopyje Shelf all were initiated around the Siluro-Devonian boundary. They all show clear evidence of having evolved by both active syn-rift processes and passive later post-rift (sag-phase) processes. Active syn-rift faulting is best documented for the Cobar Basin and Mount Hope Trough. In the former case, the synchronous activity on several fault sets suggests that the basin formed by sinistral transtension in response to a direction of maximum extension oriented NE-SW. Structures formed during inversion of the Cobar Basin and Canbelego-Mineral Hill Belt indicate closure under a dextral transpressive strain regime, with a far-field direction of maximum shortening oriented NE-SW. In the Cobar Basin, shortening was partitioned into two structural zones. A high-strain zone in the east was developed into a positive half-flower structure by re-activation of early faults and by formation of short-cut thrusts, some with strike-slip movement, above an inferred steep strike-slip fault. Intense subvertical cleavage, a steep extension lineation and variably plunging folds are also present. A lower-strain zone to the west developed by syn-depositional faults being activated as thrusts soling into a gently dipping detachment. A subvertical cleavage and steep extension lineation are locally present, and variably plunging folds are common. Whereas Siluro-Devonian basin-opening appeared to be synchronous in the western part of the fold belt, the different period of basin inversion in the Cobar region (late Early Devonian and Carboniferous) may reflect different movement histories on the master strike-slip faults in this part of the fold belt, the Gilmore Suture and Kiewa Fault.

Crustal inheritance and arc magmatism: Magnetotelluric constraints from the Washington Cascades on top-down control

NASA Astrophysics Data System (ADS)

Bedrosian, P.; Peacock, J.; Bowles-martinez, E.; Schultz, A.; Hill, G.

2017-12-01

Worldwide, arc volcanism occurs along relatively narrow magmatic arcs, the locations of which are considered to mark the onset of dehydration reactions within the subducting slab. This `bottom-up' approach, in which the location of arc volcanism reflects where fluids and melt are generated, explains first-order differences in trench-to-arc distance and is consistent with known variations in the thermal structure and geometry of subducting slabs. At a finer scale, arc segmentation, magmatic gaps, and anomalous forearc and backarc magmatism are also frequently interpreted in terms of variations in slab geometry, composition, or thermal structure.The role of inherited crustal structure in controlling faulting and deformation is well documented; less well examined is the role of crustal structure in controlling magmatism. While the source distribution of melt and subduction fluids is critical to determining the location of arc magmatism, we argue that crustal structure provides `top-down' control on patterns or seismicity and deformation as well as the channeling and ascent of arc magmas. We present evidence within the Washington Cascades based upon correlation between a new three-dimensional resistivity model, potential-field data, seismicity, and Quaternary volcanism. We image a mid-Tertiary batholith, intruded within an Eocene crustal suture zone, and extending throughout much of the crustal column. This and neighboring plutons are interpreted to channel crustal fluids and melt along their margins within steeply dipping zones of marine to transitional metasedimentary rock. Mount St. Helens is interpreted to be fed by fluids and melt generated further east at greater slab depths, migrating laterally (underplating?) beneath the Spirit Lake batholith, and ascending through metasedimentary rocks within the brittle crust. At a regional scale, we argue that this concealed suture zone controls present-day deformation and seismicity as well as the distribution of forearc magmatism. More generally, our results highlight the control that inherited crustal structure has on both the location and style of arc magmatism. We also address divergent interpretations of the Southern Washington Cascades Conductor, which we show results from limited data density and modeling assumptions in previous studies.

Geochronology of plutonic rocks and their tectonic terranes in Glacier Bay National Park and Preserve, southeast Alaska: Chapter E in Studies by the U.S. Geological Survey in Alaska, 2008-2009

USGS Publications Warehouse

Brew, David A.; Tellier, Kathleen E.; Lanphere, Marvin A.; Nielsen, Diane C.; Smith, James G.; Sonnevil, Ronald A.

2014-01-01

We have identified six major belts and two nonbelt occurrences of plutonic rocks in Glacier Bay National Park and Preserve and characterized them on the basis of geologic mapping, igneous petrology, geochemistry, and isotopic dating. The six plutonic belts and two other occurrences are, from oldest to youngest: (1) Jurassic (201.6–145.5 Ma) diorite and gabbro of the Lituya belt; (2) Late Jurassic (161.0–145.5 Ma) leucotonalite in Johns Hopkins Inlet; (3) Early Cretaceous (145.5–99.6 Ma) granodiorite and tonalite of the Muir-Chichagof belt; (4) Paleocene tonalite in Johns Hopkins Inlet (65.5–55.8 Ma); (5) Eocene granodiorite of the Sanak-Baranof belt; (6) Eocene and Oligocene (55.8–23.0 Ma) granodiorite, quartz diorite, and granite of the Muir-Fairweather felsic-intermediate belt; (7) Eocene and Oligocene (55.8–23.0 Ma) layered gabbros of the Crillon-La Perouse mafic belt; and (8) Oligocene (33.9–23.0 Ma) quartz monzonite and quartz syenite of the Tkope belt. The rocks are further classified into 17 different combination age-compositional units; some younger belts are superimposed on older ones. Almost all these plutonic rocks are related to Cretaceous and Tertiary subduction events. The six major plutonic belts intrude the three southeast Alaska geographic subregions in Glacier Bay National Park and Preserve, from west to east: (1) the Coastal Islands, (2) the Tarr Inlet Suture Zone (which contains the Border Ranges Fault Zone), and (3) the Central Alexander Archipelago. Each subregion includes rocks assigned to one or more tectonic terranes. The various plutonic belts intrude different terranes in different subregions. In general, the Early Cretaceous plutons intrude rocks of the Alexander and Wrangellia terranes in the Central Alexander Archipelago subregion, and the Paleogene plutons intrude rocks of the Chugach, Alexander, and Wrangellia terranes in the Coastal Islands, Tarr Inlet Suture Zone, and Central Alexander Archipelago subregions.

U-Pb zircon geochronology of the Paleogene - Neogene volcanism in the NW Anatolia: Its implications for the Late Mesozoic-Cenozoic geodynamic evolution of the Aegean

NASA Astrophysics Data System (ADS)

Ersoy, E. Yalçın; Akal, Cüneyt; Genç, Ş. Can; Candan, Osman; Palmer, Martin R.; Prelević, Dejan; Uysal, İbrahim; Mertz-Kraus, Regina

2017-10-01

The northern Aegean region was shaped by subduction, obduction, collision, and post-collisional extension processes. Two areas in this region, the Rhodope-Thrace-Biga Peninsula to the west and Armutlu-Almacık-Nallıhan (the Central Sakarya) to the east, are characterized by extensive Eocene to Miocene post-collisional magmatic associations. We suggest that comparison of the Cenozoic magmatic events of these two regions may provide insights into the Late Mesozoic to Cenozoic tectonic evolution of the Aegean. With this aim, we present an improved Cenozoic stratigraphy of the Biga Peninsula derived from a new comprehensive set of U-Pb zircon age data obtained from the Eocene to Miocene volcanic units in the region. The compiled radiometric age data show that calc-alkaline volcanic activity occurred at 43-15 Ma in the Biga Peninsula, 43-17 Ma in the Rhodope and Thrace regions, and 53-38 Ma in the Armutlu-Almacık-Nallıhan region, which are slightly overlapping. We discuss the possible cause for the distinct Cenozoic geodynamic evolution of the eastern and western parts of the region, and propose that the Rhodope, Thrace and Biga regions in the north Aegean share the same Late Mesozoic to Cenozoic geodynamic evolution, which is consistent with continuous subduction, crustal accretion, southwestward trench migration and accompanying extension; all preceded by the Late Cretaceous - Paleocene collision along the Vardar suture zone. In contrast, the Armutlu-Almacık-Nallıhan region was shaped by slab break-off and related processes following the Late Cretaceous - Paleocene collision along the İzmir-Ankara suture zone. The eastern and western parts of the region are presently separated by a northeast-southwest trending transfer zone that was likely originally present as a transform fault in the subducted Tethys oceanic crust, and demonstrates that the regional geodynamic evolution can be strongly influenced by the geographical distribution of geologic features on the subducting plate.

Unraveling the polymetamorphic history of garnet-bearing metabasites: Insights from the North Motagua Mélange (Guatemala Suture Zone)

NASA Astrophysics Data System (ADS)

Bonnet, G.; Flores, K. E.; Martin, C.; Harlow, G. E.

2014-12-01

The Guatemala Suture Zone is the fault-bound region in central Guatemala that contains the present North American-Caribbean plate boundary. This major composite geotectonic unit contains a variety of ophiolites, serpentinite mélanges, and metavolcano-sedimentary sequences along with high-grade schists, gneisses, low-grade metasediments and metagranites thrusted north and south of the active Motagua fault system (MFS). The North Motagua Mélange (NMM) outcrops north of the MFS and testifies the emplacement of exhumed subduction assemblages along a collisional tectonic setting. The NMM is composed of a serpentinite-matrix mélange that contains blocks of metabasites (subgreenschist facies metabasalt, grt-blueschist, eclogite, grt-amphibolite), vein-related rocks (jadeitite, omphacitite, albitite, mica-rock), and metatrondhjemites. Our new detailed petrographic and thermobarometric study on the garnet-bearing metabasites reveals a complex polymetamorphic history with multiple tectonic events. Eclogites show a classical clockwise PT path composed of (a) prograde blueschist/eclogite facies within garnet cores, (b) eclogite facies metamorphic peak at ~1.7 GPa and 620°C, (c) post-peak blueschist facies, (d) amphibolite facies overprint, and (e) late stage greenschist facies. Two types of garnet amphibolite blocks can be found, the first consist of (a) a relict eclogite facies peak at ~1.3 GPa and 550°C only preserved within anhedral garnet cores, and (b) surrounded by a post-peak amphibolite facies. In contrast, the second type displays a prograde amphibolite facies at 0.6-1.1 GPa and 400-650°C. The eclogites metamorphic peak suggests formation in a normal subduction zone at ~60 km depth, a subsequent exhumation to the middle section of the subduction channel (~35 km), and a later metamorphic reworking at lower P and higher T before its final exhumation. The first type of garnet amphibolite shows a similar trajectory as the eclogites but at warmer conditions. In contrast, the second type of garnet amphibolite recorded a single prograde evolution along a hotter thermal gradient. These different PT paths suggest multiple metamorphic events that may be related to subduction initiation, partial exhumation and storage of HP-LT rocks, subduction of buoyant crust, final exhumation and obduction.

The New Britain trench and 149° embayment, Western Solomon Sea

NASA Astrophysics Data System (ADS)

Tiffin, D. L.; Davies, H. L.; Honza, E.; Lock, J.; Okuda, Y.

1987-09-01

The western New Britain Trench contains relatively thin sediment fill in the east, compared to the west where a sequence of thick turbidites is ponded behind a basement high in the trench axis, The trench trends toward Huon Gulf, but intersects the Trobriand Trench at an acute angle at the 149° Embayment, where both trenches end. Seismic structure west of the trench is incoherent, related to incipient collision of the Indian-Australia Plate and the South Bismarck Plate. The collision suture is marked by the Markham Canyon, continuous in its upper reaches with the Ramu-Markham Fault Zone on shore.

Combined open proximal and stent-graft distal repair for distal arch aneurysms: an alternative to total debranching.

PubMed

Zierer, Andreas; Sanchez, Luis A; Moon, Marc R

2009-07-01

We present herein a novel, combined, simultaneous open proximal and stent-graft distal repair for complex distal aortic arch aneurysms involving the descending aorta. In the first surgical step, the transverse arch is opened during selective antegrade cerebral perfusion, and a Dacron graft (DuPont, Wilmington, DE) is positioned down the descending aorta in an elephant trunk-like fashion with its proximal free margin sutured circumferentially to the aorta just distal to the left subclavian or left common carotid artery. With the graft serving as the new proximal landing zone, subsequent endovascular repair is performed antegrade during rewarming through the ascending aorta.

Cystoscopic suture removal by Holmium-YAG laser after Burch procedure

PubMed Central

Karaşahin, Emre Kazım; Esin, Sertaç; Alanbay, İbrahim; Ercan, Mutlu Cihangir; Mutlu, Erol; Başer, İskender; Basal, Şeref

2011-01-01

Burch colposuspension remains one of the successful operations performed for stress incontinence. Accidental suturing of the bladder wall during the procedure or subsequent erosion may lead to lower urinary tract symptoms. Diagnosis and management of these sutures indicate precise evaluation for which a 70 degree cystoscope is used. In selected cases, Holmium-YAG laser may enable us to manage long-standing, encrustated neglected sutures. Here we would like to report successful removal of intravesical sutures using the Holmium-YAG laser. PMID:24591960

Ripcord adjustable suture technique for use in strabismus surgery.

PubMed

Coats, D K

2001-09-01

Adjustable sutures in strabismus surgery may be difficult or impossible in poorly cooperative patients. An adjunct suture technique that allows a 1-step, all-or-nothing, preprogrammed adjustment in patients not considered good candidates for standard postoperative adjustable sutures is described. Twelve patients underwent adjustable strabismus surgery using the ripcord technique. Six patients had unacceptable alignment after surgery. In 5 of these, alignment was successfully adjusted. The ripcord adjustable suture technique is effective and is well tolerated by patients.

Geochemical evidence for cryptic sulfur cycling in salt marsh sediments

NASA Astrophysics Data System (ADS)

Mills, Jennifer V.; Antler, Gilad; Turchyn, Alexandra V.

2016-11-01

Cryptic sulfur cycling is an enigmatic process in which sulfate is reduced to some lower-valence state sulfur species and subsequently quantitatively reoxidized; the rate and microbial energetics of this process and how prevalent it may be in the environment remain controversial. Here we investigate sulfur cycling in salt marsh sediments from Norfolk, England where we observe high ferrous iron concentrations with no depletion of sulfate or change in the sulfur isotope ratio of that sulfate, but a 5‰ increase in the oxygen isotope ratio in sulfate, indicating that sulfate has been through a reductive cycle replacing its oxygen atoms. This cryptic sulfur cycle was replicated in laboratory incubations using 18O-enriched water, demonstrating that the field results do not solely result from mixing processes in the natural environment. Numerical modeling of the laboratory incubations scaled to represent the salt marsh sediments suggests that the uptake rate of sulfate during this cryptic sulfur cycling is similar to the uptake rate of sulfate during the fastest microbial sulfate reduction that has been measured in the natural environment. The difference is that during cryptic sulfur cycling, all of the sulfur is subsequently reoxidized to sulfate. We discuss mechanisms for this pathway of sulfur cycling including the possible link to the subsurface iron cycle.

DNA barcode reference library for Iberian butterflies enables a continental-scale preview of potential cryptic diversity

PubMed Central

Dincă, Vlad; Montagud, Sergio; Talavera, Gerard; Hernández-Roldán, Juan; Munguira, Miguel L.; García-Barros, Enrique; Hebert, Paul D. N.; Vila, Roger

2015-01-01

How common are cryptic species - those overlooked because of their morphological similarity? Despite its wide-ranging implications for biology and conservation, the answer remains open to debate. Butterflies constitute the best-studied invertebrates, playing a similar role as birds do in providing models for vertebrate biology. An accurate assessment of cryptic diversity in this emblematic group requires meticulous case-by-case assessments, but a preview to highlight cases of particular interest will help to direct future studies. We present a survey of mitochondrial genetic diversity for the butterfly fauna of the Iberian Peninsula with unprecedented resolution (3502 DNA barcodes for all 228 species), creating a reliable system for DNA-based identification and for the detection of overlooked diversity. After compiling available data for European butterflies (5782 sequences, 299 species), we applied the Generalized Mixed Yule-Coalescent model to explore potential cryptic diversity at a continental scale. The results indicate that 27.7% of these species include from two to four evolutionary significant units (ESUs), suggesting that cryptic biodiversity may be higher than expected for one of the best-studied invertebrate groups and regions. The ESUs represent important units for conservation, models for studies of evolutionary and speciation processes, and sentinels for future research to unveil hidden diversity. PMID:26205828

Clinical and genetic features of dyskeratosis congenita, cryptic dyskeratosis congenita, and Hoyeraal-Hreidarsson syndrome in Japan.

PubMed

Yamaguchi, Hiroki; Sakaguchi, Hirotoshi; Yoshida, Kenichi; Yabe, Miharu; Yabe, Hiromasa; Okuno, Yusuke; Muramatsu, Hideki; Takahashi, Yoshiyuki; Yui, Shunsuke; Shiraishi, Yuichi; Chiba, Kenichi; Tanaka, Hiroko; Miyano, Satoru; Inokuchi, Koiti; Ito, Etsuro; Ogawa, Seishi; Kojima, Seiji

2015-11-01

Dyskeratosis congenita (DKC) is an inherited bone marrow failure (BMF) syndrome typified by reticulated skin pigmentation, nail dystrophy, and mucosal leukoplakia. Hoyeraal-Hreidarsson syndrome (HHS) is considered to be a severe form of DKC. Unconventional forms of DKC, which develop slowly in adulthood but without the physical anomalies characteristic of DKC (cryptic DKC), have been reported. Clinical and genetic features of DKC have been investigated in Caucasian, Black, and Hispanic populations, but not in Asian populations. The present study aimed to determine the clinical and genetic features of DKC, HHS, and cryptic DKC among Japanese patients. We analyzed 16 patients diagnosed with DKC, three patients with HHS, and 15 patients with cryptic DKC. We found that platelet count was significantly more depressed than neutrophil count or hemoglobin value in DKC patients, and identified DKC patients with large deletions in the telomerase reverse transcriptase and cryptic DKC patients with RTEL1 mutations on both alleles. This led to some patients previously considered to have unclassifiable BMF being diagnosed with cDKC through identification of new gene mutations. It thus seems important from a clinical viewpoint to re-examine the clinical characteristics, frequency of genetic mutations, and treatment efficacy in DKC, HHS, and cDKC.

A Microphysically-based Approach to Inferring Porosity, Grain Size, and Dust Abundance in the Seasonal Caps from Atmospherically-corrected TES Spectra

NASA Technical Reports Server (NTRS)

Eluszkiewicz, J.; Titus, T. N.

2003-01-01

One of the highlights of the TES observations in the polar regions has been the identification of a "cryptic" region in the south where CO2 appears to be in the form of a solid slab rather than a fluffy frost. While the exact mechanism(s) by which the cryptic region is formed are still subject of some debate, it appears certain that a type of rapid metamorphism related to the high volatility of CO2 ice is involved. The high volatility of CO2 ice under martian conditions has several Solar System analogs (N2 on Triton and Pluto, SO2 on Io), thus making the martian cryptic region somewhat less cryptic and certainly non-unique among planetary objects. In an endmember scenario, both the formation and the spectral properties of the cryptic region (and of other areas in the seasonal caps) can be quantitatively modeled by considering sintering of an ensemble of quasi-spherical CO2 grains. This model includes the special case of instanteneous slab formation, which occurs when the grains are sufficiently small (in the submicron range) so that their sintering timescale is short relative to the deposition timescale (a situation analogous to the "sintering" of water droplets falling into a pond).

The suspension (Frost) suture: experience and applications.

PubMed

Connolly, Karen L; Albertini, John G; Miller, Christopher J; Ozog, David M

2015-03-01

The Frost suture is a well-known surgical technique for providing upward tension on the lower lid to prevent or correct ectropion after surgical interventions in the periorbital area. Despite its relatively common use, comprehensive information on executing this technique is not readily available. To review eyelid anatomy, indications, and proper technique for performing the Frost suture, as well as potential complications. A review of the literature on Frost sutures was performed. Cadaveric dissection was performed to demonstrate placement of the Frost suture. The Frost suture is a useful method to reduce the risk of ectropion after surgery near the lower eyelid. Downward pull on the lid can occur with normal wound contracture even if ectropion is not present with the initial repair, reinforcing the need for preventive measures. Potential complications of this technique include superficial skin erosion of the upper lid, corneal abrasion, and blockage of the field of vision while the suture is in place.

Effect of human pancreatic juice and bile on the tensile strength of suture materials.

PubMed

Muftuoglu, M A Tolga; Ozkan, Erkan; Saglam, Abdullah

2004-08-01

Several suture materials are used for pancreatojejunal anastomosis. In this study, we tested the durability of these suture materials in human pancreatic juice and bile. Plain and chromic catgut, polyglactin 910, polyglycolic acid, polydioxanone, polypropylene, and silk sutures were incubated in pancreatic juice and bile that was collected from patients. Fifteen samples of each type of suture material were placed in human juices for 1, 3, and 7 days. Tensile strengths were measured with a tensionmeter. Plain and chromic catgut disintegrated in pancreatic juice and pancreatic juice plus bile mixture. Polyglycolic acid and polyglactin 910 suture materials were vulnerable to pancreatic juice within 7 days. Polydioxanone retained most of its initial strength in pancreatic juice and bile. Polypropylene and silk retained 84% and 92% of their initial strength, respectively. We found that polidioxanone was the strongest suture material in pancreatic juice.

Brief communication: Testing the usefulness of the basilar suture as a means to determine age in great ape skeletons.

PubMed

Poe, Demelza J

2011-01-01

A fused/closed basilar suture is usually treated as an indication of old age in great apes. A sample, drawn from a variety of sources, of known-aged captive great ape skeletons was analyzed to test the usefulness of using the basilar suture to categorize adult skeletons as either "adult" or "old adult". The state of closure of the basilar suture was examined in 30 chimpanzees, 19 gorillas, and 15 orangutans, all of known age. The results show that the basilar suture demonstrates a high level of uniformity in rate of closure and is closed at an early age in virtually all known-aged individuals. Thus, an old adult category most likely includes individuals who are, in fact, relatively young. This indicates that using the basilar suture as a means to classify individual skeletons as adult or old adult is very imprecise. The homogenous nature of basilar suture closure appears to prevent meaningful application of suture status for categorizing adult ape skeletons by age groups.

3D Printed Anchoring Sutures for Permanent Shaping of Tissues.

PubMed

Wei, Wei; Li, Yuxiao; Yang, Huazhe; Nassab, Reza; Shahriyari, Fatemeh; Akpek, Ali; Guan, Xiaofei; Liu, Yanhui; Taranejoo, Shahrouz; Tamayol, Ali; Zhang, Yu Shrike; Khademhosseini, Ali; Jang, Hae Lin

2017-12-01

Sutures are one of the most widely used devices for adhering separated tissues after injury or surgery. However, most sutures require knotting, which can create a risk of inflammation, and can act as mechanically weak points that often result in breakage and slipping. Here, an anchoring suture is presented with a design that facilitates its propagation parallel to the suturing direction, while maximizing its resistive force against the opposite direction of external force to lock its position in tissues. Different microstructures of suture anchors are systematically designed using orthogonal arrays, and selected based on shape factors associated with mechanical strength. 3D printing is used to fabricate different types of hollow microstructured suture anchors, and optimize their structure for the effective shaping of tissues. To define the structural design for fixing tissues, the maximum force required to pull 3D printed anchors in different directions is examined with tissues. The tissue reshaping function of suture anchors is further simulated ex vivo by using swine ear, nose, and skin, and bovine muscle tendon. This study provides advantages for building functional sutures that can be used for permanently reshaping tissues with enhanced mechanical strength, eliminating the need for knotting to improve surgical efficiency. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Evaluation of four surgical implantation techniques for age-0 white sturgeon ( Acipenser transmontanus Richardson, 1836) with a new acoustic transmitter

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liss, S. A.; Ashton, N. K.; Brown, R. S.

A new acoustic transmitter (AT; cylindrical, 0.7 g in air, 24.2×5.0 mm, up to 365 d battery life) was developed to monitor age-0 sturgeon; however, an implantation technique is critical to provide guidance for its use in field research. The goal of this study was to evaluate four implantation techniques by assessing transmitter retention, survival, growth, and wound healing variables. White sturgeon (Acipenser transmontanus; n = 150, 35–116 g, 182–289 mm fork length) were separated into five treatments: 1) unmarked, 2) flank incision with one suture, 3) flank incision without a suture, 4) offline incision with one suture, and 5)more » offline incision without a suture. Tagged fish were implanted with a non-functioning AT and all fish were held for 28 days. There was 100% transmitter retention and no difference in survival or growth (by 14 d post-implantation) among treatments. Sutured treatments had greater inflammation and presence of ulceration and water mold than non-sutured. Offline incision fish were more susceptible to red vein aggregation than flank incision fish. Non-sutured treatments had greater openness than sutured, but only during the first 14 d post-implantation. The flank incision without a suture technique is recommended.« less

Genipin crosslinker releasing sutures for improving the mechanical/repair strength of damaged connective tissue.

PubMed

Sundararaj, Sharath; Slusarewicz, Paul; Brown, Matt; Hedman, Thomas

2017-11-01

The most common mode of surgical repair of ruptured tendons and ligaments involves the use of sutures for reattachment. However, there is a high incidence of rerupture and repair failure due to pulling out of the suture material from the damaged connective tissue. The main goal of this research was to achieve a localized delivery of crosslinking agent genipin (GP) from rapid-release biodegradable coatings on sutures, for strengthening the repair of ruptured connective tissue. Our hypothesis is that GP released from the suture coating will lead to exogenous crosslinking of native connective tissue resulting in beneficial effects on clinically relevant mechanical parameters such as tear resistance, tissue strength, and energy required to rupture the tissue (toughness). Sutures were successfully coated with a biodegradable polymer layer loaded with the crosslinking agent genipin, without compromising the mechanical properties of the suture. The rapid-release of genipin was achieved under both in vitro and ex vivo conditions. Exogenous crosslinking using these genipin releasing sutures was demonstrated using equine tendons. The tendons treated with genipin releasing sutures showed significant improvement in failure load, energy required for pull-out failure, and stiffness. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 105B: 2199-2205, 2017. © 2016 Wiley Periodicals, Inc.

Sutural loosening and skeletal flexibility during growth: determination of drop-like shapes in sea urchins.

PubMed

Johnson, Amy S; Ellers, Olaf; Lemire, Jim; Minor, Melissa; Leddy, Holly A

2002-02-07

The shape of sea urchins may be determined mechanically by patterns of force analogous to those that determine the shape of a water droplet. This mechanical analogy implies skeletal flexibility at the time of growth. Although comprised of many rigid calcite plates, sutural collagenous ligaments could confer such flexibility if the sutures between plates loosened and acted as joints at the time of growth. We present experimental evidence of such flexibility associated with weight gain and growth. Over 13-, 4-, and 2-week periods, fed urchins (Strongylocentrotus droebachiensis) gained weight and developed looser sutures than unfed urchins that maintained or lost weight. Further, skeletons of fed urchins force-relaxed more than did those of unfed urchins and urchins with loose sutures force-relaxed more than those with tight sutures. Urchins (Strongylocentrotus franciscanus) fed for two and a half weeks, gained weight, also had looser skeletons and deposited calcite at sutural margins, whereas unfed ones did not. In field populations of S. droebachiensis the percentage having loose sutures varied with urchin diameter and reflected their size-specific growth rate. The association between feeding, weight gain, calcite deposition, force relaxation and sutural looseness supports the hypothesis that urchins deform flexibly while growing, thus determining their drop-like shapes.

Evaluation of tensile strength of surgical synthetic absorbable suture materials: an in vitro study

PubMed Central

Ranganath, V.; Nichani, Ashish Sham

2013-01-01

Purpose The purpose of this study was to evaluate the tensile strength of surgical synthetic absorbable sutures over a period of 14 days under simulated oral conditions. Methods Three suture materials (polyglycolic acid [PGA], polyglactin [PG] 910, and poly (glycolide-co-є-caprolactone) [PGC]) were used in 4-0 and 5-0 gauges. 210 suture samples (35 of each material and gauge) were used. All of the samples were tested preimmersion and 1 hour and 1, 3, 7, 10, and 14 days postimmersion. The tensile strength of each suture material and gauge was assessed. The point of breakage and the resorption pattern of the sutures were also assessed. Results During the first 24 hours of immersion, all 4-0 and 5-0 samples of PGA, PG 910, and PGC maintained their initial tensile strength. At baseline (preimmersion), there was a statistically significant (P<0.001) difference in the tensile strengths between the 4-0 and 5-0 gauge of PGA, PG 910, and PGC. PGA 4-0 showed the highest tensile strength until day 10. At 7 days, all the 4-0 sutures of the three materials had maintained their tensile strength with PGA 4-0 having significantly greater (P=0.003) tensile strength compared to PG. Conclusions 4-0 sutures are stronger and have greater tensile strength than 5-0 sutures. The PGA 4-0 suture showed the highest tensile strength at the end of day 10. PMID:23837127

Heterochrony and patterns of cranial suture closure in hystricognath rodents

PubMed Central

Wilson, Laura A B; Sánchez-Villagra, Marcelo R

2009-01-01

Sutures, joints that allow one bone to articulate with another through intervening fibrous connective tissue, serve as major sites of bone expansion during postnatal craniofacial growth in the vertebrate skull and represent an aspect of cranial ontogeny which may exhibit functional and phylogenetic correlates. Suture evolution among hystricognath rodents, an ecologically diverse group represented here by 26 species, is examined using sequence heterochrony methods, i.e. event pairing and parsimov. Although minor nuances in suture closure sequence exist between species, the overall sequence was found to be conserved both across the hystricognath group and, to an increasing degree, within selected clades. At species level, suture closure pattern exhibited a significant positive correlation with patterns previously reported for hominoids. Patterns for most clades revealed the first sutures to close are those contacting the exoccipital, interparietal, and palatine bones. Heterochronic shifts were found along 19 of 35 branches within the hystricognath phylogeny. The number of shifts per node ranged from one to seven events and, overall, involved 21 of 34 suture sites. The topology generated by parsimony analyses of the event pair matrix yielded only one grouping that was congruent with the evolutionary relationships, compiled from morphological and molecular studies, taken as framework. Sutures contacting the exoccipital displayed the highest levels of most complete closure across all species. Level of suture closure is negatively correlated with cranial length (P < 0.05). Differing life history and locomotory strategies are coupled in part with differing suture closure patterns among several species. PMID:19245501

Elasticity and breaking strength of synthetic suture materials incubated in various equine physiological and pathological solutions.

PubMed

Kearney, C M; Buckley, C T; Jenner, F; Moissonnier, P; Brama, P A J

2014-07-01

Selection of suture material in equine surgery is often based on costs or subjective factors, such as the surgeon's personal experience, rather than objective facts. The amount of objective data available on durability of suture materials with regard to specific equine physiological conditions is limited. To evaluate the effect of various equine physiological and pathological fluids on the rate of degradation of a number of commonly used suture materials. In vitro material testing. Suture materials were exposed in vitro to physiological fluid, followed by biomechanical analysis. Three absorbable suture materials, glycolide/lactide copolymer, polyglactin 910 and polydioxanone were incubated at 37°C for 7, 14 or 28 days in phosphate-buffered saline, equine serum, equine urine and equine peritoneal fluid from an animal with peritonitis. Five strands of each suture material type were tested to failure in a materials testing machine for each time point and each incubation medium. Yield strength, strain and Young's modulus were calculated, analysed and reported. For all suture types, the incubation time had a significant effect on yield strength, percentage elongation and Young's modulus in all culture media (P<0.0001). Suture type was also shown significantly to influence changes in each of yield strength, percentage elongation and Young's modulus in all culture media (P<0.0001). While the glycolide/lactide copolymer demonstrated the highest Day 0 yield strength, it showed the most rapid degradation in all culture media. For each of the 3 material characteristics tested, polydioxanone showed the least variation across the incubation period in each culture medium. The duration of incubation and the type of fluid have significant effects on the biomechanical properties of various suture materials. These findings are important for evidence-based selection of suture material in clinical cases. © 2013 EVJ Ltd.

Microbiology of Explanted Suture Segments from Infected and Noninfected Surgical Patients

PubMed Central

Krepel, Candace J.; Marks, Richard M.; Rossi, Peter J.; Sanger, James; Goldblatt, Matthew; Graham, Mary Beth; Rothenburger, Stephen; Collier, John; Seabrook, Gary R.

2013-01-01

Sutures under selective host/environmental factors can potentiate postoperative surgical site infection (SSI). The present investigation characterized microbial recovery and biofilm formation from explanted absorbable (AB) and nonabsorbable (NAB) sutures from infected and noninfected sites. AB and NAB sutures were harvested from noninfected (70.9%) and infected (29.1%) sites in 158 patients. At explantation, devices were sonicated and processed for qualitative/quantitative bacteriology; selective sutures were processed for scanning electron microscopy (SEM). Bacteria were recovered from 85 (53.8%) explanted sites; 39 sites were noninfected, and 46 were infected. Suture recovery ranged from 11.1 to 574.6 days postinsertion. A significant difference in mean microbial recovery between noninfected (1.2 isolates) and infected (2.7 isolates) devices (P < 0.05) was noted. Staphylococcus epidermidis, Staphylococcus aureus, coagulase-negative staphylococci (CNS), Peptostreptococcus spp., Bacteroides fragilis, Escherichia coli, Enterococcus spp., Pseudomonas aeruginosa, and Serratia spp. were recovered from infected devices, while commensal skin flora was recovered from noninfected devices. No significant difference in quantitative microbial recovery between infected monofilament and multifilament sutures was noted. Biofilm was present in 100% and 66.6% of infected and noninfected devices, respectively (P < 0.042). We conclude that both monofilament and braided sutures provide a hospitable surface for microbial adherence: (i) a significant difference in microbial recovery from infected and noninfected sutures was noted, (ii) infected sutures harbored a mixed flora, including multidrug-resistant health care-associated pathogens, and (iii) a significant difference in the presence or absence of a biofilm in infected versus noninfected explanted devices was noted. Further studies to document the benefit of focused risk reduction strategies to minimize suture contamination and biofilm formation postimplantation are warranted. PMID:23175247

Efficacy of triclosan-coated sutures for reducing risk of surgical site infection in adults: a meta-analysis of randomized clinical trials.

PubMed

Guo, Jiao; Pan, Ling-Hui; Li, Yun-Xi; Yang, Xiang-Di; Li, Le-Qun; Zhang, Chun-Yan; Zhong, Jian-Hong

2016-03-01

Surgical site infection (SSI) is the third most frequent type of nosocomial infections. Triclosan-coated sutures are often used to reduce the risk of SSI, but studies examining this have given conflicting results. Therefore, this meta-analysis was performed to assess the efficacy of triclosan-coated sutures for reducing risk of SSI in adults. PubMed, EMBASE, Google Scholar, and ClinicalTrials.gov were searched to identify randomized clinical trials evaluating triclosan-coated sutures for preventing SSI on patients 18 y or older. Thirteen randomized clinical trials involving 5256 participants were included. Triclosan-coated sutures were associated with lower risk of SSI than uncoated sutures across all surgeries (risk ratio [RR] 0.76, 95% confidence interval [CI] 0.65-0.88, P < 0.001). Similar proportions of patients experienced wound dehiscence with either type of suture (RR 0.97, 95% CI 0.49-1.89, P = 0.92). Subgroup analysis showed lower risk of SSI with triclosan-coated sutures in abdominal surgeries (RR 0.70, 95% CI 0.50-0.99, P = 0.04) and group with prophylactic antibiotic (RR 0.79, 95% CI 0.63-0.99, P = 0.04). However, such risk reduction was not observed in cardiac surgeries, breast surgeries, or group without prophylactic antibiotic. Triclosan-coated sutures can decrease the incidence of SSI in abdominal surgeries and might not interfere with wound healing process. Nevertheless, further studies are needed to examine whether triclosan-coated sutures are effective at preventing SSI in non-abdominal surgeries and to further study the interaction of antibiotic prophylaxis with triclosan-coated sutures. Copyright © 2016 Elsevier Inc. All rights reserved.

Laser tissue welding in genitourinary reconstructive surgery: assessment of optimal suture materials.

PubMed

Poppas, D P; Klioze, S D; Uzzo, R G; Schlossberg, S M

1995-02-01

Laser tissue welding in genitourinary reconstructive surgery has been shown in animal models to decrease operative time, improve healing, and decrease postoperative fistula formation when compared with conventional suture controls. Although the absence of suture material is the ultimate goal, this has not been shown to be practical with current technology for larger repairs. Therefore, suture-assisted laser tissue welding will likely be performed. This study sought to determine the optimal suture to be used during laser welding. The integrity of various organic and synthetic sutures exposed to laser irradiation were analyzed. Sutures studied included gut, clear Vicryl, clear polydioxanone suture (PDS), and violet PDS. Sutures were irradiated with a potassium titanyl phosphate (KTP)-532 laser or an 808-nm diode laser with and without the addition of a light-absorbing chromophore (fluorescein or indocyanine green, respectively). A remote temperature-sensing device obtained real-time surface temperatures during lasing. The average temperature, time, and total energy at break point were recorded. Overall, gut suture achieved significantly higher temperatures and withstood higher average energy delivery at break point with both the KTP-532 and the 808-nm diode lasers compared with all other groups (P < 0.05). Both chromophore-treated groups had higher average temperatures at break point combined with lower average energy. The break-point temperature for all groups other than gut occurred at 91 degrees C or less. The optimal temperature range for tissue welding appears to be between 60 degrees and 80 degrees C. Gut suture offers the greatest margin of error for KTP and 808-nm diode laser welding with or without the use of a chromophore.

Contribution of computational model for assessment of heart tissue local stress caused by suture in LVAD implantation.

PubMed

Chalon, A; Favre, J; Piotrowski, B; Landmann, V; Grandmougin, D; Maureira, J-P; Laheurte, P; Tran, N

2018-06-01

Implantation of a Left Ventricular Assist Device (LVAD) may produce both excessive local tissue stress and resulting strain-induced tissue rupture that are potential iatrogenic factors influencing the success of the surgical attachment of the LVAD into the myocardium. By using a computational simulation compared to mechanical tests, we sought to investigate the characteristics of stress-induced suture material on porcine myocardium. Tensile strength experiments (n = 8) were performed on bulk left myocardium to establish a hyperelastic reduced polynomial constitutive law. Simultaneously, suture strength tests on left myocardium (n = 6) were performed with a standard tensile test setup. Experiments were made on bulk ventricular wall with a single U-suture (polypropylene 3-0) and a PTFE pledget. Then, a Finite Element simulation of a LVAD suture case was performed. Strength versus displacement behavior was compared between mechanical and numerical experiments. Local stress fields in the model were thus analyzed. A strong correlation between the experimental and the numerical responses was observed, validating the relevance of the numerical model. A secure damage limit of 100 kPa on heart tissue was defined from mechanical suture testing and used to describe numerical results. The impact of suture on heart tissue could be accurately determined through new parameters of numerical data (stress diffusion, triaxiality stress). Finally, an ideal spacing between sutures of 2 mm was proposed. Our computational model showed a reliable ability to provide and predict various local tissue stresses created by suture penetration into the myocardium. In addition, this model contributed to providing valuable information useful to design less traumatic sutures for LVAD implantation. Therefore, our computational model is a promising tool to predict and optimize LVAD myocardial suture. Copyright © 2018 Elsevier Ltd. All rights reserved.

Load response and gap formation in a single-row cruciate suture rotator cuff repair.

PubMed

Huntington, Lachlan; Richardson, Martin; Sobol, Tony; Caldow, Jonathon; Ackland, David C

2017-06-01

Double-row rotator cuff tendon repair techniques may provide superior contact area and strength compared with single-row repairs, but are associated with higher material expenses and prolonged operating time. The purpose of this study was to evaluate gap formation, ultimate tensile strength and stiffness of a single-row cruciate suture rotator cuff repair construct, and to compare these results with those of the Mason-Allen and SutureBridge repair constructs. Infraspinatus tendons from 24 spring lamb shoulders were harvested and allocated to cruciate suture, Mason-Allen and SutureBridge repair groups. Specimens were loaded cyclically between 10 and 62 N for 200 cycles, and gap formation simultaneously measured using a high-speed digital camera. Specimens were then loaded in uniaxial tension to failure, and construct stiffness and repair strength were evaluated. Gap formation in the cruciate suture repair was significantly lower than that of the Mason-Allen repair (mean difference = 0.6 mm, P = 0.009) and no different from that of the SutureBridge repair (P > 0.05). Both the cruciate suture repair (mean difference = 15.7 N/mm, P = 0.002) and SutureBridge repair (mean difference = 15.8 N/mm, P = 0.034) were significantly stiffer than that of the Mason-Allen repair; however, no significant differences in ultimate tensile strength between repair groups were discerned (P > 0.05). The cruciate suture repair construct, which may represent a simple and cost-effective alternative to double-row and double-row equivalent rotator cuff repairs, has comparable biomechanical strength and integrity with that of the SutureBridge repair, and may result in improved construct longevity and tendon healing compared with the Mason-Allen repair. © 2017 Royal Australasian College of Surgeons.

Triclosan-containing sutures versus ordinary sutures for reducing surgical site infections in children: a double-blind, randomised controlled trial.

PubMed

Renko, Marjo; Paalanne, Niko; Tapiainen, Terhi; Hinkkainen, Matti; Pokka, Tytti; Kinnula, Sohvi; Sinikumpu, Juha-Jaakko; Uhari, Matti; Serlo, Willy

2017-01-01

Surgical site infections (SSIs) are a pervasive problem in surgery. Sutures coated or impregnated with triclosan might reduce the occurrence of SSIs, but evidence of their efficacy is limited, especially in children. We designed a randomised, double-blind, controlled trial in patients who underwent elective or daytime emergency surgery at Oulu University Hospital (Oulu, Finland). We included children younger than 18 years staying in the paediatric surgery and orthopaedics ward for any elective or emergency surgery during the daytime and with anticipated use of absorbing sutures. Children were randomly allocated (1:1) to receive either triclosan-containing sutures or ordinary absorbing sutures. The primary outcome was the occurrence of superficial or deep surgical site infections according to the Centers for Disease Control and Prevention criteria within 30 days after surgery. The primary analysis was with modified intention to treat. This trial is registered at ClinicalTrials.gov, number NCT01220700. Between September, 2010, and December, 2014, 1633 children were recruited. In the modified intention-to-treat group, SSIs occurred in 20 (3%) of 778 patients allocated to receive triclosan-containing sutures and in 42 (5%) of 779 patients allocated to receive control sutures (risk ratio 0·48, 95% CI 0·28-0·80). To prevent one SSI, triclosan-containing sutures had to be used in 36 children (95% CI 21-111). One patient died from suspected mitochondrial disease; no other expected or unexpected adverse events were reported in either of the groups. Use of triclosan-containing sutures effectively reduced the occurrence of all SSIs compared with normal sutures. The results accord with the results of meta-analyses of previous studies in adults. Use of triclosan-containing sutures is a simple way to reduce SSIs in children. The Alma and K A Snellman Foundation. Copyright © 2017 Elsevier Ltd. All rights reserved.

Anatomic suture anchor versus the Broström technique for anterior talofibular ligament repair: a biomechanical comparison.

PubMed

Waldrop, Norman E; Wijdicks, Coen A; Jansson, Kyle S; LaPrade, Robert F; Clanton, Thomas O

2012-11-01

Despite the popularity of the Broström procedure for secondary repair of chronic lateral ankle instability, there have been no biomechanical studies reporting on the strength of this secondary repair method, whether using suture fixation or suture anchors. The purpose of our study was to perform a biomechanical comparison of the ultimate load to failure and stiffness of the traditional Broström technique using only a suture repair compared with a suture anchor repair of the anterior talofibular ligament (ATFL) at time zero. We believed that fixation strength of the suture anchor repair would be closer to the strength of the native ligament and allow more aggressive rehabilitation. Controlled laboratory study. Twenty-four fresh-frozen cadaveric ankles were randomly divided into 4 groups of 6 specimens. One group was an intact control group, and the other groups consisted of the traditional Broström and 2 suture anchor modifications (suture anchors in talus or fibula) of the Broström procedure. The specimens were loaded to failure to determine the strength and stiffness of each construct. In load-to-failure testing, ultimate failure loads of the Broström (68.2 ± 27.8 N; P = .013), suture anchor fibula (79.2 ± 34.3 N; P = .037), and suture anchor talus (75.3 ± 45.6 N; P = .027) repairs were significantly lower than that of the intact (160.9 ± 72.2 N) ATFL group. Stiffness of the Broström (6.0 ± 2.5 N/mm; P = .02), suture anchor fibula (6.8 N/mm ± 2.7; P = .05), and suture anchor talus (6.6 N/mm ± 4.0; P = .04) repairs were significantly lower than that of the intact (12.4 N/mm ± 4.1 N/mm) ATFL group. The 3 repair groups were not significantly different from each other, but all 3 were substantially lower in strength and stiffness when compared to the intact ATFL. The use of suture anchors to repair the ATFL produces a repair that can withstand loads to failure similar to the suture-only Broström repair. However, all 3 repair groups were much weaker than the intact, uninjured ATFL. Biomechanically, the results show that both suture anchor and direct suture repair of the ATFL provide similar strength and stiffness. Unfortunately, these methods provide less than half the strength and stiffness of the native ATFL at time zero. As a result, regardless of the repair method, it is necessary to sufficiently protect the repair to avoid premature failure.

In-vivo assessment of barbed suturing thread with regard to tissue reaction and material absorption in a rat model.

PubMed

Petrut, Bogdan; Hogea, Maximiliam; Fetica, Bogdan; Kozan, Andrei; Feflea, Dragos; Sererman, Gabriel; Goezen, Ali Serdar; Rassweiler, Jens

2013-01-01

The laparoscopic approach in urological surgery demands a high degree of skill in intracorporeal suturing and knot tying. In an effort to reduce the amount of time required to perform a suture, new materials have been developed that through selfanchorage distribute tension more evenly across the suture and also eliminate the need of knot tying. The goal of this study was to assess the in vivo tissue response to a novel material (V-Loc tm; Covidien) in comparison to established materials (Vicryl, PDS II), in the case of bladder suturing, in a rat model. The study included 48 male Wistar rats. All underwent a median abdominal incision, with a 1cm cystotomy, followed by a running suture. The suture material used was either V-Loc absorbable self anchoring thread, Vicryl threaded absorbable suture or monofilament absorbable suture. The abdominal cavity and the bladder suture were macroscopically evaluated at the rats' scheduled death at 3 and 6 weeks. The bladder wall was microscopically assessed by a pathologist, with regard to tissue reaction and suture material degradation. All rats survived the procedure, with the abdominal scar fully healed at week 2. There were no signs of infection or lithiasis during the observation. Macroscopically, at 3 weeks, the suture material was recognizable and visible in all cases, with special mention that the V-Loc thread was considerably more rigid, retaining its shape almost entirely, and provoked more adhesion of the surrounding tissue. At 6 weeks, the suture was indistinguishable in the bladder wall in the case of monofilament absorbable material, barely visible in the case of Vicryl, while the aspect of the V-Loc suture resembled the one at 3 weeks, with the material still clearly visible in the bladder wall, shape almost entirely maintained, and surrounding tissue adherence. Microscopically, at 3 weeks and 6 weeks, all bladder walls examined had regained their structure. At 3 weeks, the monofilament absorbable suture showed intense tissue reaction, with the material already in phagocytosis; at 6 weeks, no clear evidence of leftover material was observed. At 3 weeks, the Vicryl material showed moderate tissue reaction, with phagocytosis initiated between the strands of the material; at 6 weeks, the material was almost entirely absorbed, but with a clear leftover tissue reaction. In the case of the V-Loc suture, due to the hardness of the thread, the material itself could not be cut for analysis with the bladder wall, and the examination could only involve the bladder wall and marks of the thread. Thus, the tissue reaction was minimal, as was the presence of phagocytes at the suture site. The material showed little, if any, signs of absorption after 6 weeks. The materials tested all proved equally effective in suturing the bladder wall in a rat model. However, the novel barbed thread proved a consistently low in-vivo absorption rate, while maintaining its rigidity over time. More research is needed to assess the possible clinical implications of these findings.

In-vivo assessment of barbed suturing thread with regard to tissue reaction and material absorption in a rat model

PubMed Central

PETRUT, BOGDAN; HOGEA, MAXIMILIAM; FETICA, BOGDAN; KOZAN, ANDREI; FEFLEA, DRAGOS; SERERMAN, GABRIEL; GOEZEN, ALI SERDAR; RASSWEILER, JENS

2013-01-01

Aim The laparoscopic approach in urological surgery demands a high degree of skill in intracorporeal suturing and knot tying. In an effort to reduce the amount of time required to perform a suture, new materials have been developed that through selfanchorage distribute tension more evenly across the suture and also eliminate the need of knot tying. The goal of this study was to assess the in vivo tissue response to a novel material (V-Loc tm; Covidien) in comparison to established materials (Vicryl, PDS II), in the case of bladder suturing, in a rat model. Methods The study included 48 male Wistar rats. All underwent a median abdominal incision, with a 1cm cystotomy, followed by a running suture. The suture material used was either V-Loc absorbable self anchoring thread, Vicryl threaded absorbable suture or monofilament absorbable suture. The abdominal cavity and the bladder suture were macroscopically evaluated at the rats’ scheduled death at 3 and 6 weeks. The bladder wall was microscopically assessed by a pathologist, with regard to tissue reaction and suture material degradation. Results All rats survived the procedure, with the abdominal scar fully healed at week 2. There were no signs of infection or lithiasis during the observation. Macroscopically, at 3 weeks, the suture material was recognizable and visible in all cases, with special mention that the V-Loc thread was considerably more rigid, retaining its shape almost entirely, and provoked more adhesion of the surrounding tissue. At 6 weeks, the suture was indistinguishable in the bladder wall in the case of monofilament absorbable material, barely visible in the case of Vicryl, while the aspect of the V-Loc suture resembled the one at 3 weeks, with the material still clearly visible in the bladder wall, shape almost entirely maintained, and surrounding tissue adherence. Microscopically, at 3 weeks and 6 weeks, all bladder walls examined had regained their structure. At 3 weeks, the monofilament absorbable suture showed intense tissue reaction, with the material already in phagocytosis; at 6 weeks, no clear evidence of leftover material was observed. At 3 weeks, the Vicryl material showed moderate tissue reaction, with phagocytosis initiated between the strands of the material; at 6 weeks, the material was almost entirely absorbed, but with a clear leftover tissue reaction. In the case of the V-Loc suture, due to the hardness of the thread, the material itself could not be cut for analysis with the bladder wall, and the examination could only involve the bladder wall and marks of the thread. Thus, the tissue reaction was minimal, as was the presence of phagocytes at the suture site. The material showed little, if any, signs of absorption after 6 weeks. Conclusion The materials tested all proved equally effective in suturing the bladder wall in a rat model. However, the novel barbed thread proved a consistently low in-vivo absorption rate, while maintaining its rigidity over time. More research is needed to assess the possible clinical implications of these findings. PMID:26527981

[Effect of epidural drainage and dural tenting suture on epidural hematoma in 145 cases of craniotomy].

PubMed

Zhao, Jie; Liu, Zhixiong; Liu, Yunsheng; Liu, Jinfang; Fang, Wenhua; Rao, Yihua; Yang, Liang; Yuan, Xianrui

2010-03-01

To evaluate the efficacy of dural tenting suture and epidural drainage in craniotomy. In 145 cases of intracranial lesions, dural tenting suture and epidural drainage were performed to prevent epidural hematoma. Postoperative computed tomography (CT) showed no epidural hematoma required surgery in both groups. Both dural tenting suture and epidural drainage are effective in preventing epidural hematoma. Hemostasis is the key step. Dural tenting suture without epidural drainage relieves psychological stress. It decreases the risk of intracranial infection and avoids some unusual complications.

Use of Frost sutures in an orbital trauma patient with extensive conjunctival oedema and pseudoproptosis.

PubMed

Krishnan, R; Izadi, S; Morton, C E; Marsh, I B

2007-07-01

Frost sutures are temporary suspension sutures conventionally used in oculoplastics. The case is presented here of a patient with multiple orbital fractures who developed worsening conjunctival chemosis and pseudoproptosis. This patient was managed successfully with Frost sutures. To the best of the authors' knowledge, there is no documented use of Frost sutures in this type of case. It is emphasized that this technique should only be considered following rigorous exclusion of retrobulbar pathology and careful attention towards early detection of raised intraocular pressure.

A novel suture technique using the FasT-Fix combined with Ultrabraid for pullout repair of the medial meniscus posterior root tear.

PubMed

Fujii, Masataka; Furumatsu, Takayuki; Kodama, Yuya; Miyazawa, Shinichi; Hino, Tomohito; Kamatsuki, Yusuke; Yamada, Kazuki; Ozaki, Toshifumi

2017-05-01

Medial meniscus posterior root has an important role in the maintenance of knee articular cartilage. Although pullout repair of the medial meniscus posterior root tear has become a gold standard, it has several difficulties for suturing. We have developed a modified Mason-Allen suture technique using the FasT-Fix all-inside suture device combined with Ultrabraid. The present suture technique allows a strong grasping of the medial meniscus posterior horn for arthroscopic pullout repair.

Surgical wound healing in radio-tagged adult Pacific lamprey Entosphenus tridentatus held on different substrata

USGS Publications Warehouse

Mesa, M.G.; Magie, R.J.; Copeland, E.S.; Christiansen, H.E.

2011-01-01

Radio-tagged adult Pacific lamprey Entosphenus tridentatus held in a raceway with Plexiglas-lined walls and bottom healed more slowly and retained sutures longer than fish held in an all-concrete raceway or one with Plexiglas walls and a cobble-lined bottom. On all substrata, healing depended on when sutures were lost, and fish that lost their sutures in <14 days post-surgery healed faster than those that kept sutures longer. Long-term suture retention led to tissue trauma, infection and poor survival.

Post thyroidectomy suture granuloma: a cytological diagnosis.

PubMed

Javalgi, Anita P; Arakeri, Surekha U

2013-04-01

There are known post thyroidectomized complications, a suture granuloma being less frequent, with its late complication mimicking recurrent thyroid cancer. A suture granuloma is a benign, granulomatous inflammatory reaction that occurs due to the use of non absorbable suture. It constitutes one of the late complications which altogether make up less than 2% of its incidence. A suture granuloma is similar to a foreign body reaction and it usually develops slowly as a painless, palpable asymptomatic mass over the years. It mimics a cancer recurrence or a lymph node metastasis. Here, we are reporting a case of a post thyroidectomy suture granuloma in a 46 years old lady who presented with a painless swelling in the lateral neck, with a past history of thyroidectomy 5 years back.

The Eastern Tennessee Seismic Zone: Reactivation of an Ancient Continent-Continent Suture Zone

NASA Astrophysics Data System (ADS)

Powell, C. A.

2014-12-01

The eastern Tennessee seismic zone (ETSZ) may represent reactivation of an ancient shear zone that accommodated left-lateral, transpressive motion of the Amazon craton during the Grenville orogeny. Several different lines of evidence support this concept including velocity models for the crust, earthquake hypocenter alignments, focal mechanism solutions, potential field anomalies, paleomagnetic pole positions, and isotopic geochemical studies. The ETSZ trends NE-SW for about 300 km and displays remarkable correlation with the prominent New York - Alabama (NY-AL) aeromagnetic lineament. Vp and Vs models for the crust derived from a local ETSZ earthquake tomography study reveal the presence of a narrow, NE-SW trending, steeply dipping zone of low velocities that extends to a depth of at least 24 km and is associated with the vertical projection of the NY-AL aeromagnetic lineament. The low velocity zone is interpreted as a major basement fault. The recent Mw 4.2 Perry County eastern Kentucky earthquake occurred north of the ETSZ but has a focal depth and mechanism that are similar to those for ETSZ earthquakes. We investigate the possibility that the proposed ancient shear zone extends into eastern Kentucky using Bouguer and aeromagnetic maps. The southern end of the ETSZ is characterized by hypocenters that align along planes dipping at roughly 45 degrees and focal mechanisms that contain large normal faulting components. The NY-AL aeromagnetic lineament also changes trend in the southern end of the ETSZ and the exact location of the lineament is ambiguous. We suggest that the southern portion of the ETSZ involves reactivation of reverse faults (now as normal faults) that mark the ancient transition between a collisional to a more transpressive boundary between Amazonia and Laurentia during the formation of the super continent Rodinia.

Geology and U-Pb Zircon ages of the Kavacik Leucogranite in the Bornova Flysch Zone (Western Anatolia, Turkey)

NASA Astrophysics Data System (ADS)

Güngör, Talip; Hasözbek, Altuǧ; Akal, Cüneyt; Mertz-Kraus, Regina; Peştemalci Üregel, Reyhan

2016-04-01

The Bornova Flysch Zone comprises an olistostrome-melange situated NE-SW direction between the Izmir Ankara Suture Zone and the Menderes Massif. The Bornova Flysch Zone is mainly composed of slightly deformed Late Cretaceous to Paleocene sandstone and shale with Mesozoic limestone and oceanic crustal associations. These large-scale blocks in the matrix of the Bornova Flysch Zone are mostly defined as limestone, basalt, serpentinite and radiolarian cherts. In this study, granitic bodies, situated in the Bornova Flysch Zone, named as Kavacik leucogranite is examined for the first time, in terms its geological features and its U-Pb zircon crystallization ages. Kavacik leucogranite displays a typical granitic texture and its composition indicates ranging between granitic to granodioritic in composition with lack of mafic minerals. The geochemical features of the granite indicate the I-type and subalkaline nature of the granitic body. The geochemical signatures of the Kavacik granite points out Volcanic Arc Granitoids as similarly seen in Karaburun granite. U-Pb zircon LA ages were also obtained from the Kavacik granite ranging between 224.5 ± 2.0 Ma and 230.0 ± 2.8 Ma. Early Triassic zircon ages are also previously observed in the Karaburun Peninsula (Karaburun Granite) and the Menderes Massif (Odemis-Kiraz Submassif). The initial geological boundary relation of the Kavacik Leucogranite is not clear in the field and likely displays tectonic boundary features in the matrix of the Bornova Flysch Zone. Overall, the geochemical features of the Kavacik leucogranite and similar leucomagmatic bodies in the Western Anatolia points out the subduction-related tectonic setting is favorable during the Triassic time.

Evolution of the Sibişel Shear Zone (South Carpathians): A study of its type locality near Răşinari (Romania) and tectonic implications

NASA Astrophysics Data System (ADS)

Ducea, Mihai N.; Negulescu, Elena; Profeta, Lucia; Sǎbǎu, Gavril; Jianu, Denisa; Petrescu, Lucian; Hoffman, Derek

2016-09-01

The Sibişel Shear Zone is a 1-3 km wide, ductile shear zone located in the South Carpathian Mountains, Romania. In the Rășinari area, the ductile shear zone juxtaposes amphibolite facies rocks of the Lotru Metamorphic Suite against greenschist facies rocks of the Râuşorul Cisnădioarei Formation. The first represents the eroded remnants of Peri-Gondwanan arcs formed between the Neoproterozoic-Silurian (650-430 Ma), regionally metamorphosed to amphibolite facies during the Variscan orogeny (350-320 Ma). The second is composed of metasedimentary and metavolcanic Neoproterozoic-Ordovician (700-497 Ma) assemblages of mafic to intermediate bulk composition also resembling an island arc metamorphosed during the Ordovician (prior to 463 Ma). Between these lie the epidote amphibolite facies mylonitic and ultramylonitic rocks of the Sibișel Formation, a tectonic mélange dominated by mafic actinolite schists attenuated into a high strain ductile shear zone. Mineral Rb-Sr isochrons document the time of juxtaposition of the three domains during the Permian to Early Triassic ( 290-240 Ma). Ductile shear sense indicators suggest a right lateral transpressive mechanism of juxtaposition; the Sibişel shear zone is a remnant Permo-Triassic suture between two Early Paleozoic Gondwanan terranes. A zircon and apatite U-Th/He age transect across the shear zone yields Alpine ages (54-90 Ma apatite and 98-122 Ma zircon); these data demonstrate that the exposed rocks were not subjected to Alpine ductile deformation. Our results have significant implications for the assembly of Gondwanan terranes and their docking to Baltica during Pangea's formation. Arc terranes free of Variscan metamorphism existed until the Early Triassic, emphasizing the complex tectonics of terrane amalgamation during the closure of Paleotethys.

Megathrust and accretionary wedge properties and behaviour in the Makran subduction zone

NASA Astrophysics Data System (ADS)

Penney, Camilla; Tavakoli, Farokh; Saadat, Abdolreza; Nankali, Hamid Reza; Sedighi, Morteza; Khorrami, Fateme; Sobouti, Farhad; Rafi, Zahid; Copley, Alex; Jackson, James; Priestley, Keith

2017-06-01

We study the Makran subduction zone, along the southern coasts of Iran and Pakistan, to gain insights into the kinematics and dynamics of accretionary prism deformation. By combining techniques from seismology, geodesy and geomorphology, we are able to put constraints on the shape of the subduction interface and the style of strain across the prism. We also address the long-standing tectonic problem of how the right-lateral shear taken up by strike-slip faulting in the Sistan Suture Zone in eastern Iran is accommodated at the zone's southern end. We find that the subduction interface in the western Makran may be locked, accumulating elastic strain, and move in megathrust earthquakes. Such earthquakes, and associated tsunamis, present a significant hazard to populations around the Arabian Sea. The time-dependent strain within the accretionary prism, resulting from the megathrust earthquake cycle, may play an important role in the deformation of the Makran region. By considering the kinematics of the 2013 Balochistan and Minab earthquakes, we infer that the local gravitational and far-field compressive forces in the Makran accretionary prism are in balance. This force balance allows us to calculate the mean shear stress and effective coefficient of friction on the Makran megathrust, which we find to be 5-35 MPa and 0.01-0.03, respectively. These values are similar to those found in other subduction zones, showing that the abnormally high sediment thickness in the offshore Makran does not significantly reduce the shear stress on the megathrust.

Relationships Between RNA Polymerase II Activity and Spt Elongation Factors to Spt- Phenotype and Growth in Saccharomyces cerevisiae

PubMed Central

Cui, Ping; Jin, Huiyan; Vutukuru, Manjula Ramya; Kaplan, Craig D.

2016-01-01

The interplay between adjacent transcription units can result in transcription-dependent alterations in chromatin structure or recruitment of factors that determine transcription outcomes, including the generation of intragenic or other cryptic transcripts derived from cryptic promoters. Mutations in a number of genes in Saccharomyces cerevisiae confer both cryptic intragenic transcription and the Suppressor of Ty (Spt-) phenotype for the lys2-128∂ allele of the LYS2 gene. Mutants that suppress lys2-128∂ allow transcription from a normally inactive Ty1 ∂ promoter, conferring a LYS+ phenotype. The arrangement of transcription units at lys2-128∂ is reminiscent of genes containing cryptic promoters within their open reading frames. We set out to examine the relationship between RNA Polymerase II (Pol II) activity, functions of Spt elongation factors, and cryptic transcription because of the previous observation that increased-activity Pol II alleles confer an Spt- phenotype. We identify both cooperating and antagonistic genetic interactions between Pol II alleles and alleles of elongation factors SPT4, SPT5, and SPT6. We find that cryptic transcription at FLO8 and STE11 is distinct from that at lys2-128∂, though all show sensitivity to reduction in Pol II activity, especially the expression of lys2-128∂ found in Spt- mutants. We determine that the lys2-128∂ Spt- phenotypes for spt6-1004 and increased activity rpo21/rpb1 alleles each require transcription from the LYS2 promoter. Furthermore, we identify the Ty1 transcription start site (TSS) within the ∂ element as the position of Spt- transcription in tested Spt- mutants. PMID:27261007

Integrative Taxonomic Approach for Describing a New Cryptic Species of Bush Frog (Raorchestes: Anura: Rhacophoridae) from the Western Ghats, India

PubMed Central

Roshmi, Rekha Sarma; Ramya, Badrinath; Sudhira, H. S.; Ravikanth, G.; Aravind, Neelavara Anantharam

2016-01-01

A new cryptic species of bush frog Raorchestes honnametti sp. nov. is described from the south-eastern part of the Western Ghats, India. This newly described species belongs to the Charius clade and is morphologically similar to other clade members—R. charius and R. griet. Therefore, an integrative taxonomic approach based on molecular and bioacoustic analysis along with morphology was used to delimit the new species. Raorchestes honnametti sp. nov., is currently known only from Biligiri Rangaswamy Temple Tiger Reserve, a part of Biligiri Rangaswamy horst mountain range (a mountain formed due movement of two faults) formed during the Late Quaternary period (1.8–2.58 Ma). Discovery of cryptic species from a highly speciose and well-studied genus Raorchestes hints at the possible existence of several more cryptic species in this genus. We discuss the possible reasons for crypsis and emphasize the need for continued systematic surveys of amphibians across the Western Ghats. PMID:26934213

Carbohydrate Microarrays Identify Blood Group Precursor Cryptic Epitopes as Potential Immunological Targets of Breast Cancer

PubMed Central

Wang, Denong; Tang, Jin; Liu, Shaoyi

2015-01-01

Using carbohydrate microarrays, we explored potential natural ligands of antitumor monoclonal antibody HAE3. This antibody was raised against a murine mammary tumor antigen but was found to cross-react with a number of human epithelial tumors in tissues. Our carbohydrate microarray analysis reveals that HAE3 is specific for an O-glycan cryptic epitope that is normally hidden in the cores of blood group substances. Using HAE3 to screen tumor cell surface markers by flow cytometry, we found that the HAE3 glycoepitope, gpHAE3, was highly expressed by a number of human breast cancer cell lines, including some triple-negative cancers that lack the estrogen, progesterone, and Her2/neu receptors. Taken together, we demonstrate that HAE3 recognizes a conserved cryptic glycoepitope of blood group precursors, which is nevertheless selectively expressed and surface-exposed in certain breast tumor cells. The potential of this class of O-glycan cryptic antigens in breast cancer subtyping and targeted immunotherapy warrants further investigation. PMID:26539555

Ediacaran 2,500-km-long synchronous deep continental subduction in the West Gondwana Orogen

NASA Astrophysics Data System (ADS)

Ganade de Araujo, Carlos E.; Rubatto, Daniela; Hermann, Joerg; Cordani, Umberto G.; Caby, Renaud; Basei, Miguel A. S.

2014-10-01

The deeply eroded West Gondwana Orogen is a major continental collision zone that exposes numerous occurrences of deeply subducted rocks, such as eclogites. The position of these eclogites marks the suture zone between colliding cratons, and the age of metamorphism constrains the transition from subduction-dominated tectonics to continental collision and mountain building. Here we investigate the metamorphic conditions and age of high-pressure and ultrahigh-pressure eclogites from Mali, Togo and NE-Brazil and demonstrate that continental subduction occurred within 20 million years over at least a 2,500-km-long section of the orogen during the Ediacaran. We consider this to be the earliest evidence of large-scale deep-continental subduction and consequent appearance of Himalayan-scale mountains in the geological record. The rise and subsequent erosion of such mountains in the Late Ediacaran is perfectly timed to deliver sediments and nutrients that are thought to have been necessary for the subsequent evolution of sustainable life on Earth.

Electrical resistivity structure at the North-Central Turkey inferred from three-dimensional magnetotellurics

NASA Astrophysics Data System (ADS)

Özaydın, Sinan; Tank, Sabri Bülent; Karaş, Mustafa

2018-03-01

Magnetotelluric data analyses and three-dimensional modeling techniques were implemented to investigate the crustal electrical structure in the North-Central Turkey, along a 190-km-long profile crossing Çankırı Basin, İzmir-Ankara-Erzincan Suture Zone and Central Pontides. In this area, the segment of the North Anatolian Fault (NAF) shows 280-km-long restraining bend, where it was near the focus of the hazardous 1943 Tosya Earthquake (M: 7.6). Structure around the NAF exhibits resistive characteristics at both sides of the fault reaching to at least 25 km of depth. Fluids below the brittle-ductile transition were not detected which will nucleate earthquakes in the area. This resistive structure implies an asperity zone of the NAF, which was ruptured in 1943. The presence of a fluid-bearing upwelling conductive anomaly in Central Pontides may suggest that beneath the deep brittle crust, there may exists a fluid-enriched conductive forearc region, which may have caused by a prograde source related to paleo-tectonic processes.

A miniature tension sensor to measure surgical suture tension of deformable musculoskeletal tissues during joint motion.

PubMed

Kiriyama, Yoshimori; Matsumoto, Hideo; Toyama, Yoshiaki; Nagura, Takeo

2014-02-01

The aim of this study was to develop a new suture tension sensor for musculoskeletal soft tissue that shows deformation or movements. The suture tension sensor was 10 mm in size, which was small enough to avoid conflicting with the adjacent sensor. Furthermore, the sensor had good linearity up to a tension of 50 N, which is equivalent to the breaking strength of a size 1 absorbable suture defined by the United States Pharmacopeia. The design and mechanism were analyzed using a finite element model prior to developing the actual sensor. Based on the analysis, adequate material was selected, and the output linearity was confirmed and compared with the simulated result. To evaluate practical application, the incision of the skin and capsule were sutured during simulated total knee arthroplasty. When conventional surgery and minimally invasive surgery were performed, suture tensions were compared. In minimally invasive surgery, the distal portion of the knee was dissected, and the proximal portion of the knee was dissected additionally in conventional surgery. In the skin suturing, the maximum tension was 4.4 N, and this tension was independent of the sensor location. In contrast, the sensor suturing the capsule in the distal portion had a tension of 4.4 N in minimally invasive surgery, while the proximal sensor had a tension of 44 N in conventional surgery. The suture tensions increased nonlinearly and were dependent on the knee flexion angle. Furthermore, the tension changes showed hysteresis. This miniature tension sensor may help establish the optimal suturing method with adequate tension to ensure wound healing and early recovery.

Tendon-Holding Capacities of Two Newly Designed Implants for Tendon Repair: An Experimental Study on the Flexor Digitorum Profundus Tendon of Sheep

PubMed Central

Ağır, İsmail; Aytekin, Mahmut Nedim; Başçı, Onur; Çaypınar, Barış; Erol, Bülent

2014-01-01

Background: Two main factors determine the strength of tendon repair; the tensile strength of material and the gripping capacity of a suture configuration. Different repair techniques and suture materials were developed to increase the strength of repairs but none of techniques and suture materials seem to provide enough tensile strength with safety margins for early active mobilization. In order to overcome this problem tendon suturing implants are being developed. We designed two different suturing implants. The aim of this study was to measure tendon-holding capacities of these implants biomechanically and to compare them with frequently used suture techniques Materials and Methods: In this study we used 64 sheep flexor digitorum profundus tendons. Four study groups were formed and each group had 16 tendons. We applied model 1 and model 2 implant to the first 2 groups and Bunnell and locking-loop techniques to the 3rd and 4th groups respectively by using 5 Ticron sutures. Results: In 13 tendons in group 1 and 15 tendons in group 2 and in all tendons in group 3 and 4, implants and sutures pulled out of the tendon in longitudinal axis at the point of maximum load. The mean tensile strengths were the largest in group 1 and smallest in group 3. Conclusion: In conclusion, the new stainless steel tendon suturing implants applied from outside the tendons using steel wires enable a biomechanically stronger repair with less tendon trauma when compared to previously developed tendon repair implants and the traditional suturing techniques. PMID:25067965

Effects of implantation method and temperature on mortality and loss of simulated transmitters in hybrid striped bass

USGS Publications Warehouse

Walsh, M.G.; Bjorgo, K.A.; Isely, J.J.

2000-01-01

To determine the effects of surgical implantation method and temperature on mortality and transmitter loss, we compared two antenna placements (trailing antenna versus shielded needle) and two suture materials (absorbable versus nonabsorbable) in hybrid striped bass Morone saxitilis x Morone chrysops (227-410 mm total length) that had been surgically implanted with simulated transmitters and held at high (22-29??C) and low (12-18??C) temperatures for 120 d. Fish were individually examined after 7, 30, 60. 90. and 120 d to evaluate suture and wound condition as well as transmitter loss. Neither suture material nor antenna placement affected transmitter loss, mortality, or growth at either high or low temperatures. Absorbable sutures were lost more quickly than were nonabsorbable sutures, but they persisted beyond incision closure at both high and low temperatures. At high temperatures, 50% suture loss occurred by 30 d for absorbable sutures and by 60 d for nonabsorbable sutures. Mortality occurred only at high temperatures but was delayed and was likely caused by peritoneal infection. Transmitter loss was not significant; it occurred only in the low-temperature trial and was caused by pressure necrosis at the incision rather than by suture failure. Temperature significantly affected all responses examined in this study. Significant irritation, infection, and mortality occurred in all treatment groups at high temperatures.

New meniscus repair technique for peripheral tears near the posterior tibial attachment of the posterior horn of the medial meniscus.

PubMed

Park, In-Seop; Kim, Sung-Jae

2006-08-01

We introduce a suture technique to repair a peripheral tear near the posterior tibial attachment of the posterior horn. A suture hook was inserted through the posteromedial portal, and the peripheral capsular rim was penetrated from superior to inferior by the sharp hook. Both relay limbs were brought out through the posteromedial portal. The outer limb of the superior peripheral capsular rim was identified with a hemostat. An 18-gauge spinal needle loaded with a No. 0 polydioxanone suture (PDS) was introduced into the joint from the anteromedial portal; it was passed through the joint space until it penetrated the inner torn meniscus. The PDS suture loaded within the needle was pushed into the joint and picked up through the posteromedial portal. The needle was pulled out of the torn meniscus and readvanced over it while the suture was kept loaded. The other limb of the suture from the tip of the spinal needle was retrieved through the posteromedial portal. The initial PDS suture limb was hooked to the shuttle-relay system; it then was passed through the inner torn meniscus and the peripheral capsular rim. The suture limb exiting from the peripheral capsular rim was used as a post and was joined to the other suture limb to form a sliding knot.

Loop ileostomy closure: comparison of cost effectiveness between suture and stapler.

PubMed

Horisberger, Karoline; Beldi, Guido; Candinas, Daniel

2010-12-01

Closure of loop ileostomy can be safely performed using sutures or staplers. The aim of the present study was to compare the cost effectiveness of three different techniques. A total of 128 consecutive patients who underwent closure of loop ileostomy between January 2002 and December 2008 were analyzed retrospectively. The primary outcome parameter was operative cost. Closure of ileostomy was performed in 66 patients with hand-sewn anastomosis, in 25 patients with stapler only, and in 37 patients with a combination of stapler and suture. There were no differences in terms of early and late postoperative complications. Operative time was significantly longer for "suture only" (101.4 ± 26 min) than for "stapler/suture" (-4.9 min) and "stapler only" (-17.8 min); the difference between the three groups is significant (p = 0.05). Duration of hospital stay was not different among the three groups. Operative costs with "stapler/suture" (1,755.9 ± 355.6 EUR) were significantly higher than with "suture only" (-254 EUR; p = 0.001) and "stapler only" (-236 EUR; p = 0.005). Operative time using the stapler only is significantly shorter than with hand-sewn anastomosis or combinations of stapler and suture. Operative costs are significantly higher for a procedure that includes suture and stapler.

Securing stent during multi-stage laryngotracheoplasty--an evolved technique.

PubMed

Siegel, Bianca; Bent, John P

2015-09-01

Multi-stage laryngotracheoplasty (LTP) typically requires a stent be secured to the airway for 2-6 weeks. Our technique has evolved over time to securing the stent to the strap muscles and tying a series of knots long enough to leave the suture tail protruding through the skin incision, which simplifies stent removal. Retrospective chart review. Twenty-four patients underwent multi-stage LTP at our institution from 2007 to 2013. Eight patients were excluded from the study because they either did not have a stent placed (n=4), or they had a t-tube placed which was not sutured in place (n=4). Of the remaining 16 patients, 62.5% (n=10) had their stent secured via sutures which were buried below the skin, and 37.5% (n=6) via a long suture tail which was left protruding through the end of the skin incision. An incision was required for stent removal 100% of buried sutures patients, and 33% of exposed suture patients (p=0.0009). Average operative time for stent removal was 60min in the buried sutures group, and 25min in the exposed sutures group (p=0.0075). Securing stents via an exposed suture technique decreases the need for making a skin incision during the second stage of the operation, and significantly decreases the operative time of the second stage. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Cryptic Species or Inadequate Taxonomy? Implementation of 2D Geometric Morphometrics Based on Integumental Organs as Landmarks for Delimitation and Description of Copepod Taxa.

PubMed

Karanovic, Tomislav; Djurakic, Marko; Eberhard, Stefan M

2016-03-01

Discovery of cryptic species using molecular tools has become common in many animal groups but it is rarely accompanied by morphological revision, creating ongoing problems in taxonomy and conservation. In copepods, cryptic species have been discovered in most groups where fast-evolving molecular markers were employed. In this study at Yeelirrie in Western Australia we investigate a subterranean species complex belonging to the harpacticoid genus Schizopera Sars, 1905, using both the barcoding mitochondrial COI gene and landmark-based two-dimensional geometric morphometrics. Integumental organs (sensilla and pores) are used as landmarks for the first time in any crustacean group. Complete congruence between DNA-based species delimitation and relative position of integumental organs in two independent morphological structures suggests the existence of three distinct evolutionary units. We describe two of them as new species, employing a condensed taxonomic format appropriate for cryptic species. We argue that many supposedly cryptic species might not be cryptic if researchers focus on analyzing morphological structures with multivariate tools that explicitly take into account geometry of the phenotype. A perceived supremacy of molecular methods in detecting cryptic species is in our view a consequence of disparity of investment and unexploited recent advancements in morphometrics among taxonomists. Our study shows that morphometric data alone could be used to find diagnostic morphological traits and gives hope to anyone studying small animals with a hard integument or shell, especially opening the door to assessing fossil diversity and rich museum collections. We expect that simultaneous use of molecular tools with geometry-oriented morphometrics may yield faster formal description of species. Decrypted species in this study are a good example for urgency of formal descriptions, as they display short-range endemism in small groundwater calcrete aquifers in a paleochannel, where their conservation may be threatened by proposed mining. ©The Author(s) 2015. Published by Oxford University Press, on behalf of the Society of Systematic Biologists. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Nickel-Titanium Wire as Suture Material: A New Technique for the Fixation of Skin.

PubMed

Li, Haidong; Song, Tao

2018-01-29

To introduce nickel-titanium wire as suture material for closure of incisions in cleft lip procedures. Closure of skin incisions using nickel-titanium wire as suture material, with postoperative follow-up wound evaluation. There was excellent patient satisfaction and good cosmetic outcome. Nickel-titanium wire is an excellent alternative for suture closure of cleft lip surgical incisions.

A comparison of lateral ankle ligament suture anchor strength.

PubMed

Barber, F Alan; Herbert, Morley A; Crates, John M

2013-06-01

Lateral ankle ligament repairs increasingly use suture anchors instead of bone tunnels. Our purpose was to compare the biomechanical properties of a knotted and knotless suture anchor appropriate for a lateral ankle ligament reconstruction. In porcine distal fibulae, 10 samples of 2 different PEEK anchors were inserted. The attached sutures were cyclically loaded between 10N and 60N for 200 cycles. A destructive pull was performed and failure loads, cyclic displacement, stiffness, and failure mode recorded. PushLock 2.5 anchors failed before 200 cycles. PushLock 100 cycle displacement was less than Morphix 2.5 displacement (p<0.001). Ultimate failure load for anchors completing 200 cycles was 86.5N (PushLock) and 252.1N (Morphix) (p<0.05). The failure mode was suture breaking for all PushLocks while the Morphix failed equally by anchor breaking and suture breakage. The knotted Morphix demonstrated more displacement and greater failure strength than the knotless PushLock. The PushLock failed consistently with suture breaking. The Morphix anchor failed both by anchor breaking and by suture breaking. Copyright © 2012 European Foot and Ankle Society. Published by Elsevier Ltd. All rights reserved.

Comparison on effectiveness of trans-septal suturing versus nasal packing after septoplasty: a systematic review and meta-analysis.

PubMed

Wang, Wei-Wei; Dong, Bao-Cheng

2017-11-01

This systematic review applied meta-analytic procedures to evaluate the curative effect of trans-septal suturing versus nasal packing after septoplasty. Computerized search of the published literature in PubMed, EMBASE, CENTRAL, Cochrane Database of Systematic Reviews, WANFANG, CNKI databases. Randomized trials investigating trans-septal suturing versus nasal packing following septoplasty in patients with deviated nasal septum. Adhesion, septal hematoma, bleeding, septal perforation, infection, pain, headache, or residual septal deviation per randomized patients. 19 randomized controlled trials of 1845 subjects were included. Meta-analysis showed that postoperative pain, headache, and adhesion were significantly lower in trans-septal suturing group. Nasal packing and trans-septal suturing technique appear to be equivalent with regard to postoperative bleeding, hematoma, septal perforation, infection, and residual septal deviation. Trans-septal suturing technology is not only associated with less patient pain, headache, and lower occurrence rate of adhesion after septoplasty but it also relates to higher patient satisfaction and an improved quality of life. The suturing technology can be used as a substitute for traditional nasal packing of the first-line treatment. More well-designed studies are needed to confirm the effect of trans-septal suturing following septoplasty.

[Comparative study of the repair of full thickness tear of the supraspinatus by means of "single row" or "suture bridge" techniques].

PubMed

Arroyo-Hernández, M; Mellado-Romero, M A; Páramo-Díaz, P; Martín-López, C M; Cano-Egea, J M; Vilá Y Rico, J

2015-01-01

The purpose of this study is to analyze if there is any difference between the arthroscopic reparation of full-thickness supraspinatus tears with simple row technique versus suture bridge technique. We accomplished a retrospective study of 123 patients with full-thickness supraspinatus tears between January 2009 and January 2013 in our hospital. There were 60 simple row reparations, and 63 suture bridge ones. The mean age in the simple row group was 62.9, and in the suture bridge group was 63.3 years old. There were more women than men in both groups (67%). All patients were studied using the Constant test. The mean Constant test in the suture bridge group was 76.7, and in the simple row group was 72.4. We have also accomplished a statistical analysis of each Constant item. Strength was higher in the suture bridge group, with a significant statistical difference (p 0.04). The range of movement was also greater in the suture bridge group, but was not statistically significant. Suture bridge technique has better clinical results than single row reparations, but the difference is not statistically significant (p = 0.298).

DOE Office of Scientific and Technical Information (OSTI.GOV)

Noda, Kazuo, E-mail: knoda@kuhp.kyoto-u.ac.jp; Nakamura, Tomoyuki; Komatsu, Yoshihiro

Craniofacial sutures govern the shape of the craniofacial skeleton during postnatal development. The differentiation of suture mesenchymal cells to osteoblasts is precisely regulated in part by signaling through cell surface receptors that interact with extracellular proteins. Here we report that fibulin-5, a key extracellular matrix protein, is important for craniofacial skeletal development in mice. Fibulin-5 is deposited as a fibrous matrix in cranial neural crest-derived mesenchymal tissues, including craniofacial sutures. Fibulin-5-null mice show decreased premaxillary bone outgrowth during postnatal stages. While premaxillo-maxillary suture mesenchymal cells in fibulin-5-null mice were capable of differentiating into osteoblasts, suture cells in mutant mice weremore » less proliferative. Our study provides the first evidence that fibulin-5 is indispensable for the regulation of facial suture mesenchymal cell proliferation required for craniofacial skeletal morphogenesis. - Highlights: • Fibulin-5 is deposited in cranial neural crest-derived mesenchymal tissues. • Fibulin-5-null mice show decreased premaxillary bone growth during postnatal stage. • Fibulin-5 is indispensable for facial suture mesenchymal cell proliferation.« less

Intraplate mountain building in response to continent continent collision—the Ancestral Rocky Mountains (North America) and inferences drawn from the Tien Shan (Central Asia)

NASA Astrophysics Data System (ADS)

Dickerson, Patricia Wood

2003-04-01

The intraplate Ancestral Rocky Mountains of western North America extend from British Columbia, Canada, to Chihuahua, Mexico, and formed during Early Carboniferous through Early Permian time in response to continent-continent collision of Laurentia with Gondwana—the conjoined masses of Africa and South America, including Yucatán and Florida. Uplifts and flanking basins also formed within the Laurentian Midcontinent. On the Gondwanan continent, well inboard from the marginal fold belts, a counterpart structural array developed during the same period. Intraplate deformation began when full collisional plate coupling had been achieved along the continental margin; the intervening ocean had been closed and subduction had ceased—that is, the distinction between upper versus lower plates became moot. Ancestral Rockies deformation was not accompanied by volcanism. Basement shear zones that formed during Mesoproterozoic rifting of Laurentia were reactivated and exerted significant control on the locations, orientations, and modes of displacement on late Paleozoic faults. Ancestral Rocky Mountain uplifts extend as far south as Chihuahua and west Texas (28° to 33°N, 102° to 109°W) and include the Florida-Moyotes, Placer de Guadalupe-Carrizalillo, Ojinaga-Tascotal and Hueco Mountain blocks, as well as the Diablo and Central Basin Platforms. All are cored with Laurentian Proterozoic crystalline basement rocks and host correlative Paleozoic stratigraphic successions. Pre-late Paleozoic deformational, thermal, and metamorphic histories are similar as well. Southern Ancestral Rocky Mountain structures terminate along a line that trends approximately N 40°E (present coordinates), a common orientation for Mesoproterozoic extensional structures throughout southern to central North America. Continuing Tien Shan intraplate deformation (Central Asia) has created an analogous array of uplifts and basins in response to the collision of India with Eurasia, beginning in late Miocene time when full coupling of the colliding plates had occurred. As in the Laurentia-Gondwana case, structures of similar magnitude and spacing to those in Eurasia have developed in the Indian plate. Within the present orogen two ancient suture zones have been reactivated—the early Paleozoic Terskey zone and the late Paleozoic Turkestan suture between the Siberian and East Gondwanan cratons. Inverted Proterozoic to early Paleozoic rift structures and passive-margin deposits are exposed north of the Terskey zone. In the Alay and Tarim complexes, Vendian to mid-Carboniferous passive-margin strata and the subjacent Proterozoic crystalline basement have been uplifted. Data on Tien Shan uplifts, basins, structural arrays, and deformation rates guide paleotectonic interpretations of ancient intraplate mountain belts. Similarly, exhumed deep crustal shear zones in the Ancestral Rockies offer insight into partitioning and reorientation of strain during contemporary intraplate deformation.

[Mechanical suture in classic and laparoscopic general surgery].

PubMed

Alecu, L; Pascu, A; Deacu, A; Corodeanu, G; Marin, A; Costan, I

2000-01-01

Of this working is the study of employment the mechanical suture in general surgery classic and laparoscopic. We analysed the possibility of accomplishment and postoperatory evolution of 104 mechanical sutures performed in 24 patients, with diverse surgery pathology, operated in Department of General Surgery, between January 1999 and January 2000. Mechanical sutures allowed us to minimize the duration of surgical interventions and to perform some difficult anastomotic assembles (sometimes including creation of organ substitute). We had only two postoperatory fistulas and two postoperatory haemorrhages from anastomotic area (both cases because of bad closing of clips, through tissue excess between anvil and cartridge of the stapler). There are certain advantages in using mechanical sutures (versus manual sutures) consisting in decreasing of time period, both in operation itself and in hospitalization, despite their high level cost.

Post Thyroidectomy Suture Granuloma: A Cytological Diagnosis

PubMed Central

Javalgi, Anita P.; Arakeri, Surekha U.

2013-01-01

There are known post thyroidectomized complications, a suture granuloma being less frequent, with its late complication mimicking recurrent thyroid cancer. A suture granuloma is a benign, granulomatous inflammatory reaction that occurs due to the use of non absorbable suture. It constitutes one of the late complications which altogether make up less than 2% of its incidence. A suture granuloma is similar to a foreign body reaction and it usually develops slowly as a painless, palpable asymptomatic mass over the years. It mimics a cancer recurrence or a lymph node metastasis. Here, we are reporting a case of a post thyroidectomy suture granuloma in a 46 years old lady who presented with a painless swelling in the lateral neck, with a past history of thyroidectomy 5 years back. PMID:23730655

Suture Button Fixation Versus Syndesmotic Screws in Supination-External Rotation Type 4 Injuries: A Cost-Effectiveness Analysis.

PubMed

Neary, Kaitlin C; Mormino, Matthew A; Wang, Hongmei

2017-01-01

In stress-positive, unstable supination-external rotation type 4 (SER IV) ankle fractures, implant selection for syndesmotic fixation is a debated topic. Among the available syndesmotic fixation methods, the metallic screw and the suture button have been routinely compared in the literature. In addition to strength of fixation and ability to anatomically restore the syndesmosis, costs associated with implant use have recently been called into question. This study aimed to examine the cost-effectiveness of the suture button and determine whether suture button fixation is more cost-effective than two 3.5-mm syndesmotic screws not removed on a routine postoperative basis. Economic and decision analysis; Level of evidence, 2. Studies with the highest evidence levels in the available literature were used to estimate the hardware removal and failure rates for syndesmotic screws and suture button fixation. Costs were determined by examining the average costs for patients who underwent surgery for unstable SER IV ankle fractures at a single level-1 trauma institution. A decision analysis model that allowed comparison of the 2 fixation methods was developed. Using a 20% screw hardware removal rate and a 4% suture button hardware removal rate, the total cost for 2 syndesmotic screws was US$20,836 and the total effectiveness was 5.846. This yielded a total cost of $3564 per quality-adjusted life-year (QALY) over an 8-year time period. The total cost for suture button fixation was $19,354 and the total effectiveness was 5.904, resulting in a total cost of $3294 per QALY over the same time period. A sensitivity analysis was then conducted to assess suture button fixation costs as well as screw and suture button hardware removal rates. Other possible treatment scenarios were also examined, including 1 screw and 2 suture buttons for operative fixation of the syndesmosis. To become more cost-effective, the screw hardware removal rate would have to be reduced to less than 10%. Furthermore, fixation with a single suture button continued to be the dominant treatment strategy compared with 2 suture buttons, 1 screw, and 2 screws for syndesmotic fixation. This cost-effectiveness analysis suggests that for unstable SER IV ankle fractures, suture button fixation is more cost-effective than syndesmotic screws not removed on a routine basis. Suture button fixation was a dominant treatment strategy, because patients spent on average $1482 less and had a higher quality of life by 0.058 QALYs compared with patients who received fixation with 2 syndesmotic screws. Assuming that functional outcomes and failure rates were equivalent, screw fixation only became more cost-effective when the screw hardware removal rate was reduced to less than 10% or when the suture button cost exceeded $2000. In addition, fixation with a single suture button device proved more cost-effective than fixation with either 1 or 2 syndesmotic screws.

Nest Construction by a Ground-nesting Bird Represents a Potential Trade-off Between Egg Crypticity and Thermoregulation

EPA Science Inventory

Predation selects against conspicuous colors in bird eggs and nests, while thermoregulatory constraints select for nest building behavior that regulates incubation temperatures. We present results that reveal a trade-off between nest crypticity and thermoregulation of eggs base...

[Errors and dangers in intestinal sutures and anastomoses using stapler suture instruments (EEA, TA55, TA90, GIA)].

PubMed

Gögler, E

1985-01-01

In different tables the most important faults with enteral sutures and anastomoses in general and at special operations are demonstrated: end-to-end anastomoses with congruent diameter, anastomoses with different diameters, B I, B II, low anterior resection, esophago-jejunostomy. Only if the surgeon has experience in standard technique, faults and risks with mechanical staplers and manual sutures, the advantage-progress of staplers will be effective avoiding special risks. Surgeons without experience may produce real catastrophes which may turn out hopeless without training in manual suture technique.

Ureteroscopic holmium laser cutting for inadvertently sutured drainage tube (report of five cases).

PubMed

Gao, Xu; Lu, Xin; Ren, Shancheng; Xu, Chuanliang; Sun, Yinghao

2008-07-01

The aim of this paper is to report a simple solution for inadvertently sutured drainage tube after urological surgery and discuss the different managements according to different types of this embarrassing complication. From September 2001 to January 2007, five inadvertently sutured drainage tubes were treated with ureteroscopic holmium laser cutting for the suture. All drainage tubes were removed after the operation without other complications. Holmium laser cutting via ureteroscope is a simple solution for the embarrassing problem of inadvertently sutured drainage tube. It can save the patient from undergoing another open surgery.

Novel prototype sewing device, EndoSew®, for minimally invasive surgery: an extracorporeal ileal conduit construction pilot study in 10 patients.

PubMed

Roth, Beat; Birkhäuser, Frédéric D; Thalmann, George N; Zehnder, Pascal

2013-11-01

WHAT'S KNOWN ON THE SUBJECT? AND WHAT DOES THE STUDY ADD?: The EndoSew(®) prototype was first tested in a porcine model several years ago. The investigators found it both simple to master and reliable, its greatest advantage being a 2.4-fold time saving compared with straight laparoscopic suturing. In addition to that publication, there is a single case report describing the performance of an open EndoSew(®) suture to close parts (16 cm) of an ileal neobladder. The time for suturing the 16 cm ileum was 25 min, which is in line with our experience. The knowledge on this subject is limited to these two publications. We report on the first consecutive series of ileal conduits performed in humans using the novel prototype sewing device EndoSew(®). The study shows that the beginning and the end of the suture process represent the critical procedural steps. It also shows that, overall, the prototype sewing machine has the potential to facilitate the intracorporeal suturing required in reconstructive urology for construction of urinary diversions. To evaluate the feasibility and safety of the novel prototype sewing device EndoSew(®) in placing an extracorporeal resorbable running suture for ileal conduits. We conducted a prospective single-centre pilot study of 10 consecutive patients undergoing ileal conduit, in whom the proximal end of the ileal conduit was closed extracorporeally using an EndoSew(®) running suture. The primary endpoint was the safety of the device and the feasibility of the sewing procedure which was defined as a complete watertight running suture line accomplished by EndoSew(®) only. Watertightness was assessed using methylene blue intraoperatively and by loopography on postoperative days 7 and 14. Secondary endpoints were the time requirements and complications ≤30 days after surgery. A complete EndoSew(®) running suture was feasible in nine patients; the suture had to be abandoned in one patient because of mechanical failure. In three patients, two additional single freehand stitches were needed to anchor the thread and to seal tiny leaks. Consequently, all suture lines in 6/10 patients were watertight with EndoSew(®) suturing alone and in 10/10 patients after additional freehand stitches. The median (range) sewing time was 5.5 (3-10) min and the median (range) suture length was 4.5 (2-5.5) cm. There were no suture-related complications. The EndoSew(®) procedure is both feasible and safe. After additional freehand stitches in four patients all sutures were watertight. With further technical refinements, EndoSew(®) has the potential to facilitate the intracorporeal construction of urinary diversions. © 2013 BJU International.

Cyclic loading of rotator cuff reconstructions: single-row repair with modified suture configurations versus double-row repair.

PubMed

Lorbach, Olaf; Bachelier, Felix; Vees, Jochen; Kohn, Dieter; Pape, Dietrich

2008-08-01

Double-row repair is suggested to have superior biomechanical properties in rotator cuff reconstruction compared with single-row repair. However, double-row rotator cuff repair is frequently compared with simple suture repair and not with modified suture configurations. Single-row rotator cuff repairs with modified suture configurations have similar failure loads and gap formations as double-row reconstructions. Controlled laboratory study. We created 1 x 2-cm defects in 48 porcine infraspinatus tendons. Reconstructions were then performed with 4 single-row repairs and 2 double-row repairs. The single-row repairs included transosseous simple sutures; double-loaded corkscrew anchors in either a double mattress or modified Mason-Allen suture repair; and the Magnum Knotless Fixation Implant with an inclined mattress. Double-row repairs were either with Bio-Corkscrew FT using modified Mason-Allen stitches or a combination of Bio-Corkscrew FT and PushLock anchors using the SutureBridge Technique. During cyclic load (10 N to 60-200 N), gap formation was measured, and finally, ultimate load to failure and type of failure were recorded. Double-row double-corkscrew anchor fixation had the highest ultimate tensile strength (398 +/- 98 N) compared to simple sutures (105 +/- 21 N; P < .0001), single-row corkscrews using a modified Mason-Allen stitch (256 +/- 73 N; P = .003) or double mattress repair (290 +/- 56 N; P = .043), the Magnum Implant (163 +/- 13 N; P < .0001), and double-row repair with PushLock and Bio-Corkscrew FT anchors (163 +/- 59 N; P < .0001). Single-row double mattress repair was superior to transosseous sutures (P < .0001), the Magnum Implant (P = .009), and double-row repair with PushLock and Bio-Corkscrew FT anchors (P = .009). Lowest gap formation was found for double-row double-corkscrew repair (3.1 +/- 0.1 mm) compared to simple sutures (8.7 +/- 0.2 mm; P < .0001), the Magnum Implant (6.2 +/- 2.2 mm; P = .002), double-row repair with PushLock and Bio-Corkscrew FT anchors (5.9 +/- 0.9 mm; P = .008), and corkscrews with modified Mason-Allen sutures (6.4 +/- 1.3 mm; P = .001). Double-row double-corkscrew anchor rotator cuff repair offered the highest failure load and smallest gap formation and provided the most secure fixation of all tested configurations. Double-loaded suture anchors using modified suture configurations achieved superior results in failure load and gap formation compared to simple suture repair and showed similar loads and gap formation with double-row repair using PushLock and Bio-Corkscrew FT anchors. Single-row repair with modified suture configurations may lead to results comparable to several double-row fixations. If double-row repair is used, modified stitches might further minimize gap formation and increase failure load.

Biomechanical advantages of triple-loaded suture anchors compared with double-row rotator cuff repairs.

PubMed

Barber, F Alan; Herbert, Morley A; Schroeder, F Alexander; Aziz-Jacobo, Jorge; Mays, Matthew M; Rapley, Jay H

2010-03-01

To evaluate the strength and suture-tendon interface security of various suture anchors triply and doubly loaded with ultrahigh-molecular weight polyethylene-containing sutures and to evaluate the relative effectiveness of placing these anchors in a single-row or double-row arrangement by cyclic loading and then destructive testing. The infraspinatus muscle was reattached to the original humeral footprint by use of 1 of 5 different repair patterns in 40 bovine shoulders. Two single-row repairs and three double-row repairs were tested. High-strength sutures were used for all repairs. Five groups were studied: group 1, 2 triple-loaded screw suture anchors in a single row with simple stitches; group 2, 2 triple-loaded screw anchors in a single row with simple stitches over a fourth suture passed perpendicularly ("rip-stop" stitch); group 3, 2 medial and 2 lateral screw anchors with a single vertical mattress stitch passed from the medial anchors and 2 simple stitches passed from the lateral anchors; group 4, 2 medial double-loaded screw anchors tied in 2 mattress stitches and 2 push-in lateral anchors capturing the medial sutures in a "crisscross" spanning stitch; and group 5, 2 medial double-loaded screw anchors tied in 2 mattress stitches and 2 push-in lateral anchors creating a "suture-bridge" stitch. The specimens were cycled between 10 and 180 N at 1.0 Hz for 3,500 cycles or until failure. Endpoints were cyclic loading displacement (5 and 10 mm), total displacement, and ultimate failure load. A single row of triply loaded anchors was more resistant to stretching to a 5- and 10-mm gap than the double-row repairs with or without the addition of a rip-stop suture (P < .05). The addition of a rip-stop stitch made the repair more resistant to gap formation than a double row repair (P < .05). The crisscross double row created by 2 medial double-loaded suture anchors and 2 lateral push-in anchors stretched more than any other group (P < .05). Double-row repairs with either crossing sutures or 4 separate anchor points were more likely to fail (5- or 10-mm gap) than a single-row repair loaded with 3 simple sutures. The triple-loaded anchors with ultrahigh-molecular weight polyethylene-containing sutures placed in a single row were more resistant to stretching than the double-row groups. Copyright 2010 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.

Knotted versus knotless suture bridge repair of the achilles tendon insertion: a biomechanical study.

PubMed

Cox, Joseph T; Shorten, Peter L; Gould, Gregory C; Markert, Ronald J; Barnett, Michael D; Laughlin, Richard T

2014-11-01

Surgical treatment of insertional Achilles tendinopathy often involves detachment and debridement of the Achilles tendon insertion. A recent study has shown that knotted suture bridge fixation of the Achilles to the calcaneus is biomechanically superior to single-row fixation, but there is an absence of literature on the use of different suture bridge constructs to repair the Achilles tendon. There will be no significant difference in the load to failure, mode of failure, tendon strain, tendon stiffness, repair site gapping, or footprint size when comparing knotted suture bridge repair to knotless suture bridge repair of the Achilles tendon after detachment for insertional Achilles tendinopathy. Controlled laboratory study. A single specimen from each pair of 10 cadaveric Achilles tendons was randomized to 1 of 2 Achilles insertion repair groups: knotted (n = 10) or knotless (n = 10) suture bridge repair. Repaired footprint size was measured, and then cyclic testing from 10 to 100 N for 2000 cycles was performed. This was followed by measurement of tendon strain, repair site displacement, load to failure, and tendon stiffness. The knotted suture bridge repair had a significantly higher load to failure compared with the knotless suture bridge (mean ± SD, 317.8 ± 93.6 N vs 196.1 ± 12.1 N, respectively; P = .001). All constructs failed at the tendon-suture interface. Tendon strain after cyclic testing was significantly greater in the knotless (1.20 ± 1.05) compared with the knotted (0.39 ± 0.4) suture repair groups (P = .011). There was no significant difference in footprint size between the knotted (230.3 ± 63.3 mm(2)) and knotless (248.5 ± 48.8 mm(2)) groups (P = .40). There was also no significant difference in stiffness (knotted = 76.4 ± 8.0 N/mm; knotless = 69.6 ± 10.9 N/mm; P = .17) and repair site displacement after cyclic testing (knotted = 2.8 ± 1.2 mm; knotless = 3.6 ± 1.1 mm; P = .17). During suture bridge repair of the Achilles tendon after detachment, knots at the proximal suture anchors significantly improve the biomechanical strength of the repair. This study demonstrated that the knotless suture bridge repair had a significantly lower load to failure than the knotted suture bridge. Surgeons should be aware of these biomechanical differences, as they influence the postoperative rehabilitation protocol and may lead to higher surgical complication rates. © 2014 The Author(s).

Oblique collision and deformation partitioning in the SW Iberian Variscides

NASA Astrophysics Data System (ADS)

Pérez-Cáceres, Irene; Simancas, José Fernando; Martínez Poyatos, David; Azor, Antonio; González Lodeiro, Francisco

2016-05-01

Different transpressional scenarios have been proposed to relate kinematics and complex deformation patterns. We apply the most suitable of them to the Variscan orogeny in SW Iberia, which is characterized by a number of successive left-lateral transpressional structures developed in the Devonian to Carboniferous period. These structures resulted from the oblique convergence between three continental terranes (Central Iberian Zone, Ossa-Morena Zone and South Portuguese Zone), whose amalgamation gave way to both intense shearing at the suture-like contacts and transpressional deformation of the continental pieces in-between, thus showing strain partitioning in space and time. We have quantified the kinematics of the collisional convergence by using the available data on folding, shearing and faulting patterns, as well as tectonic fabrics and finite strain measurements. Given the uncertainties regarding the data and the boundary conditions modeled, our results must be considered as a semi-quantitative approximation to the issue, though very significant from a regional point of view. The total collisional convergence surpasses 1000 km, most of them corresponding to left-lateral displacement parallel to terrane boundaries. The average vector of convergence is oriented E-W (present-day coordinates), thus reasserting the left-lateral oblique collision in SW Iberia, in contrast with the dextral component that prevailed elsewhere in the Variscan orogen. This particular kinematics of SW Iberia is understood in the context of an Avalonian plate salient currently represented by the South Portuguese Zone.

The Tanami deep seismic reflection experiment: An insight into gold mineralization and Paleoproterozoic collision in the North Australian Craton

NASA Astrophysics Data System (ADS)

Goleby, Bruce R.; Huston, David L.; Lyons, Patrick; Vandenberg, Leon; Bagas, Leon; Davies, Brett M.; Jones, Leonie E. A.; Gebre-Mariam, Musie; Johnson, Wade; Smith, Tim; English, Luc

2009-07-01

Imaging of a major collision zone between the Tanami region and Aileron Province of the Arunta Orogen in Northern Australia, and recognition that several of the major gold deposits within the Tanami region are within near-surface antiformal stacks or uplifted and exhumed crustal sections associated with major crustal-penetrating shear zones, are fundamental results from the 2005 Tanami Seismic Collaborative Research Project. The suture, which is interpreted to have resulted from collision, separates the northwest-dipping structural grain of the Aileron Province crust in the south from the southeast-dipping structural grain of the Tanami crust in the northwest. The collision between the Tanami region and the Aileron Province is interpreted to have occurred prior to ca. 1840 Ma. The correlation between the surface extension of crustal-penetrating shear zones that extend to the Moho boundary and the locations of known gold-rich mineral fields is significant and has implications for minerals explorers within the Tanami region, and elsewhere. In the near-surface, where the crustal-penetrating structures cut relatively shallow upper crustal Tanami Group rocks, there is a significant increase in the degree of local deformation and results in through-going thrust faults, associated pop-up structures, ramp anticlines and antiformal stacking. All known ore deposits appear to be located within these more complexly deformed zones and therefore have a direct association with larger-scale structures.

A multiplex PCR method for rapid identification of Brachionus rotifers.

PubMed

Vasileiadou, Kalliopi; Papakostas, Spiros; Triantafyllidis, Alexander; Kappas, Ilias; Abatzopoulos, Theodore J

2009-01-01

Cryptic species are increasingly being recognized in many organisms. In Brachionus rotifers, many morphologically similar yet genetically distinct species/biotypes have been described. A number of Brachionus cryptic species have been recognized among hatchery strains. In this study, we present a simple, one-step genetic method to detect the presence of those Brachionus sp. rotifers that have been found in hatcheries. With the proposed technique, each of the B. plicatilis sensu stricto, B. ibericus, Brachionus sp. Nevada, Brachionus sp. Austria, Brachionus sp. Manjavacas, and Brachionus sp. Cayman species and/or biotypes can be identified with polymerase chain reaction (PCR) analysis. Based on 233 cytochrome c oxidase subunit I sequences, we reviewed all the available cryptic Brachionus sp. genetic polymorphisms, and we designed six nested primers. With these primers, a specific amplicon of distinct size is produced for every one of the involved species/biotypes. Two highly sensitive protocols were developed for using the primers. Many of the primers can be combined in the same PCR. The proposed method has been found to be an effective and practical tool to investigate the presence of the above six cryptic species/biotypes in both individual and communal (bulk) rotifer deoxyribonucleic acid extractions from hatcheries. With this technique, hatchery managers could easily determine their rotifer composition at the level of cryptic species and monitor their cultures more efficiently.

Predation cues rather than resource availability promote cryptic behaviour in a habitat-forming sea urchin.

PubMed

Spyksma, Arie J P; Taylor, Richard B; Shears, Nick T

2017-03-01

It is well known that predators often influence the foraging behaviour of prey through the so-called "fear effect". However, it is also possible that predators could change prey behaviour indirectly by altering the prey's food supply through a trophic cascade. The predator-sea urchin-kelp trophic cascade is widely assumed to be driven by the removal of sea urchins by predators, but changes in sea urchin behaviour in response to predators or increased food availability could also play an important role. We tested whether increased crevice occupancy by herbivorous sea urchins in the presence of abundant predatory fishes and lobsters is a response to the increased risk of predation, or an indirect response to higher kelp abundances. Inside two New Zealand marine reserves with abundant predators and kelp, individuals of the sea urchin Evechinus chloroticus were rarer and remained cryptic (i.e. found in crevices) to larger sizes than on adjacent fished coasts where predators and kelp are rare. In a mesocosm experiment, cryptic behaviour was induced by simulated predation (the addition of crushed conspecifics), but the addition of food in the form of drift kelp did not induce cryptic behaviour. These findings demonstrate that the 'fear' of predators is more important than food availability in promoting sea urchin cryptic behaviour and suggest that both density- and behaviourally mediated interactions are important in the predator-sea urchin-kelp trophic cascade.

Morphometric study of third-instar larvae from five morphotypes of the Anastrepha fraterculus cryptic species complex (Diptera, Tephritidae)

PubMed Central

Canal, Nelson A.; Hernández-Ortiz, Vicente; Salas, Juan O. Tigrero; Selivon, Denise

2015-01-01

Abstract The occurrence of cryptic species among economically important fruit flies strongly affects the development of management tactics for these pests. Tools for studying cryptic species not only facilitate evolutionary and systematic studies, but they also provide support for fruit fly management and quarantine activities. Previous studies have shown that the South American fruit fly, Anastrepha fraterculus, is a complex of cryptic species, but few studies have been performed on the morphology of its immature stages. An analysis of mandible shape and linear morphometric variability was applied to third-instar larvae of five morphotypes of the Anastrepha fraterculus complex: Mexican, Andean, Ecuadorian, Peruvian and Brazilian-1. Outline geometric morphometry was used to study the mouth hook shape and linear morphometry analysis was performed using 24 linear measurements of the body, cephalopharyngeal skeleton, mouth hook and hypopharyngeal sclerite. Different morphotypes were grouped accurately using canonical discriminant analyses of both the geometric and linear morphometry. The shape of the mandible differed among the morphotypes, and the anterior spiracle length, number of tubules of the anterior spiracle, length and height of the mouth hook and length of the cephalopharyngeal skeleton were the most significant variables in the linear morphometric analysis. Third-instar larvae provide useful characters for studies of cryptic species in the Anastrepha fraterculus complex. PMID:26798253

Mitochondrial phylogeny of grey mullets (Acanthopterygii: Mugilidae) suggests high proportion of cryptic species.

PubMed

Durand, Jean-Dominique; Borsa, Philippe

2015-04-01

The low level of morphometric variability and the poor phylogenetic information borne by the morpho-anatomical characters used thus far in the systematics of grey mullets (Mugilidae) emphasize the utility of molecular systematics in this family. A recent mitochondrial phylogeny of grey mullets has uncovered multiple deep lineages within several species, flagging putative cryptic species. Here, we considered that several of the deeply divergent lineages represent separate species based on either the tree topology, independent data from nuclear markers, geographic distributions, or a combination of the foregoing. By analogy with these well-documented cases, we considered other deep lineages in seven genera we focused on to represent putative cryptic species. Up to two cryptic species were thus potentially detected in the genus Chelon, three in Crenimugil (including two within the single Crenimugil seheli), two in Dajaus, one in Ellochelon, 16 in Mugil (including 13 within the single M. cephalus), two in Osteomugil, and 10 in Planiliza. Wherever possible, we kept the current species epithets to designate those lineages that unambiguously correspond to the type material, based on type locality, and we assigned arbitrary letters (sp. A, B, etc.) to the other lineages. We present a molecular diagnosis for 24 of the species analysed in this work, as well as for 25 putative cryptic species. Copyright © 2015 Académie des sciences. Published by Elsevier SAS. All rights reserved.

Biomechanical evaluation of a transtibial pull-out meniscal root repair: challenging the bungee effect.

PubMed

Cerminara, Anthony J; LaPrade, Christopher M; Smith, Sean D; Ellman, Michael B; Wijdicks, Coen A; LaPrade, Robert F

2014-12-01

A common treatment for posterior meniscal root tears is transtibial pull-out repair, which has been biomechanically reported to restore tibiofemoral contact mechanics to those of the intact knee. Biomechanical data suggest that there is significant displacement of the repaired meniscal root with cyclic loading, which may be responsible for the poor healing and meniscal extrusion demonstrated in some clinical studies. The purpose of this study was to quantify the time-zero displacement of the posterior meniscal root in response to cyclic loading after transtibial pull-out repair and to quantify the individual contributions to displacement of the following: (1) suture elongation, (2) button-bone interface, and (3) meniscus-suture interface. The meniscus-suture interface was hypothesized to result in significantly more displacement than the button-bone interface or suture elongation. Descriptive laboratory study. Transtibial pull-out repair of the posterior medial meniscal root was performed in 6 porcine knees, and cyclic displacement was measured using a loading protocol representative of postoperative rehabilitation. Displacement from (1) suture elongation, (2) the button-bone interface, and (3) the meniscus-suture interface was determined by cyclically loading 6 specimens for each construct using the same loading protocol to determine the contribution of each component to the overall displacement of the repair construct. After 1000 cycles, the repair construct displaced by a mean of 3.28 mm (95% CI, 2.07-4.49). The meniscus-suture component (mean, 2.52 mm; 95% CI, 2.21-2.83) displaced significantly more than the button-bone component (mean, 0.90 mm; 95% CI, 0.64-1.15; P = .006) and suture elongation component (mean, 0.71 mm; 95% CI, 0.36-1.06; P = .006) after 1000 cycles. Displacement of the button-bone and suture elongation components was not significantly different after 1000 cycles (P = .720). There was substantial displacement of the posterior medial meniscal root repaired with the transtibial pull-out technique under a cyclic loading protocol simulating postoperative rehabilitation. The meniscus-suture interface contributed to significantly more displacement than the button-bone interface and suture elongation in the transtibial pull-out repair construct. The results provide a framework for optimizing the transtibial pull-out repair technique. Future studies should focus on improving suture fixation strength within the meniscus-suture interface. © 2014 The Author(s).

Automation of a suturing device for minimally invasive surgery.

PubMed

Göpel, Tobias; Härtl, Felix; Schneider, Armin; Buss, Martin; Feussner, Hubertus

2011-07-01

In minimally invasive surgery, hand suturing is categorized as a challenge in technique as well as in its duration. This calls for an easily manageable tool, permitting an all-purpose, cost-efficient, and secure viscerosynthesis. Such a tool for this field already exists: the Autosuture EndoStitch(®). In a series of studies the potential for the EndoStitch to accelerate suturing has been proven. However, its ergonomics still limits its applicability. The goal of this study was twofold: propose an optimized and partially automated EndoStitch and compare the conventional EndoStitch to the optimized and partially automated EndoStitch with respect to the speed and precision of suturing. Based on the EndoStitch, a partially automated suturing tool has been developed. With the aid of a DC motor, triggered by a button, one can suture by one-fingered handling. Using the partially automated suturing manipulator, 20 surgeons with different levels of laparoscopic experience successfully completed a continuous suture with 10 stitches using the conventional and the partially automated suture manipulator. Before that, each participant was given 1 min of instruction and 1 min for training. Absolute suturing time and stitch accuracy were measured. The quality of the automated EndoStitch with respect to manipulation was tested with the aid of a standardized questionnaire. To compare the two instruments, t tests were used for suturing accuracy and time. Of the 20 surgeons with laparoscopic experience (fewer than 5 laparoscopic interventions, n=9; fewer than 20 laparoscopic interventions, n=7; more than 20 laparoscopic interventions, n=4), there was no significant difference between the two tested systems with respect to stitching accuracy. However, the suturing time was significantly shorter with the Autostitch (P=0.01). The difference in accuracy and speed was not statistically significant considering the laparoscopic experience of the surgeons. The weight and size of the Autostitch have been criticized as well as its cable. However, the comfortable handhold, automatic needle change, and ergonomic manipulation have been rated positive. Partially automated suturing in minimally invasive surgery offers advantages with respect to the speed of operation and ergonomics. Ongoing work in this field has to concentrate on minimization, implementation in robotic systems, and development of new operation methods (NOTES).

Acoustic differentiation and behavioral response reveals cryptic species within Buergeria treefrogs (Anura, Rhacophoridae) from Taiwan

PubMed Central

Wang, Ying-Han; Tseng, Hui-Yun; Lin, Yen-Po; Komaki, Shohei

2017-01-01

Buergeria japonica is a widely distributed treefrog occurring from Ryukyu Archipelago to Taiwan. Across this wide distributional range, we combined molecular, acoustic, morphological, and behavioral characters to clarify the taxonomic status among these insular populations. Genetic differentiation in mitochondrial sequences indicated an over 16% divergence among two deeply divergent clades: Japanese clade distributes in Ryukyu Archipelago and northwestern drainages of Taiwan, while Taiwanese clade distributes in the remaining drainages on Taiwan. The Taiwanese clade can be distinguished from the nominative species not only by molecular and morphological differences, but also distinguishable by considerable acoustic differentiation, which is extraordinarily noticeable for an additional type of long call that never recorded from Japanese clade. The two clades form a parapatric distribution pattern with narrow contact zones both in western and eastern Taiwan. Playback experiments indicated that male frogs show significantly stronger defensiveness against conspecific calls rather than heterospecific calls, indicating that these signals play a crucial role in species recognition. Here we describe the Taiwanese clade as a new species; the behavioral response and the magnitude of gene flow across their contact zones are especially worth for detailed studies. PMID:28877201

Isotopic and chemical evidence concerning the genesis and contamination of basaltic and rhyolitic magma beneath the Yellowstone Plateau Volcanic Field

USGS Publications Warehouse

Hildreth, W.; Halliday, A.N.; Christiansen, R.L.

1991-01-01

Since 2.2 Ma, the Yellowstone Plateau Volcanic Field has produced ~6000 km3 of rhyolite tuffs and lavas in >60 separate eruptions, as well as ~100 km3 of tholeiitic basalt from >50 vents peripheral to the silicic focus. Intermediate eruptive products are absent. Early postcollapse rhyolites show large shifts in Nd, Sr, Pb, and O isotopic composition caused by assimilation of roof rocks and hydrothermal brines during collapse and resurgence. Younger intracaldera rhyolite lavas record partial isotopic recovery toward precaldera ratios. Thirteen extracaldera rhyolites show none of these effects and have sources independent of the subcaldera magma system. Contributions from the Archaean crust have extreme values and wide ranges of Nd-, Sr, and Pb-isotope ratios, but Yellowstone rhyolites have moderate values and limited ranges. This requires their deep-crustal sources to have been pervasively hybridized by distributed intrusion of Cenozoic basalt, most of which was probably contemporaneous with the Pliocene and Quaternary volcanism. Most Yellowstone basalts had undergone cryptic clinopyroxene fractionation in the lower crust or crust-mantle transition zone and, having also ascended through or adjacent to crustal zones of silicic-magma generation, most underwent some crustal contamination. -from Authors

Cryptic oxygen cycling in anoxic marine zones.

PubMed

Garcia-Robledo, Emilio; Padilla, Cory C; Aldunate, Montserrat; Stewart, Frank J; Ulloa, Osvaldo; Paulmier, Aurélien; Gregori, Gerald; Revsbech, Niels Peter

2017-08-01

Oxygen availability drives changes in microbial diversity and biogeochemical cycling between the aerobic surface layer and the anaerobic core in nitrite-rich anoxic marine zones (AMZs), which constitute huge oxygen-depleted regions in the tropical oceans. The current paradigm is that primary production and nitrification within the oxic surface layer fuel anaerobic processes in the anoxic core of AMZs, where 30-50% of global marine nitrogen loss takes place. Here we demonstrate that oxygenic photosynthesis in the secondary chlorophyll maximum (SCM) releases significant amounts of O 2 to the otherwise anoxic environment. The SCM, commonly found within AMZs, was dominated by the picocyanobacteria Prochlorococcus spp. Free O 2 levels in this layer were, however, undetectable by conventional techniques, reflecting a tight coupling between O 2 production and consumption by aerobic processes under apparent anoxic conditions. Transcriptomic analysis of the microbial community in the seemingly anoxic SCM revealed the enhanced expression of genes for aerobic processes, such as nitrite oxidation. The rates of gross O 2 production and carbon fixation in the SCM were found to be similar to those reported for nitrite oxidation, as well as for anaerobic dissimilatory nitrate reduction and sulfate reduction, suggesting a significant effect of local oxygenic photosynthesis on Pacific AMZ biogeochemical cycling.

An alternative treatment modality in closing bladder exstrophy: use of rectus abdominus muscle flap--preliminary results in a rat model.

PubMed

Büyükünal, S N; Kaner, G; Celayir, S

1989-06-01

The aim of this study was to find a new alternate method for bladder exstrophies with small capacity and inelasticity, and to resolve complications of other bladder augmentation techniques. In 50 Wistar albino rats, a large bladder defect was created excising at least one half of their original bladder, keeping the peritrigonal zone intact. In each rat, a 2.5 x 1-cm inferiorly based rectus abdominus muscle flap was prepared from the lower abdominal quadrant. This flap was then rotated to cover the bladder defect. The inner layer formed by the peritoneum was sutured to the edges of the bladder defect by 6-0 separate sutures. The post-operative radiologic and scintigraphic examination of the urinary system done at different intervals showed no difference from that of normal rats. The only observed disadvantage of this technique was the formation of calculi in the bladder in 8/50 rats in the late post-operative period. Post-mortem histopathologic investigations performed at different intervals showed the inner layer of the flap to be completely covered by the transitional urinary epithelium of the bladder. We think this technique is easy to perform, non-time-consuming, and has a low complication rate. It may be useful in infants with small, noncompliant, inelastic bladder exstrophies.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bocharova, N.Yu.; Scotese, C.R.; Pristavakina, E.I.

A digital geographic database for the former USSR was compiled using published geologic and geodynamic maps and the unpublished suture map of Lev Zonenshain (1991). The database includes more than 900 tectonic features: strike-slip faults, sutures, thrusts, fossil and active rifts, fossil and active subduction zones, boundaries of the major and minor Precambrian blocks, ophiolites, and various volcanic complexes. The attributes of each structural unit include type of structure, name, age, tectonic setting and geographical coordinates. Paleozoic and Early Mesozoic reconstructions of the former USSR and adjacent regions were constructed using this tectonic database together with paleomagnetic data and themore » motions of continent over fixed hot spots. Global apparent polar wander paths in European and Siberian coordinates were calculated back to Cambrian time, using the paleomagnetic pole summaries of Van der Voo (1992) and Khramov (1992) and the global plate tectonic model of the Paleomap Project (Scotese and Becker, 1992). Trajectories of intraplate volcanics in South Siberia, Mongolia, Scandinavia and data on the White Mountain plutons and Karoo flood basalts were also taken into account. Using new data, the authors recalculated the stage and finite poles for the rotation of the Siberia and Europe with respect to the hot spot reference frame for the time interval 160 to 450 Ma.« less

Effect of Adhesive Strips and Dermal Sutures vs Dermal Sutures Only on Wound Closure: A Randomized Clinical Trial.

PubMed

Custis, Trenton; Armstrong, April W; King, Thomas H; Sharon, Victoria R; Eisen, Daniel B

2015-08-01

Although applying adhesive strips to a wound closure has been shown to have outcomes equivalent to those with cuticular suturing, it is unknown whether adhesive strips provide additional benefit compared with dermal suturing alone. To determine whether the addition of adhesive strips to a wound closed with buried interrupted subcuticular sutures improves outcomes following wound closure. A prospective, randomized split-wound intervention was conducted between November 14, 2013, and May 16, 2014, in patients who underwent cutaneous surgical procedures at the University of California, Davis, outpatient dermatology clinic. Fifty-seven patients 18 years or older with postoperative defects of at least 3 cm, resulting from either Mohs micrographic surgical procedures or surgical excision, were screened for participation. Nine patients were excluded and 48 were enrolled. Half of each wound was randomized to receive buried interrupted subcuticular sutures and overlying adhesive strips and the other half received buried interrupted subcuticular sutures only. At 3 months' follow-up, each patient and 2 blinded observers evaluated the wound using the Patient Observer Scar Assessment Scale. The total mean (SD) Patient Observer Scar Assessment Scale score for observers for the side that received a combination of adhesive strips and buried interrupted subcuticular suturing (12.3 [4.8]) and the side that received sutures only (12.9 [6.3]) did not differ significantly at 3 months (P = .32). There was no significant difference in the total patient assessment scale score between the combination closure (14.0 [7.6]) and sutures only (14.7 [7.6]) sides at 3 months (P = .39). There was also no significant difference between the 2 closure methods in terms of mean (SD) scar width (both methods: 1.1 [0.8] mm, P = .89) at follow-up. Combination closure with adhesive strips and buried interrupted subcuticular suturing was not significantly associated with improved overall scar assessment compared with buried interrupted subcuticular suturing alone when evaluated by blinded observers or the patients themselves. Our results do not support the use of adhesive strips as a means to improve cosmetic outcomes or reduce scar width. clinicaltrials.gov Identifier: NCT01979497.

Assessment of the Resistance of Several Suture Techniques in Human Cadaver Achilles Tendons.

PubMed

Manent, Andrea; Lopez, Laia; Vilanova, Joan; Mota, Tiago; Alvarez, Jordi; Santamaría, Alejandro; Oliva, Xavier Martí

Many treatments are available for acute Achilles tendon ruptures, conservative and surgical, with none superior to another. For surgical treatment, one can use various techniques. Recent studies have shown that double stitches are superior to simple sutures. Therefore, in the present study, we sought to determine the suture technique that is the most resistant to rupture. We performed an experimental anatomic study with 27 fresh-frozen human cadaveric Achilles tendons obtained through the body donation program of the University of Barcelona, testing the maximum strength. We simulated a rupture by performing resection in the middle portion of the tendon, 4 cm proximal to the calcaneus insertion. We then evaluated the double Kessler, double Bunnell, Krackow, and percutaneous Ma and Griffith technique. We used absorbable suture (polydioxanone no. 1) with all the techniques. Traction was performed using a machine that pulls the tendon at 10 to 100 N in 1000 repetitive cycles. Statistical analysis was performed using the χ 2 test and analysis of variance, with the 95% confidence intervals (p < .05). All repairs failed at the site of the suture knots, with none pulling out through the substance of the tendon. We found no significant differences among the different open suture techniques (p > .05). The Krackow suture presented with superior resistance, with a rupture rate 16.70% but with a mean elongation of 7.11 mm. The double Bunnell suture had the same rupture rate as the Krakow suture (16.70%) but with an inferior mean elongation of 4.53 mm. The Krackow and Bunnell suture were superior in endurance, strength of failure, and primary stability compared with the other suture types. However, the former presented with greater tendon elongation, although the difference was not statistically significant. Therefore, according to our findings and the published data, we recommend double Bunnell sutures for the surgical treatment of acute Achilles tendon rupture. Copyright © 2017 American College of Foot and Ankle Surgeons. Published by Elsevier Inc. All rights reserved.

A comparison of single-suture and double-suture incision closures in seaward-migrating juvenile Chinook salmon implanted with acoustic transmitters: implications for research in river basins containing hydropower structures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brown, Richard S.; Deters, Katherine A.; Cook, Katrina V.

Reductions in the size of acoustic transmitters implanted in migrating juvenile salmonids have resulted in the ability to make shorter incisions that may warrant using only a single suture for closure. However, it is not known if one suture will sufficiently hold the incision closed, particularly when outward pressure is placed on the surgical site such as when migrating fish experience pressure changes associated with passage at hydroelectric dams. The objective of this research was to evaluate the effectiveness of single-suture incision closures on juvenile Chinook salmon (Oncorhynchus tshawytscha). Juvenile Chinook salmon were surgically implanted with a 2012 Juvenile Salmonmore » Acoustic Telemetry System (JSATS) transmitter (0.30 g) and a passive integrated transponder tag (0.10 g) and incisions were closed with either one suture or two sutures. Mortality and tag retention were monitored and fish were examined after 7 and 14 days to evaluate tissue responses. In a separate experiment, surgically implanted fish were exposed to simulated turbine passage and then examined for expulsion of transmitters, expulsion of viscera through the incision, and mortal injury. With incisions closed using a single suture, there was no mortality or tag loss and similar or reduced tissue reaction compared to incisions closed with two sutures. Further, surgery time was significantly reduced when one suture was used, which leads to less handling and reduced stress. No tags were expelled during pressure scenarios and expulsion of viscera only occurred in two non-mortally injured fish (5%) with single sutures that were also exposed to very high pressure changes. No viscera expulsion was present in fish exposed to pressure scenarios likely representative of hydroturbine passage at many Columbia River dams (e.g. <2.7 ratio of pressure change; an acclimation pressure of 146.2 absolute kpa and a lowest exposure pressure of ~ 53.3 absolute kpa). Based on these results, we recommend the use of a single suture for surgical implantation of transmitters with incisions that are approximately 5 1/2 mm long after tag insertion.« less

Optimal Suturing Technique and Number of Sutures for Surgical Implantation of Acoustic Transmitters in Juvenile Salmonids

DOE Office of Scientific and Technical Information (OSTI.GOV)

Deters, Katherine A.; Brown, Richard S.; Boyd, James W.

2012-01-02

The size reduction of acoustic transmitters has led to a reduction in the length of incision needed to implant a transmitter. Smaller suture knot profiles and fewer sutures may be adequate for closing an incision used to surgically implant an acoustic microtransmitter. As a result, faster surgery times and reduced tissue trauma could lead to increased survival and decreased infection for implanted fish. The objective of this study was to assess the effects of five suturing techniques on mortality, tag and suture retention, incision openness, ulceration, and redness in juvenile Chinook salmon Oncorhynchus tshawytscha implanted with acoustic microtransmitters. Suturing wasmore » performed by three surgeons, and study fish were held at two water temperatures (12°C and 17°C). Mortality was low and tag retention was high for all treatments on all examination days (7, 14, 21, and 28 days post-surgery). Because there was surgeon variation in suture retention among treatments, further analyses included only the one surgeon who received feedback training in all suturing techniques. Incision openness and tissue redness did not differ among treatments. The only difference observed among treatments was in tissue ulceration. Incisions closed with a horizontal mattress pattern had more ulceration than other treatments among fish held for 28 days at 17°C. Results from this study suggest that one simple interrupted 1 × 1 × 1 × 1 suture is adequate for closing incisions on fish under most circumstances. However, in dynamic environments, two simple interrupted 1 × 1 × 1 × 1 sutures should provide adequate incision closure. Reducing bias in survival and behavior tagging studies is important when making comparisons to the migrating salmon population. Therefore, by minimizing the effects of tagging on juvenile salmon (reduced tissue trauma and reduced surgery time), researchers can more accurately estimate survival and behavior.« less

Diagnostic performance of skeletal maturity for the assessment of midpalatal suture maturation.

PubMed

Angelieri, Fernanda; Franchi, Lorenzo; Cevidanes, Lucia H S; McNamara, James A

2015-12-01

The aim of this study was to analyze the diagnostic performance of the cervical vertebral maturation (CVM) method in estimating accurately the stages of maturation of the midpalatal suture. Cone-beam computed tomography (CBCT) images from 142 subjects (84 female, 58 male; mean age, 14.8 ± 9.7 years) were analyzed by 2 calibrated examiners to define, by visual analysis, the maturational stages of the cervical vertebrae and the midpalatal suture. These CBCT images were required by orthodontists and surgeons for diagnosis and treatment purposes. Positive likelihood ratios (LHRs) were calculated to evaluate the diagnostic performance of the CVM stages in identifying the maturational stages of the midpalatal suture. Positive LHRs greater than 10 were found for several cervical vertebral stages (CSs), including CS1 and CS2 for the identification of midpalatal suture stages A and B, CS3 for the diagnosis of midpalatal suture stage C, and CS5 for the assessment of midpalatal suture stages D and E. These positive LHRs indicated large and often conclusive increases in the likelihood that the CVM stages were associated with specific stages of midpalatal suture maturation. At CS4, there were a moderate positive LHR for stage C and low positive LHRs for stages D and E. Most CVM stages can be used for the diagnosis of the stages of maturation of the midpalatal suture, so that CBCT imaging may not be necessary in these patients. In the postpubertal period, however, an assessment of the midpalatal suture maturation using CBCT images may be indicated in deciding between conventional rapid maxillary expansion and surgically assisted rapid maxillary expansion. On the other hand, if the CVM stage cannot be assessed, chronologic age may be a viable alternative to predict some midpalatal suture stages (particularly the early stages). Copyright © 2015 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Comparison of Suture-Based Anchors and Traditional Bioabsorbable Anchors in Foot and Ankle Surgery.

PubMed

Hembree, W Chad; Tsai, Michael A; Parks, Brent G; Miller, Stuart D

We compared the pullout strength of a suture-based anchor versus a bioabsorbable anchor in the distal fibula and calcaneus and evaluated the relationship between bone mineral density and peak load to failure. Eight paired cadaveric specimens underwent a modified Broström procedure and Achilles tendon reattachment. The fibula and calcaneus in the paired specimens received either a suture-based anchor or a bioabsorbable suture anchor. The fibular and calcaneal specimens were loaded to failure, defined as a substantial decrease in the applied load or pullout from the bone. In the fibula, the peak load to failure was significantly greater with the suture-based versus the bioabsorbable anchors (133.3 ± 41.8 N versus 76.8 ± 35.3 N; p = .002). No significant difference in load with 5 mm of displacement was found between the 2 groups. In the calcaneus, no difference in the peak load to failure was found between the 2 groups, and the peak load to failure with 5 mm of displacement was significantly lower with the suture-based than with the bioabsorbable anchors (52.2 ± 9.8 N versus 75.9 ± 12.4 N; p = .003). Bone mineral density and peak load to failure were significantly correlated in the fibula with the suture-based anchor. An innovative suture-based anchor had a greater peak load to failure compared with a bioabsorbable anchor in the fibula. In the calcaneus, the load at 5 mm of displacement was significantly lower in the suture-based than in the bioabsorbable group. The correlation findings might indicate the need for a cortical bone shelf with the suture-based anchor. Suture-based anchors could be a viable alternative to bioabsorbable anchors for certain foot and ankle procedures. Copyright © 2016 American College of Foot and Ankle Surgeons. Published by Elsevier Inc. All rights reserved.

Effects of suture material and ultrasonic transmitter size on survival, growth, wound healing, and tag expulsion in rainbow trout

USGS Publications Warehouse

Ivasauskas, Tomas J.; Bettoli, P.W.; Holt, T.

2012-01-01

We examined the effects of suture material (braided silk versus Monocryl) and relative ultrasonic transmitter size on healing, growth, mortality, and tag retention in rainbow trout Oncorhynchus mykiss. In experiment 1, 40 fish (205-281mmtotal length [TL], 106-264 g) were implanted with Sonotronics IBT-96-2 (23??7 mm; weight in air, 4.4 g; weight in water, 2.4 g) or IBT 96-2E (30 ?? 7 mm; weight in air, 4.9 g; weight in water, 2.4 g) ultrasonic telemetry tags. In experiment 2, 20 larger fish (342-405 mm TL; 520-844 g) were implanted with Sonotronics IBT-96-5 ultrasonic tags (36 ?? 11 mm; weight in air, 9.1 g; weight in water, 4.1 g). The tag burdens for all implanted fish ranged from 1.1% to 3.4%, and fish in both studies were held at 10-15??C. At the conclusion of both experiments (65 d after surgery), no mortalities were observed in any of the 60 tagged fish, most incisions were completely healed, and all fish in both experiments grew in length, although tagged fish grew more slowly than control fish in experiment 1. In both experiments, fish sutured with silk expelled tags more frequently than those sutured with Monocryl. Expulsion was observed in 45-50% of the fish sutured with silk and 0-25% of the fish sutured withMonocryl. Tag expulsion was not observed until 25-35 d after surgery. Fish sutured with silk exhibited a more severe inflammatory response 3 weeks after surgery than those sutured with Monocryl. In experiment 1, the rate of expulsion was linked to the severity of inflammation. Although braided silk sutures were applied faster than Moncryl sutures in both experiments, knots tied with either material were equally reliable and fish sutured with Monocryl experienced less inflammation and lower rates of tag expulsion. American Fisheries Society 2012.

Extending the southern range of four shrimps (Crustacea: Decapoda: Stenopodidae, Hippolytidae and Alpheidae) in southwestern Atlantic (27^o S) and confirming the presence of Mediterranean Stenopus spinosus Risso, 1827 in Brazil.

PubMed

Giraldes, Bruno Welter; Freire, Andrea Santarosa

2015-06-12

In subtidal zones, certain shrimp species with cryptic behaviour represent a gap in the biodiversity description in many places in the world. This study extends the southern limit of Stenopus hispidus (Oliver, 1811), Alpheus formosus Gibbes, 1850, Alpheus cf. packardii Kingsley, 1880 and Lysmata ankeri Rhyne & Lin, 2006 to Santa Catarina State-Brazil, 27^oS. The results also confirm the new occurrence of Stenopus spinosus Risso, 1827 in Brazilian waters. All specimens were collected by scuba diving from rocky islands between 3 and 25 meters depth. We present for each species certain taxonomic features in colour images that will help to identify these decapods in situ in further monitoring programs.

[Effectiveness comparison between modified percutaneous suture and conventional open suture in repairing acute closed achilles tendon rupture].

PubMed

Chu, Haikun; Xu, Yanbin; Chu, Haipeng; Xu, Yajun; Zhou, Fengji; Yu, Xin; Li, Hui; Ji, Xiaofeng

2012-06-01

To investigate the effectiveness of modified percutaneous suture in repairing acute closed Achilles tendon rupture by comparing with conventional open suture. Between January 2006 and October 2009, 50 patients with acute closed Achilles tendon rupture were treated with modified percutaneous suture by making 5 small incisions at both sides of Achilles tendon and zigzag suture (improved group, n=22) and with Kessler suture (conventional group, n=28), respectively. No significant difference was found in gender, age, time from injury to operation between 2 groups (P > 0.05). In improved group, the patients achieved healing of incisions by first intention after operation and no complication occurred; however, incision infection occurred in 1 case, Achilles tendon re-rupture in 1 case, and incision scar contracture in 2 cases in conventional group. The operation time of improved group [(38.7 +/- 6.6) minutes] was significantly shorter (t=-12.29, P=0.00) than that of conventional group [(52.3 +/- 6.9) minutes]; the blood loss of improved group [(4.9 +/- 2.0) mL] was significantly less (t=-25.20, P=0.00) than that of conventional group [(40.7 +/- 7.1) mL]. The patients were followed up 2-3 years (mean, 29.9 months). The American Orthopaedic Foot and Ankle Society (AOFAS) score was 99.6 +/- 1.0 in improved group and was 98.4 +/- 3.0 in conventional group, showing no significant difference between 2 groups (t=1.66, P=0.10). Comparison with conventional open suture, modified percutaneous suture has some advantages, such as easy operation, less complications, rapid recovery of limb function, and so on. Modified percutaneous suture is one of the best choices for the treatment of acute closed Achilles tendon rupture.

The role of thyroid eye disease and other factors in the overcorrection of hypotropia following unilateral adjustable suture recession of the inferior rectus (an American Ophthalmological Society thesis).

PubMed

Kerr, Natalie C

2011-12-01

Overcorrection of hypotropia subsequent to adjustable suture surgery following inferior rectus recession is undesirable, often resulting in persistent diplopia and reoperation. I hypothesized that overcorrection shift after suture adjustment may be unique to thyroid eye disease, and the use of a nonabsorbable suture may reduce the occurrence of overcorrection. A retrospective chart review of adult patients who had undergone eye muscle surgery with an adjustable suture technique was performed. Overcorrection shifts that occurred between the time of suture adjustment and 2 months postoperatively were examined. Descriptive statistics, linear regression, Anderson-Darling tests, generalized Pareto distributions, odds ratios, and Fisher tests were performed for two overcorrection shift thresholds (>2 and >5 prism diopters [PD]). Seventy-seven patients were found: 34 had thyroid eye disease and inferior rectus recession, 30 had no thyroid eye disease and inferior rectus recession, and 13 patients had thyroid eye disease and medial rectus recession. Eighteen cases exceeded the 2 PD threshold, and 12 exceeded the 5 PD threshold. Statistical analyses indicated that overcorrection was associated with thyroid eye disease (P=6.7E-06), inferior rectus surgery (P=6.7E-06), and absorbable sutures (>2 PD: OR=3.7, 95% CI=0.4-35.0, P=0.19; and >5 PD: OR=6.0, 95% CI=1.1-33.5, P=0.041). After unilateral muscle recession for hypotropia, overcorrection shifts are associated with thyroid eye disease, surgery of the inferior rectus, and use of absorbable sutures. Surgeons performing unilateral inferior rectus recession on adjustable suture in the setting of thyroid eye disease should consider using a nonabsorbable suture to reduce the incidence of postoperative overcorrection.

The Role of Thyroid Eye Disease and Other Factors in the Overcorrection of Hypotropia Following Unilateral Adjustable Suture Recession of the Inferior Rectus (An American Ophthalmological Society Thesis)

PubMed Central

Kerr, Natalie C.

2011-01-01

Purpose Overcorrection of hypotropia subsequent to adjustable suture surgery following inferior rectus recession is undesirable, often resulting in persistent diplopia and reoperation. I hypothesized that overcorrection shift after suture adjustment may be unique to thyroid eye disease, and the use of a nonabsorbable suture may reduce the occurrence of overcorrection. Methods A retrospective chart review of adult patients who had undergone eye muscle surgery with an adjustable suture technique was performed. Overcorrection shifts that occurred between the time of suture adjustment and 2 months postoperatively were examined. Descriptive statistics, linear regression, Anderson-Darling tests, generalized Pareto distributions, odds ratios, and Fisher tests were performed for two overcorrection shift thresholds (>2 and >5 prism diopters [PD]). Results Seventy-seven patients were found: 34 had thyroid eye disease and inferior rectus recession, 30 had no thyroid eye disease and inferior rectus recession, and 13 patients had thyroid eye disease and medial rectus recession. Eighteen cases exceeded the 2 PD threshold, and 12 exceeded the 5 PD threshold. Statistical analyses indicated that overcorrection was associated with thyroid eye disease (P=6.7E-06), inferior rectus surgery (P=6.7E-06), and absorbable sutures (>2 PD: OR=3.7, 95% CI=0.4–35.0, P=0.19; and >5 PD: OR=6.0, 95% CI=1.1–33.5, P=0.041). Conclusions After unilateral muscle recession for hypotropia, overcorrection shifts are associated with thyroid eye disease, surgery of the inferior rectus, and use of absorbable sutures. Surgeons performing unilateral inferior rectus recession on adjustable suture in the setting of thyroid eye disease should consider using a nonabsorbable suture to reduce the incidence of postoperative overcorrection. PMID:22253487

A near-infrared spectroscopy routine for unambiguous identification of cryptic ant species

USDA-ARS?s Scientific Manuscript database

The identification of species – of importance for most biological disciplines – is not always straightforward as cryptic species present a hurdle for traditional species discrimination. Fibre-optic near-infrared spectroscopy (NIRS) is a rapid and cheap method for a wide range of different applicatio...

Evaluation of a novel technique for wound closure using a barbed suture.

PubMed

Murtha, Amy P; Kaplan, Andrew L; Paglia, Michael J; Mills, Benjie B; Feldstein, Michael L; Ruff, Gregory L

2006-05-01

Suture knots present several disadvantages in wound closure, because they are tedious to tie and place ischemic demands on tissue. Bulky knots may be a nidus for infection, and they may extrude through skin weeks after surgery. Needle manipulations during knot-tying predispose the surgeon to glove perforation. A barbed suture was developed that is self-anchoring, requiring no knots or slack management for wound closure. The elimination of knot tying may have advantages over conventional wound closure methods. This prospective, randomized, controlled trial was designed to show that the use of barbed suture in dermal closure of the Pfannenstiel incision during nonemergent cesarean delivery surgery produces scar cosmesis at 5 weeks that is no worse than that observed with conventional closure using 3-0 polydioxanone suture. Cosmesis was assessed by review of postoperative photographs by a blinded, independent plastic surgeon using the modified Hollander cosmesis score. Secondary endpoints included infection, dehiscence, pain, closure time, and other adverse events. The study enrolled 195 patients, of whom 188 were eligible for analysis. Cosmesis scores did not significantly differ between the barbed suture group and the control group. Rates of infection, dehiscence, and other adverse events did not significantly differ between the two groups. Closure time and pain scores were comparable between the groups. The barbed suture represents an innovative option for wound closure. With a cosmesis and safety profile that is similar to that of conventional suture technique, it avoids the drawbacks inherent to suture knots.

Progressive Tightening of Pulley Sutures for Primary Repair of Large Scalp Wounds

PubMed Central

McLaughlin, Jillian M.; Ross, Lindy S.; Phillips, Linda G.; Wagner, Richard F.

2017-01-01

Summary: Scalp defects greater than 2 cm in diameter are not usually amenable to primary closure and require local tissue rearrangement, grafting, tissue expansion, or prolonged second intention healing. Scalp flap reconstruction is a significant undertaking that requires elevation of a total flap surface area that is 3–6 times the size of the defect, often involves profuse bleeding, and can be challenging to perform without conscious sedation or general anesthesia. Anticoagulated and medically complex patients pose additional challenges and limit options for treatment. The pulley suture uses the mechanical advantage of the pulley to distribute tension across a wound and is useful in areas of high tension such as scalp wounds. For scalp wounds greater than 2 cm, pulley sutures are placed along the length of the wound. An assistant exerts equal tension on the pulley sutures, and the surgeon sequentially ties the sutures. The sutures are tightened and retied weekly until complete scalp closure is achieved. The pulley sutures can be used for rapid primary closure of scalp wounds up to 2.5–3.0 cm in diameter under local anesthesia. For scalp wounds larger than 3 cm, we have also found that pulley sutures can be progressively tightened yielding additional tissue expansion every week. Scalp wounds greater than 3.0 cm can be easily closed via primary repair and weekly tightening of pulley sutures without the need for flap reconstruction, traditional tissue expander placement, or second intention healing. PMID:29632771

Bridge Suture for Successful McDonald Emergency Cerclage.

PubMed

Tanaka, Masaaki; Hori, Yoshiaki; Shirafuji, Aya; Kato, Mitsunori; Kato, Jyun; Kobayashi, Hiroto; Tsuchida, Toru; Fukae, Tsukasa

2017-01-01

To create awareness about a surgical technique termed bridge suture, which is performed as a pretreatment before a McDonald cerclage is performed on an emergency to treat severe cervical insufficiency. Procedures for bridge suture were reviewed in detail and outcomes of 16 patients treated with bridge suture followed by McDonald cerclage were evaluated retrospectively. Using the bridge suture, the edges of uterine cervix were temporarily sutured and the external uterine os was closed, while the hourglass-shaped fetal membranes were concomitantly confined within the cervix; subsequently, a McDonald cerclage was performed. Over a 22-year period, 16 patients with a dilated cervix and bulging fetal membranes were treated using the technique of bridge suture followed by an emergency cerclage. The mean gestational age at cerclage was 22.5 weeks; the mean gestational age at delivery was 30.7 weeks; and the mean interval between cerclage and delivery was 8.2 weeks. In 15 out of 16 cases, cerclage was performed without encountering any complications. No maternal complications, including cervical laceration, were observed. The mean body weight of 17 neonates, including that of a twin, was 1,516 g and of them, 15 neonates survived. The important outcome of bridge suture is the replacement of fetal membranes back into the uterine cavity before McDonald's cerclage is performed. Pretreatment with bridge suture may facilitate the performance of a successful emergency cerclage and contribute to good maternal and neonatal outcomes. © 2016 S. Karger AG, Basel.