On the Time Scale of Nocturnal Boundary Layer Cooling in Valleys and Basins and over Plains
NASA Astrophysics Data System (ADS)
de Wekker, Stephan F. J.; Whiteman, C. David
2006-06-01
Sequences of vertical temperature soundings over flat plains and in a variety of valleys and basins of different sizes and shapes were used to determine cooling-time-scale characteristics in the nocturnal stable boundary layer under clear, undisturbed weather conditions. An exponential function predicts the cumulative boundary layer cooling well. The fitting parameter or time constant in the exponential function characterizes the cooling of the valley atmosphere and is equal to the time required for the cumulative cooling to attain 63.2% of its total nighttime value. The exponential fit finds time constants varying between 3 and 8 h. Calculated time constants are smallest in basins, are largest over plains, and are intermediate in valleys. Time constants were also calculated from air temperature measurements made at various heights on the sidewalls of a small basin. The variation with height of the time constant exhibited a characteristic parabolic shape in which the smallest time constants occurred near the basin floor and on the upper sidewalls of the basin where cooling was governed by cold-air drainage and radiative heat loss, respectively.
Lin, Ying-Ju; Liao, Wen-Ling; Wang, Chung-Hsing; Tsai, Li-Ping; Tang, Chih-Hsin; Chen, Chien-Hsiun; Wu, Jer-Yuarn; Liang, Wen-Miin; Hsieh, Ai-Ru; Cheng, Chi-Fung; Chen, Jin-Hua; Chien, Wen-Kuei; Lin, Ting-Hsu; Wu, Chia-Ming; Liao, Chiu-Chu; Huang, Shao-Mei; Tsai, Fuu-Jen
2017-07-25
Human height can be described as a classical and inherited trait model. Genome-wide association studies (GWAS) have revealed susceptible loci and provided insights into the polygenic nature of human height. Familial short stature (FSS) represents a suitable trait for investigating short stature genetics because disease associations with short stature have been ruled out in this case. In addition, FSS is caused only by genetically inherited factors. In this study, we explored the correlations of FSS risk with the genetic loci associated with human height in previous GWAS, alone and cumulatively. We systematically evaluated 34 known human height single nucleotide polymorphisms (SNPs) in relation to FSS in the additive model (p < 0.00005). A cumulative effect was observed: the odds ratios gradually increased with increasing genetic risk score quartiles (p < 0.001; Cochran-Armitage trend test). Six affected genes-ZBTB38, ZNF638, LCORL, CABLES1, CDK10, and TSEN15-are located in the nucleus and have been implicated in embryonic, organismal, and tissue development. In conclusion, our study suggests that 13 human height GWAS-identified SNPs are associated with FSS risk both alone and cumulatively.
Forest regeneration composition and development in upland, mixed-oak forests.
Fei, Songlin; Gould, Peter J; Steiner, Kim C; Finley, James C; McDill, Marc E
2005-12-01
Advance regeneration in 52 mature mixed-oak stands was analyzed and described. Red maple (Acer rubrum L.) was the most abundant species in the study area. Among oak (Quercus) species, northern red oak (Q. rubra L.) was the most abundant within the Allegheny Plateau physiographic province, whereas chestnut oak (Q. montana L.) was the most abundant within the Ridge and Valley physiographic province. Sixteen stands, for which data are available through the fourth growing season following harvest, were used to describe stand development. Cumulative height, a composite measure of size and density, was used to describe early stand development. Black gum (Nyssa sylvatica Marsh.) and black birch (Betula lenta L.) had dramatic increases in stand density and cumulative height after overstory removal. Cumulative height of northern red oak and chestnut oak showed a faster positive response to overstory removal than red maple. Oak retained its dominance in cumulative height for at least 4 years after harvest. Red maple nevertheless remained the most abundant tree species after overstory removal. Our results suggest that the principal advantage of red maple regeneration is its ability to accumulate in large numbers prior to harvest.
Adult height, nutrition, and population health
Perkins, Jessica M.; Subramanian, S.V.; Davey Smith, George
2016-01-01
In this review, the potential causes and consequences of adult height, a measure of cumulative net nutrition, in modern populations are summarized. The mechanisms linking adult height and health are examined, with a focus on the role of potential confounders. Evidence across studies indicates that short adult height (reflecting growth retardation) in low- and middle-income countries is driven by environmental conditions, especially net nutrition during early years. Some of the associations of height with health and social outcomes potentially reflect the association between these environmental factors and such outcomes. These conditions are manifested in the substantial differences in adult height that exist between and within countries and over time. This review suggests that adult height is a useful marker of variation in cumulative net nutrition, biological deprivation, and standard of living between and within populations and should be routinely measured. Linkages between adult height and health, within and across generations, suggest that adult height may be a potential tool for monitoring health conditions and that programs focused on offspring outcomes may consider maternal height as a potentially important influence. PMID:26928678
Work-related symptoms and checkstand configuration: an experimental study.
Harber, P; Bloswick, D; Luo, J; Beck, J; Greer, D; Peña, L F
1993-07-01
Supermarket checkers are known to be at risk of upper-extremity cumulative trauma disorders. Forty-two experienced checkers checked a standard "market basket" of items on an experimental checkstand. The counter height could be adjusted (high = 35.5, low = 31.5 inches), and the pre-scan queuing area length (between conveyor belt and laser scanner) could be set to "near" or "far" lengths. Each subject scanned under the high-near, high-far, low-near, and low-far conditions in random order. Seven ordinal symptom scales were used to describe comfort. Analysis showed that both counter height and queuing length had significant effects on symptoms. Furthermore, the height of the subject affected the degree and direction of the impact of the checkstand configuration differences. The study suggests that optimization of design may be experimentally evaluated, that modification of postural as well as frequency loading may be beneficial, and that adjustability for the individual may be advisable.
NASA Astrophysics Data System (ADS)
Rowley, David
2017-04-01
On a spherical Earth, the mean elevation ( -2440m) would be everywhere at a mean Earth radius from the center. This directly links an elevation at the surface to physical dimensions of the Earth, including surface area and volume that are at most very slowly evolving components of the Earth system. Earth's mean elevation thus provides a framework within which to consider changes in heights of Earth's solid surface as a function of time. In this paper the focus will be on long-term, non-glacially controlled sea level. Long-term sea level has long been argued to be largely controlled by changes in ocean basin volume related to changes in area-age distribution of oceanic lithosphere. As generally modeled by Pitman (1978) and subsequent workers, the age-depth relationship of oceanic lithosphere, including both the ridge depth and coefficients describing the age-depth relationship are assumed constant. This paper examines the consequences of adhering to these assumptions when placed within the larger framework of maintaining a constant mean radius of the Earth. Self-consistent estimates of long-term sea level height and changes in mean depth of the oceanic crust are derived from the assumption that the mean elevation and corresponding mean radius are unchanging aspects of Earth's shorter-term evolution. Within this context, changes in mean depth of the oceanic crust, corresponding with changes in mean age of the oceanic lithosphere, acting over the area of the oceanic crust represent a volume change that is required to be balanced by a compensating equal but opposite volume change under the area of the continental crust. Models of paleo-cumulative hypsometry derived from a starting glacial isostatic adjustment (GIA)-corrected ice-free hypsometry that conserve mean elevation provide a basis for understanding how these compensating changes impact global hypsometry and particularly estimates of global mean shoreline height. Paleo-shoreline height and areal extent of flooding can be defined as the height and corresponding cumulative area of the solid surface of the Earth at which the integral of area as a function of elevation, from the maximum depth upwards, equals the volume of ocean water filling it with respect to cumulative paleo-hypsometry. Present height of the paleo-shoreline is the height on the GIA-corrected cumulative hypsometry at an area equal to the areal extent of flooding. Paleogeographic estimates of global extent of ocean flooding from the Middle Jurassic to end Eocene, when combined with conservation of mean elevation and ocean water volume allow an explicit estimate of the paleo-height and present height of the paleo-shoreline. The best-fitting estimate of present height of the paleo-shoreline, equivalent to a long-term "eustatic" sea level curve, implies very modest (25±22m) changes in long-term sea level above the ice-free sea level height of +40m. These, in turn, imply quite limited changes in mean depth of the oceanic crust (15±11m), and mean age of the oceanic lithosphere ( 62.1±2.4 my) since the Middle Jurassic.
NASA Astrophysics Data System (ADS)
Zheng, Wei; Hsu, Hou-Tse; Zhong, Min; Yun, Mei-Juan
2012-10-01
The accuracy of the Earth's gravitational field measured from the gravity field and steady-state ocean circulation explorer (GOCE), up to 250 degrees, influenced by the radial gravity gradient Vzz and three-dimensional gravity gradient Vij from the satellite gravity gradiometry (SGG) are contrastively demonstrated based on the analytical error model and numerical simulation, respectively. Firstly, the new analytical error model of the cumulative geoid height, influenced by the radial gravity gradient Vzz and three-dimensional gravity gradient Vij are established, respectively. In 250 degrees, the GOCE cumulative geoid height error measured by the radial gravity gradient Vzz is about 2½ times higher than that measured by the three-dimensional gravity gradient Vij. Secondly, the Earth's gravitational field from GOCE completely up to 250 degrees is recovered using the radial gravity gradient Vzz and three-dimensional gravity gradient Vij by numerical simulation, respectively. The study results show that when the measurement error of the gravity gradient is 3 × 10-12/s2, the cumulative geoid height errors using the radial gravity gradient Vzz and three-dimensional gravity gradient Vij are 12.319 cm and 9.295 cm at 250 degrees, respectively. The accuracy of the cumulative geoid height using the three-dimensional gravity gradient Vij is improved by 30%-40% on average compared with that using the radial gravity gradient Vzz in 250 degrees. Finally, by mutual verification of the analytical error model and numerical simulation, the orders of magnitude from the accuracies of the Earth's gravitational field recovery make no substantial differences based on the radial and three-dimensional gravity gradients, respectively. Therefore, it is feasible to develop in advance a radial cold-atom interferometric gradiometer with a measurement accuracy of 10-13/s2-10-15/s2 for precisely producing the next-generation GOCE Follow-On Earth gravity field model with a high spatial resolution.
Comparison of dust-layer heights from active and passive satellite sensors
NASA Astrophysics Data System (ADS)
Kylling, Arve; Vandenbussche, Sophie; Capelle, Virginie; Cuesta, Juan; Klüser, Lars; Lelli, Luca; Popp, Thomas; Stebel, Kerstin; Veefkind, Pepijn
2018-05-01
Aerosol-layer height is essential for understanding the impact of aerosols on the climate system. As part of the European Space Agency Aerosol_cci project, aerosol-layer height as derived from passive thermal and solar satellite sensors measurements have been compared with aerosol-layer heights estimated from CALIOP measurements. The Aerosol_cci project targeted dust-type aerosol for this study. This ensures relatively unambiguous aerosol identification by the CALIOP processing chain. Dust-layer height was estimated from thermal IASI measurements using four different algorithms (from BIRA-IASB, DLR, LMD, LISA) and from solar GOME-2 (KNMI) and SCIAMACHY (IUP) measurements. Due to differences in overpass time of the various satellites, a trajectory model was used to move the CALIOP-derived dust heights in space and time to the IASI, GOME-2 and SCIAMACHY dust height pixels. It is not possible to construct a unique dust-layer height from the CALIOP data. Thus two CALIOP-derived layer heights were used: the cumulative extinction height defined as the height where the CALIOP extinction column is half of the total extinction column, and the geometric mean height, which is defined as the geometrical mean of the top and bottom heights of the dust layer. In statistical average over all IASI data there is a general tendency to a positive bias of 0.5-0.8 km against CALIOP extinction-weighted height for three of the four algorithms assessed, while the fourth algorithm has almost no bias. When comparing geometric mean height there is a shift of -0.5 km for all algorithms (getting close to zero for the three algorithms and turning negative for the fourth). The standard deviation of all algorithms is quite similar and ranges between 1.0 and 1.3 km. When looking at different conditions (day, night, land, ocean), there is more detail in variabilities (e.g. all algorithms overestimate more at night than during the day). For the solar sensors it is found that on average SCIAMACHY data are lower by -1.097 km (-0.961 km) compared to the CALIOP geometric mean (cumulative extinction) height, and GOME-2 data are lower by -1.393 km (-0.818 km).
Examining boreal peatland vulnerability to wildfire: a cross-scale perspective (Invited)
NASA Astrophysics Data System (ADS)
Thompson, D. K.; Waddington, J. M.; Parisien, M.; Simpson, B. N.; Morris, P. J.; Kettridge, N.
2013-12-01
The contemporary state of peatlands in boreal western Canada is largely a reflection of the equilibrium between peat accumulation and a natural wildfire disturbance regime. However, additional disturbances of climate change and direct anthropogenic impacts are compounding natural wildfire disturbance, leading to the potential of more severe fire and in cases complete ecosystem shifts away from peatlands altogether. Here we present a cross-scale perspective on the vulnerability of peatlands to wildfire in the context of cumulative anthropogenic impacts. At the plot scale, laboratory burning and modelling has identified the exposure of high density humified peat at the surface as being more vulnerable to deep combustion compared to low-density features such as hummock microforms. At the stand scale, studies of tree impacts on moss light availability has identified critically high tree densities where combustion-resistant Sphagnum mosses are out-competed by drier and more flammable feathermosses. Widespread resource development has created seismic lines, cutlines, and associated linear disturbances at densities approaching 1.5 km km-2 in some areas. Our modelling of wind and solar radiation across varying linear disturbance widths and canopy heights reveals increased risk of wildfire ignition and spread at specific width-height ratios. Regionally, we show that streamflow observations can offer insight into drought and seasonal wildfire risk in peatland-dominated portions of the boreal plain. Integrated wildfire management in the boreal forest can benefit from the inclusion of these cross-scale processes and feedbacks we have identified when balancing the often competing interests of ecosystem integrity, economics, and community protection.
NASA Astrophysics Data System (ADS)
Mori, A.; Kumagai, H.
2016-12-01
It is crucial to analyze and interpret eruption tremors and explosion events for estimating eruption size and understanding eruption phenomena. Kumagai et al. (EPS, 2015) estimated the seismic source amplitudes (As) and cumulative source amplitudes (Is) for eruption tremors and explosion events at Tungurahua, Ecuador, by the amplitude source location (ASL) method based on the assumption of isotropic S-wave radiation in a high-frequency band (5-10 Hz). They found scaling relations between As and Is for eruption tremors and explosion events. However, the universality of these relations is yet to be verified, and the physical meanings of As and Is are not clear. In this study, we analyzed the relations between As and Is for eruption tremors and explosion events at active volcanoes in Japan, and estimated As and Is by the ASL method. We obtained power-law relations between As and Is, in which the powers were different between eruption tremors and explosion events. These relations were consistent with the scaling relations at Tungurahua volcano. Then, we compared As with maximum eruption plume heights (H) during eruption tremors analyzed in this study, and found that H was proportional to 0.21 power of As. This relation is similar to the plume height model based on the physical process of plume rise, which indicates that H is proportional to 0.25 power of volumetric flow rate for plinian eruptions. This suggests that As may correspond to volumetric flow rate. If we assume a seismic source with volume changes and far-field S-wave, As is proportional to the source volume rate. This proportional relation and the plume height model give rise to the relation that H is proportional to 0.25 power of As. These results suggest that we may be able to estimate plume heights in realtime by estimating As during eruptions from seismic observations.
Longitudinal lung function decline and wood dust exposure in the furniture industry.
Jacobsen, G; Schlünssen, V; Schaumburg, I; Taudorf, E; Sigsgaard, T
2008-02-01
The aim of the present study was to investigate the relationship between change in lung function and cumulative exposure to wood dust. In total, 1,112 woodworkers (927 males, 185 females) and 235 reference workers (104 males, 185 females) participated in a 6-yr longitudinal study. Forced expiratory volume in one second (FEV(1)), forced vital capacity (FVC), height and weight were measured, and questionnaire data on respiratory symptoms, wood dust exposure and smoking habits were collected. Cumulative inhalable wood dust exposure was assessed using a study-specific job exposure matrix and exposure time. The median (range) for cumulative wood dust exposure was 3.75 (0-7.55) mg x year x m(-3). A dose-response relationship between cumulative wood dust exposure and percent annual decrease in FEV(1) was suggested for female workers. This was confirmed in a linear regression model adjusted for confounders, including smoking, height and age. An additional difference of -14.50 mL x yr(-1) and -27.97 mL x yr(-1) was revealed for females exposed to 3.75-4.71 mg x yr x m(-3) or to >4.71 mg x yr x m(-3), respectively, compared with non-/low-exposed females. For females, a positive trend between wood dust exposure and the cumulative incidence proportion of FEV(1)/FVC <70% was suggested. In conclusion, in the present low-exposed cohort, female woodworkers had an accelerated decline in lung function, which may be clinically relevant.
Pulse height response of an optical particle counter to monodisperse aerosols
NASA Technical Reports Server (NTRS)
Wilmoth, R. G.; Grice, S. S.; Cuda, V.
1976-01-01
The pulse height response of a right angle scattering optical particle counter has been investigated using monodisperse aerosols of polystyrene latex spheres, di-octyl phthalate and methylene blue. The results confirm previous measurements for the variation of mean pulse height as a function of particle diameter and show good agreement with the relative response predicted by Mie scattering theory. Measured cumulative pulse height distributions were found to fit reasonably well to a log normal distribution with a minimum geometric standard deviation of about 1.4 for particle diameters greater than about 2 micrometers. The geometric standard deviation was found to increase significantly with decreasing particle diameter.
Indication of multiscaling in the volatility return intervals of stock markets
NASA Astrophysics Data System (ADS)
Wang, Fengzhong; Yamasaki, Kazuko; Havlin, Shlomo; Stanley, H. Eugene
2008-01-01
The distribution of the return intervals τ between price volatilities above a threshold height q for financial records has been approximated by a scaling behavior. To explore how accurate is the scaling and therefore understand the underlined nonlinear mechanism, we investigate intraday data sets of 500 stocks which consist of Standard & Poor’s 500 index. We show that the cumulative distribution of return intervals has systematic deviations from scaling. We support this finding by studying the m -th moment μm≡⟨(τ/⟨τ⟩)m⟩1/m , which show a certain trend with the mean interval ⟨τ⟩ . We generate surrogate records using the Schreiber method, and find that their cumulative distributions almost collapse to a single curve and moments are almost constant for most ranges of ⟨τ⟩ . Those substantial differences suggest that nonlinear correlations in the original volatility sequence account for the deviations from a single scaling law. We also find that the original and surrogate records exhibit slight tendencies for short and long ⟨τ⟩ , due to the discreteness and finite size effects of the records, respectively. To avoid as possible those effects for testing the multiscaling behavior, we investigate the moments in the range 10<⟨τ⟩≤100 , and find that the exponent α from the power law fitting μm˜⟨τ⟩α has a narrow distribution around α≠0 which depends on m for the 500 stocks. The distribution of α for the surrogate records are very narrow and centered around α=0 . This suggests that the return interval distribution exhibits multiscaling behavior due to the nonlinear correlations in the original volatility.
James D. Haywood
1994-01-01
A loblolly pine stand was subjected to two cultural treatments to determine treatment effects in the 9th through 12th growing seasons. Thining resulted in less spring height growth in the 9th and 10th growing seasons than no thinning, but thinning resulted in more diameter growth each year. Fertilization increased height and diameter growth beginning in the 10th...
Volcanic eruption volume flux estimations from very long period infrasound signals
NASA Astrophysics Data System (ADS)
Yamada, Taishi; Aoyama, Hiroshi; Nishimura, Takeshi; Iguchi, Masato; Hendrasto, Muhamad
2017-01-01
We examine very long period infrasonic signals accompanying volcanic eruptions near active vents at Lokon-Empung volcano in Indonesia, Aso, Kuchinoerabujima, and Kirishima volcanoes in Japan. The excitation of the very long period pulse is associated with an explosion, the emerging of an eruption column, and a pyroclastic density current. We model the excitation of the infrasound pulse, assuming a monopole source, to quantify the volume flux and cumulative volume of erupting material. The infrasound-derived volume flux and cumulative volume can be less than half of the video-derived results. A largely positive correlation can be seen between the infrasound-derived volume flux and the maximum eruption column height. Therefore, our result suggests that the analysis of very long period volcanic infrasound pulses can be helpful in estimating the maximum eruption column height.
NASA Astrophysics Data System (ADS)
Paz-Ferreiro, J.; Bertol, I.; Vidal Vázquez, E.
2008-07-01
Changes in soil surface microrelief with cumulative rainfall under different tillage systems and crop cover conditions were investigated in southern Brazil. Surface cover was none (fallow) or the crop succession maize followed by oats. Tillage treatments were: 1) conventional tillage on bare soil (BS), 2) conventional tillage (CT), 3) minimum tillage (MT) and 4) no tillage (NT) under maize and oats. Measurements were taken with a manual relief meter on small rectangular grids of 0.234 and 0.156 m2, throughout growing season of maize and oats, respectively. Each data set consisted of 200 point height readings, the size of the smallest cells being 3×5 cm during maize and 2×5 cm during oats growth periods. Random Roughness (RR), Limiting Difference (LD), Limiting Slope (LS) and two fractal parameters, fractal dimension (D) and crossover length (l) were estimated from the measured microtopographic data sets. Indices describing the vertical component of soil roughness such as RR, LD and l generally decreased with cumulative rain in the BS treatment, left fallow, and in the CT and MT treatments under maize and oats canopy. However, these indices were not substantially affected by cumulative rain in the NT treatment, whose surface was protected with previous crop residues. Roughness decay from initial values was larger in the BS treatment than in CT and MT treatments. Moreover, roughness decay generally tended to be faster under maize than under oats. The RR and LD indices decreased quadratically, while the l index decreased exponentially in the tilled, BS, CT and MT treatments. Crossover length was sensitive to differences in soil roughness conditions allowing a description of microrelief decay due to rainfall in the tilled treatments, although better correlations between cumulative rainfall and the most commonly used indices RR and LD were obtained. At the studied scale, parameters l and D have been found to be useful in interpreting the configuration properties of the soil surface microrelief.
Cumulative dose 60Co gamma irradiation effects on AlGaN/GaN Schottky diodes and its area dependence
NASA Astrophysics Data System (ADS)
Sharma, Chandan; Laishram, Robert; Rawal, Dipendra Singh; Vinayak, Seema; Singh, Rajendra
2018-04-01
Cumulative dose gamma radiation effects on current-voltage characteristics of GaN Schottky diodes have been investigated. The different area diodes have been fabricated on AlGaN/GaN high electron mobility transistor (HEMT) epi-layer structure grown over SiC substrate and irradiated with a dose up to the order of 104 Gray (Gy). Post irradiation characterization shows a shift in the turn-on voltage and improvement in reverse leakage current. Other calculated parameters include Schottky barrier height, ideality factor and reverse saturation current. Schottky barrier height has been decreased whereas reverse saturation current shows an increase in the value post irradiation with improvement in the ideality factor. Transfer length measurement (TLM) characterization shows an improvement in the contact resistance. Finally, diodes with larger area have more variation in the calculated parameters due to the induced local heating effect.
NASA Astrophysics Data System (ADS)
Pendergrass, W.; Vogel, C. A.
2013-12-01
As an outcome of discussions between Duke Energy Generation and NOAA/ARL following the 2009 AMS Summer Community Meeting, in Norman Oklahoma, ARL and Duke Energy Generation (Duke) signed a Cooperative Research and Development Agreement (CRADA) which allows NOAA to conduct atmospheric boundary layer (ABL) research using Duke renewable energy sites as research testbeds. One aspect of this research has been the evaluation of forecast hub-height winds from three NOAA atmospheric models. Forecasts of 10m (surface) and 80m (hub-height) wind speeds from (1) NOAA/GSD's High Resolution Rapid Refresh (HRRR) model, (2) NOAA/NCEP's 12 km North America Model (NAM12) and (3) NOAA/NCEP's 4k high resolution North America Model (NAM4) were evaluated against 18 months of surface-layer wind observations collected at the joint NOAA/Duke Energy research station located at Duke Energy's West Texas Ocotillo wind farm over the period April 2011 through October 2012. HRRR, NAM12 and NAM4 10m wind speed forecasts were compared with 10m level wind speed observations measured on the NOAA/ATDD flux-tower. Hub-height (80m) HRRR , NAM12 and NAM4 forecast wind speeds were evaluated against the 80m operational PMM27-28 meteorological tower supporting the Ocotillo wind farm. For each HRRR update, eight forecast hours (hour 01, 02, 03, 05, 07, 10, 12, 15) plus the initialization hour (hour 00), evaluated. For the NAM12 and NAM4 models forecast hours 00-24 from the 06z initialization were evaluated. Performance measures or skill score based on absolute error 50% cumulative probability were calculated for each forecast hour. HRRR forecast hour 01 provided the best skill score with an absolute wind speed error within 0.8 m/s of observed 10m wind speed and 1.25 m/s for hub-height wind speed at the designated 50% cumulative probability. For both NAM4 and NAM12 models, skill scores were diurnal with comparable best scores observed during the day of 0.7 m/s of observed 10m wind speed and 1.1 m/s for hub-height wind speed at the designated 50% cumulative probability level.
Isojima, Tsuyoshi; Hasegawa, Tomonobu; Yokoya, Susumu; Tanaka, Toshiaki
2017-09-30
Growth hormone (GH) treatment for children with GH deficiency (GHD) is effective in improving adult height. To achieve favorable effects, GH treatment before puberty is very important, because prepubertal height gain is highly correlated with total height gain. However, no report has studied the effects by analyzing a nationwide data from recent GHD patients in Japan. We investigated the response to GH treatment using data compiled in the Foundation for Growth Science in Japan, and compared the effects between the 1990s and 2000s using analysis of covariance. We analyzed 534 prepubertal GHD subjects treated in the 2000s with three consecutive years of data from the start and investigated predictive factors for the effects. The cumulative height standard deviation score (SDS) change over three years of GH treatment was 0.91 ± 0.57 and 1.20 ± 0.62 in the 1990s and 2000s, respectively. Subjects in the 2000s were divided into three groups by severity, and the cumulative height SDS was 1.60 ± 0.93, 1.20 ± 0.54, and 1.00 ± 0.40 indicating severe, moderate, and mild GHD, respectively. Age and height SDS at the start and severity were identified as independent predictive factors. We also found a significant difference in the effects between the two cohorts after adjusting for the different factors (regression coefficient: -0.069, 95% confidence interval: -0.11 to -0.030, p = 0.0006), which might be due to the GH dose effect. We conclude that the effects of GH treatment in the 2000s had improved compared with those in the 1990s.
Milani, Mirco; Toscano, Attilio
2013-01-01
This article reports the results of evapotranspiration (ET) experiments carried out in Southern Italy (Sicily) in a pilot-scale constructed wetland (CW) made of a combination of vegetated (Phragmites australis) and unvegetated sub-surface flow beds. Domestic wastewater from a conventional wastewater treatment plant was used to fill the beds. Microclimate data was gathered from an automatic weather station close to the experimental plant. From June to November 2009 and from April to November 2010, ET values were measured as the amount of water needed to restore the initial volume in the beds after a certain period. Cumulative reference evapotranspiration (ET(0)) was similar to the cumulative ET measured in the beds without vegetation (ET(con)), while the Phragmites ET (ET (phr) ) was significantly higher underlining the effect of the vegetation. The plant coefficient of P. australis (K(p)) was very high (up to 8.5 in August 2009) compared to the typical K(c) for agricultural crops suggesting that the wetland environment was subjected to strong "clothesline" and "oasis" effects. According to the FAO 56 approach, K(p) shows different patterns and values in relation to growth stages correlating significantly to stem density, plant height and total leaves. The mean Water Use Efficiency (WUE) value of P. australis was quite low, about 2.27 g L(-1), probably due to the unlimited water availability and the lack of the plant's physiological adaptations to water conservation. The results provide useful and valid information for estimating ET rates in small-scale constructed wetlands since ET is a relevant issue in arid and semiarid regions. In these areas CW feasibility for wastewater treatment and reuse should also be carefully evaluated for macrophytes in relation to their WUE values.
Lee H. MacDonald; Drew Coe; Sandra Litschert
2004-01-01
Cumulative effects result from the combined impact of multiple activities over space and time. Land and aquatic resource managers are particularly concerned with cumulative watershed effects (CWEs). CWEs can encompass a broad range of concerns, but primary issues are changes in runoff, water quality, channel morphology, and aquatic ecosystems at the watershed scale (...
NASA Technical Reports Server (NTRS)
Alexander, W. M.; Goad, S.; Mcdonald, R. A.; Tanner, W. G., Jr.; Pollock, J. J.
1989-01-01
The Dust Impact Detection System (DIDSY) aboard the Giotto spacecraft provided the information on the dust flux, mass spectrum, and cumulative mass distribution flux in the coma of Comet Halley. Analysis of discrete pulse height data of cometary particles for the mass range of particles between 4.0 x 10 to the -10th g and 6.0 x 10 to the -6th g registered by the Giotto DIDSY detectors 2, 3, and 4 has been completed, and a cumulative flux has been determined for this size range of particles. Inside the cometopause, anomalous peaks have been identified as deviation from a 1/R-squared curve in both pre- and postencounter measurements.
Lopes, Letícia Helena Caldas; Sdepanian, Vera Lucia; Szejnfeld, Vera Lúcia; de Morais, Mauro Batista; Fagundes-Neto, Ulysses
2008-10-01
To evaluate bone mineral density of the lumbar spine in children and adolescents with inflammatory bowel disease, and to identify the clinical risk factors associated with low bone mineral density. Bone mineral density of the lumbar spine was evaluated using dual-energy X-ray absorptiometry (DXA) in 40 patients with inflammatory bowel disease. Patients were 11.8 (SD = 4.1) years old and most of them were male (52.5%). Multiple linear regression analysis was performed to identify potential associations between bone mineral density Z-score and age, height-for-age Z-score, BMI Z-score, cumulative corticosteroid dose in milligrams and in milligrams per kilogram, disease duration, number of relapses, and calcium intake according to the dietary reference intake. Low bone mineral density (Z-score bellow -2) was observed in 25% of patients. Patients with Crohn's disease and ulcerative colitis had equivalent prevalence of low bone mineral density. Multiple linear regression models demonstrated that height-for-age Z-score, BMI Z-score, and cumulative corticosteroid dose in mg had independent effects on BMD, respectively, beta = 0.492 (P = 0.000), beta = 0.460 (P = 0.001), beta = - 0.014 (P = 0.000), and these effects remained significant after adjustments for disease duration, respectively, beta = 0.489 (P = 0.013), beta = 0.467 (P = 0.001), and beta = - 0.005 (P = 0.015). The model accounted for 54.6% of the variability of the BMD Z-score (adjusted R2 = 0.546). The prevalence of low bone mineral density in children and adolescents with inflammatory bowel disease is considerably high and independent risk factors associated with bone mineral density are corticosteroid cumulative dose in milligrams, height-for-age Z-score, and BMI Z-score.
Hansen, Åse M; Andersen, Lars L; Mendes de Leon, Carlos F; Bruunsgaard, Helle; Lund, Rikke
2016-08-01
The mechanisms underlying the social gradient in physical functioning are not fully understood. Cumulative physiological stress may be a pathway. The present study aimed to investigate the association between highest attained school education and physical performance in late midlife, and to determine to what extent cumulative physiological stress mediated these associations. The study is based on data from the Copenhagen Aging and Midlife Biobank (CAMB; n=5467 participants, aged 48-62 years, 31.5% women). School education was measured as highest examination passed in primary or secondary school (3 categories). Cumulative stress was operationalised as allostatic load (AL), and measured as the number of biological parameters (out of 14) in which participants scored in the poorest quartile. Physical performance included dynamic muscle performance (chair rise ability, postural balance, sagittal flexibility) and muscle strength (jump height, trunk extension and flexion, and handgrip strength). Among women, higher school education was associated with better performance in all physical performance tests. Among men, higher school education was associated with better performance only in chair rise and jump height. AL partially mediated the association between school education and physical performance, and accounted only for 2-30% of the total effect among women. Similar results were observed among men for chair rise and jump height. These results might indicate that AL plays a minor role in the association between school education and late midlife dynamic muscle performance in both men and women, and in muscle strength among women. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/
Dan Neary; Brenda R. Baillie
2016-01-01
Herbicide use varies both spatially and temporally within managed forests. While information exists on the effects of herbicide use on water quality at the site and small catchment scale, little is known about the cumulative effects of herbicide use at the landscape scale. A cumulative effects analysis was conducted in the upper Rangitaiki catchment (118,345...
An effective measure of childhood adversity that is valid with older adults.
Danielson, Ramona; Sanders, Gregory F
2018-06-12
Childhood adversity (CA) has life-long effects that we are just beginning to understand. The Midlife in the United States (MIDUS) data is a rich resource that could contribute to the knowledge of the impact of CA in the later years but, while a number of CA items are included in MIDUS, a cumulative CA scale based on those items has not been created. Development of a CA scale would create numerous research opportunities within MIDUS and overcome some of the challenges of using a secondary dataset. The present study aimed to demonstrate that a cumulative measure of CA that is valid with older adults could be created using retrospective MIDUS Refresher study data (Ryff et al., 2016); analysis included data collected from 2011 to 2014 from 2542 adults ages 23-76 (1017 adults 55-76). The present study provided a rationale for which measures of CA to include in a cumulative scale. The distribution of eight types of CA and the cumulative CA scale were consistent with findings from past studies of CA. The factor structure of the cumulative CA scale was similar to the original ACE study and included two factors: household dynamics and child abuse/neglect. Consistent with past studies, the CA scale predicted a negative association with life satisfaction and a positive association with number of chronic conditions. This study demonstrated that an effective cumulative measure of CA could be created that would be of value to other studies using MIDUS data to explore outcomes with older adults. Copyright © 2018 Elsevier Ltd. All rights reserved.
Water infiltration in prewetted porous media: dynamic capillary pressure and Green-Ampt modeling
NASA Astrophysics Data System (ADS)
Hsu, S.; Hilpert, M.
2013-12-01
Recently, an experimental study has shown that the modified Green-Ampt (GA) model, which accounts for a velocity-dependent capillary pressure, can describe water infiltration in dry sand columns better than the classical GA model. Studies have also shown that the initial water content of prewetted porous media affects the dynamic capillary pressure during infiltration. In this study, we performed a series of downward water infiltration experiments in prewetted sand columns for four different initial water contents: 0%, 3.3%, 6.5%, and 13.8%. We also used three different ponding heights: 10 cm, 20 cm, and 40 cm. As expected, an increase in ponding height resulted in a monotonic increase in cumulative infiltration. However, we found anomalous behavior, in that the cumulative infiltration did not monotonically decrease as the initial water content increased. When modeling the experiments with the modified GA approach, we linked this anomalous behavior to the reduction factor in the model for dynamic capillary pressure that is a function of initial water content.
NASA Astrophysics Data System (ADS)
Burchsted, Denise; Daniels, Melinda D.
2014-01-01
Of the many types of barriers to water flow, beaver dams are among the smallest, typically lasting less than a decade and rarely exceeding 1.5 m in height. They are also among the most frequent and common obstructions in rivers, with a density often exceeding ten dams per km, a frequency of construction within a given network on a time scale of years, and a historic extent covering most of North America. Past quantification of the geomorphologic impact of beaver dams has primarily been limited to local impacts within individual impoundments and is of limited geographic scope. To assess the impact of beaver dams at larger scales, this study examines channel shape and sediment distribution in thirty river reaches in northeastern Connecticut, U.S.A. The study reaches fall within the broader categories of impounded and free-flowing segments, leaving a third segment class of beaver meadows requiring additional study. Each of the study reaches were classified at the reach scale as free-flowing, valley-wide beaver pond, in-channel beaver pond, and downstream of beaver dam. The bankfull channel width to depth ratios and channel widths normalized by watershed area vary significantly across the study reach classes. Additionally, reaches modified by beaver dams have finer sediment distributions. This paper provides the first quantitative geomorphic descriptions of the in-channel beaver pond and reaches downstream of beaver dams. Given the different channel shapes and sediment distributions, we infer that geomorphic processes are longitudinally decoupled by these frequent barriers that control local base level. These barriers generate heterogeneity within a river network by greatly increasing the range of channel morphology and by generating patches controlled by different processes. Therefore, in spite of the small size of individual beaver dams, the cumulative effect of multiple dams has the potential to modify processes at larger spatial scales. To improve assessment of the larger-scale impacts, we propose a hierarchical classification scheme based on discontinuities, place the reach classes of this study within that scheme, and suggest that further research should continue investigation of discontinuity at the network scale and quantification of the cumulative impacts.
Giangrande, Scott E.; Toto, Tami; Jensen, Michael P.; ...
2016-11-15
A radar wind profiler data set collected during the 2 year Department of Energy Atmospheric Radiation Measurement Observations and Modeling of the Green Ocean Amazon (GoAmazon2014/5) campaign is used to estimate convective cloud vertical velocity, area fraction, and mass flux profiles. Vertical velocity observations are presented using cumulative frequency histograms and weighted mean profiles to provide insights in a manner suitable for global climate model scale comparisons (spatial domains from 20 km to 60 km). Convective profile sensitivity to changes in environmental conditions and seasonal regime controls is also considered. Aggregate and ensemble average vertical velocity, convective area fraction, andmore » mass flux profiles, as well as magnitudes and relative profile behaviors, are found consistent with previous studies. Updrafts and downdrafts increase in magnitude with height to midlevels (6 to 10 km), with updraft area also increasing with height. Updraft mass flux profiles similarly increase with height, showing a peak in magnitude near 8 km. Downdrafts are observed to be most frequent below the freezing level, with downdraft area monotonically decreasing with height. Updraft and downdraft profile behaviors are further stratified according to environmental controls. These results indicate stronger vertical velocity profile behaviors under higher convective available potential energy and lower low-level moisture conditions. Sharp contrasts in convective area fraction and mass flux profiles are most pronounced when retrievals are segregated according to Amazonian wet and dry season conditions. During this deployment, wet season regimes favored higher domain mass flux profiles, attributed to more frequent convection that offsets weaker average convective cell vertical velocities.« less
Influence of voice focus on tongue movement in speech.
Bressmann, Tim; de Boer, Gillian; Marino, Viviane Cristina de Castro; Fabron, Eliana Maria Gradim; Berti, Larissa Cristina
2017-01-01
The present study evaluated global aspects of lingual movement during sentence production with backward and forward voice focus. Nine female participants read a sentence with a variety of consonants in a normal condition and with backward and forward voice focus. Midsagittal tongue movement was recorded with ultrasound. Tongue height over time at an anterior, a central, and a posterior measurement angle was measured. The outcome measures were speech rate, cumulative distance travelled, and average movement speed of the tongue. There were no differences in speech rate between the different conditions. The cumulative distance travelled by the tongue and the average speed indicated that the posterior tongue travelled a smaller cumulative distance and at a slower speed in the forward focus condition. The central tongue moved a larger cumulative distance and at a higher speed in the backward focus condition. The study offers first insights on how tongue movement is affected by different voice focus settings and illustrates the plasticity of tongue movement in speech.
Hyperscaling breakdown and Ising spin glasses: The Binder cumulant
NASA Astrophysics Data System (ADS)
Lundow, P. H.; Campbell, I. A.
2018-02-01
Among the Renormalization Group Theory scaling rules relating critical exponents, there are hyperscaling rules involving the dimension of the system. It is well known that in Ising models hyperscaling breaks down above the upper critical dimension. It was shown by Schwartz (1991) that the standard Josephson hyperscaling rule can also break down in Ising systems with quenched random interactions. A related Renormalization Group Theory hyperscaling rule links the critical exponents for the normalized Binder cumulant and the correlation length in the thermodynamic limit. An appropriate scaling approach for analyzing measurements from criticality to infinite temperature is first outlined. Numerical data on the scaling of the normalized correlation length and the normalized Binder cumulant are shown for the canonical Ising ferromagnet model in dimension three where hyperscaling holds, for the Ising ferromagnet in dimension five (so above the upper critical dimension) where hyperscaling breaks down, and then for Ising spin glass models in dimension three where the quenched interactions are random. For the Ising spin glasses there is a breakdown of the normalized Binder cumulant hyperscaling relation in the thermodynamic limit regime, with a return to size independent Binder cumulant values in the finite-size scaling regime around the critical region.
Hauff, Nancy J; Fry-McComish, Judith; Chiodo, Lisa M
2017-08-01
To describe relationships between cumulative trauma, partner conflict and post-traumatic stress in African-American postpartum women. Cumulative trauma exposure estimates for women in the USA range from 51-69%. During pregnancy, most trauma research has focused on physical injury to the mother. Post-traumatic stress disorder (PTSD) is associated with trauma and more prevalent in African-American women than women of other groups. Knowledge about both the rate and impact of cumulative trauma on pregnancy may contribute to our understanding of women seeking prenatal care, and disparities in infant morbidity and mortality. This retrospective, correlational, cross-sectional study took place on postpartum units of two Detroit hospitals. Participants were 150 African-American women aged between 18-45 who had given birth. Mothers completed the Cumulative Trauma Scale, Conflict Tactics Scale, Clinician Administered Post-traumatic Stress Scale, Edinburgh Postnatal Depression Scale and a Demographic Data form. Descriptive statistics, correlations and multiple regressions were used for data analysis. All participants reported at least one traumatic event in their lifetime. Cumulative trauma and partner conflict predicted PTSD, with the trauma of a life-threatening event for a loved one reported by 60% of the sample. Nearly, one-fourth of the women screened were at risk for PTSD. Increased cumulative trauma, increased partner conflict and lower level of education were related to higher rates of PTSD symptoms. Both cumulative trauma and partner conflict in the past year predict PTSD. Reasoning was used most often for partner conflict resolution. The results of this study offer additional knowledge regarding relationships between cumulative trauma, partner conflict and PTSD in African-American women. Healthcare providers need to be sensitive to patient life-threatening events, personal failures, abuse and other types of trauma. Current evidence supports the need to assess for post-traumatic stress symptoms during pregnancy. © 2016 John Wiley & Sons Ltd.
NASA Astrophysics Data System (ADS)
Krause, Marita; Irwin, Judith; Wiegert, Theresa; Miskolczi, Arpad; Damas-Segovia, Ancor; Beck, Rainer; Li, Jiang-Tao; Heald, George; Müller, Peter; Stein, Yelena; Rand, Richard J.; Heesen, Volker; Walterbos, Rene A. M.; Dettmar, Ralf-Jürgen; Vargas, Carlos J.; English, Jayanne; Murphy, Eric J.
2018-03-01
Aim. The vertical halo scale height is a crucial parameter to understand the transport of cosmic-ray electrons (CRE) and their energy loss mechanisms in spiral galaxies. Until now, the radio scale height could only be determined for a few edge-on galaxies because of missing sensitivity at high resolution. Methods: We developed a sophisticated method for the scale height determination of edge-on galaxies. With this we determined the scale heights and radial scale lengths for a sample of 13 galaxies from the CHANG-ES radio continuum survey in two frequency bands. Results: The sample average values for the radio scale heights of the halo are 1.1 ± 0.3 kpc in C-band and 1.4 ± 0.7 kpc in L-band. From the frequency dependence analysis of the halo scale heights we found that the wind velocities (estimated using the adiabatic loss time) are above the escape velocity. We found that the halo scale heights increase linearly with the radio diameters. In order to exclude the diameter dependence, we defined a normalized scale height h˜ which is quite similar for all sample galaxies at both frequency bands and does not depend on the star formation rate or the magnetic field strength. However, h˜ shows a tight anticorrelation with the mass surface density. Conclusions: The sample galaxies with smaller scale lengths are more spherical in the radio emission, while those with larger scale lengths are flatter. The radio scale height depends mainly on the radio diameter of the galaxy. The sample galaxies are consistent with an escape-dominated radio halo with convective cosmic ray propagation, indicating that galactic winds are a widespread phenomenon in spiral galaxies. While a higher star formation rate or star formation surface density does not lead to a higher wind velocity, we found for the first time observational evidence of a gravitational deceleration of CRE outflow, e.g. a lowering of the wind velocity from the galactic disk.
Status of the Topside Vary-Chap Ionospheric Model
NASA Astrophysics Data System (ADS)
Reinisch, Bodo; Nsumei, Patrick; Huang, Xueqin; Bilitza, Dieter
Status of the Topside Vary-Chap Ionospheric Model The general alpha-Chapman function for a multi-constituent gas which includes a continuously varying scale height and was therefore dubbed the Vary-Chap function, can present the topside electron density profiles in analytical form. The Vary-Chap profile is defined by the scale height function H(h) and the height and density of the F2 layer peak. By expressing 80,000 ISIS-2 measured topside density profiles as Vary-Chap functions we derived 80,000 scale height functions, which form the basis for the topside density profile modeling. The normalized scale height profiles Hn = H(h)/Hm were grouped according to season, MLAT, and MLT for each 50 km height bin from 200 km to 1400 km, and the median, lower, and upper quartiles for each bin were calculated. Hm is the scale height at the F2 layer peak. The resulting Hn functions are modeled in terms of hyperbolic tangent functions using 5 parameters that are determined by multivariate least squares, including the transition height hT where the scale height gradient has a maximum. These normalized scale height functions, representing the model of the topside electron density profiles from hmF2 to 1,400 km altitude, are independent of hmF2 and NmF2 and can therefore be directly used for the topside Ne profile in IRI. Similarly, this model can extend measured bottomside profiles to the topside, replacing the simple alpha-Chapman function with constant scale height that is currently used for construction of the topside profile in the Digisondes / ARTIST of the Global Ionospheric Radio Observatory (GIRO). It turns out that Hm(top) calculated from the topside profiles is generally several times larger than Hm(bot) derived from the bottomside profiles. This follows necessarily from the difference in the definition of the scale height functions for the topside and bottomside profiles. The diurnal variations of the ratio Hm(top) / Hm(bot) has been determined for different latitudes which makes it now possible to specify the topside profile for any given bottomside profile.
Heymsfield, Steven B; Chirachariyavej, Thamrong; Rhyu, Im Joo; Roongpisuthipong, Chulaporn; Heo, Moonseong; Pietrobelli, Angelo
2009-01-01
Adult resting energy expenditure (REE) scales as height( approximately 1.5), whereas body weight (BW) scales as height( approximately 2). Mass-specific REE (i.e., REE/BW) is thus lower in tall subjects compared with their shorter counterparts, the mechanism of which is unknown. We evaluated the hypothesis that high-metabolic-rate brain mass scales to height with a power significantly less than that of BW, a theory that if valid would provide a potential mechanism for height-related REE effects. The hypothesis was tested by measuring brain mass on a large (n = 372) postmortem sample of Thai men. Since brain mass-body size relations may be influenced by age, the hypothesis was secondarily explored in Thai men age < or =45 yr (n = 299) and with brain magnetic resonance imaging (MRI) studies in Korean men (n = 30) age > or =20<30 yr. The scaling of large body compartments was examined in a third group of Asian men living in New York (NY, n = 28) with MRI and dual-energy X-ray absorptiometry. Brain mass scaled to height with a power (mean +/- SEE; 0.46 +/- 0.13) significantly smaller (P < 0.001) than that of BW scaled to height (2.36 +/- 0.19) in the whole group of Thai men; brain mass/BW scaled negatively to height (-1.94 +/- 0.20, P < 0.001). Similar results were observed in younger Thai men, and results for brain mass/BW vs. height were directionally the same (P = 0.09) in Korean men. Skeletal muscle and bone scaled to height with powers similar to that of BW (i.e., approximately 2-3) in the NY Asian men. Models developed using REE estimates in Thai men suggest that brain accounts for most of the REE/BW height dependency. Tall and short men thus differ in relative brain mass, but the proportions of BW as large compartments appear independent of height, observations that provide a potential mechanistic basis for related differences in REE and that have implications for the study of adult energy requirements.
New figuring model based on surface slope profile for grazing-incidence reflective optics
Zhou, Lin; Huang, Lei; Bouet, Nathalie; ...
2016-08-09
Surface slope profile is widely used in the metrology of grazing-incidence reflective optics instead of surface height profile. Nevertheless, the theoretical and experimental model currently used in deterministic optical figuring processes is based on surface height, not on surface slope. This means that the raw slope profile data from metrology need to be converted to height profile to perform the current height-based figuring processes. The inevitable measurement noise in the raw slope data will introduce significant cumulative error in the resultant height profiles. As a consequence, this conversion will degrade the determinism of the figuring processes, and will have anmore » impact on the ultimate surface figuring results. To overcome this problem, an innovative figuring model is proposed, which directly uses the raw slope profile data instead of the usual height data as input for the deterministic process. In this article, first the influence of the measurement noise on the resultant height profile is analyzed, and then a new model is presented; finally a demonstration experiment is carried out using a one-dimensional ion beam figuring process to demonstrate the validity of our approach.« less
Spencer, N; Logan, S
2002-01-01
Parental height is frequently treated as a biological variable in studies of birth weight and childhood growth. Elimination of social variables from multivariate models including parental height as a biological variable leads researchers to conclude that social factors have no independent effect on the outcome. This paper challenges the treatment of parental height as a biological variable, drawing on extensive evidence for the determination of adult height through a complex interaction of genetic and social factors. The paper firstly seeks to establish the importance of social factors in the determination of height. The methodological problems associated with treatment of parental height as a purely biological variable are then discussed, illustrated by data from published studies and by analysis of data from the 1958 National Childhood Development Study (NCDS). The paper concludes that a framework for studying pathways to pregnancy and childhood outcomes needs to take account of the complexity of the relation between genetic and social factors and be able to account for the effects of multiple risk factors acting cumulatively across time and across generations. Illustrations of these approaches are given using NCDS data. PMID:12193422
Wind Power Electricity: The Bigger the Turbine, The Greener the Electricity?
2012-01-01
Wind energy is a fast-growing and promising renewable energy source. The investment costs of wind turbines have decreased over the years, making wind energy economically competitive to conventionally produced electricity. Size scaling in the form of a power law, experience curves and progress rates are used to estimate the cost development of ever-larger turbines. In life cycle assessment, scaling and progress rates are seldom applied to estimate the environmental impacts of wind energy. This study quantifies whether the trend toward larger turbines affects the environmental profile of the generated electricity. Previously published life cycle inventories were combined with an engineering-based scaling approach as well as European wind power statistics. The results showed that the larger the turbine is, the greener the electricity becomes. This effect was caused by pure size effects of the turbine (micro level) as well as learning and experience with the technology over time (macro level). The environmental progress rate was 86%, indicating that for every cumulative production doubling, the global warming potential per kWh was reduced by 14%. The parameters, hub height and rotor diameter were identified as Environmental Key Performance Indicators that can be used to estimate the environmental impacts for a generic turbine. PMID:22475003
Wind power electricity: the bigger the turbine, the greener the electricity?
Caduff, Marloes; Huijbregts, Mark A J; Althaus, Hans-Joerg; Koehler, Annette; Hellweg, Stefanie
2012-05-01
Wind energy is a fast-growing and promising renewable energy source. The investment costs of wind turbines have decreased over the years, making wind energy economically competitive to conventionally produced electricity. Size scaling in the form of a power law, experience curves and progress rates are used to estimate the cost development of ever-larger turbines. In life cycle assessment, scaling and progress rates are seldom applied to estimate the environmental impacts of wind energy. This study quantifies whether the trend toward larger turbines affects the environmental profile of the generated electricity. Previously published life cycle inventories were combined with an engineering-based scaling approach as well as European wind power statistics. The results showed that the larger the turbine is, the greener the electricity becomes. This effect was caused by pure size effects of the turbine (micro level) as well as learning and experience with the technology over time (macro level). The environmental progress rate was 86%, indicating that for every cumulative production doubling, the global warming potential per kWh was reduced by 14%. The parameters, hub height and rotor diameter were identified as Environmental Key Performance Indicators that can be used to estimate the environmental impacts for a generic turbine. © 2012 American Chemical Society
Quantification of soil water retention parameters using multi-section TDR-waveform analysis
NASA Astrophysics Data System (ADS)
Baviskar, S. M.; Heimovaara, T. J.
2017-06-01
Soil water retention parameters are important for describing flow in variably saturated soils. TDR is one of the standard methods used for determining water content in soil samples. In this study, we present an approach to estimate water retention parameters of a sample which is initially saturated and subjected to an incremental decrease in boundary head causing it to drain in a multi-step fashion. TDR waveforms are measured along the height of the sample at assumed different hydrostatic conditions at daily interval. The cumulative discharge outflow drained from the sample is also recorded. The saturated water content is obtained using volumetric analysis after the final step involved in multi-step drainage. The equation obtained by coupling the unsaturated parametric function and the apparent dielectric permittivity is fitted to a TDR wave propagation forward model. The unsaturated parametric function is used to spatially interpolate the water contents along TDR probe. The cumulative discharge outflow data is fitted with cumulative discharge estimated using the unsaturated parametric function. The weight of water inside the sample estimated at the first and final boundary head in multi-step drainage is fitted with the corresponding weights calculated using unsaturated parametric function. A Bayesian optimization scheme is used to obtain optimized water retention parameters for these different objective functions. This approach can be used for samples with long heights and is especially suitable for characterizing sands with a uniform particle size distribution at low capillary heads.
Growth Pattern in Paediatric Crohn Disease Is Related to Inflammatory Status.
Ley, Delphine; Duhamel, Alain; Behal, Hélène; Vasseur, Francis; Sarter, Hélène; Michaud, Laurent; Gower-Rousseau, Corinne; Turck, Dominique
2016-12-01
The respective role of disease activity and steroid therapy in growth impairment in paediatric-onset Crohn disease (CD) is still debated. Our aim was to investigate whether the growth pattern of children with CD was correlated with the inflammatory status during the disease course, regardless the cumulative duration of steroid therapy. One hundred and seven patients with a diagnosis of CD <17 years, followed during ≥2 years and for whom ≥2 height measures were available during follow-up, were identified between 1998 and 2010. Height, C-reactive protein (CRP), orosomucoid, and steroid therapy duration were collected at each visit. The relationship between the evolution of growth velocity and inflammatory status during follow-up was investigated using a linear mixed model with random coefficients. Median age at diagnosis was 11.7 years (Q1-Q3: 9.8-13.5). Mean height for age (H/A) z score was 0.14 ± 1.29 at diagnosis and 0.05 ± 1.23 among the 75 patients who had reached their final height at maximal follow-up (median: 4.9 years; Q1-Q3: 3.8-6.4). Growth failure (H/A z score <-2) was present in 7 (8%) patients at diagnosis and 5 (5%) at maximal follow-up. Growth velocity was negatively correlated with the evolution of CRP (P < 0.0001) and orosomucoid (P < 0.0001) during follow-up. After adjustment for the cumulative duration of steroid therapy, these 2 correlations remained significant (CRP: P = 0.0008; orosomucoid: P < 0.0001). Children with CD with uncontrolled inflammatory status have a lower growth velocity. The inflammatory status should be kept as close to normal as possible in paediatric-onset patients with CD to optimize their growth pattern.
Hamilton, Kristen R.; Sinha, Rajita; Potenza, Marc N.
2014-01-01
Stress has been associated with poor self-control. Individual differences in impulsivity and other behavioral tendencies may influence the relationship of stress with self-control, although this possibility has not been examined to date. The present research investigated whether cumulative stress is associated with poor self-control, and whether this relationship is mediated by impulsivity, behavioral approach, and behavioral inhibition in men and women. A community sample of 566 adults (319 women and 247 men) was assessed on the Cumulative Adversity Interview, Brief Self-control Scale, Barratt Impulsivity Scale, and Behavioral Activation System and Behavioral Inhibition System Scale (BIS/BAS). Data were analyzed using regression and bootstrapping techniques. In the total sample, the effects of cumulative stress on self-control were mediated by impulsivity. Neither behavioral inhibition nor behavioral approach mediated the association between cumulative stress and self-control in the total sample. Results were similar when men and women were considered separately, with impulsivity, but not behavioral inhibition or approach, mediating the association between cumulative stress and self-control. Impulsive individuals might benefit preferentially from interventions focusing on stress management and strategies for improving self-control. PMID:24508183
Hamilton, Kristen R; Sinha, Rajita; Potenza, Marc N
2014-11-01
Stress has been associated with poor self-control. Individual differences in impulsivity and other behavioral tendencies may influence the relationship of stress with self-control, although this possibility has not been examined to date. The present research investigated whether cumulative stress is associated with poor self-control, and whether this relationship is mediated by impulsivity, behavioral approach, and behavioral inhibition in men and women. A community sample of 566 adults (319 women and 247 men) was assessed on the Cumulative Adversity Interview, Brief Self-control Scale, Barratt Impulsivity Scale, and Behavioral Activation System and Behavioral Inhibition System Scale (BIS/BAS). Data were analyzed using regression and bootstrapping techniques. In the total sample, the effects of cumulative stress on self-control were mediated by impulsivity. Neither behavioral inhibition nor behavioral approach mediated the association between cumulative stress and self-control in the total sample. Results were similar when men and women were considered separately, with impulsivity, but not behavioral inhibition or approach, mediating the association between cumulative stress and self-control. Impulsive individuals might benefit preferentially from interventions focusing on stress management and strategies for improving self-control. Copyright © 2014 Elsevier Ltd. All rights reserved.
Scaling of human body composition to stature: new insights into body mass index.
Heymsfield, Steven B; Gallagher, Dympna; Mayer, Laurel; Beetsch, Joel; Pietrobelli, Angelo
2007-07-01
Although Quetelet first reported in 1835 that adult weight scales to the square of stature, limited or no information is available on how anatomical body compartments, including adipose tissue (AT), scale to height. We examined the critical underlying assumptions of adiposity-body mass index (BMI) relations and extended these analyses to major anatomical compartments: skeletal muscle (SM), bone, residual mass, weight (AT+SM+bone), AT-free mass, and organs (liver, brain). This was a cross-sectional analysis of 2 body-composition databases: one including magnetic resonance imaging and dual-energy X-ray absorptiometry (DXA) estimates of evaluated components in adults (total n=411; organs=76) and the other a larger DXA database (n=1346) that included related estimates of fat, fat-free mass, and bone mineral mass. Weight, primary lean components (SM, residual mass, AT-free mass, and fat-free mass), and liver scaled to height with powers of approximately 2 (all P<0.001); bone and bone mineral mass scaled to height with powers >2 (2.31-2.48), and the fraction of weight as bone mineral mass was significantly (P<0.001) correlated with height in women. AT scaled weakly to height with powers of approximately 2, and adiposity was independent of height. Brain mass scaled to height with a power of 0.83 (P=0.04) in men and nonsignificantly in women; the fraction of weight as brain was inversely related to height in women (P=0.002). These observations suggest that short and tall subjects with equivalent BMIs have similar but not identical body composition, provide new insights into earlier BMI-related observations and thus establish a foundation for height-normalized indexes, and create an analytic framework for future studies.
Scaling of human body composition to stature: new insights into body mass index 123
Heymsfield, Steven B; Gallagher, Dympna; Mayer, Laurel; Beetsch, Joel; Pietrobelli, Angelo
2009-01-01
Background Although Quetelet first reported in 1835 that adult weight scales to the square of stature, limited or no information is available on how anatomical body compartments, including adipose tissue (AT), scale to height. Objective We examined the critical underlying assumptions of adiposity–body mass index (BMI) relations and extended these analyses to major anatomical compartments: skeletal muscle (SM), bone, residual mass, weight (AT+SM+bone), AT-free mass, and organs (liver, brain). Design This was a cross-sectional analysis of 2 body-composition databases: one including magnetic resonance imaging and dual-energy X-ray absorptiometry (DXA) estimates of evaluated components in adults (total n = 411; organs = 76) and the other a larger DXA database (n = 1346) that included related estimates of fat, fat-free mass, and bone mineral mass. Results Weight, primary lean components (SM, residual mass, AT-free mass, and fat-free mass), and liver scaled to height with powers of ≈2 (all P < 0.001); bone and bone mineral mass scaled to height with powers > 2 (2.31–2.48), and the fraction of weight as bone mineral mass was significantly (P < 0.001) correlated with height in women. AT scaled weakly to height with powers of ≈2, and adiposity was independent of height. Brain mass scaled to height with a power of 0.83 (P = 0.04) in men and nonsignificantly in women; the fraction of weight as brain was inversely related to height in women (P = 0.002). Conclusions These observations suggest that short and tall subjects with equivalent BMIs have similar but not identical body composition, provide new insights into earlier BMI-related observations and thus establish a foundation for height-normalized indexes, and create an analytic framework for future studies. PMID:17616766
NASA Astrophysics Data System (ADS)
Ma, Xin-Xin; Lin, Zhan; Jin, Hong-Lin; Chen, Hua-Ran; Jiao, Li-Guo
2017-11-01
In this study, the distribution characteristics of scale height at various solar activity levels were statistically analyzed using the Constellation Observing System for Meteorology, Ionosphere, and Climate (COSMIC) radio occultation data for 2007-2013. The results show that: (1) in the mid-high latitude region, the daytime (06-17LT) scale height exhibits annual variations in the form of a single peak structure with the crest appearing in summer. At the high latitude region, an annual variation is also observed for nighttime (18-05LT) scale height; (2) changes in the spatial distribution of the scale height occur. The crests are deflected towards the north during daytime (12-14LT) at a geomagnetic longitude of 60°W-180°W, and they are distributed roughly along the geomagnetic equator at 60°W-180°E. In the approximate region of 120°W-150°E and 50°S-80°S, the scale height values are significantly higher than those in other mid-latitude areas. This region enlarges with increased solar activity, and shows an approximately symmetric distribution about 0° geomagnetic longitude. Nighttime (00-02LT) scale height values in the high-latitude region are larger than those in the low-mid latitude region. These results could serve as reference for the study of ionosphere distribution and construction of the corresponding profile model.
Kim, Hyungjin; Choi, Seung Hong; Kim, Ji-Hoon; Ryoo, Inseon; Kim, Soo Chin; Yeom, Jeong A.; Shin, Hwaseon; Jung, Seung Chai; Lee, A. Leum; Yun, Tae Jin; Park, Chul-Kee; Sohn, Chul-Ho; Park, Sung-Hye
2013-01-01
Background Glioma grading assumes significant importance in that low- and high-grade gliomas display different prognoses and are treated with dissimilar therapeutic strategies. The objective of our study was to retrospectively assess the usefulness of a cumulative normalized cerebral blood volume (nCBV) histogram for glioma grading based on 3 T MRI. Methods From February 2010 to April 2012, 63 patients with astrocytic tumors underwent 3 T MRI with dynamic susceptibility contrast perfusion-weighted imaging. Regions of interest containing the entire tumor volume were drawn on every section of the co-registered relative CBV (rCBV) maps and T2-weighted images. The percentile values from the cumulative nCBV histograms and the other histogram parameters were correlated with tumor grades. Cochran’s Q test and the McNemar test were used to compare the diagnostic accuracies of the histogram parameters after the receiver operating characteristic curve analysis. Using the parameter offering the highest diagnostic accuracy, a validation process was performed with an independent test set of nine patients. Results The 99th percentile of the cumulative nCBV histogram (nCBV C99), mean and peak height differed significantly between low- and high-grade gliomas (P = <0.001, 0.014 and <0.001, respectively) and between grade III and IV gliomas (P = <0.001, 0.001 and <0.001, respectively). The diagnostic accuracy of nCBV C99 was significantly higher than that of the mean nCBV (P = 0.016) in distinguishing high- from low-grade gliomas and was comparable to that of the peak height (P = 1.000). Validation using the two cutoff values of nCBV C99 achieved a diagnostic accuracy of 66.7% (6/9) for the separation of all three glioma grades. Conclusion Cumulative histogram analysis of nCBV using 3 T MRI can be a useful method for preoperative glioma grading. The nCBV C99 value is helpful in distinguishing high- from low-grade gliomas and grade IV from III gliomas. PMID:23704910
Ionospheric scale height from the refraction of satellite signals.
NASA Technical Reports Server (NTRS)
Heron, M. L.; Titheridge, J. E.
1972-01-01
Accurate observations of the elevation angle of arrival of 20 MHz signals from the polar orbiting satellite Beacon-B for a 20 month period have provided transmission ionograms which may be reduced to give Hp the scale height at the peak of the ionosphere. Noon seasonal averages of Hp are 1.35 (in winter) to 1.55 (in summer) times greater than the scale height obtained from bottom-side ionograms. A comparison of scale height at the peak with routine measurements of total content and peak electron density indicates that the O+/H+ transition level is above 1000 km during the day but comes down to about 630 km on winter nights. A predawn peak in the overall scale height is caused by a lowering of the layer to a region of increased recombination and is magnified in winter by low O+/H+ transition levels.
Buretic-Tomljanovic, Alena; Giacometti, Jasminka; Ostojic, Sasa; Kapovic, Miljenko
2007-01-01
Craniometric variation in humans reflects different genetic and environmental influences. Long-term climatic adaptation is less likely to show an impact on size and shape variation in a small local area than at the global level. The aim of this work was to assess the contribution of the particular environmental factors to body height and craniofacial variability in a small geographic area of Croatia. A total of 632 subjects, aged 18-21, participated in the survey. Body height, head length, head breadth, head height, head circumference, cephalic index, morphological face height, face breadth, and facial index were analysed regarding geographic, climatic and dietary conditions in different regions of the country, and correlated with the specific climatic variables (cumulative multiyear sunshine duration, cumulative multiyear average precipitation, multiyear average air temperatures) and calcium concentrations in drinking water. Significant differences between groups classified according to geographic, climatic or dietary affiliation, and the impact of the environmental predictors on the variation in the investigated traits were assessed using multiple forward stepwise regression analyses. Higher body height measures in both sexes were significantly correlated with Mediterranean diet type. Mediterranean diet type also contributed to higher head length and head circumference measures in females. Cephalic index values correlated to geographic regions in both sexes, showing an increase from southern to eastern Croatia. In the same direction, head length significantly decreased in males and head breadth increased in females. Mediterranean climate was associated with higher and narrower faces in females. The analysis of the particular climatic variables did not reveal a significant influence on body height in either sex. Concurrently, climatic features influenced all craniofacial traits in females and only head length and facial index in males. Mediterranean climate, characterized by higher average sunshine duration, higher average precipitation and higher average air temperatures, was associated with longer, higher and narrower skulls, higher head circumference, lower cephalic index, and higher and narrower faces (lower facial index). Calcium concentrations in drinking water did not correlate significantly with any dependent variable. A significant effect of environmental factors on body height and craniofacial variability was found in Croatian young adult population. This effect was more pronounced in females, revealing sex-specific craniofacial differentiation. However, the impact of environment was low and may explain only 1.0-7.32% variation of the investigated traits.
Wahida, Kihal-Talantikite; Padilla, Cindy M.; Denis, Zmirou-Navier; Olivier, Blanchard; Géraldine, Le Nir; Philippe, Quenel; Séverine, Deguen
2016-01-01
Many epidemiological studies examining long-term health effects of exposure to air pollutants have characterized exposure by the outdoor air concentrations at sites that may be distant to subjects’ residences at different points in time. The temporal and spatial mobility of subjects and the spatial scale of exposure assessment could thus lead to misclassification in the cumulative exposure estimation. This paper attempts to fill the gap regarding cumulative exposure assessment to air pollution at a fine spatial scale in epidemiological studies investigating long-term health effects. We propose a conceptual framework showing how major difficulties in cumulative long-term exposure assessment could be surmounted. We then illustrate this conceptual model on the case of exposure to NO2 following two steps: (i) retrospective reconstitution of NO2 concentrations at a fine spatial scale; and (ii) a novel approach to assigning the time-relevant exposure estimates at the census block level, using all available data on residential mobility throughout a 10- to 20-year period prior to that for which the health events are to be detected. Our conceptual framework is both flexible and convenient for the needs of different epidemiological study designs. PMID:26999170
Wahida, Kihal-Talantikite; Padilla, Cindy M; Denis, Zmirou-Navier; Olivier, Blanchard; Géraldine, Le Nir; Philippe, Quenel; Séverine, Deguen
2016-03-15
Many epidemiological studies examining long-term health effects of exposure to air pollutants have characterized exposure by the outdoor air concentrations at sites that may be distant to subjects' residences at different points in time. The temporal and spatial mobility of subjects and the spatial scale of exposure assessment could thus lead to misclassification in the cumulative exposure estimation. This paper attempts to fill the gap regarding cumulative exposure assessment to air pollution at a fine spatial scale in epidemiological studies investigating long-term health effects. We propose a conceptual framework showing how major difficulties in cumulative long-term exposure assessment could be surmounted. We then illustrate this conceptual model on the case of exposure to NO₂ following two steps: (i) retrospective reconstitution of NO₂ concentrations at a fine spatial scale; and (ii) a novel approach to assigning the time-relevant exposure estimates at the census block level, using all available data on residential mobility throughout a 10- to 20-year period prior to that for which the health events are to be detected. Our conceptual framework is both flexible and convenient for the needs of different epidemiological study designs.
Abravanel, Benjamin T; Sinha, Rajita
2015-02-01
Repeated exposure to stressful events across the lifespan, referred to as cumulative adversity, is a potent risk factor for depression. Research indicates that cumulative adversity detrimentally affects emotion regulation processes, which may represent a pathway linking cumulative adversity to vulnerability to depression. However, empirical evidence that emotion dysregulation mediates the relationship between cumulative adversity and depression is limited, particularly in adult populations. We examined the direct and indirect effects of cumulative adversity on depressive symptomatology in a large community sample of adults (n = 745) who were further characterized by risk status: never-depressed (n = 638) and "at-risk" remitted mood-disordered (n = 107). All participants completed the Cumulative Adversity Inventory (CAI), the Difficulties in Emotion Regulation Scale (DERS), and the Center for Epidemiologic Studies Depression Scale (CES-D). Bootstrapped confidence intervals were computed to estimate the indirect effect of emotion dysregulation on the relationship between cumulative adversity and depressive symptomatology and to test whether this indirect effect was moderated by risk status. Emotion dysregulation partially and significantly mediated the relationship between cumulative adversity and depressive symptomatology independent of risk status. Overall, cumulative adversity and emotion dysregulation accounted for 50% of the variance in depressive symptomatology. These findings support the hypothesis that disruption of adaptive emotion regulation processes associated with repeated exposure to stressful life events represents an intrapersonal mechanism linking the experience of adverse events to depression. Our results support the utility of interventions that simultaneously emphasize stress reduction and emotion regulation to treat and prevent depressive vulnerability and pathology. Copyright © 2014 Elsevier Ltd. All rights reserved.
Abravanel, Benjamin T.; Sinha, Rajita
2014-01-01
Repeated exposure to stressful events across the lifespan, referred to as cumulative adversity, is a potent risk factor for depression. Research indicates that cumulative adversity detrimentally affects emotion regulation processes, which may represent a pathway linking cumulative adversity to vulnerability to depression. However, empirical evidence that emotion dysregulation mediates the relationship between cumulative adversity and depression is limited, particularly in adult populations. We examined the direct and indirect effects of cumulative adversity on depressive symptomatology in a large community sample of adults (n = 745) who were further characterized by risk status: never-depressed (n = 638) and “at-risk” remitted mood-disordered (n = 107). All participants completed the Cumulative Adversity Inventory (CAI), the Difficulties in Emotion Regulation Scale (DERS), and the Center for Epidemiologic Studies Depression Scale (CES-D). Bootstrapped confidence intervals were computed to estimate the indirect effect of emotion dysregulation on the relationship between cumulative adversity and depressive symptomatology and to test whether this indirect effect was moderated by risk status. Emotion dysregulation partially and significantly mediated the relationship between cumulative adversity and depressive symptomatology independent of risk status. Overall, cumulative adversity and emotion dysregulation accounted for 50% of the variance in depressive symptomatology. These findings support the hypothesis that disruption of adaptive emotion regulation processes associated with repeated exposure to stressful life events represents an intrapersonal mechanism linking the experience of adverse events to depression. Our results support the utility of interventions that simultaneously emphasize stress reduction and emotion regulation to treat and prevent depressive vulnerability and pathology. PMID:25528603
Compaction of Chromite Cumulates applying a Centrifuging Piston-Cylinder
NASA Astrophysics Data System (ADS)
Manoochehri, S.; Schmidt, M. W.
2012-12-01
Stratiform accumulations of chromite cumulates, such as the UG2 chromitite layer in the Bushveld Complex, is a common feature in most of the large layered mafic intrusions. The time scales and mechanics of gravitationally driven crystal settling and compaction and the feasibility of these processes for the formation of such cumulate layers is investigated through a series of high temperature (1280-1300 °C) centrifuge-assisted experiments at 100-2000 g, 0.4-0.6 GPa. A mixture of natural chromite, with defined grain sizes (means of 5 μm, 13 μm, and 52 μm), and a melt with a composition thought to represent the parental magma of the Bushveld Complex, was first chemically and texturally equilibrated at static conditions and then centrifuged. Centrifugation leads to a single cumulate layer formed at the gravitational bottom of the capsule. This layer was analysed for porosity, mean grain size, size distribution and also travelling distance of chromite crystals. The experimentally observed mechanical settling velocity of chromite grains in a suspension with ~ 24 vol% crystals is calculated to be about half (~ 0.53) of the Stokes settling velocity, consistent with a sedimentation exponent n of 2.35±0.3. The settling leads to a porosity of about 52 % in the chromite layer. Formation times of chromite orthocumulates with initial crystal content in the melt of 1 % and grain sizes of 2 mm are thus around 0.6 m/day. To achieve more compacted chromite piles, centrifugation times and acceleration were increased. Within each experiment the crystal content of the cumulate layer increases downward almost linearly at least in the lower 2/3 of the cumulate pile. Although porosity in the lowermost segment of the chromite layer decreases with increasing effective stress integrated over time, the absolute decrease is smaller than for experiments with olivine (from a previous study). Formation times of a ½ meter single chromite layer with 70 vol% chromite, is calculated to be around 20 years whereas this value is around 0.4 years for olivine cumulates. When considering a natural outcrop of a layered intrusion with multiple layers of about 50 meters height, adcumulate formation time decreases to a few months. With increasing the effective stress integrated over time, applied during centrifugation, crystal size distribution histograms move slightly toward larger grain sizes, but looking at mean grain sizes, a narrow range of changes can be observed. Classic crystal size distribution profiles corrected for real 3D sizes (CSDCorrectin program) of the chromite grains in different experiments illustrate a collection of parallel log-linear trends at larger grain sizes with a very slight overturn at small grain sizes. This is in close agreement with the idealized CSD plots of adcumulus growth.
Mesoscopic Length Scale Controls the Rheology of Dense Suspensions
NASA Astrophysics Data System (ADS)
Bonnoit, Claire; Lanuza, Jose; Lindner, Anke; Clement, Eric
2010-09-01
From the flow properties of dense granular suspensions on an inclined plane, we identify a mesoscopic length scale strongly increasing with volume fraction. When the flowing layer height is larger than this length scale, a diverging Newtonian viscosity is determined. However, when the flowing layer height drops below this scale, we evidence a nonlocal effective viscosity, decreasing as a power law of the flow height. We establish a scaling relation between this mesoscopic length scale and the suspension viscosity. These results support recent theoretical and numerical results implying collective and clustered granular motion when the jamming point is approached from below.
Mesoscopic length scale controls the rheology of dense suspensions.
Bonnoit, Claire; Lanuza, Jose; Lindner, Anke; Clement, Eric
2010-09-03
From the flow properties of dense granular suspensions on an inclined plane, we identify a mesoscopic length scale strongly increasing with volume fraction. When the flowing layer height is larger than this length scale, a diverging Newtonian viscosity is determined. However, when the flowing layer height drops below this scale, we evidence a nonlocal effective viscosity, decreasing as a power law of the flow height. We establish a scaling relation between this mesoscopic length scale and the suspension viscosity. These results support recent theoretical and numerical results implying collective and clustered granular motion when the jamming point is approached from below.
Additive scales in degenerative disease--calculation of effect sizes and clinical judgment.
Riepe, Matthias W; Wilkinson, David; Förstl, Hans; Brieden, Andreas
2011-12-16
The therapeutic efficacy of an intervention is often assessed in clinical trials by scales measuring multiple diverse activities that are added to produce a cumulative global score. Medical communities and health care systems subsequently use these data to calculate pooled effect sizes to compare treatments. This is done because major doubt has been cast over the clinical relevance of statistically significant findings relying on p values with the potential to report chance findings. Hence in an aim to overcome this pooling the results of clinical studies into a meta-analyses with a statistical calculus has been assumed to be a more definitive way of deciding of efficacy. We simulate the therapeutic effects as measured with additive scales in patient cohorts with different disease severity and assess the limitations of an effect size calculation of additive scales which are proven mathematically. We demonstrate that the major problem, which cannot be overcome by current numerical methods, is the complex nature and neurobiological foundation of clinical psychiatric endpoints in particular and additive scales in general. This is particularly relevant for endpoints used in dementia research. 'Cognition' is composed of functions such as memory, attention, orientation and many more. These individual functions decline in varied and non-linear ways. Here we demonstrate that with progressive diseases cumulative values from multidimensional scales are subject to distortion by the limitations of the additive scale. The non-linearity of the decline of function impedes the calculation of effect sizes based on cumulative values from these multidimensional scales. Statistical analysis needs to be guided by boundaries of the biological condition. Alternatively, we suggest a different approach avoiding the error imposed by over-analysis of cumulative global scores from additive scales.
User's Manual for Total-Tree Multiproduct Cruise Program
Alexander Clark; Thomas M. Burgan; Richard C. Field; Peter E. Dress
1985-01-01
This interactive computer program uses standard tree-cruise data to estimate the weight and volume of the total tree, saw logs, plylogs, chipping logs, pulpwood, crown firewood, and logging residue in timber stands.Input is cumulative cruise data for tree counts by d.b.h. and height. Output is in tables: board-foot volume by d.b.h.; total-tree and tree-component...
ERIC Educational Resources Information Center
Sgammato, Adrienne N.
2009-01-01
This study examined the applicability of a relatively new unidimensional, unfolding item response theory (IRT) model called the generalized graded unfolding model (GGUM; Roberts, Donoghue, & Laughlin, 2000). A total of four scaling methods were applied. Two commonly used cumulative IRT models for polytomous data, the Partial Credit Model and…
Stephen R. Shifley; Frank R. Thompson; William D. Dijak; Zhaofei F. Fan
2008-01-01
Forest landscape disturbance and succession models have become practical tools for large-scale, long-term analyses of the cumulative effects of forest management on real landscapes. They can provide essential information in a spatial context to address management and policy issues related to forest planning, wildlife habitat quality, timber harvesting, fire effects,...
Stoker, Jason M.; Cochrane, Mark A.; Roy, David P.
2013-01-01
With the acquisition of lidar data for over 30 percent of the US, it is now possible to assess the three-dimensional distribution of features at the national scale. This paper integrates over 350 billion lidar points from 28 disparate datasets into a national-scale database and evaluates if height above ground is an important variable in the context of other nationalscale layers, such as the US Geological Survey National Land Cover Database and the US Environmental Protection Agency ecoregions maps. While the results were not homoscedastic and the available data did not allow for a complete height census in any of the classes, it does appear that where lidar data were used, there were detectable differences in heights among many of these national classification schemes. This study supports the hypothesis that there were real, detectable differences in heights in certain national-scale classification schemes, despite height not being a variable used in any of the classification routines.
Universal Off-Equilibrium Scaling of Critical Cumulants in the QCD Phase Diagram
Mukherjee, Swagato; Venugopalan, Raju; Yin, Yi
2016-11-23
Exploiting the universality between the QCD critical point and the three-dimensional Ising model, closed form expressions derived for nonequilibrium critical cumulants on the crossover side of the critical point reveal that they can differ in both magnitude and sign from equilibrium expectations. Here, we demonstrate here that key elements of the Kibble-Zurek framework of nonequilibrium phase transitions can be employed to describe the dynamics of these critical cumulants. Lastly, our results suggest that observables sensitive to critical dynamics in heavy-ion collisions should be expressible as universal scaling functions, thereby providing powerful model-independent guidance in searches for the QCD critical point.
NASA Astrophysics Data System (ADS)
Johansen, Kasper; Grove, James; Denham, Robert; Phinn, Stuart
2013-01-01
Stream bank condition is an important physical form indicator for streams related to the environmental condition of riparian corridors. This research developed and applied an approach for mapping bank condition from airborne light detection and ranging (LiDAR) and high-spatial resolution optical image data in a temperate forest/woodland/urban environment. Field observations of bank condition were related to LiDAR and optical image-derived variables, including bank slope, plant projective cover, bank-full width, valley confinement, bank height, bank top crenulation, and ground vegetation cover. Image-based variables, showing correlation with the field measurements of stream bank condition, were used as input to a cumulative logistic regression model to estimate and map bank condition. The highest correlation was achieved between field-assessed bank condition and image-derived average bank slope (R2=0.60, n=41), ground vegetation cover (R=0.43, n=41), bank width/height ratio (R=0.41, n=41), and valley confinement (producer's accuracy=100%, n=9). Cross-validation showed an average misclassification error of 0.95 from an ordinal scale from 0 to 4 using the developed model. This approach was developed to support the remotely sensed mapping of stream bank condition for 26,000 km of streams in Victoria, Australia, from 2010 to 2012.
A Transition in the Cumulative Reaction Rate of Two Species Diffusion with Bimolecular Reaction
NASA Astrophysics Data System (ADS)
Rajaram, Harihar; Arshadi, Masoud
2015-04-01
Diffusion and bimolecular reaction between two initially separated reacting species is a prototypical small-scale description of reaction induced by transverse mixing. It is also relevant to diffusion controlled transport regimes as encountered in low-permeability matrix blocks in fractured media. In previous work, the reaction-diffusion problem has been analyzed as a Stefan problem involving a distinct moving boundary (reaction front), which predicts that front motion scales as √t, and the cumulative reaction rate scales as 1/√t-. We present a general non-dimensionalization of the problem and a perturbation analysis to show that there is an early time regime where the cumulative reaction rate scales as √t- rather than 1/√t. The duration of this early time regime (where the cumulative rate is kinetically rather than diffusion controlled) depends on the rate parameter, in a manner that is consistently predicted by our non-dimensionalization. We also present results on the scaling of the reaction front width. We present numerical simulations in homogeneous and heterogeneous porous media to demonstrate the limited influence of heterogeneity on the behavior of the reaction-diffusion system. We illustrate applications to the practical problem of in-situ chemical oxidation of TCE and PCE by permanganate, which is employed to remediate contaminated sites where the DNAPLs are largely dissolved in the rock matrix.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Lee, R.R.; Staub, W.P.
1993-08-01
Two environmental assessments considered the potential cumulative environmental impacts resulting from the development of eight proposed hydropower projects in the Nooksack River Basin and 11 proposed projects in the Skagit River Basin, North Cascades, Washington, respectively. While not identified as a target resource, slope stability and the alteration of sediment supply to creeks and river mainstems significantly affect other resources. The slope stability assessment emphasized the potential for cumulative impacts under disturbed conditions (e.g., road construction and timber harvesting) and a landslide-induced pipeline rupture scenario. In the case of small-scale slides, the sluicing action of ruptured pipeline water on themore » fresh landslide scarp was found to be capable of eroding significantly more material than the original landslide. For large-scale landslides, sluiced material was found to be a small increment of the original landslide. These results predicted that hypothetical accidental pipeline rupture by small-scale landslides may result in potential cumulative impacts for 12 of the 19 projects with pending license applications in both river basins. 5 refs., 2 tabs.« less
NASA Astrophysics Data System (ADS)
Wu, M. J.; Guo, P.; Fu, N. F.; Xu, T. L.; Xu, X. S.; Jin, H. L.; Hu, X. G.
2016-06-01
The ionosphere scale height is one of the most significant ionospheric parameters, which contains information about the ion and electron temperatures and dynamics in upper ionosphere. In this paper, an empirical orthogonal function (EOF) analysis method is applied to process all the ionospheric radio occultations of GPS/COSMIC (Constellation Observing System for Meteorology, Ionosphere, and Climate) from the year 2007 to 2011 to reconstruct a global ionospheric scale height model. This monthly medium model has spatial resolution of 5° in geomagnetic latitude (-87.5° ~ 87.5°) and temporal resolution of 2 h in local time. EOF analysis preserves the characteristics of scale height quite well in the geomagnetic latitudinal, anural, seasonal, and diurnal variations. In comparison with COSMIC measurements of the year of 2012, the reconstructed model indicates a reasonable accuracy. In order to improve the topside model of International Reference Ionosphere (IRI), we attempted to adopt the scale height model in the Bent topside model by applying a scale factor q as an additional constraint. With the factor q functioning in the exponent profile of topside ionosphere, the IRI scale height should be forced equal to the precise COSMIC measurements. In this way, the IRI topside profile can be improved to get closer to the realistic density profiles. Internal quality check of this approach is carried out by comparing COSMIC realistic measurements and IRI with or without correction, respectively. In general, the initial IRI model overestimates the topside electron density to some extent, and with the correction introduced by COSMIC scale height model, the deviation of vertical total electron content (VTEC) between them is reduced. Furthermore, independent validation with Global Ionospheric Maps VTEC implies a reasonable improvement in the IRI VTEC with the topside model correction.
NASA Astrophysics Data System (ADS)
Wayson, Michael B.; Bolch, Wesley E.
2018-04-01
Internal radiation dose estimates for diagnostic nuclear medicine procedures are typically calculated for a reference individual. Resultantly, there is uncertainty when determining the organ doses to patients who are not at 50th percentile on either height or weight. This study aims to better personalize internal radiation dose estimates for individual patients by modifying the dose estimates calculated for reference individuals based on easily obtainable morphometric characteristics of the patient. Phantoms of different sitting heights and waist circumferences were constructed based on computational reference phantoms for the newborn, 10 year-old, and adult. Monoenergetic photons and electrons were then simulated separately at 15 energies. Photon and electron specific absorbed fractions (SAFs) were computed for the newly constructed non-reference phantoms and compared to SAFs previously generated for the age-matched reference phantoms. Differences in SAFs were correlated to changes in sitting height and waist circumference to develop scaling factors that could be applied to reference SAFs as morphometry corrections. A further set of arbitrary non-reference phantoms were then constructed and used in validation studies for the SAF scaling factors. Both photon and electron dose scaling methods were found to increase average accuracy when sitting height was used as the scaling parameter (~11%). Photon waist circumference-based scaling factors showed modest increases in average accuracy (~7%) for underweight individuals, but not for overweight individuals. Electron waist circumference-based scaling factors did not show increases in average accuracy. When sitting height and waist circumference scaling factors were combined, modest average gains in accuracy were observed for photons (~6%), but not for electrons. Both photon and electron absorbed doses are more reliably scaled using scaling factors computed in this study. They can be effectively scaled using sitting height alone as patient-specific morphometric parameter.
Wayson, Michael B; Bolch, Wesley E
2018-04-13
Internal radiation dose estimates for diagnostic nuclear medicine procedures are typically calculated for a reference individual. Resultantly, there is uncertainty when determining the organ doses to patients who are not at 50th percentile on either height or weight. This study aims to better personalize internal radiation dose estimates for individual patients by modifying the dose estimates calculated for reference individuals based on easily obtainable morphometric characteristics of the patient. Phantoms of different sitting heights and waist circumferences were constructed based on computational reference phantoms for the newborn, 10 year-old, and adult. Monoenergetic photons and electrons were then simulated separately at 15 energies. Photon and electron specific absorbed fractions (SAFs) were computed for the newly constructed non-reference phantoms and compared to SAFs previously generated for the age-matched reference phantoms. Differences in SAFs were correlated to changes in sitting height and waist circumference to develop scaling factors that could be applied to reference SAFs as morphometry corrections. A further set of arbitrary non-reference phantoms were then constructed and used in validation studies for the SAF scaling factors. Both photon and electron dose scaling methods were found to increase average accuracy when sitting height was used as the scaling parameter (~11%). Photon waist circumference-based scaling factors showed modest increases in average accuracy (~7%) for underweight individuals, but not for overweight individuals. Electron waist circumference-based scaling factors did not show increases in average accuracy. When sitting height and waist circumference scaling factors were combined, modest average gains in accuracy were observed for photons (~6%), but not for electrons. Both photon and electron absorbed doses are more reliably scaled using scaling factors computed in this study. They can be effectively scaled using sitting height alone as patient-specific morphometric parameter.
Gil, Silvia; Aziz, Mariana; Adragna, Marta; Monteverde, Marta; Belgorosky, Alicia
2018-01-01
Growth retardation and its impact on adult height is considered to be one of the most common complications in patients with chronic kidney disease (CKD). Treatment with recombinant human growth hormone (rhGH) has been effective in improving growth in kidney transplantation (KTx) patients, but little data are available on adult height in patients who began rhGh treatment in late puberty. Near-adult height was evaluated in 13 KTx patients treated with rhGH [growth hormone group (GHGr); dose 9.33 mg/m 2 per week] for a period of at least 18 months. At initiation of rhGH treatment, testicular volume was >8 ml and serum testosterone was >1 ng/ml compared with the control group (CGr) of ten KTx patients who did not receive rHGH. All subjects were of similar chronological age and bone age and had similar creatinine clearance (CrCl) levels, cumulative corticoid dose, height standard deviation score (SDS), target height SDS, and target height:initial height at the beginning of the study. Near-adult height was significantly greater in the GHGr than in the CGr (-1.8 ± 0.8 vs. -2.9 ± 1.1; p = 0.018). The difference between initial height and near-adult height in the GHGr revealed a significant height gain (initial height -3.1 ± 1.1; near-adult height -1.8 ± 0.8 SDS, respectively; delta 1.2 ± 0.3; p = 0.021). The CrCl level was not significantly different between the GHGr and CGr at either at study initiation or when attaining near-adult height (p = 0.74 and p = 0.23, respectively). Treatment with rhGH was effective in improving adult height in KTx patients who began treatment in late puberty, without any effect on renal function.
Effects of lisdexamfetamine dimesylate treatment for ADHD on growth.
Faraone, Stephen V; Spencer, Thomas J; Kollins, Scott H; Glatt, Stephen J
2010-01-01
To complete an exploratory uncontrolled study of the effects of lisdexamfetamine dimesylate (LDX) on growth of children treated for attention-deficit/hyperactivity disorder (ADHD). Height, weight, and body mass index (BMI) from 281 children ages 6 to 13 years from longitudinal assessments up to 15 months were compared to norms from the Centers for Disease Control. At study entry, children were taller and heavier than average. Growth delays were largest for weight and BMI, and there was a 13 percentile point decrease in height. Children continued to grow in terms of height while treated with LDX; we found no increase in raw weight or BMI during the study period. LDX treatment was significantly associated with diminished gains in height, weight, and BMI compared to levels that would be expected based on age-appropriate standards from the Centers for Disease Control. Growth delays were greatest for the heaviest and tallest children, for those who had not previously received stimulant therapy, and for those with a greater cumulative exposure to LDX. More work is needed to determine effects on ultimate adult height. Consistent with prior studies of stimulants, treatment with LDX leads to statistically significant reductions in expected height, weight, and BMI. Growth of patients with ADHD treated with LDX should be closely monitored and corrective action taken should growth delays be observed.
The association between weight, height, and head circumference reconsidered.
Scheffler, Christiane; Greil, Holle; Hermanussen, Michael
2017-05-01
Under normal nutritional and health conditions, body height, weight and head circumference are significantly related. We hypothesize that the apparent general association between weight, height, and head circumference of the growing child might be misleading. We reanalyzed data of 7,444 boys and 7,375 girls measured in East-Germany between 1986 and 1990, aged from 0 to 7 y with measurements of body length/height, leg length, sitting height, biacromial shoulder breadth, thoracic breadth, thoracic depth, thoracic circumference, body weight, head volume, percentage of body fat, and hip skinfold vertical, using principal component analysis. Strong associations exist between skeletal growth, fat accumulation, and head volume increments. Yet in spite of this general proportionality, skeletal growth, fat acquisition, and head growth exhibit different patterns. Three components explain between almost 60% and more than 75% of cumulative variance between birth and age 7 y. Parameters of skeletal growth predominantly load on the first component and clearly separate from indicators of fat deposition. After age of 2 y, head volume loads on a separate third component in both sexes indicating independence of head growth. Under appropriate nutritional and health circumstances, nutritional status, body size, and head circumference are not related.
Reliable scar scoring system to assess photographs of burn patients.
Mecott, Gabriel A; Finnerty, Celeste C; Herndon, David N; Al-Mousawi, Ahmed M; Branski, Ludwik K; Hegde, Sachin; Kraft, Robert; Williams, Felicia N; Maldonado, Susana A; Rivero, Haidy G; Rodriguez-Escobar, Noe; Jeschke, Marc G
2015-12-01
Several scar-scoring scales exist to clinically monitor burn scar development and maturation. Although scoring scars through direct clinical examination is ideal, scars must sometimes be scored from photographs. No scar scale currently exists for the latter purpose. We modified a previously described scar scale (Yeong et al., J Burn Care Rehabil 1997) and tested the reliability of this new scale in assessing burn scars from photographs. The new scale consisted of three parameters as follows: scar height, surface appearance, and color mismatch. Each parameter was assigned a score of 1 (best) to 4 (worst), generating a total score of 3-12. Five physicians with burns training scored 120 representative photographs using the original and modified scales. Reliability was analyzed using coefficient of agreement, Cronbach alpha, intraclass correlation coefficient, variance, and coefficient of variance. Analysis of variance was performed using the Kruskal-Wallis test. Color mismatch and scar height scores were validated by analyzing actual height and color differences. The intraclass correlation coefficient, the coefficient of agreement, and Cronbach alpha were higher for the modified scale than those of the original scale. The original scale produced more variance than that in the modified scale. Subanalysis demonstrated that, for all categories, the modified scale had greater correlation and reliability than the original scale. The correlation between color mismatch scores and actual color differences was 0.84 and between scar height scores and actual height was 0.81. The modified scar scale is a simple, reliable, and useful scale for evaluating photographs of burn patients. Copyright © 2015 Elsevier Inc. All rights reserved.
Cumulative Social Risk and Obesity in Early Childhood
Duarte, Cristiane S.; Chambers, Earle C.; Boynton-Jarrett, Renée
2012-01-01
OBJECTIVES: The goal of this study was to examine the relationship between cumulative social adversity and childhood obesity among preschool-aged children (N = 1605) in the Fragile Families and Child Wellbeing Study. METHODS: Maternal reports of intimate partner violence, food insecurity, housing insecurity, maternal depressive symptoms, maternal substance use, and father’s incarceration were obtained when the child was 1 and 3 years of age. Two cumulative social risk scores were created by summing the 6 factors assessed at ages 1 and 3 years. Child height and weight were measured at 5 years of age. Logistic regression models stratified according to gender were used to estimate the association between cumulative social risk and obesity, adjusting for sociodemographic factors. RESULTS: Seventeen percent of children were obese at age 5 years, and 57% had at least 1 social risk factor. Adjusting for sociodemographic factors, girls experiencing high cumulative social risk (≥2 factors) at age 1 year only (odds ratio [OR]: 2.1 [95% confidence interval [CI]: 1.1–4.1]) or at 3 years only (OR: 2.2 [95% CI: 1.2–4.2]) were at increased odds of being obese compared with girls with no risk factors at either time point. Those experiencing high cumulative risk at age 1 and 3 years were not at statistically significant odds of being obese (OR: 1.9 [95% CI: 0.9–4.0]). No significant associations were noted among boys. CONCLUSIONS: There seems to be gender differences in the effects of cumulative social risk factors on the prevalence of obesity at 5 years of age. Understanding the social context of families could make for more effective preventive efforts to combat childhood obesity. PMID:22508921
Eric J. Gustafson; David E. Lytle; Randy Swaty; Craig Loehle
2007-01-01
While the cumulative effects of the actions of multiple owners have long been recognized as critically relevant to efforts to maintain sustainable forests at the landscape scale, few studies have addressed these effects. We used the HARVEST timber harvest simulator to predict the cumulative effects of four owner groups (two paper companies, a state forest and non-...
Spectroscopic Study of a Dark Lane and a Cool Loop in a Solar Limb Active Region by Hinode/EIS
NASA Astrophysics Data System (ADS)
Lee, Kyoung-Sun; Imada, S.; Moon, Y.-J.; Lee, Jin-Yi
2014-01-01
We investigated a cool loop and a dark lane over a limb active region on 2007 March 14 using the Hinode/EUV Imaging Spectrometer. The cool loop is clearly seen in the spectral lines formed at the transition region temperature. The dark lane is characterized by an elongated faint structure in the coronal spectral lines and is rooted on a bright point. We examined their electron densities, Doppler velocities, and nonthermal velocities as a function of distance from the limb. We derived electron densities using the density sensitive line pairs of Mg VII, Si X, Fe XII, Fe XIII, and Fe XIV spectra. We also compared the observed density scale heights with the calculated scale heights from each peak formation temperatures of the spectral lines under the hydrostatic equilibrium. We noted that the observed density scale heights of the cool loop are consistent with the calculated heights, with the exception of one observed cooler temperature; we also found that the observed scale heights of the dark lane are much lower than their calculated scale heights. The nonthermal velocity in the cool loop slightly decreases along the loop, while nonthermal velocity in the dark lane sharply falls off with height. Such a decrease in the nonthermal velocity may be explained by wave damping near the solar surface or by turbulence due to magnetic reconnection near the bright point.
Guzman, Jaime; Kerr, Tristan; Ward, Leanne M; Ma, Jinhui; Oen, Kiem; Rosenberg, Alan M; Feldman, Brian M; Boire, Gilles; Houghton, Kristin; Dancey, Paul; Scuccimarri, Rosie; Bruns, Alessandra; Huber, Adam M; Watanabe Duffy, Karen; Shiff, Natalie J; Berard, Roberta A; Levy, Deborah M; Stringer, Elizabeth; Morishita, Kimberly; Johnson, Nicole; Cabral, David A; Larché, Maggie; Petty, Ross E; Laxer, Ronald M; Silverman, Earl; Miettunen, Paivi; Chetaille, Anne-Laure; Haddad, Elie; Spiegel, Lynn; Turvey, Stuart E; Schmeling, Heinrike; Lang, Bianca; Ellsworth, Janet; Ramsey, Suzanne E; Roth, Johannes; Campillo, Sarah; Benseler, Susanne; Chédeville, Gaëlle; Schneider, Rayfel; Tse, Shirley M L; Bolaria, Roxana; Gross, Katherine; Feldman, Debbie; Cameron, Bonnie; Jurencak, Roman; Dorval, Jean; LeBlanc, Claire; St Cyr, Claire; Gibbon, Michele; Yeung, Rae S M; Duffy, Ciarán M; Tucker, Lori B
2017-08-22
With modern treatments, the effect of juvenile idiopathic arthritis (JIA) on growth may be less than previously reported. Our objective was to describe height, weight and body mass index (BMI) development in a contemporary JIA inception cohort. Canadian children newly-diagnosed with JIA 2005-2010 had weight and height measurements every 6 months for 2 years, then yearly up to 5 years. These measurements were used to calculate mean age- and sex-standardized Z-scores, and estimate prevalence and cumulative incidence of growth impairments, and the impact of disease activity and corticosteroids on growth. One thousand one hundred forty seven children were followed for median 35.5 months. Mean Z-scores, and the point prevalence of short stature (height < 2.5th percentile, 2.5% to 3.4%) and obesity (BMI > 95th percentile, 15.8% to 16.4%) remained unchanged in the whole cohort. Thirty-three children (2.9%) developed new-onset short stature, while 27 (2.4%) developed tall stature (>97.5th percentile). Children with systemic arthritis (n = 77) had an estimated 3-year cumulative incidence of 9.3% (95%CI: 4.3-19.7) for new-onset short stature and 34.4% (23-49.4) for obesity. Most children (81.7%) received no systemic corticosteroids, but 1 mg/Kg/day prednisone-equivalent maintained for 6 months corresponded to a drop of 0.64 height Z-scores (0.56-0.82) and an increase of 0.74 BMI Z-scores (0.56-0.92). An increase of 1 in the 10-cm physician global assessment of disease activity maintained for 6 months corresponded to a drop of 0.01 height Z-scores (0-0.02). Most children in this modern JIA cohort grew and gained weight as children in the general population. About 1 in 10 children who had systemic arthritis, uncontrolled disease and/or prolonged corticosteroid use, had increased risk of growth impairment.
NASA Astrophysics Data System (ADS)
Ram Sudarsanam, Tulasi; Su, Shin-Yi; Liu, C. H.; Reinisch, Bodo
In this study, we propose the assimilation of topside in situ electron density data from ROCSAT-1 satellite along with the ionosonde measurements for accurate determination of topside iono-spheric effective scale heights (HT) using -Chapman function. The reconstructed topside elec-tron density profiles using these scale heights exhibit an excellent similitude with Jicamarca Incoherent Scatter Radar (ISR) profiles, and are much better representations than the existing methods of Reinisch-Huang method and/or the empirical IRI-2007 model. The main advan-tage with this method is that it allows the precise determination of the effective scale height (HT) and the topside electron density profiles at a dense network of ionosonde/digisonde sta-tions where no ISR facilities are available. The demonstration of the method is applied by investigating the diurnal, seasonal and solar activity variations of HT over the dip-equatorial station Jicamarca and the mid-latitude station Grahamstown. The diurnal variation of scale heights over Jicamarca consistently exhibits a morning time descent followed by a minimum around 0700-0800 LT and a pronounced maximum at noon during all the seasons of both high and moderate solar activity periods. Further, the scale heights exhibit a secondary maximum during the post-sunset hours of equinoctial and summer months, whereas the post-sunset peak is absent during the winter months. These typical features are further investigated using the topside ion properties obtained by ROCSAT-1 as well as SAMI2 model simulations. The re-sults consistently indicate that the diurnal variation of the effective scale height (HT) does not closely follow the plasma temperature variation and at equatorial latitudes is largely controlled by the vertical ExB drift.
Relaxation Processes and Time Scale Transformation.
1982-03-01
the response function may be immediately recognized as being 14 of the Kubo - Green type in the classical regime. Given this general framework, it is now...discussions of the master equation, 2and has recently been applied in cumulative damage models with discrete time parameter .3 However, it does not seem to...development parameter is taken tG be a positive, cumulative function that increases from an origin monotonically. Consider two continuous time scales e and t
Small-scale open ocean currents have large effects on wind wave heights
NASA Astrophysics Data System (ADS)
Ardhuin, Fabrice; Gille, Sarah T.; Menemenlis, Dimitris; Rocha, Cesar B.; Rascle, Nicolas; Chapron, Bertrand; Gula, Jonathan; Molemaker, Jeroen
2017-06-01
Tidal currents and large-scale oceanic currents are known to modify ocean wave properties, causing extreme sea states that are a hazard to navigation. Recent advances in the understanding and modeling capability of open ocean currents have revealed the ubiquitous presence of eddies, fronts, and filaments at scales 10-100 km. Based on realistic numerical models, we show that these structures can be the main source of variability in significant wave heights at scales less than 200 km, including important variations down to 10 km. Model results are consistent with wave height variations along satellite altimeter tracks, resolved at scales larger than 50 km. The spectrum of significant wave heights is found to be of the order of 70>
Restrepo, Alejandro Estrada; Rueda, Juan Diego Gomez; Aguirre, Cristina Carreño; López, Lorena Patricia Mancilla
2013-01-01
Objective: to observe the relationship between socioeconomic status, height and nutritional problems related to obesity, overweight and risk of metabolic complications in men and women of Medellin (Colombia). Methods: cross-sectional study with a sample of 5556 adults between 18 and 69 years of age. We assessed weight, height and waist circumference. Socioeconomic variables were evaluated by family income, socioeconomic stratum and academic level achieved. Results: we found that in men and women the height reached in adulthood is associated with socioeconomic conditions as measured by the socioeconomic strata and family income. In women, height, age, and socioeconomic strata are associated with obesity, overweight and risk of obesity, and risk of metabolic complications. Conclusion: These results are not only from individual unhealthy habits, such as eating patterns based on high density foods combined with low energy expenditure, but also from the cumulative effect of food deprivation throughout life. Therefore, policies intended to prevent them should take a preventive approach that begins before birth and continues during childhood and adulthood. PMID:24892612
NASA Astrophysics Data System (ADS)
Yang, Changjun; Zhao, Biqiang; Zhu, Jie; Yue, Xinan; Wan, Weixing
2017-10-01
In this study we propose the combination of topside in-situ ion density data from the Communication/Navigation Outage Forecast System (C/NOFS) along with the electron density profile measurement from Constellation Observing System for Meteorology, Ionosphere & Climate (COSMIC) satellites Radio Occultation (RO) for studying the spatial and temporal variations of the ionospheric upper transition height (hT) and the oxygen ion (O+) density scale height. The latitudinal, local time and seasonal distributions of upper transition height show more consistency between hT re-calculated by the profile of the O+ using an α-Chapman function with linearly variable scale height and that determined from direct in-situ ion composition measurements, than with constant scale height and only the COSMIC data. The discrepancy in the values of hT between the C/NOFS measurement and that derived by the combination of COSMIC and C/NOFS satellites observations with variable scale height turns larger as the solar activity decreases, which suggests that the photochemistry and the electrodynamics of the equatorial ionosphere during the extreme solar minimum period produce abnormal structures in the vertical plasma distribution. The diurnal variation of scale heights (Hm) exhibits a minimum after sunrise and a maximum around noon near the geomagnetic equator. Further, the values of Hm exhibit a maximum in the summer hemisphere during daytime, whereas in the winter hemisphere the maximum is during night. Those features of Hm consistently indicate the prominent role of the vertical electromagnetic (E × B) drift in the equatorial ionosphere.
NASA Astrophysics Data System (ADS)
Zhao, Biqiang
2017-04-01
In this study we propose the combination of topside in-situ ion density data from the Communication/Navigation Outage Forecast System (C/NOFS) along with the electron density profile measurement from Constellation Observing System for Meteorology, Ionosphere & Climate (COSMIC) satellites Radio Occultation (RO) for studying the spatial and temporal variations of the ionospheric upper transition height (hT) and the oxygen ion (O+) density scale height. The latitudinal, local time and seasonal distributions of upper transition height show more consistency between hT re-calculated by the profile of the O+ using an a-Chapman function with linearly variable scale height and that determined from direct in-situ ion composition measurements, than with constant scale height and only the COSMIC data. The discrepancy in the values of hT between the C/NOFS measurement and that derived by the combination of COSMIC and C/NOFS satellites observations with variable scale height turns larger as the solar activity decreases, which suggests that the photochemistry and the electrodynamics of the equatorial ionosphere during the extreme solar minimum period produce abnormal structures in the vertical plasma distribution. The diurnal variation of scale heights (Hm) exhibits a minimum after sunrise and a maximum around noon near the geomagnetic equator. Further, the values of Hm exhibit a maximum in the summer hemisphere during daytime, whereas in the winter hemisphere the maximum is during night. Those features of Hm consistently indicate the prominent role of the vertical electromagnetic (E×B) drift in the equatorial ionosphere.
Radiative transfer calculations of the diffuse ionized gas in disc galaxies with cosmic ray feedback
NASA Astrophysics Data System (ADS)
Vandenbroucke, Bert; Wood, Kenneth; Girichidis, Philipp; Hill, Alex S.; Peters, Thomas
2018-05-01
The large vertical scale heights of the diffuse ionized gas (DIG) in disc galaxies are challenging to model, as hydrodynamical models including only thermal feedback seem to be unable to support gas at these heights. In this paper, we use a three-dimensional Monte Carlo radiation transfer code to post-process disc simulations of the Simulating the Life-Cycle of Molecular Clouds project that include feedback by cosmic rays. We show that the more extended discs in simulations including cosmic ray feedback naturally lead to larger scale heights for the DIG which are more in line with observed scale heights. We also show that including a fiducial cosmic ray heating term in our model can help to increase the temperature as a function of disc scale height, but fails to reproduce observed DIG nitrogen and sulphur forbidden line intensities. We show that, to reproduce these line emissions, we require a heating mechanism that affects gas over a larger density range than is achieved by cosmic ray heating, which can be achieved by fine tuning the total luminosity of ionizing sources to get an appropriate ionizing spectrum as a function of scale height. This result sheds a new light on the relation between forbidden line emissions and temperature profiles for realistic DIG gas distributions.
The distribution of free electrons in the inner galaxy from pulsar dispersion measures
NASA Technical Reports Server (NTRS)
Harding, D. S.; Harding, A. K.
1981-01-01
The dispersion measures of a sample of 149 pulsars in the inner Galaxy (absolute value of l 50 deg) were statistically analyzed to deduce the large-scale distribution of free thermal electrons in this region. The dispersion measure distribution of these pulsars shows significant evidence for a decrease in the electron scale height from a local value greater than the pulsar scale height to a value less than the pulsar scale height at galactocentric radii inside of approximately 7 kpc. An increase in the electron density (to a value around .15/cu cm at 4 to 5 kpc) must accompany such a decrease in scale height. There is also evidence for a large-scale warp in the electron distribution below the b + 0 deg plane inside the Solar circle. A model is proposed for the electron distribution which incorporates these features and Monte Carlo generated dispersion measure distributions are presented for parameters which best reproduce the observed pulsar distributions.
Spectroscopic study of a dark lane and a cool loop in a solar limb active region by Hinode/EIS
DOE Office of Scientific and Technical Information (OSTI.GOV)
Lee, Kyoung-Sun; Imada, S.; Moon, Y.-J.
2014-01-10
We investigated a cool loop and a dark lane over a limb active region on 2007 March 14 using the Hinode/EUV Imaging Spectrometer. The cool loop is clearly seen in the spectral lines formed at the transition region temperature. The dark lane is characterized by an elongated faint structure in the coronal spectral lines and is rooted on a bright point. We examined their electron densities, Doppler velocities, and nonthermal velocities as a function of distance from the limb. We derived electron densities using the density sensitive line pairs of Mg VII, Si X, Fe XII, Fe XIII, and Femore » XIV spectra. We also compared the observed density scale heights with the calculated scale heights from each peak formation temperatures of the spectral lines under the hydrostatic equilibrium. We noted that the observed density scale heights of the cool loop are consistent with the calculated heights, with the exception of one observed cooler temperature; we also found that the observed scale heights of the dark lane are much lower than their calculated scale heights. The nonthermal velocity in the cool loop slightly decreases along the loop, while nonthermal velocity in the dark lane sharply falls off with height. Such a decrease in the nonthermal velocity may be explained by wave damping near the solar surface or by turbulence due to magnetic reconnection near the bright point.« less
Scaling of adult body weight to height across sex and race/ethnic groups: relevance to BMI.
Heymsfield, Steven B; Peterson, Courtney M; Thomas, Diana M; Heo, Moonseong; Schuna, John M; Hong, Sangmo; Choi, Woong
2014-12-01
Body mass index (BMI) is formulated on the assumption that body weight (BW) scales to height with a power of 2 (BW∝height(2)), independent of sex and race-ethnicity. Powers differing from 2 are observed in studies of selected samples, thus raising the question if BMI is a generalizable metric that makes BW independent of height across populations. The objectives were to test the hypothesis that adult BW scales to height with a power of 2 independent of sex and race-ethnicity and to advance an understanding of BMI as a measure of shape by extending allometric analyses to waist circumference (WC). We conducted cross-sectional subject evaluations, including body composition, from the NHANES and the Korean NHANES (KNHANES). Variations of the allometric model (Y = αX(β)) were used to establish height scaling powers (β ± SE) across non-Hispanic white and black, Mexican American, and Korean men and women. Exploratory analyses in population samples established age and adiposity as important independent determinants of height scaling powers (i.e., β). After age and adiposity in the next series of analyses were controlled for, BW scaling powers were nonsignificantly different between race/ethnic groups within each sex group; WC findings were similar in women, whereas small but significant between-race differences were observed in the men. Sex differences in β values were nonsignificant except for BW in non-Hispanic blacks and WC in Koreans (P < 0.05). Nationally representative powers for BW were (NHANES/KNHANES) 2.12 ± 0.05/2.11 ± 0.06 for men and 2.02 ± 0.04/1.99 ± 0.06 for women and for WC were 0.66 ± 0.03/0.67 ± 0.05 for men and 0.61 ± 0.04/0.56 ± 0.05 for women. Adult BW scales to height with a power of ∼2 across the 8 sex and race/ethnic groups, an observation that makes BMI a generalizable height-independent measure of shape across most populations. WC also follows generalizable scaling rules, a finding that has implications for defining body shape in populations who differ in stature. © 2014 American Society for Nutrition.
A hybrid technique for sinus floor elevation in the severely resorbed posterior maxilla
Jung, Ui-Won; Hong, Ji-Youn; Lee, Jung-Seok; Kim, Chang-Sung; Cho, Kyoo-Sung
2010-01-01
Purpose This study aimed to evaluate the effectiveness of the modified sinus floor elevation technique described hereafter as a "hybrid technique," in 11 patients with severely resorbed posterior maxillae. Methods Eleven patients who received 22 implants in the maxillary premolar and molar areas by the hybrid technique were enrolled in this study. A slot-shaped osteotomy for access was prepared on the lateral wall along the lower border of the sinus floor. The Schneiderian membrane was fully reflected through the lateral slot. Following drilling with the membrane protected by a periosteal elevator, the bone was grafted. All implants were placed simultaneously with sinus augmentation. The cumulative success rate was calculated and clinical parameters were recorded. Radiographic measurements were performed. Results All implants were well maintained at last follow up (cumulative success rate=100%). The mean residual bone height, augmented bone height, crown-to-implant ratio, and marginal bone loss were 4.1±1.64 mm, 8.76±1.77 mm, 1.21±0.33 mm, and 0.34±0.72 mm, respectively. Conclusions Simultaneous implant placement with sinus augmentation by hybrid technique showed successful clinical results over a 2-year observation period and may be a reliable modality for reconstruction of a severely resorbed posterior maxilla. PMID:20498764
NASA Astrophysics Data System (ADS)
Su, Y.; Guo, Q.; Jin, S.; Gao, S.; Hu, T.; Liu, J.; Xue, B. L.
2017-12-01
Tree height is an important forest structure parameter for understanding forest ecosystem and improving the accuracy of global carbon stock quantification. Light detection and ranging (LiDAR) can provide accurate tree height measurements, but its use in large-scale tree height mapping is limited by the spatial availability. Random Forest (RF) has been one of the most commonly used algorithms for mapping large-scale tree height through the fusion of LiDAR and other remotely sensed datasets. However, how the variances in vegetation types, geolocations and spatial scales of different study sites influence the RF results is still a question that needs to be addressed. In this study, we selected 16 study sites across four vegetation types in United States (U.S.) fully covered by airborne LiDAR data, and the area of each site was 100 km2. The LiDAR-derived canopy height models (CHMs) were used as the ground truth to train the RF algorithm to predict canopy height from other remotely sensed variables, such as Landsat TM imagery, terrain information and climate surfaces. To address the abovementioned question, 22 models were run under different combinations of vegetation types, geolocations and spatial scales. The results show that the RF model trained at one specific location or vegetation type cannot be used to predict tree height in other locations or vegetation types. However, by training the RF model using samples from all locations and vegetation types, a universal model can be achieved for predicting canopy height across different locations and vegetation types. Moreover, the number of training samples and the targeted spatial resolution of the canopy height product have noticeable influence on the RF prediction accuracy.
Growth of ponderosa pine seedlings as affected by air pollution
NASA Astrophysics Data System (ADS)
Momen, B.; Anderson, P. D.; Houpis, J. L. J.; Helms, J. A.
The effect of air pollution on seedling survival and competitive ability is important to natural and artificial regeneration of forest trees. Although biochemical and physiological processes are sensitive indicators of pollution stress, the cumulative effects of air pollutants on seedling vigor and competitive ability may be assessed directly from whole-plant growth characteristics such as diameter, height, and photosynthetic area. A few studies that have examined intraspecific variation in seedling response to air pollution indicate that genotypic differences are important in assessing potential effects of air pollution on forest regeneration. Here, we studied the effects of acid rain (no-rain, pH 5.1 rain, pH 3.0 rain) and ozone (filtered, ambient, twice-ambient) in the field on height, diameter, volume, the height:diameter ratio, maximum needle length, and time to reach maximum needle length in seedlings of three families of ponderosa pine ( Pinus ponderosa Dougl. ex Laws). Seedling diameter, height, volume, and height:diameter ratio related significantly to their pre-treatment values. Twice-ambient ozone decreased seedling diameter compared with ozone-filtered air. A significant family-by-ozone interaction was detected for seedling height, as the height of only one of the three families was decreased by twice-ambient ozone compared with the ambient level. Seedling diameter was larger and the height:diameter ratio was smaller under pH 3.0 rain compared to either the no-rain or the pH 5.1-rain treatment. This suggests greater seedling vigor, perhaps due to a foliar fertilization effect of the pH 3.0 rain.
Cantoral, A; Téllez-Rojo, M M; Ettinger, A S; Hu, H; Hernández-Ávila, M; Peterson, K
2016-02-01
Consumption of sugar-sweetened beverages (SSB) has been associated with risk of obesity, but little evidence exists to evaluate if age of introduction and cumulative SSB consumption increases risk in children. The objective of the study was to estimate the relationship between age of introduction and cumulative SSB consumption with risk of obesity in 227 Mexican children. SSB intake was measured every 6 months; age of introduction and cumulative consumption during the pre-school period were calculated. Height, weight, waist circumference, SSB intake and other relevant variables were measured at age 8-14 years and obesity defined using standard criteria. All participants were introduced to SSB before age 24 months and most (73%) before 12 months. Early SSB introduction (≤12 months) was not significantly associated with increased odds of obesity (odds ratio [OR] = 2.00, 95% confidence interval [CI]: 0.87, 4.59). However, children in the highest tertile of cumulative SSB consumption, compared with the lowest, had almost three times the odds of general (OR = 2.99, 95% CI: 1.27, 7.00) and abdominal (OR = 2.70, 95% CI: 1.03, 7.03) obesity at age 8-14 years. High SSB consumption increased the likelihood of obesity in 8-14-year-old children. Our results suggest that SSB intake should be delayed and excessive SSB consumption in pre-school period should be avoided. © 2015 World Obesity.
Cumulative trauma, PTSD and dissociation among Ethiopian refugees in Israel.
Finklestein, Michal; Solomon, Zahava
2009-01-01
The aim of this study was to examine the exposure of Ethiopian refugees to pre-, peri- and post-migration stressful events and their implications for both posttraumatic stress disorder (PTSD) and dissociation. A random sample (N = 478) of three groups of refugees took part in the research ("Moses" immigrants, 1984, n = 165; "Solomon" immigrants, 1991, n = 169; "Family Reunification" immigrants, 1995, n = 144). Exposure to stressful events and posttraumatic symptoms were assessed via the Harvard Trauma Questionnaire (HTQ). Post-migration difficulties were assessed via the Post Migration Living Difficulties (PMLD) scale. Dissociation was evaluated using the Dissociation Experience Scale (DES). Significant differences were found among the groups in the rates of PTSD (27%, 15%, and 26%, respectively), but no differences were found in dissociation. A significant relationship was found between PTSD symptoms and cumulative trauma among the three groups, but no such relationship was found between dissociation and cumulative trauma. The differences among the groups were discussed in light of the unique characteristics of cumulative trauma, PTSD and dissociation among Ethiopian refugees.
Effect of inhaled glucocorticoids in childhood on adult height.
Kelly, H William; Sternberg, Alice L; Lescher, Rachel; Fuhlbrigge, Anne L; Williams, Paul; Zeiger, Robert S; Raissy, Hengameh H; Van Natta, Mark L; Tonascia, James; Strunk, Robert C
2012-09-06
The use of inhaled glucocorticoids for persistent asthma causes a temporary reduction in growth velocity in prepubertal children. The resulting decrease in attained height 1 to 4 years after the initiation of inhaled glucocorticoids is thought not to decrease attained adult height. We measured adult height in 943 of 1041 participants (90.6%) in the Childhood Asthma Management Program; adult height was determined at a mean (±SD) age of 24.9±2.7 years. Starting at the age of 5 to 13 years, the participants had been randomly assigned to receive 400 μg of budesonide, 16 mg of nedocromil, or placebo daily for 4 to 6 years. We calculated differences in adult height for each active treatment group, as compared with placebo, using multiple linear regression with adjustment for demographic characteristics, asthma features, and height at trial entry. Mean adult height was 1.2 cm lower (95% confidence interval [CI], -1.9 to -0.5) in the budesonide group than in the placebo group (P=0.001) and was 0.2 cm lower (95% CI, -0.9 to 0.5) in the nedocromil group than in the placebo group (P=0.61). A larger daily dose of inhaled glucocorticoid in the first 2 years was associated with a lower adult height (-0.1 cm for each microgram per kilogram of body weight) (P=0.007). The reduction in adult height in the budesonide group as compared with the placebo group was similar to that seen after 2 years of treatment (-1.3 cm; 95% CI, -1.7 to -0.9). During the first 2 years, decreased growth velocity in the budesonide group occurred primarily in prepubertal participants. The initial decrease in attained height associated with the use of inhaled glucocorticoids in prepubertal children persisted as a reduction in adult height, although the decrease was not progressive or cumulative. (Funded by the National Heart, Lung, and Blood Institute and the National Center for Research Resources; CAMP ClinicalTrials.gov number, NCT00000575.).
Barnes, Timothy L.; Colabianchi, Natalie; Hibbert, James D.; Porter, Dwayne E.; Lawson, Andrew B.; Liese, Angela D.
2016-01-01
Choice of neighborhood scale affects associations between environmental attributes and health-related outcomes. This phenomenon, a part of the modifiable areal unit problem, has been described fully in geography but not as it relates to food environment research. Using two administrative-based geographic boundaries (census tracts and block groups), supermarket geographic measures (density, cumulative opportunity and distance to nearest) were created to examine differences by scale and associations between three common U.S. Census–based socioeconomic status (SES) characteristics (median household income, percentage of population living below poverty and percentage of population with at least a high school education) and a summary neighborhood SES z-score in an eight-county region of South Carolina. General linear mixed-models were used. Overall, both supermarket density and cumulative opportunity were higher when using census tract boundaries compared to block groups. In analytic models, higher median household income was significantly associated with lower neighborhood supermarket density and lower cumulative opportunity using either the census tract or block group boundaries, and neighborhood poverty was positively associated with supermarket density and cumulative opportunity. Both median household income and percent high school education were positively associated with distance to nearest supermarket using either boundary definition, whereas neighborhood poverty had an inverse association. Findings from this study support the premise that supermarket measures can differ by choice of geographic scale and can influence associations between measures. Researchers should consider the most appropriate geographic scale carefully when conducting food environment studies. PMID:27022204
Barnes, Timothy L; Colabianchi, Natalie; Hibbert, James D; Porter, Dwayne E; Lawson, Andrew B; Liese, Angela D
2016-03-01
Choice of neighborhood scale affects associations between environmental attributes and health-related outcomes. This phenomenon, a part of the modifiable areal unit problem, has been described fully in geography but not as it relates to food environment research. Using two administrative-based geographic boundaries (census tracts and block groups), supermarket geographic measures (density, cumulative opportunity and distance to nearest) were created to examine differences by scale and associations between three common U.S. Census-based socioeconomic status (SES) characteristics (median household income, percentage of population living below poverty and percentage of population with at least a high school education) and a summary neighborhood SES z-score in an eight-county region of South Carolina. General linear mixed-models were used. Overall, both supermarket density and cumulative opportunity were higher when using census tract boundaries compared to block groups. In analytic models, higher median household income was significantly associated with lower neighborhood supermarket density and lower cumulative opportunity using either the census tract or block group boundaries, and neighborhood poverty was positively associated with supermarket density and cumulative opportunity. Both median household income and percent high school education were positively associated with distance to nearest supermarket using either boundary definition, whereas neighborhood poverty had an inverse association. Findings from this study support the premise that supermarket measures can differ by choice of geographic scale and can influence associations between measures. Researchers should consider the most appropriate geographic scale carefully when conducting food environment studies.
Effect of the Diurnal Atmospheric Bulge on Satellite Accelerations
NASA Technical Reports Server (NTRS)
Wyatt, Stanley P.
1961-01-01
Formulas are developed to express the secular acceleration of a satellite on passing through an atmosphere which bulges in the sunward direction and in which the scale height increases with height, these two properties of the high atmosphere having previously been established from satellite observations. Comparison of the new formulas with those for a spherically symmetric atmosphere of constant scale height indicates that deduced atmospheric densities may be systematically incorrect by up to 50 or 60 percent at heights of 500 to 600 km when the earlier and simpler equations are used.
NASA Astrophysics Data System (ADS)
Park, Jaeheung; Kwak, Young-Sil; Mun, Jun-Chul; Min, Kyoung-Wook
2015-12-01
In this study, we estimated the topside scale height of plasma density (Hm) using the Swarm constellation and ionosondes in Korea. The Hm above Korean Peninsula is generally around 50 km. Statistical distributions of the topside scale height exhibited a complex dependence upon local time and season. The results were in general agreement with those of Tulasi Ram et al. (2009), who used the same method to calculate the topside scale height in a mid-latitude region. On the contrary, our results did not fully coincide with those obtained by Liu et al. (2007), who used electron density profiles from Arecibo Incoherent Scatter Radar (ISR) between 1966 and 2002. The disagreement may result from the limitations in our approximation method and data coverage used for estimations, as well as the inherent dependence of Hm on Geographic LONgitude (GLON).
Universal scaling law in human behavioral organization.
Nakamura, Toru; Kiyono, Ken; Yoshiuchi, Kazuhiro; Nakahara, Rika; Struzik, Zbigniew R; Yamamoto, Yoshiharu
2007-09-28
We describe the nature of human behavioral organization, specifically how resting and active periods are interwoven throughout daily life. Active period durations with physical activity count successively above a predefined threshold, when rescaled with individual means, follow a universal stretched exponential (gamma-type) cumulative distribution with characteristic time, both in healthy individuals and in patients with major depressive disorder. On the other hand, resting period durations below the threshold for both groups obey a scale-free power-law cumulative distribution over two decades, with significantly lower scaling exponents in the patients. We thus find universal distribution laws governing human behavioral organization, with a parameter altered in depression.
Universal Scaling Law in Human Behavioral Organization
NASA Astrophysics Data System (ADS)
Nakamura, Toru; Kiyono, Ken; Yoshiuchi, Kazuhiro; Nakahara, Rika; Struzik, Zbigniew R.; Yamamoto, Yoshiharu
2007-09-01
We describe the nature of human behavioral organization, specifically how resting and active periods are interwoven throughout daily life. Active period durations with physical activity count successively above a predefined threshold, when rescaled with individual means, follow a universal stretched exponential (gamma-type) cumulative distribution with characteristic time, both in healthy individuals and in patients with major depressive disorder. On the other hand, resting period durations below the threshold for both groups obey a scale-free power-law cumulative distribution over two decades, with significantly lower scaling exponents in the patients. We thus find universal distribution laws governing human behavioral organization, with a parameter altered in depression.
Integrated and differential accuracy in resummed cross sections
Bertolini, Daniele; Solon, Mikhail P.; Walsh, Jonathan R.
2017-03-30
Standard QCD resummation techniques provide precise predictions for the spectrum and the cumulant of a given observable. The integrated spectrum and the cumulant differ by higher-order terms which, however, can be numerically significant. Here in this paper we propose a method, which we call the σ-improved scheme, to resolve this issue. It consists of two steps: (i) include higher-order terms in the spectrum to improve the agreement with the cumulant central value, and (ii) employ profile scales that encode correlations between different points to give robust uncertainty estimates for the integrated spectrum. We provide a generic algorithm for determining suchmore » profile scales, and show the application to the thrust distribution in e +e - collisions at NLL'+NLO and NNLL'+NNLO.« less
ERIC Educational Resources Information Center
Limpens, Vera; Buszard, Tim; Shoemaker, Emma; Savelsbergh, Geert J. P.; Reid, Machar
2018-01-01
Purpose: The net height in tennis (0.91 m) is approximately 50% of a professional tennis player's height. Children are also expected to play with this net height, even though it is approximately 70% of the average 10-year-old's height. This study examined the immediate effect of lowering net height on the performance characteristics of skilled…
Castellucci, H I; Arezes, P M; Molenbroek, J F M
2015-01-01
Most of the worldwide standards used for furniture selection suggest the use of the Stature of the school children, assuming that all the other anthropometric characteristics will also be appropriate. However, it is important to consider that students' growth differ with age. The aim of this study is to determine if Popliteal Height can be used as a better, or more adequate, measure for classroom furniture selection when comparing with Stature. This study involved a representative group of 3046 students from the Valparaíso Region, in Chile. Regarding the methodology, eight anthropometric measures were gathered, as well as six furniture dimensions from the Chilean standard. After assigning the level of school furniture using Stature and Popliteal Height to each of the students, six mismatch equations were applied. The results show that when using Popliteal Height, higher levels of match were obtained for the two more important furniture dimensions. Additionally, it also presents a better cumulative fit than Stature. In conclusion, it seems that Popliteal Height can be the most accurate anthropometric measure for classroom furniture selection purposes. Copyright © 2014 Elsevier Ltd and The Ergonomics Society. All rights reserved.
Quantifying pediatric neuro-oncology risk factors: development of the neurological predictor scale.
Micklewright, Jackie L; King, Tricia Z; Morris, Robin D; Krawiecki, Nicolas
2008-04-01
Pediatric neuro-oncology researchers face methodological challenges associated with quantifying the influence of tumor and treatment-related risk factors on child outcomes. The Neurological Predictor Scale was developed to serve as a cumulative index of a child's exposure to risk factors. The clinical utility of the Neurological Predictor Scale was explored in a sample of 25 children with heterogeneous brain tumors. Consistent with expectation, a series of regression analyses demonstrated that the Neurological Predictor Scale significantly predicted composite intellectual functioning (r(2) = 0.21, p < .05), short-term memory (r(2) = 0.16, p = .05), and abstract visual reasoning abilities (r(2) = 0.28, p < .05). With the exception of chemotherapy, the Neurological Predictor Scale accounted for a significant amount of the variance in child intellectual functioning above and beyond individually examined variables. The Neurological Predictor Scale can be used to quickly quantify the cumulative risk factors associated with pediatric brain tumor diagnoses.
Trethowan, W N; Burge, P S; Rossiter, C E; Harrington, J M; Calvert, I A
1995-01-01
OBJECTIVES--To study the relation between occupational exposure to ceramic fibres during manufacture and respiratory health. METHODS--The respiratory health of 628 current employees in the manufacture of ceramic fibres in seven European plants in three countries was studied with a respiratory questionnaire, lung function tests, and chest radiography. Simultaneous plant hygiene surveys measured subjects' current exposure to airborne ceramic fibres from personal samples with optical microscopy fibre counts. The measured exposures were combined with occupational histories to derive estimates of each subject's cumulative exposure to respirable fibres. Symptoms were related to current and cumulative exposure to ceramic fibres and lung function and findings from chest radiographs were related to cumulative exposure. RESULTS--The mean duration of employment was 10.2 years and mean (range) cumulative exposure was 3.84 (0-22.94) (f.ml-1.y). Eye and skin symptoms were frequent in all plants and increased significantly, as did breathlessness and wheeze, with increasing current exposure. Dry cough and stuffy nose were less common in the least exposed group but did not increase with increasing exposure. After adjustment for the effects of age, sex, height, smoking, and past occupational exposures to respiratory hazards, there was a significant decrease in both forced expiratory volume in one second (FEV1) and forced midexpiratory flow related to cumulative exposure in current smokers (P < 0.05) and in FEV1 in ex-smokers (P < 0.05). Small opacities were found in 13% of the chest radiographs; their prevalence was not related to cumulative exposure to ceramic fibres. CONCLUSIONS--It is concluded that exposure to ceramic fibres is associated with irritant symptoms similar to those seen in other exposures to man made mineral fibres (MMMFs) and that cumulative exposure to respirable ceramic fibres may cause airways obstruction by promoting the effects of cigarette smoke. PMID:7757174
Trethowan, W N; Burge, P S; Rossiter, C E; Harrington, J M; Calvert, I A
1995-02-01
To study the relation between occupational exposure to ceramic fibres during manufacture and respiratory health. The respiratory health of 628 current employees in the manufacture of ceramic fibres in seven European plants in three countries was studied with a respiratory questionnaire, lung function tests, and chest radiography. Simultaneous plant hygiene surveys measured subjects' current exposure to airborne ceramic fibres from personal samples with optical microscopy fibre counts. The measured exposures were combined with occupational histories to derive estimates of each subject's cumulative exposure to respirable fibres. Symptoms were related to current and cumulative exposure to ceramic fibres and lung function and findings from chest radiographs were related to cumulative exposure. The mean duration of employment was 10.2 years and mean (range) cumulative exposure was 3.84 (0-22.94) (f.ml-1.y). Eye and skin symptoms were frequent in all plants and increased significantly, as did breathlessness and wheeze, with increasing current exposure. Dry cough and stuffy nose were less common in the least exposed group but did not increase with increasing exposure. After adjustment for the effects of age, sex, height, smoking, and past occupational exposures to respiratory hazards, there was a significant decrease in both forced expiratory volume in one second (FEV1) and forced midexpiratory flow related to cumulative exposure in current smokers (P < 0.05) and in FEV1 in ex-smokers (P < 0.05). Small opacities were found in 13% of the chest radiographs; their prevalence was not related to cumulative exposure to ceramic fibres. It is concluded that exposure to ceramic fibres is associated with irritant symptoms similar to those seen in other exposures to man made mineral fibres (MMMFs) and that cumulative exposure to respirable ceramic fibres may cause airways obstruction by promoting the effects of cigarette smoke.
Occultation Experiment: Results of the First Direct Measurement of Mars's Atmosphere and Ionosphere.
Kliore, A; Cain, D L; Levy, G S; Eshleman, V R; Fjeldbo, G; Drake, F D
1965-09-10
Changes in the frequency, phase, and amplitude of the Mariner IV radio signal, caused by passage through the atmosphere and ionosphere of Mars, were observed immediately before and after occultation by the planet. Preliminary analysis of these effects has yielded estimates of the refractivity and density of the atmosphere near the surface, the scale height in the atmosphere, and the electron density profile of the Martian ionosphere. The atmospheric density, temperature, and scale height are lower than previously predicted, as are the maximum density, temperature, scale height, and altitude of the ionosphere.
Morphological response of coastal dunes to a group of three typhoons on Pingtan Island, China
NASA Astrophysics Data System (ADS)
Yang, Lin; Dong, Yuxiang; Huang, Dequan
2018-06-01
Pingtan Island (Fujian, China) was severely impacted by a group of three typhoons in a sequence of Nepartak, Meranti, and Megi during the summer of 2016. Field investigations were conducted on the island before and after the typhoons using high-precision RTK GPS technology and surveying methods, and we analyzed the morphological responses of three types of coastal dunes (coastal foredunes, climbing dunes, and coastal sand sheets) to the typhoon group. The maximum height decrease among coastal foredunes was 2.89 m after the typhoon group landed; dune volume increased by 0.9%, and the windward side showed a slight height increase, whereas that of the slope crest and leeward slope were slightly lower than the values before the typhoon group landed. The maximum height decrease among climbing dunes was 1.43 m, and dune volume decreased slightly by 0.1%; the height change among climbing dunes differed in magnitude between sites. Among coastal sand sheets, the maximum height increase was 0.75 m, and dune volume increased by 1.5%; the height of frontal coastal sand sheets increased markedly as result of storm surge washover deposits, whereas the heights barely changed at the middle and trailing edges. The above results suggest that the typhoon group imposed significant morphological changes on coastal dunes. However, the features of morphological responses differed between the three types of coastal dunes studied, and also among dunes of the same type based on local characteristics. Furthermore, coastal dunes showed no cumulative effects in their responses to the typhoon group, despite the individual typhoon impacts on coastal dune morphology.
NASA Technical Reports Server (NTRS)
Gwenzi, David; Lefsky, Michael A.; Suchdeo, Vijay P.; Harding, David J.
2016-01-01
The next planned spaceborne lidar mission is the Ice, Cloud and land Elevation Satellite 2 (ICESat-2), which will use the Advanced Topographic Laser Altimeter System (ATLAS) sensor, a photon counting technique. To pre-validate the capability of this mission for studying three dimensional vegetation structure in savannas, we assessed the potential of the measurement approach to estimate canopy height in an oak savanna landscape. We used data from the Multiple Altimeter Beam Experimental Lidar (MABEL), an airborne photon counting lidar sensor developed by NASA's Goddard Space Flight Center. ATLAS-like data was generated using the MATLAS simulator, which adjusts MABEL data's detected number of signal and noise photons to that expected from the ATLAS instrument. Transects flown over the Tejon ranch conservancy in Kern County, California, USA were used for this work. For each transect we chose to use data from the near infrared channel that had the highest number of photons. We segmented each transect into 50 m, 25 m and 14 m long blocks and aggregated the photons in each block into a histogram based on their elevation values. We then used an automated algorithm to identify cut off points where the cumulative density of photons from the highest elevation indicates the presence of the canopy top and likewise where such cumulative density from the lowest elevation indicates the mean terrain elevation. MABEL derived height metrics were moderately correlated to discrete return lidar (DRL) derived height metrics r(sub 2) and RMSE values ranging from 0.60 to 0.73 and 2.9 m to 4.4 m respectively) but MATLAS simulation resulted in more modest correlations with DRL indices r(sub 2) ranging from 0.5 to 0.64 and RMSE from 3.6 m to 4.6 m). Simulations also indicated that the expected number of signal photons from ATLAS will be substantially lower, a situation that reduces canopy height estimation precision especially in areas of low density vegetation cover. On the basis of the simulated data, there is reason to believe that the ability of ICESat-2 to estimate height in savannas will be comparable to the original ICESat mission although the respective sensors have different measurement principles.
A model of the 8-25 micron point source infrared sky
NASA Technical Reports Server (NTRS)
Wainscoat, Richard J.; Cohen, Martin; Volk, Kevin; Walker, Helen J.; Schwartz, Deborah E.
1992-01-01
We present a detailed model for the IR point-source sky that comprises geometrically and physically realistic representations of the Galactic disk, bulge, stellar halo, spiral arms (including the 'local arm'), molecular ring, and the extragalactic sky. We represent each of the distinct Galactic components by up to 87 types of Galactic source, each fully characterized by scale heights, space densities, and absolute magnitudes at BVJHK, 12, and 25 microns. The model is guided by a parallel Monte Carlo simulation of the Galaxy at 12 microns. The content of our Galactic source table constitutes a good match to the 12 micron luminosity function in the simulation, as well as to the luminosity functions at V and K. We are able to produce differential and cumulative IR source counts for any bandpass lying fully within the IRAS Low-Resolution Spectrometer's range (7.7-22.7 microns as well as for the IRAS 12 and 25 micron bands. These source counts match the IRAS observations well. The model can be used to predict the character of the point source sky expected for observations from IR space experiments.
NASA Technical Reports Server (NTRS)
Choudhury, B. J.; Idso, S. B.; Reginato, R. J.
1986-01-01
Accurate estimates of evaporation over field-scale or larger areas are needed in hydrologic studies, irrigation scheduling, and meteorology. Remotely sensed surface temperature might be used in a model to calculate evaporation. A resistance-energy balance model, which combines an energy balance equation, the Penman-Monteith (1981) evaporation equation, and van den Honert's (1948) equation for water extraction by plant roots, is analyzed for estimating daily evaporation from wheat using postnoon canopy temperature measurements. Additional data requirements are half-hourly averages of solar radiation, air and dew point temperatures, and wind speed, along with reasonable estimates of canopy emissivity, albedo, height, and leaf area index. Evaporation fluxes were measured in the field by precision weighing lysimeters for well-watered and water-stressed wheat. Errors in computed daily evaporation were generally less than 10 percent, while errors in cumulative evaporation for 10 clear sky days were less than 5 percent for both well-watered and water-stressed wheat. Some results from sensitivity analysis of the model are also given.
Bas-relief generation using adaptive histogram equalization.
Sun, Xianfang; Rosin, Paul L; Martin, Ralph R; Langbein, Frank C
2009-01-01
An algorithm is presented to automatically generate bas-reliefs based on adaptive histogram equalization (AHE), starting from an input height field. A mesh model may alternatively be provided, in which case a height field is first created via orthogonal or perspective projection. The height field is regularly gridded and treated as an image, enabling a modified AHE method to be used to generate a bas-relief with a user-chosen height range. We modify the original image-contrast-enhancement AHE method to use gradient weights also to enhance the shape features of the bas-relief. To effectively compress the height field, we limit the height-dependent scaling factors used to compute relative height variations in the output from height variations in the input; this prevents any height differences from having too great effect. Results of AHE over different neighborhood sizes are averaged to preserve information at different scales in the resulting bas-relief. Compared to previous approaches, the proposed algorithm is simple and yet largely preserves original shape features. Experiments show that our results are, in general, comparable to and in some cases better than the best previously published methods.
Timing of mantle overturn during magma ocean solidification
NASA Astrophysics Data System (ADS)
Boukaré, C.-E.; Parmentier, E. M.; Parman, S. W.
2018-06-01
Solidification of magma oceans (MOs) formed early in the evolution of planetary bodies sets the initial condition for their evolution on much longer time scales. Ideal fractional crystallization would generate an unstable chemical stratification that subsequently overturns to form a stably stratified mantle. The simplest model of overturn assumes that cumulates remain immobile until the end of MO solidification. However, overturning of cumulates and thermal convection during solidification may act to reduce this stratification and introduce chemical heterogeneity on scales smaller than the MO thickness. We explore overturning of cumulates before the end of MO crystallization and the possible consequences for mantle structure and composition. In this model, increasingly dense iron-rich layers, crystallized from the overlying residual liquid MO, are deposited on a thickening cumulate layer. Overturn during solidification occurs if the dimensionless parameter, Rc, measuring the ratio of the MO time of crystallization τMO to the timescale associated with compositional overturn τov = μ / ΔρgH exceeds a threshold value. If overturn did not occur until after solidification, this implies that the viscosity of the solidified mantle must have been sufficiently high (possibly requiring efficient melt extraction from the cumulate) for a given rate of solidification. For the lunar MO, possible implications for the generation of the Mg-suites and mare basalt are suggested.
Interpreting Observations of Large-Scale Traveling Ionospheric Disturbances by Ionospheric Sounders
NASA Astrophysics Data System (ADS)
Pederick, L. H.; Cervera, M. A.; Harris, T. J.
2017-12-01
From July to October 2015, the Australian Defence Science and Technology Group conducted an experiment during which a vertical incidence sounder (VIS) was set up at Alice Springs Airport. During September 2015 this VIS observed the passage of many large-scale traveling ionospheric disturbances (TIDs). By plotting the measured virtual heights across multiple frequencies as a function of time, the passage of the TID can be clearly displayed. Using this plotting method, we show that all the TIDs observed during the campaign by the VIS at Alice Springs show an apparent downward phase progression of the crests and troughs. The passage of the TID can be more clearly interpreted by plotting the true height of iso-ionic contours across multiple plasma frequencies; the true heights can be obtained by inverting each ionogram to obtain an electron density profile. These plots can be used to measure the vertical phase speed of a TID and also reveal a time lag between events seen in true height compared to virtual height. To the best of our knowledge, this style of analysis has not previously been applied to other swept-frequency sounder observations. We develop a simple model to investigate the effect of the passage of a large-scale TID on a VIS. The model confirms that for a TID with a downward vertical phase progression, the crests and troughs will appear earlier in virtual height than in true height and will have a smaller apparent speed in true height than in virtual height.
Cheung, Yin Bun
2014-01-01
"A Body Shape Index" (ABSI) is a recently proposed index that standardizes waist circumference for body mass index (BMI) and height. This study aims to: (a) examine if the ABSI scaling exponents for standardizing waist circumference for BMI and height are valid in middle-aged and older Indonesian population, and (b) compare the association between incident hypertension and ABSI and other anthropometric measures. The Indonesian Family Life Survey Wave 3 measured anthropometric variables and blood pressure of 8255 adults aged between 40 to 85 years in 2000. The relationship between two anthropometric quantities, e.g. weight (w) and height (h), can be expressed as the power law-equivalent [Formula: see text], where p = 2 is the scaling exponent in the derivation of the BMI and can be estimated by linear regression analysis. This was extended to the regression analysis of the log-transformed waist circumference, weight and height to establish the scaling exponents in the ABSI. The values for men were similar to those developed by the previous American study, which were 2/3 (BMI) and 1/2 (height). Those for women were somewhat smaller, at 3/5 (BMI) and 1/5 (height). The original (American) ABSI leads to mild negative correlation with BMI (-0.14) and height (-0.12) in the female population. Analysis of the development of hypertension between Waves 3 and 4 (average interval 7.5 years) in relation to ABSI measured at Wave 3 showed stronger association if the locally derived (Indonesian) scaling exponents were used. However, both versions of the ABSI were less associated with incident hypertension than waist circumference and BMI. The values for the scaling exponents for ABSI are roughly similar between the American population and the middle-aged and older Indonesian population, although larger discrepancy was found in women. The ABSI is less associated with incident hypertension than waist circumference and BMI.
Afshari, Davood; Motamedzade, Majid; Salehi, Reza; Soltanian, Alir Raze
2015-01-01
Work-related musculoskeletal disorders of back among weavers are prevalent. Epidemiological studies have shown an association between poor working postures and back disorders among carpet weavers. Therefore, the present study aimed to evaluate the impact of the traditional (A) and ergonomically designed (B) workstations on trunk posture and cumulative compression load in carpet weavers. In this study, subtasks were identified in terms of stressful postures and carpet weaving process. Postural data were collected during knotting and compacting subtasks using inclinometer during four hours for each workstation. Postural data, weight and height of the weavers were entered into the University of Michigan three-dimensional static biomechanical model for estimation of the compression load and cumulative load were estimated from the resultant load and exposure time. Thirteen healthy carpet weavers (four males and nine females) participated in the study. Median trunk flexion angle was reduced with workstation B during knotting subtask (18° versus 8.5°, p< 0.01 in males; 18.5° versus 7°, p< 0.001 in females). Average cumulative compression load was reduced with workstation B (22.17MN-s versus 16.68MN-s, p < 0.01 in males; 13.05 MN-s versus 10.14, p < 0.001 in females). Using workstation B led to significant decrease in cumulative compressive loading during an entire shift (8 hours), which indicates reduced level of stress on the back. It is suggested to conduct biomechanical studies on the shoulder and wrist regions in carpet weavers in order to achieve further development and improvement in the ergonomically designed workstation.
Chuo, Yu-Jung
2014-01-01
Scale height is an important parameter in characterizing the shape of the ionosphere and its physical processes. In this study, we attempt to examine and discuss the variation of scale height, H m, around the F-layer peak height during high solar activity at the northern crest of the equatorial ionization anomaly (EIA) region. H m exhibits day-to-day variation and seasonal variation, with a greater average daily variation during daytime in summer. Furthermore, the diurnal variation of H m exhibits an abnormal peak at presunrise during all the seasons, particularly in winter. This increase is also observed in the F2-layer peak height for the same duration with an upward movement associated with thermospheric wind toward the equator; this upward movement increases the N2/O ratio and H m, but it causes a decrease in the F2-layer maximum critical frequency during the presunrise period. PMID:25162048
DBH Prediction Using Allometry Described by Bivariate Copula Distribution
NASA Astrophysics Data System (ADS)
Xu, Q.; Hou, Z.; Li, B.; Greenberg, J. A.
2017-12-01
Forest biomass mapping based on single tree detection from the airborne laser scanning (ALS) usually depends on an allometric equation that relates diameter at breast height (DBH) with per-tree aboveground biomass. The incapability of the ALS technology in directly measuring DBH leads to the need to predict DBH with other ALS-measured tree-level structural parameters. A copula-based method is proposed in the study to predict DBH with the ALS-measured tree height and crown diameter using a dataset measured in the Lassen National Forest in California. Instead of exploring an explicit mathematical equation that explains the underlying relationship between DBH and other structural parameters, the copula-based prediction method utilizes the dependency between cumulative distributions of these variables, and solves the DBH based on an assumption that for a single tree, the cumulative probability of each structural parameter is identical. Results show that compared with the bench-marking least-square linear regression and the k-MSN imputation, the copula-based method obtains better accuracy in the DBH for the Lassen National Forest. To assess the generalization of the proposed method, prediction uncertainty is quantified using bootstrapping techniques that examine the variability of the RMSE of the predicted DBH. We find that the copula distribution is reliable in describing the allometric relationship between tree-level structural parameters, and it contributes to the reduction of prediction uncertainty.
NASA Astrophysics Data System (ADS)
Lee, K.; Imada, S.; Moon, Y.; Lee, J.
2013-12-01
We investigate spectral properties of a cool loop and a dark lane over a limb active region on 2007 March 14 by the Hinode/EUV Imaging Spectrometer. The cool loop is clearly seen in the spectral lines formed at the transition region temperature. The dark lane is characterized by an elongated faint structure in coronal spectral lines and rooted on a bright point. We determine their electron densities, Doppler velocities, and non-thermal velocities with height over the limb. We derived electron densities using the density sensitive line pairs of Mg VII, Si X, Fe XII, Fe XIII and Fe XIV spectra. Under the hydrostatic equilibrium and isothermal assumption, we determine their temperatures from the density scale height. Comparing the scale height temperatures to the peak formation temperatures of the spectral lines, we note that the scale height temperature of the cool loop is consistent with a peak formation temperature of the Fe XII and the scale height temperatures of the dark lane from each spectral lines are much lower than their peak formation temperatures. The non-thermal velocity in the cool loop slightly decreases along the loop while that in the dark lane sharply falls off with height. The variation of non-thermal velocity with height in the cool loop and the dark lane is contrast to that in off-limb polar coronal holes which are considered as source of the solar wind. Such a decrease in the non-thermal velocity may be explained by wave damping near the solar surface or turbulence due to magnetic reconnection near the bright point.
Vertical Structure of NGC 4631
NASA Astrophysics Data System (ADS)
Ann, Hong Bae; Seo, Mira Seo; Baek, Su-Ja
2011-02-01
We present a deep CCD imaging in B and V bands which allows us to analyze the vertical structure of NGC 4631. We derive the scale heights of the thin and thick disks at a variety of positions along the major axis of the disk. The scale heights of the thin disk are nearly constant while those of the thick disk tend to increase with increasing galactocentric distance. The mean scale heights of the thin disk derived from B and V images are similar to each other (˜450 pc). Instead, those of the thick disk show a strong east-west asymmetry which is caused by the diffuse stellar emission that is most prominent in the north west regions above the disk plane. The ratio of scale heights (z_{thick}/z_{thin}) is about 2.5 in the east side of the disk. However, this ratio is greater than 4 for the thick disk above the disk plane in the west side of the galaxy.
NASA Astrophysics Data System (ADS)
Ardhuin, Fabrice; Gille, Sarah; Menemenlis, Dimitris; Rocha, Cesar; Rascle, Nicolas; Gula, Jonathan; Chapron, Bertrand
2017-04-01
Tidal currents and large oceanic currents, such as the Agulhas, Gulf Stream and Kuroshio, are known to modify ocean wave properties, causing extreme sea states that are a hazard to navigation. Recent advances in the understanding and modeling capability of ocean currents at scales of 10 km or less have revealed the ubiquitous presence of fronts and filaments. Based on realistic numerical models, we show that these structures can be the main source of variability in significant wave heights at scales less than 200 km, including important variations at 10 km. This current-induced variability creates gradients in wave heights that were previously overlooked and are relevant for extreme wave heights and remote sensing. The spectrum of significant wave heights is found to be of the order of 70⟨Hs ⟩2/(g2⟨Tm0,-1⟩2) times the current spectrum, where ⟨Hs ⟩ is the spatially-averaged significant wave height, ⟨Tm0,-1⟩ is the average energy period, and g is the gravity acceleration. This small scale variability is consistent with Jason-3 and SARAL along-track variability. We will discuss how future satellite mission with wave spectrometers can help observe these wave-current interactions. CFOSAT is due for launch in 2018, and SKIM is a proposal for ESA Earth Explorer 9.
Mokken scaling of the Myocardial Infarction Dimensional Assessment Scale (MIDAS).
Thompson, David R; Watson, Roger
2011-02-01
The purpose of this study was to examine the hierarchical and cumulative nature of the 35 items of the Myocardial Infarction Dimensional Assessment Scale (MIDAS), a disease-specific health-related quality of life measure. Data from 668 participants who completed the MIDAS were analysed using the Mokken Scaling Procedure, which is a computer program that searches polychotomous data for hierarchical and cumulative scales on the basis of a range of diagnostic criteria. Fourteen MIDAS items were retained in a Mokken scale and these items included physical activity, insecurity, emotional reaction and dependency items but excluded items related to diet, medication or side-effects. Item difficulty, in item response theory terms, ran from physical activity items (low difficulty) to insecurity, suggesting that the most severe quality of life effect of myocardial infarction is loneliness and isolation. Items from the MIDAS form a strong and reliable Mokken scale, which provides new insight into the relationship between items in the MIDAS and the measurement of quality of life after myocardial infarction. © 2010 Blackwell Publishing Ltd.
NASA Technical Reports Server (NTRS)
Knox, Robert G.; Blair, J. Bryan; Schwarz, Paul A.; Hofton, Michelle A.; Dubayah, Ralph; Smith, David E. (Technical Monitor)
2000-01-01
On September 26, 1999, we mapped canopy structure over 90% of the Hubbard Brook Experimental Forest in White Mountain National Forest, New Hampshire, using the Laser Vegetation Imaging Sensor (LVIS). This airborne instrument was configured to emulate data expected from the Vegetation Canopy Lidar (VCL) space mission. We compared above ground heights of the tallest surfaces detected by lidar with average forest canopy heights estimated from tree-based measurements in or near 346 0.05 ha plots (made in autumn of 1997 and 1998). Vegetation heights had by far the predominant influence on lidar top heights, but with this large data set we were able to measure two significant secondary effects: those of steepness or slope of the underlying terrain and of tree crown form. The size of the slope effect was intermediate between that expected from models of homogeneous canopy layers and for solitary tree crowns. The first detected surfaces were also proportionately taller for plots with more basal area in broad leaved northern hardwoods than for mostly coniferous plots. We expected this because of the contrast between the shapes of cumulative distributions of surface area for elliptical or hemi-elliptical tree crowns and those for conical crowns. Correcting for these secondary effects, when appropriate data are available for calibration, may improve vegetation structure estimates in regional studies using VCL or similar lidar data sources.
Effects of Density Stratification in Compressible Polytropic Convection
NASA Astrophysics Data System (ADS)
Manduca, Cathryn M.; Anders, Evan H.; Bordwell, Baylee; Brown, Benjamin P.; Burns, Keaton J.; Lecoanet, Daniel; Oishi, Jeffrey S.; Vasil, Geoffrey M.
2017-11-01
We study compressible convection in polytropically-stratified atmospheres, exploring the effect of varying the total density stratification. Using the Dedalus pseudospectral framework, we perform 2D and 3D simulations. In these experiments we vary the number of density scale heights, studying atmospheres with little stratification (1 density scale height) and significant stratification (5 density scale heights). We vary the level of convective driving (quantified by the Rayleigh number), and study flows at similar Mach numbers by fixing the initial superadiabaticity. We explore the differences between 2D and 3D simulations, and in particular study the equilibration between different reservoirs of energy (kinetic, potential and internal) in the evolved states.
Cumulative assessments consider a range of potential stressors that might impact the health of a receptor, such as a local neighborhood or wetland area. When receptors are located near pollution sources such as highways or ports (within 500-1,000 m), then they could be at risk of...
Dynamics of behavioral organization and its alteration in major depression
NASA Astrophysics Data System (ADS)
Nakamura, Toru; Kiyono, Ken; Yoshiuchi, Kazuhiro; Nakahara, Rika; Struzik, Zbigniew R.; Yamamoto, Yoshiharu
2007-07-01
We describe the nature of human behavioral organization, specifically how resting and active periods are interwoven throughout daily life. Active period durations with physical activity counts successively above a predefined threshold follow a stretched exponential (gamma-type) cumulative distribution with characteristic time, both in healthy individuals and in patients with major depressive disorder. On the contrary, resting period durations below the threshold for both groups obey a scale free power law cumulative distribution over two decades, with significantly lower scaling exponents in the patients. We thus find underlying robust laws governing human behavioral organization, with a parameter altered in depression.
Spatial and Temporal scales of time-averaged 700 MB height anomalies
NASA Technical Reports Server (NTRS)
Gutzler, D.
1981-01-01
The monthly and seasonal forecasting technique is based to a large extent on the extrapolation of trends in the positions of the centers of time averaged geopotential height anomalies. The complete forecasted height pattern is subsequently drawn around the forecasted anomaly centers. The efficacy of this technique was tested and time series of observed monthly mean and 5 day mean 700 mb geopotential heights were examined. Autocorrelation statistics are generated to document the tendency for persistence of anomalies. These statistics are compared to a red noise hypothesis to check for evidence of possible preferred time scales of persistence. Space-time spectral analyses at middle latitudes are checked for evidence of periodicities which could be associated with predictable month-to-month trends. A local measure of the average spatial scale of anomalies is devised for guidance in the completion of the anomaly pattern around the forecasted centers.
Gillan, Jeffrey K; Karl, Jason W; Duniway, Michael; Elaksher, Ahmed
2014-11-01
Vertical vegetation structure in rangeland ecosystems can be a valuable indicator for assessing rangeland health and monitoring riparian areas, post-fire recovery, available forage for livestock, and wildlife habitat. Federal land management agencies are directed to monitor and manage rangelands at landscapes scales, but traditional field methods for measuring vegetation heights are often too costly and time consuming to apply at these broad scales. Most emerging remote sensing techniques capable of measuring surface and vegetation height (e.g., LiDAR or synthetic aperture radar) are often too expensive, and require specialized sensors. An alternative remote sensing approach that is potentially more practical for managers is to measure vegetation heights from digital stereo aerial photographs. As aerial photography is already commonly used for rangeland monitoring, acquiring it in stereo enables three-dimensional modeling and estimation of vegetation height. The purpose of this study was to test the feasibility and accuracy of estimating shrub heights from high-resolution (HR, 3-cm ground sampling distance) digital stereo-pair aerial images. Overlapping HR imagery was taken in March 2009 near Lake Mead, Nevada and 5-cm resolution digital surface models (DSMs) were created by photogrammetric methods (aerial triangulation, digital image matching) for twenty-six test plots. We compared the heights of individual shrubs and plot averages derived from the DSMs to field measurements. We found strong positive correlations between field and image measurements for several metrics. Individual shrub heights tended to be underestimated in the imagery, however, accuracy was higher for dense, compact shrubs compared with shrubs with thin branches. Plot averages of shrub height from DSMs were also strongly correlated to field measurements but consistently underestimated. Grasses and forbs were generally too small to be detected with the resolution of the DSMs. Estimates of vertical structure will be more accurate in plots having low herbaceous cover and high amounts of dense shrubs. Through the use of statistically derived correction factors or choosing field methods that better correlate with the imagery, vegetation heights from HR DSMs could be a valuable technique for broad-scale rangeland monitoring needs. Copyright © 2014 Elsevier Ltd. All rights reserved.
Gillan, Jeffrey K.; Karl, Jason W.; Duniway, Michael; Elaksher, Ahmed
2014-01-01
Vertical vegetation structure in rangeland ecosystems can be a valuable indicator for assessing rangeland health and monitoring riparian areas, post-fire recovery, available forage for livestock, and wildlife habitat. Federal land management agencies are directed to monitor and manage rangelands at landscapes scales, but traditional field methods for measuring vegetation heights are often too costly and time consuming to apply at these broad scales. Most emerging remote sensing techniques capable of measuring surface and vegetation height (e.g., LiDAR or synthetic aperture radar) are often too expensive, and require specialized sensors. An alternative remote sensing approach that is potentially more practical for managers is to measure vegetation heights from digital stereo aerial photographs. As aerial photography is already commonly used for rangeland monitoring, acquiring it in stereo enables three-dimensional modeling and estimation of vegetation height. The purpose of this study was to test the feasibility and accuracy of estimating shrub heights from high-resolution (HR, 3-cm ground sampling distance) digital stereo-pair aerial images. Overlapping HR imagery was taken in March 2009 near Lake Mead, Nevada and 5-cm resolution digital surface models (DSMs) were created by photogrammetric methods (aerial triangulation, digital image matching) for twenty-six test plots. We compared the heights of individual shrubs and plot averages derived from the DSMs to field measurements. We found strong positive correlations between field and image measurements for several metrics. Individual shrub heights tended to be underestimated in the imagery, however, accuracy was higher for dense, compact shrubs compared with shrubs with thin branches. Plot averages of shrub height from DSMs were also strongly correlated to field measurements but consistently underestimated. Grasses and forbs were generally too small to be detected with the resolution of the DSMs. Estimates of vertical structure will be more accurate in plots having low herbaceous cover and high amounts of dense shrubs. Through the use of statistically derived correction factors or choosing field methods that better correlate with the imagery, vegetation heights from HR DSMs could be a valuable technique for broad-scale rangeland monitoring needs.
The challenges and opportunities in cumulative effects assessment
Foley, Melissa M.; Mease, Lindley A; Martone, Rebecca G; Prahler, Erin E; Morrison, Tiffany H; Clarke Murray, Cathryn; Wojcik, Deborah
2016-01-01
The cumulative effects of increasing human use of the ocean and coastal zone have contributed to a rapid decline in ocean and coastal resources. As a result, scientists are investigating how multiple, overlapping stressors accumulate in the environment and impact ecosystems. These investigations are the foundation for the development of new tools that account for and predict cumulative effects in order to more adequately prevent or mitigate negative effects. Despite scientific advances, legal requirements, and management guidance, those who conduct assessments—including resource managers, agency staff, and consultants—continue to struggle to thoroughly evaluate cumulative effects, particularly as part of the environmental assessment process. Even though 45 years have passed since the United States National Environmental Policy Act was enacted, which set a precedent for environmental assessment around the world, defining impacts, baseline, scale, and significance are still major challenges associated with assessing cumulative effects. In addition, we know little about how practitioners tackle these challenges or how assessment aligns with current scientific recommendations. To shed more light on these challenges and gaps, we undertook a comparative study on how cumulative effects assessment (CEA) is conducted by practitioners operating under some of the most well-developed environmental laws around the globe: California, USA; British Columbia, Canada; Queensland, Australia; and New Zealand. We found that practitioners used a broad and varied definition of impact for CEA, which led to differences in how baseline, scale, and significance were determined. We also found that practice and science are not closely aligned and, as such, we highlight opportunities for managers, policy makers, practitioners, and scientists to improve environmental assessment.
Evidence-based evaluation of the cumulative effects of ecosystem restoration
DOE Office of Scientific and Technical Information (OSTI.GOV)
Diefenderfer, Heida L.; Johnson, Gary E.; Thom, Ronald M.
Evaluating the cumulative effects of large-scale ecological restoration programs is necessary to inform adaptive ecosystem management and provide society with resilient and sustainable services. However, complex linkages between restorative actions and ecosystem responses make evaluations problematic. Despite long-term federal investments in restoring aquatic ecosystems, no standard evaluation method has been adopted and most programs focus on monitoring and analysis, not synthesis and evaluation. In this paper, we demonstrate a new transdisciplinary approach integrating techniques from evidence-based medicine, critical thinking, and cumulative effects assessment. Tiered hypotheses are identified using an ecosystem conceptual model. The systematic literature review at the core ofmore » evidence-based assessment becomes one of many lines of evidence assessed collectively, using critical thinking strategies and causal criteria from a cumulative effects perspective. As a demonstration, we analyzed data from 166 locations on the Columbia River and estuary representing 12 indicators of habitat and fish response to floodplain restoration actions intended to benefit threatened and endangered salmon. Synthesis of seven lines of evidence showed that hydrologic reconnection promoted macrodetritis export, prey availability, and fish access and feeding. The evidence was sufficient to infer cross-boundary, indirect, compounding and delayed cumulative effects, and suggestive of nonlinear, landscape-scale, and spatial density effects. On the basis of causal inferences regarding food web functions, we concluded that the restoration program has a cumulative beneficial effect on juvenile salmon. As a result, this evidence-based approach will enable the evaluation of restoration in complex coastal and riverine ecosystems where data have accumulated without sufficient synthesis.« less
The challenges and opportunities in cumulative effects assessment
DOE Office of Scientific and Technical Information (OSTI.GOV)
Foley, Melissa M., E-mail: mfoley@usgs.gov; Center for Ocean Solutions, Stanford University, 99 Pacific St., Monterey, CA 93940; Mease, Lindley A., E-mail: lamease@stanford.edu
The cumulative effects of increasing human use of the ocean and coastal zone have contributed to a rapid decline in ocean and coastal resources. As a result, scientists are investigating how multiple, overlapping stressors accumulate in the environment and impact ecosystems. These investigations are the foundation for the development of new tools that account for and predict cumulative effects in order to more adequately prevent or mitigate negative effects. Despite scientific advances, legal requirements, and management guidance, those who conduct assessments—including resource managers, agency staff, and consultants—continue to struggle to thoroughly evaluate cumulative effects, particularly as part of the environmentalmore » assessment process. Even though 45 years have passed since the United States National Environmental Policy Act was enacted, which set a precedent for environmental assessment around the world, defining impacts, baseline, scale, and significance are still major challenges associated with assessing cumulative effects. In addition, we know little about how practitioners tackle these challenges or how assessment aligns with current scientific recommendations. To shed more light on these challenges and gaps, we undertook a comparative study on how cumulative effects assessment (CEA) is conducted by practitioners operating under some of the most well-developed environmental laws around the globe: California, USA; British Columbia, Canada; Queensland, Australia; and New Zealand. We found that practitioners used a broad and varied definition of impact for CEA, which led to differences in how baseline, scale, and significance were determined. We also found that practice and science are not closely aligned and, as such, we highlight opportunities for managers, policy makers, practitioners, and scientists to improve environmental assessment.« less
Evidence-based evaluation of the cumulative effects of ecosystem restoration
Diefenderfer, Heida L.; Johnson, Gary E.; Thom, Ronald M.; ...
2016-03-18
Evaluating the cumulative effects of large-scale ecological restoration programs is necessary to inform adaptive ecosystem management and provide society with resilient and sustainable services. However, complex linkages between restorative actions and ecosystem responses make evaluations problematic. Despite long-term federal investments in restoring aquatic ecosystems, no standard evaluation method has been adopted and most programs focus on monitoring and analysis, not synthesis and evaluation. In this paper, we demonstrate a new transdisciplinary approach integrating techniques from evidence-based medicine, critical thinking, and cumulative effects assessment. Tiered hypotheses are identified using an ecosystem conceptual model. The systematic literature review at the core ofmore » evidence-based assessment becomes one of many lines of evidence assessed collectively, using critical thinking strategies and causal criteria from a cumulative effects perspective. As a demonstration, we analyzed data from 166 locations on the Columbia River and estuary representing 12 indicators of habitat and fish response to floodplain restoration actions intended to benefit threatened and endangered salmon. Synthesis of seven lines of evidence showed that hydrologic reconnection promoted macrodetritis export, prey availability, and fish access and feeding. The evidence was sufficient to infer cross-boundary, indirect, compounding and delayed cumulative effects, and suggestive of nonlinear, landscape-scale, and spatial density effects. On the basis of causal inferences regarding food web functions, we concluded that the restoration program has a cumulative beneficial effect on juvenile salmon. As a result, this evidence-based approach will enable the evaluation of restoration in complex coastal and riverine ecosystems where data have accumulated without sufficient synthesis.« less
Eight thousand years of economic and political history in Latin America revealed by anthropometry.
Bogin, B; Keep, R
1999-01-01
Human growth in height may be used as a cumulative record of the nutritional and health history of a person or a population, and often reflects the economic, social and political environment in which those people live. This paper explores the relationship between growth in height and the economic, social and political environment in Latin American populations. Adult height is analysed over an 8250 year period. It is shown that economic, social and political change prior to the European conquest of the Americas resulted in positive and negative trends in mean stature. Following the European conquest, there was a decline in mean adult stature in Middle and South America that continued until about 1939. From 1940 to 1989 there was a trend for increasing mean stature. A negative trend in stature for children is found in a second analysis. Economic decline and political unrest in Guatemala since 1978 is associated with a significant decline in the mean stature of 10- and 11-year-old children from families from very high, moderate, and very low socioeconomic status.
Heymsfield, Steven B; Pietrobelli, Angelo
2010-01-01
Mammalian resting energy expenditure (REE) increases as approximately weight(0.75) while mass-specific REE scales as approximately weight(-0.25). Energy needs for replacing resting losses are thus less relative to weight (W) in large compared with small mammals, a classic observation with biological implications. Human weight scales as approximately height(2) and tall adults thus have a greater weight than their short counterparts. However, it remains unknown if mass-specific energy requirements are less in tall adults; allometric models linking total energy expenditure (TEE) and weight with height (H) are lacking. We tested the hypothesis that mass-specific energy requirements scale inversely to height in adults by evaluating TEE (doubly labeled water) data collected by the National Academy of Sciences. Activity energy expenditure (AEE) was calculated from TEE, REE (indirect calorimetry), and estimated diet-induced energy expenditure. Main analyses focused on nonmorbidly obese subjects < or =50 yrs of age with non-negative AEE values (n = 404), although results were directionally similar for all samples. Allometric models, including age as a covariate, revealed significantly (P < 0.05) greater REE, AEE, and TEE as a function of height (range H(1.5-1.7)) in both men and women. TEE/W scaled negatively to height ( approximately H(-0.7), P < 0.01) with predicted mass-specific TEE (kcal/kg/d) at +/-2 SD for US height lower in tall compared with short men (40.3 vs. 46.5) and women (37.7 vs. 42.7). REE/W also scaled negatively to height in men (P < 0.001) and women (P < 0.01). Results were generally robust across several different analytic strategies. These observations reveal previously unforeseen associations between human stature and energy requirements that have implications for modeling efforts and provide new links to mammalian biology as a whole.
Cumulative adversity in childhood and emergent risk factors for long-term health.
Slopen, Natalie; Koenen, Karestan C; Kubzansky, Laura D
2014-03-01
To examine whether and when effects of cumulative adversity in the first 7 years of life are evident in relation to 3 childhood markers of risk for poor adult physical health. The study data are from an English birth cohort. Parental reports of 8 social risk factors were obtained during the child's first 7 years, and scores were created to reflect cumulative adversity at 4 developmental periods. At age 7 and 11 years, weight, height, and blood pressure (BP) were measured by clinic staff, and caregivers reported behavior problems. Linear regression was used to estimate associations of cumulative adversity with each outcome (n = 4361) and changes in these outcomes between 7 and 11 years (n = 3348). At age 7 years, mean adversity and chronic exposure to high adversity were associated with elevated body mass index (BMI) and internalizing and externalizing symptoms (P < .05), but not elevated BP. Adversity in all developmental periods was associated with elevated numbers of internalizing and externalizing symptoms (P < .0001), but associations were less robust for BMI. Adversity did not predict change in BMI or BP between age 7 and 11 years, however, it predicted increases in internalizing and externalizing symptoms (P < .0001). Cumulative adversity was associated with BMI and behavior problems at age 7 years, and our data indicate that timing and chronicity of exposure to adversity differentially influence diverse indicators of long-term health risk commonly measured in childhood. This research suggests the hypothesis that interventions to address adversity could reduce the development of multiple chronic disease risk factors and limit their effects on health. Copyright © 2014 Mosby, Inc. All rights reserved.
The integrity of aquatic ecosystems and habitats at the land-sea interface is challeneged by several forces, ranging from plot scale destruction and disturbance, to watershed scale perturbations, to global changes in climate and human demographis. The scientific challenge is to ...
ERIC Educational Resources Information Center
McGuigan, William M.; Middlemiss, Wendy
2005-01-01
This study investigates the cumulative impact of sexual abuse in childhood and adult interpersonal violence in the past year on depressive symptoms in a nonclinical sample of 265 primarily African American (74%) women. The frequency of depressive symptoms, measured by the Center for Epidemiologic Studies Depression Scale (CES-D), was highest for…
NASA Astrophysics Data System (ADS)
Drobinski, P.; Bastin, S.; Dabas, A.; Delville, P.; Reitebuch, O.
2006-08-01
Sea-breeze dynamics in southern France is investigated using an airborne Doppler lidar, a meteorological surface station network and radiosoundings, in the framework of the ESCOMPTE experiment conducted during summer 2001 in order to evaluate the role of thermal circulations on pollutant transport and ventilation. The airborne Doppler lidar WIND contributed to three-dimensional (3-D) mapping of the sea breeze circulation in an unprecedented way. The data allow access to the onshore and offshore sea breeze extents (xsb), and to the sea breeze depth (zsb) and intensity (usb). They also show that the return flow of the sea breeze circulation is very seldom seen in this area due to (i) the presence of a systematic non zero background wind, and (ii) the 3-D structure of the sea breeze caused by the complex coastline shape and topography. A thorough analysis is conducted on the impact of the two main valleys (Rhône and Durance valleys) affecting the sea breeze circulation in the area.
Finally, this dataset also allows an evaluation of the existing scaling laws used to derive the sea breeze intensity, depth and horizontal extent. The main results of this study are that (i) latitude, cumulative heating and surface friction are key parameters of the sea breeze dynamics; (ii) in presence of strong synoptic flow, all scaling laws fail in predicting the sea breeze characteristics (the sea breeze depth, however being the most accurately predicted); and (iii) the ratio zsb/usb is approximately constant in the sea breeze flow.
NASA Astrophysics Data System (ADS)
Kutiev, Ivan; Marinov, Pencho; Fidanova, Stefka; Belehaki, Anna; Tsagouri, Ioanna
2012-12-01
Validation results on the latest version of TaD model (TaDv2) show realistic reconstruction of the electron density profiles (EDPs) with an average error of 3 TECU, similar to the error obtained from GNSS-TEC calculated paremeters. The work presented here has the aim to further improve the accuracy of the TaD topside reconstruction, adjusting the TEC parameter calculated from TaD model with the TEC parameter calculated by GNSS transmitting RINEX files provided by receivers co-located with the Digisondes. The performance of the new version is tested during a storm period demonstrating further improvements in respect to the previous version. Statistical comparison of modeled and observed TEC confirms the validity of the proposed adjustment. A significant benefit of the proposed upgrade is that it facilitates the real-time implementation of TaD. The model needs a reliable measure of the scale height at the peak height, which is supposed to be provided by Digisondes. Oftenly, the automatic scaling software fails to correctly calculate the scale height at the peak, Hm, due to interferences in the receiving signal. Consequently the model estimated topside scale height is wrongly calculated leading to unrealistic results for the modeled EDP. The proposed TEC adjustment forces the model to correctly reproduce the topside scale height, despite the inaccurate values of Hm. This adjustment is very important for the application of TaD in an operational environment.
NASA Astrophysics Data System (ADS)
Gulyaeva, Tamara; Poustovalova, Ljubov
The International Reference Ionosphere model extended to the plasmasphere, IRI-Plas, has been recently updated for assimilation of total electron content, TEC, derived from observations with Global Navigation Satellite System, GNSS. The ionosonde products of the F2 layer peak density (NmF2) and height (hmF2) ensure true electron density maximum at the F2 peak. The daily solar and magnetic indices used by IRI-Plas code are compiled in data files including the 3-hour ap and kp magnetic index from 1958 onward, 12-monthly smoothed sunspot number R12 and Global Electron Content GEC12, daily solar radio flux F10.7 and daily sunspot number Ri. The 3-h ap-index is available in Real Time, RT, mode from GFZ, Potsdam, Germany, daily update of F10.7 is provided by Space Weather Canada service, and daily estimated international sunspot number Ri is provided by Solar Influences Data Analysis Center, SIDC, Belgium. For IRI-Plas-RT operation in regime of the daily update and prediction of the F2 layer peak parameters, the proxy kp and ap forecast for 3 to 24 hours ahead based on data for preceding 12 hours is applied online at http://www.izmiran.ru/services/iweather/. The topside electron density profile of IRI-Plas code is expressed with complementary half-peak density anchor height above hmF2 which corresponds to transition O+/H+ height. The present investigation is focused on reconstruction of topside ionosphere scale height using vertical total electron content (TEC) data derived from the Global Positioning System GPS observations and the ionosonde derived F2 layer peak parameters from 25 observatories ingested into IRI-Plas model. GPS-TEC and ionosonde measurements at solar maximum (September, 2002, and October, 2003) for quiet, positively disturbed, and negatively disturbed days of the month are used to obtain the topside scale height, Htop, representing the range of altitudes from hmF2 to the height where NmF2 decay by e times occurs. Mapping of the F2 layer peak parameters and TEC allows interpolate these parameters at coordinated grid sites from independent GPS receivers and ionosondes data. Exponential scale height Htop exceeds scale height HT of the α-Chapman layer by 3 times - the latter refers to a narrow altitude range from hmF2 to the height of 1.2 times decay of NmF2. While typical quiet daytime value of the topside scale height is around 200 km, it can be enhanced by 2-3 times during the negative phase of the ionospheric storm as it is captured by IRI-Plas-RT model ingesting the F2 peak and TEC data. This study is supported by the joint grant of RFBR 13-02-91370-CT_a and TUBITAK 112E568.
Spaceborne Potential for Examining Taiga-Tundra Ecotone Form and Vulnerability
NASA Technical Reports Server (NTRS)
Montesano, Paul M.; Sun, Guoqing; Dubayah, Ralph O.; Ranson, K. Jon
2016-01-01
In the taiga-tundra ecotone (TTE), site-dependent forest structure characteristics can influence the subtle and heterogeneous structural changes that occur across the broad circumpolar extent. Such changes may be related to ecotone form, described by the horizontal and vertical patterns of forest structure (e.g., tree cover, density and height) within TTE forest patches, driven by local site conditions, and linked to ecotone dynamics. The unique circumstance of subtle, variable and widespread vegetation change warrants the application of spaceborne data including high-resolution (less than 5m) spaceborne imagery (HRSI) across broad scales for examining TTE form and predicting dynamics. This study analyzes forest structure at the patch-scale in the TTE to provide a means to examine both vertical and horizontal components of ecotone form. We demonstrate the potential of spaceborne data for integrating forest height and density to assess TTE form at the scale of forest patches across the circumpolar biome by (1) mapping forest patches in study sites along the TTE in northern Siberia with a multi-resolution suite of spaceborne data, and (2) examining the uncertainty of forest patch height from this suite of data across sites of primarily diffuse TTE forms. Results demonstrate the opportunities for improving patch-scale spaceborne estimates of forest height, the vertical component of TTE form, with HRSI. The distribution of relative maximum height uncertainty based on prediction intervals is centered at approximately 40%, constraining the use of height for discerning differences in forest patches. We discuss this uncertainty in light of a conceptual model of general ecotone forms, and highlight how the uncertainty of spaceborne estimates of height can contribute to the uncertainty in identifying TTE forms. A focus on reducing the uncertainty of height estimates in forest patches may improve depiction of TTE form, which may help explain variable forest responses in the TTE to climate change and the vulnerability of portions of the TTE to forest structure change. structural changes.
Spaceborne potential for examining taiga-tundra ecotone form and vulnerability
NASA Astrophysics Data System (ADS)
Montesano, Paul M.; Sun, Guoqing; Dubayah, Ralph O.; Ranson, K. Jon
2016-07-01
In the taiga-tundra ecotone (TTE), site-dependent forest structure characteristics can influence the subtle and heterogeneous structural changes that occur across the broad circumpolar extent. Such changes may be related to ecotone form, described by the horizontal and vertical patterns of forest structure (e.g., tree cover, density, and height) within TTE forest patches, driven by local site conditions, and linked to ecotone dynamics. The unique circumstance of subtle, variable, and widespread vegetation change warrants the application of spaceborne data including high-resolution (< 5 m) spaceborne imagery (HRSI) across broad scales for examining TTE form and predicting dynamics. This study analyzes forest structure at the patch scale in the TTE to provide a means to examine both vertical and horizontal components of ecotone form. We demonstrate the potential of spaceborne data for integrating forest height and density to assess TTE form at the scale of forest patches across the circumpolar biome by (1) mapping forest patches in study sites along the TTE in northern Siberia with a multi-resolution suite of spaceborne data and (2) examining the uncertainty of forest patch height from this suite of data across sites of primarily diffuse TTE forms. Results demonstrate the opportunities for improving patch-scale spaceborne estimates of forest height, the vertical component of TTE form, with HRSI. The distribution of relative maximum height uncertainty based on prediction intervals is centered at ˜ 40 %, constraining the use of height for discerning differences in forest patches. We discuss this uncertainty in light of a conceptual model of general ecotone forms and highlight how the uncertainty of spaceborne estimates of height can contribute to the uncertainty in identifying TTE forms. A focus on reducing the uncertainty of height estimates in forest patches may improve depiction of TTE form, which may help explain variable forest responses in the TTE to climate change and the vulnerability of portions of the TTE to forest structure change.
Mathematical model for logarithmic scaling of velocity fluctuations in wall turbulence.
Mouri, Hideaki
2015-12-01
For wall turbulence, moments of velocity fluctuations are known to be logarithmic functions of the height from the wall. This logarithmic scaling is due to the existence of a characteristic velocity and to the nonexistence of any characteristic height in the range of the scaling. By using the mathematics of random variables, we obtain its necessary and sufficient conditions. They are compared with characteristics of a phenomenological model of eddies attached to the wall and also with those of the logarithmic scaling of the mean velocity.
Shuttle program: Computing atmospheric scale height for refraction corrections
NASA Technical Reports Server (NTRS)
Lear, W. M.
1980-01-01
Methods for computing the atmospheric scale height to determine radio wave refraction were investigated for different atmospheres, and different angles of elevation. Tables of refractivity versus altitude are included. The equations used to compute the refraction corrections are given. It is concluded that very accurate corrections are determined with the assumption of an exponential atmosphere.
An empirical InSAR-optical fusion approach to mapping vegetation canopy height
Wayne S. Walker; Josef M. Kellndorfer; Elizabeth LaPoint; Michael Hoppus; James Westfall
2007-01-01
Exploiting synergies afforded by a host of recently available national-scale data sets derived from interferometric synthetic aperture radar (InSAR) and passive optical remote sensing, this paper describes the development of a novel empirical approach for the provision of regional- to continental-scale estimates of vegetation canopy height. Supported by data from the...
Determination of the maximum MGS mounting height : phase II detailed analysis with LS-DYNA.
DOT National Transportation Integrated Search
2012-12-01
Determination of the maximum Midwest Guardrail System (MGS) mounting height was performed in two phases. : Phase I concentrated on crash testing: two full-scale crash tests were performed on the MGS with top-rail mounting heights : of 34 in. (864 mm)...
Automatically Determining Scale Within Unstructured Point Clouds
NASA Astrophysics Data System (ADS)
Kadamen, Jayren; Sithole, George
2016-06-01
Three dimensional models obtained from imagery have an arbitrary scale and therefore have to be scaled. Automatically scaling these models requires the detection of objects in these models which can be computationally intensive. Real-time object detection may pose problems for applications such as indoor navigation. This investigation poses the idea that relational cues, specifically height ratios, within indoor environments may offer an easier means to obtain scales for models created using imagery. The investigation aimed to show two things, (a) that the size of objects, especially the height off ground is consistent within an environment, and (b) that based on this consistency, objects can be identified and their general size used to scale a model. To test the idea a hypothesis is first tested on a terrestrial lidar scan of an indoor environment. Later as a proof of concept the same test is applied to a model created using imagery. The most notable finding was that the detection of objects can be more readily done by studying the ratio between the dimensions of objects that have their dimensions defined by human physiology. For example the dimensions of desks and chairs are related to the height of an average person. In the test, the difference between generalised and actual dimensions of objects were assessed. A maximum difference of 3.96% (2.93cm) was observed from automated scaling. By analysing the ratio between the heights (distance from the floor) of the tops of objects in a room, identification was also achieved.
NASA Astrophysics Data System (ADS)
Tebbens, S. F.; Barton, C. C.; Scott, B. E.
2016-12-01
Traditionally, the size of natural disaster events such as hurricanes, earthquakes, tornadoes, and floods is measured in terms of wind speed (m/sec), energy released (ergs), or discharge (m3/sec) rather than by economic loss or fatalities. Economic loss and fatalities from natural disasters result from the intersection of the human infrastructure and population with the size of the natural event. This study investigates the size versus cumulative number distribution of individual natural disaster events for several disaster types in the United States. Economic losses are adjusted for inflation to 2014 USD. The cumulative number divided by the time over which the data ranges for each disaster type is the basis for making probabilistic forecasts in terms of the number of events greater than a given size per year and, its inverse, return time. Such forecasts are of interest to insurers/re-insurers, meteorologists, seismologists, government planners, and response agencies. Plots of size versus cumulative number distributions per year for economic loss and fatalities are well fit by power scaling functions of the form p(x) = Cx-β; where, p(x) is the cumulative number of events with size equal to and greater than size x, C is a constant, the activity level, x is the event size, and β is the scaling exponent. Economic loss and fatalities due to hurricanes, earthquakes, tornadoes, and floods are well fit by power functions over one to five orders of magnitude in size. Economic losses for hurricanes and tornadoes have greater scaling exponents, β = 1.1 and 0.9 respectively, whereas earthquakes and floods have smaller scaling exponents, β = 0.4 and 0.6 respectively. Fatalities for tornadoes and floods have greater scaling exponents, β = 1.5 and 1.7 respectively, whereas hurricanes and earthquakes have smaller scaling exponents, β = 0.4 and 0.7 respectively. The scaling exponents can be used to make probabilistic forecasts for time windows ranging from 1 to 1000 years. Forecasts show that on an annual basis, in the United States, the majority of events with 10 fatalities and greater are related to floods and tornadoes; while events with 100 fatalities and greater are less frequent and are dominated by hurricanes and earthquakes. Disaster mitigation strategies need to account for these differences.
Yanto; Lu, Chih-Wei; Lu, Jun-Ming
2017-07-01
In Indonesia, National Standardization Agency of Indonesia issued the Indonesian National Standard SNI 12-1015-1989 and SNI 12-1016-1989 to define the type of furniture dimensions that should be used by children in the elementary school level. This study aims to examine whether the current national standards for elementary school furniture dimensions issued by National Standardization Agency of Indonesia match the up-to-date Indonesian children's anthropometry. Two types of school furniture, small type (Type I, for grade 1-3) and large type (Type II, for grade 4-6), were evaluated in terms of seat height, seat depth, seat width and backrest height of a chair as well as the height and underneath height of a desk. 1146 students aged between 6 and 12 years old participated in the study. Seven anthropometric measurements were taken including stature, sitting shoulder height, sitting elbow height, popliteal height, buttock-popliteal length, knee height and hip breadth. Based on the standard school furniture dimensions and students' body dimensions, numbers of matches and mismatches between them were computed. Results indicated a substantial degree of mismatch between children's anthropometry and the standard dimensions of school furniture. The standard seat height was not appropriate for students among different grades with the mismatch percentage ranging from 63.4% to 96.7% for Type I and 72.7% to 99.0% for Type II. For desk height, the standard dimensions were not appropriate for students among different grades with the mismatch percentage ranging from 32.3% to 88.9% for Type I and 67.7% to 99.0% for Type II. Apparently, the current standards are out of date and need to be updated. Four different sizes of school furniture were hence proposed to accommodate the variation in students' anthropometry from Grade 1 to Grade 6. The proposed standard dimensions (PrS) of school furniture cover a slightly broader range of age and present a higher cumulative fit than the current standard dimensions (CrS). In addition, a better strategy for sizing can be also developed to fit chairs and desks to a larger number of students. Copyright © 2017 Elsevier Ltd. All rights reserved.
Messaoud, Yassine; Chen, Han Y H
2011-02-16
Tree growth has been reported to increase in response to recent global climate change in controlled and semi-controlled experiments, but few studies have reported response of tree growth to increased temperature and atmospheric carbon dioxide (CO₂) concentration in natural environments. This study addresses how recent global climate change has affected height growth of trembling aspen (Populus tremuloides Michx) and black spruce (Picea mariana Mill B.S.) in their natural environments. We sampled 145 stands dominated by aspen and 82 dominated by spruce over the entire range of their distributions in British Columbia, Canada. These stands were established naturally after fire between the 19th and 20th centuries. Height growth was quantified as total heights of sampled dominant and co-dominant trees at breast-height age of 50 years. We assessed the relationships between 50-year height growth and environmental factors at both spatial and temporal scales. We also tested whether the tree growth associated with global climate change differed with spatial environment (latitude, longitude and elevation). As expected, height growth of both species was positively related to temperature variables at the regional scale and with soil moisture and nutrient availability at the local scale. While height growth of trembling aspen was not significantly related to any of the temporal variables we examined, that of black spruce increased significantly with stand establishment date, the anomaly of the average maximum summer temperature between May-August, and atmospheric CO₂ concentration, but not with the Palmer Drought Severity Index. Furthermore, the increase of spruce height growth associated with recent climate change was higher in the western than in eastern part of British Columbia. This study demonstrates that the response of height growth to recent climate change, i.e., increasing temperature and atmospheric CO₂ concentration, did not only differ with tree species, but also their growing spatial environment.
Huang, Qiongyu; Swatantran, Anu; Dubayah, Ralph; Goetz, Scott J
2014-01-01
Avian diversity is under increasing pressures. It is thus critical to understand the ecological variables that contribute to large scale spatial distribution of avian species diversity. Traditionally, studies have relied primarily on two-dimensional habitat structure to model broad scale species richness. Vegetation vertical structure is increasingly used at local scales. However, the spatial arrangement of vegetation height has never been taken into consideration. Our goal was to examine the efficacies of three-dimensional forest structure, particularly the spatial heterogeneity of vegetation height in improving avian richness models across forested ecoregions in the U.S. We developed novel habitat metrics to characterize the spatial arrangement of vegetation height using the National Biomass and Carbon Dataset for the year 2000 (NBCD). The height-structured metrics were compared with other habitat metrics for statistical association with richness of three forest breeding bird guilds across Breeding Bird Survey (BBS) routes: a broadly grouped woodland guild, and two forest breeding guilds with preferences for forest edge and for interior forest. Parametric and non-parametric models were built to examine the improvement of predictability. Height-structured metrics had the strongest associations with species richness, yielding improved predictive ability for the woodland guild richness models (r(2) = ∼ 0.53 for the parametric models, 0.63 the non-parametric models) and the forest edge guild models (r(2) = ∼ 0.34 for the parametric models, 0.47 the non-parametric models). All but one of the linear models incorporating height-structured metrics showed significantly higher adjusted-r2 values than their counterparts without additional metrics. The interior forest guild richness showed a consistent low association with height-structured metrics. Our results suggest that height heterogeneity, beyond canopy height alone, supplements habitat characterization and richness models of forest bird species. The metrics and models derived in this study demonstrate practical examples of utilizing three-dimensional vegetation data for improved characterization of spatial patterns in species richness.
Huang, Qiongyu; Swatantran, Anu; Dubayah, Ralph; Goetz, Scott J.
2014-01-01
Avian diversity is under increasing pressures. It is thus critical to understand the ecological variables that contribute to large scale spatial distribution of avian species diversity. Traditionally, studies have relied primarily on two-dimensional habitat structure to model broad scale species richness. Vegetation vertical structure is increasingly used at local scales. However, the spatial arrangement of vegetation height has never been taken into consideration. Our goal was to examine the efficacies of three-dimensional forest structure, particularly the spatial heterogeneity of vegetation height in improving avian richness models across forested ecoregions in the U.S. We developed novel habitat metrics to characterize the spatial arrangement of vegetation height using the National Biomass and Carbon Dataset for the year 2000 (NBCD). The height-structured metrics were compared with other habitat metrics for statistical association with richness of three forest breeding bird guilds across Breeding Bird Survey (BBS) routes: a broadly grouped woodland guild, and two forest breeding guilds with preferences for forest edge and for interior forest. Parametric and non-parametric models were built to examine the improvement of predictability. Height-structured metrics had the strongest associations with species richness, yielding improved predictive ability for the woodland guild richness models (r2 = ∼0.53 for the parametric models, 0.63 the non-parametric models) and the forest edge guild models (r2 = ∼0.34 for the parametric models, 0.47 the non-parametric models). All but one of the linear models incorporating height-structured metrics showed significantly higher adjusted-r2 values than their counterparts without additional metrics. The interior forest guild richness showed a consistent low association with height-structured metrics. Our results suggest that height heterogeneity, beyond canopy height alone, supplements habitat characterization and richness models of forest bird species. The metrics and models derived in this study demonstrate practical examples of utilizing three-dimensional vegetation data for improved characterization of spatial patterns in species richness. PMID:25101782
Borowiak, Klaudia; Wujeska, Agnieszka
2012-03-01
The cumulative ozone effect on morphological parameters (visible leaf injury, plant height and leaf growth, number of bean pods, petunia flowers and stalks) was examined in this study. Well-known ozonesensitive (Bel W3) and ozone-resistant (Bel B) tobacco cultivars as well as bean cv. Nerina and petunia cv. White cascade, both recognized as ozone sensitive, were used in the experiment. Investigations were carried out at two exposure sites varying in tropospheric ozone levels. Ozone negatively affected the leaf growth of both tobacco cultivars and bean. A negative relation was also found for ozone concentration and tobacco plant height. Number of petunia flowers and stalks and bean pods was positively correlated with ozone concentration. This could have been connected with earlier plant maturation due to faster generative development of plants in ozone-stress conditions.
Tharavichtikul, Ekkasit; Meungwong, Pooriwat; Chitapanarux, Taned; Chakrabandhu, Somvilai; Klunklin, Pitchayaponne; Onchan, Wimrak; Wanwilairat, Somsak; Traisathit, Patrinee; Galalae, Razvan; Chitapanarux, Imjai
2014-06-01
To evaluate association between equivalent dose in 2 Gy (EQD2) to rectal point dose and gastrointestinal toxicity from whole pelvic radiotherapy (WPRT) and intracavitary brachytherapy (ICBT) in cervical cancer patients who were evaluated by rectosigmoidoscopy in Faculty of Medicine, Chiang Mai University. Retrospective study was designed for the patients with locally advanced cervical cancer, treated by radical radiotherapy from 2004 to 2009 and were evaluated by rectosigmoidoscopy. The cumulative doses of WPRT and ICBT to the maximally rectal point were calculated to the EQD2 and evaluated the association of toxicities. Thirty-nine patients were evaluated for late rectal toxicity. The mean cumulative dose in term of EQD2 to rectum was 64.2 Gy. Grade 1 toxicities were the most common findings. According to endoscopic exam, the most common toxicities were congested mucosa (36 patients) and telangiectasia (32 patients). In evaluation between rectal dose in EQD2 and toxicities, no association of cumulative rectal dose to rectal toxicity, except the association of cumulative rectal dose in EQD2 >65 Gy to late effects of normal tissue (LENT-SOMA) scale ≥ grade 2 (p = 0.022; odds ratio, 5.312; 95% confidence interval, 1.269-22.244). The cumulative rectal dose in EQD2 >65 Gy have association with ≥ grade 2 LENT-SOMA scale.
Meungwong, Pooriwat; Chitapanarux, Taned; Chakrabandhu, Somvilai; Klunklin, Pitchayaponne; Onchan, Wimrak; Wanwilairat, Somsak; Traisathit, Patrinee; Galalae, Razvan; Chitapanarux, Imjai
2014-01-01
Purpose To evaluate association between equivalent dose in 2 Gy (EQD2) to rectal point dose and gastrointestinal toxicity from whole pelvic radiotherapy (WPRT) and intracavitary brachytherapy (ICBT) in cervical cancer patients who were evaluated by rectosigmoidoscopy in Faculty of Medicine, Chiang Mai University. Materials and Methods Retrospective study was designed for the patients with locally advanced cervical cancer, treated by radical radiotherapy from 2004 to 2009 and were evaluated by rectosigmoidoscopy. The cumulative doses of WPRT and ICBT to the maximally rectal point were calculated to the EQD2 and evaluated the association of toxicities. Results Thirty-nine patients were evaluated for late rectal toxicity. The mean cumulative dose in term of EQD2 to rectum was 64.2 Gy. Grade 1 toxicities were the most common findings. According to endoscopic exam, the most common toxicities were congested mucosa (36 patients) and telangiectasia (32 patients). In evaluation between rectal dose in EQD2 and toxicities, no association of cumulative rectal dose to rectal toxicity, except the association of cumulative rectal dose in EQD2 >65 Gy to late effects of normal tissue (LENT-SOMA) scale ≥ grade 2 (p = 0.022; odds ratio, 5.312; 95% confidence interval, 1.269-22.244). Conclusion The cumulative rectal dose in EQD2 >65 Gy have association with ≥ grade 2 LENT-SOMA scale. PMID:25061573
Vertical flows of supergranular and mesogranular scale observed on the sun with OSO 8
NASA Technical Reports Server (NTRS)
November, L. J.; Toomre, J.; Gebbie, K. B.; Simon, G. W.
1982-01-01
A program of observations was carried out in order to study the penetration of supergranular flows over a broad range of heights in the solar atmosphere. Steady Doppler velocities are determined from observations of a Si II spectral line using the Ultraviolet Spectrometer on the Orbiting Solar Observatory 8 (OSO 8) satellite and Fe I and Mg I lines with the diode-array instrument on the vacuum telescope at Sacramento Peak Observatory (SPO). The heights of formation of these spectral lines span about 1400 km or nearly 11 density scale heights from the photosphere to the middle chromosphere. Steady vertical flows on spatial scales typical of supergranulation and mesogranulation have been detected in the middle chromosphere with OSO 8. The patterns of intensity and steady velocity of granular scale are reproducible in successive data sets. The patterns appear to evolve slowly over the 9 hr period spanned by six orbits.
Eye height scaling of absolute size in immersive and nonimmersive displays
NASA Technical Reports Server (NTRS)
Dixon, M. W.; Wraga, M.; Proffitt, D. R.; Williams, G. C.; Kaiser, M. K. (Principal Investigator)
2000-01-01
Eye-height (EH) scaling of absolute height was investigated in three experiments. In Experiment 1, standing observers viewed cubes in an immersive virtual environment. Observers' center of projection was placed at actual EH and at 0.7 times actual EH. Observers' size judgments revealed that the EH manipulation was 76.8% effective. In Experiment 2, seated observers viewed the same cubes on an interactive desktop display; however, no effect of EH was found in response to the simulated EH manipulation. Experiment 3 tested standing observers in the immersive environment with the field of view reduced to match that of the desktop. Comparable to Experiment 1, the effect of EH was 77%. These results suggest that EH scaling is not generally used when people view an interactive desktop display because the altitude of the center of projection is indeterminate. EH scaling is spontaneously evoked, however, in immersive environments.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Su, J. T.; Priya, T. G.; Liu, Y.
At present, there have been few extreme ultraviolet (EUV) imaging observations of spatial variations of the density perturbations due to the slow magnetoacoustic waves (SMWs) propagating along the solar coronal magnetic fields. In this paper, we present such observations taken from the polar region of the corona with the Atmospheric Imaging Assembly (AIA) on board the Solar Dynamics Observatory and investigate the amplitude of quasi-periodic propagating disturbances that increase with height in the lower corona (0-9 Mm over the solar limb). We statistically determined the following parameters associated with the disturbances: pressure scale height, period, and wavelength in AIA 171more » Å, 193 Å, and 211 Å channels. The scale height and wavelength are dependent of temperature, while the period is independent of temperature. The acoustic velocities inferred from the scale height highly correlate with the ratios of wavelength to period, i.e., phase speeds. They provide evidence that the propagating disturbances in the lower corona are likely SMWs and the spatial variations in EUV intensity in the polar region likely reflects the density compressional effect by the propagating SMWs.« less
Laser Altimeter for Flight Simulator
NASA Technical Reports Server (NTRS)
Webster, L. D.
1986-01-01
Height of flight-simulator probe above model of terrain measured by automatic laser triangulation system. Airplane simulated by probe that moves over model of terrain. Altitude of airplane scaled from height of probe above model. Height measured by triangulation of laser beam aimed at intersection of model surface with plumb line of probe.
Semantic 3d City Model to Raster Generalisation for Water Run-Off Modelling
NASA Astrophysics Data System (ADS)
Verbree, E.; de Vries, M.; Gorte, B.; Oude Elberink, S.; Karimlou, G.
2013-09-01
Water run-off modelling applied within urban areas requires an appropriate detailed surface model represented by a raster height grid. Accurate simulations at this scale level have to take into account small but important water barriers and flow channels given by the large-scale map definitions of buildings, street infrastructure, and other terrain objects. Thus, these 3D features have to be rasterised such that each cell represents the height of the object class as good as possible given the cell size limitations. Small grid cells will result in realistic run-off modelling but with unacceptable computation times; larger grid cells with averaged height values will result in less realistic run-off modelling but fast computation times. This paper introduces a height grid generalisation approach in which the surface characteristics that most influence the water run-off flow are preserved. The first step is to create a detailed surface model (1:1.000), combining high-density laser data with a detailed topographic base map. The topographic map objects are triangulated to a set of TIN-objects by taking into account the semantics of the different map object classes. These TIN objects are then rasterised to two grids with a 0.5m cell-spacing: one grid for the object class labels and the other for the TIN-interpolated height values. The next step is to generalise both raster grids to a lower resolution using a procedure that considers the class label of each cell and that of its neighbours. The results of this approach are tested and validated by water run-off model runs for different cellspaced height grids at a pilot area in Amersfoort (the Netherlands). Two national datasets were used in this study: the large scale Topographic Base map (BGT, map scale 1:1.000), and the National height model of the Netherlands AHN2 (10 points per square meter on average). Comparison between the original AHN2 height grid and the semantically enriched and then generalised height grids shows that water barriers are better preserved with the new method. This research confirms the idea that topographical information, mainly the boundary locations and object classes, can enrich the height grid for this hydrological application.
Resolving the disc-halo degeneracy - I: a look at NGC 628
NASA Astrophysics Data System (ADS)
Aniyan, S.; Freeman, K. C.; Arnaboldi, M.; Gerhard, O. E.; Coccato, L.; Fabricius, M.; Kuijken, K.; Merrifield, M.; Ponomareva, A. A.
2018-05-01
The decomposition of the rotation curve of galaxies into contribution from the disc and dark halo remains uncertain and depends on the adopted mass-to-light ratio (M/L) of the disc. Given the vertical velocity dispersion of stars and disc scale height, the disc surface mass density and hence the M/L can be estimated. We address a conceptual problem with previous measurements of the scale height and dispersion. When using this method, the dispersion and scale height must refer to the same population of stars. The scale height is obtained from near-infrared (IR) studies of edge-on galaxies and is weighted towards older kinematically hotter stars, whereas the dispersion obtained from integrated light in the optical bands includes stars of all ages. We aim to extract the dispersion for the hotter stars, so that it can then be used with the correct scale height to obtain the disc surface mass density. We use a sample of planetary nebulae (PNe) as dynamical tracers in the face-on galaxy NGC 628. We extract two different dispersions from its velocity histogram - representing the older and younger PNe. We also present complementary stellar absorption spectra in the inner regions of this galaxy and use a direct pixel fitting technique to extract the two components. Our analysis concludes that previous studies, which do not take account of the young disc, underestimate the disc surface mass density by a factor of ˜2. This is sufficient to make a maximal disc for NGC 628 appear like a submaximal disc.
NASA Astrophysics Data System (ADS)
Houser, Chris; Wernette, Phil; Weymer, Bradley A.
2018-02-01
The impact of storm surge on a barrier island tends to be considered from a single cross-shore dimension, dependent on the relative elevations of the storm surge and dune crest. However, the foredune is rarely uniform and can exhibit considerable variation in height and width at a range of length scales. In this study, LiDAR data from barrier islands in Texas and Florida are used to explore how shoreline position and dune morphology vary alongshore, and to determine how this variability is altered or reinforced by storms and post-storm recovery. Wavelet analysis reveals that a power law can approximate historical shoreline change across all scales, but that storm-scale shoreline change ( 10 years) and dune height exhibit similar scale-dependent variations at swash and surf zone scales (< 1000 m). The in-phase nature of the relationship between dune height and storm-scale shoreline change indicates that areas of greater storm-scale shoreline retreat are associated with areas of smaller dunes. It is argued that the decoupling of storm-scale and historical shoreline change at swash and surf zone scales is also associated with the alongshore redistribution of sediment and the tendency of shorelines to evolve to a more diffusive (or straight) pattern with time. The wavelet analysis of the data for post-storm dune recovery is also characterized by red noise at the smallest scales characteristic of diffusive systems, suggesting that it is possible that small-scale variations in dune height can be repaired through alongshore recovery and expansion if there is sufficient time between storms. However, the time required for dune recovery exceeds the time between storms capable of eroding and overwashing the dune. Correlation between historical shoreline retreat and the variance of the dune at swash and surf zone scales suggests that the persistence of the dune is an important control on transgression through island migration or shoreline retreat with relative sea-level rise.
NASA Astrophysics Data System (ADS)
Hugenholtz, Chris H.; Barchyn, Thomas E.; Boulding, Adam
2017-04-01
Using HiRISE digital terrain models (DTMs), we developed a large morphological dataset to examine the three-dimensional shape, size, and scaling of Martian transverse aeolian ridges (TARs). Considerable debate exists on the characteristic morphology of TARs and the origins of these enigmatic bedforms. Some researchers suggest polygenesis or multiple classes of similar bedforms. Reliably characterizing the morphology of TARs is an essential prerequisite to developing and evaluating process-based models of TAR genesis and unraveling aeolian processes on the surface of Mars. We present measurements of TAR morphology from a large, DTM-derived dataset (n = 2295). We focused on TARs with 'simple' morphologies in order enable more defensible discretization. Histograms and cumulative log-frequency plots of morphometric parameters (length, width, height, elongation ratio, and wavelength) indicate the sample represents a continuum of bedforms from a single population. A typical TAR from our dataset is 88.5 m long (longest planview axis), 17.3 m wide (shortest planview axis), 1.3 m tall, and has a wavelength of 25.8 m. Combined with these data, the bulk of evidence presented to date suggests that interpreting TARs as megaripples is the most viable working hypothesis.
ERIC Educational Resources Information Center
Neiman, Robert A.
2002-01-01
Describes the use of small-scale change projects by Philadelphia's Department of Human Services to generate new outcomes and new skills and experience that improved basic day-to-day operations, strategic planning, and cumulatively produced larger-scale changes in service, financing, and performance. (Author/LRW)
Respiratory symptoms and lung function in bauxite miners.
Beach, J R; de Klerk, N H; Fritschi, L; Sim, M R; Musk, A W; Benke, G; Abramson, M J; McNeil, J J
2001-09-01
To determine whether cumulative bauxite exposure is associated with respiratory symptoms or changes in lung function in a group of bauxite miners. Current employees at three bauxite mines in Australia were invited to participate in a survey comprising: questionnaire on demographic details, respiratory symptoms, and work history; skin prick tests for four common aeroallergens; and spirometry. A task exposure matrix was constructed for bauxite exposure in all tasks in all jobs based on monitoring data. Data were examined for associations between cumulative bauxite exposure, and respiratory symptoms and lung function, by regression analyses. The participation rate was 86%. Self-reported work-related respiratory symptoms were reported by relatively few subjects (1.5%-11.8%). After adjustment for age and smoking no significant differences in the prevalence of respiratory symptoms were identified between subjects, in the quartiles of cumulative bauxite exposure distribution. The forced expiratory volume in I s (FEV1) of the exposed group was found to be significantly lower than that for the unexposed group. After adjustment for age, height, and smoking there were no statistically significant differences between quartiles in FEVI, forced vital capacity (FVC) and FEVl/FVC ratio. These data provide little evidence of a serious adverse effect on respiratory health associated with exposure to bauxite in an open-cut bauxite mine in present day conditions.
Dimers in Piecewise Temperleyan Domains
NASA Astrophysics Data System (ADS)
Russkikh, Marianna
2018-03-01
We study the large-scale behavior of the height function in the dimer model on the square lattice. Richard Kenyon has shown that the fluctuations of the height function on Temperleyan discretizations of a planar domain converge in the scaling limit (as the mesh size tends to zero) to the Gaussian Free Field with Dirichlet boundary conditions. We extend Kenyon's result to a more general class of discretizations. Moreover, we introduce a new factorization of the coupling function of the double-dimer model into two discrete holomorphic functions, which are similar to discrete fermions defined in Smirnov (Proceedings of the international congress of mathematicians (ICM), Madrid, Spain, 2006; Ann Math (2) 172:1435-1467, 2010). For Temperleyan discretizations with appropriate boundary modifications, the results of Kenyon imply that the expectation of the double-dimer height function converges to a harmonic function in the scaling limit. We use the above factorization to extend this result to the class of all polygonal discretizations, that are not necessarily Temperleyan. Furthermore, we show that, quite surprisingly, the expectation of the double-dimer height function in the Temperleyan case is exactly discrete harmonic (for an appropriate choice of Laplacian) even before taking the scaling limit.
Selection of nesting habitat by sharp-tailed grouse in the Nebraska sandhills
Prose, Bart L.; Cade, Brian S.; Hein, Dale
2002-01-01
We evaluated nesting habitat selection (disproportionate use compared to availability) by plains sharp-tailed grouse (Tympanuchus phasianellus jamesi) on rangelands grazed by cattle (Bos taurus) relative to height, density, and heterogeneity of residual herbaceous vegetation remaining from previous growing seasons. Residual cover is critical for nesting sharp-tailed grouse and can be lacking on grazed rangelands. Aerial photography and a geographic information system were used to analyze residual cover height classes and several measures of residual cover heterogeneity in nest (n = 38) and random (n = 38) plots. Height classes corresponded to visual obstruction readings (VORs), the height to which total visual obstruction by vegetation occurs. Analyses were conducted for five spatial scales ranging from 1 to 16 ha to test for scale effects on nesting habitat selection. Sharp-tailed grouse selected nesting habitat with more area in tall (greater than or equal to 4 cm VOR) residual cover than at random sites at all scales, less area in short residual cover (less than 2 cm VOR) at the I-ha scale, and less area in short and medium (2 to 3.9 cm YOR) residual cover at the 2- through 16-ha scales. Selection of shrub habitat containing patches of shrubs was evident only at the 16-ha scale. Patches of tall residual cover were larger in nest plots than in random plots at the 8- and 16-ha scales, and patches of short cover were smaller in nest plots at the I-ha scale. Two scales of pattern defined by mean patch size were detected for overall residual cover, but did not relate to nesting habitat selection.
O’Connor, Christopher D.; Lynch, Ann M.
2016-01-01
A significant concern about Metabolic Scaling Theory (MST) in real forests relates to consistent differences between the values of power law scaling exponents of tree primary size measures used to estimate mass and those predicted by MST. Here we consider why observed scaling exponents for diameter and height relationships deviate from MST predictions across three semi-arid conifer forests in relation to: (1) tree condition and physical form, (2) the level of inter-tree competition (e.g. open vs closed stand structure), (3) increasing tree age, and (4) differences in site productivity. Scaling exponent values derived from non-linear least-squares regression for trees in excellent condition (n = 381) were above the MST prediction at the 95% confidence level, while the exponent for trees in good condition were no different than MST (n = 926). Trees that were in fair or poor condition, characterized as diseased, leaning, or sparsely crowned had exponent values below MST predictions (n = 2,058), as did recently dead standing trees (n = 375). Exponent value of the mean-tree model that disregarded tree condition (n = 3,740) was consistent with other studies that reject MST scaling. Ostensibly, as stand density and competition increase trees exhibited greater morphological plasticity whereby the majority had characteristically fair or poor growth forms. Fitting by least-squares regression biases the mean-tree model scaling exponent toward values that are below MST idealized predictions. For 368 trees from Arizona with known establishment dates, increasing age had no significant impact on expected scaling. We further suggest height to diameter ratios below MST relate to vertical truncation caused by limitation in plant water availability. Even with environmentally imposed height limitation, proportionality between height and diameter scaling exponents were consistent with the predictions of MST. PMID:27391084
Swetnam, Tyson L; O'Connor, Christopher D; Lynch, Ann M
2016-01-01
A significant concern about Metabolic Scaling Theory (MST) in real forests relates to consistent differences between the values of power law scaling exponents of tree primary size measures used to estimate mass and those predicted by MST. Here we consider why observed scaling exponents for diameter and height relationships deviate from MST predictions across three semi-arid conifer forests in relation to: (1) tree condition and physical form, (2) the level of inter-tree competition (e.g. open vs closed stand structure), (3) increasing tree age, and (4) differences in site productivity. Scaling exponent values derived from non-linear least-squares regression for trees in excellent condition (n = 381) were above the MST prediction at the 95% confidence level, while the exponent for trees in good condition were no different than MST (n = 926). Trees that were in fair or poor condition, characterized as diseased, leaning, or sparsely crowned had exponent values below MST predictions (n = 2,058), as did recently dead standing trees (n = 375). Exponent value of the mean-tree model that disregarded tree condition (n = 3,740) was consistent with other studies that reject MST scaling. Ostensibly, as stand density and competition increase trees exhibited greater morphological plasticity whereby the majority had characteristically fair or poor growth forms. Fitting by least-squares regression biases the mean-tree model scaling exponent toward values that are below MST idealized predictions. For 368 trees from Arizona with known establishment dates, increasing age had no significant impact on expected scaling. We further suggest height to diameter ratios below MST relate to vertical truncation caused by limitation in plant water availability. Even with environmentally imposed height limitation, proportionality between height and diameter scaling exponents were consistent with the predictions of MST.
A continuous scale-space method for the automated placement of spot heights on maps
NASA Astrophysics Data System (ADS)
Rocca, Luigi; Jenny, Bernhard; Puppo, Enrico
2017-12-01
Spot heights and soundings explicitly indicate terrain elevation on cartographic maps. Cartographers have developed design principles for the manual selection, placement, labeling, and generalization of spot height locations, but these processes are work-intensive and expensive. Finding an algorithmic criterion that matches the cartographers' judgment in ranking the significance of features on a terrain is a difficult endeavor. This article proposes a method for the automated selection of spot heights locations representing natural features such as peaks, saddles and depressions. A lifespan of critical points in a continuous scale-space model is employed as the main measure of the importance of features, and an algorithm and a data structure for its computation are described. We also introduce a method for the comparison of algorithmically computed spot height locations with manually produced reference compilations. The new method is compared with two known techniques from the literature. Results show spot height locations that are closer to reference spot heights produced manually by swisstopo cartographers, compared to previous techniques. The introduced method can be applied to elevation models for the creation of topographic and bathymetric maps. It also ranks the importance of extracted spot height locations, which allows for a variation in the size of symbols and labels according to the significance of represented features. The importance ranking could also be useful for adjusting spot height density of zoomable maps in real time.
Object Based Building Extraction and Building Period Estimation from Unmanned Aerial Vehicle Data
NASA Astrophysics Data System (ADS)
Comert, Resul; Kaplan, Onur
2018-04-01
The aim of this study is to examine whether it is possible to estimate the building periods with respect to the building heights in the urban scale seismic performance assessment studies by using the building height retrieved from the unmanned aerial vehicle (UAV) data. For this purpose, a small area, which includes eight residential reinforced concrete buildings, was selected in Eskisehir (Turkey) city center. In this paper, the possibilities of obtaining the building heights that are used in the estimation of building periods from UAV based data, have been investigated. The investigations were carried out in 3 stages; (i) Building boundary extraction with Object Based Image Analysis (OBIA), (ii) height calculation for buildings of interest from nDSM and accuracy assessment with the terrestrial survey. (iii) Estimation of building period using height information. The average difference between the periods estimated according to the heights obtained from field measurements and from the UAV data is 2.86 % and the maximum difference is 13.2 %. Results of this study have shown that the building heights retrieved from the UAV data can be used in the building period estimation in the urban scale vulnerability assessments.
Foster, Bethany J; Gao, Tao; Mackie, Andrew S; Zemel, Babette S; Ali, Huma; Platt, Robert W; Colan, Steven D
2013-04-01
Left ventricular (LV) mass varies in proportion to lean body mass (LBM) but is usually expressed relative to height or body surface area (BSA), each of which functions as a surrogate for LBM. The aims of this study were to characterize the adiposity-related biases associated with each of these scaling variables and to determine the impact of these biases on the diagnosis of LV hypertrophy (LVH) in a group of children at risk for LVH. In a retrospective study, LV mass was estimated using M-mode echocardiography in 222 healthy nonoverweight reference children and 112 children "at risk" for LVH (48 healthy overweight children and 64 children with hypertension). LBM was estimated for all children using validated predictive equations and was considered the criterion scaling variable. Z scores for LV mass for LBM, LV mass for height, and LV mass for BSA were calculated for each child relative to the reference group. The performance of height-based and BSA-based Z scores were compared with that of LBM-based Z scores at different levels of adiposity (estimated by the Z score for body mass index for age [BMIz]). Among healthy normotensive children, LV mass-for-height Z scores were greater than LV mass-for-LBM Z scores at higher values of BMIz and lower than LV mass-for-LBM Z scores at lower values of BMIz (R(2) = 0.52, P < .0001). LV mass-for-BSA Z scores for agreed well with LBM-based Z scores at BMIz < 0.7 but were lower than LV mass-for-LBM Z scores for at BMIz > 0.7 (R(2) = 0.31, P < .0001). Compared with 13% of at-risk children classified as having LVH on the basis of LV mass for LBM > 95th percentile, 30% and 11% had LVH when LV mass was scaled to height and BSA, respectively. Scaling LV mass to BSA in children results in less misclassification with respect to LVH than does scaling to height. Copyright © 2013 American Society of Echocardiography. Published by Mosby, Inc. All rights reserved.
1983-09-01
adult man (full-scale height = 171 cm) and child (full-scale height = 86 cm), with arms down. We used the full-scale figure to reflect a worst-case... child for all orientations was much higher than that for the adult (e.g., 0.187 W/kg versus 0.063 W/kg), which is expected since the frequency is closer...to the resonance frequency for the child . Another series of scale-model measurements was conducted for determination of the average SAR values for
Quantitative Analysis of Cotton Canopy Size in Field Conditions Using a Consumer-Grade RGB-D Camera.
Jiang, Yu; Li, Changying; Paterson, Andrew H; Sun, Shangpeng; Xu, Rui; Robertson, Jon
2017-01-01
Plant canopy structure can strongly affect crop functions such as yield and stress tolerance, and canopy size is an important aspect of canopy structure. Manual assessment of canopy size is laborious and imprecise, and cannot measure multi-dimensional traits such as projected leaf area and canopy volume. Field-based high throughput phenotyping systems with imaging capabilities can rapidly acquire data about plants in field conditions, making it possible to quantify and monitor plant canopy development. The goal of this study was to develop a 3D imaging approach to quantitatively analyze cotton canopy development in field conditions. A cotton field was planted with 128 plots, including four genotypes of 32 plots each. The field was scanned by GPhenoVision (a customized field-based high throughput phenotyping system) to acquire color and depth images with GPS information in 2016 covering two growth stages: canopy development, and flowering and boll development. A data processing pipeline was developed, consisting of three steps: plot point cloud reconstruction, plant canopy segmentation, and trait extraction. Plot point clouds were reconstructed using color and depth images with GPS information. In colorized point clouds, vegetation was segmented from the background using an excess-green (ExG) color filter, and cotton canopies were further separated from weeds based on height, size, and position information. Static morphological traits were extracted on each day, including univariate traits (maximum and mean canopy height and width, projected canopy area, and concave and convex volumes) and a multivariate trait (cumulative height profile). Growth rates were calculated for univariate static traits, quantifying canopy growth and development. Linear regressions were performed between the traits and fiber yield to identify the best traits and measurement time for yield prediction. The results showed that fiber yield was correlated with static traits after the canopy development stage ( R 2 = 0.35-0.71) and growth rates in early canopy development stages ( R 2 = 0.29-0.52). Multi-dimensional traits (e.g., projected canopy area and volume) outperformed one-dimensional traits, and the multivariate trait (cumulative height profile) outperformed univariate traits. The proposed approach would be useful for identification of quantitative trait loci (QTLs) controlling canopy size in genetics/genomics studies or for fiber yield prediction in breeding programs and production environments.
Heating of the solar middle chromosphere by large-scale electric currents
NASA Technical Reports Server (NTRS)
Goodman, M. L.
1995-01-01
A global resistive, two-dimensional, time-dependent magnetohydrodynamic (MHD) model is used to introduce and support the hypothesis that the quiet solar middle chromosphere is heated by resistive dissipation of large-scale electric currents which fill most of its volume. The scale height and maximum magnitude of the current density are 400 km and 31.3 m/sq m, respectively. The associated magnetic field is almost horizontal, has the same scale height as the current density, and has a maximum magnitude of 153 G. The current is carried by electrons flowing across magnetic field lines at 1 m/s. The resistivity is the electron contribution to the Pedersen resitivity for a weakly ionized, strongly magnetized, hydrogen gas. The model does not include a driving mechanism. Most of the physical quantities in the model decrease exponentially with time on a resistive timescale of 41.3 minutes. However, the initial values and spatial; dependence of these quantities are expected to be essentially the same as they would be if the correct driving mechanism were included in a more general model. The heating rate per unit mass is found to be 4.5 x 10(exp 9) ergs/g/s, independent of height and latitude. The electron density scale height is found to be 800 km. The model predicts that 90% of the thermal energy required to heat the middle chromosphere is deposited in the height range 300-760 km above the temperature minimum. It is shown to be consistent to assume that the radiation rate per unit volume is proportional to the magnetic energy density, and then it follows that the heating rate per unit volume is also proportional to the energy from the photosphere into the overlying chromosphere are briefly discussed as possible driving mechanisms for establishing and maintaining the current system. The case in which part of or all of the current is carried by protons and metal ions, and the contribution of electron-proton scattering to the current are also considered, with the conclusion that these effects do not change the qualitative prediction of the model, but probably change the quantitative predictions slightly, mainly by increasing the maximum magntiude of the current density and magnetic field to at most approximately 100 mA/m and approximately 484 G, respectively. The heating rate per unit mass, current density scale height, magnetic field scale height, temperatures, and pressures are unchanged or are only slightly changed by including these additional effects due to protons and ions.
Coble, Adam P; Cavaleri, Molly A
2017-10-01
A key trait used in canopy and ecosystem function modeling, leaf mass per area (LMA), is influenced by changes in both leaf thickness and leaf density (LMA = Thickness × Density). In tall trees, LMA is understood to increase with height through two primary mechanisms: (i) increasing palisade layer thickness (and thus leaf thickness) in response to light and/or (ii) reduced cell expansion and intercellular air space in response to hydrostatic constraints, leading to increased leaf density. Our objective was to investigate within-canopy gradients in leaf anatomical traits in order to understand environmental factors that influence leaf morphology in a sugar maple (Acer saccharum Marshall) forest canopy. We teased apart the effects of light and height on anatomical traits by sampling at exposed and closed canopies that had different light conditions at similar heights. As expected, palisade layer thickness responded strongly to cumulative light exposure. Mesophyll porosity, however, was weakly and negatively correlated with light and height (i.e., hydrostatic gradients). Reduced mesophyll porosity was not likely caused by limitations on cell expansion; in fact, epidermal cell width increased with height. Palisade layer thickness was better related to LMA, leaf density and leaf thickness than was mesophyll porosity. Vein diameter and fraction of vascular tissue also increased with height and LMA, density and thickness, revealing that greater investment in vascular and support tissue may be a third mechanism for increased LMA with height. Overall, decreasing mesophyll porosity with height was likely due to palisade cells expanding into the available air space and also greater investments in vascular and support tissue, rather than a reduction of cell expansion due to hydrostatic constraints. Our results provide evidence that light influences both palisade layer thickness and mesophyll porosity and indicate that hydrostatic gradients influence leaf vascular and support tissues in mature Acer saccharum trees. © The Author 2017. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.
Spectral decomposition of internal gravity wave sea surface height in global models
NASA Astrophysics Data System (ADS)
Savage, Anna C.; Arbic, Brian K.; Alford, Matthew H.; Ansong, Joseph K.; Farrar, J. Thomas; Menemenlis, Dimitris; O'Rourke, Amanda K.; Richman, James G.; Shriver, Jay F.; Voet, Gunnar; Wallcraft, Alan J.; Zamudio, Luis
2017-10-01
Two global ocean models ranging in horizontal resolution from 1/12° to 1/48° are used to study the space and time scales of sea surface height (SSH) signals associated with internal gravity waves (IGWs). Frequency-horizontal wavenumber SSH spectral densities are computed over seven regions of the world ocean from two simulations of the HYbrid Coordinate Ocean Model (HYCOM) and three simulations of the Massachusetts Institute of Technology general circulation model (MITgcm). High wavenumber, high-frequency SSH variance follows the predicted IGW linear dispersion curves. The realism of high-frequency motions (>0.87 cpd) in the models is tested through comparison of the frequency spectral density of dynamic height variance computed from the highest-resolution runs of each model (1/25° HYCOM and 1/48° MITgcm) with dynamic height variance frequency spectral density computed from nine in situ profiling instruments. These high-frequency motions are of particular interest because of their contributions to the small-scale SSH variability that will be observed on a global scale in the upcoming Surface Water and Ocean Topography (SWOT) satellite altimetry mission. The variance at supertidal frequencies can be comparable to the tidal and low-frequency variance for high wavenumbers (length scales smaller than ˜50 km), especially in the higher-resolution simulations. In the highest-resolution simulations, the high-frequency variance can be greater than the low-frequency variance at these scales.
NASA Astrophysics Data System (ADS)
Schneider, Johannes M.; Turowski, Jens M.; Rickenmann, Dieter; Hegglin, Ramon; Arrigo, Sabrina; Mao, Luca; Kirchner, James W.
2014-03-01
Bed load transport during storm events is both an agent of geomorphic change and a significant natural hazard in mountain regions. Thus, predicting bed load transport is a central challenge in fluvial geomorphology and natural hazard risk assessment. Bed load transport during storm events depends on the width and depth of bed scour, as well as the transport distances of individual sediment grains. We traced individual gravels in two steep mountain streams, the Erlenbach (Switzerland) and Rio Cordon (Italy), using magnetic and radio frequency identification tags, and measured their bed load transport rates using calibrated geophone bed load sensors in the Erlenbach and a bed load trap in the Rio Cordon. Tracer transport distances and bed load volumes exhibited approximate power law scaling with both the peak stream power and the cumulative stream energy of individual hydrologic events. Bed load volumes scaled much more steeply with peak stream power and cumulative stream energy than tracer transport distances did, and bed load volumes scaled as roughly the third power of transport distances. These observations imply that large bed load transport events become large primarily by scouring the bed deeper and wider, and only secondarily by transporting the mobilized sediment farther. Using the sediment continuity equation, we can estimate the mean effective thickness of the actively transported layer, averaged over the entire channel width and the duration of individual flow events. This active layer thickness also followed approximate power law scaling with peak stream power and cumulative stream energy and ranged up to 0.57 m in the Erlenbach, broadly consistent with independent measurements.
Scale Height variations with solar cycle in the ionosphere of Mars
NASA Astrophysics Data System (ADS)
Sanchez-Cano, Beatriz; Lester, Mark; Witasse, Olivier; Milan, Stephen E.; Hall, Benjamin E. S.; Cartacci, Marco; Radicella, Sandro M.; Blelly, Pierre-Louis
2015-04-01
The Mars Advanced Radar for Subsurface and Ionospheric Sounding (MARSIS) on board the Mars Express spacecraft has been probing the topside of the ionosphere of Mars since June 2005, covering currently almost one solar cycle. A good knowledge of the behaviour of the ionospheric variability for a whole solar period is essential since the ionosphere is strongly dependent on solar activity. Using part of this dataset, covering the years 2005 - 2012, differences in the shape of the topside electron density profiles have been observed. These variations seem to be linked to changes in the ionospheric temperature due to the solar cycle variation. In particular, Mars' ionospheric response to the extreme solar minimum between end-2007 and end-2009 followed a similar pattern to the response observed in the Earth's ionosphere, despite the large differences related to internal origin of the magnetic field between both planets. Plasma parameters such as the scale height as a function of altitude, the main peak characteristics (altitude, density), the total electron content (TEC), the temperatures, and the ionospheric thermal pressures show variations related to the solar cycle. The main changes in the topside ionosphere are detected during the period of very low solar minimum, when ionospheric cooling occurs. The effect on the scale height is analysed in detail. In contrast, a clear increase of the scale height is observed during the high solar activity period due to enhanced ionospheric heating. The scale height variation during the solar cycle has been empirically modelled. The results have been compared with other datasets such as radio-occultation and retarding potential analyser data from old missions, especially in low solar activity periods (e.g. Mariner 4, Viking 1 and 2 landers), as well as with numerical modelling.
Self-organized criticality in asymmetric exclusion model with noise for freeway traffic
NASA Astrophysics Data System (ADS)
Nagatani, Takashi
1995-02-01
The one-dimensional asymmetric simple-exclusion model with open boundaries for parallel update is extended to take into account temporary stopping of particles. The model presents the traffic flow on a highway with temporary deceleration of cars. Introducing temporary stopping into the asymmetric simple-exclusion model drives the system asymptotically into a steady state exhibiting a self-organized criticality. In the self-organized critical state, start-stop waves (or traffic jams) appear with various sizes (or lifetimes). The typical interval < s>between consecutive jams scales as < s> ≃ Lv with v = 0.51 ± 0.05 where L is the system size. It is shown that the cumulative jam-interval distribution Ns( L) satisfies the finite-size scaling form ( Ns( L) ≃ L- vf( s/ Lv). Also, the typical lifetime
Body mass index and body composition scaling to height in children and adolescent.
Chung, Sochung
2015-09-01
Childhood obesity prevalence has been increased and known to be related to various diseases and mortality in adult and body mass index (BMI) has been widely used as a screening tool in children with obesity. It is important to understand what BMI is and its limitations. BMI is a measure of weight adjusted for height. Weight scales to height with a power of about 2, is the basis of BMI (weight/height(2)) as the scaling of body weight to height across adults provides powers rounded to 2. BMI has the advantage of a simple and noninvasive surrogate measure of body fat, but it has limitation in differentiating body fat from lean (fat free) mass and low-moderate sensitivity is problematic for clinical applications. Among overweight children higher BMI levels can be a result of increased either fat or fat-free mass. BMI could be divided into fat-free mass index and fat mass index. Monitoring of the changes in body composition is important as distinguishing changes in each component occur with rapid growth in adolescents as it is occur in concert with changes in the hormonal environment. Reference values for each body composition indexes and chart created with selected percentiles of a normal adolescent population could be helpful in growth assessment and health risk evaluation.
Accuracy of recumbent height measurement.
Gray, D S; Crider, J B; Kelley, C; Dickinson, L C
1985-01-01
Since many patients requiring specialized nutritional support are bedridden, measurement of height for purposes of nutritional assessment or prescription must often be done with the patient in bed. This study examined the accuracy of measuring body height in bed in the supine position. Two measurements were performed on 108 ambulatory inpatients: (1) standing height using a standard height-weight scale, and (2) bed height using a flexible tape. Patients were divided into four groups based on which of two researchers performed each of the two measurements. Each patient was also weighed and self-reported height, weight, sex, and age were recorded. Bed height was significantly longer than standing height by 3.68 cm, but the two measurements were equally precise. It was believed, however, that this 2% difference was probably not clinically significant in most circumstances. Bed height correlated highly with standing height (r = 0.95), and the regression equation was standing height = 13.82 +/- 0.09 bed height. Patients overestimated their heights. Heights recorded by nurses were more accurate when patients were measured than when asked about their heights, but the patients were more often asked than measured.
Adjacent-Categories Mokken Models for Rater-Mediated Assessments
Wind, Stefanie A.
2016-01-01
Molenaar extended Mokken’s original probabilistic-nonparametric scaling models for use with polytomous data. These polytomous extensions of Mokken’s original scaling procedure have facilitated the use of Mokken scale analysis as an approach to exploring fundamental measurement properties across a variety of domains in which polytomous ratings are used, including rater-mediated educational assessments. Because their underlying item step response functions (i.e., category response functions) are defined using cumulative probabilities, polytomous Mokken models can be classified as cumulative models based on the classifications of polytomous item response theory models proposed by several scholars. In order to permit a closer conceptual alignment with educational performance assessments, this study presents an adjacent-categories variation on the polytomous monotone homogeneity and double monotonicity models. Data from a large-scale rater-mediated writing assessment are used to illustrate the adjacent-categories approach, and results are compared with the original formulations. Major findings suggest that the adjacent-categories models provide additional diagnostic information related to individual raters’ use of rating scale categories that is not observed under the original formulation. Implications are discussed in terms of methods for evaluating rating quality. PMID:29795916
Li, Ainong; Huang, Chengquan; Sun, Guoqing; Shi, Hua; Toney, Chris; Zhu, Zhiliang; Rollins, Matthew G.; Goward, Samuel N.; Masek, Jeffery G.
2011-01-01
Many forestry and earth science applications require spatially detailed forest height data sets. Among the various remote sensing technologies, lidar offers the most potential for obtaining reliable height measurement. However, existing and planned spaceborne lidar systems do not have the capability to produce spatially contiguous, fine resolution forest height maps over large areas. This paper describes a Landsat–lidar fusion approach for modeling the height of young forests by integrating historical Landsat observations with lidar data acquired by the Geoscience Laser Altimeter System (GLAS) instrument onboard the Ice, Cloud, and land Elevation (ICESat) satellite. In this approach, “young” forests refer to forests reestablished following recent disturbances mapped using Landsat time-series stacks (LTSS) and a vegetation change tracker (VCT) algorithm. The GLAS lidar data is used to retrieve forest height at sample locations represented by the footprints of the lidar data. These samples are used to establish relationships between lidar-based forest height measurements and LTSS–VCT disturbance products. The height of “young” forest is then mapped based on the derived relationships and the LTSS–VCT disturbance products. This approach was developed and tested over the state of Mississippi. Of the various models evaluated, a regression tree model predicting forest height from age since disturbance and three cumulative indices produced by the LTSS–VCT method yielded the lowest cross validation error. The R2 and root mean square difference (RMSD) between predicted and GLAS-based height measurements were 0.91 and 1.97 m, respectively. Predictions of this model had much higher errors than indicated by cross validation analysis when evaluated using field plot data collected through the Forest Inventory and Analysis Program of USDA Forest Service. Much of these errors were due to a lack of separation between stand clearing and non-stand clearing disturbances in current LTSS–VCT products and difficulty in deriving reliable forest height measurements using GLAS samples when terrain relief was present within their footprints. In addition, a systematic underestimation of about 5 m by the developed model was also observed, half of which could be explained by forest growth that occurred between field measurement year and model target year. The remaining difference suggests that tree height measurements derived using waveform lidar data could be significantly underestimated, especially for young pine forests. Options for improving the height modeling approach developed in this study were discussed.
NASA Technical Reports Server (NTRS)
Li, Ainong; Huang, Chengquan; Sun, Guoqing; Shi, Hua; Toney, Chris; Zhu, Zhiliang; Rollins, Matthew G.; Goward, Samuel N.; Masek, Jeffrey G.
2011-01-01
Many forestry and earth science applications require spatially detailed forest height data sets. Among the various remote sensing technologies, lidar offers the most potential for obtaining reliable height measurement. However, existing and planned spaceborne lidar systems do not have the capability to produce spatially contiguous, fine resolution forest height maps over large areas. This paper describes a Landsat-lidar fusion approach for modeling the height of young forests by integrating historical Landsat observations with lidar data acquired by the Geoscience Laser Altimeter System (GLAS) instrument onboard the Ice, Cloud, and land Elevation (ICESat) satellite. In this approach, "young" forests refer to forests reestablished following recent disturbances mapped using Landsat time-series stacks (LTSS) and a vegetation change tracker (VCT) algorithm. The GLAS lidar data is used to retrieve forest height at sample locations represented by the footprints of the lidar data. These samples are used to establish relationships between lidar-based forest height measurements and LTSS-VCT disturbance products. The height of "young" forest is then mapped based on the derived relationships and the LTSS-VCT disturbance products. This approach was developed and tested over the state of Mississippi. Of the various models evaluated, a regression tree model predicting forest height from age since disturbance and three cumulative indices produced by the LTSS-VCT method yielded the lowest cross validation error. The R(exp 2) and root mean square difference (RMSD) between predicted and GLAS-based height measurements were 0.91 and 1.97 m, respectively. Predictions of this model had much higher errors than indicated by cross validation analysis when evaluated using field plot data collected through the Forest Inventory and Analysis Program of USDA Forest Service. Much of these errors were due to a lack of separation between stand clearing and non-stand clearing disturbances in current LTSS-VCT products and difficulty in deriving reliable forest height measurements using GLAS samples when terrain relief was present within their footprints. In addition, a systematic underestimation of about 5 m by the developed model was also observed, half of which could be explained by forest growth that occurred between field measurement year and model target year. The remaining difference suggests that tree height measurements derived using waveform lidar data could be significantly underestimated, especially for young pine forests. Options for improving the height modeling approach developed in this study were discussed.
Evidence for criticality in financial data
NASA Astrophysics Data System (ADS)
Ruiz, G.; de Marcos, A. F.
2018-01-01
We provide evidence that cumulative distributions of absolute normalized returns for the 100 American companies with the highest market capitalization, uncover a critical behavior for different time scales Δt. Such cumulative distributions, in accordance with a variety of complex - and financial - systems, can be modeled by the cumulative distribution functions of q-Gaussians, the distribution function that, in the context of nonextensive statistical mechanics, maximizes a non-Boltzmannian entropy. These q-Gaussians are characterized by two parameters, namely ( q, β), that are uniquely defined by Δt. From these dependencies, we find a monotonic relationship between q and β, which can be seen as evidence of criticality. We numerically determine the various exponents which characterize this criticality.
Timmons, Shelly D; Bee, Tiffany; Webb, Sharon; Diaz-Arrastia, Ramon R; Hesdorffer, Dale
2011-11-01
Prediction of outcome after traumatic brain injury (TBI) remains elusive. We tested the use of a single hospital Glasgow Coma Scale (GCS) Score, GCS Motor Score, and the Head component of the Abbreviated Injury Scale (AIS) Score to predict 2-week cumulative mortality in a large cohort of TBI patients admitted to the eight U.S. Level I trauma centers in the TBI Clinical Trials Network. Data on 2,808 TBI patients were entered into a centralized database. These TBI patients were categorized as severe (GCS score, 3-8), moderate (9-12), or complicated mild (13-15 with positive computed tomography findings). Intubation and chemical paralysis were recorded. The cumulative incidence of mortality in the first 2 weeks after head injury was calculated using Kaplan-Meier survival analysis. Cox proportional hazards regression was used to estimate the magnitude of the risk for 2-week mortality. Two-week cumulative mortality was independently predicted by GCS, GCS Motor Score, and Head AIS. GCS Severity Category and GCS Motor Score were stronger predictors of 2-week mortality than Head AIS. There was also an independent effect of age (<60 vs. ≥60) on mortality after controlling for both GCS and Head AIS Scores. Anatomic and physiologic scales are useful in the prediction of mortality after TBI. We did not demonstrate any added benefit to combining the total GCS or GCS Motor Scores with the Head AIS Score in the short-term prediction of death after TBI.
Microgravity Propellant Tank Geyser Analysis and Prediction
NASA Technical Reports Server (NTRS)
Thornton, Randall J.; Hochstein, John I.; Turner, James E. (Technical Monitor)
2001-01-01
An established correlation for geyser height prediction of an axial jet inflow into a microgravity propellant tank was analyzed and an effort to develop an improved correlation was made. The original correlation, developed using data from ethanol flow in small-scale drop tower tests, uses the jet-Weber number and the jet-Bond number to predict geyser height. A new correlation was developed from the same set of experimental data using the jet-Weber number and both the jet-Bond number and tank-Bond number to describe the geyser formation. The resulting correlation produced nearly a 40% reduction in geyser height predictive error compared to the original correlation with experimental data. Two additional tanks were computationally modeled in addition to the small-scale tank used in the drop tower testing. One of these tanks was a 50% enlarged small-scale tank and the other a full-scale 2 m radius tank. Simulations were also run for liquid oxygen and liquid hydrogen. Results indicated that the new correlation outperformed the original correlation in geyser height prediction under most circumstances. The new correlation has also shown a superior ability to recognize the difference between flow patterns II (geyser formation only) and III (pooling at opposite end of tank from the bulk fluid region).
Importance of curvature evaluation scale for predictive simulations of dynamic gas-liquid interfaces
NASA Astrophysics Data System (ADS)
Owkes, Mark; Cauble, Eric; Senecal, Jacob; Currie, Robert A.
2018-07-01
The effect of the scale used to compute the interfacial curvature on the prediction of dynamic gas-liquid interfaces is investigated. A new interface curvature calculation methodology referred to herein as the Adjustable Curvature Evaluation Scale (ACES) is proposed. ACES leverages a weighted least squares regression to fit a polynomial through points computed on the volume-of-fluid representation of the gas-liquid interface. The interface curvature is evaluated from this polynomial. Varying the least squares weight with distance from the location where the curvature is being computed, adjusts the scale the curvature is evaluated on. ACES is verified using canonical static test cases and compared against second- and fourth-order height function methods. Simulations of dynamic interfaces, including a standing wave and oscillating droplet, are performed to assess the impact of the curvature evaluation scale for predicting interface motions. ACES and the height function methods are combined with two different unsplit geometric volume-of-fluid (VoF) schemes that define the interface on meshes with different levels of refinement. We find that the results depend significantly on curvature evaluation scale. Particularly, the ACES scheme with a properly chosen weight function is accurate, but fails when the scale is too small or large. Surprisingly, the second-order height function method is more accurate than the fourth-order variant for the dynamic tests even though the fourth-order method performs better for static interfaces. Comparing the curvature evaluation scale of the second- and fourth-order height function methods, we find the second-order method is closer to the optimum scale identified with ACES. This result suggests that the curvature scale is driving the accuracy of the dynamics. This work highlights the importance of studying numerical methods with realistic (dynamic) test cases and that the interactions of the various discretizations is as important as the accuracy of one part of the discretization.
Rasiah, Rajah; Thangiah, Govindamal; Yusoff, Khalid; Manikam, Rishya; Chandrasekaran, Sankara Kumar; Mustafa, Rujhan; Bakar, Najmin Binti Abu
2015-12-16
Numerous studies have shown the importance of physical activity in reducing the morbidity and mortality rates caused by cardiovascular disease (CVD). However, most of these studies emphasise little on the cumulative effect of CVD risk factors. Hence, this study investigates the association between physical exercise and cumulative CVD risk factors among adults in three different age groups. Using a sample of 7276 respondents drawn from community centers, the REDISCOVER team gathered information on physical activity, CVD risk factors (obesity, diabetes, hypertension, hypercholesterolemia, tobacco use) and socioeconomic and demographic variables in Malaysia. Because the study required medical examination, a convenience sampling frame was preferred in which all volunteers were included in the study. Fasting blood samples and anthropometric (height, weight and more) measurements were collected by trained staffs. Socio-demographic and physical activity variables were recorded through questionnaires. A Chi-square test was performed to identify the bivariate association between the covariates (socioeconomic variables, demographic variables and physical activity) and outcome variable. The association between the main exposure, physical activity, and the outcome variable, cumulative CVD risk factors, was assessed using an ordinal logistic regression model, controlling for socioeconomic status and demographic influences in three different age groups, 35-49, 50-64 and 65 and above. The mean age of participants is 51.8 (SD = 9.4). Respondents in the age groups of 35-49 (aORmoderate = 0.12; 95 % CI: 0.02 - 0.53 ) and 65 and above (aORhigh = 0.58; 95 % CI: 0.24, 0.78) showed a statistically significant inverse relationship between physical activity and cumulative CVD risk factors. However, this relationship was not significant among respondents in the 50-64 age group suggesting the possible influence of other variables, such as stress and environment. The statistically significant results show a negative association between physical exercise and cumulative CVD risk factors. However, the lack of a significant relationship in the 50-64 age group suggests the need to include other considerations in future studies, such as stress and environment.
Cumulative Effect of Obesogenic Behaviours on Adiposity in Spanish Children and Adolescents
Schröder, Helmut; Bawaked, Rowaedh Ahmed; Ribas-Barba, Lourdes; Izquierdo-Pulido, Maria; Roman-Viñas, Blanca; Fíto, Montserrat; Serra-Majem, Lluis
2018-01-01
Objective Little is known about the cumulative effect of obesogenic behaviours on childhood obesity risk. We determined the cumulative effect on BMI z-score, waist-to-height ratio (WHtR), overweight and abdominal obesity of four lifestyle behaviours that have been linked to obesity. Methods In this cross-sectional analysis, data were obtained from the EnKid sudy, a representative sample of Spanish youth. The study included 1,614 boys and girls aged 5-18 years. Weight, height and waist circumference were measured. Physical activity (PA), screen time, breakfast consumption and meal frequency were self-reported on structured questionnaires. Obesogenic behaviours were defined as <1 h PA/day, ≥2 h/day screen time, skipping breakfast and <3 meals/day. BMI z-score was computed using age- and sex-specific reference values from the World Health Organization (WHO). Overweight including obesity was defined as a BMI > 1 SD from the mean of the WHO reference population. Abdominal obesity was defined as a WHtR ≥ 0.5. Results High screen time was the most prominent obesogenic behaviour (49.7%), followed by low physical activity (22.4%), low meal frequency (14.4%), and skipping breakfast (12.5%). Although 33% of participants were free of all 4 obesogenic behaviours, 1, 2, and 3 or 4 behaviours were reported by 44.5%, 19.3%, and 5.0%, respectively. BMI z-score and WHtR were positively associated (p < 0.001) with increasing numbers of concurrent obesogenic behaviours. The odds of presenting with obesogenic behaviours were significantly higher in children who were overweight (OR 2.68; 95% CI 1.50; 4.80) or had abdominal obesity (OR 2.12; 95% CI 1.28; 3.52); they reported more than 2 obesogenic behaviours. High maternal and parental education was inversely associated (p = 0.004 and p < 0.001, respectively) with increasing presence of obesogenic behaviours. Surrogate markers of adiposity increased with numbers of concurrent presence of obesogenic behaviours. The opposite was true for high maternal and paternal education. PMID:29207394
NASA Astrophysics Data System (ADS)
Paugam, R.; Wooster, M.; Freitas, S.; Martin, M. Val
2016-01-01
Landscape fires produce smoke containing a very wide variety of chemical species, both gases and aerosols. For larger, more intense fires that produce the greatest amounts of emissions per unit time, the smoke tends initially to be transported vertically or semi-vertically close by the source region, driven by the intense heat and convective energy released by the burning vegetation. The column of hot smoke rapidly entrains cooler ambient air, forming a rising plume within which the fire emissions are transported. The characteristics of this plume, and in particular the height to which it rises before releasing the majority of the smoke burden into the wider atmosphere, are important in terms of how the fire emissions are ultimately transported, since for example winds at different altitudes may be quite different. This difference in atmospheric transport then may also affect the longevity, chemical conversion, and fate of the plumes chemical constituents, with for example very high plume injection heights being associated with extreme long-range atmospheric transport. Here we review how such landscape-scale fire smoke plume injection heights are represented in larger-scale atmospheric transport models aiming to represent the impacts of wildfire emissions on component of the Earth system. In particular we detail (i) satellite Earth observation data sets capable of being used to remotely assess wildfire plume height distributions and (ii) the driving characteristics of the causal fires. We also discuss both the physical mechanisms and dynamics taking place in fire plumes and investigate the efficiency and limitations of currently available injection height parameterizations. Finally, we conclude by suggesting some future parameterization developments and ideas on Earth observation data selection that may be relevant to the instigation of enhanced methodologies aimed at injection height representation.
Quantitative analysis of scale of aeromagnetic data raises questions about geologic-map scale
Nykanen, V.; Raines, G.L.
2006-01-01
A recently published study has shown that small-scale geologic map data can reproduce mineral assessments made with considerably larger scale data. This result contradicts conventional wisdom about the importance of scale in mineral exploration, at least for regional studies. In order to formally investigate aspects of scale, a weights-of-evidence analysis using known gold occurrences and deposits in the Central Lapland Greenstone Belt of Finland as training sites provided a test of the predictive power of the aeromagnetic data. These orogenic-mesothermal-type gold occurrences and deposits have strong lithologic and structural controls associated with long (up to several kilometers), narrow (up to hundreds of meters) hydrothermal alteration zones with associated magnetic lows. The aeromagnetic data were processed using conventional geophysical methods of successive upward continuation simulating terrane clearance or 'flight height' from the original 30 m to an artificial 2000 m. The analyses show, as expected, that the predictive power of aeromagnetic data, as measured by the weights-of-evidence contrast, decreases with increasing flight height. Interestingly, the Moran autocorrelation of aeromagnetic data representing differing flight height, that is spatial scales, decreases with decreasing resolution of source data. The Moran autocorrelation coefficient scems to be another measure of the quality of the aeromagnetic data for predicting exploration targets. ?? Springer Science+Business Media, LLC 2007.
Cumulative exposure to traumatic events in older adults.
Ogle, Christin M; Rubin, David C; Siegler, Ilene C
2014-01-01
The present study examined the impact of cumulative trauma exposure on current posttraumatic stress disorder (PTSD) symptom severity in a nonclinical sample of adults in their 60s. The predictive utility of cumulative trauma exposure was compared to other known predictors of PTSD, including trauma severity, personality traits, social support, and event centrality. Community-dwelling adults (n = 2515) from the crest of the Baby Boom generation completed the Traumatic Life Events Questionnaire, the PTSD Checklist, the NEO Personality Inventory, the Centrality of Event Scale, and rated their current social support. Cumulative trauma exposure predicted greater PTSD symptom severity in hierarchical regression analyses consistent with a dose-response model. Neuroticism and event centrality also emerged as robust predictors of PTSD symptom severity. In contrast, the severity of individuals' single most distressing life event, as measured by self-report ratings of the A1 PTSD diagnostic criterion, did not add explanatory variance to the model. Analyses concerning event categories revealed that cumulative exposure to childhood violence and adulthood physical assaults were most strongly associated with PTSD symptom severity in older adulthood. Moreover, cumulative self-oriented events accounted for a larger percentage of variance in symptom severity compared to events directed at others. Our findings suggest that the cumulative impact of exposure to traumatic events throughout the life course contributes significantly to posttraumatic stress in older adulthood above and beyond other known predictors of PTSD.
Joly, François-Xavier; Kurupas, Kelsey L; Throop, Heather L
2017-09-01
Macroclimate has traditionally been considered the predominant driver of litter decomposition. However, in drylands, cumulative monthly or annual precipitation typically fails to predict decomposition. In these systems, the windows of opportunity for decomposer activity may rather depend on the precipitation frequency and local factors affecting litter desiccation, such as soil-litter mixing. We used a full-factorial microcosm experiment to disentangle the relative importance of cumulative precipitation, pulse frequency, and soil-litter mixing on litter decomposition. Decomposition, measured as litter carbon loss, saturated with increasing cumulative precipitation when pulses were large and infrequent, suggesting that litter moisture no longer increased and/or microbial activity was no longer limited by water availability above a certain pulse size. More frequent precipitation pulses led to increased decomposition at high levels of cumulative precipitation. Soil-litter mixing consistently increased decomposition, with greatest relative increase (+194%) under the driest conditions. Collectively, our results highlight the need to consider precipitation at finer temporal scale and incorporate soil-litter mixing as key driver of decomposition in drylands. © 2017 by the Ecological Society of America.
Cumulant expansions for measuring water exchange using diffusion MRI
NASA Astrophysics Data System (ADS)
Ning, Lipeng; Nilsson, Markus; Lasič, Samo; Westin, Carl-Fredrik; Rathi, Yogesh
2018-02-01
The rate of water exchange across cell membranes is a parameter of biological interest and can be measured by diffusion magnetic resonance imaging (dMRI). In this work, we investigate a stochastic model for the diffusion-and-exchange of water molecules. This model provides a general solution for the temporal evolution of dMRI signal using any type of gradient waveform, thereby generalizing the signal expressions for the Kärger model. Moreover, we also derive a general nth order cumulant expansion of the dMRI signal accounting for water exchange, which has not been explored in earlier studies. Based on this analytical expression, we compute the cumulant expansion for dMRI signals for the special case of single diffusion encoding (SDE) and double diffusion encoding (DDE) sequences. Our results provide a theoretical guideline on optimizing experimental parameters for SDE and DDE sequences, respectively. Moreover, we show that DDE signals are more sensitive to water exchange at short-time scale but provide less attenuation at long-time scale than SDE signals. Our theoretical analysis is also validated using Monte Carlo simulations on synthetic structures.
DOT National Transportation Integrated Search
2013-03-01
Current TxDOT practice allows installation of all existing chevron sizes on 7-ft mounting height, but restricts the use of 4-ft mounting height for the three smallest existing chevron signsthat is, 12 inches 18 inches, 18 inches 24 inches, a...
Effect of homophily on network formation
NASA Astrophysics Data System (ADS)
Kim, Kibae; Altmann, Jörn
2017-03-01
Although there is much research on network formation based on the preferential attachment rule, the research did not come up with a formula that, on the one hand, can reproduce shapes of cumulative degree distributions of empirical complex networks and, on the other hand, can represent intuitively theories on individual behavior. In this paper, we propose a formula that closes this gap by integrating into the formula for the preferential attachment rule (i.e., a node with higher degree is more likely to gain a new link) a representation of the theory of individual behavior with respect to nodes preferring to connect to other nodes with similar attributes (i.e., homophily). Based on this formula, we simulate the shapes of cumulative degree distributions for different levels of homophily and five different seed networks. Our simulation results suggest that homophily and the preferential attachment rule interact for all five types of seed networks. Surprisingly, the resulting cumulative degree distribution in log-log scale always shifts from a concave shape to a convex shape, as the level of homophily gets larger. Therefore, our formula can explain intuitively why some of the empirical complex networks show a linear cumulative degree distribution in log-log scale while others show either a concave or convex shape. Furthermore, another major finding indicates that homophily makes people of a group richer than people outside this group, which is a surprising and significant finding.
Effect of Surface Roughness on Characteristics of Spherical Shock Waves
NASA Technical Reports Server (NTRS)
Huber, Paul W.; McFarland, Donald R.
1959-01-01
Measurements of peak overpressure and Mach stem height were made at four burst heights. Data were obtained with instrumentation capable of directly observing the variation of shock wave movement with time. Good similarity of free air shock peak overpressure with larger scale data was found to exist. The net effect of surface roughness on shock peak overpressures slightly. Surface roughness delayed the Mach stem formation at the greatest charge height and lowered the growth at all burst heights. A similarity parameter was found which approximately correlates the triple point path at different burst heights.
Ball, Murray A; Noble, Bram F; Dubé, Monique G
2013-07-01
The accumulating effects of human development are threatening water quality and availability. In recognition of the constraints to cumulative effects assessment (CEA) under traditional environmental impact assessment (EIA), there is an emerging body of research dedicated to watershed-based cumulative effects assessment (WCEA). To advance the science of WCEA, however, a standard set of ecosystem components and indicators is required that can be used at the watershed scale, to inform effects-based understanding of cumulative change, and at the project scale, to inform regulatory-based project based impact assessment and mitigation. A major challenge, however, is that it is not clear how such ecosystem components and indicators for WCEA can or should be developed. This study examined the use of aquatic ecosystem components and indicators in EIA practice in the South Saskatchewan River watershed, Canada, to determine whether current practice at the project scale could be "scaled up" to support ecosystem component and indicator development for WCEA. The hierarchy of assessment components and indicators used in a sample of 35 environmental impact assessments was examined and the factors affecting aquatic ecosystem component selection and indicator use were identified. Results showed that public environmental impact statements are not necessarily publically accessible, thus limiting opportunities for data and information sharing from the project to the watershed scale. We also found no consistent terminology across the sample of impact statements, thus making comparison of assessment processes and results difficult. Regulatory compliance was found to be the dominant factor influencing the selection of ecosystem components and indicators for use in project assessment, rather than scientific reasoning, followed by the mandate of the responsible government agency for the assessment, public input to the assessment process, and preexisting water licensing arrangements external to the assessment process. The current approach to project-based assessment offered little support for WCEA initiatives. It did not provide a standard set of aquatic ecosystem components and indicators or allow the sharing of information across projects and from the project to the watershed scale. We suggest that determining priority assessment parameters for WCEA requires adoption of a standardized framework of component and indicator terminology, which can then be populated for the watershed of concern based on both watershed-based priorities and project-specific regulatory requirements. Copyright © 2012 SETAC.
Long-term research and monitoring of conservation practice effects in Iowa watersheds
USDA-ARS?s Scientific Manuscript database
Impacts of conservation practices on water quality can be demonstrated at the plot and field scales in research or on-farm settings. Watershed-scale monitoring is often used to examine the cumulative effects of conservation practice implementation for that drainage area. The Upper Mississippi River ...
Effect of enhanced manganese oxidation in the hyporheic zone on basin-scale geochemical mass balance
Harvey, Judson W.; Fuller, Christopher C.
1998-01-01
We determined the role of the hyporheic zone (the subsurface zone where stream water and shallow groundwater mix) in enhancing microbially mediated oxidation of dissolved manganese (to form manganese precipitates) in a drainage basin contaminated by copper mining. The fate of manganese is of overall importance to water quality in Pinal Creek Basin, Arizona, because manganese reactions affect the transport of trace metals. The basin-scale role of the hyporheic zone is difficult to quantify because stream-tracer studies do not always reliably characterize the cumulative effects of the hyporheic zone. This study determined cumulative effects of hyporheic reactions in Pinal Creek basin by characterizing manganese uptake at several spatial scales (stream-reach scale, hyporheic-flow-path scale, and sediment-grain scale). At the stream-reach scale a one-dimensional stream-transport model (including storage zones to represent hyporheic flow paths) was used to determine a reach-averaged time constant for manganese uptake in hyporheic zones, 1/λs, of 1.3 hours, which was somewhat faster but still similar to manganese uptake time constants that were measured directly in centimeter-scale hyporheic flow paths (1/λh= 2.6 hours), and in laboratory batch experiments using streambed sediment (1/λ = 2.7 hours). The modeled depths of subsurface storage zones (ds = 4–17 cm) and modeled residence times of water in storage zones (ts = 3–12 min) were both consistent with direct measurements in hyporheic flow paths (dh = 0–15 cm, th = 1–25 min). There was also good agreement between reach-scale modeling and direct measurements of the percentage removal of dissolved manganese in hyporheic flow paths (fs = 8.9%, andfh = 9.3%rpar;. Manganese uptake experiments in the laboratory using sediment from Pinal Creek demonstrated (through comparison of poisoned and unpoisoned treatments) that the manganese removal process was enhanced by microbially mediated oxidation. The cumulative effect of hyporheic exchange in Pinal Creek basin was to remove approximately 20% of the dissolved manganese flowing out of the drainage basin. Our results illustrate that the cumulative significance of reactive uptake in the hyporheic zone depends on the balance between chemical reaction rates, hyporheic porewater residence time, and turnover of streamflow through hyporheic flow paths. The similarity between the hyporheic reaction timescale (1/λs ≈ 1.3 hours), and the hyporheic porewater residence timescale (ts ≈ 8 min) ensured that there was adequate time for the reaction to progress. Furthermore, it was the similarity between the turnover length for stream water flow through hyporheic flow paths (Ls = stream velocity/storage-zone exchange coefficient ≈ 1.3 km) and the length of Pinal Creek (L ≈ 7 km), which ensured that all stream water passed through hyporheic flow paths several times. As a means to generalize our findings to other sites where similar types of hydrologic and chemical information are available, we suggest a cumulative significance index for hyporheic reactions, Rs = λstsL/Ls (dimensionless); higher values indicate a greater potential for hyporheic reactions to influence geochemical mass balance. Our experience in Pinal Creek basin suggests that values of Rs > 0.2 characterize systems where hyporheic reactions are likely to influence geochemical mass balance at the drainage-basin scale.
Scaling depth-induced wave-breaking in two-dimensional spectral wave models
NASA Astrophysics Data System (ADS)
Salmon, J. E.; Holthuijsen, L. H.; Zijlema, M.; van Vledder, G. Ph.; Pietrzak, J. D.
2015-03-01
Wave breaking in shallow water is still poorly understood and needs to be better parameterized in 2D spectral wave models. Significant wave heights over horizontal bathymetries are typically under-predicted in locally generated wave conditions and over-predicted in non-locally generated conditions. A joint scaling dependent on both local bottom slope and normalized wave number is presented and is shown to resolve these issues. Compared to the 12 wave breaking parameterizations considered in this study, this joint scaling demonstrates significant improvements, up to ∼50% error reduction, over 1D horizontal bathymetries for both locally and non-locally generated waves. In order to account for the inherent differences between uni-directional (1D) and directionally spread (2D) wave conditions, an extension of the wave breaking dissipation models is presented. By including the effects of wave directionality, rms-errors for the significant wave height are reduced for the best performing parameterizations in conditions with strong directional spreading. With this extension, our joint scaling improves modeling skill for significant wave heights over a verification data set of 11 different 1D laboratory bathymetries, 3 shallow lakes and 4 coastal sites. The corresponding averaged normalized rms-error for significant wave height in the 2D cases varied between 8% and 27%. In comparison, using the default setting with a constant scaling, as used in most presently operating 2D spectral wave models, gave equivalent errors between 15% and 38%.
Lava flow topographic measurements for radar data interpretation
NASA Technical Reports Server (NTRS)
Campbell, Bruce A.; Garvin, James B.
1993-01-01
Topographic profiles at 25- and 5-cm horizontal resolution for three sites along a lava flow on Kilauea Volcano are presented, and these data are used to illustrate techniques for surface roughness analysis. Height and slope distributions and the height autocorrelation function are evaluated as a function of varying lowpass filter wavelength for the 25-cm data. Rms slopes are found to increase rapidly with decreasing topographic scale and are typically much higher than those found by modeling of Magellan altimeter data for Venus. A more robust description of the surface roughness appears to be the ratio of rms height to surface height correlation length. For all three sites this parameter falls within the range of values typically found from model fits to Magellan altimeter waveforms. The 5-cm profile data are used to estimate the effect of small-scale roughness on quasi-specular scattering.
Augestad, Knut M; Keller, Deborah S; Bakaki, Paul M; Rose, Johnie; Koroukian, Siran M; Øresland, Tom; Delaney, Conor P
2018-04-01
The impact of rectal cancer tumor height on local recurrence and metastatic spread is unknown. The objective was to evaluate the impact of rectal cancer tumor height from the anal verge on metastatic spread and local recurrence patterns. The Norwegian nationwide surgical quality registry was reviewed for curative rectal cancer resections from 1/1/1996-12/15/2006. Cancers were stratified into five height groups: 0-3 cm, >3-5 cm, >5-9 cm, >9-12 cm, 12 cm-HI. Competing risk and proportional hazards models assessed the relationship between tumor height and patterns of metastasis and survival. 6859 patients were analyzed. After median follow-up of 52 months (IQR 20-96), 26.7% (n = 1835) experienced recurrence. With tumors >12 cm, the risk of liver metastases increased (crude HR 1.49, p = 0.03), while lung metastases decreased (crude HR 0.66, p = 0.03), and risk of death decreased (crude HR 0.81, p = 0.001) The cumulative incidence of pelvic recurrence were highest for the low tumors (p = 0.01). Median time to liver metastases was 14months (IQR 7-24), lung metastases 25months (IQR 13-39), pelvic recurrence 19months (IQR10-32), (p < 0.0001). Time to metastases in liver and lungs were significantly associated with tumor height (p < 0.001) CONCLUSION: There are distinct differences in metastatic recurrence patterns and time to recurrence from different anatomic areas of the rectum. In crude analyses, tumor height impacted metastatic spread to the liver and lungs. However, when adjusting for treatment variables, the hazard of metastatic spread to the liver and lungs are limited. Nevertheless, time to metastases in liver and lungs is significantly impacted by tumor height. Venous drainage of the rectal cancer may be a significant contributor of rectal cancer metastatic spread, but further research is warranted. Copyright © 2018 Elsevier Ltd. All rights reserved.
NASA Astrophysics Data System (ADS)
Schmidt, Max W.; Forien, Melanie; Solferino, Giulio; Bagdassarov, Nickolai
2012-12-01
A series of centrifuge-assisted settling experiments of 30 vol % olivine in 70 vol % basaltic melt was conducted to elucidate the formation mechanisms and time scales of gravitational cumulates. The settling experiments were performed in a centrifuging piston cylinder at 200-1,500 g, 1,270-1,280 °C, and 0.8-1.1 GPa on previously annealed and texturally equilibrated samples. The mechanical settling of the dense olivine suspension occurs at about 1/6 the speed of simple Stokes settling, resulting in a sedimentation exponent n = 4.1(6) in agreement with predictions from analogue systems. The porosity (φ m ) of the orthocumulate resulting from gravitational settling of crystals is about 54 % and formation times of olivine orthocumulates result to 0.1-10 m day-1 (for an initial crystal content of the melt of 1-5 % and grain sizes of 2-10 mm). After mechanical settling, olivine grains rest on each other, and further compaction occurs through pressure dissolution at grain contacts, olivine reprecipitation where olivine is in contact with melt, and concomitant expulsion of excess liquid from the cumulate layer. With centrifugation at 400 g for 50 h, porosities as low as 30.3 vol % were achieved. The olivine content at the bottom of the gravitational cumulate is 1 - φm ~ log(Δρ · h · a · t), where Δρ is the density difference between crystals and melt, h the crystal layer thickness, a the acceleration, and t the time of centrifuging. Compaction is hence proportional to effective stress integrated over time indicating that pressure dissolution is the dominant mechanism for chemical compaction. The compaction limit, that is the lowermost porosity to be reached by this mechanism, is calculated by equating the lithostatic and hydraulic pressure gradients in the cumulate and results to 3-5 % porosity for the experiments. Crystal size distribution curves and a growth exponent n of 3.1(3) indicate that diffusion-controlled Ostwald ripening is the dominant crystal growth mechanism. The above relationship, combined with a linear scaling for grain size as appropriate for reaction-controlled pressure solution creep, allows calculation of formation times of adcumulates. If chemical compaction is dissolution-reprecipitation limited, then single layers of natural olivine adcumulates of ½ m thickness with 70-75 vol % olivine at the base (as observed in the Rhum layered intrusion) would have typical formation times of 0.4-3 years for grain sizes of 2-10 mm. This time scale compares favourably with characteristic cooling times of sills. If a greater than 20-m-thick series of cumulate layers pressurizes a base layer with the porosity still filled by a melt, then compaction proceeds to the compaction limit within a few years. It can thus be expected that in layered mafic intrusions where cumulates are continuously deposited from a large magma chamber and which characteristic cooling times of more than decades, a compaction zone of several tens of metres forms with adcumulates only maintaining porosities in the order of 5 %. In conclusion, gravitational settling and gravitation-driven chemical compaction are feasible cumulate-forming processes for dense mafic minerals in basaltic magmas and in particular in large layered intrusions.
NASA Astrophysics Data System (ADS)
Forni, Francesca; Petricca, Eleonora; Bachmann, Olivier; Mollo, Silvio; De Astis, Gianfilippo; Piochi, Monica
2018-06-01
Understanding the mechanisms responsible for the generation of chemical gradients in high-volume ignimbrites is key to retrieve information on the processes that control the maturation and eruption of large silicic magmatic reservoirs. Over the last 60 ky, two large ignimbrites showing remarkable zoning were emplaced during caldera-forming eruptions at Campi Flegrei (i.e., Campanian Ignimbrite, CI, 39 ka and Neapolitan Yellow Tuff, NYT, 15 ka). While the CI displays linear compositional, thermal and crystallinity gradients, the NYT is a more complex ignimbrite characterized by crystal-poor magmas ranging in composition from trachy-andesites to phonolites. By combining major and trace element compositions of matrix glasses and mineral phases from juvenile clasts located at different stratigraphic heights along the NYT pyroclastic sequence, we interpret such compositional gradients as the result of mixing/mingling between three different magmas: (1) a resident evolved magma showing geochemical characteristics of a melt extracted from a cumulate mush dominated by clinopyroxene, plagioclase and oxides with minor sanidine and biotite; (2) a hotter and more mafic magma from recharge providing high-An plagioclase and high-Mg clinopyroxene crystals and (3) a compositionally intermediate magma derived from remelting of low temperature mineral phases (i.e., sanidine and biotite) within the cumulate crystal mush. We suggest that the presence of a refractory crystal mush, as documented by the occurrence of abundant crystal clots containing clinopyroxene, plagioclase and oxides, is the main reason for the lack of erupted crystal-rich material in the NYT. A comparison between the NYT and the CI, characterized by both crystal-poor extracted melts and crystal-rich magmas representing remobilized portions of a "mature" (i.e., sanidine dominated) cumulate residue, allows evaluation of the capability of crystal mushes of becoming eruptible upon recharge.
NASA Astrophysics Data System (ADS)
Zhong, Junting; Zhang, Xiaoye; Dong, Yunsheng; Wang, Yaqiang; Liu, Cheng; Wang, Jizhi; Zhang, Yangmei; Che, Haochi
2018-01-01
In January 2013, February 2014, December 2015 and December 2016 to 10 January 2017, 12 persistent heavy aerosol pollution episodes (HPEs) occurred in Beijing, which received special attention from the public. During the HPEs, the precise cause of PM2.5 explosive growth (mass concentration at least doubled in several hours to 10 h) is uncertain. Here, we analyzed and estimated relative contributions of boundary-layer meteorological factors to such growth, using ground and vertical meteorological data. Beijing HPEs are generally characterized by the transport stage (TS), whose aerosol pollution formation is primarily caused by pollutants transported from the south of Beijing, and the cumulative stage (CS), in which the cumulative explosive growth of PM2.5 mass is dominated by stable atmospheric stratification characteristics of southerly slight or calm winds, near-ground anomalous inversion, and moisture accumulation. During the CSs, observed southerly weak winds facilitate local pollutant accumulation by minimizing horizontal pollutant diffusion. Established by TSs, elevated PM2.5 levels scatter more solar radiation back to space to reduce near-ground temperature, which very likely causes anomalous inversion. This surface cooling by PM2.5 decreases near-ground saturation vapor pressure and increases relative humidity significantly; the inversion subsequently reduces vertical turbulent diffusion and boundary-layer height to trap pollutants and accumulate water vapor. Appreciable near-ground moisture accumulation (relative humidity > 80 %) would further enhance aerosol hygroscopic growth and accelerate liquid-phase and heterogeneous reactions, in which incompletely quantified chemical mechanisms need more investigation. The positive meteorological feedback noted on PM2.5 mass explains over 70 % of cumulative explosive growth.
Correlation among body height, intelligence, and brain gray matter volume in healthy children.
Taki, Yasuyuki; Hashizume, Hiroshi; Sassa, Yuko; Takeuchi, Hikaru; Asano, Michiko; Asano, Kohei; Kotozaki, Yuka; Nouchi, Rui; Wu, Kai; Fukuda, Hiroshi; Kawashima, Ryuta
2012-01-16
A significant positive correlation between height and intelligence has been demonstrated in children. Additionally, intelligence has been associated with the volume of gray matter in the brains of children. Based on these correlations, we analyzed the correlation among height, full-scale intelligence quotient (IQ) and gray matter volume applying voxel-based morphometry using data from the brain magnetic resonance images of 160 healthy children aged 5-18 years of age. As a result, body height was significantly positively correlated with brain gray matter volume. Additionally, the regional gray matter volume of several regions such as the bilateral prefrontal cortices, temporoparietal region, and cerebellum was significantly positively correlated with body height and that the gray matter volume of several of these regions was also significantly positively correlated with full-scale intelligence quotient (IQ) scores after adjusting for age, sex, and socioeconomic status. Our results demonstrate that gray and white matter volume may mediate the correlation between body height and intelligence in healthy children. Additionally, the correlations among gray and white matter volume, height, and intelligence may be at least partially explained by the effect of insulin-like growth factor-1 and growth hormones. Given the importance of the effect of environmental factors, especially nutrition, on height, IQ, and gray matter volume, the present results stress the importance of nutrition during childhood for the healthy maturation of body and brain. Copyright © 2011 Elsevier Inc. All rights reserved.
Mounier, Carrie; Andujo, Estela
2003-10-01
To determine the relationship between use of defense mechanisms and experiences of child maltreatment and cumulative victimization among homeless youth. Twenty-five homeless youth were individually interviewed regarding their victimization experiences and coping strategies. Use of defense mechanisms was assessed using the Defense Mechanism Rating Scale. Relationships were demonstrated between use of defenses and specific as well as cumulative victimization experiences. All levels of defenses became more pervasive in response to victimization, but this was not a predictor of overall immature defensive functioning. Clinical and program interventions to engage homeless youth need to incorporate an understanding of the relationship between defenses and victimization in order to be effective in maximizing upon the strengths of this population.
Wall, Marlene; Schmidt, Gertraud Maria; Janjang, Pornpan; Khokiattiwong, Somkiat; Richter, Claudio
2012-01-01
The Andaman Sea and other macrotidal semi-enclosed tropical seas feature large amplitude internal waves (LAIW). Although LAIW induce strong fluctuations i.e. of temperature, pH, and nutrients, their influence on reef development is so far unknown. A better-known source of disturbance is the monsoon affecting corals due to turbulent mixing and sedimentation. Because in the Andaman Sea both, LAIW and monsoon, act from the same westerly direction their relative contribution to reef development is difficult to discern. Here, we explore the framework development in a number of offshore island locations subjected to differential LAIW- and SW-monsoon impact to address this open question. Cumulative negative temperature anomalies - a proxy for LAIW impact - explained a higher percentage of the variability in coral reef framework height, than sedimentation rates which resulted mainly from the monsoon. Temperature anomalies and sediment grain size provided the best correlation with framework height suggesting that so far neglected subsurface processes (LAIW) play a significant role in shaping coral reefs.
Harding, Graham; Harding, Pamela; Wilkins, Arnold
2008-06-01
Wind turbines are known to produce shadow flicker by interruption of sunlight by the turbine blades. Known parameters of the seizure provoking effect of flicker, i.e., contrast, frequency, mark-space ratio, retinal area stimulated and percentage of visual cortex involved were applied to wind turbine features. The proportion of patients affected by viewing wind turbines expressed as distance in multiples of the hub height of the turbine showed that seizure risk does not decrease significantly until the distance exceeds 100 times the hub height. Since risk does not diminish with viewing distance, flash frequency is therefore the critical factor and should be kept to a maximum of three per second, i.e., sixty revolutions per minute for a three-bladed turbine. On wind farms the shadows cast by one turbine on another should not be viewable by the public if the cumulative flash rate exceeds three per second. Turbine blades should not be reflective.
NASA Astrophysics Data System (ADS)
Pisano, Luca; Vessia, Giovanna; Vennari, Carmela; Parise, Mario
2015-04-01
Empirical rainfall thresholds are a well established method to draw information about Duration (D) and Cumulated (E) values of the rainfalls that are likely to initiate shallow landslides. To this end, rain-gauge records of rainfall heights are commonly used. Several procedures can be applied to address the calculation of the Duration-Cumulated height and, eventually, the Intensity values related to the rainfall events responsible for shallow landslide onset. A large number of procedures are drawn from particular geological settings and climate conditions based on an expert identification of the rainfall event. A few researchers recently devised automated procedures to reconstruct the rainfall events responsible for landslide onset. In this study, 300 pairs of D, E couples, related to shallow landslides that occurred in a ten year span 2002-2012 on the Italian territory, have been drawn by means of two procedures: the expert method (Brunetti et al., 2010) and the automated method (Vessia et al., 2014). The two procedures start from the same sources of information on shallow landslides occurred during or soon after a rainfall. Although they have in common the method to select the date (up to the hour of the landslide occurrence), the site of the landslide and the choice of the rain-gauge representative for the rainfall, they differ when calculating the Duration and Cumulated height of the rainfall event. Moreover, the expert procedure identifies only one D, E pair for each landslide whereas the automated procedure draws 6 possible D,E pairs for the same landslide event. Each one of the 300 D, E pairs calculated by the automated procedure reproduces about 80% of the E values and about 60% of the D values calculated by the expert procedure. Unfortunately, no standard methods are available for checking the forecasting ability of both the expert and the automated reconstruction of the true D, E pairs that result in shallow landslide. Nonetheless, a statistical analysis on marginal distributions of the seven samples of 300 D and E values are performed in this study. The main objective of this statistical analysis is to highlight similarities and differences in the two sets of samples of Duration and Cumulated values collected by the two procedures. At first, the sample distributions have been investigated: the seven E samples are Lognormal distributed, whereas the D samples are all distributed Weibull like. On E samples, due to their Lognormal distribution, statistical tests can be applied to check two null hypotheses: equal mean values through the Student test, equal standard deviations through the Fisher test. These two hypotheses are accepted for the seven E samples, meaning that they come from the same population, at a confidence level of 95%. Conversely, the preceding tests cannot be applied to the seven D samples that are Weibull distributed with shape parameters k ranging between 0.9 to 1.2. Nonetheless, the two procedures calculate the rainfall event through the selection of the E values; after that the D is drawn. Thus, the results of this statistical analysis preliminary confirms the similarities of the two D,E pair set of values drawn from the two different procedures. References Brunetti, M.T., Peruccacci, S., Rossi, M., Luciani, S., Valigi, D., and Guzzetti, F.: Rainfall thresholds for the possible occurrence of landslides in Italy, Nat. Hazards Earth Syst. Sci., 10, 447-458, doi:10.5194/nhess-10-447-2010, 2010. Vessia G., Parise M., Brunetti M.T., Peruccacci S., Rossi M., Vennari C., and Guzzetti F.: Automated reconstruction of rainfall events responsible for shallow landslides, Nat. Hazards Earth Syst. Sci., 14, 2399-2408, doi: 10.5194/nhess-14-2399-2014, 2014.
NASA Astrophysics Data System (ADS)
Miller, James D.
2003-10-01
A spiral model of pitch interrelates tone chroma, tone height, equal temperament scales, and a cochlear map. Donkin suggested in 1870 that the pitch of tones could be well represented by an equiangular spiral. More recently, the cylindrical helix has been popular for representing tone chroma and tone height. Here it is shown that tone chroma, tone height, and cochlear position can be conveniently related to tone frequency via a planar spiral. For this ``equal-temperament spiral,'' (ET Spiral) tone chroma is conceived as a circular array with semitones at 30° intervals. The frequency of sound on the cent scale (re 16.351 Hz) is represented by the radius of the spiral defined by r=(1200/2π)θr, where θr is in radians. By these definitions, one revolution represents one octave, 1200 cents, 30° represents a semitone, the radius relates θ to cents in accordance with equal temperament (ET) tuning, and the arclength of the spiral matches the mapping of sound frequency to the basilar membrane. Thus, the ET Spiral gives tone chroma as θ, tone height as the cent scale, and the cochlear map as the arclength. The possible implications and directions for further work are discussed.
Soenksen, L R; Kassis, T; Noh, M; Griffith, L G; Trumper, D L
2018-03-13
Precise fluid height sensing in open-channel microfluidics has long been a desirable feature for a wide range of applications. However, performing accurate measurements of the fluid level in small-scale reservoirs (<1 mL) has proven to be an elusive goal, especially if direct fluid-sensor contact needs to be avoided. In particular, gravity-driven systems used in several microfluidic applications to establish pressure gradients and impose flow remain open-loop and largely unmonitored due to these sensing limitations. Here we present an optimized self-shielded coplanar capacitive sensor design and automated control system to provide submillimeter fluid-height resolution (∼250 μm) and control of small-scale open reservoirs without the need for direct fluid contact. Results from testing and validation of our optimized sensor and system also suggest that accurate fluid height information can be used to robustly characterize, calibrate and dynamically control a range of microfluidic systems with complex pumping mechanisms, even in cell culture conditions. Capacitive sensing technology provides a scalable and cost-effective way to enable continuous monitoring and closed-loop feedback control of fluid volumes in small-scale gravity-dominated wells in a variety of microfluidic applications.
Characteristics of Mini-Magnetospheres Formed by Paleo-Magnetic Fields of Mars
NASA Technical Reports Server (NTRS)
Ness, N. F.; Krymskii, A. M.; Crider, D. H.; Breus, T. K.; Acuna, M. H.; Hinson, D.; Barashyan, K. K.
2003-01-01
The intensely and non-uniformly magnetized crustal sources generate an effective large-scale magnetic field. In the Southern hemisphere the strongest crustal fields lead to the formation of large-scale mini-magnetospheres. In the Northern hemisphere, the crustal fields are rather weak and there are only isolated mini-magnetospheres. Re-connection with the interplanetary magnetic field (IMF) occurs in many localized regions. This may occur not only in cusp-like structures above nearly vertical field anomalies but also in halos extending several hundreds of kilometers from these sources. Re-connection will permit solar wind (SW) and more energetic particles to precipitate into and heat the neutral atmosphere. Electron density profiles of the ionosphere of Mars derived from radio occultation data obtained by the Radio Science Mars Global Surveyor (MGS) experiment are concentrated in the near polar regions. The effective scale-height of the neutral atmosphere density in the vicinity of the ionization peak has been derived for each of the profiles studied. The effective scale-heights have been compared with the crustal magnetic fields measured by the MGS Magnetometer/Electron Reflectometer (MAG/ER) experiment. A significant difference between the large-scale mini-magnetospheres and regions outside of them has been found. The neutral atmosphere is cooler inside the large-scale mini-magnetospheres. It appears that outside of the cusps the strong crustal magnetic fields prevent additional heating of the neutral atmosphere by direct interaction of the SW. The scale-height of the neutral atmosphere density derived from the experiment with the MGS Accelerometer has been compared with MAG/ER data. The scale-height was found to be usually larger than mean value near the boundaries of potential mini-magnetospheres and around cusps . It may indicate that the paleo-magnetic/IMF field re-connection is characteristic of the mini-magnetospheres at Mars.
The correlation of VLF propagation variations with atmospheric planetary-scale waves
NASA Technical Reports Server (NTRS)
Cavalieri, D. J.; Deland, R. J.; Potemra, T. A.; Gavin, R. F.
1973-01-01
Variations in the received daytime phase of long distance, cesium-controlled, VLF transmission were compared to the height variations of the 10-mb isobaric surface during the first three months of 1965 and 1969. The VLF phase values are also compared to height variations of constant electron densities in the E-region and to variations of f-min which have been shown to be well correlated with planetary-scale variations in the stratosphere by Deland and Cavalieri (1973). The VLF phase variations show good correlation with these previous ionospheric measurements and with the 10-mb surfaces. The planetary scale waves in the stratosphere are shown to be travelling on the average eastward in 1965 and westward in 1969. These correlations are interpreted as due to the propagation of travelling planetary scale waves with westward tilted wave fronts. Upward energy transport due to the vertical structure of those waves is also discussed. These correlations provide further evidence for the coupling between the lower ionosphere at about 70 km altitude (the daytime VLF reflection height and the stratosphere, and they demonstrate the importance of planetary wave phenomena to VLF propagation.
Bertrand, A M; Chaussain, J L; Job, B; Mariani, R; Ponte, C; Rappaport, R; Rochiccioll, P; Chatelain, P
1996-06-01
There have been few studies of GH dose responses in Turner's syndrome. We have therefore compared the growth effect of two doses of subcutaneous GH: 0.45 (D1) or 0.90 (D2) IU/kg/week. Multicentre study with two parallel randomized groups treated with D1 or D2 dose for one year, then with D2 for the second and third years in both groups. Ninety-seven girls with Turner's syndrome aged from 4.8 to 16.5 years. The first mean height velocity (HV) was significantly higher with D2. At one year the girls changed from D1 to D2 showed a further acceleration in HV. During second and third years HV remained above the mean for untreated Turner girls, in both groups. Mean cumulative height gains over the 3 years were 1.06 and 1.17 SDS/CA (Ranke's Turner standard) in groups G1 and G2 respectively. Bone maturation, over 36 months, was 33.7 (G1) and 31.9 (G2) months. These results suggest that, if a higher initial GH dose is associated with a greater net initial height gain, the duration of treatment might affect the long-term results. Intermittent treatment should be considered.
NASA Astrophysics Data System (ADS)
Eweys, Omar Ali; Elwan, Abeer A.; Borham, Taha I.
2017-12-01
This manuscript proposes an approach for estimating soil moisture content over corn fields using C-band SAR data acquired by RADARSAT-2 satellite. An image based approach is employed to remove the vegetation contribution to the satellite signals. In particular, the absolute difference between like and cross polarized signals (ADLC) is employed for segmenting the canopy growth cycle into tiny stages. Each stage is represented by a Cumulative Distribution Function (CDF) of the like polarized signals. For periods of bare soils and vegetation cover, CDFs are compared and the vegetation contribution is quantified. The portion which represent the soil contributions (σHHsoil°) to the satellite signals; are employed for inversely running Oh model and the water cloud model for estimating soil moisture, canopy water content and canopy height respectively. The proposed approach shows satisfactory performance where high correlation of determination (R2) is detected between the field observations and the corresponding retrieved soil moisture, canopy water content and canopy height (R2 = 0.64, 0.97 and 0.98 respectively). Soil moisture retrieval is associated with root mean square error (RMSE) of 0.03 m3 m-3 while estimating canopy water content and canopy height have RMSE of 0.38 kg m-2 and 0.166 m respectively.
Nonlinear load-deflection behavior of abutment backwalls with varying height and soil density.
DOT National Transportation Integrated Search
2011-12-01
We address the scaling of abutment wall lateral response with wall height and compaction condition through testing and analytical work. The : analytical work was undertaken to develop hyperbolic curves representing the load-deflection response of bac...
Stereophotogrammetry in studies of riparian vegetation dynamics
NASA Astrophysics Data System (ADS)
Hortobagyi, Borbala; Vautier, Franck; Corenblit, Dov; Steiger, Johannes
2014-05-01
Riparian vegetation responds to hydrogeomorphic disturbances and also controls sediment deposition and erosion. Spatio-temporal riparian vegetation dynamics within fluvial corridors have been quantified in many studies using aerial photographs and GIS. However, this approach does not allow the consideration of woody vegetation growth rates (i.e. vertical dimension) which are fundamental when studying feedbacks between the processes of fluvial landform construction and vegetation establishment and succession. We built 3D photogrammetric models of vegetation height based on aerial argentic and digital photographs from sites of the Allier and Garonne Rivers (France). The models were realized at two different spatial scales and with two different methods. The "large" scale corresponds to the reach of the river corridor on the Allier river (photograph taken in 2009) and the "small" scale to river bars of the Allier (photographs taken in 2002, 2009) and Garonne Rivers (photographs taken in 2000, 2002, 2006 and 2010). At the corridor scale, we generated vegetation height models using an automatic procedure. This method is fast but can only be used with digital photographs. At the bar scale, we constructed the models manually using a 3D visualization on the screen. This technique showed good results for digital and also argentic photographs but is very time-consuming. A diachronic study was performed in order to investigate vegetation succession by distinguishing three different classes according to the vegetation height: herbs (<1 m), shrubs (1-4 m) or trees (>4 m). Both methods, i.e. automatic and manual, were employed to study the evolution of the three vegetation classes and the recruitment of new vegetation patches. A comparison was conducted between the vegetation height given by models (automatic and manual) and the vegetation height measured in the field. The manually produced models (small scale) were of a precision of 0.5-1 m, allowing the quantification of woody vegetation growth rates. Thus, our results show that the manual method we developed is accurate to quantify vegetation growth rates at small scales, whereas the less accurate automatic method is appropriate to study vegetation succession at the corridor scale. Both methods are complementary and will contribute to a further exploration of the mutual relationships between hydrogeomorphic processes, topography and vegetation dynamics within alluvial systems, adding the quantification of the vertical dimension of riparian vegetation to their spatio-temporal characteristics.
Cumulative exposure to traumatic events in older adults
Ogle, Christin M.; Rubin, David C.; Siegler, Ilene C.
2014-01-01
Objectives The present study examined the impact of cumulative trauma exposure on current posttraumatic stress disorder (PTSD) symptom severity in a nonclinical sample of adults in their 60s. The predictive utility of cumulative trauma exposure was compared to other known predictors of PTSD, including trauma severity, personality traits, social support, and event centrality. Method Community-dwelling adults (n = 2,515) from the crest of the Baby Boom generation completed the Traumatic Life Events Questionnaire, the PTSD Checklist, the NEO Personality Inventory, the Centrality of Event Scale, and rated their current social support. Results Cumulative trauma exposure predicted greater PTSD symptom severity in hierarchical regression analyses consistent with a dose-response model. Neuroticism and event centrality also emerged as robust predictors of PTSD symptom severity. In contrast, the severity of individuals’ single most distressing life event, as measured by self-report ratings of the A1 PTSD diagnostic criterion, did not add explanatory variance to the model. Analyses concerning event categories revealed that cumulative exposure to childhood violence and adulthood physical assaults were most strongly associated with PTSD symptom severity in older adulthood. Moreover, cumulative self-oriented events accounted for a larger percentage of variance in symptom severity compared to events directed at others. Conclusion Our findings suggest that the cumulative impact of exposure to traumatic events throughout the life course contributes significantly to post-traumatic stress in older adulthood above and beyond other known predictors of PTSD. PMID:24011223
Learning by Doing, Scale Effects, or Neither? Cardiac Surgeons after Residency
Huesch, Marco D
2009-01-01
Objective To examine impacts of operating surgeon scale and cumulative experience on postoperative outcomes for patients treated with coronary artery bypass grafts (CABG) by “new” surgeons. Pooled linear, fixed effects panel, and instrumented regressions were estimated. Data Sources The administrative data included comorbidities, procedures, and outcomes for 19,978 adult CABG patients in Florida in 1998–2006, and public data on 57 cardiac surgeons who completed residencies after 1997. Study Design Analysis was at the patient level. Controls for risk, hospital scale and scope, and operating surgeon characteristics were made. Patient choice model instruments were constructed. Experience was estimated allowing for “forgetting” effects. Principal Findings Panel regressions with surgeon fixed effects showed neither surgeon scale nor cumulative volumes significantly impacted mortality nor consistently impacted morbidity. Estimation of “forgetting” suggests that almost all prior experience is depreciated from one quarter to the next. Instruments were strong, but exogeneity of volume was not rejected. Conclusions In postresidency surgeons, no persuasive evidence is found for learning by doing, scale, or selection effects. More research is needed to support the cautious view that, for these “new” cardiac surgeons, patient volume could be redistributed based on realized outcomes without disruption. PMID:19732169
Singh, Warsha; Örnólfsdóttir, Erla B.; Stefansson, Gunnar
2014-01-01
An approach is developed to estimate size of Iceland scallop shells from AUV photos. A small-scale camera based AUV survey of Iceland scallops was conducted at a defined site off West Iceland. Prior to height estimation of the identified shells, the distortions introduced by the vehicle orientation and the camera lens were corrected. The average AUV pitch and roll was and deg that resulted in error in ground distance rendering these effects negligible. A quadratic polynomial model was identified for lens distortion correction. This model successfully predicted a theoretical grid from a frame photographed underwater, representing the inherent lens distortion. The predicted shell heights were scaled for the distance from the bottom at which the photos were taken. This approach was validated by height estimation of scallops of known sizes. An underestimation of approximately cm was seen, which could be attributed to pixel error, where each pixel represented cm. After correcting for this difference the estimated heights ranged from cm. A comparison of the height-distribution from a small-scale dredge survey carried out in the vicinity showed non-overlapping peaks in size distribution, with scallops of a broader size range visible in the AUV survey. Further investigations are necessary to evaluate any underlying bias and to validate how representative these surveys are of the true population. The low resolution images made identification of smaller scallops difficult. Overall, the observations of very few small scallops in both surveys could be attributed to low recruitment levels in the recent years due to the known scallop parasite outbreak in the region. PMID:25303243
Singh, Warsha; Örnólfsdóttir, Erla B; Stefansson, Gunnar
2014-01-01
An approach is developed to estimate size of Iceland scallop shells from AUV photos. A small-scale camera based AUV survey of Iceland scallops was conducted at a defined site off West Iceland. Prior to height estimation of the identified shells, the distortions introduced by the vehicle orientation and the camera lens were corrected. The average AUV pitch and roll was 1.3 and 2.3 deg that resulted in <2% error in ground distance rendering these effects negligible. A quadratic polynomial model was identified for lens distortion correction. This model successfully predicted a theoretical grid from a frame photographed underwater, representing the inherent lens distortion. The predicted shell heights were scaled for the distance from the bottom at which the photos were taken. This approach was validated by height estimation of scallops of known sizes. An underestimation of approximately 0.5 cm was seen, which could be attributed to pixel error, where each pixel represented 0.24 x 0.27 cm. After correcting for this difference the estimated heights ranged from 3.8-9.3 cm. A comparison of the height-distribution from a small-scale dredge survey carried out in the vicinity showed non-overlapping peaks in size distribution, with scallops of a broader size range visible in the AUV survey. Further investigations are necessary to evaluate any underlying bias and to validate how representative these surveys are of the true population. The low resolution images made identification of smaller scallops difficult. Overall, the observations of very few small scallops in both surveys could be attributed to low recruitment levels in the recent years due to the known scallop parasite outbreak in the region.
NASA Astrophysics Data System (ADS)
Pignalberi, A.; Pezzopane, M.; Rizzi, R.
2018-03-01
An empirical method to model the lower part of the ionospheric topside region from the F2 layer peak height to about 500-600 km of altitude over the European region is proposed. The method is based on electron density values recorded from December 2013 to June 2016 by Swarm satellites and on foF2 and hmF2 values provided by IRI UP (International Reference Ionosphere UPdate), which is a method developed to update the IRI model relying on the assimilation of foF2 and M(3000)F2 data routinely recorded by a network of European ionosonde stations. Topside effective scale heights are calculated by fitting some definite analytical functions (α-Chapman, β-Chapman, Epstein, and exponential) through the values recorded by Swarm and the ones output by IRI UP, with the assumption that the effective scale height is constant in the altitude range considered. Calculated effective scale heights are then modeled as a function of foF2 and hmF2, in order to be operationally applicable to both ionosonde measurements and ionospheric models, like IRI. The method produces two-dimensional grids of the median effective scale height binned as a function of foF2 and hmF2, for each of the considered topside profiles. A statistical comparison with Constellation Observing System for Meteorology, Ionosphere, and Climate/FORMOsa SATellite-3 collected Radio Occultation profiles is carried out to assess the validity of the proposed method and to investigate which of the considered topside profiles is the best one. The α-Chapman topside function displays the best performance compared to the others and also when compared to the NeQuick topside option of IRI.
Relationships of 35 lower limb muscles to height and body mass quantified using MRI.
Handsfield, Geoffrey G; Meyer, Craig H; Hart, Joseph M; Abel, Mark F; Blemker, Silvia S
2014-02-07
Skeletal muscle is the most abundant tissue in the body and serves various physiological functions including the generation of movement and support. Whole body motor function requires adequate quantity, geometry, and distribution of muscle. This raises the question: how do muscles scale with subject size in order to achieve similar function across humans? While much of the current knowledge of human muscle architecture is based on cadaver dissection, modern medical imaging avoids limitations of old age, poor health, and limited subject pool, allowing for muscle architecture data to be obtained in vivo from healthy subjects ranging in size. The purpose of this study was to use novel fast-acquisition MRI to quantify volumes and lengths of 35 major lower limb muscles in 24 young, healthy subjects and to determine if muscle size correlates with bone geometry and subject parameters of mass and height. It was found that total lower limb muscle volume scales with mass (R(2)=0.85) and with the height-mass product (R(2)=0.92). Furthermore, individual muscle volumes scale with total muscle volume (median R(2)=0.66), with the height-mass product (median R(2)=0.61), and with mass (median R(2)=0.52). Muscle volume scales with bone volume (R(2)=0.75), and muscle length relative to bone length is conserved (median s.d.=2.1% of limb length). These relationships allow for an arbitrary subject's individual muscle volumes to be estimated from mass or mass and height while muscle lengths may be estimated from limb length. The dataset presented here can further be used as a normative standard to compare populations with musculoskeletal pathologies. © 2013 Published by Elsevier Ltd.
Retrievals of Jovian Tropospheric Phosphine from Cassini/CIRS
NASA Technical Reports Server (NTRS)
Irwin, P. G. J.; Parrish, P.; Fouchet, T.; Calcutt, S. B.; Taylor, F. W.; Simon-Miller, A. A.; Nixon, C. A.
2004-01-01
On December 30th 2000, the Cassini-Huygens spacecraft reached the perijove milestone on its continuing journey to the Saturnian system. During an extended six-month encounter, the Composite Infrared Spectrometer (CIRS) returned spectra of the Jovian atmosphere, rings and satellites from 10-1400 cm(exp -1) (1000-7 microns) at a programmable spectral resolution of 0.5 to 15 cm(exp -1). The improved spectral resolution of CIRS over previous IR instrument-missions to Jupiter, the extended spectral range, and higher signal-to-noise performance provide significant advantages over previous data sets. CIRS global observations of the mid-infrared spectrum of Jupiter at medium resolution (2.5 cm(exp -1)) have been analysed both with a radiance differencing scheme and an optimal estimation retrieval model to retrieve the spatial variation of phosphine and ammonia fractional scale height in the troposphere between 60 deg S and 60 deg N at a spatial resolution of 6 deg. The ammonia fractional scale height appears to be high over the Equatorial Zone (EZ) but low over the North Equatorial Belt (NEB) and South Equatorial Belt (SEB) indicating rapid uplift or strong vertical mixing in the EZ. The abundance of phosphine shows a similar strong latitudinal variation which generally matches that of the ammonia fractional scale height. However while the ammonia fractional scale height distribution is to a first order symmetric in latitude, the phosphine distribution shows a North/South asymmetry at mid latitudes with higher amounts detected at 40 deg N than 40 deg S. In addition the data show that while the ammonia fractional scale height at this spatial resolution appears to be low over the Great Red Spot (GRS), indicating reduced vertical mixing above the approx. 500 mb level, the abundance of phosphine at deeper levels may be enhanced at the northern edge of the GRS indicating upwelling.
Mound-Interface Kinetics in Dictyostelium Aggregation
NASA Astrophysics Data System (ADS)
Tutu, Hiroki
2002-09-01
The mound development of the cellular slime mold amoebae Dictyostelium discoideum is studied with an interface kinetic model for the height of cell layers. As a competitive role for the chemotaxis, we compare two types of curvature relaxations; the surface relaxation induced by cell-substrate affinity (model A), and that comes from a cell-cell adhesive effect (model B). It is found that both models are characterized by the growth law for the maximum mound height. Based on a self-similarity scaling hypothesis for the spatial structure of streaming pattern, we suggest a scaling law for the growth of mound-height hmax ˜ t1-1/α+β/α with α = 2 (4) for the model A (B) and a number 0 ≤ β < 1.
Steady-streaming effects on the motion of the cerebrospinal fluid (CSF) in the spinal canal
NASA Astrophysics Data System (ADS)
Lawrence, Jenna; Coenen, Wilfried; Sanchez, Antonio; Lasheras, Juan
2017-11-01
With each heart beat the oscillatory blood supply to the rigid cranial vault produces a time-periodic variation of the intracranial pressure that drives the cerebrospinal fluid (CSF) periodically in and out of the compliant spinal canal. We have recently conducted an analysis of this flow-structure interaction problem taking advantage of the small compliance of the dura membrane bounding externally the CSF and of the disparity of length scales associated with the geometry of the subarachnoid space. We have shown in an idealized geometry that the steady-streaming motion associated with this periodic flow, resulting from the nonlinear cumulative effects of convective acceleration, causes a bulk recirculation of CSF inside the spinal canal, which has been observed in many radiological studies. We extend here our study to investigate the possible contribution arising from the flow around the nerve roots protruding from the spinal cord, an effect that was neglected in our previous work. For this purpose, we consider the oscillatory motion around a cylindrical post confined between two parallel plates. For large values of the relevant Strouhal number we find at leading order a harmonic Stokes flow, whereas steady-streaming effects enter in the first-order corrections, which are computed for realistic values of the Womersley number and of the cylinder height-to-radius ratio.
Height conditions salary expectations: Evidence from large-scale data in China
NASA Astrophysics Data System (ADS)
Yang, Xiao; Gao, Jian; Liu, Jin-Hu; Zhou, Tao
2018-07-01
Height premium has been revealed by extensive literature, however, evidence from China based on large-scale data remains still lacking. In this paper, we study how height conditions salary expectations by exploring a dataset covering over 140,000 Chinese job seekers. By using graphical and regression models, we find evidence in support of height premium that tall people expect a significantly higher salary in career development. In particular, regression results suggest stronger effects of height premium on female than on male, however, the gender differences decrease as the education level increases and become insignificant after holding all control variables fixed. Further, results from graphical models suggest three promising ways in helping short people: (i) to accumulate more working experiences, since one year seniority can respectively make up about 3 cm and 7 cm shortness for female and male; (ii) to increase the level of education, since one higher academic degree may eliminate all disadvantages that brought by shortness; (iii) to target jobs in regions with a higher level of development. Our work provides a cross-culture supportive evidence of height premium and contributes two novel features to the literature: the compensation story in helping short people, and the focus on salary expectations in isolation from discrimination channels.
Fawzi, Mounir H; Kira, Ibrahim A; Fawzi, Mohab M; Mohamed, Hanan E; Fawzi, Maggie M
2013-01-01
We aimed to investigate the relation of trauma profile to schizophrenia psychopathology in a sample of Egyptian drug-naïve adolescent patients with first-episode schizophrenia. In addition, a hypothesized mediating effect of brain-derived neurotrophic factor (BDNF) in this relation was formally tested. We assessed 74 eligible outpatients using the Positive and Negative Syndrome Scale (PANSS) for measuring psychopathology. Trauma histories were recorded with the help of the Cumulative Trauma Measure. Serum BDNF levels were estimated by enzyme-linked immunosorbent assay. Total cumulative trauma, personal identity trauma, and survival trauma were found to be the significant predictors for schizophrenia psychopathology. BDNF fully mediated the associations between total cumulative trauma and overall schizophrenia psychopathology. BDNF also mediated the associations between some types of trauma and both PANSS-positive and PANSS-negative symptom factors. We concluded that total cumulative trauma and certain trauma types are linked with schizophrenia psychopathology. BDNF appears to mediate these links.
Association of Rotating Night Shift Work with BMI and Abdominal Obesity among Nurses and Midwives.
Peplonska, Beata; Bukowska, Agnieszka; Sobala, Wojciech
2015-01-01
Mounting epidemiological evidence suggests that night shift work may contribute to the etiology of increased body weight. The present study aimed to examine association between rotating night shift work and body mass index (BMI), and abdominal adiposity respectively among nurses and midwives. A cross-sectional study was conducted among 724 female nurses and midwives, aged 40-60 years (354 rotating night shift and 370 daytime workers) in Łódź, Poland, between 2008 and 2011. Information about occupational history and potential confounders was collected during personal interviews. Anthropometric measurements of body weight, height, waist (WC) and hip (HC) circumference were made, and body mass index (BMI), waist to hip ratio (WHR) and waist to height ratio (WHtR) were calculated. GLM regression models and multinomial logit regression models were fitted to explore the association between night shift work and anthropometric parameters, with adjustment for age, body silhouette at age 20, current smoking status, packyears, marital status, and menopausal hormone therapy use. Cumulative night shift work showed significant associations with BMI, WC, HC and WHtR, with BMI increasing by 0.477 kg/m2 per 1000 night duties and by 0.432 kg/m2 per 10000 night shift hours, WC increasing respectively by 1.089 cm and 0.99 cm, and HC by 0.72 cm and WHtR by 0.007 cm for both metrics. Both current and cumulative night work was associated with obesity (BMI≥30kg/m2), with OR=3.9 (95%CI:1.5-9.9), in women reporting eight or more night shifts per month. The results of the study support the previously reported relations between night shift work and development of obesity.
Association of Rotating Night Shift Work with BMI and Abdominal Obesity among Nurses and Midwives
Peplonska, Beata; Bukowska, Agnieszka; Sobala, Wojciech
2015-01-01
Background Mounting epidemiological evidence suggests that night shift work may contribute to the etiology of increased body weight. The present study aimed to examine association between rotating night shift work and body mass index (BMI), and abdominal adiposity respectively among nurses and midwives. Methods A cross-sectional study was conducted among 724 female nurses and midwives, aged 40-60 years (354 rotating night shift and 370 daytime workers) in Łódź, Poland, between 2008 and 2011. Information about occupational history and potential confounders was collected during personal interviews. Anthropometric measurements of body weight, height, waist (WC) and hip (HC) circumference were made, and body mass index (BMI), waist to hip ratio (WHR) and waist to height ratio (WHtR) were calculated. GLM regression models and multinomial logit regression models were fitted to explore the association between night shift work and anthropometric parameters, with adjustment for age, body silhouette at age 20, current smoking status, packyears, marital status, and menopausal hormone therapy use. Results Cumulative night shift work showed significant associations with BMI, WC, HC and WHtR, with BMI increasing by 0.477 kg/m2 per 1000 night duties and by 0.432 kg/m2 per 10000 night shift hours, WC increasing respectively by 1.089 cm and 0.99 cm, and HC by 0.72 cm and WHtR by 0.007 cm for both metrics. Both current and cumulative night work was associated with obesity (BMI≥30kg/m2), with OR=3.9 (95%CI:1.5-9.9), in women reporting eight or more night shifts per month. Conclusion The results of the study support the previously reported relations between night shift work and development of obesity. PMID:26196859
Investigating reduced bag weight as an effective risk mediator for mason tenders.
Davis, Kermit G; Kotowski, Susan E; Albers, James; Marras, William S
2010-10-01
Masonry workers face some of the highest physical demands in the construction industry where large bags of masonry material weighing 42.7 kg are commonly handled by mason tenders who mix the mortar, distribute mortar and bricks/blocks, and erect/dismantle scaffolding throughout the day. The objective of this study was to determine the effectiveness of using half-weight bags (21.4 kg) on reducing the biomechanical loading, physiological response, and perceived exertions. Ten male subjects performed asymmetric lifting tasks simulating unloading bags from a pallet. Muscle activity, trunk kinematics, heart rate, blood pressure and subjective rating data were collected. Spine loads were predicted from a well-validated EMG-assisted model. Bag weight, lift type, bag height at origin, and asymmetry at destination significantly impacted the spine loads. While there was a 50% reduction in bag weight, the peak loads for the half-weight bags were only 25% less than the more available full-weight bags (a reduction of about 320 N of shear and 1000 N of compression). Lifts allowing movement of the feet reduced the loads by about 22% in shear and 27% in compression compared to constrained postures. Interestingly, cumulative spine loads were greater for the lighter bags than the heavy bags ( approximately 40%). The subjective ratings of exertion and risk were significantly lower for the lighter bags. RELEVANCE TO INDUSTRY: The reduction in peak spine loading for the half-weight bags, particularly at the higher heights and when the feet were allowed to move could significantly reduce the injuries of masonry workers. However, there were trade-offs with cumulative loads that may minimize the reduced risk. Overall, given the limited amount of time lifting bags, the reduction of peak loads.
Freeman, Mary C.; Pringle, C.M.; Jackson, C.R.
2007-01-01
Cumulatively, headwater streams contribute to maintaining hydrologic connectivity and ecosystem integrity at regional scales. Hydrologic connectivity is the water-mediated transport of matter, energy and organisms within or between elements of the hydrologic cycle. Headwater streams compose over two-thirds of total stream length in a typical river drainage and directly connect the upland and riparian landscape to the rest of the stream ecosystem. Altering headwater streams, e.g., by channelization, diversion through pipes, impoundment and burial, modifies fluxes between uplands and downstream river segments and eliminates distinctive habitats. The large-scale ecological effects of altering headwaters are amplified by land uses that alter runoff and nutrient loads to streams, and by widespread dam construction on larger rivers (which frequently leaves free-flowing upstream portions of river systems essential to sustaining aquatic biodiversity). We discuss three examples of large-scale consequences of cumulative headwater alteration. Downstream eutrophication and coastal hypoxia result, in part, from agricultural practices that alter headwaters and wetlands while increasing nutrient runoff. Extensive headwater alteration is also expected to lower secondary productivity of river systems by reducing stream-system length and trophic subsidies to downstream river segments, affecting aquatic communities and terrestrial wildlife that utilize aquatic resources. Reduced viability of freshwater biota may occur with cumulative headwater alteration, including for species that occupy a range of stream sizes but for which headwater streams diversify the network of interconnected populations or enhance survival for particular life stages. Developing a more predictive understanding of ecological patterns that may emerge on regional scales as a result of headwater alterations will require studies focused on components and pathways that connect headwaters to river, coastal and terrestrial ecosystems. Linkages between headwaters and downstream ecosystems cannot be discounted when addressing large-scale issues such as hypoxia in the Gulf of Mexico and global losses of biodiversity.
ERIC Educational Resources Information Center
Penfield, Randall D.; Giacobbi, Peter R., Jr.; Myers, Nicholas D.
2007-01-01
One aspect of construct validity is the extent to which the measurement properties of a rating scale are invariant across the groups being compared. An increasingly used method for assessing between-group differences in the measurement properties of items of a scale is the framework of differential item functioning (DIF). In this paper we…
Are eating habits associated with physical fitness in primary school children?
Thivel, David; David, Thivel; Aucouturier, Julien; Julien, Aucouturier; Isacco, Laurie; Laurie, Isacco; Lazaar, Nordine; Nordine, Lazaar; Ratel, Sébastien; Sébastien, Ratel; Doré, Eric; Eric, Doré; Meyer, Martine; Martine, Meyer; Duché, Pascale; Pascale, Duché
2013-01-01
Children's eating habits have mainly been related to anthropometric characteristics but less is known about their association with physical fitness. 278 French school children (131 boys and 147 girls) filled in eating habit questionnaires and completed anthropometric measurement (weight, height, skinfolds) and physical fitness tests. The 20-m Shuttle run test and the Squat Jump test were used to assess aerobic fitness and anaerobic (lower limb muscle power) fitness respectively. Breakfast consumption was associated with both aerobic fitness (p<0.05) and lower limb muscle power (p<0.01) while snacking was negatively related to Squat Jump performances (p<0.05). There was no association between physical fitness and either the type of the consumed-beverages or TV watching during dinner and lunch meals. Cumulated unhealthy eating habits was negatively associated with CRF stages and lower limb muscle power performances (p<0.05). French primary school children physical fitness is associated with their eating habits and decreases with the number of unhealthy eating behaviors cumulated. Copyright © 2012 Elsevier Ltd. All rights reserved.
The properties of the disk system of globular clusters
NASA Technical Reports Server (NTRS)
Armandroff, Taft E.
1989-01-01
A large refined data sample is used to study the properties and origin of the disk system of globular clusters. A scale height for the disk cluster system of 800-1500 pc is found which is consistent with scale-height determinations for samples of field stars identified with the Galactic thick disk. A rotational velocity of 193 + or - 29 km/s and a line-of-sight velocity dispersion of 59 + or - 14 km/s have been found for the metal-rich clusters.
Convective boundary layer heights over mountainous terrain - A review of concepts -
NASA Astrophysics Data System (ADS)
De Wekker, Stephan; Kossmann, Meinolf
2015-12-01
Mountainous terrain exerts an important influence on the Earth's atmosphere and affects atmospheric transport and mixing at a wide range of temporal and spatial scales. The vertical scale of this transport and mixing is determined by the height of the atmospheric boundary layer, which is therefore an important parameter in air pollution studies, weather forecasting, climate modeling, and many other applications. It is recognized that the spatio-temporal structure of the daytime convective boundary layer (CBL) height is strongly modified and more complex in hilly and mountainous terrain compared to flat terrain. While the CBL over flat terrain is mostly dominated by turbulent convection, advection from multi-scale thermally driven flows plays an important role for the CBL evolution over mountainous terrain. However, detailed observations of the CBL structure and understanding of the underlying processes are still limited. Characteristics of CBL heights in mountainous terrain are reviewed for dry, convective conditions. CBLs in valleys and basins, where hazardous accumulation of pollutants is of particular concern, are relatively well-understood compared to CBLs over slopes, ridges, or mountain peaks. Interests in the initiation of shallow and deep convection, and of budgets and long-range transport of air pollutants and trace gases, have triggered some recent studies on terrain induced exchange processes between the CBL and the overlying atmosphere. These studies have helped to gain more insight into CBL structure over complex mountainous terrain, but also show that the universal definition of CBL height over mountains remains an unresolved issue. The review summarizes the progress that has been made in documenting and understanding spatio-temporal behavior of CBL heights in mountainous terrain and concludes with a discussion of open research questions and opportunities for future research.
Cloud and boundary layer structure over San Nicolas Island during FIRE
NASA Technical Reports Server (NTRS)
Albrecht, Bruce A.; Fairall, Christopher W.; Syrett, William J.; Schubert, Wayne H.; Snider, Jack B.
1990-01-01
The temporal evolution of the structure of the marine boundary layer and of the associated low-level clouds observed in the vicinity of the San Nicolas Island (SNI) is defined from data collected during the First ISCCP Regional Experiment (FIRE) Marine Stratocumulus Intense Field Observations (IFO) (July 1 to 19). Surface, radiosonde, and remote-sensing measurements are used for this analysis. Sounding from the Island and from the ship Point Sur, which was located approximately 100 km northwest of SNI, are used to define variations in the thermodynamic structure of the lower-troposphere on time scales of 12 hours and longer. Time-height sections of potential temperature and equivalent potential temperature clearly define large-scale variations in the height and the strength of the inversion and periods where the conditions for cloud-top entrainment instability (CTEI) are met. Well defined variations in the height and the strength of the inversion were associated with a Cataline Eddy that was present at various times during the experiment and with the passage of the remnants of a tropical cyclone on July 18. The large-scale variations in the mean thermodynamic structure at SNI correlate well with those observed from the Point Sur. Cloud characteristics are defined for 19 days of the experiment using data from a microwave radiometer, a cloud ceilometer, a sodar, and longwave and shortwave radiometers. The depth of the cloud layer is estimated by defining inversion heights from the sodar reflectivity and cloud-base heights from a laser ceilometer. The integrated liquid water obtained from NOAA's microwave radiometer is compared with the adiabatic liquid water content that is calculated by lifting a parcel adiabatically from cloud base. In addition, the cloud structure is characterized by the variability in cloud-base height and in the integrated liquid water.
Interannual Variability in Amundsen Sea Ice-Shelf Height Change Linked to ENSO
NASA Astrophysics Data System (ADS)
Paolo, F. S.; Fricker, H. A.; Padman, L.
2015-12-01
Atmospheric and sea-ice conditions around Antarctica, particularly in the Amundsen and Bellingshausen seas, respond to climate dynamics in the tropical Pacific Ocean on interannual time scales including the El Nino-Southern Oscillation (ENSO). It has been hypothesized that the mass balance of the Antarctic Ice Sheet, including its floating ice shelves, also responds to this climate signal; however, this has not yet been unambiguously demonstrated. We apply multivariate singular spectrum analysis (MSSA) to our 18-year (1994-2012) time series of ice-shelf height in the Amundsen Sea (AS) region. This advanced spectral method distinguishes between regular deterministic behavior ("cycles") at sub-decadal time scale and irregular behavior ("noise") at shorter time scales. Although the long-term trends of AS ice-shelf height changes are much larger than the range of interannual variability, the short-term rate of change dh/dt can vary about the trend by more than 50%. The mode of interannual variability in the AS ice-shelf height is strongly correlated with the low-frequency mode of ENSO (periodicity of ~4.5 years) as represented by the Southern Oscillation Index. The ice-shelf height in the AS is expected to respond to changes in precipitation and inflows of warm subsurface Circumpolar Deep Water (CDW) into the ocean cavities under the ice shelves, altering basal melt rates. Since both of these processes affecting ice-shelf mass balance respond to changes in wind fields for different ENSO states, we expect some correlation between them. We will describe the spatial structure of AS ice-shelf height response to ENSO, and attempt to distinguish the precipitation signal from basal mass balance due to changing CDW inflows.
NASA Astrophysics Data System (ADS)
Lin, Aijing; Shang, Pengjian
2016-04-01
Considering the diverse application of multifractal techniques in natural scientific disciplines, this work underscores the versatility of multiscale multifractal detrended fluctuation analysis (MMA) method to investigate artificial and real-world data sets. The modified MMA method based on cumulative distribution function is proposed with the objective of quantifying the scaling exponent and multifractality of nonstationary time series. It is demonstrated that our approach can provide a more stable and faithful description of multifractal properties in comprehensive range rather than fixing the window length and slide length. Our analyzes based on CDF-MMA method reveal significant differences in the multifractal characteristics in the temporal dynamics between US and Chinese stock markets, suggesting that these two stock markets might be regulated by very different mechanism. The CDF-MMA method is important for evidencing the stable and fine structure of multiscale and multifractal scaling behaviors and can be useful to deepen and broaden our understanding of scaling exponents and multifractal characteristics.
NASA Astrophysics Data System (ADS)
Iturri, Laura Antonela; Funk, Roger; Leue, Martin; Sommer, Michael; Buschiazzo, Daniel Eduardo
2017-10-01
There is little information about the mineral and organic composition of sediments eroded by wind at different heights. Because of that, wind tunnel simulations were performed on four agricultural loess soils of different granulometry and their saltating materials collected at different heights. The particulate matter with an aerodynamic diameter mainly smaller than 10 μm (PM10) of these soils was obtained separately by a laboratory method. Results indicated that the granulometric composition of sediments collected at different heights was more homogeneous in fine- than in sandy-textured soils, which were more affected by sorting effects during wind erosion. This agrees with the preferential transport of quartz at low heights and of clay minerals at greater heights. SOC contents increased with height, but the composition of the organic materials was different: stable carboxylic acids, aldehydes, amides and aromatics were preferentially transported close to the ground because their were found in larger aggregates, while plant debris and polysaccharides, carbohydrates and derivatives of microbial origin from organic matter dominated at greater heights for all soil types. The amount of SOC in the PM10 fraction was higher when it was emitted from sandy than from fine textured soils. Because of the sorting process produced by wind erosion, the stable organic matter compounds will be transported at low heights and local scales, modifying soil fertility due to nutrient exportation, while less stable organic compounds will be part of the suspension losses, which are known to affect some processes at regional- or global scale.
Kim, Seyoung; Park, Sukyung; Choi, Sangkyu
2014-09-22
In this study, we developed a curve-fit model of countermovement dynamics and examined whether the characteristics of a countermovement jump can be quantified using the model parameter and its scaling; we expected that the model-based analysis would facilitate an understanding of the basic mechanisms of force reduction and propulsion with a simplified framework of the center of mass (CoM) mechanics. Ten healthy young subjects jumped straight up to five different levels ranging from approximately 10% to 35% of their body heights. The kinematic and kinetic data on the CoM were measured using a force plate system synchronized with motion capture cameras. All subjects generated larger vertical forces compared with their body weights from the countermovement and sufficiently lowered their CoM position to support the work performed by push-off as the vertical elevations became more challenging. The model simulation reasonably reproduced the trajectories of vertical force during the countermovement, and the model parameters were replaced by linear and polynomial regression functions in terms of the vertical jump height. Gradual scaling trends of the individual model parameters were observed as a function of the vertical jump height with different degrees of scaling, depending on the subject. The results imply that the subjects may be aware of the jumping dynamics when subjected to various vertical jump heights and may select their countermovement strategies to effectively accommodate biomechanical constraints, i.e., limited force generation for the standing vertical jump. Copyright © 2014 Elsevier Ltd. All rights reserved.
Kinetics of Melting and Dissolution in Lunar Materials
NASA Technical Reports Server (NTRS)
Hess, Paul C.
2002-01-01
An understanding of the petrogenesis of lunar magmas, particularly mare basalts and the parent magmas to the Mg-rich suite, remains an unfulfilled goal. The fact is not surprising given the complexity of the problem. On the Moon, the source region for lunar magmas is not primitive mantle but rather a series of cumulate rocks that vary widely in both minerology and major and minor element contents. The stratigraphy of the cumulate mantle is not likely to be very regular given that the culumate pile is formed initially in an unstable configuration and subsequent thermal and compositional heterogeneities on a number of length scales. These lithologic heterogeneities, the large range of pressures and temperatures over which melts are generated on the Moon, and the close juxtaposition of cumulate rock with widely varying solidii introduce significant complications to the nature of the melting relations that control melt generation. These factors, coupled with the likelihood that polybaric fractional melting of varying efficiencies ultimately control the composition of planetary progress, are ample reasons why the lunar magmas remain the enigma they are. To make progress, phase equilibria studies must be coupled with a detailed understanding of the time scales and the dynamics of crystal and melt reequilibration processes.
NASA Astrophysics Data System (ADS)
Corwin, Ivan; Dimitrov, Evgeni
2018-05-01
We consider the ASEP and the stochastic six vertex model started with step initial data. After a long time, T, it is known that the one-point height function fluctuations for these systems are of order T 1/3. We prove the KPZ prediction of T 2/3 scaling in space. Namely, we prove tightness (and Brownian absolute continuity of all subsequential limits) as T goes to infinity of the height function with spatial coordinate scaled by T 2/3 and fluctuations scaled by T 1/3. The starting point for proving these results is a connection discovered recently by Borodin-Bufetov-Wheeler between the stochastic six vertex height function and the Hall-Littlewood process (a certain measure on plane partitions). Interpreting this process as a line ensemble with a Gibbsian resampling invariance, we show that the one-point tightness of the top curve can be propagated to the tightness of the entire curve.
A comparative analysis of rawinsonde and NIMBUS 6 and TIROS N satellite profile data
NASA Technical Reports Server (NTRS)
Scoggins, J. R.; Carle, W. E.; Knight, K.; Moyer, V.; Cheng, N. M.
1981-01-01
Comparisons are made between rawinsonde and satellite profiles in seven areas for a wide range of surface and weather conditions. Variables considered include temperature, dewpoint temperature, thickness, precipitable water, lapse rate of temperature, stability, geopotential height, mixing ratio, wind direction, wind speed, and kinematic parameters, including vorticity and the advection of vorticity and temperature. In addition, comparisons are made in the form of cross sections and synoptic fields for selected variables. Sounding data from the NIMBUS 6 and TIROS N satellites were used. Geostrophic wind computed from smoothed geopotential heights provided large scale flow patterns that agreed well with the rawinsonde wind fields. Surface wind patterns as well as magnitudes computed by use of the log law to extrapolate wind to a height of 10 m agreed with observations. Results of this study demonstrate rather conclusively that satellite profile data can be used to determine characteristics of large scale systems but that small scale features, such as frontal zones, cannot yet be resolved.
Counting on β-Diversity to Safeguard the Resilience of Estuaries
de Juan, Silvia; Thrush, Simon F.; Hewitt, Judi E.
2013-01-01
Coastal ecosystems are often stressed by non-point source and cumulative effects that can lead to local-scale community homogenisation and a concomitant loss of large-scale ecological connectivity. Here we investigate the use of β-diversity as a measure of both community heterogeneity and ecological connectivity. To understand the consequences of different environmental scenarios on heterogeneity and connectivity, it is necessary to understand the scale at which different environmental factors affect β-diversity. We sampled macrofauna from intertidal sites in nine estuaries from New Zealand’s North Island that represented different degrees of stress derived from land-use. We used multiple regression models to identify relationships between β-diversity and local sediment variables, factors related to the estuarine and catchment hydrodynamics and morphology and land-based stressors. At local scales, we found higher β-diversity at sites with a relatively high total richness. At larger scales, β-diversity was positively related to γ-diversity, suggesting that a large regional species pool was linked with large-scale heterogeneity in these systems. Local environmental heterogeneity influenced β-diversity at both local and regional scales, although variables at the estuarine and catchment scales were both needed to explain large scale connectivity. The estuaries expected a priori to be the most stressed exhibited higher variance in community dissimilarity between sites and connectivity to the estuary species pool. This suggests that connectivity and heterogeneity metrics could be used to generate early warning signals of cumulative stress. PMID:23755252
Despite the increasing use of urban stormwater green infrastructure (SGI), including detention ponds and rain gardens, few studies have quantified the cumulative effects of multiple SGI projects on hydrology and water quality at the watershed scale. To assess the effects of SGI, ...
Optimizing height presentation for aircraft cockpit displays
NASA Astrophysics Data System (ADS)
Jordan, Chris S.; Croft, D.; Selcon, Stephen J.; Markin, H.; Jackson, M.
1997-02-01
This paper describes an experiment conducted to investigate the type of display symbology that most effectively conveys height information to users of head-down plan-view radar displays. The experiment also investigated the use of multiple information sources (redundancy) in the design of such displays. Subjects were presented with eight different height display formats. These formats were constructed from a control, and/or one, two, or three sources of redundant information. The three formats were letter coding, analogue scaling, and toggling (spatially switching the position of the height information from above to below the aircraft symbol). Subjects were required to indicate altitude awareness via a four-key, forced-choice keyboard response. Error scores and response times were taken as performance measures. There were three main findings. First, there was a significant performance advantage when the altitude information was presented above and below the symbol to aid the representation of height information. Second, the analogue scale, a line whose length indicated altitude, proved significantly detrimental to performance. Finally, no relationship was found between the number of redundant information sources employed and performance. The implications for future aircraft and displays are discussed in relation to current aircraft tactical displays and in the context of perceptual psychological theory.
Cloud-top height retrieval from polarizing remote sensor POLDER
NASA Astrophysics Data System (ADS)
He, Xianqiang; Pan, Delu; Yan, Bai; Mao, Zhihua
2006-10-01
A new cloud-top height retrieval method is proposed by using polarizing remote sensing. In cloudy conditions, it shows that, in purple and blue bands, linear polarizing radiance at the top-of-atmosphere (TOA) is mainly contributed by Rayleigh scattering of the atmosphere's molecules above cloud, and the contribution by cloud reflection and aerosol scattering can be neglected. With such characteristics, the basis principle and method of cloud-top height retrieval using polarizing remote sensing are presented in detail, and tested by the polarizing remote sensing data of POLDER. The satellite-derived cloud-top height product can not only show the distribution of global cloud-top height, but also obtain the cloud-top height distribution of moderate-scale meteorological phenomena like hurricanes and typhoons. This new method is promising to become the operational algorithm for cloud-top height retrieval for POLDER and the future polarizing remote sensing satellites.
Teresiński, Grzegorz; Milaszkiewicz, Anna; Cywka, Tomasz
2016-01-01
Aim of the study: One of the basic issues discussed in forensic literature regarding falls from a height is determination of fall heights and differentiation between suicidal and accidental falls. The aim of the study was to verify the usefulness of the available methods for the purposes of forensic expertises. Material and methods: The study encompassed fatalities of falls from a height whose autopsies were performed in the Department of Forensic Medicine in Lublin. Results: Similarly to other authors, the severity of injuries was assessed using the Abbreviated Injury Scale (AIS) and injury severity score (ISS). The study findings demonstrated a statistically significant correlation between the fall height and the severity of injuries according to ISS and a statistically significant difference in fall heights between the groups of accidents and suicides.
The Separate and Cumulative Effects of TBI and PTSD on Cognitive Function and Emotional Control
2011-04-01
participants has been successful. Finally, subjects completed three standardized questionnaires: the Barratt Impulsiveness Scale (BIS), the PTSD Checklist...function tasks. Self-rated impulsivity on the Barratt Impulsiveness Scale (BIS) showed a modest correlation with performance in the 90% Go...Normative data and a short form of the Barratt Impulsiveness Scale. (2007). Int J Neurosci. 117(3):359-68. Swick D, Ashley V, Turken AU. (2008). Left
The Separate and Cumulative Effects of TBI and PTSD on Cognitive Function and Emotional Control
2010-04-01
Veteran control subjects. Finally, participants completed 3 standardized questionnaires: the Barratt Impulsiveness Scale (BIS), the PTSD Checklist...impulsivity on the Barratt Impulsiveness Scale (BIS) did not correlate with performance in the 50% Go condition (p=.12) or in the 90% Go condition...Normative data and a short form of the Barratt Impulsiveness Scale. (2007). Int J Neurosci. 117(3):359-68. Swick D, Ashley V, Turken AU. (2008
Heo, M; Kabat, G C; Gallagher, D; Heymsfield, S B; Rohan, T E
2013-08-01
Body mass index (BMI; weight (Wt)/height (Ht) (in kg m(-2)) and waist circumference (WC) are widely used as proxy anthropometric measures for total adiposity. Little is known about what scaling power of 'x' in both Wt(kg)/Ht(m)(x) and WC(m)/Ht(m)(x) is maximally associated with measured total body fat mass (TBFM). Establishing values for x would provide the information needed to create optimum anthropometric surrogate measures of adiposity. To estimate the value of 'x' that renders Wt/Ht(x) and WC/Ht(x) maximally associated with DXA-measured TBFM. Participants of the NHANES 1999-2004 surveys, stratified by sex (men, women), race/ethnicity (non-Hispanic whites, non-Hispanic blacks, Mexican-Americans), and age(18-29, 30-49, 50-84 years). We apply a grid search by increasing x from 0.0-3.0 by increments of 0.1 to the simple regression models, TBFM=b0+b1*(Wt/Ht(x)) and TBFM=b0+b1*(WC/Ht(x)) to obtain an estimate of x that results in the greatest R(2), taking into account complex survey design features and multiply imputed data. R(2)'s for BMI are 0.86 for men (N=6544) and 0.92 for women (N=6362). The optimal powers x for weight are 1.0 (R(2)=0.90) for men and 0.8 (R(2)=0.96) for women. The optimal power x for WC is 0, that is, no scaling of WC to height, for men (R(2)=0.90) or women (R(2)=0.82). The optimal powers for weight across nine combinations of race/ethnicity and age groups for each sex vary slightly (x=0.8-1.3) whereas the optimal scaling powers for WC are all 0 for both sexes except for non-Hispanic black men aged 18-29y (x=0.1). Although the weight-for-height indices with optimal powers are not independent of height, they yield more accurate TBFM estimates than BMI. In reference to TBFM, Wt/Ht and Wt/Ht(0.8) are the optimal weight-for-height indices for men and women, respectively, whereas WC alone, without Ht adjustment, is the optimal WC-for-height index for both sexes. Thus, BMI, an index independent of height, may be less useful when predicting TBFM.
Direct measurement of a patient's entrance skin dose during pediatric cardiac catheterization
Sun, Lue; Mizuno, Yusuke; Iwamoto, Mari; Goto, Takahisa; Koguchi, Yasuhiro; Miyamoto, Yuka; Tsuboi, Koji; Chida, Koichi; Moritake, Takashi
2014-01-01
Children with complex congenital heart diseases often require repeated cardiac catheterization; however, children are more radiosensitive than adults. Therefore, radiation-induced carcinogenesis is an important consideration for children who undergo those procedures. We measured entrance skin doses (ESDs) using radio-photoluminescence dosimeter (RPLD) chips during cardiac catheterization for 15 pediatric patients (median age, 1.92 years; males, n = 9; females, n = 6) with cardiac diseases. Four RPLD chips were placed on the patient's posterior and right side of the chest. Correlations between maximum ESD and dose–area products (DAP), total number of frames, total fluoroscopic time, number of cine runs, cumulative dose at the interventional reference point (IRP), body weight, chest thickness, and height were analyzed. The maximum ESD was 80 ± 59 (mean ± standard deviation) mGy. Maximum ESD closely correlated with both DAP (r = 0.78) and cumulative dose at the IRP (r = 0.82). Maximum ESD for coiling and ballooning tended to be higher than that for ablation, balloon atrial septostomy, and diagnostic procedures. In conclusion, we directly measured ESD using RPLD chips and found that maximum ESD could be estimated in real-time using angiographic parameters, such as DAP and cumulative dose at the IRP. Children requiring repeated catheterizations would be exposed to high radiation levels throughout their lives, although treatment influences radiation dose. Therefore, the radiation dose associated with individual cardiac catheterizations should be analyzed, and the effects of radiation throughout the lives of such patients should be followed. PMID:24968708
Interactive effects of cumulative stress and impulsivity on alcohol consumption.
Fox, Helen C; Bergquist, Keri L; Peihua, Gu; Rajita, Sinha
2010-08-01
Alcohol addiction may reflect adaptations to stress, reward, and regulatory brain systems. While extensive research has identified both stress and impulsivity as independent risk factors for drinking, few studies have assessed the interactive relationship between stress and impulsivity in terms of hazardous drinking within a community sample of regular drinkers. One hundred and thirty regular drinkers (56M/74F) from the local community were assessed for hazardous and harmful patterns of alcohol consumption using the Alcohol Use Disorders Identification Test (AUDIT). All participants were also administered the Barratt Impulsiveness Scale (BIS-11) as a measure of trait impulsivity and the Cumulative Stress/Adversity Checklist (CSC) as a comprehensive measure of cumulative adverse life events. Standard multiple regression models were used to ascertain the independent and interactive nature of both overall stress and impulsivity as well as specific types of stress and impulsivity on hazardous and harmful drinking. Recent life stress, cumulative traumatic stress, overall impulsivity, and nonplanning-related impulsivity as well as cognitive and motor-related impulsivity were all independently predictive of AUDIT scores. However, the interaction between cumulative stress and total impulsivity scores accounted for a significant amount of the variance, indicating that a high to moderate number of adverse events and a high trait impulsivity rating interacted to affect greater AUDIT scores. The subscale of cumulative life trauma accounted for the most variance in AUDIT scores among the stress and impulsivity subscales. Findings highlight the interactive relationship between stress and impulsivity with regard to hazardous drinking. The specific importance of cumulative traumatic stress as a marker for problem drinking is also discussed.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Holwerda, B. W.; Bouwens, R.; Trenti, M.
2014-06-10
We present a tally of Milky Way late-type dwarf stars in 68 Wide Field Camera 3 (WFC3) pure-parallel fields (227 arcmin{sup 2}) from the Brightest of Reionizing Galaxies survey for high-redshift galaxies. Using spectroscopically identified M-dwarfs in two public surveys, the Cosmic Assembly Near-IR Deep Extragalactic Legacy Survey and the Early Release Science mosaics, we identify a morphological selection criterion using the half-light radius (r {sub 50}), a near-infrared J – H, G – J color region where M-dwarfs are found, and a V – J relation with M-dwarf subtype. We apply this morphological selection of stellar objects, color-color selectionmore » of M-dwarfs, and optical-near-infrared color subtyping to compile a catalog of 274 M-dwarfs belonging to the disk of the Milky Way with a limiting magnitude of m {sub F125W} < 24(AB). Based on the M-dwarf statistics, we conclude that (1) the previously identified north-south discrepancy in M-dwarf numbers persists in our sample; there are more M-dwarfs in the northern fields on average than in southern ones, (2) the Milky Way's single disk scale-height for M-dwarfs is 0.3-4 kpc, depending on subtype, (3) the scale-height depends on M-dwarf subtype with early types (M0-4) high scale-height (z {sub 0} = 3-4 kpc) and later types M5 and above in the thin disk (z {sub 0} = 0.3-0.5 kpc), (4) a second component is visible in the vertical distribution, with a different, much higher scale-height in the southern fields compared to the northern ones. We report the M-dwarf component of the Sagittarius stream in one of our fields with 11 confirmed M-dwarfs, seven of which are at the stream's distance. In addition to the M-dwarf catalog, we report the discovery of 1 T-dwarfs and 30 L-dwarfs from their near-infrared colors. The dwarf scale-height and the relative low incidence in our fields of L- and T-dwarfs in these fields makes it unlikely that these stars will be interlopers in great numbers in color-selected samples of high-redshift galaxies. The relative ubiquity of M-dwarfs however will make them ideal tracers of Galactic halo substructure with EUCLID and reference stars for James Webb Space Telescope observations.« less
Fine-scale traverses in cumulate rocks, Stillwater Complex: A lunar analogue study
NASA Technical Reports Server (NTRS)
Elthon, Donald
1988-01-01
The objective was to document finite-scale compositional variations in cumulate rocks from the Stillwater Complex in Montana and to interpret these data in the context of planetary magma fractionation processes such as those operative during the formation of the Earth's Moon. This research problem involved collecting samples in the Stillwater Complex and analyzing them by electron microprobe, X-ray fluorescence (XRF), and instrumental neutron activation analysis (INAA). The electron microprobe is used to determine the compositions of cumulus and intercumulus phases in the rocks, the XRF is used to determine the bulk-rock major element and trace element (Y, Sr, Rb, Zr, Ni, and Cr) abundances, and the INAA lab. is used to determine the trace element (Sc, Co, Cr, Ni, Ta, Hf, U, Th, and the REE) abundances of mineral separates and bulk rocks.
NASA Astrophysics Data System (ADS)
Castro-Alvaredo, Olalla; Chen, Yixiong; Doyon, Benjamin; Hoogeveen, Marianne
2014-03-01
We evaluate the exact energy current and scaled cumulant generating function (related to the large-deviation function) in non-equilibrium steady states with energy flow, in any integrable model of relativistic quantum field theory (IQFT) with diagonal scattering. Our derivations are based on various recent results of Bernard and Doyon. The steady states are built by connecting homogeneously two infinite halves of the system thermalized at different temperatures Tl, Tr, and waiting for a long time. We evaluate the current J(Tl, Tr) using the exact QFT density matrix describing these non-equilibrium steady states and using Zamolodchikov’s method of the thermodynamic Bethe ansatz (TBA). The scaled cumulant generating function is obtained from the extended fluctuation relations which hold in integrable models. We verify our formula in particular by showing that the conformal field theory (CFT) result is obtained in the high-temperature limit. We analyze numerically our non-equilibrium steady-state TBA equations for three models: the sinh-Gordon model, the roaming trajectories model, and the sine-Gordon model at a particular reflectionless point. Based on the numerics, we conjecture that an infinite family of non-equilibrium c-functions, associated with the scaled cumulants, can be defined, which we interpret physically. We study the full scaled distribution function and find that it can be described by a set of independent Poisson processes. Finally, we show that the ‘additivity’ property of the current, which is known to hold in CFT and was proposed to hold more generally, does not hold in general IQFT—that is, J(Tl, Tr) is not of the form f(Tl) - f(Tr).
Gray, B.R.; Shi, W.; Houser, J.N.; Rogala, J.T.; Guan, Z.; Cochran-Biederman, J. L.
2011-01-01
Ecological restoration efforts in large rivers generally aim to ameliorate ecological effects associated with large-scale modification of those rivers. This study examined whether the effects of restoration efforts-specifically those of island construction-within a largely open water restoration area of the Upper Mississippi River (UMR) might be seen at the spatial scale of that 3476ha area. The cumulative effects of island construction, when observed over multiple years, were postulated to have made the restoration area increasingly similar to a positive reference area (a proximate area comprising contiguous backwater areas) and increasingly different from two negative reference areas. The negative reference areas represented the Mississippi River main channel in an area proximate to the restoration area and an open water area in a related Mississippi River reach that has seen relatively little restoration effort. Inferences on the effects of restoration were made by comparing constrained and unconstrained models of summer chlorophyll a (CHL), summer inorganic suspended solids (ISS) and counts of benthic mayfly larvae. Constrained models forced trends in means or in both means and sampling variances to become, over time, increasingly similar to those in the positive reference area and increasingly dissimilar to those in the negative reference areas. Trends were estimated over 12- (mayflies) or 14-year sampling periods, and were evaluated using model information criteria. Based on these methods, restoration effects were observed for CHL and mayflies while evidence in favour of restoration effects on ISS was equivocal. These findings suggest that the cumulative effects of island building at relatively large spatial scales within large rivers may be estimated using data from large-scale surveillance monitoring programs. Published in 2010 by John Wiley & Sons, Ltd.
Smith, David; Snyder, Craig D.; Hitt, Nathaniel P.; Young, John A.; Faulkner, Stephen P.
2012-01-01
Shale gas development may involve trade-offs between energy development and benefits provided by natural ecosystems. However, current best management practices (BMPs) focus on mitigating localized ecological degradation. We review evidence for cumulative effects of natural gas development on brook trout (Salvelinus fontinalis) and conclude that BMPs should account for potential watershed-scale effects in addition to localized influences. The challenge is to develop BMPs in the face of uncertainty in the predicted response of brook trout to landscape-scale disturbance caused by gas extraction. We propose a decision-analysis approach to formulating BMPs in the specific case of relatively undisturbed watersheds where there is consensus to maintain brook trout populations during gas development. The decision analysis was informed by existing empirical models that describe brook trout occupancy responses to landscape disturbance and set bounds on the uncertainty in the predicted responses to shale gas development. The decision analysis showed that a high efficiency of gas development (e.g., 1 well pad per square mile and 7 acres per pad) was critical to achieving a win-win solution characterized by maintaining brook trout and maximizing extraction of available gas. This finding was invariant to uncertainty in predicted response of brook trout to watershed-level disturbance. However, as the efficiency of gas development decreased, the optimal BMP depended on the predicted response, and there was considerable potential value in discriminating among predictive models through adaptive management or research. The proposed decision-analysis framework provides an opportunity to anticipate the cumulative effects of shale gas development, account for uncertainty, and inform management decisions at the appropriate spatial scales.
Spectroscopic Study of a Dark Lane and a Cool Loop in a Solar Limb Active Region by Hinode/EIS
NASA Astrophysics Data System (ADS)
Lee, K.; Imada, S.; Moon, Y.; Lee, J.
2012-12-01
We investigate a cool loop and a dark lane over a limb active region on 2007 March 14 by the Hinode/EUV Imaging Spectrometer (EIS). The cool loop is clearly seen in the EIS spectral lines formed at the transition region temperature (log T = 5.8). The dark lane is characterized by an elongated faint structure in coronal spectral lines (log T = 5.8 - 6.1) and rooted on a bright point. We examine their electron densities, Doppler velocities, and non-thermal velocities as a function of distance from the limb using the spectral lines formed at different temperatures (log T = 5.4 - 6.4). The electron densities of the cool loop and the dark lane are derived from the density sensitive line pairs of Mg VII, Fe XII, and Fe XIV spectra. Under the hydrostatic equilibrium and isothermal assumption, we determine their temperatures from the density scale height. Comparing the scale height temperatures to the peak formation temperatures of the spectral lines, we note that the scale height temperature of the cool loop is consistent with a peak formation temperature of the Mg VII (log T = 5.8) and the scale height temperature of the dark lane is close to a peak formation temperature of the Fe XII and Fe XIII (log T = 6.1 - 6.2). It is interesting to note that the structures of the cool loop and the dark lane are most visible in these temperature lines. While the non-thermal velocity in the cool loop slightly decreases (less than 7 km {s-1}) along the loop, that in the dark lane sharply falls off with height. The variation of non-thermal velocity with height in the cool loop and the dark lane is contrast to that in off-limb polar coronal holes which are considered as source of the fast solar wind. Such a decrease in the non-thermal velocity may be explained by wave damping near the solar surface or turbulence due to magnetic reconnection near the bright point.
Automatic Real Time Ionogram Scaler with True Height Analysis - Artist
1983-07-01
scaled. The corresponding autoscaled values were compared with the manual scaled h’F, h’F2, fminF, foE, foEs, h’E and hlEs. The ARTIST program...I ... , ·~ J .,\\; j~~·n! I:\\’~ .. IC HT:/\\L rritw!E I ONOGI\\AM SCALER ’:!"[’!’if T:\\!_1!: H~:IGHT ANALYSIS - ARTIST P...S. TYPE OF REPORT & PERiCO COVERED Scientific Report No. 7 AUTOMATIC REAL TIME IONOGRAM SCALER WITH TRUE HEIGHT ANALYSIS - ARTIST 6. PERFORMING OG
The impact of cumulative pain/stress on neurobehavioral development of preterm infants in the NICU.
Cong, Xiaomei; Wu, Jing; Vittner, Dorothy; Xu, Wanli; Hussain, Naveed; Galvin, Shari; Fitzsimons, Megan; McGrath, Jacqueline M; Henderson, Wendy A
2017-05-01
Vulnerable preterm infants experience repeated and prolonged pain/stress stimulation during a critical period in their development while in the neonatal intensive care unit (NICU). The contribution of cumulative pain/stressors to altered neurodevelopment remains unclear. The study purpose was to investigate the impact of early life painful/stressful experiences on neurobehavioral outcomes of preterm infants in the NICU. A prospective exploratory study was conducted with fifty preterm infants (28 0/7-32 6/7weeks gestational age) recruited at birth and followed for four weeks. Cumulative pain/stressors (NICU Infant Stressor Scale) were measured daily and neurodevelopmental outcomes (NICU Network Neurobehavioral Scale) were examined at 36-37weeks post-menstrual age. Data analyses were conducted on the distribution of pain/stressors experienced over time and the linkages among pain/stressors and neurobehavioral outcomes. Preterm infants experienced a high degree of pain/stressors in the NICU, both in numbers of daily acute events (22.97±2.30 procedures) and cumulative times of chronic/stressful exposure (42.59±15.02h). Both acute and chronic pain/stress experienced during early life significantly contributed to the neurobehavioral outcomes, particularly in stress/abstinence (p<0.05) and habituation responses (p<0.01), meanwhile, direct breastfeeding and skin-to-skin holding were also significantly associated with habituation (p<0.01-0.05). Understanding mechanisms by which early life experience alters neurodevelopment will assist clinicians in developing targeted neuroprotective strategies and individualized interventions to improve infant developmental outcomes. Copyright © 2017 Elsevier B.V. All rights reserved.
Bécares, Laia; Zhang, Nan
2018-01-01
Abstract Experiencing discrimination is associated with poor mental health, but how cumulative experiences of perceived interpersonal discrimination across attributes, domains, and time are associated with mental disorders is still unknown. Using data from the Study of Women’s Health Across the Nation (1996–2008), we applied latent class analysis and generalized linear models to estimate the association between cumulative exposure to perceived interpersonal discrimination and older women’s mental health. We found 4 classes of perceived interpersonal discrimination, ranging from cumulative exposure to discrimination over attributes, domains, and time to none or minimal reports of discrimination. Women who experienced cumulative perceived interpersonal discrimination over time and across attributes and domains had the highest risk of depression (Center for Epidemiologic Studies Depression Scale score ≥16) compared with women in all other classes. This was true for all women regardless of race/ethnicity, although the type and severity of perceived discrimination differed across racial/ethnic groups. Cumulative exposure to perceived interpersonal discrimination across attributes, domains, and time has an incremental negative long-term association with mental health. Studies that examine exposure to perceived discrimination due to a single attribute in 1 domain or at 1 point in time underestimate the magnitude and complexity of discrimination and its association with health. PMID:29036550
A new method to cluster genomes based on cumulative Fourier power spectrum.
Dong, Rui; Zhu, Ziyue; Yin, Changchuan; He, Rong L; Yau, Stephen S-T
2018-06-20
Analyzing phylogenetic relationships using mathematical methods has always been of importance in bioinformatics. Quantitative research may interpret the raw biological data in a precise way. Multiple Sequence Alignment (MSA) is used frequently to analyze biological evolutions, but is very time-consuming. When the scale of data is large, alignment methods cannot finish calculation in reasonable time. Therefore, we present a new method using moments of cumulative Fourier power spectrum in clustering the DNA sequences. Each sequence is translated into a vector in Euclidean space. Distances between the vectors can reflect the relationships between sequences. The mapping between the spectra and moment vector is one-to-one, which means that no information is lost in the power spectra during the calculation. We cluster and classify several datasets including Influenza A, primates, and human rhinovirus (HRV) datasets to build up the phylogenetic trees. Results show that the new proposed cumulative Fourier power spectrum is much faster and more accurately than MSA and another alignment-free method known as k-mer. The research provides us new insights in the study of phylogeny, evolution, and efficient DNA comparison algorithms for large genomes. The computer programs of the cumulative Fourier power spectrum are available at GitHub (https://github.com/YaulabTsinghua/cumulative-Fourier-power-spectrum). Copyright © 2018. Published by Elsevier B.V.
NASA Astrophysics Data System (ADS)
Domino, Krzysztof
2017-02-01
The cumulant analysis plays an important role in non Gaussian distributed data analysis. The shares' prices returns are good example of such data. The purpose of this research is to develop the cumulant based algorithm and use it to determine eigenvectors that represent investment portfolios with low variability. Such algorithm is based on the Alternating Least Square method and involves the simultaneous minimisation 2'nd- 6'th cumulants of the multidimensional random variable (percentage shares' returns of many companies). Then the algorithm was tested during the recent crash on the Warsaw Stock Exchange. To determine incoming crash and provide enter and exit signal for the investment strategy the Hurst exponent was calculated using the local DFA. It was shown that introduced algorithm is on average better that benchmark and other portfolio determination methods, but only within examination window determined by low values of the Hurst exponent. Remark that the algorithm is based on cumulant tensors up to the 6'th order calculated for a multidimensional random variable, what is the novel idea. It can be expected that the algorithm would be useful in the financial data analysis on the world wide scale as well as in the analysis of other types of non Gaussian distributed data.
NASA Astrophysics Data System (ADS)
Köhler, P.; Huth, A.
2010-08-01
The canopy height h of forests is a key variable which can be obtained using air- or spaceborne remote sensing techniques such as radar interferometry or LIDAR. If new allometric relationships between canopy height and the biomass stored in the vegetation can be established this would offer the possibility for a global monitoring of the above-ground carbon content on land. In the absence of adequate field data we use simulation results of a tropical rain forest growth model to propose what degree of information might be generated from canopy height and thus to enable ground-truthing of potential future satellite observations. We here analyse the correlation between canopy height in a tropical rain forest with other structural characteristics, such as above-ground life biomass (AGB) (and thus carbon content of vegetation) and leaf area index (LAI) and identify how correlation and uncertainty vary for two different spatial scales. The process-based forest growth model FORMIND2.0 was applied to simulate (a) undisturbed forest growth and (b) a wide range of possible disturbance regimes typically for local tree logging conditions for a tropical rain forest site on Borneo (Sabah, Malaysia) in South-East Asia. In both undisturbed and disturbed forests AGB can be expressed as a power-law function of canopy height h (AGB = a · hb) with an r2 ~ 60% if data are analysed in a spatial resolution of 20 m × 20 m (0.04 ha, also called plot size). The correlation coefficient of the regression is becoming significant better in the disturbed forest sites (r2 = 91%) if data are analysed hectare wide. There seems to exist no functional dependency between LAI and canopy height, but there is also a linear correlation (r2 ~ 60%) between AGB and the area fraction of gaps in which the canopy is highly disturbed. A reasonable agreement of our results with observations is obtained from a comparison of the simulations with permanent sampling plot (PSP) data from the same region and with the large-scale forest inventory in Lambir. We conclude that the spaceborne remote sensing techniques such as LIDAR and radar interferometry have the potential to quantify the carbon contained in the vegetation, although this calculation contains due to the heterogeneity of the forest landscape structural uncertainties which restrict future applications to spatial averages of about one hectare in size. The uncertainties in AGB for a given canopy height are here 20-40% (95% confidence level) corresponding to a standard deviation of less than ± 10%. This uncertainty on the 1 ha-scale is much smaller than in the analysis of 0.04 ha-scale data. At this small scale (0.04 ha) AGB can only be calculated out of canopy height with an uncertainty which is at least of the magnitude of the signal itself due to the natural spatial heterogeneity of these forests.
The Importance of Postural Cues for Determining Eye Height in Immersive Virtual Reality
Leyrer, Markus; Linkenauger, Sally A.; Bülthoff, Heinrich H.; Mohler, Betty J.
2015-01-01
In human perception, the ability to determine eye height is essential, because eye height is used to scale heights of objects, velocities, affordances and distances, all of which allow for successful environmental interaction. It is well understood that eye height is fundamental to determine many of these percepts. Yet, how eye height itself is provided is still largely unknown. While the information potentially specifying eye height in the real world is naturally coincident in an environment with a regular ground surface, these sources of information can be easily divergent in similar and common virtual reality scenarios. Thus, we conducted virtual reality experiments where we manipulated the virtual eye height in a distance perception task to investigate how eye height might be determined in such a scenario. We found that humans rely more on their postural cues for determining their eye height if there is a conflict between visual and postural information and little opportunity for perceptual-motor calibration is provided. This is demonstrated by the predictable variations in their distance estimates. Our results suggest that the eye height in such circumstances is informed by postural cues when estimating egocentric distances in virtual reality and consequently, does not depend on an internalized value for eye height. PMID:25993274
The importance of postural cues for determining eye height in immersive virtual reality.
Leyrer, Markus; Linkenauger, Sally A; Bülthoff, Heinrich H; Mohler, Betty J
2015-01-01
In human perception, the ability to determine eye height is essential, because eye height is used to scale heights of objects, velocities, affordances and distances, all of which allow for successful environmental interaction. It is well understood that eye height is fundamental to determine many of these percepts. Yet, how eye height itself is provided is still largely unknown. While the information potentially specifying eye height in the real world is naturally coincident in an environment with a regular ground surface, these sources of information can be easily divergent in similar and common virtual reality scenarios. Thus, we conducted virtual reality experiments where we manipulated the virtual eye height in a distance perception task to investigate how eye height might be determined in such a scenario. We found that humans rely more on their postural cues for determining their eye height if there is a conflict between visual and postural information and little opportunity for perceptual-motor calibration is provided. This is demonstrated by the predictable variations in their distance estimates. Our results suggest that the eye height in such circumstances is informed by postural cues when estimating egocentric distances in virtual reality and consequently, does not depend on an internalized value for eye height.
Geary, Phillip; Lucas, Steven
2018-02-03
Aquaculture in many coastal estuaries is threatened by diffuse sources of runoff from different land use activities. The poor performance of septic tank systems (STS), as well as runoff from agriculture, may contribute to the movement of contaminants through ground and surface waters to estuaries resulting in oyster contamination, and following their consumption, impacts to human health. In monitoring individual STS in sensitive locations, it is possible to show that nutrients and faecal contaminants are transported through the subsurface in sandy soils off-site with little attenuation. At the catchment scale however, there are always difficulties in discerning direct linkages between failing STS and water contamination due to processes such as effluent dilution, adsorption, precipitation and vegetative uptake. There is often substantial complexity in detecting and tracing effluent pathways from diffuse sources to water bodies in field studies. While source tracking as well as monitoring using tracers may assist in identifying potential pathways from STS to surface waters and estuaries, there are difficulties in scaling up from monitored individual systems to identify their contribution to the cumulative impact which may be apparent at the catchment scale. The processes which may be obvious through monitoring and dominate at the individual scale may be masked and not readily discernible at the catchment scale due to impacts from other land use activities.
Moser, Gerald; Schuldt, Bernhard; Hertel, Dietrich; Horna, Viviana; Coners, Heinz; Barus, Henry; Leuschner, Christoph
2014-05-01
Climate change scenarios predict increases in the frequency and duration of ENSO-related droughts for parts of South-East Asia until the end of this century exposing the remaining rainforests to increasing drought risk. A pan-tropical review of recorded drought-related tree mortalities in more than 100 monitoring plots before, during and after drought events suggested a higher drought-vulnerability of trees in South-East Asian than in Amazonian forests. Here, we present the results of a replicated (n = 3 plots) throughfall exclusion experiment in a perhumid tropical rainforest in Sulawesi, Indonesia. In this first large-scale roof experiment outside semihumid eastern Amazonia, 60% of the throughfall was displaced during the first 8 months and 80% during the subsequent 17 months, exposing the forest to severe soil desiccation for about 17 months. In the experiment's second year, wood production decreased on average by 40% with largely different responses of the tree families (ranging from -100 to +100% change). Most sensitive were trees with high radial growth rates under moist conditions. In contrast, tree height was only a secondary factor and wood specific gravity had no influence on growth sensitivity. Fine root biomass was reduced by 35% after 25 months of soil desiccation while fine root necromass increased by 250% indicating elevated fine root mortality. Cumulative aboveground litter production was not significantly reduced in this period. The trees from this Indonesian perhumid rainforest revealed similar responses of wood and litter production and root dynamics as those in two semihumid Amazonian forests subjected to experimental drought. We conclude that trees from paleo- or neotropical forests growing in semihumid or perhumid climates may not differ systematically in their growth sensitivity and vitality under sublethal drought stress. Drought vulnerability may depend more on stem cambial activity in moist periods than on tree height or wood specific gravity. © 2013 John Wiley & Sons Ltd.
Energy Current Cumulants in One-Dimensional Systems in Equilibrium
NASA Astrophysics Data System (ADS)
Dhar, Abhishek; Saito, Keiji; Roy, Anjan
2018-06-01
A recent theory based on fluctuating hydrodynamics predicts that one-dimensional interacting systems with particle, momentum, and energy conservation exhibit anomalous transport that falls into two main universality classes. The classification is based on behavior of equilibrium dynamical correlations of the conserved quantities. One class is characterized by sound modes with Kardar-Parisi-Zhang scaling, while the second class has diffusive sound modes. The heat mode follows Lévy statistics, with different exponents for the two classes. Here we consider heat current fluctuations in two specific systems, which are expected to be in the above two universality classes, namely, a hard particle gas with Hamiltonian dynamics and a harmonic chain with momentum conserving stochastic dynamics. Numerical simulations show completely different system-size dependence of current cumulants in these two systems. We explain this numerical observation using a phenomenological model of Lévy walkers with inputs from fluctuating hydrodynamics. This consistently explains the system-size dependence of heat current fluctuations. For the latter system, we derive the cumulant-generating function from a more microscopic theory, which also gives the same system-size dependence of cumulants.
Esker, P D; Obrycki, J; Nutter, F W
2004-02-01
Field studies were conducted in Iowa during 2001 and 2002 to determine the optimal sampling height and orientation for using yellow sticky cards to monitor populations of Chaetocnema pulicaria Melsheimer, the vector of the bacterial pathogen Pantoea stewartii subsp, stewartii, the causal organism of Stewart's disease of corn, Zea mays L.. Sticky cards were placed at five different heights (0.15, 0.30, 0.45, 0.60, and 0.90 m) and three orientations (horizontal, vertical, and 30 degree angle) at three locations (Ames, Crawfordsville, and Sutherland) in 2001 and two locations (Crawfordsville and Johnston) in 2002. No statistical differences were observed among the placement combinations for individual sampling periods or for the total number of C. pulicaria captured in 2001. In 2002, the 0.30 m and vertical cards captured significantly (1.1-35 times) more C. pulicaria than any other placement combination during sampling throughout August at both Crawfordsville and Johnston. Also, the cumulative number of C. pulicaria captured by the 0.30 m and vertical cards was significantly higher than all other placement combinations. This information is important in the development of sampling protocols to aid growers in making management decisions. These management decisions include where and when to apply foliar insecticides during the corn growing season to control C. pulicaria populations, thereby reducing the risk for Stewart's disease of corn.
McPherson, Malcolm J.; Bellman, Robert A.
1984-01-01
A precision manometer gauge which locates a zero height and a measured height of liquid using an open tube in communication with a reservoir adapted to receive the pressure to be measured. The open tube has a reference section carried on a positioning plate which is moved vertically with machine tool precision. Double scales are provided to read the height of the positioning plate accurately, the reference section being inclined for accurate meniscus adjustment, and means being provided to accurately locate a zero or reference position.
McPherson, M.J.; Bellman, R.A.
1982-09-27
A precision manometer gauge which locates a zero height and a measured height of liquid using an open tube in communication with a reservoir adapted to receive the pressure to be measured. The open tube has a reference section carried on a positioning plate which is moved vertically with machine tool precision. Double scales are provided to read the height of the positioning plate accurately, the reference section being inclined for accurate meniscus adjustment, and means being provided to accurately locate a zero or reference position.
Orbital and physical characteristics of meter-scale impactors from airburst observations
NASA Astrophysics Data System (ADS)
Brown, P.; Wiegert, P.; Clark, D.; Tagliaferri, E.
2016-03-01
We have analyzed the orbits and ablation characteristics in the atmosphere of 59 Earth-impacting fireballs, produced by meteoroids 1 m in diameter or larger, described here as meter-scale. Using heights at peak luminosity as a proxy for strength, we determine that there is roughly an order of magnitude spread in strengths of the population of meter-scale impactors at the Earth. We use fireballs producing recovered meteorites and well documented fireballs from ground-based camera networks to calibrate our ablation model interpretation of the observed peak height of luminosity as a function of speed. The orbits and physical strength of these objects are consistent with the majority being asteroidal bodies originating from the inner main asteroid belt. This is in contrast to earlier suggestions by Ceplecha (Ceplecha, Z. [1994]. Astron. Astrophys. 286, 967-970) that the majority of meter-tens of meter sized meteoroids are ;… cometary bodies of the weakest known structure;. We find a lower limit of ∼10-15% of our objects have a possible cometary (Jupiter-Family comet and/or Halley-type comet) origin based on orbital characteristics alone. Only half this number, however, also show evidence for weaker than average structure. Two events, Sumava and USG 20131121, have exceptionally high (relative to the remainder of the population) heights of peak brightness. These are physically most consistent with high microporosity objects, though both were on asteroidal-type orbits. We also find three events, including the Oct 8, 2009 airburst near Sulawesi, Indonesia, which display comparatively low heights of peak brightness, consistent with strong monolithic stones or iron meteoroids. Based on orbital similarity, we find a probable connection among several events in our population with the Taurid meteoroid complex; no other major meteoroid streams show probable linkages to the orbits of our meter-scale population. Our impactors cover almost four orders of magnitude in mass, but no trend in height of peak brightness as a function of mass is evident, suggesting no strong trend in strength with size for meter-scale impactors consistent with the results of Popova et al. (Popova, O.P. et al. [2011]. Meteorit. Planet. Sci. 46, 1525-1550).
Being overweight: negative outcomes for African American adolescents.
Setiloane, Kelebogile
2004-01-01
The present study looked at how bodyweight affected African American adolescents their physical characteristics of height and weight, their behavioral characteristics of eating preferences, and their psychological characteristics of self-esteem and locus of control. In the summer of 2002 29 African-American adolescents who were participating in a one month Summer Institute were questioned on the perceptions of their weight and their food practices. They also completed self-esteem and locus of control scales. The Self-esteem scales used were the Rosenberg Self-Esteem scale (RSE), the Rosenberg-Simmons Self-Esteem scale (RSSE), the Rosenberg Depressive Affect scale (RDA), and the Rosenberg Self-Consciousness scale (RSC) The subjects had their height and weight measured and their calculated Body Mass Index (BMI) was divided into high BMI's (124 and above) and low BMI's (123 and below). High BMI's thought they were significantly heavier than low BMI's (p = 0.5), and drank more soft drinks (p = 0.1) than low BMI's. Further, the high BMI group had significantly lower self-esteem than the low BMI group on the RSE scale (p = 0.03) and the RSSE scale (p = 0.02).
The NASA/MSFC Global Reference Atmospheric Model-1995 version (GRAM-95)
NASA Technical Reports Server (NTRS)
Justus, C. G.; Jeffries, W. R., III; Yung, S. P.; Johnson, D. L.
1995-01-01
The latest version of the Global Reference Atmospheric Model (GRAM-95) is presented and discussed. GRAM-95 uses the new Global Upper Air Climatic Atlas (GUACA) CD-ROM data set, for 0- to 27-km altitudes. As with earlier versions, GRAM-95 provides complete geographical and altitude coverage for each month of the year. Individual years 1985 to 1991 and a period-of-record (1980 to 1991) can be simulated for the GUACA height range. GRAM-95 uses a specially developed data set, based on Middle Atmosphere Program (MAP) data, for the 20- to 120-km height range, and the NASA Marshall Engineering Thermosphere (MET) model for heights above 90 km. Fairing techniques assure a smooth transition in the overlap height ranges (20 to 27 km and 90 to 120 km). In addition to the traditional GRAM variables of pressure, density, temperature and wind components, GRAM-95 now includes water vapor and 11 other atmospheric constituents (O3, N2O, CO, CH4, CO2, N2, O2, O, A, He, and H). A new, variable-scale perturbation model provides both large-scale and small-scale deviations from mean values for the thermodynamic variables and horizontal and vertical wind components. The perturbation model includes new features that simulate intermittency (patchiness) in turbulence and small-scale perturbation fields. The density perturbations and density gradients (density shears) computed by the new model compare favorably in their statistical characteristics with observed density perturbations and density shears from 32 space shuttle reentry profiles. GRAM-95 provides considerable improvement in wind estimates from the new GUACA data set, compared to winds calculated from the geostrophic wind relations previously used in the 0- to 25-km height range. The GRAM-95 code has been put into a more modular form, easier to incorporate as subroutines in other programs (e.g., trajectory codes). A complete user's guide for running the program, plus sample input and output, is provided.
Surface-Based 3d measurements of aeolian bedforms on Mars
NASA Astrophysics Data System (ADS)
Balme, Matthew; Robson, Ellen; Barnes, Robert; Huber, Ben; Butcher, Frances; Fawdon, Peter; Gupta, Sanjeev; Paar, Gerhard
2017-04-01
The surface of Mars hosts many different types of aeolian bedforms, from small wind-ripples with cm-scale wavelength, through decametre-scale "Transverse Aeolian Ridges" (TARs), to km-scale dunes. To date, all mobile Mars surface-missions ('Rovers') have encountered aeolian bedforms of one kind or another. Aeolian deposits of loose, unconsolidated material provide hazards to Mars Rovers: sinkage into the aeolian material and enhanced slippage can prevent traction and forward progress, forcing the Rover to backtrack (e.g., MER Opportunity) and can even 'trap' the rover ending the mission (e.g., MER Spirit). Here, we present morphometry measurements of meter-scale ripple-like bedforms on Mars, as observed by the MER Opportunity Rover during its traverse across the Meridiani Planum region of Mars. The aim is to assess whether there is a relationship between bedforms parameters that can be measured from orbit such as length and width, and bedform height, which can only be reliably measured from orbit for larger features such as TARs. If such a relationship can be found, it might allow estimates of ripple-height to be made from remote sensing data alone. This could help understand the formation mechanism and provide a better characterization of the hazard presented by these features. For much of the first 30 km of the traverse, Opportunity travelled across flat plains with meter-scale, ripple-like aeolian bedforms ("plains ripples") superposed upon them. During the traverse, the Rover acquired stereo imaging data of its surroundings using both its scientific Pancam cameras system and the navigational Navcam system. Using these data, and newly developed Pro3D™ and PRoViP™ software from Joanneum Research, we obtained Digital Elevation Models of many areas along the traverse, allowing us to measure the heights, widths and lengths of aeolian bedforms. In addition, the same bedforms were digitized from orbital HiRISE image data (25 cm/pix resolution) in ArcGIS software to check for agreement between the ground-based and space-based measurements. We found that there is a clear correlation between bedform height and bedform length (as measured perpendicular to the bedform ridge crest and thus, by inference, parallel to the bedform forming wind). We find that bedform height is about 1/15th of bedform length (or bedform wavelength where bedforms are "saturated") - in agreement with terrestrial measurements of granule ripples. This relationship, and the distribution of bedforms heights observed for different bedforms lengths, can be used to provide a probabilistic method of determining the height distributions of bedforms in a given area, simply by measuring their lengths from orbit. This will be useful for determining traversability by Rovers, and so is helpful both for landing site selection and strategic planning of Rover routes.
Ionospheric Convection and Structure Using Ground-Based Digital Ionosondes
1988-02-01
M(3000)F2 were provided by the autoscaling software ARTIST which is part of the Digisonde /6, 7/. The virtual height traces scaled from the ionograms...using ARTIST were passed to the true-height analyuis program POLAN /8/, to pro- vide reliable estimates of hmF2. DISCREPANCIES BETWEEN POLAN AND
Interactive Effects of Cumulative Stress and Impulsivity on Alcohol Consumption
Fox, Helen C.; Bergquist, Keri L.; Gu, Peihua; Sinha, Rajita
2013-01-01
Background Alcohol addiction may reflect adaptations to stress, reward, and regulatory brain systems. While extensive research has identified both stress and impulsivity as independent risk factors for drinking, few studies have assessed the interactive relationship between stress and impulsivity in terms of hazardous drinking within a community sample of regular drinkers. Methods One hundred and thirty regular drinkers (56M/74F) from the local community were assessed for hazardous and harmful patterns of alcohol consumption using the Alcohol Use Disorders Identification Test (AUDIT). All participants were also administered the Barratt Impulsiveness Scale (BIS-11) as a measure of trait impulsivity and the Cumulative Stress/Adversity Checklist (CSC) as a comprehensive measure of cumulative adverse life events. Standard multiple regression models were used to ascertain the independent and interactive nature of both overall stress and impulsivity as well as specific types of stress and impulsivity on hazardous and harmful drinking. Results Recent life stress, cumulative traumatic stress, overall impulsivity, and nonplanning-related impulsivity as well as cognitive and motor-related impulsivity were all independently predictive of AUDIT scores. However, the interaction between cumulative stress and total impulsivity scores accounted for a significant amount of the variance, indicating that a high to moderate number of adverse events and a high trait impulsivity rating interacted to affect greater AUDIT scores. The subscale of cumulative life trauma accounted for the most variance in AUDIT scores among the stress and impulsivity subscales. Conclusions Findings highlight the interactive relationship between stress and impulsivity with regard to hazardous drinking. The specific importance of cumulative traumatic stress as a marker for problem drinking is also discussed. PMID:20491738
Nikulina, Valentina; Gelin, Melissa; Zwilling, Amanda
2017-12-01
Adverse childhood experiences (ACEs) have been shown to cumulatively predict a range of poor physical and mental health outcomes across adulthood. The cumulative effect of ACEs on intimate partner violence (IPV) in emerging adulthood has not been previously explored. The current study examined the individual and cumulative associations between nine ACEs (emotional abuse, physical abuse, sexual abuse, emotional neglect, physical neglect, witnessing domestic violence, living with a mentally ill, substance abusing, or incarcerated household member) and IPV in a diverse sample of college students ( N = 284; M age = 20.05 years old [ SD = 2.5], 32% male, 37% Caucasian, 30% Asian, 33% other, and 27% Hispanic) from an urban, public college in the Northeast of the United States. Participants reported ACEs (measured by the Adverse Childhood Experiences Survey) and IPV perpetration and victimization (measured with the Revised Conflict Tactics Scale-2) of physical and psychological aggression in an online study that took place from 2015 to 2016. Bivariate and multivariate associations between ACEs, cumulative ACEs (assessed by the sum of adverse experiences), and IPV outcomes were assessed, while controlling for demographics and socioeconomic status. No cumulative associations were observed between ACEs and any of the IPV subscales in multivariate regressions, while witnessing domestic violence was significantly associated with perpetration and victimization of physical aggression and injury, and household member incarceration and physical abuse were associated with physical aggression perpetration. Adverse childhood events do not seem to associate cumulatively with IPV in emerging adulthood and the contributions of individual childhood experiences appear to be more relevant for IPV outcomes. Clinical and research implications are discussed.
Lewison, Rebecca L.; Crowder, Larry B.; Wallace, Bryan P.; Moore, Jeffrey E.; Cox, Tara; Zydelis, Ramunas; McDonald, Sara; DiMatteo, Andrew; Dunn, Daniel C.; Kot, Connie Y.; Bjorkland, Rhema; Kelez, Shaleyla; Soykan, Candan; Stewart, Kelly R.; Sims, Michelle; Boustany, Andre; Read, Andrew J.; Halpin, Patrick; Nichols, W. J.; Safina, Carl
2014-01-01
Recent research on ocean health has found large predator abundance to be a key element of ocean condition. Fisheries can impact large predator abundance directly through targeted capture and indirectly through incidental capture of nontarget species or bycatch. However, measures of the global nature of bycatch are lacking for air-breathing megafauna. We fill this knowledge gap and present a synoptic global assessment of the distribution and intensity of bycatch of seabirds, marine mammals, and sea turtles based on empirical data from the three most commonly used types of fishing gears worldwide. We identify taxa-specific hotspots of bycatch intensity and find evidence of cumulative impacts across fishing fleets and gears. This global map of bycatch illustrates where data are particularly scarce—in coastal and small-scale fisheries and ocean regions that support developed industrial fisheries and millions of small-scale fishers—and identifies fishing areas where, given the evidence of cumulative hotspots across gear and taxa, traditional species or gear-specific bycatch management and mitigation efforts may be necessary but not sufficient. Given the global distribution of bycatch and the mitigation success achieved by some fleets, the reduction of air-breathing megafauna bycatch is both an urgent and achievable conservation priority. PMID:24639512
Lewison, Rebecca L; Crowder, Larry B; Wallace, Bryan P; Moore, Jeffrey E; Cox, Tara; Zydelis, Ramunas; McDonald, Sara; DiMatteo, Andrew; Dunn, Daniel C; Kot, Connie Y; Bjorkland, Rhema; Kelez, Shaleyla; Soykan, Candan; Stewart, Kelly R; Sims, Michelle; Boustany, Andre; Read, Andrew J; Halpin, Patrick; Nichols, W J; Safina, Carl
2014-04-08
Recent research on ocean health has found large predator abundance to be a key element of ocean condition. Fisheries can impact large predator abundance directly through targeted capture and indirectly through incidental capture of nontarget species or bycatch. However, measures of the global nature of bycatch are lacking for air-breathing megafauna. We fill this knowledge gap and present a synoptic global assessment of the distribution and intensity of bycatch of seabirds, marine mammals, and sea turtles based on empirical data from the three most commonly used types of fishing gears worldwide. We identify taxa-specific hotspots of bycatch intensity and find evidence of cumulative impacts across fishing fleets and gears. This global map of bycatch illustrates where data are particularly scarce--in coastal and small-scale fisheries and ocean regions that support developed industrial fisheries and millions of small-scale fishers--and identifies fishing areas where, given the evidence of cumulative hotspots across gear and taxa, traditional species or gear-specific bycatch management and mitigation efforts may be necessary but not sufficient. Given the global distribution of bycatch and the mitigation success achieved by some fleets, the reduction of air-breathing megafauna bycatch is both an urgent and achievable conservation priority.
Disorder in the Disk: The Influence of Accretion Disk Thickness on the Large-scale Magnetic Dynamo.
NASA Astrophysics Data System (ADS)
Hogg, J. Drew; Reynolds, Christopher S.
2018-01-01
The evolution of the magnetic field from the enigmatic large-scale dynamo is often considered a central feature of the accretion disk around a black hole. The resulting low-frequency oscillations introduced from the growth and decay of the field strength, along with the change in field orientation, are thought to be intimately tied to variability from the disk. Several factors are at play, but the dynamo can either be directly tied to observable signatures through modulation of the heating rate, or indirectly as the source of quasiperiodic oscillations, the driver of nonlinear structure from propagating fluctuations in mass accretion rate, or even the trigger of state transitions. We present a selection of results from a recent study of this process using a suite of four global, high-resolution, MHD accretion disk simulations. We systematically vary the scale height ratio and find the large-scale dynamo fails to develop above a scale height ratio of h/r ≥ 0.2. Using “butterfly” diagrams of the azimuthal magnetic field, we show the large-scale dynamo exists in the thinner accretion disk models, but fails to excite when the scale height ratio is increased, a feature which is also reflected in 2D Fourier transforms. Additionally, we calculate the dynamo α-parameter through correlations in the averaged magnetic field and turbulent electromotive force, and also generate synthetic light curves from the disk cooling. Using our emission proxy, we find the disks have markedly different characters as photometric fluctuations are larger and less ordered when the disk is thicker and the dynamo is absent.
Statistical theory for the Kardar-Parisi-Zhang equation in (1+1) dimensions.
Masoudi, A A; Shahbazi, F; Davoudi, J; Tabar, M Reza Rahimi
2002-02-01
The Kardar-Parisi-Zhang (KPZ) equation in (1+1) dimensions dynamically develops sharply connected valley structures within which the height derivative is not continuous. We develop a statistical theory for the KPZ equation in (1+1) dimensions driven with a random forcing that is white in time and Gaussian-correlated in space. A master equation is derived for the joint probability density function of height difference and height gradient P(h-h*, partial differential(x)h,t) when the forcing correlation length is much smaller than the system size and much larger than the typical sharp valley width. In the time scales before the creation of the sharp valleys, we find the exact generating function of h-h* and partial differential(x)h. The time scale of the sharp valley formation is expressed in terms of the force characteristics. In the stationary state, when the sharp valleys are fully developed, finite-size corrections to the scaling laws of the structure functions left angle bracket(h-h*)(n)(partial differential(x)h)(m)right angle bracket are also obtained.
NASA Astrophysics Data System (ADS)
Kadum, Hawwa; Ali, Naseem; Cal, Raúl
2016-11-01
Hot-wire anemometry measurements have been performed on a 3 x 3 wind turbine array to study the multifractality of the turbulent kinetic energy dissipations. A multifractal spectrum and Hurst exponents are determined at nine locations downstream of the hub height, and bottom and top tips. Higher multifractality is found at 0.5D and 1D downstream of the bottom tip and hub height. The second order of the Hurst exponent and combination factor show an ability to predict the flow state in terms of its development. Snapshot proper orthogonal decomposition is used to identify the coherent and incoherent structures and to reconstruct the stochastic velocity using a specific number of the POD eigenfunctions. The accumulation of the turbulent kinetic energy in top tip location exhibits fast convergence compared to the bottom tip and hub height locations. The dissipation of the large and small scales are determined using the reconstructed stochastic velocities. The higher multifractality is shown in the dissipation of the large scale compared to small-scale dissipation showing consistency with the behavior of the original signals.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Mukherjee, Swagato; Venugopalan, Raju; Yin, Yi
Exploiting the universality between the QCD critical point and the three-dimensional Ising model, closed form expressions derived for nonequilibrium critical cumulants on the crossover side of the critical point reveal that they can differ in both magnitude and sign from equilibrium expectations. Here, we demonstrate here that key elements of the Kibble-Zurek framework of nonequilibrium phase transitions can be employed to describe the dynamics of these critical cumulants. Lastly, our results suggest that observables sensitive to critical dynamics in heavy-ion collisions should be expressible as universal scaling functions, thereby providing powerful model-independent guidance in searches for the QCD critical point.
Revealing modified gravity signals in matter and halo hierarchical clustering
NASA Astrophysics Data System (ADS)
Hellwing, Wojciech A.; Koyama, Kazuya; Bose, Benjamin; Zhao, Gong-Bo
2017-07-01
We use a set of N-body simulations employing a modified gravity (MG) model with Vainshtein screening to study matter and halo hierarchical clustering. As test-case scenarios we consider two normal branch Dvali-Gabadadze-Porrati (nDGP) gravity models with mild and strong growth rate enhancement. We study higher-order correlation functions ξn(R ) up to n =9 and associated reduced cumulants Sn(R )≡ξn(R )/σ (R )2n -2. We find that the matter probability distribution functions are strongly affected by the fifth force on scales up to 50 h-1 Mpc , and the deviations from general relativity (GR) are maximized at z =0 . For reduced cumulants Sn, we find that at small scales R ≤6 h-1 Mpc the MG is characterized by lower values, with the deviation growing from 7% in the reduced skewness up to even 40% in S5. To study the halo clustering we use a simple abundance matching and divide haloes into thee fixed number density samples. The halo two-point functions are weakly affected, with a relative boost of the order of a few percent appearing only at the smallest pair separations (r ≤5 h-1 Mpc ). In contrast, we find a strong MG signal in Sn(R )'s, which are enhanced compared to GR. The strong model exhibits a >3 σ level signal at various scales for all halo samples and in all cumulants. In this context, we find that the reduced kurtosis to be an especially promising cosmological probe of MG. Even the mild nDGP model leaves a 3 σ imprint at small scales R ≤3 h-1 Mpc , while the stronger model deviates from a GR signature at nearly all scales with a significance of >5 σ . Since the signal is persistent in all halo samples and over a range of scales, we advocate that the reduced kurtosis estimated from galaxy catalogs can potentially constitute a strong MG-model discriminatory as well as GR self-consistency test.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Kushwaha, Upendra; Joshi, Bhuwan; Moon, Yong-Jae
We investigate evolutionary phases of an M6.2 flare and the associated confined eruption of a prominence. The pre-flare phase exhibits spectacular large-scale contraction of overlying extreme ultraviolet (EUV) coronal loops during which the loop system was subjected to an altitude decrease of ∼20 Mm (40% of the initial height) for an extended span of ∼30 minutes. This contraction phase is accompanied by sequential EUV brightenings associated with hard X-ray (HXR; up to 25 keV) and microwave (MW) sources from low-lying loops in the core region which together with X-ray spectra indicate strong localized heating in the source region before themore » filament activation. With the onset of the flare’s impulsive phase, we detect HXR and MW sources that exhibit intricate temporal and spatial evolution in relation to the fast rise of the prominence. Following the flare maximum, the filament eruption slowed down and subsequently became confined within the large overlying active region loops. During the confinement process of the erupting prominence, we detect MW emission from the extended coronal region with multiple emission centroids, which likely represent emission from hot blobs of plasma formed after the collapse of the expanding flux rope and entailing prominence material. RHESSI spectroscopy reveals high plasma temperature (∼30 MK) and substantial non-thermal characteristics (δ ∼ 5) during the impulsive phase of the flare. The time evolution of thermal energy exhibits a good correspondence with the variations in cumulative non-thermal energy, which suggests that the energy of accelerated particles is efficiently converted to hot flare plasma, implying an effective validation of the Neupert effect.« less
Antipsychotic Response Worsens With Postmenopausal Duration in Women With Schizophrenia.
González-Rodríguez, Alexandre; Catalán, Rosa; Penadés, Rafael; Ruiz Cortés, Victoria; Torra, Mercè; Seeman, Mary V; Bernardo, Miquel
2016-12-01
The loss of estrogens in the menopause may lead to increased vulnerability for psychotic relapse, poor clinical outcome, and a need for increased antipsychotic dose. However, confounders such as cumulative estrogen exposure and time since menopause have been inadequately studied. Our aim was to investigate potential variables capable of influencing antipsychotic response in a sample of postmenopausal women with schizophrenia. Sixty-four postmenopausal schizophrenic women were followed in a 12-week prospective treatment-by-clinical requirement study. Duration of reproductive years was considered an indirect measure of lifetime cumulative estrogens exposure. Psychopathological assessment included the following: Positive and Negative Syndrome Scale, Personal and Social Performance, and Clinical Global Impression-Schizophrenia Scale. Response was defined as a reduction of 30% or more of Positive and Negative Syndrome Scale total scores. Antipsychotic adherence was assessed by plasma level monitoring at 4 weeks. Regression analyses were performed to investigate the association between potential confounding factors and antipsychotic response. Forty-two participants (66%) were found to be antipsychotic responders. Time since menopause was significantly and negatively associated with overall antipsychotic response, explaining almost 42% of the variance of the model used. Smoking and cumulative estrogen exposures were associated with improvement in negative symptoms. Smoking and time since menopause were associated with improvement in excitement symptoms, and smoking was positively associated with improvement in depressive and cognitive symptoms. Time since menopause was significantly negatively associated with antipsychotic response in postmenopausal schizophrenic women, suggesting a decline in antipsychotic response after menopause. The neurobiological basis for antipsychotic response may include a role for estrogen and nicotine receptors.
Suglia, Shakira Franco; Staudenmayer, John; Cohen, Sheldon; Enlow, Michelle Bosquet; Rich-Edwards, Janet W; Wright, Rosalind J
2010-12-01
While adult hypothalamic-pituitary-adrenocortical (HPA) axis functioning is thought to be altered by traumatic experiences, little data exist on the effects of cumulative stress on HPA functioning among pregnant women or among specific racial and ethnic groups. Individuals may be increasingly vulnerable to physiological alterations when experiencing cumulative effects of multiple stressors. These effects may be particularly relevant in urban poor communities where exposure to multiple stressors is more prevalent. The goal of this study was to explore the effects of multiple social stressors on HPA axis functioning in a sample of urban Black (n = 68) and Hispanic (n = 132) pregnant women enrolled in the Asthma Coalition on Community, Environment, and Social Stress (ACCESS). Pregnant women were administered the Revised Conflict Tactics Scale (R-CTS) survey to assess interpersonal violence, the Experiences of Discrimination (EOD) survey, the Crisis in Family Systems-Revised (CRISYS-R) negative life events survey, and the My Exposure to Violence (ETV) survey, which ascertains exposure to community violence. A cumulative stress measure was derived from these instruments. Salivary cortisol samples were collected five times per day over three days to assess area under the curve (AUC), morning change, and basal awakening response in order to characterize diurnal salivary cortisol patterns. Repeated measures mixed models, stratified by race/ethnicity, were performed adjusting for education level, age, smoking status, body mass index and weeks pregnant at time of cortisol sampling. The majority of Hispanic participants (57%) had low cumulative stress exposure, while the majority of Black participants had intermediate (35%) or high (41%) cumulative stress exposure. Results showed that among Black but not Hispanic women, cumulative stress was associated with lower morning cortisol levels, including a flatter waking to bedtime rhythm. These analyses suggest that the combined effects of cumulative stressful experiences are associated with disrupted HPA functioning among pregnant women. While the etiology of racial/ethnic differences in stress-induced HPA alterations is not clear, this warrants further research.
NASA Astrophysics Data System (ADS)
Bedard, J. H. J.; Zagorevski, A.; Corriveau, A. S.
2016-12-01
The Cache creek terrane extends from southern B.C. to the Yukon. It accreted to North America at 175Ma and is composed of Paleozoic seamounts, Mesozoic oceanic arcs and mantle rocks. Mantle harzburgite massifs represent intra-oceanic core-complexes. Mantle rocks are cut by gabbroic dykes and overlain by chert, lava, dismembered hypabyssal complexes and rare cumulates. At King Mountain, gabbronorites are in tectonic contact with subjacent peridotite. Other crustal relics exposed nearby include sheeted hypabyssal intrusions and volcanics that range from depleted arc tholeiites to boninites. The King Mountain cumulates are rhythmically layered, foliated gabbronorites with 5% oxides and minor interstitial hornblende that yields temperatures of 652-759oC. Cumulates may show evidence of compaction-related flattening and intra-cumulate shear (boudins, fold noses). A 300m thick continuous section records two fractional crystallization cycles, whole rock mg# varying from 60 to 35 in the 1st cycle and from 52 to 30 in the 2nd. Cumulates formed during passage of evolved multiply-saturated magmas derived from a deeper chamber towards the surface. Inverse trace element models show that the gabbronorite cumulates are compositionally akin to boninites. The lowest-mg# rocks in the differentiation cycles are rusty 10cm-1m interbeds with abundant magnetite+ ilmenite ( 10-15%), high sulphide contents ( 5-10%, pyrrhotite and chalcopyrite) and high V contents (<1200ppm). These are interpreted to record episodic co-accumulation of Fe-Ti-oxides, with the decrease in melt FeO-content triggering sulphide immiscibility. Hornblendite and hornblende tonalite veins are locally transposed into the layered cumulates, forming flaser gabbros with 5-50% cm-scale lensoid hornblendite that impregnates and replaces the foliated gabbro-norite; greatly increasing REE contents. Amphibole oikocrysts show evidence of internal deformation and record temperatures of 753-804 oC.
NASA Astrophysics Data System (ADS)
Köhler, P.; Huth, A.
2010-05-01
The canopy height of forests is a key variable which can be obtained using air- or spaceborne remote sensing techniques such as radar interferometry or lidar. If new allometric relationships between canopy height and the biomass stored in the vegetation can be established this would offer the possibility for a global monitoring of the above-ground carbon content on land. In the absence of adequate field data we use simulation results of a tropical rain forest growth model to propose what degree of information might be generated from canopy height and thus to enable ground-truthing of potential future satellite observations. We here analyse the correlation between canopy height in a tropical rain forest with other structural characteristics, such as above-ground biomass (AGB) (and thus carbon content of vegetation) and leaf area index (LAI). The process-based forest growth model FORMIND2.0 was applied to simulate (a) undisturbed forest growth and (b) a wide range of possible disturbance regimes typically for local tree logging conditions for a tropical rain forest site on Borneo (Sabah, Malaysia) in South-East Asia. It is found that for undisturbed forest and a variety of disturbed forests situations AGB can be expressed as a power-law function of canopy height h (AGB=a·hb) with an r2~60% for a spatial resolution of 20 m×20 m (0.04 ha, also called plot size). The regression is becoming significant better for the hectare wide analysis of the disturbed forest sites (r2=91%). There seems to exist no functional dependency between LAI and canopy height, but there is also a linear correlation (r2~60%) between AGB and the area fraction in which the canopy is highly disturbed. A reasonable agreement of our results with observations is obtained from a comparison of the simulations with permanent sampling plot data from the same region and with the large-scale forest inventory in Lambir. We conclude that the spaceborne remote sensing techniques have the potential to quantify the carbon contained in the vegetation, although this calculation contains due to the heterogeneity of the forest landscape structural uncertainties which restrict future applications to spatial averages of about one hectare in size. The uncertainties in AGB for a given canopy height are here 20-40% (95% confidence level) corresponding to a standard deviation of less than ±10%. This uncertainty on the 1 ha-scale is much smaller than in the analysis of 0.04 ha-scale data. At this small scale (0.04 ha) AGB can only be calculated out of canopy height with an uncertainty which is at least of the magnitude of the signal itself due to the natural spatial heterogeneity of these forests.
Spatial and temporal changes in cumulative human impacts on the world's ocean.
Halpern, Benjamin S; Frazier, Melanie; Potapenko, John; Casey, Kenneth S; Koenig, Kellee; Longo, Catherine; Lowndes, Julia Stewart; Rockwood, R Cotton; Selig, Elizabeth R; Selkoe, Kimberly A; Walbridge, Shaun
2015-07-14
Human pressures on the ocean are thought to be increasing globally, yet we know little about their patterns of cumulative change, which pressures are most responsible for change, and which places are experiencing the greatest increases. Managers and policymakers require such information to make strategic decisions and monitor progress towards management objectives. Here we calculate and map recent change over 5 years in cumulative impacts to marine ecosystems globally from fishing, climate change, and ocean- and land-based stressors. Nearly 66% of the ocean and 77% of national jurisdictions show increased human impact, driven mostly by climate change pressures. Five percent of the ocean is heavily impacted with increasing pressures, requiring management attention. Ten percent has very low impact with decreasing pressures. Our results provide large-scale guidance about where to prioritize management efforts and affirm the importance of addressing climate change to maintain and improve the condition of marine ecosystems.
Spatial and temporal changes in cumulative human impacts on the world's ocean
Halpern, Benjamin S.; Frazier, Melanie; Potapenko, John; Casey, Kenneth S.; Koenig, Kellee; Longo, Catherine; Lowndes, Julia Stewart; Rockwood, R. Cotton; Selig, Elizabeth R.; Selkoe, Kimberly A.; Walbridge, Shaun
2015-01-01
Human pressures on the ocean are thought to be increasing globally, yet we know little about their patterns of cumulative change, which pressures are most responsible for change, and which places are experiencing the greatest increases. Managers and policymakers require such information to make strategic decisions and monitor progress towards management objectives. Here we calculate and map recent change over 5 years in cumulative impacts to marine ecosystems globally from fishing, climate change, and ocean- and land-based stressors. Nearly 66% of the ocean and 77% of national jurisdictions show increased human impact, driven mostly by climate change pressures. Five percent of the ocean is heavily impacted with increasing pressures, requiring management attention. Ten percent has very low impact with decreasing pressures. Our results provide large-scale guidance about where to prioritize management efforts and affirm the importance of addressing climate change to maintain and improve the condition of marine ecosystems. PMID:26172980
NASA Technical Reports Server (NTRS)
Kahn, R.; Goody, R.; Pollack, J.
1981-01-01
The changing sky brightness during the Martian twilight as measured by the Viking lander cameras is shown to be consistent with data obtained from sky brightness measurements. An exponential distribution of dust with a scale height of 10 km, equal to the atmospheric scale height, is consistent with the shape of the light curve. Multiple scattering resulting from the forward scattering peak of large particles makes a major contribution to the intensity of the twilight. The spectral distribution of light in the twilight sky may require slightly different optical properties for the scattering particles at high levels from those of the aerosol at lower levels.
NASA Astrophysics Data System (ADS)
Treuhaft, R. N.; Baccini, A.; Goncalves, F. G.; Lei, Y.; Keller, M.; Walker, W. S.
2017-12-01
Tropical forests account for about 50% of the world's forested biomass, and play a critical role in the control of atmospheric carbon dioxide. Large-scale (1000's of km) changes in forest structure and biomass bear on global carbon source-sink dynamics, while small-scale (< 100 m) changes bear on deforestation and degradation monitoring. After describing the interferometric SAR (InSAR) phase-height observation, we show forest phase-height time series from the TanDEM-X radar interferometer at X-band (3 cm), taken with monthly and sub-hectare temporal and spatial resolution, respectively. The measurements were taken with more than 30 TanDEM-X passes over Tapajós National Forest in the Brazilian Amazon between 2011 and 2014. The transformation of phase-height rates into aboveground biomass (AGB) rates is based on the idea that the change in AGB due to a change in phase-height depends on the plot's AGB. Plots with higher AGB will produce more AGB for a given increase in height or phase-height. Postulating a power-law dependence of plot-level mass density on physical height, we previously found that the best conversion factors for transforming phase-height rate to AGB rate were indeed dependent on AGB. For 78 plots, we demonstrated AGB rates from InSAR phase-height rates using AGB from field measurements. For regional modeling of the Amazon Basin, field measurements of AGB, to specify the conversion factors, is impractical. Conversion factors from InSAR phase-height rate to AGB rate in this talk will be based on AGB derived from the Moderate Resolution Imaging Spectroradiometer (MODIS). AGB measurement from MODIS is based on the spectral reflectance of 7 bands from the visible to short wave infrared, and auxiliary metrics describing the variance in reflectance. The mapping of MODIS reflectance to AGB is enabled by training a machine learning algorithm with lidar-derived AGB data, which are in turn trained by field measurements for small areas. The performance of TanDEM-X AGB rate from MODIS-derived conversion factors will be compared to that derived from field-based conversion factors. We will also attempt to improve phase-height rate to AGB rate transformation by deriving improved models of mass density dependences on height, based on the aggregation of single-stem allometrics.
THE SPATIAL STRUCTURE OF MONO-ABUNDANCE SUB-POPULATIONS OF THE MILKY WAY DISK
DOE Office of Scientific and Technical Information (OSTI.GOV)
Bovy, Jo; Rix, Hans-Walter; Liu Chao
2012-07-10
The spatial, kinematic, and elemental-abundance structure of the Milky Way's stellar disk is complex, and has been difficult to dissect with local spectroscopic or global photometric data. Here, we develop and apply a rigorous density modeling approach for Galactic spectroscopic surveys that enables investigation of the global spatial structure of stellar sub-populations in narrow bins of [{alpha}/Fe] and [Fe/H], using 23,767 G-type dwarfs from SDSS/SEGUE, which effectively sample 5 kpc < R{sub GC} < 12 kpc and 0.3 kpc {approx}< |Z| {approx}< 3 kpc. We fit models for the number density of each such ([{alpha}/Fe] and [Fe/H]) mono-abundance component, properlymore » accounting for the complex spectroscopic SEGUE sampling of the underlying stellar population, as well as for the metallicity and color distributions of the samples. We find that each mono-abundance sub-population has a simple spatial structure that can be described by a single exponential in both the vertical and radial directions, with continuously increasing scale heights ( Almost-Equal-To 200 pc to 1 kpc) and decreasing scale lengths (>4.5 kpc to 2 kpc) for increasingly older sub-populations, as indicated by their lower metallicities and [{alpha}/Fe] enhancements. That the abundance-selected sub-components with the largest scale heights have the shortest scale lengths is in sharp contrast with purely geometric 'thick-thin disk' decompositions. To the extent that [{alpha}/Fe] is an adequate proxy for age, our results directly show that older disk sub-populations are more centrally concentrated, which implies inside-out formation of galactic disks. The fact that the largest scale-height sub-components are most centrally concentrated in the Milky Way is an almost inevitable consequence of explaining the vertical structure of the disk through internal evolution. Whether the simple spatial structure of the mono-abundance sub-components and the striking correlations between age, scale length, and scale height can be plausibly explained by satellite accretion or other external heating remains to be seen.« less
Tsai, Song-Yen; Chou, Hung-Yi; The, Hee-Wen; Chen, Chao-Meei; Chen, Chien-Jen
2003-08-01
This cross-sectional study examined the possible influence on the development of cognitive function among adolescents due to long-term arsenic exposure. Forty-nine junior school students drinking arsenic-containing well water and 60 controls matched with age, sex, education, body height, body weight, body mass index, and socioeconomic status were compared. The former was divided into two groups: high and low exposure, with mean cumulative arsenic levels of 520629.0+/-605824.2 and 13782.2+/-12886.0 ppm, respectively. Four neurobehavioral tests including continuous performance test (CPT), symbol digit (SD), pattern memory (PM) and switching attention (SA) were applied. A strong correlation between age and education caused collinearity in the multiple regression model (r=0.84, P<0.0001). Only education and sex, excluding age, were entered into the model as covariates. Pattern memory and switching attention were significantly affected by long-term cumulative exposure to arsenic after adjusting for education and sex. It is suggested that the arsenic levels in the well water may be monitored extensively, but if there is no intervention, then neurobehavioral function will not be protected. Limitations of the current study require replication of this effect in other studies to confirm this conclusion.
The influence of sugarcane crop development on rainfall interception losses
NASA Astrophysics Data System (ADS)
Fernandes, Rafael Pires; Silva, Robson Willians da Costa; Salemi, Luiz Felippe; Andrade, Tatiana Morgan Berteli de; Moraes, Jorge Marcos de; Dijk, Albert I. J. M. Van; Martinelli, Luiz Antonio
2017-08-01
The expansion of sugarcane plantations in Brazil has raised concerns regarding its hydrological impacts. One of these impacts is related to rainfall interception, which can be expected to vary in response to substantial changes in canopy structure throughout the cropping cycle. We collected field measurements to determine interception losses and interpreted the observations using an adapted Gash model during different stages of a sugarcane ratoon cropping cycle. Cumulative gross rainfall (PG), throughfall (TF) and stemflow (SF) were measured biweekly, along with vegetation structure measurements of leaf area index (LAI) and plant height. For the first 300 days after the first harvest, the cumulative PG of 1095 mm was partitioned into 635 mm TF (58%) and 263 mm SF (24%). The inferred interception loss (IL) was 263 mm (24%). There was a gradual and clear increase in IL from 3% to 46% while partitioning between TF and SF also changed during ratoon regrowth. After model parameter optimisation, observed IL was simulated satisfactorily. Model estimates suggested that evaporation from the saturated canopy is the main IL pathway, followed by evaporation after storms. Plant architecture, LAI and meteorological conditions during the cropping cycle appeared the main factors determining IL.
NASA Astrophysics Data System (ADS)
Pellissier, Loïc; Wisz, Mary S.; Strandberg, Beate; Damgaard, Christian
2014-01-01
Throughout the world, herbicides and fertilizers change species composition in agricultural communities, but how do the cumulative effects of these chemicals impact the functional and phylogenetic structure of non-targeted communities when they drift into adjacent semi-natural habitats? Based on long-term experiment we show that fertilizer and herbicides (glyphosate) have contrasting effects on functional structure, but can increase phylogenetic diversity in semi-natural plant communities. We found that an increase in nitrogen promoted an increase in the average specific leaf area and canopy height at the community level, but an increase in glyphosate promoted a decrease in those traits. Phylogenetic diversity of plant communities increased when herbicide and fertilizer were applied together, likely because functional traits facilitating plant success in those conditions were not phylogenetically conserved. Species richness also decreased with increasing levels of nitrogen and glyphosate. Our results suggest that predicting the cumulative effects of agrochemicals is more complex than anticipated due to their distinct selection of traits that may or may not be conserved phylogenetically. Precautionary efforts to mitigate drift of agricultural chemicals into semi-natural habitats are warranted to prevent unforeseeable biodiversity shifts.
Parkinson, R J; Bezaire, M; Callaghan, J P
2011-07-01
This study examined errors introduced by a posture matching approach (3DMatch) relative to dynamic three-dimensional rigid link and EMG-assisted models. Eighty-eight lifting trials of various combinations of heights (floor, 0.67, 1.2 m), asymmetry (left, right and center) and mass (7.6 and 9.7 kg) were videotaped while spine postures, ground reaction forces, segment orientations and muscle activations were documented and used to estimate joint moments and forces (L5/S1). Posture matching over predicted peak and cumulative extension moment (p < 0.0001 for all variables). There was no difference between peak compression estimates obtained with posture matching or EMG-assisted approaches (p = 0.7987). Posture matching over predicted cumulative (p < 0.0001) compressive loading due to a bias in standing, however, individualized bias correction eliminated the differences. Therefore, posture matching provides a method to analyze industrial lifting exposures that will predict kinetic values similar to those of more sophisticated models, provided necessary corrections are applied. Copyright © 2010 Elsevier Ltd and The Ergonomics Society. All rights reserved.
Automated Passive Capillary Lysimeters for Estimating Water Drainage in the Vadose Zone
NASA Astrophysics Data System (ADS)
Jabro, J.; Evans, R.
2009-04-01
In this study, we demonstrated and evaluated the performance and accuracy of an automated PCAP lysimeters that we designed for in-situ continuous measuring and estimating of drainage water below the rootzone of a sugarbeet-potato-barley rotation under two irrigation frequencies. Twelve automated PCAPs with sampling surface dimensions of 31 cm width * 91 cm long and 87 cm in height were placed 90 cm below the soil surface in a Lihen sandy loam. Our state-of-the-art design incorporated Bluetooth wireless technology to enable an automated datalogger to transmit drainage water data simultaneously every 15 minutes to a remote host and had a greater efficiency than other types of lysimeters. It also offered a significantly larger coverage area (2700 cm2) than similarly designed vadose zone lysimeters. The cumulative manually extracted drainage water was compared with the cumulative volume of drainage water recorded by the datalogger from the tipping bucket using several statistical methods. Our results indicated that our automated PCAPs are accurate and provided convenient means for estimating water drainage in the vadose zone without the need for costly and manually time-consuming supportive systems.
Effect of block weight on work demands and physical workload during masonry work.
Van Der Molen, H F; Kuijer, P P F M; Hopmans, P P W; Houweling, A G; Faber, G S; Hoozemans, M J M; Frings-Dresen, M H W
2008-03-01
The effect of block weight on work demands and physical workload was determined for masons who laid sandstone building blocks over the course of a full work day. Three groups of five sandstone block masons participated. Each group worked with a different block weight: 11 kg, 14 kg or 16 kg. Productivity and durations of tasks and activities were assessed through real time observations at the work site. Energetic workload was also assessed through monitoring the heart rate and oxygen consumption at the work site. Spinal load of the low back was estimated by calculating the cumulated elastic energy stored in the lumbar spine using durations of activities and previous data on corresponding compression forces. Block weight had no effect on productivity, duration or frequency of tasks and activities, energetic workload or cumulative spinal load. Working with any of the block weights exceeded exposure guidelines for work demands and physical workload. This implies that, regardless of block weight in the range of 11 to 16 kg, mechanical lifting equipment or devices to adjust work height should be implemented to substantially lower the risk of low back injuries.
NASA Astrophysics Data System (ADS)
Xie, Beibei; Kong, Lingfu; Kong, Deming; Kong, Weihang; Li, Lei; Liu, Xingbin; Chen, Jiliang
2017-11-01
In order to accurately measure the flow rate under the low yield horizontal well conditions, an auto-cumulative flowmeter (ACF) was proposed. Using the proposed flowmeter, the oil flow rate in horizontal oil-water two-phase segregated flow can be finely extracted. The computational fluid dynamics software Fluent was used to simulate the fluid of the ACF in oil-water two-phase flow. In order to calibrate the simulation measurement of the ACF, a novel oil flow rate measurement method was further proposed. The models of the ACF were simulated to obtain and calibrate the oil flow rate under different total flow rates and oil cuts. Using the finite-element method, the structure of the seven conductance probes in the ACF was simulated. The response values for the probes of the ACF under the conditions of oil-water segregated flow were obtained. The experiments for oil-water segregated flow under different heights of the oil accumulation in horizontal oil-water two-phase flow were carried out to calibrate the ACF. The validity of the oil flow rate measurement in horizontal oil-water two-phase flow was verified by simulation and experimental results.
Xie, Beibei; Kong, Lingfu; Kong, Deming; Kong, Weihang; Li, Lei; Liu, Xingbin; Chen, Jiliang
2017-11-01
In order to accurately measure the flow rate under the low yield horizontal well conditions, an auto-cumulative flowmeter (ACF) was proposed. Using the proposed flowmeter, the oil flow rate in horizontal oil-water two-phase segregated flow can be finely extracted. The computational fluid dynamics software Fluent was used to simulate the fluid of the ACF in oil-water two-phase flow. In order to calibrate the simulation measurement of the ACF, a novel oil flow rate measurement method was further proposed. The models of the ACF were simulated to obtain and calibrate the oil flow rate under different total flow rates and oil cuts. Using the finite-element method, the structure of the seven conductance probes in the ACF was simulated. The response values for the probes of the ACF under the conditions of oil-water segregated flow were obtained. The experiments for oil-water segregated flow under different heights of the oil accumulation in horizontal oil-water two-phase flow were carried out to calibrate the ACF. The validity of the oil flow rate measurement in horizontal oil-water two-phase flow was verified by simulation and experimental results.
Zhang, Zhongrui; Zhong, Quanlin; Niklas, Karl J; Cai, Liang; Yang, Yusheng; Cheng, Dongliang
2016-08-24
Metabolic scaling theory (MST) posits that the scaling exponents among plant height H, diameter D, and biomass M will covary across phyletically diverse species. However, the relationships between scaling exponents and normalization constants remain unclear. Therefore, we developed a predictive model for the covariation of H, D, and stem volume V scaling relationships and used data from Chinese fir (Cunninghamia lanceolata) in Jiangxi province, China to test it. As predicted by the model and supported by the data, normalization constants are positively correlated with their associated scaling exponents for D vs. V and H vs. V, whereas normalization constants are negatively correlated with the scaling exponents of H vs. D. The prediction model also yielded reliable estimations of V (mean absolute percentage error = 10.5 ± 0.32 SE across 12 model calibrated sites). These results (1) support a totally new covariation scaling model, (2) indicate that differences in stem volume scaling relationships at the intra-specific level are driven by anatomical or ecophysiological responses to site quality and/or management practices, and (3) provide an accurate non-destructive method for predicting Chinese fir stem volume.
Porter, William; Gallagher, Sean; Torma-Krajewski, Janet
2010-05-01
Hand scaling is a physically demanding task responsible for numerous overexertion injuries in underground mining. Scaling requires the miner to use a long pry bar to remove loose rock, reducing the likelihood of rock fall injuries. The experiments described in this article simulated "rib" scaling (scaling a mine wall) from an elevated bucket to examine force generation and electromyographic responses using two types of scaling bars (steel and fiberglass-reinforced aluminum) at five target heights ranging from floor level to 176 cm. Ten male and six female subjects were tested in separate experiments. Peak and average force applied at the scaling bar tip and normalized electromyography (EMG) of the left and right pairs of the deltoid and erectores spinae muscles were obtained. Work height significantly affected peak prying force during scaling activities with highest force capacity at the lower levels. Bar type did not affect force generation. However, use of the lighter fiberglass bar required significantly more muscle activity to achieve the same force. Results of these studies suggest that miners scale points on the rock face that are below their knees, and reposition the bucket as often as necessary to do so. Published by Elsevier Ltd.
Federal Register 2010, 2011, 2012, 2013, 2014
2012-08-02
... nacelle and rotor blades in a wind turbine with a minimum rated electrical power generation capacity in... efficiencies have been improving, and turbine heights have been rising to altitudes with much stronger winds... configurations that meet the minimum height requirement and are designed to support wind turbine electrical...
Height-diameter allometry of tropical forest trees
T.R. Feldpausch; L. Banin; O.L. Phillips; T.R. Baker; S.L. Lewis; C.A. Quesada; K. Affum-Baffoe; E.J.M.M. Arets; N.J. Berry; M. Bird; E.S. Brondizio; P de Camargo; J. Chave; G. Djagbletey; T.F. Domingues; M. Drescher; P.M. Fearnside; M.B. Franca; N.M. Fyllas; G. Lopez-Gonzalez; A. Hladik; N. Higuchi; M.O. Hunter; Y. Iida; K.A. Salim; A.R. Kassim; M. Keller; J. Kemp; D.A. King; J.C. Lovett; B.S. Marimon; B.H. Marimon-Junior; E. Lenza; A.R. Marshall; D.J. Metcalfe; E.T.A. Mitchard; E.F. Moran; B.W. Nelson; R. Nilus; E.M. Nogueira; M. Palace; S. Patiño; K.S.-H. Peh; M.T. Raventos; J.M. Reitsma; G. Saiz; F. Schrodt; B. Sonke; H.E. Taedoumg; S. Tan; L. White; H. Woll; J. Lloyd
2011-01-01
Tropical tree height-diameter (H:D) relationships may vary by forest type and region making large-scale estimates of above-ground biomass subject to bias if they ignore these differences in stem allometry. We have therefore developed a new global tropical forest database consisting of 39 955 concurrent H and D measurements encompassing 283 sites in 22 tropical...
NASA Astrophysics Data System (ADS)
Selkoe, K. A.; Halpern, B. S.; Ebert, C. M.; Franklin, E. C.; Selig, E. R.; Casey, K. S.; Bruno, J.; Toonen, R. J.
2009-09-01
Effective and comprehensive regional-scale marine conservation requires fine-grained data on the spatial patterns of threats and their overlap. To address this need for the Papahānaumokuākea Marine National Monument (Monument) in Hawaii, USA, spatial data on 14 recent anthropogenic threats specific to this region were gathered or created, including alien species, bottom fishing, lobster trap fishing, ship-based pollution, ship strike risks, marine debris, research diving, research equipment installation, research wildlife sacrifice, and several anthropogenic climate change threats i.e., increase in ultraviolet (UV) radiation, seawater acidification, the number of warm ocean temperature anomalies relevant to disease outbreaks and coral bleaching, and sea level rise. These data were combined with habitat maps and expert judgment on the vulnerability of different habitat types in the Monument to estimate spatial patterns of current cumulative impact at 1 ha (0.01 km2) resolution. Cumulative impact was greatest for shallow reef areas and peaked at Maro Reef, where 13 of the 14 threats overlapped in places. Ocean temperature variation associated with disease outbreaks was found to have the highest predicted impact overall, followed closely by other climate-related threats, none of which have easily tractable management solutions at the regional scale. High impact threats most tractable to regional management relate to ship traffic. Sensitivity analyses show that the results are robust to both data availability and quality. Managers can use these maps to (1) inform management and surveillance priorities based on the ranking of threats and their distributions, (2) guide permitting decisions based on cumulative impacts, and (3) choose areas to monitor for climate change effects. Furthermore, this regional analysis can serve as a case study for managers elsewhere interested in assessing and mapping region-specific cumulative human impacts.
Beguin, Julien; McIntire, Eliot J B; Raulier, Frédéric
2015-11-01
Protected area networks are the dominant conservation approach that is used worldwide for protecting biodiversity. Conservation planning in managed forests, however, presents challenges when endangered species use old-growth forests targeted by the forest industry for timber supply. In many ecosystems, this challenge is further complicated by the occurrence of natural disturbance events that disrupt forest attributes at multiple scales. Using spatially explicit landscape simulation experiments, we gather insights into how these large scale, multifaceted processes (fire risk, timber harvesting and the amount of protected area) influenced both the persistence of the threatened boreal caribou and the level of timber supply in the boreal forest of eastern Canada. Our result showed that failure to account explicitly and a priori for fire risk in the calculation of timber supply led to an overestimation of timber harvest volume, which in turn led to rates of cumulative disturbances that threatened both the long-term persistence of boreal caribou and the sustainability of the timber supply itself. Salvage logging, however, allowed some compensatory cumulative effects. It minimised the reductions of timber supply within a range of ∼10% while reducing the negative impact of cumulative disturbances caused by fire and logging on caribou. With the global increase of the human footprint on forest ecosystems, our approach and results provide useful tools and insights for managers to resolve what often appear as lose-lose situation between the persistence of species at risk and timber harvest in other forest ecosystems. These tools contribute to bridge the gap between conservation and forest management, two disciplines that remain too often disconnected in practice. Copyright © 2015 Elsevier Ltd. All rights reserved.
Mammal responses to the human footprint vary across species and stressors.
Toews, Mary; Juanes, Francis; Burton, A Cole
2018-07-01
A rapidly expanding human footprint - comprised of anthropogenic land-use change and infrastructure - is profoundly affecting wildlife distributions worldwide. Cumulative effects management (CEM) is a regional approach that seeks to manage combined effects of the human footprint on biodiversity across large spatial scales. Challenges to implementing this approach include a lack of ecological data at large spatial scales, the high cost of monitoring multiple indicators, and the need to manage multiple footprints across industries. To inform development of effective CEM, we used large mammals as indicators to address the following questions: a) do species respond more strongly to individual footprint features or to cumulative effects (combined area of all footprint types, measured as total footprint), b) which features elicit the strongest responses across species, and c) are the direction of responses to footprint consistent? We used data from 12 years of snowtrack surveys (2001-2013) in the boreal forest of Alberta, coupled with regional footprint and landcover data, to develop generalized linear mixed-effects models relating the relative abundance of five boreal mammals [gray wolf (Canis lupus), Canada lynx (Lynx canadensis), coyote (Canis latrans), white-tailed deer (Odocoileus virginianus) and moose (Alces alces)] to individual and cumulative effects of the human footprint. We found that across species the strongest responses were to agriculture, roads, and young cutblocks (<10 years), suggesting these as potential priority stressors to address within CEM. Most species also responded to total footprint, indicating that in the absence of detailed information on individual features, this coarse measure can serve as an index of cumulative effects. There was high variability in direction and magnitude of responses across species, indicating that community-level responses are likely and should be considered within CEM planning. Copyright © 2018 Elsevier Ltd. All rights reserved.
The Response of African Land Surface Phenology to Large Scale Climate Oscillations
NASA Technical Reports Server (NTRS)
Brown, Molly E.; de Beurs, Kirsten; Vrieling, Anton
2010-01-01
Variations in agricultural production due to rainfall and temperature fluctuations are a primary cause of food insecurity on the African continent. Analysis of changes in phenology can provide quantitative information on the effect of climate variability on growing seasons in agricultural regions. Using a robust statistical methodology, we describe the relationship between phenology metrics derived from the 26 year AVHRR NDVI record and the North Atlantic Oscillation index (NAO), the Indian Ocean Dipole (IOD), the Pacific Decadal Oscillation (PDO), and the Multivariate ENSO Index (MEI). We map the most significant positive and negative correlation for the four climate indices in Eastern, Western and Southern Africa between two phenological metrics and the climate indices. Our objective is to provide evidence of whether climate variability captured in the four indices has had a significant impact on the vegetative productivity of Africa during the past quarter century. We found that the start of season and cumulative NDVI were significantly affected by large scale variations in climate. The particular climate index and the timing showing highest correlation depended heavily on the region examined. In Western Africa the cumulative NDVI correlates with PDO in September-November. In Eastern Africa the start of the June-October season strongly correlates with PDO in March-May, while the PDO in December-February correlates with the start of the February-June season. The cumulative NDVI over this last season relates to the MEI of March-May. For Southern Africa, high correlations exist between SOS and NAO of September-November, and cumulative NDVI and MEI of March-May. The research shows that climate indices can be used to anticipate late start and variable vigor in the growing season of sensitive agricultural regions in Africa.
Irregular topography at the Earth’s inner core boundary
Dai, Zhiyang; Wang, Wei; Wen, Lianxing
2012-01-01
Compressional seismic wave reflected off the Earth’s inner core boundary (ICB) from earthquakes occurring in the Banda Sea and recorded at the Hi-net stations in Japan exhibits significant variations in travel time (from -2 to 2.5 s) and amplitude (with a factor of more than 4) across the seismic array. Such variations indicate that Earth’s ICB is irregular, with a combination of at least two scales of topography: a height variation of 14 km changing within a lateral distance of no more than 6 km, and a height variation of 4–8 km with a lateral length scale of 2–4 km. The characteristics of the ICB topography indicate that small-scale variations of temperature and/or core composition exist near the ICB, and/or the ICB topographic surface is being deformed by small-scale forces out of its thermocompositional equilibrium position and is metastable. PMID:22547788
Ground-Handling Forces on a 1/40-scale Model of the U. S. Airship "Akron."
NASA Technical Reports Server (NTRS)
Silverstein, Abe; Gulick, B G
1937-01-01
This report presents the results of full-scale wind tunnel tests conducted to determine the ground-handling forces on a 1/40-scale model of the U. S. Airship "Akron." Ground-handling conditions were simulated by establishing a velocity gradient above a special ground board in the tunnel comparable with that encountered over a landing field. The tests were conducted at Reynolds numbers ranging from 5,000,000 to 19,000,000 at each of six angles of yaw between 0 degree and 180 degrees and at four heights of the model above the ground board. The ground-handling forces vary greatly with the angle of yaw and reach large values at appreciable angles of yaw. Small changes in height, pitch, or roll did not critically affect the forces on the model. In the range of Reynolds numbers tested, no significant variation of the forces with the scale was disclosed.
Irregular topography at the Earth's inner core boundary.
Dai, Zhiyang; Wang, Wei; Wen, Lianxing
2012-05-15
Compressional seismic wave reflected off the Earth's inner core boundary (ICB) from earthquakes occurring in the Banda Sea and recorded at the Hi-net stations in Japan exhibits significant variations in travel time (from -2 to 2.5 s) and amplitude (with a factor of more than 4) across the seismic array. Such variations indicate that Earth's ICB is irregular, with a combination of at least two scales of topography: a height variation of 14 km changing within a lateral distance of no more than 6 km, and a height variation of 4-8 km with a lateral length scale of 2-4 km. The characteristics of the ICB topography indicate that small-scale variations of temperature and/or core composition exist near the ICB, and/or the ICB topographic surface is being deformed by small-scale forces out of its thermocompositional equilibrium position and is metastable.
Assessing cumulative impacts within state environmental review frameworks in the United States
DOE Office of Scientific and Technical Information (OSTI.GOV)
Ma Zhao, E-mail: zma@nrc.umass.ed; Becker, Dennis R., E-mail: drbecker@umn.ed; Kilgore, Michael A., E-mail: mkilgore@umn.ed
Cumulative impact assessment (CIA) is the process of systematically assessing a proposed action's cumulative environmental effects in the context of past, present, and future actions, regardless of who undertakes such actions. Previous studies have examined CIA efforts at the federal level but little is known about how states assess the cumulative impacts of nonfederal projects. By examining state environmental review statutes, administrative rules, agency-prepared materials, and a national survey of the administrators of state environmental review programs, this study identifies the legal and administrative frameworks for CIA. It examines current CIA practice, discusses the relationship between CIA policy and itsmore » implementation, and explores the opportunities for improvement. The results of the study show that twenty-nine state environmental review programs across twenty-six states required the assessment of cumulative environmental impacts. More than half of these programs have adopted specific procedures for implementing their policies. Some programs assessed cumulative impacts using a standard review document, and others have created their own documentations incorporated into applications for state permits or funding. The majority of programs have adopted various scales, baselines, significance criteria, and coordination practices in their CIA processes. Mixed methods were generally used for data collection and analysis; qualitative methods were more prevalent than quantitative methods. The results also suggest that a program with comprehensive and consistent environmental review policies and procedures does not always imply extensive CIA requirements and practices. Finally, this study discusses the potential for improving existing CIA processes and promoting CIA efforts in states without established environmental review programs.« less
Nanoscale Roughness of Natural Fault Surfaces Controlled by Scale-Dependent Yield Strength
NASA Astrophysics Data System (ADS)
Thom, C. A.; Brodsky, E. E.; Carpick, R. W.; Pharr, G. M.; Oliver, W. C.; Goldsby, D. L.
2017-09-01
Many natural fault surfaces exhibit remarkably similar scale-dependent roughness, which may reflect the scale-dependent yield strength of rocks. Using atomic force microscopy (AFM), we show that a sample of the Corona Heights Fault exhibits isotropic surface roughness well-described by a power law, with a Hurst exponent of 0.75 +/- 0.05 at all wavelengths from 60 nm to 10 μm. The roughness data and a recently proposed theoretical framework predict that yield strength varies with length scale as
Coblentz, W K; Nellis, S E; Hoffman, P C; Hall, M B; Weimer, P J; Esser, N M; Bertram, M G
2013-01-01
Sixty samples of 'ForagePlus' oat were selected from a previous plot study for analysis of in vitro gas production (IVGP) on the basis of 2 factors: (1) high (n=29) or low (n=31) neutral detergent fiber (NDF; 62.7±2.61 and 45.1±3.91%, respectively); and (2) the range of water-soluble carbohydrates (WSC) within the high- and low-NDF groups. For the WSC selection factor, concentrations ranged from 4.7 to 13.4% (mean=7.9±2.06%) and from 3.5 to 19.4% (mean=9.7±4.57%) within high- and low-NDF forages, respectively. Our objectives were to assess the relationships between IVGP and various agronomic or nutritional characteristics for high- and low-NDF fall-oat forages. Cumulative IVGP was fitted to a single-pool nonlinear regression model: Y=MAX × (1 - e ([-)(K)(× (t - lag)])), where Y=cumulative gas produced (mL), MAX=maximum cumulative gas produced with infinite incubation time (mL), K=rate constant, t=incubation time (h), and lag=discrete lag time (h). Generally, cumulative IVGP after 12, 24, 36, or 48h within high-NDF fall-oat forages was negatively correlated with NDF, hemicellulose, lignin, and ash, but positively correlated with WSC, nonfiber carbohydrate (NFC), and total digestible nutrients (TDN). For low-NDF fall-grown oat forages, IVGP was positively correlated with growth stage, canopy height, WSC, NFC, and TDN; negative correlations were observed with ash and crude protein (CP) but not generally with fiber components. These responses were also reflected in multiple regression analysis for high- and low-NDF forages. After 12, 24, or 36h of incubation, cumulative IVGP within high-NDF fall-oat forages was explained by complex regression equations utilizing (lignin:NDF)(2), lignin:NDF, hemicellulose, lignin, and TDN(2) as independent variables (R(2)≥0.43). Within low-NDF fall-grown oat forages, cumulative IVGP at these incubation intervals was explained by positive linear relationships with NFC that also exhibited high coefficients of determination (R(2)≥0.75). Gas production was accelerated at early incubation times within low-NDF forages, specifically in response to large pools of WSC that were most likely to be present as forages approached boot stage by late-fall. Copyright © 2013 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.
MANAGING TROUBLED DATA: COASTAL DATA PARTNERSHIPS SMOOTH DATA INTEGRATION
Understanding the ecology, condition, and changes of coastal areas requires data from many sources. Broad-scale and long-term ecological questions, such as global climate change, biodiversity, and cumulative impacts of human activities, must be addressed with databases that integ...
Finite-size scaling for discontinuous nonequilibrium phase transitions
NASA Astrophysics Data System (ADS)
de Oliveira, Marcelo M.; da Luz, M. G. E.; Fiore, Carlos E.
2018-06-01
A finite-size scaling theory, originally developed only for transitions to absorbing states [Phys. Rev. E 92, 062126 (2015), 10.1103/PhysRevE.92.062126], is extended to distinct sorts of discontinuous nonequilibrium phase transitions. Expressions for quantities such as response functions, reduced cumulants, and equal area probability distributions are derived from phenomenological arguments. Irrespective of system details, all these quantities scale with the volume, establishing the dependence on size. The approach generality is illustrated through the analysis of different models. The present results are a relevant step in trying to unify the scaling behavior description of nonequilibrium transition processes.
NASA Astrophysics Data System (ADS)
Zhang, Yu; Li, Yan; Shao, Hao; Zhong, Yaozhao; Zhang, Sai; Zhao, Zongxi
2012-06-01
Band structure and wave localization are investigated for sea surface water waves over large-scale sand wave topography. Sand wave height, sand wave width, water depth, and water width between adjacent sand waves have significant impact on band gaps. Random fluctuations of sand wave height, sand wave width, and water depth induce water wave localization. However, random water width produces a perfect transmission tunnel of water waves at a certain frequency so that localization does not occur no matter how large a disorder level is applied. Together with theoretical results, the field experimental observations in the Taiwan Bank suggest band gap and wave localization as the physical mechanism of sea surface water wave propagating over natural large-scale sand waves.
Tyson L. Swetnam; Christopher D. O' Connor; Ann M. Lynch
2016-01-01
A significant concern about Metabolic Scaling Theory (MST) in real forests relates to consistent differences between the values of power law scaling exponents of tree primary size measures used to estimate mass and those predicted by MST. Here we consider why observed scaling exponents for diameter and height relationships deviate from MST predictions across...
Earth Walk: Touring Our Planet's Inner Structure.
ERIC Educational Resources Information Center
Muller, Eric P.
1995-01-01
Describes an excursion that effectively helps students visualize the earth's immense size and numerous structures without the usual scale and ratio distortions found in most textbooks and allows students to compare their body's height to a scaled-down earth. (JRH)
Weak self-directed learning skills hamper performance in cumulative assessment.
Tio, René A; Stegmann, Mariken E; Koerts, Janke; van Os, Titus W D P; Cohen-Schotanus, Janke
2016-01-01
Self-regulated learning is an important determinant of academic performance. Previous research has shown that cumulative assessment encourages students to work harder and improve their results. However, not all students seem to respond as intended. We investigated the influence of students' behavioral traits on their responsiveness to a cumulative assessment strategy. The cumulative test results of a third-year integrated ten-week course unit were analyzed. The test was divided into three parts delivered at 4, 8 and 10 weeks. Low starters (below median) with low or high improvement (below or above the median) were identified and compared regarding their behavioral traits (assessed with the Temperament and Character Inventory questionnaire). A total of 295 students filled out the questionnaire. A percentage of 70% of the students below the median on the first two test parts improved during the final part. Students who were less responsive to improve their test results, scored low only on the TCI scale "self directedness" (t = 2.49; p = 0.011). Behavioral traits appear to influence student reactions to feedback on test results, with students with low self-directedness scores being particularly at risk. They can thus be identified and should receive special attention from student counselors.
NASA Astrophysics Data System (ADS)
Wang, P.; Huang, C.
2017-12-01
The three-dimensional (3D) structure of buildings and infrastructures is fundamental to understanding and modelling of the impacts and challenges of urbanization in terms of energy use, carbon emissions, and earthquake vulnerabilities. However, spatially detailed maps of urban 3D structure have been scarce, particularly in fast-changing developing countries. We present here a novel methodology to map the volume of buildings and infrastructures at 30 meter resolution using a synergy of Landsat imagery and openly available global digital surface models (DSMs), including the Shuttle Radar Topography Mission (SRTM), ASTER Global Digital Elevation Map (GDEM), ALOS World 3D - 30m (AW3D30), and the recently released global DSM from the TanDEM-X mission. Our method builds on the concept of object-based height profile to extract height metrics from the DSMs and use a machine learning algorithm to predict height and volume from the height metrics. We have tested this algorithm in the entire England and assessed our result using Lidar measurements in 25 England cities. Our initial assessments achieved a RMSE of 1.4 m (R2 = 0.72) for building height and a RMSE of 1208.7 m3 (R2 = 0.69) for building volume, demonstrating the potential of large-scale applications and fully automated mapping of urban structure.
NASA Astrophysics Data System (ADS)
Ichikawa, Kaoru; Akiyama, Hiroaki; Ebinuma, Takuji; Isoguchi, Osamu; Kimura, Noriaki; Kitazawa, Yukihito; Konda, Masanori; Kouguchi, Nobuyuki; Tamura, Hitoshi; Tomita, Hiroyuki; Yoshikawa, Yutaka; Waseda, Takuji
2016-04-01
There has been considerable interest in GNSS Reflectometry (GNSS-R) as a new remote-sensing method. We have started a research program for GNSS-R applications on oceanographic observations under the contract with MEXT (Ministry of Education Culture, Sports, Science and Technology, JAPAN) and launched a Japanese research consortium, GROWTH. It is aiming to evaluate the capabilities of GNSS-R observations for oceanographic phenomena with different time scales, such as ocean waves (1/10 to tens of seconds), tides (one or half days), and sea surface dynamic height (a few days to years). In situ observations of ocean wave spectrum, wind speed vertical profile, and sea surface height will be quantitatively compared with equivalent estimates from simultaneous GNSS-R measurements. The GROWTH project will utilize different types of observation platforms; marine observation towers (about 20 m height), multi-copters (about 100 to 200 m height), and much higher-altitude CYGNSS data. Cross-platform data, together with in situ oceanographic observations, will be compared after adequate temporal averaging that accounts differences of the footprint sizes and temporal and spatial scales of oceanographic phenomena. This paper will provide overview of the GROWTH project, preliminary test results obtained by the multi-sensor platform at observation towers, and preparation status of a ground station that will be supplied to receive CYGNSS data at Japan.
NASA Astrophysics Data System (ADS)
Brocks, Sebastian; Bendig, Juliane; Bareth, Georg
2016-10-01
Crop surface models (CSMs) representing plant height above ground level are a useful tool for monitoring in-field crop growth variability and enabling precision agriculture applications. A semiautomated system for generating CSMs was implemented. It combines an Android application running on a set of smart cameras for image acquisition and transmission and a set of Python scripts automating the structure-from-motion (SfM) software package Agisoft Photoscan and ArcGIS. Only ground-control-point (GCP) marking was performed manually. This system was set up on a barley field experiment with nine different barley cultivars in the growing period of 2014. Images were acquired three times a day for a period of two months. CSMs were successfully generated for 95 out of 98 acquisitions between May 2 and June 30. The best linear regressions of the CSM-derived plot-wise averaged plant-heights compared to manual plant height measurements taken at four dates resulted in a coefficient of determination R2 of 0.87 and a root-mean-square error (RMSE) of 0.08 m, with Willmott's refined index of model performance dr equaling 0.78. In total, 103 mean plot heights were used in the regression based on the noon acquisition time. The presented system succeeded in semiautomatedly monitoring crop height on a plot scale to field scale.
[Final size attained in type 1 diabetes children].
Galera Martínez, R; García García, E; Gámez Gómez, M D; Gómez Llorente, J L; Garrido Fernández, P; Bonillo Perales, A
2009-03-01
To describe the final height and height-gain in relation to target height, in children with type 1 diabetes mellitus, and analyse their relationship to different variables. Retrospective analysis of the growth data of 52 children (27 girls) diagnosed with type 1 diabetes mellitus before 14 years old, and followed up until their final height was attained. final height, target height, illness duration, glycated haemoglobin (HbA1c), insulin dose, BMI, and other autoimmune diseases. The height SDS (standard deviation scale) at diagnosis was slightly higher (0.734 in boys and 0.563 in girls). During the development of the disease, a growth reduction was seen, which was significantly higher in boys of prepubertal age (p = 0.016). The mean final height attained was 173.14 +/- 5.28 cm in boys and 161.9 +/- 6.97 cm in girls. Height gain was 1.56 +/- 3.66 in boys (SDS = -0.034) and 2.26 +/- 6.13 in girls (SDS = 0.385). The only variable significantly related to height gain was mean glycated-haemoglobin (growth reduction of 2 cm for every increment of 1% in mean glycated-haemoglobin). At onset, diabetic children were slightly taller than the general population. A growth reduction was shown as the disease developed, significantly higher in boys of prepubertal age. The final height in boys was slightly lower than the mean, but in girls was similar to the general population. Both sexes attained their target height, although the height gain was less in boys. Poorer metabolic control was associated with reduced height gain.
Validation Study on Alos Prism Dsm Mosaic and Aster Gdem 2
NASA Astrophysics Data System (ADS)
Tadono, T.; Takaku, J.; Shimada, M.
2012-07-01
This study aims to evaluate height accuracy of two datasets obtained by spaceborne optical instruments of a digital elevation data for a large-scale area. The digital surface model (DSM) was generated by the Panchromatic Remote-sensing Instrument for Stereo Mapping (PRISM) onboard the Advanced Land Observing Satellite (ALOS, nicknamed 'Daichi'), and the global digital elevation model (DEM) version 2 (GDEM-2) was derived from the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) onboard NASA's TERRA satellite. The test site of this study was the entire country of Bhutan, which is located on the southern slopes of the eastern Himalayas. Bhutan is not a large country, covering about 330 km from east to west, and 170 km from north to south; however, it has large height variation from 200 m to more than 7,000 m. This therefore makes it very interesting for validating digital topographic information in terms of national scale generation as well as wide height range. Regarding the reference data, field surveys were conducted in 2010 and 2011, and collected ground control points by a global positioning system were used for evaluating precise height accuracies in point scale as check points (CPs), with a 3 arc-sec DEM created by the Shuttle Radar Topography Mission (SRTM-3) used to validate the wide region. The results confirmed a root mean square error of 8.1 m for PRISM DSM and 29.4 m for GDEM-2 by CPs.
Backscattering from a Gaussian distributed, perfectly conducting, rough surface
NASA Technical Reports Server (NTRS)
Brown, G. S.
1977-01-01
The problem of scattering by random surfaces possessing many scales of roughness is analyzed. The approach is applicable to bistatic scattering from dielectric surfaces, however, this specific analysis is restricted to backscattering from a perfectly conducting surface in order to more clearly illustrate the method. The surface is assumed to be Gaussian distributed so that the surface height can be split into large and small scale components, relative to the electromagnetic wavelength. A first order perturbation approach is employed wherein the scattering solution for the large scale structure is perturbed by the small scale diffraction effects. The scattering from the large scale structure is treated via geometrical optics techniques. The effect of the large scale surface structure is shown to be equivalent to a convolution in k-space of the height spectrum with the following: the shadowing function, a polarization and surface slope dependent function, and a Gaussian factor resulting from the unperturbed geometrical optics solution. This solution provides a continuous transition between the near normal incidence geometrical optics and wide angle Bragg scattering results.
NASA Technical Reports Server (NTRS)
Dominguez, Anthony; Kleissl, Jan P.; Luvall, Jeffrey C.
2011-01-01
Large-eddy Simulation (LES) was used to study convective boundary layer (CBL) flow through suburban regions with both large and small scale heterogeneities in surface temperature. Constant remotely sensed surface temperatures were applied at the surface boundary at resolutions of 10 m, 90 m, 200 m, and 1 km. Increasing the surface resolution from 1 km to 200 m had the most significant impact on the mean and turbulent flow characteristics as the larger scale heterogeneities became resolved. While previous studies concluded that scales of heterogeneity much smaller than the CBL inversion height have little impact on the CBL characteristics, we found that further increasing the surface resolution (resolving smaller scale heterogeneities) results in an increase in mean surface heat flux, thermal blending height, and potential temperature profile. The results of this study will help to better inform sub-grid parameterization for meso-scale meteorological models. The simulation tool developed through this study (combining LES and high resolution remotely sensed surface conditions) is a significant step towards future studies on the micro-scale meteorology in urban areas.
Mapping cumulative noise from shipping to inform marine spatial planning.
Erbe, Christine; MacGillivray, Alexander; Williams, Rob
2012-11-01
Including ocean noise in marine spatial planning requires predictions of noise levels on large spatiotemporal scales. Based on a simple sound transmission model and ship track data (Automatic Identification System, AIS), cumulative underwater acoustic energy from shipping was mapped throughout 2008 in the west Canadian Exclusive Economic Zone, showing high noise levels in critical habitats for endangered resident killer whales, exceeding limits of "good conservation status" under the EU Marine Strategy Framework Directive. Error analysis proved that rough calculations of noise occurrence and propagation can form a basis for management processes, because spending resources on unnecessary detail is wasteful and delays remedial action.
Schomaker, Michael; Davies, Mary-Ann; Malateste, Karen; Renner, Lorna; Sawry, Shobna; N’Gbeche, Sylvie; Technau, Karl-Günter; Eboua, François; Tanser, Frank; Sygnaté-Sy, Haby; Phiri, Sam; Amorissani-Folquet, Madeleine; Cox, Vivian; Koueta, Fla; Chimbete, Cleophas; Lawson-Evi, Annette; Giddy, Janet; Amani-Bosse, Clarisse; Wood, Robin; Egger, Matthias; Leroy, Valeriane
2017-01-01
Background There is limited evidence regarding the optimal timing of initiating antiretroviral therapy (ART) in children. We conducted a causal modelling analysis in children aged 1–5 years from the International Epidemiologic Databases to Evaluate AIDS West/Southern-Africa collaboration to determine growth and mortality differences related to different CD4-based treatment initiation criteria, age groups and regions. Methods ART-naïve children of age 12–59 months at enrollment with at least one visit before ART initiation and one follow-up visit were included. We estimated 3-year growth and cumulative mortality from the start of follow-up for different CD4 criteria using g-computation. Results About one quarter of the 5826 included children was from West Africa (24.6%). The median (first; third quartile) CD4% at the first visit was 16% (11%;23%), the median weight-for-age z-scores and height-for-age z-scores were −1.5 (−2.7; −0.6) and −2.5 (−3.5; −1.5), respectively. Estimated cumulative mortality was higher overall, and growth was slower, when initiating ART at lower CD4 thresholds. After 3 years of follow-up, the estimated mortality difference between starting ART routinely irrespective of CD4 count and starting ART if either CD4 count<750 cells/mm3 or CD4%<25% was 0.2% (95%CI: −0.2%;0.3%), and the difference in the mean height-for-age z-scores of those who survived was −0.02 (95%CI: −0.04;0.01). Younger children aged 1–2 and children in West Africa had worse outcomes. Conclusions Our results demonstrate that earlier treatment initiation yields overall better growth and mortality outcomes, though we could not show any differences in outcomes between immediate ART and delaying until CD4 count/% falls below750/25%. PMID:26479876
Regional distribution of forest height and biomass from multisensor data fusion
Yifan Yu; Sassan Saatch; Linda S. Heath; Elizabeth LaPoint; Ranga Myneni; Yuri Knyazikhin
2010-01-01
Elevation data acquired from radar interferometry at C-band from SRTM are used in data fusion techniques to estimate regional scale forest height and aboveground live biomass (AGLB) over the state of Maine. Two fusion techniques have been developed to perform post-processing and parameter estimations from four data sets: 1 arc sec National Elevation Data (NED), SRTM...
Michael J. Falkowski; Andrew T. Hudak; Nicholas L. Crookston; Paul E. Gessler; Edward H. Uebler; Alistair M. S. Smith
2010-01-01
Sustainable forest management requires timely, detailed forest inventory data across large areas, which is difficult to obtain via traditional forest inventory techniques. This study evaluated k-nearest neighbor imputation models incorporating LiDAR data to predict tree-level inventory data (individual tree height, diameter at breast height, and...
Stepping over obstacles: anticipatory modifications in children with and without Down syndrome.
Virji-Babul, Naznin; Brown, Michelle
2004-12-01
The purpose of this study was to explore the mechanism of anticipatory control of gait in relation to the perception of an obstacle. Typically developing (TD) children (4-7 years of age) and children with Down syndrome (5-6 years of age) walked and stepped over obstacles of two different heights-a "subtle" obstacle that was placed at a very low distance from the floor (1% of total body height) and an "obvious" obstacle that was placed at a much higher distance from the floor (15% of total body height). Spatial and temporal measures of the gait cycle were analyzed. TD children showed increased variability in pre-obstacle step lengths only in response to the higher obstacle. Children with DS showed a decrease in variability in response to the higher obstacle and marked qualitative changes in their gait cycle. Both groups of children were able to scale toe clearance with obstacle height. These results show that TD young children can make task-specific anticipatory adjustments by modulating step length and toe clearance. Children with DS show appropriate scaling of toe clearance and are beginning to show the emergence of anticipatory responses under specific environmental conditions.
Additions to Mars Global Reference Atmospheric Model (MARS-GRAM)
NASA Technical Reports Server (NTRS)
Justus, C. G.; James, Bonnie
1992-01-01
Three major additions or modifications were made to the Mars Global Reference Atmospheric Model (Mars-GRAM): (1) in addition to the interactive version, a new batch version is available, which uses NAMELIST input, and is completely modular, so that the main driver program can easily be replaced by any calling program, such as a trajectory simulation program; (2) both the interactive and batch versions now have an option for treating local-scale dust storm effects, rather than just the global-scale dust storms in the original Mars-GRAM; and (3) the Zurek wave perturbation model was added, to simulate the effects of tidal perturbations, in addition to the random (mountain wave) perturbation model of the original Mars-GRAM. A minor modification was also made which allows heights to go 'below' local terrain height and return 'realistic' pressure, density, and temperature, and not the surface values, as returned by the original Mars-GRAM. This feature will allow simulations of Mars rover paths which might go into local 'valley' areas which lie below the average height of the present, rather coarse-resolution, terrain height data used by Mars-GRAM. Sample input and output of both the interactive and batch versions of Mars-GRAM are presented.
Additions to Mars Global Reference Atmospheric Model (Mars-GRAM)
NASA Technical Reports Server (NTRS)
Justus, C. G.
1991-01-01
Three major additions or modifications were made to the Mars Global Reference Atmospheric Model (Mars-GRAM): (1) in addition to the interactive version, a new batch version is available, which uses NAMELIST input, and is completely modular, so that the main driver program can easily be replaced by any calling program, such as a trajectory simulation program; (2) both the interactive and batch versions now have an option for treating local-scale dust storm effects, rather than just the global-scale dust storms in the original Mars-GRAM; and (3) the Zurek wave perturbation model was added, to simulate the effects of tidal perturbations, in addition to the random (mountain wave) perturbation model of the original Mars-GRAM. A minor modification has also been made which allows heights to go below local terrain height and return realistic pressure, density, and temperature (not the surface values) as returned by the original Mars-GRAM. This feature will allow simulations of Mars rover paths which might go into local valley areas which lie below the average height of the present, rather coarse-resolution, terrain height data used by Mars-GRAM. Sample input and output of both the interactive and batch version of Mars-GRAM are presented.
Ali, Muhammad Aslam; Kim, P J; Inubushi, K
2015-10-01
Effects of different soil amendments were investigated on methane (CH4) and nitrous oxide (N2O) emissions, global warming potential (GWP) and yield scaled GWPs in paddy soils of Republic of Korea, Japan and Bangladesh. The experimental treatments were NPK only, NPK+fly ash, NPK+silicate slag, NPK+phosphogypsum(PG), NPK+blast furnace slag (BFS), NPK+revolving furnace slag (RFS), NPK+silicate slag (50%)+RFS (50%), NPK+biochar, NPK+biochar+Azolla-cyanobacteria, NPK+silicate slag+Azolla-cyanobacteria, NPK+phosphogypsum (PG)+Azolla-cyanobacteria. The maximum decrease in cumulative seasonal CH4 emissions was recorded 29.7% and 32.6% with Azolla-cyanobacteria plus phospho-gypsum amendments in paddy soils of Japan and Bangladesh respectively, followed by 22.4% and 26.8% reduction with silicate slag plus Azolla-cyanobacteria application. Biochar amendments in paddy soils of Japan and Bangladesh decreased seasonal cumulative N2O emissions by 31.8% and 20.0% respectively, followed by 26.3% and 25.0% reduction with biochar plus Azolla-cyanobacteria amendments. Although seasonal cumulative CH4 emissions were significantly increased by 9.5-14.0% with biochar amendments, however, global warming potentials were decreased by 8.0-12.0% with cyanobacterial inoculation plus biochar amendments. The maximum decrease in GWP was calculated 22.0-30.0% with Azolla-cyanobacteria plus silicate slag amendments. The evolution of greenhouse gases per unit grain yield (yield scaled GWP) was highest in the NPK treatment, which was decreased by 43-50% from the silicate slag and phosphogypsum amendments along with Azolla-cyanobacteria inoculated rice planted soils. Conclusively, it is recommended to incorporate Azolla-cyanobacteria with inorganic and organic amendments for reducing GWP and yield scaled GWP from the rice planted paddy soils of temperate and subtropical countries. Copyright © 2015 Elsevier B.V. All rights reserved.
Linking the Scales of Scientific inquiry and Watershed Management: A Focus on Green Infrastructure
Urbanization modifies the hydrologic cycle, resulting in potentially deleterious downstream water quality and quantity effects. However, the cumulative interacting effects of water storage, transport, and biogeochemical processes occurring within other land cover and use types of...
A variable mixing-length ratio for convection theory
NASA Technical Reports Server (NTRS)
Chan, K. L.; Wolff, C. L.; Sofia, S.
1981-01-01
It is argued that a natural choice for the local mixing length in the mixing-length theory of convection has a value proportional to the local density scale height of the convective bubbles. The resultant variable mixing-length ratio (the ratio between the mixing length and the pressure scale height) of this theory is enhanced in the superadiabatic region and approaches a constant in deeper layers. Numerical tests comparing the new mixing length successfully eliminate most of the density inversion that typically plagues conventional results. The new approach also seems to indicate the existence of granular motion at the top of the convection zone.
Edge-induced Schottky barrier modulation at metal contacts to exfoliated molybdenum disulfide flakes
DOE Office of Scientific and Technical Information (OSTI.GOV)
Nouchi, Ryo, E-mail: r-nouchi@21c.osakafu-u.ac.jp
2016-08-14
Ultrathin two-dimensional semiconductors obtained from layered transition-metal dichalcogenides such as molybdenum disulfide (MoS{sub 2}) are promising for ultimately scaled transistors beyond Si. Although the shortening of the semiconductor channel is widely studied, the narrowing of the channel, which should also be important for scaling down the transistor, has been examined to a lesser degree thus far. In this study, the impact of narrowing on mechanically exfoliated MoS{sub 2} flakes was investigated according to the channel-width-dependent Schottky barrier heights at Cr/Au contacts. Narrower channels were found to possess a higher Schottky barrier height, which is ascribed to the edge-induced band bendingmore » in MoS{sub 2}. The higher barrier heights degrade the transistor performance as a higher electrode-contact resistance. Theoretical analyses based on Poisson's equation showed that the edge-induced effect can be alleviated by a high dopant impurity concentration, but this strategy should be limited to channel widths of roughly 0.7 μm because of the impurity-induced charge-carrier mobility degradation. Therefore, proper termination of the dangling bonds at the edges should be necessary for aggressive scaling with layered semiconductors.« less
Deformation of ferrofluid marbles in the presence of a permanent magnet.
Nguyen, Nam-Trung
2013-11-12
This paper investigates the deformation of ferrofluid marbles in the presence of a permanent magnet. Ferrofluid marbles are formed using a water-based ferrofluid and 1 μm hydrophobic polytetrafluoride particles. A marble placed on a Teflon coated glass plate deforms under gravity. In the presence of a permanent magnet, the marble is further deformed with a larger contact area. The geometric parameters are normalized by the radius of an undistorted spherical marble. The paper first discusses a scaling relationship between the dimensionless radius of the contact area as well as the dimensionless height and the magnetic Bond number. The dimensionless contact radius is proportional to the fourth root of the magnetic bond number. The dimensionless height scales with the inverse square root of the magnetic Bond number. In the case of a moving marble dragged by a permanent magnet, the deformation is evaluated as the difference between advancing and receding curvatures of the top view. The dimensionless height and the contact diameter of the marble do not significantly depend on the speed or the capillary number. The scaling analysis and experimental data show that the deformation is proportional to the capillary number.
NASA Astrophysics Data System (ADS)
Sarti, Pierguido; Abbondanza, Claudio; Petrov, Leonid; Negusini, Monia
2011-01-01
The impact of signal path variations (SPVs) caused by antenna gravitational deformations on geodetic very long baseline interferometry (VLBI) results is evaluated for the first time. Elevation-dependent models of SPV for Medicina and Noto (Italy) telescopes were derived from a combination of terrestrial surveying methods to account for gravitational deformations. After applying these models in geodetic VLBI data analysis, estimates of the antenna reference point positions are shifted upward by 8.9 and 6.7 mm, respectively. The impact on other parameters is negligible. To simulate the impact of antenna gravitational deformations on the entire VLBI network, lacking measurements for other telescopes, we rescaled the SPV models of Medicina and Noto for other antennas according to their size. The effects of the simulations are changes in VLBI heights in the range [-3, 73] mm and a net scale increase of 0.3-0.8 ppb. The height bias is larger than random errors of VLBI position estimates, implying the possibility of significant scale distortions related to antenna gravitational deformations. This demonstrates the need to precisely measure gravitational deformations of other VLBI telescopes, to derive their precise SPV models and to apply them in routine geodetic data analysis.
Geometry of the hemispherical radiometric footprint over plant canopies
NASA Astrophysics Data System (ADS)
Marcolla, B.; Cescatti, A.
2017-11-01
Radiometric measurements of hemispherical surface reflectance and long-wave irradiance are required to quantify the broadband albedo and the outgoing thermal radiation. These observations are typically integrated with eddy covariance measurements of sensible and latent heat fluxes to characterize the surface energy budget. While the aerodynamic footprint has been widely investigated, the geometry of the hemispherical radiometric footprint over plant canopies has been rarely tackled. In the present work, the size and shape of the hemispherical radiometric footprint are formalized for a bare surface and in presence of a vegetation cover. For this purpose, four idealized canopies are analyzed and the dependency of the radiometric footprint on leaf area index and canopy height is explored. Besides, the radiometric footprint is compared with the aerodynamic footprint in conditions of neutral stability. It was observed that almost 100% of the hemispherical radiometric signal originates within a distance of a few radiometer heights, while only about 50-80% of the cumulative aerodynamic signal is generated within a distance of about 20 sensor heights. In order to achieve comparable extensions of the footprint areas, hemispherical radiometric measurements should therefore be taken about 6-15 times higher than turbulent flux ones, depending on the vegetation type. The analysis also highlights that the size of the radiative footprint decreases at increasing leaf area index, whereas the aerodynamic footprint shows an opposite behavior. For the abovementioned reasons, this work may support the interpretation of energy flux measurements and the optimal design of eddy covariance stations located in heterogeneous sites.
NASA Astrophysics Data System (ADS)
Vuolo, Raffaella M.; Loubet, Benjamin; Mascher, Nicolas; Gueudet, Jean-Christophe; Durand, Brigitte; Laville, Patricia; Zurfluh, Olivier; Ciuraru, Raluca; Stella, Patrick; Trebs, Ivonne
2017-05-01
This study reports NO, NO2 and O3 mixing ratios and flux measurements using the eddy covariance method during a 7-month period over an oilseed-rape field, spanning an organic and a mineral fertilisation event. Cumulated NO emissions during the whole period were in agreement with previous studies and showed quite low emissions of 0.26 kg N ha-1 with an emission factor of 0.27 %, estimated as the ratio between total N emitted in the form of NO and total N input. The NO emissions were higher following organic fertilisation in August due to conditions favouring nitrification (soil water content around 20 % and high temperatures), while mineral fertilisation in February did not result in high emissions. The ozone deposition velocity increased significantly after organic fertilisation. The analysis of the chemical and turbulent transport times showed that reactions between NO, NO2 and O3 below the measurement height occurred constantly throughout the 7-month period. Following organic fertilisation, the NO ground fluxes were 30 % larger than the NO fluxes at the measurement height (3.2 m), while the NO2 fluxes switched from deposition to emission during certain periods, being negative at the surface and positive at the measurement height. This phenomenon of apparent NO2 emissions
appears to be significant during strong NO emissions and high O3 ambient mixing ratios, even on a bare soil during August.
Zhu-Barker, Xia; Burger, Martin; Horwath, William R; Green, Peter G
2016-06-01
Direct land application as an alternative to green waste (GW) disposal in landfills or composting requires an understanding of its impacts on greenhouse gas (GHG) and volatile organic compound (VOC) emissions. We investigated the effects of two approaches of GW direct land application, surface application and soil incorporation, on carbon dioxide (CO2), nitrous oxide (N2O) and methane (CH4), and VOC emissions for a 12month period. Five treatments were applied in fall 2013 on fallow land under a Mediterranean climate in California: 30cm height GW on surface; 15cm height GW on surface; 15cm height GW tilled into soil; control+till; control+no till. In addition, a laboratory experiment was conducted to develop a mechanistic understanding of the influence of GW application on soil O2 consumption and GHG emission. The annual cumulative N2O, CO2 and VOC emissions ranged from 1.6 to 5.5kgN2O-Nha(-1), 5.3 to 40.6MgCO2-Cha(-1) and 0.6 to 9.9kgVOCha(-1), respectively, and were greatly reduced by GW soil incorporation compared to surface application. Application of GW quickly consumed soil O2 within one day in the lab incubation. These results indicate that to reduce GHG and VOC emissions of GW direct land application, GW incorporation into soil is recommended. Copyright © 2016 Elsevier Ltd. All rights reserved.
Addressing scale dependence in roughness and morphometric statistics derived from point cloud data.
NASA Astrophysics Data System (ADS)
Buscombe, D.; Wheaton, J. M.; Hensleigh, J.; Grams, P. E.; Welcker, C. W.; Anderson, K.; Kaplinski, M. A.
2015-12-01
The heights of natural surfaces can be measured with such spatial density that almost the entire spectrum of physical roughness scales can be characterized, down to the morphological form and grain scales. With an ability to measure 'microtopography' comes a demand for analytical/computational tools for spatially explicit statistical characterization of surface roughness. Detrended standard deviation of surface heights is a popular means to create continuous maps of roughness from point cloud data, using moving windows and reporting window-centered statistics of variations from a trend surface. If 'roughness' is the statistical variation in the distribution of relief of a surface, then 'texture' is the frequency of change and spatial arrangement of roughness. The variance in surface height as a function of frequency obeys a power law. In consequence, roughness is dependent on the window size through which it is examined, which has a number of potential disadvantages: 1) the choice of window size becomes crucial, and obstructs comparisons between data; 2) if windows are large relative to multiple roughness scales, it is harder to discriminate between those scales; 3) if roughness is not scaled by the texture length scale, information on the spacing and clustering of roughness `elements' can be lost; and 4) such practice is not amenable to models describing the scattering of light and sound from rough natural surfaces. We discuss the relationship between roughness and texture. Some useful parameters which scale vertical roughness to characteristic horizontal length scales are suggested, with examples of bathymetric point clouds obtained using multibeam from two contrasting riverbeds, namely those of the Colorado River in Grand Canyon, and the Snake River in Hells Canyon. Such work, aside from automated texture characterization and texture segmentation, roughness and grain size calculation, might also be useful for feature detection and classification from point clouds.
Nanoscale Roughness of Faults Explained by the Scale-Dependent Yield Stress of Geologic Materials
NASA Astrophysics Data System (ADS)
Thom, C.; Brodsky, E. E.; Carpick, R. W.; Goldsby, D. L.; Pharr, G.; Oliver, W.
2017-12-01
Despite significant differences in their lithologies and slip histories, natural fault surfaces exhibit remarkably similar scale-dependent roughness over lateral length scales spanning 7 orders of magnitude, from microns to tens of meters. Recent work has suggested that a scale-dependent yield stress may result in such a characteristic roughness, but experimental evidence in favor of this hypothesis has been lacking. We employ an atomic force microscope (AFM) operating in intermittent-contact mode to map the topography of the Corona Heights fault surface. Our experiments demonstrate that the Corona Heights fault exhibits isotropic self-affine roughness with a Hurst exponent of 0.75 +/- 0.05 at all wavelengths from 60 nm to 10 μm. If yield stress controls roughness, then the roughness data predict that yield strength varies with length scale as λ-0.25 +/ 0.05. To test the relationship between roughness and yield stress, we conducted nanoindentation tests on the same Corona Heights sample and a sample of the Yair Fault, a carbonate fault surface that has been previously characterized by AFM. A diamond Berkovich indenter tip was used to indent the samples at a nominally constant strain rate (defined as the loading rate divided by the load) of 0.2 s-1. The continuous stiffness method (CSM) was used to measure the indentation hardness (which is proportional to yield stress) and the elastic modulus of the sample as a function of depth in each test. For both samples, the yield stress decreases with increasing size of the indents, a behavior consistent with that observed for many engineering materials and recently for other geologic materials such as olivine. The magnitude of this "indentation size effect" is best described by a power-law with exponents of -0.12 +/- 0.06 and -0.18 +/- 0.08 for the Corona Heights and Yair Faults, respectively. These results demonstrate a link between surface roughness and yield stress, and suggest that fault geometry is the physical manifestation of a scale-dependent yield stress.
NASA Astrophysics Data System (ADS)
Wurps, Hauke; Tambke, Jens; Steinfeld, Gerald; von Bremen, Lueder
2014-05-01
The development and design of wind energy converters for offshore wind farms require profound knowledge of the wind profile in the lower atmosphere. Especially an accurate and reliable estimation of turbulence, shear and veer are necessary for the prediction of energy production and loads. Currently existing wind energy turbines in the North Sea have hub heights of around 90 m and upper tip heights around 150 m, which is already higher than the highest measurement masts (e.g. FINO1: 103 m). The next generation of wind turbines will clearly outrange these altitudes, so the interest is to examine the atmosphere's properties above the North Sea up to 300 m. Therefore, besides the Prandtl layer also the Ekman layer has to be taken into account, which implies that changes of the wind direction with height become more relevant. For this investigation we use the Weather Research and Forecasting Model (WRF), a meso-scale numerical weather prediction system. In this study we compare different planetary boundary layer (PBL) schemes (MYJ, MYNN, QNSE) with the same high quality input from ECMWF used as boundary conditions (ERA-Interim). It was found in previous studies that the quality of the boundary conditions is crucially important for the accuracy of comparisons between different PBL schemes. This is due to the fact that the major source of meso-scale simulation errors is introduced by the driving boundary conditions and not by the different schemes of the meso-scale model itself. Hence, small differences in results from different PBL schemes can be distorted arbitrarily by coarse input data. For instance, ERA-Interim data leads to meso-scale RMSE values of 1.4 m/s at 100 m height above sea surface with mean wind speeds around 10 m/s, whereas other Reanalysis products lead to RMSEs larger than 2 m/s. Second, we compare our simulations to operational NWP results from the COSMO model (run by the DWD). In addition to the wind profile, also the turbulent kinetic energy (TKE) and the atmosphere's thermal stability are important to estimate power production and loads. Especially the TKE is in the focus of our research since the Master Length Scale of the closure schemes depends on it. A third step is the validation of the results using wind measurements around the North Sea. Because the considered heights are much larger than available data from met masts, we use LiDAR observations (light detection and ranging) and prospectively UAVs (unmanned aerial vehicle).
NASA Technical Reports Server (NTRS)
Aschwanden, Markus J.; Alexander, David; Hurlburt, Neal; Newmark, Jeffrey S.; Neupert, Werner M.; Klimchuk, J. A.; Gary, G. Allen
1999-01-01
In this paper we study the three-dimensional (3D) structure of hot (T(sub e) approximately equals 1.5 - 2.5 MK) loops in solar active region NOAA 7986, observed on 1996 August 30 with the Extreme-ultraviolet Imaging Telescope (EIT) onboard the Solar and Heliospheric Observatory (SoHO). This complements a first study on cooler (T(sub e) approximately equals 1.0 - 1.5 MK) loops of the same active region, using the same method of Dynamic Stereoscopy to reconstruct the 3D geometry. We reconstruct the 3D-coordinates x(s), y(s), z(s), the density n(sub e)(s), and temperature profile T(sub e)(s) of 35 individual loop segments (as function of the loop coordinate s) using EIT 195 A and 284 A images. The major findings are: (1) All loops are found to be in hydrostatic equilibrium, in the entire temperature regime of T(sub e) = 1.0 - 2.5 MK; (2) The analyzed loops have a height of 2-3 scale heights, and thus only segments extending over about one vertical scale height have sufficient emission measure contrast for detection; (3) The temperature gradient over the lowest scale height is of order dT/ds is approximately 1 - 4 K/km; (4) The radiative loss rate is found to exceed the conductive loss rate by about two orders or magnitude, making thermal conduction negligible to explain the temperature structure of the loops; (5) A steady-state can only be achieved when the heating rate E(sub H) matches the radiative loss rate in hydrostatic equilibrium, requiring a heat deposition length lambda(sub H) of the half density scale height lambda, predicting a scaling law with the loop base pressure, EH varies as p(sub 0 exp 2). This favors coronal heating mechanisms that operate near the loop footpoints; (6) We find a reciprocal correlation between the loop pressure p(sub 0) and loop length L, i.e. p(sub 0) varies as 1/L, implying a scaling law of the steady-state requirement with loop length, i.e. E(sub H ) varies as 1/L(exp 2). The heating rate shows no correlation with the loop-aligned magnetic field component B(sub z) at the footpoints, but is correlated with the azimuthal field B(sub phi) = Bz(RDelta Phi/L) of a twisted loop, and is thus consistent with heating mechanisms based on field-aligned currents.
Evidence of scaling of void probability in nucleus-nucleus interactions at few GeV energy
DOE Office of Scientific and Technical Information (OSTI.GOV)
Ghosh, Dipak; Biswas, Biswanath; Deb, Argha
1997-11-01
The rapidity gap probability in the {sup 24}Mg-AgBr interaction at 4.5GeV/c/nucleon has been studied in detail. The data reveal scaling behavior of the void probability in the central rapidity domain which confirms the validity of the linked-pair approximation for the N-particle cumulant correlation functions. This scaling behavior appears to be similar to the void probability in the Perseus-Pisces supercluster region of galaxies. {copyright} {ital 1997} {ital The American Physical Society}
Zhao, Wenguang; Qualls, Russell J; Berliner, Pedro R
2008-11-01
A two-concentric-loop iterative (TCLI) method is proposed to estimate the displacement height and roughness length for momentum and sensible heat by using the measurements of wind speed and air temperature at two heights, sensible heat flux above the crop canopy, and the surface temperature of the canopy. This method is deduced theoretically from existing formulae and equations. The main advantage of this method is that data measured not only under near neutral conditions, but also under unstable and slightly stable conditions can be used to calculate the scaling parameters. Based on the data measured above an Acacia Saligna agroforestry system, the displacement height (d0) calculated by the TCLI method and by a conventional method are compared. Under strict neutral conditions, the two methods give almost the same results. Under unstable conditions, d0 values calculated by the conventional method are systematically lower than those calculated by the TCLI method, with the latter exhibiting only slightly lower values than those seen under strictly neutral conditions. Computation of the average values of the scaling parameters for the agroforestry system showed that the displacement height and roughness length for momentum are 68% and 9.4% of the average height of the tree canopy, respectively, which are similar to percentages found in the literature. The calculated roughness length for sensible heat is 6.4% of the average height of the tree canopy, a little higher than the percentages documented in the literature. When wind direction was aligned within 5 degrees of the row direction of the trees, the average displacement height calculated was about 0.6 m lower than when the wind blew across the row direction. This difference was statistically significant at the 0.0005 probability level. This implies that when the wind blows parallel to the row direction, the logarithmic profile of wind speed is shifted lower to the ground, so that, at a given height, the wind speeds are faster than when the wind blows perpendicular to the row direction.
NASA Astrophysics Data System (ADS)
Urata, Yumi; Yamashita, Futoshi; Fukuyama, Eiichi; Noda, Hiroyuki; Mizoguchi, Kazuo
2017-06-01
We investigated the constitutive parameters in the rate- and state-dependent friction (RSF) law by conducting numerical simulations, using the friction data from large-scale biaxial rock friction experiments for Indian metagabbro. The sliding surface area was 1.5 m long and 0.5 m wide, slid for 400 s under a normal stress of 1.33 MPa at a loading velocity of either 0.1 or 1.0 mm/s. During the experiments, many stick-slips were observed and those features were as follows. (1) The friction drop and recurrence time of the stick-slip events increased with cumulative slip displacement in an experiment before which the gouges on the surface were removed, but they became almost constant throughout an experiment conducted after several experiments without gouge removal. (2) The friction drop was larger and the recurrence time was shorter in the experiments with faster loading velocity. We applied a one-degree-of-freedom spring-slider model with mass to estimate the RSF parameters by fitting the stick-slip intervals and slip-weakening curves measured based on spring force and acceleration of the specimens. We developed an efficient algorithm for the numerical time integration, and we conducted forward modeling for evolution parameters ( b) and the state-evolution distances (L_{{c}}), keeping the direct effect parameter ( a) constant. We then identified the confident range of b and L_{{c}} values. Comparison between the results of the experiments and our simulations suggests that both b and L_{{c}} increase as the cumulative slip displacement increases, and b increases and L_{{c}} decreases as the loading velocity increases. Conventional RSF laws could not explain the large-scale friction data, and more complex state evolution laws are needed.
Use of Awamori-pressed Lees and Tofu Lees as Feed Ingredients for Growing Female Goats
Nagamine, Itsuki; Sunagawa, Katsunori; Kishi, Tetsuya
2012-01-01
Okinawan Awamori is produced by fermenting steamed indica rice with black mold, yeast, and water. Awamori-pressed lees is a by-product of the Awamori production process. Tofu lees is a by-product of the Tofu production process. This research consisted of two experiments conducted to elucidate whether or not dried Awamori-pressed lees and Tofu lees can be used as a mixed feed ingredient for raising female goats. In experiment 1, digestion trials were conducted to ascertain the nutritive values of dried Awamori-pressed lees and dried Tofu lees for goats. The digestible crude protein (DCP) and total digestible nutrients (TDN) contents of dried Awamori-pressed lees and Tofu lees were 22.5%, 22.5% (DCP), and 87.2%, 94.4% (TDN) respectively. In experiment 2, 18 female goats (Japanese Saanen×Nubian, three months old, body weight 15.4±0.53 kg) were divided into three groups of six animals (control feed group (CFG), Awamori-pressed lees mixed feed group (AMFG), Tofu lees mixed feed group (TMFG)). The CFG control used feed containing 20% soybean meal as the main protein source, while the AMFG and TMFG treatments used feed mixed with 20% dried Awamori-pressed lees or dried Tofu lees. The groups were fed mixed feed (volume to provide 100 g/d increase in body weight) twice a day (10:00, 16:00). The klein grass hay and water was given ad libitum. The hay intake was measured at 08:00 and 16:00. Body weight and size measurements were taken once a month. At the end of the experiment, a blood sample was drawn from the jugular vein of each animal. The DCP and TDN intakes in AMFG and TMFG showed no significant difference to the CFG. Cumulative measurements of growth in body weight, withers height, chest depth, chest girth, and hip width over the 10 mo period in the AMFG and TMFG were similar to the CFG. By contrast, cumulative growth in body length and hip height in the AMFG and TMFG tended to be larger than the CFG. Cumulative growth in chest width in the AMFG was significantly larger (p<0.05) than the CFG. Blood parameter values were similar to those in normal goats reported by other scientists. The coats of the AMFG and TMFG animals looked shinier than the animals in the CFG. The results demonstrate that dried Awamori-pressed lees and Tofu lees can be used as a feed ingredient for the raising female goats. PMID:25049535
Ultrahigh vertical resolution radar measurements in the lower stratosphere at Arecibo
NASA Technical Reports Server (NTRS)
Ierkic, H. M.; Perillat, P.; Woodman, R. F.
1990-01-01
The paper reports on heretofore unprecedented observations of the turbulent layers in the lower stratosphere using the Arecibo 2380-MHz radar. Spectral profiles with about 20 m height and 15 s time resolutions at altitudes in the range 16-19 km are used to parametrize relevant characteristics of the turbulence, namely, vertical widths, distributions, lifetimes, and cutoffs height. These measurements validate previous deconvolved estimates and are free from contaminating factors like shear or beam broadening and partial reflections. Some theoretical predictions are verified, in particular those relating to the height of cutoff and the outer scale of the turbulence.
BCG Approaches for Improved Management of Estuaries
Estuaries and other complex aquatic systems are exposed to a variety of stressors that act at several scales, but are managed piecemeal - - often resulting in a “death by 1000 cuts” caused by cumulative impacts to these valued resources. To address this, managers need tools that...
Parton model description of multiparticle azimuthal correlations in p A collisions
Dusling, Kevin; Mace, Mark; Venugopalan, Raju
2018-01-25
In [1], an initial state “parton model” of quarks scattering off a dense nuclear target was shown to qualitatively reproduce the systematics of multiparticle azimuthal anisotropy cumulants measured in proton/deuteron-nucleus (pA) collisions at RHIC and the LHC. The systematics included i) the behavior of the four-particle cumulant c 2{4}, which generates a real four-particle second Fourier harmonic v 2{4}, ii) the ordering v 2{2} > v 2{4} ≈ v 2{6} ≈ v 2{8} for two-, four-, six-, and eight-particle Fourier harmonics, iii) the behavior of so-called symmetric cumulants SC(2,3) and SC(2,4). These features of azimuthal multiparticle cumulants were previously interpretedmore » as a signature of hydrodynamic flow; our results challenge this interpretation. We expand here upon our previous study and present further details and novel results on the saturation scale and transverse momentum (p ⊥) dependence of multiparticle azimuthal correlations. We find that the dependence of v 2{2} and v 2{4} on the number of color domains in the target varies with the p ⊥ window explored. We extend our prior discussion of symmetric cumulants and compute as yet unmeasured symmetric cumulants. We investigate the N c dependence of v 2{2} and v 2{4}. We contrast our results, which include multiple scatterings of each quark off the target, to the Glasma graph approximation, where each quark suffers at most two gluon exchanges with the target. We find that coherent multiple scattering is essential to obtain a positive definite v 2{4}. We provide an algorithm to compute expectation values of arbitrary products of the “dipole” lightlike Wilson line correlators.« less
Parton model description of multiparticle azimuthal correlations in p A collisions
DOE Office of Scientific and Technical Information (OSTI.GOV)
Dusling, Kevin; Mace, Mark; Venugopalan, Raju
In [1], an initial state “parton model” of quarks scattering off a dense nuclear target was shown to qualitatively reproduce the systematics of multiparticle azimuthal anisotropy cumulants measured in proton/deuteron-nucleus (pA) collisions at RHIC and the LHC. The systematics included i) the behavior of the four-particle cumulant c 2{4}, which generates a real four-particle second Fourier harmonic v 2{4}, ii) the ordering v 2{2} > v 2{4} ≈ v 2{6} ≈ v 2{8} for two-, four-, six-, and eight-particle Fourier harmonics, iii) the behavior of so-called symmetric cumulants SC(2,3) and SC(2,4). These features of azimuthal multiparticle cumulants were previously interpretedmore » as a signature of hydrodynamic flow; our results challenge this interpretation. We expand here upon our previous study and present further details and novel results on the saturation scale and transverse momentum (p ⊥) dependence of multiparticle azimuthal correlations. We find that the dependence of v 2{2} and v 2{4} on the number of color domains in the target varies with the p ⊥ window explored. We extend our prior discussion of symmetric cumulants and compute as yet unmeasured symmetric cumulants. We investigate the N c dependence of v 2{2} and v 2{4}. We contrast our results, which include multiple scatterings of each quark off the target, to the Glasma graph approximation, where each quark suffers at most two gluon exchanges with the target. We find that coherent multiple scattering is essential to obtain a positive definite v 2{4}. We provide an algorithm to compute expectation values of arbitrary products of the “dipole” lightlike Wilson line correlators.« less
Carroll, Allison J; Carnethon, Mercedes R; Liu, Kiang; Jacobs, David R; Colangelo, Laura A; Stewart, Jesse C; Carr, J Jeffrey; Widome, Rachel; Auer, Reto; Hitsman, Brian
2017-02-01
Evaluate whether smoking exposure and depressive symptoms accumulated over 25 years are synergistically associated with subclinical heart disease, measured by coronary artery calcification (CAC). Participants (baseline: 54.5% women; 51.5% Black; age range = 18-30 years) were followed prospectively from 1985 to 2010 in the Coronary Artery Risk Development in Young Adults (CARDIA) study. Smoking status was queried yearly from Year 0 to Year 25 to compute packyears of smoking exposure. Depressive symptoms were measured on the Center for Epidemiologic Studies Depression (CES-D) scale every 5 years to compute cumulative scores from Year 5 to Year 25. A three-level multinomial logistic regression was used to evaluate the association between cumulative smoking, cumulative depressive symptoms, and their interaction with moderate-risk CAC (score 1-99) and higher-risk CAC (score ≥100) compared with no CAC (score = 0) at Year 25. Models were adjusted for sociodemographic, clinical, and behavioral covariates. Among 3,189 adults, the cumulative Smoking × Depressive Symptoms interaction was not significant for moderate-risk CAC (p = .057), but was significant for higher-risk CAC (p = .001). For adults with a 30-packyear smoking history, average CES-D scores 2, 10, and 16 were, respectively, associated with odds ratios (95% confidence intervals) 3.40 (2.36-4.90), 4.82 (3.03-7.66), and 6.25 (3.31-11.83) for higher-risk CAC (all ps < .05). Cumulative smoking exposure and cumulative depressive symptoms have a synergistic association with subclinical heart disease, where higher lifetime smoking exposure and depressive symptoms are associated with greater odds of CAC. (PsycINFO Database Record (c) 2017 APA, all rights reserved).
Stochastic simulation of uranium migration at the Hanford 300 Area.
Hammond, Glenn E; Lichtner, Peter C; Rockhold, Mark L
2011-03-01
This work focuses on the quantification of groundwater flow and subsequent U(VI) transport uncertainty due to heterogeneity in the sediment permeability at the Hanford 300 Area. U(VI) migration at the site is simulated with multiple realizations of stochastically-generated high resolution permeability fields and comparisons are made of cumulative water and U(VI) flux to the Columbia River. The massively parallel reactive flow and transport code PFLOTRAN is employed utilizing 40,960 processor cores on DOE's petascale Jaguar supercomputer to simultaneously execute 10 transient, variably-saturated groundwater flow and U(VI) transport simulations within 3D heterogeneous permeability fields using the code's multi-realization simulation capability. Simulation results demonstrate that the cumulative U(VI) flux to the Columbia River is less responsive to fine scale heterogeneity in permeability and more sensitive to the distribution of permeability within the river hyporheic zone and mean permeability of larger-scale geologic structures at the site. Copyright © 2010 Elsevier B.V. All rights reserved.
NASA Astrophysics Data System (ADS)
Farrell, L. L.; McGovern, P. J.; Morgan, J. K.
2008-12-01
We have carried out 2-D numerical simulations using the discrete element method (DEM) to investigate density-driven deformation in volcanic edifices on Earth (e.g., Hawaii) and Mars (e.g., Olympus Mons and Arsia Mons). Located within volcanoes are series of magma chambers, reservoirs, and conduits where magma travels and collects. As magma differentiates, dense minerals settle out, building thick accumulations referred to as cumulates that can flow ductilely due to stresses imparted by gravity. To simulate this process, we construct granular piles subject to Coulomb frictional rheology, incrementally capture internal rectangular regions to which higher densities and lower interparticle friction values are assigned (analogs for denser, weaker cumulates), and then bond the granular edifice. Thus, following each growth increment, the edifice is allowed to relax gravitationally with a reconfigured weak cumulate core. The presence and outward spreading of the cumulate causes the development of distinctive structural and stratigraphic patterns. We obtained a range of volcanic shapes that vary from broad, shallowly dipping flanks reminiscent of those of Olympus Mons, to short, steep surface slopes more similar to Arsia Mons. Edifices lacking internal cumulate exhibit relatively horizontal strata compared to the high-angle, inward dipping strata that develops within the cumulate-bearing edifices. Our simulated volcanoes also illustrate a variety of gravity driven deformation features, including regions of thrust faulting within the flanks and large-scale flank collapses, as observed in Hawaii and inferred on Olympus Mons. We also see significant summit subsidence, and of particular interest, distinct summit calderas. The broad, flat caldera and convex upward profile of Arsia Mons appears to be well-simulated by cumulate-driven volcanic spreading. In contrast, the concave upward slopes of Olympus Mons are more challenging to reproduce, and instead are attributed to volcanic spreading along a pore-fluid- pressurized decollement with low basal friction.
Three scales of aerial photography compared for making stand measurements
Earl J. Rogers; Gene Avery; Roy A. Chapman
1959-01-01
Three scales of aerial photography were tested in an attempt to determine the best scale to use in forest surveying. This was done by comparing photo measurements of average tree height, average crown diameter, and crown-closure percent. These stand variables were selected for testing because of their applicability in making aerial estimates of timber volume.
Mai, Xiaodan; Sperrazza, Jill N; Marshall, Britt A; Hovey, Kathleen M; Wactawski-Wende, Jean
2016-01-01
Objective Self-reported height is commonly used in population obesity research. Evidence has also shown a positive association between depression and obesity. We examined the extent of height misreporting and its impact on body mass index (BMI) calculations and classification, and explored whether depression is associated with height misreporting. Methods The Buffalo Osteoporosis and Periodontal Disease Follow-up Study enrolled 1,015 postmenopausal women between 2002–2006. Participants self-reported their height on a questionnaire prior to stadiometer measurement at the clinical visit. Depressive symptoms were assessed using the Center for Epidemiologic Studies Depression Scale. Odds ratios (OR) and 95% confidence intervals (CI) for association between depression and height misreporting were estimated using logistic regression. Results Overall, 446 women (43.9%) misreported height by >½ inch, of which 296 (29.2%) underestimated and 150 (14.8%) overestimated their height. Height misreporting influenced BMI calculations by ≥1 unit in 12% of women, and influenced classification into WHO BMI categories in 8% of women. After adjusting for age, race, education, and measured BMI, women with significant depressive symptoms were more likely to misreport their height (OR=1.65, 95%CI: 1.04–2.61). Conclusions Height misreporting was common in older women and significantly influenced BMI calculations and classification. Obtaining objective data is thus important for studies investigating obesity-disease associations in this population, especially in those with significant depressive symptoms. PMID:27846053
Susanne Winter; Andreas Böck; Ronald E. McRoberts
2012-01-01
Tree diameter and height are commonly measured forest structural variables, and indicators based on them are candidates for assessing forest diversity. We conducted our study on the uncertainty of estimates for mostly large geographic scales for four indicators of forest structural gamma diversity: mean tree diameter, mean tree height, and standard deviations of tree...
Evaluation of the match between anthropometric measures and school furniture dimensions in Chile.
Castellucci, H I; Catalán, M; Arezes, P M; Molenbroek, J F M
2015-01-01
Students are exposed to the first systematic tasks or activities that a human being carries out in his/her life while at school. In this workplace situation, school furniture is a key factor for the adoption of proper body posture. The aim of this paper was to observe and determine the potential mismatch between school furniture dimensions and anthropometric characteristics of the students from the Valparaíso region of Chile. The sample consisted of 3,078 volunteer participants from 18 schools (public, semi-public, private). Eight anthropometric measures were gathered, together with six furniture dimensions. Mismatch analyses were carried out by using pre-defined mismatch criteria. Many different types of school furniture were presented at the schools. Also, a high level of mismatch was registered for seat height, desk height and seat-to-desk clearance. Finally, the analysis of all considered dimensions together showed that there was a high level of cumulative mismatch. It can be concluded that there were high levels of mismatch between the school furniture and student anthropometric characteristics and that this mismatch varied within the difference types of schools. This situation may have occurred because furniture acquisition was made without considering any ergonomic criteria.
Mapping Fearscapes of a Mammalian Herbivore using Terrestrial LiDAR and UAV Imagery
NASA Astrophysics Data System (ADS)
Olsoy, P.; Nobler, J. D.; Forbey, J.; Rachlow, J. L.; Burgess, M. A.; Glenn, N. F.; Shipley, L. A.
2013-12-01
Concealment allows prey animals to remain hidden from a predator and can influence both real and perceived risks of predation. The heterogeneous nature of vegetative structure can create a variable landscape of concealment - a 'fearscape' - that may influence habitat quality and use by prey. Traditional measurements of concealment rely on a limited number of distances, heights, and vantage points, resulting in small snapshots of concealment available to a prey animal. Our objective was to demonstrate the benefits of emerging remote sensing techniques to map fearscapes for pygmy rabbits (Brachylagus idahoensis) in sagebrush steppe habitat across a continuous range of scales. Specifically, we used vegetation height rasters derived from terrestrial laser scanning (TLS) to create viewsheds from multiple vantage points, representing predator visibility. The sum of all the viewsheds modeled horizontal concealment of prey at both the shrub and patch scales. We also used a small, unmanned aerial vehicle (UAV) to determine vertical concealment at a habitat scale. Terrestrial laser scanning provided similar estimates of horizontal concealment at the shrub scale when compared to photographic methods (R2 = 0.85). Both TLS and UAV provide the potential to quantify concealment of prey from multiple distances, heights, or vantage points, allowing the creation of a manipulable fearscape map that can be correlated with habitat use by prey animals. The predictive power of such a map also could identify shrubs or patches for fine scale nutritional and concealment analysis for future investigation and conservation efforts. Fearscape map at the mound-scale. Viewsheds were calculated from 100 equally spaced observer points located 4 m from the closest on-mound sagebrush of interest. Red areas offer low concealment, while green areas provide high concealment.
Estimating cumulative effects of clearcutting on stream temperatures
Bartholow, J.M.
2000-01-01
The Stream Segment Temperature Model was used to estimate cumulative effects of large-scale timber harvest on stream temperature. Literature values were used to create parameters for the model for two hypothetical situations, one forested and the other extensively clearcut. Results compared favorably with field studies of extensive forest canopy removal. The model provided insight into the cumulative effects of clearcutting. Change in stream shading was, as expected, the most influential factor governing increases in maximum daily water temperature, accounting for 40% of the total increase. Altered stream width was found to be more influential than changes to air temperature. Although the net effect from clearcutting was a 4oC warming, increased wind and reduced humidity tended to cool the stream. Temperature increases due to clearcutting persisted 10 km downstream into an unimpacted forest segment of the hypothetical stream, but those increases were moderated by cooler equilibrium conditions downstream. The model revealed that it is a complex set of factors, not single factors such as shade or air temperature, that governs stream temperature dynamics.
Qi, Xingliang; Liu, Yapeng; Zhang, Jing; Ji, Shuang; Sluiter, Judith K; Zhou, Renlai; Deng, Huihua
2015-11-01
The purpose of this study was to explore whether work strain (i.e., job demands and job control) and subjective need for recovery (NFR) after work are related to measured concentration of cumulative cortisol. Participants were 43 teachers recruited from kindergarten. They self-reported their NFR, job demands and job control over the last month. NFR was measured with the NFR scale. Job demands and control were assessed with the Chinese version of the Job Content Questionnaire. Hair cortisol was used to represent cumulative cortisol excretion. Hair cortisol concentration (HCC) was measured with high-performance liquid chromatography-tandem mass spectrometry. No significant correlations were found between job demands or job control and HCC. NFR was significantly and inversely correlated with HCC (r = -0.41, p = 0.006). The inverse association between NFR and HCC remained significant when age and job demands and job control were controlled for (p = 0.02). The activity of the hypothalamic-pituitary-adrenal axis declines with the accumulation of NFR after working time.
On the lower altitude limit of the Venusian ionopause
NASA Astrophysics Data System (ADS)
Mahajan, K. K.; Mayr, H. G.; Brace, L. H.; Cloutier, P. A.
1989-07-01
It has been observed from the plasma experiments on the Pioneer Venus Orbiter that the altitude of the upper boundary of the ionosphere decreases in response to increasing solar wind dynamic pressure. However, at pressures above about 2.5 x 10 to the -8th dynes/sq cm, the further decrease in the ionopause height is rather small. Following the model of Cloutier et al. (1969), it is suggested that during high solar wind conditions, when the ionopause is formed at lower altitudes, the solar wind induces vertical and horizontal flows which sweep away the ionospheric plasma that is produced locally by photoionization. As a result, a disturbed photodynamical ionosphere is formed which has the scale height of the ionizable neutral constituent. It is shown that such a photodynamical ionosphere is observed at the subsolar ionopause under these conditions. As a consequence of this interaction, the ionopause altitude is observed to follow the small-scale height of the ionizable species, atomic oxygen, showing only small changes with solar wind pressure.
Morphology and phase behavior of ethanol nanodrops condensed on chemically patterned surfaces
NASA Astrophysics Data System (ADS)
Checco, Antonio; Ocko, Benjamin M.
2008-06-01
Equilibrium wetting of ethanol onto chemically patterned nanostripes has been investigated using environmental atomic force microscopy (AFM) in noncontact mode. The chemical patterns are composed of COOH-terminated “wetting” regions and CH3 -terminated “nonwetting” regions. A specially designed environmental AFM chamber allowed for accurate measurements of droplet height as a function of the temperature offset between the substrate and a macroscopic ethanol reservoir. At saturation, the height dependence scales with droplet width according to w1/2 , in excellent agreement with the augmented Young equation (AYE) modeled with dispersive, nonretarded surface potentials. At small under- and oversaturations, the AYE model accurately fits the data if an effective ΔT is used as a fitting parameter. There is a systematic difference between the measured ΔT and the values extracted from the fits to the data. In addition to static measurements, we present time-resolved measurements of the droplet height which enable the study of condensation-evaporation dynamics of nanometer-scale drops.
NASA Astrophysics Data System (ADS)
Ma, Leiming
2015-04-01
Planetary Boundary Layer (PBL) plays an important role in transferring the energy and moisture from ocean to tropical cyclone (TC). Thus, the accuracy of PBL parameterization determines the performance of numerical model on TC prediction to a large extent. Among various components of PBL parameterization, the definition on the height of PBL is the first should be concerned, which determines the vertical scale of PBL and the associated processes of turbulence in different scales. However, up to now, there is lacked consensus on how to define the height of PBL in the TC research community. The PBL heights represented by current numerical models usually exhibits significant difference with TC observation (e.g., Zhang et al., 2011; Storm et al., 2008), leading to the rapid growth of error in TC prediction. In an effort to narrow the gap between PBL parameterization and reality, this study presents a new parameterization scheme for the definition of PBL height. Instead of using traditional definition for PBL height with Richardson number, which has been verified not appropriate for the strongly sheared structure of TC PBL in recent observation studies, the new scheme employs a dynamical definition based on the conception of helicity. In this sense the spiral structures associated with inflow layer and rolls are expected to be represented in PBL parameterization. By defining the PBL height at each grid point, the new scheme also avoids to assume the symmetric inflow layer that is usually implemented in observational studies. The new scheme is applied to the Yonsei University (YSU) scheme in the Weather Research and Forecasting (WRF) model of US National Center for Atmospheric Research (NCAR) and verified with numerical experiments on TC Morakot (2009), which brought torrential rainfall and disaster to Taiwan and China mainland during landfall. The Morakot case is selected in this study to examine the performance of the new scheme in representing various structures of PBL over land and ocean. The results of simulations show that, in addition to enhancing the PBL height in the situation of intensive convection, the new scheme also significantly reduces the PBL height and 2m-temperature over land during the night time, a well-known problem for YSU scheme according to previous studies. The activity of PBL processes are modulated due to the improved PBL height, which ultimately leads to the improvement of prediction on TC Morakot. Key Words: PBL; Parameterization; Numerical Prediction; Tropical Cyclone Acknowledgements. This study was jointly supported by the Chinese National 973 Project (No. 2013CB430300, and No. 2009CB421500) and grant from the National Natural Science Foundation (No. 41475059). References Zhang, J. A., R. F. Rogers, D. S. Nolan, and F. D. Marks Jr., 2011: On the characteristic height scales of the hurricane boundary layer, Mon. Weather Rev., 139, 2523-2535. Storm B., J. Dudhia, S. Basu, et al., 2008: Evaluation of the Weather Research and Forecasting Model on forecasting Low-level Jets: Implications for Wind Energy. Wind Energ., DOI: 10.1002/we.
A new method for detecting, quantifying and monitoring diffuse contamination
NASA Astrophysics Data System (ADS)
Fabian, Karl; Reimann, Clemens; de Caritat, Patrice
2017-04-01
A new method is presented for detecting and quantifying diffuse contamination at the regional to continental scale. It is based on the analysis of cumulative distribution functions (CDFs) in cumulative probability (CP) plots for spatially representative datasets, preferably containing >1000 samples. Simulations demonstrate how different types of contamination influence elemental CDFs of different sample media. Contrary to common belief, diffuse contamination does not result in exceedingly high element concentrations in regional- to continental-scale datasets. Instead it produces a distinctive shift of concentrations in the background distribution of the studied element resulting in a steeper data distribution in the CP plot. Via either (1) comparing the distribution of an element in top soil samples to the distribution of the same element in bottom soil samples from the same area, taking soil forming processes into consideration, or (2) comparing the distribution of the contaminating element (e.g., Pb) to that of an element with a geochemically comparable behaviour but no contamination source (e.g., Rb or Ba in case of Pb), the relative impact of diffuse contamination on the element concentration can be estimated either graphically in the CP plot via a best fit estimate or quantitatively via a Kolmogorov-Smirnov or Cramer vonMiese test. This is demonstrated using continental-scale geochemical soil datasets from Europe, Australia, and the USA, and a regional scale dataset from Norway. Several different datasets from Europe deliver comparable results at regional to continental scales. The method is also suitable for monitoring diffuse contamination based on the statistical distribution of repeat datasets at the continental scale in a cost-effective manner.
Cumulative effects of wildfires on forest dynamics in the eastern Cascade Mountains, USA.
Reilly, Matthew J; Elia, Mario; Spies, Thomas A; Gregory, Matthew J; Sanesi, Giovanni; Lafortezza, Raffaele
2018-03-01
Wildfires pose a unique challenge to conservation in fire-prone regions, yet few studies quantify the cumulative effects of wildfires on forest dynamics (i.e., changes in structural conditions) across landscape and regional scales. We assessed the contribution of wildfire to forest dynamics in the eastern Cascade Mountains, USA from 1985 to 2010 using imputed maps of forest structure (i.e., tree size and canopy cover) and remotely sensed burn severity maps. We addressed three questions: (1) How do dynamics differ between the region as a whole and the unburned portion of the region? (2) How do dynamics vary among vegetation zones differing in biophysical setting and historical fire frequency? (3) How have forest structural conditions changed in a network of late successional reserves (LSRs)? Wildfires affected 10% of forests in the region, but the cumulative effects at this scale were primarily slight losses of closed-canopy conditions and slight gains in open-canopy conditions. In the unburned portion of the region (the remaining 90%), closed-canopy conditions primarily increased despite other concurrent disturbances (e.g., harvest, insects). Although the effects of fire were largely dampened at the regional scale, landscape scale dynamics were far more variable. The warm ponderosa pine and cool mixed conifer zones experienced less fire than the region as a whole despite experiencing the most frequent fire historically. Open-canopy conditions increased slightly in the mixed conifer zone, but declined across the ponderosa pine zone even with wildfires. Wildfires burned 30% of the cold subalpine zone, which experienced the greatest increase in open-canopy conditions and losses of closed-canopy conditions. LSRs were more prone to wildfire than the region as a whole, and experienced slight declines in late seral conditions. Despite losses of late seral conditions, wildfires contributed to some conservation objectives by creating open habitats (e.g., sparse early seral and woodland conditions) that otherwise generally decreased in unburned landscapes despite management efforts to increase landscape diversity. This study demonstrates the potential for wildfires to contribute to regional scale conservation objectives, but implications for management and biodiversity at landscape scales vary geographically among biophysical settings, and are contingent upon historical dynamics and individual species habitat preferences. © 2017 by the Ecological Society of America.
The Compaction of Ultramafic Cumulates in Layered Intrusions - Time and Length Scales (Invited)
NASA Astrophysics Data System (ADS)
Schmidt, M. W.; Manoochehri, S.
2013-12-01
Many large mafic intrusions have thick series of mostly ultramafic cumulates composed of dense cumulus minerals (chromite, olivine, pyroxenes) precipitated from low viscosity (roughly basaltic) liquids. To understand the time and length scales involved, the crystal settling and compaction process was simulated through centrifuge-assisted experiments of olivine or chromite in basaltic melt. Experiments were performed in a centrifuging piston cylinder at 200-1500 g, 1200-1300 C, 0.5-1.1 GPa on previously annealed and texturally equilibrated samples. The mechanical settling of the dense olivine or chromite suspensions occurs at 1/6 and 1/2 the speed of simple Stokes settling. The porosity (φm ) of orthocumulates resulting from gravitational settling is 50-55 %, pile up times for natural grain sizes result to 0.1-10 m/day. Hence, gravitational deposition (including re-deposition) of crystals may take place within years, i.e. almost instantaneously with progressing crystallization. After (re-)deposition, grains rest on each other. Further (chemical) compaction occurs through pressure dissolution at grain contacts, olivine or chromite re-precipitates where in contact with melt. Concomitantly excess liquid is expulsed from the cumulate layer. Centrifugation let to porosities as low as 30.3 vol% for olivine. The crystal content at the bottom of the experimentally compacted cumulate is 1-φm ~ log(Δρ h a t), where Δρ = crystal-melt density difference, h = crystal layer thickness, a = acceleration and t = time. Compaction is hence proportional to effective stress integrated over time indicating that pressure dissolution is the dominant mechanism. Notably, chromite crystals compact only about half as fast as olivine crystals. The compaction limit, i.e. the lowermost porosity to be reached, is calculated by equating the lithostatic and hydraulic pressure gradients in the cumulate and results to 3-5 % porosity for the experiments. Crystal size distribution curves and a growth exponent n of 3.1(3) (for olivine) indicate that diffusion controlled Ostwald ripening is the dominant crystal growth mechanism. The experimentally calibrated compaction relationship, combined with a linear scaling for grain size as appropriate for reaction-controlled pressure solution creep, allows calculation of formation times of natural adcumulates. A single layer of olivine adcumulate of 1/2 m thickness with 70-75 vol% olivine at the base (as observed in Rhum), would have typical formation times of 0.4-3 yrs for grain sizes of 2-10 mm, comparing favourably with characteristic cooling times of sills. If a >20 m thick series of cumulate layers pressurizes a base layer with the porosity still filled by a melt, then compaction proceeds to the compaction limit within a few years. To understand the thickness of a simultaneously compacting (layered) crystal pile, (paleo)-porosity gradients determined from incompatible trace elements can be employed when combined with modelled characteristic cooling times. In layered mafic intrusions where cumulates are deposited from a large magma chamber, compaction zones of several tens to hundreds of meter may form adcumulates with porosities in the order of 5%. In conclusion, gravitation driven chemical compaction is feasible for dense mafic minerals in basaltic magmas, in particular in large layered intrusions. The limiting factor appears to be rather the supply of crystals then the time necessary for compaction.
Welding fume exposure and chronic obstructive pulmonary disease in welders.
Koh, D-H; Kim, J-I; Kim, K-H; Yoo, S-W
2015-01-01
Occupational exposure is estimated to contribute 15% to the burden of chronic obstructive pulmonary disease (COPD). Welding fumes are suspected to accelerate the decline of lung function and development of COPD. To examine the relationship between welding fume exposure and COPD in Korean shipyard welders. The study involved a group of male welders working at two shipyards who underwent an annual health examination in 2010. Subjects completed a questionnaire about smoking habits and occupational history and a pulmonary function test (PFT) was carried out with strict quality control measures. Welding fume exposure concentrations were estimated using 884 measurements taken between 2002 and 2009 in one of the shipyards. Multiple linear and logistic regression was employed to evaluate the association between cumulative fume exposure and lung function parameters, controlling for age, height and cigarette smoking. Two hundred and forty subjects participated, with a mean age of 48 and mean work duration of 15 years. The mean cumulative fume exposure was 7.7mg/m(3). The prevalence of COPD was 15%. FEV1 and FVC showed non-significant negative correlations with cumulative fume exposure. Odds ratios of COPD were significantly elevated for the middle (3.9; 95% CI 1.4-13.3) and high exposure groups (3.8; 95% CI 1.03-16.2) compared with the low fume exposure group. Our findings support an association between welding fume exposure and increased risk of COPD. Further prospective study is needed to investigate whether this is a causal relationship. © The Author 2014. Published by Oxford University Press on behalf of the Society of Occupational Medicine. All rights reserved. For Permissions, please email: journals.permissions@oup.com.
Counterintuitive effects of substrate roughness on PDCs
NASA Astrophysics Data System (ADS)
Andrews, B. J.; Manga, M.
2012-12-01
We model dilute pyroclastic density currents (PDCs) using scaled, warm, particle-laden density currents in a 6 m long, 0.6 m wide, 1.8 m tall air-filled tank. In this set of experiments, we run currents over substrates with characteristic roughness scales, hr, ranging over ~3 orders of magnitude from smooth, through 250 μm sandpaper, 0.1-, 1-, 2-, 5-, and 10 cm hemispheres. As substrate roughness increases, runout distance increases until a critical roughness height, hrc, is reached; further increases in roughness height decrease runout. The critical roughness height appears to be 0.25-0.5 htb, the thickness of the turbulent lower layer of the density currents. The dependence of runout on hr is most likely the result of increases in substrate roughness decreasing the average current velocity and converting that energy into increased turbulence intensity. Small values of hr thus result in increased runout as sedimentation is inhibited by the increased turbulence intensity. At larger values of hr current behavior is controlled by much larger decreases in average current velocity, even though sedimentation decreases. Scaling our experiments up to the size of real volcanic eruptions suggests that landscapes must have characteristic roughness hr>10 m to reduce the runout of natural PDCs, smaller roughness scales can increase runout. Comparison of relevant bulk (Reynolds number, densimetric and thermal Richardson numbers, excess buoyant thermal energy density) and turbulent (Stokes and settling numbers) between our experiments and natural dilute PDCs indicates that we are accurately modeling at least the large scale behaviors and dynamics of dilute PDCs.
Fundamentals of Zoological Scaling.
ERIC Educational Resources Information Center
Lin, Herbert
1982-01-01
The following animal characteristics are considered to determine how properties and characteristics of various systems change with system size (scaling): skeletal weight, speed of running, height and range of jumping, food consumption, heart rate, lifetime, locomotive efficiency, frequency of wing-flapping, and maximum sizes of flying and hovering…
Effects of Isometric Scaling on Vertical Jumping Performance
Bobbert, Maarten F.
2013-01-01
Jump height, defined as vertical displacement in the airborne phase, depends on vertical takeoff velocity. For centuries, researchers have speculated on how jump height is affected by body size and many have adhered to what has come to be known as Borelli’s law, which states that jump height does not depend on body size per se. The underlying assumption is that the amount of work produced per kg body mass during the push-off is independent of size. However, if a big body is isometrically downscaled to a small body, the latter requires higher joint angular velocities to achieve a given takeoff velocity and work production will be more impaired by the force-velocity relationship of muscle. In the present study, the effects of pure isometric scaling on vertical jumping performance were investigated using a biologically realistic model of the human musculoskeletal system. The input of the model, muscle stimulation over time, was optimized using jump height as criterion. It was found that when the human model was miniaturized to the size of a mouse lemur, with a mass of about one-thousandth that of a human, jump height dropped from 40 cm to only 6 cm, mainly because of the force-velocity relationship. In reality, mouse lemurs achieve jump heights of about 33 cm. By implication, the unfavourable effects of the small body size of mouse lemurs on jumping performance must be counteracted by favourable effects of morphological and physiological adaptations. The same holds true for other small jumping animals. The simulations for the first time expose and explain the sheer magnitude of the isolated effects of isometric downscaling on jumping performance, to be counteracted by morphological and physiological adaptations. PMID:23936494
Seasonal variation of the stratospheric circulation
NASA Technical Reports Server (NTRS)
Hirota, I.; Shiotani, M.
1985-01-01
An extensive analysis is made of the extratropical stratospheric circulation in terms of the seasonal variation of large-scale motion fields, with the aid of height and temperature data obtained from the TIROS satellite. Special attention is paid to a comparison of climatological aspects between the Northern Hemisphere (NH) and the Southern Hemisphere (SH). In order to see the general picture of the annual mach of the upper stratosphere, the zonal mean values of geopotential height of the 1 mb level at 70 deg N and 70 deg S were plotted on the daily basis throughout a year. It is observed that, during the winter, the zonal mean 1 mb height in the NH is much more variable than that in the SH. It is also notable that the SH height is rather oscillatory throughout the longer period from midwinter to early summer. Since the zonal mean height in the polar latitude is a rough measure of the mean zonal flow in extratropical latitudes, the difference of the seasonal variation between the two hemispheres mentioned above is considered to be due mainly to the planetary wave-mean flow interaction in the middle atmosphere. The wave activity in the middle atmosphere is represented more rigorously by the Eliassen-Palm flux associated with vertically propagating planetary waves forced from below. The day-to-day variation of the EP flux in the upper stratosphere shows that the wave activity varies intermittently with a characteristic time scale of about two weeks.
Tree height-diameter allometry across the United States.
Hulshof, Catherine M; Swenson, Nathan G; Weiser, Michael D
2015-03-01
The relationship between tree height and diameter is fundamental in determining community and ecosystem structure as well as estimates of biomass and carbon storage. Yet our understanding of how tree allometry relates to climate and whole organismal function is limited. We used the Forest Inventory and Analysis National Program database to determine height-diameter allometries of 2,976,937 individuals of 293 tree species across the United States. The shape of the allometric relationship was determined by comparing linear and nonlinear functional forms. Mixed-effects models were used to test for allometric differences due to climate and floristic (between angiosperms and gymnosperms) and functional groups (leaf habit and shade tolerance). Tree allometry significantly differed across the United States largely because of climate. Temperature, and to some extent precipitation, in part explained tree allometric variation. The magnitude of allometric variation due to climate, however, had a phylogenetic signal. Specifically, angiosperm allometry was more sensitive to differences in temperature compared to gymnosperms. Most notably, angiosperm height was more negatively influenced by increasing temperature variability, whereas gymnosperm height was negatively influenced by decreasing precipitation and increasing altitude. There was little evidence to suggest that shade tolerance influenced tree allometry except for very shade-intolerant trees which were taller for any given diameter. Tree allometry is plastic rather than fixed and scaling parameters vary around predicted central tendencies. This allometric variation provides insight into life-history strategies, phylogenetic history, and environmental limitations at biogeographical scales.
NASA Technical Reports Server (NTRS)
Kniffen, D. A.; Fichtel, C. E.; Thompson, D. J.
1976-01-01
Theoretical considerations and analysis of the results of gamma ray astronomy suggest that the galactic cosmic rays are dynamically coupled to the interstellar matter through the magnetic fields, and hence the cosmic ray density should be enhanced where the matter density is greatest on the scale of galactic arms. This concept has been explored in a galactic model using recent 21 cm radio observations of the neutral hydrogen and 2.6 mm observations of carbon monoxide, which is considered to be a tracer of molecular hydrogen. The model assumes: (1) cosmic rays are galactic and not universal; (2) on the scale of galactic arms, the cosmic ray column (surface) density is proportional to the total interstellar gas column density; (3) the cosmic ray scale height is significantly larger than the scale height of the matter; and (4) ours is a spiral galaxy characterized by an arm to interarm density ratio of about 3:1.
Maximum plant height and the biophysical factors that limit it.
Niklas, Karl J
2007-03-01
Basic engineering theory and empirically determined allometric relationships for the biomass partitioning patterns of extant tree-sized plants show that the mechanical requirements for vertical growth do not impose intrinsic limits on the maximum heights that can be reached by species with woody, self-supporting stems. This implies that maximum tree height is constrained by other factors, among which hydraulic constraints are plausible. A review of the available information on scaling relationships observed for large tree-sized plants, nevertheless, indicates that mechanical and hydraulic requirements impose dual restraints on plant height and thus, may play equally (but differentially) important roles during the growth of arborescent, large-sized species. It may be the case that adaptations to mechanical and hydraulic phenomena have optimized growth, survival and reproductive success rather than longevity and mature size.
Modeling Atmospheric Transport for Greenhouse Gas Observations within the Urban Dome
NASA Astrophysics Data System (ADS)
Nehrkorn, T.; Sargent, M. R.; Wofsy, S. C.
2016-12-01
Observations of CO2, CH4, and other greenhouse gases (GHGs) within the urban dome of major cities generally show large enhancements over background values, and large sensitivity to surface fluxes (as measured by the footprints computed by Lagrangian Particle Dispersion Models, LPDMs) within the urban dome. However, their use in top-down inversion studies to constrain urban emission estimates is complicated by difficulties in proper modeling of the atmospheric transport. We are conducting experiments with the Weather Research and Forecast model (WRF) coupled to the STILT LPDM to improve model simulation of atmospheric transport on spatial scales of a few km in urban domains, because errors in transport on short time/space scales are amplified by the patchiness of GHG emissions and may engender systematic errors of simulated concentrations.We are evaluating the quality of the meteorological simulations from model configurations with different resolutions and PBL packages, using both standard and non-standard (Lidar PBL height and ACARS aircraft profile) observations. To take into account the effect of building scale eddies for observations located on top of buildings, we are modifying the basic STILT algorithm for the computation of footprints by replacing the nominal receptor height by an effective sampling height. In addition, the footprint computations for near-field emissions make use of the vertical particle spread within the LPDM to arrive at a more appropriate estimate of mixing heights in the immediate vicinity of receptors. We present the effect of these and similar modifications on simulated concentrations and their level of agreement with observed values.
NASA Astrophysics Data System (ADS)
Li, Xiaowen; Janiga, Matthew A.; Wang, Shuguang; Tao, Wei-Kuo; Rowe, Angela; Xu, Weixin; Liu, Chuntao; Matsui, Toshihisa; Zhang, Chidong
2018-04-01
Evolution of precipitation structures are simulated and compared with radar observations for the November Madden-Julian Oscillation (MJO) event during the DYNAmics of the MJO (DYNAMO) field campaign. Three ground-based, ship-borne, and spaceborne precipitation radars and three cloud-resolving models (CRMs) driven by observed large-scale forcing are used to study precipitation structures at different locations over the central equatorial Indian Ocean. Convective strength is represented by 0-dBZ echo-top heights, and convective organization by contiguous 17-dBZ areas. The multi-radar and multi-model framework allows for more stringent model validations. The emphasis is on testing models' ability to simulate subtle differences observed at different radar sites when the MJO event passed through. The results show that CRMs forced by site-specific large-scale forcing can reproduce not only common features in cloud populations but also subtle variations observed by different radars. The comparisons also revealed common deficiencies in CRM simulations where they underestimate radar echo-top heights for the strongest convection within large, organized precipitation features. Cross validations with multiple radars and models also enable quantitative comparisons in CRM sensitivity studies using different large-scale forcing, microphysical schemes and parameters, resolutions, and domain sizes. In terms of radar echo-top height temporal variations, many model sensitivity tests have better correlations than radar/model comparisons, indicating robustness in model performance on this aspect. It is further shown that well-validated model simulations could be used to constrain uncertainties in observed echo-top heights when the low-resolution surveillance scanning strategy is used.
NASA Astrophysics Data System (ADS)
Inanç, Arda; Kösoğlu, Gülşen; Yüksel, Heba; Naci Inci, Mehmet
2018-06-01
A new fibre optic Lloyd's mirror method is developed for extracting 3-D height distribution of various objects at the micron scale with a resolution of 4 μm. The fibre optic assembly is elegantly integrated to an optical microscope and a CCD camera. It is demonstrated that the proposed technique is quite suitable and practical to produce an interference pattern with an adjustable frequency. By increasing the distance between the fibre and the mirror with a micrometre stage in the Lloyd's mirror assembly, the separation between the two bright fringes is lowered down to the micron scale without using any additional elements as part of the optical projection unit. A fibre optic cable, whose polymer jacket is partially stripped, and a microfluidic channel are used as test objects to extract their surface topographies. Point by point sensitivity of the method is found to be around 8 μm, changing a couple of microns depending on the fringe frequency and the measured height. A straightforward calibration procedure for the phase to height conversion is also introduced by making use of the vertical moving stage of the optical microscope. The phase analysis of the acquired image is carried out by One Dimensional Continuous Wavelet Transform for which the chosen wavelet is the Morlet wavelet and the carrier removal of the projected fringe patterns is achieved by reference subtraction. Furthermore, flexible multi-frequency property of the proposed method allows measuring discontinuous heights where there are phase ambiguities like 2π by lowering the fringe frequency and eliminating the phase ambiguity.
Ionosphere of Venus - First observations of the dayside ion composition near dawn and dusk
NASA Technical Reports Server (NTRS)
Taylor, H. A., Jr.; Brinton, H. C.; Bauer, S. J.; Hartle, R. E.; Donahue, T. M.; Cloutier, P. A.; Michel, F. C.; Daniell, R. E., Jr.; Blackwell, B. H.
1979-01-01
Independent Bennett radio-frequency ion mass spectrometers on the Pioneer Venus bus and orbiter spacecraft obtained in situ measurements of the composition of the ionosphere of Venus. The spectrometer on the bus explored the dawn region while the spectrometer on the orbiter explored the duskside region. Information on the ion composition in the topside, the lower ionosphere, and the upper ionosphere is presented. Below the O(+) peak near 200 km, the ions are found to exhibit scale heights consistent with a neutral gas temperature of about 180 K near the terminator. In the upper ionosphere, scale heights of all species reflect the effects of plasma transport.
Unit operations for gas-liquid mass transfer in reduced gravity environments
NASA Technical Reports Server (NTRS)
Pettit, Donald R.; Allen, David T.
1992-01-01
Basic scaling rules are derived for converting Earth-based designs of mass transfer equipment into designs for a reduced gravity environment. Three types of gas-liquid mass transfer operations are considered: bubble columns, spray towers, and packed columns. Application of the scaling rules reveals that the height of a bubble column in lunar- and Mars-based operations would be lower than terrestrial designs by factors of 0.64 and 0.79 respectively. The reduced gravity columns would have greater cross-sectional areas, however, by factors of 2.4 and 1.6 for lunar and Martian settings. Similar results were obtained for spray towers. In contract, packed column height was found to be nearly independent of gravity.
Vertical normal modes of a mesoscale model using a scaled height coordinate
NASA Technical Reports Server (NTRS)
Lipton, A. E.; Pielke, R. A.
1986-01-01
Vertical modes were derived for a version of the Colorado State Regional Atmospheric Mesoscale Modeling System. The impacts of three options for dealing with the upper boundary of the model were studied. The standard model formulation holds pressure constant at a fixed altitude near the model top, and produces a fastest mode with a speed of about 90 m/sec. An alternative formulation, which allows for an external mode, could require recomputation of vertical modes for every surface elevation on the horizontal grid unless the modes are derived in a particular way. These results have bearing on the feasibility of applying vertical mode initialization to models with scaled height coordinates.
Goldrick, Stephen; Lee, Kenneth; Spencer, Christopher; Holmes, William; Kuiper, Marcel; Turner, Richard; Farid, Suzanne S
2018-04-01
Glucose control is vital to ensure consistent growth and protein production in mammalian cell cultures. The typical fed-batch glucose control strategy involving bolus glucose additions based on infrequent off-line daily samples results in cells experiencing significant glucose concentration fluctuations that can influence product quality and growth. This study proposes an on-line method to control and manipulate glucose utilizing readily available process measurements. The method generates a correlation between the cumulative oxygen transfer rate and the cumulative glucose consumed. This correlation generates an on-line prediction of glucose that has been successfully incorporated into a control algorithm manipulating the glucose feed-rate. This advanced process control (APC) strategy enables the glucose concentration to be maintained at an adjustable set-point and has been found to significantly reduce the deviation in glucose concentration in comparison to conventional operation. This method has been validated to produce various therapeutic proteins across cell lines with different glucose consumption demands and is successfully demonstrated on micro (15 mL), laboratory (7 L), and pilot (50 L) scale systems. This novel APC strategy is simple to implement and offers the potential to significantly enhance the glucose control strategy for scales spanning micro-scale systems through to full scale industrial bioreactors. © 2018 The Authors. Biotechnology Journal Published by Wiley-VCH Verlag GmbH & Co. KGaA.
Rock Statistics at the Mars Pathfinder Landing Site, Roughness and Roving on Mars
NASA Technical Reports Server (NTRS)
Haldemann, A. F. C.; Bridges, N. T.; Anderson, R. C.; Golombek, M. P.
1999-01-01
Several rock counts have been carried out at the Mars Pathfinder landing site producing consistent statistics of rock coverage and size-frequency distributions. These rock statistics provide a primary element of "ground truth" for anchoring remote sensing information used to pick the Pathfinder, and future, landing sites. The observed rock population statistics should also be consistent with the emplacement and alteration processes postulated to govern the landing site landscape. The rock population databases can however be used in ways that go beyond the calculation of cumulative number and cumulative area distributions versus rock diameter and height. Since the spatial parameters measured to characterize each rock are determined with stereo image pairs, the rock database serves as a subset of the full landing site digital terrain model (DTM). Insofar as a rock count can be carried out in a speedier, albeit coarser, manner than the full DTM analysis, rock counting offers several operational and scientific products in the near term. Quantitative rock mapping adds further information to the geomorphic study of the landing site, and can also be used for rover traverse planning. Statistical analysis of the surface roughness using the rock count proxy DTM is sufficiently accurate when compared to the full DTM to compare with radar remote sensing roughness measures, and with rover traverse profiles.
Nie, Linda H.; Wright, Robert O.; Bellinger, David C.; Hussain, Javed; Amarasiriwardena, Chitra; Chettle, David R.; Pejović-Milić, Ana; woolf, Alan; Shannon, Michael
2011-01-01
Objective To find the best lead exposure assessment marker for children. Methods We recruited 11 children, calculated a cumulative blood lead index (CBLI) for the children, measured their concurrent BLL, assessed their development, and measured their bone lead level. Results Nine of 11 children had clinically significant neurodevelopment problems. CBLI and current blood lead level, but not the peak lead level, were significantly or marginally negatively associated with the full-scale IQ score. Conclusion Lead exposure at younger age significantly impacts a child’s later neurodevelopment. CBLI may be a better predictor of neurodevelopment than are current or peak blood lead levels. PMID:21827276
NASA Astrophysics Data System (ADS)
Kitazawa, Y.; Ichikawa, K.; Akiyama, H.; Ebinuma, T.; Isoguchi, O.; Kimura, N.; Konda, M.; Kouguchi, N.; Tamura, H.; Tomita, H.; Yoshikawa, Y.; Waseda, T.
2016-12-01
Global Navigation Satellite Systems (GNSS), such as GPS is a system of satellites that provide autonomous geo-spatial positioning with global coverage. It allows small electronic receivers to determine their location to high precision using radio signals transmitted from satellites, GNSS reflectometry (GNSS-R) involves making measurements from the reflections from the Earth of navigation signals from GNSS satellites. Reflected signals from sea surface are considered that those are useful to observe sea state and sea surface height. We have started a research program for GNSS-R applications on oceanographic observations under the contract with MEXT (Ministry of Education Culture, Sports, Science and Technology, JAPAN) and launched a Japanese research consortium, GROWTH (GNSS Reflectometry for Ocean Waves, Tides, and Height). It is aiming to evaluate the capabilities of GNSS-R observations for oceanographic phenomena with different time scales, such as ocean waves (1/10 to tens of seconds), tides (one or half days), and sea surface dynamic height (a few days to years). In situ observations of ocean wave spectrum, wind speed vertical profile, and sea surface height will be quantitatively compared with equivalent estimates from simultaneous GNSS-R measurements. The GROWTH project will utilize different types of observation platforms; marine observation towers (about 20 m height), multi-copters (about 100 to 150 m height), and much higher-altitude CYGNSS data. Cross-platform data, together with in situ oceanographic observations, will be compared after adequate temporal averaging that accounts differences of the footprint sizes and temporal and spatial scales of oceanographic phenomena. This paper will provide overview of the GROWTH project, preliminary test results, obtained by the multi-sensor platform at observation towers, suggest actual footprint sizes and identification of swell. Preparation status of a ground station which will be supplied to receive CYGNSS data at Japan, is also reported. Compatibility tests to CYGNSS data and refurbishment of the ground station were completed.
Wind-tunnel Modelling of Dispersion from a Scalar Area Source in Urban-Like Roughness
NASA Astrophysics Data System (ADS)
Pascheke, Frauke; Barlow, Janet F.; Robins, Alan
2008-01-01
A wind-tunnel study was conducted to investigate ventilation of scalars from urban-like geometries at neighbourhood scale by exploring two different geometries a uniform height roughness and a non-uniform height roughness, both with an equal plan and frontal density of λ p = λ f = 25%. In both configurations a sub-unit of the idealized urban surface was coated with a thin layer of naphthalene to represent area sources. The naphthalene sublimation method was used to measure directly total area-averaged transport of scalars out of the complex geometries. At the same time, naphthalene vapour concentrations controlled by the turbulent fluxes were detected using a fast Flame Ionisation Detection (FID) technique. This paper describes the novel use of a naphthalene coated surface as an area source in dispersion studies. Particular emphasis was also given to testing whether the concentration measurements were independent of Reynolds number. For low wind speeds, transfer from the naphthalene surface is determined by a combination of forced and natural convection. Compared with a propane point source release, a 25% higher free stream velocity was needed for the naphthalene area source to yield Reynolds-number-independent concentration fields. Ventilation transfer coefficients w T / U derived from the naphthalene sublimation method showed that, whilst there was enhanced vertical momentum exchange due to obstacle height variability, advection was reduced and dispersion from the source area was not enhanced. Thus, the height variability of a canopy is an important parameter when generalising urban dispersion. Fine resolution concentration measurements in the canopy showed the effect of height variability on dispersion at street scale. Rapid vertical transport in the wake of individual high-rise obstacles was found to generate elevated point-like sources. A Gaussian plume model was used to analyse differences in the downstream plumes. Intensified lateral and vertical plume spread and plume dilution with height was found for the non-uniform height roughness.
Morphologic Quality of DSMs Based on Optical and Radar Space Imagery
NASA Astrophysics Data System (ADS)
Sefercik, U. G.; Bayik, C.; Karakis, S.; Jacobsen, K.
2011-09-01
Digital Surface Models (DSMs) are representing the visible surface of the earth by the height corresponding to its X-, Y-location and height value Z. The quality of a DSM can be described by the accuracy and the morphologic details. Both depend upon the used input information, the used technique and the roughness of the terrain. The influence of the topographic details to the DSM quality is shown for the test fields Istanbul and Zonguldak. Zonguldak has a rough mountainous character with heights from sea level up to 1640m, while Istanbul is dominated by rolling hills going up to an elevation of 435m. DSMs from SPOT-5, the SRTM C-band height models and ASTER GDEM have been investigated. The DSMs have been verified with height models from large scale aerial photos being more accurate and including morphologic details. It was necessary to determine and respect shifts of the height models caused by datum problems and orientation of the height models. The DSM quality is analyzed depending upon the terrain inclination. The DSM quality differs for both test fields. The morphologic quality depends upon the point spacing of the analyzed DSMs and the terrain characteristics.
Modelling foot height and foot shape-related dimensions.
Xiong, Shuping; Goonetilleke, Ravindra S; Witana, Channa P; Lee Au, Emily Yim
2008-08-01
The application of foot anthropometry to design good-fitting footwear has been difficult due to the lack of generalised models. This study seeks to model foot dimensions so that the characteristic shapes of feet, especially in the midfoot region, can be understood. Fifty Hong Kong Chinese adults (26 males and 24 females) participated in this study. Their foot lengths, foot widths, ball girths and foot heights were measured and then evaluated using mathematical models. The results showed that there were no significant allometry (p > 0.05) effects of foot length on ball girth and foot width. Foot height showed no direct relationship with foot length. However, a normalisation with respect to foot length and foot height resulted in a significant relationship for both males and females with R(2) greater than 0.97. Due to the lack of a direct relationship between foot height and foot length, the current practice of grading shoes with a constant increase in height or proportionate scaling in response to foot length is less than ideal. The results when validated with other populations can be a significant way forward in the design of footwear that has an improved fit in the height dimension.
Influences of source condition and dissolution on bubble plume in a stratified environment
NASA Astrophysics Data System (ADS)
Chu, Shigan; Prosperetti, Andrea
2017-11-01
A cross-sectionally averaged model is used to study a bubble plume rising in a stratified quiescent liquid. Scaling analyses for the peel height, at which the plume momentum vanishes, and the neutral height, at which its average density equals the ambient density, are presented. Contrary to a widespread practice in the literature, it is argued that the neutral height cannot be identified with the experimentally reported intrusion height. Recognizing this difference provides an explanation of the reason why the intrusion height is found so frequently to lie so much above predictions, and brings the theoretical results in line with observations. The mathematical model depends on three dimensionless parameters, some of which are related to the inlet conditions at the plume source. Their influence on the peel and neutral heights is illustrated by means of numerical results. Aside from the source parameters, we incorporate dissolution of bubbles and the corresponding density change of plume into the model. Contrary to what's documented in literature, density change of plume due to dissolution plays an important role in keeping the total buoyancy of plume, thus alleviating the rapid decrease of peel height because of dissolution.
Bellone, S; Einaudi, S; Caputo, M; Prodam, F; Busti, A; Belcastro, S; Parlamento, S; Zavattaro, M; Verna, F; Bondone, C; Tessaris, D; Gasco, V; Bona, G; Aimaretti, G
2013-12-01
To assess the incidence of abnormal neuroendocrine function post-traumatic brain injuriy (TBI) in a large group of paediatric patients and its correlations with clinical parameters (Glasgow coma scale-GCS, Glasgow outcome scale-GOS, TC marshall scale, height velocity). We evaluated 70 patients [58 M, 12 F; age at the time of TBI (mean ± SEM) 8.12 ± 4.23 years] previously hospitalized for TBI at the "Regina Margherita" Hospital, in Turin and "Maggiore della Carità Hospital" in Novara, Italy, between 1998 and 2008. All patients included underwent: auxological, clinical, hormonal and biochemical assessments at recall (after at least 1 year from TBI to T0); auxological visit after 6 months (T6) and hormonal assessments at 12 months (T12) in patients with height velocity (HV) below the 25th centile. At T0, 4 cases of hypothalamus-pituitary dysfunction had been diagnosed; At T6 20/70 patients had an HV <25th centile, but no one had HV < the 3rd centile limit. At T12, among the 20 patients with HV <25th centile, in 13 patients the HV was below the 25th centile and GHRH + Arginine test has been performed. Four subjects demonstrated an impaired GH peak and were classified as GH deficiency (GHD). Of these 4 subjects, 3 subjects showed isolated GHD, while one patient showed multiple hypopituitarism presenting also secondary hypocortisolism and hypothyroidism. The GCS at admission and GOS do not correlate with the onset of hypopituitarism. A simple measurement of the height velocity at least 1 year after the TBI, is enough to recognize patients with a pituitary impairment related to GH deficiency. We suggest to follow-up paediatric population who had TBI with auxological evaluations every 6 months, limiting hormonal evaluation in patients with a reduction of height velocity below the 25th centile limit.
Scaling of xylem and phloem transport capacity and resource usage with tree size
Hölttä, Teemu; Kurppa, Miika; Nikinmaa, Eero
2013-01-01
Xylem and phloem need to maintain steady transport rates of water and carbohydrates to match the exchange rates of these compounds at the leaves. A major proportion of the carbon and nitrogen assimilated by a tree is allocated to the construction and maintenance of the xylem and phloem long distance transport tissues. This proportion can be expected to increase with increasing tree size due to the growing transport distances between the assimilating tissues, i.e., leaves and fine roots, at the expense of their growth. We formulated whole tree level scaling relations to estimate how xylem and phloem volume, nitrogen content and hydraulic conductance scale with tree size, and how these properties are distributed along a tree height. Xylem and phloem thicknesses and nitrogen contents were measured within varying positions in four tree species from Southern Finland. Phloem volume, nitrogen amount and hydraulic conductance were found to be concentrated toward the branch and stem apices, in contrast to the xylem where these properties were more concentrated toward the tree base. All of the species under study demonstrated very similar trends. Total nitrogen amount allocated to xylem and phloem was predicted to be comparable to the nitrogen amount allocated to the leaves in small and medium size trees, and to increase significantly above the nitrogen content of the leaves in larger trees. Total volume, hydraulic conductance and nitrogen content of the xylem were predicted to increase faster than that of the phloem with increasing tree height in small trees (<~10 m in height). In larger trees, xylem sapwood turnover to heartwood, if present, would maintain phloem conductance at the same level with xylem conductance with further increases in tree height. Further simulations with a previously published xylem-phloem transport model demonstrated that the Münch pressure flow hypothesis could explain phloem transport with increasing tree height even for the tallest trees. PMID:24367373
Measuring perceived ceiling height in a visual comparison task.
von Castell, Christoph; Hecht, Heiko; Oberfeld, Daniel
2017-03-01
When judging interior space, a dark ceiling is judged to be lower than a light ceiling. The method of metric judgments (e.g., on a centimetre scale) that has typically been used in such tasks may reflect a genuine perceptual effect or it may reflect a cognitively mediated impression. We employed a height-matching method in which perceived ceiling height had to be matched with an adjustable pillar, thus obtaining psychometric functions that allowed for an estimation of the point of subjective equality (PSE) and the difference limen (DL). The height-matching method developed in this paper allows for a direct visual match and does not require metric judgment. It has the added advantage of providing superior precision. Experiment 1 used ceiling heights between 2.90 m and 3.00 m. The PSE proved sensitive to slight changes in perceived ceiling height. The DL was about 3% of the physical ceiling height. Experiment 2 found similar results for lower (2.30 m to 2.50 m) and higher (3.30 m to 3.50 m) ceilings. In Experiment 3, we additionally varied ceiling lightness (light grey vs. dark grey). The height matches showed that the light ceiling appeared significantly higher than the darker ceiling. We therefore attribute the influence of ceiling lightness on perceived ceiling height to a direct perceptual rather than a cognitive effect.
Watershed Planning within a Quantitative Scenario Analysis Framework.
Merriam, Eric R; Petty, J Todd; Strager, Michael P
2016-07-24
There is a critical need for tools and methodologies capable of managing aquatic systems within heavily impacted watersheds. Current efforts often fall short as a result of an inability to quantify and predict complex cumulative effects of current and future land use scenarios at relevant spatial scales. The goal of this manuscript is to provide methods for conducting a targeted watershed assessment that enables resource managers to produce landscape-based cumulative effects models for use within a scenario analysis management framework. Sites are first selected for inclusion within the watershed assessment by identifying sites that fall along independent gradients and combinations of known stressors. Field and laboratory techniques are then used to obtain data on the physical, chemical, and biological effects of multiple land use activities. Multiple linear regression analysis is then used to produce landscape-based cumulative effects models for predicting aquatic conditions. Lastly, methods for incorporating cumulative effects models within a scenario analysis framework for guiding management and regulatory decisions (e.g., permitting and mitigation) within actively developing watersheds are discussed and demonstrated for 2 sub-watersheds within the mountaintop mining region of central Appalachia. The watershed assessment and management approach provided herein enables resource managers to facilitate economic and development activity while protecting aquatic resources and producing opportunity for net ecological benefits through targeted remediation.
Schroeder, Kari Britt; Asherson, Philip; Blake, Peter R; Fenstermacher, Susan K; Saudino, Kimberly J
2016-04-01
Cumulative culture ostensibly arises from a set of sociocognitive processes which includes high-fidelity production imitation, prosociality and group identification. The latter processes are facilitated by unconscious imitation or social mimicry. The proximate mechanisms of individual variation in imitation may thus shed light on the evolutionary history of the human capacity for cumulative culture. In humans, a genetic component to variation in the propensity for imitation is likely. A functional length polymorphism in the serotonin transporter gene, the short allele at 5HTTLPR, is associated with heightened responsiveness to the social environment as well as anatomical and activational differences in the brain's imitation circuity. Here, we evaluate whether this polymorphism contributes to variation in production imitation and social mimicry. Toddlers with the short allele at 5HTTLPR exhibit increased social mimicry and increased fidelity of demonstrated novel object manipulations. Thus, the short allele is associated with two forms of imitation that may underlie the human capacity for cumulative culture. The short allele spread relatively recently, possibly due to selection, and its frequency varies dramatically on a global scale. Diverse observations can be unified via conceptualization of 5HTTLPR as influencing the propensity to experience others' emotions, actions and sensations, potentially through the mirror mechanism. © 2016 The Author(s).
Muroi, Carl; Hugelshofer, Michael; Seule, Martin; Keller, Emanuela
2014-04-01
The degree of inflammatory response with cytokine release is associated with poor outcomes after aneurysmal subarachnoid hemorrhage (SAH). Previously, we reported on an association between systemic IL-6 levels and clinical outcome in patients with aneurysmal SAH. The intention was to assess the impact of nonsteroidal anti-inflammatory drugs (NSAIDs) and acetaminophen on the inflammatory response after SAH. Our method involved exploratory analysis of data and samples collected within a previous study. In 138 patients with SAH, systemic interleukin (IL-6) and c-reactive protein (CRP) were measured daily up to day 14 after SAH. The correlations among the cumulatively applied amount of NSAIDs, inflammatory parameters, and clinical outcome were calculated. An inverse correlation between cumulatively applied NSAIDs and both IL-6 and CRP levels was found (r = -0.437, p < 0.001 and r = -0.369, p < 0.001 respectively). Multivariable linear regression analysis showed a cumulative amount of NSAIDs to be independently predictive for systemic IL-6 and CRP levels. The cumulative amount of NSAIDs reduced the odds for unfavorable outcome, defined as Glasgow outcome scale 1-3. The results indicate a potential beneficial effect of NSAIDs in patients with SAH in terms of ameliorating inflammatory response, which might have an impact on outcome.
Zong, Xinnan; Li, Hui; Zhang, Yaqin; Wu, Huahong
2017-05-01
It is important to update weight-for-length/height growth curves in China and re-examine their performance in screening malnutrition. To develop weight-for-length/height growth curves for Chinese children and adolescents. A total of 94 302 children aged 0-19 years with complete sex, age, weight and length/height data were obtained from two cross-sectional large-scaled national surveys in China. Weight-for-length/height growth curves were constructed using the LMS method before and after average spermarcheal/menarcheal ages, respectively. Screening performance in prevalence estimates of wasting, overweight and obesity was compared between weight-for-height and body mass index (BMI) criteria based on a test population of 21 416 children aged 3-18. The smoothed weight-for-length percentiles and Z-scores growth curves with length 46-110 cm for both sexes and weight-for-height with height 70-180 cm for boys and 70-170 cm for girls were established. The weight-for-height and BMI-for-age had strong correlation in screening wasting, overweight and obesity in each age-sex group. There was no striking difference in prevalence estimates of wasting, overweight and obesity between two indicators except for obesity prevalence at ages 6-11. This set of smoothed weight-for-length/height growth curves may be useful in assessing nutritional status from infants to post-pubertal adolescents.
Indirect Self-Destructiveness and Emotional Intelligence.
Tsirigotis, Konstantinos
2016-06-01
While emotional intelligence may have a favourable influence on the life and psychological and social functioning of the individual, indirect self-destructiveness exerts a rather negative influence. The aim of this study has been to explore possible relations between indirect self-destructiveness and emotional intelligence. A population of 260 individuals (130 females and 130 males) aged 20-30 (mean age of 24.5) was studied by using the Polish version of the chronic self-destructiveness scale and INTE, i.e., the Polish version of the assessing emotions scale. Indirect self-destructiveness has significant correlations with all variables of INTE (overall score, factor I, factor II), and these correlations are negative. The intensity of indirect self-destructiveness differentiates significantly the height of the emotional intelligence and vice versa: the height of the emotional intelligence differentiates significantly the intensity of indirect self-destructiveness. Indirect self-destructiveness has negative correlations with emotional intelligence as well as its components: the ability to recognize emotions and the ability to utilize emotions. The height of emotional intelligence differentiates the intensity of indirect self-destructiveness, and vice versa: the intensity of indirect self-destructiveness differentiates the height of emotional intelligence. It seems advisable to use emotional intelligence in the prophylactic and therapeutic work with persons with various types of disorders, especially with the syndrome of indirect self-destructiveness.
Forest height Mapping using the fusion of Lidar and MULTI-ANGLE spectral data
NASA Astrophysics Data System (ADS)
Pang, Y.; Li, Z.
2016-12-01
Characterizing the complexity of forest ecosystem over large area is highly complex. Light detection and Ranging (LIDAR) approaches have demonstrated a high capacity to accurately estimate forest structural parameters. A number of satellite mission concepts have been proposed to fuse LiDAR with other optical imagery allowing Multi-angle spectral observations to be captured using the Bidirectional Reflectance Distribution Function (BRDF) characteristics of forests. China is developing the concept of Chinese Terrestrial Carbon Mapping Satellite. A multi-beam waveform Lidar is the main sensor. A multi-angle imagery system is considered as the spatial mapping sensor. In this study, we explore the fusion potential of Lidar and multi-angle spectral data to estimate forest height across different scales. We flew intensive airborne Lidar and Multi-angle hyperspectral data in Genhe Forest Ecological Research Station, Northeast China. Then extended the spatial scale with some long transect flights to cover more forest structures. Forest height data derived from airborne lidar data was used as reference data and the multi-angle hyperspectral data was used as model inputs. Our results demonstrate that the multi-angle spectral data can be used to estimate forest height with the RMSE of 1.1 m with an R2 approximately 0.8.
Xie, Tianwu; Kuster, Niels; Zaidi, Habib
2017-07-13
Computational phantoms are commonly used in internal radiation dosimetry to assess the amount and distribution pattern of energy deposited in various parts of the human body from different internal radiation sources. Radiation dose assessments are commonly performed on predetermined reference computational phantoms while the argument for individualized patient-specific radiation dosimetry exists. This study aims to evaluate the influence of body habitus on internal dosimetry and to quantify the uncertainties in dose estimation correlated with the use of fixed reference models. The 5-year-old IT'IS male phantom was modified to match target anthropometric parameters, including body weight, body height and sitting height/stature ratio (SSR), determined from reference databases, thus enabling the creation of 125 5-year-old habitus-dependent male phantoms with 10th, 25th, 50th, 75th and 90th percentile body morphometries. We evaluated the absorbed fractions and the mean absorbed dose to the target region per unit cumulative activity in the source region (S-values) of F-18 in 46 source regions for the generated 125 anthropomorphic 5-year-old hybrid male phantoms using the Monte Carlo N-Particle eXtended general purpose Monte Carlo transport code and calculated the absorbed dose and effective dose of five 18 F-labelled radiotracers for children of various habitus. For most organs, the S-value of F-18 presents stronger statistical correlations with body weight, standing height and sitting height than BMI and SSR. The self-absorbed fraction and self-absorbed S-values of F-18 and the absorbed dose and effective dose of 18 F-labelled radiotracers present with the strongest statistical correlations with body weight. For 18 F-Amino acids, 18 F-Brain receptor substances, 18 F-FDG, 18 F-L-DOPA and 18 F-FBPA, the mean absolute effective dose differences between phantoms of different habitus and fixed reference models are 11.4%, 11.3%, 10.8%, 13.3% and 11.4%, respectively. Total body weight, standing height and sitting height have considerable effects on human internal dosimetry. Radiation dose calculations for individual subjects using the most closely matched habitus-dependent computational phantom should be considered as an alternative to improve the accuracy of the estimates.
NASA Astrophysics Data System (ADS)
Xie, Tianwu; Kuster, Niels; Zaidi, Habib
2017-08-01
Computational phantoms are commonly used in internal radiation dosimetry to assess the amount and distribution pattern of energy deposited in various parts of the human body from different internal radiation sources. Radiation dose assessments are commonly performed on predetermined reference computational phantoms while the argument for individualized patient-specific radiation dosimetry exists. This study aims to evaluate the influence of body habitus on internal dosimetry and to quantify the uncertainties in dose estimation correlated with the use of fixed reference models. The 5-year-old IT’IS male phantom was modified to match target anthropometric parameters, including body weight, body height and sitting height/stature ratio (SSR), determined from reference databases, thus enabling the creation of 125 5-year-old habitus-dependent male phantoms with 10th, 25th, 50th, 75th and 90th percentile body morphometries. We evaluated the absorbed fractions and the mean absorbed dose to the target region per unit cumulative activity in the source region (S-values) of F-18 in 46 source regions for the generated 125 anthropomorphic 5-year-old hybrid male phantoms using the Monte Carlo N-Particle eXtended general purpose Monte Carlo transport code and calculated the absorbed dose and effective dose of five 18F-labelled radiotracers for children of various habitus. For most organs, the S-value of F-18 presents stronger statistical correlations with body weight, standing height and sitting height than BMI and SSR. The self-absorbed fraction and self-absorbed S-values of F-18 and the absorbed dose and effective dose of 18F-labelled radiotracers present with the strongest statistical correlations with body weight. For 18F-Amino acids, 18F-Brain receptor substances, 18F-FDG, 18F-L-DOPA and 18F-FBPA, the mean absolute effective dose differences between phantoms of different habitus and fixed reference models are 11.4%, 11.3%, 10.8%, 13.3% and 11.4%, respectively. Total body weight, standing height and sitting height have considerable effects on human internal dosimetry. Radiation dose calculations for individual subjects using the most closely matched habitus-dependent computational phantom should be considered as an alternative to improve the accuracy of the estimates.
Pearson, Adam M.; Lurie, Jon D.; Blood, Emily A.; Frymoyer, John W.; Braeutigam, Heike; An, Howard; Girardi, Federico P.; Weinstein, James N.
2009-01-01
STUDY DESIGN Subgroup analyses according to treatment received. OBJECTIVES To evaluate whether baseline radiographic findings predicted outcomes in patients with degenerative spondylolisthesis (DS). SUMMARY OF BACKGROUND DATA The SPORT combined randomized and observational DS cohorts. METHODS The Meyerding listhesis grade was determined on the neutral radiograph (n=222). Patients were classified as having low disk height if disk height was less than 5 mm. Flexion-extension radiographs (n=185) were evaluated for mobility. Those with greater than 10° rotation or 4mm translation were considered Hypermobile. Changes in outcome measures were compared between listhesis (Grade 1 vs. Grade 2), disk height (Low vs. Normal) and mobility (Stable vs. Hypermobile) groups using longitudinal regression models adjusted for potential confounders. Outcome measures included SF-36 bodily pain (BP) and physical function (PF) scales, Oswestry disability index (ODI), stenosis bothersomeness index (SBI), and low back pain bothersomeness scale. RESULTS Overall, 86% had a Grade 1 listhesis, 78% had Normal disk height, and 73% were Stable. Baseline symptom severity was similar between groups. Overall, surgery patients improved more than patients treated non-operatively. At one year, outcomes were similar in surgery patients across listhesis, disk height, and mobility groups (ODI: Grade 1 -23.7 vs. Grade 2 -23.3, p=0.90; Normal disk height-23.5 vs. Low disk height -21.9, p=0.66; Stable -21.6 vs. Hypermobile -25.2, p=0.30). Among those treated nonoperatively, Grade 1 patients improved more than Grade 2 patients (BP +13.1 vs. -4.9, p=0.019; ODI -8.0 vs. +4.8, p=0.010 at 1 year), and Hypermobile patients improved more than Stable patients (ODI -15.2 vs -6.6, p=0.041; SBI -7.8 vs -2.7, p=0.002 at 1 year). DISCUSSION Regardless of listhesis grade, disk height or mobility, patients who had surgery improved more than those treated non-operatively. These differences were due, in part, to differences in non-operative outcomes, which were better in patients classified as Grade 1 or Hypermobile. PMID:19050582
Helicopter rotor noise investigation during ice accretion
NASA Astrophysics Data System (ADS)
Cheng, Baofeng
An investigation of helicopter rotor noise during ice accretion is conducted using experimental, theoretical, and numerical methods. This research is the acoustic part of a joint helicopter rotor icing physics, modeling, and detection project at The Pennsylvania State University Vertical Lift Research Center of Excellence (VLRCOE). The current research aims to provide acoustic insight and understanding of the rotor icing physics and investigate the feasibility of detecting rotor icing through noise measurements, especially at the early stage of ice accretion. All helicopter main rotor noise source mechanisms and their change during ice accretion are discussed. Changes of the thickness noise, steady loading noise, and especially the turbulent boundary layer - trailing edge (TBL-TE) noise due to ice accretion are identified and studied. The change of the discrete frequency noise (thickness noise and steady loading noise) due to ice accretion is calculated by using PSU-WOPWOP, an advanced rotorcraft acoustic prediction code. The change is noticeable, but too small to be used in icing detection. The small thickness noise change is due to the small volume of the accreted ice compared to that of the entire blade, although a large iced airfoil shape is used. For the loading noise calculation, two simplified methods are used to generate the loading on the rotor blades, which is the input for the loading noise calculation: 1) compact loading from blade element momentum theory, icing effects are considered by increasing the drag coefficient; and 2) pressure loading from the 2-D CFD simulation, icing effects are considered by using the iced airfoil shape. Comprehensive rotor broadband noise measurements are carried out on rotor blades with different roughness sizes and rotation speeds in two facilities: the Adverse Environment Rotor Test Stand (AERTS) facility at The Pennsylvania State University, and The University of Maryland Acoustic Chamber (UMAC). In both facilities the measured high-frequency broadband noise increases significantly with increasing surface roughness heights, which indicates that it is feasible to quantify helicopter rotor ice-induced surface roughness through acoustic measurements. Comprehensive broadband noise measurements based on different accreted ice roughness at AERTS are then used to form the data base from which a correlation between the ice-induced surface roughness and the broadband noise level is developed. Two parameters, the arithmetic average roughness height, Ra, and the averaged roughness height, based on the integrated ice thickness at the blade tip, are introduced to describe the ice-induced surface roughness at the early stage of the ice accretion. The ice roughness measurements are correlated to the measured broadband noise level. Strong correlations (absolute mean deviations of 9.3% and 11.2% for correlation using Ra and the averaged roughness height respectively) between the ice roughness and the broadband noise level are obtained, which can be used as a tool to determine the accreted ice roughness in the AERTS facility through acoustic measurement. It might be possible to use a similar approach to develop an early ice accretion detection tool for helicopters, as well as to quantify the ice-induced roughness at the early stage of rotor ice accretion. Rotor broadband noise source identification is conducted and the broadband noise related to ice accretion is argued to be turbulent boundary layer - trailing edge (TBL-TE) noise. Theory suggests TBL-TE noise scales with Mach number to the fifth power, which is also observed in the experimental data. The trailing edge noise theories developed by Ffowcs Williams and Hall, and Howe both identify two important parameters: boundary layer thickness and turbulence intensity. Numerical studies of 2-D airfoils with different ice-induced surface roughness heights are conducted to investigate the extent that surface roughness impacts the boundary layer thickness and turbulence intensity (and ultimately the TBL-TE noise). The results show that boundary layer thickness and turbulence intensity at the trailing edge increase with the increased roughness height. Using Howe's trailing edge noise model, the increased sound pressure level (SPL) of the trailing edge noise due to the increased displacement thickness and normalized integrated turbulence intensity are 6.2 dB and 1.6 dB for large and small accreted ice roughness heights, respectively. The estimated increased SPL values agree well with the experimental results, which are 5.8 dB and 2.6 dB for large and small roughness height, respectively. Finally a detailed broadband noise spectral scaling for all measured broadband noise in both AERTS and UMAC facilities is conducted. The magnitude and the frequency spectrum of the measured broadband noise are scaled on characteristic velocity and length. The peak of the laminar boundary layer - vortex shedding (LBL-VS) noise coalesces well on the Strouhal scaling in those cases. For the measured broadband noise from a rotor with relatively large roughness heights, no contribution of the LBL-VS noise is observed. The velocity scaling shows that the TBL-TE noise, which is the dominant source mechanism, scales with Mach number to the fifth power based on the absolute frequency. The length scaling shows that the TBL-TE noise scales well on the absolute roughness height based on Howe's TE noise theory.
Lobo, Elena; Dalling, James W
2014-03-07
Treefall gaps play an important role in tropical forest dynamics and in determining above-ground biomass (AGB). However, our understanding of gap disturbance regimes is largely based either on surveys of forest plots that are small relative to spatial variation in gap disturbance, or on satellite imagery, which cannot accurately detect small gaps. We used high-resolution light detection and ranging data from a 1500 ha forest in Panama to: (i) determine how gap disturbance parameters are influenced by study area size, and the criteria used to define gaps; and (ii) to evaluate how accurately previous ground-based canopy height sampling can determine the size and location of gaps. We found that plot-scale disturbance parameters frequently differed significantly from those measured at the landscape-level, and that canopy height thresholds used to define gaps strongly influenced the gap-size distribution, an important metric influencing AGB. Furthermore, simulated ground surveys of canopy height frequently misrepresented the true location of gaps, which may affect conclusions about how relatively small canopy gaps affect successional processes and contribute to the maintenance of diversity. Across site comparisons need to consider how gap definition, scale and spatial resolution affect characterizations of gap disturbance, and its inferred importance for carbon storage and community composition.
Chapter 6. Temporal and spatial scales
Robert R. Ziemer
1997-01-01
Human activities have degraded substantial portions of the nationâs ecological resources, including physical and biological aquatic systems. The effects are continuing and cumulative, and few high-quality aquatic ecosystems remain in the United States. Concern about these diminishing resources has resulted in numerous restoration programs. Some are well conceived...
NASA Astrophysics Data System (ADS)
Chandrasekar, L. Bruno; Gnanasekar, K.; Karunakaran, M.
2018-06-01
The effect of δ-potential was studied in GaAs/Ga0.6Al0·4As double barrier heterostructure with Dresselhaus spin-orbit interaction. The role of barrier height and position of the δ- potential in the well region was analysed on spin-dependent electron tunneling using transfer matrix method. The spin-separation between spin-resonances on energy scale depends on both height and position of the δ- potential, whereas the tunneling life time of electrons highly influenced by the position of the δ- potential and not on the height. These results might be helpful for the fabrication of spin-filters.
NASA Technical Reports Server (NTRS)
Hasler, A. F.; Strong, J.; Woodward, R. H.; Pierce, H.
1991-01-01
Results are presented on an automatic stereo analysis of cloud-top heights from nearly simultaneous satellite image pairs from the GOES and NOAA satellites, using a massively parallel processor computer. Comparisons of computer-derived height fields and manually analyzed fields show that the automatic analysis technique shows promise for performing routine stereo analysis in a real-time environment, providing a useful forecasting tool by augmenting observational data sets of severe thunderstorms and hurricanes. Simulations using synthetic stereo data show that it is possible to automatically resolve small-scale features such as 4000-m-diam clouds to about 1500 m in the vertical.
Magnitude scale for the Central American tsunamis
NASA Astrophysics Data System (ADS)
Hatori, Tokutaro
1995-09-01
Based on the tsunami data in the Central American region, the regional characteristic of tsunami magnitude scales is discussed in relation to earthquake magnitudes during the period from 1900 to 1993. Tsunami magnitudes on the Imamura-Iida scale of the 1985 Mexico and 1992 Nicaragua tsunamis are determined to be m=2.5, judging from the tsunami height-distance diagram. The magnitude values of the Central American tsunamis are relatively small compared to earthquakes with similar size in other regions. However, there are a few large tsunamis generated by low-frequency earthquakes such as the 1992 Nicaragua earthquake. Inundation heights of these unusual tsunamis are about 10 times higher than those of normal tsunamis for the same earthquake magnitude ( M s =6.9 7.2). The Central American tsunamis having magnitude m>1 have been observed by the Japanese tide stations, but the effect of directivity toward Japan is very small compared to that of the South American tsunamis.
A flow resistance model for assessing the impact of vegetation on flood routing mechanics
NASA Astrophysics Data System (ADS)
Katul, Gabriel G.; Poggi, Davide; Ridolfi, Luca
2011-08-01
The specification of a flow resistance factor to account for vegetative effects in the Saint-Venant equation (SVE) remains uncertain and is a subject of active research in flood routing mechanics. Here, an analytical model for the flow resistance factor is proposed for submerged vegetation, where the water depth is commensurate with the canopy height and the roughness Reynolds number is sufficiently large so as to ignore viscous effects. The analytical model predicts that the resistance factor varies with three canonical length scales: the adjustment length scale that depends on the foliage drag and leaf area density, the canopy height, and the water level. These length scales can reasonably be inferred from a range of remote sensing products making the proposed flow resistance model eminently suitable for operational flood routing. Despite the numerous simplifications, agreement between measured and modeled resistance factors and bulk velocities is reasonable across a range of experimental and field studies. The proposed model asymptotically recovers the flow resistance formulation when the water depth greatly exceeds the canopy height. This analytical treatment provides a unifying framework that links the resistance factor to a number of concepts and length scales already in use to describe canopy turbulence. The implications of the coupling between the resistance factor and the water depth on solutions to the SVE are explored via a case study, which shows a reasonable match between empirical design standard and theoretical predictions.
Huang, Xiaowei; Zhang, Yanling; Meng, Long; Abbott, Derek; Qian, Ming; Wong, Kelvin K L; Zheng, Rongqing; Zheng, Hairong; Niu, Lili
2017-01-01
Carotid plaque echogenicity is associated with the risk of cardiovascular events. Gray-scale median (GSM) of the ultrasound image of carotid plaques has been widely used as an objective method for evaluation of plaque echogenicity in patients with atherosclerosis. We proposed a computer-aided method to evaluate plaque echogenicity and compared its efficiency with GSM. One hundred and twenty-five carotid plaques (43 echo-rich, 35 intermediate, 47 echolucent) were collected from 72 patients in this study. The cumulative probability distribution curves were obtained based on statistics of the pixels in the gray-level images of plaques. The area under the cumulative probability distribution curve (AUCPDC) was calculated as its integral value to evaluate plaque echogenicity. The classification accuracy for three types of plaques is 78.4% (kappa value, κ = 0.673), when the AUCPDC is used for classifier training, whereas GSM is 64.8% (κ = 0.460). The receiver operating characteristic curves were produced to test the effectiveness of AUCPDC and GSM for the identification of echolucent plaques. The area under the curve (AUC) was 0.817 when AUCPDC was used for training the classifier, which is higher than that achieved using GSM (AUC = 0.746). Compared with GSM, the AUCPDC showed a borderline association with coronary heart disease (Spearman r = 0.234, p = 0.050). Our experimental results suggest that AUCPDC analysis is a promising method for evaluation of plaque echogenicity and predicting cardiovascular events in patients with plaques.
Wang, Xiaoou; Tian, Yimei; Zhao, Xinhua; Peng, Chenrui
2017-06-01
Given that the common medium in existing green roofs is a single layer composed of organic and inorganic substrates, seven pilot-scale dual-substrate-layer extensive green roofs (G1-G7), which include nutrition and adsorption substrate layers, were constructed in this study. The effectiveness of porous inert substrates (activated charcoal, zeolite, pumice, lava, vermiculite and expanded perlite) used as the adsorption substrate for stormwater retention was investigated. A single-substrate-layer green roof (G8) was built for comparison with G1-G7. Despite the larger total rainfall depth (mm) of six types of simulated rains (43.2, 54.6, 76.2, 87.0, 85.2 and 86.4, respectively), the total percent retention of G1-G7 varied between 14% and 82% with an average of 43%, exhibiting better runoff-retaining capacity than G8 based on the maximum potential rainfall storage depth per unit height of adsorption substrate. Regression analysis showed that there was a logarithmic relationship between cumulative rainfall depth with non-zero runoff and stormwater retention for G1-G4 and a linear relationship for G5-G8. To enhance the water retention capacity and extend the service life of dual-substrate-layer extensive green roofs, the mixture of activated charcoal and/or pumice with expanded perlite and/or vermiculite is more suitable as the adsorption substrate than the mixture containing lava and/or zeolite.
THE MILKY WAY HAS NO DISTINCT THICK DISK
DOE Office of Scientific and Technical Information (OSTI.GOV)
Bovy, Jo; Rix, Hans-Walter; Hogg, David W., E-mail: bovy@ias.edu
2012-06-01
Different stellar sub-populations of the Milky Way's stellar disk are known to have different vertical scale heights, their thickness increasing with age. Using SEGUE spectroscopic survey data, we have recently shown that mono-abundance sub-populations, defined in the [{alpha}/Fe]-[Fe/H] space, are well described by single-exponential spatial-density profiles in both the radial and the vertical direction; therefore, any star of a given abundance is clearly associated with a sub-population of scale height h{sub z} . Here, we work out how to determine the stellar surface-mass density contributions at the solar radius R{sub 0} of each such sub-population, accounting for the survey selectionmore » function, and for the fraction of the stellar population mass that is reflected in the spectroscopic target stars given populations of different abundances and their presumed age distributions. Taken together, this enables us to derive {Sigma}{sub R{sub 0}}(h{sub z}), the surface-mass contributions of stellar populations with scale height h{sub z} . Surprisingly, we find no hint of a thin-thick disk bi-modality in this mass-weighted scale-height distribution, but a smoothly decreasing function, approximately {Sigma}{sub R{sub 0}}(h{sub z}){proportional_to} exp(-h{sub z}), from h{sub z} Almost-Equal-To 200 pc to h{sub z} Almost-Equal-To 1 kpc. As h{sub z} is ultimately the structurally defining property of a thin or thick disk, this shows clearly that the Milky Way has a continuous and monotonic distribution of disk thicknesses: there is no 'thick disk' sensibly characterized as a distinct component. We discuss how our result is consistent with evidence for seeming bi-modality in purely geometric disk decompositions or chemical abundances analyses. We constrain the total visible stellar surface-mass density at the solar radius to be {Sigma}{sub R{sub 0}}* = 30 {+-} 1 M{sub Sun} pc{sup -2}.« less
NASA Astrophysics Data System (ADS)
Sullivan, F.; Ollinger, S. V.; Palace, M. W.; Ouimette, A.; Sanders-DeMott, R.; Lepine, L. C.
2017-12-01
The correlation between near-infrared reflectance and forest canopy nitrogen concentration has been demonstrated at varying scales using a range of optical sensors on airborne and satellite platforms. Although the mechanism underpinning the relationship is unclear, at its basis are biologically-driven functional relationships of multiple plant traits that affect canopy chemistry and structure. The link between near-infrared reflectance and canopy nitrogen has been hypothesized to be partially driven by covariation of canopy nitrogen with canopy structure. In this study, we used a combination of airborne LiDAR data and field measured leaf and canopy chemical and structural traits to explore interrelationships between canopy nitrogen, near-infrared reflectance, and canopy structure on plots at Bartlett Experimental Forest in the White Mountain National Forest, New Hampshire. Over each plot, we developed a 1-meter resolution canopy height profile and a 1-meter resolution canopy height model. From canopy height profiles and canopy height models, we calculated a set of metrics describing the plot-level variability, breadth, depth, and arrangement of LiDAR returns. This combination of metrics was used to describe both vertical and horizontal variation in structure. In addition, we developed and measured several field-based metrics of leaf and canopy structure at the plot scale by directly measuring the canopy or by weighting leaf-level metrics by species leaf area contribution. We assessed relationships between leaf and structural metrics, near-infrared reflectance and canopy nitrogen concentration using multiple linear regression and mixed effects modeling. Consistent with our hypothesis, we found moderately strong links between both near-infrared reflectance and canopy nitrogen concentration with LiDAR-derived structural metrics, and we additionally found that leaf-level metrics scaled to the plot level share an important role in canopy reflectance. We suggest that canopy structure has a governing role in canopy reflectance, reducing maximum potential reflectance as structural complexity increases, and therefore also influences the relationship between canopy nitrogen and NIR reflectance.
Vertical gradients and seasonal variation in stem CO2 efflux within a Norway spruce stand.
Tarvainen, Lasse; Räntfors, Mats; Wallin, Göran
2014-05-01
Stem CO2 efflux is known to vary seasonally and vertically along tree stems. However, annual tree- and stand-scale efflux estimates are commonly based on measurements made only a few times a year, during daytime and at breast height. In this study, the effect of these simplifying assumptions on annual efflux estimates and their influence on the estimates of the importance of stems in stand-scale carbon cycling are evaluated. In order to assess the strength of seasonal, diurnal and along-stem variability in CO2 efflux, half-hourly measurements were carried out at three heights on three mature Norway spruce (Picea abies (L.) Karst.) trees over a period of 3 years. Making the common assumption of breast height efflux rates being representative of the entire stem was found to result in underestimations of 10-17% in the annual tree-scale CO2 efflux. Upscaling using only daytime measurements from breast height increased the underestimation to 15-20%. Furthermore, the results show that the strength of the vertical gradient varies seasonally, being strongest in the early summer and non-existent during the cool months. The observed seasonality in the vertical CO2 efflux gradient could not be explained by variation in stem temperature, temperature response of the CO2 efflux (Q10), outer-bark permeability, CO2 transport in the xylem or CO2 release from the phloem. However, the estimated CO2 concentration immediately beneath the bark was considerably higher in the upper stem during the main period of diameter growth, coinciding with the strongest vertical efflux gradient. These results suggest that higher growth rates in the upper stem are the main cause for the observed vertical variation in the stem CO2 effluxes. Furthermore, the results indicate that accounting for the vertical efflux variation is essential for assessments of the importance of stems in stand-scale carbon cycling. © The Author 2014. Published by Oxford University Press. All rights reserved.
New Perspectives on the Dynamical State of Extraplanar Diffuse Ionized Gas Layers
NASA Astrophysics Data System (ADS)
Boettcher, Erin; Zweibel, Ellen; Gallagher, John S.; Benjamin, Robert A.
2018-01-01
Gaseous, disk-halo interfaces are an important boundary in the baryon cycle in galaxies like the Milky Way, and their structure, support, and kinematics carry clues about the star formation feedback and accretion processes that produce them. Due to their unexpectedly large scale heights, which are often several times greater than their thermal scale heights, it is unclear whether they are in dynamical equilibrium, or are evidence of a galactic fountain, wind, or accretion flow. In the nearby, edge-on disk galaxies NGC 891 and NGC 5775, we test a dynamical equilibrium model of the extraplanar diffuse ionized gas (eDIG) layer by quantifying the thermal, turbulent, magnetic field, and cosmic ray pressure gradients using optical emission-line spectroscopy from the SparsePak IFU at the WIYN Observatory and the Robert Stobie Spectrograph on the Southern African Large Telescope and radio continuum observations from Continuum Halos in Nearby Galaxies - an EVLA Survey. The vertical pressure gradients are too shallow to produce the observed scale heights at the moderate galactocentric radii where the gas is believed to be found (R < 8 kpc). For the low-inclination galaxy M83, we develop a Markov Chain Monte Carlo method to decompose the [NII]λλ6548, 6583, Hα, and [SII]λλ6717, 6731 emission lines into multiple components, and identify eDIG emission based on its rotational velocity lag and elevated [NII]/Hα and [SII]/Hα line ratios. The median, line-of-sight velocity dispersion of the eDIG layer, σ = 96 km/s, greatly exceeds the horizontal velocity dispersions observed in edge-on eDIG layers (σ = 20 - 60 km/s), presenting the possibility that these layers have anisotropic random motions. The role of an anisotropic velocity dispersion in producing eDIG scale heights, as well as the absence of evidence for large-scale inflow or outflow, motivates further study of eDIG dynamics in face-on galaxies with a range of star formation rates. This work was supported by the NSF GRFP under Grant No. DGE-1256259.
Choi, Hyuk-Jae; Ko, Chang-Yong; Kang, Sungjae; Ryu, Jeicheong; Mun, Museong; Jeon, Hye-Seon
2015-02-01
Numerous elderly individuals use the four-wheeled walker (FWW) as a gait-assistive device. The walker's handgrip height is important for correct use. However, few clinical studies have investigated the biomechanical effects of the FWW's handgrip height on balance. Therefore, the present study assessed kinematic features of the gait, torso and pelvis during use of the FWW at two levels of handgrip height (48% vs 55% of the subject's height) while assessing balance in older adults. A total of 20 older adults were allocated into two groups according to the Berg Balance Scale (BBS): good balance (GB; BBS≥46) versus poor balance (PB; BBS<45). Participants walked with the FWW at 48% or 55% handgrip height for 10 m. Our study showed that the double-support period and stance phase significantly increased at 55% handgrip height, but the swing phase significantly decreased in the GB group. In the PB group, velocity and stride length significantly increased at 55% handgrip height. Tilt angle of the torso in the GB group was significantly lower at 55% than at 48% handgrip height, but no differences were observed in the PB group. In the pelvis, initial contact and toe-off angles of tilt were lower in the GB group at 55% handgrip height, but no differences were observed in the PB group. These results showed that kinematic features of the gait, torso, and pelvis in older adults using the FWW might be dependent on the handgrip height of the FWW and the patient's balance. Additionally, greater than 48% of the body height might be appropriate for older adults with poor balance. © 2014 Japan Geriatrics Society.
Li, Yan-qiong; Deng, Xiang-wen; Huang, Zhi-hong; Xiang, Wen-hua; Yan, Wen-de; Lei, Pi-feng; Zhou, Xiao-lu; Peng, Chang-hui
2015-01-01
Tree diameter at breast height (dbh) and height are the most important variables used in forest inventory and management as well as forest carbon-stock estimation. In order to identify the key stand variables that influence the tree height-dbh relationship and to develop and validate a suit of models for predicting tree height, data from 5961 tree samples aged from 6 years to 53 years and collected from 80 Chinese-fir plantation plots were used to fit 39 models, including 33 nonlinear models and 6 linear models, were developed and evaluated into two groups. The results showed that composite models performed better in height estimate than one-independent-variable models. Nonlinear composite Model 34 and linear composite Model 6 were recommended for predicting tree height in Chinese fir plantations with a dbh range between 4 cm and 40 cm when the dbh data for each tree and the quadratic mean dbh of the stand (Dq) and mean height of the stand (Hm) were available. Moreover, Hm could be estimated by using the formula Hm = 11.707 × l n(Dq)-18.032. Clearly, Dq was the primary stand variable that influenced the height-dbh relationship. The parameters of the models varied according to stand age and site. The inappropriate application of provincial or regional height-dbh models for predicting small tree height at local scale may result in larger uncertainties. The method and the recommended models developed in this study were statistically reliable for applications in growth and yield estimation for even-aged Chinese-fir plantation in Huitong and Changsha. The models could be extended to other regions and to other tree species only after verification in subtropical China.
Li, Yan-qiong; Deng, Xiang-wen; Huang, Zhi-hong; Xiang, Wen-hua; Yan, Wen-de; Lei, Pi-feng; Zhou, Xiao-lu; Peng, Chang-hui
2015-01-01
Tree diameter at breast height (dbh) and height are the most important variables used in forest inventory and management as well as forest carbon-stock estimation. In order to identify the key stand variables that influence the tree height-dbh relationship and to develop and validate a suit of models for predicting tree height, data from 5961 tree samples aged from 6 years to 53 years and collected from 80 Chinese-fir plantation plots were used to fit 39 models, including 33 nonlinear models and 6 linear models, were developed and evaluated into two groups. The results showed that composite models performed better in height estimate than one-independent-variable models. Nonlinear composite Model 34 and linear composite Model 6 were recommended for predicting tree height in Chinese fir plantations with a dbh range between 4 cm and 40 cm when the dbh data for each tree and the quadratic mean dbh of the stand (Dq) and mean height of the stand (Hm) were available. Moreover, Hm could be estimated by using the formula Hm=11.707×ln(Dq)-18.032. Clearly, Dq was the primary stand variable that influenced the height-dbh relationship. The parameters of the models varied according to stand age and site. The inappropriate application of provincial or regional height-dbh models for predicting small tree height at local scale may result in larger uncertainties. The method and the recommended models developed in this study were statistically reliable for applications in growth and yield estimation for even-aged Chinese-fir plantation in Huitong and Changsha. The models could be extended to other regions and to other tree species only after verification in subtropical China. PMID:25905458
NASA Technical Reports Server (NTRS)
Minzner, R. A.
1976-01-01
A graph was developed for relating delta T/T, the relative uncertainty in atmospheric temperature T, to delta p/p, the relative uncertainty in the atmospheric pressure p, for situations, when T is derived from the slope of the pressure-height profile. A similar graph relates delta T/T to delta roh/rho, the relative uncertainty in the atmospheric density rho, for those cases when T is derived from the downward integration of the density-height profile. A comparison of these two graphs shows that for equal uncertainties in the respective basic parameters, p or rho, smaller uncertainties in the derived temperatures are associated with density-height rather than with pressure-height data. The value of delta T/T is seen to depend not only upon delta p or delta rho, and to a small extent upon the value of T or the related scale height H, but also upon the inverse of delta h, the height increment between successive observations of p or rho. In the case of pressure-height data, delta T/T is dominated by 1/delta h for all values of delta h; for density-height data, delta T/T is dominated by delta rho/rho for delta h smaller than about 5 km. In the case of T derived from density-height data, this inverse relationship between delta T/T and delta h applies only for large values of delta h, that is, for delta h 35 km. No limit exists in the fineness of usable height resolution of T which may be derived from densities, while a fine height resolution in pressure-height data leads to temperature with unacceptably large uncertainties.
Cumulative Significance of Hyporheic Exchange and Biogeochemical Processing in River Networks
NASA Astrophysics Data System (ADS)
Harvey, J. W.; Gomez-Velez, J. D.
2014-12-01
Biogeochemical reactions in rivers that decrease excessive loads of nutrients, metals, organic compounds, etc. are enhanced by hydrologic interactions with microbially and geochemically active sediments of the hyporheic zone. The significance of reactions in individual hyporheic flow paths has been shown to be controlled by the contact time between river water and sediment and the intrinsic reaction rate in the sediment. However, little is known about how the cumulative effects of hyporheic processing in large river basins. We used the river network model NEXSS (Gomez-Velez and Harvey, submitted) to simulate hyporheic exchange through synthetic river networks based on the best available models of network topology, hydraulic geometry and scaling of geomorphic features, grain size, hydraulic conductivity, and intrinsic reaction rates of nutrients and metals in river sediment. The dimensionless reaction significance factor, RSF (Harvey et al., 2013) was used to quantify the cumulative removal fraction of a reactive solute by hyporheic processing. SF scales reaction progress in a single pass through the hyporheic zone with the proportion of stream discharge passing through the hyporheic zone for a specified distance. Reaction progress is optimal where the intrinsic reaction timescale in sediment matches the residence time of hyporheic flow and is less efficient in longer residence time hyporheic flow as a result of the decreasing proportion of river flow that is processed by longer residence time hyporheic flow paths. In contrast, higher fluxes through short residence time hyporheic flow paths may be inefficient because of the repeated surface-subsurface exchanges required to complete the reaction. Using NEXSS we found that reaction efficiency may be high in both small streams and large rivers, although for different reasons. In small streams reaction progress generally is dominated by faster pathways of vertical exchange beneath submerged bedforms. Slower exchange beneath meandering river banks mainly has importance only in large rivers. For solutes entering networks in proportion to water inputs it is the lower order streams that tend to dominate cumulative reaction progress.
NASA Technical Reports Server (NTRS)
Halpern, D.; Fu, L.; Knauss, W.; Pihos, G.; Brown, O.; Freilich, M.; Wentz, F.
1995-01-01
The following monthly mean global distributions for 1993 are presented with a common color scale and geographical map: 10-m height wind speed estimated from the Special Sensor Microwave Imager (SSMI) on a United States (U.S.) Air Force Defense Meteorological Satellite Program (DMSP) spacecraft; sea surface temperature estimated from the Advanced Very High Resolution Radiometer (AVHRR/2) on a U.S. National Oceanic and Atmospheric Administration (NOAA) satellite; 10-m height wind speed and direction estimated from the Active Microwave Instrument (AMI) on the European Space Agency (ESA) European Remote Sensing (ERS-1) satellite; sea surface height estimated from the joint U.S.-France Topography Experiment (TOPEX)/POSEIDON spacecraft; and 10-m height wind speed and direction produced by the European Center for Medium-Range Weather Forecasting (ECMWF). Charts of annual mean, monthly mean, and sampling distributions are displayed.
Diego A. Riveros-Iregui; Brian L. McGlynn
2009-01-01
We investigated the spatial and temporal variability of soil CO2 efflux across 62 sites of a 393-ha complex watershed of the northern Rocky Mountains. Growing season (83 day) cumulative soil CO2 efflux varied from ~300 to ~2000 g CO2 m-2, depending upon landscape position, with a median of 879.8 g CO2 m-2. Our findings revealed that highest soil CO2 efflux rates were...
NASA Astrophysics Data System (ADS)
Olurotimi, E. O.; Sokoya, O.; Ojo, J. S.; Owolawi, P. A.
2018-03-01
Rain height is one of the significant parameters for prediction of rain attenuation for Earth-space telecommunication links, especially those operating at frequencies above 10 GHz. This study examines Three-parameter Dagum distribution of the rain height over Durban, South Africa. 5-year data were used to study the monthly, seasonal, and annual variations using the parameters estimated by the maximum likelihood of the distribution. The performance estimation of the distribution was determined using the statistical goodness of fit. Three-parameter Dagum distribution shows an appropriate distribution for the modeling of rain height over Durban with the Root Mean Square Error of 0.26. Also, the shape and scale parameters for the distribution show a wide variation. The probability exceedance of time for 0.01% indicates the high probability of rain attenuation at higher frequencies.
The height of electron content changes in the ionosphere from ATS 6 beacon data
NASA Technical Reports Server (NTRS)
Davies, K.; Heron, M. L.
1984-01-01
A technique is described which uses relative changes in Faraday rotation and modulation phase of satellite radio signals to determine the median height of the enhancement (or depletion) in the electron density of the ionosphere. During the post sunrise formation of the F layer the incremental layers have a median height of around 210 km (+ or - 40) and in the afternoon the decremental median is above the peak at 340 km (+ or - 40) on a winter day. A winter nighttime enhancement just after midnight appears as a thick layer extending upwards from the peak, with a median height at about 730 km. The method applies to large scale irregularities but not to small, dense, scintillation-causing irregularities for which Faraday and modulation phases do not represent the total electron content.
DOE Office of Scientific and Technical Information (OSTI.GOV)
M. P. Jensen; Toto, T.
Standard Atmospheric Radiation Measurement (ARM) Climate Research Facility sounding files provide atmospheric state data in one dimension of increasing time and height per sonde launch. Many applications require a quick estimate of the atmospheric state at higher time resolution. The INTERPOLATEDSONDE (i.e., Interpolated Sounding) Value-Added Product (VAP) transforms sounding data into continuous daily files on a fixed time-height grid, at 1-minute time resolution, on 332 levels, from the surface up to a limit of approximately 40 km. The grid extends that high so the full height of soundings can be captured; however, most soundings terminate at an altitude between 25more » and 30 km, above which no data is provided. Between soundings, the VAP linearly interpolates atmospheric state variables in time for each height level. In addition, INTERPOLATEDSONDE provides relative humidity scaled to microwave radiometer (MWR) observations.« less
Zeki Al Hazzouri, Adina; Vittinghoff, Eric; Byers, Amy; Covinsky, Ken; Blazer, Dan; Diem, Susan; Ensrud, Kristine E; Yaffe, Kristine
2014-05-01
Depressive symptoms and cognitive outcomes are strongly interrelated. Despite that rates of depressive symptoms fluctuate during late life, little is known about the impact of long-term cumulative depressive symptom burden on cognitive decline and dementia in older adults. This study examines the association of nearly 20 years of cumulative depressive symptoms with cognitive outcomes in a cohort of older women. We assessed depressive symptoms in 7,240 women using the Geriatric Depression scale (GDS) at serial visits. We used a Poisson model with random slopes to estimate GDS trajectories for each participant from baseline to death or end of follow-up, and then characterized depressive symptom burden by quartile of the area under the curve. We assessed cognitive outcomes using repeated measures of the Mini-Mental State Examination (MMSE) and Trails B score over 20 years, Year-20 neuropsychological test battery, and adjudicated dementia and mild cognitive impairment (MCI). Adjusting for potential confounders, compared with women in the lowest quartile of cumulative depressive symptoms burden, women in the highest quartile had 21% more MMSE errors over time (95% CI = 17%, 26%), 20% worse Trails B score over time (95% CI = 17%, 23%), worse scores on most of the Year-20 cognitive tests, and a twofold greater likelihood of developing dementia or MCI (95% CI = 1.48, 3.11). Long-term cumulative depressive symptom burden was associated with cognitive decline and risk of dementia or MCI. Older adults with a history of depression should be closely monitored for recurrent episodes or unresolved depressive symptoms as well as any cognitive deficits.
Cumulative stress and maternal prenatal corticotropin-releasing hormone in an urban U.S. cohort.
Tse, Alison C; Rich-Edwards, Janet W; Koenen, Karestan; Wright, Rosalind J
2012-07-01
To date, there have been conflicting reports of the association of psychosocial stressors with prenatal corticotropin-releasing hormone (CRH) levels. We examined whether racial discrimination, community violence, interpersonal violence (IPV), negative life events, considered independently, and as a composite measure of cumulative stress, were associated with prenatal CRH levels in the Asthma Coalition on Community, Environment, and Social Stress (ACCESS) project, a multiethnic pre-birth cohort in urban Boston. Blood was collected between 20 and 37 weeks gestation (Mean=28.1, SD=4.6 weeks gestation). During pregnancy, women were administered the Conflict Tactics Scale survey to assess IPV, the Crisis in Family Systems-Revised survey to assess negative life events, the My Exposure to Violence survey to assess community violence, and the Experiences of Discrimination survey. A cumulative stress measure was derived from these instruments to characterize exposure to high levels of multiple stressors. None of the individual stressors or cumulative stress was associated with CRH in combined analyses including Whites (n=20), Blacks (n=46), and Hispanics (n=110). In separate analyses of Blacks and Hispanics, racial discrimination, community violence, and cumulative stress were associated with CRH in Blacks, but were not associated with CRH in Hispanics. Though these results require replication, they suggest that the effects of stress on prenatal CRH levels may be mediated by factors that differ between racial/ethnic groups. Further studies in larger samples are warranted to clarify whether associations of chronic stressors and prenatal CRH levels differ by race/ethnicity and to better understand underlying mechanisms. Copyright © 2011 Elsevier Ltd. All rights reserved.
Lead in teeth from lead-dosed goats: Microdistribution and relationship to the cumulative lead dose
DOE Office of Scientific and Technical Information (OSTI.GOV)
Bellis, David J.; Hetter, Katherine M.; Jones, Joseph
2008-01-15
Teeth are commonly used as a biomarker of long-term lead exposure. There appear to be few data, however, on the content or distribution of lead in teeth where data on specific lead intake (dose) are also available. This study describes the analysis of a convenience sample of teeth from animals that were dosed with lead for other purposes, i.e., a proficiency testing program for blood lead. Lead concentration of whole teeth obtained from 23 animals, as determined by atomic absorption spectrometry, varied from 0.6 to 80 {mu}g g{sup -1}. Linear regression of whole tooth lead ({mu}g g{sup -1}) on themore » cumulative lead dose received by the animal (g) yielded a slope of 1.2, with r{sup 2}=0.647 (p<0.0001). Laser ablation inductively coupled plasma mass spectrometry was employed to determine lead content at micrometer scale spatial resolution in the teeth of seven goats representing the dosing range. Highly localized concentrations of lead, ranging from about 10 to 2000 {mu}g g{sup -1}, were found in circumpulpal dentine. Linear regression of circumpulpal lead ({mu}g g{sup -1}) on cumulative lead dose (g) yielded a slope of 23 with r{sup 2}=0.961 (p=0.0001). The data indicated that whole tooth lead, and especially circumpulpal lead, of dosed goats increased linearly with cumulative lead exposure. These data suggest that circumpulpal dentine is a better biomarker of cumulative lead exposure than is whole tooth lead, at least for lead-dosed goats.« less
Inventory of File nam.t00z.hawaiinest.hiresf06.tm00.gr
Water Equivalent [kg/m^2/s] 628 surface NCPCP 3-6 hour acc Large-Scale Precipitation (non-convective [non-dim] 010 1 hybrid level HGT 6 hour fcst Geopotential Height [gpm] 011 1 hybrid level TMP 6 hour [non-dim] 056 50 mb HGT 6 hour fcst Geopotential Height [gpm] 057 50 mb TMP 6 hour fcst Temperature [K
Inventory of File nam.t00z.firewxnest.hiresf06.tm00.gr
Water Equivalent [kg/m^2/s] 628 surface NCPCP 5-6 hour acc Large-Scale Precipitation (non-convective [non-dim] 010 1 hybrid level HGT 6 hour fcst Geopotential Height [gpm] 011 1 hybrid level TMP 6 hour [non-dim] 056 50 mb HGT 6 hour fcst Geopotential Height [gpm] 057 50 mb TMP 6 hour fcst Temperature [K
Inventory of File nam.t00z.alaskanest.hiresf06.tm00.gr
Water Equivalent [kg/m^2/s] 628 surface NCPCP 3-6 hour acc Large-Scale Precipitation (non-convective [non-dim] 010 1 hybrid level HGT 6 hour fcst Geopotential Height [gpm] 011 1 hybrid level TMP 6 hour [non-dim] 056 50 mb HGT 6 hour fcst Geopotential Height [gpm] 057 50 mb TMP 6 hour fcst Temperature [K
Inventory of File nam.t00z.conusnest.hiresf06.tm00.gri
Water Equivalent [kg/m^2/s] 628 surface NCPCP 3-6 hour acc Large-Scale Precipitation (non-convective [non-dim] 010 1 hybrid level HGT 6 hour fcst Geopotential Height [gpm] 011 1 hybrid level TMP 6 hour [non-dim] 056 50 mb HGT 6 hour fcst Geopotential Height [gpm] 057 50 mb TMP 6 hour fcst Temperature [K
NASA Technical Reports Server (NTRS)
Knudsen, W. C.; Miller, K. L.; Spenner, K.; Novak, V.; Whitten, R. C.; Spreiter, J. R.
1979-01-01
Pioneer Venus in situ measurements of thermal plasma quantities were obtained by a retarding potential analyzer. Evidence for significant solar wind heating of the ionosphere and indications that the ionosphere is close to diffusive equilibrium are reported. Information on ionopause height, the ionospheric particle pressures at the ionopause, and the measured ratio of ionospheric scale height to ionopause ratio is presented.
David Gwenzi; Eileen Helmer; Xiaolin Zhu; Michael Lefsky; Humfredo Marcano-Vega
2017-01-01
Remotely-sensed estimates of forest biomass are usually based on various measurements of canopy height, area, volume or texture, as derived from LiDAR, radar or fine spatial resolution imagery. These measurements are then calibrated to estimates of stand biomass that are primarily based on tree stem diameters. Although humid tropical...
Avalanches and scaling collapse in the large-N Kuramoto model
NASA Astrophysics Data System (ADS)
Coleman, J. Patrick; Dahmen, Karin A.; Weaver, Richard L.
2018-04-01
We study avalanches in the Kuramoto model, defined as excursions of the order parameter due to ephemeral episodes of synchronization. We present scaling collapses of the avalanche sizes, durations, heights, and temporal profiles, extracting scaling exponents, exponent relations, and scaling functions that are shown to be consistent with the scaling behavior of the power spectrum, a quantity independent of our particular definition of an avalanche. A comprehensive scaling picture of the noise in the subcritical finite-N Kuramoto model is developed, linking this undriven system to a larger class of driven avalanching systems.
Cold dark matter and degree-scale cosmic microwave background anisotropy statistics after COBE
NASA Technical Reports Server (NTRS)
Gorski, Krzysztof M.; Stompor, Radoslaw; Juszkiewicz, Roman
1993-01-01
We conduct a Monte Carlo simulation of the cosmic microwave background (CMB) anisotropy in the UCSB South Pole 1991 degree-scale experiment. We examine cold dark matter cosmology with large-scale structure seeded by the Harrison-Zel'dovich hierarchy of Gaussian-distributed primordial inhomogeneities normalized to the COBE-DMR measurement of large-angle CMB anisotropy. We find it statistically implausible (in the sense of low cumulative probability F lower than 5 percent, of not measuring a cosmological delta-T/T signal) that the degree-scale cosmological CMB anisotropy predicted in such models could have escaped a detection at the level of sensitivity achieved in the South Pole 1991 experiment.
Integrating wetland connectivity into models for watershed ...
Geographically isolated wetlands (GIW), or wetlands embedded in uplands, exist along a spatial and temporal hydrologic connectivity continuum to downstream waters. Via these connections and disconnections, GIWs provide numerous hydrological, biogeochemical, and biological functions linked to human health and watershed-scale ecosystem services. Often, a clear demonstration of these functions and the individual and cumulative effects of GIWs on downstream waters is required for their protection or restoration. Measurements alone are typically too resource intensive to do this. In this presentation, we discuss the use of various modeling approaches to quantify the hydrologic connectivity of GIWs and their associated watershed-scale cumulative effects. Our goal is to improve the science behind understanding the functions and connectivity of GIWs via models that are complemented with various types of novel data. We synthesize what is meant by GIW connectivity and its broad significance to science and decision-making. We further discuss case studies that provide insights to diverse modeling approaches, with varying levels of complexity, for how to estimate GIW connectivity and associated watershed-scale impacts to hydrology. We finally provide insights to the key opportunities and priorities for integrating GIW connectivity into the next generation of models. Geographically isolated wetlands (GIW), or wetlands embedded in uplands, exist along a spatial and temporal h
Herscovitch, J; Broughton, R
1981-01-01
The sensitivity of the Stanford Sleepiness Scale (SSS) to short-term cumulative partial sleep deprivation (PSD) and subsequent recovery oversleeping was examined. A repeated-measures design included 7 paid healthy undergraduate volunteers, who were normal sleepers (mean sleep time 7.6 hr), and consisted of the following schedule: (a) pre-baseline; (b)sleep reduction of 40% of 1 night (mean, 4.6 hr) for 5 nights; (c) recovery oversleeping for night 1 (mean, 10.6 Hr) and night 2 (mean, 9.1 hr); (d) post-baseline. Daytime performance testing utilized a 1 hr auditory vigilance task and four short-duration (10 min) tests, two of which have been shown sensitive to total and partial sleep loss effects. Subjects completed SSS forms every min while awake and 1-9 scales of mood and energy upon awakening. Subjective measures were analyzed across conditions for mean all-day and task-related SSS values and mood and energy ratings. A correlational analysis investigated individual correspondences between ratings and performance. Results indicate that SSS is sensitive to deficits in alertness following PSD. However, it generally does not predict individual performance efficiency and therefore cannot act as a substitute for performance measures in studies involving chronic sleep loss.
Deriving Temporal Height Information for Maize Breeding
NASA Astrophysics Data System (ADS)
Malambo, L.; Popescu, S. C.; Murray, S.; Sheridan, R.; Richardson, G.; Putman, E.
2016-12-01
Phenotypic data such as height provide useful information to crop breeders to better understand their field experiments and associated field variability. However, the measurement of crop height in many breeding programs is done manually which demands significant effort and time and does not scale well when large field experiments are involved. Through structure from motion (SfM) techniques, small unmanned aerial vehicles (sUAV) or drones offer tremendous potential for generating crop height data and other morphological data such as canopy area and biomass in cost-effective and efficient way. We present results of an on-going UAV application project aimed at generating temporal height metrics for maize breeding at the Texas A&M AgriLife Research farm in Burleson County, Texas. We outline the activities involved from the drone aerial surveys, image processing and generation of crop height metrics. The experimental period ran from April (planting) through August (harvest) 2016 and involved 36 maize hybrids replicated over 288 plots ( 1.7 Ha). During the time, crop heights were manually measured per plot at weekly intervals. Corresponding aerial flights were carried out using a DJI Phantom 3 Professional UAV at each interval and images captured processed into point clouds and image mosaics using Pix4D (Pix4D SA; Lausanne, Switzerland) software. LiDAR data was also captured at two intervals (05/06 and 07/29) to provide another source of height information. To obtain height data per plot from SfM point clouds and LiDAR data, percentile height metrics were then generated using FUSION software. Results of the comparison between SfM and field measurement height show high correlation (R2 > 0.7), showing that use of sUAV can replace laborious manual height measurement and enhance plant breeding programs. Similar results were also obtained from the comparison of SfM and LiDAR heights. Outputs of this project are helping plant breeders at Texas A&M automate routine height measurements in maize and quickly make actionable decisions and discover new hybrids.
Severity of Carpal Tunnel Syndrome and Diagnostic Accuracy of Hand and Body Anthropometric Measures
Mondelli, Mauro; Farioli, Andrea; Mattioli, Stefano; Aretini, Alessandro; Ginanneschi, Federica; Greco, Giuseppe; Curti, Stefania
2016-01-01
Objective To study the diagnostic properties of hand/wrist and body measures according to validated clinical and electrophysiological carpal tunnel syndrome (CTS) severity scales. Methods We performed a prospective case-control study. For each case, two controls were enrolled. Two five-stage clinical and electrophysiological scales were used to evaluate CTS severity. Anthropometric measurements were collected and obesity indicators and hand/wrist ratios were calculated. Area under the receiver operating characteristic curves (AUC), sensitivity, specificity, and likelihood ratios were calculated separately by gender. Results We consecutively enrolled 370 cases and 747 controls. The wrist-palm ratio, waist-hip-height ratio and waist-stature ratio showed the highest proportion of cases with abnormal values in the severe stages of CTS for clinical and electrophysiological severity scales in both genders. Accuracy tended to increase with CTS severity for females and males. In severe stage, most of the indexes presented moderate accuracy in both genders. Among subjects with severe CTS, the wrist-palm ratio presented the highest AUC for hand measures in the clinical and electrophysiological severity scales both in females (AUC 0.83 and 0.76, respectively) and males (AUC 0.91 and 0.82, respectively). Among subjects with severe CTS, the waist-stature ratio showed the highest AUC for body measures in the clinical and electrophysiological severity scales both in females (AUC 0.78 and 0.77, respectively) and males (AUC 0.84 and 0.76, respectively). The results of waist-hip-height ratio AUC were similar. Conclusions Wrist-palm ratio, waist-hip-height ratio and waist-stature ratio could contribute to support the diagnostic hypothesis of severe CTS that however has to be confirmed by nerve conduction study. PMID:27768728
Penetrance of Polygenic Obesity Susceptibility Loci across the Body Mass Index Distribution.
Abadi, Arkan; Alyass, Akram; Robiou du Pont, Sebastien; Bolker, Ben; Singh, Pardeep; Mohan, Viswanathan; Diaz, Rafael; Engert, James C; Yusuf, Salim; Gerstein, Hertzel C; Anand, Sonia S; Meyre, David
2017-12-07
A growing number of single-nucleotide polymorphisms (SNPs) have been associated with body mass index (BMI) and obesity, but whether the effects of these obesity-susceptibility loci are uniform across the BMI distribution remains unclear. We studied the effects of 37 BMI-associated SNPs in 75,230 adults of European ancestry across BMI percentiles by using conditional quantile regression (CQR) and meta-regression (MR) models. The effects of nine SNPs (24%)-rs1421085 (FTO; p = 8.69 × 10 -15 ), rs6235 (PCSK1; p = 7.11 × 10 -6 ), rs7903146 (TCF7L2; p = 9.60 × 10 -6 ), rs11873305 (MC4R; p = 5.08 × 10 -5 ), rs12617233 (FANCL; p = 5.30 × 10 -5 ), rs11672660 (GIPR; p = 1.64 × 10 -4 ), rs997295 (MAP2K5; p = 3.25 × 10 -4 ), rs6499653 (FTO; p = 6.23 × 10 -4 ), and rs3824755 (NT5C2; p = 7.90 × 10 -4 )-increased significantly across the sample BMI distribution. We showed that such increases stemmed from unadjusted gene interactions that enhanced the effects of SNPs in persons with a high BMI. When 125 height-associated SNPs were analyzed for comparison, only one (<1%), rs6219 (IGF1, p = 1.80 × 10 -4 ), showed effects that varied significantly across height percentiles. Cumulative gene scores of these SNPs (GS-BMI and GS-height) showed that only GS-BMI had effects that increased significantly across the sample distribution (BMI: p = 7.03 × 10 -37 ; height: p = 0.499). Overall, these findings underscore the importance of gene-gene and gene-environment interactions in shaping the genetic architecture of BMI and advance a method for detecting such interactions by using only the sample outcome distribution. Copyright © 2017 American Society of Human Genetics. Published by Elsevier Inc. All rights reserved.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Venezian, G.; Bretschneider, C.L.
1980-08-01
This volume details a new methodology to analyze statistically the forces experienced by a structure at sea. Conventionally a wave climate is defined using a spectral function. The wave climate is described using a joint distribution of wave heights and periods (wave lengths), characterizing actual sea conditions through some measured or estimated parameters like the significant wave height, maximum spectral density, etc. Random wave heights and periods satisfying the joint distribution are then generated. Wave kinetics are obtained using linear or non-linear theory. In the case of currents a linear wave-current interaction theory of Venezian (1979) is used. The peakmore » force experienced by the structure for each individual wave is identified. Finally, the probability of exceedance of any given peak force on the structure may be obtained. A three-parameter Longuet-Higgins type joint distribution of wave heights and periods is discussed in detail. This joint distribution was used to model sea conditions at four potential OTEC locations. A uniform cylindrical pipe of 3 m diameter, extending to a depth of 550 m was used as a sample structure. Wave-current interactions were included and forces computed using Morison's equation. The drag and virtual mass coefficients were interpolated from published data. A Fortran program CUFOR was written to execute the above procedure. Tabulated and graphic results of peak forces experienced by the structure, for each location, are presented. A listing of CUFOR is included. Considerable flexibility of structural definition has been incorporated. The program can easily be modified in the case of an alternative joint distribution or for inclusion of effects like non-linearity of waves, transverse forces and diffraction.« less
Predictions and Observations of Munitions Burial Under Intense Storm Waves at Duck, NC
NASA Astrophysics Data System (ADS)
Calantoni, J.; Klammer, H.; Sheremet, A.
2017-12-01
The fate of munitions or unexploded ordnance (UXO) resting on a submarine sediment bed is a critical safety concern. Munitions may remain in place or completely disappear for significant but unknown periods, after becoming buried in the sediment bed. Clearly, burial of munitions drastically complicates the detection and removal of potential threats. Here, we present field data of wave height and surrogate munitions burial depths near the 8-m isobath at the U.S. Army Corps of Engineers, Field Research Facility, Duck, North Carolina, observed between January and March 2015. The experiment captured a remarkable sequence of storms that included at least 10 events, of which 6 were characterized by wave fields of significant heights exceeding 2 m and with peak periods of approximately 10 s. During the strongest storm, waves of 14 s period and heights exceeding 2 m were recorded for more than 3 days; significant wave height reached 5 m at the peak of activity. At the end of the experiment, divers measured munition burial depths of up to 60 cm below the seabed level. However, the local bathymetry showed less than 5 cm variation between the before and after-storm states, suggesting the local net sediment accumulation / loss was negligible. The lack of bathymetric variability strongly suggests that the munitions sank into the bed, which would suggest an extreme state of sand agitation during the storm. We explore existing analytical solutions for the dynamic interaction between waves and sediment to predict munitions burial depths. Measured time series of wave pressure near the sediment bed were converted into wave-induced changes in pore pressures and the effective stress states of the sediment. Different sediment failure criteria based on minimum normal and maximum shear stresses were then applied to evaluate the appropriateness of individual failure criteria to predict observed burial depths. Results are subjected to a sensitivity analysis with respect to uncertain sediment parameters and summarized by representing cumulative failure times as a function of depth.
Thick Disks in the Hubble Space Telescope Frontier Fields
DOE Office of Scientific and Technical Information (OSTI.GOV)
Elmegreen, Bruce G.; Elmegreen, Debra Meloy; Tompkins, Brittany
Thick disk evolution is studied using edge-on galaxies in two Hubble Space Telescope Frontier Field Parallels. The galaxies were separated into 72 clumpy types and 35 spiral types with bulges. Perpendicular light profiles in F435W, F606W, and F814W ( B , V , and I ) passbands were measured at 1 pixel intervals along the major axes and fitted to sech{sup 2} functions convolved with the instrument line spread function (LSF). The LSF was determined from the average point spread function of ∼20 stars in each passband and field, convolved with a line of uniform brightness to simulate disk blurring.more » A spread function for a clumpy disk was also used for comparison. The resulting scale heights were found to be proportional to galactic mass, with the average height for a 10{sup 10±0.5} M {sub ⊙} galaxy at z = 2 ± 0.5 equal to 0.63 ± 0.24 kpc. This value is probably the result of a blend between thin and thick disk components that cannot be resolved. Evidence for such two-component structure is present in an inverse correlation between height and midplane surface brightness. Models suggest that the thick disk is observed best between the clumps, and there the average scale height is 1.06 ± 0.43 kpc for the same mass and redshift. A 0.63 ± 0.68 mag V − I color differential with height is also evidence for a mixture of thin and thick components.« less
Variable order fractional Fokker-Planck equations derived from Continuous Time Random Walks
NASA Astrophysics Data System (ADS)
Straka, Peter
2018-08-01
Continuous Time Random Walk models (CTRW) of anomalous diffusion are studied, where the anomalous exponent β(x) ∈(0 , 1) varies in space. This type of situation occurs e.g. in biophysics, where the density of the intracellular matrix varies throughout a cell. Scaling limits of CTRWs are known to have probability distributions which solve fractional Fokker-Planck type equations (FFPE). This correspondence between stochastic processes and FFPE solutions has many useful extensions e.g. to nonlinear particle interactions and reactions, but has not yet been sufficiently developed for FFPEs of the "variable order" type with non-constant β(x) . In this article, variable order FFPEs (VOFFPE) are derived from scaling limits of CTRWs. The key mathematical tool is the 1-1 correspondence of a CTRW scaling limit to a bivariate Langevin process, which tracks the cumulative sum of jumps in one component and the cumulative sum of waiting times in the other. The spatially varying anomalous exponent is modelled by spatially varying β(x) -stable Lévy noise in the waiting time component. The VOFFPE displays a spatially heterogeneous temporal scaling behaviour, with generalized diffusivity and drift coefficients whose units are length2/timeβ(x) resp. length/timeβ(x). A global change of the time scale results in a spatially varying change in diffusivity and drift. A consequence of the mathematical derivation of a VOFFPE from CTRW limits in this article is that a solution of a VOFFPE can be approximated via Monte Carlo simulations. Based on such simulations, we are able to confirm that the VOFFPE is consistent under a change of the global time scale.
Socioeconomic development and secular trend in height in China.
Zong, Xin-Nan; Li, Hui; Wu, Hua-Hong; Zhang, Ya-Qin
2015-12-01
The objective of this study was to examine the effect of socioeconomic development on secular trend in height among children and adolescents in China. Body height and spermarcheal/menarcheal ages were obtained from two periodic large-scale national representative surveys in China between 1975 and 2010. Chinese socioeconomic development indicators were obtained from the United Nations world population prospects. The effects of plausible determinants were assessed by partial least-squares regression. The average height of children and adolescents improved in tandem with socioeconomic development, without any tendency to plateau. The increment of height trend presented larger around puberty than earlier or later ages. The partial least-squares regressions with gross national income, life expectancy and spermarcheal/menarcheal age accounted for increment of height trend from 88.3% to 98.3% for males and from 82.9% to 97.3% for females in adolescence. Further, through the analysis of the variable importance for projection, the contributions of gross national income and life expectancy on height increment were confirmed to be significant in childhood and adolescence, and the contribution of spermarcheal/menarcheal age was superior to both of them in adolescence. We concluded that positive secular trend in height in China was significantly associated with socioeconomic status (GNI as indicator) and medical and health conditions (life expectancy as indicator). Earlier onset of spermarche and menarche proved to be an important role in larger increment of the trend over time of height at puberty for a population. Copyright © 2015 Elsevier B.V. All rights reserved.
Factors related to northern goshawk landscape use in the western Great Lakes region
Bruggeman, Jason E.; Andersen, David E.; Woodford, James E.
2014-01-01
Northern Goshawks (Accipiter gentilis) are a species of special conservation concern in the western Great Lakes bioregion and elsewhere in North America, and exhibit landscape-scale spatial use patterns. However, little information exists about Northern Goshawk habitat relations at broad spatial extents, as most existing published information comes from a few locations of relatively small spatial extent and, in some cases, short durations. We used an information-theoretic approach to evaluate competing hypotheses regarding factors (forest canopy cover, successional stage, and heights of the canopy top and base) related to odds of Northern Goshawk landscape use throughout the western Great Lakes bioregion based on an occupancy survey completed in 2008 (Bruggeman et al. 2011). We also combined these data with historical data of Northern Goshawk nest locations in the bioregion from 1979–2006 to evaluate the same competing hypotheses to elucidate long-term trends in use. The odds of Northern Goshawk use in 2008, and from 1979–2008, were positively correlated with average percent canopy cover. In the best-approximating models developed using 1979–2008 data, the odds of landscape use were positively correlated with the percentages of the landscape having canopy heights between 10 m and 25 m, and 25 m and 50 m, and the amount of variability in canopy base height. Also, the odds of landscape use were negatively correlated with the average height at the canopy base. Our results suggest multiple habitat factors were related to Northern Goshawk landscape-scale habitat use, similar to habitat use described at smaller spatial scales in the western Great Lakes bioregion and in western North America and Europe.
Human brain mass: similar body composition associations as observed across mammals.
Heymsfield, Steven B; Müller, Manfred J; Bosy-Westphal, Anja; Thomas, Diana; Shen, Wei
2012-01-01
A classic association is the link between brain mass and body mass across mammals that has now been shown to derive from fat-free mass (FFM) and not fat mass (FM). This study aimed to establish for the first time the associations between human brain mass and body composition and to compare these relations with those established for liver as a reference organ. Subjects were 112 men and 148 women who had brain and liver mass measured by magnetic resonance imaging with FM and FFM measured by dual-energy X-ray absorptiometry. Brain mass scaled to height (H) with powers of ≤0.6 in men and women; liver mass and FFM both scaled similarly as H(~2) . The fraction of FFM as brain thus scaled inversely to height (P < 0.001) while liver mass/FFM was independent of height. After controlling for age, brain, and liver mass were associated with FFM while liver was additionally associated with FM (all models P ≤ 0.01). After controlling for age and sex, FFM accounted for ~5% of the variance in brain mass while levels were substantially higher for liver mass (~60%). Brain mass was significantly larger (P < 0.001) in men than in women, even after controlling for age and FFM. As across mammals, human brain mass associates significantly, although weakly, with FFM and not FM; the fraction of FFM as brain relates inversely to height; brain differs in these relations from liver, another small high metabolic rate organ; and the sexual dimorphism in brain mass persists even after adjusting for age and FFM. Copyright © 2012 Wiley Periodicals, Inc.
[Optimization of isolation of the concentrate of stem cells from the umbilical blood].
Tiumina, O V; Savchenko, V G; Gusarova, G I; Pavlov, V V; Zharkov, M N; Volchkov, S E; Rossiev, V A; Gridasov, G N
2005-01-01
To study correlations between body mass and height of the newborn, Apgar scale estimates, gestation time, volume of the obtained umbilical blood (UB), number of nucleated cells (NC); to compare manual and automatic modes of UB processing. 330 procurements of UB were made, 230 (69.7%) samples were frozen. Comparison of 2 techniques of UB processing was made in 73 cases of double centrifugation with hydroxyethylstarch (HES) and 47 cases of using separator Sepax (Biosafe, Switzerland). Blood cell count before and after UB processing and number of CD34+ cells were estimated. A correlation analysis was made of dependence of the volume of 102 samples of UB on the weight (r = 0.268, p < 0.01) and height of the fetus (r = 0.203, p < 0.05), estimation by Apgar scale (r = -0.092, p < 0.1) and gestation term (r = -0.003, p > 0.1); analysis of the number of NC dependence on the volume of UB (r = 0.102 p < 0.1), mass (r = 0.073 p > 0.1) and fetus height (r = 0.121 p > 0.1), gestation time (r = 0.159 p > 0.1), Apgar scale assessment (r = -0.174 p > 0.1). In manual UB management NC yield made up 71.9 +/- 6.7%, in automatic--81 +/- 8.0% (p < 0.05). Percent of erythrocytes removal was 73 +/- 5.7% and 80.5 +/- 6.1% (p < 0.05), respectively. A weak correlation was found between UB volume, mass and height of the fetus. The number of NC in UB depends on none of the parameters. Automatic processing of UB provides a greater release of NC and better elimination of erythrocytes in minimal risk of contamination.
Scale Properties of Anisotropic and Isotropic Turbulence in the Urban Surface Layer
NASA Astrophysics Data System (ADS)
Liu, Hao; Yuan, Renmin; Mei, Jie; Sun, Jianning; Liu, Qi; Wang, Yu
2017-11-01
The scale properties of anisotropic and isotropic turbulence in the urban surface layer are investigated. A dimensionless anisotropic tensor is introduced and the turbulent tensor anisotropic coefficient, defined as C, where C = 3d3 + 1 (d3 is the minimum eigenvalue of the tensor) is used to characterize the turbulence anisotropy or isotropy. Turbulence is isotropic when C ≈ 1, and anisotropic when C ≪ 1. Three-dimensional velocity data collected using a sonic anemometer are analyzed to obtain the anisotropic characteristics of atmospheric turbulence in the urban surface layer, and the tensor anisotropic coefficient of turbulent eddies at different spatial scales calculated. The analysis shows that C is strongly dependent on atmospheric stability ξ = (z-zd)/L_{{it{MO}}}, where z is the measurement height, zd is the displacement height, and L_{{it{MO}}} is the Obukhov length. The turbulence at a specific scale in unstable conditions (i.e., ξ < 0) is closer to isotropic than that at the same scale under stable conditions. The maximum isotropic scale of turbulence is determined based on the characteristics of the power spectrum in three directions. Turbulence does not behave isotropically when the eddy scale is greater than the maximum isotropic scale, whereas it is horizontally isotropic at relatively large scales. The maximum isotropic scale of turbulence is compared to the outer scale of temperature, which is obtained by fitting the temperature fluctuation spectrum using the von Karman turbulent model. The results show that the outer scale of temperature is greater than the maximum isotropic scale of turbulence.
NASA Technical Reports Server (NTRS)
2007-01-01
Topics include: Program Merges SAR Data on Terrain and Vegetation Heights; Using G(exp 4)FETs as a Data Router for In-Plane Crossing of Signal Paths; Two Algorithms for Processing Electronic Nose Data; Radiation-Tolerant Dual Data Bus; General-Purpose Front End for Real-Time Data Processing; Nanocomposite Photoelectrochemical Cells; Ultracapacitor-Powered Cordless Drill, Cumulative Timers for Microprocessors; Photocatalytic/Magnetic Composite Particles; Separation and Sealing of a Sample Container Using Brazing; Automated Aerial Refueling Hitches a Ride on AFF; Cobra Probes Containing Replaceable Thermocouples; High-Speed Noninvasive Eye-Tracking System; Detergent-Specific Membrane Protein Crystallization Screens; Evaporation-Cooled Protective Suits for Firefighters; Plasmonic Antenna Coupling for QWIPs; Electronic Tongue Containing Redox and Conductivity Sensors; Improved Heat-Stress Algorithm; A Method of Partly Automated Testing of Software; Rover Wheel-Actuated Tool Interface; and Second-Generation Electronic Nose.
Magma oceanography. I - Thermal evolution. [of lunar surface
NASA Technical Reports Server (NTRS)
Solomon, S. C.; Longhi, J.
1977-01-01
Fractional crystallization and flotation of cumulate plagioclase in a cooling 'magma ocean' provides the simplest explanation for early emplacement of a thick feldspar-rich lunar crust. The complementary mafic cumulates resulting from the differentiation of such a magma ocean have been identified as the ultimate source of mare basalt liquids on the basis or rare-earth abundance patterns and experimental petrology studies. A study is conducted concerning the thermal evolution of the early differentiation processes. A range of models of increasing sophistication are considered. The models developed contain the essence of the energetics and the time scale for magma ocean differentiation. Attention is given to constraints on a magma ocean, modeling procedures, single-component magma oceans, fractionating magma oceans, and evolving magma oceans.
Pteropods on the edge: Cumulative effects of ocean acidification, warming, and deoxygenation
NASA Astrophysics Data System (ADS)
Bednaršek, Nina; Harvey, Chris J.; Kaplan, Isaac C.; Feely, Richard A.; Možina, Jasna
2016-06-01
We review the state of knowledge of the individual and community responses of euthecosome (shelled) pteropods in the context of global environmental change. In particular, we focus on their responses to ocean acidification, in combination with ocean warming and ocean deoxygenation, as inferred from a growing body of empirical literature, and their relatively nascent place in ecosystem-scale models. Our objectives are: (1) to summarize the threats that these stressors pose to pteropod populations; (2) to demonstrate that pteropods are strong candidate indicators for cumulative effects of OA, warming, and deoxygenation in marine ecosystems; and (3) to provide insight on incorporating pteropods into population and ecosystem models, which will help inform ecosystem-based management of marine resources under future environmental regimes.
Gravity wave forcing in the middle atmosphere due to reduced ozone heating during a solar eclipse
NASA Technical Reports Server (NTRS)
Fritts, David C.; Luo, Zhangai
1993-01-01
We present an analysis of the gravity wave structure and the associated forcing of the middle atmosphere induced by the screening of the ozone layer from solar heating during a solar eclipse. Fourier integral techniques and numerical evaluation of the integral solutions were used to assess the wave field structure and to compute the gravity wave forcing of the atmosphere at greater heights. Our solutions reveal dominant periods of a few hours, characteristic horizontal and vertical scales of about 5000 to 10,000 km and 200 km, respectively, and an integrated momentum flux in the direction of eclipse motion of about 5.6 x 10 exp 8 N at each height above the forcing level. These results suggest that responses to solar eclipses may be difficult to detect above background gravity wave and tidal fluctuations until well into the thermosphere. Conversely, the induced body forces may penetrate to considerable heights because of the large wave scales and will have significant effects at levels where the wave field is dissipated.
Footprint Map Partitioning Using Airborne Laser Scanning Data
NASA Astrophysics Data System (ADS)
Xiong, B.; Oude Elberink, S.; Vosselman, G.
2016-06-01
Nowadays many cities and countries are creating their 3D building models for a better daily management and smarter decision making. The newly created 3D models are required to be consistent with existing 2D footprint maps. Thereby the 2D maps are usually combined with height data for the task of 3D reconstruction. Many buildings are often composed by parts that are discontinuous over height. Building parts can be reconstructed independently and combined into a complete building. Therefore, most of the state-of-the-art work on 3D building reconstruction first decomposes a footprint map into parts. However, those works usually change the footprint maps for easier partitioning and cannot detect building parts that are fully inside the footprint polygon. In order to solve those problems, we introduce two methodologies, one more dependent on height data, and the other one more dependent on footprints. We also experimentally evaluate the two methodologies and compare their advantages and disadvantages. The experiments use Airborne Laser Scanning (ALS) data and two vector maps, one with 1:10,000 scale and another one with 1:500 scale.
Integrating social, economic, and ecological values across large landscapes
Jessica E. Halofsky; Megan K. Creutzburg; Miles A. Hemstrom
2014-01-01
The Integrated Landscape Assessment Project (ILAP) was a multiyear effort to produce information, maps, and models to help land managers, policymakers, and others conduct mid- to broad-scale (e.g., watersheds to states and larger areas) prioritization of land management actions, perform landscape assessments, and estimate cumulative effects of management actions for...
Over the past three decades, a number of researchers in the fields of environmental justice (EJ) and environmental public health have highlighted the existence of regional and local scale differences in exposure to air pollution, as well as calculated health risk and impacts of a...
Erosion, sedimentation, and cumulative effects in the Northern Rocky Mountains
Walter F. Megahan; John G. King
2004-01-01
Erosion and sedimentation are natural geomorphic processes characterized by large temporal and spatial variability. Recent radionuclide studies suggest that rare episodic events, such as large wildfires, produce massive sediment yields over time scales of thousands of years, thereby causing long-term average sediment production to exceed present-day average erosion...
ERIC Educational Resources Information Center
Alles, David L.
2005-01-01
The nature of evolution, the historical change in the universe, and the change that is caused by the workings of the dynamic processes at the smallest and largest scales are studied. It is viewed that the cumulative change in the historical systems is caused by evolution, which is a type of causal relationship and evolutionary processes could be…
Lumped Parameter Models for Predicting Nitrogen Transport in Lower Coastal Plain Watersheds
Devendra M. Amatya; George M. Chescheir; Glen P. Fernandez; R. Wayne Skaggs; F. Birgand; J.W. Gilliam
2003-01-01
hl recent years physically based comprehensive disfributed watershed scale hydrologic/water quality models have been developed and applied 10 evaluate cumulative effects of land arld water management practices on receiving waters, Although fhesc complex physically based models are capable of simulating the impacts ofthese changes in large watersheds, they are often...
Large-Scale Economic Change and Youth Development: The Case of Urban China
ERIC Educational Resources Information Center
Yoshikawa, Hirokazu; Way, Niobe; Chen, Xinyin
2012-01-01
Social ecological and dynamic systems theories propose that human development is shaped by the cumulative impact of social interactions in proximal and distal settings, which are themselves influenced by social and economic forces. The understanding of the links between microsystem-level factors (such as parenting styles and parent-child…
ERIC Educational Resources Information Center
Spaights, Ernest; And Others
1987-01-01
Investigated relationship among nonacademic factors and retention of Black students at predominantly White universities. Examined assertiveness as measured by the College Self Expression Scale, cumulative grade point average, and retention of 119 Black college students. While nonsignificant findings prevailed when total sample was analyzed, trends…
Persistency and Uncertainty Across the Academic Career
NASA Astrophysics Data System (ADS)
Petersen, Alexander; Riccaboni, Massimo; Stanley, H. Eugene; Pammolli, Fabio
2012-02-01
Recent shifts in the business structure of universities and a bottleneck in the supply of tenure track positions are two issues that threaten to change the longstanding patronage system in academia and affect the overall potential of science. We analyze the longitudinal publication rate ni(t) on the 1-year scale for 300 physicists i=1...300. For most careers analyzed, we observe cumulative production acceleration Ni(t) Ait^αi with αi>1, reflecting the benefits of learning and collaboration spillovers which constitute a cumulative advantage. We find that the variance in production scales with collaboration radius size Si as 2̂i˜Si^ψ with 0.4 < ψ< 0.8. We develop a preferential growth model to gain insight into the relation between career persistency and career uncertainty. This model shows that emphasis on nonstop production, a consequence of short-term contract systems, results in a significant number of ``sudden death'' careers that terminate due to unavoidable negative production shocks. Hence, short-term contracts may increase the strength of ``rich-get-richer'' mechanisms in competitive professions and hinder the upward mobility of young scientists.
NASA Astrophysics Data System (ADS)
Zhang, Dong-Hai; Chen, Yan-Ling; Wang, Guo-Rong; Li, Wang-Dong; Wang, Qing; Yao, Ji-Jie; Zhou, Jian-Guo; Zheng, Su-Hua; Xu, Li-Ling; Miao, Hui-Feng; Wang, Peng
2014-07-01
Multiplicity fluctuation of the target evaporated fragments emitted in 290 MeV/u 12C-AgBr, 400 MeV/u 12C-AgBr, 400 MeV/u 20Ne-AgBr and 500 MeV/u 56Fe-AgBr interactions is investigated using the scaled factorial moment method in two-dimensional normal phase space and cumulative variable space, respectively. It is found that in normal phase space the scaled factorial moment (ln
Fine-Scale Population Estimation by 3D Reconstruction of Urban Residential Buildings
Wang, Shixin; Tian, Ye; Zhou, Yi; Liu, Wenliang; Lin, Chenxi
2016-01-01
Fine-scale population estimation is essential in emergency response and epidemiological applications as well as urban planning and management. However, representing populations in heterogeneous urban regions with a finer resolution is a challenge. This study aims to obtain fine-scale population distribution based on 3D reconstruction of urban residential buildings with morphological operations using optical high-resolution (HR) images from the Chinese No. 3 Resources Satellite (ZY-3). Specifically, the research area was first divided into three categories when dasymetric mapping was taken into consideration. The results demonstrate that the morphological building index (MBI) yielded better results than built-up presence index (PanTex) in building detection, and the morphological shadow index (MSI) outperformed color invariant indices (CIIT) in shadow extraction and height retrieval. Building extraction and height retrieval were then combined to reconstruct 3D models and to estimate population. Final results show that this approach is effective in fine-scale population estimation, with a mean relative error of 16.46% and an overall Relative Total Absolute Error (RATE) of 0.158. This study gives significant insights into fine-scale population estimation in complicated urban landscapes, when detailed 3D information of buildings is unavailable. PMID:27775670
NASA Technical Reports Server (NTRS)
Halpern, D.; Zlotnicki, V.; Newman, J.; Brown, O.; Wentz, F.
1991-01-01
Monthly mean global distributions for 1988 are presented with a common color scale and geographical map. Distributions are included for sea surface height variation estimated from GEOSAT; surface wind speed estimated from the Special Sensor Microwave Imager on the Defense Meteorological Satellite Program spacecraft; sea surface temperature estimated from the Advanced Very High Resolution Radiometer on NOAA spacecrafts; and the Cartesian components of the 10m height wind vector computed by the European Center for Medium Range Weather Forecasting. Charts of monthly mean value, sampling distribution, and standard deviation value are displayed. Annual mean distributions are displayed.
Two antenna, two pass interferometric synthetic aperture radar
Martinez, Ana; Doerry, Armin W.; Bickel, Douglas L.
2005-06-28
A multi-antenna, multi-pass IFSAR mode utilizing data driven alignment of multiple independent passes can combine the scaling accuracy of a two-antenna, one-pass IFSAR mode with the height-noise performance of a one-antenna, two-pass IFSAR mode. A two-antenna, two-pass IFSAR mode can accurately estimate the larger antenna baseline from the data itself and reduce height-noise, allowing for more accurate information about target ground position locations and heights. The two-antenna, two-pass IFSAR mode can use coarser IFSAR data to estimate the larger antenna baseline. Multi-pass IFSAR can be extended to more than two (2) passes, thereby allowing true three-dimensional radar imaging from stand-off aircraft and satellite platforms.
Wind-invariant saltation heights imply linear scaling of aeolian saltation flux with shear stress.
Martin, Raleigh L; Kok, Jasper F
2017-06-01
Wind-driven sand transport generates atmospheric dust, forms dunes, and sculpts landscapes. However, it remains unclear how the flux of particles in aeolian saltation-the wind-driven transport of sand in hopping trajectories-scales with wind speed, largely because models do not agree on how particle speeds and trajectories change with wind shear velocity. We present comprehensive measurements, from three new field sites and three published studies, showing that characteristic saltation layer heights remain approximately constant with shear velocity, in agreement with recent wind tunnel studies. These results support the assumption of constant particle speeds in recent models predicting linear scaling of saltation flux with shear stress. In contrast, our results refute widely used older models that assume that particle speed increases with shear velocity, thereby predicting nonlinear 3/2 stress-flux scaling. This conclusion is further supported by direct field measurements of saltation flux versus shear stress. Our results thus argue for adoption of linear saltation flux laws and constant saltation trajectories for modeling saltation-driven aeolian processes on Earth, Mars, and other planetary surfaces.
Wind-invariant saltation heights imply linear scaling of aeolian saltation flux with shear stress
Martin, Raleigh L.; Kok, Jasper F.
2017-01-01
Wind-driven sand transport generates atmospheric dust, forms dunes, and sculpts landscapes. However, it remains unclear how the flux of particles in aeolian saltation—the wind-driven transport of sand in hopping trajectories—scales with wind speed, largely because models do not agree on how particle speeds and trajectories change with wind shear velocity. We present comprehensive measurements, from three new field sites and three published studies, showing that characteristic saltation layer heights remain approximately constant with shear velocity, in agreement with recent wind tunnel studies. These results support the assumption of constant particle speeds in recent models predicting linear scaling of saltation flux with shear stress. In contrast, our results refute widely used older models that assume that particle speed increases with shear velocity, thereby predicting nonlinear 3/2 stress-flux scaling. This conclusion is further supported by direct field measurements of saltation flux versus shear stress. Our results thus argue for adoption of linear saltation flux laws and constant saltation trajectories for modeling saltation-driven aeolian processes on Earth, Mars, and other planetary surfaces. PMID:28630907
A comprehensive study on urban true orthorectification
Zhou, G.; Chen, W.; Kelmelis, J.A.; Zhang, Dongxiao
2005-01-01
To provide some advanced technical bases (algorithms and procedures) and experience needed for national large-scale digital orthophoto generation and revision of the Standards for National Large-Scale City Digital Orthophoto in the National Digital Orthophoto Program (NDOP), this paper presents a comprehensive study on theories, algorithms, and methods of large-scale urban orthoimage generation. The procedures of orthorectification for digital terrain model (DTM)-based and digital building model (DBM)-based orthoimage generation and their mergence for true orthoimage generation are discussed in detail. A method of compensating for building occlusions using photogrammetric geometry is developed. The data structure needed to model urban buildings for accurately generating urban orthoimages is presented. Shadow detection and removal, the optimization of seamline for automatic mosaic, and the radiometric balance of neighbor images are discussed. Street visibility analysis, including the relationship between flight height, building height, street width, and relative location of the street to the imaging center, is analyzed for complete true orthoimage generation. The experimental results demonstrated that our method can effectively and correctly orthorectify the displacements caused by terrain and buildings in urban large-scale aerial images. ?? 2005 IEEE.
Power Scaling of Petroleum Field Sizes and Movie Box Office Earnings.
NASA Astrophysics Data System (ADS)
Haley, J. A.; Barton, C. C.
2017-12-01
The size-cumulative frequency distribution of petroleum fields has long been shown to be power scaling, Mandelbrot, 1963, and Barton and Scholz, 1995. The scaling exponents for petroleum field volumes range from 0.8 to 1.08 worldwide and are used to assess the size and number of undiscovered fields. The size-cumulative frequency distribution of movie box office earnings also exhibits a power scaling distribution for domestic, overseas, and worldwide gross box office earnings for the top 668 earning movies released between 1939 and 2016 (http://www.boxofficemojo.com/alltime/). Box office earnings were reported in the dollars-of-the-day and were converted to 2015 U.S. dollars using the U.S. consumer price index (CPI) for domestic and overseas earnings. Because overseas earnings are not reported by country and there is no single inflation index appropriate for all overseas countries. Adjusting the box office earnings using the CPI index has two effects on the power functions fit. The first is that the scaling exponent has a narrow range (2.3 - 2.5) between the three data sets; and second, the scatter of the data points fit by the power function is reduced. The scaling exponents for the adjusted value are; 2.3 for domestic box office earnings, 2.5 for overseas box office earnings, and 2.5 worldwide box office earnings. The smaller the scaling exponent the greater the proportion of all earnings is contributed by a smaller proportion of all the movies: where E = P (a-2)/(a-1) where E is the percentage of earnings, P is the percentage of all movies in the data set. The scaling exponents for box office earnings (2.3 - 2.5) means that approximately 20% of the top earning movies contribute 70-55% of all the earnings for domestic, worldwide earnings respectively.
Universality of (2+1)-dimensional restricted solid-on-solid models
NASA Astrophysics Data System (ADS)
Kelling, Jeffrey; Ódor, Géza; Gemming, Sibylle
2016-08-01
Extensive dynamical simulations of restricted solid-on-solid models in D =2 +1 dimensions have been done using parallel multisurface algorithms implemented on graphics cards. Numerical evidence is presented that these models exhibit Kardar-Parisi-Zhang surface growth scaling, irrespective of the step heights N . We show that by increasing N the corrections to scaling increase, thus smaller step-sized models describe better the asymptotic, long-wave-scaling behavior.
Ionospheric Research Using Digital Ionosondes.
1983-07-01
HEIGHT ANALYSIS, ARTIST 96 7.0 CHEMICAL RELEASE EXPERIMENTS AT NATAL 105 8.0 IONOSPHERIC HEATING EXPERIMENTS AT ARECIBO 114 9.0 DIGISONDE 128...Jan 82 20:30 to 12 AST 89 67 Thule 82-022 92 68 Integrated Height Characteristic Thule 82-022 93 69 ARTIST Ionogram Print 103 70 Automatic Profiles...Where Manual and Automatic Scalings Fall Within Indicated Limits 97 6a ARTIST Initialization 99 6b ARTIST Initialization 100 6c ARTIST Output 101 N
Southern Ocean monthly wave fields for austral winters 1985-1988 by Geosat radar altimeter
Josberger, E.G.; Mognard, N.M.
1996-01-01
Four years of monthly averaged wave height fields for the austral winters 19851988 derived from the Geosat altimeter data show a spatial variability of the scale of 500-1000 km that varies monthly and annually. This variability is superimposed on the zonal patterns surrounding the Antarctic continent and characteristic of the climatology derived from the U.S. Navy [1992] Marine Climatic Atlas of the World. The location and the intensity of these large-scale features, which are not found in the climatological fields, exhibit strong monthly and yearly variations. A global underestimation of the climatological mean wave heights by more than l m is also found over large regions of the Southern Ocean. The largest monthly averaged significant wave heights are above 5 m and are found during August of every year in the Indian Ocean, south of 40??S. The monthly wave fields show more variability in the Atlantic and Pacific Oceans than in the Indian Ocean. The Seasat data from 1978 and the Geosat data from 1985 and 1988 show an eastward rotation of the largest wave heights. However, this rotation is absent in 1986 and 1987; the former was a year of unusually low sea states, and the latter was a year of unusually high sea states, which suggests a link to the El Nin??o-Southern Oscillation event of 1986. Copyright 1996 by the American Geophysical Union.
Wind tunnel test results of a 1/8-scale fan-in-wing model
NASA Technical Reports Server (NTRS)
Wilson, John C.; Gentry, Garl L.; Gorton, Susan A.
1996-01-01
A 1/8-scale model of a fan-in-wing concept considered for development by Grumman Aerospace Corporation for the U.S. Army was tested in the Langley 14- by 22-Foot Subsonic Tunnel. Hover testing, which included height above a pressure-instrumented ground plane, angle of pitch, and angle of roll for a range of fan thrust, was conducted in a model preparation area near the tunnel. The air loads and surface pressures on the model were measured for several configurations in the model preparation area and in the tunnel. The major hover configuration change was varying the angles of the vanes attached to the exit of the fans for producing propulsive force. As the model height above the ground was decreased, there was a significant variation of thrust-removed normal force with constant fan speed. The greatest variation was generally for the height-to-fan exit diameter ratio of less than 2.5; the variation was reduced by deflecting fan exit flow outboard with the vanes. In the tunnel angles of pitch and sideslip, height above the tunnel floor, and wind speed were varied for a range of fan thrust and different vane angle configurations. Other configuration features such as flap deflections and tail incidence were evaluated as well. Though the V-tail empennage provided an increase in static longitudinal stability, the total model configuration remained unstable.
The Budget of Turbulent Kinetic Energy in the Urban Roughness Sublayer
NASA Astrophysics Data System (ADS)
Christen, Andreas; Rotach, Mathias W.; Vogt, Roland
2009-05-01
Full-scale observations from two urban sites in Basel, Switzerland were analysed to identify the magnitude of different processes that create, relocate, and dissipate turbulent kinetic energy (TKE) in the urban atmosphere. Two towers equipped with a profile of six ultrasonic anemometers each sampled the flow in the urban roughness sublayer, i.e. from street canyon base up to roughly 2.5 times the mean building height. This observational study suggests a conceptual division of the urban roughness sublayer into three layers: (1) the layer above the highest roofs, where local buoyancy production and local shear production of TKE are counterbalanced by local viscous dissipation rate and scaled turbulence statistics are close to to surface-layer values; (2) the layer around mean building height with a distinct inflexional mean wind profile, a strong shear and wake production of TKE, a more efficient turbulent exchange of momentum, and a notable export of TKE by transport processes; (3) the lower street canyon with imported TKE by transport processes and negligible local production. Averaged integral velocity variances vary significantly with height in the urban roughness sublayer and reflect the driving processes that create or relocate TKE at a particular height. The observed profiles of the terms of the TKE budget and the velocity variances show many similarities to observations within and above vegetation canopies.
Numerical study of single and two interacting turbulent plumes in atmospheric cross flow
NASA Astrophysics Data System (ADS)
Mokhtarzadeh-Dehghan, M. R.; König, C. S.; Robins, A. G.
The paper presents a numerical study of two interacting full-scale dry plumes issued into neutral boundary layer cross flow. The study simulates plumes from a mechanical draught cooling tower. The plumes are placed in tandem or side-by-side. Results are first presented for plumes with a density ratio of 0.74 and plume-to-crosswind speed ratio of 2.33, for which data from a small-scale wind tunnel experiment were available and were used to assess the accuracy of the numerical results. Further results are then presented for the more physically realistic density ratio of 0.95, maintaining the same speed ratio. The sensitivity of the results with respect to three turbulence models, namely, the standard k- ɛ model, the RNG k- ɛ model and the Differential Flux Model (DFM) is presented. Comparisons are also made between the predicted rise height and the values obtained from existing integral models. The formation of two counter-rotating vortices is well predicted. The results show good agreement for the rise height predicted by different turbulence models, but the DFM predicts temperature profiles more accurately. The values of predicted rise height are also in general agreement. However, discrepancies between the present results for the rise height for single and multiple plumes and the values obtained from known analytical relations are apparent and possible reasons for these are discussed.
NASA Technical Reports Server (NTRS)
Elardo, S. M.; Shearer, C. K.; McCubbin, F. M.
2017-01-01
The lunar magnesian-suite, or Mg-suite, is a series of ancient plutonic rocks from the lunar crust. They have received a considerable amount of attention from lunar scientists since their discovery for three primary reasons: 1) their ages and geochemistry indicate they represent pristine magmatic samples that crystallized very soon after the formation of the Moon; 2) their ages often overlap with ages of the ferroan anorthosite (FAN) crust; and 3) planetary-scale processes are needed in formation models to account for their unique geochemical features. Taken as a whole, the Mg-suite samples, as magmatic cumulate rocks, approximate a fractional crystallization sequence in the low-pressure forsterite-anorthite-silica system, and thus these samples are generally thought to be derived from layered mafic intrusions which crystallized very slowly from magmas that intruded the anorthositic crust. However, no direct linkages have been established between different Mg-suite samples based either on field relationships or geochemistry.The model for the origin of the Mg-suite, which best fits the limited available data, is one where Mg-suite magmas form from melting of a hybrid cumulate package consisting of deep mantle dunite, crustal anorthosite, and KREEP (potassium-rare earth elements-phosphorus) at the base of the crust under the Procellarum KREEP Terrane (PKT). In this model, these three LMO (Lunar Magma Ocean) cumulate components are brought into close proximity by the cumulate overturn process. Deep mantle dunitic cumulates with an Mg number of approximately 90 rise to the base of the anorthositic crust due to their buoyancy relative to colder, more dense Fe- and Ti-rich cumulates. This hybridized source rock melts to form Mg-suite magmas, saturated in Mg-rich olivine and anorthitic plagioclase, that have a substantial KREEP component.
NASA Astrophysics Data System (ADS)
Wang, Gang; Zhang, Yongzheng; Jiang, Yujing; Liu, Peixun; Guo, Yanshuang; Liu, Jiankang; Ma, Ming; Wang, Ke; Wang, Shugang
2018-06-01
To study shear failure, acoustic emission counts and characteristics of bolted jointed rock-like specimens are evaluated under compressive shear loading. Model joint surfaces with different roughnesses are made of rock-like material (i.e. cement). The jointed rock masses are anchored with bolts with different elongation rates. The characteristics of the shear mechanical properties, the failure mechanism, and the acoustic emission parameters of the anchored joints are studied under different surface roughnesses and anchorage conditions. The shear strength and residual strength increase with the roughness of the anchored joint surface. With an increase in bolt elongation, the shear strength of the anchored joint surface gradually decreases. When the anchored structural plane is sheared, the ideal cumulative impact curve can be divided into four stages: initial emission, critical instability, cumulative energy, and failure. With an increase in the roughness of the anchored joint surface, the peak energy rate and the cumulative number of events will also increase during macro-scale shear failure. With an increase in the bolt elongation, the energy rate and the event number increase during the shearing process. Furthermore, the peak energy rate, peak number of events and cumulative energy will all increase with the bolt elongation. The results of this study can provide guidance for the use of the acoustic emission technique in monitoring and predicting the static shear failure of anchored rock masses.
Teepakorn, Chalore; Fiaty, Koffi; Charcosset, Catherine
2015-07-17
During the last 10 years, membrane chromatography (MC) has been increasingly reported for biomolecule purification at both small and large scales. Although, several axial and radial flow MC devices are commercialized, the effect of the device dimensions on the adsorption performance has not been fully investigated. In this study, axial and radial flow anion ion-exchange MC devices were used for bovine serum albumin (BSA) adsorption. For both axial and radial flow, three devices at different scales were compared, two having similar diameter and two similar bed height. The pressure drop and the flow distribution using acetone as a non-binding solute were measured, as well as BSA breakthrough curves at different flow rates and BSA loading concentrations. For all devices, it was observed that the flow rate had no effect on the breakthrough curve, which confirms the advantage of MC to be used at high flow rates. In addition, the BSA binding capacity increased with increasing BSA concentration, which suggests that it could be preferable to work with concentrated solutions rather than with very dilute solutions, when using buffer at high phosphate concentration. For both axial and radial flow, the bed height had a negative impact on the binding capacity, as the lowest binding capacities per membrane volume were obtained with the devices having the highest bed height. Radial flow MC has potential at large-scale applications, as a short bed thickness can be combined with a large inlet surface area. Copyright © 2015 Elsevier B.V. All rights reserved.
Physical Accessibility of Routine Prenatal Care for Women with Mobility Disability
Wint, Amy J.; Smeltzer, Suzanne C.; Ecker, Jeffrey L.
2015-01-01
Abstract Background: Routine prenatal care includes physical examinations and weight measurement. Little is known about whether access barriers to medical diagnostic equipment, such as examination tables and weight scales, affect prenatal care among pregnant women with physical disabilities. Methods: We conducted 2-hour, in-depth telephone interviews with 22 women using a semistructured, open-ended interview protocol. All women had significant mobility difficulties before pregnancy and had delivered babies within the prior 10 years. We recruited most participants through social networks. We sorted interview transcript texts using used NVivo software and conducted conventional content analyses to identify major themes. Results: Interviewee's mean (standard deviation) age was 34.8 (5.3) years. Most were white, well-educated, and higher income; 8 women had spinal cord injuries, 4 cerebral palsy, and 10 had other conditions; 18 used wheeled mobility aids. Some women's obstetricians had height adjustable examination tables, which facilitated transfers for physical examinations. Other women had difficulty transferring onto fixed height examination tables and were examined while sitting in their wheelchairs. Family members and/or clinical staff sometimes assisted with transfers; some women reported concerns about transfer safety. No women reported being routinely weighed on an accessible weight scale by their prenatal care clinicians. A few were never weighed during their pregnancies. Conclusions: Inaccessible examination tables and weight scales impede some pregnant women with physical disabilities from getting routine prenatal physical examinations and weight measurement. This represents substandard care. Adjustable height examination tables and wheelchair accessible weight scales could significantly improve care and comfort for pregnant women with physical disabilities. PMID:26484689
Physical Accessibility of Routine Prenatal Care for Women with Mobility Disability.
Iezzoni, Lisa I; Wint, Amy J; Smeltzer, Suzanne C; Ecker, Jeffrey L
2015-12-01
Routine prenatal care includes physical examinations and weight measurement. Little is known about whether access barriers to medical diagnostic equipment, such as examination tables and weight scales, affect prenatal care among pregnant women with physical disabilities. We conducted 2-hour, in-depth telephone interviews with 22 women using a semistructured, open-ended interview protocol. All women had significant mobility difficulties before pregnancy and had delivered babies within the prior 10 years. We recruited most participants through social networks. We sorted interview transcript texts using used NVivo software and conducted conventional content analyses to identify major themes. Interviewee's mean (standard deviation) age was 34.8 (5.3) years. Most were white, well-educated, and higher income; 8 women had spinal cord injuries, 4 cerebral palsy, and 10 had other conditions; 18 used wheeled mobility aids. Some women's obstetricians had height adjustable examination tables, which facilitated transfers for physical examinations. Other women had difficulty transferring onto fixed height examination tables and were examined while sitting in their wheelchairs. Family members and/or clinical staff sometimes assisted with transfers; some women reported concerns about transfer safety. No women reported being routinely weighed on an accessible weight scale by their prenatal care clinicians. A few were never weighed during their pregnancies. Inaccessible examination tables and weight scales impede some pregnant women with physical disabilities from getting routine prenatal physical examinations and weight measurement. This represents substandard care. Adjustable height examination tables and wheelchair accessible weight scales could significantly improve care and comfort for pregnant women with physical disabilities.
Lobo, Elena; Dalling, James W.
2014-01-01
Treefall gaps play an important role in tropical forest dynamics and in determining above-ground biomass (AGB). However, our understanding of gap disturbance regimes is largely based either on surveys of forest plots that are small relative to spatial variation in gap disturbance, or on satellite imagery, which cannot accurately detect small gaps. We used high-resolution light detection and ranging data from a 1500 ha forest in Panama to: (i) determine how gap disturbance parameters are influenced by study area size, and the criteria used to define gaps; and (ii) to evaluate how accurately previous ground-based canopy height sampling can determine the size and location of gaps. We found that plot-scale disturbance parameters frequently differed significantly from those measured at the landscape-level, and that canopy height thresholds used to define gaps strongly influenced the gap-size distribution, an important metric influencing AGB. Furthermore, simulated ground surveys of canopy height frequently misrepresented the true location of gaps, which may affect conclusions about how relatively small canopy gaps affect successional processes and contribute to the maintenance of diversity. Across site comparisons need to consider how gap definition, scale and spatial resolution affect characterizations of gap disturbance, and its inferred importance for carbon storage and community composition. PMID:24452032
NASA Astrophysics Data System (ADS)
Silverman, M. L.; Szykman, J.; Chen, G.; Crawford, J. H.; Janz, S. J.; Kowalewski, M. G.; Lamsal, L. N.; Long, R.
2015-12-01
Studies have shown that satellite NO2 columns are closely related to ground level NO2 concentrations, particularly over polluted areas. This provides a means to assess surface level NO2 spatial variability over a broader area than what can be monitored from ground stations. The characterization of surface level NO2 variability is important to understand air quality in urban areas, emissions, health impacts, photochemistry, and to evaluate the performance of chemical transport models. Using data from the NASA DISCOVER-AQ campaign in Baltimore/Washington we calculate NO2 mixing ratios from the Airborne Compact Atmospheric Mapper (ACAM), through four different methods to derive surface concentration from column measurements. High spectral resolution lidar (HSRL) mixed layer heights, vertical P3B profiles, and CMAQ vertical profiles are used to scale ACAM vertical column densities. The derived NO2 mixing ratios are compared to EPA ground measurements taken at Padonia and Edgewood. We find similar results from scaling with HSRL mixed layer heights and normalized P3B vertical profiles. The HSRL mixed layer heights are then used to scale ACAM vertical column densities across the DISCOVER-AQ flight pattern to assess spatial variability of NO2 over the area. This work will help define the measurement requirements for future satellite instruments.
Airborne Sea-Surface Topography in an Absolute Reference Frame
NASA Astrophysics Data System (ADS)
Brozena, J. M.; Childers, V. A.; Jacobs, G.; Blaha, J.
2003-12-01
Highly dynamic coastal ocean processes occur at temporal and spatial scales that cannot be captured by the present generation of satellite altimeters. Space-borne gravity missions such as GRACE also provide time-varying gravity and a geoidal msl reference surface at resolution that is too coarse for many coastal applications. The Naval Research Laboratory and the Naval Oceanographic Office have been testing the application of airborne measurement techniques, gravity and altimetry, to determine sea-surface height and height anomaly at the short scales required for littoral regions. We have developed a precise local gravimetric geoid over a test region in the northern Gulf of Mexico from historical gravity data and recent airborne gravity surveys. The local geoid provides a msl reference surface with a resolution of about 10-15 km and provides a means to connect airborne, satellite and tide-gage observations in an absolute (WGS-84) framework. A series of altimetry reflights over the region with time scales of 1 day to 1 year reveal a highly dynamic environment with coherent and rapidly varying sea-surface height anomalies. AXBT data collected at the same time show apparent correlation with wave-like temperature anomalies propagating up the continental slope of the Desoto Canyon. We present animations of the temporal evolution of the surface topography and water column temperature structure down to the 800 m depth of the AXBT sensors.
Single photon counting linear mode avalanche photodiode technologies
NASA Astrophysics Data System (ADS)
Williams, George M.; Huntington, Andrew S.
2011-10-01
The false count rate of a single-photon-sensitive photoreceiver consisting of a high-gain, low-excess-noise linear-mode InGaAs avalanche photodiode (APD) and a high-bandwidth transimpedance amplifier (TIA) is fit to a statistical model. The peak height distribution of the APD's multiplied dark current is approximated by the weighted sum of McIntyre distributions, each characterizing dark current generated at a different location within the APD's junction. The peak height distribution approximated in this way is convolved with a Gaussian distribution representing the input-referred noise of the TIA to generate the statistical distribution of the uncorrelated sum. The cumulative distribution function (CDF) representing count probability as a function of detection threshold is computed, and the CDF model fit to empirical false count data. It is found that only k=0 McIntyre distributions fit the empirically measured CDF at high detection threshold, and that false count rate drops faster than photon count rate as detection threshold is raised. Once fit to empirical false count data, the model predicts the improvement of the false count rate to be expected from reductions in TIA noise and APD dark current. Improvement by at least three orders of magnitude is thought feasible with further manufacturing development and a capacitive-feedback TIA (CTIA).
Work stress of women in sewing machine operation.
Nag, A; Desai, H; Nag, P K
1992-06-01
The study examined the work stresses of 107 women who were engaged in sewing machine operation in small garment manufacturing units. Of the three types of sewing machines (motor-operated, full and half shuttle foot-operated), 74% of the machines were foot-operated, where throttle action of the lower limb is required to move the shuttle of the machine. The motor-operated machines were faster than the foot-operated machines. The short cycle sewing work involves repetitive action of hand and feet. The women had to maintain a constant seated position on a stool without backrest and the body inclined forward. Long-term sewing work had a cumulative load on the musculo-skeletal structures, including the vertebral column and reflected in the form of high prevalence of discomfort and pain in different body parts. About 68% of the women complained of back pain, among whom 35% reported a persistent low back pain. Common sewing work accident is piercing of the needle through the fingers, particularly the right forefingers. Unsatisfactory man-machine incompatibility, work posture and fatigue, improper coordination of eye, leg and hand are the major problems of the operators. The design mis-match of the work place may be significantly improved by taking women's anthropometric dimensions in modifying the workplace, i.e. the seat surface, seat height, work height, backrest, etc.
Development of large Area Covering Height Model
NASA Astrophysics Data System (ADS)
Jacobsen, K.
2014-04-01
Height information is a basic part of topographic mapping. Only in special areas frequent update of height models is required, usually the update cycle is quite lower as for horizontal map information. Some height models are available free of charge in the internet; for commercial height models a fee has to be paid. Mostly digital surface models (DSM) with the height of the visible surface are given and not the bare ground height, as required for standard mapping. Nevertheless by filtering of DSM, digital terrain models (DTM) with the height of the bare ground can be generated with the exception of dense forest areas where no height of the bare ground is available. These height models may be better as the DTM of some survey administrations. In addition several DTM from national survey administrations are classified, so as alternative the commercial or free of charge available information from internet can be used. The widely used SRTM DSM is available also as ACE-2 GDEM corrected by altimeter data for systematic height errors caused by vegetation and orientation errors. But the ACE-2 GDEM did not respect neighbourhood information. With the worldwide covering TanDEM-X height model, distributed starting 2014 by Airbus Defence and Space (former ASTRIUM) as WorldDEM, higher level of details and accuracy is reached as with other large area covering height models. At first the raw-version of WorldDEM will be available, followed by an edited version and finally as WorldDEM-DTM a height model of the bare ground. With 12 m spacing and a relative standard deviation of 1.2 m within an area of 1° x 1° an accuracy and resolution level is reached, satisfying also for larger map scales. For limited areas with the HDEM also a height model with 6 m spacing and a relative vertical accuracy of 0.5 m can be generated on demand. By bathymetric LiDAR and stereo images also the height of the sea floor can be determined if the water has satisfying transparency. Another method of getting bathymetric height information is an analysis of the wave structure in optical and SAR-images. An overview about the absolute and relative accuracy, the consistency, error distribution and other characteristics as influence of terrain inclination and aspects is given. Partially by post processing the height models can or have to be improved.