Gusts and shear within hurricane eyewalls can exceed offshore wind turbine design standards

DOE PAGES

Worsnop, Rochelle P.; Lundquist, Julie K.; Bryan, George H.; ...

2017-05-30

Here, offshore wind energy development is underway in the U.S., with proposed sites located in hurricane-prone regions. Turbine design criteria outlined by the International Electrotechnical Commission do not encompass the extreme wind speeds and directional shifts of hurricanes stronger than category 2. We examine a hurricane's turbulent eyewall using large-eddy simulations with Cloud Model 1. Gusts and mean wind speeds near the eyewall of a category 5 hurricane exceed the current Class I turbine design threshold of 50 m s –1 mean wind and 70 m s –1 gusts. Largest gust factors occur at the eye-eyewall interface. Further, shifts inmore » wind direction suggest that turbines must rotate or yaw faster than current practice. Although current design standards omit mention of wind direction change across the rotor layer, large values (15–50°) suggest that veer should be considered.« less

Gusts and shear within hurricane eyewalls can exceed offshore wind turbine design standards

DOE Office of Scientific and Technical Information (OSTI.GOV)

Worsnop, Rochelle P.; Lundquist, Julie K.; Bryan, George H.

Here, offshore wind energy development is underway in the U.S., with proposed sites located in hurricane-prone regions. Turbine design criteria outlined by the International Electrotechnical Commission do not encompass the extreme wind speeds and directional shifts of hurricanes stronger than category 2. We examine a hurricane's turbulent eyewall using large-eddy simulations with Cloud Model 1. Gusts and mean wind speeds near the eyewall of a category 5 hurricane exceed the current Class I turbine design threshold of 50 m s –1 mean wind and 70 m s –1 gusts. Largest gust factors occur at the eye-eyewall interface. Further, shifts inmore » wind direction suggest that turbines must rotate or yaw faster than current practice. Although current design standards omit mention of wind direction change across the rotor layer, large values (15–50°) suggest that veer should be considered.« less

User's guide for LTGSTD24 program, Version 2. 4

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hanlon, R.L.; Connell, L.M.

1993-05-01

On January 30, 1989, the US Department of Energy (DOE) promulgated an interim rule entitled [open quotes]Energy Conservation Voluntary Performance Standards for New Commercial and Multi-Family High Rise Residential Buildings; Mandatory for New Federal Buildings[close quotes] (10 CFR Part 435, Subpart A). These standards require federal agencies to design all future federal commercial and multifamily high-rise residential buildings in accordance with the standards, or demonstrate that their current requirements already meet or exceed the energy-efficiency requirements of the standards. Although these newly enacted standards do not regulate the design of non-federal buildings, the DOE recommends that all design professionals usemore » the standards as guidelines for designing energy-conserving buildings. To encourage private sector use, the DOE published the standards in the January 30, 1989, Federal Register in the format typical of commercial standards. The Pacific Northwest Laboratory developed several computer programs for the DOE to make it easier for designers to comply with the standards. One of the programs, LTGSTD24 (Version 2.4), is detailed in this user's guide and is provided on the accompanying diskettes. The program will facilitate the designer's use of the standards dealing specifically with building lighting design. Using this program will greatly simplify the designer's task of performing the calculations needed to determine if a design complies with the standards.« less

Preventing Epilepsy after Traumatic Brain Injury

DTIC Science & Technology

2007-02-01

the standard of care ( phenytoin ). A secondary objective is to obtain the data necessary to design a randomized clinical trial to determine if TPM can...than the current standard of care ( phenytoin ). A secondary objective is to obtain the data necessary to design a randomized clinical trial to...dose of phenytoin within several hours of being admitted to the trauma/neurosurgical unit, as part of the standard of care for such individuals. The

Motivational Design in Information Literacy Instruction

ERIC Educational Resources Information Center

Hess, Amanda Nichols

2015-01-01

Motivational design theory complements instructional design theory and, when used together, both principles can affect learning, knowledge acquisition, and knowledge retention. In information literacy instruction, motivational design exists throughout the appropriate standards documents. However, there is limited current research on the best…

System 80+{trademark} standard design incorporates radiation protection lessons learned

DOE Office of Scientific and Technical Information (OSTI.GOV)

Crom, T.D.; Naugle, C.L.; Turk, R.S.

1995-03-01

Many lessons have been learned from the current generation of nuclear plants in the area of radiation protection. The following paper will outline how the lessons learned have been incorporated into the design and operational philosophy of the System 80+{trademark} Standard Design currently under development by ABB Combustion Engineering (ABB-CE) with support from Duke Engineering and Services, Inc. and Stone and Webster Engineering Corporation in the Balance-of-Plant design. The System 80+{trademark} Standard Design is a complete nuclear power plant for national and international markets, designed in direct response to utility needs for the 1990`s, and scheduled for Nuclear Regulatory Commissionmore » (NRC) Design Certification under the new standardization rule (10 CFR Part 52). System 80+{trademark} is a natural extension of System 80{sup R} technology, an evolutionary change based on proven Nuclear Steam Supply System (NSSS) in operation at Palo Verde in Arizona and under construction at Yonggwang in the Republic of Korea. The System 80+{trademark} Containment and much of the Balance of Plant design is based upon Duke Power Company`s Cherokee Plant, which was partially constructed in the late 1970`s, but, was later canceled (due to rapid declined in electrical load growth). The System 80+{trademark} Standard Design meets the requirements given in the Electric Power Research Institute (EPRI) Advanced Light Water Reactor (ALWR) Requirements Document. One of these requirements is to limit the occupational exposure to 100 person-rem/yr. This paper illustrates how this goal can be achieved through the incorporation of lessons learned, innovative design, and the implementation of a common sense approach to operation and maintenances practices.« less

Continuous prestressed concrete girder bridges volume 1 : literature review and preliminary designs.

DOT National Transportation Integrated Search

2012-06-01

The Texas Department of Transportation (TxDOT) is currently designing typical highway bridge structures as simply supported using standard precast, pretensioned girders. TxDOT is interested in developing additional economical design alternatives for ...

Strategies of bringing drug product marketing applications to meet current regulatory standards.

PubMed

Wu, Yan; Freed, Anita; Lavrich, David; Raghavachari, Ramesh; Huynh-Ba, Kim; Shah, Ketan; Alasandro, Mark

2015-08-01

In the past decade, many guidance documents have been issued through collaboration of global organizations and regulatory authorities. Most of these are applicable to new products, but there is a risk that currently marketed products will not meet the new compliance standards during audits and inspections while companies continue to make changes through the product life cycle for continuous improvement or market demands. This discussion presents different strategies to bringing drug product marketing applications to meet current and emerging standards. It also discusses stability and method designs to meet process validation and global development efforts.

Impact of New large Aircraft on Airport Design

DOT National Transportation Integrated Search

1998-03-01

The object of this project is to assess the impact of the introduction of proposed new large aircraft (NLA) on current airport design standards and administered by the Federal Aviation Administration (FAA). This report identifies several key design a...

NASA Space Flight Human-System Standard Human Factors, Habitability, and Environmental Health

NASA Technical Reports Server (NTRS)

Holubec, Keith; Connolly, Janis

2010-01-01

This slide presentation reviews the history, and development of NASA-STD-3001, NASA Space Flight Human-System Standard Human Factors, Habitability, and Environmental Health, and the related Human Integration Design Handbook. Currently being developed from NASA-STD-3000, this project standard currently in review will be available in two volumes, (i.e., Volume 1 -- VCrew Health and Volume 2 -- Human Factors, Habitability, and Environmental Health) and the handbook will be both available as a pdf file and as a interactive website.

Influence of the new LRFD seismic guidelines on the design of bridges in Virginia.

DOT National Transportation Integrated Search

2004-01-01

The Virginia Department of Transportation is currently using the AASHTO Standard Specifications for Highway Bridges, with some modifications, for its seismic highway bridge design. In April 2001, the Recommended LRFD Guidelines for the Seismic Design...

Integrated optomechanical analysis and testing software development at MIT Lincoln Laboratory

NASA Astrophysics Data System (ADS)

Stoeckel, Gerhard P.; Doyle, Keith B.

2013-09-01

Advanced analytical software capabilities are being developed to advance the design of prototypical hardware in the Engineering Division at MIT Lincoln Laboratory. The current effort is focused on the integration of analysis tools tailored to the work flow, organizational structure, and current technology demands. These tools are being designed to provide superior insight into the interdisciplinary behavior of optical systems and enable rapid assessment and execution of design trades to optimize the design of optomechanical systems. The custom software architecture is designed to exploit and enhance the functionality of existing industry standard commercial software, provide a framework for centralizing internally developed tools, and deliver greater efficiency, productivity, and accuracy through standardization, automation, and integration. Specific efforts have included the development of a feature-rich software package for Structural-Thermal-Optical Performance (STOP) modeling, advanced Line Of Sight (LOS) jitter simulations, and improved integration of dynamic testing and structural modeling.

Users guide for ENVSTD program Version 2. 0 and LTGSTD program Version 2. 0

DOE Office of Scientific and Technical Information (OSTI.GOV)

Crawley, D.B.; Riesen, P.K.; Briggs, R.S.

1989-02-01

On January 30, 1989, the US Department of Energy (DOE) promulgated 10 CFR Part 435, Subpart A, an Interim Rule entitled ''Energy Conservation Voluntary Performance Standards for New Commercial and Multi-Family High Rise Residential Buildings; Mandatory for New Federal Buildings.'' As a consequence, federal agencies must design all future federal commercial and multifamily high rise residential buildings in accordance with the Standards, or show that their current standards already meet or exceed the energy-efficiency requirements of the Standards. Although these newly enacted Standards do not regulate the design of nonfederal buildings, DOE recommends that all design professionals use the Standardsmore » as guidelines for designing energy-conserving buildings. To encourage private sector use, the Standards were presented in the January 30, 1989, Federal Register in the format typical of commercial standards rather than a federal regulation. As a further help, DOE supported the development of various microcomputer programs to ease the use of the Standards. Two of these programs/emdash/ENVSTD (Version 2.0) and LTGSTD (Version 2.0)/emdash/are detailed in this users guide and provided on the accompanying diskette. This package, developed by Pacific Northwest Laboratory (PNL), is intended to facilitate the designer's use of the Standards dealing specifically with a building's envelope and lighting system designs. Using these programs will greatly simplify the designer's task of performing the sometimes complex calculations needed to determine a design's compliance with the Standards. 3 refs., 6 figs.« less

Design of air-gapped magnetic-core inductors for superimposed direct and alternating currents

NASA Technical Reports Server (NTRS)

Ohri, A. K.; Wilson, T. G.; Owen, H. A., Jr.

1976-01-01

Using data on standard magnetic-material properties and standard core sizes for air-gap-type cores, an algorithm designed for a computer solution is developed which optimally determines the air-gap length and locates the quiescent point on the normal magnetization curve so as to yield an inductor design with the minimum number of turns for a given ac voltage and frequency and with a given dc bias current superimposed in the same winding. Magnetic-material data used in the design are the normal magnetization curve and a family of incremental permeability curves. A second procedure, which requires a simpler set of calculations, starts from an assigned quiescent point on the normal magnetization curve and first screens candidate core sizes for suitability, then determines the required turns and air-gap length.

Single-Case Experimental Designs: A Systematic Review of Published Research and Current Standards

ERIC Educational Resources Information Center

Smith, Justin D.

2012-01-01

This article systematically reviews the research design and methodological characteristics of single-case experimental design (SCED) research published in peer-reviewed journals between 2000 and 2010. SCEDs provide researchers with a flexible and viable alternative to group designs with large sample sizes. However, methodological challenges have…

78 FR 11593 - Environmental Impact and Related Procedures

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-19

... reconstruction activity is in the same location with the same capacity, dimensions, and design as the original... capacity, dimensions, and design as the original road, highway, or bridge as before the declaration, and (B... and design changes to a damaged facility to meet current design standards; (2) repair and...

Design challenges and gaps in standards in developing an interoperable zero footprint DI thin client for use in image-enabled electronic health record solutions

NASA Astrophysics Data System (ADS)

Agrawal, Arun; Koff, David; Bak, Peter; Bender, Duane; Castelli, Jane

2015-03-01

The deployment of regional and national Electronic Health Record solutions has been a focus of many countries throughout the past decade. A major challenge for these deployments has been support for ubiquitous image viewing. More specifically, these deployments require an imaging solution that can work over the Internet, leverage any point of service device: desktop, tablet, phone; and access imaging data from any source seamlessly. Whereas standards exist to enable ubiquitous image viewing, few if any solutions exist that leverage these standards and meet the challenge. Rather, most of the currently available web based DI viewing solutions are either proprietary solutions or require special plugins. We developed a true zero foot print browser based DI viewing solution based on the Web Access DICOM Objects (WADO) and Cross-enterprise Document Sharing for Imaging (XDS-I.b) standards to a) demonstrate that a truly ubiquitous image viewer can be deployed; b) identify the gaps in the current standards and the design challenges for developing such a solution. The objective was to develop a viewer, which works on all modern browsers on both desktop and mobile devices. The implementation allows basic viewing functionalities of scroll, zoom, pan and window leveling (limited). The major gaps identified in the current DICOM WADO standards are a lack of ability to allow any kind of 3D reconstruction or MPR views. Other design challenges explored include considerations related to optimization of the solution for response time and low memory foot print.

Clearing a Path: The 16-Bit Operating System Jungle Offers Confusion, Not Standardization.

ERIC Educational Resources Information Center

Pournelle, Jerry

1984-01-01

Discusses the design and limited uses of the Pascal, MS-DOS, CP/M, and PC-DOS operating systems as standard operating systems for 16-bit microprocessors, especially with the more sophisticated microcomputers currently being developed. Advantages and disadvantages of Unix--a multitasking, multiuser operating system--as a standard operating system…

DESIGN NOTE: New apparatus for haze measurement for transparent media

NASA Astrophysics Data System (ADS)

Yu, H. L.; Hsiao, C. C.; Liu, W. C.

2006-08-01

Precise measurement of luminous transmittance and haze of transparent media is increasingly important to the LCD industry. Currently there are at least three documentary standards for measuring transmission haze. Unfortunately, none of those standard methods by itself can obtain the precise values for the diffuse transmittance (DT), total transmittance (TT) and haze. This note presents a new apparatus capable of precisely measuring all three variables simultaneously. Compared with current structures, the proposed design contains one more compensatory port. For optimal design, the light trap absorbs the beam completely, light scattered by the instrument is zero and the interior surface of the integrating sphere, baffle, as well as the reflectance standard, are of equal characteristic. The accurate values of the TT, DT and haze can be obtained using the new apparatus. Even if the design is not optimal, the measurement errors of the new apparatus are smaller than those of other methods especially for high sphere reflectance. Therefore, the sphere can be made of a high reflectance material for the new apparatus to increase the signal-to-noise ratio.

Development of low-shock pyrotechnic separation nuts. [design performance of flight type nuts

NASA Technical Reports Server (NTRS)

Bement, L. J.; Neubert, V. H.

1973-01-01

Performance demonstrations and comparisons were made on six flight type pyrotechnic separation nut designs, two of which are standard designs in current use, and four of which were designed to produce low shock on actuation. Although the shock performances of the four low shock designs are considerably lower than the standard designs, some penalties may be incurred in increased volume, weight, or complexity. These nuts, and how they are installed, can significantly influence the pyrotechnic shock created in spacecraft structures. A high response monitoring system has been developed and demonstrated to provide accurate performance comparisons for pyrotechnic separation nuts.

Guidelines for the Design and Conduct of Clinical Studies in Knee Articular Cartilage Repair

PubMed Central

Mithoefer, Kai; Saris, Daniel B.F.; Farr, Jack; Kon, Elizaveta; Zaslav, Kenneth; Cole, Brian J.; Ranstam, Jonas; Yao, Jian; Shive, Matthew; Levine, David; Dalemans, Wilfried; Brittberg, Mats

2011-01-01

Objective: To summarize current clinical research practice and develop methodological standards for objective scientific evaluation of knee cartilage repair procedures and products. Design: A comprehensive literature review was performed of high-level original studies providing information relevant for the design of clinical studies on articular cartilage repair in the knee. Analysis of cartilage repair publications and synopses of ongoing trials were used to identify important criteria for the design, reporting, and interpretation of studies in this field. Results: Current literature reflects the methodological limitations of the scientific evidence available for articular cartilage repair. However, clinical trial databases of ongoing trials document a trend suggesting improved study designs and clinical evaluation methodology. Based on the current scientific information and standards of clinical care, detailed methodological recommendations were developed for the statistical study design, patient recruitment, control group considerations, study endpoint definition, documentation of results, use of validated patient-reported outcome instruments, and inclusion and exclusion criteria for the design and conduct of scientifically sound cartilage repair study protocols. A consensus statement among the International Cartilage Repair Society (ICRS) and contributing authors experienced in clinical trial design and implementation was achieved. Conclusions: High-quality clinical research methodology is critical for the optimal evaluation of current and new cartilage repair technologies. In addition to generally applicable principles for orthopedic study design, specific criteria and considerations apply to cartilage repair studies. Systematic application of these criteria and considerations can facilitate study designs that are scientifically rigorous, ethical, practical, and appropriate for the question(s) being addressed in any given cartilage repair research project. PMID:26069574

Resistance factors for 100% dynamic testing, with and without static load tests.

DOT National Transportation Integrated Search

2011-05-01

Current department of transportation (DOT) and Federal Highway Administration (FHWA) practice has highly : variable load and resistance factor design (LRFD) resistance factors, , for driven piles from design (e.g., Standard : Penetration Tests (SPT...

The Role of Exposure Science in Air Quality Management

EPA Science Inventory

Air quality standards and regulations are designed to protect public health and the environment. However, there are issues regarding whether the current standards and regulations should be adjusted to be more protective or to more effectively target air quality management activi...

Standardizing Interaction Design Education

ERIC Educational Resources Information Center

Thomassen, Aukje; Ozcan, Oguzhan

2010-01-01

The objective of this paper is to which extend the didactic format of studio-based group-work is applicable for creating a common-ground for Interaction Design Education in European Perspective. The current debate on design education shows us a landscape of different initiatives. So far difficulties have arisen in the area of accreditation and…

Engineering Design Skills Coverage in K-12 Engineering Program Curriculum Materials in the USA

ERIC Educational Resources Information Center

Chabalengula, Vivien M.; Mumba, Frackson

2017-01-01

The current "K-12 Science Education framework" and "Next Generation Science Standards" (NGSS) in the United States emphasise the integration of engineering design in science instruction to promote scientific literacy and engineering design skills among students. As such, many engineering education programmes have developed…

Calibration of the MEPDG transfer functions in Georgia : task order 2 report.

DOT National Transportation Integrated Search

2015-03-28

The Georgia Department of Transportation (GDOT) currently uses the empirical 1972 AASHTO Interim Guide for : Design of Pavement Structures as their standard pavement design procedure. However, GDOT plans to transition to the : Mechanistic Empirical P...

DOE Office of Scientific and Technical Information (OSTI.GOV)

None, None

Snapshot reports use data from DOE's LED Lighting Facts product list to compare the LED performance to standard technologies, and are designed to help lighting retailers, distributors, designers, utilities, energy efficiency program sponsors, and other stakeholders understand the current state of the LED market and its trajectory.

A rapid method for soil cement design : Louisiana slope value method.

DOT National Transportation Integrated Search

1964-03-01

The current procedure used by the Louisiana Department of Highways for laboratory design of cement stabilized soil base and subbase courses is taken from standard AASHO test methods, patterned after Portland Cement Association criteria. These methods...

ARPA-E LITECAR Challenge

ScienceCinema

Liu, Ping; Salvi, Ashwin

2018-01-16

With more than 250 conceptual designs submitted, we are pleased to highlight the winners of the LIghtweighting Technologies Enabling Comprehensive Automotive Redesign (LITECAR) Challenge. These innovative conceptual designs seek to lightweight a vehicle while maintaining or exceeding current U.S. automotive safety standards.

Bringing Engineering Design into High School Science Classrooms: The Heating/Cooling Unit

ERIC Educational Resources Information Center

Apedoe, Xornam S.; Reynolds, Birdy; Ellefson, Michelle R.; Schunn, Christian D.

2008-01-01

Infusing engineering design projects in K-12 settings can promote interest and attract a wide range of students to engineering careers. However, the current climate of high-stakes testing and accountability to standards leaves little room to incorporate engineering design into K-12 classrooms. We argue that design-based learning, the combination…

77 FR 62216 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-12

...: National Institute of Standards and Technology (NIST). Title: Generic Clearance for Program Evaluation Data... National Institute of Standards and Technology (NIST), a non-regulatory agency of the Department of Commerce, proposes to conduct surveys--both quantitative and qualitative--designed to evaluate our current...

Preventing Epilepsy After Traumatic Brain Injury

DTIC Science & Technology

2008-02-01

early seizures to the standard of care ( phenytoin ). A secondary objective is to obtain the data necessary to design a randomized clinical trial to...protocol was revised to eliminate several major obstacles. We have enrolled 5 subjects into the study; two in the phenytoin arm, one in the short term...prevent early seizures better than the current standard of care ( phenytoin ). A secondary objective is to obtain the data necessary to design a randomized

Health Data Standards and Adoption Process: Preliminary Findings of a Qualitative Study in Saudi Arabia

ERIC Educational Resources Information Center

Alkraiji, Abdullah; Jackson, Thomas; Murray, Ian

2011-01-01

Purpose: This paper seeks to carry out a critical study of health data standards and adoption process with a focus on Saudi Arabia. Design/methodology/approach: Many developed nations have initiated programs to develop, promote, adopt and customise international health data standards to the local needs. The current status of, and future plans for,…

Listening to Early Career Teachers: How Can Elementary Mathematics Methods Courses Better Prepare Them to Utilize Standards-Based Practices in Their Classrooms?

ERIC Educational Resources Information Center

Coester, Lee Anne

2010-01-01

This study was designed to gather input from early career elementary teachers with the goal of finding ways to improve elementary mathematics methods courses. Multiple areas were explored including the degree to which respondents' elementary mathematics methods course focused on the NCTM Process Standards, the teachers' current standards-based…

Air Force Space Command. Space and Missile Systems Center Standard. Electromagnetic Compatibility Requirements for Space Equipment and Systems

DTIC Science & Technology

2008-06-13

technology developments. 2. This new-issue SMC standard comprises the text of The Aerospace Corporation report number TOR-2005( 8583 )-1. 3...issues of the documents are the current versions. 1. Aerospace Report No. TOR-2005( 8583 )-2, Electrical Power Systems, Direct Current, Space Vehicle...Design Requirements, The Aerospace Corp., 13 January 2005. 2. Aerospace Report No. TR-2004( 8583 )-1 (proposed MIL-STD-1540E), Test Requirements for

SLRV Engineering Tests at Department of Transportation Transportation Test Center : Volume 1. Introduction.

DOT National Transportation Integrated Search

1979-01-01

The Standard Light Rail Vehicle (SLRV) is a 71-foot vehicle, articulated to negotiate curves down to 32-foot radius and designed to operate at speeds up to 50 mph. Although the basic configuration and performance is standardized, the current operatin...

78 FR 45104 - Model Manufactured Home Installation Standards: Ground Anchor Installations

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-26

... test methods for establishing working load design values of ground anchor assemblies used for new... anchor installations and establish standardized test methods to determine ground anchor performance and... currently no national test method for rating and certifying ground anchor assemblies in different soil...

Electronic Model of a Ferroelectric Field Effect Transistor

NASA Technical Reports Server (NTRS)

MacLeod, Todd C.; Ho, Fat Duen; Russell, Larry (Technical Monitor)

2001-01-01

A pair of electronic models has been developed of a Ferroelectric Field Effect transistor. These models can be used in standard electrical circuit simulation programs to simulate the main characteristics of the FFET. The models use the Schmitt trigger circuit as a basis for their design. One model uses bipolar junction transistors and one uses MOSFET's. Each model has the main characteristics of the FFET, which are the current hysterisis with different gate voltages and decay of the drain current when the gate voltage is off. The drain current from each model has similar values to an actual FFET that was measured experimentally. T'he input and o Output resistance in the models are also similar to that of the FFET. The models are valid for all frequencies below RF levels. No attempt was made to model the high frequency characteristics of the FFET. Each model can be used to design circuits using FFET's with standard electrical simulation packages. These circuits can be used in designing non-volatile memory circuits and logic circuits and is compatible with all SPICE based circuit analysis programs. The models consist of only standard electrical components, such as BJT's, MOSFET's, diodes, resistors, and capacitors. Each model is compared to the experimental data measured from an actual FFET.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kornfeldt, H.; Bjoerk, K.O.; Ekstroem, P.

The protection against dynamic effects in connection with potential pipe breaks has been implemented in different ways in the development of BWR reactor designs. First-generation plant designs reflect code requirements in effect at that time which means that no piping restraint systems were designed and built into those plants. Modern designs have, in contrast, implemented full protection against damage in connection with postulated pipe breaks, as required in current codes and regulations. Moderns standards and current regulatory demands can be met for the older plants by backfitting pipe whip restraint hardware. This could lead to several practical difficulties as thesemore » installations were not anticipated in the original plant design and layout. Meeting the new demands by analysis would in this situation have great advantages. Application of leak-before-break criteria gives an alternative opportunity of meeting modem standards in reactor safety design. Analysis takes into account data specific to BWR primary system operation, actual pipe material properties, piping loads and leak detection capability. Special attention must be given to ensure that the data used reflects actual plant conditions.« less

Comparison of different measurement methods for transmittance haze

NASA Astrophysics Data System (ADS)

Yu, Hsueh-Ling; Hsaio, Chin-Chai

2009-08-01

Transmittance haze is increasingly important to the LCD and solar cell industry. Most commercial haze measurement instruments are designed according to the method recommended in the documentary standards like ASTM D 1003 (ASTM 2003 Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics), JIS K 7361 (JIS 1997 Plastics—Determination of the Total Luminous Transmittance of Transparent Materials—Part 1: Single Beam Instrument) and ISO 14782 (ISO 1997 Plastics—Determination of Haze of Transparent Materials). To improve the measurement accuracy of the current standards, a new apparatus was designed by the Center for Measurement Standards (Yu et al 2006 Meas. Sci. Technol. 17 N29-36). Besides the methods mentioned above, a double-beam method is used in the design of some instruments. There are discrepancies between the various methods. But no matter which method is used, a white standard is always needed. This paper compares the measurement results from different methods, presents the effect of the white standard, and analyses the measurement uncertainty.

Teaching physics using project-based engineering curriculum with a theme of alternative energy

NASA Astrophysics Data System (ADS)

Tasior, Bryan

The Next Generation Science Standards (NGSS) provide a new set of science standards that, if adopted, shift the focus from content knowledge-based to skill-based education. Students will be expected to use science to investigate the natural world and solve problems using the engineering design process. The world also is facing an impending crisis related to climate, energy supply and use, and alternative energy development. Education has an opportunity to help provide the much needed paradigm shift from our current methods of providing the energy needs of society. The purpose of this research was to measure the effectiveness of a unit that accomplishes the following objectives: uses project-based learning to teach the engineering process and standards of the NGSS, addresses required content expectations of energy and electricity from the HSCE's, and provides students with scientific evidence behind issues (both environmental and social/economic) relating to the energy crisis and current dependence of fossil fuels as our primary energy source. The results of the research indicate that a physics unit can be designed to accomplish these objectives. The unit that was designed, implemented and reported here also shows that it was highly effective at improving students' science content knowledge, implementing the engineering design standards of the NGSS, while raising awareness, knowledge and motivations relating to climate and the energy crisis.

New ANSI standard for thyroid phantom

DOE PAGES

Mallett, Michael W.; Bolch, Wesley E.; Fulmer, Philip C.; ...

2015-08-01

Here, a new ANSI standard titled “Thyroid Phantom Used in Occupational Monitoring” (Health Physics Society 2014) has been published. The standard establishes the criteria for acceptable design, fabrication, or modeling of a phantom suitable for calibrating in vivo monitoring systems to measure photon-emitting radionuclides deposited in the thyroid. The current thyroid phantom standard was drafted in 1973 (ANSI N44.3-1973), last reviewed in 1984, and a revision of the standard to cover a more modern approach was deemed warranted.

SLRV Engineering Tests at Department of Transportation, Transportation Test Center : Volume 4. Data Logs.

DOT National Transportation Integrated Search

1979-02-01

The SLRV (Standard Light Rail Vehicle) is a 71-foot vehicle, articulated to negotiate curves down to a 32-foot radius and designed to operate at speeds up to 50 mph. Although the basic configuration and performance is standardized, the current operat...

SLRV Engineering Tests at Department of Transportation Transportation Test Center : Volume 2. Performance and Power Consumption Tests.

DOT National Transportation Integrated Search

1979-02-01

The SLRV (Standard Light Rail Vehicle) is a 71-foot vehicle, articulated to negotiate curves down to 32-foot radius and designed to operate at speeds up to 50 mph. Although the basic configuration and performance is standardized, the current operatin...

The International Learning Object Metadata Survey

ERIC Educational Resources Information Center

Friesen, Norm

2004-01-01

A wide range of projects and organizations is currently making digital learning resources (learning objects) available to instructors, students, and designers via systematic, standards-based infrastructures. One standard that is central to many of these efforts and infrastructures is known as Learning Object Metadata (IEEE 1484.12.1-2002, or LOM).…

Scan posture definition and hip girth measurement: the impact on clothing design and body scanning.

PubMed

Gill, Simeon; Parker, Christopher J

2017-08-01

Ergonomic measurement is central to product design and development; especially for body worn products and clothing. However, there is a large variation in measurement definitions, complicated by new body scanning technology that captures measurements in a posture different to traditional manual methods. Investigations of hip measurement definitions in current clothing measurement practices supports analysis of the effect of scan posture and hip measurement definition on the circumferences of the hip. Here, the hip girth is a key clothing measurement that is not defined in current body scanning measurement standards. Sixty-four participants were scanned in the standard scan posture of a [TC] 2 body scanner, and also in a natural posture similar to that of traditional manual measurement collection. Results indicate that scan posture affects hip girth circumferences, and that some current clothing measurement practices may not define the largest lower body circumference. Recommendations are made concerning how the hip is defined in measurement practice and within body scanning for clothing product development. Practitioner Summary: The hip girth is an important measurement in garment design, yet its measurement protocol is not currently defined. We demonstrate that body posture during body scanning affects hip circumferences, and that current clothing measurement practices may not define the largest lower body circumference. This paper also provides future measurement practice recommendations.

Space debris mitigation - engineering strategies

NASA Astrophysics Data System (ADS)

Taylor, E.; Hammond, M.

The problem of space debris pollution is acknowledged to be of growing concern by space agencies, leading to recent activities in the field of space debris mitigation. A review of the current (and near-future) mitigation guidelines, handbooks, standards and licensing procedures has identified a number of areas where further work is required. In order for space debris mitigation to be implemented in spacecraft manufacture and operation, the authors suggest that debris-related criteria need to become design parameters (following the same process as applied to reliability and radiation). To meet these parameters, spacecraft manufacturers and operators will need processes (supported by design tools and databases and implementation standards). A particular aspect of debris mitigation, as compared with conventional requirements (e.g. radiation and reliability) is the current and near-future national and international regulatory framework and associated liability aspects. A framework for these implementation standards is presented, in addition to results of in-house research and development on design tools and databases (including collision avoidance in GTO and SSTO and evaluation of failure criteria on composite and aluminium structures).

Alternating-Current Equipment for the Measurement of Fluctuations of Air Speed in Turbulent Flow

NASA Technical Reports Server (NTRS)

Mock, W C , Jr

1937-01-01

Recent electrical and mechanical improvements have been made in the equipment developed at the National Bureau of Standards for measurement of fluctuations of air speed in turbulent flow. Data useful in the design of similar equipment are presented. The design of rectified alternating-current power supplies for such apparatus is treated briefly, and the effect of the power supplies on the performance of the equipment is discussed.

78 FR 40958 - Amendment of Restricted Areas R-2504A & R-2504B; Camp Roberts, CA, and Restricted Area R-2530...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-09

...-2504B currently reads ``0600 to 2400 PST, daily'' and the time of designation for R-2530 currently reads...-2400 local time, daily, during both standard time and daylight saving time periods and for R-2530 is... time of designation is amended to read ``0600 to 2400 local time, daily'' for R-2504A and R-2504B and...

[Treatment of asymptomatic carotid artery stenosis: improvement of evidence with new SPACE-2 design necessary].

PubMed

Reiff, T; Amiri, H; Ringleb, P A; Jansen, O; Hacke, W; Eckstein, H H; Fraedrich, G; Mudra, H; Mansmann, U

2013-12-01

Asymptomatic carotid artery stenosis may be treated with carotid endarterectomy (CEA), carotid artery stenting (CAS) or with best medical treatment (BMT) only. Definitive and evidence-based treatment recommendations for one of these options are currently not possible. Studies showing an advantage of CEA over BMT alone do not meet current standards from a pharmacological point of view. On the other hand, more recent data point to a further stroke risk reduction using BMT according to current standards. Studies on carotid artery stenting as a third alternative treatment are partially insufficient, especially when comparing CAS with BMT. Initiated in 2009, the randomized, controlled, multicenter SPACE-2 trial is intended to answer the question about the best treatment option of asymptomatic carotid artery stenosis; however, to increase recruitment rates as a condition for the successful completion of this important study, the trial design had to be modified.

Development of standardized specifications for silicon solar cells

NASA Technical Reports Server (NTRS)

Scott-Monck, J. A.

1977-01-01

A space silicon solar cell assembly (cell and coverglass) specification aimed at standardizing the diverse requirements of current cell or assembly specifications was developed. This specification was designed to minimize both the procurement and manufacturing costs for space qualified silicon solar cell assembilies. In addition, an impact analysis estimating the technological and economic effects of employing a standardized space silicon solar cell assembly was performed.

CALiPER Snapshot Report: Troffers

DOE Office of Scientific and Technical Information (OSTI.GOV)

None, None

2016-12-01

Snapshot reports use data from DOE's LED Lighting Facts product list to compare the LED performance to standard technologies, and are designed to help lighting retailers, distributors, designers, utilities, energy efficiency program sponsors, and other stakeholders understand the current state of the LED market and its trajectory.

Designing and evaluating symbols for electronic displays of navigation information : symbol stereotypes and symbol-feature rules

DOT National Transportation Integrated Search

2005-09-30

There is currently no common symbology standard for the electronic display of navigation information. The wide range of display technology and the different functions these displays support makes it difficult to design symbols that are easily recogni...

CALiPER Snapshot Report: Industrial Luminaires

DOE Office of Scientific and Technical Information (OSTI.GOV)

None, None

2017-03-01

Snapshot reports use data from DOE's LED Lighting Facts product list to compare the LED performance to standard technologies, and are designed to help lighting retailers, distributors, designers, utilities, energy efficiency program sponsors, and other stakeholders understand the current state of the LED market and its trajectory.

Code JEF Facilities Engineering Home Page for the Internet

NASA Technical Reports Server (NTRS)

Mahaffey, Valerie A.; Harrison, Marla J. (Technical Monitor)

1995-01-01

There are always many activities going on in JEF. We work on and manage the Construction of Facilities (C of F) projects at NASA-Ames. We are constantly designing or analyzing a new facility or project, or a modification to an existing facility. Every day we answer numerous questions about engineering policy, codes and standards, we attend design reviews, we count dollars and we make sure that everything at the Center is designed and built according to good engineering judgment. In addition, we study literature and attend conferences to make sure that we keep current on new legislation and standards.

Gearbox Reliability Collaborative Phase 3 Gearbox 2 Test Plan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Link, H.; Keller, J.; Guo, Y.

2013-04-01

Gearboxes in wind turbines have not been achieving their expected design life even though they commonly meet or exceed the design criteria specified in current design standards. One of the basic premises of the National Renewable Energy Laboratory (NREL) Gearbox Reliability Collaborative (GRC) is that the low gearbox reliability results from the absence of critical elements in the design process or insufficient design tools. Key goals of the GRC are to improve design approaches and analysis tools and to recommend practices and test methods resulting in improved design standards for wind turbine gearboxes that lower the cost of energy (COE)more » through improved reliability. The GRC uses a combined gearbox testing, modeling and analysis approach, along with a database of information from gearbox failures collected from overhauls and investigation of gearbox condition monitoring techniques to improve wind turbine operations and maintenance practices. Testing of Gearbox 2 (GB2) using the two-speed turbine controller that has been used in prior testing. This test series will investigate non-torque loads, high-speed shaft misalignment, and reproduction of field conditions in the dynamometer. This test series will also include vibration testing using an eddy-current brake on the gearbox's high speed shaft.« less

Anthropometric Procedures for Protective Equipment Sizing and Design

PubMed Central

Hsiao, Hongwei

2015-01-01

Objectives This article presented four anthropometric theories (univariate, bivariate/probability distribution, multivariate, and shape-based methods) for protective equipment design decisions. Background While the significance of anthropometric information for product design is well recognized, designers continue to face challenges in selecting efficient anthropometric data processing methods and translating the acquired information into effective product designs. Methods For this study, 100 farm tractor operators, 3,718 respirator users, 951 firefighters, and 816 civilian workers participated in four studies on the design of tractor roll-over protective structures (ROPS), respirator test panels, fire truck cabs, and fall-arrest harnesses, respectively. Their anthropometry and participant-equipment interfaces were evaluated. Results Study 1 showed a need to extend the 90-cm vertical clearance for tractor ROPS in the current industrial standards to 98.3 to 101.3 cm. Study 2 indicated that current respirator test panel would have excluded 10% of the male firefighter population; a systematic adjustment to the boundaries of test panel cells was suggested. Study 3 provided 24 principal component analysis-based firefighter body models to facilitate fire truck cab design. Study 4 developed an improved gender-based fall-arrest harness sizing scheme to supplant the current unisex system. Conclusions This article presented four anthropometric approaches and a six-step design paradigm for ROPS, respirator test panel, fire truck cab, and fall-arrest harness applications, which demonstrated anthropometric theories and practices for defining protective equipment fit and sizing schemes. Applications The study provided a basis for equipment designers, standards writers, and industry manufacturers to advance anthropometric applications for product design and improve product efficacy. PMID:23516791

Discovery and analysis of time delay sources in the USGS personal computer data collection platform (PCDCP) system

USGS Publications Warehouse

White, Timothy C.; Sauter, Edward A.; Stewart, Duff C.

2014-01-01

Intermagnet is an international oversight group which exists to establish a global network for geomagnetic observatories. This group establishes data standards and standard operating procedures for members and prospective members. Intermagnet has proposed a new One-Second Data Standard, for that emerging geomagnetic product. The standard specifies that all data collected must have a time stamp accuracy of ±10 milliseconds of the top-of-the-second Coordinated Universal Time. Therefore, the U.S. Geological Survey Geomagnetism Program has designed and executed several tests on its current data collection system, the Personal Computer Data Collection Platform. Tests are designed to measure the time shifts introduced by individual components within the data collection system, as well as to measure the time shift introduced by the entire Personal Computer Data Collection Platform. Additional testing designed for Intermagnet will be used to validate further such measurements. Current results of the measurements showed a 5.0–19.9 millisecond lag for the vertical channel (Z) of the Personal Computer Data Collection Platform and a 13.0–25.8 millisecond lag for horizontal channels (H and D) of the collection system. These measurements represent a dynamically changing delay introduced within the U.S. Geological Survey Personal Computer Data Collection Platform.

CALiPER Snapshot Report: Outdoor Area Lighting

DOE Office of Scientific and Technical Information (OSTI.GOV)

None, None

2016-09-30

Snapshot reports use data from DOE's LED Lighting Facts product list to compare the LED performance to standard technologies, and are designed to help lighting retailers, distributors, designers, utilities, energy efficiency program sponsors, and other stakeholders understand the current state of the LED market and its trajectory.

Laboratory performance evaluation of CIR-emulsion and its comparison against CIR-foam test results from phase III.

DOT National Transportation Integrated Search

2009-12-01

Currently, no standard mix design procedure is available for CIR-emulsion in Iowa. The CIR-foam mix : design process developed during the previous phase is applied for CIR-emulsion mixtures with varying : emulsified asphalt contents. Dynamic modulus ...

CALiPER Snapshot Report: Outdoor Area Lighting - 2017

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2017-09-29

Snapshot reports use data from DOE's LED Lighting Facts product list to compare the LED performance to standard technologies, and are designed to help lighting retailers, distributors, designers, utilities, energy efficiency program sponsors, and other stakeholders understand the current state of the LED market and its trajectory.

Ambulance Design Survey 2011: A Summary Report

PubMed Central

Lee, Y Tina; Kibira, Deogratias; Feeney, Allison Barnard; Marshall, Jennifer

2013-01-01

Current ambulance designs are ergonomically inefficient and often times unsafe for practical treatment response to medical emergencies. Thus, the patient compartment of a moving ambulance is a hazardous working environment. As a consequence, emergency medical services (EMS) workers suffer fatalities and injuries that far exceed those of the average work place in the United States. To reduce injury and mortality rates in ambulances, the Department of Homeland Security Science and Technology Directorate has teamed with the National Institute of Standards and Technology, the National Institute for Occupational Safety and Health, and BMT Designers & Planners in a joint project to produce science-based ambulance patient compartment design standards. This project will develop new crash-safety design standards and improved user-design interface guidance for patient compartments that are safer for EMS personnel and patients, and facilitate improved patient care. The project team has been working with practitioners, EMS workers’ organizations, and manufacturers to solicit needs and requirements to address related issues. This paper presents an analysis of practitioners’ concerns, needs, and requirements for improved designs elicited through the web-based survey of ambulance design, held by the National Institute of Standards and Technology. This paper also introduces the survey, analyzes the survey results, and discusses recommendations for future ambulance patient compartments design. PMID:26401439

The Lom Approach--a Call for Concern?

ERIC Educational Resources Information Center

Armitage, Nicholas; Bowerman, Chris

2005-01-01

The LOM (Learning Object Model) approach to courseware design seems to be driven by a desire to increase access to education as well as use technology to enable a higher staff-student ratio than is currently possible. The LOM standard involves the use of standard metadata descriptions of content and adaptive content engines to deliver the…

The LOM Approach -- A CALL for Concern?

ERIC Educational Resources Information Center

Armitage, Nicholas; Bowerman, Chris

2005-01-01

The LOM (Learning Object Model) approach to courseware design seems to be driven by a desire to increase access to education as well as use technology to enable a higher staff-student ratio than is currently possible. The LOM standard involves the use of standard metadata descriptions of content and adaptive content engines to deliver the…

Emergency Medical Technician-Ambulance: National Standard Curriculum. Student Study Guide (Third Edition).

ERIC Educational Resources Information Center

National Highway Traffic Safety Administration (DOT), Washington, DC.

This student study guide is one of three documents prepared for the Emergency Medical Technician (EMT), National Standard Curriculum. The course is designed to develop skills in symptom recognition and in all emergency care procedures and techniques currently considered to be within the responsibilities of an EMT providing emergency medical care…

SLRV Engineering Tests at Department of Transportation Transportation Test Center : Volume 3. Ride Quality, Noise, and Radio Frequency Interference ..

DOT National Transportation Integrated Search

1979-02-01

The SLRV (Standard Light Rail Vehicle) is a 71-foot vehicle, articulated to negotiate curves down to a 32-foot radius and designed to operate at speeds up to 50 mph. Although the basic configuration and performance is standardized, the current operat...

Mind the Gap: Accounting Information Systems Curricula Development in Compliance with IFAC Standards in a Developing Country

ERIC Educational Resources Information Center

Aleqab, Mahmoud Mohmad Ahmad; Nurunnabi, Mohammad; Adel, Dalia

2015-01-01

The authors examine the consistency between the current practices in designing and teaching accounting information systems (AIS) curricula and the International Federation of Accountants (IFAC) requirements for International Education Practice Statement 2 and International Education Standards 2. Utilizing a survey and interviews data in Jordan,…

Writing Instruction in First Grade: An Observational Study

ERIC Educational Resources Information Center

Coker, David L., Jr.; Farley-Ripple, Elizabeth; Jackson, Allison F.; Wen, Huijing; MacArthur, Charles A.; Jennings, Austin S.

2016-01-01

As schools work to meet the ambitious Common Core State Standards in writing (Common Core State Standards Initiation, 2010), instructional approaches are likely to be examined. However, there is little research that describes the current state of instruction. This study was designed to expand the empirical base on writing instruction in first…

Design of experiments enhanced statistical process control for wind tunnel check standard testing

NASA Astrophysics Data System (ADS)

Phillips, Ben D.

The current wind tunnel check standard testing program at NASA Langley Research Center is focused on increasing data quality, uncertainty quantification and overall control and improvement of wind tunnel measurement processes. The statistical process control (SPC) methodology employed in the check standard testing program allows for the tracking of variations in measurements over time as well as an overall assessment of facility health. While the SPC approach can and does provide researchers with valuable information, it has certain limitations in the areas of process improvement and uncertainty quantification. It is thought by utilizing design of experiments methodology in conjunction with the current SPC practices that one can efficiently and more robustly characterize uncertainties and develop enhanced process improvement procedures. In this research, methodologies were developed to generate regression models for wind tunnel calibration coefficients, balance force coefficients and wind tunnel flow angularities. The coefficients of these regression models were then tracked in statistical process control charts, giving a higher level of understanding of the processes. The methodology outlined is sufficiently generic such that this research can be applicable to any wind tunnel check standard testing program.

Green Book

EPA Pesticide Factsheets

Areas of the country where air pollution levels persistently exceed the national ambient air quality standards may be designated nonattainment. This site provides current information on nonattainment areas by state and pollutant.

75 FR 2122 - Additional Guidance Regarding Application of Current Procedures for Testing Energy Consumption of...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-14

... prescribed or amended under this section shall be reasonably designed to produce test results which measure... Energy's (DOE) guidance to ensure the consistent application of DOE's current test procedure to...) to prescribe standardized test procedures to measure the energy consumption of certain consumer...

Design techniques for low-voltage analog integrated circuits

NASA Astrophysics Data System (ADS)

Rakús, Matej; Stopjaková, Viera; Arbet, Daniel

2017-08-01

In this paper, a review and analysis of different design techniques for (ultra) low-voltage integrated circuits (IC) are performed. This analysis shows that the most suitable design methods for low-voltage analog IC design in a standard CMOS process include techniques using bulk-driven MOS transistors, dynamic threshold MOS transistors and MOS transistors operating in weak or moderate inversion regions. The main advantage of such techniques is that there is no need for any modification of standard CMOS structure or process. Basic circuit building blocks like differential amplifiers or current mirrors designed using these approaches are able to operate with the power supply voltage of 600 mV (or even lower), which is the key feature towards integrated systems for modern portable applications.

Very high speed integrated circuits - Into the second generation. V - The issues of standardization and technology insertion

NASA Astrophysics Data System (ADS)

Martin, J.

1982-04-01

It is shown that the fulfillment of very high speed integrated circuit (VHSIC) device development goals entails the restructuring of military electronics acquisition policy, standardization which produces the maximum number of systems and subsystems by means of the minimum number of flexible, broad-purpose, high-power semiconductors, and especially the standardization of bus structures incorporating a priorization system. It is expected that the Design Specification Handbook currently under preparation by the VHSIC program office of the DOD will make the design of such systems a task whose complexity is comparable to that of present integrated circuit electronics.

Standards Development Activities at White Sands Test Facility

NASA Technical Reports Server (NTRS)

Baker, D. L.; Beeson, H. D.; Saulsberry, R. L.; Julien, H. L.; Woods, S. S.

2003-01-01

The development of standards and standard activities at the JSC White Sands Test Facility (WSTF) has been expanded to include the transfer of technology and standards to voluntary consensus organizations in five technical areas of importance to NASA. This effort is in direct response to the National Technology Transfer Act designed to accelerate transfer of technology to industry and promote government-industry partnerships. Technology transfer is especially important for WSTF, whose longterm mission has been to develop and provide vital propellant safety and hazards information to aerospace designers, operations personnel, and safety personnel. Meeting this mission is being accomplished through the preparation of consensus guidelines and standards, propellant hazards analysis protocols, and safety courses for the propellant use of hydrogen, oxygen, and hypergols, as well as the design and inspection of spacecraft pressure vessels and the use of pyrovalves in spacecraft propulsion systems. The overall WSTF technology transfer program is described and the current status of technology transfer activities are summarized.

Developing safety performance functions incorporating reliability-based risk measures.

PubMed

Ibrahim, Shewkar El-Bassiouni; Sayed, Tarek

2011-11-01

Current geometric design guides provide deterministic standards where the safety margin of the design output is generally unknown and there is little knowledge of the safety implications of deviating from these standards. Several studies have advocated probabilistic geometric design where reliability analysis can be used to account for the uncertainty in the design parameters and to provide a risk measure of the implication of deviation from design standards. However, there is currently no link between measures of design reliability and the quantification of safety using collision frequency. The analysis presented in this paper attempts to bridge this gap by incorporating a reliability-based quantitative risk measure such as the probability of non-compliance (P(nc)) in safety performance functions (SPFs). Establishing this link will allow admitting reliability-based design into traditional benefit-cost analysis and should lead to a wider application of the reliability technique in road design. The present application is concerned with the design of horizontal curves, where the limit state function is defined in terms of the available (supply) and stopping (demand) sight distances. A comprehensive collision and geometric design database of two-lane rural highways is used to investigate the effect of the probability of non-compliance on safety. The reliability analysis was carried out using the First Order Reliability Method (FORM). Two Negative Binomial (NB) SPFs were developed to compare models with and without the reliability-based risk measures. It was found that models incorporating the P(nc) provided a better fit to the data set than the traditional (without risk) NB SPFs for total, injury and fatality (I+F) and property damage only (PDO) collisions. Copyright © 2011 Elsevier Ltd. All rights reserved.

16 CFR 18.4 - Size and grade designations.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Size and grade designations. 18.4 Section 18.4 Commercial Practices FEDERAL TRADE COMMISSION GUIDES AND TRADE PRACTICE RULES GUIDES FOR THE... consensus of the industry that the grade and size standard set forth in the current edition of American...

A Standardized Rubric for Evaluating Webquest Design: Reliability Analysis of ZUNAL Webquest Design Rubric

ERIC Educational Resources Information Center

Unal, Zafer; Bodur, Yasar; Unal, Aslihan

2012-01-01

Current literature provides many examples of rubrics that are used to evaluate the quality of web-quest designs. However, reliability of these rubrics has not yet been researched. This is the first study to fully characterize and assess the reliability of a webquest evaluation rubric. The ZUNAL rubric was created to utilize the strengths of the…

Rotational Critique System as a Method of Culture Change in an Architecture Design Studio: Urban Design Studio as Case Study

ERIC Educational Resources Information Center

Fasli, Mukaddes; Hassanpour, Badiossadat

2017-01-01

In this century, all educational efforts strive to achieve quality assurance standards. Therefore, it will be naive to deny the existence of problems in architectural education. The current design studio critique method has been developed upon generations of students and educators. Architectural education is changing towards educating critical…

Designing display primaries with currently available light sources for UHDTV wide-gamut system colorimetry.

PubMed

Masaoka, Kenichiro; Nishida, Yukihiro; Sugawara, Masayuki

2014-08-11

The wide-gamut system colorimetry has been standardized for ultra-high definition television (UHDTV). The chromaticities of the primaries are designed to lie on the spectral locus to cover major standard system colorimetries and real object colors. Although monochromatic light sources are required for a display to perfectly fulfill the system colorimetry, highly saturated emission colors using recent quantum dot technology may effectively achieve the wide gamut. This paper presents simulation results on the chromaticities of highly saturated non-monochromatic light sources and gamut coverage of real object colors to be considered in designing wide-gamut displays with color filters for the UHDTV.

Robust Engineering Designs for Infrastructure Adaptation to a Changing Climate

NASA Astrophysics Data System (ADS)

Samaras, C.; Cook, L.

2015-12-01

Infrastructure systems are expected to be functional, durable and safe over long service lives - 50 to over 100 years. Observations and models of climate science show that greenhouse gas emissions resulting from human activities have changed climate, weather and extreme events. Projections of future changes (albeit with uncertainties caused by inadequacies of current climate/weather models) can be made based on scenarios for future emissions, but actual future emissions are themselves uncertain. Most current engineering standards and practices for infrastructure assume that the probabilities of future extreme climate and weather events will match those of the past. Climate science shows that this assumption is invalid, but is unable, at present, to define these probabilities over the service lives of existing and new infrastructure systems. Engineering designs, plans, and institutions and regulations will need to be adaptable for a range of future conditions (conditions of climate, weather and extreme events, as well as changing societal demands for infrastructure services). For their current and future projects, engineers should: Involve all stakeholders (owners, financers, insurance, regulators, affected public, climate/weather scientists, etc.) in key decisions; Use low regret, adaptive strategies, such as robust decision making and the observational method, comply with relevant standards and regulations, and exceed their requirements where appropriate; Publish design studies and performance/failure investigations to extend the body of knowledge for advancement of practice. The engineering community should conduct observational and modeling research with climate/weather/social scientists and the concerned communities and account rationally for climate change in revised engineering standards and codes. This presentation presents initial research on decisionmaking under uncertainty for climate resilient infrastructure design.

ASME Nuclear Crane Standards for Enhanced Crane Safety and Increased Profit

NASA Astrophysics Data System (ADS)

Parkhurst, Stephen N.

2000-01-01

The ASME NOG-1 standard, 'Rules for Construction of Overhead and Gantry Cranes', covers top running cranes for nuclear facilities; with the ASME NUM-1 standard, 'Rules for Construction of Cranes, Monorails, and Hoists', covering the single girder, underhung, wall and jib cranes, as well as the monorails and hoists. These two ASME nuclear crane standards provide criteria for designing, inspecting and testing overhead handling equipment with enhanced safety to meet the 'defense-in-depth' approach of the United States Nuclear Regulatory Commission (USNRC) documents NUREG 0554 and NUREG 0612. In addition to providing designs for enhanced safety, the ASME nuclear crane standards provide a basis for purchasing overhead handling equipment with standard safety features, based upon accepted engineering principles, and including performance and environmental parameters specific to nuclear facilities. The ASME NOG-1 and ASME NUM-1 standards not only provide enhanced safety for handling a critical load, but also increase profit by minimizing the possibility of load drops, by reducing cumbersome operating restrictions, and by providing the foundation for a sound licensing position. The ASME nuclear crane standards can also increase profit by providing the designs and information to help ensure that the right standard equipment is purchased. Additionally, the ASME nuclear crane standards can increase profit by providing designs and information to help address current issues, such as the qualification of nuclear plant cranes for making 'planned engineered lifts' for steam generator replacement and decommissioning.

An examination of effect estimation in factorial and standardly-tailored designs

PubMed Central

Allore, Heather G; Murphy, Terrence E

2012-01-01

Background Many clinical trials are designed to test an intervention arm against a control arm wherein all subjects are equally eligible for all interventional components. Factorial designs have extended this to test multiple intervention components and their interactions. A newer design referred to as a ‘standardly-tailored’ design, is a multicomponent interventional trial that applies individual interventional components to modify risk factors identified a priori and tests whether health outcomes differ between treatment arms. Standardly-tailored designs do not require that all subjects be eligible for every interventional component. Although standardly-tailored designs yield an estimate for the net effect of the multicomponent intervention, it has not yet been shown if they permit separate, unbiased estimation of individual component effects. The ability to estimate the most potent interventional components has direct bearing on conducting second stage translational research. Purpose We present statistical issues related to the estimation of individual component effects in trials of geriatric conditions using factorial and standardly-tailored designs. The medical community is interested in second stage translational research involving the transfer of results from a randomized clinical trial to a community setting. Before such research is undertaken, main effects and synergistic and or antagonistic interactions between them should be identified. Knowledge of the relative strength and direction of the effects of the individual components and their interactions facilitates the successful transfer of clinically significant findings and may potentially reduce the number of interventional components needed. Therefore the current inability of the standardly-tailored design to provide unbiased estimates of individual interventional components is a serious limitation in their applicability to second stage translational research. Methods We discuss estimation of individual component effects from the family of factorial designs and this limitation for standardly-tailored designs. We use the phrase ‘factorial designs’ to describe full-factorial designs and their derivatives including the fractional factorial, partial factorial, incomplete factorial and modified reciprocal designs. We suggest two potential directions for designing multicomponent interventions to facilitate unbiased estimates of individual interventional components. Results Full factorial designs and their variants are the most common multicomponent trial design described in the literature and differ meaningfully from standardly-tailored designs. Factorial and standardly-tailored designs result in similar estimates of net effect with different levels of precision. Unbiased estimation of individual component effects from a standardly-tailored design will require new methodology. Limitations Although clinically relevant in geriatrics, previous applications of standardly-tailored designs have not provided unbiased estimates of the effects of individual interventional components. Discussion Future directions to estimate individual component effects from standardly-tailored designs include applying D-optimal designs and creating independent linear combinations of risk factors analogous to factor analysis. Conclusion Methods are needed to extract unbiased estimates of the effects of individual interventional components from standardly-tailored designs. PMID:18375650

75 FR 76185 - Federal Motor Vehicle Safety Standard, Rearview Mirrors; Federal Motor Vehicle Safety Standard...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-07

... Simulation D. Comparative Regulatory Requirements i. Current FMVSS No. 111 ii. Relevant European Regulations... specifically-defined type of incident in which a non-occupant of a vehicle (most commonly, a pedestrian, but it...-speed vehicle or trailer, designed to carry 10 persons or less which is constructed either on a truck...

Mind the Gap! Students' Use of Exemplars and Detailed Rubrics as Formative Assessment

ERIC Educational Resources Information Center

Lipnevich, Anastasiya A.; McCallen, Leigh N.; Miles, Katharine Pace; Smith, Jeffrey K.

2014-01-01

The current study examined efficient modes for providing standardized feedback to improve performance on an assignment for a second year college class involving writing a brief research proposal. Two forms of standardized feedback (detailed rubric and proposal exemplars) were utilized is an experimental design with undergraduate students (N = 100)…

How Have State Level Standards-Based Tests Related to Norm-Referenced Tests in Alaska?.

ERIC Educational Resources Information Center

Fenton, Ray

This overview of the Alaska system for test development, scoring, and reporting explored differences and similarities between norm-referenced and standards-based tests. The current Alaska testing program is based on legislation passed in 1997 and 1998, and is designed to meet the requirements of the federal No Child Left Behind Legislation. In…

Study on Standard Fatigue Vehicle Load Model

NASA Astrophysics Data System (ADS)

Huang, H. Y.; Zhang, J. P.; Li, Y. H.

2018-02-01

Based on the measured data of truck from three artery expressways in Guangdong Province, the statistical analysis of truck weight was conducted according to axle number. The standard fatigue vehicle model applied to industrial areas in the middle and late was obtained, which adopted equivalence damage principle, Miner linear accumulation law, water discharge method and damage ratio theory. Compared with the fatigue vehicle model Specified by the current bridge design code, the proposed model has better applicability. It is of certain reference value for the fatigue design of bridge in China.

Does nonstationarity in rainfall require nonstationary intensity-duration-frequency curves?

NASA Astrophysics Data System (ADS)

Ganguli, Poulomi; Coulibaly, Paulin

2017-12-01

In Canada, risk of flooding due to heavy rainfall has risen in recent decades; the most notable recent examples include the July 2013 storm in the Greater Toronto region and the May 2017 flood of the Toronto Islands. We investigate nonstationarity and trends in the short-duration precipitation extremes in selected urbanized locations in Southern Ontario, Canada, and evaluate the potential of nonstationary intensity-duration-frequency (IDF) curves, which form an input to civil infrastructural design. Despite apparent signals of nonstationarity in precipitation extremes in all locations, the stationary vs. nonstationary models do not exhibit any significant differences in the design storm intensity, especially for short recurrence intervals (up to 10 years). The signatures of nonstationarity in rainfall extremes do not necessarily imply the use of nonstationary IDFs for design considerations. When comparing the proposed IDFs with current design standards, for return periods (10 years or less) typical for urban drainage design, current design standards require an update of up to 7 %, whereas for longer recurrence intervals (50-100 years), ideal for critical civil infrastructural design, updates ranging between ˜ 2 and 44 % are suggested. We further emphasize that the above findings need re-evaluation in the light of climate change projections since the intensity and frequency of extreme precipitation are expected to intensify due to global warming.

Risk-targeted versus current seismic design maps for the conterminous United States

USGS Publications Warehouse

Luco, Nicolas; Ellingwood, Bruce R.; Hamburger, Ronald O.; Hooper, John D.; Kimball, Jeffrey K.; Kircher, Charles A.

2007-01-01

The probabilistic portions of the seismic design maps in the NEHRP Provisions (FEMA, 2003/2000/1997), and in the International Building Code (ICC, 2006/2003/2000) and ASCE Standard 7-05 (ASCE, 2005a), provide ground motion values from the USGS that have a 2% probability of being exceeded in 50 years. Under the assumption that the capacity against collapse of structures designed for these "uniformhazard" ground motions is equal to, without uncertainty, the corresponding mapped value at the location of the structure, the probability of its collapse in 50 years is also uniform. This is not the case however, when it is recognized that there is, in fact, uncertainty in the structural capacity. In that case, siteto-site variability in the shape of ground motion hazard curves results in a lack of uniformity. This paper explains the basis for proposed adjustments to the uniform-hazard portions of the seismic design maps currently in the NEHRP Provisions that result in uniform estimated collapse probability. For seismic design of nuclear facilities, analogous but specialized adjustments have recently been defined in ASCE Standard 43-05 (ASCE, 2005b). In support of the 2009 update of the NEHRP Provisions currently being conducted by the Building Seismic Safety Council (BSSC), herein we provide examples of the adjusted ground motions for a selected target collapse probability (or target risk). Relative to the probabilistic MCE ground motions currently in the NEHRP Provisions, the risk-targeted ground motions for design are smaller (by as much as about 30%) in the New Madrid Seismic Zone, near Charleston, South Carolina, and in the coastal region of Oregon, with relatively little (<15%) change almost everywhere else in the conterminous U.S.

SNL/CA Facilities Management Design Standards Manual

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rabb, David; Clark, Eva

2014-12-01

At Sandia National Laboratories in California (SNL/CA), the design, construction, operation, and maintenance of facilities is guided by industry standards, a graded approach, and the systematic analysis of life cycle benefits received for costs incurred. The design of the physical plant must ensure that the facilities are "fit for use," and provide conditions that effectively, efficiently, and safely support current and future mission needs. In addition, SNL/CA applies sustainable design principles, using an integrated whole-building design approach, from site planning to facility design, construction, and operation to ensure building resource efficiency and the health and productivity of occupants. The safetymore » and health of the workforce and the public, any possible effects on the environment, and compliance with building codes take precedence over project issues, such as performance, cost, and schedule.« less

Joint DoD Standardization and Data/Configuration Management Conference (1991) Conducting Business Under the DMR

DTIC Science & Technology

1991-05-17

items. These drawings represent the highest level of design disclo- sure. 4. APPROVAL DATE 5. OFFICE OF PRIMARY RESPONSIBILITY (OPR) 6a. DTIC APPLICABLE...the contract or purchase order. Product drawings and associated lists shall provide the design disclosure information necessary to enable a...performance characteristics duplicate those of the original design . These drawings shall: a. Reflect the end-product at its current level of design

Microbeads and Engineering Design in Chemistry: No Small Educational Investigation

ERIC Educational Resources Information Center

Hoffman, Adam; Turner, Ken

2015-01-01

A multipart laboratory activity introducing microbeads was created to meet engineering and engineering design practices consistent with new Next Generation Science Standards (NGSS). Microbeads are a current topic of concern as they have been found to cause adverse impacts in both marine and freshwater systems resulting in multiple states proposing…

Perceived Uncertainty Sources in Wind Power Plant Design

DOE Office of Scientific and Technical Information (OSTI.GOV)

Damiani, Rick R

This presentation for the Fourth Wind Energy Systems Engineering Workshop covers some of the uncertainties that still impact turbulent wind operation and how these affect design and structural reliability; identifies key sources and prioritization for R and D; and summarizes an analysis of current procedures, industry best practice, standards, and expert opinions.

Developing a User Oriented Design Methodology for Learning Activities Using Boundary Objects

ERIC Educational Resources Information Center

Fragou, ?lga; Kameas, Achilles

2013-01-01

International Standards in High and Open and Distance Education are used for developing Open Educational Resources (OERs). Current issues in e-learning community are the specification of learning chunks and the definition of describing designs for different units of learning (activities, units, courses) in a generic though expandable format.…

77 FR 16435 - Transmission Relay Loadability Reliability Standard

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-21

... are designed to read electrical measurements, such as current, voltage, and frequency, and can be set... an element of the system under its protection, it sends a signal to an interrupting device(s) (such... their relays according to one of thirteen specific settings (sub-parts R1.1 through R1.13) designed to...

49 CFR 571.135 - Standard No. 135; Light vehicle brake systems.

Code of Federal Regulations, 2012 CFR

2012-10-01

... portable sources of electrical current, and which may include a non-electrical source of power designed to... or more subsystems actuated by a single control, designed so that a single failure in any subsystem....2.1. Pavement friction. Unless otherwise specified, the road test surface produces a peak friction...

49 CFR 571.135 - Standard No. 135; Light vehicle brake systems.

Code of Federal Regulations, 2014 CFR

2014-10-01

... portable sources of electrical current, and which may include a non-electrical source of power designed to... or more subsystems actuated by a single control, designed so that a single failure in any subsystem....2.1. Pavement friction. Unless otherwise specified, the road test surface produces a peak friction...

49 CFR 571.105 - Standard No. 105; Hydraulic and electric brake systems.

Code of Federal Regulations, 2010 CFR

2010-10-01

... current, and which may include a non-electrical source of power designed to charge batteries and... dissipating electrical energy. Skid number means the frictional resistance of a pavement measured in... subsystems actuated by a single control, designed so that a single failure in any subsystem (such as a...

49 CFR 571.135 - Standard No. 135; Light vehicle brake systems.

Code of Federal Regulations, 2013 CFR

2013-10-01

... portable sources of electrical current, and which may include a non-electrical source of power designed to... or more subsystems actuated by a single control, designed so that a single failure in any subsystem....2.1. Pavement friction. Unless otherwise specified, the road test surface produces a peak friction...

49 CFR 571.105 - Standard No. 105; Hydraulic and electric brake systems.

Code of Federal Regulations, 2014 CFR

2014-10-01

... current, and which may include a non-electrical source of power designed to charge batteries and... dissipating electrical energy. Skid number means the frictional resistance of a pavement measured in..., designed so that a single failure in any subsystem (such as a leakage-type failure of a pressure component...

49 CFR 571.135 - Standard No. 135; Light vehicle brake systems.

Code of Federal Regulations, 2010 CFR

2010-10-01

... portable sources of electrical current, and which may include a non-electrical source of power designed to... or more subsystems actuated by a single control, designed so that a single failure in any subsystem....2.1. Pavement friction. Unless otherwise specified, the road test surface produces a peak friction...

49 CFR 571.135 - Standard No. 135; Light vehicle brake systems.

Code of Federal Regulations, 2011 CFR

2011-10-01

... portable sources of electrical current, and which may include a non-electrical source of power designed to... or more subsystems actuated by a single control, designed so that a single failure in any subsystem....2.1. Pavement friction. Unless otherwise specified, the road test surface produces a peak friction...

49 CFR 571.105 - Standard No. 105; Hydraulic and electric brake systems.

Code of Federal Regulations, 2011 CFR

2011-10-01

... current, and which may include a non-electrical source of power designed to charge batteries and... dissipating electrical energy. Skid number means the frictional resistance of a pavement measured in... subsystems actuated by a single control, designed so that a single failure in any subsystem (such as a...

49 CFR 571.105 - Standard No. 105; Hydraulic and electric brake systems.

Code of Federal Regulations, 2012 CFR

2012-10-01

... current, and which may include a non-electrical source of power designed to charge batteries and... dissipating electrical energy. Skid number means the frictional resistance of a pavement measured in..., designed so that a single failure in any subsystem (such as a leakage-type failure of a pressure component...

49 CFR 571.105 - Standard No. 105; Hydraulic and electric brake systems.

Code of Federal Regulations, 2013 CFR

2013-10-01

... current, and which may include a non-electrical source of power designed to charge batteries and... dissipating electrical energy. Skid number means the frictional resistance of a pavement measured in..., designed so that a single failure in any subsystem (such as a leakage-type failure of a pressure component...

Student Interest in Engineering Design-Based Science

ERIC Educational Resources Information Center

Selcen Guzey, S.; Moore, Tamara J.; Morse, Gillian

2016-01-01

Current reform efforts in science education around the world call on teachers to use integrated approaches to teach science. As a part of such reform efforts in the United States, engineering practices and engineering design have been identified in K-12 science education standards. However, there is relatively little is known about effective ways…

Three-Dimensional Measurement Applied in Design Eye Point of Aircraft Cockpits.

PubMed

Wang, Yanyan; Guo, Xiaochao; Liu, Qingfeng; Xiao, Huajun; Bai, Yu

2018-04-01

Inappropriate design eye point (DEP) will lead to nonstandard sitting postures, including nonneutral head positions and other uncomfortable sitting postures, which are high risk factors for neck pain in fighter pilots exposed to high G forces. Therefore, application of a 3D measurement method to collect data regarding eye position while in the cruising sitting posture in the aircraft cockpit to guide the design eye point has been proposed. A total of 304 male fixed wing aircraft pilots were divided into two groups. Subgroup A (N = 48) were studied to define the cruising posture during flight. Subgroup B (N = 256) were studied with Romer 3D measurement equipment to locate the cruising eye position of the pilots in a simulated cockpit. The 3D data were compared to DEP data in the current standard cockpit. According to 3D measurement, the vertical distance from the cruising eye point to the neutral seat reference point was 759 mm, which is 36 mm lower than that of the Chinese standard DEP and also lower than the U.S. military standard. The horizontal distance was 131 mm, which is 24 mm shorter than that of the Chinese standard. The current DEP data cannot fulfill the needs of fighter pilots and should be amended according to the results of the 3D measurement so that pilots can acquire the optimal cruising posture in flight. This new method has the value of practical application to investigate cockpit ergonomics and the measurement data can guide DEP design.Wang Y, Guo X, Liu Q, Xiao H, Bai Y. Three-dimensional measurement applied in design eye point of aircraft cockpits. Aerosp Med Hum Perform. 2018; 89(4):371-376.

Simulation Model of A Ferroelectric Field Effect Transistor

NASA Technical Reports Server (NTRS)

MacLeod, Todd C.; Ho, Fat Duen; Russell, Larry W. (Technical Monitor)

2002-01-01

An electronic simulation model has been developed of a ferroelectric field effect transistor (FFET). This model can be used in standard electrical circuit simulation programs to simulate the main characteristics of the FFET. The model uses a previously developed algorithm that incorporates partial polarization as a basis for the design. The model has the main characteristics of the FFET, which are the current hysterisis with different gate voltages and decay of the drain current when the gate voltage is off. The drain current has values matching actual FFET's, which were measured experimentally. The input and output resistance in the model is similar to that of the FFET. The model is valid for all frequencies below RF levels. A variety of different ferroelectric material characteristics can be modeled. The model can be used to design circuits using FFET'S with standard electrical simulation packages. The circuit can be used in designing non-volatile memory circuits and logic circuits and is compatible with all SPICE based circuit analysis programs. The model is a drop in library that integrates seamlessly into a SPICE simulation. A comparison is made between the model and experimental data measured from an actual FFET.

Qualification and Selection of Flight Diode Lasers for Space Applications

NASA Technical Reports Server (NTRS)

Liebe, Carl C.; Dillon, Robert P.; Gontijo, Ivair; Forouhar, Siamak; Shapiro, Andrew A.; Cooper, Mark S.; Meras, Patrick L.

2010-01-01

The reliability and lifetime of laser diodes is critical to space missions. The Nuclear Spectroscopic Telescope Array (NuSTAR) mission includes a metrology system that is based upon laser diodes. An operational test facility has been developed to qualify and select, by mission standards, laser diodes that will survive the intended space environment and mission lifetime. The facility is situated in an electrostatic discharge (ESD) certified clean-room and consist of an enclosed temperature-controlled stage that can accommodate up to 20 laser diodes. The facility is designed to characterize a single laser diode, in addition to conducting laser lifetime testing on up to 20 laser diodes simultaneously. A standard laser current driver is used to drive a single laser diode. Laser diode current, voltage, power, and wavelength are measured for each laser diode, and a method of selecting the most adequate laser diodes for space deployment is implemented. The method consists of creating histograms of laser threshold currents, powers at a designated current, and wavelengths at designated power. From these histograms, the laser diodes that illustrate a performance that is outside the normal are rejected and the remaining lasers are considered spaceborne candidates. To perform laser lifetime testing, the facility is equipped with 20 custom laser drivers that were designed and built by California Institute of Technology specifically to drive NuSTAR metrology lasers. The laser drivers can be operated in constant-current mode or alternating-current mode. Situated inside the enclosure, in front of the laser diodes, are 20 power-meter heads to record laser power throughout the duration of lifetime testing. Prior to connecting a laser diode to the current source for characterization and lifetime testing, a background program is initiated to collect current, voltage, and resistance. This backstage data collection enables the operational test facility to have full laser diode traceablity.

Definition of a 5MW/61.5m wind turbine blade reference model.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Resor, Brian Ray

2013-04-01

A basic structural concept of the blade design that is associated with the frequently utilized %E2%80%9CNREL offshore 5-MW baseline wind turbine%E2%80%9D is needed for studies involving blade structural design and blade structural design tools. The blade structural design documented in this report represents a concept that meets basic design criteria set forth by IEC standards for the onshore turbine. The design documented in this report is not a fully vetted blade design which is ready for manufacture. The intent of the structural concept described by this report is to provide a good starting point for more detailed and targeted investigationsmore » such as blade design optimization, blade design tool verification, blade materials and structures investigations, and blade design standards evaluation. This report documents the information used to create the current model as well as the analyses used to verify that the blade structural performance meets reasonable blade design criteria.« less

Static and dynamic fatigue behavior of topology designed and conventional 3D printed bioresorbable PCL cervical interbody fusion devices.

PubMed

Knutsen, Ashleen R; Borkowski, Sean L; Ebramzadeh, Edward; Flanagan, Colleen L; Hollister, Scott J; Sangiorgio, Sophia N

2015-09-01

Recently, as an alternative to metal spinal fusion cages, 3D printed bioresorbable materials have been explored; however, the static and fatigue properties of these novel cages are not well known. Unfortunately, current ASTM testing standards used to determine these properties were designed prior to the advent of bioresorbable materials for cages. Therefore, the applicability of these standards for bioresorbable materials is unknown. In this study, an image-based topology and a conventional 3D printed bioresorbable poly(ε)-caprolactone (PCL) cervical cage design were tested in compression, compression-shear, and torsion, to establish their static and fatigue properties. Difficulties were in fact identified in establishing failure criteria and in particular determining compressive failure load. Given these limitations, under static loads, both designs withstood loads of over 650 N in compression, 395 N in compression-shear, and 0.25 Nm in torsion, prior to yielding. Under dynamic testing, both designs withstood 5 million (5M) cycles of compression at 125% of their respective yield forces. Geometry significantly affected both the static and fatigue properties of the cages. The measured compressive yield loads fall within the reported physiological ranges; consequently, these PCL bioresorbable cages would likely require supplemental fixation. Most importantly, supplemental testing methods may be necessary beyond the current ASTM standards, to provide more accurate and reliable results, ultimately improving preclinical evaluation of these devices. Copyright © 2015 Elsevier Ltd. All rights reserved.

STANDARD REFERENCE MATERIALS FOR THE POLYMERS INDUSTRY.

PubMed

McDonough, Walter G; Orski, Sara V; Guttman, Charles M; Migler, Kalman D; Beers, Kathryn L

2016-01-01

The National Institute of Standards and Technology (NIST) provides science, industry, and government with a central source of well-characterized materials certified for chemical composition or for some chemical or physical property. These materials are designated Standard Reference Materials ® (SRMs) and are used to calibrate measuring instruments, to evaluate methods and systems, or to produce scientific data that can be referred readily to a common base. In this paper, we discuss the history of polymer based SRMs, their current status, and challenges and opportunities to develop new standards to address industrial measurement challenges.

Evaluation of Trap Designs and Deployment Strategies for Capturing Halyomorpha halys (Hemiptera: Pentatomidae)

PubMed Central

Morrison, William R.; Cullum, John P.; Leskey, Tracy C.

2015-01-01

Halyomorpha halys (Stål) is an invasive pest that attacks numerous crops. For growers to make informed management decisions against H. halys, an effective monitoring tool must be in place. We evaluated various trap designs baited with the two-component aggregation pheromone of H. halys and synergist and deployed in commercial apple orchards. We compared our current experimental standard trap, a black plywood pyramid trap 1.22 m in height deployed between border row apple trees with other trap designs for two growing seasons. These included a black lightweight coroplast pyramid trap of similar dimension, a smaller (29 cm) pyramid trap also ground deployed, a smaller limb-attached pyramid trap, a smaller pyramid trap hanging from a horizontal branch, and a semipyramid design known as the Rescue trap. We found that the coroplast pyramid was the most sensitive, capturing more adults than all other trap designs including our experimental standard. Smaller pyramid traps performed equally in adult captures to our experimental standard, though nymphal captures were statistically lower for the hanging traps. Experimental standard plywood and coroplast pyramid trap correlations were strong, suggesting that standard plywood pyramid traps could be replaced with lighter, cheaper coroplast pyramid traps. Strong correlations with small ground- and limb-deployed pyramid traps also suggest that these designs offer promise as well. Growers may be able to adopt alternative trap designs that are cheaper, lighter, and easier to deploy to monitor H. halys in orchards without a significant loss in sensitivity. PMID:26470309

A Complete Multimode Equivalent-Circuit Theory for Electrical Design

PubMed Central

Williams, Dylan F.; Hayden, Leonard A.; Marks, Roger B.

1997-01-01

This work presents a complete equivalent-circuit theory for lossy multimode transmission lines. Its voltages and currents are based on general linear combinations of standard normalized modal voltages and currents. The theory includes new expressions for transmission line impedance matrices, symmetry and lossless conditions, source representations, and the thermal noise of passive multiports. PMID:27805153

Compliance by Design: Influence of Acceleration Trade-offs on CO2 Emissions and Costs of Fuel Economy and Greenhouse Gas Regulations.

PubMed

Whitefoot, Kate S; Fowlie, Meredith L; Skerlos, Steven J

2017-09-19

The ability of automakers to improve the fuel economy of vehicles using engineering design modifications that compromise other performance attributes, such as acceleration, is not currently considered when setting fuel economy and greenhouse-gas emission standards for passenger cars and light trucks. We examine the role of these design trade-offs by simulating automaker responses to recently reformed vehicle standards with and without the ability to adjust acceleration performance. Results indicate that acceleration trade-offs can be important in two respects: (1) they can reduce the compliance costs of the standards, and (2) they can significantly reduce emissions associated with a particular level of the standards by mitigating incentives to shift sales toward larger vehicles and light trucks relative to passenger cars. We contrast simulation-based results with observed changes in vehicle attributes under the reformed standards. We find evidence that is consistent with firms using acceleration trade-offs to achieve compliance. Taken together, our analysis suggests that acceleration trade-offs play a role in automaker compliance strategies with potentially large implications for both compliance costs and emissions.

Digital frequency control of satellite frequency standards. [Defense Navigation Satellites

NASA Technical Reports Server (NTRS)

Nichols, S. A.

1973-01-01

In the Frequency and Time Standard Development Program of the TIMATION System, a new miniaturized rubidium vapor frequency standard has been tested and analyzed for possible use on the TIMATION 3A launch, as part of the Defense Navigation Satellite Development Program. The design and construction of a digital frequency control was required to remotely control this rubidium vapor frequency standard as well as the quartz oscillator in current use. This control must be capable of accepting commands from a satellite telemetry system, verify that the correct commands have been sent and control the frequency to the requirements of the system. Several modifications must be performed to the rubidium vapor frequency standard to allow it to be compatible with the digital frequency control. These include the addition of a varactor to voltage tune the coarse range of the flywheel oscillator, and a modification to supply the C field current externally. The digital frequency control for the rubidium vapor frequency standard has been successfully tested in prototype form.

Assessing the feasibility of yttria-stabilized zirconia in novel designs as mandibular anterior fixed lingual retention following orthodontic treatment

NASA Astrophysics Data System (ADS)

Stout, Matthew

The purpose of this study is to explore the feasibility of yttria-stabilized zirconia (Y-TZP) in fixed lingual retention as an alternative to stainless steel. Exploratory Y-TZP specimens were milled to establish design parameters. Next, specimens were milled according to ASTM standard C1161-13 and subjected to four-point flexural test to determine materials properties. Finite Element (FE) Analysis was employed to evaluate nine novel cross-sectional designs and compared to stainless steel wire. Each design was analyzed under the loading conditions to determine von Mises and bond stress. The most promising design was fabricated to assess accuracy and precision of current CAD/CAM milling technology. The superior design had a 1.0 x 0.5 mm semi-elliptical cross section and was shown to be fabricated reliably. Overall, the milling indicated a maximum percent standard deviation of 9.3 and maximum percent error of 13.5 with a cost of $30 per specimen. Y-TZP can be reliably milled to dimensions comparable to currently available metallic retainer wires. Further research is necessary to determine the success of bonding protocol and clinical longevity of Y-TZP fixed retainers. Advanced technology is necessary to connect the intraoral scan to an aesthetic and patient-specific Y-TZP fixed retainer.

Including Alternative Resources in State Renewable Portfolio Standards: Current Design and Implementation Experience

DOE Office of Scientific and Technical Information (OSTI.GOV)

Heeter, J.; Bird, L.

2012-11-01

Currently, 29 states, the District of Columbia, and Puerto Rico have instituted a renewable portfolio standard (RPS). An RPS sets a minimum threshold for how much renewable energy must be generated in a given year. Each state policy is unique, varying in percentage targets, timetables, and eligible resources. This paper examines state experience with implementing renewable portfolio standards that include energy efficiency, thermal resources, and non-renewable energy and explores compliance experience, costs, and how states evaluate, measure, and verify energy efficiency and convert thermal energy. It aims to gain insights from the experience of states for possible federal clean energymore » policy as well as to share experience and lessons for state RPS implementation.« less

FDA: Evidentiary Standards for Drug Development and Approval

PubMed Central

Katz, Russell

2004-01-01

Summary: The United States Food and Drug Administration is charged with approving drug treatments that have been shown to be safe and effective. Relevant statutes and regulations provide a legal framework for establishing safety and effectiveness that is sufficiently flexible to ensure that appropriate scientific data are collected for specific treatments targeted to particular diseases. Nonetheless, all clinical trials proposed to establish effectiveness must incorporate common elements in order for the appropriate legal and scientific standards of drug approval to be met. This article will discuss the relevant laws and regulations pertaining to the current effectiveness standard and will discuss the most important clinical trial design elements currently considered acceptable for applications for treatments of neurologic and psychiatric illness. PMID:15717032

Current limitations into the application of virtual reality to mental health research.

PubMed

Huang, M P; Alessi, N E

1998-01-01

Virtual Reality (VR) environments have significant potential as a tool in mental health research, but are limited by technical factors and by mental health research factors. Technical difficulties include cost and complexity of virtual environment creation. Mental health research difficulties include current inadequacy of standards to specify needed details for virtual environment design. Technical difficulties are disappearing with technological advances, but the mental health research difficulties will take a concerted effort to overcome. Some of this effort will need to be directed at the formation of collaborative projects and standards for how such collaborations should proceed.

Current Standardization and Cooperative Efforts Related to Industrial Information Infrastructures.

DTIC Science & Technology

1993-05-01

Data Management Systems: Components used to store, manage, and retrieve data. Data management includes knowledge bases, database management...Application Development Tools and Methods X/Open and POSIX APIs Integrated Design Support System (IDS) Knowledge -Based Systems (KBS) Application...IDEFlx) Yourdon Jackson System Design (JSD) Knowledge -Based Systems (KBSs) Structured Systems Development (SSD) Semantic Unification Meta-Model

Career Activity File: Counseling Tools for a Guidance Program, K-12.

ERIC Educational Resources Information Center

Oklahoma State Dept. of Career and Technology Education, Stillwater.

This career activity file provides career information resources and tools to support a guidance program. Section 1 is a school guidance program plan designed to assist school counselors in strengthening their current program or in designing a new one. The information can be used to assist schools in meeting the requirements of Standard VI,…

Supporting Interoperability and Context-Awareness in E-Learning through Situation-Driven Learning Processes

ERIC Educational Resources Information Center

Dietze, Stefan; Gugliotta, Alessio; Domingue, John

2009-01-01

Current E-Learning technologies primarily follow a data and metadata-centric paradigm by providing the learner with composite content containing the learning resources and the learning process description, usually based on specific metadata standards such as ADL SCORM or IMS Learning Design. Due to the design-time binding of learning resources,…

Human Factors, Habitability and Environmental Health and the Human Integration Design Handbook. Volume 2

NASA Technical Reports Server (NTRS)

Houbec, Keith; Tillman, Barry; Connolly, Janis

2010-01-01

For decades, Space Life Sciences and NASA as an Agency have considered NASA-STD-3000, Man-Systems Integration Standards, a significant contribution to human spaceflight programs and to human-systems integration in general. The document has been referenced in numerous design standards both within NASA and by organizations throughout the world. With research program and project results being realized, advances in technology and new information in a variety of topic areas now available, the time arrived to update this extensive suite of requirements and design information. During the past several years, a multi-NASA center effort has been underway to write the update to NASA-STD-3000 with standards and design guidance that would be applicable to all future human spaceflight programs. NASA-STD-3001 - Volumes 1 and 2 - and the Human Integration Design Handbook (HIDH) were created. Volume 1, Crew Health, establishes NASA s spaceflight crew health standards for the pre-flight, in-flight, and post-flight phases of human spaceflight. Volume 2, Human Factors, Habitability and Environmental Health, focuses on the requirements of human-system integration and how the human crew interacts with other systems, and how the human and the system function together to accomplish the tasks for mission success. The HIDH is a compendium of human spaceflight history and knowledge, and provides useful background information and research findings. And as the HIDH is a stand-alone companion to the Standards, the maintenance of the document has been streamlined. This unique and flexible approach ensures that the content is current and addresses the fundamental advances of human performance and human capabilities and constraints research. Current work focuses on the development of new sections of Volume 2 and collecting updates to the HIDH. The new sections in development expand the scope of the standard and address mission operations and support operations. This effort is again collaboration with representatives from the Johnson Space Center Missions Operations and Space Life Sciences Directorates and the Engineering Directorate from Kennedy Space Center as well as discipline experts from across the Agency.

Quantitative Imaging Biomarkers: A Review of Statistical Methods for Computer Algorithm Comparisons

PubMed Central

2014-01-01

Quantitative biomarkers from medical images are becoming important tools for clinical diagnosis, staging, monitoring, treatment planning, and development of new therapies. While there is a rich history of the development of quantitative imaging biomarker (QIB) techniques, little attention has been paid to the validation and comparison of the computer algorithms that implement the QIB measurements. In this paper we provide a framework for QIB algorithm comparisons. We first review and compare various study designs, including designs with the true value (e.g. phantoms, digital reference images, and zero-change studies), designs with a reference standard (e.g. studies testing equivalence with a reference standard), and designs without a reference standard (e.g. agreement studies and studies of algorithm precision). The statistical methods for comparing QIB algorithms are then presented for various study types using both aggregate and disaggregate approaches. We propose a series of steps for establishing the performance of a QIB algorithm, identify limitations in the current statistical literature, and suggest future directions for research. PMID:24919829

n-B-pi-p Superlattice Infrared Detector

NASA Technical Reports Server (NTRS)

Ting, David Z.; Bandara, Sumith V.; Hill, Cory J.; Gunapala, Sarath D.

2011-01-01

A specially designed barrier (B) is inserted at the n-pi junction [where most GR (generation-recombination) processes take place] in the standard n-pi-p structure to substantially reduce generation-recombination dark currents. The resulting n-Bpi- p structure also has reduced tunneling dark currents, thereby solving some of the limitations to which current type II strained layer superlattice infrared detectors are prone. This innovation is compatible with common read-out integrated circuits (ROICs).

Proceedings Papers of the AFSC (Air Force Systems Command) Avionics Standardization Conference (2nd) Held at Dayton, Ohio on 30 November-2 December 1982. Volume 2

DTIC Science & Technology

1982-11-01

groups. The Air Force is concerned with such issues such as resource allocation to foster and prcomotc standards, transitioning from current to future...perform automatic resource allocation , generate MATE Intermediate code, and provide formatted output listings. d. MATE Test Executive (MTE). The MTE...AFFECTED BY THESE STANDARDS TO KNOW JUST WHAT IS AVAILABLE TO SUPPORT THEM: THE HARDWARE; THE COMPLIANCE TESTING ; THE TOOLS NECESSARY TO FACILITATE DESIGN

DOE Office of Scientific and Technical Information (OSTI.GOV)

Arndt, T.E., Fluor Daniel Hanford

A previous evaluation documented in report WHC-SD-GN-RPT-30005, Rev. 0, titled ``Evaluation on Self-Contained High Efficiency Particulate Filters,`` revealed that the SCHEPA filters do not have required documentation to be in compliance with the design, testing, and fabrication standards required in ASME N-509, ASME N-510, and MIL-F-51068. These standards are required by DOE Order 6430.IA. Without this documentation, filter adequacy cannot be verified. The existing SCHEPA filters can be removed and replaced with new filters and filter housing which meet current codes and standards.

Aircraft voice intercommunications system design for Project Oculus

NASA Astrophysics Data System (ADS)

Wilhelm, Jay; Smith, James E.

2006-05-01

Project Oculus, an ongoing research platform for deploying airborne sensors on a C-130 aircraft, is currently in its pre-flight testing phase. The sensor platform is divided into two systems that rest on standard 463L pallets; a sensor deployment pallet and an operator station. The sensor pallet consists of a deployment arm and a pod, which can contain various sensors. The operator station houses power control equipment, data acquisition, and operators who control the sensors. Oculus is designed to fly on a C-130 aircraft, which has very high internal audible noise. Although Oculus' operator station contains noise-deadening material, a headset intercommunication system needs to be designed. This system must comply with different headset standards, communicate with the C-130 intercom, and be expandable to accommodate various audio sources like radios and satellites receivers. Throughout the years, intercom systems and headsets have evolved from the original standard consisting of an impedance rating of a speaker and a microphone. Early intercom systems were highly limited in functionality and quality due to simple electronics and common grounding. Advances in electronics allowed for the evolution of headset standards and intercom equipment, which permitted a multitude of new configurations and improved sound quality. With these advances, multiple headset standards and intercom interfaces have become popular among the military and civilian aviation. Due to the different standards for headsets, impedance matching plays a major role in the design of an intercom system. Oculus is a multi-mission platform and therefore must be designed to support a variety of standards including civilian and military headsets. This paper outlines the intercom units and parts considered for use in Oculus, and a design criteria for an extendable intercom system for Oculus.

Space-Based Telemetry and Range Safety (STARS) Study

NASA Technical Reports Server (NTRS)

Hogie, Keith; Crisuolo, Ed; Parise, Ron

2004-01-01

This presentation will describe the design, development, and testing of a system to collect telemetry, format it into UDP/IP packets, and deliver it to a ground test range using standard IP technologies over a TDRSS link. This presentation will discuss the goal of the STARS IP Formatter along with the overall design. It will also present performance results of the current version of the IP formatter. Finally, it will discuss key issues for supporting constant rate telemetry data delivery when using standard components such as PCI/104 processors, the Linux operating system, Internet Protocols, and synchronous serial interfaces.

Improving the power of long term rodent carcinogenicity bioassays by adjusting the experimental design.

PubMed

Jackson, Matthew T

2015-07-01

Since long term rodent carcinogenicity studies are used to test a very large number of potential tumor endpoints, finding a balance between the control of Type 1 and Type 2 error is challenging. As a result, these studies can suffer from very low power to detect effects of regulatory significance. In the present paper, a new design is proposed in order address this problem. This design is a simple modification of the existing standard designs and uses the same number of animals. Where it differs from the currently used designs is that it uses just three treatment groups rather than four, with the animals concentrated in the control and high dose groups, rather than being equally distributed among the groups. This new design is tested, in a pair of simulation studies over a range of scenarios, against two currently used designs, and against a maximally powerful two group design. It consistently performs at levels close to the optimal design, and except in the case of relatively modest effects and very rare tumors, is found to increase power by 10%-20% over the current designs while maintaining or reducing the Type 1 error rate. Published by Elsevier Inc.

The Devil's in the Details: Evidence from the GED on Large Effects of Small Differences in High Stakes Exams

ERIC Educational Resources Information Center

Tyler, John H.; Murnane, Richard J.; Willett, John B.

2004-01-01

As part of standards-based educational reform efforts, more than 40 states will soon require students to achieve passing scores on standardized exams in order to obtain a high school diploma. Currently, many states are struggling with the design of their examination systems, debating such questions as which subjects should be tested, what should…

Can context justify an ethical double standard for clinical research in developing countries?

PubMed Central

Landes, Megan

2005-01-01

Background The design of clinical research deserves special caution so as to safeguard the rights of participating individuals. While the international community has agreed on ethical standards for the design of research, these frameworks still remain open to interpretation, revision and debate. Recently a breach in the consensus of how to apply these ethical standards to research in developing countries has occurred, notably beginning with the 1994 placebo-controlled trials to reduce maternal to child transmission of HIV-1 in Africa, Asia and the Caribbean. The design of these trials sparked intense debate with the inclusion of a placebo-control group despite the existence of a 'gold standard' and trial supporters grounded their justifications of the trial design on the context of scarcity in resource-poor settings. Discussion These 'contextual' apologetics are arguably an ethical loophole inherent in current bioethical methodology. However, this convenient appropriation of 'contextual' analysis simply fails to acknowledge the underpinnings of feminist ethical analysis upon which it must stand. A more rigorous analysis of the political, social, and economic structures pertaining to the global context of developing countries reveals that the bioethical principles of beneficence and justice fail to be met in this trial design. Conclusion Within this broader, and theoretically necessary, understanding of context, it becomes impossible to justify an ethical double standard for research in developing countries. PMID:16045801

Monolithic integration of GMR sensors for standard CMOS-IC current sensing

NASA Astrophysics Data System (ADS)

De Marcellis, A.; Reig, C.; Cubells-Beltrán, M.-D.; Madrenas, J.; Santos, J. D.; Cardoso, S.; Freitas, P. P.

2017-09-01

In this work we report on the development of Giant Magnetoresistive (GMR) sensors for off-line current measurements in standard integrated circuits. An ASIC has been specifically designed and fabricated in the well-known AMS-0.35 μm CMOS technology, including the electronic circuitry for sensor interfacing. It implements an oscillating circuit performing a voltage-to-frequency conversion. Subsequently, a fully CMOS-compatible low temperature post-process has been applied for depositing the GMR sensing devices in a full-bridge configuration onto the buried current straps. Sensitivity and resolution of these sensors have been investigated achieving experimental results that show a detection sensitivity of about 100 Hz/mA, with a resolution of about 5 μA.

Standard cell electrical and physical variability analysis based on automatic physical measurement for design-for-manufacturing purposes

NASA Astrophysics Data System (ADS)

Shauly, Eitan; Parag, Allon; Khmaisy, Hafez; Krispil, Uri; Adan, Ofer; Levi, Shimon; Latinski, Sergey; Schwarzband, Ishai; Rotstein, Israel

2011-04-01

A fully automated system for process variability analysis of high density standard cell was developed. The system consists of layout analysis with device mapping: device type, location, configuration and more. The mapping step was created by a simple DRC run-set. This database was then used as an input for choosing locations for SEM images and for specific layout parameter extraction, used by SPICE simulation. This method was used to analyze large arrays of standard cell blocks, manufactured using Tower TS013LV (Low Voltage for high-speed applications) Platforms. Variability of different physical parameters like and like Lgate, Line-width-roughness and more as well as of electrical parameters like drive current (Ion), off current (Ioff) were calculated and statistically analyzed, in order to understand the variability root cause. Comparison between transistors having the same W/L but with different layout configurations and different layout environments (around the transistor) was made in terms of performances as well as process variability. We successfully defined "robust" and "less-robust" transistors configurations, and updated guidelines for Design-for-Manufacturing (DfM).

Randomized Controlled Trials in Music Therapy: Guidelines for Design and Implementation.

PubMed

Bradt, Joke

2012-01-01

Evidence from randomized controlled trials (RCTs) plays a powerful role in today's healthcare industry. At the same time, it is important that multiple types of evidence contribute to music therapy's knowledge base and that the dialogue of clinical effectiveness in music therapy is not dominated by the biomedical hierarchical model of evidence-based practice. Whether or not one agrees with the hierarchical model of evidence in the current healthcare climate, RCTs can contribute important knowledge to our field. Therefore, it is important that music therapists are prepared to design trials that meet current methodological standards and, equally important, are able to respond appropriately to those design aspects that may not be feasible in music therapy research. To provide practical guidelines to music therapy researchers for the design and implementation of RCTs as well as to enable music therapists to be well-informed consumers of RCT evidence. This article reviews key design aspects of RCTs and discusses how to best implement these standards in music therapy trials. A systematic presentation of basic randomization methods, allocation concealment strategies, issues related to blinding in music therapy trials and strategies for implementation, the use of treatment manuals, types of control groups, outcome selection, and sample size computation is provided. Despite the challenges of meeting all key design demands typical of an RCT, it is possible to design rigorous music therapy RCTs that accurately estimate music therapy treatment benefits.

Robust flight design for an advanced launch system vehicle

NASA Astrophysics Data System (ADS)

Dhand, Sanjeev K.; Wong, Kelvin K.

Current launch vehicle trajectory design philosophies are generally based on maximizing payload capability. This approach results in an expensive trajectory design process for each mission. Two concepts of robust flight design have been developed to significantly reduce this cost: Standardized Trajectories and Command Multiplier Steering (CMS). These concepts were analyzed for an Advanced Launch System (ALS) vehicle, although their applicability is not restricted to any particular vehicle. Preliminary analysis has demonstrated the feasibility of these concepts at minimal loss in payload capability.

Small hydropower plants standardization, between myth and reality

NASA Astrophysics Data System (ADS)

Paraschivescu, A. V.; Ahmad-Rashid, K.; Popa, F.; Popa, B.

2017-01-01

Many providers for small hydropower plants equipment have tried to standardize the components and even the entire equipment. So called “compact turbines” were launched on the market, ensuring the pre-designed solution of the modular components, but usually with lower efficiency then turbines specially designed for a certain site. For civil works it is possible to standardize some components, such as the powerhouse, the surge tank or the headrace, but not the intake and the weir. Part of the hydropower plants can be standardized, but not the entire project, because there are a lot of variables that influence the design. Among these, the dimension, materials and design of the canal and the penstock are given by the hydrology, topography and the geology of the project’s area. This paper presents an attempt at standardization by using different heads and different installed flows. The case study is made on the Lukosi River from Tanzania, because there is a good hydrological database on power and energy calculation. For the powerhouse, pressure tower and intake dimensioning, the assumptions and materials considered cover all challenges that could appear in the geological and topographical structure of the project’s area (worst case, most expensive). The study has highlighted African climatologic and hydrological conditions and the adapting of current technology to these conditions.

A 3.2-GHz fully integrated low-phase noise CMOS VCO with self-biasing current source for the IEEE 802.11a/hiperLAN WLAN standard

NASA Astrophysics Data System (ADS)

Quemada, C.; Adin, I.; Bistue, G.; Berenguer, R.; Mendizabal, J.

2005-06-01

A 3.3V, fully integrated 3.2-GHz voltage-controlled oscillator (VCO) is designed in a 0.18μm CMOS technology for the IEE 802.11a/HiperLAN WLAN standard for the UNII band from 5.15 to 5.35 GHz. The VCO is tunable between 2.85 GHz and 3.31 GHz. NMOS architecture with self-biasing current of the tank source is chosen. A startup circuit has been employed to avoid zero initial current. Current variation is lower than 1% for voltage supply variations of 10%. The use of a self-biasing current source in the tank provides a greater safety in the transconductance value and allows running along more extreme point operation The designed VCO displays a phase noise and output power of -98dBc/Hz (at 100 KHz offset frequency) and 0dBm respectively. This phase noise has been obtained with inductors of 2.2nH and quality factor of 12 at 3.2 GHz, and P-N junction varactors whose quality factor is estimated to exceed 40 at 3.2 GHz. These passive components have been fabricated, measured and modeled previously. The core of the VCO consumes 33mW DC power.

Standardizing lightweight deflectometer modulus measurements for compaction quality assurance : research summary.

DOT National Transportation Integrated Search

2017-09-01

The mechanistic-empirical pavement design method requires the elastic resilient modulus as the key input for characterization of geomaterials. Current density-based QA procedures do not measure resilient modulus. Additionally, the density-based metho...

Development of recommendations for arterial lane closures to optimize traffic operations.

DOT National Transportation Integrated Search

2013-01-01

The 2010 FDOT Design Standards provide information regarding traffic control through work zones at multilane arterials. : However, there are currently no quantitative guidelines for optimizing signal control around work zones. The objective of this :...

78 FR 52819 - Environmental Impact Statement: Interstate 81 Viaduct Project (Onondaga County, New York)

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-26

... repair and does not meet current design standards. The purpose of the project is to address these..., sustainability, and economic vitality of greater Syracuse. Alternatives under consideration include the no-build...

Pilot stereotypes for navigation symbols on electronic displays

DOT National Transportation Integrated Search

2006-09-20

There is currently no common symbology standard for the : electronic display of navigation information. The wide : range of display technologies and the different functions : these displays support make it difficult to design symbols : that are easil...

Limits to Open Class Performance?

NASA Technical Reports Server (NTRS)

Bowers, Albion H.

2007-01-01

This viewgraph presentation describes the limits to open class performance. The contents include: 1) Standard Class; 2) 15m/Racing Class; 3) Open Class; and 4) Design Solutions associated with assumptions, limiting parameters, airfoil performance, current trends, and analysis.

ANALYZING BIOSOLIDS FOR FECAL COLIFORM AND SALMONELLAE

EPA Science Inventory

Current federal regulations required monitoring for fecal coliforms or Salmonella in biosolids destined for land application. Standard protocols designed to quantify these organisms in water or wastewater were identified and specified in these regulations. However, proto...

Standardization of a Safing and Arming Device for Artillery Ammunition

DTIC Science & Technology

1976-10-01

designated by other author- ized documents. UNCLASSIFIED SECURITY CLASSIFICATION OF THIS PAGE (When Dala Entered) REPORT DOCUMENTATION PAGE READ...establish the physical and military requirements. Design studies were initiated on the current S&A devices. • DD FOR’* •’*• 1 JAN 73 1473...A developer. In the design of any mechanism, a precise definition of S&A requirements for all fuze applications is required prior to development

Magnetostriction measurement by four probe method

NASA Astrophysics Data System (ADS)

Dange, S. N.; Radha, S.

2018-04-01

The present paper describes the design and setting up of an indigenouslydevelopedmagnetostriction(MS) measurement setup using four probe method atroom temperature.A standard strain gauge is pasted with a special glue on the sample and its change in resistance with applied magnetic field is measured using KeithleyNanovoltmeter and Current source. An electromagnet with field upto 1.2 tesla is used to source the magnetic field. The sample is placed between the magnet poles using self designed and developed wooden probe stand, capable of moving in three mutually perpendicular directions. The nanovoltmeter and current source are interfaced with PC using RS232 serial interface. A software has been developed in for logging and processing of data. Proper optimization of measurement has been done through software to reduce the noise due to thermal emf and electromagnetic induction. The data acquired for some standard magnetic samples are presented. The sensitivity of the setup is 1microstrain with an error in measurement upto 5%.

Programmable high-output-impedance, large-voltage compliance, microstimulator for low-voltage biomedical applications.

PubMed

Farahmand, Sina; Maghami, Mohammad Hossein; Sodagar, Amir M

2012-01-01

This paper reports on the design of a programmable, high output impedance, large voltage compliance microstimulator for low-voltage biomedical applications. A 6-bit binary-weighted digital to analog converter (DAC) is used to generate biphasic stimulus current pulses. A compact current mirror with large output voltage compliance and high output resistance conveys the current pulses to the target tissue. Designed and simulated in a standard 0.18µm CMOS process, the microstimulator circuit is capable of delivering a maximum stimulation current of 160µA to a 10-kΩ resistive load. Operated at a 1.8-V supply voltage, the output stage exhibits a voltage compliance of 1.69V and output resistance of 160MΩ at full scale stimulus current. Layout of the core microelectrode circuit measures 25.5µm×31.5µm.

Design principles for shift current photovoltaics

DOE PAGES

Cook, Ashley M.; M. Fregoso, Benjamin; de Juan, Fernando; ...

2017-01-25

While the basic principles of conventional solar cells are well understood, little attention has gone towards maximizing the efficiency of photovoltaic devices based on shift currents. Furthermore, by analysing effective models, here we outline simple design principles for the optimization of shift currents for frequencies near the band gap. This method allows us to express the band edge shift current in terms of a few model parameters and to show it depends explicitly on wavefunctions in addition to standard band structure. We use our approach to identify two classes of shift current photovoltaics, ferroelectric polymer films and single-layer orthorhombic monochalcogenidesmore » such as GeS, which display the largest band edge responsivities reported so far. Moreover, exploring the parameter space of the tight-binding models that describe them we find photoresponsivities that can exceed 100 mA W -1 . Our results illustrate the great potential of shift current photovoltaics to compete with conventional solar cells.« less

Design principles for shift current photovoltaics

PubMed Central

Cook, Ashley M.; M. Fregoso, Benjamin; de Juan, Fernando; Coh, Sinisa; Moore, Joel E.

2017-01-01

While the basic principles of conventional solar cells are well understood, little attention has gone towards maximizing the efficiency of photovoltaic devices based on shift currents. By analysing effective models, here we outline simple design principles for the optimization of shift currents for frequencies near the band gap. Our method allows us to express the band edge shift current in terms of a few model parameters and to show it depends explicitly on wavefunctions in addition to standard band structure. We use our approach to identify two classes of shift current photovoltaics, ferroelectric polymer films and single-layer orthorhombic monochalcogenides such as GeS, which display the largest band edge responsivities reported so far. Moreover, exploring the parameter space of the tight-binding models that describe them we find photoresponsivities that can exceed 100 mA W−1. Our results illustrate the great potential of shift current photovoltaics to compete with conventional solar cells. PMID:28120823

Design principles for shift current photovoltaics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cook, Ashley M.; M. Fregoso, Benjamin; de Juan, Fernando

While the basic principles of conventional solar cells are well understood, little attention has gone towards maximizing the efficiency of photovoltaic devices based on shift currents. Furthermore, by analysing effective models, here we outline simple design principles for the optimization of shift currents for frequencies near the band gap. This method allows us to express the band edge shift current in terms of a few model parameters and to show it depends explicitly on wavefunctions in addition to standard band structure. We use our approach to identify two classes of shift current photovoltaics, ferroelectric polymer films and single-layer orthorhombic monochalcogenidesmore » such as GeS, which display the largest band edge responsivities reported so far. Moreover, exploring the parameter space of the tight-binding models that describe them we find photoresponsivities that can exceed 100 mA W -1 . Our results illustrate the great potential of shift current photovoltaics to compete with conventional solar cells.« less

Dendritic cells for active immunotherapy: optimizing design and manufacture in order to develop commercially and clinically viable products.

PubMed

Nicolette, C A; Healey, D; Tcherepanova, I; Whelton, P; Monesmith, T; Coombs, L; Finke, L H; Whiteside, T; Miesowicz, F

2007-09-27

Dendritic cell (DC) active immunotherapy is potentially efficacious in a broad array of malignant disease settings. However, challenges remain in optimizing DC-based therapy for maximum clinical efficacy within manufacturing processes that permit quality control and scale-up of consistent products. In this review we discuss the critical issues that must be addressed in order to optimize DC-based product design and manufacture, and highlight the DC based platforms currently addressing these issues. Variables in DC-based product design include the type of antigenic payload used, DC maturation steps and activation processes, and functional assays. Issues to consider in development include: (a) minimizing the invasiveness of patient biological material collection; (b) minimizing handling and manipulations of tissue at the clinical site; (c) centralized product manufacturing and standardized processing and capacity for commercial-scale production; (d) rapid product release turnaround time; (e) the ability to manufacture sufficient product from limited starting material; and (f) standardized release criteria for DC phenotype and function. Improvements in the design and manufacture of DC products have resulted in a handful of promising leads currently in clinical development.

Ureteral Stents. New Materials and Designs

NASA Astrophysics Data System (ADS)

Monga, Manoj

2008-09-01

Issues of stent migration and challenges of stent placement can be addressed adequately with current stent designs and materials, and an emphasis on precision in technique. Future changes in ureteral stents will need to maintain the current standard that has been set with existing devices in these regards. In contrast, new advances are sorely needed in encrustation and infection associated with ureteral stents. The main target for future development in ureteral stent materials lies in a biodegradable stent that degrades either on demand or degrades reliably within one-month with predictable degradation patterns that do not predispose to urinary obstruction, discomfort or need for secondary procedures. The main target for future development in ureteral stent design is improved patient comfort.

Understanding Current Safety Issues for Trajectory Based Operations

NASA Technical Reports Server (NTRS)

Feary, Michael; Stewart, Michael

2016-01-01

Increases in procedural complexity were investigated as a possible contributor to flight path deviations in airline operations. Understanding current operational issues and their causes must be embraced to maintain current safety standards while increasing future functionality. ASRS data and expert narratives were used to discover factors relating to pilot deviations. Our investigation pointed to ATC intervention, automation confusion, procedure design, and mixed equipment as primary issues. Future work will need to include objective data and mitigation strategies.

Updating Human Factors Engineering Guidelines for Conducting Safety Reviews of Nuclear Power Plants

DOE Office of Scientific and Technical Information (OSTI.GOV)

O, J.M.; Higgins, J.; Stephen Fleger - NRC

The U.S. Nuclear Regulatory Commission (NRC) reviews the human factors engineering (HFE) programs of applicants for nuclear power plant construction permits, operating licenses, standard design certifications, and combined operating licenses. The purpose of these safety reviews is to help ensure that personnel performance and reliability are appropriately supported. Detailed design review procedures and guidance for the evaluations is provided in three key documents: the Standard Review Plan (NUREG-0800), the HFE Program Review Model (NUREG-0711), and the Human-System Interface Design Review Guidelines (NUREG-0700). These documents were last revised in 2007, 2004 and 2002, respectively. The NRC is committed to the periodicmore » update and improvement of the guidance to ensure that it remains a state-of-the-art design evaluation tool. To this end, the NRC is updating its guidance to stay current with recent research on human performance, advances in HFE methods and tools, and new technology being employed in plant and control room design. This paper describes the role of HFE guidelines in the safety review process and the content of the key HFE guidelines used. Then we will present the methodology used to develop HFE guidance and update these documents, and describe the current status of the update program.« less

Human Factors Engineering Program Review Model (NUREG-0711)Revision 3: Update Methodology and Key Revisions

DOE Office of Scientific and Technical Information (OSTI.GOV)

OHara J. M.; Higgins, J.; Fleger, S.

The U.S. Nuclear Regulatory Commission (NRC) reviews the human factors engineering (HFE) programs of applicants for nuclear power plant construction permits, operating licenses, standard design certifications, and combined operating licenses. The purpose of these safety reviews is to help ensure that personnel performance and reliability are appropriately supported. Detailed design review procedures and guidance for the evaluations is provided in three key documents: the Standard Review Plan (NUREG-0800), the HFE Program Review Model (NUREG-0711), and the Human-System Interface Design Review Guidelines (NUREG-0700). These documents were last revised in 2007, 2004 and 2002, respectively. The NRC is committed to the periodicmore » update and improvement of the guidance to ensure that it remains a state-of-the-art design evaluation tool. To this end, the NRC is updating its guidance to stay current with recent research on human performance, advances in HFE methods and tools, and new technology being employed in plant and control room design. NUREG-0711 is the first document to be addressed. We present the methodology used to update NUREG-0711 and summarize the main changes made. Finally, we discuss the current status of the update program and the future plans.« less

Digital combined instrument transformer for automated electric power supply control systems of mining companies

NASA Astrophysics Data System (ADS)

Topolsky, D. V.; Gonenko, T. V.; Khatsevskiy, V. F.

2017-10-01

The present paper discusses ways to solve the problem of enhancing operating efficiency of automated electric power supply control systems of mining companies. According to the authors, one of the ways to solve this problem is intellectualization of the electric power supply control system equipment. To enhance efficiency of electric power supply control and electricity metering, it is proposed to use specially designed digital combined instrument current and voltage transformers. This equipment conforms to IEC 61850 international standard and is adapted for integration into the digital substation structure. Tests were performed to check conformity of an experimental prototype of the digital combined instrument current and voltage transformer with IEC 61850 standard. The test results have shown that the considered equipment meets the requirements of the standard.

Innovative approach to teaching communication skills to nursing students.

PubMed

Zavertnik, Jean Ellen; Huff, Tanya A; Munro, Cindy L

2010-02-01

This study assessed the effectiveness of a learner-centered simulation intervention designed to improve the communication skills of preprofessional sophomore nursing students. An innovative teaching strategy in which communication skills are taught to nursing students by using trained actors who served as standardized family members in a clinical learning laboratory setting was evaluated using a two-group posttest design. In addition to current standard education, the intervention group received a formal training session presenting a framework for communication and a 60-minute practice session with the standardized family members. Four domains of communication-introduction, gathering of information, imparting information, and clarifying goals and expectations-were evaluated in the control and intervention groups in individual testing sessions with a standardized family member. The intervention group performed better than the control group in all four tested domains related to communication skills, and the difference was statistically significant in the domain of gathering information (p = 0.0257). Copyright 2010, SLACK Incorporated.

Predictions for the drive capabilities of the RancheroS Flux Compression Generator into various load inductances using the Eulerian AMR Code Roxane

DOE Office of Scientific and Technical Information (OSTI.GOV)

Watt, Robert Gregory

The Ranchero Magnetic Flux Compression Generator (FCG) has been used to create current pulses in the 10-­100 MA range for driving both “static” low inductance (0.5 nH) loads1 for generator demonstration purposes and high inductance (10-­20 nH) imploding liner loads2 for ultimate use in physics experiments at very high energy density. Simulations of the standard Ranchero generator have recently shown that it had a design issue that could lead to flux trapping in the generator, and a non-­ robust predictability in its use in high energy density experiments. A re-­examination of the design concept for the standard Ranchero generator, promptedmore » by the possible appearance of an aneurism at the output glide plane, has led to a new generation of Ranchero generators designated the RancheroS (for swooped). This generator has removed the problematic output glide plane and replaced it with a region of constantly increasing diameter in the output end of the FCG cavity in which the armature is driven outward under the influence of an additional HE load not present in the original Ranchero. The resultant RancheroS generator, to be tested in LA43S-­L13, probably in early FY17, has a significantly increased initial inductance and may be able to drive a somewhat higher load inductance than the standard Ranchero. This report will use the Eulerian AMR code Roxane to study the ability of the new design to drive static loads, with a goal of providing a database corresponding to the load inductances for which the generator might be used and the anticipated peak currents such loads might produce in physics experiments. Such a database, combined with a simple analytic model of an ideal generator, where d(LI)/dt = 0, and supplemented by earlier estimates of losses in actual use of the standard Ranchero, scaled to estimate the increase in losses due to the longer current carrying perimeter in the RancheroS, can then be used to bound the expectations for the current drive one may apply to any load assembly in future experiments.« less

Defense Facility Condition: Revised Guidance Needed to Improve Oversight of Assessments and Ratings

DTIC Science & Technology

2016-06-01

are to implement the standardized process in part by assessing the condition of buildings, pavement , and rail using the same set of software tools...facility to current standards; costs for labor, equipment, materials, and currency exchange rates overseas; costs for project planning and design ...example, the services are to assess the condition of buildings, pavement , and rail using Sustainment Management System software tools developed by the

Combustion and fires in low gravity

NASA Technical Reports Server (NTRS)

Friedman, Robert

1994-01-01

Fire safety always receives priority attention in NASA mission designs and operations, with emphasis on fire prevention and material acceptance standards. Recently, interest in spacecraft fire-safety research and development has increased because improved understanding of the significant differences between low-gravity and normal-gravity combustion suggests that present fire-safety techniques may be inadequate or, at best, non-optimal; and the complex and permanent orbital operations in Space Station Freedom demand a higher level of safety standards and practices. This presentation outlines current practices and problems in fire prevention and detection for spacecraft, specifically the Space Station Freedom's fire protection. Also addressed are current practices and problems in fire extinguishment for spacecraft.

The Slow Controls System of the New Muon g-2 Experiment at Fermilab

NASA Astrophysics Data System (ADS)

Eads, Michael; New Muon g-2 Collaboration

2015-04-01

The goal of the new muon g-2 experiment (E-989), currently under construction at Fermi National Accelerator Laboratory, is to measure the anomalous gyromagnetic ratio of the muon with unprecedented precision. The uncertainty goal of the experiment, 0.14ppm, represents a four-fold improvement over the current best measurement of this value and has the potential to increase the current three standard deviation disagreement with the predicted standard model value to five standard deviations. Measuring the operating conditions of the experiment will be essential to achieving these uncertainty goals. This talk will describe the design and the current status of E-989's slow controls system. This system, based on the MIDAS Slow Control Bus, will be used to measure and record currents, voltages, temperatures, humidities, pressures, flows, and other data which is collected asynchronously with the injection of the muon beam. The system consists of a variety of sensors and front-end electronics which interface to back-end data acquisition, data storage, and data monitoring systems. Parts of the system are all already operational and the full system will be completed before beam commissioning begins in 2017.

Clinical Trial Design for HIV Prevention Research: Determining Standards of Prevention.

PubMed

Dawson, Liza; Zwerski, Sheryl

2015-06-01

This article seeks to advance ethical dialogue on choosing standards of prevention in clinical trials testing improved biomedical prevention methods for HIV. The stakes in this area of research are high, given the continued high rates of infection in many countries and the budget limitations that have constrained efforts to expand treatment for all who are currently HIV-infected. New prevention methods are still needed; at the same time, some existing prevention and treatment interventions have been proven effective but are not yet widely available in the countries where they most urgently needed. The ethical tensions in this field of clinical research are well known and have been the subject of extensive debate. There is no single clinical trial design that can optimize all the ethically important goals and commitments involved in research. Several recent articles have described the current ethical difficulties in designing HIV prevention trials, especially in resource limited settings; however, there is no consensus on how to handle clinical trial design decisions, and existing international ethical guidelines offer conflicting advice. This article acknowledges these deep ethical dilemmas and moves beyond a simple descriptive approach to advance an organized method for considering what clinical trial designs will be ethically acceptable for HIV prevention trials, balancing the relevant criteria and providing justification for specific design decisions. Published 2014. This article is a U.S. Government work and is in the public domain in the USA.

Human factors engineering in oil and gas--a review of industry guidance.

PubMed

Robb, Martin; Miller, Gerald

2012-01-01

Oil and gas exploration and production activities are carried out in hazardous environments in many parts of the world. Recent events in the Gulf of Mexico highlight those risks and underline the importance of considering human factors during facility design. Ergonomic factors such as machinery design, facility and accommodation layout and the organization of work activities have been systematically considered over the past twenty years on a limited number of offshore facility design projects to a) minimize the occupational risks to personnel, b) support operations and maintenance tasks and c) improve personnel wellbeing. During this period, several regulators and industry bodies such as the American Bureau of Shipping (ABS), the American Society of Testing and Materials (ASTM), the UK's Health and Safety Executive (HSE), Oil and Gas Producers (OGP), and Norway's Petroleum Safety Authority (PSA) have developed specific HFE design standards and guidance documents for the application of Human Factors Engineering (HFE) to the design and operation of Oil and Gas projects. However, despite the existence of these guidance and recommended design practise documents, and documented proof of their value in enhancing crew safety and efficiency, HFE is still not well understood across the industry and application across projects is inconsistent. This paper summarizes the key Oil and Gas industry bodies' HFE guidance documents, identifies recurring themes and current trends in the use of these standards, provides examples of where and how these HFE standards have been used on past major offshore facility design projects, and suggests criteria for selecting the appropriate HFE strategy and tasks for future major oil and gas projects. It also provides a short history of the application of HFE to the offshore industry, beginning with the use of ASTM F 1166 to a major operator's Deepwater Gulf of Mexico facility in 1990 and the application of HFE to diverse world regions. This latter point highlights the need to consider user populations when selecting HFE design criteria, an aspect strongly emphasized in current industry guidance.

Validation of next generation sequencing technologies in comparison to current diagnostic gold standards for BRAF, EGFR and KRAS mutational analysis.

PubMed

McCourt, Clare M; McArt, Darragh G; Mills, Ken; Catherwood, Mark A; Maxwell, Perry; Waugh, David J; Hamilton, Peter; O'Sullivan, Joe M; Salto-Tellez, Manuel

2013-01-01

Next Generation Sequencing (NGS) has the potential of becoming an important tool in clinical diagnosis and therapeutic decision-making in oncology owing to its enhanced sensitivity in DNA mutation detection, fast-turnaround of samples in comparison to current gold standard methods and the potential to sequence a large number of cancer-driving genes at the one time. We aim to test the diagnostic accuracy of current NGS technology in the analysis of mutations that represent current standard-of-care, and its reliability to generate concomitant information on other key genes in human oncogenesis. Thirteen clinical samples (8 lung adenocarcinomas, 3 colon carcinomas and 2 malignant melanomas) already genotyped for EGFR, KRAS and BRAF mutations by current standard-of-care methods (Sanger Sequencing and q-PCR), were analysed for detection of mutations in the same three genes using two NGS platforms and an additional 43 genes with one of these platforms. The results were analysed using closed platform-specific proprietary bioinformatics software as well as open third party applications. Our results indicate that the existing format of the NGS technology performed well in detecting the clinically relevant mutations stated above but may not be reliable for a broader unsupervised analysis of the wider genome in its current design. Our study represents a diagnostically lead validation of the major strengths and weaknesses of this technology before consideration for diagnostic use.

Administrative Support Occupations Skill Standards.

ERIC Educational Resources Information Center

Professional Secretaries International, Kansas City, MO.

This document establishes a set of performance expectations based on current practices in administrative support occupations. It is designed to assist individuals, training providers, employers, management personnel, and professional organizations in matching knowledge, abilities, and interests to knowledge and skills required for success in…

Meaningful Written Communication by Administrators

ERIC Educational Resources Information Center

Keil, Virginia L.; McConnahan, Wendell R.

2006-01-01

Fifty-eight principals participated in this pilot study designed to examine the nature of school administrators' current practices in written communication. Work samples were examined against ISLLC standards that call for competency in facilitating vision, communicating culture and instruction, managing the organization, developing collaboration…

Effect of Solid-State Power-Converter Harmonics on Electric-Power-Supply Systems

DOT National Transportation Integrated Search

1973-03-01

The United States utility industry has not set suitable standards, other than TIF (Telephone Interference Factor), for controlling the design of solid-state wayside and on-board power-conversion equipment, to limit the harmonic currents and voltages ...

23 CFR 668.109 - Eligibility.

Code of Federal Regulations, 2013 CFR

2013-04-01

... damages consisting primarily of eroded shoulders, filled ditches and culverts, pavement settlement, mud..., not related to the increased traffic volumes, such as mowing, maintaining drainage, pavement signing... limited in ER reimbursement to the cost of a new facility to current design standards of comparable...

23 CFR 668.109 - Eligibility.

Code of Federal Regulations, 2010 CFR

2010-04-01

... damages consisting primarily of eroded shoulders, filled ditches and culverts, pavement settlement, mud..., not related to the increased traffic volumes, such as mowing, maintaining drainage, pavement signing... limited in ER reimbursement to the cost of a new facility to current design standards of comparable...

23 CFR 668.109 - Eligibility.

Code of Federal Regulations, 2014 CFR

2014-04-01

... damages consisting primarily of eroded shoulders, filled ditches and culverts, pavement settlement, mud..., not related to the increased traffic volumes, such as mowing, maintaining drainage, pavement signing... limited in ER reimbursement to the cost of a new facility to current design standards of comparable...

23 CFR 668.109 - Eligibility.

Code of Federal Regulations, 2012 CFR

2012-04-01

... damages consisting primarily of eroded shoulders, filled ditches and culverts, pavement settlement, mud..., not related to the increased traffic volumes, such as mowing, maintaining drainage, pavement signing... limited in ER reimbursement to the cost of a new facility to current design standards of comparable...

23 CFR 668.109 - Eligibility.

Code of Federal Regulations, 2011 CFR

2011-04-01

... damages consisting primarily of eroded shoulders, filled ditches and culverts, pavement settlement, mud..., not related to the increased traffic volumes, such as mowing, maintaining drainage, pavement signing... limited in ER reimbursement to the cost of a new facility to current design standards of comparable...

10 CFR Appendix A to Subpart B of... - Policy Statement for Electric Motors Covered Under the Energy Policy and Conservation Act

Code of Federal Regulations, 2010 CFR

2010-01-01

... examples, most motors currently in production, or to be designed in the future, could probably be... motor by type, model number, and date of design or production; (2) the name of the original equipment... standards. 1 The term “manufacture” means “to manufacture, produce, assemble or import.” EPCA § 321(10...

Fiber-Reinforced Concrete For Hardened Shelter Construction

DTIC Science & Technology

1993-02-01

reduced cost and weight versus the symmetrically rebar reinforced beam design using normal-weight, standard-strength concrete currently used by the...while possibly reducing their cost and weight. Emphasis is placed on modular construction using prefabricated fiber- and rebar -reinforced concrete ...fiber- and rebar -reinforced concrete structural members into U.S. Air Force hardened structure designs. vii (The reverse of this page is blank) PREFACE

76 FR 472 - Harmonization of Airworthiness Standards for Transport Category Airplanes-Landing Gear Retracting...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-05

... design takeoff weight), occurring during retraction and extension at any airspeed up to 1.5 V SR1 with...) currently uses a peripheral speed equal to 1.3 V S during retraction and extension at any airspeed up to 1.6... design takeoff weight), occurring during retraction and extension at any airspeed up to 1.5 V SR1 (with...

STRS Compliant FPGA Waveform Development

NASA Technical Reports Server (NTRS)

Nappier, Jennifer; Downey, Joseph; Mortensen, Dale

2008-01-01

The Space Telecommunications Radio System (STRS) Architecture Standard describes a standard for NASA space software defined radios (SDRs). It provides a common framework that can be used to develop and operate a space SDR in a reconfigurable and reprogrammable manner. One goal of the STRS Architecture is to promote waveform reuse among multiple software defined radios. Many space domain waveforms are designed to run in the special signal processing (SSP) hardware. However, the STRS Architecture is currently incomplete in defining a standard for designing waveforms in the SSP hardware. Therefore, the STRS Architecture needs to be extended to encompass waveform development in the SSP hardware. The extension of STRS to the SSP hardware will promote easier waveform reconfiguration and reuse. A transmit waveform for space applications was developed to determine ways to extend the STRS Architecture to a field programmable gate array (FPGA). These extensions include a standard hardware abstraction layer for FPGAs and a standard interface between waveform functions running inside a FPGA. A FPGA-based transmit waveform implementation of the proposed standard interfaces on a laboratory breadboard SDR will be discussed.

Quantitative imaging biomarkers: a review of statistical methods for computer algorithm comparisons.

PubMed

Obuchowski, Nancy A; Reeves, Anthony P; Huang, Erich P; Wang, Xiao-Feng; Buckler, Andrew J; Kim, Hyun J Grace; Barnhart, Huiman X; Jackson, Edward F; Giger, Maryellen L; Pennello, Gene; Toledano, Alicia Y; Kalpathy-Cramer, Jayashree; Apanasovich, Tatiyana V; Kinahan, Paul E; Myers, Kyle J; Goldgof, Dmitry B; Barboriak, Daniel P; Gillies, Robert J; Schwartz, Lawrence H; Sullivan, Daniel C

2015-02-01

Quantitative biomarkers from medical images are becoming important tools for clinical diagnosis, staging, monitoring, treatment planning, and development of new therapies. While there is a rich history of the development of quantitative imaging biomarker (QIB) techniques, little attention has been paid to the validation and comparison of the computer algorithms that implement the QIB measurements. In this paper we provide a framework for QIB algorithm comparisons. We first review and compare various study designs, including designs with the true value (e.g. phantoms, digital reference images, and zero-change studies), designs with a reference standard (e.g. studies testing equivalence with a reference standard), and designs without a reference standard (e.g. agreement studies and studies of algorithm precision). The statistical methods for comparing QIB algorithms are then presented for various study types using both aggregate and disaggregate approaches. We propose a series of steps for establishing the performance of a QIB algorithm, identify limitations in the current statistical literature, and suggest future directions for research. © The Author(s) 2014 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

Program design by a multidisciplinary team. [for structural finite element analysis on STAR-100 computer

NASA Technical Reports Server (NTRS)

Voigt, S.

1975-01-01

The use of software engineering aids in the design of a structural finite-element analysis computer program for the STAR-100 computer is described. Nested functional diagrams to aid in communication among design team members were used, and a standardized specification format to describe modules designed by various members was adopted. This is a report of current work in which use of the functional diagrams provided continuity and helped resolve some of the problems arising in this long-running part-time project.

Designing a Standardized Laparoscopy Curriculum for Gynecology Residents: A Delphi Approach

PubMed Central

Shore, Eliane M.; Lefebvre, Guylaine G.; Husslein, Heinrich; Bjerrum, Flemming; Sorensen, Jette Led; Grantcharov, Teodor P.

2015-01-01

Background Evidence suggests that simulation leads to improved operative skill, shorter operating room time, and better patient outcomes. Currently, no standardized laparoscopy curriculum exists for gynecology residents. Objective To design a structured laparoscopy curriculum for gynecology residents using Delphi consensus methodology. Methods This study began with Delphi methodology to determine expert consensus on the components of a gynecology laparoscopic skills curriculum. We generated a list of cognitive content, technical skills, and nontechnical skills for training in laparoscopic surgery, and asked 39 experts in gynecologic education to rate the items on a Likert scale (1–5) for inclusion in the curriculum. Consensus was predefined as Cronbach α of ≥ 0.80. We then conducted another Delphi survey with 9 experienced users of laparoscopic virtual reality simulators to delineate relevant curricular tasks. Finally, a cross-sectional design defined benchmark scores for all identified tasks, with 10 experienced gynecologic surgeons performing the identified tasks at basic, intermediate, and advanced levels. Results Consensus (Cronbach α = 0.85) was achieved in the first round of the curriculum Delphi, and after 2 rounds (Cronbach α = 0.80) in the virtual reality curriculum Delphi. Consensus was reached for cognitive, technical, and nontechnical skills as well as for 6 virtual reality tasks. Median time and economy of movement scores defined benchmarks for all tasks. Conclusions This study used Delphi consensus to develop a comprehensive curriculum for teaching gynecologic laparoscopy. The curriculum conforms to current educational standards of proficiency-based training, and is suggested as a standard in residency programs. PMID:26221434

Near term hybrid passenger vehicle development program, phase 1

NASA Technical Reports Server (NTRS)

1980-01-01

Missions for hybrid vehicles that promise to yield high petroleum impact were identified and a preliminary design, was developed that satisfies the mission requirements and performance specifications. Technologies that are critical to successful vehicle design, development and fabrication were determined. Trade-off studies to maximize fuel savings were used to develop initial design specifications of the near term hybrid vehicle. Various designs were "driven" through detailed computer simulations which calculate the petroleum consumption in standard driving cycles, the petroleum and electricity consumptions over the specified missions, and the vehicle's life cycle costs over a 10 year vehicle lifetime. Particular attention was given to the selection of the electric motor, heat engine, drivetrain, battery pack and control system. The preliminary design reflects a modified current compact car powered by a currently available turbocharged diesel engine and a 24 kW (peak) compound dc electric motor.

HARMONI instrument control electronics

NASA Astrophysics Data System (ADS)

Gigante, José V.; Rodríguez Ramos, Luis F.; Zins, Gerard; Schnetler, Hermine; Pecontal, Arlette; Herreros, José Miguel; Clarke, Fraser; Bryson, Ian; Thatte, Niranjan

2014-07-01

HARMONI is an integral field spectrograph working at visible and near-infrared wavelengths over a range of spatial scales from ground layer corrected to fully diffraction-limited. The instrument has been chosen to be part of the first-light complement at the European Extremely Large Telescope (E-ELT). This paper describes the instrument control electronics to be developed at IAC. The large size of the HARMONI instrument, its cryogenic operation, and the fact that it must operate with enhanced reliability is a challenge from the point of view of the control electronics design. The present paper describes a design proposal based on the current instrument requirements and intended to be fully compliant with the ESO E-ELT standards, as well as with the European EMC and safety standards. The modularity of the design and the use of COTS standard hardware will benefit the project in several aspects, as reduced costs, shorter schedule by the use of commercially available components, and improved quality by the use of well proven solutions.

Leo Spacecraft Charging Design Guidelines: A Proposed NASA Standard

NASA Technical Reports Server (NTRS)

Hillard, G. B.; Ferguson, D. C.

2004-01-01

Over the past decade, Low Earth Orbiting (LEO) spacecraft have gradually required ever-increasing power levels. As a rule, this has been accomplished through the use of high voltage systems. Recent failures and anomalies on such spacecraft have been traced to various design practices and materials choices related to the high voltage solar arrays. NASA Glenn has studied these anomalies including plasma chamber testing on arrays similar to those that experienced difficulties on orbit. Many others in the community have been involved in a comprehensive effort to understand the problems and to develop practices to avoid them. The NASA Space Environments and Effects program, recognizing the timeliness of this effort, commissioned and funded a design guidelines document intended to capture the current state of understanding. This document, which was completed in the spring of 2003, has been submitted as a proposed NASA standard. We present here an overview of this document and discuss the effort to develop it as a NASA standard.

Portable precision dc voltage-current transfer standard for electrometer calibration

USGS Publications Warehouse

Landis, G.; Godwin, M.

1982-01-01

A circuit design is presented for an instrument providing a highly stable and fully adjustable voltage and current in the range of 0-1.999 V or 0-199.9 mV and 10-11-10-15 A. This instrument is used to verify the calibration and performance of dc and vibrating reed electrometers and chart recorders on mass spectrometers of the USGS Isotope Laboratories in Denver.

Rethinking the NTCIP Design and Protocols - Analyzing the Issues

DOT National Transportation Integrated Search

1998-03-03

This working paper discusses the issues involved in changing the current draft NTCIP standard from an X.25-based protocol stack to an Internet-based protocol stack. It contains a methodology which could be used to change NTCIP's base protocols. This ...

An Expert System for Classifying Stars on the MK Spectral Classification System

NASA Astrophysics Data System (ADS)

Corbally, Christopher J.; Gray, R. O.

2013-01-01

We will describe an expert computer system designed to classify stellar spectra on the MK Spectral Classification system employing methods similar to those of humans who make direct comparison with the MK classification standards. Like an expert human classifier, MKCLASS first comes up with a rough spectral type, and then refines that type by direct comparison with MK standards drawn from a standards library using spectral criteria appropriate to the spectral class. Certain common spectral-type peculiarities can also be detected by the program. The program is also capable of identifying WD spectra and carbon stars and giving appropriate (but currently approximate) spectral types on the relevant systems. We will show comparisons between spectral types (including luminosity types) performed by MKCLASS and humans. The program currently is capable of competent classifications in the violet-green region, but plans are underway to extend the spectral criteria into the red and near-infrared regions. Two standard libraries with resolutions of 1.8 and 3.6Å are now available, but a higher-resolution standard library, using the new spectrograph on the Vatican Advanced Technology Telescope, is currently under preparation. Once that library is available, MKCLASS and the spectral libraries will be made available to the astronomical community.

IMPLEMENTATION OF THE SEISMIC DESIGN CRITERIA OF DOE-STD-1189-2008 APPENDIX A [FULL PAPER

DOE Office of Scientific and Technical Information (OSTI.GOV)

OMBERG SK

2008-05-14

This paper describes the approach taken by two Fluor Hanford projects for implementing of the seismic design criteria from DOE-STD-1189-2008, Appendix A. The existing seismic design criteria and the new seismic design criteria is described, and an assessment of the primary differences provided. The gaps within the new system of seismic design criteria, which necessitate conduct of portions of work to the existing technical standards pending availability of applicable industry standards, is discussed. Two Hanford Site projects currently in the Control Decision (CD)-1 phase of design have developed an approach to implementation of the new criteria. Calculations have been performedmore » to determine the seismic design category for one project, based on information available in early CD-1. The potential effects of DOE-STD-1189-2008, Appendix A seismic design criteria on the process of project alternatives analysis is discussed. Present of this work is expected to benefit others in the DOE Complex that may be implementing DOE-STD-1189-2008.« less

Medical Technology Base Master Plan

DTIC Science & Technology

1990-03-01

methodologes to evaluate off ectiveness of current and new Integrated protectivb equxipment systems. The failure of the system designer to adequately consider...With animal studies to use fewer than one-tenth the nu~r~e of aniimals used In standard factorial experimental designs , and "* Preliminary development of...research and developmnent have Produced Cost savings as well as sustained and augmented combat and non -combat rniss~on effectiveness. Examples 0f the Armys

The flight telerobotic servicer Tinman concept: System design drivers and task analysis

NASA Technical Reports Server (NTRS)

Andary, J. F.; Hewitt, D. R.; Hinkal, S. W.

1989-01-01

A study was conducted to develop a preliminary definition of the Flight Telerobotic Servicer (FTS) that could be used to understand the operational concepts and scenarios for the FTS. Called the Tinman, this design concept was also used to begin the process of establishing resources and interfaces for the FTS on Space Station Freedom, the National Space Transportation System shuttle orbiter, and the Orbital Maneuvering vehicle. Starting with an analysis of the requirements and task capabilities as stated in the Phase B study requirements document, the study identified eight major design drivers for the FTS. Each of these design drivers and their impacts on the Tinman design concept are described. Next, the planning that is currently underway for providing resources for the FTS on Space Station Freedom is discussed, including up to 2000 W of peak power, up to four color video channels, and command and data rates up to 500 kbps between the telerobot and the control station. Finally, an example is presented to show how the Tinman design concept was used to analyze task scenarios and explore the operational capabilities of the FTS. A structured methodology using a standard terminology consistent with the NASA/National Bureau of Standards Standard Reference Model for Telerobot Control System Architecture (NASREM) was developed for this analysis.

Development of a TL-3 deep beam tubular backup bridge rail : executive summary report.

DOT National Transportation Integrated Search

2010-12-01

Ohio Department of Transportation (ODOT)s Office of Structural Engineering has a need to evaluate and, if necessary, improve an existing bridge rail design with a simple retrofitting procedure to meet current or proposed crash testing standards. T...

Integrating Sensor Monitoring Technology into the Current Air Pollution Regulatory Support Paradigm: Practical Considerations

EPA Science Inventory

The US Environmental Protection Agency (EPA) along with state, local, and tribal governments operate Federal Reference Method (FRM) and Federal Equivalent Method (FEM) instruments to assess compliance with US air pollution standards designed to protect human and ecosystem health....

Revision and further validation of surface-performance graded specification for surface treatment binders.

DOT National Transportation Integrated Search

2012-12-01

The design and selection of surface treatment binders in service is currently based on specifications that include tests of emulsion residues or hot-applied asphalt cements at standard temperatures that do not cover the entire range of in service tem...

An overview of the challenges in designing, integrating, and delivering BARD: a public chemical biology resource and query portal across multiple organizations, locations, and disciplines

PubMed Central

de Souza, Andrea; Bittker, Joshua; Lahr, David; Brudz, Steve; Chatwin, Simon; Oprea, Tudor I.; Waller, Anna; Yang, Jeremy; Southall, Noel; Guha, Rajarshi; Schurer, Stephan; Vempati, Uma; Southern, Mark R.; Dawson, Eric S.; Clemons, Paul A.; Chung, Thomas D.Y.

2015-01-01

Recent industry-academic partnerships involve collaboration across disciplines, locations, and organizations using publicly funded “open-access” and proprietary commercial data sources. These require effective integration of chemical and biological information from diverse data sources, presenting key informatics, personnel, and organizational challenges. BARD (BioAssay Research Database) was conceived to address these challenges and to serve as a community-wide resource and intuitive web portal for public-sector chemical biology data. Its initial focus is to enable scientists to more effectively use the NIH Roadmap Molecular Libraries Program (MLP) data generated from 3-year pilot and 6-year production phases of the Molecular Libraries Probe Production Centers Network (MLPCN), currently in its final year. BARD evolves the current data standards through structured assay and result annotations that leverage the BioAssay Ontology (BAO) and other industry-standard ontologies, and a core hierarchy of assay definition terms and data standards defined specifically for small-molecule assay data. We have initially focused on migrating the highest-value MLP data into BARD and bringing it up to this new standard. We review the technical and organizational challenges overcome by the inter-disciplinary BARD team, veterans of public and private sector data-integration projects, collaborating to describe (functional specifications), design (technical specifications), and implement this next-generation software solution. PMID:24441647

An Open Source Rapid Computer Aided Control System Design Toolchain Using Scilab, Scicos and RTAI Linux

NASA Astrophysics Data System (ADS)

Bouchpan-Lerust-Juéry, L.

2007-08-01

Current and next generation on-board computer systems tend to implement real-time embedded control applications (e.g. Attitude and Orbit Control Subsystem (AOCS), Packet Utililization Standard (PUS), spacecraft autonomy . . . ) which must meet high standards of Reliability and Predictability as well as Safety. All these requirements require a considerable amount of effort and cost for Space Sofware Industry. This paper, in a first part, presents a free Open Source integrated solution to develop RTAI applications from analysis, design, simulation and direct implementation using code generation based on Open Source and in its second part summarises this suggested approach, its results and the conclusion for further work.

Standardizing the Delivery of 20 μL of Hapten During Patch Testing.

PubMed

Selvick, Annika; Stauss, Kari; Strobush, Katrina; Taylor, Lauren; Picard, Alexandra; Doll, Andrea; Reeder, Margo

2016-01-01

The current method for patch test tray assembly requires hand dispensing a small volume of hapten onto chambers. Because of human error, this technique produces inaccurate and inconsistent results. The recommended volume of hapten for patch testing using Finn Chambers is 20 μL. The aims of this study were to create a device that standardizes the delivery of 20 μL and to compare it with the current hand dispensing technique. A device, named the Revolution, was created using the SolidWorks program. Five nurses in our Contact Dermatitis Clinic were asked to load 10 Finn Chambers using the current technique and also using the Revolution. Assembly time, volume of petrolatum, and accuracy of placement were measured. After the 3 trials, the nurses completed a survey on the 2 methods. The amount of petrolatum dispensed using the current technique ranged from 16 to 85 μL, with an average amount of 41.39 μL. The Revolution design dispensed an average of 19.78 μL. The current hand dispensing technique does not allow for accurate and consistent dispensing of 20 μL for patch testing. In contrast, the Revolution is an accurate and consistent device that can help standardize the patch testing method.

76 FR 54293 - Review of National Ambient Air Quality Standards for Carbon Monoxide

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-31

...This rule is being issued at this time as required by a court order governing the schedule for completion of this review of the air quality criteria and the national ambient air quality standards (NAAQS) for carbon monoxide (CO). Based on its review, the EPA concludes the current primary standards are requisite to protect public health with an adequate margin of safety, and is retaining those standards. After review of the air quality criteria, EPA further concludes that no secondary standard should be set for CO at this time. EPA is also making changes to the ambient air monitoring requirements for CO, including those related to network design, and is updating, without substantive change, aspects of the Federal reference method.

StaR Child Health: improving global standards for child health research.

PubMed

Offringa, Martin; Needham, Allison C; Chan, Winnie W Y

2013-11-01

Standards for Research (StaR) in Child Health, founded in 2009, addresses the current scarcity of and deficiencies in pediatric clinical trials. StaR Child Health brings together leading international experts devoted to developing practical, evidence-based standards to enrich the reliability and relevance of pediatric clinical research. Through a systematic "knowledge to action" plan, StaR Child Health creates opportunities to improve the evidence base for child health across the world. To date, six standards have been published and four more are under development. It is now time to use these standards. Improving the design, conduct and reporting of pediatric clinical trials will ultimately advance the quality of health care provided to children across the globe. Crown Copyright © 2013. All rights reserved.

The LeRC rail accelerators: Test designs and diagnostic techniques

NASA Technical Reports Server (NTRS)

Zana, L. M.; Kerslake, W. R.; Sturman, J. C.; Wang, S. Y.; Terdan, F. F.

1983-01-01

The feasibility of using rail accelerators for various in-space and to-space propulsion applications was investigated. A 1 meter, 24 sq mm bore accelerator was designed with the goal of demonstrating projectile velocities of 15 km/sec using a peak current of 200 kA. A second rail accelerator, 1 meter long with a 156.25 sq mm bore, was designed with clear polycarbonate sidewalls to permit visual observation of the plasma arc. A study of available diagnostic techniques and their application to the rail accelerator is presented. Specific topics of discussion include the use of interferometry and spectroscopy to examine the plasma armature as well as the use of optical sensors to measure rail displacement during acceleration. Standard diagnostics such as current and voltage measurements are also discussed.

Update to the USDA-ARS fixed-wing spray nozzle models

USDA-ARS?s Scientific Manuscript database

The current USDA ARS Aerial Spray Nozzle Models were updated to reflect both new standardized measurement methods and systems, as well as, to increase operational spray pressure, aircraft airspeed and nozzle orientation angle limits. The new models were developed using both Central Composite Design...

The Talent Search Model: Past, Present, and Future

ERIC Educational Resources Information Center

Swiatek, Mary Ann

2007-01-01

Typical standardized achievement tests cannot provide accurate information about gifted students' abilities because they are not challenging enough for such students. Talent searches solve this problem through above-level testing--using tests designed for older students to raise the ceiling for younger, gifted students. Currently, talent search…

Thrust reverser analysis for implementation in the Aviation Environmental Design Tool (AEDT)

DOT National Transportation Integrated Search

2007-06-01

This letter report presents an updated implementation for thrust reversers in AEDT. Currently, thrust reverser is applied to all STANDARD approach profiles in the Integrated Noise Mode (lNM) as 60% of the max rated thrust for jets and 40% for props o...

Solid-State Fault Current Limiter Development : Design and Testing Update of a 15kV SSCL Power Stack

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dr. Ram Adapa; Mr. Dante Piccone

2012-04-30

ABSTRACT The Solid-State Fault Current Limiter (SSCL) is a promising technology that can be applied to utility power delivery systems to address the problem of increasing fault currents associated with load growth. As demand continues to grow, more power is added to utility system either by increasing generator capacity or by adding distributed generators, resulting in higher available fault currents, often beyond the capabilities of the present infrastructure. The SSCL is power-electronics based equipment designed to work with the present utility system to address this problem. The SSCL monitors the line current and dynamically inserts additional impedance into the linemore » in the event of a fault being detected. The SSCL is based on a modular design and can be configured for 5kV through 69kV systems at nominal current ratings of 1000A to 4000A. Results and Findings This report provides the final test results on the development of 15kV class SSCL single phase power stack. The scope of work included the design of the modular standard building block sub-assemblies, the design and manufacture of the power stack and the testing of the power stack for the key functional tests of continuous current capability and fault current limiting action. Challenges and Objectives Solid-State Current Limiter technology impacts a wide spectrum of utility engineering and operating personnel. It addresses the problems associated with load growth both at Transmission and Distribution class networks. The design concept is pioneering in terms of developing the most efficient and compact power electronics equipment for utility use. The initial test results of the standard building blocks are promising. The independent laboratory tests of the power stack are promising. However the complete 3 phase system needs rigorous testing for performance and reliability. Applications, Values, and Use The SSCL is an intelligent power-electronics device which is modular in design and can provide current limiting or current interrupting capabilities. It can be applied to variety of applications from distribution class to transmission class power delivery grids and networks. It can also be applied to single major commercial and industrial loads and distributed generator supplies. The active switching of devices can be further utilized for protection of substation transformers. The stress on the system can be reduced substantially improving the life of the power system. It minimizes the voltage sag by speedy elimination of heavy fault currents and promises to be an important element of the utility power system. DOE Perspective This development effort is now focused on a 15kV system. This project will help mitigate the challenges of increasing available fault current. DOE has made a major contribution in providing a cost effective SSCL designed to integrate seamlessly into the Transmission and Distribution networks of today and the future. Approach SSCL development program for a 69kV SSCL was initiated which included the use of the Super GTO advanced semiconductor device which won the 2007 R&D100 Award. In the beginning, steps were identified to accomplish the economically viable design of a 69kV class Solid State Current Limiter that is extremely reliable, cost effective, and compact enough to be applied in urban transmission. The prime thrust in design and development was to encompass the 1000A and the 3000A ratings and provide a modular design to cover the wide range of applications. The focus of the project was then shifted to a 15kV class SSCL. The specifications for the 15kV power stack are reviewed. The design changes integrated into the 15kV power stack are discussed. In this Technical Update the complete project is summarized followed by a detailed test report. The power stack independent high voltage laboratory test requirements and results are presented. Keywords Solid State Current Limiter, SSCL, Fault Current Limiter, Fault Current Controller, Power electronics controller, Intelligent power-electronics Device, IED« less

Liquid rocket pressure regulators, relief valves, check valves, burst disks, and explosive valves. [design techniques and practices

NASA Technical Reports Server (NTRS)

1973-01-01

The development of and operational programs for effective use in design are presented for liquid rocket pressure regulators, relief valves, check valves, burst disks, and explosive valves. A review of the total design problem is presented, and design elements are identified which are involved in successful design. Current technology pertaining to these elements is also described. Design criteria are presented which state what rule or standard must be imposed on each essential design element to assure successful design. These criteria serve as a checklist of rules for a project manager to use in guiding a design or in assessing its adequacy. Recommended practices are included which state how to satisfy each of the criteria.

Use of benefit-cost analysis in establishing Federal radiation protection standards: a review

DOE Office of Scientific and Technical Information (OSTI.GOV)

Erickson, L.E.

1979-10-01

This paper complements other work which has evaluated the cost impacts of radiation standards on the nuclear industry. It focuses on the approaches to valuation of the health and safety benefits of radiation standards and the actual and appropriate processes of benefit-cost comparison. A brief historical review of the rationale(s) for the levels of radiation standards prior to 1970 is given. The Nuclear Regulatory Commission (NRC) established numerical design objectives for light water reactors (LWRs). The process of establishing these numerical design criteria below the radiation protection standards set in 10 CFR 20 is reviewed. EPA's 40 CFR 190 environmentalmore » standards for the uranium fuel cycle have lower values than NRC's radiation protection standards in 10 CFR 20. The task of allocating EPA's 40 CFR 190 standards to the various portions of the fuel cycle was left to the implementing agency, NRC. So whether or not EPA's standards for the uranium fuel cycle are more stringent for LWRs than NRC's numerical design objectives depends on how EPA's standards are implemented by NRC. In setting the numerical levels in Appendix I to 10 CFR 50 and 40 CFR 190 NRC and EPA, respectively, focused on the costs of compliance with various levels of radiation control. A major portion of the paper is devoted to a review and critique of the available methods for valuing health and safety benefits. All current approaches try to estimate a constant value of life and use this to vaue the expected number of lives saved. This paper argues that it is more appropriate to seek a value of a reduction in risks to health and life that varies with the extent of these risks. Additional research to do this is recommended. (DC)« less

3D digital headform models of Australian cyclists.

PubMed

Ellena, Thierry; Skals, Sebastian; Subic, Aleksandar; Mustafa, Helmy; Pang, Toh Yen

2017-03-01

Traditional 1D anthropometric data have been the primary source of information used by ergonomists for the dimensioning of head and facial gear. Although these data are simple to use and understand, they only provide univariate measures of key dimensions. 3D anthropometric data, however, describe the complete shape characteristics of the head surface, but are complicated to interpret due to the abundance of information they contain. Consequently, current headform standards based on 1D measurements may not adequately represent the actual head shape variations of the intended user groups. The purpose of this study was to introduce a set of new digital headform models representative of the adult cyclists' community in Australia. Four models were generated based on an Australian 3D anthropometric database of head shapes and a modified hierarchical clustering algorithm. Considerable shape differences were identified between our models and the current headforms from the Australian standard. We conclude that the design of head and facial gear based on current standards might not be favorable for optimal fitting results. Copyright © 2016 Elsevier Ltd. All rights reserved.

Clinical compliance of viewing conditions in radiology reporting environments against current guidelines and standards

NASA Astrophysics Data System (ADS)

Daly, S.; Rainford, L.; Butler, M. L.

2014-03-01

Several studies have demonstrated the importance of environmental conditions in the radiology reporting environment, with many indicating that incorrect parameters could lead to error and misinterpretation. Literature is available with recommendations as to the levels that should be achieved in clinical practice, but evidence of adherence to these guidelines in radiology reporting environments is absent. This study audited the reporting environments of four teleradiologist and eight hospital based radiology reporting areas. This audit aimed to quantify adherence to guidelines and identify differences in the locations with respect to layout and design, monitor distance and angle as well as the ambient factors of the reporting environments. In line with international recommendations, an audit tool was designed to enquire in relation to the layout and design of reporting environments, monitor angle and distances used by radiologists when reporting, as well as the ambient factors such as noise, light and temperature. The review of conditions were carried out by the same independent auditor for consistency. The results obtained were compared against international standards and current research. Each radiology environment was given an overall compliance score to establish whether or not their environments were in line with recommended guidelines. Poor compliance to international recommendations and standards among radiology reporting environments was identified. Teleradiology reporting environments demonstrated greater compliance than hospital environments. The findings of this study identified a need for greater awareness of environmental and perceptual issues in the clinical setting. Further work involving a larger number of clinical centres is recommended.

Design of Standards and Labeling programs in Chile: Techno-Economic Analysis for Refrigerators

DOE Office of Scientific and Technical Information (OSTI.GOV)

Letschert, Virginie E.; McNeil, Michael A.; Pavon, Mariana

2013-05-01

Lawrence Berkeley National Laboratory is a global leader in the study of energy efficiency and its effective implementation through government policy. The Energy Analysis and Environmental Impacts Department of LBNL’s Environmental Energy Technologies Division provides technical assistance to help federal, stat e and local government agencies in the United States, and throughout the world, develop long-term strategies, policy, and programs to encourage energy efficiency in all sectors and industries. In the past, LBNL has assisted staff of various countries government agencies and their con tractors in providing methodologies to analyze cost-effectiveness of regulations and asses s overall national impacts ofmore » efficiency programs. The paper presents the work done in collaboration with the Ministry of Energy (MoE) in Chile and the Collaborative Labeling Appliance Standards Programs (CLASP) on designing a Minimum Energy Performance Standards (MEPS) and ext ending the current labeling program for refrigerators.« less

Hydrogen Safety Issues Compared to Safety Issues with Methane and Propane

NASA Astrophysics Data System (ADS)

Green, M. A.

2006-04-01

The hydrogen economy is not possible if the safety standards currently applied to liquid hydrogen and hydrogen gas by many laboratories are applied to devices that use either liquid or gaseous hydrogen. Methane and propane are commonly used by ordinary people without the special training. This report asks, "How is hydrogen different from flammable gasses that are commonly being used all over the world?" This report compares the properties of hydrogen, methane and propane and how these properties may relate to safety when they are used in both the liquid and gaseous state. Through such an analysis, sensible safety standards for the large-scale (or even small-scale) use of liquid and gaseous hydrogen systems can be developed. This paper is meant to promote discussion of issues related to hydrogen safety so that engineers designing equipment can factor sensible safety standards into their designs.

Flying Unmanned Aircraft: A Pilot's Perspective

NASA Technical Reports Server (NTRS)

Pestana, Mark E.

2011-01-01

The National Aeronautics and Space Administration (NASA) is pioneering various Unmanned Aircraft System (UAS) technologies and procedures which may enable routine access to the National Airspace System (NAS), with an aim for Next Gen NAS. These tools will aid in the development of technologies and integrated capabilities that will enable high value missions for science, security, and defense, and open the door to low-cost, extreme-duration, stratospheric flight. A century of aviation evolution has resulted in accepted standards and best practices in the design of human-machine interfaces, the displays and controls of which serve to optimize safe and efficient flight operations and situational awareness. The current proliferation of non-standard, aircraft-specific flight crew interfaces in UAS, coupled with the inherent limitations of operating UAS without in-situ sensory input and feedback (aural, visual, and vestibular cues), has increased the risk of mishaps associated with the design of the "cockpit." The examples of current non- or sub- standard design features range from "annoying" and "inefficient", to those that are difficult to manipulate or interpret in a timely manner, as well as to those that are "burdensome" and "unsafe." A concerted effort is required to establish best practices and standards for the human-machine interfaces, for the pilot as well as the air traffic controller. In addition, roles, responsibilities, knowledge, and skill sets are subject to redefining the terms, "pilot" and "air traffic controller", with respect to operating UAS, especially in the Next-Gen NAS. The knowledge, skill sets, training, and qualification standards for UAS operations must be established, and reflect the aircraft-specific human-machine interfaces and control methods. NASA s recent experiences flying its MQ-9 Ikhana in the NAS for extended duration, has enabled both NASA and the FAA to realize the full potential for UAS, as well as understand the implications of current limitations. Ikhana is a Predator-B/Reaper UAS, built by General Atomics, Aeronautical Systems, Inc., and modified for research. Since 2007, the aircraft has been flown seasonally with a wing-mounted pod containing an infrared scanner, utilized to provide real-time wildfire geo-location data to various fire-fighting agencies in the western U.S. The multi-agency effort included an extensive process to obtain flight clearance from the FAA to operate under special provisions, given that UAS in general do not fully comply with current airspace regulations (e.g. sense-and-avoid requirements).

Magnetic Johnson Noise Constraints on Electron Electric Dipole Moment Experiments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Munger, C.

2004-11-18

Magnetic fields from statistical fluctuations in currents in conducting materials broaden atomic linewidths by the Zeeman effect. The constraints so imposed on the design of experiments to measure the electric dipole moment of the electron are analyzed. Contrary to the predictions of Lamoreaux [S.K. Lamoreaux, Phys. Rev. A60, 1717(1999)], the standard material for high-permeability magnetic shields proves to be as significant a source of broadening as an ordinary metal. A scheme that would replace this standard material with ferrite is proposed.

Floating Gate sensor for in-vivo dosimetry in radiation therapies. Design and first characterization.

NASA Astrophysics Data System (ADS)

Faigon, A.; Martinez Vazquez, I.; Carbonetto, S.; García Inza, M.; G

2017-01-01

A floating gate dosimeter was designed and fabricated in a standard CMOS technology. The design guides and characterization are presented. The characterization included the controlled charging by tunneling of the floating gate, and its discharging under irradiation while measuring the transistor drain current whose change is the measure of the absorbed dose. The resolution of the obtained device is close to 1 cGy satisfying the requirements for most radiation therapies dosimetry. Pending statistical proofs, the dosimeter is a potential candidate for wide in-vivo control of radiotherapy treatments.

Fully Disposable Manufacturing Concepts for Clinical and Commercial Manufacturing and Ballroom Concepts.

PubMed

Boedeker, Berthold; Goldstein, Adam; Mahajan, Ekta

2017-11-04

The availability and use of pre-sterilized disposables has greatly changed the methods used in biopharmaceuticals development and production, particularly from mammalian cell culture. Nowadays, almost all process steps from cell expansion, fermentation, cell removal, and purification to formulation and storage of drug substances can be carried out in disposables, although there are still limitations with single-use technologies, particularly in the areas of pretesting and quality control of disposables, bag and connections standardization and qualification, extractables and leachables (E/L) validation, and dependency on individual vendors. The current status of single-use technologies is summarized for all process unit operations using a standard mAb process as an example. In addition, current pros and cons of using disposables are addressed in a comparative way, including quality control and E/L validation.The continuing progress in developing single-use technologies has an important impact on manufacturing facilities, resulting in much faster, less expensive and simpler plant design, start-up, and operation, because cell culture process steps are no longer performed in hard-piped unit operations. This leads to simpler operations in a lab-like environment. Overall it enriches the current landscape of available facilities from standard hard-piped to hard-piped/disposables hybrid to completely single-use-based production plants using the current segregation and containment concept. At the top, disposables in combination with completely and functionally closed systems facilitate a new, revolutionary design of ballroom facilities without or with much less segregation, which enables us to perform good manufacturing practice manufacturing of different products simultaneously in unclassified but controlled areas.Finally, single-use processing in lab-like shell facilities is a big enabler of transferring and establishing production in emergent countries, and this is described in more detail in 7. Graphical Abstract.

BRACING IN THE TREATMENT OF CHILDREN WITH CLUBFOOT: PAST, PRESENT, AND FUTURE

PubMed Central

Desai, Lajja; Oprescu, Florin; DiMeo, Andrew; Morcuende, Jose A

2010-01-01

Bracing is a critical component of the current standard of treatment for clubfoot. Adherence to the bracing protocol is the main factor for the long-term success of the treatment The purpose of this paper is to provide a review of clubfoot braces, best practices in brace design and recommendations for bracing in order to improve adherence with the bracing phase of the clubfoot treatment. There are a number of designs and offerings of braces available in various regions of the world. Although many new brace designs are being proposed and developed, evidence in the literature regarding biomechanical effects, clinical outcomes, functionality and patient adherence is limited. The current research that is available regarding brace design focuses on increasing patient comfort and satisfaction to improve adherence. Although the currently available braces are widely distributed in developed countries, access is limited to many parts of the world. When considering the future of the clubfoot treatment and prevention of relapses, since 80% of the cases are in developing countries with limited resources, brace cost and availability needs to be assessed. PMID:21045966

Proteomics Standards Initiative: Fifteen Years of Progress and Future Work

PubMed Central

2017-01-01

The Proteomics Standards Initiative (PSI) of the Human Proteome Organization (HUPO) has now been developing and promoting open community standards and software tools in the field of proteomics for 15 years. Under the guidance of the chair, cochairs, and other leadership positions, the PSI working groups are tasked with the development and maintenance of community standards via special workshops and ongoing work. Among the existing ratified standards, the PSI working groups continue to update PSI-MI XML, MITAB, mzML, mzIdentML, mzQuantML, mzTab, and the MIAPE (Minimum Information About a Proteomics Experiment) guidelines with the advance of new technologies and techniques. Furthermore, new standards are currently either in the final stages of completion (proBed and proBAM for proteogenomics results as well as PEFF) or in early stages of design (a spectral library standard format, a universal spectrum identifier, the qcML quality control format, and the Protein Expression Interface (PROXI) web services Application Programming Interface). In this work we review the current status of all of these aspects of the PSI, describe synergies with other efforts such as the ProteomeXchange Consortium, the Human Proteome Project, and the metabolomics community, and provide a look at future directions of the PSI. PMID:28849660

Proteomics Standards Initiative: Fifteen Years of Progress and Future Work.

PubMed

Deutsch, Eric W; Orchard, Sandra; Binz, Pierre-Alain; Bittremieux, Wout; Eisenacher, Martin; Hermjakob, Henning; Kawano, Shin; Lam, Henry; Mayer, Gerhard; Menschaert, Gerben; Perez-Riverol, Yasset; Salek, Reza M; Tabb, David L; Tenzer, Stefan; Vizcaíno, Juan Antonio; Walzer, Mathias; Jones, Andrew R

2017-12-01

The Proteomics Standards Initiative (PSI) of the Human Proteome Organization (HUPO) has now been developing and promoting open community standards and software tools in the field of proteomics for 15 years. Under the guidance of the chair, cochairs, and other leadership positions, the PSI working groups are tasked with the development and maintenance of community standards via special workshops and ongoing work. Among the existing ratified standards, the PSI working groups continue to update PSI-MI XML, MITAB, mzML, mzIdentML, mzQuantML, mzTab, and the MIAPE (Minimum Information About a Proteomics Experiment) guidelines with the advance of new technologies and techniques. Furthermore, new standards are currently either in the final stages of completion (proBed and proBAM for proteogenomics results as well as PEFF) or in early stages of design (a spectral library standard format, a universal spectrum identifier, the qcML quality control format, and the Protein Expression Interface (PROXI) web services Application Programming Interface). In this work we review the current status of all of these aspects of the PSI, describe synergies with other efforts such as the ProteomeXchange Consortium, the Human Proteome Project, and the metabolomics community, and provide a look at future directions of the PSI.

Information Technology Training within Traineeships: Options for TAFE-Based Courses.

ERIC Educational Resources Information Center

Hall, W.; And Others

A study explored ways in which traineeship courses could be designed to include training in information technology. The skills and performance standards required of information technology training in the printing, tourism, banking, construction, and computer industries were identified. Next, the current provision of such training in Australia and…

A PRELIMINARY EVALUATION OF MODELS-3 CMAQ USING PARTICULATE MATTER DATA FROM THE IMPROVE NETWORK

EPA Science Inventory

The Clean Air Act and its Amendments require the United States Environmental Protection Agency (EPA) to establish National Ambient Air Quality Standards for Particulate Matter (PM) and to assess current and future air quality regulations designed to protect human health and wel...

Designing and Validating Assessments of Complex Thinking in Science

ERIC Educational Resources Information Center

Ryoo, Kihyun; Linn, Marcia C.

2015-01-01

Typical assessment systems often measure isolated ideas rather than the coherent understanding valued in current science classrooms. Such assessments may motivate students to memorize, rather than to use new ideas to solve complex problems. To meet the requirements of the Next Generation Science Standards, instruction needs to emphasize sustained…

Technologies for Education: A Practical Guide. Fourth Edition.

ERIC Educational Resources Information Center

Barron, Ann E.; Orwig, Gary W.; Ivers, Karen S.; Lilavois, Nick

This book offers an updated look at the technologies that are impacting education. Designed for educators who are interested in the instructional applications of technology, the book provides information about current technology standards for students and teachers, as well as research related to the effectiveness of technology in education. It…

77 FR 56265 - Proposed Information Collection Submitted to the Office of Management and Budget (OMB); Request...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-12

... the second experiment will evaluate the lack of effectiveness in current audible warnings designed to...: Title: Recruitment of human subjects for observational experiments regarding keyless ignition controls... motor vehicle safety standards (FMVSSs). Human factors observational experiments are proposed to support...

Your Science Classroom: Becoming an Elementary/Middle School Science Teacher

ERIC Educational Resources Information Center

Goldston, M. Jenice; Downey, Laura

2012-01-01

Designed around a practical "practice-what-you-teach" approach to methods instruction, "Your Science Classroom: Becoming an Elementary/Middle School Science Teacher" is based on current constructivist philosophy, organized around 5E inquiry, and guided by the National Science Education Teaching Standards. Written in a reader-friendly style, the…

Schooling for Democracy

ERIC Educational Resources Information Center

Noddings, Nel

2008-01-01

The author of this article contends that current efforts at school reform--ostensibly designed to increase equality of outcomes--may actually be undermining democracy by undervaluing the wide range of talents required in 21st-century America. Many policy makers today argue that all students should have a standard curriculum that will prepare them…

78 FR 65632 - Centralized Capacity Markets in Regional Transmission Organizations and Independent System...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-01

... capacity product, as under current market designs, are there certain fundamental performance standards that... necessary for capacity investment? PJM offers LSEs the alternative to opt out of its capacity auction by... transmission may substitute for capacity resources. How can investment in capacity and transmission planning be...

Neutrinos

Science.gov Websites

Neutrinos What are they? Neutrinos are members of the Standard Model, belonging to a class of the mass could be and the mass differences between flavors of neutrinos, although there are many current experiments designed to probe this question. The difficulty lies in the fact that neutrinos are

Effectiveness of Existing Eye Safety Legislation in Arizona.

ERIC Educational Resources Information Center

Gillaspy, Roy Eugene

This study was designed to ascertain the current practices of eye safety in Arizona high school industrial education laboratories, including the enforcement of eye safety legislation, use of eye protection devices, how the eye ware meets the American National Standards Institute specifications, and the teachers' interpretations of the existing eye…

NASA-STD 3001 and the Human Integration Design Handbook (HIDH): Evolution of NASA-STD-3000

NASA Technical Reports Server (NTRS)

Pickett, Lynn; Connolly, Janis; Arch, M.; Tillman, Barry; Russo, Dane

2007-01-01

The Habitability & Environmental Factors and Space Medicine Divisions have developed the Space Flight Human System Standard (SFHSS) (NASA-STD-3001) to replace NASA-STD-3000 as a new NASA standard for all human spaceflight programs. The SFHSS is composed of 2 volumes. Volume 1, Crew Health, contains medical levels of care, permissible exposure limits, and fitness for duty criteria, and permissible outcome limits as a means of defining successful operating criteria for the human system. Volume 2, Habitability and Environmental Health, contains environmental, habitability and human factors standards. Development of the Human Integration Design Handbook (HIDH), a companion to the standard, is currently under construction and entails the update and revision of NASA-STD-3000 data. This new handbook will, in the fashion of NASA STD-3000, assist engineers and designers in appropriately applying habitability, environmental and human factors principles to spacecraft design. Organized in a chapter-module-element structure, the HIDH will provide the guidance for the development of requirements, design considerations, lessons learned, example solutions, background research, and assist in the identification of gaps and research needs in the disciplines. Subject matter experts have been and continue to be solicited to participate in the update of the chapters. The purpose is to build the HIDH with the best and latest data, and provide a broad representation from experts in industry, academia, the military and the space program. The handbook and the two standards volumes work together in a unique way to achieve the required level of human-system interface. All new NASA programs will be required to meet Volumes 1 and 2. Volume 2 presents human interface goals in broad, non-verifiable standards. Volume 2 also requires that each new development program prepare a set of program-specific human factors requirements. These program-specific human and environmental factors requirements must be verifiable and tailored to assure the new system meets the Volume 2 standards. Programs will use the HIDH to write their verifiable program-specific requirements.

Data Availability in Appliance Standards and Labeling Program Development and Evaluation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Romankiewicz, John; Khanna, Nina; Vine, Edward

2013-05-01

In this report, we describe the necessary data inputs for both standards development and program evaluation and perform an initial assessment of the availability and uncertainty of those data inputs in China. For standards development, we find that China and its standards and labeling program administrators currently has access to the basic market and technical data needed for conducting market and technology assessment and technological and economic analyses. Some data, such as shipments data, is readily available from the China Energy Label product registration database while the availability of other data, including average unit energy consumption, prices and design options,more » needs improvement. Unlike some other countries such as the United States, most of the necessary data for conducting standards development analyses are not publicly available or compiled in a consolidated data source. In addition, improved data on design and efficiency options as well as cost data (e.g., manufacturing costs, mark-ups, production and product use-phase costs) – key inputs to several technoeconomic analyses – are particularly in need given China’s unconsolidated manufacturing industry. For program evaluation, we find that while China can conduct simple savings evaluations on its incentive programs with the data it currently has available from the Ministry of Finance – the program administrator, the savings estimates produced by such an evaluation will carry high uncertainty. As such, China could benefit from an increase in surveying and metering in the next one to three years to decrease the uncertainty surrounding key data points such as unit energy savings and free ridership.« less

Pediatric Drowning: A Standard Operating Procedure to Aid the Prehospital Management of Pediatric Cardiac Arrest Resulting From Submersion.

PubMed

Best, Rebecca R; Harris, Benjamin H L; Walsh, Jason L; Manfield, Timothy

2017-05-08

Drowning is one of the leading causes of death in children. Resuscitating a child following submersion is a high-pressure situation, and standard operating procedures can reduce error. Currently, the Resuscitation Council UK guidance does not include a standard operating procedure on pediatric drowning. The objective of this project was to design a standard operating procedure to improve outcomes of drowned children. A literature review on the management of pediatric drowning was conducted. Relevant publications were used to develop a standard operating procedure for management of pediatric drowning. A concise standard operating procedure was developed for resuscitation following pediatric submersion. Specific recommendations include the following: the Heimlich maneuver should not be used in this context; however, prolonged resuscitation and therapeutic hypothermia are recommended. This standard operating procedure is a potentially useful adjunct to the Resuscitation Council UK guidance and should be considered for incorporation into its next iteration.

Universal Design Criteria in Standards and Codes About Accessibility of Built Environments in Brazil.

PubMed

Guimarães, Marcelo Pinto

2016-01-01

This paper includes some criticism in analysis of the development and implementation of the national standards for accessibility of the built environment in Brazil, i.e., the NBR9050. Currently, the 2015 version of it resembles an encyclopaedia including a variety of exotic contributions gathered historically from different sources; however, that characteristic makes it work like a puzzle that keeps alive prejudices about users' needs and disabilities. Besides, there are conflicts between recommended ideas and previous requirements from older versions. The definition of Universal Design has been published since 2004, but there is still no indication of how to make the principles work in practice. Therefore, it is very hard for city officials to assess quality of environments, and professionals have serious constraints to explore their skills further while addressing users' diversified needs. Certainly, the current NBR9050 requires further editorial work. Nevertheless, an important decision is necessary: it is important to organize information so that readers may identify in each topic whether Universal Design application can be achieved or whether the proposed technical solution may lead to construction of limited spatial adaptation and reach only some poor accommodation of users with uncommon needs. Presenting some examples in context of socially inclusive environments, the newer revised version of NBR9050 is necessary to explain about pitfalls of bad design of accessibility for discriminated disabled users. Readers should be able to establish conceptual links between the best ideas so that Universal Design could be easily understood.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Supanich, M.

The International Electrotechnical Commission (IEC) writes standards that manufacturers of electrical equipment must comply with. Medical electrical equipment, such as medical imaging, radiation therapy, and radiation dosimetry devices, fall under Technical Committee 62. Of particular interest to medical physicists are the standards developed within Subcommittees (SC) 62B, which addresses diagnostic radiological imaging equipment, and 62C, which addresses equipment for radiation therapy, nuclear medicine and dosimetry. For example, a Working Group of SC 62B is responsible for safety and quality assurance standards for CT scanners and a Working Group of SC 62C is responsible for standards that set requirements for dosimetricmore » safety and accuracy of linacs and proton accelerators. IEC standards thus have an impact on every aspect of a medical physicist’s job, including equipment testing, shielding design, room layout, and workflow. Consequently, it is imperative that US medical physicists know about existing standards, as well as have input on those under development or undergoing revision. The structure of the IEC and current standards development work will be described in detail. The presentation will explain how US medical physicists can learn about IEC standards and contribute to their development. Learning Objectives: Learn about the structure of the IEC and the influence that IEC standards have on the design of equipment for radiology and radiation therapy. Learn about the mechanisms by which the US participates in the development and revision of standards. Understand the specific requirements of several standards having direct relevance to diagnostic and radiation therapy physicists.« less

Adapting the design of Anesthesia Information Management Systems to innovations depicted in Industrial Property documents.

PubMed

Spyropoulos, B; Tzavaras, A; Zogogianni, D; Botsivaly, M

2013-01-01

The purpose of this paper is to present the design and the current development status of an Anesthesia Information Management System (AIMS). For this system, the physical and technical advances, depicted in relevant, recently published Industrial Property documents, have been taken into account. Additional innovative sensors create further data-load to be managed. Novel wireless data-transmission modes demand eventually compliance to further proper standards, so that interoperability between AIMS and the existing Hospital Information Systems is being sustained. We attempted to define, the state-of-the-art concerning the functions, the design-prerequisites and the relevant standards and of an "emerging" AIMS that is combining hardware innovation, real-time data acquisition, processing and displaying and lastly enabling the necessary interoperability with the other components of the existing Hospital Information Systems. Finally, we report based on this approach, about the design and implementation status, of our "real-world" system under development and discuss the multifarious obstacles encountered during this still on-going project.

Design and Realization of Online Monitoring System of Distributed New Energy and Renewable Energy

NASA Astrophysics Data System (ADS)

Tang, Yanfen; Zhou, Tao; Li, Mengwen; Zheng, Guotai; Li, Hao

2018-01-01

Aimed at difficult centralized monitoring and management of current distributed new energy and renewable energy generation projects due to great varieties, different communication protocols and large-scale difference, this paper designs a online monitoring system of new energy and renewable energy characterized by distributed deployment, tailorable functions, extendible applications and fault self-healing performance. This system is designed based on international general standard for grid information data model, formulates unified data acquisition and transmission standard for different types of new energy and renewable energy generation projects, and can realize unified data acquisition and real-time monitoring of new energy and renewable energy generation projects, such as solar energy, wind power, biomass energy, etc. within its jurisdiction. This system has applied in Beijing. At present, 576 projects are connected to the system. Good effect is achieved and stability and reliability of the system have been validated.

Adiabatic quantum-flux-parametron cell library designed using a 10 kA cm-2 niobium fabrication process

NASA Astrophysics Data System (ADS)

Takeuchi, Naoki; Nagasawa, Shuichi; China, Fumihiro; Ando, Takumi; Hidaka, Mutsuo; Yamanashi, Yuki; Yoshikawa, Nobuyuki

2017-03-01

Adiabatic quantum-flux-parametron (AQFP) logic is an energy-efficient superconductor logic with zero static power consumption and very small switching energy. In this paper, we report a new AQFP cell library designed using the AIST 10 kA cm-2 Nb high-speed standard process (HSTP), which is a high-critical-current-density version of the AIST 2.5 kA cm-2 Nb standard process (STP2). Since the intrinsic damping of the Josephson junction (JJ) of HSTP is relatively strong, shunt resistors for JJs were removed and the energy efficiency improved significantly. Also, excitation transformers in the new cells were redesigned so that the cells can operate in a four-phase excitation mode. We described the detail of HSTP and the AQFP cell library designed using HSTP, and showed experimental results of cell test circuits.

An Overview of the Challenges in Designing, Integrating, and Delivering BARD: A Public Chemical-Biology Resource and Query Portal for Multiple Organizations, Locations, and Disciplines.

PubMed

de Souza, Andrea; Bittker, Joshua A; Lahr, David L; Brudz, Steve; Chatwin, Simon; Oprea, Tudor I; Waller, Anna; Yang, Jeremy J; Southall, Noel; Guha, Rajarshi; Schürer, Stephan C; Vempati, Uma D; Southern, Mark R; Dawson, Eric S; Clemons, Paul A; Chung, Thomas D Y

2014-06-01

Recent industry-academic partnerships involve collaboration among disciplines, locations, and organizations using publicly funded "open-access" and proprietary commercial data sources. These require the effective integration of chemical and biological information from diverse data sources, which presents key informatics, personnel, and organizational challenges. The BioAssay Research Database (BARD) was conceived to address these challenges and serve as a community-wide resource and intuitive web portal for public-sector chemical-biology data. Its initial focus is to enable scientists to more effectively use the National Institutes of Health Roadmap Molecular Libraries Program (MLP) data generated from the 3-year pilot and 6-year production phases of the Molecular Libraries Probe Production Centers Network (MLPCN), which is currently in its final year. BARD evolves the current data standards through structured assay and result annotations that leverage BioAssay Ontology and other industry-standard ontologies, and a core hierarchy of assay definition terms and data standards defined specifically for small-molecule assay data. We initially focused on migrating the highest-value MLP data into BARD and bringing it up to this new standard. We review the technical and organizational challenges overcome by the interdisciplinary BARD team, veterans of public- and private-sector data-integration projects, who are collaborating to describe (functional specifications), design (technical specifications), and implement this next-generation software solution. © 2014 Society for Laboratory Automation and Screening.

Single-Case Experimental Designs: A Systematic Review of Published Research and Current Standards

PubMed Central

Smith, Justin D.

2013-01-01

This article systematically reviews the research design and methodological characteristics of single-case experimental design (SCED) research published in peer-reviewed journals between 2000 and 2010. SCEDs provide researchers with a flexible and viable alternative to group designs with large sample sizes. However, methodological challenges have precluded widespread implementation and acceptance of the SCED as a viable complementary methodology to the predominant group design. This article includes a description of the research design, measurement, and analysis domains distinctive to the SCED; a discussion of the results within the framework of contemporary standards and guidelines in the field; and a presentation of updated benchmarks for key characteristics (e.g., baseline sampling, method of analysis), and overall, it provides researchers and reviewers with a resource for conducting and evaluating SCED research. The results of the systematic review of 409 studies suggest that recently published SCED research is largely in accordance with contemporary criteria for experimental quality. Analytic method emerged as an area of discord. Comparison of the findings of this review with historical estimates of the use of statistical analysis indicates an upward trend, but visual analysis remains the most common analytic method and also garners the most support amongst those entities providing SCED standards. Although consensus exists along key dimensions of single-case research design and researchers appear to be practicing within these parameters, there remains a need for further evaluation of assessment and sampling techniques and data analytic methods. PMID:22845874

LINCS: Livermore's network architecture. [Octopus computing network

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fletcher, J.G.

1982-01-01

Octopus, a local computing network that has been evolving at the Lawrence Livermore National Laboratory for over fifteen years, is currently undergoing a major revision. The primary purpose of the revision is to consolidate and redefine the variety of conventions and formats, which have grown up over the years, into a single standard family of protocols, the Livermore Interactive Network Communication Standard (LINCS). This standard treats the entire network as a single distributed operating system such that access to a computing resource is obtained in a single way, whether that resource is local (on the same computer as the accessingmore » process) or remote (on another computer). LINCS encompasses not only communication but also such issues as the relationship of customer to server processes and the structure, naming, and protection of resources. The discussion includes: an overview of the Livermore user community and computing hardware, the functions and structure of each of the seven layers of LINCS protocol, the reasons why we have designed our own protocols and why we are dissatisfied by the directions that current protocol standards are taking.« less

Water impacts of CO2 emission performance standards for fossil fuel-fired power plants.

PubMed

Talati, Shuchi; Zhai, Haibo; Morgan, M Granger

2014-10-21

We employ an integrated systems modeling tool to assess the water impacts of the new source performance standards recently proposed by the U.S. Environmental Protection Agency for limiting CO2 emissions from coal- and gas-fired power plants. The implementation of amine-based carbon capture and storage (CCS) for 40% CO2 capture to meet the current proposal will increase plant water use by roughly 30% in supercritical pulverized coal-fired power plants. The specific amount of added water use varies with power plant and CCS designs. More stringent emission standards than the current proposal would require CO2 emission reductions for natural gas combined-cycle (NGCC) plants via CCS, which would also increase plant water use. When examined over a range of possible future emission standards from 1100 to 300 lb CO2/MWh gross, new baseload NGCC plants consume roughly 60-70% less water than coal-fired plants. A series of adaptation approaches to secure low-carbon energy production and improve the electric power industry's water management in the face of future policy constraints are discussed both quantitatively and qualitatively.

Improved lossless intra coding for H.264/MPEG-4 AVC.

PubMed

Lee, Yung-Lyul; Han, Ki-Hun; Sullivan, Gary J

2006-09-01

A new lossless intra coding method based on sample-by-sample differential pulse code modulation (DPCM) is presented as an enhancement of the H.264/MPEG-4 AVC standard. The H.264/AVC design includes a multidirectional spatial prediction method to reduce spatial redundancy by using neighboring samples as a prediction for the samples in a block of data to be encoded. In the new lossless intra coding method, the spatial prediction is performed based on samplewise DPCM instead of in the block-based manner used in the current H.264/AVC standard, while the block structure is retained for the residual difference entropy coding process. We show that the new method, based on samplewise DPCM, does not have a major complexity penalty, despite its apparent pipeline dependencies. Experiments show that the new lossless intra coding method reduces the bit rate by approximately 12% in comparison with the lossless intra coding method previously included in the H.264/AVC standard. As a result, the new method is currently being adopted into the H.264/AVC standard in a new enhancement project.

Comparison of isolated cranberry (Vaccinium macrocarpon Ait.) proanthocyanidins to catechin and procyanidins A2 and B2 for use as standards in the 4-(dimethylamino)cinnamaldehyde assay.

PubMed

Feliciano, Rodrigo P; Shea, Michael P; Shanmuganayagam, Dhanansayan; Krueger, Christian G; Howell, Amy B; Reed, Jess D

2012-05-09

The 4-(dimethylamino)cinnamaldehyde (DMAC) assay is currently used to quantify proanthocyanidin (PAC) content in cranberry products. However, this method suffers from issues of accuracy and precision in the analysis and comparison of PAC levels across a broad range of cranberry products. Current use of procyanidin A2 as a standard leads to an underestimation of PACs content in certain cranberry products, especially those containing higher molecular weight PACs. To begin to address the issue of accuracy, a method for the production of a cranberry PAC standard, derived from an extraction of cranberry (c-PAC) press cake, was developed and evaluated. Use of the c-PAC standard to quantify PAC content in cranberry samples resulted in values that were 2.2 times higher than those determined by procyanidin A2. Increased accuracy is critical for estimating PAC content in relationship to research on authenticity, efficacy, and bioactivity, especially in designing clinical trials for determination of putative health benefits.

An oral health intervention for people with serious mental illness (Three Shires Early Intervention Dental Trial): study protocol for a randomised controlled trial.

PubMed

Jones, Hannah F; Adams, Clive E; Clifton, Andrew; Simpson, Jayne; Tosh, Graeme; Liddle, Peter F; Callaghan, Patrick; Yang, Min; Guo, Boliang; Furtado, Vivek

2013-05-29

Oral health is an important part of general physical health and is essential for self-esteem, self-confidence and overall quality of life. There is a well-established link between mental illness and poor oral health. Oral health problems are not generally well recognized by mental health professionals and many patients experience barriers to treatment. This is the protocol for a pragmatic cluster randomised trial that has been designed to fit within standard care. Dental awareness training for care co-ordinators plus a dental checklist for service users in addition to standard care will be compared with standard care alone for people with mental illness. The checklist consists of questions about service users' current oral health routine and condition. Ten Early Intervention in Psychosis (EIP) teams in Nottinghamshire, Derbyshire and Lincolnshire will be cluster randomised (five to intervention and five to standard care) in blocks accounting for location and size of caseload. The oral health of the service users will be monitored for one year after randomisation. Current Controlled Trials ISRCTN63382258.

APhA 2011 REMS white paper: Summary of the REMS stakeholder meeting on improving program design and implementation.

PubMed

American Pharmacists Association; Bough, Marcie

2011-01-01

To develop an improved risk evaluation and mitigation strategies (REMS) system for maximizing effective and safe patient medication use while minimizing burden on the health care delivery system. 34 stakeholders gathered October 6-7, 2010, in Arlington, VA, for the REMS Stakeholder Meeting, convened by the American Pharmacists Association (APhA). Participants included national health care provider associations, including representatives for physicians, physician assistants, nurses, nurse practitioners, and pharmacists, as well as representatives for patient advocates, drug distributors, community pharmacists (chain and independent), drug manufacturer associations (brand, generic, and biologic organizations), and health information technology, standards, and safety organizations. Staff from the Food and Drug Administration (FDA) Center for Drug Evaluation and Research participated as observers. The meeting built on themes from the APhA's 2009 REMS white paper. The current REMS environment presents many challenges for health care providers due to the growing number of REMS programs and the lack of standardization or similarities among various REMS programs. A standardized REMS process that focuses on maximizing patient safety and minimizing impacts on patient access and provider implementation could offset these challenges. A new process that includes effective provider interventions and standardized tools and systems for implementing REMS programs may improve patient care and overcome some of the communication issues providers and patients currently face. Metrics could be put in place to evaluate the effectiveness of REMS elements. By incorporating REMS program components into existing technologies and data infrastructures, achieving REMS implementation that is workflow neutral and minimizes administrative burden may be possible. An appropriate compensation model could ensure providers have adequate resources for patient care and REMS implementation. Overall, stakeholders should continue to work collaboratively with FDA and manufacturers to improve REMS program design and implementation issues. A workable REMS system will require effective patient interventions, standardized elements that limit barriers to implementation for both patients and providers, standardized yet flexible implementation strategies, use of existing technologies in practice settings, increased opportunities for provider input early in REMS design processes, improved communication strategies and awareness of program requirements, and viable provider compensation models needed to offset costs to implement and comply with REMS program requirements.

A 10 Kelvin Magnet for Space-Flight ADRs

NASA Technical Reports Server (NTRS)

Tuttle, James; Pourrahimi, Shahin; Shirron, Peter; Canavan, Edgar; DiPirro, Michael; Riall, Sara

2003-01-01

Future NASA missions will include detectors cooled by adiabatic demagnetization refrigerators (ADRs) coupled with mechanical cryocoolers. A lightweight, low-current 10 Kelvin magnet would allow the interface between these devices to be at temperatures as high as 10 Kelvin, adding flexibility to the instrument design. We report on the testing of a standard-technology Nb3Sn magnet and the development of a lightweight, low-current 10 Kelvin magnet. We also discuss the outlook for flying a 10 Kelvin magnet as part of an ADR system.

Integrated Circuit Design of 3 Electrode Sensing System Using Two-Stage Operational Amplifier

NASA Astrophysics Data System (ADS)

Rani, S.; Abdullah, W. F. H.; Zain, Z. M.; N, Aqmar N. Z.

2018-03-01

This paper presents the design of a two-stage operational amplifier(op amp) for 3-electrode sensing system readout circuits. The designs have been simulated using 0.13μm CMOS technology from Silterra (Malaysia) with Mentor graphics tools. The purpose of this projects is mainly to design a miniature interfacing circuit to detect the redox reaction in the form of current using standard analog modules. The potentiostat consists of several op amps combined together in order to analyse the signal coming from the 3-electrode sensing system. This op amp design will be used in potentiostat circuit device and to analyse the functionality for each module of the system.

The international development of forensic science standards - A review.

PubMed

Wilson-Wilde, Linzi

2018-04-16

Standards establish specifications and procedures designed to ensure products, services and systems are safe, reliable and consistently perform as intended. Standards can be used in the accreditation of forensic laboratories or facilities and in the certification of products and services. In recent years there have been various international activities aiming at developing forensic science standards and guidelines. The most significant initiative currently underway within the global forensic community is the development of International Organization for Standardization (ISO) standards. This paper reviews the main bodies working on standards for forensic science, the processes used and the implications for accreditation. This paper specifically discusses the work of ISO Technical Committee TC272, the future TC272 work program for the development of forensic science standards and associated timelines. Also discussed, are the lessons learnt to date in navigating the complex environment of multi-country stakeholder deliberations in standards development. Crown Copyright © 2018. Published by Elsevier B.V. All rights reserved.

Applying Registry Services to Spaceflight Technologies to Aid in the Assignment of Assigned Numbers to Disparate Systems and their Technologies to Further Enable Interoperability

NASA Technical Reports Server (NTRS)

Bradford, Robert N.; Nichols, Kelvin F.; Witherspoon, Keith R.

2006-01-01

To date very little effort has been made to provide interoperability between various space agency projects. To effectively get to the Moon and beyond systems must interoperate. To provide interoperability, standardization and registries of various technologies will be required. These registries will be created as they relate to space flight. With the new NASA Moon/Mars initiative, a requirement to standardize and control the naming conventions of very disparate systems and technologies is emerging. The need to provide numbering to the many processes, schemas, vehicles, robots, space suits and technologies (e.g. versions), to name a few, in the highly complex Constellation initiative is imperative. The number of corporations, developer personnel, system interfaces, people interfaces will require standardization and registries on a scale not currently envisioned. It would only take one exception (stove piped system development) to weaken, if not, destroy interoperability. To start, a standardized registry process must be defined that allows many differing engineers, organizations and operators the ability to easily access disparate registry information across numerous technological and scientific disciplines. Once registries are standardized the need to provide registry support in terms of setup and operations, resolution of conflicts between registries and other issues will need to be addressed. Registries should not be confused with repositories. No end user data is "stored" in a registry nor is it a configuration control system. Once a registry standard is created and approved, the technologies that should be registered must be identified and prioritized. In this paper, we will identify and define a registry process that is compatible with the Constellation initiative and other non related space activities and organizations. We will then identify and define the various technologies that should use a registry to provide interoperability. The first set of technologies will be those that are currently in need of expansion namely the assignment of satellite designations and the process which controls assignments. Second, we will analyze the technologies currently standardized under the Consultative Committee for Space Data Systems (CCSDS) banner. Third, we will analyze the current CCSDS working group and Birds of a Feather (BoF) activities to ascertain registry requirements. Lastly, we will identify technologies that are either currently under the auspices of another standards body or technologies that are currently not standardized. For activities one through three, we will provide the analysis by either discipline or technology with rationale, identification and brief description of requirements and precedence. For activity four, we will provide a list of current standards bodies e.g. IETF and a list of potential candidates.

Constant-current control method of multi-function electromagnetic transmitter.

PubMed

Xue, Kaichang; Zhou, Fengdao; Wang, Shuang; Lin, Jun

2015-02-01

Based on the requirements of controlled source audio-frequency magnetotelluric, DC resistivity, and induced polarization, a constant-current control method is proposed. Using the required current waveforms in prospecting as a standard, the causes of current waveform distortion and current waveform distortion's effects on prospecting are analyzed. A cascaded topology is adopted to achieve 40 kW constant-current transmitter. The responsive speed and precision are analyzed. According to the power circuit of the transmitting system, the circuit structure of the pulse width modulation (PWM) constant-current controller is designed. After establishing the power circuit model of the transmitting system and the PWM constant-current controller model, analyzing the influence of ripple current, and designing an open-loop transfer function according to the amplitude-frequency characteristic curves, the parameters of the PWM constant-current controller are determined. The open-loop transfer function indicates that the loop gain is no less than 28 dB below 160 Hz, which assures the responsive speed of the transmitting system; the phase margin is 45°, which assures the stabilization of the transmitting system. Experimental results verify that the proposed constant-current control method can keep the control error below 4% and can effectively suppress load change caused by the capacitance of earth load.

Constant-current control method of multi-function electromagnetic transmitter

NASA Astrophysics Data System (ADS)

Xue, Kaichang; Zhou, Fengdao; Wang, Shuang; Lin, Jun

2015-02-01

Based on the requirements of controlled source audio-frequency magnetotelluric, DC resistivity, and induced polarization, a constant-current control method is proposed. Using the required current waveforms in prospecting as a standard, the causes of current waveform distortion and current waveform distortion's effects on prospecting are analyzed. A cascaded topology is adopted to achieve 40 kW constant-current transmitter. The responsive speed and precision are analyzed. According to the power circuit of the transmitting system, the circuit structure of the pulse width modulation (PWM) constant-current controller is designed. After establishing the power circuit model of the transmitting system and the PWM constant-current controller model, analyzing the influence of ripple current, and designing an open-loop transfer function according to the amplitude-frequency characteristic curves, the parameters of the PWM constant-current controller are determined. The open-loop transfer function indicates that the loop gain is no less than 28 dB below 160 Hz, which assures the responsive speed of the transmitting system; the phase margin is 45°, which assures the stabilization of the transmitting system. Experimental results verify that the proposed constant-current control method can keep the control error below 4% and can effectively suppress load change caused by the capacitance of earth load.

Systematic Evaluation Program (SEP) at Rocky Flats Plant: An overview of practical management issues for evaluation of natural phenomena hazards

DOE Office of Scientific and Technical Information (OSTI.GOV)

Badwan, F.M.; Herring, K.S.

1993-08-01

Many of the buildings at the Rocky Flats Plant were designed and built before modern standards were developed, including standards for protection against extreme natural phenomenon such as tornadoes, earthquakes, and floods. The purpose of the SEP is to establish an integrated approach to assessing the design adequacy of specific high and moderate hazard Rocky Flats facilities from a safety perspective and to establish a basis for defining any needed facility improvements. The SEP is to be carried out in three Phases. In Phase 1, topics to be evaluated and an evaluation plan for each topic were developed. Any differencesmore » between Current Design Requirements (CDR) or acceptance criteria and the design of existing facilities, will be identified during Phase 2 and assessed using an integrated systematic approach during Phase 3. The integrated assessment performed during Phase 3 provides a process for evaluating the differences between existing facility design and CDRs so that decisions on corrective actions can be made on the basis of relative risk reduction and cost effectiveness. These efforts will ensure that a balanced and integrated level of safety is achieved for long-term operation of these buildings. Through appropriate selection of topics and identification of the structures, systems, and components to be evaluated, the SEP will address outstanding design issues related to the prevention and mitigation of design basis accidents, including those arising from natural phenomena. The objective of the SEP is not to bring these buildings into strict compliance with current requirements, but rather to ensure that an adequate level of safety is achieved in an economical fashion.« less

The Development of Health-Education Curricula in Elementary Schools

ERIC Educational Resources Information Center

Watson, Linda Eva

2013-01-01

This project study addressed the problem of teachers at a local elementary school site attempting to implement a standards-based health initiative with a minimal amount of instructional strategies designed to support the new curriculum. The purpose of the study was to examine current health instruction by gathering teachers' perceptions and lived…

76 FR 63909 - Draft Programmatic Environmental Impact Statement (EIS) for Modernization of Training...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-14

... the training requirements of military units in Hawai`i. This modernization would improve the quality... at PTA are old, are operating beyond their useful life and do not meet current DoD design standards... with the possible effects to air quality, historic resources, and threatened and endangered species...

Project Target: Criterion-Referenced Physical Fitness Standards for Adolescents with Disabilities. Final Report.

ERIC Educational Resources Information Center

Winnick, Joseph P.; Short, Francis X.

This final report discusses the outcomes of a project designed to extend the nation's current emphasis on health-related, criterion-referenced fitness testing and programming to children and adolescents with disabilities. It summarizes project activities leading up to the Brockport Physical Fitness Test and related measures. Activities included:…

Managing Courses Defining Learning: What Faculty, Students, and Administrators Want

ERIC Educational Resources Information Center

Jafari, Ali; McGee, Patricia; Carmean, Colleen

2006-01-01

The use of Learning/Course Management Systems (L/CMSs) has exploded in higher education. Recently, these authors served as editors for a book, "Course Management Systems for Learning," which explored current L/CMS design and usage by documenting best practices, research, standards, and implementations. Although the final section of the book…

The Evolution of SCORM to Tin Can API: Implications for Instructional Design

ERIC Educational Resources Information Center

Lindert, Lisa; Su, Bude

2016-01-01

Integrating and documenting formal and informal learning experiences is challenging using the current Shareable Content Object Reference Model (SCORM) eLearning standard, which limits the media and data that are obtained from eLearning. In response to SCORM's limitations, corporate, military, and academic institutions have collaborated to develop…

Randomized Trial of Behavioral Activation, Cognitive Therapy, and Antidepressant Medication in the Acute Treatment of Adults with Major Depression

ERIC Educational Resources Information Center

Dimidjian, Sona; Hollon, Steven D.; Dobson, Keith S.; Schmaling, Karen B.; Kohlenberg, Robert J.; Addis, Michael E.; Gallop, Robert; McGlinchey, Joseph B.; Markley, David K.; Gollan, Jackie K.; Atkins, David C.; Dunner, David L.; Jacobson, Neil S.

2006-01-01

Antidepressant medication is considered the current standard for severe depression, and cognitive therapy is the most widely investigated psychosocial treatment for depression. However, not all patients want to take medication, and cognitive therapy has not demonstrated consistent efficacy across trials. Moreover, dismantling designs have…

A Probablistic Diagram to Guide Chemical Design with Reduced Potency to Incur Cytotoxicity

EPA Science Inventory

Toxicity is a concern with many chemicals currently in commerce, and with new chemicals that are introduced each year. The standard approach to testing chemicals is to run studies in laboratory animals (e.g. rats, mice, dogs), but because of the expense of these studies and conce...

(PRESENTED IN ALBERTA, CANADA) A PERFORMANCE EVALUATION OF THE 2004 RELEASE OF MODELS-3 CMAQ

EPA Science Inventory

The Clean Air Act and its Amendments require that the U.S. Environmental Protection Agency (EPA) establish National Ambient Air Quality Standards for O₃ and particulate matter and to assess current and future air quality regulations designed to protect human health and...

Multi-Criteria Decision Analysis of Test Endpoints for Detecting the Effects of Endocrine Active Substances in Fish Full Life Cycle Tests

EPA Science Inventory

Fish full life cycle (FFLC) tests are increasingly required in the ecotoxicological assessment of endocrine active substances. However, FFLC tests have not been internationally standardized or validated, and it is currently unclear how such tests should best be designed to provid...

Patterns in Authoring of Adaptive Educational Hypermedia: A Taxonomy of Learning Styles

ERIC Educational Resources Information Center

Brown, Elizabeth; Cristea, Alexandra; Stewart, Craig; Brailsford, Tim

2005-01-01

This paper describes the use of adaptation patterns in the task of formulating standards for adaptive educational hypermedia (AEH) systems that is currently under investigation by the EU ADAPT project. Within this project, design dimensions for high granularity patterns have been established. In this paper we focus on detailing lower granularity…

Investigating Teachers' Beliefs about the Utility of Epistemic Practices: A Pilot Study of a New Assessment

ERIC Educational Resources Information Center

Hennessey, Maeghan N.; Murphy, P. Karen; Kulikowich, Jonna M.

2013-01-01

Much current research has focused on epistemic beliefs of students. However, teachers' epistemic practices are also important to study because they may influence students' epistemic beliefs. The standards for justification for different content areas necessitate that teachers use diverse pedagogical practices designed to help students develop…

High School Physics: An Interactive Instructional Approach That Meets the Next Generation Science Standards

ERIC Educational Resources Information Center

Huang, Shaobo; Mejia, Joel Alejandro; Becker, Kurt; Neilson, Drew

2015-01-01

Improving high school physics teaching and learning is important to the long-term success of science, technology, engineering, and mathematics (STEM) education. Efforts are currently in place to develop an understanding of science among high school students through formal and informal educational experiences in engineering design activities…

Science Curriculum Resource Handbook: A Practical Guide for K-12 Science Curriculum.

ERIC Educational Resources Information Center

Cheek, Dennis W., Ed.; And Others

This handbook is one of a series of practical references for curriculum developers, education faculty, veteran teachers, and student teachers. The handbook is designed to provide basic information on the background of the science curriculum, and current information on publications, standards, and special materials for K-12 science. Part 1 contains…

Grouted pile to sleeves connections: Design provisions for the new ISO Standard for offshore structures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harwood, R.G.; Billington, C.J.; Buitrago, J.

1996-12-01

A Technical Core Group (TCG) was set up in March 1994 to review the design practice provisions for grouted pile to sleeve connections, mechanical connections and repairs as part of the international harmonization process for the new ISO Standard, ISO 13819-2, Petroleum and Natural Gas Industries--Offshore Structures, Part 2: Fixed Steel Structures. This paper provides an overview of the development of the proposed new design provisions for grouted connections including, the gathering and screening of the data, the evolution of the design formulae, and the evaluation of the resistance factor. Detailed comparisons of the new formulae with current design practicemore » (API, HSE and DnV) are also included. In the development of the new provisions the TCG has been given access to the largest database ever assembled on this topic. This database includes all the major testing programs performed over the last 20 years, and recent UK and Norwegian research projects not previously reported. The limitations in the database are discussed and the areas where future research would be of benefit are highlighted.« less

A Test Methodology for Determining Space-Readiness of Xilinx SRAM-Based FPGA Designs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Quinn, Heather M; Graham, Paul S; Morgan, Keith S

2008-01-01

Using reconfigurable, static random-access memory (SRAM) based field-programmable gate arrays (FPGAs) for space-based computation has been an exciting area of research for the past decade. Since both the circuit and the circuit's state is stored in radiation-tolerant memory, both could be alterd by the harsh space radiation environment. Both the circuit and the circuit's state can be prote cted by triple-moduler redundancy (TMR), but applying TMR to FPGA user designs is often an error-prone process. Faulty application of TMR could cause the FPGA user circuit to output incorrect data. This paper will describe a three-tiered methodology for testing FPGA usermore » designs for space-readiness. We will describe the standard approach to testing FPGA user designs using a particle accelerator, as well as two methods using fault injection and a modeling tool. While accelerator testing is the current 'gold standard' for pre-launch testing, we believe the use of fault injection and modeling tools allows for easy, cheap and uniform access for discovering errors early in the design process.« less

Evaluation of Compliance to National Nutrition Policies in Summer Day Camps

PubMed Central

Tilley, Falon; W.Beets, Michael; Jones, Sonya; Turner-McGrievy, Gabrielle

2015-01-01

Objective The National Afterschool Association (NAA) standards specify the role of summer day camps (SDCs) in promoting healthy nutrition habits of children attending, identifying foods and beverages to be provided to children, and staff roles in promoting good nutrition habits; however, many SDCs to not provide meals. Currently, national guidelines specifying what children are allowed to bring to such settings does not exist, nor is there a solid understanding of the current landscape surrounding healthy eating within SDCs. Design A cross-sectional study design using validated measures with multiple observations was used to determine the types of foods and beverage brought to SDC programs. Setting Four large-scale, community-based SDCs participated in the study during summer 2011. Subjects The types of foods and beverages brought by children (N=766) and staff (N=87) as well as any instances of staff promoting healthy eating behaviors were examined via direct observation over 27 days. Additionally, the extent to which current foods and beverages at SDCs complied with NAA standards was evaluated. Results Less than half of the children brought water, 47% brought non-100% juices, 4% brought soda, 4% brought a vegetable, and 20% brought fruit. Staff foods/beverages modeled similar patterns. Promotion of healthy eating by staff was observed <1% of the time. Conclusions Findings suggest that foods and beverages brought to SDC by children and staff do support nutrition standards and staff do not regularly promote healthy eating habits. To assist, professional development, parent education, and organizational policies are needed. PMID:24909716

Energy Storage System Safety: Plan Review and Inspection Checklist

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cole, Pam C.; Conover, David R.

Codes, standards, and regulations (CSR) governing the design, construction, installation, commissioning, and operation of the built environment are intended to protect the public health, safety, and welfare. While these documents change over time to address new technology and new safety challenges, there is generally some lag time between the introduction of a technology into the market and the time it is specifically covered in model codes and standards developed in the voluntary sector. After their development, there is also a timeframe of at least a year or two until the codes and standards are adopted. Until existing model codes andmore » standards are updated or new ones are developed and then adopted, one seeking to deploy energy storage technologies or needing to verify the safety of an installation may be challenged in trying to apply currently implemented CSRs to an energy storage system (ESS). The Energy Storage System Guide for Compliance with Safety Codes and Standards1 (CG), developed in June 2016, is intended to help address the acceptability of the design and construction of stationary ESSs, their component parts, and the siting, installation, commissioning, operations, maintenance, and repair/renovation of ESS within the built environment.« less

Theoretical considerations and measurements for phoropters

NASA Astrophysics Data System (ADS)

Zhang, Jiyan; Liu, Wenli; Sun, Jie

2008-10-01

A phoropter is one of the most popular ophthalmic instruments used in current optometry practice. The quality and verification of the instrument are of the utmost importance. In 1997, International Organization for Standardization published the first ISO standard for requirements of phoropters. However, in China, few standard and test method are suggested for phoropters. Research work on test method for phoropters was carried out early in 2004 by China National Institute of Metrology. In this paper, first, structure of phoropters is described. Then, theoretical considerations for its optical design are analyzed. Next, a newly developed instrument is introduced and measurements are taken. By calibration, the indication error of the instrument is not over 0.05m-1. Finally, measurement results show that the quality situation of phoropters is not as good as expected because of production and assembly error. Optical design shall be improved especially for combinations of both spherical and cylindrical lenses with higher power. Besides, optical requirements specified in ISO standard are found to be a little strict and hard to meet. A proposal for revision of this international standard is drafted and discussed on ISO meeting of 2007 held in Tokyo.

Achieving sink node anonymity in tactical wireless sensor networks using a reactive routing protocol

DTIC Science & Technology

2017-06-01

transmit their information through the network based on the specific protocols that are implemented. Nodes may be designed to perform any combination of...band, and one channel in the 868-MHz band. The IEEE 802.15.4 standard is designed to provide Low-Rate Wireless Personal Area Network (LR-WPAN...MANETs and is currently a draft at the IETF Network Working Group [9]. It was derived from the Ad hoc On -Demand Distance Vector (AODV) routing

Design and implementation of an inexpensive target scanner for the growth of thin films by the laser-ablation process

NASA Astrophysics Data System (ADS)

Rao, A. M.; Moodera, J. S.

1991-04-01

The design of a target scanner that is inexpensive and easy to construct is described. Our target scanner system does not require an expensive personal computer to raster the laser beam uniformily over the target material, unlike the computer driven target scanners that are currently being used in the thin-film industry. The main components of our target scanner comprise a bidirectional motor, a two-position switch, and a standard optical mirror mount.

Integrating aerodynamic surface modeling for computational fluid dynamics with computer aided structural analysis, design, and manufacturing

NASA Technical Reports Server (NTRS)

Thorp, Scott A.

1992-01-01

This presentation will discuss the development of a NASA Geometry Exchange Specification for transferring aerodynamic surface geometry between LeRC systems and grid generation software used for computational fluid dynamics research. The proposed specification is based on a subset of the Initial Graphics Exchange Specification (IGES). The presentation will include discussion of how the NASA-IGES standard will accommodate improved computer aided design inspection methods and reverse engineering techniques currently being developed. The presentation is in viewgraph format.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Desroches, Louis-Benoit; Garbesi, Karina

It is well established that energy efficiency is most often the lowest cost approach to reducing national energy use and minimizing carbon emissions. National investments in energy efficiency to date have been highly cost-effective. The cumulative impacts (out to 2050) of residential energy efficiency standards are expected to have a benefit-to-cost ratio of 2.71:1. This project examined energy end-uses in the residential, commercial, and in some cases the industrial sectors. The scope is limited to appliances and equipment, and does not include building materials, building envelopes, and system designs. This scope is consistent with the scope of DOE's appliance standardsmore » program, although many products considered here are not currently subject to energy efficiency standards. How much energy could the United States save if the most efficient design options currently feasible were adopted universally? What design features could produce those savings? How would the savings from various technologies compare? With an eye toward identifying promising candidates and strategies for potential energy efficiency standards, the Max Tech and Beyond project aims to answer these questions. The analysis attempts to consolidate, in one document, the energy savings potential and design characteristics of best-on-market products, best-engineered products (i.e., hypothetical products produced using best-on-market components and technologies), and emerging technologies in research & development. As defined here, emerging technologies are fundamentally new and are as yet unproven in the market, although laboratory studies and/or emerging niche applications offer persuasive evidence of major energy-savings potential. The term 'max tech' is used to describe both best-engineered and emerging technologies (whichever appears to offer larger savings). Few best-on-market products currently qualify as max tech, since few apply all available best practices and components. The three primary analyses presented in this report are: Nevertheless, it is important to analyze best-on-market products, since data on truly max tech technologies are limited. (1) an analysis of the cross-cutting strategies most promising for reducing appliance and equipment energy use in the U.S.; (2) a macro-analysis of the U.S. energy-saving potential inherent in promising ultra-efficient appliance technologies; and (3) a product-level analysis of the energy-saving potential.« less

Geopolymer concrete for structural use: Recent findings and limitations

NASA Astrophysics Data System (ADS)

Nuruddin, M. F.; Malkawi, A. B.; Fauzi, A.; Mohammed, B. S.; Almattarneh, H. M.

2016-06-01

Geopolymer binders offer a possible solution for several problems that facing the current cement industry. These binders exhibit similar or better engineering properties compared to cement and can utilize several types of waste materials. This paper presents the recent research progress regarding the structural behaviour of reinforced geopolymer concrete members including beams, columns and slabs. The reported results showed that the structural behaviour of the reinforced geopolymer concrete members is similar to the known behaviour of the ordinary reinforced concrete members. In addition, the currently available standards have been conservatively used for analysis and designing of reinforced geopolymer concrete structures. On the other hand, the main hurdles facing the spread of geopolymer concrete was the absence of standards and the concerns about the long-term properties. Other issues included the safety, cost and liability.

A Study to Determine the Need for a Standard Limiting the Horsepower of Recreational Boats.

DTIC Science & Technology

1978-09-01

Acceptance Number of Number Fatal Accidents Non -Fatal Accidents - (Lost control ) 1 93 2 :No attempt to avoid collision) 1 19 72 fAttempted to avoic, not enough...base, and an explanation of the computer SModel designed to aid in organizing and analyzing the data are presented with the results of the analyses. An...Standard 75 S 3.2 Non -Powering Related Accident Sample 76 3.3 Coded Information and Coding Form 77 • - 3.4 Effectiveness Evaluation of the Current

Imam Sahib Border Police Company Headquarters in Kunduz Province: $7.3 Million Facility Sits Largely Unused

DTIC Science & Technology

2013-01-01

Afghanistan Border Police Battalion (BN) Headquarters (HQ) to replace an existing sub-standard fac ility. The standard ABP BN HQ manning documents call for...current manning of the site revealed that an ABP BN HQ unit is now utilizing this as a headquarters. An ABP BN HQ has a tashkil manning of 59 personnel...The facility was built for 175 personnel. The difference in designs between an ABP battalion and a company is the amount of barrack space. The build

A Clinician-Centered Evaluation of the Usability of AHLTA and Automated Clinical Practice Guidelines at TAMC

DTIC Science & Technology

2011-03-31

evidence based medicine into clinical practice. It will decrease costs and enable multiple stakeholders to work in an open content/source environment to exchange clinical content, develop and test technology and explore processes in applied CDS. Design: Comparative study between the KMR infrastructure and capabilities developed as an open source, vendor agnostic solution for aCPG execution within AHLTA and the current DoD/MHS standard evaluating: H1: An open source, open standard KMR and Clinical Decision Support Engine can enable organizations to share domain

Diversity of assessing circulating tumor cells (CTCs) emphasizes need for standardization: a CTC Guide to design and report trials.

PubMed

Bünger, S; Zimmermann, M; Habermann, J K

2015-09-01

Hematogenous spreading of tumor cells from primary tumors is a crucial step in the cascade to metastasis, the latter being the most limiting factor for patients' survival prognosis. Therefore, circulating tumor cells (CTCs) have become a field of intensive research. However, the process of isolation and identification of CTCs lacks standardization. This article presents an overview of 71 CTC studies reported in PUBMED since 2000 and focusing on colorectal cancer. These studies are evaluated regarding standardization of CTC isolation and identification, marker proteins used, study population and blood sample quality management, clinical performance, and quality measures. Overall, standardization of CTC assessment seems insufficient. Thus, comparability of CTC studies is hampered and results should be interpreted carefully. We here propose a standardized CTC guideline (CTC Guide) to prospectively design and report studies/trials in a harmonized form. Despite the current interstudy heterogeneity, the data indicate that CTC detection is of clinical relevance and CTCs should be considered as a surrogate prognostic marker. Many studies indicate the high potential for CTCs as prognostic markers, e.g., in colorectal cancer treatment. However, standardized, large-scale multicenter validation studies are still needed to pave the way for clinical implementation of CTC detection that could ameliorate individualized medicine regimes.

Stemless shoulder arthroplasty: current status.

PubMed

Churchill, R Sean

2014-09-01

Since the original Neer humeral replacement in the 1950s, the standard primary anatomic total shoulder arthroplasty design has slowly evolved. Most recently, the humeral stem has become progressively shorter to help combat stem-related complications. Currently, there are several companies who have developed and marketed a stemless humeral arthroplasty component. Manufacturers' data for 5 stemless shoulder arthroplasty components currently on the market were analyzed and reviewed. A literature review of short-term results for stemless shoulder arthroplasty was completed. Of the stemless shoulder arthroplasty systems available on the market, 3 are currently undergoing clinical trials in the United States. The Tornier Simpliciti (Tornier, Edina, MN, USA) clinical trial began in 2011. The study with 2-year minimum follow-up results is scheduled for completion in November 2014. The Arthrex Eclipse (Arthrex, Naples, FL, USA) clinical trial was started in January 2013. The tentative study completion date is 2017. The Biomet Nano (Biomet, Warsaw, IN, USA) clinical trial began in October 2013 and also has a tentative completion date of 2017. No other clinical trial is currently under way in the United States. Early results for stemless shoulder arthroplasty indicate clinical results similar to standard stemmed shoulder arthroplasty. Radiographic analysis indicates implant stability without migration or subsidence at 2- to 3-year minimum follow-up.. Several stemless shoulder arthroplasty implants are available outside the United States. Early clinical and radiographic results are promising, but well-designed clinical studies and midterm results are lacking. Three clinical trials are currently under way in the United States with initial availability for use anticipated in 2015. Copyright © 2014 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Mosby, Inc. All rights reserved.

Considerations of Unmanned Aircraft Classification for Civil Airworthiness Standards

NASA Technical Reports Server (NTRS)

Maddalon, Jeffrey M.; Hayhurst, Kelly J.; Morris, A. Terry; Verstynen, Harry A.

2013-01-01

The use of unmanned aircraft in the National Airspace System (NAS) has been characterized as the next great step forward in the evolution of civil aviation. Although use of unmanned aircraft systems (UAS) in military and public service operations is proliferating, civil use of UAS remains limited in the United States today. This report focuses on one particular regulatory challenge: classifying UAS to assign airworthiness standards. Classification is useful for ensuring that meaningful differences in design are accommodated by certification to different standards, and that aircraft with similar risk profiles are held to similar standards. This paper provides observations related to how the current regulations for classifying manned aircraft, based on dimensions of aircraft class and operational aircraft categories, could apply to UAS. This report finds that existing aircraft classes are well aligned with the types of UAS that currently exist; however, the operational categories are more difficult to align to proposed UAS use in the NAS. Specifically, the factors used to group manned aircraft into similar risk profiles do not necessarily capture all relevant UAS risks. UAS classification is investigated through gathering approaches to classification from a broad spectrum of organizations, and then identifying and evaluating the classification factors from these approaches. This initial investigation concludes that factors in addition to those currently used today to group manned aircraft for the purpose of assigning airworthiness standards will be needed to adequately capture risks associated with UAS and their operations.

Development of high impedance measurement system for water leakage detection in implantable neuroprosthetic devices.

PubMed

Yousif, Aziz; Kelly, Shawn K

2016-08-01

There has been a push for a greater number of channels in implantable neuroprosthetic devices; but, that number has largely been limited by current hermetic packaging technology. Microfabricated packaging is becoming reality, but a standard testing system is needed to prepare these devices for clinical trials. Impedance measurements of electrodes built into the packaging layers may give an early warning of device failure and predict device lifetime. Because the impedance magnitudes of such devices can be on the order of gigaohms, a versatile system was designed to accommodate ultra-high impedances and allow future integrated circuit implementation in current neural prosthetic technologies. Here we present the circuitry, control software, and preliminary testing results of our designed system.

Energy monitoring and managing for electromobility purposes

NASA Astrophysics Data System (ADS)

Slanina, Zdenek; Docekal, Tomas

2016-09-01

This paper describes smart energy meter design and implementation focused on using in charging stations (stands) for electric vehicle (follows as EV) charging support and possible embedding into current smart building technology. In this article there are included results of research of commercial devices available in Czech republic for energy measuring for buildings as well as analysis of energy meter for given purposes. For example in described module there was required measurement of voltage, electric current and frequency of power network. Finally there was designed a communication module with common interface to energy meter for standard communication support between charging station and electric car. After integration into smart buildings (home automation, parking houses) there are pros and cons of such solution mentioned1,2.

GPS antenna designs

NASA Technical Reports Server (NTRS)

Laube, Samuel J. P.

1987-01-01

Application of the current GPS NAVSTAR system to civilian service requires that a right hand, circularly polarized, -160 dBW spread spectrum signal be received from an orbiting satellite, where the antenna environment is also moving. This presents a design challenge when inexpensive antennas are desired. The intent of this survey is to provide information on the antennas mentioned and to construct and test prototypes to determine whether the choice made by the industry, the quadrifilar helix, is the best. The helix antenna is currently the low cost standard for GPS. Prototype versions were constructed using 12 gauge wire and subminiature coaxial hardline. The constructed antennas were tested using a signal generator and a reference turnstile. A spectrum analyzer was used to measure the level of the received signal.

Burst strength of tubing and casing based on twin shear unified strength theory.

PubMed

Lin, Yuanhua; Deng, Kuanhai; Sun, Yongxing; Zeng, Dezhi; Liu, Wanying; Kong, Xiangwei; Singh, Ambrish

2014-01-01

The internal pressure strength of tubing and casing often cannot satisfy the design requirements in high pressure, high temperature and high H2S gas wells. Also, the practical safety coefficient of some wells is lower than the design standard according to the current API 5C3 standard, which brings some perplexity to the design. The ISO 10400: 2007 provides the model which can calculate the burst strength of tubing and casing better than API 5C3 standard, but the calculation accuracy is not desirable because about 50 percent predictive values are remarkably higher than real burst values. So, for the sake of improving strength design of tubing and casing, this paper deduces the plastic limit pressure of tubing and casing under internal pressure by applying the twin shear unified strength theory. According to the research of the influence rule of yield-to-tensile strength ratio and mechanical properties on the burst strength of tubing and casing, the more precise calculation model of tubing-casing's burst strength has been established with material hardening and intermediate principal stress. Numerical and experimental comparisons show that the new burst strength model is much closer to the real burst values than that of other models. The research results provide an important reference to optimize the tubing and casing design of deep and ultra-deep wells.

Burst Strength of Tubing and Casing Based on Twin Shear Unified Strength Theory

PubMed Central

Lin, Yuanhua; Deng, Kuanhai; Sun, Yongxing; Zeng, Dezhi; Liu, Wanying; Kong, Xiangwei; Singh, Ambrish

2014-01-01

The internal pressure strength of tubing and casing often cannot satisfy the design requirements in high pressure, high temperature and high H2S gas wells. Also, the practical safety coefficient of some wells is lower than the design standard according to the current API 5C3 standard, which brings some perplexity to the design. The ISO 10400: 2007 provides the model which can calculate the burst strength of tubing and casing better than API 5C3 standard, but the calculation accuracy is not desirable because about 50 percent predictive values are remarkably higher than real burst values. So, for the sake of improving strength design of tubing and casing, this paper deduces the plastic limit pressure of tubing and casing under internal pressure by applying the twin shear unified strength theory. According to the research of the influence rule of yield-to-tensile strength ratio and mechanical properties on the burst strength of tubing and casing, the more precise calculation model of tubing-casing's burst strength has been established with material hardening and intermediate principal stress. Numerical and experimental comparisons show that the new burst strength model is much closer to the real burst values than that of other models. The research results provide an important reference to optimize the tubing and casing design of deep and ultra-deep wells. PMID:25397886

Shiny FHIR: An Integrated Framework Leveraging Shiny R and HL7 FHIR to Empower Standards-Based Clinical Data Applications.

PubMed

Hong, Na; Prodduturi, Naresh; Wang, Chen; Jiang, Guoqian

2017-01-01

In this study, we describe our efforts in building a clinical statistics and analysis application platform using an emerging clinical data standard, HL7 FHIR, and an open source web application framework, Shiny. We designed two primary workflows that integrate a series of R packages to enable both patient-centered and cohort-based interactive analyses. We leveraged Shiny with R to develop interactive interfaces on FHIR-based data and used ovarian cancer study datasets as a use case to implement a prototype. Specifically, we implemented patient index, patient-centered data report and analysis, and cohort analysis. The evaluation of our study was performed by testing the adaptability of the framework on two public FHIR servers. We identify common research requirements and current outstanding issues, and discuss future enhancement work of the current studies. Overall, our study demonstrated that it is feasible to use Shiny for implementing interactive analysis on FHIR-based standardized clinical data.

Transportable GPU (General Processor Units) chip set technology for standard computer architectures

NASA Astrophysics Data System (ADS)

Fosdick, R. E.; Denison, H. C.

1982-11-01

The USAFR-developed GPU Chip Set has been utilized by Tracor to implement both USAF and Navy Standard 16-Bit Airborne Computer Architectures. Both configurations are currently being delivered into DOD full-scale development programs. Leadless Hermetic Chip Carrier packaging has facilitated implementation of both architectures on single 41/2 x 5 substrates. The CMOS and CMOS/SOS implementations of the GPU Chip Set have allowed both CPU implementations to use less than 3 watts of power each. Recent efforts by Tracor for USAF have included the definition of a next-generation GPU Chip Set that will retain the application-proven architecture of the current chip set while offering the added cost advantages of transportability across ISO-CMOS and CMOS/SOS processes and across numerous semiconductor manufacturers using a newly-defined set of common design rules. The Enhanced GPU Chip Set will increase speed by an approximate factor of 3 while significantly reducing chip counts and costs of standard CPU implementations.

Research and Development of Natural Draft Ultra-Low Emissions Burners for Gas Appliances

DOE Office of Scientific and Technical Information (OSTI.GOV)

Therkelsen, Peter; Cheng, Robert; Sholes, Darren

Combustion systems used in residential and commercial cooking appliances must be robust and easy to use while meeting air quality standards. Current air quality standards for cooking appliances are far greater than other stationary combustion equipment. By developing an advanced low emission combustion system for cooking appliances, the air quality impacts from these devices can be reduced. This project adapted the Lawrence Berkeley National Laboratory (LBNL) Ring-Stabilizer Burner combustion technology for residential and commercial natural gas fired cooking appliances (such as ovens, ranges, and cooktops). LBNL originally developed the Ring-Stabilizer Burner for a NASA funded microgravity experiment. This natural draftmore » combustion technology reduces NOx emissions significantly below current SCAQMD emissions standards without post combustion treatment. Additionally, the Ring-Stabilizer Burner technology does not require the assistance of a blower to achieve an ultra-low emission lean premix flame. The research team evaluated the Ring-Stabilizer Burner and fabricated the most promising designs based on their emissions and turndown.« less

"Plain packaging" regulations for tobacco products: the impact of standardizing the color and design of cigarette packs.

PubMed

Hammond, David

2010-01-01

Tobacco packaging and labeling policies have emerged as prominent and cost-effective tobacco control measures. Although packaging policies have primarily focused on health warnings, there is growing recognition of the importance of packaging as a marketing tool for the tobacco industry. The current paper reviews evidence on the potential impact of standardizing the color and design of tobacco packages -so called "plain" packaging. The evidence indicates three primary benefits of plain packaging: increasing the effectiveness of health warnings, reducing false health beliefs about cigarettes, and reducing brand appeal especially among youth and young adults. Overall, the research to date suggests that "plain" packaging regulations would be an effective tobacco control measure, particularly in jurisdictions with comprehensive restrictions on other forms of marketing.

GAMBIT: the global and modular beyond-the-standard-model inference tool

NASA Astrophysics Data System (ADS)

Athron, Peter; Balazs, Csaba; Bringmann, Torsten; Buckley, Andy; Chrząszcz, Marcin; Conrad, Jan; Cornell, Jonathan M.; Dal, Lars A.; Dickinson, Hugh; Edsjö, Joakim; Farmer, Ben; Gonzalo, Tomás E.; Jackson, Paul; Krislock, Abram; Kvellestad, Anders; Lundberg, Johan; McKay, James; Mahmoudi, Farvah; Martinez, Gregory D.; Putze, Antje; Raklev, Are; Ripken, Joachim; Rogan, Christopher; Saavedra, Aldo; Savage, Christopher; Scott, Pat; Seo, Seon-Hee; Serra, Nicola; Weniger, Christoph; White, Martin; Wild, Sebastian

2017-11-01

We describe the open-source global fitting package GAMBIT: the Global And Modular Beyond-the-Standard-Model Inference Tool. GAMBIT combines extensive calculations of observables and likelihoods in particle and astroparticle physics with a hierarchical model database, advanced tools for automatically building analyses of essentially any model, a flexible and powerful system for interfacing to external codes, a suite of different statistical methods and parameter scanning algorithms, and a host of other utilities designed to make scans faster, safer and more easily-extendible than in the past. Here we give a detailed description of the framework, its design and motivation, and the current models and other specific components presently implemented in GAMBIT. Accompanying papers deal with individual modules and present first GAMBIT results. GAMBIT can be downloaded from gambit.hepforge.org.

Mobius Assembly: A versatile Golden-Gate framework towards universal DNA assembly.

PubMed

Andreou, Andreas I; Nakayama, Naomi

2018-01-01

Synthetic biology builds upon the foundation of engineering principles, prompting innovation and improvement in biotechnology via a design-build-test-learn cycle. A community-wide standard in DNA assembly would enable bio-molecular engineering at the levels of predictivity and universality in design and construction that are comparable to other engineering fields. Golden Gate Assembly technology, with its robust capability to unidirectionally assemble numerous DNA fragments in a one-tube reaction, has the potential to deliver a universal standard framework for DNA assembly. While current Golden Gate Assembly frameworks (e.g. MoClo and Golden Braid) render either high cloning capacity or vector toolkit simplicity, the technology can be made more versatile-simple, streamlined, and cost/labor-efficient, without compromising capacity. Here we report the development of a new Golden Gate Assembly framework named Mobius Assembly, which combines vector toolkit simplicity with high cloning capacity. It is based on a two-level, hierarchical approach and utilizes a low-frequency cutter to reduce domestication requirements. Mobius Assembly embraces the standard overhang designs designated by MoClo, Golden Braid, and Phytobricks and is largely compatible with already available Golden Gate part libraries. In addition, dropout cassettes encoding chromogenic proteins were implemented for cost-free visible cloning screening that color-code different cloning levels. As proofs of concept, we have successfully assembled up to 16 transcriptional units of various pigmentation genes in both operon and multigene arrangements. Taken together, Mobius Assembly delivers enhanced versatility and efficiency in DNA assembly, facilitating improved standardization and automation.

Human factors engineering verification and validation for APR1400 computerized control room

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shin, Y. C.; Moon, H. K.; Kim, J. H.

2006-07-01

This paper introduces the Advanced Power Reactor 1400 (APR1400) HFE V and V activities the Korea Hydro Nuclear Plant Co. LTD. (KHNP) has performed for the last 10 years and some of the lessons learned through these activities. The features of APR1400 main control room include large display panel, redundant compact workstations, computer-based procedure, and safety console. Several iterations of human factors evaluations have been performed from small scale proof of concept tests to large scale integrated system tests for identifying human engineering deficiencies in the human system interface design. Evaluations in the proof of concept test were focused onmore » checking the presence of any show stopper problems in the design concept. Later evaluations were mostly for finding design problems and for assuring the resolution of human factors issues of advanced control room. The results of design evaluations were useful not only for refining the control room design, but also for licensing the standard design. Several versions of APR1400 mock-ups with dynamic simulation models of currently operating Korea Standard Nuclear Plant (KSNP) have been used for the evaluations with the participation of operators from KSNP plants. (authors)« less

Coil geometry effects on scanning single-coil magnetic induction tomography

NASA Astrophysics Data System (ADS)

Feldkamp, Joe R.; Quirk, Stephen

2017-09-01

Alternative coil designs for single coil magnetic induction tomography are considered in this work, with the intention of improving upon the standard design used previously. In particular, we note that the blind spot associated with this coil type, a portion of space along its axis where eddy current generation can be very weak, has an important effect on performance. The seven designs tested here vary considerably in the size of their blind spot. To provide the most discerning test possible, we use laboratory phantoms containing feature dimensions similar to blind spot size. Furthermore, conductivity contrasts are set higher than what would occur naturally in biological systems, which has the effect of weakening eddy current generation at coil locations that straddle the border between high and low conductivity features. Image reconstruction results for the various coils show that coils with smaller blind spots give markedly better performance, though improvements in signal-to-noise ratio could alter that conclusion.

Mode-dependent templates and scan order for H.264/AVC-based intra lossless coding.

PubMed

Gu, Zhouye; Lin, Weisi; Lee, Bu-Sung; Lau, Chiew Tong; Sun, Ming-Ting

2012-09-01

In H.264/advanced video coding (AVC), lossless coding and lossy coding share the same entropy coding module. However, the entropy coders in the H.264/AVC standard were original designed for lossy video coding and do not yield adequate performance for lossless video coding. In this paper, we analyze the problem with the current lossless coding scheme and propose a mode-dependent template (MD-template) based method for intra lossless coding. By exploring the statistical redundancy of the prediction residual in the H.264/AVC intra prediction modes, more zero coefficients are generated. By designing a new scan order for each MD-template, the scanned coefficients sequence fits the H.264/AVC entropy coders better. A fast implementation algorithm is also designed. With little computation increase, experimental results confirm that the proposed fast algorithm achieves about 7.2% bit saving compared with the current H.264/AVC fidelity range extensions high profile.

Single shot trajectory design for region-specific imaging using linear and nonlinear magnetic encoding fields.

PubMed

Layton, Kelvin J; Gallichan, Daniel; Testud, Frederik; Cocosco, Chris A; Welz, Anna M; Barmet, Christoph; Pruessmann, Klaas P; Hennig, Jürgen; Zaitsev, Maxim

2013-09-01

It has recently been demonstrated that nonlinear encoding fields result in a spatially varying resolution. This work develops an automated procedure to design single-shot trajectories that create a local resolution improvement in a region of interest. The technique is based on the design of optimized local k-space trajectories and can be applied to arbitrary hardware configurations that employ any number of linear and nonlinear encoding fields. The trajectories designed in this work are tested with the currently available hardware setup consisting of three standard linear gradients and two quadrupolar encoding fields generated from a custom-built gradient insert. A field camera is used to measure the actual encoding trajectories up to third-order terms, enabling accurate reconstructions of these demanding single-shot trajectories, although the eddy current and concomitant field terms of the gradient insert have not been completely characterized. The local resolution improvement is demonstrated in phantom and in vivo experiments. Copyright © 2012 Wiley Periodicals, Inc.

Design of parallel transmission radiofrequency pulses robust against respiration in cardiac MRI at 7 Tesla.

PubMed

Schmitter, Sebastian; Wu, Xiaoping; Uğurbil, Kâmil; Van de Moortele, Pierre-François

2015-11-01

Two-spoke parallel transmission (pTX) radiofrequency (RF) pulses have been demonstrated in cardiac MRI at 7T. However, current pulse designs rely on a single set of B1(+)/B0 maps that may not be valid for subsequent scans acquired at another phase of the respiration cycle because of organ displacement. Such mismatches may yield severe excitation profile degradation. B1(+)/B0 maps were obtained, using 16 transmit channels at 7T, at three breath-hold positions: exhale, half-inhale, and inhale. Standard and robust RF pulses were designed using maps obtained at exhale only, and at multiple respiratory positions, respectively. Excitation patterns were analyzed for all positions using Bloch simulations. Flip-angle homogeneity was compared in vivo in cardiac CINE acquisitions. Standard one- and two-spoke pTX RF pulses are sensitive to breath-hold position, primarily due to B1(+) alterations, with high dependency on excitation trajectory for two spokes. In vivo excitation inhomogeneity varied from nRMSE = 8.2% (exhale) up to 32.5% (inhale) with the standard design; much more stable results were obtained with the robust design with nRMSE = 9.1% (exhale) and 10.6% (inhale). A new pTX RF pulse design robust against respiration induced variations of B1(+)/B0 maps is demonstrated and is expected to have a positive impact on cardiac MRI in breath-hold, free-breathing, and real-time acquisitions. © 2014 Wiley Periodicals, Inc.

TU-G-213-00: The International Electrotechnical Commission (IEC): What Is It and Why Should Medical Physicists Care?

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

The International Electrotechnical Commission (IEC) writes standards that manufacturers of electrical equipment must comply with. Medical electrical equipment, such as medical imaging, radiation therapy, and radiation dosimetry devices, fall under Technical Committee 62. Of particular interest to medical physicists are the standards developed within Subcommittees (SC) 62B, which addresses diagnostic radiological imaging equipment, and 62C, which addresses equipment for radiation therapy, nuclear medicine and dosimetry. For example, a Working Group of SC 62B is responsible for safety and quality assurance standards for CT scanners and a Working Group of SC 62C is responsible for standards that set requirements for dosimetricmore » safety and accuracy of linacs and proton accelerators. IEC standards thus have an impact on every aspect of a medical physicist’s job, including equipment testing, shielding design, room layout, and workflow. Consequently, it is imperative that US medical physicists know about existing standards, as well as have input on those under development or undergoing revision. The structure of the IEC and current standards development work will be described in detail. The presentation will explain how US medical physicists can learn about IEC standards and contribute to their development. Learning Objectives: Learn about the structure of the IEC and the influence that IEC standards have on the design of equipment for radiology and radiation therapy. Learn about the mechanisms by which the US participates in the development and revision of standards. Understand the specific requirements of several standards having direct relevance to diagnostic and radiation therapy physicists.« less

TU-G-213-01: IEC and US Committee Activities and Organizational Structure

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ibbott, G.

2015-06-15

The International Electrotechnical Commission (IEC) writes standards that manufacturers of electrical equipment must comply with. Medical electrical equipment, such as medical imaging, radiation therapy, and radiation dosimetry devices, fall under Technical Committee 62. Of particular interest to medical physicists are the standards developed within Subcommittees (SC) 62B, which addresses diagnostic radiological imaging equipment, and 62C, which addresses equipment for radiation therapy, nuclear medicine and dosimetry. For example, a Working Group of SC 62B is responsible for safety and quality assurance standards for CT scanners and a Working Group of SC 62C is responsible for standards that set requirements for dosimetricmore » safety and accuracy of linacs and proton accelerators. IEC standards thus have an impact on every aspect of a medical physicist’s job, including equipment testing, shielding design, room layout, and workflow. Consequently, it is imperative that US medical physicists know about existing standards, as well as have input on those under development or undergoing revision. The structure of the IEC and current standards development work will be described in detail. The presentation will explain how US medical physicists can learn about IEC standards and contribute to their development. Learning Objectives: Learn about the structure of the IEC and the influence that IEC standards have on the design of equipment for radiology and radiation therapy. Learn about the mechanisms by which the US participates in the development and revision of standards. Understand the specific requirements of several standards having direct relevance to diagnostic and radiation therapy physicists.« less

TU-G-213-03: IEC Subcommittee 62C (Equipment for Radiotherapy, Nuclear Medicine and Radiation Dosimetry): Recent and Active Projects

DOE Office of Scientific and Technical Information (OSTI.GOV)

Culberson, W.

The International Electrotechnical Commission (IEC) writes standards that manufacturers of electrical equipment must comply with. Medical electrical equipment, such as medical imaging, radiation therapy, and radiation dosimetry devices, fall under Technical Committee 62. Of particular interest to medical physicists are the standards developed within Subcommittees (SC) 62B, which addresses diagnostic radiological imaging equipment, and 62C, which addresses equipment for radiation therapy, nuclear medicine and dosimetry. For example, a Working Group of SC 62B is responsible for safety and quality assurance standards for CT scanners and a Working Group of SC 62C is responsible for standards that set requirements for dosimetricmore » safety and accuracy of linacs and proton accelerators. IEC standards thus have an impact on every aspect of a medical physicist’s job, including equipment testing, shielding design, room layout, and workflow. Consequently, it is imperative that US medical physicists know about existing standards, as well as have input on those under development or undergoing revision. The structure of the IEC and current standards development work will be described in detail. The presentation will explain how US medical physicists can learn about IEC standards and contribute to their development. Learning Objectives: Learn about the structure of the IEC and the influence that IEC standards have on the design of equipment for radiology and radiation therapy. Learn about the mechanisms by which the US participates in the development and revision of standards. Understand the specific requirements of several standards having direct relevance to diagnostic and radiation therapy physicists.« less

Assessment of the NASA Flight Assurance Review Program

NASA Technical Reports Server (NTRS)

Holmes, J.; Pruitt, G.

1983-01-01

The NASA flight assurance review program to develop minimum standard guidelines for flight assurance reviews was assessed. Documents from NASA centers and NASA headquarters to determine current design review practices and procedures were evaluated. Six reviews were identified for the recommended minimum. The practices and procedures used at the different centers to incorporate the most effective ones into the minimum standard review guidelines were analyzed and guidelines for procedures, personnel and responsibilies, review items/data checklist, and feedback and closeout were defined. The six recommended reviews and the minimum standards guidelines developed for flight assurance reviews are presented. Observations and conclusions for further improving the NASA review and quality assurance process are outlined.

Integrated Procedures for Flight and Ground Operations Using International Standards

NASA Technical Reports Server (NTRS)

Ingalls, John

2011-01-01

Imagine astronauts using the same Interactive Electronic Technical Manuals (IETM's) as the ground personnel who assemble or maintain their flight hardware, and having all of that data interoperable with design, logistics, reliability analysis, and training. Modern international standards and their corresponding COTS tools already used in other industries provide a good foundation for streamlined technical publications in the space industry. These standards cover everything from data exchange to product breakdown structure to business rules flexibility. Full Product Lifecycle Support (PLCS) is supported. The concept is to organize, build once, reuse many ways, and integrate. This should apply to all future and some current launch vehicles, payloads, space stations/habitats, spacecraft, facilities, support equipment, and retrieval ships.

Ride quality and international standard ISO 2631 (Guide for the evaluation of human exposure to whole-body vibration)

NASA Technical Reports Server (NTRS)

Allen, G. R.

1975-01-01

The evolution of the standard, which is aimed at promoting research and production of more data, and providing some design guidance, is outlined and its contents summarized. Some of the assumptions and information on which it is based are analyzed. Its application to vehicle ride quality is considered in the context of the safety, efficiency and comfort of crew and passengers. The importance of establishing the precise criteria against which vibration limits are required is underlined, particularly the difficulties of first defining comfort and then postulating appropriate levels. Some current and future work related to improving the standard is outlined and additional suggestions offered.

International Standardization in the Design of "Shore to Ship" - Power Supply Systems of Ships in Port

NASA Astrophysics Data System (ADS)

Tarnapowicz, Dariusz; German-Galkin, Sergiej

2018-03-01

The decisive source of air pollution emissions in ports is the berthed ships. This is primarily caused by the work of ship's autonomous generator sets. One way of reducing the air pollution emissions in ports is the supply of ships from electricity inland system. The main problem connected with the power connection of ships to the inland network is caused by different values of levels and frequencies of voltages in these networks (in various countries) in relation to different values of levels and frequencies of voltages present in the ship's network. It is also important that the source power can range from a few hundred kW up to several MW. In order to realize a universal „Shore to Ship" system that allows the connection of ships to the electricity inland network, the international standardization is necessary. This article presents the current recommendations, standards and regulations for the design of „Shore to Ship" systems.

AutoMOPS- B2B and B2C in mask making: Mask manufacturing performance and customer satisfaction improvement through better information flow management using generic models and standardized languages

NASA Astrophysics Data System (ADS)

Filies, Olaf; de Ridder, Luc; Rodriguez, Ben; Kujiken, Aart

2002-03-01

Semiconductor manufacturing has become a global business, in which companies of different size unite in virtual enterprises to meet new opportunities. Therefore Mask manufacturing is a key business, but mask ordering is a complex process and is always critical regarding design to market time, even though mask complexity and customer base are increasing using a wide variety of different mask order forms which are frequently faulty and very seldom complete. This is effectively blocking agile manufacturing and can tie wafer fabs to a single mask The goal of the project is elimination of the order verification through paperless, electronically linked information sharing/exchange between chip design, mask production and production stages, which will allow automation of the mask preparation. To cover these new techniques and their specifications as well as the common ones with automated tools a special generic Meta-model will be generated, based on the current standards for mask specifications, including the requirements from the involved partners (Alcatel Microelectronics, Altis, Compugraphics, Infineon, Nimble, Sigma-C), the project works out a pre-normative standard. The paper presents the current status of work. This work is partly funded by the Commission of the European Union under the Fifth Framework project IST-1999-10332 AutoMOPS.

76 FR 11339 - Update to NFPA 101, Life Safety Code, for State Home Facilities

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-02

... DEPARTMENT OF VETERANS AFFAIRS 38 CFR Part 51 RIN 2900-AN59 Update to NFPA 101, Life Safety Code..., Life Safety Code. The change is designed to assure that State Home facilities meet current industry- wide standards regarding life safety and fire safety. DATES: Effective Date: This final rule is...

"I Don't Come out with Big Words like Other People": Interviewing Adolescents as Part of Communication Profiling

ERIC Educational Resources Information Center

Spencer, Sarah; Clegg, Judy; Stackhouse, Joy

2010-01-01

Assessing adolescent language skills poses significant challenges due to the subtle nature of language proficiency at this age, along with the high linguistic demands both academically and socially. As with young children, the current range of language assessments designed specifically for adolescents mostly includes standardized tests. This…

Design of a Sixteen Bit Pipelined Adder Using CMOS Bulk P-Well Technology.

DTIC Science & Technology

1984-12-01

node’s current value. These rules are based on the assumption that the event that was last calculated reflects the latest configuraticn of the network...Lines beginning with - are treated as ll comment. The parameter names and their default values are: ;configuration file for ’standard’ MPC procem capm .2a

Preliminary Study of the Effect of Incremental Rehearsal with a Morphological Component for Teaching Chinese Character Recognition

ERIC Educational Resources Information Center

Kwong, Elena; Burns, Matthew K.

2016-01-01

The current study examined the effectiveness of Incremental Rehearsal (IR) for teaching Chinese character recognition using a single-case experimental design. In addition, a morphological component was added to standard IR procedures (IRM) to take into account the role of morphological awareness in Chinese reading. Three kindergarten students in…

Proposals for a Dynamic Library. Technical Report.

ERIC Educational Resources Information Center

Salton, Gerard

The current library environment is first examined, and an attempt is made to explain why the standard approaches to the library problem have been less productive than had been anticipated. A new design is then introduced for modern library operations based on a two-fold strategy: on the input side, the widest possible utilization should be made of…

77 FR 22637 - Federal Motor Vehicle Safety Standards; Accelerator Control Systems

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-16

... severing a conductor at one location. The current language of the test procedure in FMVSS No. 124 is... routinely have variable valve lift and/or timing control. In at least one recent engine design, the level of.... Under the 2002 NPRM, a manufacturer could choose any one of the proposed test procedures as a basis for...

Teachers' Sensemaking about Implementation of an Innovative Science Curriculum across the Settings of Professional Development and Classroom Enactment

ERIC Educational Resources Information Center

de los Santos, Xeng

2017-01-01

Designing professional development that effectively supports teachers in learning new and often challenging practices remains a dilemma for teacher educators. Within the context of current reform efforts in science education, such as the "Next Generation Science Standards," teacher educators are faced with managing the dilemma of how to…

Ontology for Life-Cycle Modeling of Electrical Distribution Systems: Model View Definition

DTIC Science & Technology

2013-06-01

building information models ( BIM ) at the coordinated design stage of building construction. 1.3 Approach To...standard for exchanging Building Information Modeling ( BIM ) data, which defines hundreds of classes for common use in software, currently supported by...specifications, Construction Operations Building in- formation exchange (COBie), Building Information Modeling ( BIM ) 16. SECURITY CLASSIFICATION OF:

Instructional Design Implications about Comprehension of Listening to Music before and during Reading

ERIC Educational Resources Information Center

Hinrichs, Amy F.

2013-01-01

Low reading levels and lack of comprehension are current problems in high school classrooms confirmed by low standardized test scores and employer feedback as comprehension problems move into the workplace with students who do not have the necessary reading skills on the job. Midwestern high school science club students served as participants in…

Skin cancer and inorganic arsenic: uncertainty-status of risk.

PubMed

Brown, K G; Guo, H R; Kuo, T L; Greene, H L

1997-02-01

The current U.S. EPA standard for inorganic arsenic in drinking water is 50 ppb (microgram/L), dating to the National Interim Primary Drinking Water Regulation of 1976. The current EPA risk analysis predicts an increased lifetime skin cancer risk on the order of 3 or 4 per 1000 from chronic exposure at that concentration. Revision of the standard to only a few ppb, perhaps even less than 1 ppb, may be indicated by the EPA analysis to reduce the lifetime risk to an acceptable level. The cost to water utilities, and ultimately to their consumers, to conform to such a large reduction in the standard could easily reach several billion dollars, so it is particularly important to assess accurately the current risk and the risk reduction that would be achieved by a lower standard. This article addresses the major sources of uncertainty in the EPA analysis with respect to this objective. Specifically, it focuses on uncertainty and variability in the exposure estimates for the landmark study of Tseng and colleagues in Taiwan, analyzed using a reconstruction of the their exposure data. It is concluded that while the available dataset is suitable to establish the hazard of skin cancer, it is too highly summarized for reliable dose-response assessment. A new epidemiologic study is needed, designed for the requirements of dose-response assessment.

Power supply standardization and optimization study

NASA Technical Reports Server (NTRS)

Ware, C. L.; Ragusa, E. V.

1972-01-01

A comprehensive design study of a power supply for use in the space shuttle and other space flight applications is presented. The design specifications are established for a power supply capable of supplying over 90 percent of the anticipated voltage requirements for future spacecraft avionics systems. Analyses and tradeoff studies were performed on several alternative design approaches to assure that the selected design would provide near optimum performance of the planned applications. The selected design uses a dc-to-dc converter incorporating regenerative current feedback with a time-ratio controlled duty cycle to achieve high efficiency over a wide variation in input voltage and output loads. The packaging concept uses an expandable mainframe capable of accommodating up to six inverter/regulator modules with one common input filter module.

Space Flyable Hg(sup +) Frequency Standards

NASA Technical Reports Server (NTRS)

Prestage, John D.; Maleki, Lute

1994-01-01

We discuss a design for a space based atomic frequency standard (AFS) based on Hg(sup +) ions confined in a linear ion trap. This newly developed AFS should be well suited for space borne applications because it can supply the ultra-high stability of a H-maser but its total mass is comparable to that of a NAVSTAR/GPS cesium clock, i.e., about 11kg. This paper will compare the proposed Hg(sup +) AFS to the present day GPS cesium standards to arrive at the 11 kg mass estimate. The proposed space borne Hg(sup +) standard is based upon the recently developed extended linear ion trap architecture which has reduced the size of existing trapped Hg(sup +) standards to a physics package which is comparable in size to a cesium beam tube. The demonstrated frequency stability to below 10(sup -15) of existing Hg(sup +) standards should be maintained or even improved upon in this new architecture. This clock would deliver far more frequency stability per kilogram than any current day space qualified standard.

NASA Manned Launch Vehicle Lightning Protection Development

NASA Technical Reports Server (NTRS)

McCollum, Matthew B.; Jones, Steven R.; Mack, Jonathan D.

2009-01-01

Historically, the National Aeronautics and Space Administration (NASA) relied heavily on lightning avoidance to protect launch vehicles and crew from lightning effects. As NASA transitions from the Space Shuttle to the new Constellation family of launch vehicles and spacecraft, NASA engineers are imposing design and construction standards on the spacecraft and launch vehicles to withstand both the direct and indirect effects of lightning. A review of current Space Shuttle lightning constraints and protection methodology will be presented, as well as a historical review of Space Shuttle lightning requirements and design. The Space Shuttle lightning requirements document, NSTS 07636, Lightning Protection, Test and Analysis Requirements, (originally published as document number JSC 07636, Lightning Protection Criteria Document) was developed in response to the Apollo 12 lightning event and other experiences with NASA and the Department of Defense launch vehicles. This document defined the lightning environment, vehicle protection requirements, and design guidelines for meeting the requirements. The criteria developed in JSC 07636 were a precursor to the Society of Automotive Engineers (SAE) lightning standards. These SAE standards, along with Radio Technical Commission for Aeronautics (RTCA) DO-160, Environmental Conditions and Test Procedures for Airborne Equipment, are the basis for the current Constellation lightning design requirements. The development and derivation of these requirements will be presented. As budget and schedule constraints hampered lightning protection design and verification efforts, the Space Shuttle elements waived the design requirements and relied on lightning avoidance in the form of launch commit criteria (LCC) constraints and a catenary wire system for lightning protection at the launch pads. A better understanding of the lightning environment has highlighted the vulnerability of the protection schemes and associated risk to the vehicle, which has resulted in lost launch opportunities and increased expenditures in manpower to assess Space Shuttle vehicle health and safety after lightning events at the launch pad. Because of high-percentage launch availability and long-term on-pad requirements, LCC constraints are no longer considered feasible. The Constellation vehicles must be designed to withstand direct and indirect effects of lightning. A review of the vehicle design and potential concerns will be presented as well as the new catenary lightning protection system for the launch pad. This system is required to protect the Constellation vehicles during launch processing when vehicle lightning effects protection might be compromised by such items as umbilical connections and open access hatches.

Assembling Appliances Standards from a Basket of Functions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Siderious, Hans-Paul; Meier, Alan

2014-08-11

Rapid innovation in product design challenges the current methodology for setting standards and labels, especially for electronics, software and networking. Major problems include defining the product, measuring its energy consumption, and choosing the appropriate metric and level for the standard. Most governments have tried to solve these problems by defining ever more specific product subcategories, along with their corresponding test methods and metrics. An alternative approach would treat each energy-using product as something that delivers a basket of functions. Then separate standards would be constructed for the individual functions that can be defined, tested, and evaluated. Case studies of thermostats,more » displays and network equipment are presented to illustrate the problems with the classical approach for setting standards and indicate the merits and drawbacks of the alternative. The functional approach appears best suited to products whose primary purpose is processing information and that have multiple functions.« less

The Contribution of Expanding Portion Sizes to the US Obesity Epidemic

PubMed Central

Young, Lisa R.; Nestle, Marion

2002-01-01

Objectives. Because larger food portions could be contributing to the increasing prevalence of overweight and obesity, this study was designed to weigh samples of marketplace foods, identify historical changes in the sizes of those foods, and compare current portions with federal standards. Methods. We obtained information about current portions from manufacturers or from direct weighing; we obtained information about past portions from manufacturers or contemporary publications. Results. Marketplace food portions have increased in size and now exceed federal standards. Portion sizes began to grow in the 1970s, rose sharply in the 1980s, and have continued in parallel with increasing body weights. Conclusions. Because energy content increases with portion size, educational and other public health efforts to address obesity should focus on the need for people to consume smaller portions. PMID:11818300

Information Technology: A Tool to Cut Health Care Costs

NASA Technical Reports Server (NTRS)

Mukkamala, Ravi; Maly, K. J.; Overstreet, C. M.; Foudriat, E. C.

1996-01-01

Old Dominion University embarked on a project to see how current computer technology could be applied to reduce the cost and or to improve the efficiency of health care services. We designed and built a prototype for an integrated medical record system (MRS). The MRS is written in Tool control language/Tool kit (Tcl/Tk). While the initial version of the prototype had patient information hard coded into the system, later versions used an INGRES database for storing patient information. Currently, we have proposed an object-oriented model for implementing MRS. These projects involve developing information systems for physicians and medical researchers to enhance their ability for improved treatment at reduced costs. The move to computerized patient records is well underway, several standards exist for laboratory records, and several groups are working on standards for other portions of the patient record.

The NASA F-106B Storm Hazards Program

NASA Technical Reports Server (NTRS)

Neely, W. R., Jr.; Fisher, B. D.

1983-01-01

During the NASA LRC Storm Hazards Program, 698 thunderstorm precipitations were made from 1980 to 1983 with an F-106B aircraft in order to record direct lightning strike data and the associated flight conditions. It was found that each of the three composite fin caps tested experienced multiple lightning attachments with only minor cosmetic damage. The maximum current level was only 20 ka, which is well below the design standard of 200 ka; however, indications are that the current rate of rise standard has been approached and may be exceeded in a major strike. The peak lightning strike rate occurred at ambient temperatures between -40 and -45 C, while most previously reported strikes have occurred at or near the freezing level. No significant operational difficulties or major aircraft damage resulting from the thunderstorm penetrations have been found.

Multijunction high voltage concentrator solar cells

NASA Technical Reports Server (NTRS)

Valco, G. J.; Kapoor, V. J.; Evans, J. C.; Chai, A.-T.

1981-01-01

The standard integrated circuit technology has been developed to design and fabricate new innovative planar multi-junction solar cell chips for concentrated sunlight applications. This 1 cm x 1 cm cell consisted of several voltage generating regions called unit cells which were internally connected in series within a single chip resulting in high open circuit voltages. Typical open-circuit voltages of 3.6 V and short-circuit currents of 90 ma were obtained at 80 AM1 suns. A dramatic increase in both short circuit current and open circuit voltage with increased light levels was observed.

Urban Automation Networks: Current and Emerging Solutions for Sensed Data Collection and Actuation in Smart Cities.

PubMed

Gomez, Carles; Paradells, Josep

2015-09-10

Urban Automation Networks (UANs) are being deployed worldwide in order to enable Smart City applications. Given the crucial role of UANs, as well as their diversity, it is critically important to assess their properties and trade-offs. This article introduces the requirements and challenges for UANs, characterizes the main current and emerging UAN paradigms, provides guidelines for their design and/or choice, and comparatively examines their performance in terms of a variety of parameters including coverage, power consumption, latency, standardization status and economic cost.

SCaN Network Ground Station Receiver Performance for Future Service Support

NASA Technical Reports Server (NTRS)

Estabrook, Polly; Lee, Dennis; Cheng, Michael; Lau, Chi-Wung

2012-01-01

Objectives: Examine the impact of providing the newly standardized CCSDS Low Density Parity Check (LDPC) codes to the SCaN return data service on the SCaN SN and DSN ground stations receivers: SN Current Receiver: Integrated Receiver (IR). DSN Current Receiver: Downlink Telemetry and Tracking (DTT) Receiver. Early Commercial-Off-The-Shelf (COTS) prototype of the SN User Service Subsystem Component Replacement (USS CR) Narrow Band Receiver. Motivate discussion of general issues of ground station hardware design to enable simple and cheap modifications for support of future services.

Urban Automation Networks: Current and Emerging Solutions for Sensed Data Collection and Actuation in Smart Cities

PubMed Central

Gomez, Carles; Paradells, Josep

2015-01-01

Urban Automation Networks (UANs) are being deployed worldwide in order to enable Smart City applications. Given the crucial role of UANs, as well as their diversity, it is critically important to assess their properties and trade-offs. This article introduces the requirements and challenges for UANs, characterizes the main current and emerging UAN paradigms, provides guidelines for their design and/or choice, and comparatively examines their performance in terms of a variety of parameters including coverage, power consumption, latency, standardization status and economic cost. PMID:26378534

An improved offset generator developed for Allan deviation measurement of ultra stable frequency standards

NASA Technical Reports Server (NTRS)

Hamell, Robert L.; Kuhnle, Paul F.; Sydnor, Richard L.

1992-01-01

Measuring the performance of ultra stable frequency standards such as the Superconducting Cavity Maser Oscillator (SCMO) necessitates improvement of some test instrumentation. The frequency stability test equipment used at JPL includes a 1 Hz Offset Generator to generate a beat frequency between a pair of 100 MHz signals that are being compared. The noise floor of the measurement system using the current Offset Generator is adequate to characterize stability of hydrogen masers, but it is not adequate for the SCMO. A new Offset Generator with improved stability was designed and tested at JPL. With this Offset Generator and a new Zero Crossing Detector, recently developed at JPL, the measurement flow was reduced by a factor of 5.5 at 1 second tau, 3.0 at 1000 seconds, and 9.4 at 10,000 seconds, compared against the previous design. In addition to the new circuit designs of the Offset Generator and Zero Crossing Detector, tighter control of the measurement equipment environment was required to achieve this improvement. The design of this new Offset Generator are described, along with details of the environment control methods used.

The Role of Rendering in the Competence Project in Measurement Science for Optical Reflection and Scattering

PubMed Central

Westlund, Harold B.; Meyer, Gary W.; Hunt, Fern Y.

2002-01-01

Computer rendering is used to simulate the appearance of lighted objects for applications in architectural design, for animation and simulation in the entertainment industry, and for display and design in the automobile industry. Rapid advances in computer graphics technology suggest that in the near future it will be possible to produce photorealistic images of coated surfaces from scattering data. This could enable the identification of important parameters in the coatings manufacturing process that lead to desirable appearance, and to the design of virtual surfaces by visualizing prospective coating formulations once their optical properties are known. Here we report the results of our work to produce visually and radiometrically accurate renderings of selected appearance attributes of sample coated surfaces. It required changes in the rendering programs, which in general are not designed to accept high quality optical and material measurements, and changes in the optical measurement protocols. An outcome of this research is that some current ASTM standards can be replaced or enhanced by computer based standards of appearance. PMID:27446729

Heat Transfer Analysis in Wire Bundles for Aerospace Vehicles

NASA Technical Reports Server (NTRS)

Rickman, S. L.; Iamello, C. J.

2016-01-01

Design of wiring for aerospace vehicles relies on an understanding of "ampacity" which refers to the current carrying capacity of wires, either, individually or in wire bundles. Designers rely on standards to derate allowable current flow to prevent exceedance of wire temperature limits due to resistive heat dissipation within the wires or wire bundles. These standards often add considerable margin and are based on empirical data. Commercial providers are taking an aggressive approach to wire sizing which challenges the conventional wisdom of the established standards. Thermal modelling of wire bundles may offer significant mass reduction in a system if the technique can be generalized to produce reliable temperature predictions for arbitrary bundle configurations. Thermal analysis has been applied to the problem of wire bundles wherein any or all of the wires within the bundle may carry current. Wire bundles present analytical challenges because the heat transfer path from conductors internal to the bundle is tortuous, relying on internal radiation and thermal interface conductance to move the heat from within the bundle to the external jacket where it can be carried away by convective and radiative heat transfer. The problem is further complicated by the dependence of wire electrical resistivity on temperature. Reduced heat transfer out of the bundle leads to higher conductor temperatures and, hence, increased resistive heat dissipation. Development of a generalized wire bundle thermal model is presented and compared with test data. The steady state heat balance for a single wire is derived and extended to the bundle configuration. The generalized model includes the effects of temperature varying resistance, internal radiation and thermal interface conductance, external radiation and temperature varying convective relief from the free surface. The sensitivity of the response to uncertainties in key model parameters is explored using Monte Carlo analysis.

Workflow of CAD / CAM Scoliosis Brace Adjustment in Preparation Using 3D Printing.

PubMed

Weiss, Hans-Rudolf; Tournavitis, Nicos; Nan, Xiaofeng; Borysov, Maksym; Paul, Lothar

2017-01-01

High correction bracing is the most effective conservative treatment for patients with scoliosis during growth. Still today braces for the treatment of scoliosis are made by casting patients while computer aided design (CAD) and computer aided manufacturing (CAM) is available with all possibilities to standardize pattern specific brace treatment and improve wearing comfort. CAD / CAM brace production mainly relies on carving a polyurethane foam model which is the basis for vacuuming a polyethylene (PE) or polypropylene (PP) brace. Purpose of this short communication is to describe the workflow currently used and to outline future requirements with respect to 3D printing technology. Description of the steps of virtual brace adjustment as available today are content of this paper as well as an outline of the great potential there is for the future 3D printing technology. For 3D printing of scoliosis braces it is necessary to establish easy to use software plug-ins in order to allow adding 3D printing technology to the current workflow of virtual CAD / CAM brace adjustment. Textures and structures can be added to the brace models at certain well defined locations offering the potential of more wearing comfort without losing in-brace correction. Advances have to be made in the field of CAD / CAM software tools with respect to design and generation of individually structured brace models based on currently well established and standardized scoliosis brace libraries.

Multilevel DC Link Inverter for Brushless Permanent Magnet Motors with Very Low Inductance

DOE Office of Scientific and Technical Information (OSTI.GOV)

Su, G.J.

2001-10-29

Due to their long effective air gaps, permanent magnet motors tend to have low inductance. The use of ironless stator structure in present high power PM motors (several tens of kWs) reduces the inductance even further (< 100 {micro}H). This low inductance imposes stringent current regulation demands for the inverter to obtain acceptable current ripple. An analysis of the current ripple for these low inductance brushless PM motors shows that a standard inverter with the most commonly used IGBT switching devices cannot meet the current regulation demands and will produce unacceptable current ripples due to the IGBT's limited switching frequency.more » This paper introduces a new multilevel dc link inverter, which can dramatically reduce the current ripple for brushless PM motor drives. The operating principle and design guidelines are included.« less

LIGHT-EMITTING DIODE TECHNOLOGY IMPROVES INSECT TRAPPING

PubMed Central

GILLEN, JONATHON I.; MUNSTERMANN, LEONARD E.

2008-01-01

In a climate of increased funding for vaccines, chemotherapy, and prevention of vector-borne diseases, fewer resources have been directed toward improving disease and vector surveillance. Recently developed light-emitting diode (LED) technology was applied to standard insect-vector traps to produce a more effective lighting system. This approach improved phlebotomine sand fly capture rates by 50%, and simultaneously reduced the energy consumption by 50–60%. The LEDs were incorporated into 2 lighting designs, 1) a LED combination bulb for current light traps and 2) a chip-based LED design for a modified Centers for Disease Control and Prevention light trap. Detailed descriptions of the 2 designs are presented. PMID:18666546

Sample size requirements for separating out the effects of combination treatments: randomised controlled trials of combination therapy vs. standard treatment compared to factorial designs for patients with tuberculous meningitis.

PubMed

Wolbers, Marcel; Heemskerk, Dorothee; Chau, Tran Thi Hong; Yen, Nguyen Thi Bich; Caws, Maxine; Farrar, Jeremy; Day, Jeremy

2011-02-02

In certain diseases clinical experts may judge that the intervention with the best prospects is the addition of two treatments to the standard of care. This can either be tested with a simple randomized trial of combination versus standard treatment or with a 2 x 2 factorial design. We compared the two approaches using the design of a new trial in tuberculous meningitis as an example. In that trial the combination of 2 drugs added to standard treatment is assumed to reduce the hazard of death by 30% and the sample size of the combination trial to achieve 80% power is 750 patients. We calculated the power of corresponding factorial designs with one- to sixteen-fold the sample size of the combination trial depending on the contribution of each individual drug to the combination treatment effect and the strength of an interaction between the two. In the absence of an interaction, an eight-fold increase in sample size for the factorial design as compared to the combination trial is required to get 80% power to jointly detect effects of both drugs if the contribution of the less potent treatment to the total effect is at least 35%. An eight-fold sample size increase also provides a power of 76% to detect a qualitative interaction at the one-sided 10% significance level if the individual effects of both drugs are equal. Factorial designs with a lower sample size have a high chance to be underpowered, to show significance of only one drug even if both are equally effective, and to miss important interactions. Pragmatic combination trials of multiple interventions versus standard therapy are valuable in diseases with a limited patient pool if all interventions test the same treatment concept, it is considered likely that either both or none of the individual interventions are effective, and only moderate drug interactions are suspected. An adequately powered 2 x 2 factorial design to detect effects of individual drugs would require at least 8-fold the sample size of the combination trial. Current Controlled Trials ISRCTN61649292.

Quality Assurance Program Plan for SFR Metallic Fuel Data Qualification

DOE Office of Scientific and Technical Information (OSTI.GOV)

Benoit, Timothy; Hlotke, John Daniel; Yacout, Abdellatif

2017-07-05

This document contains an evaluation of the applicability of the current Quality Assurance Standards from the American Society of Mechanical Engineers Standard NQA-1 (NQA-1) criteria and identifies and describes the quality assurance process(es) by which attributes of historical, analytical, and other data associated with sodium-cooled fast reactor [SFR] metallic fuel and/or related reactor fuel designs and constituency will be evaluated. This process is being instituted to facilitate validation of data to the extent that such data may be used to support future licensing efforts associated with advanced reactor designs. The initial data to be evaluated under this program were generatedmore » during the US Integral Fast Reactor program between 1984-1994, where the data includes, but is not limited to, research and development data and associated documents, test plans and associated protocols, operations and test data, technical reports, and information associated with past United States Nuclear Regulatory Commission reviews of SFR designs.« less

MAPA: Implementation of the Standard Interchange Format and use for analyzing lattices

NASA Astrophysics Data System (ADS)

Shasharina, Svetlana G.; Cary, John R.

1997-05-01

MAPA (Modular Accelerator Physics Analysis) is an object oriented application for accelerator design and analysis with a Motif based graphical user interface. MAPA has been ported to AIX, Linux, HPUX, Solaris, and IRIX. MAPA provides an intuitive environment for accelerator study and design. The user can bring up windows for fully nonlinear analysis of accelerator lattices in any number of dimensions. The current graphical analysis methods of Lifetime plots and Surfaces of Section have been used to analyze the improved lattice designs of Wan, Cary, and Shasharina (this conference). MAPA can now read and write Standard Interchange Format (MAD) accelerator description files and it has a general graphical user interface for adding, changing, and deleting elements. MAPA's consistency checks prevent deletion of used elements and prevent creation of recursive beam lines. Plans include development of a richer set of modeling tools and the ability to invoke existing modeling codes through the MAPA interface. MAPA will be demonstrated on a Pentium 150 laptop running Linux.

Building information modelling review with potential applications in tunnel engineering of China.

PubMed

Zhou, Weihong; Qin, Haiyang; Qiu, Junling; Fan, Haobo; Lai, Jinxing; Wang, Ke; Wang, Lixin

2017-08-01

Building information modelling (BIM) can be applied to tunnel engineering to address a number of problems, including complex structure, extensive design, long construction cycle and increased security risks. To promote the development of tunnel engineering in China, this paper combines actual cases, including the Xingu mountain tunnel and the Shigu Mountain tunnel, to systematically analyse BIM applications in tunnel engineering in China. The results indicate that BIM technology in tunnel engineering is currently mainly applied during the design stage rather than during construction and operation stages. The application of BIM technology in tunnel engineering covers many problems, such as a lack of standards, incompatibility of different software, disorganized management, complex combination with GIS (Geographic Information System), low utilization rate and poor awareness. In this study, through summary of related research results and engineering cases, suggestions are introduced and an outlook for the BIM application in tunnel engineering in China is presented, which provides guidance for design optimization, construction standards and later operation maintenance.

Design and Characterization of a Photometer-Colorimeter Standard

NASA Astrophysics Data System (ADS)

Eppeldauer, George P.; Rácz, Miklós

2004-05-01

A photometer and tristimulus colorimeter has been developed at the National Institute of Standards and Technology (NIST) to realize a color scale. A novel construction was developed to implement the spectral-responsivity-based scale with small uncertainty. The new device can be used as a reference illuminance and luminance meter as well. Temperature-controlled filter combinations, with 5-8 layers in one package, are used to match the responsivity of a silicon tunnel-trap detector to the CIE color-matching functions with small spectral mismatch values (f1'). Design considerations to extend the tunnel-trap detector with replaceable single and double apertures and changeable filter combinations are described. The design and fabrication of the filter packages and the dependence of the f1' values on the thickness of the filter layers are discussed. The colorimeter was characterized for angular, spatial, and spectral responsivity. An improved preamplifier can convert current to voltage in an 11-decade dynamic range with 0.01% uncertainty.

Design and characterization of a photometer-colorimeter standard.

PubMed

Eppeldauer, George P; Rácz, Miklós

2004-05-01

A photometer and tristimulus colorimeter has been developed at the National Institute of Standards and Technology (NIST) to realize a color scale. A novel construction was developed to implement the spectral-responsivity-based scale with small uncertainty. The new device can be used as a reference illuminance and luminance meter as well. Temperature-controlled filter combinations, with 5-8 layers in one package, are used to match the responsivity of a silicon tunnel-trap detector to the CIE color-matching functions with small spectral mismatch values (f1'). Design considerations to extend the tunnel-trap detector with replaceable single and double apertures and changeable filter combinations are described. The design and fabrication of the filter packages and the dependence of the f1' values on the thickness of the filter layers are discussed. The colorimeter was characterized for angular, spatial, and spectral responsivity. An improved preamplifier can convert current to voltage in an 11-decade dynamic range with 0.01% uncertainty.

Open-systems architecture of a standardized command interface chip-set for switching and control of a spacecraft power bus

NASA Technical Reports Server (NTRS)

Ruiz, Ian B.; Burke, Gary R.; Lung, Gerald; Whitaker, William D.; Nowicki, Robert M.

2004-01-01

The Jet Propulsion Laboratory (JPL) has developed a command interface chip-set that primarily consists of two mixed-signal ASICs'; the Command Interface ASIC (CIA) and Analog Interface ASIC (AIA). The Open-systems architecture employed during the design of this chip-set enables its use as both an intelligent gateway between the system's flight computer and the control, actuation, and activation of the spacecraft's loads, valves, and pyrotechnics respectfully as well as the regulator of the spacecraft power bus. Furthermore, the architecture is highly adaptable and employed fault-tolerant design methods enabling a host of other mission uses including reliable remote data collection. The objective of this design is to both provide a needed flight component that meets the stringent environmental requirements of current deep space missions and to add a new element to a growing library that can be used as a standard building block for future missions to the outer planets.

Building information modelling review with potential applications in tunnel engineering of China

PubMed Central

Zhou, Weihong; Qin, Haiyang; Fan, Haobo; Lai, Jinxing; Wang, Ke; Wang, Lixin

2017-01-01

Building information modelling (BIM) can be applied to tunnel engineering to address a number of problems, including complex structure, extensive design, long construction cycle and increased security risks. To promote the development of tunnel engineering in China, this paper combines actual cases, including the Xingu mountain tunnel and the Shigu Mountain tunnel, to systematically analyse BIM applications in tunnel engineering in China. The results indicate that BIM technology in tunnel engineering is currently mainly applied during the design stage rather than during construction and operation stages. The application of BIM technology in tunnel engineering covers many problems, such as a lack of standards, incompatibility of different software, disorganized management, complex combination with GIS (Geographic Information System), low utilization rate and poor awareness. In this study, through summary of related research results and engineering cases, suggestions are introduced and an outlook for the BIM application in tunnel engineering in China is presented, which provides guidance for design optimization, construction standards and later operation maintenance. PMID:28878970

Building information modelling review with potential applications in tunnel engineering of China

NASA Astrophysics Data System (ADS)

Zhou, Weihong; Qin, Haiyang; Qiu, Junling; Fan, Haobo; Lai, Jinxing; Wang, Ke; Wang, Lixin

2017-08-01

Building information modelling (BIM) can be applied to tunnel engineering to address a number of problems, including complex structure, extensive design, long construction cycle and increased security risks. To promote the development of tunnel engineering in China, this paper combines actual cases, including the Xingu mountain tunnel and the Shigu Mountain tunnel, to systematically analyse BIM applications in tunnel engineering in China. The results indicate that BIM technology in tunnel engineering is currently mainly applied during the design stage rather than during construction and operation stages. The application of BIM technology in tunnel engineering covers many problems, such as a lack of standards, incompatibility of different software, disorganized management, complex combination with GIS (Geographic Information System), low utilization rate and poor awareness. In this study, through summary of related research results and engineering cases, suggestions are introduced and an outlook for the BIM application in tunnel engineering in China is presented, which provides guidance for design optimization, construction standards and later operation maintenance.

Simple BiCMOS CCCTA design and resistorless analog function realization.

PubMed

Tangsrirat, Worapong

2014-01-01

The simple realization of the current-controlled conveyor transconductance amplifier (CCCTA) in BiCMOS technology is introduced. The proposed BiCMOS CCCTA realization is based on the use of differential pair and basic current mirror, which results in simple structure. Its characteristics, that is, parasitic resistance (R x) and current transfer (i o/i z), are also tunable electronically by external bias currents. The realized circuit is suitable for fabrication using standard 0.35 μm BiCMOS technology. Some simple and compact resistorless applications employing the proposed CCCTA as active elements are also suggested, which show that their circuit characteristics with electronic controllability are obtained. PSPICE simulation results demonstrating the circuit behaviors and confirming the theoretical analysis are performed.

Digitally controlled twelve-pulse firing generator

DOE Office of Scientific and Technical Information (OSTI.GOV)

Berde, D.; Ferrara, A.A.

1981-01-01

Control System Studies for the Tokamak Fusion Test Reactor (TFTR) indicate that accurate thyristor firing in the AC-to-DC conversion system is required in order to achieve good regulation of the various field currents. Rapid update and exact firing angle control are required to avoid instabilities, large eddy currents, or parasitic oscillations. The Prototype Firing Generator was designed to satisfy these requirements. To achieve the required /plus or minus/0.77/degree/firing accuracy, a three-phase-locked loop reference was designed; otherwise, the Firing Generator employs digital circuitry. The unit, housed in a standard CAMAC crate, operates under microcomputer control. Functions are performed under program control,more » which resides in nonvolatile read-only memory. Communication with CICADA control system is provided via an 11-bit parallel interface.« less

[Thinking on designation of sham acupuncture in clinical research].

PubMed

Pan, Li-Jia; Chen, Bo; Zhao, Xue; Guo, Yi

2014-01-01

Randomized controlled trials (RCT) is the source of the raw data of evidence-based medicine. Blind method is adopted in most of the high-quality RCT. Sham acupuncture is the main form of blinded in acupuncture clinical trial. In order to improve the quality of acupuncture clinical trail, based on the necessity of sham acupuncture in clinical research, the current situation as well as the existing problems of sham acupuncture, suggestions were put forward from the aspects of new way and new designation method which can be adopted as reference, and factors which have to be considered during the process of implementing. Various subjective and objective factors involving in the process of trial should be considered, and used of the current international standards, try to be quantification, and carry out strict quality monitoring.

Design Life Level: Quantifying risk in a changing climate

NASA Astrophysics Data System (ADS)

Rootzén, Holger; Katz, Richard W.

2013-09-01

In the past, the concepts of return levels and return periods have been standard and important tools for engineering design. However, these concepts are based on the assumption of a stationary climate and do not apply to a changing climate, whether local or global. In this paper, we propose a refined concept, Design Life Level, which quantifies risk in a nonstationary climate and can serve as the basis for communication. In current practice, typical hydrologic risk management focuses on a standard (e.g., in terms of a high quantile corresponding to the specified probability of failure for a single year). Nevertheless, the basic information needed for engineering design should consist of (i) the design life period (e.g., the next 50 years, say 2015-2064); and (ii) the probability (e.g., 5% chance) of a hazardous event (typically, in the form of the hydrologic variable exceeding a high level) occurring during the design life period. Capturing both of these design characteristics, the Design Life Level is defined as an upper quantile (e.g., 5%) of the distribution of the maximum value of the hydrologic variable (e.g., water level) over the design life period. We relate this concept and variants of it to existing literature and illustrate how they, and some useful complementary plots, may be computed and used. One practically important consideration concerns quantifying the statistical uncertainty in estimating a high quantile under nonstationarity.

First lunar outpost

NASA Technical Reports Server (NTRS)

Andino, Aureo F.; Silva, Daniel; Ortiz, Nelson; Alvarez, Omar; Colon, Julio A.; Colon, Myrelle; Diaz, Alicia; Escobar, Xochiquetzal Y.; Garcia, Alberto; Gonzalez, Isabel C.

1992-01-01

Design and research efforts at the University of Puerto Rico have focused on the evaluation and refinement of the Habitability Criteria for a prolonged human presence in space during the last four years. Living quarters for a Mars mission and a third generation lunar base concept were proposed. This academic year, 1991-92, work on further refinement of the habitability criteria and design of partial gravity furniture was carried on. During the first semester, design alternatives for furniture necessary in a habitat design optimized for lunar and Martian environments were developed. Designs are based on recent research data from lunar and Mars gravity simulations, and current NASA standards. Artifacts will be submitted to NASA architects to be tested in KC-135 flights. Test findings will be submitted for incorporation in future updates to NASA habitat design standards. Second semester work was aimed at integrating these findings into the First Lunar Outpost (FLO), a mission scenario currently being considered by NASA. The mission consists of a manned return to the moon by crews of four astronauts for periods of 45 days. The major hardware components of the mission are as follows: (1) a Crew Module for the delivery of the crew and their supplies, and (2) the Habitat Module, which will arrive on the Moon unmanned. Our design efforts concentrated on this Habitat Module and on application of habitability criteria. Different geometries for the pressure vessel and their impact on the interior architecture were studied. Upon the selection of a geometry, a more detailed analysis of the interior design was performed, taking into consideration the reduced gravity, and the protection against radiation, micrometeorites, and the extreme temperature variation. A proposal for a FLO was submitted by the students, consisting essentially of a 24-feet (7.3 m.) by 35-feet (10.67 m) high vertical cylinder with work areas, crew quarters, galley, wardroom, leisure facilities, health maintenance, waste management, EVA operations facilities, and safe havens.

SMART: The Future of Spaceflight Avionics

NASA Technical Reports Server (NTRS)

Alhorn, Dean C.; Howard, David E.

2010-01-01

A novel avionics approach is necessary to meet the future needs of low cost space and lunar missions that require low mass and low power electronics. The current state of the art for avionics systems are centralized electronic units that perform the required spacecraft functions. These electronic units are usually custom-designed for each application and the approach compels avionics designers to have in-depth system knowledge before design can commence. The overall design, development, test and evaluation (DDT&E) cycle for this conventional approach requires long delivery times for space flight electronics and is very expensive. The Small Multi-purpose Advanced Reconfigurable Technology (SMART) concept is currently being developed to overcome the limitations of traditional avionics design. The SMART concept is based upon two multi-functional modules that can be reconfigured to drive and sense a variety of mechanical and electrical components. The SMART units are key to a distributed avionics architecture whereby the modules are located close to or right at the desired application point. The drive module, SMART-D, receives commands from the main computer and controls the spacecraft mechanisms and devices with localized feedback. The sensor module, SMART-S, is used to sense the environmental sensors and offload local limit checking from the main computer. There are numerous benefits that are realized by implementing the SMART system. Localized sensor signal conditioning electronics reduces signal loss and overall wiring mass. Localized drive electronics increase control bandwidth and minimize time lags for critical functions. These benefits in-turn reduce the main processor overhead functions. Since SMART units are standard flight qualified units, DDT&E is reduced and system design can commence much earlier in the design cycle. Increased production scale lowers individual piece part cost and using standard modules also reduces non-recurring costs. The benefit list continues, but the overall message is already evident: the SMART concept is an evolution in spacecraft avionics. SMART devices have the potential to change the design paradigm for future satellites, spacecraft and even commercial applications.

Evaluation of a standard provision versus an autonomy promotive exercise referral programme: rationale and study design

PubMed Central

Jolly, Kate; Duda, Joan L; Daley, Amanda; Eves, Frank F; Mutrie, Nanette; Ntoumanis, Nikos; Rouse, Peter C; Lodhia, Rekha; Williams, Geoffrey C

2009-01-01

Background The National Institute of Clinical Excellence in the UK has recommended that the effectiveness of ongoing exercise referral schemes to promote physical activity should be examined in research trials. Recent empirical evidence in health care and physical activity promotion contexts provides a foundation for testing the utility of a Self Determination Theory (SDT)-based exercise referral consultation. Methods/Design Design: An exploratory cluster randomised controlled trial comparing standard provision exercise on prescription with a Self Determination Theory-based (SDT) exercise on prescription intervention. Participants: 347 people referred to the Birmingham Exercise on Prescription scheme between November 2007 and July 2008. The 13 exercise on prescription sites in Birmingham were randomised to current practice (n = 7) or to the SDT-based intervention (n = 6). Outcomes measured at 3 and 6-months: Minutes of moderate or vigorous physical activity per week assessed using the 7-day Physical Activity Recall; physical health: blood pressure and weight; health status measured using the Dartmouth CO-OP charts; anxiety and depression measured by the Hospital Anxiety and Depression Scale and vitality measured by the subjective vitality score; motivation and processes of change: perceptions of autonomy support from the advisor, satisfaction of the needs for competence, autonomy, and relatedness via physical activity, and motivational regulations for exercise. Discussion This trial will determine whether an exercise referral programme based on Self Determination Theory increases physical activity and other health outcomes compared to a standard programme and will test the underlying SDT-based process model (perceived autonomy support, need satisfaction, motivation regulations, outcomes) via structural equation modelling. Trial registration The trial is registered as Current Controlled trials ISRCTN07682833. PMID:19505293

Ergonomic assessment of enhanced protection under body armour combat shirt neck collars.

PubMed

Breeze, John; Granger, C J; Pearkes, T D; Clasper, J C

2014-03-01

Combat neck injury due to explosively propelled fragments is a significant cause of mortality and long-term morbidity in UK soldiers deployed on current operations. Reinforcing the collar of the existing under body armour combat shirt (UBACS) has been suggested as a potential method for reducing the incidence of combat neck injury. 20 soldiers serving in Afghanistan objectively compared three designs of enhanced protection UBACS (EP-UBACS) using 10 representative military tasks against a baseline of a standard UBACS. Each EP-UBACS design was trialled using three constituent materials: two layers of para-aramid felt, one layer of ultra high molecule weight polyethylene (UHMWPE) felt or two layers of a silk fabric. Subjective assessment of these nine configurations in terms of comfort, heat dissipation and overall acceptability were compared with the standard UBACS using a χ² test. All military tasks could be performed with all nine configurations of EP-UBACS. Although silk was the most comfortable material, it was not functionally practical in any of the three designs. Crossover collars incorporating UHMWPE or para-aramid were the only two of the nine configurations to demonstrate similar user acceptability to a standard UBACS. The EP-UBACS has the potential to provide neck protection without reducing performance incorporating materials analogous to either of the felts assessed in this study. The collar should provide stand-off from the skin to improve heat dissipation and comfort, which can be maximised by changing the current UBACS collar shape to one that crosses over at the front. Should a zip be desired, it should be moved to one side of the midline to reduce rubbing on the chin and be covered with ballistic protective material. Additional semi-circles of silk beneath the collar at the front and back would improve protection without affecting comfort.

Human error and the search for blame

NASA Technical Reports Server (NTRS)

Denning, Peter J.

1989-01-01

Human error is a frequent topic in discussions about risks in using computer systems. A rational analysis of human error leads through the consideration of mistakes to standards that designers use to avoid mistakes that lead to known breakdowns. The irrational side, however, is more interesting. It conditions people to think that breakdowns are inherently wrong and that there is ultimately someone who is responsible. This leads to a search for someone to blame which diverts attention from: learning from the mistakes; seeing the limitations of current engineering methodology; and improving the discourse of design.

Synthesis: Intertwining product and process

NASA Technical Reports Server (NTRS)

Weiss, David M.

1990-01-01

Synthesis is a proposed systematic process for rapidly creating different members of a program family. Family members are described by variations in their requirements. Requirements variations are mapped to variations on a standard design to generate production quality code and documentation. The approach is made feasible by using principles underlying design for change. Synthesis incorporates ideas from rapid prototyping, application generators, and domain analysis. The goals of Synthesis and the Synthesis process are discussed. The technology needed and the feasibility of the approach are also briefly discussed. The status of current efforts to implement Synthesis methodologies is presented.

Project FIRES. Volume 1: Program Overview and Summary, Phase 1B

NASA Technical Reports Server (NTRS)

Abeles, F. J.

1980-01-01

Overall performance requirements and evaluation methods for firefighters protective equipment were established and published as the Protective Ensemble Performance Standards (PEPS). Current firefighters protective equipment was tested and evaluated against the PEPS requirements, and the preliminary design of a prototype protective ensemble was performed. In phase 1B, the design of the prototype ensemble was finalized. Prototype ensembles were fabricated and then subjected to a series of qualification tests which were based upon the PEPS requirements. Engineering drawings and purchase specifications were prepared for the new protective ensemble.

Framework for Designing The Assessment Models of Readiness SMEs to Adopt Indonesian National Standard (SNI), Case Study: SMEs Batik in Surakarta

NASA Astrophysics Data System (ADS)

Fahma, Fakhrina; Zakaria, Roni; Fajar Gumilang, Royan

2018-03-01

Since the ASEAN Economic Community (AEC) is released, the opportunity to expand market share has become very open, but the level of competition is also very high. Standardization is believed to be an important factor in seizing opportunities in the AEC’s era and other free trade agreements in the future. Standardization activities in industry can be proven by obtaining certification of SNI (Indonesian National Standard). This is a challenge for SMEs, considering that currently only 20% of SMEs had SNI certification both product and process. This research will be designed a model of readiness assessment to obtain SNI certification for SMEs. The stages of model development used an innovative approach by Roger (2003). Variables that affect the readiness of SMEs are obtained from product certification requirements established by BSN (National Standardization Agency) and LSPro (Certification body). This model will be used for mapping the readiness for SNI certification of SMEs’product. The level of readiness of SMEs is determined by the percentage of compliance with those requirements. Based on the result of this study, the five variables are determined as main aspects to assess SME readiness. For model validation, trials were conducted on Batik SMEs in Laweyan Surakarta.

Pelvic ring fractures: implications of vehicle design, crash type, and occupant characteristics.

PubMed

Rowe, Stephen A; Sochor, Mark S; Staples, Kurtis S; Wahl, Wendy L; Wang, Stewart C

2004-10-01

Pelvic ring fractures (PRFs) are a major cause of morbidity and mortality in motor vehicle collisions (MVCs). Understanding the factors leading to PRFs may help improve vehicle design and safety. This study sought to determine the vehicular, crash, and occupant characteristics that contribute to PRFs. From 1997 to 2003, 240 adult patients involved in lateral or frontal crashes were prospectively studied. Comprehensive crash reconstructions, vehicle analysis, and occupant data were compiled and analyzed as part of the national Crash Injury Research Engineering Network project. Of 240 study patients, 38 had PRFs. The incidence of PRFs was significantly associated with female gender, lateral impact crashes, vehicle incompatibility, and severity of crash. Seat belts and airbags were not protective against PRFs in either lateral or frontal crashes. All vehicles in the current study were less than 6 years old at the time of the MVC and thus reflect newer safety designs. Compared with studies of PRFs in MVCs before the widespread adoption of modern safety standards, our series suggests there has been a modest decrease in the incidence of PRFs in newer vehicles. Current safety standards do not adequately protect against PRFs, especially in lateral MVCs involving incompatibility and female occupants. New technology needs to be developed and implemented. Our data suggest that side impact airbags, alteration of vehicle geometry, and increased reinforcement of side panels and doors may result in fewer PRFs.

Risk Assessment Methodology Based on the NISTIR 7628 Guidelines

DOE Office of Scientific and Technical Information (OSTI.GOV)

Abercrombie, Robert K; Sheldon, Frederick T; Hauser, Katie R

2013-01-01

Earlier work describes computational models of critical infrastructure that allow an analyst to estimate the security of a system in terms of the impact of loss per stakeholder resulting from security breakdowns. Here, we consider how to identify, monitor and estimate risk impact and probability for different smart grid stakeholders. Our constructive method leverages currently available standards and defined failure scenarios. We utilize the National Institute of Standards and Technology (NIST) Interagency or Internal Reports (NISTIR) 7628 as a basis to apply Cyberspace Security Econometrics system (CSES) for comparing design principles and courses of action in making security-related decisions.

Archival-grade optical disc design and international standards

NASA Astrophysics Data System (ADS)

Fujii, Toru; Kojyo, Shinichi; Endo, Akihisa; Kodaira, Takuo; Mori, Fumi; Shimizu, Atsuo

2015-09-01

Optical discs currently on the market exhibit large variations in life span among discs, making them unsuitable for certain business applications. To assess and potentially mitigate this problem, we performed accelerated degradation testing under standard ISO conditions, determined the probable disc failure mechanisms, and identified the essential criteria necessary for a stable disc composition. With these criteria as necessary conditions, we analyzed the physical and chemical changes that occur in the disc components, on the basis of which we determined technological measures to reduce these degradation processes. By applying these measures to disc fabrication, we were able to develop highly stable optical discs.

Providing Pressurized Gasses to the International Space Station (ISS): Developing a Composite Overwrapped Pressure Vessel (COPV) for the Safe Transport of Oxygen and Nitrogen

NASA Technical Reports Server (NTRS)

Kezirian, Michael; Cook, Anthony; Dick, Brandon; Phoenix, S. Leigh

2012-01-01

To supply oxygen and nitrogen to the International Space Station, a COPV tank is being developed to meet requirements beyond that which have been flown. In order to "Ship Full' and support compatibility with a range of launch site operations, the vessel was designed for certification to International Standards (ISO) that have a different approach than current NASA certification approaches. These requirements were in addition to existing NASA certification standards had to be met. Initial risk-reduction development tests have been successful. Qualification is in progress.

Optical levitation of a mirror for reaching the standard quantum limit.

PubMed

Michimura, Yuta; Kuwahara, Yuya; Ushiba, Takafumi; Matsumoto, Nobuyuki; Ando, Masaki

2017-06-12

We propose a new method to optically levitate a macroscopic mirror with two vertical Fabry-Pérot cavities linearly aligned. This configuration gives the simplest possible optical levitation in which the number of laser beams used is the minimum of two. We demonstrate that reaching the standard quantum limit (SQL) of a displacement measurement with our system is feasible with current technology. The cavity geometry and the levitated mirror parameters are designed to ensure that the Brownian vibration of the mirror surface is smaller than the SQL. Our scheme provides a promising tool for testing macroscopic quantum mechanics.

Optical levitation of a mirror for reaching the standard quantum limit

NASA Astrophysics Data System (ADS)

Michimura, Yuta; Kuwahara, Yuya; Ushiba, Takafumi; Matsumoto, Nobuyuki; Ando, Masaki

2017-06-01

We propose a new method to optically levitate a macroscopic mirror with two vertical Fabry-P{\\'e}rot cavities linearly aligned. This configuration gives the simplest possible optical levitation in which the number of laser beams used is the minimum of two. We demonstrate that reaching the standard quantum limit (SQL) of a displacement measurement with our system is feasible with current technology. The cavity geometry and the levitated mirror parameters are designed to ensure that the Brownian vibration of the mirror surface is smaller than the SQL. Our scheme provides a promising tool for testing macroscopic quantum mechanics.

Evolving Our Evaluation of Luminous Environments

NASA Technical Reports Server (NTRS)

Clark, Toni

2016-01-01

The advance in solid state light emitting technologies and optics for lighting and visual communication necessitates the evaluation of how NASA envisions spacecraft lighting architectures and how NASA uses industry standards for the design and evaluation of lighting systems. Current NASA lighting standards and requirements for existing architectures focus on the separate ability of a lighting system to throw light against a surface or the ability of a display system to provide the appropriate visual contrast. This project investigated large luminous surface lamps as an alternative or supplement to overhead lighting. The efficiency of the technology was evaluated for uniformity and power consumption.

Automatic Implementation of Ttethernet-Based Time-Triggered Avionics Applications

NASA Astrophysics Data System (ADS)

Gorcitz, Raul Adrian; Carle, Thomas; Lesens, David; Monchaux, David; Potop-Butucaruy, Dumitru; Sorel, Yves

2015-09-01

The design of safety-critical embedded systems such as those used in avionics still involves largely manual phases. But in avionics the definition of standard interfaces embodied in standards such as ARINC 653 or TTEthernet should allow the definition of fully automatic code generation flows that reduce the costs while improving the quality of the generated code, much like compilers have done when replacing manual assembly coding. In this paper, we briefly present such a fully automatic implementation tool, called Lopht, for ARINC653-based time-triggered systems, and then explain how it is currently extended to include support for TTEthernet networks.

Proposal for a Standard Format for Neurophysiology Data Recording and Exchange.

PubMed

Stead, Matt; Halford, Jonathan J

2016-10-01

The lack of interoperability between information networks is a significant source of cost in health care. Standardized data formats decrease health care cost, improve quality of care, and facilitate biomedical research. There is no common standard digital format for storing clinical neurophysiologic data. This review proposes a new standard file format for neurophysiology data (the bulk of which is video-electroencephalographic data), entitled the Multiscale Electrophysiology Format, version 3 (MEF3), which is designed to address many of the shortcomings of existing formats. MEF3 provides functionality that addresses many of the limitations of current formats. The proposed improvements include (1) hierarchical file structure with improved organization; (2) greater extensibility for big data applications requiring a large number of channels, signal types, and parallel processing; (3) efficient and flexible lossy or lossless data compression; (4) industry standard multilayered data encryption and time obfuscation that permits sharing of human data without the need for deidentification procedures; (5) resistance to file corruption; (6) facilitation of online and offline review and analysis; and (7) provision of full open source documentation. At this time, there is no other neurophysiology format that supports all of these features. MEF3 is currently gaining industry and academic community support. The authors propose the use of the MEF3 as a standard format for neurophysiology recording and data exchange. Collaboration between industry, professional organizations, research communities, and independent standards organizations is needed to move the project forward.

Reading in NZ Schools: A Survey of Our Theory and Practice. Set Research Information for Teachers, Number Two, Item 2.

ERIC Educational Resources Information Center

Penton, John

Designed to provide information about reading in New Zealand, this report offers an overview of theory and practice in that area. Among the topics discussed are: the current concern about reading standards; developmental reading; effective methods of reading instruction; research into the nature of the reading process; preparation of teachers of…

Measuring Worker Turnover in Long-Term Care: Lessons from the Better Jobs Better Care Demonstration

ERIC Educational Resources Information Center

Piercy, Kathleen Walsh, Ed.; Barry, Theresa; Kemper, Peter; Brannon, S. Diane

2008-01-01

Purpose: Turnover among direct-care workers (DCWs) continues to be a challenge in long-term care. Both policy makers and provider organizations recognize this issue as a major concern and are designing efforts to reduce turnover among these workers. However, there is currently no standardized method of measuring turnover to define the scope of the…

Digging Up: A Five-Year Journey to Instructional-Design Stability in a Postsecondary Distance Education Unit

ERIC Educational Resources Information Center

Epp, Jordan; McKee, Jeanette

2015-01-01

This report of practice describes a five-year process to establish and implement quality standards for a substantial portfolio of distance delivered courses at the Centre for Continuing and Distance Education, University of Saskatchewan. The report describes an analysis of the issues and the solutions found that led to our current curriculum…

Word Saliency and Frequency of Academic Words in Textbooks: A Case Study in the "New Standard College English"

ERIC Educational Resources Information Center

Liqin, Yan; Xinlu, Gao

2014-01-01

Though textbooks are one of the main vocabulary input resources for domestic college students and core contents of learning and testing (Liu, 2013), few empirical studies are done to evaluate learning opportunities provided by textbooks. This empirical study is designed to analyze what learning opportunity is provided in a currently used series of…

Universal precautions: an update.

PubMed

Gershon, R R; Karkashian, C; Felknor, S

1994-01-01

Universal precautions, the set of work practice recommendations designed to help minimize occupational exposure to bloodborne pathogens, have been shown to be effective. However, lack of compliance with these recommendations has been well documented, both before and after the enactment of the OSHA Bloodborne Pathogens Standard. Current issues, including occupationally acquired human immunodeficiency virus, percutaneous exposures and lack of compliance are discussed in this article.

Innovation and Standardization in School Building: A Proposal for the National Code in Italy.

ERIC Educational Resources Information Center

Ridolfi, Giuseppe

This document discusses the University of Florence's experience and concepts as it developed the research to define a proposal for designing a new national school building code. Section 1 examines the current school building code and the Italian Reform Process in Education between 1960 and 2000. Section 2 details and explains the new school…

[Medical nutrition in Alzheimer's: the trials].

PubMed

Scheltens, Philip; Twisk, Jos W R

2013-01-01

We describe the small but statistically significant effects of the medical nutrition diet 'Souvenaid' on memory in early Alzheimer's disease in two published randomised clinical trials. We specifically discuss the design and statistical approach, which were predefined and meet current standards in the field. Further research is needed to substantiate the long term effects and learn more about the mode of action of Souvenaid.

Analysis of Reading Fluency and Comprehension Measures for Sixth Grade Students. Technical Report #24

ERIC Educational Resources Information Center

Alonzo, Julie; Tindal, Gerald

2004-01-01

The No Child Left Behind Act of 2001 has increased the importance of assessment in K-12 education. Designed to ensure that all students meet high academic standards, the law currently requires states receiving Title I funds to test all children annually in reading and math in grades 3 through 8 and report student performance disaggregated by…

EVA Health and Human Performance Benchmarking Study

NASA Technical Reports Server (NTRS)

Abercromby, A. F.; Norcross, J.; Jarvis, S. L.

2016-01-01

Multiple HRP Risks and Gaps require detailed characterization of human health and performance during exploration extravehicular activity (EVA) tasks; however, a rigorous and comprehensive methodology for characterizing and comparing the health and human performance implications of current and future EVA spacesuit designs does not exist. This study will identify and implement functional tasks and metrics, both objective and subjective, that are relevant to health and human performance, such as metabolic expenditure, suit fit, discomfort, suited postural stability, cognitive performance, and potentially biochemical responses for humans working inside different EVA suits doing functional tasks under the appropriate simulated reduced gravity environments. This study will provide health and human performance benchmark data for humans working in current EVA suits (EMU, Mark III, and Z2) as well as shirtsleeves using a standard set of tasks and metrics with quantified reliability. Results and methodologies developed during this test will provide benchmark data against which future EVA suits, and different suit configurations (eg, varied pressure, mass, CG) may be reliably compared in subsequent tests. Results will also inform fitness for duty standards as well as design requirements and operations concepts for future EVA suits and other exploration systems.

The implementation of tissue banking experiences for setting up a cGMP cell manufacturing facility.

PubMed

Arjmand, Babak; Emami-Razavi, Seyed Hassan; Larijani, Bagher; Norouzi-Javidan, Abbas; Aghayan, Hamid Reza

2012-12-01

Cell manufacturing for clinical applications is a unique form of biologics manufacturing that relies on maintenance of stringent work practices designed to ensure product consistency and prevent contamination by microorganisms or by another patient's cells. More extensive, prolonged laboratory processes involve greater risk of complications and possibly adverse events for the recipient, and so the need for control is correspondingly greater. To minimize the associate risks of cell manufacturing adhering to international quality standards is critical. Current good tissue practice (cGTP) and current good manufacturing practice (cGMP) are examples of general standards that draw a baseline for cell manufacturing facilities. In recent years, stem cell researches have found great public interest in Iran and different cell therapy projects have been started in country. In this review we described the role of our tissue banking experiences in establishing a new cGMP cell manufacturing facility. The authors concluded that, tissue banks and tissue banking experts can broaden their roles from preparing tissue grafts to manufacturing cell and tissue engineered products for translational researches and phase I clinical trials. Also they can collaborate with cell processing laboratories to develop SOPs, implement quality management system, and design cGMP facilities.

From the Margins to the Spotlight: Diverse Deaf and Hard of Hearing Student Populations and Standardized Assessment Accessibility.

PubMed

Cawthon, Stephanie

2015-01-01

Designing assessments and tests is one of the more challenging aspects of creating an accessible learning environment for students who are deaf or hard of hearing (DHH), particularly for deaf students with a disability (DWD). Standardized assessments are a key mechanism by which the educational system in the United States measures student progress, teacher effectiveness, and the impact of school reform. The diversity of student characteristics within DHH and DWD populations is only now becoming visible in the research literature relating to standardized assessments and their use in large-scale accountability reforms. The purpose of this article is to explore the theoretical frameworks surrounding assessment policy and practice, current research related to standardized assessment and students who are DHH and DWD, and potential implications for practice within both the assessment and instruction contexts.

Experimenting Design and Implementation of an Educational Services Management System Based on ISO/IEC 20000 Standard

NASA Astrophysics Data System (ADS)

Lezcano, Jean-Marc; Adachihara, Hatsuo; Prunier, Marc

European higher education organizations are encouraged to implement quality management practices. Existing quality standards and frameworks do not capitalize an important set of best practices addressing educational services delivery. The ISO/IEC 20000 standard, elaborated from IT service management issues, is widening its field of application and may represent an interesting alternative. A specific approach is needed to apprehend the particular nature of educational services, consider the systemic cooperating roles of educational system and learning system, and define ISO/IEC 20000 vocabulary and concepts adapted to the domain. ISO/IEC 20000 may provide an answer to European Standard Guideline compliance and improve educational services management. The current experimentation is expected to cast light on the complexity, practicality and effectiveness of the use of ISO/IEC 20000 in a first field of "non IT" services.

Radiation Environment Modeling for Spacecraft Design: New Model Developments

NASA Technical Reports Server (NTRS)

Barth, Janet; Xapsos, Mike; Lauenstein, Jean-Marie; Ladbury, Ray

2006-01-01

A viewgraph presentation on various new space radiation environment models for spacecraft design is described. The topics include: 1) The Space Radiatio Environment; 2) Effects of Space Environments on Systems; 3) Space Radiatio Environment Model Use During Space Mission Development and Operations; 4) Space Radiation Hazards for Humans; 5) "Standard" Space Radiation Environment Models; 6) Concerns about Standard Models; 7) Inadequacies of Current Models; 8) Development of New Models; 9) New Model Developments: Proton Belt Models; 10) Coverage of New Proton Models; 11) Comparison of TPM-1, PSB97, AP-8; 12) New Model Developments: Electron Belt Models; 13) Coverage of New Electron Models; 14) Comparison of "Worst Case" POLE, CRESELE, and FLUMIC Models with the AE-8 Model; 15) New Model Developments: Galactic Cosmic Ray Model; 16) Comparison of NASA, MSU, CIT Models with ACE Instrument Data; 17) New Model Developmemts: Solar Proton Model; 18) Comparison of ESP, JPL91, KIng/Stassinopoulos, and PSYCHIC Models; 19) New Model Developments: Solar Heavy Ion Model; 20) Comparison of CREME96 to CREDO Measurements During 2000 and 2002; 21) PSYCHIC Heavy ion Model; 22) Model Standardization; 23) Working Group Meeting on New Standard Radiation Belt and Space Plasma Models; and 24) Summary.

Analysis of view synthesis prediction architectures in modern coding standards

NASA Astrophysics Data System (ADS)

Tian, Dong; Zou, Feng; Lee, Chris; Vetro, Anthony; Sun, Huifang

2013-09-01

Depth-based 3D formats are currently being developed as extensions to both AVC and HEVC standards. The availability of depth information facilitates the generation of intermediate views for advanced 3D applications and displays, and also enables more efficient coding of the multiview input data through view synthesis prediction techniques. This paper outlines several approaches that have been explored to realize view synthesis prediction in modern video coding standards such as AVC and HEVC. The benefits and drawbacks of various architectures are analyzed in terms of performance, complexity, and other design considerations. It is hence concluded that block-based VSP prediction for multiview video signals provides attractive coding gains with comparable complexity as traditional motion/disparity compensation.

Mobius Assembly: A versatile Golden-Gate framework towards universal DNA assembly

PubMed Central

Andreou, Andreas I.

2018-01-01

Synthetic biology builds upon the foundation of engineering principles, prompting innovation and improvement in biotechnology via a design-build-test-learn cycle. A community-wide standard in DNA assembly would enable bio-molecular engineering at the levels of predictivity and universality in design and construction that are comparable to other engineering fields. Golden Gate Assembly technology, with its robust capability to unidirectionally assemble numerous DNA fragments in a one-tube reaction, has the potential to deliver a universal standard framework for DNA assembly. While current Golden Gate Assembly frameworks (e.g. MoClo and Golden Braid) render either high cloning capacity or vector toolkit simplicity, the technology can be made more versatile—simple, streamlined, and cost/labor-efficient, without compromising capacity. Here we report the development of a new Golden Gate Assembly framework named Mobius Assembly, which combines vector toolkit simplicity with high cloning capacity. It is based on a two-level, hierarchical approach and utilizes a low-frequency cutter to reduce domestication requirements. Mobius Assembly embraces the standard overhang designs designated by MoClo, Golden Braid, and Phytobricks and is largely compatible with already available Golden Gate part libraries. In addition, dropout cassettes encoding chromogenic proteins were implemented for cost-free visible cloning screening that color-code different cloning levels. As proofs of concept, we have successfully assembled up to 16 transcriptional units of various pigmentation genes in both operon and multigene arrangements. Taken together, Mobius Assembly delivers enhanced versatility and efficiency in DNA assembly, facilitating improved standardization and automation. PMID:29293531

Design and Rationale of a Comparative Effectiveness Study to Evaluate Two Acupuncture Methods for the Treatment of Headaches Associated with Traumatic Brain Injury

PubMed Central

Lee, Courtney; Wallerstedt, Dawn; Duncan, Alaine; York, Alexandra; Hollifield, Michael; Niemtzow, Richard C.; Burns, Stephen M.

2011-01-01

Abstract Background Exposure to deployment and battle can induce a constellation of physical, cognitive, psychological, and behavioral symptoms, also referred to as war-related Trauma Spectrum Response (wrTSR). One prevalent cause of this response is traumatic brain injury (TBI) and its ensuing sequelae, such as pain and suffering caused by post-traumatic headache. Current pharmacologic treatment of these headaches is often inadequate and complicated by the multi-component nature of wrTSR. Acupuncture has been found to reduce pain, improve health-related quality of life, prevent migraine headaches, and reduce tension-type and chronic daily headaches. Objective An ongoing study is endeavoring to advance understanding of the speed and depth of healing induced by two acupuncture approaches, compared to current standard practice and with the aim of providing insights to guide future implementation of acupuncture treatment in the military. Design A comparative effectiveness study protocol will be used to determine if auricular acupuncture (AA) or semi-standardized traditional Chinese acupuncture (TCA) alleviates headaches and reduces associated comorbidities more effectively than usual care alone in a cohort of active duty military personnel with mild-to-moderate TBI. Summary Given that the study is currently underway, no results or conclusions can be reported at present. While current evidence from acupuncture research demonstrates its promising healing impact across the wrTSR, a number of unanswered questions and information gaps remain. It is hoped that the proposed study will address some of these questions and gaps.

Applying Registry Services to Spaceflight Technologies to Aid in the Assignment of Assigned Numbers to Disparate Systems and Their Technologies to Further Enable Interoperability

NASA Technical Reports Server (NTRS)

Bradford, Robert N.; Nichols, Kelvin F.

2006-01-01

To date very little effort has been made to provide interoperability between various space agency projects. To effectively get to the Moon and beyond systems must interoperate. To provide interoperability, standardization and registries of various technologies will be required. These registries will be created as they relate to space flight. With the new NASA Moon/Mars initiative a requirement to standardize and control the naming conventions of very disparate systems and technologies are emerging. The need to provide numbering to the many processes, schemas, vehicles, robots, space suits and technologies (e.g. versions), to name a few, in the highly complex Constellation Initiative is imperative. The number of corporations, developer personnel, system interfaces, people interfaces will require standardization and registries on a scale not currently envisioned. It would only take one exception (stove piped system development) to weaken, if not, destroy interoperability. To start, a standardized registry process must be defined that allows many differing engineers, organizations and operators the ability to easily access disparate registry information across numerous technological and scientific disciplines. Once registries are standardized the need to provide registry support in terms of setup and operations, resolution of conflicts between registries and other issues will need to be addressed. Registries should not be confused with repositories. No end user data is "stored" in a registry nor is it a configuration control system. Once a registry standard is created and approved, the technologies that should be registered must be identified and prioritized. In this paper, we will identify and define a registry process that is compatible with the Constellation Initiative and other non related space activities and organizations. We will then identify and define the various technologies that should use a registry to provide interoperability. The first set of technologies will be those that are currently in need of expansion namely the assignment of satellite designations and the process which controls assignments. Second, we will analyze the technologies currently standardized under the Consultative Committee for Space Data Systems (CCSDS) banner. Third, we will analyze the current CCSDS working group and birds of a feather activities to ascertain registry requirements. Lastly, we will identify technologies that are either currently under the auspices of another

Designing an evaluation framework for WFME basic standards for medical education.

PubMed

Tackett, Sean; Grant, Janet; Mmari, Kristin

2016-01-01

To create an evaluation plan for the World Federation for Medical Education (WFME) accreditation standards for basic medical education. We conceptualized the 100 basic standards from "Basic Medical Education: WFME Global Standards for Quality Improvement: The 2012 Revision" as medical education program objectives. Standards were simplified into evaluable items, which were then categorized as inputs, processes, outputs and/or outcomes to generate a logic model and corresponding plan for data collection. WFME standards posed significant challenges to evaluation due to complex wording, inconsistent formatting and lack of existing assessment tools. Our resulting logic model contained 244 items. Standard B 5.1.1 separated into 24 items, the most for any single standard. A large proportion of items (40%) required evaluation of more than one input, process, output and/or outcome. Only one standard (B 3.2.2) was interpreted as requiring evaluation of a program outcome. Current WFME standards are difficult to use for evaluation planning. Our analysis may guide adaptation and revision of standards to make them more evaluable. Our logic model and data collection plan may be useful to medical schools planning an institutional self-review and to accrediting authorities wanting to provide guidance to schools under their purview.

Standardization of shape memory alloy test methods toward certification of aerospace applications

NASA Astrophysics Data System (ADS)

Hartl, D. J.; Mabe, J. H.; Benafan, O.; Coda, A.; Conduit, B.; Padan, R.; Van Doren, B.

2015-08-01

The response of shape memory alloy (SMA) components employed as actuators has enabled a number of adaptable aero-structural solutions. However, there are currently no industry or government-accepted standardized test methods for SMA materials when used as actuators and their transition to commercialization and production has been hindered. This brief fast track communication introduces to the community a recently initiated collaborative and pre-competitive SMA specification and standardization effort that is expected to deliver the first ever regulatory agency-accepted material specification and test standards for SMA as employed as actuators for commercial and military aviation applications. In the first phase of this effort, described herein, the team is working to review past efforts and deliver a set of agreed-upon properties to be included in future material certification specifications as well as the associated experiments needed to obtain them in a consistent manner. Essential for the success of this project is the participation and input from a number of organizations and individuals, including engineers and designers working in materials and processing development, application design, SMA component fabrication, and testing at the material, component, and system level. Going forward, strong consensus among this diverse body of participants and the SMA research community at large is needed to advance standardization concepts for universal adoption by the greater aerospace community and especially regulatory bodies. It is expected that the development and release of public standards will be done in collaboration with an established standards development organization.

A new code for Galileo

NASA Technical Reports Server (NTRS)

Dolinar, S.

1988-01-01

Over the past six to eight years, an extensive research effort was conducted to investigate advanced coding techniques which promised to yield more coding gain than is available with current NASA standard codes. The delay in Galileo's launch due to the temporary suspension of the shuttle program provided the Galileo project with an opportunity to evaluate the possibility of including some version of the advanced codes as a mission enhancement option. A study was initiated last summer to determine if substantial coding gain was feasible for Galileo and, is so, to recommend a suitable experimental code for use as a switchable alternative to the current NASA-standard code. The Galileo experimental code study resulted in the selection of a code with constant length 15 and rate 1/4. The code parameters were chosen to optimize performance within cost and risk constraints consistent with retrofitting the new code into the existing Galileo system design and launch schedule. The particular code was recommended after a very limited search among good codes with the chosen parameters. It will theoretically yield about 1.5 dB enhancement under idealizing assumptions relative to the current NASA-standard code at Galileo's desired bit error rates. This ideal predicted gain includes enough cushion to meet the project's target of at least 1 dB enhancement under real, non-ideal conditions.

The development of professional practice standards for Australian general practice nurses.

PubMed

Halcomb, Elizabeth; Stephens, Moira; Bryce, Julianne; Foley, Elizabeth; Ashley, Christine

2017-08-01

The aim of this study was to explore the current role of general practice nurses and the scope of nursing practice to inform the development of national professional practice standards for Australian general practice nurses. Increasing numbers of nurses have been employed in Australian general practice to meet the growing demand for primary care services. This has brought significant changes to the nursing role. Competency standards for nurses working in general practice were first developed in Australia in 2005, but limited attention has been placed on articulating the contemporary scope of practice for nurses in this setting. Concurrent mixed methods design. Data collection was conducted during 2013-2014 and involved two online surveys of Registered and Enrolled Nurses currently working in general practice, a series of 14 focus groups across Australia and a series of consultations with key experts. Data collection enabled the development of 22 Practice Standards separated into four domains: (i) Professional Practice; (ii) Nursing Care; (iii) General Practice Environment and (iv) Collaborative Practice. To differentiate the variations in enacting these Standards, performance indicators for the Enrolled Nurse, Registered Nurse and Registered Nurse Advanced Practice are provided under each Standard. The development of national professional practice standards for nurses working in Australian general practice will support ongoing workforce development. These Standards are also an important means of articulating the role and scope of the nurses' practice for both consumers and other health professionals, as well as being a guide for curriculum development and measurement of performance. © 2017 John Wiley & Sons Ltd.

User's manual for rocket combustor interactive design (ROCCID) and analysis computer program. Volume 1: User's manual

NASA Technical Reports Server (NTRS)

Muss, J. A.; Nguyen, T. V.; Johnson, C. W.

1991-01-01

The user's manual for the rocket combustor interactive design (ROCCID) computer program is presented. The program, written in Fortran 77, provides a standardized methodology using state of the art codes and procedures for the analysis of a liquid rocket engine combustor's steady state combustion performance and combustion stability. The ROCCID is currently capable of analyzing mixed element injector patterns containing impinging like doublet or unlike triplet, showerhead, shear coaxial, and swirl coaxial elements as long as only one element type exists in each injector core, baffle, or barrier zone. Real propellant properties of oxygen, hydrogen, methane, propane, and RP-1 are included in ROCCID. The properties of other propellants can easily be added. The analysis model in ROCCID can account for the influence of acoustic cavities, helmholtz resonators, and radial thrust chamber baffles on combustion stability. ROCCID also contains the logic to interactively create a combustor design which meets input performance and stability goals. A preliminary design results from the application of historical correlations to the input design requirements. The steady state performance and combustion stability of this design is evaluated using the analysis models, and ROCCID guides the user as to the design changes required to satisfy the user's performance and stability goals, including the design of stability aids. Output from ROCCID includes a formatted input file for the standardized JANNAF engine performance prediction procedure.

Grounding and lightning protection. Volume 5

DOE Office of Scientific and Technical Information (OSTI.GOV)

Robinson, M.D.

1987-12-31

Grounding systems protect personnel and equipment by isolating faulted systems and dissipating transient currents. Lightning protection systems minimize the possible consequences of a direct strike by lightning. This volume focuses on design requirements of the grounding system and on present-day concepts used in the design of lightning protection systems. Various types of grounding designs are presented, and their advantages and disadvantages discussed. Safety, of course, is the primary concern of any grounding system. Methods are shown for grounding the non-current-carrying parts of electrical equipment to reduce shock hazards to personnel. Lightning protection systems are installed on tall structures (such asmore » chimneys and cooling towers) to minimize the possibility of structural damage caused by direct lightning strokes. These strokes may carry currents of 200,000 A or more. The volume examines the formation and characteristics of lightning strokes and the way stroke characteristics influence the design of lightning protection systems. Because a large portion of the grounding system is buried in soil or concrete, it is not readily accessible for inspection or repair after its installation. The volume details the careful selection and sizing of materials needed to ensure a long, maintenance-free life for the system. Industry standards and procedures for testing the adequacy of the grounding system are also discussed.« less

Standardized Radiation Shield Design Methods: 2005 HZETRN

NASA Technical Reports Server (NTRS)

Wilson, John W.; Tripathi, Ram K.; Badavi, Francis F.; Cucinotta, Francis A.

2006-01-01

Research committed by the Langley Research Center through 1995 resulting in the HZETRN code provides the current basis for shield design methods according to NASA STD-3000 (2005). With this new prominence, the database, basic numerical procedures, and algorithms are being re-examined with new methods of verification and validation being implemented to capture a well defined algorithm for engineering design processes to be used in this early development phase of the Bush initiative. This process provides the methodology to transform the 1995 HZETRN research code into the 2005 HZETRN engineering code to be available for these early design processes. In this paper, we will review the basic derivations including new corrections to the codes to insure improved numerical stability and provide benchmarks for code verification.

Toward Engineering Synthetic Microbial Metabolism

PubMed Central

McArthur, George H.; Fong, Stephen S.

2010-01-01

The generation of well-characterized parts and the formulation of biological design principles in synthetic biology are laying the foundation for more complex and advanced microbial metabolic engineering. Improvements in de novo DNA synthesis and codon-optimization alone are already contributing to the manufacturing of pathway enzymes with improved or novel function. Further development of analytical and computer-aided design tools should accelerate the forward engineering of precisely regulated synthetic pathways by providing a standard framework for the predictable design of biological systems from well-characterized parts. In this review we discuss the current state of synthetic biology within a four-stage framework (design, modeling, synthesis, analysis) and highlight areas requiring further advancement to facilitate true engineering of synthetic microbial metabolism. PMID:20037734

How to design low-noise burners

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sams, G.; Jordan, J.

1996-12-01

Frequently, natural draft burner designs used in indirect heaters fail to meet the low noise standard of 85 to 88 dBA three feet from the flame arrestor. Noise encountered with indirect burner designs has been shown to be related to nozzle and firetube gas velocities. Testing shows that when the nozzle velocity is sufficiently greater than the firetube velocity, the low-frequency rumble that accompanies current designs ceases. Data obtained from field testing was used to construct a relationship between burner noise level and gas volume expansion ratio, burner air-to-fuel ratio, mixture flowrate, orifice velocity, burner area, and the number ofmore » burners. The noise from a burner can be predicted if the above easily calculable variables are known.« less

Suborbital Safety Technical Committee- Summary of Proposed Standards & Guidelines

NASA Astrophysics Data System (ADS)

Quinn, Andy; Atencia Yepez, Amaya; Klicker, Michael; Howard, Diane; Verstraeten, Joram; Other Suborbital Safety TC Members

2013-09-01

There are currently no international safety standards and guidelines to assist designers, operators and authorities in the suborbital domain. There is a launch licensing regime in the United States (US) to assist the forerunners of the suborbital domain however this does not provide a safety approval for the vehicle against set standards or does not have an acceptable level of safety to achieve in terms of design or operation. In Europe a certification framework may be implemented however this (or any regulatory framework) is not in place as yet. This paper summarises the 5 tasks thus far completed by the International Association for the Advancement of Space Safety (IAASS) Suborbital Safety Technical Committee (SS TC) in terms of deriving standards and guidelines for the suborbital domain. The SS TC comprises members from the suborbital industry (US and European vehicle designers), safety experts, legal experts, medical/training experts, prospective spaceport operators and members from the US and European authorities (though these members cannot directly steer the standards and guidelines - they can merely review them for interest and comment on non-policy aspects). The SS TC has been divided into three working groups (WG): Regulatory WG, Technical WG and Operations WG. The 5 tasks that are summarised in this paper include: Regulatory WG - (Task 1) Clarify and promote regulatory framework for suborbital flights (including discussions on Space Law 'v' Air Law for suborbital domain); Technical WG - (Task 1) Defining & Alignment (globally) of Safety Criteria for Suborbital domain using industry best practices, (Task 2) Software/complex hardware certification for suborbital flights; Operations WG - (Task 1) Flight Crew and Spaceflight Participant Medical and Training Standards & Guidelines for suborbital flight, (Task 2) Spaceport Safety Management System. This paper also details the next set of standards and guidelines that will be derived by the SS TC. The paper concludes that these and future IAASS suborbital safety standards and guidelines are needed now and should beconsidered by the industry players before the first commercial flights expected late 2013/early 2014.

Performance of a Dual Anode Nickel-Hydrogen Cell

NASA Technical Reports Server (NTRS)

Gahn, Randall F.

1991-01-01

Nickel-hydrogen batteries are presently being used for energy storage on satellites in low Earth orbit and in geosynchronous orbit, and have also been selected for use on the proposed Space Station Freedom. Development continues on the cell technology in order to improve the specific energy and lengthen the cycle life. An experimental study was conducted to compare the voltage performance of a nickel-hydrogen cell containing a dual anode with the standard cell design which uses a single hydrogen electrode. Since the principle voltage loss in a nickel-hydrogen cell is attributed to the mass transport and resistive polarization parameters of the nickel electrode, addition of a hydrogen electrode on the other side of the nickel electrode should reduce the electrochemical polarizations by a factor of two. A 3.5 in. diameter boilerplate cell with a single 30 mils thick nickel electrode was cycled under various current conditions to evaluate its performance with a single anode and then with a double anode. A layered separator consisting of one Zircar cloth separator and one radiation-grafted polyethylene separator were used between the electrodes. The electrolyte was 26% KOH, and the tests were done at room temperature. The discharge voltage characteristics were determined as a function of current and depth-of-discharge. At the 4C discharge rate and 50% DOD, the voltage of the dual anode cell was 100 mV higher than the single anode cell. At 75% DOD the dual anode cell voltage was about 130 mV higher than the standard cell design. Resistances of the two c ell designs obtained from the slope of the mid-discharge voltages plotted against various currents indicated that the dual anode cell resistance was one-half of the state-of-the-art cell.

Combinatorial electrochemical cell array for high throughput screening of micro-fuel-cells and metal/air batteries.

PubMed

Jiang, Rongzhong

2007-07-01

An electrochemical cell array was designed that contains a common air electrode and 16 microanodes for high throughput screening of both fuel cells (based on polymer electrolyte membrane) and metal/air batteries (based on liquid electrolyte). Electrode materials can easily be coated on the anodes of the electrochemical cell array and screened by switching a graphite probe from one cell to the others. The electrochemical cell array was used to study direct methanol fuel cells (DMFCs), including high throughput screening of electrode catalysts and determination of optimum operating conditions. For screening of DMFCs, there is about 6% relative standard deviation (percentage of standard deviation versus mean value) for discharge current from 10 to 20 mAcm(2). The electrochemical cell array was also used to study tin/air batteries. The effect of Cu content in the anode electrode on the discharge performance of the tin/air battery was investigated. The relative standard deviations for screening of metal/air battery (based on zinc/air) are 2.4%, 3.6%, and 5.1% for discharge current at 50, 100, and 150 mAcm(2), respectively.

Quality specifications in postgraduate medical e-learning: an integrative literature review leading to a postgraduate medical e-learning model.

PubMed

De Leeuw, R A; Westerman, Michiel; Nelson, E; Ket, J C F; Scheele, F

2016-07-08

E-learning is driving major shifts in medical education. Prioritizing learning theories and quality models improves the success of e-learning programs. Although many e-learning quality standards are available, few are focused on postgraduate medical education. We conducted an integrative review of the current postgraduate medical e-learning literature to identify quality specifications. The literature was thematically organized into a working model. Unique quality specifications (n = 72) were consolidated and re-organized into a six-domain model that we called the Postgraduate Medical E-learning Model (Postgraduate ME Model). This model was partially based on the ISO-19796 standard, and drew on cognitive load multimedia principles. The domains of the model are preparation, software design and system specifications, communication, content, assessment, and maintenance. This review clarified the current state of postgraduate medical e-learning standards and specifications. It also synthesized these specifications into a single working model. To validate our findings, the next-steps include testing the Postgraduate ME Model in controlled e-learning settings.

Alternative Formats to Achieve More Efficient Energy Codes for Commercial Buildings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Conover, David R.; Rosenberg, Michael I.; Halverson, Mark A.

2013-01-26

This paper identifies and examines several formats or structures that could be used to create the next generation of more efficient energy codes and standards for commercial buildings. Pacific Northwest National Laboratory (PNNL) is funded by the U.S. Department of Energy’s Building Energy Codes Program (BECP) to provide technical support to the development of ANSI/ASHRAE/IES Standard 90.1. While the majority of PNNL’s ASHRAE Standard 90.1 support focuses on developing and evaluating new requirements, a portion of its work involves consideration of the format of energy standards. In its current working plan, the ASHRAE 90.1 committee has approved an energy goalmore » of 50% improvement in Standard 90.1-2013 relative to Standard 90.1-2004, and will likely be considering higher improvement targets for future versions of the standard. To cost-effectively achieve the 50% goal in manner that can gain stakeholder consensus, formats other than prescriptive must be considered. Alternative formats that include reducing the reliance on prescriptive requirements may make it easier to achieve these aggressive efficiency levels in new codes and standards. The focus on energy code and standard formats is meant to explore approaches to presenting the criteria that will foster compliance, enhance verification, and stimulate innovation while saving energy in buildings. New formats may also make it easier for building designers and owners to design and build the levels of efficiency called for in the new codes and standards. This paper examines a number of potential formats and structures, including prescriptive, performance-based (with sub-formats of performance equivalency and performance targets), capacity constraint-based, and outcome-based. The paper also discusses the pros and cons of each format from the viewpoint of code users and of code enforcers.« less

Pulse generator with intermediate inductive storage as a lightning simulator

NASA Astrophysics Data System (ADS)

Kovalchuk, B. M.; Kharlov, A. V.; Zherlytsyn, A. A.; Kumpyak, E. V.; Tsoy, N. V.

2016-06-01

Compact transportable generators are required for simulating a lightning current pulse for electrical apparatus testing. A bi-exponential current pulse has to be formed by such a generator (with a current rise time of about two orders of magnitude faster than the damping time). The objective of this study was to develop and investigate a compact pulse generator with intermediate inductive storage and a fuse opening switch as a simulator of lightning discharge. A Marx generator (six stages) with a capacitance of 1 μF and an output voltage of 240 kV was employed as primary storage. In each of the stages, two IK-50/3 (50 kV, 3 μF) capacitors are connected in parallel. The generator inductance is 2 μH. A test bed for the investigations was assembled with this generator. The generator operates without SF6 and without oil in atmospheric air, which is very important in practice. Straight copper wires with adjustable lengths and diameters were used for the electro-explosive opening switch. Tests were made with active-inductive loads (up to 0.1 Ω and up to 6.3 μH). The current rise time is lower than 1200 ns, and the damping time can be varied from 35 to 125 μs, following the definition of standard lightning current pulse in the IEC standard. Moreover, 1D MHD calculations of the fuse explosion were carried out self-consistently with the electric circuit equations, in order to calculate more accurately the load pulse parameters. The calculations agree fairly well with the tests. On the basis of the obtained results, the design of a transportable generator was developed for a lightning simulator with current of 50 kA and a pulse shape corresponding to the IEEE standard.

Extending and expanding the life of older current meters

USGS Publications Warehouse

Strahle, W.J.; Martini, Marinna A.

1995-01-01

The EG&G Model 610 VACM and Model 630 VMCM are standards for ocean current measurements. It is simple to add peripheral sensors to the data stream of the VACM by use of add-on CMOS circuitry. The firmware control of the VMCM makes it virtually impossible to add sampling of additional sensors. Most of the electronic components used in the VACM are obsolete or difficult to replace and the VMCM will soon follow suit. As a result, the USGS joined WHOI in the development of a PCMCIA data storage system to replace the cassette recording system in the VACM. Using the same PCMCIA recording package as the controller and recorder for the VMCM, a user-friendly VMCM is being designed. PCMCIA cards are rapidly becoming an industry standard with a wide range of storage capacities. By upgrading the VACM and VMCM to PCMCIA storage systems with a flexible microprocessor, they will continue to be viable instruments.

Wake Vortex Advisory System (WakeVAS) Concept of Operations

NASA Technical Reports Server (NTRS)

Rutishauser, David; Lohr, Gary; Hamilton, David; Powers, Robert; McKissick, Burnell; Adams, Catherine; Norris, Edward

2003-01-01

NASA Langley Research Center has a long history of aircraft wake vortex research, with the most recent accomplishment of demonstrating the Aircraft VOrtex Spacing System (AVOSS) at Dallas/Forth Worth International Airport in July 2000. The AVOSS was a concept for an integration of technologies applied to providing dynamic wake-safe reduced spacing for single runway arrivals, as compared to current separation standards applied during instrument approaches. AVOSS included state-of-the-art weather sensors, wake sensors, and a wake behavior prediction algorithm. Using real-time data AVOSS averaged a 6% potential throughput increase over current standards. This report describes a Concept of Operations for applying the technologies demonstrated in the AVOSS to a variety of terminal operations to mitigate wake vortex capacity constraints. A discussion of the technological issues and open research questions that must be addressed to design a Wake Vortex Advisory System (WakeVAS) is included.

Robotic surgical systems in maxillofacial surgery: a review

PubMed Central

Liu, Hang-Hang; Li, Long-Jiang; Shi, Bin; Xu, Chun-Wei; Luo, En

2017-01-01

Throughout the twenty-first century, robotic surgery has been used in multiple oral surgical procedures for the treatment of head and neck tumors and non-malignant diseases. With the assistance of robotic surgical systems, maxillofacial surgery is performed with less blood loss, fewer complications, shorter hospitalization and better cosmetic results than standard open surgery. However, the application of robotic surgery techniques to the treatment of head and neck diseases remains in an experimental stage, and the long-lasting effects on surgical morbidity, oncologic control and quality of life are yet to be established. More well-designed studies are needed before this approach can be recommended as a standard treatment paradigm. Nonetheless, robotic surgical systems will inevitably be extended to maxillofacial surgery. This article reviews the current clinical applications of robotic surgery in the head and neck region and highlights the benefits and limitations of current robotic surgical systems. PMID:28660906

Application of HEC-RAS for flood forecasting in perched river-A case study of hilly region, China

NASA Astrophysics Data System (ADS)

Sun, Pingping; Wang, Shuqian; Gan, Hong; Liu, Bin; Jia, Ling

2017-04-01

Flooding in small and medium rivers are seriously threatening the safety of human beings’ life and property. The simulation forecasting of the river flood and bank risk in hilly region has gradually become a hotspot. At present, there are few studies on the simulation of hilly perched river, especially in the case of lacking section flow data. And the method of how to determine the position of the levee breach along the river bank is not much enough. Based on the characteristics of the sections in hilly perched river, an attempt is applied in this paper which establishes the correlation between the flow profile computed by HEC-RAS model and the river bank. A hilly perched river in Lingshi County, Shanxi Province of China, is taken as the study object, the levee breach positions along the bank are simulated under four different design storm. The results show that the flood control standard of upper reach is high, which can withstand the design storm of 100 years. The current standard of lower reach is low, which is the flooding channel with high frequency. As the standard of current channel between the 2rd and the 11th section is low, levee along that channel of the river bank is considered to be heighten and reinforced. The study results can provide some technical support for flood proofing in hilly region and some reference for the reinforcement of river bank.

An Unfulfilled Promise: Changes Needed to the Drug Approval Process to Make Personalized Medicine a Reality.

PubMed

Riley, Margaret Foster

2015-01-01

The widespread availability of drugs for personalized medicine has been an aspiration since before the human genome was sequenced. Recently, there is renewed interest; personalized medicine is much in the news. Legislation has been considered with the goal of smoothing, shortening and incentivizing the approval process for therapeutic products. President Obama mentioned the need for new initiatives to achieve such goals in the State of the Union address. But most of these initiatives do not consider the fundamental changes that personalized medicine demands. It requires a statutory structure designed for the development of products applicable for small subpopulations that is very different from our current model which is designed for the development of products for large populations. The current approval process is purposely not designed to consider individual efficacy. It is designed to incentivize reduced variation in clinical trials rather than embracing variation. In addition, it is based on twentieth-century notions of disease focused on phenotype rather than on pathophysiologic pathways. Current foci on the development of companion diagnostics, orphan drugs and post-approval study are important but insufficient. FDA does not have the authority to require the type of standardization, clinical trial design and extensive data reporting and sharing that. is needed to achieve the goals for personalized medicine. In addition, FDA's current drug approval process is too lengthy and cumbersome to deal with the iterative responses personalized medicine entails. If we are serious about wanting to achieve these goals, we will need to entertain such fundamental changes in authority.

The medium is NOT the message or Indefinitely long-term file storage at Leeds University

NASA Technical Reports Server (NTRS)

Holdsworth, David

1996-01-01

Approximately 3 years ago we implemented an archive file storage system which embodies experiences gained over more than 25 years of using and writing file storage systems. It is the third in-house system that we have written, and all three systems have been adopted by other institutions. This paper discusses the requirements for long-term data storage in a university environment, and describes how our present system is designed to meet these requirements indefinitely. Particular emphasis is laid on experiences from past systems, and their influence on current system design. We also look at the influence of the IEEE-MSS standard. We currently have the system operating in five UK universities. The system operates in a multi-server environment, and is currently operational with UNIX (SunOS4, Solaris2, SGI-IRIX, HP-UX), NetWare3 and NetWare4. PCs logged on to NetWare can also archive and recover files that live on their hard disks.

Computational design optimization for microfluidic magnetophoresis

PubMed Central

Plouffe, Brian D.; Lewis, Laura H.; Murthy, Shashi K.

2011-01-01

Current macro- and microfluidic approaches for the isolation of mammalian cells are limited in both efficiency and purity. In order to design a robust platform for the enumeration of a target cell population, high collection efficiencies are required. Additionally, the ability to isolate pure populations with minimal biological perturbation and efficient off-chip recovery will enable subcellular analyses of these cells for applications in personalized medicine. Here, a rational design approach for a simple and efficient device that isolates target cell populations via magnetic tagging is presented. In this work, two magnetophoretic microfluidic device designs are described, with optimized dimensions and operating conditions determined from a force balance equation that considers two dominant and opposing driving forces exerted on a magnetic-particle-tagged cell, namely, magnetic and viscous drag. Quantitative design criteria for an electromagnetic field displacement-based approach are presented, wherein target cells labeled with commercial magnetic microparticles flowing in a central sample stream are shifted laterally into a collection stream. Furthermore, the final device design is constrained to fit on standard rectangular glass coverslip (60 (L)×24 (W)×0.15 (H) mm3) to accommodate small sample volume and point-of-care design considerations. The anticipated performance of the device is examined via a parametric analysis of several key variables within the model. It is observed that minimal currents (<500 mA) are required to generate magnetic fields sufficient to separate cells from the sample streams flowing at rate as high as 7 ml∕h, comparable to the performance of current state-of-the-art magnet-activated cell sorting systems currently used in clinical settings. Experimental validation of the presented model illustrates that a device designed according to the derived rational optimization can effectively isolate (∼100%) a magnetic-particle-tagged cell population from a homogeneous suspension even in a low abundance. Overall, this design analysis provides a rational basis to select the operating conditions, including chamber and wire geometry, flow rates, and applied currents, for a magnetic-microfluidic cell separation device. PMID:21526007

The Design of a Templated C++ Small Vector Class for Numerical Computing

NASA Technical Reports Server (NTRS)

Moran, Patrick J.

2000-01-01

We describe the design and implementation of a templated C++ class for vectors. The vector class is templated both for vector length and vector component type; the vector length is fixed at template instantiation time. The vector implementation is such that for a vector of N components of type T, the total number of bytes required by the vector is equal to N * size of (T), where size of is the built-in C operator. The property of having a size no bigger than that required by the components themselves is key in many numerical computing applications, where one may allocate very large arrays of small, fixed-length vectors. In addition to the design trade-offs motivating our fixed-length vector design choice, we review some of the C++ template features essential to an efficient, succinct implementation. In particular, we highlight some of the standard C++ features, such as partial template specialization, that are not supported by all compilers currently. This report provides an inventory listing the relevant support currently provided by some key compilers, as well as test code one can use to verify compiler capabilities.

Role of standard documents in advancing the standardization of microfluidics connectors

NASA Astrophysics Data System (ADS)

Tantra, Ratna; van Heeren, Henne; Jarman, John

2016-04-01

An emerging trend within the microfluidic community is to standardize common parts in order to facilitate design and production activities. The goal is clear: to enhance interoperability and promote plug-and-play. A recent launch of a pan-European project, Microfluidic (MF) Manufacturing, has identified an item that is in immediate need of standardization: having in place geometrical specifications for MF connectors. In order to accelerate the adoption of such standards, there is a need to consider the pivotal role of standard documents. The purpose of this paper is to provide background information on document standards development. In addition, the future implications related to the MF manufacturing project will be discussed. A strengths, weaknesses, opportunities, and threats analysis has been carried out to identify points of action. The findings show that although there is a need to publish under International Organization for Standardization (ISO), the actual realization of a full ISO standard document is not feasible. The recommendation is to initially publish via an ISO Workshop Agreement. Parallel to such activity, there is a need to encourage stakeholders help kick start a currently dormant working group that supports microfluidics under ISO to help pave the way for future standardization activities in the microfluidics community.

Newly Enacted Intent Changes to ADS-B MASPS: Emphasis on Operations, Compatibility, and Integrity

NASA Technical Reports Server (NTRS)

Barhydt, Richard; Warren, Anthony W.

2002-01-01

Significant changes to the intent reporting structure in the Minimum Aviation System Performance Standards (MASPS) for Automatic Dependent Surveillance Broadcast (ADS-B) have recently been approved by RTCA Special Committee 186. The re-structured intent formats incorporate two major changes to the current MASPS (DO-242): addition of a Target State (TS) report that provides information on the horizontal and vertical targets for the current flight segment and replacement of the current Trajectory Change Point (TCP) and TCP+1 reports with Trajectory Change (TC) reports. TC reports include expanded information about TCPs and their connecting flight segments, in addition to making provisions for trajectory conformance elements. New intent elements are designed to accommodate a greater range of intent information, better reflect operational use and capabilities of existing and future aircraft avionics, and aid trajectory synthesis and conformance monitoring systems. These elements are expected to benefit near-term and future Air Traffic Management (ATM) applications, including separation assurance, local traffic flow management, and conformance monitoring. The current MASPS revision (DO-242A) implements those intent elements that are supported by current avionics standards and data buses. Additional elements are provisioned for inclusion in future MASPS revisions (beyond DO-242A) as avionics systems are evolved.

10 CFR 50.150 - Aircraft impact assessment.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 13, 2009; (B) Renewal of standard design certifications in effect on July 13, 2009 which have not..., standard design approval, or manufactured reactor; or (B) Reference a standard design certification issued... certification or standard design approval; or (B) Reference a standard design certification issued before July...

10 CFR 50.150 - Aircraft impact assessment.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 13, 2009; (B) Renewal of standard design certifications in effect on July 13, 2009 which have not..., standard design approval, or manufactured reactor; or (B) Reference a standard design certification issued... certification or standard design approval; or (B) Reference a standard design certification issued before July...

10 CFR 50.150 - Aircraft impact assessment.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 13, 2009; (B) Renewal of standard design certifications in effect on July 13, 2009 which have not..., standard design approval, or manufactured reactor; or (B) Reference a standard design certification issued... certification or standard design approval; or (B) Reference a standard design certification issued before July...

10 CFR 50.150 - Aircraft impact assessment.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 13, 2009; (B) Renewal of standard design certifications in effect on July 13, 2009 which have not..., standard design approval, or manufactured reactor; or (B) Reference a standard design certification issued... certification or standard design approval; or (B) Reference a standard design certification issued before July...

Programmable, very low noise current source.

PubMed

Scandurra, G; Cannatà, G; Giusi, G; Ciofi, C

2014-12-01

We propose a new approach for the realization of very low noise programmable current sources mainly intended for application in the field of low frequency noise measurements. The design is based on a low noise Junction Field Effect Transistor (JFET) acting as a high impedance current source and programmability is obtained by resorting to a low noise, programmable floating voltage source that allows to set the sourced current at the desired value. The floating voltage source is obtained by exploiting the properties of a standard photovoltaic MOSFET driver. Proper filtering and a control network employing super-capacitors allow to reduce the low frequency output noise to that due to the low noise JFET down to frequencies as low as 100 mHz while allowing, at the same time, to set the desired current by means of a standard DA converter with an accuracy better than 1%. A prototype of the system capable of supplying currents from a few hundreds of μA up to a few mA demonstrates the effectiveness of the approach we propose. When delivering a DC current of about 2 mA, the power spectral density of the current fluctuations at the output is found to be less than 25 pA/√Hz at 100 mHz and less than 6 pA/√Hz for f > 1 Hz, resulting in an RMS noise in the bandwidth from 0.1 to 10 Hz of less than 14 pA.

Programmable, very low noise current source

NASA Astrophysics Data System (ADS)

Scandurra, G.; Cannatà, G.; Giusi, G.; Ciofi, C.

2014-12-01

We propose a new approach for the realization of very low noise programmable current sources mainly intended for application in the field of low frequency noise measurements. The design is based on a low noise Junction Field Effect Transistor (JFET) acting as a high impedance current source and programmability is obtained by resorting to a low noise, programmable floating voltage source that allows to set the sourced current at the desired value. The floating voltage source is obtained by exploiting the properties of a standard photovoltaic MOSFET driver. Proper filtering and a control network employing super-capacitors allow to reduce the low frequency output noise to that due to the low noise JFET down to frequencies as low as 100 mHz while allowing, at the same time, to set the desired current by means of a standard DA converter with an accuracy better than 1%. A prototype of the system capable of supplying currents from a few hundreds of μA up to a few mA demonstrates the effectiveness of the approach we propose. When delivering a DC current of about 2 mA, the power spectral density of the current fluctuations at the output is found to be less than 25 pA/√Hz at 100 mHz and less than 6 pA/√Hz for f > 1 Hz, resulting in an RMS noise in the bandwidth from 0.1 to 10 Hz of less than 14 pA.

The Proposed Anti-Counterfeiting Trade Agreement: Background and Key Issues

DTIC Science & Technology

2010-03-12

or is negotiating regional and bilateral FTAs with several of the ACTA participants. Some observers have questioned why countries designated in...Notably, China, India , and Brazil currently are not participants to this agreement. Negotiations on the agreement are ongoing; participants have expressed...bilateral free trade agreements ( FTAs ). In negotiating recent FTAs , the USTR frequently has sought levels of protection that exceed the minimum standards

Beyond Nomothetic Classification of Behavioural Difficulties: Using Valued Outcomes Analysis to Deal with the Behaviour Problems that Occur in the Classroom

ERIC Educational Resources Information Center

Bitsika, Vicki

2005-01-01

The number of students who are labeled as having some form of behavioural disorder which requires specialized assistance in the regular school setting is growing. Current approaches to working with these students are often based on the standardized application of treatments designed to modify general symptoms rather than specific behaviours. It is…

A Method for Generating Educational Test Items That Are Aligned to the Common Core State Standards

ERIC Educational Resources Information Center

Gierl, Mark J.; Lai, Hollis; Hogan, James B.; Matovinovic, Donna

2015-01-01

The demand for test items far outstrips the current supply. This increased demand can be attributed, in part, to the transition to computerized testing, but, it is also linked to dramatic changes in how 21st century educational assessments are designed and administered. One way to address this growing demand is with automatic item generation.…

Use of human engineering standards in design

NASA Technical Reports Server (NTRS)

Rogers, J. G.; Armstrong, R.

1977-01-01

Results are presented for a research study intended to assess the impact of present human engineering standards on product design. The approach consisted of three basic steps: a comparison of two display panels to determine if, in fact, products designed to the same standards are truly standardized; a review of two existing standards to determine how well their information can be used to solve design problems; and a survey of human factors specialists to assess their opinions about standards. It is shown that standards have less than the desired influence on product design. This is evidenced by a lack of standardization between hardware designed under common standards, by deficiencies within the standards that detract from their usefulness and encourage users to ignore them, and by the respondents of the survey who consider standards less valuable than other reference sources for design implementation. Recommendations aimed at enhancing the use of standards are set forth.

Motorcycle helmets--a state of the art review.

PubMed

Fernandes, F A O; Alves de Sousa, R J

2013-07-01

This paper tries to make an overview of the work carried out by scientific community in the area of road helmets safety. In an area that is constantly being pushed forward by market competition, self-awareness of danger and tighter standards, several research groups around the world have contributed to safety gear improvement. In this work concepts related to head impact protection and energy absorption are explained. It also makes reference to the theories related to the development of helmets, as well as to the different existing types nowadays. The materials that are typically used in impact situations and new design concepts are also approached. In addition, it is presented a literature review of current--and most commonly used--helmet test standards, along with new tests and helmet concepts to assess the effects of rotational motion. In a non-restrictive, and never up-to-date report, a state-of-art review on road helmets safety is done, with a special insight into brain injury, helmet design and standards. Copyright © 2013 Elsevier Ltd. All rights reserved.

Micro-costing studies in the health and medical literature: protocol for a systematic review

PubMed Central

2014-01-01

Background Micro-costing is a cost estimation method that allows for precise assessment of the economic costs of health interventions. It has been demonstrated to be particularly useful for estimating the costs of new interventions, for interventions with large variability across providers, and for estimating the true costs to the health system and to society. However, existing guidelines for economic evaluations do not provide sufficient detail of the methods and techniques to use when conducting micro-costing analyses. Therefore, the purpose of this study is to review the current literature on micro-costing studies of health and medical interventions, strategies, and programs to assess the variation in micro-costing methodology and the quality of existing studies. This will inform current practice in conducting and reporting micro-costing studies and lead to greater standardization in methodology in the future. Methods/Design We will perform a systematic review of the current literature on micro-costing studies of health and medical interventions, strategies, and programs. Using rigorously designed search strategies, we will search Ovid MEDLINE, EconLit, BIOSIS Previews, Embase, Scopus, and the National Health Service Economic Evaluation Database (NHS EED) to identify relevant English-language articles. These searches will be supplemented by a review of the references of relevant articles identified. Two members of the review team will independently extract detailed information on the design and characteristics of each included article using a standardized data collection form. A third reviewer will be consulted to resolve discrepancies. We will use checklists that have been developed for critical appraisal of health economics studies to evaluate the quality and potential risk of bias of included studies. Discussion This systematic review will provide useful information to help standardize the methods and techniques for conducting and reporting micro-costing studies in research, which can improve the quality and transparency of future studies and enhance comparability and interpretation of findings. In the long run, these efforts will facilitate clinical and health policy decision-making about resource allocation. Trial registration Systematic review registration: PROSPERO CRD42014007453. PMID:24887208

A novel drill design for photoacoustic guided surgeries

NASA Astrophysics Data System (ADS)

Shubert, Joshua; Lediju Bell, Muyinatu A.

2018-02-01

Fluoroscopy is currently the standard approach for image guidance of surgical drilling procedures. In addition to the harmful radiation dose to the patient and surgeon, fluoroscopy fails to visualize critical structures such as blood vessels and nerves within the drill path. Photoacoustic imaging is a well-suited imaging method to visualize these structures and it does not require harmful ionizing radiation. However, there is currently no clinical system available to deliver light to occluded drill bit tips. To address this challenge, a prototype drill was designed, built, and tested using an internal light delivery system that allows laser energy to be transferred from a stationary laser source to the tip of a spinning drill bit. Photoacoustic images were successfully obtained with the drill bit submerged in water and with the drill tip inserted into a thoracic vertebra from a human cadaver.

Process Analytical Technology (PAT): batch-to-batch reproducibility of fermentation processes by robust process operational design and control.

PubMed

Gnoth, S; Jenzsch, M; Simutis, R; Lübbert, A

2007-10-31

The Process Analytical Technology (PAT) initiative of the FDA is a reaction on the increasing discrepancy between current possibilities in process supervision and control of pharmaceutical production processes and its current application in industrial manufacturing processes. With rigid approval practices based on standard operational procedures, adaptations of production reactors towards the state of the art were more or less inhibited for long years. Now PAT paves the way for continuous process and product improvements through improved process supervision based on knowledge-based data analysis, "Quality-by-Design"-concepts, and, finally, through feedback control. Examples of up-to-date implementations of this concept are presented. They are taken from one key group of processes in recombinant pharmaceutical protein manufacturing, the cultivations of genetically modified Escherichia coli bacteria.

Semantic e-Science in Space Physics - A Case Study

NASA Astrophysics Data System (ADS)

Narock, T.; Yoon, V.; Merka, J.; Szabo, A.

2009-05-01

Several search and retrieval systems for space physics data are currently under development in NASA's heliophysics data environment. We present a case study of two such systems, and describe our efforts in implementing an ontology to aid in data discovery. In doing so we highlight the various aspects of knowledge representation and show how they led to our ontology design, creation, and implementation. We discuss advantages that scientific reasoning allows, as well as difficulties encountered in current tools and standards. Finally, we present a space physics research project conducted with and without e-Science and contrast the two approaches.

Sensitivity Study of the Wall Interference Correction System (WICS) for Rectangular Tunnels

NASA Technical Reports Server (NTRS)

Walker, Eric L.; Everhart, Joel L.; Iyer, Venkit

2001-01-01

An off-line version of the Wall Interference Correction System (WICS) has been implemented for the NASA Langley National Transonic Facility. The correction capability is currently restricted to corrections for solid wall interference in the model pitch plane for Mach numbers less than 0.45 due to a limitation in tunnel calibration data. A study to assess output sensitivity to measurement uncertainty was conducted to determine standard operational procedures and guidelines to ensure data quality during the testing process. Changes to the current facility setup and design recommendations for installing the WICS code into a new facility are reported.

Third-Order Elliptic Lowpass Filter for Multi-Standard Baseband Chain Using Highly Linear Digitally Programmable OTA

NASA Astrophysics Data System (ADS)

Elamien, Mohamed B.; Mahmoud, Soliman A.

2018-03-01

In this paper, a third-order elliptic lowpass filter is designed using highly linear digital programmable balanced OTA. The filter exhibits a cutoff frequency tuning range from 2.2 MHz to 7.1 MHz, thus, it covers W-CDMA, UMTS, and DVB-H standards. The programmability concept in the filter is achieved by using digitally programmable operational transconductors amplifier (DPOTA). The DPOTA employs three linearization techniques which are the source degeneration, double differential pair and the adaptive biasing. Two current division networks (CDNs) are used to control the value of the transconductance. For the DPOTA, the third-order harmonic distortion (HD3) remains below -65 dB up to 0.4 V differential input voltage at 1.2 V supply voltage. The DPOTA and the filter are designed and simulated in 90 nm CMOS technology with LTspice simulator.

Hydrogen Safety Issues Compared to Safety Issues with Methane andPropane

DOE Office of Scientific and Technical Information (OSTI.GOV)

Green, Michael A.

The hydrogen economy is not possible if the safety standards currently applied to liquid hydrogen and hydrogen gas by many laboratories are applied to devices that use either liquid or gaseous hydrogen. Methane and propane are commonly used by ordinary people without the special training. This report asks, 'How is hydrogen different from flammable gasses that are commonly being used all over the world?' This report compares the properties of hydrogen, methane and propane and how these properties may relate to safety when they are used in both the liquid and gaseous state. Through such an analysis, sensible safety standardsmore » for the large-scale (or even small-scale) use of liquid and gaseous hydrogen systems can be developed. This paper is meant to promote discussion of issues related to hydrogen safety so that engineers designing equipment can factor sensible safety standards into their designs.« less

Using School-Level Interviews to Develop a Multisite PE Intervention Program

PubMed Central

Moe, Stacey G.; Pickrel, Julie; McKenzie, Thomas L.; Strikmiller, Patricia K.; Coombs, Derek; Murrie, Dale

2008-01-01

The Trial of Activity for Adolescent Girls (TAAG) is a randomized, multicenter field trial in middle schools that aims to reduce the decline of physical activity in adolescent girls. To inform the development of the TAAG intervention, two phases of formative research are conducted to gain information on school structure and environment and on the conduct of physical education classes. Principals and designated staff at 64 eligible middle schools were interviewed using the School Survey during Phase 1. The following year (Phase 2), physical education department heads of the 36 schools selected into TAAG were interviewed. Responses were examined to design a standardized, multicomponent physical activity intervention for six regions of the United States. This article describes the contribution of formative research to the development of the physical education intervention component and summarizes the alignment of current school policies and practices with national and state standards. PMID:16397159

Proposed Advanced Reactor Adaptation of the Standard Review Plan NUREG-0800 Chapter 4 (Reactor) for Sodium-Cooled Fast Reactors and Modular High-Temperature Gas-Cooled Reactors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Belles, Randy; Poore, III, Willis P.; Brown, Nicholas R.

2017-03-01

This report proposes adaptation of the previous regulatory gap analysis in Chapter 4 (Reactor) of NUREG 0800, Standard Review Plan (SRP) for the Review of Safety Analysis Reports for Nuclear Power Plants: LWR [Light Water Reactor] Edition. The proposed adaptation would result in a Chapter 4 review plan applicable to certain advanced reactors. This report addresses two technologies: the sodium-cooled fast reactor (SFR) and the modular high temperature gas-cooled reactor (mHTGR). SRP Chapter 4, which addresses reactor components, was selected for adaptation because of the possible significant differences in advanced non-light water reactor (non-LWR) technologies compared with the current LWR-basedmore » description in Chapter 4. SFR and mHTGR technologies were chosen for this gap analysis because of their diverse designs and the availability of significant historical design detail.« less

Home noninvasive ventilation: what does the anesthesiologist need to know?

PubMed

Brown, Karen A; Bertolizio, Gianluca; Leone, Marisa; Dain, Steven L

2012-09-01

Treatment of chronic respiratory failure with noninvasive ventilation (NIV) is standard pediatric practice, and NIV systems are commonly used in the home setting. Although practice guidelines on the perioperative management of children supported with home NIV systems have yet to be published, increasingly these patients are referred for consultation regarding perioperative management. Just as knowledge of pharmacology underlies the safe prescription of medication, so too knowledge of biomedical design is necessary for the safe prescription of NIV therapy. The medical device design requirements developed by the Organization for International Standardization provide a framework to rationalize the safe prescription of NIV for hospitalized patients supported at home with NIV systems. This review article provides an overview of the indications for home NIV therapy, an overview of the medical devices currently available to deliver it, and a specific discussion of the management conundrums confronting anesthesiologists.

International Space Station ECLSS Technical Task Agreement Summary Report

NASA Technical Reports Server (NTRS)

Ray, C. D. (Compiler); Salyer, B. H. (Compiler)

1999-01-01

This Technical Memorandum provides a summary of current work accomplished under Technical Task Agreement (TTA) by the Marshall Space Flight Center (MSFC) regarding the International Space Station (ISS) Environmental Control and Life Support System (ECLSS). Current activities include ECLSS component design and development, computer model development, subsystem/integrated system testing, life testing, and general test support provided to the ISS program. Under ECLSS design, MSFC was responsible for the six major ECLSS functions, specifications and standard, component design and development, and was the architectural control agent for the ISS ECLSS. MSFC was responsible for ECLSS analytical model development. In-house subsystem and system level analysis and testing were conducted in support of the design process, including testing air revitalization, water reclamation and management hardware, and certain nonregenerative systems. The activities described herein were approved in task agreements between MSFC and NASA Headquarters Space Station Program Management Office and their prime contractor for the ISS, Boeing. These MSFC activities are in line to the designing, development, testing, and flight of ECLSS equipment planned by Boeing. MSFC's unique capabilities for performing integrated systems testing and analyses, and its ability to perform some tasks cheaper and faster to support ISS program needs, are the basis for the TTA activities.

Software Development Processes Applied to Computational Icing Simulation

NASA Technical Reports Server (NTRS)

Levinson, Laurie H.; Potapezuk, Mark G.; Mellor, Pamela A.

1999-01-01

The development of computational icing simulation methods is making the transition form the research to common place use in design and certification efforts. As such, standards of code management, design validation, and documentation must be adjusted to accommodate the increased expectations of the user community with respect to accuracy, reliability, capability, and usability. This paper discusses these concepts with regard to current and future icing simulation code development efforts as implemented by the Icing Branch of the NASA Lewis Research Center in collaboration with the NASA Lewis Engineering Design and Analysis Division. With the application of the techniques outlined in this paper, the LEWICE ice accretion code has become a more stable and reliable software product.

Engineering test facility design definition

NASA Technical Reports Server (NTRS)

Bercaw, R. W.; Seikel, G. R.

1980-01-01

The Engineering Test Facility (ETF) is the major focus of the Department of Energy (DOE) Magnetohydrodynamics (MHD) Program to facilitate commercialization and to demonstrate the commercial operability of MHD/steam electric power. The ETF will be a fully integrated commercial prototype MHD power plant with a nominal output of 200 MW sub e. Performance of this plant is expected to meet or surpass existing utility standards for fuel, maintenance, and operating costs; plant availability; load following; safety; and durability. It is expected to meet all applicable environmental regulations. The current design concept conforming to the general definition, the basis for its selection, and the process which will be followed in further defining and updating the conceptual design.

Direct DC 10 V comparison between two programmable Josephson voltage standards made of niobium nitride (NbN)-based and niobium (Nb)-based Josephson junctions

NASA Astrophysics Data System (ADS)

Solve, S.; Chayramy, R.; Maruyama, M.; Urano, C.; Kaneko, N.-H.; Rüfenacht, A.

2018-04-01

BIPM’s new transportable programmable Josephson voltage standard (PJVS) has been used for an on-site comparison at the National Metrology Institute of Japan (NMIJ) and the National Institute of Advanced Industrial Science and Technology (AIST) (NMIJ/AIST, hereafter called just NMIJ unless otherwise noted). This is the first time that an array of niobium-based Josephson junctions with amorphous niobium silicon Nb x Si1-x barriers, developed by the National Institute of Standards and Technology4 (NIST), has been directly compared to an array of niobium nitride (NbN)-based junctions (developed by the NMIJ in collaboration with the Nanoelectronics Research Institute (NeRI), AIST). Nominally identical voltages produced by both systems agreed within 5 parts in 1012 (0.05 nV at 10 V) with a combined relative uncertainty of 7.9  ×  10-11 (0.79 nV). The low side of the NMIJ apparatus is, by design, referred to the ground potential. An analysis of the systematic errors due to the leakage current to ground was conducted for this ground configuration. The influence of a multi-stage low-pass filter installed at the output measurement leads of the NMIJ primary standard was also investigated. The number of capacitances in parallel in the filter and their insulation resistance have a direct impact on the amplitude of the systematic voltage error introduced by the leakage current, even if the current does not necessarily return to ground. The filtering of the output of the PJVS voltage leads has the positive consequence of protecting the array from external sources of noise. Current noise, when coupled to the array, reduces the width or current range of the quantized voltage steps. The voltage error induced by the leakage current in the filter is an order of magnitude larger than the voltage error in the absence of all filtering, even though the current range of steps is significantly decreased without filtering.

Process innovation in high-performance systems: From polymeric composites R&D to design and build of airplane showers

NASA Astrophysics Data System (ADS)

Wu, Yi-Jui

In the aerospace industry reducing aircraft weight is key because it increases flight performance and drives down operating costs. With fierce competition in the commercial aircraft industry, companies that focused primarily on exterior aircraft performance design issues are turning more attention to the design of aircraft interior. Simultaneously, there has been an increase in the number of new amenities offered to passengers especially in first class travel and executive jets. These new amenities present novel and challenging design parameters that include integration into existing aircraft systems without sacrificing flight performance. The objective of this study was to design a re-circulating shower system for an aircraft that weighs significantly less than pre-existing shower designs. This was accomplished by integrating processes from polymeric composite materials, water filtration, and project management. Carbon/epoxy laminates exposed to hygrothermal cycling conditions were evaluated and compared to model calculations. Novel materials and a variety of fabrication processes were developed to create new types of paper for honeycomb applications. Experiments were then performed on the properties and honeycomb processability of these new papers. Standard water quality tests were performed on samples taken from the re-circulating system to see if current regulatory standards were being met. These studies were executed and integrated with tools from project management to design a better shower system for commercial aircraft applications.

Fort Hood Solar Total Energy Project. Volume II. Preliminary design. Part 1. System criteria and design description. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

None,

1979-01-01

This volume documents the preliminary design developed for the Solar Total Energy System to be installed at Fort Hood, Texas. Current system, subsystem, and component designs are described and additional studies which support selection among significant design alternatives are presented. Overall system requirements which form the system design basis are presented. These include program objectives; performance and output load requirements; industrial, statutory, and regulatory standards; and site interface requirements. Material in this section will continue to be issued separately in the Systems Requirements Document and maintained current through revision throughout future phases of the project. Overall system design and detailedmore » subsystem design descriptions are provided. Consideration of operation and maintenance is reflected in discussion of each subsystem design as well as in an integrated overall discussion. Included are the solar collector subsystem; the thermal storage subsystem, the power conversion sybsystem (including electrical generation and distribution); the heating/cooling and domestic hot water subsystems; overall instrumentation and control; and the STES building and physical plant. The design of several subsystems has progressed beyond the preliminary stage; descriptions for such subsystems are therefore provided in more detail than others to provide complete documentation of the work performed. In some cases, preliminary design parameters require specific verificaton in the definitive design phase and are identified in the text. Subsystem descriptions will continue to be issued and revised separately to maintain accuracy during future phases of the project. (WHK)« less

78 FR 16051 - Vehicle/Track Interaction Safety Standards; High-Speed and High Cant Deficiency Operations

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-13

...FRA is amending the Track Safety Standards and Passenger Equipment Safety Standards to promote the safe interaction of rail vehicles with the track over which they operate under a variety of conditions at speeds up to 220 m.p.h. The final rule revises standards for track geometry and safety limits for vehicle response to track conditions, enhances vehicle/track qualification procedures, and adds flexibility for permitting high cant deficiency train operations through curves at conventional speeds. The rule accounts for a range of vehicle types that are currently in operation, as well as vehicle types that may likely be used in future high-speed or high cant deficiency rail operations, or both. The rule is based on the results of simulation studies designed to identify track geometry irregularities associated with unsafe wheel/rail forces and accelerations, thorough reviews of vehicle qualification and revenue service test data, and consideration of international practices.

The effect of pelvic physiotherapy on reduction of functional constipation in children: design of a multicentre randomised controlled trial

PubMed Central

2013-01-01

Background Functional constipation is a common disorder worldwide and is found in all paediatric age groups. Functional constipation can be caused by delayed colonic transit or dysfunction of the pelvic floor muscles. Standard medical care in paediatric practice is often based on clinical experience and mainly consists of a behavioural approach and toilet training, along with the prescription of laxatives. Evidence to evaluate the effectiveness of pelvic physiotherapy for this complaint is lacking. Methods/design A two-armed multicentre randomised controlled trial has been designed. We hypothesise that the combination of pelvic physiotherapy and standard medical care will be more effective than standard medical care alone for constipated children, aged 5 to 17 years. Children with functional constipation according to the Rome III will be included. Web-based baseline and follow-up measurements, scheduled at 3 and 6 months after inclusion, consist of the numeric rating scale in relation to the perceived severity of the problem, the Strength and Difficulties Questionnaire and subjective improvement post-intervention (global perceived effect). Examination of the pelvic floor muscle functions, including digital testing and biofeedback, will take place during baseline and follow-up measurements at the physiotherapist. The control group will only receive standard medical care, involving at least three contacts during five months, whereas the experimental group will receive standard medical care plus pelvic physiotherapy, with a maximum of six contacts. The physiotherapy intervention will include standard medical care, pelvic floor muscle training, attention to breathing, relaxation and awareness of body and posture. The study duration will be six months from randomisation, with a three-year recruitment period. The primary outcome is the absence of functional constipation according to the Rome III criteria. Discussion This section discusses the relevance of publishing the study design and the development of the presented physiotherapy protocol. It also addresses difficulties when interpreting the literature with regard to the effectiveness of biofeedback, potential confounding, and future research indications. To our knowledge, this article is the first to describe the design of a randomised controlled trial among children with constipation to assess the effect of pelvic physiotherapy as an add-on to standard medical care. Trial registration Current Controlled Trials NL30551.068.09 PMID:23914827

Network based sky Brightness Monitor

NASA Astrophysics Data System (ADS)

McKenna, Dan; Pulvermacher, R.; Davis, D. R.

2009-01-01

We have developed and are currently testing an autonomous 2 channel photometer designed to measure the night sky brightness in the visual wavelengths over a multi-year campaign. The photometer uses a robust silicon sensor filtered with Hoya CM500 glass. The Sky brightness is measured every minute at two elevation angles typically zenith and 20 degrees to monitor brightness and transparency. The Sky Brightness monitor consists of two units, the remote photometer and a network interface. Currently these devices use 2.4 Ghz transceivers with a free space range of 100 meters. The remote unit is battery powered with day time recharging using a solar panel. Data received by the network interface transmits data via standard POP Email protocol. A second version is under development for radio sensitive areas using an optical fiber for data transmission. We will present the current comparison with the National Park Service sky monitoring camera. We will also discuss the calibration methods used for standardization and temperature compensation. This system is expected to be deployed in the next year and be operated by the International Dark Sky Association SKYMONITOR project.

Advanced telemetry systems for payloads. Technology needs, objectives and issues

NASA Technical Reports Server (NTRS)

1990-01-01

The current trends in advanced payload telemetry are the new developments in advanced modulation/coding, the applications of intelligent techniques, data distribution processing, and advanced signal processing methodologies. Concerted efforts will be required to design ultra-reliable man-rated software to cope with these applications. The intelligence embedded and distributed throughout various segments of the telemetry system will need to be overridden by an operator in case of life-threatening situations, making it a real-time integration issue. Suitable MIL standards on physical interfaces and protocols will be adopted to suit the payload telemetry system. New technologies and techniques will be developed for fast retrieval of mass data. Currently, these technology issues are being addressed to provide more efficient, reliable, and reconfigurable systems. There is a need, however, to change the operation culture. The current role of NASA as a leader in developing all the new innovative hardware should be altered to save both time and money. We should use all the available hardware/software developed by the industry and use the existing standards rather than inventing our own.

EM calibration based on Post OPC layout analysis

NASA Astrophysics Data System (ADS)

Sreedhar, Aswin; Kundu, Sandip

2010-03-01

Design for Manufacturability (DFM) involves changes to the design and CAD tools to help increase pattern printability and improve process control. Design for Reliability (DFR) performs the same to improve reliability of devices from failures such as Electromigration (EM), gate-oxide break down, hot carrier injection (HCI), Negative Bias Temperature Insatiability (NBTI) and mechanical stress effects. Electromigration (EM) occurs due to migration or displacement of atoms as a result of the movement of electrons through a conducting medium. The rate of migration determines the Mean Time to Failure (MTTF) which is modeled as a function of temperature and current density. The model itself is calibrated through failure analysis (FA) of parts that are deemed to have failed due to EM against design parameters such as linewidth. Reliability Verification (RV) of a design involves verifying that every conducting line in a design meets certain MTTF threshold. In order to perform RV, current density for each wire must be computed. Current itself is a function of the parasitics that are determined through RC extraction. The standard practice is to perform the RC extraction and current density calculation on drawn, pre-OPC layouts. If a wire fails to meet threshold for MTTF, it may be resized. Subsequently, mask preparation steps such as OPC and PSM introduce extra features such as SRAFs, jogs,hammerheads and serifs that change their resistance, capacitance and current density values. Hence, calibrating EM model based on pre-OPC layouts will lead to different results compared to post-OPC layouts. In this work, we compare EM model calibration and reliability check based on drawn layout versus predicted layout, where the drawn layout is pre-OPC layout and predicted layout is based on litho simulation of post-OPC layout. Results show significant divergence between these two approaches, making a case for methodology based on predicted layout.

JSC Design and Procedural Standards, JSC-STD-8080

NASA Technical Reports Server (NTRS)

Punch, Danny T.

2011-01-01

This document provides design and procedural requirements appropriate for inclusion in specifications for any human spaceflight program, project, spacecraft, system, or end item. The term "spacecraft" as used in the standards includes launch vehicles, orbital vehicles, non-terrestrial surface vehicles, and modules. The standards are developed and maintained as directed by Johnson Space Center (JSC) Policy Directive JPD 8080.2, JSC Design and Procedural Standards for Human Space Flight Equipment. The Design and Procedural Standards contained in this manual represent human spacecraft design and operational knowledge applicable to a wide range of spaceflight activities. These standards are imposed on JSC human spaceflight equipment through JPD 8080.2. Designers shall comply with all design standards applicable to their design effort.

Energy efficient engine flight propulsion system preliminary analysis and design report

NASA Technical Reports Server (NTRS)

Gardner, W. B.

1979-01-01

A flight propulsion system preliminary design was established that meets the program goals of at least a 12 percent reduction in thrust specific fuel consumption, at least a five percent reduction in direct operating cost, and one-half the performance deterioration rate of the most efficient current commercial engines. The engine provides a high probability of meeting the 1978 noise rule goal. Smoke and gaseous emissions defined by the EPA proposed standards for engines newly certified after 1 January 1981 are met with the exception of NOx, despite incorporation of all known NOx reduction technology.

An approach for configuring space photovoltaic tandem arrays based on cell layer performance

NASA Technical Reports Server (NTRS)

Flora, C. S.; Dillard, P. A.

1991-01-01

Meeting solar array performance goals of 300 W/Kg requires use of solar cells with orbital efficiencies greater than 20 percent. Only multijunction cells and cell layers operating in tandem produce this required efficiency. An approach for defining solar array design concepts that use tandem cell layers involve the following: transforming cell layer performance at standard test conditions to on-orbit performance; optimizing circuit configuration with tandem cell layers; evaluating circuit sensitivity to cell current mismatch; developing array electrical design around selected circuit; and predicting array orbital performance including seasonal variations.

Design and development of the coaxial scanner as a compact high-performance thermal imager

NASA Astrophysics Data System (ADS)

Lettington, Alan H.

1994-09-01

This paper describes the original requirement of a light weight, high performance, low cost thermal imager which resulted in the design of the novel coaxial scanner. The early form of imager used a dedicated display to match the original cyclic scan sequence. With the advent of fast digital scan converters and the desire to use standard TV monitors the imager was redesigned and new TV compatible scan sequences devised. A version of this scanner is currently being manufactured by GEC Marconi Avionics, UK, and the paper concludes with examples of its application.

Open Technology Approaches to Geospatial Interface Design

NASA Astrophysics Data System (ADS)

Crevensten, B.; Simmons, D.; Alaska Satellite Facility

2011-12-01

What problems do you not want your software developers to be solving? Choosing open technologies across the entire stack of software development-from low-level shared libraries to high-level user interaction implementations-is a way to help ensure that customized software yields innovative and valuable tools for Earth Scientists. This demonstration will review developments in web application technologies and the recurring patterns of interaction design regarding exploration and discovery of geospatial data through the Vertex: ASF's Dataportal interface, a project utilizing current open web application standards and technologies including HTML5, jQueryUI, Backbone.js and the Jasmine unit testing framework.

Design, fabrication and characterization of a poly-silicon PN junction

NASA Astrophysics Data System (ADS)

Tower, Jason D.

This thesis details the design, fabrication, and characterization of a PN junction formed from p-type mono-crystalline silicon and n-type poly-crystalline silicon. The primary product of this project was a library of standard operating procedures (SOPs) for the fabrication of such devices, laying the foundations for future work and the development of a class in fabrication processes. The fabricated PN junction was characterized; in particular its current-voltage relationship was measured and fit to models. This characterization was to determine whether or not the fabrication process could produce working PN junctions with acceptable operational parameters.

Development of a model for occipital fixation--validation of an analogue bone material.

PubMed

Mullett, H; O'Donnell, T; Felle, P; O'Rourke, K; FitzPatrick, D

2002-01-01

Several implant systems may be used to fuse the skull to the upper cervical spine (occipitocervical fusion). Current biomechanical evaluation is restricted by the limitations of human cadaveric specimens. This paper describes the design and validation of a synthetic testing model of the occipital bone. Data from thickness measurement and pull-out strength testing of a series of human cadaveric skulls was used in the design of a high-density rigid polyurethane foam model. The synthetic occipital model demonstrated repeatable and consistent morphological and biomechanical properties. The model provides a standardized environment for evaluation of occipital implants.

Improving Wayfinding for Older Users With Selective Attention Deficits

PubMed Central

Mishler, Ada D.; Neider, Mark B.

2016-01-01

Feature at a Glance Older adults experience difficulties with navigating their environments, and may need to rely on signs more heavily than younger adults. However, older adults also experience difficulties with focusing their visual attention, which suggests that signs need to be designed with the goal of making it as easy as possible to attend to them. This article discusses some design principles that may be especially important to compensate for declining attentional focus. These principles include distinctiveness, consistent appearance and location, standardized images, simplicity, isolation from other elements of the environment, and reassurance about the current route. PMID:28286405

Random Access Frame (RAF) System Neutral Buoyancy Evaluations

NASA Technical Reports Server (NTRS)

Howe, A. Scott; Polit-Casillas, Raul; Akin, David L.; McBryan, Katherine; Carlsen, Christopher

2015-01-01

The Random Access Frame (RAF) concept is a system for organizing internal layouts of space habitats, vehicles, and outposts. The RAF system is designed as a more efficient improvement over the current International Standard Payload Rack (ISPR) used on the International Space Station (ISS), which was originally designed to allow for swapping and resupply by the Space Shuttle. The RAF system is intended to be applied in variable gravity or microgravity environments. This paper discusses evaluations and results of testing the RAF system in a neutral buoyancy facility simulating low levels of gravity that might be encountered in a deep space environment.

Optical trapping performance of dielectric-metallic patchy particles

PubMed Central

Lawson, Joseph L.; Jenness, Nathan J.; Clark, Robert L.

2015-01-01

We demonstrate a series of simulation experiments examining the optical trapping behavior of composite micro-particles consisting of a small metallic patch on a spherical dielectric bead. A full parameter space of patch shapes, based on current state of the art manufacturing techniques, and optical properties of the metallic film stack is examined. Stable trapping locations and optical trap stiffness of these particles are determined based on the particle design and potential particle design optimizations are discussed. A final test is performed examining the ability to incorporate these composite particles with standard optical trap metrology technologies. PMID:26832054

Neutrino oscillations and Non-Standard Interactions

NASA Astrophysics Data System (ADS)

Farzan, Yasaman; Tórtola, Mariam

2018-02-01

Current neutrino experiments are measuring the neutrino mixing parameters with an unprecedented accuracy. The upcoming generation of neutrino experiments will be sensitive to subdominant oscillation effects that can give information on the yet-unknown neutrino parameters: the Dirac CP-violating phase, the mass ordering and the octant of θ_{23}. Determining the exact values of neutrino mass and mixing parameters is crucial to test neutrino models and flavor symmetries designed to predict these neutrino parameters. In the first part of this review, we summarize the current status of the neutrino oscillation parameter determination. We consider the most recent data from all solar experiments and the atmospheric data from Super-Kamiokande, IceCube and ANTARES. We also implement the data from the reactor neutrino experiments KamLAND, Daya Bay, RENO and Double Chooz as well as the long baseline neutrino data from MINOS, T2K and NOvA. If in addition to the standard interactions, neutrinos have subdominant yet-unknown Non-Standard Interactions (NSI) with matter fields, extracting the values of these parameters will suffer from new degeneracies and ambiguities. We review such effects and formulate the conditions on the NSI parameters under which the precision measurement of neutrino oscillation parameters can be distorted. Like standard weak interactions, the non-standard interaction can be categorized into two groups: Charged Current (CC) NSI and Neutral Current (NC) NSI. Our focus will be mainly on neutral current NSI because it is possible to build a class of models that give rise to sizeable NC NSI with discernible effects on neutrino oscillation. These models are based on new U(1) gauge symmetry with a gauge boson of mass ≲ 10 MeV. The UV complete model should be of course electroweak invariant which in general implies that along with neutrinos, charged fermions also acquire new interactions on which there are strong bounds. We enumerate the bounds that already exist on the electroweak symmetric models and demonstrate that it is possible to build viable models avoiding all these bounds. In the end, we review methods to test these models and suggest approaches to break the degeneracies in deriving neutrino mass parameters caused by NSI.

Establishing the need for an engineering standard for agricultural hitch pins.

PubMed

Deboy, G R; Knapp, W M; Field, W E; Krutz, G W; Corum, C L

2012-04-01

Documented incidents have occurred in which failure or unintentional disengagement of agricultural hitch pins has contributed to property damage and personal injury. An examination of current hitch pin use on a convenience sample of farm operations in Indiana revealed a variety of non-standard, worn and damaged, and inappropriately sized hitch pins in use. Informal interviews with the farm operators confirmed that hitch pin misuse, failure, or disengagement is a relatively widespread problem that remains largely unaddressed. On-site observations also suggested a low use of hitch pin retaining devices or safety chains. A review of prior research revealed that little attention has been given to this problem, and currently no documentation allows for an estimate of the frequency or severity of losses associated with hitch pin misuse, failure, or disengagement. No specific engineering standards were found that directly applied to the design, appropriate selection, or loading capacity of agricultural hitch pins. Major suppliers of replacement hitch pins currently provide little or no information on matching hitch pin size to intended applications, and most replacement hitch pins examined were of foreign origin, with the overwhelming majority imported from China or India. These replacement hitch pins provided no specifications other than diameter, length, and, in some cases, labeling that indicated that the pins had been "heat treated. " Testing of a sample of 11 commercially available replacement hitch pins found variation along the length of the pin shaft and between individual pins in surface hardness, a potential predictor of pin failure. Examination of 17 commercially available replacement pins also revealed a variety of identifiers used to describe pin composition and fabrication methods, e.g., "heat treated." None of the pins examined provided any specifications on loading capacity. It was therefore concluded that there is a need to develop an agricultural hitch pin engineering standard that would reflect current agricultural applications and practices and that would be promoted to both original equipment manufacturers and manufacturers and suppliers of replacement hitch pins. The standard should address the design of composite pins, heat treating, surface hardening, loading capacity and labeling of such, incorporation of unintentional disengagement prevention devices, indicators of the need for replacement due to wear, and safety information that should be included in operator instructions. ASABE is the most appropriate organization to develop such a standard. It was also concluded that agricultural safety and health programs and professionals need to raise the awareness of farmers concerning the appropriate selection and use of agricultural hitch pins, including the need to replace non-standard pins with pins less likely to fail or disengage during use, the need to replace hitch pins with indications of potential failure, and the importance of using appropriate safety chains, especially during transport of equipment behind tractors and trucks on public roads.

PICASSO: an end-to-end image simulation tool for space and airborne imaging systems

NASA Astrophysics Data System (ADS)

Cota, Steve A.; Bell, Jabin T.; Boucher, Richard H.; Dutton, Tracy E.; Florio, Chris J.; Franz, Geoffrey A.; Grycewicz, Thomas J.; Kalman, Linda S.; Keller, Robert A.; Lomheim, Terrence S.; Paulson, Diane B.; Willkinson, Timothy S.

2008-08-01

The design of any modern imaging system is the end result of many trade studies, each seeking to optimize image quality within real world constraints such as cost, schedule and overall risk. Image chain analysis - the prediction of image quality from fundamental design parameters - is an important part of this design process. At The Aerospace Corporation we have been using a variety of image chain analysis tools for many years, the Parameterized Image Chain Analysis & Simulation SOftware (PICASSO) among them. In this paper we describe our PICASSO tool, showing how, starting with a high quality input image and hypothetical design descriptions representative of the current state of the art in commercial imaging satellites, PICASSO can generate standard metrics of image quality in support of the decision processes of designers and program managers alike.

PICASSO: an end-to-end image simulation tool for space and airborne imaging systems

NASA Astrophysics Data System (ADS)

Cota, Stephen A.; Bell, Jabin T.; Boucher, Richard H.; Dutton, Tracy E.; Florio, Christopher J.; Franz, Geoffrey A.; Grycewicz, Thomas J.; Kalman, Linda S.; Keller, Robert A.; Lomheim, Terrence S.; Paulson, Diane B.; Wilkinson, Timothy S.

2010-06-01

The design of any modern imaging system is the end result of many trade studies, each seeking to optimize image quality within real world constraints such as cost, schedule and overall risk. Image chain analysis - the prediction of image quality from fundamental design parameters - is an important part of this design process. At The Aerospace Corporation we have been using a variety of image chain analysis tools for many years, the Parameterized Image Chain Analysis & Simulation SOftware (PICASSO) among them. In this paper we describe our PICASSO tool, showing how, starting with a high quality input image and hypothetical design descriptions representative of the current state of the art in commercial imaging satellites, PICASSO can generate standard metrics of image quality in support of the decision processes of designers and program managers alike.

Radiation shielding design of a new tomotherapy facility.

PubMed

Zacarias, Albert; Balog, John; Mills, Michael

2006-10-01

It is expected that intensity modulated radiation therapy (IMRT) and image guided radiation therapy (IGRT) will replace a large portion of radiation therapy treatments currently performed with conventional MLC-based 3D conformal techniques. IGRT may become the standard of treatment in the future for prostate and head and neck cancer. Many established facilities may convert existing vaults to perform this treatment method using new or upgraded equipment. In the future, more facilities undoubtedly will be considering de novo designs for their treatment vaults. A reevaluation of the design principles used in conventional vault design is of benefit to those considering this approach with a new tomotherapy facility. This is made more imperative as the design of the TomoTherapy system is unique in several aspects and does not fit well into the formalism of NCRP 49 for a conventional linear accelerator.

The importance of preservation of the ethical principle of equipoise in the design of clinical trials: relative impact of the methodological quality domains on the treatment effect in randomized controlled trials.

PubMed

Djulbegovic, Benjamin; Cantor, Alan; Clarke, Mike

2003-01-01

Previous research has identified methodological problems in the design and conduct of randomized trials that could, if left unaddressed, lead to biased results. In this report we discuss one such problem, inadequate control intervention, and argue that it can be by far the most important design characteristic of randomized trials in overestimating the effect of new treatments. Current guidelines for the design and reporting of randomized trials, such as the Consolidated Standards of Reporting Trials (CONSORT) statement, do not address the choice of the comparator intervention. We argue that an adequate control intervention can be selected if people designing a trial explicitly take into consideration the ethical principle of equipoise, also known as "the uncertainty principle."

Towards life cycle sustainability assessent of cities. A review of background knowledge.

PubMed

Albertí, Jaume; Balaguera, Alejandra; Brodhag, Christian; Fullana-I-Palmer, Pere

2017-12-31

This article analyses whether existing LCA and sustainability methods can be used in the assessment of a city or an urban region. The approach is performed through the review of current existing LCA-based and sustainability standards and guidelines. A focus is put into those LCA-based standards specially designed for the built environment. Moreover, a review of non-LCA based standards, indices and guides for the assessment of the sustainability of countries, cities or urban regions is done. The purpose is to check if these assessment tools can provide good results in the absence of LCA-based assessments for cities and urban regions. This review demonstrates the lack of consensus in the definition of both, the city and its boundaries, which hinders the development of useful sustainability standards. Furthermore, it is concluded that current sustainability assessment tools miss, at least, one of these aspects: (i) holistic point of view, (ii) focus on various environmental impacts, (iii) a Life Cycle (LC) perspective, and (iv) the possibility to compare the results among different cities or urban regions. From the LCA perspective, the deficiencies found also include the need for a definition of the function, functional unit (FU), and reference flow (RF) of neighbourhoods, cities, and urban regions. Copyright © 2017 Elsevier B.V. All rights reserved.

DOE Office of Scientific and Technical Information (OSTI.GOV)

White, Michael K.; Brown, Jason R.; Thornberg, Steven Michael

HFE-7100 and FC-72 fluorinert are two fluids used during weapon component manufacturing. HFE-7100 is a solvent used in the cleaning of parts, and FC-72 is the blowing agent of a polymeric removable foam. The presence of either FC-72 or HFE-7100 gas in weapon components can provide valuable information as to the stability of the materials. Therefore, gas standards are needed so HFE-7100 and FC-72 gas concentrations can be accurately measured. There is no current established procedure for generating gas standards of either HFE-7100 or FC-72. This report outlines the development of a method to generate gas standards ranging in concentrationmore » from 0.1 ppm to 10% by volume. These standards were then run on a Jeol GC-Mate II mass spectrometer and analyzed to produce calibration curves. We present a manifold design that accurately generates gas standards of HFE-7100 and FC-72 and a procedure that allows the amount of each to be determined.« less

Reliability Analysis of a Green Roof Under Different Storm Scenarios

NASA Astrophysics Data System (ADS)

William, R. K.; Stillwell, A. S.

2015-12-01

Urban environments continue to face the challenges of localized flooding and decreased water quality brought on by the increasing amount of impervious area in the built environment. Green infrastructure provides an alternative to conventional storm sewer design by using natural processes to filter and store stormwater at its source. However, there are currently few consistent standards available in North America to ensure that installed green infrastructure is performing as expected. This analysis offers a method for characterizing green roof failure using a visual aid commonly used in earthquake engineering: fragility curves. We adapted the concept of the fragility curve based on the efficiency in runoff reduction provided by a green roof compared to a conventional roof under different storm scenarios. We then used the 2D distributed surface water-groundwater coupled model MIKE SHE to model the impact that a real green roof might have on runoff in different storm events. We then employed a multiple regression analysis to generate an algebraic demand model that was input into the Matlab-based reliability analysis model FERUM, which was then used to calculate the probability of failure. The use of reliability analysis as a part of green infrastructure design code can provide insights into green roof weaknesses and areas for improvement. It also supports the design of code that is more resilient than current standards and is easily testable for failure. Finally, the understanding of reliability of a single green roof module under different scenarios can support holistic testing of system reliability.

Specification for strontium-90 500-watt(e) radioisotopic thermoelectric generator

NASA Astrophysics Data System (ADS)

Hammel, T.; Himes, J.; Lieberman, A.; McGrew, J. W.; Owings, D.; Schumann, F.

1983-04-01

A conceptual design for a demonstration 500-watt(e) radioisotopic thermoelectric generator (RTG) was created. The design effort was divided into two tasks, viz., create a design specification for a capsule strenth member that utilizes a standard Strontium 90 fluoride filled WESF inner liner, and create a conceptual design for a 500-watt(e) RTG. The strength member specification was designed to survive an external pressure of 24,500 psi and meet the requirements of special form radioisotope heat sources. Therefore the capsule is if desired, licensed for domestic and international transport. The design for the RTG features a radioisotopic heat source, an array of nine capsules in a tungsten biological shield, four current technology series connected thermoelectric conversion modules, low conductivity thermal insulation, and a passive finned housing radiator for waste heat dissipation. The preliminary RTG specification formulated previous to contract award was met or exceeded.

Parallelizing serial code for a distributed processing environment with an application to high frequency electromagnetic scattering

NASA Astrophysics Data System (ADS)

Work, Paul R.

1991-12-01

This thesis investigates the parallelization of existing serial programs in computational electromagnetics for use in a parallel environment. Existing algorithms for calculating the radar cross section of an object are covered, and a ray-tracing code is chosen for implementation on a parallel machine. Current parallel architectures are introduced and a suitable parallel machine is selected for the implementation of the chosen ray-tracing algorithm. The standard techniques for the parallelization of serial codes are discussed, including load balancing and decomposition considerations, and appropriate methods for the parallelization effort are selected. A load balancing algorithm is modified to increase the efficiency of the application, and a high level design of the structure of the serial program is presented. A detailed design of the modifications for the parallel implementation is also included, with both the high level and the detailed design specified in a high level design language called UNITY. The correctness of the design is proven using UNITY and standard logic operations. The theoretical and empirical results show that it is possible to achieve an efficient parallel application for a serial computational electromagnetic program where the characteristics of the algorithm and the target architecture critically influence the development of such an implementation.

Evolving Our Evaluation of Lighting Environments Project

NASA Technical Reports Server (NTRS)

Terrier, Douglas; Clayton, Ronald; Clark, Toni Anne

2016-01-01

Imagine you are an astronaut on their 100th day of your three year exploration mission. During your daily routine to the small hygiene compartment of the spacecraft, you realize that no matter what you do, your body blocks the light from the lamp. You can clearly see your hands or your toes but not both! What were those design engineers thinking! It would have been nice if they could have made the walls glow instead! The reason the designers were not more innovative is that their interpretation of the system lighting requirements didn't allow them to be so! Currently, our interior spacecraft lighting standards and requirements are written around the concept of a quantity of light illuminating a spacecraft surface. The natural interpretation for the engineer is that a lamp that throws light to the surface is required. Because of certification costs, only one lamp is designed and small rooms can wind up with lamps that may be inappropriate for the room architecture. The advances in solid state light emitting technologies and optics for lighting and visual communication necessitates the evaluation of how NASA envisions spacecraft lighting architectures and how NASA uses industry standards for the design and evaluation of lighting system. Current NASA lighting standards and requirements for existing architectures focus on the separate ability of a lighting system to throw light against a surface or the ability of a display system to provide the appropriate visual contrast. Realization that these systems can be integrated is not realized. The result is that the systems are developed independent from one another and potential efficiencies that could be realized from borrowing from the concept of one technology and applying it for the purpose of the other does not occur. This project investigated the possibility of incorporating large luminous surface lamps as an alternative or supplement to overhead lighting. We identified existing industry standards for architectural luminous or brightness uniformity as part of a lighting system definition. The efficiency of the surface lighting technology was evaluated for uniformity and power consumption. Finally, the team investigated possible performance savings if the walls were made to glow via a self luminous surface system instead of creating brightness by use of direct lighting of a highly reflective diffuse surface.

Stormwater Design Return Period Standards for U.S. Transportation Infrastructure: How Are States Approaching Resilience?

NASA Astrophysics Data System (ADS)

Samaras, C.; Lopez, T.

2016-12-01

Climate change is projected to increase the frequency and intensity of precipitation in many regions, which is relevant for stormwater engineering designs and resilience in the transportation sector. Existing and future stormwater infrastructure is generally designed for historical and stationary hydrologic conditions. For example, the design return period is based on statistical analysis of past precipitation events, often over a 50-year historical timeline. The design return period translates into how much peak precipitation volume a system is designed for in a state, and provides information about the performance of a drainage structure. The higher the design period used by an engineer for a given stormwater system, the more peak stormwater volume the system can convey. Therefore, design return periods can be associated with a design's near-term and long-term resilience. However, there is a tradeoff between the choice of design return period, the total infrastructure capital cost, and the resilience of a system to heavy precipitation events. This study analyzes current stormwater infrastructure design guidelines for state departments of transportation in the contiguous United States, in order to understand how stormwater design return periods vary across states and provide insight into the resilience of current stormwater systems design. The study found that the design return period varies considerably across the United States by roadway functional class and drainage classification, as well as within climate regions. Understanding this variation will help states identify possible vulnerabilities, highlight deficiencies across states and infrastructure types, and help in updating design return periods to increase the climate resilience of stormwater infrastructure.

HFE Process Guidance and Standards for potential application to updating NRC guidance

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jacques Hugo; J. J. Persensky

2012-07-01

The U.S. Nuclear Regulatory Commission (NRC) reviews and evaluates the human factors engineering (HFE) programs of applicants for nuclear power plant construction permits, operating licenses, standard design certifications, and combined operating licenses. The purpose of these safety reviews is to help ensure that personnel performance and reliability are appropriately supported. Detailed design review procedures and guidance for the evaluations is provided in three key documents: the Standard Review Plan (NUREG-0800), the HFE Program Review Model (NUREG-0711), and the Human-System Interface Design Review Guidelines (NUREG-0700). These documents were last revised in 2007, 2004 and 2002, respectively. The NRC is committed tomore » the periodic update and improvement of these guidance documents to ensure that they remain state-of-the-art design evaluation tools. Thus, the NRC has initiated a project with BNL to update the NRC guidance to remain current with recent research on human performance, advances in HFE methods and tools, and new technology. INL supported Brookhaven National Lab (BNL) to update the detailed HFE review criteria contained in NUREG-0711 and NUREG-0700 based on (1) feedback obtained from end users, (2) the results of NRC research and development efforts supporting the NRC staff’s HFE safety reviews, and (3) other material the project staff identify as applicable to the update effort. INL submitted comments on development plans and sections of NUREGs 0800, 0711, and 0700. The contractor prepared the report attached here as the deliverable for this work.« less

Sample size requirements for separating out the effects of combination treatments: Randomised controlled trials of combination therapy vs. standard treatment compared to factorial designs for patients with tuberculous meningitis

PubMed Central

2011-01-01

Background In certain diseases clinical experts may judge that the intervention with the best prospects is the addition of two treatments to the standard of care. This can either be tested with a simple randomized trial of combination versus standard treatment or with a 2 × 2 factorial design. Methods We compared the two approaches using the design of a new trial in tuberculous meningitis as an example. In that trial the combination of 2 drugs added to standard treatment is assumed to reduce the hazard of death by 30% and the sample size of the combination trial to achieve 80% power is 750 patients. We calculated the power of corresponding factorial designs with one- to sixteen-fold the sample size of the combination trial depending on the contribution of each individual drug to the combination treatment effect and the strength of an interaction between the two. Results In the absence of an interaction, an eight-fold increase in sample size for the factorial design as compared to the combination trial is required to get 80% power to jointly detect effects of both drugs if the contribution of the less potent treatment to the total effect is at least 35%. An eight-fold sample size increase also provides a power of 76% to detect a qualitative interaction at the one-sided 10% significance level if the individual effects of both drugs are equal. Factorial designs with a lower sample size have a high chance to be underpowered, to show significance of only one drug even if both are equally effective, and to miss important interactions. Conclusions Pragmatic combination trials of multiple interventions versus standard therapy are valuable in diseases with a limited patient pool if all interventions test the same treatment concept, it is considered likely that either both or none of the individual interventions are effective, and only moderate drug interactions are suspected. An adequately powered 2 × 2 factorial design to detect effects of individual drugs would require at least 8-fold the sample size of the combination trial. Trial registration Current Controlled Trials ISRCTN61649292 PMID:21288326

Development of a flexible microfluidic system integrating magnetic micro-actuators for trapping biological species

NASA Astrophysics Data System (ADS)

Fulcrand, R.; Jugieu, D.; Escriba, C.; Bancaud, A.; Bourrier, D.; Boukabache, A.; Gué, A. M.

2009-10-01

A flexible microfluidic system embedding microelectromagnets has been designed, modeled and fabricated by using a photosensitive resin as structural material. The fabrication process involves the integration of micro-coils in a multilayer SU-8 microfluidic system by combining standard electroplating and dry films lamination. This technique offers numerous advantages in terms of integration, biocompatibility and chemical resistance. Various designs of micro-coils, including spiral, square or serpentine wires, have been simulated and experimentally tested. It has been established that thermal dissipation in micro-coils depends strongly on the number of turns and current density but remains compatible with biological applications. Real-time experimentations show that these micro-actuators are efficient in trapping magnetic micro-beads without any external field source or a permanent magnet and highlight that the size of microfluidic channels has been adequately designed for optimal trapping. Moreover, we trap magnetic beads in less than 2 s and release them instantaneously into the micro-channel. The actuation solely relies on electric fields, which are easier to control than standard magneto-fluidic modules.

A systematic review of interventions to increase the use of standardized outcome measures by rehabilitation professionals.

PubMed

Colquhoun, Heather L; Lamontagne, Marie-Eve; Duncan, Edward As; Fiander, Michelle; Champagne, Catherine; Grimshaw, Jeremy M

2017-03-01

To determine the types and effectiveness of interventions to increase the knowledge about, attitudes towards, and use of standardized outcome measures in rehabilitation professionals. An electronic search using Medline, EMBASE, PsycINFO, CINAHL, Ergonomics Abstracts, Sports Discus. The search is current to February 2016. All study designs testing interventions were included as were all provider and patient types. Two reviewers independently conducted a title and abstract review, followed by a full-text review. Two reviewers independently extracted a priori variables and used consensus for disagreements. Quality assessment was conducted using the Assessment of Quantitative Studies published by the Effective Public Health Practice Group. We identified 11 studies involving at least 1200 providers. Nine of the studies showed improvements in outcome measure use rates but only three of these studies used an experimental or quasi-experimental design. Eight of the studies used an educational approach in the intervention and three used audit and feedback. Poor intervention description and quality of studies limited recommendations. Increased attention to testing interventions focused on known barriers, matched to behavior change techniques, and with stronger designs is warranted.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Goldsmith, Steven Y.; Spires, Shannon V.

There are currently two proposed standards for agent communication languages, namely, KQML (Finin, Lobrou, and Mayfield 1994) and the FIPA ACL. Neither standard has yet achieved primacy, and neither has been evaluated extensively in an open environment such as the Internet. It seems prudent therefore to design a general-purpose agent communications facility for new agent architectures that is flexible yet provides an architecture that accepts many different specializations. In this paper we exhibit the salient features of an agent communications architecture based on distributed metaobjects. This architecture captures design commitments at a metaobject level, leaving the base-level design and implementationmore » up to the agent developer. The scope of the metamodel is broad enough to accommodate many different communication protocols, interaction protocols, and knowledge sharing regimes through extensions to the metaobject framework. We conclude that with a powerful distributed object substrate that supports metaobject communications, a general framework can be developed that will effectively enable different approaches to agent communications in the same agent system. We have implemented a KQML-based communications protocol and have several special-purpose interaction protocols under development.« less

NASA's Man-Systems Integration Standards: A Human Factors Engineering Standard for Everyone in the Nineties

NASA Technical Reports Server (NTRS)

Booher, Cletis R.; Goldsberry, Betty S.

1994-01-01

During the second half of the 1980s, a document was created by the National Aeronautics and Space Administration (NASA) to aid in the application of good human factors engineering and human interface practices to the design and development of hardware and systems for use in all United States manned space flight programs. This comprehensive document, known as NASA-STD-3000, the Man-Systems Integration Standards (MSIS), attempts to address, from a human factors engineering/human interface standpoint, all of the various types of equipment with which manned space flight crew members must deal. Basically, all of the human interface situations addressed in the MSIS are present in terrestrially based systems also. The premise of this paper is that, starting with this already created standard, comprehensive documents addressing human factors engineering and human interface concerns could be developed to aid in the design of almost any type of equipment or system which humans interface with in any terrestrial environment. Utilizing the systems and processes currently in place in the MSIS Development Facility at the Johnson Space Center in Houston, TX, any number of MSIS volumes addressing the human factors / human interface needs of any terrestrially based (or, for that matter, airborne) system could be created.

Enhanced Oceanic Operations Human-In-The-Loop In-Trail Procedure Validation Simulation Study

NASA Technical Reports Server (NTRS)

Murdoch, Jennifer L.; Bussink, Frank J. L.; Chamberlain, James P.; Chartrand, Ryan C.; Palmer, Michael T.; Palmer, Susan O.

2008-01-01

The Enhanced Oceanic Operations Human-In-The-Loop In-Trail Procedure (ITP) Validation Simulation Study investigated the viability of an ITP designed to enable oceanic flight level changes that would not otherwise be possible. Twelve commercial airline pilots with current oceanic experience flew a series of simulated scenarios involving either standard or ITP flight level change maneuvers and provided subjective workload ratings, assessments of ITP validity and acceptability, and objective performance measures associated with the appropriate selection, request, and execution of ITP flight level change maneuvers. In the majority of scenarios, subject pilots correctly assessed the traffic situation, selected an appropriate response (i.e., either a standard flight level change request, an ITP request, or no request), and executed their selected flight level change procedure, if any, without error. Workload ratings for ITP maneuvers were acceptable and not substantially higher than for standard flight level change maneuvers, and, for the majority of scenarios and subject pilots, subjective acceptability ratings and comments for ITP were generally high and positive. Qualitatively, the ITP was found to be valid and acceptable. However, the error rates for ITP maneuvers were higher than for standard flight level changes, and these errors may have design implications for both the ITP and the study's prototype traffic display. These errors and their implications are discussed.

User's manual for rocket combustor interactive design (ROCCID) and analysis computer program. Volume 2: Appendixes A-K

NASA Technical Reports Server (NTRS)

Muss, J. A.; Nguyen, T. V.; Johnson, C. W.

1991-01-01

The appendices A-K to the user's manual for the rocket combustor interactive design (ROCCID) computer program are presented. This includes installation instructions, flow charts, subroutine model documentation, and sample output files. The ROCCID program, written in Fortran 77, provides a standardized methodology using state of the art codes and procedures for the analysis of a liquid rocket engine combustor's steady state combustion performance and combustion stability. The ROCCID is currently capable of analyzing mixed element injector patterns containing impinging like doublet or unlike triplet, showerhead, shear coaxial and swirl coaxial elements as long as only one element type exists in each injector core, baffle, or barrier zone. Real propellant properties of oxygen, hydrogen, methane, propane, and RP-1 are included in ROCCID. The properties of other propellants can be easily added. The analysis models in ROCCID can account for the influences of acoustic cavities, helmholtz resonators, and radial thrust chamber baffles on combustion stability. ROCCID also contains the logic to interactively create a combustor design which meets input performance and stability goals. A preliminary design results from the application of historical correlations to the input design requirements. The steady state performance and combustion stability of this design is evaluated using the analysis models, and ROCCID guides the user as to the design changes required to satisfy the user's performance and stability goals, including the design of stability aids. Output from ROCCID includes a formatted input file for the standardized JANNAF engine performance prediction procedure.

Agent Based Simulation Design for Aggregation and Disaggregation

DTIC Science & Technology

2011-12-01

of law, no person shall be subject to a penalty for failing to comply with a collection of information if it does not display a currently valid OMB... PERSON a. REPORT unclassified b. ABSTRACT unclassified c. THIS PAGE unclassified Standard Form 298 (Rev. 8-98) Prescribed by ANSI Std Z39-18...theo- retical analysis) finding conditions under which aggregation equations might be reasonably valid (requires theo- retical analysis

Environmental Assessment: Proposed Automotive/Arts and Crafts Skills Center, Hill Air Force Base, Utah

DTIC Science & Technology

2010-10-14

Water regarding potential sources of t practices to ensure drinking water source protection. u ity design and operating standards would be based...center would not be constructed, and adequate facilities would not be provided. The existing facility would operate as it currently exists...would be properly handled during the construction process. Operational activities would generate the same types of waste as the existing facility

A Combination Therapy of JO-I and Chemotherapy in Ovarian Cancer Models

DTIC Science & Technology

2013-10-01

which consists of a 3PAR storage backend and is sharing data via a highly available NetApp storage gateway and 2 high throughput commodity storage...Environment is configured as self- service Enterprise cloud and currently hosts more than 700 virtual machines. The network infrastructure consists of...technology infrastructure and information system applications designed to integrate, automate, and standardize operations. These systems fuse state of

Comparison of current ATDs with Chinese adults in anthropometry.

PubMed

Cao, Libo; Zhang, Kai; Lv, Xin; Yan, Lingbo

2016-05-18

Crash test dummies are full-scale anthropomorphic test devices (ATDs) that simulate the dimensions, weight proportions, and articulation of the human body and are used to measure human injury potential in vehicle crashes. The Hybrid III dummy family, which is widely used currently, takes selected percentiles of anthropometry dimensions of U.S. adults as design references. The objective of this study was to assess the difference in anthropometry between Chinese adults and the currently used dummy. Based on the Chinese National Physical Fitness Surveillance of the year 2000, 2005, 2010 and National Standard of China GB/T 10000-1988, a series of anthropometric parameters for Chinese adults were obtained, and data analysis was conducted between Chinese adults and ATDs that are currently used. The comparison revealed distinct anthropometric difference between ATDs and Chinese adults. Based on the latest data, median Chinese females were about 2.6% lower in stature and about 8.03% lower in body weight than the ATD design targets. Similarly, median Chinese males were about 3.48% shorter and weighed 11.89% less than the ATD design targets. Although the anthropometric differences between Chinese adults and the Hybrid III ATD specifications were modest and growing smaller, it is advisable to take the differences in anthropometry between ATDs and Chinese adults into consideration when developing new vehicles in China to provide effective protection specifically for Chinese occupants.

Low rates of recurrence after successful treatment of multidrug-resistant tuberculosis in Tomsk, Russia.

PubMed

Gelmanova, I Y; Ahmad Khan, F; Becerra, M C; Zemlyanaya, N A; Unakova, I A; Andreev, Y G; Berezina, V I; Pavlova, V E; Shin, S; Yedilbayev, A B; Krasnov, V A; Keshavjee, S

2015-04-01

Tomsk, Russia, where multidrug-resistant tuberculosis (MDR-TB) is prevalent. To report rates of recurrence following successful treatment of MDR-TB in a program providing individualized treatment regimens designed according to the current global standard of care. A retrospective cohort study of 408 adults successfully treated for pulmonary MDR-TB from 10 September 2000 to 1 November 2004, and followed for up to 6 years post-treatment. We used Poisson regression with generalized estimating equations to assess whether recurrence rates changed significantly with time. We analyzed 399 (97.5%) patients with at least one follow-up visit (15 850 person-months of observation [PMO]). Baseline resistance to second-line drugs was common (65.2%); 398 patients (99.7%) were human immunodeficiency virus (HIV) negative. In the first year of post-treatment follow-up, there were six episodes of recurrence (1.4/1000 PMO, 95%CI 0.5-3.0). After the first post-treatment year, there were 21 episodes of recurrence (1.8/1000 PMO, 95%CI 1.1-2.8). The rate did not change significantly with time. Individualized regimens designed according to the current global standard of care achieved low rates of MDR-TB recurrence among non-HIV-infected persons treated in a programmatic setting.

3D unstructured-mesh radiation transport codes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Morel, J.

1997-12-31

Three unstructured-mesh radiation transport codes are currently being developed at Los Alamos National Laboratory. The first code is ATTILA, which uses an unstructured tetrahedral mesh in conjunction with standard Sn (discrete-ordinates) angular discretization, standard multigroup energy discretization, and linear-discontinuous spatial differencing. ATTILA solves the standard first-order form of the transport equation using source iteration in conjunction with diffusion-synthetic acceleration of the within-group source iterations. DANTE is designed to run primarily on workstations. The second code is DANTE, which uses a hybrid finite-element mesh consisting of arbitrary combinations of hexahedra, wedges, pyramids, and tetrahedra. DANTE solves several second-order self-adjoint forms of the transport equation including the even-parity equation, the odd-parity equation, and a new equation called the self-adjoint angular flux equation. DANTE also offers three angular discretization options:more » $$S{_}n$$ (discrete-ordinates), $$P{_}n$$ (spherical harmonics), and $$SP{_}n$$ (simplified spherical harmonics). DANTE is designed to run primarily on massively parallel message-passing machines, such as the ASCI-Blue machines at LANL and LLNL. The third code is PERICLES, which uses the same hybrid finite-element mesh as DANTE, but solves the standard first-order form of the transport equation rather than a second-order self-adjoint form. DANTE uses a standard $$S{_}n$$ discretization in angle in conjunction with trilinear-discontinuous spatial differencing, and diffusion-synthetic acceleration of the within-group source iterations. PERICLES was initially designed to run on workstations, but a version for massively parallel message-passing machines will be built. The three codes will be described in detail and computational results will be presented.« less

Leveraging Current Initiatives to Bring Earth and Space Science into Elementary and Early Childhood Classrooms: NGSS in the Context of the Classroom Technology Push

NASA Astrophysics Data System (ADS)

Pacheco-Guffrey, H. A.

2016-12-01

Classroom teachers face many challenges today such as new standards, the moving targets of high stakes tests and teacher evaluations, inconsistent/insufficient access to resources and evolving education policies. Science education in the K-5 context is even more complex. NGSS can be intimidating, especially to K-5 educators with little science background. High stakes science tests are slow to catch up with newly drafted state level science standards, leaving teachers unsure about what to change and when to implement updated standards. Amid all this change, many schools are also piloting new technology programs. Though exciting, tech initiatives can also be overwhelming to teachers who are already overburdened. A practical way to support teachers in science while remaining mindful of these stressors is to design and share resources that leverage other K-5 school initiatives. This is often done by integrating writing or math into science learning to meet Common Core requirements. This presentation will suggest a method for bringing Earth and space science learning into elementary / early childhood classrooms by utilizing the current push for tablet technology. The goal is to make science integration reasonable by linking it to technology programs that are in their early stages. The roles and uses of K-5 Earth and space science apps will be examined in this presentation. These apps will be linked to NGSS standards as well as to the science and engineering practices. To complement the app resources, two support frameworks will also be shared. They are designed to help educators consider new technologies in the context of their own classrooms and lessons. The SAMR Model (Puentadura, 2012) is a conceptual framework that helps teachers think critically about the means and purposes of integrating technology into existing lessons. A practical framework created by the author will also be shared. It is designed to help teachers identify and address the important logistical and curricular decision-making aspects of integrating technology into K-5 classroom science. This method provides clear applications for new technology while also bringing meaningful Earth and space science learning into K-5 classrooms.

Korean standard nuclear plant ex-vessel neutron dosimetry program Ulchin 4

DOE Office of Scientific and Technical Information (OSTI.GOV)

Duo, J.I.; Chen, J.; Kulesza, J.A.

2011-07-01

A comprehensive ex-vessel neutron dosimetry (EVND) surveillance program has been deployed in 16 pressurized water reactors (PWR) in South Korea and EVND dosimetry sets have already been installed and analyzed in Westinghouse reactor designs. In this paper, the unique features of the design, training, and installation in the Korean standard nuclear plant (KSNP) Ulchin Unit 4 are presented. Ulchin Unit 4 Cycle 9 represents the first dosimetry analyzed from the EVND design deployed in KSNP plants: Yonggwang Units 3 through 6 and Ulchin Units 3 through 6. KSNP's cavity configuration precludes a conventional installation from the cavity floor. The solution,more » requiring the installation crew to access the cavity at an elevation of the active core, places a premium on rapid installation due to high area dose rates. Numerous geometrical features warranted the use of a detailed design in true 3D mechanical design software to control interferences. A full-size training mockup maximized the crew ability to correctly install the instrument in minimum time. The analysis of the first dosimetry set shows good agreements between measurement and calculation within the associated uncertainties. A complete EVND system has been successfully designed, installed, and analyzed for a KNSP plant. Current and future EVND analyses will continue supporting the successful operation of PWR units in South Korea. (authors)« less

Measurement system for determination of current-voltage characteristics of PV modules

NASA Astrophysics Data System (ADS)

Idzkowski, Adam; Walendziuk, Wojciech; Borawski, Mateusz; Sawicki, Aleksander

2015-09-01

The realization of a laboratory stand for testing photovoltaic panels is presented here. The project of the laboratory stand was designed in SolidWorks software. The aim of the project was to control the electrical parameters of a PV panel. For this purpose a meter that measures electrical parameters i.e. voltage, current and power, was realized. The meter was created with the use of LabJack DAQ device and LabVIEW software. The presented results of measurements were obtained in different conditions (variable distance from the source of light, variable tilt angle of the panel). Current voltage characteristics of photovoltaic panel were created and all parameters could be detected in different conditions. The standard uncertainties of sample voltage, current, power measurements were calculated. The paper also gives basic information about power characteristics and efficiency of a solar cell.

Community participation to design rural primary healthcare services.

PubMed

Farmer, Jane; Nimegeer, Amy

2014-03-21

This paper explores how community participation can be used in designing rural primary healthcare services by describing a study of Scottish communities. Community participation is extolled in healthcare policy as useful in planning services and is understood as particularly relevant in rural settings, partly due to high social capital. Literature describes many community participation methods, but lacks discussion of outcomes relevant to health system reconfiguration. There is a spectrum of ideas in the literature on how to design services, from top-down standard models to contextual plans arising from population health planning that incorporates community participation. This paper addresses an evidence gap about the outcomes of using community participation in (re)designing rural community health services. Community-based participatory action research was applied in four Scottish case study communities in 2008-10. Data were collected from four workshops held in each community (total 16) and attended by community members. Workshops were intended to produce hypothetical designs for future service provision. Themes, rankings and selections from workshops are presented. Community members identified consistent health priorities, including local practitioners, emergency triage, anticipatory care, wellbeing improvement and health volunteering. Communities designed different service models to address health priorities. One community did not design a service model and another replicated the current model despite initial enthusiasm for innovation. Communities differ in their receptiveness to engaging in innovative service design, but some will create new models that fit in a given budget. Design diversity indicates that context influences local healthcare planning, suggesting community participation impacts on design outcomes, but standard service models maybe useful as part of the evidence in community participation discussions.

Summary Report for the Technical Interchange Meeting on Development of Baseline Material Properties and Design Guidelines for In-Space Manufacturing Activities

NASA Technical Reports Server (NTRS)

Prater, T. J.; Bean, Q. A.; Werkheiser, N. J.; Johnston, M. M.; Ordonez, E. A.; Ledbetter, F. E.; Risdon, D. L.; Stockman, T. J.; Sandridge, S. K. R.; Nelson, G. M.

2016-01-01

NASA Marshall Space Flight Center (MSFC) and the Agency as a whole are currently engaged in a number of in-space manufacturing (ISM) activities that have the potential to reduce launch costs, enhance crew safety, and provide the capabilities needed to undertake long-duration spaceflight. The recent 3D Printing in Zero-G experiment conducted on board the International Space Station (ISS) demonstrated that parts of acrylonitrile butadiene styrene (ABS) plastic can be manufactured in microgravity using fused deposition modeling (FDM). This project represents the beginning of the development of a capability that is critical to future NASA missions. Current and future ISM activities will require the development of baseline material properties to facilitate design, analysis, and certification of materials manufactured using in-space techniques. The purpose of this technical interchange meeting (TIM) was to bring together MSFC practitioners and experts in materials characterization and development of baseline material properties for emerging technologies to advise the ISM team as we progress toward the development of material design values, standards, and acceptance criteria for materials manufactured in space. The overall objective of the TIM was to leverage MSFC's shared experiences and collective knowledge in advanced manufacturing and materials development to construct a path forward for the establishment of baseline material properties, standards development, and certification activities related to ISM. Participants were asked to help identify research and development activities that will (1) accelerate acceptance and adoption of ISM techniques among the aerospace design community; (2) benefit future NASA programs, commercial technology developments, and national needs; and (3) provide opportunities and avenues for further collaboration.

76 FR 17160 - Office of New Reactors; Final Interim Staff Guidance on the Review of Nuclear Power Plant Designs...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-28

...The NRC staff is issuing its Final Interim Staff Guidance (ISG) DC/COL-ISG-021 titled ``Interim Staff Guidance on the Review of Nuclear Power Plant Designs Using a Gas Turbine Driven Standby Emergency Alternating Current Power System,'' Agencywide Documents Access and Management System (ADAMS) Accession No. ML102510119 for DC/ COL-ISG-021 and ADAMS Accession No. ML102510164 for Attachment 1 to DC/ COL-ISG-021. This ISG provides new guidance for applicants submitting a combined license (COL) or design certification (DC) application for new nuclear power reactors under Title 10 of the Code of Federal Regulations, part 52. In addition, it supplements the guidance provided to the NRC staff in NUREG-0800, ``Standard Review Plan for the Review of Safety Analysis Reports for Nuclear Power Plants,'' March 2007, Standard Review Plan (SRP), Section 8.3.1 and Sections 9.5.4 through 9.5.8. The NRC staff issues DC/COL-ISGs to facilitate activities associated with NRC review of applications for DCs and COLs. The NRC staff intends to incorporate DC/COL-ISG-021 into the next revision of SRP Section 8.3.1 and Sections 9.5.4 through 9.5.8 and Regulatory Guide 1.206, ``Combined License Applications for Nuclear Power Plants (LWR Edition),'' June 2007. Disposition: On February 3, 2010, the NRC staff issued proposed DC/ COL-ISG-021 on ``Review of Nuclear Power Plant Designs Using a Gas Turbine Driven Standby Emergency Alternating Current Power System,'' ADAMS Accession No. ML092640035. The NRC staff received comments on the proposed guidance. This final issuance resolves the majority of the comments. The NRC staff responses to these comments can be found in ADAMS Accession No. ML102510176.

Updated Design Standards and Guidance from the What Works Clearinghouse: Regression Discontinuity Designs and Cluster Designs

ERIC Educational Resources Information Center

Cole, Russell; Deke, John; Seftor, Neil

2016-01-01

The What Works Clearinghouse (WWC) maintains design standards to identify rigorous, internally valid education research. As education researchers advance new methodologies, the WWC must revise its standards to include an assessment of the new designs. Recently, the WWC has revised standards for two emerging study designs: regression discontinuity…

Low cost paths to binary optics

NASA Technical Reports Server (NTRS)

Nelson, Arthur; Domash, Lawrence

1993-01-01

Application of binary optics has been limited to a few major laboratories because of the limited availability of fabrication facilities such as e-beam machines and the lack of standardized design software. Foster-Miller has attempted to identify low cost approaches to medium-resolution binary optics using readily available computer and fabrication tools, primarily for the use of students and experimenters in optical computing. An early version of our system, MacBEEP, made use of an optimized laser film recorder from the commercial typesetting industry with 10 micron resolution. This report is an update on our current efforts to design and build a second generation MacBEEP, which aims at 1 micron resolution and multiple phase levels. Trails included a low cost scanning electron microscope in microlithography mode, and alternative laser inscribers or photomask generators. Our current software approach is based on Mathematica and PostScript compatibility.

Vertical Motion Simulator Experiment on Stall Recovery Guidance

NASA Technical Reports Server (NTRS)

Schuet, Stefan; Lombaerts, Thomas; Stepanyan, Vahram; Kaneshige, John; Shish, Kimberlee; Robinson, Peter; Hardy, Gordon H.

2017-01-01

A stall recovery guidance system was designed to help pilots improve their stall recovery performance when the current aircraft state may be unrecognized under various complicating operational factors. Candidate guidance algorithms were connected to the split-cue pitch and roll flight directors that are standard on large transport commercial aircraft. A new thrust guidance algorithm and cue was also developed to help pilots prevent the combination of excessive thrust and nose-up stabilizer trim. The overall system was designed to reinforce the current FAA recommended stall recovery procedure. A general transport aircraft model, similar to a Boeing 757, with an extended aerodynamic database for improved stall dynamics simulation fidelity was integrated into the Vertical Motion Simulator at NASA Ames Research Center. A detailed study of the guidance system was then conducted across four stall scenarios with 30 commercial and 10 research test pilots, and the results are reported.

Quality management for the international transport of laboratory animals.

PubMed

Leary, Steven L

2008-01-01

Increased collaboration between investigators at different institutions has increased the number of laboratory animals being transported. The current system of laws and regulations governing animal shipments is inconsistent and government agencies often have areas of overlapping regulatory management. Furthermore, the lack of industry-wide shipping standards and good practices contributes to confusion among those responsible for shipment. One answer to these quality control issues would be the establishment of independent, industry-regulated 'good practices' for animal transport, similar to those used in laboratories for experimental design. These good practices could be based on the existing International Air Transport Association Live Animals Regulations, with contributions from representatives of the specialties involved. Additionally, quality control under the current system of patchwork regulations could be improved if each institution, both academic and commercial, would designate a single point of contact to follow each shipment from start to finish.

Impulse Current Waveform Compliance with IEC 60060-1

NASA Astrophysics Data System (ADS)

Sato, Shuji; Harada, Tatsuya; Yokoyama, Taizou; Sakaguchi, Sumiko; Ebana, Takao; Saito, Tatsunori

After numerous simulations, authors could unsuccessfully design an impulse current calibrator, whose output's time parameters (front time, T1 and time to half the peak, T2 ) are quite close to ideals defined in IEC 60060-1. The investigation for the failed trial was commenced. Using normalized damped oscillating waveform e-tsin(ωt), a relationship of the ratio T2/T1 and undershoot value are studied for all possible value for . With this relationship, it is derived that 1) one cannot generate an ideal wave form unless one has to accept a certain margin for the two parameters, 2) even with the allowable margin, one can generate a wave form only in a case a value for T1 is smaller and T2 is larger than standard values. In the paper, possible time parameter combination, which fulfils IEC 60060-1 requirements, is illustrated for a calibrator design.

User-Defined Data Distributions in High-Level Programming Languages

NASA Technical Reports Server (NTRS)

Diaconescu, Roxana E.; Zima, Hans P.

2006-01-01

One of the characteristic features of today s high performance computing systems is a physically distributed memory. Efficient management of locality is essential for meeting key performance requirements for these architectures. The standard technique for dealing with this issue has involved the extension of traditional sequential programming languages with explicit message passing, in the context of a processor-centric view of parallel computation. This has resulted in complex and error-prone assembly-style codes in which algorithms and communication are inextricably interwoven. This paper presents a high-level approach to the design and implementation of data distributions. Our work is motivated by the need to improve the current parallel programming methodology by introducing a paradigm supporting the development of efficient and reusable parallel code. This approach is currently being implemented in the context of a new programming language called Chapel, which is designed in the HPCS project Cascade.