The Development of Strategy Use in Elementary School Children: Working Memory and Individual Differences

ERIC Educational Resources Information Center

Imbo, Ineke; Vandierendonck, Andre

2007-01-01

The current study tested the development of working memory involvement in children's arithmetic strategy selection and strategy efficiency. To this end, an experiment in which the dual-task method and the choice/no-choice method were combined was administered to 10- to 12-year-olds. Working memory was needed in retrieval, transformation, and…

Current Status and Future Agenda for the Theory, Research, and Practice of Childhood Career Development

ERIC Educational Resources Information Center

Schultheiss, Donna E. Palladino

2008-01-01

This article reviews the current status and a future agenda for childhood career development theory, research, and practice. The fragmented nature of the current state of the literature is noted, and a call is made for a reexamination and reconsideration of the childhood developmental pathways of life's work. It is suggested that the study of…

An examination of retention factors among registered nurses in Northeastern Ontario, Canada: Nurses intent to stay in their current position.

PubMed

Nowrouzi, Behdin; Rukholm, Ellen; Lariviere, Michel; Carter, Lorraine; Koren, Irene; Mian, Oxana; Giddens, Emilia

2016-03-10

The purpose of the study was to examine factors related to the retention of registered nurses in northeastern Ontario, Canada. A cross-sectional survey of registered nurses working in northeastern Ontario, Canada was conducted. Logistic regression analyses were used to consider intent to stay in current employment in relation to the following: 1) demographic factors, and 2) occupation and career satisfaction factors. A total of 459 (29.8% response rate) questionnaires were completed. The adjusted odds logistic regression analysis of RNs who intended to remain in their current position for the next five years, demonstrated that respondents in the 46 to 56 age group (OR: 2.65; 95% CI: 1.50 to 4.69), the importance of staff development in the organization (OR: 3.04; 95% CI: 1.13 to 8.13) northeastern Ontario lifestyle (OR: 2.61; 95% CI: 1.55 to 4.40), working in nursing for 14 to 22.5 years (OR: 2.55; 95% CI: 1.10 to 5.93), and working between 0 to 1 hour of overtime per week (OR: 1.20; 95% CI: 1.20 to 4.64) were significant factors in staying in their current position for the next five years. This study shows that a further understanding of the work environment could assist with developing retention for rural nurses. Furthermore, employers may use such information to ameliorate the working conditions of nurses, while researchers may use such evidence to develop interventions that are applicable to improving the working conditions of nurses.

Professional Development Capacity Building in Pennsylvania's Regional Staff Development Program: The "WorkNet" Project. Final Report [and] WorkNet Workplace Literacy Trainer's Guide.

ERIC Educational Resources Information Center

Carman, Priscilla S.

These two documents are products of a project to improve the capability of the Pennsylvania Regional Staff Development Centers to provide current, research-based workplace literacy training and technical assistance to adult basic and literacy education programs. The final report describes these project activities: development of training materials…

Gaining Control of Occupational Injury and Illness in the U.S. Navy Civilian Work Force

DTIC Science & Technology

1990-01-16

developing survey instruments, interviews were conducted with key participants at the naval shipyards, naval public works center, naval air repair...currently in place at naval shipyards. After compiling data on those processes, NAVCAMPRO was developed in an effort to take control of the management of...physician. The attending physician participates with the physical therapist and supervisor in the development of a work -hardening program for the

Assessing the Value: Work-Based Learning Placements for Post-Graduate Human Resource Development Students?

ERIC Educational Resources Information Center

Morse, Shona M.

2006-01-01

Purpose: The objective of the pilot study reported on here was to identify some of the more elusive "costs and benefits" of work-based learning (WBL) placements. This was addressed by exploring the views and experience of a small number of human resource development (HRD) professionals who currently offer supervised work-based learning placements…

Regulatory Technology Development Plan - Sodium Fast Reactor. Mechanistic Source Term - Trial Calculation. Work Plan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Grabaskas, David; Bucknor, Matthew; Jerden, James

2016-02-01

The overall objective of the SFR Regulatory Technology Development Plan (RTDP) effort is to identify and address potential impediments to the SFR regulatory licensing process. In FY14, an analysis by Argonne identified the development of an SFR-specific MST methodology as an existing licensing gap with high regulatory importance and a potentially long lead-time to closure. This work was followed by an initial examination of the current state-of-knowledge regarding SFR source term development (ANLART-3), which reported several potential gaps. Among these were the potential inadequacies of current computational tools to properly model and assess the transport and retention of radionuclides duringmore » a metal fuel pool-type SFR core damage incident. The objective of the current work is to determine the adequacy of existing computational tools, and the associated knowledge database, for the calculation of an SFR MST. To accomplish this task, a trial MST calculation will be performed using available computational tools to establish their limitations with regard to relevant radionuclide release/retention/transport phenomena. The application of existing modeling tools will provide a definitive test to assess their suitability for an SFR MST calculation, while also identifying potential gaps in the current knowledge base and providing insight into open issues regarding regulatory criteria/requirements. The findings of this analysis will assist in determining future research and development needs.« less

Developing Area of Concrete Pavements and Transportation Structures

DOT National Transportation Integrated Search

2009-05-01

The objectives are: analyze scope of work currently performed by the Bureau of Materials, and understand , based on facts available, current mission of the Bureau of Materials; to understand past and current tasks performed by CAIT for NJDOT and to e...

Adjunct Experiences with and Perceptions of Professional Development at a Texas Community College

ERIC Educational Resources Information Center

Miles, R. Mark

2017-01-01

Universities and colleges have developed an over-reliance on adjunct faculty, and as a result, researchers have begun to study adjunct faculty satisfaction as it relates to their working conditions. Current research indicates that professional development is a source that can contribute to satisfaction at work (Hoyt, 2012). However, the research…

Learning Strategies at Work and Professional Development

ERIC Educational Resources Information Center

Haemer, Hannah Deborah; Borges-Andrade, Jairo Eduardo; Cassiano, Simone Kelli

2017-01-01

Purpose: This paper aims to investigate the prediction of current and evolutionary perceptions of professional development through five learning strategies at work and through training and how individual and job characteristics predict those strategies. Design/methodology/approach: Variables were measured in a cross-sectional survey, with 962…

Development of a Work Control System for Propulsion Testing at Stennis Space Center (SSC)

NASA Technical Reports Server (NTRS)

Messer, Elizabeth A.

2004-01-01

In 1996, Stennis Space Center was given management authority for all Propulsion Testing for NASA. Over the next few years several research and development (R&D) test facilities were completed and brought up to full operation in what is known as the E-Complex Test Facility at Stennis Space Center. This paper will explain the requirements and steps taken to develop the current Test Operations' electronic work control system. The Work Control System developed includes work authorization documents such as test preparation sheets, discrepancy reports, pre-test briefing reports, and test requests.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Blom, Philip Stephen; Marcillo, Omar Eduardo; Euler, Garrett Gene

InfraPy is a Python-based analysis toolkit being development at LANL. The algorithms are intended for ground-based nuclear detonation detection applications to detect, locate, and characterize explosive sources using infrasonic observations. The implementation is usable as a stand-alone Python library or as a command line driven tool operating directly on a database. With multiple scientists working on the project, we've begun using a LANL git repository for collaborative development and version control. Current and planned work on InfraPy focuses on the development of new algorithms and propagation models. Collaboration with Southern Methodist University (SMU) has helped identify bugs and limitations ofmore » the algorithms. The current focus of usage development is focused on library imports and CLI.« less

Development of a remote vital signs sensor

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ladd, M.D.; Pacheco, M.S.; Rivas, R.R.

1997-06-01

This paper describes the work at Sandia National Laboratories to develop sensors that remotely detect unique life-form characteristics, such as breathing patterns or heartbeat patterns. This paper will address the Technical Support Working Group`s (TSWG) objective: to develop a remote vital signs detector which can be used to assess someone`s malevolent intent. The basic concept of operations for the projects, system development issues, and the preliminary results for a radar device currently in-house and the implications for implementation are described. A survey that identified the in-house technology currently being evaluated is reviewed, as well as ideas for other potential technologiesmore » to explore. A radar unit for breathing and heartbeat detection is being tested, and the applicability of infrared technology is being explored. The desire for rapid prototyping is driving the need for off-the-shelf technology. As a conclusion, current status and future directions of the effort are reviewed.« less

Creative Environment Formation in Design Professional Training

ERIC Educational Resources Information Center

Zakirova, Venera G.; Purik, Elza E.

2016-01-01

The current interest to the issue of this work lies in the fact that a professional competence of a designer needs highly developed abilities to create new and different projects of high aesthetic value in compliance with the current regulations. Image visualization abilities development needs special conditions encouraging personal creativity.…

Work-Life Balance: Beyond the Rhetoric. IES Report.

ERIC Educational Resources Information Center

Kodz, J.; Harper, H.; Dench, S.

The current status of British policy and practice related to work-life balance was examined through case studies of six organizations identified as having well-developed work-life balance and flexible working practices. Interviews were conducted with human resource (HR) managers at all six organizations, and interviews and focus group discussions…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rich, B.L.

Measurements of beta and/or nonpenetrating exposure results is complicated and past techniques and capabilities have resulted in significant inaccuracies in recorded results. Current developments have resulted in increased capabilities which make the results more accurate and should result in less total exposure to the work force. Continued development of works in progress should provide equivalent future improvements.

Using Coaching as a Professional Development Modality to Train Teachers in the Use of Evidence-Based Practices for Students with Autism Spectrum Disorders

ERIC Educational Resources Information Center

Hollins, Samantha Marsh

2013-01-01

Professional development for teachers currently working in the classroom is an important focus of educational programs and school systems. Continuous professional development is especially important for special education teachers to maintain current information related to strategies and supports that are effective in educating students with…

Working Memory Underpins Cognitive Development, Learning, and Education

PubMed Central

Cowan, Nelson

2014-01-01

Working memory is the retention of a small amount of information in a readily accessible form. It facilitates planning, comprehension, reasoning, and problem-solving. I examine the historical roots and conceptual development of the concept and the theoretical and practical implications of current debates about working memory mechanisms. Then I explore the nature of cognitive developmental improvements in working memory, the role of working memory in learning, and some potential implications of working memory and its development for the education of children and adults. The use of working memory is quite ubiquitous in human thought, but the best way to improve education using what we know about working memory is still controversial. I hope to provide some directions for research and educational practice. PMID:25346585

So You Think You Want to Save the World

PubMed Central

Bodnar, Benjamin E.

2011-01-01

There is increasing interest among both medical and other professional communities in becoming involved in global health, development, and other charitable work. There has also been a proliferation of opportunities in the field. Nonetheless, it is still difficult to find practical information on the daily realities of development work or advice on the difficulties inherent to this type of work. This article is intended for individuals who are interested in becoming involved in global health and development work. Through a discussion that touches on development economics, the history, psychology, and current state of development aid, the common conflicts, as well as the rewards of development work, this article aims to prepare the interested individual for the experience of global health and development work. The article also provides practical suggestions and references for those searching for an opportunity in the field, with an emphasis on global health opportunities. PMID:21966040

So you think you want to save the world.

PubMed

Bodnar, Benjamin E

2011-09-01

There is increasing interest among both medical and other professional communities in becoming involved in global health, development, and other charitable work. There has also been a proliferation of opportunities in the field. Nonetheless, it is still difficult to find practical information on the daily realities of development work or advice on the difficulties inherent to this type of work. This article is intended for individuals who are interested in becoming involved in global health and development work. Through a discussion that touches on development economics, the history, psychology, and current state of development aid, the common conflicts, as well as the rewards of development work, this article aims to prepare the interested individual for the experience of global health and development work. The article also provides practical suggestions and references for those searching for an opportunity in the field, with an emphasis on global health opportunities. Copyright © 2011.

Personality Development at Work: Workplace Conditions, Personality Changes, and the Corresponsive Principle.

PubMed

Le, Kimdy; Donnellan, M Brent; Conger, Rand

2014-02-01

Investigations concerning adult personality development have increasingly focused on factors that are associated with apparent personality trait changes. The current study contributes to this literature by replicating and extending previous research concerning personality trait development in young adulthood and perceptions of workplace conditions. Analyses were based on up to 442 individuals who participated in the ongoing Family Transitions Project (e.g., Conger & Conger, 2002). The current analyses included personality trait data from 1994 and 2003, high school grades and socioeconomic status indicators from 1994, and reports about work conditions in 2001, 2003, and 2005. Personality attributes were prospectively associated with work conditions and income. Findings also support the corresponsive principle of personality development (e.g., Roberts, Caspi, & Moffitt, 2003): Traits that were prospectively associated with particular workplace conditions often seemed to be accentuated by those conditions. Personality traits are prospectively associated with perceptions of the workplace. Workplace conditions are also associated with trait development. © 2013 Wiley Periodicals, Inc.

Personality Development at Work: Workplace Conditions, Personality Changes, and the Corresponsive Principle

PubMed Central

Le, Kimdy; Donnellan, M. Brent; Conger, Rand

2013-01-01

Objective Investigations concerning adult personality development have increasingly focused on factors that are associated with apparent personality trait changes. The current study contributes to this literature by replicating and extending previous research concerning personality trait development in young adulthood and perceptions of workplace conditions. Method Analyses were based on up to 442 individuals who participated in the ongoing Family Transitions Project (e.g., Conger & Conger, 2002). The current analyses included personality trait data from 1994 and 2003, high-school grades and SES indicators from 1994, and reports about work conditions in 2001, 2003, and 2005. Results Personality attributes were prospectively associated with work conditions and income. Findings also support the corresponsive principle of personality development (e.g. Roberts, Caspi, & Moffitt, 2003): Traits that were prospectively associated with particular workplace conditions often seemed to be accentuated by those conditions. Conclusions Personality traits are prospectively associated with perceptions of the workplace. Workplace conditions are also associated with trait development. PMID:23336723

Cityworks: A Strategic Planning Model for Workforce Education and Training.

ERIC Educational Resources Information Center

City Coll. of San Francisco, CA.

In an effort to become more responsive to students' needs regarding the current and future labor market, California's City College of San Francisco (CCSF) developed "CityWorks," a strategic plan for workforce education and training. This report provides background to the development of CityWorks and describes key goals and strategies.…

The Development of Verbal and Visual Working Memory Processes: A Latent Variable Approach

ERIC Educational Resources Information Center

Koppenol-Gonzalez, Gabriela V.; Bouwmeester, Samantha; Vermunt, Jeroen K.

2012-01-01

Working memory (WM) processing in children has been studied with different approaches, focusing on either the organizational structure of WM processing during development (factor analytic) or the influence of different task conditions on WM processing (experimental). The current study combined both approaches, aiming to distinguish verbal and…

Can Music Professional Associations Build Capacity for Curricular Renewal?

ERIC Educational Resources Information Center

Shieh, Eric

2012-01-01

The work of renewing curriculum in music education faces the inertia of current curricular practices and an education reform climate that is unfavorable toward such work. This article suggests that the development of music teacher agency is central to combating these challenges, and that the development of such agency relies on today's…

FY 1987 current fiscal year work plan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

This Current Year Work Plan presents a detailed description of the activities to be performed by the Joint Integration Office during FY87. It breaks down the activities into two major work areas: Program Management and Program Analysis. Program Management is performed by the JIO by providing technical planning and guidance for the development of advanced TRU waste management capabilities. This includes equipment/facility design, engineering, construction, and operations. These functions are integrated to allow transition from interim storage to final disposition. JIO tasks include program requirements identification, long-range technical planning, budget development, program planning document preparation, task guidance, task monitoring, informationmore » gathering and task reporting to DOE, interfacing with other agencies and DOE lead programs, integrating public involvement with program efforts, and preparation of program status reports for DOE. Program Analysis is performed by the JIO to support identification and assessment of alternatives, and development of long-term TRU waste program capabilities. This work plan includes: system analyses, requirements analyses, interim and procedure development, legislative and regulatory analyses, dispatch and traffic analyses, and data bases.« less

Current trends in nursing theories.

PubMed

Im, Eun-Ok; Chang, Sun Ju

2012-06-01

To explore current trends in nursing theories through an integrated literature review. The literature related to nursing theories during the past 10 years was searched through multiple databases and reviewed to determine themes reflecting current trends in nursing theories. The trends can be categorized into six themes: (a) foci on specifics; (b) coexistence of various types of theories; (c) close links to research; (d) international collaborative works; (e) integration to practice; and (f) selective evolution. We need to make our continuous efforts to link research and practice to theories, to identify specifics of our theories, to develop diverse types of theories, and to conduct international collaborative works. Our paper gives implications for future theoretical development in diverse clinical areas of nursing research and practice. © 2012 Sigma Theta Tau International.

How do doctors choose where they want to work? - motives for choice of current workplace among physicians registered in Finland 1977-2006.

PubMed

Heikkilä, Teppo Juhani; Hyppölä, Harri; Aine, Tiina; Halila, Hannu; Vänskä, Jukka; Kujala, Santero; Virjo, Irma; Mattila, Kari

2014-02-01

Though there are a number of studies investigating the career choices of physicians, there are only few concerning doctors' choices of workplace. A random sample (N=7758) of physicians licensed in Finland during the years 1977-2006 was surveyed. Respondents were asked: "To what extent did the following motives affect your choice of your current workplace?" Respondents were grouped based on several background variables. The groups were used as independent variables in univariate analysis of covariance (ANCOVA). The factors Good workplace, Career and professional development, Non-work related issues, Personal contacts and Salary were formed and used as dependent variables. There were significant differences between groups of physicians, especially in terms of gender, working sector and specialties. The association of Good workplace, Career and professional development, and Non-work related issues with the choice of a workplace significantly decreased with age. Female physicians were more concerned with Career and professional development and Non-work related issues. Since more females are entering the medical profession and there is an ongoing change of generations, health care organizations and policy makers need to develop a new philosophy in order to attract physicians. This will need to include more human-centric management and leadership, better possibilities for continuous professional development, and more personalized working arrangements depending on physician's personal motives. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Nursing theory and concept development: a theoretical model of clinical nurses' intentions to stay in their current positions.

PubMed

Cowden, Tracy L; Cummings, Greta G

2012-07-01

We describe a theoretical model of staff nurses' intentions to stay in their current positions. The global nursing shortage and high nursing turnover rate demand evidence-based retention strategies. Inconsistent study outcomes indicate a need for testable theoretical models of intent to stay that build on previously published models, are reflective of current empirical research and identify causal relationships between model concepts. Two systematic reviews of electronic databases of English language published articles between 1985-2011. This complex, testable model expands on previous models and includes nurses' affective and cognitive responses to work and their effects on nurses' intent to stay. The concepts of desire to stay, job satisfaction, joy at work, and moral distress are included in the model to capture the emotional response of nurses to their work environments. The influence of leadership is integrated within the model. A causal understanding of clinical nurses' intent to stay and the effects of leadership on the development of that intention will facilitate the development of effective retention strategies internationally. Testing theoretical models is necessary to confirm previous research outcomes and to identify plausible sequences of the development of behavioral intentions. Increased understanding of the causal influences on nurses' intent to stay should lead to strategies that may result in higher retention rates and numbers of nurses willing to work in the health sector. © 2012 Blackwell Publishing Ltd.

Levers for Change in Educational Development in Canada: Looking Back, Looking Forward

ERIC Educational Resources Information Center

Dawson, Debra L.

2017-01-01

This paper examines levers or drivers that have influenced the direction of educational development in Canada over the last 40 years and also tries to predict what will be the impact of some current levers on changing the work of developers in the next 20 years. Reflecting on those years, it is apparent our work in the 1980s was very focused on…

IVS Working Group 4: VLBI Data Structures

NASA Technical Reports Server (NTRS)

Gipson, John

2010-01-01

In 2007 the IVS Directing Board established IVS Working Group 4 on VLBI Data Structures. This note discusses the current VLBI data format, goals for a new format, the history and formation of the Working Group, and a timeline for the development of a new VLBI data format.

Critical Thinking Traits of Top-Tier Experts and Implications for Computer Science Education

DTIC Science & Technology

2007-08-01

field of cognitive theory ," [Papert 1999] used his work while developing the Logo programming language. 19 Although other researchers had developed ...of computer expert systems influenced the development of current theories dealing with cognitive abilities. One of the most important initiatives by...multitude of factors involved. He also builds on the cognitive development work of Piaget and is not ready to abandon the generalist approach. Instead, he

Eddy current spectroscopy for near-surface residual stress profiling in surface treated nonmagnetic engine alloys

NASA Astrophysics Data System (ADS)

Abu-Nabah, Bassam A.

Recent research results indicated that eddy current conductivity measurements can be exploited for nondestructive evaluation of near-surface residual stresses in surface-treated nickel-base superalloy components. Most of the previous experimental studies were conducted on highly peened (Almen 10-16A) specimens that exhibit harmful cold work in excess of 30% plastic strain. Such high level of cold work causes thermo-mechanical relaxation at relatively modest operational temperatures; therefore the obtained results were not directly relevant to engine manufacturers and end users. The main reason for choosing peening intensities in excess of recommended normal levels was that in low-conductivity engine alloys the eddy current penetration depth could not be forced below 0.2 mm without expanding the measurements above 10 MHz which is beyond the operational range of most commercial eddy current instruments. As for shot-peened components, it was initially felt that the residual stress effect was more difficult to separate from cold work, texture, and inhomogeneity effects in titanium alloys than in nickel-base superalloys. In addition, titanium alloys have almost 50% lower electric conductivity than nickel-base superalloys; therefore require proportionally higher inspection frequencies, which was not feasible until our recent breakthrough in instrument development. Our work has been focused on six main aspects of this continuing research, namely, (i) the development of an iterative inversion technique to better retrieve the depth-dependent conductivity profile from the measured frequency-dependent apparent eddy current conductivity (AECC), (ii) the extension of the frequency range up to 80 MHz to better capture the peak compressive residual stress in nickel-base superalloys using a new eddy current conductivity measuring system, which offers better reproducibility, accuracy and measurement speed than the previously used conventional systems, (iii) the lift-off effect on high frequency eddy current spectroscopy, (iv) the development of custom-made spiral coils to allow eddy current conductivity characterization over the whole frequency range of interest with reduced coil sensitivity to lift off, (v) the benefits of implementing a semi-quadratic system calibration in reducing the coil sensitivity to lift-off, and (vi) the feasibility of adapting high-frequency eddy current residual stress characterization for shot-peened titanium alloys.

Enhancing the Early Childhood Development System in Yakutia (Russia): Meeting the Challenges

ERIC Educational Resources Information Center

Kotnik, Jure; Shmis, Tigran

2011-01-01

The Yakutia Republic is currently working to update its early childhood development (ECD) system. Its goal is to ensure a high quality environment for early learning and child care and to enable higher enrolment levels. Currently, a high priority for the Government of Yakutia is to increase access to pre-school education, given the significant…

Experimental investigation on the development characteristics of initial electrons in a gas pressurized closing switch under DC voltage

NASA Astrophysics Data System (ADS)

Rongxiao, ZHAI; Mengtong, QIU; Weixi, LUO; Peitian, CONG; Tao, HUANG; Jiahui, YIN; Tianyang, ZHANG

2018-04-01

As one of the most important elements in linear transformer driver (LTD) based systems, the gas pressurized closing switches are required to operate with a very low prefire probability during the DC-charging process to ensure reliable operation and stable output of the whole pulsed power system. The most direct and effective way to control the prefire probability is to select a suitable working coefficient. The study of the development characteristics of the initially generated electrons is useful for optimizing the working coefficient and improving the prefire characteristic of the switches. In this paper an ultraviolet pulsed laser is used to generate initial electrons inside the gap volume. A current measuring system is used to measure the time-dependent current generated by the growth of the initial electrons so as to study the development characteristics of the electrons under different working coefficients. Experimental results show that the development characteristics of the initial electrons are influenced obviously by the working coefficient. With the increase of the working coefficient, the development degree of the electrons increases consequently. At the same times, there is a threshold of working coefficient which produces the effect of ionization on electrons. The range of the threshold has a slow growth but remains close to 65% with the gas pressure increase. When the working coefficient increases further, γ processes are starting to be generated inside the gap volume. In addition, an optimal working coefficient beneficial for improving the prefire characteristic is indicated and further tested.

Influence of backup bearings and support structure dynamics on the behavior of rotors with active supports

NASA Technical Reports Server (NTRS)

Flowers, George T.

1994-01-01

Substantial progress has been made toward the goals of this research effort in the past six months. A simplified rotor model with a flexible shaft and backup bearings has been developed. The model is based upon the work of Ishii and Kirk. Parameter studies of the behavior of this model are currently being conducted. A simple rotor model which includes a flexible disk and bearings with clearance has been developed and the dynamics of the model investigated. The study consists of simulation work coupled with experimental verification. The work is documented in the attached paper. A rotor model based upon the T-501 engine has been developed which includes backup bearing effects. The dynamics of this model are currently being studied with the objective of verifying the conclusions obtained from the simpler models. Parallel simulation runs are being conducted using an ANSYS based finite element model of the T-501.

Leadership: current theories, research, and future directions.

PubMed

Avolio, Bruce J; Walumbwa, Fred O; Weber, Todd J

2009-01-01

This review examines recent theoretical and empirical developments in the leadership literature, beginning with topics that are currently receiving attention in terms of research, theory, and practice. We begin by examining authentic leadership and its development, followed by work that takes a cognitive science approach. We then examine new-genre leadership theories, complexity leadership, and leadership that is shared, collective, or distributed. We examine the role of relationships through our review of leader member exchange and the emerging work on followership. Finally, we examine work that has been done on substitutes for leadership, servant leadership, spirituality and leadership, cross-cultural leadership, and e-leadership. This structure has the benefit of creating a future focus as well as providing an interesting way to examine the development of the field. Each section ends with an identification of issues to be addressed in the future, in addition to the overall integration of the literature we provide at the end of the article.

The Welfare to Work Transition in the United States: Implications for Work-Related Learning

NASA Astrophysics Data System (ADS)

Fisher, James C.; Martin, Larry G.

2000-11-01

This paper summarizes the legislation upon which the current welfare-to-work transition in the United States is based and describes characteristics of the former welfare population from which various tiers of employment options have emerged: unsubsidized-employed workers, subsidized-employed workers, subsidized-unemployed recipients, and unsubsidized-unemployed individuals. It also discusses current program emphases, and presents a format for directions for future program development which includes academic programs, situated cognition programs, integrated literacy/occupational skills programs, and integrated literacy/soft skills training.

The Development of Duct for a Horizontal Axis Turbine Using CFD

NASA Astrophysics Data System (ADS)

Ghani, Mohamad Pauzi Abdul; Yaacob, Omar; Aziz, Azliza Abdul

2010-06-01

Malaysia is heavily dependent on the fossil fuels to satisfy its energy demand. Nowadays, renewable energy which has attracted great interest is marine current energy, which extracted by a device called a device called marine current turbine. This energy resource has agreat potential to be exploited on a large scale because of its predictability and intensity. This paper will focus on developing a Horizontal Axis Marine Current Turbine (HAMCT) rotor to extract marine current energy suitable for Malaysian sea conditions. This work incorporates the characteristic of Malaysia's ocean of shallow water and low speed current in developing the turbines. The HAMCT rotor will be developed and simulated using CAD and CFD software for various combination of inlet and oulet duct design. The computer simulation results of the HAMCT being developed will be presented.

Specialty Practice or Interstitial Practice? A Reconsideration of School Social Work's Past and Present

ERIC Educational Resources Information Center

Phillippo, Kate L.; Blosser, Allison

2013-01-01

This article analyzes school social work's history to provide perspective on current dilemmas in social work practice and research. The authors use interstitial emergence theory, which holds that practices from overlapping fields (like social work and K-12 education) can develop into new fields, as an analytic framework. This perspective extends…

Effects of Working Mothers on Child Development in Kenya.

ERIC Educational Resources Information Center

Tumuti, Dinah W.

More women have entered the job market than ever before. With the current socioeconomic changes and with more women attaining education, the number of working women is going to increase rapidly. Most of the working women are of childbearing age and have both preschool and school-age children. While women have to work, it is becoming rather…

Training MSSW Students for Military Social Work Practice and Doctoral Students in Military Resilience Research

ERIC Educational Resources Information Center

DuMars, Tyler; Bolton, Kristin; Maleku, Arati; Smith-Osborne, Alexa

2015-01-01

The demand for social workers with military-related practice and research experience exceeds the current supply. To advance military social work education, we developed an interlevel master's of science in social work (MSSW) field practicum and doctoral research practicum that provides military social work field experiences and contributes to…

Learning through Work: Emerging Perspectives and New Challenges

ERIC Educational Resources Information Center

Billett, Stephen; Choy, Sarojni

2013-01-01

Purpose: This paper aims to consider and appraise current developments and emerging perspectives on learning in the circumstances of work, to propose how some of the challenges for securing effective workplace learning may be redressed. Design/methodology/approach: First, new challenges and perspectives on learning in the circumstances of work are…

Anticipated Work-Family Conflict: A Construct Investigation

ERIC Educational Resources Information Center

Westring, Alyssa Friede; Ryan, Ann Marie

2011-01-01

To date, little is known about how work-family issues impact the career development process. In the current paper, we explore this issue by investigating a relatively unstudied construct: anticipated work-family conflict. We found that this construct can be represented by the same six-dimensional factor structure used to assess concurrent…

A School-to-Work Resource Guide: Focusing on Diversity.

ERIC Educational Resources Information Center

Maddy-Bernstein, Carolyn, Comp.; And Others

This guide, which is designed for educators who are developing, implementing, or seeking background information about school-to-work transition programs, contains descriptions of 222 of the most current (1990-present) resources for/about the school-to-work transition. The entries describing each resource are organized into four sections:…

Individual Differences in the Development of Early Writing Skills: Testing the Unique Contribution of Visuo-Spatial Working Memory

ERIC Educational Resources Information Center

Bourke, Lorna; Davies, Simon J.; Sumner, Emma; Green, Carolyn

2014-01-01

Visually mediated processes including, exposure to print (e.g. reading) as well as orthographic transcription and coding skills, have been found to contribute to individual differences in literacy development. The current study examined the role of visuospatial working memory (WM) in underpinning this relationship and emergent writing. One hundred…

Measuring Teachers' Efficacy Working with Diverse Student Needs: Testing a Measurement Model. Technical Report # 38

ERIC Educational Resources Information Center

Alonzo, Julie; Tindal, Gerald; McCoy, Jan

2005-01-01

This technical report describes the development, pilot testing, and revision of a survey instrument designed to measure secondary school teachers' perceptions of their efficacy working with students from diverse backgrounds. A brief review of relevant literature frames the current study in the context of survey development that is technically…

Adolescent Brain Development: Current Research and the Impact on Secondary School Counseling Programs

ERIC Educational Resources Information Center

Roaten, Gail K.; Roaten, David J.

2012-01-01

Brain growth and change is a key factor in adolescent development, influencing cognitions, emotions, and behavior. As technology has improved, so has the research on the adolescent brain. School counselors working with adolescents need to be familiar with recent literature to be more effective in their work with middle and high school students.…

A Job-Linked Literacy Program for SPC: Are We Talking about Worker Training, Work Reorganization, or More Equitable Workplaces?

ERIC Educational Resources Information Center

Sarmiento, Tony; Schurman, Susan

Unions and employers currently operate in an environment that does not support investment in skill development. However, competitiveness demands that both work and the way workers are educated and trained be radically restructured. In high-performance workplaces, participatory labor-management approaches to job-linked basic skills development are…

Why Community Works: The Use of Alfred Adler's Individual Psychology as a Foundational Theory.

ERIC Educational Resources Information Center

Glenn, Robert K.; Keith, Edwin M.

2002-01-01

Asserts that the Individual Psychology of Alfred Adler should be used as a foundational theory for student affairs work. The success of community building programs is explained and the concepts of Individual Psychology are summarized. Also asserts that the current drive to develop programs to develop community on college campuses is firmly rooted…

Multiscale modeling of current-induced switching in magnetic tunnel junctions using ab initio spin-transfer torques

NASA Astrophysics Data System (ADS)

Ellis, Matthew O. A.; Stamenova, Maria; Sanvito, Stefano

2017-12-01

There exists a significant challenge in developing efficient magnetic tunnel junctions with low write currents for nonvolatile memory devices. With the aim of analyzing potential materials for efficient current-operated magnetic junctions, we have developed a multi-scale methodology combining ab initio calculations of spin-transfer torque with large-scale time-dependent simulations using atomistic spin dynamics. In this work we introduce our multiscale approach, including a discussion on a number of possible schemes for mapping the ab initio spin torques into the spin dynamics. We demonstrate this methodology on a prototype Co/MgO/Co/Cu tunnel junction showing that the spin torques are primarily acting at the interface between the Co free layer and MgO. Using spin dynamics we then calculate the reversal switching times for the free layer and the critical voltages and currents required for such switching. Our work provides an efficient, accurate, and versatile framework for designing novel current-operated magnetic devices, where all the materials details are taken into account.

Development of recommendations for arterial lane closures to optimize traffic operations.

DOT National Transportation Integrated Search

2013-01-01

The 2010 FDOT Design Standards provide information regarding traffic control through work zones at multilane arterials. : However, there are currently no quantitative guidelines for optimizing signal control around work zones. The objective of this :...

SpaceFibre Discussion

NASA Technical Reports Server (NTRS)

Rakow, Glenn

2007-01-01

This viewgraph presentation discusses the future use of SpaceFibre, a high speed optical extension to the SpaceWire, for NASA and DOD missions. NASA, and US industries would like to work with the European developers currently working on this standard.

User interface development

NASA Technical Reports Server (NTRS)

Aggrawal, Bharat

1994-01-01

This viewgraph presentation describes the development of user interfaces for OS/2 versions of computer codes for the analysis of seals. Current status, new features, work in progress, and future plans are discussed.

Continuous development of current sheets near and away from magnetic nulls

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kumar, Sanjay; Bhattacharyya, R.

2016-04-15

The presented computations compare the strength of current sheets which develop near and away from the magnetic nulls. To ensure the spontaneous generation of current sheets, the computations are performed congruently with Parker's magnetostatic theorem. The simulations evince current sheets near two dimensional and three dimensional magnetic nulls as well as away from them. An important finding of this work is in the demonstration of comparative scaling of peak current density with numerical resolution, for these different types of current sheets. The results document current sheets near two dimensional magnetic nulls to have larger strength while exhibiting a stronger scalingmore » than the current sheets close to three dimensional magnetic nulls or away from any magnetic null. The comparative scaling points to a scenario where the magnetic topology near a developing current sheet is important for energetics of the subsequent reconnection.« less

Developing Air Force Acquisition Leaders for the 21st Century

DTIC Science & Technology

2003-03-12

for leaving the military, it has a significant influence on both job enjoyment (third) and the amount of personal and family time available (first...and spiral development. The development of a professional work force and its accession and retention will be imperative for success in meeting current... for managing acquisition and its work force. To meet the new challenges and threats of the 21st century, defense

[Development and Testing of the Taiwanese Hospital Nurses' Job Satisfaction Scale].

PubMed

Tzeng, Wen-Chii; Lin, Chiou-Fen; Lin, Lih-Ying; Lu, Meei-Shiow; Chiang, Li-Chi

2017-04-01

In the context of professional nursing, the concept of job satisfaction includes the degree to which a nurse is satisfied with the nursing profession, his/her personal adaptation to this profession, and his/her current working environment. No validated scale that addresses the job satisfaction of nurses working in hospitals currently exists in Taiwan. To develop a reliable and validated scale for measuring the job satisfaction of hospital nurses in Taiwan. A three-phase, cross-sectional study design was used. First, a literature review and expert focus group discussion were conducted to develop the initial scale items. Second, experts were invited to validate the content of the draft scale. Finally, convenience sampling was used to recruit 427 hospital nurses from 6 hospitals. These nurses completed the scale and the results were analyzed using item analysis, factor analysis, and internal consistency analysis. The 31-item Taiwanese hospital nurse job satisfaction scale developed in the present study addresses 5 factors, including supportive working environment, professional autonomy and growth, interpersonal interaction and collaboration, leadership style, and nursing workload. The overall Cronbach's α was .96. The results indicate that the developed scale provides good reliability and validity. This study confirms the validity and reliability of the developed scale. It may be used to measure the job satisfaction of nurses working in hospitals.

A Comparative Test of Work-Family Conflict Models and Critical Examination of Work-Family Linkages

ERIC Educational Resources Information Center

Michel, Jesse S.; Mitchelson, Jacqueline K.; Kotrba, Lindsey M.; LeBreton, James M.; Baltes, Boris B.

2009-01-01

This paper is a comprehensive meta-analysis of over 20 years of work-family conflict research. A series of path analyses were conducted to compare and contrast existing work-family conflict models, as well as a new model we developed which integrates and synthesizes current work-family theory and research. This new model accounted for 40% of the…

Factors influencing the work passion of Chinese community health service workers: an investigation in five provinces

PubMed Central

2014-01-01

Background After the implementation of new healthcare reform, Chinese government paid increasing attention to developing community health service (CHS). The current focus is mainly on cultivating community general practitioners but paying less attention to the working status and occupational demands of in-service CHS workers. Work passion is playing an important role for medical workers. With work passion, CHS workers’ team will become more stable and more effective, ensuring the sustainable development of CHS system. At present, the work passion of CHS workers is relatively low. Studying on influencing factors of work passion of CHS workers, promoting their work passion, and making them keep enthusiasm for work are significant. Methods A total of 100 CHS organizations were sampled randomly in 10 cities from 5 Chinese provinces for this study. A total of 3450 CHS workers from these CHS institutions took part in the surveys. Questionnaires were used to collect data, including socio-demographic information, work passion and opinion on influencing causes, and work-related satisfaction. Pearson chi-square statistical method was used to identify the factors related to CHS workers’ work passion. Binary logistic regression was performed to determine the significant factors that influence CHS workers’ work passion. Results A total of 38.77% of those who accomplished the questionnaire expressed that they didn’t have passion for current work. The related factors that influence CHS workers’ work passion are (1) socio-demographic factors such as age, and years of employment, and (2) other work-related factors such as learning and training opportunities, compensation packages, work stress, and personal development opportunities. CHS workers were most dissatisfied with the balance between remuneration and workload, job promotion opportunities. Conclusions Based on the results, the government should concern for CHS workers’ working status and work-related demands, pay more attention and meet their demands for reasonable compensation packages and self-development, balance the income and workload, provide more learning and training opportunities and personal development opportunities for CHS workers, in order to promote CHS workers’ work satisfaction, improve their work passion and enthusiasm. PMID:24885642

Factors influencing the work passion of Chinese community health service workers: an investigation in five provinces.

PubMed

Luo, Zhenni; Bai, Xue; Min, Rui; Tang, Changmin; Fang, Pengqian

2014-05-01

After the implementation of new healthcare reform, Chinese government paid increasing attention to developing community health service (CHS). The current focus is mainly on cultivating community general practitioners but paying less attention to the working status and occupational demands of in-service CHS workers. Work passion is playing an important role for medical workers. With work passion, CHS workers' team will become more stable and more effective, ensuring the sustainable development of CHS system. At present, the work passion of CHS workers is relatively low. Studying on influencing factors of work passion of CHS workers, promoting their work passion, and making them keep enthusiasm for work are significant. A total of 100 CHS organizations were sampled randomly in 10 cities from 5 Chinese provinces for this study. A total of 3450 CHS workers from these CHS institutions took part in the surveys. Questionnaires were used to collect data, including socio-demographic information, work passion and opinion on influencing causes, and work-related satisfaction. Pearson chi-square statistical method was used to identify the factors related to CHS workers' work passion. Binary logistic regression was performed to determine the significant factors that influence CHS workers' work passion. A total of 38.77% of those who accomplished the questionnaire expressed that they didn't have passion for current work. The related factors that influence CHS workers' work passion are (1) socio-demographic factors such as age, and years of employment, and (2) other work-related factors such as learning and training opportunities, compensation packages, work stress, and personal development opportunities. CHS workers were most dissatisfied with the balance between remuneration and workload, job promotion opportunities. Based on the results, the government should concern for CHS workers' working status and work-related demands, pay more attention and meet their demands for reasonable compensation packages and self-development, balance the income and workload, provide more learning and training opportunities and personal development opportunities for CHS workers, in order to promote CHS workers' work satisfaction, improve their work passion and enthusiasm.

Lightning protection of distribution systems

NASA Astrophysics Data System (ADS)

Darveniza, M.; Uman, M. A.

1982-09-01

Research work on the lightning protection of distribution systems is described. The rationale behind the planning of the first major phase of the work - the field experiments conducted in the Tampa Bay area during August 1978 and July to September 1979 is explained. The aims of the field work were to characterize lightning in the Tampa Bay area, and to identify the lightning parameters associated with the occurrence of line outages and equipment damage on the distribution systems of the participating utilities. The equipment developed for these studies is fully described. The field work provided: general data on lightning - e.g., electric and magnetic fields of cloud and ground flashes; data from automated monitoring of lightning activity; stroke current waveshapes and peak currents measured at distribution arresters; and line outage and equipment damage on 13 kV networks in the Tampa Bay area. Computer aided analyses were required to collate and to process the accumulated data. The computer programs developed for this work are described.

Employment needs of people with multiple sclerosis: a review of current literature and application to occupational therapy practice.

PubMed

Van Denend, Toni

2006-01-01

Individuals with multiple sclerosis (MS) are often diagnosed during a period of life when career exploration and development occurs. The purpose of this paper is to examine the literature that has been published from 1996 to 2004 about the employment needs of people with MS in order to build upon Rumrill's (1996a) text and develop a set of treatment priorities for occupational therapists working with this population. The current literature highlights the potential employment challenges and incentives, programmatic barriers, and challenges specific to women with MS. The literature also highlights the changing meaning of work, the importance of coping with these changes, and the scope of needed intervention. Outlined are occupational therapy treatment priorities for people with MS in the performance area of work.

Non-invasive current and voltage imaging techniques for integrated circuits using scanning probe microscopy. Final report, LDRD Project FY93 and FY94

DOE Office of Scientific and Technical Information (OSTI.GOV)

Campbell, A.N.; Cole, E.I. Jr.; Tangyunyong, Paiboon

This report describes the first practical, non-invasive technique for detecting and imaging currents internal to operating integrated circuits (ICs). This technique is based on magnetic force microscopy and was developed under Sandia National Laboratories` LDRD (Laboratory Directed Research and Development) program during FY 93 and FY 94. LDRD funds were also used to explore a related technique, charge force microscopy, for voltage probing of ICs. This report describes the technical work performed under this LDRD as well as the outcomes of the project in terms of publications and awards, intellectual property and licensing, synergistic work, potential future work, hiring ofmore » additional permanent staff, and benefits to DOE`s defense programs (DP).« less

20 Years after "The Ontogeny of Human Memory: A Cognitive Neuroscience Perspective," Where Are We?

ERIC Educational Resources Information Center

Jabès, Adeline; Nelson, Charles A.

2015-01-01

In 1995, Nelson published a paper describing a model of memory development during the first years of life. The current article seeks to provide an update on the original work published 20 years ago. Specifically, we review our current knowledge on the relation between the emergence of explicit memory functions throughout development and the…

Java for flight software

NASA Technical Reports Server (NTRS)

Benowitz, E.; Niessner, A.

2003-01-01

This work involves developing representative mission-critical spacecraft software using the Real-Time Specification for Java (RTSJ). This work currently leverages actual flight software used in the design of actual flight software in the NASA's Deep Space 1 (DSI), which flew in 1998.

NASA/GSFC Onboard Autonomy For The Swift Mission

NASA Technical Reports Server (NTRS)

Ong, John

2005-01-01

This viewgraph presentation reviews the work that NASA Goddard Space Flight Center is currently doing and has been involved in in developing onboard autonomy and automation. Emphasis is given to the work being done for the Swift observatory

Summary of Current and Future MSFC International Space Station Environmental Control and Life Support System Activities

NASA Technical Reports Server (NTRS)

Ray, Charles D.; Carrasquillo, Robyn L.; Minton-Summers, Silvia

1997-01-01

This paper provides a summary of current work accomplished under technical task agreement (TTA) by the Marshall Space Flight Center (MSFC) regarding the Environmental Control and Life Support System (ECLSS) as well as future planning activities in support of the International Space Station (ISS). Current activities include ECLSS computer model development, component design and development, subsystem integrated system testing, life testing, and government furnished equipment delivered to the ISS program. A long range plan for the MSFC ECLSS test facility is described whereby the current facility would be upgraded to support integrated station ECLSS operations. ECLSS technology development efforts proposed to be performed under the Advanced Engineering Technology Development (AETD) program are also discussed.

Is Social Work Evidence-Based? Does Saying So Make It So? Ongoing Challenges in Integrating Research, Practice and Policy

ERIC Educational Resources Information Center

Gambrill, Eileen

2016-01-01

The integration of research and practice is of concern in all helping professions. Has social work become an evidence-based profession as some claim? Characteristics of current-day social work are presented that dispute this view, related continuing concerns are suggested, and promising developments (mostly outside social work) are described that…

Management Development in Hospitality and Tourism.

ERIC Educational Resources Information Center

Teare, Richard, Ed.; And Others

1990-01-01

A theme issue devoted to management development in hospitality and tourism includes nine articles on assessing human resource needs and priorities, management development and training, preparing managers, curriculum design, supervised work experience, manager role, and the current business environment. (JOW)

Access to Intersectionality, Content to Competence: Deconstructing Social Work Education Diversity Standards

ERIC Educational Resources Information Center

Jani, Jayshree S.; Pierce, Dean; Ortiz, Larry; Sowbel, Lynda

2011-01-01

This article provides an assessment of the current situation in social work education regarding the teaching of content on diversity, with a focus on implications for social work theory, practice, and education. The article provides a critical analysis of the historical development of approaches to teaching diversity content in social work…

Developing a Competency Framework for the Initial Training of Educational Psychologists Working with Young People Aged 16-25

ERIC Educational Resources Information Center

Atkinson, Cathy; Dunsmuir, Sandra; Lang, Jane; Wright, Sarah

2015-01-01

The Children and Families Act (2014) extends statutory protections for young people with special educational needs and disabilities until age 25. Consequently the core curriculum for trainee educational psychologists (TEPs) needs to be developed beyond the current focus of work with early years and school-age children. In order to define requisite…

Measuring Turbulence Mixing in Indonesian Seas Using Microstructure EM-APEX Floats

DTIC Science & Technology

We developed scientific plans for collaborative observational programs with Indonesian,Taiwanese, and Japanese researchers. We worked with Taiwanese...and Japanese researchers to plan and execute turbulence experiments using autonomous platforms in the SCS and Kuroshio Current. Our primary platform...and the Applied Physics Laboratory, University of Washington. We are working closely with Japanese collaborators to develop a turbulence observation

Design and development of a ferroelectric micro photo detector for the bionic eye

NASA Astrophysics Data System (ADS)

Song, Yang

Driven by no effective therapy for Retinitis Pigmentosa and Age Related Macular Degeneration, artificial vision through the development of an artificial retina that can be implanted into the human eye, is being addressed by the Bionic Eye. This dissertation focuses on the study of a photoferroelectric micro photo detector as an implantable retinal prosthesis for vision restoration in patients with above disorders. This implant uses an electrical signal to trigger the appropriate ocular cells of the vision system without resorting to wiring or electrode implantation. The research work includes fabrication of photoferroelectric thin film micro detectors, characterization of these photoferroelectric micro devices as photovoltaic cells, and Finite Element Method (FEM) modeling of the photoferroelectrics and their device-neuron interface. A ferroelectric micro detector exhibiting the photovoltaic effect (PVE) directly adds electrical potential to the neuron membrane outer wall at the focal adhesion regions. The electrical potential then generates a retinal cell membrane potential deflection through a newly developed Direct-Electric-Field-Coupling (DEFC) model. This model is quite different from the traditional electric current model because instead of current directly working on the cell membrane, the PVE current is used to generate a localized high electric potential in the focal adhesion region by working together with the anisotropic high internal impedance of ferroelectric thin films. General electrodes and silicon photodetectors do not have such anisotropy and high impedance, and thus they cannot generate DEFC. This mechanism investigation is very valuable, because it clearly shows that our artificial retina works in a way that is totally different from the traditional current stimulation methods.

Development of an Ergonomics Checklist for Investigation of Work-Related Whole-Body Disorders in Farming - AWBA: Agricultural Whole-Body Assessment.

PubMed

Kong, Y K; Lee, S J; Lee, K S; Kim, G R; Kim, D M

2015-10-01

Researchers have been using various ergonomic tools to study occupational musculoskeletal diseases in industrial contexts. However, in agricultural work, where the work environment is poorer and the socio-psychological stress is high due to the high labor intensities of the industry, current research efforts have been scarce, and the number of available tools is small. In our preliminary studies, which focused on a limited number of body parts and other working elements, we developed separate evaluation tools for the upper and lower extremities. The current study was conducted to develop a whole-body ergonomic assessment tool for agricultural work that integrates the existing assessment tools for lower and upper extremities developed in the preliminary studies and to verify the relevance of the integrated assessment tool. To verify the relevance of the Agricultural Whole-Body Assessment (AWBA) tool, we selected 50 different postures that occur frequently in agricultural work. Our results showed that the AWBA-determined risk levels were similar to the subjective risk levels determined by experts. In addition, as the risk level increased, the average risk level increased to a similar extent. Moreover, the differences in risk levels between the AWBA and expert assessments were mostly smaller than the differences in risk levels between other assessment tools and the expert assessments in this study. In conclusion, the AWBA tool developed in this study was demonstrated to be appropriate for use as a tool for assessing various postures commonly assumed in agricultural work. Moreover, we believe that our verification of the assessment tools will contribute to the enhancement of the quality of activities designed to prevent and control work-related musculoskeletal diseases in other industries.

Automated eddy current analysis of materials

NASA Technical Reports Server (NTRS)

Workman, Gary L.

1991-01-01

The use of eddy current techniques for characterizing flaws in graphite-based filament-wound cylindrical structures is described. A major emphasis was also placed upon incorporating artificial intelligence techniques into the signal analysis portion of the inspection process. Developing an eddy current scanning system using a commercial robot for inspecting graphite structures (and others) was a goal in the overall concept and is essential for the final implementation for the expert systems interpretation. Manual scans, as performed in the preliminary work here, do not provide sufficiently reproducible eddy current signatures to be easily built into a real time expert system. The expert systems approach to eddy current signal analysis requires that a suitable knowledge base exist in which correct decisions as to the nature of a flaw can be performed. A robotic workcell using eddy current transducers for the inspection of carbon filament materials with improved sensitivity was developed. Improved coupling efficiencies achieved with the E-probes and horseshoe probes are exceptional for graphite fibers. The eddy current supervisory system and expert system was partially developed on a MacIvory system. Continued utilization of finite element models for predetermining eddy current signals was shown to be useful in this work, both for understanding how electromagnetic fields interact with graphite fibers, and also for use in determining how to develop the knowledge base. Sufficient data was taken to indicate that the E-probe and the horseshoe probe can be useful eddy current transducers for inspecting graphite fiber components. The lacking component at this time is a large enough probe to have sensitivity in both the far and near field of a thick graphite epoxy component.

University of Washington/ Northwest National Marine Renewable Energy Center Tidal Current Technology Test Protocol, Instrumentation, Design Code, and Oceanographic Modeling Collaboration: Cooperative Research and Development Final Report, CRADA Number CRD-11-452

DOE Office of Scientific and Technical Information (OSTI.GOV)

Driscoll, Frederick R.

The University of Washington (UW) - Northwest National Marine Renewable Energy Center (UW-NNMREC) and the National Renewable Energy Laboratory (NREL) will collaborate to advance research and development (R&D) of Marine Hydrokinetic (MHK) renewable energy technology, specifically renewable energy captured from ocean tidal currents. UW-NNMREC is endeavoring to establish infrastructure, capabilities and tools to support in-water testing of marine energy technology. NREL is leveraging its experience and capabilities in field testing of wind systems to develop protocols and instrumentation to advance field testing of MHK systems. Under this work, UW-NNMREC and NREL will work together to develop a common instrumentation systemmore » and testing methodologies, standards and protocols. UW-NNMREC is also establishing simulation capabilities for MHK turbine and turbine arrays. NREL has extensive experience in wind turbine array modeling and is developing several computer based numerical simulation capabilities for MHK systems. Under this CRADA, UW-NNMREC and NREL will work together to augment single device and array modeling codes. As part of this effort UW NNMREC will also work with NREL to run simulations on NREL's high performance computer system.« less

The Powell Volcano Remote Sensing Working Group Overview

NASA Astrophysics Data System (ADS)

Reath, K.; Pritchard, M. E.; Poland, M. P.; Wessels, R. L.; Biggs, J.; Carn, S. A.; Griswold, J. P.; Ogburn, S. E.; Wright, R.; Lundgren, P.; Andrews, B. J.; Wauthier, C.; Lopez, T.; Vaughan, R. G.; Rumpf, M. E.; Webley, P. W.; Loughlin, S.; Meyer, F. J.; Pavolonis, M. J.

2017-12-01

Hazards from volcanic eruptions pose risks to the lives and livelihood of local populations, with potential global impacts to businesses, agriculture, and air travel. The 2015 Global Assessment of Risk report notes that 800 million people are estimated to live within 100 km of 1400 subaerial volcanoes identified as having eruption potential. However, only 55% of these volcanoes have any type of ground-based monitoring. The only methods currently available to monitor these unmonitored volcanoes are space-based systems that provide a global view. However, with the explosion of data techniques and sensors currently available, taking full advantage of these resources can be challenging. The USGS Powell Center Volcano Remote Sensing Working Group is working with many partners to optimize satellite resources for global detection of volcanic unrest and assessment of potential eruption hazards. In this presentation we will describe our efforts to: 1) work with space agencies to target acquisitions from the international constellation of satellites to collect the right types of data at volcanoes with forecasting potential; 2) collaborate with the scientific community to develop databases of remotely acquired observations of volcanic thermal, degassing, and deformation signals to facilitate change detection and assess how these changes are (or are not) related to eruption; and 3) improve usage of satellite observations by end users at volcano observatories that report to their respective governments. Currently, the group has developed time series plots for 48 Latin American volcanoes that incorporate variations in thermal, degassing, and deformation readings over time. These are compared against eruption timing and ground-based data provided by the Smithsonian Institute Global Volcanism Program. Distinct patterns in unrest and eruption are observed at different volcanoes, illustrating the difficulty in developing generalizations, but highlighting the power of remote sensing to better understand each volcano's behavior. To share these results with end users, the group is developing a communication tool that would allow researchers to share information relating to specific volcanoes or regions, although it is currently under development as we work to determine the clearest lines of communication.

Teachers' Opinions about Professional Development Schools=Ögretmenlerin Mesleki Gelisim Okullarina Iliskin Görüsleri

ERIC Educational Resources Information Center

Ulubey, Özgür; Yildirim, Kasim; Alpaslan, Muhammet Mustafa; Aykaç, Necdet

2017-01-01

The purpose of the current study is to determine teachers' opinions about professional development schools. In the current study; one of the mixed methods, the convergent design was employed. The sampling of the quantitative dimension of the study is comprised of 256 teachers working in 21 elementary and secondary schools in the city of Mugla. The…

High voltage and current, gate assisted, turn-off thyristor development

NASA Technical Reports Server (NTRS)

Nowalk, T. P.; Brewster, J. B.; Kao, Y. C.

1972-01-01

An improved high speed power switch with unique turn-off capability was developed. This gate assisted turn-off thyristor (GATT) was rated 1000 volts and 100 amperes with turn-off times of 2 microseconds. Fifty units were delivered for evaluation. In addition, test circuits designed to relate to the series inverter application were built and demonstrated. In the course of this work it was determined that the basic device design is adequate to meet the static characteristics and dynamic turn-off specification. It was further determined that the turn-on specification is critically dependent on the gate drive circuit due to the distributive nature of the cathode-gate geometry. Future work should emphasize design modifications which reduce the gate current required for fast turn-on, thereby opening the way to higher power (current) devices.

When Measurement Benefits the Measured

DTIC Science & Technology

2014-04-23

manage how you estimate your work and how you manage the quality of our work. Knowledge workers manage themselves with data. Software engineers...development, coaching, and training. His current research and development interests include data quality assessment and improvement, project...was an engineer and manager at Boeing in Seattle. He has a Masters Degree in Systems Engineering and is a senior member of IEEE. Mark is a certified

Defense: FY2012 Budget Request, Authorization and Appropriations

DTIC Science & Technology

2012-02-13

current counterinsurgency and dismounted operations in [Iraq and Afghanistan] place service women in direct combat action with the enemy. The ...vehicles, including the EFV and a modified version of the AAV-7. However, the provision bars any other amphibious vehicle development work until the ...would allow information technology companies other than the original developer to bid for maintenance and upgrade work on the system

But I Don't Want to Be a Professor! The Innovations of an Online Practitioner Doctorate Focused on Educational Technology Leadership

ERIC Educational Resources Information Center

Miller, Christopher T.; Curry, John H.

2014-01-01

There is growing potential for the development of practitioner-based doctor of education (EdD) programs as potential students in the field recognize that they do not need to leave their current work positions to obtain a doctorate particularly if it enhances their work. This article chronicles 1 university's process in developing an innovative…

Functional structure and dynamics of the human nervous system

NASA Technical Reports Server (NTRS)

Lawrence, J. A.

1981-01-01

The status of an effort to define the directions needed to take in extending pilot models is reported. These models are needed to perform closed-loop (man-in-the-loop) feedback flight control system designs and to develop cockpit display requirements. The approach taken is to develop a hypothetical working model of the human nervous system by reviewing the current literature in neurology and psychology and to develop a computer model of this hypothetical working model.

Working Together for a Competitive Workforce. A Handbook for State Policy Teams. Investing in People Project.

ERIC Educational Resources Information Center

Zinser, Jana

This handbook describes the methodology of the Investing in People Project, conducted in Connecticut, Iowa, Kentucky, Washington, and West Virginia to help states in assessing their current work force and economic development systems and in building more comprehensive, integrated, and effective strategies for improving the work force. The handbook…

Service Learning in an Undergraduate Social Work Research Course

ERIC Educational Resources Information Center

Postlethwait, Ariana

2012-01-01

The current study examined student experiences (n = 111) in an undergraduate social work (BSW) research seminar in which a service learning (SL) project was the primary focus. Student groups of approximately six or seven worked with local agencies to develop a research plan for the agency. Students found the SL project to be a positive experience.…

Involvement of Working Memory in Longitudinal Development of Number-Magnitude Skills

ERIC Educational Resources Information Center

Kolkman, Meijke E.; Kroesbergen, Evelyn H.; Leseman, Paul P. M.

2014-01-01

The ability to connect numbers and magnitudes is an important prerequisite for math learning, here referred to as number-magnitude skills. It has been proposed that working memory plays an important role in constructing these connections. The aim of the current study was to examine if working memory accounts for constructing these connections by…

How Technology Changes Demands for Human Skills. OECD Education Working Papers, No. 45

ERIC Educational Resources Information Center

Levy, Frank

2010-01-01

This paper places the competencies to be measured by the OECD's Programme for the International Assessment of Adult Competencies (PIAAC) in the context of the technological developments which are reshaping the nature of the workplace and work in the 21st century. The largest technological force currently shaping work is the computer. Computers are…

The Whole Person at Work: An Integrative Vocational Intervention Model for Women's Workplace Issues.

ERIC Educational Resources Information Center

Giordano, Francesca G.

1995-01-01

Explains a vocational intervention model, "the whole person at work group for faculty, staff, and community women": a group counseling approach designed to help women cope with work-related difficulties. Includes a brief overview of women's workplace issues and their connection to some current thoughts regarding women's identity development. (RJM)

Native People and the Social Work Profession: A Critical Exploration of Colonizing Problematics and the Development of Decolonized Thought.

ERIC Educational Resources Information Center

Waterfall, Barbara

2002-01-01

Discusses relationship between the social work profession and indigenous populations living in colonial Canada. Examines characteristics of Eurocentrism and historical and ongoing colonial processes, and implicates the profession of social work as a colonizing practice. Urges native people to disengage from current neo-colonial and constitutional…

Joseph Henry and the Telegraph

NASA Astrophysics Data System (ADS)

Hochfelder, David

1997-04-01

Morse's telegraph rested upon three scientific advances which occured between 1800 and 1830: the development of battery technology, the formulation of laws governing the behavior of electrical components in circuits, and the discovery of electromagnetic phenomena. Joseph Henry was crucial to the development of the early telegraph. His work on electromagnetism made it possible for the electric current to manifest itself as useful mechanical work. Henry developed electromagnets of sufficient lifting power, but which drew relatively small currents; these magnets were the heart of Morse's telegraph receiver. Morse also used electromagnets as relays, which allowed him to transmit signals over great distances. Morse often acknowledged his debt to Henry, and the two enjoyed a cordial working relationship until the mid-1840s. But during the bitter and protracted litigation over Morse's patent, Henry testified (unwillingly, he claimed) against the inventor. This began a lifelong quarrel between the two men, the specifics of which were tedious and petty. In general terms, however, their conflict arose over different notions regarding scientific discovery and technological innovation.

Aircraft Capability Management

NASA Technical Reports Server (NTRS)

Mumaw, Randy; Feary, Mike

2018-01-01

This presentation presents an overview of work performed at NASA Ames Research Center in 2017. The work concerns the analysis of current aircraft system management displays, and the initial development of an interface for providing information about aircraft system status. The new interface proposes a shift away from current aircraft system alerting interfaces that report the status of physical components, and towards displaying the implications of degradations on mission capability. The proposed interface describes these component failures in terms of operational consequences of aircraft system degradations. The research activity was an effort to examine the utility of different representations of complex systems and operating environments to support real-time decision making of off-nominal situations. A specific focus was to develop representations that provide better integrated information to allow pilots to more easily reason about the operational consequences of the off-nominal situations. The work is also seen as a pathway to autonomy, as information is integrated and understood in a form that automated responses could be developed for the off-nominal situations in the future.

[Development of a scale for work motivation of home care workers and influencing factors].

PubMed

Nakatani, Yasuhisa; Sugiura, Keiko; Mikami, Hiroshi

2009-02-01

To develop a scale for home care workers focusing on work motivation and to determine influential underlying factors. This study was an anonymous mailed survey of home care workers who provided home help services in July 2007. We collected information in the following areas: demographics of home care workers and care-recipients, burnout, stress, job satisfaction, life satisfaction, and self-esteem (SE). Hierarchical regression analysis was performed in order to identify factors related to work motivation. Construct validity was analyzed by factor analysis. Two subscales were obtained by the analysis and designated as "positive appraisal of the current state" (9 items) and "uplift of morale" (3 items). Content validity was analyzed by good-poor and item-total, and all correlations were strongly positive. Reliability was analyzed by internal consistency. Cronbach's ? values were 0.94 and 0.77, respectively. Concurrent validity was analyzed by correlation coefficient and a significant negative correlation was seen between the two subscales and burnout (r = -0.23--0.50), while positive correlations were noted for job or life satisfaction (r= 0.24-0.49). The positive influential factors on "positive appraisal of the current state" were satisfaction in 1) relation to care-recipients, 2) work environment for skill improvement and 3) the wages. The positive influential factors on "uplift of morale" were satisfaction with relation to care-recipients and their own life. This scale has sufficient reliability and validity. "Positive appraisal of the current state" and "uplift of morale" were confirmed as appropriate work motivation subscales for home care workers. Thus, support to augment job satisfaction with the work environment and wages appears to enhance "positive appraisal of the current state" and support to augment life satisfaction appears to enhance "uplift of morale".

The increasing globalization of health librarianship: a brief survey of international trends and activities.

PubMed

Madge, Bruce; Plutchak, T Scott

2005-09-01

Throughout his career, Leslie Morton was interested in international developments in health librarianship. In memory of the work he did in this field, the authors examine current developments in international health librarianship and describe some current themes. The authors draw from their combined experience in international activities and the published information available from selected library associations and related organizations. Although many of the major health library associations around the world are tackling agendas specific to their own country, issues of international concern are emerging in common. These are grouped around globalization, partnerships and co-operation, electronic access, especially open access, and working with the developing world in a number of different ways. Of course, the basis of all of these initiatives is to improve the health of the population by providing the best possible access to materials. Professional associations can provide a useful institutional infrastructure for addressing issues of international interest. Librarians should encourage their associations to develop these international initiatives and to seek out new and innovative ways to work together across international boundaries.

Realising their potential? Exploring interprofessional perceptions and potential of the advanced practitioner role: a qualitative analysis

PubMed Central

Powell, Tom; Watkins, Dianne; Kelly, Daniel

2015-01-01

Objectives To explore perceptions of the current practice and future potential of advanced practitioners (APs) from the perspectives of different professional groups in Wales UK. Design A qualitative study consisting of nine focus group interviews. Methods Initially verbatim transcriptions of each focus group interviews were analysed thematically before themes were merged to represent perceptions for the whole data set. Participants Data were gathered from a total of 67 stakeholders—including APs from a variety of professional groups (eg, nursing, physiotherapy, paramedics) as well as managers, workforce developers, educators and medical staff who have a role developing and supporting APs in practice. Results The results are presented in four themes: (1) demand, policy context and future priorities, (2) role clarity and standardisation, (3) agreement and understanding of the role and (4) interprofessional working. The context within which current and future AP roles were considered was influenced by inexorable demands for healthcare and the requirements to meet health policy priorities. Developing AP roles were hampered currently by a lack of shared understanding and ‘joined-up’ working between different groups such as medical practitioners, managers, commissioners and educators. Conclusions For the AP role to flourish more ‘joined-up’ thinking, support and development opportunities are required between APs, managers, senior clinicians, commissioners and educators. Working together to plan and deliver education, innovation and service delivery is of prime importance to meeting ever increasing complex health needs. This will ensure that future APs are adequately prepared and supported to reach their full potential and help deliver necessary innovations in current models of care delivery. PMID:26656024

Organizational Science

ERIC Educational Resources Information Center

Beriwal, Madhu; Clegg, Stewart; Collopy, Fred; McDaniel, Reuben, Jr.; Morgan, Gareth; Sutcliffe, Kathleen; Kaufman, Roger; Marker, Anthony; Selwyn, Neil

2013-01-01

Scholars representing the field of organizational science, broadly defined as including many fields--organizational behavior and development, management, workplace performance, and so on--were asked to identify what they considered to be the most exciting and imaginative work currently being done in their field, as well as how that work might…

Work-related factors, job satisfaction and intent to leave the current job among United States nurses.

PubMed

Han, Kihye; Trinkoff, Alison M; Gurses, Ayse P

2015-11-01

To examine the relationships of work-related factors (e.g., autonomy, work schedule, supervisory and peer support) to nurses' job satisfaction and intent to leave their current position. Low job satisfaction and high turnover of nurses are major problems for health care. To improve nurse retention, work-related factors associated with job satisfaction and intent to leave should be investigated. A cross-sectional secondary data analysis. Data were obtained in 2004 from Wave 3 of the Nurses' Worklife and Health Study. A random sample of 5000 actively licenced nurses in Illinois and North Carolina (two U.S. states) were sent the survey in wave 1, of which 1641 actively working bedside nurses participated in wave 3. We examined associations of various work-related factors with job satisfaction and intent to leave the current position. Nurses who were dissatisfied with their job reported significantly higher psychological demands and lower autonomy than nurses who were satisfied. Nurses were significantly less satisfied with their jobs when they worked longer hours with inadequate breaks or sick days. Lack of support from peers and supervisors was also related to significantly lower odds of job satisfaction. For intention to leave, nurses who said they planned to leave their current job reported significantly lower autonomy and less support from their peers than nurses who intended to stay. A variety of modifiable work-related factors were significantly related to job satisfaction and intention to leave the current job among nurses. Future research should focus on developing interventions that could mitigate these factors (e.g., by improving work schedules, increasing autonomy and/or nurse support). The impact of such interventions on job satisfaction and intention to leave the current position could then be evaluated. To increase nurse retention, improved schedules, autonomy and supportive work environments should be promoted. © 2015 John Wiley & Sons Ltd.

Fundamental Aeronautics Program: Overview of Project Work in Supersonic Cruise Efficiency

NASA Technical Reports Server (NTRS)

Castner, Raymond

2011-01-01

The Supersonics Project, part of NASA?s Fundamental Aeronautics Program, contains a number of technical challenge areas which include sonic boom community response, airport noise, high altitude emissions, cruise efficiency, light weight durable engines/airframes, and integrated multi-discipline system design. This presentation provides an overview of the current (2011) activities in the supersonic cruise efficiency technical challenge, and is focused specifically on propulsion technologies. The intent is to develop and validate high-performance supersonic inlet and nozzle technologies. Additional work is planned for design and analysis tools for highly-integrated low-noise, low-boom applications. If successful, the payoffs include improved technologies and tools for optimized propulsion systems, propulsion technologies for a minimized sonic boom signature, and a balanced approach to meeting efficiency and community noise goals. In this propulsion area, the work is divided into advanced supersonic inlet concepts, advanced supersonic nozzle concepts, low fidelity computational tool development, high fidelity computational tools, and improved sensors and measurement capability. The current work in each area is summarized.

Fundamental Aeronautics Program: Overview of Propulsion Work in the Supersonic Cruise Efficiency Technical Challenge

NASA Technical Reports Server (NTRS)

Castner, Ray

2012-01-01

The Supersonics Project, part of NASA's Fundamental Aeronautics Program, contains a number of technical challenge areas which include sonic boom community response, airport noise, high altitude emissions, cruise efficiency, light weight durable engines/airframes, and integrated multi-discipline system design. This presentation provides an overview of the current (2012) activities in the supersonic cruise efficiency technical challenge, and is focused specifically on propulsion technologies. The intent is to develop and validate high-performance supersonic inlet and nozzle technologies. Additional work is planned for design and analysis tools for highly-integrated low-noise, low-boom applications. If successful, the payoffs include improved technologies and tools for optimized propulsion systems, propulsion technologies for a minimized sonic boom signature, and a balanced approach to meeting efficiency and community noise goals. In this propulsion area, the work is divided into advanced supersonic inlet concepts, advanced supersonic nozzle concepts, low fidelity computational tool development, high fidelity computational tools, and improved sensors and measurement capability. The current work in each area is summarized.

Mitochondrial DNA disease—molecular insights and potential routes to a cure

DOE Office of Scientific and Technical Information (OSTI.GOV)

Russell, Oliver; Turnbull, Doug, E-mail: doug.turnbull@newcastle.ac.uk

2014-07-01

Mitochondrial DNA diseases are common neurological conditions caused by mutations in the mitochondrial genome or nuclear genes responsible for its maintenance. Current treatments for these disorders are focussed on the management of the symptoms, rather than the correction of biochemical defects caused by the mutation. This review focuses on the molecular effects of mutations, the symptoms they cause and current work focusing on the development of targeted treatments for mitochondrial DNA disease. - Highlights: • We discuss several common disease causing mtDNA mutations. • We highlight recent work linking pathogenicity to deletion size and heteroplasmy. • We discuss recent advancesmore » in the development of targeted mtDNA disease treatments.« less

Effective factor of virtual team: Resolving communication breakdown in IBS construction project

NASA Astrophysics Data System (ADS)

Pozin, Mohd Affendi Ahmad; Nawi, Mohd. Nasrun Mohd.

2016-08-01

Currently, rapid development of information technology has provided new opportunities to organisation toward increasing the effectiveness of collaboration and teamwork management. Thus the virtual team approach has been implemented in numerous of field. However, there is limited study of virtual team in construction project management. Currently IBS project is still based on traditional construction process which is isolation team working environment. Therefore this approach has been declared as a main barrier to ensure cooperative working relation in term of communication and information in between project stakeholders. Thus, this paper through literature review is attempted to present a discussion of the virtual team approach toward IBS project in developing effective team communication during construction project.

Capturing Nanotechnology's Current State of Development via Analysis of Patents. OECD Science, Technology and Industry Working Papers, 2007/4

ERIC Educational Resources Information Center

Igami, Masatsura; Okazaki, Teruo

2007-01-01

This analysis aims at capturing current inventive activities in nanotechnologies based on the analysis of patent applications to the European Patent Office (EPO). Reported findings include: (1) Nanotechnology is a multifaceted technology, currently consisting of a set of technologies on the nanometre scale rather than a single technological field;…

Whose Development? Salvaging the Concept of Development within a Sociocultural Approach to Education

ERIC Educational Resources Information Center

Matusov, Eugene; DePalma, Renee; Drye, Stephanie

2007-01-01

The concept of development is currently under revision in education and psychology. In this essay, Eugene Matusov, Renee DePalma, and Stephanie Drye examine a traditional notion of development and provide an alternative sociocultural view. As educators working within a sociocultural approach to learning, development, and education, the authors see…

Modelling the transient behaviour of pulsed current tungsten-inert-gas weldpools

NASA Astrophysics Data System (ADS)

Wu, C. S.; Zheng, W.; Wu, L.

1999-01-01

A three-dimensional model is established to simulate the pulsed current tungsten-inert-gas (TIG) welding process. The goal is to analyse the cyclic variation of fluid flow and heat transfer in weldpools under periodic arc heat input. To this end, an algorithm, which is capable of handling the transience, nonlinearity, multiphase and strong coupling encountered in this work, is developed. The numerical simulations demonstrate the transient behaviour of weldpools under pulsed current. Experimental data are compared with numerical results to show the effectiveness of the developed model.

The development of strategy use in elementary school children: working memory and individual differences.

PubMed

Imbo, Ineke; Vandierendonck, André

2007-04-01

The current study tested the development of working memory involvement in children's arithmetic strategy selection and strategy efficiency. To this end, an experiment in which the dual-task method and the choice/no-choice method were combined was administered to 10- to 12-year-olds. Working memory was needed in retrieval, transformation, and counting strategies, but the ratio between available working memory resources and arithmetic task demands changed across development. More frequent retrieval use, more efficient memory retrieval, and more efficient counting processes reduced the working memory requirements. Strategy efficiency and strategy selection were also modified by individual differences such as processing speed, arithmetic skill, gender, and math anxiety. Short-term memory capacity, in contrast, was not related to children's strategy selection or strategy efficiency.

Organization Development in Mental Health Services.

ERIC Educational Resources Information Center

Glaser, Edward M.; Backer, Thomas E.

1979-01-01

The term "organization development" (OD) encompasses techniques developed to facilitate communication and collaborative problem solving in work groups. This discussion focuses on defining OD, describing its current use in mental health and human service organizations, and assessing potential payoffs and disadvantages of implementing OD programs in…

Algorithms and architectures for robot vision

NASA Technical Reports Server (NTRS)

Schenker, Paul S.

1990-01-01

The scope of the current work is to develop practical sensing implementations for robots operating in complex, partially unstructured environments. A focus in this work is to develop object models and estimation techniques which are specific to requirements of robot locomotion, approach and avoidance, and grasp and manipulation. Such problems have to date received limited attention in either computer or human vision - in essence, asking not only how perception is in general modeled, but also what is the functional purpose of its underlying representations. As in the past, researchers are drawing on ideas from both the psychological and machine vision literature. Of particular interest is the development 3-D shape and motion estimates for complex objects when given only partial and uncertain information and when such information is incrementally accrued over time. Current studies consider the use of surface motion, contour, and texture information, with the longer range goal of developing a fused sensing strategy based on these sources and others.

Assessment of government tribology programs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Peterson, M.B.; Levinson, T.M.

1985-09-01

An assessment has been made to determine current tribology research and development work sponsored or conducted by the government. Data base surveys and discussions were conducted to isolate current projects sponsored primarily by 21 different government organizations. These projects were classified by subject, objective, energy relevance, type of research, phenomenon being investigated, variables being studied, type of motion, materials and application. An abstract of each project was prepared which included the classification, sponsor, performing organization and a project description. It was found that current work is primarily materials oriented to meet military requirements. Other than the high temperature programs verymore » few of the tribology projects accomplish energy related objectives.« less

Protecting an endangered species: the contribution and constraints of nurses working in a specialist role.

PubMed

McCorkell, Gillian; Brown, Geraldine; Michaelides, Bernie; Coates, Vivien

2015-03-01

The project aims to assess current specialist practice in relation to the new and ever-changing healthcare climate and explore some of the issues that specialist nurses encounter. The current financial recession is driving a range of economic policy changes and consequently service provision, in particular the work and impact of nurses working in a specialist role, being examined. This has resulted in many specialist nurses feeling very vulnerable. A cross sectional survey was completed by nurses working in specialist roles (n = 96) in a large health and social care setting in the United Kingdom. A response rate of 62% was achieved: 44% provide nurse led clinics and 42% are nurse prescribers. The mean length of time qualified as a registered nurse was 27 years. Less than a third felt that the current computer system for activity recording reflected their current workload and 65% needed administrative support. This study demonstrates the insufficient resources available to specialist nurses resulting in inappropriate but necessary, use of time and restricted opportunities for learning and development. © 2013 John Wiley & Sons Ltd.

Modelling eWork in Europe: Estimates, Models and Forecasts from the EMERGENCE Project. IES Report.

ERIC Educational Resources Information Center

Bates, P.; Huws, U.

A study combined results of a survey of employers in 18 European countries to establish the extent to which they are currently using eWork with European official statistics to develop models, estimates, and forecasts of the numbers of eWorkers in Europe. These four types of "individual" eWork were identified: telehomeworking;…

Learning together, working together: an evaluation of experiences of a pilot programme for partnership between unions and management in the health service.

PubMed

Young, Pat; Moule, Pam; Evans, David; Simmons, Sue; Crack, Meg; Mayo, Gillian

2012-07-01

This article describes an innovative initiative to support partnership working between trade unions and management in three National Health Service Trusts, by means of shared participation in a series of learning and development days. Although there is existing evidence, within the literature on partnership, of the benefits of partnership working for employees and employers, there is little discussion of processes by which effective partnership is developed. More specifically, there is no current academic literature on the role of education in enabling improved partnership working between trade unions and managers. The findings of the evaluation suggest that the pilot provided a successful learning experience as well as a number of pointers for improving future developments of this nature. The recommendations include embedding of partnership work within existing staff development processes. Copyright © 2011 Elsevier Ltd. All rights reserved.

Generic Engineering Competencies: A Review and Modelling Approach

ERIC Educational Resources Information Center

Male, Sally A.

2010-01-01

This paper puts forward the view that engineering educators have a responsibility to prepare graduates for engineering work and careers. The current literature reveals gaps between the competencies required for engineering work and those developed in engineering education. Generic competencies feature in these competency gaps. Literature suggests…

Working with Chronically Dysfunctional Families.

ERIC Educational Resources Information Center

Younger, Robert; And Others

This paper reviews family therapy with chronically dysfunctional families including the development of family therapy and current trends which appear to give little guidance toward working with severely dysfunctional families. A theoretical stance based upon the systems approach to family functioning and pathology is presented which suggests: (1)…

LDRD Annual Report.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sweany, Melinda

2017-10-01

This is a high-risk effort to leverage knowledge gained from previous work, which focused on detector development leading to better energy resolution and reconstruction errors. This work seeks to enable applications that require precise elemental characterization of materials, such as chemical munitions remediation, offering the potential to close current detection gaps.

Bipolar Ag-Zn battery

NASA Astrophysics Data System (ADS)

Giltner, L. John

1994-02-01

The silver-zinc (AgZn) battery system has been unique in its ability to safely satisfy high power demand applications with low mass and volume. However, a new generation of defense, aerospace, and commercial applications will impose even higher power demands. These new power demands can be satisfied by the development of a bipolar battery design. In this configuration the power consuming, interelectrode current conductors are eliminated while the current is then conducted via the large cross-section electrode substrate. Negative and positive active materials are applied to opposite sides of a solid silver foil substrate. In addition to reducing the weight and volume required for a specified power level, the output voltage performance is also improved as follows. Reduced weight through: elimination of the plastic cell container; elimination of plate leads and intercell connector; and elimination of internal plate current collector. Increased voltage through: elimination of resistance of current collector; elimination of resistance of plate lead; and elimination of resistance of intercell connector. EPI worked previously on development of a secondary bipolar silver zinc battery. This development demonstrated the electrical capability of the system and manufacturing techniques. One difficulty with this development was mechanical problems with the seals. However, recent improvements in plastics and adhesives should eliminate the major problem of maintaining a seal around the periphery of the bipolar module. The seal problem is not as significant for a primary battery application or for a requirement for only a few discharge cycles. A second difficulty encountered was with activation (introducing electrolyte into the cell) and with venting gas from the cell without loss of electrolyte. During previous work, the following projections for energy density were made from test data for a high power system which demonstrated in excess of 50 discharge/charge cycles. Projected system power = 100 kilowatts; discharge time = 30 seconds; discharge current density = 1.75 amps/sq in.; system weight = 86 lbs (9.7 WH/lb); and system volume = 1071 cu. in. (.78 WH/cu. in.). EPI is currently working on a development program to produce a bipolar silver-zinc battery design for NASA. The potential application would be to power electromechanical actuators for space launch vehicles.

Bipolar Ag-Zn battery

NASA Technical Reports Server (NTRS)

Giltner, L. John

1994-01-01

The silver-zinc (AgZn) battery system has been unique in its ability to safely satisfy high power demand applications with low mass and volume. However, a new generation of defense, aerospace, and commercial applications will impose even higher power demands. These new power demands can be satisfied by the development of a bipolar battery design. In this configuration the power consuming, interelectrode current conductors are eliminated while the current is then conducted via the large cross-section electrode substrate. Negative and positive active materials are applied to opposite sides of a solid silver foil substrate. In addition to reducing the weight and volume required for a specified power level, the output voltage performance is also improved as follows. Reduced weight through: elimination of the plastic cell container; elimination of plate leads and intercell connector; and elimination of internal plate current collector. Increased voltage through: elimination of resistance of current collector; elimination of resistance of plate lead; and elimination of resistance of intercell connector. EPI worked previously on development of a secondary bipolar silver zinc battery. This development demonstrated the electrical capability of the system and manufacturing techniques. One difficulty with this development was mechanical problems with the seals. However, recent improvements in plastics and adhesives should eliminate the major problem of maintaining a seal around the periphery of the bipolar module. The seal problem is not as significant for a primary battery application or for a requirement for only a few discharge cycles. A second difficulty encountered was with activation (introducing electrolyte into the cell) and with venting gas from the cell without loss of electrolyte. During previous work, the following projections for energy density were made from test data for a high power system which demonstrated in excess of 50 discharge/charge cycles. Projected system power = 100 kilowatts; discharge time = 30 seconds; discharge current density = 1.75 amps/sq in.; system weight = 86 lbs (9.7 WH/lb); and system volume = 1071 cu. in. (.78 WH/cu. in.). EPI is currently working on a development program to produce a bipolar silver-zinc battery design for NASA. The potential application would be to power electromechanical actuators for space launch vehicles.

Weak decays and double beta decay

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nicholson, H.W.

1983-08-01

Work to measure the ..sigma../sup +/ 0 degree differential cross section in the reaction K/sup -/p ..-->.. ..sigma../sup +/..pi../sup -/ at several incident K/sup -/ momenta between 600 and 800 MeV/c as well as the asymmetries in the decays of polarized ..sigma../sup +/'s into protons and neutral pions and of polarized ..sigma../sup -/'s into neutrons and negative pions in collaboration with experimenters from Yale, Brookhaven, and the University of Pittsburgh (Brookhaven experiment 702) has been completed. Data from this experiment is currently being analyzed at Yale. Work is currently underway to develop and construct an experiment to search for neutrinolessmore » double beta decay in thin foils of Mo/sup 100/ in collaboration with experimenters from Lawrence Berkeley Laboratory. Development work on the solid state silicon detectors should be complete in the next six months and construction should e well underway within the next year.« less

Human Factors and Modeling Methods in the Development of Control Room Modernization Concepts

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hugo, Jacques V.; Slay III, Lorenzo

nuclear power plants. Although the nuclear industry has made steady improvement in outage optimization, each day of a refueling outage still represents an opportunity to save millions of dollars and each day an outage extends past its planned end date represents millions of dollars that may have been spent unnecessarily. Reducing planned outage duration or preventing outage extensions requires careful management of the outage schedule as well as constant oversight and monitoring of work completion during the outage execution. During a typical outage, there are typically more than 10,000 activities on the schedule that, if not managed efficiently, may causemore » expensive outage delays. Management of outages currently relies largely on paper-based resources and general-purpose office software. A typical tool currently used to monitor work performance is a burn-down curve, where total remaining activities are plotted against the baseline schedule to track bulk work completion progress. While these tools are useful, there is still considerable uncertainty during a typical outage that bulk work progress is adequate and therefore a lot of management time is spent analyzing the situation on a daily basis. This paper describes recent advances made in developing a framework for the design of visual outage information presentation, as well as an overview of the scientific principles that informed the development of the visualizations. To test the utility of advanced visual outage information presentation, an outage management dashboard software application was created as part of the Department of Energy’s Advanced Outage Control Center project. This dashboard is intended to present all the critical information an outage manager would need to understand the current status of a refueling outage. The dashboard presents the critical path, bulk work performance, key performance indicators, outage milestones and metrics relating current performance to historical performance. Additionally, the dashboard includes data analysis tools to allow outage managers to drill down into the underlying data to understand the drivers of the indicators.« less

Electronics for Piezoelectric Smart Structures

NASA Technical Reports Server (NTRS)

Warkentin, D. J.; Tani, J.

1997-01-01

This paper briefly presents work addressing some of the basic considerations for the electronic components used in smart structures incorporating piezoelectric elements. After general remarks on the application of piezoelectric elements to the problem of structural vibration control, three main topics are described. Work to date on the development of techniques for embedding electronic components within structural parts is presented, followed by a description of the power flow and dissipation requirements of those components. Finally current work on the development of electronic circuits for use in an 'active wall' for acoustic noise is introduced.

Inclusivity Imperatives and the Australian National Curriculum

ERIC Educational Resources Information Center

Berlach, Richard G.; Chambers, Dianne J.

2011-01-01

With work currently being undertaken on formulating Australia's first national curriculum, now seems an opportune time to review the current state of play with regard to how well inclusivity is being represented in the developing documentation. An accurate understanding of "what is" is often the first step in preparing for "what may…

The Orientation Theory of Dyslexia: Uniting Current Schisms through an Ecological Perspective

ERIC Educational Resources Information Center

Poole, Jennifer

2010-01-01

In earlier work the concept of "Orientation" (O) was proposed as the key factor in successful literacy acquisition. This article develops that idea further to discuss the potential of "Orientation Theory" (OT) to unite current conflicts between apparently opposing theories of dyslexia. After briefly outlining these theoretical…

Job satisfaction in relation to energy resource consciousness and perceptions of energy utilization in selected Illinois manufacturing firms

DOE Office of Scientific and Technical Information (OSTI.GOV)

Haynes, T.S.

1986-01-01

This study was developed through a synthesis and review of literature and research related to the current status of job satisfaction, energy resources, and perceptions of how energy is utilized in the manufacturing work environment. This synthesis and review revolved around several proven contributing factors of job satisfaction, such as age, education, and challenge from work itself. Quality of work life programs and their components are discussed in relation to their impact on job satisfaction. The nature of energy resource utilization is traced back through history with an emphasis on the limitations of current resources and options for the future.more » The review highlights the current debate over what should be the future path of energy resource development. The concept of satisfaction of human needs is reviewed and related to job satisfaction and energy resources. The purpose of this research study was to contribute to the understanding of how perceptions of energy resources relate to job satisfaction. Results of the study indicated that there were no significant differences between an individual's energy resource consciousness and perceptions of energy utilization in the work place, energy resource consciousness and job satisfaction, and job satisfaction and perceptions of energy utilization in the workplace.« less

Fabrication and Testing of CERMET Fuel Materials for Nuclear Thermal Propulsion

NASA Technical Reports Server (NTRS)

Hickman, Robert; Broadway, Jeramie; Mireles, Omar

2012-01-01

A first generation Nuclear Cryogenic Propulsion Stage (NCPS) based on Nuclear Thermal Propulsion (NTP) is currently being developed for Advanced Space Exploration Systems. The overall goal of the project is to address critical NTP technology challenges and programmatic issues to establish confidence in the affordability and viability of NTP systems. The current technology roadmap for NTP identifies the development of a robust fuel form as a critical near term need. The lack of a qualified nuclear fuel is a significant technical risk that will require a considerable fraction of program resources to mitigate. Due to these risks and the cost for qualification, the development and selection of a primary fuel must begin prior to Authority to Proceed (ATP) for a specific mission. The fuel development is a progressive approach to incrementally reduce risk, converge the fuel materials, and mature the design and fabrication process of the fuel element. A key objective of the current project is to advance the maturity of CERMET fuels. The work includes fuel processing development and characterization, fuel specimen hot hydrogen screening, and prototypic fuel element testing. Early fuel materials development is critical to help validate requirements and fuel performance. The purpose of this paper is to provide an overview and status of the work at Marshall Space Flight Center (MSFC).

Control approach development for variable recruitment artificial muscles

NASA Astrophysics Data System (ADS)

Jenkins, Tyler E.; Chapman, Edward M.; Bryant, Matthew

2016-04-01

This study characterizes hybrid control approaches for the variable recruitment of fluidic artificial muscles with double acting (antagonistic) actuation. Fluidic artificial muscle actuators have been explored by researchers due to their natural compliance, high force-to-weight ratio, and low cost of fabrication. Previous studies have attempted to improve system efficiency of the actuators through variable recruitment, i.e. using discrete changes in the number of active actuators. While current variable recruitment research utilizes manual valve switching, this paper details the current development of an online variable recruitment control scheme. By continuously controlling applied pressure and discretely controlling the number of active actuators, operation in the lowest possible recruitment state is ensured and working fluid consumption is minimized. Results provide insight into switching control scheme effects on working fluids, fabrication material choices, actuator modeling, and controller development decisions.

Identity Development in German Emerging Adults: Not an Easy Task

ERIC Educational Resources Information Center

Seiffge-Krenke, Inge; Haid, Marja-Lena

2012-01-01

In this chapter, we review identity development in German youth as well as the impact of German cultural history on difficulties in developing a sense of national identity. Current socioeconomic and political contexts, such as instability of labor markets and prolonged transitions to work and partnership, are likely to affect identity development.…

The Link between Age, Career Goals, and Adaptive Development for Work-Related Learning among Local Government Employees

ERIC Educational Resources Information Center

Tones, Megan; Pillay, Hitendra; Kelly, Kathy

2011-01-01

More recently, lifespan development psychology models of adaptive development have been applied to the workforce to investigate ageing worker and lifespan issues. The current study uses the Learning and Development Survey (LDS) to investigate employee selection and engagement of learning and development goals and opportunities and constraints for…

Adolescence in the 1990s. Risk and Opportunity.

ERIC Educational Resources Information Center

Takanishi, Ruby, Ed.

This collection, which grew out of the work of the Carnegie Council on Adolescent Development, presents chapters by some thoughtful and influential people who are currently studying and working with adolescents. Their perspectives provide valuable insight into the situation of the adolescent in today's climate. Chapters include: (1) "Changing…

Modelling and Simulation for Requirements Engineering and Options Analysis

DTIC Science & Technology

2010-05-01

should be performed to work successfully in the domain; and process-based techniques model the processes that occur in the work domain. There is a crisp ...acad/sed/sedres/ dm /erg/cwa. DRDC Toronto CR 2010-049 39 23. Can the current technique for developing simulation models for assessments

Academic Planning through Program Review: Can It Work?

ERIC Educational Resources Information Center

Fernandez, Thomas V.; Raab, Marjorie K.

Nassau Community College (NCC) is currently working with a program evaluation model in which faculty from one department serve as peer evaluation consultants to direct the self-evaluations of other departments. The four functional objectives initially motivating the development of NCC's plan directed that: real decisions about academic programs…

77 FR 20789 - Work Group on Measuring Systems for Taxis

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-06

.... SUMMARY: The National Institute of Standards and Technology (NIST) is forming a Work Group (WG) to develop proposals to revise the current Taximeters Code in NIST Handbook 44 (HB 44), Specifications, Tolerances, and... CONTACT: Mr. John Barton, NIST, Office of Weights and Measures, 100 Bureau Drive, Stop 2600, Gaithersburg...

The relationship between agreeableness and the development of the working alliance in patients with borderline personality disorder.

PubMed

Hirsh, Jacob B; Quilty, Lena C; Bagby, R Michael; McMain, Shelley F

2012-08-01

The working alliance between therapist and patient is an important component of effective interventions for borderline personality disorder (BPD). The current study examines whether client personality affects the development of the working alliance during the treatment of BPD, and whether this influences treatment effectiveness. Data was based on 87 patients with BPD who were participants in a randomized controlled trial comparing Dialectical Behavior Therapy (DBT) and general psychiatric management. Higher levels of trait Agreeableness were associated with steeper increases in working alliance throughout treatment, but only in the DBT condition. Increases in working alliance were in turn associated with better clinical outcomes. Mediation models revealed a significant indirect path from Agreeableness to better clinical outcomes, mediated through larger improvements in working alliance over time. These results highlight the role that patient personality can play during the therapeutic process, with a specific focus on the importance of Agreeableness for alliance development.

The Development of the Concept of Work: A Case where History Can Inform Pedagogy

NASA Astrophysics Data System (ADS)

de Berg, Kevin C.

An historical analysis of the work concept with particular emphasis given to the contributions of John Smeaton and Daniel Bernouilli is provided with a view to enlightening or resolving current difficulties experienced in the teaching and learning of the concept of work and its relationship to kinetic and potential energies. An approach which emphasises the work done by both applied and resisting forces and which gives some technological significance to the (force x distance) definition of work is recommended.

Review on pen-and-paper-based observational methods for assessing ergonomic risk factors of computer work.

PubMed

Rahman, Mohd Nasrull Abdol; Mohamad, Siti Shafika

2017-01-01

Computer works are associated with Musculoskeletal Disorders (MSDs). There are several methods have been developed to assess computer work risk factor related to MSDs. This review aims to give an overview of current techniques available for pen-and-paper-based observational methods in assessing ergonomic risk factors of computer work. We searched an electronic database for materials from 1992 until 2015. The selected methods were focused on computer work, pen-and-paper observational methods, office risk factors and musculoskeletal disorders. This review was developed to assess the risk factors, reliability and validity of pen-and-paper observational method associated with computer work. Two evaluators independently carried out this review. Seven observational methods used to assess exposure to office risk factor for work-related musculoskeletal disorders were identified. The risk factors involved in current techniques of pen and paper based observational tools were postures, office components, force and repetition. From the seven methods, only five methods had been tested for reliability. They were proven to be reliable and were rated as moderate to good. For the validity testing, from seven methods only four methods were tested and the results are moderate. Many observational tools already exist, but no single tool appears to cover all of the risk factors including working posture, office component, force, repetition and office environment at office workstations and computer work. Although the most important factor in developing tool is proper validation of exposure assessment techniques, the existing observational method did not test reliability and validity. Futhermore, this review could provide the researchers with ways on how to improve the pen-and-paper-based observational method for assessing ergonomic risk factors of computer work.

Modelling and Display of the Ultraviolet Sky

NASA Astrophysics Data System (ADS)

Daniels, J.; Henry, R.; Murthy, J.; Allen, M.; McGlynn, T. A.; Scollick, K.

1994-12-01

A computer program is currently under development to model in 3D - one dimension of which is wavelength - all the known and major speculated sources of ultraviolet (900 A - 3100 A ) radiation over the celestial sphere. The software is being written in Fortran 77 and IDL and currently operates under IRIX (the operating system of the Silicon Graphics Iris Machine); all output models are in FITS format. Models along with display software will become available to the astronomical community. The Ultraviolet Sky Model currently includes the Zodiacal Light, Point Sources of Emission, and the Diffuse Galactic Light. The Ultraviolet Sky Model is currently displayed using SkyView: a package under development at NASA/ GSFC, which allows users to retrieve and display publically available all-sky astronomical survey data (covering many wavebands) over the Internet. We present a demonstration of the SkyView display of the Ultraviolet Model. The modelling is a five year development project: the work illustrated here represents product output at the end of year one. Future work includes enhancements to the current models and incorporation of the following models: Galactic Molecular Hydrogen Fluorescence; Galactic Highly Ionized Atomic Line Emission; Integrated Extragalactic Light; and speculated sources in the intergalactic medium such as Ionized Plasma and radiation from Non-Baryonic Particle Decay. We also present a poster which summarizes the components of the Ultraviolet Sky Model and outlines a further package that will be used to display the Ultraviolet Model. This work is supported by United States Air Force Contract F19628-93-K-0004. Dr J. Daniels is supported with a post-doctoral Fellowship from the Leverhulme Foundation, London, United Kingdom. We are also grateful for the encouragement of Dr Stephen Price (Phillips Laboratory, Hanscomb Air Force Base, MA)

The Career Development Process for Women: Current Views and Programs

ERIC Educational Resources Information Center

Hansen, L. Sunny

1975-01-01

The article discusses (1) female career patterns, (2) female self-concepts and aspirations, and (3) women in the work force. Also discussed are occupational distribution and obstacles to the career development of women. Presented at the Annual Conference on Career Development and Vocational Education, Blacksburg, Virginia, March, 1974. (BW)

Promising Directions for Research and Development in Early Childhood Education.

ERIC Educational Resources Information Center

Elliott, David L.

A survey of research and development studies currently needed in early childhood education stresses child development and its relation to instruction. Topics which have been discussed are perception, oral language, concept formation, learning set, motivation, and the psychology of learning. Universities and public school systems working together…

Real-time 3D radiation risk assessment supporting simulation of work in nuclear environments.

PubMed

Szőke, I; Louka, M N; Bryntesen, T R; Bratteli, J; Edvardsen, S T; RøEitrheim, K K; Bodor, K

2014-06-01

This paper describes the latest developments at the Institute for Energy Technology (IFE) in Norway, in the field of real-time 3D (three-dimensional) radiation risk assessment for the support of work simulation in nuclear environments. 3D computer simulation can greatly facilitate efficient work planning, briefing, and training of workers. It can also support communication within and between work teams, and with advisors, regulators, the media and public, at all the stages of a nuclear installation's lifecycle. Furthermore, it is also a beneficial tool for reviewing current work practices in order to identify possible gaps in procedures, as well as to support the updating of international recommendations, dissemination of experience, and education of the current and future generation of workers.IFE has been involved in research and development into the application of 3D computer simulation and virtual reality (VR) technology to support work in radiological environments in the nuclear sector since the mid 1990s. During this process, two significant software tools have been developed, the VRdose system and the Halden Planner, and a number of publications have been produced to contribute to improving the safety culture in the nuclear industry.This paper describes the radiation risk assessment techniques applied in earlier versions of the VRdose system and the Halden Planner, for visualising radiation fields and calculating dose, and presents new developments towards implementing a flexible and up-to-date dosimetric package in these 3D software tools, based on new developments in the field of radiation protection. The latest versions of these 3D tools are capable of more accurate risk estimation, permit more flexibility via a range of user choices, and are applicable to a wider range of irradiation situations than their predecessors.

Counsel from a Former Editor and the Current Editor: Successful Research and Writing for Publication in the Journal of Humanistic Counseling, Education and Development

ERIC Educational Resources Information Center

McGowan, A. Scott; Scholl, Mark B.

2004-01-01

Getting published is a great joy that generally is preceded by hard work and frustration for both the neophyte author and the established scholar. Although the process of becoming published can be harrowing and exasperating, it is also a rewarding one, from the development of an idea to its appearance in print. The goal of seeing a work published…

Enhancing Motivation for Learning and Work.

ERIC Educational Resources Information Center

Kirkhorn, Judith

1988-01-01

Discusses motivation based on adult learning conditions, and suggests appropriate motivation plans for leaders and trainers that will enhance performance. The steps to develop motivation plans include assessing current thinking on motivation and reinforcement options; objectively describing expected behaviors; and developing motivational…

The Current Working Conditions in Ugandan Apparel Assembly Plants.

PubMed

Tebyetekerwa, Mike; Akankwasa, Nicholus Tayari; Marriam, Ifra

2017-12-01

The present rapid shift of industrialization from developed to developing countries requires developing countries to understand issues related to work organization, management, and working conditions. There are many factors slackening production, of which working conditions is part. A complete inquiry into the workers' working conditions can enable managements to reduce risks in the workplaces and improve productivity. Understanding and awareness of the benefits of workplace research and a probe into the working conditions in the Ugandan apparel assembly plants are urgently required. A total of 103 (70 women and 33 men) workers from five different plants were interviewed. Together with the top management of various plants, questionnaires about the workers' opinions of their physical working conditions were prepared. Data was collected using two methods: (1) questionnaire; and (2) observation of the workers during their work. The results indicated that poor plant working conditions were mainly contributed by the workers' social factors and the management policies. The government, together with the management, should work to improve the working conditions in the apparel assembly plants, as it greatly affects both.

Development of Social Work Education in China: Background, Current Status, and Prospects

ERIC Educational Resources Information Center

Li, Yingsheng; Han, Wen-Jui; Huang, Chien-Chung

2012-01-01

China's social work education dates back to the 1920s, but the profession disappeared for 36 years after the establishment of the People's Republic of China. Not until the late 1980s was social work education in China revived. At the turn of the new century, the Central Committee of the Chinese Communist Party and the State Council supported the…

Large angle magnetic suspension test fixture

NASA Technical Reports Server (NTRS)

Britcher, Colin P. (Principal Investigator); Huang, Jen-Kuang (Principal Investigator)

1996-01-01

Good progress is being made in several major areas. These include eddy current modelling and analysis, design optimization methods, wind tunnel Magnetic Suspension and Balance Systems (MSBS), payload pointing and vibration isolation systems, and system identification. In addition, another successful International Symposium has been completed, with the Proceedings being printed at the time of writing. These activities continue current work under this Grant and extend previous work on magnetic suspension systems and devices in the Guidance and Control Branch and will permit the demonstration of several new developments in the field of magnetic suspension technology.

Distributed, cooperating knowledge-based systems

NASA Technical Reports Server (NTRS)

Truszkowski, Walt

1991-01-01

Some current research in the development and application of distributed, cooperating knowledge-based systems technology is addressed. The focus of the current research is the spacecraft ground operations environment. The underlying hypothesis is that, because of the increasing size, complexity, and cost of planned systems, conventional procedural approaches to the architecture of automated systems will give way to a more comprehensive knowledge-based approach. A hallmark of these future systems will be the integration of multiple knowledge-based agents which understand the operational goals of the system and cooperate with each other and the humans in the loop to attain the goals. The current work includes the development of a reference model for knowledge-base management, the development of a formal model of cooperating knowledge-based agents, the use of testbed for prototyping and evaluating various knowledge-based concepts, and beginning work on the establishment of an object-oriented model of an intelligent end-to-end (spacecraft to user) system. An introductory discussion of these activities is presented, the major concepts and principles being investigated are highlighted, and their potential use in other application domains is indicated.

Automated fiber placement: Evolution and current demonstrations

NASA Technical Reports Server (NTRS)

Grant, Carroll G.; Benson, Vernon M.

1993-01-01

The automated fiber placement process has been in development at Hercules since 1980. Fiber placement is being developed specifically for aircraft and other high performance structural applications. Several major milestones have been achieved during process development. These milestones are discussed in this paper. The automated fiber placement process is currently being demonstrated on the NASA ACT program. All demonstration projects to date have focused on fiber placement of transport aircraft fuselage structures. Hercules has worked closely with Boeing and Douglas on these demonstration projects. This paper gives a description of demonstration projects and results achieved.

UTM Weather Presentation

NASA Technical Reports Server (NTRS)

Chan, William N.; Kopardekar, Parimal H.; Carmichael, Bruce; Cornman, Larry

2017-01-01

Presentation highlighting how weather affected UAS operations during the UTM field tests. Research to develop UAS weather translation models with a description of current and future work for UTM weather.

Fatigue Risk Management: A Maritime Framework

PubMed Central

Grech, Michelle Rita

2016-01-01

It is evident that despite efforts directed at mitigating the risk of fatigue through the adoption of hours of work and rest regulations and development of codes and guidelines, fatigue still remains a concern in shipping. Lack of fatigue management has been identified as a contributory factor in a number of recent accidents. This is further substantiated through research reports with shortfalls highlighted in current fatigue management approaches. These approaches mainly focus on prescriptive hours of work and rest and include an individualistic approach to managing fatigue. The expectation is that seafarers are responsible to manage and tolerate fatigue as part of their working life at sea. This attitude is an accepted part of a seafarer’s role. Poor compliance is one manifest of this problem with shipboard demands making it hard for seafarers to follow hours of work and rest regulations, forcing them into this “poor compliance” trap. This makes current fatigue management approaches ineffective. This paper proposes a risk based approach and way forward for the implementation of a fatigue risk management framework for shipping, aiming to support the hours of work and rest requirements. This forms part of the work currently underway to review and update the International Maritime Organization, Guidelines on Fatigue. PMID:26840326

Fatigue Risk Management: A Maritime Framework.

PubMed

Grech, Michelle Rita

2016-01-29

It is evident that despite efforts directed at mitigating the risk of fatigue through the adoption of hours of work and rest regulations and development of codes and guidelines, fatigue still remains a concern in shipping. Lack of fatigue management has been identified as a contributory factor in a number of recent accidents. This is further substantiated through research reports with shortfalls highlighted in current fatigue management approaches. These approaches mainly focus on prescriptive hours of work and rest and include an individualistic approach to managing fatigue. The expectation is that seafarers are responsible to manage and tolerate fatigue as part of their working life at sea. This attitude is an accepted part of a seafarer's role. Poor compliance is one manifest of this problem with shipboard demands making it hard for seafarers to follow hours of work and rest regulations, forcing them into this "poor compliance" trap. This makes current fatigue management approaches ineffective. This paper proposes a risk based approach and way forward for the implementation of a fatigue risk management framework for shipping, aiming to support the hours of work and rest requirements. This forms part of the work currently underway to review and update the International Maritime Organization, Guidelines on Fatigue.

Counterfactual Thinking and False Belief: The Role of Executive Function

ERIC Educational Resources Information Center

Drayton, Stefane; Turley-Ames, Kandi J.; Guajardo, Nicole R.

2011-01-01

The purpose of the current study was to examine further the relationship between counterfactual thinking and false belief (FB) as examined by Guajardo and Turley-Ames ("Cognitive Development, 19" (2004) 53-80). More specifically, the current research examined the importance of working memory and inhibitory control in understanding the relationship…

A Qualitative Look at the Perceived Strengths of Male Batterers: Implications for Intervention Programs

ERIC Educational Resources Information Center

Aguirre, Regina T. P.; Lehmann, Peter; Patton, Joy D.

2011-01-01

Currently, batterer intervention programs tend to focus on education and confrontation, with outcomes being less than promising. Limitations of current interventions have encouraged development of alternative treatment forms aimed at ending relationship violence. An emerging trend in the fields of social work and positive psychology is to build on…

Commentaries on Research in Instructional Media. An Examination of Conceptual Schemes.

ERIC Educational Resources Information Center

Salomon, Gavriel, Ed.; Snow, Richard E., Ed.

1970-01-01

Papers which explore the aspects of current work in instructional technology and promote research and development in the field are collected in this bulletin. An introductory paper provides some general perceptives on the current state of instructional technology in relation to the contemporary educational scene and the various problems and…

Consuming Conventions: Sustainable Consumption, Ecological Citizenship and the Worlds of Worth

ERIC Educational Resources Information Center

Evans, David

2011-01-01

In light of the recognition that current patterns of consumption in the developed world are environmentally damaging, the question of sustainable consumption has become increasingly prominent in public and policy discourse. This paper joins an emerging body of work that critiques the behaviorist perspectives that currently dominate the field and…

The UAS control segment architecture: an overview

NASA Astrophysics Data System (ADS)

Gregory, Douglas A.; Batavia, Parag; Coats, Mark; Allport, Chris; Jennings, Ann; Ernst, Richard

2013-05-01

The Under Secretary of Defense (Acquisition, Technology and Logistics) directed the Services in 2009 to jointly develop and demonstrate a common architecture for command and control of Department of Defense (DoD) Unmanned Aircraft Systems (UAS) Groups 2 through 5. The UAS Control Segment (UCS) Architecture is an architecture framework for specifying and designing the softwareintensive capabilities of current and emerging UCS systems in the DoD inventory. The UCS Architecture is based on Service Oriented Architecture (SOA) principles that will be adopted by each of the Services as a common basis for acquiring, integrating, and extending the capabilities of the UAS Control Segment. The UAS Task Force established the UCS Working Group to develop and support the UCS Architecture. The Working Group currently has over three hundred members, and is open to qualified representatives from DoD-approved defense contractors, academia, and the Government. The UCS Architecture is currently at Release 2.2, with Release 3.0 planned for July 2013. This paper discusses the current and planned elements of the UCS Architecture, and related activities of the UCS Community of Interest.

Everyone's business: developing an integrated model of care to respond to child abuse in a pediatric hospital setting.

PubMed

Connolly, Sarah

2012-01-01

In pediatric hospitals, social work plays a central role in the prevention, identification, and management of child abuse. Children who are suspected of having been abused or neglected require an evaluation of their psychosocial situation. As an integral member of the health care team, the social worker is well placed to undertake comprehensive psychosocial assessments including information on the child's development, parental capacity, family, and community supports. Current practice approaches have seen a shift away from a narrow, "expert" approach to child protection. This article describes the development of an integrated model of social work service delivery to better respond to vulnerable and at-risk children in a pediatric hospital setting. Developing a new model of service required strategic planning, consultation, and endorsement from senior hospital management. The new model aimed to ensure a high quality, responsive social work service to children at risk of physical abuse, neglect, or cumulative harm. The change necessitated understanding of current research evidence, development of best practice guidelines, and effective communication with staff and external stakeholders. Policy development, implementation of practice guidelines, staff training, data collection, and service evaluation are described. The role of social work management and leadership were central in creating change. Visionary leadership is widely regarded as key to successful organizational change. The management approach included consultation with staff, building commitment to the need for change, addressing staff concerns, and providing a vision of enhanced client outcomes as a result of the change process. This article provides a candid overview of challenges and barriers to change. Change strategies described are easily transferable to other social work settings. Copyright © Taylor & Francis Group, LLC

Development of Water Quality Modeling in the United States

EPA Science Inventory

This presentation describes historical trends in water quality model development in the United States, reviews current efforts, and projects promising future directions. Water quality modeling has a relatively long history in the United States. While its origins lie in the work...

Cultivation of personality awareness - The starting point of thinking and politics in colleges and universities in the current network information

NASA Astrophysics Data System (ADS)

Shen, Jie

2018-03-01

With the continuous development of network technology, the development of network information age has promoted the orderly development of ideological and political education in colleges and universities. It can effectively improve students' political accomplishments and continuously broaden the ways of thinking and education in colleges and universities. Ideological and political work to provide more information platform and education. This article will elaborate on the cultivation of personality consciousness in college ideological and political work under the network age and put forward corresponding measures.

NASTRAN interfacing modules within the Integrated Analysis Capability (IAC) Program

NASA Technical Reports Server (NTRS)

Frisch, H. P.

1986-01-01

The IAC program provides the framework required for the development of an extensive multidisciplinary analysis capability. Several NASTRAN related capabilities were developed which can all be expanded in a routine manner to meet in-house unique needs. Plans are to complete the work discussed herein and to provide it to the engineering community through COSMIC. Release is to be after the current IAC Level 2 contract work on the IAC executive system is completed and meshed with the interfacing modules and analysis capabilities under development at the GSFC.

Work-Related Injury Surveillance in Vietnam: A National Reporting System Model

PubMed Central

Marucci-Wellman, Helen; Wegman, David H.; Leamon, Tom B.; Tuyet Binh, Ta Thi; Diep, Nguyen Bich; Kriebel, David

2013-01-01

Developing nations bear a substantial portion of the global burden of injury. Public health surveillance models in developing countries should recognize injury risks for all levels of society and all causes and should incorporate various groups of workers and industries, including subsistence agriculture. However, many developing nations do not have an injury registration system; current data collection methods result in gross national undercounts of injuries, failing to distinguish injuries that occur during work. In 2006, we established an active surveillance system in Vietnam’s Xuan Tien commune and investigated potential methods for surveillance of work-related injuries. On the basis of our findings, we recommend a national model for work-related injury surveillance in Vietnam that builds on the existing health surveillance system. PMID:24028255

Development of electromagnetic welding facility of flat plates for nuclear industry

NASA Astrophysics Data System (ADS)

Kumar, Rajesh; Sahoo, Subhanarayan; Sarkar, Biswanath; Shyam, Anurag

2017-04-01

Electromagnetic pulse welding (EMPW) process, one of high speed welding process uses electromagnetic force from discharged current through working coil, which develops a repulsive force between the induced current flowing parallel and in opposite direction. For achieving the successful weldment using this process the design of working coil is the most important factor due to high magnetic field on surface of work piece. In case of high quality flat plate welding factors such as impact velocity, angle of impact standoff distance, thickness of flyer and overlap length have to be chosen carefully. EMPW has wide applications in nuclear industry, automotive industry, aerospace, electrical industries. However formability and weldability still remain major issues. Due to ease in controlling the magnetic field enveloped inside tubes, the EMPW has been widely used for tube welding. In case of flat components control of magnetic field is difficult. Hence the application of EMPW gets restricted. The present work attempts to make a novel contribution by investigating the effect of process parameters on welding quality of flat plates. The work emphasizes the approaches and engineering calculations required to effectively use of actuator in EMPW of flat components.

Methods for Estimating Environmental Effects and Constraints on NexGen: High Density Case Study

NASA Technical Reports Server (NTRS)

Augustine, S.; Ermatinger, C.; Graham, M.; Thompson, T.

2010-01-01

This document provides a summary of the current methods developed by Metron Aviation for the estimate of environmental effects and constraints on the Next Generation Air Transportation System (NextGen). This body of work incorporates many of the key elements necessary to achieve such an estimate. Each section contains the background and motivation for the technical elements of the work, a description of the methods used, and possible next steps. The current methods described in this document were selected in an attempt to provide a good balance between accuracy and fairly rapid turn around times to best advance Joint Planning and Development Office (JPDO) System Modeling and Analysis Division (SMAD) objectives while also supporting the needs of the JPDO Environmental Working Group (EWG). In particular this document describes methods applied to support the High Density (HD) Case Study performed during the spring of 2008. A reference day (in 2006) is modeled to describe current system capabilities while the future demand is applied to multiple alternatives to analyze system performance. The major variables in the alternatives are operational/procedural capabilities for airport, terminal, and en route airspace along with projected improvements to airframe, engine and navigational equipment.

Review of Manganese Processing for Production of TRIP/TWIP Steels, Part 1: Current Practice and Processing Fundamentals

NASA Astrophysics Data System (ADS)

Elliott, R.; Coley, K.; Mostaghel, S.; Barati, M.

2018-02-01

The increasing demand for high-performance steel alloys has led to development of transformation-induced plasticity (TRIP) and twinning-induced plasticity (TWIP) alloys over the past three decades. These alloys offer exceptional combinations of high tensile strength and ductility. Thus, the mechanical behavior of these alloys has been a subject of significant work in recent years. However, the challenge of economically providing Mn in the quantity and purity required by these alloys has received considerably less attention. To enable commercial implementation of ultrahigh-Mn alloys, it is desirable to lower the high material costs associated with their production. Therefore, the present work reviews Mn processing routes in the context of the chemical requirements of these alloys. The aim of this review is to assess the current state of the art regarding reduction of manganese ores and provide a comprehensive reference for researchers working to mitigate material processing costs associated with Mn production. The review is presented in two parts: Part 1 introduces TRIP and TWIP alloys, current industrial practice, and pertinent thermodynamic fundamentals; Part 2 addresses available literature regarding reduction of Mn ores and oxides, and seeks to identify opportunities for future process development.

Work and retirement preferences of practicing radiologists as a predictor of workforce needs.

PubMed

Moriarity, Andrew K; Brown, Manuel L; Schultz, Lonni R

2014-08-01

The radiology job market has been described as highly variable, and recent practice hiring surveys predict that the number of available jobs will remain flat. Radiologists may be working more hours and retiring later than desired, activities that influence overall job availability. A national survey was performed to determine the desired work rate and retirement preferences of practicing radiologists, and the responses are used to estimate current and potential future work output and future workforce needs. Practicing radiologists were surveyed regarding current and preferred work level and desired and expected retirement age. A model incorporating these preferences and stratified by age was developed using survey responses and American Medical Association full-time equivalent (FTE) estimates. Available FTE radiologists are estimated under four scenarios from 2016 to 2031 in 5-year intervals. The model predicts a total of 26,362 FTE radiologists available in 2011, which corresponds to previous estimates. Participants reported working more hours and expecting to retire later than desired, with younger radiologists and women reporting the greatest desired decrease in FTE hours worked. Under each scenario, there is an initial FTE availability in 2016 ranging from 21,156 to 24,537, which increases to between 27,753 and 31,435 FTE by 2031 depending on work rate and retirement patterns. Practicing radiologists report that they currently work more hours than desired and expect to retire later than they would prefer. If radiologists changed current personal work rate and expected retirement age to meet these preferences, there would be an immediate shortage of FTE radiologists continuing until at least 2020 assuming no other workforce needs changes. Copyright © 2014 AUR. Published by Elsevier Inc. All rights reserved.

A Sequential Analysis of Parent-Child Interactions in Anxious and Nonanxious Families

ERIC Educational Resources Information Center

Williams, Sarah R.; Kertz, Sarah J.; Schrock, Matthew D.; Woodruff-Borden, Janet

2012-01-01

Although theoretical work has suggested that reciprocal behavior patterns between parent and child may be important in the development of childhood anxiety, most empirical work has failed to consider the bidirectional nature of interactions. The current study sought to address this limitation by utilizing a sequential approach to exploring…

Social Work Literature Searching: Current Issues with Databases and Online Search Engines

ERIC Educational Resources Information Center

McGinn, Tony; Taylor, Brian; McColgan, Mary; McQuilkan, Janice

2016-01-01

Objectives: To compare the performance of a range of search facilities; and to illustrate the execution of a comprehensive literature search for qualitative evidence in social work. Context: Developments in literature search methods and comparisons of search facilities help facilitate access to the best available evidence for social workers.…

Moving through Moodle: Using E-Technology to Enhance Social Work Field Education

ERIC Educational Resources Information Center

Hay, Kathryn; Dale, Michael

2014-01-01

At Massey University, New Zealand, the Moodle program was introduced as an institutional innovation to support and enhance teaching and learning. Within the social work field education program Moodle has been embraced as an opportunity to creatively advance current educational practices. The development of a meta-site for field education enables…

Working Memory Deficits and Social Problems in Children with ADHD

ERIC Educational Resources Information Center

Kofler, Michael J.; Rapport, Mark D.; Bolden, Jennifer; Sarver, Dustin E.; Raiker, Joseph S.; Alderson, R. Matt

2011-01-01

Social problems are a prevalent feature of ADHD and reflect a major source of functional impairment for these children. The current study examined the impact of working memory deficits on parent- and teacher-reported social problems in a sample of children with ADHD and typically developing boys (N = 39). Bootstrapped, bias-corrected mediation…

Planning the Journey to Best Practice in Developing Employability Skills: Transnational University Internships in Vietnam

ERIC Educational Resources Information Center

Bilsland, Christine; Nagy, Helga; Smith, Phil

2014-01-01

Currently, there is little research into how Western universities can establish and implement effective WIL (Work Integrated Learning) in their offshore campuses. Given global concern with university graduates' general work-readiness, combined with a need for foreign universities to deliver relevant outcomes to its offshore students, greater…

Meeting the customer's needs for mobility and safety during construction and maintenance operations : model work zone traffic management program and self evaluation guide

DOT National Transportation Integrated Search

1998-09-01

This model program was developed by combining traffic management concepts reported in research studies and papers with the effective techniques currently being used by States to minimize motorist delays and enhance work zone safety. This model is pre...

How to Promote Innovative Behavior at Work? The Role of Justice and Support within Organizations

ERIC Educational Resources Information Center

Young, Linn D.

2012-01-01

To provide a more developed research model of innovation in organizations, we reconsidered current thinking about the effects of organizational justice on innovative behavior at work. We investigated the mediating role of perceived organizational support (POS) between the two constructs. As hypothesized, empirical results showed that justice…

Engaging with Employers in Work-Based Learning: A Foundation Degree in Applied Technology

ERIC Educational Resources Information Center

Benefer, Richard

2007-01-01

Purpose: This paper aims to describe the work of Staffordshire University in engaging with local employers and local further education colleges in the development of a Foundation Degree in Applied Technology. Design/methodology/approach: Following an outline of current government policy in employer engagement, the paper identifies--from the…

Calvin Brainerd Cady: Thought and Feeling in the Study of Music.

ERIC Educational Resources Information Center

Shiraishi, Fumiko

1999-01-01

Presents the life and work of Calvin Brainerd Cady, an influential U.S. music educator who developed a theory of music education that emphasized the unification of children's thoughts and feelings. Discusses Cady's educational practices in depth and how his work remains relevant to current music-education practices. (DSK)

Designing and Developing a Work Experience Component for a Vocational Education Curriculum.

ERIC Educational Resources Information Center

Santos, Otto, Jr.; Olinzock, Anthony

A work experience component for vocational educator teacher education based on demonstrated competence is proposed. Its basis is research concerning vocational education; sociometric conditions and needs; analyses of the past, present, and future of vocational education; and the current state of the art relative to curriculum systems. This…

ANNETTE Project: Contributing to The Nuclearization of Fusion

NASA Astrophysics Data System (ADS)

Ambrosini, W.; Cizelj, L.; Dieguez Porras, P.; Jaspers, R.; Noterdaeme, J.; Scheffer, M.; Schoenfelder, C.

2018-01-01

The ANNETTE Project (Advanced Networking for Nuclear Education and Training and Transfer of Expertise) is well underway, and one of its work packages addresses the design, development and implementation of nuclear fusion training. A systematic approach is used that leads to the development of new training courses, based on identified nuclear competences needs of the work force of (future) fusion reactors and on the current availability of suitable training courses. From interaction with stakeholders involved in the ITER design and construction or the JET D-T campaign, it became clear that the lack of nuclear safety culture awareness already has an impact on current projects. Through the collaboration between the European education networks in fission (ENEN) and fusion (FuseNet) in the ANNETTE project, this project is well positioned to support the development of nuclear competences for ongoing and future fusion projects. Thereby it will make a clear contribution to the realization of fusion energy.

Simulated Surgery-an exam for our time? Summary of the current status and development of the MRCGP Simulated Surgery module.

PubMed

Hawthorne, Kamila; Denney, Mei Ling; Bewick, Mike; Wakeford, Richard

2006-01-01

WHAT IS ALREADY KNOWN IN THIS AREA • The Simulated Surgery module of the MRCGP examination has been shown to be a valid and reliable assessment of clinical consulting skills. WHAT THIS WORK ADDS • This paper describes the further development of the methodology of the Simulated Surgery; showing the type of data analysis currently used to assure its quality and reliability. The measures taken to tighten up case quality are discussed. SUGGESTIONS FOR FUTURE RESEARCH The future development of clinical skills assessments in general practice is discussed. More work is needed on the effectiveness and reliability of lay assessors in complex integrated clinical cases. New methods to test areas that are difficult to reproduces in a simulated environment (such as acute emergencies and cases with the very young or very old) are also needed.

Air Force Phillips Laboratory Battery Program overview

NASA Technical Reports Server (NTRS)

House, Shaun

1992-01-01

Battery development and testing efforts at Phillips Laboratory fall into three main categories: nickel hydrogen, sodium sulfur, and solid state batteries. Nickel hydrogen work is broken down into a Low Earth Orbit (LEO) Life Test Program, a LEO Pulse Test Program, and a Hydrogen Embrittlement Investigation. Sodium sulfur work is broken down into a Geosynchronous Earth Orbit (GEO) Battery Flight Test and a Hot Launch Evaluation. Solid state polymer battery work consists of a GEO Battery Development Program, a Pulse Power Battery Small Business Innovation Research (SBIR), and an in-house evaluation of current generation laboratory cells. An overview of the program is presented.

Developing a Model of Advanced Training to Promote Career Advancement for Certified Genetic Counselors: An Investigation of Expanded Skills, Advanced Training Paths, and Professional Opportunities.

PubMed

Baty, Bonnie J; Trepanier, Angela; Bennett, Robin L; Davis, Claire; Erby, Lori; Hippman, Catriona; Lerner, Barbara; Matthews, Anne; Myers, Melanie F; Robbins, Carol B; Singletary, Claire N

2016-08-01

There are currently multiple paths through which genetic counselors can acquire advanced knowledge and skills. However, outside of continuing education opportunities, there are few formal training programs designed specifically for the advanced training of genetic counselors. In the genetic counseling profession, there is currently considerable debate about the paths that should be available to attain advanced skills, as well as the skills that might be needed for practice in the future. The Association of Genetic Counseling Program Directors (AGCPD) convened a national committee, the Committee on Advanced Training for Certified Genetic Counselors (CATCGC), to investigate varied paths to post-master's training and career development. The committee began its work by developing three related grids that view career advancement from the viewpoints of the skills needed to advance (skills), ways to obtain these skills (paths), and existing genetic counselor positions that offer career change or advancement (positions). Here we describe previous work related to genetic counselor career advancement, the charge of the CATCGC, our preliminary work in developing a model through which to view genetic counselor advanced training and career advancement opportunities, and our next steps in further developing and disseminating the model.

On your marks, get set, go!-lessons from the UK in enhancing employability of graduates and postgraduates.

PubMed

Fahnert, Beatrix

2015-10-01

Employers expect graduates and postgraduates to demonstrate their education through more than good grades. Learning activities that develop subject skills during formalized programmes of undergraduate and postgraduate study also develop employability skills, if the curriculum is suitably aligned, and developmental planning is supported. Only little extra provision is required, but all development needs to be explicitly signposted to the learner, and the curriculum should be developed in consultation with employers. This review aims to raise awareness of current issues in the context of enhancing employability that arise from an increased global competition on the job market and the expectation of the Higher Education sector to produce work-ready graduates and postgraduates that are well equipped to adapt to a quickly changing work environment particularly due to transferable skills. In the context of lessons from the UK, these current issues and employability are discussed, and approaches to Personal Development Planning that prepare students for lifelong learning and that enable communicating and evidencing achievement are addressed. Issues specific to postgraduates, how actual work experience should be maximized as well as other career influences such as learned societies and social networking are highlighted. © FEMS 2015. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Integrated Graphics Operations and Analysis Lab Development of Advanced Computer Graphics Algorithms

NASA Technical Reports Server (NTRS)

Wheaton, Ira M.

2011-01-01

The focus of this project is to aid the IGOAL in researching and implementing algorithms for advanced computer graphics. First, this project focused on porting the current International Space Station (ISS) Xbox experience to the web. Previously, the ISS interior fly-around education and outreach experience only ran on an Xbox 360. One of the desires was to take this experience and make it into something that can be put on NASA s educational site for anyone to be able to access. The current code works in the Unity game engine which does have cross platform capability but is not 100% compatible. The tasks for an intern to complete this portion consisted of gaining familiarity with Unity and the current ISS Xbox code, porting the Xbox code to the web as is, and modifying the code to work well as a web application. In addition, a procedurally generated cloud algorithm will be developed. Currently, the clouds used in AGEA animations and the Xbox experiences are a texture map. The desire is to create a procedurally generated cloud algorithm to provide dynamically generated clouds for both AGEA animations and the Xbox experiences. This task consists of gaining familiarity with AGEA and the plug-in interface, developing the algorithm, creating an AGEA plug-in to implement the algorithm inside AGEA, and creating a Unity script to implement the algorithm for the Xbox. This portion of the project was unable to be completed in the time frame of the internship; however, the IGOAL will continue to work on it in the future.

Is precarious employment more damaging to women's health than men's?

PubMed

Menéndez, María; Benach, Joan; Muntaner, Carles; Amable, Marcelo; O'Campo, Patricia

2007-02-01

Current global economic trends in both developed and developing countries, including unregulated labor markets, trade competition and technological change, have greatly expanded a complex labor market situation characterised by many employees working under temporary work status, job insecurity, low social protection and low income level. Although the health of women is disproportionately affected by workplace flexibility, this has been largely ignored. The main purpose of this paper is to draw attention to this relevant but neglected topic.

Hot-spot heating susceptibility due to reverse bias operating conditions

NASA Technical Reports Server (NTRS)

Gonzalez, C. C.

1985-01-01

Because of field experience (indicating that cell and module degradation could occur as a result of hot spot heating), a laboratory test was developed at JPL to determine hot spot susceptibility of modules. The initial hot spot testing work at JPL formed a foundation for the test development. Test parameters are selected as follows. For high shunt resistance cells, the applied back bias test current is set equal to the test cell current at maximum power. For low shunt resistance cells, the test current is set equal to the cell short circuit current. The shadow level is selected to conform to that which would lead to maximum back bias voltage under the appropriate test current level. The test voltage is determined by the bypass diode frequency. The test conditions are meant to simulate the thermal boundary conditions for 100 mW/sq cm, 40C ambient environment. The test lasts 100 hours. A key assumption made during the development of the test is that no current imbalance results from the connecting of multiparallel cell strings. Therefore, the test as originally developed was applicable for single string case only.

Development of Participative Management System in Learning Environment Management for Small Sized Primary Schools

ERIC Educational Resources Information Center

Hernthaisong, Prasertsak; Sirisuthi, Chaiyuth; Wisetrinthong, Kanjana

2017-01-01

The research aimed to: 1) study the factors of a participative management system in learning environment management, 2) study the current situation, desirable outcomes, and further needs for developing a participative management system in learning management, 3) develop a working participative management system, and 4) assess the system's…

Special Education: A Reference Book for Policy & Curriculum Development. Second Edition

ERIC Educational Resources Information Center

Grey House Publishing, 2009

2009-01-01

A reference work that presents a chronology focusing on special education, its development, and the important issues that both positively and negatively affect the field. Updated through current events, this second edition provides an excellent introduction to special education in all of its practical aspects--how it developed, its curriculum,…

Career Development Programs in the Workplace. Information Series No. 333.

ERIC Educational Resources Information Center

Slavenski, Lynn; Buckner, Marilyn

A number of factors drive the current trend toward career development in the workplace. They include the need to predict personnel needs, social and demographic trends, changing nature of work, changing types of jobs, equity, productivity, technological change, and organizational philosophies. Career development is important at every step in the…

Design/Analysis of the JWST ISIM Bonded Joints for Survivability at Cryogenic Temperatures

NASA Technical Reports Server (NTRS)

Bartoszyk, Andrew; Johnston, John; Kaprielian, Charles; Kuhn, Jonathan; Kunt, Cengiz; Rodini,Benjamin; Young, Daniel

1990-01-01

A major design and analysis challenge for the JWST ISIM structure is thermal survivability of metal/composite bonded joints below the cryogenic temperature of 30K (-405 F). Current bonded joint concepts include internal invar plug fittings, external saddle titanium/invar fittings and composite gusset/clip joints all bonded to M55J/954-6 and T300/954-6 hybrid composite tubes (75mm square). Analytical experience and design work done on metal/composite bonded joints at temperatures below that of liquid nitrogen are limited and important analysis tools, material properties, and failure criteria for composites at cryogenic temperatures are sparse in the literature. Increasing this challenge is the difficulty in testing for these required tools and properties at cryogenic temperatures. To gain confidence in analyzing and designing the ISIM joints, a comprehensive joint development test program has been planned and is currently running. The test program is designed to produce required analytical tools and develop a composite failure criterion for bonded joint strengths at cryogenic temperatures. Finite element analysis is used to design simple test coupons that simulate anticipated stress states in the flight joints; subsequently the test results are used to correlate the analysis technique for the final design of the bonded joints. In this work, we present an overview of the analysis and test methodology, current results, and working joint designs based on developed techniques and properties.

Improved work zone design guidelines and enhanced model of travel delays in work zones : Phase I, portability and scalability of interarrival and service time probability distribution functions for different locations in Ohio and the establishment of impr

DOT National Transportation Integrated Search

2006-01-01

The project focuses on two major issues - the improvement of current work zone design practices and an analysis of : vehicle interarrival time (IAT) and speed distributions for the development of a digital computer simulation model for : queues and t...

Supporting newly qualified dental therapists into practice: a longitudinal evaluation of a foundation training scheme for dental therapists (TFT).

PubMed

Bullock, A D; Barnes, E; Falcon, H C; Stearns, K

2013-04-01

Focused on the dental therapists foundation training (TFT) scheme run by the Postgraduate Dental Deaneries of Oxford and Wessex (NHS Education South Central - NESC) the objectives were (1) to evaluate the TFT 2010/11 scheme, identifying strengths, areas for development and drawing comparisons with the 2009 evaluation; and (2) to follow-up previous cohorts, reporting current work and retrospective reflections on the scheme. Data were collected from 2010/11 ('current') trainees (n = 10) through group discussion, questionnaire and portfolio extracts. Eleven past-trainees from 2008/09 and 2009/10 took part in a structured telephone interview or responded to questions via e-mail. Data from 2011 consolidated that collected earlier. The scheme was highly valued. Current participants thought the scheme should be mandatory and all past-participants would recommend it to others. Trainees attributed an increase in confidence and ability in their clinical skills to participation in TFT. Current trainees' concerns about finding therapy work were echoed in past-participants' post-scheme employment. At the point of qualification, trainees do not feel well-prepared for starting work as dental therapists. Opportunity to develop confidence and skills in a supportive environment is a key benefit of the scheme. Maintaining ability in the full range of duties requires continued use of skills and the opportunity to do this remains an ongoing challenge.

Breadth of Scientific Activities and Network Station Specifications in the International GPS Service (IGS)

NASA Technical Reports Server (NTRS)

Moore, A. W.; Neilan, R. E.; Springer, T. A.; Reigber, Ch.

2000-01-01

A strong multipurpose aspect of the International GPS Service (IGS) is revealed by a glance at the titles of current projects and working groups within the IGS: IGS/BIPM Time Transfer Project; Ionosphere Working Group; Troposphere Working Group; International GLONASS Experiment; Working Group on Low-Earth Orbiter Missions; and Tide Gauges, CGPS, and the IGS. The IGS network infrastructure, in large part originally commissioned for geodynamical investigations, has proved to be a valuable asset in developing application-oriented subnetworks whose requirements overlap the characteristics of existing IGS stations and future station upgrades. Issues encountered thus far in the development of multipurpose or multitechnique IGS projects as well as future possibilities will be reviewed.

Locomotive cab design development. Volume 1 : analysis of locomotive cab environment & development of cab design alternatives

DOT National Transportation Integrated Search

1976-10-01

This report presents an analysis of the line haul freight : engineer's working and living environment, the resultant locomotive : cab design and design alternatives. The analysis is based on a : delineation of functional requirements found in current...

Development of a Tele-Micro-Robot for Telemanipulation of a Microscopic Environment

NASA Technical Reports Server (NTRS)

Goldfarb, Michael

1998-01-01

The objective of the proposed work was to design and develop the mechanical equivalent of a stereomicroscope in order to eliminate the mismatch that currently exists between one's ability to observe a microscopic environment and one's ability to manipulate it.

Understanding and Developing Black Popular Music Collections.

ERIC Educational Resources Information Center

Murray, James Briggs

1983-01-01

Enumerates types of black popular music (work songs, spirituals, gospel music, blues, race records, rock and roll, soul, funk, disco, Caribbean, and African) and discusses collection development (current, retrospective, monographs, periodicals, sheet music, motion picture film, photographs, oral history), cataloging, and preservation. A 229-item…

System for Anomaly and Failure Detection (SAFD) system development

NASA Technical Reports Server (NTRS)

Oreilly, D.

1992-01-01

This task specified developing the hardware and software necessary to implement the System for Anomaly and Failure Detection (SAFD) algorithm, developed under Technology Test Bed (TTB) Task 21, on the TTB engine stand. This effort involved building two units; one unit to be installed in the Block II Space Shuttle Main Engine (SSME) Hardware Simulation Lab (HSL) at Marshall Space Flight Center (MSFC), and one unit to be installed at the TTB engine stand. Rocketdyne personnel from the HSL performed the task. The SAFD algorithm was developed as an improvement over the current redline system used in the Space Shuttle Main Engine Controller (SSMEC). Simulation tests and execution against previous hot fire tests demonstrated that the SAFD algorithm can detect engine failure as much as tens of seconds before the redline system recognized the failure. Although the current algorithm only operates during steady state conditions (engine not throttling), work is underway to expand the algorithm to work during transient condition.

Influence of backup bearings and support structure dynamics on the behavior of rotors with active supports

NASA Technical Reports Server (NTRS)

Flowers, George T.

1994-01-01

Progress over the past year includes the following: A simplified rotor model with a flexible shaft and backup bearings has been developed. A simple rotor model which includes a flexible disk and bearings with clearance has been developed and the dynamics of the model investigated. A rotor model based upon the T-501 engine has been developed which includes backup bearing effects. Parallel simulation runs are being conducted using an ANSYS based finite element model of the T-501. The magnetic bearing test rig is currently floating and dynamics/control tests are being conducted. A paper has been written that documents the work using the T-501 engine model. Work has continued with the simplified model. The finite element model is currently being modified to include the effects of foundation dynamics. A literature search for material on foil bearings has been conducted. A finite element model is being developed for a magnetic bearing in series with a foil backup bearing.

[Workflow involving preventive health care promotes the economic development of a company].

PubMed

Braun, M

2003-12-01

Today's working society obviously develops from industrial production to knowledge-intensive service. In service-oriented working conditions, the importance of the human being as a main performer of economic success increases. Thus, the development leads to a changing spectrum of occupational health risks. Together with socio-demographic developments, individual strain-oriented health disorders connected to one's occupation might endanger an enterprise's capacity of performance and innovation as well as its sustainable enterprise development. Only healthy, motivated and qualified employees are able and ready to keep their creative and customer-oriented potential harnessed and thereby work to the best of their ability. Consequently, occupational health gains a more important role within the enterprise. Although in many enterprises the benefit contribution of preventive work design has not yet been considered that relevant, enterprises have realised that a preventive health-oriented work design might help to better manage current business challenges. An up-to-date definition of health includes the goals of health improvement, personality development as well as a comprehensive well-being. Health is a prerequisite and result of a productive reflection upon the conditions and challenges of work. Business practice shows that a preventive work design should involve an economic benefit for the enterprise. If occupational health is seen as a characteristic of quality and a prerequisite for sustainable enterprise development, economic potentials of preventive work designs will expand considerably.

Advances toward industrialization of novel molten salt electrochemical processes.

PubMed

Ito, Yasuhiko; Nishikiori, Tokujiro; Tsujimura, Hiroyuki

2016-08-15

We have invented various novel molten salt electrochemical processes, that can be put to practical use in the fields of energy and materials. These processes are promising from both technological and commercial viewpoints, and they are currently under development for industrial application. To showcase current developments in work toward industrialization, we focus here on three of these processes: (1) electrolytic synthesis of ammonia from water and nitrogen under atmospheric pressure, (2) electrochemical formation of carbon film, and (3) plasma-induced discharge electrolysis to produce nanoparticles.

NASA Applications of Structural Health Monitoring Technology

NASA Technical Reports Server (NTRS)

Richards, W Lance; Madaras, Eric I.; Prosser, William H.; Studor, George

2013-01-01

This presentation provides examples of research and development that has recently or is currently being conducted at NASA, with a special emphasis on the application of structural health monitoring (SHM) of aerospace vehicles. SHM applications on several vehicle programs are highlighted, including Space Shuttle Orbiter, International Space Station, Uninhabited Aerial Vehicles, and Expandable Launch Vehicles. Examples of current and previous work are presented in the following categories: acoustic emission impact detection, multi-parameter fiber optic strain-based sensing, wireless sensor system development, and distributed leak detection.

NASA Applications of Structural Health Monitoring Technology

NASA Technical Reports Server (NTRS)

Richards, W Lance; Madaras, Eric I.; Prosser, William H.; Studor, George

2013-01-01

This presentation provides examples of research and development that has recently or is currently being conducted at NASA, with a special emphasis on the application of structural health monitoring (SHM) of aerospace vehicles. SHM applications on several vehicle programs are highlighted, including Space Shuttle Orbiter, the International Space Station, Uninhabited Aerial Vehicles, and Expendable Launch Vehicles. Examples of current and previous work are presented in the following categories: acoustic emission impact detection, multi-parameter fiber optic strain-based sensing, wireless sensor system development, and distributed leak detection.

Animal manure digestion systems in central Europe

DOE Office of Scientific and Technical Information (OSTI.GOV)

Koeberle, E.

1996-01-01

This work provides an overview of existing plants in Europe and describes the substrates being used. It focuses on the individual farm-scale and community plants, as these are the two main types now being built. It also describes plants currently under construction, especially in Germany and Denmark, where the major efforts are focused. A description of how the technique has developed over the past few years, its current state of development, the motivation and economic balance, and the substrate characteristics, is presented.

The Serpent Monte Carlo Code: Status, Development and Applications in 2013

NASA Astrophysics Data System (ADS)

Leppänen, Jaakko; Pusa, Maria; Viitanen, Tuomas; Valtavirta, Ville; Kaltiaisenaho, Toni

2014-06-01

The Serpent Monte Carlo reactor physics burnup calculation code has been developed at VTT Technical Research Centre of Finland since 2004, and is currently used in 100 universities and research organizations around the world. This paper presents the brief history of the project, together with the currently available methods and capabilities and plans for future work. Typical user applications are introduced in the form of a summary review on Serpent-related publications over the past few years.

Ga:Ge array development

NASA Technical Reports Server (NTRS)

Young, Erick T.; Rieke, G. H.; Low, Frank J.; Haller, E. E.; Beeman, J. W.

1989-01-01

Work at the University of Arizona and at Lawrence Berkeley Laboratory on the development of a far infrared array camera for the Multiband Imaging Photometer on the Space Infrared Telescope Facility (SIRTF) is discussed. The camera design uses stacked linear arrays of Ge:Ga photoconductors to make a full two-dimensional array. Initial results from a 1 x 16 array using a thermally isolated J-FET readout are presented. Dark currents below 300 electrons s(exp -1) and readout noises of 60 electrons were attained. Operation of these types of detectors in an ionizing radiation environment are discussed. Results of radiation testing using both low energy gamma rays and protons are given. Work on advanced C-MOS cascode readouts that promise lower temperature operation and higher levels of performance than the current J-FET based devices is described.

Application of Magnetic Suspension and Balance Systems to Ultra-High Reynolds Number Facilities

NASA Technical Reports Server (NTRS)

Britcher, Colin P.

1996-01-01

The current status of wind tunnel magnetic suspension and balance system development is briefly reviewed. Technical work currently underway at NASA Langley Research Center is detailed, where it relates to the ultra-high Reynolds number application. The application itself is addressed, concluded to be quite feasible, and broad design recommendations given.

Home-Made Money: Consumer's Guide to Home Equity Conversion.

ERIC Educational Resources Information Center

Scholen, Ken

This guide was written to introduce consumers to home equity conversion (HEC) plans that are currently available and to explain the current state of HEC developments. It describes how the basic types of HEC plans work, gives examples of how how they can be used, discusses their advantages and disadvantages, and tells where they are available.…

The Next Chapter: Supporting Literacy within ESEA

ERIC Educational Resources Information Center

Haynes, Mariana

2015-01-01

Noting that 60 percent of both fourth and eighth graders currently struggle with reading, this report urges the U.S. Congress to focus on students' literacy development from early childhood through grade twelve as it works to rewrite of the Elementary and Secondary Education Act (ESEA), currently known as the No Child Left Behind Act (NCLB). In…

Building Bridges: Seeking Structure and Direction for Higher Education Motivated Learning Strategy Models

ERIC Educational Resources Information Center

Fryer, Luke K.

2017-01-01

Many of our current higher education (HE) learning strategy models intersect at important points. At the same time, these theories also often demonstrate important unique perspectives on student learning within HE. Currently, research with one learning strategy model rarely leads to developments in others, as each group of researchers works in…

A History of Art Education: Intellectual and Social Currents in Teaching the Visual Arts.

ERIC Educational Resources Information Center

Efland, Arthur D.

This book examines the historic developments of art education in the context of general educational trends and currents of social forces. The work is divided into 8 chapters. Chapter 1, "Art Education: Its Social Context", sets the philosophic basis for the book. Chapter 2, "Western Origins of Art Education", surveys…

The TF1 Radio Astronomy Working Group in the Andean ROAD: goals and challenges for 2025

NASA Astrophysics Data System (ADS)

Chaparro Molano, G.

2017-07-01

Since the creation of the Andean Regional Office of Astronomy for Development (OAD) of the International Astronomical Union, one of the main goals has been to foster a scientific culture of radio astronomy in countries of the central and northern Andes (Bolivia, Colombia, Ecuador, Perú, and Venezuela). For this reason, Andean ROAD Task Force 1 (Research and Education in Universities) created the Radio Astronomy Working Group to set a path along which collaborative endeavors can grow and yield scientific results. The first official meeting of the Working Group took place in Bogotá, Colombia during the 2nd Astronomá en los Andes Workshop (2015) where scientists actively developing projects in radio astronomy set goals for the near future, such as improving mobility for researchers and students, developing collaborations in related areas such as engineering and data science, and building transnational collaborations aiming at developing VLBI across the countries of the Andean ROAD and beyond. In this poster, I present current projects and associated research groups (ROAS - Perú, SiAMo - Colombia, Alfa-Orion UTP - Colombia, RAIG - Chile) and discuss goalposts and current challenges in the development of transnational radioastronomical projects. As a case study, I present the development and early astronomical results of the privately funded UECCI 4m Radio Telescope for 21 cm line observations in Bogotá, Colombia.

Monolithic Cu-Cr-Nb Alloys for High Temperature, High Heat Flux Applications

NASA Technical Reports Server (NTRS)

Ellis, David L.; Locci, Ivan E.; Michal, Gary M.; Humphrey, Derek M.

1999-01-01

Work during the prior four years of this grant has resulted in significant advances in the development of Cu-8 Cr4 Nb and related Cu-Cr-Nb alloys. The alloys are nearing commercial use in the Reusable Launch Vehicle (RLV) where they are candidate materials for the thrust cell liners of the aerospike engines being developed by Rocketdyne. During the fifth and final year of the grant, it is proposed to complete development of the design level database of mechanical and thermophysical properties and transfer it to NASA Glenn Research Center and Rocketdyne. The database development work will be divided into three main areas: Thermophysical Database Augmentation, Mechanical Testing and Metallography and Fractography. In addition to the database development, work will continue that is focussed on the production of alternatives to the powder metallurgy alloys currently used. Exploration of alternative alloys will be aimed at both the development of lower cost materials and higher performance materials. A key element of this effort will be the use of Thermo-Calc software to survey the solubility behavior of a wide range of alloying elements in a copper matrix. The ultimate goals would be to define suitable alloy compositions and processing routes to produce thin sheets of the material at either a lower cost, or, with improved mechanical and thermal properties compared to the current Cu-Cr-Nb powder metallurgy alloys.

Development and initial validation of a cognitive-based work-nonwork conflict scale.

PubMed

Ezzedeen, Souha R; Swiercz, Paul M

2007-06-01

Current research related to work and life outside work specifies three types of work-nonwork conflict: time, strain, and behavior-based. Overlooked in these models is a cognitive-based type of conflict whereby individuals experience work-nonwork conflict from cognitive preoccupation with work. Four studies on six different groups (N=549) were undertaken to develop and validate an initial measure of this construct. Structural equation modeling confirmed a two-factor, nine-item scale. Hypotheses regarding cognitive-based conflict's relationship with life satisfaction, work involvement, work-nonwork conflict, and work hours were supported. The relationship with knowledge work was partially supported in that only the cognitive dimension of cognitive-based conflict was related to extent of knowledge work. Hypotheses regarding cognitive-based conflict's relationship with family demands were rejected in that the cognitive dimension correlated positively rather than negatively with number of dependent children and perceived family demands. The study provides encouraging preliminary evidence of scale validity.

Implementation of space satellite remote sensing programs in developing countries (Ecuador)

NASA Technical Reports Server (NTRS)

Segovia, A.

1982-01-01

The current state of space satellite remote sensing programs in developing countries is discussed. Sensors being utilized and results obtained are described. Requirements are presented for the research of resources in developing countries. It is recommended that a work procedure be developed for the use of satellite remote sensing data tailored to the necessities of the different countries.

Nondestructive evaluation techniques for high-temperature ceramic components. Quarterly report, October--December 1977. [Silicon carbide

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1978-02-01

The overall objective of this program is to assess and develop nondestructive evaluation procedures for high-temperature ceramics. The program is currently evaluating ceramic heat-exchanger tubing. Ceramic heat exchangers would be useful, for example, in coal-fired Brayton conversion or waste heat-recovery systems. The use of ceramic heat exchangers will allow working fluids to reach temperatures up to 1230/sup 0/C, and, with further materials development, possibly 1650/sup 0/C. If superalloys were employed, working fluids would be limited to approximately 800/sup 0/C. The use of working fluids at higher temperatures would result in more efficient systems. Furthermore, ceramic components are lighter than metallicmore » ones and are made from less costly and more abundant elements. In addition, ceramic heat exchangers would be more resistant to corrosion. In the current NDE effort, several acoustic, optical, and radiographic techniques are being examined for their effectiveness in testing silicon carbide tubing. Some results employing dye-enhanced radiography are discussed.« less

Thin-film cadmium telluride photovoltaic cells

NASA Astrophysics Data System (ADS)

Compaan, A. D.; Bohn, R. G.

1994-09-01

This report describes work to develop and optimize radio-frequency (RF) sputtering for the deposition of thin films of cadmium telluride (CdTe) and related semiconductors for thin-film solar cells. Pulsed laser physical vapor deposition was also used for exploratory work on these materials, especially where alloying or doping are involved, and for the deposition of cadmium chloride layers. The sputtering work utilized a 2-in diameter planar magnetron sputter gun. The film growth rate by RF sputtering was studied as a function of substrate temperature, gas pressure, and RF power. Complete solar cells were fabricated on tin-oxide-coated soda-lime glass substrates. Currently, work is being done to improve the open-circuit voltage by varying the CdTe-based absorber layer, and to improve the short-circuit current by modifying the CdS window layer.

Developing Mathematical Habits of Mind

ERIC Educational Resources Information Center

Mark, June; Cuoco, Al; Goldenberg, E. Paul; Sword, Sarah

2010-01-01

"Mathematical habits of mind" include reasoning by continuity, looking at extreme cases, performing thought experiments, and using abstraction that mathematicians use in their work. Current recommendations emphasize the critical nature of developing these habits of mind: "Once this kind of thinking is established, students can apply it in the…

The Bayesian Revolution Approaches Psychological Development

ERIC Educational Resources Information Center

Shultz, Thomas R.

2007-01-01

This commentary reviews five articles that apply Bayesian ideas to psychological development, some with psychology experiments, some with computational modeling, and some with both experiments and modeling. The reviewed work extends the current Bayesian revolution into tasks often studied in children, such as causal learning and word learning, and…

Preparing for the Millennium.

ERIC Educational Resources Information Center

Scaglione, Chris

1998-01-01

In 2000, any automated system that processes dates may stop working completely or produce unexpected or unwanted results. School administrators should obtain a complete listing of all currently used systems, prioritize them, contact hardware and software providers to verify Y2K compliance, develop resolution plans with vendors, develop assessment…

42 CFR 124.705 - Amount of recovery.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES HEALTH RESOURCES DEVELOPMENT... calculating a reproduction value using construction cost indexes or current costs per square foot for... under the Public Works and Economic Development Act of 1965 (42 U.S.C. 3121, et seq.) or the Local...

42 CFR 124.705 - Amount of recovery.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES HEALTH RESOURCES DEVELOPMENT... calculating a reproduction value using construction cost indexes or current costs per square foot for... under the Public Works and Economic Development Act of 1965 (42 U.S.C. 3121, et seq.) or the Local...

Recent advances in the development and transfer of machine vision technologies for space

NASA Technical Reports Server (NTRS)

Defigueiredo, Rui J. P.; Pendleton, Thomas

1991-01-01

Recent work concerned with real-time machine vision is briefly reviewed. This work includes methodologies and techniques for optimal illumination, shape-from-shading of general (non-Lambertian) 3D surfaces, laser vision devices and technology, high level vision, sensor fusion, real-time computing, artificial neural network design and use, and motion estimation. Two new methods that are currently being developed for object recognition in clutter and for 3D attitude tracking based on line correspondence are discussed.

Exploration, Development, and Validation of Patient-reported Outcomes in Antineutrophil Cytoplasmic Antibody–associated Vasculitis Using the OMERACT Process

PubMed Central

Robson, Joanna C.; Milman, Nataliya; Tomasson, Gunnar; Dawson, Jill; Cronholm, Peter F.; Kellom, Katherine; Shea, Judy; Ashdown, Susan; Boers, Maarten; Boonen, Annelies; Casey, George C.; Farrar, John T.; Gebhart, Don; Krischer, Jeffrey; Lanier, Georgia; McAlear, Carol A.; Peck, Jacqueline; Sreih, Antoine G.; Tugwell, Peter; Luqmani, Raashid A.; Merkel, Peter A.

2016-01-01

Objective Antineutrophil cytoplasmic antibody (ANCA)-associated vasculitis (AAV) is a group of linked multisystem life- and organ-threatening diseases. The Outcome Measures in Rheumatology (OMERACT) vasculitis working group has been at the forefront of outcome development in the field and has achieved OMERACT endorsement of a core set of outcomes for AAV. Patients with AAV report as important some manifestations of disease not routinely collected through physician-completed outcome tools; and they rate common manifestations differently from investigators. The core set includes the domain of patient-reported outcomes (PRO). However, PRO currently used in clinical trials of AAV do not fully characterize patients’ perspectives on their burden of disease. The OMERACT vasculitis working group is addressing the unmet needs for PRO in AAV. Methods Current activities of the working group include (1) evaluating the feasibility and construct validity of instruments within the PROMIS (Patient-Reported Outcome Measurement Information System) to record components of the disease experience among patients with AAV; (2) creating a disease-specific PRO measure for AAV; and (3) applying The International Classification of Functioning, Disability and Health to examine the scope of outcome measures used in AAV. Results The working group has developed a comprehensive research strategy, organized an investigative team, included patient research partners, obtained peer-reviewed funding, and is using a considerable research infrastructure to complete these interrelated projects to develop evidence-based validated outcome instruments that meet the OMERACT filter of truth, discrimination, and feasibility. Conclusion The OMERACT vasculitis working group is on schedule to achieve its goals of developing validated PRO for use in clinical trials of AAV. (First Release September 1 2015; J Rheumatol 2015;42:2204–9; doi:10.3899/jrheum.141143) PMID:26329344

The trials and tribulations of a practitioner-researcher: challenges and lessons learned through testing a feminist-cognitive-relational social work model of practice.

PubMed

Dombo, Eileen A; Bass, Ami P

2014-01-01

In practice with adult women who survived childhood sexual abuse, the field of social work currently lacks an evidence-based intervention. The current interventions, from the 1990s, come primarily from psychologists. The hypothesis that the Feminist-Cognitive-Relational Social Work Model and Intervention will be more effective in decreasing cognitive distortions, and increasing intimacy and relational health when compared to the standard agency intervention was tested in a quasi-experimental study. The challenges in carrying out the study in small, non-profit organizations are explored to highlight the difficulties in developing evidence-based interventions. Changes to implementation that resulted from the research findings are discussed.

Youth Work Training Package Review: More of the Same or Radical Rationalisation?

ERIC Educational Resources Information Center

Corney, Tim; Broadbent, Robyn

2007-01-01

The development of a national youth work training package in Australia began over 15 years ago. The current package sits under the umbrella of the general Community Services Industry Training Package. The first stage of a review of this package has been completed and the subsequent report not only confirms the recent trend towards the…

Leadership-Driven Anger Management Groups for Adolescents: Do They Really Work?

ERIC Educational Resources Information Center

Burt, Isaac

2018-01-01

This study investigated a current trend in anger-management groups labeled as leadership development. The goal of the investigation was to determine if leadership is a critical factor in working with angry youth. A total of 52 middle school-aged adolescents from 2 schools served as participants. Of those, 18 participants received a strength-based,…

Working Memory Development in Children with Mild to Borderline Intellectual Disabilities

ERIC Educational Resources Information Center

Van der Molen, M. J.; Henry, L. A.; Van Luit, J. E. H.

2014-01-01

Background: The purpose of the current cross-sectional study was to examine the developmental progression in working memory (WM) between the ages of 9 and 16 years in a large sample of children with mild to borderline intellectual disabilities (MBID). Baddeley's influential WM model was used as a theoretical framework. Furthermore, the…

The Association between Infants' Attention Control and Social Inhibition Is Moderated by Genetic and Environmental Risk for Anxiety

ERIC Educational Resources Information Center

Brooker, Rebecca J.; Neiderhiser, Jenae M.; Kiel, Elizabeth J.; Leve, Leslie D.; Shaw, Daniel S.; Reiss, David

2011-01-01

Infant social inhibition is associated with increased risk for anxiety later in life. Although both genetic and environmental factors are associated with anxiety, little empirical work has addressed how developing regulatory abilities work with genetic and environmental risk to exacerbate or mitigate problem behaviors. The current study was aimed…

Getting People Involved: The Benefit of Intellectual Capital Management for Addressing HR Challenges

ERIC Educational Resources Information Center

Pook, Katja

2011-01-01

Purpose: This paper aims to explore the benefits of intellectual capital assessment for facing current challenges of human resources work and organizational development. Design/methodology/approach: The paper takes findings of studies on challenges in HR work and maps them with features of intellectual capital assessment methods. It is thus a…

Exploring Identities and Cultures in Inter-Professional Education and Collaborative Professional Practice

ERIC Educational Resources Information Center

Floyd, Alan; Morrison, Marlene

2014-01-01

Although the concept of multi-agency working has been pursued and adopted as the most appropriate way to improve childcare provision and health workforces in recent years, both in the UK and more globally, research suggests that participation in such work can be problematic. This article examines current developments in inter-professional…

Values, Predicaments, and Countermeasures for a Model Combining Learning with Working in Higher Vocational Education

ERIC Educational Resources Information Center

Cheng, Jun

2014-01-01

Combining learning with working is a fundamental way to deepen teaching reform in higher vocational education. Based on an analysis of the social value, individual value, educational value, and current predicaments of higher vocational education, this article explores effective ways to realize the value of this talent development model and…

The Role of the Company in Generating Skills. The Learning Effects of Work Organization. Portugal.

ERIC Educational Resources Information Center

Rodriguez, Maria Joao; Lopes, Helena

The impact of changes in work organization on development of Portugese workers' skills was examined. At the macro level, a national study was conducted to identify current and possible future relationships among initial training, continuing training, the labor market, and industrial relations in Portugal. At the micro level, cases studies of three…

Caesy: A software tool for computer-aided engineering

NASA Technical Reports Server (NTRS)

Wette, Matt

1993-01-01

A new software tool, Caesy, is described. This tool provides a strongly typed programming environment for research in the development of algorithms and software for computer-aided control system design. A description of the user language and its implementation as they currently stand are presented along with a description of work in progress and areas of future work.

The "New" DSW Is Here: Supporting Degree Completion and Student Success

ERIC Educational Resources Information Center

Diaz, Mery

2015-01-01

Some have questioned whether there should be a practice doctorate in social work. Academics and other key stakeholders would appear to agree that the degree has a role within 21st-century social work practice and education. Practitioners increasingly seek out the degree, and current and emerging programs have developed to meet that demand. This…

Environmental awareness program development

NASA Technical Reports Server (NTRS)

Steinhauer, David A.

1995-01-01

Work this summer in the Office of Safety, Environment, and Mission Assurance began with a review of current initiatives and environmental projects at the Langley Research Center (LaRC). This involved researching many of the documents on file which detail problems which have occurred as well as various approaches which have been used to address these problems. A large portion of the time was spent interviewing and working with each of the engineers, industrial hygienists and other professionals connected with the Office of Environmental Engineering. A few of the projects I worked on include: Researching environmental compliance, and pollution prevention efforts; touring many of the facilities at LaRC to observe the environmental efforts in the work place; researching equipment needs for the recycling/reclamation center; writing scripts for in-house training videos; working with the video production department to produce a training video; developing e-mail distribution list; developing environmental coordinator's database; and working with others to research logistics of recycling and waste minimization efforts.

Instrumentation for motor-current signature analysis using synchronous sampling

DOE Office of Scientific and Technical Information (OSTI.GOV)

Castleberry, K.N.

1996-07-01

Personnel in the Instrumentation and Controls Division at Oak Ridge National Laboratory, in association with the United States Enrichment Corporation, the U.S. Navy, and various Department of Energy sponsors, have been involved in the development and application of motor-current signature analysis for several years. In that time, innovation in the field has resulted in major improvements in signal processing, analysis, and system performance and capabilities. Recent work has concentrated on industrial implementation of one of the most promising new techniques. This report describes the developed method and the instrumentation package that is being used to investigate and develop potential applications.

Assessing the Impact of Development Disruptions and Dependencies in Analysis of Alternatives of System-of-Systems

DTIC Science & Technology

2012-12-31

WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) Purdue University,West Lafayette,IN,47907 8. PERFORMING ORGANIZATION REPORT...operational independence, yet, must work cohesively to achieve an overarching set of capabilities. Current guidelines set forth by the Department of Defense...architectures; these methods will be further matured and enhanced in follow-up research work under RT-44. 15. SUBJECT TERMS 16. SECURITY

The ethics of developed nations recruiting nurses from developing countries: the case of Malawi.

PubMed

Muula, Adamson S; Mfutso-Bengo, Joseph M; Makoza, Joan; Chatipwa, Elita

2003-07-01

There is currently a global shortage of nurses. Developing countries such as Malawiare among those hardest hit by this shortage. The demands on available nurses have increased and at the same time there is a lack of interest in becoming a nurse owing to the poor working conditions among those still employed in the service. It is questionable if developed nations should recruit nurses from countries such as Malawi, where severe human resource constraints are being experienced. We argue in this article that the current phenomenon of nurses leaving developing nations for western countries is complex. Human rights issues of individual autonomy and public interest are at stake.

Beyond motivation: job and work design for development, health, ambidexterity, and more.

PubMed

Parker, Sharon K

2014-01-01

Much research shows it is possible to design motivating work, which has positive consequences for individuals and their organizations. This article reviews research that adopts this motivational perspective on work design, and it emphasizes that it is important to continue to refine motivational theories. In light of continued large numbers of poor-quality jobs, attention must also be given to influencing practice and policy to promote the effective implementation of enriched work designs. Nevertheless, current and future work-based challenges mean that designing work for motivation is necessary but insufficient. This review argues that work design can be a powerful vehicle for learning and development, for maintaining and enhancing employees' physical and mental health, and for achieving control and flexibility simultaneously (for example, in the form of ambidexterity); all these outcomes are important given the challenges in today's workplaces. The review concludes by suggesting methodological directions.

Theoretical relation between halo current-plasma energy displacement/deformation in EAST

NASA Astrophysics Data System (ADS)

Khan, Shahab Ud-Din; Khan, Salah Ud-Din; Song, Yuntao; Dalong, Chen

2018-04-01

In this paper, theoretical model for calculating halo current has been developed. This work attained novelty as no theoretical calculations for halo current has been reported so far. This is the first time to use theoretical approach. The research started by calculating points for plasma energy in terms of poloidal and toroidal magnetic field orientations. While calculating these points, it was extended to calculate halo current and to developed theoretical model. Two cases were considered for analyzing the plasma energy when flows down/upward to the diverter. Poloidal as well as toroidal movement of plasma energy was investigated and mathematical formulations were designed as well. Two conducting points with respect to (R, Z) were calculated for halo current calculations and derivations. However, at first, halo current was established on the outer plate in clockwise direction. The maximum generation of halo current was estimated to be about 0.4 times of the plasma current. A Matlab program has been developed to calculate halo current and plasma energy calculation points. The main objective of the research was to establish theoretical relation with experimental results so as to precautionary evaluate the plasma behavior in any Tokamak.

[Job crisis and transformations in the new model of accumulation].

PubMed

Zerda-Sarmiento, Alvaro

2012-06-01

The general and structural crisis capitalism is going through is the token of the difficulties accumulation model has been dealing with since 70's in developed countries. This model has been trying to settle down again on the basis of neoliberal principle and a new technical-economical paradigm. The new accumulation pattern has had a effect in employment sphere which have been made evident at all the elements that constitute work relationships. In Colombia, this model implementation has been partial and segmented. However, its consequences (and the long-term current crisis) have been evident in unemployment, precarious work, segmentation, informal work and restricted and private health insurance. Besides, financial accumulation makes labour profits flow at different levels. The economic model current government has aimed to implement leads to strengthening exports, so making population life conditions more difficult. In order to overcome the current state of affairs, the work sphere needs to become more creative. This creative approach should look for new schemes for expression and mobilization of work sphere's claims. This is supposed to be done by establishing a different economic model aimed to build a more inclusive future, with social justice.

Occupational rehabilitation in Hong Kong: current status and future needs.

PubMed

Kwok, H K H; Szeto, G P Y; Cheng, A S K; Siu, H; Chan, C C H

2011-03-01

This paper reviews the development of occupational rehabilitation in Hong Kong, both in terms of the science as well as the service for injured workers. Besides, it also reviews the existing Employees' Compensation Ordinance for work injury to illustrate how the policy could influence the success and development of the discipline. Five experienced occupational rehabilitation providers, including 1 occupational medicine specialist, 3 occupational therapists, and 1 physiotherapist critically reviewed the past and current development of occupational rehabilitation in Hong Kong as well as the local contextual factors, which could influence its future development. Since the enactment of the Employees' Compensation Ordinance in the 1950s, there have been progressive improvements in the field of occupational rehabilitation in Hong Kong. Services in the early years were mostly based on the biomedical model, where doctors and patients tended to focus on clinical symptoms and physical pathology when making clinical decisions. Since then, remarkable academic achievements have been made in the field locally, from the validation of clinical instruments for assessment of work capacity, assessment of employment readiness to the evaluation of efficacy of interventional programs for injured workers focusing on work related outcomes. However, there has been a relatively lack of progress in the development of related policies and implementation of related programs for occupational rehabilitation. There is no built in linkage between rehabilitation, compensation and prevention in the current system in Hong Kong, and there is no rehabilitation policy specific to those workers with occupational diseases and injuries. There are still deficiencies in the development and provision of occupational rehabilitation services in Hong Kong. Incorporation of requirements for occupational rehabilitation at the legislation and policy levels should be seriously considered in the future. Besides, the development of the Occupational Medicine subspecialty in the public hospital system in Hong Kong is considered a facilitator to the future development of occupational rehabilitation in Hong Kong.

[Drawing up a Guideline for Handling Information and Communication Technology, Flexibility and Availability in Small and Medium Enterprises].

PubMed

Weilnhammer, Veronika; Heinze, Stefanie; Heiden, Barbara; Palm, Esther; Herbig, Britta; Lüke, Gabriele; Nowak, Dennis; Glaser, Jürgen; Herr, Caroline Eva Wella

2017-06-06

Background Within the last decades the world of work has changed enormously. Due to new Information and Communication Technologies (ICT), working at any time from any place has become possible. Flexibility, availability and the dissolution of boundaries between work and private life are the possible results of this development. The spread of this development and possible consequences on the affected employee's health and wellbeing have been examined so far especially in big companies. Small and medium-sized enterprises (SME) are rarely subjects of scientific studies in this context. Objective of this paper The aim of this work was to develop a guideline based on experiences and results of a study regarding flexibility in the business world (FlexA), as well as a systematic literature research. The target populations of this guideline are SMEs, focusing on integrating a health promoting way in dealing with ICT, flexibility and availability within the corporate culture. Methods In order to delineate the current state in of research in ICT-related work interventions, a systematic review in data bases e. g. PsycINFO, EconLit and Medline was carried out. The search strategy used the key words "work", "intervention", "ICT", "mental strain", "flexibility" and "availability". In addition, grey literature and findings from the FlexA study were used to formulate the current guideline. Results Based on the exclusion criteria, all studies from the systematic literature search were excluded after title and abstract screening. Within grey literature research, 4 relevant publications could be identified. The measures, developed during the corporate workshops of the FlexA study, e. g. the implementation of collective regulations in the company, were included in the guideline. Conclusion Due to the ongoing development of ICT and flexibility in daily business life, it is getting more and more important to follow this progress. Executives and corporate management are responsible to actively shape this trend in a health-promoting way in their enterprises. The current guideline was made to support the corporate management in this task and it is an important instrument for a health-promoting use of ICT in daily business life taking in to consideration flexibility and availability. © Georg Thieme Verlag KG Stuttgart · New York.

How to Deal with Emotional Abuse and Neglect--Further Development of a Conceptual Framework (FRAMEA)

ERIC Educational Resources Information Center

Glaser, Danya

2011-01-01

Objective: To develop further the understanding of emotional abuse and neglect. Methods: Building on previous work, this paper describes the further development of a conceptual framework for the recognition and management of emotional abuse and neglect. Training in this framework is currently being evaluated. The paper also briefly reviews more…

Research Directions for the 70's in Child Development.

ERIC Educational Resources Information Center

Sparling, Joseph J.; Gallagher, James J.

This booklet is based on a series of 1971 conferences attended by 22 prominent individuals in the field of child development research. Conference participants met in three working panels (on infancy, the preschool child, and the school age child) to assess the current status of the child development research field and to project research needs for…

A Mandala of Faculty Development: Using Theory-Based Evaluation to Explore Contexts, Mechanisms and Outcomes

ERIC Educational Resources Information Center

Onyura, Betty; Ng, Stella L.; Baker, Lindsay R.; Lieff, Susan; Millar, Barbara-Ann; Mori, Brenda

2017-01-01

Demonstrating the impact of faculty development, is an increasingly mandated and ever elusive goal. Questions have been raised about the adequacy of current approaches. Here, we integrate realist and theory-driven evaluation approaches, to evaluate an intensive longitudinal program. Our aim is to elucidate how faculty development can work to…

Education and Identity. Second Edition. The Jossey-Bass Higher and Adult Education Series.

ERIC Educational Resources Information Center

Chickering, Arthur W.; Reisser, Linda

Developing policies and practices to create higher education environments that will foster broad-based development of human talent and potentials is the focus of this fully revised and updated edition, which adds findings from the last 25 years to a classic work. The volume begins with "A Current Theoretical Context for Student Development," which…

A New Metre for Cheap, Quick, Reliable and Simple Thermal Transmittance (U-Value) Measurements in Buildings.

PubMed

Andújar Márquez, José Manuel; Martínez Bohórquez, Miguel Ángel; Gómez Melgar, Sergio

2017-09-03

This paper deals with the thermal transmittance measurement focused on buildings and specifically in building energy retrofitting. Today, if many thermal transmittance measurements in a short time are needed, the current devices, based on the measurement of the heat flow through the wall, cannot carry out them, except if a great amount of devices are used at once along with intensive and tedious post-processing and analysis work. In this paper, from well-known physical laws, authors develop a methodology based on three temperatures measurements, which is implemented by a novel thermal transmittance metre. The paper shows its development step by step. As a result the developed device is modular, scalable, and fully wireless; it is capable of taking as many measurements at once as user needs. The developed system is compared working together on a same test to the currently used one based on heat flow. The results show that the developed metre allows carrying out thermal transmittance measurements in buildings in a cheap, quick, reliable and simple way.

Developing Carbon Nanotube Standards at NASA

NASA Technical Reports Server (NTRS)

Nikolaev, Pasha; Arepalli, Sivaram; Sosa, Edward; Gorelik, Olga; Yowell, Leonard

2007-01-01

Single wall carbon nanotubes (SWCNTs) are currently being produced and processed by several methods. Many researchers are continuously modifying existing methods and developing new methods to incorporate carbon nanotubes into other materials and utilize the phenomenal properties of SWCNTs. These applications require availability of SWCNTs with known properties and there is a need to characterize these materials in a consistent manner. In order to monitor such progress, it is critical to establish a means by which to define the quality of SWCNT material and develop characterization standards to evaluate of nanotube quality across the board. Such characterization standards should be applicable to as-produced materials as well as processed SWCNT materials. In order to address this issue, NASA Johnson Space Center has developed a protocol for purity and dispersion characterization of SWCNTs (Ref.1). The NASA JSC group is currently working with NIST, ANSI and ISO to establish purity and dispersion standards for SWCNT material. A practice guide for nanotube characterization is being developed in cooperation with NIST (Ref.2). Furthermore, work is in progress to incorporate additional characterization methods for electrical, mechanical, thermal, optical and other properties of SWCNTs.

Developing Carbon Nanotube Standards at NASA

NASA Technical Reports Server (NTRS)

Nikolaev, Pasha; Arepalli, Sivaram; Sosa, Edward; Gorelik, Olga; Yowell, Leonard

2007-01-01

Single wall carbon nanotubes (SWCNTs) are currently being produced and processed by several methods. Many researchers are continuously modifying existing methods and developing new methods to incorporate carbon nanotubes into other materials and utilize the phenomenal properties of SWCNTs. These applications require availability of SWCNTs with known properties and there is a need to characterize these materials in a consistent manner. In order to monitor such progress, it is critical to establish a means by which to define the quality of SWCNT material and develop characterization standards to evaluate of nanotube quality across the board. Such characterization standards should be applicable to as-produced materials as well as processed SWCNT materials. In order to address this issue, NASA Johnson Space Center has developed a protocol for purity and dispersion characterization of SWCNTs. The NASA JSC group is currently working with NIST, ANSI and ISO to establish purity and dispersion standards for SWCNT material. A practice guide for nanotube characterization is being developed in cooperation with NIST. Furthermore, work is in progress to incorporate additional characterization methods for electrical, mechanical, thermal, optical and other properties of SWCNTs.

Spin-polarized currents generated by magnetic Fe atomic chains.

PubMed

Lin, Zheng-Zhe; Chen, Xi

2014-06-13

Fe-based devices are widely used in spintronics because of high spin-polarization and magnetism. In this work, freestanding Fe atomic chains, the thinnest wires, were used to generate spin-polarized currents due to the spin-polarized energy bands. By ab initio calculations, the zigzag structure was found to be more stable than the wide-angle zigzag structure and had a higher ratio of spin-up and spin-down currents. By our theoretical prediction, Fe atomic chains have a sufficiently long thermal lifetime only at T ≦̸ 150 K, while C atomic chains are very stable even at T = 1000 K. This means that the spintronic devices based on Fe chains could work only at low temperatures. A system constructed by a short Fe chain sandwiched between two graphene electrodes could be used as a spin-polarized current generator, while a C chain could not be used in this way. The present work may be instructive and meaningful to further practical applications based on recent technical developments on the preparation of metal atomic chains (Proc. Natl. Acad. Sci. USA 107 9055 (2010)).

Rationale, design and methods of the Study of Work and Pain (SWAP): a cluster randomised controlled trial testing the addition of a vocational advice service to best current primary care for patients with musculoskeletal pain (ISRCTN 52269669)

PubMed Central

2014-01-01

Background Musculoskeletal pain is a major contributor to short and long term work absence. Patients seek care from their general practitioner (GP) and yet GPs often feel ill-equipped to deal with work issues. Providing a vocational case management service in primary care, to support patients with musculoskeletal problems to remain at or return to work, is one potential solution but requires robust evaluation to test clinical and cost-effectiveness. Methods/Design This protocol describes a cluster randomised controlled trial, with linked qualitative interviews, to investigate the effect of introducing a vocational advice service into general practice, to provide a structured approach to managing work related issues in primary care patients with musculoskeletal pain who are absent from work or struggling to remain in work. General practices (n = 6) will be randomised to offer best current care or best current care plus a vocational advice service. Adults of working age who are absent from or struggling to remain in work due to a musculoskeletal pain problem will be invited to participate and 330 participants will be recruited. Data collection will be through patient completed questionnaires at baseline, 4 and 12 months. The primary outcome is self-reported work absence at 4 months. Incremental cost-utility analysis will be undertaken to calculate the cost per additional QALY gained and incremental net benefits. A linked interview study will explore the experiences of the vocational advice service from the perspectives of GPs, nurse practitioners (NPs), patients and vocational advisors. Discussion This paper presents the rationale, design, and methods of the Study of Work And Pain (SWAP) trial. The results of this trial will provide evidence to inform primary care practice and guide the development of services to provide support for musculoskeletal pain patients with work-related issues. Trial registration Current Controlled Trials ISRCTN52269669. PMID:25012813

Rationale, design and methods of the Study of Work and Pain (SWAP): a cluster randomised controlled trial testing the addition of a vocational advice service to best current primary care for patients with musculoskeletal pain (ISRCTN 52269669).

PubMed

Bishop, Annette; Wynne-Jones, Gwenllian; Lawton, Sarah A; van der Windt, Danielle; Main, Chris; Sowden, Gail; Burton, A Kim; Lewis, Martyn; Jowett, Sue; Sanders, Tom; Hay, Elaine M; Foster, Nadine E

2014-07-10

Musculoskeletal pain is a major contributor to short and long term work absence. Patients seek care from their general practitioner (GP) and yet GPs often feel ill-equipped to deal with work issues. Providing a vocational case management service in primary care, to support patients with musculoskeletal problems to remain at or return to work, is one potential solution but requires robust evaluation to test clinical and cost-effectiveness. This protocol describes a cluster randomised controlled trial, with linked qualitative interviews, to investigate the effect of introducing a vocational advice service into general practice, to provide a structured approach to managing work related issues in primary care patients with musculoskeletal pain who are absent from work or struggling to remain in work. General practices (n = 6) will be randomised to offer best current care or best current care plus a vocational advice service. Adults of working age who are absent from or struggling to remain in work due to a musculoskeletal pain problem will be invited to participate and 330 participants will be recruited. Data collection will be through patient completed questionnaires at baseline, 4 and 12 months. The primary outcome is self-reported work absence at 4 months. Incremental cost-utility analysis will be undertaken to calculate the cost per additional QALY gained and incremental net benefits. A linked interview study will explore the experiences of the vocational advice service from the perspectives of GPs, nurse practitioners (NPs), patients and vocational advisors. This paper presents the rationale, design, and methods of the Study of Work And Pain (SWAP) trial. The results of this trial will provide evidence to inform primary care practice and guide the development of services to provide support for musculoskeletal pain patients with work-related issues. Current Controlled Trials ISRCTN52269669.

Fiber-Optic Sensing for In-Space Inspection

NASA Technical Reports Server (NTRS)

Pena, Francisco; Richards, W. Lance; Piazza, Anthony; Parker, Allen R.; Hudson, Larry D.

2014-01-01

This presentation provides examples of fiber optic sensing technology development activities performed at NASA Armstrong. Examples of current and previous work that support in-space inspection techniques and methodologies are highlighted.

Life circumstances of women entering sex work in Nagaland, India.

PubMed

Bowen, Kathryn J; Dzuvichu, Bernice; Rungsung, Rachel; Devine, Alexandra E; Hocking, Jane; Kermode, Michelle

2011-11-01

The study objective was to enhance understanding of female sex workers' lives in Nagaland, India (one of the country's highest HIV prevalence states), to inform the development of interventions to reduce HIV transmission and assist women who want to leave sex work. A cross-sectional survey (n = 220) and semi-structured interviews (n = 30) were conducted with sex workers. Topics included the following: life situation currently and at time of initial engagement in sex work, circumstances of first sex work occasion, and current patterns of sex work. Participants' lives at time of entry into sex work were socio-culturally and economically vulnerable as evidenced by the early age of sexual debut, low levels of education, unemployment, absence of protective male partners, and poor relationships with families. Participants experienced high levels of mobility, insecure accommodation, the need to financially support family, and the demand to give a portion of their income to others. The use of alcohol and other drugs, including heroin, was widespread. For these women, sex work can be seen as a pragmatic option for earning sufficient income to live. The women's lives would be improved by strategies to promote their health, ensure their safety, and protect their rights as long as they are engaging in sex work. This is likely to benefit not only the sex workers but also their children, their families, and the wider community. The development of alternative employment opportunities is vital to protect against entry into sex work and to support women who want to exit sex work.

The Distributed Space Exploration Simulation (DSES)

NASA Technical Reports Server (NTRS)

Crues, Edwin Z.; Chung, Victoria I.; Blum, Mike G.; Bowman, James D.

2007-01-01

The paper describes the Distributed Space Exploration Simulation (DSES) Project, a research and development collaboration between NASA centers which focuses on the investigation and development of technologies, processes and integrated simulations related to the collaborative distributed simulation of complex space systems in support of NASA's Exploration Initiative. This paper describes the three major components of DSES: network infrastructure, software infrastructure and simulation development. In the network work area, DSES is developing a Distributed Simulation Network that will provide agency wide support for distributed simulation between all NASA centers. In the software work area, DSES is developing a collection of software models, tool and procedures that ease the burden of developing distributed simulations and provides a consistent interoperability infrastructure for agency wide participation in integrated simulation. Finally, for simulation development, DSES is developing an integrated end-to-end simulation capability to support NASA development of new exploration spacecraft and missions. This paper will present current status and plans for each of these work areas with specific examples of simulations that support NASA's exploration initiatives.

Addressing the migration of health professionals: the role of working conditions and educational placements.

PubMed

Witt, Julia

2009-11-18

This article provides a brief overview of the global health-worker shortage, which could undermine the Millennium Development Goal to halt and begin to reverse the spread of HIV/AIDS. The current situation suggests that long-term solutions to shortages can only be found by addressing the problem from a global perspective; that is, to eliminate shortages through substantial investments in training and retaining health workers in developed and developing countries, and not through policies that do not work towards solving this underlying problem, such as ones that restrict migration.

Novel optical strategies for biodetection

NASA Astrophysics Data System (ADS)

Sakamuri, Rama M.; Wolfenden, Mark S.; Anderson, Aaron S.; Swanson, Basil I.; Schmidt, Jurgen S.; Mukundan, Harshini

2013-09-01

Although bio-detection strategies have significantly evolved in the past decade, they still suffer from many disadvantages. For one, current approaches still require confirmation of pathogen viability by culture, which is the `gold-standard' method, and can take several days to result. Second, current methods typically target protein and nucleic acid signatures and cannot be applied to other biochemical categories of biomarkers (e.g.; lipidated sugars). Lipidated sugars (e.g.; lipopolysaccharide, lipoarabinomannan) are bacterial virulence factors that are significant to pathogenicity. Herein, we present two different optical strategies for biodetection to address these two limitations. We have exploited bacterial iron sequestration mechanisms to develop a simple, specific assay for the selective detection of viable bacteria, without the need for culture. We are currently working on the use of this technology for the differential detection of two different bacteria, using siderophores. Second, we have developed a novel strategy termed `membrane insertion' for the detection of amphiphilic biomarkers (e.g. lipidated glycans) that cannot be detected by conventional approaches. We have extended this technology to the detection of small molecule amphiphilic virulence factors, such as phenolic glycolipid-1 from leprosy, which could not be directly detected before. Together, these strategies address two critical limitations in current biodetection approaches. We are currently working on the optimization of these methods, and their extension to real-world clinical samples.

On-board fault management for autonomous spacecraft

NASA Technical Reports Server (NTRS)

Fesq, Lorraine M.; Stephan, Amy; Doyle, Susan C.; Martin, Eric; Sellers, Suzanne

1991-01-01

The dynamic nature of the Cargo Transfer Vehicle's (CTV) mission and the high level of autonomy required mandate a complete fault management system capable of operating under uncertain conditions. Such a fault management system must take into account the current mission phase and the environment (including the target vehicle), as well as the CTV's state of health. This level of capability is beyond the scope of current on-board fault management systems. This presentation will discuss work in progress at TRW to apply artificial intelligence to the problem of on-board fault management. The goal of this work is to develop fault management systems. This presentation will discuss work in progress at TRW to apply artificial intelligence to the problem of on-board fault management. The goal of this work is to develop fault management systems that can meet the needs of spacecraft that have long-range autonomy requirements. We have implemented a model-based approach to fault detection and isolation that does not require explicit characterization of failures prior to launch. It is thus able to detect failures that were not considered in the failure and effects analysis. We have applied this technique to several different subsystems and tested our approach against both simulations and an electrical power system hardware testbed. We present findings from simulation and hardware tests which demonstrate the ability of our model-based system to detect and isolate failures, and describe our work in porting the Ada version of this system to a flight-qualified processor. We also discuss current research aimed at expanding our system to monitor the entire spacecraft.

Global Education and Education for Sustainability

ERIC Educational Resources Information Center

Scheunpflug, Annette; Asbrand, Barbara

2006-01-01

This article focuses on the relationship between development education/global education and education for sustainability. A short introduction describes the current use of the term "global education" and the different groups working and competing within this area in the development field. In the first part, the history of the concept of "global…

How Children Grow--Musically.

ERIC Educational Resources Information Center

Scott, Carol Rogel

1989-01-01

Reviews current research findings in the field of music in early childhood. Focuses on the musical development of the average child, citing evidence of music cognition and of music production. Reports some model programs established by music educators to work with parents and preschools to encourage musical development in the young child. (LS)

A Software Development Approach for Computer Assisted Language Learning

ERIC Educational Resources Information Center

Cushion, Steve

2005-01-01

Over the last 5 years we have developed, produced, tested, and evaluated an authoring software package to produce web-based, interactive, audio-enhanced language-learning material. That authoring package has been used to produce language-learning material in French, Spanish, German, Arabic, and Tamil. We are currently working on increasing…

Issues in Work-Related Education. EAE605 Human Resource Development.

ERIC Educational Resources Information Center

Deakin Univ., Victoria (Australia).

This publication is part of the study materials for the one-semester distance education unit, Human Resource Development, in the Open Campus Program at Deakin University (Australia). It contains three essays that explore the approaches to learning currently modeled within industry. "Training for Women" (Kathy MacDermott) presents the…

Current Research on Moral Education and Development in Europe

ERIC Educational Resources Information Center

Ferguson, Neil

2006-01-01

The Moral and Social Action Interdisciplinary Colloquium (MOSAIC) is an international multidisciplinary network of scholars working within the fields of the philosophy, psychology and sociology of moral development, moral education and moral thought. MOSAIC runs an annual conference, traditionally in June or July. This conference attracts an…

78 FR 1266 - Notice of Intent To Seek Approval To Extend a Current Information Collection

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-08

... (salaries, indirect costs, equipment, etc.), and character of work (basic research, applied research, or.... SUPPLEMENTARY INFORMATION: Title of Collection: Higher Education Research and Development Survey. OMB Control... Project: The Higher Education Research and Development Survey (formerly known as the Survey of Research...

Workshop on Instructional Features and Instructor/Operator Station Design for Training Systems.

ERIC Educational Resources Information Center

Ricard, G. L., Ed.; And Others

These 19 papers review current research and development work related to the operation of the instructor's station of training systems, with emphasis on developing functional station specifications applicable to a variety of simulation-based training situations. Topics include (1) instructional features; (2) instructor/operator station research and…

Culture and Self in Career Development: Working with American Indians

ERIC Educational Resources Information Center

Juntunen, Cindy L.; Cline, Kara

2010-01-01

The career development concerns of American Indians continue to receive limited attention in the vocational or career literature. To address this deficit, the current article will apply the cultural formulation approach to career counseling with American Indians. This article presents information on factors related to cultural and self-identity…

Reading Trajectories of Children with Language Difficulties from Preschool through Fifth Grade

ERIC Educational Resources Information Center

Skibbe, Lori E.; Grimm, Kevin J.; Stanton-Chapman, Tina L.; Justice, Laura M.; Pence, Khara L.; Bowles, Ryan P.

2008-01-01

Purpose: The current work examined which theory of reading development, the "cumulative reading trajectory or the compensatory trajectory of development," most accurately represents the reading trajectories of children with language difficulties (LD) relative to their peers with typical language (TL) skills. Specifically, initial levels of reading…

Educational and Financial Impact of Technology on Workforce Development

ERIC Educational Resources Information Center

Carruth, Paul J.; Carruth, Ann K.

2013-01-01

In the current evolving economic environment, developing and implementing an effective workforce to improve the skills and capability of employees are seen as central to improving individual and organizational performance and competitiveness. The availability of online education in universities as well as the work place has significantly increased…

Software development environment, appendix F

NASA Technical Reports Server (NTRS)

Riddle, W. E.

1980-01-01

The current status in the area of software development environments is assessed. The purposes of environments, the types of environments, the constituents of an environment, the issue of environment integration, and the problems which must be solved in preparing an environment are discussed. Some general maxims to guide near-term future work are proposed.

The Mystery Tubes: Teaching Pupils about Hypothetical Modelling

ERIC Educational Resources Information Center

Kenrick, Carole

2017-01-01

This article recounts the author's working experience of one method by which pupils' understanding of the epistemologies of science can be developed, specifically how scientists can develop hypothetical models and test them through simulations. She currently uses this approach for transition lessons with pupils in upper primary or lower secondary…

Progress Report on the Airborne Metadata and Time Series Working Groups of the 2016 ESDSWG

NASA Astrophysics Data System (ADS)

Evans, K. D.; Northup, E. A.; Chen, G.; Conover, H.; Ames, D. P.; Teng, W. L.; Olding, S. W.; Krotkov, N. A.

2016-12-01

NASA's Earth Science Data Systems Working Groups (ESDSWG) was created over 10 years ago. The role of the ESDSWG is to make recommendations relevant to NASA's Earth science data systems from users' experiences. Each group works independently focusing on a unique topic. Participation in ESDSWG groups comes from a variety of NASA-funded science and technology projects, including MEaSUREs and ROSS. Participants include NASA information technology experts, affiliated contractor staff and other interested community members from academia and industry. Recommendations from the ESDSWG groups will enhance NASA's efforts to develop long term data products. The Airborne Metadata Working Group is evaluating the suitability of the current Common Metadata Repository (CMR) and Unified Metadata Model (UMM) for airborne data sets and to develop new recommendations as necessary. The overarching goal is to enhance the usability, interoperability, discovery and distribution of airborne observational data sets. This will be done by assessing the suitability (gaps) of the current UMM model for airborne data using lessons learned from current and past field campaigns, listening to user needs and community recommendations and assessing the suitability of ISO metadata and other standards to fill the gaps. The Time Series Working Group (TSWG) is a continuation of the 2015 Time Series/WaterML2 Working Group. The TSWG is using a case study-driven approach to test the new Open Geospatial Consortium (OGC) TimeseriesML standard to determine any deficiencies with respect to its ability to fully describe and encode NASA earth observation-derived time series data. To do this, the time series working group is engaging with the OGC TimeseriesML Standards Working Group (SWG) regarding unsatisfied needs and possible solutions. The effort will end with the drafting of an OGC Engineering Report based on the use cases and interactions with the OGC TimeseriesML SWG. Progress towards finalizing recommendations will be presented at the meeting.

I. WORKING MEMORY CAPACITY IN CONTEXT: MODELING DYNAMIC PROCESSES OF BEHAVIOR, MEMORY, AND DEVELOPMENT.

PubMed

Simmering, Vanessa R

2016-09-01

Working memory is a vital cognitive skill that underlies a broad range of behaviors. Higher cognitive functions are reliably predicted by working memory measures from two domains: children's performance on complex span tasks, and infants' performance in looking paradigms. Despite the similar predictive power across these research areas, theories of working memory development have not connected these different task types and developmental periods. The current project takes a first step toward bridging this gap by presenting a process-oriented theory, focusing on two tasks designed to assess visual working memory capacity in infants (the change-preference task) versus children and adults (the change detection task). Previous studies have shown inconsistent results, with capacity estimates increasing from one to four items during infancy, but only two to three items during early childhood. A probable source of this discrepancy is the different task structures used with each age group, but prior theories were not sufficiently specific to explain how performance relates across tasks. The current theory focuses on cognitive dynamics, that is, how memory representations are formed, maintained, and used within specific task contexts over development. This theory was formalized in a computational model to generate three predictions: 1) capacity estimates in the change-preference task should continue to increase beyond infancy; 2) capacity estimates should be higher in the change-preference versus change detection task when tested within individuals; and 3) performance should correlate across tasks because both rely on the same underlying memory system. I also tested a fourth prediction, that development across tasks could be explained through increasing real-time stability, realized computationally as strengthening connectivity within the model. Results confirmed these predictions, supporting the cognitive dynamics account of performance and developmental changes in real-time stability. The monograph concludes with implications for understanding memory, behavior, and development in a broader range of cognitive development. © 2016 The Society for Research in Child Development, Inc.

Transit management certificate program.

DOT National Transportation Integrated Search

2012-07-01

TTI worked closely with the Landscape Architecture and Urban Planning Department : (LAUP) of Texas A&M University (TAMU) to develop a transit management certificate : focus for the current Graduate Certificate in Transportation Planning (CTP) housed ...

Ames Lab 101: Reinventing the Power Cable

ScienceCinema

Russell, Alan

2018-01-16

Ames Laboratory researchers are working to develop new electrical power cables that are stronger and lighter than the cables currently used in the nation's power grid. Nano Tube animation by Iain Goodyear

Separation of Evans and Hiro currents in VDE of tokamak plasma

NASA Astrophysics Data System (ADS)

Galkin, Sergei A.; Svidzinski, V. A.; Zakharov, L. E.

2014-10-01

Progress on the Disruption Simulation Code (DSC-3D) development and benchmarking will be presented. The DSC-3D is one-fluid nonlinear time-dependent MHD code, which utilizes fully 3D toroidal geometry for the first wall, pure vacuum and plasma itself, with adaptation to the moving plasma boundary and accurate resolution of the plasma surface current. Suppression of fast magnetosonic scale by the plasma inertia neglecting will be demonstrated. Due to code adaptive nature, self-consistent plasma surface current modeling during non-linear dynamics of the Vertical Displacement Event (VDE) is accurately provided. Separation of the plasma surface current on Evans and Hiro currents during simulation of fully developed VDE, then the plasma touches in-vessel tiles, will be discussed. Work is supported by the US DOE SBIR Grant # DE-SC0004487.

Working Memory and Neurofeedback.

PubMed

YuLeung To, Eric; Abbott, Kathy; Foster, Dale S; Helmer, D'Arcy

2016-01-01

Impairments in working memory are typically associated with impairments in other cognitive faculties such as attentional processes and short-term memory. This paper briefly introduces neurofeedback as a treatment modality in general, and, more specifically, we review several of the current modalities successfully used in neurofeedback (NF) for the treatment of working memory deficits. Two case studies are presented to illustrate how neurofeedback is applied in treatment. The development of Low Resolution Electromagnetic Tomography (LORETA) and its application in neurofeedback now makes it possible to specifically target deep cortical/subcortical brain structures. Developments in neuroscience concerning neural networks, combined with highly specific yet practical NF technologies, makes neurofeedback of particular interest to neuropsychological practice, including the emergence of specific methodologies for treating very difficult working memory (WM) problems.

Workplace physical activity interventions and moderate-to-vigorous intensity physical activity levels among working-age women: a systematic review protocol.

PubMed

Reed, Jennifer L; Prince, Stephanie A; Cole, Christie A; Fodor, J George; Hiremath, Swapnil; Mullen, Kerri-Anne; Tulloch, Heather E; Wright, Erica; Reid, Robert D

2014-12-19

The rapid pace of modern life requires working-age women to juggle occupational, family and social demands. This modern lifestyle has been shown to have a detrimental effect on health, often associated with increased smoking and alcohol consumption, depression and cardiovascular disease risk factors. Despite the proven benefits of regular moderate-to-vigorous intensity physical activity (MVPA), few are meeting the current physical activity (PA) recommendations of 150 min of MVPA/week. It is important that appropriate and effective behavioural interventions targeting PA are developed and identified to improve the MVPA levels of working-age women. As these women spend a substantial proportion of their waking hours at work, workplaces may be an opportune, efficient and relatively controlled setting to implement programmes and strategies to target PA in an effort to improve MVPA levels and impact cardiometabolic health. The purposes of this systematic review are to compare the effectiveness of individual-level workplace interventions for increasing MVPA levels in working-age women in high-income/developed countries and examine the effectiveness of these interventions for improving the known beneficial health sequelae of MVPA. Eight electronic databases will be searched to identify all prospective cohort and experimental studies that examine the impact of individual-level workplace interventions for increasing MVPA levels among working-age (mean age 18-65 years) women from high-income/developed countries. Grey literature including theses, dissertations and government reports will also be included. Study quality will be assessed using a modified Downs and Black checklist, and risk of bias will be assessed within and across all included studies using the Cochrane's risk of bias tool and Grades of Recommendation, Assessment, Development and Evaluation approach. Meta-analyses will be conducted where possible among studies with sufficient homogeneity. This review will determine the effectiveness of individual-level workplace interventions for increasing MVPA levels in working-age women in high-income/developed countries, and form a current, rigorous and reliable research base for policy makers and stakeholders to support the development and implementation of effective workplace interventions that increase MVPA levels in this population. PROSPERO CRD42014009704.

The Role of Public Policy in Skills Development of Black Workers in the 21st Century. Upjohn Institute Staff Working Paper.

ERIC Educational Resources Information Center

Bartik, Timothy J.; Hollenbeck, Kevin

This paper discusses the role of public policy in the skills development system of the United States. It further examines the implications of that policy for the skill development and career progression of black workers. The paper describes the current "system" for skills development as a two-tiered system composed of (1) the "first…

Selection, Placement and Instatement of School Managers in Turkey: Evaluation of the Current Situation

ERIC Educational Resources Information Center

Memisoglu, Salih Pasa

2015-01-01

The aim of this study is to evaluate the new regulations and current practices in terms of how they apply--to the selection, training and instatement of school administrators in Turkey. The successful implementation of Turkish National Development Plans is closely related to the knowledge and skills of managers working at various levels in every…

Fatigue Crack Growth Behavior Evaluation of Grainex Mar-M 247 for NASA's High Temperature, High Speed Turbine Seal Test Rig

NASA Technical Reports Server (NTRS)

Delgado, Irebert R.; Steinetz, Bruce M.; Rimnac, Clare M.; Lewandowski, John J.

2008-01-01

The fatigue crack growth behavior of Grainex Mar-M 247 is evaluated for NASA s Turbine Seal Test Facility. The facility is used to test air-to-air seals primarily for use in advanced jet engine applications. Because of extreme seal test conditions of temperature, pressure, and surface speeds, surface cracks may develop over time in the disk bolt holes. An inspection interval is developed to preclude catastrophic disk failure by using experimental fatigue crack growth data. By combining current fatigue crack growth results with previous fatigue strain-life experimental work, an inspection interval is determined for the test disk. The fatigue crack growth life of the NASA disk bolt holes is found to be 367 cycles at a crack depth of 0.501 mm using a factor of 2 on life at maximum operating conditions. Combining this result with previous fatigue strain-life experimental work gives a total fatigue life of 1032 cycles at a crack depth of 0.501 mm. Eddy-current inspections are suggested starting at 665 cycles since eddy current detection thresholds are currently at 0.381 mm. Inspection intervals are recommended every 50 cycles when operated at maximum operating conditions.

Development and Testing of High Current Hollow Cathodes for High Power Hall Thrusters

NASA Technical Reports Server (NTRS)

Kamhawi, Hani; Van Noord, Jonathan

2012-01-01

NASA's Office of the Chief Technologist In-Space Propulsion project is sponsoring the testing and development of high power Hall thrusters for implementation in NASA missions. As part of the project, NASA Glenn Research Center is developing and testing new high current hollow cathode assemblies that can meet and exceed the required discharge current and life-time requirements of high power Hall thrusters. This paper presents test results of three high current hollow cathode configurations. Test results indicated that two novel emitter configurations were able to attain lower peak emitter temperatures compared to state-of-the-art emitter configurations. One hollow cathode configuration attained a cathode orifice plate tip temperature of 1132 degC at a discharge current of 100 A. More specifically, test and analysis results indicated that a novel emitter configuration had minimal temperature gradient along its length. Future work will include cathode wear tests, and internal emitter temperature and plasma properties measurements along with detailed physics based modeling.

In vitro fertilization: four decades of reflections and promises.

PubMed

Zhao, Yulian; Brezina, Paul; Hsu, Chao-Chin; Garcia, Jairo; Brinsden, Peter R; Wallach, Edward

2011-09-01

In 2010, Robert Edwards was awarded the Nobel Prize in Medicine for his pioneering work in the development of in vitro fertilization, a field that has touched millions of lives across the globe. Edwards dedicated his career to helping couples overcome infertility. He first established principles of early embryo development that served as the foundation for his later work. In the 1960s, he achieved the first human fertilized oocyte in vitro while at the Johns Hopkins Hospital. He then continued his work at Cambridge University. In 1978, the world witnessed the birth of the first "test tube baby". This achievement is a landmark not only in the reproductive sciences but also in the history of mankind's technological evolution. This article outlines the development and progression of IVF from its infancy to the refined and broadly utilized technology offered to patients today. We describe the evolution of the field and the current state of IVF, including its current technological and social challenges. We congratulate Professor Edwards for his well-deserved recognition as Nobel Laureate in Medicine. This article is a tribute to Edwards for his exceptional accomplishments in this specific and rewarding field of modern medicine. Copyright © 2011 Elsevier B.V. All rights reserved.

Proteomics Standards Initiative: Fifteen Years of Progress and Future Work

PubMed Central

2017-01-01

The Proteomics Standards Initiative (PSI) of the Human Proteome Organization (HUPO) has now been developing and promoting open community standards and software tools in the field of proteomics for 15 years. Under the guidance of the chair, cochairs, and other leadership positions, the PSI working groups are tasked with the development and maintenance of community standards via special workshops and ongoing work. Among the existing ratified standards, the PSI working groups continue to update PSI-MI XML, MITAB, mzML, mzIdentML, mzQuantML, mzTab, and the MIAPE (Minimum Information About a Proteomics Experiment) guidelines with the advance of new technologies and techniques. Furthermore, new standards are currently either in the final stages of completion (proBed and proBAM for proteogenomics results as well as PEFF) or in early stages of design (a spectral library standard format, a universal spectrum identifier, the qcML quality control format, and the Protein Expression Interface (PROXI) web services Application Programming Interface). In this work we review the current status of all of these aspects of the PSI, describe synergies with other efforts such as the ProteomeXchange Consortium, the Human Proteome Project, and the metabolomics community, and provide a look at future directions of the PSI. PMID:28849660

Proteomics Standards Initiative: Fifteen Years of Progress and Future Work.

PubMed

Deutsch, Eric W; Orchard, Sandra; Binz, Pierre-Alain; Bittremieux, Wout; Eisenacher, Martin; Hermjakob, Henning; Kawano, Shin; Lam, Henry; Mayer, Gerhard; Menschaert, Gerben; Perez-Riverol, Yasset; Salek, Reza M; Tabb, David L; Tenzer, Stefan; Vizcaíno, Juan Antonio; Walzer, Mathias; Jones, Andrew R

2017-12-01

The Proteomics Standards Initiative (PSI) of the Human Proteome Organization (HUPO) has now been developing and promoting open community standards and software tools in the field of proteomics for 15 years. Under the guidance of the chair, cochairs, and other leadership positions, the PSI working groups are tasked with the development and maintenance of community standards via special workshops and ongoing work. Among the existing ratified standards, the PSI working groups continue to update PSI-MI XML, MITAB, mzML, mzIdentML, mzQuantML, mzTab, and the MIAPE (Minimum Information About a Proteomics Experiment) guidelines with the advance of new technologies and techniques. Furthermore, new standards are currently either in the final stages of completion (proBed and proBAM for proteogenomics results as well as PEFF) or in early stages of design (a spectral library standard format, a universal spectrum identifier, the qcML quality control format, and the Protein Expression Interface (PROXI) web services Application Programming Interface). In this work we review the current status of all of these aspects of the PSI, describe synergies with other efforts such as the ProteomeXchange Consortium, the Human Proteome Project, and the metabolomics community, and provide a look at future directions of the PSI.

Methodology of Dynamic Monitoring of Structures in the Vicinity of Hydrotechnical Works - Selected Case Studies

NASA Astrophysics Data System (ADS)

Wyjadłowski, Marek

2017-12-01

The constant development of geotechnical technologies imposes the necessity of monitoring techniques to provide a proper quality and the safe execution of geotechnical works. Several monitoring methods enable the preliminary design of work process and current control of hydrotechnical works (pile driving, sheet piling, ground improvement methods). Wave parameter measurements and/or continuous histogram recording of shocks and vibrations and its dynamic impact on engineering structures in the close vicinity of the building site enable the modification of the technology parameters, such as vibrator frequency or hammer drop height. Many examples of practical applications have already been published and provide a basis for the formulation of guidelines, for work on the following sites. In the current work the author's experience gained during sheet piling works for the reconstruction of City Channel in Wrocław (Poland) was presented. The examples chosen describe ways of proceedings in the case of new and old residential buildings where the concrete or masonry walls were exposed to vibrations and in the case of the hydrotechnical structures (sluices, bridges).

Final Report - IHLW PCT, Spinel T1%, Electrical Conductivity, and Viscosity Model Development, VSL-07R1240-4

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kruger, Albert A.; Piepel, Gregory F.; Landmesser, S. M.

2013-11-13

This report is the last in a series of currently scheduled reports that presents the results from the High Level Waste (HLW) glass formulation development and testing work performed at the Vitreous State Laboratory (VSL) of the Catholic University of America (CUA) and the development of IHLW property-composition models performed jointly by Pacific Northwest National Laboratory (PNNL) and VSL for the River Protection Project-Waste Treatment and Immobilization Plant (RPP-WTP). Specifically, this report presents results of glass testing at VSL and model development at PNNL for Product Consistency Test (PCT), one-percent crystal fraction temperature (T1%), electrical conductivity (EC), and viscosity ofmore » HLW glasses. The models presented in this report may be augmented and additional validation work performed during any future immobilized HLW (IHLW) model development work. Completion of the test objectives is addressed.« less

FY 1986 current fiscal year work plan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

This Current Year Work Plan presents in detail a description of the activities to be performed by the Joint Integration Office/RI during FY86. It breaks down the activities into two major work areas: Program Management and Program Analysis. Program Management is performed by the JIO/RI by providing technical planning and guidance for the development of advanced TRU waste management capabilities. This includes equipment/facility design, engineering, construction, and operations. These functions are integrated to allow transition from interim storage to final disposition. JIO/RI tasks include program requirements identification, long-range technical planning, budget development, program planning document preparation, task guidance development, taskmore » monitoring, task progress information gathering and reporting to DOE, interfacing with other agencies and DOE lead programs, integrating public involvement with program efforts, and preparation of reports for DOE detailing program status. Program Analysis is performed by the JIO/RI to support identification and assessment of alternatives, and development of long-term TRU waste program capabilities. These analyses include short term analyses in response to DOE information requests, along with performing an RH Cost/Schedule Optimization report. System models will be developed, updated, and upgraded as needed to enhance JIO/RI's capability to evaluate the adequacy of program efforts in various fields. A TRU program data base will be maintained and updated to provide DOE with timely responses to inventory related questions.« less

Federal subsidies to passenger transportation

DOT National Transportation Integrated Search

2004-12-01

Recent work in the private sector and current policy debates have refocused attention on : Federal subsidies to passenger transportation modes. To provide the Department of : Transportation with an independent analysis of this issue, BTS developed da...

Experimental Approaches to Assessing the Impact of a ...

EPA Pesticide Factsheets

Symposium Paper The US EPA, as part of the CRTI project team, is currently working to assess the impacts of an urban radiological dispersion device (RDD) and develop containment and decontamination strategies.

Ambler, Pennsylvania

EPA Pesticide Factsheets

This site provides history, current information, collaborative projects, removal/remedial work in and around the Ambler area, and will serve as a forum for audiences to learn and possibly exchange ideas on asbestos research and development in the area.

Multi-d CFD Modeling of a Free-piston Stirling Convertor at NASA Glenn

NASA Technical Reports Server (NTRS)

Wilson, Scott D.; Dyson, Rodger W.; Tew, Roy C.; Ibrahim, Mounir B.

2004-01-01

A high efficiency Stirling Radioisotope Generator (SRG) is being developed for possible use in long duration space science missions. NASA s advanced technology goals for next generation Stirling convertors include increasing the Carnot efficiency and percent of Carnot efficiency. To help achieve these goals, a multidimensional Computational Fluid Dynamics (CFD) code is being developed to numerically model unsteady fluid flow and heat transfer phenomena of the oscillating working gas inside Stirling convertors. Simulations of the Stirling convertors for the SRG will help characterize the thermodynamic losses resulting from fluid flow and heat transfer between the working gas and solid walls. The current CFD simulation represents approximated 2-dimensional convertor geometry. The simulation solves the Navier Stokes equations for an ideal helium gas oscillating at low speeds. The current simulation results are discussed.

Design/analysis of the JWST ISIM bonded joints for survivability at cryogenic temperatures

NASA Astrophysics Data System (ADS)

Bartoszyk, Andrew; Johnston, John; Kaprielian, Charles; Kuhn, Jonathan; Kunt, Cengiz; Rodini, Benjamin; Young, Daniel

2005-08-01

A major design and analysis challenge for the JWST ISIM structure is thermal survivability of metal/composite adhesively bonded joints at the cryogenic temperature of 30K (-405°F). Current bonded joint concepts include internal invar plug fittings, external saddle titanium/invar fittings and composite gusset/clip joints all bonded to hybrid composite tubes (75mm square) made with M55J/954-6 and T300/954-6 prepregs. Analytical experience and design work done on metal/composite bonded joints at temperatures below that of liquid nitrogen are limited and important analysis tools, material properties, and failure criteria for composites at cryogenic temperatures are sparse in the literature. Increasing this challenge is the difficulty in testing for these required tools and properties at cryogenic temperatures. To gain confidence in analyzing and designing the ISIM joints, a comprehensive joint development test program has been planned and is currently running. The test program is designed to produce required analytical tools and develop a composite failure criterion for bonded joint strengths at cryogenic temperatures. Finite element analysis is used to design simple test coupons that simulate anticipated stress states in the flight joints; subsequently, the test results are used to correlate the analysis technique for the final design of the bonded joints. In this work, we present an overview of the analysis and test methodology, current results, and working joint designs based on developed techniques and properties.

How Effective Are Working Memory Training Interventions at Improving Maths in Schools: A Study into the Efficacy of Working Memory Training in Children Aged 9 and 10 in a Junior School?

ERIC Educational Resources Information Center

Cunningham, James; Sood, Krishan

2018-01-01

This study evaluates the validity of claims that Working Memory (WM) training is an effective and legitimate school-based maths intervention. By analysing the current developments in WM in the fields of neurology and cognitive psychology, this study seeks to analyse their relevance to the classroom. This study analyses memory profiles of children…

UTILIZATION OF ACUTE CARE NURSE PRACTITIONERS TO COMBAT PHYSICIAN SHORTAGES IN THE MILITARY TRAUMA SYSTEM: WORKING TOWARDS IMPROVED OUTCOMES

DTIC Science & Technology

2016-10-01

MILITARY TRAUMA SYSTEM: WORKING TOWARDS IMPROVED OUTCOMES by April J. Dunlevy, Maj, USAF, NC A Research Report Submitted to the Faculty In...developed to aid in efforts to provide safe , effective and efficient care. One barrier to this goal is the current national shortage of physician...healthcare system. 5 Preface I have been working in healthcare for 24 years, practicing in both civilian and military facilities

Renewable Energy Development in Hermosa Beach, California

NASA Astrophysics Data System (ADS)

Morris, K.

2016-12-01

The City of Hermosa Beach, California, with the support of the AGU's TEX program, is exploring the potential for renewable energy generation inside the City, as part of the implementation of the City's 2015 Municipal Carbon Neutral Plan. Task 1: Estimate the technical potential of existing and future technologies Given the City's characteristics, this task will identify feasible technologies: wind, solar, tidal/wave, wastewater biogas, landfill biogas, microscale anaerobic digestion (AD), and complementary energy storage. Some options may be open to the City acting alone, but others will require working with municipal partners and private entities that provide services to Hermosa Beach (e.g., wastewater treatment). Energy storage is a means to integrate intermittent renewable energy output. Task 2: Review transaction types and pathways In this task, feasible technologies will be further examined in terms of municipal ordinances and contractual paths: (a) power purchase agreements (PPAs) with developers, under which the City would purchase energy or storage services directly; (b) leases with developers, under which the City would rent sites (e.g., municipal rooftops) to developers; (c) ordinances related to permitting, under which the City would reduce regulatory barriers to entry for developers; (d) pilot projects, under which the City would engage with developers to test new technologies such as wind/wave/microscale AD (pursuant to PPAs and/or leases); and (e) existing projects, under which the City would work with current wastewater and landfill contractors to understand (i) current plans to develop renewable energy, and (ii) opportunities for the City to work with such contractors to promote renewable energy. Task 3: Estimate costs by technology Finally, the last task will gather existing information about the costs, both current and projected, of the feasible technologies, including (i) overnight construction cost (capital); (ii) integration costs (e.g., charges from Edison and energy storage); (iii) costs that may be avoided due to promotion of renewable energy; and (iv) comparisons of projected annual nominal costs (in $/MWh and net present values).

"At this point now": older workers' reflections on their current employment experiences.

PubMed

Noonan, Anne E

2005-01-01

Despite the frequently referenced graying of the U.S. workforce, we know relatively little about the work-related concerns and experiences of older workers--those aged 55+. This qualitative study addresses that gap by examining the current employment situations of a purposive sample of 37 older workers. Thematic content analysis revealed a vast diversity in the concerns and experiences of contemporary older workers, with participants being actively involved in all of the traditional stages of work-life development. Findings suggest a deepened or more nuanced view of the principal meanings of work--in particular, identity and social interaction--and highlight several negative aspects of later-life employment such as pension insecurity, unemployment, age discrimination, not having found one's "niche," and chronic interpersonal difficulties with co-workers. Findings are discussed against the backdrop of a rapidly changing workplace and dramatically shifting work-retirement trajectories in which job stability and predictable retirement are less common.

School-to-Work Transition Is Now Law. AACC Letter, Special Issue #1.

ERIC Educational Resources Information Center

Pierce, Dave

This special edition of the "AACC Letter" is part of a continuing effort by the AACC to keep community colleges current with developments related to the School-To-Work (STW) Transition legislation, which President Clinton signed into law on May 4, 1994. The newsletter begins with a summary of the AACC's efforts to influence bill language…

Center for Advanced Bioengineering for Soldier Survivability

DTIC Science & Technology

2012-06-01

Wound Care, PI Boyan; Breast Cancer Targets, PI Boyan; and Chondral Lesions, PI Boyan). We had previously awarded four targeted seed grants for...Biocompatibility of Superhydrophobic Coated Polymers for Biomedical Applications” will develop technologies for preventing biofilm formation on polymeric...dental group is currently working on a BioMASK that could use the superhydrophobic coating technology. They are also working on reducing biofilm from

Working on the Bologna Declaration: Promoting Integrated Curriculum Development and Fostering Conceptual Change

ERIC Educational Resources Information Center

Colet, Nicole Rege; Durand, Natacha

2004-01-01

This article analyses ongoing work at the University of Geneva to reform programs to fit the principles of the Bologna Declaration. Analysis of the national context addresses how Swiss universities are currently building a Swiss area of higher education along similar lines to the European Area of Higher Education. Focus is put on the role of the…

Partnerships with Cultural Organisations: A Case for Partnerships Developed by Teacher Educators for Teacher Education

ERIC Educational Resources Information Center

Lemon, Narelle; Weller, Jacolyn

2015-01-01

New ways of working in teacher education are currently being highlighted, especially in relation to partnerships. One type of partnership that is under utilised is that with cultural organisations. This paper reports on two projects where the authors work with preservice teachers in partnership with a wildlife sanctuary and a national gallery.…

From medicine to butterflies and back again

PubMed Central

Parmesan, Camille

2014-01-01

My research focuses on the current impacts of climate change on wildlife, from field-based work on butterflies to synthetic analyses of global impacts on a broad range of species across terrestrial and marine biomes. I work actively with governmental agencies and NGOs to help develop conservation assessment and planning tools aimed at preserving biodiversity in the face of climate change. PMID:27583283

The Professional Identity of Early Years Educators in England: Implications for a Transformative Approach to Continuing Professional Development

ERIC Educational Resources Information Center

Lightfoot, Sarah; Frost, David

2015-01-01

This article examines the professional identity of nine early years educators currently working in the early years sector of education in England. These educators include teachers, teaching assistants, nursery practitioners and nursery nurses working with children three to five years old in the Early Years Foundation Stage in state-maintained…

The Voice of Youths about School and Its Mark on Their Lives

ERIC Educational Resources Information Center

Pomar, Maria Isabel; Pinya, Carme

2015-01-01

The work we present is a qualitative study of the school experience and its repercussions on the current lives of ex-students from Mallorca. The work has two purposes: (a) to learn about the school's influence on the identity development of the students and (b) to incorporate the voices of former students regarding their reflection on the present…

Research Reproducibility in Geosciences: Current Landscape, Practices and Perspectives

NASA Astrophysics Data System (ADS)

Yan, An

2016-04-01

Reproducibility of research can gauge the validity of its findings. Yet currently we lack understanding of how much of a problem research reproducibility is in geosciences. We developed an online survey on faculty and graduate students in geosciences, and received 136 responses from research institutions and universities in Americas, Asia, Europe and other parts of the world. This survey examined (1) the current state of research reproducibility in geosciences by asking researchers' experiences with unsuccessful replication work, and what obstacles that lead to their replication failures; (2) the current reproducibility practices in community by asking what efforts researchers made to try to reproduce other's work and make their own work reproducible, and what the underlying factors that contribute to irreproducibility are; (3) the perspectives on reproducibility by collecting researcher's thoughts and opinions on this issue. The survey result indicated that nearly 80% of respondents who had ever reproduced a published study had failed at least one time in reproducing. Only one third of the respondents received helpful feedbacks when they contacted the authors of a published study for data, code, or other information. The primary factors that lead to unsuccessful replication attempts are insufficient details of instructions in published literature, and inaccessibility of data, code and tools needed in the study. Our findings suggest a remarkable lack of research reproducibility in geoscience. Changing the incentive mechanism in academia, as well as developing policies and tools that facilitate open data and code sharing are the promising ways for geosciences community to alleviate this reproducibility problem.

Magnetic Suspension Technology Development

NASA Technical Reports Server (NTRS)

Britcher, Colin

1998-01-01

This Cooperative Agreement, intended to support focused research efforts in the area of magnetic suspension systems, was initiated between NASA Langley Research Center (LaRC) and Old Dominion University (ODU) starting January 1, 1997. The original proposal called for a three-year effort, but funding for the second year proved to be unavailable, leading to termination of the agreement following a 5-month no-cost extension. This report covers work completed during the entire 17-month period of the award. This research built on work that had taken place over recent years involving both NASA LARC and the Principal Investigator (PI). The research was of a rather fundamental nature, although specific applications were kept in mind at all times, such as wind tunnel Magnetic Suspension and Balance Systems (MSBS), space payload pointing and vibration isolation systems, magnetic bearings for unconventional applications, magnetically levitated ground transportation and electromagnetic launch systems. Fundamental work was undertaken in areas such as the development of optimized magnetic configurations, analysis and modelling of eddy current effects, control strategies for magnetically levitated wind tunnel models and system calibration procedures. Despite the termination of this Cooperative Agreement, several aspects of the research work are currently continuing with alternative forms of support.

International Space Station Evolution Data Book. Volume 1; Baseline Design; Revised

NASA Technical Reports Server (NTRS)

Jorgensen, Catherine A. (Editor); Antol, Jeffrey (Technical Monitor)

2000-01-01

The International Space Station (ISS) will provide an Earth-orbiting facility that will accommodate engineering experiments as well as research in a microgravity environment for life and natural sciences. The ISS will distribute resource utilities and support permanent human habitation for conducting this research and experimentation in a safe and habitable environment. The objectives of the ISS program are to develop a world-class, international orbiting laboratory for conducting high-value scientific research for the benefit of humans on Earth; to provide access to the microgravity environment; to develop the ability to live and work in space for extended periods; and to provide a research test bed for developing advanced technology for human and robotic exploration of space. The current design and development of the ISS has been achieved through the outstanding efforts of many talented engineers, designers, technicians, and support personnel who have dedicated their time and hard work to producing a state-of-the-art Space Station. Despite these efforts, the current design of the ISS has limitations that have resulted from cost and technology issues. Regardless, the ISS must evolve during its operational lifetime to respond to changing user needs and long-term national and international goals. As technologies develop and user needs change, the ISS will be modified to meet these demands. The design and development of these modifications should begin now to prevent a significant lapse in time between the baseline design and the realization of future opportunities. For this effort to begin, an understanding of the baseline systems and current available opportunities for utilization needs to be achieved. Volume I of this document provides the consolidated overview of the ISS baseline systems. It also provides information on the current facilities available for pressurized and unpressurized payloads. Information on current plans for crew availability and utilization; resource timelines and margin summaries including power, thermal, and storage volumes; and an overview of the ISS cargo traffic and the vehicle traffic model is also included.

HISTORY OF SUNLIGHT EXPOSURE IS A RISK FACTOR FOR AGE-RELATED MACULAR DEGENERATION.

PubMed

Schick, Tina; Ersoy, Lebriz; Lechanteur, Yara T E; Saksens, Nicole T M; Hoyng, Carel B; den Hollander, Anneke I; Kirchhof, Bernd; Fauser, Sascha

2016-04-01

To evaluate effects of current and past sunlight exposure and iris color on early and late age-related macular degeneration (AMD). Of 3,701 individuals from the EUGENDA database, 752 (20.3%) showed early AMD, 1,179 (31.9%) late AMD, and 1,770 (47.8%) were controls. Information about current and past sunlight exposure, former occupation type, subdivided in indoor working and outdoor working, and iris color were obtained by standardized interviewer-assisted questionnaires. Associations between environmental factors adjusted for age, gender, and smoking and early and late AMD were performed by multivariate regression analysis. Current sunlight exposure showed no association with early AMD or late AMD, but past sunlight exposure (≥8 hours outside daily) was significantly associated with early AMD (odds ratio: 5.54, 95% confidence interval 1.25-24.58, P = 0.02) and late AMD (odds ratio: 2.77, 95% confidence interval 1.25-6.16, P = 0.01). Outside working was found to be associated with late AMD (odds ratio: 2.57, 95% confidence interval 1.89-3.48, P = 1.58 × 10). No association was observed between iris color and early or late AMD. Sunlight exposure during working life is an important risk factor for AMD, whereas sunlight exposure after retirement seems to have less influence on the disease development. Therefore, preventive measures, for example, wearing sunglasses to minimize sunlight exposure, should start early to prevent development of AMD later in life.

Human-Automation Integration: Principle and Method for Design and Evaluation

NASA Technical Reports Server (NTRS)

Billman, Dorrit; Feary, Michael

2012-01-01

Future space missions will increasingly depend on integration of complex engineered systems with their human operators. It is important to ensure that the systems that are designed and developed do a good job of supporting the needs of the work domain. Our research investigates methods for needs analysis. We included analysis of work products (plans for regulation of the space station) as well as work processes (tasks using current software), in a case study of Attitude Determination and Control Officers (ADCO) planning work. This allows comparing how well different designs match the structure of the work to be supported. Redesigned planning software that better matches the structure of work was developed and experimentally assessed. The new prototype enabled substantially faster and more accurate performance in plan revision tasks. This success suggests the approach to needs assessment and use in design and evaluation is promising, and merits investigatation in future research.

The Climate Services Partnership (CSP): Working Together to Improve Climate Services Worldwide

NASA Astrophysics Data System (ADS)

Zebiak, S.; Brasseur, G.; Members of the CSP Coordinating Group

2012-04-01

Throughout the world, climate services are required to address urgent needs for climate-informed decision-making, policy and planning. These needs were explored in detail at the first International Conference on Climate Services (ICCS), held in New York in October 2011. After lengthy discussions of needs and capabilities, the conference culminated in the creation of the Climate Services Partnership (CSP). The CSP is an informal interdisciplinary network of climate information users, providers, donors and researchers interested in improving the provision and development of climate services worldwide. Members of the Climate Services Partnership work together to share knowledge, accelerate learning, develop new capacities, and establish good practices. These collaborative efforts will inform and support the evolution and implementation of the Global Framework for Climate Services. The Climate Services Partnership focuses its efforts on three levels. These include: 1. encouraging and sustaining connections between climate information providers, users, donors, and researchers 2. gathering, synthesizing and disseminating current knowledge on climate services by way of an online knowledge management platform 3. generating new knowledge on critical topics in climate service development and provision, through the creation of focused working groups on specific topics To date, the Climate Services Partnership has made progress on all three fronts. Connections have been fostered through outreach at major international conferences and professional societies. The CSP also maintains a website and a monthly newsletter, which serves as a resource for those interested in climate services. The second International Conference on Climate Services (ICCS2) will be held in Berlin in September. The CSP has also created a knowledge capture system that gathers and disseminates a wide range of information related to the development and provision of climate services. This includes an online-searchable database that allows users to see what climate services activities are underway in what locations, to gather and analyze information. As part of the knowledge capture system, more than 10 CSP members are currently developing case studies to describe specific climate services activities; in a few cases, this involves in-depth evaluations of the service in question. Finally, the Economics Working Group of the Climate Services Partnership is analyzing previous methods to economically value climate services in hopes of generating knew knowledge regarding the methods are best suited to assessing the benefits associated with various climate services. Other groups are working to develop guidance materials for the development and use of climate information to support decision and policy-making. The Climate Services Partnership is an open, informal network that builds on activities that are already underway and works to create synergies to improve the provision and development for climate services. Its members currently number more than 50 organizations; it seeks new participants and new initiatives.

Evaluation of a Web-Based Professional Development Program (Project ACE) for Teachers of Children with Autism Spectrum Disorders

ERIC Educational Resources Information Center

Rakap, Salih; Jones, Hazel A.; Emery, Alice Kaye

2015-01-01

This article describes the development, implementation, and second-year evaluation of Project Autism Competencies for Endorsement (ACE), a web-based professional development (PD) program that is designed to train teachers currently working in the field to meet the unique and diverse needs of children with autism spectrum disorders (ASDs). A…

DAS photonics developments for analogue and digital photonic links for intra-satellite communications

NASA Astrophysics Data System (ADS)

Blasco, Julián.; Rico, Eloy; Genovard, Pablo; Sáez, Cristina; Navasquillo, Olga; Martí, Javier

2017-11-01

During past years, special efforts have been invested to develop optical links, both digital and analogue, for space applications, such as reference signal distribution or digital communication cables. The aim of this paper is to present the current DAS developments for these applications as well as future work to increase TRL levels and flight opportunities.

Export Control Requirements for Tritium Processing Design and R&D

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hollis, William Kirk; Maynard, Sarah-Jane Wadsworth

This document will address requirements of export control associated with tritium plant design and processes. Los Alamos National Laboratory has been working in the area of tritium plant system design and research and development (R&D) since the early 1970’s at the Tritium Systems Test Assembly (TSTA). This work has continued to the current date with projects associated with the ITER project and other Office of Science Fusion Energy Science (OS-FES) funded programs. ITER is currently the highest funding area for the DOE OS-FES. Although export control issues have been integrated into these projects in the past a general guidance documentmore » has not been available for reference in this area. To address concerns with currently funded tritium plant programs and assist future projects for FES, this document will identify the key reference documents and specific sections within related to tritium research. Guidance as to the application of these sections will be discussed with specific detail to publications and work with foreign nationals.« less

Export Control Requirements for Tritium Processing Design and R&D

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hollis, William Kirk; Maynard, Sarah-Jane Wadsworth

2015-10-30

This document will address requirements of export control associated with tritium plant design and processes. Los Alamos National Laboratory has been working in the area of tritium plant system design and research and development (R&D) since the early 1970’s at the Tritium Systems Test Assembly (TSTA). This work has continued to the current date with projects associated with the ITER project and other Office of Science Fusion Energy Science (OS-FES) funded programs. ITER is currently the highest funding area for the DOE OS-FES. Although export control issues have been integrated into these projects in the past a general guidance documentmore » has not been available for reference in this area. To address concerns with currently funded tritium plant programs and assist future projects for FES, this document will identify the key reference documents and specific sections within related to tritium research. Guidance as to the application of these sections will be discussed with specific detail to publications and work with foreign nationals.« less

A climate-compatible approach to development practice by international humanitarian NGOs.

PubMed

Clarke, Matthew; de Cruz, Ian

2015-01-01

If current climate-change predictions prove accurate, non-linear change, including potentially catastrophic change, is possible and the environments in which international humanitarian NGOs operate will change figuratively and literally. This paper proposes that a new approach to development is required that takes changing climate into account. This 'climate-compatible approach' to development is a bleak shift from some of the current orthodox positions and will be a major challenge to international humanitarian NGOs working with the most vulnerable. However, it is necessary to address the challenges and context such NGOs face, and the need to be resilient and adaptive to these changes. © 2014 The Author(s). Disasters © Overseas Development Institute, 2014.

Fast steering mirror for laser communication

NASA Astrophysics Data System (ADS)

Langenbach, Harald; Schmid, Manfred

2005-07-01

Future multimedia satellites require communication at large bandwidth which can be achieved by means of optical communication links. TESAT Spacecom is currently developing a Laser Communication Terminal (LCT) for such applications under DLR contract. EADS Astrium is developing and building the mechanisms for Pointing, Acquisition and Tracking (PAT) of the laser beam between two Laser Communication Terminals. Based on this development work the development of mechanism H/W to be flown on TerraSar X is currently under way. After a short description of the general arrangement of the Mechanisms inside the LCT, the paper describes the design of the fast steering mirrors (FSM) reflecting the critical requirements and the solutions how to achieve them.

The impact of reduced working hours on surgical training in Australia and New Zealand.

PubMed

Gough, Ian R

2011-01-01

There is a worldwide trend for reduced working hours for doctors, particularly in the developed western countries. This has been led by the introduction of the European Working Time Directive (EWTD) that has had a significant impact on work patterns and training. Australia currently has a more flexible working environment but this is changing. In New Zealand there is a contract for resident doctors defining a maximum 72 h of rostered work per week. Copyright © 2010 Royal College of Surgeons of Edinburgh (Scottish charity number SC005317) and Royal College of Surgeons in Ireland. Published by Elsevier Ltd. All rights reserved.

Workshop on Countering Space Adaptation with Exercise: Current Issues

NASA Technical Reports Server (NTRS)

Harris, Bernard A. (Editor); Siconolfi, Steven F. (Editor)

1994-01-01

The proceedings represent an update to the problems associated with living and working in space and the possible impact exercise would have on helping reduce risk. The meeting provided a forum for discussions and debates on contemporary issues in exercise science and medicine as they relate to manned space flight with outside investigators. This meeting also afforded an opportunity to introduce the current status of the Exercise Countermeasures Project (ECP) science investigations and inflight hardware and software development. In addition, techniques for physiological monitoring and the development of various microgravity countermeasures were discussed.

3D simulation as a tool for improving the safety culture during remediation work at Andreeva Bay.

PubMed

Chizhov, K; Sneve, M K; Szőke, I; Mazur, I; Mark, N K; Kudrin, I; Shandala, N; Simakov, A; Smith, G M; Krasnoschekov, A; Kosnikov, A; Kemsky, I; Kryuchkov, V

2014-12-01

Andreeva Bay in northwest Russia hosts one of the former coastal technical bases of the Northern Fleet. Currently, this base is designated as the Andreeva Bay branch of Northwest Center for Radioactive Waste Management (SevRAO) and is a site of temporary storage (STS) for spent nuclear fuel (SNF) and other radiological waste generated during the operation and decommissioning of nuclear submarines and ships. According to an integrated expert evaluation, this site is the most dangerous nuclear facility in northwest Russia. Environmental rehabilitation of the site is currently in progress and is supported by strong international collaboration. This paper describes how the optimization principle (ALARA) has been adopted during the planning of remediation work at the Andreeva Bay STS and how Russian-Norwegian collaboration greatly contributed to ensuring the development and maintenance of a high level safety culture during this process. More specifically, this paper describes how integration of a system, specifically designed for improving the radiological safety of workers during the remediation work at Andreeva Bay, was developed in Russia. It also outlines the 3D radiological simulation and virtual reality based systems developed in Norway that have greatly facilitated effective implementation of the ALARA principle, through supporting radiological characterisation, work planning and optimization, decision making, communication between teams and with the authorities and training of field operators.

Space station contamination control study: Internal combustion, phase 1

NASA Technical Reports Server (NTRS)

Ruggeri, Robert T.

1987-01-01

Contamination inside Space Station modules was studied to determine the best methods of controlling contamination. The work was conducted in five tasks that identified existing contamination control requirements, analyzed contamination levels, developed outgassing specification for materials, wrote a contamination control plan, and evaluated current materials of offgassing tests used by NASA. It is concluded that current contamination control methods can be made to function on the Space Station for up to 1000 days, but that current methods are deficient for periods longer than about 1000 days.

Presynaptic miniature GABAergic currents in developing interneurons.

PubMed

Trigo, Federico F; Bouhours, Brice; Rostaing, Philippe; Papageorgiou, George; Corrie, John E T; Triller, Antoine; Ogden, David; Marty, Alain

2010-04-29

Miniature synaptic currents have long been known to represent random transmitter release under resting conditions, but much remains to be learned about their nature and function in central synapses. In this work, we describe a new class of miniature currents ("preminis") that arise by the autocrine activation of axonal receptors following random vesicular release. Preminis are prominent in gabaergic synapses made by cerebellar interneurons during the development of the molecular layer. Unlike ordinary miniature postsynaptic currents in the same cells, premini frequencies are strongly enhanced by subthreshold depolarization, suggesting that the membrane depolarization they produce belongs to a feedback loop regulating neurotransmitter release. Thus, preminis could guide the formation of the interneuron network by enhancing neurotransmitter release at recently formed synaptic contacts. Copyright 2010 Elsevier Inc. All rights reserved.

Spatial working memory capacity predicts bias in estimates of location.

PubMed

Crawford, L Elizabeth; Landy, David; Salthouse, Timothy A

2016-09-01

Spatial memory research has attributed systematic bias in location estimates to a combination of a noisy memory trace with a prior structure that people impose on the space. Little is known about intraindividual stability and interindividual variation in these patterns of bias. In the current work, we align recent empirical and theoretical work on working memory capacity limits and spatial memory bias to generate the prediction that those with lower working memory capacity will show greater bias in memory of the location of a single item. Reanalyzing data from a large study of cognitive aging, we find support for this prediction. Fitting separate models to individuals' data revealed a surprising variety of strategies. Some were consistent with Bayesian models of spatial category use, however roughly half of participants biased estimates outward in a way not predicted by current models and others seemed to combine these strategies. These analyses highlight the importance of studying individuals when developing general models of cognition. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

Spatial Working Memory Capacity Predicts Bias in Estimates of Location

PubMed Central

Crawford, L. Elizabeth; Landy, David H.; Salthouse, Timothy A.

2016-01-01

Spatial memory research has attributed systematic bias in location estimates to a combination of a noisy memory trace with a prior structure that people impose on the space. Little is known about intra-individual stability and inter-individual variation in these patterns of bias. In the current work we align recent empirical and theoretical work on working memory capacity limits and spatial memory bias to generate the prediction that those with lower working memory capacity will show greater bias in memory of the location of a single item. Reanalyzing data from a large study of cognitive aging, we find support for this prediction. Fitting separate models to individuals’ data revealed a surprising variety of strategies. Some were consistent with Bayesian models of spatial category use, however roughly half of participants biased estimates outward in a way not predicted by current models and others seemed to combine these strategies. These analyses highlight the importance of studying individuals when developing general models of cognition. PMID:26900708

FBI fingerprint identification automation study: AIDS 3 evaluation report. Volume 6: Environmental analysis

NASA Technical Reports Server (NTRS)

Mulhall, B. D. L.

1980-01-01

The results of the analysis of the external environment of the FBI Fingerprint Identification Division are presented. Possible trends in the future environment of the Division that may have an effect on the work load were projected to determine if future work load will lie within the capability range of the proposed new system, AIDS 3. Two working models of the environment were developed, the internal and external model, and from these scenarios the projection of possible future work load volume and mixture was developed. Possible drivers of work load change were identified and assessed for upper and lower bounds of effects. Data used for the study were derived from historical information, analysis of the current situation and from interviews with various agencies who are users of or stakeholders in the present system.

The Medical Gopher — A Microcomputer Based Physician Work Station

PubMed Central

McDonald, Clement J.

1984-01-01

We've developed a microcomputer medical work station intended to reduce the physician's “gopher” work of fetching, reviewing, organizing and writing that consumes his day. The system requires extensive physician interaction; so we have developed a fast and consistent menu-oriented user interface. It provides facilities for entering prescriptions, orders, problems and other medical record information and for generating flowsheets, executing reminder rules, providing ad hoc retrievals and reporting facts about drugs, tests and differential diagnoses. Each work station is connected to a central server (currently a VAX 117/80) in a network configuration, but carries all of its own programs, tables and medical records for a few hundred patients, locally. This system is tested but not yet tried. Questions remain about physician's acceptance and the true usefullness of such a work station.

Automated platform for designing multiple robot work cells

NASA Astrophysics Data System (ADS)

Osman, N. S.; Rahman, M. A. A.; Rahman, A. A. Abdul; Kamsani, S. H.; Bali Mohamad, B. M.; Mohamad, E.; Zaini, Z. A.; Rahman, M. F. Ab; Mohamad Hatta, M. N. H.

2017-06-01

Designing the multiple robot work cells is very knowledge-intensive, intricate, and time-consuming process. This paper elaborates the development process of a computer-aided design program for generating the multiple robot work cells which offer a user-friendly interface. The primary purpose of this work is to provide a fast and easy platform for less cost and human involvement with minimum trial and errors adjustments. The automated platform is constructed based on the variant-shaped configuration concept with its mathematical model. A robot work cell layout, system components, and construction procedure of the automated platform are discussed in this paper where integration of these items will be able to automatically provide the optimum robot work cell design according to the information set by the user. This system is implemented on top of CATIA V5 software and utilises its Part Design, Assembly Design, and Macro tool. The current outcomes of this work provide a basis for future investigation in developing a flexible configuration system for the multiple robot work cells.

Development and initial evaluation of an enhanced measure of boundary flexibility for the work and family domains.

PubMed

Matthews, Russell A; Barnes-Farrell, Janet L

2010-07-01

This manuscript reports the development of a measure of work and family domain boundary flexibility. Building on previous research, we propose an expanded definition of boundary flexibility that includes two components-flexibility-ability and flexibility-willingness-and we develop a measure designed to capture this more comprehensive definition of boundary flexibility. Flexibility-ability is conceptualized as an individual's perception of personal and situational constraints that affect boundary management, and flexibility-willingness is conceptualized as an individual difference variable that captures the motivation to engage in boundary flexing. An additional feature of domain boundaries, permeability, is also examined. Data are presented from two studies. Study 1 (N = 244) describes the development of a multiscale measure that extends current conceptual definitions of boundary flexibility. Study 2 (N = 225) describes the refinement and evaluation of this measure. Confirmatory factor analysis, reliability evidence, interscale correlations, and correlations with important work-family constructs (e.g., domain centrality, work-family conflict) provide initial construct validity evidence for the measure.

Moonshot Panel Moving Toward Final Report

Cancer.gov

An NCI Cancer Currents blog from acting NCI Director Dr. Doug Lowy providing an update on the activities of the National Cancer Moonshot Initiative’s Blue Ribbon Panel and its work to develop a final report.

Laura Jackson, Ph.D.

EPA Pesticide Factsheets

Research Biologist with the EPA. Her current work involves linking natural and built infrastructure to human health and well-being at multiple spatial scales, in order to develop interpretive maps and analytical tools for an interactive, web-based Atlas.

THE LAND - PHARM POLLUTION: HORMONES AND ...

EPA Pesticide Factsheets

The Society Of Environmental Journalists (SEJ, web page at http://www.sej.org/) comprises members who are working journalists who want news and a background on developing topics. The SEJ (currently with over 1,200 members) was

TESSX: A Mission for Space Exploration with Tethers

NASA Technical Reports Server (NTRS)

Cosmo, Mario L.; Lorenzini, Enrico C.; Gramer, Daniel J.; Hoffman, John H.; Mazzoleni, Andre P.

2005-01-01

Tethers offer significant potential for substantially increasing payload mass fraction, increasing spacecraft lifetime, enhancing long-term space travel, and enabling the understanding and development of gravity-dependent technologies required for Moon and Mars exploration. The development of the Tether Electrodynamic Spin-up and Survivability Experiment (TESSX) will support applications relevant to NASA's new exploration initiative, including: artificial gravity generation, formation flying, electrodynamic propulsion, momentum exchange, and multi-amp current collection and emission. Under the broad term TESSX, we are currently evaluating several different tether system configurations and operational modes. The initial results of this work are presented, including hardware development, orbital dynamics simulations, and electrodynamics design and analysis.

Fiber-optic sensors for aerospace electrical measurements: An update

NASA Technical Reports Server (NTRS)

Patterson, Richard L.; Rose, A. H.; Tang, D.; Day, G. W.

1991-01-01

Fiber-optic sensors are being developed for electrical current, voltage, and power measurements in aerospace applications. These sensors are presently designed to cover ac frequencies from 60 Hz to 20 kHz. The current sensor, based on the Faraday effect in optical fiber, is in advanced development after some initial testing. Concentration is on packaging methods and ways to maintain consistent sensitivity with changes in temperature. The voltage sensor, utilizing the Pockels effect in a crystal, has excelled in temperature tests. This paper reports on the development of these sensors, the results of evaluation, improvements now in progress, and the future direction of the work.

Conservation in Physics Teaching, History of Science and in Child Development

NASA Astrophysics Data System (ADS)

Speltini, Cristina; Dibar Ure, María Celia

The current work is an exploratory study on the ideas thatstudents in their fourth semester of engineering have about ``conservation''. Wereview the Piagetian position on the importance of conservations in logical operational structures inchild development and we comment upon other current trends in cognitive psychology. We discussbriefly the development of conservations in science during the 17th, 18th and 19th centuries and we pointout the contrast between this and how most textbooks introduce this subject. We have also carried out afirst, tentative analysis of the answers given by a sample of these students to a brief questionnaire about``conservation'' and ``non-conservation''.

Silicon Carbide Monofilament Reinforced Titanium Composites For Space Structures: A New Material Option

NASA Astrophysics Data System (ADS)

Kyle-Henney, Stephen; Flitcroft, Stephen; Shatwell, Robert; Gibbon, David; Voss, Gary; Harkness, Patrick

2012-07-01

Silicon carbide fibre reinforced titanium composite material has been in development since the 1980s initially for high temperature structures on hypersonic vehicles (HOTOL, NASP). Since then development has focused on military and civil aircraft. Development in the European Union has reached a level of maturity where it is again being considered for space applications. Current activities include pressure vessels and studies for launch vehicles and satellite applications. The paper provides background to the technology key performance characteristics current application work and future activities. The renewed interest in hypersonic vehicles has also picked up on the potential for lightweight metallic composites.

What Schools Are Doing around Career Development: Implications for Policy and Practice

ERIC Educational Resources Information Center

Perry, Justin C.; Wallace, Eric W.

2012-01-01

This article describes the role that schools are playing in supporting career development for young people. It examines the history of career-related programming in schools, including school-to-work programs, career and technical education, the college and career readiness movement, and current school reform initiatives. This understanding of…

Are Interpersonal Relationships Necessary for Developing Trust in Online Group Projects?

ERIC Educational Resources Information Center

Wade, Christine E.; Cameron, Bruce A.; Morgan, Kari; Williams, Karen C.

2011-01-01

Trust between group members has been suggested as an important part of small group work in online classrooms. Developing interpersonal relationships with group members may promote a sense of trust among them; however, research shows mixed results. The current study explored how students' perceptions of the importance of interpersonal relationships…

Development and evaluation of the bacterial fate and transport module for the agricultural policy/environmental extender (APEX) model

USDA-ARS?s Scientific Manuscript database

The Agricultural Policy/Environmental eXtender (APEX) is a watershed-scale water quality model that includes detailed representation of agricultural management but currently does not have microbial fate and transport simulation capabilities. The objective of this work was to develop a process-based ...

Learning from Experience--How Development Projects Spread "Good Practice" in Britain.

ERIC Educational Resources Information Center

Clynes, Roger

1992-01-01

Architects and Buildings Branch (A&B) of Department of Education in London, England, is specifically responsible for design and management of educational facilities. Current development project provides example of emphasis, aims, methods of work, and outcome of a typical project. Fact file on British public schools and list of type of reports…

New developments in operator protection for forest machines

Treesearch

Robert B. Rummer; S. Taylor; M. Veal

2003-01-01

Mechanization of forest operations ha greatly improved saftey of woods work. However, increasing use of machines has introduced new hazards that must be addressed. Two of these hazards are rollover of swing-type forestry machines (currently excluded from standard protection) and the hazard of thrown objects from cutting devices. Ongoing research projects are developing...

Employability and Higher Education: Contextualising Female Students' Workplace Experiences to Enhance Understanding of Employability Development

ERIC Educational Resources Information Center

Gracia, Louise

2009-01-01

Current political and economic discourses position employability as a responsibility of higher education, which deploys mechanisms such as supervised work experience (SWE) to embed employability skills development into the undergraduate curriculum. However, workplaces are socially constructed complex arenas of embodied knowledge that are gendered.…

Triangulating Teacher Perception, Classroom Observations, and Student Work to Evaluate Secondary Writing Programs

ERIC Educational Resources Information Center

Henderson, Daphne Carr; Rupley, William H.; Nichols, Janet Alys; Nichols, William Dee; Rasinski, Timothy V.

2018-01-01

Current professional development efforts in writing at the secondary level have not resulted in student improvement on large-scale writing assessments. To maximize funding resources and instructional time, school leaders need a way to determine professional development content for writing teachers that aligns with specific student outcomes. The…

Utilizing a Substance Use Attitudes, Practices and Knowledge Survey for Multidisciplinary Curriculum Development

ERIC Educational Resources Information Center

Alexander, Dale; Waters, Vicki; McQueen, Katie; Basinger, Scott

2006-01-01

The authors describe the development and administration of a substance use attitudes questionnaire to social work students and clinicians, physician assistant students and practitioners, and medical interns. The general purpose for the Attitudes Survey was to collect baseline data regarding past training, current attitudes, beliefs, practices, and…

Acquisition of Scientific Literature in Developing Countries. 5: Arab Gulf Countries.

ERIC Educational Resources Information Center

Ali, S. Nazim

1989-01-01

Summarizes the development of science and technology in the Arab Gulf States and discusses the collection building of the libraries in the region, focusing on problems of censorship and finance. Current purchasing methods are described, and the need for automation in acquisitions work and for centralized and cooperative purchasing is discussed.…

A Research Agenda for Online Teacher Professional Development

ERIC Educational Resources Information Center

Dede, Chris; Ketelhut, Diane Jass; Whitehouse, Pamela; Breit, Lisa; McCloskey, Erin M.

2009-01-01

This article highlights key online teacher professional development (oTPD) areas in need of research based on a review of current oTPD research conducted in conjunction with an oTPD conference held at Harvard University in fall 2005. The literature review of this field documents much work that is anecdotal, describing professional development…

JGOMAS: New Approach to AI Teaching

ERIC Educational Resources Information Center

Barella, A.; Valero, S.; Carrascosa, C.

2009-01-01

This paper presents a new environment for teaching practical work in AI subjects. The main purpose of this environment is to make AI techniques more appealing to students and to facilitate the use of the toolkits which are currently widely used in research and development. This new environment has a toolkit for developing and executing agents,…

A GRE Test for the STEM Disciplines: Developing an Assessment "of" and "for" Learning

ERIC Educational Resources Information Center

Payne, David G.; Briel, Jacqueline B.; Hawthorn, John; Riedeburg, Karen

2006-01-01

Plans are described for creating a Graduate Record Examination (GRE) test for the STEM (science, technology, engineering, and mathematics) disciplines. Previous work showed that a quantitative measure for the STEM disciplines exacerbated group differences beyond those reflected in the current GRE General Test. A test development approach is…

Front-loading urban stormwater management for success – a perspective incorporating current studies on the implementation of retrofit low-impact development

EPA Science Inventory

Recent work into the implementation of low-impact development and green infrastructure suggests that a decentralized, source-control approach has the potential to significantly reduce urban stormwater runoff quantity. We posit that the factors of increasing public participation i...

A Historical and Contextual Look at Education and Workforce Development. Working Paper WP/05-02

ERIC Educational Resources Information Center

California Postsecondary Education Commission, 2005

2005-01-01

The California Postsecondary Education Commission is currently producing a series of policy briefs examining the nexus between workforce development and postsecondary education. The research question "How does California's postsecondary education system contribute to the needs of the state's economy and its future?" will serve as the…

Unifying Psychology and Experiential Education: Toward an Integrated Understanding of "Why" It Works

ERIC Educational Resources Information Center

Houge Mackenzie, Susan; Son, Julie S.; Hollenhorst, Steve

2014-01-01

This article examines the significance of psychology to experiential education (EE) and critiques EE models that have developed in isolation from larger psychological theories and developments. Following a review of literature and current issues, select areas of psychology are explored with reference to experiential learning processes. The state…

Understanding the Development of School Psychology in Mainland China

ERIC Educational Resources Information Center

D'Amato, Rik Carl; van Schalkwyk, Gertina J.; Zhao, B. Yang; Hu, Juan

2013-01-01

School psychology is an important area within psychology, which has a short developmental history in Mainland China. Nonetheless, along with economic advances and social changes in Mainland China, school psychology is developing and becoming more important. Currently, people need to work harder and longer. This places many under pressure that may…

The Implementation of Sustainability Practices in Portuguese Higher Education Institutions

ERIC Educational Resources Information Center

Aleixo, Ana Marta; Azeiteiro, Ulisses; Leal, Susana

2018-01-01

Purpose: The purpose of this work is to analyze the current state of implementation of sustainability development (SD) in Portuguese higher education institutions (HEIs). Design/methodology/approach: A questionnaire was developed to measure the level of implementation of SD practices in HEIs as well as the number of rankings, certifications and…

Design and Development of a Cross-Cultural Disposition Inventory

ERIC Educational Resources Information Center

Davies, Randall; Zaugg, Holt; Tateishi, Isaku

2015-01-01

Advances in technology have increased the likelihood that engineers will have to work in a global, culturally diverse setting. Many schools of engineering are currently revising their curricula to help students to develop cultural competence. However, our ability to measure cultural dispositions can be a challenge. The purpose of this project was…

A Theoretical Model of Children's Storytelling Using Physically-Oriented Technologies (SPOT)

ERIC Educational Resources Information Center

Guha, Mona Leigh; Druin, Allison; Montemayor, Jaime; Chipman, Gene; Farber, Allison

2007-01-01

This paper develops a model of children's storytelling using Physically-Oriented Technology (SPOT). The SPOT model draws upon literature regarding current physical storytelling technologies and was developed using a grounded theory approach to qualitative research. This empirical work focused on the experiences of 18 children, ages 5-6, who worked…

Learning from Japanese Approach to Teachers' Professional Development: Can "Jugyou Kenkyu" Work in Other Countries?

ERIC Educational Resources Information Center

Masami, Matoba; Reza, Sarkar Arani M.

2005-01-01

This paper tries to present a careful analysis of current trends and challenges to importing Japanese model of teachers' professional development. The objective is to examine what "we" can learn from Japanese approach to improving instruction, especially "Jugyou Kenkyu" (Lesson Study) as a collaborative research on the…

Appraising forensic anthropology in the Philippines: Current status and future directions.

PubMed

Go, Matthew C

2018-07-01

The increasing significance of forensic anthropology in the 21st century, yet unequitable worldwide distribution of expertise, necessitates a stocktaking of the discipline on a local scale. The purpose of this work is to appraise the current state of forensic anthropology in the Philippines and provide the rationale for its further development within the country. Recent efforts in research, education, and legislation that seek to boost Philippine forensic anthropology specifically and forensic sciences generally are highlighted. Furthermore, this work hopes to serve as a springboard for future students, scholars, and practitioners seeking to advance the field in the Philippines. Copyright © 2018 Elsevier B.V. All rights reserved.

A Thermal Model for Carbon Nanotube Interconnects

PubMed Central

Mohsin, Kaji Muhammad; Srivastava, Ashok; Sharma, Ashwani K.; Mayberry, Clay

2013-01-01

In this work, we have studied Joule heating in carbon nanotube based very large scale integration (VLSI) interconnects and incorporated Joule heating influenced scattering in our previously developed current transport model. The theoretical model explains breakdown in carbon nanotube resistance which limits the current density. We have also studied scattering parameters of carbon nanotube (CNT) interconnects and compared with the earlier work. For 1 µm length single-wall carbon nanotube, 3 dB frequency in S12 parameter reduces to ~120 GHz from 1 THz considering Joule heating. It has been found that bias voltage has little effect on scattering parameters, while length has very strong effect on scattering parameters. PMID:28348333

Development of a multihospital pharmacy quality assurance program.

PubMed

Hoffmann, R P; Ravin, R; Colaluca, D M; Gifford, R; Grimes, D; Grzegorczyk, R; Keown, F; Kuhr, F; McKay, R; Peyser, J; Ryan, R; Zalewski, C

1980-07-01

Seven community hospitals have worked cooperatively for 18 months to develop an initial hospital pharmacy quality assurance program. Auditing criteria were developed for nine service areas corresponding to the model program developed by the American Society of Hospital Pharmacists. Current plans are to implement and modify this program as required at each participating hospital. Follow-up programs will also be essential to a functional, ongoing program, and these will be developed in the future.

Family Registration Card as electronic medical carrier in Bosnia and Herzegovina.

PubMed

Novo, Ahmed; Masic, Izet; Toromanovic, Selim; Loncarevic, Nedim; Junuzovic, Dzelaludin; Dizdarevic, Jadranka

2004-01-01

Medical documentation is a very important part of the medical documentalistics and is occupies a large part of daily work of medical staff working in Primary Health Care. Paper documentation is going to be replaced by electronic cards in Bosnia and Herzegovina and a new Health Care System is under development, based on an Electronic Family Registration Card. Developed countries proceeded from the manual and semiautomatic method of medical data processing to the new method of entering, storage, transferring, searching and protecting data, using electronic equipment. Currently, many European countries have developed a Medical Card Based Electronic Information System. Three types of electronic card are currently in use: a Hybrid Card, a Smart Card and a Laser Card. The dilemma is which card should be used as a data carrier. The Electronic Family Registration Cared is a question of strategic interest for B&H, but also a great investment. We should avoid the errors of other countries that have been developing card-based system. In this article we present all mentioned cards and compare advantages and disadvantages of different technologies.

New irradiation facilities for development of production methods of medical radionuclides at cyclotrons at Forschungszentrum Jülich

NASA Astrophysics Data System (ADS)

Spellerberg, S.; Scholten, B.; Spahn, I.; Felden, O.; Gebel, R.; Qaim, S. M.; Bai, M.; Neumaier, B.

2017-05-01

An essential basis for research and development work on radiopharmaceuticals is the efficient production of radionuclides of high quality. In this process research-oriented studies aiming for elucidation of biochemical processes require novel products. The radionuclide development at INM-5 entails basic research, e.g. the determination of nuclear reaction data, as well as technical aspects of practical production, such as high-current targetry, chemical separation, formulation and quality control. In this work developments, adaptation and optimization of irradiation facilities at the BC 1710, JULIC as Injector of COSY and COSY itself are summarized, which shall allow the extension of radionuclide production possibilities, aiming at innovations in medical applications.

Advancing NASA's Satellite Control Capabilities: More than Just Better Technology

NASA Technical Reports Server (NTRS)

Smith, Danford

2008-01-01

This viewgraph presentation reviews the work of the Goddard Mission Services Evolution Center (GMSEC) in the development of the NASA's satellite control capabilities. The purpose of the presentation is to provide a quick overview of NASA's Goddard Space Flight Center and our approach to coordinating the ground system resources and development activities across many different missions. NASA Goddard's work in developing and managing the current and future space exploration missions is highlighted. The GMSEC, was established to to coordinate ground and flight data systems development and services, to create a new standard ground system for many missions and to reflect the reality that business reengineering and mindset were just as important.

Tissue engineering in urethral reconstruction—an update

PubMed Central

Mangera, Altaf; Chapple, Christopher R

2013-01-01

The field of tissue engineering is rapidly progressing. Much work has gone into developing a tissue engineered urethral graft. Current grafts, when long, can create initial donor site morbidity. In this article, we evaluate the progress made in finding a tissue engineered substitute for the human urethra. Researchers have investigated cell-free and cell-seeded grafts. We discuss different approaches to developing these grafts and review their reported successes in human studies. With further work, tissue engineered grafts may facilitate the management of lengthy urethral strictures requiring oral mucosa substitution urethroplasty. PMID:23042444

Energy-gap spectroscopy of superconductors using a tunneling microscope

NASA Technical Reports Server (NTRS)

Le Duc, H. G.; Kaiser, W. J.; Stern, J. A.

1987-01-01

A unique scanning tunneling microscope (STM) system has been developed for spectroscopy of the superconducting energy gap. High-resolution control of tunnel current and voltage allows for measurement of superconducting properties at tunnel resistance levels 100-1000 greater than that achieved in prior work. The previously used STM methods for superconductor spectroscopy are compared to those developed for the work reported here. Superconducting energy-gap spectra are reported for three superconductors, Pb, PbBi, and NbN, over a range of tunnel resistance. The measured spectra are compared directly to theory.

Ultra high vacuum test setup for electron gun

NASA Astrophysics Data System (ADS)

Pandiyar, M. L.; Prasad, M.; Jain, S. K.; Kumar, R.; Hannurkar, P. R.

2008-05-01

Ultra High Vacuum (UHV) test setup for electron gun testing has been developed. The development of next generation light sources and accelerators require development of klystron as a radio frequency power source, and in turn electron gun. This UHV electron gun test setup can be used to test the electron guns ranging from high average current, quasi-continuous wave to high peak current, single pulse etc. An electron gun has been designed, fabricated, assembled and tested for insulation up to 80 kV under the programme to develop high power klystron for future accelerators. Further testing includes the electron emission parameters characterization of the cathode, as it determines the development of a reliable and efficient electron gun with high electron emission current and high life time as well. This needs a clean ultra high vacuum to study these parameters particularly at high emission current. The cathode emission current, work function and vapour pressure of cathode surface material at high temperature studies will further help in design and development of high power electron gun The UHV electron gun test setup consists of Turbo Molecular Pump (TMP), Sputter Ion Pump (SIP), pressure gauge, high voltage and cathode power supplies, current measurement device, solenoid magnet and its power supply, residual gas analyser etc. The ultimate vacuum less than 2×10-9 mbar was achieved. This paper describes the UHV test setup for electron gun testing.

Automatic system for ionization chamber current measurements.

PubMed

Brancaccio, Franco; Dias, Mauro S; Koskinas, Marina F

2004-12-01

The present work describes an automatic system developed for current integration measurements at the Laboratório de Metrologia Nuclear of Instituto de Pesquisas Energéticas e Nucleares. This system includes software (graphic user interface and control) and a module connected to a microcomputer, by means of a commercial data acquisition card. Measurements were performed in order to check the performance and for validating the proposed design.

Long-range eye tracking: A feasibility study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jayaweera, S.K.; Lu, Shin-yee

1994-08-24

The design considerations for a long-range Purkinje effects based video tracking system using current technology is presented. Past work, current experiments, and future directions are thoroughly discussed, with an emphasis on digital signal processing techniques and obstacles. It has been determined that while a robust, efficient, long-range, and non-invasive eye tracking system will be difficult to develop, such as a project is indeed feasible.

The object of your affection: how commitment, leadership and justice influence workplace behaviours in health care.

PubMed

Perreira, Tyrone A; Berta, Whitney

2016-03-01

This paper describes the development of a coherent framework that develops nursing knowledge and guides research in workplace behaviours, work performance, and the factors that influence behaviours and performance. Work performance is dependent upon behaviours that are related to one's commitment towards their workplace and leadership interactions. The influence of these concepts on work outcomes has been established in disparate studies, but their precedence in terms of influencing workers' behaviours, is not well understood. A scientific realism approach is applied, where theory and current research in the field of organisational behaviour and work motivation are drawn upon to identify validated constructs and explain their relationships. An augmented framework is produced, incorporating concepts of relevance to work motivation and work attitudes. Propositions, predicated on research evidence, are offered. Conclusions A novel comprehensive framework is developed, extending the range of behaviours important to workers and the organisation. Focusing on targets for which nurses are affectively committed can prove useful to managers. The developed framework can be informative to managers by increasing awareness of the relationships between concepts, such that they are mindful of these constructs while interacting with staff. © 2015 John Wiley & Sons Ltd.

Photo-electronic current transport in back-gated graphene transistor

NASA Astrophysics Data System (ADS)

Srivastava, Ashok; Chen, Xinlu; Pradhan, Aswini K.

2017-04-01

In this work, we have studied photo-electronic current transport in a back-gated graphene field-effect transistor. Under the light illumination, band bending at the metal/graphene interface develops a built-in potential which generates photonic current at varying back-gate biases. A typical MOSFET type back-gated transistor structure uses a monolayer graphene as the channel layer formed over the silicon dioxide/silicon substrate. It is shown that the photo-electronic current consists of current contributions from photovoltaic, photo-thermoelectric and photo-bolometric effects. A maximum external responsivity close to 0.0009A/W is achieved at 30μW laser power source and 633nm wavelength.

Update on developments at SNIF

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zacks, J., E-mail: jamie.zacks@ccfe.ac.uk; Turner, I.; Day, I.

The Small Negative Ion Facility (SNIF) at CCFE has been undergoing continuous development and enhancement to both improve operational reliability and increase diagnostic capability. SNIF uses a CW 13.56MHz, 5kW RF driven volume source with a 30kV triode accelerator. Improvement and characterisation work includes: Installation of a new “L” type RF matching unit, used to calculate the load on the RF generator. Use of the electron suppressing biased insert as a Langmuir probe under different beam extraction conditions. Measurement of the hydrogen Fulcher molecular spectrum, used to calculate gas temperature in the source. Beam optimisation through parameter scans, using coppermore » target plate and visible cameras, with results compared with AXCEL-INP to provide beam current estimate. Modelling of the beam power density profile on the target plate using ANSYS to estimate beam power and provide another estimate of beam current. This work is described, and has allowed an estimation of the extracted beam current of approximately 6mA (4mA/cm2) at 3.5kW RF power and a source pressure of 0.6Pa.« less

How much work-related injury and illness is missed by the current national surveillance system?

PubMed

Rosenman, Kenneth D; Kalush, Alice; Reilly, Mary Jo; Gardiner, Joseph C; Reeves, Mathew; Luo, Zhewui

2006-04-01

We sought to estimate the undercount in the existing national surveillance system of occupational injuries and illnesses. Adhering to the strict confidentiality rules of the U.S. Bureau of Labor Statistics, we matched the companies and individuals who reported work-related injuries and illnesses to the Bureau in 1999, 2000, and 2001 in Michigan with companies and individuals reported in four other Michigan data bases, workers' compensation, OSHA Annual Survey, OSHA Integrated Management Information System, and the Occupational Disease Report. We performed capture-recapture analysis to estimate the number of cases missed by the combined systems. We calculated that the current national surveillance system did not include 61% and with capture-recapture analysis up to 68% of the work-related injuries and illnesses that occurred annually in Michigan. This was true for injuries alone, 60% and 67%, and illnesses alone 66% and 69%, respectively. The current national system for work-related injuries and illnesses markedly underestimates the magnitude of these conditions. A more comprehensive system, such as the one developed for traumatic workplace fatalities, that is not solely dependent on employer based data sources is needed to better guide decision-making and evaluation of public health programs to reduce work-related conditions.

Preparing Master of Public Health Graduates to Work in Local Health Departments.

PubMed

Hemans-Henry, Calaine; Blake, Janice; Parton, Hilary; Koppaka, Ram; Greene, Carolyn M

2016-01-01

To identify key competencies and skills that all master of public health (MPH) graduates should have to be prepared to work in a local health department. In 2011-2012, the New York City Department of Health and Mental Hygiene administered electronic surveys to 2 categories of staff: current staff with an MPH as their highest degree, and current hiring managers. In all, 312 (77%) staff members with an MPH as their highest degree and 170 (57%) hiring managers responded to the survey. Of the respondents with an MPH as their highest degree, 85% stated that their MPH program prepared them for work at the New York City Health Department. Skills for which MPH graduates most often stated they were underprepared included facility in using SAS® statistical software, quantitative data analysis/statistics, personnel management/leadership, and data collection/database management/data cleaning. Among the skills hiring managers identified as required of MPH graduates, the following were most often cited as those for which newly hired MPH graduates were inadequately prepared: quantitative data analysis, researching/conducting literature reviews, scientific writing and publication, management skills, and working with contracts/requests for proposals. These findings suggest that MPH graduates could be better prepared to work in a local health department upon graduation. To be successful, new MPH graduate hires should possess fundamental skills and knowledge related to analysis, communication, management, and leadership. Local health departments and schools of public health must each contribute to the development of the current and future public health workforce through both formal learning opportunities and supplementary employment-based training to reinforce prior coursework and facilitate practical skill development.

The Evolution of Random Number Generation in MUVES

DTIC Science & Technology

2017-01-01

mathematical basis and statistical justification for algorithms used in the code. The working code provided produces results identical to the current...MUVES, includ- ing the mathematical basis and statistical justification for algorithms used in the code. The working code provided produces results...questionable numerical and statistical properties. The development of the modern system is traced through software change requests, resulting in a random number

Internet: Education and Application for the Knowledge Warrior

DTIC Science & Technology

1995-05-01

of the available population to work to support agriculture or mineral extraction. It was during this period in historical development permanent...addresses such as these found on the Internet, ACSC students extracted current information on Chinese politics, environment, culture , leadership... working on a notional scenario, the type of information located was surprising in its level of detail. And while they were able to find almost

Cortical Substrate of Haptic Representation

DTIC Science & Technology

1993-08-24

experience and data from primates , we have developed computational models of short-term active memory. Such models may have technological interest...neurobiological work on primate memory. It is on that empirical work that our current theoretical efforts are 5 founded. Our future physiological research...Academy of Sciences, New York, vol. 608, pp. 318-329, 1990. J.M. Fuster - Behavioral electrophysiology of the prefrontal cortex of the primate . Progress

Development of a Work Control System for Propulsion Testing at NASA Stennis

NASA Technical Reports Server (NTRS)

Messer, Elizabeth A.

2005-01-01

This paper will explain the requirements and steps taken to develop the current Propulsion Test Directorate electronic work control system for Test Operations. The PTD Work Control System includes work authorization and technical instruction documents, such as test preparation sheets, discrepancy reports, test requests, pre-test briefing reports, and other test operations supporting tools. The environment that existed in the E-Complex test areas in the late 1990's was one of enormous growth which brought people of diverse backgrounds together for the sole purpose of testing propulsion hardware. The problem that faced us was that these newly formed teams did not have a consistent and clearly understood method for writing, performing or verifying work. A paper system was developed that would allow the teams to use the same forms, but this still presented problems in the large amount of errors occurring, such as lost paperwork and inconsistent implementation. In a sampling of errors in August 1999, the paper work control system encountered 250 errors out of 230 documents released and completed, for an error rate of 111%.

A Survey on Intermediation Architectures for Underwater Robotics.

PubMed

Li, Xin; Martínez, José-Fernán; Rodríguez-Molina, Jesús; Martínez, Néstor Lucas

2016-02-04

Currently, there is a plethora of solutions regarding interconnectivity and interoperability for networked robots so that they will fulfill their purposes in a coordinated manner. In addition to that, middleware architectures are becoming increasingly popular due to the advantages that they are capable of guaranteeing (hardware abstraction, information homogenization, easy access for the applications above, etc.). However, there are still scarce contributions regarding the global state of the art in intermediation architectures for underwater robotics. As far as the area of robotics is concerned, this is a major issue that must be tackled in order to get a holistic view of the existing proposals. This challenge is addressed in this paper by studying the most compelling pieces of work for this kind of software development in the current literature. The studied works have been assessed according to their most prominent features and capabilities. Furthermore, by studying the individual pieces of work and classifying them several common weaknesses have been revealed and are highlighted. This provides a starting ground for the development of a middleware architecture for underwater robotics capable of dealing with these issues.

Scalability of Several Asynchronous Many-Task Models for In Situ Statistical Analysis.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pebay, Philippe Pierre; Bennett, Janine Camille; Kolla, Hemanth

This report is a sequel to [PB16], in which we provided a first progress report on research and development towards a scalable, asynchronous many-task, in situ statistical analysis engine using the Legion runtime system. This earlier work included a prototype implementation of a proposed solution, using a proxy mini-application as a surrogate for a full-scale scientific simulation code. The first scalability studies were conducted with the above on modestly-sized experimental clusters. In contrast, in the current work we have integrated our in situ analysis engines with a full-size scientific application (S3D, using the Legion-SPMD model), and have conducted nu- mericalmore » tests on the largest computational platform currently available for DOE science ap- plications. We also provide details regarding the design and development of a light-weight asynchronous collectives library. We describe how this library is utilized within our SPMD- Legion S3D workflow, and compare the data aggregation technique deployed herein to the approach taken within our previous work.« less

A Survey on Intermediation Architectures for Underwater Robotics

PubMed Central

Li, Xin; Martínez, José-Fernán; Rodríguez-Molina, Jesús; Martínez, Néstor Lucas

2016-01-01

Currently, there is a plethora of solutions regarding interconnectivity and interoperability for networked robots so that they will fulfill their purposes in a coordinated manner. In addition to that, middleware architectures are becoming increasingly popular due to the advantages that they are capable of guaranteeing (hardware abstraction, information homogenization, easy access for the applications above, etc.). However, there are still scarce contributions regarding the global state of the art in intermediation architectures for underwater robotics. As far as the area of robotics is concerned, this is a major issue that must be tackled in order to get a holistic view of the existing proposals. This challenge is addressed in this paper by studying the most compelling pieces of work for this kind of software development in the current literature. The studied works have been assessed according to their most prominent features and capabilities. Furthermore, by studying the individual pieces of work and classifying them several common weaknesses have been revealed and are highlighted. This provides a starting ground for the development of a middleware architecture for underwater robotics capable of dealing with these issues. PMID:26861321

The development of professional practice standards for Australian general practice nurses.

PubMed

Halcomb, Elizabeth; Stephens, Moira; Bryce, Julianne; Foley, Elizabeth; Ashley, Christine

2017-08-01

The aim of this study was to explore the current role of general practice nurses and the scope of nursing practice to inform the development of national professional practice standards for Australian general practice nurses. Increasing numbers of nurses have been employed in Australian general practice to meet the growing demand for primary care services. This has brought significant changes to the nursing role. Competency standards for nurses working in general practice were first developed in Australia in 2005, but limited attention has been placed on articulating the contemporary scope of practice for nurses in this setting. Concurrent mixed methods design. Data collection was conducted during 2013-2014 and involved two online surveys of Registered and Enrolled Nurses currently working in general practice, a series of 14 focus groups across Australia and a series of consultations with key experts. Data collection enabled the development of 22 Practice Standards separated into four domains: (i) Professional Practice; (ii) Nursing Care; (iii) General Practice Environment and (iv) Collaborative Practice. To differentiate the variations in enacting these Standards, performance indicators for the Enrolled Nurse, Registered Nurse and Registered Nurse Advanced Practice are provided under each Standard. The development of national professional practice standards for nurses working in Australian general practice will support ongoing workforce development. These Standards are also an important means of articulating the role and scope of the nurses' practice for both consumers and other health professionals, as well as being a guide for curriculum development and measurement of performance. © 2017 John Wiley & Sons Ltd.

Method for Estimating Patronage of Demand Responsive Transportation Systems

DOT National Transportation Integrated Search

1977-12-01

This study has developed a method for estimating patronage of demand responsive transportation (DRT) systems. This procedure requires as inputs a description of the intended service area, current work trip patterns, characteristics of the served popu...

Transportation infrastructure : highway pavement design guide is outdated

DOT National Transportation Integrated Search

1997-11-01

The Federal Highway Administration has worked cooperatively with the : American Association of State Highway and Transportation Officials in : developing and updating the pavement design guide. The current guide is : slated to be updated by the year ...

Making Science Work.

ERIC Educational Resources Information Center

Thomas, Lewis

1981-01-01

Presents a viewpoint concerning the impact of recent scientific advances on society. Discusses biological discoveries, space exploration, computer technology, development of new astronomical theories, the behavioral sciences, and basic research. Challenges to keeping science current with technological advancement are also discussed. (DS)

Design of a workstation table with improved crashworthiness performance

DOT National Transportation Integrated Search

2005-11-05

Work is currently underway to develop strategies to protect rail passengers seated at workstation tables during a collision or derailment. Investigations have shown that during a collision, these tables can present a hostile secondary impact environm...

Atmospheric Infrasound during a Large Wildfire

NASA Astrophysics Data System (ADS)

Vance, Alexis; Elbing, Brian

2017-11-01

Numerous natural and manmade sources generate infrasound, including tornado producing storms, human heart, hurricanes, and volcanoes. Infrasound is currently being studied as part of Collaboration Leading Operational UAS Development for Meteorology and Atmospheric Physics (CLOUD MAP), which is a multi-university collaboration focused on development and implementation of unmanned aircraft systems (UAS) and integration with sensors for atmospheric measurements. To support this effort a fixed infrasonic microphone located in Stillwater, Oklahoma has been monitoring atmospheric emissions since September of 2016. While severe storm systems is the primary focus of this work, the system also captures a wide range of infrasonic sources from distances in excess of 300 miles due to an acoustic ceiling and weak atmospheric absorption. The current presentation will focus on atmospheric infrasound observations during a large wildfire on the Kansas-Oklahoma border that occurred between March 6-22, 2017. This work was supported by NSF Grant 1539070.

Thin-film sensors for space propulsion technology: Fabrication and preparation for testing

NASA Technical Reports Server (NTRS)

Kim, Walter S.; Hepp, Aloysius F.

1989-01-01

The goal of this work is to develop and test thin-film thermocouples for Space Shuttle Main Engine (SSME) components. Thin-film thermocouples have been developed for aircraft gas turbine engines and are in use for temperature measurement on turbine blades up to 1800 F. Established aircraft engine gas turbine technology is currently being adapted to turbine engine blade materials and the environment encountered in the SSME, especially severe thermal shock from cryogenic fuel to combustion temperatures. Initial results using coupons of MAR M-246 (+Hf) and PWA 1480 have been followed by fabrication of thin-film thermocouples on SSME turbine blades. Current efforts are focused on preparing for testing in the Turbine Blade Tester at the NASA Marshall Space Flight Center (MSFC). Future work will include testing of thin-film thermocouples on SSME blades of single crystal PWA 1480 at MSFC.

The roles of the AAS Journals' Data Editors

NASA Astrophysics Data System (ADS)

Muench, August; NASA/SAO ADS, CERN/Zenodo.org, Harvard/CfA Wolbach Library

2018-01-01

I will summarize the community services provided by the AAS Journals' Data Editors to support authors’ when citing and preserving the software and data used in the published literature. In addition I will describe the life of a piece of code as it passes through the current workflows for software citation in astronomy. Using this “lifecycle” I will detail the ongoing work funded by a grant from the Alfred P. Sloan Foundation to the American Astronomical Society to improve the citation of software in the literature. The funded development team and advisory boards, made up of non-profit publishers, literature indexers, and preservation archives, is implementing the Force11 Software citation principles for astronomy Journals. The outcome of this work will be new workflows for authors and developers that fit in their current practices while enabling versioned citation of software and granular credit for its creators.

Physical therapy as a profession and its educational development in Pakistan.

PubMed

Memon, Aamir Raoof; Sahibzada, Nasir Mansoor; Azim, Muhammad Ehab; Siddiqui, Furqan Ahmed

2016-11-01

Physical therapists work in different medical and related settings and serve to maintain and restore functional capability. Pakistan has a disability rate of 2.65% with a total of around 5.035 million disabled people. Physical therapy as a profession started in 1956 at the Jinnah Postgraduate Medical Centre with a 2-year diploma, later on 4 years bachelors programme was also started. In 2008, doctor of physical therapy programme was initiated. The representative body "Pakistan Physical Therapy Association" was also established in 2008 which then joined the World Confederation for Physical Therapy in 2011. There is plenty of work being done in the field and it has seen a rapid growth in the past decade compared to the last 50 years. Currently, there are 69 institutions in Pakistan offering various physical therapy courses. The profession currently requires an autonomous regulatory body to control its educational curriculum and development as well as safeguard its interests.

Real life working shift assignment problem

NASA Astrophysics Data System (ADS)

Sze, San-Nah; Kwek, Yeek-Ling; Tiong, Wei-King; Chiew, Kang-Leng

2017-07-01

This study concerns about the working shift assignment in an outlet of Supermarket X in Eastern Mall, Kuching. The working shift assignment needs to be solved at least once in every month. Current approval process of working shifts is too troublesome and time-consuming. Furthermore, the management staff cannot have an overview of manpower and working shift schedule. Thus, the aim of this study is to develop working shift assignment simulation and propose a working shift assignment solution. The main objective for this study is to fulfill manpower demand at minimum operation cost. Besides, the day off and meal break policy should be fulfilled accordingly. Demand based heuristic is proposed to assign working shift and the quality of the solution is evaluated by using the real data.

Factors affecting job satisfaction and retention of medical laboratory professionals in seven countries of Sub-Saharan Africa

PubMed Central

2013-01-01

Effective implementation and sustainability of quality laboratory programmes in Sub-Saharan Africa relies on the development of appropriate staff retention strategies. Assessing the factors responsible for job satisfaction and retention is key for tailoring specific interventions aiming at improving the overall impact of health programmes. A survey was developed to assess these factors among 224 laboratorians working in the laboratory programme the University of Maryland implemented in seven Sub-Saharan African countries. Lack of professional development was the major reason for leaving the previous job for 28% of interviewees who changed jobs in the past five years. Professional development/training opportunities was indicated by almost 90% (195/224) of total interviewees as the most important or a very important factor for satisfaction at their current job. Similarly, regular professional development/opportunities for training was the highest rated incentive to remain at their current job by 80% (179/224). Laboratory professionals employed in the private sector were more likely to change jobs than those working in the public sector (P = 0.002). The findings were used for developing specific strategies for human resources management, in particular targeting professional development, aiming at improving laboratory professionals within the University of Maryland laboratory programme and hence its long-term sustainability. PMID:23958152

Factors affecting job satisfaction and retention of medical laboratory professionals in seven countries of Sub-Saharan Africa.

PubMed

Marinucci, Francesco; Majigo, Mtebe; Wattleworth, Matthew; Paterniti, Antonio Damiano; Hossain, Mian Bazle; Redfield, Robert

2013-08-17

Effective implementation and sustainability of quality laboratory programmes in Sub-Saharan Africa relies on the development of appropriate staff retention strategies. Assessing the factors responsible for job satisfaction and retention is key for tailoring specific interventions aiming at improving the overall impact of health programmes. A survey was developed to assess these factors among 224 laboratorians working in the laboratory programme the University of Maryland implemented in seven Sub-Saharan African countries. Lack of professional development was the major reason for leaving the previous job for 28% of interviewees who changed jobs in the past five years. Professional development/training opportunities was indicated by almost 90% (195/224) of total interviewees as the most important or a very important factor for satisfaction at their current job. Similarly, regular professional development/opportunities for training was the highest rated incentive to remain at their current job by 80% (179/224). Laboratory professionals employed in the private sector were more likely to change jobs than those working in the public sector (P = 0.002). The findings were used for developing specific strategies for human resources management, in particular targeting professional development, aiming at improving laboratory professionals within the University of Maryland laboratory programme and hence its long-term sustainability.

[work motivation -- assessment instruments and their relevance for medical care].

PubMed

Fiedler, Rolf G; Ranft, Andreas; Greitemann, Bernhard; Heuft, Gereon

2005-11-01

The relevance of work motivation for medical research and healthcare, in particular rehabilitation, is described. Four diagnostic instruments in the German language are introduced which can assess work motivation using a scale system: AVEM, JDS, LMI and FBTM. Their possible application and potential usage for the clinical area are discussed. Apart from the FBTM, none of these instruments can be directly used as a general instrument in a normal medical clinical setting. Finally, a current model for work motivation (compensatory model of work motivation and volition) is presented that contains basis concepts, which are judged as important for future research questions concerning the development of motivation diagnostic instruments.

Developing the Polynomial Expressions for Fields in the ITER Tokamak

NASA Astrophysics Data System (ADS)

Sharma, Stephen

2017-10-01

The two most important problems to be solved in the development of working nuclear fusion power plants are: sustained partial ignition and turbulence. These two phenomena are the subject of research and investigation through the development of analytic functions and computational models. Ansatz development through Gaussian wave-function approximations, dielectric quark models, field solutions using new elliptic functions, and better descriptions of the polynomials of the superconducting current loops are the critical theoretical developments that need to be improved. Euler-Lagrange equations of motion in addition to geodesic formulations generate the particle model which should correspond to the Dirac dispersive scattering coefficient calculations and the fluid plasma model. Feynman-Hellman formalism and Heaviside step functional forms are introduced to the fusion equations to produce simple expressions for the kinetic energy and loop currents. Conclusively, a polynomial description of the current loops, the Biot-Savart field, and the Lagrangian must be uncovered before there can be an adequate computational and iterative model of the thermonuclear plasma.

Constraint-based integration of planning and scheduling for space-based observatory management

NASA Technical Reports Server (NTRS)

Muscettola, Nicola; Smith, Steven F.

1994-01-01

Progress toward the development of effective, practical solutions to space-based observatory scheduling problems within the HSTS scheduling framework is reported. HSTS was developed and originally applied in the context of the Hubble Space Telescope (HST) short-term observation scheduling problem. The work was motivated by the limitations of the current solution and, more generally, by the insufficiency of classical planning and scheduling approaches in this problem context. HSTS has subsequently been used to develop improved heuristic solution techniques in related scheduling domains and is currently being applied to develop a scheduling tool for the upcoming Submillimeter Wave Astronomy Satellite (SWAS) mission. The salient architectural characteristics of HSTS and their relationship to previous scheduling and AI planning research are summarized. Then, some key problem decomposition techniques underlying the integrated planning and scheduling approach to the HST problem are described; research results indicate that these techniques provide leverage in solving space-based observatory scheduling problems. Finally, more recently developed constraint-posting scheduling procedures and the current SWAS application focus are summarized.

Research on resistance characteristics of YBCO tape under short-time DC large current impact

NASA Astrophysics Data System (ADS)

Zhang, Zhifeng; Yang, Jiabin; Qiu, Qingquan; Zhang, Guomin; Lin, Liangzhen

2017-06-01

Research of the resistance characteristics of YBCO tape under short-time DC large current impact is the foundation of the developing DC superconducting fault current limiter (SFCL) for voltage source converter-based high voltage direct current system (VSC-HVDC), which is one of the valid approaches to solve the problems of renewable energy integration. SFCL can limit DC short-circuit and enhance the interrupting capabilities of DC circuit breakers. In this paper, under short-time DC large current impacts, the resistance features of naked tape of YBCO tape are studied to find the resistance - temperature change rule and the maximum impact current. The influence of insulation for the resistance - temperature characteristics of YBCO tape is studied by comparison tests with naked tape and insulating tape in 77 K. The influence of operating temperature on the tape is also studied under subcooled liquid nitrogen condition. For the current impact security of YBCO tape, the critical current degradation and top temperature are analyzed and worked as judgment standards. The testing results is helpful for in developing SFCL in VSC-HVDC.

Effects of imbalanced currents on large-format LiFePO4/graphite batteries systems connected in parallel

NASA Astrophysics Data System (ADS)

Shi, Wei; Hu, Xiaosong; Jin, Chao; Jiang, Jiuchun; Zhang, Yanru; Yip, Tony

2016-05-01

With the development and popularization of electric vehicles, it is urgent and necessary to develop effective management and diagnosis technology for battery systems. In this work, we design a parallel battery model, according to equivalent circuits of parallel voltage and branch current, to study effects of imbalanced currents on parallel large-format LiFePO4/graphite battery systems. Taking a 60 Ah LiFePO4/graphite battery system manufactured by ATL (Amperex Technology Limited, China) as an example, causes of imbalanced currents in the parallel connection are analyzed using our model, and the associated effect mechanisms on long-term stability of each single battery are examined. Theoretical and experimental results show that continuously increasing imbalanced currents during cycling are mainly responsible for the capacity fade of LiFePO4/graphite parallel batteries. It is thus a good way to avoid fast performance fade of parallel battery systems by suppressing variations of branch currents.

Modelling of thermal stresses in bearing steel structure generated by electrical current impulses

NASA Astrophysics Data System (ADS)

Birjukovs, M.; Jakovics, A.; Holweger, W.

2018-05-01

This work is the study of one particular candidate for white etching crack (WEC) initiation mechanism in wind turbine gearbox bearings: discharge current impulses flowing through bearing steel with associated thermal stresses and material fatigue. Using data/results from previously published works, the authors develop a series of models that are utilized to simulate these processes under various conditions/local microstructure configurations, as well as to verify the results of the previous numerical studies. Presented models show that the resulting stresses are several orders of magnitude below the fatigue limit/yield strength for the parameters used herein. Results and analysis of models provided by Scepanskis, M. et al. also indicate that certain effects predicted in their previous work resulted from a physically unfounded assumption about material thermodynamic properties and numerical model implementation issues.

The Development, Evolution, and Status of Holland's Theory of Vocational Personalities: Reflections and Future Directions for Counseling Psychology

ERIC Educational Resources Information Center

Nauta, Margaret M.

2010-01-01

This article celebrates the 50th anniversary of the introduction of John L. Holland's (1959) theory of vocational personalities and work environments by describing the theory's development and evolution, its instrumentation, and its current status. Hallmarks of Holland's theory are its empirical testability and its user-friendliness. By…

The Potential of School-Linked Centers To Promote Adolescent Health and Development. Working Paper.

ERIC Educational Resources Information Center

Millstein, Susan G.

The future of school-linked adolescent health centers cannot be determined without further evaluation. The recent development of school-linked health centers stems from concerns about the special health needs of adolescents. Currently there are 125 school-based and school-linked centers in operation. Characteristics include the following: (1) most…

Living Improvement 2: A Case Study of a Secondary School in England

ERIC Educational Resources Information Center

McGinity, Ruth; Gunter, Helen M.

2012-01-01

Building on a decade of a school-university partnership we report on a current project that is examining the development of a learning policy within Kingswood High School. We focus specifically on the development of a learning culture, and we examine how parents and children are working productively within the official policy. Using empirical data…

Hybrid Professional Development: An Investigation of Participant Work Locus of Control and Use of Online Resources

ERIC Educational Resources Information Center

O'Donovan-Korte, Kristy M.

2016-01-01

Current demands have prompted many school organizations to look toward online resources in order to provide and fiscally manage professional development. The perpetually evolving technology has afforded administrators the opportunity to offer a variety of online resources, such as platforms for communication and collaboration, social media sites,…

Image analysis library software development

NASA Technical Reports Server (NTRS)

Guseman, L. F., Jr.; Bryant, J.

1977-01-01

The Image Analysis Library consists of a collection of general purpose mathematical/statistical routines and special purpose data analysis/pattern recognition routines basic to the development of image analysis techniques for support of current and future Earth Resources Programs. Work was done to provide a collection of computer routines and associated documentation which form a part of the Image Analysis Library.

Developing an Open Resource Bank for Interactive Teaching of STEM: Perspecives of School Teachers and Teacher Educators

ERIC Educational Resources Information Center

Hassler, Bjoern; Hennessy, Sara; Knight, Simon; Connolly, Teresa

2014-01-01

Much of the current literature related to Open Educational Resource (OER) development and practice concentrates on higher education, although a growing body of work is also emerging for the primary and secondary school sectors. This article examines the user perspectives of teachers and teacher educators, regarding: discovery of teaching…

The Professional Development Requirements of Workplace English Language and Literacy Programme Practitioners. An Adult Literacy National Project Report

ERIC Educational Resources Information Center

Berghella, Tina; Molenaar, John; Wyse, Linda

2006-01-01

This report examines the extent and nature of professional development required to meet the current and future needs of Workplace English Language and Literacy Programme practitioners. While the working environment for such practitioners is becoming more complex, with greater demands on them to have industry knowledge and project management…

Learning and Developing as a University Teacher: Narratives of Early Career Academics in Estonia

ERIC Educational Resources Information Center

Remmik, Marvi; Karm, Mari; Lepp, Liina

2013-01-01

In recent years the higher education context in Estonia, as in most European countries, has changed a lot. All changes have an impact on university teachers' practice and their work organisation, and are presenting new challenges. The current research aims at developing an understanding of Estonian early career academics' professional identity by…

Exploring the Meso-System: The Roles of Community, Family, and Peers in Adolescent Delinquency and Positive Youth Development

ERIC Educational Resources Information Center

Smith, Emilie Phillips; Faulk, Monique; Sizer, Monteic A.

2016-01-01

Community contexts are important ecological settings related to problem behavior and positive youth development (PYD). While substantial work has focused on neighborhood disadvantage, the current study explores the role of community assets, specifically linkages to important institutional resources and people in those settings. These concepts are…

State Secondary CTE Standards: Developing a Framework out of a Patchwork of Policies

ERIC Educational Resources Information Center

Castellano, Marisa; Harrison, Linda; Schneider, Sherrie

2007-01-01

Many state educational administrators are currently working to define secondary career and technical education (CTE) content standards that specify the knowledge and skills students are expected to master in CTE program areas. The two-phase project on which this report is based explored (a) the progress and status of states in developing statewide…

Career Transitions for Adults. Maine Guide. A Developmental Framework for Life Choices.

ERIC Educational Resources Information Center

Maine State Dept. of Educational and Cultural Services, Augusta. Bureau of Adult and Secondary Vocational Education.

This curriculum presents career, academic, and life skill activities to assist education and training organizations in developing and delivering comprehensive career development and life skill programs. It is designed for the out-of-school person who has life and work experiences and who wants to assess a current life or career situation. The…

Development of Neural Systems for Processing Social Exclusion from Childhood to Adolescence

ERIC Educational Resources Information Center

Bolling, Danielle Z.; Pitskel, Naomi B.; Deen, Ben; Crowley, Michael J.; Mayes, Linda C.; Pelphrey, Kevin A.

2011-01-01

Adolescence is a period of development in which peer relationships become especially important. A computer-based game (Cyberball) has been used to explore the effects of social exclusion in adolescents and adults. The current functional magnetic resonance imaging (fMRI) study used Cyberball to extend prior work to the cross-sectional study of…

Small Farm Grain Storage. Appropriate Technologies for Development. Manual M-2.

ERIC Educational Resources Information Center

Lindblad, Carl; Druben, Laurel

Designed as a working and teaching tool for development workers in their field activities, this manual combines in one volume the basic principles of grain storage and the practical solutions currently being used and tested around the world to combat grain storage problems. Each of six sections begins with informative material on the topic to be…

Development of Specialists to Serve the Family Life and Impact Home Economics Programs. Final Report.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Center for Vocational Education.

The purpose of the project was to provide current and/or prospective impact home economics teachers with opportunities to develop the sensitivity and skills needed to work with disadvantaged populations in inner city and rural areas. Twenty-four participants completed a one-week orientation workshop and a six-week internship. The orientation…

Teaching Sustainable Development Concepts in the Laboratory: A Solid-Liquid Extraction Experiment

ERIC Educational Resources Information Center

Parajo, Juan Carlos; Dominguez, Herminia; Santos, Valentin; Alonso, Jose Luis; Garrote, Gil

2008-01-01

One of the principles of sustainable development is to replace chemicals traditionally derived from oil with alternative, renewable materials. For example, phenol and phenol derivatives currently used in the manufacture of wood adhesives can be replaced (at least in part) by biopolymers extracted from biomass. In this work, pine bark (a renewable…

Understanding Writing Problems in Young Children: Contributions of Cognitive Skills to the Development of Written Expression

ERIC Educational Resources Information Center

Childress, Amy

2011-01-01

While several models of adult writing have been proposed and studied, the development of writing skills in young children has only recently garnered attention. Using measures of fine-motor, language, working memory, and attention/executive functions, the current study explored motor and cognitive skills that may contribute to writing skill in…

Only Self-Generated Actions Create Sensori-Motor Systems in the Developing Brain

ERIC Educational Resources Information Center

James, Karin Harman; Swain, Shelley N.

2011-01-01

Previous research shows that sensory and motor systems interact during perception, but how these connections among systems are created during development is unknown. The current work exposes young children to novel "verbs" and objects through either (a) actively exploring the objects or (b) by seeing an experimenter interact with the objects.…

Pointing and Jitter Control for the USNA Multi-Beam Combining System

DTIC Science & Technology

2013-05-10

previous work, an adaptive H-infinity optimal controller has been developed to control a single beam using a beam position detector for feedback... turbulence and airborne particles, platform jitter, lack of feedback from the target , and current laser technology represent just a few of these...lasers. Solid state lasers, however, cannot currently provide high enough power levels to destroy a target using a single beam. On solid-state

A network security monitor

DOE Office of Scientific and Technical Information (OSTI.GOV)

Heberlein, L.T.; Dias, G.V.; Levitt, K.N.

1989-11-01

The study of security in computer networks is a rapidly growing area of interest because of the proliferation of networks and the paucity of security measures in most current networks. Since most networks consist of a collection of inter-connected local area networks (LANs), this paper concentrates on the security-related issues in a single broadcast LAN such as Ethernet. Specifically, we formalize various possible network attacks and outline methods of detecting them. Our basic strategy is to develop profiles of usage of network resources and then compare current usage patterns with the historical profile to determine possible security violations. Thus, ourmore » work is similar to the host-based intrusion-detection systems such as SRI's IDES. Different from such systems, however, is our use of a hierarchical model to refine the focus of the intrusion-detection mechanism. We also report on the development of our experimental LAN monitor currently under implementation. Several network attacks have been simulated and results on how the monitor has been able to detect these attacks are also analyzed. Initial results demonstrate that many network attacks are detectable with our monitor, although it can surely be defeated. Current work is focusing on the integration of network monitoring with host-based techniques. 20 refs., 2 figs.« less

A follow-up study on the association of working conditions and lifestyles with the development of (perceived) mental symptoms in workers of a telecommunication enterprise.

PubMed

Suwazono, Y; Okubo, Y; Kobayashi, E; Kido, T; Nogawa, K

2003-10-01

This study investigated the association of working conditions and lifestyle with mental health in Japanese workers. A follow-up study was carried out in the Kanto district of Japan of workers in a telecommunications enterprise who received their first annual health check-up between 1992 and 1996 and were between 20 and 54 years old. Workers who reported mental symptoms, had a past history of disease, or current illness at their first check-up were excluded from the analysis. In total, the study included 23 837 workers. The association between working conditions and lifestyle and the development of mental symptoms was investigated by pooled logistic regression analyses. Working long hours and part-time work, as opposed to normal daytime hours of work, were factors associated with the development of mental symptoms in males, as were smoking, short sleeping hours, little physical exercise, rarely taking three meals a day, frequently eating within 1 h before sleep, much preference for salty meals and little preference for vegetables. Consumption of alcohol was negatively associated with the development of mental symptoms in males. Overall, the results suggested that the lower the Healthy Work and Lifestyle Score, the higher the risk of developing mental symptoms. Working conditions and lifestyle, especially food preferences, have an apparent influence on the mental health of Japanese workers. Moreover, the Healthy Work and Lifestyle Score indicates that working conditions and lifestyle appear to have a cumulative influence upon the mental health of Japanese workers.

The development and initial validation of the Decent Work Scale.

PubMed

Duffy, Ryan D; Allan, Blake A; England, Jessica W; Blustein, David L; Autin, Kelsey L; Douglass, Richard P; Ferreira, Joaquim; Santos, Eduardo J R

2017-03-01

Decent work is positioned as the centerpiece of the recently developed Psychology of Working Theory (PWT; Duffy, Blustein, Diemer, & Autin, 2016). However, to date, no instrument exists which assesses all 5 components of decent work from a psychological perspective. In the current study, we developed the Decent Work Scale (DWS) and demonstrated several aspects of validity with 2 samples of working adults. In Study 1 (N = 275), a large pool of items were developed and exploratory factor analysis was conducted resulting in a final 15-item scale with 5 factors/subscales corresponding to the 5 components of decent work: (a) physically and interpersonally safe working conditions, (b) access to health care, (c) adequate compensation, (d) hours that allow for free time and rest, and (e) organizational values that complement family and social values. In Study 2 (N = 589), confirmatory factor analysis demonstrated that a 5-factor, bifactor model offered the strongest and most parsimonious fit to the data. Configural, metric, and scalar invariance models were tested demonstrating that the structure of the instrument did not differ across gender, income, social class, and majority/minority racial/ethnic groups. Finally, the overall scale score and 5 subscale scores correlated in the expected directions with similar constructs supporting convergent and discriminant evidence of validity, and subscale scores evidenced predictive validity in the prediction of job satisfaction, work meaning, and withdrawal intentions. The development of this scale provides a useful tool for researchers and practitioners seeking to assess the attainment of decent work among employed adults. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Gravitational, erosional and sedimentary processes on volcanic ocean islands: Insights from the submarine morphology of Madeira archipelago

NASA Astrophysics Data System (ADS)

Quartau, R.; Ramalho, R.; Madeira, J.; Santos, R.; Rodrigues, A.; Roque, C.; Carrara, G.; da Silveira, A. B.

2017-12-01

In this work we report detailed observations of high-resolution bathymetric and backscatter mosaics of Madeira archipelago covering from the nearshore to the deep sea and relate them with the physical and geological setting of the islands. Our observations reveal that the submarine flanks of the archipelago are deeply dissected by large landslide scars and that most of them have involved subaerial material. Below the shelf break, landslide chutes develop downslope forming poorly defined depositional lobes. Around the islands, a large tributary system composed of gullies and channels develop where no significant rocky/ridge outcrops are present. This system is likely formed by turbidity currents that are triggered by hyperpicnal flows in Madeira or by storm-induced offshore sediment transport on Porto Santo and Desertas islands. At the lower part of the flanks (-3000 to -4300 m), where seafloor gradients decrease to 0.5º-3º, several scour and sediment wave fields are present, with the former normally occurring upslope of the latter. Sediment waves are often associated with the depositional lobes of the landslides but also occur offshore poorly-developed tributary systems. Sediment wave fields and scours are mostly absent on areas where the tributary systems are well developed and/or are dominated by rocky outcrops. Our study suggests that scours and sediment wave fields are probably formed by turbidity currents that suffer hydraulic jumps where the seafloor gradients are significantly reduced and where the currents become unconfined. The largest scours were found in areas without upslope channel systems and independently of wave fields, although also related to unconfined turbidity currents. Our observations show that tributary systems are better developed in prominent and rainy islands such as Madeira. On low and dry islands such as Porto Santo and Desertas, these are poorly developed and unconfined turbidite currents favour the development of scours and sediment wave fields. AcknowledgmentsThis work is funded by FCT-Fundação para a Ciência e a Tecnologia through the PLATMAR project (PTDC/GEO-GEO/0051/2014)

Advancing knowledge in work-related rehabilitation - review of research published in the journal of WORK.

PubMed

Prodinger, Birgit; Magalhães, Lilian

2010-01-01

Many studies published in the journal WORK in the recent decades have discussed work and employment trends. However, the dimensions of these contributions over time have not been reviewed. The main objective of this study was to investigate the knowledge development in regard to work-related rehabilitation in WORK over the last two decades. A scoping review was conducted using the following five stages: (i) identifying research question, (ii) identifying relevant studies, (iii) study selection, (iv) charting, summarizing, and collating the data, and (v) reporting the results. Studies were selected from the WORK ARTicle Database. Seventy-five relevant studies were identified. The findings reflect that WORK has published papers from across the world, with most of the studies from the United States, Sweden, Canada, and Hong Kong. The complexity and multi-factorial nature of work-related rehabilitation was reflected in the application of quantitative, qualitative, and mixed method research approaches, as well as case studies. Study participants were characterized by work, and non-work related injuries, systematic diseases/chronic illness, fulfilled certain socio-demographic characteristic, and represented various stakeholders. Fewer studies drew on secondary resources. In the findings one re-occurring theme has been noted: 'maintaining/obtaining/returning to secure and stable employment/work'. Four key-reflections evolved from this scoping review that provide potential avenues for future research. These key-reflections include (i) the national, transnational and international dimension of the reviewed studies, (ii) the various societal levels informing work-related rehabilitation practices, (iii) the diversity of methodologies applied in current research, and (iv) the variability of terminology used within the reviewed studies. The journal WORK has published a variety of research over the last two decades and contributed significantly to our current understanding of work-related rehabilitation. However, further research in these reflective areas would expand the current knowledge base.

Implementing the work disability prevention paradigm among therapists in Hong Kong: facilitators and barriers.

PubMed

Szeto, Grace P Y; Cheng, Andy S K; Lee, Edwin W C; Schonstein, Eva; Gross, Douglas P

2011-03-01

This is a discussion paper to examine the issues surrounding management of work-related injuries by physiotherapists and occupational therapists in Hong Kong. Therapists working in public hospitals are faced with managing injured workers with limited resources and this frequently results in suboptimal outcomes. In this paper, five experienced therapists critically reviewed the current practices in the physiotherapy and occupational therapy professions in Hong Kong, with regard to managing patients with work injuries. In many hospitals, therapists still practice with a disease-based model focusing on symptom relief and restoration of general physical function. We collated information about current programs initiated by physiotherapists and occupational therapists to provide more strategic intervention strategies for early screening of high-risk patients and adaptive biopsychosocial interventions targeting return-to-work outcomes. Clinical and system-level barriers and facilitators of a major paradigm shift towards work disability prevention are discussed. Physiotherapists and occupational therapists need to develop more strategic collaborations and actively voice out the need for major systematic changes within the local healthcare system, in order to provide a more effective management approach in line with the concept of Work Disability Prevention.

Safety assessment in plant layout design using indexing approach: implementing inherent safety perspective. Part 2-Domino Hazard Index and case study.

PubMed

Tugnoli, Alessandro; Khan, Faisal; Amyotte, Paul; Cozzani, Valerio

2008-12-15

The design of layout plans requires adequate assessment tools for the quantification of safety performance. The general focus of the present work is to introduce an inherent safety perspective at different points of the layout design process. In particular, index approaches for safety assessment and decision-making in the early stages of layout design are developed and discussed in this two-part contribution. Part 1 (accompanying paper) of the current work presents an integrated index approach for safety assessment of early plant layout. In the present paper (Part 2), an index for evaluation of the hazard related to the potential of domino effects is developed. The index considers the actual consequences of possible escalation scenarios and scores or ranks the subsequent accident propagation potential. The effects of inherent and passive protection measures are also assessed. The result is a rapid quantification of domino hazard potential that can provide substantial support for choices in the early stages of layout design. Additionally, a case study concerning selection among various layout options is presented and analyzed. The case study demonstrates the use and applicability of the indices developed in both parts of the current work and highlights the value of introducing inherent safety features early in layout design.

Development of design principles for automated systems in transport control.

PubMed

Balfe, Nora; Wilson, John R; Sharples, Sarah; Clarke, Theresa

2012-01-01

This article reports the results of a qualitative study investigating attitudes towards and opinions of an advanced automation system currently used in UK rail signalling. In-depth interviews were held with 10 users, key issues associated with automation were identified and the automation's impact on the signalling task investigated. The interview data highlighted the importance of the signallers' understanding of the automation and their (in)ability to predict its outputs. The interviews also covered the methods used by signallers to interact with and control the automation, and the perceived effects on their workload. The results indicate that despite a generally low level of understanding and ability to predict the actions of the automation system, signallers have developed largely successful coping mechanisms that enable them to use the technology effectively. These findings, along with parallel work identifying desirable attributes of automation from the literature in the area, were used to develop 12 principles of automation which can be used to help design new systems which better facilitate cooperative working. The work reported in this article was completed with the active involvement of operational rail staff who regularly use automated systems in rail signalling. The outcomes are currently being used to inform decisions on the extent and type of automation and user interfaces in future generations of rail control systems.

USGS River Ecosystem Modeling: Where Are We, How Did We Get Here, and Where Are We Going?

USGS Publications Warehouse

Hanson, Leanne; Schrock, Robin; Waddle, Terry; Duda, Jeffrey J.; Lellis, Bill

2009-01-01

This report developed as an outcome of the USGS River Ecosystem Modeling Work Group, convened on February 11, 2008 as a preconference session to the second USGS Modeling Conference in Orange Beach, Ala. Work Group participants gained an understanding of the types of models currently being applied to river ecosystem studies within the USGS, learned how model outputs are being used by a Federal land management agency, and developed recommendations for advancing the state of the art in river ecosystem modeling within the USGS. During a break-out session, participants restated many of the recommendations developed at the first USGS Modeling Conference in 2006 and in previous USGS needs assessments. All Work Group recommendations require organization and coordination across USGS disciplines and regions, and include (1) enhancing communications, (2) increasing efficiency through better use of current human and technologic resources, and (3) providing a national infrastructure for river ecosystem modeling resources, making it easier to integrate modeling efforts. By implementing these recommendations, the USGS will benefit from enhanced multi-disciplinary, integrated models for river ecosystems that provide valuable risk assessment and decision support tools for adaptive management of natural and managed riverine ecosystems. These tools generate key information that resource managers need and can use in making decisions about river ecosystem resources.

Albeni Falls Wildlife Mitigation : Annual Report 2002.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Terra-Berns, Mary

The Albeni Falls Interagency Work Group continued to actively engage in implementing wildlife mitigation actions in 2002. Regular Work Group meetings were held to discuss budget concerns affecting the Albeni Falls Wildlife Mitigation Program, to present potential acquisition projects, and to discuss and evaluate other issues affecting the Work Group and Project. Work Group members protected 1,386.29 acres of wildlife habitat in 2002. To date, the Albeni Falls project has protected approximately 5,914.31 acres of wildlife habitat. About 21% of the total wildlife habitat lost has been mitigated. Administrative activities have increased as more properties are purchased and continue tomore » center on restoration, operation and maintenance, and monitoring. In 2001, Work Group members focused on development of a monitoring and evaluation program as well as completion of site-specific management plans. This year the Work Group began implementation of the monitoring and evaluation program performing population and plant surveys, data evaluation and storage, and map development as well as developing management plans. Assuming that the current BPA budget restrictions will be lifted in the near future, the Work Group expects to increase mitigation properties this coming year with several potential projects.« less

DTK C/Fortran Interface Development for NEAMS FSI Simulations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Slattery, Stuart R.; Lebrun-Grandie, Damien T.

This report documents the development of DataTransferKit (DTK) C and Fortran interfaces for fluid-structure-interaction (FSI) simulations in NEAMS. In these simulations, the codes Nek5000 and Diablo are being coupled within the SHARP framework to study flow-induced vibration (FIV) in reactor steam generators. We will review the current Nek5000/Diablo coupling algorithm in SHARP and the current state of the solution transfer scheme used in this implementation. We will then present existing DTK algorithms which may be used instead to provide an improvement in both flexibility and scalability of the current SHARP implementation. We will show how these can be used withinmore » the current FSI scheme using a new set of interfaces to the algorithms developed by this work. These new interfaces currently expose the mesh-free solution transfer algorithms in DTK, a C++ library, and are written in C and Fortran to enable coupling of both Nek5000 and Diablo in their native Fortran language. They have been compiled and tested on Cooley, the test-bed machine for Mira at ALCF.« less

Developmental Neurotoxicology: History and Outline of ...

EPA Pesticide Factsheets

The present work provides a brief review of basic concepts in developmental neurotoxicology, as well as current representative testing guidelines for evaluating developmental neurotoxicity (DNT) of xenobiotics. Historically, DNT was initially recognized as a “functional” teratogenicity: the main concern was that prenatal and/or early postnatal exposures to chemicals during critical periods of central nervous system (CNS) development would cause later functional abnormalities of the brain. Current internationally harmonized DNT study guidelines are thus intended to predict adverse effects of test compounds on the developing CNS by observing such postnatal parameters as motor activity, startle response, and learning and memory, as well as neropathological alterations. The reliability of current DNT study guidelines and sensitivity of testing methodologies recommended in these guidelines have been confirmed by retrospective evaluations of the many international and domestic collaborative validation studies in developed nations including Japan. Invited review with brief review of basic concepts in developmental neurotoxicology, as well as current representative testing guidelines for evaluating developmental neurotoxicity (DNT) of xenobiotics.

Prevention of work disability due to musculoskeletal disorders: the challenge of implementing evidence.

PubMed

Loisel, Patrick; Buchbinder, Rachelle; Hazard, Rowland; Keller, Robert; Scheel, Inger; van Tulder, Maurits; Webster, Barbara

2005-12-01

The process of returning disabled workers to work presents numerous challenges. In spite of the growing evidence regarding work disability prevention, little uptake of this evidence has been observed. One reason for limited dissemination of evidence is the complexity of the problem, as it is subject to multiple legal, administrative, social, political, and cultural challenges. A literature review and collection of experts' opinion is presented, on the current evidence for work disability prevention, and barriers to evidence implementation. Recommendations are presented for enhancing implementation of research results. The current evidence regarding work disability prevention shows that some clinical interventions (advice to return to modified work and graded activity programs) and some non-clinical interventions (at a service and policy/community level but not at a practice level) are effective in reducing work absenteeism. Implementation of evidence in work disability is a major challenge because intervention recommendations are often imprecise and not yet practical for immediate use, many barriers exist, and many stakeholders are involved. Future studies should involve all relevant stakeholders and aim at developing new strategies that are effective, efficient, and have a potential for successful implementation. These studies should be based upon a clearer conceptualization of the broader context and inter-relationships that determine return to work outcomes.

Intracranial Pressure Monitoring—Review and Avenues for Development

PubMed Central

Dolmans, Rianne G. F.

2018-01-01

Intracranial pressure (ICP) monitoring is a staple of neurocritical care. The most commonly used current methods of monitoring in the acute setting include fluid-based systems, implantable transducers and Doppler ultrasonography. It is well established that management of elevated ICP is critical for clinical outcomes. However, numerous studies show that current methods of ICP monitoring cannot reliably define the limit of the brain’s intrinsic compensatory capacity to manage increases in pressure, which would allow for proactive ICP management. Current work in the field hopes to address this gap by harnessing live-streaming ICP pressure-wave data and a multimodal integration with other physiologic measures. Additionally, there is continued development of non-invasive ICP monitoring methods for use in specific clinical scenarios. PMID:29401746

Unit Operations in Microgravity.

ERIC Educational Resources Information Center

Allen, David T.; Pettit, Donald R.

1987-01-01

Presents some of the work currently under way in the development of microgravity chemical processes. Highlights some of the opportunities for materials processing in outer space. Emphasizes some of the contributions that chemical engineers can make in this emerging set of technologies. (TW)

Multi-Modal Traveler Information System - Alternative GCM Corridor Technologies and Strategies

DOT National Transportation Integrated Search

1997-10-24

The purpose of this working paper is to summarize current and evolving Intelligent Transportation System (ITS) technologies and strategies related to the design, development, and deployment of regional multi-modal traveler information systems. This r...

Development of uniform standards for allowable lane closure : final report, September 2008.

DOT National Transportation Integrated Search

2008-09-01

Procedures for determining allowable lane closure hours to perform maintenance, construction, resurfacing, regional permit and major access permit work on the state highway system were evaluated. The current process involves the collection of traffic...

LTPP beyond FY 2009 : what needs to be done?

DOT National Transportation Integrated Search

2009-01-01

This report summarizes the current status of the Long-Term Pavement Performance (LTPP) program and its major activities -- data collection, data storage, data analysis, and product development. It describes the work that will be needed beyond 2009 to...

"Working towards being ready": A grounded theory study of how practising midwives maintain their ongoing competence to practise their profession.

PubMed

Calvert, Susan; Smythe, Elizabeth; McKenzie-Green, Barbara

2017-07-01

to present a grounded theory research study explaining how New Zealand midwives maintain their ongoing competence to practise their profession. grounded theory, an interpretive emergent research methodology was used to examine the process of maintaining competence in midwifery practice. New Zealand urban and rural practice settings. twenty-six midwives from across New Zealand were interviewed and asked about maintaining their competence to practise. Five midwives were interviewed twice, to explore the emerging findings and as one method of member checking. the grounded theory of 'working towards being ready' describes a continuous process in which midwives engage as they work to maintain practice competence. The component parts comprise professional positioning, identifying needs, strategizing solutions and reflecting on practice. The process is contextual, diverse and is influenced by the practice setting where the salient conditions of resourcing, availability and opportunity for engagement in activities are significant. across the midwifery profession, midwives in New Zealand are currently working under the generic umbrella of midwifery practice. Midwives work across a range of practice arenas in diverse ways focussed on providing safe care and require a range of professional development activities germane to their area of practice. When the midwife has access to professional development pertinent to their practice, women and the profession benefit. As there is diversity of practice, then mandated processes for ongoing competence need to have flexibility to reflect that diversity. midwives engage in development that allows them to remain current in practice and that enables them to provide appropriate care to women and their babies. As a consequence they can develop expertise in certain aspects of midwifery. Mandated processes that require engagement in activities aimed at demonstration of competence should be evaluated and tailored to ensure they meet the needs of the developing profession. Copyright © 2017 Elsevier Ltd. All rights reserved.

Promoting practical clinical management learning: the current situation about Information and Communications Technology capability development in student nurses.

PubMed

Willmer, Marian

2005-11-01

This paper is about work-based learning in information management for student nurses. It seeks, through a literature review, to make a case for and promote Information and Communications Technology capability development in student nurses within their clinical environment. The profession of nursing, like many other jobs, is facing the increasing usage of information technology in day-to-day operations. Admission and discharges of patients have been held on computer databases since at least the 1980s. With the new Labour Government in 1997, increasing focus was placed on the effectiveness of the National Health Service and using computers as one way to assist in achieving greater effectiveness. Nurse education therefore needed to reflect this need and support trainee nurses to acquire skills in Information and Communications Technology. This paper is part of an ongoing professional doctorate inquiry into Information and Communications Technology capability development in student nurses. A literature search was conducted on teaching information and technology skills via Cumulative Index to Nursing and Allied Health Literature. Most of the available studies were neither based on the UK nor were they about student nurses. As there is a dearth of published work in this specific area, relevant, related and tangential literature was reviewed. It is argued that current practice and published work on Information and Communications Technology capability development by student nurses hardly exists. The literature confirmed that success in this area requires sound change management, an understanding of National Health Service culture, and effective people leadership skills. Nurse educators and managers need to pay more attention to understand how organizations work, particularly organizations where student nurses carry out their work. As the search revealed a significant gap in the literature in this area, a practical conceptual framework to fully analyse, develop and implement sustained Information and Communications Technology capability in student nurses is proposed.

Spaceport Command and Control System Automated Testing

NASA Technical Reports Server (NTRS)

Stein, Meriel

2017-01-01

The Spaceport Command and Control System (SCCS) is the National Aeronautics and Space Administrations (NASA) launch control system for the Orion capsule and Space Launch System, the next generation manned rocket currently in development. This large system requires high quality testing that will properly measure the capabilities of the system. Automating the test procedures would save the project time and money. Therefore, the Electrical Engineering Division at Kennedy Space Center (KSC) has recruited interns for the past two years to work alongside full-time engineers to develop these automated tests, as well as innovate upon the current automation process.

Development and current applications of assisted fertilization.

PubMed

Palermo, Gianpiero D; Neri, Queenie V; Monahan, Devin; Kocent, Justin; Rosenwaks, Zev

2012-02-01

Since the very early establishment of in vitro insemination, it became clear that one of the limiting steps is the achievement of fertilization. Among the different assisted fertilization methods, intracytoplasmic sperm injection emerged as the ultimate technique to allow fertilization with ejaculated, epididymal, and testicular spermatozoa. This work describes the early steps that brought forth the development of intracytoplasmic sperm injection and its role in assisted reproductive techniques. The current methods to select the preferential male gamete will be elucidated and the concerns related to the offspring of severe male factor couples will be discussed. Copyright © 2012. Published by Elsevier Inc.

Spaceport Command and Control System Automation Testing

NASA Technical Reports Server (NTRS)

Hwang, Andrew

2017-01-01

The Spaceport Command and Control System (SCCS) is the National Aeronautics and Space Administrations (NASA) launch control system for the Orion capsule and Space Launch System, the next generation manned rocket currently in development. This large system requires high quality testing that will properly measure the capabilities of the system. Automating the test procedures would save the project time and money. Therefore, the Electrical Engineering Division at Kennedy Space Center (KSC) has recruited interns for the past two years to work alongside full-time engineers to develop these automated tests, as well as innovate upon the current automation process.

Magnetic nanoparticles based cancer therapy: current status and applications.

PubMed

Zhang, Huan; Liu, Xiao Li; Zhang, Yi Fan; Gao, Fei; Li, Ga Long; He, Yuan; Peng, Ming Li; Fan, Hai Ming

2018-04-01

Nanotechnology holds a promising potential for developing biomedical nanoplatforms in cancer therapy. The magnetic nanoparticles, which integrate uniquely appealing features of magnetic manipulation, nanoscale heat generator, localized magnetic field and enzyme-mimics, prompt the development and application of magnetic nanoparticles-based cancer medicine. Considerable success has been achieved in improving the magnetic resonance imaging (MRI) sensitivity, and the therapeutic function of the magnetic nanoparticles should be given adequate attention. This work reviews the current status and applications of magnetic nanoparticles based cancer therapy. The advantages of magnetic nanoparticles that may contribute to improved therapeutics efficacy of clinic cancer treatment are highlighted here.

Syntactic Metals: A Survey of Current Technology

NASA Technical Reports Server (NTRS)

Erikson, Ray

2003-01-01

Syntactic metals are a relatively new development in materials science. Several approaches to synthesizing these materials have been tried, and the handful of researchers in this field are beginning to make progress in defining useful compositions and processes. Syntactic metals can provide materials with dramatically improved specific strength and stiffness over their parent alloys, while retaining the isotropy that makes ordinary metals preferable to fiber-reinforced laminated composites in many applications. This paper reviews syntactic material concepts in general, the current state of the art (including the author's own work in syntactic aluminum), and the direction of future developments.

Combined Quarterly Technical Report Number 23. SATNET Development and Operation. Pluribus Satellite IMP Development. Remote Site Maintenance. Internet Operations and Maintenance. Mobile Access Terminal Network. TCP for the HP3000. TCP-TAC. TCP for VAX-UNIX

DTIC Science & Technology

1981-11-01

evaluate and test these ideas in the Internet research context. 4. Field third-generation gateways. At this point in time, we purposely avoid selecting a...plan to cover the period from now until the time when a gateway system can be fielded which implements the results of the current work in the Internet ... research community. The current gateway system is inadequate from both a functionality and a• performance standpoint, and therefore the transition

Ergonomic risk assessment with DesignCheck to evaluate assembly work in different phases of the vehicle development process.

PubMed

Winter, Gabriele; Schaub, Karlheinz G; Großmann, Kay; Laun, Gerhard; Landau, Kurt; Bruder, Ralph

2012-01-01

Occupational hazards exist, if the design of the work situation is not in accordance with ergonomic design principles. At assembly lines ergonomics is applied to the design of work equipment and tasks and to work organisation. The ignoring of ergonomic principles in planning and design of assembly work leads to unfavourable working posture, action force and material handling. Disorders of the musculoskeletal system are of a common occurrence throughout Europe. Musculoskeletal disorders are a challenge against the background of disabled workers. The changes in a worker's capability have to be regarded in the conception of redesigned and new assembly lines. In this way ergonomics becomes progressively more important in planning and design of vehicles: The objective of ergonomic design in different stages of the vehicles development process is to achieve an optimal adaptation of the assembly work to workers. Hence the ergonomic screening tool "Design Check" (DC) was developed to identify ergonomic deficits in workplace layouts. The screening-tool is based on the current ergonomic state of the art in the design of physical work and relevant EU legal requirements. It was tested within a federal German research project at selected work stations at the assembly lines at Dr.-Ing. h.c. F. Porsche AG / Stuttgart. Meanwhile the application of the screening-tool DC is transferred in other parts of the Porsche AG, Stuttgart. It is also realized as an ergonomic standard method to perform assembly work in different phases of the vehicle development process.

Fundamental Technology Development for Gas-Turbine Engine Health Management

NASA Technical Reports Server (NTRS)

Mercer, Carolyn R.; Simon, Donald L.; Hunter, Gary W.; Arnold, Steven M.; Reveley, Mary S.; Anderson, Lynn M.

2007-01-01

Integrated vehicle health management technologies promise to dramatically improve the safety of commercial aircraft by reducing system and component failures as causal and contributing factors in aircraft accidents. To realize this promise, fundamental technology development is needed to produce reliable health management components. These components include diagnostic and prognostic algorithms, physics-based and data-driven lifing and failure models, sensors, and a sensor infrastructure including wireless communications, power scavenging, and electronics. In addition, system assessment methods are needed to effectively prioritize development efforts. Development work is needed throughout the vehicle, but particular challenges are presented by the hot, rotating environment of the propulsion system. This presentation describes current work in the field of health management technologies for propulsion systems for commercial aviation.

Work injury rehabilitation and the tendency to return to work of workers with injuries in Mainland China.

PubMed

Ouyang, Ya Tao

2008-01-01

This paper aims to describe the current situation of the work injury rehabilitation system in China with its drawbacks, especially relating to the employment services for workers with injuries and bringing up the topic of the need for more work to attempt to construct a modern work injury occupational rehabilitation system: perfecting the administration mechanism of policy, establishing an occupational rehabilitation pattern with Chinese characteristics, establishing the socialization service network as the core of occupational rehabilitation and establishing a practical professional team and academic communication platform. These creative thoughts may shed light on the development of the work injury rehabilitation system as well as the return to work for workers with injuries in China.

Proceedings of the fourth meeting of the International Union of Forest Research Organizations (IUFRO) Working Party S07.02.09: Phytophthoras in forests and natural ecosystems

Treesearch

E.M. Goheen; S.J. Frankel

2009-01-01

The fourth meeting of the International Union of Forest Research Organizations (IUFRO) Working Party S07.02.09, Phytophthoras in Forests and Natural Ecosystems provided a forum for current research on Phytophthora species worldwide. Seventy-eight submissions describing papers and posters on recent developments in Phytophthora diseases of trees and natural ecosystems in...

Spaceport Command and Control System Software Development

NASA Technical Reports Server (NTRS)

Glasser, Abraham

2017-01-01

The Spaceport Command and Control System (SCCS) is the National Aeronautics and Space Administration's (NASA) launch control system for the Orion capsule and Space Launch System, the next generation manned rocket currently in development. This large system requires a large amount of intensive testing that will properly measure the capabilities of the system. Automating the test procedures would save the project money from human labor costs, as well as making the testing process more efficient. Therefore, the Exploration Systems Division (formerly the Electrical Engineering Division) at Kennedy Space Center (KSC) has recruited interns for the past two years to work alongside full-time engineers to develop these automated tests, as well as innovate upon the current automation process.

Turbine Technology Team - An overview of current and planned activities relevant to the National Launch System (NLS)

NASA Technical Reports Server (NTRS)

Griffin, Lisa W.; Huber, Frank W.

1992-01-01

The current status of the activities and future plans of the Turbine Technology Team of the Consortium for Computational Fluid Dynamics is reviewed. The activities of the Turbine Team focus on developing and enhancing codes and models, obtaining data for code validation and general understanding of flows through turbines, and developing and analyzing the aerodynamic designs of turbines suitable for use in the Space Transportation Main Engine fuel and oxidizer turbopumps. Future work will include the experimental evaluation of the oxidizer turbine configuration, the development, analysis, and experimental verification of concepts to control secondary and tip losses, and the aerodynamic design, analysis, and experimental evaluation of turbine volutes.

Agile software development in an earned value world: a survival guide

NASA Astrophysics Data System (ADS)

Kantor, Jeffrey; Long, Kevin; Becla, Jacek; Economou, Frossie; Gelman, Margaret; Juric, Mario; Lambert, Ron; Krughoff, Simon; Swinbank, John D.; Wu, Xiuqin

2016-08-01

Agile methodologies are current best practice in software development. They are favored for, among other reasons, preventing premature optimization by taking a somewhat short-term focus, and allowing frequent replans/reprioritizations of upcoming development work based on recent results and current backlog. At the same time, funding agencies prescribe earned value management accounting for large projects which, these days, inevitably include substantial software components. Earned Value approaches emphasize a more comprehensive and typically longer-range plan, and tend to characterize frequent replans and reprioritizations as indicative of problems. Here we describe the planning, execution and reporting framework used by the LSST Data Management team, that navigates these opposite tensions.

Electromagnetic characteristics of eccentric figure-eight coils for transcranial magnetic stimulation: A numerical study

NASA Astrophysics Data System (ADS)

Kato, Takuya; Sekino, Masaki; Matsuzaki, Taiga; Nishikawa, Atsushi; Saitoh, Youichi; Ohsaki, Hiroyuki

2012-04-01

Repetitive transcranial magnetic stimulation (rTMS) is effective for treatment of several neurological and psychiatric diseases. We proposed an eccentric figure-eight coil, which induces strong eddy currents in the target brain tissue. In this study, numerical analyses were carried out to obtain magnetic field distribution of the eccentric figure-eight coil and eddy current in the brain. The analyses were performed with various coil design parameters, such as the outer and inner diameters and number of turns, to investigate the influence of these parameters on the coil characteristics. Increases in the inner diameter, outer diameter, and number of turns caused increases in the maximum eddy current densities. Coil inductance, working voltage, and heat generation also became higher with the increases in these design parameters. In order to develop a compact stimulator system for use at home, we need to obtain strong eddy current density, keeping the working voltage as low as possible. Our results show that it is effective to enlarge the outer diameter.

Current sheet formation in a sheared force-free-magnetic field. [in sun

NASA Technical Reports Server (NTRS)

Wolfson, Richard

1989-01-01

This paper presents the results of a study showing how continuous shearing motion of magnetic footpoints in a tenuous, infinitely conducting plasma can lead to the development of current sheets, despite the absence of such sheets or even of neutral points in the initial state. The calculations discussed here verify the earlier suggestion by Low and Wolfson (1988) that extended current sheets should form due to the shearing of a force-free quadrupolar magnetic field. More generally, this work augments earlier studies suggesting that the appearance of discontinuities - current sheets - may be a necessary consequence of the topological invariance imposed on the magnetic field geometry of an ideal MHD system by virtue of its infinite conductivity. In the context of solar physics, the work shows how the gradual and continuous motion of magnetic footpoints at the solar photosphere may lead to the buildup of magnetic energy that can then be released explosively when finite conductivity effects become important and lead to the rapid dissipation of current sheets. Such energy release may be important in solar flares, coronal mass ejections, and other eruptive events.

Sri Lanka Wind Farm Analysis and Site Selection Assistance

DOE Office of Scientific and Technical Information (OSTI.GOV)

Young, M.; Vilhauer, R.

2003-08-01

The United States Department of Energy (DOE), through the National Renewable Energy Laboratory (NREL), has been working in partnership with the U.S. Agency for International Development (USAID) in an on-going process to quantify the Sri Lanka wind energy potential and foster wind energy development. Work to date includes completion of the NREL wind atlas for Sri Lanka. In addition, the Ceylon Electricity Board (CEB) has conducted a wind resource assessment of several areas of the country and has successfully completed and is currently operating a 3-MW pilot wind project. A review of the work completed to date indicates that additionalmore » activities are necessary to provide Sri Lanka with the tools necessary to identify the best wind energy development opportunities. In addition, there is a need to identify key policy, regulatory, business and infrastructure issues that affect wind energy development and to recommend steps to encourage and support wind power development and investment.« less

The international development of forensic science standards - A review.

PubMed

Wilson-Wilde, Linzi

2018-04-16

Standards establish specifications and procedures designed to ensure products, services and systems are safe, reliable and consistently perform as intended. Standards can be used in the accreditation of forensic laboratories or facilities and in the certification of products and services. In recent years there have been various international activities aiming at developing forensic science standards and guidelines. The most significant initiative currently underway within the global forensic community is the development of International Organization for Standardization (ISO) standards. This paper reviews the main bodies working on standards for forensic science, the processes used and the implications for accreditation. This paper specifically discusses the work of ISO Technical Committee TC272, the future TC272 work program for the development of forensic science standards and associated timelines. Also discussed, are the lessons learnt to date in navigating the complex environment of multi-country stakeholder deliberations in standards development. Crown Copyright © 2018. Published by Elsevier B.V. All rights reserved.

An experimental study of nonlinear dynamic system identification

NASA Technical Reports Server (NTRS)

Stry, Greselda I.; Mook, D. Joseph

1990-01-01

A technique for robust identification of nonlinear dynamic systems is developed and illustrated using both simulations and analog experiments. The technique is based on the Minimum Model Error optimal estimation approach. A detailed literature review is included in which fundamental differences between the current approach and previous work is described. The most significant feature of the current work is the ability to identify nonlinear dynamic systems without prior assumptions regarding the form of the nonlinearities, in constrast to existing nonlinear identification approaches which usually require detailed assumptions of the nonlinearities. The example illustrations indicate that the method is robust with respect to prior ignorance of the model, and with respect to measurement noise, measurement frequency, and measurement record length.

Rotating Reverse Osmosis for Wastewater Reuse

NASA Technical Reports Server (NTRS)

Lueptow, Richard M.; Yoon, Yeomin; Pederson, Cynthia

2004-01-01

Membrane filtration such as Reverse Osmosis (RO) removes ions, proteins, and organic chemicals which are generally very difficult to remove using conventional treatment. Moreover, membrane is an absolute filtration method, so its treatment efficiency and performance are stable and predictable. We are currently working on the development of rotating RO membrane system. Dynamic rotating membrane filtration, which can produce a high shear rate, may be helpful to obtain high rejection of organic pollutants.The goal of our current work is to improve the flux of the device by increasing pressure by a factor of 3 to 4. In addition, the rejections for a wider variety of inorganic and organic compounds typically found in space mission wastewater are measured.

New approaches for real time decision support systems

NASA Technical Reports Server (NTRS)

Hair, D. Charles; Pickslay, Kent

1994-01-01

NCCOSC RDT&E Division (NRaD) is conducting research into ways of improving decision support systems (DSS) that are used in tactical Navy decision making situations. The research has focused on the incorporation of findings about naturalistic decision-making processes into the design of the DSS. As part of that research, two computer tools were developed that model the two primary naturalistic decision-making strategies used by Navy experts in tactical settings. Current work is exploring how best to incorporate the information produced by those tools into an existing simulation of current Navy decision support systems. This work has implications for any applications involving the need to make decisions under time constraints, based on incomplete or ambiguous data.

Opening up mental health service delivery to cultural diversity: current situation, development and examples from three northern European countries.

PubMed

Bäärnhielm, Sofie; Jávo, Cecilie; Mösko, Mike-Oliver

2013-01-01

There are inequalities in health among migrants and local populations in Europe. Due to migration, Germany, Norway and Sweden have become ethnic culturally diverse nations. There are barriers to mental health care access for refugees, migrants and minorities, and problems with quality of culturally sensitive care in the three countries. This is despite tax-funded health care systems based on equity in service provision. There is a need to develop culturally sensitive mental health services that respond to the increasing diversity of the populations. In this chapter, we will take a closer look at cultural diversity in the countries in question, discuss challenges and give examples of current work to open up mental health services to cultural diversity. The German example will focus on the movement of Interkulturelle Öffnung (cross-cultural opening of the health care system) and work on creating national guidelines and quality standards. From Norway, the work of the National Centre for Mental Health for the indigenous Sámi population will be presented. The Swedish example will focus on the work carried out by the Transcultural Centre. The latter is a competence centre supporting development of culturally sensitive care as an integrated part of the regional health and mental health care system in Stockholm. Finally, the relevance of mental health care for a culturally diverse population, as a part of the larger social project of building tolerant multicultural societies, will be discussed. Copyright © 2013 S. Karger AG, Basel.

Working and caring for a child with chronic illness: A review of current literature.

PubMed

Kish, A M; Newcombe, P A; Haslam, D M

2018-05-01

Advances in medical knowledge have contributed to the increase in the number of children living with some form of long-term chronic illness or condition. As a consequence of these advancements, treatments that are more accessible and easier to administer, usually within a child's home, have been developed. However, this may mean that parents take on greater treatment responsibility and require extra time and energy to meet these tasks, additional to other responsibilities. This review paper aims to summarize and critique existing literature on working parents of children with a chronic condition, by focusing on patterns of parent work, the challenges experienced, and the flow-on consequences to well-being. Employing a narrative, meta-synthesis of the current literature, this review identified 3 key themes related to working parents of children with chronic illness. The paper first identifies that although employment is less common, these parents are not necessarily nonworking. Second, these parents experience numerous challenges including balancing work and family, time constraints, stress, and feelings of "doing it all." And third, the above challenges lead to additional impacts on parental quality of life. This review summarizes what is currently known about work patterns, challenges, and consequences in parents of children with chronic conditions. Employment is clearly impacted for these parents. Although workplace challenges have been extensively researched, other challenges (eg, personal and family) and impacts on their well-being have not. This review discusses the present standing of this research. It outlines the strengths and limitations of the current literature, makes recommendations for future research, and suggests theoretical and practical implications of the further findings. © 2018 John Wiley & Sons Ltd.

Potential Global Partners for Smaller-Scale Contingencies

DTIC Science & Technology

2000-08-01

Current estimates4 suggest there are possibly as many as 32,000 NGOs formed in developed nations (northern hemisphere or global NGOs) that work in...organizations with an international perspective that originate in developed nations. It is important to keep in mind that there are both global and local NGOs...Coordination within the ECOSOC System The UNS includes two key committees that develop policy and effect interagency coordination and cooperation

Data Management Working Group report

NASA Technical Reports Server (NTRS)

Filardo, Edward J.; Smith, David B.

1986-01-01

The current flight qualification program lags technology insertion by 6 to 10 years. The objective is to develop an integrated software engineering and development environment assisted by an expert system technology. An operating system needs to be developed which is portable to the on-board computers of the year 2000. The use of ADA verses a High-Order Language; fault tolerance; fiber optics networks; communication protocols; and security are also examined and outlined.

Clock Technology Development for the Laser Cooling and Atomic Physics (LCAP) Program

NASA Technical Reports Server (NTRS)

Klipstein, W. M.; Thompson, R. J.; Seidel, D. J.; Kohel, J.; Maleki, L.

1998-01-01

The Time and Frequency Sciences and Technology Group at Jet Propulsion Laboratory (JPL) has developed a laser cooling capability for flight and has been selected by NASA to support the Laser-Cooling and Atomic Physics (LCAP) program. Current work in the group includes design and development for tee two laser-cooled atomic clock experiments which have been selected for flight on the International Space Station.

Training Manpower Development Work Supervisors in the Use of Behavior Modification Techniques to Teach Job-Required Skills. Special Report.

ERIC Educational Resources Information Center

Neiswender, Lenore

The paper describes a current research project now being conducted by the Experimental Manpower Laboratory at Mobilization for Youth (MFY-EML) in New York City. The overall objective of the MFY-EML is to develop and test new methods of teaching vocational skills to hard-to-employ youth. The MFY-EML is involved in developing a program to teach…

A squid-based beam current monitor for FAIR/CRYRING

NASA Astrophysics Data System (ADS)

Geithner, Rene; Kurian, Febin; Reeg, Hansjörg; Schwickert, Marcus; Neubert, Ralf; Seidel, Paul; Stöhlker, Thomas

2015-11-01

A SQUID-based beam current monitor was developed for the upcoming FAIR-Project, providing a non-destructive online monitoring of the beam currents in the nA-range. The cryogenic current comparator (CCC) was optimized for lowest possible noise-limited current resolution together with a high system bandwidth. This CCC is foreseen to be installed in the CRYRING facility (CRYRING@ESR: A study group report www.gsi.de/fileadmin/SPARC/documents/Cryring/ReportCryring_40ESR.PDF), working as a test bench for FAIR. In this contribution we present results of the completed CCC for FAIR/CRYRING and also arrangements that have been done for the installation of the CCC at CRYRING, regarding the cryostat design.

Equity and working time: a challenge to achieve.

PubMed

Fischer, Frida Marina; Rotenberg, Lúcia; de Castro Moreno, Claudia Roberta

2004-01-01

Equity is a humanitarian issue that gained strength during the transition from the 20th to the 21st century due to the mounting global discussion and social crisis involving human rights, health, and work. This article aims at (1) introducing the concept of equity as it applies to work environments, particularly to situations involving demanding work schedules, (2) discussing the role of science in equity issues related to work, (3) introducing a new scientific society dedicated to working-time issues, and (4) presenting an overview of new research on working time and health as addressed by the series of manuscripts published in this special issue of Chronobiology International devoted to the XVIth International Symposium on Night and Shiftwork, held in Santos, Brazil, November 2003. The concept of equity has a political as a well as a scientific dimension. Many worldwide organizations, e.g., civil society, academia, and occupational health research institutions, advocate prompt actions toward equity as a strategy to attain sustainable development and to reduce poverty. The analyses of current tendencies in work settings reveal a general situation of disrespect for equity principles, which is expressed by heavy workloads, long work hours, poor work conditions, and deregulation of established labor laws, mainly in (but not restricted to) developing countries. In spite of the great contribution of science in the past five decades, obstacles stand in the way of effectively improving good working conditions, particularly in times of precarious employment. The Working Time Society is a new scientific society that aims at promoting research into working time and health and offers practical advice on how to minimize adverse effects of working hours on workers' health and well-being. An updated view of the research on working times and health includes studies on the relationship between work schedules, worker health, and well-being; effects of night and shiftwork on the internal synchronization of circadian rhythms and laboratory and field interventions; new methods of investigation or new approaches in shift-work studies; and prediction of risks in night and shift work. Current tendencies of work organization contribute to the amplification of inequality across groups and populations, revealing that equity remains a challenge to achieve.

High speed transition prediction

NASA Technical Reports Server (NTRS)

Gasperas, Gediminis

1993-01-01

The main objective of this work period was to develop, maintain and exercise state-of-the-art methods for transition prediction in supersonic flow fields. Basic state and stability codes, acquired during the last work period, were exercised and applied to calculate the properties of various flowfields. The development of a code for the prediction of transition location using a currently novel method (the PSE or Parabolized Stability Equation method), initiated during the last work period and continued during the present work period, was cancelled at mid-year for budgetary reasons. Other activities during this period included the presentation of a paper at the APS meeting in Tallahassee, Florida entitled 'Stability of Two-Dimensional Compressible Boundary Layers', as well as the initiation of a paper co-authored with H. Reed of the Arizona State University entitled 'Stability of Boundary Layers'.

Thermophotovoltaic space power system, phase 3

NASA Technical Reports Server (NTRS)

Horne, W. E.; Lancaster, C.

1987-01-01

Work performed on a research and development program to establish the feasibility of a solar thermophotovoltaic space power generation concept was summarized. The program was multiphased. The earlier work is summarized and the work on the current phase is detailed as it pertains to and extends the earlier work. Much of the experimental hardware and materials development was performed on the internal program. Experimental measurements and data evaluation were performed on the contracted effort. The objectives of the most recent phase were: to examine the thermal control design in order to optimize it for lightweight and low cost; to examine the concentrator optics in an attempt to relieve pointing accuracy requirements to + or - 2 degrees about the optical axis; and to use the results of the thermal and optical studies to synthesize a solar thermophotovoltaic (STPV) module design that is optimized for space application.

Enzymatic desulfurization of coal: Third quarterly report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Marquis, Judith K.; Kitchell, Judith P.

Our current efforts to develop clean coal technology emphasize the advantages of enzymatic desulfurization techniques and have specifically addressed the potential of using partially-purified extracellular microbial enzymes or commercially available enzymes. Our work is focused on the treatment of ''model'' organic sulfur compounds such as dibenzothiophene (DBT) and ethylphenylsulfide (EPS). Furthermore, we are designing experiments to facilitate the enzymatic process by means of a hydrated organic solvent matrix. In this quarter we obtained important results both with the development of our understanding of the enzyme reaction systems and also with the microbial work at Woods Hole. 12 figs., 11 tabs.

Using Qualitative Methods to Evaluate a Family Behavioral Intervention for Type 1 Diabetes

PubMed Central

Herbert, Linda Jones; Sweenie, Rachel; Kelly, Katherine Patterson; Holmes, Clarissa; Streisand, Randi

2013-01-01

Introduction The objectives of this study were to qualitatively evaluate a dyadic adolescent-parent type 1 diabetes (T1D) program developed to prevent deterioration in diabetes care among adolescents with T1D and provide recommendations for program refinement. Method Thirteen adolescent-parent dyads who participated in the larger RCT, the TeamWork Project, were interviewed regarding their perceptions of their participation in the program and current T1D challenges. Interviews were transcribed and coded to establish broad themes. Results Adolescents and parents thought the TeamWork Project sessions were helpful and taught them new information. Five themes catalog findings from the qualitative interviews: TeamWork content, TeamWork structure, transition of responsibility, current and future challenges, and future intervention considerations. Discussion Addressing T1D challenges as a parent-adolescent dyad via a behavioral clinic program is helpful to families during adolescence. Findings highlight the utility of qualitative evaluation to tailor interventions for the unique challenges related to pediatric chronic illness. PMID:24269281

Virtual Archaeodrome for the Archaeological Site from Ulpia Traiana Sarmizegetusa

NASA Astrophysics Data System (ADS)

Angheluţǎ, L. M.; Rǎdvan, R.; Chelmuş, A. I.; Ratoiu, L.; Cortea, I. M.; Ghervase, L.

2017-05-01

This paper presents an ongoing work within a national project regarding the scientific investigation of one of the most important archaeological sites in Romania: Ulpia Traiana Sarmizegetusa. Although the project has many objectives, in this paper we will focus on the development work of a virtual archaeodrome for the archaeological park. In this regard several field campaigns were organized using the ART4ART mobile laboratory for in-situ non-invasive scientific data acquisition and an online instrument for data reporting and visualizing is currently under development. This work represents a case study of several archaeological assets comprising chronologically layered historical studies, high resolution 3D digital models, ground penetrating radar survey and airborne imaging: LIDAR, multispectral and aerial photogrammetry.

NSF/ESF Workshop on Smart Structures and Advanced Sensors, Santorini Island, Greece, June 26-28, 2005: Structural Actuation and Adaptation Working Group

NASA Technical Reports Server (NTRS)

Figueroa, Fernando; Tomizuka, Masayoshi; Bergman, Lawrence; Carpenter, Bernie; Salzano, Carmine; Bairrao, rogerio; Deraemaker, Arnaud; Magonette, Georges; Rodellar, Jose; Kadirkamanathan, Visaken

2005-01-01

This document is a result of discussions that took place during the workshop. It describes current state of research and development (R&D) in the areas of structural actuation and adaptation in the context of smart structures and advanced sensors (SS&AS), and provides an outlook to guide future R&D efforts to develop technologies needed to build SS&AS. The discussions took place among the members of the Structural Actuation and Adaptation Working Group, as well as in general sessions including all four working groups. Participants included members of academia, industry, and government from the US and Europe, and representatives from China, Japan, and Korea.

Supersonic Combustion Research at NASA

NASA Technical Reports Server (NTRS)

Drummond, J. P.; Danehy, Paul M.; Gaffney, Richard L., Jr.; Tedder, Sarah A.; Cutler, Andrew D.; Bivolaru, Daniel

2007-01-01

This paper discusses the progress of work to model high-speed supersonic reacting flow. The purpose of the work is to improve the state of the art of CFD capabilities for predicting the flow in high-speed propulsion systems, particularly combustor flowpaths. The program has several components including the development of advanced algorithms and models for simulating engine flowpaths as well as a fundamental experimental and diagnostic development effort to support the formulation and validation of the mathematical models. The paper will provide details of current work on experiments that will provide data for the modeling efforts along with the associated nonintrusive diagnostics used to collect the data from the experimental flowfield. Simulation of a recent experiment to partially validate the accuracy of a combustion code is also described.

Leveraging the Domain of Work to Improve Migrant Health

PubMed Central

Flynn, Michael A.; Wickramage, Kolitha

2017-01-01

Work is a principal driver of current international migration, a primary social determinant of health, and a fundamental point of articulation between migrants and their host society. Efforts by international organizations to promote migrant health have traditionally focused on infectious diseases and access to healthcare, while international labor organizations have largely focused on issues of occupational health. The underutilization of the domain of work in addressing the health of migrants is truly a missed opportunity for influencing worker well-being and reducing societal economic burden. Understanding of the relationships among migration, work, and health would facilitate further integration of migrant health concerns into the policy agenda of governments and international agencies that work at the nexus of labor, health and development. The domain of work offers an opportunity to capitalize on the existing health and development infrastructure and leverage technical resources, programs and research to promote migrant health. It also provides the opportunity to advance migrant health through new and innovative approaches and partnerships. PMID:29048386

Leveraging the Domain of Work to Improve Migrant Health.

PubMed

Flynn, Michael A; Wickramage, Kolitha

2017-10-19

Work is a principal driver of current international migration, a primary social determinant of health, and a fundamental point of articulation between migrants and their host society. Efforts by international organizations to promote migrant health have traditionally focused on infectious diseases and access to healthcare, while international labor organizations have largely focused on issues of occupational health. The underutilization of the domain of work in addressing the health of migrants is truly a missed opportunity for influencing worker well-being and reducing societal economic burden. Understanding of the relationships among migration, work, and health would facilitate further integration of migrant health concerns into the policy agenda of governments and international agencies that work at the nexus of labor, health and development. The domain of work offers an opportunity to capitalize on the existing health and development infrastructure and leverage technical resources, programs and research to promote migrant health. It also provides the opportunity to advance migrant health through new and innovative approaches and partnerships.

Night shift work and modifiable lifestyle factors.

PubMed

Pepłońska, Beata; Burdelak, Weronika; Krysicka, Jolanta; Bukowska, Agnieszka; Marcinkiewicz, Andrzej; Sobala, Wojciech; Klimecka-Muszyńska, Dorota; Rybacki, Marcin

2014-10-01

Night shift work has been linked to some chronic diseases. Modification of lifestyle by night work may partially contribute to the development of these diseases, nevertheless, so far epidemiological evidence is limited. The aim of the study was to explore association between night shift work and lifestyle factors using data from a cross-sectional study among blue-collar workers employed in industrial plants in Łódź, Poland. The anonymous questionnaire was self-administered among 605 employees (236 women and 369 men, aged 35 or more) - 434 individuals currently working night shifts. Distribution of the selected lifestyle related factors such as smoking, alcohol drinking, physical activity, body mass index (BMI), number of main meals and the hour of the last meal was compared between current, former, and never night shift workers. Adjusted ORs or predicted means were calculated, as a measure of the associations between night shift work and lifestyle factors, with age, marital status and education included in the models as covariates. Recreational inactivity (defined here as less than one hour per week of recreational physical activity) was associated with current night shift work when compared to never night shift workers (OR = 2.43, 95% CI: 1.13-5.22) among men. Alcohol abstinence and later time of the last meal was associated with night shift work among women. Statistically significant positive relationship between night shift work duration and BMI was observed among men (p = 0.029). This study confirms previous studies reporting lower exercising among night shift workers and tendency to increase body weight. This finding provides important public health implication for the prevention of chronic diseases among night shift workers. Initiatives promoting physical activity addressed in particular to the night shift workers are recommended.

Current Driven Instabilities and Anomalous Mobility in Hall-effect Thrusters

NASA Astrophysics Data System (ADS)

Tran, Jonathan; Eckhardt, Daniel; Martin, Robert

2017-10-01

Due to the extreme cost of fully resolving the Debye length and plasma frequency, hybrid plasma simulations utilizing kinetic ions and quasi-steady state fluid electrons have long been the principle workhorse methodology for Hall-effect thruster (HET) modeling. Plasma turbulence and the resulting anomalous electron transport in HETs is a promising candidate for developing predictive models for the observed anomalous transport. In this work, we investigate the implementation of an anomalous electron cross field transport model for hybrid HET simulations such a HPHall. A theory for anomalous transport in HETs and current driven instabilities has been recently studied by Lafleur et al. This work has shown collective electron-wave scattering due to large amplitude azimuthal fluctuations of the electric field. We will further adapt the previous results for related current driven instabilities to electric propulsion relevant mass ratios and conduct a preliminary study of resolving this instability with a modified hybrid (fluid electron and kinetic ion) simulation with the hope of integration with established hybrid HET simulations. This work is supported by the Air Force Office of Scientific Research award FA9950-17RQCOR465.

[Development of pneumoconiosis and outsourcing work in peruvian miners].

PubMed

Cáceres-Mejía, Brenda; Mayta-Tristán, Percy; Pereyra-Elías, Reneé; Collantes, Héctor; Cáceres-Leturia, Walter

2015-10-01

The aim of this study is to evaluate the association between the time of outsourced work and the development of pneumoconiosis in Peruvian miners who attended the "Centro Nacional de Salud Ocupacional y Protección al Ambiente para la Salud" between 2008 and 2011. Retrospective case-control study. Cases were defined as workers diagnosed of pneumoconiosis under standardized criteria. Outsourced work was defined as the time (in months) of work in a company that does not own the primary mining project. The project owner company was registered in the Mining Companies Directory (Ministerio de Energía y Minas). We used multiple logistic regression with crude and adjusted ORs. The study comprised 391 cases and 1519 controls. In both groups, most of the study subjects had a level of education lower than complete high school and were born and currently lived in the Peruvian highlands. There was statistically significant association between more frequency of pneumoconiosis and working 10 or more years in an outsourced company (OR: 1.50; 95%CI: 1.05-1.14; p=0.026). Miners with pneumoconiosis were more likely not to have education (OR: 3.07; 95%CI: 1.55-6.08; p=0.001), be currently living at the Peruvian highlands (OR: 1.40; 95%CI: 1.10-1.78; p=0.007) and to have more than 20 years of underground work history (OR: 8.92; 95%CI: 4.53-18.25; p<0.001). A statistically significant association was found between pneumoconiosis and the time of outsourced work. Not having education, residing in the Peruvian highlands and the time of underground work were associated risk factors.

Automated eddy current analysis of materials

NASA Technical Reports Server (NTRS)

Workman, Gary L.

1990-01-01

This research effort focused on the use of eddy current techniques for characterizing flaws in graphite-based filament-wound cylindrical structures. A major emphasis was on incorporating artificial intelligence techniques into the signal analysis portion of the inspection process. Developing an eddy current scanning system using a commercial robot for inspecting graphite structures (and others) has been a goal in the overall concept and is essential for the final implementation for expert system interpretation. Manual scans, as performed in the preliminary work here, do not provide sufficiently reproducible eddy current signatures to be easily built into a real time expert system. The expert systems approach to eddy current signal analysis requires that a suitable knowledge base exist in which correct decisions as to the nature of the flaw can be performed. In eddy current or any other expert systems used to analyze signals in real time in a production environment, it is important to simplify computational procedures as much as possible. For that reason, we have chosen to use the measured resistance and reactance values for the preliminary aspects of this work. A simple computation, such as phase angle of the signal, is certainly within the real time processing capability of the computer system. In the work described here, there is a balance between physical measurements and finite element calculations of those measurements. The goal is to evolve into the most cost effective procedures for maintaining the correctness of the knowledge base.

The future excess fraction of occupational cancer among those exposed to carcinogens at work in Australia in 2012.

PubMed

Carey, Renee N; Hutchings, Sally J; Rushton, Lesley; Driscoll, Timothy R; Reid, Alison; Glass, Deborah C; Darcey, Ellie; Si, Si; Peters, Susan; Benke, Geza; Fritschi, Lin

2017-04-01

Studies in other countries have generally found approximately 4% of current cancers to be attributable to past occupational exposures. This study aimed to estimate the future burden of cancer resulting from current occupational exposures in Australia. The future excess fraction method was used to estimate the future burden of occupational cancer (2012-2094) among the proportion of the Australian working population who were exposed to occupational carcinogens in 2012. Calculations were conducted for 19 cancer types and 53 cancer-exposure pairings, assuming historical trends and current patterns continued to 2094. The cohort of 14.6 million Australians of working age in 2012 will develop an estimated 4.8 million cancers during their lifetime, of which 68,500 (1.4%) are attributable to occupational exposure in those exposed in 2012. The majority of these will be lung cancers (n=26,000), leukaemias (n=8000), and malignant mesotheliomas (n=7500). A significant proportion of future cancers will result from occupational exposures. This estimate is lower than previous estimates in the literature; however, our estimate is not directly comparable to past estimates of the occupational cancer burden because they describe different quantities - future cancers in currently exposed versus current cancers due to past exposures. The results of this study allow us to determine which current occupational exposures are most important, and where to target exposure prevention. Copyright © 2016 Elsevier Ltd. All rights reserved.

High current, high bandwidth laser diode current driver

NASA Technical Reports Server (NTRS)

Copeland, David J.; Zimmerman, Robert K., Jr.

1991-01-01

A laser diode current driver has been developed for free space laser communications. The driver provides 300 mA peak modulation current and exhibits an optical risetime of less than 400 ps. The current and optical pulses are well behaved and show minimal ringing. The driver is well suited for QPPM modulation at data rates up to 440 Mbit/s. Much previous work has championed current steering circuits; in contrast, the present driver is a single-ended on/off switch. This results in twice the power efficiency as a current steering driver. The driver electrical efficiency for QPPM data is 34 percent. The high speed switch is realized with a Ku-band GaAsFET transistor, with a suitable pre-drive circuit, on a hybrid microcircuit adjacent to the laser diode.

Commonalities in Transportation Fire Safety : Regulations, Research and Development, and Data Bases

DOT National Transportation Integrated Search

1980-01-01

This report presents a comprehensive review of current modal fire safety efforts within the U.S. Department of Transportation. Common fire safety problems and modal administration response are identified. Work completed includes a review of modal adm...

Meaningful Written Communication by Administrators

ERIC Educational Resources Information Center

Keil, Virginia L.; McConnahan, Wendell R.

2006-01-01

Fifty-eight principals participated in this pilot study designed to examine the nature of school administrators' current practices in written communication. Work samples were examined against ISLLC standards that call for competency in facilitating vision, communicating culture and instruction, managing the organization, developing collaboration…

GREENSCOPE: A Method for Modeling Chemical Process Sustainability

EPA Science Inventory

Current work within the U.S. Environmental Protection Agency’s National Risk Management Research Laboratory is focused on the development of a method for modeling chemical process sustainability. The GREENSCOPE methodology, defined for the four bases of Environment, Economics, Ef...

78 FR 27419 - Final Safety Culture Policy Statement

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-10

.... The BSEE appreciates this suggestion and is currently working to develop information sessions and... industries (e.g., Federal Aviation Administration, Nuclear Regulatory Commission, Petroleum Safety Authority... environmental stewardship to a vigorous and respected offshore energy industry. Each and every person involved...

Event Boundaries in Memory and Cognition.

PubMed

Radvansky, Gabriel A; Zacks, Jeffrey M

2017-10-01

Research on event cognition is rapidly developing and is revealing fundamental aspects of human cognition. In this paper, we review recent and current work that is driving this field forward. We first outline the Event Horizon Model, which broadly describes the impact of event boundaries on cognition and memory. Then, we address recent work on event segmentation, the role of event cognition in working memory and long-term memory, including event model updating, and long term retention. Throughout we also consider how event cognition varies across individuals and groups of people and consider the neural mechanisms involved.

[Study of allergic morbidity in children of female workers from various fields of national economy].

PubMed

Khakimova, R F; Dautov, F F; Iusupova, N Z

2007-01-01

To study the factors contributing to the development of allergic disease in children has recently become of current importance. To determine the indirect influence of maternal working environmental factors on allergic morbidity in children, the authors have examined the working conditions and morbidity of female workers engaged in that or that field of national economy and the health status and allergic diseases in children. The variance analysis was made. The proposed guidelines allow one to study the indirect influence of working environmental factors on allergic morbidity in children.

Depot Maintenance: Air Force is Assessing Engine Maintenance Options for Work Currently Performed at Kelly Aviation Center

DTIC Science & Technology

2011-02-11

on TF39 engines, which are typically used for C-5 Galaxy aircraft; T56 engines, which are typically used for C-130 aircraft; and fuel accessories on...conducting separate cost-benefit analyses for the TF39 and T56 engine maintenance work. Under Air Force guidance for depot-level source-of-repair selection...Force has not developed specific risk mitigation plans for the TF39 or T56 engines because it is still assessing how the work will be performed

Adaptive Interface Approach Using a Real Time Biocybernetic System: Control of Hazardous Awareness

NASA Technical Reports Server (NTRS)

Ray, William J.

2002-01-01

The focus of this current grant was to continue our work which focused on the manner in which psychophysiological markers can be used to index hazardous states of awareness and to explore the feasibility of developing on-line systems that utilize real time feedback to modify on-going behavioral processes. In this work we have incorporated a multifaceted approach which includes psychophysiological, subjective, and performance based measures. We have considered this from both an internal and external perspective as reflected in work from a variety of labs.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ryan Hruska

Currently, small Unmanned Aerial Vehicles (UAVs) are primarily used for capturing and down-linking real-time video. To date, their role as a low-cost airborne platform for capturing high-resolution, georeferenced still imagery has not been fully utilized. On-going work within the Unmanned Vehicle Systems Program at the Idaho National Laboratory (INL) is attempting to exploit this small UAV-acquired, still imagery potential. Initially, a UAV-based still imagery work flow model was developed that includes initial UAV mission planning, sensor selection, UAV/sensor integration, and imagery collection, processing, and analysis. Components to support each stage of the work flow are also being developed. Critical tomore » use of acquired still imagery is the ability to detect changes between images of the same area over time. To enhance the analysts’ change detection ability, a UAV-specific, GIS-based change detection system called SADI or System for Analyzing Differences in Imagery is under development. This paper will discuss the associated challenges and approaches to collecting still imagery with small UAVs. Additionally, specific components of the developed work flow system will be described and graphically illustrated using varied examples of small UAV-acquired still imagery.« less

Identifying the role of pre-and postsynaptic GABAB receptors in behavior

PubMed Central

Kasten, Chelsea R.; Boehm, Stephen L.

2015-01-01

Although many reviews exist characterizing the molecular differences of GABAB receptor isoforms, there is no current review of the in vivo effects of these isoforms. The current review focuses on whether the GABAB1a and GABAB1b isoforms contribute differentially to behaviors in isoform knockout mice. The roles of these receptors have primarily been characterized in cognitive, anxiety, and depressive phenotypes. Currently, the field supports a role of GABAB1a in memory maintenance and protection against an anhedonic phenotype, whereas GABAB1b appears to be involved in memory formation and a susceptibility to developing an anhedonic phenotype. Although GABAB receptors have been strongly implicated in drug abuse phenotypes, no isoform-specific work has been done in this field. Future directions include developing site-specific isoform knockdown to identify the role of different brain regions in behavior, as well as identifying how these isoforms are involved in development of behavioral phenotypes. PMID:26283074

The development of a short domain-general measure of working memory capacity.

PubMed

Oswald, Frederick L; McAbee, Samuel T; Redick, Thomas S; Hambrick, David Z

2015-12-01

Working memory capacity is one of the most frequently measured individual difference constructs in cognitive psychology and related fields. However, implementation of complex span and other working memory measures is generally time-consuming for administrators and examinees alike. Because researchers often must manage the tension between limited testing time and measuring numerous constructs reliably, a short and effective measure of working memory capacity would often be a major practical benefit in future research efforts. The current study developed a shortened computerized domain-general measure of working memory capacity by representatively sampling items from three existing complex working memory span tasks: operation span, reading span, and symmetry span. Using a large archival data set (Study 1, N = 4,845), we developed and applied a principled strategy for developing the reduced measure, based on testing a series of confirmatory factor analysis models. Adequate fit indices from these models lent support to this strategy. The resulting shortened measure was then administered to a second independent sample (Study 2, N = 172), demonstrating that the new measure saves roughly 15 min (30%) of testing time on average, and even up to 25 min depending on the test-taker. On the basis of these initial promising findings, several directions for future research are discussed.

Teaching Assessment for Teacher Human Capital Management: Learning from the Current State of the Art. WCER Working Paper No. 2011-2

ERIC Educational Resources Information Center

Milanowski, Anthony T.; Heneman, Herbert G., III; Kimball, Steven M.

2011-01-01

This paper reports on a study of the current state of the art in teaching assessment. The major goal of the study was to examine a sample of assessment systems and then develop a specification for a state-of the art performance assessment system to be used for human capital management functions. The authors hope was that this specification would…