Sample records for current expensive methods

  1. Allocating Practice Expense Under the Medicare Fee Schedule

    PubMed Central

    Pope, Gregory C.; Burge, Russel T.

    1993-01-01

    Currently, relative value units for practice expense are determined under the Medicare fee schedule (MFS) using historical physician charges. This seems inconsistent with the goal of a resource-based fee schedule. A specialty resource-based method of determining practice expense payments is presented and simulated here. The method assumes that, for each service, the payment for practice expense should be the same proportion of the total payment as actual physician practice expenses are of total practice revenues. A comparison with the approach developed by the Physician Payment Review Commission (PPRC) shows similar fees, but the specialty-based method proposed here requires no data beyond what is already employed in the MFS. PMID:10130574

  2. DOE Office of Scientific and Technical Information (OSTI.GOV)

    I. W. Ginsberg

    Multiresolutional decompositions known as spectral fingerprints are often used to extract spectral features from multispectral/hyperspectral data. In this study, the authors investigate the use of wavelet-based algorithms for generating spectral fingerprints. The wavelet-based algorithms are compared to the currently used method, traditional convolution with first-derivative Gaussian filters. The comparison analyses consists of two parts: (a) the computational expense of the new method is compared with the computational costs of the current method and (b) the outputs of the wavelet-based methods are compared with those of the current method to determine any practical differences in the resulting spectral fingerprints. The resultsmore » show that the wavelet-based algorithms can greatly reduce the computational expense of generating spectral fingerprints, while practically no differences exist in the resulting fingerprints. The analysis is conducted on a database of hyperspectral signatures, namely, Hyperspectral Digital Image Collection Experiment (HYDICE) signatures. The reduction in computational expense is by a factor of about 30, and the average Euclidean distance between resulting fingerprints is on the order of 0.02.« less

  3. Development of a method to analyze orthopaedic practice expenses.

    PubMed

    Brinker, M R; Pierce, P; Siegel, G

    2000-03-01

    The purpose of the current investigation was to present a standard method by which an orthopaedic practice can analyze its practice expenses. To accomplish this, a five-step process was developed to analyze practice expenses using a modified version of activity-based costing. In this method, general ledger expenses were assigned to 17 activities that encompass all the tasks and processes typically performed in an orthopaedic practice. These 17 activities were identified in a practice expense study conducted for the American Academy of Orthopaedic Surgeons. To calculate the cost of each activity, financial data were used from a group of 19 orthopaedic surgeons in Houston, Texas. The activities that consumed the largest portion of the employee work force (person hours) were service patients in office (25.0% of all person hours), maintain medical records (13.6% of all person hours), and resolve collection disputes and rebill charges (12.3% of all person hours). The activities that comprised the largest portion of the total expenses were maintain facility (21.4%), service patients in office (16.0%), and sustain business by managing and coordinating practice (13.8%). The five-step process of analyzing practice expenses was relatively easy to perform and it may be used reliably by most orthopaedic practices.

  4. Practice expenses in the MFS (Medicare fee schedule): the service-class approach.

    PubMed

    Latimer, E A; Kane, N M

    1995-01-01

    The practice expense component of the Medicare fee schedule (MFS), which is currently based on historical charges and rewards physician procedures at the expense of cognitive services, is due to be changed by January 1, 1998. The Physician Payment Review Commission (PPRC) and others have proposed microcosting direct costs and allocating all indirect costs on a common basis, such as physician time or work plus direct costs. Without altering the treatment of direct costs, the service-class approach disaggregates indirect costs into six practice function costs. The practice function costs are then allocated to classes of services using cost-accounting and statistical methods. This approach would make the practice expense component more resource-based than other proposed alternatives.

  5. Using quantum chemistry muscle to flex massive systems: How to respond to something perturbing

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Bertoni, Colleen

    Computational chemistry uses the theoretical advances of quantum mechanics and the algorithmic and hardware advances of computer science to give insight into chemical problems. It is currently possible to do highly accurate quantum chemistry calculations, but the most accurate methods are very computationally expensive. Thus it is only feasible to do highly accurate calculations on small molecules, since typically more computationally efficient methods are also less accurate. The overall goal of my dissertation work has been to try to decrease the computational expense of calculations without decreasing the accuracy. In particular, my dissertation work focuses on fragmentation methods, intermolecular interactionsmore » methods, analytic gradients, and taking advantage of new hardware.« less

  6. Large Scale Reduction of Graphite Oxide Project

    NASA Technical Reports Server (NTRS)

    Calle, Carlos; Mackey, Paul; Falker, John; Zeitlin, Nancy

    2015-01-01

    This project seeks to develop an optical method to reduce graphite oxide into graphene efficiently and in larger formats than currently available. Current reduction methods are expensive, time-consuming or restricted to small, limited formats. Graphene has potential uses in ultracapacitors, energy storage, solar cells, flexible and light-weight circuits, touch screens, and chemical sensors. In addition, graphite oxide is a sustainable material that can be produced from any form of carbon, making this method environmentally friendly and adaptable for in-situ reduction.

  7. A Process for Reviewing and Evaluating Generated Test Items

    ERIC Educational Resources Information Center

    Gierl, Mark J.; Lai, Hollis

    2016-01-01

    Testing organization needs large numbers of high-quality items due to the proliferation of alternative test administration methods and modern test designs. But the current demand for items far exceeds the supply. Test items, as they are currently written, evoke a process that is both time-consuming and expensive because each item is written,…

  8. 45 CFR 2528.30 - What steps are necessary to use an education award to pay all or part of the current educational...

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... to pay all or part of the current educational expenses at an institution of higher education? 2528.30... award to pay all or part of the current educational expenses at an institution of higher education? (a... educational expenses at an institution of higher education, the Corporation must receive— (1) An individual's...

  9. 45 CFR 2528.30 - What steps are necessary to use an education award to pay all or part of the current educational...

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... to pay all or part of the current educational expenses at an institution of higher education? 2528.30... award to pay all or part of the current educational expenses at an institution of higher education? (a... educational expenses at an institution of higher education, the Corporation must receive— (1) An individual's...

  10. 45 CFR 2528.30 - What steps are necessary to use an education award to pay all or part of the current educational...

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... to pay all or part of the current educational expenses at an institution of higher education? 2528.30... award to pay all or part of the current educational expenses at an institution of higher education? (a... educational expenses at an institution of higher education, the Corporation must receive— (1) An individual's...

  11. 45 CFR 2528.30 - What steps are necessary to use an education award to pay all or part of the current educational...

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... to pay all or part of the current educational expenses at an institution of higher education? 2528.30... award to pay all or part of the current educational expenses at an institution of higher education? (a... educational expenses at an institution of higher education, the Corporation must receive— (1) An individual's...

  12. 45 CFR 2528.30 - What steps are necessary to use an education award to pay all or part of the current educational...

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... to pay all or part of the current educational expenses at an institution of higher education? 2528.30... award to pay all or part of the current educational expenses at an institution of higher education? (a... educational expenses at an institution of higher education, the Corporation must receive— (1) An individual's...

  13. A rapid spectrophotometric method to determine B-carotene content in Cucumis melo germplasm

    USDA-ARS?s Scientific Manuscript database

    The compound B -carotene is the predominant carotenoid in cantaloupe. Because of its antioxidant properties and health benefits, B-carotene content in fruits and vegetables is of interest to the food industry. Current methods to assay B-carotene content in fruit are time consuming, expensive and u...

  14. Estimation of toxicity using the Toxicity Estimation Software Tool (TEST)

    EPA Science Inventory

    Tens of thousands of chemicals are currently in commerce, and hundreds more are introduced every year. Since experimental measurements of toxicity are extremely time consuming and expensive, it is imperative that alternative methods to estimate toxicity are developed.

  15. Conservation, Preservation, and Digitization.

    ERIC Educational Resources Information Center

    Lynch, Clifford A.; Brownrigg, Edwin B.

    1986-01-01

    Digital technologies should be considered a method of preservation for library materials. Current conservation strategies of restoration, deacidification, and microfilming are expensive, and they limit access. Digitization offers improved access while preserving materials and reflects a change in the library role from depository of printed…

  16. Use of less expensive cigarettes in six cities in China: findings from the International Tobacco Control (ITC) China Survey

    PubMed Central

    Hyland, Andrew; Fong, Geoffrey T; Jiang, Yuan; Elton-Marshall, Tara

    2010-01-01

    Objective The existence of less expensive cigarettes in China may undermine public health. The aim of the current study is to examine the use of less expensive cigarettes in six cities in China. Methods Data was from the baseline wave of the International Tobacco Control (ITC) China Survey of 4815 adult urban smokers in 6 cities, conducted between April and August 2006. The percentage of smokers who reported buying less expensive cigarettes (the lowest pricing tertile within each city) at last purchase was computed. Complex sample multivariate logistic regression models were used to identify factors associated with use of less expensive cigarettes. The association between the use of less expensive cigarettes and intention to quit smoking was also examined. Results Smokers who reported buying less expensive cigarettes at last purchase tended to be older, heavier smokers, to have lower education and income, and to think more about the money spent on smoking in the last month. Smokers who bought less expensive cigarettes at the last purchase and who were less knowledgeable about the health harm of smoking were less likely to intend to quit smoking. Conclusions Measures need to be taken to minimise the price differential among cigarette brands and to increase smokers' health knowledge, which may in turn increase their intentions to quit. PMID:20935199

  17. A screening approach using zebrafish for the detection and characterization of developmental neurotoxicity.

    EPA Science Inventory

    Thousands of chemicals have little or no data to support developmental neurotoxicity risk assessments. Current developmental neurotoxicity guideline studies mandating mammalian model systems are expensive and time consuming. Therefore a rapid, cost-effective method to assess de...

  18. Expert Systems In Medical Studies - A New Twist

    NASA Astrophysics Data System (ADS)

    Slagle, James R.; Long, John M.; Wick, Michael R.; Matts, John P.; Leon, Arthur S.

    1986-03-01

    The use of experts to evaluate large amounts of trial data results in increasingly expensive and time consuming research. We are investigating the role expert systems can play in reducing the time and expense of research projects. Current methods in large clinical studies for evaluating data are often crude and superficial. We have developed, for a large clinical trial, an expert system for analysis of treadmill exercise ECG test results. In the cases we are studying, a patient is given a treadmill exercise ECG test once a year for five years. Pairs of these exercise tests are then evaluated by cardiologists to determine the condition of the patient's heart. The results of our system show great promise for the use of expert systems in reducing the time and expense of large clinical trials.

  19. Development of a pungency measuring system for red-pepper powder

    USDA-ARS?s Scientific Manuscript database

    Capsaicinoids are the main components that determine the spiciness level of red-pepper powders. Current pungency measurement is mostly dependent on HPLC measurement technique, which is a sample-destructive, labor-intensive, time-consuming, and expensive method. In this research, a nondestructive on-...

  20. Silo-stored pistachios at varying humidity levels produce distinct volatile biomarkers

    USDA-ARS?s Scientific Manuscript database

    Aflatoxin contamination in California tree nuts results in millions of dollars of lost product annually. The current method for detection of aflatoxin is destructive, expensive and time-intensive. Previous studies have demonstrated that volatile profiles of fungal-contaminated tissues are different ...

  1. Review and evaluation of models that produce trip tables from ground counts : interim report.

    DOT National Transportation Integrated Search

    1996-01-01

    This research effort was motivated by the desires of planning agencies to seek alternative methods of deriving current or base year Origin-Destination (O-D) trip tables without adopting conventional O-D surveys that are expensive, time consuming and ...

  2. Characterization of Human Neural Progenitor Cell Models for Developmental Neurotoxicity Screening

    EPA Science Inventory

    Current testing methods for developmental neurotoxicity (DNT) make evaluation of the effects of large numbers of chemicals impractical and prohibitively expensive. As such, we are evaluating two different human neural progenitor cell (hNPC) models for their utility in screens for...

  3. Travel Expenses in Connection with Tax-Deductible Education Expenses

    ERIC Educational Resources Information Center

    Bottiglieri, William A.; Reville, Patrick J.

    2012-01-01

    Trade or business expenses are deductible if they are ordinary and necessary with respect to the trade or business in which they were incurred. Treasury Regulations bring education expenses into this purview but only if they maintain or improve skills already acquired or allow a taxpayer to maintain his current position. Related travel expenses in…

  4. Enhancing contrast of fingerprints on plastic tape.

    PubMed

    Steele, Charles A; Ball, Mikki S

    2003-11-01

    Many of the currently available fingerprinting methods have limited ability to visualize fingerprints on plastic tape without expensive equipment or significant handling of the sample. This is especially true for visualizing fingerprints on black electrical tape. This study sought a hands-off method to produce easy visualization of fingerprints on different types of plastic tape, including black electrical tape, without the need for expensive equipment. The methods selected were to sublime disperse dyes into the tape, both with and without the fuming of cyanoacrylate, everywhere except for where the fingerprint was applied. The resulting color contrasts provided enough differentiation to visualize fingerprints on plastic tape under ambient light. Sequential fuming with cyanoacrylate followed by disperse dyes provided the best visualizations on all tapes, and cyanoacrylate followed by disperse yellow 211 clearly visualized fingerprints on black electrical tape.

  5. 41 CFR 302-7.304 - When HHG are shipped under the actual expense method, and PBP&E as an administrative expense, in...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...-TRANSPORTATION AND TEMPORARY STORAGE OF HOUSEHOLD GOODS AND PROFESSIONAL BOOKS, PAPERS, AND EQUIPMENT (PBP&E) Agency Responsibilities § 302-7.304 When HHG are shipped under the actual expense method, and PBP&E as an... under the actual expense method, and PBP&E as an administrative expense, in the same lot, are separate...

  6. Non-destructive testing of composite materials used in military applications by eddy current thermography method

    NASA Astrophysics Data System (ADS)

    Swiderski, Waldemar

    2016-10-01

    Eddy current thermography is a new NDT-technique for the detection of cracks in electro conductive materials. It combines the well-established inspection techniques of eddy current testing and thermography. The technique uses induced eddy currents to heat the sample being tested and defect detection is based on the changes of induced eddy currents flows revealed by thermal visualization captured by an infrared camera. The advantage of this method is to use the high performance of eddy current testing that eliminates the known problem of the edge effect. Especially for components of complex geometry this is an important factor which may overcome the increased expense for inspection set-up. The paper presents the possibility of applying eddy current thermography method for detecting defects in ballistic covers made of carbon fiber reinforced composites used in the construction of military vehicles.

  7. A Disposable Microfluidic Device with a Screen Printed Electrode for Mimicking Phase II Metabolism

    PubMed Central

    Vasiliadou, Rafaela; Nasr Esfahani, Mohammad Mehdi; Brown, Nathan J.; Welham, Kevin J.

    2016-01-01

    Human metabolism is investigated using several in vitro methods. However, the current methodologies are often expensive, tedious and complicated. Over the last decade, the combination of electrochemistry (EC) with mass spectrometry (MS) has a simpler and a cheaper alternative to mimic the human metabolism. This paper describes the development of a disposable microfluidic device with a screen-printed electrode (SPE) for monitoring phase II GSH reactions. The proposed chip has the potential to be used as a primary screening tool, thus complementing the current in vitro methods. PMID:27598162

  8. Manufacturing Methods & Technology Project Execution Report. First CY 83.

    DTIC Science & Technology

    1983-11-01

    UCCURRENCE. H 83 5180 MMT FOR METAL DEWAR AND UNBONDED LEADS THE GOLD WIRE BONDED CONNECTIOkS ARE MADE BY HAND WHICH IS A TEDIOUS AND EXPENSIVE PROCESS. THE...ATTACHMENTS CURRENT FILAMENT WOUND COMPOSIIE ROCKET MOTOR CASES REQUIRE FORGED METAL POLE PIECESt NOZZLE CLOSURE ATTACHMENT RINGS, AND OTHER ATTACHMENT RINGS... ELASTOMER INSULATOR PROCESS LARGE TACTICAL ROCKET MOTOR INSULATORS ARE COSTLY, LACK DESIGN CHANGE FLEXIBILITY AND SUFFER LONG LEAD TIMES. CURRENT

  9. Evaluation on expansive performance of the expansive soil using electrical responses

    NASA Astrophysics Data System (ADS)

    Chu, Ya; Liu, Songyu; Bate, Bate; Xu, Lei

    2018-01-01

    Light structures, such as highways and railroads, built on expansive soils are prone to damages from the swelling of their underlain soil layers. Considerable amount of research has been conducted to characterize the swelling properties of expansive soils. Current swell characterization models, however, are limited by lack of standardized tests. Electrical methods are non-destructive, and are faster and less expensive than the traditional geotechnical methods. Therefore, geo-electrical methods are attractive for defining soil characteristics, including the swelling behavior. In this study, comprehensive laboratory experiments were undertaken to measure the free swelling and electrical resistivity of the mixtures of commercial kaolinite and bentonite. The electrical conductivity of kaolinite-bentonite mixtures was measured by a self-developed four-electrode soil resistivity box. Increasing the free swelling rate of the kaolinite-bentonite mixtures (0.72 to 1 of porosity of soils samples) led to a reduction in the electrical resistivity and an increase in conductivity. A unique relationship between free swelling rate and normalized surface conductivity was constructed for expensive soils by eliminating influences of porosity and m exponent. Therefore, electrical response measurement can be used to characterize the free swelling rate of expensive soils.

  10. Net News--Old Wine in a New Bottle?

    ERIC Educational Resources Information Center

    Bredon, George

    1999-01-01

    Observes that instructors may not use news items extensively as a source of assigned materials because of the cost incurred in their procurement. Argues that the Internet provides a much less expensive and wider pool of current resources for instructors. Reviews traditional paper and new electronic newsclip production methods. (DSK)

  11. Low-cost camera modifications and methodologies for very-high-resolution digital images

    USDA-ARS?s Scientific Manuscript database

    Aerial color and color-infrared photography are usually acquired at high altitude so the ground resolution of the photographs is < 1 m. Moreover, current color-infrared cameras and manned aircraft flight time are expensive, so the objective is the development of alternative methods for obtaining ve...

  12. Differentiation of volatile profiles of stockpiled almonds at varying relative humidity levels using benchtop and portable GC-MS

    USDA-ARS?s Scientific Manuscript database

    Contamination by aflatoxin, a toxic metabolite produced by Aspergillus fungi ubiquitous in California almond and pistachio orchards, results in millions of dollars of lost product annually. Current detection of aflatoxin relies on destructive, expensive and time-intensive laboratory-based methods. T...

  13. A SHORT-TERM REPRODUCTION TEST WITH THE FATHEAD MINNOW (PIMEPHALES PROMELAS): L METHODS DESCRIPTION

    EPA Science Inventory

    Due to the time and expense associated with full life-cycle testing, most current toxicity tests with fish do not explicity consider reproductive output as an endpoint but, rather, focus on early life-stage survival and development. However, there are classes of chemicals that co...

  14. RAPID PCR-BASED MONITORING OF INFECTIOUS ENTEROVIRUSES IN DRINKING WATER. (R824756)

    EPA Science Inventory

    Abstract

    Currently, the standard method for the detection of enteroviruses and hepatitis A virus in water involves cell culture assay which is expensive and time consuming. Direct RT-PCR offers a rapid and sensitive alternative to virus detection but sensitivity is oft...

  15. Current applications of GPR in forest research

    Treesearch

    John Butnor; Kurt Johnsen; Lisa Samuelson; Michele Pruyn

    2009-01-01

    Forests, both naturally regenerated stands and plantations are complex, long-lived systems, which can be difficult to assess and monitor over time. This is especially true of belowground biomass and internal features of trees which are inaccessible except by destructive sampling. Traditional methods are expensive, destructive, time-consuming, usually yield a small...

  16. Current Treatment of Lower Gastrointestinal Hemorrhage

    PubMed Central

    Raphaeli, Tal; Menon, Raman

    2012-01-01

    Massive lower gastrointestinal bleeding is a significant and expensive problem that requires methodical evaluation, management, and treatment. After initial resuscitation, care should be taken to localize the site of bleeding. Once localized, lesions can then be treated with endoscopic or angiographic interventions, reserving surgery for ongoing or recurrent bleeding. PMID:24294124

  17. Heat analysis of thermal overload relays using 3-D finite element method

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Kawase, Yoshihiro; Ichihashi, Takayuki; Ito, Shokichi

    1999-05-01

    In designing a thermal overload relay, it is necessary to analyze thermal characteristics of several trial models. Up to now, this has been done by measuring the temperatures on a number of positions in the trial models. This experimental method is undoubtedly expensive. In this paper, the temperature distribution of a thermal overload relay is obtained by using 3-D finite element analysis taking into account the current distribution in current-carrying conductors. It is shown that the 3-D analysis is capable of evaluating a new design of thermal overload relays.

  18. Two-phase computerized planning of cryosurgery using bubble-packing and force-field analogy.

    PubMed

    Tanaka, Daigo; Shimada, Kenji; Rabin, Yoed

    2006-02-01

    Cryosurgery is the destruction of undesired tissues by freezing, as in prostate cryosurgery, for example. Minimally invasive cryosurgery is currently performed by means of an array of cryoprobes, each in the shape of a long hypodermic needle. The optimal arrangement of the cryoprobes, which is known to have a dramatic effect on the quality of the cryoprocedure, remains an art held by the cryosurgeon, based on the cryosurgeon's experience and "rules of thumb." An automated computerized technique for cryosurgery planning is the subject matter of the current paper, in an effort to improve the quality of cryosurgery. A two-phase optimization method is proposed for this purpose, based on two previous and independent developments by this research team. Phase I is based on a bubble-packing method, previously used as an efficient method for finite element meshing. Phase II is based on a force-field analogy method, which has proven to be robust at the expense of a typically long runtime. As a proof-of-concept, results are demonstrated on a two-dimensional case of a prostate cross section. The major contribution of this study is to affirm that in many instances cryosurgery planning can be performed without extremely expensive simulations of bioheat transfer, achieved in Phase I. This new method of planning has proven to reduce planning runtime from hours to minutes, making automated planning practical in a clinical time frame.

  19. High bandwidth magnetically isolated signal transmission circuit

    NASA Technical Reports Server (NTRS)

    Repp, John Donald (Inventor)

    2005-01-01

    Many current electronic systems incorporate expensive or sensitive electrical components. Because electrical energy is often generated or transmitted at high voltages, the power supplies to these electronic systems must be carefully designed. Power supply design must ensure that the electrical system being supplied with power is not exposed to excessive voltages or currents. In order to isolate power supplies from electrical equipment, many methods have been employed. These methods typically involve control systems or signal transfer methods. However, these methods are not always suitable because of their drawbacks. The present invention relates to transmitting information across an interface. More specifically, the present invention provides an apparatus for transmitting both AC and DC information across a high bandwidth magnetic interface with low distortion.

  20. A practical method to rapidly dissolve metallic stents.

    PubMed

    Bradshaw, Scott H; Kennedy, Lloyd; Dexter, David F; Veinot, John P

    2009-01-01

    Metallic stents are commonly used in many clinical applications including peripheral vascular disease intervention, biliary obstruction, endovascular repair of aneurysms, and percutaneous coronary interventions. In the examination of vascular stent placement, it is important to determine if the stent is open or has become obstructed. This is increasingly important in the era of drug-eluting stent usage in coronary arteries. We describe a practical, rapid and cost-effective method to dissolve most metallic stents leaving the vascular and luminal tissues intact. This practical method may replace the laborious and expensive plastic embedding methods currently utilized.

  1. 26 CFR 1.904-5 - Look-through rules as applied to controlled foreign corporations and other entities.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... look-through characterization of such dividend cannot reasonably be determined based on the available... hundred dollars ($100) of S's income is subpart F income taxed currently to P under section 951(a)(1)(A... income method of apportioning interest expense is elected, related person interest shall be apportioned...

  2. The use of hoop nets seeded with mature brook trout to capture conspecifics

    Treesearch

    James A. Lamansky; Ernest R. Keeley; Michael K. Young; Kevin A. Meyer

    2009-01-01

    The brook trout Salvelinus fontinalis, a native of eastern North America, is considered an invasive species in the western United States because it has been implicated in the decline of many native trout species there. Current methods for controlling brook trout are usually time-consuming and expensive and are sometimes harmful to nontarget species....

  3. EVALUATION OF HUMAN NEURAL PROGENITOR CELLS FOR DEVELOPMENTAL NEUROTOXICITY SCREENING: TIME COURSE OF EFFECTS ON CELL PROLIFERATION AND VIABILITY.

    EPA Science Inventory

    Current testing methods for developmental neurotoxicity (DNT) make evaluation of the effects of large numbers of chemicals impractical and prohibitively expensive. As such, we are evaluating human neural progenitor cells (NPCs) as a screen for DNT. ReNcell CX (ReN CX) cells are a...

  4. 17 CFR 256.152 - Fuel stock expenses undistributed.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 17 Commodity and Securities Exchanges 3 2010-04-01 2010-04-01 false Fuel stock expenses... (CONTINUED) UNIFORM SYSTEM OF ACCOUNTS FOR MUTUAL SERVICE COMPANIES AND SUBSIDIARY SERVICE COMPANIES, PUBLIC UTILITY HOLDING COMPANY ACT OF 1935 3. Current and Accrued Assets § 256.152 Fuel stock expenses...

  5. Survey on the Assessment of the Current Actual Expenses Incurred by Students on the Meals and Accommodation within and around the Campuses: The Case of Tanzania Higher Education Students' Loans Beneficiaries

    ERIC Educational Resources Information Center

    Nyahende, Veronica R.; Bangu, Asangye N.; Chakaza, Benedicto C.

    2015-01-01

    This Survey analyses the current actual expenses incurred by students on the meals and accommodation within and around the campuses. The study was geared towards achieving the following objectives: (i) to examine the current cost incurred by a students for meals In Campus, (ii) to examine the current cost incurred by a students for accommodation…

  6. Two-phase Computerized Planning of Cryosurgery Using Bubble-packing and Force-field Analogy

    PubMed Central

    Tanaka, Daigo; Shimada, Kenji; Rabin, Yoed

    2007-01-01

    Background: Cryosurgery is the destruction of undesired tissues by freezing, as in prostate cryosurgery, for example. Minimally-invasive cryosurgery is currently performed by means of an array of cryoprobes, each in the shape of a long hypodermic needle. The optimal arrangement of the cryoprobes, which is known to have a dramatic effect on the quality of the cryoprocedure, remains an art held by the cryosurgeon, based on the cryosurgeon's experience and “rules of thumb.” An automated computerized technique for cryosurgery planning is the subject matter of the current report, in an effort to improve the quality of cryosurgery. Method of Approach: A two-phase optimization method is proposed for this purpose, based on two previous and independent developments by this research team. Phase I is based on a bubble-packing method, previously used as an efficient method for finite elements meshing. Phase II is based on a force-field analogy method, which has proven to be robust at the expense of a typically long runtime. Results: As a proof-of-concept, results are demonstrated on a 2D case of a prostate cross-section. The major contribution of this study is to affirm that in many instances cryosurgery planning can be performed without extremely expensive simulations of bioheat transfer, achieved in Phase I. Conclusions: This new method of planning has proven to reduce planning runtime from hours to minutes, making automated planning practical in a clinical time frame. PMID:16532617

  7. Improving finite element results in modeling heart valve mechanics.

    PubMed

    Earl, Emily; Mohammadi, Hadi

    2018-06-01

    Finite element analysis is a well-established computational tool which can be used for the analysis of soft tissue mechanics. Due to the structural complexity of the leaflet tissue of the heart valve, the currently available finite element models do not adequately represent the leaflet tissue. A method of addressing this issue is to implement computationally expensive finite element models, characterized by precise constitutive models including high-order and high-density mesh techniques. In this study, we introduce a novel numerical technique that enhances the results obtained from coarse mesh finite element models to provide accuracy comparable to that of fine mesh finite element models while maintaining a relatively low computational cost. Introduced in this study is a method by which the computational expense required to solve linear and nonlinear constitutive models, commonly used in heart valve mechanics simulations, is reduced while continuing to account for large and infinitesimal deformations. This continuum model is developed based on the least square algorithm procedure coupled with the finite difference method adhering to the assumption that the components of the strain tensor are available at all nodes of the finite element mesh model. The suggested numerical technique is easy to implement, practically efficient, and requires less computational time compared to currently available commercial finite element packages such as ANSYS and/or ABAQUS.

  8. Executing effective road safety advertising: are big production budgets necessary?

    PubMed

    Donovan, R J; Jalleh, G; Henley, N

    1999-05-01

    Twelve (12) road safety television commercials (TVCs) ranging in production costs from $A15,000 to $A250,000 (current prices) were evaluated using standard advertising pre-test procedures. The twelve ads covered four road safety behaviours (speeding; drink driving; fatigue; and inattention), and included a variety of executional types within and across behaviours. One ad in each of the four behaviours was an expensive TAC and ($A200,000 or more). The testing procedure assessed respondents' self-reported impact of the ad on their future intentions to comply with the road safety behavior advocated in the ad. Just under 1000 appropriately screened motor vehicle drivers license holders were recruited via street intercept methods and randomly allocated to one of the twelve and exposure conditions. The results showed that while the two best performing ads were highly dramatic TAC ads showing graphic crash scenes, these were also the most expensive ads to produce, and, being 60 and 90 s, the most expensive to air. In several cases, 30 s low cost talking heads testimonials performed equally as well as their far more expensive counterparts. We conclude that big production budgets may not be necessary to create effective road safety advertising.

  9. A new method for wireless video monitoring of bird nests

    Treesearch

    David I. King; Richard M. DeGraaf; Paul J. Champlin; Tracey B. Champlin

    2001-01-01

    Video monitoring of active bird nests is gaining popularity among researchers because it eliminates many of the biases associated with reliance on incidental observations of predation events or use of artificial nests, but the expense of video systems may be prohibitive. Also, the range and efficiency of current video monitoring systems may be limited by the need to...

  10. Planning for solar access

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Heckeroth, S.; McLees, C.

    1997-12-31

    Land use planning is often no more than a strategy for getting the most economic value from a given piece of land while attempting to minimize the expense of mitigating environmental impacts. Because conventional fuels are currently inexpensive, development takes place with little consideration for energy efficiency or solar access. By identifying sites with solar access now, planners and building designers can assure that the south facing roofs and walls of future buildings will receive the solar energy necessary to satisfy the energy needs of their occupants. Planner Ian McHarg outlined scientific methods to map natural determinants including geology, hydrology,more » wildlife, soils, climate, as well as social determinants like population density, energy consumption, and transportation patterns in the late 60s. Overlays of these hand plotted maps gave planners a method of finding the most suitable sites for identified needs but were cost prohibitive for most projects. The affordability of studies done on high speed computers now allows general application of McHargian planning methods. At the time McHarg was developing his planning theory photovoltaics were so expensive their use was restricted to government projects. The low cost of heating with fossil fuels made solar heating expensive by comparison. Today advances in solar technology have made solar electricity and heating competitive with non-renewable energy resources. This paper will show how McHargian planning methods can be effectively used in conjunction with Geographic Information Systems (GIS) to include efficiency and renewable energy access in land use decision making.« less

  11. Sterilization in the United States

    PubMed Central

    Bartz, Deborah; Greenberg, James A

    2008-01-01

    Unintended pregnancies are expensive for patients and for society in terms of medical costs, the cost of caring for more children, and the cost to personal and professional goals. Sterilization is the most common contraceptive method utilized by couples in the United States. Given technological advances over the past few decades, male and female surgical sterilization has become a safe, convenient, easy, and highly effective birth control method for the long term. This article reviews current male and female sterilization options. PMID:18701927

  12. An Additional Approach to Model Current Followers and Amplifiers with Electronically Controllable Parameters from Commercially Available ICs

    NASA Astrophysics Data System (ADS)

    Sotner, R.; Kartci, A.; Jerabek, J.; Herencsar, N.; Dostal, T.; Vrba, K.

    2012-12-01

    Several behavioral models of current active elements for experimental purposes are introduced in this paper. These models are based on commercially available devices. They are suitable for experimental tests of current- and mixed-mode filters, oscillators, and other circuits (employing current-mode active elements) frequently used in analog signal processing without necessity of onchip fabrication of proper active element. Several methods of electronic control of intrinsic resistance in the proposed behavioral models are discussed. All predictions and theoretical assumptions are supported by simulations and experiments. This contribution helps to find a cheaper and more effective way to preliminary laboratory tests without expensive on-chip fabrication of special active elements.

  13. Reimbursement and costs of pediatric ambulatory diabetes care by using the resource-based relative value scale: is multidisciplinary care financially viable?

    PubMed

    Melzer, Sanford M; Richards, Gail E; Covington, Maxine L

    2004-09-01

    The ambulatory care for children with diabetes mellitus (DM) within an endocrinology specialty practice typically includes services provided by a multidisciplinary team. The resource-based relative value scale (RBRVS) is increasingly used to determine payments for ambulatory services in pediatrics. It is not known to what extent resource-based practice expenses and physician work values as allocated through the RBRVS for physician and non-physician practice expenses cover the actual costs of multidisciplinary ambulatory care for children with DM. A pediatric endocrinology and diabetes clinic staffed by faculty physicians and hospital support staff in a children's hospital. Data from a faculty practice plan billing records and income and expense reports during the period from 1 July 2000 to 30 June 2001 were used to determine endocrinologist physician ambulatory productivity, revenue collection, and direct expenses (salary, benefits, billing, and professional liability (PLI)). Using the RBRVS, ambulatory care revenue was allocated between physician, PLI, and practice expenses. Applying the activity-based costing (ABC) method, activity logs were used to determine non-physician and facility practice expenses associated with endocrine (ENDO) or diabetes visits. Of the 4735 ambulatory endocrinology visits, 1420 (30%) were for DM care. Physicians generated $866,582 in gross charges. Cash collections of 52% of gross charges provided revenue of $96 per visit. Using the actual Current Procedural Terminology (CPT)-4 codes reported for these services and the RBRVS system, the revenue associated with the 13,007 total relative value units (TRVUs) produced was allocated, with 58% going to cover physician work expenses and 42% to cover non-physician practice salary, facility, and PLI costs. Allocated revenue of $40.60 per visit covered 16 and 31% of non-physician and facility practice expenses per DM and general ENDO visit, respectively. RBRVS payments ($35/RVU) covered 46% of all expenses ($76.74/RVU), including 132% of physician expenses for the time worked in the clinic ($27/RVU), and only 23% of actual incurred practice expenses ($152/TRVU). Clinical revenues in a pediatric endocrinology practice, allocated by using the RBRVS system, do cover physician expenses for the time spent working in a hospital ENDO and DM clinic, but do not closely approximate non-physician and facility practice expenses while delivering multidisciplinary care to children with DM. Using payment based on the RBRVS system, and without additional payments to compensate for increased practice expenses incurred in the delivery of multidisciplinary care, this care model may not be financially viable.

  14. Evaluation of a rapid diagnostic field test kit for identification of Phytophthora ramorum, P. kernoviae and other Phytophthora species at the point of inspection

    Treesearch

    C.R. Lane; E. Hobden; L. Laurenson; V.C. Barton; K.J.D. Hughes; H. Swan; N. Boonham; A.J. Inman

    2008-01-01

    Plant health regulations to prevent the introduction and spread of Phytophthora ramorum and P. kernoviae require rapid, cost effective diagnostic methods for screening large numbers of plant samples at the time of inspection. Current on-site techniques require expensive equipment, considerable expertise and are not suited for plant...

  15. Development of a photo guide for fuels in the Southern Appalachian Mountains of Northeast Georgia and Western South Carolina

    Treesearch

    Sandra Rideout-Hanzak; Lucy Brudnak; Thomas A. Waldrop

    2006-01-01

    Current methods of assessing the characteristics of forest fuels are time-consuming, expensive, and impractical in the mountainous terrain of the southeastern United States. A photo guide to fuels is being developed. It will be a quick, inexpensive, and easy-to-use tool for various management applications in the Southern Appalachian Mountains. Fuels data and photos...

  16. 26 CFR 1.162-6 - Professional expenses.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... expenses. A professional man may claim as deductions the cost of supplies used by him in the practice of... the hire of office assistance. Amounts currently paid or accrued for books, furniture, and...

  17. 41 CFR 302-11.306 - How can I know if my expenses are reasonable and will be reimbursed by the Government?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... TRANSACTION ALLOWANCES 11-ALLOWANCES FOR EXPENSES INCURRED IN CONNECTION WITH RESIDENCE TRANSACTIONS Request... locality in which your expenses will be incurred and request: (a) The current schedule of closing costs... and practices with respect to charging of closing costs which relate to either your sale or purchase...

  18. 47 CFR 36.341 - Cable and wire facilities expenses-Account 6410 (Class B telephone companies); Accounts 6411...

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 47 Telecommunication 2 2010-10-01 2010-10-01 false Cable and wire facilities expenses-Account 6410... Operating Expenses and Taxes Cable and Wire Facilities Expenses § 36.341 Cable and wire facilities expenses... network cable, aerial wire, and conduit systems. (b) The general method of separating cable and wire...

  19. 47 CFR 36.341 - Cable and wire facilities expenses-Account 6410 (Class B telephone companies); Accounts 6411...

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 47 Telecommunication 2 2011-10-01 2011-10-01 false Cable and wire facilities expenses-Account 6410... Operating Expenses and Taxes Cable and Wire Facilities Expenses § 36.341 Cable and wire facilities expenses... network cable, aerial wire, and conduit systems. (b) The general method of separating cable and wire...

  20. Etching-free patterning method for electrical characterization of atomically thin MoSe2 films grown by chemical vapor deposition

    NASA Astrophysics Data System (ADS)

    Utama, M. Iqbal Bakti; Lu, Xin; Zhan, Da; Ha, Son Tung; Yuan, Yanwen; Shen, Zexiang; Xiong, Qihua

    2014-10-01

    Patterning two-dimensional materials into specific spatial arrangements and geometries is essential for both fundamental studies of materials and practical applications in electronics. However, the currently available patterning methods generally require etching steps that rely on complicated and expensive procedures. We report here a facile patterning method for atomically thin MoSe2 films using stripping with an SU-8 negative resist layer exposed to electron beam lithography. Additional steps of chemical and physical etching were not necessary in this SU-8 patterning method. The SU-8 patterning was used to define a ribbon channel from a field effect transistor of MoSe2 film, which was grown by chemical vapor deposition. The narrowing of the conduction channel area with SU-8 patterning was crucial in suppressing the leakage current within the device, thereby allowing a more accurate interpretation of the electrical characterization results from the sample. An electrical transport study, enabled by the SU-8 patterning, showed a variable range hopping behavior at high temperatures.Patterning two-dimensional materials into specific spatial arrangements and geometries is essential for both fundamental studies of materials and practical applications in electronics. However, the currently available patterning methods generally require etching steps that rely on complicated and expensive procedures. We report here a facile patterning method for atomically thin MoSe2 films using stripping with an SU-8 negative resist layer exposed to electron beam lithography. Additional steps of chemical and physical etching were not necessary in this SU-8 patterning method. The SU-8 patterning was used to define a ribbon channel from a field effect transistor of MoSe2 film, which was grown by chemical vapor deposition. The narrowing of the conduction channel area with SU-8 patterning was crucial in suppressing the leakage current within the device, thereby allowing a more accurate interpretation of the electrical characterization results from the sample. An electrical transport study, enabled by the SU-8 patterning, showed a variable range hopping behavior at high temperatures. Electronic supplementary information (ESI) available: Further experiments on patterning and additional electrical characterizations data. See DOI: 10.1039/c4nr03817g

  1. Application of Terahertz Radiation to the Detection of Corrosion Under the Shuttle's Thermal Protection System

    NASA Astrophysics Data System (ADS)

    Madaras, Eric I.; Anastasi, Robert F.; Smith, Stephen W.; Seebo, Jeffrey P.; Walker, James L.; Lomness, Janice K.; Hintze, Paul E.; Kammerer, Catherine C.; Winfree, William P.; Russell, Richard W.

    2008-02-01

    There is currently no method for detecting corrosion under Shuttle tiles except for the expensive process of tile removal and replacement; hence NASA is investigating new NDE methods for detecting hidden corrosion. Time domain terahertz radiation has been applied to corrosion detection under tiles in samples ranging from small lab samples to a Shuttle with positive results. Terahertz imaging methods have been able to detect corrosion at thicknesses of 5 mils or greater under 1" thick Shuttle tiles and 7-12 mils or greater under 2" thick Shuttle tiles.

  2. Application of Terahertz Radiation to the Detection of Corrosion under the Shuttle's Thermal Protection System

    NASA Technical Reports Server (NTRS)

    Madaras, Eric I.; Anastasi, Robert F.; Smith, Stephen W.; Seebo, Jeffrey P.; Walker, James L.; Lomness, Janice K.; Hintze, Paul E.; Kammerer, Catherine C.; Winfree, William P.; Russell, Richard W.

    2007-01-01

    There is currently no method for detecting corrosion under Shuttle tiles except for the expensive process of tile removal and replacement; hence NASA is investigating new NDE methods for detecting hidden corrosion. Time domain terahertz radiation has been applied to corrosion detection under tiles in samples ranging from small lab samples to a Shuttle with positive results. Terahertz imaging methods have been able to detect corrosion at thicknesses of 5 mils or greater under 1" thick Shuttle tiles and 7-12 mils or greater under 2" thick Shuttle tiles.

  3. Current trends in health insurance systems: OECD countries vs. Japan.

    PubMed

    Sasaki, Toshiyuki; Izawa, Masahiro; Okada, Yoshikazu

    2015-01-01

    Over the past few decades, the longest extension in life expectancy in the world has been observed in Japan. However, the sophistication of medical care and the expansion of the aging society, leads to continuous increase in health-care costs. Medical expenses as a part of gross domestic product (GDP) in Japan are exceeding the current Organization for Economic Co-operation and Development (OECD) average, challenging the universally, equally provided low cost health care existing in the past. A universal health insurance system is becoming a common system currently in developed countries, currently a similar system is being introduced in the United States. Medical care in Japan is under a social insurance system, but the injection of public funds for medical costs becomes very expensive for the Japanese society. In spite of some urgently decided measures to cover the high cost of advanced medical treatment, declining birthrate and aging population and the tendency to reduce hospital and outpatients' visits numbers and shorten hospital stays, medical expenses of Japan continue to be increasing.

  4. Current Canadian initiatives to reimburse live organ donors for their non-medical expenses.

    PubMed

    Vlaicu, Sorina; Klarenbach, Scott; Yang, Robert C; Dempster, Todd; Garg, Amit X

    2007-01-01

    Living organ donors frequently incur non-medical expenses for travel, accommodation, prescription drugs, loss of income, and child care in conjunction with organ donation. Despite international precedent and widespread public support, Canada currently lacks a unified strategy to reimburse donors for these expenses. In 2005, we communicated with 78 individuals within the field of Canadian transplantation to identify which initiatives for reimbursement of living donors existed in each province. Saskatchewan was the only province in which public employees were granted paid leave for organ donation. Six provincial governments partially reimbursed travel and accommodation. At the federal level, other expenses could be partially reimbursed through an income tax credit, while the Employment Insurance program and the Canada Pension Plan provided funding for donors who become unemployed or develop long-term disability as a result of donation. Charities helped a limited number of patients in financial need through grants and no-interest loans, but funding was generally limited by contributions received. While reimbursing living donors for their non-medical expenses is considered just, existing programs only partially reimburse expenses and are not available in all provinces. Developing future reimbursement policies will remove a disincentive faced by some potential donors, and may increase rates of transplantation in Canada.

  5. CO2 Capture Using Electric Fields: Low-Cost Electrochromic Film on Plastic for Net-Zero Energy Building

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    None

    2010-01-01

    Broad Funding Opportunity Announcement Project: Two faculty members at Lehigh University created a new technique called supercapacitive swing adsorption (SSA) that uses electrical charges to encourage materials to capture and release CO2. Current CO2 capture methods include expensive processes that involve changes in temperature or pressure. Lehigh University’s approach uses electric fields to improve the ability of inexpensive carbon sorbents to trap CO2. Because this process uses electric fields and not electric current, the overall energy consumption is projected to be much lower than conventional methods. Lehigh University is now optimizing the materials to maximize CO2 capture and minimize themore » energy needed for the process.« less

  6. Overcoming Geometry-Induced Stiffness with IMplicit-Explicit (IMEX) Runge-Kutta Algorithms on Unstructured Grids with Applications to CEM, CFD, and CAA

    NASA Technical Reports Server (NTRS)

    Kanevsky, Alex

    2004-01-01

    My goal is to develop and implement efficient, accurate, and robust Implicit-Explicit Runge-Kutta (IMEX RK) methods [9] for overcoming geometry-induced stiffness with applications to computational electromagnetics (CEM), computational fluid dynamics (CFD) and computational aeroacoustics (CAA). IMEX algorithms solve the non-stiff portions of the domain using explicit methods, and isolate and solve the more expensive stiff portions using implicit methods. Current algorithms in CEM can only simulate purely harmonic (up to lOGHz plane wave) EM scattering by fighter aircraft, which are assumed to be pure metallic shells, and cannot handle the inclusion of coatings, penetration into and radiation out of the aircraft. Efficient MEX RK methods could potentially increase current CEM capabilities by 1-2 orders of magnitude, allowing scientists and engineers to attack more challenging and realistic problems.

  7. Synthetic Self-Healing Methods

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Bello, Mollie

    Given enough time, pressure, temperature fluctuation, and stress any material will fail. Currently, synthesized materials make up a large part of our everyday lives, and are used in a number of important applications such as; space travel, under water devices, precise instrumentation, transportation, and infrastructure. Structural failure of these material scan lead to expensive and dangerous consequences. In an attempt to prolong the life spans of specific materials and reduce efforts put into repairing them, biologically inspired, self-healing systems have been extensively investigated. The current review explores recent advances in three methods of synthesized self-healing: capsule based, vascular, and intrinsic.more » Ideally, self-healing materials require no human intervention to promote healing, are capable of surviving all the steps of polymer processing, and heal the same location repeatedly. Only the vascular method holds up to all of these idealities.« less

  8. Active landslide monitoring using remote sensing data, GPS measurements and cameras on board UAV

    NASA Astrophysics Data System (ADS)

    Nikolakopoulos, Konstantinos G.; Kavoura, Katerina; Depountis, Nikolaos; Argyropoulos, Nikolaos; Koukouvelas, Ioannis; Sabatakakis, Nikolaos

    2015-10-01

    An active landslide can be monitored using many different methods: Classical geotechnical measurements like inclinometer, topographical survey measurements with total stations or GPS and photogrammetric techniques using airphotos or high resolution satellite images. As the cost of the aerial photo campaign and the acquisition of very high resolution satellite data is quite expensive the use of cameras on board UAV could be an identical solution. Small UAVs (Unmanned Aerial Vehicles) have started their development as expensive toys but they currently became a very valuable tool in remote sensing monitoring of small areas. The purpose of this work is to demonstrate a cheap but effective solution for an active landslide monitoring. We present the first experimental results of the synergistic use of UAV, GPS measurements and remote sensing data. A six-rotor aircraft with a total weight of 6 kg carrying two small cameras has been used. Very accurate digital airphotos, high accuracy DSM, DGPS measurements and the data captured from the UAV are combined and the results are presented in the current study.

  9. The prediction of airborne and structure-borne noise potential for a tire

    NASA Astrophysics Data System (ADS)

    Sakamoto, Nicholas Y.

    Tire/pavement interaction noise is a major component of both exterior pass-by noise and vehicle interior noise. The current testing methods for ranking tires from loud to quiet require expensive equipment, multiple tires, and/or long experimental set-up and run times. If a laboratory based off-vehicle test could be used to identify the airborne and structure-borne potential of a tire from its dynamic characteristics, a relative ranking of a large group of tires could be performed at relatively modest expense. This would provide a smaller sample set of tires for follow-up testing and thus save expense for automobile OEMs. The focus of this research was identifying key noise features from a tire/pavement experiment. These results were compared against a stationary tire test in which the natural response of the tire to a forced input was measured. Since speed was identified as having some effect on the noise, an input function was also developed to allow the tires to be ranked at an appropriate speed. A relative noise model was used on a second sample set of tires to verify if the ranking could be used against interior vehicle measurements. While overall level analysis of the specified spectrum had mixed success, important noise generating features were identified, and the methods used could be improved to develop a standard off-vehicle test to predict a tire's noise potential.

  10. Lithium Battery Transient Response as a Diagnostic Tool

    NASA Astrophysics Data System (ADS)

    Denisov, E.; Nigmatullin, R.; Evdokimov, Y.; Timergalina, G.

    2018-05-01

    Lithium batteries are currently used as the main energy storage for electronic devices. Progress in the field of portable electronic devices is significantly determined by the improvement of their weight/dimensional characteristics and specific capacity. In addition to the high reliability required of lithium batteries, in some critical applications proper diagnostics are required. Corresponding techniques allow prediction and prevention of operation interruption and avoidance of expensive battery replacement, and also provide additional benefits. Many effective diagnostic methods have been suggested; however, most of them require expensive experimental equipment, as well as interruption or strong perturbation of the operating mode. In the framework of this investigation, a simple diagnostic method based on analysis of transient processes is proposed. The transient response is considered as a reaction to an applied load variation that typically corresponds to normal operating conditions for most real applications. The transient response contains the same information as the impedance characteristic for the system operating in linear mode. Taking into account the large number of publications describing the impedance response associated with diagnostic methods, it can be assumed that the transient response contains a sufficient amount of information for creation of effective diagnostic systems. The proposed experimental installation is based on a controlled load, providing current variation, measuring equipment, and data processing electronics. It is proposed to use the second exponent parameters U 2 and β to estimate the state of charge for secondary lithium batteries. The proposed method improves the accuracy and reliability of a set of quantitative parameters associated with electrochemical energy sources.

  11. 11 CFR 106.5 - Allocation of expenses between federal and non-federal activities by national party committees.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... national party committees; (iii) Methods for allocation of administrative expenses, costs of generic voter... 11 Federal Elections 1 2010-01-01 2010-01-01 false Allocation of expenses between federal and non... COMMISSION GENERAL ALLOCATIONS OF CANDIDATE AND COMMITTEE ACTIVITIES § 106.5 Allocation of expenses between...

  12. 41 CFR 302-7.301 - What method of transporting HHG should we authorize?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...-TRANSPORTATION AND TEMPORARY STORAGE OF HOUSEHOLD GOODS AND PROFESSIONAL BOOKS, PAPERS, AND EQUIPMENT (PBP&E... actual expense method, unless that method is more economical to the Government and results in a savings... shipments OCONUS and where deemed economical to the Government within CONUS. Under the actual expense method...

  13. 41 CFR 301-51.201 - What is the maximum amount that my agency may advance?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... transaction expenses The estimated amount of your cash transaction expenses. (For M&IE, your advance is limited to the M&IE rate under the lodgings-plus per diem method.) Non-cash transaction expenses (See... non-cash transaction expenses for an individual trip (or not to exceed a 45-day period for an open...

  14. 12 CFR 611.1255 - Exit fee calculation.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... statements, as of the termination date, must be independently audited by a qualified public accountant. (4.... Related expenses include, but are not limited to, legal services, accounting services, tax services... of current and deferred tax expenses, if any, due to the termination. (iii) Add to assets the dollar...

  15. 78 FR 38808 - Proposed Collection; Comment Request for Regulation Project

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-06-27

    ... 1995, Public Law 104-13 (44 U.S.C. 3506(c)(2)(A)). Currently, the IRS is soliciting comments concerning employee business expenses reporting and withholding on employee business expense reimbursements and... through the internet, at [email protected] . SUPPLEMENTARY INFORMATION: Title: Employee Business...

  16. Current Trends in Health Insurance Systems: OECD Countries vs. Japan

    PubMed Central

    SASAKI, Toshiyuki; IZAWA, Masahiro; OKADA, Yoshikazu

    2015-01-01

    Over the past few decades, the longest extension in life expectancy in the world has been observed in Japan. However, the sophistication of medical care and the expansion of the aging society, leads to continuous increase in health-care costs. Medical expenses as a part of gross domestic product (GDP) in Japan are exceeding the current Organization for Economic Co-operation and Development (OECD) average, challenging the universally, equally provided low cost health care existing in the past. A universal health insurance system is becoming a common system currently in developed countries, currently a similar system is being introduced in the United States. Medical care in Japan is under a social insurance system, but the injection of public funds for medical costs becomes very expensive for the Japanese society. In spite of some urgently decided measures to cover the high cost of advanced medical treatment, declining birthrate and aging population and the tendency to reduce hospital and outpatients’ visits numbers and shorten hospital stays, medical expenses of Japan continue to be increasing. PMID:25797778

  17. Superconducting accelerator cavity with a heat affected zone having a higher RRR

    DOEpatents

    Brawley, John; Phillips, H. Lawrence

    2000-01-01

    An improved method for welding accelerator cavities without the need for time consuming and expensive faying surface treatments comprising electron beam welding such cavities in a vacuum welding chamber within a vacuum envelope and using the following welding parameters: a beam voltage of between about 45 KV and 55 KV; a beam current between about 38 ma and 47 ma; a weld speed of about 15 cm/min; and a sharp focus and a rhombic raster of between about 9 KHz and 10 Khz. A welded cavity made according to the method of the present invention is also described.

  18. Sensing the deadliest toxin: technologies for botulinum neurotoxin detection.

    PubMed

    Capek, Petr; Dickerson, Tobin J

    2010-01-01

    Sensitive and rapid detection of botulinum neurotoxins (BoNTs), the most poisonous substances known to date, is essential for studies of medical applications of BoNTs and detection of poisoned food, as well as for response to potential bioterrorist threats. Currently, the most common method of BoNT detection is the mouse bioassay. While this assay is sensitive, it is slow, quite expensive, has limited throughput and requires sacrificing animals. Herein, we discuss and compare recently developed alternative in vitro detection methods and assess their ability to supplement or replace the mouse bioassay in the analysis of complex matrix samples.

  19. Efficient Radiative Transfer for Dynamically Evolving Stratified Atmospheres

    NASA Astrophysics Data System (ADS)

    Judge, Philip G.

    2017-12-01

    We present a fast multi-level and multi-atom non-local thermodynamic equilibrium radiative transfer method for dynamically evolving stratified atmospheres, such as the solar atmosphere. The preconditioning method of Rybicki & Hummer (RH92) is adopted. But, pressed for the need of speed and stability, a “second-order escape probability” scheme is implemented within the framework of the RH92 method, in which frequency- and angle-integrals are carried out analytically. While minimizing the computational work needed, this comes at the expense of numerical accuracy. The iteration scheme is local, the formal solutions for the intensities are the only non-local component. At present the methods have been coded for vertical transport, applicable to atmospheres that are highly stratified. The probabilistic method seems adequately fast, stable, and sufficiently accurate for exploring dynamical interactions between the evolving MHD atmosphere and radiation using current computer hardware. Current 2D and 3D dynamics codes do not include this interaction as consistently as the current method does. The solutions generated may ultimately serve as initial conditions for dynamical calculations including full 3D radiative transfer. The National Center for Atmospheric Research is sponsored by the National Science Foundation.

  20. Detection of heavy metal by paper-based microfluidics.

    PubMed

    Lin, Yang; Gritsenko, Dmitry; Feng, Shaolong; Teh, Yi Chen; Lu, Xiaonan; Xu, Jie

    2016-09-15

    Heavy metal pollution has shown great threat to the environment and public health worldwide. Current methods for the detection of heavy metals require expensive instrumentation and laborious operation, which can only be accomplished in centralized laboratories. Various microfluidic paper-based analytical devices have been developed recently as simple, cheap and disposable alternatives to conventional ones for on-site detection of heavy metals. In this review, we first summarize current development of paper-based analytical devices and discuss the selection of paper substrates, methods of device fabrication, and relevant theories in these devices. We then compare and categorize recent reports on detection of heavy metals using paper-based microfluidic devices on the basis of various detection mechanisms, such as colorimetric, fluorescent, and electrochemical methods. To finalize, the future development and trend in this field are discussed. Copyright © 2016 Elsevier B.V. All rights reserved.

  1. 18 CFR 35.24 - Tax normalization for public utilities.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... the Natural Gas Act. (7) Tax effect means the tax reduction or addition associated with a specific... purposes; (v) Differences that arise from recognition of research, development, and demonstration... purchased gas costs as a current expense for tax purposes but as a deferred expense for book purposes. (See...

  2. Parental Participation Fees in School Expenses in Israel

    ERIC Educational Resources Information Center

    Shaked, Haim

    2016-01-01

    Purpose: Many countries throughout the world provide all children with free education. However, sometimes there are user charges in publically funded schools worldwide. The purpose of this paper is to explore parental participation fees in school expenses in Israel, depicting the current situation and analyzing its implications.…

  3. [Cost analysis of home care with activity-based costing (ABC)].

    PubMed

    Lee, Su-Jeong

    2004-10-01

    This study was carried out to substantiate the application process of activity-based costing on the current cost of hospital home care (HHC) service. The study materials were documents, 120 client charts, health insurance demand bills, salary of 215 HHC nurses, operating expense, 6 HHC agencies, and 31 HHC nurses. The research was carried out by analyzing the HHC activities and then collecting labor and operating expenses. For resource drivers, HHC activity performance time and workload were studied. For activity drivers, the number of HHC activity performances and the activity number of visits were studied. The HHC activities were classified into 70 activities. In resource, the labor cost was 245 won per minute, operating cost was 9,570 won per visit and traffic expense was an average of 12,750 won. In resource drivers, education and training had the longest time of 67 minutes. Average length of performance for activities was 13.7 minutes. The workload was applied as a relative value. The average cost of HHC was 62,741 won and the cost ranged from 55,560 won to 74,016 won. The fixed base rate for a visit in the current HHC medical fee should be increased. Exclusion from the current fee structure or flexible operation of traveling expenses should be reviewed.

  4. Financial impact of nursing professionals staff required in an Intensive Care Unit 1

    PubMed Central

    de Araújo, Thamiris Ricci; Menegueti, Mayra Gonçalves; Auxiliadora-Martins, Maria; Castilho, Valéria; Chaves, Lucieli Dias Pedreschi; Laus, Ana Maria

    2016-01-01

    ABSTRACT Objective: to calculate the cost of the average time of nursing care spent and required by patients in the Intensive Care Unit (ICU) and the financial expense for the right dimension of staff of nursing professionals. Method: a descriptive, quantitative research, using the case study method, developed in adult ICU patients. We used the workload index - Nursing Activities Score; the average care time spent and required and the amount of professionals required were calculated using equations and from these data, and from the salary composition of professionals and contractual monthly time values, calculated the cost of direct labor of nursing. Results: the monthly cost of the average quantity of available professionals was US$ 35,763.12, corresponding to 29.6 professionals, and the required staff for 24 hours of care is 42.2 nurses, with a monthly cost of US$ 50,995.44. Conclusion: the numerical gap of nursing professionals was 30% and the monthly financial expense for adaptation of the structure is US$ 15,232.32, which corresponds to an increase of 42.59% in the amounts currently paid by the institution. PMID:27878219

  5. Microbial Degradation of Petroleum Hydrocarbon Contaminants: An Overview

    PubMed Central

    Das, Nilanjana; Chandran, Preethy

    2011-01-01

    One of the major environmental problems today is hydrocarbon contamination resulting from the activities related to the petrochemical industry. Accidental releases of petroleum products are of particular concern in the environment. Hydrocarbon components have been known to belong to the family of carcinogens and neurotoxic organic pollutants. Currently accepted disposal methods of incineration or burial insecure landfills can become prohibitively expensive when amounts of contaminants are large. Mechanical and chemical methods generally used to remove hydrocarbons from contaminated sites have limited effectiveness and can be expensive. Bioremediation is the promising technology for the treatment of these contaminated sites since it is cost-effective and will lead to complete mineralization. Bioremediation functions basically on biodegradation, which may refer to complete mineralization of organic contaminants into carbon dioxide, water, inorganic compounds, and cell protein or transformation of complex organic contaminants to other simpler organic compounds by biological agents like microorganisms. Many indigenous microorganisms in water and soil are capable of degrading hydrocarbon contaminants. This paper presents an updated overview of petroleum hydrocarbon degradation by microorganisms under different ecosystems. PMID:21350672

  6. Extending Strong Scaling of Quantum Monte Carlo to the Exascale

    NASA Astrophysics Data System (ADS)

    Shulenburger, Luke; Baczewski, Andrew; Luo, Ye; Romero, Nichols; Kent, Paul

    Quantum Monte Carlo is one of the most accurate and most computationally expensive methods for solving the electronic structure problem. In spite of its significant computational expense, its massively parallel nature is ideally suited to petascale computers which have enabled a wide range of applications to relatively large molecular and extended systems. Exascale capabilities have the potential to enable the application of QMC to significantly larger systems, capturing much of the complexity of real materials such as defects and impurities. However, both memory and computational demands will require significant changes to current algorithms to realize this possibility. This talk will detail both the causes of the problem and potential solutions. Sandia National Laboratories is a multi-mission laboratory managed and operated by Sandia Corp, a wholly owned subsidiary of Lockheed Martin Corp, for the US Department of Energys National Nuclear Security Administration under contract DE-AC04-94AL85000.

  7. Novel Method for Reliable Identification of Siccibacter and Franconibacter Strains: from “Pseudo-Cronobacter” to New Enterobacteriaceae Genera

    PubMed Central

    Vlach, Jiří; Junková, Petra; Karamonová, Ludmila; Blažková, Martina; Fukal, Ladislav

    2017-01-01

    ABSTRACT In the last decade, strains of the genera Franconibacter and Siccibacter have been misclassified as first Enterobacter and later Cronobacter. Because Cronobacter is a serious foodborne pathogen that affects premature neonates and elderly individuals, such misidentification may not only falsify epidemiological statistics but also lead to tests of powdered infant formula or other foods giving false results. Currently, the main ways of identifying Franconibacter and Siccibacter strains are by biochemical testing or by sequencing of the fusA gene as part of Cronobacter multilocus sequence typing (MLST), but in relation to these strains the former is generally highly difficult and unreliable while the latter remains expensive. To address this, we developed a fast, simple, and most importantly, reliable method for Franconibacter and Siccibacter identification based on intact-cell matrix-assisted laser desorption ionization–time of flight mass spectrometry (MALDI-TOF MS). Our method integrates the following steps: data preprocessing using mMass software; principal-component analysis (PCA) for the selection of mass spectrum fingerprints of Franconibacter and Siccibacter strains; optimization of the Biotyper database settings for the creation of main spectrum projections (MSPs). This methodology enabled us to create an in-house MALDI MS database that extends the current MALDI Biotyper database by including Franconibacter and Siccibacter strains. Finally, we verified our approach using seven previously unclassified strains, all of which were correctly identified, thereby validating our method. IMPORTANCE We show that the majority of methods currently used for the identification of Franconibacter and Siccibacter bacteria are not able to properly distinguish these strains from those of Cronobacter. While sequencing of the fusA gene as part of Cronobacter MLST remains the most reliable such method, it is highly expensive and time-consuming. Here, we demonstrate a cost-effective and reliable alternative that correctly distinguishes between Franconibacter, Siccibacter, and Cronobacter bacteria and identifies Franconibacter and Siccibacter at the species level. Using intact-cell MALDI-TOF MS, we extend the current MALDI Biotyper database with 11 Franconibacter and Siccibacter MSPs. In addition, the use of our approach is likely to lead to a more reliable identification scheme for Franconibacter and Siccibacter strains and, consequently, a more trustworthy epidemiological picture of their involvement in disease. PMID:28455327

  8. 75 FR 40029 - Proposed Collection; Comment Request for Regulation Project

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-07-13

    ... Reduction Act of 1995, Public Law 104-13 (44 U.S.C. 3506(c)(2)(A)). Currently, the IRS is soliciting comments concerning an existing final and temporary regulations, EE-113-90 (TD 8324), Employee Business Expenses Reporting and Withholding on Employee Business Expense Reimbursements and Allowances (Sec. 1.62-2...

  9. Evaluation of immunoturbidimetric rheumatoid factor method from Diagam on Abbott c8000 analyzer: comparison with immunonephelemetric method.

    PubMed

    Dupuy, Anne Marie; Hurstel, Rémy; Bargnoux, Anne Sophie; Badiou, Stéphanie; Cristol, Jean Paul

    2014-01-01

    Rheumatoid factor (RF) consists of autoantibodies and because of its heterogeneity its determination is not easy. Currently, nephelometry and Elisa method are considered as reference methods. Due to consolidation, many laboratories have fully automated turbidimetric apparatus, and specific nephelemetric systems are not always available. In addition, nephelemetry is more accurate, but time consuming, expensive, and requires a specific device, resulting in a lower efficiency. Turbidimetry could be an attractive alternative. The turbidimetric RF test from Diagam meets the requirements of accuracy and precision for optimal clinical use, with an acceptable measuring range, and could be an alternative in the determination of RF, without the associated cost of a dedicated instrument, making consolidation and saving blood possible.

  10. 11 CFR 106.4 - Allocation of polling expenses.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 11 Federal Elections 1 2010-01-01 2010-01-01 false Allocation of polling expenses. 106.4 Section... ACTIVITIES § 106.4 Allocation of polling expenses. (a) The purchase of opinion poll results by a candidate or... cost allocation formula of the polling firm from which the results are purchased. Under this method the...

  11. Assessing present and future capital expense levels under PPS.

    PubMed

    Cleverley, W O

    1986-09-01

    The expected shift in the method of payment for capital costs will affect the way decisions are made by hospital executives. The capital expense ratio model is one way executives can better assess their present and future capital expense levels as payments begin to be made under a prospective payment system.

  12. 78 FR 29439 - Proposed Information Collection (Request for Details of Expenses) Activity: Comment Request

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-05-20

    ... correspondence. During the comment period, comments may be viewed online through the FDMS. FOR FURTHER... techniques or the use of other forms of information technology. Title: Request for Details of Expenses, VA... current rate of pension. Pension is an income-based program, and the payable rate depends on the claimant...

  13. 75 FR 45205 - Proposed Information Collection (Request for Details of Expenses) Activity: Comment Request

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-08-02

    ... correspondence. During the comment period, comments may be viewed online through the FDMS. FOR FURTHER... techniques or the use of other forms of information technology. Title: Request for Details of Expenses, VA... current rate of pension. Pension is an income-based program, and the payable rate depends on the claimant...

  14. 26 CFR 1.861-13T - Transition rules for interest expenses (temporary regulations).

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ...-in fraction is the general phase-in amount over the current year average debt level of the affiliated... pro rata by the relative amount of interest expense that is directly allocated. (b) General phase-in... does not exceed the general phase-in amount, as defined in paragraph (b)(2) of this section. (2...

  15. 26 CFR 1.861-13T - Transition rules for interest expenses (temporary regulations).

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ...-in fraction is the general phase-in amount over the current year average debt level of the affiliated... pro rata by the relative amount of interest expense that is directly allocated. (b) General phase-in... does not exceed the general phase-in amount, as defined in paragraph (b)(2) of this section. (2...

  16. The pediatric intensive care unit business model.

    PubMed

    Schleien, Charles L

    2013-06-01

    All pediatric intensivists need a primer on ICU finance. The author describes potential alternate revenue sources for the division. Differentiating units by size or academic affiliation, the author describes drivers of expense. Strategies to manage the bottom line including negotiations for hospital services are covered. Some of the current trends in physician productivity and its described metrics, with particular focus on clinical FTE management is detailed. Methods of using this data to enhance revenue are discussed. Some of the other current trends in the ICU business related to changes at the federal and state level as well as in the insurance sector, moving away from fee-for-service are covered. Copyright © 2013 Elsevier Inc. All rights reserved.

  17. Automated inspection of turbine blades: Challenges and opportunities

    NASA Technical Reports Server (NTRS)

    Mehta, Manish; Marron, Joseph C.; Sampson, Robert E.; Peace, George M.

    1994-01-01

    Current inspection methods for complex shapes and contours exemplified by aircraft engine turbine blades are expensive, time-consuming and labor intensive. The logistics support of new manufacturing paradigms such as integrated product-process development (IPPD) for current and future engine technology development necessitates high speed, automated inspection of forged and cast jet engine blades, combined with a capability of retaining and retrieving metrology data for process improvements upstream (designer-level) and downstream (end-user facilities) at commercial and military installations. The paper presents the opportunities emerging from a feasibility study conducted using 3-D holographic laser radar in blade inspection. Requisite developments in computing technologies for systems integration of blade inspection in production are also discussed.

  18. Numerical investigation of flow motion and performance of a horizontal axis tidal turbine subjected to a steady current

    NASA Astrophysics Data System (ADS)

    Li, Lin-juan; Zheng, Jin-hai; Peng, Yu-xuan; Zhang, Ji-sheng; Wu, Xiu-guang

    2015-04-01

    Horizontal axis tidal turbines have attracted more and more attentions nowadays, because of their convenience and low expense in construction and high efficiency in extracting tidal energy. The present study numerically investigates the flow motion and performance of a horizontal axis tidal turbine with a supporting vertical cylinder under steady current. In the numerical model, the continuous equation and incompressible Reynolds-averaged Navier-Stokes equations are solved, and the volume of fluid method is employed to track free surface motion. The RNG k- ɛ model is adopted to calculate turbulence transport while the fractional area/volume obstacle representation method is used to describe turbine characteristics and movement. The effects of installation elevation of tidal turbine and inlet velocity on the water elevation, and current velocity, rotating speed and resultant force on turbine are discussed. Based on the comparison of the numerical results, a better understanding of flow structure around horizontal axis tidal turbine and turbine performance is achieved.

  19. Enzymatic preparation of nanocrystalline and microcrystalline cellulose

    Treesearch

    Sarah R. Anderson; Dominic Esposito; William Gillette; J.Y. Zhu; Ulrich Baxa; Scott E. Mcneil

    2014-01-01

    Traditional cellulose nanocrystal (CNC) production methods use harsh chemicals, are energetically expensive, and result in a hydrophilic sulfate surface chemistry with limited utility. Enzymatic production of CNCs is a less expensive alternative production method that eliminates the need for harsh chemicals and requires much less energy for mechanical fibrillation and...

  20. 26 CFR 1.174-4 - Treatment as deferred expenses.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... period. Application for permission to change to a different method of treating research or experimental... as deferred expenses. (a) In general. (1) If a taxpayer has not adopted the method provided in section 174(a) of treating research or experimental expenditures paid or incurred by him in connection...

  1. 75 FR 13208 - Proposed Collection; Comment Request for Revenue Procedure 2006-42

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-03-18

    ... to the Apportionment of Interest Expense, Research and Experimental Expenditures Under Section 1.861... Certain Elections Relating to the Apportionment of Interest Expense, Research and Experimental... automatic consent to change (a) from the fair market value method or from the alternative tax book method to...

  2. 77 FR 2240 - Allocation and Apportionment of Interest Expense

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-01-17

    ... allocation and apportionment of interest expense using the fair market value asset method. The temporary... law by the legislation commonly referred to as the Education Jobs and Medicaid Assistance Act (EJMAA... using the fair market value method. The text of those regulations also serves as the text of these...

  3. 26 CFR 1.62-2 - Reimbursements and other expense allowance arrangements.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ..., and Taxable Income § 1.62-2 Reimbursements and other expense allowance arrangements. (a) Table of contents. The contents of this section are as follows: (a) Table of contents. (b) Scope. (c) Reimbursement... general. (2) Safe harbors. (i) Fixed date method. (ii) Periodic payment method. (3) Pattern of...

  4. 26 CFR 1.62-2 - Reimbursements and other expense allowance arrangements.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ..., and Taxable Income § 1.62-2 Reimbursements and other expense allowance arrangements. (a) Table of contents. The contents of this section are as follows: (a) Table of contents. (b) Scope. (c) Reimbursement... general. (2) Safe harbors. (i) Fixed date method. (ii) Periodic payment method. (3) Pattern of...

  5. 26 CFR 1.62-2 - Reimbursements and other expense allowance arrangements.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ..., and Taxable Income § 1.62-2 Reimbursements and other expense allowance arrangements. (a) Table of contents. The contents of this section are as follows: (a) Table of contents. (b) Scope. (c) Reimbursement... general. (2) Safe harbors. (i) Fixed date method. (ii) Periodic payment method. (3) Pattern of...

  6. 26 CFR 1.62-2 - Reimbursements and other expense allowance arrangements.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ..., and Taxable Income § 1.62-2 Reimbursements and other expense allowance arrangements. (a) Table of contents. The contents of this section are as follows: (a) Table of contents. (b) Scope. (c) Reimbursement... general. (2) Safe harbors. (i) Fixed date method. (ii) Periodic payment method. (3) Pattern of...

  7. Use of less expensive cigarettes in six cities in China: findings from the International Tobacco Control (ITC) China Survey.

    PubMed

    Li, Qiang; Hyland, Andrew; Fong, Geoffrey T; Jiang, Yuan; Elton-Marshall, Tara

    2010-10-01

    The existence of less expensive cigarettes in China may undermine public health. The aim of the current study is to examine the use of less expensive cigarettes in six cities in China. Data was from the baseline wave of the International Tobacco Control (ITC) China Survey of 4815 adult urban smokers in 6 cities, conducted between April and August 2006. The percentage of smokers who reported buying less expensive cigarettes (the lowest pricing tertile within each city) at last purchase was computed. Complex sample multivariate logistic regression models were used to identify factors associated with use of less expensive cigarettes. The association between the use of less expensive cigarettes and intention to quit smoking was also examined. Smokers who reported buying less expensive cigarettes at last purchase tended to be older, heavier smokers, to have lower education and income, and to think more about the money spent on smoking in the last month. Smokers who bought less expensive cigarettes at the last purchase and who were less knowledgeable about the health harm of smoking were less likely to intend to quit smoking. Measures need to be taken to minimise the price differential among cigarette brands and to increase smokers' health knowledge, which may in turn increase their intentions to quit.

  8. Electromotive force analysis of current transformer during lightning surge inflow using Fourier series expansion

    NASA Astrophysics Data System (ADS)

    Kim, Youngsun

    2017-05-01

    The most common structure used for current transformers (CTs) consists of secondary windings around a ferromagnetic core past the primary current being measured. A CT used as a surge protection device (SPD) may experience large inrushes of current, like surges. However, when a large current flows into the primary winding, measuring the magnitude of the current is difficult because the ferromagnetic core becomes magnetically saturated. Several approaches to reduce the saturation effect are described in the literature. A Rogowski coil is representative of several devices that measure large currents. It is an electrical device that measures alternating current (AC) or high-frequency current. However, such devices are very expensive in application. In addition, the volume of a CT must be increased to measure sufficiently large currents, but for installation spaces that are too small, other methods must be used. To solve this problem, it is necessary to analyze the magnetic field and electromotive force (EMF) characteristics when designing a CT. Thus, we proposed an analysis method for the CT under an inrush current using the time-domain finite element method (TDFEM). The input source current of a surge waveform is expanded by a Fourier series to obtain an instantaneous value. An FEM model of the device is derived in a two-dimensional system and coupled with EMF circuits. The time-derivative term in the differential equation is solved in each time step by the finite difference method. It is concluded that the proposed algorithm is useful for analyzing CT characteristics, including the field distribution. Consequently, the proposed algorithm yields a reference for obtaining the effects of design parameters and magnetic materials for special shapes and sizes before the CT is designed and manufactured.

  9. Effect of seabed roughness on tidal current turbines

    NASA Astrophysics Data System (ADS)

    Gupta, Vikrant; Wan, Minping

    2017-11-01

    Tidal current turbines are shown to have potential to generate clean energy for a negligible environmental impact. These devices, however, operate in high to moderate current regions where the flow is highly turbulent. It has been shown in flume tank experiments at IFREMER in Boulogne-Sur-Mer (France) and NAFL in the University of Minnesota (US) that the level of turbulence and boundary layer profile affect a turbine's power output and wake characteristics. A major factor that determines these marine flow characteristics is the seabed roughness. Experiments, however, cannot simulate the high Reynolds number conditions of real marine flows. For that, we rely on numerical simulations. High accuracy numerical methods, such as DNS, of wall-bounded flows are very expensive, where the number of grid-points needed to resolve the flow varies as (Re) 9 / 4 (where Re is the flow Reynolds number). While numerically affordable RANS methods compromise on accuracy. Wall-modelled LES methods, which provide both accuracy and affordability, have been improved tremendously in the recent years. We discuss the application of such numerical methods for studying the effect of seabed roughness on marine flow features and their impact on turbine power output and wake characteristics. NSFC, Project Number 11672123.

  10. Finite element analysis simulations for ultrasonic array NDE inspections

    NASA Astrophysics Data System (ADS)

    Dobson, Jeff; Tweedie, Andrew; Harvey, Gerald; O'Leary, Richard; Mulholland, Anthony; Tant, Katherine; Gachagan, Anthony

    2016-02-01

    Advances in manufacturing techniques and materials have led to an increase in the demand for reliable and robust inspection techniques to maintain safety critical features. The application of modelling methods to develop and evaluate inspections is becoming an essential tool for the NDE community. Current analytical methods are inadequate for simulation of arbitrary components and heterogeneous materials, such as anisotropic welds or composite structures. Finite element analysis software (FEA), such as PZFlex, can provide the ability to simulate the inspection of these arrangements, providing the ability to economically prototype and evaluate improved NDE methods. FEA is often seen as computationally expensive for ultrasound problems however, advances in computing power have made it a more viable tool. This paper aims to illustrate the capability of appropriate FEA to produce accurate simulations of ultrasonic array inspections - minimizing the requirement for expensive test-piece fabrication. Validation is afforded via corroboration of the FE derived and experimentally generated data sets for a test-block comprising 1D and 2D defects. The modelling approach is extended to consider the more troublesome aspects of heterogeneous materials where defect dimensions can be of the same length scale as the grain structure. The model is used to facilitate the implementation of new ultrasonic array inspection methods for such materials. This is exemplified by considering the simulation of ultrasonic NDE in a weld structure in order to assess new approaches to imaging such structures.

  11. Semi-automatic surface sediment sampling system - A prototype to be implemented in bivalve fishing surveys

    NASA Astrophysics Data System (ADS)

    Rufino, Marta M.; Baptista, Paulo; Pereira, Fábio; Gaspar, Miguel B.

    2018-01-01

    In the current work we propose a new method to sample surface sediment during bivalve fishing surveys. Fishing institutes all around the word carry out regular surveys with the aim of monitoring the stocks of commercial species. These surveys comprise often more than one hundred of sampling stations and cover large geographical areas. Although superficial sediment grain sizes are among the main drivers of benthic communities and provide crucial information for studies on coastal dynamics, overall there is a strong lack of this type of data, possibly, because traditional surface sediment sampling methods use grabs, that require considerable time and effort to be carried out on regular basis or on large areas. In face of these aspects, we developed an easy and un-expensive method to sample superficial sediments, during bivalve fisheries monitoring surveys, without increasing survey time or human resources. The method was successfully evaluated and validated during a typical bivalve survey carried out on the Northwest coast of Portugal, confirming that it had any interference with the survey objectives. Furthermore, the method was validated by collecting samples using a traditional Van Veen grabs (traditional method), which showed a similar grain size composition to the ones collected by the new method, on the same localities. We recommend that the procedure is implemented on regular bivalve fishing surveys, together with an image analysis system to analyse the collected samples. The new method will provide substantial quantity of data on surface sediment in coastal areas, using a non-expensive and efficient manner, with a high potential application in different fields of research.

  12. Backscatter analysis of dihedral corner reflectors using physical optics and the physical theory of diffraction

    NASA Technical Reports Server (NTRS)

    Griesser, Timothy; Balanis, Constantine A.

    1987-01-01

    The backscatter cross-sections of dihedral corner reflectors in the azimuthal plane are presently determined by both physical optics (PO) and the physical theory of diffraction (PTD), yielding results for the vertical and horizontal polarizations. In the first analysis method used, geometrical optics is used in place of PO at initial reflections in order to maintain the planar character of the reflected wave and reduce the complexity of the analysis. In the second method, PO is used at almost every reflection in order to maximize the accuracy of the PTD solution at the expense of a rapid increase in complexity. Induced surface current densities and resulting cross section patterns are illustrated for the two methods.

  13. Secondary School Chemistry Teacher's Current Use of Laboratory Activities and the Impact of Expense on Their Laboratory Choices

    ERIC Educational Resources Information Center

    Boesdorfer, Sarah B.; Livermore, Robin A.

    2018-01-01

    In the United States with the Next Generation Science Standards (NGSS)'s emphasis on learning science while doing science, laboratory activities in the secondary school chemistry continues to be an important component of a strong curriculum. Laboratory equipment and consumable materials create a unique expense which chemistry teachers and schools…

  14. The impact of environmental pollution on public health expenditure: dynamic panel analysis based on Chinese provincial data.

    PubMed

    Hao, Yu; Liu, Shuang; Lu, Zhi-Nan; Huang, Junbing; Zhao, Mingyuan

    2018-05-01

    In recent years, along with rapid economic growth, China's environmental problems have become increasingly prominent. At the same time, the level of China's pollution has been growing rapidly, which has caused huge damages to the residents' health. In this regard, the public health expenditure ballooned as the environmental quality deteriorated in China. In this study, the effect of environmental pollution on residents' health expenditure is empirically investigated by employing the first-order difference generalized method of moments (GMM) method to control for potential endogeneity. Using a panel data of Chinese provinces for the period of 1998-2015, this study found that the environmental pollution (represented by SO 2 and soot emissions) would indeed lead to the increase in the medical expenses of Chinese residents. At the current stage of economic development, an increase in SO 2 and soot emissions per capita would push up the public health expenditure per capita significantly. The estimation results are quite robust for different types of regression specifications and different combinations of control variables. Some social and economic variables such as public services and education may also have remarkable influences on residential medical expenses through different channels.

  15. Software compensation of eddy current fields in multislice high order dynamic shimming.

    PubMed

    Sengupta, Saikat; Avison, Malcolm J; Gore, John C; Brian Welch, E

    2011-06-01

    Dynamic B(0) shimming (DS) can produce better field homogeneity than static global shimming by dynamically updating slicewise shim values in a multislice acquisition. The performance of DS however is limited by eddy current fields produced by the switching of 2nd and 3rd order unshielded shims. In this work, we present a novel method of eddy field compensation (EFC) applied to higher order shim induced eddy current fields in multislice DS. This method does not require shim shielding, extra hardware for eddy current compensation or subject specific prescanning. The interactions between shim harmonics are modeled assuming steady state of the medium and long time constant, cross and self term eddy fields in a DS experiment and 'correction factors' characterizing the entire set of shim interactions are derived. The correction factors for a given time between shim switches are shown to be invariable with object scanned, shim switching pattern and actual shim values, allowing for their generalized prospective use. Phantom and human head, 2nd and 3rd order DS experiments performed without any hardware eddy current compensation using the technique show large reductions in field gradients and offsets leading to significant improvements in image quality. This method holds promise as an alternative to expensive hardware based eddy current compensation required in 2nd and 3rd order DS. Copyright © 2011 Elsevier Inc. All rights reserved.

  16. Distributive, Non-destructive Real-time System and Method for Snowpack Monitoring

    NASA Technical Reports Server (NTRS)

    Frolik, Jeff (Inventor); Skalka, Christian (Inventor)

    2013-01-01

    A ground-based system that provides quasi real-time measurement and collection of snow-water equivalent (SWE) data in remote settings is provided. The disclosed invention is significantly less expensive and easier to deploy than current methods and less susceptible to terrain and snow bridging effects. Embodiments of the invention include remote data recovery solutions. Compared to current infrastructure using existing SWE technology, the disclosed invention allows more SWE sites to be installed for similar cost and effort, in a greater variety of terrain; thus, enabling data collection at improved spatial resolutions. The invention integrates a novel computational architecture with new sensor technologies. The invention's computational architecture is based on wireless sensor networks, comprised of programmable, low-cost, low-powered nodes capable of sophisticated sensor control and remote data communication. The invention also includes measuring attenuation of electromagnetic radiation, an approach that is immune to snow bridging and significantly reduces sensor footprints.

  17. Improving the Accuracy of Predicting Maximal Oxygen Consumption (VO2pk)

    NASA Technical Reports Server (NTRS)

    Downs, Meghan E.; Lee, Stuart M. C.; Ploutz-Snyder, Lori; Feiveson, Alan

    2016-01-01

    Maximal oxygen (VO2pk) is the maximum amount of oxygen that the body can use during intense exercise and is used for benchmarking endurance exercise capacity. The most accurate method to determineVO2pk requires continuous measurements of ventilation and gas exchange during an exercise test to maximal effort, which necessitates expensive equipment, a trained staff, and time to set-up the equipment. For astronauts, accurate VO2pk measures are important to assess mission critical task performance capabilities and to prescribe exercise intensities to optimize performance. Currently, astronauts perform submaximal exercise tests during flight to predict VO2pk; however, while submaximal VO2pk prediction equations provide reliable estimates of mean VO2pk for populations, they can be unacceptably inaccurate for a given individual. The error in current predictions and logistical limitations of measuring VO2pk, particularly during spaceflight, highlights the need for improved estimation methods.

  18. 41 CFR 302-7.201 - Is temporary storage in excess of authorized limits and excess valuation of goods and services...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... excess of authorized limits and excess valuation of goods and services payable at Government expense? 302... Government expense? No, charges for excess weight, valuation above the minimum amount, and services obtained... HOUSEHOLD GOODS AND PROFESSIONAL BOOKS, PAPERS, AND EQUIPMENT (PBP&E) Actual Expense Method § 302-7.201 Is...

  19. 41 CFR 302-7.201 - Is temporary storage in excess of authorized limits and excess valuation of goods and services...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... excess of authorized limits and excess valuation of goods and services payable at Government expense? 302... Government expense? No, charges for excess weight, valuation above the minimum amount, and services obtained... HOUSEHOLD GOODS AND PROFESSIONAL BOOKS, PAPERS, AND EQUIPMENT (PBP&E) Actual Expense Method § 302-7.201 Is...

  20. [Cost accounting for gastrectomy under critical path--the usefulness of direct accounting of personnel expenses and a guide to shortening hospital stay].

    PubMed

    Nozue, M; Maruyama, T; Imamura, F; Fukue, M

    2000-08-01

    In this study, cost accounting was made for a surgical case of gastrectomy according to critical path (path) and the economic contribution of the path was determined. In addition, changes in the cost percentage with changes in number of hospital days were simulated. Basically, cost accounting was done by means of cost accounting by departments, which meets the concept of direct cost accounting of administered accounts. Personnel expenses were calculated by means of both direct and indirect calculations. In the direct method, the total hours personnel participated were recorded for calculation. In the indirect method, personnel expenses were calculated from the ratio of the income of the surgical department to that of other departments. Purchase prices for all materials and drugs used were recorded to check buying costs. According to the direct calculating method, the personnel expenses came to approximately 300,000 yen, total cost was approximately 700,000 yen, and the cost percentage was 59%. According to the indirect method, the personnel expenses were approximately 540,000 yen and the total cost was approximately 940,000 yen, the cost percentage being 80%. A simulation study of changes in the cost with changes in hospital days revealed that the cost percentages were assessed to be approximately 53% in 19 hospital days and approximately 45% in 12 hospital days.

  1. Did You Hear the One About the Doctor? An Examination of Doctor Jokes Posted on Facebook

    PubMed Central

    Haney, Carol Sue; Weeks, William B; Sirovich, Brenda E; Anthony, Denise L

    2014-01-01

    Background Social networking sites such as Facebook have become immensely popular in recent years and present a unique opportunity for researchers to eavesdrop on the collective conversation of current societal issues. Objective We sought to explore doctor-related humor by examining doctor jokes posted on Facebook. Methods We performed a cross-sectional study of 33,326 monitored Facebook users, 263 (0.79%) of whom posted a joke that referenced doctors on their Facebook wall during a 6-month observation period (December 15, 2010 to June 16, 2011). We compared characteristics of so-called jokers to nonjokers and identified the characteristics of jokes that predicted joke success measured by having elicited at least one electronic laugh (eg, an LOL or “laughing out loud”) as well as the total number of Facebook “likes” the joke received. Results Jokers told 156 unique doctor jokes and were the same age as nonjokers but had larger social networks (median Facebook friends 227 vs 132, P<.001) and were more likely to be divorced, separated, or widowed (P<.01). In 39.7% (62/156) of unique jokes, the joke was at the expense of doctors. Jokes at the expense of doctors compared to jokes not at the expense of doctors tended to be more successful in eliciting an electronic laugh (46.5% vs 37.3%), although the association was statistically insignificant. In our adjusted models, jokes that were based on current events received considerably more Facebook likes (rate ratio [RR] 2.36, 95% CI 0.97-5.74). Conclusions This study provides insight into the use of social networking sites for research pertaining to health and medicine, including the world of doctor-related humor. PMID:24550095

  2. The behavior of nanosatellite body materials during electromagnetic launch

    NASA Astrophysics Data System (ADS)

    Gerasimov, Yu V.; Konstantinova, I. A.; Konstantinova, L. A.; Rakhimov, R. G.; Selivanov, A. B.

    2017-11-01

    Current development of aerospace technology and demands for the economic feasibility have led to a reduction in weight and size characteristics of the on-board electronics and other on-board equipment. There is a tendency to use small-scale spacecraft: midi-satellites, mini-satellites, nanosatellites etc. Reducing the weight and size characteristics of the satellites makes electromagnetic launching techniques more promising compared to traditional methods of sending payload into orbit. Electromagnetic launch does not require expensive space centers - it is cost-efficient, environmentally friendly and enables frequent low-cost launches.

  3. The impact of population aging on medical expenses: A big data study based on the life table.

    PubMed

    Wang, Changying; Li, Fen; Wang, Linan; Zhou, Wentao; Zhu, Bifan; Zhang, Xiaoxi; Ding, Lingling; He, Zhimin; Song, Peipei; Jin, Chunlin

    2018-01-09

    This study shed light on the amount and structure of utilization and medical expenses on Shanghai permanent residents based on big data, simulated lifetime medical expenses through combining of expenses data and life table model, and explored the dynamic pattern of aging on medical expenditures. 5 years were taken as the class interval, the study collected and did the descriptive analysis on the medical services utilization and medical expenses information for all ages of Shanghai permanent residents in 2015, simulated lifetime medical expenses by using current life table and cross-section expenditure data. The results showed that in 2015, outpatient and emergency visits per capita in the elderly group (aged 60 and over) was 4.1 and 4.5 times higher than the childhood group (aged 1-14), and the youth and adult group (aged 15-59); hospitalization per capita in the elderly group was 3.0 and 3.5 times higher than the childhood group, and the youth and adult group. People survived in the 60-64 years group, their expected whole medical expenses (105,447 purchasing power parity Dollar) in the rest of their lives accounted for 75.6% of their lifetime. A similar study in Michigan, US showed that the expenses of the population aged 65 and over accounted for 1/2 of lifetime medical expenses, which is much lower than Shanghai. The medical expenses of the advanced elderly group (aged 80 and over) accounted for 38.8% of their lifetime expenses, including 38.2% in outpatient and emergency, and 39.5% in hospitalization, which was slightly higher than outpatient and emergency. There is room to economize in medical expenditures of the elderly people in Shanghai, especially controlling hospitalization expenses is the key to saving medical expenses of elderly people aged over 80 and over.

  4. 27 CFR 53.92 - Exclusions from sale price.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... expense incurred after shipment to a customer begins, in response to the customer's order, pursuant to a... satisfaction of the appropriate TTB officer that another method reasonably apportions such freight expense...

  5. Commercial Motion Sensor Based Low-Cost and Convenient Interactive Treadmill.

    PubMed

    Kim, Jonghyun; Gravunder, Andrew; Park, Hyung-Soon

    2015-09-17

    Interactive treadmills were developed to improve the simulation of overground walking when compared to conventional treadmills. However, currently available interactive treadmills are expensive and inconvenient, which limits their use. We propose a low-cost and convenient version of the interactive treadmill that does not require expensive equipment and a complicated setup. As a substitute for high-cost sensors, such as motion capture systems, a low-cost motion sensor was used to recognize the subject's intention for speed changing. Moreover, the sensor enables the subject to make a convenient and safe stop using gesture recognition. For further cost reduction, the novel interactive treadmill was based on an inexpensive treadmill platform and a novel high-level speed control scheme was applied to maximize performance for simulating overground walking. Pilot tests with ten healthy subjects were conducted and results demonstrated that the proposed treadmill achieves similar performance to a typical, costly, interactive treadmill that contains a motion capture system and an instrumented treadmill, while providing a convenient and safe method for stopping.

  6. Production and Application of a Soluble Hydrogenase from Pyrococcus furiosus

    DOE PAGES

    Wu, Chang-Hao; McTernan, Patrick M.; Walter, Mary E.; ...

    2015-01-01

    Hydrogen gas is a potential renewable alternative energy carrier that could be used in the future to help supplement humanity’s growing energy needs. Unfortunately, current industrial methods for hydrogen production are expensive or environmentally unfriendly. In recent years research has focused on biological mechanisms for hydrogen production and specifically on hydrogenases, the enzyme responsible for catalyzing the reduction of protons to generate hydrogen. In particular, a better understanding of this enzyme might allow us to generate hydrogen that does not use expensive metals, such as platinum, as catalysts. The soluble hydrogenase I (SHI) from the hyperthermophile Pyrococcus furiosus , amore » member of the euryarchaeota, has been studied extensively and used in various biotechnological applications. This review summarizes the strategies used in engineering and characterizing three different forms of SHI and the properties of the recombinant enzymes. SHI has also been used in in vitro systems for hydrogen production and NADPH generation and these systems are also discussed.« less

  7. Production and Application of a Soluble Hydrogenase from Pyrococcus furiosus

    PubMed Central

    Wu, Chang-Hao; McTernan, Patrick M.; Walter, Mary E.; Adams, Michael W. W.

    2015-01-01

    Hydrogen gas is a potential renewable alternative energy carrier that could be used in the future to help supplement humanity's growing energy needs. Unfortunately, current industrial methods for hydrogen production are expensive or environmentally unfriendly. In recent years research has focused on biological mechanisms for hydrogen production and specifically on hydrogenases, the enzyme responsible for catalyzing the reduction of protons to generate hydrogen. In particular, a better understanding of this enzyme might allow us to generate hydrogen that does not use expensive metals, such as platinum, as catalysts. The soluble hydrogenase I (SHI) from the hyperthermophile Pyrococcus furiosus, a member of the euryarchaeota, has been studied extensively and used in various biotechnological applications. This review summarizes the strategies used in engineering and characterizing three different forms of SHI and the properties of the recombinant enzymes. SHI has also been used in in vitro systems for hydrogen production and NADPH generation and these systems are also discussed. PMID:26543406

  8. 7 CFR 1484.53 - What are the requirements for documenting and reporting contributions?

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... contribution must be documented by the Cooperator, showing the method of computing non-cash contributions, salaries, and travel expenses. (b) Each Cooperator must keep records of the methods used to compute the value of non-cash contributions, and (1) Copies of invoices or receipts for expenses paid by the U.S...

  9. Simpler less expensive method for analysis of inorganic as (iAs) in rice

    USDA-ARS?s Scientific Manuscript database

    New limits on iAs in rice products require that samples be analyzed for iAs to assure compliance. Initially reported methods used measurement of all species of As present in rice and other foods, which requires very expensive staff and equipment, and a high cost per sample for rice iAs analysis. In...

  10. Role of In Vitro Release Methods in Liposomal Formulation Development: Challenges and Regulatory Perspective.

    PubMed

    Solomon, Deepak; Gupta, Nilesh; Mulla, Nihal S; Shukla, Snehal; Guerrero, Yadir A; Gupta, Vivek

    2017-11-01

    In the past few years, measurement of drug release from pharmaceutical dosage forms has been a focus of extensive research because the release profile obtained in vitro can give an indication of the drug's performance in vivo. Currently, there are no compendial in vitro release methods designed for liposomes owing to a range of experimental challenges, which has created a major hurdle for both development and regulatory acceptance of liposome-based drug products. In this paper, we review the current techniques that are most often used to assess in vitro drug release from liposomal products; these include the membrane diffusion techniques (dialysis, reverse dialysis, fractional dialysis, and microdialysis), the sample-and-separate approach, the in situ method, the continuous flow, and the modified United States Pharmacopeia methods (USP I and USP IV). We discuss the principles behind each of the methods and the criteria that assist in choosing the most appropriate method for studying drug release from a liposomal formulation. Also, we have included information concerning the current regulatory requirements for liposomal drug products in the United States and in Europe. In light of increasing costs of preclinical and clinical trials, applying a reliable in vitro release method could serve as a proxy to expensive in vivo bioavailability studies. Graphical Abstract Appropriate in-vitro drug release test from liposomal products is important to predict the in-vivo performance.

  11. 20 CFR 10.508 - May relocation expenses be paid for an employee who would need to move to accept an offer of...

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... Return to Work-Employer's Responsibilities § 10.508 May relocation expenses be paid for an employee who would need to move to accept an offer of reemployment? If possible, the employer should offer suitable reemployment in the location where the employee currently resides. If this is not practical, the employer may...

  12. Microplasma fabrication: from semiconductor technology for 2D-chips and microfluidic channels to rapid prototyping and 3D-printing of microplasma devices

    NASA Astrophysics Data System (ADS)

    Shatford, R.; Karanassios, Vassili

    2014-05-01

    Microplasmas are receiving attention in recent conferences and current scientific literature. In our laboratory, microplasmas-on-chips proved to be particularly attractive. The 2D- and 3D-chips we developed became hybrid because they were fitted with a quartz plate (quartz was used due to its transparency to UV). Fabrication of 2D- and 3D-chips for microplasma research is described. The fabrication methods described ranged from semiconductor fabrication technology, to Computer Numerical Control (CNC) machining, to 3D-printing. These methods may prove to be useful for those contemplating in entering microplasma research but have no access to expensive semiconductor fabrication equipment.

  13. Demonstration Of Ultra HI-FI (UHF) Methods

    NASA Technical Reports Server (NTRS)

    Dyson, Rodger W.

    2004-01-01

    Computational aero-acoustics (CAA) requires efficient, high-resolution simulation tools. Most current techniques utilize finite-difference approaches because high order accuracy is considered too difficult or expensive to achieve with finite volume or finite element methods. However, a novel finite volume approach (Ultra HI-FI or UHF) which utilizes Hermite fluxes is presented which can achieve both arbitrary accuracy and fidelity in space and time. The technique can be applied to unstructured grids with some loss of fidelity or with multi-block structured grids for maximum efficiency and resolution. In either paradigm, it is possible to resolve ultra-short waves (less than 2 PPW). This is demonstrated here by solving the 4th CAA workshop Category 1 Problem 1.

  14. Etching-free patterning method for electrical characterization of atomically thin MoSe2 films grown by chemical vapor deposition.

    PubMed

    Utama, M Iqbal Bakti; Lu, Xin; Zhan, Da; Ha, Son Tung; Yuan, Yanwen; Shen, Zexiang; Xiong, Qihua

    2014-11-07

    Patterning two-dimensional materials into specific spatial arrangements and geometries is essential for both fundamental studies of materials and practical applications in electronics. However, the currently available patterning methods generally require etching steps that rely on complicated and expensive procedures. We report here a facile patterning method for atomically thin MoSe2 films using stripping with an SU-8 negative resist layer exposed to electron beam lithography. Additional steps of chemical and physical etching were not necessary in this SU-8 patterning method. The SU-8 patterning was used to define a ribbon channel from a field effect transistor of MoSe2 film, which was grown by chemical vapor deposition. The narrowing of the conduction channel area with SU-8 patterning was crucial in suppressing the leakage current within the device, thereby allowing a more accurate interpretation of the electrical characterization results from the sample. An electrical transport study, enabled by the SU-8 patterning, showed a variable range hopping behavior at high temperatures.

  15. Read count-based method for high-throughput allelic genotyping of transposable elements and structural variants.

    PubMed

    Kuhn, Alexandre; Ong, Yao Min; Quake, Stephen R; Burkholder, William F

    2015-07-08

    Like other structural variants, transposable element insertions can be highly polymorphic across individuals. Their functional impact, however, remains poorly understood. Current genome-wide approaches for genotyping insertion-site polymorphisms based on targeted or whole-genome sequencing remain very expensive and can lack accuracy, hence new large-scale genotyping methods are needed. We describe a high-throughput method for genotyping transposable element insertions and other types of structural variants that can be assayed by breakpoint PCR. The method relies on next-generation sequencing of multiplex, site-specific PCR amplification products and read count-based genotype calls. We show that this method is flexible, efficient (it does not require rounds of optimization), cost-effective and highly accurate. This method can benefit a wide range of applications from the routine genotyping of animal and plant populations to the functional study of structural variants in humans.

  16. 5 CFR 845.304 - Financial hardship.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... situations when the annuitant from whom collection is sought needs substantially all of his or her current income and liquid assets to meet current ordinary and necessary living expenses and liabilities. (a... primary emphasis will be placed upon the annuitant's liquid assets and current income in making such...

  17. Current practice and usual care of major cervical disorders in Korea

    PubMed Central

    Choi, A Ryeon; Shin, Joon-Shik; Lee, Jinho; Lee, Yoon Jae; Kim, Me-riong; Oh, Min-seok; Lee, Eun-Jung; Kim, Sungchul; Kim, Mia; Ha, In-Hyuk

    2017-01-01

    Abstract Neck pain is a highly common condition and is the 4th major cause of years lived with disability. Previous literature has focused on the effect of specific treatments, and observations of actual practice are lacking to date. This study examined Korean health insurance review and assessment service (HIRA) claims data to the aim of assessing prevalence and comparing current medical practice and costs of cervical disorders in Korea. Current practice trends were determined through assessment of prevalence, total expenses, per-patient expense, average days in care, average days of visits, sociodemographic characteristics, distribution of medical costs, and frequency of treatment types of high frequency cervical disorders (cervical sprain/strain, cervical intervertebral disc displacement [IDD], and cervicalgia). Although the number of cervical IDD patients was few, total expenses, per-patient expense, average days in care, and average days of visits were highest. The proportion of women was higher than men in all 3 groups with highest prevalence in the ≥50s middle-aged population for IDD compared to sprain/strain. Primary care settings were commonly used for ambulatory care, of which approximately 70% chose orthopedic specialist treatment. In analysis of medical expenditure distribution, costs of visit (consultation) (22%–34%) and physical therapy (14%–16%) were in the top 3 for all 3 disorders. Although heat and electrical therapies were the most frequently used physical therapies, traction use was high in the cervical IDD group. In nonnarcotics, aceclofenac and diclofenac were the most commonly used NSAIDs, and pethidine was their counterpart in narcotics. This study investigated practice trends and cost distribution of treatment regimens for major cervical disorders, providing current usage patterns to healthcare policy decision makers, and the detailed treatment reports are expected to be of use to clinicians and researchers in understanding current usual care. PMID:29145327

  18. Current practice and usual care of major cervical disorders in Korea: A cross-sectional study of Korean health insurance review and assessment service national patient sample data.

    PubMed

    Choi, A Ryeon; Shin, Joon-Shik; Lee, Jinho; Lee, Yoon Jae; Kim, Me-Riong; Oh, Min-Seok; Lee, Eun-Jung; Kim, Sungchul; Kim, Mia; Ha, In-Hyuk

    2017-11-01

    Neck pain is a highly common condition and is the 4th major cause of years lived with disability. Previous literature has focused on the effect of specific treatments, and observations of actual practice are lacking to date. This study examined Korean health insurance review and assessment service (HIRA) claims data to the aim of assessing prevalence and comparing current medical practice and costs of cervical disorders in Korea.Current practice trends were determined through assessment of prevalence, total expenses, per-patient expense, average days in care, average days of visits, sociodemographic characteristics, distribution of medical costs, and frequency of treatment types of high frequency cervical disorders (cervical sprain/strain, cervical intervertebral disc displacement [IDD], and cervicalgia).Although the number of cervical IDD patients was few, total expenses, per-patient expense, average days in care, and average days of visits were highest. The proportion of women was higher than men in all 3 groups with highest prevalence in the ≥50s middle-aged population for IDD compared to sprain/strain. Primary care settings were commonly used for ambulatory care, of which approximately 70% chose orthopedic specialist treatment. In analysis of medical expenditure distribution, costs of visit (consultation) (22%-34%) and physical therapy (14%-16%) were in the top 3 for all 3 disorders. Although heat and electrical therapies were the most frequently used physical therapies, traction use was high in the cervical IDD group. In nonnarcotics, aceclofenac and diclofenac were the most commonly used NSAIDs, and pethidine was their counterpart in narcotics.This study investigated practice trends and cost distribution of treatment regimens for major cervical disorders, providing current usage patterns to healthcare policy decision makers, and the detailed treatment reports are expected to be of use to clinicians and researchers in understanding current usual care.

  19. [Morbidity profile and hospital expenses with elderly patients in Paraná State, Brazil, 2008-2012].

    PubMed

    Kernkamp, Clarice da Luz; Costa, Cassia Kely Favoretto; Massuda, Ely Mitie; Silva, Eraldo Schunk; Yamaguchi, Mirian Ueda; Bernuci, Marcelo Picinin

    2016-07-21

    Growth in the elderly population has increased both the demand for health services and healthcare expenses, with relevant consequences for economic stability. The current study aimed to analyze the morbidity profile and hospital expenses with elderly patients in relation to socioeconomic and demographic conditions in Paraná State, Brazil, from 2008 to 2012, applying principal components analysis and groupings. Regions with higher and lower economic and human development showed high prevalence of hospitalizations and costs pertaining to the circulatory and respiratory systems and cardiac diseases for males and females. In regions with intermediary development, diseases of the nervous system in men and of the circulatory system in women had the highest morbidity and hospital expenses. Thus, measures for prevention and health promotion in this elderly population should be targeted to regional investigations.

  20. Student Expenses in Residency Interviewing

    PubMed Central

    Walling, Anne; Nilsen, Kari; Callaway, Paul; Grothusen, Jill; Gillenwater, Cole; King, Samantha; Unruh, Gregory

    2017-01-01

    Background The student costs of residency interviewing are of increasing concern but limited current information is available. Updated, more detailed information would assist students and residency programs in decisions about residency selection. The study objective was to measure the expenses and time spent in residency interviewing by the 2016 graduating class of the University of Kansas School of Medicine and assess the impact of gender, regional campus location, and primary care application. Methods All 195 students who participated in the 2016 National Residency Matching Program (NRMP) received a 33 item questionnaire addressing interviewing activity, expenses incurred, time invested and related factors. Main measures were self-reported estimates of expenses and time spent interviewing. Descriptive analyses were applied to participant characteristics and responses. Multivariate analysis of variance (MANOVA) and chi-square tests compared students by gender, campus (main/regional), and primary care/other specialties. Analyses of variance (ANOVA) on the dependent variables provided follow-up tests on significant MANOVA results. Results A total of 163 students (84%) completed the survey. The average student reported 38 (1–124) applications, 16 (1–54) invitations, 11 (1–28) completed interviews, and spent $3,500 ($20–$12,000) and 26 (1–90) days interviewing. No significant differences were found by gender. After MANOVA and ANOVA analyses, non-primary care applicants reported significantly more applications, interviews, and expenditures, but less program financial support. Regional campus students reported significantly fewer invitations, interviews, and days interviewing, but equivalent costs when controlled for primary care application. Cost was a limiting factor in accepting interviews for 63% and time for 53% of study respondents. Conclusions Students reported investing significant time and money in interviewing. After controlling for other variables, primary care was associated with significantly lowered expenses. Regional campus location was associated with fewer interviews and less time interviewing. Gender had no significant impact on any aspect studied. PMID:29472969

  1. 20 CFR 404.508 - Defeat the purpose of Title II.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ...) situations where the person from whom recovery is sought needs substantially all of his current income (including social security monthly benefits) to meet current ordinary and necessary living expenses. [32 FR... necessary needs, or is dependent upon all of his current benefits for such needs. An individual's ordinary...

  2. Reducing the Variations in Per Pupil Operating Expense Among New York State School Districts by Enlarging the Tax Base: A Regional Tax Base Model.

    ERIC Educational Resources Information Center

    New York State Div. of the Budget, Albany.

    Uneven access to taxable real property wealth currently produces wide disparities in per pupil expenditures among New York state school districts. The state's operating aid formula does not compensate for the inequities in low wealth districts having an operating expense level of more than $1,500 per pupil. In the last decade several proposals…

  3. A simple method to predict body temperature of small reptiles from environmental temperature.

    PubMed

    Vickers, Mathew; Schwarzkopf, Lin

    2016-05-01

    To study behavioral thermoregulation, it is useful to use thermal sensors and physical models to collect environmental temperatures that are used to predict organism body temperature. Many techniques involve expensive or numerous types of sensors (cast copper models, or temperature, humidity, radiation, and wind speed sensors) to collect the microhabitat data necessary to predict body temperatures. Expense and diversity of requisite sensors can limit sampling resolution and accessibility of these methods. We compare body temperature predictions of small lizards from iButtons, DS18B20 sensors, and simple copper models, in both laboratory and natural conditions. Our aim was to develop an inexpensive yet accurate method for body temperature prediction. Either method was applicable given appropriate parameterization of the heat transfer equation used. The simplest and cheapest method was DS18B20 sensors attached to a small recording computer. There was little if any deficit in precision or accuracy compared to other published methods. We show how the heat transfer equation can be parameterized, and it can also be used to predict body temperature from historically collected data, allowing strong comparisons between current and previous environmental temperatures using the most modern techniques. Our simple method uses very cheap sensors and loggers to extensively sample habitat temperature, improving our understanding of microhabitat structure and thermal variability with respect to small ectotherms. While our method was quite precise, we feel any potential loss in accuracy is offset by the increase in sample resolution, important as it is increasingly apparent that, particularly for small ectotherms, habitat thermal heterogeneity is the strongest influence on transient body temperature.

  4. Ground-based thermal imaging of stream surface temperatures: Technique and evaluation

    USGS Publications Warehouse

    Bonar, Scott A.; Petre, Sally J.

    2015-01-01

    We evaluated a ground-based handheld thermal imaging system for measuring water temperatures using data from eight southwestern USA streams and rivers. We found handheld thermal imagers could provide considerably more spatial information on water temperature (for our unit one image = 19,600 individual temperature measurements) than traditional methods could supply without a prohibitive amount of effort. Furthermore, they could provide measurements of stream surface temperature almost instantaneously compared with most traditional handheld thermometers (e.g., >20 s/reading). Spatial temperature analysis is important for measurement of subtle temperature differences across waterways, and identification of warm and cold groundwater inputs. Handheld thermal imaging is less expensive and equipment intensive than airborne thermal imaging methods and is useful under riparian canopies. Disadvantages of handheld thermal imagers include their current higher expense than thermometers, their susceptibility to interference when used incorrectly, and their slightly lower accuracy than traditional temperature measurement methods. Thermal imagers can only measure surface temperature, but this usually corresponds to subsurface temperatures in well-mixed streams and rivers. Using thermal imaging in select applications, such as where spatial investigations of water temperature are needed, or in conjunction with stationary temperature data loggers or handheld electronic or liquid-in-glass thermometers to characterize stream temperatures by both time and space, could provide valuable information on stream temperature dynamics. These tools will become increasingly important to fisheries biologists as costs continue to decline.

  5. Medicaid program; deduction of incurred medical expenses (spenddown)--HCFA. Final rule with comment period.

    PubMed

    1994-01-12

    This final rule with comment period permits States flexibility to revise the process by which incurred medical expenses are considered to reduce an individual's or family's income to become Medicaid eligible. This process is commonly referred to as "spenddown." Only States which cover the medically needy, and States which use more restrictive criteria to determine eligibility of the aged, blind, and disabled, than the criteria used to determine eligibility for Supplemental Security Income (SSI) benefits (section 1902(f) States) have a spenddown. These revisions permit States to: Consider as incurred medical expenses projected institutional expenses at the Medicaid reimbursement rate, and deduct those projected expenses from income in determining eligibility; combine the retroactive and prospective medically needy budget periods; either include or exclude medical expenses incurred earlier than the third month before the month of application (States must, however, deduct current payments on old bills not previously deducted in any budget period); and deduct incurred medical expenses from income in the order in which the services were provided, in the order each bill is submitted to the agency, by type of service. All States with medically needy programs using the criteria of the SS program may implement any of the provisions. States using more restrict criteria than the SSI program under section 1902(f) of the Social Security Act may implement all of these provisions except for the option to exclude medical expenses incurred earlier than the third month before the month of application.

  6. Health savings accounts--a revolutionary method of funding medical care expenses.

    PubMed

    Knox, George Con

    2004-10-01

    Health Savings Accounts coupled with a High-Deductible Health Care plan offer many eligible individuals the opportunity to reduce their insurance premiums and create a tax-deductible account to pay medical, dental, and vision care expenses.

  7. F-16 Instructional Sequencing Plan Report.

    DTIC Science & Technology

    1981-03-01

    information). 2. Interference (learning of some tasks interferes with the learning of other tasks when they possess similar but confusing differences ...profound effect on the total training expense. This increases the desirability of systematic, precise methods of syllabus generation. Inherent in a given...the expensive to acquire. resource. Least cost The syllabus must Select sequences which provide a least total make maximum use of cost method of

  8. A question of balance: nutrition, health and gastronomy.

    PubMed

    Coveney, J; Santich, B

    1997-06-01

    Given the higher proportion of manufactured foods now available which meet current dietary recommendations, the food supply in developed countries like Australia could be said to be "healthier". Yet the "health" of the diet is often achieved at the expense of the "health" of the environment since ecological problems created a current food production and distribution methods remain unaddressed. Further, nutritional modifications which produce foods that are low in fat, sugar, salt and high in fibre do not necessarily address the concerns consumers have about the food supply. An emphasis solely on the physical health of populations, through improved diet, is out of keeping with current views on health which recognise the importance of overall well-being. Through the development of the concept of "sustaining gastronomy", consumers, food manufacturers and producers, and food regulators can better address the problems inherent in the food system, including those of an environmental nature.

  9. Hospital economics of primary total knee arthroplasty at a teaching hospital.

    PubMed

    Healy, William L; Rana, Adam J; Iorio, Richard

    2011-01-01

    The hospital cost of total knee arthroplasty (TKA) in the United States is a major growing expense for the Centers for Medicare & Medicaid Services (CMS). Many hospitals are unable to deliver TKA with profitable or breakeven economics under the current Diagnosis-Related Group (DRG) hospital reimbursement system. The purposes of the current study were to (1) determine revenue, expenses, and profitability (loss) for TKA for all patients and for different payors; (2) define changes in utilization and unit costs associated with this operation; and (3) describe TKA cost control strategies to provide insight for hospitals to improve their economic results for TKA. From 1991 to 2009, Lahey Clinic converted a $2172 loss per case on primary TKA in 1991 to a $2986 profit per case in 2008. The improved economics was associated with decreasing revenue in inflation-adjusted dollars and implementation of hospital cost control programs that reduced hospital expenses for TKA. Reduction of hospital length of stay and reduction of knee implant costs were the major drivers of hospital expense reduction. During the last 25 years, our economic experience with TKA is concerning. Hospital revenues have lagged behind inflation, hospital expenses have been reduced, and our institution is earning a profit. However, the margin for TKA is decreasing and Managed Medicare patients do not generate a profit. The erosion of hospital revenue for TKA will become a critical issue if it leads to economic losses for hospitals or reduced access to TKA. Level III, Economic and Decision Analyses. See Guidelines for Authors for a complete description of levels of evidence.

  10. Chemiluminescence of creatinine/H2O2/Co(2+) and its application for selective creatinine detection.

    PubMed

    Hanif, Saima; John, Peter; Gao, Wenyue; Saqib, Muhammad; Qi, Liming; Xu, Guobao

    2016-01-15

    Creatinine is an important biomarker in clinical diagnosis and biomonitoring programs as well as urinary metabolomic/metabonomics research. Current methods are either nonselective, time consuming or require heavy and expensive instruments. In this study, chemiluminescence of creatinine with hydrogen peroxide has been reported for the first time, and its chemiluminescence is remarkably enhanced in the presence of cobalt ions. By utilizing these phenomena, we have developed a sensitive and selective chemiluminescence method for creatinine determination by coupling with flow injection analysis. The calibration curve is linear in the range of 1×10(-7)-3×10(-5)mol/L with a limit of detection (S/N=3) of 7.2×10(-8)mol/L, which is adequate for detecting creatinine in the clinically accepted range. The relative standard deviation for seven measurements of 3×10(-5)mol/L creatinine is 1.2%. The chemiluminescence method was then utilized to detect creatinine in human urine samples after simple dilution with water. It takes less than 1min each measurement and the recoveries for spiked urine samples were 100-103%. The interference study demonstrates that some common species in urine, such as amino acids, ascorbic acid and creatine, have negligible effects on creatinine detection. The present method does not use expensive instruments, enzymes and separation technique. This method has the advantages of sensitivity, selectivity, simplicity, rapidity, and low cost. It holds great promise for basic or comprehensive metabolic panel, drug screening, anti-dopping, and urinary metabolomic/metabonomics research. Copyright © 2015 Elsevier B.V. All rights reserved.

  11. A case for change: disruption in academic medicine.

    PubMed

    Kahn, Marc J; Maurer, Ralph; Wartman, Steven A; Sachs, Benjamin P

    2014-09-01

    Disruptive technologies allow less expensive and more efficient processes to eventually dominate a market sector. The academic health center's tripartite mission of education, clinical care, and research is threatened by decreasing revenues and increasing expenses and is, as a result, ripe for disruption. The authors describe current disruptive technologies that threaten traditional operations at academic health centers and provide a prescription not only to survive, but also to prosper, in the face of disruptive forces.

  12. Anesthesiology training using 3D imaging and virtual reality

    NASA Astrophysics Data System (ADS)

    Blezek, Daniel J.; Robb, Richard A.; Camp, Jon J.; Nauss, Lee A.

    1996-04-01

    Current training for regional nerve block procedures by anesthesiology residents requires expert supervision and the use of cadavers; both of which are relatively expensive commodities in today's cost-conscious medical environment. We are developing methods to augment and eventually replace these training procedures with real-time and realistic computer visualizations and manipulations of the anatomical structures involved in anesthesiology procedures, such as nerve plexus injections (e.g., celiac blocks). The initial work is focused on visualizations: both static images and rotational renderings. From the initial results, a coherent paradigm for virtual patient and scene representation will be developed.

  13. Recent developments in sensing methods for eutrophying nutrients with a focus on automation for environmental applications.

    PubMed

    Duffy, G; Regan, F

    2017-11-20

    The demand for autonomous sensors for unattended, continuous nutrient monitoring in water is rapidly growing with the increasing need for more frequent and widespread environmental pollution monitoring. Legislative bodies, local authorities and industries all require frequent water quality monitoring, however, this is time and labour intensive, and an expensive undertaking. Autonomous sensors allow for frequent, unattended data collection. While this solves the time and labour intensive aspects of water monitoring, sensors can be very expensive. Development of low-cost sensors is essential to realise the concept of Internet of Things (IoT). However there is much work yet to be done in this field. This article reviews current literature on the research and development efforts towards deployable autonomous sensors for phosphorus (in the form of phosphate) and nitrogen (in the form of nitrate), with a focus on analytical performance and cost considerations. Additionally, some recent sensing approaches that could be automated in the future are included, along with an overview of approaches to monitoring both nutrients. These approaches are compared with standard laboratory methods and also with commercially available sensors for both phosphate and nitrate. Application of nutrient sensors in agriculture is discussed as an example of how sensor networks can provide improvements in decision making.

  14. Household catastrophic medical expenses in eastern China: determinants and policy implications

    PubMed Central

    2013-01-01

    Background Much of research on household catastrophic medical expenses in China has focused on less developed areas and little is known about this problem in more developed areas. This study aimed to analyse the incidence and determinants of catastrophic medical expenses in eastern China. Methods Data were obtained from a health care utilization and expense survey of 11,577 households conducted in eastern China in 2008. The incidence of household catastrophic medical expenses was calculated using the method introduced by the World Health Organization. A multi-level logistic regression model was used to identify the determinants. Results The incidence of household catastrophic medical expenses in eastern China ranged from 9.24% to 24.79%. Incidence of household catastrophic medical expenses was lower if the head of household had a higher level of education, labor insurance coverage, while the incidence was higher if they lived in rural areas, had a family member with chronic diseases, had a child younger than 5 years old, had a person at home who was at least 65 years old, and had a household member who was hospitalized. Moreover, the impact of the economic level on catastrophic medical expenses was non-linear. The poorest group had a lower incidence than that of the second lowest income group and the group with the highest income had a higher incidence than that of the second highest income group. In addition, region was a significant determinant. Conclusions Reducing the incidence of household catastrophic medical expenses should be one of the priorities of health policy. It can be achieved by improving residents’ health status to reduce avoidable health services such as hospitalization. It is also important to design more targeted health insurance in order to increase financial support for such vulnerable groups as the poor, chronically ill, children, and senior populations. PMID:24308317

  15. Constraints on the pre-impact orbits of Solar system giant impactors

    NASA Astrophysics Data System (ADS)

    Jackson, Alan P.; Gabriel, Travis S. J.; Asphaug, Erik I.

    2018-03-01

    We provide a fast method for computing constraints on impactor pre-impact orbits, applying this to the late giant impacts in the Solar system. These constraints can be used to make quick, broad comparisons of different collision scenarios, identifying some immediately as low-probability events, and narrowing the parameter space in which to target follow-up studies with expensive N-body simulations. We benchmark our parameter space predictions, finding good agreement with existing N-body studies for the Moon. We suggest that high-velocity impact scenarios in the inner Solar system, including all currently proposed single impact scenarios for the formation of Mercury, should be disfavoured. This leaves a multiple hit-and-run scenario as the most probable currently proposed for the formation of Mercury.

  16. Intrinsic Frequency and the Single Wave Biopsy

    PubMed Central

    Petrasek, Danny; Pahlevan, Niema M.; Tavallali, Peyman; Rinderknecht, Derek G.; Gharib, Morteza

    2015-01-01

    Insulin resistance is the hallmark of classical type II diabetes. In addition, insulin resistance plays a central role in metabolic syndrome, which astonishingly affects 1 out of 3 adults in North America. The insulin resistance state can precede the manifestation of diabetes and hypertension by years. Insulin resistance is correlated with a low-grade inflammatory condition, thought to be induced by obesity as well as other conditions. Currently, the methods to measure and monitor insulin resistance, such as the homeostatic model assessment and the euglycemic insulin clamp, can be impractical, expensive, and invasive. Abundant evidence exists that relates increased pulse pressure, pulse wave velocity (PWV), and vascular dysfunction with insulin resistance. We introduce a potential method of assessing insulin resistance that relies on a novel signal-processing algorithm, the intrinsic frequency method (IFM). The method requires a single pulse pressure wave, thus the term “ wave biopsy.” PMID:26183600

  17. Fluctuating ideal-gas lattice Boltzmann method with fluctuation dissipation theorem for nonvanishing velocities.

    PubMed

    Kaehler, G; Wagner, A J

    2013-06-01

    Current implementations of fluctuating ideal-gas descriptions with the lattice Boltzmann methods are based on a fluctuation dissipation theorem, which, while greatly simplifying the implementation, strictly holds only for zero mean velocity and small fluctuations. We show how to derive the fluctuation dissipation theorem for all k, which was done only for k=0 in previous derivations. The consistent derivation requires, in principle, locally velocity-dependent multirelaxation time transforms. Such an implementation is computationally prohibitively expensive but, with a small computational trick, it is feasible to reproduce the correct FDT without overhead in computation time. It is then shown that the previous standard implementations perform poorly for non vanishing mean velocity as indicated by violations of Galilean invariance of measured structure factors. Results obtained with the method introduced here show a significant reduction of the Galilean invariance violations.

  18. 47 CFR 32.4110 - Net current deferred nonoperating income taxes.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... CARRIER SERVICES UNIFORM SYSTEM OF ACCOUNTS FOR TELECOMMUNICATIONS COMPANIES Instructions for Balance Sheet Accounts § 32.4110 Net current deferred nonoperating income taxes. (a) This account shall include the balance of income tax expense resulting from comprehensive interpreted tax allocation which has...

  19. Neural Network for Positioning Space Station Solar Arrays

    NASA Technical Reports Server (NTRS)

    Graham, Ronald E.; Lin, Paul P.

    1994-01-01

    As a shuttle approaches the Space Station Freedom for a rendezvous, the shuttle's reaction control jet firings pose a risk of excessive plume impingement loads on Freedom solar arrays. The current solution to this problem, in which the arrays are locked in a feathered position prior to the approach, may be neither accurate nor robust, and is also expensive. An alternative solution is proposed here: the active control of Freedom's beta gimbals during the approach, positioning the arrays dynamically in such a way that they remain feathered relative to the shuttle jet most likely to cause an impingement load. An artificial neural network is proposed as a means of determining the gimbal angles that would drive plume angle of attack to zero. Such a network would be both accurate and robust, and could be less expensive to implement than the current solution. A network was trained via backpropagation, and results, which compare favorably to the current solution as well as to some other alternatives, are presented. Other training options are currently being evaluated.

  20. A fast CT reconstruction scheme for a general multi-core PC.

    PubMed

    Zeng, Kai; Bai, Erwei; Wang, Ge

    2007-01-01

    Expensive computational cost is a severe limitation in CT reconstruction for clinical applications that need real-time feedback. A primary example is bolus-chasing computed tomography (CT) angiography (BCA) that we have been developing for the past several years. To accelerate the reconstruction process using the filtered backprojection (FBP) method, specialized hardware or graphics cards can be used. However, specialized hardware is expensive and not flexible. The graphics processing unit (GPU) in a current graphic card can only reconstruct images in a reduced precision and is not easy to program. In this paper, an acceleration scheme is proposed based on a multi-core PC. In the proposed scheme, several techniques are integrated, including utilization of geometric symmetry, optimization of data structures, single-instruction multiple-data (SIMD) processing, multithreaded computation, and an Intel C++ compilier. Our scheme maintains the original precision and involves no data exchange between the GPU and CPU. The merits of our scheme are demonstrated in numerical experiments against the traditional implementation. Our scheme achieves a speedup of about 40, which can be further improved by several folds using the latest quad-core processors.

  1. A Fast CT Reconstruction Scheme for a General Multi-Core PC

    PubMed Central

    Zeng, Kai; Bai, Erwei; Wang, Ge

    2007-01-01

    Expensive computational cost is a severe limitation in CT reconstruction for clinical applications that need real-time feedback. A primary example is bolus-chasing computed tomography (CT) angiography (BCA) that we have been developing for the past several years. To accelerate the reconstruction process using the filtered backprojection (FBP) method, specialized hardware or graphics cards can be used. However, specialized hardware is expensive and not flexible. The graphics processing unit (GPU) in a current graphic card can only reconstruct images in a reduced precision and is not easy to program. In this paper, an acceleration scheme is proposed based on a multi-core PC. In the proposed scheme, several techniques are integrated, including utilization of geometric symmetry, optimization of data structures, single-instruction multiple-data (SIMD) processing, multithreaded computation, and an Intel C++ compilier. Our scheme maintains the original precision and involves no data exchange between the GPU and CPU. The merits of our scheme are demonstrated in numerical experiments against the traditional implementation. Our scheme achieves a speedup of about 40, which can be further improved by several folds using the latest quad-core processors. PMID:18256731

  2. Laparoscopic surgical treatment of umbilical hernia and small eventrations with prosthetic mesh using omentum overlay.

    PubMed

    Bratu, D; Sabău, A; Dumitra, A; Sabău, D; Miheţiu, A; Beli, L; Hulpuş, R

    2014-01-01

    Umbilical hernias and abdominal incisional hernias represent current pathologies which require numerous surgical alternative ways of treatment in prosthetic or non prosthetic,open or minimally invasive surgery. The method proposed by us is a less expensive option with no additional risks compared to other similar procedures as surgical technique. We conducted a retrospective study between 01.01.2008 - 01.06.2013 in which we considered a number of 23 patients with umbilical hernia and eventration, patients who received laparoscopic intraperitoneal polyester mesh covered with omentum, procedure applied at the IInd Surgery Clinic, Clinical County Emergency Hospital Sibiu. Out of 23 patients with postoperative umbilical hernia and eventration cases in which we used this surgical technique,16 were umbilical hernias and 7 post incisional hernias. The average time of surgery was 1 hour and 40 minutes, recording 4 postoperative complications remitted under conservative treatment, with a mean hospitalization of 4.1 days. Proepiploic laparoscopic treatment using omentum is a reliable alternative to a more expensive and difficult procedure involving Dual Mesh. Celsius.

  3. Large-scale expensive black-box function optimization

    NASA Astrophysics Data System (ADS)

    Rashid, Kashif; Bailey, William; Couët, Benoît

    2012-09-01

    This paper presents the application of an adaptive radial basis function method to a computationally expensive black-box reservoir simulation model of many variables. An iterative proxy-based scheme is used to tune the control variables, distributed for finer control over a varying number of intervals covering the total simulation period, to maximize asset NPV. The method shows that large-scale simulation-based function optimization of several hundred variables is practical and effective.

  4. Sensitivity Analysis for Coupled Aero-structural Systems

    NASA Technical Reports Server (NTRS)

    Giunta, Anthony A.

    1999-01-01

    A novel method has been developed for calculating gradients of aerodynamic force and moment coefficients for an aeroelastic aircraft model. This method uses the Global Sensitivity Equations (GSE) to account for the aero-structural coupling, and a reduced-order modal analysis approach to condense the coupling bandwidth between the aerodynamic and structural models. Parallel computing is applied to reduce the computational expense of the numerous high fidelity aerodynamic analyses needed for the coupled aero-structural system. Good agreement is obtained between aerodynamic force and moment gradients computed with the GSE/modal analysis approach and the same quantities computed using brute-force, computationally expensive, finite difference approximations. A comparison between the computational expense of the GSE/modal analysis method and a pure finite difference approach is presented. These results show that the GSE/modal analysis approach is the more computationally efficient technique if sensitivity analysis is to be performed for two or more aircraft design parameters.

  5. Simple, Sensitive and Accurate Multiplex Detection of Clinically Important Melanoma DNA Mutations in Circulating Tumour DNA with SERS Nanotags

    PubMed Central

    Wee, Eugene J.H.; Wang, Yuling; Tsao, Simon Chang-Hao; Trau, Matt

    2016-01-01

    Sensitive and accurate identification of specific DNA mutations can influence clinical decisions. However accurate diagnosis from limiting samples such as circulating tumour DNA (ctDNA) is challenging. Current approaches based on fluorescence such as quantitative PCR (qPCR) and more recently, droplet digital PCR (ddPCR) have limitations in multiplex detection, sensitivity and the need for expensive specialized equipment. Herein we describe an assay capitalizing on the multiplexing and sensitivity benefits of surface-enhanced Raman spectroscopy (SERS) with the simplicity of standard PCR to address the limitations of current approaches. This proof-of-concept method could reproducibly detect as few as 0.1% (10 copies, CV < 9%) of target sequences thus demonstrating the high sensitivity of the method. The method was then applied to specifically detect three important melanoma mutations in multiplex. Finally, the PCR/SERS assay was used to genotype cell lines and ctDNA from serum samples where results subsequently validated with ddPCR. With ddPCR-like sensitivity and accuracy yet at the convenience of standard PCR, we believe this multiplex PCR/SERS method could find wide applications in both diagnostics and research. PMID:27446486

  6. Simple, Sensitive and Accurate Multiplex Detection of Clinically Important Melanoma DNA Mutations in Circulating Tumour DNA with SERS Nanotags.

    PubMed

    Wee, Eugene J H; Wang, Yuling; Tsao, Simon Chang-Hao; Trau, Matt

    2016-01-01

    Sensitive and accurate identification of specific DNA mutations can influence clinical decisions. However accurate diagnosis from limiting samples such as circulating tumour DNA (ctDNA) is challenging. Current approaches based on fluorescence such as quantitative PCR (qPCR) and more recently, droplet digital PCR (ddPCR) have limitations in multiplex detection, sensitivity and the need for expensive specialized equipment. Herein we describe an assay capitalizing on the multiplexing and sensitivity benefits of surface-enhanced Raman spectroscopy (SERS) with the simplicity of standard PCR to address the limitations of current approaches. This proof-of-concept method could reproducibly detect as few as 0.1% (10 copies, CV < 9%) of target sequences thus demonstrating the high sensitivity of the method. The method was then applied to specifically detect three important melanoma mutations in multiplex. Finally, the PCR/SERS assay was used to genotype cell lines and ctDNA from serum samples where results subsequently validated with ddPCR. With ddPCR-like sensitivity and accuracy yet at the convenience of standard PCR, we believe this multiplex PCR/SERS method could find wide applications in both diagnostics and research.

  7. Demand-side management: Why ratemaking should`nt control tax policy

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Haney, J.D.

    1995-01-01

    As utilities spend money on demand-side management (DSM) programs, they usually deduct their costs currently as ordinary and necessary business expenses. However, state regulators may force deferral of DSM costs for ratemaking purposes, with possible consequences on tax returns. When regulators defer DSM costs, the Internal Revenue Service (IRS) has offered several theories to challenge current tax deductions. One theory requires capitilization instead of a current deduction if regulators include the DSM cost in rate base and provide for a rate of return on the balance. The IRS explained this theory two years ago in a White Paper on conservationmore » expenses: The direct relationship between a rate of return allowed by the Regulator for conservation expenditures allowed in rate base and future profits establishes a prima facie case for capitalization under the future benefit standard. The authors believe that IRS policy should not be linked to ratemaking decisions.« less

  8. Implementation options for DNA-based identification into ecological status assessment under the European Water Framework Directive.

    PubMed

    Hering, Daniel; Borja, Angel; Jones, J Iwan; Pont, Didier; Boets, Pieter; Bouchez, Agnes; Bruce, Kat; Drakare, Stina; Hänfling, Bernd; Kahlert, Maria; Leese, Florian; Meissner, Kristian; Mergen, Patricia; Reyjol, Yorick; Segurado, Pedro; Vogler, Alfried; Kelly, Martyn

    2018-07-01

    Assessment of ecological status for the European Water Framework Directive (WFD) is based on "Biological Quality Elements" (BQEs), namely phytoplankton, benthic flora, benthic invertebrates and fish. Morphological identification of these organisms is a time-consuming and expensive procedure. Here, we assess the options for complementing and, perhaps, replacing morphological identification with procedures using eDNA, metabarcoding or similar approaches. We rate the applicability of DNA-based identification for the individual BQEs and water categories (rivers, lakes, transitional and coastal waters) against eleven criteria, summarised under the headlines representativeness (for example suitability of current sampling methods for DNA-based identification, errors from DNA-based species detection), sensitivity (for example capability to detect sensitive taxa, unassigned reads), precision of DNA-based identification (knowledge about uncertainty), comparability with conventional approaches (for example sensitivity of metrics to differences in DNA-based identification), cost effectiveness and environmental impact. Overall, suitability of DNA-based identification is particularly high for fish, as eDNA is a well-suited sampling approach which can replace expensive and potentially harmful methods such as gill-netting, trawling or electrofishing. Furthermore, there are attempts to replace absolute by relative abundance in metric calculations. For invertebrates and phytobenthos, the main challenges include the modification of indices and completing barcode libraries. For phytoplankton, the barcode libraries are even more problematic, due to the high taxonomic diversity in plankton samples. If current assessment concepts are kept, DNA-based identification is least appropriate for macrophytes (rivers, lakes) and angiosperms/macroalgae (transitional and coastal waters), which are surveyed rather than sampled. We discuss general implications of implementing DNA-based identification into standard ecological assessment, in particular considering any adaptations to the WFD that may be required to facilitate the transition to molecular data. Copyright © 2018 Elsevier Ltd. All rights reserved.

  9. SOP: parallel surrogate global optimization with Pareto center selection for computationally expensive single objective problems

    DOE PAGES

    Krityakierne, Tipaluck; Akhtar, Taimoor; Shoemaker, Christine A.

    2016-02-02

    This paper presents a parallel surrogate-based global optimization method for computationally expensive objective functions that is more effective for larger numbers of processors. To reach this goal, we integrated concepts from multi-objective optimization and tabu search into, single objective, surrogate optimization. Our proposed derivative-free algorithm, called SOP, uses non-dominated sorting of points for which the expensive function has been previously evaluated. The two objectives are the expensive function value of the point and the minimum distance of the point to previously evaluated points. Based on the results of non-dominated sorting, P points from the sorted fronts are selected as centersmore » from which many candidate points are generated by random perturbations. Based on surrogate approximation, the best candidate point is subsequently selected for expensive evaluation for each of the P centers, with simultaneous computation on P processors. Centers that previously did not generate good solutions are tabu with a given tenure. We show almost sure convergence of this algorithm under some conditions. The performance of SOP is compared with two RBF based methods. The test results show that SOP is an efficient method that can reduce time required to find a good near optimal solution. In a number of cases the efficiency of SOP is so good that SOP with 8 processors found an accurate answer in less wall-clock time than the other algorithms did with 32 processors.« less

  10. The Need and Potential of Biosensors to Detect Dioxins and Dioxin-Like Polychlorinated Biphenyls along the Milk, Eggs and Meat Food Chain

    PubMed Central

    Chobtang, Jeerasak; de Boer, Imke J. M.; Hoogenboom, Ron L. A. P.; Haasnoot, Willem; Kijlstra, Aize; Meerburg, Bastiaan G.

    2011-01-01

    Dioxins and dioxin-like polychlorinated biphenyls (DL-PCBs) are hazardous toxic, ubiquitous and persistent chemical compounds, which can enter the food chain and accumulate up to higher trophic levels. Their determination requires sophisticated methods, expensive facilities and instruments, well-trained personnel and expensive chemical reagents. Ideally, real-time monitoring using rapid detection methods should be applied to detect possible contamination along the food chain in order to prevent human exposure. Sensor technology may be promising in this respect. This review gives the state of the art for detecting possible contamination with dioxins and DL-PCBs along the food chain of animal-source foods. The main detection methods applied (i.e., high resolution gas-chromatography combined with high resolution mass-spectrometry (HRGC/HRMS) and the chemical activated luciferase gene expression method (CALUX bioassay)), each have their limitations. Biosensors for detecting dioxins and related compounds, although still under development, show potential to overcome these limitations. Immunosensors and biomimetic-based biosensors potentially offer increased selectivity and sensitivity for dioxin and DL-PCB detection, while whole cell-based biosensors present interpretable biological results. The main shortcoming of current biosensors, however, is their detection level: this may be insufficient as limits for dioxins and DL-PCBs for food and feedstuffs are in pg per gram level. In addition, these contaminants are normally present in fat, a difficult matrix for biosensor detection. Therefore, simple and efficient extraction and clean-up procedures are required which may enable biosensors to detect dioxins and DL-PCBs contamination along the food chain. PMID:22247688

  11. The need and potential of biosensors to detect dioxins and dioxin-like polychlorinated biphenyls along the milk, eggs and meat food chain.

    PubMed

    Chobtang, Jeerasak; de Boer, Imke J M; Hoogenboom, Ron L A P; Haasnoot, Willem; Kijlstra, Aize; Meerburg, Bastiaan G

    2011-01-01

    Dioxins and dioxin-like polychlorinated biphenyls (DL-PCBs) are hazardous toxic, ubiquitous and persistent chemical compounds, which can enter the food chain and accumulate up to higher trophic levels. Their determination requires sophisticated methods, expensive facilities and instruments, well-trained personnel and expensive chemical reagents. Ideally, real-time monitoring using rapid detection methods should be applied to detect possible contamination along the food chain in order to prevent human exposure. Sensor technology may be promising in this respect. This review gives the state of the art for detecting possible contamination with dioxins and DL-PCBs along the food chain of animal-source foods. The main detection methods applied (i.e., high resolution gas-chromatography combined with high resolution mass-spectrometry (HRGC/HRMS) and the chemical activated luciferase gene expression method (CALUX bioassay)), each have their limitations. Biosensors for detecting dioxins and related compounds, although still under development, show potential to overcome these limitations. Immunosensors and biomimetic-based biosensors potentially offer increased selectivity and sensitivity for dioxin and DL-PCB detection, while whole cell-based biosensors present interpretable biological results. The main shortcoming of current biosensors, however, is their detection level: this may be insufficient as limits for dioxins and DL-PCBs for food and feedstuffs are in pg per gram level. In addition, these contaminants are normally present in fat, a difficult matrix for biosensor detection. Therefore, simple and efficient extraction and clean-up procedures are required which may enable biosensors to detect dioxins and DL-PCBs contamination along the food chain.

  12. HEADROOM BEYOND THE QUALITY- ADJUSTED LIFE-YEAR: THE CASE OF COMPLEX PEDIATRIC NEUROLOGY.

    PubMed

    van Nimwegen, Kirsten J M; Lilford, Richard J; van der Wilt, Gert J; Grutters, Janneke P C

    2017-01-01

    The headroom method was introduced for the very early evaluation of the potential value of new technologies. It allows for establishing a ceiling price for technologies to still be cost-effective by combining the maximum effect a technology might yield, the maximum willingness-to-pay (WTP) for this effect, and potential downstream expenses and savings. Although the headroom method is QALY-based, not all innovations are expected to result in QALY gain. This study explores the feasibility and usefulness of the headroom method in the evaluation of technologies that are unlikely to result in QALY gain. This will be illustrated with the diagnostic trajectory of complex pediatric neurology (CPN). Our headroom analysis showed a large room for improvement in the current diagnostic trajectory of CPN in terms of diagnostic yield. Combining this with a maximum WTP value for an additional diagnosis and the potential downstream expenses and savings, resulted in a total headroom of €15,028. This indicates that a new technology in this particular diagnostic trajectory, might be cost-effective as long as its costs do not exceed €15,028. The headroom method seems a useful tool in the very early evaluation of medical technologies, also in cases when immediate QALY gain is unlikely. It allows for allocating healthcare resources to those technologies that are most promising. It should be kept in mind, however, that the headroom assumes an optimistic scenario, and for that reason cannot guarantee future cost-effectiveness. It might be most useful for ruling out those technologies that are unlikely to be cost-effective.

  13. Verification of International Space Station Component Leak Rates by Helium Accumulation Method

    NASA Technical Reports Server (NTRS)

    Underwood, Steve D.; Smith, Sherry L.

    2003-01-01

    Discovery of leakage on several International Space Station U.S. Laboratory Module ammonia system quick disconnects (QDs) led to the need for a process to quantify total leakage without removing the QDs from the system. An innovative solution was proposed allowing quantitative leak rate measurement at ambient external pressure without QD removal. The method utilizes a helium mass spectrometer configured in the detector probe mode to determine helium leak rates inside a containment hood installed on the test component. The method was validated through extensive developmental testing. Test results showed the method was viable, accurate and repeatable for a wide range of leak rates. The accumulation method has been accepted by NASA and is currently being used by Boeing Huntsville, Boeing Kennedy Space Center and Boeing Johnson Space Center to test welds and valves and will be used by Alenia to test the Cupola. The method has been used in place of more expensive vacuum chamber testing which requires removing the test component from the system.

  14. Cost comparison of axillary sentinel lymph node detection and axillary lymphadenectomy in early breast cancer. A national study based on a prospective multi-institutional series of 985 patients ‘on behalf of the Group of Surgeons from the French Unicancer Federation’

    PubMed Central

    Classe, J. M.; Baffert, S.; Sigal-Zafrani, B.; Fall, M.; Rousseau, C.; Alran, S.; Rouanet, P.; Belichard, C.; Mignotte, H.; Ferron, G.; Marchal, F.; Giard, S.; Tunon de Lara, C.; Le Bouedec, G.; Cuisenier, J.; Werner, R.; Raoust, I.; Rodier, J.-F.; Laki, F.; Colombo, P.-E.; Lasry, S.; Faure, C.; Charitansky, H.; Olivier, J.-B.; Chauvet, M.-P.; Bussières, E.; Gimbergues, P.; Flipo, B.; Houvenaeghel, G.; Dravet, F.; Livartowski, A.

    2012-01-01

    Background: Our objective was to assess the global cost of the sentinel lymph node detection [axillary sentinel lymph node detection (ASLND)] compared with standard axillary lymphadenectomy [axillary lymph node dissection (ALND)] for early breast cancer patients. Patients and methods: We conducted a prospective, multi-institutional, observational, cost comparative analysis. Cost calculations were realized with the micro-costing method from the diagnosis until 1 month after the last surgery. Results: Eight hundred and thirty nine patients were included in the ASLND group and 146 in the ALND group. The cost generated for a patient with an ASLND, with one preoperative scintigraphy, a combined method for sentinel node detection, an intraoperative pathological analysis without lymphadenectomy, was lower than the cost generated for a patient with lymphadenectomy [€2947 (σ = 580) versus €3331 (σ = 902); P = 0.0001]. Conclusion: ASLND, involving expensive techniques, was finally less expensive than ALND. The length of hospital stay was the cost driver of these procedures. The current observational study points the heterogeneous practices for this validated and largely diffused technique. Several technical choices have an impact on the cost of ASLND, as intraoperative analysis allowing to reduce rehospitalization rate for secondary lymphadenectomy or preoperative scintigraphy, suggesting possible savings on hospital resources. PMID:21896543

  15. Pseudo-Random Modulation of a Laser Diode for Generating Ultrasonic Longitudinal Waves

    NASA Technical Reports Server (NTRS)

    Madaras, Eric I.; Anatasi, Robert F.

    2004-01-01

    Laser generated ultrasound systems have historically been more complicated and expensive than conventional piezoelectric based systems, and this fact has relegated the acceptance of laser based systems to niche applications for which piezoelectric based systems are less suitable. Lowering system costs, while improving throughput, increasing ultrasound signal levels, and improving signal-to-noise are goals which will help increase the general acceptance of laser based ultrasound. One current limitation with conventional laser generated ultrasound is a material s damage threshold limit. Increasing the optical power to generate more signal eventually damages the material being tested due to rapid, high heating. Generation limitations for laser based ultrasound suggests the use of pulse modulation techniques as an alternate generation method. Pulse modulation techniques can spread the laser energy over time or space, thus reducing laser power densities and minimizing damage. Previous experiments by various organizations using spatial or temporal pulse modulation have been shown to generate detectable surface, plate, and bulk ultrasonic waves with narrow frequency bandwidths . Using narrow frequency bandwidths improved signal detectability, but required the use of expensive and powerful lasers and opto-electronic systems. The use of a laser diode to generate ultrasound is attractive because of its low cost, small size, light weight, simple optics and modulation capability. The use of pulse compression techniques should allow certain types of laser diodes to produce usable ultrasonic signals. The method also does not need to be limited to narrow frequency bandwidths. The method demonstrated here uses a low power laser diode (approximately 150 mW) that is modulated by controlling the diode s drive current and the resulting signal is recovered by cross correlation. A potential application for this system which is briefly demonstrated is in detecting signals in thick composite materials where attenuation is high and signal amplitude and bandwidth are at a premium.

  16. Emergency response to landslide using GNSS measurements and UAV

    NASA Astrophysics Data System (ADS)

    Nikolakopoulos, Konstantinos G.; Koukouvelas, Ioannis K.

    2017-10-01

    Landslide monitoring can be performed using many different methods: Classical geotechnical measurements like inclinometer, topographical survey measurements with total stations or GNSS sensors and photogrammetric techniques using airphotos or high resolution satellite images. However all these methods are expensive or difficult to be developed immediately after the landslide triggering. In contrast airborne technology and especially the use of Unmanned Aerial Vehicles (UAVs) make response to landslide disaster easier as UAVs can be launched quickly in dangerous terrains and send data about the sliding areas to responders on the ground either as RGB images or as videos. In addition, the emergency response to landslide is critical for the further monitoring. For proper displacement identification all the above mentioned monitoring methods need a high resolution and a very accurate representation of the relief. The ideal solution for the accurate and quick mapping of a landslide is the combined use of UAV's photogrammetry and GNSS measurements. UAVs have started their development as expensive toys but they currently became a very valuable tool in large scale mapping of sliding areas. The purpose of this work is to demonstrate an effective solution for the initial landslide mapping immediately after the occurrence of the phenomenon and the possibility of the periodical assessment of the landslide. Three different landslide cases from Greece are presented in the current study. All three landslides have different characteristics: occurred in different geomorphologic environments, triggered by different causes and had different geologic bedrock. In all three cases we performed detailed GNSS measurements of the landslide area, we generated orthophotos as well as Digital Surface Models (DSMs) at an accuracy of less than +/-10 cm. Slide direction and velocity, mass balances as well as protection and mitigation measurements can be derived from the application of the UAVs. Those data in addition are accurate, cost- and time-effective.

  17. 30 CFR 206.180 - How do I determine an actual processing allowance?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... maintenance expenses, overhead, and either depreciation and a return on undepreciated capital investment (in... allowable expenses. (iv) You may use either depreciation with a return on undepreciable capital investment or a return on depreciable capital investment. After you elect to use either method for a processing...

  18. 26 CFR 1.911-6 - Disallowance of deductions, exclusions, and credits.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... related to a class of gross income are personal and family medical expenses, qualified retirement... place of work is in a foreign country, deductible moving expenses will be allocable to foreign earned... received or accrued. This rule applies for all individuals, regardless of their method of accounting. (iii...

  19. 26 CFR 1.481-2 - Limitation on tax.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... sales were $32,000. Total deductible business expenses were $5,000. There were no receivables or... expenses 5,000 Business income 6,000 Personal exemption and itemized deductions 1,600 Taxable income 4,400... method of accounting by an electing small business corporation under subchapter S, chapter 1 of the Code...

  20. The Financial Impact of the ‘Zero-Markup Policy for Essential Drugs’ on Patients in County Hospitals in Western Rural China

    PubMed Central

    Zhou, Zhongliang; Su, Yanfang; Campbell, Benjamin; Zhou, Zhiying; Gao, Jianmin; Yu, Qiang; Chen, Jiuhao; Pan, Yishan

    2015-01-01

    Objective With a quasi-experimental design, this study aims to assess whether the Zero-markup Policy for Essential Drugs (ZPED) reduces the medical expense for patients at county hospitals, the major healthcare provider in rural China. Methods Data from Ningshan county hospital and Zhenping county hospital, China, include 2014 outpatient records and 9239 inpatient records. Quantitative methods are employed to evaluate ZPED. Both hospital-data difference-in-differences and individual-data regressions are applied to analyze the data from inpatient and outpatient departments. Results In absolute terms, the total expense per visit reduced by 19.02 CNY (3.12 USD) for outpatient services and 399.6 CNY (65.60 USD) for inpatient services. In relative terms, the expense per visit was reduced by 11% for both outpatient and inpatient services. Due to the reduction of inpatient expense, the estimated reduction of outpatient visits is 2% among the general population and 3.39% among users of outpatient services. The drug expense per visit dropped by 27.20 CNY (4.47 USD) for outpatient services and 278.7 CNY (45.75 USD) for inpatient services. The proportion of drug expense out of total expense per visit dropped by 11.73 percentage points in outpatient visits and by 3.92 percentage points in inpatient visits. Conclusion Implementation of ZPED is a benefit for patients in both absolute and relative terms. The absolute monetary reduction of the per-visit inpatient expense is 20 times of that in outpatient care. According to cross-price elasticity, the substitution between inpatient and outpatient due to the change in inpatient price is small. Furthermore, given that the relative reductions are the same for outpatient and inpatient visits, according to relative thinking theory, the incentive to utilize outpatient or inpatient care attributed to ZPED is equivalent, regardless of the 20-times price difference in absolute terms. PMID:25790443

  1. Comparative study of the effectiveness and limitations of current methods for detecting sequence coevolution.

    PubMed

    Mao, Wenzhi; Kaya, Cihan; Dutta, Anindita; Horovitz, Amnon; Bahar, Ivet

    2015-06-15

    With rapid accumulation of sequence data on several species, extracting rational and systematic information from multiple sequence alignments (MSAs) is becoming increasingly important. Currently, there is a plethora of computational methods for investigating coupled evolutionary changes in pairs of positions along the amino acid sequence, and making inferences on structure and function. Yet, the significance of coevolution signals remains to be established. Also, a large number of false positives (FPs) arise from insufficient MSA size, phylogenetic background and indirect couplings. Here, a set of 16 pairs of non-interacting proteins is thoroughly examined to assess the effectiveness and limitations of different methods. The analysis shows that recent computationally expensive methods designed to remove biases from indirect couplings outperform others in detecting tertiary structural contacts as well as eliminating intermolecular FPs; whereas traditional methods such as mutual information benefit from refinements such as shuffling, while being highly efficient. Computations repeated with 2,330 pairs of protein families from the Negatome database corroborated these results. Finally, using a training dataset of 162 families of proteins, we propose a combined method that outperforms existing individual methods. Overall, the study provides simple guidelines towards the choice of suitable methods and strategies based on available MSA size and computing resources. Software is freely available through the Evol component of ProDy API. © The Author 2015. Published by Oxford University Press.

  2. Blind detection of isolated astrophysical pulses in the spatial Fourier transform domain

    NASA Astrophysics Data System (ADS)

    Schmid, Natalia A.; Prestage, Richard M.

    2018-07-01

    We present a novel approach for the detection of isolated transients in pulsar surveys and fast radio transient observations. Rather than the conventional approach of performing a computationally expensive blind dispersion measure search, we take the spatial Fourier transform (SFT) of short (˜ few seconds) sections of data. A transient will have a characteristic signature in the SFT domain, and we present a blind statistic which may be used to detect this signature at an empirical zero false alarm rate. The method has been evaluated using simulations, and also applied to two fast radio burst observations. In addition to its use for current observations, we expect this method will be extremely beneficial for future multibeam observations made by telescopes equipped with phased array feeds.

  3. Closing the Gaps in Offshore P&A: Lessons Learned From the North Sea

    NASA Astrophysics Data System (ADS)

    Torsater, M.

    2017-12-01

    This talk will give an overview of the major challenges related to offshore well plugging and abandonment (P&A) with examples from the North Sea. The talk will outline why today's P&A operations are so time consuming and expensive, and it will point out current technology gaps and issues related to standards and regulations in the North Sea countries. Emerging P&A solutions will be discussed, and results from large ongoing research projects in Norway will be shared. Special emphasis will be given to promising new concepts, such as using creeping shale formations as permanent well barriers, and using thermal methods for removal of tubing and casing. The long-term aspects of well plugging will also be discussed, together with methods available for minimizing leakage risk.

  4. Blind detection of isolated astrophysical pulses in the spatial Fourier transform domain

    NASA Astrophysics Data System (ADS)

    Schmid, Natalia A.; Prestage, Richard M.

    2018-04-01

    We present a novel approach for the detection of isolated transients in pulsar surveys and fast radio transient observations. Rather than the conventional approach of performing a computationally expensive blind DM search, we take the spatial Fourier transform (SFT) of short (˜ few seconds) sections of data. A transient will have a characteristic signature in the SFT domain, and we present a blind statistic which may be used to detect this signature at an empirical zero False Alarm Rate (FAR). The method has been evaluated using simulations, and also applied to two fast radio burst observations. In addition to its use for current observations, we expect this method will be extremely beneficial for future multi-beam observations made by telescopes equipped with phased array feeds.

  5. A system of containment to prevent oil spills from sunken tankers.

    PubMed

    García-Olivares, Antonio; Agüero, Almudena; Haupt, Bernd J; Marcos, María J; Villar, María V; de Pablos, José L

    2017-09-01

    Worldwide tank spills represent 10% of the average annual input of oil in the sea. When such spills arise from wrecks at depth, neutralisation of environmental impacts is difficult to achieve. Extracting oil from sunken tankers is expensive, and, unfortunately, all of the oil cannot be extracted, as the Prestige case demonstrates. We propose an environmentally appropriate, cost-effective and proactive method to stop the long-term problem of leaks from sunken tankers similar to the Prestige. This method confines the wreck with a "sediment" capping of sepiolite mineral that emulates a natural sediment. A set of experiments and simulations shows that sepiolite has the characteristics necessary to accomplish the confinement of any current or future sunken tanker with minimal environmental perturbation. Copyright © 2017 Elsevier B.V. All rights reserved.

  6. Improving the Aircraft Design Process Using Web-Based Modeling and Simulation

    NASA Technical Reports Server (NTRS)

    Reed, John A.; Follen, Gregory J.; Afjeh, Abdollah A.; Follen, Gregory J. (Technical Monitor)

    2000-01-01

    Designing and developing new aircraft systems is time-consuming and expensive. Computational simulation is a promising means for reducing design cycle times, but requires a flexible software environment capable of integrating advanced multidisciplinary and multifidelity analysis methods, dynamically managing data across heterogeneous computing platforms, and distributing computationally complex tasks. Web-based simulation, with its emphasis on collaborative composition of simulation models, distributed heterogeneous execution, and dynamic multimedia documentation, has the potential to meet these requirements. This paper outlines the current aircraft design process, highlighting its problems and complexities, and presents our vision of an aircraft design process using Web-based modeling and simulation.

  7. Improving the Aircraft Design Process Using Web-based Modeling and Simulation

    NASA Technical Reports Server (NTRS)

    Reed, John A.; Follen, Gregory J.; Afjeh, Abdollah A.

    2003-01-01

    Designing and developing new aircraft systems is time-consuming and expensive. Computational simulation is a promising means for reducing design cycle times, but requires a flexible software environment capable of integrating advanced multidisciplinary and muitifidelity analysis methods, dynamically managing data across heterogeneous computing platforms, and distributing computationally complex tasks. Web-based simulation, with its emphasis on collaborative composition of simulation models, distributed heterogeneous execution, and dynamic multimedia documentation, has the potential to meet these requirements. This paper outlines the current aircraft design process, highlighting its problems and complexities, and presents our vision of an aircraft design process using Web-based modeling and simulation.

  8. Statistical Emulator for Expensive Classification Simulators

    NASA Technical Reports Server (NTRS)

    Ross, Jerret; Samareh, Jamshid A.

    2016-01-01

    Expensive simulators prevent any kind of meaningful analysis to be performed on the phenomena they model. To get around this problem the concept of using a statistical emulator as a surrogate representation of the simulator was introduced in the 1980's. Presently, simulators have become more and more complex and as a result running a single example on these simulators is very expensive and can take days to weeks or even months. Many new techniques have been introduced, termed criteria, which sequentially select the next best (most informative to the emulator) point that should be run on the simulator. These criteria methods allow for the creation of an emulator with only a small number of simulator runs. We follow and extend this framework to expensive classification simulators.

  9. Detecting non-orthology in the COGs database and other approaches grouping orthologs using genome-specific best hits.

    PubMed

    Dessimoz, Christophe; Boeckmann, Brigitte; Roth, Alexander C J; Gonnet, Gaston H

    2006-01-01

    Correct orthology assignment is a critical prerequisite of numerous comparative genomics procedures, such as function prediction, construction of phylogenetic species trees and genome rearrangement analysis. We present an algorithm for the detection of non-orthologs that arise by mistake in current orthology classification methods based on genome-specific best hits, such as the COGs database. The algorithm works with pairwise distance estimates, rather than computationally expensive and error-prone tree-building methods. The accuracy of the algorithm is evaluated through verification of the distribution of predicted cases, case-by-case phylogenetic analysis and comparisons with predictions from other projects using independent methods. Our results show that a very significant fraction of the COG groups include non-orthologs: using conservative parameters, the algorithm detects non-orthology in a third of all COG groups. Consequently, sequence analysis sensitive to correct orthology assignments will greatly benefit from these findings.

  10. Antibody biosensors for spoilage yeast detection based on impedance spectroscopy.

    PubMed

    Tubía, I; Paredes, J; Pérez-Lorenzo, E; Arana, S

    2018-04-15

    Brettanomyces is a yeast species responsible for wine and cider spoilage, producing volatile phenols that result in off-odors and loss of fruity sensorial qualities. Current commercial detection methods for these spoilage species are liable to frequent false positives, long culture times and fungal contamination. In this work, an interdigitated (IDE) biosensor was created to detect Brettanomyces using immunological reactions and impedance spectroscopy analysis. To promote efficient antibody immobilization on the electrodes' surface and to decrease non-specific adsorption, a Self-Assembled Monolayer (SAM) was developed. An impedance spectroscopy analysis, over four yeast strains, confirmed our device's increased efficacy. Compared to label-free sensors, antibody biosensors showed a higher relative impedance. The results also suggested that these biosensors could be a promising method to monitor some spoilage yeasts, offering an efficient alternative to the laborious and expensive traditional methods. Copyright © 2017 Elsevier B.V. All rights reserved.

  11. Asteroids as Propulsion Systems of Space Ships

    NASA Technical Reports Server (NTRS)

    Bolonkin, Alexander

    2003-01-01

    Currently, rockets are used to change the trajectory of space ships and probes. This method is very expensive and requires a lot of fuel, which limits the feasibility of space stations, interplanetary space ships, and probes. Sometimes space probes use the gravity field of a planet However, there am only nine planets in the Solar System, all separated by great distances. There are tons of millions of asteroids in outer space. This paper offers a revolutionary method for changing the trajectory of space probes. The method uses the kinetic or rotary energy of asteroids, comet nuclei, meteorites or other space bodies (small planets, natural planetary satellites, space debris, etc.) to increase (to decrease) ship (probe) speed up to 1000 m/sec (or more) and to achieve any new direction in outer space. The flight possibilities of space ships and probes are increased by a factor of millions.

  12. Multi-objective Optimization Strategies Using Adjoint Method and Game Theory in Aerodynamics

    NASA Astrophysics Data System (ADS)

    Tang, Zhili

    2006-08-01

    There are currently three different game strategies originated in economics: (1) Cooperative games (Pareto front), (2) Competitive games (Nash game) and (3) Hierarchical games (Stackelberg game). Each game achieves different equilibria with different performance, and their players play different roles in the games. Here, we introduced game concept into aerodynamic design, and combined it with adjoint method to solve multi-criteria aerodynamic optimization problems. The performance distinction of the equilibria of these three game strategies was investigated by numerical experiments. We computed Pareto front, Nash and Stackelberg equilibria of the same optimization problem with two conflicting and hierarchical targets under different parameterizations by using the deterministic optimization method. The numerical results show clearly that all the equilibria solutions are inferior to the Pareto front. Non-dominated Pareto front solutions are obtained, however the CPU cost to capture a set of solutions makes the Pareto front an expensive tool to the designer.

  13. Subsidizing Private Education at Taxpayer Expense. Policy Brief

    ERIC Educational Resources Information Center

    National Education Association, 2017

    2017-01-01

    Efforts to subsidize private education take a variety of forms, with the most familiar being the private school voucher provided directly to parents. But there are other less direct ways governments subsidize private schools. One such method is to provide a tax credit to parents to offset their personal education expenses (education tax credit).…

  14. 26 CFR 1.466-2 - Special protective election for certain taxpayers.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... which would not be treated as qualified discount coupons under Code section 466. Third, certain expenses... years), even though such expenses would not be deductible under Code section 466. (b) Requirements. In... method provided in § 1.451-4 or its predecessors under the Internal Revenue Code of 1954; (2) The...

  15. 26 CFR 1.466-2 - Special protective election for certain taxpayers.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... which would not be treated as qualified discount coupons under Code section 466. Third, certain expenses... years), even though such expenses would not be deductible under Code section 466. (b) Requirements. In... method provided in § 1.451-4 or its predecessors under the Internal Revenue Code of 1954; (2) The...

  16. 26 CFR 1.466-2 - Special protective election for certain taxpayers.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... which would not be treated as qualified discount coupons under Code section 466. Third, certain expenses... years), even though such expenses would not be deductible under Code section 466. (b) Requirements. In... method provided in § 1.451-4 or its predecessors under the Internal Revenue Code of 1954; (2) The...

  17. 26 CFR 1.466-2 - Special protective election for certain taxpayers.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... which would not be treated as qualified discount coupons under Code section 466. Third, certain expenses... years), even though such expenses would not be deductible under Code section 466. (b) Requirements. In... method provided in § 1.451-4 or its predecessors under the Internal Revenue Code of 1954; (2) The...

  18. Concurrent Validity of the Psychopathic Personality Inventory with Offender and Community Samples

    ERIC Educational Resources Information Center

    Malterer, Melanie B.; Lilienfeld, Scott O.; Neumann, Craig S.; Newman, Joseph P.

    2010-01-01

    The Psychopathy Checklist-Revised (PCL-R) is a frequently used and well-validated measure of psychopathy but is relatively time-intensive and expensive to administer. The Psychopathic Personality Inventory (PPI) is a self-report measure that provides a less time-intensive and less expensive method for identifying psychopathic individuals. Using…

  19. Electrical bioimpedance and other techniques for gastric emptying and motility evaluation

    PubMed Central

    Huerta-Franco, María Raquel; Vargas-Luna, Miguel; Montes-Frausto, Juana Berenice; Flores-Hernández, Corina; Morales-Mata, Ismael

    2012-01-01

    The aim of this article is to identify non-invasive, inexpensive, highly sensitive and accurate techniques for evaluating and diagnosing gastric diseases. In the case of the stomach, there are highly sensitive and specific methods for assessing gastric motility and emptying (GME). However, these methods are invasive, expensive and/or not technically feasible for all clinicians and patients. We present a summary of the most relevant international information on non-invasive methods and techniques for clinically evaluating GME. We particularly emphasize the potential of gastric electrical bioimpedance (EBI). EBI was initially used mainly in gastric emptying studies and was essentially abandoned in favor of techniques such as electrogastrography and the gold standard, scintigraphy. The current research evaluating the utility of gastric EBI either combines this technique with other frequently used techniques or uses new methods for gastric EBI signal analysis. In this context, we discuss our results and those of other researchers who have worked with gastric EBI. In this review article, we present the following topics: (1) a description of the oldest methods and procedures for evaluating GME; (2) an explanation of the methods currently used to evaluate gastric activity; and (3) a perspective on the newest trends and techniques in clinical and research GME methods. We conclude that gastric EBI is a highly effective non-invasive, easy to use and inexpensive technique for assessing GME. PMID:22368782

  20. A Modified EPA Method 1623 that Uses Tangential Flow Hollow-fiber Ultrafiltration and Heat Dissociation Steps to Detect Waterborne Cryptosporidium and Giardia spp.

    PubMed Central

    Rhodes, Eric R.; Villegas, Leah Fohl; Shaw, Nancy J.; Miller, Carrie; Villegas, Eric N.

    2012-01-01

    Cryptosporidium and Giardia species are two of the most prevalent protozoa that cause waterborne diarrheal disease outbreaks worldwide. To better characterize the prevalence of these pathogens, EPA Method 1623 was developed and used to monitor levels of these organisms in US drinking water supplies 12. The method has three main parts; the first is the sample concentration in which at least 10 L of raw surface water is filtered. The organisms and trapped debris are then eluted from the filter and centrifuged to further concentrate the sample. The second part of the method uses an immunomagnetic separation procedure where the concentrated water sample is applied to immunomagnetic beads that specifically bind to the Cryptosporidium oocysts and Giardia cysts allowing for specific removal of the parasites from the concentrated debris. These (oo)cysts are then detached from the magnetic beads by an acid dissociation procedure. The final part of the method is the immunofluorescence staining and enumeration where (oo)cysts are applied to a slide, stained, and enumerated by microscopy. Method 1623 has four listed sample concentration systems to capture Cryptosporidium oocysts and Giardia cysts in water: Envirochek filters (Pall Corporation, Ann Arbor, MI), Envirochek HV filters (Pall Corporation), Filta-Max filters (IDEXX, Westbrook, MA), or Continuous Flow Centrifugation (Haemonetics, Braintree, MA). However, Cryptosporidium and Giardia (oo)cyst recoveries have varied greatly depending on the source water matrix and filters used1,14. A new tangential flow hollow-fiber ultrafiltration (HFUF) system has recently been shown to be more efficient and more robust at recovering Cryptosporidium oocystsand Giardia cysts from various water matrices; moreover, it is less expensive than other capsule filter options and can concentrate multiple pathogens simultaneously1-3,5-8,10,11. In addition, previous studies by Hill and colleagues demonstrated that the HFUF significantly improved Cryptosporidium oocysts recoveries when directly compared with the Envirochek HV filters4. Additional modifications to the current methods have also been reported to improve method performance. Replacing the acid dissociation procedure with heat dissociation was shown to be more effective at separating Cryptosporidium from the magnetic beads in some matrices9,13 . This protocol describes a modified Method 1623 that uses the new HFUF filtration system with the heat dissociation step. The use of HFUF with this modified Method is a less expensive alternative to current EPA Method 1623 filtration options and provides more flexibility by allowing the concentration of multiple organisms. PMID:22805201

  1. Performance Evaluation of Peer-to-Peer Progressive Download in Broadband Access Networks

    NASA Astrophysics Data System (ADS)

    Shibuya, Megumi; Ogishi, Tomohiko; Yamamoto, Shu

    P2P (Peer-to-Peer) file sharing architectures have scalable and cost-effective features. Hence, the application of P2P architectures to media streaming is attractive and expected to be an alternative to the current video streaming using IP multicast or content delivery systems because the current systems require expensive network infrastructures and large scale centralized cache storage systems. In this paper, we investigate the P2P progressive download enabling Internet video streaming services. We demonstrated the capability of the P2P progressive download in both laboratory test network as well as in the Internet. Through the experiments, we clarified the contribution of the FTTH links to the P2P progressive download in the heterogeneous access networks consisting of FTTH and ADSL links. We analyzed the cause of some download performance degradation occurred in the experiment and discussed about the effective methods to provide the video streaming service using P2P progressive download in the current heterogeneous networks.

  2. Multiple Frequency Audio Signal Communication as a Mechanism for Neurophysiology and Video Data Synchronization

    PubMed Central

    Topper, Nicholas C.; Burke, S.N.; Maurer, A.P.

    2014-01-01

    BACKGROUND Current methods for aligning neurophysiology and video data are either prepackaged, requiring the additional purchase of a software suite, or use a blinking LED with a stationary pulse-width and frequency. These methods lack significant user interface for adaptation, are expensive, or risk a misalignment of the two data streams. NEW METHOD A cost-effective means to obtain high-precision alignment of behavioral and neurophysiological data is obtained by generating an audio-pulse embedded with two domains of information, a low-frequency binary-counting signal and a high, randomly changing frequency. This enabled the derivation of temporal information while maintaining enough entropy in the system for algorithmic alignment. RESULTS The sample to frame index constructed using the audio input correlation method described in this paper enables video and data acquisition to be aligned at a sub-frame level of precision. COMPARISONS WITH EXISTING METHOD Traditionally, a synchrony pulse is recorded on-screen via a flashing diode. The higher sampling rate of the audio input of the camcorder enables the timing of an event to be detected with greater precision. CONCLUSIONS While On-line analysis and synchronization using specialized equipment may be the ideal situation in some cases, the method presented in the current paper presents a viable, low cost alternative, and gives the flexibility to interface with custom off-line analysis tools. Moreover, the ease of constructing and implements this set-up presented in the current paper makes it applicable to a wide variety of applications that require video recording. PMID:25256648

  3. Nonlinear spectroscopy of trapped ions

    NASA Astrophysics Data System (ADS)

    Schlawin, Frank; Gessner, Manuel; Mukamel, Shaul; Buchleitner, Andreas

    2014-08-01

    Nonlinear spectroscopy employs a series of laser pulses to interrogate dynamics in large interacting many-body systems, and it has become a highly successful method for experiments in chemical physics. Current quantum optical experiments approach system sizes and levels of complexity that require the development of efficient techniques to assess spectral and dynamical features with scalable experimental overhead. However, established methods from optical spectroscopy of macroscopic ensembles cannot be applied straightforwardly to few-atom systems. Based on the ideas proposed in M. Gessner et al., (arXiv:1312.3365), we develop a diagrammatic approach to construct nonlinear measurement protocols for controlled quantum systems, and we discuss experimental implementations with trapped ion technology in detail. These methods, in combination with distinct features of ultracold-matter systems, allow us to monitor and analyze excitation dynamics in both the electronic and vibrational degrees of freedom. They are independent of system size, and they can therefore reliably probe systems in which, e.g., quantum state tomography becomes prohibitively expensive. We propose signals that can probe steady-state currents, detect the influence of anharmonicities on phonon transport, and identify signatures of chaotic dynamics near a quantum phase transition in an Ising-type spin chain.

  4. Medicare program; clarification of Medicare's accrual basis of accounting policy--HCFA. Final rule.

    PubMed

    1995-06-27

    This final rule revises the Medicare regulations to clarify the concept of "accrual basis of accounting" to indicate that expenses must be incurred by a provider of health care services before Medicare will pay its share of those expenses. This rule does not signify a change in policy but, rather, incorporates into the regulations Medicare's longstanding policy regarding the circumstances under which we recognize, for the purposes of program payment, a provider's claim for costs for which it has not actually expended funds during the current cost reporting period.

  5. Florida's Model of Nursing Home Medicaid Reimbursement for Disaster-Related Expenses

    ERIC Educational Resources Information Center

    Thomas, Kali S.; Hyer, Kathryn; Brown, Lisa M.; Polivka-West, LuMarie; Branch, Laurence G.

    2010-01-01

    Purpose: This study describes Florida's model of Medicaid nursing home (NH) reimbursement to compensate NHs for disaster-related expenses incurred as a result of 8 hurricanes within a 2-year period. This Florida model can serve as a demonstration for a national model for disaster-related reimbursement. Design and Methods: Florida reimburses NHs…

  6. Advances in spectroscopic methods for quantifying soil carbon

    USGS Publications Warehouse

    Reeves, James B.; McCarty, Gregory W.; Calderon, Francisco; Hively, W. Dean

    2012-01-01

    The current gold standard for soil carbon (C) determination is elemental C analysis using dry combustion. However, this method requires expensive consumables, is limited by the number of samples that can be processed (~100/d), and is restricted to the determination of total carbon. With increased interest in soil C sequestration, faster methods of analysis are needed, and there is growing interest in methods based on diffuse reflectance spectroscopy in the visible, near-infrared or mid-infrared spectral ranges. These spectral methods can decrease analytical requirements and speed sample processing, be applied to large landscape areas using remote sensing imagery, and be used to predict multiple analytes simultaneously. However, the methods require localized calibrations to establish the relationship between spectral data and reference analytical data, and also have additional, specific problems. For example, remote sensing is capable of scanning entire watersheds for soil carbon content but is limited to the surface layer of tilled soils and may require difficult and extensive field sampling to obtain proper localized calibration reference values. The objective of this chapter is to discuss the present state of spectroscopic methods for determination of soil carbon.

  7. Cryopreservation of Viable Human Lung Tissue for Versatile Post-thaw Analyses and Culture

    PubMed Central

    Baatz, John E.; Newton, Danforth A.; Riemer, Ellen C.; Denlinger, Chadrick E.; Jones, E. Ellen; Drake, Richard R.; Spyropoulos, Demetri D.

    2018-01-01

    Clinical trials are currently used to test therapeutic efficacies for lung cancer, infections and diseases. Animal models are also used as surrogates for human disease. Both approaches are expensive and time-consuming. The utility of human biospecimens as models is limited by specialized tissue processing methods that preserve subclasses of analytes (e.g. RNA, protein, morphology) at the expense of others. We present a rapid and reproducible method for the cryopreservation of viable lung tissue from patients undergoing lobectomy or transplant. This method involves the pseudo-diaphragmatic expansion of pieces of fresh lung tissue with cryoprotectant formulation (pseudo-diaphragmatic expansion-cryoprotectant perfusion or PDX-CP) followed by controlled-rate freezing in cryovials. Expansion-perfusion rates, volumes and cryoprotectant formulation were optimized to maintain tissue architecture, decrease crystal formation and increase long-term cell viability. Rates of expansion of 4 cc/min or less and volumes ranging from 0.8–1.2 × tissue volume were well-tolerated by lung tissue obtained from patients with chronic obstructive pulmonary disease or idiopathic pulmonary fibrosis, showing minimal differences compared to standard histopathology. Morphology was greatly improved by the PDX-CP procedure compared to simple fixation. Fresh versus post-thawed lung tissue showed minimal differences in histology, RNA integrity numbers and post-translational modified protein integrity (2-dimensional differential gel electrophoresis). It was possible to derive numerous cell types, including alveolar epithelial cells, fibroblasts and stem cells, from the tissue for at least three months after cryopreservation. This new method should provide a uniform, cost-effective approach to the banking of biospecimens, with versatility to be amenable to any post-acquisition process applicable to fresh tissue samples. PMID:24982205

  8. Current methods of laboratory diagnosis of Chlamydia trachomatis infections.

    PubMed Central

    Black, C M

    1997-01-01

    Infections caused by Chlamydia trachomatis are probably the most common sexually transmitted diseases in the United States. Commonly unrecognized and often inadequately treated, chlamydial infections can ascend the reproductive tract and cause pelvic inflammatory disease, which often results in the devastating consequences of infertility, ectopic pregnancy, or chronic pelvic pain. C. trachomatis infections are also known to increase the risk for human immunodeficiency virus infection. The obligate intracellular life cycle of C. trachomatis has traditionally required laboratory diagnostic tests that are technically demanding, labor-intensive, expensive, and difficult to access. In spite of these historical challenges, however, laboratory diagnosis of C. trachomatis has been a rapidly advancing area in which there is presently a wide array of commercial diagnostic technologies, costs, manufacturers. This review describes and compares the diagnostic methods for C. trachomatis infection that are currently approved for use in the United States, including the newest DNA amplification technologies which are yet to be licensed for commercial use. Issues to consider in selecting a test for purposes of screening versus diagnosis based on prevalence, performance, legal, social, and cost issues are also discussed. PMID:8993862

  9. Wearable Technology for Chronic Wound Monitoring: Current Dressings, Advancements, and Future Prospects.

    PubMed

    Brown, Matthew S; Ashley, Brandon; Koh, Ahyeon

    2018-01-01

    Chronic non-healing wounds challenge tissue regeneration and impair infection regulation for patients afflicted with this condition. Next generation wound care technology capable of in situ physiological surveillance which can diagnose wound parameters, treat various chronic wound symptoms, and reduce infection at the wound noninvasively with the use of a closed loop therapeutic system would provide patients with an improved standard of care and an accelerated wound repair mechanism. The indicating biomarkers specific to chronic wounds include blood pressure, temperature, oxygen, pH, lactate, glucose, interleukin-6 (IL-6), and infection status. A wound monitoring device would help decrease prolonged hospitalization, multiple doctors' visits, and the expensive lab testing associated with the diagnosis and treatment of chronic wounds. A device capable of monitoring the wound status and stimulating the healing process is highly desirable. In this review, we discuss the impaired physiological states of chronic wounds and explain the current treatment methods. Specifically, we focus on improvements in materials, platforms, fabrication methods for wearable devices, and quantitative analysis of various biomarkers vital to wound healing progress.

  10. Time-Shifted Boundary Conditions Used for Navier-Stokes Aeroelastic Solver

    NASA Technical Reports Server (NTRS)

    Srivastava, Rakesh

    1999-01-01

    Under the Advanced Subsonic Technology (AST) Program, an aeroelastic analysis code (TURBO-AE) based on Navier-Stokes equations is currently under development at NASA Lewis Research Center s Machine Dynamics Branch. For a blade row, aeroelastic instability can occur in any of the possible interblade phase angles (IBPA s). Analyzing small IBPA s is very computationally expensive because a large number of blade passages must be simulated. To reduce the computational cost of these analyses, we used time shifted, or phase-lagged, boundary conditions in the TURBO-AE code. These conditions can be used to reduce the computational domain to a single blade passage by requiring the boundary conditions across the passage to be lagged depending on the IBPA being analyzed. The time-shifted boundary conditions currently implemented are based on the direct-store method. This method requires large amounts of data to be stored over a period of the oscillation cycle. On CRAY computers this is not a major problem because solid-state devices can be used for fast input and output to read and write the data onto a disk instead of storing it in core memory.

  11. Wearable Technology for Chronic Wound Monitoring: Current Dressings, Advancements, and Future Prospects

    PubMed Central

    Brown, Matthew S.; Ashley, Brandon; Koh, Ahyeon

    2018-01-01

    Chronic non-healing wounds challenge tissue regeneration and impair infection regulation for patients afflicted with this condition. Next generation wound care technology capable of in situ physiological surveillance which can diagnose wound parameters, treat various chronic wound symptoms, and reduce infection at the wound noninvasively with the use of a closed loop therapeutic system would provide patients with an improved standard of care and an accelerated wound repair mechanism. The indicating biomarkers specific to chronic wounds include blood pressure, temperature, oxygen, pH, lactate, glucose, interleukin-6 (IL-6), and infection status. A wound monitoring device would help decrease prolonged hospitalization, multiple doctors' visits, and the expensive lab testing associated with the diagnosis and treatment of chronic wounds. A device capable of monitoring the wound status and stimulating the healing process is highly desirable. In this review, we discuss the impaired physiological states of chronic wounds and explain the current treatment methods. Specifically, we focus on improvements in materials, platforms, fabrication methods for wearable devices, and quantitative analysis of various biomarkers vital to wound healing progress. PMID:29755977

  12. Development of a Rapid Insulin Assay by Homogenous Time-Resolved Fluorescence

    PubMed Central

    Vallaghe, Julie; Gregor, Nathalie; Donthamsetti, Prashant; Harris, Paul E.; Pierre, Nicolas; Freyberg, Robin; Charrier-Savournin, Fabienne; Javitch, Jonathan A.; Freyberg, Zachary

    2016-01-01

    Direct measurement of insulin is critical for basic and clinical studies of insulin secretion. However, current methods are expensive and time-consuming. We developed an insulin assay based on homogenous time-resolved fluorescence that is significantly more rapid and cost-effective than current commonly used approaches. This assay was applied effectively to an insulin secreting cell line, INS-1E cells, as well as pancreatic islets, allowing us to validate the assay by elucidating mechanisms by which dopamine regulates insulin release. We found that dopamine functioned as a significant negative modulator of glucose-stimulated insulin secretion. Further, we showed that bromocriptine, a known dopamine D2/D3 receptor agonist and newly approved drug used for treatment of type II diabetes mellitus, also decreased glucose-stimulated insulin secretion in islets to levels comparable to those caused by dopamine treatment. PMID:26849707

  13. Gas turbine coatings eddy current quantitative and qualitative evaluation

    NASA Astrophysics Data System (ADS)

    Ribichini, Remo; Giolli, Carlo; Scrinzi, Erica

    2017-02-01

    Gas turbine blades (buckets) are among the most critical and expensive components of the engine. Buckets rely on protective coatings in order to withstand the harsh environment in which they operate. The thickness and the microstructure of coatings during the lifespan of a unit are fundamental to evaluate their fitness for service. A frequency scanning Eddy Current instrument can allow the measurement of the thickness and of physical properties of coatings in a Non-Destructive manner. The method employed relies on the acquisition of impedance spectra and on the inversion of the experimental data to derive the coating properties and structure using some assumptions. This article describes the experimental validation performed on several samples and real components in order to assess the performance of the instrument as a coating thickness gage. The application of the technique to support residual life assessment of serviced buckets is also presented.

  14. Lenticular card: a new method for denture identification.

    PubMed

    Colvenkar, Shreya S

    2010-01-01

    The need for denture marking is important for forensic and social reasons in case patients need to be identified individually. Majority of the surface marking and inclusion techniques are expensive, time consuming, and do not permit the incorporation of large amounts of information. In this article, the method to include a lenticular identification card stood out from the currently available denture marking methods in various ways. The lenticular card stores the patient's information has two or more images that can be viewed by changing the angle of view. The maxillary denture was processed according to the manufacturer's instructions. The lenticular identification card was incorporated in the external posterior buccal surface of the maxillary denture using salt and pepper technique. For testing of durability, denture with the identifier was placed in water for up to 4 months. The proposed method is simple, cheap, and can store a large amount of information, thus allowing quick identification of the denture wearer. The labels showed no sign of fading or deterioration.

  15. A rapid low-cost high-density DNA-based multi-detection test for routine inspection of meat species.

    PubMed

    Lin, Chun Chi; Fung, Lai Ling; Chan, Po Kwok; Lee, Cheuk Man; Chow, Kwok Fai; Cheng, Shuk Han

    2014-02-01

    The increasing occurrence of food frauds suggests that species identification should be part of food authentication. Current molecular-based species identification methods have their own limitations or drawbacks, such as relatively time-consuming experimental steps, expensive equipment and, in particular, these methods cannot identify mixed species in a single experiment. This project proposes an improved method involving PCR amplification of the COI gene and detection of species-specific sequences by hybridisation. Major innovative breakthrough lies in the detection of multiple species, including pork, beef, lamb, horse, cat, dog and mouse, from a mixed sample within a single experiment. The probes used are species-specific either in sole or mixed species samples. As little as 5 pg of DNA template in the PCR is detectable in the proposed method. By designing species-specific probes and adopting reverse dot blot hybridisation and flow-through hybridisation, a low-cost high-density DNA-based multi-detection test suitable for routine inspection of meat species was developed. © 2013.

  16. Enhancing steel properties through in situ formation of ultrahard ceramic surface

    PubMed Central

    Pahlevani, Farshid; Kumar, Rahul; Gorjizadeh, Narjes; Hossain, Rumana; Cholake, Sagar T; Privat, Karen; Sahajwalla, Veena

    2016-01-01

    Abrasion and corrosion resistant steel has attracted considerable interest for industrial application as a means of minimising the costs associated with product/component failures and/or short replacement cycles. These classes of steels contain alloying elements that increase their resistance to abrasion and corrosion. Their benefits, however, currently come at a potentially prohibitive cost; such high performance steel products are both more technically challenging and more expensive to produce. Although these methods have proven effective in improving the performance of more expensive, high-grade steel components, they are not economically viable for relatively low cost steel products. New options are needed. In this study, a complex industrial waste stream has been transformed in situ via precisely controlled high temperature reactions to produce an ultrahard ceramic surface on steel. This innovative ultrahard ceramic surface increases both the hardness and compressive strength of the steel. Furthermore, by modifying the composition of the waste input and the processing parameters, the ceramic surface can be effectively customised to match the intended application of the steel. This economical new approach marries industry demands for more cost-effective, durable steel products with global imperatives to address resource depletion and environmental degradation through the recovery of resources from waste. PMID:27929096

  17. Techno-economic evaluation of biodiesel production from waste cooking oil--a case study of Hong Kong.

    PubMed

    Karmee, Sanjib Kumar; Patria, Raffel Dharma; Lin, Carol Sze Ki

    2015-02-18

    Fossil fuel shortage is a major challenge worldwide. Therefore, research is currently underway to investigate potential renewable energy sources. Biodiesel is one of the major renewable energy sources that can be obtained from oils and fats by transesterification. However, biodiesel obtained from vegetable oils as feedstock is expensive. Thus, an alternative and inexpensive feedstock such as waste cooking oil (WCO) can be used as feedstock for biodiesel production. In this project, techno-economic analyses were performed on the biodiesel production in Hong Kong using WCO as a feedstock. Three different catalysts such as acid, base, and lipase were evaluated for the biodiesel production from WCO. These economic analyses were then compared to determine the most cost-effective method for the biodiesel production. The internal rate of return (IRR) sensitivity analyses on the WCO price and biodiesel price variation are performed. Acid was found to be the most cost-effective catalyst for the biodiesel production; whereas, lipase was the most expensive catalyst for biodiesel production. In the IRR sensitivity analyses, the acid catalyst can also acquire acceptable IRR despite the variation of the WCO and biodiesel prices.

  18. Techno-Economic Evaluation of Biodiesel Production from Waste Cooking Oil—A Case Study of Hong Kong

    PubMed Central

    Karmee, Sanjib Kumar; Patria, Raffel Dharma; Lin, Carol Sze Ki

    2015-01-01

    Fossil fuel shortage is a major challenge worldwide. Therefore, research is currently underway to investigate potential renewable energy sources. Biodiesel is one of the major renewable energy sources that can be obtained from oils and fats by transesterification. However, biodiesel obtained from vegetable oils as feedstock is expensive. Thus, an alternative and inexpensive feedstock such as waste cooking oil (WCO) can be used as feedstock for biodiesel production. In this project, techno-economic analyses were performed on the biodiesel production in Hong Kong using WCO as a feedstock. Three different catalysts such as acid, base, and lipase were evaluated for the biodiesel production from WCO. These economic analyses were then compared to determine the most cost-effective method for the biodiesel production. The internal rate of return (IRR) sensitivity analyses on the WCO price and biodiesel price variation are performed. Acid was found to be the most cost-effective catalyst for the biodiesel production; whereas, lipase was the most expensive catalyst for biodiesel production. In the IRR sensitivity analyses, the acid catalyst can also acquire acceptable IRR despite the variation of the WCO and biodiesel prices. PMID:25809602

  19. Enhancing steel properties through in situ formation of ultrahard ceramic surface.

    PubMed

    Pahlevani, Farshid; Kumar, Rahul; Gorjizadeh, Narjes; Hossain, Rumana; Cholake, Sagar T; Privat, Karen; Sahajwalla, Veena

    2016-12-08

    Abrasion and corrosion resistant steel has attracted considerable interest for industrial application as a means of minimising the costs associated with product/component failures and/or short replacement cycles. These classes of steels contain alloying elements that increase their resistance to abrasion and corrosion. Their benefits, however, currently come at a potentially prohibitive cost; such high performance steel products are both more technically challenging and more expensive to produce. Although these methods have proven effective in improving the performance of more expensive, high-grade steel components, they are not economically viable for relatively low cost steel products. New options are needed. In this study, a complex industrial waste stream has been transformed in situ via precisely controlled high temperature reactions to produce an ultrahard ceramic surface on steel. This innovative ultrahard ceramic surface increases both the hardness and compressive strength of the steel. Furthermore, by modifying the composition of the waste input and the processing parameters, the ceramic surface can be effectively customised to match the intended application of the steel. This economical new approach marries industry demands for more cost-effective, durable steel products with global imperatives to address resource depletion and environmental degradation through the recovery of resources from waste.

  20. Roll-to-Roll production of carbon nanotubes based supercapacitors

    NASA Astrophysics Data System (ADS)

    Zhu, Jingyi; Childress, Anthony; Karakaya, Mehmet; Roberts, Mark; Arcilla-Velez, Margarita; Podila, Ramakrishna; Rao, Apparao

    2014-03-01

    Carbon nanomaterials provide an excellent platform for electrochemical double layer capacitors (EDLCs). However, current industrial methods for producing carbon nanotubes are expensive and thereby increase the costs of energy storage to more than 10 Wh/kg. In this regard, we developed a facile roll-to-roll production technology for scalable manufacturing of multi-walled carbon nanotubes (MWNTs) with variable density on run-of-the-mill kitchen Al foils. Our method produces MWNTs with diameter (heights) between 50-100 nm (10-100 μm), and a specific capacitance as high as ~ 100 F/g in non-aqueous electrolytes. In this talk, the fundamental challenges involved in EDLC-suitable MWNT growth, roll-to-roll production, and device manufacturing will be discussed along with electrochemical characteristics of roll-to-roll MWNTs. Research supported by NSF CMMI Grant1246800.

  1. Artificial Intelligence Support for Computational Chemistry

    NASA Astrophysics Data System (ADS)

    Duch, Wlodzislaw

    Possible forms of artificial intelligence (AI) support for quantum chemistry are discussed. Questions addressed include: what kind of support is desirable, what kind of support is feasible, what can we expect in the coming years. Advantages and disadvantages of current AI techniques are presented and it is argued that at present the memory-based systems are the most effective for large scale applications. Such systems may be used to predict the accuracy of calculations and to select the least expensive methods and basis sets belonging to the same accuracy class. Advantages of the Feature Space Mapping as an improvement on the memory based systems are outlined and some results obtained in classification problems given. Relevance of such classification systems to computational chemistry is illustrated with two examples showing similarity of results obtained by different methods that take electron correlation into account.

  2. [Stress and fertility].

    PubMed

    Ősapay, György; Ősapay, Klára

    2015-08-30

    In Western countries, sperm quality and fertility of men significantly worsened. Female infertility does not show a better trend either. Subtle defects in the reproductive functions can not be explained by the current methods, and "unexplained infertility" is becoming a more common diagnosis. Every year 1 million couples seek expensive and time consuming fertility treatment in the world. Deeper understanding of an unhealthy lifestyle and the environmental damages may lead to personalized treatments to increase the chance of conception.The effects of various stressors on the male and female reproductive performance were scientifically substantiated by Selye and coworkers in 1976. Cognitive therapy methods can be applied against emotional stressors, supplementation by antioxidants against reactive oxygen compounds, and administration of vitamins and trace elements, especially when deficiency is found, may help before medical intervention on a rational and economical way in the fight against infertility.

  3. Useful adjuncts for vitreoretinal surgery.

    PubMed Central

    Gross, J. G.; Freeman, W. R.; Goldbaum, M. H.; Mendez, T. L.

    1989-01-01

    Many vitreoretinal procedures are performed in offices and hospitals where cost control is important. We describe three useful devices and techniques that facilitate these procedures at minimal expense and often greater convenience. These include an accurate method for localising the pars plana without the use of callipers, an inexpensive, reliable, pressure regulated air pump for fluid-air exchange, and an easy method for intraocular injection of silicone oil through 20 gauge instrumentation without the need for expensive pumps. These procedures and techniques should prove to be useful in the treatment of vitreoretinal disease. Images PMID:2751976

  4. Development of a brazing process for the production of water- cooled bipolar plates made of chromium-coated metal foils for PEM fuel cells

    NASA Astrophysics Data System (ADS)

    Mueller, M.; Hoehlich, D.; Scharf, I.; Lampke, T.; Hollaender, U.; Maier, H. J.

    2016-03-01

    Beside lithium batteries, PEM fuel cells are the most promising strategy as a power source to achieve the targets for introducing and increasing the usage of electric vehicles. Due to limited space and weight problems, water cooled, metallic bipolar plates in a fuel cell metal stack are preferred in motor vehicles. These plates are stamped metal sheets with a complex structure, interconnected media-tight. To meet the multiple tasks and requirements in use, complex and expensive combinations of materials are currently in use (carbon fiber composites, graphite, gold-plated nickel, stainless and acid resistant steel). The production of such plates is expensive as it is connected with considerable effort or the usage of precious metals. As an alternative, metalloid nitrides (CrN, VN, W2N, etc.) show a high chemical resistance, hardness and a good conductivity. So this material category meets the basic requirements of a top layer. However, the standard methods for their production (PVD, CVD) are expensive and have a slow deposition rate and a lower layer thicknesses. Because of these limitations, a full functionality over the life cycle of a bipolar plate is not guaranteed. The contribution shows the development and quantification of an alternative production process for bipolar plates. The expectation is to get significant advantages from the combination of chromium electrodeposition and thermochemical treatment to form chromium nitrides. Both processes are well researched and suitable for series production. The thermochemical treatment of the chromium layer also enables a process-integrated brazing.

  5. Editorially Speaking - Fusion Power: Reasons for Higher Priority

    ERIC Educational Resources Information Center

    Lippincott, William T.

    1973-01-01

    Discusses current research trends in the use of laser-fusion technology in combustion chambers to eradicate energy shortages. Indicates that fusion power could be made available at a relatively low expense. (CC)

  6. A proof of principle spheromak experiment: The next step on a recently opened path to economical fusion power

    NASA Astrophysics Data System (ADS)

    Jarboe, Thomas; Marklin, George; Nelson, Brian; Sutherland, Derek; HIT Team Team

    2013-10-01

    A proof of principle experiment to study closed-flux energy confinement of a spheromak sustained by imposed dynamo current drive is described. A two-fluid validated NIMROD code has simulated closed-flux sustainment on a stable spheromak using imposed dynamo current drive (IDCD), demonstrating that dynamo current drive is compatible with closed flux. (submitted for publication and see adjacent poster.(spsap)) HIT-SI, a = 0.25 m, has achieved 90 kA of toroidal current, current gains of nearly 4, and operation from 5.5 kHz to 68 kHz, demonstrating the robustness of the method.(spsap) Finally, a reactor design study using fusion technology developed for ITER and modern nuclear technology shows a design that is economically superior to coal.(spsap) The spheromak reactor and development path are about a factor of 10 less expensive than that of the tokamak/stellarator. These exciting results justify a proof of principle (PoP) confinement experiment of a spheromak sustained by IDCD. Such an experiment (R = 1.5 m, a = 1 m, Itor = 3 . 2 MA, n = 4e19/m3, T = 3 keV) is described in detail.

  7. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Krityakierne, Tipaluck; Akhtar, Taimoor; Shoemaker, Christine A.

    This paper presents a parallel surrogate-based global optimization method for computationally expensive objective functions that is more effective for larger numbers of processors. To reach this goal, we integrated concepts from multi-objective optimization and tabu search into, single objective, surrogate optimization. Our proposed derivative-free algorithm, called SOP, uses non-dominated sorting of points for which the expensive function has been previously evaluated. The two objectives are the expensive function value of the point and the minimum distance of the point to previously evaluated points. Based on the results of non-dominated sorting, P points from the sorted fronts are selected as centersmore » from which many candidate points are generated by random perturbations. Based on surrogate approximation, the best candidate point is subsequently selected for expensive evaluation for each of the P centers, with simultaneous computation on P processors. Centers that previously did not generate good solutions are tabu with a given tenure. We show almost sure convergence of this algorithm under some conditions. The performance of SOP is compared with two RBF based methods. The test results show that SOP is an efficient method that can reduce time required to find a good near optimal solution. In a number of cases the efficiency of SOP is so good that SOP with 8 processors found an accurate answer in less wall-clock time than the other algorithms did with 32 processors.« less

  8. The financial burden of out-of-pocket expenses in the United States and Canada: How different is the United States?

    PubMed Central

    Baird, Katherine E

    2016-01-01

    Background: This article compares the burden that medical cost-sharing requirements place on households in the United States and Canada. It estimates the probability that individuals with similar demographic features in the two countries have large medical expenses relative to income. Method: The study uses 2010 nationally representative household survey data harmonized for cross-national comparisons to identify individuals with high medical expenses relative to income. Using logistic regression, it estimates the probability of high expenses occurring among 10 different demographic groups in the two countries. Results: The results show the risk of large medical expenses in the United States is 1.5–4 times higher than it is in Canada, depending on the demographic group and spending threshold used. The United States compares least favorably when evaluating poorer citizens and when using a higher spending threshold. Conclusion: Recent health care reforms can be expected to reduce Americans’ catastrophic health expenses, but it will take very large reductions in out-of-pocket expenditures—larger than can be expected—if poorer and middle-class families are to have the financial protection from high health care costs that their counterparts in Canada have. PMID:26985389

  9. WebCT: A Major Shift of Emphasis

    ERIC Educational Resources Information Center

    Morningstar, Barbara; Schubert, Jeremy; Thibeault, Kristine

    2004-01-01

    The evaluation reports in this series usually feature several products at once. The current review, however, comes at a time when one of the most widely used (and expensive) online learning management systems is undergoing a major change in its marketing strategy and corporate focus. "WebCT" is currently evolving to a new version ("WebCT Vista"),…

  10. Exploring Faraday's Law of Electrolysis Using Zinc-Air Batteries with Current Regulative Diodes

    ERIC Educational Resources Information Center

    Kamata, Masahiro; Paku, Miei

    2007-01-01

    Current regulative diodes (CRDs) are applied to develop new educational experiments on Faraday's law by using a zinc-air battery (PR2330) and a resistor to discharge it. The results concluded that the combination of zinc-air batteries and the CRD array is simpler, less expensive, and quantitative and gives accurate data.

  11. Designing Systems for Many Possible Futures. An RSC-based Method for Affordable Concept Selection (RMACS) with Multi-Era Analysis

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Schaffner, Michael

    2014-06-01

    The current downward trend in funding for U.S. defense systems seems to be on a collision course with the state of the practice in systems engineering, which typically results in the increased pace and scale of capabilities and resultantly increased cost of complex national defense systems. Recent advances in the state of the art in systems engineering methodology can be leveraged to address this growing challenge. The present work leverages advanced constructs and methods for early-phase conceptual design of complex systems, when committed costs are still low and management influence is still high. First, a literature review is presented ofmore » the topics relevant to this work, including approaches to the design of affordable systems, assumptions and methods of exploratory modeling, and enabling techniques to help mitigate the computational challenges involved. The types, purposes, and limits of early-phase, exploratory models are then elucidated. The RSC-based Method for Affordable Concept Selection (RMACS) is described, which comprises nine processes in the three main thrusts of information gathering, evaluation, and analysis. The method is then applied to a naval ship case example, described as the Next-Generation Combat Ship, with representational information outputs and discussions of affordability with respect to each process. The ninth process, Multi-Era Analysis (MERA), is introduced and explicated, including required and optional informational components, temporal and change-related considerations, required and optional activities involved, and the potential types of outputs from the process. The MERA process is then applied to a naval ship case example similar to that of the RMACS application, but with discrete change options added to enable a tradespace network. The seven activities of the MERA process are demonstrated, with the salient outputs of each given and discussed. Additional thoughts are presented on MERA and RMACS, and 8 distinct areas are identified for further research in the MERA process, along with a brief description of the directions that such research might take. It is concluded that the affordability of complex systems can be better enabled through a conceptual design method that incorporates MERA as well as metrics such as Multi-Attribute Expense, Max Expense, and Expense Stability. It is also found that affordability of changeable systems can be better enabled through the use of existing path-planning algorithms in efficient evaluation and analysis of long-term strategies. Finally, it is found that MERA enables the identification and analysis of path-dependent considerations related to designs, epochs, strategies, and change options, in many possible futures.« less

  12. Magnetic Shield for Adiabatic Demagnetization Refrigerators (ADR)

    NASA Technical Reports Server (NTRS)

    Chui, Talso C.; Haddad, Nicolas E.

    2013-01-01

    A new method was developed for creating a less expensive shield for ADRs using 1018 carbon steel. This shield has been designed to have similar performance to the expensive vanadium permendur shields, but the cost is 30 to 50% less. Also, these shields can be stocked in a variety of sizes, eliminating the need for special forgings, which also greatly reduces cost.

  13. 41 CFR 302-7.200 - How are charges paid and who makes the arrangements for transporting HHG, PBP&E and temporary...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... STORAGE OF HOUSEHOLD GOODS AND PROFESSIONAL BOOKS, PAPERS, AND EQUIPMENT (PBP&E) Actual Expense Method § 302-7.200 How are charges paid and who makes the arrangements for transporting HHG, PBP&E and... who makes the arrangements for transporting HHG, PBP&E and temporary storage under the actual expense...

  14. 41 CFR 301-70.705 - What methods of payment for official travel expenses may we authorize when an exemption from use...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... travel charge card is granted? When you grant an exemption from use of the Government contractor-issued... for official travel expenses may we authorize when an exemption from use of the Government contractor-issued travel charge card is granted? 301-70.705 Section 301-70.705 Public Contracts and Property...

  15. Tax and Record Keeping Information for Family Child Care = Informacion Sobre los Impuestos y la Documentacion para el Cuidado Infantil en el Hogar.

    ERIC Educational Resources Information Center

    Gellert, Sandra

    This pamphlet from the Children's Foundation, in both English- and Spanish-language versions, provides advice to child care providers on record-keeping methods. The pamphlet also gives definitions and guidance on business expenses (100% deductible, shared personal and business, and depreciated capital expenses), time-space formula, self-employment…

  16. Impact of douglas-fir tussock moth... color aerial phtography evaluates mortality

    Treesearch

    Steven L. Wert; Boyd E. Wickman

    1970-01-01

    Thorough evaluation of insect impact on forest stands is difficult and expensive on the ground. In a study of tree damage following Douglas-fir tussock moth defoliation in Modoc County, California, large-scale (1:1,584)70-mm. color aerial photography was an effective sampling tool and took lesstime and expense than ground methods. Comparison of the photo...

  17. Fast Three-Dimensional Method of Modeling Atomic Oxygen Undercutting of Protected Polymers

    NASA Technical Reports Server (NTRS)

    Snyder, Aaron; Banks, Bruce A.

    2002-01-01

    A method is presented to model atomic oxygen erosion of protected polymers in low Earth orbit (LEO). Undercutting of protected polymers by atomic oxygen occurs in LEO due to the presence of scratch, crack or pin-window defects in the protective coatings. As a means of providing a better understanding of undercutting processes, a fast method of modeling atomic-oxygen undercutting of protected polymers has been developed. Current simulation methods often rely on computationally expensive ray-tracing procedures to track the surface-to-surface movement of individual "atoms." The method introduced in this paper replaces slow individual particle approaches by substituting a model that utilizes both a geometric configuration-factor technique, which governs the diffuse transport of atoms between surfaces, and an efficient telescoping series algorithm, which rapidly integrates the cumulative effects stemming from the numerous atomic oxygen events occurring at the surfaces of an undercut cavity. This new method facilitates the systematic study of three-dimensional undercutting by allowing rapid simulations to be made over a wide range of erosion parameters.

  18. Positron collisions with acetylene calculated using the R-matrix with pseudo-states method

    NASA Astrophysics Data System (ADS)

    Zhang, Rui; Galiatsatos, Pavlos G.; Tennyson, Jonathan

    2011-10-01

    Eigenphase sums, total cross sections and differential cross sections are calculated for low-energy collisions of positrons with C2H2. The calculations demonstrate that the use of appropriate pseudo-state expansions very significantly improves the representation of this process giving both realistic eigenphases and cross sections. Differential cross sections are strongly forward peaked in agreement with the measurements. These calculations are computationally very demanding; even with improved procedures for matrix diagonalization, fully converged calculations are too expensive with current computer resources. Nonetheless, the calculations show clear evidence for the formation of a virtual state but no indication that acetylene actually binds a positron at its equilibrium geometry.

  19. Rationale and evidence for menu-labeling legislation.

    PubMed

    Roberto, Christina A; Schwartz, Marlene B; Brownell, Kelly D

    2009-12-01

    Menu-labeling legislation is a proposed public health intervention for poor diet and obesity that requires chain restaurants to provide nutrition information on menus and menu boards. The restaurant industry has strongly opposed menu-labeling legislation. Using scientific evidence, this paper counters industry arguments against menu labeling by demonstrating that consumers want chain restaurant nutrition information to be disclosed; the current methods of providing nutrition information are inadequate; the expense of providing nutrition information is minimal; the government has the legal right to mandate disclosure of information; consumers have the right to know nutrition information; a lack of information reduces the efficiency of a market economy; and menu labeling has the potential to make a positive public health impact.

  20. Graphene devices based on laser scribing technology

    NASA Astrophysics Data System (ADS)

    Qiao, Yan-Cong; Wei, Yu-Hong; Pang, Yu; Li, Yu-Xing; Wang, Dan-Yang; Li, Yu-Tao; Deng, Ning-Qin; Wang, Xue-Feng; Zhang, Hai-Nan; Wang, Qian; Yang, Zhen; Tao, Lu-Qi; Tian, He; Yang, Yi; Ren, Tian-Ling

    2018-04-01

    Graphene with excellent electronic, thermal, optical, and mechanical properties has great potential applications. The current devices based on graphene grown by micromechanical exfoliation, chemical vapor deposition (CVD), and thermal decomposition of silicon carbide are still expensive and inefficient. Laser scribing technology, a low-cost and time-efficient method of fabricating graphene, is introduced in this review. The patterning of graphene can be directly performed on solid and flexible substrates. Therefore, many novel devices such as strain sensors, acoustic devices, memory devices based on laser scribing graphene are fabricated. The outlook and challenges of laser scribing technology have also been discussed. Laser scribing may be a potential way of fabricating wearable and integrated graphene systems in the future.

  1. Mass spectrometry and immunoassay: how to measure steroid hormones today and tomorrow.

    PubMed

    Taylor, Angela E; Keevil, Brian; Huhtaniemi, Ilpo T

    2015-08-01

    The recent onslaught of mass spectrometry (MS) to measurements of steroid hormones, including demands that they should be the only acceptable method, has confused clinicians and scientists who have relied for more than 40 years on a variety of immunoassay (IA) methods in steroid hormone measurements. There is little doubt that MS methods with their superior specificity will be the future method of choice in many clinical and research applications of steroid hormone measurement. However, the majority of steroid measurements are currently, and will continue to be, carried out using various types of IAs for several reasons, including their technical ease, cost and availability of commercial reagents. Speedy replacement of all IAs with MS is an unrealistic and unnecessary goal, because the availability of MS measurements is limited by cost, need of expensive equipment, technical demands and lack of commercial applications. Furthermore, IAs have multiple well-known advantages that vindicate their continuing use. The purpose of this article is to elucidate the advantages and limitations of the MS and IA techniques from two angles, i.e. promotion of MS and defence of IA. The purpose of the text is to give the reader an unbiased view about the current state and future trends of steroid analysis and to help him/her choose the correct assay method to serve his/her diagnostic and research needs. © 2015 European Society of Endocrinology.

  2. Hydrology with unmanned aerial vehicles (UAVs)

    USDA-ARS?s Scientific Manuscript database

    Hydrologic remote sensing currently depends on expensive and infrequent aircraft observations for validation of operational satellite products, typically conducted during field campaigns that also include ground-based measurements. With the advent of new, hydrologically-relevant satellite missions, ...

  3. Assessing the methods needed for improved dengue mapping: a SWOT analysis

    PubMed Central

    Attaway, David Frost; Jacobsen, Kathryn H; Falconer, Allan; Manca, Germana; Waters, Nigel M

    2014-01-01

    Introduction Dengue fever, a mosquito-borne viral infection, is a growing threat to human health in tropical and subtropical areas worldwide. There is a demand from public officials for maps that capture the current distribution of dengue and maps that analyze risk factors to predict the future burden of disease. Methods To identify relevant articles, we searched Google Scholar, PubMed, BioMed Central, and WHOLIS (World Health Organization Library Database) for published articles with a specific set of dengue criteria between January 2002 and July 2013. Results After evaluating the currently available dengue models, we identified four key barriers to the creation of high-quality dengue maps: (1) data limitations related to the expense of diagnosing and reporting dengue cases in places where health information systems are underdeveloped; (2) issues related to the use of socioeconomic proxies in places with limited dengue incidence data; (3) mosquito ranges which may be changing as a result of climate changes; and (4) the challenges of mapping dengue events at a variety of scales. Conclusion An ideal dengue map will present endemic and epidemic dengue information from both rural and urban areas. Overcoming the current barriers requires expanded collaboration and data sharing by geographers, epidemiologists, and entomologists. Enhanced mapping techniques would allow for improved visualizations of dengue rates and risks. PMID:25328585

  4. Mental Depreciation and Marginal Decision Making

    PubMed

    Heath; Fennema

    1996-11-01

    We propose that individuals practice "mental depreciation," that is, they implicitly spread the fixed costs of their expenses over time or use. Two studies explore how people spread fixed costs on durable goods. A third study shows that depreciation can lead to two distinct errors in marginal decisions: First, people sometimes invest too much effort to get their money's worth from an expense (e.g., they may use a product a lot to spread the fixed expense across more uses). Second, people sometimes invest too little effort to get their money's worth: When people add a portion of the fixed cost to the current costs, their perceived marginal (i.e., incremental) costs exceed their true marginal costs. In response, they may stop investing because their perceived costs surpass the marginal benefits they are receiving. The latter effect is supported by two field studies that explore real board plan decisions by university students.

  5. Coded-aperture Compton camera for gamma-ray imaging

    NASA Astrophysics Data System (ADS)

    Farber, Aaron M.

    This dissertation describes the development of a novel gamma-ray imaging system concept and presents results from Monte Carlo simulations of the new design. Current designs for large field-of-view gamma cameras suitable for homeland security applications implement either a coded aperture or a Compton scattering geometry to image a gamma-ray source. Both of these systems require large, expensive position-sensitive detectors in order to work effectively. By combining characteristics of both of these systems, a new design can be implemented that does not require such expensive detectors and that can be scaled down to a portable size. This new system has significant promise in homeland security, astronomy, botany and other fields, while future iterations may prove useful in medical imaging, other biological sciences and other areas, such as non-destructive testing. A proof-of-principle study of the new gamma-ray imaging system has been performed by Monte Carlo simulation. Various reconstruction methods have been explored and compared. General-Purpose Graphics-Processor-Unit (GPGPU) computation has also been incorporated. The resulting code is a primary design tool for exploring variables such as detector spacing, material selection and thickness and pixel geometry. The advancement of the system from a simple 1-dimensional simulation to a full 3-dimensional model is described. Methods of image reconstruction are discussed and results of simulations consisting of both a 4 x 4 and a 16 x 16 object space mesh have been presented. A discussion of the limitations and potential areas of further study is also presented.

  6. Getting It Right: An Assessment of Several Methods for Calculating Regional School Costs across New York State.

    ERIC Educational Resources Information Center

    Widerquist, Karl

    Despite having its most expensive district spend 1.56 times more than its least expensive district, the state of New York has not used a cost index to determine the distribution of aid to school districts, except for Building Aid. The Consumer Price Index (as suggested by the Regents, Governor Pataki, State Comptroller McCall, and the Midstate…

  7. 77 FR 54578 - Maximum Per Diem Rates for the Continental United States (CONUS)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-09-05

    ... employees' expenses covered by per diem. All current non-standard area (NSA) lodging per diem rates will... range from $46-$71. GSA identified 10 new NSAs: Bakersfield/Ridgecrest, California (Kern County...

  8. THE CHALLENGE OF RESTORING WILD SALMON

    EPA Science Inventory

    Many experts have concluded that wild salmon recovery efforts in western North America (especially California, Oregon, Washington, Idaho, and southern British Columbia), as earnest, expensive, and socially disruptive as they currently are, do not appear likely to sustain biologic...

  9. ADVANCES IN PARTICLE SAMPLING AND MEASUREMENT

    EPA Science Inventory

    The paper, by five authorities who contributed significantly to the second symposium on advances to particle sampling and measurement (October 1979 in Daytona Beach, FL) summarizes salient developments in the field. Current techniques were described as being expensive, complicate...

  10. 7 CFR 1209.51 - Assessments.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE MUSHROOM PROMOTION, RESEARCH, AND CONSUMER INFORMATION ORDER Mushroom Promotion, Research, and Consumer Information Order Expenses and... current of commerce, mushrooms produced in the United States shall, in the manner as prescribed by the...

  11. 7 CFR 1209.51 - Assessments.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE MUSHROOM PROMOTION, RESEARCH, AND CONSUMER INFORMATION ORDER Mushroom Promotion, Research, and Consumer Information Order Expenses and... current of commerce, mushrooms produced in the United States shall, in the manner as prescribed by the...

  12. 7 CFR 1209.51 - Assessments.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE MUSHROOM PROMOTION, RESEARCH, AND CONSUMER INFORMATION ORDER Mushroom Promotion, Research, and Consumer Information Order Expenses and... current of commerce, mushrooms produced in the United States shall, in the manner as prescribed by the...

  13. 7 CFR 1209.51 - Assessments.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE MUSHROOM PROMOTION, RESEARCH, AND CONSUMER INFORMATION ORDER Mushroom Promotion, Research, and Consumer Information Order Expenses and... current of commerce, mushrooms produced in the United States shall, in the manner as prescribed by the...

  14. 7 CFR 1209.51 - Assessments.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE MUSHROOM PROMOTION, RESEARCH, AND CONSUMER INFORMATION ORDER Mushroom Promotion, Research, and Consumer Information Order Expenses and... current of commerce, mushrooms produced in the United States shall, in the manner as prescribed by the...

  15. Intercity passenger rail : prospects for Amtrak's financial viability

    DOT National Transportation Integrated Search

    1998-06-01

    Since it began operations in 1971, the National Railroad Passenger Corporation (AmtraK0 has never been profitable and has received about $21 billion in federal subsidies for operating and capital expenses. Amtrak currently provides intercity passenge...

  16. Convergence acceleration of molecular dynamics methods for shocked materials using velocity scaling

    NASA Astrophysics Data System (ADS)

    Taylor, DeCarlos E.

    2017-03-01

    In this work, a convergence acceleration method applicable to extended system molecular dynamics techniques for shock simulations of materials is presented. The method uses velocity scaling to reduce the instantaneous value of the Rankine-Hugoniot conservation of energy constraint used in extended system molecular dynamics methods to more rapidly drive the system towards a converged Hugoniot state. When used in conjunction with the constant stress Hugoniostat method, the velocity scaled trajectories show faster convergence to the final Hugoniot state with little difference observed in the converged Hugoniot energy, pressure, volume and temperature. A derivation of the scale factor is presented and the performance of the technique is demonstrated using the boron carbide armour ceramic as a test material. It is shown that simulation of boron carbide Hugoniot states, from 5 to 20 GPa, using both a classical Tersoff potential and an ab initio density functional, are more rapidly convergent when the velocity scaling algorithm is applied. The accelerated convergence afforded by the current algorithm enables more rapid determination of Hugoniot states thus reducing the computational demand of such studies when using expensive ab initio or classical potentials.

  17. Implicit integration methods for dislocation dynamics

    DOE PAGES

    Gardner, D. J.; Woodward, C. S.; Reynolds, D. R.; ...

    2015-01-20

    In dislocation dynamics simulations, strain hardening simulations require integrating stiff systems of ordinary differential equations in time with expensive force calculations, discontinuous topological events, and rapidly changing problem size. Current solvers in use often result in small time steps and long simulation times. Faster solvers may help dislocation dynamics simulations accumulate plastic strains at strain rates comparable to experimental observations. Here, this paper investigates the viability of high order implicit time integrators and robust nonlinear solvers to reduce simulation run times while maintaining the accuracy of the computed solution. In particular, implicit Runge-Kutta time integrators are explored as a waymore » of providing greater accuracy over a larger time step than is typically done with the standard second-order trapezoidal method. In addition, both accelerated fixed point and Newton's method are investigated to provide fast and effective solves for the nonlinear systems that must be resolved within each time step. Results show that integrators of third order are the most effective, while accelerated fixed point and Newton's method both improve solver performance over the standard fixed point method used for the solution of the nonlinear systems.« less

  18. Efficient sparse matrix-matrix multiplication for computing periodic responses by shooting method on Intel Xeon Phi

    NASA Astrophysics Data System (ADS)

    Stoykov, S.; Atanassov, E.; Margenov, S.

    2016-10-01

    Many of the scientific applications involve sparse or dense matrix operations, such as solving linear systems, matrix-matrix products, eigensolvers, etc. In what concerns structural nonlinear dynamics, the computations of periodic responses and the determination of stability of the solution are of primary interest. Shooting method iswidely used for obtaining periodic responses of nonlinear systems. The method involves simultaneously operations with sparse and dense matrices. One of the computationally expensive operations in the method is multiplication of sparse by dense matrices. In the current work, a new algorithm for sparse matrix by dense matrix products is presented. The algorithm takes into account the structure of the sparse matrix, which is obtained by space discretization of the nonlinear Mindlin's plate equation of motion by the finite element method. The algorithm is developed to use the vector engine of Intel Xeon Phi coprocessors. It is compared with the standard sparse matrix by dense matrix algorithm and the one developed by Intel MKL and it is shown that by considering the properties of the sparse matrix better algorithms can be developed.

  19. Screening and Rapid Molecular Diagnosis of Tuberculosis in Prisons in Russia and Eastern Europe: A Cost-Effectiveness Analysis

    PubMed Central

    Winetsky, Daniel E.; Negoescu, Diana M.; DeMarchis, Emilia H.; Almukhamedova, Olga; Dooronbekova, Aizhan; Pulatov, Dilshod; Vezhnina, Natalia; Owens, Douglas K.; Goldhaber-Fiebert, Jeremy D.

    2012-01-01

    Background Prisons of the former Soviet Union (FSU) have high rates of multidrug-resistant tuberculosis (MDR-TB) and are thought to drive general population tuberculosis (TB) epidemics. Effective prison case detection, though employing more expensive technologies, may reduce long-term treatment costs and slow MDR-TB transmission. Methods and Findings We developed a dynamic transmission model of TB and drug resistance matched to the epidemiology and costs in FSU prisons. We evaluated eight strategies for TB screening and diagnosis involving, alone or in combination, self-referral, symptom screening, mass miniature radiography (MMR), and sputum PCR with probes for rifampin resistance (Xpert MTB/RIF). Over a 10-y horizon, we projected costs, quality-adjusted life years (QALYs), and TB and MDR-TB prevalence. Using sputum PCR as an annual primary screening tool among the general prison population most effectively reduced overall TB prevalence (from 2.78% to 2.31%) and MDR-TB prevalence (from 0.74% to 0.63%), and cost US$543/QALY for additional QALYs gained compared to MMR screening with sputum PCR reserved for rapid detection of MDR-TB. Adding sputum PCR to the currently used strategy of annual MMR screening was cost-saving over 10 y compared to MMR screening alone, but produced only a modest reduction in MDR-TB prevalence (from 0.74% to 0.69%) and had minimal effect on overall TB prevalence (from 2.78% to 2.74%). Strategies based on symptom screening alone were less effective and more expensive than MMR-based strategies. Study limitations included scarce primary TB time-series data in FSU prisons and uncertainties regarding screening test characteristics. Conclusions In prisons of the FSU, annual screening of the general inmate population with sputum PCR most effectively reduces TB and MDR-TB prevalence, doing so cost-effectively. If this approach is not feasible, the current strategy of annual MMR is both more effective and less expensive than strategies using self-referral or symptom screening alone, and the addition of sputum PCR for rapid MDR-TB detection may be cost-saving over time. Please see later in the article for the Editors' Summary PMID:23209384

  20. Total Health-Related Costs Due to Absenteeism, Presenteeism, and Medical and Pharmaceutical Expenses in Japanese Employers

    PubMed Central

    Nagata, Tomohisa; Mori, Koji; Ohtani, Makoto; Nagata, Masako; Kajiki, Shigeyuki; Fujino, Yoshihisa; Matsuda, Shinya; Loeppke, Ronald

    2018-01-01

    Objective: This study aimed to examine a detailed breakdown of costs (absenteeism, presenteeism, and medical/pharmaceutical expenses), of the employees in four pharmaceutical companies in Japan. Methods: This is a cross-sectional study. Absenteeism and presenteeism were measured by a self-administered questionnaire for workers, and their costs were estimated using the human capital approach. Presenteeism was evaluated by the degree affected quality and quantity of work. Medical and pharmaceutical expenses were obtained by insurance claims. Results: The monetary value due to absenteeism was $520 per person per year (11%), that of presenteeism was $3055 (64%), and medical/pharmaceutical expenses were $1165 (25%). Two of the highest total cost burdens from chronic illness were related to mental (behavioral) health conditions and musculoskeletal disorders. Conclusion: A total cost approach can help employers set priorities for occupational health, safety, and population health management initiatives. PMID:29394196

  1. Towards an accurate representation of electrostatics in classical force fields: Efficient implementation of multipolar interactions in biomolecular simulations

    NASA Astrophysics Data System (ADS)

    Sagui, Celeste; Pedersen, Lee G.; Darden, Thomas A.

    2004-01-01

    The accurate simulation of biologically active macromolecules faces serious limitations that originate in the treatment of electrostatics in the empirical force fields. The current use of "partial charges" is a significant source of errors, since these vary widely with different conformations. By contrast, the molecular electrostatic potential (MEP) obtained through the use of a distributed multipole moment description, has been shown to converge to the quantum MEP outside the van der Waals surface, when higher order multipoles are used. However, in spite of the considerable improvement to the representation of the electronic cloud, higher order multipoles are not part of current classical biomolecular force fields due to the excessive computational cost. In this paper we present an efficient formalism for the treatment of higher order multipoles in Cartesian tensor formalism. The Ewald "direct sum" is evaluated through a McMurchie-Davidson formalism [L. McMurchie and E. Davidson, J. Comput. Phys. 26, 218 (1978)]. The "reciprocal sum" has been implemented in three different ways: using an Ewald scheme, a particle mesh Ewald (PME) method, and a multigrid-based approach. We find that even though the use of the McMurchie-Davidson formalism considerably reduces the cost of the calculation with respect to the standard matrix implementation of multipole interactions, the calculation in direct space remains expensive. When most of the calculation is moved to reciprocal space via the PME method, the cost of a calculation where all multipolar interactions (up to hexadecapole-hexadecapole) are included is only about 8.5 times more expensive than a regular AMBER 7 [D. A. Pearlman et al., Comput. Phys. Commun. 91, 1 (1995)] implementation with only charge-charge interactions. The multigrid implementation is slower but shows very promising results for parallelization. It provides a natural way to interface with continuous, Gaussian-based electrostatics in the future. It is hoped that this new formalism will facilitate the systematic implementation of higher order multipoles in classical biomolecular force fields.

  2. Advantages and disadvantages of college drinking in students' own words: content analysis of the decisional balance worksheet.

    PubMed

    Collins, Susan E; Kirouac, Megan; Taylor, Emily; Spelman, Philip J; Grazioli, Véronique; Hoffman, Gail; Haelsig, Laura; Holttum, Jessica; Kanagawa, Ami; Nehru, Mayanka; Hicks, Jennifer

    2014-09-01

    The decisional balance worksheet (DBW), an open-ended measure of motivation to change, may be used to record the perceived advantages and disadvantages of substance use as well as alternative behaviors. Recent findings have indicated that the open-ended DBW can be quantified to validly reflect college students' level of motivation to reduce their drinking (Collins, Carey, & Otto, 2009). The goal of the current study was to enhance our understanding of college students' perceived advantages and disadvantages of drinking by qualitatively examining the content of their decisional balance. Participants were undergraduate college students at a 4-year university (N = 760) who participated in a randomized controlled trial of online brief motivational interventions. Using the DBW, participants recorded the advantages and disadvantages of their current drinking. Conventional content analysis methods were used to extract common themes. Social, enjoyment, and psychological reasons were the most commonly mentioned advantages of drinking, whereas physical side effects, expense and interference with goals were the most commonly mentioned disadvantages of drinking. These findings show that college students primarily use alcohol for enjoyment, particularly in social situations, as well as for coping with stress and social anxiety. On the other hand, many college students report having physical side effects from drinking as well as other kinds of concerns (e.g., expense, calories). Findings suggest that using the open-ended DBW may result in a more client-centered and accurate representation of what college students perceive as advantages and disadvantages to drinking than established, Likert-scale measures of decisional balance.

  3. Global strategies to reduce the price of antiretroviral medicines: evidence from transactional databases

    PubMed Central

    Kaplan, Warren; King, Alexis C; Lawrence, Danielle A; Leufkens, Hubert G; Fox, Matthew P

    2009-01-01

    Abstract Objective To estimate the impact of global strategies, such as pooled procurement arrangements, third-party price negotiation and differential pricing, on reducing the price of antiretrovirals (ARVs), which currently hinders universal access to HIV/AIDS treatment. Methods We estimated the impact of global strategies to reduce ARV prices using data on 7253 procurement transactions (July 2002–October 2007) from databases hosted by WHO and the Global Fund to Fight AIDS, Tuberculosis and Malaria. Findings For 19 of 24 ARV dosage forms, we detected no association between price and volume purchased. For the other five ARVs, high-volume purchases were 4–21% less expensive than medium- or low-volume purchases. Nine of 13 generic ARVs were priced 6–36% lower when purchased under the Clinton Foundation HIV/AIDS Initiative (CHAI). Fifteen of 18 branded ARVs were priced 23–498% higher for differentially priced purchases compared with non-CHAI generic purchases. However, two branded, differentially priced ARVs were priced 63% and 73% lower, respectively, than generic non-CHAI equivalents. Conclusion Large purchase volumes did not necessarily result in lower ARV prices. Although current plans for pooled procurement will further increase purchase volumes, savings are uncertain and should be balanced against programmatic costs. Third-party negotiation by CHAI resulted in lower generic ARV prices. Generics were less expensive than differentially priced branded ARVs, except where little generic competition exists. Alternative strategies for reducing ARV prices, such as streamlining financial management systems, improving demand forecasting and removing barriers to generics, should be explored. PMID:19649366

  4. A New Method for Control of the Efficiency of Gear Reducers

    NASA Astrophysics Data System (ADS)

    E Kozlov, K.; Egorov, A. V.; Belogusev, V. N.

    2017-04-01

    This article proposes a new method to control the energy efficiency of gear reducers. The method allows evaluating the friction losses in a drive motor, drive motor bearing assemblies, and toothing both at the stage of control of the finished product and in the course of its operation, maintenance, and repair. The proposed method, unlike currently used methods for control of the efficiency of gear reducers, allows determining the friction losses without the use of strain measurement, which requires calibration of tensometric sensors and expensive equipment. The method is based on the idea of invariability of mechanical characteristics of the induction motor at constant voltage, resistance of windings, and mains frequency, regardless of the driven inertia mass. This paper presents experimental results which verify the theoretical predictions. The proposed method can be implemented in the procedure of acceptance test at the companies that manufacture gear reducers, thereby assess their effectiveness and the level of degradation processes that significantly affect the service life of the research object. The method can be implemented both with universal and with specialized hardware and software complexes. At that, both an increment of the inertia moment and acceleration time of a gear reducer may serve as a performance criterion.

  5. Review of analytical methods for the quantification of iodine in complex matrices.

    PubMed

    Shelor, C Phillip; Dasgupta, Purnendu K

    2011-09-19

    Iodine is an essential element of human nutrition. Nearly a third of the global population has insufficient iodine intake and is at risk of developing Iodine Deficiency Disorders (IDD). Most countries have iodine supplementation and monitoring programs. Urinary iodide (UI) is the biomarker used for epidemiological studies; only a few methods are currently used routinely for analysis. These methods either require expensive instrumentation with qualified personnel (inductively coupled plasma-mass spectrometry, instrumental nuclear activation analysis) or oxidative sample digestion to remove potential interferences prior to analysis by a kinetic colorimetric method originally introduced by Sandell and Kolthoff ~75 years ago. The Sandell-Kolthoff (S-K) method is based on the catalytic effect of iodide on the reaction between Ce(4+) and As(3+). No available technique fully fits the needs of developing countries; research into inexpensive reliable methods and instrumentation are needed. There have been multiple reviews of methods used for epidemiological studies and specific techniques. However, a general review of iodine determination on a wide-ranging set of complex matrices is not available. While this review is not comprehensive, we cover the principal developments since the original development of the S-K method. Copyright © 2011 Elsevier B.V. All rights reserved.

  6. Nearshore Measurements From a Small UAV.

    NASA Astrophysics Data System (ADS)

    Holman, R. A.; Brodie, K. L.; Spore, N.

    2016-02-01

    Traditional measurements of nearshore hydrodynamics and evolving bathymetry are expensive and dangerous and must be frequently repeated to track the rapid changes of typical ocean beaches. However, extensive research into remote sensing methods using cameras or radars mounted on fixed towers has resulted in increasingly mature algorithms for estimating bathymetry, currents and wave characteristics. This naturally raises questions about how easily and effectively these algorithms can be applied to optical data from low-cost, easily-available UAV platforms. This paper will address the characteristics and quality of data taken from a small, low-cost UAV, the DJI Phantom. In particular, we will study the stability of imagery from a vehicle `parked' at 300 feet altitude, methods to stabilize remaining wander, and the quality of nearshore bathymetry estimates from the resulting image time series, computed using the cBathy algorithm. Estimates will be compared to ground truth surveys collected at the Field Research Facility at Duck, NC.

  7. Refractive-index-matched hydrogel materials for measuring flow-structure interactions

    NASA Astrophysics Data System (ADS)

    Byron, Margaret L.; Variano, Evan A.

    2013-02-01

    In imaging-based studies of flow around solid objects, it is useful to have materials that are refractive-index-matched to the surrounding fluid. However, materials currently in use are usually rigid and matched to liquids that are either expensive or highly viscous. This does not allow for measurements at high Reynolds number, nor accurate modeling of flexible structures. This work explores the use of two hydrogels (agarose and polyacrylamide) as refractive-index-matched models in water. These hydrogels are inexpensive, can be cast into desired shapes, and have flexibility that can be tuned to match biological materials. The use of water as the fluid phase allows this method to be implemented immediately in many experimental facilities and permits investigation of high-Reynolds-number phenomena. We explain fabrication methods and present a summary of the physical and optical properties of both gels, and then show measurements demonstrating the use of hydrogel models in quantitative imaging.

  8. Greenhouse Gas Analysis by GC/MS

    NASA Astrophysics Data System (ADS)

    Bock, E. M.; Easton, Z. M.; Macek, P.

    2015-12-01

    Current methods to analyze greenhouse gases rely on designated complex, multiple-column, multiple-detector gas chromatographs. A novel method was developed in partnership with Shimadzu for simultaneous quantification of carbon dioxide (CO2), methane (CH4), and nitrous oxide (N2O) in environmental gas samples. Gas bulbs were used to make custom standard mixtures by injecting small volumes of pure analyte into the nitrogen-filled bulb. Resulting calibration curves were validated using a certified gas standard. The use of GC/MS systems to perform this analysis has the potential to move the analysis of greenhouse gasses from expensive, custom GC systems to standard single-quadrupole GC/MS systems that are available in most laboratories, which wide variety of applications beyond greenhouse gas analysis. Additionally, use of mass spectrometry can provide confirmation of identity of target analytes, and will assist in the identification of unknown peaks should they be present in the chromatogram.

  9. Differentiation of Volatile Profiles from Stockpiled Almonds at Varying Relative Humidity Levels Using Benchtop and Portable GC-MS.

    PubMed

    Beck, John J; Willett, Denis S; Gee, Wai S; Mahoney, Noreen E; Higbee, Bradley S

    2016-12-14

    Contamination by aflatoxin, a toxic metabolite produced by Aspergillus fungi ubiquitous in California almond and pistachio orchards, results in millions of dollars of lost product annually. Current detection of aflatoxin relies on destructive, expensive, and time-intensive laboratory-based methods. To explore an alternative method for the detection of general fungal growth, volatile emission profiles of almonds at varying humidities were sampled using both static SPME and dynamic needle-trap SPE followed by benchtop and portable GC-MS analysis. Despite the portable SPE/GC-MS system detecting fewer volatiles than the benchtop system, both systems resolved humidity treatments and identified potential fungal biomarkers at extremely low water activity levels. This ability to resolve humidity levels suggests that volatile profiles from germinating fungal spores could be used to create an early warning, nondestructive, portable detection system of fungal growth.

  10. 3D contour fluorescence spectroscopy with Brus model: Determination of size and band gap of double stranded DNA templated silver nanoclusters

    NASA Astrophysics Data System (ADS)

    Kamalraj, Devaraj; Yuvaraj, Selvaraj; Yoganand, Coimbatore Paramasivam; Jaffer, Syed S.

    2018-01-01

    Here, we propose a new synthetic methodology for silver nanocluster preparation by using a double stranded-DNA (ds-DNA) template which no one has reported yet. A new calculative method was formulated to determine the size of the nanocluster and their band gaps by using steady state 3D contour fluorescence technique with Brus model. Generally, the structure and size of the nanoclusters determine by using High Resolution Transmission Electron Microscopy (HR-TEM). Before imaging the samples by using HR-TEM, they are introduced to drying process which causes aggregation and forms bigger polycrystalline particles. It takes long time duration and expensive methodology. In this current methodology, we found out the size and band gap of the nanocluster in the liquid form without any polycrystalline aggregation for which 3D contour fluorescence technique was used as an alternative approach to the HR-TEM method.

  11. Analysis Methods for Progressive Damage of Composite Structures

    NASA Technical Reports Server (NTRS)

    Rose, Cheryl A.; Davila, Carlos G.; Leone, Frank A.

    2013-01-01

    This document provides an overview of recent accomplishments and lessons learned in the development of general progressive damage analysis methods for predicting the residual strength and life of composite structures. These developments are described within their State-of-the-Art (SoA) context and the associated technology barriers. The emphasis of the authors is on developing these analysis tools for application at the structural level. Hence, modeling of damage progression is undertaken at the mesoscale, where the plies of a laminate are represented as a homogenous orthotropic continuum. The aim of the present effort is establish the ranges of validity of available models, to identify technology barriers, and to establish the foundations of the future investigation efforts. Such are the necessary steps towards accurate and robust simulations that can replace some of the expensive and time-consuming "building block" tests that are currently required for the design and certification of aerospace structures.

  12. Direct Solve of Electrically Large Integral Equations for Problem Sizes to 1M Unknowns

    NASA Technical Reports Server (NTRS)

    Shaeffer, John

    2008-01-01

    Matrix methods for solving integral equations via direct solve LU factorization are presently limited to weeks to months of very expensive supercomputer time for problems sizes of several hundred thousand unknowns. This report presents matrix LU factor solutions for electromagnetic scattering problems for problem sizes to one million unknowns with thousands of right hand sides that run in mere days on PC level hardware. This EM solution is accomplished by utilizing the numerical low rank nature of spatially blocked unknowns using the Adaptive Cross Approximation for compressing the rank deficient blocks of the system Z matrix, the L and U factors, the right hand side forcing function and the final current solution. This compressed matrix solution is applied to a frequency domain EM solution of Maxwell's equations using standard Method of Moments approach. Compressed matrix storage and operations count leads to orders of magnitude reduction in memory and run time.

  13. The application of a smartphone in ship stability experiment

    NASA Astrophysics Data System (ADS)

    Djebli, Mohamed Abdelkader; Hamoudi, Benameur; Imine, Omar; Adjlout, Lahouari

    2015-12-01

    The inclining experiment is the only regulatory tool to assess ship stability. This experiment is a time consuming process for both real-life tests and ship model experiments. The difficulty is mainly due to a bias in the measurement of heel angle. Nowadays, digital inclinometers are available but they are expensive. In this study, the use of a smartphone application is presented for ship inclination and rolling-period tests. The idea consists of using accelerometer and gyroscope sensors built into the current smartphones for the measurements. Therefore, some experiments are carried out on an example trawler model to exhibit the uses and advantages of this method. The obtained results are in good agreement with those provided from the pendulum method and natural roll-period test. This application is new, easy, and more accurately assesses metacentric height during the inclining and rolling-period tests.

  14. Nanoporous alumina as templates for multifunctional applications

    NASA Astrophysics Data System (ADS)

    Sousa, C. T.; Leitao, D. C.; Proenca, M. P.; Ventura, J.; Pereira, A. M.; Araujo, J. P.

    2014-09-01

    Due to its manufacturing and size tailoring ease, porous anodic alumina (PAA) templates are an elegant physical-chemical nanopatterning approach and an emergent alternative to more sophisticated and expensive methods currently used in nanofabrication. In this review, we will describe the ground work on the fabrication methods of PAA membranes and PAA-based nanostructures. We will present the specificities of the electrochemical growth processes of multifunctional nanomaterials with diversified shapes (e.g., nanowires and nanotubes), and the fabrication techniques used to grow ordered nanohole arrays. We will then focus on the fabrication, properties and applications of magnetic nanostructures grown on PAA and illustrate their dependence on internal (diameter, interpore distance, length, composition) and external (temperature and applied magnetic field intensity and direction) parameters. Finally, the most outstanding experimental findings on PAA-grown nanostructures and their trends for technological applications (sensors, energy harvesting, metamaterials, and biotechnology) will be addressed.

  15. Expensing options solves nothing.

    PubMed

    Sahlman, William A

    2002-12-01

    The use of stock options for executive compensation has become a lightning rod for public anger, and it's easy to see why. Many top executives grew hugely rich on the back of the gains they made on their options, profits they've been able to keep even as the value they were supposed to create disappeared. The supposed scam works like this: Current accounting regulations let companies ignore the cost of option grants on their income statements, so they can award valuable option packages without affecting reported earnings. Not charging the cost of the grants supposedly leads to overstated earnings, which purportedly translate into unrealistically high share prices, permitting top executives to realize big gains when they exercise their options. If an accounting anomaly is the problem, then the solution seems obvious: Write off executive share options against the current year's revenues. The trouble is, Sahlman writes, expensing option grants won't give us a more accurate view of earnings, won't add any information not already included in the financial statements, and won't even lead to equal treatment of different forms of executive pay. Far worse, expensing evades the real issue, which is whether compensation (options and other-wise) does what it's supposed to do--namely, help a company recruit, retain, and provide the right people with appropriate performance incentives. Any performance-based compensation system has the potential to encourage cheating. Only ethical management, sensible governance, adequate internal control systems, and comprehensive disclosure will save the investor from disaster. If, Sahlman warns, we pass laws that require the expensing of options, thinking that's fixed the fundamental flaws in corporate America's accounting, we will have missed a golden opportunity to focus on the much more extensive defects in the present system.

  16. Influence of preconsolidation on consolidation quality after stamp forming of C/PEEK composites

    NASA Astrophysics Data System (ADS)

    Slange, T. K.; Warnet, L.; Grouve, W. J. B.; Akkerman, R.

    2016-10-01

    Stamp forming is a rapid manufacturing technology used to shape flat blanks of thermoplastic composite material into three-dimensional components. Currently, expensive autoclave and press consolidation are used to preconsolidate blanks. This study investigates the influence of preconsolidation on final consolidation quality after stamp forming and explores the potential of alternative blank manufacturing methods that could reduce part costs. Blanks were manufactured using various blank manufacturing methods and subsequently were stamp formed. The consolidation quality both before and after stamp forming was compared, where the focus was on void content as the main measure for consolidation quality. The void content was characterized through thickness and density measurements, as well as by microscopy analysis. Results indicate that preconsolidation quality does have an influence on the final consolidation quality. This is due to the severe deconsolidation and limited reconsolidation during stamp forming. Nevertheless, the potential of automated fiber placement and ultrasonic spot welding as alternative blank manufacturing methods was demonstrated.

  17. Artificial odor discrimination system using electronic nose and neural networks for the identification of urinary tract infection.

    PubMed

    Kodogiannis, Vassilis S; Lygouras, John N; Tarczynski, Andrzej; Chowdrey, Hardial S

    2008-11-01

    Current clinical diagnostics are based on biochemical, immunological, or microbiological methods. However, these methods are operator dependent, time-consuming, expensive, and require special skills, and are therefore, not suitable for point-of-care testing. Recent developments in gas-sensing technology and pattern recognition methods make electronic nose technology an interesting alternative for medical point-of-care devices. An electronic nose has been used to detect urinary tract infection from 45 suspected cases that were sent for analysis in a U.K. Public Health Registry. These samples were analyzed by incubation in a volatile generation test tube system for 4-5 h. Two issues are being addressed, including the implementation of an advanced neural network, based on a modified expectation maximization scheme that incorporates a dynamic structure methodology and the concept of a fusion of multiple classifiers dedicated to specific feature parameters. This study has shown the potential for early detection of microbial contaminants in urine samples using electronic nose technology.

  18. High-Throughput and Cost-Effective Characterization of Induced Pluripotent Stem Cells.

    PubMed

    D'Antonio, Matteo; Woodruff, Grace; Nathanson, Jason L; D'Antonio-Chronowska, Agnieszka; Arias, Angelo; Matsui, Hiroko; Williams, Roy; Herrera, Cheryl; Reyna, Sol M; Yeo, Gene W; Goldstein, Lawrence S B; Panopoulos, Athanasia D; Frazer, Kelly A

    2017-04-11

    Reprogramming somatic cells to induced pluripotent stem cells (iPSCs) offers the possibility of studying the molecular mechanisms underlying human diseases in cell types difficult to extract from living patients, such as neurons and cardiomyocytes. To date, studies have been published that use small panels of iPSC-derived cell lines to study monogenic diseases. However, to study complex diseases, where the genetic variation underlying the disorder is unknown, a sizable number of patient-specific iPSC lines and controls need to be generated. Currently the methods for deriving and characterizing iPSCs are time consuming, expensive, and, in some cases, descriptive but not quantitative. Here we set out to develop a set of simple methods that reduce cost and increase throughput in the characterization of iPSC lines. Specifically, we outline methods for high-throughput quantification of surface markers, gene expression analysis of in vitro differentiation potential, and evaluation of karyotype with markedly reduced cost. Published by Elsevier Inc.

  19. Review of the use of phytosterols as a detection tool for adulteration of olive oil with hazelnut oil.

    PubMed

    Azadmard-Damirchi, Sodeif

    2010-01-01

    Adulteration of virgin olive oil with less expensive oils such as hazelnut oil is a serious problem for quality control of olive oil. Detection of the presence of hazelnut oil in olive oil at low percentages (<20%) is limited with current official standard methods. In this review, various classes of phytosterols in these two oils are assessed as possible markers to detect adulterated olive oil. The composition of 4-desmethyl- and 4-monomethylsterols is similar in both oils, but the 4,4'-dimethylsterols differ. Lupeol and an unknown (lupane skeleton) compound from 4,4'-dimethylsterols are exclusively present in hazelnut oil and can be used as markers via GC-MS monitoring to detect adulteration at levels as low as 2%. The phytosterol classes need to be separated and enriched by a preparative method prior to analysis by GC or GC/MS; these SPE and TLC methods are also described in this review.

  20. Efficient Strategies for Estimating the Spatial Coherence of Backscatter

    PubMed Central

    Hyun, Dongwoon; Crowley, Anna Lisa C.; Dahl, Jeremy J.

    2017-01-01

    The spatial coherence of ultrasound backscatter has been proposed to reduce clutter in medical imaging, to measure the anisotropy of the scattering source, and to improve the detection of blood flow. These techniques rely on correlation estimates that are obtained using computationally expensive strategies. In this study, we assess existing spatial coherence estimation methods and propose three computationally efficient modifications: a reduced kernel, a downsampled receive aperture, and the use of an ensemble correlation coefficient. The proposed methods are implemented in simulation and in vivo studies. Reducing the kernel to a single sample improved computational throughput and improved axial resolution. Downsampling the receive aperture was found to have negligible effect on estimator variance, and improved computational throughput by an order of magnitude for a downsample factor of 4. The ensemble correlation estimator demonstrated lower variance than the currently used average correlation. Combining the three methods, the throughput was improved 105-fold in simulation with a downsample factor of 4 and 20-fold in vivo with a downsample factor of 2. PMID:27913342

  1. Sequence-Based Prediction of RNA-Binding Residues in Proteins.

    PubMed

    Walia, Rasna R; El-Manzalawy, Yasser; Honavar, Vasant G; Dobbs, Drena

    2017-01-01

    Identifying individual residues in the interfaces of protein-RNA complexes is important for understanding the molecular determinants of protein-RNA recognition and has many potential applications. Recent technical advances have led to several high-throughput experimental methods for identifying partners in protein-RNA complexes, but determining RNA-binding residues in proteins is still expensive and time-consuming. This chapter focuses on available computational methods for identifying which amino acids in an RNA-binding protein participate directly in contacting RNA. Step-by-step protocols for using three different web-based servers to predict RNA-binding residues are described. In addition, currently available web servers and software tools for predicting RNA-binding sites, as well as databases that contain valuable information about known protein-RNA complexes, RNA-binding motifs in proteins, and protein-binding recognition sites in RNA are provided. We emphasize sequence-based methods that can reliably identify interfacial residues without the requirement for structural information regarding either the RNA-binding protein or its RNA partner.

  2. Sequence-Based Prediction of RNA-Binding Residues in Proteins

    PubMed Central

    Walia, Rasna R.; EL-Manzalawy, Yasser; Honavar, Vasant G.; Dobbs, Drena

    2017-01-01

    Identifying individual residues in the interfaces of protein–RNA complexes is important for understanding the molecular determinants of protein–RNA recognition and has many potential applications. Recent technical advances have led to several high-throughput experimental methods for identifying partners in protein–RNA complexes, but determining RNA-binding residues in proteins is still expensive and time-consuming. This chapter focuses on available computational methods for identifying which amino acids in an RNA-binding protein participate directly in contacting RNA. Step-by-step protocols for using three different web-based servers to predict RNA-binding residues are described. In addition, currently available web servers and software tools for predicting RNA-binding sites, as well as databases that contain valuable information about known protein–RNA complexes, RNA-binding motifs in proteins, and protein-binding recognition sites in RNA are provided. We emphasize sequence-based methods that can reliably identify interfacial residues without the requirement for structural information regarding either the RNA-binding protein or its RNA partner. PMID:27787829

  3. Raman spectroscopy coupled with advanced statistics for differentiating menstrual and peripheral blood.

    PubMed

    Sikirzhytskaya, Aliaksandra; Sikirzhytski, Vitali; Lednev, Igor K

    2014-01-01

    Body fluids are a common and important type of forensic evidence. In particular, the identification of menstrual blood stains is often a key step during the investigation of rape cases. Here, we report on the application of near-infrared Raman microspectroscopy for differentiating menstrual blood from peripheral blood. We observed that the menstrual and peripheral blood samples have similar but distinct Raman spectra. Advanced statistical analysis of the multiple Raman spectra that were automatically (Raman mapping) acquired from the 40 dried blood stains (20 donors for each group) allowed us to build classification model with maximum (100%) sensitivity and specificity. We also demonstrated that despite certain common constituents, menstrual blood can be readily distinguished from vaginal fluid. All of the classification models were verified using cross-validation methods. The proposed method overcomes the problems associated with currently used biochemical methods, which are destructive, time consuming and expensive. Copyright © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  4. Metal- and additive-free photoinduced borylation of haloarenes.

    PubMed

    Mfuh, Adelphe M; Schneider, Brett D; Cruces, Westley; Larionov, Oleg V

    2017-03-01

    Boronic acids and esters have critical roles in the areas of synthetic organic chemistry, molecular sensors, materials science, drug discovery, and catalysis. Many of the current applications of boronic acids and esters require materials with very low levels of transition metal contamination. Most of the current methods for the synthesis of boronic acids, however, require transition metal catalysts and ligands that must be removed via additional purification procedures. This protocol describes a simple, metal- and additive-free method of conversion of haloarenes directly to boronic acids and esters. This photoinduced borylation protocol does not require expensive and toxic metal catalysts or ligands, and it produces innocuous and easy-to-remove by-products. Furthermore, the reaction can be carried out on multigram scales in common-grade solvents without the need for reaction mixtures to be deoxygenated. The setup and purification steps are typically accomplished within 1-3 h. The reactions can be run overnight, and the protocol can be completed within 13-16 h. Two representative procedures that are described in this protocol provide details for preparation of a boronic acid (3-cyanopheylboronic acid) and a boronic ester (1,4-benzenediboronic acid bis(pinacol)ester). We also discuss additional details of the method that will be helpful in the application of the protocol to other haloarene substrates.

  5. SALMON 2100: THE FUTURE OF WILD PACIFIC SALMON

    EPA Science Inventory

    Many experts have concluded that wild salmon recovery efforts in western North America (especially California, Oregon, Washington, Idaho, and southern British Columbia), as earnest, expensive, and socially disruptive as they currently are, do not appear likely to sustain biologic...

  6. REDUCED COST SEWER PIPE RELINING USING ULTRASONIC TAPE LAMINATION - PHASE I

    EPA Science Inventory

    Water and sewerage pipe rehabilitation represents a critical and expensive infrastructure issue. Although systems currently are available for relining existing pipes and constructing new lined pipes, the proposed advanced technology will improve the quality while substantia...

  7. 25 CFR 39.707 - Which student transportation expenses are currently not eligible for Student Transportation Funding?

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... runs; (2) Transportation home for medical or other emergencies; (3) Transportation from school to... (a)(4) of this section include: (1) Athletics; (2) Band; (3) Detention; (4) Tutoring, study hall and...

  8. Using mobile electronic devices to deliver educational resources in developing countries.

    PubMed

    Mazal, Jonathan Robert; Ludwig, Rebecca

    2015-01-01

    Developing countries have far fewer trained radiography professionals than developed countries, which exacerbates the limited access to imaging services. The lack of trained radiographers reflects, in part, limited availability of radiographer-specific educational resources. Historically, organizations that provided such resources in the developing world faced challenges related to the limited stock of current materials as well as expenses associated with shipping and delivery. Four mobile electronic devices (MEDs) were loaded with educational content (e-books, PDFs, and digital applications) spanning major radiography topics. The MEDs were distributed to 4 imaging departments in Ghana, India, Nepal, and Nigeria based on evidence of need for radiography-specific resources, as revealed by survey responses. A cost comparison of postal delivery vs digital delivery of educational content was performed. The effectiveness of delivering additional content via Wi-Fi transmission also was evaluated. Feedback was solicited on users' experience with the MEDs as a delivery tool for educational content. An initial average per e-book expense of $30.05, which included the cost of the device, was calculated for the MED delivery method compared with $15.56 for postal delivery of printed materials. The cost of the MED delivery method was reduced to an average of $10.05 for subsequent e-book deliveries. Additional content was successfully delivered via Wi-Fi transmission to all recipients during the 3-month follow-up period. Overall user feedback on the experience was positive, and ideas for enhancing the MED-based method were identified. Using MEDs to deliver radiography-specific educational content appears to be more cost effective than postal delivery of printed materials on a long-term basis. MEDs are more efficient for providing updates to educational materials. Customization of content to department needs, and using projector devices could enhance the usefulness of MEDs for radiographer training.

  9. Comparison of serological and molecular test for diagnosis of infectious mononucleosis

    PubMed Central

    Salehi, Hassan; Salehi, Marziyeh; Roghanian, Rasoul; Bozari, Majid; Taleifard, Shirin; Salehi, Mohamad Mahdi; Salehi, Maryam

    2016-01-01

    Background: Epstein-Bar virus (EBV) is the main etiology of infectious mononucleosis (IM) syndrome that is characterized by fever, sore throat, and lymph adenopathy. Since, this virus could be associated with a number of malignancies, some hematologic disorders, and chronic fatigue syndrome, identification of IM is very important. The aim of study was to evaluate the specificity, as well as sensitivity of the two different methods that is, serology versus molecular diagnosis that are currently used for diagnosis of IM. Materials and Methods: In this study, during a period of 3.5 years, 100 suspected patients as case group and 100 healthy individuals as a control group were studied. Fifty samples in each group were tested by polymerase chain reaction (PCR) and all the samples including case group and control group were carried out by enzyme-linked immunosorbent assay (ELISA). Results: In 76% of patients and in 20% of the healthy individuals, samples were detected EBV DNA by PCR. On the other hand, 68.5% of the samples belong to the case group and 46% in the control group showed positivity by ELISA. Conclusion: By comparing the two methods, since PCR is very expensive and time consuming, and the percentages of difference ranges are narrow, ELISA could be applied as a first, easiest, and preliminary diagnostic test for IM. In addition, this test could be applied in various phases of the disease with a higher sensitivity comparing to PCR. Although PCR is routinely used for diagnosis of various infectious agents, it is considered as an expensive test and merely could be used after 1-2 weeks from the onset of the illness. PMID:27308267

  10. The use of liquid chromatography-tandem mass spectrometry for therapeutic drug monitoring of antibiotics in cancer patients.

    PubMed

    El-Najjar, Nahed; Jantsch, Jonathan; Gessner, André

    2017-08-28

    Cancer remains a leading cause of mortality and morbidity worldwide. In addition to organ failure, the most frequent reasons for admission of cancer patients to intensive care units (ICU) are: infections and sepsis. As critically ill, the complexity of the health situation of cancer patients renders the standard antimicrobial regimen more complex and even inadequate which results in increased mortality rates. This is due to pathophysiological changes in the volume of distribution, increased clearance, as well as to organ dysfunction. While in the former cases a decrease in drug efficacy is observed, the hallmark of the latter one is overdosing leading to increased toxicity at the expense of efficacy. Furthermore, an additional risk factor is the potential drug-drug interaction between antibiotics and antineoplastic agents. Therefore, therapeutic drug monitoring (TDM) is a necessity to improve the clinical outcome of antimicrobial therapy in cancer patients. To be applied in routine analysis the method used for TDM should be cheap, fast and highly accurate/sensitive. Furthermore, as ICU patients are treated with a cocktail of antibiotics the method has to cover the simultaneous analysis of antibiotics used as a first/second line of treatment. The aim of the current review is to briefly survey the pitfalls in the current antimicrobial therapy and the central role of TDM in dose adjustment and drug-drug interaction's evaluation. A major section is dedicated to summarize the currently published analytical methods and to shed light on the difficulties and potential problems that can be encountered during method development.

  11. Multiple frequency audio signal communication as a mechanism for neurophysiology and video data synchronization.

    PubMed

    Topper, Nicholas C; Burke, Sara N; Maurer, Andrew Porter

    2014-12-30

    Current methods for aligning neurophysiology and video data are either prepackaged, requiring the additional purchase of a software suite, or use a blinking LED with a stationary pulse-width and frequency. These methods lack significant user interface for adaptation, are expensive, or risk a misalignment of the two data streams. A cost-effective means to obtain high-precision alignment of behavioral and neurophysiological data is obtained by generating an audio-pulse embedded with two domains of information, a low-frequency binary-counting signal and a high, randomly changing frequency. This enabled the derivation of temporal information while maintaining enough entropy in the system for algorithmic alignment. The sample to frame index constructed using the audio input correlation method described in this paper enables video and data acquisition to be aligned at a sub-frame level of precision. Traditionally, a synchrony pulse is recorded on-screen via a flashing diode. The higher sampling rate of the audio input of the camcorder enables the timing of an event to be detected with greater precision. While on-line analysis and synchronization using specialized equipment may be the ideal situation in some cases, the method presented in the current paper presents a viable, low cost alternative, and gives the flexibility to interface with custom off-line analysis tools. Moreover, the ease of constructing and implements this set-up presented in the current paper makes it applicable to a wide variety of applications that require video recording. Copyright © 2014 Elsevier B.V. All rights reserved.

  12. Virtual Stream Stage Sensor Using Projected Geometry and Augmented Reality for Crowdsourcing Citizen Science Applications

    NASA Astrophysics Data System (ADS)

    Demir, I.; Villanueva, P.; Sermet, M. Y.

    2016-12-01

    Accurately measuring the surface level of a river is a vital component of environmental monitoring and modeling efforts. Reliable data points are required for calibrating the statistical models that are used for, among other things, flood prediction and model validation. While current embedded monitoring systems provide accurate measurements, the cost to replicate this current system on a large scale is prohibitively expensive, limiting the quantity of data available. In this project, we describe a new method to accurately measure river levels using smartphone sensors. We take three pictures of the same point on the river's surface and perform calculations based on the GPS location and spatial orientation of the smartphone for each picture using projected geometry. Augmented reality is used to improve the accuracy of smartphone sensor readings. This proposed implementation is significantly cheaper than existing water measuring systems while offering similar accuracy. Additionally, since the measurements are taken by sensors that are commonly found in smartphones, crowdsourcing the collection of river measurements to citizen-scientists is possible. Thus, our proposed method leads to a much higher quantity of reliable data points than currently possible at a fraction of the cost. Sample runs and an analysis of the results are included. The presentation concludes with a discussion of future work, including applications to other fields and plans to implement a fully automated system using this method in tandem with image recognition and machine learning.

  13. Modeling Post-Accident Vehicle Egress

    DTIC Science & Technology

    2013-01-01

    interest for military situations may involve rolled-over vehicles for which detailed movement data are not available. In the current design process...test trials. These evaluations are expensive and time-consuming, and are often performed late in the design process when it is too difficult to...alter the design if weaknesses are discovered. Yet, due to the limitations of current software tools, digital human models (DHMs) are not yet widely

  14. Alternative Approaches for Screening Contaminated Sediments and Soils for PCDD/PCDF

    EPA Science Inventory

    Generating analytical data for polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/PCDF) using the traditional high resolution mass spectrometry (HRMS) analysis method, EPA Method 1613B, is time-consuming and expensive. Consequently, alternative methods to ...

  15. Analysis of Commuter Rail Costs and Cost Allocation Methods

    DOT National Transportation Integrated Search

    1983-07-01

    The report addresses the issues of commuter rail service costs and the compensation methods used to allocate railroad expenses to the commuter service function. The report consists of six sections. Section 1 describes the study purpose, scope, method...

  16. A novel reversed-phase HPLC method for the determination of urinary creatinine by pre-column derivatization with ethyl chloroformate: comparative studies with the standard Jaffé and isotope-dilution mass spectrometric assays.

    PubMed

    Leung, Elvis M K; Chan, Wan

    2014-02-01

    Creatinine is an important biomarker for renal function diagnosis and normalizing variations in urinary drug/metabolites concentration. Quantification of creatinine in biological fluids such as urine and plasma is important for clinical diagnosis as well as in biomonitoring programs and urinary metabolomics/metabonomics research. Current methods for creatinine determination either are nonselective or involve the use of expensive mass spectrometers. In this paper, a novel reversed-phase high-performance liquid chromatographic (HPLC) method for the determination of creatinine of high hydrophilicity by pre-column derivatization with ethyl chloroformate is presented. N-Ethyloxycarbonylation of creatinine significantly enhanced the hydrophobicity of creatinine, facilitating its chromatographic retention as well as quantification by HPLC. Factors governing the derivatization reaction were studied and optimized. The developed method was validated and applied for the determination of creatinine in rat urine samples. Comparative studies with isotope-dilution mass spectrometric method revealed that the two methods do not yield systematic differences in creatinine concentrations, indicating the HPLC method is suitable for the determination of creatinine in urine samples.

  17. Financial modeling of current surgical robotic system in outpatient laparoscopic cholecystectomy: how should we think about the expense?

    PubMed

    Schwaitzberg, S D

    2016-05-01

    More than 500,000 robotically assisted procedures were performed worldwide in 2013. Despite broad adoption, there remains a lack of clarity concerning the added cost of the robotic system to the procedure especially in light of an increasing number of ambulatory procedures which are now marketed by hospitals, surgeons and the manufacturer. These procedures are associated with much less reimbursement than inpatient procedures. It is unclear whether these added expenses can be absorbed in these scenarios. Reports vary in opinion concerning the added net costs during robotically assisted laparoscopic hernia or cholecystectomy. The worldwide revenues, procedures, and the installed base of robotic system data were reviewed and reanalyzed from the 2013 Intuitive Surgical Investors report. This provided an opportunity to look cost per case projections from the vantage point of actual revenue. This analysis was based on revenue of 2.27 billion US dollars in the three categories of capital acquisition, instrumentation and accessories, and service revenue. These revenues were then spread across 523,000 cases with varying assumptions. Without regard to expense offsets, the additional cost ranges from $2908 to $8675 depending on what system was purchased and the ability to distribute costs against case volume. Estimates of commercial and government revenue were then compared against these expenses. The use of the extraordinary technology in the face of low-morbidity low-cost established minimally invasive procedures needs to withstand scrutiny of outcome assessment, revenue and expense considerations and appropriateness review in order to create financially viable approaches to high-volume minimally invasive procedures. Revenue estimates associated with outpatient reimbursement make it difficult to support these expenses, recognizing inpatient procedures represent a different net financial picture.

  18. A single blue nanorod light emitting diode.

    PubMed

    Hou, Y; Bai, J; Smith, R; Wang, T

    2016-05-20

    We report a light emitting diode (LED) consisting of a single InGaN/GaN nanorod fabricated by a cost-effective top-down approach from a standard LED wafer. The device demonstrates high performance with a reduced quantum confined Stark effect compared with a standard planar counterpart fabricated from the same wafer, confirmed by optical and electrical characterization. Current density as high as 5414 A cm(-2) is achieved without significant damage to the device due to the high internal quantum efficiency. The efficiency droop is mainly ascribed to Auger recombination, which was studied by an ABC model. Our work provides a potential method for fabricating compact light sources for advanced photonic integrated circuits without involving expensive or time-consuming fabrication facilities.

  19. Template synthesis of test tube nanoparticles using non-destructive replication

    PubMed Central

    Wagner, Jonathan; Yao, Jingyuan; Rodgers, David; Hinds, Bruce

    2013-01-01

    Nano test tubes are a promising delivery vehicle for a range of therapeutics including small molecule drugs and biologics. However, current template synthesis methods of producing nano test tubes are prohibitively expensive and time consuming. Here, non-destructive template replication was used to increase nano test tube yield from porous alumina by more than a hundredfold. We demonstrate how to produce nano test tubes of several sizes and compositions including hybrid tubes with different inner and outer surfaces for targeted surface chemistry. Nano test tubes were readily suspended and stored in aqueous solutions without the need for chemical treatment. These nano test tubes should find application as delivery vehicles for therapeutics, particularly for processive “bionanoreactors” loaded with enzymes. PMID:23376956

  20. A survey of health care benefits in the apparel industry.

    PubMed

    Moore, W B

    1985-09-01

    Each day as Americans prepare to begin their days, many put on their clothing often without a thought as to how or where it was manufactured. The manufacture of clothing in the United States is a labor intensive industry pressed by competition in foreign countries where labor is abundant and less expensive; therefore, the manufacturers must look for every opportunity to reduce their costs. The survey presented here reviews the health benefit plans in the apparel industry and current initiatives for cost reduction. The results are interesting, for they give the hospital administrator vital information on the types of programs that might be in place in local manufacturers and the method of cost containment expected in this industry.

  1. CAN WE SUSTAIN WILD SALMON THROUGH 2100? THE SALMON 2100 PROJECT

    EPA Science Inventory

    abstract for presentation Many experts have concluded that wild salmon recovery efforts in western North America (especially California, Oregon, Washington, Idaho, and southern British Columbia), as earnest, expensive, and socially disruptive as they currently are, do not appe...

  2. Mobile Sensors and Applications for Air Pollutants

    EPA Science Inventory

    Executive Summary The public has long been interested in understanding what pollutants are in the air they breathe so they can best protect their environmental health and welfare. The current air quality monitoring network consists of discrete stations with expensive equipment ...

  3. 41 CFR 102-192.140 - What are your general responsibilities as a Federal mail center manager?

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ..., to minimize postage and associated printing expenses through improved mail piece design, electronic... information can be found on the United States Postal Service website at www.usps.com); (e) Keep current on new...

  4. 41 CFR 102-192.140 - What are your general responsibilities as a Federal mail center manager?

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ..., to minimize postage and associated printing expenses through improved mail piece design, electronic... information can be found on the United States Postal Service website at www.usps.com); (e) Keep current on new...

  5. Prevention of β Thalassemia in Northern Israel - a Cost-Benefit Analysis

    PubMed Central

    Koren, Ariel; Profeta, Lora; Zalman, Luci; Palmor, Haya; Levin, Carina; Zamir, Ronit Bril; Shalev, Stavit; Blondheim, Orna

    2014-01-01

    Background β Thalassemia major is characterized by hemolytic anemia, ineffective erythropoiesis and hemosiderosis. About 4% of the world population carries a Thalassemia gene. Management includes blood transfusions and iron chelation. However, this treatment is costly, and population screening may be significantly more cost beneficial. Purpose The purpose of the current study is to analyze the cost of running a prevention program for β Thalassemia in Israel and to compare it to the actual expenses incurred by treating Thalassemia patients. Methods Three cost parameters were analyzed and compared: the prevention program, routine treatment of patients and treatment of complications. An estimation of the expenses needed to treat patients who present with complications was calculated based on our ongoing experience in treating deteriorating patients. Results and Conclusions The cost of preventing one affected newborn was $63,660 compared to $1,971,380 for treatment of a patient during 50 years (mean annual cost: $39,427). Thus, the prevention of 45 affected newborns over a ten year period represents a net saving of $88.5 million to the health budget. Even after deducting the cost of the prevention program ($413.795/year), the program still represents a benefit of $76 million over ten years. Each prevented case could pay the screening and prevention program for 4.6 years. PMID:24678389

  6. Generation of a Chinese Hamster Ovary Cell Line Producing Recombinant Human Glucocerebrosidase

    PubMed Central

    Novo, Juliana Branco; Morganti, Ligia; Moro, Ana Maria; Paes Leme, Adriana Franco; Serrano, Solange Maria de Toledo; Raw, Isaias; Ho, Paulo Lee

    2012-01-01

    Impaired activity of the lysosomal enzyme glucocerebrosidase (GCR) results in the inherited metabolic disorder known as Gaucher disease. Current treatment consists of enzyme replacement therapy by administration of exogenous GCR. Although effective, it is exceptionally expensive, and patients worldwide have a limited access to this medicine. In Brazil, the public healthcare system provides the drug free of charge for all Gaucher's patients, which reaches the order of $ 84 million per year. However, the production of GCR by public institutions in Brazil would reduce significantly the therapy costs. Here, we describe a robust protocol for the generation of a cell line producing recombinant human GCR. The protein was expressed in CHO-DXB11 (dhfr−) cells after stable transfection and gene amplification with methotrexate. As expected, glycosylated GCR was detected by immunoblotting assay both as cell-associated (~64 and 59 kDa) and secreted (63–69 kDa) form. Analysis of subclones allowed the selection of stable CHO cells producing a secreted functional enzyme, with a calculated productivity of 5.14 pg/cell/day for the highest producer. Although being laborious, traditional methods of screening high-producing recombinant cells may represent a valuable alternative to generate expensive biopharmaceuticals in countries with limited resources. PMID:23091360

  7. Affordable measurement of human total energy expenditure and body composition using one-tenth dose doubly labelled water.

    PubMed

    Mann, D V; Ho, C S; Critchley, L; Fok, B S P; Pang, E W H; Lam, C W K; Hjelm, N M

    2007-05-01

    The doubly labelled water (DLW) method is the technique of choice for measurement of free-living total energy expenditure (TEE) in humans. A major constraint on the clinical applicability of the method has been the expense of the (18)O isotope. We have used a reduced-dose (one-tenth of the currently recommended standard dose) of DLW for the measurement of TEE and body composition in nine healthy adult male volunteers. TEE measured by reduced-dose DLW was positively correlated with resting energy expenditure measured by metabolic cart (r=0.87, P<0.01). Isotope-derived fat mass and body mass index were strongly correlated (r=0.86, P<0.01). In four subjects in whom we performed a complementary evaluation using standard-dose isotope enrichment, the TEE measurements were satisfactorily comparable (mean+/-s.d.: reduced dose 2586+/-155 kcal/day vs standard dose 2843+/-321 kcal/day; mean difference 257+/-265 kcal/day). These data indicate that DLW measurements of human energy expenditure and body composition can be performed at a substantially reduced dose (and cost) of isotope enrichment than is currently employed.

  8. A Buoyancy-based Method of Determining Fat Levels in Drosophila.

    PubMed

    Hazegh, Kelsey E; Reis, Tânia

    2016-11-01

    Drosophila melanogaster is a key experimental system in the study of fat regulation. Numerous techniques currently exist to measure levels of stored fat in Drosophila, but most are expensive and/or laborious and have clear limitations. Here, we present a method to quickly and cheaply determine organismal fat levels in L3 Drosophila larvae. The technique relies on the differences in density between fat and lean tissues and allows for rapid detection of fat and lean phenotypes. We have verified the accuracy of this method by comparison to body fat percentage as determined by neutral lipid extraction and gas chromatography coupled with mass spectrometry (GCMS). We furthermore outline detailed protocols for the collection and synchronization of larvae as well as relevant experimental recipes. The technique presented below overcomes the major shortcomings in the most widely used lipid quantitation methods and provides a powerful way to quickly and sensitively screen L3 larvae for fat regulation phenotypes while maintaining the integrity of the larvae. This assay has wide applications for the study of metabolism and fat regulation using Drosophila.

  9. Remote control system for high-perfomance computer simulation of crystal growth by the PFC method

    NASA Astrophysics Data System (ADS)

    Pavlyuk, Evgeny; Starodumov, Ilya; Osipov, Sergei

    2017-04-01

    Modeling of crystallization process by the phase field crystal method (PFC) - one of the important directions of modern computational materials science. In this paper, the practical side of the computer simulation of the crystallization process by the PFC method is investigated. To solve problems using this method, it is necessary to use high-performance computing clusters, data storage systems and other often expensive complex computer systems. Access to such resources is often limited, unstable and accompanied by various administrative problems. In addition, the variety of software and settings of different computing clusters sometimes does not allow researchers to use unified program code. There is a need to adapt the program code for each configuration of the computer complex. The practical experience of the authors has shown that the creation of a special control system for computing with the possibility of remote use can greatly simplify the implementation of simulations and increase the performance of scientific research. In current paper we show the principal idea of such a system and justify its efficiency.

  10. Acoustic inspection of concrete bridge decks

    NASA Astrophysics Data System (ADS)

    Henderson, Mark E.; Dion, Gary N.; Costley, R. Daniel

    1999-02-01

    The determination of concrete integrity, especially in concrete bridge decks, is of extreme importance. Current systems for testing concrete structures are expensive, slow, or tedious. State of the art systems use ground penetrating radar, but they have inherent problems especially with ghosting and signal signature overlap. The older method of locating delaminations in bridge decks involves either tapping on the surface with a hammer or metal rod, or dragging a chain-bar across the bridge deck. Both methods require a `calibrated' ear to determine the difference between good sections and bad sections of concrete. As a consequence, the method is highly subjective, different from person to person and even day to day for a given person. In addition, archival of such data is impractical, or at least improbable, in most situations. The Diagnostic Instrumentation and Analysis Laboratory has constructed an instrument that implements the chain-drag method of concrete inspection. The system is capable of real-time analysis of recorded signals, archival of processed data, and high-speed data acquisition so that post-processing of the data is possible for either research purposes or for listening to the recorded signals.

  11. Financial perspective of private pharmacies in Tehran (Iran); is it a lucrative business?

    PubMed Central

    2012-01-01

    Background and purpose of the study Pharmacies as direct providers of medicine and pharmaceutical services to patients have an important role in the health status of a society. The assessment of their financial situations by healthcare policy makers is necessary to prevent any negative effects on population's health. In this study we aim to analyze the financial status of pharmacies in Tehran, Iran. Methods This study is a cross-sectional study based on a survey. Two-hundred and eighty-eight private community daytime pharmacies in Tehran were selected by random sampling. We used two questionnaires to collect data regarding cost, expense and income factors of private pharmacies and the significance of each of them from these selected pharmacies. The data was collected in 2011 from Tehran pharmacies. Profitability of pharmacies in Tehran, Iran was calculated in its current situation and then estimated for three defined scenarios: 1. The dispensing fee is omitted (ceteris paribus), 2. Pharmacies are prohibited from selling hygienic & cosmetic products (ceteris paribus), 3. Scenarios 1 and 2 together (ceteris paribus). These data were analyzed by using SPSS and descriptive-analytic statistics. Results About 68% of interviewees responded to our questionnaires. Our analysis indicated that the average annual costs (and expenses), income and profits of pharmacies are 73,181; 106,301; and 33,120 United States Dollar (USD), respectively. The analysis indicated that omission of dispensing fee (scenario 1) and prohibition of pharmacies from selling hygienic & cosmetic products (scenario 2) would decrease income of pharmacies to 18438 and 14034 USD/year, respectively. According to respondents, the cost (or expense) of properties and buildings, energy, taxes, delays in reimbursement by insurance companies, and renting the place of pharmacy could be considered as cost factors and prescription medicines, OTC medicines, dispensing fees, hygienic & cosmetic products, and long-term payment to pharmaceutical distribution companies as income factors, which have significant effects on a pharmacy's economy. Major conclusions According to the results of this study, regarding the pharmacies' cost (and expenses) and incomes, the omission of dispensing fees for prescriptions has considerable negative effects on the profitability of pharmacies and likely on society's health. PMID:23351226

  12. Methods for Estimating Payload/Vehicle Design Loads

    NASA Technical Reports Server (NTRS)

    Chen, J. C.; Garba, J. A.; Salama, M. A.; Trubert, M. R.

    1983-01-01

    Several methods compared with respect to accuracy, design conservatism, and cost. Objective of survey: reduce time and expense of load calculation by selecting approximate method having sufficient accuracy for problem at hand. Methods generally applicable to dynamic load analysis in other aerospace and other vehicle/payload systems.

  13. Example of cost calculations for an operating room and a post-anaesthesia care unit.

    PubMed

    Raft, J; Millet, F; Meistelman, C

    2015-08-01

    The aim of this study was to evaluate the cost of an operating room using data from our hospital. Using an accounting-based method helped us. Over the year 2012, the sum of direct and indirect expenses with cost sharing expenses allowed us to calculate the cost of the operating room (OR) and of the post-anaesthesia care unit (PACU). The cost of the OR and PACU was €10.8 per minute of time offered. Two thirds of the direct expenses were allocated to surgery and one third to anaesthesia. Indirect expenses were 25% of the direct expenses. The cost of medications and single use medical devises was €111.45 per anaesthesia. The total cost of anaesthesia (taking into account wages and indirect expenses) was €753.14 per anaesthesia as compared to the total cost of the anaesthesia. The part of medications and single use devices for anaesthesia was 14.8% of the total cost. Despite the difficulties facing cost evaluation, this model of calculation, assisted by the cost accounting controller, helped us to have a concrete financial vision. It also shows that a global reflexion is necessary during financial decision-making. Copyright © 2015 Société française d’anesthésie et de réanimation (Sfar). Published by Elsevier Masson SAS. All rights reserved.

  14. Identifying Recent HIV Infections: From Serological Assays to Genomics.

    PubMed

    Moyo, Sikhulile; Wilkinson, Eduan; Novitsky, Vladimir; Vandormael, Alain; Gaseitsiwe, Simani; Essex, Max; Engelbrecht, Susan; de Oliveira, Tulio

    2015-10-23

    In this paper, we review serological and molecular based methods to identify HIV infection recency. The accurate identification of recent HIV infection continues to be an important research area and has implications for HIV prevention and treatment interventions. Longitudinal cohorts that follow HIV negative individuals over time are the current gold standard approach, but they are logistically challenging, time consuming and an expensive enterprise. Methods that utilize cross-sectional testing and biomarker information have become an affordable alternative to the longitudinal approach. These methods use well-characterized biological makers to differentiate between recent and established HIV infections. However, recent results have identified a number of limitations in serological based assays that are sensitive to the variability in immune responses modulated by HIV subtypes, viral load and antiretroviral therapy. Molecular methods that explore the dynamics between the timing of infection and viral evolution are now emerging as a promising approach. The combination of serological and molecular methods may provide a good solution to identify recent HIV infection in cross-sectional data. As part of this review, we present the advantages and limitations of serological and molecular based methods and their potential complementary role for the identification of HIV infection recency.

  15. Mapping and navigational control for a “smart” wheelchair.

    PubMed

    Schultz, Dana L; Shea, Kathleen M; Barrett, Steven F

    2012-01-01

    A “smart” wheelchair is in development to provide mobility to those unable to control a traditional wheelchair. A “smart” wheelchair is an autonomous machine with the ability to navigate a mapped environment while avoiding obstacles. The flexibility and complex design of “smart” wheelchairs have made those currently available expensive. Ongoing research at the University of Wyoming has been aimed at designing a cheaper, alternative control system that could be interfaced with a typical powered wheelchair. The goal of this project is to determine methods for mapping and navigational control for the wheelchair. The control system acquires data from eighteen sensors and uses the data to navigate around a pre-programmed map which is stored on a micro SD card. The control system also provides a user interface in the form of a touchscreen LCD. The designed system will be an easy-to-use and cost effective alternative to current “smart” wheelchair technology.

  16. Pluripotent Stem Cells in Research and Treatment of Hemoglobinopathies

    PubMed Central

    Arora, Natasha; Daley, George Q.

    2012-01-01

    Pluripotent stem cells (PSCs) hold great promise for research and treatment of hemoglobinopathies. In principle, patient-specific induced pluripotent stem cells could be derived from a blood sample, genetically corrected to repair the disease-causing mutation, differentiated into hematopoietic stem cells (HSCs), and returned to the patient to provide a cure through autologous gene and cell therapy. However, there are many challenges at each step of this complex treatment paradigm. Gene repair is currently inefficient in stem cells, but use of zinc finger nucleases and transcription activator-like effector nucleases appear to be a major advance. To date, no successful protocol exists for differentiating PSCs into definitive HSCs. PSCs can be directly differentiated into primitive red blood cells, but not yet in sufficient numbers to enable treating patients, and the cost of clinical scale differentiation is prohibitively expensive with current differentiation methods and efficiencies. Here we review the progress, promise, and remaining hurdles in realizing the potential of PSCs for cell therapy. PMID:22474618

  17. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Jabbar, Muhandis Abdul, E-mail: muhandis.abdul@sci.ui.ac.id; Prawito

    A solar cell is one of many alternative energy which is still being developed and it works by converting sunlight into electricity. In order to use a solar cell, a deep knowledge about the solar cell’s characteristics is needed. The current and voltage (I-V) produced when the light hits the solar cell surface with a certain value of intensity and at a certain value of temperature becomes the basic study to determine solar cell characteristics. In the past decade, there were so many developments of devices to characterize solar cells and solar panels. One of them used a MOSFET devicemore » for varying electronic load to observe solar cell current and voltage responses. However, many devices which have been developed even device on the market using many expensive tools and quite complex. Therefore in this research, a simple low cost electronic controlled device for solar cell characterization is built based on MOSFET method and a microcontroller but still has high reliability and accuracy.« less

  18. Physician Awareness of Drug Cost: A Systematic Review

    PubMed Central

    Allan, G. Michael; Lexchin, Joel; Wiebe, Natasha

    2007-01-01

    Background Pharmaceutical costs are the fastest-growing health-care expense in most developed countries. Higher drug costs have been shown to negatively impact patient outcomes. Studies suggest that doctors have a poor understanding of pharmaceutical costs, but the data are variable and there is no consistent pattern in awareness. We designed this systematic review to investigate doctors' knowledge of the relative and absolute costs of medications and to determine the factors that influence awareness. Methods and Findings Our search strategy included The Cochrane Library, EconoLit, EMBASE, and MEDLINE as well as reference lists and contact with authors who had published two or more articles on the topic or who had published within 10 y of the commencement of our review. Studies were included if: either doctors, trainees (interns or residents), or medical students were surveyed; there were more than ten survey respondents; cost of pharmaceuticals was estimated; results were expressed quantitatively; there was a clear description of how authors defined “accurate estimates”; and there was a description of how the true cost was determined. Two authors reviewed each article for eligibility and extracted data independently. Cost accuracy outcomes were summarized, but data were not combined in meta-analysis because of extensive heterogeneity. Qualitative data related to physicians and drug costs were also extracted. The final analysis included 24 articles. Cost accuracy was low; 31% of estimates were within 20% or 25% of the true cost, and fewer than 50% were accurate by any definition of cost accuracy. Methodological weaknesses were common, and studies of low methodological quality showed better cost awareness. The most important factor influencing the pattern and accuracy of estimation was the true cost of therapy. High-cost drugs were estimated more accurately than inexpensive ones (74% versus 31%, Chi-square p < 0.001). Doctors consistently overestimated the cost of inexpensive products and underestimated the cost of expensive ones (binomial test, 89/101, p < 0.001). When asked, doctors indicated that they want cost information and feel it would improve their prescribing but that it is not accessible. Conclusions Doctors' ignorance of costs, combined with their tendency to underestimate the price of expensive drugs and overestimate the price of inexpensive ones, demonstrate a lack of appreciation of the large difference in cost between inexpensive and expensive drugs. This discrepancy in turn could have profound implications for overall drug expenditures. Much more focus is required in the education of physicians about costs and the access to cost information. Future research should focus on the accessibility and reliability of medical cost information and whether the provision of this information is used by doctors and makes a difference to physician prescribing. Additionally, future work should strive for higher methodological standards to avoid the biases we found in the current literature, including attention to the method of assessing accuracy that allows larger absolute estimation ranges for expensive drugs. PMID:17896856

  19. 7 CFR 3560.303 - Housing project budgets.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... history, current circumstances, and market conditions. (3) Borrowers must document that the operating expenses included in the budget accurately reflect reasonable and necessary costs to operate the housing... personnel costs of permanent and part-time staff assigned directly to the project site. This includes...

  20. WILD SALMON IN WESTERN NORTH AMERICA: FORECASTING THE MOST LIKELY STATUS IN 2100

    EPA Science Inventory

    The future of wild salmon in western North America (especially California, Oregon, Washington, Idaho, and southern British Columbia), as earnest, expensive, and socially disruptive as current recovery efforts are, does not appear likely to realize sustain biologically significan...

  1. WILD SALMON IN WESTERN NORTH AMERICA; THE HISTORICAL AND POLICY CONTEXT

    EPA Science Inventory

    Nearly all of the participants in the Salmon 2100 Project concluded that wild salmon recovery efforts in western North America (especially California, Oregon, Washington, Idaho, and southern British Columbia), as earnest, expensive, and socially disruptive as they currently are, ...

  2. Assuring the Safety of Chemicals through Improved Exposure Science

    EPA Science Inventory

    Thousands of chemicals are currently in commercial use and hundreds more are introduced each year. Of these, only a small fraction has been assessed adequately for potential risks. Existing chemical testing and exposure measurement protocols are expensive and time consuming. Fu...

  3. DOTD support for UTC project : travel time estimation using bluetooth, [research project capsule].

    DOT National Transportation Integrated Search

    2013-10-01

    Travel time estimates are useful tools for measuring congestion in an urban area. Current : practice involves using probe vehicles or video cameras to measure travel time, but this is a laborintensive and expensive means of obtaining the information....

  4. The Economic Impact of Implementing Nondestructive Testing of Reinforced Concrete Bridge Decks in Indiana

    DOT National Transportation Integrated Search

    2016-08-01

    The deck is among the most expensive components of a bridge over its lifetime because of the frequent and costly maintenance and rehabilitation required. Currently, the Indiana Department of Transportation (INDOT) performs visual inspections of a bri...

  5. Content Standards: High Stakes Anti-Differentiation

    ERIC Educational Resources Information Center

    Schroeder-Davis, Stephen

    2011-01-01

    Currently, American schooling, driven by No Child Left Behind (NCLB) and standardized tests, emphasizes development of intelligence. Because of this, teachers must heavily emphasize acquisition of foundational information (facts) in lectures, assessments, and of course, time-consuming test preparation, at the expense of intellect, that…

  6. Golden Handcuffs

    ERIC Educational Resources Information Center

    Costrell, Robert M.; Podgursky, Michael

    2010-01-01

    Teacher pensions consume a substantial portion of school budgets. If relatively generous pensions help attract effective teachers, the expense might be justified. But new evidence suggests that current pension systems, by concentrating benefits on teachers who spend their entire careers in a single state and penalizing mobile teachers, may…

  7. H2S-mediated thermal and photochemical methane activation.

    PubMed

    Baltrusaitis, Jonas; de Graaf, Coen; Broer, Ria; Patterson, Eric V

    2013-12-02

    Sustainable, low-temperature methods for natural gas activation are critical in addressing current and foreseeable energy and hydrocarbon feedstock needs. Large portions of natural gas resources are still too expensive to process due to their high content of hydrogen sulfide gas (H2S) mixed with methane, deemed altogether as sub-quality or "sour" gas. We propose a unique method of activation to form a mixture of sulfur-containing hydrocarbon intermediates, CH3SH and CH3SCH3 , and an energy carrier such as H2. For this purpose, we investigated the H2S-mediated methane activation to form a reactive CH3SH species by means of direct photolysis of sub-quality natural gas. Photoexcitation of hydrogen sulfide in the CH4 + H2S complex resulted in a barrierless relaxation by a conical intersection to form a ground-state CH3SH + H2 complex. The resulting CH3SH could further be coupled over acidic catalysts to form higher hydrocarbons, and the resulting H2 used as a fuel. This process is very different from conventional thermal or radical-based processes and can be driven photolytically at low temperatures, with enhanced control over the conditions currently used in industrial oxidative natural gas activation. Finally, the proposed process is CO2 neutral, as opposed to the current industrial steam methane reforming (SMR). Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  8. 26 CFR 1.267(a)-1 - Deductions disallowed.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... accrual method of accounting. For example, if the accrued expenses or interest are paid after the... an accrual method of accounting. A uses a combination of accounting methods permitted under section... disbursements method of accounting with respect to such items of gross income for his taxable year in which or...

  9. A convenient method for determining the concentration of hydrogen in water: use of methylene blue with colloidal platinum

    PubMed Central

    2012-01-01

    A simple titration (oxidimetry) method using a methylene blue-platinum colloid reagent is effective in determining the concentration of hydrogen gas in an aqueous solution. The method performs as effectively as the more complex and expensive electrochemical method. PMID:22273079

  10. Low-cost/high-efficiency lasers for medical applications in the 14XX-nm regime

    NASA Astrophysics Data System (ADS)

    Callahan, J. J.; McIntyre, E.; Rafferty, C.; Yanushefski, L.; Bean, D. M.

    2011-03-01

    Laser therapy is becoming an increasingly popular method of treating numerous dermatological conditions. The widespread use of these devices is often limited by the cost and size. Low cost, portable lasers would expand the laser market further into homes, general practitioners, dermatologists, plastic surgeons, and 3rd world countries. There are numerous light devices currently on the market for hair removal and growth, acne reduction, and wrinkles. These devices are varied, from LEDs to intense pulsed light (IPL) to lasers. One particular disease is leishmaniasis, caused by a parasite carried by sand flies, most often occurring in third world countries. While there are drug therapies available, they sometimes require hospitalization for several days and are very expensive. An RF device has been FDA approved for treatment of leishmaniasis, but costs about $20,000 which is too expensive for widespread use. Since the method is heating the lesion, the same affect could be achieved using an infrared laser. Diode lasers have the capability to be produced in mass quantity for low costs, as shown by the ubiquity of diode lasers in the telecom industry and household appliances. Unfortunately, many diode lasers suffer from poor efficiency, particularly in wavelengths for dermatology. Advances are being made to improve wall plug efficiency of lasers to reduce waste heat and increase output power. In this paper, those efforts being made to develop manufacturing partners to lower the cost while increasing the production volume of long wavelength lasers will be discussed along with performance data and clinical results.

  11. Comparison of serological and molecular test for diagnosis of infectious mononucleosis.

    PubMed

    Salehi, Hassan; Salehi, Marziyeh; Roghanian, Rasoul; Bozari, Majid; Taleifard, Shirin; Salehi, Mohamad Mahdi; Salehi, Maryam

    2016-01-01

    Epstein-Bar virus (EBV) is the main etiology of infectious mononucleosis (IM) syndrome that is characterized by fever, sore throat, and lymph adenopathy. Since, this virus could be associated with a number of malignancies, some hematologic disorders, and chronic fatigue syndrome, identification of IM is very important. The aim of study was to evaluate the specificity, as well as sensitivity of the two different methods that is, serology versus molecular diagnosis that are currently used for diagnosis of IM. In this study, during a period of 3.5 years, 100 suspected patients as case group and 100 healthy individuals as a control group were studied. Fifty samples in each group were tested by polymerase chain reaction (PCR) and all the samples including case group and control group were carried out by enzyme-linked immunosorbent assay (ELISA). In 76% of patients and in 20% of the healthy individuals, samples were detected EBV DNA by PCR. On the other hand, 68.5% of the samples belong to the case group and 46% in the control group showed positivity by ELISA. By comparing the two methods, since PCR is very expensive and time consuming, and the percentages of difference ranges are narrow, ELISA could be applied as a first, easiest, and preliminary diagnostic test for IM. In addition, this test could be applied in various phases of the disease with a higher sensitivity comparing to PCR. Although PCR is routinely used for diagnosis of various infectious agents, it is considered as an expensive test and merely could be used after 1-2 weeks from the onset of the illness.

  12. What Does It Cost to Improve Household Diets in Nepal? Using the Cost of the Diet Method to Model Lowest Cost Dietary Changes.

    PubMed

    Biehl, Erin; Klemm, Rolf D W; Manohar, Swetha; Webb, Patrick; Gauchan, Devendra; West, Keith P

    2016-07-03

    In Nepal, limited availability and affordability of nutritious foods contribute to malnutrition. To identify nutrient deficiencies in commonly consumed diets and model lowest cost changes that could improve diet quality in 3 agroecological zones of Nepal. In August to September 2014, we collected market price and women's food frequency data from 3 representative villages in Nepal's mountains (Mahat Gaun, Jumla, n = 181 households), hills (Sitapur, Arghakhanchi, n = 166), and terai (Saigaun, Banke, n = 232) and verified local diets during women's group discussions. Using the Cost of the Diet method, we compared models of the most nutritious version of a commonly consumed diet given locally available foods ("common diet") with the cheapest possible diet meeting nutrient requirements, including foods not currently available ("optimal diet"). The household common diet lacks sufficient vitamin B12, riboflavin, and calcium in the mountains; B6, B12, calcium, and iron in the hills; vitamin A, calcium, and iron in the terai. Adding fish to the mountain and hill diets and increasing dark green leafy vegetable consumption in all zones yielded nutritional adequacy. Optimal diets are more expensive than the common diet in the mountains and hills but less expensive in the terai. The modeled lowest cost diet commonly eaten in 3 Nepalese communities lacks key nutrients. Policies and interventions that increase market availability and consumption of vitamin B12- and calcium-rich fish and dark green leafy vegetables could improve local diets, particularly in the mountains and hills. © The Author(s) 2016.

  13. Vibratory high pressure coal feeder having a helical ramp

    DOEpatents

    Farber, Gerald

    1978-01-01

    Apparatus and method for feeding powdered coal from a helical ramp into a high pressure, heated, reactor tube containing hydrogen for hydrogenating the coal and/or for producing useful products from coal. To this end, the helical ramp is vibrated to feed the coal cleanly at an accurately controlled rate in a simple reliable and trouble-free manner that eliminates complicated and expensive screw feeders, and/or complicated and expensive seals, bearings and fully rotating parts.

  14. Toxic reagents and expensive equipment: are they really necessary for the extraction of good quality fungal DNA?

    PubMed

    Rodrigues, P; Venâncio, A; Lima, N

    2018-01-01

    The aim of this work was to evaluate a fungal DNA extraction procedure with the lowest inputs in terms of time as well as of expensive and toxic chemicals, but able to consistently produce genomic DNA of good quality for PCR purposes. Two types of fungal biological material were tested - mycelium and conidia - combined with two protocols for DNA extraction using Sodium Dodecyl Sulphate (SDS) and Cetyl Trimethyl Ammonium Bromide as extraction buffers and glass beads for mechanical disruption of cell walls. Our results showed that conidia and SDS buffer was the combination that lead to the best DNA quality and yield, with the lowest variation between samples. This study clearly demonstrates that it is possible to obtain high yield and pure DNA from pigmented conidia without the use of strong cell disrupting procedures and of toxic reagents. There are numerous methods for DNA extraction from fungi. Some rely on expensive commercial kits and/or equipments, unavailable for many laboratories, or make use of toxic chemicals such as chloroform, phenol and mercaptoethanol. This study clearly demonstrates that it is possible to obtain high yields of pure DNA from pigmented conidia without the use of strong and expensive cell disrupting procedures and of toxic reagents. The method herein described is simultaneously inexpensive and adequate to DNA extraction from several different types of fungi. © 2017 The Society for Applied Microbiology.

  15. Current Measurements and Overwash Monitoring Using Tilt Current Meters in Three Coastal Environments

    NASA Astrophysics Data System (ADS)

    Lowell, N. S.; Sherwood, C. R.; Decarlo, T. M.; Grant, J. R.

    2014-12-01

    Tilt Current Meters (TCMs) provide accurate, cost effective measurements of near-bottom current velocities. Many studies in coastal environments require current measurements, which are frequently made with Acoustic Doppler Profilers (ADPs). ADPs are expensive, however, and may not be suitable for locations where there is significant risk of damage, loss, or theft or where a large spatial array of measurements is required. TCMs, by contrast, are smaller, less expensive, and easier to deploy. This study tested TCMs in three sites to determine their suitability for use in research applications. TCMs are based on the drag-tilt principle, where the instrument tilts in response to current. The meter consists of a buoyant float with an onboard accelerometer, three-axis tilt sensor, three-axis magnetometer (compass), and a data logger. Current measurements are derived by post processing the tilt and compass values and converting them to velocity using empirical calibration data. Large data-storage capacity (4 GB) and low power requirements allow long deployments (many months) at high sample rates (16 Hz). We demonstrate the utility of TCM current measurements on a reef at Dongsha Atoll in the South China Sea, and in Vineyard Sound off Cape Cod, where the TCM performance was evaluated against ADP measurements. We have also used the TCM to record waves during an overwash event on a Cape Cod barrier beach during a winter storm. The TCM recorded waves as they came through the overwash channel, and the data were in agreement with the water-level record used as a reference. These tests demonstrate that TCMs may be used in a variety of near shore environments and have the potential to significantly increase the density of meters in future studies were current measurements are required.

  16. Life cycle assessment for dredged sediment placement strategies.

    PubMed

    Bates, Matthew E; Fox-Lent, Cate; Seymour, Linda; Wender, Ben A; Linkov, Igor

    2015-04-01

    Dredging to maintain navigable waterways is important for supporting trade and economic sustainability. Dredged sediments are removed from the waterways and then must be managed in a way that meets regulatory standards and properly balances management costs and risks. Selection of a best management alternative often results in stakeholder conflict regarding tradeoffs between local environmental impacts associated with less expensive alternatives (e.g., open water placement), more expensive measures that require sediment disposal in constructed facilities far away (e.g., landfills), or beneficial uses that may be perceived as risky (e.g., beach nourishment or island creation). Current sediment-placement decisions often focus on local and immediate environmental effects from the sediment itself, ignoring a variety of distributed and long-term effects from transportation and placement activities. These extended effects have implications for climate change, resource consumption, and environmental and human health, which may be meaningful topics for many stakeholders not currently considered. Life-Cycle Assessment (LCA) provides a systematic and quantitative method for accounting for this wider range of impacts and benefits across all sediment management project stages and time horizons. This paper applies a cradle-to-use LCA to dredged-sediment placement through a comparative analysis of potential upland, open water, and containment-island placement alternatives in the Long Island Sound region of NY/CT. Results suggest that, in cases dealing with uncontaminated sediments, upland placement may be the most environmentally burdensome alternative, per ton-kilometer of placed material, due to the emissions associated with diesel fuel combustion and electricity production and consumption required for the extra handling and transportation. These results can be traded-off with the ecosystem impacts of the sediments themselves in a decision-making framework. Published by Elsevier B.V.

  17. 12 CFR 611.1250 - Preliminary exit fee estimate.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... independently audited by a qualified public accountant. We may, in our discretion, waive the audit requirement... termination. Related expenses include, but are not limited to, legal services, accounting services, tax... institution and its stockholders. (ii) Subtract the dollar amount of estimated current and deferred tax...

  18. Return on Investment from Biochar Application

    USDA-ARS?s Scientific Manuscript database

    Current literature has yet to fully address the cost of biochar application or the return on investment to the grower. The objectives were to identify possible on-farm spreader equipment, spreader capacity, application expenses, and rate of return needed for growers to apply biochar economically. Bi...

  19. CAN WE GET THERE FROM HERE: SALMON IN THE 21ST CENTURY (SYNTHESIS CHAPTER)

    EPA Science Inventory

    Many experts have concluded that wild salmon recovery efforts in western North America (especially California, Oregon, Washington, Idaho, and southern British Columbia), as earnest, expensive, and socially disruptive as they currently are, do not appear likely to sustain biologic...

  20. 12 CFR 1261.20 - Definitions.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ...: Compensation means any payment of money or the provision of any other thing of current or potential value in connection with service as a director. Compensation includes all direct and indirect payments of benefits... reasonable travel, subsistence and other related expenses incurred in connection with the performance of...

  1. Retiree Health Care: A Ticking Bomb.

    ERIC Educational Resources Information Center

    Daniels, Craig E.; Daniels, Janet D.

    1992-01-01

    With health insurance costs soaring for both current employees and retirees, governing boards of institutions of higher education must contain costs. Possible strategies include shifting some expenses from employer to employee, establishing flexible-benefit or cafeteria plans, using managed care to reduce unnecessary medical procedures,…

  2. Hypothesis for cognitive effects of transcranial direct current stimulation: Externally- and internally-directed cognition.

    PubMed

    Greenwood, Pamela M; Blumberg, Eric J; Scheldrup, Melissa R

    2018-03-01

    A comprehensive explanation is lacking for the broad array of cognitive effects modulated by transcranial direct current stimulation (tDCS). We advanced the testable hypothesis that tDCS to the default mode network (DMN) increases processing of goals and stored information at the expense of external events. We further hypothesized that tDCS to the dorsal attention network (DAN) increases processing of external events at the expense of goals and stored information. A literature search (PsychINFO) identified 42 empirical studies and 3 meta-analyses examining effects of prefrontal and/or parietal tDCS on tasks that selectively required external and/or internal processing. Most, though not all, of the studies that met our search criteria supported our hypothesis. Three meta-analyses supported our hypothesis. The hypothesis we advanced provides a framework for the design and interpretation of results in light of the role of large-scale intrinsic networks that govern attention. Copyright © 2017 Elsevier Ltd. All rights reserved.

  3. Preliminary Structural Sensitivity Study of Hypersonic Inflatable Aerodynamic Decelerator Using Probabilistic Methods

    NASA Technical Reports Server (NTRS)

    Lyle, Karen H.

    2014-01-01

    Acceptance of new spacecraft structural architectures and concepts requires validated design methods to minimize the expense involved with technology validation via flighttesting. This paper explores the implementation of probabilistic methods in the sensitivity analysis of the structural response of a Hypersonic Inflatable Aerodynamic Decelerator (HIAD). HIAD architectures are attractive for spacecraft deceleration because they are lightweight, store compactly, and utilize the atmosphere to decelerate a spacecraft during re-entry. However, designers are hesitant to include these inflatable approaches for large payloads or spacecraft because of the lack of flight validation. In the example presented here, the structural parameters of an existing HIAD model have been varied to illustrate the design approach utilizing uncertainty-based methods. Surrogate models have been used to reduce computational expense several orders of magnitude. The suitability of the design is based on assessing variation in the resulting cone angle. The acceptable cone angle variation would rely on the aerodynamic requirements.

  4. Multi-chain Markov chain Monte Carlo methods for computationally expensive models

    NASA Astrophysics Data System (ADS)

    Huang, M.; Ray, J.; Ren, H.; Hou, Z.; Bao, J.

    2017-12-01

    Markov chain Monte Carlo (MCMC) methods are used to infer model parameters from observational data. The parameters are inferred as probability densities, thus capturing estimation error due to sparsity of the data, and the shortcomings of the model. Multiple communicating chains executing the MCMC method have the potential to explore the parameter space better, and conceivably accelerate the convergence to the final distribution. We present results from tests conducted with the multi-chain method to show how the acceleration occurs i.e., for loose convergence tolerances, the multiple chains do not make much of a difference. The ensemble of chains also seems to have the ability to accelerate the convergence of a few chains that might start from suboptimal starting points. Finally, we show the performance of the chains in the estimation of O(10) parameters using computationally expensive forward models such as the Community Land Model, where the sampling burden is distributed over multiple chains.

  5. Expert judgments about RD&D and the future of nuclear energy.

    PubMed

    Anadón, Laura D; Bosetti, Valentina; Bunn, Matthew; Catenacci, Michela; Lee, Audrey

    2012-11-06

    Probabilistic estimates of the cost and performance of future nuclear energy systems under different scenarios of government research, development, and demonstration (RD&D) spending were obtained from 30 U.S. and 30 European nuclear technology experts. We used a novel elicitation approach which combined individual and group elicitation. With no change from current RD&D funding levels, experts on average expected current (Gen. III/III+) designs to be somewhat more expensive in 2030 than they were in 2010, and they expected the next generation of designs (Gen. IV) to be more expensive still as of 2030. Projected costs of proposed small modular reactors (SMRs) were similar to those of Gen. IV systems. The experts almost unanimously recommended large increases in government support for nuclear RD&D (generally 2-3 times current spending). The majority expected that such RD&D would have only a modest effect on cost, but would improve performance in other areas, such as safety, waste management, and uranium resource utilization. The U.S. and E.U. experts were in relative agreement regarding how government RD&D funds should be allocated, placing particular focus on very high temperature reactors, sodium-cooled fast reactors, fuels and materials, and fuel cycle technologies.

  6. Role of Pumped Storage Hydro Resources in Electricity Markets and System Operation: Preprint

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Ela, E.; Kirby, B.; Botterud, A.

    2013-05-01

    The most common form of utility- sized energy storage system is the pumped storage hydro system. Originally, these types of storage systems were economically viable simply because they displace more expensive generating units. However, over time, as those expensive units became more efficient and costs declined, pumped hydro storage units no longer have the operational edge. As a result, in the current electricity market environment, pumped storage hydro plants are struggling. To offset this phenomenon, certain market modifications should be addressed. This paper will introduce some of the challenges faced by pumped storage hydro plants in today's markets and purposemore » some solutions to those problems.« less

  7. Fluorescence photon migration techniques for the on-farm measurement of somatic cell count in fresh cow's milk

    NASA Astrophysics Data System (ADS)

    Khoo, Geoffrey; Kuennemeyer, Rainer; Claycomb, Rod W.

    2005-04-01

    Currently, the state of the art of mastitis detection in dairy cows is the laboratory-based measurement of somatic cell count (SCC), which is time consuming and expensive. Alternative, rapid, and reliable on-farm measurement methods are required for effective farm management. We have investigated whether fluorescence lifetime measurements can determine SCC in fresh, unprocessed milk. The method is based on the change in fluorescence lifetime of ethidium bromide when it binds to DNA from the somatic cells. Milk samples were obtained from a Fullwood Merlin Automated Milking System and analysed within a twenty-four hour period, over which the SCC does not change appreciably. For reference, the milk samples were also sent to a testing laboratory where the SCC was determined by traditional methods. The results show that we can quantify SCC using the fluorescence photon migration method from a lower bound of 4x105 cells mL-1 to an upper bound of 1 x 107 cells mL-1. The upper bound is due to the reference method used while the cause of the lower boundary is unknown, yet.

  8. An Efficient Statistical Method to Compute Molecular Collisional Rate Coefficients

    NASA Astrophysics Data System (ADS)

    Loreau, Jérôme; Lique, François; Faure, Alexandre

    2018-01-01

    Our knowledge about the “cold” universe often relies on molecular spectra. A general property of such spectra is that the energy level populations are rarely at local thermodynamic equilibrium. Solving the radiative transfer thus requires the availability of collisional rate coefficients with the main colliding partners over the temperature range ∼10–1000 K. These rate coefficients are notoriously difficult to measure and expensive to compute. In particular, very few reliable collisional data exist for inelastic collisions involving reactive radicals or ions. In this Letter, we explore the use of a fast quantum statistical method to determine molecular collisional excitation rate coefficients. The method is benchmarked against accurate (but costly) rigid-rotor close-coupling calculations. For collisions proceeding through the formation of a strongly bound complex, the method is found to be highly satisfactory up to room temperature. Its accuracy decreases with decreasing potential well depth and with increasing temperature, as expected. This new method opens the way to the determination of accurate inelastic collisional data involving key reactive species such as {{{H}}}3+, H2O+, and H3O+ for which exact quantum calculations are currently not feasible.

  9. Synthesis of Gold Nanoparticles Using Leaf Extract of Ziziphus zizyphus and their Antimicrobial Activity

    PubMed Central

    Akkam, Yazan; Al-Batayneh, Khalid M.; Abo Alrob, Osama; Alkilany, Alaaldin M.; Benamara, Mourad

    2018-01-01

    (1) Background: There is a growing need for the development of new methods for the synthesis of nanoparticles. The interest in such particles has raised concerns about the environmental safety of their production methods; (2) Objectives: The current methods of nanoparticle production are often expensive and employ chemicals that are potentially harmful to the environment, which calls for the development of “greener” protocols. Herein we describe the synthesis of gold nanoparticles (AuNPs) using plant extracts, which offers an alternative, efficient, inexpensive, and environmentally friendly method to produce well-defined geometries of nanoparticles; (3) Methods: The phytochemicals present in the aqueous leaf extract acted as an effective reducing agent. The generated AuNPs were characterized by Transmission electron microscopy (TEM), Scanning electron microscope (SEM), and Atomic Force microscopy (AFM), X-ray diffraction (XRD), UV-visible spectroscopy, energy dispersive X-ray (EDX), and thermogravimetric analyses (TGA); (4) Results and Conclusions: The prepared nanoparticles were found to be biocompatible and exhibited no antimicrobial or antifungal effect, deeming the particles safe for various applications in nanomedicine. TGA analysis revealed that biomolecules, which were present in the plant extract, capped the nanoparticles and acted as stabilizing agents. PMID:29562669

  10. Determination of Microalgal Lipid Content and Fatty Acid for Biofuel Production

    PubMed Central

    Chen, Zhipeng; Wang, Lingfeng

    2018-01-01

    Biofuels produced from microalgal biomass have received growing worldwide recognition as promising alternatives to conventional petroleum-derived fuels. Among the processes involved, the downstream refinement process for the extraction of lipids from biomass greatly influences the sustainability and efficiency of the entire biofuel system. This review summarizes and compares the current techniques for the extraction and measurement of microalgal lipids, including the gravimetric methods using organic solvents, CO2-based solvents, ionic liquids and switchable solvents, Nile red lipid visualization method, sulfo-phospho-vanillin method, and the thin-layer chromatography method. Each method has its own competitive advantages and disadvantages. For example, the organic solvents-based gravimetric method is mostly used and frequently employed as a reference standard to validate other methods, but it requires large amounts of samples and is time-consuming and expensive to recover solvents also with low selectivity towards desired products. The pretreatment approaches which aimed to disrupt cells and support subsequent lipid extraction through bead beating, microwave, ultrasonication, chemical methods, and enzymatic disruption are also introduced. Moreover, the principles and procedures for the production and quantification of fatty acids are finally described in detail, involving the preparation of fatty acid methyl esters and their quantification and composition analysis by gas chromatography.

  11. Advances in spectroscopic methods for quantifying soil carbon

    USDA-ARS?s Scientific Manuscript database

    The gold standard for soil C determination is combustion. However, this method requires expensive consumables, is limited to the determination of the total carbon and in the number of samples which can be processed (~100/d). With increased interest in soil C sequestration, faster methods are needed....

  12. Evaluation of a modified method to measure total starch in animal feeds

    USDA-ARS?s Scientific Manuscript database

    The AOAC method 996.11 has been recognized as an accurate, repeatable, and efficient method to measure total starch in animal feeds. However, analyzing starch using the AOAC method can be expensive and associated with technical challenges. The objective of this study was to determine if an alternati...

  13. The financial impact of the 'zero-markup policy for essential drugs' on patients in county hospitals in western rural China.

    PubMed

    Zhou, Zhongliang; Su, Yanfang; Campbell, Benjamin; Zhou, Zhiying; Gao, Jianmin; Yu, Qiang; Chen, Jiuhao; Pan, Yishan

    2015-01-01

    With a quasi-experimental design, this study aims to assess whether the Zero-markup Policy for Essential Drugs (ZPED) reduces the medical expense for patients at county hospitals, the major healthcare provider in rural China. Data from Ningshan county hospital and Zhenping county hospital, China, include 2014 outpatient records and 9239 inpatient records. Quantitative methods are employed to evaluate ZPED. Both hospital-data difference-in-differences and individual-data regressions are applied to analyze the data from inpatient and outpatient departments. In absolute terms, the total expense per visit reduced by 19.02 CNY (3.12 USD) for outpatient services and 399.6 CNY (65.60 USD) for inpatient services. In relative terms, the expense per visit was reduced by 11% for both outpatient and inpatient services. Due to the reduction of inpatient expense, the estimated reduction of outpatient visits is 2% among the general population and 3.39% among users of outpatient services. The drug expense per visit dropped by 27.20 CNY (4.47 USD) for outpatient services and 278.7 CNY (45.75 USD) for inpatient services. The proportion of drug expense out of total expense per visit dropped by 11.73 percentage points in outpatient visits and by 3.92 percentage points in inpatient visits. Implementation of ZPED is a benefit for patients in both absolute and relative terms. The absolute monetary reduction of the per-visit inpatient expense is 20 times of that in outpatient care. According to cross-price elasticity, the substitution between inpatient and outpatient due to the change in inpatient price is small. Furthermore, given that the relative reductions are the same for outpatient and inpatient visits, according to relative thinking theory, the incentive to utilize outpatient or inpatient care attributed to ZPED is equivalent, regardless of the 20-times price difference in absolute terms.

  14. 7 CFR 1210.603 - Instructions.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE WATERMELON RESEARCH AND PROMOTION... incurring advertising expense, to publicize the voting period, method of voting, eligibility requirements...

  15. Information security of power enterprises of North-Arctic region

    NASA Astrophysics Data System (ADS)

    Sushko, O. P.

    2018-05-01

    The role of information technologies in providing technological security for energy enterprises is a component of the economic security for the northern Arctic region in general. Applying instruments and methods of information protection modelling of the energy enterprises' business process in the northern Arctic region (such as Arkhenergo and Komienergo), the authors analysed and identified most frequent risks of information security. With the analytic hierarchy process based on weighting factor estimations, information risks of energy enterprises' technological processes were ranked. The economic estimation of the information security within an energy enterprise considers weighting factor-adjusted variables (risks). Investments in information security systems of energy enterprises in the northern Arctic region are related to necessary security elements installation; current operating expenses on business process protection systems become materialized economic damage.

  16. An introduction to minimally invasive therapy.

    PubMed

    Wickham, J E

    1993-01-01

    Minimally invasive therapy (MIT) has as its basic premise the reduction of iatrogenic trauma to the patient by surgeon, physician or radiologist. This approach must also imply that the therapeutic procedure succeeds in its aim of cure in a manner no less effective than is currently achievable by established methods of treatment. Acceptance of this principal has many identifiable sequelae, including profound changes in hospital design, increasingly expensive technological instrumentation, more sophisticated teaching and learning patterns, and a massive redirection of health care financial resources. These changes cannot be contemplated at leisure, because they are dynamically imperative and progressing with relentless rapidity, being directly driven by the consumer. It is vital that this shift in clinical emphasis should be appreciated so that future planning can be undertaken with some rationality.

  17. Fault Tree Analysis for an Inspection Robot in a Nuclear Power Plant

    NASA Astrophysics Data System (ADS)

    Ferguson, Thomas A.; Lu, Lixuan

    2017-09-01

    The life extension of current nuclear reactors has led to an increasing demand on inspection and maintenance of critical reactor components that are too expensive to replace. To reduce the exposure dosage to workers, robotics have become an attractive alternative as a preventative safety tool in nuclear power plants. It is crucial to understand the reliability of these robots in order to increase the veracity and confidence of their results. This study presents the Fault Tree (FT) analysis to a coolant outlet piper snake-arm inspection robot in a nuclear power plant. Fault trees were constructed for a qualitative analysis to determine the reliability of the robot. Insight on the applicability of fault tree methods for inspection robotics in the nuclear industry is gained through this investigation.

  18. Planning, execution and monitoring of physical rehabilitation therapies with a robotic architecture.

    PubMed

    González, José Carlos; Pulido, José Carlos; Fernández, Fernando; Suárez-Mejías, Cristina

    2015-01-01

    Traditional methods of rehabilitation require continuous attention of therapists during the therapy sessions. This is a hard and expensive task in terms of time and effort. In many cases, the therapeutic objectives cannot be achieved due to the overwork or the difficulty for therapists to plan accurate sessions according to the medical criteria. For this purpose, a wide range of studies is opened in order to research new ways of rehabilitation, as in the field of social robotics. This work presents the current state of the THERAPIST project. Our main goal is to develop a cognitive architecture which provides a robot with enough autonomy to carry out an upper-limb rehabilitation therapy for patients with physical impairments, such as Cerebral Palsy and Obstetric Brachial Plexus Palsy.

  19. Principles of thermoacoustic energy harvesting

    NASA Astrophysics Data System (ADS)

    Avent, A. W.; Bowen, C. R.

    2015-11-01

    Thermoacoustics exploit a temperature gradient to produce powerful acoustic pressure waves. The technology has a key role to play in energy harvesting systems. A time-line in the development of thermoacoustics is presented from its earliest recorded example in glass blowing through to the development of the Sondhauss and Rijke tubes to Stirling engines and pulse-tube cryo-cooling. The review sets the current literature in context, identifies key publications and promising areas of research. The fundamental principles of thermoacoustic phenomena are explained; design challenges and factors influencing efficiency are explored. Thermoacoustic processes involve complex multi-physical coupling and transient, highly non-linear relationships which are computationally expensive to model; appropriate numerical modelling techniques and options for analyses are presented. Potential methods of harvesting the energy in the acoustic waves are also examined.

  20. Sorption studies of nickel ions onto activated carbon

    NASA Astrophysics Data System (ADS)

    Joshi, Parth; Vyas, Meet; Patel, Chirag

    2018-05-01

    Activated porous carbons are made through pyrolysis and activation of carbonaceous natural as well as synthetic precursors. The use of low-cost activated carbon derived from azadirachta indica, an agricultural waste material, has been investigated as a replacement for the current expensive methods of removing nickel ions from wastewater. The temperature variation study showed that the nickel ions adsorption is endothermic and spontaneous with increased randomness at the solid solution interface. Significant effect on adsorption was observed on varying the pH of the nickel ion solutions. Therefore, this study revealed that azadirachta indica can serve as a good source of activated carbon with multiple and simultaneous metal ions removing potentials and may serve as a better replacement for commercial activated carbons in applications that warrant their use.

  1. Rapid and efficient gene delivery into the adult mouse brain via focal electroporation

    PubMed Central

    Nomura, Tadashi; Nishimura, Yusuke; Gotoh, Hitoshi; Ono, Katsuhiko

    2016-01-01

    In vivo gene delivery is required for studying the cellular and molecular mechanisms of various biological events. Virus-mediated gene transfer or generation of transgenic animals is widely used; however, these methods are time-consuming and expensive. Here we show an improved electroporation technique for acute gene delivery into the adult mouse brain. Using a syringe-based microelectrode, local DNA injection and the application of electric current can be performed simultaneously; this allows rapid and efficient gene transduction of adult non-neuronal cells. Combining this technique with various expression vectors that carry specific promoters resulted in targeted gene expression in astrocytic cells. Our results constitute a powerful strategy for the genetic manipulation of adult brains in a spatio-temporally controlled manner. PMID:27430903

  2. Emerging and established technologies to increase nitrogen use efficiency of cereals

    USDA-ARS?s Scientific Manuscript database

    Nitrogen (N) fertilizers are expensive inputs; additionally, loss of N increases costs, contributes to soil acidification, and causes off-site pollution of air, groundwater and waterways. This study reviews current knowledge about technologies for N fertilization with potential to increase N use eff...

  3. 78 FR 77169 - Proposed Collection; Comment Request

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-12-20

    ... program helps to ensure that requested data can be provided in the desired format, reporting burden (time... of collection requirements on respondents can be properly assessed. Currently, the Office of Workers... Expenses (LS-265). A copy of the proposed information collection request can be obtained by contacting the...

  4. 25 CFR 163.28 - Fire management measures.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... wildfire protection needs and extinguish forest or range fires on Indian land. No expenses for fighting a... are currently in use by public and private wildfire protection agencies adjacent to Indian... mutual aid in wildfire protection. This section does not apply to the rendering of emergency aid, or...

  5. 25 CFR 163.28 - Fire management measures.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... wildfire protection needs and extinguish forest or range fires on Indian land. No expenses for fighting a... are currently in use by public and private wildfire protection agencies adjacent to Indian... mutual aid in wildfire protection. This section does not apply to the rendering of emergency aid, or...

  6. 25 CFR 163.28 - Fire management measures.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... wildfire protection needs and extinguish forest or range fires on Indian land. No expenses for fighting a... are currently in use by public and private wildfire protection agencies adjacent to Indian... mutual aid in wildfire protection. This section does not apply to the rendering of emergency aid, or...

  7. 25 CFR 163.28 - Fire management measures.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... wildfire protection needs and extinguish forest or range fires on Indian land. No expenses for fighting a... are currently in use by public and private wildfire protection agencies adjacent to Indian... mutual aid in wildfire protection. This section does not apply to the rendering of emergency aid, or...

  8. 7 CFR 765.205 - Subordination of liens.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Subordination of liens. (a) Borrower application requirements. The borrower must submit the following, unless it... application for subordination form; (2) A current financial statement, including, in the case of an entity..., expenses, and debt repayment plan; and (6) Verification of all debts. (b) Real estate security. For loans...

  9. Fireflies in the Coalmine: Luciferase Technologies in Next-Generation Toxicity Testing

    EPA Science Inventory

    Whole-animal studies have been the mainstay of toxicity testing for decades. These approaches are too expensive and laborious to effectively characterize all of the chemicals currently in commercial use. In addition, there are social and ethical pressures to reduce, refine and re...

  10. 34 CFR 410.10 - What must an application contain?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... to the current and projected labor market needs in its geographic area, including the institution's... number of students to be served, enrollment trends, and economic factors that could affect the... statement must include information on allowable expenses listed in § 410.30. (12) Strategies and resources...

  11. Madison County energy conservation study : 2012-2013 survey of roadside vegetation.

    DOT National Transportation Integrated Search

    2014-02-01

    The current clear zone mowing frequency for I-10 in Madison County (FDOT Maintenance District 2) is 7 times per year. To conserve energy and reduce expenses associated with mowing, a pilot study was implemented in 2009, and continued in 2010-11 (Cont...

  12. Inexpensive News Sources.

    ERIC Educational Resources Information Center

    Briscoe, Ellen D.; Wall, Catherine

    1992-01-01

    Describes consumer or business-oriented online services that provide access to current news information and offers a less expensive alternative to standard online databases. Online clipping services are discussed, their costs are examined, and profiles of five services are compared: CompuServe, CompuServe as a gateway to IQuest, DELPHI, DIALCOM,…

  13. Relative Economy of Different Methods of Airplane Construction

    NASA Technical Reports Server (NTRS)

    Herrmann, H

    1931-01-01

    A comparison of the relative economy of airplane construction shows that monoplanes are cheaper than biplanes; that all-metal construction is much more expensive than mixed construction; that multi-engine airplanes are more expensive than single-engine types of the same carrying capacity and speed;that the cost of airplanes is materially reduced by increasing their size without increasing the number of engines. The greatest economy usually coincides with the best aerodynamic and static conditions and the cost is always increased by safety requirements.

  14. Comparison of Image Generation And Processing Techniques For 3D Reconstruction of The Human Skull

    DTIC Science & Technology

    2001-10-25

    inexpensive Microscribe (3D digitizer) with a standard widely used and expensive CT-Scan and/or MRI for 3D reconstruction of a human skull, which will be... Microscribe 3D digitizing unit and another one using the CT-Scans (2D cross-sections) obtained from a GE scanner. Both models were then subjected to stress...these methods are still elaborate, expensive and not readily accessible. Using the hand-held digitizer, the Microscribe , X, Y and Z coordinates

  15. Contrasting Methods for Measuring Evapotranspiration in Soybean

    USDA-ARS?s Scientific Manuscript database

    Crop scientists are often interested in canopy rather than leaf water fluxes. Canopy measurements are difficult to obtain because instrumentation is expensive, investigations require a high level of comprehension in micrometeorological methods, and treatment comparisons are usually limited. The obje...

  16. Financial contribution to global surgery: an analysis of 160 international charitable organisations.

    PubMed

    Gutnik, Lily A; Yamey, Gavin; Dare, Anna J; Ramos, Margarita S; Riviello, Robert; Meara, John G; Shrime, Mark G

    2015-04-27

    The non-profit and volunteer sector provides substantial contributions to global health. Within the field of surgery, this sector has made notable service contributions in low-income and middle-income countries (LMICs) where access to surgical care is poor. Little is known about financing and funding flows to surgical care in LMICs from both domestic and international sources. Because an estimated 55% of surgical care delivered in LMICs is via charitable organisations, understanding the financial contributions of this sector could provide valuable insight into estimating funding flows and understanding financing priorities in global surgery. Between June, and September, 2014, we searched public online databases of registered charitable organisations in five high-income nations (the USA, the UK, Canada, Australia, and New Zealand) to identify organisations committed exclusively to surgical needs. Based on availability, the most current 5 years (2007-13) of financial data per organisation were collected. For each charitable organisation, we identified the type of surgical services provided. We examined revenues and expenditures for each organisation. 160 organisations representing 15 different surgical specialties were included in the analysis. Total aggregated revenue over the years 2008-2013 was US$3·3 billion. Total aggregated expenses for all 160 organisations amounted to US$3·0 billion. 28 ophthalmology organisations accounted for 45% of revenue and 49% of expenses. 15 cleft lip and palate organisations totalled 26% of both revenue and expenses. 19 organisations providing a mix of diverse surgical specialty services amounted to 14% of revenue and 16% of expenses. The remaining 15% of funds represented 12 specialties and 98 organisations. The US accounted for 77·7% of revenue and 80·8% of expenses. The UK accounted for 11·0% of revenue and 11·91% of expenses. Canada accounted for 1·85% of revenue and 2·01% of expenses. Australia and New Zealand accounted for 4·94% of revenue and 5·29% of expenses. Charitable organisations addressing surgical conditions primarily focus on elective surgical care and cover a broad range of subspecialties. The largest funding flows from charitable organisations are directed at ophthalmology, followed by cleft lip and palate surgery. However, there is a clear need for improved, transparent tracking of funds to global surgery via charitable organisations. None. Copyright © 2015 Elsevier Ltd. All rights reserved.

  17. Apparatus for in situ prediction of the thermal conductivity of fiberglass batts using acoustic propagation constant

    NASA Astrophysics Data System (ADS)

    Tinianov, Brandon D.; Nakagawa, Masami; Muñoz, David R.

    2006-02-01

    This article describes a novel technique for the measurement of the thermal conductivity of low-density (12-18kg/m3) fiberglass insulation and other related fibrous insulation materials using a noninvasive acoustic apparatus. The experimental method is an extension of earlier acoustic methods based upon the evaluation of the propagation constant from the acoustic pressure transfer function across the test material. To accomplish this, an analytical model is employed that describes the behavior of sound waves at the outlet of a baffled waveguide. The model accounts for the behavior of the mixed impedance interface introduced by the test material. Current results show that the technique is stable for a broad range of absorber thicknesses and densities. Experimental results obtained in the laboratory show excellent correlation between the thermal conductivity and both the real and imaginary components of the propagation constant. Correlation of calculated propagation constant magnitude versus measured thermal conductivity gave an R2 of 0.94 for the bulk density range (12-18kg/m3) typical for manufactured fiberglass batt materials. As an improvement to earlier acoustic techniques, measurement is now possible in noisy manufacturing environments with a moving test material. Given the promise of such highly correlated measurements in a robust method, the acoustic technique is well suited to continuously measure the thermal conductivity of the material during its production, replacing current expensive off-line methods. Test cycle time is reduced from hours to seconds.

  18. Migration without migraines

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Lines, L.; Burton, A.; Lu, H.X.

    Accurate velocity models are a necessity for reliable migration results. Velocity analysis generally involves the use of methods such as normal moveout analysis (NMO), seismic traveltime tomography, or iterative prestack migration. These techniques can be effective, and each has its own advantage or disadvantage. Conventional NMO methods are relatively inexpensive but basically require simplifying assumptions about geology. Tomography is a more general method but requires traveltime interpretation of prestack data. Iterative prestack depth migration is very general but is computationally expensive. In some cases, there is the opportunity to estimate vertical velocities by use of well information. The well informationmore » can be used to optimize poststack migrations, thereby eliminating some of the time and expense of iterative prestack migration. The optimized poststack migration procedure defined here computes the velocity model which minimizes the depth differences between seismic images and formation depths at the well by using a least squares inversion method. The optimization methods described in this paper will hopefully produce ``migrations without migraines.``« less

  19. 26 CFR 1.174-3 - Treatment as expenses.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ...) of this section. If adopted, the method shall apply to all research and experimental expenditures... method is requested, and a description of the project or projects with respect to which research or... change to a different method of treating research or experimental expenditures shall be in writing and...

  20. Earbuds: A Method for Analyzing Nasality in the Field

    ERIC Educational Resources Information Center

    Stewart, Jesse; Kohlberger, Martin

    2017-01-01

    Existing methods for collecting and analyzing nasality data are problematic for linguistic fieldworkers: aerodynamic equipment can be expensive and difficult to transport, and acoustic analyses require large amounts of optimally-recorded data. In this paper, a highly mobile and low-cost method is proposed. By connecting low impedance earbuds into…

  1. A new composite consisting of electrosynthesized conducting polymers, graphene sheets and biosynthesized gold nanoparticles for biosensing acute lymphoblastic leukemia.

    PubMed

    Mazloum-Ardakani, Mohammad; Barazesh, Behnaz; Khoshroo, Alireza; Moshtaghiun, Mohammad; Sheikhha, Mohammad Hasan

    2018-06-01

    In this work we report the synthesis of a stable composite with excellent electrical properties, on the surface of a biosensor. Conductive polymers offer both high electrical conductivity and mechanical strength. Many reports have focused on synthesizing conductive polymers with the aid of high-cost enzymes. In the current work we introduce a novel electrochemical, one-step, facile and cost effective procedure for synthesizing poly (catechol), without using expensive enzymes. The poly (catechol) conductivity was enhanced by modification with graphene sheets and biosynthesized gold nanoparticles. Four different robust methods, DPV, EIS, CV and chronoamperometry, were used to monitor the biosensor modifications. The peak currents of the catechol (an electroactive probe) were linearly related to the logarithm of the concentrations of target DNA in the range 100.0 μM to 10.0 pM, with a detection limit of 1.0 pM for the DNA strand. The current work investigates a new, stable composite consisting of conductive polymers and nanoparticles, which was applied to the detection of acute lymphoblastic leukemia. Copyright © 2018 Elsevier B.V. All rights reserved.

  2. Simultaneous Perforation and Doping of Si Nanoparticles for Lithium-Ion Battery Anode.

    PubMed

    Lv, Guangxin; Zhu, Bin; Li, Xiuqiang; Chen, Chuanlu; Li, Jinlei; Jin, Yan; Hu, Xiaozhen; Zhu, Jia

    2017-12-27

    Silicon nanostructures have served as promising building blocks for various applications, such as lithium-ion batteries, thermoelectrics, and solar energy conversions. Particularly, control of porosity and doping is critical for fine-tuning the mechanical, optical, and electrical properties of these silicon nanostructures. However, perforation and doping are usually separated processes, both of which are complicated and expensive. Here, we demonstrate that the porous nano-Si particles with controllable dopant can be massively produced through a facile and scalable method, combining ball-milling and acid-etching. Nano-Si with porosity as high as 45.8% can be achieved with 9 orders of magnitude of conductivity changes compared to intrinsic silicon. As an example for demonstration, the obtained nano-Si particles with 45.8% porosity and 3.7 atom % doping can serve as a promising anode for lithium-ion batteries with 2000 mA h/g retained over 100 cycles at the current density of 0.5 C, excellent rate performance with 1600 mA h/g at the current density of 5 C, and a stable cycling performance of above 1500 mA h/g retained over 940 cycles at the current density of 1 C with carbon coating.

  3. [Comparison of three histometric methods for the comprehension of stimulating effects on the rat thyroid gland].

    PubMed

    Herrmann, F; Hambsch, K; Wolf, T; Rother, P; Müller, P

    1989-01-01

    There exist some histometric methods for the morphological quantification of different strongly stimulating effects on the thyroid gland induced by drugs and/or other chemical substances in dependence upon dose and duration of application. But in respect of technical and temporal expense and also diagnostic statement, there are considerable differences between these recording procedures. Therefore we examined the 3 mostly used methods synchronously (i.e. determination of thyroid epithelial cell height, nuclear volume in thyrocytes, and estimation of relative volume parts in the thyroid gland by the point counting method) by investigating the thyroid glands of methylthiouracil-(MTU)-stimulated rats and corresponding controls in order to compare the diagnostic value and temporal expense. The largest temporal expense was required in the nuclear volume determination, the smallest in the point-counting method. On principle, all 3 procedures allow the determination of hypertrophic alterations but only by help of the point-counting method, also hyperplastic changes are recognizable. By nuclear volume determination, we found significant differences between central and peripheral parts of the thyroid gland. Therefore, to avoid the subjective error, it will be necessary to measure a large number of nuclei in many planes of the gland. Also the determination of epithelial cell high reinforces the subjective error because of the heterological structure especially in unstimulated thyroid gland. If the number of counting points is exactly determined and, full of sense, limited, the point-counting method allows a nearly complete measuring of the whole object to be tested within an acceptable investigation time. In this way, the heterological structure of thyroid gland will be regarded, and comparability and reproducibility are guaranteed on an high level.

  4. Fast solver for large scale eddy current non-destructive evaluation problems

    NASA Astrophysics Data System (ADS)

    Lei, Naiguang

    Eddy current testing plays a very important role in non-destructive evaluations of conducting test samples. Based on Faraday's law, an alternating magnetic field source generates induced currents, called eddy currents, in an electrically conducting test specimen. The eddy currents generate induced magnetic fields that oppose the direction of the inducing magnetic field in accordance with Lenz's law. In the presence of discontinuities in material property or defects in the test specimen, the induced eddy current paths are perturbed and the associated magnetic fields can be detected by coils or magnetic field sensors, such as Hall elements or magneto-resistance sensors. Due to the complexity of the test specimen and the inspection environments, the availability of theoretical simulation models is extremely valuable for studying the basic field/flaw interactions in order to obtain a fuller understanding of non-destructive testing phenomena. Theoretical models of the forward problem are also useful for training and validation of automated defect detection systems. Theoretical models generate defect signatures that are expensive to replicate experimentally. In general, modelling methods can be classified into two categories: analytical and numerical. Although analytical approaches offer closed form solution, it is generally not possible to obtain largely due to the complex sample and defect geometries, especially in three-dimensional space. Numerical modelling has become popular with advances in computer technology and computational methods. However, due to the huge time consumption in the case of large scale problems, accelerations/fast solvers are needed to enhance numerical models. This dissertation describes a numerical simulation model for eddy current problems using finite element analysis. Validation of the accuracy of this model is demonstrated via comparison with experimental measurements of steam generator tube wall defects. These simulations generating two-dimension raster scan data typically takes one to two days on a dedicated eight-core PC. A novel direct integral solver for eddy current problems and GPU-based implementation is also investigated in this research to reduce the computational time.

  5. SemaTyP: a knowledge graph based literature mining method for drug discovery.

    PubMed

    Sang, Shengtian; Yang, Zhihao; Wang, Lei; Liu, Xiaoxia; Lin, Hongfei; Wang, Jian

    2018-05-30

    Drug discovery is the process through which potential new medicines are identified. High-throughput screening and computer-aided drug discovery/design are the two main drug discovery methods for now, which have successfully discovered a series of drugs. However, development of new drugs is still an extremely time-consuming and expensive process. Biomedical literature contains important clues for the identification of potential treatments. It could support experts in biomedicine on their way towards new discoveries. Here, we propose a biomedical knowledge graph-based drug discovery method called SemaTyP, which discovers candidate drugs for diseases by mining published biomedical literature. We first construct a biomedical knowledge graph with the relations extracted from biomedical abstracts, then a logistic regression model is trained by learning the semantic types of paths of known drug therapies' existing in the biomedical knowledge graph, finally the learned model is used to discover drug therapies for new diseases. The experimental results show that our method could not only effectively discover new drug therapies for new diseases, but also could provide the potential mechanism of action of the candidate drugs. In this paper we propose a novel knowledge graph based literature mining method for drug discovery. It could be a supplementary method for current drug discovery methods.

  6. An analysis code for the Rapid Engineering Estimation of Momentum and Energy Losses (REMEL)

    NASA Technical Reports Server (NTRS)

    Dechant, Lawrence J.

    1994-01-01

    Nonideal behavior has traditionally been modeled by defining efficiency (a comparison between actual and isentropic processes), and subsequent specification by empirical or heuristic methods. With the increasing complexity of aeropropulsion system designs, the reliability of these more traditional methods is uncertain. Computational fluid dynamics (CFD) and experimental methods can provide this information but are expensive in terms of human resources, cost, and time. This report discusses an alternative to empirical and CFD methods by applying classical analytical techniques and a simplified flow model to provide rapid engineering estimates of these losses based on steady, quasi-one-dimensional governing equations including viscous and heat transfer terms (estimated by Reynold's analogy). A preliminary verification of REMEL has been compared with full Navier-Stokes (FNS) and CFD boundary layer computations for several high-speed inlet and forebody designs. Current methods compare quite well with more complex method results and solutions compare very well with simple degenerate and asymptotic results such as Fanno flow, isentropic variable area flow, and a newly developed, combined variable area duct with friction flow solution. These solution comparisons may offer an alternative to transitional and CFD-intense methods for the rapid estimation of viscous and heat transfer losses in aeropropulsion systems.

  7. The enhancement of friction ridge detail on brass ammunition casings using cold patination fluid.

    PubMed

    James, Richard Michael; Altamimi, Mohamad Jamal

    2015-12-01

    Brass ammunition is commonly found at firearms related crime scenes. For this reason, many studies have focused on evidence that can be obtained from brass ammunition such as DNA, gunshot residue and fingerprints. Latent fingerprints on ammunition can provide good forensic evidence, however; fingerprint development on ammunition casings has proven to be difficult. A method using cold patination fluid is described as a potential tool to enhance friction ridge detail on brass ammunition casings. Current latent fingerprint development methods for brass ammunition have either failed to provide the necessary quality of friction ridge detail or can be very time consuming and require expensive equipment. In this study, the enhancement of fingerprints on live ammunition has been achieved with a good level of detail whilst the development on spent casings has to an extent also been possible. Development with cold patination fluid has proven to be a quick, simple and cost-effective method for fingerprint development on brass ammunition that can be easily implemented for routine police work. Crown Copyright © 2015. Published by Elsevier Ireland Ltd. All rights reserved.

  8. Improving the Repair Planning System for Mining Equipment on the Basis of Non-destructive Evaluation Data

    NASA Astrophysics Data System (ADS)

    Drygin, Michael; Kuryshkin, Nicholas

    2017-11-01

    The article tells about forming a new concept of scheduled preventive repair system of the equipment at coal mining enterprises, based on the use of modem non-destructive evaluation methods. The approach to the solution for this task is based on the system-oriented analysis of the regulatory documentation, non-destructive evaluation methods and means, experimental studies with compilation of statistics and subsequent grapho-analytical analysis. The main result of the work is a feasible explanation of using non-destructive evaluation methods within the current scheduled preventive repair system, their high efficiency and the potential of gradual transition to condition-based maintenance. In practice wide use of nondestructive evaluation means w;ill allow to reduce significantly the number of equipment failures and to repair only the nodes in pre-accident condition. Considering the import phase-out policy, the solution for this task will allow to adapt the SPR system to Russian market economy conditions and give the opportunity of commercial move by reducing the expenses for maintenance of Russian-made and imported equipment.

  9. Predicting β-Turns in Protein Using Kernel Logistic Regression

    PubMed Central

    Elbashir, Murtada Khalafallah; Sheng, Yu; Wang, Jianxin; Wu, FangXiang; Li, Min

    2013-01-01

    A β-turn is a secondary protein structure type that plays a significant role in protein configuration and function. On average 25% of amino acids in protein structures are located in β-turns. It is very important to develope an accurate and efficient method for β-turns prediction. Most of the current successful β-turns prediction methods use support vector machines (SVMs) or neural networks (NNs). The kernel logistic regression (KLR) is a powerful classification technique that has been applied successfully in many classification problems. However, it is often not found in β-turns classification, mainly because it is computationally expensive. In this paper, we used KLR to obtain sparse β-turns prediction in short evolution time. Secondary structure information and position-specific scoring matrices (PSSMs) are utilized as input features. We achieved Q total of 80.7% and MCC of 50% on BT426 dataset. These results show that KLR method with the right algorithm can yield performance equivalent to or even better than NNs and SVMs in β-turns prediction. In addition, KLR yields probabilistic outcome and has a well-defined extension to multiclass case. PMID:23509793

  10. Predicting β-turns in protein using kernel logistic regression.

    PubMed

    Elbashir, Murtada Khalafallah; Sheng, Yu; Wang, Jianxin; Wu, Fangxiang; Li, Min

    2013-01-01

    A β-turn is a secondary protein structure type that plays a significant role in protein configuration and function. On average 25% of amino acids in protein structures are located in β-turns. It is very important to develope an accurate and efficient method for β-turns prediction. Most of the current successful β-turns prediction methods use support vector machines (SVMs) or neural networks (NNs). The kernel logistic regression (KLR) is a powerful classification technique that has been applied successfully in many classification problems. However, it is often not found in β-turns classification, mainly because it is computationally expensive. In this paper, we used KLR to obtain sparse β-turns prediction in short evolution time. Secondary structure information and position-specific scoring matrices (PSSMs) are utilized as input features. We achieved Q total of 80.7% and MCC of 50% on BT426 dataset. These results show that KLR method with the right algorithm can yield performance equivalent to or even better than NNs and SVMs in β-turns prediction. In addition, KLR yields probabilistic outcome and has a well-defined extension to multiclass case.

  11. Low-cost Volumetric Ultrasound by Augmentation of 2D Systems: Design and Prototype.

    PubMed

    Herickhoff, Carl D; Morgan, Matthew R; Broder, Joshua S; Dahl, Jeremy J

    2018-01-01

    Conventional two-dimensional (2D) ultrasound imaging is a powerful diagnostic tool in the hands of an experienced user, yet 2D ultrasound remains clinically underutilized and inherently incomplete, with output being very operator dependent. Volumetric ultrasound systems can more fully capture a three-dimensional (3D) region of interest, but current 3D systems require specialized transducers, are prohibitively expensive for many clinical departments, and do not register image orientation with respect to the patient; these systems are designed to provide improved workflow rather than operator independence. This work investigates whether it is possible to add volumetric 3D imaging capability to existing 2D ultrasound systems at minimal cost, providing a practical means of reducing operator dependence in ultrasound. In this paper, we present a low-cost method to make 2D ultrasound systems capable of quality volumetric image acquisition: we present the general system design and image acquisition method, including the use of a probe-mounted orientation sensor, a simple probe fixture prototype, and an offline volume reconstruction technique. We demonstrate initial results of the method, implemented using a Verasonics Vantage research scanner.

  12. Crystallographic Lattice Boltzmann Method

    PubMed Central

    Namburi, Manjusha; Krithivasan, Siddharth; Ansumali, Santosh

    2016-01-01

    Current approaches to Direct Numerical Simulation (DNS) are computationally quite expensive for most realistic scientific and engineering applications of Fluid Dynamics such as automobiles or atmospheric flows. The Lattice Boltzmann Method (LBM), with its simplified kinetic descriptions, has emerged as an important tool for simulating hydrodynamics. In a heterogeneous computing environment, it is often preferred due to its flexibility and better parallel scaling. However, direct simulation of realistic applications, without the use of turbulence models, remains a distant dream even with highly efficient methods such as LBM. In LBM, a fictitious lattice with suitable isotropy in the velocity space is considered to recover Navier-Stokes hydrodynamics in macroscopic limit. The same lattice is mapped onto a cartesian grid for spatial discretization of the kinetic equation. In this paper, we present an inverted argument of the LBM, by making spatial discretization as the central theme. We argue that the optimal spatial discretization for LBM is a Body Centered Cubic (BCC) arrangement of grid points. We illustrate an order-of-magnitude gain in efficiency for LBM and thus a significant progress towards feasibility of DNS for realistic flows. PMID:27251098

  13. Estimating Seebeck Coefficient of a p-Type High Temperature Thermoelectric Material Using Bee Algorithm Multi-layer Perception

    NASA Astrophysics Data System (ADS)

    Uysal, Fatih; Kilinc, Enes; Kurt, Huseyin; Celik, Erdal; Dugenci, Muharrem; Sagiroglu, Selami

    2017-08-01

    Thermoelectric generators (TEGs) convert heat into electrical energy. These energy-conversion systems do not involve any moving parts and are made of thermoelectric (TE) elements connected electrically in a series and thermally in parallel; however, they are currently not suitable for use in regular operations due to their low efficiency levels. In order to produce high-efficiency TEGs, there is a need for highly heat-resistant thermoelectric materials (TEMs) with an improved figure of merit ( ZT). Production and test methods used for TEMs today are highly expensive. This study attempts to estimate the Seebeck coefficient of TEMs by using the values of existing materials in the literature. The estimation is made within an artificial neural network (ANN) based on the amount of doping and production methods. Results of the estimations show that the Seebeck coefficient can approximate the real values with an average accuracy of 94.4%. In addition, ANN has detected that any change in production methods is followed by a change in the Seebeck coefficient.

  14. Underwater Inherent Optical Properties Estimation Using a Depth Aided Deep Neural Network.

    PubMed

    Yu, Zhibin; Wang, Yubo; Zheng, Bing; Zheng, Haiyong; Wang, Nan; Gu, Zhaorui

    2017-01-01

    Underwater inherent optical properties (IOPs) are the fundamental clues to many research fields such as marine optics, marine biology, and underwater vision. Currently, beam transmissometers and optical sensors are considered as the ideal IOPs measuring methods. But these methods are inflexible and expensive to be deployed. To overcome this problem, we aim to develop a novel measuring method using only a single underwater image with the help of deep artificial neural network. The power of artificial neural network has been proved in image processing and computer vision fields with deep learning technology. However, image-based IOPs estimation is a quite different and challenging task. Unlike the traditional applications such as image classification or localization, IOP estimation looks at the transparency of the water between the camera and the target objects to estimate multiple optical properties simultaneously. In this paper, we propose a novel Depth Aided (DA) deep neural network structure for IOPs estimation based on a single RGB image that is even noisy. The imaging depth information is considered as an aided input to help our model make better decision.

  15. Ultra-High Rate Measurements of Spent Fuel Gamma-Ray Emissions

    NASA Astrophysics Data System (ADS)

    Rodriguez, Douglas; Vandevender, Brent; Wood, Lynn; Glasgow, Brian; Taubman, Matthew; Wright, Michael; Dion, Michael; Pitts, Karl; Runkle, Robert; Campbell, Luke; Fast, James

    2014-03-01

    Presently there are over 200,000 irradiated spent nuclear fuel (SNF) assemblies in the world, each containing a concerning amount of weapons-usable material. Both facility operators and safeguards inspectors want to improve composition determination. Current measurements are expensive and difficult so new methods are developed through models. Passive measurements are limited since a few specific decay products and the associated down-scatter overwhelm the gamma rays of interest. Active interrogation methods produce gamma rays beyond 3 MeV, minimizing the impact of the passive emissions that drop off sharply above this energy. New devices like the Ultra-High Rate Germanium (UHRGe) detector are being developed to advance these novel measurement methods. Designed for reasonable resolution at 106 s-1 output rates (compared to ~ 1 - 10 e 3 s-1 standards), SNF samples were directly measured using UHRGe and compared to models. Model verification further enables using Los Alamos National Laboratory SNF assembly models, developed under the Next Generation Safeguards Initiative, to determine emission and signal expectations. Measurement results and future application requirements for UHRGe will be discussed.

  16. Integrative analysis with ChIP-seq advances the limits of transcript quantification from RNA-seq

    PubMed Central

    Liu, Peng; Sanalkumar, Rajendran; Bresnick, Emery H.; Keleş, Sündüz; Dewey, Colin N.

    2016-01-01

    RNA-seq is currently the technology of choice for global measurement of transcript abundances in cells. Despite its successes, isoform-level quantification remains difficult because short RNA-seq reads are often compatible with multiple alternatively spliced isoforms. Existing methods rely heavily on uniquely mapping reads, which are not available for numerous isoforms that lack regions of unique sequence. To improve quantification accuracy in such difficult cases, we developed a novel computational method, prior-enhanced RSEM (pRSEM), which uses a complementary data type in addition to RNA-seq data. We found that ChIP-seq data of RNA polymerase II and histone modifications were particularly informative in this approach. In qRT-PCR validations, pRSEM was shown to be superior than competing methods in estimating relative isoform abundances within or across conditions. Data-driven simulations suggested that pRSEM has a greatly decreased false-positive rate at the expense of a small increase in false-negative rate. In aggregate, our study demonstrates that pRSEM transforms existing capacity to precisely estimate transcript abundances, especially at the isoform level. PMID:27405803

  17. Application of Electrokinetic Stabilisation (EKS) Method for Soft Soil: A Review

    NASA Astrophysics Data System (ADS)

    Azhar, ATS; Azim, MAM; Syakeera, NN; Jefferson, IF; Rogers, CDF

    2017-08-01

    Soil properties such as low shear strength, excessive compression, collapsing behavior, high swell potential are some of the undesirable properties of soils in geotechnical engineering and those properties would cause severe distress to the structures. To solve these, an innovative stabilization of Electrokinetic (EKS) has been introduced. Electrokinetic is an applicable technique to transport charged particles and fluid in an electric potential. The EKS demonstrates changes in soil pH due to electrolysis reactions, water flow between the electrodes and migration of ions towards the cathode. This treatment has proven its efficiency in consolidating organic, peat and clayey silt as well as less expensive than other methods. Otherwise, this method also gives advantage by not disturbing site. The primary objective of this review is to discuss the application of electrokinetic and to investigate the current knowledge of electrokinetic in geotechnical application through a literature search and review, including consideration of certain aspects related to the soft soil application that may be relevant to the future study and at the same time addressing some key issues and their implications on soil behaviors.

  18. Calculation of nuclear spin-spin coupling constants using frozen density embedding

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Götz, Andreas W., E-mail: agoetz@sdsc.edu; Autschbach, Jochen; Visscher, Lucas, E-mail: visscher@chem.vu.nl

    2014-03-14

    We present a method for a subsystem-based calculation of indirect nuclear spin-spin coupling tensors within the framework of current-spin-density-functional theory. Our approach is based on the frozen-density embedding scheme within density-functional theory and extends a previously reported subsystem-based approach for the calculation of nuclear magnetic resonance shielding tensors to magnetic fields which couple not only to orbital but also spin degrees of freedom. This leads to a formulation in which the electron density, the induced paramagnetic current, and the induced spin-magnetization density are calculated separately for the individual subsystems. This is particularly useful for the inclusion of environmental effects inmore » the calculation of nuclear spin-spin coupling constants. Neglecting the induced paramagnetic current and spin-magnetization density in the environment due to the magnetic moments of the coupled nuclei leads to a very efficient method in which the computationally expensive response calculation has to be performed only for the subsystem of interest. We show that this approach leads to very good results for the calculation of solvent-induced shifts of nuclear spin-spin coupling constants in hydrogen-bonded systems. Also for systems with stronger interactions, frozen-density embedding performs remarkably well, given the approximate nature of currently available functionals for the non-additive kinetic energy. As an example we show results for methylmercury halides which exhibit an exceptionally large shift of the one-bond coupling constants between {sup 199}Hg and {sup 13}C upon coordination of dimethylsulfoxide solvent molecules.« less

  19. Geometry and Grid Modeling for Numerical Simulation

    DTIC Science & Technology

    2005-06-01

    which makes them particularly vexing to beginners . In addition, they are expensive in terms of memory requirements and compile times. 3.1.4 TSTT The...F77, Python , or Fortran90 (beta). It supports drivers written in C, C++, F77, Python , Java or Fortran90 (beta). It is supported currently on

  20. Diet improvement for western corn rootworm (Coleoptera: Chrysomelidae) larvae

    USDA-ARS?s Scientific Manuscript database

    The western corn rootworm (WCR), Diabrotica virgifera virgifera LeConte, is the most serious insect pest of corn (Zea mays L.) in the United States and parts of Europe, and arguably the world’s most expensive pest to control. Several diet formulations are currently used by industry and researchers t...

  1. 18 CFR 367.83 - Training costs.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 18 Conservation of Power and Water Resources 1 2011-04-01 2011-04-01 false Training costs. 367.83... Expense Instructions § 367.83 Training costs. When it is necessary that employees be trained to... functional accounts currently as they are incurred. However, when the training costs involved relate to...

  2. The EPA ToxCast Program: Developing Predictive Bioactivity Signatures for Chemicals

    EPA Science Inventory

    There are tens of thousands of chemicals used in the environment for which little or no toxicology information is known. Current testing paradigms that use large numbers of animals to perform in vivo toxicology are too slow and expensive to apply to this large number of chemicals...

  3. 17 CFR 270.3a-8 - Certain research and development companies.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... and development expenses as defined in FASB Statement of Financial Accounting Standards No. 2, Accounting for Research and Development Costs, as currently in effect or as it may be subsequently revised..., except that the issuer shall consolidate its financial statements with the financial statements of any...

  4. COST MODEL FOR LARGE URBAN SCHOOLS.

    ERIC Educational Resources Information Center

    O'BRIEN, RICHARD J.

    THIS DOCUMENT CONTAINS A COST SUBMODEL OF AN URBAN EDUCATIONAL SYSTEM. THIS MODEL REQUIRES THAT PUPIL POPULATION AND PROPOSED SCHOOL BUILDING ARE KNOWN. THE COST ELEMENTS ARE--(1) CONSTRUCTION COSTS OF NEW PLANTS, (2) ACQUISITION AND DEVELOPMENT COSTS OF BUILDING SITES, (3) CURRENT OPERATING EXPENSES OF THE PROPOSED SCHOOL, (4) PUPIL…

  5. WITHOUT A CHANGE OF DIRECTION, WE'LL GET WHERE WE'RE GOING: WRITING A FUTURE FOR WILD SALMON

    EPA Science Inventory

    Many experts have concluded that wild salmon recovery efforts in western North America (especially California, Oregon, Washington, Idaho, and southern British Columbia), as earnest, expensive, and socially disruptive as they currently are, do not appear likely to sustain biologic...

  6. Cytotoxicity of ethanolic extracts of Artemisia annua to Molt-4 human leukemia cells

    USDA-ARS?s Scientific Manuscript database

    Cancer is the second cause of death in the United States, and current treatment is expensive and kills also healthy cells. Affordable alternatives that kill only cancer cells are needed. Artemisinin, extracted from the Artemisia annua, has potent anticancer activity and low toxicity to normal cell...

  7. Contract Education: A Background Paper.

    ERIC Educational Resources Information Center

    California Community Colleges, Sacramento. Academic Senate.

    Today contract education is generally thought of as a program or course for which an employer is paying the full cost of instruction for customized training. Contract education can help faculty remain current, encourage industry to make equipment available to the college that might otherwise be too expensive, and provide employment opportunities…

  8. Semantic Search of Web Services

    ERIC Educational Resources Information Center

    Hao, Ke

    2013-01-01

    This dissertation addresses semantic search of Web services using natural language processing. We first survey various existing approaches, focusing on the fact that the expensive costs of current semantic annotation frameworks result in limited use of semantic search for large scale applications. We then propose a vector space model based service…

  9. Evaluation of twig pre-harvest temperature for effective cryopreservation of Vaccinium dormant buds

    USDA-ARS?s Scientific Manuscript database

    Cryopreservation of plant material by dormant buds is less expensive than using shoot tips; however currently, dormant buds are used only for preservation of selected temperate tree and shrub species. Using dormant buds could be an efficient strategy for long-term preservation of blueberry (Vacciniu...

  10. 77 FR 10804 - Submission for OMB Review; Comment Request

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-02-23

    .... Title: Electronic Federal Tax Payment System (EFTPS). Forms: 9779, 9779(SP), 9783, 9783(SP), 9787, 9787... a currently approved collection. Title: Orphan Drug Credit. Form: 8820. Abstract: Filers use this form to elect to claim the orphan drug credit, which is 50% of the qualified clinical testing expenses...

  11. The Tax Treatment of Training and Educational Expenses. Background Paper No. 14.

    ERIC Educational Resources Information Center

    Quigley, John M.; Smolensky, Eugene

    For those students incurring direct educational expenditures that are high enough, the current personal income tax will discourage investment in human capital, assuming tax rates are essentially proportional over the relevant range. In all probability, however, any distortion between investment in human and physical capital is quantitatively…

  12. Rolled cover crop mulches for organic corn and soybean production

    USDA-ARS?s Scientific Manuscript database

    Interest in cover crop mulches has increased out of both economic and soil conservation concerns. The number of tractor passes required to produce corn and a soybean organically is expensive and logistically challenging. Farmers currently use blind cultivators, such as a rotary hoe or flex-tine harr...

  13. A SHORT-TERM REPRODUCTIVE TEST WITH THE FATHEAD MINNOW (PIMEPHALES PROMELAS)

    EPA Science Inventory

    Due to the time and expense associated with full life-cycle testing, most current toxicity tests with fish do not explicity consider reproductive output as an endpoint but, rather, focus on early life-stage survival and development. However, there are classes of chemicals that co...

  14. Production of Microchips from Polystyrene Plates

    ERIC Educational Resources Information Center

    Pace, Sarah Lindsey

    2009-01-01

    Currently manufactured microchips are expensive to make, require specialized equipment, and leave a large environmental footprint. To counter this, an alternative procedure that is cheaper and leaves a smaller environmental footprint should be made. The goal of this research project is to develop a process that creates microchips from polystyrene…

  15. Common Sense Wordworking III: Desktop Publishing and Desktop Typesetting.

    ERIC Educational Resources Information Center

    Crawford, Walt

    1987-01-01

    Describes current desktop publishing packages available for microcomputers and discusses the disadvantages, especially in cost, for most personal computer users. Also described is a less expensive alternative technology--desktop typesetting--which meets the requirements of users who do not need elaborate techniques for combining text and graphics.…

  16. 75 FR 51395 - AmeriCorps National Service Program

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-08-20

    ... members, nearly 500,000 Senior Corps volunteers, 1.5 million Learn and Serve America students, and three... eligible for the payment of accrued interest on qualified student loans; Amends the amount of a full-time... education awards: to repay qualified student loans, to pay for current educational expenses at an...

  17. 14 CFR 14 - Objective Classification-Nonoperating Income and Expense

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... gains and losses. Record here gains and losses from transactions involving currency translations resulting from nonroutine abnormal changes in rates of foreign exchange and gains or losses which arise from... functions. 87.0Equity in Income of Investor Controlled Companies. Record here the equity in the current...

  18. EVALUATING THE POTENTIAL EFFICACY OF THREE ANTIFUNGAL SEALANTS OF DUCT LINER AND GALVANIZED STEEL AS USED IN HVAC SYSTEMS

    EPA Science Inventory

    Current recommendations for remediation of fiberglass duct materials contaminated with fungi specify complete removal, which can be extremely expensive, but in-place duct cleaning may not provide adequate protection from regrowth of fungal contamination. Therefore, a common pract...

  19. New Applicators for Weed Control in Forest Nurseries and Plantations

    Treesearch

    J. M. Chandler; T. H. Filer

    1981-01-01

    Until recently chemical weed control technology in forestry nurseries was limited primarily to soil fumigation, a very expensive and laborous weed control procedure. Herbicides for preemergence application have been registered and are currently being used to control many annual weeds. Removal of perennial weeds such as nutsedge, (Cyperus spp.)...

  20. Simulation of Longitudinal Exposure Data with Variance-Covariance Structures Based on Mixed Models

    EPA Science Inventory

    Longitudinal data are important in exposure and risk assessments, especially for pollutants with long half-lives in the human body and where chronic exposures to current levels in the environment raise concerns for human health effects. It is usually difficult and expensive to ob...

  1. 76 FR 77474 - Submission for OMB Review; Comment Request

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-12-13

    ..., Office of Management and Budget (OMB), [email protected] or fax (202) 395-5806 and to... it displays a currently valid OMB control number. Food and Nutrition Service Title: 7 CFR part 235... Food and Nutrition Service (FNS) is accountable for State Administrative Expense (SAE) funds by fiscal...

  2. 7 CFR 273.10 - Determining household eligibility and benefit levels.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... insurance coverage, the household shall have the nonreimbursable portion of the medical expense considered... information about the recipient's medical condition, public or private insurance coverage, and current... timely apply for recertification was due to an error of the State agency and therefore there was a break...

  3. Queering Transformation in Higher Education

    ERIC Educational Resources Information Center

    Msibi, Thabo

    2013-01-01

    Transformation in higher education has tended to focus on race and sex, at the expense of other forms of discrimination. This article addresses the silencing of "queer" issues in higher education. Using queer theory as a framework, and drawing on current literature, popular media reports, two personal critical incidents and a project…

  4. 75 FR 56663 - Agency Information Collection (Quarterly Report of State Approving Agency Activities); Activity...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-09-16

    ... INFORMATION CONTACT: Denise McLamb, Enterprise Records Service (005R1B), Department of Veterans Affairs, 810... a currently approved collection. Abstract: VA reimburses State Approving Agencies (SAAs) for expenses incurred in the approval and supervision of education and training programs. SAAs are required to...

  5. 7 CFR 1770.15 - Supplementary accounts required of all borrowers.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... Switching—Circuit. 2212.2 2212.2 Digital Electronic Switching—Packet. 2230.11 Central Office Transmission... Retirement Work in Progress. Current Liabilities 2232.1 2232.1 Circuit Equipment—Electronic. 2232.2 2232.2... Expense—Circuit. 6212.2 6212.2 Digital Electronic Switching Expense—Packet. 6230.11 Radio Systems Expense...

  6. 7 CFR 1770.15 - Supplementary accounts required of all borrowers.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... Switching—Circuit. 2212.2 2212.2 Digital Electronic Switching—Packet. 2230.11 Central Office Transmission... Retirement Work in Progress. Current Liabilities 2232.1 2232.1 Circuit Equipment—Electronic. 2232.2 2232.2... Expense—Circuit. 6212.2 6212.2 Digital Electronic Switching Expense—Packet. 6230.11 Radio Systems Expense...

  7. 7 CFR 1770.15 - Supplementary accounts required of all borrowers.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... Switching—Circuit. 2212.2 2212.2 Digital Electronic Switching—Packet. 2230.11 Central Office Transmission... Retirement Work in Progress. Current Liabilities 2232.1 2232.1 Circuit Equipment—Electronic. 2232.2 2232.2... Expense—Circuit. 6212.2 6212.2 Digital Electronic Switching Expense—Packet. 6230.11 Radio Systems Expense...

  8. Low Current Magnet

    NASA Technical Reports Server (NTRS)

    1992-01-01

    Because Goddard Space Flight Center needed a way to cool sensors aboard the AXAF, a low current superconducting magnet was developed under contract by Cryomagnetics, Inc. The magnet, now commercially available, reduced the rate of helium consumption, extending the lifetime of the AXAF's x-ray spectrometer. On Earth, it offers a way to reduce operating costs through smaller, less expensive power supplies and reduced use of coolant. The magnet has particular advantages for MRI systems, as it is safer and has lower maintenance requirements.

  9. Variability of Mercury Content in Coal Matter From Coal Seams of The Upper Silesia Coal Basin

    NASA Astrophysics Data System (ADS)

    Wierzchowski, Krzysztof; Chećko, Jarosław; Pyka, Ireneusz

    2017-12-01

    The process of identifying and documenting the quality parameters of coal, as well as the conditions of coal deposition in the seam, is multi-stage and extremely expensive. The taking and analyzing of seam samples is the method of assessment of the quality and quantity parameters of coals in deep mines. Depending on the method of sampling, it offers quite precise assessment of the quality parameters of potential commercial coals. The main kind of seam samples under consideration are so-called "documentary seam samples", which exclude dirt bands and other seam contaminants. Mercury content in coal matter from the currently accessible and exploited coal seams of the Upper Silesian Coal Basin (USCB) was assessed. It was noted that the mercury content in coal seams decreases with the age of the seam and, to a lesser extent, seam deposition depth. Maps of the variation of mercury content in selected lithostratigraphic units (layers) of the Upper Silesian Coal Basin have been created.

  10. Accurate first-principles structures and energies of diversely bonded systems from an efficient density functional

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Sun, Jianwei; Remsing, Richard C.; Zhang, Yubo

    2016-06-13

    One atom or molecule binds to another through various types of bond, the strengths of which range from several meV to several eV. Although some computational methods can provide accurate descriptions of all bond types, those methods are not efficient enough for many studies (for example, large systems, ab initio molecular dynamics and high-throughput searches for functional materials). Here, we show that the recently developed non-empirical strongly constrained and appropriately normed (SCAN) meta-generalized gradient approximation (meta-GGA) within the density functional theory framework predicts accurate geometries and energies of diversely bonded molecules and materials (including covalent, metallic, ionic, hydrogen and vanmore » der Waals bonds). This represents a significant improvement at comparable efficiency over its predecessors, the GGAs that currently dominate materials computation. Often, SCAN matches or improves on the accuracy of a computationally expensive hybrid functional, at almost-GGA cost. SCAN is therefore expected to have a broad impact on chemistry and materials science.« less

  11. Convolutional networks for vehicle track segmentation

    NASA Astrophysics Data System (ADS)

    Quach, Tu-Thach

    2017-10-01

    Existing methods to detect vehicle tracks in coherent change detection images, a product of combining two synthetic aperture radar images taken at different times of the same scene, rely on simple and fast models to label track pixels. These models, however, are unable to capture natural track features, such as continuity and parallelism. More powerful but computationally expensive models can be used in offline settings. We present an approach that uses dilated convolutional networks consisting of a series of 3×3 convolutions to segment vehicle tracks. The design of our networks considers the fact that remote sensing applications tend to operate in low power and have limited training data. As a result, we aim for small and efficient networks that can be trained end-to-end to learn natural track features entirely from limited training data. We demonstrate that our six-layer network, trained on just 90 images, is computationally efficient and improves the F-score on a standard dataset to 0.992, up from 0.959 obtained by the current state-of-the-art method.

  12. Accurate first-principles structures and energies of diversely bonded systems from an efficient density functional.

    PubMed

    Sun, Jianwei; Remsing, Richard C; Zhang, Yubo; Sun, Zhaoru; Ruzsinszky, Adrienn; Peng, Haowei; Yang, Zenghui; Paul, Arpita; Waghmare, Umesh; Wu, Xifan; Klein, Michael L; Perdew, John P

    2016-09-01

    One atom or molecule binds to another through various types of bond, the strengths of which range from several meV to several eV. Although some computational methods can provide accurate descriptions of all bond types, those methods are not efficient enough for many studies (for example, large systems, ab initio molecular dynamics and high-throughput searches for functional materials). Here, we show that the recently developed non-empirical strongly constrained and appropriately normed (SCAN) meta-generalized gradient approximation (meta-GGA) within the density functional theory framework predicts accurate geometries and energies of diversely bonded molecules and materials (including covalent, metallic, ionic, hydrogen and van der Waals bonds). This represents a significant improvement at comparable efficiency over its predecessors, the GGAs that currently dominate materials computation. Often, SCAN matches or improves on the accuracy of a computationally expensive hybrid functional, at almost-GGA cost. SCAN is therefore expected to have a broad impact on chemistry and materials science.

  13. Planetary Protection Considerations For Exomars Meteorological Instrumentation.

    NASA Astrophysics Data System (ADS)

    Camilletti, Adam

    2007-10-01

    Planetary protection requirements for Oxford University's contribution to the upcoming ESA ExoMars mission are discussed and the current methods being used to fulfil these requirements are detailed and reviewed. Oxford University is supplying temperature and wind sensors to the mission and since these will be exposed to the Martian environment there is a requirement that they are sterilised to stringent COSPAR standards adhered to by ESA. Typically dry heat microbial reduction (DHMR) is used to reduce spacecraft bioburden but the high temperatures involved are not compatible with the some hardware elements. Alternative, low-temperature sterilisation methods are reviewed and their applicability to spacecraft hardware discussed. The use of a commercially available, bench-top endotoxin tester in planetary protection is also discussed and data from preliminary tests performed at Oxford are presented. These devices, which utilise the immune response of horseshoe crabs to the presence of endotoxin, have the potential to reduce the time taken to determine bioburden by removing the need for conventional assaying -a lengthy and sometimes expensive process.

  14. Optofluidic fabrication for 3D-shaped particles

    NASA Astrophysics Data System (ADS)

    Paulsen, Kevin S.; di Carlo, Dino; Chung, Aram J.

    2015-04-01

    Complex three-dimensional (3D)-shaped particles could play unique roles in biotechnology, structural mechanics and self-assembly. Current methods of fabricating 3D-shaped particles such as 3D printing, injection moulding or photolithography are limited because of low-resolution, low-throughput or complicated/expensive procedures. Here, we present a novel method called optofluidic fabrication for the generation of complex 3D-shaped polymer particles based on two coupled processes: inertial flow shaping and ultraviolet (UV) light polymerization. Pillars within fluidic platforms are used to deterministically deform photosensitive precursor fluid streams. The channels are then illuminated with patterned UV light to polymerize the photosensitive fluid, creating particles with multi-scale 3D geometries. The fundamental advantages of optofluidic fabrication include high-resolution, multi-scalability, dynamic tunability, simple operation and great potential for bulk fabrication with full automation. Through different combinations of pillar configurations, flow rates and UV light patterns, an infinite set of 3D-shaped particles is available, and a variety are demonstrated.

  15. Numerical modeling of turbulent swirling flow in a multi-inlet vortex nanoprecipitation reactor using dynamic DDES

    NASA Astrophysics Data System (ADS)

    Hill, James C.; Liu, Zhenping; Fox, Rodney O.; Passalacqua, Alberto; Olsen, Michael G.

    2015-11-01

    The multi-inlet vortex reactor (MIVR) has been developed to provide a platform for rapid mixing in the application of flash nanoprecipitation (FNP) for manufacturing functional nanoparticles. Unfortunately, commonly used RANS methods are unable to accurately model this complex swirling flow. Large eddy simulations have also been problematic, as expensive fine grids to accurately model the flow are required. These dilemmas led to the strategy of applying a Delayed Detached Eddy Simulation (DDES) method to the vortex reactor. In the current work, the turbulent swirling flow inside a scaled-up MIVR has been investigated by using a dynamic DDES model. In the DDES model, the eddy viscosity has a form similar to the Smagorinsky sub-grid viscosity in LES and allows the implementation of a dynamic procedure to determine its coefficient. The complex recirculating back flow near the reactor center has been successfully captured by using this dynamic DDES model. Moreover, the simulation results are found to agree with experimental data for mean velocity and Reynolds stresses.

  16. Patients' annual income adequacy, insurance premiums and out-of-pocket expenses related to heart failure care.

    PubMed

    Piamjariyakul, Ubolrat; Yadrich, Donna Macan; Russell, Christy; Myer, Jane; Prinyarux, Chanawee; Vacek, James L; Ellerbeck, Edward F; Smith, Carol E

    2014-01-01

    To (1) identify the amount patients spend for insurance premiums, co-payments, deductibles, and other out-of-pocket costs related to HF and chronic health care services and estimate their annual non-reimbursed and out-of-pocket costs; and (2) identify patients' concerns about nonreimbursed and out-of-pocket expenses. HF is one of the most expensive illnesses for our society with multiple health services and financial burdens for families. Mixed methods with quantitative questionnaires and qualitative interviews. Patients (N = 149) reported annual averages for non-reimbursed health services co-payments and out-of-pocket costs ranging from $3913 to $5829 depending on insurance coverage. Thirty one patients (21%) reported inadequate health coverage related to their non-reimbursed costs. Non-reimbursed costs related to HF care are substantial and vary depending on their insurance, health services use, and out-of-pocket costs. Patient referral to social services to assist with expenses could provide some relief from the burden of high HF-related costs. Copyright © 2014 Elsevier Inc. All rights reserved.

  17. Fast IRMS screening of pseudoendogenous steroids in doping analyses.

    PubMed

    de la Torre, Xavier; Colamonici, Cristiana; Curcio, Davide; Botrè, Francesco

    2017-11-01

    The detection of the abuse of pseudoendogenous steroids (testosterone and/or its precursors) is currently based, when possible, on the application of the steroid module of the World Anti-Doping Agency (WADA), athlete biological passport (ABP), implemented through the global database, ADAMS. When a suspicious sample is detected, the confirmation by isotope ratio mass spectrometry (IRMS) is required. It is well known that this confirmation procedure is time consuming and expensive and can be only applied on a reduced number of samples. In previous studies we have demonstrated that the longitudinal evaluation of the IRMS data is able to detect positive samples that otherwise will be evaluated as negative, improving the efficacy of the fight against doping in sport. This would require the analysis of a much larger volume of samples by IRMS. The aim of the present work is to describe an IRMS screening method allowing to increase the throughput of samples that can be analyzed by IRMS. The detection efficacy of the method is compared with the confirmation method in use, and to assess its robustness and applicability, all the samples of a major cycling stage competition were analyzed, with the agreement of the testing authority, under routine conditions and response times. The results obtained permit to conclude that the IRMS screening method here proposed has adequate selectivity and produces results that overlap with the already validated method currently in use permitting to analyze a much higher volume of samples even during a major event without compromising the detection capacity. Copyright © 2017 John Wiley & Sons, Ltd. Copyright © 2017 John Wiley & Sons, Ltd.

  18. The Correlation of Arterial Stiffness with Biophysical Parameters and Blood Biochemistry.

    PubMed

    Khiyami, Anamil M; Dore, Fiona J; Mammadova, Aytan; Amdur, Richard L; Sen, Sabyasachi

    2017-05-01

    Type 2 diabetes presents with numerous macrovascular and microvascular impairments, which in turn lead to various co-morbidities. Vascular co-morbidities can be seen when examining arterial stiffness (AS), which is a predictor for endothelial health and cardiovascular disease risk. Pulse wave analysis (PWA) and pulse wave velocity (PWV) are two tests that are commonly used to measure AS. Currently, disease states and progression are tracked via blood biochemistry. These gold standards in monitoring diabetes are expensive and need optimization. To investigate which biophysical and biochemical parameters correlated best with AS, which may reduce the number of biochemical tests and biophysical parameter measurements needed to track disease progression. Data from 42 subjects with type 2 diabetes mellitus for ≤10 years, aged 40-70 years, were analyzed at a single time point. We investigated various blood biochemistry, body composition, and AS parameters. A combination of fat mass and fat-free mass was most associated with PWA over any other parameters. Leptin and high-sensitivity C-reactive protein seem to be the next two parameters that correlate with augmentation index. No other parameters had strong correlations to either PWA or PWV values. Body composition methods seemed to be better predictors of type 2 diabetes mellitus patient's vascular disease progression. Our study indicates that body composition measurements may help replace expensive tests. This may have public health and health surveillance implications in countries facing financial challenges.

  19. Development and validation of a novel hydrolysis probe real-time polymerase chain reaction for agamid adenovirus 1 in the central bearded dragon (Pogona vitticeps).

    PubMed

    Fredholm, Daniel V; Coleman, James K; Childress, April L; Wellehan, James F X

    2015-03-01

    Agamid adenovirus 1 (AgAdv-1) is a significant cause of disease in bearded dragons (Pogona sp.). Clinical manifestations of AgAdv-1 infection are variable and often nonspecific; the manifestations range from lethargy, weight loss, and inappetence, to severe enteritis, hepatitis, and sudden death. Currently, diagnosis of AgAdv-1 infection is achieved through a single published method: standard nested polymerase chain reaction (nPCR) and sequencing. Standard nPCR with sequencing provides reliable sensitivity, specificity, and validation of PCR products. However, this process is comparatively expensive, laborious, and slow. Probe hybridization, as used in a TaqMan assay, represents the best option for validating PCR products aside from the time-consuming process of sequencing. This study developed a real-time PCR (qPCR) assay using a TaqMan probe-based assay, targeting a highly conserved region of the AgAdv-1 genome. Standard curves were generated, detection results were compared with the gold standard conventional PCR and sequencing assay, and limits of detection were determined. Additionally, the qPCR assay was run on samples known to be positive for AgAdv-1 and samples known to be positive for other adenoviruses. Based on the results of these evaluations, this assay allows for a less expensive, rapid, quantitative detection of AgAdv-1 in bearded dragons. © 2015 The Author(s).

  20. Nanoswitch-linked immunosorbent assay (NLISA) for fast, sensitive, and specific protein detection.

    PubMed

    Hansen, Clinton H; Yang, Darren; Koussa, Mounir A; Wong, Wesley P

    2017-09-26

    Protein detection and quantification play critical roles in both basic research and clinical practice. Current detection platforms range from the widely used ELISA to more sophisticated, and more expensive, approaches such as digital ELISA. Despite advances, there remains a need for a method that combines the simplicity and cost-effectiveness of ELISA with the sensitivity and speed of modern approaches in a format suitable for both laboratory and rapid, point-of-care applications. Building on recent developments in DNA structural nanotechnology, we introduce the nanoswitch-linked immunosorbent assay (NLISA), a detection platform based on easily constructed DNA nanodevices that change conformation upon binding to a target protein with the results read out by gel electrophoresis. NLISA is surface-free and includes a kinetic-proofreading step for purification, enabling both enhanced sensitivity and reduced cross-reactivity. We demonstrate femtomolar-level detection of prostate-specific antigen in biological fluids, as well as reduced cross-reactivity between different serotypes of dengue and also between a single-mutation and wild-type protein. NLISA is less expensive, uses less sample volume, is more rapid, and, with no washes, includes fewer hands-on steps than ELISA, while also achieving superior sensitivity. Our approach also has the potential to enable rapid point-of-care assays, as we demonstrate by performing NLISA with an iPad/iPhone camera for imaging.

  1. Nanoscience and Nanotechnology Concepts for Enriching High School Curricula

    NASA Astrophysics Data System (ADS)

    Sanders, Charlotte; Marshall, Jill

    2010-03-01

    High school science teachers seeking to enhance student enthusiasm for science and to enrich their curricula with ``real world'' examples might be interested in drawing on nanoscience, which is currently a major branch of study in biology, chemistry, and physics---key high school curriculum areas---and is also a subject much reported upon by the news media. However, presenting nanoscience and nanotechnology in the classroom presents key challenges: the subject matter must be successfully integrated into the core curriculum so as to enhance the students' educational experience; it must support the aims of Texas Essential Knowledge and Skills for Science (TEKC), or equivalent systems in other states; it must be made accessible to students; and it must be presentable with the use of equipment or supplies that are neither too expensive nor too rare to be obtainable by school districts. These last two requirements are particularly difficult, because it is the nature of nanoscale research that complex fabrication processes and expensive characterization methods are typically required. This talk will discuss the authors' experience leading a teachers' workshop session in 2009 to address the issue of introducing nanoscience into the high school science classroom. The workshop is funded by the NSF through the UT-IGERT program, and brings together teachers from across Texas annually for discussion, curriculum-building, and training in concepts related to nanoscience and nanotechnology.

  2. Willingness to pay for health care services in common cold, retinal detachment, and myocardiac infarction: an internet survey in Japan.

    PubMed

    Yasunaga, Hideo; Ide, Hiroo; Imamura, Tomoaki; Ohe, Kazuhiko

    2006-02-20

    The application of Willingness To Pay (WTP) measurement with Contingent Valuation Method (CVM) to medical services is gradually increasing. Knowing what influences WTP is an important matter because validity of CVM in medical services remains controversial. The objective of this survey is to measure WTP for the treatment of typical acute illnesses and to analyze the factors affecting WTP. A questionnaire survey was conducted over the Internet, in which 795 men and women between 40 and 59 years old responded to questions about WTP for medical expenses in three hypothetical scenarios: common cold (CC), retinal detachment (RD) and myocardiac infarction (MI). Mean WTP was $29.9 for CC, $2,233 for RD, and $8,976 for MI. WTP for RD and MI was lower in the low-income group. While WTP for CC did not vary with income, WTP was higher in groups whose current subjective fitness levels were low. Although WTP measurements are criticized frequently for their validity and reliability, they are still useful for determining the economic value of medical services. Based on the results of this study, it is deemed necessary to enhance safety nets for low-income earners in regards to serious illnesses that incur high medical expenses. Further, it is recommended that the rate of co-payments be set relatively high with respect to mild illnesses for which alternative services are available.

  3. Arrival of Norplant may be bittersweet for clinics.

    PubMed

    1991-01-01

    While the approval of NORPLANT in the US now offers women an effective reversible contraceptive, public health clinics will face several obstacles in providing the new method--especially cost. Wyeth-Ayerst Laboratories, the company marketing NORPLANT, has yet to disclose the price for the new contraceptive, but experts believe that it will be at least $300 per set of implants. Adding the price of insertion, NORPLANT could cost over $500. Planned Parenthood officials say that this will make it far too expensive for public clinics, which currently obtain contraceptives at less than retail cost. Individual, women will also face the high price, since most insurance companies don't cover the cost of contraceptives. Another problem facing the introduction of NORPLANT is the bleeding irregularities most women experience under the new method, especially during the first year. One study of NORPLANT reported that out of 200 women, 17% chose to discontinue the treatment because of bleeding changes. Wyeth-Ayerst's own label indicates that out of 849 women who discontinued use during the first year, 75% did so because of bleeding irregularities. An additional problem with NORPLANT is that clinicians will have to undergo intensive training on the insertion and, more importantly, removal of the implants. Currently there's only a limited number of training sites in the country.

  4. Methods of ex vivo expansion of human cord blood cells: challenges, successes and clinical implications.

    PubMed

    Baron, Frédéric; Ruggeri, Annalisa; Nagler, Arnon

    2016-03-01

    More than 40,000 unrelated cord blood transplantations (UCBT) have been performed worldwide as treatment for patients with malignant or non-malignant life threatening hematologic disorders. However, low absolute numbers of hematopoietic stem and progenitor cells (HSPCs) within a single cord blood unit has remained a limiting factor for this transplantation modality, particularly in adult recipients. Further, because UCB contains low numbers of mostly naïve T cells, immune recovery after UCBT is slow, predisposing patients to severe infections. Other causes of UCBT failure has included graft-versus-host disease (GVHD) and relapse of the underlying disease. In this article, we first review the current landscape of cord blood engineering aimed at improving engraftment. This includes approaches of UCB-HSPCs expansion and methods aimed at improving UCB-HSCPs homing. We then discuss recent approaches of cord blood engineering developed to prevent infection [generation of multivirus-specific cytotoxic T cells (VSTs) from UCB], relapse [transduction of UCB-T cells with tumor-specific chimeric receptor antigens (CARs)] and GVHD (expansion of regulatory T cells from UCB). Although many of these techniques of UCB engineering remain currently technically challenging and expensive, they are likely to revolutionize the field of UCBT in the next decades.

  5. Ocular biomarkers of Alzheimer's disease.

    PubMed

    Heaton, George R; Davis, Benjamin M; Turner, Lisa A; Cordeiro, Maria F

    2015-01-01

    Alzheimer's disease (AD) is a devastating neurodegenerative disease characterised clinically by a progressive decline in executive functions, memory and cognition. Classic neuropathological hallmarks of AD include intracellular hyper-phosphorylated tau protein which forms neurofibrillary tangles (NFT), and extracellular deposits of amyloid β (Aβ) protein, the primary constituent of senile plaques (SP). The gradual process of pathogenic amyloid accumulation is thought to occur 10-20 years prior to symptomatic manifestation. Advance detection of these deposits therefore offers a highly promising avenue for prodromal AD diagnosis. Currently, the most sophisticated method of 'probable AD' diagnosis is via neuroimaging or cerebral spinal fluid (CSF) biomarker analysis. Whilst these methods have reported a high degree of diagnostic specificity and accuracy, they fall significantly short in terms of practicality; they are often highly invasive, expensive or unsuitable for large-scale population screening. In recent years, ocular screening has received substantial attention from the scientific community due to its potential for non-invasive and inexpensive central nervous system (CNS) imaging. In this appraisal we build upon our previous reviews detailing ocular structural and functional changes in AD (Retinal manifestations of Alzheimer's disease, Alzheimer's disease and Retinal Neurodegeneration) and consider their use as biomarkers. In addition, we present an overview of current advances in the use of fluorescent reporters to detect AD pathology through non-invasive retinal imaging.

  6. Single Locked Nucleic Acid-Enhanced Nanopore Genetic Discrimination of Pathogenic Serotypes and Cancer Driver Mutations.

    PubMed

    Tian, Kai; Chen, Xiaowei; Luan, Binquan; Singh, Prashant; Yang, Zhiyu; Gates, Kent S; Lin, Mengshi; Mustapha, Azlin; Gu, Li-Qun

    2018-05-22

    Accurate and rapid detection of single-nucleotide polymorphism (SNP) in pathogenic mutants is crucial for many fields such as food safety regulation and disease diagnostics. Current detection methods involve laborious sample preparations and expensive characterizations. Here, we investigated a single locked nucleic acid (LNA) approach, facilitated by a nanopore single-molecule sensor, to accurately determine SNPs for detection of Shiga toxin producing Escherichia coli (STEC) serotype O157:H7, and cancer-derived EGFR L858R and KRAS G12D driver mutations. Current LNA applications that require incorporation and optimization of multiple LNA nucleotides. But we found that in the nanopore system, a single LNA introduced in the probe is sufficient to enhance the SNP discrimination capability by over 10-fold, allowing accurate detection of the pathogenic mutant DNA mixed in a large amount of the wild-type DNA. Importantly, the molecular mechanistic study suggests that such a significant improvement is due to the effect of the single-LNA that both stabilizes the fully matched base-pair and destabilizes the mismatched base-pair. This sensitive method, with a simplified, low cost, easy-to-operate LNA design, could be generalized for various applications that need rapid and accurate identification of single-nucleotide variations.

  7. Field testing of tele-operation versus shared and traded control for military assets: an evaluation involving real-time embedded simulation and soldier assessment

    NASA Astrophysics Data System (ADS)

    Metcalfe, Jason S.; Alban, Jillyn; Cosenzo, Keryl; Johnson, Tony; Capstick, Erin

    2010-04-01

    Those applying autonomous technologies to military systems strive to enhance human-robot and robot-robot performance. Beyond performance, the military must be concerned with local area security. Characterized as "secure mobility", military systems must enable safe and effective terrain traversal concurrent with maintenance of situational awareness (SA). One approach to interleaving these objectives is supervisory control, with popular options being shared and traded control. Yet, with the scale and expense of military assets, common technical issues such as transition time and safeguarding become critical; especially as they interact with Soldier capabilities. Study is required to enable selection of control methods that optimize Soldier-system performance while safeguarding both individually. The current report describes a study utilizing experimental military vehicles and simulation systems enabling teleoperation and supervisory control. Automated triggering of SA demands was interspersed with a set of challenging driving maneuvers in a 'teleoperation-like' context to examine the influence of supervisory control on Soldier-system performance. Results indicated that direct application of supervisory control, while beneficial under particular demands, requires continued development to be perceived by Soldiers as useful. Future efforts should more tightly couple the information exchanged between the Soldier and system to overcome current challenges not addressed by standard control methods.

  8. Reduced order surrogate modelling (ROSM) of high dimensional deterministic simulations

    NASA Astrophysics Data System (ADS)

    Mitry, Mina

    Often, computationally expensive engineering simulations can prohibit the engineering design process. As a result, designers may turn to a less computationally demanding approximate, or surrogate, model to facilitate their design process. However, owing to the the curse of dimensionality, classical surrogate models become too computationally expensive for high dimensional data. To address this limitation of classical methods, we develop linear and non-linear Reduced Order Surrogate Modelling (ROSM) techniques. Two algorithms are presented, which are based on a combination of linear/kernel principal component analysis and radial basis functions. These algorithms are applied to subsonic and transonic aerodynamic data, as well as a model for a chemical spill in a channel. The results of this thesis show that ROSM can provide a significant computational benefit over classical surrogate modelling, sometimes at the expense of a minor loss in accuracy.

  9. A smartphone photogrammetry method for digitizing prosthetic socket interiors.

    PubMed

    Hernandez, Amaia; Lemaire, Edward

    2017-04-01

    Prosthetic CAD/CAM systems require accurate 3D limb models; however, difficulties arise when working from the person's socket since current 3D scanners have difficulties scanning socket interiors. While dedicated scanners exist, they are expensive and the cost may be prohibitive for a limited number of scans per year. A low-cost and accessible photogrammetry method for socket interior digitization is proposed, using a smartphone camera and cloud-based photogrammetry services. 15 two-dimensional images of the socket's interior are captured using a smartphone camera. A 3D model is generated using cloud-based software. Linear measurements were comparing between sockets and the related 3D models. 3D reconstruction accuracy averaged 2.6 ± 2.0 mm and 0.086 ± 0.078 L, which was less accurate than models obtained by high quality 3D scanners. However, this method would provide a viable 3D digital socket reproduction that is accessible and low-cost, after processing in prosthetic CAD software. Clinical relevance The described method provides a low-cost and accessible means to digitize a socket interior for use in prosthetic CAD/CAM systems, employing a smartphone camera and cloud-based photogrammetry software.

  10. Identification of informative features for predicting proinflammatory potentials of engine exhausts.

    PubMed

    Wang, Chia-Chi; Lin, Ying-Chi; Lin, Yuan-Chung; Jhang, Syu-Ruei; Tung, Chun-Wei

    2017-08-18

    The immunotoxicity of engine exhausts is of high concern to human health due to the increasing prevalence of immune-related diseases. However, the evaluation of immunotoxicity of engine exhausts is currently based on expensive and time-consuming experiments. It is desirable to develop efficient methods for immunotoxicity assessment. To accelerate the development of safe alternative fuels, this study proposed a computational method for identifying informative features for predicting proinflammatory potentials of engine exhausts. A principal component regression (PCR) algorithm was applied to develop prediction models. The informative features were identified by a sequential backward feature elimination (SBFE) algorithm. A total of 19 informative chemical and biological features were successfully identified by SBFE algorithm. The informative features were utilized to develop a computational method named FS-CBM for predicting proinflammatory potentials of engine exhausts. FS-CBM model achieved a high performance with correlation coefficient values of 0.997 and 0.943 obtained from training and independent test sets, respectively. The FS-CBM model was developed for predicting proinflammatory potentials of engine exhausts with a large improvement on prediction performance compared with our previous CBM model. The proposed method could be further applied to construct models for bioactivities of mixtures.

  11. A prediction model of drug-induced ototoxicity developed by an optimal support vector machine (SVM) method.

    PubMed

    Zhou, Shu; Li, Guo-Bo; Huang, Lu-Yi; Xie, Huan-Zhang; Zhao, Ying-Lan; Chen, Yu-Zong; Li, Lin-Li; Yang, Sheng-Yong

    2014-08-01

    Drug-induced ototoxicity, as a toxic side effect, is an important issue needed to be considered in drug discovery. Nevertheless, current experimental methods used to evaluate drug-induced ototoxicity are often time-consuming and expensive, indicating that they are not suitable for a large-scale evaluation of drug-induced ototoxicity in the early stage of drug discovery. We thus, in this investigation, established an effective computational prediction model of drug-induced ototoxicity using an optimal support vector machine (SVM) method, GA-CG-SVM. Three GA-CG-SVM models were developed based on three training sets containing agents bearing different risk levels of drug-induced ototoxicity. For comparison, models based on naïve Bayesian (NB) and recursive partitioning (RP) methods were also used on the same training sets. Among all the prediction models, the GA-CG-SVM model II showed the best performance, which offered prediction accuracies of 85.33% and 83.05% for two independent test sets, respectively. Overall, the good performance of the GA-CG-SVM model II indicates that it could be used for the prediction of drug-induced ototoxicity in the early stage of drug discovery. Copyright © 2014 Elsevier Ltd. All rights reserved.

  12. 26 CFR 1.863-3 - Allocation and apportionment of income from certain sales of inventory.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... income from sources within and without the United States determined under the 50/50 method. Research and... Possession Purchase Sales—(A) Business activity method. Gross income from Possession Purchase Sales is... from Possession Purchase Sales computed under the business activity method, the amounts of expenses...

  13. 26 CFR 1.861-9T - Allocation and apportionment of interest expense (temporary).

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... income method described in paragraph (j) of this section is not available to any controlled foreign... given tax year. The method of allocation and apportionment for interest set forth in this section is... of such group were a single corporation. For the method of determining the interest deduction allowed...

  14. Survey of South African fruit juices using a fast screening HILIC-MS method.

    PubMed

    Stander, Marietjie A; Kühn, Wernich; Hiten, Nicholas F

    2013-01-01

    Adulteration of fruit juices--by the addition of sugar or other less expensive fruit juices as well as preservatives, artificial sweeteners and colours--was tested for by using a developed screening method. The method employs hydrophilic interaction liquid chromatography-mass spectrometry (HILIC-MS) using electrospray ionisation in the negative mode and ultraviolet light detection. Different fruit juices can be differentiated by the content of marker compounds like sorbitol, certain phenolic molecules and their saccharide profile. This method was used to test 46 fruit juice samples from the retail market as well as 12 control samples. The study focused on the main types of fruit juices consumed on the South African market including apple, orange, grape and blends of these juices with other fruits like mango, pear and guava. Overall, the 46 samples tested mostly agreed with label claims. One grape juice sample was adulterated, probably with apple juice. Natamycin above the legal limits was found in two samples. In addition, two samples contained natamycin and one sample benzoate without it being indicated on the label. The method is well suited as a quick screening method for fruit juice adulteration and if used routinely would reduce fruit juice adulteration without the cost of the current array of tests needed for authenticity testing.

  15. Shape optimization of self-avoiding curves

    NASA Astrophysics Data System (ADS)

    Walker, Shawn W.

    2016-04-01

    This paper presents a softened notion of proximity (or self-avoidance) for curves. We then derive a sensitivity result, based on shape differential calculus, for the proximity. This is combined with a gradient-based optimization approach to compute three-dimensional, parameterized curves that minimize the sum of an elastic (bending) energy and a proximity energy that maintains self-avoidance by a penalization technique. Minimizers are computed by a sequential-quadratic-programming (SQP) method where the bending energy and proximity energy are approximated by a finite element method. We then apply this method to two problems. First, we simulate adsorbed polymer strands that are constrained to be bound to a surface and be (locally) inextensible. This is a basic model of semi-flexible polymers adsorbed onto a surface (a current topic in material science). Several examples of minimizing curve shapes on a variety of surfaces are shown. An advantage of the method is that it can be much faster than using molecular dynamics for simulating polymer strands on surfaces. Second, we apply our proximity penalization to the computation of ideal knots. We present a heuristic scheme, utilizing the SQP method above, for minimizing rope-length and apply it in the case of the trefoil knot. Applications of this method could be for generating good initial guesses to a more accurate (but expensive) knot-tightening algorithm.

  16. An iterative method for hydrodynamic interactions in Brownian dynamics simulations of polymer dynamics

    NASA Astrophysics Data System (ADS)

    Miao, Linling; Young, Charles D.; Sing, Charles E.

    2017-07-01

    Brownian Dynamics (BD) simulations are a standard tool for understanding the dynamics of polymers in and out of equilibrium. Quantitative comparison can be made to rheological measurements of dilute polymer solutions, as well as direct visual observations of fluorescently labeled DNA. The primary computational challenge with BD is the expensive calculation of hydrodynamic interactions (HI), which are necessary to capture physically realistic dynamics. The full HI calculation, performed via a Cholesky decomposition every time step, scales with the length of the polymer as O(N3). This limits the calculation to a few hundred simulated particles. A number of approximations in the literature can lower this scaling to O(N2 - N2.25), and explicit solvent methods scale as O(N); however both incur a significant constant per-time step computational cost. Despite this progress, there remains a need for new or alternative methods of calculating hydrodynamic interactions; large polymer chains or semidilute polymer solutions remain computationally expensive. In this paper, we introduce an alternative method for calculating approximate hydrodynamic interactions. Our method relies on an iterative scheme to establish self-consistency between a hydrodynamic matrix that is averaged over simulation and the hydrodynamic matrix used to run the simulation. Comparison to standard BD simulation and polymer theory results demonstrates that this method quantitatively captures both equilibrium and steady-state dynamics after only a few iterations. The use of an averaged hydrodynamic matrix allows the computationally expensive Brownian noise calculation to be performed infrequently, so that it is no longer the bottleneck of the simulation calculations. We also investigate limitations of this conformational averaging approach in ring polymers.

  17. Shooting with sound: optimizing an affordable ballistic gelatin recipe in a graded ultrasound phantom education program.

    PubMed

    Tanious, Shariff F; Cline, Jamie; Cavin, Jennifer; Davidson, Nathan; Coleman, J Keegan; Goodmurphy, Craig W

    2015-06-01

    The goal of this study was to investigate the durability and longevity of gelatin formulas for the production of staged ultrasound phantoms for education. Gelatin phantoms were prepared from Knox gelatin (Kraft Foods, Northfield, IL) and a standard 10%-by-mass ordinance gelatin solution. Phantoms were durability tested by compressing to a 2-cm depth until cracking was visible. Additionally, 16 containers with varying combinations of phenol, container type, and storage location were tested for longevity against desiccation and molding. Once formulation was determined, 4 stages of phantoms from novice to clinically relevant were poured, and clinicians with ultrasound training ranked them on a 7-point Likert scale based on task difficulty, phantom suitability, and fidelity. On durability testing, the ballistic gelatin outperformed the Knox gelatin by more than 200 compressions. On longevity testing, gelatin with a 0.5% phenol concentration stored with a lid and refrigeration lasted longest, whereas containers without a lid had desiccation within 1 month, and those without phenol became moldy within 6 weeks. Ballistic gelatin was more expensive when buying in small quantities but was 7.4% less expensive when buying in bulk. The staged phantoms were deemed suitable for training, but clinicians did not consistently rank the phantoms in the intended order of 1 to 4 (44%). Refrigerated and sealed ballistic gelatin with phenol was a cost-effective method for creating in-house staged ultrasound phantoms suitable for large-scale ultrasound educational training needs. Clinician ranking of phantoms may be influenced by current training methods that favor biological tissue scanning as easier. © 2015 by the American Institute of Ultrasound in Medicine.

  18. Simultaneous Observations of Beach and Surf-Zone Topography from a sUAS

    NASA Astrophysics Data System (ADS)

    Slocum, R. K.; Brodie, K. L.; Spore, N.

    2016-02-01

    Beaches and surf-zones can vary rapidly in time and space, necessitating frequent, spatially extensive observations for up-to-date knowledge on their current condition. Traditional surveying methods are expensive, can be dangerous in large wave conditions, and can lack sufficient spatial density. Existing remote sensing technologies have focused on both active sensing (airborne lidar, X-band radar) or passive sensing (electro-optical or infrared imagery) to either directly measure elevations of the beach and seafloor or exploit the optical signal of refracting and breaking waves in the surf-zone. These methods, however, can be prohibitively expensive for widespread, high temporal frequency use, or lack the spatial coverage required to quantify a large stretch of beach. UAS offer an affordable and accessible alternative, but existing COTS UAS sensor suites are not optimized for generation of bathymetry and topography at the same time. Here, we present a new approach using an inexpensive, custom multi-camera sensor designed with a wide field of view for integration on either a fixed wing of multirotor UAS platform. We introduce a processing methodology and workflow to generate a topographic pointcloud and rectified imagery of the water surface using structure from motion algorithms. The topographic pointcloud data is processed to generate a DSM of the beach and extract morphologic parameters (beach slope, dune toe, etc). Rectified imagery of the water surface is used to quantify sandbar location as well as perform a celerity based bathymetric inversion. Accuracy of this methodology is calculated by comparing processed data to lidar pointclouds, as well as photo identifiable targets on the beach and jetted into the surf zone. Funded by the USACE Military Engineering POD:A&U Program and Coastal Field Data Collection Program.

  19. Kaizen method for esophagectomy patients: improved quality control, outcomes, and decreased costs.

    PubMed

    Iannettoni, Mark D; Lynch, William R; Parekh, Kalpaj R; McLaughlin, Kelley A

    2011-04-01

    The majority of costs associated with esophagectomy are related to the initial 3 days of hospital stay requiring intensive care unit stays, ventilator support, and intraoperative time. Additional costs arise from hospital-based services. The major cost increases are related to complications associated with the procedure. We attempted to define these costs and identify expense management by streamlining care through strict adherence to patient care maps, operative standardization, and rapid discharge planning to reduce variability. Utilizing methods of Kaizen philosophy we evaluated all processes related to the entire experience of esophageal resection. This process has taken over 5 years to achieve, with quality and cost being tracked over this time period. Cost analysis included expenses related to intensive care unit, anesthesia, disposables, and hospital services. Quality improvement measures were related to intraoperative complications, in-hospital complications, and postoperative outcomes. The Institutional Review Board approved the use of anonymous data from standard clinical practice because no additional treatment was planned (observational study). Utilizing a continuous process improvement methodology, a 43% reduction in cost per case has been achieved with a significant increase in contribution margin for esophagectomy. The length of stay has been reduced from 14 days to 5. With intraoperative and postoperative standardization the leak rate has dropped from 12% to less than 3% to no leaks in our current Kaizen modification of care in our last 64 patients. Utilizing lean manufacturing techniques and continuous process evaluation we have attempted to eliminate variability, standardized the phases of care resulting in improved outcomes, decreased length of stay, and improved contribution margins. These Kaizen improvements require continuous interventions, strict adherence to care maps, and input from all levels for quality improvements. Copyright © 2011 The Society of Thoracic Surgeons. Published by Elsevier Inc. All rights reserved.

  20. H2S mediated thermal and photochemical methane activation

    PubMed Central

    Baltrusaitis, Jonas; de Graaf, Coen; Broer, Ria; Patterson, Eric

    2013-01-01

    Sustainable, low temperature methods of natural gas activation are critical in addressing current and foreseeable energy and hydrocarbon feedstock needs. Large portions of natural gas resources are still too expensive to process due to their high content of hydrogen sulfide gas (H2S) in mixture with methane, CH4, altogether deemed as sub-quality or “sour” gas. We propose a unique method for activating this “sour” gas to form a mixture of sulfur-containing hydrocarbon intermediates, CH3SH and CH3SCH3, and an energy carrier, such as H2. For this purpose, we computationally investigated H2S mediated methane activation to form a reactive CH3SH species via direct photolysis of sub-quality natural gas. Photoexcitation of hydrogen sulfide in the CH4+H2S complex results in a barrier-less relaxation via a conical intersection to form a ground state CH3SH+H2 complex. The resulting CH3SH can further be heterogeneously coupled over acidic catalysts to form higher hydrocarbons while the H2 can be used as a fuel. This process is very different from a conventional thermal or radical-based processes and can be driven photolytically at low temperatures, with enhanced controllability over the process conditions currently used in industrial oxidative natural gas activation. Finally, the proposed process is CO2 neutral, as opposed to the currently industrially used methane steam reforming (SMR). PMID:24150813

  1. No-cost manual method for preparation of tissue microarrays having high quality comparable to semiautomated methods.

    PubMed

    Foda, Abd Al-Rahman Mohammad

    2013-05-01

    Manual tissue microarray (TMA) construction had been introduced to avoid the high cost of automated and semiautomated techniques. The cheapest and simplest technique for constructing manual TMA was that of using mechanical pencil tips. This study was carried out to modify this method, aiming to raise its quality to reach that of expensive ones. Some modifications were introduced to Shebl's technique. Two conventional mechanical pencil tips of different diameters were used to construct the recipient blocks. A source of mild heat was used, and blocks were incubated at 38°C overnight. With our modifications, 3 high-density TMA blocks were constructed. We successfully performed immunostaining without substantial tissue loss. Our modifications increased the number of cores per block and improved the stability of the cores within the paraffin block. This new, modified technique is a good alternative for expensive machines in many laboratories.

  2. A new accounting system for financial balance based on personnel cost after the introduction of a DPC/DRG system.

    PubMed

    Nakagawa, Yoshiaki; Takemura, Tadamasa; Yoshihara, Hiroyuki; Nakagawa, Yoshinobu

    2011-04-01

    A hospital director must estimate the revenues and expenses not only in a hospital but also in each clinical division to determine the proper management strategy. A new prospective payment system based on the Diagnosis Procedure Combination (DPC/PPS) introduced in 2003 has made the attribution of revenues and expenses for each clinical department very complicated because of the intricate involvement between the overall or blanket component and a fee-for service (FFS). Few reports have so far presented a programmatic method for the calculation of medical costs and financial balance. A simple method has been devised, based on personnel cost, for calculating medical costs and financial balance. Using this method, one individual was able to complete the calculations for a hospital which contains 535 beds and 16 clinics, without using the central hospital computer system.

  3. Reducing the cost of headache medication.

    PubMed

    Solomon, Glen D

    2009-06-01

    Although medication costs make up one of the smallest portions of the overall expense of headache care, it is the segment of expense that often impacts the patient most directly. The advent of triptans marked a major advance in migraine therapy, but their high cost has limited their widespread use. Four options can be considered as potential means to reduce the cost of triptans. These include compulsory licensing, exclusive contracting, over-the-counter -availability, and the introduction of generic triptans. Each method impacts the consumer, third-party payer, or pharmaceutical company in a different manner.

  4. Current trends for customized biomedical software tools.

    PubMed

    Khan, Haseeb Ahmad

    2017-01-01

    In the past, biomedical scientists were solely dependent on expensive commercial software packages for various applications. However, the advent of user-friendly programming languages and open source platforms has revolutionized the development of simple and efficient customized software tools for solving specific biomedical problems. Many of these tools are designed and developed by biomedical scientists independently or with the support of computer experts and often made freely available for the benefit of scientific community. The current trends for customized biomedical software tools are highlighted in this short review.

  5. Simple, simultaneous gravimetric determination of calcite and dolomite in calcareous soils

    USDA-ARS?s Scientific Manuscript database

    Literature pertaining to determination of calcite and dolomite is not modern and describes slow methods that require expensive specialized apparatus. The objective of this paper was to describe a new method that requires no specialized equipment. Linear regressions and correlation coefficients for...

  6. Current CFD Practices in Launch Vehicle Applications

    NASA Technical Reports Server (NTRS)

    Kwak, Dochan; Kiris, Cetin

    2012-01-01

    The quest for sustained space exploration will require the development of advanced launch vehicles, and efficient and reliable operating systems. Development of launch vehicles via test-fail-fix approach is very expensive and time consuming. For decision making, modeling and simulation (M&S) has played increasingly important roles in many aspects of launch vehicle development. It is therefore essential to develop and maintain most advanced M&S capability. More specifically computational fluid dynamics (CFD) has been providing critical data for developing launch vehicles complementing expensive testing. During the past three decades CFD capability has increased remarkably along with advances in computer hardware and computing technology. However, most of the fundamental CFD capability in launch vehicle applications is derived from the past advances. Specific gaps in the solution procedures are being filled primarily through "piggy backed" efforts.on various projects while solving today's problems. Therefore, some of the advanced capabilities are not readily available for various new tasks, and mission-support problems are often analyzed using ad hoc approaches. The current report is intended to present our view on state-of-the-art (SOA) in CFD and its shortcomings in support of space transport vehicle development. Best practices in solving current issues will be discussed using examples from ascending launch vehicles. Some of the pacing will be discussed in conjunction with these examples.

  7. Correlation energy extrapolation by many-body expansion

    DOE PAGES

    Boschen, Jeffery S.; Theis, Daniel; Ruedenberg, Klaus; ...

    2017-01-09

    Accounting for electron correlation is required for high accuracy calculations of molecular energies. The full configuration interaction (CI) approach can fully capture the electron correlation within a given basis, but it does so at a computational expense that is impractical for all but the smallest chemical systems. In this work, a new methodology is presented to approximate configuration interaction calculations at a reduced computational expense and memory requirement, namely, the correlation energy extrapolation by many-body expansion (CEEMBE). This method combines a MBE approximation of the CI energy with an extrapolated correction obtained from CI calculations using subsets of the virtualmore » orbitals. The extrapolation approach is inspired by, and analogous to, the method of correlation energy extrapolation by intrinsic scaling. Benchmark calculations of the new method are performed on diatomic fluorine and ozone. Finally, the method consistently achieves agreement with CI calculations to within a few mhartree and often achieves agreement to within ~1 millihartree or less, while requiring significantly less computational resources.« less

  8. Correlation energy extrapolation by many-body expansion

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Boschen, Jeffery S.; Theis, Daniel; Ruedenberg, Klaus

    Accounting for electron correlation is required for high accuracy calculations of molecular energies. The full configuration interaction (CI) approach can fully capture the electron correlation within a given basis, but it does so at a computational expense that is impractical for all but the smallest chemical systems. In this work, a new methodology is presented to approximate configuration interaction calculations at a reduced computational expense and memory requirement, namely, the correlation energy extrapolation by many-body expansion (CEEMBE). This method combines a MBE approximation of the CI energy with an extrapolated correction obtained from CI calculations using subsets of the virtualmore » orbitals. The extrapolation approach is inspired by, and analogous to, the method of correlation energy extrapolation by intrinsic scaling. Benchmark calculations of the new method are performed on diatomic fluorine and ozone. Finally, the method consistently achieves agreement with CI calculations to within a few mhartree and often achieves agreement to within ~1 millihartree or less, while requiring significantly less computational resources.« less

  9. Employment-related difficulties and distressed living condition in patients with hepatitis B virus: A qualitative and quantitative study.

    PubMed

    Oka, Taeko; Enoki, Hiroaki; Tokimoto, Yukari; Kawanishi, Teruaki; Minami, Meguru; Okuizumi, Takahiro; Katahira, Kiyohiko

    2017-06-12

    In Japan, an estimated 400,000 people have the hepatitis B virus (HBV), many of whom were infected as a result of group vaccinations. People with HBV face many challenges, including disease progression, employment-related difficulties, and increased medical expenses. The relationship between HBV victims' daily life suffering and poverty associated with HBV-related employment changes has not been examined. We aimed to clarify the employment-related hardships experienced by Japanese HBV victims, and the relationships between these hardships and daily life suffering, including poverty, through qualitative and quantitative analyses. The study population comprised 11,046 people infected with HBV via group vaccination who filed lawsuits in Japan's District Courts by 2014. First, we conducted a qualitative study (2013) using the KJ method, with 107 participants (68 men, mean age 58.9 years; 39 women, mean age 55.3 years). Semi-structured interviews were conducted covering participants' current condition, treatment, medical expenses, and life difficulties (employment- and family-related problems). In 2014, we conducted a quantitative study. We mailed questionnaires to the entire study population, investigating the topics covered in the interviews (response rate 60.1%). Daily life suffering was determined by responses to the question "What do you think about your everyday life situation?" We performed binomial logistic regression analyses to verify the relationships between daily life suffering and disease, employment, and income status. Interview data were integrated into seven islands: intention to work, lack of understanding of HBV in the workplace, inability to buy life insurance, burden due to medical expenses, life failure, dissatisfaction with the system, and wishing for life balance. The quantitative analyses showed significant positive correlations between daily life suffering and liver cancer (odds ratio [OR] 1.47, 95% confidence interval [CI]: 1.00-2.17, p < 0.05), being a part-time/casual employee (OR 1.46, 95% CI: 1.11-1.92 p < 0.01), and an income below the national average (p < 0.01). We qualitatively and quantitatively demonstrated that employment-related hardships and daily life suffering are prevalent in people with HBV. Their likelihood of experiencing distress in daily life increases with increasing medical expenses, insecure employment status (e.g., job loss) attributable to HBV, and the resulting poverty.

  10. Detailed imaging of flowing structures at depth using microseismicity: a tool for site investigation?

    NASA Astrophysics Data System (ADS)

    Pytharouli, S.; Lunn, R. J.; Shipton, Z. K.

    2011-12-01

    Field evidence shows that faults and fractures can act as focused pathways or barriers for fluid migration. This is an important property for modern engineering problems, e.g., CO2 sequestration, geological radioactive waste disposal, geothermal energy exploitation, land reclamation and remediation. For such applications the detailed characterization of the location, orientation and hydraulic properties of existing fractures is necessary. These investigations are expensive, requiring the hire of expensive equipment (excavator or drill rigs), which incur standing charges when not in use. In addition, they only provide information for discrete sample 'windows'. Non-intrusive methods have the ability to gather information across an entire area. Methods including electrical resistivity/conductivity and ground penetrating radar (GRP), have been used as tools for site investigations. Their imaging ability is often restricted due to unfavourable on-site conditions e.g. GRP is not useful in cases where a layer of clay or reinforced concrete is present. Our research has shown that high quality seismic data can be successfully used in the detailed imaging of sub-surface structures at depth; using induced microseismicity data recorded beneath the Açu reservoir in Brazil we identified orientations and values of average permeability of open shear fractures at depths up to 2.5km. Could microseismicity also provide information on the fracture width in terms of stress drops? First results from numerical simulations showed that higher stress drop values correspond to narrower fractures. These results were consistent with geological field observations. This study highlights the great potential of using microseismicity data as a supplementary tool for site investigation. Individual large-scale shear fractures in large rock volumes cannot currently be identified by any other geophysical dataset. The resolution of the method is restricted by the detection threshold of the local seismic networks used for the monitoring of the seismic activity. However, it could be significantly increased if complete seismic data sets were available using high-sensitivity seismographs e.g. nanoseismic monitoring.

  11. Pepsin in saliva for the diagnosis of gastro-oesophageal reflux disease.

    PubMed

    Hayat, Jamal O; Gabieta-Somnez, Shirley; Yazaki, Etsuro; Kang, Jin-Yong; Woodcock, Andrew; Dettmar, Peter; Mabary, Jerry; Knowles, Charles H; Sifrim, Daniel

    2015-03-01

    Current diagnostic methods for gastro-oesophageal reflux disease (GORD) have moderate sensitivity/specificity and can be invasive and expensive. Pepsin detection in saliva has been proposed as an 'office-based' method for GORD diagnosis. The aims of this study were to establish normal values of salivary pepsin in healthy asymptomatic subjects and to determine its value to discriminate patients with reflux-related symptoms (GORD, hypersensitive oesophagus (HO)) from functional heartburn (FH). 100 asymptomatic controls and 111 patients with heartburn underwent MII-pH monitoring and simultaneous salivary pepsin determination on waking, after lunch and dinner. Cut-off value for pepsin positivity was 16 ng/mL. Patients were divided into GORD (increased acid exposure time (AET), n=58); HO (normal AET and + Symptom Association Probability (SAP), n=26) and FH (normal AET and-SAP, n=27). 1/3 of asymptomatic subjects had pepsin in saliva at low concentration (0(0-59)ng/mL). Patients with GORD and HO had higher prevalence and pepsin concentration than controls (HO, 237(52-311)ng/mL and GORD, 121(29-252)ng/mL)(p<0.05). Patients with FH had low prevalence and concentration of pepsin in saliva (0(0-40) ng/mL). A positive test had 78.6% sensitivity and 64.9% specificity for diagnosis of GORD+HO (likelihood ratio: 2.23). However, one positive sample with >210 ng/mL pepsin suggested presence of GORD+HO with 98.2% specificity (likelihood ratio: 25.1). Only 18/84 (21.4%) of GORD+HO patients had 3 negative samples. In patients with symptoms suggestive of GORD, salivary pepsin testing may complement questionnaires to assist office-based diagnosis. This may lessen the use of unnecessary antireflux therapy and the need for further invasive and expensive diagnostic methods. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

  12. A new method for total OH reactivity measurements using a fast Gas Chromatographic Photo-Ionization Detector (GC-PID)

    NASA Astrophysics Data System (ADS)

    Nölscher, A. C.; Sinha, V.; Bockisch, S.; Klüpfel, T.; Williams, J.

    2012-05-01

    The primary and most important oxidant in the atmosphere is the hydroxyl radical (OH). Currently OH sinks, particularly gas phase reactions, are poorly constrained. One way to characterize the overall sink of OH is to measure directly the ambient loss rate of OH, the total OH reactivity. To date direct measurements of total OH reactivity have been either performed using a Laser Induced Fluorescence (LIF) system ("pump-and-probe" or "flow reactor") or the Comparative Reactivity Method (CRM) with a Proton Transfer Reaction Mass Spectrometer (PTR-MS). Both techniques require large, complex and expensive detection systems. This study presents a feasibility assessment for CRM total OH reactivity measurements using a new detector, a Gas Chromatographic Photo-Ionization Detector (GC-PID). Such a system is smaller, more portable, less power consuming and less expensive than other total OH reactivity measurement techniques. Total OH reactivity is measured by the CRM using a competitive reaction between a reagent (here pyrrole) with OH alone and in the presence of atmospheric reactive molecules. The new CRM method for total OH reactivity has been tested with parallel measurements of the GC-PID and the previously validated PTR-MS as detector for the reagent pyrrole during laboratory experiments, plant chamber and boreal field studies. Excellent agreement of both detectors was found when the GC-PID was operated under optimum conditions. Time resolution (60-70 s), sensitivity (LOD 3-6 s-1) and overall uncertainty (25% in optimum conditions) for total OH reactivity were equivalent to PTR-MS based total OH reactivity measurements. One drawback of the GC-PID system was the steady loss of sensitivity and accuracy during intensive measurements lasting several weeks, and a possible toluene interference. Generally, the GC-PID system has been shown to produce closely comparable results to the PTR-MS and thus in suitable environments (e.g. forests) it presents a viably economical alternative for groups interested in total OH reactivity observations.

  13. Introduction of the levonorgestrel intrauterine system in Kenya through mobile outreach: review of service statistics and provider perspectives.

    PubMed

    Hubacher, David; Akora, Vitalis; Masaba, Rose; Chen, Mario; Veena, Valentine

    2014-02-01

    The levonorgestrel intrauterine system (LNG IUS) was developed over 30 years ago, but the product is currently too expensive for widespread use in many developing countries. In Kenya, one organization has received donated commodities for 5 years, providing an opportunity to assess impact and potential future role of the product. We reviewed service statistics on insertions of the LNG IUS, copper intrauterine device (IUD), and subdermal implant from 15 mobile outreach teams during the 2011 calendar year. To determine the impact of the LNG IUS introduction, we analyzed changes in uptake and distribution of the copper IUD and subdermal implant by comparing periods of time when the LNG IUS was available with periods when it was not available. In addition, we interviewed 27 clinicians to assess their views of the product and of its future role. When the LNG IUS was not available, intrauterine contraception accounted for 39% of long-acting method provision. The addition of the LNG IUS created a slight rise in intrauterine contraception uptake (to 44%) at the expense of the subdermal implant, but the change was only marginally significant (P = .08) and was largely attributable to the copper IUD. All interviewed providers felt that the LNG IUS would increase uptake of long-acting methods, and 70% felt that the noncontraceptive benefits of the product are important to clients. The LNG IUS was well-received among providers and family planning clients in this population in Kenya. Although important changes in service statistics were not apparent from this analysis (perhaps due to the small quantity of LNG IUS that was available), provider enthusiasm for the product was high. This finding, above all, suggests that a larger-scale introduction effort would have strong support from providers and thus increase the chances of success. Adding another proven and highly acceptable long-acting contraceptive technology to the method mix could have important reproductive health impact.

  14. Evaluation of three electronic noses for detecting incipient wood decay

    Treesearch

    Manuela Baietto; Alphus D. Wilson; Daniele Bassi; Francesco Ferrini

    2010-01-01

    Tree assessment methodologies, currently used to evaluate the structural stability of individual urban trees, usually involve a visual analysis followed by measurements of the internal soundness of wood using various instruments that are often invasive, expensive, or inadequate for use within the urban environment. Moreover, most conventional instruments do not provide...

  15. Resolving bulimia nervosa using an innovative neural therapy approach: two case reports.

    PubMed

    Gurevich, Michael I; Chung, Myung Kyu; LaRiccia, Patrick J

    2018-02-01

    Conventional treatment of Bulimia Nervosa is long term, expensive, and often ineffective. Neural therapy holds promise for treating Bulimia Nervosa in a shorter term, lower cost, and more effective manner. Much of neural therapy involves the superficial injection of local anesthetic injections. Implementation into current practice would be feasible.

  16. Textbook Deathwatch

    ERIC Educational Resources Information Center

    Salpeter, Judy

    2009-01-01

    Is the print textbook--that old-fashioned, heavy, expensive staple of the 20th-century classroom--soon to be a thing of the past? While it's hard to imagine the K-12 world, known for its resistance to change, throwing out math, language, and science textbooks in favor of digital content, the nation's current fiscal crisis, combined with major…

  17. Lengthened cold stratification improves bulk whitebark pine germination

    Treesearch

    Nathan Robertson; Kent Eggleston; Emily Overton; Marie McLaughlin

    2013-01-01

    Crucial to the restoration of whitebark pine (Pinus albicaulis) ecosystems is the ability of forest managers to locate, propagate, and reintroduce viable, disease-resistant populations to these jeopardized systems. Currently, one of the most limiting steps in this process is the slow, labor-in - tensive, and expensive process of producing whitebark seedlings at forest...

  18. First results with a lab-on-a-chip system for a fast Phytophthora diagnosis.

    Treesearch

    Sonja Horatzek; Stephan König; Stefan Wagner; Sabine Werres; Lydia Schwenkbier; Karina Weber; Jörg. Weber

    2013-01-01

    For Phytophthora spp. that are quarantine or regulated organisms, highly specific and sensitive diagnostic tools are recommended for surveys and monitoring. Furthermore, these diagnostic techniques should give results within a short time and should be not be too expensive. The techniques currently used for routine diagnosis of ...

  19. The Value of ERP Curriculum Integration: Perspectives from the Research

    ERIC Educational Resources Information Center

    Hepner, Michelle; Dickson, Warren

    2013-01-01

    In the current economic conditions, many institutions face dwindling budgets and an increased focus on proving the value of the education provided. The effort and costs required to integrate Enterprise Resource Planning systems into course curricula are a significant investment of resources for any university. This paper examines the expense of…

  20. Credit Card Usage among Older Adults: Assessing Financial Literacy and Pressures

    ERIC Educational Resources Information Center

    St. Pierre, Eileen; Shreffler, Karina

    2013-01-01

    The research reported here assessed the financial literacy of older adults living in rural communities, current use of and attitudes towards debt, and debt pressures. Those surveyed exhibit low credit card usage and responsible payment practices. Most never use credit to pay medical expenses. Respondents display a financial literacy level similar…

  1. Investing Wisely: Citation Rankings as a Measure of Quality in Library and Information Science Journals

    ERIC Educational Resources Information Center

    Via, Barbara J.; Schmidle, Deborah J.

    2007-01-01

    The library and information science field is currently confronted with difficult decisions about how best to allocate acquisition expenditures among increasingly expensive journals. This article measures the return-on-investment of serial expenditures through the use of citation analysis, which is a widely used approach to ascertaining journal…

  2. Learning to coexist with wildfire

    Treesearch

    M.A. Moritz; E. Batlloria; R.A. Bradstock; Jeff Stringer; Robbie Sitzlar; P.F. Hessburg; J. Leonard; S. McCaffrey; D.C. Odion; T. Schoennagel; A.D. Syphard

    2014-01-01

    The impacts of escalating wildfire in many regions — the lives and homes lost, the expense of suppression and the damage to ecosystem services — necessitate a more sustainable coexistence with wildfire. Climate change and continued development on fire-prone landscapes will only compound current problems. Emerging strategies for managing ecosystems and mitigating risks...

  3. A Probablistic Diagram to Guide Chemical Design with Reduced Potency to Incur Cytotoxicity

    EPA Science Inventory

    Toxicity is a concern with many chemicals currently in commerce, and with new chemicals that are introduced each year. The standard approach to testing chemicals is to run studies in laboratory animals (e.g. rats, mice, dogs), but because of the expense of these studies and conce...

  4. Commercial Transfer--A Business Model Innovation for the Entrepreneurial University

    ERIC Educational Resources Information Center

    Gaus, Olaf; Raith, Matthias G.

    2016-01-01

    While knowledge-intensive societies rely heavily on universities for the creation of knowledge, its translation into economic value is typically performed by firms in the market. Since universities increasingly depend on additional funds for new and expensive research, current policies urge them to interact proactively with the market. The authors…

  5. The Professional Educator: Union Strong before and after the Storm

    ERIC Educational Resources Information Center

    Capo, Zeph

    2018-01-01

    It's no secret that organized labor and public education face a time of great uncertainty. Our country's current president and secretary of education, according to this author, have made clear their intent to support corporate greed at the expense of working people and their unions and to champion privatization schemes that undermine public…

  6. Civic Education Reconsidered.

    ERIC Educational Resources Information Center

    Ceaser, James W.; McGuinn, Patrick J.

    1998-01-01

    Explores issues related to civic education, which is currently not in fashion, but likely to become the focus of increasing interest from both conservative and liberal political thinkers. The revival of civic education must not be at the expense of the traditions of both public and private schooling in favor of a set of ideas defined by the…

  7. Probing Clouds in Planets with a Simple Radiative Transfer Model: The Jupiter Case

    ERIC Educational Resources Information Center

    Mendikoa, Inigo; Perez-Hoyos, Santiago; Sanchez-Lavega, Agustin

    2012-01-01

    Remote sensing of planets evokes using expensive on-orbit satellites and gathering complex data from space. However, the basic properties of clouds in planetary atmospheres can be successfully estimated with small telescopes even from an urban environment using currently available and affordable technology. This makes the process accessible for…

  8. Justifying Study Abroad in Financially Difficult Times

    ERIC Educational Resources Information Center

    Ludlum, Marty; Ice, Randal; Sheetz-Nguyen, Jessica

    2013-01-01

    In this paper, we will develop the justification for study abroad. We will discuss the current economic climate and its impact on budgets. Next, we will explain the many benefits of the study abroad programs. Then we will propose some less expensive alternatives to the traditional study abroad programs. We will conclude with expectations for the…

  9. U.S. Accounting Education: Misalignment with the Needs of Small and Medium Companies

    ERIC Educational Resources Information Center

    Burke, Megan M.; Gandolfi, William R.

    2014-01-01

    This study looks to answer the question, "Does the current accounting educational system in the United States focus too heavily on the requirements of large (and SEC registered) companies at the expense of small companies and individuals who comprise the primary clientele of most practicing CPAs?" This investigation surveys CPAs…

  10. Alternative to Proctoring in Introductory Statistics Community College Courses

    ERIC Educational Resources Information Center

    Feinman, Yalena

    2018-01-01

    The credibility of unsupervised exams, one of the biggest challenges of e-learning, is currently maintained by proctoring. However, little has been done to determine whether expensive and inconvenient proctoring is necessary. The purpose of this quantitative study was to determine whether the use of security mechanisms, based on the taxonomy of…

  11. The Barrow Island oilfield development plan, Western Australia

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Bartlett, R.M.

    1996-12-31

    Barrow Island lies 55 kms off the coast of Western Australia, 90 kms north-northeast of Onslow and 1300 kms north of Perth. Oil production began on Barrow Island in 1967 with the 250 millionth barrel being produced in 1992. By 1991, the island had reached the point where: The field, as currently defined, would reach its economic limit early in the next century if operating expenses remained constant and Operating expense was most likely to rise, as aging facilities and infrastructure required increasing maintenance and/or environmental enhancements. In 1991, studies were triggered to develop an integrated plan for Barrow Islandmore » to maximize Net Present Value, targeting both increasing reserves and decreasing operating costs. The studies focused on developing answers to the following four questions: Where is the remaining oil? How can oil recovery be improved? How can current operations be improved? What is the optimal plan for the field? The outcome of the 3 year study has provided answers to these four questions, combining to maximize NPV and possibly result in another 15-25 years of field life.« less

  12. The Barrow Island oilfield development plan, Western Australia

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Bartlett, R.M.

    1996-01-01

    Barrow Island lies 55 kms off the coast of Western Australia, 90 kms north-northeast of Onslow and 1300 kms north of Perth. Oil production began on Barrow Island in 1967 with the 250 millionth barrel being produced in 1992. By 1991, the island had reached the point where: The field, as currently defined, would reach its economic limit early in the next century if operating expenses remained constant and Operating expense was most likely to rise, as aging facilities and infrastructure required increasing maintenance and/or environmental enhancements. In 1991, studies were triggered to develop an integrated plan for Barrow Islandmore » to maximize Net Present Value, targeting both increasing reserves and decreasing operating costs. The studies focused on developing answers to the following four questions: Where is the remaining oil How can oil recovery be improved How can current operations be improved What is the optimal plan for the field The outcome of the 3 year study has provided answers to these four questions, combining to maximize NPV and possibly result in another 15-25 years of field life.« less

  13. [A future image of clinical inspection from health economics].

    PubMed

    Kakihara, Hiroaki

    2006-06-01

    Do you let medical costs increase in proportion to the growth rate of GDP? A way of thinking of the Council on Economic and Fiscal Policy. Should we exclude public medical insurance? It is not a problem, it is an absolute sum if you are effective. If there is no insurance, and individuals pay the total amount, there is no problem, but it is impossible. Economic development will cease if there is no insurance. As medical personnel, to offer good medical care with an appropriate cost. An appeal to the nation is necessary. Economic technical evaluation to identify a cheap method for each clinical inspection. Does medical insurance have a deficit? I. Japanese Health insurance system. (1) Health insurance union. When you look at the contribution money, it is originally 2,479,800,000,000 yen, with premium income and a profit of 45%. (2) Government management health insurance. When you look at the contribution money, it is originally 2,163,300,000,000 yen, with premium income and a profit of 36%. (1) + (2) Employed insurance meter. (3) Mutual aid. (4) National Health Insurance. II. A clinical economic method. III. Expense of medical care and its effect. A. Expense. B. A medical economic technical evaluation method. 1. Cost-effectiveness analysis CEA. 2. Cost utility analysis CUA. 3. Cost-benefit analysis CBA. 4. Expense minimization analysis.

  14. Fatal and nonfatal risk associated with recycle of D&D-generated concrete

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Boren, J.K.; Ayers, K.W.; Parker, F.L.

    1997-02-01

    As decontamination and decommissioning activities proceed within the U.S. Department of Energy Complex, vast volumes of uncontaminated and contaminated concrete will be generated. The current practice of decontaminating and landfilling the concrete is an expensive and potentially wasteful practice. Research is being conducted at Vanderbilt University to assess the economic, social, legal, and political ramifications of alternate methods of dealing with waste concrete. An important aspect of this research work is the assessment of risk associated with the various alternatives. A deterministic risk assessment model has been developed which quantifies radiological as well as non-radiological risks associated with concrete disposalmore » and recycle activities. The risk model accounts for fatal as well as non-fatal risks to both workers and the public. Preliminary results indicate that recycling of concrete presents potentially lower risks than the current practice. Radiological considerations are shown to be of minor importance in comparison to other sources of risk, with conventional transportation fatalities and injuries dominating. Onsite activities can also be a major contributor to non-fatal risk.« less

  15. Adapting viral safety assurance strategies to continuous processing of biological products.

    PubMed

    Johnson, Sarah A; Brown, Matthew R; Lute, Scott C; Brorson, Kurt A

    2017-01-01

    There has been a recent drive in commercial large-scale production of biotechnology products to convert current batch mode processing to continuous processing manufacturing. There have been reports of model systems capable of adapting and linking upstream and downstream technologies into a continuous manufacturing pipeline. However, in many of these proposed continuous processing model systems, viral safety has not been comprehensively addressed. Viral safety and detection is a highly important and often expensive regulatory requirement for any new biological product. To ensure success in the adaption of continuous processing to large-scale production, there is a need to consider the development of approaches that allow for seamless incorporation of viral testing and clearance/inactivation methods. In this review, we outline potential strategies to apply current viral testing and clearance/inactivation technologies to continuous processing, as well as modifications of existing unit operations to ensure the successful integration of viral clearance into the continuous processing of biological products. Biotechnol. Bioeng. 2017;114: 21-32. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

  16. 7 CFR 1212.103 - Instructions.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... voter. (3) Give reasonable public notice of the referendum: (i) By utilizing available media or public information sources, without incurring advertising expense, to publicize the dates, places, method of voting...

  17. Development of a Higher Order Laminate Theory for Modeling Composites with Induced Strain Actuators

    NASA Technical Reports Server (NTRS)

    Chattopadhyay, Aditi; Seeley, Charles E.

    1996-01-01

    A refined higher order plate theory is developed to investigate the actuation mechanism of piezoelectric materials surface bonded or embedded in composite laminates. The current analysis uses a displacement field which accurately accounts for transverse shear stresses. Some higher order terms are identified by using the conditions that shear stresses vanish at all free surfaces. Therefore, all boundary conditions for displacements and stresses are satisfied in the present theory. The analysis is implemented using the finite element method which provides a convenient means to construct a numerical solution due to the discrete nature of the actuators. The higher order theory is computationally less expensive than a full three dimensional analysis. The theory is also shown to agree well with published experimental results. Numerical examples are presented for composite plates with thicknesses ranging from thin to very thick.

  18. Instrumental variable specifications and assumptions for longitudinal analysis of mental health cost offsets.

    PubMed

    O'Malley, A James

    2012-12-01

    Instrumental variables (IVs) enable causal estimates in observational studies to be obtained in the presence of unmeasured confounders. In practice, a diverse range of models and IV specifications can be brought to bear on a problem, particularly with longitudinal data where treatment effects can be estimated for various functions of current and past treatment. However, in practice the empirical consequences of different assumptions are seldom examined, despite the fact that IV analyses make strong assumptions that cannot be conclusively tested by the data. In this paper, we consider several longitudinal models and specifications of IVs. Methods are applied to data from a 7-year study of mental health costs of atypical and conventional antipsychotics whose purpose was to evaluate whether the newer and more expensive atypical antipsychotic medications lead to a reduction in overall mental health costs.

  19. The prevention of thalassemia.

    PubMed

    Cao, Antonio; Kan, Yuet Wai

    2013-02-01

    The thalassemias are among the most common inherited diseases worldwide, affecting individuals originating from the Mediterranean area, Middle East, Transcaucasia, Central Asia, Indian subcontinent, and Southeast Asia. As the diseases require long-term care, prevention of the homozygous state constitutes a major armament in the management. This article discusses the major prevention programs that are set up in many countries in Europe, Asia, and Australia, often drawing from the experience in Sardinia. These comprehensive programs involve carrier detections, molecular diagnostics, genetic counseling, and prenatal diagnosis. Variability of clinical severity can be attributable to interactions with α-thalassemia and mutations that increase fetal productions. Special methods that are currently quite expensive and not widely applicable are preimplantation and preconception diagnosis. The recent successful studies of fetal DNA in maternal plasma may allow future prenatal diagnosis that is noninvasive for the fetus.

  20. On Machine Capacitance Dimensional and Surface Profile Measurement System

    NASA Technical Reports Server (NTRS)

    Resnick, Ralph

    1993-01-01

    A program was awarded under the Air Force Machine Tool Sensor Improvements Program Research and Development Announcement to develop and demonstrate the use of a Capacitance Sensor System including Capacitive Non-Contact Analog Probe and a Capacitive Array Dimensional Measurement System to check the dimensions of complex shapes and contours on a machine tool or in an automated inspection cell. The manufacturing of complex shapes and contours and the subsequent verification of those manufactured shapes is fundamental and widespread throughout industry. The critical profile of a gear tooth; the overall shape of a graphite EDM electrode; the contour of a turbine blade in a jet engine; and countless other components in varied applications possess complex shapes that require detailed and complex inspection procedures. Current inspection methods for complex shapes and contours are expensive, time-consuming, and labor intensive.

Some links on this page may take you to non-federal websites. Their policies may differ from this site.
Top