Quantification and Compensation of Eddy-Current-Induced Magnetic Field Gradients

PubMed Central

Spees, William M.; Buhl, Niels; Sun, Peng; Ackerman, Joseph J.H.; Neil, Jeffrey J.; Garbow, Joel R.

2011-01-01

Two robust techniques for quantification and compensation of eddy-current-induced magnetic-field gradients and static magnetic-field shifts (ΔB0) in MRI systems are described. Purpose-built 1-D or 6-point phantoms are employed. Both procedures involve measuring the effects of a prior magnetic-field-gradient test pulse on the phantom’s free induction decay (FID). Phantom-specific analysis of the resulting FID data produces estimates of the time-dependent, eddy-current-induced magnetic field gradient(s) and ΔB0 shift. Using Bayesian methods, the time dependencies of the eddy-current-induced decays are modeled as sums of exponentially decaying components, each defined by an amplitude and time constant. These amplitudes and time constants are employed to adjust the scanner’s gradient pre-emphasis unit and eliminate undesirable eddy-current effects. Measurement with the six-point sample phantom allows for simultaneous, direct estimation of both on-axis and cross-term eddy-current-induced gradients. The two methods are demonstrated and validated on several MRI systems with actively-shielded gradient coil sets. PMID:21764614

Quantification and compensation of eddy-current-induced magnetic-field gradients.

PubMed

Spees, William M; Buhl, Niels; Sun, Peng; Ackerman, Joseph J H; Neil, Jeffrey J; Garbow, Joel R

2011-09-01

Two robust techniques for quantification and compensation of eddy-current-induced magnetic-field gradients and static magnetic-field shifts (ΔB0) in MRI systems are described. Purpose-built 1-D or six-point phantoms are employed. Both procedures involve measuring the effects of a prior magnetic-field-gradient test pulse on the phantom's free induction decay (FID). Phantom-specific analysis of the resulting FID data produces estimates of the time-dependent, eddy-current-induced magnetic field gradient(s) and ΔB0 shift. Using Bayesian methods, the time dependencies of the eddy-current-induced decays are modeled as sums of exponentially decaying components, each defined by an amplitude and time constant. These amplitudes and time constants are employed to adjust the scanner's gradient pre-emphasis unit and eliminate undesirable eddy-current effects. Measurement with the six-point sample phantom allows for simultaneous, direct estimation of both on-axis and cross-term eddy-current-induced gradients. The two methods are demonstrated and validated on several MRI systems with actively-shielded gradient coil sets. Copyright © 2011 Elsevier Inc. All rights reserved.

New Definitions for Employment and Unemployment.

ERIC Educational Resources Information Center

Stein, Robert L.

1967-01-01

Improvements in methods for measuring employment and unemployment that went into effect in January 1967, new definitions, and comparisons of data collected by the Current Population Survey (CPS) and the new Monthly Labor Survey (MLS) are presented. The improvements are in line with the recommendations of the Gordon Committee in its 1962 report.…

Occupational lead poisoning: who should conduct surveillance and training?

PubMed

Keogh, J P; Gordon, J

1994-11-01

This commentary challenges the current employer-controlled model for delivering occupational health services. Problems emanating from traditional employer-based medical surveillance and worker education programs for occupational lead poisoning are identified. A new public health model for delivering these services is proposed. This model utilizes a case-based and hazard-based method for bringing workplaces and employers into the program and features direct delivery of surveillance and training services by public health agencies.

Ten Inquiry Methods Used in Curriculum Studies.

ERIC Educational Resources Information Center

Short, Edmund C.

Ten different methods of inquiry are outlined in this overview of research methodologies currently being employed in the field of curriculum studies: (1) philosophical, (2) historical, (3) scientific, (4) artistic, (5) moral, (6) religious, (7) interpretive, (8) instrumental, (9) deliberative, and (10) action oriented. Each of the 10 methods is…

The Use of Fractionation Scales for Communication Audits.

ERIC Educational Resources Information Center

Barnett, George A.; And Others

A study investigated a new method of measuring organizational communication other than the audit methods currently in use. The method, which employs fractionation procedures, was used with workers from five different business groups within a large multinational corporation. The results showed that: (1) workers could use the scales reliably, (2)…

Graduate Faculty Perceptions of Experiential Learning Activities in Multicultural Classrooms

ERIC Educational Resources Information Center

Su, Yu-Han

2012-01-01

Current graduate programs employ many effective teaching methods. One of these methods, using experiential learning activities (Lee & Caffarella, 1994) in class, includes the subcomponents of cooperative learning, self-directed learning, and active learning. While these methods are commonly used, not much scholarly literature has examined the…

Paying for Retirement: Sex Differences in Inclusion in Employer-Provided Retirement Plans

ERIC Educational Resources Information Center

Wright, Rosemary

2012-01-01

Purpose: This study examines sex differences among Baby Boom workers in the likelihood of coverage by an employer-provided retirement plan. Design and Methods: This study used a sample of Baby Boom workers drawn from the 2009 Current Population Survey. Independent variables were selected to replicate as closely as possible those in two 1995…

21 CFR 184.1005 - Acetic acid.

Code of Federal Regulations, 2014 CFR

2014-04-01

... synthesis. The principal synthetic methods currently employed are oxidation of acetaldehyde derived from ethylene, liquid phase oxidation of butane, and reaction of carbon monoxide with methanol derived from...

Method and apparatus for controlling electroslag remelting

DOEpatents

Maguire, Michael C.; Zanner, Frank J.; Damkroger, Brian K.; Miszkiel, Mark E.; Aronson, Eugene A.

1994-01-01

Method and apparatus for controlling electrode immersion depth in an electroslag remelting furnace. The phase difference of the alternating current circuit established in the furnace is calculated in real time and employed to more accurately control immersion depth than possible with voltage-swing systems.

Fiber Optic Handpiece Illumination Systems

DTIC Science & Technology

1989-01-01

only available from the manufacturer. Method of Light Activation Three systems are currently employed: 1. Handpiece Air Pressure Switch . The...Average Easy 3. Type of lamp (note brand and part #): 4. Method of light activation: Touch Air pressure Switch 5. Will it activate while the operator

Rapid extraction of virus-contaminated hemocytes from oysters

USDA-ARS?s Scientific Manuscript database

Rapid viral detection methods are necessary to employ diagnostic testing for viral contamination in shellfish to prevent and control foodborne illness. Current shellfish viral RNA extraction methods, which are time-consuming and not applicable for routine monitoring, require the testing of whole or ...

Method and apparatus to trigger superconductors in current limiting devices

DOEpatents

Yuan, Xing; Hazelton, Drew Willard; Walker, Michael Stephen

2004-10-26

A method and apparatus for magnetically triggering a superconductor in a superconducting fault current limiter to transition from a superconducting state to a resistive state. The triggering is achieved by employing current-carrying trigger coil or foil on either or both the inner diameter and outer diameter of a superconductor. The current-carrying coil or foil generates a magnetic field with sufficient strength and the superconductor is disposed within essentially uniform magnetic field region. For superconductor in a tubular-configured form, an additional magnetic field can be generated by placing current-carrying wire or foil inside the tube and along the center axial line.

Research on simulation based material delivery system for an automobile company with multi logistics center

NASA Astrophysics Data System (ADS)

Luo, D.; Guan, Z.; Wang, C.; Yue, L.; Peng, L.

2017-06-01

Distribution of different parts to the assembly lines is significant for companies to improve production. Current research investigates the problem of distribution method optimization of a logistics system in a third party logistic company that provide professional services to an automobile manufacturing case company in China. Current research investigates the logistics leveling the material distribution and unloading platform of the automobile logistics enterprise and proposed logistics distribution strategy, material classification method, as well as logistics scheduling. Moreover, the simulation technology Simio is employed on assembly line logistics system which helps to find and validate an optimization distribution scheme through simulation experiments. Experimental results indicate that the proposed scheme can solve the logistic balance and levels the material problem and congestion of the unloading pattern in an efficient way as compared to the original method employed by the case company.

Real-time point-of-care measurement of impaired renal function in a rat acute injury model employing exogenous fluorescent tracer agents

NASA Astrophysics Data System (ADS)

Dorshow, Richard B.; Fitch, Richard M.; Galen, Karen P.; Wojdyla, Jolette K.; Poreddy, Amruta R.; Freskos, John N.; Rajagopalan, Raghavan; Shieh, Jeng-Jong; Demirjian, Sevag G.

2013-02-01

Renal function assessment is needed for the detection of acute kidney injury and chronic kidney disease. Glomerular filtration rate (GFR) is now widely accepted as the best indicator of renal function, and current clinical guidelines advocate its use in the staging of kidney disease. The optimum measure of GFR is by the use of exogenous tracer agents. However current clinically employed agents lack sensitivity or are cumbersome to use. An exogenous GFR fluorescent tracer agent, whose elimination rate could be monitored noninvasively through skin would provide a substantial improvement over currently available methods. We developed a series of novel aminopyrazine analogs for use as exogenous fluorescent GFR tracer agents that emit light in the visible region for monitoring GFR noninvasively over skin. In rats, these compounds are eliminated by the kidney with urine recovery greater than 90% of injected dose, are not broken down or metabolized in vivo, are not secreted by the renal tubules, and have clearance values similar to a GFR reference compound, iothalamate. In addition, biological half-life of these compounds measured in rats by noninvasive optical methods correlated with plasma derived methods. In this study, we show that this noninvasive methodology with our novel fluorescent tracer agents can detect impaired renal function. A 5/6th nephrectomy rat model is employed.

21 CFR 184.1005 - Acetic acid.

Code of Federal Regulations, 2012 CFR

2012-04-01

... carbohydrates or by organic synthesis. The principal synthetic methods currently employed are oxidation of acetaldehyde derived from ethylene, liquid phase oxidation of butane, and reaction of carbon monoxide with...

21 CFR 184.1005 - Acetic acid.

Code of Federal Regulations, 2013 CFR

2013-04-01

... carbohydrates or by organic synthesis. The principal synthetic methods currently employed are oxidation of acetaldehyde derived from ethylene, liquid phase oxidation of butane, and reaction of carbon monoxide with...

How Learning Designs, Teaching Methods and Activities Differ by Discipline in Australian Universities

ERIC Educational Resources Information Center

Cameron, Leanne

2017-01-01

This paper reports on the learning designs, teaching methods and activities most commonly employed within the disciplines in six universities in Australia. The study sought to establish if there were significant differences between the disciplines in learning designs, teaching methods and teaching activities in the current Australian context, as…

A Method of Maximum Power Control in Single-phase Utility Interactive Photovoltaic Generation System by using PWM Current Source Inverter

NASA Astrophysics Data System (ADS)

Neba, Yasuhiko

This paper deals with a maximum power point tracking (MPPT) control of the photovoltaic generation with the single-phase utility interactive inverter. The photovoltaic arrays are connected by employing the PWM current source inverter to the utility. The use of the pulsating dc current and voltage allows the maximum power point to be searched. The inverter can regulate the array voltage and keep the arrays to the maximum power. This paper gives the control method and the experimental results.

Methods for determining optical power, for power-normalizing laser measurements, and for stabilizing power of lasers via compliance voltage sensing

DOEpatents

Taubman, Matthew S; Phillips, Mark C

2015-04-07

A method is disclosed for power normalization of spectroscopic signatures obtained from laser based chemical sensors that employs the compliance voltage across a quantum cascade laser device within an external cavity laser. The method obviates the need for a dedicated optical detector used specifically for power normalization purposes. A method is also disclosed that employs the compliance voltage developed across the laser device within an external cavity semiconductor laser to power-stabilize the laser mode of the semiconductor laser by adjusting drive current to the laser such that the output optical power from the external cavity semiconductor laser remains constant.

Sulfates in Indiana substrates.

DOT National Transportation Integrated Search

2016-06-01

This study was undertaken to develop modifications for improving cost and time efficiencies without sacrificing accuracy and precision to : the current method employed by the Indiana Department of Transportation (INDOT) for determining sulfate conten...

Reef Fish Survey Techniques: Assessing the Potential for Standardizing Methodologies.

PubMed

Caldwell, Zachary R; Zgliczynski, Brian J; Williams, Gareth J; Sandin, Stuart A

2016-01-01

Dramatic changes in populations of fishes living on coral reefs have been documented globally and, in response, the research community has initiated efforts to assess and monitor reef fish assemblages. A variety of visual census techniques are employed, however results are often incomparable due to differential methodological performance. Although comparability of data may promote improved assessment of fish populations, and thus management of often critically important nearshore fisheries, to date no standardized and agreed-upon survey method has emerged. This study describes the use of methods across the research community and identifies potential drivers of method selection. An online survey was distributed to researchers from academic, governmental, and non-governmental organizations internationally. Although many methods were identified, 89% of survey-based projects employed one of three methods-belt transect, stationary point count, and some variation of the timed swim method. The selection of survey method was independent of the research design (i.e., assessment goal) and region of study, but was related to the researcher's home institution. While some researchers expressed willingness to modify their current survey protocols to more standardized protocols (76%), their willingness decreased when methodologies were tied to long-term datasets spanning five or more years. Willingness to modify current methodologies was also less common among academic researchers than resource managers. By understanding both the current application of methods and the reported motivations for method selection, we hope to focus discussions towards increasing the comparability of quantitative reef fish survey data.

Investigation and Analysis of Vocational Education for Chinese Migrant Workers of New Generation--Reflection from a Special Investigation in F City

ERIC Educational Resources Information Center

Zhuoxin, Liang

2013-01-01

The research has chosen some migrant workers of new generation from different fields in F City to investigate their current situation of vocational education. The research reveals that their education is helpful, mainly in employment, work and the methods of mentorship and further study organized by employers. The research also reveals its…

Predictive Model Development for Aviation Black Carbon Mass Emissions from Alternative and Conventional Fuels at Ground and Cruise.

PubMed

Abrahamson, Joseph P; Zelina, Joseph; Andac, M Gurhan; Vander Wal, Randy L

2016-11-01

The first order approximation (FOA3) currently employed to estimate BC mass emissions underpredicts BC emissions due to inaccuracies in measuring low smoke numbers (SNs) produced by modern high bypass ratio engines. The recently developed Formation and Oxidation (FOX) method removes the need for and hence uncertainty associated with (SNs), instead relying upon engine conditions in order to predict BC mass. Using the true engine operating conditions from proprietary engine cycle data an improved FOX (ImFOX) predictive relation is developed. Still, the current methods are not optimized to estimate cruise emissions nor account for the use of alternative jet fuels with reduced aromatic content. Here improved correlations are developed to predict engine conditions and BC mass emissions at ground and cruise altitude. This new ImFOX is paired with a newly developed hydrogen relation to predict emissions from alternative fuels and fuel blends. The ImFOX is designed for rich-quench-lean style combustor technologies employed predominately in the current aviation fleet.

How Much Do Our Students Learn by Attending Lectures?

ERIC Educational Resources Information Center

Sistek, Vladimir

Considerations that affect the type of teaching method employed in undergraduate studies and medical schools are addressed, with attention to the current emphasis on the lecture method and alternative educational experiences that require students to be active, independent learners and problem solvers. Perceived academic priorities and the…

Changing the Latitudes and Attitudes about Content Analysis Research

ERIC Educational Resources Information Center

Brank, Eve M.; Fox, Kathleen A.; Youstin, Tasha J.; Boeppler, Lee C.

2008-01-01

The current research employs the use of content analysis to teach research methods concepts among students enrolled in an upper division research methods course. Students coded and analyzed Jimmy Buffett song lyrics rather than using a downloadable database or collecting survey data. Students' knowledge of content analysis concepts increased after…

Reduction, analysis, and properties of electric current systems in solar active regions

NASA Technical Reports Server (NTRS)

Gary, G. Allen; Demoulin, Pascal

1995-01-01

The specific attraction and, in large part, the significance of solar magnetograms lie in the fact that they give the most important data on the electric currents and the nonpotentiality of active regions. Using the vector magnetograms from the Marshall Space Flight Center (MSFC), we employ a unique technique in the area of data analysis for resolving the 180 deg ambiguity in order to calculate the spatial structure of the vertical electric current density. The 180 deg ambiguity is resolved by applying concepts from the nonlinear multivariable optimization theory. The technique is shown to be of particular importance in very nonpotential active regions. The characterization of the vertical electric current density for a set of vector magnetograms using this method then gives the spatial scale, locations, and magnitude of these current systems. The method, which employs an intermediate parametric function which covers the magnetogram and which defines the local `preferred' direction, minimizes a specific functional of the observed transverse magnetic field. The specific functional that is successful is the integral of the square of the vertical current density. We find that the vertical electric current densities have common characteristics for the extended bipolar (beta) (gamma) (delta)-regions studied. The largest current systems have j(sub z)'s which maximizes around 30 mA/sq m and have a linear decreasing distribution to a diameter of 30 Mn.

Reduction, Analysis, and Properties of Electric Current Systems in Solar Active Regions

NASA Technical Reports Server (NTRS)

Gary, G. Allen; Demoulin, Pascal

1995-01-01

The specific attraction and, in large part, the significance of solar vector magnetograms lie in the fact that they give the most important data on the electric currents and the nonpotentiality of active regions. Using the vector magnetograms from the Marshall Space Flight Center (MSFC), we employ a unique technique in the area of data analysis for resolving the 180 degree ambiguity in order to calculate the spatial structure of the vertical electric current density. The 180 degree ambiguity is resolved by applying concepts from the nonlinear multivariable optimization theory. The technique is shown to be of particular importance in very nonpotential active regions. The characterization of the vertical electric current density for a set of vector magnetograms using this method then gives the spatial scale, locations, and magnitude of these current systems. The method, which employs an intermediate parametric function which covers the magnetogram and which defines the local "preferred" direction, minimizes a specific functional of the observed transverse magnetic field. The specific functional that is successful is the integral of the square of the vertical current density. We find that the vertical electric current densities have common characteristics for the extended bipolar beta gamma delta-regions studied. The largest current systems have j(sub z)'s which maximizes around 30 mA per square meter and have a linear decreasing distribution to a diameter of 30 Mm.

Screening Workers: An Examination and Analysis of Practice and Public Policy.

ERIC Educational Resources Information Center

Greenfield, Patricia A.; And Others

1989-01-01

Discusses methods of screening job applicants and issues raised by screening procedures.. Includes legal ramifications, current practices in Britain and the United States, future directions, and the employment interview. (JOW)

Pre-Service Science Teachers' Perception of the Principles of Scientific Research

ERIC Educational Resources Information Center

Can, Sendil; Kaymakci, Güliz

2016-01-01

The purpose of the current study employing the survey method is to determine the pre-service science teachers' perceptions of the principles of scientific research and to investigate the effects of gender, grade level and the state of following scientific publications on their perceptions. The sampling of the current research is comprised of 125…

Communicating Risk with Parents: Exploring the Methods and Beliefs of Outdoor Education Coordinators in Victoria, Australia

ERIC Educational Resources Information Center

Dallat, Clare

2009-01-01

This paper examines the risk communication strategies currently being employed by seven outdoor education co-ordinators in Government schools in Victoria, Australia. Of particular interest are the beliefs and assumptions held by these co-ordinators in relation to communicating risk with parents. Current policy stipulates that parents must be…

Spectral functions at small energies and the electrical conductivity in hot quenched lattice QCD.

PubMed

Aarts, Gert; Allton, Chris; Foley, Justin; Hands, Simon; Kim, Seyong

2007-07-13

In lattice QCD, the maximum entropy method can be used to reconstruct spectral functions from Euclidean correlators obtained in numerical simulations. We show that at finite temperature the most commonly used algorithm, employing Bryan's method, is inherently unstable at small energies and gives a modification that avoids this. We demonstrate this approach using the vector current-current correlator obtained in quenched QCD at finite temperature. Our first results indicate a small electrical conductivity above the deconfinement transition.

System and method employing a self-organizing map load feature database to identify electric load types of different electric loads

DOEpatents

Lu, Bin; Harley, Ronald G.; Du, Liang; Yang, Yi; Sharma, Santosh K.; Zambare, Prachi; Madane, Mayura A.

2014-06-17

A method identifies electric load types of a plurality of different electric loads. The method includes providing a self-organizing map load feature database of a plurality of different electric load types and a plurality of neurons, each of the load types corresponding to a number of the neurons; employing a weight vector for each of the neurons; sensing a voltage signal and a current signal for each of the loads; determining a load feature vector including at least four different load features from the sensed voltage signal and the sensed current signal for a corresponding one of the loads; and identifying by a processor one of the load types by relating the load feature vector to the neurons of the database by identifying the weight vector of one of the neurons corresponding to the one of the load types that is a minimal distance to the load feature vector.

Arbitrary Lagrangian-Eulerian Method with Local Structured Adaptive Mesh Refinement for Modeling Shock Hydrodynamics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Anderson, R W; Pember, R B; Elliott, N S

2001-10-22

A new method that combines staggered grid Arbitrary Lagrangian-Eulerian (ALE) techniques with structured local adaptive mesh refinement (AMR) has been developed for solution of the Euler equations. This method facilitates the solution of problems currently at and beyond the boundary of soluble problems by traditional ALE methods by focusing computational resources where they are required through dynamic adaption. Many of the core issues involved in the development of the combined ALEAMR method hinge upon the integration of AMR with a staggered grid Lagrangian integration method. The novel components of the method are mainly driven by the need to reconcile traditionalmore » AMR techniques, which are typically employed on stationary meshes with cell-centered quantities, with the staggered grids and grid motion employed by Lagrangian methods. Numerical examples are presented which demonstrate the accuracy and efficiency of the method.« less

Error measure comparison of currently employed dose-modulation schemes for e-beam proximity effect control

NASA Astrophysics Data System (ADS)

Peckerar, Martin C.; Marrian, Christie R.

1995-05-01

Standard matrix inversion methods of e-beam proximity correction are compared with a variety of pseudoinverse approaches based on gradient descent. It is shown that the gradient descent methods can be modified using 'regularizers' (terms added to the cost function minimized during gradient descent). This modification solves the 'negative dose' problem in a mathematically sound way. Different techniques are contrasted using a weighted error measure approach. It is shown that the regularization approach leads to the highest quality images. In some cases, ignoring negative doses yields results which are worse than employing an uncorrected dose file.

Physiological Markers of Anxiety Are Increased in Children of Abused Mothers

ERIC Educational Resources Information Center

Jovanovic, Tanja; Smith, Ami; Kamkwalala, Asante; Poole, James; Samples, Tara; Norrholm, Seth D.; Ressler, Kerry J.; Bradley, Bekh

2011-01-01

Background: A growing number of studies indicate that low income, African American men and women living in urban environments are at high risk for trauma exposure, which may have intergenerational effects. The current study employed psychophysiological methods to describe biomarkers of anxiety in children of traumatized mothers. Methods: Study…

The Preparedness of Preservice Secondary Mathematics Teachers to Teach Statistics: A Cross-Institutional Mixed Methods Study

ERIC Educational Resources Information Center

Lovett, Jennifer Nickell

2016-01-01

The purpose of this study is to provide researchers, mathematics educators, and statistics educators information about the current state of preservice secondary mathematics teachers' preparedness to teach statistics. To do so, this study employed an explanatory mixed methods design to quantitatively examine the statistical knowledge and statistics…

Analytical modeling and analysis of magnetic field and torque for novel axial flux eddy current couplers with PM excitation

NASA Astrophysics Data System (ADS)

Li, Zhao; Wang, Dazhi; Zheng, Di; Yu, Linxin

2017-10-01

Rotational permanent magnet eddy current couplers are promising devices for torque and speed transmission without any mechanical contact. In this study, flux-concentration disk-type permanent magnet eddy current couplers with double conductor rotor are investigated. Given the drawback of the accurate three-dimensional finite element method, this paper proposes a mixed two-dimensional analytical modeling approach. Based on this approach, the closed-form expressions of magnetic field, eddy current, electromagnetic force and torque for such devices are obtained. Finally, a three-dimensional finite element method is employed to validate the analytical results. Besides, a prototype is manufactured and tested for the torque-speed characteristic.

Employment status, working conditions and depressive symptoms among German employees born in 1959 and 1965.

PubMed

Burr, Hermann; Rauch, Angela; Rose, Uwe; Tisch, Anita; Tophoven, Silke

2015-08-01

We investigated whether (1) current employment status (regular full-time, regular part-time and marginal employment) is associated with depressive symptoms and (2) whether these associations are mediated by current working conditions and previous employment history. Two cohorts of German employees aged 46 and 52 years were selected from administrative data of the German Federal Employment Agency and answered questions about depressive symptoms (we use an applied version of BDI-V) and their current working conditions. In addition, the participants gave written consent to link register data regarding their employment histories (n = 4,207). Multiple linear regression analyses were conducted. Men experienced elevated depressive symptoms when working regular part-time; women experienced such symptoms when engaged in marginal employment. These associations decreased when we adjusted for job insecurity and rose slightly when we adjusted for leadership quality. Men and women who reported a low level of influence at work showed a higher risk of depressive symptoms. For women, the association between current employment position and depressive symptoms could be partly explained by low levels of influence at work. For men, the association between depressive symptoms and current regular part-time employment decreased when we adjusted for previous part-time employment. Conversely, for women, the association with depressive symptoms increased in current regular part-time and marginal employment when we adjusted for employment history. In both genders, the observed associations between depressive symptoms and current employment status were mediated by both current psychosocial conditions and employment history. Employees not having a regular full-time job differed from full-time employees with respect to both their current working conditions and their employment history.

Is there an occupational therapy employment crisis within Australia? An investigation into two consecutive cohorts of occupational therapy graduates from a single Victorian University identifying trends in employment.

PubMed

Fay, Pearse; Adamson, Lynne

2017-12-01

Within the context of growing concerns about a potential oversupply of occupational therapist, this research examines when, where and how long new graduates take to gain employment and identifies influences upon the health and university systems. A mixed method research design, using an online survey was adopted to investigate the topic. Two consecutive cohorts of graduates from a single university program were invited to participate. Seventy-five (58%) responses were received, with 63 (84%) currently employed in an occupational therapy role. Of the 12 (16%) not employed, only 3 (4%) described themselves as actively seeking employment in an occupational therapy role. A wide spread of employment settings and scope of practice areas was reported. Findings suggest that occupational therapy graduates are gaining employment in a range of settings and practice areas, relatively quickly. This research adds evidence to the conversation around graduate employment within a region of Australia. The Australian population, health system and university changes are possible factors influencing employment. The research reveals the difficulties in understanding the current situation with limitations in data collected, varied terminology and an ever changing job seeking environment. The research provides a starting point for the occupational therapy profession to further understand the directions the profession is taking. University programs may also benefit by using the research to tailor course content to assist graduates in gaining employment or to present students with the prospects of new employment opportunities. © 2017 Occupational Therapy Australia.

Effectiveness of Individual Placement and Support Supported Employment for Young Adults

PubMed Central

Bond, Gary R.; Drake, Robert E.; Campbell, Kikuko

2015-01-01

Objective The Individual Placement and Support (IPS) model of supported employment was first developed in community mental health centers for adults with severe mental illness. While IPS is an established evidence-based practice in this broad population, evidence on its effectiveness focused specifically on young adults has been limited. The current study aimed to address this gap. Methods To investigate the effects of IPS on young adults, the authors conducted a secondary analysis on a pooled sample of 109 unemployed young adults (under age 30) from four randomized controlled trials employing a common research protocol that included a standardized measurement battery and rigorous fidelity monitoring. Researchers assessed these participants over 18 months on nine competitive employment outcome measures. Results On all measures the IPS group had significantly better employment outcomes. Overall, 40 (82%) of IPS participants obtained employment during follow-up compared to 25 (42%) of control participants, Χ2 =17.9, p < .001. IPS participants averaged 25.0 weeks of employment, compared to 7.0 weeks for control participants, t = 4.50, p < .001. Conclusions The current analysis supports a small number of previous studies in showing that IPS is highly effective in helping young adults to attain competitive employment. When young adults acquire competitive jobs and initiate a path toward normal adult roles, they may avoid the cycle of disability and psychiatric patient roles that are demeaning and demoralizing. PMID:25138195

Silver-based Antibacterial Surfaces for Drinking Water Disinfection - An overview

EPA Science Inventory

Risks associated with current disinfection techniques, including the formation of disinfection by-products and multi-drug resistant bacterial species, have prompted the exploration of advanced disinfection methods. One such technique employs silver nanoparticles incorporation on ...

The American Society for Aesthetic Plastic Surgery (ASAPS) survey: current trends in liposuction.

PubMed

Ahmad, Jamil; Eaves, Felmont F; Rohrich, Rod J; Kenkel, Jeffrey M

2011-02-01

The emergence of new technologies necessitates a study of current trends in liposuction and other methods for fat removal. The American Society for Aesthetic Plastic Surgery (ASAPS) conducted a survey of its members to gain valuable information from Board-certified plastic surgeons about their experience with new technologies for fat removal and managing complications after liposuction. The ASAPS Current Trends in Liposuction Survey was emailed to 1713 ASAPS members. Data were tabulated and examined to determine current trends in liposuction and other fat removal techniques performed by ASAPS members. The response rate for the survey was 28.7% (n = 492). Most ASAPS respondents reported performing between 50 and 100 liposuction procedures annually. Most plastic surgeons currently employ or have previous experience with suction-assisted lipectomy/liposuction (SAL), ultrasound-assisted liposuction (UAL), and power-assisted liposuction, but fewer reported experience with laser-assisted liposuction (LAL), mesotherapy, or external, noninvasive devices. SAL was the preferred method of fat removal for 51.4%. UAL, LAL, and SAL were most commonly associated with complications. Only 10.5% of ASAPS members employ LAL; 38% have treated a patient with complications secondary to LAL. Valuable information about current trends in liposuction and other fat removal techniques has been gained from this survey. Although many studies have been published that review issues related to safety, morbidity, aesthetics, and recovery after different methods of fat removal, more prospective studies with standardized objective outcome measures comparing these techniques, particularly newer modalities, are needed to continue improving safety-related standards of care.

Remaining dischargeable time prediction for lithium-ion batteries using unscented Kalman filter

NASA Astrophysics Data System (ADS)

Dong, Guangzhong; Wei, Jingwen; Chen, Zonghai; Sun, Han; Yu, Xiaowei

2017-10-01

To overcome the range anxiety, one of the important strategies is to accurately predict the range or dischargeable time of the battery system. To accurately predict the remaining dischargeable time (RDT) of a battery, a RDT prediction framework based on accurate battery modeling and state estimation is presented in this paper. Firstly, a simplified linearized equivalent-circuit-model is developed to simulate the dynamic characteristics of a battery. Then, an online recursive least-square-algorithm method and unscented-Kalman-filter are employed to estimate the system matrices and SOC at every prediction point. Besides, a discrete wavelet transform technique is employed to capture the statistical information of past dynamics of input currents, which are utilized to predict the future battery currents. Finally, the RDT can be predicted based on the battery model, SOC estimation results and predicted future battery currents. The performance of the proposed methodology has been verified by a lithium-ion battery cell. Experimental results indicate that the proposed method can provide an accurate SOC and parameter estimation and the predicted RDT can solve the range anxiety issues.

Comparison of Information Dissemination Methods in Inle Lake: A Lesson for Reconsidering Framework for Environmental Education Strategies

ERIC Educational Resources Information Center

Oo, Htun Naing; Sutheerawatthana, Pitch; Minato, Takayuki

2010-01-01

This article analyzes the practice of information dissemination regarding pesticide usage in floating gardening in a rural area. The analysis reveals reasons why the current information dissemination methods employed by relevant stakeholders do not work. It then puts forward a proposition that information sharing within organizations of and among…

Robotics in cardiac surgery.

PubMed

Vassiliades, Thomas A

2006-03-01

The current status of surgical telemanipulators in the field of cardiac surgery is best described as a device in search of applications, as its role has not been clearly defined. Basic robotic technological research and development needs to focus on two key areas: (a) developing methods for modeling patient and surgical procedures with the ability to employ that customized information in the successful completion of a minimally invasive operation; and (b) developing novel human machine interactions that can overcome the barriers we currently face in performing surgical tasks using telemanipulators. Significant breakthroughs in these areas will then facilitate the construction and employment of enabling robotic systems, each with its specific clinical application. Copyright 2006 John Wiley & Sons, Ltd.

Measurement of toroidal vessel eddy current during plasma disruption on J-TEXT.

PubMed

Liu, L J; Yu, K X; Zhang, M; Zhuang, G; Li, X; Yuan, T; Rao, B; Zhao, Q

2016-01-01

In this paper, we have employed a thin, printed circuit board eddy current array in order to determine the radial distribution of the azimuthal component of the eddy current density at the surface of a steel plate. The eddy current in the steel plate can be calculated by analytical methods under the simplifying assumptions that the steel plate is infinitely large and the exciting current is of uniform distribution. The measurement on the steel plate shows that this method has high spatial resolution. Then, we extended this methodology to a toroidal geometry with the objective of determining the poloidal distribution of the toroidal component of the eddy current density associated with plasma disruption in a fusion reactor called J-TEXT. The preliminary measured result is consistent with the analysis and calculation results on the J-TEXT vacuum vessel.

Method for making high-critical-current-density YBa.sub.2 Cu.sub.3 O.sub.7 superconducting layers on metallic substrates

DOEpatents

Feenstra, Roeland; Christen, David; Paranthaman, Mariappan

1999-01-01

A method is disclosed for fabricating YBa.sub.2 Cu.sub.3 O.sub.7 superconductor layers with the capability of carrying large superconducting currents on a metallic tape (substrate) supplied with a biaxially textured oxide buffer layer. The method represents a simplification of previously established techniques and provides processing requirements compatible with scale-up to long wire (tape) lengths and high processing speeds. This simplification has been realized by employing the BaF.sub.2 method to grow a YBa.sub.2 Cu.sub.3 O.sub.7 film on a metallic substrate having a biaxially textured oxide buffer layer.

Nondestructive detection of an undesirable metallic phase, T.sub.1, during processing of aluminum-lithium alloys

DOEpatents

Buck, Otto; Bracci, David J.; Jiles, David C.; Brasche, Lisa J. H.; Shield, Jeffrey E.; Chumbley, Leonard S.

1990-08-07

A method is disclosed for detecting the T.sub.1 phase in aluminum-lithium alloys through simultaneous measurement of conductivity and hardness. In employing eddy current to measure conductivity, when the eddy current decreases with aging of the alloy, while the hardness of the material continues to increase, the presence of the T.sub.1 phase may be detected.

Teachers' Opinions about Professional Development Schools=Ögretmenlerin Mesleki Gelisim Okullarina Iliskin Görüsleri

ERIC Educational Resources Information Center

Ulubey, Özgür; Yildirim, Kasim; Alpaslan, Muhammet Mustafa; Aykaç, Necdet

2017-01-01

The purpose of the current study is to determine teachers' opinions about professional development schools. In the current study; one of the mixed methods, the convergent design was employed. The sampling of the quantitative dimension of the study is comprised of 256 teachers working in 21 elementary and secondary schools in the city of Mugla. The…

The employment environment for youth in rural South Africa: A mixed-methods study

PubMed Central

Wilkinson, Andra; Pettifor, Audrey; Rosenberg, Molly; Halpern, Carolyn; Thirumurthy, Harsha; Collinson, Mark A.; Kahn, Kathleen

2016-01-01

South Africa has high youth unemployment. This paper examines the predictors of youth employment in rural Agincourt, Mpumalanga Province. A survey of 187 out-of-school 18–24 year olds found only 12% of women and 38% of men were currently employed. Men with skills/training were significantly more likely to report employment, mostly physical labour (aOR: 4.5; CI: 1.3, 15.3). In-depth interviews with 14 of the youth revealed women are perceived more suitable for formal employment, which is scarce informing why women were more likely to pursue further education and yet less likely to be employed. Ten key informants from local organisations highlighted numerous local youth employment resources while, in contrast, all youth in the sample said no resources were available, highlighting a need for the organisations to extend their services into rural areas. As these services are focused on entrepreneurship, programs to increase financial literacy and formal employment opportunities are also needed. PMID:28190915

The employment environment for youth in rural South Africa: A mixed-methods study.

PubMed

Wilkinson, Andra; Pettifor, Audrey; Rosenberg, Molly; Halpern, Carolyn; Thirumurthy, Harsha; Collinson, Mark A; Kahn, Kathleen

2017-01-01

South Africa has high youth unemployment. This paper examines the predictors of youth employment in rural Agincourt, Mpumalanga Province. A survey of 187 out-of-school 18-24 year olds found only 12% of women and 38% of men were currently employed. Men with skills/training were significantly more likely to report employment, mostly physical labour (aOR: 4.5; CI: 1.3, 15.3). In-depth interviews with 14 of the youth revealed women are perceived more suitable for formal employment, which is scarce informing why women were more likely to pursue further education and yet less likely to be employed. Ten key informants from local organisations highlighted numerous local youth employment resources while, in contrast, all youth in the sample said no resources were available, highlighting a need for the organisations to extend their services into rural areas. As these services are focused on entrepreneurship, programs to increase financial literacy and formal employment opportunities are also needed.

The Complexities of Family Caregiving at Work: A Mixed-Methods Study.

PubMed

Gaugler, Joseph E; Pestka, Deborah L; Davila, Heather; Sales, Rebecca; Owen, Greg; Baumgartner, Sarah A; Shook, Rocky; Cunningham, Jane; Kenney, Maureen

2018-01-01

The current project examined the impact of caregiving and caregiving-work conflict on employees' well-being. A sequential explanatory mixed-methods design (QUAN→qual) was utilized, and a total of 880 employees from a large health-care plan employer completed an online survey. Forty-five caregivers who completed the survey also participated in one of the five focus groups held 1 to 2 months later. Employed caregivers were significantly ( p < .05) more likely to indicate poorer physical and mental health than noncaregivers; among caregivers ( n = 370), caregiving-work conflict emerged as the most significant predictor of well-being and fully mediated the empirical relationship between burden and well-being. The focus group findings complemented the quantitative results; many of the challenges employed caregivers experience stem from their ability or inability to effectively balance their employment and caregiving roles. The results suggest the need to focus on caregiving-work conflict when constructing new or translating existing evidence-based caregiver interventions.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Suhendi, Endi; Syariati, Rifki; Noor, Fatimah A.

We modeled a tunneling current in a p-n junction based on armchair graphene nanoribbons (AGNRs) by using an Airy function approach (AFA) and a transfer matrix method (TMM). We used β-type AGNRs, in which its band gap energy and electron effective mass depends on its width as given by the extended Huckel theory. It was shown that the tunneling currents evaluated by employing the AFA are the same as those obtained under the TMM. Moreover, the calculated tunneling current was proportional to the voltage bias and inversely with temperature.

Measurement of thermal conductivity and thermal diffusivity using a thermoelectric module

NASA Astrophysics Data System (ADS)

Beltrán-Pitarch, Braulio; Márquez-García, Lourdes; Min, Gao; García-Cañadas, Jorge

2017-04-01

A proof of concept of using a thermoelectric module to measure both thermal conductivity and thermal diffusivity of bulk disc samples at room temperature is demonstrated. The method involves the calculation of the integral area from an impedance spectrum, which empirically correlates with the thermal properties of the sample through an exponential relationship. This relationship was obtained employing different reference materials. The impedance spectroscopy measurements are performed in a very simple setup, comprising a thermoelectric module, which is soldered at its bottom side to a Cu block (heat sink) and thermally connected with the sample at its top side employing thermal grease. Random and systematic errors of the method were calculated for the thermal conductivity (18.6% and 10.9%, respectively) and thermal diffusivity (14.2% and 14.7%, respectively) employing a BCR724 standard reference material. Although errors are somewhat high, the technique could be useful for screening purposes or high-throughput measurements at its current state. This new method establishes a new application for thermoelectric modules as thermal properties sensors. It involves the use of a very simple setup in conjunction with a frequency response analyzer, which provides a low cost alternative to most of currently available apparatus in the market. In addition, impedance analyzers are reliable and widely spread equipment, which facilities the sometimes difficult access to thermal conductivity facilities.

Exploring Individual and Structural Factors Associated with Employment Among Young Transgender Women of Color Using a No-Cost Transgender Legal Resource Center

PubMed Central

Hill, Brandon J.; Rosentel, Kris; Bak, Trevor; Silverman, Michael; Crosby, Richard; Salazar, Laura; Kipke, Michele

2017-01-01

Abstract Purpose: The purpose of this study was to explore individual and structural factors associated with employment among young transgender women (TW) of color. Methods: Sixty-five trans women of color were recruited from the Transgender Legal Defense and Education Fund to complete a 30-min interviewer-assisted survey assessing sociodemographics, housing, workplace discrimination, job-seeking self-efficacy, self-esteem, perceived public passability, and transactional sex work. Results: Logistic regression models revealed that stable housing (structural factor) and job-seeking self-efficacy (individual factor) were significantly associated with currently being employed. Conclusion: Our findings underscore the need for multilevel approaches to assist TW of color gain employment. PMID:28795154

The cleaning of ward floors and the bacteriological study of floor-cleaning machines

PubMed Central

Bate, J. G.

1961-01-01

Current trends in ward flooring materials and cleaning methods are considered from the point of view of the hospital bacteriologist. Methods employed in an investigation into the bacteriological safety of a number of floor-cleaning machines are described, and some considerations governing the choice of vacuum cleaners for ward use are discussed. Images PMID:13687726

Employing Design and Development Research (DDR): Approaches in the Design and Development of Online Arabic Vocabulary Learning Games Prototype

ERIC Educational Resources Information Center

Sahrir, Muhammad Sabri; Alias, Nor Aziah; Ismail, Zawawi; Osman, Nurulhuda

2012-01-01

The design and development research, first proposed by Brown and Collins in the 1990s, is currently among the well-known methods in educational research to test theory and validate its practicality. The method is also known as developmental research, design research, design-based research, formative research and design-cased and possesses…

A Case Study on Reducing Children's Screen Time: The Project of Screen Free Week

ERIC Educational Resources Information Center

Kara, Hatice Gözde Ertürk

2018-01-01

The current study aims to direct children to alternative activities within a week period by applying the project of screen free week to voluntary families. The ultimate aim of the study is to reduce children's screen time. The instrumental case study method; one of the qualitative research methods, was employed. Five children attending the…

A generalized method for determining radiation patterns of aperture antennas and its application to reflector antennas. M.S. Thesis

NASA Technical Reports Server (NTRS)

Paknys, J. R.

1982-01-01

The reflector antenna may be thought of as an aperture antenna. The classical solution for the radiation pattern of such an antenna is found by the aperture integration (AI) method. Success with this method depends on how accurately the aperture currents are known beforehand. In the past, geometrical optics (GO) has been employed to find the aperture currents. This approximation is suitable for calculating the main beam and possibly the first few sidelobes. A better approximation is to use aperture currents calculated from the geometrical theory of diffraction (GTD). Integration of the GTD currents over and extended aperture yields more accurate results for the radiation pattern. This approach is useful when conventional AI and GTD solutions have no common region of validity. This problem arises in reflector antennas. Two dimensional models of parabolic reflectors are studied; however, the techniques discussed can be applied to any aperture antenna.

Suicidal ideation, suicide attempt, and occupations among employed adults aged 18–64 years in the United States

PubMed Central

Han, Beth; Crosby, Alex E.; Ortega, LaVonne A.G.; Parks, Sharyn E.; Compton, Wilson M.; Gfroerer, Joseph

2016-01-01

Objective Approximately 70% of all US suicides are among working-age adults. This study was to determine whether and how 12-month suicidal ideation and suicide attempt were associated with specific occupations among currently employed adults aged 18–64 in the U.S. Methods Data were from 184,300 currently employed adults who participated in the 2008–2013 National Surveys on Drug Use and Health (NSDUH). NSDUH provides nationally representative data on suicidal ideation and suicide attempt. Descriptive analyses and multivariable logistic regressions were conducted. Results Among currently employed adults aged 18–64 in the U.S., 3.5% had suicidal ideation in the past 12 months (3.1% had suicidal ideation only, and 0.4% had suicidal ideation and attempted suicide). Compared with adults in farming, fishing, and forestry occupations (model adjusted prevalence (MAP) = 1.6%), adults in the following occupations were 3.0–3.6 times more likely to have suicidal ideation in the past year (model adjusted relative risks (MARRs) = 3.0–3.6): lawyers, judges, and legal support workers (MAP = 4.8%), social scientists and related workers (MAP = 5.4%), and media and communication workers (MAP = 5.8%). Conclusions Among employed adults aged 18–64 in the U.S., the 12-month prevalence of suicidal ideation varies by occupations. Adults in occupations that are at elevated risk for suicidal ideation may warrant focused suicide prevention. PMID:26995251

21 CFR 184.1005 - Acetic acid.

Code of Federal Regulations, 2011 CFR

2011-04-01

... carbohydrates or by organic synthesis. The principal synthetic methods currently employed are oxidation of acetaldehyde derived from ethylene, liquid phase oxidation of butane, and reaction of carbon monoxide with methanol derived from natural gas. (b) The ingredient meets the specifications of the Food Chemicals Codex...

What Small Firms Look for in New-Graduate Candidates.

ERIC Educational Resources Information Center

Pritchard, Constance J.; Fidler, Paul P.

1993-01-01

Surveyed 171 small organizations that employed professional-level staff to examine what managers of small organizations value in professional-level employees and how they recruit potential employees. Most frequent recruitment methods included personal referrals, classified ads, and referrals from current employees. (NB)

Applied Graph-Mining Algorithms to Study Biomolecular Interaction Networks

PubMed Central

2014-01-01

Protein-protein interaction (PPI) networks carry vital information on the organization of molecular interactions in cellular systems. The identification of functionally relevant modules in PPI networks is one of the most important applications of biological network analysis. Computational analysis is becoming an indispensable tool to understand large-scale biomolecular interaction networks. Several types of computational methods have been developed and employed for the analysis of PPI networks. Of these computational methods, graph comparison and module detection are the two most commonly used strategies. This review summarizes current literature on graph kernel and graph alignment methods for graph comparison strategies, as well as module detection approaches including seed-and-extend, hierarchical clustering, optimization-based, probabilistic, and frequent subgraph methods. Herein, we provide a comprehensive review of the major algorithms employed under each theme, including our recently published frequent subgraph method, for detecting functional modules commonly shared across multiple cancer PPI networks. PMID:24800226

Hybrid preconditioning for iterative diagonalization of ill-conditioned generalized eigenvalue problems in electronic structure calculations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cai, Yunfeng, E-mail: yfcai@math.pku.edu.cn; Department of Computer Science, University of California, Davis 95616; Bai, Zhaojun, E-mail: bai@cs.ucdavis.edu

2013-12-15

The iterative diagonalization of a sequence of large ill-conditioned generalized eigenvalue problems is a computational bottleneck in quantum mechanical methods employing a nonorthogonal basis for ab initio electronic structure calculations. We propose a hybrid preconditioning scheme to effectively combine global and locally accelerated preconditioners for rapid iterative diagonalization of such eigenvalue problems. In partition-of-unity finite-element (PUFE) pseudopotential density-functional calculations, employing a nonorthogonal basis, we show that the hybrid preconditioned block steepest descent method is a cost-effective eigensolver, outperforming current state-of-the-art global preconditioning schemes, and comparably efficient for the ill-conditioned generalized eigenvalue problems produced by PUFE as the locally optimal blockmore » preconditioned conjugate-gradient method for the well-conditioned standard eigenvalue problems produced by planewave methods.« less

Healing of Fatigue Crack in 1045 Steel by Using Eddy Current Treatment

PubMed Central

Yang, Chuan; Xu, Wenchen; Guo, Bin; Shan, Debin; Zhang, Jian

2016-01-01

In order to investigate the methods to heal fatigue cracks in metals, tubular specimens of 1045 steel with axial and radial fatigue cracks were treated under the eddy current. The optical microscope was employed to examine the change of fatigue cracks of specimens before and after the eddy current treatment. The results show that the fatigue cracks along the axial direction of the specimen could be healed effectively in the fatigue crack initiation zone and the crack tip zone under the eddy current treatment, and the healing could occur within a very short time. The voltage breakdown and the transient thermal compressive stress caused by the detouring of eddy current around the fatigue crack were the main factors contributing to the healing in the fatigue crack initiation zone and the crack tip zone, respectively. Eddy current treatment may be a novel and effective method for crack healing. PMID:28773761

Healing of Fatigue Crack in 1045 Steel by Using Eddy Current Treatment.

PubMed

Yang, Chuan; Xu, Wenchen; Guo, Bin; Shan, Debin; Zhang, Jian

2016-07-29

In order to investigate the methods to heal fatigue cracks in metals, tubular specimens of 1045 steel with axial and radial fatigue cracks were treated under the eddy current. The optical microscope was employed to examine the change of fatigue cracks of specimens before and after the eddy current treatment. The results show that the fatigue cracks along the axial direction of the specimen could be healed effectively in the fatigue crack initiation zone and the crack tip zone under the eddy current treatment, and the healing could occur within a very short time. The voltage breakdown and the transient thermal compressive stress caused by the detouring of eddy current around the fatigue crack were the main factors contributing to the healing in the fatigue crack initiation zone and the crack tip zone, respectively. Eddy current treatment may be a novel and effective method for crack healing.

Measurement of toroidal vessel eddy current during plasma disruption on J-TEXT

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liu, L. J.; Yu, K. X.; Zhang, M., E-mail: zhangming@hust.edu.cn

2016-01-15

In this paper, we have employed a thin, printed circuit board eddy current array in order to determine the radial distribution of the azimuthal component of the eddy current density at the surface of a steel plate. The eddy current in the steel plate can be calculated by analytical methods under the simplifying assumptions that the steel plate is infinitely large and the exciting current is of uniform distribution. The measurement on the steel plate shows that this method has high spatial resolution. Then, we extended this methodology to a toroidal geometry with the objective of determining the poloidal distributionmore » of the toroidal component of the eddy current density associated with plasma disruption in a fusion reactor called J-TEXT. The preliminary measured result is consistent with the analysis and calculation results on the J-TEXT vacuum vessel.« less

Load power device, system and method of load control and management employing load identification

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yang, Yi; Luebke, Charles John; Schoepf, Thomas J.

A load power device includes a power input, at least one power output for at least one load, a plurality of sensors structured to sense voltage and current at the at least one power output, and a processor. The processor provides: (a) load identification based upon the sensed voltage and current, and (b) load control and management based upon the load identification.

An assessment of the current treatment landscape for rheumatology patients in Qatar: Recognising unmet needs and moving towards solutions.

PubMed

Emadi, Samar Al; Hammoudeh, Mohammed; Mounir, Mohamed; Mueller, Ruediger B; Wells, Alvin F; Sarakbi, Housam Aldeen

2017-04-01

Objective This study assessed the mode of application (oral, intravenous or subcutaneous (SC)) currently employed in the treatment of rheumatoid arthritis (RA) in patients from Qatar in comparison with patients' individual preferences for the mode of application of their treatment. Methods This study included 294 RA patients visiting three clinics at the main referral hospital in Qatar who were interviewed using a standard questionnaire to determine their preference of mode of application for their disease-modifying antirheumatic drug (DMARD) treatment in relation to their currently employed mode of application. Results The majority of patients were female (76%), and 93% of male patients and 61% of female patients in the study clinics were of a nationality other than Qatari. The highest patient preference recorded was for an oral therapy (69%), compared with injection (23%) and intravenous (8%) therapy. In total, 85% of patients expressed a preference to remain on oral therapy compared with 63% and 58% of intravenous and SC injection patients indicating a preference to remain on their current method of administration. Conclusions This high preference for oral therapies highlights the considerable need for incorporation of new oral targeted synthetic DMARD therapies into clinical practice within the region.

An assessment of the current treatment landscape for rheumatology patients in Qatar: Recognising unmet needs and moving towards solutions

PubMed Central

Hammoudeh, Mohammed; Mounir, Mohamed; Mueller, Ruediger B.; Wells, Alvin F.; Sarakbi, Housam Aldeen

2017-01-01

Objective This study assessed the mode of application (oral, intravenous or subcutaneous (SC)) currently employed in the treatment of rheumatoid arthritis (RA) in patients from Qatar in comparison with patients’ individual preferences for the mode of application of their treatment. Methods This study included 294 RA patients visiting three clinics at the main referral hospital in Qatar who were interviewed using a standard questionnaire to determine their preference of mode of application for their disease-modifying antirheumatic drug (DMARD) treatment in relation to their currently employed mode of application. Results The majority of patients were female (76%), and 93% of male patients and 61% of female patients in the study clinics were of a nationality other than Qatari. The highest patient preference recorded was for an oral therapy (69%), compared with injection (23%) and intravenous (8%) therapy. In total, 85% of patients expressed a preference to remain on oral therapy compared with 63% and 58% of intravenous and SC injection patients indicating a preference to remain on their current method of administration. Conclusions This high preference for oral therapies highlights the considerable need for incorporation of new oral targeted synthetic DMARD therapies into clinical practice within the region. PMID:28415924

Longitudinal gradient coil optimization in the presence of transient eddy currents.

PubMed

Trakic, A; Liu, F; Lopez, H Sanchez; Wang, H; Crozier, S

2007-06-01

The switching of magnetic field gradient coils in magnetic resonance imaging (MRI) inevitably induces transient eddy currents in conducting system components, such as the cryostat vessel. These secondary currents degrade the spatial and temporal performance of the gradient coils, and compensation methods are commonly employed to correct for these distortions. This theoretical study shows that by incorporating the eddy currents into the coil optimization process, it is possible to modify a gradient coil design so that the fields created by the coil and the eddy currents combine together to generate a spatially homogeneous gradient that follows the input pulse. Shielded and unshielded longitudinal gradient coils are used to exemplify this novel approach. To assist in the evaluation of transient eddy currents induced within a realistic cryostat vessel, a low-frequency finite-difference time-domain (FDTD) method using the total-field scattered-field (TFSF) scheme was performed. The simulations demonstrate the effectiveness of the proposed method for optimizing longitudinal gradient fields while taking into account the spatial and temporal behavior of the eddy currents.

A comprehensive review on green nanomaterials using biological systems: Recent perception and their future applications.

PubMed

Saratale, Rijuta Ganesh; Karuppusamy, Indira; Saratale, Ganesh Dattatraya; Pugazhendhi, Arivalagan; Kumar, Gopalakrishanan; Park, Yooheon; Ghodake, Gajanan S; Bharagava, Ram Naresh; Banu, J Rajesh; Shin, Han Seung

2018-05-19

Over the last few years, nanotechnology is increasingly developing in scientific sector, which has attracted a great deal of interest because of its abundant applications in almost all the areas. In recent times, green nanotechnology is a relative and multidisciplinary field that has emerged as a rapidly developing research area. This is serving as an important technique that spotlight on making the procedure which is clean, safe and in particular environtmentally friendly, in a gap with the currently employed methods such as chemical and physical methods for nanosynthesis. The present review recaps the existing knowledge on various biogenic synthesis methods relying on bacteria, fungi, yeast, algae, viruses and on using biomolecules. The green nanosynthesis refers to the employment of reducing and stabilizing agents from plants and other natural resources, to fabricate nanomaterials. The green synthesis method does not engage the use of exceedingly venomous chemicals or elevated energy inputs during the synthesis. Nanoparticles (NPs) with distinct shapes, sizes and bioactivity can be produced from the variations in the bio-reducing agents employed for nanosynthesis. Hence, this review article summarizes the present information regarding the biological methods which are employed to fabricate greener, safer, and environmentally sustainable nanosynthesis routes. This review mainly highlights the wide-scale fabrication of NPs via green synthesis for biomedical and agricultural applications. Copyright © 2018. Published by Elsevier B.V.

On-line tool breakage monitoring of vibration tapping using spindle motor current

NASA Astrophysics Data System (ADS)

Li, Guangjun; Lu, Huimin; Liu, Gang

2008-10-01

Input current of driving motor has been employed successfully as monitoring the cutting state in manufacturing processes for more than a decade. In vibration tapping, however, the method of on-line monitoring motor electric current has not been reported. In this paper, a tap failure prediction method is proposed to monitor the vibration tapping process using the electrical current signal of the spindle motor. The process of vibration tapping is firstly described. Then the relationship between the torque of vibration tapping and the electric current of motor is investigated by theoretic deducing and experimental measurement. According to those results, a monitoring method of tool's breakage is proposed through monitoring the ratio of the current amplitudes during adjacent vibration tapping periods. Finally, a low frequency vibration tapping system with motor current monitoring is built up using a servo motor B-106B and its driver CR06. The proposed method has been demonstrated with experiment data of vibration tapping in titanic alloys. The result of experiments shows that the method, which can avoid the tool breakage and giving a few error alarms when the threshold of amplitude ratio is 1.2 and there is at least 2 times overrun among 50 adjacent periods, is feasible for tool breakage monitoring in the process of vibration tapping small thread holes.

A fast method for detecting Cryptosporidium parvum oocysts in real world samples

NASA Astrophysics Data System (ADS)

Stewart, Shona; McClelland, Lindy; Maier, John

2005-04-01

Contamination of drinking water with pathogenic microorganisms such as Cryptosporidium has become an increasing concern in recent years. Cryptosporidium oocysts are particularly problematic, as infections caused by this organism can be life threatening in immunocompromised patients. Current methods for monitoring and analyzing water are often laborious and require experts to conduct. In addition, many of the techniques require very specific reagents to be employed. These factors add considerable cost and time to the analytical process. Raman spectroscopy provides specific molecular information on samples, and offers advantages of speed, sensitivity and low cost over current methods of water monitoring. Raman spectroscopy is an optical method that has demonstrated the capability to identify and differentiate microorganisms at the species and strain levels. In addition, this technique has exhibited sensitivities down to the single organism detection limit. We have employed Raman spectroscopy and Raman Chemical Imaging, in conjunction with chemometric techniques, to detect small numbers of oocysts in the presence of interferents derived from real-world water samples. Our investigations have also indicated that Raman Chemical Imaging may provide chemical and physiological information about an oocyst sample which complements information provided by the traditional methods. This work provides evidence that Raman imaging is a useful technique for consideration in the water quality industry.

High bandwidth magnetically isolated signal transmission circuit

NASA Technical Reports Server (NTRS)

Repp, John Donald (Inventor)

2005-01-01

Many current electronic systems incorporate expensive or sensitive electrical components. Because electrical energy is often generated or transmitted at high voltages, the power supplies to these electronic systems must be carefully designed. Power supply design must ensure that the electrical system being supplied with power is not exposed to excessive voltages or currents. In order to isolate power supplies from electrical equipment, many methods have been employed. These methods typically involve control systems or signal transfer methods. However, these methods are not always suitable because of their drawbacks. The present invention relates to transmitting information across an interface. More specifically, the present invention provides an apparatus for transmitting both AC and DC information across a high bandwidth magnetic interface with low distortion.

Predicting hospital accounting costs

PubMed Central

Newhouse, Joseph P.; Cretin, Shan; Witsberger, Christina J.

1989-01-01

Two alternative methods to Medicare Cost Reports that provide information about hospital costs more promptly but less accurately are investigated. Both employ utilization data from current-year bills. The first attaches costs to utilization data using cost-charge ratios from the previous year's cost report; the second uses charges from current year's bills. The first method is the more accurate of the two, but even using it, only 40 percent of hospitals had predicted costs within plus or minus 5 percent of actual costs. The feasibility and cost of obtaining cost reports from a small, fast-track sample of hospitals should be investigated. PMID:10313352

Development of design specifications, details and design criteria for traffic light poles

DOT National Transportation Integrated Search

2006-09-01

Current rules and fabrication methods employed in the design of traffic light poles do not adequately address fatigue and fracture issues associated with the connection of mast arms to the vertical poles and the connection of the poles to the foundat...

Broadcast Journalism Education and the Capstone Experience

ERIC Educational Resources Information Center

Tanner, Andrea; Forde, Kathy Roberts; Besley, John C.; Weir, Tom

2012-01-01

This study assesses the current state of the television news capstone experience in accredited journalism and mass communication programs in the United States. Specifically, the authors employed a mixed-methods approach, interviewing 20 television news capstone instructors and conducting an analysis of broadcast journalism curriculum information…

What We Know About: Culturally Sensitive Instruction and Student Learning.

ERIC Educational Resources Information Center

Educational Research Service, Arlington, VA.

Current research suggests that culture strongly influences students' learning patterns, communication styles, perceptions, and behavior. This research summary details ways that teachers can improve student learning by becoming aware of cultural differences and employing culturally sensitive instructional methods. Concentrating on how students…

A Study of Applying Pulsed Remote Field Eddy Current in Ferromagnetic Pipes Testing

PubMed Central

Luo, Qingwang; Shi, Yibing; Wang, Zhigang; Zhang, Wei; Li, Yanjun

2017-01-01

Pulsed Remote Field Eddy Current Testing (PRFECT) attracts the attention in the testing of ferromagnetic pipes because of its continuous spectrum. This paper simulated the practical PRFECT of pipes by using ANSYS software and employed Least Squares Support Vector Regression (LSSVR) to extract the zero-crossing time to analyze the pipe thickness. As a result, a secondary peak is found in zero-crossing time when transmitter passed by a defect. The secondary peak will lead to wrong quantification and the localization of defects, especially when defects are found only at the transmitter location. Aiming to eliminate the secondary peaks, double sensing coils are set in the transition zone and Wiener deconvolution filter is applied. In the proposed method, position dependent response of the differential signals from the double sensing coils is calibrated by employing zero-mean normalization. The methods proposed in this paper are validated by analyzing the simulation signals and can improve the practicality of PRFECT of ferromagnetic pipes. PMID:28475141

A Study of Applying Pulsed Remote Field Eddy Current in Ferromagnetic Pipes Testing.

PubMed

Luo, Qingwang; Shi, Yibing; Wang, Zhigang; Zhang, Wei; Li, Yanjun

2017-05-05

Pulsed Remote Field Eddy Current Testing (PRFECT) attracts the attention in the testing of ferromagnetic pipes because of its continuous spectrum. This paper simulated the practical PRFECT of pipes by using ANSYS software and employed Least Squares Support Vector Regression (LSSVR) to extract the zero-crossing time to analyze the pipe thickness. As a result, a secondary peak is found in zero-crossing time when transmitter passed by a defect. The secondary peak will lead to wrong quantification and the localization of defects, especially when defects are found only at the transmitter location. Aiming to eliminate the secondary peaks, double sensing coils are set in the transition zone and Wiener deconvolution filter is applied. In the proposed method, position dependent response of the differential signals from the double sensing coils is calibrated by employing zero-mean normalization. The methods proposed in this paper are validated by analyzing the simulation signals and can improve the practicality of PRFECT of ferromagnetic pipes.

The relationship between job satisfaction and intention to leave current employment among registered nurses in a teaching hospital.

PubMed

Ramoo, Vimala; Abdullah, Khatijah L; Piaw, Chua Yan

2013-11-01

To assess Malaysian nurses' perceived job satisfaction and to determine whether any association exists between job satisfaction and intention to leave current employment. There is currently a shortage of qualified nurses, and healthcare organisations often face challenges in retaining trained nurses. Job satisfaction has been identified as a factor that influences nurse turnover. However, this has not been widely explored in Malaysia. Cross-sectional survey. Registered nurses in a teaching hospital in Malaysia completed a self-administered questionnaire. Of the 150 questionnaires distributed, 141 were returned (response rate = 94%). Overall, nurses had a moderate level of job satisfaction, with higher satisfaction for motivational factors. Significant effects were observed between job satisfaction and demographic variables. About 40% of the nurses intended to leave their current employment. Furthermore, age, work experience and nursing education had significant associations with intention to leave. Logistic regression analysis revealed that job satisfaction was a significant and independent predictor of nurses' intention to leave after controlling for demographic variables. The results suggest that there is a significant association between job satisfaction and nurses' intention to leave their current employment. It adds to the existing literature on the relationship between nurses' job satisfaction and intention to leave. Methods for enhancing nurses' job satisfaction are vital to promote the long-term retention of nurses within organisations. Attention must be paid to the needs of younger nurses, as they represent the majority of the nursing workforce and often have lower satisfaction and greater intention to leave than older nurses do. Strategies to nurture younger nurses, such as providing opportunities for further education, greater management decision-making capabilities and flexible working environment, are essential. © 2013 John Wiley & Sons Ltd.

Mapping B(1)-induced eddy current effects near metallic structures in MR images: a comparison of simulation and experiment.

PubMed

Vashaee, S; Goora, F; Britton, M M; Newling, B; Balcom, B J

2015-01-01

Magnetic resonance imaging (MRI) in the presence of metallic structures is very common in medical and non-medical fields. Metallic structures cause MRI image distortions by three mechanisms: (1) static field distortion through magnetic susceptibility mismatch, (2) eddy currents induced by switched magnetic field gradients and (3) radio frequency (RF) induced eddy currents. Single point ramped imaging with T1 enhancement (SPRITE) MRI measurements are largely immune to susceptibility and gradient induced eddy current artifacts. As a result, one can isolate the effects of metal objects on the RF field. The RF field affects both the excitation and detection of the magnetic resonance (MR) signal. This is challenging with conventional MRI methods, which cannot readily separate the three effects. RF induced MRI artifacts were investigated experimentally at 2.4 T by analyzing image distortions surrounding two geometrically identical metallic strips of aluminum and lead. The strips were immersed in agar gel doped with contrast agent and imaged employing the conical SPRITE sequence. B1 mapping with pure phase encode SPRITE was employed to measure the B1 field around the strips of metal. The strip geometry was chosen to mimic metal electrodes employed in electrochemistry studies. Simulations are employed to investigate the RF field induced eddy currents in the two metallic strips. The RF simulation results are in good agreement with experimental results. Experimental and simulation results show that the metal has a pronounced effect on the B1 distribution and B1 amplitude in the surrounding space. The electrical conductivity of the metal has a minimal effect. Copyright © 2014 Elsevier Inc. All rights reserved.

Over-current carrying characteristics of rectangular-shaped YBCO thin films prepared by MOD method

NASA Astrophysics Data System (ADS)

Hotta, N.; Yokomizu, Y.; Iioka, D.; Matsumura, T.; Kumagai, T.; Yamasaki, H.; Shibuya, M.; Nitta, T.

2008-02-01

A fault current limiter (FCL) may be manufactured at competitive qualities and prices by using rectangular-shaped YBCO films which are prepared by metal-organic deposition (MOD) method, because the MOD method can produce large size elements with a low-cost and non-vacuum technique. Prior to constructing a superconducting FCL (SFCL), AC over-current carrying experiments were conducted for 120 mm long elements where YBCO thin film of about 200 nm in thickness was coated on sapphire substrate with cerium oxide (CeO2) interlayer. In the experiments, only single cycle of the ac damping current of 50 Hz was applied to the pure YBCO element without protective metal coating or parallel resistor and the magnitude of the current was increased step by step until the breakdown phenomena occurred in the element. In each experiment, current waveforms flowing through the YBCO element and voltage waveform across the element were measured to get the voltage-current characteristics. The allowable over-current and generated voltage were successfully estimated for the pure YBCO films. It can be pointed out that the lower n-value trends to bring about the higher allowable over-current and the higher withstand voltage more than tens of volts. The YBCO film having higher n-value is sensitive to the over-current. Thus, some protective methods such as a metal coating should be employed for applying to the fault current limiter.

Welfare to Work? Impact of Maternal Health on Employment

PubMed Central

Romero, Diana; Chavkin, Wendy; Wise, Paul H.; Smith, Lauren A.; Wood, Pamela R.

2002-01-01

Objectives. This study investigated whether health problems among poor mothers of chronically ill children affect their ability to obtain and maintain employment. Methods. Mothers of children with chronic illnesses were surveyed at clinical and welfare agency sites in San Antonio, Tex. Results. There were distinct health differences according to mothers’ TANF and employment status. Mothers without TANF experience reported better physical and mental health and less domestic violence and substance use than did those who had TANF experience. Those not currently working had higher rates of physical and mental health problems. Conclusions. Poor maternal health is associated with need for cash assistance and health insurance. Policymakers must recognize that social policies promoting employment will fail if they do not address the health needs of poor women and children. PMID:12197974

20 CFR 216.17 - What amount of regular non-railroad employment will break a current connection.

Code of Federal Regulations, 2011 CFR

2011-04-01

... employment will break a current connection. 216.17 Section 216.17 Employees' Benefits RAILROAD RETIREMENT BOARD REGULATIONS UNDER THE RAILROAD RETIREMENT ACT ELIGIBILITY FOR AN ANNUITY Current Connection With... connection. The amount of regular non-railroad employment needed to break a current connection depends on...

20 CFR 216.17 - What amount of regular non-railroad employment will break a current connection.

Code of Federal Regulations, 2010 CFR

2010-04-01

... employment will break a current connection. 216.17 Section 216.17 Employees' Benefits RAILROAD RETIREMENT BOARD REGULATIONS UNDER THE RAILROAD RETIREMENT ACT ELIGIBILITY FOR AN ANNUITY Current Connection With... connection. The amount of regular non-railroad employment needed to break a current connection depends on...

RICH detectors: Analysis methods and their impact on physics

NASA Astrophysics Data System (ADS)

Križan, Peter

2017-12-01

The paper discusses the importance of particle identification in particle physics experiments, and reviews the impact of ring imaging Cherenkov (RICH) counters in experiments that are currently running, or are under construction. Several analysis methods are discussed that are needed to calibrate a RICH counter, and to align its components with the rest of the detector. Finally, methods are reviewed on how to employ the collected data to efficiently separate one particle species from the other.

Association between being employed in a smoke-free workplace and living in a smoke-free home: Evidence from 15 low and middle income countries☆

PubMed Central

Nazar, Gaurang P.; Lee, John Tayu; Glantz, Stanton A.; Arora, Monika; Pearce, Neil; Millett, Christopher

2014-01-01

Objective To assess whether being employed in a smoke-free workplace is associated with living in a smoke-free home in 15 low and middle income countries (LMICs). Methods Country-specific individual level analyses of cross-sectional Global Adult Tobacco Survey data (2008–2011) from 15 LMICs was conducted using multiple logistic regression. The dependent variable was living in a smoke-free home; the independent variable was being employed in a smoke-free workplace. Analyses were adjusted for age, gender, residence, region, education, occupation, current smoking, current smokeless tobacco use and number of household members. Individual country results were combined in a random effects meta-analysis. Results In each country, the percentage of participants employed in a smoke-free workplace who reported living in a smoke-free home was higher than those employed in a workplace not smoke-free. The adjusted odds ratios (AORs) of living in a smoke-free home among participants employed in a smoke-free workplace (vs. those employed where smoking occurred) were statistically significant in 13 of the 15 countries, ranging from 1.12 [95% CI 0.79–1.58] in Uruguay to 2.29 [1.37–3.83] in China. The pooled AOR was 1.61 [1.46–1.79]. Conclusion In LMICs, employment in a smoke-free workplace is associated with living in a smoke-free home. Accelerated implementation of comprehensive smoke-free policies is likely to result in substantial population health benefits in these settings. PMID:24287123

“Towards building better linkages between aqueous phase chemistry and microphysics in CMAQ”

EPA Science Inventory

Currently, CMAQ’s aqueous phase chemistry routine (AQCHEM-base) assumes Henry’s Law equilibrium and employs a forward Euler method to solve a small set of oxidation equations, considering the additional processes of aitken scavenging and wet deposition in series and e...

Nano-sized Contrast Agents to Non-Invasively Detect Renal Inflammation by Magnetic Resonance Imaging

PubMed Central

Thurman, Joshua M.; Serkova, Natalie J.

2013-01-01

Several molecular imaging methods have been developed that employ nano-sized contrast agents to detect markers of inflammation within tissues. Renal inflammation contributes to disease progression in a wide range of autoimmune and inflammatory diseases, and a biopsy is currently the only method of definitively diagnosing active renal inflammation. However, the development of new molecular imaging methods that employ contrast agents capable of detecting particular immune cells or protein biomarkers will allow clinicians to evaluate inflammation throughout the kidneys, and to assess a patient's response to immunomodulatory drugs. These imaging tools will improve our ability to validate new therapies and to optimize the treatment of individual patients with existing therapies. This review describes the clinical need for new methods of monitoring renal inflammation, and recent advances in the development of nano-sized contrast agents for detection of inflammatory markers of renal disease. PMID:24206601

Similarity based false-positive reduction for breast cancer using radiographic and pathologic imaging features

NASA Astrophysics Data System (ADS)

Pai, Akshay; Samala, Ravi K.; Zhang, Jianying; Qian, Wei

2010-03-01

Mammography reading by radiologists and breast tissue image interpretation by pathologists often leads to high False Positive (FP) Rates. Similarly, current Computer Aided Diagnosis (CADx) methods tend to concentrate more on sensitivity, thus increasing the FP rates. A novel method is introduced here which employs similarity based method to decrease the FP rate in the diagnosis of microcalcifications. This method employs the Principal Component Analysis (PCA) and the similarity metrics in order to achieve the proposed goal. The training and testing set is divided into generalized (Normal and Abnormal) and more specific (Abnormal, Normal, Benign) classes. The performance of this method as a standalone classification system is evaluated in both the cases (general and specific). In another approach the probability of each case belonging to a particular class is calculated. If the probabilities are too close to classify, the augmented CADx system can be instructed to have a detailed analysis of such cases. In case of normal cases with high probability, no further processing is necessary, thus reducing the computation time. Hence, this novel method can be employed in cascade with CADx to reduce the FP rate and also avoid unnecessary computational time. Using this methodology, a false positive rate of 8% and 11% is achieved for mammography and cellular images respectively.

Health Risk Reduction Programs in Employer-Sponsored Health Plans: Part II—Law and Ethics

PubMed Central

Rothstein, Mark A.; Harrell, Heather L.

2011-01-01

Objective We sought to examine the legal and ethical implications of workplace health risk reduction programs (HRRPs) using health risk assessments, individually focused risk reduction, and financial incentives to promote compliance. Methods We conducted a literature review, analyzed relevant statutes and regulations, and considered the effects of these programs on employee health privacy. Results A variety of laws regulate HRRPs, and there is little evidence that employer-sponsored HRRPs violate these provisions; infringement on individual health privacy is more difficult to assess. Conclusion Although current laws permit a wide range of employer health promotion activities, HRRPs also may entail largely unquantifiable costs to employee privacy and related interests. PMID:19625971

Predictors of employment for young adults with developmental motor disabilities.

PubMed

Magill-Evans, Joyce; Galambos, Nancy; Darrah, Johanna; Nickerson, Christy

2008-01-01

To identify the personal, family, and community factors that facilitate or hinder employment for young adults with developmental motor disabilities. Quantitative methods with an embedded qualitative component were used. Seventy-six persons between the ages of 20 and 30 years of age (Mean = 25, SD = 3.1) with a diagnosis of either cerebral palsy or spina bifida completed questionnaires addressing factors such as depression, and participated in a semi-structured interview that allowed participants to describe their experiences with education, employment, transportation, and other services. Almost half of the participants (n = 35) were not currently employed. Hierarchical regression analyses indicated that gender (females were less likely to be employed), IQ (lower IQ associated with unemployment), and transportation dependence accounted for 42% of the variance in employment. Themes emerging from content analysis of the interviews supported the findings related to transportation barriers. Social reactions to disability limited employment opportunities, and participants often felt stuck in terms of employment options with limited opportunities for advancement. Transportation is a significant barrier to employment and innovative solutions are needed. Issues related to gender need to be considered when addressing employment inequities for persons with primarily motor disabilities.

Influences of Women's Employment on the Gendered Division of Household Labor over the Life Course: Evidence from a 31-Year Panel Study

ERIC Educational Resources Information Center

Cunningham, Mick

2007-01-01

Drawing on data from a panel study of White women spanning 31 years, the analyses examine the influence of women's employment on the gendered division of household labor. Multiple dimensions of women's employment are investigated, including accumulated employment histories, current employment status, current employment hours, and relative income.…

A method for the computational modeling of the physics of heart murmurs

NASA Astrophysics Data System (ADS)

Seo, Jung Hee; Bakhshaee, Hani; Garreau, Guillaume; Zhu, Chi; Andreou, Andreas; Thompson, William R.; Mittal, Rajat

2017-05-01

A computational method for direct simulation of the generation and propagation of blood flow induced sounds is proposed. This computational hemoacoustic method is based on the immersed boundary approach and employs high-order finite difference methods to resolve wave propagation and scattering accurately. The current method employs a two-step, one-way coupled approach for the sound generation and its propagation through the tissue. The blood flow is simulated by solving the incompressible Navier-Stokes equations using the sharp-interface immersed boundary method, and the equations corresponding to the generation and propagation of the three-dimensional elastic wave corresponding to the murmur are resolved with a high-order, immersed boundary based, finite-difference methods in the time-domain. The proposed method is applied to a model problem of aortic stenosis murmur and the simulation results are verified and validated by comparing with known solutions as well as experimental measurements. The murmur propagation in a realistic model of a human thorax is also simulated by using the computational method. The roles of hemodynamics and elastic wave propagation on the murmur are discussed based on the simulation results.

How College Students Conceptualize and Practice Responsible Drinking

ERIC Educational Resources Information Center

Barry, Adam E.; Goodson, Patricia

2011-01-01

Objective: This study sought to employ a mixed-methods approach to (a) qualitatively explore responsible drinking beliefs and behaviors among a sample of college students, and (b) quantitatively assess the prevalence of those behaviors. Participants: Convenience samples, drawn from currently enrolled students attending a large public university in…

The Child Care Professional/Parent/Child: An Emerging Triad.

ERIC Educational Resources Information Center

Yawkey, Thomas D.; Bakawa, Lois J.

The importance of parenting roles and home environments on the young child's learning is given support through an examination of current child development research and contemporary sociological theory. Some methods that can be employed by the child care professional to facilitate parent involvement and awareness include: (1) interaction groups…

Methods and Forms of Rehabilitation of Visually Impaired Persons.

ERIC Educational Resources Information Center

Bell, S.

1990-01-01

The paper describes rehabilitation services provided by the Royal National Institute for the Blind (United Kingdom), focusing specifically on its Employment Rehabilitation Centers. Current vocational rehabilitation policy of the Institute is described, and a study in progress to determine the Institute's role in future programs is discussed.…

Teaching Teamwork through Coteaching in the Business Classroom

ERIC Educational Resources Information Center

Kliegl, Julie A.; Weaver, Kari D.

2014-01-01

Business educators recognize the importance of developing teamwork as an employability skill. However, current methods used to teach teamwork have been met with mixed results from both students and educators. This article integrates research on the importance of teamwork, team development processes, and coteaching through examining a case study…

A numerical assessment of rough surface scattering theories. I - Horizontal polarization. II - Vertical polarization

NASA Technical Reports Server (NTRS)

Rodriguez, Ernesto; Kim, Yunjin; Durden, Stephen L.

1992-01-01

A numerical evaluation is presented of the regime of validity for various rough surface scattering theories against numerical results obtained by employing the method of moments. The contribution of each theory is considered up to second order in the perturbation expansion for the surface current. Considering both vertical and horizontal polarizations, the unified perturbation method provides best results among all theories weighed.

Application of Taguchi methods to infrared window design

NASA Astrophysics Data System (ADS)

Osmer, Kurt A.; Pruszynski, Charles J.

1990-10-01

Dr. Genichi Taguchi, a prominent quality consultant, reduced a branch of statistics known as "Design of Experiments" to a cookbook methodology that can be employed by any competent engineer. This technique has been extensively employed by Japanese manufacturers, and is widely credited with helping them attain their current level of success in low cost, high quality product design and fabrication. Although this technique was originally put forth as a tool to streamline the determination of improved production processes, it can also be applied to a wide range of engineering problems. As part of an internal research project, this method of experimental design has been adapted to window trade studies and materials research. Two of these analyses are presented herein, and have been chosen to illustrate the breadth of applications to which the Taguchi method can be utilized.

Molecular gas dynamics applied to low-thrust propulsion

NASA Astrophysics Data System (ADS)

Zelesnik, Donna; Penko, Paul F.; Boyd, Iain D.

1993-11-01

The Direct Simulation Monte Carlo method is currently being applied to study flowfields of small thrusters, including both the internal nozzle and the external plume flow. The DSMC method is employed because of its inherent ability to capture nonequilibrium effects and proper boundary physics in low-density flow that are not readily obtained by continuum methods. Accurate prediction of both the internal and external nozzle flow is important in determining plume expansion which, in turn, bears directly on impingement and contamination effects.

Molecular gas dynamics applied to low-thrust propulsion

NASA Technical Reports Server (NTRS)

Zelesnik, Donna; Penko, Paul F.; Boyd, Iain D.

1993-01-01

The Direct Simulation Monte Carlo method is currently being applied to study flowfields of small thrusters, including both the internal nozzle and the external plume flow. The DSMC method is employed because of its inherent ability to capture nonequilibrium effects and proper boundary physics in low-density flow that are not readily obtained by continuum methods. Accurate prediction of both the internal and external nozzle flow is important in determining plume expansion which, in turn, bears directly on impingement and contamination effects.

Current deflection NDE for pipeline inspection and monitoring

NASA Astrophysics Data System (ADS)

Jarvis, Rollo; Cawley, Peter; Nagy, Peter B.

2016-02-01

Failure of oil and gas pipelines can often be catastrophic, therefore routine inspection for time dependent degradation is essential. In-line inspection is the most common method used; however, this requires the insertion and retrieval of an inspection tool that is propelled by the fluid in the pipe and risks becoming stuck, so alternative methods must often be employed. This work investigates the applicability of a non-destructive evaluation technique for both the detection and growth monitoring of defects, particularly corrosion under insulation. This relies on injecting an electric current along the pipe and indirectly measuring the deflection of current around defects from perturbations in the orthogonal components of the induced magnetic flux density. An array of three orthogonally oriented anisotropic magnetoresistive sensors has been used to measure the magnetic flux density surrounding a 6'' schedule-40 steel pipe carrying 2 A quasi-DC axial current. A finite element model has been developed that predicts the perturbations in magnetic flux density caused by current deflection which has been validated by experimental results. Measurements of the magnetic flux density at 50 mm lift-off from the pipe surface are stable and repeatable to the order of 100 pT which suggests that defect detection or monitoring growth of corrosion-type defects may be possible with a feasible magnitude of injected current. Magnetic signals are additionally incurred by changes in the wall thickness of the pipe due to manufacturing tolerances, and material property variations. If a monitoring scheme using baseline subtraction is employed then the sensitivity to defects can be improved while avoiding false calls.

78 FR 1249 - Agency Information Collection Activities; Extension of a Currently Approved Collection; Comment...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-08

... a Currently Approved Collection; Comment Request: Equal Employment Opportunity Plan Certification... Collection: Revision of a currently approved collection. (2) Title of the Form/Collection: Equal Employment... hour to complete an Equal Employment Opportunity Plan Short Form and submit it to the Office of Justice...

Getting a Job is Only Half the Battle: Maternal Job Loss and Child Classroom Behavior in Low-Income Families

PubMed Central

Hill, Heather D.; Morris, Pamela A.; Castells, Nina; Walker, Jessica Thornton

2011-01-01

This study uses data from an experimental employment program and instrumental variables (IV) estimation to examine the effects of maternal job loss on child classroom behavior. Random assignment to the treatment at one of three program sites is an exogenous predictor of employment patterns. Cross-site variation in treatment-control differences is used to identify the effects of employment levels and transitions. Under certain assumptions, this method controls for unobserved correlates of job loss and child well-being, as well as measurement error and simultaneity. IV estimates suggest that maternal job loss sharply increases problem behavior but has neutral effects on positive social behavior. Current employment programs concentrate primarily on job entry, but these findings point to the importance of promoting job stability for workers and their children. PMID:22162901

A Complex Network Approach to Stylometry

PubMed Central

Amancio, Diego Raphael

2015-01-01

Statistical methods have been widely employed to study the fundamental properties of language. In recent years, methods from complex and dynamical systems proved useful to create several language models. Despite the large amount of studies devoted to represent texts with physical models, only a limited number of studies have shown how the properties of the underlying physical systems can be employed to improve the performance of natural language processing tasks. In this paper, I address this problem by devising complex networks methods that are able to improve the performance of current statistical methods. Using a fuzzy classification strategy, I show that the topological properties extracted from texts complement the traditional textual description. In several cases, the performance obtained with hybrid approaches outperformed the results obtained when only traditional or networked methods were used. Because the proposed model is generic, the framework devised here could be straightforwardly used to study similar textual applications where the topology plays a pivotal role in the description of the interacting agents. PMID:26313921

Oxygen Measurements in Liposome Encapsulated Hemoglobin

NASA Astrophysics Data System (ADS)

Phiri, Joshua Benjamin

Liposome encapsulated hemoglobins (LEH's) are of current interest as blood substitutes. An analytical methodology for rapid non-invasive measurements of oxygen in artificial oxygen carriers is examined. High resolution optical absorption spectra are calculated by means of a one dimensional diffusion approximation. The encapsulated hemoglobin is prepared from fresh defibrinated bovine blood. Liposomes are prepared from hydrogenated soy phosphatidylcholine (HSPC), cholesterol and dicetylphosphate using a bath sonication method. An integrating sphere spectrophotometer is employed for diffuse optics measurements. Data is collected using an automated data acquisition system employing lock-in -amplifiers. The concentrations of hemoglobin derivatives are evaluated from the corresponding extinction coefficients using a numerical technique of singular value decomposition, and verification of the results is done using Monte Carlo simulations. In situ measurements are required for the determination of hemoglobin derivatives because most encapsulation methods invariably lead to the formation of methemoglobin, a nonfunctional form of hemoglobin. The methods employed in this work lead to high resolution absorption spectra of oxyhemoglobin and other derivatives in red blood cells and liposome encapsulated hemoglobin (LEH). The analysis using singular value decomposition method offers a quantitative means of calculating the fractions of oxyhemoglobin and other hemoglobin derivatives in LEH samples. The analytical methods developed in this work will become even more useful when production of LEH as a blood substitute is scaled up to large volumes.

Agricultural employers' hiring and safety practices for adolescent workers.

PubMed

Lee, B C; Westaby, J D; Chyou, P H; Purschwitz, M A

2007-01-01

The goal of the "Safety Training for Employers and Supervisors of Adolescent Farmworkers" initiative is to improve the occupational health and safety knowledge and practices of agricultural employers and supervisors responsible for employees, ages 14 to 17 years. Surveys were sent to members of the National Council of Agricultural Employers and the Washington Growers League to measure attitudes regarding adolescent employees, current hiring and training practices, and future intentions. More than half of the respondents hire adolescents. Two-thirds were male, nearly three-quarters of the respondents had college or post-graduate degrees, and more than half were 50 years or older. The majority of respondents had positive perceptions of adolescents in terms of dependability, helpfulness, and work ethic. Among those who currently hire young workers, the most common reasons were to provide a job for children of friends and family and because they can work part-time to fill a labor demand. Among those not hiring adolescents, the most common reason was concern about child labor regulations and associated tasks (e.g., paperwork, monitoring hours). Respondents use a variety of safety training resources, especially posters and safety meetings. For the future, they expect to need more handout materials and training videos. Study results provide insights into barriers to the employment of young workers and suggest methods by which agricultural safety specialists can best assist those employers and producers who are willing to hire adolescents into agricultural work settings.

The Application of Auto-Disturbance Rejection Control Optimized by Least Squares Support Vector Machines Method and Time-Frequency Representation in Voltage Source Converter-High Voltage Direct Current System.

PubMed

Liu, Ying-Pei; Liang, Hai-Ping; Gao, Zhong-Ke

2015-01-01

In order to improve the performance of voltage source converter-high voltage direct current (VSC-HVDC) system, we propose an improved auto-disturbance rejection control (ADRC) method based on least squares support vector machines (LSSVM) in the rectifier side. Firstly, we deduce the high frequency transient mathematical model of VSC-HVDC system. Then we investigate the ADRC and LSSVM principles. We ignore the tracking differentiator in the ADRC controller aiming to improve the system dynamic response speed. On this basis, we derive the mathematical model of ADRC controller optimized by LSSVM for direct current voltage loop. Finally we carry out simulations to verify the feasibility and effectiveness of our proposed control method. In addition, we employ the time-frequency representation methods, i.e., Wigner-Ville distribution (WVD) and adaptive optimal kernel (AOK) time-frequency representation, to demonstrate our proposed method performs better than the traditional method from the perspective of energy distribution in time and frequency plane.

The Application of Auto-Disturbance Rejection Control Optimized by Least Squares Support Vector Machines Method and Time-Frequency Representation in Voltage Source Converter-High Voltage Direct Current System

PubMed Central

Gao, Zhong-Ke

2015-01-01

In order to improve the performance of voltage source converter-high voltage direct current (VSC-HVDC) system, we propose an improved auto-disturbance rejection control (ADRC) method based on least squares support vector machines (LSSVM) in the rectifier side. Firstly, we deduce the high frequency transient mathematical model of VSC-HVDC system. Then we investigate the ADRC and LSSVM principles. We ignore the tracking differentiator in the ADRC controller aiming to improve the system dynamic response speed. On this basis, we derive the mathematical model of ADRC controller optimized by LSSVM for direct current voltage loop. Finally we carry out simulations to verify the feasibility and effectiveness of our proposed control method. In addition, we employ the time-frequency representation methods, i.e., Wigner-Ville distribution (WVD) and adaptive optimal kernel (AOK) time-frequency representation, to demonstrate our proposed method performs better than the traditional method from the perspective of energy distribution in time and frequency plane. PMID:26098556

Facilities and Methods Used in Full-scale Airplane Crash-fire Investigation

NASA Technical Reports Server (NTRS)

Black, Dugald O.

1952-01-01

The facilities and the techniques employed in the conduct of full scale airplane crash-fire studies currently being conducted at the NACA Lewis laboratory are discussed herein. This investigation is part of a comprehensive study of the airplane crash-fire problem. The crash configuration chosen, the general physical layout of the crash site, the test methods, the instrumentation, the data-recording systems, and the post-crash examination procedure are described

Conformal Electromagnetic Particle in Cell: A Review

DOE PAGES

Meierbachtol, Collin S.; Greenwood, Andrew D.; Verboncoeur, John P.; ...

2015-10-26

We review conformal (or body-fitted) electromagnetic particle-in-cell (EM-PIC) numerical solution schemes. Included is a chronological history of relevant particle physics algorithms often employed in these conformal simulations. We also provide brief mathematical descriptions of particle-tracking algorithms and current weighting schemes, along with a brief summary of major time-dependent electromagnetic solution methods. Several research areas are also highlighted for recommended future development of new conformal EM-PIC methods.

A Systematic Review of Current Understandings of Employability

ERIC Educational Resources Information Center

Williams, Stella; Dodd, Lorna J.; Steele, Catherine; Randall, Raymond

2016-01-01

A theoretical framework is essential for the effective evaluation of employability. However, there are a wide range of definitions of employability coexisting in current literature. A review into existing ways in which employability has been conceptualised is needed to inform a better understanding of the nature of contributions made by various…

20 CFR 645.270 - What procedures are there to ensure that currently employed workers may file grievances regarding...

Code of Federal Regulations, 2013 CFR

2013-04-01

... currently employed workers may file grievances regarding displacement and that Welfare-to-Work participants in employment activities may file grievances regarding displacement, health and safety standards and... regarding displacement and that Welfare-to-Work participants in employment activities may file grievances...

20 CFR 645.270 - What procedures are there to ensure that currently employed workers may file grievances regarding...

Code of Federal Regulations, 2010 CFR

2010-04-01

... currently employed workers may file grievances regarding displacement and that Welfare-to-Work participants in employment activities may file grievances regarding displacement, health and safety standards and... regarding displacement and that Welfare-to-Work participants in employment activities may file grievances...

20 CFR 645.270 - What procedures are there to ensure that currently employed workers may file grievances regarding...

Code of Federal Regulations, 2014 CFR

2014-04-01

... currently employed workers may file grievances regarding displacement and that Welfare-to-Work participants in employment activities may file grievances regarding displacement, health and safety standards and... regarding displacement and that Welfare-to-Work participants in employment activities may file grievances...

20 CFR 645.270 - What procedures are there to ensure that currently employed workers may file grievances regarding...

Code of Federal Regulations, 2011 CFR

2011-04-01

... currently employed workers may file grievances regarding displacement and that Welfare-to-Work participants in employment activities may file grievances regarding displacement, health and safety standards and... regarding displacement and that Welfare-to-Work participants in employment activities may file grievances...

20 CFR 645.270 - What procedures are there to ensure that currently employed workers may file grievances regarding...

Code of Federal Regulations, 2012 CFR

2012-04-01

... currently employed workers may file grievances regarding displacement and that Welfare-to-Work participants in employment activities may file grievances regarding displacement, health and safety standards and... regarding displacement and that Welfare-to-Work participants in employment activities may file grievances...

Towards the Goal of Full Employment: Trends, Obstacles and Policies.

ERIC Educational Resources Information Center

Richards, Peter

Expanding upon a report presented to the International Labor Organization (ILO), this book documents the current world employment situation, including how it has fallen short, how current economic policies interact with world employment, and how improvements can be made. Chapter one, "The Commitment to Full Employment," describes how the…

A new method for determining the acid number of biodiesel based on coulometric titration.

PubMed

Barbieri Gonzaga, Fabiano; Pereira Sobral, Sidney

2012-08-15

A new method is proposed for determining the acid number (AN) of biodiesel using coulometric titration with potentiometric detection, basically employing a potentiostat/galvanostat and an electrochemical cell containing a platinum electrode, a silver electrode, and a combination pH electrode. The method involves a sequential application of a constant current between the platinum (cathode) and silver (anode) electrodes, followed by measuring the potential of the combination pH electrode, using an isopropanol/water mixture as solvent and LiCl as the supporting electrolyte. A preliminary evaluation of the new method, using acetic acid for doping a biodiesel sample, showed an average recovery of 100.1%. Compared to a volumetric titration-based method for determining the AN of several biodiesel samples (ranging from about 0.18 to 0.95 mg g(-1)), the new method produced statistically similar results with better repeatability. Compared to other works reported in the literature, the new method presented an average repeatability up to 3.2 times better and employed a sample size up to 20 times smaller. Copyright © 2012 Elsevier B.V. All rights reserved.

“Towards building better linkages between aqueous phase ...

EPA Pesticide Factsheets

Currently, CMAQ’s aqueous phase chemistry routine (AQCHEM-base) assumes Henry’s Law equilibrium and employs a forward Euler method to solve a small set of oxidation equations, considering the additional processes of aitken scavenging and wet deposition in series and employing a bisection method to calculate H+ concentrations. With potentially hundreds of reactions that may be important in cloud water and only seven reactions in the current model, expansion of the existing mechanism is an important area of investigation. However, with the current mechanism hardwired into the solver code, the module is difficult to expand with additional chemistry. It also ignores the impacts of mass transfer limitations on cloud chemistry which may be significant. Here, the Kinetic PreProcessor has been applied to generate a Rosenbrock solver for the CMAQ v5.0.1 aqueous phase chemistry mechanism. The module has been updated to simultaneously solve kinetic mass transfer between the phases, dissociation/association, chemical kinetics, Aitken scavenging, and wet deposition. This will allow for easier expansion of the chemical mechanism in the future and a better link between aqueous phase chemistry and droplet microphysics. The National Exposure Research Laboratory (NERL) Atmospheric Modeling and Analysis Division (AMAD) conducts research in support of EPA mission to protect human health and the environment. AMAD research program is engaged in developing and evaluating pre

Current leads cooling for the series-connected hybrid magnets

NASA Astrophysics Data System (ADS)

Bai, Hongyu; Marshall, William S.; Bird, Mark D.; Gavrilin, Andrew V.; Weijers, Hubertus W.

2014-01-01

Two Series-Connected Hybrid (SCH) magnets are being developed at the National High Magnetic Field Laboratory. Both SCH magnets combine a set of resistive Florida-Bitter coils with a superconducting outsert coil constructed of the cable-in-conduit conductor (CICC). The outsert coils of the two magnets employ 20 kA BSCCO HTS current leads for the power supply although they have different designs and cooling methods. The copper heat exchangers of the HTS current leads for the HZB SCH are cooled with forced flow helium at a supply temperature of 44 K, while the copper heat exchangers of HTS current leads for NHMFL SCH are cooled with liquid nitrogen at a temperature of 78 K in a self-demand boil-off mode. This paper presents the two cooling methods and their impacts on cryogenic systems. Their efficiencies and costs are compared and presented.

Regression analysis of informative current status data with the additive hazards model.

PubMed

Zhao, Shishun; Hu, Tao; Ma, Ling; Wang, Peijie; Sun, Jianguo

2015-04-01

This paper discusses regression analysis of current status failure time data arising from the additive hazards model in the presence of informative censoring. Many methods have been developed for regression analysis of current status data under various regression models if the censoring is noninformative, and also there exists a large literature on parametric analysis of informative current status data in the context of tumorgenicity experiments. In this paper, a semiparametric maximum likelihood estimation procedure is presented and in the method, the copula model is employed to describe the relationship between the failure time of interest and the censoring time. Furthermore, I-splines are used to approximate the nonparametric functions involved and the asymptotic consistency and normality of the proposed estimators are established. A simulation study is conducted and indicates that the proposed approach works well for practical situations. An illustrative example is also provided.

The Effect of Situated Learning on Students Vocational English Learning

ERIC Educational Resources Information Center

Özüdogru, Melike; Özüdogru, Fatma

2017-01-01

The current study aimed to find out the effect of situated learning on students' Vocational English learning. This research employed a mixed method research design. In the quantitative part of the study, pre-tests and post-tests were implemented to investigate the differences in students' vocational English learning between the experimental and…

Utilization of pyrosequencing to monitor the microbiome dynamics of probiotic treated poultry (Gallus gallus domesticus) during downstream poultry processing

USDA-ARS?s Scientific Manuscript database

Antibiotic growth promoters that have been historically employed to control pathogens and increase the rate of animal development for human consumption are currently banned in many countries. Probiotics have been proposed as an alternative to control pathogenic bacteria. Traditional culture method...

Mega-Analysis of School Psychology Blueprint for Training and Practice Domains

ERIC Educational Resources Information Center

Burns, Matthew K.; Kanive, Rebecca; Zaslofsky, Anne F.; Parker, David C.

2013-01-01

Meta-analytic research is an effective method for synthesizing existing research and for informing practice and policy. Hattie (2009) suggested that meta-analytic procedures could be employed to existing meta-analyses to create a mega-analysis. The current mega-analysis examined a sample of 47 meta-analyses according to the "School…

The Use of Cognitive Task Analysis to Capture Expertise for Tracheal Extubation Training in Anesthesiology

ERIC Educational Resources Information Center

Embrey, Karen K.

2012-01-01

Cognitive task analysis (CTA) is a knowledge elicitation technique employed for acquiring expertise from domain specialists to support the effective instruction of novices. CTA guided instruction has proven effective in improving surgical skills training for medical students and surgical residents. The standard, current method of teaching clinical…

Occupational Outlets for Middle Level Training. What Is the Future of Middle Level Training?

ERIC Educational Resources Information Center

Mills, Paul; Cesnich, Janine

This project intended to determine whether a middle-level employment base existed in manufacturing and service industries in South Australia and to examine current trends and future directions of middle-level (paraprofessional) vocational training. The study used the following methods: literature review; labor market analysis; surveys of…

Techniques employed by the NASA White Sands Test Facility to ensure oxygen system component safety

NASA Technical Reports Server (NTRS)

Stradling, J. S.; Pippen, D. L.; Frye, G. W.

1983-01-01

Methods of ascertaining the safety and suitability of a variety of oxygen system components are discussed. Additionally, qualification and batch control requirements for soft goods in oxygen systems are presented. Current oxygen system component qualification test activities in progress at White Sands Test Facility are described.

Opportunities and Possibilities: Philosophical Hermeneutics and the Educational Researcher

ERIC Educational Resources Information Center

Agrey, Loren G.

2014-01-01

The opportunities that philosophical hermeneutics provide as a research tool are explored and it is shown that this qualitative research method can be employed as a valuable tool for the educational researcher. Used as an alternative to the standard quantitative approach to educational research, currently being the dominant paradigm of data…

Construction and Validation of an Instrument to Measure Environmental Orientations in a Diverse Group of Children

ERIC Educational Resources Information Center

Larson, Lincoln R.; Green, Gary T.; Castleberry, Steven B.

2011-01-01

An understanding of children's environmental orientations is of critical importance as opportunities for authentic contact with nature diminish. Current instruments for measuring children's environmental attitudes are complex, and few have been tested across diverse audiences. This study employed a mixed-methods approach that included pilot tests,…

Understanding the Art and Science of Implementation in the SAAF Efficacy Trial

ERIC Educational Resources Information Center

Berkel, Cady; Murry, Velma McBride; Roulston, Kathryn J.; Brody, Gene H.

2013-01-01

Purpose: The purpose of this paper is to demonstrate the importance of considering both fidelity and adaptation in assessing the implementation of evidence-based programs. Design/methodology/approach: The current study employs a multi-method strategy to understand two dimensions of implementation (fidelity and adaptation) in the Strong African…

Commonsense System Pricing; Or, How Much Will that $1,200 Computer Really Cost?

ERIC Educational Resources Information Center

Crawford, Walt

1984-01-01

Three methods employed to price and sell computer equipment are discussed: computer pricing, hardware pricing, system pricing (system includes complete computer and support hardware system and relatively complete software package). Advantages of system pricing are detailed, the author's system is described, and 10 systems currently available are…

Potential Applications and Impact of Microelectronic and Telecommunication Technology in Health Care Delivery. Final Report.

ERIC Educational Resources Information Center

Mandex, Inc., Vienna, VA.

This compendium of current and recent innovative methods of health care delivery focuses on telemedicine, and educational and energy management and control applications. Each application is doumented in a project abstract describing the system and the technology employed, and citing relevant information sources and a personal or organizational…

Reducing Covert Self-Injurious Behavior Maintained by Automatic Reinforcement through a Variable Momentary DRO Procedure

ERIC Educational Resources Information Center

Toussaint, Karen A.; Tiger, Jeffrey H.

2012-01-01

Covert self-injurious behavior (i.e., behavior that occurs in the absence of other people) can be difficult to treat. Traditional treatments typically have involved sophisticated methods of observation and often have employed positive punishment procedures. The current study evaluated the effectiveness of a variable momentary differential…

Brush potential curve tracer

DOEpatents

Finch, H.A.

1985-06-21

A device for analyzing commutating characteristics of a motor or generator includes a holder for supporting a plurality of probes adjacent a brush of the motor or generator. Measurements of electrical current characteristics of the probes provides information useful in analyzing operation of the machine. Methods for employing a device in accordance with the invention are also disclosed.

Contraceptive method choice among women in slum and non-slum communities in Nairobi, Kenya.

PubMed

Ochako, Rhoune; Izugbara, Chimaraoke; Okal, Jerry; Askew, Ian; Temmerman, Marleen

2016-07-12

Understanding women's contraceptive method choices is key to enhancing family planning services provision and programming. Currently however, very little research has addressed inter and intra-regional disparities in women's contraceptive method choice. Using data from slum and non-slum contexts in Nairobi, Kenya, the current study investigates the prevalence of and factors associated with contraceptive method choice among women. Data were from a cross-sectional quantitative study conducted among a random sample of 1,873 women (aged 15-49 years) in two non-slum and two slum settlement areas in Nairobi, Kenya. The study locations were purposively sampled by virtue of being part of the Nairobi Urban Health and Demographic Surveillance System. Bivariate and multivariate logistic regression were used to explore the association between the outcome variable, contraceptive method choice, and explanatory variables. The prevalence of contraceptive method choice was relatively similar across slum and non-slum settlements. 34.3 % of women in slum communities and 28.1 % of women in non-slum communities reported using short-term methods. Slightly more women living in the non-slum settlements reported use of long-term methods, 9.2 %, compared to 3.6 % in slum communities. Older women were less likely to use short-term methods than their younger counterparts but more likely to use long-term methods. Currently married women were more likely than never married women to use short-term and long-term methods. Compared to those with no children, women with three or more children were more likely to report using long term methods. Women working outside the home or those in formal employment also used modern methods of contraception more than those in self-employment or unemployed. Use of short-term and long-term methods is generally low among women living in slum and non-slum contexts in Nairobi. Investments in increasing women's access to various contraceptive options are urgently needed to help increase contraceptive prevalence rate. Thus, interventions that focus on more disadvantaged segments of the population will accelerate contraceptive uptake and improve maternal and child health in Kenya.

Upwind MacCormack Euler solver with non-equilibrium chemistry

NASA Technical Reports Server (NTRS)

Sherer, Scott E.; Scott, James N.

1993-01-01

A computer code, designated UMPIRE, is currently under development to solve the Euler equations in two dimensions with non-equilibrium chemistry. UMPIRE employs an explicit MacCormack algorithm with dissipation introduced via Roe's flux-difference split upwind method. The code also has the capability to employ a point-implicit methodology for flows where stiffness is introduced through the chemical source term. A technique consisting of diagonal sweeps across the computational domain from each corner is presented, which is used to reduce storage and execution requirements. Results depicting one dimensional shock tube flow for both calorically perfect gas and thermally perfect, dissociating nitrogen are presented to verify current capabilities of the program. Also, computational results from a chemical reactor vessel with no fluid dynamic effects are presented to check the chemistry capability and to verify the point implicit strategy.

A Petascale Non-Hydrostatic Atmospheric Dynamical Core in the HOMME Framework

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tufo, Henry

The High-Order Method Modeling Environment (HOMME) is a framework for building scalable, conserva- tive atmospheric models for climate simulation and general atmospheric-modeling applications. Its spatial discretizations are based on Spectral-Element (SE) and Discontinuous Galerkin (DG) methods. These are local methods employing high-order accurate spectral basis-functions that have been shown to perform well on massively parallel supercomputers at any resolution and scale particularly well at high resolutions. HOMME provides the framework upon which the CAM-SE community atmosphere model dynamical-core is constructed. In its current incarnation, CAM-SE employs the hydrostatic primitive-equations (PE) of motion, which limits its resolution to simulations coarser thanmore » 0.1 per grid cell. The primary objective of this project is to remove this resolution limitation by providing HOMME with the capabilities needed to build nonhydrostatic models that solve the compressible Euler/Navier-Stokes equations.« less

VAMPnets for deep learning of molecular kinetics.

PubMed

Mardt, Andreas; Pasquali, Luca; Wu, Hao; Noé, Frank

2018-01-02

There is an increasing demand for computing the relevant structures, equilibria, and long-timescale kinetics of biomolecular processes, such as protein-drug binding, from high-throughput molecular dynamics simulations. Current methods employ transformation of simulated coordinates into structural features, dimension reduction, clustering the dimension-reduced data, and estimation of a Markov state model or related model of the interconversion rates between molecular structures. This handcrafted approach demands a substantial amount of modeling expertise, as poor decisions at any step will lead to large modeling errors. Here we employ the variational approach for Markov processes (VAMP) to develop a deep learning framework for molecular kinetics using neural networks, dubbed VAMPnets. A VAMPnet encodes the entire mapping from molecular coordinates to Markov states, thus combining the whole data processing pipeline in a single end-to-end framework. Our method performs equally or better than state-of-the-art Markov modeling methods and provides easily interpretable few-state kinetic models.

[Current knowledge on the strain typing of the pathogenic fungus Histoplasma capsulatum var. capsulatum: a review of the findings].

PubMed

Reyes-Montes, M del R; Taylor, M L; Curiel-Quesada, E; Mesa-Arango, A C

2000-12-01

The classification of microbial strains is currently based on different typing methods, which must meet certain criteria in order to be widely used. Phenotypic and genotypic methods are being employed in the epidemiology of several fungal diseases. However, some problems associated to the phenotypic methods have fostered genotyping procedures, from DNA polymorphic diversity to gene sequencing studies, all aiming to differentiate and to relate fungal isolates or strains. Through these studies, it is possible to identify outbreaks, to detect nosocomial infection transmission, and to determine the source of infection, as well as to recognize virulent isolates. This paper is aimed at analyzing the methods recently used to type Histoplasma capsulatum, causative agent of the systemic mycosis known as histoplasmosis, in order to recommend those that yield reproducible and accurate results.

Performance analysis of FET microwave devices by use of extended spectral-element time-domain method

NASA Astrophysics Data System (ADS)

Sheng, Yijun; Xu, Kan; Wang, Daoxiang; Chen, Rushan

2013-05-01

The extended spectral-element time-domain (SETD) method is employed to analyse field effect transistor (FET) microwave devices. In order to impose the contribution of the FET microwave devices into the electromagnetic simulation, the SETD method is extended by introducing a lumped current term into the vector Helmholtz equation. The change of currents on each lumped component can be expressed by the change of voltage via corresponding models of equivalent circuit. The electric fields around the lumped component must be influenced by the change of voltage on each lumped component, and vice versa. So a global coupling about the EM-circuit can be built directly. The fully explicit solving scheme is maintained in this extended SETD method and the CPU time can be saved spontaneously. Three practical FET microwave devices are analysed in this article. The numerical results demonstrate the ability and accuracy of this method.

Diversity in parasitic helminths of Australasian marsupials and monotremes: a molecular perspective.

PubMed

Beveridge, Ian; Gasser, Robin B

2014-10-15

Marsupials and monotremes are a prominent part of the mammalian fauna in Australia, and harbour an extremely diverse and highly distinctive array of helminth parasites. Their study has been relatively neglected, likely because they have no direct, adverse socioeconomic impact. As the body plans of helminths generally are very simple and morphological characterisation likely underestimates true diversity, molecular tools have been employed to assess genetic diversity. Using biochemical and/or molecular methods, recent studies show extensive diversity in helminths of marsupials, with cryptic species being commonly encountered. The purpose of this article is to review current knowledge about the diversity of parasitic helminths of marsupials and monotremes, to raise questions as to whether current molecular data can be used to estimate diversity, what mechanisms lead to such diversity, to critically appraise the molecular tools that have been employed thus far to explore diversity and to discuss the directions which might be taken in the future employing improved techniques. Copyright © 2014 Australian Society for Parasitology Inc. Published by Elsevier Ltd. All rights reserved.

Trends in study design and the statistical methods employed in a leading general medicine journal.

PubMed

Gosho, M; Sato, Y; Nagashima, K; Takahashi, S

2018-02-01

Study design and statistical methods have become core components of medical research, and the methodology has become more multifaceted and complicated over time. The study of the comprehensive details and current trends of study design and statistical methods is required to support the future implementation of well-planned clinical studies providing information about evidence-based medicine. Our purpose was to illustrate study design and statistical methods employed in recent medical literature. This was an extension study of Sato et al. (N Engl J Med 2017; 376: 1086-1087), which reviewed 238 articles published in 2015 in the New England Journal of Medicine (NEJM) and briefly summarized the statistical methods employed in NEJM. Using the same database, we performed a new investigation of the detailed trends in study design and individual statistical methods that were not reported in the Sato study. Due to the CONSORT statement, prespecification and justification of sample size are obligatory in planning intervention studies. Although standard survival methods (eg Kaplan-Meier estimator and Cox regression model) were most frequently applied, the Gray test and Fine-Gray proportional hazard model for considering competing risks were sometimes used for a more valid statistical inference. With respect to handling missing data, model-based methods, which are valid for missing-at-random data, were more frequently used than single imputation methods. These methods are not recommended as a primary analysis, but they have been applied in many clinical trials. Group sequential design with interim analyses was one of the standard designs, and novel design, such as adaptive dose selection and sample size re-estimation, was sometimes employed in NEJM. Model-based approaches for handling missing data should replace single imputation methods for primary analysis in the light of the information found in some publications. Use of adaptive design with interim analyses is increasing after the presentation of the FDA guidance for adaptive design. © 2017 John Wiley & Sons Ltd.

Time for children: trends in the employment patterns of parents, 1967-2009.

PubMed

Fox, Liana; Han, Wen-Jui; Ruhm, Christopher; Waldfogel, Jane

2013-02-01

Using data from the 1967-2009 years of the March Current Population Surveys (CPS), we examine two important resources for children's well-being: time and money. We document trends in parental employment, from the perspective of children, and show what underlies these trends. We find that increases in family work hours mainly reflect movements into jobs by parents-particularly mothers, who in prior decades would have remained at home. This increase in market work has raised incomes for children in the typical two-parent family but not for those in lone-parent households. Time use data from 1975 and 2003-2008 reveal that working parents spend less time engaged in primary childcare than their counterparts without jobs but more than employed peers in previous cohorts. Analysis of 2004 work schedule data suggests that non-daytime work provides an alternative method of coordinating employment schedules for some dual-earner families.

Research reactor decommissioning experience - concrete removal and disposal -

DOE Office of Scientific and Technical Information (OSTI.GOV)

Manning, Mark R.; Gardner, Frederick W.

1990-07-01

Removal and disposal of neutron activated concrete from biological shields is the most significant operational task associated with research reactor decommissioning. During the period of 1985 thru 1989 Chem-Nuclear Systems, Inc. was the prime contractor for complete dismantlement and decommissioning of the Northrop TRIGA Mark F, the Virginia Tech Argonaut, and the Michigan State University TRIGA Mark I Reactor Facilities. This paper discusses operational requirements, methods employed, and results of the concrete removal, packaging, transport and disposal operations for these (3) research reactor decommissioning projects. Methods employed for each are compared. Disposal of concrete above and below regulatory release limitsmore » for unrestricted use are discussed. This study concludes that activated reactor biological shield concrete can be safely removed and buried under current regulations.« less

Integrating cell biology and proteomic approaches in plants.

PubMed

Takáč, Tomáš; Šamajová, Olga; Šamaj, Jozef

2017-10-03

Significant improvements of protein extraction, separation, mass spectrometry and bioinformatics nurtured advancements of proteomics during the past years. The usefulness of proteomics in the investigation of biological problems can be enhanced by integration with other experimental methods from cell biology, genetics, biochemistry, pharmacology, molecular biology and other omics approaches including transcriptomics and metabolomics. This review aims to summarize current trends integrating cell biology and proteomics in plant science. Cell biology approaches are most frequently used in proteomic studies investigating subcellular and developmental proteomes, however, they were also employed in proteomic studies exploring abiotic and biotic stress responses, vesicular transport, cytoskeleton and protein posttranslational modifications. They are used either for detailed cellular or ultrastructural characterization of the object subjected to proteomic study, validation of proteomic results or to expand proteomic data. In this respect, a broad spectrum of methods is employed to support proteomic studies including ultrastructural electron microscopy studies, histochemical staining, immunochemical localization, in vivo imaging of fluorescently tagged proteins and visualization of protein-protein interactions. Thus, cell biological observations on fixed or living cell compartments, cells, tissues and organs are feasible, and in some cases fundamental for the validation and complementation of proteomic data. Validation of proteomic data by independent experimental methods requires development of new complementary approaches. Benefits of cell biology methods and techniques are not sufficiently highlighted in current proteomic studies. This encouraged us to review most popular cell biology methods used in proteomic studies and to evaluate their relevance and potential for proteomic data validation and enrichment of purely proteomic analyses. We also provide examples of representative studies combining proteomic and cell biology methods for various purposes. Integrating cell biology approaches with proteomic ones allow validation and better interpretation of proteomic data. Moreover, cell biology methods remarkably extend the knowledge provided by proteomic studies and might be fundamental for the functional complementation of proteomic data. This review article summarizes current literature linking proteomics with cell biology. Copyright © 2017 Elsevier B.V. All rights reserved.

An Additional Approach to Model Current Followers and Amplifiers with Electronically Controllable Parameters from Commercially Available ICs

NASA Astrophysics Data System (ADS)

Sotner, R.; Kartci, A.; Jerabek, J.; Herencsar, N.; Dostal, T.; Vrba, K.

2012-12-01

Several behavioral models of current active elements for experimental purposes are introduced in this paper. These models are based on commercially available devices. They are suitable for experimental tests of current- and mixed-mode filters, oscillators, and other circuits (employing current-mode active elements) frequently used in analog signal processing without necessity of onchip fabrication of proper active element. Several methods of electronic control of intrinsic resistance in the proposed behavioral models are discussed. All predictions and theoretical assumptions are supported by simulations and experiments. This contribution helps to find a cheaper and more effective way to preliminary laboratory tests without expensive on-chip fabrication of special active elements.

Ice electrode electrolytic cell

DOEpatents

Glenn, D.F.; Suciu, D.F.; Harris, T.L.; Ingram, J.C.

1993-04-06

This invention relates to a method and apparatus for removing heavy metals from waste water, soils, or process streams by electrolytic cell means. The method includes cooling a cell cathode to form an ice layer over the cathode and then applying an electric current to deposit a layer of the heavy metal over the ice. The metal is then easily removed after melting the ice. In a second embodiment, the same ice-covered electrode can be employed to form powdered metals.

Ice electrode electrolytic cell

DOEpatents

Glenn, David F.; Suciu, Dan F.; Harris, Taryl L.; Ingram, Jani C.

1993-01-01

This invention relates to a method and apparatus for removing heavy metals from waste water, soils, or process streams by electrolytic cell means. The method includes cooling a cell cathode to form an ice layer over the cathode and then applying an electric current to deposit a layer of the heavy metal over the ice. The metal is then easily removed after melting the ice. In a second embodiment, the same ice-covered electrode can be employed to form powdered metals.

Methods and compositions for protection of cells and tissues from computed tomography radiation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Grdina, David J.

Described are methods for preventing or inhibiting genomic instability and in cells affected by diagnostic radiology procedures employing ionizing radiation. Embodiments include methods of preventing or inhibiting genomic instability and in cells affected by computed tomography (CT) radiation. Subjects receiving ionizing radiation may be those persons suspected of having cancer, or cancer patients having received or currently receiving cancer therapy, and or those patients having received previous ionizing radiation, including those who are approaching or have exceeded the recommended total radiation dose for a person.

Alternating method applied to edge and surface crack problems

NASA Technical Reports Server (NTRS)

Hartranft, R. J.; Sih, G. C.

1972-01-01

The Schwarz-Neumann alternating method is employed to obtain stress intensity solutions to two crack problems of practical importance: a semi-infinite elastic plate containing an edge crack which is subjected to concentrated normal and tangential forces, and an elastic half space containing a semicircular surface crack which is subjected to uniform opening pressure. The solution to the semicircular surface crack is seen to be a significant improvement over existing approximate solutions. Application of the alternating method to other crack problems of current interest is briefly discussed.

Method of monolithic module assembly

DOEpatents

Gee, James M.; Garrett, Stephen E.; Morgan, William P.; Worobey, Walter

1999-01-01

Methods for "monolithic module assembly" which translate many of the advantages of monolithic module construction of thin-film PV modules to wafered c-Si PV modules. Methods employ using back-contact solar cells positioned atop electrically conductive circuit elements affixed to a planar support so that a circuit capable of generating electric power is created. The modules are encapsulated using encapsulant materials such as EVA which are commonly used in photovoltaic module manufacture. The methods of the invention allow multiple cells to be electrically connected in a single encapsulation step rather than by sequential soldering which characterizes the currently used commercial practices.

Paired Pulse Basis Functions for the Method of Moments EFIE Solution of Electromagnetic Problems Involving Arbitrarily-shaped, Three-dimensional Dielectric Scatterers

NASA Technical Reports Server (NTRS)

MacKenzie, Anne I.; Rao, Sadasiva M.; Baginski, Michael E.

2007-01-01

A pair of basis functions is presented for the surface integral, method of moment solution of scattering by arbitrarily-shaped, three-dimensional dielectric bodies. Equivalent surface currents are represented by orthogonal unit pulse vectors in conjunction with triangular patch modeling. The electric field integral equation is employed with closed geometries for dielectric bodies; the method may also be applied to conductors. Radar cross section results are shown for dielectric bodies having canonical spherical, cylindrical, and cubic shapes. Pulse basis function results are compared to results by other methods.

Method and apparatus for controlling current in inductive loads such as large diameter coils

DOEpatents

Riveros, Carlos A.

1981-01-01

A method and apparatus for controlling electric current in loads that are essentially inductive, such that sparking and "ringing" current problems are reduced or eliminated. The circuit apparatus employs a pair of solid state switches (each of which switch may be an array of connected or parallel solid state switching devices such as transistors) and means for controlling those switches such that a power supply supplying two d.c. voltages (e.g. positive 150 volts d.c. and negative 150 volts d.c.) at low resistance may be connected across an essentially inductive load (e.g. a 6 gauge wire loop one hundred meters in diameter) alternatively and such that the first solid state switch is turned off and the second is turned on such that both are not on at the same time but the first turned on and the other on in less time than the inductive time constant (L/R) so that the load is essentially always presented with a low resistance path across its input. In this manner a steady AC current may be delivered to the load at a frequency desired. Shut-off problems are avoided by gradually shortening the period of switching to less than the time constant so that the maximum energy contained in the inductive load is reduced to approximately zero and dissipated in the inherent resistance. The invention circuit may be employed by adjusting the timing of switching to deliver a desired waveform (such as sinusoidal) to the load.

Employment prospects and trends for gastroenterology trainees in Canada: A nationwide survey

PubMed Central

Razik, Roshan; Cino, Maria; Nguyen, Geoffrey C

2013-01-01

BACKGROUND: Many gastroenterology (GI) trainees face a variety of barriers to stable employment and are finding it increasingly difficult to secure employment in their chosen field. OBJECTIVE: To elucidate factors that contribute to the burden of unemployment and underemployment, and to examine solutions that may remedy this growing problem in the field of GI. METHODS: A nationwide survey of current, incoming and recently graduated individuals of GI training programs in Canada was conducted. Trainees in pediatric GI programs and those enrolled in sub-specialty programs within GI were also included. RESULTS: The response rate was 62%, with 93% of respondents enrolled in an adult GI training program. Many (73%) respondents planned to pursue further subspecialty training and the majority (53%) reported concerns regarding job security after graduation as contributory factors. Only 35% of respondents were confident that they would secure employment within six months of completing their training. Regarding barriers to employment, the most cited perceived reasons were lack of funding (both from hospitals and provincial governments) and senior physicians who continue to practice beyond retirement years. Sixty-nine per cent perceived a greater need for career guidance and 49% believed there were too many GI trainees relative to the current job market in their area. Most residents had a contingency plan if they remained unemployed >18 months, which often included moving to another province or to the United States. CONCLUSION: GI trainees throughout Canada reported substantial concerns about securing employment, citing national retirement trends and lack of funding as primary barriers to employment. Although these issues are not easily modifiable, certain problems should be targeted including optimizing training quotas, tailoring career guidance to the needs of the population, and emphasizing credentialing and quality control in endoscopy. PMID:24199210

Stability-limit "Ouzo region" boundaries for poly(lactide-co-glycolide) nanoparticles prepared by nanoprecipitation.

PubMed

Beck-Broichsitter, Moritz

2016-09-10

The introduction of "Ouzo diagrams" has enhanced the applicability of the basic nanoprecipitation process for drug delivery research. The current study investigated the interaction of two relevant polymer/solvent systems, which is thought to impact the location of the stability-limit "Ouzo boundary". Viscosity measurements (Kurata-Stockmayer-Fixman approach) and static light scattering (Debye method) underlined a distinct interplay of the employed polymer (poly(lactide-co-glycolide)) with the utilized organic solvents (acetone and tetrahydrofuran). Both methods indicated that tetrahydrofuran was the "better" solvent for poly(lactide-co-glycolide). Thus, nanoprecipitation of this polymer/solvent composition resulted in larger nanoparticles. This observation can be attributed to the chain configuration of poly(lactide-co-glycolide) in the organic solvent, which influenced the extent of the break-up of the injected solvent layer. Accordingly, the stability-limit curve of the "Ouzo region" was shifted to lower poly(lactide-co-glycolide) fractions for tetrahydrofuran. Overall, the location of the "Ouzo region", which is an essential tool for drug delivery research, is influenced by the employed organic solvent. The current study described two distinct methods suitable to identify relevant polymer-solvent interactions, which dictate the stability-limit "Ouzo boundary" for relevant poly(lactide-co-glycolide). Copyright © 2016 Elsevier B.V. All rights reserved.

Enzymatic cell disruption of microalgae biomass in biorefinery processes.

PubMed

Demuez, Marie; Mahdy, Ahmed; Tomás-Pejó, Elia; González-Fernández, Cristina; Ballesteros, Mercedes

2015-10-01

When employing biotechnological processes for the procurement of biofuels and bio-products from microalgae, one of the most critical steps affecting economy and yields is the "cell disruption" stage. Currently, enzymatic cell disruption has delivered effective and cost competitive results when compared to mechanical and chemical cell disruption methods. However, the introduction of enzymes implies additional associated cost within the overall process. In order to reduce this cost, autolysis of microalgae is proposed as alternative enzymatic cell disruption method. This review aims to provide the state of the art of enzymatic cell disruption treatments employed in biorefinery processes and highlights the use of endopeptidases. During the enzymatic processes of microalgae life cycle, some lytic enzymes involved in cell division and programmed cell death have been proven useful in performing cell lysis. In this context, the role of endopeptidases is emphasized. Mirroring these natural events, an alternative cell disruption approach is proposed and described with the potential to induce the autolysis process using intrinsic cell enzymes. Integrating induced autolysis within biofuel production processes offers a promising approach to reduce overall global costs and energetic input associated with those of current cell disruption methods. A number of options for further inquiry are also discussed. © 2015 Wiley Periodicals, Inc.

Estimating dead wood during national forest inventories: a review of inventory methodologies and suggestions for harmonization.

PubMed

Woodall, Christopher W; Rondeux, Jacques; Verkerk, Pieter J; Ståhl, Göran

2009-10-01

Efforts to assess forest ecosystem carbon stocks, biodiversity, and fire hazards have spurred the need for comprehensive assessments of forest ecosystem dead wood (DW) components around the world. Currently, information regarding the prevalence, status, and methods of DW inventories occurring in the world's forested landscapes is scattered. The goal of this study is to describe the status, DW components measured, sample methods employed, and DW component thresholds used by national forest inventories that currently inventory DW around the world. Study results indicate that most countries do not inventory forest DW. Globally, we estimate that about 13% of countries inventory DW using a diversity of sample methods and DW component definitions. A common feature among DW inventories was that most countries had only just begun DW inventories and employ very low sample intensities. There are major hurdles to harmonizing national forest inventories of DW: differences in population definitions, lack of clarity on sample protocols/estimation procedures, and sparse availability of inventory data/reports. Increasing database/estimation flexibility, developing common dimensional thresholds of DW components, publishing inventory procedures/protocols, releasing inventory data/reports to international peer review, and increasing communication (e.g., workshops) among countries inventorying DW are suggestions forwarded by this study to increase DW inventory harmonization.

Graphene Mechanics: Current Status and Perspectives.

PubMed

Galiotis, Costas; Frank, Otakar; Koukaras, Emmanuel N; Sfyris, Dimitris

2015-01-01

The mechanical properties of 2D materials such as monolayer graphene are of extreme importance for several potential applications. We summarize the experimental and theoretical results to date on mechanical loading of freely suspended or fully supported graphene. We assess the obtained axial properties of the material in tension and compression and comment on the methods used for deriving the various reported values. We also report on past and current efforts to define the elastic constants of graphene in a 3D representation. Current areas of research that are concerned with the effect of production method and/or the presence of defects upon the mechanical integrity of graphene are also covered. Finally, we examine extensively the work related to the effect of graphene deformation upon its electronic properties and the possibility of employing strained graphene in future electronic applications.

Large deviation function for a driven underdamped particle in a periodic potential

NASA Astrophysics Data System (ADS)

Fischer, Lukas P.; Pietzonka, Patrick; Seifert, Udo

2018-02-01

Employing large deviation theory, we explore current fluctuations of underdamped Brownian motion for the paradigmatic example of a single particle in a one-dimensional periodic potential. Two different approaches to the large deviation function of the particle current are presented. First, we derive an explicit expression for the large deviation functional of the empirical phase space density, which replaces the level 2.5 functional used for overdamped dynamics. Using this approach, we obtain several bounds on the large deviation function of the particle current. We compare these to bounds for overdamped dynamics that have recently been derived, motivated by the thermodynamic uncertainty relation. Second, we provide a method to calculate the large deviation function via the cumulant generating function. We use this method to assess the tightness of the bounds in a numerical case study for a cosine potential.

Current Drive

DOE Office of Scientific and Technical Information (OSTI.GOV)

Faulconer, D.W

2004-03-15

Certain devices aimed at magnetic confinement of thermonuclear plasma rely on the steady flow of an electric current in the plasma. In view of the dominant place it occupies in both the world magnetic-confinement fusion effort and the author's own activity, the tokamak toroidal configuration is selected as prototype for discussing the question of how such a current can be maintained. Tokamaks require a stationary toroidal plasma current, this being traditionally provided by a pulsed magnetic induction which drives the plasma ring as the secondary of a transformer. Since this mechanism is essentially transient, and steady-state fusion reactor operation hasmore » manifold advantages, significant effort is now devoted to developing alternate steady-state means of generating toroidal current. These methods are classed under the global heading of 'noninductive current drive' or simply 'current drive', generally, though not exclusively, employing the injection of waves and/or toroidally directed particle beams. In what follows we highlight the physical mechanisms underlying surprisingly various approaches to driving current in a tokamak, downplaying a number of practical and technical issues. When a significant data base exists for a given method, its experimental current drive efficiency and future prospects are detailed.« less

Employment Opportunities for New Academic Librarians: Assessing the Availability of Entry Level Jobs

ERIC Educational Resources Information Center

Tewell, Eamon C.

2012-01-01

This study examines the availability of entry level positions in academic libraries to better illuminate the status of the job market for current students and recent graduates of Library & Information Science programs. Over a twelve month period from 2010-2011, 1385 job advertisements were collected, with content analysis methods used to evaluate…

Using the FotoFeedback Method to Increase Reflective Learning in the Millennial Generation

ERIC Educational Resources Information Center

Tornabene, Ladona; Nowak, Amy Versnik; Vogelsang, Lisa

2012-01-01

This current generation of students, known as the Millennial Generation, has a propensity toward multi-tasking and a history of structured and tightly filled days. Reflection may not be viewed as productive and as conducive to learning as other "tasks" and thus may be neglected. However, by employing a methodology (photography) that…

Brush potential curve tracer

DOEpatents

Finch, Hilvan A.

1987-01-01

A device for analyzing commutating characteristics of a motor or generator includes a holder for supporting a plurality of probes adjacent a brush of the motor or generator. Measurements of electrical current characteristics in each of the probes provides information useful in analyzing operation of the machine. Methods for employing a device in accordance with the invention are also disclosed.

Language, Academic, Socio-Cultural and Financial Adjustments of Mainland Chinese Students Studying in Hong Kong

ERIC Educational Resources Information Center

Cheung, Alan C. K.

2013-01-01

Purpose: The purpose of this paper is to examine language, academic, social-cultural and financial adjustments facing mainland Chinese students in Hong Kong. Design/methodology/approach: The current study employed both quantitative and qualitative methods and included over 300 mainland Chinese students from seven major universities in Hong Kong.…

Planning a Teaching Sequence for the Teaching of Chemical Bonding

ERIC Educational Resources Information Center

Sibanda, Doras; Hobden, Paul

2015-01-01

The current study seeks to examine how teachers plan teaching sequences to teach chemical bonding in the senior secondary phase of schooling. The study employs a learning demand tool as interpretive framework. A mixed method was used to guide the collection of data. Data were collected through a survey instrument with 227 practising physical…

Prognostics Uncertainty Management with Application to Government and Industry

NASA Technical Reports Server (NTRS)

Celaya, Jose; Sankararaman, Shankar; Daigle, Matthew; Saxena, Abhinav; Goebel, Kai

2014-01-01

Predictions about the future are contingent on future usage, but also on the quality of the models employed and the assessment of the current health state. These factors, amongst others, need to be considered to arrive at a prediction that is conducted through a rigorous method but where the confidence bounds are not prohibitively large.

Time-Dependent Temperature Measurements in Post-Detonation Combustion: Current State-of-the-Art Methods and Emerging Technologies

DTIC Science & Technology

2016-03-01

17 6. SENSOR PARTICLES...explosion also limit measurement options since any sensors employed must be able to withstand the extreme environment, or at least transmit the...in detonations and fireballs. On the other hand, temperature measurements have been less extensive, partly because sensors rugged enough to withstand

Job Satisfaction, Quality of Work Life and Work Motivation in Employees with Intellectual Disability: A Systematic Review

ERIC Educational Resources Information Center

Kocman, Andreas; Weber, Germain

2018-01-01

Background: Current research on employment options for people with Intellectual Disability emphasizes the importance of employee needs and satisfaction. The study aims at systematically reviewing the literature on job satisfaction and related constructs. Methods: A systematic literature search was conducted. Studies were included if (i) they are…

The Effects of CMC Applications on ESL Writing Anxiety among Postgraduate Students

ERIC Educational Resources Information Center

Hussin, Supyan; Abdullah, Mohamad Yahya; Ismail, Noriah; Yoke, Soo Kum

2015-01-01

This study investigates the effects of the CMC applications on the ESL/EFL writing anxiety. This is a descriptive study using a mixed-method that adopted both quantitative and qualitative approaches. Three instruments were employed to answer the research questions of the current study which are Second Language Writing Anxiety Inventory (SLWAI),…

Subjective economic status, sex role attitudes, fertility, and mother's work.

PubMed

Moon, C

1987-07-01

Data were drawn from the General Social Survey conducted by the National Opinion Research Center (NORC) in 1985 to observe the effect of subjective economic status and sex role attitude on fertility and mother's work, controlling for major influential variables such as household resources, individual characteristics, and place of residence. A multiple regression method was used to examine factors affecting the employment status of currently married mothers. The study objective was to develop the household resources model by adding the subjective economic status, i.e., economic status as perceived by a mother, and to observe how a wife's work as a coping strategy varies with the current number of children and sex role attitudes, when controlling for other explanatory variables -- including the subjective economic status. The 274 study subjects were currently married women with 1 or more children and ranging in age from 18-55 years. The effect of age on women's employment was not "so" significant, i.e., there were conflicting findings on the curvilinear effect of age. The effect of wives' education was not significant at a 95% confidence level in all regression equations. Race was negatively correlated to the probability of married women. The effect of race on women's employment was not significant at .05 level for all regressions. Region had no effect on women's entry into gainful employment. The effect of current number of children was significant at a 95% confidence level before controlling for subjective economic status and sex role attitude, but its effect on women's employment was insignificant when 2 types of additional explanatory variables were introduced independently or together. The regression analysis revealed a neutral effect of husbands' occupational prestige on employment status. The observed regression coefficient revealed that the possibility of women's employment will increase by 2% when the annual family income from other sources decreases by $1000. The analysis provides evidence in support of the household resources model and Oppenheimer's economic squeezes model. The inclusion of sex role attitude in the regression model did not affect the magnitude of impact of subjective economic status on mother's employment. Financial status had a significant influence on women's working status. The influence of sex role attitude on mother's working was not significant at a 95% confidence level, but the deletion of subjective economic status variables did increase a confidence level of significance from 0.82 to 0.89, indicating the feasible interaction between sex role attitude and economic squeezes.

Measurements of respiratory illness among construction painters.

PubMed

White, M C; Baker, E L

1988-08-01

The prevalence of different measurements of respiratory illness among construction painters was examined and the relation between respiratory illness and employment as a painter assessed in a cross sectional study of current male members of two local affiliates of a large international union of painters. Respiratory illness was measured by questionnaire and spirometry. Longer employment as a painter was associated with increased prevalence of chronic obstructive disease and an interactive effect was observed for smoking and duration of employment as a painter. Multiple regression analysis showed a significant association between years worked as a painter and a decrement in FEV1 equal to about 11 ml for each year worked. This association was larger among painters who had smoked. The prevalence of chronic bronchitis was significantly associated with increased use of spray application methods.

Estimation of plasma ion saturation current and reduced tip arcing using Langmuir probe harmonics.

PubMed

Boedo, J A; Rudakov, D L

2017-03-01

We present a method to calculate the ion saturation current, I sat , for Langmuir probes at high frequency (>100 kHz) using the harmonics technique and we compare that to a direct measurement of I sat . It is noted that the I sat estimation can be made directly by the ratio of harmonic amplitudes, without explicitly calculating T e . We also demonstrate that since the probe tips using the harmonic method are oscillating near the floating potential, drawing little power, this method reduces tip heating and arcing and allows plasma density measurements at a plasma power flux that would cause continuously biased tips to arc. A multi-probe array is used, with two spatially separated tips employing the harmonics technique and measuring the amplitude of at least two harmonics per tip. A third tip, located between the other two, measures the ion saturation current directly. We compare the measured and calculated ion saturation currents for a variety of plasma conditions and demonstrate the validity of the technique and its use in reducing arcs.

Estimation of plasma ion saturation current and reduced tip arcing using Langmuir probe harmonics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Boedo, J. A.; Rudakov, D. L.

Here we present a method to calculate the ion saturation current, I sat, for Langmuir probes at high frequency (>100 kHz) using the harmonics technique and we compare that to a direct measurement of I sat. It is noted that the Isat estimation can be made directly by the ratio of harmonic amplitudes, without explicitly calculating T e. We also demonstrate that since the probe tips using the harmonic method are oscillating near the floating potential, drawing little power, this method reduces tip heating and arcing and allows plasma density measurements at a plasma power flux that would cause continuouslymore » biased tips to arc. A multi-probe array is used, with two spatially separated tips employing the harmonics technique and measuring the amplitude of at least two harmonics per tip. A third tip, located between the other two, measures the ion saturation current directly. We compare the measured and calculated ion saturation currents for a variety of plasma conditions and demonstrate the validity of the technique and it’s use in reducing arcs.« less

Estimation of plasma ion saturation current and reduced tip arcing using Langmuir probe harmonics

DOE PAGES

Boedo, J. A.; Rudakov, D. L.

2017-03-20

Here we present a method to calculate the ion saturation current, I sat, for Langmuir probes at high frequency (>100 kHz) using the harmonics technique and we compare that to a direct measurement of I sat. It is noted that the Isat estimation can be made directly by the ratio of harmonic amplitudes, without explicitly calculating T e. We also demonstrate that since the probe tips using the harmonic method are oscillating near the floating potential, drawing little power, this method reduces tip heating and arcing and allows plasma density measurements at a plasma power flux that would cause continuouslymore » biased tips to arc. A multi-probe array is used, with two spatially separated tips employing the harmonics technique and measuring the amplitude of at least two harmonics per tip. A third tip, located between the other two, measures the ion saturation current directly. We compare the measured and calculated ion saturation currents for a variety of plasma conditions and demonstrate the validity of the technique and it’s use in reducing arcs.« less

Scientific Production of Research Fellows at the Zagreb University School of Medicine, Croatia

PubMed Central

Polašek, Ozren; Kolčić, Ivana; Buneta, Zoran; Čikeš, Nada; Pećina, Marko

2006-01-01

Aim To evaluate scientific production among research fellows employed at the Zagreb University School of Medicine and identify factors associated with their scientific output. Method We conducted a survey among research fellows and their mentors during June 2005. The main outcome measure was publication success, defined for each fellow as publishing at least 0.5 articles per employment year in journals indexed in the Current Contents bibliographic database. Bivariate methods and binary logistic regression were used in data analysis. Results A total of 117 fellows (response rate 95%) and 83 mentors (100%) were surveyed. The highest scientific production was recorded among research fellows employed in public health departments (median 3.0 articles, interquartile range 4.0), compared with those from pre-clinical (median 0.0, interquartile range 2.0) and clinical departments (median 1.0, interquartile range 2.0) (Kruskal-Wallis, P = 0.003). A total of 36 (29%) research fellows published at least 0.5 articles per employment year and were considered successful. Three variables were associated with fellows’ publication success: mentor’s scientific production (odds ratio [OR], 3.14; 95% confidence interval [CI], 1.31-7.53), positive mentor’s assessment (OR, 3.15; 95% CI, 1.10-9.05), and fellows’ undergraduate publication in journals indexed in the Current Contents bibliographic database (OR, 4.05; 95% CI, 1.07-15.34). Conclusion Undergraduate publication could be used as one of the main criteria in selecting research fellows. One of the crucial factors in a fellow’s scientific production and career advancement is mentor’s input, which is why research fellows would benefit most from working with scientifically productive mentors. PMID:17042070

A theoretical study on tunneling based biosensor having a redox-active monolayer using physics based simulation

NASA Astrophysics Data System (ADS)

Kim, Kyoung Yeon; Lee, Won Cheol; Yun, Jun Yeon; Lee, Youngeun; Choi, Seoungwook; Jin, Seonghoon; Park, Young June

2018-01-01

We developed a numerical simulator to model the operation of a tunneling based biosensor which has a redox-active monolayer. The simulator takes a realistic device structure as a simulation domain, and it employs the drift-diffusion equation for ion transport, the non-equilibrium Green's function formalism for electron tunneling, and the Ramo-Shockley theorem for accurate calculation of non-faradaic current. We also accounted for the buffer reaction and the immobilized peptide layer. For efficient transient simulation, the implicit time integration scheme is employed where the solution at each time step is obtained from the coupled Newton-Raphson method. As an application, we studied the operation of a recently fabricated reference-electrode free biosensor in various bias conditions and confirmed the effect of buffer reaction and the current flowing mechanism. Using the simulator, we also found a strategy to maximize the sensitivity of the tunneling based sensor.

Patient–physician communication about work-related asthma: what we do and do not know

PubMed Central

Mazurek, Jacek M.; White, Gretchen E.; Moorman, Jeanne E.; Storey, Eileen

2015-01-01

Background Effective patient–physician communication is the key component of the patient–physician relationship. Objective To assess the proportion of ever-employed adults with current asthma who talked about asthma associated with work with their physician or other health professional and to identify factors associated with this communication. Methods The 2006 to 2010 Behavioral Risk Factor Surveillance System Asthma Call-Back Survey data from 40 states and the District of Columbia for ever-employed adults (≥18 years old) with current asthma (N = 50,433) were examined. Multivariable logistic regression analyses were conducted to identify factors associated with communication with a health professional about asthma and work. Results Among ever-employed adults with current asthma, 9.1% were ever told by a physician that their asthma was related to any job they ever had and 11.7% ever told a physician or other health professional that this was the case. When responses to the 2 questions were combined, the proportion of those who communicated with a health professional about asthma and work was 14.7%. Communication with a health professional about asthma and work was associated with age, race or ethnicity, employment, education, income, insurance, and urgent treatment for worsening asthma. Conclusion A small proportion of patients with asthma might communicate with a health professional about asthma associated with work. Future studies should examine whether patients with asthma ever discussed with a health professional the possibility that their asthma might be related to work to provide information on the frequency of patient–clinician communication about asthma related to work. PMID:25492097

Will there be a pharmacy leadership crises? An ASHP Foundation Scholar-in-residence report.

PubMed

White, Sara J

2005-04-15

Health-system pharmacy directors, managers, practitioners, students, and employers were surveyed to assess the situation of current and future leaders in pharmacy and generate recommendations for preventing shortages. Online surveys were sent to pharmacy directors, pharmacy middle managers, current pharmacy practitioners pharmacy students, and employers recruiting for management positions using ASHP's membership and CareerPharm databases. Directors, managers, and practitioners were asked about their job satisfaction and future plans. The trends in demographics and attitudes toward the balance between family and work were assessed among directors, managers, practitioners, and students. Employers were asked about their perceived ease of filling managerial positions. While most pharmacy directors and middle managers were satisfied with their current positions, 80% of directors and 77% of middle managers anticipated leaving their jobs in the next decade. Men comprised 72% of directors, 50% of middle managers, 62% of practitioners, and 21% of pharmacy students. The majority of pharmacy students and practitioners reported being married to a working spouse and having children and expressed a desire to balance their personal life with their career. The top reasons cited by students and practitioners for not seeking leadership positions were having to give up clinical practice and competing responsibilities. More than half of employers felt it was more difficult to recruit managers now than it was three years ago. A significant gap in pharmacy leadership in the next 5-10 years is expected, as well as a shift in work force composition and attitude. Mentoring and residencies are important methods of fostering new leaders in the profession.

Automatic Train Operation Using Autonomic Prediction of Train Runs

NASA Astrophysics Data System (ADS)

Asuka, Masashi; Kataoka, Kenji; Komaya, Kiyotoshi; Nishida, Syogo

In this paper, we present an automatic train control method adaptable to disturbed train traffic conditions. The proposed method presumes transmission of detected time of a home track clearance to trains approaching to the station by employing equipment of Digital ATC (Automatic Train Control). Using the information, each train controls its acceleration by the method that consists of two approaches. First, by setting a designated restricted speed, the train controls its running time to arrive at the next station in accordance with predicted delay. Second, the train predicts the time at which it will reach the current braking pattern generated by Digital ATC, along with the time when the braking pattern transits ahead. By comparing them, the train correctly chooses the coasting drive mode in advance to avoid deceleration due to the current braking pattern. We evaluated the effectiveness of the proposed method regarding driving conditions, energy consumption and reduction of delays by simulation.

Large reflector antenna study

NASA Technical Reports Server (NTRS)

Christodoulou, C. G.

1986-01-01

In some applications, the wires used to construct the grids are plated over with highly conducting materials such as gold or silver. In those cases, depending on the frequency of operation, the coating may not be thick enough to prevent currents from flowing in the substrate. The conjugate gradient method, in conjunction with the fast Fourier transform is employed to solve the problem of scattering from such rectangular grids. An internal impedance is utilized to account for the effects of the substrate conductivity on the induced current densities. Calculated values of the reflection coefficient and induced currents from different coating thicknesses, angles of incidence and polarizations are presented and discussed.

Tunneling current spectroscopy of a nanostructure junction involving multiple energy levels.

PubMed

Kuo, David M-T; Chang, Yia-Chung

2007-08-24

A multilevel Anderson model is employed to simulate the system of a nanostructure tunnel junction with any number of one-particle energy levels. The tunneling current, including both shell-tunneling and shell-filling cases, is theoretically investigated via the nonequilibrium Green's function method. We obtain a closed form for the spectral function, which is used to analyze the complicated tunneling current spectra of a quantum dot or molecule embedded in a double-barrier junction. We also show that negative differential conductance can be observed in a quantum dot tunnel junction when the Coulomb interactions with neighboring quantum dots are taken into account.

Addressing Obesity in the Workplace: The Role of Employers

PubMed Central

Heinen, Luann; Darling, Helen

2009-01-01

Context: Employers have pursued many strategies over the years to control health care costs and improve care. Disappointed by efforts to manage costs through the use of insurance-related techniques (e.g., prior authorization, restricted provider networks), employers have also begun to try to manage health by addressing their employees' key lifestyle risks. Reducing obesity (along with tobacco use and inactivity) is a priority for employers seeking to lower the incidence and severity of chronic illness and the associated demand for health services. Methods: This article describes the employer's perspective on the cost impact of obesity, discusses current practices in employer-sponsored wellness and weight management programs, provides examples from U.S. companies illustrating key points of employers' leverage and opportunities, and suggests policy directions to support the expansion of employers' initiatives, especially for smaller employers. Findings: Researchers and policymakers often overlook the extensive efforts and considerable impact of employer-sponsored wellness and health improvement programs. Greater focus on opportunities in the workplace is merited, however, for the evidence base supporting the economic and health impacts of employer-sponsored health promotion and wellness is growing, although not as quickly as the experience base of large employers. Conclusions: Public and private employers can serve their own economic interests by addressing obesity. Health care organizations, particularly hospitals, as well as public employers can be important role models. Policy development is needed to accelerate change, especially for smaller employers (those with fewer than 500 employees), which represent the majority of U.S. employers and are far less likely to offer health promotion programs. PMID:19298417

Employer Policies and Practices to Manage and Prevent Disability: Conclusion to the Special Issue.

PubMed

Main, Chris J; Shaw, William S

2016-12-01

Purpose Research of employer policies and practices to manage and prevent disability spans many disciplines and perspectives, and there are many challenges related to stakeholder collaboration, data access, and interventions. The purpose of this article is to synthesize the findings from a conference and year-long collaboration among a group of invited researchers intended to spur new research innovations in this field. Methods A multidisciplinary team of 26 international researchers with published research in employer-based disability management or related fields were invited to attend a 3-day conference in Hopkinton, Massachusetts, USA. The conference goals were to review the status of current research of workplace disability management and prevention, examine its relevance for employer decision-making, compare conceptual frameworks or theoretical perspectives, and recommend future research directions. In this paper, we summarize key points from the 6 resulting papers, compare them with an earlier 2005 conference on improving return-to-work research, and conclude with recommendations for further overarching research directions. Results/Conclusion In comparison with the 2005 conference, a greater emphasis was placed on organizational and social factors, employer roles and responsibilities, methods of implementation, non-clinical approaches, and facilitating stay-at-work as well as return-to-work. A special panel of employer consultants and representatives who were featured at the 2015 conference reinforced the importance of organizational culture, leadership style, and financial decision-making strategies at the employer level. Based on the conference proceedings, we recommend that future research in this area should strive for: (a) broader inclusion of workers and workplaces; (b) attention to multilevel influences in the workplace; (c) a focus on social as well as physical aspects of work; (d) earlier employer collaboration efforts; (e) more attention to implementation factors; and (f) a broader assessment of possible outcome domains.

Surgical adhesives in ophthalmology: history and current trends.

PubMed

Guhan, Samantha; Peng, Si-Liang; Janbatian, Hrag; Saadeh, Stephanie; Greenstein, Stephen; Al Bahrani, Faisal; Fadlallah, Ali; Yeh, Tsai-Chu; Melki, Samir A

2018-03-26

Tissue adhesives are gaining popularity in ophthalmology, as they could potentially reduce the complications associated with current surgical methods. An ideal tissue adhesive should have superior tensile strength, be non-toxic and anti-inflammatory, improve efficiency and be cost-effective. Both synthetic and biological glues are available. The primary synthetic glues include cyanoacrylate and the recently introduced polyethylene glycol (PEG) derivatives, while most biological glues are composed of fibrin. Cyanoacrylate has a high tensile strength, but rapidly polymerises upon contact with any fluid and has been associated with histotoxicity. Fibrin induces less toxic and inflammatory reactions, and its polymerisation time can be controlled. Tensile strength studies have shown that fibrin is not as strong as cyanoacrylate. While more research is needed, PEG variants currently appear to have the most promise. These glues are non-toxic, strong and time-effective. Through MEDLINE and internet searches, this paper presents a systematic review of the current applications of surgical adhesives to corneal, glaucoma, retinal, cataract and strabismus surgeries. Our review suggests that surgical adhesives have promise to reduce problems in current ophthalmic surgical procedures. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Novel hermetic packaging methods for MOEMS

NASA Astrophysics Data System (ADS)

Stark, David

2003-01-01

Hermetic packaging of micro-optoelectromechanical systems (MOEMS) is an immature technology, lacking industry-consensus methods and standards. Off-the-shelf, catalog window assemblies are not yet available. Window assemblies are in general custom designed and manufactured for each new product, resulting in longer than acceptable cycle times, high procurement costs and questionable reliability. There are currently two dominant window-manufacturing methods wherein a metal frame is attached to glass, as well as a third, less-used method. The first method creates a glass-to-metal seal by heating the glass above its Tg to fuse it to the frame. The second method involves first metallizing the glass where it is to be attached to the frame, and then soldering the glass to the frame. The third method employs solder-glass to bond the glass to the frame. A novel alternative with superior features compared to the three previously described window-manufacturing methods is proposed. The new approach lends itself to a plurality of glass-to-metal attachment techniques. Benefits include lower temperature processing than two of the current methods and potentially more cost-effective manufacturing than all three of today"s attachment methods.

Toward Intelligent Autonomous Agents for Cyber Defense: Report of the 2017 Workshop by the North Atlantic Treaty Organization (NATO) Research Group IST-152 RTG

DTIC Science & Technology

2018-04-18

Significant research is currently conducted on dynamic learning and threat detection. However, this work is held back by gaps in validation methods ...and network path rotation (e.g., Stream Splitting MTD). Agents can also employ various cyber-deception methods , including direct observation hiding...ARL-SR-0395 ● APR 2018 US Army Research Laboratory Toward Intelligent Autonomous Agents for Cyber Defense: Report of the 2017

Toward Intelligent Autonomous Agents for Cyber Defense: Report of the 2017 Workshop by the North Atlantic Treaty Organization (NATO) Research Group IST-152-RTG

DTIC Science & Technology

2018-04-01

Significant research is currently conducted on dynamic learning and threat detection. However, this work is held back by gaps in validation methods ...and network path rotation (e.g., Stream Splitting MTD). Agents can also employ various cyber-deception methods , including direct observation hiding...ARL-SR-0395 ● APR 2018 US Army Research Laboratory Toward Intelligent Autonomous Agents for Cyber Defense: Report of the 2017

Complex absorbing potential based Lorentzian fitting scheme and time dependent quantum transport.

PubMed

Xie, Hang; Kwok, Yanho; Jiang, Feng; Zheng, Xiao; Chen, GuanHua

2014-10-28

Based on the complex absorbing potential (CAP) method, a Lorentzian expansion scheme is developed to express the self-energy. The CAP-based Lorentzian expansion of self-energy is employed to solve efficiently the Liouville-von Neumann equation of one-electron density matrix. The resulting method is applicable for both tight-binding and first-principles models and is used to simulate the transient currents through graphene nanoribbons and a benzene molecule sandwiched between two carbon-atom chains.

FBI fingerprint identification automation study: AIDS 3 evaluation report. Volume 5: Current system evaluation

NASA Technical Reports Server (NTRS)

Mulhall, B. D. L.

1980-01-01

The performance, costs, organization and other characteristics of both the manual system and AIDS 2 were used to establish a baseline case. The results of the evaluation are to be used to determine the feasibility of the AIDS 3 System, as well as provide a basis for ranking alternative systems during the second phase of the JPL study. The results of the study were tabulated by subject, scope and methods, providing a descriptive, quantitative and qualitative analysis of the current operating systems employed by the FBI Identification Division.

Leading article: Use of smartphones to pass on information about patients - what are the current issues?

PubMed

Rokadiya, S; McCaul, J A; Mitchell, D A; Brennan, P A

2016-07-01

Many doctors now use mobile devices such as smartphones to communicate with one another about their patients, and sometimes this is without the knowledge and approval of their employer. We know of little information about the use of texting and other web-based messaging services by doctors in hospitals, so we reviewed relevant published studies to assess the safety and usefulness of current methods of digital communication. Copyright © 2016 The British Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

Ballistic-Electron-Emission Microscope

NASA Technical Reports Server (NTRS)

Kaiser, William J.; Bell, L. Douglas

1990-01-01

Ballistic-electron-emission microscope (BEEM) employs scanning tunneling-microscopy (STM) methods for nondestructive, direct electrical investigation of buried interfaces, such as interface between semiconductor and thin metal film. In BEEM, there are at least three electrodes: emitting tip, biasing electrode, and collecting electrode, receiving current crossing interface under investigation. Signal-processing device amplifies electrode signals and converts them into form usable by computer. Produces spatial images of surface by scanning tip; in addition, provides high-resolution images of buried interface under investigation. Spectroscopic information extracted by measuring collecting-electrode current as function of one of interelectrode voltages.

A review of microdialysis coupled to microchip electrophoresis for monitoring biological events

PubMed Central

Saylor, Rachel A.; Lunte, Susan M.

2015-01-01

Microdialysis is a powerful sampling technique that enables monitoring of dynamic processes in vitro and in vivo. The combination of microdialysis with chromatographic or electrophoretic methods yields along with selective detection methods yields a “separation-based sensor” capable of monitoring multiple analytes in near real time. Analysis of microdialysis samples requires techniques that are fast (<1 min), have low volume requirements (nL–pL), and, ideally, can be employed on-line. Microchip electrophoresis fulfills these requirements and also permits the possibility of integrating sample preparation and manipulation with detection strategies directly on-chip. Microdialysis coupled to microchip electrophoresis has been employed for monitoring biological events in vivo and in vitro. This review discusses technical considerations for coupling microdialysis sampling and microchip electrophoresis, including various interface designs, and current applications in the field. PMID:25637011

An exploration of the data collection methods utilised with children, teenagers and young people (CTYPs).

PubMed

Flanagan, Sarah M; Greenfield, Sheila; Coad, Jane; Neilson, Susan

2015-03-01

The impact of cancer upon children, teenagers and young people can be profound. Research has been undertaken to explore the impacts upon children, teenagers and young people with cancer, but little is known about how researchers can 'best' engage with this group to explore their experiences. This review paper provides an overview of the utility of data collection methods employed when undertaking research with children, teenagers and young people. A systematic review of relevant databases was undertaken utilising the search terms 'young people', 'young adult', 'adolescent' and 'data collection methods'. The full-text of the papers that were deemed eligible from the title and abstract were accessed and following discussion within the research team, thirty papers were included. Due to the heterogeneity in terms of the scope of the papers identified the following data collections methods were included in the results section. Three of the papers identified provided an overview of data collection methods utilised with this population and the remaining twenty seven papers covered the following data collection methods: Digital technologies; art based research; comparing the use of 'paper and pencil' research with web-based technologies, the use of games; the use of a specific communication tool; questionnaires and interviews; focus groups and telephone interviews/questionnaires. The strengths and limitations of the range of data collection methods included are discussed drawing upon such issues as of the appropriateness of particular methods for particular age groups, or the most appropriate method to employ when exploring a particularly sensitive topic area. There are a number of data collection methods utilised to undertaken research with children, teenagers and young adults. This review provides a summary of the current available evidence and an overview of the strengths and limitations of data collection methods employed.

Analysis of phase error effects in multishot diffusion-prepared turbo spin echo imaging

PubMed Central

Cervantes, Barbara; Kooijman, Hendrik; Karampinos, Dimitrios C.

2017-01-01

Background To characterize the effect of phase errors on the magnitude and the phase of the diffusion-weighted (DW) signal acquired with diffusion-prepared turbo spin echo (dprep-TSE) sequences. Methods Motion and eddy currents were identified as the main sources of phase errors. An analytical expression for the effect of phase errors on the acquired signal was derived and verified using Bloch simulations, phantom, and in vivo experiments. Results Simulations and experiments showed that phase errors during the diffusion preparation cause both magnitude and phase modulation on the acquired data. When motion-induced phase error (MiPe) is accounted for (e.g., with motion-compensated diffusion encoding), the signal magnitude modulation due to the leftover eddy-current-induced phase error cannot be eliminated by the conventional phase cycling and sum-of-squares (SOS) method. By employing magnitude stabilizers, the phase-error-induced magnitude modulation, regardless of its cause, was removed but the phase modulation remained. The in vivo comparison between pulsed gradient and flow-compensated diffusion preparations showed that MiPe needed to be addressed in multi-shot dprep-TSE acquisitions employing magnitude stabilizers. Conclusions A comprehensive analysis of phase errors in dprep-TSE sequences showed that magnitude stabilizers are mandatory in removing the phase error induced magnitude modulation. Additionally, when multi-shot dprep-TSE is employed the inconsistent signal phase modulation across shots has to be resolved before shot-combination is performed. PMID:28516049

Thermodynamics of quantum information scrambling

NASA Astrophysics Data System (ADS)

Campisi, Michele; Goold, John

2017-06-01

Scrambling of quantum information can conveniently be quantified by so-called out-of-time-order correlators (OTOCs), i.e., correlators of the type <[Wτ,V ] †[Wτ,V ] > , whose measurements present a formidable experimental challenge. Here we report on a method for the measurement of OTOCs based on the so-called two-point measurement scheme developed in the field of nonequilibrium quantum thermodynamics. The scheme is of broader applicability than methods employed in current experiments and provides a clear-cut interpretation of quantum information scrambling in terms of nonequilibrium fluctuations of thermodynamic quantities, such as work and heat. Furthermore, we provide a numerical example on a spin chain which highlights the utility of our thermodynamic approach when understanding the differences between integrable and ergodic behaviors. We also discuss how the method can be used to extend the reach of current experiments.

20 CFR 216.14 - Regular non-railroad employment that will not break a current connection.

Code of Federal Regulations, 2011 CFR

2011-04-01

... break a current connection. 216.14 Section 216.14 Employees' Benefits RAILROAD RETIREMENT BOARD REGULATIONS UNDER THE RAILROAD RETIREMENT ACT ELIGIBILITY FOR AN ANNUITY Current Connection With the Railroad Industry § 216.14 Regular non-railroad employment that will not break a current connection. Regular non...

20 CFR 216.14 - Regular non-railroad employment that will not break a current connection.

Code of Federal Regulations, 2010 CFR

2010-04-01

... break a current connection. 216.14 Section 216.14 Employees' Benefits RAILROAD RETIREMENT BOARD REGULATIONS UNDER THE RAILROAD RETIREMENT ACT ELIGIBILITY FOR AN ANNUITY Current Connection With the Railroad Industry § 216.14 Regular non-railroad employment that will not break a current connection. Regular non...

Forging Paths through Hostile Territory: Intersections of Women's Identities Pursuing Post-Secondary Computing Education

ERIC Educational Resources Information Center

Ratnabalasuriar, Sheruni

2012-01-01

This study explores experiences of women as they pursue post-secondary computing education in various contexts. Using in-depth interviews, the current study employs qualitative methods and draws from an intersectional approach to focus on how the various barriers emerge for women in different types of computing cultures. In-depth interviews with…

Creating an Adaptive Technology Using a Cheminformatics System to Read Aloud Chemical Compound Names for People with Visual Disabilities

ERIC Educational Resources Information Center

Kamijo, Haruo; Morii, Shingo; Yamaguchi, Wataru; Toyooka, Naoki; Tada-Umezaki, Masahito; Hirobayashi, Shigeki

2016-01-01

Various tactile methods, such as Braille, have been employed to enhance the recognition ability of chemical structures by individuals with visual disabilities. However, it is unknown whether reading aloud the names of chemical compounds would be effective in this regard. There are no systems currently available using an audio component to assist…

Experiential Growth Group in Counselor Education: A Review of Its Pedagogy, Research, and Ethical Dilemmas

ERIC Educational Resources Information Center

Zhu, Peitao

2018-01-01

The experiential growth group (EGG) is a common pedagogical activity employed in counselor education and is required by CACREP and ASGW standards. However, various parameters of such a training modality were not specified. The author first reviewed the multitude of current EGG delivery methods and student experiences in EGG. Then, 3 aspects of the…

The Impact of a Career Development Course on Professionalism for College Students; Experiential Compared to Traditional Teaching Methods

ERIC Educational Resources Information Center

Stark, Brian

2010-01-01

Within an ever-evolving society, the social environment within the workplace continues to be an arena of conflict between currently held professional decorum and the up and coming trends of a laid-back popular culture. Increasing numbers of under-prepared students are exhibiting unprofessional behavior and skills while searching for employment.…

An Exploratory Study of Advancing Mobilization in the Life Insurance Industry: The Case of Taiwan's Nan Shan Life Insurance Corporation.

ERIC Educational Resources Information Center

Luarn, Pin; Lin, Tom M. Y.; Lo, Peter K. Y.

2003-01-01

Employs a case study method, using in-depth interviews of 29 corporate managers and experts, to understand the current state of mobilization in the life insurance industry. Suggests a conceptual framework and formulates possible research propositions incorporating several variables. Suggests 10 key success factors for implementing mobilization in…

Quantifying allometric model uncertainty for plot-level live tree biomass stocks with a data-driven, hierarchical framework

Treesearch

Brian J. Clough; Matthew B. Russell; Grant M. Domke; Christopher W. Woodall

2016-01-01

Accurate uncertainty assessments of plot-level live tree biomass stocks are an important precursor to estimating uncertainty in annual national greenhouse gas inventories (NGHGIs) developed from forest inventory data. However, current approaches employed within the United States’ NGHGI do not specifically incorporate methods to address error in tree-scale biomass...

The Current State of Arts Education in Iran: A Case Study in Two Elementary Schools Using Educational Criticism

ERIC Educational Resources Information Center

Nouri, Ali; Farsi, Soheila

2018-01-01

The central aim of this study is to evaluate the effectiveness of the recently revised elementary curriculum for arts education in Iran. The study employed an educational criticism method and was conducted in two elementary schools. Data were collected by observation, semi-structured interviews and curriculum documents over a four-month period.…

Evaluating ICT Integration in Turkish K-12 Schools through Teachers' Views

ERIC Educational Resources Information Center

Aydin, Mehmet Kemal; Gürol, Mehmet; Vanderlinde, Ruben

2016-01-01

The current study aims to explore ICT integration in Turkish K-12 schools purposively selected as a representation of F@tih and non-F@tih public schools together with a private school. A convergent mixed methods design was employed with a multiple case strategy as such it will enable to make casewise comparisons. The quantitative data was…

Effect of mechanical site preparation treatments on oak survival in a retired field afforestation effort -- first-year results

Treesearch

Andrew B. Self; Andrew W. Ezell; Damon B. Hollis; Derek. Alkire

2011-01-01

Mechanical site preparation is frequently proposed to alleviate poor soil conditions when afforesting retired agricultural fields. Without management of soil problems, oak seedlings planted in these areas may exhibit poor survival. While mechanical site preparation methods currently employed in hardwood afforestation are proven, there is a substantial void in research...

Alumni Job Search Strategies, Class of 2011. GMAC[R] Data-to-Go Series

ERIC Educational Resources Information Center

Graduate Management Admission Council, 2012

2012-01-01

Examining the job search strategies and employment outcomes for Class of 2011 graduate business school alumni sheds light on current job market trends and the effort required to secure a first job after earning a graduate business degree. This fact sheet highlights the job search methods used by Class of 2011 business school graduates as reported…

Polymeric Packaging for Fully Implantable Wireless Neural Microsensors

PubMed Central

Aceros, Juan; Yin, Ming; Borton, David A.; Patterson, William R.; Bull, Christopher; Nurmikko, Arto V.

2014-01-01

We present polymeric packaging methods used for subcutaneous, fully implantable, broadband, and wireless neurosensors. A new tool for accelerated testing and characterization of biocompatible polymeric packaging materials and processes is described along with specialized test units to simulate our fully implantable neurosensor components, materials and fabrication processes. A brief description of the implantable systems is presented along with their current encapsulation methods based on polydimethylsiloxane (PDMS). Results from in-vivo testing of multiple implanted neurosensors in swine and non-human primates are presented. Finally, a novel augmenting polymer thin film material to complement the currently employed PDMS is introduced. This thin layer coating material is based on the Plasma Enhanced Chemical Vapor Deposition (PECVD) process of Hexamethyldisiloxane (HMDSO) and Oxygen (O2). PMID:23365999

High Efficiency, Low Distortion 3D Diffusion Tensor Imaging with Variable Density Spiral Fast Spin Echoes (3D DW VDS RARE)

PubMed Central

Frank, Lawrence R.; Jung, Youngkyoo; Inati, Souheil; Tyszka, J. Michael; Wong, Eric C.

2009-01-01

We present an acquisition and reconstruction method designed to acquire high resolution 3D fast spin echo diffusion tensor images while mitigating the major sources of artifacts in DTI - field distortions, eddy currents and motion. The resulting images, being 3D, are of high SNR, and being fast spin echoes, exhibit greatly reduced field distortions. This sequence utilizes variable density spiral acquisition gradients, which allow for the implementation of a self-navigation scheme by which both eddy current and motion artifacts are removed. The result is that high resolution 3D DTI images are produced without the need for eddy current compensating gradients or B0 field correction. In addition, a novel method for fast and accurate reconstruction of the non-Cartesian data is employed. Results are demonstrated in the brains of normal human volunteers. PMID:19778618

Improved Linear Algebra Methods for Redshift Computation from Limited Spectrum Data - II

NASA Technical Reports Server (NTRS)

Foster, Leslie; Waagen, Alex; Aijaz, Nabella; Hurley, Michael; Luis, Apolo; Rinsky, Joel; Satyavolu, Chandrika; Gazis, Paul; Srivastava, Ashok; Way, Michael

2008-01-01

Given photometric broadband measurements of a galaxy, Gaussian processes may be used with a training set to solve the regression problem of approximating the redshift of this galaxy. However, in practice solving the traditional Gaussian processes equation is too slow and requires too much memory. We employed several methods to avoid this difficulty using algebraic manipulation and low-rank approximation, and were able to quickly approximate the redshifts in our testing data within 17 percent of the known true values using limited computational resources. The accuracy of one method, the V Formulation, is comparable to the accuracy of the best methods currently used for this problem.

A flux monitoring method for easy and accurate flow rate measurement in pressure-driven flows.

PubMed

Siria, Alessandro; Biance, Anne-Laure; Ybert, Christophe; Bocquet, Lydéric

2012-03-07

We propose a low-cost and versatile method to measure flow rate in microfluidic channels under pressure-driven flows, thereby providing a simple characterization of the hydrodynamic permeability of the system. The technique is inspired by the current monitoring method usually employed to characterize electro-osmotic flows, and makes use of the measurement of the time-dependent electric resistance inside the channel associated with a moving salt front. We have successfully tested the method in a micrometer-size channel, as well as in a complex microfluidic channel with a varying cross-section, demonstrating its ability in detecting internal shape variations.

[Current macro-diagnostic trends of forensic medicine in the Czech Republic].

PubMed

Frišhons, Jan; Kučerová, Štěpánka; Jurda, Mikoláš; Sokol, Miloš; Vojtíšek, Tomáš; Hejna, Petr

2017-01-01

Over the last few years, advanced diagnostic methods have penetrated in the realm of forensic medicine in addition to standard autopsy techniques supported by traditional X-ray examination and macro-diagnostic laboratory tests. Despite the progress of imaging methods, the conventional autopsy has remained basic and essential diagnostic tool in forensic medicine. Postmortem computed tomography and magnetic resonance imaging are far the most progressive modern radio diagnostic methods setting the current trend of virtual autopsies all over the world. Up to now, only two institutes of forensic medicine have available postmortem computed tomography for routine diagnostic purposes in the Czech Republic. Postmortem magnetic resonance is currently unattainable for routine diagnostic use and was employed only for experimental purposes. Photogrammetry is digital method focused primarily on body surface imaging. Recently, the most fruitful results have been yielded from the interdisciplinary cooperation between forensic medicine and forensic anthropology with the implementation of body scanning techniques and 3D printing. Non-invasive and mini-invasive investigative methods such as postmortem sonography and postmortem endoscopy was unsystematically tested for diagnostic performance with good outcomes despite of limitations of these methods in postmortem application. Other futuristic methods, such as the use of a drone to inspect the crime scene are still experimental tools. The authors of the article present a basic overview of the both routinely and experimentally used investigative methods and current macro-diagnostic trends of the forensic medicine in the Czech Republic.

Optical vs. electronic enhancement of remote sensing imagery

NASA Technical Reports Server (NTRS)

Colwell, R. N.; Katibah, E. F.

1976-01-01

Basic aspects of remote sensing are considered and a description is provided of the methods which are employed in connection with the optical or electronic enhancement of remote sensing imagery. The advantages and limitations of various image enhancement methods and techniques are evaluated. It is pointed out that optical enhancement methods and techniques are currently superior to electronic ones with respect to spatial resolution and equipment cost considerations. Advantages of electronic procedures, on the other hand, are related to a greater flexibility regarding the presentation of the information as an aid for the interpretation by the image analyst.

Dynamic Analysis Method for Electromagnetic Artificial Muscle Actuator under PID Control

NASA Astrophysics Data System (ADS)

Nakata, Yoshihiro; Ishiguro, Hiroshi; Hirata, Katsuhiro

We have been studying an interior permanent magnet linear actuator for an artificial muscle. This actuator mainly consists of a mover and stator. The mover is composed of permanent magnets, magnetic cores and a non-magnetic shaft. The stator is composed of 3-phase coils and a back yoke. In this paper, the dynamic analysis method under PID control is proposed employing the 3-D finite element method (3-D FEM) to compute the dynamic response and current response when the positioning control is active. As a conclusion, computed results show good agreement with measured ones of a prototype.

Applications of exact traveling wave solutions of Modified Liouville and the Symmetric Regularized Long Wave equations via two new techniques

NASA Astrophysics Data System (ADS)

Lu, Dianchen; Seadawy, Aly R.; Ali, Asghar

2018-06-01

In this current work, we employ novel methods to find the exact travelling wave solutions of Modified Liouville equation and the Symmetric Regularized Long Wave equation, which are called extended simple equation and exp(-Ψ(ξ))-expansion methods. By assigning the different values to the parameters, different types of the solitary wave solutions are derived from the exact traveling wave solutions, which shows the efficiency and precision of our methods. Some solutions have been represented by graphical. The obtained results have several applications in physical science.

Education and employment outcomes of young adults with a history of developmental language disorder

PubMed Central

Durkin, Kevin; Toseeb, Umar; Botting, Nicola; Pickles, Andrew

2017-01-01

Abstract Background Developmental language disorder (DLD) presents a considerable barrier for young adults to engage in further education and training. Early studies with young adults with DLD revealed poor educational achievement and lack of opportunities to progress in education. More recent studies have provided more positive findings. Relatively sparse data exist, however, on current cohorts and the factors that predict outcomes. Aims To examine educational and employment outcomes in young adulthood in a sample of people with histories of DLD compared with an age‐matched peer group without DLD. We ask: How do educational pathways and early jobs compare between those with and without DLD? Are young adults with DLD receiving similar levels of income as their peers? To what extent are language and literacy abilities associated with outcomes? Methods & Procedures Participants included 84 individuals with DLD (67% males) and 88 age‐matched peers without DLD (56% males). Participants were on average 24 years of age. They completed a battery of psycholinguistic, literacy and nonverbal skills assessments. Data were also collected on educational qualifications, current educational status, extent of educational support received, employment status, history and support, as well as current income. Outcomes & Results Those with DLD obtained lower academic and vocational qualifications. Higher educational/vocational qualifications were associated with better language, better reading and higher performance IQ (PIQ). There were few differences between the two groups in terms of engagement with education, but the mean age at leaving education was significantly earlier in the participants with DLD. Substantially more participants with DLD reported receiving support or dispensation from their educational institution. There was no significant difference between groups in the proportion of young people currently employed, though a higher proportion of the age‐matched peers was in work full time. Participants with DLD were much more likely to be in non‐professional occupations. However, when examining pay in relation to types of occupation, the groups’ incomes were broadly comparable. Conclusions & Implications At the group level, young people with a history of DLD more commonly have less skilled employment and more rarely achieve professional roles. At the individual level there is considerable variation with smaller but not trivial proportions of young adults with a history of DLD showing good educational and employment outcomes. There are positive aspects to early adult outcomes for some young people with a history of DLD. PMID:29139196

Three-dimensional Numerical Analysis on Blade Response of Vertical Axis Tidal Current Turbine Under Operational Condition

DOE Office of Scientific and Technical Information (OSTI.GOV)

Li, Ye; Karri, Naveen K.; Wang, Qi

Tidal power as a large-scale renewable source of energy has been receiving significant attention recently because of its advantages over the wind and other renewal energy sources. The technology used to harvest energy from tidal current is called a tidal current turbine. Though some of the principles of wind turbine design are applicable to tidal current turbines, the design of latter ones need additional considerations like cavitation damage, corrosion etc. for the long-term reliability of such turbines. Depending up on the orientation of axis, tidal current turbines can be classified as vertical axis turbines or horizontal axis turbines. Existing studiesmore » on the vertical axis tidal current turbine focus more on the hydrodynamic aspects of the turbine rather than the structural aspects. This paper summarizes our recent efforts to study the integrated hydrodynamic and structural aspects of the vertical axis tidal current turbines. After reviewing existing methods in modeling tidal current turbines, we developed a hybrid approach that combines discrete vortex method -finite element method that can simulate the integrated hydrodynamic and structural response of a vertical axis turbine. This hybrid method was initially employed to analyze a typical three-blade vertical axis turbine. The power coefficient was used to evaluate the hydrodynamic performance, and critical deflection was considered to evaluate the structural reliability. A sensitivity analysis was also conducted with various turbine height-to-radius ratios. The results indicate that both the power output and failure probability increase with the turbine height, suggesting a necessity for optimal design. An attempt to optimize a 3-blade vertical axis turbine design with hybrid method yielded a ratio of turbine height to radius (H/R) about 3.0 for reliable maximum power output.« less

Functionally graded polymeric materials: A brif review of current fabrication methods and introduction of a novel fabrication method.

PubMed

Almasi, Davood; Sadeghi, Maliheh; Lau, Woei Jye; Roozbahani, Fatemeh; Iqbal, Nida

2016-07-01

The present work reviews the current fabrication methods of the functionally graded polymeric material (FGPM) and introduces a novel fabrication method that is versatile in applications as compared to those of existing used methods. For the first time electrophoresis was used to control the distribution of the tetracycline hydrochloride (TC) in a film made of polylactic acid (PLA), aiming to induce antimicrobial effect on the film prepared. The elemental analysis on the film surface showed that by employing electrophoresis force, higher amount of TC was detected near the top surface of the film. Results also showed that the FGPM samples with higher percentage of the TC on the film surface were highly effective to minimize the growth of Escherichia coli. These findings are useful and important to improve dispersion quality of the particles in the composite material and further enhance its antibacterial property. Copyright © 2016 Elsevier B.V. All rights reserved.

Current employment status, occupational category, occupational hazard exposure, and job stress in relation to telomere length: The Multiethnic Study of Atherosclerosis (MESA)

PubMed Central

Fujishiro, Kaori; Diez-Roux, Ana V; Landsbergis, Paul; Jenny, Nancy Swords; Seeman, Teresa

2014-01-01

Objective Telomere length has been proposed as a biomarker of cell senescence, which is associated with a wide array of adverse health outcomes. While work is a major determinant of health, few studies have investigated the association of telomere length with various dimensions of occupation. Accelerated cellular aging could be a common pathway linking occupational exposure to several health outcomes. Methods Leukocyte telomere length was assessed using quantitative polymerase chain reaction (Q-PCR) in a community-based sample of 981 individuals (age: 45–84 years old). Questionnaires were used to collect information on current employment status, current or main occupation before retirement, and job strain. The O*NET (Occupational Resource Network) database was linked to the questionnaire data to create 5 exposure measures: physical activity on the job, physical hazard exposure, interpersonal stressors, job control, and job demands. Linear regression was used to estimate associations of occupational characteristics with telomere lengths after adjustment for age, sex, race, socioeconomic position, and several behavioral risk factors. Results There were no mean differences in telomere lengths across current employment status, occupational category, job strain categories or levels of most O*NET exposure measures. There was also no evidence that being in lower status occupational categories or being exposed to higher levels of adverse physical or psychosocial exposures accelerated the association between age and telomere shortening. Conclusions Cellular aging as reflected by shorter telomeres does not appear to be an important pathway linking occupation to various health outcomes. PMID:23686115

Stirling Analysis Comparison of Commercial vs. High-Order Methods

NASA Technical Reports Server (NTRS)

Dyson, Rodger W.; Wilson, Scott D.; Tew, Roy C.; Demko, Rikako

2007-01-01

Recently, three-dimensional Stirling engine simulations have been accomplished utilizing commercial Computational Fluid Dynamics software. The validations reported can be somewhat inconclusive due to the lack of precise time accurate experimental results from engines, export control/ proprietary concerns, and the lack of variation in the methods utilized. The last issue may be addressed by solving the same flow problem with alternate methods. In this work, a comprehensive examination of the methods utilized in the commercial codes is compared with more recently developed high-order methods. Specifically, Lele's Compact scheme and Dyson s Ultra Hi-Fi method will be compared with the SIMPLE and PISO methods currently employed in CFD-ACE, FLUENT, CFX, and STAR-CD (all commercial codes which can in theory solve a three-dimensional Stirling model although sliding interfaces and their moving grids limit the effective time accuracy). We will initially look at one-dimensional flows since the current standard practice is to design and optimize Stirling engines with empirically corrected friction and heat transfer coefficients in an overall one-dimensional model. This comparison provides an idea of the range in which commercial CFD software for modeling Stirling engines may be expected to provide accurate results. In addition, this work provides a framework for improving current one-dimensional analysis codes.

Stirling Analysis Comparison of Commercial Versus High-Order Methods

NASA Technical Reports Server (NTRS)

Dyson, Rodger W.; Wilson, Scott D.; Tew, Roy C.; Demko, Rikako

2005-01-01

Recently, three-dimensional Stirling engine simulations have been accomplished utilizing commercial Computational Fluid Dynamics software. The validations reported can be somewhat inconclusive due to the lack of precise time accurate experimental results from engines, export control/proprietary concerns, and the lack of variation in the methods utilized. The last issue may be addressed by solving the same flow problem with alternate methods. In this work, a comprehensive examination of the methods utilized in the commercial codes is compared with more recently developed high-order methods. Specifically, Lele's compact scheme and Dyson's Ultra Hi-Fi method will be compared with the SIMPLE and PISO methods currently employed in CFD-ACE, FLUENT, CFX, and STAR-CD (all commercial codes which can in theory solve a three-dimensional Stirling model with sliding interfaces and their moving grids limit the effective time accuracy). We will initially look at one-dimensional flows since the current standard practice is to design and optimize Stirling engines with empirically corrected friction and heat transfer coefficients in an overall one-dimensional model. This comparison provides an idea of the range in which commercial CFD software for modeling Stirling engines may be expected to provide accurate results. In addition, this work provides a framework for improving current one-dimensional analysis codes.

Gauge invariance of excitonic linear and nonlinear optical response

NASA Astrophysics Data System (ADS)

Taghizadeh, Alireza; Pedersen, T. G.

2018-05-01

We study the equivalence of four different approaches to calculate the excitonic linear and nonlinear optical response of multiband semiconductors. These four methods derive from two choices of gauge, i.e., length and velocity gauges, and two ways of computing the current density, i.e., direct evaluation and evaluation via the time-derivative of the polarization density. The linear and quadratic response functions are obtained for all methods by employing a perturbative density-matrix approach within the mean-field approximation. The equivalence of all four methods is shown rigorously, when a correct interaction Hamiltonian is employed for the velocity gauge approaches. The correct interaction is written as a series of commutators containing the unperturbed Hamiltonian and position operators, which becomes equivalent to the conventional velocity gauge interaction in the limit of infinite Coulomb screening and infinitely many bands. As a case study, the theory is applied to hexagonal boron nitride monolayers, and the linear and nonlinear optical response found in different approaches are compared.

Human Age Estimation Method Robust to Camera Sensor and/or Face Movement

PubMed Central

Nguyen, Dat Tien; Cho, So Ra; Pham, Tuyen Danh; Park, Kang Ryoung

2015-01-01

Human age can be employed in many useful real-life applications, such as customer service systems, automatic vending machines, entertainment, etc. In order to obtain age information, image-based age estimation systems have been developed using information from the human face. However, limitations exist for current age estimation systems because of the various factors of camera motion and optical blurring, facial expressions, gender, etc. Motion blurring can usually be presented on face images by the movement of the camera sensor and/or the movement of the face during image acquisition. Therefore, the facial feature in captured images can be transformed according to the amount of motion, which causes performance degradation of age estimation systems. In this paper, the problem caused by motion blurring is addressed and its solution is proposed in order to make age estimation systems robust to the effects of motion blurring. Experiment results show that our method is more efficient for enhancing age estimation performance compared with systems that do not employ our method. PMID:26334282

The ethical tightrope: politics of intimacy and consensual method in sexuality research.

PubMed

Zago, Luiz F; Holmes, Dave

2015-06-01

This paper seeks to analyze the construction of ethics in sexuality research in which qualitative methods are employed in the field of social sciences. Analyses are based on a bibliographic review of current discussions on research methods of queer theory and on the authors' own experiences of past research on sexuality. The article offers a theoretical perspective on the ways ethnography and in-depth interviews become methods that can rely on a consensual method and create a politics of intimacy between the researchers and research participants. The politics of intimacy may contribute to the production of a politically engaged knowledge while escaping from the moral matrix that usually governs the relationship between researchers and research participants. It is argued here that the researcher's sexed and gendered body matters for fieldwork; that the consensual method among participants may be employed in sexuality research as a fruitful tool; and that the relationships created among researchers and participants can pose a challenge to predetermined ethical guidelines in research. As a result, discussions problematize the existence of a politics of intimacy in sexuality research that is characterized by ethical relations among research participants. © 2014 John Wiley & Sons Ltd.

Modernizing Selection and Promotion Procedures in the State Employment Security Service Agency.

ERIC Educational Resources Information Center

Derryck, Dennis A.; Leyes, Richard

The purpose of this feasibility study was to discover the types ofselection and promotion models, strategies, and processes that must be employed if current State Employment Security Service Agency selection practices are to be made more directly relevant to the various populations currently being served. Specifically, the study sought to…

Family employment and child socioemotional behaviour: longitudinal findings from the UK Millennium Cohort Study

PubMed Central

Hope, Steven; Pearce, Anna; Whitehead, Margaret; Law, Catherine

2014-01-01

Background Levels of paid employment in two parent and lone parent families have increased in the UK but evidence of its impact on child socioemotional behaviour is limited and inconsistent. Methods We conducted a longitudinal analysis using the first four sweeps of the Millennium Cohort Study (9 months, 3 years, 5 years and 7 years) to investigate the influence of family employment trajectories in the early years on socioemotional behaviour at 7 years, unadjusted and adjusted for covariates. In addition, mothers’ employment was investigated separately. Results Children from families where no parent was employed for one or more sweeps were at a greater risk of socioemotional problem behaviour compared with those where a parent was continuously employed, even after adjustment for covariates. Children of mothers who were non-employed for one or more sweeps were at greater risk of problem behaviour compared with mothers who were employed at all sweeps. Adjustment for covariates fully attenuated the excess risk for children whose mothers had moved into employment by the time they were 7 years. In contrast, the elevated risk associated with continuous non-employment and a single transition out of employment was attenuated after adjustment for early covariates, fathers’ employment, household income and mothers’ psychological distress at 7 years, but remained significant. Conclusions Family and mothers’ employment were associated with a lower risk of problem behaviour for children in middle childhood, in part explained by sociodemographic characteristics of families and the apparent psychological and socioeconomic benefits of employment. Results for mothers’ transitions in or out of the labour market suggest that child problem behaviour is influenced by current status, over and above diverse earlier experiences of employment and non-employment. PMID:24889054

Enlistment Decisions of Young Men.

DTIC Science & Technology

1985-07-01

14Employment status is not the usual one of employed, unemployed , or out of the labor force but instead indicates currently employed, not currently employed...worker with high firm- specific human capital, so he is less likely to be unemployed during a downturn at the firm. Job matching theory (Mincer and...returns) as well as the value one attaches to greater under- standing or appreciation of the world ( psychic returns). The monetary increment will tend to

Synergistic Combination of Electrolysis and Electroporation for Tissue Ablation.

PubMed

Stehling, Michael K; Guenther, Enric; Mikus, Paul; Klein, Nina; Rubinsky, Liel; Rubinsky, Boris

2016-01-01

Electrolysis, electrochemotherapy with reversible electroporation, nanosecond pulsed electric fields and irreversible electroporation are valuable non-thermal electricity based tissue ablation technologies. This paper reports results from the first large animal study of a new non-thermal tissue ablation technology that employs "Synergistic electrolysis and electroporation" (SEE). The goal of this pre-clinical study is to expand on earlier studies with small animals and use the pig liver to establish SEE treatment parameters of clinical utility. We examined two SEE methods. One of the methods employs multiple electrochemotherapy-type reversible electroporation magnitude pulses, designed in such a way that the charge delivered during the electroporation pulses generates the electrolytic products. The second SEE method combines the delivery of a small number of electrochemotherapy magnitude electroporation pulses with a low voltage electrolysis generating DC current in three different ways. We show that both methods can produce lesion with dimensions of clinical utility, without the need to inject drugs as in electrochemotherapy, faster than with conventional electrolysis and with lower electric fields than irreversible electroporation and nanosecond pulsed ablation.

Synergistic Combination of Electrolysis and Electroporation for Tissue Ablation

PubMed Central

Mikus, Paul; Klein, Nina; Rubinsky, Liel; Rubinsky, Boris

2016-01-01

Electrolysis, electrochemotherapy with reversible electroporation, nanosecond pulsed electric fields and irreversible electroporation are valuable non-thermal electricity based tissue ablation technologies. This paper reports results from the first large animal study of a new non-thermal tissue ablation technology that employs “Synergistic electrolysis and electroporation” (SEE). The goal of this pre-clinical study is to expand on earlier studies with small animals and use the pig liver to establish SEE treatment parameters of clinical utility. We examined two SEE methods. One of the methods employs multiple electrochemotherapy-type reversible electroporation magnitude pulses, designed in such a way that the charge delivered during the electroporation pulses generates the electrolytic products. The second SEE method combines the delivery of a small number of electrochemotherapy magnitude electroporation pulses with a low voltage electrolysis generating DC current in three different ways. We show that both methods can produce lesion with dimensions of clinical utility, without the need to inject drugs as in electrochemotherapy, faster than with conventional electrolysis and with lower electric fields than irreversible electroporation and nanosecond pulsed ablation. PMID:26866693

A Probabilistic Collocation Based Iterative Kalman Filter for Landfill Data Assimilation

NASA Astrophysics Data System (ADS)

Qiang, Z.; Zeng, L.; Wu, L.

2016-12-01

Due to the strong spatial heterogeneity of landfill, uncertainty is ubiquitous in gas transport process in landfill. To accurately characterize the landfill properties, the ensemble Kalman filter (EnKF) has been employed to assimilate the measurements, e.g., the gas pressure. As a Monte Carlo (MC) based method, the EnKF usually requires a large ensemble size, which poses a high computational cost for large scale problems. In this work, we propose a probabilistic collocation based iterative Kalman filter (PCIKF) to estimate permeability in a liquid-gas coupling model. This method employs polynomial chaos expansion (PCE) to represent and propagate the uncertainties of model parameters and states, and an iterative form of Kalman filter to assimilate the current gas pressure data. To further reduce the computation cost, the functional ANOVA (analysis of variance) decomposition is conducted, and only the first order ANOVA components are remained for PCE. Illustrated with numerical case studies, this proposed method shows significant superiority in computation efficiency compared with the traditional MC based iterative EnKF. The developed method has promising potential in reliable prediction and management of landfill gas production.

Comparative policy analysis for alcohol and drugs: Current state of the field.

PubMed

Ritter, Alison; Livingston, Michael; Chalmers, Jenny; Berends, Lynda; Reuter, Peter

2016-05-01

A central policy research question concerns the extent to which specific policies produce certain effects - and cross-national (or between state/province) comparisons appear to be an ideal way to answer such a question. This paper explores the current state of comparative policy analysis (CPA) with respect to alcohol and drugs policies. We created a database of journal articles published between 2010 and 2014 as the body of CPA work for analysis. We used this database of 57 articles to clarify, extract and analyse the ways in which CPA has been defined. Quantitative and qualitative analysis of the CPA methods employed, the policy areas that have been studied, and differences between alcohol CPA and drug CPA are explored. There is a lack of clear definition as to what counts as a CPA. The two criteria for a CPA (explicit study of a policy, and comparison across two or more geographic locations), exclude descriptive epidemiology and single state comparisons. With the strict definition, most CPAs were with reference to alcohol (42%), although the most common policy to be analysed was medical cannabis (23%). The vast majority of papers undertook quantitative data analysis, with a variety of advanced statistical methods. We identified five approaches to the policy specification: classification or categorical coding of policy as present or absent; the use of an index; implied policy differences; described policy difference and data-driven policy coding. Each of these has limitations, but perhaps the most common limitation was the inability for the method to account for the differences between policy-as-stated versus policy-as-implemented. There is significant diversity in CPA methods for analysis of alcohol and drugs policy, and some substantial challenges with the currently employed methods. The absence of clear boundaries to a definition of what counts as a 'comparative policy analysis' may account for the methodological plurality but also appears to stand in the way of advancing the techniques. Copyright © 2016 Elsevier B.V. All rights reserved.

Effect of Alternating Current on the Cathodic Protection and Interface Structure of X80 Steel.

PubMed

Wang, Huiru; Du, Cuiwei; Liu, Zhiyong; Wang, Luntao; Ding, De

2017-07-25

This study employs potential-monitoring techniques, cyclic voltammetry tests, alternating current (AC) voltammetry methods, and surface characterization to investigate the AC corrosion of cathodically protected X80 pipeline steel. In a non-passive neutral solution at pH 7.2, a sufficiently negative potential completely protects steel at an AC current density of 100 A/m². In an alkaline solution at pH 9.6, more serious AC corrosion occurs at more negative cathodic protection (CP) potential, whereas without CP the steel suffers negligible corrosion. In addition, the interface capacitance increases with AC amplitude. Based on these results, the AC corrosion mechanisms that function under various conditions are analyzed and described.

Numerical Simulation of Tethered Underwater Kites for Power Generation

NASA Astrophysics Data System (ADS)

Ghasemi, Amirmahdi; Olinger, David; Tryggvason, Gretar

2015-11-01

An emerging renewable energy technology, tethered undersea kites (TUSK), which is used to extract hydrokinetic energy from ocean and tidal currents, is studied. TUSK systems consist of a rigid-winged ``kite,'' or glider, moving in an ocean current which is connected by tethers to a floating buoy on the ocean surface. The TUSK kite is a current speed enhancement device since the kite can move in high-speed, cross-current motion at 4-6 times the current velocity, thus producing more power than conventional marine turbines. A computational simulation is developed to simulate the dynamic motion of an underwater kite and extendable tether. A two-step projection method within a finite volume formulation, along with an Open MP acceleration method, is employed to solve the Navier-Stokes equations. An immersed boundary method is incorporated to model the fluid-structure interaction of the rigid kite (with NACA 0012 airfoil shape in 2D and NACA 0021 airfoil shape in 3D simulations) and the fluid flow. PID control methods are used to adjust the kite angle of attack during power (tether reel-out) and retraction (reel-in) phases. Two baseline simulations (for kite motions in two and three dimensions) are studied, and system power output, flow field vorticity, tether tension, and hydrodynamic coefficients (lift and drag) for the kite are determined. The simulated power output shows good agreement with established theoretical results for a kite moving in two-dimensions.

Small acid soluble proteins for rapid spore identification.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Branda, Steven S.; Lane, Todd W.; VanderNoot, Victoria A.

2006-12-01

This one year LDRD addressed the problem of rapid characterization of bacterial spores such as those from the genus Bacillus, the group that contains pathogenic spores such as B. anthracis. In this effort we addressed the feasibility of using a proteomics based approach to spore characterization using a subset of conserved spore proteins known as the small acid soluble proteins or SASPs. We proposed developing techniques that built on our previous expertise in microseparations to rapidly characterize or identify spores. An alternative SASP extraction method was developed that was amenable to both the subsequent fluorescent labeling required for laser-induced fluorescencemore » detection and the low ionic strength requirements for isoelectric focusing. For the microseparations, both capillary isoelectric focusing and chip gel electrophoresis were employed. A variety of methods were evaluated to improve the molecular weight resolution for the SASPs, which are in a molecular weight range that is not well resolved by the current methods. Isoelectric focusing was optimized and employed to resolve the SASPs using UV absorbance detection. Proteomic signatures of native wild type Bacillus spores and clones genetically engineered to produce altered SASP patterns were assessed by slab gel electrophoresis, capillary isoelectric focusing with absorbance detection as well as microchip based gel electrophoresis employing sensitive laser-induced fluorescence detection.« less

Measuring the volume of brain tumour and determining its location in T2-weighted MRI images using hidden Markov random field: expectation maximization algorithm

NASA Astrophysics Data System (ADS)

Mat Jafri, Mohd. Zubir; Abdulbaqi, Hayder Saad; Mutter, Kussay N.; Mustapha, Iskandar Shahrim; Omar, Ahmad Fairuz

2017-06-01

A brain tumour is an abnormal growth of tissue in the brain. Most tumour volume measurement processes are carried out manually by the radiographer and radiologist without relying on any auto program. This manual method is a timeconsuming task and may give inaccurate results. Treatment, diagnosis, signs and symptoms of the brain tumours mainly depend on the tumour volume and its location. In this paper, an approach is proposed to improve volume measurement of brain tumors as well as using a new method to determine the brain tumour location. The current study presents a hybrid method that includes two methods. One method is hidden Markov random field - expectation maximization (HMRFEM), which employs a positive initial classification of the image. The other method employs the threshold, which enables the final segmentation. In this method, the tumour volume is calculated using voxel dimension measurements. The brain tumour location was determined accurately in T2- weighted MRI image using a new algorithm. According to the results, this process was proven to be more useful compared to the manual method. Thus, it provides the possibility of calculating the volume and determining location of a brain tumour.

A Review on Microdialysis Calibration Methods: the Theory and Current Related Efforts.

PubMed

Kho, Chun Min; Enche Ab Rahim, Siti Kartini; Ahmad, Zainal Arifin; Abdullah, Norazharuddin Shah

2017-07-01

Microdialysis is a sampling technique first introduced in the late 1950s. Although this technique was originally designed to study endogenous compounds in animal brain, it is later modified to be used in other organs. Additionally, microdialysis is not only able to collect unbound concentration of compounds from tissue sites; this technique can also be used to deliver exogenous compounds to a designated area. Due to its versatility, microdialysis technique is widely employed in a number of areas, including biomedical research. However, for most in vivo studies, the concentration of substance obtained directly from the microdialysis technique does not accurately describe the concentration of the substance on-site. In order to relate the results collected from microdialysis to the actual in vivo condition, a calibration method is required. To date, various microdialysis calibration methods have been reported, with each method being capable to provide valuable insights of the technique itself and its applications. This paper aims to provide a critical review on various calibration methods used in microdialysis applications, inclusive of a detailed description of the microdialysis technique itself to start with. It is expected that this article shall review in detail, the various calibration methods employed, present examples of work related to each calibration method including clinical efforts, plus the advantages and disadvantages of each of the methods.

Modulating light propagation in ZnO-Cu₂O-inverse opal solar cells for enhanced photocurrents.

PubMed

Yantara, Natalia; Pham, Thi Thu Trang; Boix, Pablo P; Mathews, Nripan

2015-09-07

The advantages of employing an interconnected periodic ZnO morphology, i.e. an inverse opal structure, in electrodeposited ZnO/Cu2O devices are presented. The solar cells are fabricated using low cost solution based methods such as spin coating and electrodeposition. The impact of inverse opal geometry, mainly the diameter and thickness, is scrutinized. By employing 3 layers of an inverse opal structure with a 300 nm pore diameter, higher short circuit photocurrents (∼84% improvement) are observed; however the open circuit voltages decrease with increasing interfacial area. Optical simulation using a finite difference time domain method shows that the inverse opal structure modulates light propagation within the devices such that more photons are absorbed close to the ZnO/Cu2O junction. This increases the collection probability resulting in improved short circuit currents.

Computational materials science and engineering education: A survey of trends and needs

NASA Astrophysics Data System (ADS)

Thornton, K.; Nola, Samanthule; Edwin Garcia, R.; Asta, Mark; Olson, G. B.

2009-10-01

Results from a recent reassessment of the state of computational materials science and engineering (CMSE) education are reported. Surveys were distributed to the chairs and heads of materials programs, faculty members engaged in computational research, and employers of materials scientists and engineers, mainly in the United States. The data was compiled to assess current course offerings related to CMSE, the general climate for introducing computational methods in MSE curricula, and the requirements from the employers’ viewpoint. Furthermore, the available educational resources and their utilization by the community are examined. The surveys show a general support for integrating computational content into MSE education. However, they also reflect remaining issues with implementation, as well as a gap between the tools being taught in courses and those that are used by employers. Overall, the results suggest the necessity for a comprehensively developed vision and plans to further the integration of computational methods into MSE curricula.

Application of cell and biomaterial-based tissue engineering methods in the treatment of cartilage, menisci and ligament injuries.

PubMed

Trzeciak, Tomasz; Richter, Magdalena; Suchorska, Wiktoria; Augustyniak, Ewelina; Lach, Michał; Kaczmarek, Małgorzata; Kaczmarczyk, Jacek

2016-03-01

Over 20 years ago it was realized that the traditional methods of the treatment of injuries to joint components: cartilage, menisci and ligaments, did not give satisfactory results and so there is a need of employing novel, more effective therapeutic techniques. Recent advances in molecular biology, biotechnology and polymer science have led to both the experimental and clinical application of various cell types, adapting their culture conditions in order to ensure a directed differentiation of the cells into a desired cell type, and employing non-toxic and non-immunogenic biomaterial in the treatment of knee joint injuries. In the present review the current state of knowledge regarding novel cell sources, in vitro conditions of cell culture and major important biomaterials, both natural and synthetic, used in cartilage, meniscus and ligament repair by tissue engineering techniques are described, and the assets and drawbacks of their clinical application are critically evaluated.

Employment characteristics and socioeconomic factors associated with disparities in smoking abstinence and former smoking among U.S. workers.

PubMed

Fagan, Pebbles; Shavers, Vickie L; Lawrence, Deirdre; Gibson, James Todd; O'Connell, Mary E

2007-11-01

This study examines the associations among employment and socioeconomic factors and the outcomes, current smoking, cigarette abstinence and former smoking among adult U.S. workers ages 18-64 (n=288,813). Multivariate logistic regression was used to examine the associations among the variables using cross-sectional data from the 1998-1999 and 2001-2002 Tobacco Use Supplements to the Current Population Survey. Lower odds of current smoking was observed among part-time workers compared to those working variable hours and multiple job holders compared to persons holding one job. The self-employed, part-time workers and multiple job holders had higher odds of former smoking than comparison groups. Employment factors were not associated with short-term abstinence or 12-month abstinence from smoking, but income, education, marital status, and duration of smoking were associated with 12-month abstinence. These data suggest that while employment factors are associated with current and former smoking, socioeconomic factors are associated with long-term quitting.

20 CFR 404.456 - Current suspension of benefits because an individual works or engages in self-employment.

Code of Federal Regulations, 2010 CFR

2010-04-01

... individual works or engages in self-employment. 404.456 Section 404.456 Employees' Benefits SOCIAL SECURITY... Nonpayments of Benefits § 404.456 Current suspension of benefits because an individual works or engages in self-employment. (a) Circumstances under which benefit payments may be suspended. If, on the basis of...

Experiences of Female Faculty with Maternity Leave at Four-Year Universities in an Upper Midwest State

ERIC Educational Resources Information Center

Myerchin, Audra Dawn

2012-01-01

The purpose of this mixed methods study was to explore female faculty members' experiences with maternity leave, while working as a career academic in higher education. Participants consisted of women currently employed in an upper Midwest state at six four-year institutions. An online survey was completed by 121 women, and 30 of these women also…

Scientific Inquiry Competency Perception Scale (The Case of Kazak Post-Graduate Students) Reliability and Validity Study

ERIC Educational Resources Information Center

Gelisli, Yücel; Beisenbayeva, Lyazzat

2017-01-01

The purpose of the current study is to develop a reliable scale to be used to determine the scientific inquiry competency perception of post-graduate students engaged in post-graduate studies in the field of educational sciences and teacher education in Kazakhstan. The study employed the descriptive method. Within the context of the study, a scale…

An Analysis of the Effect of a Cyber Home Learning System on Korean Secondary School Students' English Language Achievement and Attitude

ERIC Educational Resources Information Center

Shin, Ji Hye; Albers, Peggy

2015-01-01

This study examined the effectiveness of a Cyber Home Learning System (CHLS), an online learning system currently being employed in South Korea to improve the access and quality of public education as well as to reduce private tutoring expenditures. The quasi-experimental research design used experiment and survey methods to learn about the impact…

ANODIC TREATMENT OF URANIUM

DOEpatents

Kolodney, M.

1959-02-01

A method is presented for effecting eloctrolytic dissolution of a metallic uranium article at a uniform rate. The uranium is made the anode in an aqueous phosphoric acid solution containing nitrate ions furnished by either ammonium nitrate, lithium nitrate, sodium nitrate, or potassium nitrate. A stainless steel cathode is employed and electrolysls carried out at a current density of about 0.1 to 1 ampere per square inch.

Criteria for Selecting Types of Foreign-Language Laboratory Systems. ERIC Focus Reports on the Teaching of Foreign Languages, Number 20.

ERIC Educational Resources Information Center

Hutchinson, Joseph C.; Hutchinson, June O.

Focusing on the current status of the language laboratory in instructional use, this report stresses the need to employ a systems approach in the selection and operation of laboratory equipment. The author points out the interrelatedness of the key factors in any system, including: (1) people, (2) method, (3) instructional materials, (4)…

Mitigation of stress: new treatment alternatives.

PubMed

Subhani, Ahmad Rauf; Kamel, Nidal; Mohamad Saad, Mohamad Naufal; Nandagopal, Nanda; Kang, Kenneth; Malik, Aamir Saeed

2018-02-01

Complaints of stress are common in modern life. Psychological stress is a major cause of lifestyle-related issues, contributing to poor quality of life. Chronic stress impedes brain function, causing impairment of many executive functions, including working memory, decision making and attentional control. The current study sought to describe newly developed stress mitigation techniques, and their influence on autonomic and endocrine functions. The literature search revealed that the most frequently studied technique for stress mitigation was biofeedback (BFB). However, evidence suggests that neurofeedback (NFB) and noninvasive brain stimulation (NIBS) could potentially provide appropriate approaches. We found that recent studies of BFB methods have typically used measures of heart rate variability, respiration and skin conductance. In contrast, studies of NFB methods have typically utilized neurocomputation techniques employing electroencephalography, functional magnetic resonance imaging and near infrared spectroscopy. NIBS studies have typically utilized transcranial direct current stimulation methods. Mitigation of stress is a challenging but important research target for improving quality of life.

Intelligent control for PMSM based on online PSO considering parameters change

NASA Astrophysics Data System (ADS)

Song, Zhengqiang; Yang, Huiling

2018-03-01

A novel online particle swarm optimization method is proposed to design speed and current controllers of vector controlled interior permanent magnet synchronous motor drives considering stator resistance variation. In the proposed drive system, the space vector modulation technique is employed to generate the switching signals for a two-level voltage-source inverter. The nonlinearity of the inverter is also taken into account due to the dead-time, threshold and voltage drop of the switching devices in order to simulate the system in the practical condition. Speed and PI current controller gains are optimized with PSO online, and the fitness function is changed according to the system dynamic and steady states. The proposed optimization algorithm is compared with conventional PI control method in the condition of step speed change and stator resistance variation, showing that the proposed online optimization method has better robustness and dynamic characteristics compared with conventional PI controller design.

Investigation of conductive thermal control coatings by a contactless method in vacuo

NASA Technical Reports Server (NTRS)

Viehmann, W.; Shai, C. M.; Sanford, E. L.

1977-01-01

A technique for determining the conductance per unit area of thermal control coatings for electrostatically clean spacecraft is described. In order to simulate orbital conditions more closely, current-density-voltage (j-V) curves are obtained by a contactless method in which the paint on an aluminum substrate is the anode of a vacuum diode configuration with a tungsten filament cathode. Conductances per unit area which satisfy the International Sun Earth Explorer (ISEE) requirement were observed on black paints containing carbon and in white and green paints filled with zinc oxide which were fired in order to induce defect conductivity. Because of surface effects and the nonhomogeneous nature of paints, large discrepancies were found between measurements with the contactless method and measurements employing metallic contacts, particularly at low current densities. Therefore, measurements with metallic contacts are considered to be of questionable value in deciding the suitability of coatings for electrostatic charge control.

System and method employing a minimum distance and a load feature database to identify electric load types of different electric loads

DOEpatents

Lu, Bin; Yang, Yi; Sharma, Santosh K; Zambare, Prachi; Madane, Mayura A

2014-12-23

A method identifies electric load types of a plurality of different electric loads. The method includes providing a load feature database of a plurality of different electric load types, each of the different electric load types including a first load feature vector having at least four different load features; sensing a voltage signal and a current signal for each of the different electric loads; determining a second load feature vector comprising at least four different load features from the sensed voltage signal and the sensed current signal for a corresponding one of the different electric loads; and identifying by a processor one of the different electric load types by determining a minimum distance of the second load feature vector to the first load feature vector of the different electric load types of the load feature database.

Experimental investigations of an AC pulse heating method for vehicular high power lithium-ion batteries at subzero temperatures

NASA Astrophysics Data System (ADS)

Zhu, Jiangong; Sun, Zechang; Wei, Xuezhe; Dai, Haifeng; Gu, Weijun

2017-11-01

Effect of the AC (alternating current) pulse heating method on battery SoH (state of health) for large laminated power lithium-ion batteries at low temperature is investigated experimentally. Firstly, excitation current frequencies, amplitudes, and voltage limitations on cell temperature evolution are studied. High current amplitudes facilitate the heat accumulation and temperature rise. Low frequency region serves as a good innovation to heat the battery because of the large impedance. Wide voltage limitations also enjoy better temperature evolution owing to the less current modulation, but the temperature difference originated from various voltage limitations attenuates due to the decrement of impedance resulting from the temperature rise. Experiments with the thermocouple-embedded cell manifest good temperature homogeneity between the battery surface and interior during the AC heating process. Secondly, the cell capacity, Direct Current resistance and Electrochemical Impedance Spectroscopy are all calibrated to assess the battery SoH after the hundreds of AC pulse heating cycles. Also, all cells are disassembled to investigate the battery internal morphology with the employment of Scanning Electron Microscope and Energy-Dispersive x-ray Spectroscopy techniques. The results indicate that the AC heating method does not aggravate the cell degradation even in the low frequency range (0.5 Hz) under the normal voltage protection limitation.

Field Balancing of Magnetically Levitated Rotors without Trial Weights

PubMed Central

Fang, Jiancheng; Wang, Yingguang; Han, Bangcheng; Zheng, Shiqiang

2013-01-01

Unbalance in magnetically levitated rotor (MLR) can cause undesirable synchronous vibrations and lead to the saturation of the magnetic actuator. Dynamic balancing is an important way to solve these problems. However, the traditional balancing methods, using rotor displacement to estimate a rotor's unbalance, requiring several trial-runs, are neither precise nor efficient. This paper presents a new balancing method for an MLR without trial weights. In this method, the rotor is forced to rotate around its geometric axis. The coil currents of magnetic bearing, rather than rotor displacement, are employed to calculate the correction masses. This method provides two benefits when the MLR's rotation axis coincides with the geometric axis: one is that unbalanced centrifugal force/torque equals the synchronous magnetic force/torque, and the other is that the magnetic force is proportional to the control current. These make calculation of the correction masses by measuring coil current with only a single start-up precise. An unbalance compensation control (UCC) method, using a general band-pass filter (GPF) to make the MLR spin around its geometric axis is also discussed. Experimental results show that the novel balancing method can remove more than 92.7% of the rotor unbalance and a balancing accuracy of 0.024 g mm kg−1 is achieved.

Fast Fourier transform-based solution of 2D and 3D magnetization problems in type-II superconductivity

NASA Astrophysics Data System (ADS)

Prigozhin, Leonid; Sokolovsky, Vladimir

2018-05-01

We consider the fast Fourier transform (FFT) based numerical method for thin film magnetization problems (Vestgården and Johansen 2012 Supercond. Sci. Technol. 25 104001), compare it with the finite element methods, and evaluate its accuracy. Proposed modifications of this method implementation ensure stable convergence of iterations and enhance its efficiency. A new method, also based on the FFT, is developed for 3D bulk magnetization problems. This method is based on a magnetic field formulation, different from the popular h-formulation of eddy current problems typically employed with the edge finite elements. The method is simple, easy to implement, and can be used with a general current–voltage relation; its efficiency is illustrated by numerical simulations.

Optimization of diffusion-weighted single-refocused spin-echo EPI by reducing eddy-current artifacts and shortening the echo time.

PubMed

Shrestha, Manoj; Hok, Pavel; Nöth, Ulrike; Lienerth, Bianca; Deichmann, Ralf

2018-03-30

The purpose of this work was to optimize the acquisition of diffusion-weighted (DW) single-refocused spin-echo (srSE) data without intrinsic eddy-current compensation (ECC) for an improved performance of ECC postprocessing. The rationale is that srSE sequences without ECC may yield shorter echo times (TE) and thus higher signal-to-noise ratios (SNR) than srSE or twice-refocused spin-echo (trSE) schemes with intrinsic ECC. The proposed method employs dummy scans with DW gradients to drive eddy currents into a steady state before data acquisition. Parameters of the ECC postprocessing algorithm were also optimized. Simulations were performed to obtain minimum TE values for the proposed sequence and sequences with intrinsic ECC. Experimentally, the proposed method was compared with standard DW-trSE imaging, both in vitro and in vivo. Simulations showed substantially shorter TE for the proposed method than for methods with intrinsic ECC when using shortened echo readouts. Data of the proposed method showed a marked increase in SNR. A dummy scan duration of at least 1.5 s improved performance of the ECC postprocessing algorithm. Changes proposed for the DW-srSE sequence and for the parameter setting of the postprocessing ECC algorithm considerably reduced eddy-current artifacts and provided a higher SNR.

Constrained Burn Optimization for the International Space Station

NASA Technical Reports Server (NTRS)

Brown, Aaron J.; Jones, Brandon A.

2017-01-01

In long-term trajectory planning for the International Space Station (ISS), translational burns are currently targeted sequentially to meet the immediate trajectory constraints, rather than simultaneously to meet all constraints, do not employ gradient-based search techniques, and are not optimized for a minimum total deltav (v) solution. An analytic formulation of the constraint gradients is developed and used in an optimization solver to overcome these obstacles. Two trajectory examples are explored, highlighting the advantage of the proposed method over the current approach, as well as the potential v and propellant savings in the event of propellant shortages.

Methods for using argon-39 to age-date groundwater using ultra-low-background proportional counting

DOE PAGES

Mace, Emily; Aalseth, Craig; Brandenberger, Jill; ...

2016-12-21

Argon-39 can be used as a tracer for age-dating glaciers, oceans, and more recently, groundwater. With a half-life of 269 years, 39Ar fills an intermediate age range gap (50–1,000 years) not currently covered by other common groundwater tracers. Therefore, adding this tracer to the data suite for groundwater studies provides an important tool for improving our understanding of groundwater systems. Lastly, we present the methods employed for arriving at an age-date for a given sample of argon degassed from groundwater.

Producing a Brighter Future by Changing a Trend

NASA Astrophysics Data System (ADS)

Gwinn, Elaine

2006-12-01

As production of physics teachers declines across the nation, efforts are being employed at Ball Statue University to change that trend. BSU has been a PhysTEC coalition member since the Fall of 2001 and continues to be a Principal Project Institution for the project. This presentation will show various methods that have shown success toward the goal of the recruitment of more and better prepared science teachers. This will be an overview of the entire project, showing the current methods being utilized as well as the successful techniques used in the past.

Methods for using argon-39 to age-date groundwater using ultra-low-background proportional counting

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mace, Emily; Aalseth, Craig; Brandenberger, Jill

Argon-39 can be used as a tracer for age-dating glaciers, oceans, and more recently, groundwater. With a half-life of 269 years, 39Ar fills an intermediate age range gap (50-1,000 years) not currently covered by other common groundwater tracers. Therefore, adding this tracer to the data suite for groundwater studies provides an important tool for improving our understanding of groundwater systems. We present the methods employed for arriving at an age-date for a given sample of argon degassed from groundwater.

Methods for using argon-39 to age-date groundwater using ultra-low-background proportional counting

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mace, Emily; Aalseth, Craig; Brandenberger, Jill

Argon-39 can be used as a tracer for age-dating glaciers, oceans, and more recently, groundwater. With a half-life of 269 years, 39Ar fills an intermediate age range gap (50–1,000 years) not currently covered by other common groundwater tracers. Therefore, adding this tracer to the data suite for groundwater studies provides an important tool for improving our understanding of groundwater systems. Lastly, we present the methods employed for arriving at an age-date for a given sample of argon degassed from groundwater.

Dosimetry of typical transcranial magnetic stimulation devices

NASA Astrophysics Data System (ADS)

Lu, Mai; Ueno, Shoogo

2010-05-01

The therapeutic staff using transcranial magnetic stimulation (TMS) devices could be exposed to magnetic pulses. In this paper, dependence of induced currents in real human man model on different coil shapes, distance between the coil and man model as well as the rotation of the coil in space have been investigated by employing impedance method. It was found that the figure-of-eight coil has less leakage magnetic field and low current density induced in the body compared with the round coil. The TMS power supply cables play an important role in the induced current density in human body. The induced current density in TMS operator decreased as the coil rotates from parallel position to perpendicular position. Our present study shows that TMS operator should stand at least 110 cm apart from the coil.

Current-induced alternating reversed dual-echo-steady-state for joint estimation of tissue relaxation and electrical properties.

PubMed

Lee, Hyunyeol; Sohn, Chul-Ho; Park, Jaeseok

2017-07-01

To develop a current-induced, alternating reversed dual-echo-steady-state-based magnetic resonance electrical impedance tomography for joint estimation of tissue relaxation and electrical properties. The proposed method reverses the readout gradient configuration of conventional, in which steady-state-free-precession (SSFP)-ECHO is produced earlier than SSFP-free-induction-decay (FID) while alternating current pulses are applied in between the two SSFPs to secure high sensitivity of SSFP-FID to injection current. Additionally, alternating reversed dual-echo-steady-state signals are modulated by employing variable flip angles over two orthogonal injections of current pulses. Ratiometric signal models are analytically constructed, from which T 1 , T 2 , and current-induced B z are jointly estimated by solving a nonlinear inverse problem for conductivity reconstruction. Numerical simulations and experimental studies are performed to investigate the feasibility of the proposed method in estimating relaxation parameters and conductivity. The proposed method, if compared with conventional magnetic resonance electrical impedance tomography, enables rapid data acquisition and simultaneous estimation of T 1 , T 2 , and current-induced B z , yielding a comparable level of signal-to-noise ratio in the parameter estimates while retaining a relative conductivity contrast. We successfully demonstrated the feasibility of the proposed method in jointly estimating tissue relaxation parameters as well as conductivity distributions. It can be a promising, rapid imaging strategy for quantitative conductivity estimation. Magn Reson Med 78:107-120, 2017. © 2016 International Society for Magnetic Resonance in Medicine. © 2016 International Society for Magnetic Resonance in Medicine.

Winter bird population studies and project prairie birds for surveying grassland birds

USGS Publications Warehouse

Twedt, D.J.; Hamel, P.B.; Woodrey, M.S.

2008-01-01

We compared 2 survey methods for assessing winter bird communities in temperate grasslands: Winter Bird Population Study surveys are area-searches that have long been used in a variety of habitats whereas Project Prairie Bird surveys employ active-flushing techniques on strip-transects and are intended for use in grasslands. We used both methods to survey birds on 14 herbaceous reforested sites and 9 coastal pine savannas during winter and compared resultant estimates of species richness and relative abundance. These techniques did not yield similar estimates of avian populations. We found Winter Bird Population Studies consistently produced higher estimates of species richness, whereas Project Prairie Birds produced higher estimates of avian abundance for some species. When it is important to identify all species within the winter bird community, Winter Bird Population Studies should be the survey method of choice. If estimates of the abundance of relatively secretive grassland bird species are desired, the use of Project Prairie Birds protocols is warranted. However, we suggest that both survey techniques, as currently employed, are deficient and recommend distance- based survey methods that provide species-specific estimates of detection probabilities be incorporated into these survey methods.

A maximal chromatic expansion method of mapping multichannel imagery into color space. [North Dakota

NASA Technical Reports Server (NTRS)

Juday, R. D.; Abotteen, R. A. (Principal Investigator)

1978-01-01

The author has identified the following significant results. A color film generation method that maximally expands the chromaticity and aligns Kauth brightness with the gray axis was presented. In comparison with the current LACIE film product, the new color film product has more contrast and more colors and appears to be brighter. The field boundaries in the new product were more pronounced than in the current LACIE product. The speckle effect was one problem in the new product. The yellowness speckle can be treated using an equation. This equation can be used to eliminate any speckle introduced by the greenness. This product leads logically toward another that will employ quantitative colorimetry which will account for some of the eye's perception of color stimuli.

ONLINE MINIMIZATION OF VERTICAL BEAM SIZES AT APS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sun, Yipeng

In this paper, online minimization of vertical beam sizes along the APS (Advanced Photon Source) storage ring is presented. A genetic algorithm (GA) was developed and employed for the online optimization in the APS storage ring. A total of 59 families of skew quadrupole magnets were employed as knobs to adjust the coupling and the vertical dispersion in the APS storage ring. Starting from initially zero current skew quadrupoles, small vertical beam sizes along the APS storage ring were achieved in a short optimization time of one hour. The optimization results from this method are briefly compared with the onemore » from LOCO (Linear Optics from Closed Orbits) response matrix correction.« less

Green and Bio-Based Solvents.

PubMed

Calvo-Flores, Francisco G; Monteagudo-Arrebola, María José; Dobado, José A; Isac-García, Joaquín

2018-04-24

Chemical reactions and many of the procedures of separation and purification employed in industry, research or chemistry teaching utilize solvents massively. In the last decades, with the birth of Green Chemistry, concerns about the employment of solvents and the effects on human health, as well as its environmental impacts and its dependence on non-renewable raw materials for manufacturing most of them, has drawn the attention of the scientific community. In this work, we review the concept of green solvent and the properties and characteristics to be considered green. Additionally, we discuss the different possible routes to prepare many solvents from biomass, as an alternative way to those methods currently applied in the petrochemical industry.

Compact High Current Rare-Earth Emitter Hollow Cathode for Hall Effect Thrusters

NASA Technical Reports Server (NTRS)

Goebel, Dan M. (Inventor); Watkins, Ronnie M. (Inventor); Hofer, Richard R. (Inventor)

2012-01-01

An apparatus and method for achieving an efficient central cathode in a Hall effect thruster is disclosed. A hollow insert disposed inside the end of a hollow conductive cathode comprises a rare-earth element and energized to emit electrons from an inner surface. The cathode employs an end opening having an area at least as large as the internal cross sectional area of the rare earth insert to enhance throughput from the cathode end. In addition, the cathode employs a high aspect ratio geometry based on the cathode length to width which mitigates heat transfer from the end. A gas flow through the cathode and insert may be impinged by the emitted electrons to yield a plasma. One or more optional auxiliary gas feeds may also be employed between the cathode and keeper wall and external to the keeper near the outlet.

12 CFR 27.3 - Recordkeeping requirements.

Code of Federal Regulations, 2010 CFR

2010-01-01

... employed by the current employer of the applicant(s). For self-employed persons, the number of continuous years self-employed. (xiii) Gross total monthly income of each applicant, comprising the sum of normal... or disability income and income from part-time employment. For self-employed persons, include the...

Robust Statistical Approaches for RSS-Based Floor Detection in Indoor Localization.

PubMed

Razavi, Alireza; Valkama, Mikko; Lohan, Elena Simona

2016-05-31

Floor detection for indoor 3D localization of mobile devices is currently an important challenge in the wireless world. Many approaches currently exist, but usually the robustness of such approaches is not addressed or investigated. The goal of this paper is to show how to robustify the floor estimation when probabilistic approaches with a low number of parameters are employed. Indeed, such an approach would allow a building-independent estimation and a lower computing power at the mobile side. Four robustified algorithms are to be presented: a robust weighted centroid localization method, a robust linear trilateration method, a robust nonlinear trilateration method, and a robust deconvolution method. The proposed approaches use the received signal strengths (RSS) measured by the Mobile Station (MS) from various heard WiFi access points (APs) and provide an estimate of the vertical position of the MS, which can be used for floor detection. We will show that robustification can indeed increase the performance of the RSS-based floor detection algorithms.

Linear and nonlinear dynamic analysis of redundant load path bearingless rotor systems

NASA Technical Reports Server (NTRS)

Murthy, V. R.

1985-01-01

The bearingless rotorcraft offers reduced weight, less complexity and superior flying qualities. Almost all the current industrial structural dynamic programs of conventional rotors which consist of single load path rotor blades employ the transfer matrix method to determine natural vibration characteristics because this method is ideally suited for one dimensional chain like structures. This method is extended to multiple load path rotor blades without resorting to an equivalent single load path approximation. Unlike the conventional blades, it isk necessary to introduce the axial-degree-of-freedom into the solution process to account for the differential axial displacements in the different load paths. With the present extension, the current rotor dynamic programs can be modified with relative ease to account for the multiple load paths without resorting to the equivalent single load path modeling. The results obtained by the transfer matrix method are validated by comparing with the finite element solutions. A differential stiffness matrix due to blade rotation is derived to facilitate the finite element solutions.

Supported employment for persons with serious mental illness: current status and future directions.

PubMed

Mueser, K T; McGurk, S R

2014-06-01

The individual placement and supported (IPS) model of supported employment is the most empirically validated model of vocational rehabilitation for persons with schizophrenia or another serious mental illness. Over 18 randomized controlled trials have been conducted throughout the world demonstrating the effectiveness of supported employment at improving competitive work compared to other vocational programs: IPS supported employment is defined by the following principles: 1) inclusion of all clients who want to work; 2) integration of vocational and clinical services; 3) focus on competitive employment; 4) rapid job search and no required prevocational skills training; 5) job development by the employment specialist; 6) attention to client preferences about desired work and disclosure of mental illness to prospective employers; 7) benefits counseling; and 8) follow-along supports after a job is obtained. Supported employment has been successfully implemented in a wide range of cultural and clinical populations, although challenges to implementation are also encountered. Common challenges are related to problems such as the failure to access technical assistance, system issues, negative beliefs and attitudes of providers, funding restrictions, and poor leadership. These challenges can be overcome by tapping expertise in IPS supported employment, including standardized and tested models of training and consultation. Efforts are underway to increase the efficiency of training methods for supported employment and the overall program, and to improve its effectiveness for those clients who do not benefit. Progress in IPS supported employment offers people with a serious mental illness realistic hope for achieving their work goals, and taking greater control over their lives. Copyright © 2014. Published by Elsevier Masson SAS.

Mixture distributions of wind speed in the UAE

NASA Astrophysics Data System (ADS)

Shin, J.; Ouarda, T.; Lee, T. S.

2013-12-01

Wind speed probability distribution is commonly used to estimate potential wind energy. The 2-parameter Weibull distribution has been most widely used to characterize the distribution of wind speed. However, it is unable to properly model wind speed regimes when wind speed distribution presents bimodal and kurtotic shapes. Several studies have concluded that the Weibull distribution should not be used for frequency analysis of wind speed without investigation of wind speed distribution. Due to these mixture distributional characteristics of wind speed data, the application of mixture distributions should be further investigated in the frequency analysis of wind speed. A number of studies have investigated the potential wind energy in different parts of the Arabian Peninsula. Mixture distributional characteristics of wind speed were detected from some of these studies. Nevertheless, mixture distributions have not been employed for wind speed modeling in the Arabian Peninsula. In order to improve our understanding of wind energy potential in Arabian Peninsula, mixture distributions should be tested for the frequency analysis of wind speed. The aim of the current study is to assess the suitability of mixture distributions for the frequency analysis of wind speed in the UAE. Hourly mean wind speed data at 10-m height from 7 stations were used in the current study. The Weibull and Kappa distributions were employed as representatives of the conventional non-mixture distributions. 10 mixture distributions are used and constructed by mixing four probability distributions such as Normal, Gamma, Weibull and Extreme value type-one (EV-1) distributions. Three parameter estimation methods such as Expectation Maximization algorithm, Least Squares method and Meta-Heuristic Maximum Likelihood (MHML) method were employed to estimate the parameters of the mixture distributions. In order to compare the goodness-of-fit of tested distributions and parameter estimation methods for sample wind data, the adjusted coefficient of determination, Bayesian Information Criterion (BIC) and Chi-squared statistics were computed. Results indicate that MHML presents the best performance of parameter estimation for the used mixture distributions. In most of the employed 7 stations, mixture distributions give the best fit. When the wind speed regime shows mixture distributional characteristics, most of these regimes present the kurtotic statistical characteristic. Particularly, applications of mixture distributions for these stations show a significant improvement in explaining the whole wind speed regime. In addition, the Weibull-Weibull mixture distribution presents the best fit for the wind speed data in the UAE.

Sensor-less pseudo-sinusoidal drive for a permanent-magnet brushless ac motor

NASA Astrophysics Data System (ADS)

Liu, Li-Hsiang; Chern, Tzuen-Lih; Pan, Ping-Lung; Huang, Tsung-Mou; Tsay, Der-Min; Kuang, Jao-Hwa

2012-04-01

The precise rotor-position information is required for a permanent-magnet brushless ac motor (BLACM) drive. In the conventional sinusoidal drive method, either an encoder or a resolver is usually employed. For position sensor-less vector control schemes, the rotor flux estimation and torque components are obtained by complicated coordinate transformations. These computational intensive methods are susceptible to current distortions and parameter variations. To simplify the method complexity, this work presents a sensor-less pseudo-sinusoidal drive scheme with speed control for a three-phase BLACM. Based on the sinusoidal drive scheme, a floating period of each phase current is inserted for back electromotive force detection. The zero-crossing point is determined directly by the proposed scheme, and the rotor magnetic position and rotor speed can be estimated simultaneously. Several experiments for various active angle periods are undertaken. Furthermore, a current feedback control is included to minimize and compensate the torque fluctuation. The experimental results show that the proposed method has a competitive performance compared with the conventional drive manners for BLACM. The proposed scheme is straightforward, bringing the benefits of sensor-less drive and negating the need for coordinate transformations in the operating process.

Dispersive traveling wave solutions of the Equal-Width and Modified Equal-Width equations via mathematical methods and its applications

NASA Astrophysics Data System (ADS)

Lu, Dianchen; Seadawy, Aly R.; Ali, Asghar

2018-06-01

The Equal-Width and Modified Equal-Width equations are used as a model in partial differential equations for the simulation of one-dimensional wave transmission in nonlinear media with dispersion processes. In this article we have employed extend simple equation method and the exp(-varphi(ξ)) expansion method to construct the exact traveling wave solutions of equal width and modified equal width equations. The obtained results are novel and have numerous applications in current areas of research in mathematical physics. It is exposed that our method, with the help of symbolic computation, provides a effective and powerful mathematical tool for solving different kind nonlinear wave problems.

Method for fabricating transistors using crystalline silicon devices on glass

DOEpatents

McCarthy, Anthony M.

1997-01-01

A method for fabricating transistors using single-crystal silicon devices on glass. This method overcomes the potential damage that may be caused to the device during high voltage bonding and employs a metal layer which may be incorporated as part of the transistor. This is accomplished such that when the bonding of the silicon wafer or substrate to the glass substrate is performed, the voltage and current pass through areas where transistors will not be fabricated. After removal of the silicon substrate, further metal may be deposited to form electrical contact or add functionality to the devices. By this method both single and gate-all-around devices may be formed.

Method for fabricating transistors using crystalline silicon devices on glass

DOEpatents

McCarthy, A.M.

1997-09-02

A method for fabricating transistors using single-crystal silicon devices on glass. This method overcomes the potential damage that may be caused to the device during high voltage bonding and employs a metal layer which may be incorporated as part of the transistor. This is accomplished such that when the bonding of the silicon wafer or substrate to the glass substrate is performed, the voltage and current pass through areas where transistors will not be fabricated. After removal of the silicon substrate, further metal may be deposited to form electrical contact or add functionality to the devices. By this method both single and gate-all-around devices may be formed. 13 figs.

Methods and apparatus for controlling respective load currents of multiple series-connected loads

DOEpatents

Datta, Michael; Lys, Ihor

2014-05-27

A lighting apparatus (100) includes one or more first LEDs (202) for generating a first spectrum of radiation (503), and one or more second LEDs (204) for generating a second different spectrum radiation (505). The first and second LEDs are electrically connected in series between a first node (516A) and a second node (516B), between which a series current (550) flows with the application of an operating voltage (516) across the nodes. A controllable current path (518) is connected in parallel with one or both of the first and second LEDs so as to at least partially divert the series current, such that a first current (552) through the first LED(s) and a second current (554) through the second LED(s) are different. Such current diversion techniques may be employed to compensate for shifts in color or color temperature of generated light during thermal transients, due to different temperature-dependent current-to-flux relationships for different types of LEDs.

Which level of competence and performance is expected? A survey among European employers of public health professionals.

PubMed

Vukovic, Dejana; Bjegovic-Mikanovic, Vesna; Otok, Robert; Czabanowska, Katarzyna; Nikolic, Zeljka; Laaser, Ulrich

2014-02-01

To explore largely unknown experience and expectations of European employers of public health professionals with regard to competences required to perform in the best way for the public health. A survey targeting employers in Europe was carried out September 2011–October 2012. The web-based questionnaire on public health competences and expected performance levels was returned by 63 organisations out of 109 contacted (57.8 %) as provided by Schools and Departments of Public Health (SDPH) in 30 European countries. The assessment of the current and desired levels of performance did not show significant differences between employer categories. However, current and desired levels across all employers differ significantly (p < 0.001), varying around a difference of one rank of a five-point scale. On the other hand, SDPH rank the exit qualifications of their graduates with one exception (presumed competences in preparedness for public health emergencies) higher than the current performance level as determined by employers, i.e. closer to their expectations. SDPH should reconsider priorities and question their estimate of exit qualifications in close contact with potential employers of their graduates.

Methods to assess Drosophila heart development, function and aging

PubMed Central

Ocorr, Karen; Vogler, Georg; Bodmer, Rolf

2014-01-01

In recent years the Drosophila heart has become an established model of many different aspects of human cardiac disease. This model has allowed identification of disease-causing mechanisms underlying congenital heart disease and cardiomyopathies and has permitted the study underlying genetic, metabolic and age-related contributions to heart function. In this review we discuss methods currently employed in the analysis of the Drosophila heart structure and function, such as optical methods to infer heart function and performance, electrophysiological and mechanical approaches to characterize cardiac tissue properties, and conclude with histological techniques used in the study of heart development and adult structure. PMID:24727147

[Forensic medical diagnostics of intra-vitality of the strangulation mark by morphological methods].

PubMed

Bogomolov, D V; Zbrueva, Yu V; Putintsev, V A; Denisova, O P

2016-01-01

The objective of the present study WaS to overview the current domestic and foreign literature concerning the up-to-date methods employed for the expert evaluation of intra-vitality of the strangulation mark. The secondary objective was to propose the new approaches for addressing this problem. The methods of expert diagnostics with a view to determining the time of infliction of injuries as exemplified by mechanical asphyxia are discussed. It is concluded that immunohistochemical and morphometric studies provide the most promising tools for the evaluation of intra-vitality of the strangulation mark for the purpose of forensic medical expertise.

Transistors using crystalline silicon devices on glass

DOEpatents

McCarthy, Anthony M.

1995-01-01

A method for fabricating transistors using single-crystal silicon devices on glass. This method overcomes the potential damage that may be caused to the device during high voltage bonding and employs a metal layer which may be incorporated as part of the transistor. This is accomplished such that when the bonding of the silicon wafer or substrate to the glass substrate is performed, the voltage and current pass through areas where transistors will not be fabricated. After removal of the silicon substrate, further metal may be deposited to form electrical contact or add functionality to the devices. By this method both single and gate-all-around devices may be formed.

The influence of TIG-Arc physical characteristics on the penetration and weld width under different Ar and He supply conditions

NASA Astrophysics Data System (ADS)

Dai, Hongbin; Shen, Xiuqiang; Wang, Haoran

2018-06-01

In the paper, the 5A03 aluminium alloy was employed to study the influence of TIG arc on the penetration and the weld width. And the split anode method with water-cooled copper plate was used to measure and record the distribution of arc current, under different flow ratio of argon and helium conditions. And a gas supply device controlled by a solenoid valve was employed to obtain the stable TIG welding arc of gas supply alternately at the frequency of 1 Hz and 4 Hz, and then collected the phenomenon of arc alternate by the high-speed camera. The experimental results indicated that the current density at the arc anode center of argon and helium supply alternately with different mixing ratio is lower than that of the pure argon-arc center. Nonetheless, the former is more uniform in current density within 2 mm from the arc center. Furthermore, it presented as a component arc of argon-arc and helium-arc switched, with the condition of argon and helium supply alternately at a frequency of 1 Hz and the arc power density is greater and concentrated, leading to the wider and deeper weld.

Employment among patients with multiple sclerosis-a population study.

PubMed

Bøe Lunde, Hanne Marie; Telstad, Wenche; Grytten, Nina; Kyte, Lars; Aarseth, Jan; Myhr, Kjell-Morten; Bø, Lars

2014-01-01

To investigate demographic and clinical factors associated with employment in MS. The study included 213 (89.9%) of all MS patients in Sogn and Fjordane County, Western Norway at December 31st 2010. The patients underwent clinical evaluation, structured interviews and completed self-reported questionnaires. Demographic and clinical factors were compared between patients being employed versus patients being unemployed and according to disease course of MS. Logistic regression analysis was used to identify factors independently associated with current employment. After a mean disease duration of almost 19 years, 45% of the population was currently full-time or part- time employed. Patients with relapsing -remitting MS (RRMS) had higher employment rate than patients with secondary (SPMS) and primary progressive (PPMS). Higher educated MS patients with lower age at onset, shorter disease duration, less severe disability and less fatigue were most likely to be employed. Nearly half of all MS patients were still employed after almost two decades of having MS. Lower age at onset, shorter disease duration, higher education, less fatigue and less disability were independently associated with current employment. These key clinical and demographic factors are important to understand the reasons to work ability in MS. The findings highlight the need for environmental adjustments at the workplace to accommodate individual 's needs in order to improve working ability among MS patients.

Extraction and identification of cyclobutanones from irradiated cheese employing a rapid direct solvent extraction method.

PubMed

Tewfik, Ihab

2008-01-01

2-Alkylcyclobutanones (cyclobutanones) are accepted as chemical markers for irradiated foods containing lipid. However, current extraction procedures (Soxhlet-florisil chromatography) for the isolation of these markers involve a long and tedious clean-up regime prior to gas chromatography-mass spectrophotometry identification. This paper outlines an alternative isolation and clean-up method for the extraction of cyclobutanones in irradiated Camembert cheese. The newly developed direct solvent extraction method enables the efficient screening of large numbers of food samples and is not as resource intensive as the BS EN 1785:1997 method. Direct solvent extraction appears to be a simple, robust method and has the added advantage of a considerably shorter extraction time for the analysis of foods containing lipid.

Training Manpower Development Work Supervisors in the Use of Behavior Modification Techniques to Teach Job-Required Skills. Special Report.

ERIC Educational Resources Information Center

Neiswender, Lenore

The paper describes a current research project now being conducted by the Experimental Manpower Laboratory at Mobilization for Youth (MFY-EML) in New York City. The overall objective of the MFY-EML is to develop and test new methods of teaching vocational skills to hard-to-employ youth. The MFY-EML is involved in developing a program to teach…

The mental health benefits of work: do they apply to poor single mothers?

PubMed

Zabkiewicz, Denise

2010-01-01

The relationship between employment and improved mental health is well documented. However, no research has examined whether this relationship applies to poor single mothers. Given recent changes in the labor market where poor women are disproportionately employed in unstable jobs, the competing demands of work and childcare may operate to prevent poor women from reaping the mental health benefits of employment. Understanding these connections has become more salient not just for mental health epidemiology but for policies targeting employment and poverty. This study draws on four waves of data from the Welfare Client Longitudinal Study. Generalized estimating equations are utilized to assess the role of current employment and employment continuity on the depression status of poor single mothers over time. Through a comparison of results drawn from a dichotomous categorization of current employment with results drawn from measures of employment continuity, this study is also able to assess whether it is employment per se or the characteristics of employment that matter. Overall, the results from this study suggest that current employment improves the mental health of many poor single mothers. However, the circumstances most likely to improve their mental health are full-time or stable, longer term employment. The results from this study are of concern given that the lack of employment continuity is a growing trend in the U.S. labor market and poor women are disproportionately employed in these types of unstable jobs. These findings, thus, have wide-reaching implications for welfare policy as they provide an important and timely perspective in our understanding of the impact of the changing face of employment on poor women.

Assessing the Contribution of Unstable Employment to Mortality in Posttransition Russia: Prospective Individual-Level Analyses From the Russian Longitudinal Monitoring Survey

PubMed Central

Bobak, Martin

2009-01-01

Objectives. We used the Russia Longitudinal Monitoring Survey (RLMS) to investigate associations between employment, socioeconomic position, and mortality. Methods. Data were from working-age respondents in 8 rounds (1994–2003) of the RLMS. We measured associations between education, occupation, unemployment, and insecure employment and mortality with Cox proportional hazards analyses. Results. Of 4465 men and 4158 women who were currently employed, 251 men and 34 women died. A third of employed respondents experienced wage arrears, and 10% experienced compulsory leave and payment in consumer goods. Insecure employment, more common among the less-educated and manual workers, fluctuated with macroeconomic measures. Mortality was significantly associated with payment in consumer goods among men (hazard ratio [HR] = 1.46; 95% confidence interval [CI] = 1.03, 2.07), compulsory unpaid leave among women (HR = 3.79; 95% CI = 1.82, 7.88), and male unemployment (HR = 1.88; 95% CI = 1.38, 2.55). Associations with death within 1 year of entry were generally somewhat stronger than the association with mortality over the whole study period. Conclusions. Unemployment and job insecurity predicted mortality, suggesting that they contributed to Russia's high mortality during the transition from communism. PMID:19696378

Effect of Alternating Current on the Cathodic Protection and Interface Structure of X80 Steel

PubMed Central

Wang, Huiru; Du, Cuiwei; Liu, Zhiyong; Wang, Luntao; Ding, De

2017-01-01

This study employs potential-monitoring techniques, cyclic voltammetry tests, alternating current (AC) voltammetry methods, and surface characterization to investigate the AC corrosion of cathodically protected X80 pipeline steel. In a non-passive neutral solution at pH 7.2, a sufficiently negative potential completely protects steel at an AC current density of 100 A/m2. In an alkaline solution at pH 9.6, more serious AC corrosion occurs at more negative cathodic protection (CP) potential, whereas without CP the steel suffers negligible corrosion. In addition, the interface capacitance increases with AC amplitude. Based on these results, the AC corrosion mechanisms that function under various conditions are analyzed and described. PMID:28773211

Fourier transform methods in local gravity modeling

NASA Technical Reports Server (NTRS)

Harrison, J. C.; Dickinson, M.

1989-01-01

New algorithms were derived for computing terrain corrections, all components of the attraction of the topography at the topographic surface and the gradients of these attractions. These algoriithms utilize fast Fourier transforms, but, in contrast to methods currently in use, all divergences of the integrals are removed during the analysis. Sequential methods employing a smooth intermediate reference surface were developed to avoid the very large transforms necessary when making computations at high resolution over a wide area. A new method for the numerical solution of Molodensky's problem was developed to mitigate the convergence difficulties that occur at short wavelengths with methods based on a Taylor series expansion. A trial field on a level surface is continued analytically to the topographic surface, and compared with that predicted from gravity observations. The difference is used to compute a correction to the trial field and the process iterated. Special techniques are employed to speed convergence and prevent oscillations. Three different spectral methods for fitting a point-mass set to a gravity field given on a regular grid at constant elevation are described. Two of the methods differ in the way that the spectrum of the point-mass set, which extends to infinite wave number, is matched to that of the gravity field which is band-limited. The third method is essentially a space-domain technique in which Fourier methods are used to solve a set of simultaneous equations.

The employment impacts of economy-wide investments in renewable energy and energy efficiency

NASA Astrophysics Data System (ADS)

Garrett-Peltier, Heidi

This dissertation examines the employment impacts of investments in renewable energy and energy efficiency in the U.S. A broad expansion of the use of renewable energy in place of carbon-based energy, in addition to investments in energy efficiency, comprise a prominent strategy to slow or reverse the effects of anthropogenic climate change. This study first explores the literature on the employment impacts of these investments. This literature to date consists mainly of input-output (I-O) studies or case studies of renewable energy and energy efficiency (REEE). Researchers are constrained, however, by their ability to use the I-O model to study REEE, since currently industrial codes do not recognize this industry as such. I develop and present two methods to use the I-O framework to overcome this constraint: the synthetic and integrated approaches. In the former, I proxy the REEE industry by creating a vector of final demand based on the industrial spending patterns of REEE firms as found in the secondary literature. In the integrated approach, I collect primary data through a nationwide survey of REEE firms and integrate these data into the existing I-O tables to explicitly identify the REEE industry and estimate the employment impacts resulting from both upstream and downstream linkages with other industries. The size of the REEE employment multiplier is sensitive to the choice of method, and is higher using the synthetic approach than using the integrated approach. I find that using both methods, the employment level per $1 million demand is approximately three times greater for the REEE industry than for fossil fuel (FF) industries. This implies that a shift to clean energy will result in positive net employment impacts. The positive effects stem mainly from the higher labor intensity of REEE in relation to FF, as well as from higher domestic content and lower average wages. The findings suggest that as we transition away from a carbon-based energy system to more sustainable and low-carbon energy sources, approximately three jobs will be created in clean energy sectors for each job lost in the fossil fuel sector.

Predicting absorption and dispersion in acoustics by direct simulation Monte Carlo: Quantum and classical models for molecular relaxation.

PubMed

Hanford, Amanda D; O'Connor, Patrick D; Anderson, James B; Long, Lyle N

2008-06-01

In the current study, real gas effects in the propagation of sound waves are simulated using the direct simulation Monte Carlo method for a wide range of frequencies. This particle method allows for treatment of acoustic phenomena at high Knudsen numbers, corresponding to low densities and a high ratio of the molecular mean free path to wavelength. Different methods to model the internal degrees of freedom of diatomic molecules and the exchange of translational, rotational and vibrational energies in collisions are employed in the current simulations of a diatomic gas. One of these methods is the fully classical rigid-rotor/harmonic-oscillator model for rotation and vibration. A second method takes into account the discrete quantum energy levels for vibration with the closely spaced rotational levels classically treated. This method gives a more realistic representation of the internal structure of diatomic and polyatomic molecules. Applications of these methods are investigated in diatomic nitrogen gas in order to study the propagation of sound and its attenuation and dispersion along with their dependence on temperature. With the direct simulation method, significant deviations from continuum predictions are also observed for high Knudsen number flows.

Discharge estimation from H-ADCP measurements in a tidal river subject to sidewall effects and a mobile bed

NASA Astrophysics Data System (ADS)

Sassi, M. G.; Hoitink, A. J. F.; Vermeulen, B.; Hidayat, null

2011-06-01

Horizontal acoustic Doppler current profilers (H-ADCPs) can be employed to estimate river discharge based on water level measurements and flow velocity array data across a river transect. A new method is presented that accounts for the dip in velocity near the water surface, which is caused by sidewall effects that decrease with the width to depth ratio of a channel. A boundary layer model is introduced to convert single-depth velocity data from the H-ADCP to specific discharge. The parameters of the model include the local roughness length and a dip correction factor, which accounts for the sidewall effects. A regression model is employed to translate specific discharge to total discharge. The method was tested in the River Mahakam, representing a large river of complex bathymetry, where part of the flow is intrinsically three-dimensional and discharge rates exceed 8000 m3 s-1. Results from five moving boat ADCP campaigns covering separate semidiurnal tidal cycles are presented, three of which are used for calibration purposes, whereas the remaining two served for validation of the method. The dip correction factor showed a significant correlation with distance to the wall and bears a strong relation to secondary currents. The sidewall effects appeared to remain relatively constant throughout the tidal cycles under study. Bed roughness length is estimated at periods of maximum velocity, showing more variation at subtidal than at intratidal time scales. Intratidal variations were particularly obvious during bidirectional flow conditions, which occurred only during conditions of low river discharge. The new method was shown to outperform the widely used index velocity method by systematically reducing the relative error in the discharge estimates.

Impact of tube current modulation on lesion conspicuity index in hi-resolution chest computed tomography

NASA Astrophysics Data System (ADS)

Szczepura, Katy; Tomkinson, David; Manning, David

2017-03-01

Tube current modulation is a method employed in the use of CT in an attempt to optimize radiation dose to the patient. The acceptable noise (noise index) can be varied, based on the level of optimization required; higher accepted noise reduces the patient dose. Recent research [1] suggests that measuring the conspicuity index (C.I.) of focal lesions within an image is more reflective of a clinical reader's ability to perceive focal lesions than traditional physical measures such as contrast to noise (CNR) and signal to noise ratio (SNR). Software has been developed and validated to calculate the C.I. in DICOM images. The aim of this work is assess the impact of tube current modulation on conspicuity index and CTDIvol, to indicate the benefits and limitations of tube current modulation on lesion detectability. Method An anthropomorphic chest phantom was used "Lungman" with inserted lesions of varying size and HU (see table below) a range of Hounsfield units and sizes were used to represent the variation in lesion Hounsfield units found. This meant some lesions had negative Hounsfield unit values.

SU-G-BRA-06: Quantification of Tracking Performance of a Multi-Layer Electronic Portal Imaging Device

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hu, Y; Rottmann, J; Myronakis, M

2016-06-15

Purpose: The purpose of this study was to quantify the improvement in tumor tracking, with and without fiducial markers, afforded by employing a multi-layer (MLI) electronic portal imaging device (EPID) over the current state-of-the-art, single-layer, digital megavolt imager (DMI) architecture. Methods: An ideal observer signal-to-noise ratio (d’) approach was used to quantify the ability of an MLI EPID and a current, state-of-the-art DMI EPID to track lung tumors from the treatment beam’s-eye-view. Using each detector modulation transfer function (MTF) and noise power spectrum (NPS) as inputs, a detection task was employed with object functions describing simple three-dimensional Cartesian shapes (spheresmore » and cylinders). Marker-less tumor tracking algorithms often use texture discrimination to differentiate benign and malignant tissue. The performance of such algorithms is simulated by employing a discrimination task for the ideal observer, which measures the ability of a system to differentiate two image quantities. These were defined as the measured textures for benign and malignant lung tissue. Results: The NNPS of the MLI ∼25% of that of the DMI at the expense of decreased MTF at intermediate frequencies (0.25≤« less

Significance of the model considering mixed grain-size for inverse analysis of turbidites

NASA Astrophysics Data System (ADS)

Nakao, K.; Naruse, H.; Tokuhashi, S., Sr.

2016-12-01

A method for inverse analysis of turbidity currents is proposed for application to field observations. Estimation of initial condition of the catastrophic events from field observations has been important for sedimentological researches. For instance, there are various inverse analyses to estimate hydraulic conditions from topography observations of pyroclastic flows (Rossano et al., 1996), real-time monitored debris-flow events (Fraccarollo and Papa, 2000), tsunami deposits (Jaffe and Gelfenbaum, 2007) and ancient turbidites (Falcini et al., 2009). These inverse analyses need forward models and the most turbidity current models employ uniform grain-size particles. The turbidity currents, however, are the best characterized by variation of grain-size distribution. Though there are numerical models of mixed grain-sized particles, the models have difficulty in feasibility of application to natural examples because of calculating costs (Lesshaft et al., 2011). Here we expand the turbidity current model based on the non-steady 1D shallow-water equation at low calculation costs for mixed grain-size particles and applied the model to the inverse analysis. In this study, we compared two forward models considering uniform and mixed grain-size particles respectively. We adopted inverse analysis based on the Simplex method that optimizes the initial conditions (thickness, depth-averaged velocity and depth-averaged volumetric concentration of a turbidity current) with multi-point start and employed the result of the forward model [h: 2.0 m, U: 5.0 m/s, C: 0.01%] as reference data. The result shows that inverse analysis using the mixed grain-size model found the known initial condition of reference data even if the condition where the optimization started is deviated from the true solution, whereas the inverse analysis using the uniform grain-size model requires the condition in which the starting parameters for optimization must be in quite narrow range near the solution. The uniform grain-size model often reaches to local optimum condition that is significantly different from true solution. In conclusion, we propose a method of optimization based on the model considering mixed grain-size particles, and show its application to examples of turbidites in the Kiyosumi Formation, Boso Peninsula, Japan.

SU-E-T-37: A GPU-Based Pencil Beam Algorithm for Dose Calculations in Proton Radiation Therapy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kalantzis, G; Leventouri, T; Tachibana, H

Purpose: Recent developments in radiation therapy have been focused on applications of charged particles, especially protons. Over the years several dose calculation methods have been proposed in proton therapy. A common characteristic of all these methods is their extensive computational burden. In the current study we present for the first time, to our best knowledge, a GPU-based PBA for proton dose calculations in Matlab. Methods: In the current study we employed an analytical expression for the protons depth dose distribution. The central-axis term is taken from the broad-beam central-axis depth dose in water modified by an inverse square correction whilemore » the distribution of the off-axis term was considered Gaussian. The serial code was implemented in MATLAB and was launched on a desktop with a quad core Intel Xeon X5550 at 2.67GHz with 8 GB of RAM. For the parallelization on the GPU, the parallel computing toolbox was employed and the code was launched on a GTX 770 with Kepler architecture. The performance comparison was established on the speedup factors. Results: The performance of the GPU code was evaluated for three different energies: low (50 MeV), medium (100 MeV) and high (150 MeV). Four square fields were selected for each energy, and the dose calculations were performed with both the serial and parallel codes for a homogeneous water phantom with size 300×300×300 mm3. The resolution of the PBs was set to 1.0 mm. The maximum speedup of ∼127 was achieved for the highest energy and the largest field size. Conclusion: A GPU-based PB algorithm for proton dose calculations in Matlab was presented. A maximum speedup of ∼127 was achieved. Future directions of the current work include extension of our method for dose calculation in heterogeneous phantoms.« less

75 FR 71513 - Senior Community Service Employment Program; Notice of Proposed Rulemaking, Additional Indicator...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-23

... to the current measures of employment retention and customer satisfaction. DOL intends for the new...) Retention in unsubsidized employment for 1 year; (2) satisfaction of the participants, employers, and their... unsubsidized employment for 1 year; and (2) the satisfaction of participants, employers and their host agencies...

From Graduate Employability to Employment: Policy and Practice in UK Higher Education

ERIC Educational Resources Information Center

Minocha, Sonal; Hristov, Dean; Reynolds, Martin

2017-01-01

The purpose of this paper is to enrich the current conceptualization of graduate employability and employment through the lens of policy, academia and practice in UK higher education. We examine the UK policy context that is shaping graduate employability and employment debates before enriching this conceptualization through a discussion of key…

Modeling of the control of the driven current profile in ICRF MCCD on EAST plasma

NASA Astrophysics Data System (ADS)

Yin, L.; Yang, C.; Gong, X. Y.; Lu, X. Q.; Cao, J. J.; Wu, Z. Y.; Chen, Y.; Du, D.

2018-05-01

Control of the current profile is a crucial issue for improved confinement and the inhibition of instability in advanced tokamak operation. Using typical discharge data for the Experimental Advanced Superconducting Tokamak, numerical simulations of driven-current profile control in mode conversion current drive (MCCD) in the ion cyclotron range of frequencies were performed employing a full-wave method and Ehst-Karney efficiency formula. Results indicate that the driven current profile in MCCD can be effectively modified by shifting the mode conversion layer. The peak of the driven current can be located at an aimed position in the normalized minor radius range (-0.60 ≤r/a≤0) by changing the radiofrequency and the minority-ion concentration. The efficiency of the off-axis MCCD can reach 233 kA/MW through optimization, and the mode converted ion cyclotron wave plays an important role in such scenarios. The effects of electron temperature and plasma density on the driven current profile are also investigated.

Development of a full-waveform voltage and current recording device for multichannel transient electromagnetic transmitters

NASA Astrophysics Data System (ADS)

Zhang, Xinyue; Zhang, Qisheng; Wang, Meng; Kong, Qiang; Zhang, Shengquan; He, Ruihao; Liu, Shenghui; Li, Shuhan; Yuan, Zhenzhong

2017-11-01

Due to the pressing demand for metallic ore exploration technology in China, several new technologies are being employed in the relevant exploration instruments. In addition to possessing the high resolution of the traditional transient electromagnetic method, high-efficiency measurements, and a short measurement time, the multichannel transient electromagnetic method (MTEM) technology can also sensitively determine the characteristics of a low-resistivity geologic body, without being affected by the terrain. Besides, the MTEM technology also solves the critical, existing interference problem in electrical exploration technology. This study develops a full-waveform voltage and current recording device for MTEM transmitters. After continuous acquisition and storage of the large, pseudo-random current signals emitted by the MTEM transmitter, these signals are then convoluted with the signals collected by the receiver to obtain the earth's impulse response. In this paper, the overall design of the full-waveform recording apparatus, including the hardware and upper-computer software designs, the software interface display, and the results of field test, is discussed in detail.

Numerical investigation of flow motion and performance of a horizontal axis tidal turbine subjected to a steady current

NASA Astrophysics Data System (ADS)

Li, Lin-juan; Zheng, Jin-hai; Peng, Yu-xuan; Zhang, Ji-sheng; Wu, Xiu-guang

2015-04-01

Horizontal axis tidal turbines have attracted more and more attentions nowadays, because of their convenience and low expense in construction and high efficiency in extracting tidal energy. The present study numerically investigates the flow motion and performance of a horizontal axis tidal turbine with a supporting vertical cylinder under steady current. In the numerical model, the continuous equation and incompressible Reynolds-averaged Navier-Stokes equations are solved, and the volume of fluid method is employed to track free surface motion. The RNG k- ɛ model is adopted to calculate turbulence transport while the fractional area/volume obstacle representation method is used to describe turbine characteristics and movement. The effects of installation elevation of tidal turbine and inlet velocity on the water elevation, and current velocity, rotating speed and resultant force on turbine are discussed. Based on the comparison of the numerical results, a better understanding of flow structure around horizontal axis tidal turbine and turbine performance is achieved.

Payment Mechanisms for Community Employment: Realities and Recommendations.

ERIC Educational Resources Information Center

Hagner, David; And Others

1987-01-01

The article describes the payment mechanisms currently available to reimburse workers with severe disabilities for work performed. The advantages and disadvantages of competitive employment at or above minimum wage, competitive employment below minimum wage, contracted employment through a rehabilitation agency, and self-employment are discussed.…

Shaping charge excitations in chiral edge states with a time-dependent gate voltage

NASA Astrophysics Data System (ADS)

Misiorny, Maciej; Fève, Gwendal; Splettstoesser, Janine

2018-02-01

We study a coherent conductor supporting a single edge channel in which alternating current pulses are created by local time-dependent gating and sent on a beam-splitter realized by a quantum point contact. The current response to the gate voltage in this setup is intrinsically linear. Based on a fully self-consistent treatment employing a Floquet scattering theory, we analyze the effect of different voltage shapes and frequencies, as well as the role of the gate geometry on the injected signal. In particular, we highlight the impact of frequency-dependent screening on the process of shaping the current signal. The feasibility of creating true single-particle excitations with this method is confirmed by investigating the suppression of excess noise, which is otherwise created by additional electron-hole pair excitations in the current signal.

Production of NOx by Lightning and its Effects on Atmospheric Chemistry

NASA Technical Reports Server (NTRS)

Pickering, Kenneth E.

2009-01-01

Production of NO(x) by lightning remains the NO(x) source with the greatest uncertainty. Current estimates of the global source strength range over a factor of four (from 2 to 8 TgN/year). Ongoing efforts to reduce this uncertainty through field programs, cloud-resolved modeling, global modeling, and satellite data analysis will be described in this seminar. Representation of the lightning source in global or regional chemical transport models requires three types of information: the distribution of lightning flashes as a function of time and space, the production of NO(x) per flash, and the effective vertical distribution of the lightning-injected NO(x). Methods of specifying these items in a model will be discussed. For example, the current method of specifying flash rates in NASA's Global Modeling Initiative (GMI) chemical transport model will be discussed, as well as work underway in developing algorithms for use in the regional models CMAQ and WRF-Chem. A number of methods have been employed to estimate either production per lightning flash or the production per unit flash length. Such estimates derived from cloud-resolved chemistry simulations and from satellite NO2 retrievals will be presented as well as the methodologies employed. Cloud-resolved model output has also been used in developing vertical profiles of lightning NO(x) for use in global models. Effects of lightning NO(x) on O3 and HO(x) distributions will be illustrated regionally and globally.

Education and employment status of adults with autism spectrum disorders in Germany - a cross-sectional-survey.

PubMed

Frank, Fabian; Jablotschkin, Martina; Arthen, Tobias; Riedel, Andreas; Fangmeier, Thomas; Hölzel, Lars P; Tebartz van Elst, Ludger

2018-03-27

Adults with autism spectrum disorders (ASD) experience challenges in participating in the labour market and struggle to achieve and maintain appropriate professional positions, possibly due to impairments of communication and social interaction. Studies have shown high rates of unemployment as well as evidence of inadequate employment. As knowledge on the participation in the German labour market is scarce, the aim of our study was to examine employment status, type of occupation and inadequate employment in a sample of clinically mostly late-diagnosed and most likely not intellectually disabled adults with ASD in Germany. We conducted a cross-sectional-survey in clinically mostly late-diagnosed adults with ASD. Employment status, type of occupation, and the level of formal education and training were examined through a postal questionnaire. Inadequate employment regarding participants' current and longest practised occupation was assessed by transforming participants' information into skill levels of the "Classification of Occupations 2010" of the German Federal Employment Agency, and comparing these with participants' level of formal education and training. The response rate was 43.2% (N = 185 of N = 428 potential participants). 94.6% were first-time diagnosed when being 18 years of age or older. 56.8% held a general university entrance-level qualification and 24.9% had obtained a Masters' or diploma degree as their highest vocational qualification. 94.1% had been employed at some time. Of these, 68.4% reported being currently employed, 13.5% being currently unemployed and 17.0% being retired for health reasons. Regarding the longest-practised and the current occupation, the highest proportion of participants was found in the occupational area "health and social sector, teaching and education" (22.4% and 23.3%, respectively). With respect to inadequate employment, 22.1% were found to be overeducated in relation to their longest-practised occupation and 31.3% in relation to their current occupation. This is significantly higher than the percentage of overeducation in the general population. Despite largely high formal qualifications, the clinically mostly late-diagnosed adults with ASD represented in our sample are disadvantaged regarding their participation in the German labour market, especially with respect to rates of unemployment, early retirement and overeducation. Employment support programs should be developed to improve employment outcomes.

Frontiers of two-dimensional correlation spectroscopy. Part 2. Perturbation methods, fields of applications, and types of analytical probes

NASA Astrophysics Data System (ADS)

Noda, Isao

2014-07-01

Noteworthy experimental practices, which are advancing forward the frontiers of the field of two-dimensional (2D) correlation spectroscopy, are reviewed with the focus on various perturbation methods currently practiced to induce spectral changes, pertinent examples of applications in various fields, and types of analytical probes employed. Types of perturbation methods found in the published literature are very diverse, encompassing both dynamic and static effects. Although a sizable portion of publications report the use of dynamic perturbatuions, much greater number of studies employ static effect, especially that of temperature. Fields of applications covered by the literature are also very broad, ranging from fundamental research to practical applications in a number of physical, chemical and biological systems, such as synthetic polymers, composites and biomolecules. Aside from IR spectroscopy, which is the most commonly used tool, many other analytical probes are used in 2D correlation analysis. The ever expanding trend in depth, breadth and versatility of 2D correlation spectroscopy techniques and their broad applications all point to the robust and healthy state of the field.

Temperature Control in a Franz Diffusion Cell Skin Sonoporation Setup

NASA Astrophysics Data System (ADS)

Robertson, Jeremy; Becker, Sid

2017-11-01

In vitro experimental studies that investigate ultrasound enhanced transdermal drug delivery employ Franz diffusion cells. Because of absorption, the temperature of the coupling fluid often increases drastically during the ultrasound application. The current methodologies for controlling the coupling fluid temperature require either replacement of the coupling fluid during the experiment or the application of a time consuming duty cycle. This paper introduces a novel method for temperature control that allows for a wide variety of coupling fluid temperatures to be maintained. This method employs a peristaltic pump to circulate the coupling fluid through a thermoelectric cooling device. This temperature control method allowed for an investigation into the role of coupling fluid temperature on the inertial cavitation that impacts the skin aperture (inertial cavitation is thought to be the main cause of ultrasound induced skin permeability increase). Both foil pitting and passive cavitation detection experiments indicated that effective inertial cavitation activity decreases with increasing coupling fluid temperature. This finding suggests that greater skin permeability enhancement can be achieved if a lower coupling fluid temperature is maintained during skin insonation.

Identifying the 'right patient': nurse and consumer perspectives on verifying patient identity during medication administration.

PubMed

Kelly, Teresa; Roper, Cath; Elsom, Stephen; Gaskin, Cadeyrn

2011-10-01

Accurate verification of patient identity during medication administration is an important component of medication administration practice. In medical and surgical inpatient settings, the use of identification aids, such as wristbands, is common. In many psychiatric inpatient units in Victoria, Australia, however, standardized identification aids are not used. The present paper outlines the findings of a qualitative research project that employed focus groups to examine mental health nurse and mental health consumer perspectives on the identification of patients during routine medication administration in psychiatric inpatient units. The study identified a range of different methods currently employed to verify patient identity, including technical methods, such as wristband and photographs, and interpersonal methods, such as patient recognition. There were marked similarities in the perspectives of mental health nurses and mental health consumers regarding their opinions and preferences. Technical aids were seen as important, but not as a replacement for the therapeutic nurse-patient encounter. © 2011 The Authors. International Journal of Mental Health Nursing © 2011 Australian College of Mental Health Nurses Inc.

Multiple Employment Training Programs. Major Overhaul Needed To Reduce Costs, Streamline the Bureaucracy, and Improve Results. Testimony before the Committee on Labor and Human Resources. U.S. Senate.

ERIC Educational Resources Information Center

Crawford, Clarence C.

Research conducted by the General Accounting Office (GAO) indicates that the current system of multiple employment training programs requires major overhaul to reduce costs, streamline the bureaucracy, and improve results. The current system of 163 different federal employment training programs wastes resources and confuses and frustrates clients,…

On the electromagnetic scattering from infinite rectangular grids with finite conductivity

NASA Technical Reports Server (NTRS)

Christodoulou, C. G.; Kauffman, J. F.

1986-01-01

A variety of methods can be used in constructing solutions to the problem of mesh scattering. However, each of these methods has certain drawbacks. The present paper is concerned with a new technique which is valid for all spacings. The new method involved, called the fast Fourier transform-conjugate gradient method (FFT-CGM), represents an iterative technique which employs the conjugate gradient method to improve upon each iterate, utilizing the fast Fourier transform. The FFT-CGM method provides a new accurate model which can be extended and applied to the more difficult problems of woven mesh surfaces. The formulation of the FFT-conjugate gradient method for aperture fields and current densities for a planar periodic structure is considered along with singular operators, the formulation of the FFT-CG method for thin wires with finite conductivity, and reflection coefficients.

Automated measurement system employing eddy currents to adjust probe position and determine metal hardness

DOEpatents

Prince, J.M.; Dodson, M.G.; Lechelt, W.M.

1989-07-18

A system for measuring the hardness of cartridge cases employs an eddy current probe for inducing and sensing eddy currents in each cartridge case. A first component of the sensed signal is utilized in a closed loop system for accurately positioning the probe relative to the cartridge case both in the lift off direction and in the tangential direction, and a second component of the sensed signal is employed as a measure of the hardness. The positioning and measurement are carried out under closed loop microprocessor control facilitating hardness testing on a production line basis. 14 figs.

Automated measurement system employing eddy currents to adjust probe position and determine metal hardness

DOEpatents

Prince, James M.; Dodson, Michael G.; Lechelt, Wayne M.

1989-01-01

A system for measuring the hardness of cartridge cases employs an eddy current probe for inducing and sensing eddy currents in each cartridge case. A first component of the sensed signal is utilized in a closed loop system for accurately positioning the probe relative to the cartridge case both in the lift off direction and in the tangential direction, and a second component of the sensed signal is employed as a measure of the hardness. The positioning and measurement are carried out under closed loop microprocessor control facilitating hardness testing on a production line basis.

Research summary

NASA Technical Reports Server (NTRS)

Siegmann, W. L.; Robertson, J. S.; Jacobson, M. J.

1993-01-01

The final report for progress during the period from 15 Nov. 1988 to 14 Nov. 1991 is presented. Research on methods for analysis of sound propagation through the atmosphere and on results obtained from application of our methods are summarized. Ten written documents of NASA research are listed, and these include publications, manuscripts accepted, submitted, or in preparation for publication, and reports. Twelve presentations of results, either at scientific conferences or at research or technical organizations, since the start of the grant period are indicated. Names of organizations to which software produced under the grant was distributed are provided, and the current arrangement whereby the software is being distributed to the scientific community is also described. Finally, the names of seven graduate students who worked on NASA research and received Rensselaer degrees during the grant period, along with their current employers are given.

Use of uterine electromyography to diagnose term and preterm labor

PubMed Central

LUCOVNIK, MIHA; KUON, RUBEN J.; CHAMBLISS, LINDA R.; MANER, WILLIAM L.; SHI, SHAO-QING; SHI, LEILI; BALDUCCI, JAMES; GARFIELD, ROBERT E.

2011-01-01

Current methodologies to assess the process of labor, such as tocodynamometry or intrauterine pressure catheters, fetal fibronectin, cervical length measurement and digital cervical examination, have several major drawbacks. They only measure the onset of labor indirectly and do not detect cellular changes characteristic of true labor. Consequently, their predictive values for term or preterm delivery are poor. Uterine contractions are a result of the electrical activity within the myometrium. Measurement of uterine electromyography (EMG) has been shown to detect contractions as accurately as the currently used methods. In addition, changes in cell excitability and coupling required for effective contractions that lead to delivery are reflected in changes of several EMG parameters. Use of uterine EMG can help to identify patients in true labor better than any other method presently employed in the clinic. PMID:21241260

Comparison through a LCA evaluation analysis of food waste disposal options from the perspective of global warming and resource recovery.

PubMed

Kim, Mi-Hyung; Kim, Jung-Wk

2010-09-01

This study evaluated feed manufacturing including dry feeding and wet feeding, composting, and landfilling for food waste disposal options from the perspective of global warming and resource recovery. The method of the expanded system boundaries was employed in order to compare different by-products. The whole stages of disposal involved in the systems such as separate discharge, collection, transportation, treatment, and final disposal, were included in the system boundary and evaluated. The Global Warming Potential generated from 1tonne of food wastes for each disposal system was analyzed by the life cycle assessment method. The results showed that 200kg of CO(2)-eq could be produced from dry feeding process, 61kg of CO(2)-eq from wet feeding process, 123kg of CO(2)-eq from composting process, and 1010kg of CO(2)-eq from landfilling. Feed manufacturing and composting, the common treatment methods currently employed, have been known to be environment friendlier than other methods. However, this study shows that they can negatively affect the environment if their by-products are not appropriately utilized as intended. Copyright 2010 Elsevier B.V. All rights reserved.

Optimal design strategy of switching converters employing current injected control

NASA Astrophysics Data System (ADS)

Lee, F. C.; Fang, Z. D.; Lee, T. H.

1985-01-01

This paper analyzes a buck/boost regulator employing current-injected control (CIC). It reveals the complex interactions between the dc loop and the current-injected loop and underlines the fundamental principle that governs the loop gain determination. Three commonly used compensation techniques are compared. The integral and lead/lag compensation are shown to be most desirable for performance optimization and stability.

Accelerated in-vitro release testing methods for extended-release parenteral dosage forms.

PubMed

Shen, Jie; Burgess, Diane J

2012-07-01

This review highlights current methods and strategies for accelerated in-vitro drug release testing of extended-release parenteral dosage forms such as polymeric microparticulate systems, lipid microparticulate systems, in-situ depot-forming systems and implants. Extended-release parenteral dosage forms are typically designed to maintain the effective drug concentration over periods of weeks, months or even years. Consequently, 'real-time' in-vitro release tests for these dosage forms are often run over a long time period. Accelerated in-vitro release methods can provide rapid evaluation and therefore are desirable for quality control purposes. To this end, different accelerated in-vitro release methods using United States Pharmacopeia (USP) apparatus have been developed. Different mechanisms of accelerating drug release from extended-release parenteral dosage forms, along with the accelerated in-vitro release testing methods currently employed are discussed. Accelerated in-vitro release testing methods with good discriminatory ability are critical for quality control of extended-release parenteral products. Methods that can be used in the development of in-vitro-in-vivo correlation (IVIVC) are desirable; however, for complex parenteral products this may not always be achievable. © 2012 The Authors. JPP © 2012 Royal Pharmaceutical Society.

Accelerated in vitro release testing methods for extended release parenteral dosage forms

PubMed Central

Shen, Jie; Burgess, Diane J.

2012-01-01

Objectives This review highlights current methods and strategies for accelerated in vitro drug release testing of extended release parenteral dosage forms such as polymeric microparticulate systems, lipid microparticulate systems, in situ depot-forming systems, and implants. Key findings Extended release parenteral dosage forms are typically designed to maintain the effective drug concentration over periods of weeks, months or even years. Consequently, “real-time” in vitro release tests for these dosage forms are often run over a long time period. Accelerated in vitro release methods can provide rapid evaluation and therefore are desirable for quality control purposes. To this end, different accelerated in vitro release methods using United States Pharmacopoeia (USP) apparatus have been developed. Different mechanisms of accelerating drug release from extended release parenteral dosage forms, along with the accelerated in vitro release testing methods currently employed are discussed. Conclusions Accelerated in vitro release testing methods with good discriminatory ability are critical for quality control of extended release parenteral products. Methods that can be used in the development of in vitro-in vivo correlation (IVIVC) are desirable, however for complex parenteral products this may not always be achievable. PMID:22686344

Employment from Solar Energy: A Bright but Partly Cloudy Future.

ERIC Educational Resources Information Center

Smeltzer, K. K.; Santini, D. J.

A comparison of quantitative and qualitative employment effects of solar and conventional systems can prove the increased employment postulated as one of the significant secondary benefits of a shift from conventional to solar energy use. Current quantitative employment estimates show solar technology-induced employment to be generally greater…

Supported Employment Handbook: A Customer-Driven Approach for Persons with Significant Disabilities.

ERIC Educational Resources Information Center

Brooke, Valerie, Ed.; And Others

This manual provides training information for implementing supported employment by using a customer-driven approach. Chapter 1, "Supported Employment: A Customer-Driven Approach" (Valerie Brooke and others), describes current best practices, a new customer-driven approach to supported employment, and the role of the employment specialist. Chapter…

20 CFR 209.7 - Employers' supplemental reports of service.

Code of Federal Regulations, 2010 CFR

2010-04-01

... RETIREMENT ACT RAILROAD EMPLOYERS' REPORTS AND RESPONSIBILITIES § 209.7 Employers' supplemental reports of service. Each employer shall furnish the Board a report of the current year service of each employee who... 20 Employees' Benefits 1 2010-04-01 2010-04-01 false Employers' supplemental reports of service...

Developing Employability Skills: Peer Assessment in Higher Education

ERIC Educational Resources Information Center

Cassidy, Simon

2006-01-01

Purpose: Reports examining graduate employment issues suggest that employers are concerned by the lack of employability skills exhibited by entry-level job applications. It is also suggested that employers consider it the responsibility of educational institutions to develop such skills. The current study seeks to identify peer assessment as a…

5 CFR 839.822 - Which employer is responsible for submitting the employee and employer retirement deductions and...

Code of Federal Regulations, 2010 CFR

2010-01-01

... 5 Administrative Personnel 2 2010-01-01 2010-01-01 false Which employer is responsible for... Contributions Records Correction § 839.822 Which employer is responsible for submitting the employee and...? Your current or most recent employer will be responsible for this purpose. Even if that employer was...

Non-Destructive Current Sensing for Energy Efficiency Monitoring in Buildings with Environmental Certification

PubMed Central

Mota, Lia Toledo Moreira; Mota, Alexandre de Assis; Coiado, Lorenzo Campos

2015-01-01

Nowadays, buildings environmental certifications encourage the implementation of initiatives aiming to increase energy efficiency in buildings. In these certification systems, increased energy efficiency arising from such initiatives must be demonstrated. Thus, a challenge to be faced is how to check the increase in energy efficiency related to each of the employed initiatives without a considerable building retrofit. In this context, this work presents a non-destructive method for electric current sensing to assess implemented initiatives to increase energy efficiency in buildings with environmental certification. This method proposes the use of a sensor that can be installed directly in the low voltage electrical circuit conductors that are powering the initiative under evaluation, without the need for reforms that result in significant costs, repair, and maintenance. The proposed sensor consists of three elements: an air-core transformer current sensor, an amplifying/filtering stage, and a microprocessor. A prototype of the proposed sensor was developed and tests were performed to validate this sensor. Based on laboratory tests, it was possible to characterize the proposed current sensor with respect to the number of turns and cross-sectional area of the primary and secondary coils. Furthermore, using the Least Squares Method, it was possible to determine the efficiency of the air core transformer current sensor (the best efficiency found, considering different test conditions, was 2%), which leads to a linear output response. PMID:26184208

Non-Destructive Current Sensing for Energy Efficiency Monitoring in Buildings with Environmental Certification.

PubMed

Mota, Lia Toledo Moreira; Mota, Alexandre de Assis; Coiado, Lorenzo Campos

2015-07-10

Nowadays, buildings environmental certifications encourage the implementation of initiatives aiming to increase energy efficiency in buildings. In these certification systems, increased energy efficiency arising from such initiatives must be demonstrated. Thus, a challenge to be faced is how to check the increase in energy efficiency related to each of the employed initiatives without a considerable building retrofit. In this context, this work presents a non-destructive method for electric current sensing to assess implemented initiatives to increase energy efficiency in buildings with environmental certification. This method proposes the use of a sensor that can be installed directly in the low voltage electrical circuit conductors that are powering the initiative under evaluation, without the need for reforms that result in significant costs, repair, and maintenance. The proposed sensor consists of three elements: an air-core transformer current sensor, an amplifying/filtering stage, and a microprocessor. A prototype of the proposed sensor was developed and tests were performed to validate this sensor. Based on laboratory tests, it was possible to characterize the proposed current sensor with respect to the number of turns and cross-sectional area of the primary and secondary coils. Furthermore, using the Least Squares Method, it was possible to determine the efficiency of the air core transformer current sensor (the best efficiency found, considering different test conditions, was 2%), which leads to a linear output response.

Pulse electro-deposition of copper on molybdenum for Cu(In,Ga)Se2 and Cu2ZnSnSe4 solar cell applications

NASA Astrophysics Data System (ADS)

Bi, Jinlian; Yao, Liyong; Ao, Jianping; Gao, Shoushuai; Sun, Guozhong; He, Qing; Zhou, Zhiqiang; Sun, Yun; Zhang, Yi

2016-09-01

The issues of rough surface morphology and the incorporated additives of the electro-deposited Cu layers, which exists in electrodeposition-based processes, is one of the major obstacles to improve the efficiency of Cu(In,Ga)Se2 (CIGSe) and Cu2ZnSnSe4 (CZTSe) solar cells. In this study, the pulse current electro-deposition method is employed to deposit smooth Cu film on Mo substrate in CuSO4 solution without any additives. Grain size of the deposited Cu film is decreased by high cathode polarization successfully. And the concentration polarization, which results from high pulse current density, is controlled successfully by adjusting the pulse frequency. Flat Cu film with smooth surface and compact structure is deposited as pulse current density @ 62.5 mA cm-2, pulse frequency @100,000 Hz, and duty cycle @ 25%. CIGSe and CZTSe absorber films with flat surface and uniform elemental distribution are prepared by selenizing the stacking metal layers electro-deposited by pulse current method. Finally, the CIGSe and CZTSe solar cells with conversion efficiency of 10.39% and 7.83% respectively are fabricated based on the smooth Cu films, which are better than the solar cells fabricated by the rough Cu film deposited by direct current electro-deposition method.

Flame spray pyrolysis for sensing at the nanoscale.

PubMed

Kemmler, J A; Pokhrel, S; Mädler, L; Weimar, U; Barsan, N

2013-11-08

Progress in developing novel gas sensors based on semiconducting metal oxides (SMOX) has been hindered by the cumbersome fabrication technologies currently employed. They involve time intensive synthesis procedures for gaining sensitive materials and preparation of the inks employed for realizing sensing layers. In this paper we review the opportunities offered by the relatively young method of flame spray pyrolysis, with which it is possible not only to synthesize a broad selection of SMOX in pure or doped form, but also to simultaneously deposit thick and highly porous gas sensitive films on a variety of substrates. In less than ten years the properties of nine base materials have been evaluated for all most relevant target gases and the obtained results are promising for future development.

Flame spray pyrolysis for sensing at the nanoscale

NASA Astrophysics Data System (ADS)

Kemmler, J. A.; Pokhrel, S.; Mädler, L.; Weimar, U.; Barsan, N.

2013-11-01

Progress in developing novel gas sensors based on semiconducting metal oxides (SMOX) has been hindered by the cumbersome fabrication technologies currently employed. They involve time intensive synthesis procedures for gaining sensitive materials and preparation of the inks employed for realizing sensing layers. In this paper we review the opportunities offered by the relatively young method of flame spray pyrolysis, with which it is possible not only to synthesize a broad selection of SMOX in pure or doped form, but also to simultaneously deposit thick and highly porous gas sensitive films on a variety of substrates. In less than ten years the properties of nine base materials have been evaluated for all most relevant target gases and the obtained results are promising for future development.

Aerothermodynamic environment for a Titan probe with deployable decelerator

NASA Technical Reports Server (NTRS)

Green, M. J.; Swenson, B. L.; Balakrishnan, A.

1985-01-01

It is pointed out that further exploration of Titan, Saturn's largest moon, is of current interest to the scientific community, particularly from the standpoint of the organic chemical evolution of its atmosphere. For a suitable study of this Saturnian satellite, a mission involving a Titan atmospheric entry probe is to be conducted. The probe is to employ a deployable decelerator with the aim to allow scientific measurements in the haze layer. The present investigation is concerned with an assessment of the aerothermodynamic environment for the considered probe during its hypervelocity, low-Reynolds-number entry. Attention is given to the employed computational method, the Titan probe configuration, the Titan probe trajectory, the viscous-layer regime of the aerothermodynamic environment, and the incipient merged-layer regime.

Precarious Employment and Quality of Employment in Relation to Health and Well-being in Europe.

PubMed

Julià, Mireia; Vanroelen, Christophe; Bosmans, Kim; Van Aerden, Karen; Benach, Joan

2017-07-01

This article presents an overview of the recent work on precarious employment and employment quality in relation to workers' health and well-being. More specifically, the article mainly reviews the work performed in the E.U. 7th Framework project, SOPHIE. First, we present our overarching conceptual framework. Then, we provide a compiled overview of the evidence on the sociodemographic and European cross-country distribution of employment quality and employment precariousness. Subsequently, we provide the current evidence regarding the relations with health and broader worker well-being indicators. A final section summarizes current insights on the pathways relating precarious employment and health and well-being. The article concludes with a plea for further data collection and research into the longitudinal effects of employment precariousness among emerging groups of workers. Based on the evidence compiled in this article, policymakers should be convinced of the harmful health and well-being effects of employment precariousness and (further) labor market flexibilization.

Note: Progress on the use of MgB2 superconducting joint technique for the development of MgB2 magnets for magnetic resonance imaging (MRI).

PubMed

Kim, Y G; Song, J B; Kim, J C; Kim, J M; Yoo, B H; Yun, S B; Hwang, D Y; Lee, H G

2017-08-01

This note presents a superconducting joint technique for the development of MgB 2 magnetic resonance imaging (MRI) magnets. The MgB 2 superconducting joint was fabricated by a powder processing method using Mg and B powders to establish a wire-bulk-wire connection. The joint resistance measured using a field-decay method was <10 -14 Ω, demonstrating that the proposed joint technique could be employed for developing "next-generation" MgB 2 MRI magnets operating in the persistent current mode.

Electrolytic Cell For Production Of Aluminum Employing Planar Anodes.

DOEpatents

Barnett, Robert J.; Mezner, Michael B.; Bradford, Donald R

2004-10-05

A method of producing aluminum in an electrolytic cell containing alumina dissolved in an electrolyte, the method comprising providing a molten salt electrolyte having alumina dissolved therein in an electrolytic cell. A plurality of anodes and cathodes having planar surfaces are disposed in a generally vertical orientation in the electrolyte, the anodes and cathodes arranged in alternating or interleaving relationship to provide anode planar surfaces disposed opposite cathode planar surfaces, the anode comprised of carbon. Electric current is passed through anodes and through the electrolyte to the cathodes depositing aluminum at the cathodes and forming carbon containing gas at the anodes.

Conductivity detection for monitoring mixing reactions in microfluidic devices.

PubMed

Liu, Y; Wipf, D O; Henry, C S

2001-08-01

A conductivity detector was coupled to poly(dimethylsiloxane)-glass capillary electrophoresis microchips to monitor microfluidic flow. Electroosmotic flow was investigated with both conductivity detection (CD) and the current monitoring method. No significant variation was observed between these methods, but CD showed a lower relative standard deviation. Gradient mixing experiments were employed to investigate the relationship between the electrolyte conductivity and the electrolyte concentration. A good linear response of conductivity to concentration was obtained for solutions whose difference in concentrations were less than 27 mM. The new system holds great promise for precision mixing in microfluidic devices using electrically driven flows.

MMP Inhibitors: Past, present and future.

PubMed

Cathcart, Jillian M; Cao, Jian

2015-06-01

  Development of inhibitors of matrix metalloproteinases (MMPs) has been fraught with challenges. Early compounds largely failed due to poor selectivity and bioavailability. Dose-limiting side effects, off-target interactions, and improperly designed clinical trials significantly impeded clinical success. As information becomes available and technology evolves, tools to combat these obstacles have been developed. Improved methods for high throughput screening and drug design have led to identification of compounds exhibiting high potency, binding affinity, and favorable pharmacokinetic profiles. Current research into MMP inhibitors employs innovative approaches for drug delivery methods and allosteric inhibitors. Such innovation is key for development of clinically successful compounds.

Taenia asiatica: the most neglected human Taenia and the possibility of cysticercosis.

PubMed

Galán-Puchades, M Teresa; Fuentes, Mario V

2013-02-01

Not only Taenia solium and Taenia saginata, but also Taenia asiatica infects humans. The last species is not included in the evaluation of the specificity of the immunodiagnostic techniques for taeniasis/cysticercosis. There is currently no specific immunodiagnostic method for T. asiatica available. Therefore, due to the fact that molecular techniques (the only tool to distinguish the 3 Taenia species) are normally not employed in routine diagnostic methods, the 2 questions concerning T. asiatica (its definite geographic distribution and its ability to cause human cysticercosis), remain open, turning T. asiatica into the most neglected agent of human taeniasis-cysticercosis.

Terminate Lung Cancer (TLC) Study - A mixed-methods population approach to increase lung cancer screening awareness and low-dose computed tomography in Eastern Kentucky

PubMed Central

Cardarelli, Roberto; Reese, David; Roper, Karen L.; Cardarelli, Kathryn; Feltner, Frances J.; Studts, Jamie L.; Knight, Jennifer R.; Armstrong, Debra; Weaver, Anthony; Shaffer, Dana

2017-01-01

For low dose CT lung cancer screening to be effective in curbing disease mortality, efforts are needed to overcome barriers to awareness and facilitate uptake of the current evidence-based screening guidelines. A sequential mixed-methods approach was employed to design a screening campaign utilizing messages developed from community focus groups, followed by implementation of the outreach campaign intervention in two high-risk Kentucky regions. This study reports on rates of awareness and screening in intervention regions, as compared to a control region. PMID:27866066

Amino acids as a source of organic nitrogen in Antarctic endolithic microbial communities

NASA Technical Reports Server (NTRS)

McDonald, G.; Sun, H.

2002-01-01

In the Antarctic Dry Valleys, cryptoendolithic microbial communities occur within porous sandstone rocks. Current understanding of the mechanisms of physiological adaptation of these communities to the harsh Antarctic environment is limited, because traditional methods of studying microbial physiology are very difficult to apply to organisms with extremely low levels of metabolic activity. In order to fully understand carbon and nitrogen cycling and nutrient uptake in cryptoendolithic communities, and the metabolic costs that the organisms incur in order to survive, it is necessary to employ molecular geochemical techniques such as amino acid analysis in addition to physiological methods.

An accurate online calibration system based on combined clamp-shape coil for high voltage electronic current transformers.

PubMed

Li, Zhen-hua; Li, Hong-bin; Zhang, Zhi

2013-07-01

Electronic transformers are widely used in power systems because of their wide bandwidth and good transient performance. However, as an emerging technology, the failure rate of electronic transformers is higher than that of traditional transformers. As a result, the calibration period needs to be shortened. Traditional calibration methods require the power of transmission line be cut off, which results in complicated operation and power off loss. This paper proposes an online calibration system which can calibrate electronic current transformers without power off. In this work, the high accuracy standard current transformer and online operation method are the key techniques. Based on the clamp-shape iron-core coil and clamp-shape air-core coil, a combined clamp-shape coil is designed as the standard current transformer. By analyzing the output characteristics of the two coils, the combined clamp-shape coil can achieve verification of the accuracy. So the accuracy of the online calibration system can be guaranteed. Moreover, by employing the earth potential working method and using two insulating rods to connect the combined clamp-shape coil to the high voltage bus, the operation becomes simple and safe. Tests in China National Center for High Voltage Measurement and field experiments show that the proposed system has a high accuracy of up to 0.05 class.

76 FR 64975 - Proposed Collection; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-19

... examine in detail the nature of various employment and unemployment situations. II. Current Action Office... comments concerning the proposed new collection of the ``Current Population Survey (CPS) Disability... conducted at the request of the Department of Labor's Office of Disability Employment Policy. The Disability...

On-farm euthanasia practices and attitudes of commercial meat rabbit producers.

PubMed

Walsh, Jessica; Percival, Aaron; Tapscott, Brian; Turner, Patricia V

2017-09-16

Appropriate and timely on-farm euthanasia is the responsibility of the producer, working together with their herd veterinarian. Unfortunately, validated methods for euthanasia of commercial meat rabbits are lacking and there are few educational materials available for producer training. Because euthanasia must be performed in a timely fashion to minimise suffering, it is critical to ensure that methods used are aesthetic, humane and effective. We surveyed Canadian meat rabbit producers for current on-farm euthanasia practices as well as attitudes towards the methods they employed and thoughts on novel euthanasia techniques. Surveys were distributed with a response rate of 26 per cent (n=26). Blunt force trauma was the most common euthanasia method used (54 per cent), followed by assisted manual cervical dislocation (31 per cent). Half of producers admitted to not having a euthanasia method in place for all age groups of rabbits, instead electing to let sick and injured rabbits die on their own. While some producers reported feeling highly skilled and satisfied with their current euthanasia method, 58 per cent reported concerns with their current method and 42 per cent desired alternative methods to be developed. Responses to additional questions on training and awareness of euthanasia resources indicated that veterinarians are not part of on-farm euthanasia planning for meat rabbits. © British Veterinary Association (unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Cancer Localization in the Prostate with F-18 Fluorocholine Positron Emission Tomography

DTIC Science & Technology

2007-01-01

INTRODUCTION Prostate cancer is the second leading cause of cancer death in American men over 50 years of age. Ultrasound - guided prostate biopsy is...currently the most common method for diagnosing and localizing cancer in the prostate. However, even when standard 6 or 12 needle biopsy templates... needles employed (1, 2). While progress has been made in the detection of primary prostate cancer using imaging techniques such as ultrasound and

Reducing covert self-injurious behavior maintained by automatic reinforcement through a variable momentary DRO procedure.

PubMed

Toussaint, Karen A; Tiger, Jeffrey H

2012-01-01

Covert self-injurious behavior (i.e., behavior that occurs in the absence of other people) can be difficult to treat. Traditional treatments typically have involved sophisticated methods of observation and often have employed positive punishment procedures. The current study evaluated the effectiveness of a variable momentary differential reinforcement contingency in the treatment of covert self-injury. Neither positive punishment nor extinction was required to produce decreased skin picking.

Bridging the clinician/researcher gap with systemic research: the case for process research, dyadic, and sequential analysis.

PubMed

Oka, Megan; Whiting, Jason

2013-01-01

In Marriage and Family Therapy (MFT), as in many clinical disciplines, concern surfaces about the clinician/researcher gap. This gap includes a lack of accessible, practical research for clinicians. MFT clinical research often borrows from the medical tradition of randomized control trials, which typically use linear methods, or follow procedures distanced from "real-world" therapy. We review traditional research methods and their use in MFT and propose increased use of methods that are more systemic in nature and more applicable to MFTs: process research, dyadic data analysis, and sequential analysis. We will review current research employing these methods, as well as suggestions and directions for further research. © 2013 American Association for Marriage and Family Therapy.

[The comparative assessment of the practical value of the currently employed methods for the recognition and species specificity of the blood].

PubMed

Grezina, N Iu; Suleĭmenova, G M

2011-01-01

The objective of the present study was to evaluate sensitivity and specificity of the HemDirect method on test-plates (Seratec) for detecting human hemoglobin (HHb). These characteristics were compared with those of other widely used methods designed for the detection of blood traces, viz. thin layer chromatography, hemotest, spectrofluorimetry, and identification of blood species specificity (by countercurrent immunoelectrophoresis in agar and on the acetate-cellulose film). It was shown that the HemDirect test is highly specific and far more sensitive than other techniques used for the same purpose in the practical work. It can be recommended as the method of choice for the detection of blood microtraces.

The Costs and Benefits of Employing an Adult with Autism Spectrum Disorder: A Systematic Review

PubMed Central

2015-01-01

Background Despite an ambition from adults with Autism Spectrum Disorder (ASD) to be employed, there are limited opportunities for competitive employment for this group. Employment is not only an entitlement enjoyed by others in society, but employing adults with ASD also has economic benefits by decreasing lost productivity and resource costs for this group. Few studies have explored the cost-benefit ratio for employing adults with ASD and even fewer have taken the viewpoint of the employer, particularly applying this situation to ASD. Until such study occurs, employers may continue to be reluctant to employ adults from this group. Objective This review aimed to examine the costs, benefits and the cost-benefit ratio of employing adults with ASD, from a societal perspective and from the perspective of employers. Methods Eight databases were searched for scientific studies within defined inclusion criteria. These databases included CINAHL Plus, Cochrane Library, Emerald, Ovid Medline, ProQuest, PsycINFO, Scopus and Web of Science. Results and Conclusion Enhancing the opportunities for adults with ASD to join the workforce is beneficial from a societal perspective, not only from an inclusiveness viewpoint, but also from a strict economic standpoint. Providing supported employment services for adults with ASD does not only cut the cost compared with providing standard care, it also results in better outcomes for adults with ASD. Despite the fact that ASD was the most expensive group to provide vocational rehabilitation services for, adults with ASD have a strong chance of becoming employed once appropriate measures are in place. Hence, rehabilitation services could be considered as a worthwhile investment. The current systematic review uncovered the fact that very few studies have examined the benefits, the costs and the cost-benefit ratio of employing an adult with ASD from the perspective of employers indicating a need for this topic to be further explored. PMID:26445345

Assessing outcomes of industrial hygiene graduate education.

PubMed

Brosseau, Lisa; Fredrickson, Ann

2009-05-01

To ensure that industrial hygiene professionals continue to be prepared for current and future trends, it is important to regularly assess the value of their education. Described here are the results of discussions with employers and a mailed survey of graduates. Comparisons are made with past mailed surveys of both groups. Two sets of discussions were held in late 2005 with employers of industrial hygienists and other health and safety professionals. Twenty-eight participants were asked to discuss current and future needs for professionals in their organization and economic sector, their expectations for knowledge and skills when hiring professionals, methods for finding and hiring, and the importance of ABET accreditation. At the same time, a survey was mailed to 71 industrial hygiene students graduating in the last 15 years. Respondents were asked to rank the value of and their proficiency in 42 competencies. Questions also assessed employment experience, certification, the importance of ABET accreditation, and demographic characteristics. There was a lot of agreement between the two stakeholder groups (employers and graduates) about the most important skill and knowledge areas. Most employers identified communicating effectively and exposure assessment among the most important skills, with designing and initiating research as among the least. Hazard recognition, exposure measurement principles, and personal protective equipment were the most highly ranked knowledge areas. Employers discussed the need for good "business skills" such as teamwork, communication, and project management, and the importance of problem-solving skills. Graduates reported that skills in the areas of recognition, evaluation, and control were most valuable in their first jobs and generally reported high levels of proficiency in these skill areas. There was a similar dichotomy in opinions about accreditation within each stakeholder group. The reputation of the academic program was important when making hiring decisions; accreditation became an important factor only when a program's reputation was not known. Graduates strongly supported ongoing accreditation but did not apply or attend on the basis of accreditation.

Passive Smoking at Home by Socioeconomic Factors in a Japanese Population: NIPPON DATA2010

PubMed Central

Arima, Hisatomi; Fujiyoshi, Akira; Nakano, Yasutaka; Ohkubo, Takayoshi; Okayama, Akira

2018-01-01

Background Long-term passive exposure to cigarette smoke has been reported to affect the health of non-smokers. This study aims to investigate the relationships among socioeconomic factors and passive smoking at home in the non-current smokers of a representative sample from a general Japanese population. Methods Data are from NIPPON DATA2010. Among 2,891 participants, 2,288 non-current smokers (1,763 never smokers and 525 past smokers) were analyzed in the present study. Cross-sectional analyses were performed on the relationships among socioeconomic factors and passive smoking at home (several times a week or more) in men and women separately. Socioeconomic factors were employment, length of education, marital status, and equivalent household expenditure. Odds ratios (ORs) and 95% confidence intervals (CIs) were calculated using a multivariable logistic regression model. Results The multivariable-adjusted model showed that employed women had a higher risk of passive smoking than unemployed women (OR 1.44; 95% CI, 1.06–1.96). Women with 9 years or less of education had a higher risk of passive smoking at home than women with 13 years and more of education (OR 2.37; 95% CI, 1.49–3.78). Single women had a lower risk of passive smoking at home (OR 0.53; 95% CI, 0.37–0.77) than married women. No significant associations were observed in men. Conclusions An employed status, lower education, and being single were associated with passive smoking at home in the non-current smoking women of a representative Japanese population. PMID:29503385

Rapid Two-Millisecond Interrogation of Electrochemical, Aptamer-Based Sensor Response Using Intermittent Pulse Amperometry.

PubMed

Santos-Cancel, Mirelis; Lazenby, Robert A; White, Ryan J

2018-06-22

In this manuscript, we employ the technique intermittent pulse amperometry (IPA) to interrogate equilibrium and kinetic target binding to the surface of electrochemical, aptamer-based (E-AB) sensors, achieving as fast as 2 ms time resolution. E-AB sensors comprise an electrode surface modified with a flexible nucleic acid aptamer tethered at the 3'-terminus with a redox-active molecule. The introduction of a target changes the conformation and flexibility of the nucleic acid, which alters the charge transfer rate of the appended redox molecule. Typically, changes in charge transfer rate within this class of sensor are monitored via voltammetric methods. Here, we demonstrate that the use of IPA enables the detection of changes in charge transfer rates (i.e., current) at times <100 μs after the application of a potential pulse. Changes in sensor current are quantitatively related to target analyte concentration and can be used to create binding isotherms. Furthermore, the application of IPA enables rapid probing of the electrochemical surface with a time resolution equivalent to as low as twice the applied potential pulse width, not previously demonstrated with traditional voltammetric techniques employed with E-AB sensors (alternating current, square wave, cyclic). To visualize binding, we developed false-color plots analogous to those used in the field of fast-scan cyclic voltammetry. The use of IPA is universal, as demonstrated with two representative small molecule E-AB sensors directed against the aminoglycoside antibiotic tobramycin and adenosine triphosphate (ATP). Intermittent pulse amperometry exhibits an unprecedented sub-microsecond temporal response and is a general method for measuring rapid sensor performance.

Supporting Tablet Configuration, Tracking, and Infection Control Practices in Digital Health Interventions: Study Protocol

PubMed Central

Furberg, Robert D; Zulkiewicz, Brittany A; Hudson, Jordan P; Taylor, Olivia M; Lewis, Megan A

2016-01-01

Background Tablet-based health care interventions have the potential to encourage patient care in a timelier manner, allow physicians convenient access to patient records, and provide an improved method for patient education. However, along with the continued adoption of tablet technologies, there is a concomitant need to develop protocols focusing on the configuration, management, and maintenance of these devices within the health care setting to support the conduct of clinical research. Objective Develop three protocols to support tablet configuration, tablet management, and tablet maintenance. Methods The Configurator software, Tile technology, and current infection control recommendations were employed to develop three distinct protocols for tablet-based digital health interventions. Configurator is a mobile device management software specifically for iPhone operating system (iOS) devices. The capabilities and current applications of Configurator were reviewed and used to develop the protocol to support device configuration. Tile is a tracking tag associated with a free mobile app available for iOS and Android devices. The features associated with Tile were evaluated and used to develop the Tile protocol to support tablet management. Furthermore, current recommendations on preventing health care–related infections were reviewed to develop the infection control protocol to support tablet maintenance. Results This article provides three protocols: the Configurator protocol, the Tile protocol, and the infection control protocol. Conclusions These protocols can help to ensure consistent implementation of tablet-based interventions, enhance fidelity when employing tablets for research purposes, and serve as a guide for tablet deployments within clinical settings. PMID:27350013

Eddy Current Sensing of Torque in Rotating Shafts

NASA Astrophysics Data System (ADS)

Varonis, Orestes J.; Ida, Nathan

2013-12-01

The noncontact torque sensing in machine shafts is addressed based on the stress induced in a press-fitted magnetoelastic sleeve on the shaft and eddy current sensing of the changes of electrical conductivity and magnetic permeability due to the presence of stress. The eddy current probe uses dual drive, dual sensing coils whose purpose is increased sensitivity to torque and decreased sensitivity to variations in distance between probe and shaft (liftoff). A mechanism of keeping the distance constant is also employed. Both the probe and the magnetoelastic sleeve are evaluated for performance using a standard eddy current instrument. An eddy current instrument is also used to drive the coils and analyze the torque data. The method and sensor described are general and adaptable to a variety of applications. The sensor is suitable for static and rotating shafts, is independent of shaft diameter and operational over a large range of torques. The torque sensor uses a differential eddy current measurement resulting in cancellation of common mode effects including temperature and vibrations.

Direct measurements of the atmospheric conduction current

NASA Technical Reports Server (NTRS)

Burke, H. K.; Few, A. A.

1978-01-01

A method of measuring the atmospheric conduction current above the ground has been employed to obtain data for 12 weeks during the first half of 1974. The instrument consists of a split aluminum sphere suspended by insulated wires to a wooden frame. The measuring electronics and the transmitter are enclosed within the spherical structure. The interaction of the instrument with its atmospheric electrical environment is analyzed, and it is shown that in steady state conditions, predictable differences in the instrumentally measured currents and the atmospheric conduction current will be less than 5% and in the nonsteady state situations the difference is less than 20%. Diurnal variations, a probable winter-summer variation, sunrise, and fog effects were observed for the data obtained during fair-weather conditions. Disturbed weather data are interpreted for the effects of low clouds on the atmospheric current. The charge concentrations within overcast clouds sufficient to produce the observed reversed atmospheric currents are estimated to be small in relation to values in thunderclouds.

28 CFR 4.4 - Supporting affidavit; additional information.

Code of Federal Regulations, 2010 CFR

2010-07-01

... relatives by blood or marriage are currently serving in any capacity with any employee benefit plan, or labor organization, group or association of employers dealing with labor organizations or industrial labor relations group, or currently advising or representing any employer with respect to employee...

Adaptive methods for nonlinear structural dynamics and crashworthiness analysis

NASA Technical Reports Server (NTRS)

Belytschko, Ted

1993-01-01

The objective is to describe three research thrusts in crashworthiness analysis: adaptivity; mixed time integration, or subcycling, in which different timesteps are used for different parts of the mesh in explicit methods; and methods for contact-impact which are highly vectorizable. The techniques are being developed to improve the accuracy of calculations, ease-of-use of crashworthiness programs, and the speed of calculations. The latter is still of importance because crashworthiness calculations are often made with models of 20,000 to 50,000 elements using explicit time integration and require on the order of 20 to 100 hours on current supercomputers. The methodologies are briefly reviewed and then some example calculations employing these methods are described. The methods are also of value to other nonlinear transient computations.

A Large-Scale Study of Fingerprint Matching Systems for Sensor Interoperability Problem

PubMed Central

Hussain, Muhammad; AboAlSamh, Hatim; AlZuair, Mansour

2018-01-01

The fingerprint is a commonly used biometric modality that is widely employed for authentication by law enforcement agencies and commercial applications. The designs of existing fingerprint matching methods are based on the hypothesis that the same sensor is used to capture fingerprints during enrollment and verification. Advances in fingerprint sensor technology have raised the question about the usability of current methods when different sensors are employed for enrollment and verification; this is a fingerprint sensor interoperability problem. To provide insight into this problem and assess the status of state-of-the-art matching methods to tackle this problem, we first analyze the characteristics of fingerprints captured with different sensors, which makes cross-sensor matching a challenging problem. We demonstrate the importance of fingerprint enhancement methods for cross-sensor matching. Finally, we conduct a comparative study of state-of-the-art fingerprint recognition methods and provide insight into their abilities to address this problem. We performed experiments using a public database (FingerPass) that contains nine datasets captured with different sensors. We analyzed the effects of different sensors and found that cross-sensor matching performance deteriorates when different sensors are used for enrollment and verification. In view of our analysis, we propose future research directions for this problem. PMID:29597286

Application of virtual reality methods to obesity prevention and management research.

PubMed

Persky, Susan

2011-03-01

There is a great need for empirical evidence to inform clinical prevention and management of overweight and obesity. Application of virtual reality (VR) methods to this research agenda could present considerable advantages. Use of VR methods in basic and applied obesity prevention and treatment research is currently extremely limited. However, VR has been employed for social and behavioral research in many other domains where it has demonstrated validity and utility. Advantages of VR technologies as research tools include the ability to situate hypothetical research scenarios in realistic settings, tight experimental control inherent in virtual environments, the ability to manipulate and control any and all scenario elements, and enhanced behavioral measurement opportunities. The means by which each of these features could enhance obesity prevention and management research is discussed and illustrated in the context of an example research study. Challenges associated with the application of VR methods, such as technological limitations and cost, are also considered. By employing experimental VR methods to interrogate clinical encounters and other health-related situations, researchers may be able to elucidate causal relationships, strengthen theoretical models, and identify potential targets for intervention. In so doing, researchers stand to make important contributions to evidence-based practice innovation in weight management and obesity prevention. © 2011 Diabetes Technology Society.

A Large-Scale Study of Fingerprint Matching Systems for Sensor Interoperability Problem.

PubMed

AlShehri, Helala; Hussain, Muhammad; AboAlSamh, Hatim; AlZuair, Mansour

2018-03-28

The fingerprint is a commonly used biometric modality that is widely employed for authentication by law enforcement agencies and commercial applications. The designs of existing fingerprint matching methods are based on the hypothesis that the same sensor is used to capture fingerprints during enrollment and verification. Advances in fingerprint sensor technology have raised the question about the usability of current methods when different sensors are employed for enrollment and verification; this is a fingerprint sensor interoperability problem. To provide insight into this problem and assess the status of state-of-the-art matching methods to tackle this problem, we first analyze the characteristics of fingerprints captured with different sensors, which makes cross-sensor matching a challenging problem. We demonstrate the importance of fingerprint enhancement methods for cross-sensor matching. Finally, we conduct a comparative study of state-of-the-art fingerprint recognition methods and provide insight into their abilities to address this problem. We performed experiments using a public database (FingerPass) that contains nine datasets captured with different sensors. We analyzed the effects of different sensors and found that cross-sensor matching performance deteriorates when different sensors are used for enrollment and verification. In view of our analysis, we propose future research directions for this problem.

Application of Virtual Reality Methods to Obesity Prevention and Management Research

PubMed Central

Persky, Susan

2011-01-01

There is a great need for empirical evidence to inform clinical prevention and management of overweight and obesity. Application of virtual reality (VR) methods to this research agenda could present considerable advantages. Use of VR methods in basic and applied obesity prevention and treatment research is currently extremely limited. However, VR has been employed for social and behavioral research in many other domains where it has demonstrated validity and utility. Advantages of VR technologies as research tools include the ability to situate hypothetical research scenarios in realistic settings, tight experimental control inherent in virtual environments, the ability to manipulate and control any and all scenario elements, and enhanced behavioral measurement opportunities. The means by which each of these features could enhance obesity prevention and management research is discussed and illustrated in the context of an example research study. Challenges associated with the application of VR methods, such as technological limitations and cost, are also considered. By employing experimental VR methods to interrogate clinical encounters and other health-related situations, researchers may be able to elucidate causal relationships, strengthen theoretical models, and identify potential targets for intervention. In so doing, researchers stand to make important contributions to evidence-based practice innovation in weight management and obesity prevention. PMID:21527102

Sachem: a chemical cartridge for high-performance substructure search.

PubMed

Kratochvíl, Miroslav; Vondrášek, Jiří; Galgonek, Jakub

2018-05-23

Structure search is one of the valuable capabilities of small-molecule databases. Fingerprint-based screening methods are usually employed to enhance the search performance by reducing the number of calls to the verification procedure. In substructure search, fingerprints are designed to capture important structural aspects of the molecule to aid the decision about whether the molecule contains a given substructure. Currently available cartridges typically provide acceptable search performance for processing user queries, but do not scale satisfactorily with dataset size. We present Sachem, a new open-source chemical cartridge that implements two substructure search methods: The first is a performance-oriented reimplementation of substructure indexing based on the OrChem fingerprint, and the second is a novel method that employs newly designed fingerprints stored in inverted indices. We assessed the performance of both methods on small, medium, and large datasets containing 1, 10, and 94 million compounds, respectively. Comparison of Sachem with other freely available cartridges revealed improvements in overall performance, scaling potential and screen-out efficiency. The Sachem cartridge allows efficient substructure searches in databases of all sizes. The sublinear performance scaling of the second method and the ability to efficiently query large amounts of pre-extracted information may together open the door to new applications for substructure searches.

Towards the Solution of the Many-Electron Problem in Real Materials: Equation of State of the Hydrogen Chain with State-of-the-Art Many-Body Methods

DOE PAGES

Motta, Mario; Ceperley, David M.; Chan, Garnet Kin-Lic; ...

2017-09-28

We present numerical results for the equation of state of an infinite chain of hydrogen atoms. A variety of modern many-body methods are employed, with exhaustive cross-checks and validation. Approaches for reaching the continuous space limit and the thermodynamic limit are investigated, proposed, and tested. The detailed comparisons provide a benchmark for assessing the current state of the art in many-body computation, and for the development of new methods. The ground-state energy per atom in the linear chain is accurately determined versus bond length, with a confidence bound given on all uncertainties.

Transport Coefficients from Large Deviation Functions

NASA Astrophysics Data System (ADS)

Gao, Chloe; Limmer, David

2017-10-01

We describe a method for computing transport coefficients from the direct evaluation of large deviation function. This method is general, relying on only equilibrium fluctuations, and is statistically efficient, employing trajectory based importance sampling. Equilibrium fluctuations of molecular currents are characterized by their large deviation functions, which is a scaled cumulant generating function analogous to the free energy. A diffusion Monte Carlo algorithm is used to evaluate the large deviation functions, from which arbitrary transport coefficients are derivable. We find significant statistical improvement over traditional Green-Kubo based calculations. The systematic and statistical errors of this method are analyzed in the context of specific transport coefficient calculations, including the shear viscosity, interfacial friction coefficient, and thermal conductivity.

Parallel excitation-emission multiplexed fluorescence lifetime confocal microscopy for live cell imaging.

PubMed

Zhao, Ming; Li, Yu; Peng, Leilei

2014-05-05

We present a novel excitation-emission multiplexed fluorescence lifetime microscopy (FLIM) method that surpasses current FLIM techniques in multiplexing capability. The method employs Fourier multiplexing to simultaneously acquire confocal fluorescence lifetime images of multiple excitation wavelength and emission color combinations at 44,000 pixels/sec. The system is built with low-cost CW laser sources and standard PMTs with versatile spectral configuration, which can be implemented as an add-on to commercial confocal microscopes. The Fourier lifetime confocal method allows fast multiplexed FLIM imaging, which makes it possible to monitor multiple biological processes in live cells. The low cost and compatibility with commercial systems could also make multiplexed FLIM more accessible to biological research community.

Allocating Practice Expense Under the Medicare Fee Schedule

PubMed Central

Pope, Gregory C.; Burge, Russel T.

1993-01-01

Currently, relative value units for practice expense are determined under the Medicare fee schedule (MFS) using historical physician charges. This seems inconsistent with the goal of a resource-based fee schedule. A specialty resource-based method of determining practice expense payments is presented and simulated here. The method assumes that, for each service, the payment for practice expense should be the same proportion of the total payment as actual physician practice expenses are of total practice revenues. A comparison with the approach developed by the Physician Payment Review Commission (PPRC) shows similar fees, but the specialty-based method proposed here requires no data beyond what is already employed in the MFS. PMID:10130574

A Discontinuous Galerkin Method for Parabolic Problems with Modified hp-Finite Element Approximation Technique

NASA Technical Reports Server (NTRS)

Kaneko, Hideaki; Bey, Kim S.; Hou, Gene J. W.

2004-01-01

A recent paper is generalized to a case where the spatial region is taken in R(sup 3). The region is assumed to be a thin body, such as a panel on the wing or fuselage of an aerospace vehicle. The traditional h- as well as hp-finite element methods are applied to the surface defined in the x - y variables, while, through the thickness, the technique of the p-element is employed. Time and spatial discretization scheme based upon an assumption of certain weak singularity of double vertical line u(sub t) double vertical line 2, is used to derive an optimal a priori error estimate for the current method.

Transistors using crystalline silicon devices on glass

DOEpatents

McCarthy, A.M.

1995-05-09

A method is disclosed for fabricating transistors using single-crystal silicon devices on glass. This method overcomes the potential damage that may be caused to the device during high voltage bonding and employs a metal layer which may be incorporated as part of the transistor. This is accomplished such that when the bonding of the silicon wafer or substrate to the glass substrate is performed, the voltage and current pass through areas where transistors will not be fabricated. After removal of the silicon substrate, further metal may be deposited to form electrical contact or add functionality to the devices. By this method both single and gate-all-around devices may be formed. 13 figs.

Towards the Solution of the Many-Electron Problem in Real Materials: Equation of State of the Hydrogen Chain with State-of-the-Art Many-Body Methods

DOE Office of Scientific and Technical Information (OSTI.GOV)

Motta, Mario; Ceperley, David M.; Chan, Garnet Kin-Lic

We present numerical results for the equation of state of an infinite chain of hydrogen atoms. A variety of modern many-body methods are employed, with exhaustive cross-checks and validation. Approaches for reaching the continuous space limit and the thermodynamic limit are investigated, proposed, and tested. The detailed comparisons provide a benchmark for assessing the current state of the art in many-body computation, and for the development of new methods. The ground-state energy per atom in the linear chain is accurately determined versus bond length, with a confidence bound given on all uncertainties.

Preliminary Method for Direct Quantification of Colistin Methanesulfonate by Attenuated Total Reflectance Fourier Transform Infrared Spectroscopy

PubMed Central

Niece, Krista L.

2015-01-01

Colistin use has increased in response to the advent of infections caused by multidrug-resistant organisms. It is administered parenterally as an inactive prodrug, colistin methanesulfonate (CMS). Various formulations of CMS and labeling conventions can lead to confusion about colistin dosing, and questions remain about the pharmacokinetics of CMS. Since CMS does not have strong UV absorbance, current methods employ a laborious process of chemical conversion to colistin followed by precolumn derivatization to detect formed colistin by high-performance liquid chromatography. Here, we report a method for direct quantification of colistin methanesulfonate by attenuated total reflectance Fourier transform infrared spectroscopy (ATR FTIR). PMID:26124160

Design of Intelligent Hydraulic Excavator Control System Based on PID Method

NASA Astrophysics Data System (ADS)

Zhang, Jun; Jiao, Shengjie; Liao, Xiaoming; Yin, Penglong; Wang, Yulin; Si, Kuimao; Zhang, Yi; Gu, Hairong

Most of the domestic designed hydraulic excavators adopt the constant power design method and set 85%~90% of engine power as the hydraulic system adoption power, it causes high energy loss due to mismatching of power between the engine and the pump. While the variation of the rotational speed of engine could sense the power shift of the load, it provides a new method to adjust the power matching between engine and pump through engine speed. Based on negative flux hydraulic system, an intelligent hydraulic excavator control system was designed based on rotational speed sensing method to improve energy efficiency. The control system was consisted of engine control module, pump power adjusted module, engine idle module and system fault diagnosis module. Special PLC with CAN bus was used to acquired the sensors and adjusts the pump absorption power according to load variation. Four energy saving control strategies with constant power method were employed to improve the fuel utilization. Three power modes (H, S and L mode) were designed to meet different working status; Auto idle function was employed to save energy through two work status detected pressure switches, 1300rpm was setting as the idle speed according to the engine consumption fuel curve. Transient overload function was designed for deep digging within short time without spending extra fuel. An increasing PID method was employed to realize power matching between engine and pump, the rotational speed's variation was taken as the PID algorithm's input; the current of proportional valve of variable displacement pump was the PID's output. The result indicated that the auto idle could decrease fuel consumption by 33.33% compared to work in maximum speed of H mode, the PID control method could take full use of maximum engine power at each power mode and keep the engine speed at stable range. Application of rotational speed sensing method provides a reliable method to improve the excavator's energy efficiency and realize power match between pump and engine.

Employment in Adults with Down Syndrome in the United States: Results from a National Survey.

PubMed

Kumin, Libby; Schoenbrodt, Lisa

2016-07-01

There is no current data about employment/unemployment of adults with Down syndrome in the United States. The data that exists includes adults with Down syndrome as part of the larger group of people with disabilities or people with intellectual disability. This study used a survey to investigate paid and volunteer employment, unemployment, types of jobs, job training, job settings, job schedules and job satisfaction in adults with Down syndrome. There were 511 survey responses received. Findings were that there is high unemployment for adults with Down syndrome and that current employment is in a limited number of fields, primarily in the areas of food, janitorial work, landscaping, and office work. A small percentage of respondents have full time paid employment. A combination of part time paid employment and unpaid volunteer work is typical. Implications for educators, counselors, legislators and employers are discussed. © 2015 John Wiley & Sons Ltd.

AIDS: An Employer's Dilemma.

ERIC Educational Resources Information Center

Letchinger, Robert S.

1986-01-01

How should employers respond to applicants and employees with AIDS-related conditions, and how do they resolve employment problems arising from those situations? This article provides some guidance for employers who are currently facing these questions. Discusses legal ramifications, employee attitudes, cost-related considerations, and health…

Employment-based health insurance: a look at tax issues and public opinion.

PubMed

Fronstin, P

1999-07-01

This Issue Brief provides background information on the employment-based health insurance system and its alternatives. The report discusses the advantages and disadvantages of the current employment-based health insurance system, the current tax treatment of health insurance, and the strength and weaknesses of recent proposals to introduce tax credits. It presents findings from the public opinion survey conducted by the Employee Benefit Research Institute on public attitudes toward health insurance and summarizes recent research on the effects of tax changes on employment-based health benefits and the uninsured. Employment-based health plans are the most common source of health insurance among nonelderly individuals in the United States, providing coverage to nearly two-thirds of this population in 1997. Health insurance is probably the benefit most used and valued by workers and their families. Sixty-four percent of respondents to a recent survey rated employment-based health insurance benefits as the most important benefit. Despite essentially five years of very low health care cost increases and the recent increase in the percentage of Americans with employment-based health insurance coverage, the uninsured population has continued to rise. This has resulted in a new interest among policymakers in finding ways to reverse this trend. One question that continues to be asked is whether the employment-based health insurance system is the appropriate mechanism for expanding health insurance to the uninsured. Employment-based health plans are popular because they offer many advantages over other forms of health insurance and types of delivery systems. However, there are also potential drawbacks to the employment-based system. The advantages include reduced risk of adverse selection, group-purchasing efficiencies, employers acting as a workers' advocate, delivery innovation, and health care quality. The disadvantages include an unfair tax treatment, lack of portability and job lock, little choice of health plans, and lack of universal coverage. The tax credit proposals for health insurance, which come in all shapes and sizes, would either enhance the current employment-based health insurance system or put it at risk. This has potentially enormous public policy implications, since the vast majority of Americans get their health insurance coverage through employers. Such a change may also have political implications, as public opinion currently may not support such a fundamental change in the U.S. health insurance system. A recent public opinion survey conducted by the Employee Benefit Research Institute found that 68 percent of Americans with employment-based health insurance were satisfied with the current mix of benefits and wages. The EBRI survey found that under a changing tax code scenario, there is still strong support for the employment-based system. Strong support for the employment-based system may be the result of respondents' lack of confidence in their ability to choose the best health plan if their employer stopped offering health insurance.

Why Is the Overheating Problem Difficult: the Role of Entropy

NASA Technical Reports Server (NTRS)

Liou, Meng-Sing

2013-01-01

The development of computational fluid dynamics over the last few decades has yielded enormous successes and capabilities being routinely employed today; however there remain some open problems to be properly resolved-some are fundamental in nature and some resolvable by operational changes. These two categories are distinguished and broadly explored previously. One, that belongs to the former, is the so-called overheating problem, especially in rarefying flow. This problem up to date still dogs every method known to the author; a solution to it remains elusive. The study in this paper concludes that: (1) the entropy increase is quantitatively linked to the increase in the temperature increase, (2) it is argued that the overheating is inevitable in the current shock capturing or traditional finite difference framework, and (3) a simple hybrid method is proposed that removes the overheating problem in the rarefying problems, but also retains the property of accurate shock capturing. This remedy (enhancement of current numerical methods) can be included easily in the present Eulerian codes.

Quantification of Microbial Phenotypes

PubMed Central

Martínez, Verónica S.; Krömer, Jens O.

2016-01-01

Metabolite profiling technologies have improved to generate close to quantitative metabolomics data, which can be employed to quantitatively describe the metabolic phenotype of an organism. Here, we review the current technologies available for quantitative metabolomics, present their advantages and drawbacks, and the current challenges to generate fully quantitative metabolomics data. Metabolomics data can be integrated into metabolic networks using thermodynamic principles to constrain the directionality of reactions. Here we explain how to estimate Gibbs energy under physiological conditions, including examples of the estimations, and the different methods for thermodynamics-based network analysis. The fundamentals of the methods and how to perform the analyses are described. Finally, an example applying quantitative metabolomics to a yeast model by 13C fluxomics and thermodynamics-based network analysis is presented. The example shows that (1) these two methods are complementary to each other; and (2) there is a need to take into account Gibbs energy errors. Better estimations of metabolic phenotypes will be obtained when further constraints are included in the analysis. PMID:27941694

Chromatographic fingerprinting through chemometric techniques for herbal slimming pills: A way of adulterant identification.

PubMed

Shekari, Nafiseh; Vosough, Maryam; Tabar Heidar, Kourosh

2018-05-01

In the current study, gas chromatography-mass spectrometry (GC-MS) fingerprinting of herbal slimming pills assisted by chemometric methods has been presented. Deconvolution of two-way chromatographic signals of nine herbal slimming pills into pure chromatographic and spectral patterns was performed. The peak clusters were resolved using multivariate curve resolution-alternating least squares (MCR-ALS) by employing appropriate constraints. It was revealed that more useful chemical information about the composition of the slimming pills can be obtained by employing sophisticated GC-MS method coupled with proper chemometric tools yielding the extended number of identified constituents. The thorough fingerprinting of the complex mixtures proved the presence of some toxic or carcinogen components, such as toluene, furfural, furfuryl alcohol, styrene, itaconic anhydride, citraconic anhydride, trimethyl phosphate, phenol, pyrocatechol, p-propenylanisole and pyrogallol. In addition, some samples were shown to be adulterated with undeclared ingredients, including stimulants, anorexiant and laxatives such as phenolphthalein, amfepramone, caffeine and sibutramine. Copyright © 2018 Elsevier B.V. All rights reserved.

Photocatalytic disinfection of surfaces with copper doped Ti02 nanotube coatings illuminated by ceiling mounted fluorescent light

PubMed Central

Koklic, Tilen; Pintarič, Štefan; Zdovc, Irena; Golob, Majda; Umek, Polona; Mehle, Alma; Dobeic, Martin; Štrancar, Janez

2018-01-01

High economic burden is associated with foodborne illnesses. Different disinfection methods are therefore employed in food processing industry; such as use of ultraviolet light or usage of surfaces with copper-containing alloys. However, all the disinfection methods currently in use have some shortcomings. In this work we show that copper doped TiO2 nanotubes deposited on existing surfaces and illuminated with ceiling mounted fluorescent lights can retard the growth of Listeria Innocua by 80% in seven hours of exposure to the fluorescent lights at different places in a food processing plant or in the laboratory conditions with daily reinocuation and washing. The disinfection properties of the surfaces seem to depend mainly on the temperature difference of the surface and the dew point, where for the maximum effectiveness the difference should be about 3 degrees celsius. The TiO2 nanotubes have a potential to be employed for an economical and continuous disinfection of surfaces. PMID:29768464

Photocatalytic disinfection of surfaces with copper doped Ti02 nanotube coatings illuminated by ceiling mounted fluorescent light.

PubMed

Koklic, Tilen; Pintarič, Štefan; Zdovc, Irena; Golob, Majda; Umek, Polona; Mehle, Alma; Dobeic, Martin; Štrancar, Janez

2018-01-01

High economic burden is associated with foodborne illnesses. Different disinfection methods are therefore employed in food processing industry; such as use of ultraviolet light or usage of surfaces with copper-containing alloys. However, all the disinfection methods currently in use have some shortcomings. In this work we show that copper doped TiO2 nanotubes deposited on existing surfaces and illuminated with ceiling mounted fluorescent lights can retard the growth of Listeria Innocua by 80% in seven hours of exposure to the fluorescent lights at different places in a food processing plant or in the laboratory conditions with daily reinocuation and washing. The disinfection properties of the surfaces seem to depend mainly on the temperature difference of the surface and the dew point, where for the maximum effectiveness the difference should be about 3 degrees celsius. The TiO2 nanotubes have a potential to be employed for an economical and continuous disinfection of surfaces.

Enhanced High Performance Power Compensation Methodology by IPFC Using PIGBT-IDVR

PubMed Central

Arumugom, Subramanian; Rajaram, Marimuthu

2015-01-01

Currently, power systems are involuntarily controlled without high speed control and are frequently initiated, therefore resulting in a slow process when compared with static electronic devices. Among various power interruptions in power supply systems, voltage dips play a central role in causing disruption. The dynamic voltage restorer (DVR) is a process based on voltage control that compensates for line transients in the distributed system. To overcome these issues and to achieve a higher speed, a new methodology called the Parallel IGBT-Based Interline Dynamic Voltage Restorer (PIGBT-IDVR) method has been proposed, which mainly spotlights the dynamic processing of energy reloads in common dc-linked energy storage with less adaptive transition. The interline power flow controller (IPFC) scheme has been employed to manage the power transmission between the lines and the restorer method for controlling the reactive power in the individual lines. By employing the proposed methodology, the failure of a distributed system has been avoided and provides better performance than the existing methodologies. PMID:26613101

Thermal management of a Li-ion battery pack employing water evaporation

NASA Astrophysics Data System (ADS)

Ren, Yonghuan; Yu, Ziqun; Song, Guangji

2017-08-01

Battery thermal management (BTM) system plays a key part in vehicle thermal safety. A novel method employing water evaporation is presented in this paper. The thin sodium alginate film (SA-1 film) with water content of 99 wt% is prepared using a simple spraying method, and is attached on the surface of battery pack to explore its effectiveness on preventing heat accumulation. The result shows that under the condition with constant current charge/discharge larger than 1 C, the temperature rise rate is reduced by half. Under the condition with the New Europe Drive Cycle, the temperature could maintain stable without obvious rise. Moreover, a simple water automatic-refilling system is designed to address the dry issue of the film in terms of evaporation elimination. The proposed SA-1 film BTM system shows to be a very convenient and efficient approach in handling the thermal surge of Li-ion batteries without any change in battery pack integration and assembly.

ROS1-1.

PubMed

Pal, Prodipto; Khan, Zanobia

2017-12-01

ROS1 is a receptor tyrosine kinase that has recently been shown to undergo gene rearrangements in~1%-2% of non-small cell lung carcinoma (NSCLC) and in a variety of other tumours including cholangiocarcinoma, gastric carcinoma, colorectal carcinoma and in spitzoid neoplasms, glioblastoma and inflammatory myofibroblastic tumours. The ROS1 gene fusion undergoes constitutive activation, regulates cellular proliferation and is implicated in carcinogenesis. ROS1 fusions can be detected by fluorescence in situ hybridisation, real-time PCR, sequencing-based techniques and immunohistochemistry-based methods in clinical laboratories. The small molecule tyrosine kinase inhibitor, crizotinib has been shown to be an effective inhibitor of ROS1 and has received Food and Drug Administration approval for treatment of advanced NSCLC. The current review is an update on the clinical findings and detection methods of ROS1 in clinical laboratories in NSCLC and other tumours. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

The burden of cancer attributable to modifiable risk factors: the Australian cancer-PAF cohort consortium.

PubMed

Arriaga, Maria E; Vajdic, Claire M; Canfell, Karen; MacInnis, Robert; Hull, Peter; Magliano, Dianna J; Banks, Emily; Giles, Graham G; Cumming, Robert G; Byles, Julie E; Taylor, Anne W; Shaw, Jonathan E; Price, Kay; Hirani, Vasant; Mitchell, Paul; Adelstein, Barbara-Ann; Laaksonen, Maarit A

2017-06-14

To estimate the Australian cancer burden attributable to lifestyle-related risk factors and their combinations using a novel population attributable fraction (PAF) method that accounts for competing risk of death, risk factor interdependence and statistical uncertainty. 365 173 adults from seven Australian cohort studies. We linked pooled harmonised individual participant cohort data with population-based cancer and death registries to estimate exposure-cancer and exposure-death associations. Current Australian exposure prevalence was estimated from representative external sources. To illustrate the utility of the new PAF method, we calculated fractions of cancers causally related to body fatness or both tobacco and alcohol consumption avoidable in the next 10 years by risk factor modifications, comparing them with fractions produced by traditional PAF methods. Over 10 years of follow-up, we observed 27 483 incident cancers and 22 078 deaths. Of cancers related to body fatness (n=9258), 13% (95% CI 11% to 16%) could be avoided if those currently overweight or obese had body mass index of 18.5-24.9 kg/m 2 . Of cancers causally related to both tobacco and alcohol (n=4283), current or former smoking explains 13% (11% to 16%) and consuming more than two alcoholic drinks per day explains 6% (5% to 8%). The two factors combined explain 16% (13% to 19%): 26% (21% to 30%) in men and 8% (4% to 11%) in women. Corresponding estimates using the traditional PAF method were 20%, 31% and 10%. Our PAF estimates translate to 74 000 avoidable body fatness-related cancers and 40 000 avoidable tobacco- and alcohol-related cancers in Australia over the next 10 years (2017-2026). Traditional PAF methods not accounting for competing risk of death and interdependence of risk factors may overestimate PAFs and avoidable cancers. We will rank the most important causal factors and their combinations for a spectrum of cancers and inform cancer control activities. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

The prevalence of and factors associated with current smoking among College of Health Sciences students, Mekelle University in northern Ethiopia.

PubMed

Eticha, Tadele; Kidane, Feven

2014-01-01

Tobacco smoking is one of the greatest causes of preventable morbidity and mortality globally, and is responsible for many causes of untimely deaths. This survey was aimed to determine prevalence and factors associated with current smoking among the students of College of Health Sciences, Mekelle University, Ethiopia. A cross-sectional study was employed using a structured self-administered questionnaire among College of Health Sciences students in March 2013. A stratified random sampling method was employed to select study participants. Data were entered and analysed using of Statistical Package for Social Sciences (SPSS) version 20.0. Of the 193 students, 57 (29.5%) of the students were current smokers. Most of the current smokers (89.4%) smoked between 1-10 sticks of cigarette per day. The two main reasons cited for smoking cigarettes were peer pressure (43.9%) and to relieve stress (36.8%). Being female (adjusted OR [AOR] = 0.49; 95% CI: 0.25, 0.95) and Tigre by ethnicity (AOR = 0.32; 95% CI: 0.14, 0.74) were significantly less associated with current smoking. On the other hand, being second year students (AOR = 3.84; 95% CI: 1.41, 10.46), khat chewing (AOR = 8.36; 95% CI: 2.60, 26.85) and taking illicit drugs (AOR = 10.59; 95% CI: 2.77, 40.51) were positively associated with current smoking cigarettes. The current smoking prevalence among students in College of Health Sciences, Mekelle University is high and therefore, effective smoking prevention and cessation intervention programs are required to reduce smoking among university students.

The theory of an auto-resonant field emission cathode relativistic electron accelerator for high efficiency microwave to direct current power conversion

NASA Technical Reports Server (NTRS)

Manning, Robert M.

1990-01-01

A novel method of microwave power conversion to direct current is discussed that relies on a modification of well known resonant linear relativistic electron accelerator techniques. An analysis is presented that shows how, by establishing a 'slow' electromagnetic field in a waveguide, electrons liberated from an array of field emission cathodes, are resonantly accelerated to several times their rest energy, thus establishing an electric current over a large potential difference. Such an approach is not limited to the relatively low frequencies that characterize the operation of rectennas, and can, with appropriate waveguide and slow wave structure design, be employed in the 300 to 600 GHz range where much smaller transmitting and receiving antennas are needed.

High resolution SAW elastography for ex-vivo porcine skin specimen

NASA Astrophysics Data System (ADS)

Zhou, Kanheng; Feng, Kairui; Wang, Mingkai; Jamera, Tanatswa; Li, Chunhui; Huang, Zhihong

2018-02-01

Surface acoustic wave (SAW) elastography has been proven to be a non-invasive, non-destructive method for accurately characterizing tissue elastic properties. Current SAW elastography technique tracks generated surface acoustic wave impulse point by point which are a few millimeters away. Thus, reconstructed elastography has low lateral resolution. To improve the lateral resolution of current SAW elastography, a new method was proposed in this research. A M-B scan mode, high spatial resolution phase sensitive optical coherence tomography (PhS-OCT) system was employed to track the ultrasonically induced SAW impulse. Ex-vivo porcine skin specimen was tested using this proposed method. A 2D fast Fourier transform based algorithm was applied to process the acquired data for estimating the surface acoustic wave dispersion curve and its corresponding penetration depth. Then, the ex-vivo porcine skin elastogram was established by relating the surface acoustic wave dispersion curve and its corresponding penetration depth. The result from the proposed method shows higher lateral resolution than that from current SAW elastography technique, and the approximated skin elastogram could also distinguish the different layers in the skin specimen, i.e. epidermis, dermis and fat layer. This proposed SAW elastography technique may have a large potential to be widely applied in clinical use for skin disease diagnosis and treatment monitoring.

Intelligent voltage control strategy for three-phase UPS inverters with output LC filter

NASA Astrophysics Data System (ADS)

Jung, J. W.; Leu, V. Q.; Dang, D. Q.; Do, T. D.; Mwasilu, F.; Choi, H. H.

2015-08-01

This paper presents a supervisory fuzzy neural network control (SFNNC) method for a three-phase inverter of uninterruptible power supplies (UPSs). The proposed voltage controller is comprised of a fuzzy neural network control (FNNC) term and a supervisory control term. The FNNC term is deliberately employed to estimate the uncertain terms, and the supervisory control term is designed based on the sliding mode technique to stabilise the system dynamic errors. To improve the learning capability, the FNNC term incorporates an online parameter training methodology, using the gradient descent method and Lyapunov stability theory. Besides, a linear load current observer that estimates the load currents is used to exclude the load current sensors. The proposed SFNN controller and the observer are robust to the filter inductance variations, and their stability analyses are described in detail. The experimental results obtained on a prototype UPS test bed with a TMS320F28335 DSP are presented to validate the feasibility of the proposed scheme. Verification results demonstrate that the proposed control strategy can achieve smaller steady-state error and lower total harmonic distortion when subjected to nonlinear or unbalanced loads compared to the conventional sliding mode control method.

Depression and Behavioral Problems Among Adolescent Girls and Young Women Employees of the Textile Industry in India.

PubMed

Gnanaselvam, Nancy Angeline; Joseph, Bobby

2018-01-01

Stress and depression are common in textile industry employees due to inadequate working conditions and challenging socioeconomic conditions. The objective of the study was to assess depression and mental health among adolescent and young females currently employed in a textile factory located in Tamil Nadu compared with past employees and women who have never been employed. This cross-sectional study included a total of 107 participants in each study group who were interviewed. The Patient Health Questionnaire-9 and Strengths and Difficulties Questionnaire were administered to screen participants for depression and mental health. More current employees (16.82%) and past employees (15.88%) suffered from depression severe enough to require treatment compared with never employed girls and young women (2.8%). Of the study participants, 59.8% of current employees, 63.6% of past employees, and 32.7% of never employed women had mental health or behavior problems. In the regression model, history of abuse was significantly associated with depression. Participants who were current employees and reported family debt and a history of abuse were significantly more likely to have mental health or behavior problems. Mental health issues such as depression and behavior problems were more likely among adolescent girls currently employed in textile industries. Further studies into the causes of this phenomenon are needed.

Research and development of a new RF-assisted device for bloodless rapid transection of the liver: Computational modeling and in vivo experiments

PubMed Central

Burdío, Fernando; Berjano, Enrique J; Navarro, Ana; Burdío, José M; Grande, Luis; Gonzalez, Ana; Cruz, Ignacio; Güemes, Antonio; Sousa, Ramón; Subirá, Jorge; Castiella, Tomás; Poves, Ignasi; Lequerica, Juan L

2009-01-01

Background Efficient and safe transection of biological tissue in liver surgery is strongly dependent on the ability to address both parenchymal division and hemostasis simultaneously. In addition to the conventional clamp crushing or finger fracture methods other techniques based on radiofrequency (RF) currents have been extensively employed to reduce intraoperative blood loss. In this paper we present our broad research plan for a new RF-assisted device for bloodless, rapid resection of the liver. Methods Our research plan includes computer modeling and in vivo studies. Computer modeling was based on the Finite Element Method (FEM) and allowed us to estimate the distribution of electrical power deposited in the tissue, along with assessing the effect of the characteristics of the device on the temperature profiles. Studies based on in vivo pig liver models provided a comparison of the performance of the new device with other techniques (saline-linked technology) currently employed in clinical practice. Finally, the plan includes a pilot clinical trial, in which both the new device and the accessory equipment are seen to comply with all safety requirements. Results The FEM results showed a high electrical gradient around the tip of the blade, responsible for the maximal increase of temperature at that point, where temperature reached 100°C in only 3.85 s. Other hot points with lower temperatures were located at the proximal edge of the device. Additional simulations with an electrically insulated blade produced more uniform and larger lesions (assessed as the 55°C isotherm) than the electrically conducting blade. The in vivo study, in turn, showed greater transection speed (3 ± 0 and 3 ± 1 cm2/min for the new device in the open and laparoscopic approaches respectively) and also lower blood loss (70 ± 74 and 26 ± 34 mL) during transection of the liver, as compared to saline-linked technology (2 ± 1 cm2/min with P = 0.002, and 527 ± 273 mL with P = 0.001). Conclusion A new RF-assisted device for bloodless, rapid liver resection was designed, built and tested. The results demonstrate the potential advantages of this device over others currently employed. PMID:19296852

Exploring the ring current of carbon nanotubes by first-principles calculations.

PubMed

Ren, Pengju; Zheng, Anmin; Xiao, Jianping; Pan, Xiulian; Bao, Xinhe

2015-02-01

Ring current is a fundamental concept to understand the nuclear magnetic resonance (NMR) properties and aromaticity for conjugated systems, such as carbon nanotubes (CNTs). Employing the recently developed gauge including projector augmented wave (GIPAW) method, we studied the ring currents of CNTs systematically and visualized their distribution. The ring current patterns are determined by the semiconducting or metallic properties of CNTs. The discrepancy is mainly caused by the axial component of external magnetic fields, whereas the radial component induced ring currents are almost independent of the electronic structures of CNTs, where the intensities of the ring currents are linearly related to the diameters of the CNTs. Although the ring currents induced by the radial component are more intense than those by the axial component, only the latter determines the overall NMR responses and aromaticity of the CNTs as well. Furthermore, the semiconducting CNTs are more aromatic than their metallic counterparts due to the existence of delocalized ring currents on the semiconducting CNTs. These fundamental features are of vital importance for the development of CNT-based nanoelectronics and applications in magnetic fields.

Exploring the ring current of carbon nanotubes by first-principles calculations

PubMed Central

Ren, Pengju; Zheng, Anmin; Xiao, Jianping; Pan, Xiulian

2015-01-01

Ring current is a fundamental concept to understand the nuclear magnetic resonance (NMR) properties and aromaticity for conjugated systems, such as carbon nanotubes (CNTs). Employing the recently developed gauge including projector augmented wave (GIPAW) method, we studied the ring currents of CNTs systematically and visualized their distribution. The ring current patterns are determined by the semiconducting or metallic properties of CNTs. The discrepancy is mainly caused by the axial component of external magnetic fields, whereas the radial component induced ring currents are almost independent of the electronic structures of CNTs, where the intensities of the ring currents are linearly related to the diameters of the CNTs. Although the ring currents induced by the radial component are more intense than those by the axial component, only the latter determines the overall NMR responses and aromaticity of the CNTs as well. Furthermore, the semiconducting CNTs are more aromatic than their metallic counterparts due to the existence of delocalized ring currents on the semiconducting CNTs. These fundamental features are of vital importance for the development of CNT-based nanoelectronics and applications in magnetic fields. PMID:29560175

Electrical voltages and resistances measured to inspect metallic cased wells and pipelines

DOEpatents

Vail, III, William Banning; Momii, Steven Thomas

2001-01-01

A cased well in the earth is electrically energized with A.C. current. Voltages are measured from three voltage measurement electrodes in electrical contact with the interior of the casing while the casing is electrically energized. In a measurement mode, A.C. current is conducted from a first current carrying electrode within the cased well to a remote second current carrying electrode located on the surface of the earth. In a calibration mode, current is passed from the first current carrying electrode to a third current carrying electrode located vertically at a different position within the cased well, where the three voltage measurement electrodes are located vertically in between the first and third current carrying electrodes. Voltages along the casing and resistances along the casing are measured to determine wall thickness and the location of any casing collars present so as to electrically inspect the casing. Similar methods are employed to energize a pipeline to measure the wall thickness of the pipeline and the location of pipe joints to electrically inspect the pipeline.

Electrical voltages and resistances measured to inspect metallic cased wells and pipelines

DOEpatents

Vail III, William Banning; Momii, Steven Thomas

2003-06-10

A cased well in the earth is electrically energized with A.C. current. Voltages are measured from three voltage measurement electrodes in electrical contact with the interior of the casing while the casing is electrically energized. In a measurement mode, A.C. current is conducted from a first current carrying electrode within the cased well to a remote second current carrying electrode located on the surface of the earth. In a calibration mode, current is passed from the first current carrying electrode to a third current carrying electrode located vertically at a different position within the cased well, where the three voltage measurement electrodes are located vertically in between the first and third current carrying electrodes. Voltages along the casing and resistances along the casing are measured to determine wall thickness and the location of any casing collars present so as to electrically inspect the casing. Similar methods are employed to energize a pipeline to measure the wall thickness of the pipeline and the location of pipe joints to electrically inspect the pipeline.

A Rapid Aerodynamic Design Procedure Based on Artificial Neural Networks

NASA Technical Reports Server (NTRS)

Rai, Man Mohan

2001-01-01

An aerodynamic design procedure that uses neural networks to model the functional behavior of the objective function in design space has been developed. This method incorporates several improvements to an earlier method that employed a strategy called parameter-based partitioning of the design space in order to reduce the computational costs associated with design optimization. As with the earlier method, the current method uses a sequence of response surfaces to traverse the design space in search of the optimal solution. The new method yields significant reductions in computational costs by using composite response surfaces with better generalization capabilities and by exploiting synergies between the optimization method and the simulation codes used to generate the training data. These reductions in design optimization costs are demonstrated for a turbine airfoil design study where a generic shape is evolved into an optimal airfoil.

Novel Digital Driving Method Using Dual Scan for Active Matrix Organic Light-Emitting Diode Displays

NASA Astrophysics Data System (ADS)

Jung, Myoung Hoon; Choi, Inho; Chung, Hoon-Ju; Kim, Ohyun

2008-11-01

A new digital driving method has been developed for low-temperature polycrystalline silicon, transistor-driven, active-matrix organic light-emitting diode (AM-OLED) displays by time-ratio gray-scale expression. This driving method effectively increases the emission ratio and the number of subfields by inserting another subfield set into nondisplay periods in the conventional digital driving method. By employing the proposed modified gravity center coding, this method can be used to effectively compensate for dynamic false contour noise. The operation and performance were verified by current measurement and image simulation. The simulation results using eight test images show that the proposed approach improves the average peak signal-to-noise ratio by 2.61 dB, and the emission ratio by 20.5%, compared with the conventional digital driving method.

System and method for measuring ocean surface currents at locations remote from land masses using synthetic aperture radar

NASA Technical Reports Server (NTRS)

Young, Lawrence E. (Inventor)

1991-01-01

A system for measuring ocean surface currents from an airborne platform is disclosed. A radar system having two spaced antennas wherein one antenna is driven and return signals from the ocean surface are detected by both antennas is employed to get raw ocean current data which are saved for later processing. There are a pair of global positioning system (GPS) systems including a first antenna carried by the platform at a first location and a second antenna carried by the platform at a second location displaced from the first antenna for determining the position of the antennas from signals from orbiting GPS navigational satellites. Data are also saved for later processing. The saved data are subsequently processed by a ground-based computer system to determine the position, orientation, and velocity of the platform as well as to derive measurements of currents on the ocean surface.

High-Speed Current dq PI Controller for Vector Controlled PMSM Drive

PubMed Central

Reaz, Mamun Bin Ibne; Rahman, Labonnah Farzana; Chang, Tae Gyu

2014-01-01

High-speed current controller for vector controlled permanent magnet synchronous motor (PMSM) is presented. The controller is developed based on modular design for faster calculation and uses fixed-point proportional-integral (PI) method for improved accuracy. Current dq controller is usually implemented in digital signal processor (DSP) based computer. However, DSP based solutions are reaching their physical limits, which are few microseconds. Besides, digital solutions suffer from high implementation cost. In this research, the overall controller is realizing in field programmable gate array (FPGA). FPGA implementation of the overall controlling algorithm will certainly trim down the execution time significantly to guarantee the steadiness of the motor. Agilent 16821A Logic Analyzer is employed to validate the result of the implemented design in FPGA. Experimental results indicate that the proposed current dq PI controller needs only 50 ns of execution time in 40 MHz clock, which is the lowest computational cycle for the era. PMID:24574913

A method for estimating cost savings for population health management programs.

PubMed

Murphy, Shannon M E; McGready, John; Griswold, Michael E; Sylvia, Martha L

2013-04-01

To develop a quasi-experimental method for estimating Population Health Management (PHM) program savings that mitigates common sources of confounding, supports regular updates for continued program monitoring, and estimates model precision. Administrative, program, and claims records from January 2005 through June 2009. Data are aggregated by member and month. Study participants include chronically ill adult commercial health plan members. The intervention group consists of members currently enrolled in PHM, stratified by intensity level. Comparison groups include (1) members never enrolled, and (2) PHM participants not currently enrolled. Mixed model smoothing is employed to regress monthly medical costs on time (in months), a history of PHM enrollment, and monthly program enrollment by intensity level. Comparison group trends are used to estimate expected costs for intervention members. Savings are realized when PHM participants' costs are lower than expected. This method mitigates many of the limitations faced using traditional pre-post models for estimating PHM savings in an observational setting, supports replication for ongoing monitoring, and performs basic statistical inference. This method provides payers with a confident basis for making investment decisions. © Health Research and Educational Trust.

Delayed Workforce Entry and High Emigration Rates for Recent Canadian Radiation Oncology Graduates

DOE Office of Scientific and Technical Information (OSTI.GOV)

Loewen, Shaun K., E-mail: shaun.loewen@cancercare.mb.ca; Halperin, Ross; Lefresne, Shilo

Purpose: To determine the employment status and location of recent Canadian radiation oncology (RO) graduates and to identify current workforce entry trends. Methods and Materials: A fill-in-the-blank spreadsheet was distributed to all RO program directors in December 2013 and June 2014, requesting the employment status and location of their graduates over the last 3 years. Visa trainee graduates were excluded. Results: Response rate from program directors was 100% for both survey administrations. Of 101 graduates identified, 99 (98%) had known employment status and location. In the December survey, 5 2013 graduates (16%), 17 2012 graduates (59%), and 18 2011 graduates (75%) hadmore » permanent staff employment. Six months later, 5 2014 graduates (29%), 15 2013 graduates (48%), 24 2012 graduates (83%), and 21 2011 graduates (88%) had secured staff positions. Fellowships and temporary locums were common for those without staff employment. The proportion of graduates with staff positions abroad increased from 22% to 26% 6 months later. Conclusions: Workforce entry for most RO graduates was delayed but showed steady improvement with longer time after graduation. High emigration rates for jobs abroad signify domestic employment challenges for newly certified, Canadian-trained radiation oncologists. Coordination on a national level is required to address and regulate radiation oncologist supply and demand disequilibrium in Canada.« less

Postsecondary Employment Experiences Among Young Adults With an Autism Spectrum Disorder RH: Employment in Young Adults With Autism

PubMed Central

Roux, Anne M.; Shattuck, Paul T.; Cooper, Benjamin P.; Anderson, Kristy A.; Wagner, Mary; Narendorf, Sarah C.

2013-01-01

Objective We examined postsecondary employment experiences of young adults with an autism spectrum disorder (ASD) and compared these outcomes with those of young adults with different disabilities. Method Data were from Wave 5 of the National Longitudinal Transition Study 2 (NLTS2), a nationally representative survey of young adults who had received special education services during high school. We examined the prevalence of ever having had—and currently having—a paid job at 21–25 years of age. We analyzed rates of full employment, wages earned, number of jobs held since high school, and job types. Results About half (53.4%) of young adults with an ASD had ever worked for pay outside the home since leaving high school, the lowest rate among disability groups. Young adults with an ASD earned an average of $8.10 per hour, significantly lower than average wages for young adults in the comparison groups, and held jobs that clustered within fewer occupational types. Odds of ever having had a paid job were higher for those who were older, from higher-income households, and with better conversational abilities or functional skills. Conclusions Findings of worse employment outcomes for young adults with an ASD suggest this population is experiencing particular difficulty in successfully transitioning into employment. Research is needed to determine strategies for improving outcomes as these young adults transition into adulthood. PMID:23972695

Gram stain method shows better sensitivity than clinical criteria for detection of bacterial vaginosis in surveillance of pregnant, low-income women in a clinical setting.

PubMed Central

Tam, M T; Yungbluth, M; Myles, T

1998-01-01

OBJECTIVE: The purpose of the study is to determine whether the Gram stain method is superior to the clinical criteria for the diagnosis of bacterial vaginosis in low-income pregnant women seen in a resident clinic setting. The clinical criteria is the current diagnostic method employed to diagnose bacterial vaginosis. STUDY DESIGN: In this study, 51 pregnant women with vaginal discharge were prospectively evaluated. All were screened using the clinical criteria, Gram stain method, and culture of the discharge. The modified scoring system instituted by Nugent et al. (J Clin Microbiol 29:297-301, 1991) was employed in reading the Gram stain smears. The clinical criteria were then compared with the Gram stain method. Isolation of moderate to many Gardnerella vaginalis growth by culture was used as the confirmatory finding. RESULTS: Sensitivity of the Gram stain method (91%) was significantly higher than that of the clinical criteria (46%), (sign test P = 0.0023, < 0.01). The Gram stain method also has both a low false-negative (4%) and high negative predictive value (96%), making it an ideal diagnostic test. CONCLUSION: The Gram stain method is a rapid and cost-effective test that is also highly reproducible and readily available in many laboratories. These features make the Gram stain method a more desirable screening procedure for bacterial vaginosis in a clinic population. PMID:9894174

Improved Method for Prediction of Attainable Wing Leading-Edge Thrust

NASA Technical Reports Server (NTRS)

Carlson, Harry W.; McElroy, Marcus O.; Lessard, Wendy B.; McCullers, L. Arnold

1996-01-01

Prediction of the loss of wing leading-edge thrust and the accompanying increase in drag due to lift, when flow is not completely attached, presents a difficult but commonly encountered problem. A method (called the previous method) for the prediction of attainable leading-edge thrust and the resultant effect on airplane aerodynamic performance has been in use for more than a decade. Recently, the method has been revised to enhance its applicability to current airplane design and evaluation problems. The improved method (called the present method) provides for a greater range of airfoil shapes from very sharp to very blunt leading edges. It is also based on a wider range of Reynolds numbers than was available for the previous method. The present method, when employed in computer codes for aerodynamic analysis, generally results in improved correlation with experimental wing-body axial-force data and provides reasonable estimates of the measured drag.

Global precarious employment and health inequalities: working conditions, social class, or precariat?

PubMed

Muntaner, Carles

2016-06-20

Changes in employment conditions since the 1980s have been referred to as precarious employment, and terms like flexible, atypical, temporary, part-time, contract, self-employed, irregular, or non-standard employment have also been used. In this essay I review some of the current critiques to the precarious employment construct and advance some potential solutions for its use in epidemiology and public health.

Employer Child Care Surviving and Thriving: Employer Child Care Trend Report #17

ERIC Educational Resources Information Center

Neugebauer, Roger

2010-01-01

Today employer child care is accepted as standard benefit for employees and nearly all Fortune 500 companies have gotten involved. The current recession threatened to halt the growth of employer child care as companies consolidated, cut back, and folded. However, in reviewing the status of employer child care for this trend report, it appears that…

The Negro in the Drugstore Industry. The Racial Policies of American Industry.

ERIC Educational Resources Information Center

Fletcher, F. Marion; Keeney, Marie R.

This study examines the historical and current levels of Negro employment in drugstores, the reasons for the employment patterns, the prospects for greater Negro employment in high status jobs, and the effects of industry employment policies on the retail drug industry employment of Negroes. The report explores the nature of the retail drug…

Factors associated with contraceptive practices of married women in Bangladesh with respect to their employment status.

PubMed

Laskar, M S; Mahbub, M H; Yokoyama, Kenjiro; Inoue, Masaiwa; Harada, Noriaki

2006-09-01

There might be a difference between non-working and working women in their perception of rights and privileges which may influence their contraceptive behavior. The purpose of this study was to examine contraceptive behavior among non-working and working women in Bangladesh determining associated factors. Analysis was based on data from the 1999-2000 Bangladesh Demographic and Health Survey which employs nationally representative sample. The prevalence of current contraceptive use (any method) was 58.2% among non-working women and 65.5% among working women. Both rates are still low for the country. Some factors, such as discussed family planning with husband, husband approves family planning, desire for more children, and husband lives together, were influential determinants of lower contraceptive prevalence among the non-working women. The results indicate a necessity for social activities promoting husband-wife communication and women's participation in employment to enhance the use of contraceptives among Bangladeshi women, especially non-working women.

Three-dimensional printed models in congenital heart disease.

PubMed

Cantinotti, Massimiliano; Valverde, Israel; Kutty, Shelby

2017-01-01

The purpose of this article is to discuss technical considerations and current applications of three-dimensional (3D) printing in congenital heart disease (CHD). CHD represent an attractive field for the application of 3D printed models, with consistent progress made in the past decade. Current 3D models are able to reproduce complex cardiac and extra-cardiac anatomy including small details with very limited range of errors (<1 mm), so this tool could be of value in the planning of surgical or percutaneous treatments for selected cases of CHD. However, the steps involved in the building of 3D models, consisting of image acquisition and selection, segmentation, and printing are highly operator dependent. Current 3D models may be rigid or flexible, but unable to reproduce the physiologic variations during the cardiac cycle. Furthermore, high costs and long average segmentation and printing times (18-24 h) limit a more extensive use. There is a need for better standardization of the procedure employed for collection of the images, the segmentation methods and processes, the phase of cardiac cycle used, and in the materials employed for printing. More studies are necessary to evaluate the diagnostic accuracy and cost-effectiveness of 3D printed models in congenital cardiac care.

Nurse employment contracts in Chinese hospitals: impact of inequitable benefit structures on nurse and patient satisfaction

PubMed Central

2014-01-01

Purpose Ongoing economic and health system reforms in China have transformed nurse employment in Chinese hospitals. Employment of ‘bianzhi’ nurses, a type of position with state-guaranteed lifetime employment that has been customary since 1949, is decreasing while there is an increase in the contract-based nurse employment with limited job security and reduced benefits. The consequences of inequities between the two types of nurses in terms of wages and job-related benefits are unknown. This study examined current rates of contract-based nurse employment and the effects of the new nurse contract employment strategy on nurse and patient outcomes in Chinese hospitals. Methods This cross-sectional study used geographically representative survey data collected from 2008 to 2010 from 181 hospitals in six provinces, two municipalities, and one autonomous region in China. Logistic regression models were used to estimate the association between contract-based nurse utilization, dissatisfaction among contract-based nurses, nurse intentions to leave their positions, and patient satisfaction, controlling for nurse, patient, and hospital characteristics. Principal Results Hospital-level utilization of contract-based nurses varies greatly from 0 to 91%, with an average of 51%. Contract-based nurses were significantly more dissatisfied with their remuneration and benefits than ‘bianzhi’ nurses who have more job security (P <0.01). Contract-based nurses who were dissatisfied with their salary and benefits were more likely to intend to leave their current positions (P <0.01). Hospitals with high levels of dissatisfaction with salary and benefits among contract-based nurses were rated lower and less likely to be recommended by patients (P < 0.05). Conclusions Our results suggest a high utilization of contract-based nurses in Chinese hospitals, and that the inequities in benefits between contract-based nurses and ‘bianzhi’ nurses may adversely affect both nurse and patient satisfaction in hospitals. Our study provides empirical support for the ‘equal pay for equal work’ policy emphasized by the China Ministry of Health’s recent regulations, and calls for efforts in Chinese hospitals to eliminate the disparities between ‘bianzhi’ and contract-based nurses. PMID:24418223

Mapping human dimensions of climate change research in the Canadian Arctic.

PubMed

Ford, James D; Bolton, Kenyon; Shirley, Jamal; Pearce, Tristan; Tremblay, Martin; Westlake, Michael

2012-12-01

This study maps current understanding and research trends on the human dimensions of climate change (HDCC) in the eastern and central Canadian Arctic. Developing a systematic literature review methodology, 117 peer reviewed articles are identified and examined using quantitative and qualitative methods. The research highlights the rapid expansion of HDCC studies over the last decade. Early scholarship was dominated by work documenting Inuit observations of climate change, with research employing vulnerability concepts and terminology now common. Adaptation studies which seek to identify and evaluate opportunities to reduce vulnerability to climate change and take advantage of new opportunities remain in their infancy. Over the last 5 years there has been an increase social science-led research, with many studies employing key principles of community-based research. We currently have baseline understanding of climate change impacts, adaptation, and vulnerability in the region, but key gaps are evident. Future research needs to target significant geographic disparities in understanding, consider risks and opportunities posed by climate change outside of the subsistence hunting sector, complement case study research with regional analyses, and focus on identifying and characterizing sustainable and feasible adaptation interventions.

Prevalence Rates of Work Organization Characteristics Among Workers in the U.S.: Data From the 2010 National Health Interview Survey

PubMed Central

Alterman, Toni; Luckhaupt, Sara E.; Dahlhamer, James M.; Ward, Brian W.; Calvert, Geoffrey M.

2015-01-01

Background Surveillance is needed to capture work organization characteristics and to identify their trends. Methods Data from the 2010 National Health Interview Survey (NHIS) were used to calculate prevalence rates for four work organization characteristics (long work hours, non-standard work arrangements, temporary positions, and alternative shifts) overall, and by demographic characteristics, and industry and occupation of current/recent employment. Results Data were available for 27,157 adults, of which 65% were current/recent workers. Among adults who worked in the past 12 months, 18.7% worked 48 hr or more per week, 7.2% worked 60 hr or more per week, 18.7% had non-standard work arrangements, 7.2% were in temporary positions, and 28.7% worked an alternative shift. Conclusions Prevalence rates of work organization characteristics are provided. These national estimates can be used to help occupational health professionals and employers to identify emerging occupational safety and health risks, allow researchers to examine associations with health, and use the data for benchmarking. PMID:22911666

Mapping the Human Toxome by Systems Toxicology

PubMed Central

Bouhifd, Mounir; Hogberg, Helena T.; Kleensang, Andre; Maertens, Alexandra; Zhao, Liang; Hartung, Thomas

2014-01-01

Toxicity testing typically involves studying adverse health outcomes in animals subjected to high doses of toxicants with subsequent extrapolation to expected human responses at lower doses. The low-throughput of current toxicity testing approaches (which are largely the same for industrial chemicals, pesticides and drugs) has led to a backlog of more than 80,000 chemicals to which human beings are potentially exposed whose potential toxicity remains largely unknown. Employing new testing strategies that employ the use of predictive, high-throughput cell-based assays (of human origin) to evaluate perturbations in key pathways, referred as pathways of toxicity, and to conduct targeted testing against those pathways, we can begin to greatly accelerate our ability to test the vast “storehouses” of chemical compounds using a rational, risk-based approach to chemical prioritization, and provide test results that are more predictive of human toxicity than current methods. The NIH Transformative Research Grant project Mapping the Human Toxome by Systems Toxicology aims at developing the tools for pathway mapping, annotation and validation as well as the respective knowledge base to share this information. PMID:24443875

A technique for verifying the input response function of neutron time-of-flight scintillation detectors using cosmic rays.

PubMed

Bonura, M A; Ruiz, C L; Fehl, D L; Cooper, G W; Chandler, G; Hahn, K D; Nelson, A J; Styron, J D; Torres, J A

2014-11-01

An accurate interpretation of DD or DT fusion neutron time-of-flight (nTOF) signals from current mode detectors employed at the Z-facility at Sandia National Laboratories requires that the instrument response functions (IRF's) be deconvolved from the measured nTOF signals. A calibration facility that produces detectable sub-ns radiation pulses is typically used to measure the IRF of such detectors. This work, however, reports on a simple method that utilizes cosmic radiation to measure the IRF of nTOF detectors, operated in pulse-counting mode. The characterizing metrics reported here are the throughput delay and full-width-at-half-maximum. This simple approach yields consistent IRF results with the same detectors calibrated in 2007 at a LINAC bremsstrahlung accelerator (Idaho State University). In particular, the IRF metrics from these two approaches and their dependence on the photomultipliers bias agree to within a few per cent. This information may thus be used to verify if the IRF for a given nTOF detector employed at Z has changed since its original current-mode calibration and warrants re-measurement.

Gender and Employment. Current Statistics and Their Implications.

ERIC Educational Resources Information Center

Equity Issues, 1996

1996-01-01

This publication contains three fact sheets on gender and employment statistics and their implications. The fact sheets are divided into two sections--statistics and implications. The statistics present the current situation of men and women workers as they relate to occupations, education, and earnings. The implications express suggestions for…

Southern California Area Environmental Manpower and Training Needs Study.

ERIC Educational Resources Information Center

Kowalski, James A.

A survey was conducted to identify environmentally related jobs, the current employment need in these areas, the 5-year projection, and the current status of educational training programs to meet the employment needs for technicians or paraprofessionals within a five-county area of Southern California. The environmentally related occupations…

76 FR 44960 - Agency Information Collection Activities; Submission for OMB Review; Comment Request; Report on...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-27

... for OMB Review; Comment Request; Report on Current Employment Statistics ACTION: Notice. SUMMARY: The Department of Labor (DOL) is submitting the revised Bureau of Labor Statistics (BLS) sponsored information collection request (ICR) titled, ``Report on Current Employment Statistics,'' to the Office of Management and...

Optimization of focality and direction in dense electrode array transcranial direct current stimulation (tDCS)

NASA Astrophysics Data System (ADS)

Guler, Seyhmus; Dannhauer, Moritz; Erem, Burak; Macleod, Rob; Tucker, Don; Turovets, Sergei; Luu, Phan; Erdogmus, Deniz; Brooks, Dana H.

2016-06-01

Objective. Transcranial direct current stimulation (tDCS) aims to alter brain function non-invasively via electrodes placed on the scalp. Conventional tDCS uses two relatively large patch electrodes to deliver electrical current to the brain region of interest (ROI). Recent studies have shown that using dense arrays containing up to 512 smaller electrodes may increase the precision of targeting ROIs. However, this creates a need for methods to determine effective and safe stimulus patterns as the number of degrees of freedom is much higher with such arrays. Several approaches to this problem have appeared in the literature. In this paper, we describe a new method for calculating optimal electrode stimulus patterns for targeted and directional modulation in dense array tDCS which differs in some important aspects with methods reported to date. Approach. We optimize stimulus pattern of dense arrays with fixed electrode placement to maximize the current density in a particular direction in the ROI. We impose a flexible set of safety constraints on the current power in the brain, individual electrode currents, and total injected current, to protect subject safety. The proposed optimization problem is convex and thus efficiently solved using existing optimization software to find unique and globally optimal electrode stimulus patterns. Main results. Solutions for four anatomical ROIs based on a realistic head model are shown as exemplary results. To illustrate the differences between our approach and previously introduced methods, we compare our method with two of the other leading methods in the literature. We also report on extensive simulations that show the effect of the values chosen for each proposed safety constraint bound on the optimized stimulus patterns. Significance. The proposed optimization approach employs volume based ROIs, easily adapts to different sets of safety constraints, and takes negligible time to compute. An in-depth comparison study gives insight into the relationship between different objective criteria and optimized stimulus patterns. In addition, the analysis of the interaction between optimized stimulus patterns and safety constraint bounds suggests that more precise current localization in the ROI, with improved safety criterion, may be achieved by careful selection of the constraint bounds.

Surgical management of pain.

PubMed

Goodman, R R

1990-07-01

This article presents an overview of the neuroanatomical, neurochemical, and neurophysiological substrates of nociception relevant to the neurosurgical treatment of chronic pain. Consideration is given to the various procedures currently employed in the treatment of patients suffering from medically intractable chronic pain of both benign and malignant diseases, including their indications, techniques, and results. Particular attention is given to the modern neuroaugmentative methods, such as electrical stimulation and CNS drug infusion, that are progressively overshadowing the previously developed ablative procedures.

Unstructured Polyhedral Mesh Thermal Radiation Diffusion

DOE Office of Scientific and Technical Information (OSTI.GOV)

Palmer, T.S.; Zika, M.R.; Madsen, N.K.

2000-07-27

Unstructured mesh particle transport and diffusion methods are gaining wider acceptance as mesh generation, scientific visualization and linear solvers improve. This paper describes an algorithm that is currently being used in the KULL code at Lawrence Livermore National Laboratory to solve the radiative transfer equations. The algorithm employs a point-centered diffusion discretization on arbitrary polyhedral meshes in 3D. We present the results of a few test problems to illustrate the capabilities of the radiation diffusion module.

Volcanic hazards in Central America

USGS Publications Warehouse

Rose, William I.; Bluth, Gregg J.S.; Carr, Michael J.; Ewert, John W.; Patino, Lina C.; Vallance, James W.

2006-01-01

This volume is a sampling of current scientific work about volcanoes in Central America with specific application to hazards. The papers reflect a variety of international and interdisciplinary collaborations and employ new methods. The book will be of interest to a broad cross section of scientists, especially volcanologists. The volume also will interest students who aspire to work in the field of volcano hazards mitigation or who may want to work in one of Earth’s most volcanically active areas.

A novel universal real-time PCR system using the attached universal duplex probes for quantitative analysis of nucleic acids.

PubMed

Yang, Litao; Liang, Wanqi; Jiang, Lingxi; Li, Wenquan; Cao, Wei; Wilson, Zoe A; Zhang, Dabing

2008-06-04

Real-time PCR techniques are being widely used for nucleic acids analysis, but one limitation of current frequently employed real-time PCR is the high cost of the labeled probe for each target molecule. We describe a real-time PCR technique employing attached universal duplex probes (AUDP), which has the advantage of generating fluorescence by probe hydrolysis and strand displacement over current real-time PCR methods. AUDP involves one set of universal duplex probes in which the 5' end of the fluorescent probe (FP) and a complementary quenching probe (QP) lie in close proximity so that fluorescence can be quenched. The PCR primer pair with attached universal template (UT) and the FP are identical to the UT sequence. We have shown that the AUDP technique can be used for detecting multiple target DNA sequences in both simplex and duplex real-time PCR assays for gene expression analysis, genotype identification, and genetically modified organism (GMO) quantification with comparable sensitivity, reproducibility, and repeatability with other real-time PCR methods. The results from GMO quantification, gene expression analysis, genotype identification, and GMO quantification using AUDP real-time PCR assays indicate that the AUDP real-time PCR technique has been successfully applied in nucleic acids analysis, and the developed AUDP real-time PCR technique will offer an alternative way for nucleic acid analysis with high efficiency, reliability, and flexibility at low cost.

Current perspectives of herpesviral retinitis and choroiditis.

PubMed

Madhavan, H N; Priya, K; Biswas, J

2004-10-01

Vision-threatening viral retinitis are primarily caused by members of the herpesvirus family. The biology and molecular characterization of herpesviruses, clinical presentations of retinopathies, pathology and pathogenesis including the host responses, epidemiology and the laboratory methods of aetiological diagnosis of these diseases are described. Clinical syndromes are acute retinal necrosis (ARN), progressive outer retinal necrosis (PORN), cytomegalovirus (CMV) retinitis, multifocal choroiditis and serpiginous choroiditis besides other viral retinopathies. Herpes simplex virus (HSV) retinitis is more common in immunocompetent persons while varicella zoster virus (VZV) affects both immunocompetent and immunosuppressed patients equally. CMV retinitis is most common among patients with AIDS. The currently employed laboratory methods of antigen detection, virus isolation and antibody detection by enzyme linked immuno-sorbent assay (ELISA) have low sensitivity. Polymerase chain reaction (PCR) has increased the value of diagnosis due to its high clinical sensitivity and absolute specificity in detection of herpesviruses in intraocular specimens.

Microfluidic device and methods for focusing fluid streams using electroosmotically induced pressures

DOEpatents

Jacobson, Stephen C.; Ramsey, J. Michael

2010-06-01

A microfabricated device employing a bridging membrane and methods for electrokinetic transport of a liquid phase biological or chemical material using the same are described. The bridging membrane is deployed in or adjacent to a microchannel and permits either electric current flow or the transport of gas species, while inhibiting the bulk flow of material. The use of bridging membranes in accordance with this invention is applicable to electrokinetically inducing fluid flow to confine a selected material in a region of a microchannel that is not influenced by an electric field. Other structures for inducing fluid flow in accordance with this invention include nanochannel bridging membranes and alternating current fluid pumping devices. Applications of the bridging membranes according to this invention include the separation of species from a sample material, valving of fluids in a microchannel network, mixing of different materials in a microchannel, and the pumping of fluids.

Preparing Students for Careers in Science and Industry with Computational Physics

NASA Astrophysics Data System (ADS)

Florinski, V. A.

2011-12-01

Funded by NSF CAREER grant, the University of Alabama (UAH) in Huntsville has launched a new graduate program in Computational Physics. It is universally accepted that today's physics is done on a computer. The program blends the boundary between physics and computer science by teaching student modern, practical techniques of solving difficult physics problems using diverse computational platforms. Currently consisting of two courses first offered in the Fall of 2011, the program will eventually include 5 courses covering methods for fluid dynamics, particle transport via stochastic methods, and hybrid and PIC plasma simulations. The UAH's unique location allows courses to be shaped through discussions with faculty, NASA/MSFC researchers and local R&D business representatives, i.e., potential employers of the program's graduates. Students currently participating in the program have all begun their research careers in space and plasma physics; many are presenting their research at this meeting.

A partially reflecting random walk on spheres algorithm for electrical impedance tomography

DOE Office of Scientific and Technical Information (OSTI.GOV)

Maire, Sylvain, E-mail: maire@univ-tln.fr; Simon, Martin, E-mail: simon@math.uni-mainz.de

2015-12-15

In this work, we develop a probabilistic estimator for the voltage-to-current map arising in electrical impedance tomography. This novel so-called partially reflecting random walk on spheres estimator enables Monte Carlo methods to compute the voltage-to-current map in an embarrassingly parallel manner, which is an important issue with regard to the corresponding inverse problem. Our method uses the well-known random walk on spheres algorithm inside subdomains where the diffusion coefficient is constant and employs replacement techniques motivated by finite difference discretization to deal with both mixed boundary conditions and interface transmission conditions. We analyze the global bias and the variance ofmore » the new estimator both theoretically and experimentally. Subsequently, the variance of the new estimator is considerably reduced via a novel control variate conditional sampling technique which yields a highly efficient hybrid forward solver coupling probabilistic and deterministic algorithms.« less

In vitro plant tissue culture: means for production of biological active compounds.

PubMed

Espinosa-Leal, Claudia A; Puente-Garza, César A; García-Lara, Silverio

2018-05-07

Plant tissue culture as an important tool for the continuous production of active compounds including secondary metabolites and engineered molecules. Novel methods (gene editing, abiotic stress) can improve the technique. Humans have a long history of reliance on plants for a supply of food, shelter and, most importantly, medicine. Current-day pharmaceuticals are typically based on plant-derived metabolites, with new products being discovered constantly. Nevertheless, the consistent and uniform supply of plant pharmaceuticals has often been compromised. One alternative for the production of important plant active compounds is in vitro plant tissue culture, as it assures independence from geographical conditions by eliminating the need to rely on wild plants. Plant transformation also allows the further use of plants for the production of engineered compounds, such as vaccines and multiple pharmaceuticals. This review summarizes the important bioactive compounds currently produced by plant tissue culture and the fundamental methods and plants employed for their production.

Long-Term Effects of Mental disorders on Employment In the National Comorbidity Survey Ten-Year Follow-up

PubMed Central

Mojtabai, Ramin; Stuart, Elizabeth A.; Hwang, Irving; Susukida, Ryoko; Eaton, William W.; Sampson, Nancy; Kessler, Ronald C.

2015-01-01

Purpose Although significant negative associations of mental disorders with employment have been documented in epidemiological research, much of this research was based on cross-sectional samples and focused only on severe and persistent mental disorders. The present study examined the longitudinal associations of more common mental disorders with employment. Methods Data on the associations of common mental disorders with employment are presented here from 4,501 respondents in the National Comorbidity Survey panel study, a two-wave community epidemiological survey of respondents aged 15-54 at baseline (1990-1992) who were re-interviewed in 2001-2003 and were employed, unemployed in the labor force or student at baseline. Lifetime mental disorders at baseline and disorders with onset after baseline were assessed with the Composite International Diagnostic Interview, a fully-structured interview that assessed lifetime prevalence of internalizing fear disorders (panic, phobias), anxiety/misery disorders (major depression, generalized anxiety disorder, post-traumatic stress disorder), externalizing disorders (conduct disorder, alcohol and illicit drug abuse-dependence), and bipolar disorder. Results Both baseline lifetime disorders and disorders with onsets after baseline were associated with significantly reduced odds of subsequent employment among respondents who were either employed or students at baseline. Population projections based on the assumption that these associations represented causal effects suggest that the mental disorders considered here were associated with 1.7-3.2 million adults being unemployed in the US population at follow-up. Conclusions Expanded access to treatment among current employees and students with mental disorders might lead to improved employment outcomes in these segments of the population. PMID:26211661

Verification of a non-hydrostatic dynamical core using horizontally spectral element vertically finite difference method: 2-D aspects

NASA Astrophysics Data System (ADS)

Choi, S.-J.; Giraldo, F. X.; Kim, J.; Shin, S.

2014-06-01

The non-hydrostatic (NH) compressible Euler equations of dry atmosphere are solved in a simplified two dimensional (2-D) slice framework employing a spectral element method (SEM) for the horizontal discretization and a finite difference method (FDM) for the vertical discretization. The SEM uses high-order nodal basis functions associated with Lagrange polynomials based on Gauss-Lobatto-Legendre (GLL) quadrature points. The FDM employs a third-order upwind biased scheme for the vertical flux terms and a centered finite difference scheme for the vertical derivative terms and quadrature. The Euler equations used here are in a flux form based on the hydrostatic pressure vertical coordinate, which are the same as those used in the Weather Research and Forecasting (WRF) model, but a hybrid sigma-pressure vertical coordinate is implemented in this model. We verified the model by conducting widely used standard benchmark tests: the inertia-gravity wave, rising thermal bubble, density current wave, and linear hydrostatic mountain wave. The results from those tests demonstrate that the horizontally spectral element vertically finite difference model is accurate and robust. By using the 2-D slice model, we effectively show that the combined spatial discretization method of the spectral element and finite difference method in the horizontal and vertical directions, respectively, offers a viable method for the development of a NH dynamical core.

Rapid determination of actinides in seawater samples

DOE Office of Scientific and Technical Information (OSTI.GOV)

Maxwell, Sherrod L.; Culligan, Brian K.; Hutchison, Jay B.

2014-03-09

A new rapid method for the determination of actinides in seawater samples has been developed at the Savannah River National Laboratory. The actinides can be measured by alpha spectrometry or inductively-coupled plasma mass spectrometry. The new method employs novel pre-concentration steps to collect the actinide isotopes quickly from 80 L or more of seawater. Actinides are co-precipitated using an iron hydroxide co-precipitation step enhanced with Ti +3 reductant, followed by lanthanum fluoride co-precipitation. Stacked TEVA Resin and TRU Resin cartridges are used to rapidly separate Pu, U, and Np isotopes from seawater samples. TEVA Resin and DGA Resin were usedmore » to separate and measure Pu, Am and Cm isotopes in seawater volumes up to 80 L. This robust method is ideal for emergency seawater samples following a radiological incident. It can also be used, however, for the routine analysis of seawater samples for oceanographic studies to enhance efficiency and productivity. In contrast, many current methods to determine actinides in seawater can take 1–2 weeks and provide chemical yields of ~30–60 %. This new sample preparation method can be performed in 4–8 h with tracer yields of ~85–95 %. By employing a rapid, robust sample preparation method with high chemical yields, less seawater is needed to achieve lower or comparable detection limits for actinide isotopes with less time and effort.« less

PIXIE3D: A Parallel, Implicit, eXtended MHD 3D Code

NASA Astrophysics Data System (ADS)

Chacon, Luis

2006-10-01

We report on the development of PIXIE3D, a 3D parallel, fully implicit Newton-Krylov extended MHD code in general curvilinear geometry. PIXIE3D employs a second-order, finite-volume-based spatial discretization that satisfies remarkable properties such as being conservative, solenoidal in the magnetic field to machine precision, non-dissipative, and linearly and nonlinearly stable in the absence of physical dissipation. PIXIE3D employs fully-implicit Newton-Krylov methods for the time advance. Currently, second-order implicit schemes such as Crank-Nicolson and BDF2 (2^nd order backward differentiation formula) are available. PIXIE3D is fully parallel (employs PETSc for parallelism), and exhibits excellent parallel scalability. A parallel, scalable, MG preconditioning strategy, based on physics-based preconditioning ideas, has been developed for resistive MHD, and is currently being extended to Hall MHD. In this poster, we will report on progress in the algorithmic formulation for extended MHD, as well as the the serial and parallel performance of PIXIE3D in a variety of problems and geometries. L. Chac'on, Comput. Phys. Comm., 163 (3), 143-171 (2004) L. Chac'on et al., J. Comput. Phys. 178 (1), 15- 36 (2002); J. Comput. Phys., 188 (2), 573-592 (2003) L. Chac'on, 32nd EPS Conf. Plasma Physics, Tarragona, Spain, 2005 L. Chac'on et al., 33rd EPS Conf. Plasma Physics, Rome, Italy, 2006

Army Acquisition and Contracting Personnel Requirements: How are the Army’s Current Recruitment, Development and Retention Programs Meeting Current and Future Personnel Requirements?

DTIC Science & Technology

2011-09-01

Contracting Center SEEP Student Educational Employment Program SAP Simplified Acquisition Procedures SDDC Surface Deployment and Distribution...personnel is more decentralized in DoD than it is for the uniformed military, and civilian employment levels are more driven by operating budgets...private sector recruiting efforts and make it easier to apply for DoD acquisition positions 26 5. Maximize use of the Student Educational Employment

Facing the new facts of retirement income adequacy.

PubMed

Mills, Marjorie S; Young, Michael L

2004-01-01

A range of new factors is responsible for the current problem with insufficient retirement resources. Changes inside and outside the organization share partial responsibility, as do employee behaviors. In addition, other factors simply have been overlooked as employers and employees think about retirement income adequacy. The authors describe the current situation, discuss the significant risks it creates for both employers and employees and advise employers on what they should do to help employees build a more secure future in retirement.

HPLC method development for evolving applications in the pharmaceutical industry and nanoscale chemistry

NASA Astrophysics Data System (ADS)

Castiglione, Steven Louis

As scientific research trends towards trace levels and smaller architectures, the analytical chemist is often faced with the challenge of quantitating said species in a variety of matricies. The challenge is heightened when the analytes prove to be potentially toxic or possess physical or chemical properties that make traditional analytical methods problematic. In such cases, the successful development of an acceptable quantitative method plays a critical role in the ability to further develop the species under study. This is particularly true for pharmaceutical impurities and nanoparticles (NP). The first portion of the research focuses on the development of a part-per-billion level HPLC method for a substituted phenazine-class pharmaceutical impurity. The development of this method was required due to the need for a rapid methodology to quantitatively determine levels of a potentially toxic phenazine moiety in order to ensure patient safety. As the synthetic pathway for the active ingredient was continuously refined to produce progressively lower amounts of the phenazine impurity, the approach for increasingly sensitive quantitative methods was required. The approaches evolved across four discrete methods, each employing a unique scheme for analyte detection. All developed methods were evaluated with regards to accuracy, precision and linear adherence as well as ancillary benefits and detriments -- e.g., one method in this evolution demonstrated the ability to resolve and detect other species from the phenazine class. The second portion of the research focuses on the development of an HPLC method for the quantitative determination of NP size distributions. The current methodology for the determination of NP sizes employs tunneling electron microscopy (TEM), which requires sample drying without particle size alteration and which, in many cases, may prove infeasible due to cost or availability. The feasibility of an HPLC method for NP size characterizations evolved across three methods, each employing a different approach for size resolution. These methods were evaluated primarily for sensitivity, which proved to be a substantial hurdle to further development, but does not appear to deter future research efforts.

Efficiency of personal dosimetry methods in vascular interventional radiology.

PubMed

Bacchim Neto, Fernando Antonio; Alves, Allan Felipe Fattori; Mascarenhas, Yvone Maria; Giacomini, Guilherme; Maués, Nadine Helena Pelegrino Bastos; Nicolucci, Patrícia; de Freitas, Carlos Clayton Macedo; Alvarez, Matheus; Pina, Diana Rodrigues de

2017-05-01

The aim of the present study was to determine the efficiency of six methods for calculate the effective dose (E) that is received by health professionals during vascular interventional procedures. We evaluated the efficiency of six methods that are currently used to estimate professionals' E, based on national and international recommendations for interventional radiology. Equivalent doses on the head, neck, chest, abdomen, feet, and hands of seven professionals were monitored during 50 vascular interventional radiology procedures. Professionals' E was calculated for each procedure according to six methods that are commonly employed internationally. To determine the best method, a more efficient E calculation method was used to determine the reference value (reference E) for comparison. The highest equivalent dose were found for the hands (0.34±0.93mSv). The two methods that are described by Brazilian regulations overestimated E by approximately 100% and 200%. The more efficient method was the one that is recommended by the United States National Council on Radiological Protection and Measurements (NCRP). The mean and median differences of this method relative to reference E were close to 0%, and its standard deviation was the lowest among the six methods. The present study showed that the most precise method was the one that is recommended by the NCRP, which uses two dosimeters (one over and one under protective aprons). The use of methods that employ at least two dosimeters are more efficient and provide better information regarding estimates of E and doses for shielded and unshielded regions. Copyright © 2017 Associazione Italiana di Fisica Medica. Published by Elsevier Ltd. All rights reserved.

Specialized ADR To Settle Faculty Employment Disputes.

ERIC Educational Resources Information Center

DiNardo, Lawrence C.; Sherrill, John A.; Palmer, Anna R.

2001-01-01

Presents an innovative approach to resolution of faculty employment disputes at institutions of higher education. Discusses the framework in which faculty employment issues arise, the current state of alternative dispute resolution (ADR) as it is relevant to employment disputes, and the substantial benefits which could be achieved by developing a…

RETNA: Regional Employment and Training Needs Assessment Project.

ERIC Educational Resources Information Center

Coffey, Janis Cox

The Regional Employment and Training Needs Assessment (RETNA) project was organized to determine both current and projected employment and training needs in specific industries and occupations in the Sacramento area. The project involves the development of a prototypical computerized database developed from survey research on employment needs and…

Micropunching lithography for generating micro- and submicron-patterns on polymer substrates.

PubMed

Chakraborty, Anirban; Liu, Xinchuan; Luo, Cheng

2012-07-02

Conducting polymers have attracted great attention since the discovery of high conductivity in doped polyacetylene in 1977(1). They offer the advantages of low weight, easy tailoring of properties and a wide spectrum of applications(2,3). Due to sensitivity of conducting polymers to environmental conditions (e.g., air, oxygen, moisture, high temperature and chemical solutions), lithographic techniques present significant technical challenges when working with these materials(4). For example, current photolithographic methods, such as ultra-violet (UV), are unsuitable for patterning the conducting polymers due to the involvement of wet and/or dry etching processes in these methods. In addition, current micro/nanosystems mainly have a planar form(5,6). One layer of structures is built on the top surfaces of another layer of fabricated features. Multiple layers of these structures are stacked together to form numerous devices on a common substrate. The sidewall surfaces of the microstructures have not been used in constructing devices. On the other hand, sidewall patterns could be used, for example, to build 3-D circuits, modify fluidic channels and direct horizontal growth of nanowires and nanotubes. A macropunching method has been applied in the manufacturing industry to create macropatterns in a sheet metal for over a hundred years. Motivated by this approach, we have developed a micropunching lithography method (MPL) to overcome the obstacles of patterning conducting polymers and generating sidewall patterns. Like the macropunching method, the MPL also includes two operations (Fig. 1): (i) cutting; and (ii) drawing. The "cutting" operation was applied to pattern three conducting polymers(4), polypyrrole (PPy), Poly(3,4-ethylenedioxythiophen)-poly(4-styrenesulphonate) (PEDOT) and polyaniline (PANI). It was also employed to create Al microstructures(7). The fabricated microstructures of conducting polymers have been used as humidity(8), chemical(8), and glucose sensors(9). Combined microstructures of Al and conducting polymers have been employed to fabricate capacitors and various heterojunctions(9,10,11). The "cutting" operation was also applied to generate submicron-patterns, such as 100- and 500-nm-wide PPy lines as well as 100-nm-wide Au wires. The "drawing" operation was employed for two applications: (i) produce Au sidewall patterns on high density polyethylene (HDPE) channels which could be used for building 3D microsystems(12,13,14), and (ii) fabricate polydimethylsiloxane (PDMS) micropillars on HDPE substrates to increase the contact angle of the channel(15).

Metabolomics as a tool in the identification of dietary biomarkers.

PubMed

Gibbons, Helena; Brennan, Lorraine

2017-02-01

Current dietary assessment methods including FFQ, 24-h recalls and weighed food diaries are associated with many measurement errors. In an attempt to overcome some of these errors, dietary biomarkers have emerged as a complementary approach to these traditional methods. Metabolomics has developed as a key technology for the identification of new dietary biomarkers and to date, metabolomic-based approaches have led to the identification of a number of putative biomarkers. The three approaches generally employed when using metabolomics in dietary biomarker discovery are: (i) acute interventions where participants consume specific amounts of a test food, (ii) cohort studies where metabolic profiles are compared between consumers and non-consumers of a specific food and (iii) the analysis of dietary patterns and metabolic profiles to identify nutritypes and biomarkers. The present review critiques the current literature in terms of the approaches used for dietary biomarker discovery and gives a detailed overview of the currently proposed biomarkers, highlighting steps needed for their full validation. Furthermore, the present review also evaluates areas such as current databases and software tools, which are needed to advance the interpretation of results and therefore enhance the utility of dietary biomarkers in nutrition research.

SIMPLIFIED PRACTICAL TEST METHOD FOR PORTABLE DOSE METERS USING SEVERAL SEALED RADIOACTIVE SOURCES.

PubMed

Mikamoto, Takahiro; Yamada, Takahiro; Kurosawa, Tadahiro

2016-09-01

Sealed radioactive sources which have small activity were employed for the determination of response and tests for non-linearity and energy dependence of detector responses. Close source-to-detector geometry (at 0.3 m or less) was employed to practical tests for portable dose meters to accumulate statistically sufficient ionizing currents. Difference between response in the present experimentally studied field and in the reference field complied with ISO 4037 due to non-uniformity of radiation fluence at close geometry was corrected by use of Monte Carlo simulation. As a consequence, corrected results were consistent with the results obtained in the ISO 4037 reference field within their uncertainties. © The Author 2016. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Structures with high number density of carbon nanotubes and 3-dimensional distribution

NASA Technical Reports Server (NTRS)

Chen, Zheng (Inventor); Tzeng, Yonhua (Inventor)

2002-01-01

A composite is described having a three dimensional distribution of carbon nanotubes. The critical aspect of such composites is a nonwoven network of randomly oriented fibers connected at their junctions to afford macropores in the spaces between the fibers. A variety of fibers may be employed, including metallic fibers, and especially nickel fibers. The composite has quite desirable properties for cold field electron emission applications, such as a relatively low turn-on electric field, high electric field enhancement factors, and high current densities. The composites of this invention also show favorable properties for other an electrode applications. Several methods, which also have general application in carbon nanotube production, of preparing these composites are described and employ a liquid feedstock of oxyhydrocarbons as carbon nanotube precursors.

Why do they fail? A qualitative follow up study of 1000 recruits to the British Army Infantry to understand high levels of attrition.

PubMed

Kiernan, Matthew D; Repper, Julie; Arthur, Antony

2015-01-01

The British Army has over 100 career employment groups to which recruits may apply. The Infantry is one of these career employment groups; it accounts for 25% of the overall strength. It is of concern that Infantry recruit attrition within the first 12 weeks of training remains consistently above 30% . Poor selection methods that lead to the enlistment of unsuitable recruits have negative financial and personal consequences, but little is known about the personal experiences of those who fail. The aim of this research was to understand why infantry recruits choose to leave and explore the personal experiences of those that fail. This study draws on qualitative data from the second phase of a larger mixed method study. The foci of this paper are the findings directly related to the responses of recruits in exit interviews and their Commanding Officers' training reports. An exploratory qualitative, inductive method was used to generate insights, explanations and potential solutions to training attrition. What the data describes is a journey of extreme situational demands that the recruits experience throughout their transition from civilian life to service in the British Infantry. It is the cumulative effect of the stressors, combined with the recruit being dislocated from their established support network, which appears to be the catalyst for failure among recruits. There are clearly defined areas where either further research or changes to current practice may provide a better understanding of, and ultimately reduce, the current attrition rates experienced by the Infantry Training Centre.

Reducing Sweeping Frequencies in Microwave NDT Employing Machine Learning Feature Selection

PubMed Central

Moomen, Abdelniser; Ali, Abdulbaset; Ramahi, Omar M.

2016-01-01

Nondestructive Testing (NDT) assessment of materials’ health condition is useful for classifying healthy from unhealthy structures or detecting flaws in metallic or dielectric structures. Performing structural health testing for coated/uncoated metallic or dielectric materials with the same testing equipment requires a testing method that can work on metallics and dielectrics such as microwave testing. Reducing complexity and expenses associated with current diagnostic practices of microwave NDT of structural health requires an effective and intelligent approach based on feature selection and classification techniques of machine learning. Current microwave NDT methods in general based on measuring variation in the S-matrix over the entire operating frequency ranges of the sensors. For instance, assessing the health of metallic structures using a microwave sensor depends on the reflection or/and transmission coefficient measurements as a function of the sweeping frequencies of the operating band. The aim of this work is reducing sweeping frequencies using machine learning feature selection techniques. By treating sweeping frequencies as features, the number of top important features can be identified, then only the most influential features (frequencies) are considered when building the microwave NDT equipment. The proposed method of reducing sweeping frequencies was validated experimentally using a waveguide sensor and a metallic plate with different cracks. Among the investigated feature selection techniques are information gain, gain ratio, relief, chi-squared. The effectiveness of the selected features were validated through performance evaluations of various classification models; namely, Nearest Neighbor, Neural Networks, Random Forest, and Support Vector Machine. Results showed good crack classification accuracy rates after employing feature selection algorithms. PMID:27104533

Simplified welding distortion analysis for fillet welding using composite shell elements

NASA Astrophysics Data System (ADS)

Kim, Mingyu; Kang, Minseok; Chung, Hyun

2015-09-01

This paper presents the simplified welding distortion analysis method to predict the welding deformation of both plate and stiffener in fillet welds. Currently, the methods based on equivalent thermal strain like Strain as Direct Boundary (SDB) has been widely used due to effective prediction of welding deformation. Regarding the fillet welding, however, those methods cannot represent deformation of both members at once since the temperature degree of freedom is shared at the intersection nodes in both members. In this paper, we propose new approach to simulate deformation of both members. The method can simulate fillet weld deformations by employing composite shell element and using different thermal expansion coefficients according to thickness direction with fixed temperature at intersection nodes. For verification purpose, we compare of result from experiments, 3D thermo elastic plastic analysis, SDB method and proposed method. Compared of experiments results, the proposed method can effectively predict welding deformation for fillet welds.

Valley-polarized quantum transport generated by gauge fields in graphene

NASA Astrophysics Data System (ADS)

Settnes, Mikkel; Garcia, Jose H.; Roche, Stephan

2017-09-01

We report on the possibility to simultaneously generate in graphene a bulk valley-polarized dissipative transport and a quantum valley Hall effect by combining strain-induced gauge fields and real magnetic fields. Such unique phenomenon results from a ‘resonance/anti-resonance’ effect driven by the superposition/cancellation of superimposed gauge fields which differently affect time reversal symmetry. The onset of a valley-polarized Hall current concomitant to a dissipative valley-polarized current flow in the opposite valley is revealed by a {{e}2}/h Hall conductivity plateau. We employ efficient linear scaling Kubo transport methods combined with a valley projection scheme to access valley-dependent conductivities and show that the results are robust against disorder.

The Pot Calling the Kettle Black? A Comparison of Measures of Current Tobacco Use

PubMed Central

ROSENMAN, ROBERT

2014-01-01

Researchers often use the discrepancy between self-reported and biochemically assessed active smoking status to argue that self-reported smoking status is not reliable, ignoring the limitations of biochemically assessed measures and treating it as the gold standard in their comparisons. Here, we employ econometric techniques to compare the accuracy of self-reported and biochemically assessed current tobacco use, taking into account measurement errors with both methods. Our approach allows estimating and comparing the sensitivity and specificity of each measure without directly observing true smoking status. The results, robust to several alternative specifications, suggest that there is no clear reason to think that one measure dominates the other in accuracy. PMID:25587199

SOME EXPERIMENTS ON THE TURBULENCE AND MUTUAL FRICTION IN LIQUID HELIUM (in French)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kramers, H.C.

1962-05-01

Recent experiments on the hydrodynamic properties of liquid helium II, performed in the Kamerlingh Onnes Laboratorium (Leiden), are discussed on the basis of the twofluid model. Staas and Taconis measured temperature and pressure gradients occurring in a narrow circular capillary in the presence of a heat current. They discovered a turbulent phenomenon, very analogous to ordinary classical turbulence. The attenuation of second sound was studied by Wiarda and the present author in its dependence on a simultaneous continuous heat current. The method employed proves to be very suitable for a study of the so-called mutual friction and of phenomena occurringmore » in the critical velocity region. (auth)« less

Generation of Ramped Current Profiles in Relativistic Electron Beams Using Wakefields in Dielectric Structures

DOE PAGES

Andonian, G.; Barber, S.; O’Shea, F. H.; ...

2017-02-03

We show that temporal pulse tailoring of charged-particle beams is essential to optimize efficiency in collinear wakefield acceleration schemes. In this Letter, we demonstrate a novel phase space manipulation method that employs a beam wakefield interaction in a dielectric structure, followed by bunch compression in a permanent magnet chicane, to longitudinally tailor the pulse shape of an electron beam. This compact, passive, approach was used to generate a nearly linearly ramped current profile in a relativistic electron beam experiment carried out at the Brookhaven National Laboratory Accelerator Test Facility. Here, we report on these experimental results including beam and wakefieldmore » diagnostics and pulse profile reconstruction techniques.« less

New Fraction Time Annealing Method For Improving Organic Light Emitting Diode Current Stability of Hydorgenated Amorphous Silicon Thin-Film Transistor Based Active Matrix Organic Light Emitting Didode Backplane

NASA Astrophysics Data System (ADS)

Lee, Jae-Hoon; Park, Sang-Geun; Jeon, Jae-Hong; Goh, Joon-chul; Huh, Jong-moo; Choi, Joonhoo; Chung, Kyuha; Han, Min-Koo

2007-03-01

We propose and fabricate a new hydrogenated amorphous silicon (a-Si:H) thin-film transistor (TFT) pixel employing a fraction time annealing (FTA), which can supply a negative gate bias during a fraction time of each frame rather than the entire whole frame, in order to improve the organic light emitting diode (OLED) current stability for an active matrix (AM) OLED. When an electrical bias for an initial reference current of 2 μA at 60 °C is applied to an FTA-driven pixel more than 100 h and the temperature is increased up to 60 °C rather than room temperature, the OLED current is reduced by 22% in the FTA-driven pixel, whereas it is reduced by 53% in a conventional pixel. The current stability of the proposed pixel is improved, because the applied negative bias can suppress the threshold voltage degradation of the a-Si:H TFT itself, which may be attributed to hole trapping into SiNx. The proposed fraction time annealing method can successfully suppress Vth shift of the a-Si:H TFT itself due to hole trapping into SiNx induced by negative gate bias annealing.

Association between employment status change and depression in Korean adults

PubMed Central

Park, Eun-Cheol; Jang, Suk-Yong; Kwon, Jeoung A; Kim, Sun Jung; Cho, Kyoung-hee; Choi, Jae-Woo; Kim, Jae-Hyun; Park, Sohee

2016-01-01

Objectives This study investigated the association between employment status and depression. Methods Data from the Korea Welfare Panel Study (KOWEPS) collected from 2008 to 2011 were used. A total of 7368 subjects were included in this study after exclusion of subjects with missing data and those who were self-employed or could not work. Depression was assessed using the Center for Epidemiologic Studies Depression Scale (CES-D). Employment status, age, sex, region, education, marital status, income, head of household, self-rated health, smoking status, drinking habits, and the current year's and the previous year's CES-D scores were included in the model as independent variables. A generalised linear mixed-effects model for longitudinal binary data was used. Results Compared with those who were permanently employed, individuals who moved from permanent to precarious employment (OR 1.45, 95% CI 1.23 to 1.70) or to unemployment (OR 1.78, 95% CI 1.30 to 2.43) and from precarious employment to unemployment (OR 1.65, 95% CI 1.32 to 2.06) showed a significantly increased the odds of having depression. Continuing precarious employment (OR 1.54, 95% CI 1.30 to 1.83) or unemployment (OR 1.45, 95% CI 1.23 to 1.70) also significantly increased the odds of having depression. These results were particularly identified in men and head of household women. The effects were not significant among non-head of household women. Conclusions Precarious employment and unemployment were clearly associated with having depression. In addition, in view of our findings, policy makers should consider sex and head of household status when developing welfare policies. The inequity between precarious jobs and permanent jobs should be tackled. PMID:26932136

Characterization and measurement of natural gas trace constituents. Volume 1. Arsenic. Final report, June 1989-October 1993

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chao, S.S.; Attari, A.

1995-01-01

The discovery of arsenic compounds, as alkylarsines, in natural gas prompted this research program to develop reliable measurement techniques needed to assess the efficiency of removal processes for these environmentally sensitive substances. These techniques include sampling, speciation, quantitation and on-line instrumental methods for monitoring the total arsenic concentration. The current program has yielded many products, including calibration standards, arsenic-specific sorbents, sensitive analytical methods and instrumentation. Four laboratory analytical methods have been developed and successfully employed for arsenic determination in natural gas. These methods use GC-AED and GC-MS instruments to speciate alkylarsines, and peroxydisulfate extraction with FIAS, special carbon sorbent withmore » XRF and an IGT developed sorbent with GFAA for total arsenic measurement.« less

Ethnographic methods for process evaluations of complex health behaviour interventions.

PubMed

Morgan-Trimmer, Sarah; Wood, Fiona

2016-05-04

This article outlines the contribution that ethnography could make to process evaluations for trials of complex health-behaviour interventions. Process evaluations are increasingly used to examine how health-behaviour interventions operate to produce outcomes and often employ qualitative methods to do this. Ethnography shares commonalities with the qualitative methods currently used in health-behaviour evaluations but has a distinctive approach over and above these methods. It is an overlooked methodology in trials of complex health-behaviour interventions that has much to contribute to the understanding of how interventions work. These benefits are discussed here with respect to three strengths of ethnographic methodology: (1) producing valid data, (2) understanding data within social contexts, and (3) building theory productively. The limitations of ethnography within the context of process evaluations are also discussed.

Method and system employing finite state machine modeling to identify one of a plurality of different electric load types

DOE Office of Scientific and Technical Information (OSTI.GOV)

Du, Liang; Yang, Yi; Harley, Ronald Gordon

A system is for a plurality of different electric load types. The system includes a plurality of sensors structured to sense a voltage signal and a current signal for each of the different electric loads; and a processor. The processor acquires a voltage and current waveform from the sensors for a corresponding one of the different electric load types; calculates a power or current RMS profile of the waveform; quantizes the power or current RMS profile into a set of quantized state-values; evaluates a state-duration for each of the quantized state-values; evaluates a plurality of state-types based on the powermore » or current RMS profile and the quantized state-values; generates a state-sequence that describes a corresponding finite state machine model of a generalized load start-up or transient profile for the corresponding electric load type; and identifies the corresponding electric load type.« less

Concordance Between Current Job and Usual Job in Occupational and Industry Groupings

PubMed Central

Luckhaupt, Sara E.; Cohen, Martha A.; Calvert, Geoffrey M.

2015-01-01

Objective To determine whether current job is a reasonable surrogate for usual job. Methods Data from the 2010 National Health Interview Survey were utilized to determine concordance between current and usual jobs for workers employed within the past year. Concordance was quantitated by kappa values for both simple and detailed industry and occupational groups. Good agreement is considered to be present when kappa values exceed 60. Results Overall kappa values ± standard errors were 74.5 ± 0.5 for simple industry, 72.4 ± 0.5 for detailed industry, 76.3 ± 0.4 for simple occupation, 73.7 ± 0.5 for detailed occupation, and 80.4 ± 0.6 for very broad occupational class. Sixty-five of 73 detailed industry groups and 78 of 81 detailed occupation groups evaluated had good agreement between current and usual jobs. Conclusions Current job can often serve as a reliable surrogate for usual job in epidemiologic studies. PMID:23969506

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kılıç, Emre, E-mail: emre.kilic@tum.de; Eibert, Thomas F.

An approach combining boundary integral and finite element methods is introduced for the solution of three-dimensional inverse electromagnetic medium scattering problems. Based on the equivalence principle, unknown equivalent electric and magnetic surface current densities on a closed surface are utilized to decompose the inverse medium problem into two parts: a linear radiation problem and a nonlinear cavity problem. The first problem is formulated by a boundary integral equation, the computational burden of which is reduced by employing the multilevel fast multipole method (MLFMM). Reconstructed Cauchy data on the surface allows the utilization of the Lorentz reciprocity and the Poynting's theorems.more » Exploiting these theorems, the noise level and an initial guess are estimated for the cavity problem. Moreover, it is possible to determine whether the material is lossy or not. In the second problem, the estimated surface currents form inhomogeneous boundary conditions of the cavity problem. The cavity problem is formulated by the finite element technique and solved iteratively by the Gauss–Newton method to reconstruct the properties of the object. Regularization for both the first and the second problems is achieved by a Krylov subspace method. The proposed method is tested against both synthetic and experimental data and promising reconstruction results are obtained.« less

Measurement of discharge using tracers

USGS Publications Warehouse

Kilpatrick, Frederick A.; Cobb, Ernest D.

1984-01-01

The development of fluorescent dyes and fluorometers that can measure these dyes at very low concentrations has made dye-dilution methods practical for measuring discharge. These methods are particularly useful for determining discharge under certain flow conditions that are unfavorable for current meter measurements. These include small streams, canals, and pipes where:Turbulence is excessive for current meter measurement but conducive to good mixing.Moving rocks and debris are damaging to any instruments placed in the flow.Cross-sectional areas or velocities are indeterminant or changing.There are some unsteady flows such as exist with storm-runoff events on small streams.The flow is physically inaccessible or unsafe.From a practical standpoint, such measurements are limited primarily to small streams due to excessively long channel mixing lengths required of larger streams. Very good accuracy can be obtained provided:Adequate mixing length and time are allowed.Careful field and laboratory techniques are employed.Dye losses are not significant.This manual describes the slug-injection and constant-rate injection methods of performing tracer-dilution measurements. Emphasis is on the use of fluorescent dyes as tracers and the equipment, field methods, and Laboratory procedures for performing such measurements. The tracer-velocity method is also briefly discussed.

Permanent magnet online magnetization performance analysis of a flux mnemonic double salient motor using an improved hysteresis model

NASA Astrophysics Data System (ADS)

Zhu, Xiaoyong; Quan, Li; Chen, Yunyun; Liu, Guohai; Shen, Yue; Liu, Hui

2012-04-01

The concept of the memory motor is based on the fact that the magnetization level of the AlNiCo permanent magnet in the motor can be regulated by a temporary current pulse and memorized automatically. In this paper, a new type of memory motor is proposed, namely a flux mnemonic double salient motor drive, which is particularly attractive for electric vehicles. To accurately analyze the motor, an improved hysteresis model is employed in the time-stepping finite element method. Both simulation and experimental results are given to verify the validity of the new method.

Methods to speed up the gain recovery of an SOA

NASA Astrophysics Data System (ADS)

Wang, Zhi; Wang, Yongjun; Meng, Qingwen; Zhao, Rui

2008-01-01

The semiconductor optical amplifiers (SOAs) are employed in all optical networking and all optical signal processing due to the excellent nonlinearity and high speed. The gain recovery time is the key parameter to describe the response speed of the SOA. The relationship between the gain dynamics and a few operation parameters is obtained in this article. A few simple formula and some simulations are demonstrated, from which, a few methods to improve the response speed of the SOA can be concluded as following, lengthening the active area, or lessening the cross area, increasing the injection current, increasing the probe power, operating with a CW holding beam.

Taenia asiatica: the Most Neglected Human Taenia and the Possibility of Cysticercosis

PubMed Central

2013-01-01

Not only Taenia solium and Taenia saginata, but also Taenia asiatica infects humans. The last species is not included in the evaluation of the specificity of the immunodiagnostic techniques for taeniasis/cysticercosis. There is currently no specific immunodiagnostic method for T. asiatica available. Therefore, due to the fact that molecular techniques (the only tool to distinguish the 3 Taenia species) are normally not employed in routine diagnostic methods, the 2 questions concerning T. asiatica (its definite geographic distribution and its ability to cause human cysticercosis), remain open, turning T. asiatica into the most neglected agent of human taeniasis-cysticercosis. PMID:23467406

Iterative procedures for space shuttle main engine performance models

NASA Technical Reports Server (NTRS)

Santi, L. Michael

1989-01-01

Performance models of the Space Shuttle Main Engine (SSME) contain iterative strategies for determining approximate solutions to nonlinear equations reflecting fundamental mass, energy, and pressure balances within engine flow systems. Both univariate and multivariate Newton-Raphson algorithms are employed in the current version of the engine Test Information Program (TIP). Computational efficiency and reliability of these procedures is examined. A modified trust region form of the multivariate Newton-Raphson method is implemented and shown to be superior for off nominal engine performance predictions. A heuristic form of Broyden's Rank One method is also tested and favorable results based on this algorithm are presented.

Post-"Psychological Contract" Violation: The Durability and Transferability of Employee Perceptions. The Case of TimTec.

ERIC Educational Resources Information Center

Pate, Judy; Malone, Charles

2000-01-01

Interviews with 20 employees 5 years after a factory closure explored pre- and postlayoff experiences and perceptions of current employers. The experience of the violation of the psychological contract affected perceptions of loyalty, commitment, and trust that were transferred to the current employer. (SK)

Determining the sample size required to establish whether a medical device is non-inferior to an external benchmark.

PubMed

Sayers, Adrian; Crowther, Michael J; Judge, Andrew; Whitehouse, Michael R; Blom, Ashley W

2017-08-28

The use of benchmarks to assess the performance of implants such as those used in arthroplasty surgery is a widespread practice. It provides surgeons, patients and regulatory authorities with the reassurance that implants used are safe and effective. However, it is not currently clear how or how many implants should be statistically compared with a benchmark to assess whether or not that implant is superior, equivalent, non-inferior or inferior to the performance benchmark of interest.We aim to describe the methods and sample size required to conduct a one-sample non-inferiority study of a medical device for the purposes of benchmarking. Simulation study. Simulation study of a national register of medical devices. We simulated data, with and without a non-informative competing risk, to represent an arthroplasty population and describe three methods of analysis (z-test, 1-Kaplan-Meier and competing risks) commonly used in surgical research. We evaluate the performance of each method using power, bias, root-mean-square error, coverage and CI width. 1-Kaplan-Meier provides an unbiased estimate of implant net failure, which can be used to assess if a surgical device is non-inferior to an external benchmark. Small non-inferiority margins require significantly more individuals to be at risk compared with current benchmarking standards. A non-inferiority testing paradigm provides a useful framework for determining if an implant meets the required performance defined by an external benchmark. Current contemporary benchmarking standards have limited power to detect non-inferiority, and substantially larger samples sizes, in excess of 3200 procedures, are required to achieve a power greater than 60%. It is clear when benchmarking implant performance, net failure estimated using 1-KM is preferential to crude failure estimated by competing risk models. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Network Analysis in Disorders of Consciousness: Four Problems and One Proposed Solution (Exponential Random Graph Models)

PubMed Central

Dell'Italia, John; Johnson, Micah A.; Vespa, Paul M.; Monti, Martin M.

2018-01-01

In recent years, the study of the neural basis of consciousness, particularly in the context of patients recovering from severe brain injury, has greatly benefited from the application of sophisticated network analysis techniques to functional brain data. Yet, current graph theoretic approaches, as employed in the neuroimaging literature, suffer from four important shortcomings. First, they require arbitrary fixing of the number of connections (i.e., density) across networks which are likely to have different “natural” (i.e., stable) density (e.g., patients vs. controls, vegetative state vs. minimally conscious state patients). Second, when describing networks, they do not control for the fact that many characteristics are interrelated, particularly some of the most popular metrics employed (e.g., nodal degree, clustering coefficient)—which can lead to spurious results. Third, in the clinical domain of disorders of consciousness, there currently are no methods for incorporating structural connectivity in the characterization of functional networks which clouds the interpretation of functional differences across groups with different underlying pathology as well as in longitudinal approaches where structural reorganization processes might be operating. Finally, current methods do not allow assessing the dynamics of network change over time. We present a different framework for network analysis, based on Exponential Random Graph Models, which overcomes the above limitations and is thus particularly well suited for clinical populations with disorders of consciousness. We demonstrate this approach in the context of the longitudinal study of recovery from coma. First, our data show that throughout recovery from coma, brain graphs vary in their natural level of connectivity (from 10.4 to 14.5%), which conflicts with the standard approach of imposing arbitrary and equal density thresholds across networks (e.g., time-points, subjects, groups). Second, we show that failure to consider the interrelation between network measures does lead to spurious characterization of both inter- and intra-regional brain connectivity. Finally, we show that Separable Temporal ERGM can be employed to describe network dynamics over time revealing the specific pattern of formation and dissolution of connectivity that accompany recovery from coma. PMID:29946293

Methods for a longitudinal quantitative outcome with a multivariate Gaussian distribution multi-dimensionally censored by therapeutic intervention.

PubMed

Sun, Wanjie; Larsen, Michael D; Lachin, John M

2014-04-15

In longitudinal studies, a quantitative outcome (such as blood pressure) may be altered during follow-up by the administration of a non-randomized, non-trial intervention (such as anti-hypertensive medication) that may seriously bias the study results. Current methods mainly address this issue for cross-sectional studies. For longitudinal data, the current methods are either restricted to a specific longitudinal data structure or are valid only under special circumstances. We propose two new methods for estimation of covariate effects on the underlying (untreated) general longitudinal outcomes: a single imputation method employing a modified expectation-maximization (EM)-type algorithm and a multiple imputation (MI) method utilizing a modified Monte Carlo EM-MI algorithm. Each method can be implemented as one-step, two-step, and full-iteration algorithms. They combine the advantages of the current statistical methods while reducing their restrictive assumptions and generalizing them to realistic scenarios. The proposed methods replace intractable numerical integration of a multi-dimensionally censored MVN posterior distribution with a simplified, sufficiently accurate approximation. It is particularly attractive when outcomes reach a plateau after intervention due to various reasons. Methods are studied via simulation and applied to data from the Diabetes Control and Complications Trial/Epidemiology of Diabetes Interventions and Complications study of treatment for type 1 diabetes. Methods proved to be robust to high dimensions, large amounts of censored data, low within-subject correlation, and when subjects receive non-trial intervention to treat the underlying condition only (with high Y), or for treatment in the majority of subjects (with high Y) in combination with prevention for a small fraction of subjects (with normal Y). Copyright © 2013 John Wiley & Sons, Ltd.

Rapid column heating method for subcritical water chromatography.

PubMed

Fogwill, Michael O; Thurbide, Kevin B

2007-01-19

A novel resistive heating method is presented for subcritical water chromatography (SWC) that provides higher column heating rates than those conventionally obtained from temperature-programmed gas chromatography (GC) convection ovens. Since the polarity of water reduces dramatically with increasing temperature, SWC employs column heating to achieve gradient elution. As such, the rate at which the mobile phase is heated directly impacts the magnitude of such gradients applied in SWC. Data from the current study demonstrate that the maximum column heating rate attainable in a typical SWC apparatus (i.e. using a GC convection oven) is around 10 degrees C/min, even at instrument oven settings of over three times this value. Conversely, by wrapping the separation column with ceramic insulation and a resistively heated wire, the column heating rates are increased five-fold. As a result, elution times can be greatly decreased in SWC employing gradients. Separations of standard alcohol test mixtures demonstrate that the retention time of the latest eluting component decreases by 35 to 50% using the prototype method. Additionally, solute retention times in this mode deviate by less than 1% RSD over several trials, which compares very well to those obtained using a conventional GC convection oven. Results suggest that the developed method can be a useful alternative heating technique in SWC.

Chapter 17: Residential Behavior Evaluation Protocol. The Uniform Methods Project: Methods for Determining Energy Efficiency Savings for Specific Measures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kurnik, Charles W.; Stewart, James; Todd, Annika

Residential behavior-based (BB) programs use strategies grounded in the behavioral and social sciences to influence household energy use. These may include providing households with real-time or delayed feedback about their energy use; supplying energy efficiency education and tips; rewarding households for reducing their energy use; comparing households to their peers; and establishing games, tournaments, and competitions. BB programs often target multiple energy end uses and encourage energy savings, demand savings, or both. Savings from BB programs are usually a small percentage of energy use, typically less than 5 percent. Utilities will continue to implement residential BB programs as large-scale, randomizedmore » control trials (RCTs); however, some are now experimenting with alternative program designs that are smaller scale; involve new communication channels such as the web, social media, and text messaging; or that employ novel strategies for encouraging behavior change (for example, Facebook competitions). These programs will create new evaluation challenges and may require different evaluation methods than those currently employed to verify any savings they generate. Quasi-experimental methods, however, require stronger assumptions to yield valid savings estimates and may not measure savings with the same degree of validity and accuracy as randomized experiments.« less

An oxygen radical absorbance capacity-like assay that directly quantifies the antioxidant's scavenging capacity against AAPH-derived free radicals.

PubMed

Kohri, Shunji; Fujii, Hirotada; Oowada, Shigeru; Endoh, Nobuyuki; Sueishi, Yoshimi; Kusakabe, Miku; Shimmei, Masashi; Kotake, Yashige

2009-03-15

A new method is proposed for the evaluation of oxygen radical absorbance capacity (ORAC). The current fluorescence-based ORAC assay (ORAC-FL) is an indirect method that monitors the antioxidant's ability to protect the fluorescent probe from free radical-mediated damage, and an azo-radical initiator, AAPH (2,2-azobis(2-amidinopropane) dihydrochloride), has been used as a thermal free radical source. The new ORAC assay employs a short in situ photolysis of AAPH to generate free radicals. The electron paramagnetic resonance (EPR) spin trapping method was employed to identify and quantify AAPH radicals. In the presence of antioxidant, the level of AAPH radicals was decreased, and ORAC-EPR values were calculated following a simple kinetic formulation. Alkyl-oxy radical was identified as the sole decomposition product from AAPH; therefore, we concluded that ORAC-FL is the assay equivalent to alkyl-oxy radical scavenging capacity measurement. ORAC-EPR results for several antioxidants and human serum indicated that the overall tendency is in agreement with ORAC-FL, but absolute values showed significant discrepancies. ORAC-EPR is a rapid and simple method that is especially suitable for thermally labile biological specimens because the sample heating is not required for free radical production.

An accurate online calibration system based on combined clamp-shape coil for high voltage electronic current transformers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Li, Zhen-hua; Li, Hong-bin; Zhang, Zhi

Electronic transformers are widely used in power systems because of their wide bandwidth and good transient performance. However, as an emerging technology, the failure rate of electronic transformers is higher than that of traditional transformers. As a result, the calibration period needs to be shortened. Traditional calibration methods require the power of transmission line be cut off, which results in complicated operation and power off loss. This paper proposes an online calibration system which can calibrate electronic current transformers without power off. In this work, the high accuracy standard current transformer and online operation method are the key techniques. Basedmore » on the clamp-shape iron-core coil and clamp-shape air-core coil, a combined clamp-shape coil is designed as the standard current transformer. By analyzing the output characteristics of the two coils, the combined clamp-shape coil can achieve verification of the accuracy. So the accuracy of the online calibration system can be guaranteed. Moreover, by employing the earth potential working method and using two insulating rods to connect the combined clamp-shape coil to the high voltage bus, the operation becomes simple and safe. Tests in China National Center for High Voltage Measurement and field experiments show that the proposed system has a high accuracy of up to 0.05 class.« less

Toward Mixed Method Evaluations of Scientific Visualizations and Design Process as an Evaluation Tool.

PubMed

Jackson, Bret; Coffey, Dane; Thorson, Lauren; Schroeder, David; Ellingson, Arin M; Nuckley, David J; Keefe, Daniel F

2012-10-01

In this position paper we discuss successes and limitations of current evaluation strategies for scientific visualizations and argue for embracing a mixed methods strategy of evaluation. The most novel contribution of the approach that we advocate is a new emphasis on employing design processes as practiced in related fields (e.g., graphic design, illustration, architecture) as a formalized mode of evaluation for data visualizations. To motivate this position we describe a series of recent evaluations of scientific visualization interfaces and computer graphics strategies conducted within our research group. Complementing these more traditional evaluations our visualization research group also regularly employs sketching, critique, and other design methods that have been formalized over years of practice in design fields. Our experience has convinced us that these activities are invaluable, often providing much more detailed evaluative feedback about our visualization systems than that obtained via more traditional user studies and the like. We believe that if design-based evaluation methodologies (e.g., ideation, sketching, critique) can be taught and embraced within the visualization community then these may become one of the most effective future strategies for both formative and summative evaluations.

Toward Mixed Method Evaluations of Scientific Visualizations and Design Process as an Evaluation Tool

PubMed Central

Jackson, Bret; Coffey, Dane; Thorson, Lauren; Schroeder, David; Ellingson, Arin M.; Nuckley, David J.

2017-01-01

In this position paper we discuss successes and limitations of current evaluation strategies for scientific visualizations and argue for embracing a mixed methods strategy of evaluation. The most novel contribution of the approach that we advocate is a new emphasis on employing design processes as practiced in related fields (e.g., graphic design, illustration, architecture) as a formalized mode of evaluation for data visualizations. To motivate this position we describe a series of recent evaluations of scientific visualization interfaces and computer graphics strategies conducted within our research group. Complementing these more traditional evaluations our visualization research group also regularly employs sketching, critique, and other design methods that have been formalized over years of practice in design fields. Our experience has convinced us that these activities are invaluable, often providing much more detailed evaluative feedback about our visualization systems than that obtained via more traditional user studies and the like. We believe that if design-based evaluation methodologies (e.g., ideation, sketching, critique) can be taught and embraced within the visualization community then these may become one of the most effective future strategies for both formative and summative evaluations. PMID:28944349

Pharmaceuticals in drinking water: local analysis of the problem and finding a solution through awareness.

PubMed

Leal, Julie Ehret; Thompson, Amy N; Brzezinski, Walter A

2010-01-01

To evaluate public awareness of pharmaceuticals in drinking water and to develop educational efforts to promote awareness in our community. A review of the literature was conducted to gain a full perspective of the current issue. Questionnaires, interviews, and website feedback were used to assess awareness of the problem and the most commonly used medication disposal methods. In addition, educational flyers were created to disseminate information to the public. The questionnaires were completed by a total of 96 respondents. Of respondents employed in health care, 72% had previous knowledge of pharmaceutical medications being found in our local (Charleston, SC) water supply, and of respondents not employed in health care, 54% had previous knowledge. For those with previous knowledge, 7% disposed of medications in the toilet or sink, 38% used the trash, and 36% used multiple methods. Of respondents indicating no previous knowledge, 3% disposed of medications in the toilet or sink, 35% used the trash, and 42% used multiple methods. Public awareness of pharmaceuticals in drinking water and educational efforts focusing on proper disposal of medications are essential in helping to reduce drinking water contamination.

Physiological processes non-linearly affect electrophysiological recordings during transcranial electric stimulation.

PubMed

Noury, Nima; Hipp, Joerg F; Siegel, Markus

2016-10-15

Transcranial electric stimulation (tES) is a promising tool to non-invasively manipulate neuronal activity in the human brain. Several studies have shown behavioral effects of tES, but stimulation artifacts complicate the simultaneous investigation of neural activity with EEG or MEG. Here, we first show for EEG and MEG, that contrary to previous assumptions, artifacts do not simply reflect stimulation currents, but that heartbeat and respiration non-linearly modulate stimulation artifacts. These modulations occur irrespective of the stimulation frequency, i.e. during both transcranial alternating and direct current stimulations (tACS and tDCS). Second, we show that, although at first sight previously employed artifact rejection methods may seem to remove artifacts, data are still contaminated by non-linear stimulation artifacts. Because of their complex nature and dependence on the subjects' physiological state, these artifacts are prone to be mistaken as neural entrainment. In sum, our results uncover non-linear tES artifacts, show that current techniques fail to fully remove them, and pave the way for new artifact rejection methods. Copyright © 2016 Elsevier Inc. All rights reserved.

A Secure Trust Establishment Scheme for Wireless Sensor Networks

PubMed Central

Ishmanov, Farruh; Kim, Sung Won; Nam, Seung Yeob

2014-01-01

Trust establishment is an important tool to improve cooperation and enhance security in wireless sensor networks. The core of trust establishment is trust estimation. If a trust estimation method is not robust against attack and misbehavior, the trust values produced will be meaningless, and system performance will be degraded. We present a novel trust estimation method that is robust against on-off attacks and persistent malicious behavior. Moreover, in order to aggregate recommendations securely, we propose using a modified one-step M-estimator scheme. The novelty of the proposed scheme arises from combining past misbehavior with current status in a comprehensive way. Specifically, we introduce an aggregated misbehavior component in trust estimation, which assists in detecting an on-off attack and persistent malicious behavior. In order to determine the current status of the node, we employ previous trust values and current measured misbehavior components. These components are combined to obtain a robust trust value. Theoretical analyses and evaluation results show that our scheme performs better than other trust schemes in terms of detecting an on-off attack and persistent misbehavior. PMID:24451471

Parallel excitation-emission multiplexed fluorescence lifetime confocal microscopy for live cell imaging

PubMed Central

Zhao, Ming; Li, Yu; Peng, Leilei

2014-01-01

We present a novel excitation-emission multiplexed fluorescence lifetime microscopy (FLIM) method that surpasses current FLIM techniques in multiplexing capability. The method employs Fourier multiplexing to simultaneously acquire confocal fluorescence lifetime images of multiple excitation wavelength and emission color combinations at 44,000 pixels/sec. The system is built with low-cost CW laser sources and standard PMTs with versatile spectral configuration, which can be implemented as an add-on to commercial confocal microscopes. The Fourier lifetime confocal method allows fast multiplexed FLIM imaging, which makes it possible to monitor multiple biological processes in live cells. The low cost and compatibility with commercial systems could also make multiplexed FLIM more accessible to biological research community. PMID:24921725

Laser-induced fluorescence imaging of bacteria

NASA Astrophysics Data System (ADS)

Hilton, Peter J.

1998-12-01

This paper outlines a method for optically detecting bacteria on various backgrounds, such as meat, by imaging their laser induced auto-fluorescence response. This method can potentially operate in real-time, which is many times faster than current bacterial detection methods, which require culturing of bacterial samples. This paper describes the imaging technique employed whereby a laser spot is scanned across an object while capturing, filtering, and digitizing the returned light. Preliminary results of the bacterial auto-fluorescence are reported and plans for future research are discussed. The results to date are encouraging with six of the eight bacterial strains investigated exhibiting auto-fluorescence when excited at 488 nm. Discrimination of these bacterial strains against red meat is shown and techniques for reducing background fluorescence discussed.

Silver Vanadium Phosphorous Oxide, Ag(2)VO(2)PO(4): Chimie Douce Preparation and Resulting Lithium Cell Electrochemistry.

PubMed

Kim, Young Jin; Marschilok, Amy C; Takeuchi, Kenneth J; Takeuchi, Esther S

2011-08-15

Recently, we have shown silver vanadium phosphorous oxide (Ag(2)VO(2)PO(4), SVPO) to be a promising cathode material for lithium based batteries. Whereas the first reported preparation of SVPO employed an elevated pressure, hydrothermal approach, we report herein a novel ambient pressure synthesis method to prepare SVPO, where our chimie douce preparation is readily scalable and provides material with a smaller, more consistent particle size and higher surface area relative to SVPO prepared via the hydrothermal method. Lithium electrochemical cells utilizing SVPO cathodes made by our new process show improved power capability under constant current and pulse conditions over cells containing cathode from SVPO prepared via the hydrothermal method.

Strain-Based Damage Determination Using Finite Element Analysis for Structural Health Management

NASA Technical Reports Server (NTRS)

Hochhalter, Jacob D.; Krishnamurthy, Thiagaraja; Aguilo, Miguel A.

2016-01-01

A damage determination method is presented that relies on in-service strain sensor measurements. The method employs a gradient-based optimization procedure combined with the finite element method for solution to the forward problem. It is demonstrated that strains, measured at a limited number of sensors, can be used to accurately determine the location, size, and orientation of damage. Numerical examples are presented to demonstrate the general procedure. This work is motivated by the need to provide structural health management systems with a real-time damage characterization. The damage cases investigated herein are characteristic of point-source damage, which can attain critical size during flight. The procedure described can be used to provide prognosis tools with the current damage configuration.

Welfare recipients’ involvement with child protective services after welfare reform

PubMed Central

Nam, Yunju; Meezan, William; Danziger, Sandra K.

2007-01-01

Objective This study identifies factors associated with child protective services (CPS) involvement among current and former welfare recipients after welfare reform legislation was passed in the US in 1996. Method Data come from the Women’s Employment Study, a longitudinal study of randomly selected welfare recipients living in a Michigan city in 1997 (N = 541). In order to identify risk factors for CPS involvement among current and former welfare recipients, multinomial logit analyses with 29 independent variables were employed on a trichotomous dependent variable: no CPS involvement, investigation only, and supervision by CPS after investigation. Results The relationship between work and involvement with CPS differs by work experience prior to welfare reform. As the percentage of months working after welfare reform increased, the risk of being investigated by CPS declined among those with prior work experience but the risk increased among those without prior work experience. However, work variables were not significant predictors of supervision by CPS after an initial investigation. Further, race, cohabitation, childhood welfare receipt, having a learning disability, having a large number of children, being newly divorced, living in a high problem neighborhood, and being convicted of a crime were associated with one’s probability of being either investigated or supervised by CPS. Conclusions These findings suggest that employment could have increased the stress levels of current or former welfare recipients without prior work experience to the point where they were prone to minor child rearing mistakes that resulted in a CPS investigation, but were not severe enough to warrant opening the case for supervision. Supports should be provided to welfare mothers who are prone to involvement with CPS; expansions in the childcare subsidy and a reduction or delay in work requirements might also help these families. PMID:17116329

Employment and work schedule are related to telomere length in women

PubMed Central

Parks, C G; DeRoo, L A; Miller, D B; McCanlies, E C; Cawthon, R M; Sandler, D P

2011-01-01

Objectives To examine the association of employment and work schedule with shorter DNA telomeres, a marker of cellular ageing and disease risk factor, and consider whether differences were related to health, behaviours and sociodemographic factors, or varied by stress levels or menopausal status. Methods This cross-sectional analysis of 608 women aged 35–74 in the Sister Study examined determinants of relative telomere length (rTL) measured by quantitative PCR in leucocyte DNA. Age-adjusted regression models estimated base pair (bp) rTL differences for current and lifetime schedule characteristics (ie, part-time, full-time or overtime hours; multiple jobs; irregular hours; shiftwork; work at night). Covariates included race, smoking, perceived stress, sleep, physical activity, health and menopausal status, education, marital status, live births, children under 18, measured body mass index and urinary stress hormones. Results Compared with non-employed women with moderate or substantial past work histories (n=190), those currently working full-time (n=247; median 40 h/week) had a shorter rTL, an age-adjusted difference of −329 bp (95% CI −110 to −548). Longer-duration full-time work was also associated with shorter rTL (age-adjusted difference of −472 bp, 95% CI −786 to −158 for 20+ vs 1–5 years). Findings were not explained by health and demographic covariates. However, rTL differences for working at least full-time were greater in women with higher stress and epinephrine levels. Conclusions Current and long-term full-time work were associated with shorter rTL, with differences of similar magnitude to smoking and history of heart disease or diabetes. Longitudinal data with specific stress measures are needed to further evaluate the impact of work schedule on rTL. PMID:21540175

Elevated inflammatory biomarkers during unemployment: modification by age and country in the UK

PubMed Central

Hughes, Amanda; McMunn, Anne; Bartley, Mel; Kumari, Meena

2015-01-01

Background There is raised risk of mortality following unemployment, and reviews have consistently found worse psychological health among the unemployed. Inflammation is increasingly implicated as a mediating factor relating stress to physical disease and is strongly linked to depression. Inflammation may, therefore, be implicated in processes associated with excess mortality and morbidity during unemployment. This study examined associations of unemployment with inflammatory markers among working-age men and women from England and Scotland. Methods Cross-sectional analyses using data from the Health Survey for England and the Scottish Health Survey collected between 1998 and 2010. Systemic inflammation was indexed by serum concentrations of C reactive protein (CRP) and fibrinogen, and compared between participants currently employed/self-employed, currently unemployed and other groups. Results CRP, fibrinogen and odds of CRP >3 mg/L were all significantly raised for the unemployed, as compared to the employed participants (eg, OR for CRP >3 mg/L=1.43, CI 1.15 to 1.78 N=23 025), following adjustment for age, gender, occupational social class, housing tenure, smoking, alcohol consumption, body mass index, long-term illness and depressive/anxiety symptoms. Strengths of associations varied considerably by both age and country/region, with effects mainly driven by participants aged ≥48 and participants from Scotland, which had comparatively high unemployment during this time. Conclusions Current unemployment is associated with elevated inflammatory markers using data from two large-scale, nationally representative UK studies. Effect modification by age suggests inflammation may be particularly involved in processes leading to ill-health among the older unemployed. Country/regional effects may suggest the relationship of unemployment with inflammation is strongly influenced by contextual factors, and/or reflect life course accumulation processes. PMID:25700535

Factors influencing Macao nurses' intention to leave current employment.

PubMed

Chan, Moon Fai; Luk, Andrew Leung; Leong, Sok Man; Yeung, Siu Ming; Van, Iat Kio

2009-03-01

To investigate factors associated with nurses' intention to leave current employment in Macao. The shortage of nursing staff and nurses voluntarily leaving their jobs has continued to be a problem affecting the delivery of health care all over the world. One way to alleviate this shortfall is via recruitment, but this is not always successful. Another way is to reduce the rate at which nurses voluntarily leave their work places. A descriptive survey was conducted and data were collected using a self-reported structured questionnaire. Nurses were recruited in the Health Bureau and one private hospital in Macao. The status of nurses' intention to leave current employment (yes vs. no) was the dependent variable and nurses' predisposing characteristics, organisational environments and five components on job satisfaction outcomes were independent variables. Of 426 nurses, 166 (39.0%) indicated an intention to leave current employment. The results showed that age (p < 0.001), work experience (p < 0.001), workplace (p = 0.015) and job satisfaction: pay and benefits (p < 0.001) were significant risk factors to predict nurses' intention to leave current employment. More than one-third of the nurses in Macao indicated an intention to leave current employment. This figure may be a cause of concern for the hospital management and highlights the need to implement strategies to improve the communication between nurses and the organisation, to enhance nurse job satisfaction and commitment to the organisation. Our findings outline some issues contributing to this problem and provide the nurse manager with information regarding specific influences on nurses' turnover in Macao. Given the complexity of issues outlined in this analysis, nurse managers should assist their nursing staff to deal with those influences, make efforts to address the nursing shortage that will require additional communications and recognise the needs and values of their staff and empower them to create a better work environment. As a consequence, their commitment to the organisation can be fostered.

Increased short circuit current in organic photovoltaic using high-surface area electrode based on ZnO nanowires decorated with CdTe quantum dots.

PubMed

Aga, R S; Gunther, D; Ueda, A; Pan, Z; Collins, W E; Mu, R; Singer, K D

2009-11-18

A photosensitized high-surface area transparent electrode has been employed to increase the short circuit current of a photovoltaic device with a blend of poly(3-hexylthiophene) (P3HT) and (6,6)-phenyl C61 butyric acid methyl ester (PCBM) as the active layer. This is achieved by directly growing ZnO nanowires on indium tin oxide (ITO) film via a physical vapor method. The nanowire surface is then decorated with CdTe quantum dots by pulsed electron-beam deposition (PED). The nanowires alone provided a 20-fold increase in the short circuit current under visible light illumination. This was further increased by a factor of approximately 1.5 by the photosensitization effect of CdTe, which has an optical absorption of up to 820 nm.