36 CFR Appendix A to Part 1234 - Minimum Security Standards for Level III Federal Facilities

Code of Federal Regulations, 2012 CFR

2012-07-01

... technology and blast standards. Immediate review of ongoing projects may generate savings in the... critical systems (alarm systems, radio communications, computer facilities, etc.) Required. Occupant... all exterior windows (shatter protection) Recommended. Review current projects for blast standards...

Violent Deaths Among Georgia Workers: An Examination of Suicides and Homicides by Occupation, 2006-2009.

PubMed

Lavender, Antionette; Ramirez-Irizarry, Viani; Bayakly, A Rana; Koplan, Carol; Bryan, J Michael

2016-11-01

Workers in certain occupations may be at an increased risk of a violent-related death such as homicide or suicide. The purpose of this study is to describe rates of violent deaths among Georgia workers by occupation, including cases occurring at work and outside of the workplace, and identify leading circumstances surrounding suicides and homicides for the occupations most at risk. Data from the 2006-2009 Georgia Violent Death Reporting System were used. Occupational text fields were recoded into 23 major occupation categories based on the 2010 Standard Occupational Classification system. Crude rates and standardized mortality ratios for violent deaths (suicides and homicides) were calculated by occupation among Georgia workers aged ≥16 years. The leading circumstances precipitating violent deaths among the high-risk occupations were described. Analyses were conducted during 2012-2013 and 2015. A total of 4,616 Georgia resident workers were victims of a violent death during 2006-2009. Of these deaths, 2,888 (62.6%) were suicides and 1,728 (37.4%) were homicides. Farming, fishing, and forestry occupations had the highest rate of violent deaths at 80.5 per 100,000 workers followed by construction and extraction occupations at 65.5 per 100,000. The most common suicide circumstances among workers were having a current depressed mood, a current mental health problem, and an intimate partner problem. Use of the Violent Death Reporting System provides a unique opportunity to explore violent deaths among workers. This analysis shows the need to ensure that workers have access to workplace and community-based suicide and violence prevention services. Copyright © 2016 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

76 FR 13620 - Opportunity to Partner; Testing of Patient Compartment Seating and Restraints to Proposed Test...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-14

... current or comparable pre-test or pre-standard seat, seat retention device, and occupant restraint and its... Partner; Testing of Patient Compartment Seating and Restraints to Proposed Test Standard Authority: 29 U.S... proposed ambulance component test standards. One such standard, AMD STANDARD 026--Seat, Seat Mount and...

Estimating Adolescent Risk for Hearing Loss Based on Data From a Large School-Based Survey

PubMed Central

Verschuure, Hans; van der Ploeg, Catharina P. B.; Brug, Johannes; Raat, Hein

2010-01-01

Objectives. We estimated whether and to what extent a group of adolescents were at risk of developing permanent hearing loss as a result of voluntary exposure to high-volume music, and we assessed whether such exposure was associated with hearing-related symptoms. Methods. In 2007, 1512 adolescents (aged 12–19 years) in Dutch secondary schools completed questionnaires about their music-listening behavior and whether they experienced hearing-related symptoms after listening to high-volume music. We used their self-reported data in conjunction with published average sound levels of music players, discotheques, and pop concerts to estimate their noise exposure, and we compared that exposure to our own “loosened” (i.e., less strict) version of current European safety standards for occupational noise exposure. Results. About half of the adolescents exceeded safety standards for occupational noise exposure. About one third of the respondents exceeded safety standards solely as a result of listening to MP3 players. Hearing symptoms that occurred after using an MP3 player or going to a discotheque were associated with exposure to high-volume music. Conclusions. Adolescents often exceeded current occupational safety standards for noise exposure, highlighting the need for specific safety standards for leisure-time noise exposure. PMID:20395587

Handwriting and Common Core State Standards: Teacher, Occupational Therapist, and Administrator Perceptions From New York State Public Schools.

PubMed

Collette, Debra; Anson, Kylie; Halabi, Nora; Schlierman, April; Suriner, Allison

Handwriting is the cornerstone of written performance and communication for school-age children. This mixed-methods study explored the impact of Common Core State Standards on handwriting instruction and its effects on perceptions regarding children's written responses in elementary school. Using surveys and interviews of elementary teachers, occupational therapists, and administrators in New York State public schools, we sought to understand current trends in handwriting instruction, changes in time spent on handwriting instruction in the classroom, supports offered to students who did not meet expectations for handwriting, and the impact of Common Core on children's written expression. Themes emerged revealing decreased handwriting instruction time and inconsistent use of handwriting instructional programs in the classroom after implementation of Common Core. Handwriting should be considered as a greater component in the foundational standards in Common Core. Occupational therapy services can support handwriting instruction implementation. Copyright © 2017 by the American Occupational Therapy Association, Inc.

Regulatory system reform of occupational health and safety in China.

PubMed

Wu, Fenghong; Chi, Yan

2015-01-01

With the explosive economic growth and social development, China's regulatory system of occupational health and safety now faces more and more challenges. This article reviews the history of regulatory system of occupational health and safety in China, as well as the current reform of this regulatory system in the country. Comprehensive, a range of laws, regulations and standards that promulgated by Chinese government, duties and responsibilities of the regulatory departments are described. Problems of current regulatory system, the ongoing adjustments and changes for modifying and improving regulatory system are discussed. The aim of reform and the incentives to drive forward more health and safety conditions in workplaces are also outlined.

Regulatory system reform of occupational health and safety in China

PubMed Central

WU, Fenghong; CHI, Yan

2015-01-01

With the explosive economic growth and social development, China’s regulatory system of occupational health and safety now faces more and more challenges. This article reviews the history of regulatory system of occupational health and safety in China, as well as the current reform of this regulatory system in the country. Comprehensive, a range of laws, regulations and standards that promulgated by Chinese government, duties and responsibilities of the regulatory departments are described. Problems of current regulatory system, the ongoing adjustments and changes for modifying and improving regulatory system are discussed. The aim of reform and the incentives to drive forward more health and safety conditions in workplaces are also outlined. PMID:25843565

78 FR 13325 - Proposed Information Collection; Comment Request; Research on Evacuating Persons With Mobility...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-27

... DEPARTMENT OF COMMERCE National Institute of Standards and Technology Proposed Information... Institute of Standards and Technology (NIST), Commerce. ACTION: Notice. SUMMARY: The Department of Commerce... how building occupants with mobility impairments currently evacuate multi-story buildings in the...

Universal precautions: an update.

PubMed

Gershon, R R; Karkashian, C; Felknor, S

1994-01-01

Universal precautions, the set of work practice recommendations designed to help minimize occupational exposure to bloodborne pathogens, have been shown to be effective. However, lack of compliance with these recommendations has been well documented, both before and after the enactment of the OSHA Bloodborne Pathogens Standard. Current issues, including occupationally acquired human immunodeficiency virus, percutaneous exposures and lack of compliance are discussed in this article.

[Electromagnetic hazards from electrosurgery--assessment of occupational exposure to electromagnetic field and currents induceed in the body].

PubMed

Gryz, Krzysztof; Karpowicz, Jolanta

2006-01-01

The investigation of the occupational exposure to electromagnetic fields from electrosurgery devices were done (according to the requirements of Polish Standard PN-T-06580:2002). The exposure was evaluated following the criteria established by occupational safety and health regulations. The measurements and evaluation of the currents flowing through the exposed workers body were also conducted following the method and criteria published by IEEE standard and European Directive 2004/40/EC. It was found that in the vicinity of electrosurgical devices, the area of electromagnetic fields to which only workers operating the source of field should be exposed can exist up to the distance of 70 cm from the active electrode and supplying cables. In the case when the cables are placed directly on the surgeon body or long duration of the daily exposure the overexposure of workers can appear (referring to Polish regulations). The current flowing through the arm of surgeon keeping the electrode with electric field of the maximum strength (app. 1000 V/m or higher) can exceed permissible value of 40 mA established by the Directive 2004/40/EC for contact current. The reduction of the surgeon exposure can be reached by the proper positioning of the cables supplying monopolar electrode or by the use of bipolar electrode.

Hacked off.

PubMed

1988-05-28

The new book on occupational health for nurses called Nurses At Risk written by [illegible word] Salvage, former Nursing Standard journalist and Rosemary Rogers, currently our Clinical News Editor, received widespread press coverage.

NASA Occupant Protection Standards Development

NASA Technical Reports Server (NTRS)

Somers, Jeffrey T.; Gernhardt, Michael A.; Lawrence, Charles

2011-01-01

Current National Aeronautics and Space Administration (NASA) occupant protection standards and requirements are based on extrapolations of biodynamic models, which were based on human tests performed under pre-Space Shuttle human flight programs where the occupants were in different suit and seat configurations than is expected for the Multi Purpose Crew Vehicle (MPCV) and Commercial Crew programs. As a result, there is limited statistical validity to the occupant protection standards. Furthermore, the current standards and requirements have not been validated in relevant spaceflight suit, seat configurations or loading conditions. The objectives of this study were to develop new standards and requirements for occupant protection and rigorously validate these new standards with sub-injurious human testing. To accomplish these objectives we began by determining which critical injuries NASA would like to protect for. We then defined the anthropomorphic test device (ATD) and the associated injury metrics of interest. Finally, we conducted a literature review of available data for the Test Device for Human Occupant Restraint New Technology (THOR-NT) ATD to determine injury assessment reference values (IARV) to serve as a baseline for further development. To better understand NASA s environment, we propose conducting sub-injurious human testing in spaceflight seat and suit configurations with spaceflight dynamic loads, with a sufficiently high number of subjects to validate no injury during nominal landing loads. In addition to validate nominal loads, the THOR-NT ATD will be tested in the same conditions as the human volunteers, allowing correlation between human and ATD responses covering the Orion nominal landing environment and commercial vehicle expected nominal environments. All testing will be conducted without the suit and with the suit to ascertain the contribution of the suit to human and ATD responses. In addition to the testing campaign proposed, additional data analysis is proposed to mine existing human injury and response data from other sources, including military volunteer testing, automotive Crash Injury Research Engineering Network (CIREN), and IndyCar impact and injury data. These data sources can allow a better extrapolation of the ATD responses to off-nominal conditions above the nominal range that can safely be tested. These elements will be used to develop injury risk functions for each of the injury metrics measured from the ATD. These risk functions would serve as the basis for the NASA standards. Finally, we propose defining standard test methodology for evaluating future spacecraft designs against the IARVs, including developing a star-rating system to allow crew safety comparisons between vehicles.

An overview of occupational health and safety in Australia.

PubMed

Smith, Derek Richard; Yamagata, Zentaro

2002-03-01

Australia is a developed country with a high standard of living, small population and large land area. Manufacturing is currently the largest economic contributor, although mining and agriculture are also significant industries. There are around 10 million employees in total, with retail trade and manufacturing being the largest employers. Manufacturing currently has the highest incidence of workplace injury, although around 5% of all Australian workers suffer from some kind of occupational disease or injury every year. Occupational Health and Safety (OHS) legislation is individually managed and enforced by the 8 states and territories. Training and registration for OHS professionals varies between the speciaities and usually requires a combination of academic qualifications and workplace experience. Non-medical personnel constitute a large proportion of OHS professionals in Australia.

Occurrence of lead-related symptoms below the current occupational safety and health act allowable blood lead levels.

PubMed

Rosenman, Kenneth D; Sims, Amy; Luo, Zhehui; Gardiner, Joseph

2003-05-01

To determine the occurrence of symptoms of lead toxicity at levels below the current allowable Occupational Safety and Health Act blood lead level of 50 micrograms/dL, standardized telephone interviews were conducted of individuals reported to a statewide laboratory-based surveillance system. Four hundred and ninety-seven, or 75%, of the eligible participants were interviewed. Gastrointestinal, musculoskeletal, and nervous system symptoms increased with increasing blood lead levels. Nervous, gastrointestinal, and musculoskeletal symptoms all began to be increased in individuals with blood leads between 30-39 micrograms/dL and possibly at levels as low as 25-30 micrograms/dL for nervous system symptoms. The results of this study of increased symptoms are consistent with and provide added weight to previous results showing subclinical changes in the neurologic and renal systems and sperm counts at blood lead levels currently allowed by the Occupational Safety and Health Act.

[History of occupational health physician and industrial safety and health law].

PubMed

Horie, Seichi

2013-10-01

In Japan, an employer of a workplace with 50 or more employees is legally required to assign an occupational health physician. The assignment rate in 2010 was reported as 87.0%. This policy started with the provision of "factory physician"in the Factory Law in 1938, then the Labour Standard Law stipulated "physician hygienist" in 1947, and finally the Industrial Safety and Health Law defined "occupational health physician" in 1972. In 1996, a revision of the law then required those physicians to complete training courses in occupational medicine, as designated by an ordinance. Historically, an on-site physician was expected to cure injuries and to prevent communicable diseases of factory workers. The means of occupational hygienic management by working environment measurements, etc., and of health management by health examinations, etc., were developed. Localized exhaust ventilation and personal protection equipment became widely utilized. Qualification systems for non-medical experts in occupational hygiene were structured, and relationships between employers and occupational health physicians were stipulated in the legislative documents. Currently, the Japan Medical Association and the University of Occupational and Environmental Health, Japan educate and train occupational health physicians, and the Japan Society for Occupational Health maintains a specialized board certification system for these physicians. In the future, additional efforts should be made to strengthen the expertise of occupational health physicians, to define and recognize the roles of non-medical experts in occupational hygiene, to incorporate occupational health services in small enterprises, to promote occupational health risk assessment in the workplace, and to reorganize the current legislation, amended repeatedly over the decades.

A Golden Ticket to Future Occupational and Environmental Health Monitoring

DTIC Science & Technology

2015-10-01

by the BE career field, an assessment of the regulatory monitoring requirements and current detection capabilities was critical . The next step in...research criteria due to the inability to predict the cost of production for these detection systems. Until a standardization of mass scale production...the health risk assessment process and is critical to keeping the base population safe from occupational and environmental exposures. The predominant

Excessive occupational heat exposure: a significant ergonomic challenge and health risk for current and future workers

PubMed Central

2014-01-01

Occupational heat exposure threatens the health of a worker not only when heat illness occurs but also when a worker’s performance and work capacity is impaired. Occupational contexts that involve hot and humid climatic conditions, heavy physical workloads and/or protective clothing create a strenuous and potentially dangerous thermal load for a worker. There are recognized heat prevention strategies and international thermal ergonomic standards to protect the worker. However, such standards have been developed largely in temperate western settings, and their validity and relevance is questionable for some geographical, cultural and socioeconomic contexts where the risk of excessive heat exposure can be high. There is evidence from low- and middle-income tropical countries that excessive heat exposure remains a significant issue for occupational health. Workers in these countries are likely to be at high risk of excessive heat exposure as they are densely populated, have large informal work sectors and are expected to experience substantial increases in temperature due to global climate change. The aim of this paper is to discuss current and future ergonomic risks associated with working in the heat as well as potential methods for maintaining the health and productivity of workers, particularly those most vulnerable to excessive heat exposure. PMID:25057350

Analysis of medical screening and surveillance in 21 Occupational Safety and Health Administration standards: support for a generic medical surveillance standard.

PubMed

Silverstein, M

1994-09-01

Twenty-one Occupational Safety and Health Act (OSHA) standards were identified which contain medical service provisions intended to help in the identification and control of harmful health effects of workplace exposures. The utility and effectiveness of these provisions have not previously been evaluated. All 21 standards were reviewed and assigned numerical scores for each of 24 potential medical program elements. Several of these elements were combined to calculate Quality Control, Screening Utility, and Surveillance Utility scores for each standard. Total scores varied greatly, suggesting a lack of consistency and uniformity which was even more obvious when the actual regulatory language was examined. The mean Quality score was only 26% of potential points. Seventeen of 21 standards received less than half the total possible Quality score. When arrayed on a two by two matrix only two standards scored above 50% for both Screening and Surveillance Utility. It was concluded that the medical service provisions in OSHA standards are lacking in consistency and coherence. Two major shortcomings are the lack of quality control elements and the absence of surveillance features which would permit medical program results to be utilized for prevention activities including the identification and control of workplace hazards. A generic occupational medical surveillance standard could address these current weaknesses. Elements of such a generic standard are proposed.

Prevalence Rates of Work Organization Characteristics Among Workers in the U.S.: Data From the 2010 National Health Interview Survey

PubMed Central

Alterman, Toni; Luckhaupt, Sara E.; Dahlhamer, James M.; Ward, Brian W.; Calvert, Geoffrey M.

2015-01-01

Background Surveillance is needed to capture work organization characteristics and to identify their trends. Methods Data from the 2010 National Health Interview Survey (NHIS) were used to calculate prevalence rates for four work organization characteristics (long work hours, non-standard work arrangements, temporary positions, and alternative shifts) overall, and by demographic characteristics, and industry and occupation of current/recent employment. Results Data were available for 27,157 adults, of which 65% were current/recent workers. Among adults who worked in the past 12 months, 18.7% worked 48 hr or more per week, 7.2% worked 60 hr or more per week, 18.7% had non-standard work arrangements, 7.2% were in temporary positions, and 28.7% worked an alternative shift. Conclusions Prevalence rates of work organization characteristics are provided. These national estimates can be used to help occupational health professionals and employers to identify emerging occupational safety and health risks, allow researchers to examine associations with health, and use the data for benchmarking. PMID:22911666

Curricular Inclusion of Complementary and Alternative Medicine Content in Occupational Therapy Education in the United States.

PubMed

Bradshaw, Michelle L

2016-10-01

An exploratory, cross-sectional survey design was used to explore the extent to which CAM was included, what factors impacted its inclusion, topics and student learning outcomes covered, who taught the material, and what sources were used to prepare for delivering course content. While the vast majority of responding occupational therapy educators reported curricular inclusion of CAM, educational experiences for occupational therapy students varied widely. This overview of the curricular inclusion of CAM by faculty in occupational therapy programs in the United States indicated that many occupational therapy educators are responding to the demands of a more integrative healthcare system. Resolving ethical and pragmatic issues, providing faculty development opportunities, and standardizing student learning outcomes would align all stakeholders and mitigate ambiguities that currently exist surrounding the inclusion of CAM in occupational therapy education.

Compliance with OSHA's respiratory protection standard in hospitals.

PubMed

Krishnan, U; Janicak, C A

1999-01-01

This study examined the incidence of violations of occupational safety and health standards for respiratory protection in hospitals. Data from Occupational Safety and Health Administration inspections that occurred in hospitals and resulted in violations of the respiratory protection standards were examined. From July 1, 1990, to June 30, 1995, the complaint rates for hazards in the workplace significantly increased. During 1990-1991, tuberculosis hazard complaint inspections rates were approximately 5 complaints per 1000 complaint inspections conducted. During 1994-1995, tuberculosis hazard complaint inspections rates were approximately 76 complaints per 1000 complaint inspections conducted, representing an increase of over 15 times. During this same period, the percentage of respiratory protection violations in relation to all violations doubled. Increased employee awareness of the hazards and current safety laws could have contributed to the increased frequency of employee complaints, leading to increases in inspections, violations, and fines. Employers must adhere to the current safety and health requirements specifically as they pertain to respiratory hazards and tuberculosis.

Environmental comfort as criteria for energy management: a case study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rhee, E.K.

This study is a field experiment aimed at evaluating environmental comfort by investigating the impact of different environmental conditions on the perceptions, behaviors and performance of building occupants. The development of a prediction model for thermal comfort and the determination of actual energy savings achieved by altering environmental conditions are other major goals of this study. The research approach is a case study applying a pretest-posttest experimental design. An office building in Ann Arbor is selected for the study. It represents a typical office building in terms of design, occupancy, building systems and environmental conditions, suggesting that the study resultsmore » may be applicable to other office settings. It was found that building occupants were satisfied with the pretest environmental conditions which were within the range of current comfort standards, and with the posttest conditions which were lower than current standards. Changes in environmental conditions had little effect on the occupants' perceptions, behavior and performance, although the changes achieved considerable energy savings during the heating season. Among the other major findings, it was demonstrated that psychological factors were more decisive than objective environmental conditions in determining thermal comfort. The study concludes that an energy management program in an office building that is based on 69/sup 0/F indoor temperature, 30% relative humidity, 10-15 cfm/person ventilation rate, 50 fc lighting level, and 105 F domestic hot water can save energy while maintaining environmental comfort among occupants.« less

Occupational risks for nasal cancer in Sweden.

PubMed

Hemelt, Marjolein; Granström, Charlotta; Hemminki, Kari

2004-10-01

An elevated risk of nasal cancer (NC) has been associated with numerous occupations but with contradicting results. We sought to address recent and current risks of NC in a nationwide study. The nationwide Swedish Family-Cancer Database was used to calculate standardized incidence ratios (SIRs) for 52 occupational groups. SIRs were adjusted for age and socioeconomic status. Among 739 male cases, significantly elevated SIRs for nasal adenocarcinoma were observed in woodworkers, teachers, and fishermen. In woodworkers, the risk increased with a longer occupational history in exposure to softwood in combination with hardwood. Electrical workers had a significant elevated risk for squamous cell carcinoma. Among 182 female cases, significantly elevated SIRs were observed in glass, ceramic, and tile workers. The study identified some known risk occupations and suggested some new ones.

Effect of the 2.0 mg/m3 coal mine dust standard on underground environmental dust levels.

PubMed

Parobeck

1975-08-01

The 1969 Federal Coal Mine Health and Safety Act established environmental dust standards for underground coal mines. The Act requires that the average concentration of respirable dust in the active workings of a mine be maintained at or below 3.0 mg/m3; and, that effective December 30, 1972, the 3.0 mg/m3 standard be reduced to 2.0 mg/m3. This paper discusses the current status of dust levels in our underground coal mines, the effect of the 2.0 mg/m3 standard on underground dust levels, and associates the current levels with specific operations and occupations. The comparison is made between current levels and those existing prior to December 30, 1972.

Complete Statistical Survey Results of 1982 Texas Competency Validation Project.

ERIC Educational Resources Information Center

Rogers, Sandra K.; Dahlberg, Maurine F.

This report documents a project to develop current statewide validated competencies for auto mechanics, diesel mechanics, welding, office occupations, and printing. Section 1 describes the four steps used in the current competency validation project and provides a standardized process for conducting future studies at the local or statewide level.…

Representation of occupational information across resources and validation of the occupational data for health model.

PubMed

Rajamani, Sripriya; Chen, Elizabeth S; Lindemann, Elizabeth; Aldekhyyel, Ranyah; Wang, Yan; Melton, Genevieve B

2018-02-01

Reports by the National Academy of Medicine and leading public health organizations advocate including occupational information as part of an individual's social context. Given recent National Academy of Medicine recommendations on occupation-related data in the electronic health record, there is a critical need for improved representation. The National Institute for Occupational Safety and Health has developed an Occupational Data for Health (ODH) model, currently in draft format. This study aimed to validate the ODH model by mapping occupation-related elements from resources representing recommendations, standards, public health reports and surveys, and research measures, along with preliminary evaluation of associated value sets. All 247 occupation-related items across 20 resources mapped to the ODH model. Recommended value sets had high variability across the evaluated resources. This study demonstrates the ODH model's value, the multifaceted nature of occupation information, and the critical need for occupation value sets to support clinical care, population health, and research. © The Author 2017. Published by Oxford University Press on behalf of the American Medical Informatics Association. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

New ANSI standard for thyroid phantom

DOE PAGES

Mallett, Michael W.; Bolch, Wesley E.; Fulmer, Philip C.; ...

2015-08-01

Here, a new ANSI standard titled “Thyroid Phantom Used in Occupational Monitoring” (Health Physics Society 2014) has been published. The standard establishes the criteria for acceptable design, fabrication, or modeling of a phantom suitable for calibrating in vivo monitoring systems to measure photon-emitting radionuclides deposited in the thyroid. The current thyroid phantom standard was drafted in 1973 (ANSI N44.3-1973), last reviewed in 1984, and a revision of the standard to cover a more modern approach was deemed warranted.

Health-Related Quality of Life Among US Workers: Variability Across Occupation Groups.

PubMed

Shockey, Taylor M; Zack, Matthew; Sussell, Aaron

2017-08-01

To examine the health-related quality of life among workers in 22 standard occupation groups using data from the 2013-2014 US Behavioral Risk Factor Surveillance System. We examined the health-related quality of life measures of self-rated health, frequent physical distress, frequent mental distress, frequent activity limitation, and frequent overall unhealthy days by occupation group for 155 839 currently employed adults among 17 states. We performed multiple logistic regression analyses that accounted for the Behavioral Risk Factor Surveillance System's complex survey design to obtain prevalence estimates adjusted for potential confounders. Among all occupation groups, the arts, design, entertainment, sports, and media occupation group reported the highest adjusted prevalence of frequent physical distress, frequent mental distress, frequent activity limitation, and frequent overall unhealthy days. The personal care and service occupation group had the highest adjusted prevalence for fair or poor self-rated health. Workers' jobs affect their health-related quality of life.

75 FR 76185 - Federal Motor Vehicle Safety Standard, Rearview Mirrors; Federal Motor Vehicle Safety Standard...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-07

... Simulation D. Comparative Regulatory Requirements i. Current FMVSS No. 111 ii. Relevant European Regulations... specifically-defined type of incident in which a non-occupant of a vehicle (most commonly, a pedestrian, but it...-speed vehicle or trailer, designed to carry 10 persons or less which is constructed either on a truck...

[Occupational exposure to silica dust by selected sectors of national economy in Poland based on electronic database].

PubMed

Bujak-Pietrek, Stella; Mikołajczyk, Urszula; Szadkowska-Stańczyk, Irena; Stroszejn-Mrowca, Grazyna

2008-01-01

To evaluate occupational exposure to dusts, the Nofer Institute of Occupational Medicine in Łódź, in collaboration with the Chief Sanitary Inspectorate, has developed the national database to store the results of routine dust exposure measurements performed by occupational hygiene and environmental protection laboratories in Poland in the years 2001-2005. It was assumed that the collected information will be useful in analyzing workers' exposure to free crystalline silica (WKK)-containing dusts in Poland, identyfing exceeded hygiene standards and showing relevant trends, which illustrate the dynamics of exposure in the years under study. Inhalable and respirable dust measurement using personal dosimetry were done according to polish standard PN-91/Z-04030/05 and PN-91/Z-04030/06. In total, 148 638 measurement records, provided by sanitary inspection services from all over Poland, were entered into the database. The database enables the estimation of occupational exposure to dust by the sectors of national economy, according to the Polish Classification of Activity (PKD) and by kinds of dust. The highest exposure level of inhalable and respirable dusts was found in coal mining. Also in this sector, almost 60% of surveys demonstrated exceeded current hygiene standards. High concentrations of both dust fractions (inhalable and respirable) and a considerable percentage of measurements exceeding hygiene standards were found in the manufacture of transport equipment (except for cars), as well as in the chemical, mining (rock, sand, gravel, clay mines) and construction industries. The highest percentage of surveys (inhalable and respirable dust) showing exceeded hygiene standards were observed for coal dust with different content of crystalline silica, organic dust containing more than 10% of SiO2, and highly fibrosis dust containing more than 50% of SiO2.

Wheelchair and Occupant Restraint on School Buses

DOT National Transportation Integrated Search

1990-05-01

This report presents the findings of a literature survey, wheelchair hardware survey, wheelchair usage on school buses survey and assessment of current worldwide standards to address securement of wheelchairs on school buses and other modes of public...

Toward risk reduction: predicting the future burden of occupational cancer.

PubMed

Hutchings, Sally; Rushton, Lesley

2011-05-01

Interventions to reduce cancers related to certain occupations should be evidence-based. The authors have developed a method for forecasting the future burden of occupational cancer to inform strategies for risk reduction. They project risk exposure periods, accounting for cancer latencies of up to 50 years, forward in time to estimate attributable fractions for a series of forecast target years given past and projected exposure trends and under targeted reduction scenarios. Adjustment factors for changes in exposed numbers and levels are applied in estimation intervals within the risk-exposure periods. The authors illustrate the methods by using a range of scenarios for reducing lung cancer due to occupational exposure to respirable crystalline silica. Attributable fractions for lung cancer due to respirable crystalline silica could be potentially reduced from 2.07% in 2010 to nearly 0% by 2060, depending on the timing and success of interventions. Focusing on achieving compliance with current exposure standards in small industries can be more effective than setting standards at a lower level. The method can be used to highlight high-risk carcinogens, industries, and occupations. It is adaptable for other countries and other exposure situations in the general environment and can be extended to include socioeconomic impact assessment.

Pelvic ring fractures: implications of vehicle design, crash type, and occupant characteristics.

PubMed

Rowe, Stephen A; Sochor, Mark S; Staples, Kurtis S; Wahl, Wendy L; Wang, Stewart C

2004-10-01

Pelvic ring fractures (PRFs) are a major cause of morbidity and mortality in motor vehicle collisions (MVCs). Understanding the factors leading to PRFs may help improve vehicle design and safety. This study sought to determine the vehicular, crash, and occupant characteristics that contribute to PRFs. From 1997 to 2003, 240 adult patients involved in lateral or frontal crashes were prospectively studied. Comprehensive crash reconstructions, vehicle analysis, and occupant data were compiled and analyzed as part of the national Crash Injury Research Engineering Network project. Of 240 study patients, 38 had PRFs. The incidence of PRFs was significantly associated with female gender, lateral impact crashes, vehicle incompatibility, and severity of crash. Seat belts and airbags were not protective against PRFs in either lateral or frontal crashes. All vehicles in the current study were less than 6 years old at the time of the MVC and thus reflect newer safety designs. Compared with studies of PRFs in MVCs before the widespread adoption of modern safety standards, our series suggests there has been a modest decrease in the incidence of PRFs in newer vehicles. Current safety standards do not adequately protect against PRFs, especially in lateral MVCs involving incompatibility and female occupants. New technology needs to be developed and implemented. Our data suggest that side impact airbags, alteration of vehicle geometry, and increased reinforcement of side panels and doors may result in fewer PRFs.

Proceedings from the 2001 NASA Occupational Health Conference: Risk Assessment and Management in 2001

NASA Technical Reports Server (NTRS)

Roberson, Sheri (Editor); Kelly, Bruce (Editor); Gettleman, Alan G. (Technical Monitor)

2001-01-01

This Conference convened approximately 86 registered participants of invited guest speakers, NASA presenters, and a broad spectrum of the Occupational Health disciplines representing NASA Headquarters and all NASA Field Centers. Two days' Professional Development Courses on Exposure Assessment Strategies and Statistics and on Advanced Cardiac Life Support training and recertification preceded the Conference. With the theme, 'Risk Assessment and Management in 2001,' conferees were first provided updates from the Program Principal Center Office and the Headquarters Office. Plenary sessions elaborated on several topics: biological terrorism, OSHA recordability, Workers' Compensation issues, Federal ergonomic standards, bridging aerospace medicine and occupational health-especially in management of risk in spaceflight, and EAP operations with mission failures. A keynote address dealt with resiliency skills for 21st century workers and two NASA astronaut speakers highlighted a tour of the Johnson Space Center. During discipline specific breakout sessions, current issues in occupational health management and policy, credentialing and privileging, health risk assessment, measurement and standardization, audits, database development, prevention and rehabilitation, international travel and infection control, employee assistance, nursing process, and environmental health were presented.

48 CFR 1352.271-82 - Department of Labor occupational safety and health standards for ship repair.

Code of Federal Regulations, 2014 CFR

2014-10-01

... occupational safety and health standards for ship repair. 1352.271-82 Section 1352.271-82 Federal Acquisition... of Provisions and Clauses 1352.271-82 Department of Labor occupational safety and health standards... Occupational Safety and Health Standards for Ship Repair (APR 2010) The contractor, in performance of all work...

48 CFR 1352.271-82 - Department of Labor occupational safety and health standards for ship repair.

Code of Federal Regulations, 2011 CFR

2011-10-01

... occupational safety and health standards for ship repair. 1352.271-82 Section 1352.271-82 Federal Acquisition... of Provisions and Clauses 1352.271-82 Department of Labor occupational safety and health standards... Occupational Safety and Health Standards for Ship Repair (APR 2010) The contractor, in performance of all work...

48 CFR 1352.271-82 - Department of Labor occupational safety and health standards for ship repair.

Code of Federal Regulations, 2013 CFR

2013-10-01

... occupational safety and health standards for ship repair. 1352.271-82 Section 1352.271-82 Federal Acquisition... of Provisions and Clauses 1352.271-82 Department of Labor occupational safety and health standards... Occupational Safety and Health Standards for Ship Repair (APR 2010) The contractor, in performance of all work...

48 CFR 1352.271-82 - Department of Labor occupational safety and health standards for ship repair.

Code of Federal Regulations, 2012 CFR

2012-10-01

... occupational safety and health standards for ship repair. 1352.271-82 Section 1352.271-82 Federal Acquisition... of Provisions and Clauses 1352.271-82 Department of Labor occupational safety and health standards... Occupational Safety and Health Standards for Ship Repair (APR 2010) The contractor, in performance of all work...

48 CFR 1352.271-82 - Department of Labor occupational safety and health standards for ship repair.

Code of Federal Regulations, 2010 CFR

2010-10-01

... occupational safety and health standards for ship repair. 1352.271-82 Section 1352.271-82 Federal Acquisition... of Provisions and Clauses 1352.271-82 Department of Labor occupational safety and health standards... Occupational Safety and Health Standards for Ship Repair (APR 2010) The contractor, in performance of all work...

Minimum standards on prevention, diagnosis and treatment of occupational and work-related skin diseases in Europe - position paper of the COST Action StanDerm (TD 1206).

PubMed

Alfonso, J H; Bauer, A; Bensefa-Colas, L; Boman, A; Bubas, M; Constandt, L; Crepy, M N; Goncalo, M; Macan, J; Mahler, V; Mijakoski, D; Ramada Rodilla, J M; Rustemeyer, T; Spring, P; John, S M; Uter, W; Wilkinson, M; Giménez-Arnau, A M

2017-06-01

Skin diseases constitute up to 40% of all notified occupational diseases in most European countries, predominantly comprising contact dermatitis, contact urticaria, and skin cancer. While insufficient prevention of work-related skin diseases (WRSD) is a top-priority problem in Europe, common standards for prevention of these conditions are lacking. To develop common European standards on prevention and management of WRSD and occupational skin diseases (OSD). Consensus amongst experts within occupational dermatology was achieved with regard to the definition of minimum evidence-based standards on prevention and management of WRSD/OSD. By definition, WRSDs/OSDs are (partially or fully) caused by occupational exposure. The definition of OSD sensu stricto additionally includes diverging national legal requirements, with an impact on registration, prevention, management, and compensation. With the implementation of the classification of WRSD/OSD in the International Classification of Diseases (ICD) 11th Revision in future, a valid surveillance and comparability across countries will be possible. Currently, WRDS and OSD are still under-reported. Depending on legislation and regulations, huge differences exist in notification procedures in Europe, although notification is crucial to prevent chronic and relapsing disease. Facilities for early diagnosis, essential for individual patient management, should be based on existing guidelines and include a multidisciplinary approach. Patch testing is essential if contact dermatitis persists or relapses. Workplace exposure assessment of WRSD/OSD requires full labelling of product ingredients on material safety data sheets helping to identify allergens, irritants and skin carcinogens. Comparable standards in primary, secondary and tertiary prevention must be established in Europe to reduce the burden of WRSD/OSD in Europe. The adoption of common European standards on prevention of WRSD/OSD will contribute to reduce the incidence of OSD and their socio-economic burden. © 2017 European Academy of Dermatology and Venereology.

Occupational exposures to human immunodeficiency virus, hepatitis B virus, and hepatitis C virus: risk, prevention, and management.

PubMed

Cleveland, Jennifer L; Cardo, Denise M

2003-10-01

Current data indicate that the risk for transmitting bloodborne pathogens in dental health care settings is low. Pre-exposure hepatitis B vaccination and the use of standard precautions to prevent exposure to blood are the most effective strategies for preventing DHCP from occupational infection with HIV, HBV or HCV. Each dental health care facility should develop a comprehensive written program for preventing and managing occupational exposures to blood that: (1) describes the types of blood exposures that may place DHCP at risk for infection; (2) outlines procedures for promptly reporting and evaluating such exposures; and (3) identifies a health care professional who is qualified to provide counseling and perform all medical evaluations and procedures in accordance with the most current USPHS recommendations. Finally, resources should be available that permit rapid access to clinical care, testing, counseling, and PEP for exposed DHCP and the testing and counseling of source patients.

29 CFR 1910.5 - Applicability of standards.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS General § 1910.5 Applicability of standards. (a) Except as provided in... enforce standards or regulations affecting occupational safety or health. (c)(1) If a particular standard...

29 CFR 1910.5 - Applicability of standards.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS General § 1910.5 Applicability of standards. (a) Except as provided in... enforce standards or regulations affecting occupational safety or health. (c)(1) If a particular standard...

Developing Asbestos Job Exposure Matrix Using Occupation and Industry Specific Exposure Data (1984-2008) in Republic of Korea.

PubMed

Choi, Sangjun; Kang, Dongmug; Park, Donguk; Lee, Hyunhee; Choi, Bongkyoo

2017-03-01

The goal of this study is to develop a general population job-exposure matrix (GPJEM) on asbestos to estimate occupational asbestos exposure levels in the Republic of Korea. Three Korean domestic quantitative exposure datasets collected from 1984 to 2008 were used to build the GPJEM. Exposure groups in collected data were reclassified based on the current Korean Standard Industrial Classification (9 th edition) and the Korean Standard Classification of Occupations code (6 th edition) that is in accordance to international standards. All of the exposure levels were expressed by weighted arithmetic mean (WAM) and minimum and maximum concentrations. Based on the established GPJEM, the 112 exposure groups could be reclassified into 86 industries and 74 occupations. In the 1980s, the highest exposure levels were estimated in "knitting and weaving machine operators" with a WAM concentration of 7.48 fibers/mL (f/mL); in the 1990s, "plastic products production machine operators" with 5.12 f/mL, and in the 2000s "detergents production machine operators" handling talc containing asbestos with 2.45 f/mL. Of the 112 exposure groups, 44 groups had higher WAM concentrations than the Korean occupational exposure limit of 0.1 f/mL. The newly constructed GPJEM which is generated from actual domestic quantitative exposure data could be useful in evaluating historical exposure levels to asbestos and could contribute to improved prediction of asbestos-related diseases among Koreans.

Future preparation of occupational health nurse managers.

PubMed

Scalzi, C C; Wilson, D L; Ebert, R

1991-03-01

This article presents the results of a national survey of job activities of corporate level occupational health nurse managers. The survey was designed to identify the relative amount of time spent and importance attributed to specific areas of their current job. In general this sample tended to have more management experience and educational preparation than previously cited studies: over 50% had completed a graduate degree. The scores for importance and time spent were highly correlated. That is, occupational health corporate nurse managers seemed to allocate their time to job responsibilities they considered most important. Management activities related to policy, practice standards, quality assurance, staff development, and systems for client care delivery appear to represent the core responsibilities of occupational health nursing management. Curriculum recommendations for management positions in occupational health include: health policy, program planning, and evaluation; business strategy; applications of management information systems; quality assurance; and marketing.

Illinois Occupational Skill Standards: Automotive Technician Cluster.

ERIC Educational Resources Information Center

Illinois Occupational Skill Standards and Credentialing Council, Carbondale.

This document, which is intended as a guide for work force preparation program providers, details the Illinois occupational skill standards for programs preparing students for employment in occupations in the automotive technician cluster. The document begins with overviews of the Illinois perspective on occupational skill standards and…

Illinois Occupational Skill Standards. Meeting Professional Cluster.

ERIC Educational Resources Information Center

Illinois Occupational Skill Standards and Credentialing Council, Carbondale.

This document, which is intended as a guide for workforce preparation program providers, details the Illinois occupational skill standards for programs preparing students for employment in the meeting professional occupational cluster. It begins with a brief overview of the Illinois perspective on occupational skill standards and credentialing,…

Illinois Occupational Skill Standards. Beef Production Cluster.

ERIC Educational Resources Information Center

Illinois Occupational Skill Standards and Credentialing Council, Carbondale.

This document, which is intended as a guide for workforce preparation program providers, details the Illinois occupational skill standards for programs preparing students for employment in occupations in the beef production cluster. The document begins with a brief overview of the Illinois perspective on occupational skill standards and…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mendell, Mark J.; Apte, Mike G.

This report considers the question of whether the California Energy Commission should incorporate the ASHRAE 62.1 ventilation standard into the Title 24 ventilation rate (VR) standards, thus allowing buildings to follow the Indoor Air Quality Procedure. This, in contrast to the current prescriptive standard, allows the option of using ventilation rate as one of several strategies, which might include source reduction and air cleaning, to meet specified targets of indoor air concentrations and occupant acceptability. The research findings reviewed in this report suggest that a revised approach to a ventilation standard for commercial buildings is necessary, because the current prescriptivemore » ASHRAE 62.1 Ventilation Rate Procedure (VRP) apparently does not provide occupants with either sufficiently acceptable or sufficiently healthprotective air quality. One possible solution would be a dramatic increase in the minimum ventilation rates (VRs) prescribed by a VRP. This solution, however, is not feasible for at least three reasons: the current need to reduce energy use rather than increase it further, the problem of polluted outdoor air in many cities, and the apparent limited ability of increasing VRs to reduce all indoor airborne contaminants of concern (per Hodgson (2003)). Any feasible solution is thus likely to include methods of pollutant reduction other than increased outdoor air ventilation; e.g., source reduction or air cleaning. The alternative 62.1 Indoor Air Quality Procedure (IAQP) offers multiple possible benefits in this direction over the VRP, but seems too limited by insufficient specifications and inadequate available data to provide adequate protection for occupants. Ventilation system designers rarely choose to use it, finding it too arbitrary and requiring use of much non-engineering judgment and information that is not readily available. This report suggests strategies to revise the current ASHRAE IAQP to reduce its current limitations. These strategies, however, would make it more complex and more prescriptive, and would require substantial research. One practical intermediate strategy to save energy would be an alternate VRP, allowing VRs lower than currently prescribed, as long as indoor VOC concentrations were no higher than with VRs prescribed under the current VRP. This kind of hybrid, with source reduction and use of air cleaning optional but permitted, could eventually evolve, as data, materials, and air-cleaning technology allowed gradual lowering of allowable concentrations, into a fully developed IAQP. Ultimately, it seems that VR standards must evolve to resemble the IAQP, especially in California, where buildings must achieve zero net energy use within 20 years.« less

Occupational mental health promotion: a prevention agenda based on education and treatment. The American Psychological Association/National Institute for Occupational Safety and Health, Health Promotion Panel, 1990 Work and Well-Being Conference.

PubMed

1992-01-01

PURPOSE OF THE REVIEW. Psychological disorders are one of the 10 leading work-related diseases and injuries in the United States according to the National Institute for Occupational Safety and Health. This article addresses occupational metal health and preventive stress management in the workplace. The individual and organizational costs are briefly considered with concern for reducing the burden of suffering associated with these problems. SEARCH METHOD. As an American Psychological Association interdisciplinary panel, we searched the psychological, medical, public health, and organizational literature. We selected articles relevant to the problem of psychological disorders in the workplace and to enhancing occupational mental health and preventive stress management. IMPORTANT FINDINGS. The panel proposed a national agenda of education and treatment, combined with a program of evaluation research, for addressing these issues. Target populations are identified, and the need for collaboration among a variety of national constituencies is considered. Advancing occupational mental health and promoting skills in preventive stress management is considered in the context of comprehensive health promotion. MAJOR CONCLUSIONS. The panel concluded that there is a pressing need to: 1) set a 'gold' standard concerning the current state of knowledge in the domains of occupational mental health and stress management; 2) identify Diagnostically Related Groups (DRGs) which are stress-related; 3) establish assessment standards for stress and mental health; 4) set guidelines for reasonable interventions; and 5) establish acceptable post-outcome criteria.

Illinois Occupational Skill Standards: Clinical Laboratory Science/Biotechnology Cluster.

ERIC Educational Resources Information Center

Illinois Occupational Skill Standards and Credentialing Council, Carbondale.

This document, which is intended to serve as a guide for workforce preparation program providers, details the Illinois Occupational Skill Standards for clinical laboratory occupations programs. The document begins with a brief overview of the Illinois perspective on occupational skill standards and credentialing, the process used to develop the…

Illinois Occupational Skill Standards: Mechanical Drafting Cluster.

ERIC Educational Resources Information Center

Illinois Occupational Skill Standards and Credentialing Council, Carbondale.

This document, which is intended as a guide for work force preparation program providers, details the Illinois occupational skill standards for programs preparing students for employment in occupations in the mechanical drafting cluster. The document begins with a brief overview of the Illinois perspective on occupational skill standards and…

Illinois Occupational Skill Standards: Architectural Drafting Cluster.

ERIC Educational Resources Information Center

Illinois Occupational Skill Standards and Credentialing Council, Carbondale.

This document, which is intended as a guide for work force preparation program providers, details the Illinois occupational skill standards for programs preparing students for employment in occupations in the architectural drafting cluster. The document begins with a brief overview of the Illinois perspective on occupational skill standards and…

29 CFR 1960.19 - Other Federal agency standards affecting occupational safety and health.

Code of Federal Regulations, 2014 CFR

2014-07-01

... safety and health. 1960.19 Section 1960.19 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL... EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Standards § 1960.19 Other Federal agency standards affecting occupational safety and health. (a) Where employees of different agencies...

29 CFR 1960.19 - Other Federal agency standards affecting occupational safety and health.

Code of Federal Regulations, 2013 CFR

2013-07-01

... safety and health. 1960.19 Section 1960.19 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL... EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Standards § 1960.19 Other Federal agency standards affecting occupational safety and health. (a) Where employees of different agencies...

29 CFR 1960.19 - Other Federal agency standards affecting occupational safety and health.

Code of Federal Regulations, 2012 CFR

2012-07-01

... safety and health. 1960.19 Section 1960.19 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL... EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Standards § 1960.19 Other Federal agency standards affecting occupational safety and health. (a) Where employees of different agencies...

Illinois Occupational Skill Standards: Imaging/Pre-Press Cluster.

ERIC Educational Resources Information Center

Illinois Occupational Skill Standards and Credentialing Council, Carbondale.

This document, which is intended as a guide for work force preparation program providers, details the Illinois occupational skill standards for programs preparing students for employment in occupations in the imaging/pre-press cluster. The document begins with a brief overview of the Illinois perspective on occupational skill standards and…

78 FR 32365 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-30

...: National Institute of Standards and Technology (NIST). Title: Research on Evacuating Persons with Mobility... understanding of how building occupants with mobility impairments currently evacuate multi-story buildings in... in charge of developing emergency procedures for multi-story buildings in the United States...

Promoting and inhibiting factors for the use of validated dietary assessment questionnaires in health check-up counseling: from occupational health nurses and dietitians' perspective.

PubMed

Katagiri, Ryoko; Muto, Go; Sasaki, Satoshi

2018-06-01

A validated questionnaire is not typically used for dietary assessment in health check-up counseling provided by occupational health nurses in Japan. We conducted a qualitative study to investigate the barriers and promoting factors affecting the use of validated questionnaires. Ten occupational health nurses and three registered dietitians, working at a health insurance society, were recruited for this study using an open-ended, free description questionnaire. Inhibiting factors, such as "Feeling of satisfaction with the current method," "Recognition of importance," and "Sense of burden from the questionnaire", and as promoting factors, "Feeling the current method is insufficient", "Recognition of importance," "Reduction in the feeling of burden after the answer," "Expectation of and reaction to the result," and "Expectation for the effect of the counseling" were noted. Since a standardized dietary assessment method in health counseling might be desirable for the harmonization of work with diseases prevention in an occupational field, findings in this study could propose appropriate targets to reduce confusion in health professionals' concerning the use of validated questionnaires.

29 CFR 1910.18 - Changes in established Federal standards.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 1910.18 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS Adoption and Extension of Established Federal Standards § 1910.18 Changes in established Federal standards. Whenever an occupational safety and health...

29 CFR 1910.18 - Changes in established Federal standards.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 1910.18 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS Adoption and Extension of Established Federal Standards § 1910.18 Changes in established Federal standards. Whenever an occupational safety and health...

48 CFR 1371.113 - Department of Labor occupational safety and health standards for ship repair.

Code of Federal Regulations, 2013 CFR

2013-10-01

... occupational safety and health standards for ship repair. 1371.113 Section 1371.113 Federal Acquisition... CONSTRUCTION AND SHIP REPAIR Provisions and Clauses 1371.113 Department of Labor occupational safety and health standards for ship repair. Insert clause 1352.271-82, Department of Labor Occupational Safety and Health...

48 CFR 1371.113 - Department of Labor occupational safety and health standards for ship repair.

Code of Federal Regulations, 2012 CFR

2012-10-01

... occupational safety and health standards for ship repair. 1371.113 Section 1371.113 Federal Acquisition... CONSTRUCTION AND SHIP REPAIR Provisions and Clauses 1371.113 Department of Labor occupational safety and health standards for ship repair. Insert clause 1352.271-82, Department of Labor Occupational Safety and Health...

48 CFR 1371.113 - Department of Labor occupational safety and health standards for ship repair.

Code of Federal Regulations, 2014 CFR

2014-10-01

... occupational safety and health standards for ship repair. 1371.113 Section 1371.113 Federal Acquisition... CONSTRUCTION AND SHIP REPAIR Provisions and Clauses 1371.113 Department of Labor occupational safety and health standards for ship repair. Insert clause 1352.271-82, Department of Labor Occupational Safety and Health...

48 CFR 1371.113 - Department of Labor occupational safety and health standards for ship repair.

Code of Federal Regulations, 2011 CFR

2011-10-01

... occupational safety and health standards for ship repair. 1371.113 Section 1371.113 Federal Acquisition... CONSTRUCTION AND SHIP REPAIR Provisions and Clauses 1371.113 Department of Labor occupational safety and health standards for ship repair. Insert clause 1352.271-82, Department of Labor Occupational Safety and Health...

48 CFR 1371.113 - Department of Labor occupational safety and health standards for ship repair.

Code of Federal Regulations, 2010 CFR

2010-10-01

... occupational safety and health standards for ship repair. 1371.113 Section 1371.113 Federal Acquisition... CONSTRUCTION AND SHIP REPAIR Provisions and Clauses 1371.113 Department of Labor occupational safety and health standards for ship repair. Insert clause 1352.271-82, Department of Labor Occupational Safety and Health...

76 FR 25376 - Occupational Exposure to Hazardous Chemicals in Laboratories Standard; Extension of the Office of...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-04

... describes: Standard operating procedures for using hazardous chemicals; hazard-control techniques; equipment...] Occupational Exposure to Hazardous Chemicals in Laboratories Standard; Extension of the Office of Management... collection requirements specified in the Standard on Occupational Exposure to Hazardous Chemicals in...

Patient-days: a better measure of incidence of occupational bloodborne exposures.

PubMed

Chen, Luke F; Sexton, Daniel J; Kaye, Keith S; Anderson, Deverick J

2009-09-01

There is currently no accepted standard denominator to calculate and to report the incidence of occupational exposures to bloodborne pathogens (OEBBPs) in health care. We performed a multicenter study of OEBBP injuries reported from 31 community hospitals in the southeastern United States from January 2003 to December 2006. A qualitative design was used to assess 4 commonly used denominators to calculate the incidence of OEBBP: patient-days; staffed beds; occupied beds and full-time employee equivalents (FTEs). Six criteria were used to assess the quality and suitability of each denominator as a standard method to calculate incidence of OEBBP. We also analyzed the correlation of hospital rankings produced by these 4 denominators. During 4 years of study, a total of 3375 occupational exposures were reported. Patient-days outperformed others as a denominator to calculate rates of OEBBP when judged by 6 predefined criteria. Data for staffed beds, occupied beds, and FTE were manually collected, infrequently reported, and often subject to missing data. Furthermore, FTE and staffed beds data also captured unoccupied beds and non-clinical employee data that were not associated with risk of OEBBP. Patient-days may be the most suitable and readily available denominator for standard reporting and benchmarking of incidence of OEBBP. Patient-days may be used as a standard method for comparing rates of OEBBP.

Critical features of an auditable management system for an ISO 9000-compatible occupational health and safety standard.

PubMed

Levine, S; Dyjack, D T

1997-04-01

An International Organization for Standardization (ISO) 9001: 1994-harmonized occupational health and safety (OHS) management system has been written at the University of Michigan, and reviewed, revised, and accepted under the direction of the American Industrial Hygiene Association (AIHA) Occupational Health and Safety Management Systems (OHSMS) Task Force and the Board of Directors. This system is easily adaptable to the ISO 14001 format and to both OHS and environmental management system applications. As was the case with ISO 9001: 1994, this system is expected to be compatible with current production quality and OHS quality systems and standards, have forward compatibility for new applications, and forward flexibility, with new features added as needed. Since ISO 9001: 1987 and 9001: 1994 have been applied worldwide, the incorporation of harmonized OHS and environmental management system components should be acceptable to business units already performing first-party (self-) auditing, and second-party (contract qualification) auditing. This article explains the basis of this OHS management system, its relationship to ISO 9001 and 14001 standards, the philosophy and methodology of an ISO-harmonized system audit, the relationship of these systems to traditional OHS audit systems, and the authors' vision of the future for application of such systems.

78 FR 52848 - Occupational Safety and Health Standards for Aircraft Cabin Crewmembers

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-27

... [Docket No.: FAA-2012-0953] Occupational Safety and Health Standards for Aircraft Cabin Crewmembers AGENCY... regulation of some occupational safety and health conditions affecting cabin crewmembers on aircraft by the Occupational Safety and Health Administration. This policy statement will enhance occupational safety and...

76 FR 72216 - Occupational Exposure to Hazardous Chemicals in Laboratories Standard; Extension of the Office of...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-22

... by developing a written Chemical Hygiene Plan (CHP) that describes standard operating procedures for...] Occupational Exposure to Hazardous Chemicals in Laboratories Standard; Extension of the Office of Management... requirements specified in the Standard on Occupational Exposure to Hazardous Chemicals in Laboratories (29 CFR...

Current and new challenges in occupational lung diseases.

PubMed

De Matteis, Sara; Heederik, Dick; Burdorf, Alex; Colosio, Claudio; Cullinan, Paul; Henneberger, Paul K; Olsson, Ann; Raynal, Anne; Rooijackers, Jos; Santonen, Tiina; Sastre, Joaquin; Schlünssen, Vivi; van Tongeren, Martie; Sigsgaard, Torben

2017-12-31

Occupational lung diseases are an important public health issue and are avoidable through preventive interventions in the workplace. Up-to-date knowledge about changes in exposure to occupational hazards as a result of technological and industrial developments is essential to the design and implementation of efficient and effective workplace preventive measures. New occupational agents with unknown respiratory health effects are constantly introduced to the market and require periodic health surveillance among exposed workers to detect early signs of adverse respiratory effects. In addition, the ageing workforce, many of whom have pre-existing respiratory conditions, poses new challenges in terms of the diagnosis and management of occupational lung diseases. Primary preventive interventions aimed to reduce exposure levels in the workplace remain pivotal for elimination of the occupational lung disease burden. To achieve this goal there is still a clear need for setting standard occupational exposure limits based on transparent evidence-based methodology, in particular for carcinogens and sensitising agents that expose large working populations to risk. The present overview, focused on the occupational lung disease burden in Europe, proposes directions for all parties involved in the prevention of occupational lung disease, from researchers and occupational and respiratory health professionals to workers and employers. The content of this work is not subject to copyright. Design and branding are copyright ©ERS 2017.

Commercial Motor Vehicle Driver Obstructive Sleep Apnea Screening and Treatment in the United States: An Update and Recommendation Overview.

PubMed

Colvin, Loretta J; Collop, Nancy A

2016-01-01

No regulatory mandate exists in the United States (U.S.) for comprehensive obstructive sleep apnea (OSA) risk assessment and stratification for commercial motor vehicle (CMV) drivers. Current Federal Motor Carrier Safety Administration (FMCSA) requirements are outdated and depend largely on subjective report, a less reliable strategy in an occupational setting. Without FMCSA standards, sleep specialists, occupational medical examiners and employers rely on a collection of medical consensus recommendations to establish standards of care. These recommendations advise OSA risk assessment through a combination of focused medical history, physical examination, questionnaires, and accident history, which increase OSA detection compared to current FMCSA standards. For those diagnosed with OSA, consensus-based risk stratification helps identify CMV drivers who may benefit from OSA treatment and establish minimum standards for assessing treatment efficacy and adherence. Unfortunately no consolidated recommendation exists; rather, publications span medical and governmental literature in a patchwork fashion that no longer fully reflect current practice due to subsequent advances in OSA diagnosis, treatment, and technology. Based on searches of medical literature, internet materials, and reference lists from existing publications, an overview and discussion of key published recommendations regarding OSA assessment and treatment in CMV operators is provided. Suggestions for incorporating these recommendations into clinical sleep medicine practice in the U.S. are presented. The challenge for sleep specialists is maintaining the delicate balance between recommendations impacting standard of care and associated medico-legal impact with stakeholder interests from medical, regulatory, industry and public perspectives while providing high quality and efficient care. © 2016 American Academy of Sleep Medicine.

An analysis of violations of Osha's (1987) occupational exposure to benzene standard.

PubMed

Williams, Pamela R D

2014-01-01

The Occupational Safety and Health Administration (OSHA), which was formed by the Occupational Safety and Health Act of 1970 (OSH Act), establishes enforceable health and safety standards in the workplace and issues violations and penalties for non-compliance with these standards. The purpose of the current study was to evaluate the number and type of violations of the OSHA (1987) Occupational Exposure to Benzene Standard. Violations of the OSHA Hazard Communication Standard (HCS), particularly those that may pertain to specific provisions of the benzene standard, were also assessed. All analyses were based on OSHA inspection data that have been collected since the early 1970s and that are publicly available from the U.S. Department of Labor enforcement website. Analysis of these data shows that fewer than a thousand OSHA violations of the benzene standard have been issued over the last 25+ years. The results for benzene are in contrast to those for some other toxic and hazardous substances that are regulated by OSHA, such as blood-borne pathogens, lead, and asbestos, for which there have been issued tens of thousands of OSHA violations. The number of benzene standard violations also varies by time period, standard provision, industry sector, and other factors. In particular, the greatest number of benzene standard violations occurred during the late 1980s to early/mid 1990s, soon after the 1987 final benzene rule was promulgated. The majority of benzene standard violations also pertain to noncompliance with specific provisions and subprovisions of the standard dealing with initial exposure monitoring requirements, the communication of hazards to employees, and medical surveillance programs. Only a small fraction of HCS violations are attributed, at least in part, to potential benzene hazards in the workplace. In addition, most benzene standard violations are associated with specific industries within the manufacturing sector where benzene or benzene-containing products may be used or produced during production processes, such as petroleum refineries, metal industries, and chemical companies. Not surprisingly, the greatest number of benzene standard violations have been issued to private facility owners (rather than government entities), given that the OSH Act primarily covers private sector employers. More violations have also been issued during inspections where union representation was present and from complaint-driven (vs. planned or other) inspections, which is consistent with OSHA inspection priorities. Violations of the benzene standard have typically involved a single instance per facility and 10 or fewer exposed employees. Because the OSH Act prescribes penalty caps for citations, initial penalties issued for noncompliance with the benzene standard have generally been less than $5,000 per violation. Despite some potential limitations, the OSHA inspection database contains the best available data for assessing historical and current violations of the benzene standard. These data, which have not been previously analyzed or published for benzene, may be of interest to professionals and practitioners involved in benzene risk assessment, risk management, and/or public policy issues.

No effects of power line frequency extremely low frequency electromagnetic field exposure on selected neurobehavior tests of workers inspecting transformers and distribution line stations versus controls.

PubMed

Li, Li; Xiong, De-fu; Liu, Jia-wen; Li, Zi-xin; Zeng, Guang-cheng; Li, Hua-liang

2014-03-01

We aimed to evaluate the interference of 50 Hz extremely low frequency electromagnetic field (ELF-EMF) occupational exposure on the neurobehavior tests of workers performing tour-inspection close to transformers and distribution power lines. Occupational short-term "spot" measurements were carried out. 310 inspection workers and 300 logistics staff were selected as exposure and control. The neurobehavior tests were performed through computer-based neurobehavior evaluation system, including mental arithmetic, curve coincide, simple visual reaction time, visual retention, auditory digit span and pursuit aiming. In 500 kV areas electric field intensity at 71.98% of total measured 590 spots were above 5 kV/m (national occupational standard), while in 220 kV areas electric field intensity at 15.69% of total 701 spots were above 5 kV/m. Magnetic field flux density at all the spots was below 1,000 μT (ICNIRP occupational standard). The neurobehavior score changes showed no statistical significance. Results of neurobehavior tests among different age, seniority groups showed no significant changes. Neurobehavior changes caused by daily repeated ELF-EMF exposure were not observed in the current study.

29 CFR 1910.17 - Effective dates.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS Adoption and Extension of Established Federal Standards § 1910.17... Harbor Workers' Compensation Act, that occupational safety and health standard as incorporated by...

29 CFR 1910.17 - Effective dates.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS Adoption and Extension of Established Federal Standards § 1910.17... Harbor Workers' Compensation Act, that occupational safety and health standard as incorporated by...

Occupational lung diseases in Australia.

PubMed

Hoy, Ryan F; Brims, Fraser

2017-11-20

Occupational exposures are an important determinant of respiratory health. International estimates note that about 15% of adult-onset asthma, 15% of chronic obstructive pulmonary disease and 10-30% of lung cancer may be attributable to hazardous occupational exposures. One-quarter of working asthmatics either have had their asthma caused by work or adversely affected by workplace conditions. Recently, cases of historical occupational lung diseases have been noted to occur with new exposures, such as cases of silicosis in workers fabricating kitchen benchtops from artificial stone products. Identification of an occupational cause of a lung disease can be difficult and requires maintaining a high index of suspicion. When an occupational lung disease is identified, this may facilitate a cure and help to protect coworkers. Currently, very little information is collected regarding actual cases of occupational lung diseases in Australia. Most assumptions about many occupational lung diseases are based on extrapolation from overseas data. This lack of information is a major impediment to development of targeted interventions and timely identification of new hazardous exposures. All employers, governments and health care providers in Australia have a responsibility to ensure that the highest possible standards are in place to protect workers' respiratory health.

29 CFR 1910.34 - Coverage and definitions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 5 2014-07-01 2014-07-01 false Coverage and definitions. 1910.34 Section 1910.34 Labor... OCCUPATIONAL SAFETY AND HEALTH STANDARDS Exit Routes and Emergency Planning § 1910.34 Coverage and definitions... plans. (c) Definitions. Electroluminescent means a light-emitting capacitor. Alternating current excites...

29 CFR 1910.34 - Coverage and definitions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 29 Labor 5 2013-07-01 2013-07-01 false Coverage and definitions. 1910.34 Section 1910.34 Labor... OCCUPATIONAL SAFETY AND HEALTH STANDARDS Exit Routes and Emergency Planning § 1910.34 Coverage and definitions... plans. (c) Definitions. Electroluminescent means a light-emitting capacitor. Alternating current excites...

29 CFR 1910.34 - Coverage and definitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 29 Labor 5 2012-07-01 2012-07-01 false Coverage and definitions. 1910.34 Section 1910.34 Labor... OCCUPATIONAL SAFETY AND HEALTH STANDARDS Exit Routes and Emergency Planning § 1910.34 Coverage and definitions... plans. (c) Definitions. Electroluminescent means a light-emitting capacitor. Alternating current excites...

OCCUPATIONS IN COLORADO. PART I, OUTLOOK BY INDUSTRIES.

ERIC Educational Resources Information Center

1966

CURRENT AND PROJECTED EMPLOYMENT STATISTICS ARE GIVEN FOR THE STATE AND FOR THE DENVER STANDARD METROPOLITAN STATISTICAL AREA WHICH INCLUDES ADAMS, ARAPAHOE, BOULDER, DENVER, AND JEFFERSON COUNTIES. DATA WERE OBTAINED FROM THE COLORADO DEPARTMENT OF EMPLOYMENT, DENVER RESEARCH INSTITUTE, U.S. CENSUS, UNIVERSITY OF COLORADO, MOUNTAIN STATES…

[Amendments of occupational laws in Germany and consequences for occupational health].

PubMed

Bolm-Audorff, U

2008-03-01

German legislation with respect to occupational health during recent years is reviewed. Discussed is the occupational safety law and related legislation as the hazardous substances act and the biological hazard act, the occupational health and safety act and the social act VII. Most improvements of occupational standards in Germany are induced by regulations of the European Union. Furthermore initiatives of the federal government and the federal states according to an amendment of the social act VII and the occupational health and safety act, which would induce a reduction of social standards, are discussed. The role of occupational medicine in companies by some of the above mentioned laws is improved. On the other hand the situation of occupational physicians in companies, universities and other agencies is characterized by budget cuts, reduction of occupational standards and loss of importance.

Civilian law: from occupational medicine to occupational event.

PubMed

Mpotos, N; Watelet, J B

Civilian law:from occupational medicine to occupational event. Despite the growing importance of objective measurements, the health effects of many occupational risk factors are currently not fully quantified. Occupational noise, as a widespread risk factor, is illustrative in this regard; there is a strong body of evidence linking it to an important health outcome (hearing loss), but it is less decisively associated with others (such as psychological disorders). It is also distinct from environmental noise, and therefore falls under the responsibility of employers as well as individuals. Noise-induced hearing loss (NIHL) is, at present, incurable and irreversible. However, it is preventable, if effective and global hearing conservation programmes can be implemented. These programmes should not be isolated efforts, but should be integrated into the overall hazard prevention and control programme of the workplace. Belgian law encompasses a set of provisions for prevention and the protection of the health and safety of workers within the workplace, including aspects pertaining to the hygiene of the workplace and psychosocial aspects at work (stress, violence, bullying and sexual harassment, among others). In principle, combating environmental noise is fully addressed in this country. However, other levels of policy-making also play an important role in this regard. For example, the federal government is in charge of product standards, and therefore also of noise emission standards for products. The interpretation and enforcement of Belgian legislation on well-being at work converts European directives and international agreements on well-being at work into Belgian law.

29 CFR 1910.12 - Construction work.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS Adoption and Extension of Established Federal Standards § 1910.12... occupational safety and health standards under section 6 of the Act and shall apply, according to the...

[Promotion of Occupational Mental Health with Psychiatrists].

PubMed

Tanaka, Katsutoshi

2015-01-01

The promotion of occupational mental health is stipulated by laws and precedents, including the Labor Standards Act, Industrial Safety and Health Act, and Labor Contract Act. These laws and precedents are used to formulate actual mental health activities and responses to individuals with mental health disorders to some extent. Among mental health-related undertakings, the most important role that occupational health staff should play as healthcare professionals is to support business operators' obligations regarding safety. This role is to prevent health problems in the workplace, not to manage corporate risk. However, the health and safety obligations imposed on business operators under the current precedents are far beyond the levels that non-specialists can handle. The active participation of psychiatrists is needed to promote workplace mental health today.

A comparison of international occupational therapy competencies: implications for Australian standards in the new millennium.

PubMed

Rodger, Sylvia; Clark, Michele; Banks, Rebecca; O'Brien, Mia; Martinez, Kay

2009-12-01

A timely evaluation of the Australian Competency Standards for Entry-Level Occupational Therapists (1994) was conducted. This thorough investigation comprised a literature review exploring the concept of competence and the applications of competency standards; systematic benchmarking of the Australian Occupational Therapy Competency Standards (OT AUSTRALIA, 1994) against other national and international competency standards and other affiliated documents, from occupational therapy and other cognate disciplines; and extensive nationwide consultation with the professional community. This paper explores and examines the similarities and disparities between occupational therapy competency standards documents available in English from Australia and other countries. An online search for national occupational therapy competency standards located 10 documents, including the Australian competencies. Four 'frameworks' were created to categorise the documents according to their conceptual underpinnings: Technical-Prescriptive, Enabling, Educational and Meta-Cognitive. Other characteristics that appeared to impact the design, content and implementation of competency standards, including definitions of key concepts, authorship, national and cultural priorities, scope of services, intended use and review mechanisms, were revealed. The proposed 'frameworks' and identification of influential characteristics provided a 'lens' through which to understand and evaluate competency standards. While consistent application of and attention to some of these characteristics appear to consolidate and affirm the authority of competency standards, it is suggested that the national context should be a critical determinant of the design and content of the final document. The Australian Occupational Therapy Competency Standards (OT AUSTRALIA, 1994) are critiqued accordingly, and preliminary recommendations for revision are proposed.

Occupational asthma due to chrome and nickel electroplating

PubMed Central

Bright, P.; Burge, P. S.; O'Hickey, S. P.; Gannon, P. F.; Robertson, A. S.; Boran, A.

1997-01-01

BACKGROUND: Exposure to chromium during electroplating is a recognised though poorly characterised cause of occupational asthma. The first series of such patients referred to a specialist occupational lung disease clinic is reported. METHODS: The diagnosis of occupational asthma was made from a history of asthma with rest day improvement and confirmed by specific bronchial provocation testing with potassium dichromate and nickel chloride. RESULTS: Seven workers had been exposed to chrome and nickel fumes from electroplating for eight months to six years before asthma developed. One subject, although exposed for 11 years without symptoms, developed asthma after a single severe exposure during a ventilation failure. This was the only subject who had never smoked. The diagnosis was confirmed by specific bronchial challenges. Two workers had isolated immediate reactions, one a late asthmatic reaction, and four a dual response following exposure to nebulised potassium dichromate at 1-10 mg/ml. Two of the four subjects were also challenged with nebulised nickel chloride at 0.1-10 mg/ml. Two showed isolated late asthmatic reactions, in one at 0.1 mg/ml, where nickel was probably the primary sensitising agent. Four workers carried out two hourly measurements of peak expiratory flow over days at and away from work. All were scored as having occupational asthma using OASYS-2. Breathing zone air monitoring was carried out in 60 workers from four decorative and two hard chrome plating shops from workers with similar jobs to those sensitised. No measurement exceeded the current occupational exposure standard for chromate or nickel, the mean levels of chromate exposure for jobs similar to those of the affected workers were 9-15 micrograms/m3. CONCLUSION: Chrome used in electroplating is a potential cause of occupational asthma. Sensitivity to chrome in electroplaters may occur in situations where exposure levels are likely to be within the current exposure standards. There may be cross reactivity with nickel. Inhalation challenge with nebulised potassium dichromate solution is helpful in making the specific diagnosis where doubt exists. 


 PMID:9039236

Parallels in Arts Education and CTE: Some Guiding Reflections

ERIC Educational Resources Information Center

Hull, Bradley J.

2010-01-01

Many forces shape the current national conversation regarding career and technical education (CTE). Perkins IV guides the discussion through concepts such as challenging academic and technical standards; high skill, high wage, or high demand occupations; and programs of study. Workforce development and training, the economic recession,…

National and Scottish Vocational Qualifications: Early Indications of Employers' Take-up and Use.

ERIC Educational Resources Information Center

Callender, C.; And Others

A study examined British employers' adoption of National Vocational Qualifications and Scottish Vocational Qualifications (NVQ/SVQs) and the occupational standards underpinning them. Data regarding current/projected use of the NVQ/SVQs and their perceived costs, benefits, and difficulties of implementation were collected from the following:…

A Catalog of Performance Objectives, Performance Conditions, and Performance Guides for Machine Tool Operations.

ERIC Educational Resources Information Center

Stadt, Ronald; And Others

This catalog provides performance objectives, tasks, standards, and performance guides associated with current occupational information relating to the job content of machinists, specifically tool grinder operators, production lathe operators, and production screw machine operators. The catalog is comprised of 262 performance objectives, tool and…

Collaboration of occupational physicians with national health system and general practitioners in Italy

PubMed Central

PERSECHINO, Benedetta; FONTANA, Luca; BURESTI, Giuliana; RONDINONE, Bruna Maria; LAURANO, Patrizia; FORTUNA, Grazia; VALENTI, Antonio; IAVICOLI, Sergio

2016-01-01

A good cooperation between occupational physicians and other healthcare professionals is essential in order to achieve an overall improvement of workers/patients’ well-being. Unfortunately, collaboration between occupational physicians and other physicians is often lacking or very poor. In this context, using a self-administered questionnaire, we investigated the cooperation of Italian occupational physicians with the National Health System (NHS) facilities and with the general practitioners in order to identify any potential critical issues that may hinder an effective and collaborative relationships between these professionals. The survey was conducted from October 2013 to January 2014. Nearly all of the interviewed occupational physicians have had contacts with colleagues of the Departments for Prevention and Occupational Health and Safety of the NHS. Regarding the relationship between occupational physicians and general practitioners findings showed that their cooperation is quite difficult and it would not seem a two-way collaboration. Cooperation between occupational physicians and NHS would benefit from the development of communication strategies and tools enhancing the support and assistance functions of the NHS facilities. The elaboration and subsequent application of operational guidelines and standardized procedures of communication would also improve collaboration between occupational physicians and general practitioners that is currently considered rather insufficient and incomplete. PMID:27733729

Environmental Assessment: Construction and Operation of New Security Forces Facility at Hill Air Force Base, Utah

DTIC Science & Technology

2008-10-01

Quality Standards NEPA National Environmental Policy Act of 1969 NOx Nitrogen Oxides OO-ALC Ogden Air Logistics Center OSHA Occupational Safety...current NAAQS. These standards regulate six common pollutants: carbon monoxide, lead, nitrogen oxides, sulfur oxides, ozone, and particulate matter...with the state plan. The conformity threshold emission level for ozone in maintenance areas is 100 tons per year for nitrogen oxide (NOx) and volatile

Illinois Occupational Skill Standards: Information Technology Design/Build Cluster.

ERIC Educational Resources Information Center

Illinois Occupational Skill Standards and Credentialing Council, Carbondale.

This document contains Illinois Occupational Skill Standards for occupations in the Information Technology Design and Build Cluster (technical writer, programmer, system analyst, network architect, application product architect, network engineer, and database administrator). The skill standards define what an individual should know and the…

Tracking occupational hearing loss across global industries: A comparative analysis of metrics

PubMed Central

Rabinowitz, Peter M.; Galusha, Deron; McTague, Michael F.; Slade, Martin D.; Wesdock, James C.; Dixon-Ernst, Christine

2013-01-01

Occupational hearing loss is one of the most prevalent occupational conditions; yet, there is no acknowledged international metric to allow comparisons of risk between different industries and regions. In order to make recommendations for an international standard of occupational hearing loss, members of an international industry group (the International Aluminium Association) submitted details of different hearing loss metrics currently in use by members. We compared the performance of these metrics using an audiometric data set for over 6000 individuals working in 10 locations of one member company. We calculated rates for each metric at each location from 2002 to 2006. For comparison, we calculated the difference of observed–expected (for age) binaural high frequency hearing loss (in dB/year) for each location over the same time period. We performed linear regression to determine the correlation between each metric and the observed–expected rate of hearing loss. The different metrics produced discrepant results, with annual rates ranging from 0.0% for a less-sensitive metric to more than 10% for a highly sensitive metric. At least two metrics, a 10 dB age-corrected threshold shift from baseline and a 15 dB nonage-corrected shift metric, correlated well with the difference of observed–expected high-frequency hearing loss. This study suggests that it is feasible to develop an international standard for tracking occupational hearing loss in industrial working populations. PMID:22387709

Deconstructing hierarchies: Service users as co-teachers in occupational therapy education.

PubMed

Yalon-Chamovitz, Shira; Kraiem, Yoav; Gutman, Carolyn

2017-01-01

While occupational therapy currently tends to view itself as operating based on a client-centered, collaborative approach, studies often reflect a gap between rhetoric and practice. This work presents a new pedagogic standard which moves away from the medical model and toward a collaborative, client-centred approach. It functions to support a practice which embraces the respect for, and partnership with, people receiving services and replaces historic patterns which may strengthen the legitimacy of the professional and sustain clients' dependence. This pedagogy develops a therapeutic dialogue which draws from partnerships created in the classroom, where occupational therapy students engage in courses with a co-teacher service user, and examines how the collaboration with service users contributes to the training of occupational therapy students. Students and co-teachers can participate in the challenging experience of integrating theoretical knowledge with lived experience, thereby augmenting the development of a new and inclusive knowledge base.

Illinois Occupational Skill Standards: Telecommunications Technician Cluster.

ERIC Educational Resources Information Center

Illinois Occupational Skill Standards and Credentialing Council, Carbondale.

This document, which is intended as a guide for workforce preparation program providers, details the Illinois Occupational Skill Standards for programs preparing students for employment in the telecommunications technician occupational cluster. The document begins with a brief overview of the Illinois perspective on occupational skills standards…

Illinois Occupational Skill Standards: Housekeeping Management Cluster.

ERIC Educational Resources Information Center

Illinois Occupational Skill Standards and Credentialing Council, Carbondale.

This document contains 44 occupational skill standards for the housekeeping management occupational cluster, as required for the state of Illinois. Skill standards, which were developed by committees that included educators and representatives from business, industry, and labor, are intended to promote education and training investment and ensure…

Illinois Occupational Skill Standards: Chemical Process Technical Operators.

ERIC Educational Resources Information Center

Illinois Occupational Skill Standards and Credentialing Council, Carbondale.

This document, which is intended for workforce preparation program providers, details the Illinois Occupational Skill Standards for programs preparing students for employment as chemical process technical operators. The document begins with a brief overview of the Illinois perspective on occupational skill standards and credentialing, the process…

Review of carcinogenicity of hexavalent chrome and proposal of revising approval standards for an occupational cancers in Korea.

PubMed

Kim, Jungwon; Seo, Sangyun; Kim, Yangho; Kim, Dae Hwan

2018-01-01

The objective of this study is to suggest revised recognition standards for occupational disease due to chromium (VI) by reflecting recent domestic and international research works and considering domestic exposure status with respect to target organs, exposure period, and cumulative exposure dose in relation to the chromium (VI)-induced occupational disease compensation. In this study, the reports published by major international institutions such as World Health Organization (WHO) International Agency for Research on Cancer (IARC) (2012), Occupational Safety and Health Administration (OSHA) (2006), National Institute for Occupational Safety and Health (NIOSH) (2013), American Conference of Governmental Industrial Hygienists (ACGIH) (2004), National Toxicology Program (NTP) (2014), and Agency for Toxic Substances and Disease Registry (ASTDR) (2012) were reviewed and the recent research works searched by PubMed were summarized. Considering the recent research works and the domestic situation, only lung cancer is conserved in the legislative bill in relation to chromium (VI), and the exposure period is not included in the bill. Nasal and paranasal sinus cancer was excluded from the list of cancers that are compensated as the chromium (VI)- induced occupational disease, while lung cancer remains in the list. In the view of legislative unity, considering the fact that only the cancers having sufficient evidence are included in the conventional list of cancers compensated as occupational disease, nasal and paranasal sinus cancer having limited evidence were excluded from the list.The exposure period was also removed from the legislative bill due to the insufficient evidence. Recent advices in connection with cumulative exposure dose were proposed, and other considerable points were provided with respect to individual occupational relevance. It is suggested that the current recognition standard which is "Lung cancer or nasal and paranasal sinus cancer caused by exposure to chromium (VI) or compounds thereof (exposure for two years or longer), or nickel compounds" should be changed to "Lung cancer caused by exposure to chromium (VI) or compounds thereof, and lung cancer or nasal and paranasal sinus cancer caused by exposure to nickel compounds".

The status of occupational blood and infectious body fluids exposures in five blood centres in China: a 5-year review.

PubMed

Wang, Y J; Meng, Z H; Zheng, X F; Tang, X X; Sang, L Y; Du, X-M; Cheng, Y-Z

2015-12-01

Little information about the occupational exposures to blood and body fluid (BBF) among blood service workers (BSWs) in blood stations in China is available currently. To assess current status of occupational exposure to BBF and assess the knowledge about occupational blood-borne pathogen exposures and universal precaution among BSWs in blood donations in China. To understand the incidence of occupational exposure in five blood centres in China. A cross-sectional study was conducted from January 2008 to December 2013. There were a total of 99 BBF exposures reported during the study period. The total incidence of BBF exposures was 4.4 per 100 person-years. Higher rates were observed for persons employed less than five years and persons less than 45 years old. Nurses have the highest percentage (49.5%) of BBF exposures. BBF exposures occurred most commonly during the afternoon (62.7%). Percutaneous injuries were the most common BBF exposures. Most incidents occurred during sharps use (73.4%). The major cause of occupational exposure was that there was no continuous training (48.4%) and improper use of equipment (23.2%). Only 56.6% of BBF exposures had appropriate first aid measures. During this research work, one staff member was reported to have seroconverted to syphilis after BBF exposure. To reduce BBF exposures, it is urgent to take several effective actions in China, including improved occupational health systems, adequate education, administrative support, increased use of standard precautions, better safety devices/products and work practices. © 2015 British Blood Transfusion Society.

Standards for Quality Programs in Agricultural Occupations in the Secondary Schools and Area Vocational Centers of Illinois. Phase II. A Progress Report.

ERIC Educational Resources Information Center

Stitt, Thomas R.; And Others

The purpose of this project was to prepare materials to be used in the review and evaluation of an agricultural occupations program. Based on standards validated by Illinois agricultural occupations teachers, a standards workbook was developed that included standards specific to agricultural production, agricultural sales and service, agricultural…

Illinois Occupational Skill Standards: Swine Production Cluster.

ERIC Educational Resources Information Center

Illinois Occupational Skill Standards and Credentialing Council, Carbondale.

This document contains 52 Occupational Skill Standards for the swine production occupational cluster, as required for the state of Illinois. Skill Standards, which were developed by committees that included educators, business, industry, and labor, are intended to promote education and training investment and ensure that students and workers are…

Illinois Occupational Skill Standards: Entry-Level Truck Driver.

ERIC Educational Resources Information Center

Illinois Occupational Skill Standards and Credentialing Council, Carbondale.

This document, which is intended to serve as a guide for workforce preparation program providers, details the Illinois Occupational Skill Standards for programs preparing students for employment as entry-level truck drivers. The document begins with a brief overview of the Illinois perspective on occupational skill standards and credentialing, the…

[Evaluation of the standard application of Delphi in the diagnosis of chronic obstructive pulmonary disease caused by occupational irritant chemicals].

PubMed

Zhao, L; Yan, Y J

2017-11-20

Objective: To investigate the problems encountered in the application of the standard (hereinafter referred to as standard) for the diagnosis of chronic obstructive pulmonary disease caused by occu-pational irritant chemicals, to provide reference for the revision of the new standard, to reduce the number of missed patients in occupational COPD, and to get rid of the working environment of those who suffer from chronic respiratory diseases due to long-term exposure to poisons., slowing the progression of the disease. Methods: Using Delphi (Delphi) Expert research method, after the senior experts to demonstrate, to under-stand the GBZ 237-2011 "occupational irritant chemicals to the diagnosis of chronic obstructive pulmonary dis-ease" standard evaluation of the system encountered problems, to seek expert advice, The problems encoun-tered during the clinical implementation of the standards promulgated in 2011 are presented. Results: Through the Delphi Expert investigation method, it is found that experts agree on the content evaluation and implemen-tation evaluation in the standard, but the operational evaluation of the standard is disputed. According to the clinical experience, the experts believe that the range of occupational irritant gases should be expanded, and the operation of the problem of smoking, seniority determination and occupational contact history should be challenged during the diagnosis. Conclusions: Since the promulgation in 2011 of the criteria for the diagnosis of chronic obstructive pulmonary disease caused by occupational stimulant chemicals, there have been some problems in the implementation process, which have caused many occupationally exposed to irritating gases to suffer from "occupational chronic respiratory Diseases" without a definitive diagnosis.

Illinois Occupational Skill Standards: Occupational Therapy Cluster.

ERIC Educational Resources Information Center

Illinois Occupational Skill Standards and Credentialing Council, Carbondale.

This document, which is intended to serve as a guide for work force preparation program providers, details the Illinois occupational skill standards for programs preparing students for employment in jobs in occupational therapy. Agency partners involved in this project include: the Illinois State board of Education, Illinois Community College…

Illinois Occupational Skill Standards: In-Store Retailing Cluster.

ERIC Educational Resources Information Center

Illinois Occupational Skill Standards and Credentialing Council, Carbondale.

This document, which is intended to serve as a guide for work force preparation program providers, details the Illinois occupational skill standards for programs preparing students for employment in occupations in the in-store retailing cluster. The document begins with a brief overview of the Illinois perspective on occupational skill standards…

Illinois Occupational Skill Standards. Collision Repair Technician Cluster.

ERIC Educational Resources Information Center

Illinois Occupational Skill Standards and Credentialing Council, Carbondale.

This document, which is intended as a guide for workforce preparation program providers, details the Illinois occupational skill standards for programs preparing students for employment in occupations in the (vehicle) collision repair technician cluster. It begins with a brief overview of the Illinois perspective on occupational skill standards…

Illinois Occupational Skill Standards: Finishing and Distribution Cluster.

ERIC Educational Resources Information Center

Illinois Occupational Skill Standards and Credentialing Council, Carbondale.

This document, which is intended as a guide for work force preparation program providers, details the Illinois occupational skill standards for programs preparing students for employment in occupations in the finishing and distribution cluster. The document begins with a brief overview of the Illinois perspective on occupational skill standards…

77 FR 75600 - Policy Statement on Occupational Safety and Health Standards for Aircraft Cabin Crewmembers...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-21

... [Docket No. FAA-2012-0953] Policy Statement on Occupational Safety and Health Standards for Aircraft Cabin... announced a proposed policy statement regarding the regulation of some occupational safety and health conditions affecting cabin crewmembers on aircraft by the Occupational Safety and Health Administration. The...

Commercial Motor Vehicle Driver Obstructive Sleep Apnea Screening and Treatment in the United States: An Update and Recommendation Overview

PubMed Central

Colvin, Loretta J.; Collop, Nancy A.

2016-01-01

No regulatory mandate exists in the United States (U.S.) for comprehensive obstructive sleep apnea (OSA) risk assessment and stratification for commercial motor vehicle (CMV) drivers. Current Federal Motor Carrier Safety Administration (FMCSA) requirements are outdated and depend largely on subjective report, a less reliable strategy in an occupational setting. Without FMCSA standards, sleep specialists, occupational medical examiners and employers rely on a collection of medical consensus recommendations to establish standards of care. These recommendations advise OSA risk assessment through a combination of focused medical history, physical examination, questionnaires, and accident history, which increase OSA detection compared to current FMCSA standards. For those diagnosed with OSA, consensus-based risk stratification helps identify CMV drivers who may benefit from OSA treatment and establish minimum standards for assessing treatment efficacy and adherence. Unfortunately no consolidated recommendation exists; rather, publications span medical and governmental literature in a patchwork fashion that no longer fully reflect current practice due to subsequent advances in OSA diagnosis, treatment, and technology. Based on searches of medical literature, internet materials, and reference lists from existing publications, an overview and discussion of key published recommendations regarding OSA assessment and treatment in CMV operators is provided. Suggestions for incorporating these recommendations into clinical sleep medicine practice in the U.S. are presented. The challenge for sleep specialists is maintaining the delicate balance between recommendations impacting standard of care and associated medico-legal impact with stakeholder interests from medical, regulatory, industry and public perspectives while providing high quality and efficient care. Citation: Colvin LJ, Collop NA. Commercial motor vehicle driver obstructive sleep apnea screening and treatment in the United States: an update and recommendation overview. J Clin Sleep Med 2016;12(1):113–125. PMID:26094916

Exposure of the human body to professional and domestic induction cooktops compared to the basic restrictions.

PubMed

Christ, Andreas; Guldimann, René; Bühlmann, Barbara; Zefferer, Marcel; Bakker, Jurriaan F; van Rhoon, Gerard C; Kuster, Niels

2012-12-01

We investigated whether domestic and professional induction cooktops comply with the basic restrictions defined by the International Commission on Non-Ionizing Radiation Protection (ICNIRP). Based on magnetic field measurements, a generic numerical model of an induction cooktop was derived in order to model user exposure. The current density induced in the user was simulated for various models and distances. We also determined the exposure of the fetus and of young children. While most measured cooktops comply with the public exposure limits at the distance specified by the International Electrotechnical Commission (standard IEC 62233), the majority exceeds them at closer distances, some of them even the occupational limits. The maximum current density in the tissue of the user significantly exceeds the basic restrictions for the general public, reaching the occupational level. The exposure of the brains of young children reaches the order of magnitude of the limits for the general public. For a generic worst-case cooktop compliant with the measurement standards, the current density exceeds the 1998 ICNIRP basic restrictions by up to 24 dB or a factor of 16. The brain tissue of young children can be overexposed by 6 dB or a factor of 2. The exposure of the tissue of the central nervous system of the fetus can exceed the limits for the general public if the mother is exposed at occupational levels. This demonstrates that the methodology for testing induction cooktops according to IEC 62233 contradicts the basic restrictions. This evaluation will be extended considering Copyright © 2012 Wiley Periodicals, Inc.

[The System and Human Resources for Occupational Health in Thailand - For Japanese Enterprises to Manage Proper Occupational Health Activities at Overseas Workplaces].

PubMed

Fukai, Nanae; Hiraoka, Ko; Kajiki, Shigeyuki; Kobayashi, Yuichi; Thanachokswang, Chatchai; Arphorn, Sara; Uehara, Msamichi; Nakanishi, Shigemoto; Mori, Koji

We collected information necessary for conducting occupational health activities in Thailand with regard to occupational safety and health management systems (OSHMS). Based on an information collection check sheet developed in our previous research, we conducted a literature research and visited four local business bases, one ISO certification body and two higher educational institutions. The legal framework concerning occupational health in Thailand consists of the Occupational Safety, Health and Environment Act of 2011 and 13 ordinances from the Ministry of Labor under that act. The original OSHMS standards for Thailand have been published, and the number of companies, especially large ones, introducing systems conforming to these standards has increased in recent years. For occupational health specialists, there are training programs for specialized occupational health physicians, professional safety officers and occupational nurses. Professional safety officers also play a central role in occupational health in the workplace. In Thailand, it is necessary to ensure compliance with related acts and regulations, and to conduct voluntary activities that satisfy workplace conditions as based on the OSHMS standards. Additionally, to improve occupational health performance, it is essential to use high-quality external services and/or occupational health professionals. Headquarters of Japanese companies have considered taking countermeasures such as recommending active use of professional safety officers, as well as issuing global standards.

The OSHA standard setting process: role of the occupational health nurse.

PubMed

Klinger, C S; Jones, M L

1994-08-01

1. Occupational health nurses are the health professionals most often involved with the worker who suffers as a result of ineffective or non-existent safety and health standards. 2. Occupational health nurses are familiar with health and safety standards, but may not understand or participate in the rulemaking process used to develop them. 3. Knowing the eight basic steps of rulemaking and actively participating in the process empowers occupational health nurses to influence national policy decisions affecting the safety and health of millions of workers. 4. By actively participating in rulemaking activities, occupational health nurses also improve the quality of occupational health nursing practice and enhance the image of the nursing profession.

Revision of the Competency Standards for Occupational Therapy Driver Assessors: An overview of the evidence for the inclusion of cognitive and perceptual assessments within fitness-to-drive evaluations.

PubMed

Fields, Sally M; Unsworth, Carolyn A

2017-08-01

Determination of fitness-to-drive after illness or injury is a complex process typically requiring a comprehensive driving assessment, including off-road and on-road assessment components. The competency standards for occupational therapy driver assessors (Victoria, Australia) define the requirements for performance of a comprehensive driving assessment, and we are currently revising these. Assessment of cognitive and perceptual skills forms an important part of the off-road assessment. The aim of this systematic review of systematic reviews (known as an overview) is to identify what evidence exists for including assessment of cognitive and perceptual skills within fitness-to-drive evaluations to inform revision of the competency standards. Five electronic databases (MEDLINE, CINAHL, PsycINFO, The Cochrane Library, OT Seeker) were systematically searched. Systematic review articles were appraised by two authors for eligibility. Methodological quality was independently assessed using the AMSTAR tool. Narrative analysis was conducted to summarise the content of eligible reviews. A total of 1228 results were retrieved. Fourteen reviews met the inclusion criteria. Reviews indicated that the components of cognition and perception most frequently identified as being predictive of fitness-to-drive were executive function (n = 13), processing speed (n = 12), visuospatial skills, attention, memory and mental flexibility (n = 11). Components less indicative were perception, concentration (n = 10), praxis (n = 9), language (n = 7) and neglect (n = 6). This overview of systematic reviews supports the inclusion of assessment of a range of cognitive and perceptual skills as key elements in a comprehensive driver assessment and therefore should be included in the revised competency standards for occupational therapy driver assessors. © 2017 Occupational Therapy Australia.

77 FR 72998 - Policy Statement on Occupational Safety and Health Standards for Aircraft Cabin Crewmembers

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-07

... aircraft by the Occupational Safety and Health Administration (OSHA). This policy statement will enhance occupational safety and health in the aircraft cabin by establishing the extent to which OSHA requirements may... [Docket No.: FAA-2012-0953] Policy Statement on Occupational Safety and Health Standards for Aircraft...

Lead exposure in a tank demolition crew: implications for the new OSHA construction lead standard.

PubMed

Waller, K; Osorio, A M; Jones, J

1994-11-01

The Federal Occupational Safety and Health Administration (OSHA) has recently extended the basic health and safety provisions of the OSHA lead standard for general industry to workers in the construction industry. In this report we describe a tank demolition worksite that midway through the project strengthened its lead exposure control activities to a level that approximated the current lead standard. Of 12 tested ironworkers and laborers who worked at the site before the change, zinc protoporphyrin levels increased and seven developed blood lead levels (BLL) > 50 micrograms/dL. After the change these workers' BLLs declined. Six workers hired after the change did not experience increases in zinc protoporphyrin and none developed BLL > 25 micrograms/dL. The experience at this worksite demonstrates the usefulness and feasibility of implementing the current lead standard in construction settings.

Overview (this manuscript is an overview of an ASTM ...

EPA Pesticide Factsheets

The Symposium on Developing Consensus Standards for Measuring Chemical Emissions from Spray Polyurethane Foam (SPF) Insulation was held on April 30th and May 1, 2015. Sponsored by ASTM Committee D22 on Air Quality, the symposium was held in Anaheim, CA, in conjunction with the standards development meetings of the Committee. ASTM D22.05 is developing tools to answer fundamental questions: what is emitted from SPF, how long do the emissions persist, how does ventilation impact concentrations and potential exposures? How can we model these processes to address the multiplicity of products, applications, and environmental conditions that may impact exposure to emissions over the life cycle of the material? These are complex and interrelated questions that have challenged the indoor environments research community for many years. Objectives of Symposium: Standardized methods are needed to assess the potential impacts of SPF insulation products on indoor air quality, establish re-entry times for trade workers or re-occupancy times for building occupants after product installation and to evaluate post-occupancy ventilation. The objective of the symposium was to provide a forum for the exchange of ideas from SPF manufacturers, regulatory agencies, indoor air quality professionals, testing labs, air quality consultants, instrument vendors and other stakeholders. Following the presentations on the current status of measuring emissions from SPF insulation, participants di

Does unbelted safety requirement affect protection for belted occupants?

PubMed

Hu, Jingwen; Klinich, Kathleen D; Manary, Miriam A; Flannagan, Carol A C; Narayanaswamy, Prabha; Reed, Matthew P; Andreen, Margaret; Neal, Mark; Lin, Chin-Hsu

2017-05-29

Federal regulations in the United States require vehicles to meet occupant performance requirements with unbelted test dummies. Removing the test requirements with unbelted occupants might encourage the deployment of seat belt interlocks and allow restraint optimization to focus on belted occupants. The objective of this study is to compare the performance of restraint systems optimized for belted-only occupants with those optimized for both belted and unbelted occupants using computer simulations and field crash data analyses. In this study, 2 validated finite element (FE) vehicle/occupant models (a midsize sedan and a midsize SUV) were selected. Restraint design optimizations under standardized crash conditions (U.S.-NCAP and FMVSS 208) with and without unbelted requirements were conducted using Hybrid III (HIII) small female and midsize male anthropomorphic test devices (ATDs) in both vehicles on both driver and right front passenger positions. A total of 10 to 12 design parameters were varied in each optimization using a combination of response surface method (RSM) and genetic algorithm. To evaluate the field performance of restraints optimized with and without unbelted requirements, 55 frontal crash conditions covering a greater variety of crash types than those in the standardized crashes were selected. A total of 1,760 FE simulations were conducted for the field performance evaluation. Frontal crashes in the NASS-CDS database from 2002 to 2012 were used to develop injury risk curves and to provide the baseline performance of current restraint system and estimate the injury risk change by removing the unbelted requirement. Unbelted requirements do not affect the optimal seat belt and airbag design parameters in 3 out of 4 vehicle/occupant position conditions, except for the SUV passenger side. Overall, compared to the optimal designs with unbelted requirements, optimal designs without unbelted requirements generated the same or lower total injury risks for belted occupants depending on statistical methods used for the analysis, but they could also increase the total injury risks for unbelted occupants. This study demonstrated potential for reducing injury risks to belted occupants if the unbelted requirements are eliminated. Further investigations are necessary to confirm these findings.

Occupational therapy influence on a carer peer support model in a clinical mental health service.

PubMed

Bourke, Cate; Sanders, Bronwyn; Allchin, Becca; Lentin, Primrose; Lang, Shannon

2015-10-01

Current policy frameworks call for the participation of consumers and carers in all levels of mental health service delivery in Australia. Such inclusion leads to better outcomes for all, however, it is recognised that carers have needs and occupations beyond their carer role. The aim of this article is to describe an innovative carer peer support program developed by a group of occupational therapists. The article describes the rationale, phases of development and the role that occupational therapists played in developing and sustaining the model. This is followed by an exploration of the occupational therapy attitudes, knowledge and skills that contributed to the conceptualisation and implementation of the model. Five occupational therapists engaged in a review process involving documentation, literature review, evaluation, reflection and discussion. Four of the occupational therapists had either coordinated or managed the service described. The fifth author facilitated the process. Review of the model indicates it equips carers to perform their caring occupation and helps carers recognise the need for occupations beyond caring, for their health and wellbeing. Employing carers as paid workers values their 'real life' experience in their caring occupation. Findings also illustrate that the attitudes, knowledge, skills and competency standards of occupational therapists are well suited in enabling this emerging area of service delivery. Although this model has been developed in a clinical mental health setting, the key principles could be applied with carers or consumers across a variety of settings in which occupational therapists are employed. © 2015 Occupational Therapy Australia.

Recruitment standards and practices in occupational therapy, 1900-1930.

PubMed

Colman, W

1990-08-01

Debate regarding recruitment standards and practices exemplifies various visions of practice that exist within a profession. In occupational therapy, early recruitment criteria provide an example of how the field's founders envisioned the professional practitioner. As occupational therapy grew in membership throughout the 1920s, that vision was challenged. This paper identifies and describes the recruitment ideas expressed by both the founders of occupational therapy and their challengers from 1900 to 1930 and suggests the influence of their ideas on recruitment standards.

29 CFR 1928.1 - Purpose and scope.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) OCCUPATIONAL SAFETY AND HEALTH STANDARDS FOR AGRICULTURE General § 1928.1 Purpose and scope. This part contains occupational safety and health standards applicable to agricultural operations. ...

Situation analysis of occupational and environmental health laboratory accreditation in Thailand.

PubMed

Sithisarankul, Pornchai; Santiyanont, Rachana; Wongpinairat, Chongdee; Silva, Panadda; Rojanajirapa, Pinnapa; Wangwongwatana, Supat; Srinetr, Vithet; Sriratanaban, Jiruth; Chuntutanon, Swanya

2002-06-01

The objective of this study was to analyze the current situation of laboratory accreditation (LA) in Thailand, especially on occupational and environmental health. The study integrated both quantitative and qualitative approaches. The response rate of the quantitative questionnaires was 54.5% (226/415). The majority of the responders was environmental laboratories located outside hospital and did not have proficiency testing. The majority used ISO 9000, ISO/IEC 17025 or ISO/ EEC Guide 25, and hospital accreditation (HA) as their quality system. However, only 30 laboratories were currently accredited by one of these systems. Qualitative research revealed that international standard for laboratory accreditation for both testing laboratory and calibration laboratory was ISO/IEC Guide 25, which has been currently revised to be ISO/IEC 17025. The National Accreditation Council (NAC) has authorized 2 organizations as Accreditation Bodies (ABs) for LA: Thai Industrial Standards Institute, Ministry of Industry, and Bureau of Laboratory Quality Standards, Department of Medical Sciences, Ministry of Public Health. Regarding LA in HA, HA considered clinical laboratory as only 1 of 31 items for accreditation. Obtaining HA might satisfy the hospital director and his management team, and hence might actually be one of the obstacles for the hospital to further improve their laboratory quality system and apply for ISO/IEC 17025 which was more technically oriented. On the other hand, HA may be viewed as a good start or even a pre-requisite for laboratories in the hospitals to further improve their quality towards ISO/IEC 17025. Interviewing the director of NAC and some key men in some large laboratories revealed several major problems of Thailand's LA. Both Thai Industrial Standards Institute and Bureau of Laboratory Quality Standards did not yet obtain Mutual Recognition Agreement (MRA) with other international ABs. Several governmental bodies had their own standards and accreditation systems, and did not accept other bodies' standards and systems. This put a burden to private laboratories because they had to apply and get accredited from several governmental bodies, but still had to apply and get accredited from international ABs especially for those dealing with exports. There were only few calibration laboratories, not enough for supporting the calibration required for the equipment in testing laboratories' LA. Purchasing proficiency testing specimens from abroad was very expensive, and often got into troubles with the customs duty procedures. The authors recommend some strategies and activities to improve laboratory accreditation in Thailand. Improvement in occupational and environmental health laboratories would essentially be beneficial to laboratory accreditation of other areas such as clinical laboratory.

The European Status Quo in legal recognition and patient-care services of occupational skin cancer.

PubMed

Ulrich, C; Salavastru, C; Agner, T; Bauer, A; Brans, R; Crepy, M N; Ettler, K; Gobba, F; Goncalo, M; Imko-Walczuk, B; Lear, J; Macan, J; Modenese, A; Paoli, J; Sartorelli, P; Stageland, K; Weinert, P; Wroblewski, N; Wulf, H C; John, S M

2016-04-01

Skin cancer is the most common malignancy in Caucasian populations worldwide and ultraviolet radiation (UVR) is known for being the number one carcinogen. As, especially in outdoor workers, UVR is an inevitable carcinogen, the prevention and management of UVR-related skin cancers in these at-risk populations represent a collective challenge for dermatologists and healthcare policymakers likewise. To provide an overview on the current regulations on the acknowledgement and management of work-related skin cancer in 11 European countries. Dermatologists from 11 countries networking within the EU Horizon 2020 COST Action TD1206 'StanDerm' contributed to a standardized survey regarding current national regulations, implemented for the recognition, prevention and management as well as possible compensation regulations in their individual country of residence. Ten of 11 participating countries in this survey reported the existence of an established programme available on certain occupational diseases; work-related skin diseases were only specifically recognized in eight countries. Seven of 11 countries recognize cutaneous squamous cell carcinoma in outdoor workers as 'occupational skin cancer'. Basal cell carcinoma (6 of 11), actinic keratosis (5 of 11), Bowen's disease (5 of 11) and malignant melanoma (5 of 11) are not as regularly approved as potentially 'work-induced'. Only a few of the countries included into this survey established a general documentation system (national registry) on occupational skin diseases. So far, representatives of only three countries of this survey referred to a specific established national programme for the prevention, management or compensation of occupational skin cancers acquired during work-related UVR exposure. This survey highlights the need for mandatory regulations on the prevention, management and potential compensation of work-related UV-induced skin cancer across Europe. Against the background of a joint European domestic market, equal standards of occupational safety across Europe should include binding regulations for the protection and management of work-related skin cancer. The design of a common regulation to meet the increasing incidence of skin cancers in outdoor workers should become part of the European agenda, ensuring equal working and living conditions in the member states. © 2016 European Academy of Dermatology and Venereology.

Standards of care for occupational asthma: an update.

PubMed

Fishwick, David; Barber, Christopher Michael; Bradshaw, Lisa M; Ayres, Jon G; Barraclough, Richard; Burge, Sherwood; Corne, Jonathan M; Cullinan, Paul; Frank, Timothy Laszlo; Hendrick, David; Hoyle, Jennifer; Curran, Andrew D; Niven, Robert; Pickering, Tony; Reid, Peter; Robertson, Alastair; Stenton, Chris; Warburton, Christopher J; Nicholson, Paul J

2012-03-01

The British Thoracic Society (BTS) Standards of Care (SoC) Committee produced a standard of care for occupational asthma (OA) in 2008, based on a systematic evidence review performed in 2004 by the British Occupational Health Research Foundation (BOHRF). BOHRF updated the evidence base from 2004-2009 in 2010. This article summarises the changes in evidence and is aimed at physicians, nurses and other healthcare professionals in primary and secondary care, occupational health and public health and at employers, workers and their health, safety and other representatives. Various recommendations and evidence ratings have changed in the management of asthma that may have an occupational cause.

Correlates of occupational injuries for various jobs in railway workers: a case-control study.

PubMed

Chau, Nearkasen; Mur, Jean-Marie; Touron, Christian; Benamghar, Lahoucine; Dehaene, Dominique

2004-07-01

Few studies have simultaneously addressed the role of occupational factors, individual characteristics and living conditions in occupational injuries, and to the best of our knowledge none on railway workers. This survey assessed the roles of these factors in various types of injuries and for various jobs in French railway workers. This case-control study was conducted on 1,305 male workers with an occupational injury during a one-year period and 1,305 male controls. A standardized questionnaire was administrated by an occupational physician. Data were analyzed by the logistic regression method. The significant factors found for all the injuries combined were: young age (<30 yr) (adjusted odds ratio 1.47, 95% CI 1.01-2.14), 5 yr or less in present job (1.43, 1.15-1.78), sleep disorders (1.30, 1.08-1.57), current smoker (1.27, 1.08-1.50), and no do-it-yourself or gardening activity (1.23, 1.02-1.48). Young age, sleep disorders, and smoking were common for several types of injuries. The role of these factors differed between various job categories. Among injured workers sick leaves of eight days or over were more frequent in current smokers and overweight subjects. In conclusion, young age, lack of experience, job dissatisfaction, sleep disorders, smoking, and lack of physical activity increase the risk of occupational injuries. The risks induced were related with jobs. Preventive measures concerning work conditions and these factors could be conducted in railway workers generally, and especially in workers most at risk. The occupational physician could make workers more sensitive to these risks and help them to improve their living conditions during medical examinations.

Mapping the literature of occupational therapy.

PubMed Central

Reed, K L

1999-01-01

Occupational therapy, formally organized in the United States in 1917, is considered an allied health field. Mapping occupational therapy literature is part of a bibliometric project of the Medical Library Association's Nursing and Allied Health Resources Section's project for mapping the literature of allied health. Three core journals were selected from the years 1995 and 1996 and a determination was made of the extent to which the cited journal references were covered by standard indexing sources. Using Bradford's Law of Scattering three zones were created, each containing approximately one-third of the cited journal references. The results showed that three journals made up the first zone, 117 journals the second, and 657 the third. The most cited journal was the American Journal of Occupational Therapy. In the second zone, journals from twelve disciplines were identified. While MEDLINE provided the best overall indexing, the Cumulative Index to Nursing and Allied Health Literature (CINAHL) was the only database that indexed the three most cited journals plus nine of the currently active titles in occupational therapy. MEDLINE could improve its coverage of occupational therapy by indexing the journals of the British, Canadian, and Australian national associations. PMID:10427431

Study on occupational safety and health strategy for Taiwan.

PubMed

Chuang, Kuen-Yuan; Su, Teh-Sheng; Kuo, Chao-Yin; Lin, Chien-Liang; Lin, Han-Yu; Yu, Yi-Chun

2009-12-01

The aim of this study was to establish a set of occupational safety and health (OSH) issues and development policies suitable for adoption in Taiwan. A survey was conducted on a sample of 102 experts and 235 industrial work safety personnel in Taiwan for statistical analysis of the general consensus, with the results showing such consensus in 104 individual policy indicators. Our results reveal that the most appropriate targets were considered to be annual 10% reductions in the 'occupational accident disability rate', 'occupational accident injury rate' and 'occupational diseases before 2010'. Responding to the specific question of the appropriate method of achieving a reduction in the number of accidents in Taiwan, the primary consideration for 13.4% of the experts and 10.6% of the industry personnel was 'promoting OSH awareness and enhancing the overall safety culture'. As regards the current OSH policy focus, 11.2% of the experts considered 'improving OSH legislation, standards and systems' to be the most important, whilst 8.9% of the industry personnel felt that 'recognizing work stress, overwork and emerging OSH issues' were the most important.

Building a World-Class Front-Line Workforce: The Need for Occupational Skill Standards in State Workforce Preparation Programs. EQW Working Papers.

ERIC Educational Resources Information Center

Sheets, Robert G.

Establishment of a national-state system of world-class occupational skill standards is a first step in restructuring adult vocational-technical education and job training programs. Occupational skills standards provide the necessary foundation for addressing three major state policy issues: the state's proper role in private work-based training,…

29 CFR 1960.18 - Supplementary standards.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED... occupational safety and health committees. If the Secretary finds the permanent supplementary standard to be...

29 CFR 1960.18 - Supplementary standards.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED... occupational safety and health committees. If the Secretary finds the permanent supplementary standard to be...

Illinois Occupational Skill Standards: Information Technology Operate Cluster.

ERIC Educational Resources Information Center

Illinois Occupational Skill Standards and Credentialing Council, Carbondale.

This document contains Illinois Occupational Skill Standards for occupations in the Information Technology Operate Cluster (help desk support, computer maintenance and technical support technician, systems operator, application and computer support specialist, systems administrator, network administrator, and database administrator). The skill…

Associations of Occupational Attributes and Excessive Drinking

PubMed Central

Barnes, Andrew J.; Zimmerman, Frederick J.

2017-01-01

Numerous work-related drinking mechanisms have been posited and, oftentimes, examined in isolation. We combined data from over 100 occupational attributes into several factors and tested the association of these factors with measures of alcohol use. We used the NLSY79 2006 wave, a U.S. representative sample of 6,426 workers ages 41 to 49 and the 2006 Occupational Information Network database (O*NET), a nationally representative sample of nearly 1,000 occupations. We conducted exploratory factor analysis on 119 occupational attributes and found three independent workplace characteristics – physical demands, job autonomy, and social engagement - explained the majority of the variation. We then tested the association of these composite attributes with three drinking measures, before and after adjusting for gender, race/ethnicity, and a measure of human capital using count data models. We then stratified by gender and repeated our analyses. Men working in occupations with a one standard deviation higher level of physical demand (e.g. construction) reported a higher number of heavy drinking occasions (+20%, p<0.05). Job autonomy was not significantly associated with measures of alcohol use and when the combined association of higher levels of physical demand and lower levels of job autonomy was examined, modest support for job strain as a mechanism for work-related alcohol consumption was found. In our pooled sample, working in occupations with one standard deviation higher levels of social engagement was associated with lower numbers of drinking days (−9%, p<0.05) after adjustment. Physical demand and social engagement were associated with alcohol consumption measures but these relationships varied by workers’ gender. Future areas of research should include confirmatory analyses using other waves of O*Net data and replicating the current analysis in other samples of workers. If our results are validated, they suggest male workers in high physical demand occupations could be targets for intervention. PMID:23849277

Occupational and environmental risk factors for chronic rhinosinusitis: a systematic review.

PubMed

Sundaresan, Agnes S; Hirsch, Annemarie G; Storm, Margaret; Tan, Bruce K; Kennedy, Thomas L; Greene, J Scott; Kern, Robert C; Schwartz, Brian S

2015-11-01

Chronic rhinosinusitis (CRS) is a prevalent and disabling paranasal sinus disease, with a likely multifactorial etiology potentially including hazardous occupational and environmental exposures. We completed a systematic review of the occupational and environmental literature to evaluate the quality of evidence of the role that hazardous exposures might play in CRS. We searched PubMed for studies of CRS and following exposure categories: occupation, employment, work, industry, air pollution, agriculture, farming, environment, chemicals, roadways, disaster, and traffic. We abstracted information from the final set of articles across 6 primary domains: study design; population; exposures evaluated; exposure assessment; CRS definition; and results. We identified 41 articles from 1080 manuscripts: 37 occupational risk papers, 1 environmental risk paper, and 3 papers studying both categories of exposures. None of the 41 studies used a CRS definition consistent with current diagnostic guidelines. Exposure assessment was generally dependent on self-report or binary measurements of exposure based on industry of employment. Only grain, dairy, and swine operations among farmers were evaluated by more than 1 study using a common approach to defining CRS, but employment in these settings was not consistently associated with CRS. The multiple other exposures did not meet quality standards for reporting associations or were not evaluated by more than 1 study. The current state of the literature allows us to make very few conclusions about the role of hazardous occupational or environmental exposures in CRS, leaving a critical knowledge gap regarding potentially modifiable risk factors for disease onset and progression. © 2015 ARS-AAOA, LLC.

20 CFR 220.13 - Establishment of permanent disability for work in regular railroad occupation.

Code of Federal Regulations, 2010 CFR

2010-04-01

... to continue working for medical reasons by his employer has been found, under standards contained in... medical reasons. (See § 220.21 if the claimant is not currently disabled, but was previously... impairment(s); or (2) By using valid diagnostic tests accepted by the medical community as described in § 220...

Optimizing protection for rear seat occupants : assessing booster performance with realistic belt geometry using the hybrid III 6YO ATD.

DOT National Transportation Integrated Search

2011-11-01

A series of sled tests was conducted to examine the performance of booster seats under belt geometries representing the range found in the rear seats of current vehicles. Twelve tests were performed with the standard 6YO Hybrid III ATD and 29 tests w...

29 CFR 1911.1 - Purpose and scope.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) RULES OF PROCEDURE FOR PROMULGATING, MODIFYING, OR REVOKING OCCUPATIONAL SAFETY OR HEALTH STANDARDS... revoking occupational safety or health standards under section 6(b) (1), (2), (3), and (4) of the Williams...

29 CFR 1915.1 - Purpose and authority.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) OCCUPATIONAL SAFETY AND HEALTH STANDARDS FOR SHIPYARD EMPLOYMENT General Provisions § 1915.1... U.S.C. 941) and occupational safety and health standards issued by the Secretary pursuant to section...

29 CFR 1960.16 - Compliance with OSHA standards.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH... comply with all occupational safety and health standards issued under section 6 of the Act, or with...

29 CFR 1960.16 - Compliance with OSHA standards.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH... comply with all occupational safety and health standards issued under section 6 of the Act, or with...

29 CFR 1915.1 - Purpose and authority.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) OCCUPATIONAL SAFETY AND HEALTH STANDARDS FOR SHIPYARD EMPLOYMENT General Provisions § 1915.1... U.S.C. 941) and occupational safety and health standards issued by the Secretary pursuant to section...

The effects of wheelchair-seating stiffness and energy absorption on occupant frontal impact kinematics and submarining risk using computer simulation.

PubMed

Bertocci, Gina; Souza, Aaron L; Szobota, Stephanie

2003-01-01

Many wheelchair users must travel in motor vehicles while seated in their wheelchairs. The safety features of seat assemblies are key to motor vehicle occupant crash protection. Seating system properties such as strength, stiffness, and energy absorbance have been shown to have significant influence on risk of submarining. This study investigated the effects of wheelchair seat stiffness and energy absorption properties on occupant risk of submarining during a frontal motor vehicle 20 g/30 mph impact using a validated computer crash simulation model. The results indicate that wheelchair-seating stiffness and energy absorption characteristics influence occupant kinematics associated with the risk of submarining. Softer seat surfaces and relatively high energy absorption/permanent deformation were found to produce pelvis excursion trajectories associated with increased submarining risk. Findings also suggest that the current American National Standards Institute/Rehabilitation Engineering and Assistive Technology Society of North America (ANSI/RESNA) WC-19 seating integrity may not adequately assess submarining risk.

[Alcohol and work: the role of the company physician in the occupational health and safety management systems].

PubMed

Patussi, V; Muran, A

2010-01-01

The organization of safety in the working places and the increasing attention to behaviours and life styles of workers that may lead to increasing occupational risks are the pick innovative aspects of the recent changes in our country's legislation about occupational safety. In this organization, the role of the company physician is becoming more and more important and his work of evaluation beginning with the knowledge both of the working places and of the workers's lifestyles, is irreplaceable. His role in organizing the managing standards of occupational safety and health cannot be limited to health supervision but must be an essential element in risk assessment in the prevision of workplaces and of safe working conditions, in workers training and information, in organizing the control system of each business. The present paper examines--referring to the current regulation--the duties and functions of a company physician when facing the problems concerning the working risks tied to alcohol assumption.

OSHA 101: an introduction to OSHA for the occupational health nurse.

PubMed

Fell-Carlson, Deborah

2004-10-01

The OSHA standards become easy to use with experience. Occupational health nurses who are unfamiliar with the standards are better served to use them as a reference, rather than attempting to read the entire document. Many of the standards have booklets published to assist users in understanding the information. These booklets are available within the publications link of the OSHA website. Occupational health nurses who have taken the initiative to gain knowledge about OSHA and to become fluent in navigating the OSHA standards soon discover that the ability to access the information contained in the standards quickly is a marketable skill. Employers depend on occupational health nurses to develop comprehensive programs that achieve the goal of injury prevention and also meet compliance requirements. The standards contain a wealth of information to do just that.

NIOSH testimony to DOL on the Occupational Safety and Health Administration's notice of proposed rulemaking on occupational exposure to asbestos, tremolite, anthophyllite, and actinolite by R. A. Lemen, May 9, 1990

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1990-05-09

The testimony summarized information pertinent to the proposed rulemaking to remove nonasbestiform tremolite, anthophyllite, and actinolite from the asbestos standard. NIOSH concludes that on the basis of current data that cleavage fragments of the appropriate aspect ratio and length from the nonasbestiform minerals should be considered as hazardous as fibers from the asbestiform minerals. No scientifically valid health evidence was found for removing from the asbestos standard cleavage fragments that become airborne when nonasbestiform tremolite, anthophyllite and actinolite are mined, milled and used, and that meet the microscopic definition of a fiber. The risk of cancer from such exposures warrantsmore » limiting exposures to these minerals to the lowest feasible concentration. A glossary of terms is provided in an appendix.« less

Health status of Air Force veterans occupationally exposed to herbicides in Vietnam: II. Mortality

DOE Office of Scientific and Technical Information (OSTI.GOV)

Michalek, J.E.; Wolfe, W.H.; Miner, J.C.

1990-10-10

The Air Force Health Study is a 20-year comprehensive assessment of the current health of Air Force veterans of Operation Ranch Hand, the unit responsible for aerial spraying of herbicides in Vietnam. This report compares the noncombat mortality of 1261 Ranch Hand veterans to that of a comparison population of 19,101 other Air Force veterans primarily involved in cargo missions in Southeast Asia but who were not exposed to herbicides. The indirectly standardized all-cause death rate among Ranch Hands is 2.5 deaths per 1,000 person-years, the same as that among comparison subjects. After adjustment for age, rank, and occupation, themore » all-cause standardized mortality ratio was 1.0. In adjusted cause-specific analyses, the authors found no significant group differences regarding accidental, malignant neoplasm, and circulatory deaths. These data are not supportive to a hypothesis of increases mortality among Ranch Hands.« less

Occupational-Specific Strength Predicts Astronaut-Related Task Performance in a Weighted Suit.

PubMed

Taylor, Andrew; Kotarsky, Christopher J; Bond, Colin W; Hackney, Kyle J

2018-01-01

Future space missions beyond low Earth orbit will require deconditioned astronauts to perform occupationally relevant tasks within a planetary spacesuit. The prediction of time-to-completion (TTC) of astronaut tasks will be critical for crew safety, autonomous operations, and mission success. This exploratory study determined if the addition of task-specific strength testing to current standard lower body testing would enhance the prediction of TTC in a 1-G test battery. Eight healthy participants completed NASA lower body strength tests, occupationally specific strength tests, and performed six task simulations (hand drilling, construction wrenching, incline walking, collecting weighted samples, and dragging an unresponsive crewmember to safety) in a 48-kg weighted suit. The TTC for each task was recorded and summed to obtain a total TTC for the test battery. Linear regression was used to predict total TTC with two models: 1) NASA lower body strength tests; and 2) NASA lower body strength tests + occupationally specific strength tests. Total TTC of the test battery ranged from 20.2-44.5 min. The lower body strength test alone accounted for 61% of the variability in total TTC. The addition of hand drilling and wrenching strength tests accounted for 99% of the variability in total TTC. Adding occupationally specific strength tests (hand drilling and wrenching) to standard lower body strength tests successfully predicted total TTC in a performance test battery within a weighted suit. Future research should couple these strength tests with higher fidelity task simulations to determine the utility and efficacy of task performance prediction.Taylor A, Kotarsky CJ, Bond CW, Hackney KJ. Occupational-specific strength predicts astronaut-related task performance in a weighted suit. Aerosp Med Hum Perform. 2018; 89(1):58-62.

Vocational outcome following spinal cord injury.

PubMed

Conroy, L; McKenna, K

1999-09-01

Non-experimental (ex post facto) survey research design involving the use of a fixed alternative format questionnaire. To investigate variables influencing vocational outcome, to identify barriers to gaining and sustaining employment and to identify the effects of variables on the type of work engaged in following spinal cord injury. The two sets of independent variables considered were, individual and injury-related factors (age at onset of injury, time since injury, extent/level of injury, highest educational qualification achieved pre-injury, and pre-injury occupation) and circumstantial factors (means of transport, access difficulties, perceived workplace discrimination, financial disincentives to work and perceived level of skill). The Princess Alexandra Hospital Spinal Injuries Unit, Queensland, Australia. Data on the variables and the vocational outcomes of having ever worked or studied post-injury, current employment status and post-injury occupation were obtained from survey responses. Demographical and medical data were gathered from medical records. Forward stepwise logistic regression revealed that having ever worked or studied post-injury was associated with all individual and injury-related factors except pre-injury occupation, and two circumstantial factors, namely means of transport and access difficulties. Current employment was associated with all circumstantial factors as well as age at injury and pre-injury occupation. Standard multiple regression analyses revealed that post-injury occupation was correlated with all individual and injury-related factors as well as means of transport and perceived workplace discrimination. Tailored rehabilitation programs for individuals with characteristics associated with less successful vocational outcomes may facilitate their employment status after injury.

29 CFR 1990.151 - Model standard pursuant to section 6(b) of the Act.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 9 2014-07-01 2014-07-01 false Model standard pursuant to section 6(b) of the Act. 1990... OCCUPATIONAL CARCINOGENS Model Standards § 1990.151 Model standard pursuant to section 6(b) of the Act. Occupational Exposure to ________ Permanent Standard (insert section number of standard) (a) Scope and...

29 CFR 1990.151 - Model standard pursuant to section 6(b) of the Act.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 29 Labor 9 2013-07-01 2013-07-01 false Model standard pursuant to section 6(b) of the Act. 1990... OCCUPATIONAL CARCINOGENS Model Standards § 1990.151 Model standard pursuant to section 6(b) of the Act. Occupational Exposure to ________ Permanent Standard (insert section number of standard) (a) Scope and...

29 CFR 1990.151 - Model standard pursuant to section 6(b) of the Act.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 29 Labor 9 2012-07-01 2012-07-01 false Model standard pursuant to section 6(b) of the Act. 1990... OCCUPATIONAL CARCINOGENS Model Standards § 1990.151 Model standard pursuant to section 6(b) of the Act. Occupational Exposure to ________ Permanent Standard (insert section number of standard) (a) Scope and...

Real-Time Occupancy Change Analyzer

DOE Office of Scientific and Technical Information (OSTI.GOV)

2005-03-30

The Real-Time Occupancy Change Analyzer (ROCA) produces an occupancy grid map of an environment around the robot, scans the environment to generate a current obstacle map relative to a current robot position, and converts the current obstacle map to a current occupancy grid map. Changes in the occupancy grid can be reported in real time to support a number of tracking capabilities. The benefit of ROCA is that rather than only providing a vector to the detected change, it provides the actual x,y position of the change.

Development of cost estimation tools for total occupational safety and health activities and occupational health services: cost estimation from a corporate perspective.

PubMed

Nagata, Tomohisa; Mori, Koji; Aratake, Yutaka; Ide, Hiroshi; Ishida, Hiromi; Nobori, Junichiro; Kojima, Reiko; Odagami, Kiminori; Kato, Anna; Tsutsumi, Akizumi; Matsuda, Shinya

2014-01-01

The aim of the present study was to develop standardized cost estimation tools that provide information to employers about occupational safety and health (OSH) activities for effective and efficient decision making in Japanese companies. We interviewed OSH staff members including full-time professional occupational physicians to list all OSH activities. Using activity-based costing, cost data were obtained from retrospective analyses of occupational safety and health costs over a 1-year period in three manufacturing workplaces and were obtained from retrospective analyses of occupational health services costs in four manufacturing workplaces. We verified the tools additionally in four workplaces including service businesses. We created the OSH and occupational health standardized cost estimation tools. OSH costs consisted of personnel costs, expenses, outsourcing costs and investments for 15 OSH activities. The tools provided accurate, relevant information on OSH activities and occupational health services. The standardized information obtained from our OSH and occupational health cost estimation tools can be used to manage OSH costs, make comparisons of OSH costs between companies and organizations and help occupational health physicians and employers to determine the best course of action.

76 FR 4944 - Ionizing Radiation Standard; Extension of the Office of Management and Budget's (OMB) Approval of...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-27

... Radiation Standard protect workers from the adverse health effects that may result from occupational... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2010-0030... Information Collection (Paperwork) Requirements AGENCY: Occupational Safety and Health Administration (OSHA...

Human Services. Georgia Core Standards for Occupational Clusters.

ERIC Educational Resources Information Center

Georgia Univ., Athens. Dept. of Occupational Studies.

This document lists core standards and occupational knowledge and skills that have been identified and validated by industry as necessary to all Georgia students in secondary-level human services occupations programs. First, foundation skills are grouped as follows: basic skills (reading, writing, arithmetic/mathematics, listening, speaking);…

Health Care. Georgia Core Standards for Occupational Clusters.

ERIC Educational Resources Information Center

Georgia Univ., Athens. Dept. of Occupational Studies.

This document lists core standards and occupational knowledge and skills that have been identified/validated by industry as necessary to all Georgia students in secondary-level health care occupations programs. First, foundation skills are grouped as follows: basic skills (reading, writing, arithmetic/mathematics, listening, speaking); thinking…

Dietary Differences in Male Workers among Smaller Occupational Groups within Large Occupational Categories: Findings from the Japan Environment and Children's Study (JECS).

PubMed

Tanaka, Rie; Tsuji, Mayumi; Senju, Ayako; Kusuhara, Koichi; Kawamoto, Toshihiro

2018-05-11

Studies examining workers' diet according to smaller occupational groups within "large occupational categories" are sparse. The aim of this study was to examine the potential differences in workers' diets based on the classification of workers into smaller occupational groups that comprise "large occupational categories". The subjects of this study were working fathers who had participated in the Japan Environment and Children's Study (N = 38,656). Energy and nutrient intake were calculated based on data collected from the Food Frequency Questionnaire. Occupations were classified according to the Japanese Standard Occupational Classification. Logistic regression analyses were performed to examine the adherence to current dietary recommendations within smaller occupational groups. In particular, significant differences were observed among the categorical groups of "professional and engineering workers", "service workers", and "agricultural, forestry, and fishery workers". In "professional and engineering workers", teachers showed higher odds of adherence to calcium intake recommendations compared with nurses (OR, 2.54; 95% CI, 2.02⁻3.14; p < 0.001). In "agricultural, forestry, and fishery workers", agriculture workers showed higher odds of adherence to calcium (OR, 2.15; 95% CI, 1.46⁻3.15; p < 0.001) and vitamin C (OR 1.90, 95% CI 1.31⁻2.74, p = 0.001) intake recommendations compared with forestry and fishery workers. These findings may be beneficial from a research perspective as well as in the development of more effective techniques to improve workers' diet and health.

Analysis of occupational asbestos exposure and lung cancer mortality using the g formula.

PubMed

Cole, Stephen R; Richardson, David B; Chu, Haitao; Naimi, Ashley I

2013-05-01

We employed the parametric G formula to analyze lung cancer mortality in a cohort of textile manufacturing workers who were occupationally exposed to asbestos in South Carolina. A total of 3,002 adults with a median age of 24 years at enrollment (58% male, 81% Caucasian) were followed for 117,471 person-years between 1940 and 2001, and 195 lung cancer deaths were observed. Chrysotile asbestos exposure was measured in fiber-years per milliliter of air, and annual occupational exposures were estimated on the basis of detailed work histories. Sixteen percent of person-years involved exposure to asbestos, with a median exposure of 3.30 fiber-years/mL among those exposed. Lung cancer mortality by age 90 years under the observed asbestos exposure was 9.44%. In comparison with observed asbestos exposure, if the facility had operated under the current Occupational Safety and Health Administration asbestos exposure standard of <0.1 fibers/mL, we estimate that the cohort would have experienced 24% less lung cancer mortality by age 90 years (mortality ratio = 0.76, 95% confidence interval: 0.62, 0.94). A further reduction in asbestos exposure to a standard of <0.05 fibers/mL was estimated to have resulted in a minimal additional reduction in lung cancer mortality by age 90 years (mortality ratio = 0.75, 95% confidence interval: 0.61, 0.92).

Analysis of Occupational Asbestos Exposure and Lung Cancer Mortality Using the G Formula

PubMed Central

Cole, Stephen R.; Richardson, David B.; Chu, Haitao; Naimi, Ashley I.

2013-01-01

We employed the parametric G formula to analyze lung cancer mortality in a cohort of textile manufacturing workers who were occupationally exposed to asbestos in South Carolina. A total of 3,002 adults with a median age of 24 years at enrollment (58% male, 81% Caucasian) were followed for 117,471 person-years between 1940 and 2001, and 195 lung cancer deaths were observed. Chrysotile asbestos exposure was measured in fiber-years per milliliter of air, and annual occupational exposures were estimated on the basis of detailed work histories. Sixteen percent of person-years involved exposure to asbestos, with a median exposure of 3.30 fiber-years/mL among those exposed. Lung cancer mortality by age 90 years under the observed asbestos exposure was 9.44%. In comparison with observed asbestos exposure, if the facility had operated under the current Occupational Safety and Health Administration asbestos exposure standard of <0.1 fibers/mL, we estimate that the cohort would have experienced 24% less lung cancer mortality by age 90 years (mortality ratio = 0.76, 95% confidence interval: 0.62, 0.94). A further reduction in asbestos exposure to a standard of <0.05 fibers/mL was estimated to have resulted in a minimal additional reduction in lung cancer mortality by age 90 years (mortality ratio = 0.75, 95% confidence interval: 0.61, 0.92). PMID:23558355

Military Personnel: DOD Is Expanding Combat Service Opportunities for Women, but Should Monitor Long-Term Integration Progress

DTIC Science & Technology

2015-07-01

steps to identify and mitigate potential challenges; (2) extent the services’ efforts to validate gender -neutral occupational standards are...to address statutory and Joint Staff requirements for validating gender -neutral occupational standards. GAO identified five elements required for...SOCOM Have Studies Underway to Validate Gender -Neutral Occupational Standards 21 DOD Is Providing Oversight of Integration Efforts, but Has Not

29 CFR 1910.95 - Occupational noise exposure.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS Occupational Health and Environmental Control § 1910.95 Occupational... three methods developed by the National Institute for Occupational Safety and Health (NIOSH), which are...

29 CFR 1952.360 - Description of the plan as initially approved.

Code of Federal Regulations, 2011 CFR

2011-07-01

.... It adopts the definition of occupational safety and health issues expressed in § 1909.2(c)(1) of this... Section 1952.360 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH... conflict between Radiation Protection Act standards and occupational safety and health standards, employees...

29 CFR 1952.360 - Description of the plan as initially approved.

Code of Federal Regulations, 2010 CFR

2010-07-01

.... It adopts the definition of occupational safety and health issues expressed in § 1909.2(c)(1) of this... Section 1952.360 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH... conflict between Radiation Protection Act standards and occupational safety and health standards, employees...

29 CFR 1960.19 - Other Federal agency standards affecting occupational safety and health.

Code of Federal Regulations, 2010 CFR

2010-07-01

... safety and health. 1960.19 Section 1960.19 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Standards § 1960.19 Other Federal...

29 CFR 1960.19 - Other Federal agency standards affecting occupational safety and health.

Code of Federal Regulations, 2011 CFR

2011-07-01

... safety and health. 1960.19 Section 1960.19 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Standards § 1960.19 Other Federal...

Transportation of natural and other gases and liquids by pipeline occupational safety and health standards

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1979-05-17

The U.S. Materials Transportation Bureau (MTB) withdraws an advanced notice of proposed rulemaking (ANPR) which requested advice, recommendations, and information relating to the issuance of additional occupational safety and health standards for the protection of employees engaged in the construction, operation, and maintenance of pipeline systems and facilities used in the transportation of hazardous materials. Comments submitted in response to the ANPR indicated that the issuance of additional occupational safety and health standards by the MTB would be a duplication of the U.S. Occupational Safety and Health Administration's efforts and would increase the possibility of jurisdictional disputes. Since the MTB'smore » present standards development efforts are primarily directed at public safety (as opposed to occupational safety) by regulating pipeline design, construction, operation, and maintenance activities, the MTB withdraws the ANPR.« less

Socioeconomic and Geographic Patterning of Smoking Behaviour in Canada: A Cross-Sectional Multilevel Analysis

PubMed Central

Corsi, Daniel J.; Lear, Scott A.; Chow, Clara K.; Subramanian, S. V.; Boyle, Michael H.; Teo, Koon K.

2013-01-01

Objective To describe the socioeconomic and geographic distribution of smoking behaviour in Canada among 19,383 individuals (51% women) aged 15–85 years. Methods Current smoking and quitting were modeled using standard and multilevel logistic regression. Markers of socioeconomic status (SES) were education and occupation. Geography was defined by Canadian Provinces. Results The adjusted prevalence of current smoking was 20.2% (95% confidence interval [CI]: 18.8–21.7) and 63.7% (95% CI: 61.1–66.3) of ever smokers had quit. Current smoking decreased and quitting increased with increasing SES. The adjusted prevalence of current smoking was 32.8% (95% CI: 28.4–37.5) among the least educated compared to 11.0% (95% CI: 8.9–13.4) for the highest educated. Among the least educated, 53.0% (95% CI: 46.8–59.2) had quit, rising to 68.7% (95% CI: 62.7–74.1) for the most educated. There was substantial variation in current smoking and quitting at the provincial level; current smoking varied from 17.9% in British Columbia to 26.1% in Nova Scotia, and quitting varied from 57.4% in Nova Scotia to 67.8% in Prince Edward Island. Nationally, increasing education and occupation level were inversely associated with current smoking (odds ratio [OR] 0.64, 95% CI: 0.60–0.68 for education; OR 0.82, 95% CI: 0.77–0.87 for occupation) and positively associated with quitting (OR 1.27, 95% CI: 1.16–1.40 for education; OR 1.20, 95% CI: 1.12–1.27 for occupation). These associations were consistent in direction across provinces although with some variability in magnitude. Conclusion Our findings indicate that socioeconomic inequalities in smoking have persisted in Canada; current smoking was less likely and quitting was more likely among the better off groups and in certain provinces. Current prevention and cessation policies have not been successful in improving the situation for all areas and groups. Future efforts to reduce smoking uptake and increase cessation in Canada will need consideration of socioeconomic and geographic factors to be successful. PMID:23469038

29 CFR 1915.155 - Head protection.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) OCCUPATIONAL SAFETY AND HEALTH STANDARDS FOR SHIPYARD EMPLOYMENT Personal Protective Equipment... National Standards Institute (ANSI) Z89.1-2009, “American National Standard for Industrial Head Protection...

29 CFR 1915.155 - Head protection.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) OCCUPATIONAL SAFETY AND HEALTH STANDARDS FOR SHIPYARD EMPLOYMENT Personal Protective Equipment... National Standards Institute (ANSI) Z89.1-2009, “American National Standard for Industrial Head Protection...

Cause-specific mortality by occupational skill level in Canada: a 16-year follow-up study.

PubMed

Tjepkema, M; Wilkins, R; Long, A

2013-09-01

Mortality data by occupation are not routinely available in Canada, so we analyzed census-linked data to examine cause-specific mortality rates across groups of occupations ranked by skill level. A 15% sample of 1991 Canadian Census respondents aged 25 years or older was previously linked to 16 years of mortality data (1991-2006). The current analysis is based on 2.3 million people aged 25 to 64 years at cohort inception, among whom there were 164 332 deaths during the follow-up period. Occupations coded according to the National Occupation Classification were grouped into five skill levels. Age-standardized mortality rates (ASMRs), rate ratios (RRs), rate differences (RDs) and excess mortality were calculated by occupational skill level for various causes of death. ASMRs were clearly graded by skill level: they were highest among those employed in unskilled jobs (and those without an occupation) and lowest for those in professional occupations. All-cause RRs for men were 1.16, 1.40, 1.63 and 1.83 with decreasing occupational skill level compared with professionals. For women the gradient was less steep: 1.23, 1.24, 1.32 and 1.53. This gradient was present for most causes of death. Rate ratios comparing lowest to highest skill levels were greater than 2 for HIV/AIDS, diabetes mellitus, suicide and cancer of the cervix as well as for causes of death associated with tobacco use and excessive alcohol consumption. Mortality gradients by occupational skill level were evident for most causes of death. These results provide detailed cause-specific baseline indicators not previously available for Canada.

Health Occupations Education. Vocational Education Program Courses Standards.

ERIC Educational Resources Information Center

Florida State Dept. of Education, Tallahassee. Div. of Vocational, Adult, and Community Education.

This document contains vocational education program course standards for health occupations programs in Florida. Standards are provided for a total of 71 exploratory courses, practical arts courses, and job preparatory programs offered at the secondary or postsecondary level. Each program courses standard consists of a curriculum framework and…

Individualizing standardized tests: physiotherapists' and occupational therapists' test practices in a geriatric setting.

PubMed

Krohne, Kariann; Torres, Sandra; Slettebø, Ashild; Bergland, Astrid

2013-09-01

In assessing geriatric patients' functional status, health care professionals use a number of standardized tests. These tests have defined administration procedures that restrict communication and interaction with patients. In this article, we explore the experiences of occupational therapists and physiotherapists acting as standardized test administrators. Drawing on fieldwork, interviews with physiotherapists and occupational therapists, and observations of test situations on acute geriatric wards, we suggest that the test situation generates a tension between what standardization demands and what individualization requires. Our findings illustrate how physiotherapists and occupational therapists navigate between adherence to the test standard and meeting what they consider to be the individual patient's needs in the test situation. We problematize this navigation, and argue that the health care professional's use of relational competence is the means to reach and maintain individualization.

Exact joint density-current probability function for the asymmetric exclusion process.

PubMed

Depken, Martin; Stinchcombe, Robin

2004-07-23

We study the asymmetric simple exclusion process with open boundaries and derive the exact form of the joint probability function for the occupation number and the current through the system. We further consider the thermodynamic limit, showing that the resulting distribution is non-Gaussian and that the density fluctuations have a discontinuity at the continuous phase transition, while the current fluctuations are continuous. The derivations are performed by using the standard operator algebraic approach and by the introduction of new operators satisfying a modified version of the original algebra. Copyright 2004 The American Physical Society

The Affordable Care Act's implications for a public health workforce agenda: taxonomy, enumeration, and the Standard Occupational Classification system.

PubMed

Montes, J Henry; Webb, Susan C

2015-01-01

The Affordable Care Act brings a renewed emphasis on the importance of public health services and those whose occupations are defined by performing the essential public health functions. The Affordable Care Act Prevention and Public Health Fund is a signal to the field that its work is important and critical to the health of the nation. Recent reports by the Institute of Medicine describe the changing dimensions of public health work in primary care integration and the need for enhanced financing of public health as investment. Gaining knowledge about the public health workforce, that is, how many workers there are and what they are doing, is of growing interest and concern for the field. Although enumeration of the public health workforce has been attempted several times by the federal government beginning as early as 1982, it was not until the year 2000 that a major effort was undertaken to obtain more complete information. Limitations that hampered Enumeration 2000 have persisted however. With implementation of the Affordable Care Act and other new ventures, key federal agencies are developing strategies to pursue a systemic and systematic enumeration and consistent taxonomy process. Included in these efforts is use of the Bureau of Labor Statistics, Standard Occupational Classification system. A clear and accurate understanding of the public health workforce and its characteristics is a major challenge. A well-constructed, systematic enumeration process can add to our understanding of the nature and functions of that workforce. In addition, discussion of enumeration must include the need for a consensus within the field that leads to a consistent taxonomy for the public health occupations. This article will provide a stage-setting brief of historical actions regarding enumeration, and it will examine selected enumeration activities taking place currently. It will discuss positive and negative implications facing public health and the potential for enhancing the existing Standard Occupational Classification system to aid enumeration studies.

[Ergonomic risk assessment: aspects applicable in the light of current standards].

PubMed

Baracco, A; Perrelli, F; Romano, C

2010-01-01

The Italian decree law 81/2008 mentions the application of ergonomic principles as a basic tool for the prevention. In this regulation we can not find the definition either of Ergonomics nor of the competences required for its correct application. The Authors consider that occupational physicians have a suitable competence and knowledge on the matter, thanks to their highly specialized training. Actually, the ergonomic doctrine shows up in the daily practice of occupational physicians, who regularly base their activity on the evaluation of the binomial "worker-task": in the management of fitness to work judgements they try to combine operating conditions with worker's psychophysical state, not confining themselves to a simple expression ofa medico-legal certificate. However, the legislative references to specific regulations raise difficulties to occupational physicians in dealing with aspects such as gender, age, reference values and methodological choices. The Authors debate these difficulties in the application of rules.

29 CFR 1910.16 - Longshoring and marine terminals.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS Adoption and Extension of Established Federal Standards § 1910.16 Longshoring and marine terminals. (a) Safety and health standards for longshoring. (1...

29 CFR 1910.16 - Longshoring and marine terminals.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS Adoption and Extension of Established Federal Standards § 1910.16 Longshoring and marine terminals. (a) Safety and health standards for longshoring. (1...

Quantitative PET Imaging in Drug Development: Estimation of Target Occupancy.

PubMed

Naganawa, Mika; Gallezot, Jean-Dominique; Rossano, Samantha; Carson, Richard E

2017-12-11

Positron emission tomography, an imaging tool using radiolabeled tracers in humans and preclinical species, has been widely used in recent years in drug development, particularly in the central nervous system. One important goal of PET in drug development is assessing the occupancy of various molecular targets (e.g., receptors, transporters, enzymes) by exogenous drugs. The current linear mathematical approaches used to determine occupancy using PET imaging experiments are presented. These algorithms use results from multiple regions with different target content in two scans, a baseline (pre-drug) scan and a post-drug scan. New mathematical estimation approaches to determine target occupancy, using maximum likelihood, are presented. A major challenge in these methods is the proper definition of the covariance matrix of the regional binding measures, accounting for different variance of the individual regional measures and their nonzero covariance, factors that have been ignored by conventional methods. The novel methods are compared to standard methods using simulation and real human occupancy data. The simulation data showed the expected reduction in variance and bias using the proper maximum likelihood methods, when the assumptions of the estimation method matched those in simulation. Between-method differences for data from human occupancy studies were less obvious, in part due to small dataset sizes. These maximum likelihood methods form the basis for development of improved PET covariance models, in order to minimize bias and variance in PET occupancy studies.

Barrier-free design: a review and critique of the occupational therapy perspective.

PubMed

Cooper, B A; Cohen, U; Hasselkus, B R

1991-04-01

This review of the occupational therapy literature on barrier-free design identifies both a paucity of related occupational therapy research on the topic and a lack of a common conceptual base with which to guide the development and use of environmental assessments. Nonetheless, two fledgling themes can be extrapolated: the consistent reference to the concepts of accessibility, mobility, function, and safety and an increased awareness among occupational therapists regarding the accessibility standards developed by the American National Standards Institute (ANSI) (ANSI, 1971, 1980). A problem-solving model suggested by designers for the 1979 revision of ANSI standards that incorporates these conceptual themes is described and discussed.

Illinois Occupational Skill Standards: Lodging Cluster.

ERIC Educational Resources Information Center

Illinois Occupational Skill Standards and Credentialing Council, Carbondale.

This document of skill standards for the lodging cluster serves as a guide to workforce preparation program providers in defining content for their programs and to employers to establish the skills and standards necessary for job acquisition. These 28 occupational skill standards describe what people should know and be able to do in an…

A Framework for Defining and Assessing Occupational and Training Standards in Developing Countries. Information Series.

ERIC Educational Resources Information Center

Fretwell, David H.; Lewis, Morgan V.; Deij, Arjen

The key issues, alternatives, and implications for developing countries to consider when designing systems to define occupational standards, related training standards, and assessments were analyzed. The analysis focused on the following issues: the rationale for development of standards; clarification of definitions, terminology, and assumptions;…

Illinois Occupational Skill Standards: Greenhouse/Nursery Cluster.

ERIC Educational Resources Information Center

Illinois Occupational Skill Standards and Credentialing Council, Carbondale.

This document of skill standards for the greenhouse/nursery cluster serves as a guide to workforce preparation program providers in defining content for their programs and to employers to establish the skills and standards necessary for job acquisition. These 23 occupational skill standards describe what people should know and be able to do in an…

Illinois Occupational Skill Standards: Machining Skills Cluster.

ERIC Educational Resources Information Center

Illinois Occupational Skill Standards and Credentialing Council, Carbondale.

This document of skill standards for the machining skills cluster serves as a guide to workforce preparation program providers in defining content for their programs and to employers to establish the skills and standards necessary for job acquisition. These 67 occupational skill standards describe what people should know and be able to do in an…

Illinois Occupational Skill Standards: Landscape Technician Cluster.

ERIC Educational Resources Information Center

Illinois Occupational Skill Standards and Credentialing Council, Carbondale.

This document of skill standards for the landscape technician cluster serves as a guide to workforce preparation program providers in defining content for their programs and to employers to establish the skills and standards necessary for job acquisition. These 19 occupational skill standards describe what people should know and be able to do in…

Job Grading System for Trades and Labor Occupations. Part II.

ERIC Educational Resources Information Center

Civil Service Commission, Washington, DC. Bureau of Policies and Standards.

Three new standards (telephone mechanic, electroplater, and animal caretaker) for grading jobs under the Federal Wage System are cited. There is an alphabetical listing by job for published job grading standards, an occupational code-structure index for published grading standards, and a list of 61 jobs by published job grading standard with…

29 CFR 1910.11 - Scope and purpose.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS Adoption and Extension of Established Federal Standards § 1910.11..., established Federal standards in effect on April 28, 1971, with respect to every employer, employee, and...

29 CFR 1910.11 - Scope and purpose.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS Adoption and Extension of Established Federal Standards § 1910.11... to safety or health are adopted by any incorporations by reference of standards prescribed elsewhere...

29 CFR 1910.11 - Scope and purpose.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS Adoption and Extension of Established Federal Standards § 1910.11... to safety or health are adopted by any incorporations by reference of standards prescribed elsewhere...

29 CFR 1910.135 - Head protection.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS Personal Protective Equipment § 1910.135 Head protection. (a) General...) American National Standards Institute (ANSI) Z89.1-2009, “American National Standard for Industrial Head...

29 CFR 1910.135 - Head protection.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS Personal Protective Equipment § 1910.135 Head protection. (a) General...) American National Standards Institute (ANSI) Z89.1-2009, “American National Standard for Industrial Head...

29 CFR 1913.10 - Rules of agency practice and procedure concerning OSHA access to employee medical records.

Code of Federal Regulations, 2011 CFR

2011-07-01

... (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) RULES OF AGENCY... records treated by 29 CFR 1910.1020(c)(5) or by specific occupational safety and health standards as... requirements of an occupational safety and health standard, or with 29 CFR 1910.1020. An examination of this...

29 CFR 1913.10 - Rules of agency practice and procedure concerning OSHA access to employee medical records.

Code of Federal Regulations, 2010 CFR

2010-07-01

... (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) RULES OF AGENCY... records treated by 29 CFR 1910.1020(c)(5) or by specific occupational safety and health standards as... requirements of an occupational safety and health standard, or with 29 CFR 1910.1020. An examination of this...

[Topics of occupational medicine and environment in codes and social accountability standards of business].

PubMed

Denisov, E I; Golovaneva, G V; Potapenko, A A

2005-01-01

The problems of social accountability as applied to the occupational safety, health and environment are discussed. Russian and international codes and standards in the field are reviewed. Legal duties and rights of employers in occupational risk management for workers' health are considered. Some ethical aspects including health protection of female workers are discussed.

Asbestos: Rationale Behind a Proposed Air Quality Standard

ERIC Educational Resources Information Center

Bruckman, Leonard; Rubino, Robert A.

1975-01-01

This article proposes an asbestos air quality standard for Connecticut lower than proposed Federal regulation. Data are given relating mesothelioma incidence to occupational and non-occupational asbestos exposure. New standards lower asbestos emissions from manufacturing operations thus reducing possible asbestos-related fatalities. Rebuttals and…

Health Occupations Education. Vocational Education Program Courses Standards.

ERIC Educational Resources Information Center

Florida State Dept. of Education, Tallahassee. Div. of Vocational, Adult, and Community Education.

This document contains vocational education program courses standards (curriculum frameworks and student performance standards) for exploratory courses, practical arts courses, and job preparatory programs in health occupations (HO) education offered at the secondary or postsecondary level as a part of Florida's comprehensive vocational education…

Occupancy change detection system and method

DOEpatents

Bruemmer, David J [Idaho Falls, ID; Few, Douglas A [Idaho Falls, ID

2009-09-01

A robot platform includes perceptors, locomotors, and a system controller. The system controller executes instructions for producing an occupancy grid map of an environment around the robot, scanning the environment to generate a current obstacle map relative to a current robot position, and converting the current obstacle map to a current occupancy grid map. The instructions also include processing each grid cell in the occupancy grid map. Within the processing of each grid cell, the instructions include comparing each grid cell in the occupancy grid map to a corresponding grid cell in the current occupancy grid map. For grid cells with a difference, the instructions include defining a change vector for each changed grid cell, wherein the change vector includes a direction from the robot to the changed grid cell and a range from the robot to the changed grid cell.

Work participation of patients with musculoskeletal disorders: is this addressed in physical therapy practice?

PubMed

Oswald, Wiebke; Hutting, Nathan; Engels, Josephine A; Bart Staal, J; Nijhuis-van der Sanden, Maria W G; Heerkens, Yvonne F

2017-01-01

Musculoskeletal disorders are the main complaints for visiting a physical therapist (PT) in primary health care; they have a negative effect on an individual's quality of life and result in a major cost to society. Qualitative research has shown that physical therapists (PTs) treating patients with these disorders experience barriers in the integration of occupational factors within their practice, and also revealed a lack of cooperation between PTs and (other) occupational healthcare providers. The aim of this study is to quantitatively investigate how generalist PTs in the Netherlands, who treat patients with musculoskeletal disorders, currently integrate occupational factors within their practice, and to identify their opinions and needs with regard to enhancing the integration of the patient's work within physical therapy practice. A cross-sectional survey was conducted among generalist PTs who treat working-age (18-67 years) patients with musculoskeletal disorders. Generalist PTs were contacted for participation via digital news-mails and asked to fill out an online survey which was developed based on the results of a recent qualitative study. The survey consisted of: i) demographics of the participants, ii) questions on how generalist PTs currently integrate occupational factors within their practice, and iii) asked their opinion about the integration of occupational factors within physical therapy. The PTs were also asked about their needs with regard to the integration of occupational factors and with regard to cooperation with other (occupational) health professionals. All answers (using Likert scales) are presented as the number and percentage of the respondents reporting those specific answers, whereas all other answers are presented as means and standard deviations. Of the 142 respondents, 64% indicated that occupational factors should be addressed to a greater extent within physical therapy. To have the possibility to bill for a workplace assessment (60.6%) and more knowledge about laws and regulations (50%) were identified as needs of the respondents. Only 14.8% of the respondents indicated that they communicate with or consult a PT specialized in occupational health. Only 12.7% of the participants who do not have a specialized PT within their practice sometimes/regularly refer patients to a specialized PT. Although generalist PTs address occupational factors within their practice, there is room for improvement. This study also identified a lack of cooperation between generalist PTs and PTs specialized in occupational health.

Challenges and perspectives of nanoparticle exposure assessment.

PubMed

Lee, Ji Hyun; Moon, Min Chaul; Lee, Joon Yeob; Yu, Il Je

2010-06-01

Nanoparticle exposure assessment presents a unique challenge in the field of occupational and environmental health. With the commercialization of nanotechnology, exposure usually starts from the workplace and then spreads to environment and consumer exposure. This report discusses the current trends of nanoparticle exposure assessment, including the definition of nanotechnology relevant terms, essential physicochemical properties for nanomaterial characterization, current international activities related nanomaterial safety, and exposure assessment standard development for nanotechnology. Further this report describes challenges of nanoparticle exposure assessment such as background measurement, metrics of nanoparticle exposure assessment and personal sampling.

Federal Farmworker Housing Standards and Regulations, Their Promise and Limitations, and Implications for Farmworker Health.

PubMed

Moss Joyner, Ann; George, Lance; Hall, Mary Lee; Jacobs, Ilene J; Kissam, E D; Latin, Shelley; Parnell, Allan; Ruiz, Virginia; Shadbeh, Nargess; Tobacman, Janet

2015-11-01

The housing available to most farmworkers is substandard and unacceptable in 21st-century America. The federal government established minimal occupational safety and health standards applicable to migrant farmworker labor camps decades ago, and some states have statutory schemes and regulations that set standards for farm labor camps and employee housing. Many of these federal and state regulations no longer reflect current employment and housing trends, and enforcement success varies greatly. These regulations implicitly recognize the connection between housing conditions and health, but do not effectively address that connection. This review describes the current state of farmworker housing, discusses laws and regulations pertaining to such housing, and highlights the literature on health risks associated with inadequate housing. We propose specific recommendations to strengthen enforcement and reduce the risks of substandard housing for the health of farmworkers and their families. © The Author(s) 2015.

Contemporary Occupational Carcinogen Exposure and Bladder Cancer: A Systematic Review and Meta-analysis.

PubMed

Cumberbatch, Marcus G K; Cox, Angela; Teare, Dawn; Catto, James W F

2015-12-01

Bladder cancer (BC) is a common disease. Despite manufacturing and legislative changes to workplace hygiene, many BCs still arise through occupational carcinogen exposure. To profile contemporary risks of occupational BC. A systematic review using PubMed, Medline, Embase, and Web of Science was performed in October 2012 (initial review) and May 2014 (final review) and was updated in June 2015. We identified 263 eligible articles. We excluded reports in which BC or occupation were not the main focus, and those with insufficient case, risk, or confidence interval data. We selected the most recent data from populations with multiple reports. Reports were selected by 2 of us independently. We combined odds ratios and risk ratios (RRs) to provide pooled RRs, using maximally adjusted RRs in a random effects model. Heterogeneity and publication bias were assessed using I2 and Begg and Egger tests. Risk estimates were annotated by occupational class using Nordisk Yrkesklassificering, or Nordic Occupational Classification, and International Standard Classifications of Occupations (NYK and ISCO-1958) Codes. Occupations were profiled by BC incidence and mortality risk over time. After data collection, we detected a sex difference in these profiles and recorded this as a secondary outcome. Meta-analysis revealed increased BC incidence in 42 of 61 occupational classes and increased BC-specific mortality in 16 of 40 occupational classes. Reduced incidence and mortality were seen in 6 of 61 and 2 of 40 classes, respectively. Risk varied with sex and was greatest in men (standardized incidence ratio, 1.03 [95% CI, 1.02-1.03]; P < .001]). From the 1960s to the 1980s, there was a steady decline in standarized incidence ratio (SIR) for both sexes. This trend reversed from the 1980s, as in the decade 2000 to 2010 the SIR increased to 1.13 (95% CI, 1.07-1.19) for men and 1.27 (95% CI, 1.12-1.43) for women. In contrast, mortality risk declined for both sexes from the 1960s to the 1990s. The overall risk of BC mortality was also greater for men (standardized mortality ratio [SMR], 1.32 [95% CI, 1.18-1.48]) than for women (SMR, 1.14 [95% CI, 0.80-1.63]). Limitations include possible publication bias, that reports stratify workers mostly by job title not task, that not all studies adjusted for smoking, and that the population was mostly derived from Western nations. The profile of contemporary occupations with increased BC risk is broad and differs for incidence and mortality. Currently the incidence seems to be increasing, and this increase is occurring faster in women than men. Improved detection mechanisms and screening are possible reasons for this. Workers with aromatic amine exposure have the highest incidence, while those exposed to polycyclic aromatic hydrocarbons and heavy metals have the greatest mortality.

Effects of the Occupational Safety and Health Administration's control of hazardous energy (lockout/tagout) standard on rates of machinery-related fatal occupational injury.

PubMed

Bulzacchelli, Maria T; Vernick, Jon S; Webster, Daniel W; Lees, Peter S J

2007-10-01

To evaluate the impact of the United States' federal Occupational Safety and Health Administration's control of hazardous energy (lockout/tagout) standard on rates of machinery-related fatal occupational injury. The standard, which took effect in 1990, requires employers in certain industries to establish an energy control program and sets minimum criteria for energy control procedures, training, inspections, and hardware. An interrupted time-series design was used to determine the standard's effect on fatality rates. Machinery-related fatalities, obtained from the National Traumatic Occupational Fatalities surveillance system for 1980 through 2001, were used as a proxy for lockout/tagout-related fatalities. Linear regression was used to control for changes in demographic and economic factors. The average annual crude rate of machinery-related fatalities in manufacturing changed little from 1980 to 1989, but declined by 4.59% per year from 1990 to 2001. However, when controlling for demographic and economic factors, the regression model estimate of the standard's effect is a small, non-significant increase of 0.05 deaths per 100 000 production worker full-time equivalents (95% CI -0.14 to 0.25). When fatality rates in comparison groups that should not have been affected by the standard are incorporated into the analysis, there is still no significant change in the rate of machinery-related fatalities in manufacturing. There is no evidence that the lockout/tagout standard decreased fatality rates relative to other trends in occupational safety over the study period. A possible explanation is voluntary use of lockout/tagout by some employers before introduction of the standard and low compliance by other employers after.

Effects of the Occupational Safety and Health Administration's control of hazardous energy (lockout/tagout) standard on rates of machinery‐related fatal occupational injury

PubMed Central

Bulzacchelli, Maria T; Vernick, Jon S; Webster, Daniel W; Lees, Peter S J

2007-01-01

Objective To evaluate the impact of the United States' federal Occupational Safety and Health Administration's control of hazardous energy (lockout/tagout) standard on rates of machinery‐related fatal occupational injury. The standard, which took effect in 1990, requires employers in certain industries to establish an energy control program and sets minimum criteria for energy control procedures, training, inspections, and hardware. Design An interrupted time‐series design was used to determine the standard's effect on fatality rates. Machinery‐related fatalities, obtained from the National Traumatic Occupational Fatalities surveillance system for 1980 through 2001, were used as a proxy for lockout/tagout‐related fatalities. Linear regression was used to control for changes in demographic and economic factors. Results The average annual crude rate of machinery‐related fatalities in manufacturing changed little from 1980 to 1989, but declined by 4.59% per year from 1990 to 2001. However, when controlling for demographic and economic factors, the regression model estimate of the standard's effect is a small, non‐significant increase of 0.05 deaths per 100 000 production worker full‐time equivalents (95% CI −0.14 to 0.25). When fatality rates in comparison groups that should not have been affected by the standard are incorporated into the analysis, there is still no significant change in the rate of machinery‐related fatalities in manufacturing. Conclusions There is no evidence that the lockout/tagout standard decreased fatality rates relative to other trends in occupational safety over the study period. A possible explanation is voluntary use of lockout/tagout by some employers before introduction of the standard and low compliance by other employers after. PMID:17916891

[Detection of occupational hazards in a large shipbuilding factory].

PubMed

Du, Weijia; Wang, Zhi; Zhang, Hai; Zhou, Liping; Huang, Minzhi; Liu, Yimin

2014-03-01

To provide evidence for the prevention and treatment of occupational diseases by the analysis of existing major occupational hazards and health conditions of workers in a large shipbuilding factory. Field investigation of occupational conditions was conducted to examine the existence of occupational hazards from 2009 to 2012 in a large shipbuilding factory, and then the results of physical examination among its workers were analyzed. Other than the metal dust (total dust), the levels of other dusts and manganese dioxide were beyond the national standard to various degrees, and through a sampling point detection, it was found that the levels of manganese dioxide exceeded the standard by 42.8%. The maximum time-weighted average concentration in individuals was 27.927 mg/m(3), much higher than the national standard limit. For harmful gas detection in individuals, xylene was 38.4%above the standard level (the highest concentration reached 1447.7 mg/m(3)); moreover, both toluene and ethylbenzene exceeded the national standard at different levels. Among the noise-exposed workers, 71%worked in the environment where the daily noise was above the limit of the national standard (85 dB). Physical examinations in 2010 and 2012 showed that the abnormal rate of audiometry in workers was higher than 15%. Dust (total dust), manganese dioxide, benzene, and noise are the main occupational hazards among the workers in the large shipbuilding factory, and strict protection and control for these hazards should be implemented for the workers in the factory.

29 CFR 1928.21 - Applicable standards in 29 CFR part 1910.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 29 Labor 9 2013-07-01 2013-07-01 false Applicable standards in 29 CFR part 1910. 1928.21 Section 1928.21 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) OCCUPATIONAL SAFETY AND HEALTH STANDARDS FOR AGRICULTURE Applicability of...

29 CFR 1904.9 - Recording criteria for cases involving medical removal under OSHA standards.

Code of Federal Regulations, 2011 CFR

2011-07-01

... under OSHA standards. 1904.9 Section 1904.9 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR RECORDING AND REPORTING OCCUPATIONAL INJURIES AND... removal under OSHA standards. (a) Basic requirement. If an employee is medically removed under the medical...

29 CFR 1904.9 - Recording criteria for cases involving medical removal under OSHA standards.

Code of Federal Regulations, 2010 CFR

2010-07-01

... under OSHA standards. 1904.9 Section 1904.9 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR RECORDING AND REPORTING OCCUPATIONAL INJURIES AND... removal under OSHA standards. (a) Basic requirement. If an employee is medically removed under the medical...

10 CFR 835.207 - Occupational dose limits for minors.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 4 2010-01-01 2010-01-01 false Occupational dose limits for minors. 835.207 Section 835.207 Energy DEPARTMENT OF ENERGY OCCUPATIONAL RADIATION PROTECTION Standards for Internal and External Exposure § 835.207 Occupational dose limits for minors. The dose limits for minors occupationally exposed...

10 CFR 20.1207 - Occupational dose limits for minors.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 1 2012-01-01 2012-01-01 false Occupational dose limits for minors. 20.1207 Section 20.1207 Energy NUCLEAR REGULATORY COMMISSION STANDARDS FOR PROTECTION AGAINST RADIATION Occupational Dose Limits § 20.1207 Occupational dose limits for minors. The annual occupational dose limits for minors are...

10 CFR 20.1207 - Occupational dose limits for minors.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 1 2011-01-01 2011-01-01 false Occupational dose limits for minors. 20.1207 Section 20.1207 Energy NUCLEAR REGULATORY COMMISSION STANDARDS FOR PROTECTION AGAINST RADIATION Occupational Dose Limits § 20.1207 Occupational dose limits for minors. The annual occupational dose limits for minors are...

10 CFR 20.1207 - Occupational dose limits for minors.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 1 2010-01-01 2010-01-01 false Occupational dose limits for minors. 20.1207 Section 20.1207 Energy NUCLEAR REGULATORY COMMISSION STANDARDS FOR PROTECTION AGAINST RADIATION Occupational Dose Limits § 20.1207 Occupational dose limits for minors. The annual occupational dose limits for minors are...

10 CFR 20.1207 - Occupational dose limits for minors.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 1 2013-01-01 2013-01-01 false Occupational dose limits for minors. 20.1207 Section 20.1207 Energy NUCLEAR REGULATORY COMMISSION STANDARDS FOR PROTECTION AGAINST RADIATION Occupational Dose Limits § 20.1207 Occupational dose limits for minors. The annual occupational dose limits for minors are...

10 CFR 20.1207 - Occupational dose limits for minors.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 1 2014-01-01 2014-01-01 false Occupational dose limits for minors. 20.1207 Section 20.1207 Energy NUCLEAR REGULATORY COMMISSION STANDARDS FOR PROTECTION AGAINST RADIATION Occupational Dose Limits § 20.1207 Occupational dose limits for minors. The annual occupational dose limits for minors are...

A Career Story Approach to Management, Business, and Financial Occupations

ERIC Educational Resources Information Center

Brott, Pamelia E.

2012-01-01

Business, management, and financial occupations are found in organizations in which individuals direct activities and perform tasks related to business and finance. The career cluster includes 144 occupational titles across 57% of the 23 major Standard Occupational Classification groups, with almost half of the occupations considered "bright…

NIOSH testimony to DOL on the Occupational Safety And Health Administration's proposed rule on occupational exposure to asbestos, tremolite, anthophyllite, and actinolite by J. D. Millar, January 24, 1991

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1991-01-24

The testimony contains the comments of NIOSH regarding the proposed rule on occupational exposure to asbestos (1332214), tremolite (14567738), anthophyllite (17068789) and actinolite (77536664) exposures. NIOSH supports OSHA in proposing changes to the existing asbestos standard to minimize the risk of asbestos related diseases in workers. The current standard is insufficient to protect the health of workers exposed to asbestos, and the proposed changes represent a prudent and necessary approach to accomplish this goal. Specific topics addressed in the testimony include exposure limits for asbestos; methods for sampling and analysis of airborne fibers; use of time weighted averages to measuremore » exposure; use of engineering controls, good work practices and personal protective equipment; use of engineering controls and work practices for brake and clutch repair and service; required use of specific work practices during maintenance of vinyl asbestos floor tile; housekeeping; definitions of small scale and short duration operations; exemption of roofing operations from the requirement for negative pressure enclosures; communication among employers and owners; regulated areas for asbestos removal, maintenance, demolition, and renovation operations; use of glove bags; definition of competent person; and notification to OSHA and method of notification.« less

Interpreting MSHA citations through the lens of occupational health and safety management systems: investigating their impact on mine injuries and illnesses 2003-2010.

PubMed

Yorio, Patrick L; Willmer, Dana R; Haight, Joel M

2014-08-01

Since the late 1980s, the U.S. Department of Labor has considered regulating a systems approach to occupational health and safety management. Recently, a health and safety management systems (HSMS) standard has returned to the regulatory agenda of both the Occupational Safety and Health Administration (OSHA) and the Mine Safety and Health Administration (MSHA). Because a mandated standard has implications for both industry and regulating bodies alike, it is imperative to gain a greater understanding of the potential effects that an HSMS regulatory approach can have on establishment-level injuries and illnesses. Through the lens of MSHA's regulatory framework, we first explore how current enforcement activities align with HSMS elements. Using MSHA data for the years 2003-2010, we then analyze the relationship between various types of enforcement activities (e.g., total number of citations, total penalty amount, and HSMS-aligned citations) and mine reportable injuries. Our findings show that the reduction in mine reportable injuries predicted by increases in MSHA enforcement ranges from negligible to 18%. The results suggest that the type and focus of the enforcement activity may be more important for accident reduction than the total number of citations issued and the associated penalty amount. © 2014 Society for Risk Analysis.

An analysis of collegiate band directors' exposure to sound pressure levels

NASA Astrophysics Data System (ADS)

Roebuck, Nikole Moore

Noise-induced hearing loss (NIHL) is a significant but unfortunate common occupational hazard. The purpose of the current study was to measure the magnitude of sound pressure levels generated within a collegiate band room and determine if those sound pressure levels are of a magnitude that exceeds the policy standards and recommendations of the Occupational Safety and Health Administration (OSHA), and the National Institute of Occupational Safety and Health (NIOSH). In addition, reverberation times were measured and analyzed in order to determine the appropriateness of acoustical conditions for the band rehearsal environment. Sound pressure measurements were taken from the rehearsal of seven collegiate marching bands. Single sample t test were conducted to compare the sound pressure levels of all bands to the noise exposure standards of OSHA and NIOSH. Multiple regression analysis were conducted and analyzed in order to determine the effect of the band room's conditions on the sound pressure levels and reverberation times. Time weighted averages (TWA), noise percentage doses, and peak levels were also collected. The mean Leq for all band directors was 90.5 dBA. The total accumulated noise percentage dose for all band directors was 77.6% of the maximum allowable daily noise dose under the OSHA standard. The total calculated TWA for all band directors was 88.2% of the maximum allowable daily noise dose under the OSHA standard. The total accumulated noise percentage dose for all band directors was 152.1% of the maximum allowable daily noise dose under the NIOSH standards, and the total calculated TWA for all band directors was 93dBA of the maximum allowable daily noise dose under the NIOSH standard. Multiple regression analysis revealed that the room volume, the level of acoustical treatment and the mean room reverberation time predicted 80% of the variance in sound pressure levels in this study.

Survey of current lead use, handling, hygiene, and contaminant controls among New Jersey industries.

PubMed

Blando, James D; Lefkowitz, Daniel K; Valiante, David; Gerwel, Barbara; Bresnitz, Eddy

2007-08-01

In 2003, a chemical handling and use survey was mailed to New Jersey employers identified as currently using lead in their industrial processes. This survey was used to ascertain characteristics about lead use, handling, and protection of employees during manufacturing operations. The survey included a diverse group of current lead users with a total lead use range from less than 1 pound to more than 63 million pounds of lead per year. The survey allowed for a comprehensive characterization of hazards and protective measures associated with this metal, still commonly used in many products and industrial processes. Forty-five surveys were returned by companies that are listed in the New Jersey Adult Blood Lead Registry, which is part of the New Jersey Adult Blood Lead Epidemiology and Surveillance (ABLES) program. This program records and investigates cases of adults with greater than 25 mu g/dL of lead in their blood; most cases are related to occupational exposures. This survey found that greater than 25% of these surveyed companies with significant potential for lead exposure did not employ commonly used and basic industrial hygiene practices. In addition, the survey found that 24% of these companies had not conducted air sampling within the last 3 years. Air sampling is the primary trigger for compliance with the Occupational Safety and Health Administration (OSHA) general industry lead standard. Only 17% of the companies have ever been cited for a violation of the OSHA lead standard, and only 46% of these companies have ever had an OSHA inspection. State-based surveillance can be a useful tool for OSHA enforcement activities. Elevated blood lead values in adults should be considered as a trigger for required compliance with an OSHA general industry lead standard.

Occupant Injury Severity and Accident Causes in Helicopter Emergency Medical Services (1983-2014).

PubMed

Boyd, Douglas D; Macchiarella, Nickolas D

2016-01-01

Helicopter emergency medical services (HEMS) transport critically ill patients to/between emergency care facilities and operate in a hazardous environment: the destination site is often encumbered with obstacles, difficult to visualize at night, and lack instrument approaches for degraded visibility. The study objectives were to determine 1) HEMS accident rates and causes; 2) occupant injury severity profiles; and 3) whether accident aircraft were certified to the more stringent crashworthiness standards implemented two decades ago. The National Transportation Safety Board (NTSB) aviation accident database was used to identify HEMS mishaps for the years spanning 1983-2014. Contingency tables (Pearson Chi-square or Fisher's exact test) were used to determine differences in proportions. A generalized linear model (Poisson distribution) was used to determine if accident rates differed over time. While the HEMS accident rate decreased by 71% across the study period, the fraction of fatal accidents (36-50%) and the injury severity profiles were unchanged. None of the accident aircraft fully satisfied the current crashworthiness standards. Failure to clear obstacles and visual-to-instrument flight, the most frequent accident causes (37 and 26%, respectively), showed a downward trend, whereas accidents ascribed to aircraft malfunction showed an upward trend over time. HEMS operators should consider updating their fleet to the current, more stringent crashworthiness standards in an attempt to reduce injury severity. Additionally, toward further mitigating accidents ascribed to inadvertent visual-to-instrument conditions, HEMS aircraft should be avionics-equipped for instrument flight rules flight.

Apollo 11 impact on the occupational medicine program, NASA Manned Spacecraft Center

NASA Technical Reports Server (NTRS)

Wright, P. E.

1969-01-01

Requirements and development of standards for occupational medicine support of personnel in the Lunar Receiving Laboratory (LRL) are outlined. Considered are proper personnel performance and exclusion of people prone to develop a serious illness within the quarantine area. Occupational medicine report for the LRL consists of examination procedures covering laboratory work, periodic examinations, immunizations, health maintenance, preventive practices, medical standards, and waiver authority.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stayner, L.T.; Meinhardt, T.; Hardin, B.

Under the Occupational Safety and Health, and Mine Safety and Health Acts, the National Institute for Occupational Safety and Health (NIOSH) is charged with development of recommended occupational safety and health standards, and with conducting research to support the development of these standards. Thus, NIOSH has been actively involved in the analysis of risk associated with occupational exposures, and in the development of research information that is critical for the risk assessment process. NIOSH research programs and other information resources relevant to the risk assessment process are described in this paper. Future needs for information resources are also discussed.

75 FR 68814 - Notice of Submission of Proposed Information Collection to OMB Minimum Property Standards for...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-09

... Proposed Information Collection to OMB Minimum Property Standards for Multifamily and Care-Type Occupancy... Lists the Following Information Title of Proposal: Minimum Property Standards for Multifamily and Care-Type Occupancy Housing. OMB Approval Number: 2502-0321. Form Numbers: None. Description of the Need for...

The Development of National Occupational Standards for Intercultural Working in the UK

ERIC Educational Resources Information Center

MacDonald, Malcolm N.; O'Regan, John P.; Witana, Julie

2009-01-01

From 2007 to 2008, CILT (Centre for Information for Language Teachers) developed a set of National Occupational Standards for Intercultural Working in the UK. This paper reports on three questions arising from the development project: how these standards are distinctive from others, how they realise intercultural competence and how they meet…

75 FR 6123 - Federal Motor Vehicle Safety Standards; Occupant Crash Protection

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-08

... motor vehicle safety standard is in effect under this chapter, a State or a political subdivision of a... [Docket No. NHTSA-2009-0156] RIN 2127-AK57 Federal Motor Vehicle Safety Standards; Occupant Crash...'s response to petitions for reconsideration of a November 12, 2008 final rule that amended the child...

Professional versus Occupational Models of Work Competence

ERIC Educational Resources Information Center

Lester, Stan

2014-01-01

In addition to the familiar occupational standards that underpin National Vocational Qualifications, the UK has a parallel if less complete system of competence or practice standards that are developed and controlled by professional bodies. While there is a certain amount of overlap between the two types of standard, recent research points to a…

29 CFR 1910.3 - Petitions for the issuance, amendment, or repeal of a standard.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 5 2011-07-01 2011-07-01 false Petitions for the issuance, amendment, or repeal of a standard. 1910.3 Section 1910.3 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS General § 1910.3...

29 CFR 1910.3 - Petitions for the issuance, amendment, or repeal of a standard.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 29 Labor 5 2012-07-01 2012-07-01 false Petitions for the issuance, amendment, or repeal of a standard. 1910.3 Section 1910.3 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS General § 1910.3...

29 CFR 1910.309-1910.330 - [Reserved

Code of Federal Regulations, 2011 CFR

2011-07-01

... Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS Electrical Design Safety Standards for Electrical Systems §§ 1910.309-1910.330 [Reserved] Safety-Related Work Practices ...

29 CFR 1910.309-1910.330 - [Reserved

Code of Federal Regulations, 2012 CFR

2012-07-01

... Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS Electrical Design Safety Standards for Electrical Systems §§ 1910.309-1910.330 [Reserved] Safety-Related Work Practices ...

The future excess fraction of occupational cancer among those exposed to carcinogens at work in Australia in 2012.

PubMed

Carey, Renee N; Hutchings, Sally J; Rushton, Lesley; Driscoll, Timothy R; Reid, Alison; Glass, Deborah C; Darcey, Ellie; Si, Si; Peters, Susan; Benke, Geza; Fritschi, Lin

2017-04-01

Studies in other countries have generally found approximately 4% of current cancers to be attributable to past occupational exposures. This study aimed to estimate the future burden of cancer resulting from current occupational exposures in Australia. The future excess fraction method was used to estimate the future burden of occupational cancer (2012-2094) among the proportion of the Australian working population who were exposed to occupational carcinogens in 2012. Calculations were conducted for 19 cancer types and 53 cancer-exposure pairings, assuming historical trends and current patterns continued to 2094. The cohort of 14.6 million Australians of working age in 2012 will develop an estimated 4.8 million cancers during their lifetime, of which 68,500 (1.4%) are attributable to occupational exposure in those exposed in 2012. The majority of these will be lung cancers (n=26,000), leukaemias (n=8000), and malignant mesotheliomas (n=7500). A significant proportion of future cancers will result from occupational exposures. This estimate is lower than previous estimates in the literature; however, our estimate is not directly comparable to past estimates of the occupational cancer burden because they describe different quantities - future cancers in currently exposed versus current cancers due to past exposures. The results of this study allow us to determine which current occupational exposures are most important, and where to target exposure prevention. Copyright © 2016 Elsevier Ltd. All rights reserved.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mendell, Mark J.; Fisk, William J.

Background - The goal of this project, with a focus on commercial buildings in California, was to develop a new framework for evidence-based minimum ventilation rate (MVR) standards that protect occupants in buildings while also considering energy use and cost. This was motivated by research findings suggesting that current prescriptive MVRs in commercial buildings do not provide occupants with fully safe and satisfactory indoor environments. Methods - The project began with a broad review in several areas ? the diverse strategies now used for standards or guidelines for MVRs or for environmental contaminant exposures, current knowledge about adverse human effectsmore » associated with VRs, and current knowledge about contaminants in commercial buildings, including their their presence, their adverse human effects, and their relationships with VRs. Based on a synthesis of the reviewed information, new principles and approaches are proposed for setting evidence-based VRs standards for commercial buildings, considering a range of human effects including health, performance, and acceptability of air. Results ? A review and evaluation is first presented of current approaches to setting prescriptive building ventilation standards and setting acceptable limits for human contaminant exposures in outdoor air and occupational settings. Recent research on approaches to setting acceptable levels of environmental exposures in evidence-based MVR standards is also described. From a synthesis and critique of these materials, a set of principles for setting MVRs is presented, along with an example approach based on these principles. The approach combines two sequential strategies. In a first step, an acceptable threshold is set for each adverse outcome that has a demonstrated relationship to VRs, as an increase from a (low) outcome level at a high reference ventilation rate (RVR, the VR needed to attain the best achievable levels of the adverse outcome); MVRs required to meet each specific outcome threshold are estimated; and the highest of these MVRs, which would then meet all outcome thresholds, is selected as the target MVR. In a second step, implemented only if the target MVR from step 1 is judged impractically high, costs and benefits are estimated and this information is used in a risk management process. Four human outcomes with substantial quantitative evidence of relationships to VRs are identified for initial consideration in setting MVR standards. These are: building-related symptoms (sometimes called sick building syndrome symptoms), poor perceived indoor air quality, and diminished work performance, all with data relating them directly to VRs; and cancer and non-cancer chronic outcomes, related indirectly to VRs through specific VR-influenced indoor contaminants. In an application of step 1 for offices using a set of example outcome thresholds, a target MVR of 9 L/s (19 cfm) per person was needed. Because this target MVR was close to MVRs in current standards, use of a cost/benefit process seemed unnecessary. Selection of more stringent thresholds for one or more human outcomes, however, could raise the target MVR to 14 L/s (30 cfm) per person or higher, triggering the step 2 risk management process. Consideration of outdoor air pollutant effects would add further complexity to the framework. For balancing the objective and subjective factors involved in setting MVRs in a cost-benefit process, it is suggested that a diverse group of stakeholders make the determination after assembling as much quantitative data as possible.« less

The Lifetime Surveillance of Astronaut Health (LSAH) Project

NASA Technical Reports Server (NTRS)

Bopp, Eugenia; Wear, Mary L.; Lee, Lesley R.; VanBaalen, Mary

2013-01-01

From 1989-2010 NASA conducted a research study, the Longitudinal Study of Astronaut Health, to investigate the incidence of acute and chronic morbidity and mortality in astronauts and to determine whether their occupational exposures were associated with increased risk of death or disability. In 2004, the Institute of Medicine recommended that NASA convert the longitudinal study into an occupational health surveillance program and in 2010, NASA initiated the Lifetime Surveillance of Astronaut Health project. The new program collects data on astronaut workplace exposures, especially those occurring in the training and space flight environments, and conducts operational and health care analyses to look for trends in exposure and health outcomes. Astronaut selection and retention medical standards are rigorous, requiring an extensive clinical testing regimen. As a result, this employee population has contributed to a large set of health data available for analyses. Astronauts represent a special population with occupational exposures not typically experienced by other employee populations. Additionally, astronauts are different from the general population in terms of demographic and physiologic characteristics. The challenges and benefits of conducting health surveillance for an employee population with unique occupational exposures will be discussed. Several occupational surveillance projects currently underway to examine associations between astronaut workplace exposures and medical outcomes will be described.

Deriving exposure limits

NASA Astrophysics Data System (ADS)

Sliney, David H.

1990-07-01

Historically many different agencies and standards organizations have proposed laser occupational exposure limits (EL1s) or maximum permissible exposure (MPE) levels. Although some safety standards have been limited in scope to manufacturer system safety performance standards or to codes of practice most have included occupational EL''s. Initially in the 1960''s attention was drawn to setting EL''s however as greater experience accumulated in the use of lasers and some accident experience had been gained safety procedures were developed. It became clear by 1971 after the first decade of laser use that detailed hazard evaluation of each laser environment was too complex for most users and a scheme of hazard classification evolved. Today most countries follow a scheme of four major hazard classifications as defined in Document WS 825 of the International Electrotechnical Commission (IEC). The classifications and the associated accessible emission limits (AEL''s) were based upon the EL''s. The EL and AEL values today are in surprisingly good agreement worldwide. There exists a greater range of safety requirements for the user for each class of laser. The current MPE''s (i. e. EL''s) and their basis are highlighted in this presentation. 2. 0

Development of the Final Version of the Classification and Assessment of Occupational Dysfunction Scale

PubMed Central

Teraoka, Mutsumi; Kyougoku, Makoto

2015-01-01

Occupational therapy is involved in disability prevention and health enhancement through the prevention of occupational dysfunction. Although many occupational dysfunction scales exist, no standard method is available for the assessment and classification of occupational dysfunction, which may include occupational imbalance, occupational deprivation, occupational alienation, and occupational marginalization. The purpose of this study was to develop the final version of Classification and Assessment of Occupational Dysfunction (CAOD). Our study demonstrated the validity and reliability of CAOD in a group of undergraduate students. The CAOD scale includes 16 items and addresses the following 4 domains: occupational imbalance, occupational deprivation, occupational alienation, and occupational marginalization. PMID:26263375

Tuberculosis in a South African prison – a transmission modelling analysis

PubMed Central

Johnstone-Robertson, Simon; Lawn, Stephen D; Welte, Alex; Bekker, Linda-Gail; Wood, Robin

2015-01-01

Background Prisons are recognised internationally as institutions with very high tuberculosis (TB) burdens where transmission is predominantly determined by contact between infectious and susceptible prisoners. A recent South African court case described the conditions under which prisoners awaiting trial were kept. With the use of these data, a mathematical model was developed to explore the interactions between incarceration conditions and TB control measures. Methods Cell dimensions, cell occupancy, lock-up time, TB incidence and treatment delays were derived from court evidence and judicial reports. Using the Wells-Riley equation and probability analyses of contact between prisoners, we estimated the current TB transmission probability within prison cells, and estimated transmission probabilities of improved levels of case finding in combination with implementation of national and international minimum standards for incarceration. Results Levels of overcrowding (230%) in communal cells and poor TB case finding result in annual TB transmission risks of 90% per annum. Implementing current national or international cell occupancy recommendations would reduce TB transmission probabilities by 30% and 50%, respectively. Improved passive case finding, modest ventilation increase or decreased lock-up time would minimally impact on transmission if introduced individually. However, active case finding together with implementation of minimum national and international standards of incarceration could reduce transmission by 50% and 94%, respectively. Conclusions Current conditions of detention for awaiting-trial prisoners are highly conducive for spread of drug-sensitive and drug-resistant TB. Combinations of simple well-established scientific control measures should be implemented urgently. PMID:22272961

Fault tree analysis for exposure to refrigerants used for automotive air conditioning in the United States.

PubMed

Jetter, J J; Forte, R; Rubenstein, R

2001-02-01

A fault tree analysis was used to estimate the number of refrigerant exposures of automotive service technicians and vehicle occupants in the United States. Exposures of service technicians can occur when service equipment or automotive air-conditioning systems leak during servicing. The number of refrigerant exposures of service technicians was estimated to be 135,000 per year. Exposures of vehicle occupants can occur when refrigerant enters passenger compartments due to sudden leaks in air-conditioning systems, leaks following servicing, or leaks caused by collisions. The total number of exposures of vehicle occupants was estimated to be 3,600 per year. The largest number of exposures of vehicle occupants was estimated for leaks caused by collisions, and the second largest number of exposures was estimated for leaks following servicing. Estimates used in the fault tree analysis were based on a survey of automotive air-conditioning service shops, the best available data from the literature, and the engineering judgement of the authors and expert reviewers from the Society of Automotive Engineers Interior Climate Control Standards Committee. Exposure concentrations and durations were estimated and compared with toxicity data for refrigerants currently used in automotive air conditioners. Uncertainty was high for the estimated numbers of exposures, exposure concentrations, and exposure durations. Uncertainty could be reduced in the future by conducting more extensive surveys, measurements of refrigerant concentrations, and exposure monitoring. Nevertheless, the analysis indicated that the risk of exposure of service technicians and vehicle occupants is significant, and it is recommended that no refrigerant that is substantially more toxic than currently available substitutes be accepted for use in vehicle air-conditioning systems, absent a means of mitigating exposure.

The Makings of a Technician.

ERIC Educational Resources Information Center

Baird, Collette

1996-01-01

Describes the development of occupational standards for technicians in education and highlights the main aspects of the work. Explains the importance of learning as much as possible about technicians' work so that emerging occupational standards are both accurate and enabling. (DDR)

29 CFR 1915.155 - Head protection.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) OCCUPATIONAL SAFETY AND HEALTH STANDARDS FOR SHIPYARD EMPLOYMENT Personal Protective Equipment...-2003, “American National Standard for Industrial Head Protection,” which is incorporated by reference...

Associations of smoking status with other lifestyle behaviors are modified by sex and occupational category among urban civil servants in Japan.

PubMed

Higashibata, Takahiro; Wakai, Kenji; Okada, Rieko; Nakagawa, Hiroko; Hamajima, Nobuyuki

2016-11-01

The aim of the present study was to examine the associations of current smoking with five other unhealthy lifestyle behaviors among urban civil servants in Japan according to sex and occupational category. The study included 10,232 urban civil servants in Japan who presented for a health check-up in 2011. We analyzed data on anthropometric measurements and self-reported lifestyle factors. Current smokers had a higher BMI than never smokers in white-collar workers, but not in blue-collar workers of both sexes. There were strong associations of current smoking with irregular breakfasting regardless of sex and occupational category. In males, current smokers were less likely to take exercise than ex-smokers in both occupational categories. The associations of current smoking with other unhealthy behaviors were modified by sex and occupational category. These results are useful for understanding the health risks among smokers according to sex and occupational category.

Health Occupations. Missouri's Show-Me Standards and Vocational Education Competencies Cross Reference. Main Report [and] Mini Report.

ERIC Educational Resources Information Center

Tieman, Rebecca; Burns, Stacey

This publication consists of the main and mini reports for Missouri's Show-Me Standards and vocational education competencies for health occupations. This database documents the common ground between academic skills and vocational competencies. Both components of the Show-Me Standards--knowledge (content) and performance (process)--have been…

29 CFR 500.132 - Applicable Federal standards: ETA and OSHA housing standards.

Code of Federal Regulations, 2010 CFR

2010-07-01

... promulgated by the Occupational Safety and Health Administration, at 29 CFR 1910.142. Except as provided in... Migrant Workers Housing Safety and Health § 500.132 Applicable Federal standards: ETA and OSHA housing... Occupational Safety and Health Act. (2) A person who owns or controls a facility or real property to be used...

29 CFR 500.132 - Applicable Federal standards: ETA and OSHA housing standards.

Code of Federal Regulations, 2011 CFR

2011-07-01

... promulgated by the Occupational Safety and Health Administration, at 29 CFR 1910.142. Except as provided in... Migrant Workers Housing Safety and Health § 500.132 Applicable Federal standards: ETA and OSHA housing... Occupational Safety and Health Act. (2) A person who owns or controls a facility or real property to be used...

Free trade and occupational health policy: an argument for health and safety across the North American workplace.

PubMed

McGuinness, M J

1994-01-01

This article considers the argument that the North American Free Trade Agreement (NAFTA) would encourage US and Canadian industry to relocate their hazardous manufacturing operations to Mexico. Proponents of this view believe that this industrial flight south would worsen working conditions in Mexico as well as lower occupational health and safety standards in the US and Canada. In evaluating this argument, the article examines working conditions in US-owned factories in the Mexican maquiladora zone, reviews the current occupational health and safety regulatory structure in Mexico, and considers those institutions established by the European Community to protect workers against the flight of hazardous industries. The article concludes that the harmonization of labor norms throughout North American and the establishment of a functional North American regulatory structure following the precedents set by the European Community are necessary steps to ensure that NAFTA does not produce the feared flight of hazardous industries to Mexico nor degrade the health of workers in Mexico, Canada, or the US.

29 CFR 1910.95 - Occupational noise exposure.

Code of Federal Regulations, 2012 CFR

2012-07-01

... OCCUPATIONAL SAFETY AND HEALTH STANDARDS Occupational Health and Environmental Control § 1910.95 Occupational... engineering controls shall be utilized. If such controls fail to reduce sound levels within the levels of...) Monitoring shall be repeated whenever a change in production, process, equipment or controls increases noise...

29 CFR 1910.95 - Occupational noise exposure.

Code of Federal Regulations, 2014 CFR

2014-07-01

... OCCUPATIONAL SAFETY AND HEALTH STANDARDS Occupational Health and Environmental Control § 1910.95 Occupational... engineering controls shall be utilized. If such controls fail to reduce sound levels within the levels of...) Monitoring shall be repeated whenever a change in production, process, equipment or controls increases noise...

29 CFR 1910.95 - Occupational noise exposure.

Code of Federal Regulations, 2011 CFR

2011-07-01

... OCCUPATIONAL SAFETY AND HEALTH STANDARDS Occupational Health and Environmental Control § 1910.95 Occupational... engineering controls shall be utilized. If such controls fail to reduce sound levels within the levels of...) Monitoring shall be repeated whenever a change in production, process, equipment or controls increases noise...

Is it time to reassess current safety standards for glyphosate-based herbicides?

PubMed Central

Blumberg, Bruce; Antoniou, Michael N; Benbrook, Charles M; Carroll, Lynn; Colborn, Theo; Everett, Lorne G; Hansen, Michael; Landrigan, Philip J; Lanphear, Bruce P; Mesnage, Robin; vom Saal, Frederick S; Welshons, Wade V; Myers, John Peterson

2017-01-01

Use of glyphosate-based herbicides (GBHs) increased ∼100-fold from 1974 to 2014. Additional increases are expected due to widespread emergence of glyphosate-resistant weeds, increased application of GBHs, and preharvest uses of GBHs as desiccants. Current safety assessments rely heavily on studies conducted over 30 years ago. We have considered information on GBH use, exposures, mechanisms of action, toxicity and epidemiology. Human exposures to glyphosate are rising, and a number of in vitro and in vivo studies challenge the basis for the current safety assessment of glyphosate and GBHs. We conclude that current safety standards for GBHs are outdated and may fail to protect public health or the environment. To improve safety standards, the following are urgently needed: (1) human biomonitoring for glyphosate and its metabolites; (2) prioritisation of glyphosate and GBHs for hazard assessments, including toxicological studies that use state-of-the-art approaches; (3) epidemiological studies, especially of occupationally exposed agricultural workers, pregnant women and their children and (4) evaluations of GBHs in commercially used formulations, recognising that herbicide mixtures likely have effects that are not predicted by studying glyphosate alone. PMID:28320775

Occupational Standards: International Perspectives.

ERIC Educational Resources Information Center

Oliveira, Joao, Ed.

These nine papers from a conference of the International Research Network for Training and Development focus on occupational classification, standards, and certification. "Introduction" (Joao Oliveria) presents synopses with highlights from the papers. Part I offers an overview of recent developments in the United States in…

25 CFR 256.11 - What are the occupancy and square footage standards for a dwelling provided with Category C...

Code of Federal Regulations, 2014 CFR

2014-04-01

... 25 Indians 1 2014-04-01 2014-04-01 false What are the occupancy and square footage standards for a..., DEPARTMENT OF THE INTERIOR HOUSING HOUSING IMPROVEMENT PROGRAM § 256.11 What are the occupancy and square... bedrooms Total dwelling square footage 1 (maximum) 1-3 2 2 900 4-6 2 3 1050 7 or more 2 4 31350 1 Total...

25 CFR 256.11 - What are the occupancy and square footage standards for a dwelling provided with Category C...

Code of Federal Regulations, 2011 CFR

2011-04-01

... 25 Indians 1 2011-04-01 2011-04-01 false What are the occupancy and square footage standards for a..., DEPARTMENT OF THE INTERIOR HOUSING HOUSING IMPROVEMENT PROGRAM § 256.11 What are the occupancy and square... bedrooms Total dwelling square footage 1 (maximum) 1-3 2 2 900 4-6 2 3 1050 7 or more 2 4 31350 1 Total...

25 CFR 256.11 - What are the occupancy and square footage standards for a dwelling provided with Category C...

Code of Federal Regulations, 2010 CFR

2010-04-01

... 25 Indians 1 2010-04-01 2010-04-01 false What are the occupancy and square footage standards for a..., DEPARTMENT OF THE INTERIOR HOUSING HOUSING IMPROVEMENT PROGRAM § 256.11 What are the occupancy and square... bedrooms Total dwelling square footage 1 (maximum) 1-3 2 2 900 4-6 2 3 1050 7 or more 2 4 31350 1 Total...

25 CFR 256.11 - What are the occupancy and square footage standards for a dwelling provided with Category C...

Code of Federal Regulations, 2013 CFR

2013-04-01

... 25 Indians 1 2013-04-01 2013-04-01 false What are the occupancy and square footage standards for a..., DEPARTMENT OF THE INTERIOR HOUSING HOUSING IMPROVEMENT PROGRAM § 256.11 What are the occupancy and square... bedrooms Total dwelling square footage 1 (maximum) 1-3 2 2 900 4-6 2 3 1050 7 or more 2 4 31350 1 Total...

25 CFR 256.11 - What are the occupancy and square footage standards for a dwelling provided with Category C...

Code of Federal Regulations, 2012 CFR

2012-04-01

... 25 Indians 1 2012-04-01 2011-04-01 true What are the occupancy and square footage standards for a..., DEPARTMENT OF THE INTERIOR HOUSING HOUSING IMPROVEMENT PROGRAM § 256.11 What are the occupancy and square... bedrooms Total dwelling square footage 1 (maximum) 1-3 2 2 900 4-6 2 3 1050 7 or more 2 4 31350 1 Total...

A Functional Classification of Occupations.

ERIC Educational Resources Information Center

McKinlay, Donald Bruce

The need for more and better manpower information is hampered by the lack of adequate occupational data classification systems. The diversity of interests in occupations probably accounts for the absence of consensus regarding either the general outlines or the specific details of a standardized occupational classification system which would…

10 CFR 20.1201 - Occupational dose limits for adults.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 1 2014-01-01 2014-01-01 false Occupational dose limits for adults. 20.1201 Section 20.1201 Energy NUCLEAR REGULATORY COMMISSION STANDARDS FOR PROTECTION AGAINST RADIATION Occupational Dose... surveys or other radiation measurements for the purpose of demonstrating compliance with the occupational...

10 CFR 20.1201 - Occupational dose limits for adults.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 1 2010-01-01 2010-01-01 false Occupational dose limits for adults. 20.1201 Section 20.1201 Energy NUCLEAR REGULATORY COMMISSION STANDARDS FOR PROTECTION AGAINST RADIATION Occupational Dose... surveys or other radiation measurements for the purpose of demonstrating compliance with the occupational...

10 CFR 20.1201 - Occupational dose limits for adults.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 1 2011-01-01 2011-01-01 false Occupational dose limits for adults. 20.1201 Section 20.1201 Energy NUCLEAR REGULATORY COMMISSION STANDARDS FOR PROTECTION AGAINST RADIATION Occupational Dose... surveys or other radiation measurements for the purpose of demonstrating compliance with the occupational...

10 CFR 20.1201 - Occupational dose limits for adults.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 1 2013-01-01 2013-01-01 false Occupational dose limits for adults. 20.1201 Section 20.1201 Energy NUCLEAR REGULATORY COMMISSION STANDARDS FOR PROTECTION AGAINST RADIATION Occupational Dose... surveys or other radiation measurements for the purpose of demonstrating compliance with the occupational...

10 CFR 20.1201 - Occupational dose limits for adults.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 1 2012-01-01 2012-01-01 false Occupational dose limits for adults. 20.1201 Section 20.1201 Energy NUCLEAR REGULATORY COMMISSION STANDARDS FOR PROTECTION AGAINST RADIATION Occupational Dose... surveys or other radiation measurements for the purpose of demonstrating compliance with the occupational...

Ornamental Horticulture Production Occupations. Curriculum Guide.

ERIC Educational Resources Information Center

Reneau, Fred; And Others

This curriculum guide contains guidesheets for the ornamental horticulture production occupations. Each guidesheet provides a job-relevant task; performance objective, with task, performance standard, source of standard, and conditions for performance of task; enabling objectives; a list of resources; teaching activities; a criterion-referenced…

29 CFR 1952.320 - Description of the plan as initially approved.

Code of Federal Regulations, 2013 CFR

2013-07-01

... specifically designed to cover the following areas: general industrial safety, construction safety, first aid... Section 1952.320 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH... structure, the Occupational Safety Standards Commission has the responsibility to adopt standards and...

29 CFR 1952.320 - Description of the plan as initially approved.

Code of Federal Regulations, 2012 CFR

2012-07-01

... specifically designed to cover the following areas: general industrial safety, construction safety, first aid... Section 1952.320 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH... structure, the Occupational Safety Standards Commission has the responsibility to adopt standards and...

29 CFR 1952.320 - Description of the plan as initially approved.

Code of Federal Regulations, 2014 CFR

2014-07-01

... specifically designed to cover the following areas: general industrial safety, construction safety, first aid... Section 1952.320 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH... structure, the Occupational Safety Standards Commission has the responsibility to adopt standards and...

EAACI position paper: skin prick testing in the diagnosis of occupational type I allergies.

PubMed

van Kampen, V; de Blay, F; Folletti, I; Kobierski, P; Moscato, G; Olivieri, M; Quirce, S; Sastre, J; Walusiak-Skorupa, J; Raulf-Heimsoth, M

2013-01-01

Skin prick testing (SPT) in combination with the clinical history of the patient is one important step in the diagnosis of IgE-mediated occupational allergies. However, skin test performance is related to the quality of allergen extracts. The present consensus document was prepared by an EAACI Task Force consisting of an expert panel of allergologists and occupational physicians from Germany, Italy, Spain, France, Austria, and Poland. All members of the panel were also involved in the data collection within the European multicentre study STADOCA (Standard diagnosis for occupational allergy). The aim of this Task Force was the assessment of the quality of commercially available SPT solutions for selected occupational allergens under standardized procedure conditions in different European centres and institutes of Occupational Medicine. The data evaluation shows a wide variability among SPT solutions and also indicates that the sensitivity of several SPT solutions is low. Therefore, improvement and standardization of SPT solutions for occupational allergens is highly recommended. Clinical practitioners should also not presume that their SPT solutions are fully reliable. The main objective of the document is to issue consensus suggestions for the use of SPT with occupational allergens based on the European multicentre study STADOCA, on existing scientific evidence and the expertise of a panel of allergologists. © 2013 John Wiley & Sons A/S. Published by Blackwell Publishing Ltd.

The development and regulation of occupational exposure limits in Singapore.

PubMed

Tang, Tan Kia; Siang, Lee Hock; Koh, David

2006-11-01

Singapore is an island republic in South East Asia with a workforce of about 2.1 million including 0.7 million employed in the manufacturing industry. Singapore's industry is diversified and the main growth sectors include microelectronics, chemical, petrochemical, pharmaceutical, and biomedical sectors. Exposure to chemical hazards is one of the main occupational health problems in the manufacturing sectors. The main roles of government in the protection of workers against safety and health hazards are to set standards and provide a proper infrastructure for industry to self-regulate. The occupation safety and health laws must provide adequate protection of workforce but must not disadvantage local industry in this globally competitive economy. To ensure a level playing field, Singapore's occupational exposure standards are benchmarked against those established in the developed countries. These standards are reviewed regularly to ensure they are realistic and relevant in tandem with worldwide trends. Industry and stakeholders are consulted before any new standards are introduced. In enforcing the laws relating to exposure standards, legal and administrative procedures are followed to ensure fairness and to prevent abuse.

Specific immunotherapy and biological treatments for occupational allergy.

PubMed

Moscato, Gianna; Pala, Gianni; Sastre, Joaquin

2014-12-01

Occupational allergy represents a substantial health, social, and financial burden for the society. Its management is a complex task that, in selected cases, may also include allergen-specific immunotherapy. The purpose of this article is to review clinical data on allergen immunotherapy and biological treatments applied to occupational allergy in 2013. Immunotherapy in occupational allergic diseases has been scarcely used, and only for a few sensitizers, such as latex, flour, and Hymenoptera venom, partly due to the lack of standardized extracts. The recent use of the molecular diagnosis can improve the indication and selection of suitable allergens for preparing new standardized and powerful extracts for immunotherapy. Some recent reports suggest a beneficial role of treatment with omalizumab in workers with occupational asthma who continue to be exposed to the causal agent. Although scarce, available data suggest that immunotherapy and biological treatments may allow allergic workers to continue their work activity, but further studies are needed to standardize extracts and to evaluate the cost-effectiveness of these treatments, when exposure at the workplace cannot be avoided.

Transportation Safety Standards for Wheelchair Users: A Review of Voluntary Standards for Improved Safety, Usability, and Independence of Wheelchair-Seated Travelers

ERIC Educational Resources Information Center

Schneider, Lawrence W.; Manary, Miriam A.; Hobson, Douglas A.

2008-01-01

Safe transportation for wheelchair users who do not transfer to the vehicle seat when traveling in motor vehicles requires after-market wheelchair tiedown and occupant restraint systems (WTORS) to secure the wheelchair and provide crashworthy restraint for the wheelchair-seated occupant. In the absence of adequate government safety standards,…

Framework for Assessing the ICT Competency in Teachers up to the Requirements of "Teacher" Occupational Standard

ERIC Educational Resources Information Center

Avdeeva, Svetlana; Zaichkina, Olga; Nikulicheva, Nataliya; Khapaeva, Svetlana

2016-01-01

The paper deals with problems of working out a test framework for the assessment of teachers' ICT competency in line with the requirements of "Teacher" occupational standard. The authors have analyzed the known approaches to assessing teachers' ICT competency--ISTE Standards and UNESCO ICT CFT and have suggested their own approach to…

Classification Structures for Career Information. Occupational Statements, Volume I. Part 1. SOC Numbers 1099 to 4490. Interim Edition.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

"Classification Structures for Career Information" was created to provide Career Information Delivery Systems (CIDS) staff with pertinent and useful occupational information arranged according to the Standard Occupational Classification (SOC) structure. Through this publication, the National Occupational Information Coordinating…

Classification Structures for Career Information. Occupational Statements, Volume I. Part 2. SOC Numbers 4499 to 6560. Interim Edition.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

"Classification Structures for Career Information" was created to provide Career Information Delivery Systems (CIDS) staff with pertinent and useful occupational information arranged according to the Standard Occupational Classification (SOC) structure. Through this publication, the National Occupational Information Coordinating…

Classification Structures for Career Information. Occupational Statements, Volume I. Part 3. SOC Numbers 6699 to 9900. Interim Edition.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

"Classification Structures for Career Information" was created to provide Career Information Delivery Systems (CIDS) staff with pertinent and useful occupational information arranged according to the Standard Occupational Classification (SOC) structure. Through this publication, the National Occupational Information Coordinating…

29 CFR 1910.1450 - Occupational exposure to hazardous chemicals in laboratories.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 6 2010-07-01 2010-07-01 false Occupational exposure to hazardous chemicals in laboratories. 1910.1450 Section 1910.1450 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) OCCUPATIONAL SAFETY AND HEALTH STANDARDS (CONTINUED) Toxic and Hazardous Substances §...

29 CFR 1910.1450 - Occupational exposure to hazardous chemicals in laboratories.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 29 Labor 6 2013-07-01 2013-07-01 false Occupational exposure to hazardous chemicals in laboratories. 1910.1450 Section 1910.1450 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) OCCUPATIONAL SAFETY AND HEALTH STANDARDS (CONTINUED) Toxic and Hazardous Substances §...

29 CFR 1910.1450 - Occupational exposure to hazardous chemicals in laboratories.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 6 2014-07-01 2013-07-01 true Occupational exposure to hazardous chemicals in laboratories. 1910.1450 Section 1910.1450 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) OCCUPATIONAL SAFETY AND HEALTH STANDARDS (CONTINUED) Toxic and Hazardous Substances §...

75 FR 24746 - Occupational Exposure to Noise Standard; Extension of the Office of Management and Budget's (OMB...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-05

... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2010-0017... Information Collection (Paperwork) Requirements AGENCY: Occupational Safety and Health Administration (OSHA..., Occupational Safety and Health Administration, Room N-2625, 200 Constitution Avenue, NW., Washington, DC 20210...

Making use of research: clinical views on an evaluation of everyday technology use.

PubMed

Nygård, Louise; Kottorp, Anders; Rosenberg, Lena

2015-01-01

The study aim was to investigate how and when an evaluation of perceived difficulty in use of everyday technology (Everyday Technology Use Questionnaire, ETUQ) could be used in clinical occupational therapy. Eight focus-group interviews were undertaken with a total of 42 participants (occupational therapists), and data were analysed with a constant comparative approach. The findings are presented in four main categories, including (i) appropriate purposes and contexts for using ETUQ, (ii) standardization versus individual flexibility, (iii) approaching everyday technology use and occupation as one whole, and (iv) synthesizing and documentation. In conclusion, the participants considered ability to use technology to be an important topic for occupational therapy, particularly in investigations of clients with subtle disabilities and in connection with discharge from hospital - but not in inpatient care. They had different views on how to integrate ETUQ with evaluations of occupational performance, and new ideas on how information about clients' ability to use technology could be utilized in interventions. They held standardized evaluations in high regard, but a paradox appeared in that many of them would use ETUQ in a non-standardized way, while simultaneously asking for a standardized output to be used in clients' medical files and to guide interventions.

Complex mixtures in industrial workspaces: lessons for indoor air quality evaluations.

PubMed

Lippy, B E; Turner, R W

1991-11-01

Acceptable occupational exposure levels for hundreds of airborne concentrations of dusts, vapors, fumes, and gases have been set by consensus organizations and regulatory bodies for decades. These levels have established tremendous precedent and are tempting reference values in the relatively new field of indoor air quality evaluations where validated criteria are greatly needed. The American Conference of Government Industrial Hygienists (ACGIH) has been the most visible and productive group setting these guidelines for industrial exposure. The ACGIH Chemical Substances Committee has published an annual list of threshold limit values (TLVs) for more than 40 years. Currently the list covers more than 400 substances. In 1989, the Occupational Safety and Health Administration (OSHA) published updated permissible exposure limits (PELs) for approximately 600 substances. Most PELs before this update were adopted from the 1968 ACGIH list of TLVs and consensus standards of the American Standards Association. This OSHA update has resulted in reductions of 212 PELs and the addition of 164 new levels. The magnitude of the problem of protecting workers can be seen by the small fraction that the OSHA PELs represent of the more than 60,000 entries in the National Institute for Occupational Safety and Health's Registry of Toxic Effects of Chemical Substances. None of these levels, whether guidelines or regulatory requirements, are established based on any possible synergistic effect with other chemicals. The only guidance given by the ACGIH for synergistic effects is that such cases must be determined individually. Clearly, there are major drawbacks in using occupational standards and guidelines for evaluating the health effects of chemical agents that can be found in office settings, often in concentrations orders of magnitude less than what is routinely measured in the workplace. These guidelines are even less valuable when the concern is the complex mixing of chemicals in nonoccupational environments.

Investigating methods for determining mismatch in near side vehicle impacts - biomed 2009.

PubMed

Loftis, Kathryn; Martin, R Shayn; Meredith, J Wayne; Stitzel, Joel

2009-01-01

This study investigates vehicle mismatch in severe side-impact motor vehicle collisions. Research conducted by the Insurance Institute for Highway Safety has determined that vehicle mismatch often leads to very severe injuries for occupants in the struck vehicle, because the larger striking vehicle does not engage the lower sill upon impact, resulting in severe intrusions into the occupant compartment. Previous studies have analyzed mismatched collisions according to vehicle type, not by the difference in vehicle height and weight. It is hypothesized that the combination of a heavier striking vehicle at a taller height results in more intrusion for the struck vehicle and severe injury for the near side occupant. By analyzing Crash Injury Research and Engineering Network (CIREN) data and occupant injury severity, it is possible to study intrusion and injuries that occur due to vehicle mismatch. CIREN enrolls seriously injured occupants involved in motor vehicle crashes (MVC) across the United States. From the Toyota-Wake Forest University CIREN center, 23 near side impact cases involving two vehicles were recorded. Only 3 of these seriously injured occupant cases were not considered mismatched according to vehicle curb weight, and only 2 were not considered vehicle mismatched according to height differences. The mismatched CIREN cases had an average difference in vehicle curb weight of 737.0 kg (standard deviation of 646.8) and an average difference in vehicle height of 16.38 cm (standard deviation of 7.186). There were 13 occupants with rib fractures, 12 occupants with pelvic fractures, 9 occupants with pulmonary contusion, and 5 occupants with head injuries, among other multiple injuries. The average Injury Severity Score (ISS) for these occupants was 27, with a standard deviation of 16. The most serious injuries resulted in an Abbreviated Injury Scale (AIS) of 5, which included 3 occupants. Each of these AIS 5 injuries were to different body regions on different occupants. By analyzing the vehicle information and occupant injuries, it was found that the vehicle mismatch problem involves differences in vehicle weights and heights and also results in severe injuries to multiple body regions for the near side occupant involved. There was a low correlation of vehicle height difference to occupant ISS.

Work accident victims: a comparison between non-standard and standard workers in Belgium

PubMed Central

Alali, Hanan; Abdel Wahab, Magd; Van Hecke, Tanja; Braeckman, Lutgart

2016-01-01

Background The fast growth of non-standard employment in developed countries highlights the importance of studying the influence of contract type on worker’s safety and health. Objective The main purpose of our study is to investigate whether non-standard workers are more injured than standard workers or not. Additionally, other risk factors for occupational accidents are investigated. Methods Data from the Belgian surveys on work ability in 2009 and 2011 are used. During their annual occupational health examination, workers were asked to fill in a self-administered questionnaire. In total, 1886 complete responses are collected and analyzed using logistic regression. Results Temporary workers did not have higher injury rates than permanent workers [OR 0.5, 95% confidence interval 0.2–1.2]. Low-educated, less-experienced workers and those exposed to dangerous conditions are more frequent victims of occupational accidents. Conclusion The present data do not support the hypothesis that non-standard workers have more injuries than standard workers. Our results about occupational accidents derived from a non-representative sample of the Belgian workforce and cannot be generalized due to the heterogeneity in job organization and labor regulations between countries. Further research is needed to extend our findings and to seek other factors that may be associated with work accidents. PMID:27092408

Work accident victims: a comparison between non-standard and standard workers in Belgium.

PubMed

Alali, Hanan; Abdel Wahab, Magd; Van Hecke, Tanja; Braeckman, Lutgart

2016-04-01

The fast growth of non-standard employment in developed countries highlights the importance of studying the influence of contract type on worker's safety and health. The main purpose of our study is to investigate whether non-standard workers are more injured than standard workers or not. Additionally, other risk factors for occupational accidents are investigated. Data from the Belgian surveys on work ability in 2009 and 2011 are used. During their annual occupational health examination, workers were asked to fill in a self-administered questionnaire. In total, 1886 complete responses are collected and analyzed using logistic regression. Temporary workers did not have higher injury rates than permanent workers [OR 0.5, 95% confidence interval 0.2-1.2]. Low-educated, less-experienced workers and those exposed to dangerous conditions are more frequent victims of occupational accidents. The present data do not support the hypothesis that non-standard workers have more injuries than standard workers. Our results about occupational accidents derived from a non-representative sample of the Belgian workforce and cannot be generalized due to the heterogeneity in job organization and labor regulations between countries. Further research is needed to extend our findings and to seek other factors that may be associated with work accidents.

The current status of occupational health in China

PubMed Central

Zhang, Xueyan; Li, Tao

2010-01-01

Objective This study aimed to summarize the major health problems among Chinese workers, the strategies and measures for occupational hazards control, the network and organizations of occupational health administration, and the achievements and current challenges of occupational health in China. Results The situation of occupational health was found to be still serious in China. Enterprises with occupational hazards were widely distributed, the exposed population and cases of occupational diseases were numerous, and occupational risks were being transferred from the city to the countryside and from developed areas to developing ones. New emerging problems coexisted with traditional occupational hazards. Besides, a lack of occupational health services for migrant workers could be a major problem for a long time. Conclusions It is necessary to improve the fields related to occupational health, such as the supervision and administration of small- and medium-scale enterprises, research into key techniques for the prevention and control of occupational hazards, systems for the diagnosis and reporting of occupational diseases, and the training of health professionals. PMID:21432554

Variation in Men's Dietary Intake Between Occupations, Based on Data From the Japan Environment and Children's Study.

PubMed

Tanaka, Rie; Tsuji, Mayumi; Asakura, Keiko; Senju, Ayako; Shibata, Eiji; Kusuhara, Koichi; Morokuma, Seiichi; Sanefuji, Masafumi; Kawamoto, Toshihiro

2018-06-01

There has been increasing interest in dietary health promotion in the workplace. Although many previous studies have focused on dietary habits in specific occupations, variation between occupational groups requires clarification. The present study aimed to examine differences in food and nutrient intake between occupational groups, using detailed classification. A cross-sectional study was conducted using data from the Japan Environment and Children's Study. The study included 38,721 employed Japanese expectant fathers aged between 20 and 65 years. Dietary intake was assessed using a food frequency questionnaire. Occupations were categorized into 11 categories according to the Japan Standard Occupational Classification. Analysis of variance and analysis of covariance were performed to compare dietary intake of occupational groups. Logistic regression analysis was performed to examine the differences in adherence to dietary recommendations across occupations. Dietary intake differed significantly between occupations. Specific dietary intake was observed in security and agricultural workers, who tended to exhibit higher consumption levels for numerous foods and nutrients. In addition, relative to other workers, security workers showed higher intake of dairy products and calcium, and agricultural workers consumed larger amounts of pickles and salt. The study categorized occupations into detailed categories using the Japan Standard Occupational Classification, which facilitated the clarification of overall dietary trends across occupations and identification of specific dietary characteristics in individual occupations. The findings could aid in workplace health promotion.

Public Utilities Occupations. Reprinted from the Occupational Outlook Handbook, 1978-79 Edition.

ERIC Educational Resources Information Center

Bureau of Labor Statistics (DOL), Washington, DC.

Focusing on public utilities occupations, this document is one in a series of forty-one reprints from the Occupational Outlook Handbook providing current information and employment projections for individual occupations and industries through 1985. The specific occupations covered in this document include occupations in the electric power…

A framework for quantifying the impact of occupant behavior on energy savings of energy conservation measures

DOE PAGES

Sun, K; Hong, T

2017-07-01

© 2017 Elsevier B.V. To improve energy efficiency—during new buildings design or during a building retrofit—evaluating the energy savings potential of energy conservation measures (ECMs) is a critical task. In building retrofits, occupant behavior significantly impacts building energy use and is a leading factor in uncertainty when determining the effectiveness of retrofit ECMs. Current simulation-based assessment methods simplify the representation of occupant behavior by using a standard or representative set of static and homogeneous assumptions ignoring the dynamics, stochastics, and diversity of occupant's energy-related behavior in buildings. The simplification contributes to significant gaps between the simulated and measured actual energymore » performance of buildings. This study presents a framework for quantifying the impact of occupant behaviors on ECM energy savings using building performance simulation. During the first step of the study, three occupant behavior styles (austerity, normal, and wasteful) were defined to represent different levels of energy consciousness of occupants regarding their interactions with building energy systems (HVAC, windows, lights and plug-in equipment). Next, a simulation workflow was introduced to determine a range of the ECM energy savings. Then, guidance was provided to interpret the range of ECM savings to support ECM decision making. Finally, a pilot study was performed in a real building to demonstrate the application of the framework. Simulation results show that the impact of occupant behaviors on ECM savings vary with the type of ECM. Occupant behavior minimally affects energy savings for ECMs that are technology-driven (the relative savings differ by less than 2%) and have little interaction with the occupants; for ECMs with strong occupant interaction, such as the use of zonal control variable refrigerant flow system and natural ventilation, energy savings are significantly affected by occupant behavior (the relative savings differ by up to 20%). The study framework provides a novel, holistic approach to assessing the uncertainty of ECM energy savings related to occupant behavior, enabling stakeholders to understand and assess the risk of adopting energy efficiency technologies for new and existing buildings.« less

A framework for quantifying the impact of occupant behavior on energy savings of energy conservation measures

DOE PAGES

Sun, Kaiyu; Hong, Tianzhen

2017-04-27

To improve energy efficiency—during new buildings design or during a building retrofit—evaluating the energy savings potential of energy conservation measures (ECMs) is a critical task. In building retrofits, occupant behavior significantly impacts building energy use and is a leading factor in uncertainty when determining the effectiveness of retrofit ECMs. Current simulation-based assessment methods simplify the representation of occupant behavior by using a standard or representative set of static and homogeneous assumptions ignoring the dynamics, stochastics, and diversity of occupant's energy-related behavior in buildings. The simplification contributes to significant gaps between the simulated and measured actual energy performance of buildings. Thismore » paper presents a framework for quantifying the impact of occupant behaviors on ECM energy savings using building performance simulation. During the first step of the study, three occupant behavior styles (austerity, normal, and wasteful) were defined to represent different levels of energy consciousness of occupants regarding their interactions with building energy systems (HVAC, windows, lights and plug-in equipment). Next, a simulation workflow was introduced to determine a range of the ECM energy savings. Then, guidance was provided to interpret the range of ECM savings to support ECM decision making. Finally, a pilot study was performed in a real building to demonstrate the application of the framework. Simulation results show that the impact of occupant behaviors on ECM savings vary with the type of ECM. Occupant behavior minimally affects energy savings for ECMs that are technology-driven (the relative savings differ by less than 2%) and have little interaction with the occupants; for ECMs with strong occupant interaction, such as the use of zonal control variable refrigerant flow system and natural ventilation, energy savings are significantly affected by occupant behavior (the relative savings differ by up to 20%). Finally, the study framework provides a novel, holistic approach to assessing the uncertainty of ECM energy savings related to occupant behavior, enabling stakeholders to understand and assess the risk of adopting energy efficiency technologies for new and existing buildings.« less

A framework for quantifying the impact of occupant behavior on energy savings of energy conservation measures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sun, Kaiyu; Hong, Tianzhen

To improve energy efficiency—during new buildings design or during a building retrofit—evaluating the energy savings potential of energy conservation measures (ECMs) is a critical task. In building retrofits, occupant behavior significantly impacts building energy use and is a leading factor in uncertainty when determining the effectiveness of retrofit ECMs. Current simulation-based assessment methods simplify the representation of occupant behavior by using a standard or representative set of static and homogeneous assumptions ignoring the dynamics, stochastics, and diversity of occupant's energy-related behavior in buildings. The simplification contributes to significant gaps between the simulated and measured actual energy performance of buildings. Thismore » paper presents a framework for quantifying the impact of occupant behaviors on ECM energy savings using building performance simulation. During the first step of the study, three occupant behavior styles (austerity, normal, and wasteful) were defined to represent different levels of energy consciousness of occupants regarding their interactions with building energy systems (HVAC, windows, lights and plug-in equipment). Next, a simulation workflow was introduced to determine a range of the ECM energy savings. Then, guidance was provided to interpret the range of ECM savings to support ECM decision making. Finally, a pilot study was performed in a real building to demonstrate the application of the framework. Simulation results show that the impact of occupant behaviors on ECM savings vary with the type of ECM. Occupant behavior minimally affects energy savings for ECMs that are technology-driven (the relative savings differ by less than 2%) and have little interaction with the occupants; for ECMs with strong occupant interaction, such as the use of zonal control variable refrigerant flow system and natural ventilation, energy savings are significantly affected by occupant behavior (the relative savings differ by up to 20%). Finally, the study framework provides a novel, holistic approach to assessing the uncertainty of ECM energy savings related to occupant behavior, enabling stakeholders to understand and assess the risk of adopting energy efficiency technologies for new and existing buildings.« less

Development of a Job-Exposure Matrix (AsbJEM) to Estimate Occupational Exposure to Asbestos in Australia.

PubMed

van Oyen, Svein C; Peters, Susan; Alfonso, Helman; Fritschi, Lin; de Klerk, Nicholas H; Reid, Alison; Franklin, Peter; Gordon, Len; Benke, Geza; Musk, Arthur W

2015-07-01

Occupational exposure data on asbestos are limited and poorly integrated in Australia so that estimates of disease risk and attribution of disease causation are usually calculated from data that are not specific for local conditions. To develop a job-exposure matrix (AsbJEM) to estimate occupational asbestos exposure levels in Australia, making optimal use of the available exposure data. A dossier of all available exposure data in Australia and information on industry practices and controls was provided to an expert panel consisting of three local industrial hygienists with thorough knowledge of local and international work practices. The expert panel estimated asbestos exposures for combinations of occupation, industry, and time period. Intensity and frequency grades were estimated to enable the calculation of annual exposure levels for each occupation-industry combination for each time period. Two indicators of asbestos exposure intensity (mode and peak) were used to account for different patterns of exposure between occupations. Additionally, the probable type of asbestos fibre was determined for each situation. Asbestos exposures were estimated for 537 combinations of 224 occupations and 60 industries for four time periods (1943-1966; 1967-1986; 1987-2003; ≥2004). Workers in the asbestos manufacturing, shipyard, and insulation industries were estimated to have had the highest average exposures. Up until 1986, 46 occupation-industry combinations were estimated to have had exposures exceeding the current Australian exposure standard of 0.1 f ml(-1). Over 90% of exposed occupations were considered to have had exposure to a mixture of asbestos varieties including crocidolite. The AsbJEM provides empirically based quantified estimates of asbestos exposure levels for Australian jobs since 1943. This exposure assessment application will contribute to improved understanding and prediction of asbestos-related diseases and attribution of disease causation. © The Author 2015. Published by Oxford University Press on behalf of the British Occupational Hygiene Society.

Hooked on a feeling: emotional labor as an occupational hazard of the post-industrial age.

PubMed

Andrews, Bonnie K; Karcz, Susan; Rosenberg, Beth

2008-01-01

Emotional labor is a subtle but serious occupational hazard that is likely to spread rapidly as the global service economy continues to grow. Emotional labor requires more than just acting friendly and being helpful to customers; the worker must manage his or her emotions to create a company-dictated experience for customers. The practice of emotional labor in an unsupportive work environment produces work-related stress, which has a wide range of potentially serious health effects. Though many employers do not acknowledge the existence of emotional labor, it is a real occupational hazard that may generate life-altering effects on physical and emotional health. While no official regulations or identification standards specify emotional labor as an occupational hazard, some guidelines exist regarding its outcome: occupational stress. Emotional labor should be recognized as an occupational hazard by the Occupational Safety and Health Administration (OSHA), but this hazard does not lend itself to regulation through standards. The business culture that demands its performance is questioned.

Technical/Engineering. Georgia Core Standards for Occupational Clusters.

ERIC Educational Resources Information Center

Georgia Univ., Athens. Dept. of Occupational Studies.

This document lists core standards and occupational knowledge and skills that have been identified and validated by industry as necessary to all Georgia students in secondary-level technical/engineering programs. First, foundation skills are grouped as follows: basic skills (reading, writing, arithmetic/mathematics, listening, speaking); thinking…

78 FR 16538 - Agency Information Collection Activities; Submission for OMB Review; Comment Request; Standard on...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-15

.... SUMMARY: The Department of Labor (DOL) is submitting the Occupational Safety and Health Administration (OSHA) sponsored information collection request (ICR) titled, ``Standard on 4,4'-Methylenedianiline in...'-Methylenedianiline (MDA) in Construction protects workers from adverse health effects associated with occupational...

29 CFR 1910.163 - Fixed extinguishing systems, water spray and foam.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Section 1910.163 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS Fire Protection Fixed Fire... extinguishing agent, installed to meet a particular OSHA standard. These systems shall also comply with § 1910...

29 CFR 1910.163 - Fixed extinguishing systems, water spray and foam.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Section 1910.163 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS Fire Protection Fixed Fire... extinguishing agent, installed to meet a particular OSHA standard. These systems shall also comply with § 1910...

77 FR 47817 - Proposed Information Collection; Comment Request; Usage of Elevators for Occupant Evacuation...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-10

... DEPARTMENT OF COMMERCE National Institute of Standards and Technology Proposed Information... Institute of Standards and Technology (NIST), Commerce. ACTION: Notice. SUMMARY: The Department of Commerce... by occupants of existing multi- story buildings in the United States during fire emergencies. This...

76 FR 64353 - Request for Public Comment on Draft Document: “Criteria for a Recommended Standard: Occupational...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-18

... Institute for Occupational Safety and Health (NIOSH) of the Centers for Disease Control and Prevention (CDC...: The National Institute for Occupational Safety and Health (NIOSH) of the Centers for Disease Control..., Director, National Institute for Occupational Safety and Health, Centers for Disease Control and Prevention...

Current employment status, occupational category, occupational hazard exposure and job stress in relation to telomere length: the Multiethnic Study of Atherosclerosis (MESA).

PubMed

Fujishiro, Kaori; Diez-Roux, Ana V; Landsbergis, Paul A; Jenny, Nancy Swords; Seeman, Teresa

2013-08-01

Telomere length has been proposed as a biomarker of cell senescence, which is associated with a wide array of adverse health outcomes. While work is a major determinant of health, few studies have investigated the association of telomere length with various dimensions of occupation. Accelerated cellular aging could be a common pathway linking occupational exposure to several health outcomes. Leukocyte telomere length was assessed using quantitative PCR in a community-based sample of 981 individuals (age: 45-84 years). Questionnaires were used to collect information on current employment status, current or main occupation before retirement and job strain. The Occupational Resource Network (O*NET) database was linked to the questionnaire data to create five exposure measures: physical activity on the job, physical hazard exposure, interpersonal stressors, job control and job demands. Linear regression was used to estimate associations of occupational characteristics with telomere lengths after adjustment for age, sex, race, socioeconomic position and several behavioural risk factors. There were no mean differences in telomere lengths across current employment status, occupational category, job strain categories or levels of most O*NET exposure measures. There was also no evidence that being in lower status occupational categories or being exposed to higher levels of adverse physical or psychosocial exposures accelerated the association between age and telomere shortening. Cellular aging as reflected by shorter telomeres does not appear to be an important pathway linking occupation to various health outcomes.

Occupational hazards of missile operations with special regard to the hydrazine propellants.

PubMed

Back, K C; Carter, V L; Thomas, A A

1978-04-01

The second generation of ballistic missiles and boosters, characterized by increased range and quick reaction capability, required the development of new high-energy storage propellants. This exploration led to the introduction of hydrazine (Hz), monomethylhydrazine (MMH), and 1,1-dimethylhydrazine (UDMH) into the USAF inventory. These compounds are all storable, noncryogenic, high-energy fuels which may be used alone or in combination as mixed amine fuels. Early toxicology experiments were to produce data on acute and subacute effects of the propellants in order to set standards for test and operational procedures to protect propellant handlers. The early work indicated that, despite similar chemical characteristics, there were marked differences between the compounds in terms of toxicological mechanisms. Since the propellant systems have been used for some 15 years, recent emphasis on toxicology has been centered on the more chronic effects and on an increasing body of evidence from animal experiments that the compounds may possess oncogenic potential as well as chronic systemic effects. This paper addresses itself to data leading up to current occupational standards.

[The scale and application of the norm of occupational stress on the professionals in Chengdu and Chongqing area].

PubMed

Zeng, Fan-Hua; Wang, Zhi-Ming; Wang, Mian-Zhen; Lan, Ya-Jia

2004-12-01

To establish the scale of the norm of occupational stress on the professionals and put it into practice. T scores were linear transformations of raw scores, derived to have a mean of 50 and a standard deviation of 10. The scale standard of the norm was formulated in line with the principle of normal distribution. (1) For the occupational role questionnaire (ORQ) and personal strain questionnaire (PSQ) scales, high scores suggested significant levels of occupational stress and psychological strain, respectively. T scores >/= 70 indicated a strong probability of maladaptive stress, debilitating strain, or both. T scores in 60 approximately 69 suggested mild levels of maladaptive stress and strain, and in 40 approximately 59 were within one standard deviation of the mean and should be interpreted as being within normal range. T scores < 40 indicated a relative absence of occupational stress or psychological strain. For the personal resources questionnaire (PRQ) scales, high scores indicated highly developed coping resources. T scores < 30 indicated a significant lack of coping resources. T scores in 30 approximately 39 suggested mild deficits in coping skills, and in 40 approximately 59 indicated average coping resources, where as higher scores (i.e., >/= 60) indicated increasingly strong coping resources. (2) This study provided raw score to T-score conversion tables for each OSI-R scale for the total normative sample as well as for gender, and several occupational groups, including professional engineer, professional health care, economic business, financial business, law, education and news. OSI-R profile forms for total normative samples, gender and occupation were also offered according to the conversion tables. The norm of occupational stress can be used as screening tool, organizational/occupational assessment, guide to occupational choice and intervention measures.

Occupationally related contact dermatitis in North American food service workers referred for patch testing, 1994 to 2010.

PubMed

Warshaw, Erin M; Kwon, Gina P; Mathias, C G Toby; Maibach, Howard I; Fowler, Joseph F; Belsito, Donald V; Sasseville, Denis; Zug, Kathryn A; Taylor, James S; Fransway, Anthony F; Deleo, Vincent A; Marks, James G; Pratt, Melanie D; Storrs, Frances J; Zirwas, Matthew J; Dekoven, Joel G

2013-01-01

Contact dermatoses are common in food service workers (FSWs). This study aims to (1) determine the prevalence of occupationally related contact dermatitis among FSWs patch tested by the North American Contact Dermatitis Group (NACDG) and (2) characterize responsible allergens and irritants as well as sources. Cross-sectional analysis of patients patch tested by the NACDG, 1994 to 2010, was conducted. Of 35,872 patients patch tested, 1237 (3.4%) were FSWs. Occupationally related skin disease was significantly more common in FSWs when compared with employed non-FSWs. Food service workers were significantly more likely to have hand (P < 0.0001) and arm (P < 0.0006) involvement. The rates for irritant and allergic contact dermatitis in FSWs were 30.6% and 54.7%, respectively. Although the final diagnosis of irritant contact dermatitis was statistically higher in FSWs as compared with non-FSWs, allergic contact dermatitis was lower in FSWs as compared with non-FSWs. The most frequent currently relevant and occupationally related allergens were thiuram mix (32.5%) and carba mix (28.9%). Gloves were the most common source of responsible allergens. The NACDG standard tray missed at least 1 occupationally related allergen in 38 patients (4.3%). Among FSWs patch tested by the NACDG between 1994 and 2010, the most common allergens were thiuram mix and carba mix. Gloves were the most common source of responsible allergens.

[Risk analysis and assessment of occupational hazard fromindiumand its compounds in manufacture of liquid crystal display panel].

PubMed

Qiu, Haili; Zhou, Wei; Li, Zhimin; Tian, Dongchao; Weng, Shaofan; He, Juntao

2015-08-01

To understand the exposed positions and levels of indium and its compounds in manufacture of liquid crystal displays, and to evaluate the degree of occupational hazard from indium and its compounds. On-site investigation of occupational health, occupational hazard monitoring, and occupational health examination were used to evaluate the degree of occupational hazard from indium and its compounds in three manufacturers of liquid crystal display panel in Shenzhen, Guangdong, China. The time-weighted average (TWA) and short-term exposure limit (STEL) concentrations of indium and its compounds to which sputtering machine operating positions were exposed were less than 0.002~0.004 mg/m³ and 0.006~0.007 mg/m³, respectively, both of which complied with the National Hygienic Standard (PC-TWA = 0.1 mg/m³; PC-STEL = 0.3 mg/m³); the TWA and STEL concentrations of indium and its compounds to which grinding positions were exposed were 0.114~2.98 mg/m³ and 0.31~10.02 mg/m³, respectively, both of which exceeded the National Hygienic Standard with the highest concentration 33-fold higher than the standard. No significant health damages were found in exposed workers according to the results of occupational health examination. The grinding positions are the key to the control of occupational hazard from indium and its compounds in manufacture of liquid crystal display panel. The workers should be equipped with the anti-particulate full-face respirator, which is an effective way to prevent occupational hazard from indium and its compounds.

Comparison of occupational noise legislation in the Americas: an overview and analysis.

PubMed

Arenas, Jorge P; Suter, Alice H

2014-01-01

The workplace contributes significantly to the total dose of daily noise to which a person is subjected. Therefore, millions of people around the world are exposed to potentially dangerous noise levels and consequently, there is an urgent, global need for legislation to adequately protect the auditory health of workers. Occupational noise legislation has been adopted in many of the countries with different degrees of comprehensiveness and varying levels of sophistication. This paper presents a global view of current legislation on occupational noise in the 22 countries that make up the Americas, that is, Latin America, Canada, and the United States. Upon analysis of the legislation, there are notable differences among countries in the defined values for permissible exposure limit (PEL) and exchange rate. Of the countries that have regulations, the majority (81%) use a PEL of 85 dBA. A PEL of 85 dBA and the 3-dB exchange rate are currently used by 32% of the nations in the Americas. Most nations limit impulsive noise exposure to a peak unweighted sound pressure level of 140 dB (or dBC), while a few use slightly lower limits. However, 27% of the countries in the region still have not established regulations with respect to permissible noise levels and exchange rates. This fact is leaving millions of workers in the Americas unprotected against occupational noise. Provide an overview and analysis of the current legislation on occupational noise in the 22 countries that make up the Americas. The information on legislation, regulations, and standards discussed in this paper were obtained directly from official government sources in each country, the International Labour Organization database, or through various colleagues in each country. (1) There are notable differences among countries in the defined values for PEL and exchange rate. (2) Of the countries that have regulations, the majority (81%) use a PEL of 85 dBA. A PEL of 85 dBA and the 3-dB exchange rate are currently used by 32% of the nations in the Americas. (3) Most nations limit impulsive noise exposure to a peak unweighted sound pressure level of 140 dB (or dBC), while a few use slightly lower limits. (4) 27% of the countries in the region still have not established regulations with respect to permissible noise levels and exchange rates. (5) Millions of workers in the Americas are unprotected against occupational noise.

[Assessment and analysis of 108 health promotion demonstration enterprises in Jiangsu Province, China].

PubMed

Zhang, Qiaoyun; Xu, Zhongjie; Guo, Haijian; Wang, Jianfeng; Zhao, Yuan; Zhang, Hengdong; Xie, Yan; Zhu, Baoli

2015-02-01

To investigate the current status of carrying out the workplace health promotion (WHP) in the enterprises, and to provide a basis for formulation of relevant policies. The enterprises that declared Jiangsu Provincial Health Promotion Demonstration Enterprise received on-site assessment by the expert group, including organization management and protection measures, health management, workplace, health, and cultural environment. And a questionnaire survey was performed. The data of evaluations were analyzed by SPSS 19.0. In the last four years, 108 enterprises which had achieved the standard of Health Promotion Demonstration Enterprise were mainly distributed in Southern Jiangsu, including 34 (31.48%) large-sized enterprises, 58 (53.70%) medium-sized enterprises, and 16 (14.81%) small-sized enterprises. And there were 49 (45.37%) wholly foreign-owned enterprises. There were significant differences in the scores between different economic types of enterprises (F = 2.820, P = 0.014). The most deducted points were due to unqualified bulletin boards and warning label of occupation hazards, about 78 times (72.22%); 54.55% of the indices whose deduction rates were higher than 20% were related to occupational disease prevention and control. Regions and economic types affect carrying out WHP in enterprises. The current priority is to standardize physical work environment in China. The professional technical level should be improved, and the government needs to redouble efforts to promote the WHP.

Asthma Among Employed Adults, by Industry and Occupation - 21 States, 2013.

PubMed

Dodd, Katelynn E; Mazurek, Jacek M

2016-12-02

Workers in various industries and occupations are at risk for work-related asthma* (1). Data from the 2006-2007 adult Behavioral Risk Factor Surveillance System (BRFSS) Asthma Call-back Survey (ACBS), an in-depth asthma survey conducted with respondents who report an asthma diagnosis, from 33 states indicated that up to 48% of adult current asthma might be related to work and could therefore potentially be prevented (2). Identification of the industries and occupations with increased prevalence of asthma might inform work-related asthma intervention and prevention efforts. To assess the industry-specific and occupation-specific proportions of adults with current asthma by state, CDC analyzed data from the 2013 BRFSS industry and occupation module, collected from 21 states for participants aged ≥18 years who, at the time of the survey interview, were employed or had been out of work for <12 months. Among these respondents, 7.7% had current asthma; based on the Asthma Call-back Survey results, this finding means as many as 2.7 million U.S. workers might have asthma caused by or exacerbated by workplace conditions. State-specific variations in the prevalence of current asthma by industry and occupation were observed. By state, current asthma prevalence was highest among workers in the information industry (18.0%) in Massachusetts and in health care support occupations (21.5%) in Michigan. Analysis of BRFSS industry and occupation and optional asthma modules can be used to identify industries and occupations to assess for asthma among workers, identify workplace exposures, and guide the design and evaluation of effective work-related asthma prevention and education programs (1).

29 CFR 1960.17 - Alternate standards.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED... appropriate occupational safety and health committees, notify the Secretary and request approval of such...

29 CFR 1960.17 - Alternate standards.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) BASIC PROGRAM ELEMENTS FOR FEDERAL EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED... appropriate occupational safety and health committees, notify the Secretary and request approval of such...

29 CFR 1952.365 - Level of Federal enforcement.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION... Mexico occupational health and safety plan, discretionary Federal enforcement authority under section 18... authority fully or effectively; (7) Enforcement of occupational safety and health standards at all Federal...

29 CFR 1952.241 - Developmental schedule.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR..., Commissioner, Alaska Department of Labor, to James Lake, Regional Administrator for Occupational Safety and Health) follows: (a) Promulgation of occupational safety and health standards, as effective as...

29 CFR 1952.241 - Developmental schedule.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR..., Commissioner, Alaska Department of Labor, to James Lake, Regional Administrator for Occupational Safety and Health) follows: (a) Promulgation of occupational safety and health standards, as effective as...

29 CFR 1952.241 - Developmental schedule.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR..., Commissioner, Alaska Department of Labor, to James Lake, Regional Administrator for Occupational Safety and Health) follows: (a) Promulgation of occupational safety and health standards, as effective as...

29 CFR 1952.241 - Developmental schedule.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR..., Commissioner, Alaska Department of Labor, to James Lake, Regional Administrator for Occupational Safety and Health) follows: (a) Promulgation of occupational safety and health standards, as effective as...

76 FR 67478 - Bloodborne Pathogens Standard; Extension of the Office of Management and Budget's (OMB) Approval...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-01

... Pathogens Standard provide employers and workers with means to provide protection from adverse health... protection from the adverse health effects associated with occupational exposure to bloodborne pathogens. As... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2010-0047...

77 FR 61431 - Hexavalent Chromium Standards; Extension of the Office of Management and Budget's (OMB) Approval...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-09

... Construction (29 CFR 1926.1126) (the ``Standards'') protect workers from the adverse health effects that may... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2012-0034... Information Collection (Paperwork) Requirements AGENCY: Occupational Safety and Health Administration (OSHA...

29 CFR 1902.2 - General policies.

Code of Federal Regulations, 2010 CFR

2010-07-01

... health program with respect to covered issues that in his judgment meets or will meet the criteria set... State plan may cover any occupational safety and health issue with respect to which a Federal standard... State plan shall describe the occupational safety and health issue or issues and the State standard or...

29 CFR 1902.2 - General policies.

Code of Federal Regulations, 2011 CFR

2011-07-01

... health program with respect to covered issues that in his judgment meets or will meet the criteria set... State plan may cover any occupational safety and health issue with respect to which a Federal standard... State plan shall describe the occupational safety and health issue or issues and the State standard or...

40 CFR 312.23 - Interviews with past and present owners, operators, and occupants.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 27 2010-07-01 2010-07-01 false Interviews with past and present... LANDOWNERS, STANDARDS FOR CONDUCTING ALL APPROPRIATE INQUIRIES Standards and Practices § 312.23 Interviews with past and present owners, operators, and occupants. (a) Interviews with owners, operators, and...

41 CFR 102-74.30 - What standard in providing occupancy services must Executive agencies follow?

Code of Federal Regulations, 2010 CFR

2010-07-01

... and Property Management Federal Property Management Regulations System (Continued) FEDERAL MANAGEMENT REGULATION REAL PROPERTY 74-FACILITY MANAGEMENT Facility Management Occupancy Services § 102-74.30 What... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false What standard in...

Illinois Occupational Skill Standards: Agricultural Sales and Marketing Cluster.

ERIC Educational Resources Information Center

Illinois Occupational Skill Standards and Credentialing Council, Carbondale.

This document, which is intended to serve as a guide for work force preparation program providers, details the Illinois occupational skill standards for programs preparing students for employment in jobs in agricultural sales and marketing. Agency partners involved in this project include: the Illinois State Board of Education, Illinois Community…

Environmental and Agricultural Sciences. Georgia Core Standards for Occupational Clusters.

ERIC Educational Resources Information Center

Georgia Univ., Athens. Dept. of Occupational Studies.

This document lists core standards and occupational knowledge amd skills that have been identified/validated by industry as necessary to all Georgia students in secondary-level environmental and agricultural sciences programs. First, foundation skills are grouped as follows: basic skills (reading, writing, arithmetic/mathematics, listening,…

Business, Marketing, and Information Management. Georgia Core Standards for Occupational Clusters.

ERIC Educational Resources Information Center

Georgia Univ., Athens. Dept. of Occupational Studies.

This document lists core standards and occupational knowledge and skills that have been identified and validated by industry as necessary to all Georgia students in business, marketing, and information management programs. First, foundation skills are grouped as follows: basic skills (reading, writing, arithmetic/mathematics, listening, speaking);…

78 FR 21607 - National Institute for Occupational Safety and Health Partnership Opportunity on a Research...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-11

... Performance of Isolation Gowns AGENCY: National Institute for Occupational Safety and Health (NIOSH) of the...) International standards development to establish minimum performance requirements for isolation gowns for health... will be recognized as contributing to the establishment of the performance standard. Manufacturers...

Illinois Occupational Skill Standards: HVAC/R Technician Cluster.

ERIC Educational Resources Information Center

Illinois Occupational Skill Standards and Credentialing Council, Carbondale.

This document, which is intended to serve as a guide for work force preparation program providers, details the Illinois occupational skill standards for programs preparing students for employment in jobs in the heating, ventilation, air conditioning, and refrigeration (HVAC/R) industry. Agency partners involved in this project include: the…

76 FR 67225 - Agency Information Collection Activities; Submission for OMB Review; Comment Request; Standard on...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-31

... (DOL) is submitting the Occupational Safety and Health Administration (OSHA) sponsored information... Regulatory Affairs, Attn: OMB Desk Officer for the Department of Labor, Occupational Safety and Health... Health Administration (OSHA). Title of Collection: Standard on Slings. OMB Control Number: 1218-0223...

Illinois Occupational Skill Standards: Plastics Molding Cluster.

ERIC Educational Resources Information Center

Illinois Occupational Skill Standards and Credentialing Council, Carbondale.

This document, which is intended to serve as a guide for work force preparation program providers, details the Illinois occupational skill standards for programs preparing students for employment in jobs in the plastics molding industry. Agency partners involved in this project include: the Illinois State Board of Education, Illinois Community…

5 CFR 9901.332 - Standard and targeted local market supplements.

Code of Federal Regulations, 2010 CFR

2010-01-01

...) Standard local market supplements are not applicable to physicians and dentists (in occupational series... dentists paid under 38 U.S.C. chapter 74 and since their adjusted salary rates apply on a worldwide basis...) Except for physicians and dentists (in occupational series 0602 and 0680, respectively) or as otherwise...

5 CFR 9901.332 - Standard and targeted local market supplements.

Code of Federal Regulations, 2011 CFR

2011-01-01

...) Standard local market supplements are not applicable to physicians and dentists (in occupational series... dentists paid under 38 U.S.C. chapter 74 and since their adjusted salary rates apply on a worldwide basis...) Except for physicians and dentists (in occupational series 0602 and 0680, respectively) or as otherwise...

Construction Occupations--Finishing. Reprinted from the Occupational Outlook Handbook, 1978-79 Edition.

ERIC Educational Resources Information Center

Bureau of Labor Statistics (DOL), Washington, DC.

Focusing on finishing construction occupations, this document is one in a series of forty-one reprints from the Occupational Outlook Handbook providing current information and employment projections for individual occupations and industries through 1985. The specific occupations covered in this document include air…

[Current status of occupational health and related countermeasures in Guangzhou, China].

PubMed

Zeng, W F; Wu, S H; Wang, Z; Liu, Y M

2016-02-20

To investigate the current status of occupational health and related countermeasures in Guangzhou, China. Related data were collected from occupational poisoning accident investigation, diagnosis and identification of occupational diseases, and the occupational disease hazard reporting system, and the statistical data of occupational health in Guangzhou were analyzed retrospectively. The number of enterprises reporting for occupational disease hazards in Guangzhou was 20 890, and the total number of workers was 1 457 583. The number of workers exposed to occupational hazards was 284 233, and the cumulative number of workers with occupational diseases was 1 502. There were many risk factors for occupational diseases in enterprises, and there were a large number of workers with occupational diseases, as well as newly diagnosed cases. From 2001 to 2014, the total number of cases of occupational diseases was 958. The situation for the prevention and control of occupational diseases is grim in Guangzhou. Occupational health supervision and law enforcement should be enhanced, the three-level supervision system should be established and perfected, and the occupational health supervision system with a combination of "prevention, treatment, and protection" should be established and promoted, so as to gradually establish a technical service support system for occupational health.

Standards for Agricultural Occupations Programs in Illinois Community Colleges. Interim Report of the Community College Phase [Phase I] of Project RD1-A8-564 Entitled "Standards for Illinois ABAO Post-Secondary Programs and Secondary Programs in Cook County".

ERIC Educational Resources Information Center

Walker, Robert W.; Hemp, Paul E.

A study was made of Phase 1 of the long-term standards program for agricultural occupations programs for Illinois community colleges. The unique feature of this project was the procedure used to maximize the input of community college teachers in the validation and revision of the national standards. Survey instruments were sent to community…

How safe are federal regulations on occupational alcohol use?

PubMed

Howland, Jonathan; Almeida, Alissa; Rohsenow, Damaris; Minsky, Sara; Greece, Jacey

2006-01-01

Current US federal regulations on occupational alcohol use for safety-sensitive jobs do not account for impairment from low doses of alcohol and next day effects of heavy drinking. Research on the effects of low doses of alcohol on neurocognitive and simulated occupational tasks suggests that the current per se level of these regulations is set too high. Research on the effects of heavy drinking on next-day neurocognitive and simulated occupational performance is mixed and suggests that further research is needed to determine the safety of current "bottle-to-throttle" times. Although low-dose and residual drinking effects may pose low relative risk for occupational error, the aggregate contribution of these exposures to workplace problems may be substantial, given the number of people exposed.

Engineering and Related Occupations. Reprinted from the Occupational Outlook Handbook, 1978-79 Edition.

ERIC Educational Resources Information Center

Bureau of Labor Statistics (DOL), Washington, DC.

Focusing on engineering and related occupations, this document is one in a series of forty-one reprints from the Occupational Outlook Handbook providing current information and employment projections for individual occupations and industries through 1985. The specific occupations covered in this document include aerospace engineers, agricultural…

Business Occupations. Reprinted from the Occupational Outlook Handbook, 1978-79 Edition.

ERIC Educational Resources Information Center

Bureau of Labor Statistics (DOL), Washington, DC.

Focusing on business occupations, this document is one in a series of forty-one reprints from the Occupational Outlook Handbook providing current information and employment projections for individual occupations and industries through 1985. The specific occupations covered in this document include accountants, advertising workers, collections…

Factory Production Occupations. Reprinted from the Occupational Outlook Handbook, 1978-79 Edition.

ERIC Educational Resources Information Center

Bureau of Labor Statistics (DOL), Washington, DC.

Focusing on factory production occupations, this document is one in a series of forty-one reprints from the Occupational Outlook Handbook providing current information and employment projections for individual occupations and industries through 1985. The specific occupations covered in this document include assemblers, blue collar worker…

Service Occupations. Reprinted from the Occupational Outlook Handbook, 1978-79 Edition.

ERIC Educational Resources Information Center

Bureau of Labor Statistics (DOL), Washington, DC.

Focusing on service occupations, this document is one in a series of forty-one reprints from the Occupational Outlook Handbook providng current information and employment projections for individual occupations and industries through 1985. The specific occupations covered in this document include building custodians, pest controllers, private…

Sales Occupations. Reprinted from the Occupational Outlook Handbook, 1978-79 Edition.

ERIC Educational Resources Information Center

Bureau of Labor Statistics (DOL), Washington, DC.

Focusing on sales occupations, this document is one in a series of forty-one reprints from the Occupational Outlook Handbook providing current information and employment projections for individual occupations and industries through 1985. The specific occupations covered in this document include automobile sales workers, buyers, insurance…

Small Business Occupations. Reprinted from the Occupational Outlook Handbook, 1978-79 Edition.

ERIC Educational Resources Information Center

Bureau of Labor Statistics (DOL), Washington, DC.

Focusing on small business occupations, this document is one in a series of forty-one reprints from the Occupational Outlook Handbook providing current information and employment projections for individual occupations and industries through 1985. The specific occupations covered in this document include barbers, cosmetologists, funeral…

Mathematics and Related Occupations. Reprinted from the Occupational Outlook Handbook, 1978-79 Edition.

ERIC Educational Resources Information Center

Bureau of Labor Statistics (DOL), Washington, DC.

Focusing on mathematics and related occupations, this document is one in a series of forty-one reprints from the Occupational Outlook Handbook providing current information and employment projections for individual occupations and industries through 1985. The specific occupations covered in this document include accountants, actuaries,…

Driving Occupations. Reprinted from the Occupational Outlook Handbook, 1978-79 Edition.

ERIC Educational Resources Information Center

Bureau of Labor Statistics (DOL), Washington, DC.

Focusing on driving occupations, this document is one in a series of forty-one reprints from the Occupational Outlook Handbook providing current information and employment projections for individual occupations and industries through 1985. The specific occupations covered in this document include intercity busdrivers, local transit busdrivers,…

Compensation for occupational neurological and mental disorders.

PubMed

Kang, Dong-Mug; Kim, Inah

2014-06-01

Standards for the recognition of occupational diseases (ODs) in Korea were established in 1954 and have been amended several times. In 2013, there was a significant change in these standards. On the basis of scientific evidence and causality, the International Labour Organization list, European Commission schedule, and compensated cases in Korea were reviewed to revise the previous standards for the recognition of ODs in Korea. A disease-based approach using the International Classification of Diseases (10th version) was added on the previous standards, which were agent-specific approaches. The amended compensable occupational neurological disorders and occupational mental disorders (OMDs) in Korea are acute and chronic central nervous system (CNS) disorders, toxic neuropathy, peripheral neuropathy, manganese-related disorders, and post-traumatic stress disorder. Several agents including trichloroethylene (TCE), benzene, vinyl chloride, organotin, methyl bromide, and carbon monoxide (CO) were newly included as acute CNS disorders. TCE, lead, and mercury were newly included as chronic CNS disorders. Mercury, TCE, methyl n-butyl ketone, acrylamide, and arsenic were newly included in peripheral neuropathy. Post-traumatic stress disorders were newly included as the first OMD. This amendment makes the standard more comprehensive and practical. However, this amendment does not perfectly reflect the recent scientific progress and social concerns. Ongoing effort, research, and expert consensus are needed to improve the standard.

The OSHA hazardous chemical occupational exposure standard for laboratories.

PubMed

Armbruster, D A

1991-01-01

OSHA's chemical occupational exposure standard for laboratories is an outgrowth of the previously issued Hazard Communication Standard. The standard relieves laboratories from complying with general industry standards but does require compliance with specific laboratory guidelines. The heart of the standard is the creation of a Chemical Hygiene Plan (CHP). The CHP addresses major issues such as safety equipment and procedures, work practices, training, the designation of a chemical hygiene officer, and the provision of medical consultation and examination for affected employees. This new standard, in full effect as of January 31, 1991, presents yet another regulatory challenge to laboratory managers but also ensures a safer environment for laboratory workers.

Business Management Occupations: Skill Standards.

ERIC Educational Resources Information Center

Vocational Technical Education Consortium of States, Decatur, GA.

This report organizes the information provided by 77 individuals in business management occupations in 12 states into skills inventories for persons in these jobs. The skills inventories contain the following sections: (1) occupation-specific knowledge (communication, mathematics, science); (2) workplace behaviors (work ethics, interpersonal…

77 FR 62433 - Hazard Communication Standard; Approval of Information Collection Requirements

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-15

... Information Collection Requirements AGENCY: Occupational Safety and Health Administration (OSHA), Labor... collection requirements. SUMMARY: The Occupational Safety and Health Administration (OSHA) is announcing that... DEPARTMENT OF LABOR Occupational Safety and Health Administration 29 CFR Parts 1910, 1915, and...

29 CFR 1952.295 - Level of Federal enforcement.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION... regard to occupational safety and health issues covered by the Nevada plan. OSHA retains full authority... directed to any private sector maritime activities (occupational safety and health standards comparable to...

29 CFR 1952.295 - Level of Federal enforcement.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION... regard to occupational safety and health issues covered by the Nevada plan. OSHA retains full authority... directed to any private sector maritime activities (occupational safety and health standards comparable to...

Business Financial Occupations: Skill Standards.

ERIC Educational Resources Information Center

Vocational Technical Education Consortium of States, Decatur, GA.

This report organizes the information provided by 71 individuals in finance-related occupations in 11 states into skills inventories for persons in these jobs. The skills inventories contain the following sections: (1) occupation-specific knowledge (communication, mathematics, science); (2) workplace behaviors (work ethics, interpersonal…

Task Analysis for Health Occupations. Cluster: Nursing. Occupation: Professional Nurse (Associate Degree). Education for Employment Task Lists.

ERIC Educational Resources Information Center

Lake County Area Vocational Center, Grayslake, IL.

This document contains a task analysis for health occupations (professional nurse) in the nursing cluster. For each task listed, occupation, duty area, performance standard, steps, knowledge, attitudes, safety, equipment/supplies, source of analysis, and Illinois state goals for learning are listed. For the duty area of "providing therapeutic…

Task Analysis for Health Occupations. Cluster: Nursing. Occupation: Home Health Aide. Education for Employment Task Lists.

ERIC Educational Resources Information Center

Lake County Area Vocational Center, Grayslake, IL.

This document contains a task analysis for health occupations (home health aid) in the nursing cluster. For each task listed, occupation, duty area, performance standard, steps, knowledge, attitudes, safety, equipment/supplies, source of analysis, and Illinois state goals for learning are listed. For the duty area of "providing therapeutic…

Evaluation of Mid-Size Male Hybrid III Models for use in Spaceflight Occupant Protection Analysis

NASA Technical Reports Server (NTRS)

Putnam, J.; Somers, J.; Wells, J.; Newby, N.; Currie-Gregg, N.; Lawrence, C.

2016-01-01

Introduction: In an effort to improve occupant safety during dynamic phases of spaceflight, the National Aeronautics and Space Administration (NASA) has worked to develop occupant protection standards for future crewed spacecraft. One key aspect of these standards is the identification of injury mechanisms through anthropometric test devices (ATDs). Within this analysis, both physical and computational ATD evaluations are required to reasonably encompass the vast range of loading conditions any spaceflight crew may encounter. In this study the accuracy of publically available mid-size male HIII ATD finite element (FE) models are evaluated within applicable loading conditions against extensive sled testing performed on their physical counterparts. Methods: A series of sled tests were performed at the Wright Patterson Air force Base (WPAFB) employing variations of magnitude, duration, and impact direction to encompass the dynamic loading range for expected spaceflight. FE simulations were developed to the specifications of the test setup and driven using measured acceleration profiles. Both fast and detailed FE models of the mid-size male HIII were ran to quantify differences in their accuracy and thus assess the applicability of each within this field. Results: Preliminary results identify the dependence of model accuracy on loading direction, magnitude, and rate. Additionally the accuracy of individual response metrics are shown to vary across each model within evaluated test conditions. Causes for model inaccuracy are identified based on the observed relationships. Discussion: Computational modeling provides an essential component to ATD injury metric evaluation used to ensure the safety of future spaceflight occupants. The assessment of current ATD models lays the groundwork for how these models can be used appropriately in the future. Identification of limitations and possible paths for improvement aid in the development of these effective analysis tools.

Evaluation of Mid-Size Male Hybrid III Models for use in Spaceflight Occupant Protection Analysis

NASA Technical Reports Server (NTRS)

Putnam, Jacob B.; Sommers, Jeffrey T.; Wells, Jessica A.; Newby, Nathaniel J.; Currie-Gregg, Nancy J.; Lawrence, Chuck

2016-01-01

In an effort to improve occupant safety during dynamic phases of spaceflight, the National Aeronautics and Space Administration (NASA) has worked to develop occupant protection standards for future crewed spacecraft. One key aspect of these standards is the identification of injury mechanisms through anthropometric test devices (ATDs). Within this analysis, both physical and computational ATD evaluations are required to reasonably encompass the vast range of loading conditions any spaceflight crew may encounter. In this study the accuracy of publically available mid-size male HIII ATD finite element (FE) models are evaluated within applicable loading conditions against extensive sled testing performed on their physical counterparts. Methods: A series of sled tests were performed at the Wright Patterson Air force Base (WPAFB) employing variations of magnitude, duration, and impact direction to encompass the dynamic loading range for expected spaceflight. FE simulations were developed to the specifications of the test setup and driven using measured acceleration profiles. Both fast and detailed FE models of the mid-size male HIII were ran to quantify differences in their accuracy and thus assess the applicability of each within this field. Results: Preliminary results identify the dependence of model accuracy on loading direction, magnitude, and rate. Additionally the accuracy of individual response metrics are shown to vary across each model within evaluated test conditions. Causes for model inaccuracy are identified based on the observed relationships. Discussion: Computational modeling provides an essential component to ATD injury metric evaluation used to ensure the safety of future spaceflight occupants. The assessment of current ATD models lays the groundwork for how these models can be used appropriately in the future. Identification of limitations and possible paths for improvement aid in the development of these effective analysis tools.

Current employment status, occupational category, occupational hazard exposure, and job stress in relation to telomere length: The Multiethnic Study of Atherosclerosis (MESA)

PubMed Central

Fujishiro, Kaori; Diez-Roux, Ana V; Landsbergis, Paul; Jenny, Nancy Swords; Seeman, Teresa

2014-01-01

Objective Telomere length has been proposed as a biomarker of cell senescence, which is associated with a wide array of adverse health outcomes. While work is a major determinant of health, few studies have investigated the association of telomere length with various dimensions of occupation. Accelerated cellular aging could be a common pathway linking occupational exposure to several health outcomes. Methods Leukocyte telomere length was assessed using quantitative polymerase chain reaction (Q-PCR) in a community-based sample of 981 individuals (age: 45–84 years old). Questionnaires were used to collect information on current employment status, current or main occupation before retirement, and job strain. The O*NET (Occupational Resource Network) database was linked to the questionnaire data to create 5 exposure measures: physical activity on the job, physical hazard exposure, interpersonal stressors, job control, and job demands. Linear regression was used to estimate associations of occupational characteristics with telomere lengths after adjustment for age, sex, race, socioeconomic position, and several behavioral risk factors. Results There were no mean differences in telomere lengths across current employment status, occupational category, job strain categories or levels of most O*NET exposure measures. There was also no evidence that being in lower status occupational categories or being exposed to higher levels of adverse physical or psychosocial exposures accelerated the association between age and telomere shortening. Conclusions Cellular aging as reflected by shorter telomeres does not appear to be an important pathway linking occupation to various health outcomes. PMID:23686115

Occupational therapy students' contribution to occasions of service during practice placements in health settings.

PubMed

Rodger, Sylvia; Stephens, Elizabeth; Clark, Michele; Ash, Susan; Graves, Nicholas

2011-12-01

Currently in the Australian higher education sector, the productivity benefits of occupational therapy clinical education placements are a contested issue. This article will report results of a study that developed a methodology for documenting time use during placements and investigated the productivity changes associated with occupational therapy clinical education placements in Queensland, Australia. Supervisors' and students' time use during placements and how this changed for supervisors compared to pre- and post-placement is also presented. Using a cohort survey design, participants were students from two Queensland universities, and their supervisors employed by Queensland Health. Time use was recorded in 30 minute blocks according to particular categories. There was a significant increase in supervisors' time spent in patient care activities (F = 94.011(2,12.37 df) , P < 0.001) between pre- and during placement (P < 0.001) and decrease between during and post-placement (P < 0.001). Supervisors' time spent in all non-patient care activities was also significant (F = 4.580(2,16 df) , P = 0.027) increasing between pre- and during placement (P = 0.028). There was a significant decrease in supervisors' time spent in placement activities (F = 5.133(2,19.18 df) , P = 0.016) from during to post-placement. Students spent more time than supervisors in patient care activities while on placement. A novel method for reporting productivity and time-use changes during clinical education programs for occupational therapy has been applied. Supervisors spent considerable time in assessing and managing students and their clinical education role should be seen as core business in standard occupational therapy practice. This paper will contribute to future assessments of the economic impact of student placements for allied health disciplines. © 2011 The Authors. Australian Occupational Therapy Journal © 2011 Occupational Therapy Australia.

Is it time to reassess current safety standards for glyphosate-based herbicides?

PubMed

Vandenberg, Laura N; Blumberg, Bruce; Antoniou, Michael N; Benbrook, Charles M; Carroll, Lynn; Colborn, Theo; Everett, Lorne G; Hansen, Michael; Landrigan, Philip J; Lanphear, Bruce P; Mesnage, Robin; Vom Saal, Frederick S; Welshons, Wade V; Myers, John Peterson

2017-06-01

Use of glyphosate-based herbicides (GBHs) increased ∼100-fold from 1974 to 2014. Additional increases are expected due to widespread emergence of glyphosate-resistant weeds, increased application of GBHs, and preharvest uses of GBHs as desiccants. Current safety assessments rely heavily on studies conducted over 30 years ago. We have considered information on GBH use, exposures, mechanisms of action, toxicity and epidemiology. Human exposures to glyphosate are rising, and a number of in vitro and in vivo studies challenge the basis for the current safety assessment of glyphosate and GBHs. We conclude that current safety standards for GBHs are outdated and may fail to protect public health or the environment. To improve safety standards, the following are urgently needed: (1) human biomonitoring for glyphosate and its metabolites; (2) prioritisation of glyphosate and GBHs for hazard assessments, including toxicological studies that use state-of-the-art approaches; (3) epidemiological studies, especially of occupationally exposed agricultural workers, pregnant women and their children and (4) evaluations of GBHs in commercially used formulations, recognising that herbicide mixtures likely have effects that are not predicted by studying glyphosate alone. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Job and industry classifications associated with sarcoidosis in A Case-Control Etiologic Study of Sarcoidosis (ACCESS).

PubMed

Barnard, Juliana; Rose, Cecile; Newman, Lee; Canner, Martha; Martyny, John; McCammon, Chuck; Bresnitz, Eddy; Rossman, Milt; Thompson, Bruce; Rybicki, Benjamin; Weinberger, Steven E; Moller, David R; McLennan, Geoffrey; Hunninghake, Gary; DePalo, Louis; Baughman, Robert P; Iannuzzi, Michael C; Judson, Marc A; Knatterud, Genell L; Teirstein, Alvin S; Yeager, Henry; Johns, Carol J; Rabin, David L; Cherniack, Reuben

2005-03-01

To determine whether specific occupations and industries may be associated with sarcoidosis. A Case Control Etiologic Study of Sarcoidosis (ACCESS) obtained occupational and environmental histories on 706 newly diagnosed sarcoidosis cases and matched controls. We used Standard Industrial Classification (SIC) and Standard Occupational Classification (SOC) to assess occupational contributions to sarcoidosis risk. Univariable analysis identified elevated risk of sarcoidosis for workers with industrial organic dust exposures, especially in Caucasian workers. Workers for suppliers of building materials, hardware, and gardening materials were at an increased risk of sarcoidosis as were educators. Work providing childcare was negatively associated with sarcoidosis risk. Jobs with metal dust or metal fume exposures were negatively associated with sarcoidosis risk, especially in Caucasian workers. In this study, we found that exposures in particular occupational settings may contribute to sarcoidosis risk.

"Competence" and Occupational Standards: Observations from Six European Countries

ERIC Educational Resources Information Center

Lester, Stan; Religa, Jolanta

2017-01-01

Purpose: The purpose of this paper is to review the use of "competence" as a concept and through the use of occupational competence standards in six European countries. Design/methodology/approach: Partners in an Erasmus+ project in each of the six countries prepared a review of the use of "competence" in their countries using…

Career Development and Occupational Studies: A Supplement to the Adult Education Resource Guide and Learning Standards.

ERIC Educational Resources Information Center

Peavey, Kay S.; Krieger, Alan

This publication focuses on New York's learning standards for career development and occupational studies (CDOS) in adult education: career development, integrated learning, universal foundation skills, and career majors. A section on the adult learner provides information on engaging learners to increase motivation. The next section focuses on…

Development of Entry-Level Competence Tests: A Strategy for Evaluation of Vocational Education Training Systems

ERIC Educational Resources Information Center

Schutte, Marc; Spottl, Georg

2011-01-01

Developing countries such as Malaysia and Oman have recently established occupational standards based on core work processes (functional clusters of work objects, activities and performance requirements), to which competencies (performance determinants) can be linked. While the development of work-process-based occupational standards is supposed…

A Guide for Using Illinois Standards for Quality Agriculture Programs in Community Colleges.

ERIC Educational Resources Information Center

Illinois Univ., Urbana. Dept. of Vocational and Technical Education.

As a result of a project to prepare standards for agricultural occupations programs in Illinois community colleges, this guide was developed to assist local community college instructors, administrators, and other local persons in the evaluation of local agricultural occupations programs. The first section of the guide explains (how standards…

From the Analysis of Work-Processes to Designing Competence-Based Occupational Standards and Vocational Curricula

ERIC Educational Resources Information Center

Tutlys, Vidmantas; Spöttl, Georg

2017-01-01

Purpose: This paper aims to explore methodological and institutional challenges on application of the work-process analysis approach in the design and development of competence-based occupational standards for Lithuania. Design/methodology/approach: The theoretical analysis is based on the review of scientific literature and the analysis of…

29 CFR 1910.98 - Effective dates.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 5 2014-07-01 2014-07-01 false Effective dates. 1910.98 Section 1910.98 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS Occupational Health and Environmental Control § 1910.98 Effective...

29 CFR 1910.98 - Effective dates.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 29 Labor 5 2012-07-01 2012-07-01 false Effective dates. 1910.98 Section 1910.98 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS Occupational Health and Environmental Control § 1910.98 Effective...

29 CFR 1910.98 - Effective dates.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 5 2011-07-01 2011-07-01 false Effective dates. 1910.98 Section 1910.98 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS Occupational Health and Environmental Control § 1910.98 Effective...

29 CFR 1910.98 - Effective dates.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 29 Labor 5 2013-07-01 2013-07-01 false Effective dates. 1910.98 Section 1910.98 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS Occupational Health and Environmental Control § 1910.98 Effective...

29 CFR 1952.155 - Level of Federal enforcement.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION... with regard to occupational safety and health issues covered by the North Carolina plan. OSHA retains..., 1996, occupational safety and health standards which have been promulgated under section 6 of the Act...

29 CFR 1952.155 - Level of Federal enforcement.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION... with regard to occupational safety and health issues covered by the North Carolina plan. OSHA retains..., 1996, occupational safety and health standards which have been promulgated under section 6 of the Act...

29 CFR 1912.44 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... occupational safety and health standards under the Act. (ii) The term also includes the Advisory Committee on... Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED... context clearly requires otherwise: (a) Act means the Williams-Steiger Occupational Safety and Health Act...

29 CFR 1912.44 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... occupational safety and health standards under the Act. (ii) The term also includes the Advisory Committee on... Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED... context clearly requires otherwise: (a) Act means the Williams-Steiger Occupational Safety and Health Act...

29 CFR 1910.98 - Effective dates.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 5 2010-07-01 2010-07-01 false Effective dates. 1910.98 Section 1910.98 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS Occupational Health and Environmental Control § 1910.98 Effective...

Epoxy-based production of wind turbine rotor blades: occupational contact allergies.

PubMed

Pontén, Ann; Carstensen, Ole; Rasmussen, Kurt; Gruvberger, Birgitta; Isaksson, Marléne; Bruze, Magnus

2004-03-01

An industry producing rotor blades for wind turbines with an epoxy-based technology had experienced an increasing number of workers with dermatitis, among whom the frequency of occupational contact allergy (OCA) was suspected to be underestimated. To investigate the frequency of OCA by patch-testing with a specially profiled occupational patch test series. In a blinded study design, 603 workers were first interviewed and thereafter clinically examined. Based on a history of work-related skin disease, clinical findings of dermatitis, or both, 325 (53.9%) of the workers were patch-tested with an occupational patch test series and the European Standard patch test series. Of the 603 investigated workers, 10.9% had OCA and 5.6% had contact allergy to epoxy resin in the standard test series. Contact allergy to amine hardeners/catalysts was found in 4.1% of the workers. Among the workers with OCA, 48.5% reacted to work material other than epoxy resin in the European Standard patch test series. Approximately 50% of the workers with OCA would not have been detected if only the European Standard patch test series had been used.

Food Merchandising Occupations. Reprinted from the Occupational Outlook Handbook, 1978-79 Edition.

ERIC Educational Resources Information Center

Bureau of Labor Statistics (DOL), Washington, DC.

Focusing on food merchandising occupations, this document is one in a series of forty-one reprints from the Occupational Outlook Handbook providing current information and employment projections for individual occupations and industries through 1985. The specific occupations covered in this document include bartenders, cooks and chefs, dining room…

Environmental Scientists and Conservation Occupations. Reprinted from the Occupational Outlook Handbook, 1978-79 Edition.

ERIC Educational Resources Information Center

Bureau of Labor Statistics (DOL), Washington, DC.

Focusing on environmental scientists and conservation occupations, this document is one in a series of forty-one reprints from the Occupational Outlook Handbook providing current information and employment projections for individual occupations and industries through 1985. The specific occupations covered in this document include foresters,…

Energy-Producing Industries. Reprinted from the Occupational Outlook Handbook, 1978-79 Edition.

ERIC Educational Resources Information Center

Bureau of Labor Statistics (DOL), Washington, DC.

Focusing on occupations in energy-producing industries, this document is one in a series of forty-one reprints from the Occupational Outlook Handbook providing current information and employment projections for individual occupations and industries through 1985. The specific occupations covered in this document include coal mining, occupations in…

Air and Water Transportation Occupations. Reprinted from the Occupational Outlook Handbook, 1978-79 Edition.

ERIC Educational Resources Information Center

Bureau of Labor Statistics (DOL), Washington, DC.

Focusing on air and water transportation occupations, this document is one in a series of forty-one reprints from the Occupational Outlook Handbook providing current information and employment projections for individual occupations and industries through 1985. The specific occupations covered in this document include civil aviation workers, air…

Banking and Insurance Occupations. Reprinted from the Occupational Outlook Handbook, 1978-79 Edition.

ERIC Educational Resources Information Center

Bureau of Labor Statistics (DOL), Washington, DC.

Focusing on banking and insurance occupations, this document is one in a series of forty-one reprints from the Occupational Outlook Handbook providing current information and employment projections for individual occupations and industries through 1985. The specific occupations covered in this document include bank clerks, bank officers/managers,…

Office Machine and Computer Occupations. Reprinted from the Occupational Outlook Handbook, 1978-79 Edition.

ERIC Educational Resources Information Center

Bureau of Labor Statistics (DOL), Washington, DC.

Focusing on office machine and computer occupations, this document is one in a series of forty-one reprints from the Occupational Outlook Handbook providing current information and employment projections for individual occupations and industries through 1985. The specific occupations covered in this document include business machine repairers,…

SURVEY OF CURRENTLY EMPLOYED NURSE AIDES IN CHICAGO.

ERIC Educational Resources Information Center

Chicago Board of Education, IL. Dept. of Vocational and Practical Arts Education.

THE PURPOSES OF A DEMONSTRATION PROGRAM IN HEALTH OCCUPATIONS WERE TO SET UP AN ADVISORY COMMITTEE TO DETERMINE SPECIFIC OCCUPATIONS TO BE GIVEN PRIORITY FOR TRAINING, TO CONDUCT A TESTING PROGRAM AMONG CURRENT WORKERS IN THE HEALTH OCCUPATIONS, AND TO CONDUCT A RECRUITMENT PROGRAM. THE ADVISORY COMMITTEE RECOMMENDED THAT AN EDUCATIONAL PROGRAM BE…

U.K. standards of care for occupational contact dermatitis and occupational contact urticaria

PubMed Central

Adisesh, A; Robinson, E; Nicholson, PJ; Sen, D; Wilkinson, M

2013-01-01

The diagnosis of occupational contact dermatitis (OCD) and occupational contact urticaria (OCU) is a process that involves fastidious clinical and occupational history taking, clinical examination, patch testing and skin-prick testing. A temporal relationship of work and/or the presence of a rash on the hands only raises suspicion of an occupational cause, and does not necessarily confirm an occupational causation. The identification of allergy by patch or prick tests is a major objective, as exclusion of an offending allergen from the environment can contribute to clinical recovery in the individual worker and avoidance of new cases of disease. This can be a complex process where allergens and irritants, and therefore allergic and irritant contact dermatitis, may coexist. This article provides guidance to healthcare professionals dealing with workers exposed to agents that potentially cause OCD and OCU. Specifically it aims to summarize the 2010 British Occupational Health Research Foundation (BOHRF) systematic review, and also to help practitioners translate the BOHRF guideline into clinical practice. As such, it aims to be of value to physicians and nurses based in primary and secondary care, as well as occupational health and public health clinicians. It is hoped that it will also be of value to employers, interested workers and those with responsibility for workplace standards, such as health and safety representatives. Note that it is not intended, nor should it be taken to imply, that these standards of care override existing statutory and legal obligations. Duties under the U.K. Health and Safety at Work Act 1974, the Management of Health and Safety at Work Regulations 1999, the Control of Substances Hazardous to Health Regulations 2002, the Equality Act 2010 and other relevant legislation and guidance must be given due consideration, as should laws relevant to other countries. PMID:23374107

Everyday uses of standardized test information in a geriatric setting: a qualitative study exploring occupational therapist and physiotherapist test administrators' justifications.

PubMed

Krohne, Kariann; Torres, Sandra; Slettebø, Åshild; Bergland, Astrid

2014-02-17

Health professionals are required to collect data from standardized tests when assessing older patients' functional ability. Such data provide quantifiable documentation on health outcomes. Little is known, however, about how physiotherapists and occupational therapists who administer standardized tests use test information in their daily clinical work. This article aims to investigate how test administrators in a geriatric setting justify the everyday use of standardized test information. Qualitative study of physiotherapists and occupational therapists on two geriatric hospital wards in Norway that routinely tested their patients with standardized tests. Data draw on seven months of fieldwork, semi-structured interviews with eight physiotherapists and six occupational therapists (12 female, two male), as well as observations of 26 test situations. Data were analyzed using Systematic Text Condensation. We identified two test information components in everyday use among physiotherapist and occupational therapist test administrators. While the primary component drew on the test administrators' subjective observations during testing, the secondary component encompassed the communication of objective test results and test performance. The results of this study illustrate the overlap between objective and subjective data in everyday practice. In clinical practice, by way of the clinicians' gaze on how the patient functions, the subjective and objective components of test information are merged, allowing individual characteristics to be noticed and made relevant as test performance justifications and as rationales in the overall communication of patient needs.

Occupational Injury Prevention Research in NIOSH

PubMed Central

Stout, Nancy

2010-01-01

This paper provided a brief summary of the current strategic goals, activities, and impacts of the NIOSH (National Institute for Occupational Safety and Health) occupational injury research program. Three primary drivers (injury database, stakeholder input, and staff capacity) were used to define NIOSH research focuses to maximize relevance and impact of the NIOSH injury-prevention-research program. Injury data, strategic goals, program activities, and research impacts were presented with a focus on prevention of four leading causes of workplace injury and death in the US: motor vehicle incidents, falls, workplace violence, and machine and industrial vehicle incidents. This paper showcased selected priority goals, activities, and impacts of the NIOSH injury prevention program. The NIOSH contribution to the overall decrease in fatalities and injuries is reinforced by decreases in specific goal areas. There were also many intermediate outcomes that are on a direct path to preventing injuries, such as new safety regulations and standards, safer technology and products, and improved worker safety training. The outcomes serve as an excellent foundation to stimulate further research and worldwide partnership to address global workplace injury problems. PMID:22953170

Evaluation of phosphine genotoxicity at occupational levels of exposure in New South Wales, Australia.

PubMed Central

Barbosa, A; Bonin, A M

1994-01-01

Phosphine has been claimed to cause chromosomal damage at exposures close to the current time weighted average exposure standard of 0.3 ppm (0.4 mg/m3). The current study involved 31 phosphine fumigators and 21 controls during the high fumigation season. All were volunteers and were evaluated for genotoxicity variables, including micronuclei in peripheral blood lymphocytes and urine mutagenicity. In parallel, all fumigators and 17 controls were evaluated for full haematology, multiple biochemical analysis, whole blood organochlorines, and whole blood and serum cholinesterase activity. The results for micronuclei showed no significant differences between fumigators and controls, but detected a strong association between age and increased frequency of micronuclei. Measurement of urine mutagenicity did not show any significant difference between fumigators and controls, but did show increased excretion of mutagens in smokers. All haematological and biochemical variables were within normal ranges, except for some non-specific changes in biochemistry. At monitored occupational exposures of < 2.4 ppm/h our results show no association between phosphine exposure and genotoxic or toxicological effects in fumigators. PMID:8000496

Occupational injury and illness recording and reporting requirements--NAICS update and reporting revisions. Final rule.

PubMed

2014-09-18

OSHA is issuing a final rule to update the appendix to its Injury and Illness Recording and Reporting regulation. The appendix contains a list of industries that are partially exempt from requirements to keep records of work-related injuries and illnesses due to relatively low occupational injury and illness rates. The updated appendix is based on more recent injury and illness data and lists industry groups classified by the North American Industry Classification System (NAICS). The current appendix lists industries classified by Standard Industrial Classification (SIC). The final rule also revises the requirements for reporting work-related fatality, injury, and illness information to OSHA. The current regulation requires employers to report work-related fatalities and in-patient hospitalizations of three or more employees within eight hours of the event. The final rule retains the requirement for employers to report work-related fatalities to OSHA within eight hours of the event but amends the regulation to require employers to report all work-related in-patient hospitalizations, as well as amputations and losses of an eye, to OSHA within 24 hours of the event.

The risk of occupational injury increased according to severity of noise exposure after controlling for occupational environment status in Korea.

PubMed

Yoon, Jin-Ha; Roh, Jaehoon; Kim, Chi-Nyon; Won, Jong-Uk

2016-01-01

The aim of this study was to examine the relationship between noise exposure and risk of occupational injury. Korean National Health and Nutrition Examination Survey was used for the current study. Self-report questionnaires were used to investigate occupational injury and exposure to noise, chemicals, and machines and equipments. In separate analyses for occupation and occupational hazard, the proportion of occupational injuries increased according to severity of noise exposure (all P < 0.05). Compared to the non-exposure group, the respective odds ratio (95% confidence intervals) for occupational injury was 1.39 (1.07-1.80) and 1.67 (1.13-2.46) in the mild and severe noise exposure groups, after controlling for age, gender, sleep hours, work schedule (shift work), and exposure status to hazardous chemicals and hazardous machines and equipments. The current study highlights the association between noise exposure and risk of occupational injury. Furthermore, risk of occupational injury increased according to severity of noise exposure.

United States Air Force Hearing Conservation Program, Annual Report for Calendar Year 2016

DTIC Science & Technology

Program (HCP) section prepares an annual status report on the USAF HCP in accordance with Air Force Instruction 48-127, Occupational Noise and Hearing...Conservation Program, Section 2.9.2.17, and Department of Defense Instruction 6055.12, Hearing Conservation Program. This report covers calendar year...covers information regarding software implementation status, HCP effectiveness metrics, to include an overview of a few standard reports currently available in the DOEHRS-HC DR database, and our recommendations.

[Risk to employees in garbage collection and transport from pathogen exposure].

PubMed

Becker, G; Mathys, W; Neumann, H D; Allmers, H; Balfanz, J

1999-01-01

In a current study funded by the Federal Institute of Occupational Safety and Hygiene the microbial exposure during waste collection and the health of waste collectors are being examined. The investigation of the exposure is carried out in standard experiments and in field studies. It should give information about the extent of emissions of bacteria and fungi spores und confounding factors. Medical examinations of waste collectors will show if there are special health risks attributable to waste collection.

Analysis of Workplace Health Education Performed by Occupational Health Managers in Korea.

PubMed

Kim, Yeon-Ha; Jung, Moon-Hee

2016-09-01

To evaluate workplace health education as practiced by occupational health managers based on standardized job tasks and suggest priority tasks and areas to be trained. The study was conducted between November 10, 2013 and April 30, 2014. The tool used in this study was standardized job tasks of workplace health education for occupational health managers which was developed through methodological steps. It was evaluated by 233 worksite occupational health managers. Data were analyzed using SPSS 21.0. Predicting variables of workplace health education performance were the "analysis and planning" factor, type of enterprise, and form of management. Healthcare professionals and occupational health managers who managed the nonmanufacturing industry showed high importance and low performance level in "analysis and planning" factor. "Analysis and planning" skill is priority training area for healthcare professionals and occupational health managers who managed nonmanufacturing industry. It is necessary to develop a training curriculum for occupational health managers that include improving analysis of worksites and plans for a health education program. Copyright © 2016. Published by Elsevier B.V.

Postexposure requirements and counseling issues resulting from the bloodborne pathogens standard.

PubMed

Lesniak, L P; Parpart, C F

1994-03-01

The management of employees during follow up for an occupational exposure for bloodborne pathogens presents clear opportunities and challenges for the occupational health nurse. These include understanding the intent of the OSHA Bloodborne Pathogens Standard, identifying postexposure follow up requirements, counseling workers for pre- and posttest procedures, protecting the confidentiality of medical records and information, and educating both employees and management about bloodborne pathogens and the potential for transmission. Postexposure follow up is also another opportunity for the occupational health nurse to educate employees about health promotion and disease prevention.

Adapting Wireless Technology to Lighting Control and Environmental Sensing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dana Teasdale; Francis Rubinstein; Dave Watson

The high cost of retrofitting buildings with advanced lighting control systems is a barrier to adoption of this energy-saving technology. Wireless technology, however, offers a solution to mounting installation costs since it requires no additional wiring to implement. To demonstrate the feasibility of such a system, a prototype wirelessly-controlled advanced lighting system was designed and built. The system includes the following components: a wirelessly-controllable analog circuit module (ACM), a wirelessly-controllable electronic dimmable ballast, a T8 3-lamp fixture, an environmental multi-sensor, a current transducer, and control software. The ACM, dimmable ballast, multi-sensor, and current transducer were all integrated with SmartMesh{trademark} wirelessmore » mesh networking nodes, called motes, enabling wireless communication, sensor monitoring, and actuator control. Each mote-enabled device has a reliable communication path to the SmartMesh Manager, a single board computer that controls network functions and connects the wireless network to a PC running lighting control software. The ACM is capable of locally driving one or more standard 0-10 Volt electronic dimmable ballasts through relay control and a 0-10 Volt controllable output. The mote-integrated electronic dimmable ballast is designed to drive a standard 3-lamp T8 light fixture. The environmental multi-sensor measures occupancy, light level and temperature. The current transducer is used to measure the power consumed by the fixture. Control software was developed to implement advanced lighting algorithms, including daylight ramping, occupancy control, and demand response. Engineering prototypes of each component were fabricated and tested in a bench-scale system. Based on standard industry practices, a cost analysis was conducted. It is estimated that the installation cost of a wireless advanced lighting control system for a retrofit application is at least 30% lower than a comparable wired system for a typical 16,000 square-foot office building, with a payback period of less than 3 years.« less

75 FR 55159 - Science and Technology Reinvention Laboratory (STRL) Personnel Management Demonstration Project...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-09

.... Above GS-15 Positions B. Classification 1. Occupational Series 2. Classification Standards and Position... Duty Locations Appendix B: Occupational Series by Occupational Family Appendix C: Intervention Model..., MD; Lakehurst, NJ; and Orlando, FL. These facilities support research, development, test, evaluation...

29 CFR 1928.1027 - Cadmium.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 9 2011-07-01 2011-07-01 false Cadmium. 1928.1027 Section 1928.1027 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) OCCUPATIONAL SAFETY AND HEALTH STANDARDS FOR AGRICULTURE Occupational Health § 1928.1027 Cadmium. See § 1910...

29 CFR 1928.1027 - Cadmium.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 29 Labor 9 2012-07-01 2012-07-01 false Cadmium. 1928.1027 Section 1928.1027 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) OCCUPATIONAL SAFETY AND HEALTH STANDARDS FOR AGRICULTURE Occupational Health § 1928.1027 Cadmium. See § 1910...

29 CFR 1928.1027 - Cadmium.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 9 2014-07-01 2014-07-01 false Cadmium. 1928.1027 Section 1928.1027 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) OCCUPATIONAL SAFETY AND HEALTH STANDARDS FOR AGRICULTURE Occupational Health § 1928.1027 Cadmium. See § 1910...

29 CFR 1928.1027 - Cadmium.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 29 Labor 9 2013-07-01 2013-07-01 false Cadmium. 1928.1027 Section 1928.1027 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) OCCUPATIONAL SAFETY AND HEALTH STANDARDS FOR AGRICULTURE Occupational Health § 1928.1027 Cadmium. See § 1910...

29 CFR 1956.60 - Description of the plan as initially approved.

Code of Federal Regulations, 2011 CFR

2011-07-01

... New Jersey State Plan for Public Employee Occupational Safety and Health received initial OSHA... identical to OSHA occupational safety and health standards promulgated as of December 7, 1998, with... Section 1956.60 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH...

24 CFR 35.1345 - Occupant protection and worksite preparation.

Code of Federal Regulations, 2011 CFR

2011-04-01

... Housing and Urban Development LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES Methods and Standards for Lead-Paint Hazard Evaluation and Hazard Reduction Activities § 35.1345 Occupant... occupants and the environment from contamination from lead-contaminated or lead-containing materials during...

24 CFR 35.1345 - Occupant protection and worksite preparation.

Code of Federal Regulations, 2012 CFR

2012-04-01

... Housing and Urban Development LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES Methods and Standards for Lead-Paint Hazard Evaluation and Hazard Reduction Activities § 35.1345 Occupant... occupants and the environment from contamination from lead-contaminated or lead-containing materials during...

24 CFR 35.1345 - Occupant protection and worksite preparation.

Code of Federal Regulations, 2013 CFR

2013-04-01

... Housing and Urban Development LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES Methods and Standards for Lead-Paint Hazard Evaluation and Hazard Reduction Activities § 35.1345 Occupant... occupants and the environment from contamination from lead-contaminated or lead-containing materials during...

24 CFR 35.1345 - Occupant protection and worksite preparation.

Code of Federal Regulations, 2010 CFR

2010-04-01

... Housing and Urban Development LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES Methods and Standards for Lead-Paint Hazard Evaluation and Hazard Reduction Activities § 35.1345 Occupant... occupants and the environment from contamination from lead-contaminated or lead-containing materials during...

24 CFR 35.1345 - Occupant protection and worksite preparation.

Code of Federal Regulations, 2014 CFR

2014-04-01

... Housing and Urban Development LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES Methods and Standards for Lead-Paint Hazard Evaluation and Hazard Reduction Activities § 35.1345 Occupant... occupants and the environment from contamination from lead-contaminated or lead-containing materials during...

29 CFR 1902.1 - Purpose and scope.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR STATE...) This part applies the provisions of section 18 of the Williams-Steiger Occupational Safety and Health... enforcement of State occupational safety and health standards. The provisions of the part set forth the...

29 CFR 1928.1027 - Cadmium.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 9 2010-07-01 2010-07-01 false Cadmium. 1928.1027 Section 1928.1027 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) OCCUPATIONAL SAFETY AND HEALTH STANDARDS FOR AGRICULTURE Occupational Health § 1928.1027 Cadmium. See § 1910...

Racial differences in knee osteoarthritis pain: potential contribution of occupational and household tasks.

PubMed

Allen, Kelli D; Chen, Jiu-Chiuan; Callahan, Leigh F; Golightly, Yvonne M; Helmick, Charles G; Renner, Jordan B; Schwartz, Todd A; Jordan, Joanne M

2012-02-01

We examined whether occupational and household tasks contributed to differences in pain between African Americans and whites with radiographic knee osteoarthritis (OA). Participants from the Johnston County Osteoarthritis Project self-reported the frequency (often/always vs never/seldom/sometimes) of performing 9 occupational tasks involving lower extremity joint loading at their longest job (N = 868) and current job (N = 273), as well as 8 household tasks ever performed (N = 811) and currently being performed (N = 767). The associations of the numbers of occupational or household tasks with the Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC) pain subscale were first examined in simple linear regression models. If significantly associated with greater pain, each of these was included in adjusted linear regression models to examine whether the association of race with pain remained statistically significant. African Americans reported significantly greater WOMAC pain scores than whites. Exposures to more occupational tasks at the longest job and the current job were associated with greater WOMAC pain scores (p < 0.01). The association of race with greater pain scores remained statistically significant when controlling for occupational tasks at the longest job, but was reduced by 26% and no longer significant when controlling for the number of current occupational tasks. Exposures to an increasing number of household tasks were associated with lower pain scores and were not further analyzed. Current performance of physically demanding occupational tasks contributed to racial differences in pain severity among individuals with knee OA. Better workplace policies to accommodate OA-related limitations may help to reduce racial differences in pain.

ISO 14000: Origin, Structure, and Potential Barriers to Implementation.

PubMed

Casto; Ellisen; Trnovec; Kross; Ginter

1996-04-01

The ISO 14000 is likely to become the international standard for environmental management. At present, it is an evolving series of individual voluntary standards and guideline reference documents that provide business management with the structure for managing environmental impacts. These encompass environmental management systems, environmental audits, eco-labeling, environmental performance evaluations, life-cycle assessment, and environmental aspects in product standards. The authors present the rationale for the ISO 14000 and the steps in its evolution so far, as well as its present provisions and their implications and its position with regard to regulatory agencies. Particular attention is paid to the consequences of voluntary disclosure and correction of violations. Hanley & Belfus, Inc. Int J Occup Environ Health 1077-3525 2 2 1996 April/June Perspectives on Rural Environmental Health in Central Europe 125 134 EN Tomas Trnovec Burton C. Kross CIREH-Room 352, International Center, University of Iowa, Iowa City, IA 52242, USA. Emil Ginter Life expectancy is about five to seven years less in Central European countries than in comparable countries in Western Europe. Environmental and occupational health risk factors, along with the socioeconomic and political conditions that have prevailed in this region for the past 40 years, are suspected contributing factors to this condition. The initial impression among observers was that environmental pollution by industry was the primary source of contamination leading to human health effects. Current thinking by the authors recognizes that combinations of personal habits, local environmental emissions (home heating), and occupational risk factors are more likely to be influencing the health of this region, particularly in rural areas. A predictive model for standard mortality rates determined that only three potential risk factors were statistically significant: consumption of alcoholic beverages, consumption of citrus fruits, and consumption of cereals. Additional emphasis should be placed on defining risk factors in rural areas of Central Europe, and designing intervention strategies to address these factors.

Health Occupations. Dental Auxiliaries, Nursing, Therapy and Rehabilitation, Health Services Administration. Reprinted from the Occupational Outlook Handbook, 1978-79 Edition.

ERIC Educational Resources Information Center

Bureau of Labor Statistics (DOL), Washington, DC.

Focusing on health occupations, this document is one in a series of forty-one reprints from the Occupational Outlook Handbook providing current information and employment projections for individual occupations and industries through 1985. The specific occupations covered in this document include dental assistants, dental hygienists, dental…

Aluminum, Iron and Steel, and Foundry Industries. Reprinted from the Occupational Outlook Handbook, 1978-79 Edition.

ERIC Educational Resources Information Center

Bureau of Labor Statistics (DOL), Washington, DC.

Focusing on occupations in the various metal industries, this document is one in a series of forty-one reprints from the Occupational Outlook Handbook providing current information and employment projections for individual occupations and industries through 1985. The specific occupations covered in this document include occupations in the aluminum…

Occupational Therapy in Preschools: A Synthesis of Current Knowledge

ERIC Educational Resources Information Center

Jasmin, Emmanuelle; Gauthier, Anne; Julien, Marjorie; Hui, Caroline

2018-01-01

This paper presents a synthesis of current knowledge about occupational therapy in preschools (for 3-6 year olds) in order to provide a better understanding of this field of practice and to guide the implementation or programming of this service. In the literature, occupational therapy in preschools has been documented mainly in the USA. Results…

77 FR 13359 - The Cadmium in General Industry Standard; Extension of the Office of Management and Budget's (OMB...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-06

... Industry Standard protect workers from the adverse health effects that may result from their exposure to... OSHA, the National Institute for Occupational Safety and Health, the worker who is the subject of the... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2012-0005] The...

Forest management practices and the occupational safety and health administration logging standard

Treesearch

John R. Myers; David Elton Fosbroke

1995-01-01

The Occupational Safety and Health Administration (OSHA) has established safety and health regulations for the logging industry. These new regulations move beyond the prior OSHA pulpwood harvesting standard by including sawtimber harvesting operations. Because logging is a major tool used by forest managers to meet silvicultural goals, managers must be aware of what...

76 FR 9817 - Standard on Commercial Diving Operations; Extension of the Office of Management and Budget's (OMB...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-22

... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2011-0008... of Information Collection (Paperwork) Requirements AGENCY: Occupational Safety and Health... OSHA's estimate of the information collection burden is accurate. The Occupational Safety and Health...

29 CFR 1910.1 - Purpose and scope.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS General § 1910.1 Purpose and scope. (a) Section 6(a) of the Williams-Steiger Occupational Safety and Health Act of 1970 (84 Stat. 1593) provides that “without regard to...

29 CFR 1910.1 - Purpose and scope.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS General § 1910.1 Purpose and scope. (a) Section 6(a) of the Williams-Steiger Occupational Safety and Health Act of 1970 (84 Stat. 1593) provides that “without regard to...

78 FR 78385 - Agency Information Collection Activities; Submission for OMB Review; Comment Request...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-26

... Department of Labor (DOL) is submitting the Occupational Safety and Health Administration (OSHA) sponsored... pertaining to noise exposure-monitoring and audiometric testing. The Occupational Safety and Health Act... submission of responses. Agency: DOL-OSHA. Title of Collection: Occupational Noise Exposure Standard. OMB...

29 CFR 1910.1052 - Methylene Chloride.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 6 2014-07-01 2013-07-01 true Methylene Chloride. 1910.1052 Section 1910.1052 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) OCCUPATIONAL SAFETY AND HEALTH STANDARDS (CONTINUED) Toxic and Hazardous Substances § 1910.1052 Methylene Chloride. This occupational...

29 CFR 1910.1052 - Methylene Chloride.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 29 Labor 6 2013-07-01 2013-07-01 false Methylene Chloride. 1910.1052 Section 1910.1052 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) OCCUPATIONAL SAFETY AND HEALTH STANDARDS (CONTINUED) Toxic and Hazardous Substances § 1910.1052 Methylene Chloride. This occupational...

29 CFR 1910.1052 - Methylene Chloride.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 6 2011-07-01 2011-07-01 false Methylene Chloride. 1910.1052 Section 1910.1052 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) OCCUPATIONAL SAFETY AND HEALTH STANDARDS (CONTINUED) Toxic and Hazardous Substances § 1910.1052 Methylene Chloride. This occupational...

29 CFR 1910.1052 - Methylene Chloride.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 29 Labor 6 2012-07-01 2012-07-01 false Methylene Chloride. 1910.1052 Section 1910.1052 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) OCCUPATIONAL SAFETY AND HEALTH STANDARDS (CONTINUED) Toxic and Hazardous Substances § 1910.1052 Methylene Chloride. This occupational...

29 CFR 1915.57 - Uses of fissionable material in ship repairing and shipbuilding.

Code of Federal Regulations, 2010 CFR

2010-07-01

... shipbuilding. 1915.57 Section 1915.57 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) OCCUPATIONAL SAFETY AND HEALTH STANDARDS FOR... occupational radiation exposure, shall apply. (b) Any activity which involves the use of radiocative material...

Occupation and relative risk of cutaneous squamous cell carcinoma (cSCC): A 45-year follow-up study in 4 Nordic countries.

PubMed

Alfonso, Jose Hernán; Martinsen, Jan Ivar; Pukkala, Eero; Weiderpass, Elisabete; Tryggvadottir, Laufey; Nordby, Karl-Christian; Kjærheim, Kristina

2016-09-01

The age-adjusted incidence of cutaneous squamous cell carcinoma (cSCC) in the Nordic countries has increased during the last 60 years, and the identification of occupational variation in the relative risk of cSCC may have preventive implications. We sought to describe variation in the relative risk of cSCC between occupational categories in Finland, Iceland, Norway, and Sweden. This is a historical prospective cohort study based on record linkages between census data for 12.9 million people and cancer registry data from 1961 to 2005. Standardized incidence ratios for cSCC were estimated for 53 occupational categories with the cSCC incidence rates for the national population of each country used as reference. During follow-up, 87,619 incident cases of cSCC were reported to the national cancer registries. In all countries combined, significant increased standardized incidence ratios were observed among seamen, military personnel, public safety workers, technical workers, teachers, transport workers, physicians, dentists, nurses, other health workers, religious workers, clerical workers, administrators, and sale agents (standardized incidence ratios between 1.08 and 1.77). Information on occupation was based on 1 point in time only. The occupational variation of the relative risk of cSCC might be associated with socioeconomic factors, and to some extent to occupational exposures. Copyright © 2016 American Academy of Dermatology, Inc. Published by Elsevier Inc. All rights reserved.

The OSHA Hazardous Chemical Occupational Exposure Standard for Laboratories - A New Management Regulation to Ensure Employee Health

DTIC Science & Technology

1991-04-01

Hazardous Chemical Occupational Exposur PE - 87714F Standard for Laboratories- A New Management Regu- PR - SUPT lation to Ensure Employee Health TA - XX 6...produce acute or chronic adverse health effects in sional visitors such as guests or sales personnel. exposed workers . Health hazards include...standard is to safeguard the health and well- place and increases the likelihood of exposure. being of laboratory workers . The welfare of our person- A

Bloodborne Pathogens Program

NASA Technical Reports Server (NTRS)

Blasdell, Sharon

1993-01-01

The final rule on the Occupational Exposure to Bloodborne Pathogens was published in the Federal Register on Dec. 6, 1991. This Standard, 29 CFR Part 1910.130, is expected to prevent 8,900 hepatitis B infections and nearly 200 deaths a year in healthcare workers in the U.S. The Occupational Medicine and Environmental Health Services at KSC has been planning to implement this standard for several years. Various aspects of this standard and its Bloodborne Pathogens Program at KSC are discussed.

National nanotechnology partnership to protect workers

NASA Astrophysics Data System (ADS)

Howard, John; Murashov, Vladimir

2009-10-01

Nanotechnology is predicted to improve many aspects of human life. By 2015, it is estimated to represent 3.1 trillion in manufactured goods. Data is emerging that exposure to nanomaterials may pose a health risk to workers. If the economic promise of nanotechnology is to be achieved, ways need to be found to protect nanotechnology workers now. The Occupational Safety and Health Act of 1970 (OSHAct) gave the responsibility to protect workers to the Occupational Safety and Health Administration (OSHA) and the National Institute for Occupational Safety and Health (NIOSH) through research, standards adoption, and standards enforcement. Since 1980, adopting new occupational health standards has grown more complex. The increased complexity has greatly slowed efforts to adopt protective standards for toxic agents that are well-known to pose significant risks. The likelihood of rapidly adopting standards to protect workers from nanomaterials, whose risks are just emerging, seems even more unlikely. Use of the OSHAct's general duty clause to protect workers also seems uncertain at this time. In the interim, a national partnership led by NIOSH involving nanotech manufacturers and downstream users, workers, academic researchers, safety, and health practitioners is proposed. A National Nanotechnology Partnership would generate knowledge about the nature and the extent of worker risk, utilize that knowledge to develop risk control strategies to protect nanotechnology workers now, and provide an evidence base for NIOSH recommendations to OSHA for a nanotechnology program standard at a future date.

Occupational exposure to trichloroethylene is associated with a decline in lymphocyte subsets and soluble CD27 and CD30 markers

PubMed Central

Lan, Qing; Zhang, Luoping; Tang, Xiaojiang; Shen, Min; Smith, Martyn T.; Qiu, Chuangyi; Ge, Yichen; Ji, Zhiying; Xiong, Jun; He, Jian; Reiss, Boris; Hao, Zhenyue; Liu, Songwang; Xie, Yuxuan; Guo, Weihong; Purdue, Mark P.; Galvan, Noe; Xin, Kerry X.; Hu, Wei; Beane Freeman, Laura E.; Blair, Aaron E.; Li, Laiyu; Rothman, Nathaniel; Vermeulen, Roel; Huang, Hanlin

2010-01-01

Occupational cohort and case–control studies suggest that trichloroethylene (TCE) exposure may be associated with non-Hodgkin lymphoma (NHL) but findings are not consistent. There is a need for mechanistic studies to evaluate the biologic plausibility of this association. We carried out a cross-sectional molecular epidemiology study of 80 healthy workers that used TCE and 96 comparable unexposed controls in Guangdong, China. Personal exposure measurements were taken over a three-week period before blood collection. Ninety-six percent of workers were exposed to TCE below the current US Occupational Safety and Health Administration Permissible Exposure Limit (100 p.p.m. 8 h time-weighted average), with a mean (SD) of 22.2 (36.0) p.p.m. The total lymphocyte count and each of the major lymphocyte subsets including CD4+ T cells, CD8+ T cells, natural killer (NK) cells and B cells were significantly decreased among the TCE-exposed workers compared with controls (P < 0.05), with evidence of a dose-dependent decline. Further, there was a striking 61% decline in sCD27 plasma level and a 34% decline in sCD30 plasma level among TCE-exposed workers compared with controls. This is the first report that TCE exposure under the current Occupational Safety and Health Administration workplace standard is associated with a decline in all major lymphocyte subsets and sCD27 and sCD30, which play an important role in regulating cellular activity in subsets of T, B and NK cells and are associated with lymphocyte activation. Given that altered immunity is an established risk factor for NHL, these results add to the biologic plausibility that TCE is a possible lymphomagen. PMID:20530238

Child-Focused and Context-Focused Behaviors of Physical and Occupational Therapists during Treatment of Young Children with Cerebral Palsy.

PubMed

Kruijsen-Terpstra, Anne J A; Ellens, Mariëlle; Ketelaar, Marjolijn; Verschuren, Olaf; Di Rezze, Briano; Gorter, Jan Willem; Visser-Meily, Anne M A; Jongmans, Marian J

2016-11-01

To (1) describe the child- and context-focused behaviors of physical and occupational therapists, and (2) compare the behaviors of therapists in a standard therapy session with those of therapists trained to deliver child- and context-focused services. Videos of 49 therapy sessions provided by 36 therapists were analyzed using the intervention domains of the Paediatric Rehabilitation Observational measure of Fidelity (PROF) to examine the therapeutic behaviors of physical and occupational therapists with young children with cerebral palsy (CP) (24 to 48 months) in a Dutch rehabilitation setting. The PROF ratings of 18 standard therapy sessions were compared with the ratings of 16 child- and 15 context-focused therapy sessions. Therapists who provided standard therapy demonstrated a mix of child- and context-focused behaviors. PROF ratings indicated fewer child- and context-focused behaviors during standard therapy sessions compared with sessions where therapists were instructed to use either child- or context-focused behaviors. A sample of Dutch physical and occupational therapists of young children with CP demonstrated a mix of child- and context-focused therapy behaviors during standard therapy. Further research is recommended on clinical reasoning and the effect of setting to better understand therapists' use of child- and context-focused behaviors during therapy sessions.

[Preventive care of pregnant employees. Is there a need to set rules of cooperation between occupational and gynecologist-obstetricians?].

PubMed

Marcinkiewicz, Andrzej; Hanke, Wojciech

2012-01-01

From 2008 the obstetric care for pregnancy-related conditions has been the most common cause of sickness absence. One of the postulated causes of frequent use of sick leaves by gravids is the fear of potential harmful and arduous factors in the workplace. An insufficient involvement of occupational health services in the implementation of actions aimed at protecting pregnant employees from risks to their health and safety in the work environment, imposed by Polish law, is also suggested. A survey on the current state of preventive care of pregnant employees was conducted among gynecologists-obstetricians working in the Lodz hospitals. They were asked to present their opinions in this regard. In the opinion of the surveyed gynecologists occupational physicians do not implement their tasks involving preventive care of pregnant employees, and the main burden of care lies with their gynecologists. They admitted that the decision to certify that a pregnant employee is temporarily unable to work is determined not only by the health assessment of a pregnant employee, but also by exposures and loads occurring in her workplace. They emphasized the lack of direct contacts between gynecologists and occupational physicians who should share the information on the potential impact of working conditions on the pregnant employee's health. The survey confirmed the need, noticed also by gynecologists to elaborate standards of specific preventive care addressed to pregnant employees and to set the rules of cooperation between occupational physicians and gynecologist-obstetricians.

Professional drivers: protection needed for a high-risk occupation.

PubMed Central

Baker, S P; Wong, J; Baron, R D

1976-01-01

"On the job" motor vehicle deaths number more than 4,000 annually in the U.S. and comprise nearly one-third of all work-related deaths. Yet the Department of Labor has set no standards relating to on-the-road safety of the millions of workers whose jobs entail large amounts of driving, and Department of Transportation standards affecting occupational safety cover only drivers in interstate commerce. Drivers of some commercial vehicles, such as heavy trucks, are at special risk of injury because trucks have usually been exempted for many years from federal motor vehicle safety standards--such as standards for brakes and seatbelts--designed to prevent crashes or protect occupants in crashes. Observations based on a series of 150 fatal crashes involving tractor trailers illustrate the need for better protection of this large population of high-risk workers. Clarification of responsibility within the various federal agencies and application of available knowledge and technology are essential. PMID:937611

Health Occupations. Medical Technologists, Technicians, and Assistants; Dispensing Opticians; Ophthalmic Laboratory Technicians; Medical Record Personnel. Reprinted from the Occupational Outlook Handbook, 1978-79 Edition.

ERIC Educational Resources Information Center

Bureau of Labor Statistics (DOL), Washington, DC.

Focusing on health occupations, this document is one in a series of forty-one reprints from the Occupational Outlook Handbook providing current information and employment projections for individual occupations and industries through 1985. The specific occupations covered in this document include dispensing opticians, electrocardiograph…

Apparel, Baking, Laundry and Dry Cleaning, and Textile Mill Products Industries. Reprinted from the Occupational Outlook Handbook, 1978-79 Edition.

ERIC Educational Resources Information Center

Bureau of Labor Statistics (DOL), Washington, DC.

Focusing on occupations in the clothing and baking industries, this document is one in a series of forty-one reprints from the Occupational Outlook Handbook providing current information and employment projections for individual occupations and industries through 1985. The specific occupations covered in this document include occupations in the…

Aircraft, Missile, and Spacecraft; Office Machine and Computer; Electronics; and Motor Vehicle and Equipment Manufacturing Industries. Reprinted from the Occupational Outlook Handbook, 1978-79 Edition.

ERIC Educational Resources Information Center

Bureau of Labor Statistics (DOL), Washington, DC.

Focusing on occupations in various manufacturing industries, this document is one in a series of forty-one reprints from the Occupational Outlook Handbook providing current information and employment projections for individual occupations and industries through 1985. The specific occupations covered in this document include occupations in…

76 FR 5402 - Agency Information Collection Activities; Submission for OMB Review; Comment Request; Standard on...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-31

... (DOL) hereby announces the submission of the Occupational Safety and Health Administration (OSHA..., Attn: OMB Desk Officer for the Department of Labor, Occupational Safety and Health Administration (OSHA... electronic submission of responses. Agency: Occupational Safety and Health Administration (OSHA). Title of...

29 CFR 1952.110 - Description of the plan as initially approved.

Code of Federal Regulations, 2010 CFR

2010-07-01

... the covered occupational safety and health issues as defined by the Secretary of Labor in 29 CFR 1902... Section 1952.110 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH... requirements of part 1902. Under this legislation all occupational safety and health standards and amendments...

29 CFR 1952.210 - Description of the plan as initially approved.

Code of Federal Regulations, 2011 CFR

2011-07-01

... throughout the State. The plan defines the covered occupational safety and health issues on the basis of... Section 1952.210 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH... standards will be considered by the State Occupational Safety and Health Advisory Board which will make...

29 CFR 1952.110 - Description of the plan as initially approved.

Code of Federal Regulations, 2011 CFR

2011-07-01

... the covered occupational safety and health issues as defined by the Secretary of Labor in 29 CFR 1902... Section 1952.110 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH... requirements of part 1902. Under this legislation all occupational safety and health standards and amendments...

29 CFR 1912.5 - National Advisory Committee on Occupational Safety and Health.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Health. 1912.5 Section 1912.5 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) ADVISORY COMMITTEES ON STANDARDS Organizational Matters § 1912.5 National Advisory Committee on Occupational Safety and Health. (a) Section 7(a) of the...

29 CFR 1912.5 - National Advisory Committee on Occupational Safety and Health.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Health. 1912.5 Section 1912.5 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) ADVISORY COMMITTEES ON STANDARDS Organizational Matters § 1912.5 National Advisory Committee on Occupational Safety and Health. (a) Section 7(a) of the...

10 CFR 712.34 - Site Occupational Medical Director.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 4 2014-01-01 2014-01-01 false Site Occupational Medical Director. 712.34 Section 712.34 Energy DEPARTMENT OF ENERGY HUMAN RELIABILITY PROGRAM Medical Standards § 712.34 Site Occupational Medical Director. (a) The SOMD must nominate a physician to serve as the Designated Physician and a...

10 CFR 712.34 - Site Occupational Medical Director.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 4 2012-01-01 2012-01-01 false Site Occupational Medical Director. 712.34 Section 712.34 Energy DEPARTMENT OF ENERGY HUMAN RELIABILITY PROGRAM Medical Standards § 712.34 Site Occupational Medical Director. (a) The SOMD must nominate a physician to serve as the Designated Physician and a...

10 CFR 20.1502 - Conditions requiring individual monitoring of external and internal occupational dose.

Code of Federal Regulations, 2014 CFR

2014-01-01

... internal occupational dose. 20.1502 Section 20.1502 Energy NUCLEAR REGULATORY COMMISSION STANDARDS FOR PROTECTION AGAINST RADIATION Surveys and Monitoring § 20.1502 Conditions requiring individual monitoring of external and internal occupational dose. Each licensee shall monitor exposures to radiation and radioactive...

10 CFR 20.1502 - Conditions requiring individual monitoring of external and internal occupational dose.

Code of Federal Regulations, 2012 CFR

2012-01-01

... internal occupational dose. 20.1502 Section 20.1502 Energy NUCLEAR REGULATORY COMMISSION STANDARDS FOR PROTECTION AGAINST RADIATION Surveys and Monitoring § 20.1502 Conditions requiring individual monitoring of external and internal occupational dose. Each licensee shall monitor exposures to radiation and radioactive...

10 CFR 20.1502 - Conditions requiring individual monitoring of external and internal occupational dose.

Code of Federal Regulations, 2011 CFR

2011-01-01

... internal occupational dose. 20.1502 Section 20.1502 Energy NUCLEAR REGULATORY COMMISSION STANDARDS FOR PROTECTION AGAINST RADIATION Surveys and Monitoring § 20.1502 Conditions requiring individual monitoring of external and internal occupational dose. Each licensee shall monitor exposures to radiation and radioactive...

10 CFR 20.1502 - Conditions requiring individual monitoring of external and internal occupational dose.

Code of Federal Regulations, 2013 CFR

2013-01-01

... internal occupational dose. 20.1502 Section 20.1502 Energy NUCLEAR REGULATORY COMMISSION STANDARDS FOR PROTECTION AGAINST RADIATION Surveys and Monitoring § 20.1502 Conditions requiring individual monitoring of external and internal occupational dose. Each licensee shall monitor exposures to radiation and radioactive...

10 CFR 20.1502 - Conditions requiring individual monitoring of external and internal occupational dose.

Code of Federal Regulations, 2010 CFR

2010-01-01

... internal occupational dose. 20.1502 Section 20.1502 Energy NUCLEAR REGULATORY COMMISSION STANDARDS FOR PROTECTION AGAINST RADIATION Surveys and Monitoring § 20.1502 Conditions requiring individual monitoring of external and internal occupational dose. Each licensee shall monitor exposures to radiation and radioactive...

Cabinetmaker. Occupational Analysis Series.

ERIC Educational Resources Information Center

Chinien, Chris; Boutin, France

This document contains the analysis of the occupation of cabinetmaker, or joiner, that is accepted by the Canadian Council of Directors as the national standard for the occupation. The front matter preceding the analysis includes exploration of the development of the analysis, structure of the analysis, validation method, scope of the cabinetmaker…

Health and safety implications of occupational exposure to engineered nanomaterials.

PubMed

Stebounova, Larissa V; Morgan, Hallie; Grassian, Vicki H; Brenner, Sara

2012-01-01

The rapid growth and commercialization of nanotechnology are currently outpacing health and safety recommendations for engineered nanomaterials. As the production and use of nanomaterials increase, so does the possibility that there will be exposure of workers and the public to these materials. This review provides a summary of current research and regulatory efforts related to occupational exposure and medical surveillance for the nanotechnology workforce, focusing on the most prevalent industrial nanomaterials currently moving through the research, development, and manufacturing pipelines. Their applications and usage precedes a discussion of occupational health and safety efforts, including exposure assessment, occupational health surveillance, and regulatory considerations for these nanomaterials. Copyright © 2011 Wiley Periodicals, Inc.

Crystalline silica exposure and lung cancer mortality in diatomaceous earth industry workers: a quantitative risk assessment.

PubMed

Rice, F L; Park, R; Stayner, L; Smith, R; Gilbert, S; Checkoway, H

2001-01-01

To use various exposure-response models to estimate the risk of mortality from lung cancer due to occupational exposure to respirable crystalline silica dust. Data from a cohort mortality study of 2342 white male California diatomaceous earth mining and processing workers exposed to crystalline silica dust (mainly cristobalite) were reanalyzed with Poisson regression and Cox's proportional hazards models. Internal and external adjustments were used to control for potential confounding from the effects of time since first observation, calendar time, age, and Hispanic ethnicity. Cubic smoothing spline models were used to assess the fit of the models. Exposures were lagged by 10 years. Evaluations of the fit of the models were performed by comparing their deviances. Lifetime risks of lung cancer were estimated up to age 85 with an actuarial approach that accounted for competing causes of death. Exposure to respirable crystalline silica dust was a significant predictor (p<0.05) in nearly all of the models evaluated and the linear relative rate model with a 10 year exposure lag seemed to give the best fit in the Poisson regression analysis. For those who died of lung cancer the linear relative rate model predicted rate ratios for mortality from lung cancer of about 1.6 for the mean cumulative exposure to respirable silica compared with no exposure. The excess lifetime risk (to age 85) of mortality from lung cancer for white men exposed for 45 years and with a 10 year lag period at the current Occupational Safety and Health Administration (OSHA) standard of about 0.05 mg/m(3) for respirable cristobalite dust is 19/1000 (95% confidence interval (95% CI) 5/1000 to 46/1000). There was a significant risk of mortality from lung cancer that increased with cumulative exposure to respirable crystalline silica dust. The predicted number of deaths from lung cancer suggests that current occupational health standards may not be adequately protecting workers from the risk of lung cancer.

Occupation and risk of sudden death in a United States community: a case-control analysis.

PubMed

Zhang, Lin; Narayanan, Kumar; Suryadevara, Vallabh; Teodorescu, Carmen; Reinier, Kyndaron; Uy-Evanado, Audrey; Chugh, Harpriya; Zheng, Zhi-Jie; Gunson, Karen; Jui, Jonathan; Chugh, Sumeet S

2015-12-18

Work environment is said to influence cardiovascular risk. We assessed whether nature of occupation affects risk of sudden cardiac death (SCD) in the general population. In the ongoing, prospective Oregon Sudden Unexpected Death Study (catchment population 1 million), working-age SCD cases (18-65 years) were compared with controls who died from any cause. Usual occupation obtained from death certificates was classified using the US Census Bureau standard occupational classification descriptions and categorised as white collar, blue collar or homemaker. Odds ratio (OR) for SCD by occupation category was obtained and clinical profile of SCD cases was compared by occupation type. Among SCD cases (n=646; 74% male) compared to controls (n=622; 73.6% male), the proportion of white collar workers was higher among male SCD cases (52.7% vs 43.7%; p=0.01); the difference in females was smaller (59.5% vs 55%; p=0.62). Adjusting for race and smoking status, male white collar workers had a higher risk of SCD compared to blue collar workers (OR=1.67, (1.26 to 2.23), p<0.001). A similar, non-significant trend was observed among females (OR 1.49 (0.81 to 2.75); p=0.20). White collar SCD cases were less likely to be current smokers (34.7% vs 45.3%, p=0.008), drug misusers (13.1% vs 18.5%) or have diabetes (21.4% vs 28.2%, both p=0.07) compared to blue collar workers. Other cardiac risk factors were similar. A white collar occupation was associated with increased risk of SCD, when compared to blue collar occupations. Since differences in conventional risk factors did not explain this elevated risk, work-related behavioural and psychosocial stressors warrant a closer evaluation. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Occupation and risk of sudden death in a United States community: a case–control analysis

PubMed Central

Zhang, Lin; Narayanan, Kumar; Suryadevara, Vallabh; Teodorescu, Carmen; Reinier, Kyndaron; Uy-Evanado, Audrey; Chugh, Harpriya; Zheng, Zhi-Jie; Gunson, Karen; Jui, Jonathan; Chugh, Sumeet S

2015-01-01

Objective Work environment is said to influence cardiovascular risk. We assessed whether nature of occupation affects risk of sudden cardiac death (SCD) in the general population. Methods In the ongoing, prospective Oregon Sudden Unexpected Death Study (catchment population 1 million), working-age SCD cases (18–65 years) were compared with controls who died from any cause. Usual occupation obtained from death certificates was classified using the US Census Bureau standard occupational classification descriptions and categorised as white collar, blue collar or homemaker. Odds ratio (OR) for SCD by occupation category was obtained and clinical profile of SCD cases was compared by occupation type. Results Among SCD cases (n=646; 74% male) compared to controls (n=622; 73.6% male), the proportion of white collar workers was higher among male SCD cases (52.7% vs 43.7%; p=0.01); the difference in females was smaller (59.5% vs 55%; p=0.62). Adjusting for race and smoking status, male white collar workers had a higher risk of SCD compared to blue collar workers (OR=1.67, (1.26 to 2.23), p<0.001). A similar, non-significant trend was observed among females (OR 1.49 (0.81 to 2.75); p=0.20). White collar SCD cases were less likely to be current smokers (34.7% vs 45.3%, p=0.008), drug misusers (13.1% vs 18.5%) or have diabetes (21.4% vs 28.2%, both p=0.07) compared to blue collar workers. Other cardiac risk factors were similar. Conclusions A white collar occupation was associated with increased risk of SCD, when compared to blue collar occupations. Since differences in conventional risk factors did not explain this elevated risk, work-related behavioural and psychosocial stressors warrant a closer evaluation. PMID:26685031

Occupational exposure factors for mental and behavioral disorders at work: The FOREC thesaurus.

PubMed

Chamoux, Alain; Lambert, Céline; Vilmant, Audrey; Lanhers, Charlotte; Agius, Raymond; Boutaleb, Mounir; Bonneterre, Vincent; Naughton, Geraldine; Pereira, Bruno; Djeriri, Khalid; Ben-Brik, Eric; Breton, Christine; De Clavière, Caroline; Letheux, Corinne; Paolillo, Anne-Gaëlle; Valenty, Madeleine; Vandenberghe, Odile; Aeschlimann, Marie-Pierre; Lasfargues, Gérard; Lesage, Francois-Xavier; Dutheil, Frédéric

2018-01-01

Mental disorders in the workplace are a major public health problem. Knowledge of the impact of the psychosocial work environment on mental and behavioral disorders can assist occupational physicians in the identification and description of occupational risk situations, and help to define priority actions. However, no classification for occupational exposure factors is currently available. We aimed to build a thesaurus of "Organizational, Relational, Ethical and other Contributing Factors" (FOREC) linked with the onset of mental and behavioral disorders. The French Agency for Food, Environmental and Occupational Health and Safety (ANSES) initiated and supervised a multidisciplinary working group consisting of the representatives of the main French occupational and public health actors. All decisions were accepted on a consensus basis. This collaborative work led to the classification of occupational exposure factors for mental and behavioral disorders in the workplace. To test this thesaurus in clinical practice, a French multicenter study was implemented. Patients were workers referred to the Occupational Disease Centers for mental health issues at work. Factors contributing to mental and behavioral disorders among workers were identified and coded retrospectively from the worker's point of view using the FOREC thesaurus. We recruited 323 workers, aged 44.9±9.2 years, of which 31.3% were men. The most commonly encountered disorders were generalized anxiety disorders (106 workers, 32.8%) and moderate depressive episodes (86 workers, 26.7%). We identified 1357 factors, i.e. an average of 4.2 factors per worker. Among them, 575 (42.4%) were relational and 515 (37.9%) were organizational. All factors identified during consultations were described in the thesaurus. We built the first thesaurus of "Organizational, Relational, Ethical and other Contributing Factors" (FOREC) that may help to generate profiles of mental and behavioral disorders at work. Encoding and describing these exposure factors, as well as using a worldwide standardized and shared terminology, will help to identify specific workplace prevention programs.

The Risk of Occupational Injury Increased According to Severity of Noise Exposure After Controlling for Occupational Environment Status in Korea

PubMed Central

Yoon, Jin-Ha; Roh, Jaehoon; Kim, Chi-Nyon; Won, Jong-Uk

2016-01-01

Objectives: The aim of this study was to examine the relationship between noise exposure and risk of occupational injury. Materials and Methods: Korean National Health and Nutrition Examination Survey was used for the current study. Self-report questionnaires were used to investigate occupational injury and exposure to noise, chemicals, and machines and equipments. Results: In separate analyses for occupation and occupational hazard, the proportion of occupational injuries increased according to severity of noise exposure (all P < 0.05). Compared to the non-exposure group, the respective odds ratio (95% confidence intervals) for occupational injury was 1.39 (1.07–1.80) and 1.67 (1.13–2.46) in the mild and severe noise exposure groups, after controlling for age, gender, sleep hours, work schedule (shift work), and exposure status to hazardous chemicals and hazardous machines and equipments. Conclusions: The current study highlights the association between noise exposure and risk of occupational injury. Furthermore, risk of occupational injury increased according to severity of noise exposure. PMID:27991467

Lifetime Occupational Physical Activity and Musculoskeletal Aging in Middle-Aged Men and Women in Denmark: Retrospective Cohort Study Protocol and Methods

PubMed Central

Mortensen, Ole Steen; Reventlow, Susanne; Skov, Peder Georg; Andersen, Johan Hviid; Rubak, Tine Steen; Hansen, Åse Marie; Andersen, Lars L; Lund, Rikke; Osler, Merete; Christensen, Ulla; Avlund, Kirsten

2012-01-01

Background Physical function is essential for performing most aspects of daily life and musculoskeletal aging leads to a decline in physical function. The onset and rate of this process vary and are influenced by environmental, genetic, and hormonal factors. Although everyone eventually experiences musculoskeletal aging, it is beneficial to study the factors that influence the aging process in order to prevent disability. The role of occupational physical activity in the musculoskeletal aging process is unclear. In the past, hard physical work was thought to strengthen the worker, but current studies in this field fail to find a training effect in jobs with a high level of occupational physical activity. Objective The aim of this study is to examine the influence of lifetime occupational physical activity on physical function in midlife. The study follows the “occupational life-course perspective,” emphasizing the importance of occupational exposures accumulated throughout life on the musculoskeletal aging process taking socioeconomic and lifestyle factors into consideration. Methods This study is a retrospective cohort study including a cross-sectional measurement of physical function in 5000 middle-aged Danes. Data was obtained from the Copenhagen Aging and Midlife Biobank (CAMB) which is based on three existing Danish cohorts. Using questionnaire information about the five longest-held occupations, the job history was coded from the Danish version of the International Standard Classification of Occupations (D-ISCO 88) and a job exposure matrix containing information about occupational physical activity in Danish jobs was applied to the dataset. The primary outcomes are three tests of physical function: handgrip strength, balance, and chair rise. In the analyses, we will compare physical function in midlife according to accumulated exposure to high levels of occupational physical activity. Conclusions We have a unique opportunity to study the influence of work on early musculoskeletal aging taking other factors into account. In this study, the “healthy worker effect” is reduced due to inclusion of people from the working population and people who are already retired or have been excluded from the labor market. However, low participation in the physical tests can lead to selection bias. PMID:23611836

Occupational exposure to asbestos in the drywall taping process.

PubMed

Verma, D K; Middleton, C G

1980-04-01

Studies of airborne asbestos fiber concentrations associated with various operations of the drywall taping process have been undertaken in the province of Alberta, Canada. The results show that mixing, sanding and sweeping created high levels of airborne asbestos dust. The measured concentrations were frequently in excess of occupational health standards. Sanding in particular was assessed the most hazardous operation. The results are discussed in light of present and proposed Occupational Health Standards, and in terms of its implications for other workers, household contacts, and consumer's risk. Measures to reduce and control the health hazards associated with the process are described.

Ocean Engineering Studies Compiled 1991. Volume 7. Acrylic Windows- Diverse Design Features and Types of Service

DTIC Science & Technology

1991-01-01

acrylic plastic windows in chambers for human occupancy, the design stress should not exceed 800 psi (i.e., conversion factor of 20). 3. installed...pressure vessels for human occupancy Is 10 yr based on the conserva- tive assumption that in that length of time even stressed acrylic in a tropioal...the Safety Standard for Pressure Ves- sels for Human Oc-upancy (ASME PVHO-1 Safety Standard). Since that time, this ASME Safety Standard has

Metabolic outcomes of workers according to the International Standard Classification of Occupations in Korea.

PubMed

Lee, Wanhyung; Yeom, Hyungseon; Yoon, Jin-Ha; Won, Jong-Uk; Jung, Pil Kyun; Lee, June-Hee; Seok, Hongdeok; Roh, Jaehoon

2016-08-01

Occupation influences the risk for developing chronic metabolic diseases. We compared the prevalence of MetS by International Standard Classification of Occupations using the nationally representative data in Korea (KNHANES). We enrolled 16,763 workers (9,175 males; 7,588 females) who had measurements for the National Cholesterol Education Program criteria III and other variables. OR and 95%CIs for MetS and its components were estimated according to occupation using the multiple logistic regression models. The occupational groups with the highest age-standardized prevalence of MetS were lower skilled white-collar men (31.1 ± 2.4%) and green-collar women (24.2 ± 2.9%). Compared with the unskilled male blue-collar group, which had the lowest prevalence of MetS, the OR (95%CIs) of MetS in men were 1.77 (1.45-2.15) in higher skilled white-collar, 1.82 (1.47-2.26) in lower-skilled white-collar, 1.63 (1.32-2.01) in pink-collar and 1.37 (1.13-1.66) in skilled blue-collar workers in final logistic regression model. MetS and its components vary by occupational category and gender in ways that may guide health interventions. Am. J. Ind. Med. 59:685-694, 2016. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

E-learning as a technological tool to meet the requirements of occupational standards in training of it specialists

NASA Astrophysics Data System (ADS)

Tokareva, N. A.; Tyatyushkina, O. Y.; Cheremisina, E. N.

2016-09-01

We discuss issues of updating educational programs to meet requirements of the labor market and occupational standards of IT industry. We suggest the technology of e-learning that utilizes an open educational resource to provide the employers' participation in the development of educational content and the intensification of practical training.

Ecological policy in oil-gas complexes, HSE MS implementation in oil and gas company

NASA Astrophysics Data System (ADS)

Kochetkova, O. P.; Glyzina, T. S.; Vazim, A. A.; Tugutova, S. S.

2016-09-01

The paper considers the following issues: HSE MS international standard implementation in oil and gas industry, taking into account international practices; implementation of standards in oil and gas companies; policy in the field of environmental protection and occupational health and safety; achievement of planned indicators and targets in environmental protection and occupational health and safety.

Mortality from Amyotrophic Lateral Sclerosis and Parkinson's Disease Among Different Occupation Groups - United States, 1985-2011.

PubMed

Beard, John D; Steege, Andrea L; Ju, Jun; Lu, John; Luckhaupt, Sara E; Schubauer-Berigan, Mary K

2017-07-14

Amyotrophic lateral sclerosis (ALS) and Parkinson's disease, both progressive neurodegenerative diseases, affect >1 million Americans (1,2). Consistently reported risk factors for ALS include increasing age, male sex, and cigarette smoking (1); risk factors for Parkinson's disease include increasing age, male sex, and pesticide exposure, whereas cigarette smoking and caffeine consumption are inversely associated (2). Relative to cancer or respiratory diseases, the role of occupation in neurologic diseases is much less studied and less well understood (3). CDC evaluated associations between usual occupation and ALS and Parkinson's disease mortality using data from CDC's National Institute for Occupational Safety and Health (NIOSH) National Occupational Mortality Surveillance (NOMS), a population-based surveillance system that includes approximately 12.1 million deaths from 30 U.S. states.* Associations were estimated using proportionate mortality ratios (PMRs), standardizing indirectly by age, sex, race, and calendar year to the standard population of all NOMS deaths with occupation information. Occupations associated with higher socioeconomic status (SES) had elevated ALS and Parkinson's disease mortality. The shifts in the U.S. workforce toward older ages and higher SES occupations † highlight the importance of understanding this finding, which will require studies with designs that provide evidence for causality, detailed exposure assessment, and adjustment for additional potential confounders.

Indoor environmental and air quality characteristics, building-related health symptoms, and worker productivity in a federal government building complex.

PubMed

Lukcso, David; Guidotti, Tee Lamont; Franklin, Donald E; Burt, Allan

2016-01-01

Building Health Sciences, Inc. (BHS), investigated environmental conditions by many modalities in 71 discreet areas of 12 buildings in a government building complex that had experienced persistent occupant complaints despite correction of deficiencies following a prior survey. An online health survey was completed by 7,637 building occupants (49% response rate), a subset of whom voluntarily wore personal sampling apparatus and underwent medical evaluation. Building environmental measures were within current standards and guidelines, with few outliers. Four environmental factors were consistently associated with group-level building-related health complaints: physical comfort/discomfort, odor, job stress, and glare. Several other factors were frequently commented on by participants, including cleanliness, renovation and construction activities, and noise. Low relative humidity was significantly associated with lower respiratory and "sick building syndrome"-type symptoms. No other environmental conditions (including formaldehyde, PM10 [particulate matter with an aerodynamic diameter <10 μm], or mold levels, which were tested by 7 parameters) correlated directly with individual health symptoms. Indicators of atopy or allergy (sinusitis, allergies, and asthma), when present singly, in combinations of 2 conditions, or together, were hierarchically associated with the following: increased absence, increased presenteeism (presence at work but at reduced capacity), and increase in reported symptom-days, including symptoms not related to respiratory disease. We found that in buildings without unusual hazards and with environmental and air quality indicators within the range of acceptable indoor air quality standards, there is an identifiable population of occupants with a high prevalence of asthma and allergic disease who disproportionately report discomfort and lost productivity due to symptoms and that in "normal" buildings these outcome indicators are more closely associated with host factors than with environmental conditions. We concluded from the experience of this study that building-related health complaints should be investigated at the work-area level and not at a building-wide level. An occupant-centric medical evaluation should guide environmental investigations, especially when screening results of building indoor environmental and air quality measurements show that the building and its work areas are within regulatory standards and industry guidelines.

The development and regulation of occupational exposure limits in Taiwan.

PubMed

Shih, Tung-Sheng; Wu, Kuen-Yuh; Chen, Hong-I; Chang, Cheng-Ping; Chang, Ho-Yuan; Huang, Yi-Shiao; Liou, Saou-Hsing

2006-11-01

The occupational exposure limits (OELs) in Taiwan was promulgated in 1974 and has been revised five times since then. Many of the OELs were adopted from the most recent ACGIH TLVs and US OSHA PELs. A total of 483 chemicals were listed in the current Taiwan OELs Standard. The procedures of OELs development in Taiwan include the IOSH organized a recommended exposure limits (RELs) Committee to select the target chemicals and to recommend the RELs through literature review based on the health effects in the first stage, then, the CLA put policy needs, economical and technical feasibility into consideration and set up the final OELs at the second stage. A standard operation manual of RELs Committee has been developed. Based on our experience, several issues including the participation of representatives from a comprehensive spectrum, communication/education and training/enforcement, continuous collection of the local exposure data and health hazard information, use of health risk assessment, consideration of economic, and technical feasibility, as well as the globalization and information and experience sharing are critical in developing the appropriate OELs. Three examples including benzene, crystalline silica, and 2-methoxy ethanol are given to demonstrate the operation of system.

Improved Vehicle Occupancy Data Collection Methods

DOT National Transportation Integrated Search

1997-04-14

This report evaluates current and emerging vehicle occupancy data collection : methodologies. Five primary methods for collecting vehicle occupancy data were : identified: the traditional roadside/windshield observation method, a recently : developed...

Occupation emerges in the process of therapy.

PubMed

Price, Pollie; Miner, Stephanie

2007-01-01

The current literature offers no cohesive definition of occupation-based practice. Current definitions emphasize intervention forms and contexts, which do not reflect the complexity of practice. This article demonstrates that the therapeutic relationship and the meanings that are created in the therapy process are central aspects of occupation-based practice. Occupation, as an idea that emerges in the therapeutic process, has aspects of both doing and becoming. The authors conducted observation sessions and interviews with an occupational therapist, Nancy, who used multiple therapeutic strategies with one child, Hannah, as they worked toward Hannah's goals of going to preschool and becoming a friend. Strategies include changing therapeutic conditions, using cognitive strategies, bridging the person-task-social context, pushing participation, and engaging in narrative micronegotiations. Occupation emerged in the therapeutic processes as the occupational therapist and client co-created meaning about the client moving toward or away from who she wanted to become.

Allied Health Occupations I (Health Assistant). Middletown Public Schools Curriculum Standards.

ERIC Educational Resources Information Center

Middletown Public Schools, CT.

This volume outlines the requirements and content of a first-year course in allied health occupations education that is intended to prepare students for entry-level employment in such allied health occupations as nurse's aide and health assistant. Addressed in the individual units of the course are the following topics: health worker…

29 CFR 1952.230 - Description of the plan as initially approved.

Code of Federal Regulations, 2011 CFR

2011-07-01

... occupational safety and health issue covered by it as defined by the Secretary of Labor in § 1902.2(c)(1) of this chapter. All occupational safety and health standards promulgated by the United States Secretary... Section 1952.230 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH...

29 CFR 1952.310 - Description of the plan as initially approved.

Code of Federal Regulations, 2011 CFR

2011-07-01

... proposes to define the occupational safety and health issues covered by it as defined by the Secretary of Labor in 29 CFR 1902.2(c)(1). All occupational safety and health standards promulgated by the U.S... Section 1952.310 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH...

29 CFR 1952.230 - Description of the plan as initially approved.

Code of Federal Regulations, 2010 CFR

2010-07-01

... occupational safety and health issue covered by it as defined by the Secretary of Labor in § 1902.2(c)(1) of this chapter. All occupational safety and health standards promulgated by the United States Secretary... Section 1952.230 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH...

29 CFR 1952.310 - Description of the plan as initially approved.

Code of Federal Regulations, 2010 CFR

2010-07-01

... proposes to define the occupational safety and health issues covered by it as defined by the Secretary of Labor in 29 CFR 1902.2(c)(1). All occupational safety and health standards promulgated by the U.S... Section 1952.310 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH...

10 CFR 835.207 - Occupational dose limits for minors.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 4 2014-01-01 2014-01-01 false Occupational dose limits for minors. 835.207 Section 835.207 Energy DEPARTMENT OF ENERGY OCCUPATIONAL RADIATION PROTECTION Standards for Internal and External... to radiation and/or radioactive materials at a DOE activity are 0.1 rem (0.001 Sv) total effective...

10 CFR 835.207 - Occupational dose limits for minors.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 4 2012-01-01 2012-01-01 false Occupational dose limits for minors. 835.207 Section 835.207 Energy DEPARTMENT OF ENERGY OCCUPATIONAL RADIATION PROTECTION Standards for Internal and External... to radiation and/or radioactive materials at a DOE activity are 0.1 rem (0.001 Sv) total effective...

10 CFR 835.207 - Occupational dose limits for minors.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 4 2013-01-01 2013-01-01 false Occupational dose limits for minors. 835.207 Section 835.207 Energy DEPARTMENT OF ENERGY OCCUPATIONAL RADIATION PROTECTION Standards for Internal and External... to radiation and/or radioactive materials at a DOE activity are 0.1 rem (0.001 Sv) total effective...

10 CFR 835.207 - Occupational dose limits for minors.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 4 2011-01-01 2011-01-01 false Occupational dose limits for minors. 835.207 Section 835.207 Energy DEPARTMENT OF ENERGY OCCUPATIONAL RADIATION PROTECTION Standards for Internal and External... to radiation and/or radioactive materials at a DOE activity are 0.1 rem (0.001 Sv) total effective...

Expanding horizons. Integrating environmental health in occupational health nursing.

PubMed

Rogers, B; Cox, A R

1998-01-01

1. Environmental hazards are ubiquitous. Many exist in the workplace or occur as a result of work process exposures. 2. Environmental health is a natural component of the expanding practice of occupational health nursing. 3. AAOHN's vision for occupational and environmental health will continue to set the standard and provide leadership in the specialty.

Overeducation and Earnings within an Occupation: Controlling for Occupational Heterogeneity of Nurses

ERIC Educational Resources Information Center

Rubb, Stephen

2014-01-01

Using data from the 2004 National Sample Survey of Registered Nurses, the role of occupational heterogeneity in the standard overeducation-required-undereducation (ORU) earnings function introduced by Duncan and Hoffman [1981. "The incidence and wage effects of overeducation." "Economics of Education Review" 1, no. 1: 75-86] is…

Related Core Academic Knowledge and Skills. Georgia Core Standards for Occupational Clusters.

ERIC Educational Resources Information Center

Georgia Univ., Athens. Dept. of Occupational Studies.

This document lists the industry-identified core academic knowledge and skills that should be possessed by all Georgia students who are enrolled in occupational cluster programs and are preparing to enter the work force or continue their occupational specialization at the postsecondary level. First, 63 related communications competencies are…

International legal regulation of impact of occupational injuries and diseases on agricultural workers' health.

PubMed

Pashkov, Vitalii M; Batyhina, Olena M; Trotska, Maryna V

Agricultural workers' health depends on many factors: working conditions, security arrangements, medicine, quality of drugs, the environment, etc. Occupational injuries and diseases are also among the factors that can negatively affect their health. To analyze provisions of the international legislation and scientific literature concerning existence of restrictions on impact of occupational injuries and diseases on agricultural workers' health. International acts, data of international organizations and conclusions of scientists have been examined and used in the study. The article also integrates information from scientific journals and monographs from a medical and legal point of view with scientific methods. This article is based on dialectical, comparative, analytic, synthetic and comprehensive research methods. Impact of occupational injuries and diseases on agricultural workers' health has been studied within the system approach, as well as analysis and synthesis. The level of occupational morbidity, traumatism and above all standard of agricultural workers' health depends on the way of occupational safety organization. Working conditions and safety in agricultural industry and therefore the appropriate standard of health remain unsatisfactory in many countries.

75 FR 80819 - Draft Current Intelligence Bulletin “Occupational Exposure to Carbon Nanotubes and Nanofibers”

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-23

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention [Docket Number NIOSH 161-A] Draft Current Intelligence Bulletin ``Occupational Exposure to Carbon Nanotubes and... carbon nanotubes and to issue its findings on the potential health risks. A draft Current Intelligence...

[Safety and health in workers employed in industry. Data from Industrial Accidents Compensation Board (INAIL) and National Social Security Institute (INPS), Veneto Region, 1994-2002].

PubMed

Mastrangelo, G; Carassai, Patrizia; Carletti, Claudia; Cattani, F; De Zorzi, Lia; Di Loreto, G; Dini, M; Mattioni, G; Mundo, Antonietta; Noceta, R; Ortolani, G; Piccioni, M; Sartori, Angela; Sereno, Antonella; Priolo, G; Scoizzato, L; Marangi, G; Marchiori, L

2008-01-01

A decreasing time trend for occupational injuries and sickness absence would be the effect of the new legislation (D.Lgs. 626/94 and successive laws) on prevention in occupational settings. Conversely, the reduction of INPS disability would reflect a health improvement due to non-occupational causes. The aim of the study was to investigate the efficacy of the new legislation among employees in industry (where the law was mainly applied), via the time trend of three standardized rates in the Veneto Region. The numerator for the rate of occupational accidents (cases occurring in industry workers in the Veneto Region, broken down for sex, age and calendar years) was supplied by INAIL. The denominator for the above rate, as well as numerators and denominators for disability and sickness absence were supplied by INPS. Data were available from 1994 to 2002 for accidents and disability, and from 1997 to 2002 for sickness absence. In every year from 1994 to 2002, the rates were standardized for age and sex with the direct method, using an internal "standard" population. The time trend of year-specific standardized rates was analyzed by Joinpoint regression software. Among industrial workers in the Veneto Region, occupational accidents increased by 0.4% yearly, while disability decreased by 2.56% from 1994 to 2002. Sick absence increased up to 1999, then decreased. This epidemiological pattern is difficult to explain. The increase in accidents could be due to the increase of non-European Union workers and/or to the fact that accidents on the way to or from work were recognized as occupational accidents by INAIL starting from 2000. Both these phenomena could have contributed to increase the rate that was otherwise diminishing. On the other hand, this same situation could be due to insufficient efficacy of the legislation (D.Lgs. 626/94 and successive laws) for preventing occupational accidents and diseases.

U.K. standards of care for occupational contact dermatitis and occupational contact urticaria.

PubMed

Adisesh, A; Robinson, E; Nicholson, P J; Sen, D; Wilkinson, M

2013-06-01

The diagnosis of occupational contact dermatitis (OCD) and occupational contact urticaria (OCU) is a process that involves fastidious clinical and occupational history taking, clinical examination, patch testing and skin-prick testing. A temporal relationship of work and/or the presence of a rash on the hands only raises suspicion of an occupational cause, and does not necessarily confirm an occupational causation. The identification of allergy by patch or prick tests is a major objective, as exclusion of an offending allergen from the environment can contribute to clinical recovery in the individual worker and avoidance of new cases of disease. This can be a complex process where allergens and irritants, and therefore allergic and irritant contact dermatitis, may coexist. This article provides guidance to healthcare professionals dealing with workers exposed to agents that potentially cause OCD and OCU. Specifically it aims to summarize the 2010 British Occupational Health Research Foundation (BOHRF) systematic review, and also to help practitioners translate the BOHRF guideline into clinical practice. As such, it aims to be of value to physicians and nurses based in primary and secondary care, as well as occupational health and public health clinicians. It is hoped that it will also be of value to employers, interested workers and those with responsibility for workplace standards, such as health and safety representatives. Note that it is not intended, nor should it be taken to imply, that these standards of care override existing statutory and legal obligations. Duties under the U.K. Health and Safety at Work Act 1974, the Management of Health and Safety at Work Regulations 1999, the Control of Substances Hazardous to Health Regulations 2002, the Equality Act 2010 and other relevant legislation and guidance must be given due consideration, as should laws relevant to other countries. © 2013 Crown Copyright BJD © 2013 British Association of Dermatologists This article is published with the permission of the Controller of HMSO and the Queen's Printer for Scotland.

Population Health and Occupational Therapy.

PubMed

Braveman, Brent

2016-01-01

Occupational therapy practitioners play an important role in improving the health of populations through the development of occupational therapy interventions at the population level and through advocacy to address occupational participation and the multiple determinants of health. This article defines and explores population health as a concept and describes the appropriateness of occupational therapy practice in population health. Support of population health practice as evidenced in the official documents of the American Occupational Therapy Association and the relevance of population health for occupational therapy as a profession are reviewed. Recommendations and directions for the future are included related to celebration of the achievements of occupational therapy practitioners in the area of population health, changes to the Occupational Therapy Practice Framework and educational accreditation standards, and the importance of supporting, recognizing, rewarding, and valuing occupational therapy practitioners who assume roles in which direct care is not their primary function. Copyright © 2016 by the American Occupational Therapy Association, Inc.

Contractor’s Handbook for Construction Contracts

DTIC Science & Technology

1988-01-01

of imprisonment. 66 I 11. Emploment of Minors on Construction Contracts. On construction contracts, child labor requirements for non agricultural...occupations are governed by the Fair Labor Standards Act, Wage and 1 Hour Division. 67 Oppressive child labor is defined as employment of children under...Contracts. On construction contracts, child labor requirements for non agricultural 3 occupations are governed by the Fair Labor Standards Act, Wage and

Curriculum Based Functional Vocational Assessment Guide. Correlation of the Life Centered Career Education Curriculum with Specific Occupational Programs, Standards of Work Performance, and Campus Assessment Instruments.

ERIC Educational Resources Information Center

Quinones, William A.

This document is a guide developed for the Dallas Independent School District's (DISD's) Multiple Careers Magnet Center, which provides special education students with training in standards of work performance and specific occupational skills for successful transition to community life and employment. The document also provides information for…

Child Labor Requirements in Nonagricultural Occupations under the Fair Labor Standards Act. Child Labor Bulletin No. 101.

ERIC Educational Resources Information Center

Employment Standards Administration (DOL), Washington, DC. Wage and Hour Div.

This booklet is a guide to the provisions of the Fair Labor Standards Act (also known as the Wage-Hour Law) which apply to minors employed in nonagricultural occupations. The content is as follows: coverage of the child labor provisions (covers employees in commerce, the production of goods for commerce, an enterprise engaged in commerce, and an…

Health effects of indoor odorants.

PubMed Central

Cone, J E; Shusterman, D

1991-01-01

People assess the quality of the air indoors primarily on the basis of its odors and on their perception of associated health risk. The major current contributors to indoor odorants are human occupant odors (body odor), environmental tobacco smoke, volatile building materials, bio-odorants (particularly mold and animal-derived materials), air fresheners, deodorants, and perfumes. These are most often present as complex mixtures, making measurement of the total odorant problem difficult. There is no current method of measuring human body odor, other than by human panel studies of expert judges of air quality. Human body odors have been quantitated in terms of the "olf" which is the amount of air pollution produced by the average person. Another quantitative unit of odorants is the "decipol," which is the perceived level of pollution produced by the average human ventilated by 10 L/sec of unpolluted air or its equivalent level of dissatisfaction from nonhuman air pollutants. The standard regulatory approach, focusing on individual constituents or chemicals, is not likely to be successful in adequately controlling odorants in indoor air. Besides the current approach of setting minimum ventilation standards to prevent health effects due to indoor air pollution, a standard based on the olf or decipol unit might be more efficacious as well as simpler to measure. PMID:1821378

Fatal occupational injuries in the North Carolina construction industry, 1978-1994.

PubMed

Jackson, Seronda A; Loomis, Dana

2002-01-01

Occupational injury is a major public health problem and the cause of high rates of fatalities. The construction industry is one of the leading industries for on-the-job fatalities. The North Carolina Medical Examiner's system was used to identify all fatal unintentional injuries that occurred on the job in the state's construction industry between 1978 and 1994. The populations at risk were estimated from the 1980 and 1990 U.S. censuses. There were 525 identified deaths. All except two decedents were male, and the majority were Caucasian (79.2%). The mean age of decedents was 39 years. Death rates were higher among older workers. The crude fatality rate for the overall study period was 15.4 per 100,000 worker-years, with higher rates found among African-Americans (22.9) than among Caucasians (14.5). Occupations within the industry with the highest rates were laborers (49.5), truck drivers (43.2), operating engineers (37.2), roofers (32.8), and electricians (29.0). Falls (26.7%), electrocutions (20.4%), and motor vehicle accidents (18.9%) were found to be the leading causes of death. These findings suggest a need for continued attention to the hazards of heights and electric currents and a need for occupational safety standards for motor vehicles. This study also suggests that the hazards facing construction laborers require further investigation.

[Field investigation of occupational disease diagnosis in Guangdong Provincial Hospital for Occupational Disease Prevention and Treatment from 2009 to 2014: an analysis of 136 cases].

PubMed

Fan, C Y; Li, X D; Wen, W; Wang, Y Y; Zhang, Y; Lang, L

2016-04-20

To investigate the characteristics of 136 patients with occupational diseases, to summarize key techniques used in field investigation, and to provide a scientific basis for the development of standard operating procedures for field investigation of occupational disease diagnosis. Field investigation and routine data analysis were performed to analyze the cases diagnosed by Guangdong Provincial Hospital for Occupational Disease Prevention and Treatment from January 2009 to December 2014. A total of 136 cases of occupational diseases were diagnosed by Guangdong Provincial Hospital for Occupational Disease Prevention and Treatment from 2009 to 2014, and there were 66 cases of leukemia, 18 cases of suspected occupational benzene poisoning, 12 cases of suspected occupational handarm vibration disease, and 11 cases of suspected pneumoconiosis. Of all these patients, 41.91% were engaged in at least three types of work, 70.59% were exposed to at least three types of chemicals, 25.74% experienced changes in technical processes and chemicals, and 47.06% had disputes on the chemicals they were exposed to during verification by both parties. Occupational hazard factors were detected. Most samples (358)were used to measure benzene concentration in workplace air, among which 11.7% had a benzene concentration of >6.00 mg/m(3)(exceeding standard), 13.41% had a benzene concentration of 3.26~6.00 mg/m(3), 75.42% had a benzene concentration of<0.03 to <3.25 mg/m(3). The samples of suspected occupational hand-arm vibration disease, suspected pneumoconiosis, and suspected occupational noiseinduced hearing loss had high overstandard rates (100%, 93.8%, and 83.3%, respectively). Field investigation of occupational disease diagnosis reveals large numbers of cases of leukemia, suspected occupational benzene poisoning, suspected occupational hand-arm vibration disease, and suspected pneumoconiosis. The key aspects of field investigation include confirmation of the history of occupational exposure, identification of occupational hazard factors, confirmation of the changes in technical processes and chemicals, detection of occupational hazard factors, sampling and analysis of raw materials, and epidemiological investigation of workers with the same type of work.

29 CFR 29.4 - Criteria for apprenticeable occupations.

Code of Federal Regulations, 2011 CFR

2011-07-01

... by industry and which must: (a) Involve skills that are customarily learned in a practical way... technical skills and knowledge which, in accordance with the industry standard for the occupation, would...

["Karoshi" and causal relationships].

PubMed

Hamajima, N

1992-08-01

This paper aims to introduce a measure for use by physicians for stating the degree of probable causal relationship for "Karoshi", ie, a sudden death from cerebrovascular diseases or ischemic heart diseases under occupational stresses, as well as to give a brief description for legal procedures associated with worker's compensation and civil trial in Japan. It is a well-used measure in epidemiology, "attributable risk percent (AR%)", which can be applied to describe the extent of contribution to "Karoshi" of the excess occupational burdens the deceased worker was forced to bear. Although several standards such as average occupational burdens for the worker, average occupational burdens for an ordinary worker, burdens in a nonoccupational life, and a complete rest, might be considered for the AR% estimation, the average occupational burdens for an ordinary worker should normally be utilized as a standard for worker's compensation. The adoption of AR% could be helpful for courts to make a consistent judgement whether "Karoshi" cases are compensatable or not.

Association between cardiovascular fitness and metabolic syndrome among American workers.

PubMed

Lewis, John E; Cutrono, Stacy E; Hodgson, Nicole; LeBlanc, William G; Arheart, Kristopher L; Fleming, Lora E; Lee, David J

2015-02-01

To explore the association between cardiovascular fitness and metabolic syndrome across occupational groups using a nationally representative sample of the US population. Respondents aged 18 to 49 years from the 1999 to 2004 National Health and Nutrition Examination Survey were evaluated for cardiovascular fitness and classified with regard to metabolic syndrome. Comparisons were made across 40 occupational categories. For all occupations with and without metabolic syndrome, the estimated maximal oxygen consumption (VO2max) was 38.8 mL/kg/min (standard error = 0.5) and 41.1 mL/kg/min (standard error = 0.2), respectively. The estimated VO2max was higher for those without metabolic syndrome for most occupational groups, particularly for sales supervisors and proprietors, sales representatives, finance, business, and commodities, and freight, stock, and material movers. Low estimated VO2max among workers with metabolic syndrome can be addressed, in part, by workplace interventions designed to increase fitness. This study identifies priority occupational groups for these interventions.