Technical Problems Experienced in the Transformation of Virtual Worlds into an Education Environment and Coping Strategies

ERIC Educational Resources Information Center

Coban, Murat; Karakus, Turkan; Karaman, Asiye; Gunay, Fatma; Goktas, Yuksel

2015-01-01

Research into virtual worlds demonstrates that to successfully use virtual world platforms in different disciplines, certain limitations and potential difficulties of these platforms must be overcome. The current study extends previous research by investigating problems in integrating virtual worlds in education with a longitudinal observation of…

Diagnosing forest vegetation for air pollution injury

Treesearch

Keith F. Jensen

1989-01-01

The purpose of this Note is to help you become more technically informed about air pollution when serious problems need to be diagnosed by pollution specialists. (Except for ozone, most of the information discussed does not attempt to describe possible air pollution damage caused by long distance transport. This complex problem is currently under intense study.)

Information management, today and tomorrow. [acquisition, manipulation, transfer, and display of information

NASA Technical Reports Server (NTRS)

Pryor, H. E.

1975-01-01

Current problems and future trends in information management are briefly summarized in relation to scientific and technical information management systems and management of management information (planning, marketing, and operations).

High-Performance Computing and Four-Dimensional Data Assimilation: The Impact on Future and Current Problems

NASA Technical Reports Server (NTRS)

Makivic, Miloje S.

1996-01-01

This is the final technical report for the project entitled: "High-Performance Computing and Four-Dimensional Data Assimilation: The Impact on Future and Current Problems", funded at NPAC by the DAO at NASA/GSFC. First, the motivation for the project is given in the introductory section, followed by the executive summary of major accomplishments and the list of project-related publications. Detailed analysis and description of research results is given in subsequent chapters and in the Appendix.

Problems in the Development of High-Power Turbogenerators with Superconducting Field Windings,

DTIC Science & Technology

1983-12-05

Both these constructions use a pulsating magnetic flux, which lowers the efficiency of the machine. In the case of rotating armature winding there is...Current pickup is accomplished with the aid of springs or flexible . connections. Calculations showed that with power 500 MW such a generator should...superconducting inductor a number of complicated technical problems appears. The main problem - the provision of strength and perfect heat insulation

The Problem of Projects: Understanding the Theoretical Underpinnings of Project-Led PBL

ERIC Educational Resources Information Center

Hanney, Roy; Savin-Baden, Maggi

2013-01-01

For many years there has been a sharp division between project-based learning, and problem-based learning, with the former adopting a more technical rationalist approach while the latter adopts a more Socratic or dialogic approach. This article argues that current notions of project-based learning are too narrow and that combining the two…

Current Research on Relationships between Selected Higher Order Processes and the Communication Skills and Problems of Deaf Persons.

ERIC Educational Resources Information Center

Metz, Dale Evan; And Others

1980-01-01

The paper presents four research projects in process in the Communication Sciences Laboratory at the National Technical Institute for the Deaf. These projects illustrate four broad areas of research on the relationships between higher order information processing systems and the communication skills and problems exhibited by deaf people. (Author)

Research on trust-region algorithms for nonlinear programming. Final technical report, 1 January 1990--31 December 1992

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dennis, J.E. Jr.; Tapia, R.A.

Goal of the research was to develop and test effective, robust algorithms for general nonlinear programming (NLP) problems, particularly large or otherwise expensive NLP problems. We discuss the research conducted over the 3-year period Jan. 1990-Dec. 1992. We also describe current and future directions of our research.

The needs analysis of learning Inventive Problem Solving for technical and vocational students

NASA Astrophysics Data System (ADS)

Sai'en, Shanty; Tze Kiong, Tee; Yunos, Jailani Md; Foong, Lee Ming; Heong, Yee Mei; Mohaffyza Mohamad, Mimi

2017-08-01

Malaysian Ministry of Education highlighted in their National Higher Education Strategic plan that higher education’s need to focus adopting 21st century skills in order to increase a graduate’s employability. Current research indicates that most graduate lack of problem solving skills to help them securing the job. Realising the important of this skill hence an alternative way suggested as an option for high institution’s student to solve their problem. This study was undertaken to measure the level of problem solving skills, identify the needs of learning inventive problem solving skills and the needs of developing an Inventive problem solving module. Using a questionnaire, the study sampled 132 students from Faculty of Technical and Vocational Education. Findings indicated that majority of the students fail to define what is an inventive problem and the root cause of a problem. They also unable to state the objectives and goal thus fail to solve the problem. As a result, the students agreed on the developing Inventive Problem Solving Module to assist them.

REIMR - A Process for Utilizing Liquid Rocket Propulsion-Oriented 'Lessons Learned' to Mitigate Development Risk in Nuclear Thermal Propulsion

NASA Technical Reports Server (NTRS)

Ballard, RIchard O.

2006-01-01

This paper is a summary overview of a study conducted at the NASA Marshall Space Flight Center (NASA MSFC) during the initial phases of the Space Launch Initiative (SLI) program to evaluate a large number of technical problems associated with the design, development, test, evaluation and operation of several major liquid propellant rocket engine systems (i.e., SSME, Fastrac, J-2, F-1). One of the primary results of this study was the identification of the Fundamental Root Causes that enabled the technical problems to manifest, and practices that can be implemented to prevent them from recurring in future propulsion system development efforts, such as that which is currently envisioned in the field of nuclear thermal propulsion (NTF). This paper will discuss the Fundamental Root Causes, cite some examples of how the technical problems arose from them, and provide a discussion of how they can be mitigated or avoided in the development of an NTP system

Key Features of Research Portal for Stimulating Research in Institutions of Higher Technical Education

ERIC Educational Resources Information Center

Agarwal, Parul Dharmani; Kiran, Ravi; Verma, Anil Kumar

2012-01-01

Problem Statement: The current higher learning institutions in developed countries have adapted to their changing role in a knowledge-based society It is time for developing countries like India to focus on Knowledge Management thus, the current study presents research undertaken in understanding the implication of Knowledge Management in the…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Boing, L.E.

This paper presents an overview of the US experiences in the decommissioning technical area. Sections included are: (1) an overview of the magnitude of the problem, (2) a review of the US decommissioning process, (3) regulation of decommissioning, (4) regulatory and funding requirements for decommissioning, and (5) a general overview of all on-going and completed decommissioning projects to date in the US. The final section presents a review of some issues in the decommissioning area currently being debated in the technical specialists community.

Contribution of Engineers to Environmental Education

ERIC Educational Resources Information Center

Hirst, Eric

1972-01-01

Describes a junior level course taught at Tuskegee Institute, Alabama, Technology and Society," to show how engineers/technologists can contribute to environmental education. To improve understanding of the interactions between technology and society, interdisciplinary courses are needed which examine current socio-technical problems. (BL)

CURRENT TECHNICAL PROBLEMS IN EMERGY ANALYSIS

EPA Science Inventory

: Emergy Analysis has been a rapidly evolving assessment methodology for the past 30 years. This process of development was primarily driven by the inquiring mind and ceaseless activity of its founder, H.T. Odum, his students, and colleagues. Historically, as new kinds of proble...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liun, Edwaren, E-mail: edwaren@batan.go.id; Suparman, E-mail: edwaren@batan.go.id

Regarding nuclear power plant development in Bangka Island, it can be estimated that produced power will be oversupply for the Bangka Island and needs to transmit to Sumatra or Java Island. The distance between the regions or islands causing considerable loss of power in transmission by alternating current, and a wide range of technical and economical issues. The objective of this paper addresses to economics analysis of direct current transmission system to overcome those technical problem. Direct current transmission has a stable characteristic, so that the power delivery from Bangka to Sumatra or Java in a large scale efficiently andmore » reliably can be done. HVDC system costs depend on the power capacity applied to the system and length of the transmission line in addition to other variables that may be different.« less

Cost estimation of HVDC transmission system of Bangka's NPP candidates

NASA Astrophysics Data System (ADS)

Liun, Edwaren; Suparman

2014-09-01

Regarding nuclear power plant development in Bangka Island, it can be estimated that produced power will be oversupply for the Bangka Island and needs to transmit to Sumatra or Java Island. The distance between the regions or islands causing considerable loss of power in transmission by alternating current, and a wide range of technical and economical issues. The objective of this paper addresses to economics analysis of direct current transmission system to overcome those technical problem. Direct current transmission has a stable characteristic, so that the power delivery from Bangka to Sumatra or Java in a large scale efficiently and reliably can be done. HVDC system costs depend on the power capacity applied to the system and length of the transmission line in addition to other variables that may be different.

Refurbishment of durban fixed ukzn lidar for atmospheric studies - current status

NASA Astrophysics Data System (ADS)

Sivakumar, Venkataraman

2018-04-01

The fixed LIDAR system at University of KwaZulu-Natal (UKZN) in Durban was installed in 1999 and operated until 2004. In 2004, the system was relocated and operation closed due to various technical and instrument problems. The restructuring of the LIDAR system was initiated in 2013 and it is now used to measure vertical aerosol profiles in the height range 03-25 km. Here, we describe the present system in detail, including technical specifications and results obtained from a recent LIDAR calibration campaign.

Practical of Ethics Education in Junior High School Technical Arts

NASA Astrophysics Data System (ADS)

Iwata, Ryo; Hirano, Shigeo

Now, such as forgery, camouflage, concealment, and the alteration, the problems resulting from lack of the sense of ethics are occurring frequently. The department of junior high school technical arts to engineering ethics education is required for the solution. However, the example of introducing the ethics education is few in a current junior high school technical arts department. It is considered that it leads to a further improvement of the morality consideration by teaching from a past case to the engineering ethics at the stage of the compulsory education. In this thesis, it reports on the execution contents and an educational result.

Wilkinson Microwave Anisotropy Probe (WMAP) Battery Operations Problem Resolution Team (PRT)

NASA Technical Reports Server (NTRS)

Keys, Denney J.

2010-01-01

The NASA Technical Discipline Fellow for Electrical Power, was requested to form a Problem Resolution Team (PRT) to help assess the health of the flight battery that is currently operating aboard NASA's Wilkinson Microwave Anisotropy Probe (WMAP) and provide recommendations for battery operations to mitigate the risk of impacting science operations for the rest of the mission. This report contains the outcome of the PRT's assessment.

Establishing research and management priorities for invasive water primroses (Ludwigia spp.)

USDA-ARS?s Scientific Manuscript database

This technical report provides background information on invasive, aquatic Ludwigia species to assist aquatic resource managers. The report includes a description of the problems caused by these invasive plant species and why their current aggressive spread should concern resource managers and poli...

Directory of Teacher-Training Colleges.

ERIC Educational Resources Information Center

United Nations Educational, Scientific, and Cultural Organization, Paris (France).

This directory contains information on the organization, trends, and current problems of teacher education in the 24 teacher-training colleges established in Africa since 1960 with the financial support of the United Nations Development Programme (UNDP) (Special Fund) and technical assistance from United Nations Educational, Scientific, and…

Protecting Our Own. Community Child Passenger Safety Programs.

ERIC Educational Resources Information Center

National Highway Traffic Safety Administration (DOT), Washington, DC.

This manual provides information on implementing a local child passenger safety program. It covers understanding the problems and solutions; deciding what can be done; planning and carrying out a project; providing adequate, accurate, and current technical information; and reaching additional sources of information. Chapter 1 provides community…

Subjective Appraisal as a Feedback Tool. Technical Report 604.

ERIC Educational Resources Information Center

Burnside, Billy L.

This report examines the accuracy of subjective appraisals of several aspects of task performance, including proficiency, difficulty, frequency, and criticality. An introduction discusses current Army use of subjective appraisal, feedback methods, and problems with subjective appraisal. Data pertaining to the accuracy of various types of appraisal…

The Technical Problems of Anti-theft Diagnostics in a Traction Network

NASA Astrophysics Data System (ADS)

Mikulski, Jerzy; Młynczak, Jakub

2012-02-01

The paper presents an analysis of traction lines theft in the Katowice division of the Railroad Development Company (Zakład Linii Kolejowych - ZLK) as well as the principles for the anti-theft protection system, currently in development. The problem of theft is a very important issue concerning the safety of rail transportation. It is also a significant economic problem, as the cost of recreating a stolen network is very high. Moreover, the Administrator of the infrastructure bears the cost of compensation for any delays in train schedules.

Challenges of constructing salt cavern gas storage in China

NASA Astrophysics Data System (ADS)

Xia, Yan; Yuan, Guangjie; Ban, Fansheng; Zhuang, Xiaoqian; Li, Jingcui

2017-11-01

After more than ten years of research and engineering practice in salt cavern gas storage, the engineering technology of geology, drilling, leaching, completion, operation and monitoring system has been established. With the rapid growth of domestic consumption of natural gas, the requirement of underground gas storage is increasing. Because high-quality rock salt resources about 1000m depth are relatively scarce, the salt cavern gas storages will be built in deep rock salt. According to the current domestic conventional construction technical scheme, construction in deep salt formations will face many problems such as circulating pressure increasing, tubing blockage, deformation failure, higher completion risk and so on, caused by depth and the complex geological conditions. Considering these difficulties, the differences between current technical scheme and the construction scheme of twin well and big hole are analyzed, and the results show that the technical scheme of twin well and big hole have obvious advantages in reducing the circulating pressure loss, tubing blockage and failure risk, and they can be the alternative schemes to solve the technical difficulties of constructing salt cavern gas storages in the deep rock salt.

Technician Education Yearbook 1973-1974.

ERIC Educational Resources Information Center

Prakken, Lawrence D., Ed.

In this sixth (1973-74) edition of the Technician Education Yearbook, the current status in the development of community/junior colleges and technical institutes is presented on the basis of information gathered from replies to more than 3,000 questionnaires. Nine articles relating to new issues, problems, and proposals are compiled in the first…

Integrating Human and Computer Intelligence. Technical Report No. 32.

ERIC Educational Resources Information Center

Pea, Roy D.

This paper explores the thesis that advances in computer applications and artificial intelligence have important implications for the study of development and learning in psychology. Current approaches to the use of computers as devices for problem solving, reasoning, and thinking--i.e., expert systems and intelligent tutoring systems--are…

Introductory Programming Subject in European Higher Education

ERIC Educational Resources Information Center

Aleksic, Veljko; Ivanovic, Mirjana

2016-01-01

Programming is one of the basic subjects in most informatics, computer science mathematics and technical faculties' curricula. Integrated overview of the models for teaching programming, problems in teaching and suggested solutions were presented in this paper. Research covered current state of 1019 programming subjects in 715 study programmes at…

Thermal Diffusivity and Conductivity in Ceramic Matrix Fiber Composite Materials - Literature Study

DOE Office of Scientific and Technical Information (OSTI.GOV)

R.G. Quinn

A technical literature review was conducted to gain an understanding of the state of the art method, problems, results, and future of thermal diffusivity/conductivity of matrix-fiber composites for high temperature applications. This paper summarizes the results of test method development and theory. Results from testing on various sample types are discussed with concentration on the anisotropic characteristics of matrix-fiber composites, barriers to heat flow, and notable microstructure observations. The conclusion presents some observations from the technical literature, drawbacks of current information and discusses potential needs for future testing.

[Platforms are needed for innovative basic research in ophthalmology].

PubMed

Wang, Yi-qiang

2012-07-01

Basic research poses the cornerstone of technical innovation in all lines including medical sciences. Currently, there are shortages of professional scientists as well as technical supporting teams and facilities in the field of basic research of ophthalmology and visual science in China. Evaluation system and personnel policies are not supportive for innovative but high-risk-of-failure research projects. Discussion of reasons and possible solutions are given here to address these problems, aiming at promoting buildup of platforms hosting novel and important basic research in eye science in this country.

NASA Formal Methods Workshop, 1990

NASA Technical Reports Server (NTRS)

Butler, Ricky W. (Compiler)

1990-01-01

The workshop brought together researchers involved in the NASA formal methods research effort for detailed technical interchange and provided a mechanism for interaction with representatives from the FAA and the aerospace industry. The workshop also included speakers from industry to debrief the formal methods researchers on the current state of practice in flight critical system design, verification, and certification. The goals were: define and characterize the verification problem for ultra-reliable life critical flight control systems and the current state of practice in industry today; determine the proper role of formal methods in addressing these problems, and assess the state of the art and recent progress toward applying formal methods to this area.

Important Non-Technical Skills in Video-Assisted Thoracoscopic Surgery Lobectomy: Team Perspectives.

PubMed

Gjeraa, Kirsten; Mundt, Anna S; Spanager, Lene; Hansen, Henrik J; Konge, Lars; Petersen, René H; Østergaard, Doris

2017-07-01

Safety in the operating room is dependent on the team's non-technical skills. The importance of non-technical skills appears to be different for minimally invasive surgery as compared with open surgery. The aim of this study was to identify which non-technical skills are perceived by team members to be most important for patient safety, in the setting of video-assisted thoracoscopic surgery (VATS) lobectomy. This was an explorative, semistructured interview-based study with 21 participants from all four thoracic surgery centers in Denmark that perform VATS lobectomy. Data analysis was deductive, and directed content analysis was used to code the text into the Oxford Non-Technical Skills system for evaluating operating teams' non-technical skills. The most important non-technical skills described by the VATS teams were planning and preparation, situation awareness, problem solving, leadership, risk assessment, and teamwork. These non-technical skills enabled the team to achieve shared mental models, which in turn facilitated their efforts to anticipate next steps. This was viewed as important by the participants as they saw VATS lobectomy as a high-risk procedure with complementary and overlapping scopes of practice between surgical and anesthesia subteams. This study identified six non-technical skills that serve as the foundation for shared mental models of the patient, the current situation, and team resources. These findings contribute three important additions to the shared mental model construct: planning and preparation, risk assessment, and leadership. Shared mental models are crucial for patient safety because they enable VATS teams to anticipate problems through adaptive patterns of both implicit and explicit coordination. Copyright © 2017 The Society of Thoracic Surgeons. Published by Elsevier Inc. All rights reserved.

Analysis of surveying and legal problems in granting right-of-way and expropriation for the purpose of locating technical infrastructure

NASA Astrophysics Data System (ADS)

Trembecka, Anna

2016-06-01

A condition which determines the location of technical infrastructure is an entrepreneur holding the right to use the property for construction purposes. Currently, there are parallel separate legal forms allowing the use of a real property for the purpose of locating transmission lines, i.e. transmission easement (right-of-way) established under the civil law and expropriation by limiting the rights to a property under the administrative law. The aim of the study is to compare these forms conferring the right to use real properties and to analyze the related surveying and legal problems occurring in practice. The research thesis of the article is ascertainment that the current legal provisions for establishing legal titles to a property in order to locate transmission lines need to be amended. The conducted study regarded legal conditions, extent of expropriation and granting right-of-way in the city of Krakow, as well as the problems associated with the ambiguous wording of the legal regulations. Part of the research was devoted to the form of rights to land in order to carry out similar projects in some European countries (France, Czech Republic, Germany, Sweden). The justification for the analysis of these issues is dictated by the scale of practical use of the aforementioned forms of rights to land in order to locate technical infrastructure. Over the period of 2011-2014, 651 agreements were concluded on granting transmission right-of-way for 967 cadastral parcels owned by the city of Krakow, and 105 expropriation decisions were issued, limiting the use of real properties in Krakow.

Health Manpower Requirements for the Achievement of Health for All by the Year 2000 through Primary Health Care. Report of a WHO Expert Committee. Technical Report Series 717.

ERIC Educational Resources Information Center

World Health Organization, Geneva (Switzerland).

This report explains what will be necessary to achieve health for all people in the world by the year 2000 through primary health care. The booklet is organized in six chapters. The first chapter introduces the premise and describes current socioeconomic development and prospects for the future, along with current problems of health personnel…

Aircraft digital flight control technical review

NASA Technical Reports Server (NTRS)

Davenport, Otha B.; Leggett, David B.

1993-01-01

The Aircraft Digital Flight Control Technical Review was initiated by two pilot induced oscillation (PIO) incidents in the spring and summer of 1992. Maj. Gen. Franklin (PEO) wondered why the Air Force development process for digital flight control systems was not preventing PIO problems. Consequently, a technical review team was formed to examine the development process and determine why PIO problems continued to occur. The team was also to identify the 'best practices' used in the various programs. The charter of the team was to focus on the PIO problem, assess the current development process, and document the 'best practices.' The team reviewed all major USAF aircraft programs with digital flight controls, specifically, the F-15E, F-16C/D, F-22, F-111, C-17, and B-2. The team interviewed contractor, System Program Office (SPO), and Combined Test Force (CTF) personnel on these programs. The team also went to NAS Patuxent River to interview USN personnel about the F/A-18 program. The team also reviewed experimental USAF and NASA systems with digital flight control systems: X-29, X-31, F-15 STOL and Maneuver Technology Demonstrator (SMTD), and the Variable In-Flight Stability Test Aircraft (VISTA). The team also discussed the problem with other experts in the field including Ralph Smith and personnel from Calspan. The major conclusions and recommendations from the review are presented.

Pedagogy and Japanese Culture in a Distance Learning Environment

ERIC Educational Resources Information Center

Anderson, Bodi O.

2012-01-01

Current theoretical models of distance learning are driven by two impetuses: a technical CMC element, and a pedagogical foundation rooted strongly in the Western world, and driven by social constructivism. By and large these models have been exported throughout the world as-is. However, previous research has hinted at potential problems with these…

The Strategic Aspects of a Country's Human Capital Education

ERIC Educational Resources Information Center

Rutkauskas, Aleksandras Vytautas; Gruževskis, Boguslavas; Danileviciene, Irena

2016-01-01

Often the perspective of human capital is drawn with different colours: from its growing importance to the possibility of changing it with current technical and information management tools. This usually happens when analysing the human capital education and corporate problems in the context of companies and other activity-organising units. In…

Airborne Wind Shear Detection and Warning Systems: First Combined Manufacturers' and Technologists' Conference

NASA Technical Reports Server (NTRS)

Spady, Amos A., Jr. (Compiler); Bowles, Roland L. (Compiler); Schlickenmaier, Herbert (Compiler)

1988-01-01

The purpose of the meeting was to transfer significant, ongoing results gained during the first year of the joint NASA/FAA Airborne Wind Shear Program to the technical industry and to pose problems of current concern to the combined group. It also provided a forum for manufacturers to review forward-looking technology concepts and for technologists to gain an understanding of FAA certification requirements and the problems encountered by the manufacturers during the development of airborne equipment.

International Approaches for Nuclear Waste Disposal in Geological Formations: Geological Challenges in Radioactive Waste Isolation—Fifth Worldwide Review

DOE Office of Scientific and Technical Information (OSTI.GOV)

Faybishenko, Boris; Birkholzer, Jens; Sassani, David

The overall objective of the Fifth Worldwide Review (WWR-5) is to document the current state-of-the-art of major developments in a number of nations throughout the World pursuing geological disposal programs, and to summarize challenging problems and experience that have been obtained in siting, preparing and reviewing cases for the operational and long-term safety of proposed and operating nuclear waste repositories. The scope of the Review is to address current specific technical issues and challenges in safety case development along with the interplay of technical feasibility, siting, engineering design issues, and operational and post-closure safety. In particular, the chapters included inmore » the report present the following types of information: the current status of the deep geological repository programs for high level nuclear waste and low- and intermediate level nuclear waste in each country, concepts of siting and radioactive waste and spent nuclear fuel management in different countries (with the emphasis of nuclear waste disposal under different climatic conditions and different geological formations), progress in repository site selection and site characterization, technology development, buffer/backfill materials studies and testing, support activities, programs, and projects, international cooperation, and future plans, as well as regulatory issues and transboundary problems.« less

Materials education activities

NASA Technical Reports Server (NTRS)

Ries, Heidi R.; Harris, Jonice; Leake, Woodrow W.; Bunnell, L. Roy; Berrettini, Robert

1993-01-01

Last year, at NEW: Update '91, a panel discussion was held to address the unique difficulties of attracting and retaining minorities and women in technical studies. Unfortunately, retention in technical majors is a problem of varying proportions for the entire student population, and must be improved in order to maintain the strength of the nation's industrial base. To investigate the cause of student attrition in technical majors, in-depth interviews of both current and former (non-graduating) engineering students at four colleges and universities in Colorado were conducted by Hewitt and Seymour. They found that there was no significant difference in the level of high school preparation and undergraduate academic performance in these two groups, despite the prevailing faculty perception that most students who switch from technical to nontechnical majors were underprepared. The majority of engineering students who changed majors reported that they were turned off by science, while one-third complained of poor teaching.

In Situ Airborne Instrumentation: Addressing and Solving Measurement Problems in Ice Clouds

DOE PAGES

Baumgardner, Darrel; Kok, Greg; Avallone, L.; ...

2012-02-01

A meeting of 31 international experts on in situ measurements from aircraft was held to identify unresolved questions concerning ice formation and evolution in ice clouds, assess the current state of instrumentation that can address these problems, introduce emerging technology that may overcome current measurement issues and recommend future courses of action that can improve our understanding of ice cloud microphysical processes and their impact on the environment. The meeting proceedings and outcome has been described in detail in a manuscript submitted to the Bulletin of the American Meteorological Society (BAMS) on March 24, 2011. This paper is currently undermore » review. The remainder of this summary, in the following pages, is the text of the BAMS article. A technical note that will be published by the National Center for Atmospheric Research is currently underway and is expected to be published before the end of the year.« less

Molded Communication Earplugs in Military Aviation.

PubMed

Lahtinen, Taija M M; Leino, Tuomo K

2015-09-01

Radio communication remains important for the delivery of safety-critical information in military aviation. Pilots are exposed to high noise levels. Noise attenuation provided by certain helmets is not sufficient, and resulting noise exposure can deteriorate operational effectiveness and flight safety. A need for hearing protection that enables efficient communication is obvious, especially for fighter and helicopter pilots. One possible solution for this issue is molded communication earplugs (m-CEP). Data about the advantages and disadvantages of m-CEPs are limited. To determine the usage rates, advantages, disadvantages and pilot opinions about m-CEPs, an anonymous survey study including 31 questions was conducted in fighter, fighter trainer, helicopter, and transport aircraft units of the Finnish Defense Forces. Of the pilots who responded, 136 (93%) had used or tried m-CEPs and 90 (62%) were currently using them. There are many benefits to m-CEPs: they seem to enhance experienced speech intelligibility, since 85% of the pilots who had experience about them reported improved speech intelligibility under difficult hearing conditions, and 93% would recommend them to other pilots. It seems m-CEPs provide equal benefits to pilots with and without current hearing problems. They were also considered better than previously used hearing protectors. Still, problems were common: 82% of the pilots reported m-CEP related drawbacks, of which technical problems and discomfort issues were the most prevalent. Most military pilots hold a positive opinion on m-CEPs and are willing to recommend their use. Technical problems and discomfort issues are, however, relatively common.

Conflict Humanitarian and Natural Knowledge: The Way to Exit from It

ERIC Educational Resources Information Center

Masalimova, Alfiya R.; Benin, Vladislav L.

2016-01-01

The urgency of the problem, which is developed in the article enclosed in an emerged reducing tendency, and sometimes a complete rejection of importance of the humanities knowledge at the current stage of scientific development. The article shows that in the context of the overestimation the role of natural and technical education by modern…

Proposals for a Dynamic Library. Technical Report.

ERIC Educational Resources Information Center

Salton, Gerard

The current library environment is first examined, and an attempt is made to explain why the standard approaches to the library problem have been less productive than had been anticipated. A new design is then introduced for modern library operations based on a two-fold strategy: on the input side, the widest possible utilization should be made of…

Tether Impact Rate Simulation and Prediction with Orbiting Satellites

NASA Technical Reports Server (NTRS)

Harrison, Jim

2002-01-01

Space elevators and other large space structures have been studied and proposed as worthwhile by futuristic space planners for at least a couple of decades. In June 1999 the Marshall Space Flight Center sponsored a Space Elevator workshop in Huntsville, Alabama, to bring together technical experts and advanced planners to discuss the current status and to define the magnitude of the technical and programmatic problems connected with the development of these massive space systems. One obvious problem that was identified, although not for the first time, were the collision probabilities between space elevators and orbital debris. Debate and uncertainty presently exist about the extent of the threat to these large structures, one in this study as large in size as a space elevator. We have tentatively concluded that orbital debris although a major concern not sufficient justification to curtail the study and development of futuristic new millennium concepts like the space elevators.

Mines and human casualties: a robotics approach toward mine clearing

NASA Astrophysics Data System (ADS)

Ghaffari, Masoud; Manthena, Dinesh; Ghaffari, Alireza; Hall, Ernest L.

2004-10-01

An estimated 100 million landmines which have been planted in more than 60 countries kill or maim thousands of civilians every year. Millions of people live in the vast dangerous areas and are not able to access to basic human services because of landmines" threats. This problem has affected many third world countries and poor nations which are not able to afford high cost solutions. This paper tries to present some experiences with the land mine victims and solutions for the mine clearing. It studies current situation of this crisis as well as state of the art robotics technology for the mine clearing. It also introduces a survey robot which is suitable for the mine clearing applications. The results show that in addition to technical aspects, this problem has many socio-economic issues. The significance of this study is to persuade robotics researchers toward this topic and to peruse the technical and humanitarian facets of this issue.

Organizational/institutional factors affecting performance in the nuclear power industry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Benson, J.L.

1992-01-01

The dramatic macro experiences occurring at Three Mile Island and Chernobyl as well as the cumulative micro experiences represented by sky-rocketing costs and public concerns have demonstrated how the institutionally and organizationally related aspects of the nuclear power industry have dominated and shaped the technical ones. Further, given the relatively stable or evolutionary nature of the technology as it is currently applied, these institutional and organizational factors contain the roots of most of the complications/problems associated with the industry relative to achieving any or all of its future performance objectives (technical, economic, and safety). Some technology transfer was attempted bymore » the author from the field of general systems/cybernetics, which was explicitly aimed at dealing with the organizational/institutional factors, i.e., the problems and issues were approached using principles and methodology substantially different from that typically seen from applications based on the more traditional paradigmic engineering/industrial management orientation.« less

The Effects of Solid Modeling and Visualization on Technical Problem Solving

ERIC Educational Resources Information Center

Koch, Douglas

2011-01-01

The purpose of this study was to determine whether or not the use of solid modeling software increases participants' success in solving a specified technical problem and how visualization affects their ability to solve a technical problem. Specifically, the study sought to determine if (a) students' visualization skills affect their problem…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Huesemann, Michael H.

It is currently believed that science and technology can provide effective solutions to most, if not all, environmental problems facing western industrial societies. The validity of this optimistic assumption is highly questionable for at least three reasons: First, current mechanistic, reductionist science is inherently incapable of providing the complete and accurate information which is required to successfully address environmental problems. Second, both the conservation of mass principle and the second law of thermodynamics dictate that most remediation technologies - while successful in solving specific pollution problems - cause unavoidable negative environmental impacts elsewhere or in the future. Third, it ismore » intrinsically impossible to design industrial processes that have no negative environmental impacts. This follows not only from the entropy law but also from the fact that any generation of energy is impossible without negative environmental consequences. It can therefore be concluded that science and technology have only very limited potential in solving current and future environmental problems. Consequently, it will be necessary to address the root cause of environmental deterioration, namely the prevailing materialistic values that are the main driving force for both overpopulation and overconsumption. The long-term protection of the environment is therefore not primarily a technical problem but rather a social and moral problem that can only be solved by drastically reducing the strong influence of materialistic values.« less

Unresolved Technical Issues in Fair Interest Measurement.

ERIC Educational Resources Information Center

Cole, Nancy S.

The problem of sex differences in interest measurement involves many technical issues and procedures. The purpose of this paper is to provide a description of the technical problems involved in construction, scoring, and interpretation of interest measures as related to sex differences and to suggest guidelines within these technical issues which…

Microwave plasma source for neutral-beam injection systems

NASA Astrophysics Data System (ADS)

1981-08-01

The overall program is described and the technical and programmatic reasons for the decision to pursue both the RFI and ECH sources into the current hydrogen test stage is discussed. The general characteristics of plasma sources in the parameter regime of interest for neutral beam applications are considered. The operational characteristics, advantages and potential problems of RFI and ECH sources are discussed.

Vocational Education in Corrections: An Interpretation of Current Problems and Issues. National Study of Vocational Education in Corrections. Technical Report No. 1.

ERIC Educational Resources Information Center

Jones, Joan Simon

This review and synthesis of the literature on correctional vocational education includes historical documents, recent surveys and reports, journal articles, dissertations, and speeches and presentations which were located by computer-assisted and manual searches of these data bases: Abstracts of Instructional and Research Materials in Vocational…

Forest inventories generate scientifically sound information on the forest resource, but do our data and information really matter?

Treesearch

Christoph Keinn; Goran Stahl

2009-01-01

Current research in forest inventory focuses very much on technical-statistical problems geared mainly to the optimization of data collection and information generation. The basic assumption is that better information leads to better decisions and, therefore, to better forest management and forest policy. Not many studies, however, strive to explicitly establish the...

Adult Literacy and Technology. Report of a Workshop (October 1-2, 1984). Technical Report No. 351.

ERIC Educational Resources Information Center

Nickerson, Raymond S.

The problems and extent of adult illiteracy are presented in this workshop report, which explores how computer and communication technology might be applied in adult literacy education. The introduction provides statistics and a discussion of past and current attempts to teach illiterate adults. The major portion of the report focuses on what…

Bridging the Divide between Safety and Risk Management for your Project or Program

NASA Technical Reports Server (NTRS)

Lutomski, Mike

2005-01-01

This presentation will bridge the divide between these separate but overlapping disciplines and help explain how to use Risk Management as an effective management decision support tool that includes safety. Risk Management is an over arching communication tool used by management to prioritize and effectively mitigate potential problems before they concur. Risk Management encompasses every kind of potential problem that can occur on a program or project. Some of these are safety issues such as hazards that have a specific likelihood and consequence that need to be controlled and included to show an integrated picture of accepted) mitigated, and residual risk. Integrating safety and other assurance disciplines is paramount to accurately representing a program s or projects risk posture. Risk is made up of several components such as technical) cost, schedule, or supportability. Safety should also be a consideration for every risk. The safety component can also have an impact on the technical, cost, and schedule aspect of a given risk. The current formats used for communication of safety and risk issues are not consistent or integrated. The presentation will explore the history of these disciplines, current work to integrate them, and suggestions for integration for the future.

An Interdisciplinary Program in Technical Communications: Problems Encountered.

ERIC Educational Resources Information Center

Eckman, Martha

The need for experts in technical communication is growing significantly while the number of college graduates in the field accounts for less than one percent of the need. Three major types of problems should be considered in trying to establish a technical communication program: those involving society's need for better technical communicators,…

Guidelines for Implementation of an Advanced Outage Control Center to Improve Outage Coordination, Problem Resolution, and Outage Risk Management

DOE Office of Scientific and Technical Information (OSTI.GOV)

St. Germain, Shawn W.; Farris, Ronald K.; Whaley, April M.

This research effort is a part of the Light-Water Reactor Sustainability (LWRS) Program, which is a research and development (R&D) program sponsored by Department of Energy (DOE) and performed in close collaboration with industry R&D programs that provide the technical foundations for licensing and managing the long-term, safe, and economical operation of current nuclear power plants. The LWRS program serves to help the U.S. nuclear industry adopt new technologies and engineering solutions that facilitate the continued safe operation of the plants and extension of the current operating licenses. The purpose of this research is to improve management of nuclear powermore » plant (NPP) outages through the development of an advanced outage control center (AOCC) that is specifically designed to maximize the usefulness of communication and collaboration technologies for outage coordination and problem resolution activities. This technical report for industry implementation outlines methods and considerations for the establishment of an AOCC. This report provides a process for implementation of a change management plan, evaluation of current outage processes, the selection of technology, and guidance for the implementation of the selected technology. Methods are presented for both adoption of technologies within an existing OCC and for a complete OCC replacement, including human factors considerations for OCC design and setup.« less

Identifying Effective Strategies to Providing Technical Support to One-to-One Programs

ERIC Educational Resources Information Center

Thomas, Mark W.

2013-01-01

The problem of this study was that while one-to-one initiatives in the K-12 environment are growing, the technical support personnel that work in these environments are experiencing problems supporting these initiatives. The purposes of this study were to: (a) identify common problems of providing technical support in a one-to-one laptop program,…

NASA's Pursuit of Low-Noise Propulsion for Low-Boom Commercial Supersonic Vehicles

NASA Technical Reports Server (NTRS)

Bridges, James; Brown, Clifford A.; Seidel, Jonathan A.

2018-01-01

Since 2006, when the Fundamental Aeronautics Program was instituted within NASA's Aeronautics Mission Directorate, there has been a Project looking at the technical barriers to commercial supersonic flight. Among the barriers is the noise produced by aircraft during landing and takeoff. Over the years that followed, research was carried out at NASA aeronautics research centers, often in collaboration with academia and industry, addressing the problem. In 2013, a high-level milestone was established, described as a Technical Challenge, with the objective of demonstrating the feasibility of a low-boom supersonic airliner that could meet current airport noise regulations. The Technical Challenge was formally called "Low Noise Propulsion for Low Boom Aircraft", and was completed in late 2016. This paper reports the technical findings from this Technical Challenge, reaching back almost 10 years to review the technologies and tools that were developed along the way. It also discusses the final aircraft configuration and propulsion systems required for a supersonic civilian aircraft to meet noise regulations using the technologies available today. Finally, the paper documents the model-scale tests that validated the acoustic performance of the study aircraft.

NASA's Pursuit of Low-Noise Propulsion for Low-Boom Commercial Supersonic Vehicles

NASA Technical Reports Server (NTRS)

Bridges, James; Brown, Clifford A.; Seidel, Jonathan

2018-01-01

Since 2006, when the Fundamental Aeronautics Program was instituted within NASA's Aeronautics Mission Directorate, there has been a Project looking at the technical barriers to commercial supersonic flight. Among the barriers is the noise produced by aircraft during landing and takeoff. Over the years that followed, research was carried out at NASA aeronautics research centers, often in collaboration with academia and industry, addressing the problem. In 2013, a high-level milestone was established, described as a Technical Challenge, with the objective of demonstrating the feasibility of a low-boom supersonic airliner that could meet current airport noise regulations. The Technical Challenge was formally called a Low Noise Propulsion for Low Boom Aircraft and was completed in late 2016. This paper reports the technical findings from this Technical Challenge, reaching back almost 10 years to review the technologies and tools that were developed along the way. It also discusses the final aircraft configuration and propulsion systems required for a supersonic civilian aircraft to meet noise regulations using the technologies available today. Finally, the paper documents the model-scale tests that validated the acoustic performance of the study aircraft.

New two-tier low pressure turbine for heavy duty steam turbines

NASA Astrophysics Data System (ADS)

Zaryankin, A. E.; Rogalev, A. N.; Osipov, S. K.; Bychkov, N. M.

2017-11-01

Among factors characterising steam turbine units of power plants, a specific metal content which value decreases inversely to turbine power is of substantive importance. In turn, their maximum power depends on the capacity of low pressure turbines. It is traditionally managed to increase either by installation of larger number of low pressure turbines or by lengthening the exhaust blades. It is worth noting that the above-mentioned methods have some technical restrictions by the number of rotors to be connected. Currently some works aimed at solving the stated technical problems appear in the literature for the purpose of increasing the unit power of turbomachines, for example, by using exhaust blades with the length of 1 500 mm and longer. However, it is to be understood that increasing the exhaust area of turbomachine only by lengthening exhaust blades cannot provide a cost-effective and reliable work of the turbine flow part. Here new problems appear: losses rise abruptly due to the stage fan-out, the turbomachine dimensions increase, etc. In this connection, an issue of development of new, technically implementable ways of turbo-units power increase is very acute today.

Technical Standards for Nursing Education Programs in the 21st Century.

PubMed

Ailey, Sarah H; Marks, Beth

The Institute of Medicine (2000, 2002) exposed serious safety problems in the health system and called for total qualitative system change. The Institute of Medicine (2011, 2015) also calls for improving the education of nurses to provide leadership for a redesigned health system. Intertwined with improving education is the need to recruit and retain diverse highly qualified students. Disability is part of diversity inclusion, but current technical standards (nonacademic requirements) for admission to many nursing programs are a barrier to the entry of persons with disabilities. Rehabilitation nurse leaders are in a unique position to improve disability diversity in nursing. The purpose of this paper is to discuss the importance of disability diversity in nursing. The history of existing technical standards used in many nursing programs is reviewed along with examples. On the basis of the concept that disability inclusion is a part of diversity inclusion, we propose a new model of technical standards for nursing education. Rehabilitation nurse leaders can lead in eliminating barriers to persons with disabilities entering nursing.

Ongoing Progress in Spacecraft Controls

NASA Technical Reports Server (NTRS)

Ghosh, Dave (Editor)

1992-01-01

This publication is a collection of papers presented at the Mars Mission Research Center workshop on Ongoing Progress in Spacecraft Controls. The technical program addressed additional Mars mission control problems that currently exist in robotic missions in addition to human missions. Topics include control systems design in the presence of large time delays, fuel-optimal propulsive control, and adaptive control to handle a variety of unknown conditions.

The Music Teacher as a Cultural Figure: A Cautionary Note on Globalized Learning as Part of a Technical Conception of Education

ERIC Educational Resources Information Center

Pio, Frederick

2017-01-01

This article is divided into three parts: the problem (globalized learning); the consequences (for general music education); and the vision (the music teacher as a cultural figure). In the first part, I claim that the current learning agenda is being increasingly instrumentalized as a carrier of a global education policy driven by technical…

Mathematical model for prediction of efficiency indicators of educational activity in high school

NASA Astrophysics Data System (ADS)

Tikhonova, O. M.; Kushnikov, V. A.; Fominykh, D. S.; Rezchikov, A. F.; Ivashchenko, V. A.; Bogomolov, A. S.; Filimonyuk, L. Yu; Dolinina, O. N.; Kushnikov, O. V.; Shulga, T. E.; Tverdokhlebov, V. A.

2018-05-01

The quality of high school is a current problem all over the world. The paper presents the system dedicated to predicting the accreditation indicators of technical universities based on J. Forrester mechanism of system dynamics. The mathematical model is developed for prediction of efficiency indicators of the educational activity and is based on the apparatus of nonlinear differential equations.

Evaluation of methods for determining hardware projected life

NASA Technical Reports Server (NTRS)

1971-01-01

An investigation of existing methods of predicting hardware life is summarized by reviewing programs having long life requirements, current research efforts on long life problems, and technical papers reporting work on life predicting techniques. The results indicate that there are no accurate quantitative means to predict hardware life for system level hardware. The effectiveness of test programs and the cause of hardware failures is considered.

Issues in Requirements Elicitation

DTIC Science & Technology

1992-09-01

oriented domain analysis ( FODA ) continues that the re- quirements analyst uses the products of domain analysis when implementing a new system [Kang 90, p...Peterson, A. Spencer. Feature-Oriented Domain Analysis ( FODA ) Feasibility Study. Technical Report CMU/SEI-90-TR-21, ADA235785, Software Engineering...3.3 Problems of Volatility 12 4 Current Elicitation Techniques 15 4.1 Information Gathering 16 4.2 Requirements Expression and Analysis 19 4.3

Evaluation of Cabin Crew Technical Knowledge

NASA Technical Reports Server (NTRS)

Dunbar, Melisa G.; Chute, Rebecca D.; Jordan, Kevin

1998-01-01

Accident and incident reports have indicated that flight attendants have numerous opportunities to provide the flight-deck crew with operational information that may prevent or essen the severity of a potential problem. Additionally, as carrier fleets transition from three person to two person flight-deck crews, the reliance upon the cabin crew for the transfer of this information may increase further. Recent research (Chute & Wiener, 1996) indicates that light attendants do not feel confident in their ability to describe mechanical parts or malfunctions of the aircraft, and the lack of flight attendant technical training has been referenced in a number of recent reports (National Transportation Safety Board, 1992; Transportation Safety Board of Canada, 1995; Chute & Wiener, 1996). The present study explored both flight attendant technical knowledge and flight attendant and dot expectations of flight attendant technical knowledge. To assess the technical knowledge if cabin crewmembers, 177 current flight attendants from two U.S. carriers voluntarily :ompleted a 13-item technical quiz. To investigate expectations of flight attendant technical knowledge, 181 pilots and a second sample of 96 flight attendants, from the same two airlines, completed surveys designed to capture each group's expectations of operational knowledge required of flight attendants. Analyses revealed several discrepancies between the present level of flight attendants.

Airborne Wind Shear Detection and Warning Systems: Fourth Combined Manufacturers' and Technologists' Conference, part 1

NASA Technical Reports Server (NTRS)

Vicroy, Dan D. (Compiler); Bowles, Roland L. (Compiler); Passman, Robert H. (Compiler)

1992-01-01

The purpose of the meeting was to transfer significant ongoing results of the NASA/FAA joint Airborne Wind Shear Program to the technical industry and to pose problems of current concern to the combined group. It also provided a forum for manufacturers to review forward-look technology concepts and for technologists to gain an understanding of the problems encountered by the manufacturers during the development of airborne equipment and the FAA certification requirements. The present document was compiled to record the essence of the technology updates and discussions which follow each.

Technology Creep and the Arms Race: ICBM Problem a Sleeper.

PubMed

Shapley, D

1978-09-22

In three articles, Science will discuss how the creep of technology affects the arms race. The first two articles will deal with the most important current example: first, how ICBM modernization is giving both sides a destabilizing, first-strike capability, and second, how arms control seems to be dealing inadequately with this pressing problem. The third article will describe other cases of incremental technical improvements affecting arms control, such as antisatellite research and ballistic missile defense research, which are bringing both sides closer to the antiballistic missile capability they forswore in a 1972 treaty.

Some observations on Chinese education

NASA Technical Reports Server (NTRS)

Spearman, M. L.

1986-01-01

China has encountered many ups and downs in the field of education over the years. Although hampered by financial and personnel problems, impressive progress has been made in primary education since 1949, particularly in urban areas. The total education system is still weak, however, with a serious shortage of qualified teachers, school buildings, and other necessary facilities. Some of the problems involved are discussed. Current efforts aimed at increasing the level of compulsory education are outlined and observations are made on the status and plans relative to basic education, technical and vocational education, teacher training, resource requirements, enrollment trends, and so on.

A study of methods for lowering aerial environmental survey cost

NASA Technical Reports Server (NTRS)

Stansberry, J. R.

1973-01-01

The results are presented of a study of methods for lowering the cost of environmental aerial surveys. A wide range of low cost techniques were investigated for possible application to current pressing urban and rural problems. The objective of the study is to establish a definition of the technical problems associated with conducting aerial surveys using various low cost techniques, to conduct a survey of equipment which may be used in low cost systems, and to establish preliminary estimates of cost. A set of candidate systems were selected and described for the environmental survey tasks.

Airborne Wind Shear Detection and Warning Systems: Third Combined Manufacturers' and Technologists' Conference, part 2

NASA Technical Reports Server (NTRS)

Vicroy, Dan D. (Compiler); Bowles, Roland L. (Compiler); Schlickenmaier, Herbert (Compiler)

1991-01-01

The Third Combined Manufacturers' and Technologists' Conference was held in Hampton, Va., on October 16-18, 1990. The purpose of the meeting was to transfer significant on-going results of the NASA/FAA joint Airborne Wind Shear Program to the technical industry and to pose problems of current concern to the combined group. It also provided a forum for manufacturers to review forward-look technology concepts and for technologists to gain an understanding of the problems encountered by the manufacturers during the development of airborne equipment and the FAA certification requirements.

Synthesizing Huber's Problem Solving and Kolb's Learning Cycle: A Balanced Approach to Technical Problem Solving

ERIC Educational Resources Information Center

Kamis, Arnold; Khan, Beverly K.

2009-01-01

How do we model and improve technical problem solving, such as network subnetting? This paper reports an experimental study that tested several hypotheses derived from Kolb's experiential learning cycle and Huber's problem solving model. As subjects solved a network subnetting problem, they mapped their mental processes according to Huber's…

Applications of Magnetic Suspension Technology to Large Scale Facilities: Progress, Problems and Promises

NASA Technical Reports Server (NTRS)

Britcher, Colin P.

1997-01-01

This paper will briefly review previous work in wind tunnel Magnetic Suspension and Balance Systems (MSBS) and will examine the handful of systems around the world currently known to be in operational condition or undergoing recommissioning. Technical developments emerging from research programs at NASA and elsewhere will be reviewed briefly, where there is potential impact on large-scale MSBSS. The likely aerodynamic applications for large MSBSs will be addressed, since these applications should properly drive system designs. A recently proposed application to ultra-high Reynolds number testing will then be addressed in some detail. Finally, some opinions on the technical feasibility and usefulness of a large MSBS will be given.

40 CFR 89.102 - Effective dates, optional inclusion, flexibility for equipment manufacturers.

Code of Federal Regulations, 2010 CFR

2010-07-01

... exemptions for technical or engineering hardship. You may request additional engine allowances under... technical or engineering problems that prevent you from meeting the requirements of this part. You must show... your engine supplier to design products. (iii) Describe the engineering or technical problems causing...

40 CFR 89.102 - Effective dates, optional inclusion, flexibility for equipment manufacturers.

Code of Federal Regulations, 2013 CFR

2013-07-01

... exemptions for technical or engineering hardship. You may request additional engine allowances under... technical or engineering problems that prevent you from meeting the requirements of this part. You must show... your engine supplier to design products. (iii) Describe the engineering or technical problems causing...

40 CFR 89.102 - Effective dates, optional inclusion, flexibility for equipment manufacturers.

Code of Federal Regulations, 2012 CFR

2012-07-01

... exemptions for technical or engineering hardship. You may request additional engine allowances under... technical or engineering problems that prevent you from meeting the requirements of this part. You must show... your engine supplier to design products. (iii) Describe the engineering or technical problems causing...

Pulp fiction - The volunteer concept (or how not to site additional LLRW disposal capacity)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Burton, D.A.

1995-12-31

Experiences of compacts and of individual states throughout the nation indicate that low-level radioactive waste disposal siting processes, based from the beginning upon the volunteer concept are fraught with problems. Most apparent among these problems is that the volunteer concept does not lead to scientifically and technically based siting endeavors. Ten years have passed since the Amendments Act of 1985, and no compact or state has been - successful in providing for new LLRW disposal capacity. That failure can be traced in part to the reliance upon the volunteer concept in siting attempts. If success is to be achieved, themore » future direction for LLRW management must focus on three areas: first, a comprehensive evaluation of all LLRW management options, including reduction of waste generated and on-site storage; secondly, a comprehensive evaluation of the current as well as projected waste stream, to determine the amount of disposal capacity actually needed; and, finally, sound scientifically and technically based siting processes.« less

Building the Vocational Phase of the Computerized Motor Skills Testing System for Use in the Electronics and Electrical Engineering Group and Hospitality Group

ERIC Educational Resources Information Center

Hsiao, Hsien-Sheng; Chen, Jyun-Chen; Hong, Kunde

2016-01-01

Technical and vocational education emphasizes the development and training of hand motor skills. However, some problems exist in the current career and aptitude tests in that they do not truly measure the hand motor skills. This study used the Nintendo Wii Remote Controller as the testing device in developing a set of computerized testing tools to…

Conceptual design for aerospace vehicles

NASA Technical Reports Server (NTRS)

Gratzer, Louis B.

1989-01-01

The designers of aircraft and more recently, aerospace vehicles have always struggled with the problems of evolving their designs to produce a machine which would perform its assigned task(s) in some optimum fashion. Almost invariably this involved dealing with more variables and constraints than could be handled in any computationally feasible way. With the advent of the electronic digital computer, the possibilities for introducing more variable and constraints into the initial design process led to greater expectations for improvement in vehicle (system) efficiency. The creation of the large scale systems necessary to achieve optimum designs has, for many reason, proved to be difficult. From a technical standpoint, significant problems arise in the development of satisfactory algorithms for processing of data from the various technical disciplines in a way that would be compatible with the complex optimization function. Also, the creation of effective optimization routines for multi-variable and constraint situations which could lead to consistent results has lagged. The current capability for carrying out the conceptual design of an aircraft on an interdisciplinary bases was evaluated to determine the need for extending this capability, and if necessary, to recommend means by which this could be carried out. Based on a review of available documentation and individual consultations, it appears that there is extensive interest at Langley Research Center as well as in the aerospace community in providing a higher level of capability that meets the technical challenges. By implication, the current design capability is inadequate and it does not operate in a way that allows the various technical disciplines to participate and cooperately interact in the design process. Based on this assessment, it was concluded that substantial effort should be devoted to developing a computer-based conceptual design system that would provide the capability needed for the near-term as well as framework for development of more advanced methods to serve future needs.

User Problems Associated with the Services of Federal and Quasi-Federal Technical Information Producing Agencies.

ERIC Educational Resources Information Center

Los Angeles Regional Technical Information Users Council, CA.

Nine reports of the Los Angeles Regional Technical Information Users Council, which identify and discuss user problem areas and recommend solutions, comprise this document. The topics of the reports are: (1) Air Force Technical Objective Document Release Program (AFTOD); (2) Army Qualitative Requirements Information Program (QDRI); (3)…

The widening gap—a swedish perspective

NASA Astrophysics Data System (ADS)

Brandell, Gerd; Hemmi, Kirsti; Thunberg, Hans

2008-09-01

Transition problems from secondary to tertiary level in mathematics have been a recurrent issue in Sweden. This paper summarises the development during the last decades. Results from two recent research studies that illuminate the transition problem are presented. The first one, based on empirical data from a major Swedish technical university, characterises the widening gap, in content and in approach, between secondary school and first year university courses. The second study deals with students' encounters with mathematical proof and is based on a large investigation at another main Swedish university. We discuss the influence on the current transition problems of school reforms and of the great expansion of higher education in Sweden during the last 10 - 15 years in view of the results from the research studies.

Integrating security in multiple, remote, and diverse facilities: how major health systems are meeting today's and tomorrow's technological and organizational challenges.

PubMed

1996-11-01

As the trend to mergers and diversification of healthcare facilities grows, so too does the challenge to security directors to effectively and efficiently protect not only acute care, emergency, and outpatient facilities, but physician office buildings, parking garages, long-term-care units, medical schools, technical service units, and even health clubs. Besides the different security and communications problems posed by each type of facility, the problem of distance between facilities and their geographic location must also be met. In this report, we'll update you on the approaches being taken by security and planning executives at three leading health systems and how they are dealing with current and future problems.

Proceedings of the NASA Conference on Space Telerobotics, volume 3

NASA Technical Reports Server (NTRS)

Rodriguez, Guillermo (Editor); Seraji, Homayoun (Editor)

1989-01-01

The theme of the Conference was man-machine collaboration in space. The Conference provided a forum for researchers and engineers to exchange ideas on the research and development required for application of telerobotics technology to the space systems planned for the 1990s and beyond. The Conference: (1) provided a view of current NASA telerobotic research and development; (2) stimulated technical exchange on man-machine systems, manipulator control, machine sensing, machine intelligence, concurrent computation, and system architectures; and (3) identified important unsolved problems of current interest which can be dealt with by future research.

Some Aspects of an Air-Core Single-Coil Magnetic Suspension System

NASA Technical Reports Server (NTRS)

Hamlet, Irvin L.; Kilgore, Robert A.

1966-01-01

This paper presents some of the technical aspects in the development at the Langley Research Center of an air-cove, dual-wound, single-coil, magnetic-suspension system with one-dimensional control. Overall electrical system design features and techniques are discussed in addition to the problems of control and stability. Special treatment is given to the operation of a dual-wound, high-current support coil which provides the bias fields and superimposed modulated field. Other designs features include a six-phase, solid-state power stage for modulation of the relatively large magnitude control current, and an associated six-phase trigger circuit.

The Third NASA Goddard Conference on Mass Storage Systems and Technologies

NASA Technical Reports Server (NTRS)

Kobler, Benjamin (Editor); Hariharan, P. C. (Editor)

1993-01-01

This report contains copies of nearly all of the technical papers and viewgraphs presented at the Goddard Conference on Mass Storage Systems and Technologies held in October 1993. The conference served as an informational exchange forum for topics primarily relating to the ingestion and management of massive amounts of data and the attendant problems involved. Discussion topics include the necessary use of computers in the solution of today's infinitely complex problems, the need for greatly increased storage densities in both optical and magnetic recording media, currently popular storage media and magnetic media storage risk factors, data archiving standards including a talk on the current status of the IEEE Storage Systems Reference Model (RM). Additional topics addressed System performance, data storage system concepts, communications technologies, data distribution systems, data compression, and error detection and correction.

Technical Parameters Modeling of a Gas Probe Foaming Using an Active Experimental Type Research

NASA Astrophysics Data System (ADS)

Tîtu, A. M.; Sandu, A. V.; Pop, A. B.; Ceocea, C.; Tîtu, S.

2018-06-01

The present paper deals with a current and complex topic, namely - a technical problem solving regarding the modeling and then optimization of some technical parameters related to the natural gas extraction process. The study subject is to optimize the gas probe sputtering using experimental research methods and data processing by regular probe intervention with different sputtering agents. This procedure makes that the hydrostatic pressure to be reduced by the foam formation from the water deposit and the scrubbing agent which can be removed from the surface by the produced gas flow. The probe production data was analyzed and the so-called candidate for the research itself emerged. This is an extremely complex study and it was carried out on the field works, finding that due to the severe gas field depletion the wells flow decreases and the start of their loading with deposit water, was registered. It was required the regular wells foaming, to optimize the daily production flow and the disposal of the wellbore accumulated water. In order to analyze the process of natural gas production, the factorial experiment and other methods were used. The reason of this choice is that the method can offer very good research results with a small number of experimental data. Finally, through this study the extraction process problems were identified by analyzing and optimizing the technical parameters, which led to a quality improvement of the extraction process.

Tanks Focus Area site needs assessment FY 1998

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

This report documents the process used by the Tanks Focus Area (TFA) to analyze and develop responses to technology needs submitted by four major US Department of Energy (DOE) sites with radioactive tank waste problems, and the initial results of the analysis. The sites are the Hanford Site, Idaho National Engineering and Environmental Laboratory (INEEL), Oak Ridge Reservation (ORR), and Savannah River Site (SRS). This document describes the TFA`s process of collecting site needs, analyzing them, and creating technical responses to the sites. It also summarizes the information contained within the TFA needs database, portraying information provided by four majormore » DOE sites with tank waste problems. The overall TFA program objective is to deliver a tank technology program that reduces the current cost, and the operational and safety risks of tank remediation. The TFA`s continues to enjoy close, cooperative relationships with each site. During the past year, the TFA has fostered exchanges of technical information between sites. These exchanges have proven to be healthy for all concerned. The TFA recognizes that site technology needs often change, and the TFA must be prepared not only to amend its program in response, but to help the sites arrive at the best technical approach to solve revised site needs.« less

The problems inherent in teaching technical writing and report writing to native Americans

NASA Technical Reports Server (NTRS)

Zukowski/faust, J.

1981-01-01

Teaching technical writing to Native Americans contending with a second language and culture is addressed. Learning difficulties arising from differences between native and acquired language and cultural systems are examined. Compartmentalized teaching, which presents the ideals of technical writing in minimal units, and skills development are considered. Rhetorical problems treated include logic of arrangement, selection of support and scope of detail, and time and space. Specific problems selected include the concept of promptness, the contextualization of purpose, interpersonal relationships, wordiness, mixture of registers, and the problem of abstracting. Four inductive procedures for students having writing and perception problems are included. Four sample exercises and a bibliography of 13 references are also included.

42 CFR 493.1451 - Standard: Technical supervisor responsibilities.

Code of Federal Regulations, 2010 CFR

2010-10-01

... testing samples; and (vi) Assessment of problem solving skills; and (9) Evaluating and documenting the... analysis and reporting of test results; (5) Resolving technical problems and ensuring that remedial actions...

Technical Efficiency and Productivity for Higher Education Institutions in Sweden

ERIC Educational Resources Information Center

Andersson, C.; Antelius, J.; Månsson, J.; Sund, K.

2017-01-01

This study investigates technical efficiency and productivity for Swedish higher education institutions (HEIs). One identified problem in previous research concerns adjusting efficiency scores for input quality. This problem is avoided using grades from upper-secondary schools. A second problem concerns heterogeneity with respect to subjects and…

Design Evolution and Methodology for Pumpkin Super-Pressure Balloons

NASA Astrophysics Data System (ADS)

Farley, Rodger

The NASA Ultra Long Duration Balloon (ULDB) program has had many technical development issues discovered and solved along its road to success as a new vehicle. It has the promise of being a sub-satellite, a means to launch up to 2700 kg to 33.5 km altitude for 100 days from a comfortable mid-latitude launch point. Current high-lift long duration ballooning is accomplished out of Antarctica with zero-pressure balloons, which cannot cope with the rigors of diurnal cycles. The ULDB design is still evolving, the product of intense analytical effort, scaled testing, improved manufacturing, and engineering intuition. The past technical problems, in particular the s-cleft deformation, their solutions, future challenges, and the methodology of pumpkin balloon design will generally be described.

Diagnosis of murine mycoplasmal infections by enzyme-linked immunosorbent assay (ELISA).

PubMed

Davis, J; Cassell, G H; Gambill, G; Cox, N; Watson, H; Davidson, M

1987-06-01

ELISA is the currently accepted method for screening rodent colonies for Mycoplasma pulmonis infection. While this assay has greatly improved mycoplasmal detection, it suffers from major defects. Cross-reactions with M. arthritidis are the major technical problem, and prevent definitive diagnosis. Current methods for obtaining a definitive diagnosis are accurate in about 80% of cases, and include ELISA testing for both organisms, immunoblot analysis, and blocking of the murine reaction with heterologous serum. Another technical difficulty is the inherent variability in the assay, which can be overcome by rigid quality control measures and careful attention to detail. The difficulties that arise from the natural history of mycoplasmal infection in barrier-maintained colonies, i.e., low incidence of infected animals and delayed antibody response in animals infected with low numbers of organisms, seriously limit the usefulness of the ELISA. While the assay can be extremely useful in screening breeding colonies and in eliminating mycoplasmas from such colonies, it cannot easily be used to screen potential sources of weanling animals for experimental use.

Simulation of Electrical Characteristics of a Solar Panel

NASA Astrophysics Data System (ADS)

Obukhov, S.; Plotnikov, I.; Kryuchkova, M.

2016-06-01

The fast-growing photovoltaic system market leads to the necessity of the informed choice of major energy components and optimization of operating conditions in order to improve energy efficiency. Development of mathematical models of the main components of photovoltaic systems to ensure their comprehensive study is an urgent problem of improving and practical using of the technology of electrical energy production. The paper presents a mathematical model of the solar module implemented in the popular software MATLAB/Simulink. Equivalent circuit of the solar cell with a diode parallel without derived resistance is used for modelling. The serie8s resistance of the solar module is calculated by Newton's iterative method using the data of its technical specifications. It ensures high precision of simulation. Model validity was evaluated by the well-known technical characteristics of the module Solarex MSX 60. The calculation results of the experiment showed that the obtained current-voltage and current-watt characteristics of the model are compatible with those of the manufacturer.

Documentation as Problem Solving for Literacy Outreach Programs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Girill, T R

2004-07-06

Age-appropriate technical writing lessons for underperforming high-school students can offer them an innovative, ''authentic'' way to improve how they read and write. Thus the techniques and principles of effective technical communication routinely applied at work also provide a positive response to one of today's great educational challenges. This workshop shows participants how to (1) introduce English and science teachers to the value of technical writing as a response to school literacy problems, (2) prepare plausible practice exercises to help students improve their basic literacy, and (3) recognize and respond to known literacy outreach pitfalls. Every effective literacy outreach project basedmore » on technical writing needs to address four key problems.« less

Diverse knowledges and competing interests: an essay on socio-technical problem-solving.

PubMed

di Norcia, Vincent

2002-01-01

Solving complex socio-technical problems, this paper claims, involves diverse knowledges (cognitive diversity), competing interests (social diversity), and pragmatism. To explain this view, this paper first explores two different cases: Canadian pulp and paper mill pollution and siting nuclear reactors in systematically sensitive areas of California. Solving such socio-technically complex problems involves cognitive diversity as well as social diversity and pragmatism. Cognitive diversity requires one to not only recognize relevant knowledges but also to assess their validity. Finally, it is suggested, integrating the resultant set of diverse relevant and valid knowledges determines the parameters of the solution space for the problem.

[Physical and technical quality assurance in German breast cancer screening: progress report of the Reference Center Muenster after three years].

PubMed

Sommer, A; Girnus, R; Wendt, B; Czwoydzinski, J; Wüstenbecker, C; Heindel, W; Lenzen, H

2009-05-01

German breast cancer screening is monitored by a large physical quality assurance program. This report refers to the first experiences of the Reference Center (RC) Muenster after three years of the technical quality control of digital and analog mammography units (MU). This paper also shows whether the presently used quality assurance (QA) method is able to ensure that the MUs in the screening program are functioning without any serious problems. RC Muenster supervises 95 units (May 2008). The daily, weekly and monthly quality assurance of these units is controlled by web-based QA software named "MammoConrol" and developed by RC Muenster. The annual QA for the units must be conducted in the form of an on-site inspection by medical physics experts of the RC and is scored by an objective ranking system. The results of these QA routines were evaluated and analyzed for this paper. During the period from 3/1/2006 to 5/31/2008, 8 % of the analog systems and 1 % of the digital systems exhibited problems in the daily QA. For 9 % of the analog MUs and 17 % of the digital MUs, failures appeared in the monthly QA. In the annual control, 86.7 % of the analog units exhibited slight problems and 13.3 % had serious problems. With respect to the digital units, 12 % were without any defects, 58 % had slight problems, 27 % had serious failures and 3 % had to be reported to the responsible authorities and were temporarily shut down. The special quality control requirements for German breast cancer screening, including annual on-site checks of the units, have shown in the last three years that QA with a high monitoring standard can be ensured for a large number of decentralized MUs. The currently used QA method sufficiently ensures that the screening program is technically safe. Further studies must show whether the density and focus of the QA measures must be reconfigured.

The problem of the driverless vehicle specified path stability control

NASA Astrophysics Data System (ADS)

Buznikov, S. E.; Endachev, D. V.; Elkin, D. S.; Strukov, V. O.

2018-02-01

Currently the effort of many leading foreign companies is focused on creation of driverless transport for transportation of cargo and passengers. Among many practical problems arising while creating driverless vehicles, the problem of the specified path stability control occupies a central place. The purpose of this paper is formalization of the problem in question in terms of the quadratic functional of the control quality, the comparative analysis of the possible solutions and justification of the choice of the optimum technical solution. As square value of the integral of the deviation from the specified path is proposed as the quadratic functional of the control quality. For generation of the set of software and hardware solution variants the Zwicky “morphological box” method is used within the hardware and software environments. The heading control algorithms use the wheel steering angle data and the deviation from the lane centerline (specified path) calculated based on the navigation data and the data from the video system. Where the video system does not detect the road marking, the control is carried out based on the wheel navigation system data and where recognizable road marking exits - based on to the video system data. The analysis of the test results allows making the conclusion that the application of the combined navigation system algorithms that provide quasi-optimum solution of the problem while meeting the strict functional limits for the technical and economic indicators of the driverless vehicle control system under development is effective.

Administrative Problems of Technical Assistance to Community Development and Agricultural Extension.

ERIC Educational Resources Information Center

Safa-Isfahani, Manouchehr

An attempt was made to analyze the administrative problems of United States technical assistance to community development and agricultural extension programs in the Philippines, Pakistan, Iran, Thailand, and Nigeria, with emphasis on field problems and on the point of view of local administrators, field technicians, and local people. The concept…

Launch Vehicle Design and Optimization Methods and Priority for the Advanced Engineering Environment

NASA Technical Reports Server (NTRS)

Rowell, Lawrence F.; Korte, John J.

2003-01-01

NASA's Advanced Engineering Environment (AEE) is a research and development program that will improve collaboration among design engineers for launch vehicle conceptual design and provide the infrastructure (methods and framework) necessary to enable that environment. In this paper, three major technical challenges facing the AEE program are identified, and three specific design problems are selected to demonstrate how advanced methods can improve current design activities. References are made to studies that demonstrate these design problems and methods, and these studies will provide the detailed information and check cases to support incorporation of these methods into the AEE. This paper provides background and terminology for discussing the launch vehicle conceptual design problem so that the diverse AEE user community can participate in prioritizing the AEE development effort.

Artificial intelligence and design: Opportunities, research problems and directions

NASA Technical Reports Server (NTRS)

Amarel, Saul

1990-01-01

The issues of industrial productivity and economic competitiveness are of major significance in the U.S. at present. By advancing the science of design, and by creating a broad computer-based methodology for automating the design of artifacts and of industrial processes, we can attain dramatic improvements in productivity. It is our thesis that developments in computer science, especially in Artificial Intelligence (AI) and in related areas of advanced computing, provide us with a unique opportunity to push beyond the present level of computer aided automation technology and to attain substantial advances in the understanding and mechanization of design processes. To attain these goals, we need to build on top of the present state of AI, and to accelerate research and development in areas that are especially relevant to design problems of realistic complexity. We propose an approach to the special challenges in this area, which combines 'core work' in AI with the development of systems for handling significant design tasks. We discuss the general nature of design problems, the scientific issues involved in studying them with the help of AI approaches, and the methodological/technical issues that one must face in developing AI systems for handling advanced design tasks. Looking at basic work in AI from the perspective of design automation, we identify a number of research problems that need special attention. These include finding solution methods for handling multiple interacting goals, formation problems, problem decompositions, and redesign problems; choosing representations for design problems with emphasis on the concept of a design record; and developing approaches for the acquisition and structuring of domain knowledge with emphasis on finding useful approximations to domain theories. Progress in handling these research problems will have major impact both on our understanding of design processes and their automation, and also on several fundamental questions that are of intrinsic concern to AI. We present examples of current AI work on specific design tasks, and discuss new directions of research, both as extensions of current work and in the context of new design tasks where domain knowledge is either intractable or incomplete. The domains discussed include Digital Circuit Design, Mechanical Design of Rotational Transmissions, Design of Computer Architectures, Marine Design, Aircraft Design, and Design of Chemical Processes and Materials. Work in these domains is significant on technical grounds, and it is also important for economic and policy reasons.

Technical Mathematics.

ERIC Educational Resources Information Center

Flannery, Carol A.

This manuscript provides information and problems for teaching mathematics to vocational education students. Problems reflect applications of mathematical concepts to specific technical areas. The materials are organized into six chapters. Chapter 1 covers basic arithmetic, including fractions, decimals, ratio and proportions, percentages, and…

Technical Limitations in Merging Secular and Sacred Functions in Monumental Churches

NASA Astrophysics Data System (ADS)

Piatkowska, Ksenia

2017-10-01

The abandonment of churches and their adaptation for secular purposes is a current subject in Europe and worldwide. Most cases involve objects that were desacralized and then rebuilt as a whole object for alternative functions. Thus far, the merging of secular and sacred functions in one monumental Catholic church has not raised any issues. The paper describes the case of St. Catherine’s Church in Gdansk, Poland, where sacred function exists parallel to the new secular function being implemented. The study is based on the authentic, professional experience of the author. It describes the technical limitations arising from the need to ensure destinies for the optimal conditions of both sacred and secular function, while avoiding undesirable interference between them. The author further identifies architectural solutions most relevant to current requirements for protection of sacred zones in the church, for preservation of the monument, and for optimal function of a modern science museum. Significant design issues include: the inviolability of the sacred zone, preservation of the historical value of the monument, proper operation of new secular zones in compliance with contemporary standards of safety, performance of the assumed mission and profitability. The research indicates specific areas where the highest probability of collision exists between the sacred and profane and where technical problems are likely to occur.

New Partnerships for Human and Economic Development. Education in a Changing South: New Policies, Patterns and Programs. Report on the Continuing Conference (1st, Atlanta, Georgia, October 13-14, 1983).

ERIC Educational Resources Information Center

Southern Education Foundation, Atlanta, GA.

Solutions to the current problems facing the South are no longer strictly moral, legal, or ethical ones, but are to a large degree technical and economic. In 1983, concern about important public policy questions relating to or arising out of education led the Southern Education Foundation to establish a continuing conference with the overall theme…

Small launchers (current and future projects in the world)

NASA Astrophysics Data System (ADS)

Naumann, W. G.

1993-01-01

Small satellites need launching services using small launchers capable of injecting 100 to 1000 kg into a polar orbit at an altitude of 1000 km. Operational small launchers are reviewed as well as developing and planned ones. Launcher characteristics, constraints, performance, and status are detailed. Few technical problems are encountered, as most launcher projects call for existing components and well known technologies. Most of the difficulties have come from launch site availability and from financial considerations.

Advances in optimal routing through computer networks

NASA Technical Reports Server (NTRS)

Paz, I. M.

1977-01-01

The optimal routing problem is defined. Progress in solving the problem during the previous decade is reviewed, with special emphasis on technical developments made during the last few years. The relationships between the routing, the throughput, and the switching technology used are discussed and their future trends are reviewed. Economic aspects are also briefly considered. Modern technical approaches for handling the routing problems and, more generally, the flow control problems are reviewed.

Principal Investigator in a Box Technical Description Document. 2.0

NASA Technical Reports Server (NTRS)

Groleau, Nick; Frainier, Richard

1994-01-01

This document provides a brief overview of the PI-in-a-Box system, which can be used for automatic real-time reaction to incoming data. We will therefore outline the current system's capabilities and limitations, and hint at how best to think about PI-in-a-Box as a tool for real-time analysis and reaction in section two, below. We also believe that the solution to many commercial real-time process problems requires data acquisition and analysis combined with rule-based reasoning and/or an intuitive user interface. We will develop the technology reuse potential in section three. Currently, the system runs only on Apple Computer's Macintosh series.

Current DOT research on the effect of multiple site damage on structural integrity

NASA Technical Reports Server (NTRS)

Tong, P.; Arin, Kemal; Jeong, David Y.; Greif, R.; Brewer, John C.; Bobo, Stephan N.; Sampath, Sam N.

1992-01-01

Multiple site damage (MSD) is a type of cracking that may be found in aging airplanes and which may adversely affect their continuing airworthiness. The Volpe National Transportation Systems Center has supported the Federal Aviation Administration Technical Center on structural integrity research for the past two and half years. The work has focused on understanding the behavior of MSD, detection of MSD during airframe inspection, and the avoidance of MSD in future designs. These three elements of the MSD problem are addressed and a summary of the completed work, the current status, and requirements for future research is provided.

76 FR 78062 - Self-Regulatory Organizations; NYSE Amex LLC; Notice of Filing and Immediate Effectiveness of...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-15

... problem and make other technical changes. The proposed change will be operative on December 1, 2011. The... experiences a bona fide systems problem and make other technical changes. The Exchange presently has three... Exchange experienced a bona fide systems problem. The Exchange proposes to amend the Fee Schedule to extend...

[Mathematical model of technical equipment of a clinical-diagnostic laboratory].

PubMed

Bukin, S I; Busygin, D V; Tilevich, M E

1990-01-01

The paper is concerned with the problems of technical equipment of standard clinico-diagnostic laboratories (CDL) in this country. The authors suggest a mathematic model that may minimize expenditures for laboratory studies. The model enables the following problems to be solved: to issue scientifically-based recommendations for technical equipment of CDL; to validate the medico-technical requirements for newly devised items; to select the optimum types of uniform items; to define optimal technical decisions at the stage of the design; to determine the lab assistant's labour productivity and the cost of some investigations; to compute the medical laboratory engineering requirement for treatment and prophylactic institutions of this country.

Problem Solving Process Research of Everyone Involved in Innovation Based on CAI Technology

NASA Astrophysics Data System (ADS)

Chen, Tao; Shao, Yunfei; Tang, Xiaowo

It is very important that non-technical department personnel especially bottom line employee serve as innovators under the requirements of everyone involved in innovation. According the view of this paper, it is feasible and necessary to build everyone involved in innovation problem solving process under Total Innovation Management (TIM) based on the Theory of Inventive Problem Solving (TRIZ). The tools under the CAI technology: How TO mode and science effects database could be very useful for all employee especially non-technical department and bottom line for innovation. The problem solving process put forward in the paper focus on non-technical department personnel especially bottom line employee for innovation.

The importance of scientific literacy to OCRWM's mission

DOE Office of Scientific and Technical Information (OSTI.GOV)

King, G.P.

1990-01-01

The US Department of Energy's (DOE) Office of Civilian Radioactive Waste Management (CRWM) has the unique mission of finding a permanent solution to the nation's high-level radioactive waste management problems. This paper explores a vital question: will OCRWM have sufficient scientific and technical resources as well as a sufficient level of public support to carry out its mission An affirmative answer to this question will require that adequate numbers of science and engineering students enter the field of radioactive waste management and that overall scientific literacy also be enhanced. This paper outlines current activities and programs within DOE and OCRWMmore » to increase scientific literacy and to recruit and develop scientists and engineers. While this paper offers only a summary inspection of the issues surrounding the solution of developing and maintaining the human technical capabilities to carry forth OCRWM's mission, it is meant to initiate a continuing examination by the American Nuclear Society, DOE, and professional and technical societies of fundamental scientific education issues.« less

Numerical Arc Segmentation Algorithm for a Radio Conference-NASARC (version 4.0) technical manual

NASA Technical Reports Server (NTRS)

Whyte, Wayne A., Jr.; Heyward, Ann O.; Ponchak, Denise S.; Spence, Rodney L.; Zuzek, John E.

1988-01-01

The information contained in the NASARC (Version 4.0) Technical Manual and NASARC (Version 4.0) User's Manual relates to the Numerical Arc Segmentation Algorithm for a Radio Conference (NASARC) software development through November 1, 1988. The Technical Manual describes the NASARC concept and the algorithms used to implement the concept. The User's Manual provides information on computer system considerations, installation instructions, description of input files, and program operation instructions. Significant revisions were incorporated in the Version 4.0 software over prior versions. These revisions have further enhanced the modeling capabilities of the NASARC procedure and provide improved arrangements of predetermined arcs within the geostationary orbits. Array dimensions within the software were structured to fit within the currently available 12 megabyte memory capacity of the International Frequency Registration Board (IFRB) computer facility. A piecewise approach to predetermined arc generation in NASARC (Version 4.0) allows worldwide planning problem scenarios to be accommodated within computer run time and memory constraints with enhanced likelihood and ease of solution.

Review of problems in the small-scale farm production of ethanol

DOE Office of Scientific and Technical Information (OSTI.GOV)

White, H.M.

1983-07-01

This report reviews the current status of small, farmer-operated ethanol production facilities. The characteristics and operating problems associated with present plants are reviewed with respect to technical, economic, and institutional issues. Information was obtained from recent publications and numerous telephone calls to state and federal officials and the producers themselves. It is concluded that, in most parts of the country, small-scale alcohol production has been reduced to relatively few farm plants, due primarily to several unfavorable economic factors. While both large and small facilities have been squeezed by rising feedstock costs and lower alcohol selling prices, the farmer-producer is burdenedmore » by additional constraints because of the small scale of his operations. It is not usually profitable for him to recover all the valuable by-products from the feedstock, such as gluten, corn oil, and carbon dioxide from corn conversion. He may not be able to use or market the wet alcohol and stillage he produces. Other difficulties often include high fuel costs, lack of financial and technical assistance, and excessive labor requirements.« less

Final report for LDRD project 11-0029 : high-interest event detection in large-scale multi-modal data sets : proof of concept.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rohrer, Brandon Robinson

2011-09-01

Events of interest to data analysts are sometimes difficult to characterize in detail. Rather, they consist of anomalies, events that are unpredicted, unusual, or otherwise incongruent. The purpose of this LDRD was to test the hypothesis that a biologically-inspired anomaly detection algorithm could be used to detect contextual, multi-modal anomalies. There currently is no other solution to this problem, but the existence of a solution would have a great national security impact. The technical focus of this research was the application of a brain-emulating cognition and control architecture (BECCA) to the problem of anomaly detection. One aspect of BECCA inmore » particular was discovered to be critical to improved anomaly detection capabilities: it's feature creator. During the course of this project the feature creator was developed and tested against multiple data types. Development direction was drawn from psychological and neurophysiological measurements. Major technical achievements include the creation of hierarchical feature sets created from both audio and imagery data.« less

Ancient dna from pleistocene fossils: Preservation, recovery, and utility of ancient genetic information for quaternary research

NASA Astrophysics Data System (ADS)

Yang, Hong

Until recently, recovery and analysis of genetic information encoded in ancient DNA sequences from Pleistocene fossils were impossible. Recent advances in molecular biology offered technical tools to obtain ancient DNA sequences from well-preserved Quaternary fossils and opened the possibilities to directly study genetic changes in fossil species to address various biological and paleontological questions. Ancient DNA studies involving Pleistocene fossil material and ancient DNA degradation and preservation in Quaternary deposits are reviewed. The molecular technology applied to isolate, amplify, and sequence ancient DNA is also presented. Authentication of ancient DNA sequences and technical problems associated with modern and ancient DNA contamination are discussed. As illustrated in recent studies on ancient DNA from proboscideans, it is apparent that fossil DNA sequence data can shed light on many aspects of Quaternary research such as systematics and phylogeny. conservation biology, evolutionary theory, molecular taphonomy, and forensic sciences. Improvement of molecular techniques and a better understanding of DNA degradation during fossilization are likely to build on current strengths and to overcome existing problems, making fossil DNA data a unique source of information for Quaternary scientists.

Indigence and access to health care in sub-Saharan Africa.

PubMed

Stierle, F; Kaddar, M; Tchicaya, A; Schmidt-Ehry, B

1999-01-01

Access to health care services for the poor and indigent is hampered by current policies of health care financing in sub-Saharan Africa. This paper reviews the issue as it is discussed in the international literature. No real strategies seem to exist for covering the health care of the indigent. Frequently, definitions of poverty and indigence are imprecise, the assessment of indigence is difficult for conceptual and technical reasons, and, therefore, the actual extent of indigence in Africa is not well known. Explicit policies rarely exist, and systematic evaluation of experiences is scarce. Results in terms of adequately identifying the indigent, and of mechanisms to improve indigents' access to health care, are rather deceiving. Policies to reduce poverty, and improve indigents' access to health care, seem to pursue strategies of depoliticizing the issue of social injustice and inequities. The problem is treated in a 'technical' manner, identifying and implementing 'operational' measures of social assistance. This approach, however, cannot resolve the problem of social exclusion, and, consequently, the problem of excluding large parts of African populations from modern health care. Therefore, this approach has to be integrated into a more 'political' approach which is interested in the process of impoverishment, and which addresses the macro-economic and social causes of poverty and inequity.

Suggested criteria for evaluating systems engineering methodologies

NASA Technical Reports Server (NTRS)

Gates, Audrey; Paul, Arthur S.; Gill, Tepper L.

1989-01-01

Systems engineering is the application of mathematical and scientific principles to practical ends in the life-cycle of a system. A methodology for systems engineering is a carefully developed, relatively complex procedure or process for applying these mathematical and scientific principles. There are many systems engineering methodologies (or possibly many versions of a few methodologies) currently in use in government and industry. These methodologies are usually designed to meet the needs of a particular organization. It has been observed, however, that many technical and non-technical problems arise when inadequate systems engineering methodologies are applied by organizations to their systems development projects. Various criteria for evaluating systems engineering methodologies are discussed. Such criteria are developed to assist methodology-users in identifying and selecting methodologies that best fit the needs of the organization.

Software Safety Risk in Legacy Safety-Critical Computer Systems

NASA Technical Reports Server (NTRS)

Hill, Janice L.; Baggs, Rhoda

2007-01-01

Safety Standards contain technical and process-oriented safety requirements. Technical requirements are those such as "must work" and "must not work" functions in the system. Process-Oriented requirements are software engineering and safety management process requirements. Address the system perspective and some cover just software in the system > NASA-STD-8719.13B Software Safety Standard is the current standard of interest. NASA programs/projects will have their own set of safety requirements derived from the standard. Safety Cases: a) Documented demonstration that a system complies with the specified safety requirements. b) Evidence is gathered on the integrity of the system and put forward as an argued case. [Gardener (ed.)] c) Problems occur when trying to meet safety standards, and thus make retrospective safety cases, in legacy safety-critical computer systems.

Airborne Wind Shear Detection and Warning Systems. Second Combined Manufacturers' and Technologists' Conference, part 1

NASA Technical Reports Server (NTRS)

Spady, Amos A., Jr. (Compiler); Bowles, Roland L. (Compiler); Schlickenmaier, Herbert (Compiler)

1990-01-01

The Second Combined Manufacturers' and Technologists' Conference hosted jointly by NASA Langley (LaRC) and the Federal Aviation Administration (FAA) was held in Williamsburg, Virginia, on October 18 to 20, 1988. The purpose of the meeting was to transfer significant, ongoing results gained during the second year of the joint NASA/FAA Airborne Wind Shear Program to the technical industry and to pose problems of current concern to the combined group. It also provided a forum for manufacturers to review forward-look technology concepts and for technologists to gain an understanding of the problems encountered by the manufacturers during the development of airborne equipment and the FAA certification requirements.

Strategies for maintaining patient privacy in i2b2.

PubMed

Murphy, Shawn N; Gainer, Vivian; Mendis, Michael; Churchill, Susanne; Kohane, Isaac

2011-12-01

The re-use of patient data from electronic healthcare record systems can provide tremendous benefits for clinical research, but measures to protect patient privacy while utilizing these records have many challenges. Some of these challenges arise from a misperception that the problem should be solved technically when actually the problem needs a holistic solution. The authors' experience with informatics for integrating biology and the bedside (i2b2) use cases indicates that the privacy of the patient should be considered on three fronts: technical de-identification of the data, trust in the researcher and the research, and the security of the underlying technical platforms. The security structure of i2b2 is implemented based on consideration of all three fronts. It has been supported with several use cases across the USA, resulting in five privacy categories of users that serve to protect the data while supporting the use cases. The i2b2 architecture is designed to provide consistency and faithfully implement these user privacy categories. These privacy categories help reflect the policy of both the Health Insurance Portability and Accountability Act and the provisions of the National Research Act of 1974, as embodied by current institutional review boards. By implementing a holistic approach to patient privacy solutions, i2b2 is able to help close the gap between principle and practice.

NASA/DOD Aerospace Knowledge Diffusion Research Project. Paper 36: Technical uncertainty as a correlate of information use by US industry-affiliated aerospace engineers and scientists

NASA Technical Reports Server (NTRS)

Pinelli, Thomas E.; Glassman, Nanci A.; Affelder, Linda O.; Hecht, Laura M.; Kennedy, John M.; Barclay, Rebecca O.

1994-01-01

This paper reports the results of an exploratory study that investigated the influence of technical uncertainty on the use of information and information sources by U.S. industry-affiliated aerospace engineers and scientists in completing or solving a project, task, or problem. Data were collected through a self-administered questionnaire. Survey participants were U.S. aerospace engineers and scientists whose names appeared on the Society of Automotive Engineers (SAE) mailing list. The results support the findings of previous research and the following study assumptions. Information and information-source use differ for projects, problems, and tasks with high and low technical uncertainty. As technical uncertainty increases, information-source use changes from internal to external and from informal to formal sources. As technical uncertainty increases, so too does the use of federally funded aerospace research and development (R&D). The use of formal information sources to learn about federally funded aerospace R&D differs for projects, problems, and tasks with high and low technical uncertainty.

Case study: use of problem-based learning to develop students' technical and professional skills

NASA Astrophysics Data System (ADS)

Warnock, James N.; Mohammadi-Aragh, M. Jean

2016-03-01

Problem-based learning (PBL) is a pedagogy that has attracted attention for many biomedical engineering curricula. The aim of the current study was to address the research question, 'Does PBL enable students to develop desirable professional engineering skills?' The desirable skills identified were communication, teamwork, problem solving and self-directed learning. Forty-seven students enrolled in a biomedical materials course participated in the case study. Students worked in teams to complete a series of problems throughout the semester. The results showed that students made significant improvements in their problem-solving skills, written communication and self-directed learning. Students also demonstrated an ability to work in teams and communicate orally. In conclusion, this case study provides empirical evidence of the efficacy of PBL on student learning. We discuss findings from our study and provide observations of student performance and perceptions that could be useful for faculty and researchers interested in PBL for biomedical engineering education.

Successful technical trading agents using genetic programming.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Othling, Andrew S.; Kelly, John A.; Pryor, Richard J.

2004-10-01

Genetic programming (GP) has proved to be a highly versatile and useful tool for identifying relationships in data for which a more precise theoretical construct is unavailable. In this project, we use a GP search to develop trading strategies for agent based economic models. These strategies use stock prices and technical indicators, such as the moving average convergence/divergence and various exponentially weighted moving averages, to generate buy and sell signals. We analyze the effect of complexity constraints on the strategies as well as the relative performance of various indicators. We also present innovations in the classical genetic programming algorithm thatmore » appear to improve convergence for this problem. Technical strategies developed by our GP algorithm can be used to control the behavior of agents in economic simulation packages, such as ASPEN-D, adding variety to the current market fundamentals approach. The exploitation of arbitrage opportunities by technical analysts may help increase the efficiency of the simulated stock market, as it does in the real world. By improving the behavior of simulated stock markets, we can better estimate the effects of shocks to the economy due to terrorism or natural disasters.« less

Technical assistance for law-enforcement communications: Case study report

NASA Technical Reports Server (NTRS)

Reilly, N. B.; Mustain, J. A.

1979-01-01

Methods developed to improve police communications systems are described. Use of queueing analysis shows several ways of improving time of response to inquiries made from the field for license plate checks and for information on current wants and warrants, through a state multiple switcher network. Design criteria for more efficient centralized switching equipment are developed. A message load problem experienced in a dispatch center is analyzed, showing that communications could be improved by adding communications channels, not by adding people.

Advances in the Theory of Complex Networks

NASA Astrophysics Data System (ADS)

Peruani, Fernando

An exhaustive and comprehensive review on the theory of complex networks would imply nowadays a titanic task, and it would result in a lengthy work containing plenty of technical details of arguable relevance. Instead, this chapter addresses very briefly the ABC of complex network theory, visiting only the hallmarks of the theoretical founding, to finally focus on two of the most interesting and promising current research problems: the study of dynamical processes on transportation networks and the identification of communities in complex networks.

Feasibility Study of Food Waste Co-Digestion at U.S. Army Installations

DTIC Science & Technology

2017-03-01

systems, • energy take off, • gas flare, and • gas generator sets or turbines . Costs for individual items outlined in Table 5 were collected from...unlike other forms of renewables such as wind or solar. In addition, biogas—a product of the AD process—is a versatile energy resource that can be...Huachuca DPW. San Diego, CA: All Star Technical Services. Arsova, L. May 2010. Anaerobic Digestion of Food Waste: Current Status, Problems , and an

Broadsheet number 57: problems in fine needle biopsy of the thyroid.

PubMed

Orell, S R; Philips, J

2000-08-01

The role of fine needle biopsy and cytological diagnosis in the preoperative evaluation of thyroid nodules is reviewed on the basis of the current literature as well as the authors' personal experience. Technical aspects and guidelines for reporting thyroid samples are discussed in some detail. The main emphasis is on diagnostic pitfalls, those which may lead to a false-negative diagnosis, to a false-positive diagnosis or to an erroneous typing of the lesion, and their cytological patterns are described.

Systems Design and Pilot Operation of a Regional Center for Technical Processing for the Libraries of the New England State Universities. NELINET, New England Library Information Network. Progress Report, July 1, 1967 - March 30, 1968, Volume II, Appendices.

ERIC Educational Resources Information Center

Agenbroad, James E.; And Others

Included in this volume of appendices to LI 000 979 are acquisitions flow charts; a current operations questionnaire; an algorithm for splitting the Library of Congress call number; analysis of the Machine-Readable Cataloging (MARC II) format; production problems and decisions; operating procedures for information transmittal in the New England…

The environmental analysis of helicopter operations by Federal agencies: Current procedures and research needs

NASA Technical Reports Server (NTRS)

Smith, C. C.; Warner, D. B.; Dajani, J. S.

1977-01-01

The technical, economic, and environmental problems restricting commercial helicopter passenger operations are reviewed. The key considerations for effective assessment procedures are outlined and a preliminary model for the environmental analysis of helicopters is developed. It is recommended that this model, or some similar approach, be used as a common base for the development of comprehensive environmental assessment methods for each of the federal agencies concerned with helicopters. A description of the critical environmental research issues applicable to helicopters is also presented.

Psychological issues relevant to astronaut selection for long-duration space flight: a review of the literature.

PubMed

Collins, Daniel L

2003-01-01

This technical paper reviews the current literature on psychological issues relevant to astronaut selection for long-duration space flights. Interpersonal problems have been and remain a recurring problem for both short and long-duration space flights. Even after completion of the space mission, intense psychological aftereffects are reported. The specific behavioral problems experienced during United States and Soviet Union space flights are reviewed, specifically addressing contentious episodes and impaired judgments that occurred during the Mercury, Apollo, and Skylab missions. Psychological tests used in the selection process for the space program have focused primarily on the detection of gross psychopathologies in potential candidates. Although these psychological instruments excluded some people from becoming astronauts, the battery of tests failed to predict which individuals would manifest behavioral aberrations in judgment, cooperative functioning, overt irritability, or destructive interpersonal actions.

Installation of solar PV systems in Sri Lanka

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fernando, M.P.T.P.

1995-10-01

The tropical country of Sri Lanka has hydroelectric power plants sufficient to provide electricity to only 40% of its 25,000 villages. The electric power needs of the average Sri Lankan rural communities are basic: three or four lights to illuminate their house and a power supply for their televisions. Solar radiation is abundant throughout the year. To take advantage of this resource, the Sarvodaya Rural Technical Services launched a Solar PV pilot demonstration project in the rural areas not served by the electric grid. The systems were being installed on an individual residence basis and funded by loans. Social andmore » cultural problems which have arisen during the course of the project have slowed its implementation. This study identifies the problems and makes recommendations to resolve the current problems and avoid new ones.« less

Expressive/Exploratory Technical Writing (XTW) in Engineering: Shifting the Technical Writing Curriculum

ERIC Educational Resources Information Center

Warnock, Scott; Kahn, Michael

2007-01-01

While the importance of "expressive writing," or informal, self-directed writing, has been well established, teachers underutilize it, particularly in technical writing courses. We introduce the term expressive/exploratory technical writing (XTW), which is the use of informal, self-directed writing to problem-solve in technical fields. We describe…

Vocational-Technical Education Financial Study. Executive Summary.

ERIC Educational Resources Information Center

Indiana State Board of Vocational and Technical Education, Indianapolis.

A review of Indiana's current system of financing public vocational-technical education was limited to these concerns: the resource needs of vocational-technical education to keep the current delivery system up-to-date and the resources necessary to expand vocational-technical education services to those not being served. Although the current…

Teamwork and error in the operating room: analysis of skills and roles.

PubMed

Catchpole, K; Mishra, A; Handa, A; McCulloch, P

2008-04-01

To analyze the effects of surgical, anesthetic, and nursing teamwork skills on technical outcomes. The value of team skills in reducing adverse events in the operating room is presently receiving considerable attention. Current work has not yet identified in detail how the teamwork and communication skills of surgeons, anesthetists, and nurses affect the course of an operation. Twenty-six laparoscopic cholecystectomies and 22 carotid endarterectomies were studied using direct observation methods. For each operation, teams' skills were scored for the whole team, and for nursing, surgical, and anesthetic subteams on 4 dimensions (leadership and management [LM]; teamwork and cooperation; problem solving and decision making; and situation awareness). Operating time, errors in surgical technique, and other procedural problems and errors were measured as outcome parameters for each operation. The relationships between teamwork scores and these outcome parameters within each operation were examined using analysis of variance and linear regression. Surgical (F(2,42) = 3.32, P = 0.046) and anesthetic (F(2,42) = 3.26, P = 0.048) LM had significant but opposite relationships with operating time in each operation: operating time increased significantly with higher anesthetic but decreased with higher surgical LM scores. Errors in surgical technique had a strong association with surgical situation awareness (F(2,42) = 7.93, P < 0.001) in each operation. Other procedural problems and errors were related to the intraoperative LM skills of the nurses (F(5,1) = 3.96, P = 0.027). Detailed analysis of team interactions and dimensions is feasible and valuable, yielding important insights into relationships between nontechnical skills, technical performance, and operative duration. These results support the concept that interventions designed to improve teamwork and communication may have beneficial effects on technical performance and patient outcome.

Technical writing versus technical writing

NASA Technical Reports Server (NTRS)

Dillingham, J. W.

1981-01-01

Two terms, two job categories, 'technical writer' and 'technical author' are discussed in terms of industrial and business requirements and standards. A distinction between 'technical writing' and technical 'writing' is made. The term 'technical editor' is also considered. Problems inherent in the design of programs to prepare and train students for these jobs are discussed. A closer alliance between industry and academia is suggested as a means of preparing students with competent technical communication skills (especially writing and editing skills) and good technical skills.

32 CFR 203.12 - Technical assistance for public participation provider qualifications.

Code of Federal Regulations, 2010 CFR

2010-07-01

... waste problems. (2) Experience in making technical presentations. (3) Demonstrated writing skills. (4... 32 National Defense 2 2010-07-01 2010-07-01 false Technical assistance for public participation... THE SECRETARY OF DEFENSE (CONTINUED) MISCELLANEOUS TECHNICAL ASSISTANCE FOR PUBLIC PARTICIPATION (TAPP...

Technical documentation challenges in aviation maintenance : a proceedings report.

DOT National Transportation Integrated Search

2012-11-01

The 2012 Technical Documentation workshop addressed both problems and solutions associated with technical : documentation for maintenance. These issues are known to cause errors, rework, maintenance delays, other : safety hazards, and FAA administrat...

Proceedings of the NASA Conference on Space Telerobotics, volume 2

NASA Technical Reports Server (NTRS)

Rodriguez, Guillermo (Editor); Seraji, Homayoun (Editor)

1989-01-01

These proceedings contain papers presented at the NASA Conference on Space Telerobotics held in Pasadena, January 31 to February 2, 1989. The theme of the Conference was man-machine collaboration in space. The Conference provided a forum for researchers and engineers to exchange ideas on the research and development required for application of telerobotics technology to the space systems planned for the 1990s and beyond. The Conference: (1) provided a view of current NASA telerobotic research and development; (2) stimulated technical exchange on man-machine systems, manipulator control, machine sensing, machine intelligence, concurrent computation, and system architectures; and (3) identified important unsolved problems of current interest which can be dealt with by future research.

Tissue Doppler and strain imaging: anything left in the echo-lab?

PubMed Central

Citro, Rodolfo; Bossone, Eduardo; Kuersten, Bettina; Gregorio, Giovanni; Salustri, Alessandro

2008-01-01

Medline research indicates that an increasing number of manuscripts have been published in the last decade claiming, the feasibility and the potential clinical role of tissue Doppler and strain/strain rate imaging. However, despite this amount of scientific evidence, these technologies are still confined to dedicated, high-tech, research-oriented echocardiography laboratories. In this review we have critically evaluated these techniques, analysing their physical principles, the technical problems related to their current clinical application, and the future perspectives. Finally, this review explores the reasons why these technologies are still defined "new technologies" and the impact of their implementation on the current clinical activity of an echocardiography laboratory. PMID:18973677

Integrated Maintenance Information System (IMIS): A Maintenance Information Delivery Concept.

DTIC Science & Technology

1987-11-01

InterFace Figure 2. Portable Maintenance Computer Concept. provide advice for difficult fault-isolation problems . The technician will be able to accomplish...faced with an ever-growing number of paper-based technical orders (TOs). This has greatly increased costs and distribution problems . In addition, it has...compounded problems associ- ated with ensuring accurate data and the lengthy correction times involved. To improve the accuracy of technical data and

A system for respiratory motion detection using optical fibers embedded into textiles.

PubMed

D'Angelo, L T; Weber, S; Honda, Y; Thiel, T; Narbonneau, F; Luth, T C

2008-01-01

In this contribution, a first prototype for mobile respiratory motion detection using optical fibers embedded into textiles is presented. The developed system consists of a T-shirt with an integrated fiber sensor and a portable monitoring unit with a wireless communication link enabling the data analysis and visualization on a PC. A great effort is done worldwide to develop mobile solutions for health monitoring of vital signs for patients needing continuous medical care. Wearable, comfortable and smart textiles incorporating sensors are good approaches to solve this problem. In most of the cases, electrical sensors are integrated, showing significant limits such as for the monitoring of anaesthetized patients during Magnetic Resonance Imaging (MRI). OFSETH (Optical Fibre Embedded into technical Textile for Healthcare) uses optical sensor technologies to extend the current capabilities of medical technical textiles.

The Method of Immersion the Problem of Comparing Technical Objects in an Expert Shell in the Class of Artificial Intelligence Algorithms

NASA Astrophysics Data System (ADS)

Sergey Vasilievich, Buharin; Aleksandr Vladimirovich, Melnikov; Svetlana Nikolaevna, Chernyaeva; Lyudmila Anatolievna, Korobova

2017-08-01

The method of dip of the underlying computational problem of comparing technical object in an expert shell in the class of data mining methods is examined. An example of using the proposed method is given.

Cognitive Processes Embedded in Self-Explanations of Solving Technical Problems: Implications for Training

ERIC Educational Resources Information Center

Maughan, George R.

2007-01-01

This qualitative research examines the cognitive processes embedded in self-explanations of automobile and motorcycle service technicians performing troubleshooting tasks and solving technical problems. In-depth interviews were conducted with twelve service technicians who have obtained the designation of "master technician" or equivalent within…

Problems Relating to Examinations in Three-Year Technical/Natural Science Courses of Study at the Federal Armed Forces University, Munich.

ERIC Educational Resources Information Center

Ulbricht, Kurt; Zimmermann, Peter

1981-01-01

Problems encountered in testing in aerospace engineering courses in an accelerated technical program of a German military university are outlined. Four common grading procedures are compared, and the optimum length of written tests is discussed. (MSE)

Final Technical Report - SciDAC Cooperative Agreement: Center for Wave Interactions with Magnetohydrodynamics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schnack, Dalton D.

Final technical report for research performed by Dr. Thomas G. Jenkins in collaboration with Professor Dalton D. Schnack on SciDAC Cooperative Agreement: Center for Wave Interactions with Magnetohydrodyanics, DE-FC02-06ER54899, for the period of 8/15/06 - 8/14/11. This report centers on the Slow MHD physics campaign work performed by Dr. Jenkins while at UW-Madison and then at Tech-X Corporation. To make progress on the problem of RF induced currents affect magnetic island evolution in toroidal plasmas, a set of research approaches are outlined. Three approaches can be addressed in parallel. These are: (1) Analytically prescribed additional term in Ohm's law tomore » model the effect of localized ECCD current drive; (2) Introduce an additional evolution equation for the Ohm's law source term. Establish a RF source 'box' where information from the RF code couples to the fluid evolution; and (3) Carry out a more rigorous analytic calculation treating the additional RF terms in a closure problem. These approaches rely on the necessity of reinvigorating the computation modeling efforts of resistive and neoclassical tearing modes with present day versions of the numerical tools. For the RF community, the relevant action item is - RF ray tracing codes need to be modified so that general three-dimensional spatial information can be obtained. Further, interface efforts between the two codes require work as well as an assessment as to the numerical stability properties of the procedures to be used.« less

Municipal solid waste management in Phnom Penh, capital city of Cambodia.

PubMed

Seng, Bunrith; Kaneko, Hidehiro; Hirayama, Kimiaki; Katayama-Hirayama, Keiko

2011-05-01

This paper presents an overview of municipal solid waste management (MSWM) for both technical and regulatory arrangements in the municipality of Phnom Penh (MPP), Cambodia. Problems with the current MSWM are identified, and challenges and recommendations for future improvement are also given in this paper. MPP is a small city with a total area of approximately 374 km(2) and an urban population of about 1.3 million in 2008. For the last 14 years, average annual municipal solid waste (MSW) generated in MPP has increased rapidly from 0.136 million tons in 1995 to 0.361 million tons in 2008. The gross generation rate of MSW per capita was 0.74 kg day(-1). However, the per capita household waste generation was 0.487 kg day(- 1). At 63.3%, food waste is the predominant portion of generated waste, followed by plastics (15.5%), grass and wood (6.8%), and paper and cardboard (6.4%). The remaining waste, including metals, glass, rubber/leather, textiles, and ceramic/ stone, accounted for less than 3%. Waste recycling through informal sectors is very active; recycled waste accounted for about 9.3% of all waste generated in 2003. Currently, the overall technical arrangement, including storage and discharge, collection and transport, and disposal, is still in poor condition, which leads to environmental and health risks. These problems should be solved by improving legislation, environmental education, solid waste management facilities, and management of the waste scavengers.

Evaluation of Flight Attendant Technical Knowledge

NASA Technical Reports Server (NTRS)

Dunbar, Melisa G.; Chute, Rebecca D.; Rosekind, Mark (Technical Monitor)

1997-01-01

Accident and incident reports have indicated that flight attendants have numerous opportunities to provide the flight-deck crew with operational information that may prevent or lessen the severity of a potential problem. Additionally, as carrier fleets transition from three person to two person flight-deck crews, the reliance upon the cabin crew for the transfer of this information may increase further. Recent research indicates that flight attendants do not feel confident in their ability to describe mechanical parts or malfunctions of the aircraft, and the lack of flight attendant technical training has been referenced in a number of recent reports. Chute and Wiener describe five factors which may produce communication barriers between cockpit and cabin crews: the historical background of aviation, the physical separation of the two crews, psychosocial issues, regulatory factors, and organizational factors. By examining these areas of division we can identify possible bridges and address the implications of deficient cockpit/cabin communication on flight safety. Flight attendant operational knowledge may provide some mitigation of these barriers. The present study explored both flight attendant technical knowledge and flight attendant and pilot expectations of flight attendant technical knowledge. To assess the technical knowledge of cabin crewmembers, 177 current flight attendants from two U.S. carriers voluntarily completed a 13-item technical quiz. To investigate expectations of flight attendant technical knowledge, 181 pilots and a second sample of 96 flight attendants, from the same two airlines, completed surveys designed to capture each group's expectations of operational knowledge required of flight attendants. Analyses revealed several discrepancies between the present level of flight attendant operational knowledge and pilots' and flight attendants' expected and desired levels of technical knowledge. Implications for training will be discussed.

Delaware GK-12: Improvement of Science Education in Vocational Technical High Schools Through Collaborative Learning and Coteaching

NASA Astrophysics Data System (ADS)

Madsen, J.; Skalak, K.; Watson, G.; Scantlebury, K.; Allen, D.; Quillen, A.

2006-12-01

With funding from the National Science Foundation, the University of Delaware (UD) in partnership with the New Castle County Vocational Technical School District (NCCoVoTech) in Delaware has initiated a GK-12 Program. In each of year this program, nine full time UD graduate students in the sciences, who have completed all or most of their coursework, will be selected to serve as fellows. Participation in the GK-12 program benefits the graduate fellows in many ways. In addition to gaining general insight into current issues of science education, the fellows enhance their experience as scientific researchers by directly improving their ability to effectively communicate complex quantitative and technical knowledge to an audience with multiple and diverse learning needs. In the first year of this project, fellows have been paired with high school science teachers from NCCoVoTech. These pairs, along with the principal investigators (PIs) of this program have formed a learning community that is taking this opportunity to examine and to reflect on current issues in science education while specifically addressing critical needs in teaching science in vocational technical high schools. By participating in summer workshops and follow-up meetings facilitated by the PIs, the fellows have been introduced to a number of innovative teaching strategies including problem-based learning (PBL). Fellow/teacher pairs have begun to develop and teach PBL activities that are in agreement with State of Delaware science standards and that support student learning through inquiry. Fellows also have the opportunity to engage in coteaching with their teacher partner. In this "teaching at the elbow of another", fellows will gain a better understanding of and appreciation for the complexities and nuances of teaching science in vocational technical high schools. While not taught as a stand-alone course in NCCoVoTech high schools, earth science topics are integrated into the science curriculum at nearly all levels from the freshman through the senior year. Three of the current group of nine fellows are engaged in Ph.D.-level research within the disciplines of astronomy and hydrology. They will bring this expertise into their collaboration with their practicing teachers with the goal of improving the understanding of earth science topics by high school students within a vocational technical school setting.

The composing process in technical communication

NASA Technical Reports Server (NTRS)

Masse, R. E.

1981-01-01

The theory and application of the composing process in technical communications is addressed. The composing process of engineers, some implications for composing research for the teaching and research of technical communication, and an interpretation of the processes as creative experience are also discussed. Two areas of technical communications summarized concern: the rhetorical features of technical communications, and the theoretical background for a process-based view, a problem-solving approach to technical writing.

Predictors of employer satisfaction: technical and non-technical skills.

PubMed

Danielson, Jared A; Wu, Tsui-Feng; Fales-Williams, Amanda J; Kirk, Ryan A; Preast, Vanessa A

2012-01-01

Employers of 2007-2009 graduates from Iowa State University College of Veterinary Medicine were asked to respond to a survey regarding their overall satisfaction with their new employees as well as their new employees' preparation in several technical and non-technical skill areas. Seventy-five responses contained complete data and were used in the analysis. Four technical skill areas (data collection, data interpretation, planning, and taking action) and five non-technical skill areas (interpersonal skills, ability to deal with legal issues, business skills, making referrals, and problem solving) were identified. All of the skill area subscales listed above had appropriate reliability (Cronbach's alpha>0.70) and were positively and significantly correlated with overall employer satisfaction. Results of two simultaneous regression analyses indicated that of the four technical skill areas, taking action is the most salient predictor of employer satisfaction. Of the five non-technical skill areas, interpersonal skills, business skills, making referrals, and problem solving were the most important skills in predicting employer satisfaction. Hierarchical regression analysis revealed that all technical skills explained 25% of the variation in employer satisfaction; non-technical skills explained an additional 42% of the variation in employer satisfaction.

Mathematical formula recognition using graph grammar

NASA Astrophysics Data System (ADS)

Lavirotte, Stephane; Pottier, Loic

1998-04-01

This paper describes current results of Ofr, a system for extracting and understanding mathematical expressions in documents. Such a tool could be really useful to be able to re-use knowledge in scientific books which are not available in electronic form. We currently also study use of this system for direct input of formulas with a graphical tablet for computer algebra system softwares. Existing solutions for mathematical recognition have problems to analyze 2D expressions like vectors and matrices. This is because they often try to use extended classical grammar to analyze formulas, relatively to baseline. But a lot of mathematical notations do not respect rules for such a parsing and that is the reason why they fail to extend text parsing technic. We investigate graph grammar and graph rewriting as a solution to recognize 2D mathematical notations. Graph grammar provide a powerful formalism to describe structural manipulations of multi-dimensional data. The main two problems to solve are ambiguities between rules of grammar and construction of graph.

Managing scientific complexity in public policy: the case of U.S. climate change legislation in the 111th Congress

NASA Astrophysics Data System (ADS)

Mueller, J. A.; Runci, P. J.

2009-12-01

The recent passage of the American Climate and Energy Security Act by the U.S. House of Representatives in June of this year was a landmark in U.S. efforts to move climate change legislation through Congress. Although an historic achievement, the bill (and surrounding debate) highlights many concerns about the processes by which lawmakers and the public inform themselves about scientifically relevant problems and, subsequently, by which policy responses are crafted in a context of complexity, uncertainty, and competition for resources and attention. In light of the ever-increasing specialization of expertise in the sciences and other technical fields, and the inherent complexity of scientifically relevant problems such as climate change, society faces significant hurdles in its efforts to integrate knowledge and develop sufficient understanding of these problems to which it must respond with legislation or other effective collective or individual action. The emergence of a new class of experts who act as science-policy brokers may not be sufficient to cross these hurdles. Herein, we explore how society and the scientific community in particular can work toward closing the ever-growing gap between technical knowledge and society’s ability to comprehend and use it. Both authors are currently legislative fellows working on energy and climate change issues in the U.S. Senate.

Some technical writing skills industry needs

NASA Technical Reports Server (NTRS)

Smith, F. R.

1981-01-01

It is suggested that engineers and other technical students be taught three classes of skills in technical writing. First, "Big Picture Things", which includes: the importance of clear writing, the wide scope of writing, the wide scope of writing tasks that will be faced in industry, and the principles of organization of technical materials such as; how to analyze, classify, partition, and interpret. Second, "Writing Procedures", which encompasses: how to get words on paper efficiently and team-write. Third, "Writing Details", in which two considerations are important: how to achieve precision in the use of language and the aspects of style. Three problems in style are cited: the problem of sentence transition, overuse of attributive adjectives, and verbosity in paragraph structure. The most important thing in technical writing is considered to be functionality, economy and clarity.

Sixth SIAM conference on applied linear algebra: Final program and abstracts. Final technical report

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1997-12-31

Linear algebra plays a central role in mathematics and applications. The analysis and solution of problems from an amazingly wide variety of disciplines depend on the theory and computational techniques of linear algebra. In turn, the diversity of disciplines depending on linear algebra also serves to focus and shape its development. Some problems have special properties (numerical, structural) that can be exploited. Some are simply so large that conventional approaches are impractical. New computer architectures motivate new algorithms, and fresh ways to look at old ones. The pervasive nature of linear algebra in analyzing and solving problems means that peoplemore » from a wide spectrum--universities, industrial and government laboratories, financial institutions, and many others--share an interest in current developments in linear algebra. This conference aims to bring them together for their mutual benefit. Abstracts of papers presented are included.« less

Swelling soils in the road structures

NASA Astrophysics Data System (ADS)

Pruška, Jan; Šedivý, Miroslav

2017-09-01

There are frequent problems with the soil swelling in the road construction in the past time. This phenomenon is known for decades. This situation is notably given by insufficient knowledge of this problem and difficulties with input parameters describing the swelling process. The paper in the first part proposed regression relations to predict swelling pressure, time of swelling and swelling strain for different initial water contents for soils and improvement soils. The relations were developed by using artificial neural network and QCExpert Professional software (on the data from site investigations by GeoTec-GS, a.s. and experimental data from CTU in Prague). The advantage of the relations is based on using the results of the basic soil tests (plasticity index, consistency index and colloidal activity) as input parameters. The authors inform the technical public with their current knowledge of the problems with the soil swelling on the motorway in the second part of the paper.

Some Characteristics and Writing Problems of Technically Oriented Students.

ERIC Educational Resources Information Center

Ruehr, Ruthann

An understanding of the writing problems and personalities of some of the technically oriented students at Michigan Technological University may help others who teach similar students. Although their scores on aptitude tests are high, these students have had very little experience in writing. In addition, the majority of the students have had very…

Approaches to Technological Update of Vocational/Technical Teachers.

ERIC Educational Resources Information Center

Hamilton, James B.; McElroy, Jack

As part of an effort to address the problem of the technological update of vocational and technical teachers, the National Center for Research in Vocational Education conducted a status study to determine the nature and extent of the problem with respect to institutional level and occupational area. A second aspect of the study dealt with…

The Office of Technology Development technical reports. A bibliography

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1994-09-01

The US Department of Energy`s Office of Technology Development (OTD) within the Office of Environmental Management was established in 1989 to conduct an aggressive national program of applied research, development, demonstration, testing, and evaluation (RDDT&E) for innovative environmental cleanup solutions that are safer and more time- and cost-effective than those currently available. In many cases, the development of new technology presents the best hope for ensuring a substantive reduction in risk to the environment and improved worker/public safety within realistic financial constraints. Five major remediation and waste management problem areas have been identified to date within the DOE weapons complex;more » Contaminant Plume Containment and Remediation; Mixed Waste Characterization, Treatment, and Disposal; High-Level Waste Tank Remediation; Landfill Stabilization; and Facility Transitioning, Decommissioning, and Final Disposition. New technologies to address these problem areas are demonstrated to the point that they are proven to work and that they can be transferred to the private sector end-users. This bibliography contains information on scientific and technical reports sponsored by the Office of Environmental Management from its inception in 1989 through June 1994. Future issues contain reports from Technology Development activities and will be published biannually.« less

Standardizing practices: a socio-history of experimental systems in classical genetic and virological cancer research, ca. 1920-1978.

PubMed

Fujimura, J H

1996-01-01

This paper presents a narrative history of technologies in cancer research circa 1920-1978 and a theoretical perspective on the complex, intertwined relationships between scientific problems, material practices and technologies, concepts and theories, and other historical circumstances. The history presents several active lines of research and technology development in the genetics of cancer in the United States which were constitutive of proto-oncogene work in its current form. I write this history from the perspective of technology development. Scientists participating in cancer research created tools with which to study their problems of interest, but the development of the tools also influenced the questions asked and answered in the form of concepts and theories developed. These tools included genetic ideas of the 1920s, inbred mouse colonies, chemicals and antibiotics developed during World War Two, tissue cultures and their technical procedures, and viruses. I examine these tools as standardized experimental systems that standardized materials as well as practices in laboratories. Inbred animals, tissue culture materials and methods, and tumor viruses as experimental systems gave materiality to "genes' and "cancer'. They are technical-natural objects that stand-in for nature in the laboratory.

Conversations with Technical Writing Teachers: Defining a Problem.

ERIC Educational Resources Information Center

Selting, Bonita R.

2002-01-01

Considers if teaching technology is problematic for technical writing instructors. Presents ideas of 64 Association of Teachers of Technical Writing (ATTW) members who were queried on their roles as teachers of technical writing in relation to the demands made upon them to also be teachers of technology skills. Concludes with a call for more…

[Testing and commercialization of a cotton stalk shredder and plow]. Technical progress report, October--December 1995

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thacker, G.W.

1996-01-27

This quarterly report describes work on Task 1: Field test and sell prototype to Ellis Equipment, Ltd; Task 2: Design, build, and field test two prototypes; and Task 3: Produce and sell Pegasus to farmers. The equipment has been built to shred stalks, deeply till the soil, and prepare seedbeds for cotton plants. The equipment has been field tested in Australia and is currently being field tested in California and Arizona. Unexpected problems appeared with hard dry soils and this report describes improvements made.

Territorial energy assessment. Phase I

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1981-07-31

The goal of the project is to provide a current perspective on territorial energy problems, to identify existing energy supply and demand data, and to identify energy resources that might be developed and appropriate technology options. The cost of the technical assessment and economic analysis activities required to support the development of specific energy plans is defined and estimated. Information is summarized for the US Territories, the Pacific Trust Territories, and Puerto Rico. An overview and analysis of the the Pacific Island Entities; profiles of the Pacifc Island Entities; and the Caribbean Island Entities are presented. (MCW)

Verification approach for the Shuttle/Payload Contamination Evaluation computer program - Spacelab induced environment

NASA Technical Reports Server (NTRS)

Bareiss, L. E.

1978-01-01

The paper presents a compilation of the results of a systems level Shuttle/payload contamination analysis and related computer modeling activities. The current technical assessment of the contamination problems anticipated during the Spacelab program are discussed and recommendations are presented on contamination abatement designs and operational procedures based on experience gained in the field of contamination analysis and assessment, dating back to the pre-Skylab era. The ultimate test of the Shuttle/Payload Contamination Evaluation program will be through comparison of predictions with measured levels of contamination during actual flight.

Antenna pointing mechanism for ESA ENVISAT polar platform

NASA Technical Reports Server (NTRS)

Serrano, J.; SanMillan, J.; Santiago, R.

1996-01-01

INTA is currently developing a two-degree-of-freedom antenna pointing mechanism (APM) as part of the ESA ENVISAT POLAR PLATFORM (PPF) program. This mechanism will drive a Ka-band antenna within the Data-Relay Satellite System (DRS) on board the Polar Platform satellite. The first mission using PPF is ENVISAT, which is expected to be flown in 1998. This paper describes the main requirements, design, and test results of this pointing system, as well as the main technical problems from customer requirements and how those have been faced to achieve a final design.

SUGAR: graphical user interface-based data refiner for high-throughput DNA sequencing.

PubMed

Sato, Yukuto; Kojima, Kaname; Nariai, Naoki; Yamaguchi-Kabata, Yumi; Kawai, Yosuke; Takahashi, Mamoru; Mimori, Takahiro; Nagasaki, Masao

2014-08-08

Next-generation sequencers (NGSs) have become one of the main tools for current biology. To obtain useful insights from the NGS data, it is essential to control low-quality portions of the data affected by technical errors such as air bubbles in sequencing fluidics. We develop a software SUGAR (subtile-based GUI-assisted refiner) which can handle ultra-high-throughput data with user-friendly graphical user interface (GUI) and interactive analysis capability. The SUGAR generates high-resolution quality heatmaps of the flowcell, enabling users to find possible signals of technical errors during the sequencing. The sequencing data generated from the error-affected regions of a flowcell can be selectively removed by automated analysis or GUI-assisted operations implemented in the SUGAR. The automated data-cleaning function based on sequence read quality (Phred) scores was applied to a public whole human genome sequencing data and we proved the overall mapping quality was improved. The detailed data evaluation and cleaning enabled by SUGAR would reduce technical problems in sequence read mapping, improving subsequent variant analysis that require high-quality sequence data and mapping results. Therefore, the software will be especially useful to control the quality of variant calls to the low population cells, e.g., cancers, in a sample with technical errors of sequencing procedures.

Giant step for communication satellite technology

NASA Technical Reports Server (NTRS)

Lovell, R. R.

1984-01-01

NASA's communications program, which is concerned with advanced communications technology, reflects the need for operational communications satellite capacity beyond the capabilities of current technology and the unwillingness of private industry in the U.S. to undertake making the required long-range, high-risk technology advances. It is pointed out that current satellites will not satisfy the forecasted demand for additional capacity in the 1990s and beyond. Current technology exists primarily up to 18 GHz. Designing a communications satellite at each of the three major uplink/downlink frequency bands (C, Ku, and Ka, 6/4 GHz, 14/11 GHz, and 30/20 GHz, respectively) presents different program management and technical problems. Increasing frequency or power can be done only by intensive sustained research. This is the rationale for NASA to pursue the Advanced Communications Technology Satellite (ACTS) program.

Giant step for communication satellite technology

NASA Astrophysics Data System (ADS)

Lovell, R. R.

1984-03-01

NASA's communications program, which is concerned with advanced communications technology, reflects the need for operational communications satellite capacity beyond the capabilities of current technology and the unwillingness of private industry in the U.S. to undertake making the required long-range, high-risk technology advances. It is pointed out that current satellites will not satisfy the forecasted demand for additional capacity in the 1990s and beyond. Current technology exists primarily up to 18 GHz. Designing a communications satellite at each of the three major uplink/downlink frequency bands (C, Ku, and Ka, 6/4 GHz, 14/11 GHz, and 30/20 GHz, respectively) presents different program management and technical problems. Increasing frequency or power can be done only by intensive sustained research. This is the rationale for NASA to pursue the Advanced Communications Technology Satellite (ACTS) program.

Whither ink jet? Current patent trends

NASA Astrophysics Data System (ADS)

Pond, Stephen F.; Karz, Robert S.

1995-04-01

The status and potential of ink jet technology is discernible in its major technical literature forum: worldwide patents. Most ink jet technical activity is focused in commercial research and development laboratories where proprietary considerations make patents the norm for publication. Currently there are about 2,000 ink jet disclosures issued annually with over 200 enterprises represented. Ink jet patent activity is increasing about 25% per year driven by a rapidly expanding base of products, applications, and revenue. An analysis of the ink jet patent literature reveals a few major themes (i.e. continuous ink jet, piezoelectric drop-on-demand, and thermal ink jet) and numerous minor ones (i.e. electrohydro-dynamic extraction, magnetic drop-on-demand, Hertz continuous, acoustic ink printing). Patents bear witness to transformations in the industry as dominant players of the 1970's have given way to new leaders in the 1990's. They also foretell important commercial developments in ink jet's near term future. When studied in aggregate, the patent record reveals patterns for the industry in general as well as for individual companies. It becomes possible to use the patent data base not only to identify technical approaches and problems for specific firms, but also to track progress and monitor changing strategies. In addition, international filing patterns can provide insights into industry priorities. This paper presents an overview of ink jet technology as revealed by the patent literature. It will include a 25 year perspective, a review of trends over the past five years, and a survey of today's most active companies and their technical approaches. With this analysis, it will be shown that the information inherent in the patent record is more than the sum of its individual disclosures. Indeed, by using it, we can outlook whither goes ink jet.

What We Know (and What We Don't Know) about Training of Cognitive Strategies for Technical Problem Solving.

ERIC Educational Resources Information Center

Foshay, Wellesley R.

The topic of teaching troubleshooting is examined as an example of the teaching of cognitive strategies for technical problem solving. The traditional behavioral approach to teaching troubleshooting has essentially been algorithmic. Recent cognitive research suggests an approach founded first on task analysis and characterized by: (1) analysis of…

Web Based Technical Problem Solving for Enhancing Writing Skills of Secondary Vocational Students

ERIC Educational Resources Information Center

Papantoniou, Eleni; Hadzilacos, Thanasis

2017-01-01

We discuss some aspects of a pilot e-learning technical writing course addressed to 11th grade vocational high school students in Greece. The application of this alternative teaching intervention stemmed from the researcher-instructor's reflections relating to the integration of a problem based e-pedagogy that aims not just to familiarize students…

Elements of Emotional Intelligence that Facilitate Exper-to-Peer Tacit Knowledge Transfer

ERIC Educational Resources Information Center

Berry, Catherine M.

2010-01-01

The purpose of this quantitative study was to compare the emotional intelligence competencies of a group of technical experts with high skills in problem-solving, leadership and mentoring (Group A) with a group of technical experts with lower skills in problem solving, leadership, and mentoring (Group B) at a semiconductor manufacturing factory in…

A technical platform for environments for ageing--lessons learned from three field studies.

PubMed

Eichelberg, Marco; Büsching, Felix; Steen, Enno-Edzard; Helmer, Axel; Thiel, Andreas; Hein, Andreas; Wolf, Lars

2014-01-01

The Lower Saxony Research Network "Design of Environments for Ageing" (GAL) studied possible applications of assistive technology for enabling older adults to live longer and independent in their own home. As part of this work, a technical platform was developed as a common technical basis for all assistive systems in the project. This article presents an overview of the architecture and core functionality of the technical platform, which in the first generation was developed for use in a laboratory setting, and in a second generation was extended for use in the project's field studies, i.e. prototype installations in end-users homes. The field studies' primary objective was the evaluation of the assistive technologies, that were developed within the overall project. However, these studies also confirmed that the fundamental concept of the technical platform is valid, and the prototypes continuously worked 24 h a day for several months. However, there were some problems related to lack of infrastructure in the older adults' homes and human factors such as inadvertent placement of objects across sensors' field of view, acceptance problems due to aesthetical reasons or simply communication problems, which show that making complex technologies work for users with little technical experience is well possible, but requires a careful consideration of the complete service chain and related "soft factors".

Sandia National Laboratories analysis code data base

NASA Astrophysics Data System (ADS)

Peterson, C. W.

1994-11-01

Sandia National Laboratories' mission is to solve important problems in the areas of national defense, energy security, environmental integrity, and industrial technology. The laboratories' strategy for accomplishing this mission is to conduct research to provide an understanding of the important physical phenomena underlying any problem, and then to construct validated computational models of the phenomena which can be used as tools to solve the problem. In the course of implementing this strategy, Sandia's technical staff has produced a wide variety of numerical problem-solving tools which they use regularly in the design, analysis, performance prediction, and optimization of Sandia components, systems, and manufacturing processes. This report provides the relevant technical and accessibility data on the numerical codes used at Sandia, including information on the technical competency or capability area that each code addresses, code 'ownership' and release status, and references describing the physical models and numerical implementation.

Supporting telemicroscopy and laboratory medicine activities. The Greek "TELE.INFO.MED.LAB" project.

PubMed

Miaoulis, G; Protopapa, E; Skourlas, C; Delides, G

1995-01-01

In this paper the authors present the basic results of the study for the "TELE.INFO.MED.LAB" project. This study is based on the local experience of the Metaxas Cancer Institute case and on international references. The possibilities rendered by current developments in telemedicine and particularly in telepathology accelerate and facilitate the communication of crucial medical data and creation of "second level" medical services overcoming the geographical particularities of the country. The availability of data transmission (signals, images, texts, etc.) enables the creation of a "uniform market" for various services. This system must take into account the financial realities, geographical aspects transportation problems and technological developments. Organization of this system, the choices of technical standards and the realization of a complete pilot project are described. For this system we also describe the functional and technical aspects, as well as software and hardware components for the different types of units.

PRACA Enhancement Pilot Study Report: Engineering for Complex Systems Program (formerly Design for Safety), DFS-IC-0006

NASA Technical Reports Server (NTRS)

Korsmeyer, David; Schreiner, John

2002-01-01

This technology evaluation report documents the findings and recommendations of the Engineering for Complex Systems Program (formerly Design for Safety) PRACA Enhancement Pilot Study of the Space Shuttle Program's (SSP's) Problem Reporting and Corrective Action (PRACA) System. A team at NASA Ames Research Center (ARC) performed this Study. This Study was initiated as a follow-on to the NASA chartered Shuttle Independent Assessment Team (SIAT) review (performed in the Fall of 1999) which identified deficiencies in the current PRACA implementation. The Pilot Study was launched with an initial qualitative assessment and technical review performed during January 2000 with the quantitative formal Study (the subject of this report) started in March 2000. The goal of the PRACA Enhancement Pilot Study is to evaluate and quantify the technical aspects of the SSP PRACA systems and recommend enhancements to address deficiencies and in preparation for future system upgrades.

Advanced technology for future regional transport aircraft

NASA Technical Reports Server (NTRS)

Williams, L. J.

1982-01-01

In connection with a request for a report coming from a U.S. Senate committee, NASA formed a Small Transport Aircraft Technology (STAT) team in 1978. STAT was to obtain information concerning the technical improvements in commuter aircraft that would likely increase their public acceptance. Another area of study was related to questions regarding the help which could be provided by NASA's aeronautical research and development program to commuter aircraft manufacturers with respect to the solution of technical problems. Attention is given to commuter airline growth, current commuter/region aircraft and new aircraft in development, prospects for advanced technology commuter/regional transports, and potential benefits of advanced technology. A list is provided of a number of particular advances appropriate to small transport aircraft, taking into account small gas turbine engine component technology, propeller technology, three-dimensional wing-design technology, airframe aerodynamics/propulsion integration, and composite structure materials.

Beyond MOS and Fibers: Wide-FoV Imaging Fourier Transform Spectroscopy - an Instrumentation Proposal for the Present and Future Mexican Telescopes

NASA Astrophysics Data System (ADS)

Rosales-Ortega, F. F.; Castillo, E.; Sánchez, S. F.; Iglesias-Páramo, J.; Mollá, J. I. M.; Chávez, M.

2016-10-01

In order to extend the current suite of instruments offered in the Observatorio Astrofísico Guillermo Haro (OAGH) in Cananea, Mexico (INAOE), and to explore a second-generation instrument for the future 6.5 m Telescopio San Pedro Martir (TSPM), we propose a prototype instrument that will provide un-biased wide-field (few arcmin) spectroscopic information, with the flexibility of operating at different spectral resolutions (R˜1-104), with a spatial resolution limited by seeing, and therefore to be used in a wide range of astronomical problems. This instrument will make use of the Fourier Transform Spectroscopy technique, which has been proved to be feasible in the optical wavelength range. Here we give the basic technical description of a Fourier transform spectrograph, as well as the technical advantages and weaknesses, and the science cases in which this instrument can be implemented.

Test and Evaluation for Enhanced Security: A Quantitative Method to Incorporate Expert Knowledge into Test Planning Decisions.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rizzo, Davinia; Blackburn, Mark

Complex systems are comprised of technical, social, political and environmental factors as well as the programmatic factors of cost, schedule and risk. Testing these systems for enhanced security requires expert knowledge in many different fields. It is important to test these systems to ensure effectiveness, but testing is limited to due cost, schedule, safety, feasibility and a myriad of other reasons. Without an effective decision framework for Test and Evaluation (T&E) planning that can take into consideration technical as well as programmatic factors and leverage expert knowledge, security in complex systems may not be assessed effectively. Therefore, this paper coversmore » the identification of the current T&E planning problem and an approach to include the full variety of factors and leverage expert knowledge in T&E planning through the use of Bayesian Networks (BN).« less

LFC: A maturing concept

NASA Technical Reports Server (NTRS)

Morris, John

1987-01-01

The existence of both turbulent and laminar flow was known for a long time, but it was not until the middle of the last century that the first systematic tests with fluids were conducted to establish the physical relationships and governing laws. The importance of turbulent and laminar airflows in aeronautics was recognized as early as the 1930's, but actual laminar flow control (LFC) investigations were not undertaken until the 1940's. This overview briefly touches on some of the historical development of LFC leading up to current activities. It then examines the technical problems being addressed and potential long-term LFC applications. Past and current Douglas activities are examined and the required future testing involving hybrid laminar flow control (HLFC) is discussed.

What Consultation and Freelance Writing Can Do for You and Your Students

ERIC Educational Resources Information Center

Muller, John A.

1978-01-01

Urges teachers of technical writing and graduate students in English to get off campus and engage in giving businesses advice intended to solve problems in technical communication, editing technical communication publications, and researching and writing such publications. (GW)

Distributed photovoltaic systems: Utility interface issues and their present status

NASA Technical Reports Server (NTRS)

Hassan, M.; Klein, J.

1981-01-01

Major technical issues involving the integration of distributed photovoltaics (PV) into electric utility systems are defined and their impacts are described quantitatively. An extensive literature search, interviews, and analysis yielded information about the work in progress and highlighted problem areas in which additional work and research are needed. The findings from the literature search were used to determine whether satisfactory solutions to the problems exist or whether satisfactory approaches to a solution are underway. It was discovered that very few standards, specifications, or guidelines currently exist that will aid industry in integrating PV into the utility system. Specific areas of concern identified are: (1) protection, (2) stability, (3) system unbalance, (4) voltage regulation and reactive power requirements, (5) harmonics, (6) utility operations, (7) safety, (8) metering, and (9) distribution system planning and design.

Airborne Wind Shear Detection and Warning Systems. Second Combined Manufacturers' and Technologists' Conference, part 2

NASA Technical Reports Server (NTRS)

Spady, Amos A., Jr. (Compiler); Bowles, Roland L. (Compiler); Schlickenmaier, Herbert (Compiler)

1990-01-01

The Second Combined Manufacturers' and Technologists' Conference was hosted jointly by NASA Langley (LaRC) and the Federal Aviation Administration (FAA) in Williamsburg, Virginia, on October 18 to 20, 1988. The meeting was co-chaired by Dr. Roland Bowles of LaRC and Herbrt Schlickenmaier of the FAA. The purpose of the meeting was to transfer significant, ongoing results gained during the second year of the joint NASA/FAA Airborne Wind Shear Program to the technical industry and to pose problems of current concern to the combined group. It also provided a forum for manufacturers to review forward-look technology concepts and for technologists to gain an understanding of the problems encountered by the manufacturers during the development of airborne equipment and the FAA certification requirements.

Should Technical Education Be More Liberal?

ERIC Educational Resources Information Center

Heckman, Richard T.

Due to the increasing emphasis on technology and the trend toward downsizing and multiculturalism in today's workplace, graduates of technical education programs need non-technical thinking and problem solving skills to stay successfully employed. Historically, however, a dichotomy has existed between vocational and liberal education, which has…

Technical Mathematics: Restructure of Technical Mathematics.

ERIC Educational Resources Information Center

Flannery, Carol A.

Designed to accompany a series of videotapes, this textbook provides information, examples, problems, and solutions relating to mathematics and its applications in technical fields. Chapter I deals with basic arithmetic, providing information on fractions, decimals, ratios, proportions, percentages, and order of operations. Chapter II focuses on…

Using Dynamic Geometry and Computer Algebra Systems in Problem Based Courses for Future Engineers

ERIC Educational Resources Information Center

Tomiczková, Svetlana; Lávicka, Miroslav

2015-01-01

It is a modern trend today when formulating the curriculum of a geometric course at the technical universities to start from a real-life problem originated in technical praxis and subsequently to define which geometric theories and which skills are necessary for its solving. Nowadays, interactive and dynamic geometry software plays a more and more…

The Effects of Experience Grouping on Achievement, Problem-Solving Discourse, and Satisfaction in Professional Technical Training

ERIC Educational Resources Information Center

Mulcahy, Robert Sean

2010-01-01

Learners inevitably enter adult technical training classrooms--indeed, in all classrooms--with different levels of expertise on the subject matter. When the diversity of expertise is wide and the course makes use of small group problem solving, instructors have a choice about how to group learners: they may distribute learners with greater…

Energy Systems Integration News | Energy Systems Integration Facility |

Science.gov Websites

facility. "We try to scope out some technical work that is based on the fundamental problem that technical or market problem that they're trying to solve, and then we'll scope out work with them based on that visit. "The second step is to begin to break that scope of work into what I call three

Problem-Oriented and Project-Based Learning (POPBL) as an Innovative Learning Strategy for Sustainable Development in Engineering Education

ERIC Educational Resources Information Center

Lehmann, M.; Christensen, P.; Du, X.; Thrane, M.

2008-01-01

In a world where systems are increasingly larger, where their boundaries are often difficult to identify, and where societal rather than technical issues play increasingly bigger roles, problems cannot be solved by applying a technical solution alone. It thus becomes important for engineers to be skilled not only in terms of their particular…

Practical Problems in Connection with the Planning and Introduction of Information Systems. Technical Report.

ERIC Educational Resources Information Center

Klose, Traugott

Major reforms brought about in July 1969 at the Free University of Berlin in its organization, planning, and decision making are reviewed. Specific problems are addressed, such as plans for introducing an information system on technical data and space use, plans for an information system on personnel employed by the university, and plans for an…

Effects of Think-Aloud Pair Problem Solving on Secondary-Level Students' Performance in Career and Technical Education Courses

ERIC Educational Resources Information Center

Pate, Michael L.; Miller, Greg

2011-01-01

A randomized posttest-only control group experimental design was used to determine the effects of think-aloud pair problem solving (TAPPS) on the troubleshooting performance of 34 secondary-level career and technical education students. There was no significant difference in success rate between TAPPS students and students who worked alone…

A Combined Corpus and Systemic-Functional Analysis of the Problem-Solution Pattern in a Student and Professional Corpus of Technical Writing.

ERIC Educational Resources Information Center

Flowerdew, Lynne

2003-01-01

Reports on research describing similarities and differences between expert and novice writing in the problem-solution pattern, a frequent rhetorical pattern of technical academic writing. A corpus of undergraduate student writing and one containing professional writing consisted of 80 and 60 recommendation reports, respectively, with each corpus…

Burns education: The emerging role of simulation for training healthcare professionals.

PubMed

Sadideen, Hazim; Goutos, Ioannis; Kneebone, Roger

2017-02-01

Burns education appears to be under-represented in UK undergraduate curricula. However current postgraduate courses in burns education provide formal training in resuscitation and management. Simulation has proven to be a powerful modality to advance surgical training in both technical and non-technical skills. We present a literature review that summarises the format of current burns education, and provides detailed insight into historic, current and novel advances in burns simulation for both technical and non-technical skills, that can be used to augment surgical training. Addressing the economic and practical limitations of current immersive surgical simulation is important, and this review proposes future directions for integration of innovative simulation strategies into training curricula. Copyright © 2016 Elsevier Ltd and ISBI. All rights reserved.

Draft secure medical database standard.

PubMed

Pangalos, George

2002-01-01

Medical database security is a particularly important issue for all Healthcare establishments. Medical information systems are intended to support a wide range of pertinent health issues today, for example: assure the quality of care, support effective management of the health services institutions, monitor and contain the cost of care, implement technology into care without violating social values, ensure the equity and availability of care, preserve humanity despite the proliferation of technology etc.. In this context, medical database security aims primarily to support: high availability, accuracy and consistency of the stored data, the medical professional secrecy and confidentiality, and the protection of the privacy of the patient. These properties, though of technical nature, basically require that the system is actually helpful for medical care and not harmful to patients. These later properties require in turn not only that fundamental ethical principles are not violated by employing database systems, but instead, are effectively enforced by technical means. This document reviews the existing and emerging work on the security of medical database systems. It presents in detail the related problems and requirements related to medical database security. It addresses the problems of medical database security policies, secure design methodologies and implementation techniques. It also describes the current legal framework and regulatory requirements for medical database security. The issue of medical database security guidelines is also examined in detailed. The current national and international efforts in the area are studied. It also gives an overview of the research work in the area. The document also presents in detail the most complete to our knowledge set of security guidelines for the development and operation of medical database systems.

The current situation and development of medical device testing institutes in China.

PubMed

Yang, Xiaofang; Mu, Ruihong; Fan, Yubo; Wang, Chunren; Li, Deyu

2017-04-01

This article analyses the current situation and development of Chinese medical device testing institutes from the perspectives of the two most important functions - testing functions and medical device standardization functions. Areas Covered: The objective of the Chinese government regulations for medical device industry is to ensure the safety and effectiveness of medical devices for Chinese patients. To support the regulation system, the Chinese government has established medical device testing institutes at different levels for example, the national, provincial, and municipal levels. These testing institutes also play an important role in technical support during medical device premarket registration and post market surveillance, they are also the vital practitioners of Chinese medical device standardization. Expert Commentary: Chinese medical device testing institutes are technical departments established by government, and serve the regulatory functions of government agency. In recent years, with the rapid development of medical device industry as well as constantly increasing international and domestic medical device market, the importance of medical device testing institute is more prominent, However, there are still some problems unsolved, such as their overall capacity remains to be improved, construction of standardization is to be strengthened, etc.

Defending Against Advanced Persistent Threats Using Game-Theory.

PubMed

Rass, Stefan; König, Sandra; Schauer, Stefan

2017-01-01

Advanced persistent threats (APT) combine a variety of different attack forms ranging from social engineering to technical exploits. The diversity and usual stealthiness of APT turns them into a central problem of contemporary practical system security, since information on attacks, the current system status or the attacker's incentives is often vague, uncertain and in many cases even unavailable. Game theory is a natural approach to model the conflict between the attacker and the defender, and this work investigates a generalized class of matrix games as a risk mitigation tool for an advanced persistent threat (APT) defense. Unlike standard game and decision theory, our model is tailored to capture and handle the full uncertainty that is immanent to APTs, such as disagreement among qualitative expert risk assessments, unknown adversarial incentives and uncertainty about the current system state (in terms of how deeply the attacker may have penetrated into the system's protective shells already). Practically, game-theoretic APT models can be derived straightforwardly from topological vulnerability analysis, together with risk assessments as they are done in common risk management standards like the ISO 31000 family. Theoretically, these models come with different properties than classical game theoretic models, whose technical solution presented in this work may be of independent interest.

REIMR: A Process for Utilizing Propulsion-Oriented 'Lessons-Learned' to Mitigate Development Risk

NASA Technical Reports Server (NTRS)

Ballard, Richard O.; Brown, Kendall K.

2005-01-01

This paper is a summary overview of a study conducted a t the NASA Marshall Space Flight Center (MSFC) during the initial phases of the Space Launch Initiative (SLI) program to evaluate a large number of technical problems associated with the design, development, test, evaluation and operation of several major liquid propellant rocket engine systems (i.e., SSME, Fastrac, J-2, F-1). The results of this study was the identification of the "Fundamental Root Causes" that enabled the technical problems to manifest, and practices that can be implemented to prevent them from recurring in future engine development efforts. This paper will discus the Fundamental Root Causes, cite some examples of how the technical problems arose from them, and provide a discussion of how they can be mitigated or avoided.

How Engineers Perceive the Importance of Ethics in Finland

ERIC Educational Resources Information Center

Taajamaa, Ville; Majanoja, Anne-Maarit; Bairaktarova, Diana; Airola, Antti; Pahikkala, Tapio; Sutinen, Erkki

2018-01-01

Success in complex and holistic engineering practices requires more than problem-solving abilities and technical competencies. Engineering education must offer proficient technical competences and also train engineers to think and act ethically. A technical "engineering-like" focus and demand have made educators and students overlook the…

Technical Assistance for Arts Facilities: A Sourcebook. A Report.

ERIC Educational Resources Information Center

Educational Facilities Labs., Inc., New York, NY.

This booklet is a directory of sources of technical assistance on problems relating to physical facilities for arts organizations. Wherever possible, agencies and organizations are described in their own words. Technical assistance in the area of physical facilities encompasses planning, financing, acquiring, renovating, designing, and maintaining…

Theoretical Aspects of the Patterns Recognition Statistical Theory Used for Developing the Diagnosis Algorithms for Complicated Technical Systems

NASA Astrophysics Data System (ADS)

Obozov, A. A.; Serpik, I. N.; Mihalchenko, G. S.; Fedyaeva, G. A.

2017-01-01

In the article, the problem of application of the pattern recognition (a relatively young area of engineering cybernetics) for analysis of complicated technical systems is examined. It is shown that the application of a statistical approach for hard distinguishable situations could be the most effective. The different recognition algorithms are based on Bayes approach, which estimates posteriori probabilities of a certain event and an assumed error. Application of the statistical approach to pattern recognition is possible for solving the problem of technical diagnosis complicated systems and particularly big powered marine diesel engines.

New psychoactive substances: catalysing a shift in forensic science practice?

PubMed

Tettey, Justice; Crean, Conor

2015-08-05

The analysis of substances of abuse remains one of the most matured areas in forensic science with a strong scientific basis, namely analytical chemistry. The current evolving drug markets, characterized by the global emergence of new psychoactive substances (NPS) and the need for forensic scientists to identify an unprecedented and ever-increasing number of NPS, presents a unique challenge to this discipline. This article looks at the current situation with NPS at the global level, and the challenges posed to the otherwise technically robust forensic science discipline of analysis of substances of abuse. It discusses the preparedness of forensic science to deal with the current situation and identifies the need for a shift in forensic science practice, especially one which embraces research and looks beyond normal casework in order to provide the much needed data for developing effective policy responses to the NPS problem. © 2015 The Author(s) Published by the Royal Society. All rights reserved.

Building systemic capacity for nutrition: training towards a professionalised workforce for Africa.

PubMed

Ellahi, Basma; Annan, Reginald; Sarkar, Swrajit; Amuna, Paul; Jackson, Alan A

2015-11-01

The fundamental role played by good nutrition in enabling personal, social and economic development is now widely recognised as presenting a fundamental global challenge that has to be addressed if major national and international problems are to be resolved in the coming decades. The recent focus provided by the Millennium Development Goals and the Scaling-Up-Nutrition (SUN) movement has been towards reducing the extent of nutrition-related malnutrition in high-burden countries. This has served to emphasise that there is a problem of inadequate professional capacity in nutrition that is sufficiently widespread to severely limit all attempts at the effective delivery and sustainability of nutrition-related and nutrition-enabling interventions that have impact at scale. Many high-burden countries are in sub-Saharan Africa where there is a high dependency on external technical support to address nutrition-related problems. We have sought to explore the nature and magnitude of the capacity needs with a particular focus on achieving levels of competency within standardised professional pre-service training which is fit-for-purpose to meet the objectives within the SUN movement in Africa. We review our experience of engaging with stakeholders through workshops, a gap analysis of the extent of the problem to be addressed, and a review of current efforts in Africa to move the agenda forward. We conclude that there are high aspirations but severely limited human resource and capacity for training that is fit-for-purpose at all skill levels in nutrition-related subjects in Africa. There are no structured or collaborative plans within professional groups to address the wide gap between what is currently available, the ongoing needs and the future expectations for meeting local technical and professional capability. Programmatic initiatives encouraged by agencies and other external players, will need to be matched by improved local capabilities to address the serious efforts required to meet the needs for sustained improvements related to SUN in high-burden countries. Importantly, there are pockets of effort which need to be encouraged within a context in which experience can be shared and mutual support provided.

Comprehensive Report For Proposed Elevated Temperature Elastic Perfectly Plastic (EPP) Code Cases Representative Example Problems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hollinger, Greg L.

Background: The current rules in the nuclear section of the ASME Boiler and Pressure Vessel (B&PV) Code , Section III, Subsection NH for the evaluation of strain limits and creep-fatigue damage using simplified methods based on elastic analysis have been deemed inappropriate for Alloy 617 at temperatures above 1200F (650C)1. To address this issue, proposed code rules have been developed which are based on the use of elastic-perfectly plastic (E-PP) analysis methods and which are expected to be applicable to very high temperatures. The proposed rules for strain limits and creep-fatigue evaluation were initially documented in the technical literature 2,more » 3, and have been recently revised to incorporate comments and simplify their application. The revised code cases have been developed. Task Objectives: The goal of the Sample Problem task is to exercise these code cases through example problems to demonstrate their feasibility and, also, to identify potential corrections and improvements should problems be encountered. This will provide input to the development of technical background documents for consideration by the applicable B&PV committees considering these code cases for approval. This task has been performed by Hollinger and Pease of Becht Engineering Co., Inc., Nuclear Services Division and a report detailing the results of the E-PP analyses conducted on example problems per the procedures of the E-PP strain limits and creep-fatigue draft code cases is enclosed as Enclosure 1. Conclusions: The feasibility of the application of the E-PP code cases has been demonstrated through example problems that consist of realistic geometry (a nozzle attached to a semi-hemispheric shell with a circumferential weld) and load (pressure; pipe reaction load applied at the end of the nozzle, including axial and shear forces, bending and torsional moments; through-wall transient temperature gradient) and design and operating conditions (Levels A, B and C).« less

Vocational technical and adult education: Status, trends and issues related to electronic delivery

NASA Technical Reports Server (NTRS)

Rothenberg, D.

1973-01-01

Data are analyzed, and trends and issues are discussed to provide information useful to the systems designer who wishes to identify and assess the opportunities for large scale electronic delivery in vocational/technical and adult education. Issues connected with vocational/technical education are investigated, with emphasis on those issues in the current spotlight which are relevant to the possibilities of electronic delivery. The current role of media is examined in vocational/technical instruction.

Fuel cells feasibility

NASA Technical Reports Server (NTRS)

Schonfeld, D.; Charng, T.

1981-01-01

The technical and economic status of fuel cells is assessed with emphasis on their potential benefits to the Deep Space Network. The fuel cell, what it is, how it operates, and what its outputs are, is reviewed. Major technical problems of the fuel cell and its components are highlighted. Due to these problems and economic considerations it is concluded that fuel cells will not become commercially viable until the early 1990s.

Problems of Technical Standards Teaching in the Context of the Globalization and Euro-Integration in Higher Education System of Ukraine

ERIC Educational Resources Information Center

Kornuta, Olena; Pryhorovska, Tetiana

2015-01-01

Globalization and Ukraine association with EU imply including Ukrainian universities into the world scientific space. The aim of this article is to analyze the problem of drawing standards teaching, based on the experience of Ivano-Frankivsk National Technical University of Oil and Gas (Ukraine) and to summarize the experience of post Soviet…

A Fast Solution of the Lindley Equations for the M-Group Regression Problem. Technical Report 78-3, October 1977 through May 1978.

ERIC Educational Resources Information Center

Molenaar, Ivo W.

The technical problems involved in obtaining Bayesian model estimates for the regression parameters in m similar groups are studied. The available computer programs, BPREP (BASIC), and BAYREG, both written in FORTRAN, require an amount of computer processing that does not encourage regular use. These programs are analyzed so that the performance…

Teaching Technical Writing: Focusing on Process.

ERIC Educational Resources Information Center

Santelmann, Patricia Kelly

In preparing students for business writing, a technical writing class should foster (1) a sensitivity to audience and an understanding of the business or technical organizational audience, (2) analytical problem solving that precedes any but the simplest writing task, (3) understanding of the patterns of organization that make information clear to…

Moving International Technical Communication Forward: A World Englishes Approach

ERIC Educational Resources Information Center

Bokor, Michael Jarvis Kwadzo

2011-01-01

This article explores how the English language contributes to cross-boundary communication failure and establishes that there is an "English language problem" that has not been adequately addressed in preparing United States native English-speaking students for international technical communication tasks. For example, U.S. technical communication…

Technical Writing Tips

ERIC Educational Resources Information Center

Kennedy, Patrick M.

2004-01-01

The main reason engineers, technicians, and programmers write poor technical documents is because they have had little training or experience in that area. This article addresses some of the basics that students can use to master technical writing tasks. The article covers the most common problems writers make and offers suggestions for improving…

A Decision Support Tool to Evaluate Sources and Sinks of Nitrogen within a Watershed Framework

EPA Science Inventory

Human transformation of the nitrogen (N) cycle is causing a number of environmental and human health problems. Federal, state and local authorities focusing on management of N loadings face both technical and non-technical challenges. One technical issue is that we need a bette...

Effects of health and safety problem recognition on small business facility investment

PubMed Central

2013-01-01

Objectives This study involved a survey of the facility investment experiences, which was designed to recognize the importance of health and safety problems, and industrial accident prevention. Ultimately, we hope that small scale industries will create effective industrial accident prevention programs and facility investments. Methods An individual survey of businesses’ present physical conditions, recognition of the importance of the health and safety problems, and facility investment experiences for preventing industrial accidents was conducted. The survey involved 1,145 business operators or management workers in small business places with fewer than 50 workers in six industrial complexes. Results Regarding the importance of occupational health and safety problems (OHS), 54.1% said it was “very important”. Received technical and financial support, and industrial accidents that occurred during the past three years were recognized as highly important for OHS. In an investigation regarding facility investment experiences for industrial accident prevention, the largest factors were business size, greater numbers of industrial accidents, greater technical and financial support received, and greater recognition of the importance of the OHS. The related variables that decided facility investment for industry accident prevention in a logistic regression analysis were the experiences of business facilities where industrial accidents occurred during the past three years, received technical and financial support, and recognition of the OHS. Those considered very important were shown to be highly significant. Conclusions Recognition of health and safety issues was higher when small businesses had experienced industrial accidents or received financial support. The investment in industrial accidents was greater when health and safety issues were recognized as important. Therefore, the goal of small business health and safety projects is to prioritize health and safety issues in terms of business management and recognition of importance. Therefore, currently various support projects are being conducted. However, there are issues regarding the limitations of the target businesses and inadequacies in maintenance and follow-up. Overall, it is necessary to provide various incentives for onsite participation that can lead to increased recognition of health and safety issues and practical investments, while perfecting maintenance and follow up measures by thoroughly revising existing operating systems. PMID:24472180

Effects of health and safety problem recognition on small business facility investment.

PubMed

Park, Jisu; Jeong, Harin; Hong, Sujin; Park, Jong-Tae; Kim, Dae-Sung; Kim, Jongseo; Kim, Hae-Joon

2013-10-23

This study involved a survey of the facility investment experiences, which was designed to recognize the importance of health and safety problems, and industrial accident prevention. Ultimately, we hope that small scale industries will create effective industrial accident prevention programs and facility investments. An individual survey of businesses' present physical conditions, recognition of the importance of the health and safety problems, and facility investment experiences for preventing industrial accidents was conducted. The survey involved 1,145 business operators or management workers in small business places with fewer than 50 workers in six industrial complexes. Regarding the importance of occupational health and safety problems (OHS), 54.1% said it was "very important". Received technical and financial support, and industrial accidents that occurred during the past three years were recognized as highly important for OHS. In an investigation regarding facility investment experiences for industrial accident prevention, the largest factors were business size, greater numbers of industrial accidents, greater technical and financial support received, and greater recognition of the importance of the OHS. The related variables that decided facility investment for industry accident prevention in a logistic regression analysis were the experiences of business facilities where industrial accidents occurred during the past three years, received technical and financial support, and recognition of the OHS. Those considered very important were shown to be highly significant. Recognition of health and safety issues was higher when small businesses had experienced industrial accidents or received financial support. The investment in industrial accidents was greater when health and safety issues were recognized as important. Therefore, the goal of small business health and safety projects is to prioritize health and safety issues in terms of business management and recognition of importance. Therefore, currently various support projects are being conducted. However, there are issues regarding the limitations of the target businesses and inadequacies in maintenance and follow-up. Overall, it is necessary to provide various incentives for onsite participation that can lead to increased recognition of health and safety issues and practical investments, while perfecting maintenance and follow up measures by thoroughly revising existing operating systems.

RESEARCH AND DEVELOPMENT PRIORITIES IN TECHNICAL EDUCATION, A REPORT OF A NATIONAL RESEARCH PLANNING CONFERENCE IN TECHNICAL EDUCATION (THE OHIO STATE UNIVERSITY, JANUARY 10-11, 1967).

ERIC Educational Resources Information Center

MILLER, AARON J.

A SELECT GROUP OF PARTICIPANTS REPRESENTING NATIONAL LEADERSHIP IN BUSINESS, INDUSTRY, RESEARCH, GOVERNMENT, AND EDUCATION MET TO IDENTIFY SOME OF THE MOST OBVIOUS NEW EMERGING TECHNICAL OCCUPATIONS WHICH MIGHT REQUIRE RESEARCH AND DEVELOPMENT EFFORTS AND SOME OF THE MOST PRESSING RESEARCHABLE PROBLEM AREAS IN TECHNICAL EDUCATION. THE NEW OR…

The Research of Improving the Particleboard Glue Dosing Process Based on TRIZ Analysis

NASA Astrophysics Data System (ADS)

Yu, Huiling; Fan, Delin; Zhang, Yizhuo

This research creates a design methodology by synthesizing the Theory of Inventive Problem Solving (TRIZ) and cascade control based on Smith predictor. The particleboard glue supplying and dosing system case study defines the problem and the solution using the methodology proposed in the paper. Status difference existing in the gluing dosing process of particleboard production usually causes gluing volume inaccurately. In order to solve the problem above, we applied the TRIZ technical contradiction and inventive principle to improve the key process of particleboard production. The improving method mapped inaccurate problem to TRIZ technical contradiction, the prior action proposed Smith predictor as the control algorithm in the glue dosing system. This research examines the usefulness of a TRIZ based problem-solving process designed to improve the problem-solving ability of users in addressing difficult or reoccurring problems and also testify TRIZ is practicality and validity. Several suggestions are presented on how to approach this problem.

Teaching Intercultural Communication in a Basic Technical Writing Course: A Survey of Our Current Practices and Methods

ERIC Educational Resources Information Center

Matveeva, Natalia

2008-01-01

This research article reports the results of an online survey distributed among technical writing instructors in 2006. The survey aimed to examine how we teach intercultural communication in basic technical writing courses: our current practices and methods. The article discusses three major challenges that instructors may face when teaching about…

Setting standards for product selection: allergy prevention.

PubMed

White, I R

1997-01-01

It is axiomatic to state that if products made of natural rubber latex were not used in health care settings then there would be no problems of acquired hypersensitivity from such products. Although synthetic materials are available they do not currently possess the same technical qualities of elasticity and comfort, nor do they deliver the desired degree of protection against biological agents as gloves made out of natural rubber latex. Selection of gloves either for non-sterile procedures or sterile surgical use should be based on this understanding, and gloves with minimal levels of extractable latex proteins should be used.

Management in biophotonics and biotechnologies

NASA Astrophysics Data System (ADS)

Meglinski, I. V.; Tuchin, V. V.

2005-10-01

Biophotonics, one of the most exciting and rapidly growing areas, offers vast potential for changing traditional approaches to meeting many critical needs in medicine, biology, pharmacy, food, health care and cosmetic industries. Follow the market trends we developed new MSc course Management in Biophotonics and Biotechnologies (MBB) that provide students of technical disciplines with the necessary training, education and problem-solving skills to produce professionals and managers who are better equipped to handle the challenges of modern science and business in biophotonics and biotechnology. A major advantage of the course is that it provides skills not currently available to graduates in other Master programs.

US Army Research Laboratory power sources R and D programs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Christopher, H.A.; Gilman, S.; Hamlen, R.P.

1993-05-01

The development and application of new electronic technologies over the recent past has resulted in a major evolution of new electronic battlefield equipment. The need for lighter-weight and more cost effective power sources with higher power/energy density capability is critical to the successful development and deployment of these new, high performance battlefield devices. The current status and thrust of the Army Research Laboratory's (ARL's) battery and fuel cell R and D programs that support these new and emerging applications will be reviewed. Major technical barriers will be identified along with the corresponding proposed approaches to solving these anticipated problems.

A brief history and technical review of the expert system research

NASA Astrophysics Data System (ADS)

Tan, Haocheng

2017-09-01

The expert system is a computer system that emulates the decision-making ability of a human expert, which aims to solve complex problems by reasoning knowledge. It is an important branch of artificial intelligence. In this paper, firstly, we briefly introduce the development and basic structure of the expert system. Then, from the perspective of the enabling technology, we classify the current expert systems and elaborate four expert systems: The Rule-Based Expert System, the Framework-Based Expert System, the Fuzzy Logic-Based Expert System and the Expert System Based on Neural Network.

The laboratory diagnosis of bacterial vaginosis

PubMed Central

Money, Deborah

2005-01-01

Bacterial vaginosis (BV) is an extremely common health problem for women. In addition to the troublesome symptoms often associated with a disruption in the balance of vaginal flora, BV is associated with adverse gynecological and pregnancy outcomes. Although not technically a sexually transmitted infection, BV is a sexually associated condition. Diagnostic tests include real-time clinical/microbiological diagnosis, and the current gold standard, the standardized evaluation of morphotypes on Gram stain analysis. The inappropriate use of vaginal culture can be misleading. Future developments into molecular-based diagnostics will be important to further understand this complex endogenous flora disruption. PMID:18159532

A Critical Appraisal of RAFT-Mediated Polymerization-Induced Self-Assembly

PubMed Central

2016-01-01

Recently, polymerization-induced self-assembly (PISA) has become widely recognized as a robust and efficient route to produce block copolymer nanoparticles of controlled size, morphology, and surface chemistry. Several reviews of this field have been published since 2012, but a substantial number of new papers have been published in the last three years. In this Perspective, we provide a critical appraisal of the various advantages offered by this approach, while also pointing out some of its current drawbacks. Promising future research directions as well as remaining technical challenges and unresolved problems are briefly highlighted. PMID:27019522

A proposal for continuation of support for the application of remotely sensed data to state and regional problems. Part 1: Technical proposal

NASA Technical Reports Server (NTRS)

1981-01-01

The objectives, procedures, accomplishments, plans, and ultimate uses of information from current projects at the Mississippi Remote Sensing Center are discussed for the following applications: (1) land use planning; (2) strip mine inventory and reclamation; (3) biological management for white tailed deer; (4) forest habitats in potential lignite areas; (5) change discrimination in gravel operations; (6) discrimination of freshwater wetlands for inventory and monitoring; and (7) remote sensing data analysis support systems. The initiation of a conceptual design for a LANDSAT based, state wide information system is proposed.

Mathematical Approach to Identification of Load Structure at the Nodes of the Distribution Grids 6-10 kV and 0.4 kV

NASA Astrophysics Data System (ADS)

Nizamutdinova, T.; Mukhlynin, N.

2017-06-01

A significant increasing energy efficiency of the full cycle of production, transmission and distribution of electricity in grids should be based on the management of separate consumers of electricity. The existing energy supply systems based on the concept of «smart things» do not allow to identify the technical structure of the electricity consumption in the load nodes from the grid side. It makes solving the tasks of energy efficiency more difficult. To solve this problem, the use of Wavelet transform to create a mathematical tool for monitoring the load composition in the nodes of the distribution grids of 6-10 kV, 0.4 kV is proposed in this paper. The authors have created a unique wavelet based functions for some consumers, based on their current consumption graphs of these power consumers. Possibility of determination of the characteristics of individual consumers of electricity in total nodal charts of load is shown in the test case. In future, creation of a unified technical and informational model of load control will allow to solve the problem of increasing the economic efficiency of not only certain consumers, but also the entire power supply system as a whole.

Virtual patient simulator for distributed collaborative medical education.

PubMed

Caudell, Thomas P; Summers, Kenneth L; Holten, Jim; Hakamata, Takeshi; Mowafi, Moad; Jacobs, Joshua; Lozanoff, Beth K; Lozanoff, Scott; Wilks, David; Keep, Marcus F; Saiki, Stanley; Alverson, Dale

2003-01-01

Project TOUCH (Telehealth Outreach for Unified Community Health; http://hsc.unm.edu/touch) investigates the feasibility of using advanced technologies to enhance education in an innovative problem-based learning format currently being used in medical school curricula, applying specific clinical case models, and deploying to remote sites/workstations. The University of New Mexico's School of Medicine and the John A. Burns School of Medicine at the University of Hawai'i face similar health care challenges in providing and delivering services and training to remote and rural areas. Recognizing that health care needs are local and require local solutions, both states are committed to improving health care delivery to their unique populations by sharing information and experiences through emerging telehealth technologies by using high-performance computing and communications resources. The purpose of this study is to describe the deployment of a problem-based learning case distributed over the National Computational Science Alliance's Access Grid. Emphasis is placed on the underlying technical components of the TOUCH project, including the virtual reality development tool Flatland, the artificial intelligence-based simulation engine, the Access Grid, high-performance computing platforms, and the software that connects them all. In addition, educational and technical challenges for Project TOUCH are identified. Copyright 2003 Wiley-Liss, Inc.

[Coping of cybervictimization in adolescence - emotional and behavioral reactions to cyberbullying ].

PubMed

Ittel, Angela; Müller, Christin R; Pfetsch, Jan; Walk, Sebastian

2014-01-01

The experience of cybervictimization is related to health, psychological, and behavioral problems among children and adolescents. Up to today research is scarce, how the persons affected by cybervictimization react and which determinants influence the choice for social, problem-focused, technical, or helpless coping behavior. The current online study with 428 adolescents considers age, sex, mean internet use, frequency of victimization, roles in cyberbullying, and emotional reactions to cybervictimization as potential determinants of the mentioned coping strategies. Based on the participant role approach, roles of cyberbullies, cybervictims, defenders or outsiders are frequently changing. Logistic regression analyses point out the important relevance of emotional reactions like anger or helplessness and the roles as cyberbully-victim or outsider. Further, younger participants reported cybervictimization more often, while the frequency of cybervictimization and sex did not and internet use only partially predict coping strategies. These findings corroborate the relevance of emotional reactions and the roles in the process of cyberbullying. As a starting point for prevention and intervention of cybervictimization, we suggest emotion regulation, teaching of technical coping behaviors as well as reflexion of roles in the context of cyberbullying. If feasible, different stakeholders should be engaged in this process: adolescents, parents, educational staff inside and outside of schools, experts from counseling and therapy as well as internet and mobile phone service providers.

Integration of the virtual model of a Stewart platform with the avatar of a vehicle in a virtual reality

NASA Astrophysics Data System (ADS)

Herbuś, K.; Ociepka, P.

2016-08-01

The development of methods of computer aided design and engineering allows conducting virtual tests, among others concerning motion simulation of technical means. The paper presents a method of integrating an object in the form of a virtual model of a Stewart platform with an avatar of a vehicle moving in a virtual environment. The area of the problem includes issues related to the problem of fidelity of mapping the work of the analyzed technical mean. The main object of investigations is a 3D model of a Stewart platform, which is a subsystem of the simulator designated for driving learning for disabled persons. The analyzed model of the platform, prepared for motion simulation, was created in the “Motion Simulation” module of a CAD/CAE class system Siemens PLM NX. Whereas the virtual environment, in which the moves the avatar of the passenger car, was elaborated in a VR class system EON Studio. The element integrating both of the mentioned software environments is a developed application that reads information from the virtual reality (VR) concerning the current position of the car avatar. Then, basing on the accepted algorithm, it sends control signals to respective joints of the model of the Stewart platform (CAD).

SAM Technical Contacts

EPA Pesticide Factsheets

These technical contacts are available to help with questions regarding method deviations, modifications, sample problems or interferences, quality control requirements, the use of alternative methods, or the need to address analytes or sample types.

An approach to forecast major GIC events

NASA Astrophysics Data System (ADS)

Stauning, Peter

2013-04-01

In addition to provide fascinating auroral displays, the large and violent magnetic substorms may endanger power grids and cause problems for a variety of other important technical systems. Such substorms generally result from the build-up of excessive stresses in the magnetospheric tail region caused by imbalance between the transpolar antisunward convection of plasma and embedded magnetic fields and the sunward convection (return flow) at auroral latitudes. The stresses are subsequently released through substorm processes, which may, among other, cause rapidly varying ionospheric currents in the million-ampere range that in turn endanger power grids through the related "Geomagnetically Induced Current" (GIC) effects. The presentation will discuss the construction of a geomagnetic stress parameter based on a combination of polar cap indices and auroral electrojet monitoring to be used in the forecasting of major GIC events.

The use of expensive technologies instead of simple, sound and effective lifestyle interventions: a perpetual delusion

PubMed Central

Carlos, Silvia; de Irala, Jokin; Hanley, Matt; Martínez-González, Miguel Ángel

2014-01-01

A dangerous distortion of priorities seems to be currently apparent in the dominant approaches to major public health problems, including cardiovascular disease, diabetes, obesity, cancer and some infectious diseases. Relevant examples suggest an apparently inappropriate tendency to prioritise technocratic, partial solutions rather than confronting their true behavioural and structural determinants. Technically oriented preventive medicine often takes excessive precedence over simpler, more sensible approaches to modify lifestyles, the environment and the social structure. Structural factors (social, cultural, financial, familiar, educational, political or ideological factors) that act as determinants of individual behaviours should be effectively addressed to confront the essential causes of the most prevalent and important health problems. Some consumer-directed commercial forces seem to be increasingly driving many aspects of the current sociocultural environment, and may eventually compromise the main pursuits of public health. Population-wide strategies are needed to create a healthy sociocultural environment and to empower individuals and make themselves resistant to these adverse environmental and structural pressures. Otherwise most public health interventions will most likely end in failures. PMID:24962820

Enhancing public health outcomes in developing countries: from good policies and best practices to better implementation.

PubMed

Woolcock, Michael

2018-06-01

In rich and poor countries alike, a core challenge is building the state's capability for policy implementation. Delivering high-quality public health and health care-affordably, reliably and at scale, for all-exemplifies this challenge, since doing so requires deftly integrating refined technical skills (surgery), broad logistics management (supply chains, facilities maintenance), adaptive problem solving (curative care), and resolving ideological differences (who pays? who provides?), even as the prevailing health problems themselves only become more diverse, complex, and expensive as countries become more prosperous. However, the current state of state capability in developing countries is demonstrably alarming, with the strains and demands only likely to intensify in the coming decades. Prevailing "best practice" strategies for building implementation capability-copying and scaling putative successes from abroad-are too often part of the problem, while individual training ("capacity building") and technological upgrades (e.g. new management information systems) remain necessary but deeply insufficient. An alternative approach is outlined, one centered on building implementation capability by working iteratively to solve problems nominated and prioritized by local actors.

Factors influencing private health providers' technical quality of care for acute respiratory infections among under-five children in rural West Bengal, India.

PubMed

Chakraborty, Sarbani; Frick, Kevin

2002-11-01

In many developing countries, private health practitioners provide a significant portion of curative care for diseases which are of public health importance. Currently, health sector reform efforts in these countries are fostering increased participation of private providers in the delivery of health services, including those of public health importance. Guaranteeing good technical quality of care is critical to the process. However, little is known about private providers' technical quality of care (disease management practices) and the factors influencing these services. The purpose of this study was to contribute information on this topic. The study was conducted among private providers in rural West Bengal, India and focused on providers' disease management practices for acute respiratory infections (ARI) among under-five children. World Health Organization (WHO) guidelines for ARI case management were used as the expected standard of care. Observations of patient-provider encounters and interviews with the providers and mothers were the main sources of data. The study found that private health providers in rural West Bengal have inadequate technical quality of care. The problem was related both to low levels of performance (limited potential) and inconsistency in performance (within-provider variation). Limited potential for good technical quality for ARI among the providers was related to lack of knowledge (technical incompetence). One of the important factors influencing within-provider variation was patient load. Since rural private providers operate on a fee-for-service payment system, there are incentives related to seeing many patients. The study concluded that to bring about sustainable improvements in private providers' ARI disease management practices, training programs and interventions that improved compliance were necessary.

Results of a preliminary investigation of inlet unstart on a high-speed civil transport airplane concept

NASA Technical Reports Server (NTRS)

Domack, Christopher S.

1992-01-01

The aircraft design engineer of today is tasked with satisfying an increasing number of conflicting requirements. The fact that conflict in these requirements may be technically, economically, or politically motivated usually compounds the difficulty of determining the best solution to a design issue. In this regard, propulsion/airframe integration for supersonic airplanes must rank as one of the most challenging aspects of airplane design. For the cruise Mach numbers currently being considered for High-Speed Civil Transport (HSCT) airplanes, the inlet requirements of low drag, low bleed flow, and high pressure recovery appear to be best met with a mixed-compression design. Unfortunately, these desirable attributes come with a highly undesirable companion: the inlet unstart phenomenon. Concern over the effects of a mixed-compression inlet unstart on the vehicle dynamics of large, high-speed aircraft is not new; a comprehensive wind-tunnel study addressing the problem was published in 1962. Additional investigations of the problem were made throughout the United States SST program and the follow-on NASA program into the late 1970's. The current study sought to examine the magnitude of the problem in order to determine if an inlet unstart posed a potential hazard severe enough to preclude the use of mixed-compression inlets on proposed HSCT concepts.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carrington, David Bradley; Waters, Jiajia

Research and development of KIVA-hpFE for turbulent reactive and multiphase flow particularly as related to engine modeling program has relevance to National energy security and climate change. Climate change is a source problem, and energy national security is consumption of petroleum products problem. Accurately predicting engine processes leads to, lower greenhouse gas (GHG) emission, where engines in the transportation sector currently account for 26% of the U.S. GHG emissions. Less dependence on petroleum products leads to greater energy security. By Environmental Protection Agency standards, some vehicles are now reaching 42 to the 50 mpg mark. These are conventional gasoline engines.more » Continued investment and research into new technical innovations, the potential exists to save more than 4 million barrels of oil per day or approximately $200 to $400 million per day. This would be a significant decrease in emission and use of petroleum and a very large economic stimulus too! It is estimated with further advancements in combustion, the current emissions can be reduced up to 40%. Enabling better understanding of fuel injection and fuel-air mixing, thermodynamic combustion losses, and combustion/emission formation processes enhances our ability to help solve both problems. To provide adequate capability for accurately simulating these processes, minimize time and labor for development of engine technology, are the goals of our KIVA development program.« less

Example Elaboration as a Neglected Instructional Strategy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Girill, T R

Over the last decade an unfolding cognitive-psychology research program on how learners use examples to develop effective problem solving expertise has yielded well-established empirical findings. Chi et al., Renkl, Reimann, and Neubert (in various papers) have confirmed statistically significant differences in how good and poor learners inferentially elaborate (self explain) example steps as they study. Such example elaboration is highly relevant to software documentation and training, yet largely neglected in the current literature. This paper summarizes the neglected research on example use and puts its neglect in a disciplinary perspective. The author then shows that differences in support for examplemore » elaboration in commercial software documentation reveal previously over looked usability issues. These issues involve example summaries, using goals and goal structures to reinforce example elaborations, and prompting readers to recognize the role of example parts. Secondly, I show how these same example elaboration techniques can build cognitive maturity among underperforming high school students who study technical writing. Principle based elaborations, condition elaborations, and role recognition of example steps all have their place in innovative, high school level, technical writing exercises, and all promote far transfer problem solving. Finally, I use these studies to clarify the constructivist debate over what writers and readers contribute to text meaning. I argue that writers can influence how readers elaborate on examples, and that because of the great empirical differences in example study effectiveness (and reader choices) writers should do what they can (through within text design features) to encourage readers to elaborate examples in the most successful ways. Example elaboration is a uniquely effective way to learn from worked technical examples. This paper summarizes years of research that clarifies example elaboration. I then show how example elaboration can make complex software documentation more useful, improve the benefits of technical writing exercises for underperforming students, and enlighten the general discussion of how writers can and should help their readers.« less

A Summary of Technical Problems Associated With Broadband Cable Teleservices Development. A Survey of Technical Requirements for Broadband Cable Teleservices; Volume One.

ERIC Educational Resources Information Center

McManamon, P. M.; Utlaut, W. F.

The results of a survey of cable television (CATV) and related technological industries are summarized. In this, the first of a series of seven reports, attention is focused upon some major technical factors which need to be considered in order that a transition from the technical state of today's cable television and services to new teleservices…

Information Hang-Ups; Problems Encountered by Users of the Technical Information Services Offered by DDC and CFSTI, with Recommendations for the Future.

ERIC Educational Resources Information Center

Committee of DDC Users in the Greater Washington, DC. Area, Washington, DC.

A change in policy of the Defense Documentation Center (DDC) with regard to supplying hard copy and/or microforms of reports caused problems to users of the DDC Technical Report Service. Discussions among users of the service, a questionnaire survey and committee reports summarized basic user concerns, provided selected statistics and a look at…

Problems of Technical Electrodynamics (Selected Articles),

DTIC Science & Technology

1984-04-11

copy available. ii DC 83143001 PAGE 1 PROBLEMS OF TECHNICAL ELECTRODYNAMICS. DOC - 83143001 PAGE 2 In the collector /collection are connected the...composite/ compound reliable in mechanical sense forgings of rotors with a weight of 250 t and it is more and rotor binding bands. These K forgings must be...go - calculated coefficient, which considers the character of temperature field. With a linear change in temperature .=1, with parabolic =3

FUJIFILM X10 white orbs and DeOrbIt

NASA Astrophysics Data System (ADS)

Dietz, Henry Gordon

2013-01-01

The FUJIFILM X10 is a high-end enthusiast compact digital camera using an unusual sensor design. Unfortunately, upon its Fall 2011 release, the camera quickly became infamous for the uniquely disturbing "white orbs" that often appeared in areas where the sensor was saturated. FUJIFILM's first attempt at a fix was firmware released on February 25, 2012 if it had little effect. In April 2012, a sensor replacement essentially solved the problem. This paper explores the "white orb" phenomenon in detail. After FUJIFILM's attempt at a firmware fix failed, the author decided to create a post-processing tool that automatically could repair existing images. DeOrbIt was released as a free tool on March 7, 2012. To better understand the problem and how to fix it, the WWW form version of the tool logs images, processing parameters, and evaluations by users. The current paper describes the technical problem, the novel computational photography methods used by DeOrbit to repair affected images, and the public perceptions revealed by this experiment.

A New Approach to Teaching Biomechanics Through Active, Adaptive, and Experiential Learning.

PubMed

Singh, Anita

2017-07-01

Demand of biomedical engineers continues to rise to meet the needs of healthcare industry. Current training of bioengineers follows the traditional and dominant model of theory-focused curricula. However, the unmet needs of the healthcare industry warrant newer skill sets in these engineers. Translational training strategies such as solving real world problems through active, adaptive, and experiential learning hold promise. In this paper, we report our findings of adding a real-world 4-week problem-based learning unit into a biomechanics capstone course for engineering students. Surveys assessed student perceptions of the activity and learning experience. While students, across three cohorts, felt challenged to solve a real-world problem identified during the simulation lab visit, they felt more confident in utilizing knowledge learned in the biomechanics course and self-directed research. Instructor evaluations indicated that the active and experiential learning approach fostered their technical knowledge and life-long learning skills while exposing them to the components of adaptive learning and innovation.

State Practices in the Assessment of Outcomes for Students with Disabilities. Technical Report.

ERIC Educational Resources Information Center

Shriner, James G.; And Others

This technical report describes the methodology, results, and conclusions of a 1991 survey, which was conducted to determine state efforts to develop systems to assess educational outcomes, states' needs for solutions to technical/implementation problems, existing databases, and efforts of states to design a comprehensive system of indicators in…

Introducing Heuristics of Cultural Dimensions into the Service-Level Technical Communication Classroom

ERIC Educational Resources Information Center

Schafer, Robert

2009-01-01

A significant problem for practitioners of technical communication is to gain the skills to compete in a global, multicultural work environment. Instructors of technical communication can provide future practitioners with the tools to compete and excel in this global environment by introducing heuristics of cultural dimensions into the…

Emphasis: Technical Education. Conference Report (St. Louis, Mo., May 12-14, 1966).

ERIC Educational Resources Information Center

American Association of Junior Colleges, Washington, DC.

The purpose of this conference was to bring expertise in the field of technical education to bear upon the identification and resolution of problems inhibiting the expansion of programs at the junior college level. Sixty-four participants were involved. The conference focused upon the relationships of technical education to: society, college…

Expanding and Redirecting Historical Research in Technical Writing: In Search of Our Past.

ERIC Educational Resources Information Center

Tebeaux, Elizabeth; Killingsworth, M. Jimmie

1992-01-01

Suggests an approach for expanding and integrating research to produce a history of technical writing. Defines problems that reside in writing such a history, suggests research premises and questions, and then applies these questions to technical writing as it existed in the English Renaissance, 1475-1640. (SR)

Factors Influencing the Pursuit of IT Certifications: A Study of Minnesota Public Community and Technical College Students

ERIC Educational Resources Information Center

Wilkens, Eric S.

2013-01-01

This quantitative study attempted to understand the factors that influence Minnesota community and technical college students to pursue Information Technology (IT) certification. The study investigated the problem of determining the factors that influence Minnesota community and technical college students to pursue IT certification along with…

A Question of Trust: Predictive Conditions for Adaptive and Technical Leadership in Educational Contexts

ERIC Educational Resources Information Center

Daly, Alan J.; Chrispeels, Janet

2008-01-01

Recent studies have suggested that educational leaders enacting a balance of technical and adaptive leadership have an effect on increasing student achievement. Technical leadership focuses on problem-solving or first-order changes within existing structures and paradigms. Adaptive leadership involves deep or second-order changes that alter…

Development of a Centralized Automated Scientific and Technical Information Service in the People's Republic of Bulgaria.

ERIC Educational Resources Information Center

Kiratsov, P.

1983-01-01

Discusses the design and organization of the Automated Information Centre, a centralized automated scientific and technical information service established within the main organ of Bulgaria's National System for Scientific and Technical Information, with UNESCO and United Nations Development Program assistance. Problems and perspectives for…

Solutions for data integration in functional genomics: a critical assessment and case study.

PubMed

Smedley, Damian; Swertz, Morris A; Wolstencroft, Katy; Proctor, Glenn; Zouberakis, Michael; Bard, Jonathan; Hancock, John M; Schofield, Paul

2008-11-01

The torrent of data emerging from the application of new technologies to functional genomics and systems biology can no longer be contained within the traditional modes of data sharing and publication with the consequence that data is being deposited in, distributed across and disseminated through an increasing number of databases. The resulting fragmentation poses serious problems for the model organism community which increasingly rely on data mining and computational approaches that require gathering of data from a range of sources. In the light of these problems, the European Commission has funded a coordination action, CASIMIR (coordination and sustainability of international mouse informatics resources), with a remit to assess the technical and social aspects of database interoperability that currently prevent the full realization of the potential of data integration in mouse functional genomics. In this article, we assess the current problems with interoperability, with particular reference to mouse functional genomics, and critically review the technologies that can be deployed to overcome them. We describe a typical use-case where an investigator wishes to gather data on variation, genomic context and metabolic pathway involvement for genes discovered in a genome-wide screen. We go on to develop an automated approach involving an in silico experimental workflow tool, Taverna, using web services, BioMart and MOLGENIS technologies for data retrieval. Finally, we focus on the current impediments to adopting such an approach in a wider context, and strategies to overcome them.

A review and evaluation of the Langley Research Center's Scientific and Technical Information Program: Results of phase 6: The technical report. A survey and analysis

NASA Technical Reports Server (NTRS)

Mccullough, R. A.; Pinelli, T. E.; Pilley, D. D.; Stohrer, F. F.

1982-01-01

Current practice and usage using selected technical reports; literature relative to the sequential, language, and presentation components of technical reports; and NASA technical report publications standards are discussed. The effctiveness of the technical report as a product for information dissemination is considered.

Making intelligent systems team players: Overview for designers

NASA Technical Reports Server (NTRS)

Malin, Jane T.; Schreckenghost, Debra L.

1992-01-01

This report is a guide and companion to the NASA Technical Memorandum 104738, 'Making Intelligent Systems Team Players,' Volumes 1 and 2. The first two volumes of this Technical Memorandum provide comprehensive guidance to designers of intelligent systems for real-time fault management of space systems, with the objective of achieving more effective human interaction. This report provides an analysis of the material discussed in the Technical Memorandum. It clarifies what it means for an intelligent system to be a team player, and how such systems are designed. It identifies significant intelligent system design problems and their impacts on reliability and usability. Where common design practice is not effective in solving these problems, we make recommendations for these situations. In this report, we summarize the main points in the Technical Memorandum and identify where to look for further information.

Support of NASA quality requirements by defense contract administration services regions

NASA Technical Reports Server (NTRS)

Farrar, Hiram D.

1966-01-01

Defense Contract Administration Services Regions (DCASR) quality assurance personnel performing under NASA Letters of Delegation must work closely with the assigned technical representative of the NASA centers. It is realized that technical personnel from the NASA Centers cannot make on-site visits as frequently as they would like to. However, DCASR quality assurance personnel would know the assigned NASA technical representative and should contact him when problems arise. The technical representative is the expert on the hardware and should be consulted on any problem area. It is important that the DCASR quality assurance personnel recommend to the delegating NASA Center any new or improved methods of which they may be aware which would assist in achieving the desired quality and reliability in NASA hardware. NASA expects assignment of competent personnel in the Quality Assurance functional area and is not only buying the individual's technical skill, but also his experience. Suggestions by field personnel can many times up-grade the quality or the hardware.

Translational Challenges in Cardiovascular Tissue Engineering.

PubMed

Emmert, Maximilian Y; Fioretta, Emanuela S; Hoerstrup, Simon P

2017-04-01

Valvular heart disease and congenital heart defects represent a major cause of death around the globe. Although current therapy strategies have rapidly evolved over the decades and are nowadays safe, effective, and applicable to many affected patients, the currently used artificial prostheses are still suboptimal. They do not promote regeneration, physiological remodeling, or growth (particularly important aspects for children) as their native counterparts. This results in the continuous degeneration and subsequent failure of these prostheses which is often associated with an increased morbidity and mortality as well as the need for multiple re-interventions. To overcome this problem, the concept of tissue engineering (TE) has been repeatedly suggested as a potential technology to enable native-like cardiovascular replacements with regenerative and growth capacities, suitable for young adults and children. However, despite promising data from pre-clinical and first clinical pilot trials, the translation and clinical relevance of such TE technologies is still very limited. The reasons that currently limit broad clinical adoption are multifaceted and comprise of scientific, clinical, logistical, technical, and regulatory challenges which need to be overcome. The aim of this review is to provide an overview about the translational problems and challenges in current TE approaches. It further suggests directions and potential solutions on how these issues may be efficiently addressed in the future to accelerate clinical translation. In addition, a particular focus is put on the current regulatory guidelines and the associated challenges for these promising TE technologies.

Meeting the Needs of Career and Technical Education: Observations from Graduates of a High School Health Science Program

ERIC Educational Resources Information Center

Avey, Matthew R.

2012-01-01

Career and Technical education has been around for some time, and has often been shaped by the current economic landscape of the country. While current evolving trends focus on relevance for students in the school setting, a coexistence with college preparation curriculum is now the new trend in modern technical education. New programs have…

Determining the Effectiveness and Evaluating the Implementation Process of a Quality/Performance Circles System Model to Assist in Institutional Decision Making and Problem Solving at Lakeshore Technical Institute.

ERIC Educational Resources Information Center

Ladwig, Dennis J.

During the 1982-83 school year, a quality/performance circles system model was implemented at Lakeshore Technical Institute (LTI) to promote greater participation by staff in decision making and problem solving. All management staff at the college (N=45) were invited to participate in the process, and 39 volunteered. Non-management staff (N=240)…

A Compositional Relevance Model for Adaptive Information Retrieval

NASA Technical Reports Server (NTRS)

Mathe, Nathalie; Chen, James; Lu, Henry, Jr. (Technical Monitor)

1994-01-01

There is a growing need for rapid and effective access to information in large electronic documentation systems. Access can be facilitated if information relevant in the current problem solving context can be automatically supplied to the user. This includes information relevant to particular user profiles, tasks being performed, and problems being solved. However most of this knowledge on contextual relevance is not found within the contents of documents, and current hypermedia tools do not provide any easy mechanism to let users add this knowledge to their documents. We propose a compositional relevance network to automatically acquire the context in which previous information was found relevant. The model records information on the relevance of references based on user feedback for specific queries and contexts. It also generalizes such information to derive relevant references for similar queries and contexts. This model lets users filter information by context of relevance, build personalized views of documents over time, and share their views with other users. It also applies to any type of multimedia information. Compared to other approaches, it is less costly and doesn't require any a priori statistical computation, nor an extended training period. It is currently being implemented into the Computer Integrated Documentation system which enables integration of various technical documents in a hypertext framework.

Preface

NASA Astrophysics Data System (ADS)

Rhodes, J. M.; Lockwood, John P.

Mauna Loa is a volcano of superlatives: it is the largest active volcano on Earth and among the most productive. This volume serves to place on record the current state of our knowledge concerning Mauna Loa at the beginning of the Decade Volcano Project. The scope is broad, encompassing the geologic and exploratory history of the volcano, an overview of its submarine geology, its structure, petrologic and geochemical characteristics, and what Mauna Loa has to tell us about the Hawaiian mantle plume; it covers also remote sensing methods and the use of gravity, seismic and deformational studies for eruption monitoring and forecasting, hazards associated with the volcano, and even the importance of a changing volcanic landscape with a wide spectrum of climate zones as an ecological laboratory. We have made a deliberate effort to present a comprehensive spectrum of current Mauna Loa research by building on a December 1993 symposium at the AGU Fall Meeting that considered (1) what is currently known about Mauna Loa, (2) critical problems that need to be addressed, and (3) the technical means to solve these problems, and by soliciting contributions that were not part of the symposium. We encouraged authors to consider how their papers relate to others in the volume through crossreferencing. The intent was that this monograph should be a book about Mauna Loa rather than a collection of disparate papers.

The Roots of Technical Learning and Thinking: Situating TLT in Schools

ERIC Educational Resources Information Center

Hansen, Ron

2008-01-01

Technical thinking is defined as an aptitude, ingenuity, and affliction for solving practical problems through experience. From the beginning of civilization such thinking has been a significant part of human existence. Learning associated with it is a natural instinct for most people, young and old, who work in a technical field, pursue a…

Students' Strengths and Weaknesses in Evaluating Technical Arguments as Revealed through Implementing Calibrated Peer Review™ in a Bioengineering Laboratory

ERIC Educational Resources Information Center

Volz, Tracy; Saterbak, Ann

2009-01-01

In engineering fields, students are expected to construct technical arguments that demonstrate a discipline's expected use of logic, evidence, and conventions. Many undergraduate bioengineering students struggle to enact the appropriate argument structures when they produce technical posters. To address this problem we implemented Calibrated Peer…

Methodology for Planning Technical Education: With a Case Study of Polytechnics in Bangladesh.

ERIC Educational Resources Information Center

Ritzen, Jozef M.; Balderston, Judith B.

A product of research first begun by one of the authors in Bangladesh, this book develops a comprehensive set of methods for planning technical education. Wherever possible, the authors draw on existing tools, fitting them to the specific context of technical education. When faced with planning problems for which existing methods are ill suited…

Keep Your Small Network Sailing Safely in Dangerous Waters

ERIC Educational Resources Information Center

Semmelroth, Jim

2006-01-01

Asmall library's essential technical problem is that it has to chart a course through the technology shoals without a navigator on board. Small libraries in small towns often have a very low level of technical skill on staff. Furthermore, obtaining skilled technical support can frequently be pretty expensive. Even when one is available, a clever…

WORKING WITH STUDENTS INSIDE AND OUTSIDE THE CLASSROOM IN ADULT BASIC EDUCATION PROGRAMS.

ERIC Educational Resources Information Center

BRAZZIEL, WILLIAM F.

TECHNICAL EDUCATION OF THE ADULT HARD-CORE UNEMPLOYED OFTEN FAILS BECAUSE OF PERSONAL PROBLEMS AND BASIC EDUCATION AND CULTURAL LACKS. A BROAD CONCEPT OF EDUCATION IS ESSENTIAL TO PROGRAMS FOR DEVELOPMENT OF TECHNICAL SKILLS. A COLLEGE PROJECT DESIGNED TO MEET THESE REQUIREMENTS IS PRESENTED. A COMBINATION OF BASIC AND TECHNICAL EDUCATION WITH THE…

Evolving a Regionally-Based Mechanism for the Provision of Technical Knowledge to SMEs: Lessons for Policy

ERIC Educational Resources Information Center

Lean, Jonathan; Tucker, Jonathan

2005-01-01

This paper describes and evaluates a pilot project undertaken in the South West of England to develop a computer-based system for facilitating effective technical knowledge transfer to small and mediumsized enterprises (SMEs). It explores the problem of technical knowledge transfer to SMEs, focusing in particular on the policy context. The…

76 FR 4115 - Request for the Technical Review of the Draft Current Intelligence Bulletin (CIB): Derivation of...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-24

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention [Docket Number NIOSH-156] Request for the Technical Review of the Draft Current Intelligence Bulletin (CIB): Derivation... public review of the draft, Current Intelligence Bulletin (CIB): Derivation of Immediately Dangerous to...

Artificial neural network intelligent method for prediction

NASA Astrophysics Data System (ADS)

Trifonov, Roumen; Yoshinov, Radoslav; Pavlova, Galya; Tsochev, Georgi

2017-09-01

Accounting and financial classification and prediction problems are high challenge and researchers use different methods to solve them. Methods and instruments for short time prediction of financial operations using artificial neural network are considered. The methods, used for prediction of financial data as well as the developed forecasting system with neural network are described in the paper. The architecture of a neural network used four different technical indicators, which are based on the raw data and the current day of the week is presented. The network developed is used for forecasting movement of stock prices one day ahead and consists of an input layer, one hidden layer and an output layer. The training method is algorithm with back propagation of the error. The main advantage of the developed system is self-determination of the optimal topology of neural network, due to which it becomes flexible and more precise The proposed system with neural network is universal and can be applied to various financial instruments using only basic technical indicators as input data.

Big Data Challenges in Climate Science: Improving the Next-Generation Cyberinfrastructure

NASA Technical Reports Server (NTRS)

Schnase, John L.; Lee, Tsengdar J.; Mattmann, Chris A.; Lynnes, Christopher S.; Cinquini, Luca; Ramirez, Paul M.; Hart, Andre F.; Williams, Dean N.; Waliser, Duane; Rinsland, Pamela;

Guidance for modeling causes and effects in environmental problem solving

USGS Publications Warehouse

Armour, Carl L.; Williamson, Samuel C.

1988-01-01

Environmental problems are difficult to solve because their causes and effects are not easily understood. When attempts are made to analyze causes and effects, the principal challenge is organization of information into a framework that is logical, technically defensible, and easy to understand and communicate. When decisionmakers attempt to solve complex problems before an adequate cause and effect analysis is performed there are serious risks. These risks include: greater reliance on subjective reasoning, lessened chance for scoping an effective problem solving approach, impaired recognition of the need for supplemental information to attain understanding, increased chance for making unsound decisions, and lessened chance for gaining approval and financial support for a program/ Cause and effect relationships can be modeled. This type of modeling has been applied to various environmental problems, including cumulative impact assessment (Dames and Moore 1981; Meehan and Weber 1985; Williamson et al. 1987; Raley et al. 1988) and evaluation of effects of quarrying (Sheate 1986). This guidance for field users was written because of the current interest in documenting cause-effect logic as a part of ecological problem solving. Principal literature sources relating to the modeling approach are: Riggs and Inouye (1975a, b), Erickson (1981), and United States Office of Personnel Management (1986).

Defending Against Advanced Persistent Threats Using Game-Theory

PubMed Central

König, Sandra; Schauer, Stefan

2017-01-01

Advanced persistent threats (APT) combine a variety of different attack forms ranging from social engineering to technical exploits. The diversity and usual stealthiness of APT turns them into a central problem of contemporary practical system security, since information on attacks, the current system status or the attacker’s incentives is often vague, uncertain and in many cases even unavailable. Game theory is a natural approach to model the conflict between the attacker and the defender, and this work investigates a generalized class of matrix games as a risk mitigation tool for an advanced persistent threat (APT) defense. Unlike standard game and decision theory, our model is tailored to capture and handle the full uncertainty that is immanent to APTs, such as disagreement among qualitative expert risk assessments, unknown adversarial incentives and uncertainty about the current system state (in terms of how deeply the attacker may have penetrated into the system’s protective shells already). Practically, game-theoretic APT models can be derived straightforwardly from topological vulnerability analysis, together with risk assessments as they are done in common risk management standards like the ISO 31000 family. Theoretically, these models come with different properties than classical game theoretic models, whose technical solution presented in this work may be of independent interest. PMID:28045922

Problems in particle theory. Technical report - 1993--1994

DOE Office of Scientific and Technical Information (OSTI.GOV)

Adler, S.L.; Wilczek, F.

This report is a progress report on the work of two principal investigators in the broad area of particle physics theory, covering their personal work, that of their coworkers, and their proposed work for the future. One author has worked in the past on various topics in field theory and particle physics, among them current algebras, the physics of neutrino induced reactions, quantum electrodynamics (including strong magnetic field processes), the theory of the axial-vector current anomaly, topics in quantum gravity, and nonlinear models for quark confinement. While much of his work has been analytical, all of the projects listed abovemore » (except for the work on gravity) had phases which required considerable computer work as well. Over the next several years, he proposes to continue or initiate research on the following problems: (1) Acceleration algorithms for the Monte Carlo analysis of lattice field and gauge theories, and more generally, new research in computational neuroscience and pattern recognition. (2) Construction of quaternionic generalizations of complex quantum mechanics and field theory, and their application to composite models of quarks and leptons, and to the problem of unifying quantum theories of matter with general relativity. One author has worked on problems in exotic quantum statistics and its applications to condensed matter systems. His work has also continued on the quantum theory of black holes. This has evolved toward understanding properties of quantum field theory and string theory in incomplete regions of flat space.« less

Ground Water Technical Support Center (GWTSC) Annual ...

EPA Pesticide Factsheets

The Ground Water Technical Support Center (GWTSC) is part of the Ground Water and Ecosystems Restoration Division (GWERD), which is based in the Robert S. Kerr Environmental Research Center in Ada, Oklahoma. The GWERD is a research division of U.S. EPA’s National Risk Management Research Laboratory (NRMRL). The GWTSC is one of an interlinked group of specialized Technical Support Centersthat were established under the Technical Support Project (TSP). The GWTSC provides technical support on issues related to groundwater. Specifically, the GWTSC provides technical support to U.S. EPA and State regulators for issues and problems related to:1. subsurface contamination (contaminants in ground water, soils and sediments),2. cross-media transfer (movement of contaminants from the subsurface to other media such as surface water or air), and3. restoration of impacted ecosystems.The GWTSC works with Remedial Project Managers (RPMs) and other decision makers to solve specific problems at Superfund, RCRA (Resource Conservation and Recovery Act), Brownfields sites, and ecosystem restoration sites. The Ground Water Technical Support Center (GWTSC) is part of the Ground Water and Ecosystems Restoration Division (GWERD), which is based in the Robert S. Kerr Environmental Research Center in Ada, Oklahoma. The GWERD is a research division of U.S. EPA’s National Risk Management Research Laboratory (NRMRL). The GWTSC is one of an interlinked group of specialized Technical Suppo

[Flexible ENT endoscopy--video technic].

PubMed

Rasinger, G A; Horak, F

1985-02-01

This study discusses the solutions to the problem of documenting moving processes in the field of otolaryngology. A flexible bronchoscope and video equipment connected to it are presented as a specific solution of the problem, with ample of observations. A technical comparison is used as the basis for a discussion of the pros and cons of the video and film techniques. A successful arrangement of examination facilities illustrates the future of flexible-endoscope techniques in the field of otolaryngology.

Technical management techniques for identification and control of industrial safety and pollution hazards

NASA Technical Reports Server (NTRS)

Campbell, R.; Dyer, M. K.; Hoard, E. G.; Little, D. G.; Taylor, A. C.

1972-01-01

Constructive recommendations are suggested for pollution problems from offshore energy resources industries on outer continental shelf. Technical management techniques for pollution identification and control offer possible applications to space engineering and management.

The astronaut and the banana peel: An EVA retriever scenario

NASA Technical Reports Server (NTRS)

Shapiro, Daniel G.

1989-01-01

To prepare for the problem of accidents in Space Station activities, the Extravehicular Activity Retriever (EVAR) robot is being constructed, whose purpose is to retrieve astronauts and tools that float free of the Space Station. Advanced Decision Systems is at the beginning of a project to develop research software capable of guiding EVAR through the retrieval process. This involves addressing problems in machine vision, dexterous manipulation, real time construction of programs via speech input, and reactive execution of plans despite the mishaps and unexpected conditions that arise in uncontrolled domains. The problem analysis phase of this work is presented. An EVAR scenario is used to elucidate major domain and technical problems. An overview of the technical approach to prototyping an EVAR system is also presented.

Problem-Based Learning: Student Engagement, Learning and Contextualized Problem-Solving. Occasional Paper

ERIC Educational Resources Information Center

Mossuto, Mark

2009-01-01

The adoption of problem-based learning as a teaching method in the advertising and public relations programs offered by the Business TAFE (Technical and Further Education) School at RMIT University is explored in this paper. The effect of problem-based learning on student engagement, student learning and contextualised problem-solving was…

Time to address the problem of post-mortem procurement of organs for transplantation occurring without proper pre-mortem consent.

PubMed

Garwood-Gowers, Austen

2013-09-01

Current cadaveric organ transplant systems allow individuals to be classified as donors after death where they registered wishes in favour of this prior to death. However, systems for registering wishes pertaining to donation fall woefully short of securing proper consent. Furthermore, even jurisdictions which technically require consent to be obtained in order to treat an individual as a donor, allow that consent to be given by next of kin after death in circumstances where there is no evidence of the individual having refused prior to death. This article explores these and related issues with current systems from the perspectives of health law norms, ethics and human rights. It concludes that proper pre-mortem consent ought to be a pre-requisite for post-mortem organ transplantation.

Facilitating access to information in large documents with an intelligent hypertext system

NASA Technical Reports Server (NTRS)

Mathe, Nathalie

1993-01-01

Retrieving specific information from large amounts of documentation is not an easy task. It could be facilitated if information relevant in the current problem solving context could be automatically supplied to the user. As a first step towards this goal, we have developed an intelligent hypertext system called CID (Computer Integrated Documentation) and tested it on the Space Station Freedom requirement documents. The CID system enables integration of various technical documents in a hypertext framework and includes an intelligent context-sensitive indexing and retrieval mechanism. This mechanism utilizes on-line user information requirements and relevance feedback either to reinforce current indexing in case of success or to generate new knowledge in case of failure. This allows the CID system to provide helpful responses, based on previous usage of the documentation, and to improve its performance over time.

Electric fish as natural models for technical sensor systems

NASA Astrophysics Data System (ADS)

von der Emde, Gerhard; Bousack, Herbert; Huck, Christina; Mayekar, Kavita; Pabst, Michael; Zhang, Yi

2009-05-01

Instead of vision, many animals use alternative senses for object detection. Weakly electric fish employ "active electrolocation", during which they discharge an electric organ emitting electrical current pulses (electric organ discharges, EOD). Local EODs are sensed by electroreceptors in the fish's skin, which respond to changes of the signal caused by nearby objects. Fish can gain information about attributes of an object, such as size, shape, distance, and complex impedance. When close to the fish, each object projects an 'electric image' onto the fish's skin. In order to get information about an object, the fish has to analyze the object's electric image by sampling its voltage distribution with the electroreceptors. We now know a great deal about the mechanisms the fish use to gain information about objects in their environment. Inspired by the remarkable capabilities of weakly electric fish in detecting and recognizing objects with their electric sense, we are designing technical sensor systems that can solve similar sensing problems. We applied the principles of active electrolocation to devices that produce electrical current pulses in water and simultaneously sense local current densities. Depending on the specific task, sensors can be designed which detect an object, localize it in space, determine its distance, and measure certain object properties such as material properties, thickness, or material faults. We present first experiments and FEM simulations on the optimal sensor arrangement regarding the sensor requirements e. g. localization of objects or distance measurements. Different methods of the sensor read-out and signal processing are compared.

Using Technology To Enhance Problem Solving and Critical Thinking Skills.

ERIC Educational Resources Information Center

Mingus, Tabitha; Grassl, Richard

1997-01-01

Secondary mathematics teachers participated in a problem-solving course in which technology became a means to develop as teachers and as problem solvers. Findings indicate a delineation between technical competence and metatechnology--thinking about how and when to apply technology to particular problems. (PVD)

A Report by the Governor's Task Force on Vocational and Technical Education.

ERIC Educational Resources Information Center

Governor's Task Force on Vocational and Technical Education, Columbus, OH.

On July 19, 1968, a Task Force on Vocational and Technical Education was created by the governor of Ohio to develop proposals for organization, financing, and legislation. Some major problems to which the Task Force gave attention were: (1) the serious gap between the need for and the availability of vocational and technical education, (2) the…

Technical and Vocational Education in Asia and Oceania. Report of a Regional Seminar (Singapore, Malaysia, November 20-27, 1979).

ERIC Educational Resources Information Center

United Nations Educational, Scientific, and Cultural Organization, Bangkok (Thailand). Regional Office for Education in Asia and Oceania.

This seminar report contains summaries of presentations as well as entire reports and addresses made at the Regional Seminar on Technical and Vocational Education in Asia and Oceania held in Singapore in November 1979. Chapter 1 summarizes the trends, problems, and innovations in technical and vocational education which were identified in…

Minnesota Area Vocational-Technical Institutes. A Plan to Address Declining Enrollments and Resources. Submitted to the Minnesota State Legislature

ERIC Educational Resources Information Center

Minnesota State Board for Vocational Education, St. Paul.

In March 1982, the Minnesota Division of Vocational-Technical Education received requests from State legislators to develop an action plan to address the problems of declining enrollments and resources. In response to this request, a plan was developed whereby area vocational-technical institutes (AVTIs) in the State would (1) promote a process…

Tin Cans Revisited.

ERIC Educational Resources Information Center

Verderber, Nadine L.

1992-01-01

Presents the use of spreadsheets as an alternative method for precalculus students to solve maximum or minimum problems involving surface area and volume. Concludes that students with less technical backgrounds can solve problems normally requiring calculus and suggests sources for additional problems. (MDH)

Airborne Wind Shear Detection and Warning Systems. Fourth Combined Manufacturers' and Technologists' Conference, part 2

NASA Technical Reports Server (NTRS)

Vicroy, Dan D. (Compiler); Bowles, Roland L. (Compiler); Passman, Robert H. (Compiler)

1992-01-01

The Fourth Combined Manufacturers' and Technologists' Conference was hosted jointly by NASA Langley Research Center (LaRC) and the Federal Aviation Administration (FAA) in Williamsburg, Virginia, on April 14-16, 1992. The meeting was co-chaired by Dr. Roland Bowles of LaRC and Bob Passman of the FAA. The purpose of the meeting was to transfer significant ongoing results of the NASA/FAA Joint Airborne Wind Shear Program to the technical industry and to pose problems of current concern to the combined group. It also provided a forum for manufacturers to review forward-look technology concepts and for technologists to gain an understanding of the problems encountered by the manufacturers during the development of airborne equipment and the FAA certification requirements. The present document has been compiled to record the essence of the technology updates and discussions which follow each.

Captive breeding of pangolins: current status, problems and future prospects.

PubMed

Hua, Liushuai; Gong, Shiping; Wang, Fumin; Li, Weiye; Ge, Yan; Li, Xiaonan; Hou, Fanghui

2015-01-01

Pangolins are unique placental mammals with eight species existing in the world, which have adapted to a highly specialized diet of ants and termites, and are of significance in the control of forest termite disaster. Besides their ecological value, pangolins are extremely important economic animals with the value as medicine and food. At present, illegal hunting and habitat destruction have drastically decreased the wild population of pangolins, pushing them to the edge of extinction. Captive breeding is an important way to protect these species, but because of pangolin's specialized behaviors and high dependence on natural ecosystem, there still exist many technical barriers to successful captive breeding programs. In this paper, based on the literatures and our practical experience, we reviewed the status and existing problems in captive breeding of pangolins, including four aspects, the naturalistic habitat, dietary husbandry, reproduction and disease control. Some recommendations are presented for effective captive breeding and protection of pangolins.

Assessment of the NASA Space Shuttle Program's Problem Reporting and Corrective Action System

NASA Technical Reports Server (NTRS)

Korsmeryer, D. J.; Schreiner, J. A.; Norvig, Peter (Technical Monitor)

2001-01-01

This paper documents the general findings and recommendations of the Design for Safety Programs Study of the Space Shuttle Programs (SSP) Problem Reporting and Corrective Action (PRACA) System. The goals of this Study were: to evaluate and quantify the technical aspects of the SSP's PRACA systems, and to recommend enhancements addressing specific deficiencies in preparation for future system upgrades. The Study determined that the extant SSP PRACA systems accomplished a project level support capability through the use of a large pool of domain experts and a variety of distributed formal and informal database systems. This operational model is vulnerable to staff turnover and loss of the vast corporate knowledge that is not currently being captured by the PRACA system. A need for a Program-level PRACA system providing improved insight, unification, knowledge capture, and collaborative tools was defined in this study.

Development of 3D Atlas of Metalworking Equipment

NASA Astrophysics Data System (ADS)

Yevgenyevna Maslennikova, Olga; Borisovna Nazarova, Olga; Aleksandrovna Chudinova, Yulia

2018-05-01

The paper is dedicated to solving the problem of developing innovative educational systems able to train personnel of complex and dangerous manufacturing industries (such as in metallurgy) to control the process not only under regular conditions, but in emergency and pre-emergency situations as well. At that, such educational systems shall transform training of future and current engineers into a professional activity, model both subject matter and social content of their professional labor. Key characteristics of a 3D atlas of equipment as an educational system are given, as it provides immersion of trainees into professional environment. Requirements for such systems are defined (functional, information, software and technical). Stages of development of a 3D atlas of equipment as an automated system are given, allowing one to get closer to yet another problem that of IT specialist training so that they are able to design, implement and deploy such systems.

Aviation Safety/Automation Program Conference

NASA Technical Reports Server (NTRS)

Morello, Samuel A. (Compiler)

1990-01-01

The Aviation Safety/Automation Program Conference - 1989 was sponsored by the NASA Langley Research Center on 11 to 12 October 1989. The conference, held at the Sheraton Beach Inn and Conference Center, Virginia Beach, Virginia, was chaired by Samuel A. Morello. The primary objective of the conference was to ensure effective communication and technology transfer by providing a forum for technical interchange of current operational problems and program results to date. The Aviation Safety/Automation Program has as its primary goal to improve the safety of the national airspace system through the development and integration of human-centered automation technologies for aircraft crews and air traffic controllers.

The Establishment of a New Friction Stir Welding Process Development Facility at NASA/MSFC

NASA Technical Reports Server (NTRS)

Carter, Robert W.

2009-01-01

Full-scale weld process development is being performed at MSFC to develop the tools, fixtures, and facilities necessary for Ares I production. Full scale development in-house at MSFC fosters technical acuity within the NASA engineering community, and allows engineers to identify and correct tooling and equipment shortcomings before they become problems on the production floor. Finally, while the new weld process development facility is currently being outfitted in support of Ares I development, it has been established to support all future Constellation Program needs. In particular, both the RWT and VWT were sized with the larger Ares V hardware in mind.

Supercritical fluid chromatography: a promising alternative to current bioanalytical techniques.

PubMed

Dispas, Amandine; Jambo, Hugues; André, Sébastien; Tyteca, Eva; Hubert, Philippe

2018-01-01

During the last years, chemistry was involved in the worldwide effort toward environmental problems leading to the birth of green chemistry. In this context, green analytical tools were developed as modern Supercritical Fluid Chromatography in the field of separative techniques. This chromatographic technique knew resurgence a few years ago, thanks to its high efficiency, fastness and robustness of new generation equipment. These advantages and its easy hyphenation to MS fulfill the requirements of bioanalysis regarding separation capacity and high throughput. In the present paper, the technical aspects focused on bioanalysis specifications will be detailed followed by a critical review of bioanalytical supercritical fluid chromatography methods published in the literature.

Obstacle detectors for automated transit vehicles: A technoeconomic and market analysis

NASA Technical Reports Server (NTRS)

Lockerby, C. E.

1979-01-01

A search was conducted to identify the technical and economic characteristics of both NASA and nonNASA obstacle detectors. The findings, along with market information were compiled and analyzed for consideration by DOT and NASA in decisions about any future automated transit vehicle obstacle detector research, development, or applications project. Currently available obstacle detectors and systems under development are identified by type (sonic, capacitance, infrared/optical, guided radar, and probe contact) and compared with the three NASA devices selected as possible improvements or solutions to the problems in existing obstacle detection systems. Cost analyses and market forecasts individually for the AGT and AMTV markets are included.

Biomaterials in the treatment of anal fistula: hope or hype?

PubMed

Scoglio, Daniele; Walker, Avery S; Fichera, Alessandro

2014-12-01

Anal fistula (AF) presents a chronic problem for patients and colorectal surgeons alike. Surgical treatment may result in impairment of continence and long-term risk of recurrence. Treatment options for AFs vary according to their location and complexity. The ideal approach should result in low recurrence rates and minimal impact on continence. New technical approaches involving biologically derived products such as biological mesh, fibrin glue, fistula plug, and stem cells have been applied in the treatment of AF to improve outcomes and decrease recurrence rates and the risk of fecal incontinence. In this review, we will highlight the current evidence and describe our personal experience with these novel approaches.

Pollution of surface water in Europe

PubMed Central

Key, A.

1956-01-01

This paper discusses pollution of surface water in 18 European countries. For each an account is given of its physical character, population, industries, and present condition of water supplies; the legal, administrative, and technical means of controlling pollution are then described, and an outline is given of current research on the difficulties peculiar to each country. A general discussion of various aspects common to the European problem of water pollution follows; standards of quality are suggested; some difficulties likely to arise in the near future are indicated, and international collaboration, primarily by the exchange of information, is recommended to check or forestall these trends. PMID:13374532

Current molecular and emerging nanobiotechnology approaches for the detection of microbial pathogens.

PubMed

Theron, Jacques; Eugene Cloete, Thomas; de Kwaadsteniet, Michele

2010-11-01

Waterborne microbial diseases are escalating worldwide increasing the need for powerful and sensitive diagnostics tools. Molecular methodologies, including immunological and nucleic acid-based methods, have only recently been applied in the water sector. Advances in nanotechnology and nanomaterials have opened the door for the development of new diagnostic tools with increased sensitivity and speed, and reduced cost and labor. Quantum dots, flo dots, gold nanoparticles, magnetic nanoparticles, carbon nanotubes, nanowires, and nanocantilevers, with their unique optical and physical properties, have already been applied in nanodiagnostics. Nanobiotechnology, once remaining technical and practical problems has been addressed, will play an important role in the detection of microbial pathogens.

Using case studies to teach an engineering technology technical writing class

NASA Technical Reports Server (NTRS)

Green, M. M.

1981-01-01

The use of the case method in teaching various technical communication skills is described. Features of the method considered include: solving communication problems, identifying an audience, planning written communications, presenting written communications, and using visual aids.

An Approach to the Reuse of Technical Materials for Educational Purposes

NASA Technical Reports Server (NTRS)

Levinstein, Irwin; Bryant, Wayne H. (Technical Monitor)

2001-01-01

This project addresses the problem of transforming technical documents intended for a technical audience into educational materials directed toward segments of the general public. In particular it addresses the conversion of technical material into Internet based educational materials. A major consideration of the project is the conservation of the time of subject matter experts in the organization in recognition of the fact that such experts are likely to be more valuable to the organization for purposes other than the production of educational outreach.

Problem Solving. Research Brief

ERIC Educational Resources Information Center

Muir, Mike

2004-01-01

No longer solely the domain of Mathematics, problem solving permeates every area of today's curricula. Ideally students are applying heuristics strategies in varied contexts and novel situations in every subject taught. The ability to solve problems is a basic life skill and is essential to understanding technical subjects. Problem-solving is a…

PREFACE: 2nd Russia-Japan-USA Symposium on the Fundamental and Applied Problems of Terahertz Devices and Technologies (RJUS TeraTech - 2013)

NASA Astrophysics Data System (ADS)

Karasik, Valeriy; Ryzhii, Viktor; Yurchenko, Stanislav

2014-03-01

The 2nd Russia-Japan-USA Symposium 'The Fundamental & Applied Problems of Terahertz Devices & Technologies' (RJUS TeraTech - 2013) Bauman Moscow State Technical University Moscow, Russia, 3-6 June, 2013 The 2nd Russia-Japan-USA Symposium 'The Fundamental & Applied Problems of Terahertz Devices & Technologies' (RJUS TeraTech - 2013) was held in Bauman Moscow State Technical University on 3-6 June 2013 and was devoted to modern problems of terahertz optical technologies. RJUS TeraTech 2013 was organized by Bauman Moscow State Technical University in cooperation with Tohoku University (Sendai, Japan) and University of Buffalo (The State University of New York, USA). The Symposium was supported by Bauman Moscow State Technical University (Moscow, Russia) and Russian Foundation for Basic Research (grant number 13-08-06100-g). RJUS TeraTech - 2013 became a foundation for sharing and discussing modern and promising achievements in fundamental and applied problems of terahertz optical technologies, devices based on grapheme and grapheme strictures, condensed matter of different nature. Among participants of RJUS TeraTech - 2013, there were more than 100 researchers and students from different countries. This volume contains proceedings of the 2nd Russia-Japan-USA Symposium 'The Fundamental & Applied Problems of Terahertz Devices & Technologies'. Valeriy Karasik, Viktor Ryzhii and Stanislav Yurchenko Bauman Moscow State Technical University Symposium chair Anatoliy A Aleksandrov, Rector of BMSTU Symposium co-chair Valeriy E Karasik, Head of the Research and Educational Center 'PHOTONICS AND INFRARED TECHNOLOGY' (Russia) Invited Speakers Taiichi Otsuji, Research Institute of Electrical Communication, Tohoku University, Sendai, Japan Akira Satou, Research Institute of Electrical Communication, Tohoku University, Sendai, Japan Michael Shur, Electrical, Computer and System Engineering and Physics, Applied Physics, and Astronomy, Rensselaer Polytechnic Institute, NY, USA Natasha Kirova, University Paris-Sud, France Andrei Sergeev, Department of Electrical Engineering, The University of Buffalo, The State University of New Your, Buffalo, NY, USA Magnus Willander, Linkoping University (LIU), Department of Science and Technology, Linkopings, Sweden Dmitry R Khohlov, Physical Faculty, Lomonosov Moscow State University, Russia Vladimir L Vaks, Institute for Physics of Microstructures of Russian Academy of Sciences, Russia

A Case Study in Locating the Architectural Roots of Technical Debt

DTIC Science & Technology

2015-01-16

SoftServe is using, such as SonarQube ? RQ3: Is it possible to quantify the return on investment of removing architecture debts? In other words, is it possible...the Titan tool chain did differ significantly from the files reported as sources of technical debt by SonarQube . The precision and recall of Titan...tools such as SonarQube . But not all of these code problems are certain to cause maintenance or quality problems. In fact, no existing work has been

[Medical surveillance in university: organizational difficulties, legal problems, scientific e technical specificities. Experience of University of Milan Bicocca].

PubMed

D'Orso, M I; Giuliani, C; Assini, R; Riva, M A; Cesana, G

2012-01-01

Our research describes activities of Occupational Health carried out during last year in University of Milan Bicocca by Occupational Doctors. We describe results of medical surveillance in 1153 employees or students exposed to occupational risks for health and safety. We report results obtained, technical difficulties, organizational problems, and preventive actions decided to improve functionality of our activity. Students seem to be less protected and consequently seem to have higher professional safety and health risks.

RIACS/USRA

NASA Technical Reports Server (NTRS)

Oliger, Joseph

1993-01-01

The Research Institute for Advanced Computer Science (RIACS) was established by the Universities Space Research Association (USRA) at the NASA Ames Research Center (ARC) on 6 June 1983. RIACS is privately operated by USRA, a consortium of universities with research programs in the aerospace sciences, under contract with NASA. The primary mission of RIACS is to provide research and expertise in computer science and scientific computing to support the scientific missions of NASA ARC. The research carried out at RIACS must change its emphasis from year to year in response to NASA ARC's changing needs and technological opportunities. A flexible scientific staff is provided through a university faculty visitor program, a post doctoral program, and a student visitor program. Not only does this provide appropriate expertise but it also introduces scientists outside of NASA to NASA problems. A small group of core RIACS staff provides continuity and interacts with an ARC technical monitor and scientific advisory group to determine the RIACS mission. RIACS activities are reviewed and monitored by a USRA advisory council and ARC technical monitor. Research at RIACS is currently being done in the following areas: Parallel Computing, Advanced Methods for Scientific Computing, High Performance Networks and Technology, and Learning Systems. Parallel compiler techniques, adaptive numerical methods for flows in complicated geometries, and optimization were identified as important problems to investigate for ARC's involvement in the Computational Grand Challenges of the next decade.

Career and Technical Education Administration: Requirements, Certification/Licensure, and Preparation

ERIC Educational Resources Information Center

Zirkle, Christopher J.; Jeffery, Jeremy O.

2017-01-01

The current climate of career and technical administration requirements in all 50 states was detailed and explored. An increasing number of states are not requiring specific career-technical administration certification/licensure in order to oversee secondary career and technical education (CTE) programs, with more states moving towards a general…

Numerical Problems and Agent-Based Models for a Mass Transfer Course

ERIC Educational Resources Information Center

Murthi, Manohar; Shea, Lonnie D.; Snurr, Randall Q.

2009-01-01

Problems requiring numerical solutions of differential equations or the use of agent-based modeling are presented for use in a course on mass transfer. These problems were solved using the popular technical computing language MATLABTM. Students were introduced to MATLAB via a problem with an analytical solution. A more complex problem to which no…

New developments and applications of intense pulsed radiation sources at Sandia National Laboratories

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cook, D.

In the past thirty-six months, tremendous strides have been made in x-ray production using high-current z-pinches. Today, the x-ray energy (1.9 MJ) and power (200 TW) output of the Z accelerator (formerly PBFA-II) is the largest available in the laboratory. These z-pinch x-ray sources are being developed for research into the physics of high energy density plasmas of interest in weapon behavior and in inertial confinement fusion. Beyond the Z accelerator current of 20 MA, an extrapolation to the X-1 accelerator level of 60 MA may have the potential to drive high-yield ICF reactions at affordable cost if several challengingmore » technical problems can be overcome. New developments have also taken place at Sandia in the area of high current, mm-diameter electron beams for advanced hydrodynamic radiography. On SABRE, x-ray spot diameters were less than 2 mm with a dose of 100 R at 1 meter in a 40 ns pulse.« less

Whys and hows of in-house writing

NASA Technical Reports Server (NTRS)

Lane, J. C.

1981-01-01

The combining of requisite technical knowledge with requisite writing ability is addressed. Considerations in the development of in-house writing courses, in-plant training, are presented and evaluated. Specific problems in past methodology are also detailed. It is suggested that teachers of technical writing should be technical people themselves, preferably with working experience in industry or business; the training provided should be user-oriented, not theory oriented.

KIVA-hpFE. Predictive turbulent reactive and multiphase flow in engines - An Overview

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carrington, David Bradley

2016-05-23

Research and development of KIVA-hpFE for turbulent reactive and multiphase flow particularly as related to engine modeling program has relevance to National energy security and climate change. Climate change is a source problem, and energy national security is consumption of petroleum products problem. Accurately predicting engine processes leads to, lower greenhouse gas (GHG) emission, where engines in the transportation sector currently account for 26% of the U.S. GHG emissions. Less dependence on petroleum products leads to greater energy security. By Environmental Protection Agency standards, some vehicles are now reaching 42 to the 50 mpg mark. These are conventional gasoline engines.more » Continued investment and research into new technical innovations, the potential exists to save more than 4 million barrels of oil per day or approximately $200 to $400 million per day. This would be a significant decrease in emission and use of petroleum and a very large economic stimulus too! It is estimated with further advancements in combustion, the current emissions can be reduced up to 40%. Enabling better understanding of fuel injection and fuel-air mixing, thermodynamic combustion losses, and combustion/emission formation processes enhances our ability to help solve both problems. To provide adequate capability for accurately simulating these processes, minimize time and labor for development of engine technology, are the goals of our KIVA development program.« less

Ethical and Professional Issues in Career Assessment on the Internet.

ERIC Educational Resources Information Center

Barak, Azy

2003-01-01

Concerns about Internet-based career assessments include the following: users' technical skill level, lack of screening, psychological factors, cultural bias, unprotected results, technical failures, lack of standardization, digital divide, interpretation problems, outdated tests, copyright violations, administrator qualifications, and hidden…

Research Problems in Data Curation: Outcomes from the Data Curation Education in Research Centers Program

NASA Astrophysics Data System (ADS)

Palmer, C. L.; Mayernik, M. S.; Weber, N.; Baker, K. S.; Kelly, K.; Marlino, M. R.; Thompson, C. A.

2013-12-01

The need for data curation is being recognized in numerous institutional settings as national research funding agencies extend data archiving mandates to cover more types of research grants. Data curation, however, is not only a practical challenge. It presents many conceptual and theoretical challenges that must be investigated to design appropriate technical systems, social practices and institutions, policies, and services. This presentation reports on outcomes from an investigation of research problems in data curation conducted as part of the Data Curation Education in Research Centers (DCERC) program. DCERC is developing a new model for educating data professionals to contribute to scientific research. The program is organized around foundational courses and field experiences in research and data centers for both master's and doctoral students. The initiative is led by the Graduate School of Library and Information Science at the University of Illinois at Urbana-Champaign, in collaboration with the School of Information Sciences at the University of Tennessee, and library and data professionals at the National Center for Atmospheric Research (NCAR). At the doctoral level DCERC is educating future faculty and researchers in data curation and establishing a research agenda to advance the field. The doctoral seminar, Research Problems in Data Curation, was developed and taught in 2012 by the DCERC principal investigator and two doctoral fellows at the University of Illinois. It was designed to define the problem space of data curation, examine relevant concepts and theories related to both technical and social perspectives, and articulate research questions that are either unexplored or under theorized in the current literature. There was a particular emphasis on the Earth and environmental sciences, with guest speakers brought in from NCAR, National Snow and Ice Data Center (NSIDC), and Rensselaer Polytechnic Institute. Through the assignments, students constructed dozens of research questions informed by class readings, presentations, and discussions. A technical report is in progress on the resulting research agenda covering: data standards; infrastructure; research context; data reuse; sharing and access; preservation; and conceptual foundations. This presentation will discuss the agenda and its importance for the geosciences, highlighting high priority research questions. It will also introduce the related research to be undertaken by two DCERC doctoral students at NCAR during the 2013-2014 academic year and other data curation research in progress by the doctoral DCERC team.

Crowdsourcing for Challenging Technical Problems - It Works!

NASA Technical Reports Server (NTRS)

Davis, Jeffrey R.

2011-01-01

The NASA Johnson Space Center Space Life Sciences Directorate (SLSD) and Wyle Integrated Science and Engineering (Wyle) will conduct a one-day business cluster at the 62nd IAC so that IAC attendees will understand the benefits of open innovation (crowdsourcing), review successful results of conducting technical challenges in various open innovation projects, and learn how an organization can effectively deploy these new problem solving tools to innovate more efficiently and effectively. Results from both the SLSD open innovation pilot program and the open innovation workshop conducted by the NASA Human Health and Performance Center will be discussed. NHHPC members will be recruited to participate in the business cluster (see membership http://nhhpc.nasa.gov) and as IAF members. Crowdsourcing may be defined as the act of outsourcing tasks that are traditionally performed by an employee or contractor to an undefined, generally large group of people or community (a crowd) in the form of an open call. The open call may be issued by the organization wishing to find a solution to a particular problem or complete a task, or by an open innovation service provider on behalf of that organization. In 2008, the SLSD, with the support of Wyle, established and implemented pilot projects in open innovation (crowdsourcing) to determine if these new internet-based platforms could indeed find solutions to difficult technical challenges. These unsolved technical problems were converted to problem statements, called Challenges by some open innovation service providers, and were then posted externally to seek solutions to these problems. In addition, an open call was issued internally to NASA employees Agency wide (11 Field Centers and NASA HQ) using an open innovation service provider crowdsourcing platform to post NASA challenges from each Center for the others to propose solutions). From 2008 to 2010, the SLSD issued 34 challenges, 14 externally and 20 internally. The 14 external problems or challenges were posted through three different vendors: InnoCentive, yet2.com and TopCoder. The 20 internal challenges were conducted using the InnoCentive crowdsourcing platform designed for use internal to an organization and customized for NASA use, and promoted as NASA@Work. The results were significant. Of the seven InnoCentive external challenges, two full and five partial awards were made in complex technical areas such as predicting solar flares and long-duration food packaging.

Psychosocial dimensions of solving an indoor air problem.

PubMed

Lahtinen, Marjaana; Huuhtanen, Pekka; Kähkönen, Erkki; Reijula, Kari

2002-03-01

This investigation focuses on the psychological and social dimensions of managing and solving indoor air problems. The data were collected in nine workplaces by interviews (n = 85) and questionnaires (n = 375). Indoor air problems in office environments have traditionally utilized industrial hygiene or technical expertise. However, indoor air problems at workplaces are often more complex issues to solve. Technical questions are inter-related with the dynamics of the work community, and the cooperation and interaction skills of the parties involved in the solving process are also put to the test. In the present study, the interviewees were very critical of the process of solving the indoor air problem. The responsibility for coordinating the problem-managing process was generally considered vague, as were the roles and functions of the various parties. Communication problems occurred and rumors about the indoor air problem circulated widely. Conflicts were common, complicating the process in several ways. The research focused on examining different ways of managing and resolving an indoor air problem. In addition, reference material on the causal factors of the indoor air problem was also acquired. The study supported the hypothesis that psychosocial factors play a significant role in indoor air problems.

Cybersecurity vulnerabilities in medical devices: a complex environment and multifaceted problem

PubMed Central

Williams, Patricia AH; Woodward, Andrew J

2015-01-01

The increased connectivity to existing computer networks has exposed medical devices to cybersecurity vulnerabilities from which they were previously shielded. For the prevention of cybersecurity incidents, it is important to recognize the complexity of the operational environment as well as to catalog the technical vulnerabilities. Cybersecurity protection is not just a technical issue; it is a richer and more intricate problem to solve. A review of the factors that contribute to such a potentially insecure environment, together with the identification of the vulnerabilities, is important for understanding why these vulnerabilities persist and what the solution space should look like. This multifaceted problem must be viewed from a systemic perspective if adequate protection is to be put in place and patient safety concerns addressed. This requires technical controls, governance, resilience measures, consolidated reporting, context expertise, regulation, and standards. It is evident that a coordinated, proactive approach to address this complex challenge is essential. In the interim, patient safety is under threat. PMID:26229513

Cybersecurity vulnerabilities in medical devices: a complex environment and multifaceted problem.

PubMed

Williams, Patricia Ah; Woodward, Andrew J

2015-01-01

The increased connectivity to existing computer networks has exposed medical devices to cybersecurity vulnerabilities from which they were previously shielded. For the prevention of cybersecurity incidents, it is important to recognize the complexity of the operational environment as well as to catalog the technical vulnerabilities. Cybersecurity protection is not just a technical issue; it is a richer and more intricate problem to solve. A review of the factors that contribute to such a potentially insecure environment, together with the identification of the vulnerabilities, is important for understanding why these vulnerabilities persist and what the solution space should look like. This multifaceted problem must be viewed from a systemic perspective if adequate protection is to be put in place and patient safety concerns addressed. This requires technical controls, governance, resilience measures, consolidated reporting, context expertise, regulation, and standards. It is evident that a coordinated, proactive approach to address this complex challenge is essential. In the interim, patient safety is under threat.

Problems of systems dataware using optoelectronic measuring means of linear displacement

NASA Astrophysics Data System (ADS)

Bazykin, S. N.; Bazykina, N. A.; Samohina, K. S.

2017-10-01

Problems of the dataware of the systems with the use of optoelectronic means of the linear displacement are considered in the article. The classification of the known physical effects, realized by the means of information-measuring systems, is given. The organized analysis of information flows in technical systems from the standpoint of determination of inaccuracies of measurement and management was conducted. In spite of achieved successes in automation of machine-building and instruments-building equipment in the field of dataware of the technical systems, there are unresolved problems, concerning the qualitative aspect of the production process. It was shown that the given problem can be solved using optoelectronic lazer information-measuring systems. Such information-measuring systems are capable of not only executing the measuring functions, but also solving the problems of management and control during processing, thereby guaranteeing the quality of final products.

Interview: Mr. Stephen Chee, team leader, UNFPA country support team (CST) for the South Pacific.

PubMed

1993-09-01

The UNFPA country support team (CST) for the South Pacific is the action-arm at the regional level of the new Technical Support Services arrangement introduced by the agency. Operational since April 1993, the CST currently covers the following Pacific island countries or territories: the Cook Islands, the Federated States of Micronesia, Fiji, Kiribati, Marshall Islands, Nauru, Niue, Palau, Papua New Guinea, Samoa, Solomon Islands, Tokelau, Tonga, Tuvalu, and Vanuatu. The CST office is located in Suva, Fiji, with the main goal of strengthening national capacity and building self-reliance in the countries of the region. The office in Suva is currently staffed by six highly qualified advisors with extensive experience in the population and related fields; two more advisors are expected to join the Team in early 1994. The Team is well equipped to provide countries and territories of the region with a wide range of technical support services ranging from ad hoc technical advisory services to the conceptualization and development of comprehensive population policies and programs. Services are offered in the areas of basic data collection, processing, and research in population dynamics; population policy formulation, evaluation, and implementation; family planning and maternal-child health; information, education, and communication; women in population and development; and population program management. The team also plays an advocacy role in mainstreaming population concerns into the programs and activities of international, regional, and national organizations. The team leader responds to questions about population problems experienced by the countries served, the scope of UNFPA assistance to country governments in the subregion, the importance of population information in the subregion, and how Asia-Pacific POPIN may help the team and countries served.

Mise au point d'un bouchon d'oreille "intelligent"

NASA Astrophysics Data System (ADS)

Voix, Jeremie

Many workers are exposed to noise levels high enough to put them at risk of losing their hearing. However, noise reduction at the source, when technically feasible, is often difficult to implement for economical reasons. Therefore, individual hearing protection remains the most widespread solution in practice. Unfortunately, the hearing protectors currently available on the market are seldom worn continuously as they should be (because they are not very comfortable or must be removed to communicate) and do not match the worker's need for protection (because their actual attenuation is generally unknown). This doctorate thesis work, carried out in close collaboration with SONOMAX HEARING HEALTHCARE I NC., had the general objective to develop a smart earplug that would solve the problems associated with current hearing protection devices thereby effectively preventing noise induced hearing loss in the industrial environment. The issues associated to this development have been formulated in details under the Health and Safety aspect (non-continuous wearing of the hearing protector and un-adapted protection), technical aspects (development of an earplug that is comfortable both from the physical and sound perception points of view and whose performances are measurable) and scientific aspects (modeling of physical systems, signal processing, instrumentation and measurement techniques). The technical developments have resulted in a custom earplug that is instantly fitted to the wearer's ear by silicone injection. Its acoustical performance can be measured using a microphone probe while the attenuation can be adapted to the user's need by the insertion through the earplug of passive acoustical filters. The scientific developments have resulted in the prediction of the attenuation of the earplug from the Noise Reduction measurement and in the prediction of the filtered earplug attenuation.

Problem? "No Problem!" Solving Technical Contradictions

ERIC Educational Resources Information Center

Kutz, K. Scott; Stefan, Victor

2007-01-01

TRIZ (pronounced TREES), the Russian acronym for the theory of inventive problem solving, enables a person to focus his attention on finding genuine, potential solutions in contrast to searching for ideas that "may" work through a happenstance way. It is a patent database-backed methodology that helps to reduce time spent on the problem,…

Independence Pending: Teacher Behaviors Preceding Learner Problem Solving

ERIC Educational Resources Information Center

Roesler, Rebecca A.

2017-01-01

The purposes of the present study were to identify the teacher behaviors that preceded learners' active participation in solving musical and technical problems and describe learners' roles in the problem-solving process. I applied an original model of problem solving to describe the behaviors of teachers and students in 161 rehearsal frames…

Beyond Currents: The Next Phase in GOCE Oceanographic Research

NASA Astrophysics Data System (ADS)

Bingham, Rory J.; Haines, Keith; Hughes, Chris W.

2015-03-01

GOCE has mapped the surface currents of the world’s oceans in unprecedented detail. What is now required is a concerted effort by the oceanographic community to go beyond currents and exploit these measurements for societal benefit. The aim of this review paper is to explore the ways in which this may be achieved, particularly in relation to ocean modelling. With the final gravity models now released, we begin by reviewing the progress GOCE has in made in measuring the ocean’s mean dynamic topography and associated ocean currents. In the light of this progress, we then examine the important oceanographic questions and technical challenges of societal relevance that can potentially be addressed with the help of the observations GOCE has delivered and outline the benefits their solution could deliver. Benefits may either be direct, through, for example, improved ocean modelling and operational forecasting, or indirect through improved understanding of particular oceanographic processes, such as heat transport by the Atlantic meridional overturning circulation or sea level change. Next we consider the technical challenges that must be overcome in bringing GOCE to bear on these problems. In particular we examine how best to use GOCE error information, this being an especially uncertain, underdeveloped and challenging area of investigation, due largely to the fact that such information has not been previously available to the user community. Finally, we consider measures of success; that is, metrics that can be used to quantify any GOCE-enabled progress that the community makes towards answering these questions. Such metrics are essential for demonstrating progress. Ultimately, with this review paper, we aim to paint a road map that will act as an impetus to the oceanography community to exploit the yet untapped potential of GOCE for scientific understanding and societal benefit.

Murray Gell-Mann, the Eightfold Way, Quarks, and Quantum Chromodynamics

Science.gov Websites

the Web. Documents: The Eightfold Way: A Theory of Strong Interaction Symmetry, DOE Technical Report : 155-156, February 10, 1964 Octet Enhancement, DOE Technical Report, August 1964 Triplets and Triality , DOE Technical Report, August 1964 Current Algebra, DOE Technical Report, October 1966 Relativistic

Open Source in Education

ERIC Educational Resources Information Center

Lakhan, Shaheen E.; Jhunjhunwala, Kavita

2008-01-01

Educational institutions have rushed to put their academic resources and services online, beginning the global community onto a common platform and awakening the interest of investors. Despite continuing technical challenges, online education shows great promise. Open source software offers one approach to addressing the technical problems in…

Technician Education Yearbook 1984.

ERIC Educational Resources Information Center

Prakken Publications, Inc., Ann Arbor, MI.

This yearbook deals with technician education. Included in a section on new issues, problems, and proposals for technician education are the following papers: "High Technology Challenges the Vocational-Technical Curriculum," by Walter J. Brooking; "Assessment of Technical Competency," by Gordon C. McMahon; "Industry and Education Cooperation…

Orbiting space debris: Dangers, measurement and mitigation

NASA Astrophysics Data System (ADS)

McNutt, Ross T.

1992-06-01

Space debris is a growing environmental problem. Accumulation of objects in earth orbit threatens space systems through the possibility of collisions and runaway debris multiplication. The amount of debris in orbit is uncertain due to the lack of information on the population of debris between 1 and 10 centimeters diameter. Collisions with debris even smaller than 1 cm can be catastrophic due to the high orbital velocities involved. Research efforts are under way at NASA, United States Space Command and the Air Force Phillips Laboratory to detect and catalog the debris population in near-earth space. Current international and national laws are inadequate to control the proliferation of space debris. Space debris is a serious problem with large economic, military, technical and diplomatic components. Actions need to be taken now to: determine the full extent of the orbital debris problem; accurately predict the future evolution of the debris population; decide the extent of the debris mitigation procedures required; implement these policies on a global basis via an international treaty. Action must be initiated now, before the loss of critical space systems such as the space shuttle or the space station.

Machine Learning Approach to Automated Quality Identification of Human Induced Pluripotent Stem Cell Colony Images.

PubMed

Joutsijoki, Henry; Haponen, Markus; Rasku, Jyrki; Aalto-Setälä, Katriina; Juhola, Martti

2016-01-01

The focus of this research is on automated identification of the quality of human induced pluripotent stem cell (iPSC) colony images. iPS cell technology is a contemporary method by which the patient's cells are reprogrammed back to stem cells and are differentiated to any cell type wanted. iPS cell technology will be used in future to patient specific drug screening, disease modeling, and tissue repairing, for instance. However, there are technical challenges before iPS cell technology can be used in practice and one of them is quality control of growing iPSC colonies which is currently done manually but is unfeasible solution in large-scale cultures. The monitoring problem returns to image analysis and classification problem. In this paper, we tackle this problem using machine learning methods such as multiclass Support Vector Machines and several baseline methods together with Scaled Invariant Feature Transformation based features. We perform over 80 test arrangements and do a thorough parameter value search. The best accuracy (62.4%) for classification was obtained by using a k-NN classifier showing improved accuracy compared to earlier studies.

The Formation of the Urban Environment in the West Siberian Oil and Gas Region: Problems and Challenges

NASA Astrophysics Data System (ADS)

Bauer, N. V.; Speranskaya, N. I.; Shabatura, L. N.; Iatsevich, O. E.

2016-10-01

The article deals with the problems faced by the person in relation to the culture of creating a sustainable urban environment. The urban environment is seen as space of human existence, influencing its spiritual and physical health. All the experts involved in the urban environment, think about the culture of its formation, unfortunately, only from a departmental point of view. Differently organized human environment inevitably affects behavior, emotional state of a man, his perception and understanding of space. The cultural heritage of society fits in the space of an artificial environment created by a man, and determines the behavior of people.For the solution of problems of formation of the urban environment, it is necessary to apply a set of interrelated technical, social, environmental, aesthetic and other measures. In this capacity, landscape design as a set of methods has to build a sustainable urban environment to ensure harmonious living.Current trends, methods, and techniques of landscape design are to create sustainable environment for a person - creative, spiritual, comfortable, attractive, safe, harmonious.

Effect of a superconducting coil as a fault current limiter on current density distribution in BSCCO tape after an over-current pulse

NASA Astrophysics Data System (ADS)

Tallouli, M.; Shyshkin, O.; Yamaguchi, S.

2017-07-01

The development of power transmission lines based on long-length high temperature superconducting (HTS) tapes is complicated and technically challenging task. A serious problem for transmission line operation could become HTS power cable damage due to over-current pulse conditions. To avoid the cable damage in any urgent case the superconducting coil technology, i.e. superconductor fault current limiter (SFCL) is required. Comprehensive understanding of the current density characteristics of HTS tapes in both cases, either after pure over-current pulse or after over-current pulse limited by SFCL, is needed to restart or to continue the operation of the power transmission line. Moreover, current density distribution along and across the HTS tape provides us with the sufficient information about the quality of the tape performance in different current feeding regimes. In present paper we examine BSCCO HTS tape under two current feeding regimes. The first one is 100A feeding preceded by 900A over-current pulse. In this case none of tape protection was used. The second scenario is similar to the fist one but SFCL is used to limit an over-current value. For both scenarios after the pulse is gone and the current feeding is set up at 100A we scan magnetic field above the tape by means of Hall probe sensor. Then the feeding is turned of and the magnetic field scanning is repeated. Using the inverse problem numerical solver we calculate the corresponding direct and permanent current density distributions during the feeding and after switch off. It is demonstrated that in the absence of SFCL the current distribution is highly peaked at the tape center. At the same time the current distribution in the experiment with SFCL is similar to that observed under normal current feeding condition. The current peaking in the first case is explained by the effect of an opposite electric field induced at the tape edges during the overcurrent pulse decay, and by degradation of superconductivity at the edges due to penetration of magnetic field in superconducting core during the pulse.

A Roadmap of Innovative Nuclear Energy System

NASA Astrophysics Data System (ADS)

Sekimoto, Hiroshi

2017-01-01

Nuclear is a dense energy without CO2 emission. It can be used for more than 100,000 years using fast breeder reactors with uranium from the sea. However, it raises difficult problems associated with severe accidents, spent fuel waste and nuclear threats, which should be solved with acceptable costs. Some innovative reactors have attracted interest, and many designs have been proposed for small reactors. These reactors are considered much safer than conventional large reactors and have fewer technical obstructions. Breed-and-burn reactors have high potential to solve all inherent problems for peaceful use of nuclear energy. However, they have some technical problems with materials. A roadmap for innovative reactors is presented herein.

Strategy-Based Technical Instruction: Development and Evaluation

DTIC Science & Technology

1988-08-01

scripts dependant on target tasks and the outcomes desired, and to the use of node-link knowledge maps as communications props. In addition, we have...information "on the job" - communicate with others in the task environment; - monitor, diagnose, and correct problems associated with critical tasks... communicated . Technical Training Goals The individual in a technical training scenario is expected to achieve a wide variety of goals. These goals can

Thoracoplasty-Current View on Indication and Technique.

PubMed

Kuhtin, Oleg; Veith, Marina; Alghanem, Mohammed; Martel, Ivan; Giller, Dmitrii; Haas, Viktor; Lampl, Ludwig

2018-05-17

Thoracoplasty was invented for removing cavities between thoracic wall and remnant lung or mediastinum. It was initially used in cases of tuberculosis or unspecific infections, while currently it is used mainly for space problems after lobectomy/pneumonectomy.This article presents an overview of the historical and current techniques of this surgical procedure.Nowadays, thoracoplasty is rarely performed due to the low incidence of diseases for which this method is necessary. Therefore, this method has even been discredited. Furthermore, certain technical aspects of the thoracoplasty are not very well known because of the infrequent application of this procedure.Unfortunately, a look into the literature of thoracoplasty is not always usefull due to the biased views of advocates of different techniques such as Schede's thoracoplasty, Heller's Jalousie-Plastik, Alexander's extramusculoperiosteal thoracoplasty, Bjork's osteoplastic thoracoplasty, etc.Not to forget, there has always been a lack of research on the relevance and on the several techniques of thoracoplasty.The point is precise indication and correct execution of thoracoplasty as a final therapeutic option, which allows a safe and definitive solution of the space problem even in complex cases, without creating serious functional and cosmetic impairment for the patient.The main types of thoracoplasty are described in this article. Although the core principle of this operation remains unchanged, modern techniques are often cosmetically more considerable and less destructive, compared with techniques that were used in the past. Georg Thieme Verlag KG Stuttgart · New York.

Mauna Loa Revealed: Structure, Composition, History, and Hazards

NASA Astrophysics Data System (ADS)

Rhodes, J. M.; Lockwood, John P.

Mauna Loa is a volcano of superlatives: it is the largest active volcano on Earth and among the most productive. This volume serves to place on record the current state of our knowledge concerning Mauna Loa at the beginning of the Decade Volcano Project. The scope is broad, encompassing the geologic and exploratory history of the volcano, an overview of its submarine geology, its structure, petrologic and geochemical characteristics, and what Mauna Loa has to tell us about the Hawaiian mantle plume; it covers also remote sensing methods and the use of gravity, seismic and deformational studies for eruption monitoring and forecasting, hazards associated with the volcano, and even the importance of a changing volcanic landscape with a wide spectrum of climate zones as an ecological laboratory. We have made a deliberate effort to present a comprehensive spectrum of current Mauna Loa research by building on a December 1993 symposium at the AGU Fall Meeting that considered (1) what is currently known about Mauna Loa, (2) critical problems that need to be addressed, and (3) the technical means to solve these problems, and by soliciting contributions that were not part of the symposium. We encouraged authors to consider how their papers relate to others in the volume through crossreferencing. The intent was that this monograph should be a book about Mauna Loa rather than a collection of disparate papers.

An overview of ecological monitoring based on geographic information system (GIS) and remote sensing (RS) technology in China

NASA Astrophysics Data System (ADS)

Zhang, Jing; Zhang, Jia; Du, Xiangyang; Kang, Hou; Qiao, Minjuan

2017-11-01

Due to the rapid development of human economy and society, the resulting ecological problems are becoming more and more prominent, and the dynamic monitoring of the various elements in the ecosystem has become the focus of the current research. For the complex structure and function of the ecological environment monitoring, advanced technical means should be adopted. With the development of spatial information technology, the ecological monitoring technology based on GIS and RS is becoming more and more perfect, and spatial analysis will play an important role in the field of environmental protection. Based on the GIS and RS technology, this paper analyzes the general centralized ecological monitoring model, and makes an objective analysis of the current ecological monitoring trend of China. These are important for the protection and management of ecological environment in China.

Current Status of Obstetric Anaesthesia: Improving Satisfaction and Safety

PubMed Central

Ranasinghe, J Sudharma; Birnbach, David

2009-01-01

Summary The Centers for Disease Control and Prevention (CDC) reported in 2003 that although the maternal mortality rate has decreased by 99% since 1900, there has been no further decrease in the last two decades1. A more recent report indicates a rate of 11.8 per 100,000 live births2, although anaesthesia-related maternal mortality and morbidity has considerably decreased over the last few decades. Despite the growing complexity of problems and increasing challenges such as pre-existing maternal disease, obesity, and the increasing age of pregnant mothers, anaesthesia related maternal mortality is extremely rare in the developed world. The current safety has been achieved through changes in training, service, technical advances and multidisciplinary approach to care. The rates of general anaesthesia for cesarean delivery have decreased and neuraxial anaesthetics have become the most commonly used techniques. Neuraxial techniques are largely safe and effective, but potential complications, though rare, can be severe. PMID:20640111

Space and biotechnology: An industry profile

NASA Technical Reports Server (NTRS)

Johnston, Richard S.; Norton, David J.; Tom, Baldwin H.

1988-01-01

The results of a study conducted by the Center for Space and Advanced Technology (CSAT) for NASA-JSC are presented. The objectives were to determine the interests and attitudes of the U.S. biotechnology industry toward space biotechnology and to prepare a concise review of the current activities of the biotechnology industry. In order to accomplish these objectives, two primary actions were taken. First, a questionnaire was designed, reviewed, and distributed to U.S. biotechnology companies. Second, reviews of the various biotechnology fields were prepared in several aspects of the industry. For each review, leading figures in the field were asked to prepare a brief review pointing out key trends and current industry technical problems. The result is a readable narrative of the biotechnology industry which will provide space scientists and engineers valuable clues as to where the space environment can be explored to advance the U.S. biotechnology industry.

Renewable energy sources in Bulgaria: Current state and trends

NASA Astrophysics Data System (ADS)

Kolev, K.

The over-dependency of Bulgaria on imported fuel stressed the importance of developing a new energy strategy based on energy saving which includes also using renewable energy sources (RES). The target is the substitution of at least 2 percent of the real primary energy consumption with RES by 2010. The author gives a generalized analysis of the available RES in Bulgaria -solar, wind, geothermal, biomass and mini-hydraulic. The potentialities of each source for its usage as a suitable energy supply are pointed out, as well as the current status of research and implementation work, problems connected with legislation, financing and production of particular facilities. The governmental policy concerning RES is considered briefly. A description is given to the project 'Technical and Economical Assessment of Possibilities for Expansion of the RES-part in the Energy Balance of the Country' developed and started in 1994 in the framework of the PHARE program.

EIT forward problem parallel simulation environment with anisotropic tissue and realistic electrode models.

PubMed

De Marco, Tommaso; Ries, Florian; Guermandi, Marco; Guerrieri, Roberto

2012-05-01

Electrical impedance tomography (EIT) is an imaging technology based on impedance measurements. To retrieve meaningful insights from these measurements, EIT relies on detailed knowledge of the underlying electrical properties of the body. This is obtained from numerical models of current flows therein. The nonhomogeneous and anisotropic electric properties of human tissues make accurate modeling and simulation very challenging, leading to a tradeoff between physical accuracy and technical feasibility, which at present severely limits the capabilities of EIT. This work presents a complete algorithmic flow for an accurate EIT modeling environment featuring high anatomical fidelity with a spatial resolution equal to that provided by an MRI and a novel realistic complete electrode model implementation. At the same time, we demonstrate that current graphics processing unit (GPU)-based platforms provide enough computational power that a domain discretized with five million voxels can be numerically modeled in about 30 s.

[NASA/DOD Aerospace Knowledge Diffusion Research Project. Paper 1:] The value of Scientific and Technical Information (STI), its relationship to Research and Development (R&D), and its use by US aerospace engineers and scientists

NASA Technical Reports Server (NTRS)

Pinelli, Thomas E.; Glassman, Myron; Barclay, Rebecca O.; Oliu, Walter E.

1990-01-01

The relationship between scientific and technical information (STI), its use by aerospace engineers and scientists, and the aerospace R&D process is examined. Data are presented from studies of the role of STI in the performance and management of R&D activities and the behavior of engineers when using and seeking information. Consideration is given to the information sources used to solve technical problems, the production and use of technical communications, and the use of libraries, technical information centers, and on-line data bases.

A technical report on structural evaluation of the Meade County reinforced concrete bridge.

DOT National Transportation Integrated Search

2009-01-01

This is a technical report on the first phase of the evaluation of the Meade County reinforced concrete bridge. : The first three chapters introduce the main problem and provide a general review of the existing evaluation : methods and the procedures...

A Case Study on the Status of Technical and Vocational Education in Thailand. Case Studies on Technical and Vocational Education in Asia and the Pacific.

ERIC Educational Resources Information Center

Shoolap, Charoon; Choomnoom, Siripan

This two-part report presents an overview of the vocational and technical education system in Thailand. The first part is a review of the current and likely future situations pertaining to vocational and technical education in that country. An analysis of economic conditions, human resource development, and the existing technical and vocational…

The Technical Assistance Program: A Program Plan.

DTIC Science & Technology

1985-09-01

interests, talents, and hobbies of current employees who wish to become involved in the technical assistance program . 4. Capitalize on the corporate...Center San Diego, CA 92152 Telephone (619) 225-6281 B-33 TAP ( EMPLOYEE ) QUESTIONNAIRE - The Technical Assistance Program (TAP) links technically skilled...Brochure, "Retired Technologist" C-11 C. Sample Letter to NOSC Employees C-13 Brochure D. The Technical Assistance Program C-15 C-1

Technical aspects of CT imaging of the spine.

PubMed

Tins, Bernhard

2010-11-01

This review article discusses technical aspects of computed tomography (CT) imaging of the spine. Patient positioning, and its influence on image quality and movement artefact, is discussed. Particular emphasis is placed on the choice of scan parameters and their relation to image quality and radiation burden to the patient. Strategies to reduce radiation burden and artefact from metal implants are outlined. Data acquisition, processing, image display and steps to reduce artefact are reviewed. CT imaging of the spine is put into context with other imaging modalities for specific clinical indications or problems. This review aims to review underlying principles for image acquisition and to provide a rough guide for clinical problems without being prescriptive. Individual practice will always vary and reflect differences in local experience, technical provisions and clinical requirements.

Analysis for water conflicts in a changing world

NASA Astrophysics Data System (ADS)

Lund, J. R.

2012-12-01

Like any subject which involves billions of dollars and thousands or millions of people, managing water involves serious conflicts among contending objectives and interest groups. These conflicts usually spill into the technical and scientific analysis of water resources problems and potential solutions. A favorable or unfavorable analytical outcome can be worth millions or cost millions to a stakeholder, so they have a self-interested duty to contend. This talk examines ideas for conducting analysis to improve the technical and scientific quality of public and policy discussions of controversial water problems. More than just solid technical work is needed. Investigators must organize, disseminate, and communicate their work effectively and attentively. Research must often be designed to be effective in informing policy discussions. Several sometimes conflicting strategies are available for this.

[A strategy of constructing the technological system for quality control of Chinese medicine based on process control and management].

PubMed

Cheng, Yi-Yu; Qian, Zhong-Zhi; Zhang, Bo-Li

2017-01-01

The current situation, bottleneck problems and severe challenges in quality control technology of Chinese Medicine (CM) are briefly described. It is presented to change the phenomenon related to the post-test as the main means and contempt for process control in drug regulation, reverse the situation of neglecting the development of process control and management technology for pharmaceutical manufacture and reconstruct the technological system for quality control of CM products. The regulation and technology system based on process control and management for controlling CM quality should be established to solve weighty realistic problems of CM industry from the root causes, including backwardness of quality control technology, weakness of quality risk control measures, poor reputation of product quality and so on. By this way, the obstacles from poor controllability of CM product quality could be broken. Concentrating on those difficult problems and weak links in the technical field of CM quality control, it is proposed to build CMC (Chemistry, Manufacturing and Controls) regulation for CM products with Chinese characteristics and promote the regulation international recognition as soon as possible. The CMC technical framework, which is clinical efficacy-oriented, manufacturing manner-centered and process control-focused, was designed. To address the clinical characteristics of traditional Chinese medicine (TCM) and the production feature of CM manufacture, it is suggested to establish quality control engineering for CM manufacturing by integrating pharmaceutical analysis, TCM chemistry, TCM pharmacology, pharmaceutical engineering, control engineering, management engineering and other disciplines. Further, a theoretical model of quality control engineering for CM manufacturing and the methodology of digital pharmaceutical engineering are proposed. A technology pathway for promoting CM standard and realizing the strategic goal of CM internationalization is elaborated. Copyright© by the Chinese Pharmaceutical Association.

Engineering and Technical Education in Russia, in Numbers

ERIC Educational Resources Information Center

Aref'ev, A. L.; Aref'ev, M. A.

2013-01-01

An analysis of the main tendencies in the development of engineering and technical education in Russia during the last 100 years shows that earlier strengths have been lost, and that currently technical education in Russia is far behind modern world standards.

Mode Selection Techniques in Variable Mass Flexible Body Modeling

NASA Technical Reports Server (NTRS)

Quiocho, Leslie J.; Ghosh, Tushar K.; Frenkel, David; Huynh, An

2010-01-01

In developing a flexible body spacecraft simulation for the Launch Abort System of the Orion vehicle, when a rapid mass depletion takes place, the dynamics problem with time varying eigenmodes had to be addressed. Three different techniques were implemented, with different trade-offs made between performance and fidelity. A number of technical issues had to be solved in the process. This paper covers the background of the variable mass flexibility problem, the three approaches to simulating it, and the technical issues that were solved in formulating and implementing them.

The American Experience in the Transition from Vocational Schools to Work: A Report to the United Nations Education, Scientific, and Cultural Organization. International Symposium on Problems of Transition from Technical and Vocational Schools to Work (Berlin, German Democratic Republic, 14-18 April, 1980).

ERIC Educational Resources Information Center

Dunham, Daniel B.

This paper discusses the central problems and issues of the transition from school to worklife in the United States. Developed from a framework which outlines the structure of the education system and the place of vocational-technical education within it, the paper addresses measures the United States has taken to facilitate the transition from…

New technology implementation: Technical, economic and political factors

NASA Technical Reports Server (NTRS)

Dean, J. W., Jr.; Susman, G. I.; Porter, P. S.

1985-01-01

An analysis is presented of the process of implementing advanced manufacturing technology, based on studies of numerous organizations. This process is seen as consisting of a series of decisions with technical, economic, and political objectives. Frequency decisions involve specifications, equipment, resources/organization, and location. Problems in implementation are viewed as resulting from tradeoffs among the objectives, the tendency of decision makers to emphasize some objectives at the expense of others, and the propensity of problems to spread from one area to another. Three sets of recommendations, based on this analysis, are presented.

Full-arch milled titanium implant bridge: technical report.

PubMed

Peché, Wendy-Ann; Van Vuuren, Ludwig Jansen; Park, Chae

2011-09-01

The manufacturing of full-arch fixed implant-supported bridges with the use of the traditional lost wax technique remains a technical challenge. Distortion of the alloy during casting and subsequent heating cycles during porcelain build-up causes numerous problems. Fracturing of porcelain on large restorations is difficult and costly to restore. The fitting problems can be eliminated by utilising CAD/CAM technology in the manufacturing of long-span or full-arch titanium bridges. Repair of damaged porcelain can be simplified with the use of discrete, individually-removable crowns on the bridge.

Problems in Recording the Electrocardiogram.

ERIC Educational Resources Information Center

Webster, John G.

The unwanted signals that arise in electrocardiography are discussed. A technical background of electrocardiography is given, along with teaching techniques that educate students of medical instrumentation to solve the problems caused by these signals. (MJH)

Counter-Terrorism Contributions from the National Labs

NASA Astrophysics Data System (ADS)

Davis, Jay

2002-04-01

The DOD and NNSA laboratories have significant technical capabilities that can contribute to counter-terrorism and homeland security. Maximizing those contributions, however, requires that laboratory staff engage the doctrinal and operational issues of these problems as well. The broader interagency community needs support in these components of the problem as much as in the technical components. The speaker's experiences as director of the DoD Defense Threat Reduction Agency, established in 1998 to address DoD's role in defense against weapons of mass destruction in all venues, have given him a somewhat unique perspective on this problem. Examples of issues identified in scenario play at Cabinet level in the last Admistration will be given to illustrate the breadth of this problem, as will the speaker's assessment of the grand challenges in deterring use of WMD against the Homeland.

Fundamental Problems of Lunar Research, Technical Solutions, and Priority Lunar Regions for Research

NASA Astrophysics Data System (ADS)

Ivanov, M. A.; Basilevsky, A. T.; Bricheva, S. S.; Guseva, E. N.; Demidov, N. E.; Zakharova, M.; Krasil'nikov, S. S.

2017-11-01

In this article, we discuss four fundamental scientific problems of lunar research: (1) lunar chronology, (2) the internal structure of the Moon, (3) the lunar polar regions, and (4) lunar volcanism. After formulating the scientific problems and their components, we proceed to outlining a list of technical solutions and priority lunar regions for research. Solving the listed problems requires investigations on the lunar surface using lunar rovers, which can deliver a set of analytical equipment to places where geological conditions are known from a detailed analysis of orbital information. The most critical research methods, which can answer some of the key questions, are analysis of local geological conditions from panoramic photographs, determination of the chemical, isotopic, and mineral composition of the soil, and deep seismic sounding. A preliminary list is given of lunar regions with high scientific priority.

Problem Solving in the PISA and TIMSS 2003 Assessments. Technical Report. NCES 2007-049

ERIC Educational Resources Information Center

Dossey, John A.; McCrone, Sharon S.; O'Sullivan, Christine

2006-01-01

In 2003, the Program for International Student Assessment (PISA) and Trends in International Mathematics and Science Study (TIMSS) included a special focus on problem-solving. This report reviews the problem-solving aspects of each study in order to compare and contrast the nature of problem solving in each assessment. The report's authors develop…

Alcohol Problems Prevention/Intervention Programs: Guidelines for College Campuses. Revised.

ERIC Educational Resources Information Center

Harding, Frances M.; Connor, Leslie S.

This manual is designed to respond to the growing interest among colleges in technical assistance for dealing with alcohol-related problems. Part One provides an overview of the dimensions of alcohol related problems and delves into the causes and prevention of alcohol problems. It outlines the Public Health Model approach to dealing with alcohol…

Good practices in managing work-related indoor air problems: a psychosocial perspective.

PubMed

Lahtinen, Marjaana; Huuhtanen, Pekka; Vähämäki, Kari; Kähkönen, Erkki; Mussalo-Rauhamaa, Helena; Reijula, Kari

2004-07-01

Indoor air problems at workplaces are often exceedingly complex. Technical questions are interrelated with the dynamics of the work community, and the cooperation and interaction skills of the parties involved in the problem solving process are also put to the test. The objective of our study was to analyze the process of managing and solving indoor air problems from a psychosocial perspective. This collective case study was based on data from questionnaires, interviews and various documentary materials. Technical inspections of the buildings and indoor air measurements were also carried out. The following four factors best differentiated successful cases from impeded cases: extensive multiprofessional collaboration and participative action, systematic action and perseverance, investment in information and communication, and process thinking and learning. The study also proposed a theoretical model for the role of the psychosocial work environment in indoor air problems. The expertise related to social and human aspects of problem solving plays a significant role in solving indoor air problems. Failures to properly handle these aspects may lead to resources being wasted and result in a problematic situation becoming stagnant or worse. Copyright 2004 Wiley-Liss, Inc.

Ontario Waste Exchange: Helping companies recycle their nonhazardous waste and reap the profits

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hanley, M.J.

1997-12-31

The Ontario Waste Exchange (OWE), operated by ORTECH Corporation, is a technical assistance program committed to helping industries find practical alternatives to disposal. OWE is an active exchange, a Technical Matchmaker, matching waste generators with potential end users or recyclers. The OWE utilizes its extensive Reuse and Recycling Markets database that lists current markets in Ontario and neighboring provinces and states. The OWE maintains the database and electronically disseminates the information to industries in an effective and efficient manner. The OWE encourages industries to recycle their nonhazardous waste if a market is available and the economics are viable. The OWE`smore » true value is in helping to create new markets for currently unwanted wastes. The OWE helps to identify potential business opportunities where problem wastes could be recycled into useful products. The OWE also helps existing recyclers expand their operations by sourcing enough consistent supply of a required material. The OWE is recognized internationally as one of the most successful waste exchanges in the world and a significant contributor to achieving the goal of 50% diversion of nonhazardous waste from disposal by year 2,000. CNN and CBC networks showcased OWE`s unique services, highlighting the recycling businesses that have been helped. The OWE has assisted over a 100,000 companies, exchanged over 3,000 materials and diverted over one million cumulative tons of material from disposal since 1984.« less

DS-2 Mars Microprobe Battery

NASA Technical Reports Server (NTRS)

Frank, H.; Kindler, A.; Deligiannis, F.; Davies, E.; Blankevoort, J.; Ratnakumar, B. V.; Surampudi, S.

1999-01-01

In January of 1999 the NM DS-2 Mars microprobe will be launched to impact on Mars in December. The technical objectives of the missions are to demonstrate: key technologies, a passive atmospheric entry, highly integrated microelectronics which can withstand both low temperatures and high decelerations, and the capability to conduct in-situ, surface and subsurface science data acquisition. The scientific objectives are to determine if ice is present below the Martian surface, measure the local atmospheric pressure, characterize the thermal properties of the martian subsurface soil, and to estimate the vertical temperature gradient of the Martian soil. The battery requirements are 2-4 cell batteries, with voltage of 6-14 volts, capacity of 550 mAh at 80C, and 2Ah at 25C, shelf life of 2.5 years, an operating temperature of 60C and below, and the ability to withstand shock impact of 80,000 g's. The technical challenges and the approach is reviewed. The Li-SOCL2 system is reviewed, and graphs showing the current and voltage is displayed, along with the voltage over discharge time. The problems encountered during the testing were: (1) impact sensitivity, (2) cracking of the seals, and (3) delay in voltage. A new design resulted in no problems in the impact testing phase. The corrective actions for the seal problems involved: (1) pre weld fill tube, (2) an improved heat sink during case to cover weld and (3) change the seal dimensions to reduce stress. To correct the voltage delay problem the solutions involved: (1) drying the electrodes to reduce contamination by water, (2) assemblage of the cells within a week of electrode manufacture, (3) ensure electrolyte purity, and (4) provide second depassivation pulse after landing. The conclusions on further testing were that the battery can: (1) withstand anticipated shock of up to 80,000 g, (2) meet the discharge profile post shock at Mars temperatures, (3) meet the required self discharge rate and (4) meet environmental requirements.

Does Problem-Based Learning Improve Problem Solving Skills?--A Study among Business Undergraduates at Malaysian Premier Technical University

ERIC Educational Resources Information Center

Kadir, Z. Abdul; Abdullah, N. H.; Anthony, E.; Salleh, B. Mohd; Kamarulzaman, R.

2016-01-01

Problem-based Learning (PBL) approach has been widely used in various disciplines since it is claimed to improve students' soft skills. However, empirical supports on the effect of PBL on problem solving skills have been lacking and anecdotal in nature. This study aimed to determine the effect of PBL approach on students' problem solving skills…

Annual Report of the National Advisory Committee for Aeronautics (1st). [Administrative Report Including Technical Reports Nos. 1 to 7

NASA Technical Reports Server (NTRS)

1916-01-01

Report includes the National Advisory Committee for Aeronautics letter of submittal to the President, Congressional report, summaries of the committee's activities and research accomplished, expenditures, problems, recommendations, and a compilation of technical reports produced.

48 CFR 2452.242-71 - Contract management system.

Code of Federal Regulations, 2011 CFR

2011-10-01

..., concise summary of technical progress made and the costs incurred for each task during the reporting... technical progress made for each task during the reporting period; and (B) Identifies problems, or potential... and progress reporting as described herein. (b) The contract management system shall consist of two...

Annual report of the National Advisory Committee for Aeronautics (4th).administrative report including Technical Reports nos. 24 to 50

NASA Technical Reports Server (NTRS)

1920-01-01

Report includes the National Advisory Committee for Aeronautics letter of submittal to the President, Congressional report, summaries of the committee's activities and research accomplished, expenditures, problems, recommendations, and a compilation of technical reports produced.

PISA 2012 Technical Report

ERIC Educational Resources Information Center

OECD Publishing, 2014

2014-01-01

The "PISA 2012 Technical Report" describes the methodology underlying the PISA 2012 survey, which tested 15-year-olds' competencies in mathematics, reading and science and, in some countries, problem solving and financial literacy. It examines the design and implementation of the project at a level of detail that allows researchers to…

Vocational and Technical Education.

ERIC Educational Resources Information Center

Compact, 1968

1968-01-01

Volume 2, Issue 3 of "Compact" was designed to point out the problems and potential of vocational-technical education and to offer some suggestions for action. Major content includes: (1) "Education for Twenty-First Century Employment," by Wayne Morse, (2) "Pending Federal Legislation Encourages Vocational Innovation," by Grant Venn, (3)…

Facilitating Service Learning in the Online Technical Communication Classroom

ERIC Educational Resources Information Center

Nielsen, Danielle

2016-01-01

Drawing from the author's experience teaching online technical communication courses with an embedded service-learning component, this essay opens the discussion to the potential problems involved in designing online service-learning courses and provides practical approaches to integrating service learning into online coursework. The essay…

South Carolina TEC Student Code.

ERIC Educational Resources Information Center

Edwards, C. A., Ed.; Kiser, J. A., Ed.

This student code has statewide application to South Carolina Technical Colleges and Technical Education Centers (TEC). Provisions are divided into eight articles: (1) General Provisions, including the purpose of a student code, the precept of internal solution of problems, and definitions; (2) Student Rights, including Bill of Rights protections;…

Special Education Finance in California. Technical Appendices

ERIC Educational Resources Information Center

Hill, Laura; Warren, Paul; Murphy, Patrick; Ugo, Iwunze; Pathak, Aditi

2016-01-01

This document presents the technical appendices that accompany the full report, "Special Education Finance in California." The appendices include: (1) Problems with AB 602 and Other State Funding Programs for Special Education; (2) Additional Figures for Analysis of Distribution of Students with Disabilities; (3) Using Supplemental and…

The Design and Transfer of Advanced Command and Control (C2) Computer-Based Systems

DTIC Science & Technology

1980-03-31

TECHNICAL REPORT 80-02 QUARTERLY TECHNICAL REPORT: THE DESIGN AND TRANSFER OF ADVANCED COMMAND AND CONTROL (C 2 ) COMPUTER-BASED SYSTEMS ARPA...The Tasks/Objectives and/or Purposes of the overall project are connected with the design , development, demonstration and transfer of advanced...command and control (C2 ) computer-based systems; this report covers work in the computer-based design and transfer areas only. The Technical Problems thus

Research on the fundamental principles of China's marine invasive species prevention legislation.

PubMed

Bai, Jiayu

2014-12-15

China's coastal area is severely damaged by marine invasive species. Traditional tort theory resolves issues relevant to property damage or personal injuries, through which plaintiffs cannot cope with the ecological damage caused by marine invasive species. Several defects exist within the current legal regimes, such as imperfect management systems, insufficient unified technical standards, and unsound legal responsibility systems. It is necessary to pass legislation to prevent the ecological damage caused by marine invasive species. This investigation probes the fundamental principles needed for the administration and legislation of an improved legal framework to combat the problem of invasive species within China's coastal waters. Copyright © 2014 Elsevier Ltd. All rights reserved.

Houston, We Have a Problem Solving Model for Training

NASA Technical Reports Server (NTRS)

Schmidt, Lacey; Slack, Kelley; Keeton, Kathryn; Barshi, Immanuel; Martin, Lynne; Mauro, Robert; O'Keefe, William; Baldwin, Evelyn; Huning, Therese

2011-01-01

In late 2006, the Mission Operations Directorate (MOD) at NASA began looking at ways to make training more efficient for the flight controllers who support the International Space Station. The average certification times for flight controllers spanned from 18 months to three years and the MOD, responsible for technical training, was eager to develop creative solutions that would reduce the time to 12 months. Additionally, previously trained flight controllers sometimes participated in more than 50 very costly, eight-hour integrated simulations before becoming certified. New trainees needed to gain proficiency with far fewer lessons and training simulations than their predecessors. This poster presentation reviews the approach and the process that is currently in development to accomplish this goal.

Transcriptome Analysis of PA Gain and Loss of Function Mutants.

PubMed

Marco, Francisco; Carrasco, Pedro

2018-01-01

Functional genomics has become a forefront methodology for plant science thanks to the widespread development of microarray technology. While technical difficulties associated with the process of obtaining raw expression data have been diminishing, allowing the appearance of tremendous amounts of transcriptome data in different databases, a common problem using "omic" technologies remains: the interpretation of these data and the inference of its biological meaning. In order to assist to this complex task, a wide variety of software tools have been developed. In this chapter we describe our current workflow of the application of some of these analyses. We have used it to compare the transcriptome of plants with differences in their polyamine levels.

Integration of an expert teaching assistant with distance learning software

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fonseca, S.P.; Reed, N.E.

1996-12-31

The Remote Teaching Assistant (RTA) software currently under development at UC Davis allows students and Teaching Assistants (TA`s) to interact through multimedia communication via the Internet. To resolve the problem of TA unavailability and limited knowledge, an Expert Teaching Assistant (ETA) module is being developed. When TA`s are not on-line, students in need of help consult ETA. The focus of this research is the development and integration of ETA with RTA, the establishment of an architecture suitable for use with education (the domain) in any sub-domain (course), and the creation of a mechanism usable by non-technical personnel to maintain knowledgemore » bases.« less

The social problems and strategies of the government GIS in China

NASA Astrophysics Data System (ADS)

Chen, Nan; Fu, Zhongliang

2007-06-01

GIS has wider and wider applications. The application in the field of administrative management and assistant decision-making have formed a specific research area--the government GIS. As an information industry with great sociality, GIS and its development are influenced by many technical factors and social factors. As for the government GIS in China, the social factors often play a more important role in it. A description of the current development status of the government GIS, both in China and abroad, was made in this paper. After the description, researchers pointed out the deficiency of Chinese government GIS. On the basis of this, the rational suggestion of government GIS in China were put forward at last.

[Mechanical strength and mechano-compatibility of tissue-engineered bones].

PubMed

Tanaka, Shigeo

2016-01-01

Current artificial bones made of metals and ceramics may be replaced around a decade after implantation due to its low durability, which is brought on by a large difference from the host bone in mechanical properties, i.e., low mechano-compatibility. On the other hand, tissue engineering could be a solution with regeneration of bone tissues from stem cells in vitro. However, there are still some problems to realize exactly the same mechanical properties as those of real bone. This paper introduces the technical background of bone tissue engineering and discusses possible methods for installation of mechano-compatibility into a regenerative bone. At the end, future directions toward the realization of ideal mechano-compatible regenerative bone are proposed.

Biomaterials in the Treatment of Anal Fistula: Hope or Hype?

PubMed Central

Scoglio, Daniele; Walker, Avery S.; Fichera, Alessandro

2014-01-01

Anal fistula (AF) presents a chronic problem for patients and colorectal surgeons alike. Surgical treatment may result in impairment of continence and long-term risk of recurrence. Treatment options for AFs vary according to their location and complexity. The ideal approach should result in low recurrence rates and minimal impact on continence. New technical approaches involving biologically derived products such as biological mesh, fibrin glue, fistula plug, and stem cells have been applied in the treatment of AF to improve outcomes and decrease recurrence rates and the risk of fecal incontinence. In this review, we will highlight the current evidence and describe our personal experience with these novel approaches. PMID:25435826

Advanced study of global oceanographic requirements for EOS A/B: Technical volume

NASA Technical Reports Server (NTRS)

1972-01-01

Characteristics of the ocean are considered in terms of U.S. social, scientific and ecomomic priorities and in terms of the measurements that can best be made from a spacecraft. The kinds of information needed to advance the basic ocean sciences, to improve marine transportation and fisheries operations, and to provide information for pollution control are discussed. These information needs were related to sensor concepts and an optimum sensor complement is presented, together with orbital considerations. The data-gathering capabilities of an oceanographic spacecraft were considered in relation to those of terrestrial oceanographic programs, using airborne, surface, and submarine platforms. Data management problems are discussed and are considered to be solvable with current technology.

Teaching ethics to engineers: ethical decision making parallels the engineering design process.

PubMed

Bero, Bridget; Kuhlman, Alana

2011-09-01

In order to fulfill ABET requirements, Northern Arizona University's Civil and Environmental engineering programs incorporate professional ethics in several of its engineering courses. This paper discusses an ethics module in a 3rd year engineering design course that focuses on the design process and technical writing. Engineering students early in their student careers generally possess good black/white critical thinking skills on technical issues. Engineering design is the first time students are exposed to "grey" or multiple possible solution technical problems. To identify and solve these problems, the engineering design process is used. Ethical problems are also "grey" problems and present similar challenges to students. Students need a practical tool for solving these ethical problems. The step-wise engineering design process was used as a model to demonstrate a similar process for ethical situations. The ethical decision making process of Martin and Schinzinger was adapted for parallelism to the design process and presented to students as a step-wise technique for identification of the pertinent ethical issues, relevant moral theories, possible outcomes and a final decision. Students had greatest difficulty identifying the broader, global issues presented in an ethical situation, but by the end of the module, were better able to not only identify the broader issues, but also to more comprehensively assess specific issues, generate solutions and a desired response to the issue.

Automated dredging and disposal alternatives management system (ADDAMS). Environmental effects of dredging. Technical note

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

This technical note describes the current capabilities and availability of the Automated Dredging and Disposal Alternatives Management System (ADDAMS). The technical note replaces the earlier Technical Note EEDP-06-12, which should be discarded. Planning, design, and management of dredging and dredged material disposal projects often require complex or tedious calculations or involve complex decision-making criteria. In addition, the evaluations often must be done for several disposal alternatives or disposal sites. ADDAMS is a personal computer (PC)-based system developed to assist in making such evaluations in a timely manner. ADDAMS contains a collection of computer programs (applications) designed to assist in managingmore » dredging projects. This technical note describes the system, currently available applications, mechanisms for acquiring and running the system, and provisions for revision and expansion.« less

78 FR 4030 - Designation of Low-Income Status; Acceptance of Secondary Capital Accounts by Low-Income...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-18

... writing that it wishes to accept the designation. The final rule extends an FCU's response time from 30..., nonsubstantive technical amendments to NCUA's requirements for insurance regulation to reflect current agency... requirements for insurance regulation. These technical corrections are necessary to reflect current agency...

A Critical Review of the Technical Characteristics of Current Preschool Screening Batteries

ERIC Educational Resources Information Center

Emmons, Michael R.; Alfonso, Vincent C.

2005-01-01

The current review provides a summary and evaluation of the technical characteristics of five preschool screening batteries, including the Brigance Screens, DIAL-3, ESI-R, ESP, and FirstSTEP. These norm-referenced instruments were selected on the basis of their commercial availability, description as a screening instrument, and ability to assess…

Quality Control in Title I Evaluation: Problems and Approaches.

ERIC Educational Resources Information Center

Hansen, Joe B.

Educational program evalaution is subject to many difficulties. Problems with evaluation include such conceptual problems as: (1) understanding of decisions to be made; (2) adequate definition; (3) consensus on values and criteria; (4) coordination among administrative levels; and (5) use of an appropriate evaluation model. Technical problems…

Computer Assisted Problem Solving in an Introductory Statistics Course. Technical Report No. 56.

ERIC Educational Resources Information Center

Anderson, Thomas H.; And Others

The computer assisted problem solving system (CAPS) described in this booklet administered "homework" problem sets designed to develop students' computational, estimation, and procedural skills. These skills were related to important concepts in an introductory statistics course. CAPS generated unique data, judged student performance,…

The Association between Mathematical Word Problems and Reading Comprehension

ERIC Educational Resources Information Center

Vilenius-Tuohimaa, Piia Maria; Aunola, Kaisa; Nurmi, Jari-Erik

2008-01-01

This study aimed to investigate the interplay between mathematical word problem skills and reading comprehension. The participants were 225 children aged 9-10 (Grade 4). The children's text comprehension and mathematical word problem-solving performance was tested. Technical reading skills were investigated in order to categorise participants as…

New Testing Methods to Assess Technical Problem-Solving Ability.

ERIC Educational Resources Information Center

Hambleton, Ronald K.; And Others

Tests to assess problem-solving ability being provided for the Air Force are described, and some details on the development and validation of these computer-administered diagnostic achievement tests are discussed. Three measurement approaches were employed: (1) sequential problem solving; (2) context-free assessment of fundamental skills and…

Support Services for Remote Users of Online Public Access Catalogs.

ERIC Educational Resources Information Center

Kalin, Sally W.

1991-01-01

Discusses the needs of remote users of online public access catalogs (OPACs). User expectations are discussed; problems encountered by remote-access users are examined, including technical problems and searching problems; support services are described, including instruction, print guides, and online help; and differences from the needs of…

Technical efficiency of public district hospitals in Madhya Pradesh, India: a data envelopment analysis.

PubMed

Jat, Tej Ram; Sebastian, Miguel San

2013-09-24

Scarcity of resources for healthcare is a well-acknowledged problem. In this context, efficient utilization of existing financial and human resources becomes crucial for strengthening the healthcare delivery. The assessment of efficiency of health facilities can guide decision makers in ensuring the optimum utilization of available resources. The objective of this study was to evaluate the technical efficiency (TE) of the public district hospitals in Madhya Pradesh, India, with special emphasis on maternal healthcare services, using data envelopment analysis (DEA). Data from 40 district hospitals from January to December 2010 were collected from the health management information system and other records of the department of health and family welfare of the state. DEA was performed with input orientation and variable returns to scale assumption. TE and scale efficiency scores of the district hospitals were 0.90 (SD = 0.14) and 0.88 (SD = 0.15), respectively. Of the total district hospitals in the study, 20 (50%) were technically efficient constituting the 'best practice frontier'. The other half were technically inefficient, with an average TE score of 0.79 (SD = 0.12) meaning that these hospitals could produce the same outputs by using 21% less inputs from current input levels. Twenty-six (65%) district hospitals were found to be scale inefficient, manifesting a mean score of 0.81 (SD = 0.16). Half of the district hospitals in the study were operating inefficiently. Decision makers and administrators in the state should identify the causes of the observed inefficiencies and take appropriate measures to increase efficiency of these hospitals.

Environmental Sciences Division annual progress report for period ending September 30, 1990

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1991-04-01

The Environmental Sciences Division (ESD) of Oak Ridge National Laboratory (ORNL) conducts research on the environmental aspects of existing and emerging energy systems and applies this information to ensure that technology development and energy use are consistent with national environmental health and safety goals. Offering an interdisciplinary resource of staff and facilities to address complex environmental problems, the division is currently providing technical leadership for major environmental issues of national concern: (1) acidic deposition and related environmental effects, (2) effects of increasing concentrations of atmospheric CO{sub 2} and the resulting climatic changes to ecosystems and natural and physical resources, (3)more » hazardous chemical and radioactive waste disposal and remediation research and development, and (4) development of commercial biomass energy production systems. This progress report outlines ESD's accomplishments in these and other areas in FY 1990. Individual reports are processed separately for the data bases in the following areas: ecosystem studies; environmental analyses; environmental toxicology; geosciences; technical and administrative support; biofuels feedstock development program; carbon dioxide information analysis and research program; and environmental waste program.« less

[Some ethical aspects of donation and transplantation].

PubMed

Martínez, K

2006-01-01

Ethical and legal consensus in our country bases the practice of donations and transplants on different ethical principles, which are contained in the legislation, closely conforming to the four principles of principialist bioethics: autonomy, beneficence, non-maleficence, and justice. The level of donations achieved in our milieu might, in fact, be related to a strict respect for these principles by the health professionals, as well as to the excellent organisation of the transplant world. Many scientific, technical and ethical challenges have had to be met to reach the present state of the transplant. And there are many current challenges. The article only analyses some of these due to their technical, ethical and social repercussions: organ transplants involving a live donor, the public request for organs, the organ market, the transplant of non-vital organs (basically the face transplant), the use of stem cells and the banks of umbilical cord cells. The aim of the article is to state the ethical problems raised by these new practices, in order to lay the foundations for a moral deliberation that must necessarily involve the whole of society.

An improved finite element modeling of the cerebrospinal fluid layer in the head impact analysis.

PubMed

Wu, John Z; Pan, Christopher S; Wimer, Bryan M; Rosen, Charles L

2017-01-01

The finite element (FE) method has been widely used to investigate the mechanism of traumatic brain injuries (TBIs), because it is technically difficult to quantify the responses of the brain tissues to the impact in experiments. One of technical challenges to build a FE model of a human head is the modeling of the cerebrospinal fluid (CSF) of the brain. In the current study, we propose to use membrane elements to construct the CSF layer. Using the proposed approach, we demonstrate that a head model can be built by using existing meshes available in commercial databases, without using any advanced meshing software tool, and with the sole use of native functions of the FE package Abaqus. The calculated time histories of the intracranial pressures at frontal, posterior fossa, parietal, and occipital positions agree well with the experimental data and the simulations in the literature, indicating that the physical effects of the CSF layer have been accounted for in the proposed modeling approach. The proposed modeling approach would be useful for bioengineers to solve practical problems.

Systems identification and the adaptive management of waterfowl in the United States

USGS Publications Warehouse

Williams, B.K.; Nichols, J.D.

2001-01-01

Waterfowl management in the United States is one of the more visible conservation success stories in the United States. It is authorized and supported by appropriate legislative authorities, based on large-scale monitoring programs, and widely accepted by the public. The process is one of only a limited number of large-scale examples of effective collaboration between research and management, integrating scientific information with management in a coherent framework for regulatory decision-making. However, harvest management continues to face some serious technical problems, many of which focus on sequential identification of the resource system in a context of optimal decision-making. The objective of this paper is to provide a theoretical foundation of adaptive harvest management, the approach currently in use in the United States for regulatory decision-making. We lay out the legal and institutional framework for adaptive harvest management and provide a formal description of regulatory decision-making in terms of adaptive optimization. We discuss some technical and institutional challenges in applying adaptive harvest management and focus specifically on methods of estimating resource states for linear resource systems.

Classroom Journal Club: Collaborative Study of Contemporary Primary Literature in the Biomechanics Classroom.

PubMed

Kuxhaus, Laurel; Corbiere, Nicole C

2016-07-01

Current engineering pedagogy primarily focuses on developing technical proficiency and problem solving skills; the peer-review process for sharing new research results is often overlooked. The use of a collaborative classroom journal club can engage students with the excitement of scientific discovery and the process of dissemination of research results, which are also important lifelong learning skills. In this work, a classroom journal club was implemented and a survey of student perceptions spanning three student cohorts was collected. In this collaborative learning activity, students regularly chose and discussed a recent biomechanics journal article, and were assessed based on specific, individual preparation tasks. Most student-chosen journal articles were relevant to topics discussed in the regular class lecture. Surveys assessed student perceptions of the activity. The survey responses show that, across all cohorts, students both enjoyed the classroom journal club and recognized it as an important learning experience. Many reported discussing their journal articles with others outside of the classroom, indicating good engagement. The results demonstrate that student engagement with primary literature can foster both technical knowledge and lifelong learning skills.

Formulation and communication of evaluative forensic science expert opinion-A GHEP-ISFG contribution to the establishment of standards.

PubMed

Amorim, António; Crespillo, Manuel; Luque, Juan A; Prieto, Lourdes; Garcia, Oscar; Gusmão, Leonor; Aler, Mercedes; Barrio, Pedro A; Saragoni, Victor G; Pinto, Nadia

2016-11-01

Communicating and interpreting genetic evidence in the administration of justice is currently a matter of great concern, due to the theoretical and technical complexity of the evaluative reporting and large difference in expertise between forensic experts and law professionals. A large number of initiatives have been taken trying to bridge this gap, contributing to the education of both parties. Results however have not been very encouraging, as most of these initiatives try to cope globally with the problem, addressing simultaneously theoretical and technical approaches which are in a quite heterogeneous state of development and validation. In consequence, the extension and complexity of the resulting documents disheartens their study by professionals (both jurists and geneticists) and makes a consensus very hard to reach even among the genetic experts' community. Here we propose a 'back-to-basics', example-driven approach, in which a model report for the two most common situations faced by forensic laboratories is presented. We do hope that this strategy will provide a solid basis for a stepwise generalisation. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Genome privacy: challenges, technical approaches to mitigate risk, and ethical considerations in the United States

PubMed Central

Wang, Shuang; Jiang, Xiaoqian; Singh, Siddharth; Marmor, Rebecca; Bonomi, Luca; Fox, Dov; Dow, Michelle; Ohno-Machado, Lucila

2016-01-01

Accessing and integrating human genomic data with phenotypes is important for biomedical research. Making genomic data accessible for research purposes, however, must be handled carefully to avoid leakage of sensitive individual information to unauthorized parties and improper use of data. In this article, we focus on data sharing within the scope of data accessibility for research. Current common practices to gain biomedical data access are strictly rule based, without a clear and quantitative measurement of the risk of privacy breaches. In addition, several types of studies require privacy-preserving linkage of genotype and phenotype information across different locations (e.g., genotypes stored in a sequencing facility and phenotypes stored in an electronic health record) to accelerate discoveries. The computer science community has developed a spectrum of techniques for data privacy and confidentiality protection, many of which have yet to be tested on real-world problems. In this article, we discuss clinical, technical, and ethical aspects of genome data privacy and confidentiality in the United States, as well as potential solutions for privacy-preserving genotype–phenotype linkage in biomedical research. PMID:27681358

Numerical Arc Segmentation Algorithm for a Radio Conference (NASARC), version 4.0: User's manual

NASA Technical Reports Server (NTRS)

Whyte, Wayne A., Jr.; Heyward, Ann O.; Ponchak, Denise S.; Spence, Rodney L.; Zuzek, John E.

1988-01-01

The information in the NASARC (Version 4.0) Technical Manual (NASA-TM-101453) and NASARC (Version 4.0) User's Manual (NASA-TM-101454) relates to the state of Numerical Arc Segmentation Algorithm for a Radio Conference (NASARC) software development through November 1, 1988. The Technical Manual describes the NASARC concept and the algorithms used to implement the concept. The User's Manual provides information on computer system considerations, installation instructions, description of input files, and program operation instructions. Significant revisions were incorporated in the Version 4.0 software over prior versions. These revisions have further enhanced the modeling capabilities of the NASARC procedure and provide improved arrangements of predetermined arcs within the geostationary orbit. Array dimensions within the software were structured to fit within the currently available 12-megabyte memory capacity of the International Frequency Registration Board (IFRB) computer facility. A piecewise approach to predetermined arc generation in NASARC (Version 4.) allows worldwide planning problem scenarios to be accommodated within computer run time and memory constraints with enhanced likelihood and ease of solution.

Naucno-tehnicka kultura i proizvodno-tehnicko stavaralastvo u Jugoslaviji (Scientific and Technical Culture and Productive Technical Creativity in Yugoslavia).

ERIC Educational Resources Information Center

Federation of Yugoslav Organizations for Technical Culture, Belgrade.

This document is an English-language abstract (approximately 1,500 words) of a book prepared by the Federation of Yugoslavia Organizations for Technical Culture ("Narodna Tehnika"). In this book, an attempt is made to (1) establish the current trends in the development of scientific and technical culture and productive technical…

Managerial Cost Accounting for a Technical Information Center.

ERIC Educational Resources Information Center

Helmkamp, John G.

A two-fold solution to the cost information deficiency problem is proposed. A formal managerial cost accounting system is designed expressly for the two information services of retrospective search and selective dissemination. The system was employed during a trial period to test its effectiveness in a technical information center. Once…

40 CFR 1039.625 - What requirements apply under the program for equipment-manufacturer flexibility?

Code of Federal Regulations, 2011 CFR

2011-07-01

... is manufactured. (4) An e-mail address and phone number to contact for further information, or a Web... secondary engine manufacturers. (l) [Reserved] (m) Additional exemptions for technical or engineering... avoided with reasonable discretion have resulted in technical or engineering problems that prevent you...

Technology-Dependent Children: Hospital v. Home Care: A Technical Memorandum.

ERIC Educational Resources Information Center

Congress of the U.S., Washington, DC. Office of Technology Assessment.

This technical memorandum examines the problems of health care financing encountered by technology-dependent children. A working definition of technology dependence is provided and the prevalence of technology dependence among American children is estimated. Analysis shows that the population of technology-dependent children has increased in size…

Outdoor Leadership Evaluation: Nature and Scope of the Problem.

ERIC Educational Resources Information Center

James, Leroy M.

Beyond the ability to exhibit good judgment and common sense while performing duties as a leader under stress and pressure, an outdoor adventure program leader should possess technical skills, human relations skills, and philosophical understanding of outdoor programming. Technical skills include knowledge of initiatives/ropes course activities,…

Post-Secondary Occupational Education and the Energy Crisis.

ERIC Educational Resources Information Center

Riendeau, Albert J.

Many implications exist for postsecondary educational institutions in the challenge of arriving at a responsible solution to the energy problem. The intent of the Energy Materials Conservation Education Act of 1975 is to call for a commitment by educators (community colleges, technical institutes, and trade and technical schools) to: (1) help…

Annual Report, 1979-1980. New York City Technical College.

ERIC Educational Resources Information Center

New York City Technical Coll., Brooklyn. Div. of Continuing Education and Extension Services.

Funding, enrollments, and outcomes are reported for the programs offered during 1979-1980 by New York City Technical College's Division of Continuing Education and Extension Services. The report's introduction analyzes enrollment in the division, summarizes external evaluation of selected programs, and examines problems of staffing, space, and the…

Build It and They Will Come: Addressing the Problem of Declining Entry-Level Skills.

ERIC Educational Resources Information Center

Koontz, Paul

2000-01-01

The growing gap between the skills of the work force and the technical requirements of today's jobs have reemphasized the need to transform the educational system to provide the solid academic and technical skills required by the jobs of today and tomorrow. (Author)

CIVIL ENGINEERING TECHNOLOGY CONSULTANTS' WORKSHOP, REPORT OF PROCEEDINGS (ATLANTA, MAY 17-20, 1967).

ERIC Educational Resources Information Center

DOBROVOLNY, JERRY S.

THIS REPORT ATTEMPTS TO SHOW ADMINISTRATORS OF JUNIOR COLLEGES, TECHNICAL INSTITUTES, AND GOVERNMENT OR INDUSTRIAL TRAINING PROGRAMS CERTAIN CRITICAL PROBLEMS IN THE TRAINING OF CIVIL ENGINEERING TECHNICIANS. THE PHILOSOPHY OF TECHNICAL EDUCATION REQUIRES ATTENTION AS DOES THE IDENTIFICATION OF STUDENTS WHO CAN BENEFIT FROM AND SUCCESSFULLY…

The Humanities in the Two-Year Agricultural Technical College.

ERIC Educational Resources Information Center

Nelson, Ronald J.

Drawing from the experiences of the University of Minnesota Technical College, Waseca (UMW), this paper provides a rationale and suggestions for promoting and integrating the humanities in vocational education. After discussions of the problems of interesting occupational students in humanities courses and the value of humanities instruction in…

Learning SQL Programming with Interactive Tools: From Integration to Personalization

ERIC Educational Resources Information Center

Brusilovsky, Pete; Sosnovsky, Sergey; Yudelson, Michael V.; Lee, Danielle H.; Zadorozhny, Vladimir; Zhou, Xin

2010-01-01

Rich, interactive eLearning tools receive a lot of attention nowadays from both practitioners and researchers. However, broader dissemination of these tools is hindered by the technical difficulties of their integration into existing platforms. This article explores the technical and conceptual problems of using several interactive educational…

Automation and the Workplace. Selected Labor, Education, and Training Issues. A Technical Memorandum.

ERIC Educational Resources Information Center

Congress of the U.S., Washington, DC. Office of Technology Assessment.

This technical memorandum discusses procedures for evaluating potential employment change associated with automation and outlines associated problems. It also describes the nature and modes of delivery of education, training, and retraining for persons holding or seeking employment in manufacturing industries. An introduction provides a brief…

Conceptual Complexity and Apparent Contradictions in Mathematics Language

ERIC Educational Resources Information Center

Gough, John

2007-01-01

Mathematics is like a language, although technically it is not a natural or informal human language, but a formal, that is, artificially constructed language. Importantly, educators use their natural everyday language to teach the formal language of mathematics. At times, however, instructors encounter problems when the technical words they use,…

Diving into Real World Challenges

ERIC Educational Resources Information Center

Saldana, Matt; Rodden, Leslie

2012-01-01

In this article, the authors discuss how educators can engage students in real world learning using their academic knowledge and technical skills. They describe how school districts have discovered that the world of robotics can help students use technical skills to solve simulated problems found in the real world, while understanding the…

Teaching Graduate Business Students to Write Clearly about Technical Topics

ERIC Educational Resources Information Center

Dyrud, Marilyn A.; Worley, Rebecca B.; Jameson, Daphne

2006-01-01

Graduate programs in business emphasize technical analysis in finance, accounting, marketing, and other core courses. Important business decisions--what market to target, which products to offer, how to finance an acquisition, whether to lease or buy equipment--require mathematical and statistical problem solving. Management communication courses…

Sophistic Ethics in the Technical Writing Classroom: Teaching "Nomos," Deliberation, and Action.

ERIC Educational Resources Information Center

Scott, J. Blake

1995-01-01

Claims that teaching ethics is particularly important to technical writing. Outlines a classical, sophistic approach to ethics based on the theories and pedagogies of Protagoras, Gorgias, and Isocrates, which emphasizes the Greek concept of "nomos," internal and external deliberation, and responsible action. Discusses problems and…

Analysis of "The Wonderful Desert." Technical Report No. 170.

ERIC Educational Resources Information Center

Green, G. M.; And Others

This report presents a text analysis of "The Wonderful Desert," a brief selection from the "Reader's Digest Skill Builder" series. (The techniques used in arriving at the analysis are presented in a Reading Center Technical Report, Number 168, "Problems and Techniques of Text Analysis.") Tables are given for a…

Postsecondary Technical Education and the Energy Crisis.

ERIC Educational Resources Information Center

Riendeau, Albert J.

The energy problem affects virtually every wage earner in America and cries out for increased involvement by vocational and technical educators. A recent study by the National Planning Association points up the need to project future manpower demands in energy and energy-related industries so that the country's educational and training…

Seminar for Preparation of Professional Personnel for Vocational-Technical Education. Final Report.

ERIC Educational Resources Information Center

Dillon, Roy D.; Horner, James T.

Seminar participants included college administrative officers, state vocational education directors, vocational-technical teacher educators, and Office of Education staff. The purpose of the June, 1968 seminar was to consider strategies for resolving critical vocational education personnel supply and demand problems. Presentations included in the…

Information Retrieval Diary of an Expert Technical Translator.

ERIC Educational Resources Information Center

Cremmins, Edward T.

1984-01-01

Recommends use of entries from the information retrieval diary of Ted Crump, expert technical translator at the National Institute of Health, in the construction of computer models showing how expert translators solve problems of ambiguity in language. Expert and inexpert translation systems, eponyms, abbreviations, and alphabetic solutions are…

75 FR 13209 - Proposed Information Collection (Technical Industry Standards) Activity: Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-18

... (Technical Industry Standards) Activity: Comment Request AGENCY: Office of Acquisition and Logistics... Industry Standards. OMB Control Number: 2900-0586. Type of Review: Extension of a currently approved collection. Abstract: VAAR provision 852.211-75, Technical Industry Standards, requires items offered for...

Innovative Approaches to Teaching Technical Communication

ERIC Educational Resources Information Center

Bridgeford, Tracy, Ed.; Kitalong, Karla Saari, Ed.; Selfe, Dickie, Ed.

2004-01-01

"Innovative Approaches to Teaching Technical Communication" offers a variety of activities, projects, and approaches to energize pedagogy in technical communication and to provide a constructive critique of current practice. A practical collection, the approaches recommended here are readily adaptable to a range of technological and institutional…

Necessity and Contention of Education on Engineer Ethics

NASA Astrophysics Data System (ADS)

Takeda, Kunihiko; Ishikawa, Tomoyuki

Using examples of major accidents caused by technical technology are effective when teaching engineering ethics in undergraduate courses because almost all students have had no actual experience in technical problems or accidents in their lives. The typical accidents that have been selected in the past for this purpose by lecturers are limited in Japanese colleges or in textbooks. Some examples are the Minamata disease, the Kanemi oil PCB contamination, the space shuttle “Challenger” accident, the Ford “Pinto” design problem, Mitsubishi Motor's scandal and the unclear power plant accident at Tokai. However, it is difficult to decide whether or not these typical accidents are suitable for the teaching of engineering ethics. The responsibility of an engineer in Japan is strictly limited because he has no authority to finally decide upon the problem of ethics even if the item is purely technical and he is the best person to make the decision. The reason is discussed focusing on 1) the concept of the “profession” of medical doctors and engineers and 2) the relationships between the treatment, position, honor and responsibility of engineers in Japanese society.

A review of Integrated Vehicle Health Management tools for legacy platforms: Challenges and opportunities

NASA Astrophysics Data System (ADS)

Esperon-Miguez, Manuel; John, Philip; Jennions, Ian K.

2013-01-01

Integrated Vehicle Health Management (IVHM) comprises a set of tools, technologies and techniques for automated detection, diagnosis and prognosis of faults in order to support platforms more efficiently. Specific challenges are faced when IVHM tools are to be retrofitted into legacy vehicles since major modifications are much more challenging than with platforms whose design can still be modified. The topics covered in this Review Paper include the state of the art of IVHM tools and how their characteristics match the requirements of legacy aircraft, a summary of problems faced in the past trying to retrofit IVHM tools both from a technical and organisational perspective and the current level of implementation of IVHM in industry. Although the technology has not reached the level necessary to implement IVHM to its full potential on every kind of component, significant progress has been achieved on rotating equipment, structures or electronics. Attempts to retrofit some of these tools in the past faced both technical difficulties and opposition by some stakeholders, the later being responsible for the failure of technically sound projects in more than one occasion. Nevertheless, despite these difficulties, products and services based on IVHM technology have started to be offered by the manufacturers and, what is more important, demanded by the operators, providing guidance on what the industry would demand from IVHM on legacy aircraft.

A History of the ARPANET: The First Decade

DTIC Science & Technology

1981-04-01

10 2.2 Major Technical Problems and Approaches 11-12 2.3 Major Changes in Objectives and Approaches 11-19 3, ,3 Scientific and Technical Results and...successful projects ever undertaken by DARPA! The program has initiated extensive changes in the Defense Department’s use of computers as well as in...the ARPANET project represents a similarly far-reaching change in the use of computers by mankind. The full impact of the technical changes set in

Bibliography of Technical Publications and Papers, October 1978 - September 1979

DTIC Science & Technology

1979-11-01

overnutrition. Symposium on Psychosocial Factors in Nutritional Problems, llth International Congress of Nutrition, Rio de Janeiro , Brazil, September...VBIOGRAPHY OF-TZHNICAL BLICATIONS AND An T7 Octber118 -Seu~imb~ 199k6. PERFORMNING OR0. REPORT NUMBER 7. AUTMOR( e ) S. CONTRACT -OR G ANT HNDMER~a) 9...Officer Advanced Class 79-2, US Army Quartermaster School, Fort Lee, VA, 14 August 1979. 6 OFFICE OF TECHNICAL DIRECTOR Technical Papers 12. ROSS, E . W

Descriptive analysis of context evaluation instrument for technical oral presentation skills evaluation: A case study in English technical communication course

NASA Astrophysics Data System (ADS)

Mohamed, Abdullah-Adnan; Asmawi, Adelina; Hamid, Mohd Rashid Ab; Mustafa, Zainol bin

2015-02-01

This paper reports a pilot study of Context Evaluation using a self-developed questionnaire distributed among engineering undergraduates at a university under study. The study aims to validate the self-developed questionnaires used in the Context evaluation, a component in the CIPP Model. The Context evaluation assesses background information for needs, assets, problems and opportunities relevant to beneficiaries of the study in a defined environment. Through the questionnaire, background information for the assessment of needs, assets and problems related to the engineering undergraduates' perceptions on the teaching and learning of technical oral presentation skills was collected and analysed. The questionnaire was developed using 5-points Likert scale to measure the constructs under study. They were distributed to 100 respondents with 79 returned. The respondents consisted of engineering undergraduates studied at various faculties at one technical university in Malaysia. The descriptive analysis of data for each item which makes up the construct for Context evaluation is found to be high. This implied that engineering undergraduates showed high interest in teaching and learning of technical oral presentation skills, thus their needs are met. Also, they agreed that assets and facilities are conducive to their learning. In conclusion, the context evaluation involving needs and assets factors are both considerably important; their needs are met and the assets and facilities do support their technical oral presentation skills learning experience.

Technical communications in aerospace - An analysis of the practices reported by U.S. and European aerospace engineers and scientists

NASA Technical Reports Server (NTRS)

Pinelli, Thomas E.; Barclay, Rebecca O.; Kennedy, John M.; Glassman, Myron

1990-01-01

The flow of scientific and technical information (STI) at the individual, organizational, national, and international levels is studied. The responses of U.S and European aerospace engineers and scientists to questionnaires concerning technical communications in aerospace are examined. Particular attention is given to the means used to communicate information and the social system of the aerospace knowledge diffusion process. Demographic data about the survey respondents are provided. The methods used to communicate technical data and the sources utilized to solve technical problems are described. The importance of technical writing skills and the use of computer technology in the aerospace field are discussed. The derived data are useful for R&D and information managers in order to improve access to and utilization of aerospace STI.

Basic Research Needs for Carbon Capture: Beyond 2020

DOE Office of Scientific and Technical Information (OSTI.GOV)

Alivisatos, Paul; Buchanan, Michelle

2010-03-04

This report is based on a SC/FE workshop on Carbon Capture: Beyond 2020, held March 4–5, 2010, to assess the basic research needed to address the current technical bottlenecks in carbon capture processes and to identify key research priority directions that will provide the foundations for future carbon capture technologies. The problem of thermodynamically efficient and scalable carbon capture stands as one of the greatest challenges for modern energy researchers. The vast majority of US and global energy use derives from fossil fuels, the combustion of which results in the emission of carbon dioxide into the atmosphere. These anthropogenic emissionsmore » are now altering the climate. Although many alternatives to combustion are being considered, the fact is that combustion will remain a principal component of the global energy system for decades to come. Today’s carbon capture technologies are expensive and cumbersome and energy intensive. If scientists could develop practical and cost-effective methods to capture carbon, those methods would at once alter the future of the largest industry in the world and provide a technical solution to one of the most vexing problems facing humanity. The carbon capture problem is a true grand challenge for today’s scientists. Postcombustion CO2 capture requires major new developments in disciplines spanning fundamental theoretical and experimental physical chemistry, materials design and synthesis, and chemical engineering. To start with, the CO2 molecule itself is thermodynamically stable and binding to it requires a distortion of the molecule away from its linear and symmetric arrangement. This binding of the gas molecule cannot be too strong, however; the sheer quantity of CO2 that must be captured ultimately dictates that the capture medium must be recycled over and over. Hence the CO2 once bound, must be released with relatively little energy input. Further, the CO2 must be rapidly and selectively pulled out of a mixture that contains many other gaseous components. The related processes of precombustion capture and oxycombustion pose similar challenges. It is this nexus of high-speed capture with high selectivity and minimal energy loss that makes this a true grand challenge problem, far beyond any of today’s artificial molecular manipulation technologies, and one whose solution will drive the advancement of molecular science to a new level of sophistication. We have only to look to nature, where such chemical separations are performed routinely, to imagine what may be achieved. The hemoglobin molecule transports oxygen in the blood rapidly and selectively and releases it with minimal energy penalty. Despite our improved understanding of how this biological system works, we have yet to engineer a molecular capture system that uses the fundamental cooperativity process that lies at the heart of the functionality of hemoglobin. While such biological examples provide inspiration, we also note that newly developed theoretical and computational capabilities; the synthesis of new molecules, materials, and membranes; and the remarkable advances in characterization techniques enabled by the Department of Energy’s measurement facilities all create a favorable environment for a major new basic research push to solve the carbon capture problem within the next decade. The Department of Energy has established a comprehensive strategy to meet the nation’s needs in the carbon capture arena. This framework has been developed following a series of workshops that have engaged all the critical stakeholder communities. The strategy that has emerged is based upon a tiered approach, with Fossil Energy taking the lead in a series of applied research programs that will test and extend our current systems. ARPA-E (Advanced Research Projects Agency–Energy) is supporting potential breakthroughs based upon innovative proposals to rapidly harness today’s technical capabilities in ways not previously considered. These needs and plans have been well summarized in the report from a recent workshop—Carbon Capture 2020, held in October 5 and 6, 2009—focused on near-term strategies for carbon capture improvements (http://www.netl.doe.gov/publications/ proceedings/09/CC2020/pdfs/Richards_Summary.pdf ). Yet the fact remains that when the carbon capture problem is looked at closely, we see today’s technologies fall far short of making carbon capture an economically viable process. This situation reinforces the need for a parallel, intensive use-inspired basic research effort to address the problem. This was the overwhelming conclusion of a recent workshop—Carbon Capture: Beyond 2020, held March 4 and 5, 2010—and is the subject of the present report. To prepare for the second workshop, an in-depth assessment of current technologies for carbon capture was conducted; the result of this study was a factual document, Technology and Applied R&D Needs for Carbon Capture: Beyond 2020. This document, which was prepared by experts in current carbon capture processes, also summarized the technological gaps or bottlenecks that limit currently available carbon capture technologies. The report considered the separation processes needed for all three CO2 emission reduction strategies—postcombustion, precombustion, and oxycombustion—and assessed three primary separation technologies based on liquid absorption, membranes, and solid adsorption. The workshop “Carbon Capture: Beyond 2020” convened approximately 80 attendees from universities, national laboratories, and industry to assess the basic research needed to address the current technical bottlenecks in carbon capture processes and to identify key research priority directions that will provide the foundations for future carbon capture technologies. The workshop began with a plenary session including speakers who summarized the extent of the carbon capture challenge, the various current approaches, and the limitations of these technologies. Workshop attendees were then given the charge to identify high-priority basic research directions that could provide revolutionary new concepts to form the basis for separation technologies in 2020 and beyond. The participants were divided into three major panels corresponding to different approaches for separating gases to reduce carbon emissions—liquid absorption, solid adsorption, and membrane separations. Two other panels were instructed to attend each of these three technology panels to assess crosscutting issues relevant to characterization and computation. At the end of the workshop, a final plenary session was convened to summarize the most critical research needs identified by the workshop attendees in each of the three major technical panels and from the two cross-cutting panels. The reports of the three technical panels included a set of high level Priority Research Directions meant to serve as inspiration to researchers in multiple disciplines—materials science, chemistry, biology, computational science, engineering, and others—to address the huge scientific challenges facing this nation and the world as we seek technologies for large-scale carbon capture beyond 2020. These Priority Research Directions were clustered around three main areas, all tightly coupled: Understand and control the dynamic atomic-level and molecular-level interactions of the targeted species with the separation media. Discover and design new materials that incorporate designed structures and functionalities tuned for optimum separation properties. Tailor capture/release processes with alternative driving forces, taking advantage of a new generation of materials. In each of the technical panels, the participants identified two major crosscutting research themes. The first was the development of new analytical tools that can characterize materials structure and molecular processes across broad spatial and temporal scales and under realistic conditions that mimic those encountered in actual separation processes. Such tools are needed to examine interfaces and thin films at the atomic and molecular levels, achieving an atomic/molecular-scale understanding of gas–host structures, kinetics, and dynamics, and understanding and control of nanoscale synthesis in multiple dimensions. A second major crosscutting theme was the development of new computational tools for theory, modeling, and simulation of separation processes. Computational techniques can be used to elucidate mechanisms responsible for observed separations, predict new desired features for advanced separations materials, and guide future experiments, thus complementing synthesis and characterization efforts. These two crosscut areas underscored the fact that the challenge for future carbon capture technologies will be met only with multidisciplinary teams of scientists and engineers. In addition, it was noted that success in this fundamental research area must be closely coupled with successful applied research to ensure the continuing assessment and maturation of new technologies as they undergo scale-up and deployment. Carbon capture is a very rich scientific problem, replete with opportunity for basic researchers to advance the frontiers of science as they engage on one of the most important technical challenges of our times. This workshop report outlines an ambitious agenda for addressing the very difficult problem of carbon capture by creating foundational new basic science. This new science will in turn pave the way for many additional advances across a broad range of scientific disciplines and technology sectors.« less

Perceptions of good medical practice in the NHS: a survey of senior health professionals.

PubMed

Hutchinson, A; Williams, M; Meadows, K; Barbour, R S; Jones, R

1999-12-01

To categorize senior health professionals' experience with poor medical practice in hospitals and in general practice, to describe perceptions which senior NHS staff have of good medical practice, and to describe how problems of poor medical practice are currently managed. A postal questionnaire survey. The questionnaire sought perceptions of good medical practice, asked participants to characterise deviations from good practice, and to describe experience with managing poor performance at the time of the introduction of the General Medical Council (GMC) performance procedures. A range of NHS settings in the UK: hospital trusts, health authorities/boards, local medical committees, community health councils. Senior health professionals involved in the management of medical professional performance. Perceptions of what constitutes good medical practice. Most respondents considered that persistent problems related to clinical practice (diagnosis, management, and outcome and prescribing) would require local management and, possibly, referral to the GMC performance procedures. Informal mechanisms, including informal discussion, education, training, and work shifting, were the most usual means of handling a doctor whose performance was poor. Many took a less serious view of deficiencies in performance on manner and attitude and communication, although consultation skills rather than technical skills comprised the greatest number of complaints about doctors. Senior NHS professionals seem reluctant to consider persistently poor consultation skills in the same critical light as they do persistently poor technical practice. These attitudes may need to change with the implementation of clinical governance and updated guidance from the GMC on what constitutes good medical practice.

Towards the systematic development of medical networking technology.

PubMed

Faust, Oliver; Shetty, Ravindra; Sree, S Vinitha; Acharya, Sripathi; Acharya U, Rajendra; Ng, E Y K; Poo, Chua Kok; Suri, Jasjit

2011-12-01

Currently, there is a disparity in the availability of doctors between urban and rural areas of developing countries. Most experienced doctors and specialists, as well as advanced diagnostic technologies, are available in urban areas. People living in rural areas have less or sometimes even no access to affordable healthcare facilities. Increasing the number of doctors and charitable medical hospitals or deploying advanced medical technologies in these areas might not be economically feasible, especially in developing countries. We need to mobilize science and technology to master this complex, large scale problem in an objective, logical, and professional way. This can only be achieved with a collaborative effort where a team of experts works on both technical and non-technical aspects of this health care divide. In this paper we use a systems engineering framework to discuss hospital networks which might be solution for the problem. We argue that with the advancement in communication and networking technologies, economically middle class people and even some rural poor have access to internet and mobile communication systems. Thus, Hospital Digital Networking Technologies (HDNT), such as telemedicine, can be developed to utilize internet, mobile and satellite communication systems to connect primitive rural healthcare centers to well advanced modern urban setups and thereby provide better consultation and diagnostic care to the needy people. This paper describes requirements and limitations of the HDNTs. It also presents the features of telemedicine, the implementation issues and the application of wireless technologies in the field of medical networking.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cochran, J.R.; Danneels, J.; Kenagy, W.D.

The Al Tuwaitha nuclear complex near Baghdad contains a significant number of nuclear facilities from Saddam Hussein's dictatorship. Because of past military operations, lack of upkeep and looting there is now an enormous radioactive waste problem at Al Tuwaitha. Al Tuwaitha contains uncharacterised radioactive wastes, yellow cake, sealed radioactive sources, and contaminated metals. The current security situation in Iraq hampers all aspects of radioactive waste management. Further, Iraq has never had a radioactive waste disposal facility, which means that ever increasing quantities of radioactive waste and material must be held in guarded storage. The Iraq Nuclear Facility Dismantlement and Disposalmore » Program (the NDs Program) has been initiated by the U.S. Department of State (DOS) to assist the Government of Iraq (GOI) in eliminating the threats from poorly controlled radioactive materials, while building human capacities so that the GOI can manage other environmental cleanups in their country. The DOS has funded the International Atomic Energy Agency (IAEA) to provide technical assistance to the GOI via a Technical Cooperation Project. Program coordination will be provided by the DOS, consistent with U.S. and GOI policies, and Sandia National Laboratories will be responsible for coordination of participants and for providing waste management support. Texas Tech University will continue to provide in-country assistance, including radioactive waste characterization and the stand-up of the Iraq Nuclear Services Company. The GOI owns the problems in Iraq and will be responsible for the vast majority of the implementation of the NDs Program. (authors)« less

Training considerations for the intracoelomic implantation of electronic tags in fish with a summary of common surgical errors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cooke, Steven J.; Wagner, Glenn N.; Brown, Richard S.

2011-01-01

Training is a fundamental part of all scientific and technical disciplines. This is particularly true for all types of surgeons. For surgical procedures, a number of skills are necessary to reduce mistakes. Trainees must learn an extensive yet standardized set of problem-solving and technical skills to handle challenges as they arise. There are currently no guidelines or consistent training methods for those intending to implant electronic tags in fish; this is surprising, considering documented cases of negative consequences of fish surgeries and information from studies having empirically tested fish surgical techniques. Learning how to do fish surgery once is insufficientmore » for ensuring the maintenance or improvement of surgical skill. Assessment of surgical skills is rarely incorporated into training, and is needed. Evaluation provides useful feedback that guides future learning, fosters habits of self-reflection and self-remediation, and promotes access to advanced training. Veterinary professionals should be involved in aspects of training to monitor basic surgical principles. We identified attributes related to knowledge, understanding, and skill that surgeons must demonstrate prior to performing fish surgery including a “hands-on” assessment using live fish. Included is a summary of common problems encountered by fish surgeons. We conclude by presenting core competencies that should be required as well as outlining a 3-day curriculum for training surgeons to conduct intracoelomic implantation of electronic tags. This curriculum could be offered through professional fisheries societies as professional development courses.« less

The Problem of Technical Progress and Mineral Resources

ERIC Educational Resources Information Center

Lukashev, Konstantin I.

1974-01-01

Examines the estimates of known potential reserves of the major raw materials, future sources therof, the geological and technological problems associated with these, the manufacture of artifical minerals, and international cooperation in this sphere. (Author/GS)

1992

EPA Science Inventory

There are two classes of statistical issues: firm issues amenable to problem statement and technical resolution and soft issues that have qualitative dimensions and ideological implications. irm issues are easy: defining and stating the problem is much of the solution. he soft is...

Three Years of Global Positioning System Experience on International Space Station

NASA Technical Reports Server (NTRS)

Gomez, Susan

2005-01-01

The International Space Station global positioning systems (GPS) receiver was activated in April 2002. Since that time, numerous software anomalies surfaced that had to be worked around. Some of the software problems required waivers, such as the time function, while others required extensive operator intervention, such as numerous power cycles. Eventually, enough anomalies surfaced that the three pieces of code included in the GPS unit have been re-written and the GPS units were upgraded. The technical aspects of the problems are discussed, as well as the underlying causes that led to the delivery of a product that has had numerous problems. The technical aspects of the problems included physical phenomena that were not well understood, such as the affect that the ionosphere would have on the GPS measurements. The underlying causes were traced to inappropriate use of legacy software, changing requirements, inadequate software processes, unrealistic schedules, incorrect contract type, and unclear ownership responsibilities.

Three Years of Global Positioning System Experience on International Space Station

NASA Technical Reports Server (NTRS)

Gomez, Susan

2006-01-01

The International Space Station global positioning system (GPS) receiver was activated in April 2002. Since that time, numerous software anomalies surfaced that had to be worked around. Some of the software problems required waivers, such as the time function, while others required extensive operator intervention, such as numerous power cycles. Eventually enough anomalies surfaced that the three pieces of code included in the GPS unit have been re-written and the GPS units upgraded. The technical aspects of the problems are discussed, as well as the underlying causes that led to the delivery of a product that has had so many problems. The technical aspects of the problems included physical phenomena that were not well understood, such as the affect that the ionosphere would have on the GPS measurements. The underlying causes were traced to inappropriate use of legacy software, changing requirements, inadequate software processes, unrealistic schedules, incorrect contract type, and unclear ownership responsibilities..

Computer technologies and institutional memory

NASA Technical Reports Server (NTRS)

Bell, Christopher; Lachman, Roy

1989-01-01

NASA programs for manned space flight are in their 27th year. Scientists and engineers who worked continuously on the development of aerospace technology during that period are approaching retirement. The resulting loss to the organization will be considerable. Although this problem is general to the NASA community, the problem was explored in terms of the institutional memory and technical expertise of a single individual in the Man-Systems division. The main domain of the expert was spacecraft lighting, which became the subject area for analysis in these studies. The report starts with an analysis of the cumulative expertise and institutional memory of technical employees of organizations such as NASA. A set of solutions to this problem are examined and found inadequate. Two solutions were investigated at length: hypertext and expert systems. Illustrative examples were provided of hypertext and expert system representation of spacecraft lighting. These computer technologies can be used to ameliorate the problem of the loss of invaluable personnel.

National Institute of Statistical Sciences Data Confidentiality Technical Panel: Final Report. NCES 2011-608

ERIC Educational Resources Information Center

Karr, Alan

2011-01-01

NCES asked the National Institute of Statistical Sciences (NISS) to convene a technical panel of survey and policy experts to examine the NCES current and planned data dissemination strategies for confidential data with respect to: mandates and directives that NCES make data available; current and prospective technologies for protecting and…

75 FR 28857 - Agency Information Collection (Technical Industry Standards) Activities Under OMB Review

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-24

... (Technical Industry Standards) Activities Under OMB Review AGENCY: Office of Acquisition and Logistics... Industry Standards. OMB Control Number: 2900-0586. Type of Review: Extension of a currently approved collection. Abstract: VAAR provision 852.211-75, Technical Industry Standards, requires that items offered...

Astronomical Book Trek: Astronomy Books of 1983.

ERIC Educational Resources Information Center

Fraknoi, Andrew

1984-01-01

Presents an annotated list of technical and non-technical astronomy books. Topic areas of non-technical books include general astronomy, amateur astronomy, computers and astronomy, history of astronomy, pseudoscience, space exploration, physics and astronomy, and textbooks. Each entry includes author, title, description, source, and current cost.…

Simulation-based ureteroscopy skills training curriculum with integration of technical and non-technical skills: a randomised controlled trial.

PubMed

Brunckhorst, Oliver; Shahid, Shahab; Aydin, Abdullatif; McIlhenny, Craig; Khan, Shahid; Raza, Syed Johar; Sahai, Arun; Brewin, James; Bello, Fernando; Kneebone, Roger; Khan, Muhammad Shamim; Dasgupta, Prokar; Ahmed, Kamran

2015-09-01

Current training modalities within ureteroscopy have been extensively validated and must now be integrated within a comprehensive curriculum. Additionally, non-technical skills often cause surgical error and little research has been conducted to combine this with technical skills teaching. This study therefore aimed to develop and validate a curriculum for semi-rigid ureteroscopy, integrating both technical and non-technical skills teaching within the programme. Delphi methodology was utilised for curriculum development and content validation, with a randomised trial then conducted (n = 32) for curriculum evaluation. The developed curriculum consisted of four modules; initially developing basic technical skills and subsequently integrating non-technical skills teaching. Sixteen participants underwent the simulation-based curriculum and were subsequently assessed, together with the control cohort (n = 16) within a full immersion environment. Both technical (Time to completion, OSATS and a task specific checklist) and non-technical (NOTSS) outcome measures were recorded with parametric and non-parametric analyses used depending on the distribution of our data as evaluated by a Shapiro-Wilk test. Improvements within the intervention cohort demonstrated educational value across all technical and non-technical parameters recorded, including time to completion (p < 0.01), OSATS scores (p < 0.001), task specific checklist scores (p = 0.011) and NOTSS scores (p < 0.001). Content validity, feasibility and acceptability were all demonstrated through curriculum development and post-study questionnaire results. The current developed curriculum demonstrates that integrating both technical and non-technical skills teaching is both educationally valuable and feasible. Additionally, the curriculum offers a validated simulation-based training modality within ureteroscopy and a framework for the development of other simulation-based programmes.

Dealing With Shallow-Water Flow in the Deepwater Gulf of Mexico

NASA Astrophysics Data System (ADS)

Ostermeier, R.

2006-05-01

Some of the Shell experience in dealing with the shallow-water flow problem in the Deepwater Gulf of Mexico (GOM) will be presented. The nature of the problem, including areal extent and over-pressuring mechanisms, will be discussed. Methods for sand prediction and shallow sediment and flow characterization will be reviewed. These include seismic techniques, the use of geo-technical wells, regional trends, and various MWD methods. Some examples of flow incidents with pertinent drilling issues, including well failures and abandonment, will be described. To address the shallow-water flow problem, Shell created a multi-disciplinary team of specialists in geology, geophysics, petrophysics, drilling, and civil engineering. The team developed several methodologies to deal with various aspects of the problem. These include regional trends and data bases, shallow seismic interpretation and sand prediction, well site and casing point selection, geo-technical well design and data interpretation, logging program design and interpretation, cementing design and fluids formulation, methods for remediation and mitigation of lost circulation, and so on. Shell's extensive Deepwater GOM drilling experience has lead to new understanding of the problem. Examples include delineation of trends in shallow water flow occurrence and severity, trends and departures in PP/FG, rock properties pertaining to seismic identification of sands, and so on. New knowledge has also been acquired through the use of geo-technical wells. One example is the observed rapid onset and growth of over-pressures below the mudline. Total trouble costs due to shallow water flow for all GOM operators almost certainly runs into the several hundred million dollars. Though the problem remains a concern, advances in our knowledge and understanding make it a problem that is manageable and not the "show stopper" once feared.

Teachers' ICT and Problem-Solving Skills: Competencies and Needs. Education Indicators in Focus. No. 40

ERIC Educational Resources Information Center

OECD Publishing, 2016

2016-01-01

The education sector performs well for information and communication technology (ICT) and problem-solving skills, although it still lags behind the professional, scientific and technical activities sector. Primary and secondary teachers have better ICT and problem-solving skills than the general population, and similar skills to other…

Solving Problems in Hawaiian-American Classrooms: Excellent Teaching and Cultural Factors. Technical Report #2.

ERIC Educational Resources Information Center

Gallimore, Ronald; And Others

This paper describes a community research project which preceded the development of the Kamehameha Early Education Project (KEEP). The community project was designed to assist teachers in solving classroom behavior and academic problems. The initial focus on workshops and theories proved inadequate for dealing with daily classroom problems. A…

The Evolution of a Flipped Classroom: Evidence-Based Recommendations

ERIC Educational Resources Information Center

Velegol, Stephanie Butler; Zappe, Sarah E.; Mahoney, Emily

2015-01-01

Engineering students benefit from an active and interactive classroom environment where they can be guided through the problem solving process. Typically faculty members spend class time presenting the technical content required to solve problems, leaving students to apply this knowledge and problem solve on their own at home. There has recently…

Comparing problem-based learning and lecture as methods to teach whole-systems design to engineering students

NASA Astrophysics Data System (ADS)

Dukes, Michael Dickey

The objective of this research is to compare problem-based learning and lecture as methods to teach whole-systems design to engineering students. A case study, Appendix A, exemplifying successful whole-systems design was developed and written by the author in partnership with the Rocky Mountain Institute. Concepts to be tested were then determined, and a questionnaire was developed to test students' preconceptions. A control group of students was taught using traditional lecture methods, and a sample group of students was taught using problem-based learning methods. After several weeks, the students were given the same questionnaire as prior to the instruction, and the data was analyzed to determine if the teaching methods were effective in correcting misconceptions. A statistically significant change in the students' preconceptions was observed in both groups on the topic of cost related to the design process. There was no statistically significant change in the students' preconceptions concerning the design process, technical ability within five years, and the possibility of drastic efficiency gains with current technologies. However, the results were inconclusive in determining that problem-based learning is more effective than lecture as a method for teaching the concept of whole-systems design, or vice versa.

A survey of body sensor networks.

PubMed

Lai, Xiaochen; Liu, Quanli; Wei, Xin; Wang, Wei; Zhou, Guoqiao; Han, Guangyi

2013-04-24

The technology of sensor, pervasive computing, and intelligent information processing is widely used in Body Sensor Networks (BSNs), which are a branch of wireless sensor networks (WSNs). BSNs are playing an increasingly important role in the fields of medical treatment, social welfare and sports, and are changing the way humans use computers. Existing surveys have placed emphasis on the concept and architecture of BSNs, signal acquisition, context-aware sensing, and system technology, while this paper will focus on sensor, data fusion, and network communication. And we will introduce the research status of BSNs, the analysis of hotspots, and future development trends, the discussion of major challenges and technical problems facing currently. The typical research projects and practical application of BSNs are introduced as well. BSNs are progressing along the direction of multi-technology integration and intelligence. Although there are still many problems, the future of BSNs is fundamentally promising, profoundly changing the human-machine relationships and improving the quality of people's lives.

A concept for the modernization of underground mining master maps based on the enrichment of data definitions and spatial database technology

NASA Astrophysics Data System (ADS)

Krawczyk, Artur

2018-01-01

In this article, topics regarding the technical and legal aspects of creating digital underground mining maps are described. Currently used technologies and solutions for creating, storing and making digital maps accessible are described in the context of the Polish mining industry. Also, some problems with the use of these technologies are identified and described. One of the identified problems is the need to expand the range of mining map data provided by survey departments to other mining departments, such as ventilation maintenance or geological maintenance. Three solutions are proposed and analyzed, and one is chosen for further analysis. The analysis concerns data storage and making survey data accessible not only from paper documentation, but also directly from computer systems. Based on enrichment data, new processing procedures are proposed for a new way of presenting information that allows the preparation of new cartographic representations (symbols) of data with regard to users' needs.

Iceberg cometh

DOE Office of Scientific and Technical Information (OSTI.GOV)

Weeks, W.F.; Mellor, M.

1979-08-01

The feasibility of melting icebergs to obtain supplies of liquid fresh water is, while still undemonstrated, worth considering in view of the nearly 30 million cubic kilometers of fresh water ice in the world. Most of the fresh water ice is in the Antarctic Ice Sheet, which has tabular icebergs of regular shape and comparatively easy access for towing to the Southern Hemisphere. Several development proposals have been made for Southern California, Australia, and the Middle East. The authors describe the nature of icebergs, some of the technical problems of towing (such as wind and ocean currents and the ratemore » of melting), and possible environmental impacts when the iceberg arrives at its destination. They suggest that time spent in selecting favorable icebergs will improve the economics. Innovative equipment for tugboats and a refrigerated drydock to retard melting could minimize some of the towing problems. Exploitation of the iceberg upon arrival could also include its use as an energy sink. 6 references.« less

Speaking in Character: Voice Communication in Virtual Worlds

NASA Astrophysics Data System (ADS)

Wadley, Greg; Gibbs, Martin R.

This chapter summarizes 5 years of research on the implications of introducing voice communication systems to virtual worlds. Voice introduces both benefits and problems for players of fast-paced team games, from better coordination of groups and greater social presence of fellow players on the positive side, to negative features such as channel congestion, transmission of noise, and an unwillingness by some to use voice with strangers online. Similarly, in non-game worlds like Second Life, issues related to identity and impression management play important roles, as voice may build greater trust that is especially important for business users, yet it erodes the anonymity and ability to conceal social attributes like gender that are important for other users. A very different mixture of problems and opportunities exists when users conduct several simultaneous conversations in multiple text and voice channels. Technical difficulties still exist with current systems, including the challenge of debugging and harmonizing all the participants' voice setups. Different groups use virtual worlds for very different purposes, so a single modality may not suit all.

Automation life-cycle cost model

NASA Technical Reports Server (NTRS)

Gathmann, Thomas P.; Reeves, Arlinda J.; Cline, Rick; Henrion, Max; Ruokangas, Corinne

1992-01-01

The problem domain being addressed by this contractual effort can be summarized by the following list: Automation and Robotics (A&R) technologies appear to be viable alternatives to current, manual operations; Life-cycle cost models are typically judged with suspicion due to implicit assumptions and little associated documentation; and Uncertainty is a reality for increasingly complex problems and few models explicitly account for its affect on the solution space. The objectives for this effort range from the near-term (1-2 years) to far-term (3-5 years). In the near-term, the envisioned capabilities of the modeling tool are annotated. In addition, a framework is defined and developed in the Decision Modelling System (DEMOS) environment. Our approach is summarized as follows: Assess desirable capabilities (structure into near- and far-term); Identify useful existing models/data; Identify parameters for utility analysis; Define tool framework; Encode scenario thread for model validation; and Provide transition path for tool development. This report contains all relevant, technical progress made on this contractual effort.

Electro optical system to measure strains at high temperature

NASA Technical Reports Server (NTRS)

Sciammarella, Cesar A.

1991-01-01

The measurement of strains at temperatures of the order of 1000 C has become a very important field of research. Technological advances in areas such as the analysis of high speed aircraft structures and high efficiency thermal engines require operational temperatures of this order of magnitude. Current techniques for the measurement of strains, such as electrical strain gages, are at the limit of their useful range and new methods need to be developed. Optical techniques are very attractive in this type of application because of their noncontacting nature. Holography is of particular interest because a minimal preparation of the surfaces is required. Optoelectronics holography is specially suited for this type of application, from the point of view of industrial use. There are a number of technical problems that need to be overcome to measure strains using holographic interferometry at high temperatures. Some of these problems are discussed, and solutions are given. A specimen instrumented with high temperature strains gages is used to compare the results of both technologies.

Electro optical system to measure strains at high temperature

NASA Astrophysics Data System (ADS)

Sciammarella, Cesar A.

1991-12-01

The measurement of strains at temperatures of the order of 1000 C has become a very important field of research. Technological advances in areas such as the analysis of high speed aircraft structures and high efficiency thermal engines require operational temperatures of this order of magnitude. Current techniques for the measurement of strains, such as electrical strain gages, are at the limit of their useful range and new methods need to be developed. Optical techniques are very attractive in this type of application because of their noncontacting nature. Holography is of particular interest because a minimal preparation of the surfaces is required. Optoelectronics holography is specially suited for this type of application, from the point of view of industrial use. There are a number of technical problems that need to be overcome to measure strains using holographic interferometry at high temperatures. Some of these problems are discussed, and solutions are given. A specimen instrumented with high temperature strains gages is used to compare the results of both technologies.

Methods, caveats and the future of large-scale microelectrode recordings in the non-human primate

PubMed Central

Dotson, Nicholas M.; Goodell, Baldwin; Salazar, Rodrigo F.; Hoffman, Steven J.; Gray, Charles M.

2015-01-01

Cognitive processes play out on massive brain-wide networks, which produce widely distributed patterns of activity. Capturing these activity patterns requires tools that are able to simultaneously measure activity from many distributed sites with high spatiotemporal resolution. Unfortunately, current techniques with adequate coverage do not provide the requisite spatiotemporal resolution. Large-scale microelectrode recording devices, with dozens to hundreds of microelectrodes capable of simultaneously recording from nearly as many cortical and subcortical areas, provide a potential way to minimize these tradeoffs. However, placing hundreds of microelectrodes into a behaving animal is a highly risky and technically challenging endeavor that has only been pursued by a few groups. Recording activity from multiple electrodes simultaneously also introduces several statistical and conceptual dilemmas, such as the multiple comparisons problem and the uncontrolled stimulus response problem. In this perspective article, we discuss some of the techniques that we, and others, have developed for collecting and analyzing large-scale data sets, and address the future of this emerging field. PMID:26578906

A Survey of Body Sensor Networks

PubMed Central

Lai, Xiaochen; Liu, Quanli; Wei, Xin; Wang, Wei; Zhou, Guoqiao; Han, Guangyi

2013-01-01

The technology of sensor, pervasive computing, and intelligent information processing is widely used in Body Sensor Networks (BSNs), which are a branch of wireless sensor networks (WSNs). BSNs are playing an increasingly important role in the fields of medical treatment, social welfare and sports, and are changing the way humans use computers. Existing surveys have placed emphasis on the concept and architecture of BSNs, signal acquisition, context-aware sensing, and system technology, while this paper will focus on sensor, data fusion, and network communication. And we will introduce the research status of BSNs, the analysis of hotspots, and future development trends, the discussion of major challenges and technical problems facing currently. The typical research projects and practical application of BSNs are introduced as well. BSNs are progressing along the direction of multi-technology integration and intelligence. Although there are still many problems, the future of BSNs is fundamentally promising, profoundly changing the human-machine relationships and improving the quality of people's lives. PMID:23615581

An XUV/VUV free-electron laser oscillator

NASA Astrophysics Data System (ADS)

Goldstein, J. C.; Newnam, B. E.; Cooper, R. K.; Comly, J. C., Jr.

Problems regarding the extension of free-electron laser technology from the visible and near infrared region, where such devices are currently operating, to the ultraviolet have recently been extensively discussed. It was found that significant technical problems must be overcome before free-electron lasers (FELs) can be operated in the VUV (100-200 nm) and the XUV (50-100). However, the present lack of other intense and tunable sources of coherent radiation at these wavelengths together with the intrinsic properties of FELs make the development of such devices potentially very rewarding. The properties of FELs include continuous tunability in wavelength and output in the form of a train of picosecond pulses. An investigation is conducted regarding the feasibility of an operation of a FEL in the XUV/VUV regions, taking into account a theoretical model. It is found that modest improvements in electron beam and optical mirror technologies will make the design of a FEL for operation in the 50-200-nm range of optical wavelength possible.

NASA pyrotechnically actuated systems program

NASA Technical Reports Server (NTRS)

Schulze, Norman R.

1993-01-01

The Office of Safety and Mission Quality initiated a Pyrotechnically Actuated Systems (PAS) Program in FY-92 to address problems experienced with pyrotechnically actuated systems and devices used both on the ground and in flight. The PAS Program will provide the technical basis for NASA's projects to incorporate new technological developments in operational systems. The program will accomplish that objective by developing/testing current and new hardware designs for flight applications and by providing a pyrotechnic data base. This marks the first applied pyrotechnic technology program funded by NASA to address pyrotechnic issues. The PAS Program has been structured to address the results of a survey of pyrotechnic device and system problems with the goal of alleviating or minimizing their risks. Major program initiatives include the development of a Laser Initiated Ordnance System, a pyrotechnic systems data base, NASA Standard Initiator model, a NASA Standard Linear Separation System and a NASA Standard Gas Generator. The PAS Program sponsors annual aerospace pyrotechnic systems workshops.

Captive breeding of pangolins: current status, problems and future prospects

PubMed Central

Hua, Liushuai; Gong, Shiping; Wang, Fumin; Li, Weiye; Ge, Yan; Li, Xiaonan; Hou, Fanghui

2015-01-01

Abstract Pangolins are unique placental mammals with eight species existing in the world, which have adapted to a highly specialized diet of ants and termites, and are of significance in the control of forest termite disaster. Besides their ecological value, pangolins are extremely important economic animals with the value as medicine and food. At present, illegal hunting and habitat destruction have drastically decreased the wild population of pangolins, pushing them to the edge of extinction. Captive breeding is an important way to protect these species, but because of pangolin’s specialized behaviors and high dependence on natural ecosystem, there still exist many technical barriers to successful captive breeding programs. In this paper, based on the literatures and our practical experience, we reviewed the status and existing problems in captive breeding of pangolins, including four aspects, the naturalistic habitat, dietary husbandry, reproduction and disease control. Some recommendations are presented for effective captive breeding and protection of pangolins. PMID:26155072

Training conservation practitioners to be better decision makers

USGS Publications Warehouse

Johnson, Fred A.; Eaton, Mitchell J.; Williams, James H.; Jensen, Gitte H.; Madsen, Jesper

2015-01-01

Traditional conservation curricula and training typically emphasizes only one part of systematic decision making (i.e., the science), at the expense of preparing conservation practitioners with critical skills in values-setting, working with decision makers and stakeholders, and effective problem framing. In this article we describe how the application of decision science is relevant to conservation problems and suggest how current and future conservation practitioners can be trained to be better decision makers. Though decision-analytic approaches vary considerably, they all involve: (1) properly formulating the decision problem; (2) specifying feasible alternative actions; and (3) selecting criteria for evaluating potential outcomes. Two approaches are available for providing training in decision science, with each serving different needs. Formal education is useful for providing simple, well-defined problems that allow demonstrations of the structure, axioms and general characteristics of a decision-analytic approach. In contrast, practical training can offer complex, realistic decision problems requiring more careful structuring and analysis than those used for formal training purposes. Ultimately, the kinds and degree of training necessary depend on the role conservation practitioners play in a decision-making process. Those attempting to facilitate decision-making processes will need advanced training in both technical aspects of decision science and in facilitation techniques, as well as opportunities to apprentice under decision analysts/consultants. Our primary goal should be an attempt to ingrain a discipline for applying clarity of thought to all decisions.

Identifying Needed Technical Standards: The LITA TESLA Committee at Work.

ERIC Educational Resources Information Center

Carter, Ruth C.

1984-01-01

Efforts of the Technical Standards for Library Automation Committee (TESLA), a division-wide committee of the Library Information and Technology Association (LITA) of the American Library Association, are described. The current status of suggested technical standards and recommended action are detailed. Five sources are given. (Author/EJS)

Technical Communication in the 21st Century: Where Are We Going?

ERIC Educational Resources Information Center

Killingsworth, M. Jimmie

1999-01-01

Explores how technical communicators arrive at their attitudes toward the future and the effects of such attitudes toward current practice. Argues for a critically informed, open-minded approach to the future, an approach that encourages an honest self-criticism within the discipline of technical communication. (SC)

Trends in Career and Technical Education Research

ERIC Educational Resources Information Center

Rojewski, Jay W.; Asunda, Paul; Kim, Soo Jung

2008-01-01

The purpose of this literature review was to identify current trends and issues in research focusing on career and technical education (CTE). The primary sources of literature for this review included all research articles published in three refereed scholarly journals--"Career and Technical Education Research," "Journal of Career and Technical…

77 FR 60430 - Meeting of the Mobile Sources Technical Review Subcommittee

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-03

... ENVIRONMENTAL PROTECTION AGENCY [FRL-9736-3] Meeting of the Mobile Sources Technical Review... Advisory Committee Act, Public Law 92- 463, notice is hereby given that the Mobile Sources Technical Review... Advisory Committee. This is an open meeting. The meeting will include discussion of current topics and...

DOE technical standards list: Department of Energy standards index

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

This technical standards list (TSL) was prepared for use by personnel involved in the selection and use of US DOE technical standards and other government and non-government standards. This TSL provides listings of current DOE technical standards, non-government standards that have been adopted by DOE, other government documents in which DOE has a recorded interest, and cancelled DOE technical standards. Standards are indexed by type in the appendices to this document. Definitions of and general guidance for the use of standards are also provided.

Alternative vehicle detection technologies for traffic signal systems : technical report.

DOT National Transportation Integrated Search

2009-02-01

Due to the well-documented problems associated with inductive loops, most jurisdictions have : replaced many intersection loops with video image vehicle detection systems (VIVDS). While VIVDS : have overcome some of the problems with loops such as tr...

The Effect of Web-Based Collaborative Learning Methods to the Accounting Courses in Technical Education

ERIC Educational Resources Information Center

Cheng, K. W. Kevin

2009-01-01

This study mainly explored the effect of applying web-based collaborative learning instruction to the accounting curriculum on student's problem-solving attitudes in Technical Education. The research findings and proposed suggestions would serve as a reference for the development of accounting-related curricula and teaching strategies. To achieve…

Power, Language, and Professional Choices: A Hermeneutic Approach To Teaching Technical Communication.

ERIC Educational Resources Information Center

Tillery, Denise

2001-01-01

Argues that the philosophical hermeneutics of Hans-Georg Gadamer provides a useful theoretical framework from which to discuss ethical issues in the technical communication classroom. Analyzes a previously published case study to demonstrate how hermeneutics can shed light on the ways that writers can be unconscious of ethical problems in their…

Defining Projects to Integrate Evolving Team Fundamentals and Project Management Skills

ERIC Educational Resources Information Center

Smith, Harold, III; Smarkusky, Debra; Corrigall, Elizabeth

2008-01-01

Industry has indicated the desire for academic programs to produce graduates that are well-versed in collaborative problem solving and general project management concepts in addition to technical skills. The primary focus of a curriculum is typically centered on the technical training with minimal attention given to coalescing team and project…

Interactive Methods of Teaching Physics at Technical Universities

ERIC Educational Resources Information Center

Krišták, L'uboš; Nemec, Miroslav; Danihelová, Zuzana

2014-01-01

The paper presents results of "non-traditional" teaching of the basic course of Physics in the first year of study at the Technical University in Zvolen, specifically teaching via interactive method enriched with problem tasks and experiments. This paper presents also research results of the use of the given method in conditions of…

The (Un)Attractiveness of Vocational and Technical Education: Theoretical Background

ERIC Educational Resources Information Center

Lovšin, Miha

2014-01-01

This paper considers the problem of the lack of attractiveness of vocational and technical education via a review of legislation on counselling practices, implementing documents, and the social factors by means of which the education system can influence the individual's decision. It is apparent that legislation regulating the organisation and…

NATIONAL VOCATIONAL-TECHNICAL EDUCATION SEMINAR ON OCCUPATIONAL MOBILITY AND MIGRATION. CENTER SEMINAR AND CONFERENCE REPORT, NUMBER 2.

ERIC Educational Resources Information Center

BEARD, H.G.

THIRTY-THREE STATE-LEVEL LEADERS WITH RESEARCH RESPONSIBILITIES IN VOCATIONAL-TECHNICAL EDUCATION FROM 23 STATES AND TERRITORIES ATTENDED THE SEMINAR WHICH HAD THE OBJECTIVES TO -- (1) SECURE A BETTER UNDERSTANDING OF THE PROBLEMS AND DECISIONS FACING EDUCATIONAL POLICYMAKERS, PROGRAM PLANNERS, ADMINISTRATORS, AND TEACHERS, (2) DEVELOP A…

Water Quality Criteria, Report of the National Technical Advisory Committee to the Secretary of the Interior.

ERIC Educational Resources Information Center

Department of the Interior, Washington, DC. Federal Water Pollution Control Administration.

Contained are reports of five subcommittees of the National Technical Advisory Committee on Water Quality Criteria. Subcommittees were recreation and aesthetics; public water supplies; fish, other aquatic life, and wildlife; agricultural uses; and industrial water supplies. Each committee report contains discussion of the problem area, criteria…

A Formal Theory of Perception. Technical Report No. 161.

ERIC Educational Resources Information Center

Rottmayer, William Arthur

An attempt to build a mathematical model of a device that could learn geometry is discussed. The report discusses the background and motivation of the study, the coding problem, the derivation of Suppes "Stimulus-Response Theory of Finite Automata" used in the work in learning theory, and a summary of the technical work. (DB)

A State Response to Indian Vocational Education.

ERIC Educational Resources Information Center

McConnell, Bruce

In 1977 more than 500 Native Americans attended Wisconsin's vocational, technical and adult schools located in the state's 16 vocational-technical districts. While many problems still lack a clear identification and many new programs are needed to meet the needs of Native Americans, a great deal of progress has been made. A group of four Indians…

Learning Objects and Virtual Learning Environments Technical Evaluation Criteria

ERIC Educational Resources Information Center

Kurilovas, Eugenijus; Dagiene, Valentina

2009-01-01

The main scientific problems investigated in this article deal with technical evaluation of quality attributes of the main components of e-Learning systems (referred here as DLEs--Digital Libraries of Educational Resources and Services), i.e., Learning Objects (LOs) and Virtual Learning Environments (VLEs). The main research object of the work is…

Exploring Atypical Verb+Noun Combinations in Learner Technical Writing

ERIC Educational Resources Information Center

Luzon Marco, Maria Jose

2011-01-01

Professional and academic discourse is characterised by a specific phraseology, which usually poses problems for students. This paper investigates atypical verb+noun collocations in a corpus of English technical writing of Spanish students. I focus on the type of verbs that most frequently occurred in these awkward or questionable combinations and…

Project T.E.A.M. (Technical Education Advancement Modules). Advanced Statistical Process Control.

ERIC Educational Resources Information Center

Dunlap, Dale

This instructional guide, one of a series developed by the Technical Education Advancement Modules (TEAM) project, is a 20-hour advanced statistical process control (SPC) and quality improvement course designed to develop the following competencies: (1) understanding quality systems; (2) knowing the process; (3) solving quality problems; and (4)…

Knowledge as a Resource--Networks Do Matter: A Study of SME Firms in Rural Illinois.

ERIC Educational Resources Information Center

Solymossy, Emeric

2000-01-01

Networks among people and businesses facilitate the capture and diffusion of technical and organizational knowledge and can be classified by type of knowledge being exchanged. Types include buyer-supplier information, technical problem-solving information, and informal community information. A survey of 141 small and medium-sized enterprises…

Problem Solving Skills of Hispanic College Students.

ERIC Educational Resources Information Center

Gerace, William J.; Mestre, Jose P.

Minorities have for some time been underrepresented in the technical fields, such as engineering and computer science. This development is known to be caused by a variety of factors, but the primary purpose of this report is to help identify those factors that adversely affect the cognitive development of the technical bilingual student in terms…

More than Sanctions: Closing Achievement Gaps through California's Use of Intensive Technical Assistance

ERIC Educational Resources Information Center

Strunk, Katharine O.; McEachin, Andrew

2014-01-01

One of the enduring problems in education is the persistence of achievement gaps between White, wealthy, native English-speaking students and their counterparts who are minority, lower-income, or English language learners. This study shows that one intensive technical assistance (TA) intervention--California's District Assistance and Intervention…

Performance Problems in Service Contracting

DTIC Science & Technology

1988-01-01

technical manual for the U.S. Army. Contract types have run the gamut from firm fixed price to various forms of cost plus arrangements, and award has been...in a National Forest to producing a technical manual for the U.S. Army. Contract types have run the gamut from firm fixed price to various forms of

Teaching Technology with Technology. An Off-the-Shelf Robotics Course Builds Technical Center Enrollment.

ERIC Educational Resources Information Center

Hannemann, Jim; Rice, Thomas R.

1991-01-01

At the Oakland Technical Center, which provides vocational programs for nine Michigan high schools, a one-semester course in Foundations of Technology Systems uses a computer-simulated manufacturing environment to teach applied math, science, language arts, communication skills, problem solving, and teamwork in the context of technology education.…

Helping Doctoral Students Establish Long-Term Identities as Technical Communication Scholars

ERIC Educational Resources Information Center

Grant-Davie, Keith; Matheson, Breeanne; Stephens, Eric James

2017-01-01

This article aims to help doctoral students in technical communication prepare themselves for the academic job market and for the subsequent process of earning tenure and promotion in increasingly demanding environments. The authors propose that students do four things: (a) learn to spot and articulate research problems; (b) find their…

Technical and Non-Technical Programme Students' Attitudes and Reasons for Plagiarism

ERIC Educational Resources Information Center

Harji, Madhubala Bava; Ismail, Zalina; Chetty, Thiba Naraina; Letchumanan, Krishnaveni

2017-01-01

To date, plagiarism continues to be a widespread problem in higher education. Deemed to be endemic, researchers continue to examine various aspects of plagiarism, including students' perception, practices, attitudes and reasons for plagiarism, in addressing this growing concern. Most studies, however, tend to examine these aspects independently.…

Vocational-Technical Education; A Prospectus for Change.

ERIC Educational Resources Information Center

Schaefer, Carl J., Ed.; Kaufman, Jacob J., Ed.

To seek resolution of problems in providing education for youth and adults oriented toward the world of work, the Massachusetts Advisory Council on Education (MACE) undertook a study of vocational-technical education as a major project. This publication contains the major papers and prepared reactions to these papers, which were presented at a…

USRA/RIACS

NASA Technical Reports Server (NTRS)

Oliger, Joseph

1992-01-01

The Research Institute for Advanced Computer Science (RIACS) was established by the Universities Space Research Association (USRA) at the NASA Ames Research Center (ARC) on June 6, 1983. RIACS is privately operated by USRA, a consortium of universities with research programs in the aerospace sciences, under a cooperative agreement with NASA. The primary mission of RIACS is to provide research and expertise in computer science and scientific computing to support the scientific missions of NASA ARC. The research carried out at RIACS must change its emphasis from year to year in response to NASA ARC's changing needs and technological opportunities. A flexible scientific staff is provided through a university faculty visitor program, a post doctoral program, and a student visitor program. Not only does this provide appropriate expertise but it also introduces scientists outside of NASA to NASA problems. A small group of core RIACS staff provides continuity and interacts with an ARC technical monitor and scientific advisory group to determine the RIACS mission. RIACS activities are reviewed and monitored by a USRA advisory council and ARC technical monitor. Research at RIACS is currently being done in the following areas: (1) parallel computing; (2) advanced methods for scientific computing; (3) learning systems; (4) high performance networks and technology; and (5) graphics, visualization, and virtual environments. In the past year, parallel compiler techniques and adaptive numerical methods for flows in complicated geometries were identified as important problems to investigate for ARC's involvement in the Computational Grand Challenges of the next decade. We concluded a summer student visitors program during this six months. We had six visiting graduate students that worked on projects over the summer and presented seminars on their work at the conclusion of their visits. RIACS technical reports are usually preprints of manuscripts that have been submitted to research journals or conference proceedings. A list of these reports for the period July 1, 1992 through December 31, 1992 is provided.

TADS and Technical Assistance.

ERIC Educational Resources Information Center

Trohanis, Pascal L.

1983-01-01

Accomplishments of the Technical Assistance Development System (TADS) are cited, current challenges (including program development, and communication and coordination) are noted, and the mission mandated for TADS is outlined. (CL)

The most common problem facing by the maintenance department: A case Study between Universiti Tun Hussein Onn Malaysia (UTHM) and Universiti Teknologi Malaysia (UTM)

NASA Astrophysics Data System (ADS)

Norazam Yasin, Mohd; Mohamad Zin, Rosli; Halid Abdullah, Abd; Shafiq Mahmad, Muhammad; Fikri Hasmori, Muhammad

2017-11-01

From time to time, the maintenance works become more challenging due to construction of new building and also aging of the existing buildings. University buildings without any exception require proper maintenance services to support their function requirements and this can be considered as major responsibilities to be fulfilled by the maintenance department in the universities. Maintenance department specifically will face various kinds of problems in their operation works and thus this might influence the maintenance work operations itself. This study purposely to identify the common problem facing by the maintenance department and also to examine the current status of the maintenance department. In addition, this study would also propose any suitable approach that could be implemented to overcome the problem facing by the maintenance department. To achieve the objectives of this study, a combination of deep literature study and carrying out a survey is necessary. Literature study aimed to obtain deeper information about this study, meanwhile a survey aimed at identifying the common problem facing by the maintenance department and also to provide the information of the maintenance department’s organization. Several methods will be used in analyzing the data obtained through the survey, including Microsoft Office Excel and also using mean index formula. This study has identified three categories of problem in the maintenance department, which are management problems, human resource problem, and technical problems. Following the findings, several solutions being proposed which can be implemented as the solution to the problem facing. These suggestions have the potential to improve the maintenance department work efficiency, thus could help to increase the department productivity.

Radiological clinical trials: Proposal of a problem-finding questionnaire to improve study success.

PubMed

Valdora, Francesca; Bignotti, Bianca; Calabrese, Massimo; Houssami, Nehmat; Tagliafico, Alberto

2016-12-26

To develop a survey to help define the main problems in radiological clinical trials. Since 2006, we have managed seven different radiological clinical trials recruiting patients in academic and non-academic centres. We developed a preliminary questionnaire using a four-round Delphi approach to identify problems occurring in radiological clinical trials run at our centre. We investigated the recruitment experience, involvement of all multi-disciplinary team members and main obstacles to completing the projects. A final round of Delphi processes elucidated solutions to the identified problems. Among 19/20 (95%) respondents, 10 (53%) were young physicians (under 35 years old), and the respondents included non-faculty members, fellows, residents, and undergraduate students. Ninety-four percent (18/19) of respondents showed interest in conducting clinical trials. On a scale of 1 to 10, the problems with higher/worse scores (8-9) were related to technical or communication problems. The most frequent problems across all studies were technical problems related to clinical trial equipment, insufficient willingness to participate, obstacles to understanding the design of electronic-case report form and extra work. The developed questionnaire identified the main recurring problems in radiological clinical trials as perceived by end-users and helped define possible solutions that are mostly related to having dedicated clinical trial research staff.

Verification of Algebra Step Problems: A Chronometric Study of Human Problem Solving. Technical Report No. 253. Psychology and Education Series.

ERIC Educational Resources Information Center

Matthews, Paul G.; Atkinson, Richard C.

This paper reports an experiment designed to test theoretical relations among fast problem solving, more complex and slower problem solving, and research concerning fundamental memory processes. Using a cathode ray tube, subjects were presented with propositions of the form "Y is in list X" which they memorized. In later testing they were asked to…