How Can Magnetic Forces Do Work? Investigating the Problem with Students

ERIC Educational Resources Information Center

Onorato, Pasquale; De Ambrosis, Anna

2013-01-01

We present a sequence of activities aimed at promoting both learning about magnetic forces and students' reflection about the conceptual bridge between magnetic forces on a moving charge and on a current-carrying wire in a magnetic field. The activity sequence, designed for students in high school or on introductory physics courses, has been…

Magnetic field effects on the vestibular system: calculation of the pressure on the cupula due to ionic current-induced Lorentz force

NASA Astrophysics Data System (ADS)

Antunes, A.; Glover, P. M.; Li, Y.; Mian, O. S.; Day, B. L.

2012-07-01

Large static magnetic fields may be employed in magnetic resonance imaging (MRI). At high magnetic field strengths (usually from about 3 T and above) it is possible for humans to perceive a number of effects. One such effect is mild vertigo. Recently, Roberts et al (2011 Current Biology 21 1635-40) proposed a Lorentz-force mechanism resulting from the ionic currents occurring naturally in the endolymph of the vestibular system. In the present work a more detailed calculation of the forces and resulting pressures in the vestibular system is carried out using a numerical model. Firstly, realistic 3D finite element conductivity and fluid maps of the utricle and a single semi-circular canal containing the current sources (dark cells) and sinks (hair cells) of the utricle and ampulla were constructed. Secondly, the electrical current densities in the fluid are calculated. Thirdly, the developed Lorentz force is used directly in the Navier-Stokes equation and the trans-cupular pressure is computed. Since the driving force field is relatively large in comparison with the advective acceleration, we demonstrate that it is possible to perform an approximation in the Navier-Stokes equations that reduces the problem to solving a simpler Poisson equation. This simplification allows rapid and easy calculation for many different directions of applied magnetic field. At 7 T a maximum cupula pressure difference of 1.6 mPa was calculated for the combined ampullar (0.7 µA) and utricular (3.31 µA) distributed current sources, assuming a hair-cell resting current of 100 pA per unit. These pressure values are up to an order of magnitude lower than those proposed by Roberts et al using a simplistic model and calculation, and are in good agreement with the estimated pressure values for nystagmus velocities in caloric experiments. This modeling work supports the hypothesis that the Lorentz force mechanism is a significant contributor to the perception of magnetic field induced vertigo.

Tunneling mechanism and contact mechanics of colloidal nanoparticle assemblies.

PubMed

Biaye, Moussa; Zbydniewska, Ewa; Mélin, Thierry; Deresmes, Dominique; Copie, Guillaume; Cleri, Fabrizio; Sangeetha, Neralagatta; Decorde, Nicolas; Viallet, Benoit; Grisolia, Jérémie; Ressier, Laurence; Diesinger, Heinrich

2016-11-25

Nanoparticle assemblies with thiol-terminated alkyl chains are studied by conducting atomic force microscopy (c-AFM) regarding their use as strain gauges for touch-sensitive panels. Current-force spectroscopy is used as a characterization tool complementary to the macroscopic setup since it allows a bias to be applied to a limited number of junctions, overcoming the Coulomb blockade energy and focusing on the contact electromechanics and the transport mechanism across the ligand. First, transition voltage spectroscopy is applied with varying force to target the underlying tunneling mechanism by observing whether the transition between the ohmic and exponential current-voltage behavior is force-dependent. Secondly, current-force spectroscopy in the ohmic range below the transition voltage is performed. The current-force behavior of the AFM probe in contact with a nanoparticle multilayer is associated with the spread of force and current within the nanoparticle lattice and at the level of adjacent particles by detailed contact mechanics treatment. The result is twofold: concerning the architecture of sensors, this work is a sample case of contact electromechanics at scales ranging from the device scale down to the individual ligand molecule. Regarding transport across the molecule, the vacuum tunneling mechanism is favored over the conduction by coherent molecular states, which is a decision-making aid for the choice of ligand in applications.

Poultry Processing Work and Respiratory Health of Latino Men and Women in North Carolina

PubMed Central

Mirabelli, Maria C.; Chatterjee, Arjun B.; Arcury, Thomas A.; Mora, Dana C.; Blocker, Jill N.; Grzywacz, Joseph G.; Chen, Haiying; Marín, Antonio J.; Schulz, Mark R.; Quandt, Sara A.

2015-01-01

Objective To evaluate associations between poultry processing work and respiratory health among working Latino men and women in North Carolina. Methods Between May 2009 and November 2010, 402 poultry processing workers and 339 workers in a comparison population completed interviewer-administered questionnaires. Of these participants, 279 poultry processing workers and 222 workers in the comparison population also completed spirometry testing to provide measurements of forced expiratory volume in 1 second and forced vital capacity. Results Nine percent of poultry processing workers and 10% of workers in the comparison population reported current asthma. Relative to the comparison population, adjusted mean forced expiratory volume in 1 second and forced vital capacity were lower in the poultry processing population, particularly among men who reported sanitation job activities. Conclusions Despite the low prevalence of respiratory symptoms reported, poultry processing work may affect lung function. PMID:22237034

The role of biotic forces in driving macroevolution: beyond the Red Queen

PubMed Central

Voje, Kjetil L.; Holen, Øistein H.; Liow, Lee Hsiang; Stenseth, Nils Chr.

2015-01-01

A multitude of hypotheses claim that abiotic factors are the main drivers of macroevolutionary change. By contrast, Van Valen's Red Queen hypothesis is often put forward as the sole representative of the view that biotic forcing is the main evolutionary driver. This imbalance of hypotheses does not reflect our current knowledge: theoretical work demonstrates the plausibility of biotically driven long-term evolution, whereas empirical work suggests a central role for biotic forcing in macroevolution. We call for a more pluralistic view of how biotic forces may drive long-term evolution that is compatible with both phenotypic stasis in the fossil record and with non-constant extinction rates. Promising avenues of research include contrasting predictions from relevant theories within ecology and macroevolution, as well as embracing both abiotic and biotic proxies while modelling long-term evolutionary data. By fitting models describing hypotheses of biotically driven macroevolution to data, we could dissect their predictions and transcend beyond pattern description, possibly narrowing the divide between our current understanding of micro- and macroevolution. PMID:25948685

Understanding Work and Literacy: (E)merging Discourses at Work. Research into Practice Series Number 7.

ERIC Educational Resources Information Center

Castleton, Geraldine; Ovens, Carolyn; Ralston, Deborah

The nature and effects of current common understandings of the relationship between work and literacy were examined along with the typical design and objectives of workplace literacy programs for members of Australia's work force. Special attention was paid to the following topics: changing demands of work and literacy at work; discourses of…

Non-invasive current and voltage imaging techniques for integrated circuits using scanning probe microscopy. Final report, LDRD Project FY93 and FY94

DOE Office of Scientific and Technical Information (OSTI.GOV)

Campbell, A.N.; Cole, E.I. Jr.; Tangyunyong, Paiboon

This report describes the first practical, non-invasive technique for detecting and imaging currents internal to operating integrated circuits (ICs). This technique is based on magnetic force microscopy and was developed under Sandia National Laboratories` LDRD (Laboratory Directed Research and Development) program during FY 93 and FY 94. LDRD funds were also used to explore a related technique, charge force microscopy, for voltage probing of ICs. This report describes the technical work performed under this LDRD as well as the outcomes of the project in terms of publications and awards, intellectual property and licensing, synergistic work, potential future work, hiring ofmore » additional permanent staff, and benefits to DOE`s defense programs (DP).« less

Employee Involvement - White-Collar Work Force

DTIC Science & Technology

1993-01-01

a currently valid OMB control number. 1. REPORT DATE JAN 1993 2. REPORT TYPE N/A 3. DATES COVERED - 4. TITLE AND SUBTITLE Employee ...Involvement - White-Collar Work Force 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER 5e. TASK NUMBER...34Persons acting on behalf of the Maritime Administration" includes any employee , contractor, or subcontractor to the contractor of the Maritime

Educating for the Future.

ERIC Educational Resources Information Center

Carlisle, E. R.

1988-01-01

Recent economic data suggest that trends occurring in the U.S. and other global economies will force even greater changes upon our educational system. To help educators prepare students for tomorrow's work force, this article discusses and clarifies some current developments in technology, job and education requirements, and U.S. productivity…

75 FR 4402 - Task Force on Community Preventive Services

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-27

... interventions to reduce inequalities in health outcomes. Agenda items are subject to change as priorities... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Task Force on... scientific evidence and current expertise regarding essential public health and what works in the delivery of...

Three Dimensional Distribution of Sensitive Field and Stress Field Inversion of Force Sensitive Materials under Constant Current Excitation.

PubMed

Zhao, Shuanfeng; Liu, Min; Guo, Wei; Zhang, Chuanwei

2018-02-28

Force sensitive conductive composite materials are functional materials which can be used as the sensitive material of force sensors. However, the existing sensors only use one-dimensional electrical properties of force sensitive conductive materials. Even in tactile sensors, the measurement of contact pressure is achieved by large-scale arrays and the units of a large-scale array are also based on the one-dimensional electrical properties of force sensitive materials. The main contribution of this work is to study the three-dimensional electrical properties and the inversion method of three-dimensional stress field of a force sensitive material (conductive rubber), which pushes the application of force sensitive material from one dimensional to three-dimensional. First, the mathematical model of the conductive rubber current field distribution under a constant force is established by the effective medium theory, and the current field distribution model of conductive rubber with different geometry, conductive rubber content and conductive rubber relaxation parameters is deduced. Secondly, the inversion method of the three-dimensional stress field of conductive rubber is established, which provides a theoretical basis for the design of a new tactile sensor, three-dimensional stress field and space force based on force sensitive materials.

Measuring the multi-scale integration of mechanical forces during morphogenesis.

PubMed

Blanchard, Guy B; Adams, Richard J

2011-10-01

The elaborate changes in morphology of an organism during development are the result of mechanical contributions that are a mixture of those generated locally and those that influence from a distance. We would like to know how chemical and mechanical information is transmitted and transduced, how work is done to achieve robust morphogenesis and why it sometimes fails. We introduce a scheme for separating the influence of two classes of forces. Active intrinsic forces integrate up levels of scale to shape tissues. Counter-currently, extrinsic forces exert influence from higher levels downwards and feed back directly and indirectly upon the intrinsic behaviours. We identify the measurable signatures of different kinds of forces and identify the frontiers where work is most needed. Copyright © 2011 Elsevier Ltd. All rights reserved.

Review of Railgun Modeling Techniques: The Computation of Railgun Force and Other Key Factors

NASA Astrophysics Data System (ADS)

Eckert, Nathan James

Currently, railgun force modeling either uses the simple "railgun force equation" or finite element methods. It is proposed here that a middle ground exists that does not require the solution of partial differential equations, is more readily implemented than finite element methods, and is more accurate than the traditional force equation. To develop this method, it is necessary to examine the core railgun factors: power supply mechanisms, the distribution of current in the rails and in the projectile which slides between them (called the armature), the magnetic field created by the current flowing through these rails, the inductance gradient (a key factor in simplifying railgun analysis, referred to as L'), the resultant Lorentz force, and the heating which accompanies this action. Common power supply technologies are investigated, and the shape of their current pulses are modeled. The main causes of current concentration are described, and a rudimentary method for computing current distribution in solid rails and a rectangular armature is shown to have promising accuracy with respect to outside finite element results. The magnetic field is modeled with two methods using the Biot-Savart law, and generally good agreement is obtained with respect to finite element methods (5.8% error on average). To get this agreement, a factor of 2 is added to the original formulation after seeing a reliable offset with FEM results. Three inductance gradient calculations are assessed, and though all agree with FEM results, the Kerrisk method and a regression analysis method developed by Murugan et al. (referred to as the LRM here) perform the best. Six railgun force computation methods are investigated, including the traditional railgun force equation, an equation produced by Waindok and Piekielny, and four methods inspired by the work of Xu et al. Overall, good agreement between the models and outside data is found, but each model's accuracy varies significantly between comparisons. Lastly, an approximation of the temperature profile in railgun rails originally presented by McCorkle and Bahder is replicated. In total, this work describes railgun technology and moderately complex railgun modeling methods, but is inconclusive about the presence of a middle-ground modeling method.

Systems Analysis of Alternative Architectures for Riverine Warfare in 2010

DTIC Science & Technology

2006-12-01

propose system of systems improvements for the RF in 2010. With the RF currently working to establish a command structure, train and equip its forces...opposing force. Measures of performance such as time to first enemy detection and loss exchange ratio were collected from MANA. A detailed statistical

The American Work Force, 1992-2005. Historical Trends, 1950-92, and Current Uncertainties.

ERIC Educational Resources Information Center

Kutscher, Ronald E.

1993-01-01

Reviews the trends of the last four decades in terms of the labor force, economics, employment by industry, and employment by occupation. Considers uncertainties surrounding projections to 2005: end of the cold war, European unification, and the North American Free Trade Agreement. (SK)

Understanding Unemployment. "Understanding Economics" Series No. 1.

ERIC Educational Resources Information Center

Holt, Geoffrey

Devised for secondary school students, the booklet explains current employment trends, policies, and issues of Canada's labor market. The book is divided into three parts. Part I discusses the labor force in terms of supply and demand, the working age population, the labor force participation rate, total employment, unemployment, and seasonal…

The Effect of Twins on Critical Currents of High Tc Superconductors

DTIC Science & Technology

1989-01-01

particles to stick together due to electrostatic forces. To overcome this we have formed a slurry of the material in liquid nitrogen and flash...can use and the liquid convection tends to counteract the separation process. We have-now designed a magnetic track which particles will slide down with...Currents of High Tc Superconductors" - A.M. Campbell and M.F. Ashby The initial work on levitation forces and separation of superconducting powders has

Security Analysis of DTN Architecture and Bundle Protocol Specification for Space-Based Networks

NASA Technical Reports Server (NTRS)

Ivancic, William D.

2009-01-01

A Delay-Tolerant Network (DTN) Architecture (Request for Comment, RFC-4838) and Bundle Protocol Specification, RFC-5050, have been proposed for space and terrestrial networks. Additional security specifications have been provided via the Bundle Security Specification (currently a work in progress as an Internet Research Task Force internet-draft) and, for link-layer protocols applicable to Space networks, the Licklider Transport Protocol Security Extensions. This document provides a security analysis of the current DTN RFCs and proposed security related internet drafts with a focus on space-based communication networks, which is a rather restricted subset of DTN networks. Note, the original focus and motivation of DTN work was for the Interplanetary Internet . This document does not address general store-and-forward network overlays, just the current work being done by the Internet Research Task Force (IRTF) and the Consultative Committee for Space Data Systems (CCSDS) Space Internetworking Services Area (SIS) - DTN working group under the DTN and Bundle umbrellas. However, much of the analysis is relevant to general store-and-forward overlays.

Mapping the Iceberg. NALL Working Paper.

ERIC Educational Resources Information Center

Livingstone, David

A survey of 1,500 Canadian adults looked at the full range of adults' learning activities, including informal learning related to employment, community volunteer work, household work, and other general interest. Findings indicated those in the labor force, or expecting to be in soon, participated in informal learning related to current or…

Magnetic field effects on the vestibular system: calculation of the pressure on the cupula due to ionic current-induced Lorentz force.

PubMed

Antunes, A; Glover, P M; Li, Y; Mian, O S; Day, B L

2012-07-21

Large static magnetic fields may be employed in magnetic resonance imaging (MRI). At high magnetic field strengths (usually from about 3 T and above) it is possible for humans to perceive a number of effects. One such effect is mild vertigo. Recently, Roberts et al (2011 Current Biology 21 1635-40) proposed a Lorentz-force mechanism resulting from the ionic currents occurring naturally in the endolymph of the vestibular system. In the present work a more detailed calculation of the forces and resulting pressures in the vestibular system is carried out using a numerical model. Firstly, realistic 3D finite element conductivity and fluid maps of the utricle and a single semi-circular canal containing the current sources (dark cells) and sinks (hair cells) of the utricle and ampulla were constructed. Secondly, the electrical current densities in the fluid are calculated. Thirdly, the developed Lorentz force is used directly in the Navier-Stokes equation and the trans-cupular pressure is computed. Since the driving force field is relatively large in comparison with the advective acceleration, we demonstrate that it is possible to perform an approximation in the Navier-Stokes equations that reduces the problem to solving a simpler Poisson equation. This simplification allows rapid and easy calculation for many different directions of applied magnetic field. At 7 T a maximum cupula pressure difference of 1.6 mPa was calculated for the combined ampullar (0.7 µA) and utricular (3.31 µA) distributed current sources, assuming a hair-cell resting current of 100 pA per unit. These pressure values are up to an order of magnitude lower than those proposed by Roberts et al using a simplistic model and calculation, and are in good agreement with the estimated pressure values for nystagmus velocities in caloric experiments. This modeling work supports the hypothesis that the Lorentz force mechanism is a significant contributor to the perception of magnetic field induced vertigo.

Aging and the Work Force: Human Resource Strategies. An Information Paper Prepared for Use by the Special Committee on Aging. United States Senate, Ninety-Seventh Congress, Second Session.

ERIC Educational Resources Information Center

Congress of the U.S., Washington, DC. Senate Special Committee on Aging.

This information paper explores the need for age-neutral functional criteria in the human resources management system and the need for managers to review currently accepted employment policies. Population patterns, labor force profiles, and labor force projections are reviewed. The paper examines the effect of retirement policies and considers…

Research on key factors and their interaction effects of electromagnetic force of high-speed solenoid valve.

PubMed

Liu, Peng; Fan, Liyun; Hayat, Qaisar; Xu, De; Ma, Xiuzhen; Song, Enzhe

2014-01-01

Analysis consisting of numerical simulations along with lab experiments of interaction effects between key parameters on the electromagnetic force based on response surface methodology (RSM) has been also proposed to optimize the design of high-speed solenoid valve (HSV) and improve its performance. Numerical simulation model of HSV has been developed in Ansoft Maxwell environment and its accuracy has been validated through lab experiments. Effect of change of core structure, coil structure, armature structure, working air gap, and drive current on the electromagnetic force of HSV has been analyzed through simulation model and influence rules of various parameters on the electromagnetic force have been established. The response surface model of the electromagnetic force has been utilized to analyze the interaction effect between major parameters. It has been concluded that six interaction factors including working air gap with armature radius, drive current with armature thickness, coil turns with side pole radius, armature thickness with its radius, armature thickness with side pole radius, and armature radius with side pole radius have significant influence on the electromagnetic force. Optimal match values between coil turns and side pole radius; armature thickness and side pole radius; and armature radius and side pole radius have also been determined.

Research on Key Factors and Their Interaction Effects of Electromagnetic Force of High-Speed Solenoid Valve

PubMed Central

Fan, Liyun; Xu, De; Ma, Xiuzhen; Song, Enzhe

2014-01-01

Analysis consisting of numerical simulations along with lab experiments of interaction effects between key parameters on the electromagnetic force based on response surface methodology (RSM) has been also proposed to optimize the design of high-speed solenoid valve (HSV) and improve its performance. Numerical simulation model of HSV has been developed in Ansoft Maxwell environment and its accuracy has been validated through lab experiments. Effect of change of core structure, coil structure, armature structure, working air gap, and drive current on the electromagnetic force of HSV has been analyzed through simulation model and influence rules of various parameters on the electromagnetic force have been established. The response surface model of the electromagnetic force has been utilized to analyze the interaction effect between major parameters. It has been concluded that six interaction factors including working air gap with armature radius, drive current with armature thickness, coil turns with side pole radius, armature thickness with its radius, armature thickness with side pole radius, and armature radius with side pole radius have significant influence on the electromagnetic force. Optimal match values between coil turns and side pole radius; armature thickness and side pole radius; and armature radius and side pole radius have also been determined. PMID:25243217

The relationship between retirement life cycle changes and older men's labor force participation rates.

PubMed

Hayward, M D; Crimmins, E M; Wray, L A

1994-09-01

This study probes the utility of older men's labor force participation rates (LFPRs) as indicators of the work-to-retirement transition. Specific attention is directed at how shifts in the retirement life cycle are related to LFPRs. Based on Current Population Survey data for the 1970s, a life table modeling approach showed that LFPRs are relatively weak indicators of the work-to-retirement transition. This was demonstrated by the relative stability in older men's age profiles of LFPRs despite significant changes in the timing and "organization" of the work-to-retirement transition. The 1970s evidenced a contraction of the main career and the expansion of both post-retirement work activity and retirement, yet none of these changes substantially altered the age profiles of older men's labor force participation rates.

Driving reconnection in sheared magnetic configurations with forced fluctuations

NASA Astrophysics Data System (ADS)

Pongkitiwanichakul, Peera; Makwana, Kirit D.; Ruffolo, David

2018-02-01

We investigate reconnection of magnetic field lines in sheared magnetic field configurations due to fluctuations driven by random forcing by means of numerical simulations. The simulations are performed with an incompressible, pseudo-spectral magnetohydrodynamics code in 2D where we take thick, resistively decaying, current-sheet like sheared magnetic configurations which do not reconnect spontaneously. We describe and test the forcing that is introduced in the momentum equation to drive fluctuations. It is found that the forcing does not change the rate of decay; however, it adds and removes energy faster in the presence of the magnetic shear structure compared to when it has decayed away. We observe that such a forcing can induce magnetic reconnection due to field line wandering leading to the formation of magnetic islands and O-points. These reconnecting field lines spread out as the current sheet decays with time. A semi-empirical formula is derived which reasonably explains the formation and spread of O-points. We find that reconnection spreads faster with stronger forcing and longer correlation time of forcing, while the wavenumber of forcing does not have a significant effect. When the field line wandering becomes large enough, the neighboring current sheets with opposite polarity start interacting, and then the magnetic field is rapidly annihilated. This work is useful to understand how forced fluctuations can drive reconnection in large scale current structures in space and astrophysical plasmas that are not susceptible to reconnection.

Labor Force Experience and Earnings: Women with Children.

ERIC Educational Resources Information Center

Levine, Victor; Moock, Peter R.

1984-01-01

Examines the influence of child-related reductions in past hours worked on current wage rate of married women with children. The study reveals that differences in "intensity" of prior work experience account for half of the sex-related wage gap. (TE)

Assessing the Impact of the Work Environment on Training Transfer: An Investigation of the Air Force Acquisition Management Course

DTIC Science & Technology

2007-06-01

Hult et al., 2003); yet it is most often taken for granted or is simply not transferred for the benefit of the organization. The Air Force...budget increase of 7 percent over last year. Today , companies are spending $1,273 per learner on training, including staff salaries. These higher...with the business strategy to develop plans to ensure training is being efficiently transferred to the organization. Current Knowledge Current

Reduction-in-Force: Working Policies and Procedures.

ERIC Educational Resources Information Center

National Association of Secondary School Principals, Reston, VA.

The reduction-in-force (RIF) policies presented here are intended to represent the variety of approaches currently being used throughout the nation. They were obtained through inquiries to personnel in more than 100 U.S. school districts. They are presented to give principals and assistant principals information to allow them to play an…

Labor Force Participation Rates among Working-Age Individuals with Visual Impairments

ERIC Educational Resources Information Center

Kelly, Stacy M.

2013-01-01

The present study analyzes four consecutive years of monthly labor force participation rates reported by the Current Population Survey that included nationally representative samples of the general U.S. population and nationally representative samples of the U.S. population with specifically identified disabilities. Visual impairment is one of the…

Child Care and Development: Key Facts.

ERIC Educational Resources Information Center

Poersch, Nicole; And Others

This document presents national data on: (1) children, families, and working parents; (2) the importance of child care; (3) the current status of child care; and (4) funding for child care. Specifically, the report includes figures on: (1) parents in the labor force and children with parents in the labor force; (2) the familial, economic, social,…

Design of Feedforward Controller to Reduce Force Ripple for Linear Motor using Halbach Magnet Array with T Shape Magnet

NASA Astrophysics Data System (ADS)

Kim, Moojong; Kim, Jinyoung; Lee, Moon G.

Recently, in micro/nano fabrication equipments, linear motors are widely used as an actuator to position workpiece, machining tool and measurement head. To control them faster and more precise, the motor should have high actuating force and small force ripple. High actuating force enable us to more workpiece with high acceleration. Eventually, it may provide higher throughput. Force ripple gives detrimental effect on the precision and tracking performance of the equipments. In order to accomplish more precise motion, it is important to make lower the force ripple. Force ripple is categorized into cogging and mutual ripple. First is dependent on the shape of magnets and/or core. The second is not dependent on them but dependent on current commutation. In this work, coreless mover i.e. coil winding is applied to the linear motor to avoid the cogging ripple. Therefore, the mutual ripple is only considered to be minimized. Ideal Halbach magnet array has continuously varying magnetization. The THMA (Halbach magnet array with T shape magnets) is proposed to approximate the ideal one. The THMA can not produce ideal sinusoidal flux, therefore, the linear motor with THMA and sinusoidal commutation of current generates the mutual force ripple. In this paper, in order to compensate mutual force ripple by feedforward(FF) controller, we calculate the optimized commutation of input current. The ripple is lower than 1.17% of actuating force if the commutation current agree with the magnetic flux from THMA. The performance of feedforward(FF) controller is verified by experiment.

Associations of Sex Trafficking History with Recent Sexual Risk among HIV-Infected FSWs in India

PubMed Central

Saggurti, Niranjan; Cheng, Debbie M.; Decker, Michele R.; Coleman, Sharon M.; Bridden, Carly; Pardeshi, Manoj; Dasgupta, Anindita; Samet, Jeffrey H.; Raj, Anita

2014-01-01

History of forced or coerced sex work entry and/or sex work entry prior to age 18 (i.e., sex trafficking) relate to early HIV risk; whether such risk persists is unclear. The current study assessed associations of reported sex trafficking histories and recent sexual risk among adult HIV-infected female sex workers (FSWs; n = 211) in Mumbai, India. Approximately one-half reported entering sex work prior to age 18 (50.2 %) or being forced or coerced into sex work (41.7 %). Past 90-day unprotected transactional sex was more prevalent among FSWs entering as minors than those entering as adults (AOR 2.06); in contrast, being forced or coerced into sex work related to reduction in such risk for HIV transmission (AOR 0.45). Histories of each form of sex trafficking may relate differently to later HIV risk. Intervention with HIV-infected FSWs entering sex work as minors should be prioritized based on potential elevated risk of HIV transmission. PMID:23955657

Associations of sex trafficking history with recent sexual risk among HIV-infected FSWs in India.

PubMed

Silverman, Jay G; Saggurti, Niranjan; Cheng, Debbie M; Decker, Michele R; Coleman, Sharon M; Bridden, Carly; Pardeshi, Manoj; Dasgupta, Anindita; Samet, Jeffrey H; Raj, Anita

2014-03-01

History of forced or coerced sex work entry and/or sex work entry prior to age 18 (i.e., sex trafficking) relate to early HIV risk; whether such risk persists is unclear. The current study assessed associations of reported sex trafficking histories and recent sexual risk among adult HIV-infected female sex workers (FSWs; n = 211) in Mumbai, India. Approximately one-half reported entering sex work prior to age 18 (50.2 %) or being forced or coerced into sex work (41.7 %). Past 90-day unprotected transactional sex was more prevalent among FSWs entering as minors than those entering as adults (AOR 2.06); in contrast, being forced or coerced into sex work related to reduction in such risk for HIV transmission (AOR 0.45). Histories of each form of sex trafficking may relate differently to later HIV risk. Intervention with HIV-infected FSWs entering sex work as minors should be prioritized based on potential elevated risk of HIV transmission.

Bottom Up Succession Planning Works Better.

ERIC Educational Resources Information Center

Stevens, Paul

The majority of current succession planning practices reflect the viewpoint of only a linear career direction for ambitious people. They are based on the premise that competent people have and want only one career direction--an upwardly mobile one. In today's work force, however, a "bottom-up" process works better in succession planning. This…

Influence of boundary conditions on the hydrodynamic forces of an oscillating sphere

NASA Astrophysics Data System (ADS)

Mirauda, Domenica; Negri, Marco; Martinelli, Luca; Malavasi, Stefano

2018-06-01

The design of submerged structures in sea currents presents certain problems that are not only connected to the shape of the obstacle but also to the number of acting forces as well as the correct modelling of the structures dynamic response. Currently, the common approach is that of integrated numerical modelling, which considers the contribution of both current and structure. The reliability of such an approach is better verified with experimental tests performed on models of simple geometry. On the basis of these considerations, the present work analyses the hydrodynamic forces acting on a sphere, which is characterised by a low mass ratio and damping. The sphere is immersed in a free surface flow and can oscillate along the streamwise and transverse flow direction. It is located at three different positions inside the current: close to the channel bottom, near the free surface and in the middle, and equally distant from both the bottom and free surface. The obtained results for different boundaries and flow kinematic conditions show a relevant influence of the free surface on the hydrodynamic forces along both the streamwise and transverse flow directions.

Perspectives on the '90s. Outlook Report.

ERIC Educational Resources Information Center

Sadowske, P. Sue, Ed.; Adrian, Judith G., Ed.

This report on forces influencing the future is designed to define the challenges that lie ahead and to help individuals develop plans to meet these challenges. It is based on the work of a team of "environmental scanners" who reviewed media, books, and academic research and discussed current issues with a variety of people to explore forces at…

Issues and Recommendations: A Report of the Learning Disabilities Task Force on Definition, Criteria and Identification Procedures.

ERIC Educational Resources Information Center

Iowa State Dept. of Education, Des Moines. Bureau of Special Education.

The report, developed by a special Iowa task force, examined issues of definition, criteria, and identification procedures for learning disabilities as a point of departure for the examination of current practices affecting learning disabled students in Iowa. The committee's working definintion of learning disabilities is presented as a basis for…

Nature of the electromagnetic force between classical magnetic dipoles

NASA Astrophysics Data System (ADS)

Mansuripur, Masud

2017-09-01

The Lorentz force law of classical electrodynamics states that the force 𝑭𝑭 exerted by the magnetic induction 𝑩𝑩 on a particle of charge 𝑞𝑞 moving with velocity 𝑽𝑽 is given by 𝑭𝑭 = 𝑞𝑞𝑽𝑽 × 𝑩𝑩. Since this force is orthogonal to the direction of motion, the magnetic field is said to be incapable of performing mechanical work. Yet there is no denying that a permanent magnet can readily perform mechanical work by pushing/pulling on another permanent magnet or by attracting pieces of magnetizable material such as scrap iron or iron filings. We explain this apparent contradiction by examining the magnetic Lorentz force acting on an Amperian current loop, which is the model for a magnetic dipole. We then extend the discussion by analyzing the Einstein-Laub model of magnetic dipoles in the presence of external magnetic fields.

Coupling between Current and Dynamic Magnetization : from Domain Walls to Spin Waves

NASA Astrophysics Data System (ADS)

Lucassen, M. E.

2012-05-01

So far, we have derived some general expressions for domain-wall motion and the spin motive force. We have seen that the β parameter plays a large role in both subjects. In all chapters of this thesis, there is an emphasis on the determination of this parameter. We also know how to incorporate thermal fluctuations for rigid domain walls, as shown above. In Chapter 2, we study a different kind of fluctuations: shot noise. This noise is caused by the fact that an electric current consists of electrons, and therefore has fluctuations. In the process, we also compute transmission and reflection coefficients for a rigid domain wall, and from them the linear momentum transfer. More work on fluctuations is done in Chapter 3. Here, we consider a (extrinsically pinned) rigid domain wall under the influence of thermal fluctuations that induces a current via spin motive force. We compute how the resulting noise in the current is related to the β parameter. In Chapter 4 we look into in more detail into the spin motive forces from field driven domain walls. Using micro magnetic simulations, we compute the spin motive force due to vortex domain walls explicitly. As mentioned before, this gives qualitatively different results than for a rigid domain wall. The final subject in Chapter 5 is the application of the general expression for spin motive forces to magnons. Although this might seem to be unrelated to domain-wall motion, this calculation allows us to relate the β parameter to macroscopic transport coefficients. This work was supported by Stichting voor Fundamenteel Onderzoek der Materie (FOM), the Netherlands Organization for Scientific Research (NWO), and by the European Research Council (ERC) under the Seventh Framework Program (FP7).

Current sheet formation in a sheared force-free-magnetic field. [in sun

NASA Technical Reports Server (NTRS)

Wolfson, Richard

1989-01-01

This paper presents the results of a study showing how continuous shearing motion of magnetic footpoints in a tenuous, infinitely conducting plasma can lead to the development of current sheets, despite the absence of such sheets or even of neutral points in the initial state. The calculations discussed here verify the earlier suggestion by Low and Wolfson (1988) that extended current sheets should form due to the shearing of a force-free quadrupolar magnetic field. More generally, this work augments earlier studies suggesting that the appearance of discontinuities - current sheets - may be a necessary consequence of the topological invariance imposed on the magnetic field geometry of an ideal MHD system by virtue of its infinite conductivity. In the context of solar physics, the work shows how the gradual and continuous motion of magnetic footpoints at the solar photosphere may lead to the buildup of magnetic energy that can then be released explosively when finite conductivity effects become important and lead to the rapid dissipation of current sheets. Such energy release may be important in solar flares, coronal mass ejections, and other eruptive events.

Rite of Passage: The Crisis of Youth's Transition from School to Work.

ERIC Educational Resources Information Center

National Child Labor Committee, New York, NY.

Current high unemployment and underemployment for all youth, and particularly for youths from poor and minority families, led to this study on the crisis of youth's transition from school to work. The study was conducted in four phases: A review of the literature and interviews with work-force experts to identify issues and alternatives; an…

How Technology Changes Demands for Human Skills. OECD Education Working Papers, No. 45

ERIC Educational Resources Information Center

Levy, Frank

2010-01-01

This paper places the competencies to be measured by the OECD's Programme for the International Assessment of Adult Competencies (PIAAC) in the context of the technological developments which are reshaping the nature of the workplace and work in the 21st century. The largest technological force currently shaping work is the computer. Computers are…

Hearing Other Voices: A Critical Assessment of Popular Views on Literacy and Work.

ERIC Educational Resources Information Center

Hull, Glynda

Recent cognitive and historical research as well as the perspectives of workers can challenge the popular myths of literacy and work. It is believed that workers do not possess the necessary literacy skills for current and future jobs. Forecasters specify which groups will dominate the future work force--women, minorities, and immigrants. Since…

Living the reality of forced sex work: perspectives from young migrant women sex workers in northern Vietnam.

PubMed

Rushing, Rosanne; Watts, Charlotte; Rushing, Sharon

2005-01-01

Young women are often lured or forced into selling sex as a result of migrating from rural to urban areas to find work. In this setting, they are exposed to high-risk situations, which may leave them vulnerable to exploitation. Using interviews with young migrant women currently working as sex workers in northern Vietnam, we recorded the perspectives of their initiation into sex work and life as a sex worker. The study found that high levels of forced sex and sexual exploitation were experienced by the majority of the young women interviewed. The young women describe their entry into sex work, first sexual experience (intercourse), violence, and condom negotiation and use. Although access to health care was available, the young women perceived the stigma attached to sex work as a barrier to receiving health care, and thus, preferred health education and care from peers. Health education programs focusing on peer education and support are essential for protecting and empowering these young women. In addition, policies and programs must work toward effective strategies to protect young migrant women.

Electrochemical atomic force microscopy: In situ monitoring of electrochemical processes

NASA Astrophysics Data System (ADS)

Reggente, Melania; Passeri, Daniele; Rossi, Marco; Tamburri, Emanuela; Terranova, Maria Letizia

2017-08-01

The in-situ electrodeposition of polyaniline (PANI), one of the most attractive conducting polymers (CP), has been monitored performing electrochemical atomic force microscopy (EC-AFM) experiments. The electropolymerization of PANI on a Pt working electrode has been observed performing cyclic voltammetry experiments and controlling the evolution of current flowing through the electrode surface, together with a standard AFM image. The working principle and the potentialities of this emerging technique are briefly reviewed and factors limiting the studying of the in-situ electrosynthesis of organic compounds discussed.

Self-Paced Physics, Segments 28-31.

ERIC Educational Resources Information Center

New York Inst. of Tech., Old Westbury.

Four study segments of the Self-Paced Physics Course materials are presented in this sixth problems and solutions book used as a part of student course work. The subject matter is related to electric currents, current densities, resistances, Ohm's law, voltages, Joule heating, electromotive forces, single loop circuits, series and parallel…

Clinging to the Past: The Air Force’s War on Dual-Career Families

DTIC Science & Technology

2014-06-01

combines existing research on stress and work-family conflict with new primary research on current USAF dual-career families in the form of a case...incompatibilities between the Air Force family schema (conceptions of, and practices relating to, USAF families). The study combines existing research on stress ... Stress Pathways ..................................................... 74 Figure 5, Civilian Dual-Career Stress Pathways

Non-cooperative Brownian donkeys: A solvable 1D model

NASA Astrophysics Data System (ADS)

Jiménez de Cisneros, B.; Reimann, P.; Parrondo, J. M. R.

2003-12-01

A paradigmatic 1D model for Brownian motion in a spatially symmetric, periodic system is tackled analytically. Upon application of an external static force F the system's response is an average current which is positive for F < 0 and negative for F > 0 (absolute negative mobility). Under suitable conditions, the system approaches 100% efficiency when working against the external force F.

Body Size Changes of Royal Australian Air Force Aircrew: 1971 - 2005

DTIC Science & Technology

2009-08-01

International Airport (2004). Adam completed his Physiotherapy Degree in 2008 at the University of South Australia. Adam currently works as a physiotherapist...Australia (UniSA) School of Health Sciences student pool and personal contacts (e.g. friends, family and work colleagues). All subjects were fully informed

The "Bastardisation" of Teachers' Work

ERIC Educational Resources Information Center

Naidu, Sham

2011-01-01

Currently, there is a radical shift in the manner in which teachers are expected to perform their duties because of economic, social and political forces that are impacting on education. It is not uncommon to find teachers working within rigidly defined policies; being subject to accountability mechanisms; involved with processes associated with…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rich, B.L.

Measurements of beta and/or nonpenetrating exposure results is complicated and past techniques and capabilities have resulted in significant inaccuracies in recorded results. Current developments have resulted in increased capabilities which make the results more accurate and should result in less total exposure to the work force. Continued development of works in progress should provide equivalent future improvements.

Depression and Welfare Reform: From Barriers to Inclusion

ERIC Educational Resources Information Center

Lewis, Dan A.; Lee, Bong Joo; Altenbernd, Lisa M.

2006-01-01

The authors identify ways to facilitate work among current and recent welfare recipients with mental illness. Their analysis assesses the relationship between a particular mental illness, depression, and labor force involvement in a statewide sample of welfare recipients, identifies the factors that promote work for those with depression, and…

Social Work Continuing Education: Current Issues and Future Direction

ERIC Educational Resources Information Center

Kurzman, Paul A.

2016-01-01

Continuing education is arising as an area of rapid growth and increased attention in the social work profession. Conceptually, the impetus and focus are on the promotion of the principles of lifelong learning and professional replenishment; but pragmatically, the driving force has been the virtually universal requirement of continuing education…

A Statewide Analysis of RNs' Intention To Leave Their Position.

ERIC Educational Resources Information Center

Rambur, Betty; Palumbo, Mary Val; McIntosh, Barbara; Mongeon, Joan

2003-01-01

Secondary analysis of registered nurse work force data from Vermont (n=4,418, 85% response) identified predictors of intention to leave current position. Differences in intention vary by educational attainment, hours worked, gender, practice role, and practice activity. Improving retention will require increased attention to compensation,…

Counterbalance of cutting force for advanced milling operations

NASA Astrophysics Data System (ADS)

Tsai, Nan-Chyuan; Shih, Li-Wen; Lee, Rong-Mao

2010-05-01

The goal of this work is to concurrently counterbalance the dynamic cutting force and regulate the spindle position deviation under various milling conditions by integrating active magnetic bearing (AMB) technique, fuzzy logic algorithm and an adaptive self-tuning feedback loop. Since the dynamics of milling system is highly determined by a few operation conditions, such as speed of spindle, cut depth and feedrate, therefore the dynamic model for cutting process is more appropriate to be constructed by experiments, instead of using theoretical approach. The experimental data, either for idle or cutting, are utilized to establish the database of milling dynamics so that the system parameters can be on-line estimated by employing the proposed fuzzy logic algorithm as the cutting mission is engaged. Based on the estimated milling system model and preset operation conditions, i.e., spindle speed, cut depth and feedrate, the current cutting force can be numerically estimated. Once the current cutting force can be real-time estimated, the corresponding compensation force can be exerted by the equipped AMB to counterbalance the cutting force, in addition to the spindle position regulation by feedback of spindle position. On the other hand, for the magnetic force is nonlinear with respect to the applied electric current and air gap, the characteristics of the employed AMB is investigated also by experiments and a nonlinear mathematic model, in terms of air gap between spindle and electromagnetic pole and coil current, is developed. At the end, the experimental simulations on realistic milling are presented to verify the efficacy of the fuzzy controller for spindle position regulation and the capability of the dynamic cutting force counterbalance.

The Rise of Robots: The Military’s Use of Autonomous Lethal Force

DTIC Science & Technology

2015-02-17

AIR WAR COLLEGE AIR UNIVERSITY THE RISE OF ROBOTS: THE MILITARY’S USE OF AUTONOMOUS LETHAL FORCE by Christopher J. Spinelli, Lt Col...ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) Air War ...Christopher J. Spinelli is currently an Air War College student and was the former Commander of the 445th Flight Test Squadron at Edwards Air Force Base

Education for Tomorrow.

ERIC Educational Resources Information Center

Blackstone, Tessa

1983-01-01

Implications of current social and economic conditions in Britain for educational planning are considered and some recommendations made addressing problems of disadvantaged youth, women, the industrial work force, and the retired and unemployed. (MJL)

Work at older ages in Japan: variation by gender and employment status.

PubMed

Raymo, James M; Liang, Jersey; Sugisawa, Hidehiro; Kobayashi, Erika; Sugihara, Yoko

2004-05-01

This study describes the correlates of labor force participation among Japanese men and women aged 60-85 and examines differences by gender and employment status. Using four waves of data collected from a national sample of older Japanese between 1990 and 1999, we estimate multinomial logistic regression models for three measures of labor force participation (current labor force status, labor force exit, and labor force re-entry) as a function of individual and family characteristics measured 3 years earlier. Labor force participation is significantly associated with socioeconomic status, longest occupation, and family structure. The strength and nature of these relationships differ markedly for men and women and for wage employment and self-employment. The emphasis on life course experiences and work-family interdependence characterizing recent research on retirement in the United States is clearly relevant in Japan as well. To better understand later-life labor force participation in Japan, subsequent research should incorporate more direct measures of life course experiences and family relationships and attempt to make explicit cross-national comparisons of these relationships.

The Future of Work: Some Prospects and Perspectives. A Compilation.

ERIC Educational Resources Information Center

Cho, DaeYeon; Imel, Susan

The question of what the future of work in the United States will be is examined in this publication using current information on trends and issues related to work, the economy, and the labor force. The compilation intended to give an overview of selected aspects of the topic and provide information about other resources. In the first section,…

The nursing shortage: an update for occupational health nurses.

PubMed

Palmer, Carol

2003-12-01

Nursing is about to realize the worst shortage in history at the same time the first baby boomers are increasing the need for health care. A large component of the current and projected nursing shortage is the aging of the RN work force. Several factors contribute to the aging of the work force, including overall decline in nursing as a chosen profession, the increasing age of nursing graduates, and the aging of the existing RN work force. Job dissatisfaction has been a key issue contributing to the crisis related to recruitment and retention of nurses. Inadequate staffing, heavy workloads, flat salaries, and increased use of mandatory overtime are primary issues related to job dissatisfaction. Job dissatisfaction issues are key components of retention of nursing personnel. Occupational health nurses are experts in dealing with issues of ergonomic challenges, workplace violence, mandatory overtime, stress related injuries, and high stress associated with nursing.

The aging work force in Korea.

PubMed

Hong, Jungyeon; Lee, Kangsook

2012-04-01

Korea has the fastest aging population and least fertile population of all Organization Economic Cooperation and Development countries, and it is undertaking significant preparations for an aging society. So, we want to review the present status of Elderly workers' occupational disorders and preparations, which is performed by governmental, social parties. We examine the current status of Korea's aging work force, focusing on occupational disorders (injuries and diseases), and retirements, and the associated health effects. Despite the efforts and concern about Korea's aging society since the issue was first identified, Korea's limited experience in operating a national public pension system, and a mature social security system shows that the needs of Korea's aging society cannot be fully satisfied. This problem has already resulted in increasing labor employment rates and delays in retirement from the labor market. We suggest a policy for elderly workers considering various determinants that can lead to successful employment, retirement, and health promotion for the aging work force.

Current deformation in the Tibetan Plateau: a stress gauge in the large-scale India-Asia collision tectonics

NASA Astrophysics Data System (ADS)

Capitanio, F. A.

2017-12-01

The quantification of the exact tectonic forces budget on Earth has remained thus far elusive. Geodetic velocities provide relevant constraints on the current dynamics of the coupling between collision and continental tectonics, however in the Tibetan plateau these support contrasting, non-unique models. Here, we compare numerical models of coupled India-Asia plate convergence, collision and continent interiors tectonics to the geodetically-constrained motions in the Tibetan Plateau to provide a quantitative assessment of the driving forces of plate tectonics in the area. The models develop a range of long-term evolutions remarkably similar to the Asian tectonics in the Cenozoic, reproducing the current large-scale motions pattern under a range of conditions. Balancing the convergent margin forces, following subduction, and the far-field forcing along the trail of the subducting continent, the geodetic rates in the Tibetan Plateau can be matched. The comparisons support the discussion on the likely processes at work, allowing inferences on the drivers of plateau formation and its role on the plate margin-interiors tectonics. More in general, the outcomes highlight the unique role of the Tibetan Plateau as a pressure gauge for the tectonic forces on Earth.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pustovitov, V. D., E-mail: pustovitov-vd@nrcki.ru

The radial force balance in a tokamak during fast transient events with a duration much shorter than the resistive time of the vacuum vessel wall is analyzed. The aim of the work is to analytically estimate the resulting integral radial force on the wall. In contrast to the preceding study [Plasma Phys. Rep. 41, 952 (2015)], where a similar problem was considered for thermal quench, simultaneous changes in the profiles and values of the pressure and plasma current are allowed here. Thereby, the current quench and various methods of disruption mitigation used in the existing tokamaks and considered for futuremore » applications are also covered. General formulas for the force at an arbitrary sequence or combination of events are derived, and estimates for the standard tokamak model are made. The earlier results and conclusions are confirmed, and it is shown that, in the disruption mitigation scenarios accepted for ITER, the radial forces can be as high as in uncontrolled disruptions.« less

Effect of the tip state during qPlus noncontact atomic force microscopy of Si(100) at 5 K: Probing the probe

PubMed Central

Jarvis, Sam; Danza, Rosanna; Moriarty, Philip

2012-01-01

Summary Background: Noncontact atomic force microscopy (NC-AFM) now regularly produces atomic-resolution images on a wide range of surfaces, and has demonstrated the capability for atomic manipulation solely using chemical forces. Nonetheless, the role of the tip apex in both imaging and manipulation remains poorly understood and is an active area of research both experimentally and theoretically. Recent work employing specially functionalised tips has provided additional impetus to elucidating the role of the tip apex in the observed contrast. Results: We present an analysis of the influence of the tip apex during imaging of the Si(100) substrate in ultra-high vacuum (UHV) at 5 K using a qPlus sensor for noncontact atomic force microscopy (NC-AFM). Data demonstrating stable imaging with a range of tip apexes, each with a characteristic imaging signature, have been acquired. By imaging at close to zero applied bias we eliminate the influence of tunnel current on the force between tip and surface, and also the tunnel-current-induced excitation of silicon dimers, which is a key issue in scanning probe studies of Si(100). Conclusion: A wide range of novel imaging mechanisms are demonstrated on the Si(100) surface, which can only be explained by variations in the precise structural configuration at the apex of the tip. Such images provide a valuable resource for theoreticians working on the development of realistic tip structures for NC-AFM simulations. Force spectroscopy measurements show that the tip termination critically affects both the short-range force and dissipated energy. PMID:22428093

Critical Professional Issues in Labour Force Development for Teachers with Children up to Two Years of Age: A New Zealand Perspective

ERIC Educational Resources Information Center

Rockel, Jean

2014-01-01

This paper critically examines current concerns regarding professional issues in labour force development for teachers with children up to two years of age (UtoT). The concerns in New Zealand (NZ) relate to whether initial teacher-education (ITE) qualifications prepare teachers to work with children UtoT, involving synergy between ITE and the…

Model of vertical plasma motion during the current quench

NASA Astrophysics Data System (ADS)

Breizman, Boris; Kiramov, Dmitrii

2017-10-01

Tokamak disruptions impair plasma position control, which allows the plasma column to move and hit the wall. These detrimental events enhance thermal and mechanical loads due to halo currents and runaway electron losses. Their fundamental understanding and prevention is one of the high-priority items for ITER. As commonly observed in experiments, the disruptive plasma tends to move vertically, and the timescale of this motion is rather resistive than Alfvenic. These observations suggest that the plasma column is nearly force-free during its vertical motion. In fact, the force-free constraint is already used in disruption simulators. In this work, we consider a geometrically simple system that mimics the tokamak plasma surrounded by the conducting structures. Using this model, we highlight the underlying mechanism of the vertical displacement events during the current quench phase of plasma disruption. We also address a question of ideal MHD stability of the plasma during its resistive motion. Work supported by the U.S. Department of Energy Contracts DEFG02-04ER54742 and DE-SC0016283.

Vocational-Technical Education Today.

ERIC Educational Resources Information Center

American Vocational Association, Alexandria, VA.

Vocational-technical education (VTE) today encompasses a diverse array of programs to equip students with work and life skills. A widening skills gap in the nation's work force, coupled with the fact that only about 20% of the nation's current jobs require a four-year college degree, has made VTE more important than ever before. Research has…

75 FR 78676 - Proposed Information Collection; Comment Request; Current Population Survey (CPS) Basic...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-16

... age, marital status, gender, Armed Forces status, education, race, origin, and family income. We use... sponsor the basic monthly survey. The Census Bureau also prepares and conducts all the field work. At the.... Some of the information within that portion includes employment status, number of hours worked, job...

78 FR 77646 - Proposed Information Collection; Comment Request; Current Population Survey (CPS) Basic...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-24

... age, marital status, gender, Armed Forces status, education, race, origin, and family income. We use... sponsor the basic monthly survey. The Census Bureau also prepares and conducts all the field work. At the.... Some of the information within that portion includes employment status, number of hours worked, job...

Science accomplishments report.

Treesearch

Valerie Rapp

2003-01-01

Today, as in the past, complex forces of nature intersect with communities and society. Fire, climate change, invasive species, and large-scale shifts in forest cover and use are some of the key issues society currently faces. This accomplishment report encapsulates a year’s work from our scientists. This work is often interdisciplinary, long term, geographically broad...

Piezo-Electrochemical Energy Harvesting with Lithium-Intercalating Carbon Fibers.

PubMed

Jacques, Eric; Lindbergh, Göran; Zenkert, Dan; Leijonmarck, Simon; Kjell, Maria Hellqvist

2015-07-01

The mechanical and electrochemical properties are coupled through a piezo-electrochemical effect in Li-intercalated carbon fibers. It is demonstrated that this piezo-electrochemical effect makes it possible to harvest electrical energy from mechanical work. Continuous polyacrylonitrile-based carbon fibers that can work both as electrodes for Li-ion batteries and structural reinforcement for composites materials are used in this study. Applying a tensile force to carbon fiber bundles used as Li-intercalating electrodes results in a response of the electrode potential of a few millivolts which allows, at low current densities, lithiation at higher electrode potential than delithiation. More electrical energy is thereby released from the cell at discharge than provided at charge, harvesting energy from the mechanical work of the applied force. The measured harvested specific electrical power is in the order of 1 μW/g for current densities in the order of 1 mA/g, but this has a potential of being increased significantly.

Issues in Education and Training for Working Women. Worker Education and Training Policies Project and National Commisssion on Working Women.

ERIC Educational Resources Information Center

Wilder, Denise

This paper reviews and summarizes the current and projected status of education and employment, and their relatedness, for working women, and suggests avenues for improvement. It examines women's increasing role in the labor force and the social, economic, and demographic trends and projections relevant to that role. In evaluating the impact on…

Development of electromagnetic welding facility of flat plates for nuclear industry

NASA Astrophysics Data System (ADS)

Kumar, Rajesh; Sahoo, Subhanarayan; Sarkar, Biswanath; Shyam, Anurag

2017-04-01

Electromagnetic pulse welding (EMPW) process, one of high speed welding process uses electromagnetic force from discharged current through working coil, which develops a repulsive force between the induced current flowing parallel and in opposite direction. For achieving the successful weldment using this process the design of working coil is the most important factor due to high magnetic field on surface of work piece. In case of high quality flat plate welding factors such as impact velocity, angle of impact standoff distance, thickness of flyer and overlap length have to be chosen carefully. EMPW has wide applications in nuclear industry, automotive industry, aerospace, electrical industries. However formability and weldability still remain major issues. Due to ease in controlling the magnetic field enveloped inside tubes, the EMPW has been widely used for tube welding. In case of flat components control of magnetic field is difficult. Hence the application of EMPW gets restricted. The present work attempts to make a novel contribution by investigating the effect of process parameters on welding quality of flat plates. The work emphasizes the approaches and engineering calculations required to effectively use of actuator in EMPW of flat components.

[Medical support of Russian Armed Forces: the results and perspectives].

PubMed

Shappo, V V

2008-01-01

The results of work of the Russian Federation Armed Forces medical service obtained in 2007 were summarized and the main problems of its activities in the current year and the very near future were determined. So the work at defining medical support as a type of Army and Navy support was began. The most important task of medical service in 2008 is realization of the Armed Forces medical support conception and goal-oriented program "The improvement of Russian Federation Armed Forces medical support in 2008-2012", the formation of two-level system of personnel's medical support. During the task realization the medical units and institutions are reorganized into federal state institutions. The RF DM Main Military Medical Headquarters works at significant improvement of war and military service veterans' medical attendance. The departmental program "Development of material and technical basis of military medical institutions for 2001-2010" is successfully realized. The measures to optimize the assignment of graduates from military medical higher schools are carried out. The tasks to improve the research work were outlined. The new principles of organization of military medical service control and work will be based on centralization of planning and decentralization of decision implementation, the possibility of military medical units to carry it out taking into account the common intention, safe feedback in order to make the work of army and navy medical specialists more effective in any conditions.

Civilization and Contemporary Social Theory: Alternative Approaches to Armed Forces and Society

DTIC Science & Technology

1988-01-01

civilianization theory is based on selective images of military strength in the past and moral weakness in the present. In the final section, emerging...modern form. The competing views on armed forces and society in the current literature are based on the lines drawn in these works. 5...civilian adminis- trators and civilian leaders" (1960:9), a broadening and increasingly representative recruitment base among officers, a

Labour Market Outcomes of Vocational Education in Europe: Evidence from the European Union Labour Force Survey. Research Paper No 32

ERIC Educational Resources Information Center

Cedefop - European Centre for the Development of Vocational Training, 2013

2013-01-01

This report focuses on the outcomes of vocational education and, in particular, on the transition from education to work in the current employment situation for young adults in the European Union. Using anonymised microdata from the EU labour force survey 2009 ad hoc module, this is one of the first studies to undertake a large cross-country…

A History of Art Education: Intellectual and Social Currents in Teaching the Visual Arts.

ERIC Educational Resources Information Center

Efland, Arthur D.

This book examines the historic developments of art education in the context of general educational trends and currents of social forces. The work is divided into 8 chapters. Chapter 1, "Art Education: Its Social Context", sets the philosophic basis for the book. Chapter 2, "Western Origins of Art Education", surveys…

White Collar Work: Career Ambitions of Fiji Final Year School Students

ERIC Educational Resources Information Center

Nilan, Pam; Cavu, Paula; Tagicakiverata, Isimeli; Hazelman, Emily

2006-01-01

The career ambitions of 1012 pupils in the final years of secondary schooling in Fiji were surveyed. The range of careers they nominated was very narrow, with teaching, nursing and other white collar work in the majority of responses. This stands in somewhat stark contrast to projected labour force needs, and the current serious shortage of…

The Role of the School District toward Preparing Students for the 21st Century

ERIC Educational Resources Information Center

Aguilar-Torres, Gloria

2010-01-01

This dissertation reflects the outcomes of a small school district that is successfully incorporating 21st century skills with the demands set forth by our current educational policy, No Child Left Behind. Considerations regarding globalization, future work force and work skills, definition of 21st century skills, supporting 21st century skills in…

Numerical simulation for the magnetic force distribution in electromagnetic forming of small size flat sheet

NASA Astrophysics Data System (ADS)

Chen, Xiaowei; Wang, Wenping; Wan, Min

2013-12-01

It is essential to calculate magnetic force in the process of studying electromagnetic flat sheet forming. Calculating magnetic force is the basis of analyzing the sheet deformation and optimizing technical parameters. Magnetic force distribution on the sheet can be obtained by numerical simulation of electromagnetic field. In contrast to other computing methods, the method of numerical simulation has some significant advantages, such as higher calculation accuracy, easier using and other advantages. In this paper, in order to study of magnetic force distribution on the small size flat sheet in electromagnetic forming when flat round spiral coil, flat rectangular spiral coil and uniform pressure coil are adopted, the 3D finite element models are established by software ANSYS/EMAG. The magnetic force distribution on the sheet are analyzed when the plane geometries of sheet are equal or less than the coil geometries under fixed discharge impulse. The results showed that when the physical dimensions of sheet are less than the corresponding dimensions of the coil, the variation of induced current channel width on the sheet will cause induced current crowding effect that seriously influence the magnetic force distribution, and the degree of inhomogeneity of magnetic force distribution is increase nearly linearly with the variation of induced current channel width; the small size uniform pressure coil will produce approximately uniform magnetic force distribution on the sheet, but the coil is easy to early failure; the desirable magnetic force distribution can be achieved when the unilateral placed flat rectangular spiral coil is adopted, and this program can be take as preferred one, because the longevity of flat rectangular spiral coil is longer than the working life of small size uniform pressure coil.

Mathematical modelling and numerical simulation of forces in milling process

NASA Astrophysics Data System (ADS)

Turai, Bhanu Murthy; Satish, Cherukuvada; Prakash Marimuthu, K.

2018-04-01

Machining of the material by milling induces forces, which act on the work piece material, tool and which in turn act on the machining tool. The forces involved in milling process can be quantified, mathematical models help to predict these forces. A lot of research has been carried out in this area in the past few decades. The current research aims at developing a mathematical model to predict forces at different levels which arise machining of Aluminium6061 alloy. Finite element analysis was used to develop a FE model to predict the cutting forces. Simulation was done for varying cutting conditions. Different experiments was designed using Taguchi method. A L9 orthogonal array was designed and the output was measure for the different experiments. The same was used to develop the mathematical model.

Respiratory Morbidity in a Coffee Processing Workplace With Sentinel Obliterative Bronchiolitis Cases

PubMed Central

Bailey, Rachel L.; Cox-Ganser, Jean M.; Duling, Matthew G.; LeBouf, Ryan F.; Martin, Stephen B.; Bledsoe, Toni A.; Green, Brett J.; Kreiss, Kathleen

2016-01-01

Rationale Obliterative bronchiolitis in former coffee workers prompted a cross-sectional study of current workers. Diacetyl and 2,3-pentanedione levels were highest in areas for flavoring and grinding/packaging unflavored coffee. Methods We interviewed 75 (88%) workers, measured lung function, and created exposure groups based on work history. We calculated standardized morbidity ratios (SMRs) for symptoms and spirometric abnormalities. We examined health outcomes by exposure groups. Results SMRs were elevated 1.6-fold for dyspnea and 2.7-fold for obstruction. The exposure group working in both coffee flavoring and grinding/packaging of unflavored coffee areas had significantly lower mean ratio of forced expiratory volume in 1 s to forced vital capacity and percent predicted mid-expiratory flow than workers without such exposure. Conclusion Current workers have occupational lung morbidity associated with high diacetyl and 2,3-pentanedione exposures, which were not limited to flavoring areas. PMID:26523478

Probing local work function of electron emitting Si-nanofacets

NASA Astrophysics Data System (ADS)

Basu, Tanmoy; Som, Tapobrata

2017-10-01

Large area, Si-nanofacets are synthesized by obliquely incident low energy Ar+-ion-beam bombardment at room temperature (RT). The field emission properties of such nanofacets are studied based on current-voltage measurements and the Fowler-Nordheim equation. Low turn-on field with relatively high current density is obtained due to the shape and an overall rough morphology. We demonstrate a tunable field emission property from the silicon nanofacets by varying the ion exposure time. Atomic force microscopy (AFM) in conjunction with Kelvin probe force microscopy (KPFM) measurements provide the information on the aspect ratio and confirms the presence of native oxide layer near the apexes of the facets, respectively. The inhomogeneous oxidation leads to an increase in the local work function at the apexes of the facets, restricting the electron emission from the same. Due to its room temperature fabrication, the present method is of great significance to the low-cost vacuum field emission devices fabrication.

Vertical and Horizontal Forces: A Framework for Understanding Airpower Command and Control

DTIC Science & Technology

2014-05-22

failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THE ...ABSTRACT The Air Force has long maintained the tenet of “centralized control , decentralized execution.” Changes in the contextual environment and...help commanders understand how command and control (C2) systems work best today. The proposed cognitive framework moves beyond centralization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, Barton; Schultz, Richard

The results of this project are best described by the papers and dissertations that resulted from the work. They are included in their entirety in this document. They are: (1) Jeff Harris PhD dissertation (focused mainly on forced convection); (2) Blake Lance PhD dissertation (focused mainly on mixed and transient convection). This dissertation is in multi-paper format and includes the article currently submitted and one to be submitted shortly; and, (3) JFE paper on CFD Validation Benchmark for Forced Convection.

Atomic force microscopy as a tool to study Xenopus laevis embryo

NASA Astrophysics Data System (ADS)

Pukhlyakova, E. A.; Efremov, Yu M.; Bagrov, D. V.; Luchinskaya, N. N.; Kiryukhin, D. O.; Belousov, L. V.; Shaitan, K. V.

2012-02-01

Atomic force microscopy (AFM) has become a powerful tool for imaging biological structures (from single molecules to living cells) and carrying out measurements of their mechanical properties. AFM provides three-dimensional high-resolution images of the studied biological objects in physiological environment. However there are only few AFM investigations of fresh tissue explants and virtually no such research on a whole organism, since most researchers work with cell cultures. In the current work AFM was used to observe the surface of living and fixed embryos and to measure mechanical properties of naive embryos and embryos with overexpression of guanine nucleotide-binding protein G-alpha-13.

The new Andean Regional Office of Astronomy for Development

NASA Astrophysics Data System (ADS)

Char, Farid; Forero-Romero, Jaime

2016-10-01

The Andean Regional Office of Astronomy for Development (ROAD) is a new effort in South America to serve several goals in astronomical development. The six countries in the Andean ROAD (Bolivia, Colombia, Chile, Ecuador, Peru and Venezuela) represent a common language block in the region. They work together to develop strategies to strengthen the professional research, education and popularization of astronomy. Our current Working Structure comprises a ROAD Coordinator and one Coordinators in each Task Force. Here we describe the main points of the ROAD's current action plan.

Analog and numerical experiments investigating force chain influences on bed conditions in granular flows

NASA Astrophysics Data System (ADS)

Estep, J.; Dufek, J.

2013-12-01

Granular flows are fundamental processes in several terrestrial and planetary natural events; including surficial flows on volcanic edifices, debris flows, landslides, dune formation, rock falls, sector collapses, and avalanches. Often granular flows can be two-phase, whereby interstitial fluids occupy void space within the particulates. The mobility of granular flows has received significant attention, however the physics that govern their internal behavior remain poorly understood. Here we extend upon previous research showing that force chains can transmit extreme localized forces to the substrates of free surface granular flows, and we combine experimental and computational approaches to further investigate the forces at the bed of simplified granular flows. Analog experiments resolve discrete bed forces via a photoelastic technique, while numerical experiments validate laboratory tests using discrete element model (DEM) simulations. The current work investigates (1) the role of distributed grain sizes on force transmission via force chains, and (2) how the inclusion of interstitial fluids effects force chain development. We also include 3D numerical simulations to apply observed 2D characteristics into real world perspective, and ascertain if the added dimension alters force chain behavior. Previous research showed that bed forces generated by force chain structures can transiently greatly exceed (by several 100%) the bed forces predicted from continuum approaches, and that natural materials are more prone to excessive bed forces than photoelastic materials due to their larger contact stiffnesses. This work suggests that force chain activity may play an important role in the bed physics of dense granular flows by influencing substrate entrainment. Photoelastic experiment image showing force chains in gravity driven granular flow.

Current Approaches to the Assessment of Graphic Design in a Higher Education Context

ERIC Educational Resources Information Center

Giloi, Susan; du Toit, Pieter

2013-01-01

This article provides an overview of the current trends in assessment practice within the field of graphic design. The demands placed on educators to apply sound assessment practice for Higher Education subjects is as intense in the field of graphic design as in any other. Forcing the assessment of creative visual work into existing assessment…

NON-NEUTRALIZED ELECTRIC CURRENT PATTERNS IN SOLAR ACTIVE REGIONS: ORIGIN OF THE SHEAR-GENERATING LORENTZ FORCE

DOE Office of Scientific and Technical Information (OSTI.GOV)

Georgoulis, Manolis K.; Titov, Viacheslav S.; Mikic, Zoran

Using solar vector magnetograms of the highest available spatial resolution and signal-to-noise ratio, we perform a detailed study of electric current patterns in two solar active regions (ARs): a flaring/eruptive and a flare-quiet one. We aim to determine whether ARs inject non-neutralized (net) electric currents in the solar atmosphere, responding to a debate initiated nearly two decades ago that remains inconclusive. We find that well-formed, intense magnetic polarity inversion lines (PILs) within ARs are the only photospheric magnetic structures that support significant net current. More intense PILs seem to imply stronger non-neutralized current patterns per polarity. This finding revises previousmore » works that claim frequent injections of intense non-neutralized currents by most ARs appearing in the solar disk but also works that altogether rule out injection of non-neutralized currents. In agreement with previous studies, we also find that magnetically isolated ARs remain globally current-balanced. In addition, we confirm and quantify the preference of a given magnetic polarity to follow a given sense of electric currents, indicating a dominant sense of twist in ARs. This coherence effect is more pronounced in more compact ARs with stronger PILs and must be of sub-photospheric origin. Our results yield a natural explanation of the Lorentz force, invariably generating velocity and magnetic shear along strong PILs, thus setting a physical context for the observed pre-eruption evolution in solar ARs.« less

Toward a Work-Force Analysis of the School Library Media Professional.

ERIC Educational Resources Information Center

Heim, Kathleen M.

1981-01-01

Summarizes general demographic and salary data to focus on entry levels, the current employment universe of school librarians, and the salary data for building-level librarians in 1979-80. More than 27 references are listed. (RAA)

Efficient molecular dynamics simulations with many-body potentials on graphics processing units

NASA Astrophysics Data System (ADS)

Fan, Zheyong; Chen, Wei; Vierimaa, Ville; Harju, Ari

2017-09-01

Graphics processing units have been extensively used to accelerate classical molecular dynamics simulations. However, there is much less progress on the acceleration of force evaluations for many-body potentials compared to pairwise ones. In the conventional force evaluation algorithm for many-body potentials, the force, virial stress, and heat current for a given atom are accumulated within different loops, which could result in write conflict between different threads in a CUDA kernel. In this work, we provide a new force evaluation algorithm, which is based on an explicit pairwise force expression for many-body potentials derived recently (Fan et al., 2015). In our algorithm, the force, virial stress, and heat current for a given atom can be accumulated within a single thread and is free of write conflicts. We discuss the formulations and algorithms and evaluate their performance. A new open-source code, GPUMD, is developed based on the proposed formulations. For the Tersoff many-body potential, the double precision performance of GPUMD using a Tesla K40 card is equivalent to that of the LAMMPS (Large-scale Atomic/Molecular Massively Parallel Simulator) molecular dynamics code running with about 100 CPU cores (Intel Xeon CPU X5670 @ 2.93 GHz).

Effect of Coriolis force on counter-current chromatographic separation by centrifugal partition chromatography.

PubMed

Ikehata, Jun-Ichi; Shinomiya, Kazufusa; Kobayashi, Koji; Ohshima, Hisashi; Kitanaka, Susumu; Ito, Yoichiro

2004-02-06

The effect of Coriolis force on the counter-current chromatographic separation was studied using centrifugal partition chromatography (CPC) with four different two-phase solvent systems including n-hexane-acetonitrile (ACN); tert-butyl methyl ether (MtBE)-aqueous 0.1% trifluoroacetic acid (TFA) (1:1); MtBE-ACN-aqueous 0.1% TFA (2:2:3); and 12.5% (w/w) polyethylene glycol (PEG) 1000-12.5% (w/w) dibasic potassium phosphate. Each separation was performed by eluting either the upper phase in the ascending mode or the lower phase in the descending mode, each in clockwise (CW) and counterclockwise column rotation. Better partition efficiencies were attained by the CW rotation in both mobile phases in all the two-phase solvent systems examined. The mathematical analysis also revealed the Coriolis force works favorably under the CW column rotation for both mobile phases. The overall results demonstrated that the Coriolis force produces substantial effects on CPC separation in both organic-aqueous and aqueous-aqueous two-phase systems.

Preventing Obsolescence through Retraining: Contexts, Policies, and Programs. Information Series No. 322.

ERIC Educational Resources Information Center

Gordus, Jeanne Prial; And Others

This report addresses the degree to which retraining has met the challenge of ensuring that the American work force has adequate skills to cope with the changing world of work. Chapter 1 sketches economic, social, and technological changes that help explain why the current reactive approach needs to be more active. In chapter 2, the extensiveness…

The New Victors: A Progressive Policy Analysis of Work Reform for People with Very Severe Handicaps.

ERIC Educational Resources Information Center

Ferguson, Dianne L.; Ferguson, Philip M.

1986-01-01

Current efforts to reform vocational services for severely disabled adults are examined in the context of past reform efforts, the meaning of work, and the status of the labor force. Proposed solutions should avoid exclusion of the severely disabled due to reliance on economic utility as the price of social integration. (Author/DB)

Gaining Control of Occupational Injury and Illness in the U.S. Navy Civilian Work Force

DTIC Science & Technology

1990-01-16

developing survey instruments, interviews were conducted with key participants at the naval shipyards, naval public works center, naval air repair...currently in place at naval shipyards. After compiling data on those processes, NAVCAMPRO was developed in an effort to take control of the management of...physician. The attending physician participates with the physical therapist and supervisor in the development of a work -hardening program for the

Design and implementation of a novel modal space active force control concept for spatial multi-DOF parallel robotic manipulators actuated by electrical actuators.

PubMed

Yang, Chifu; Zhao, Jinsong; Li, Liyi; Agrawal, Sunil K

2018-01-01

Robotic spine brace based on parallel-actuated robotic system is a new device for treatment and sensing of scoliosis, however, the strong dynamic coupling and anisotropy problem of parallel manipulators result in accuracy loss of rehabilitation force control, including big error in direction and value of force. A novel active force control strategy named modal space force control is proposed to solve these problems. Considering the electrical driven system and contact environment, the mathematical model of spatial parallel manipulator is built. The strong dynamic coupling problem in force field is described via experiments as well as the anisotropy problem of work space of parallel manipulators. The effects of dynamic coupling on control design and performances are discussed, and the influences of anisotropy on accuracy are also addressed. With mass/inertia matrix and stiffness matrix of parallel manipulators, a modal matrix can be calculated by using eigenvalue decomposition. Making use of the orthogonality of modal matrix with mass matrix of parallel manipulators, the strong coupled dynamic equations expressed in work space or joint space of parallel manipulator may be transformed into decoupled equations formulated in modal space. According to this property, each force control channel is independent of others in the modal space, thus we proposed modal space force control concept which means the force controller is designed in modal space. A modal space active force control is designed and implemented with only a simple PID controller employed as exampled control method to show the differences, uniqueness, and benefits of modal space force control. Simulation and experimental results show that the proposed modal space force control concept can effectively overcome the effects of the strong dynamic coupling and anisotropy problem in the physical space, and modal space force control is thus a very useful control framework, which is better than the current joint space control and work space control. Copyright © 2017 ISA. Published by Elsevier Ltd. All rights reserved.

Observation of linear I-V curves on vertical GaAs nanowires with atomic force microscope

NASA Astrophysics Data System (ADS)

Geydt, P.; Alekseev, P. A.; Dunaevskiy, M.; Lähderanta, E.; Haggrén, T.; Kakko, J.-P.; Lipsanen, H.

2015-12-01

In this work we demonstrate the possibility of studying the current-voltage characteristics for single vertically standing semiconductor nanowires on standard AFM equipped by current measuring module in PeakForce Tapping mode. On the basis of research of eight different samples of p-doped GaAs nanowires grown on different GaAs substrates, peculiar electrical effects were revealed. It was found how covering of substrate surface by SiOx layer increases the current, as well as phosphorous passivation of the grown nanowires. Elimination of the Schottky barrier between golden cap and the top parts of nanowires was observed. It was additionally studied that charge accumulation on the shell of single nanowires affects its resistivity and causes the hysteresis loops on I-V curves.

On the Loop Current Penetration into the Gulf of Mexico

NASA Astrophysics Data System (ADS)

Weisberg, Robert H.; Liu, Yonggang

2017-12-01

The Gulf of Mexico Loop Current generally intrudes some distance into the Gulf of Mexico before shedding an anticyclonic eddy and retreating back to its more direct entry to exit pathway. The control of this aperiodic process remains only partially known. Here we describe the evolution of the Loop Current throughout the era of satellite altimetry, and offer a mechanistic hypothesis on Loop Current intrusion. As a complement to the known effects of Loop Current forcing on the west Florida shelf circulation, we argue that the west Florida shelf, in turn, impacts the Loop Current evolution. A Self-Organizing Map analysis shows that anomalous northward penetrations of the Loop Current into the Gulf of Mexico occur when the eastern side of Loop Current is positioned west from the southwest corner of the west Florida shelf, whereas the more direct inflow to outflow route occurs when the eastern side of the Loop Current comes in contact with the southwest corner of the west Florida shelf. In essence, we argue that the west Florida shelf anchors the Loop Current in its direct path configuration and that farther northward penetration into the Gulf of Mexico occurs when such anchoring is released. To test of this hypothesis heuristically, we estimate that the dissipation and buoyancy work due to known Loop Current forcing of the west Florida shelf circulation (when in contact with the southwest corner) may exceed the pressure work required for the Loop Current to advance against the ambient Gulf of Mexico fluid.