Acquisition of flat panel displays for military applications

NASA Astrophysics Data System (ADS)

Van Atta, Richard H.; Goodell, Larry; Cohen, Brian S.; Lippitz, Michael J.; Marks, Michael B.; Bardsley, James N.; Kimzey, Charles H.

1998-09-01

Congress requested the Department of Defense (DoD) to study the acquisition of flat panel displays (FPDs) for military applications with specific attention to tradeoffs made in acquiring 'consumer-grade displays' rather than 'FPD systems that are custom designed to meet military requirements.' The study addresses: life cycle cost and performance tradeoffs, environmental and performance requirements and test data on performance of both custom and consumer-grade FPDs, life cycle cost and support issues such as commonality, supportability, and availability, potential benefits of FPD system interface standards and open systems approaches. The study found that appropriately ruggedized consumer-grade FPDs can meet the environmental and performance requirements for a broad range of military applications, including shipboard, command and control, army ground vehicles, military transport aviation, and soldier-portable computer systems. Currently, ruggedized consumer-grade FPDs cannot meet the specifications for some highly stressful applications, particularly tactical cockpit avionics. Due to lack of comparable and available data, programs have reached different judgments about the environmental tolerance and optical performance of ruggedized consumer-grade FPDs. There appear to be few systematic assessments of display performance impact on mission effectiveness. FPD availability concerns pivot on (1) the potentially rapid obsolescence of commercial FPDs and (2) the economic viability of domestic custom FPD suppliers. Display integrators using commercial FPDs are working to establish long-term supply arrangements with foreign producers of displays, but it is unclear how responsive these relationships will be in the future. Some DoD display integrators using custom FPDs believe that until the FPD market matures and stabilizes, it would be imprudent for DoD to become dependent on foreign, commercial FPD producers. However, many of these integrators are also concerned about the financial health of domestically based custom FPD producers.

Meta-tools for software development and knowledge acquisition

NASA Technical Reports Server (NTRS)

Eriksson, Henrik; Musen, Mark A.

1992-01-01

The effectiveness of tools that provide support for software development is highly dependent on the match between the tools and their task. Knowledge-acquisition (KA) tools constitute a class of development tools targeted at knowledge-based systems. Generally, KA tools that are custom-tailored for particular application domains are more effective than are general KA tools that cover a large class of domains. The high cost of custom-tailoring KA tools manually has encouraged researchers to develop meta-tools for KA tools. Current research issues in meta-tools for knowledge acquisition are the specification styles, or meta-views, for target KA tools used, and the relationships between the specification entered in the meta-tool and other specifications for the target program under development. We examine different types of meta-views and meta-tools. Our current project is to provide meta-tools that produce KA tools from multiple specification sources--for instance, from a task analysis of the target application.

Application specific serial arithmetic arrays

NASA Technical Reports Server (NTRS)

Winters, K.; Mathews, D.; Thompson, T.

1990-01-01

High performance systolic arrays of serial-parallel multiplier elements may be rapidly constructed for specific applications by applying hardware description language techniques to a library of full-custom CMOS building blocks. Single clock pre-charged circuits have been implemented for these arrays at clock rates in excess of 100 Mhz using economical 2-micron (minimum feature size) CMOS processes, which may be quickly configured for a variety of applications. A number of application-specific arrays are presented, including a 2-D convolver for image processing, an integer polynomial solver, and a finite-field polynomial solver.

IMPROVEMENT IN AIR TOXICS METHODS FOR VOLATILE ORGANIC COMPOUNDS

EPA Science Inventory

Innovative and customized monitoring methods for air toxic volatile organic compounds (VOCs) are being developed for applications in exposure and trends monitoring. This task addresses the following applications of specific interest:

o Contributions to EPA Regional Monit...

VHDL Modeling and Simulation of a Digital Image Synthesizer for Countering ISAR

DTIC Science & Technology

2003-06-01

This thesis discusses VHDL modeling and simulation of a full custom Application Specific Integrated Circuit (ASIC) for a Digital Image Synthesizer...necessary for a given application . With such a digital method, it is possible for a small ship to appear as large as an aircraft carrier or any high...INTRODUCTION TO DIGITAL IMAGE SYNTHESIZER (DIS) A. BACKGROUND The Digital Image Synthesizer (DIS) is an Application Specific Integrated Circuit

Portfolio-Scale Optimization of Customer Energy Efficiency Incentive and Marketing: Cooperative Research and Development Final Report, CRADA Number CRD-13-535

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brackney, Larry J.

North East utility National Grid (NGrid) is developing a portfolio-scale application of OpenStudio designed to optimize incentive and marketing expenditures for their energy efficiency (EE) programs. NGrid wishes to leverage a combination of geographic information systems (GIS), public records, customer data, and content from the Building Component Library (BCL) to form a JavaScript Object Notation (JSON) input file that is consumed by an OpenStudio-based expert system for automated model generation. A baseline model for each customer building will be automatically tuned using electricity and gas consumption data, and a set of energy conservation measures (ECMs) associated with each NGrid incentivemore » program will be applied to the model. The simulated energy performance and return on investment (ROI) will be compared with customer hurdle rates and available incentives to A) optimize the incentive required to overcome the customer hurdle rate and B) determine if marketing activity associated with the specific ECM is warranted for that particular customer. Repeated across their portfolio, this process will enable NGrid to substantially optimize their marketing and incentive expenditures, targeting those customers that will likely adopt and benefit from specific EE programs.« less

Contamination control concepts for space station customer servicing

NASA Technical Reports Server (NTRS)

Maruya, K. A.; Ryan, L. E.; Rosales, L. A.; Medler, E. H.

1986-01-01

The customer servicing operations envisioned for the space station, which include instrument repair, orbital replacement unit (ORU) changeout, and fluid replenishment for free-flying and attached payloads, are expected to create requirements for a unique contamination control subsystem for the customer servicing facility (CSF). Both the core space station and the CSF users present unique requirements/sensitivities, not all of which are currently defined with common criteria. Preliminary results from an assessment of the effects of the CSF-induced contamination environment are reported. Strategies for a comprehensive contamination control approach and a description of specific hardware devices and their applicability are discussed.

A Flexible Online Metadata Editing and Management System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Aguilar, Raul; Pan, Jerry Yun; Gries, Corinna

2010-01-01

A metadata editing and management system is being developed employing state of the art XML technologies. A modular and distributed design was chosen for scalability, flexibility, options for customizations, and the possibility to add more functionality at a later stage. The system consists of a desktop design tool or schema walker used to generate code for the actual online editor, a native XML database, and an online user access management application. The design tool is a Java Swing application that reads an XML schema, provides the designer with options to combine input fields into online forms and give the fieldsmore » user friendly tags. Based on design decisions, the tool generates code for the online metadata editor. The code generated is an implementation of the XForms standard using the Orbeon Framework. The design tool fulfills two requirements: First, data entry forms based on one schema may be customized at design time and second data entry applications may be generated for any valid XML schema without relying on custom information in the schema. However, the customized information generated at design time is saved in a configuration file which may be re-used and changed again in the design tool. Future developments will add functionality to the design tool to integrate help text, tool tips, project specific keyword lists, and thesaurus services. Additional styling of the finished editor is accomplished via cascading style sheets which may be further customized and different look-and-feels may be accumulated through the community process. The customized editor produces XML files in compliance with the original schema, however, data from the current page is saved into a native XML database whenever the user moves to the next screen or pushes the save button independently of validity. Currently the system uses the open source XML database eXist for storage and management, which comes with third party online and desktop management tools. However, access to metadata files in the application introduced here is managed in a custom online module, using a MySQL backend accessed by a simple Java Server Faces front end. A flexible system with three grouping options, organization, group and single editing access is provided. Three levels were chosen to distribute administrative responsibilities and handle the common situation of an information manager entering the bulk of the metadata but leave specifics to the actual data provider.« less

Issues and Methods for Assessing COTS Reliability, Maintainability, and Availability

NASA Technical Reports Server (NTRS)

Schneidewind, Norman F.; Nikora, Allen P.

1998-01-01

Many vendors produce products that are not domain specific (e.g., network server) and have limited functionality (e.g., mobile phone). In contrast, many customers of COTS develop systems that am domain specific (e.g., target tracking system) and have great variability in functionality (e.g., corporate information system). This discussion takes the viewpoint of how the customer can ensure the quality of COTS components. In evaluating the benefits and costs of using COTS, we must consider the environment in which COTS will operate. Thus we must distinguish between using a non-mission critical application like a spreadsheet program to produce a budget and a mission critical application like military strategic and tactical operations. Whereas customers will tolerate an occasional bug in the former, zero tolerance is the rule in the latter. We emphasize the latter because this is the arena where there are major unresolved problems in the application of COTS. Furthermore, COTS components may be embedded in the larger customer system. We refer to these as embedded systems. These components must be reliable, maintainable, and available, and must be with the larger system in order for the customer to benefit from the advertised advantages of lower development and maintenance costs. Interestingly, when the claims of COTS advantages are closely examined, one finds that to a great extent these COTS components consist of hardware and office products, not mission critical software [1]. Obviously, COTS components are different from custom components with respect to one or more of the following attributes: source, development paradigm, safety, reliability, maintainability, availability, security, and other attributes. However, the important question is whether they should be treated differently when deciding to deploy them for operational use; we suggest the answer is no. We use reliability as an example to justify our answer. In order to demonstrate its reliability, a COTS component must pass the same reliability evaluations as the custom components, otherwise the COTS components will be the weakest link in the chain of components and will be the determinant of software system reliability. The challenge is that there will be less information available for evaluating COTS components than for custom components but this does not mean we should despair and do nothing. Actually, there is a lot we can do even in the absence of documentation on COTS components because the customer will have information about how COTS components are to be used in the larger system. To illustrate our approach, we will consider the reliability, maintainability, and availability (RMA) of COTS components as used in larger systems. Finally, COTS suppliers might consider increasing visibility into their products to assist customers in determining the components' fitness for use in a particular application. We offer ideas of information that would be useful to customers, and what vendors might do to provide it.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pawlowski, Alex E.; Splitter, Derek A.; Muth, Thomas R.

Additive manufacturing by itself provides many benefits, but by combining different materials processing techniques like traditional casting with additive manufacturing to create hybrid processes, custom materials can be tailor-made and mass produced for applications with specific performance needs.

The future of automation for high-volume wafer fabrication and ASIC manufacturing

NASA Astrophysics Data System (ADS)

Hughes, Randall A.; Shott, John D.

1986-12-01

A framework is given to analyze the future trends in semiconductor manufacturing automation systems, focusing specifically on the needs of ASIC (application-specific integrated circuit) or custom integrated circuit manufacturing. Advances in technologies such as gate arrays and standard cells now make it significantly easier to obtain system cost and performance advantages by integrating nonstandard functions on silicon. ASICs are attractive to U.S. manufacturers because they place a premium on sophisticated design tools, familiarity with customer needs and applications, and fast turn-around fabrication. These are areas where U.S. manufacturers believe they have an advantage and, consequently, will not suffer from the severe price/manufacturing competition encountered in conventional high-volume semiconductor products. Previously, automation was often considered viable only for high-volume manufacturing, but automation becomes a necessity in the new ASIC environment.

Application of CHESS single-bounce capillaries at synchrotron beamlines

NASA Astrophysics Data System (ADS)

Huang, R.; Szebenyi, T.; Pfeifer, M.; Woll, A.; Smilgies, D.-M.; Finkelstein, K.; Dale, D.; Wang, Y.; Vila-Comamala, J.; Gillilan, R.; Cook, M.; Bilderback, D. H.

2014-03-01

Single-bounce capillaries are achromatic X-ray focusing optics that can provide efficient and high demagnification focusing with large numerical apertures. Capillary fabrication at CHESS can be customized according to specific application requirements. Exemplary applications are reviewed in this paper, as well as recent progress on condensers for high-resolution transmission X-ray microscopy and small focal size capillaries.

Genome Writing: Current Progress and Related Applications.

PubMed

Wang, Yueqiang; Shen, Yue; Gu, Ying; Zhu, Shida; Yin, Ye

2018-02-01

The ultimate goal of synthetic biology is to build customized cells or organisms to meet specific industrial or medical needs. The most important part of the customized cell is a synthetic genome. Advanced genomic writing technologies are required to build such an artificial genome. Recently, the partially-completed synthetic yeast genome project represents a milestone in this field. In this mini review, we briefly introduce the techniques for de novo genome synthesis and genome editing. Furthermore, we summarize recent research progresses and highlight several applications in the synthetic genome field. Finally, we discuss current challenges and future prospects. Copyright © 2018. Production and hosting by Elsevier B.V.

MO-B-BRD-00: Clinical Applications of 3D Printing

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

This session is designed so that the learning objectives are practical. The intent is that the attendee may take home an understanding of not just the technology, but also the logistical steps necessary to execute these 3D printing techniques in the clinic. Four practical 3D printing topics will be discussed: (i) Creating bolus and compensators for photon machines; (ii) tools for proton therapy; (iii) clinical applications in imaging; (iv) custom phantom design for clinic and research use. The use of 3D printers within the radiation oncology setting is proving to be a useful tool for creating patient specific bolus andmore » compensators with the added benefit of cost savings. Creating the proper protocol is essential to ensuring that the desired effect is achieved and modeled in the treatment planning system. The critical choice of printer material (since it determines the interaction with the radiation) will be discussed. Selection of 3D printer type, design methods, verification of dose calculation, and the printing process will be detailed to give the basis for establishing your own protocol for electron and photon fields. A practical discussion of likely obstacles that may be encountered will be included. The diversity of systems and techniques in proton facilities leads to different facilities having very different requirements for beam modifying hardware and quality assurance devices. Many departments find the need to design and fabricate facility-specific equipment, making 3D printing an attractive technology. 3D printer applications in proton therapy will be discussed, including beam filters and compensators, and the design of proton therapy specific quality assurance tools. Quality control specific to 3D printing in proton therapy will be addressed. Advantages and disadvantages of different printing technology for these applications will also be discussed. 3D printing applications using high-resolution radiology-based imaging data will be presented. This data is used to 3D print individualized physical models of patient’s unique anatomy for aid in planning complex and challenging surgical procedures. Methods, techniques and imaging requirements for 3D printing anatomic models from imaging data will be discussed. Specific applications currently being used in the radiology clinic will be detailed. Standardized phantoms for radiation therapy are abundant. However, custom phantom designs can be advantageous for both clinical tasks and research. 3D printing is a useful method of custom fabrication that allows one to construct custom objects relatively quickly. Possibilities for custom radiotherapy phantoms range from 3D printing a hollow shell and filling the shell with tissue equivalent materials to fully printing the entire phantom with materials that are tissue equivalent as well as suitable for 3D printing. A range of materials available for use in radiotherapy phantoms and in the case of phantoms for dosimetric measurements, this choice is critical. The necessary steps required will be discussed including: modalities of 3D model generation, 3D model requirements for 3D printing, generation of machine instructions from the 3D model, and 3D printing techniques, choice of phantoms material, and troubleshooting techniques for each step in the process. Case examples of 3D printed phantoms will be shown. Learning Objectives: Understand the types of 3D modeling software required to design your device, the file formats required for data transfer from design software to 3D printer, and general troubleshooting techniques for each step of the process. Learn the differences between materials and design for photons vs. electrons vs. protons. Understand the importance of material choice and design geometries for your custom phantoms. Learn specific steps of quality assurance and quality control for 3D printed beam filters and compensators for proton therapy. Learn of special 3D printing applications for imaging. Cunha: Research support from Phillips Healthcare.« less

MO-B-BRD-04: Sterilization for 3D Printed Brachytherapy Applicators

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cunha, J.

This session is designed so that the learning objectives are practical. The intent is that the attendee may take home an understanding of not just the technology, but also the logistical steps necessary to execute these 3D printing techniques in the clinic. Four practical 3D printing topics will be discussed: (i) Creating bolus and compensators for photon machines; (ii) tools for proton therapy; (iii) clinical applications in imaging; (iv) custom phantom design for clinic and research use. The use of 3D printers within the radiation oncology setting is proving to be a useful tool for creating patient specific bolus andmore » compensators with the added benefit of cost savings. Creating the proper protocol is essential to ensuring that the desired effect is achieved and modeled in the treatment planning system. The critical choice of printer material (since it determines the interaction with the radiation) will be discussed. Selection of 3D printer type, design methods, verification of dose calculation, and the printing process will be detailed to give the basis for establishing your own protocol for electron and photon fields. A practical discussion of likely obstacles that may be encountered will be included. The diversity of systems and techniques in proton facilities leads to different facilities having very different requirements for beam modifying hardware and quality assurance devices. Many departments find the need to design and fabricate facility-specific equipment, making 3D printing an attractive technology. 3D printer applications in proton therapy will be discussed, including beam filters and compensators, and the design of proton therapy specific quality assurance tools. Quality control specific to 3D printing in proton therapy will be addressed. Advantages and disadvantages of different printing technology for these applications will also be discussed. 3D printing applications using high-resolution radiology-based imaging data will be presented. This data is used to 3D print individualized physical models of patient’s unique anatomy for aid in planning complex and challenging surgical procedures. Methods, techniques and imaging requirements for 3D printing anatomic models from imaging data will be discussed. Specific applications currently being used in the radiology clinic will be detailed. Standardized phantoms for radiation therapy are abundant. However, custom phantom designs can be advantageous for both clinical tasks and research. 3D printing is a useful method of custom fabrication that allows one to construct custom objects relatively quickly. Possibilities for custom radiotherapy phantoms range from 3D printing a hollow shell and filling the shell with tissue equivalent materials to fully printing the entire phantom with materials that are tissue equivalent as well as suitable for 3D printing. A range of materials available for use in radiotherapy phantoms and in the case of phantoms for dosimetric measurements, this choice is critical. The necessary steps required will be discussed including: modalities of 3D model generation, 3D model requirements for 3D printing, generation of machine instructions from the 3D model, and 3D printing techniques, choice of phantoms material, and troubleshooting techniques for each step in the process. Case examples of 3D printed phantoms will be shown. Learning Objectives: Understand the types of 3D modeling software required to design your device, the file formats required for data transfer from design software to 3D printer, and general troubleshooting techniques for each step of the process. Learn the differences between materials and design for photons vs. electrons vs. protons. Understand the importance of material choice and design geometries for your custom phantoms. Learn specific steps of quality assurance and quality control for 3D printed beam filters and compensators for proton therapy. Learn of special 3D printing applications for imaging. Cunha: Research support from Phillips Healthcare.« less

A Multi-Period Optimization Model for Service Providers Using Online Reservation Systems: An Application to Hotels.

PubMed

Xu, Ming; Jiao, Yan; Li, Xiaoming; Cao, Qingfeng; Wang, Xiaoyang

2015-01-01

This paper presents a multi-period optimization model for high margin and zero salvage products in online distribution channels with classifying customers based on number of products required. Taking hotel customers as an example, one is regular customers who reserve rooms for one day, and the other is long term stay (LTS) customers who reserve rooms for a number of days. LTS may guarantee a specific amount of demand and generate opportunity income for a certain number of periods, meanwhile with risk of punishment incurred by overselling. By developing an operational optimization model and exploring the effects of parameters on optimal decisions, we suggest that service providers should make decisions based on the types of customers, number of products required, and duration of multi-period to reduce the loss of reputation and obtain more profit; at the same time, multi-period buying customers should buy products early. Finally, the paper conducts a numerical experiment, and the results are consistent with prevailing situations.

A Multi-Period Optimization Model for Service Providers Using Online Reservation Systems: An Application to Hotels

PubMed Central

Xu, Ming; Jiao, Yan; Li, Xiaoming; Cao, Qingfeng; Wang, Xiaoyang

2015-01-01

This paper presents a multi-period optimization model for high margin and zero salvage products in online distribution channels with classifying customers based on number of products required. Taking hotel customers as an example, one is regular customers who reserve rooms for one day, and the other is long term stay (LTS) customers who reserve rooms for a number of days. LTS may guarantee a specific amount of demand and generate opportunity income for a certain number of periods, meanwhile with risk of punishment incurred by overselling. By developing an operational optimization model and exploring the effects of parameters on optimal decisions, we suggest that service providers should make decisions based on the types of customers, number of products required, and duration of multi-period to reduce the loss of reputation and obtain more profit; at the same time, multi-period buying customers should buy products early. Finally, the paper conducts a numerical experiment, and the results are consistent with prevailing situations. PMID:26147663

Operationalizing Space Weather Products - Process and Issues

NASA Astrophysics Data System (ADS)

Scro, K. D.; Quigley, S.

2006-12-01

Developing and transitioning operational products for any customer base is a complicated process. This is the case for operational space weather products and services for the USAF. This presentation will provide information on the current state of affairs regarding the process required to take an idea from the research field to the real-time application of 24-hour space weather operations support. General principles and specific issues are discussed and will include: customer requirements, organizations in-play, funding, product types, acquisition of engineering and validation data, security classification, version control, and various important changes that occur during the process. The author's viewpoint is as an individual developing space environmental system-impact products for the US Air Force: 1) as a member of its primary research organization (Air Force Research Laboratory), 2) working with its primary space environment technology transition organization (Technology Application Division of the Space and Missile Systems Center, SMC/WXT), and 3) delivering to the primary sponsor/customer of such system-impact products (Air Force Space Command). The experience and focus is obviously on specific military operationalization process and issues, but most of the paradigm may apply to other (commercial) enterprises as well.

WE-F-16A-01: Commissioning and Clinical Use of PC-ISO for Customized, 3D Printed, Gynecological Brachytherapy Applicators

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cunha, J; Sethi, R; Mellis, K

Purpose: (1) Evaluate the safety and radiation attenuation properties of PCISO, a bio-compatible, sterilizable 3D printing material by Stratasys, (2) establish a method for commissioning customized multi- and single-use 3D printed applicators, (3) report on use of customized vaginal cylinders used to treat a series of serous endometrial cancer patient. Methods: A custom film dosimetry apparatus was designed to hold a Gafchromic radio film segment between two blocks of PC-ISO and 3D-printed using a Fortus 400mc (StrataSys). A dose plan was computed using 13 dwell positions at 2.5 mm spacing and normalized to 1500 cGy at 1 cm. Film exposuremore » was compared to control tests in only air and only water. The average Hounsfield Unit (HU) was computed and used to verify water equivalency. For the clinical use cases, the physician specifies the dimensions and geometry of a custom applicator from which a CAD model is designed and printed. Results: The doses measured from the PC-ISO Gafchromic film test were within 1% of the dose measured in only water between 1cm and 6cm from the channel. Doses increased 7–4% measured in only air. HU range was 11–43. The applicators were sterilized using the Sterrad system multiple times without damage. As of submission 3 unique cylinders have been designed, printed, and used in the clinic. A standardizable workflow for commissioning custom 3D printed applicators was codified and will be reported. Conclusions: Quality assurance (QA) evaluation of the PC-ISO 3D-printing material showed that PC-ISO is a suitable material for a gynecological brachytherapy vaginal cylinder in a clinical setting. With the material commissioning completed, if the physician determines that a better treatment would Result, a customized design is fabricated with limited additional QA necessary. Although this study was specific to PC-ISO, the same setup can be used to evaluate other 3D-printing materials.« less

Training basic laparoscopic skills using a custom-made video game.

PubMed

Goris, Jetse; Jalink, Maarten B; Ten Cate Hoedemaker, Henk O

2014-09-01

Video games are accepted and used for a wide variety of applications. In the medical world, research on the positive effects of playing games on basic laparoscopic skills is rapidly increasing. Although these benefits have been proven several times, no institution actually uses video games for surgical training. This Short Communication describes some of the theoretical backgrounds, development and underlying educational foundations of a specifically designed video game and custom-made hardware that takes advantage of the positive effects of games on basic laparoscopic skills.

3D printing for health & wealth: Fabrication of custom-made medical devices through additive manufacturing

NASA Astrophysics Data System (ADS)

Colpani, Alessandro; Fiorentino, Antonio; Ceretti, Elisabetta

2018-05-01

Additive Manufacturing (AM) differs from traditional manufacturing technologies by its ability to handle complex shapes with great design flexibility. These features make the technique suitable to fabricate customized components, particularly answering specific custom needs. Although AM mainly referred to prototyping, nowadays the interest in direct manufacturing of actual parts is growing. This article shows the application of AM within the project 3DP-4H&W (3D Printing for Health & Wealth) which involves engineers and physicians for developing pediatric custom-made medical devices to enhance the fulfilling of the patients specific needs. In the project, two types of devices made of a two-component biocompatible silicone are considered. The first application (dental field) consists in a device for cleft lip and palate. The second one (audiological field) consists in an acoustic prosthesis. The geometries of the devices are based on the anatomy of the patient that is obtained through a 3D body scan process. For both devices, two different approaches were planned, namely direct AM and indirect Rapid Tooling (RT). In particular, direct AM consists in the FDM processing of silicone, while RT consists in molds FDM fabrication followed by silicone casting. This paper presents the results of the RT method that is articulated in different phases: the acquisition of the geometry to be realized, the design of the molds taking into account the casting feasibility (as casting channel, vents, part extraction), the realization of molds produced through AM, molds surface chemical finishing, pouring and curing of the silicone. The fabricated devices were evaluated by the physicians team that confirmed the effectiveness of the proposed procedure in fabricating the desired devices. Moreover, the procedure can be used as a general method to extend the range of applications to any custom-made device for anatomic districts, especially where complex shapes are present (as tracheal or maxillary prostheses).

Heuristic Evaluation of E-Learning Courses: A Comparative Analysis of Two E-Learning Heuristic Sets

ERIC Educational Resources Information Center

Zaharias, Panagiotis; Koutsabasis, Panayiotis

2012-01-01

Purpose: The purpose of this paper is to discuss heuristic evaluation as a method for evaluating e-learning courses and applications and more specifically to investigate the applicability and empirical use of two customized e-learning heuristic protocols. Design/methodology/approach: Two representative e-learning heuristic protocols were chosen…

Microtechnology in Space: NASA's Lab-on-a-Chip Applications Development Program

NASA Technical Reports Server (NTRS)

Monaco, Lisa; Spearing, Scott; Jenkins, Andy; Symonds, Wes; Mayer, Derek; Gouldie, Edd; Wainwright, Norm; Fries, Marc; Maule, Jake; Toporski, Jan

2004-01-01

NASA's Marshall Space Flight Center (MSFC) Lab on a Chip Application Development LOCAD) team has worked with microfluidic technology for the past few years in an effort to support NASA's Mission. In that time, such microfluidic based Lab-on-a-Chip (LOC) systems have become common technology in clinical and diagnostic laboratories. The approach is most attractive due to its highly miniaturized platform and ability to perform reagent handling (i-e., dilution, mixing, separation) and diagnostics for multiple reactions in an integrated fashion. LOCAD, along with Caliper Life Sciences has successfully developed the first LOC device for macromolecular crystallization using a workstation acquired specifically for designing custom chips, the Caliper 42. LOCAD uses this, along with a novel MSFC-designed and built workstation for microfluidic development. The team has a cadre of LOC devices that can be used to perform initial feasibility testing to determine the efficacy of the LOC approach for a specific application. Once applicability has been established, the LOCAD team, along with the Army's Aviation and Missile Command microfabrication facility, can then begin to custom design and fabricate a device per the user's specifications. This presentation will highlight the LOCAD team's proven and unique expertise that has been utilized to provide end to end capabilities associated with applying microfluidics for applications that include robotic life detection instrumentation, crew health monitoring and microbial and environmental monitoring for human Exploration.

U.S. Heat Demand by Sector for Potential Application of Direct Use Geothermal

DOE Data Explorer

Katherine Young

2016-06-23

This dataset includes heat demand for potential application of direct use geothermal broken down into 4 sectors: agricultural, commercial, manufacturing and residential. The data for each sector are organized by county, were disaggregated specifically to assess the market demand for geothermal direct use, and were derived using methodologies customized for each sector based on the availability of data and other sector-specific factors. This dataset also includes a paper containing a full explanation of the methodologies used.

Comparative analysis of data mining techniques for business data

NASA Astrophysics Data System (ADS)

Jamil, Jastini Mohd; Shaharanee, Izwan Nizal Mohd

2014-12-01

Data mining is the process of employing one or more computer learning techniques to automatically analyze and extract knowledge from data contained within a database. Companies are using this tool to further understand their customers, to design targeted sales and marketing campaigns, to predict what product customers will buy and the frequency of purchase, and to spot trends in customer preferences that can lead to new product development. In this paper, we conduct a systematic approach to explore several of data mining techniques in business application. The experimental result reveals that all data mining techniques accomplish their goals perfectly, but each of the technique has its own characteristics and specification that demonstrate their accuracy, proficiency and preference.

MO-B-BRD-01: Creation of 3D Printed Phantoms for Clinical Radiation Therapy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ehler, E.

This session is designed so that the learning objectives are practical. The intent is that the attendee may take home an understanding of not just the technology, but also the logistical steps necessary to execute these 3D printing techniques in the clinic. Four practical 3D printing topics will be discussed: (i) Creating bolus and compensators for photon machines; (ii) tools for proton therapy; (iii) clinical applications in imaging; (iv) custom phantom design for clinic and research use. The use of 3D printers within the radiation oncology setting is proving to be a useful tool for creating patient specific bolus andmore » compensators with the added benefit of cost savings. Creating the proper protocol is essential to ensuring that the desired effect is achieved and modeled in the treatment planning system. The critical choice of printer material (since it determines the interaction with the radiation) will be discussed. Selection of 3D printer type, design methods, verification of dose calculation, and the printing process will be detailed to give the basis for establishing your own protocol for electron and photon fields. A practical discussion of likely obstacles that may be encountered will be included. The diversity of systems and techniques in proton facilities leads to different facilities having very different requirements for beam modifying hardware and quality assurance devices. Many departments find the need to design and fabricate facility-specific equipment, making 3D printing an attractive technology. 3D printer applications in proton therapy will be discussed, including beam filters and compensators, and the design of proton therapy specific quality assurance tools. Quality control specific to 3D printing in proton therapy will be addressed. Advantages and disadvantages of different printing technology for these applications will also be discussed. 3D printing applications using high-resolution radiology-based imaging data will be presented. This data is used to 3D print individualized physical models of patient’s unique anatomy for aid in planning complex and challenging surgical procedures. Methods, techniques and imaging requirements for 3D printing anatomic models from imaging data will be discussed. Specific applications currently being used in the radiology clinic will be detailed. Standardized phantoms for radiation therapy are abundant. However, custom phantom designs can be advantageous for both clinical tasks and research. 3D printing is a useful method of custom fabrication that allows one to construct custom objects relatively quickly. Possibilities for custom radiotherapy phantoms range from 3D printing a hollow shell and filling the shell with tissue equivalent materials to fully printing the entire phantom with materials that are tissue equivalent as well as suitable for 3D printing. A range of materials available for use in radiotherapy phantoms and in the case of phantoms for dosimetric measurements, this choice is critical. The necessary steps required will be discussed including: modalities of 3D model generation, 3D model requirements for 3D printing, generation of machine instructions from the 3D model, and 3D printing techniques, choice of phantoms material, and troubleshooting techniques for each step in the process. Case examples of 3D printed phantoms will be shown. Learning Objectives: Understand the types of 3D modeling software required to design your device, the file formats required for data transfer from design software to 3D printer, and general troubleshooting techniques for each step of the process. Learn the differences between materials and design for photons vs. electrons vs. protons. Understand the importance of material choice and design geometries for your custom phantoms. Learn specific steps of quality assurance and quality control for 3D printed beam filters and compensators for proton therapy. Learn of special 3D printing applications for imaging. Cunha: Research support from Phillips Healthcare.« less

MO-B-BRD-03: Principles, Pitfalls and Techniques of 3D Printing for Bolus and Compensators

DOE Office of Scientific and Technical Information (OSTI.GOV)

Baker, J.

This session is designed so that the learning objectives are practical. The intent is that the attendee may take home an understanding of not just the technology, but also the logistical steps necessary to execute these 3D printing techniques in the clinic. Four practical 3D printing topics will be discussed: (i) Creating bolus and compensators for photon machines; (ii) tools for proton therapy; (iii) clinical applications in imaging; (iv) custom phantom design for clinic and research use. The use of 3D printers within the radiation oncology setting is proving to be a useful tool for creating patient specific bolus andmore » compensators with the added benefit of cost savings. Creating the proper protocol is essential to ensuring that the desired effect is achieved and modeled in the treatment planning system. The critical choice of printer material (since it determines the interaction with the radiation) will be discussed. Selection of 3D printer type, design methods, verification of dose calculation, and the printing process will be detailed to give the basis for establishing your own protocol for electron and photon fields. A practical discussion of likely obstacles that may be encountered will be included. The diversity of systems and techniques in proton facilities leads to different facilities having very different requirements for beam modifying hardware and quality assurance devices. Many departments find the need to design and fabricate facility-specific equipment, making 3D printing an attractive technology. 3D printer applications in proton therapy will be discussed, including beam filters and compensators, and the design of proton therapy specific quality assurance tools. Quality control specific to 3D printing in proton therapy will be addressed. Advantages and disadvantages of different printing technology for these applications will also be discussed. 3D printing applications using high-resolution radiology-based imaging data will be presented. This data is used to 3D print individualized physical models of patient’s unique anatomy for aid in planning complex and challenging surgical procedures. Methods, techniques and imaging requirements for 3D printing anatomic models from imaging data will be discussed. Specific applications currently being used in the radiology clinic will be detailed. Standardized phantoms for radiation therapy are abundant. However, custom phantom designs can be advantageous for both clinical tasks and research. 3D printing is a useful method of custom fabrication that allows one to construct custom objects relatively quickly. Possibilities for custom radiotherapy phantoms range from 3D printing a hollow shell and filling the shell with tissue equivalent materials to fully printing the entire phantom with materials that are tissue equivalent as well as suitable for 3D printing. A range of materials available for use in radiotherapy phantoms and in the case of phantoms for dosimetric measurements, this choice is critical. The necessary steps required will be discussed including: modalities of 3D model generation, 3D model requirements for 3D printing, generation of machine instructions from the 3D model, and 3D printing techniques, choice of phantoms material, and troubleshooting techniques for each step in the process. Case examples of 3D printed phantoms will be shown. Learning Objectives: Understand the types of 3D modeling software required to design your device, the file formats required for data transfer from design software to 3D printer, and general troubleshooting techniques for each step of the process. Learn the differences between materials and design for photons vs. electrons vs. protons. Understand the importance of material choice and design geometries for your custom phantoms. Learn specific steps of quality assurance and quality control for 3D printed beam filters and compensators for proton therapy. Learn of special 3D printing applications for imaging. Cunha: Research support from Phillips Healthcare.« less

MO-B-BRD-02: 3D Printing in the Clinic

DOE Office of Scientific and Technical Information (OSTI.GOV)

Remmes, N.

This session is designed so that the learning objectives are practical. The intent is that the attendee may take home an understanding of not just the technology, but also the logistical steps necessary to execute these 3D printing techniques in the clinic. Four practical 3D printing topics will be discussed: (i) Creating bolus and compensators for photon machines; (ii) tools for proton therapy; (iii) clinical applications in imaging; (iv) custom phantom design for clinic and research use. The use of 3D printers within the radiation oncology setting is proving to be a useful tool for creating patient specific bolus andmore » compensators with the added benefit of cost savings. Creating the proper protocol is essential to ensuring that the desired effect is achieved and modeled in the treatment planning system. The critical choice of printer material (since it determines the interaction with the radiation) will be discussed. Selection of 3D printer type, design methods, verification of dose calculation, and the printing process will be detailed to give the basis for establishing your own protocol for electron and photon fields. A practical discussion of likely obstacles that may be encountered will be included. The diversity of systems and techniques in proton facilities leads to different facilities having very different requirements for beam modifying hardware and quality assurance devices. Many departments find the need to design and fabricate facility-specific equipment, making 3D printing an attractive technology. 3D printer applications in proton therapy will be discussed, including beam filters and compensators, and the design of proton therapy specific quality assurance tools. Quality control specific to 3D printing in proton therapy will be addressed. Advantages and disadvantages of different printing technology for these applications will also be discussed. 3D printing applications using high-resolution radiology-based imaging data will be presented. This data is used to 3D print individualized physical models of patient’s unique anatomy for aid in planning complex and challenging surgical procedures. Methods, techniques and imaging requirements for 3D printing anatomic models from imaging data will be discussed. Specific applications currently being used in the radiology clinic will be detailed. Standardized phantoms for radiation therapy are abundant. However, custom phantom designs can be advantageous for both clinical tasks and research. 3D printing is a useful method of custom fabrication that allows one to construct custom objects relatively quickly. Possibilities for custom radiotherapy phantoms range from 3D printing a hollow shell and filling the shell with tissue equivalent materials to fully printing the entire phantom with materials that are tissue equivalent as well as suitable for 3D printing. A range of materials available for use in radiotherapy phantoms and in the case of phantoms for dosimetric measurements, this choice is critical. The necessary steps required will be discussed including: modalities of 3D model generation, 3D model requirements for 3D printing, generation of machine instructions from the 3D model, and 3D printing techniques, choice of phantoms material, and troubleshooting techniques for each step in the process. Case examples of 3D printed phantoms will be shown. Learning Objectives: Understand the types of 3D modeling software required to design your device, the file formats required for data transfer from design software to 3D printer, and general troubleshooting techniques for each step of the process. Learn the differences between materials and design for photons vs. electrons vs. protons. Understand the importance of material choice and design geometries for your custom phantoms. Learn specific steps of quality assurance and quality control for 3D printed beam filters and compensators for proton therapy. Learn of special 3D printing applications for imaging. Cunha: Research support from Phillips Healthcare.« less

Sensor Network Middleware for Cyber-Physical Systems: Opportunities and Challenges

NASA Astrophysics Data System (ADS)

Singh, G.

2015-12-01

Wireless Sensor Network middleware typically provides abstractions for common tasks such as atomicity, synchronization and communication with the intention of isolating the developers of distributed applications from lower-level details of the underlying platforms. Developing middleware to meet the performance constraints of applications is an important challenge. Although one would like to develop generic middleware services which can be used in a variety of different applications, efficiency considerations often force developers to design middleware and algorithms customized to specific operational contexts. This presentation will discuss techniques to design middleware that is customizable to suit the performance needs of specific applications. We also discuss the challenges poised in designing middleware for pervasive sensor networks and cyber-physical systems with specific focus on environmental monitoring.

High Available COTS Based Computer for Space

NASA Astrophysics Data System (ADS)

Hartmann, J.; Magistrati, Giorgio

2015-09-01

The availability and reliability factors of a system are central requirements of a target application. From a simple fuel injection system used in cars up to a flight control system of an autonomous navigating spacecraft, each application defines its specific availability factor under the target application boundary conditions. Increasing quality requirements on data processing systems used in space flight applications calling for new architectures to fulfill the availability, reliability as well as the increase of the required data processing power. Contrary to the increased quality request simplification and use of COTS components to decrease costs while keeping the interface compatibility to currently used system standards are clear customer needs. Data processing system design is mostly dominated by strict fulfillment of the customer requirements and reuse of available computer systems were not always possible caused by obsolescence of EEE-Parts, insufficient IO capabilities or the fact that available data processing systems did not provide the required scalability and performance.

Fiber optic interferometry for industrial process monitoring and control applications

NASA Astrophysics Data System (ADS)

Marcus, Michael A.

2002-02-01

Over the past few years we have been developing applications for a high-resolution (sub-micron accuracy) fiber optic coupled dual Michelson interferometer-based instrument. It is being utilized in a variety of applications including monitoring liquid layer thickness uniformity on coating hoppers, film base thickness uniformity measurement, digital camera focus assessment, optical cell path length assessment and imager and wafer surface profile mapping. The instrument includes both coherent and non-coherent light sources, custom application dependent optical probes and sample interfaces, a Michelson interferometer, custom electronics, a Pentium-based PC with data acquisition cards and LabWindows CVI or LabView based application specific software. This paper describes the development evolution of this instrument platform and applications highlighting robust instrument design, hardware, software, and user interfaces development. The talk concludes with a discussion of a new high-speed instrument configuration, which can be utilized for high speed surface profiling and as an on-line web thickness gauge.

Producing Hybrid Metal Composites by Combining Additive Manufacturing and Casting

DOE PAGES

Pawlowski, Alex E.; Splitter, Derek A.; Muth, Thomas R.; ...

2017-10-01

Additive manufacturing by itself provides many benefits, but by combining different materials processing techniques like traditional casting with additive manufacturing to create hybrid processes, custom materials can be tailor-made and mass produced for applications with specific performance needs.

Professor: A motorized field-based phenotyping cart

USDA-ARS?s Scientific Manuscript database

An easy-to-customize, low-cost, low disturbance, motorized proximal sensing cart for field-based high-throughput phenotyping is described. General dimensions, motor specifications, and a remote operation application are given. The cart, named Professor, supports mounting multiple proximal sensors an...

The organism is the product.

PubMed

Kelly, Jason

2012-01-20

A new industry model is emerging where microbes are first developed by specialist organism engineering firms and then deployed by customers in specific application areas. It is now realistic for companies without prior fermentation experience to purchase and deploy an engineered organism to expand their business.

3D printing in X-ray and Gamma-Ray Imaging: A novel method for fabricating high-density imaging apertures☆

PubMed Central

Miller, Brian W.; Moore, Jared W.; Barrett, Harrison H.; Fryé, Teresa; Adler, Steven; Sery, Joe; Furenlid, Lars R.

2011-01-01

Advances in 3D rapid-prototyping printers, 3D modeling software, and casting techniques allow for cost-effective fabrication of custom components in gamma-ray and X-ray imaging systems. Applications extend to new fabrication methods for custom collimators, pinholes, calibration and resolution phantoms, mounting and shielding components, and imaging apertures. Details of the fabrication process for these components, specifically the 3D printing process, cold casting with a tungsten epoxy, and lost-wax casting in platinum are presented. PMID:22199414

Performance of customized DCT quantization tables on scientific data

NASA Technical Reports Server (NTRS)

Ratnakar, Viresh; Livny, Miron

1994-01-01

We show that it is desirable to use data-specific or customized quantization tables for scaling the spatial frequency coefficients obtained using the Discrete Cosine Transform (DCT). DCT is widely used for image and video compression (MP89, PM93) but applications typically use default quantization matrices. Using actual scientific data gathered from divers sources such as spacecrafts and electron-microscopes, we show that the default compression/quality tradeoffs can be significantly improved upon by using customized tables. We also show that significant improvements are possible for the standard test images Lena and Baboon. This work is part of an effort to develop a practical scheme for optimizing quantization matrices for any given image or video stream, under any given quality or compression constraints.

Creating Shape Templates for Patient Specific Biventricular Modeling in Congenital Heart Disease

PubMed Central

Gilbert, Kathleen; Farrar, Genevieve; Cowan, Brett R.; Suinesiaputra, Avan; Occleshaw, Christopher; Pontré, Beau; Perry, James; Hegde, Sanjeet; Marsden, Alison; Omens, Jeff; McCulloch, Andrew; Young, Alistair A.

2018-01-01

Survival rates for infants with congenital heart disease (CHD) are improving, resulting in a growing population of adults with CHD. However, the analysis of left and right ventricular function is very time-consuming owing to the variety of congenital morphologies. Efficient customization of patient geometry and function depends on high quality shape templates specifically designed for the application. In this paper, we combine a method for creating finite element shape templates with an interactive template customization to patient MRI examinations. This enables different templates to be chosen depending on patient morphology. To demonstrate this pipeline, a new biventricular template with 162 elements was created and tested in place of an existing 82-element template. The method was able to provide fast interactive biventricular analysis with 0.31 sec per edit response time. The new template was customized to 13 CHD patients with similar biventricular topology, showing improved performance over the previous template and good agreement with clinical indices. PMID:26736353

Teaching customer-centric operations management - evidence from an experiential learning-oriented mass customisation class

NASA Astrophysics Data System (ADS)

Medini, Khaled

2018-01-01

The increase of individualised customer demands and tough competition in the manufacturing sector gave rise to more customer-centric operations management such as products and services (mass) customisation. Mass customisation (MC), which inherits the 'economy of scale' from mass production (MP), aims to meet specific customer demands with near MP efficiency. Such an overarching concept has multiple impacts on operations management. This requires highly qualified and multi-skilled engineers who are well prepared for managing MC. Therefore, this concept should be properly addressed by engineering education curricula which needs to keep up with the emerging business trends. This paper introduces a novel course about MC and variety in operations management which recalls several Experiential Learning (EL) practices consistently with the principle of an active learning. The paper aims to analyse to which extent EL can improve the efficiency of the teaching methods and the retention rate in the context of operations management. The proposed course is given to engineering students whose' perceptions are collected using semi-structured questionnaires and analysed quantitatively and qualitatively. The paper highlights the relevance (i) of teaching MC, and (ii) of active learning in engineering education, through the specific application in the domain of MC.

VLSI synthesis of digital application specific neural networks

NASA Technical Reports Server (NTRS)

Beagles, Grant; Winters, Kel

1991-01-01

Neural networks tend to fall into two general categories: (1) software simulations, or (2) custom hardware that must be trained. The scope of this project is the merger of these two classifications into a system whereby a software model of a network is trained to perform a specific task and the results used to synthesize a standard cell realization of the network using automated tools.

Compact multispectral photodiode arrays using micropatterned dichroic filters

NASA Astrophysics Data System (ADS)

Chandler, Eric V.; Fish, David E.

2014-05-01

The next generation of multispectral instruments requires significant improvements in both spectral band customization and portability to support the widespread deployment of application-specific optical sensors. The benefits of spectroscopy are well established for numerous applications including biomedical instrumentation, industrial sorting and sensing, chemical detection, and environmental monitoring. In this paper, spectroscopic (and by extension hyperspectral) and multispectral measurements are considered. The technology, tradeoffs, and application fits of each are evaluated. In the majority of applications, monitoring 4-8 targeted spectral bands of optimized wavelength and bandwidth provides the necessary spectral contrast and correlation. An innovative approach integrates precision spectral filters at the photodetector level to enable smaller sensors, simplify optical designs, and reduce device integration costs. This method supports user-defined spectral bands to create application-specific sensors in a small footprint with scalable cost efficiencies. A range of design configurations, filter options and combinations are presented together with typical applications ranging from basic multi-band detection to stringent multi-channel fluorescence measurement. An example implementation packages 8 narrowband silicon photodiodes into a 9x9mm ceramic LCC (leadless chip carrier) footprint. This package is designed for multispectral applications ranging from portable color monitors to purpose- built OEM industrial and scientific instruments. Use of an eight-channel multispectral photodiode array typically eliminates 10-20 components from a device bill-of-materials (BOM), streamlining the optical path and shrinking the footprint by 50% or more. A stepwise design approach for multispectral sensors is discussed - including spectral band definition, optical design tradeoffs and constraints, and device integration from prototype through scalable volume production. Additional customization options are explored for application-specific OEM sensors integrated into portable devices using multispectral photodiode arrays.

19 CFR 115.49 - Application.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 1 2010-04-01 2010-04-01 false Application. 115.49 Section 115.49 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY CARGO CONTAINER AND ROAD VEHICLE CERTIFICATION PURSUANT TO INTERNATIONAL CUSTOMS CONVENTIONS Procedures...

19 CFR 115.49 - Application.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 1 2011-04-01 2011-04-01 false Application. 115.49 Section 115.49 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY CARGO CONTAINER AND ROAD VEHICLE CERTIFICATION PURSUANT TO INTERNATIONAL CUSTOMS CONVENTIONS Procedures...

19 CFR 115.49 - Application.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 19 Customs Duties 1 2014-04-01 2014-04-01 false Application. 115.49 Section 115.49 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY CARGO CONTAINER AND ROAD VEHICLE CERTIFICATION PURSUANT TO INTERNATIONAL CUSTOMS CONVENTIONS Procedures...

19 CFR 115.49 - Application.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 19 Customs Duties 1 2013-04-01 2013-04-01 false Application. 115.49 Section 115.49 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY CARGO CONTAINER AND ROAD VEHICLE CERTIFICATION PURSUANT TO INTERNATIONAL CUSTOMS CONVENTIONS Procedures...

19 CFR 115.49 - Application.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 19 Customs Duties 1 2012-04-01 2012-04-01 false Application. 115.49 Section 115.49 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY CARGO CONTAINER AND ROAD VEHICLE CERTIFICATION PURSUANT TO INTERNATIONAL CUSTOMS CONVENTIONS Procedures...

Lapin Data Interchange Among Database, Analysis and Display Programs Using XML-Based Text Files

NASA Technical Reports Server (NTRS)

2005-01-01

The purpose of grant NCC3-966 was to investigate and evaluate the interchange of application-specific data among multiple programs each carrying out part of the analysis and design task. This has been carried out previously by creating a custom program to read data produced by one application and then write that data to a file whose format is specific to the second application that needs all or part of that data. In this investigation, data of interest is described using the XML markup language that allows the data to be stored in a text-string. Software to transform output data of a task into an XML-string and software to read an XML string and extract all or a portion of the data needed for another application is used to link two independent applications together as part of an overall design effort. This approach was initially used with a standard analysis program, Lapin, along with standard applications a standard spreadsheet program, a relational database program, and a conventional dialog and display program to demonstrate the successful sharing of data among independent programs. Most of the effort beyond that demonstration has been concentrated on the inclusion of more complex display programs. Specifically, a custom-written windowing program organized around dialogs to control the interactions have been combined with an independent CAD program (Open Cascade) that supports sophisticated display of CAD elements such as lines, spline curves, and surfaces and turbine-blade data produced by an independent blade design program (UD0300).

DOE Office of Scientific and Technical Information (OSTI.GOV)

The ECE application forecasts annual costs of preventive and corrective maintenance for budgeting purposes. Features within the application enable the user to change the specifications of the model to customize your forecast to best fit their needs and support “what if” analysis. Based on the user's selections, the ECE model forecasts annual maintenance costs. Preventive maintenance costs include the cost of labor to perform preventive maintenance activities at the specific frequency and labor rate. Corrective maintenance costs include the cost of labor and the cost of replacement parts. The application presents forecasted maintenance costs for the next five years inmore » two tables: costs by year and costs by site.« less

Network Hardware Virtualization for Application Provisioning in Core Networks

DOE PAGES

Gumaste, Ashwin; Das, Tamal; Khandwala, Kandarp; ...

2017-02-03

We present that service providers and vendors are moving toward a network virtualized core, whereby multiple applications would be treated on their own merit in programmable hardware. Such a network would have the advantage of being customized for user requirements and allow provisioning of next generation services that are built specifically to meet user needs. In this article, we articulate the impact of network virtualization on networks that provide customized services and how a provider's business can grow with network virtualization. We outline a decision map that allows mapping of applications with technology that is supported in network-virtualization - orientedmore » equipment. Analogies to the world of virtual machines and generic virtualization show that hardware supporting network virtualization will facilitate new customer needs while optimizing the provider network from the cost and performance perspectives. A key conclusion of the article is that growth would yield sizable revenue when providers plan ahead in terms of supporting network-virtualization-oriented technology in their networks. To be precise, providers have to incorporate into their growth plans network elements capable of new service deployments while protecting network neutrality. Finally, a simulation study validates our NV-induced model.« less

Stiffness Customization and Patterning for Property Modulation of Silicone-Based Soft Pneumatic Actuators.

PubMed

Sun, Yi; Yap, Hong Kai; Liang, Xinquan; Guo, Jin; Qi, Peng; Ang, Marcelo H; Yeow, Chen-Hua

2017-09-01

Soft pneumatic actuators (SPAs), as novel types of motion drivers for robotic devices, excel in many applications, such as rehabilitation and biomimicry, which demand compliance and softness. To further expand their scope of utilization, the SPAs should be customizable to meet the distinctive requirements of different applications. This article proposes a novel perspective on the SPA working mechanism based on stiffness distribution and then presents a versatile method called stiffness customization and patterning (SCP) for SPA body stiffness layout as a novel attempt to customize SPAs with distinctive properties. We fabricated a hybrid type of material combining unstretchable material and silicone with customizable aggregated elasticity. The tensile results showed that embedding unstretchable material directly increases the stiffness of the hybrid material sample, and our stress-strain model for SCP is able to adequately predict the elasticity of hybrid samples with specific material ratios. By applying this approach to bending-type SPAs, we are able to mitigate SPA buckling, a main failure mode of SPAs, and improve the SPA tip force by using hybrid material with globally increased stiffness. We also diversify bending modalities with different stiffness configurations in the hybrid material. SCP offers numerous ways to engineer SPAs for more applications.

360 degree vision system: opportunities in transportation

NASA Astrophysics Data System (ADS)

Thibault, Simon

2007-09-01

Panoramic technologies are experiencing new and exciting opportunities in the transportation industries. The advantages of panoramic imagers are numerous: increased areas coverage with fewer cameras, imaging of multiple target simultaneously, instantaneous full horizon detection, easier integration of various applications on the same imager and others. This paper reports our work on panomorph optics and potential usage in transportation applications. The novel panomorph lens is a new type of high resolution panoramic imager perfectly suitable for the transportation industries. The panomorph lens uses optimization techniques to improve the performance of a customized optical system for specific applications. By adding a custom angle to pixel relation at the optical design stage, the optical system provides an ideal image coverage which is designed to reduce and optimize the processing. The optics can be customized for the visible, near infra-red (NIR) or infra-red (IR) wavebands. The panomorph lens is designed to optimize the cost per pixel which is particularly important in the IR. We discuss the use of the 360 vision system which can enhance on board collision avoidance systems, intelligent cruise controls and parking assistance. 360 panoramic vision systems might enable safer highways and significant reduction in casualties.

Network Hardware Virtualization for Application Provisioning in Core Networks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gumaste, Ashwin; Das, Tamal; Khandwala, Kandarp

We present that service providers and vendors are moving toward a network virtualized core, whereby multiple applications would be treated on their own merit in programmable hardware. Such a network would have the advantage of being customized for user requirements and allow provisioning of next generation services that are built specifically to meet user needs. In this article, we articulate the impact of network virtualization on networks that provide customized services and how a provider's business can grow with network virtualization. We outline a decision map that allows mapping of applications with technology that is supported in network-virtualization - orientedmore » equipment. Analogies to the world of virtual machines and generic virtualization show that hardware supporting network virtualization will facilitate new customer needs while optimizing the provider network from the cost and performance perspectives. A key conclusion of the article is that growth would yield sizable revenue when providers plan ahead in terms of supporting network-virtualization-oriented technology in their networks. To be precise, providers have to incorporate into their growth plans network elements capable of new service deployments while protecting network neutrality. Finally, a simulation study validates our NV-induced model.« less

Process Development of Porcelain Ceramic Material with Binder Jetting Process for Dental Applications

NASA Astrophysics Data System (ADS)

Miyanaji, Hadi; Zhang, Shanshan; Lassell, Austin; Zandinejad, Amirali; Yang, Li

2016-03-01

Custom ceramic structures possess significant potentials in many applications such as dentistry and aerospace where extreme environments are present. Specifically, highly customized geometries with adequate performance are needed for various dental prostheses applications. This paper demonstrates the development of process and post-process parameters for a dental porcelain ceramic material using binder jetting additive manufacturing (AM). Various process parameters such as binder amount, drying power level, drying time and powder spread speed were studied experimentally for their effect on geometrical and mechanical characteristics of green parts. In addition, the effects of sintering and printing parameters on the qualities of the densified ceramic structures were also investigated experimentally. The results provide insights into the process-property relationships for the binder jetting AM process, and some of the challenges of the process that need to be further characterized for the successful adoption of the binder jetting technology in high quality ceramic fabrications are discussed.

19 CFR 103.11 - Specific Customs Service records subject to disclosure.

Code of Federal Regulations, 2012 CFR

2012-04-01

... Department of the Treasury or of the United States Customs Service in matters administered by the United... contained therein is exempt from disclosure under § 103.12; (ii) Advisory committees on Customs matters... 19 Customs Duties 1 2012-04-01 2012-04-01 false Specific Customs Service records subject to...

19 CFR 103.11 - Specific Customs Service records subject to disclosure.

Code of Federal Regulations, 2014 CFR

2014-04-01

... Department of the Treasury or of the United States Customs Service in matters administered by the United... contained therein is exempt from disclosure under § 103.12; (ii) Advisory committees on Customs matters... 19 Customs Duties 1 2014-04-01 2014-04-01 false Specific Customs Service records subject to...

19 CFR 103.11 - Specific Customs Service records subject to disclosure.

Code of Federal Regulations, 2011 CFR

2011-04-01

... Department of the Treasury or of the United States Customs Service in matters administered by the United... contained therein is exempt from disclosure under § 103.12; (ii) Advisory committees on Customs matters... 19 Customs Duties 1 2011-04-01 2011-04-01 false Specific Customs Service records subject to...

19 CFR 103.11 - Specific Customs Service records subject to disclosure.

Code of Federal Regulations, 2013 CFR

2013-04-01

... Department of the Treasury or of the United States Customs Service in matters administered by the United... contained therein is exempt from disclosure under § 103.12; (ii) Advisory committees on Customs matters... 19 Customs Duties 1 2013-04-01 2013-04-01 false Specific Customs Service records subject to...

20 CFR 667.268 - What prohibitions apply to the use of WIA title I funds to encourage business relocation?

Code of Federal Regulations, 2010 CFR

2010-04-01

... her job at the original location; (2) Customized training, skill training, or on-the-job training or company specific assessments of job applicants or employees of a business or a part of a business that has...

Transformer Specification Language: A System for Generating Analyzers and Its Applications

DTIC Science & Technology

2011-01-01

like to thank present and former colleagues in PL group, Evan Driscoll, Aditya Thakur, Matt Elder, Tushar Sharma , Prathmesh Prabhu, Tycho Andersen, Emma...Robert Cohn, Robert Muth, Harish Patil, Artur Klauser, Geoff Lowney, Steven Wallace, Vijay Janapa Reddi, and Kim Hazelwood. Pin: building customized

19 CFR 162.70 - Applicability.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 2 2010-04-01 2010-04-01 false Applicability. 162.70 Section 162.70 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY (CONTINUED) INSPECTION, SEARCH, AND SEIZURE Special Procedures for Certain Violations § 162.70 Applicability...

Prototyping and implementing flight qualifiable semicustom CMOS P-well bulk integrated circuits in the JPL environment

NASA Technical Reports Server (NTRS)

Olson, E. M.

1986-01-01

Presently, there are many difficulties associated with implementing application specific custom or semi-custom (standard cell based) integrated circuits (ICs) into JPL flight projects. One of the primary difficulties is developing prototype semi-custom integrated circuits for use and evaluation in engineering prototype flight hardware. The prototype semi-custom ICs must be extremely cost-effective and yet still representative of flight qualifiable versions of the design. A second difficulty is encountered in the transport of the design from engineering prototype quality to flight quality. Normally, flight quality integrated circuits have stringent quality standards, must be radiation resistant and should consume minimal power. It is often not necessary or cost effective, however, to impose such stringent quality standards on engineering models developed for systems analysis in controlled lab environments. This article presents work originally initiated for ground based applications that also addresses these two problems. Furthermore, this article suggests a method that has been shown successful in prototyping flight quality semi-custom ICs through the Metal Oxide Semiconductor Implementation Service (MOSIS) program run by the University of Southern California's Information Sciences Institute. The method has been used successfully to design and fabricate through the MOSIS three different semi-custom prototype CMOS p-well chips. The three designs make use of the work presented and were designed consistent with design techniques and structures that are flight qualifiable, allowing one hour transfer of the design from engineering model status to flight qualifiable foundry-ready status through methods outlined in this article.

Casein films: effects of formulation, environmental conditions, and addition of citric pectin on the structure and mechanical properties

USDA-ARS?s Scientific Manuscript database

Thin casein films for food packaging applications reportedly possess good strength and low oxygen permeability, but low water-resistance and elasticity. Modifying and customizing the mechanical properties of the films to target specific behaviors depending on environmental conditions would enable a...

[Advocating standardization and customization of corneal refractive surgery in Chinese domestic situation].

PubMed

Zhang, F J; Song, Y Z

2016-07-01

With the improvement and application of excimer laser and femtosecond laser equipment in clinical ophthalmology, the diversified strategies for corneal refractive surgery candidates have been provided. Based on the trend of " all-laser treatment", it is very necessary to take the domestic situation into consideration when a standard and customized choice is made according to the indications of each specific surgical type. The characteristics and limitations of various surgeries are elucidated and commented here in order to provide some reasonable treatment options for refractive surgery. (Chin J Ophthalmol, 2016, 52: 481-485).

26 CFR 301.7327-1 - Customs laws applicable.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 26 Internal Revenue 18 2011-04-01 2011-04-01 false Customs laws applicable. 301.7327-1 Section 301.7327-1 Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT OF THE TREASURY (CONTINUED) PROCEDURE AND ADMINISTRATION PROCEDURE AND ADMINISTRATION Other Offenses § 301.7327-1 Customs laws applicable. For regulations...

19 CFR 143.3 - Action on application.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 2 2011-04-01 2011-04-01 false Action on application. 143.3 Section 143.3 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY (CONTINUED) SPECIAL ENTRY PROCEDURES Automated Broker Interface § 143.3 Action on application. (a) Approval...

19 CFR 133.12 - Application to record a trade name.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 19 Customs Duties 1 2014-04-01 2014-04-01 false Application to record a trade name. 133.12 Section 133.12 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY TRADEMARKS, TRADE NAMES, AND COPYRIGHTS Recordation of Trade Names § 133.12 Application to record a trade name. An application to...

75 FR 52456 - Customs Broker License Examination Individual Eligibility Requirements

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-26

... statements made in the application, the business integrity of the applicant, and the moral character and... partnership) must hold a valid customs broker's license and permit in order to transact customs business on... relating to the customs business of brokers as necessary to protect importers and the revenue of the United...

36 CFR 14.78 - Applications.

Code of Federal Regulations, 2010 CFR

2010-07-01

... to show, to the satisfaction of the authorized officer, the character, capacity, and location of such... customer, or a number of customers, or is intended to transmit power solely for the applicant's use. If the line is to serve a single customer or is for the applicant's own use, the nature of such use must be...

Lapin Data Interchange Among Database, Analysis and Display Programs Using XML-Based Text Files

NASA Technical Reports Server (NTRS)

2004-01-01

The purpose was to investigate and evaluate the interchange of application- specific data among multiple programs each carrying out part of the analysis and design task. This has been carried out previously by creating a custom program to read data produced by one application and then write that data to a file whose format is specific to the second application that needs all or part of that data. In this investigation, data of interest is described using the XML markup language that allows the data to be stored in a text-string. Software to transform output data of a task into an XML-string and software to read an XML string and extract all or a portion of the data needed for another application is used to link two independent applications together as part of an overall design effort. This approach was initially used with a standard analysis program, Lapin, along with standard applications a standard spreadsheet program, a relational database program, and a conventional dialog and display program to demonstrate the successful sharing of data among independent programs. See Engineering Analysis Using a Web-Based Protocol by J.D. Schoeffler and R.W. Claus, NASA TM-2002-211981, October 2002. Most of the effort beyond that demonstration has been concentrated on the inclusion of more complex display programs. Specifically, a custom-written windowing program organized around dialogs to control the interactions have been combined with an independent CAD program (Open Cascade) that supports sophisticated display of CAD elements such as lines, spline curves, and surfaces and turbine-blade data produced by an independent blade design program (UD0300).

Site-Specific Genome Engineering in Human Pluripotent Stem Cells.

PubMed

Merkert, Sylvia; Martin, Ulrich

2016-06-24

The possibility to generate patient-specific induced pluripotent stem cells (iPSCs) offers an unprecedented potential of applications in clinical therapy and medical research. Human iPSCs and their differentiated derivatives are tools for diseases modelling, drug discovery, safety pharmacology, and toxicology. Moreover, they allow for the engineering of bioartificial tissue and are promising candidates for cellular therapies. For many of these applications, the ability to genetically modify pluripotent stem cells (PSCs) is indispensable, but efficient site-specific and safe technologies for genetic engineering of PSCs were developed only recently. By now, customized engineered nucleases provide excellent tools for targeted genome editing, opening new perspectives for biomedical research and cellular therapies.

19 CFR 115.2 - Application.

Code of Federal Regulations, 2012 CFR

2012-04-01

....S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY CARGO CONTAINER AND ROAD VEHICLE CERTIFICATION PURSUANT TO INTERNATIONAL CUSTOMS CONVENTIONS General § 115.2 Application. (a) Certification of containers and road vehicles for international transport under Customs seal...

Using and Developing with CD-Interactive: Frequently Asked Questions Are Answered.

ERIC Educational Resources Information Center

Lediaev, Lucy; van Sonderen, Lex

1994-01-01

Discusses Compact Disc-Interactive (CD-I) using a question-and-answer format. Highlights include development of the CD-I technology; where to purchase discs and players; compatibility with other CD-ROM drives; how to make discs; authoring systems versus custom programs; entertainment and educational applications; licensing issues; specifications;…

Design and quality standards for custom hybrid microcircuits

NASA Technical Reports Server (NTRS)

Allen, R. V.

1977-01-01

A hybrid microcircuit standard was developed after a thorough review of applicable NASA, military, industry, and technical society specifications and standards and compilation of comments from technical reviewers throughout the hybrid industry. The draft of the standard submitted to the technical reviewers, the comments from the reviewers, and the completed standard are discussed.

Rheological behaviors of edible casein-based packaging films under extreme environmental conditions, using humidity-controlled dynamic mechanical analysis

USDA-ARS?s Scientific Manuscript database

Thin casein films for food packaging applications possess good strength and low oxygen permeability but low water-resistance and elasticity. Customizing the mechanical properties of the films to target specific behaviors depending on temperature and humidity changes would enable a variety of commerc...

19 CFR 103.5 - Specific requests for records.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 1 2011-04-01 2011-04-01 false Specific requests for records. 103.5 Section 103.5 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE... United States Customs Service is required, by 5 U.S.C. 552(a)(3), upon a request for reasonably-described...

19 CFR 103.5 - Specific requests for records.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 19 Customs Duties 1 2013-04-01 2013-04-01 false Specific requests for records. 103.5 Section 103.5 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE... United States Customs Service is required, by 5 U.S.C. 552(a)(3), upon a request for reasonably-described...

19 CFR 103.5 - Specific requests for records.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 19 Customs Duties 1 2012-04-01 2012-04-01 false Specific requests for records. 103.5 Section 103.5 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE... United States Customs Service is required, by 5 U.S.C. 552(a)(3), upon a request for reasonably-described...

19 CFR 103.5 - Specific requests for records.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 19 Customs Duties 1 2014-04-01 2014-04-01 false Specific requests for records. 103.5 Section 103.5 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE... United States Customs Service is required, by 5 U.S.C. 552(a)(3), upon a request for reasonably-described...

Fully printable, strain-engineered electronic wrap for customizable soft electronics.

PubMed

Byun, Junghwan; Lee, Byeongmoon; Oh, Eunho; Kim, Hyunjong; Kim, Sangwoo; Lee, Seunghwan; Hong, Yongtaek

2017-03-24

Rapid growth of stretchable electronics stimulates broad uses in multidisciplinary fields as well as industrial applications. However, existing technologies are unsuitable for implementing versatile applications involving adaptable system design and functions in a cost/time-effective way because of vacuum-conditioned, lithographically-predefined processes. Here, we present a methodology for a fully printable, strain-engineered electronic wrap as a universal strategy which makes it more feasible to implement various stretchable electronic systems with customizable layouts and functions. The key aspects involve inkjet-printed rigid island (PRI)-based stretchable platform technology and corresponding printing-based automated electronic functionalization methodology, the combination of which provides fully printed, customized layouts of stretchable electronic systems with simplified process. Specifically, well-controlled contact line pinning effect of printed polymer solution enables the formation of PRIs with tunable thickness; and surface strain analysis on those PRIs leads to the optimized stability and device-to-island fill factor of strain-engineered electronic wraps. Moreover, core techniques of image-based automated pinpointing, surface-mountable device based electronic functionalizing, and one-step interconnection networking of PRIs enable customized circuit design and adaptable functionalities. To exhibit the universality of our approach, multiple types of practical applications ranging from self-computable digital logics to display and sensor system are demonstrated on skin in a customized form.

Fully printable, strain-engineered electronic wrap for customizable soft electronics

NASA Astrophysics Data System (ADS)

Byun, Junghwan; Lee, Byeongmoon; Oh, Eunho; Kim, Hyunjong; Kim, Sangwoo; Lee, Seunghwan; Hong, Yongtaek

2017-03-01

Rapid growth of stretchable electronics stimulates broad uses in multidisciplinary fields as well as industrial applications. However, existing technologies are unsuitable for implementing versatile applications involving adaptable system design and functions in a cost/time-effective way because of vacuum-conditioned, lithographically-predefined processes. Here, we present a methodology for a fully printable, strain-engineered electronic wrap as a universal strategy which makes it more feasible to implement various stretchable electronic systems with customizable layouts and functions. The key aspects involve inkjet-printed rigid island (PRI)-based stretchable platform technology and corresponding printing-based automated electronic functionalization methodology, the combination of which provides fully printed, customized layouts of stretchable electronic systems with simplified process. Specifically, well-controlled contact line pinning effect of printed polymer solution enables the formation of PRIs with tunable thickness; and surface strain analysis on those PRIs leads to the optimized stability and device-to-island fill factor of strain-engineered electronic wraps. Moreover, core techniques of image-based automated pinpointing, surface-mountable device based electronic functionalizing, and one-step interconnection networking of PRIs enable customized circuit design and adaptable functionalities. To exhibit the universality of our approach, multiple types of practical applications ranging from self-computable digital logics to display and sensor system are demonstrated on skin in a customized form.

Fully printable, strain-engineered electronic wrap for customizable soft electronics

PubMed Central

Byun, Junghwan; Lee, Byeongmoon; Oh, Eunho; Kim, Hyunjong; Kim, Sangwoo; Lee, Seunghwan; Hong, Yongtaek

2017-01-01

Rapid growth of stretchable electronics stimulates broad uses in multidisciplinary fields as well as industrial applications. However, existing technologies are unsuitable for implementing versatile applications involving adaptable system design and functions in a cost/time-effective way because of vacuum-conditioned, lithographically-predefined processes. Here, we present a methodology for a fully printable, strain-engineered electronic wrap as a universal strategy which makes it more feasible to implement various stretchable electronic systems with customizable layouts and functions. The key aspects involve inkjet-printed rigid island (PRI)-based stretchable platform technology and corresponding printing-based automated electronic functionalization methodology, the combination of which provides fully printed, customized layouts of stretchable electronic systems with simplified process. Specifically, well-controlled contact line pinning effect of printed polymer solution enables the formation of PRIs with tunable thickness; and surface strain analysis on those PRIs leads to the optimized stability and device-to-island fill factor of strain-engineered electronic wraps. Moreover, core techniques of image-based automated pinpointing, surface-mountable device based electronic functionalizing, and one-step interconnection networking of PRIs enable customized circuit design and adaptable functionalities. To exhibit the universality of our approach, multiple types of practical applications ranging from self-computable digital logics to display and sensor system are demonstrated on skin in a customized form. PMID:28338055

Lifetime validation of high-reliability (>30,000hr) rotary cryocoolers for specific customer profiles

NASA Astrophysics Data System (ADS)

Cauquil, Jean-Marc; Seguineau, Cédric; Vasse, Christophe; Raynal, Gaetan; Benschop, Tonny

2018-05-01

The cooler reliability is a major performance requested by the customers, especially for 24h/24h applications, which are a growing market. Thales has built a reliability policy based on accelerate ageing and tests to establish a robust knowledge on acceleration factors. The current trend seems to prove that the RM2 mean time to failure is now higher than 30,000hr. Even with accelerate ageing; the reliability growth becomes hardly manageable for such large figures. The paper focuses on these figures and comments the robustness of such a method when projections over 30,000hr of MTTF are needed.

Genetic Algorithm Application in Optimization of Wireless Sensor Networks

PubMed Central

Norouzi, Ali; Zaim, A. Halim

2014-01-01

There are several applications known for wireless sensor networks (WSN), and such variety demands improvement of the currently available protocols and the specific parameters. Some notable parameters are lifetime of network and energy consumption for routing which play key role in every application. Genetic algorithm is one of the nonlinear optimization methods and relatively better option thanks to its efficiency for large scale applications and that the final formula can be modified by operators. The present survey tries to exert a comprehensive improvement in all operational stages of a WSN including node placement, network coverage, clustering, and data aggregation and achieve an ideal set of parameters of routing and application based WSN. Using genetic algorithm and based on the results of simulations in NS, a specific fitness function was achieved, optimized, and customized for all the operational stages of WSNs. PMID:24693235

Development (design and systematization) of HMS Group pump ranges

NASA Astrophysics Data System (ADS)

Tverdokhleb, I.; Yamburenko, V.

2017-08-01

The article reveals the need for pump range charts development for different applications and describes main principles used by HMS Group. Some modern approaches to pump selection are reviewed and highlighted the need for pump compliance with international standards and modern customer requirements. Even though pump design types are similar for different applications they need adjustment to specific requirements, which gets manufacturers develop their particular design for each pump range. Having wide pump ranges for different applications enables to create pump selection software, facilitating manufacturers to prepare high quality quotations in shortest time.

Infrastructure for Rapid Development of Java GUI Programs

NASA Technical Reports Server (NTRS)

Jones, Jeremy; Hostetter, Carl F.; Wheeler, Philip

2006-01-01

The Java Application Shell (JAS) is a software framework that accelerates the development of Java graphical-user-interface (GUI) application programs by enabling the reuse of common, proven GUI elements, as distinguished from writing custom code for GUI elements. JAS is a software infrastructure upon which Java interactive application programs and graphical user interfaces (GUIs) for those programs can be built as sets of plug-ins. JAS provides an application- programming interface that is extensible by application-specific plugins that describe and encapsulate both specifications of a GUI and application-specific functionality tied to the specified GUI elements. The desired GUI elements are specified in Extensible Markup Language (XML) descriptions instead of in compiled code. JAS reads and interprets these descriptions, then creates and configures a corresponding GUI from a standard set of generic, reusable GUI elements. These elements are then attached (again, according to the XML descriptions) to application-specific compiled code and scripts. An application program constructed by use of JAS as its core can be extended by writing new plug-ins and replacing existing plug-ins. Thus, JAS solves many problems that Java programmers generally solve anew for each project, thereby reducing development and testing time.

The ESGF Software Stack: a Configurable and Extensible Framework for Enabling Access to Geospatial Data

NASA Astrophysics Data System (ADS)

Cinquini, L.; Bell, G. M.; Williams, D.; Harney, J.

2012-12-01

The Earth System Grid Federation (ESGF) is a multi-agency, international collaboration that aims at developing state-of-the-art services for the management and access of Earth system data. ESGF is currently used to serve the totality of the model output used for the forthcoming IPCC 5th assessment report on climate change, as well as supporting observational and reanalysis datasets. Also, it is been adopted by several other projects that focus on global, regional and local climate modeling. The ESGF software stack is composed of several modular applications that cover related but disjoint areas of functionality: data publishing, data search and discovery, data access, user management, security, and federation. Overall, the ESGF infrastructure offers a configurable end-to-end solution to the problem of enabling web-based access to large amounts of geospatial data. This talk will present the architectural and configuration options that are available to a data provider leveraging ESGF to serve their data: which services to expose, how to scale to larger data collections, how to establish access control, how to customize the user interface, and others. Additionally, the framework provides extension points that allow each site to plug in custom functionality such as crawling of specific metadata repositories, exposing domain-specific analysis and visualization services, developing custom access clients that interact with the system APIs. These configuration and extension capabilities are based on simple but effective domain-specific object models, that underpin the software applications: the data model, the security model, and the federation model. The ESGF software stack is developed collaboratively by software engineers at many institutions around the world, and is made freely available to the community under an open source license to promote adoption, reuse, inspection and continuous improvement.

High-voltage integrated active quenching circuit for single photon count rate up to 80 Mcounts/s.

PubMed

Acconcia, Giulia; Rech, Ivan; Gulinatti, Angelo; Ghioni, Massimo

2016-08-08

Single photon avalanche diodes (SPADs) have been subject to a fast improvement in recent years. In particular, custom technologies specifically developed to fabricate SPAD devices give the designer the freedom to pursue the best detector performance required by applications. A significant breakthrough in this field is represented by the recent introduction of a red enhanced SPAD (RE-SPAD) technology, capable of attaining a good photon detection efficiency in the near infrared range (e.g. 40% at a wavelength of 800 nm) while maintaining a remarkable timing resolution of about 100ps full width at half maximum. Being planar, the RE-SPAD custom technology opened the way to the development of SPAD arrays particularly suited for demanding applications in the field of life sciences. However, to achieve such excellent performance custom SPAD detectors must be operated with an external active quenching circuit (AQC) designed on purpose. Next steps toward the development of compact and practical multichannel systems will require a new generation of monolithically integrated AQC arrays. In this paper we present a new, fully integrated AQC fabricated in a high-voltage 0.18 µm CMOS technology able to provide quenching pulses up to 50 Volts with fast leading and trailing edges. Although specifically designed for optimal operation of RE-SPAD devices, the new AQC is quite versatile: it can be used with any SPAD detector, regardless its fabrication technology, reaching remarkable count rates up to 80 Mcounts/s and generating a photon detection pulse with a timing jitter as low as 119 ps full width at half maximum. The compact design of our circuit has been specifically laid out to make this IC a suitable building block for monolithically integrated AQC arrays.

19 CFR 102.20 - Specific rules by tariff classification.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 19 Customs Duties 1 2014-04-01 2014-04-01 false Specific rules by tariff classification. 102.20 Section 102.20 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY RULES OF ORIGIN Rules of Origin § 102.20 Specific rules by tariff classification. The following rules are the rules specified...

19 CFR 102.20 - Specific rules by tariff classification.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 1 2011-04-01 2011-04-01 false Specific rules by tariff classification. 102.20 Section 102.20 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY RULES OF ORIGIN Rules of Origin § 102.20 Specific rules by tariff classification. The following rules are the rules specified...

19 CFR 102.20 - Specific rules by tariff classification.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 19 Customs Duties 1 2012-04-01 2012-04-01 false Specific rules by tariff classification. 102.20 Section 102.20 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY RULES OF ORIGIN Rules of Origin § 102.20 Specific rules by tariff classification. The following rules are the rules specified...

Malleable architecture generator for FPGA computing

NASA Astrophysics Data System (ADS)

Gokhale, Maya; Kaba, James; Marks, Aaron; Kim, Jang

1996-10-01

The malleable architecture generator (MARGE) is a tool set that translates high-level parallel C to configuration bit streams for field-programmable logic based computing systems. MARGE creates an application-specific instruction set and generates the custom hardware components required to perform exactly those computations specified by the C program. In contrast to traditional fixed-instruction processors, MARGE's dynamic instruction set creation provides for efficient use of hardware resources. MARGE processes intermediate code in which each operation is annotated by the bit lengths of the operands. Each basic block (sequence of straight line code) is mapped into a single custom instruction which contains all the operations and logic inherent in the block. A synthesis phase maps the operations comprising the instructions into register transfer level structural components and control logic which have been optimized to exploit functional parallelism and function unit reuse. As a final stage, commercial technology-specific tools are used to generate configuration bit streams for the desired target hardware. Technology- specific pre-placed, pre-routed macro blocks are utilized to implement as much of the hardware as possible. MARGE currently supports the Xilinx-based Splash-2 reconfigurable accelerator and National Semiconductor's CLAy-based parallel accelerator, MAPA. The MARGE approach has been demonstrated on systolic applications such as DNA sequence comparison.

Design of an efficient framework for fast prototyping of customized human-computer interfaces and virtual environments for rehabilitation.

PubMed

Avola, Danilo; Spezialetti, Matteo; Placidi, Giuseppe

2013-06-01

Rehabilitation is often required after stroke, surgery, or degenerative diseases. It has to be specific for each patient and can be easily calibrated if assisted by human-computer interfaces and virtual reality. Recognition and tracking of different human body landmarks represent the basic features for the design of the next generation of human-computer interfaces. The most advanced systems for capturing human gestures are focused on vision-based techniques which, on the one hand, may require compromises from real-time and spatial precision and, on the other hand, ensure natural interaction experience. The integration of vision-based interfaces with thematic virtual environments encourages the development of novel applications and services regarding rehabilitation activities. The algorithmic processes involved during gesture recognition activity, as well as the characteristics of the virtual environments, can be developed with different levels of accuracy. This paper describes the architectural aspects of a framework supporting real-time vision-based gesture recognition and virtual environments for fast prototyping of customized exercises for rehabilitation purposes. The goal is to provide the therapist with a tool for fast implementation and modification of specific rehabilitation exercises for specific patients, during functional recovery. Pilot examples of designed applications and preliminary system evaluation are reported and discussed. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

19 CFR 133.32 - Application to record copyright.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 1 2011-04-01 2011-04-01 false Application to record copyright. 133.32 Section 133.32 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY TRADEMARKS, TRADE NAMES, AND COPYRIGHTS Recordation of Copyrights § 133.32...

19 CFR 143.2 - Application.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 2 2011-04-01 2011-04-01 false Application. 143.2 Section 143.2 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY... description of the computer hardware, communications and entry processing systems to be used and the estimated...

19 CFR 143.2 - Application.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 19 Customs Duties 2 2014-04-01 2014-04-01 false Application. 143.2 Section 143.2 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY... description of the computer hardware, communications and entry processing systems to be used and the estimated...

19 CFR 143.2 - Application.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 19 Customs Duties 2 2012-04-01 2012-04-01 false Application. 143.2 Section 143.2 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY... description of the computer hardware, communications and entry processing systems to be used and the estimated...

19 CFR 143.2 - Application.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 19 Customs Duties 2 2013-04-01 2013-04-01 false Application. 143.2 Section 143.2 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY... description of the computer hardware, communications and entry processing systems to be used and the estimated...

19 CFR 143.2 - Application.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 2 2010-04-01 2010-04-01 false Application. 143.2 Section 143.2 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY... description of the computer hardware, communications and entry processing systems to be used and the estimated...

The Development of a Total Quality Management Plan for David Grant USAF Medical Center Travis Air Force Base, California

DTIC Science & Technology

1991-12-01

customer satisfaction (DOD, 1988). While the application of TQM in the manufacturing industry and the military acquisition system has been successful, the...improvement of products and services. The overriding objective of TOM is to increase customer satisfaction (DOD, 1988). While the application of TOM in the...25 Description of the Organization ................... 26 Internal Customers ..................... ....... 30 External Customers

Challenges in engineering large customized bone constructs.

PubMed

Forrestal, David P; Klein, Travis J; Woodruff, Maria A

2017-06-01

The ability to treat large tissue defects with customized, patient-specific scaffolds is one of the most exciting applications in the tissue engineering field. While an increasing number of modestly sized tissue engineering solutions are making the transition to clinical use, successfully scaling up to large scaffolds with customized geometry is proving to be a considerable challenge. Managing often conflicting requirements of cell placement, structural integrity, and a hydrodynamic environment supportive of cell culture throughout the entire thickness of the scaffold has driven the continued development of many techniques used in the production, culturing, and characterization of these scaffolds. This review explores a range of technologies and methods relevant to the design and manufacture of large, anatomically accurate tissue-engineered scaffolds with a focus on the interaction of manufactured scaffolds with the dynamic tissue culture fluid environment. Biotechnol. Bioeng. 2017;114: 1129-1139. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

Lessons learned from KSC processing on STS science, applications, and commercial payloads

NASA Technical Reports Server (NTRS)

Williams, W. E.; Ragusa, J. M.

1984-01-01

The present investigation is concerned with an evaluation of the lessons learned in connection with the flights of the Shuttle orbiters Columbia, Challenger, and Discovery. A description is provided of several general and specific lessons related to the processing of free-flying and attached payloads. John F. Kennedy Space Center (KSC), as the prime launch and landing site, is responsible for managing all payload-to-payload, payload-to-simulated orbiter, and payload-to-orbiter operations. For each payload, a KSC Launch Site Support Manager (LSSM) is named as the primary point of contact for the customer. Attention is given to aspects of planning interaction, payload types, and problems of ground processing. The discussed lessons are partly related to the value of early contact between customers and KSC representatives, the primary point of contact, the launch site support plan, and the importance of customer participation.

Opto-box: Optical modules and mini-crate for ATLAS pixel and IBL detectors

NASA Astrophysics Data System (ADS)

Bertsche, David

2016-11-01

The opto-box is a custom mini-crate for housing optical modules which process and transfer optoelectronic data. Many novel solutions were developed for the custom design and manufacturing. The system tightly integrates electrical, mechanical, and thermal functionality into a small package of size 35×10x8 cm3. Special attention was given to ensure proper shielding, grounding, cooling, high reliability, and environmental tolerance. The custom modules, which incorporate Application Specific Integrated Circuits, were developed through a cycle of rigorous testing and redesign. In total, fourteen opto-boxes have been installed and loaded with modules on the ATLAS detector. They are currently in operation as part of the LHC run 2 data read-out chain. This conference proceeding is in support of the poster presented at the International Conference on New Frontiers in Physics (ICNFP) 2015 [1].

7 CFR 2201.11 - Application requirements.

Code of Federal Regulations, 2011 CFR

2011-01-01

... of such conditions in the future, including: (i) The adequacy and stability of the business' customer... acquisition cost or cost per gross added, subscriber penetration, geographic concentration of customers, nature of the terms of customer contracts, customer technical support, customer satisfaction and...

7 CFR 2201.11 - Application requirements.

Code of Federal Regulations, 2014 CFR

2014-01-01

... of such conditions in the future, including: (i) The adequacy and stability of the business' customer... acquisition cost or cost per gross added, subscriber penetration, geographic concentration of customers, nature of the terms of customer contracts, customer technical support, customer satisfaction and...

7 CFR 2201.11 - Application requirements.

Code of Federal Regulations, 2013 CFR

2013-01-01

... of such conditions in the future, including: (i) The adequacy and stability of the business' customer... acquisition cost or cost per gross added, subscriber penetration, geographic concentration of customers, nature of the terms of customer contracts, customer technical support, customer satisfaction and...

7 CFR 2201.11 - Application requirements.

Code of Federal Regulations, 2012 CFR

2012-01-01

... of such conditions in the future, including: (i) The adequacy and stability of the business' customer... acquisition cost or cost per gross added, subscriber penetration, geographic concentration of customers, nature of the terms of customer contracts, customer technical support, customer satisfaction and...

19 CFR 181.91 - Applicability.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 19 Customs Duties 2 2013-04-01 2013-04-01 false Applicability. 181.91 Section 181.91 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY... provisions of this subpart whenever the requested ruling involves a subject matter specified in § 181.92(b)(6...

19 CFR 181.91 - Applicability.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 19 Customs Duties 2 2012-04-01 2012-04-01 false Applicability. 181.91 Section 181.91 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY... provisions of this subpart whenever the requested ruling involves a subject matter specified in § 181.92(b)(6...

19 CFR 181.91 - Applicability.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 2 2010-04-01 2010-04-01 false Applicability. 181.91 Section 181.91 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY... provisions of this subpart whenever the requested ruling involves a subject matter specified in § 181.92(b)(6...

19 CFR 181.91 - Applicability.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 19 Customs Duties 2 2014-04-01 2014-04-01 false Applicability. 181.91 Section 181.91 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY... provisions of this subpart whenever the requested ruling involves a subject matter specified in § 181.92(b)(6...

19 CFR 181.91 - Applicability.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 2 2011-04-01 2011-04-01 false Applicability. 181.91 Section 181.91 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY... provisions of this subpart whenever the requested ruling involves a subject matter specified in § 181.92(b)(6...

19 CFR 133.3 - Documents and fee to accompany application.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 1 2011-04-01 2011-04-01 false Documents and fee to accompany application. 133.3 Section 133.3 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY TRADEMARKS, TRADE NAMES, AND COPYRIGHTS Recordation of Trademarks § 133.3...

SU-G-TeP4-06: An Integrated Application for Radiation Therapy Treatment Plan Directives, Management, and Reporting

DOE Office of Scientific and Technical Information (OSTI.GOV)

Matuszak, M; Anderson, C; Lee, C

Purpose: With electronic medical records, patient information for the treatment planning process has become disseminated across multiple applications with limited quality control and many associated failure modes. We present the development of a single application with a centralized database to manage the planning process. Methods: The system was designed to replace current functionalities of (i) static directives representing the physician intent for the prescription and planning goals, localization information for delivery, and other information, (ii) planning objective reports, (iii) localization and image guidance documents and (iv) the official radiation therapy prescription in the medical record. Using the Eclipse Scripting Applicationmore » Programming Interface, a plug-in script with an associated domain-specific SQL Server database was created to manage the information in (i)–(iv). The system’s user interface and database were designed by a team of physicians, clinical physicists, database experts, and software engineers to ensure usability and robustness for clinical use. Results: The resulting system has been fully integrated within the TPS via a custom script and database. Planning scenario templates, version control, approvals, and logic-based quality control allow this system to fully track and document the planning process as well as physician approval of tradeoffs while improving the consistency of the data. Multiple plans and prescriptions are supported along with non-traditional dose objectives and evaluation such as biologically corrected models, composite dose limits, and management of localization goals. User-specific custom views were developed for the attending physician review, physicist plan checks, treating therapists, and peer review in chart rounds. Conclusion: A method was developed to maintain cohesive information throughout the planning process within one integrated system by using a custom treatment planning management application that interfaces directly with the TPS. Future work includes quantifying the improvements in quality, safety and efficiency that are possible with the routine clinical use of this system. Supported in part by NIH-P01-CA-059827.« less

19 CFR 351.701 - Applicability dates.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 3 2010-04-01 2010-04-01 false Applicability dates. 351.701 Section 351.701 Customs Duties INTERNATIONAL TRADE ADMINISTRATION, DEPARTMENT OF COMMERCE ANTIDUMPING AND COUNTERVAILING DUTIES Applicability Dates § 351.701 Applicability dates. The regulations contained in this part 351...

19 CFR 351.701 - Applicability dates.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 3 2011-04-01 2011-04-01 false Applicability dates. 351.701 Section 351.701 Customs Duties INTERNATIONAL TRADE ADMINISTRATION, DEPARTMENT OF COMMERCE ANTIDUMPING AND COUNTERVAILING DUTIES Applicability Dates § 351.701 Applicability dates. The regulations contained in this part 351...

19 CFR 351.701 - Applicability dates.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 19 Customs Duties 3 2013-04-01 2013-04-01 false Applicability dates. 351.701 Section 351.701 Customs Duties INTERNATIONAL TRADE ADMINISTRATION, DEPARTMENT OF COMMERCE ANTIDUMPING AND COUNTERVAILING DUTIES Applicability Dates § 351.701 Applicability dates. The regulations contained in this part 351...

19 CFR 351.701 - Applicability dates.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 19 Customs Duties 3 2014-04-01 2014-04-01 false Applicability dates. 351.701 Section 351.701 Customs Duties INTERNATIONAL TRADE ADMINISTRATION, DEPARTMENT OF COMMERCE ANTIDUMPING AND COUNTERVAILING DUTIES Applicability Dates § 351.701 Applicability dates. The regulations contained in this part 351...

19 CFR 351.701 - Applicability dates.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 19 Customs Duties 3 2012-04-01 2012-04-01 false Applicability dates. 351.701 Section 351.701 Customs Duties INTERNATIONAL TRADE ADMINISTRATION, DEPARTMENT OF COMMERCE ANTIDUMPING AND COUNTERVAILING DUTIES Applicability Dates § 351.701 Applicability dates. The regulations contained in this part 351...

48 CFR 552.238-75 - Price Reductions.

Code of Federal Regulations, 2010 CFR

2010-10-01

... relationship to the identified customer (or category of customers). This relationship shall be maintained... applicable to the identified customer (or category of customers) which disturbs this relationship shall...) Before award of a contract, the Contracting Officer and the Offeror will agree upon (1) the customer (or...

Performance specifications: the nearly impossible versus the merely difficult

NASA Astrophysics Data System (ADS)

Hopper, Darrel G.

2000-08-01

Affordability is the objective of acquisition reform. The institution of 'performance' specifications in lieu of 'design' specifications is a key strategy. Design of a cockpit display, for example, is left to the prime contractor based on a performance requirement stated by the government. The prime delegates to the integrator. The integrator develops the display and bill of materials provided by vendors. There is no feedback loop from the vendors to the ultimate customer, the government. As a result of this situation a communication gap exists: the government, primes, and integrators have concluded that they should pay commodity prices for custom displays. One step in the closing of this gap is the establishment of cross- cutting common reference performance specifications for aerospace and defense displays. The performance specification for cockpit displays is nearly impossible to achieve -- the last ounce of technology and more is required. Commodity markets, such as consumer notebook computers, are based on but a fraction of currently available technology -- companies 'bank' technology and roll it out across several 18-month product generations. Ruggedized consumer displays can be used in aerospace and defense applications other than the cockpit, such as mission crew stations. The performance specification for non-cockpit aerospace and defense applications is merely difficult. Acquisition reform has been defined by the Secretary of Defense to mean DoD should leverage the commercial market to the maximal extent possible. For the achievement of this end, an entirely different approach is wanted for cockpit displays versus large platform mission displays. That is, the nearly impossible requires a different design and business approach from the merely difficult.

19 CFR 351.702 - Applicability dates for countervailing duty regulations.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 3 2010-04-01 2010-04-01 false Applicability dates for countervailing duty regulations. 351.702 Section 351.702 Customs Duties INTERNATIONAL TRADE ADMINISTRATION, DEPARTMENT OF COMMERCE ANTIDUMPING AND COUNTERVAILING DUTIES Applicability Dates § 351.702 Applicability dates for countervailing...

19 CFR 202.2 - Applications.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 3 2010-04-01 2010-04-01 false Applications. 202.2 Section 202.2 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION NONADJUDICATIVE INVESTIGATIONS INVESTIGATIONS OF COSTS OF PRODUCTION § 202.2 Applications. (a) Who may file. Applications for an investigation to which this part 202...

19 CFR 202.2 - Applications.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 19 Customs Duties 3 2012-04-01 2012-04-01 false Applications. 202.2 Section 202.2 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION NONADJUDICATIVE INVESTIGATIONS INVESTIGATIONS OF COSTS OF PRODUCTION § 202.2 Applications. (a) Who may file. Applications for an investigation to which this part 202...

19 CFR 351.702 - Applicability dates for countervailing duty regulations.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 19 Customs Duties 3 2012-04-01 2012-04-01 false Applicability dates for countervailing duty regulations. 351.702 Section 351.702 Customs Duties INTERNATIONAL TRADE ADMINISTRATION, DEPARTMENT OF COMMERCE ANTIDUMPING AND COUNTERVAILING DUTIES Applicability Dates § 351.702 Applicability dates for countervailing...

19 CFR 202.2 - Applications.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 3 2011-04-01 2011-04-01 false Applications. 202.2 Section 202.2 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION NONADJUDICATIVE INVESTIGATIONS INVESTIGATIONS OF COSTS OF PRODUCTION § 202.2 Applications. (a) Who may file. Applications for an investigation to which this part 202...

19 CFR 351.702 - Applicability dates for countervailing duty regulations.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 19 Customs Duties 3 2014-04-01 2014-04-01 false Applicability dates for countervailing duty regulations. 351.702 Section 351.702 Customs Duties INTERNATIONAL TRADE ADMINISTRATION, DEPARTMENT OF COMMERCE ANTIDUMPING AND COUNTERVAILING DUTIES Applicability Dates § 351.702 Applicability dates for countervailing...

19 CFR 351.702 - Applicability dates for countervailing duty regulations.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 3 2011-04-01 2011-04-01 false Applicability dates for countervailing duty regulations. 351.702 Section 351.702 Customs Duties INTERNATIONAL TRADE ADMINISTRATION, DEPARTMENT OF COMMERCE ANTIDUMPING AND COUNTERVAILING DUTIES Applicability Dates § 351.702 Applicability dates for countervailing...

19 CFR 202.2 - Applications.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 19 Customs Duties 3 2013-04-01 2013-04-01 false Applications. 202.2 Section 202.2 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION NONADJUDICATIVE INVESTIGATIONS INVESTIGATIONS OF COSTS OF PRODUCTION § 202.2 Applications. (a) Who may file. Applications for an investigation to which this part 202...

19 CFR 202.2 - Applications.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 19 Customs Duties 3 2014-04-01 2014-04-01 false Applications. 202.2 Section 202.2 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION NONADJUDICATIVE INVESTIGATIONS INVESTIGATIONS OF COSTS OF PRODUCTION § 202.2 Applications. (a) Who may file. Applications for an investigation to which this part 202...

19 CFR 351.702 - Applicability dates for countervailing duty regulations.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 19 Customs Duties 3 2013-04-01 2013-04-01 false Applicability dates for countervailing duty regulations. 351.702 Section 351.702 Customs Duties INTERNATIONAL TRADE ADMINISTRATION, DEPARTMENT OF COMMERCE ANTIDUMPING AND COUNTERVAILING DUTIES Applicability Dates § 351.702 Applicability dates for countervailing...

19 CFR 133.33 - Documents and fee to accompany application.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 19 Customs Duties 1 2013-04-01 2013-04-01 false Documents and fee to accompany application. 133.33 Section 133.33 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY... matter readily identifiable by title and author or if it covers a sound recording. Five likenesses of a...

19 CFR 133.33 - Documents and fee to accompany application.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 19 Customs Duties 1 2014-04-01 2014-04-01 false Documents and fee to accompany application. 133.33 Section 133.33 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY... matter readily identifiable by title and author or if it covers a sound recording. Five likenesses of a...

19 CFR 133.33 - Documents and fee to accompany application.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 19 Customs Duties 1 2012-04-01 2012-04-01 false Documents and fee to accompany application. 133.33 Section 133.33 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY... matter readily identifiable by title and author or if it covers a sound recording. Five likenesses of a...

19 CFR 133.13 - Documents and fee to accompany application.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 1 2011-04-01 2011-04-01 false Documents and fee to accompany application. 133.13 Section 133.13 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY TRADEMARKS, TRADE NAMES, AND COPYRIGHTS Recordation of Trade Names § 133.13...

Economics of automation for the design-to-mask interface

NASA Astrophysics Data System (ADS)

Erck, Wesley

2009-04-01

Mask order automation has increased steadily over the years through a variety of individual mask customer implementations. These have been supported by customer-specific software at the mask suppliers to support the variety of customer output formats. Some customers use the SEMI P10 1 standard, some use supplier-specific formats, and some use customer-specific formats. Some customers use little automation and depend instead on close customer-supplier relationships. Implementations are varied in quality and effectiveness. A major factor which has prolonged the adoption of more advanced and effective solutions has been a lack of understanding of the economic benefits. Some customers think standardized automation mainly benefits the mask supplier in order entry automation, but this ignores a number of other significant benefits which differ dramatically for each party in the supply chain. This paper discusses the nature of those differing advantages and presents simple models suited to four business cases: integrated device manufacturers (IDM), fabless companies, foundries and mask suppliers. Examples and estimates of the financial advantages for these business types will be shown.

Value Addition to Cartosat-I Imagery

NASA Astrophysics Data System (ADS)

Mohan, M.

2014-11-01

In the sector of remote sensing applications, the use of stereo data is on the steady rise. An attempt is hereby made to develop a software suite specifically for exploitation of Cartosat-I data. A few algorithms to enhance the quality of basic Cartosat-I products will be presented. The algorithms heavily exploit the Rational Function Coefficients (RPCs) that are associated with the image. The algorithms include improving the geometric positioning through Bundle Block Adjustment and producing refined RPCs; generating portable stereo views using raw / refined RPCs autonomously; orthorectification and mosaicing; registering a monoscopic image rapidly with a single seed point. The outputs of these modules (including the refined RPCs) are in standard formats for further exploitation in 3rd party software. The design focus has been on minimizing the user-interaction and to customize heavily to suit the Indian context. The core libraries are in C/C++ and some of the applications come with user-friendly GUI. Further customization to suit a specific workflow is feasible as the requisite photogrammetric tools are in place and are continuously upgraded. The paper discusses the algorithms and the design considerations of developing the tools. The value-added products so produced using these tools will also be presented.

Thin Film Coating Technology For Ophthalmic Lenses

NASA Astrophysics Data System (ADS)

Guenther, K. H.

1986-05-01

Coating of ophthalmic lenses is an application of high-vacuum coating technology which must satisfy not only physical and technical requirements but also customer demands with respect to aesthetics, color fidelity, and exchangeability of coated ophthalmic lenses. Because this application caters specifically to the consumer market, ophthalmic lenses are subject to certain fashion trends which frequently require quick adaptation of the coating technique. The state-of-the-art of ophthalmic lens coating is reviewed in this paper, with particular emphasis on the durability requirements in daily use by untrained consumers as well as on the applicable testing methods.

Improving Customer Satisfaction in an R and D Environment

NASA Technical Reports Server (NTRS)

Alexander, Anita; Liou, Y. H. Andrew

1998-01-01

Satisfying customer needs is critical to the sustained competitive advantage of service suppliers. It is therefore important to understand the types of customer needs which, if fulfilled or exceeded, add value and contribute to overall customer satisfaction. This study identifies the needs of various research and development (R&D) customers who contract for engineering and design support services. The Quality Function Deployment (QFD) process was used to organize and translate each customer need into performance measures that, if implemented, can improve customer satisfaction. This study also provides specific performance measures that will more accurately guide the efforts of the engineering supplier. These organizations can either implement the QFD methodology presented herein or extract a few performance measures that are specific to the quality dimensions in need of improvement. Listening to 'what' customers talk about is a good first start.

MEVA--An Interactive Visualization Application for Validation of Multifaceted Meteorological Data with Multiple 3D Devices.

PubMed

Helbig, Carolin; Bilke, Lars; Bauer, Hans-Stefan; Böttinger, Michael; Kolditz, Olaf

2015-01-01

To achieve more realistic simulations, meteorologists develop and use models with increasing spatial and temporal resolution. The analyzing, comparing, and visualizing of resulting simulations becomes more and more challenging due to the growing amounts and multifaceted character of the data. Various data sources, numerous variables and multiple simulations lead to a complex database. Although a variety of software exists suited for the visualization of meteorological data, none of them fulfills all of the typical domain-specific requirements: support for quasi-standard data formats and different grid types, standard visualization techniques for scalar and vector data, visualization of the context (e.g., topography) and other static data, support for multiple presentation devices used in modern sciences (e.g., virtual reality), a user-friendly interface, and suitability for cooperative work. Instead of attempting to develop yet another new visualization system to fulfill all possible needs in this application domain, our approach is to provide a flexible workflow that combines different existing state-of-the-art visualization software components in order to hide the complexity of 3D data visualization tools from the end user. To complete the workflow and to enable the domain scientists to interactively visualize their data without advanced skills in 3D visualization systems, we developed a lightweight custom visualization application (MEVA - multifaceted environmental data visualization application) that supports the most relevant visualization and interaction techniques and can be easily deployed. Specifically, our workflow combines a variety of different data abstraction methods provided by a state-of-the-art 3D visualization application with the interaction and presentation features of a computer-games engine. Our customized application includes solutions for the analysis of multirun data, specifically with respect to data uncertainty and differences between simulation runs. In an iterative development process, our easy-to-use application was developed in close cooperation with meteorologists and visualization experts. The usability of the application has been validated with user tests. We report on how this application supports the users to prove and disprove existing hypotheses and discover new insights. In addition, the application has been used at public events to communicate research results.

MEVA - An Interactive Visualization Application for Validation of Multifaceted Meteorological Data with Multiple 3D Devices

PubMed Central

Helbig, Carolin; Bilke, Lars; Bauer, Hans-Stefan; Böttinger, Michael; Kolditz, Olaf

2015-01-01

Background To achieve more realistic simulations, meteorologists develop and use models with increasing spatial and temporal resolution. The analyzing, comparing, and visualizing of resulting simulations becomes more and more challenging due to the growing amounts and multifaceted character of the data. Various data sources, numerous variables and multiple simulations lead to a complex database. Although a variety of software exists suited for the visualization of meteorological data, none of them fulfills all of the typical domain-specific requirements: support for quasi-standard data formats and different grid types, standard visualization techniques for scalar and vector data, visualization of the context (e.g., topography) and other static data, support for multiple presentation devices used in modern sciences (e.g., virtual reality), a user-friendly interface, and suitability for cooperative work. Methods and Results Instead of attempting to develop yet another new visualization system to fulfill all possible needs in this application domain, our approach is to provide a flexible workflow that combines different existing state-of-the-art visualization software components in order to hide the complexity of 3D data visualization tools from the end user. To complete the workflow and to enable the domain scientists to interactively visualize their data without advanced skills in 3D visualization systems, we developed a lightweight custom visualization application (MEVA - multifaceted environmental data visualization application) that supports the most relevant visualization and interaction techniques and can be easily deployed. Specifically, our workflow combines a variety of different data abstraction methods provided by a state-of-the-art 3D visualization application with the interaction and presentation features of a computer-games engine. Our customized application includes solutions for the analysis of multirun data, specifically with respect to data uncertainty and differences between simulation runs. In an iterative development process, our easy-to-use application was developed in close cooperation with meteorologists and visualization experts. The usability of the application has been validated with user tests. We report on how this application supports the users to prove and disprove existing hypotheses and discover new insights. In addition, the application has been used at public events to communicate research results. PMID:25915061

ICE: A Scalable, Low-Cost FPGA-Based Telescope Signal Processing and Networking System

NASA Astrophysics Data System (ADS)

Bandura, K.; Bender, A. N.; Cliche, J. F.; de Haan, T.; Dobbs, M. A.; Gilbert, A. J.; Griffin, S.; Hsyu, G.; Ittah, D.; Parra, J. Mena; Montgomery, J.; Pinsonneault-Marotte, T.; Siegel, S.; Smecher, G.; Tang, Q. Y.; Vanderlinde, K.; Whitehorn, N.

2016-03-01

We present an overview of the ‘ICE’ hardware and software framework that implements large arrays of interconnected field-programmable gate array (FPGA)-based data acquisition, signal processing and networking nodes economically. The system was conceived for application to radio, millimeter and sub-millimeter telescope readout systems that have requirements beyond typical off-the-shelf processing systems, such as careful control of interference signals produced by the digital electronics, and clocking of all elements in the system from a single precise observatory-derived oscillator. A new generation of telescopes operating at these frequency bands and designed with a vastly increased emphasis on digital signal processing to support their detector multiplexing technology or high-bandwidth correlators — data rates exceeding a terabyte per second — are becoming common. The ICE system is built around a custom FPGA motherboard that makes use of an Xilinx Kintex-7 FPGA and ARM-based co-processor. The system is specialized for specific applications through software, firmware and custom mezzanine daughter boards that interface to the FPGA through the industry-standard FPGA mezzanine card (FMC) specifications. For high density applications, the motherboards are packaged in 16-slot crates with ICE backplanes that implement a low-cost passive full-mesh network between the motherboards in a crate, allow high bandwidth interconnection between crates and enable data offload to a computer cluster. A Python-based control software library automatically detects and operates the hardware in the array. Examples of specific telescope applications of the ICE framework are presented, namely the frequency-multiplexed bolometer readout systems used for the South Pole Telescope (SPT) and Simons Array and the digitizer, F-engine, and networking engine for the Canadian Hydrogen Intensity Mapping Experiment (CHIME) and Hydrogen Intensity and Real-time Analysis eXperiment (HIRAX) radio interferometers.

Characterization of the VEGA ASIC coupled to large area position-sensitive Silicon Drift Detectors

NASA Astrophysics Data System (ADS)

Campana, R.; Evangelista, Y.; Fuschino, F.; Ahangarianabhari, M.; Macera, D.; Bertuccio, G.; Grassi, M.; Labanti, C.; Marisaldi, M.; Malcovati, P.; Rachevski, A.; Zampa, G.; Zampa, N.; Andreani, L.; Baldazzi, G.; Del Monte, E.; Favre, Y.; Feroci, M.; Muleri, F.; Rashevskaya, I.; Vacchi, A.; Ficorella, F.; Giacomini, G.; Picciotto, A.; Zuffa, M.

2014-08-01

Low-noise, position-sensitive Silicon Drift Detectors (SDDs) are particularly useful for experiments in which a good energy resolution combined with a large sensitive area is required, as in the case of X-ray astronomy space missions and medical applications. This paper presents the experimental characterization of VEGA, a custom Application Specific Integrated Circuit (ASIC) used as the front-end electronics for XDXL-2, a large-area (30.5 cm2) SDD prototype. The ASICs were integrated on a specifically developed PCB hosting also the detector. Results on the ASIC noise performances, both stand-alone and bonded to the large area SDD, are presented and discussed.

19 CFR 201.1 - Applicability of part.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 3 2010-04-01 2010-04-01 false Applicability of part. 201.1 Section 201.1 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION GENERAL RULES OF GENERAL APPLICATION § 201.1 Applicability of part. This part relates generally to functions and activities of the Commission under various...

19 CFR 201.1 - Applicability of part.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 19 Customs Duties 3 2012-04-01 2012-04-01 false Applicability of part. 201.1 Section 201.1 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION GENERAL RULES OF GENERAL APPLICATION § 201.1 Applicability of part. This part relates generally to functions and activities of the Commission under various...

19 CFR 201.1 - Applicability of part.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 19 Customs Duties 3 2013-04-01 2013-04-01 false Applicability of part. 201.1 Section 201.1 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION GENERAL RULES OF GENERAL APPLICATION § 201.1 Applicability of part. This part relates generally to functions and activities of the Commission under various...

19 CFR 201.1 - Applicability of part.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 3 2011-04-01 2011-04-01 false Applicability of part. 201.1 Section 201.1 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION GENERAL RULES OF GENERAL APPLICATION § 201.1 Applicability of part. This part relates generally to functions and activities of the Commission under various...

19 CFR 201.1 - Applicability of part.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 19 Customs Duties 3 2014-04-01 2014-04-01 false Applicability of part. 201.1 Section 201.1 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION GENERAL RULES OF GENERAL APPLICATION § 201.1 Applicability of part. This part relates generally to functions and activities of the Commission under various...

Design, installation, and performance evaluation of a custom dye matrix standard for automated capillary electrophoresis.

PubMed

Cloete, Kevin Wesley; Ristow, Peter Gustav; Kasu, Mohaimin; D'Amato, Maria Eugenia

2017-03-01

CE equipment detects and deconvolutes mixtures containing up to six fluorescently labeled DNA fragments. This deconvolution is done by the collection software that requires a spectral calibration file. The calibration file is used to adjust for the overlap that occurs between the emission spectra of fluorescence dyes. All commercial genotyping and sequencing kits require the installation of a corresponding matrix standard to generate a calibration file. Due to the differences in emission spectrum overlap between fluorescent dyes, the application of existing commercial matrix standards to the electrophoretic separation of DNA labeled with other fluorescent dyes can yield undesirable results. Currently, the number of fluorescent dyes available for oligonucleotide labeling surpasses the availability of commercial matrix standards. Therefore, in this study we developed and evaluated a customized matrix standard using ATTO 633, ATTO 565, ATTO 550, ATTO Rho6G, and 6-FAM dyes for which no commercial matrix standard is available. We highlighted the potential genotyping errors of using an incorrect matrix standard by evaluating the relative performance of our custom dye set using six matrix standards. The specific performance of two genotyping kits (UniQTyper™ Y-10 version 1.0 and PowerPlex® Y23 System) was also evaluated using their specific matrix standards. The procedure we followed for the construction of our custom dye matrix standard can be extended to other fluorescent dyes. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

41 CFR 101-28.301 - Applicability.

Code of Federal Regulations, 2010 CFR

2010-07-01

... FEDERAL PROPERTY MANAGEMENT REGULATIONS SUPPLY AND PROCUREMENT 28-STORAGE AND DISTRIBUTION 28.3-Customer Supply Centers § 101-28.301 Applicability. This subpart is applicable to all activities that are eligible to use customer supply centers. Eligible activities include executive agencies, elements of the...

Application programs written by using customizing tools of a computer-aided design system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Li, X.; Huang, R.; Juricic, D.

1995-12-31

Customizing tools of Computer-Aided Design Systems have been developed to such a degree as to become equivalent to powerful higher-level programming languages that are especially suitable for graphics applications. Two examples of application programs written by using AutoCAD`s customizing tools are given in some detail to illustrate their power. One tool uses AutoLISP list-processing language to develop an application program that produces four views of a given solid model. The other uses AutoCAD Developmental System, based on program modules written in C, to produce an application program that renders a freehand sketch from a given CAD drawing.

Customer-Specific Transaction Risk Management in E-Commerce

NASA Astrophysics Data System (ADS)

Ruch, Markus; Sackmann, Stefan

Increasing potential for turnover in e-commerce is inextricably linked with an increase in risk. Online retailers (e-tailers), aiming for a company-wide value orientation should manage this risk. However, current approaches to risk management either use average retail prices elevated by an overall risk premium or restrict the payment methods offered to customers. Thus, they neglect customer-specific value and risk attributes and leave turnover potentials unconsidered. To close this gap, an innovative valuation model is proposed in this contribution that integrates customer-specific risk and potential turnover. The approach presented evaluates different payment methods using their risk-turnover characteristic, provides a risk-adjusted decision basis for selecting payment methods and allows e-tailers to derive automated risk management decisions per customer and transaction without reducing turnover potential.

Low Noise Camera for Suborbital Science Applications

NASA Technical Reports Server (NTRS)

Hyde, David; Robertson, Bryan; Holloway, Todd

2015-01-01

Low-cost, commercial-off-the-shelf- (COTS-) based science cameras are intended for lab use only and are not suitable for flight deployment as they are difficult to ruggedize and repackage into instruments. Also, COTS implementation may not be suitable since mission science objectives are tied to specific measurement requirements, and often require performance beyond that required by the commercial market. Custom camera development for each application is cost prohibitive for the International Space Station (ISS) or midrange science payloads due to nonrecurring expenses ($2,000 K) for ground-up camera electronics design. While each new science mission has a different suite of requirements for camera performance (detector noise, speed of image acquisition, charge-coupled device (CCD) size, operation temperature, packaging, etc.), the analog-to-digital conversion, power supply, and communications can be standardized to accommodate many different applications. The low noise camera for suborbital applications is a rugged standard camera platform that can accommodate a range of detector types and science requirements for use in inexpensive to mid range payloads supporting Earth science, solar physics, robotic vision, or astronomy experiments. Cameras developed on this platform have demonstrated the performance found in custom flight cameras at a price per camera more than an order of magnitude lower.

Extending the XNAT archive tool for image and analysis management in ophthalmology research

NASA Astrophysics Data System (ADS)

Wahle, Andreas; Lee, Kyungmoo; Harding, Adam T.; Garvin, Mona K.; Niemeijer, Meindert; Sonka, Milan; Abràmoff, Michael D.

2013-03-01

In ophthalmology, various modalities and tests are utilized to obtain vital information on the eye's structure and function. For example, optical coherence tomography (OCT) is utilized to diagnose, screen, and aid treatment of eye diseases like macular degeneration or glaucoma. Such data are complemented by photographic retinal fundus images and functional tests on the visual field. DICOM isn't widely used yet, though, and frequently images are encoded in proprietary formats. The eXtensible Neuroimaging Archive Tool (XNAT) is an open-source NIH-funded framework for research PACS and is in use at the University of Iowa for neurological research applications. Its use for ophthalmology was hence desirable but posed new challenges due to data types thus far not considered and the lack of standardized formats. We developed custom tools for data types not natively recognized by XNAT itself using XNAT's low-level REST API. Vendor-provided tools can be included as necessary to convert proprietary data sets into valid DICOM. Clients can access the data in a standardized format while still retaining the original format if needed by specific analysis tools. With respective project-specific permissions, results like segmentations or quantitative evaluations can be stored as additional resources to previously uploaded datasets. Applications can use our abstract-level Python or C/C++ API to communicate with the XNAT instance. This paper describes concepts and details of the designed upload script templates, which can be customized to the needs of specific projects, and the novel client-side communication API which allows integration into new or existing research applications.

HSCT4.0 Application: Software Requirements Specification

NASA Technical Reports Server (NTRS)

Salas, A. O.; Walsh, J. L.; Mason, B. H.; Weston, R. P.; Townsend, J. C.; Samareh, J. A.; Green, L. L.

2001-01-01

The software requirements for the High Performance Computing and Communication Program High Speed Civil Transport application project, referred to as HSCT4.0, are described. The objective of the HSCT4.0 application project is to demonstrate the application of high-performance computing techniques to the problem of multidisciplinary design optimization of a supersonic transport configuration, using high-fidelity analysis simulations. Descriptions of the various functions (and the relationships among them) that make up the multidisciplinary application as well as the constraints on the software design arc provided. This document serves to establish an agreement between the suppliers and the customer as to what the HSCT4.0 application should do and provides to the software developers the information necessary to design and implement the system.

Automatically Grading Customer Confidence in a Formal Specification.

ERIC Educational Resources Information Center

Shukur, Zarina; Burke, Edmund; Foxley, Eric

1999-01-01

Describes an automatic grading system for a formal methods computer science course that is able to evaluate a formal specification written in the Z language. Quality is measured by considering first, specification correctness (syntax, semantics, and satisfaction of customer requirements), and second, specification maintainability (comparison of…

19 CFR 201.102 - Application.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 3 2010-04-01 2010-04-01 false Application. 201.102 Section 201.102 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION GENERAL RULES OF GENERAL APPLICATION Enforcement of Nondiscrimination on the Basis of Handicap in Programs or Activities Conducted by the U.S. International Trade...

19 CFR 201.102 - Application.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 19 Customs Duties 3 2013-04-01 2013-04-01 false Application. 201.102 Section 201.102 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION GENERAL RULES OF GENERAL APPLICATION Enforcement of Nondiscrimination on the Basis of Handicap in Programs or Activities Conducted by the U.S. International Trade...

19 CFR 201.102 - Application.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 19 Customs Duties 3 2014-04-01 2014-04-01 false Application. 201.102 Section 201.102 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION GENERAL RULES OF GENERAL APPLICATION Enforcement of Nondiscrimination on the Basis of Handicap in Programs or Activities Conducted by the U.S. International Trade...

19 CFR 201.102 - Application.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 3 2011-04-01 2011-04-01 false Application. 201.102 Section 201.102 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION GENERAL RULES OF GENERAL APPLICATION Enforcement of Nondiscrimination on the Basis of Handicap in Programs or Activities Conducted by the U.S. International Trade...

19 CFR 201.102 - Application.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 19 Customs Duties 3 2012-04-01 2012-04-01 false Application. 201.102 Section 201.102 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION GENERAL RULES OF GENERAL APPLICATION Enforcement of Nondiscrimination on the Basis of Handicap in Programs or Activities Conducted by the U.S. International Trade...

Research on the construction of three level customer service knowledge graph

NASA Astrophysics Data System (ADS)

Cheng, Shi; Shen, Jiajie; Shi, Quan; Cheng, Xianyi

2017-09-01

With the explosion of knowledge and information of the enterprise and the growing demand for intelligent knowledge management and application and improve business performance the knowledge expression and processing of the enterprise has become a hot topic. Aim at the problems of the electric marketing customer service knowledge map (customer service knowledge map) in building theory and method, electric marketing knowledge map of three levels of customer service was discussed, and realizing knowledge reasoning based on Neo4j, achieve good results in practical application.

Transforming Multidisciplinary Customer Requirements to Product Design Specifications

NASA Astrophysics Data System (ADS)

Ma, Xiao-Jie; Ding, Guo-Fu; Qin, Sheng-Feng; Li, Rong; Yan, Kai-Yin; Xiao, Shou-Ne; Yang, Guang-Wu

2017-09-01

With the increasing of complexity of complex mechatronic products, it is necessary to involve multidisciplinary design teams, thus, the traditional customer requirements modeling for a single discipline team becomes difficult to be applied in a multidisciplinary team and project since team members with various disciplinary backgrounds may have different interpretations of the customers' requirements. A new synthesized multidisciplinary customer requirements modeling method is provided for obtaining and describing the common understanding of customer requirements (CRs) and more importantly transferring them into a detailed and accurate product design specifications (PDS) to interact with different team members effectively. A case study of designing a high speed train verifies the rationality and feasibility of the proposed multidisciplinary requirement modeling method for complex mechatronic product development. This proposed research offersthe instruction to realize the customer-driven personalized customization of complex mechatronic product.

Distributed utility technology cost, performance, and environmental characteristics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wan, Y; Adelman, S

1995-06-01

Distributed Utility (DU) is an emerging concept in which modular generation and storage technologies sited near customer loads in distribution systems and specifically targeted demand-side management programs are used to supplement conventional central station generation plants to meet customer energy service needs. Research has shown that implementation of the DU concept could provide substantial benefits to utilities. This report summarizes the cost, performance, and environmental and siting characteristics of existing and emerging modular generation and storage technologies that are applicable under the DU concept. It is intended to be a practical reference guide for utility planners and engineers seeking informationmore » on DU technology options. This work was funded by the Office of Utility Technologies of the US Department of Energy.« less

19 CFR 212.21 - Answer to application.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 3 2010-04-01 2010-04-01 false Answer to application. 212.21 Section 212.21 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION INVESTIGATIONS OF UNFAIR PRACTICES IN IMPORT TRADE IMPLEMENTATION OF THE EQUAL ACCESS TO JUSTICE ACT Procedures for Considering Applications § 212.21...

Optically Isolated Control of the MOCHI LabJet High Power Pulsed Plasma Experiment

NASA Astrophysics Data System (ADS)

Carroll, Evan; Quinley, Morgan; von der Linden, Jens; You, Setthivoine

2014-10-01

The MOCHI LabJet experiment designed to investigate the dynamics of astrophysical jets at the University of Washington, requires high energy pulsed power supplies for plasma generation and sustainment. Two 600 μ F, 10 kV DC, pulse forming, power supplies have been specifically developed for this application. For safe and convenient user operation, the power supplies are controlled remotely with optical isolation. Three input voltage signals are required for relay actuation, adjusting bank charging voltage, and to fire the experiment: long duration DC signals, long duration user adjustable DC signals and fast trigger pulses with < μ s rise times. These voltage signals are generated from National Instruments timing cards via LabVIEW and are converted to optical signals by coupling photodiodes with custom electronic circuits. At the experiment, the optical signals are converted back to usable voltage signals using custom circuits. These custom circuits and experimental set-up are presented. This work is supported by US DOE Grant DE-SC0010340.

An alternative method to amplify RNA without loss of signal conservation for expression analysis with a proteinase DNA microarray in the ArrayTube format.

PubMed

Schüler, Susann; Wenz, Ingrid; Wiederanders, B; Slickers, P; Ehricht, R

2006-06-12

Recent developments in DNA microarray technology led to a variety of open and closed devices and systems including high and low density microarrays for high-throughput screening applications as well as microarrays of lower density for specific diagnostic purposes. Beside predefined microarrays for specific applications manufacturers offer the production of custom-designed microarrays adapted to customers' wishes. Array based assays demand complex procedures including several steps for sample preparation (RNA extraction, amplification and sample labelling), hybridization and detection, thus leading to a high variability between several approaches and resulting in the necessity of extensive standardization and normalization procedures. In the present work a custom designed human proteinase DNA microarray of lower density in ArrayTube format was established. This highly economic open platform only requires standard laboratory equipment and allows the study of the molecular regulation of cell behaviour by proteinases. We established a procedure for sample preparation and hybridization and verified the array based gene expression profile by quantitative real-time PCR (QRT-PCR). Moreover, we compared the results with the well established Affymetrix microarray. By application of standard labelling procedures with e.g. Klenow fragment exo-, single primer amplification (SPA) or In Vitro Transcription (IVT) we noticed a loss of signal conservation for some genes. To overcome this problem we developed a protocol in accordance with the SPA protocol, in which we included target specific primers designed individually for each spotted oligomer. Here we present a complete array based assay in which only the specific transcripts of interest are amplified in parallel and in a linear manner. The array represents a proof of principle which can be adapted to other species as well. As the designed protocol for amplifying mRNA starts from as little as 100 ng total RNA, it presents an alternative method for detecting even low expressed genes by microarray experiments in a highly reproducible and sensitive manner. Preservation of signal integrity is demonstrated out by QRT-PCR measurements. The little amounts of total RNA necessary for the analyses make this method applicable for investigations with limited material as in clinical samples from, for example, organ or tumour biopsies. Those are arguments in favour of the high potential of our assay compared to established procedures for amplification within the field of diagnostic expression profiling. Nevertheless, the screening character of microarray data must be mentioned, and independent methods should verify the results.

Customized vaginal vault brachytherapy with computed tomography imaging-derived applicator prototyping.

PubMed

Wiebe, Ericka; Easton, Harry; Thomas, Gillian; Barbera, Lisa; D'Alimonte, Laura; Ravi, Ananth

2015-01-01

A novel customized vaginal brachytherapy mould technique has been developed for clinical use. This image-guided technique provides a brachytherapy applicator solution for irregular vaginal vault configuration and/or a wide vaginal apex relative to the vaginal introitus that would be sub-optimally treated with standard cylinders. The customized vaginal applicator is generated by the following process: CT images are obtained with contrast-soaked vaginal packing in situ to highlight unique anatomical detail. A 3-dimensional digital model is developed from the images and subsequently converted into a custom applicator with the use of stereolithography, which is an additive manufacturing technique whereby layers 50-100 μm thick of resin are deposited and polymerized using a laser to create intricate 3-dimensional objects. The density of the applicator and the dose delivered using the custom applicator were both measured to ensure accurate dosimetry. The CT-based densities of a clinical vaginal cylinder and the cylinder generated using stereolithography were 1.29 ± 0.06 g/cm(3) vs 1.28 ± 0.01 g/cm(3), respectively. The mean measured dose from a representative stereolithographed applicator normalized to dose measured for a single plastic catheter was 99.8 ± 4.2%. In patient dosimetric results indicate improved coverage of the lateral aspect of vaginal vault with the custom cylinder relative to the standard cylinder; 700 cGy vs 328 cGy, respectively, at a representative lateral vaginal dose point, while simultaneously achieving relatively narrow dose distribution in the anterior/posterior direction. Stereolithographic applicator production was available within a clinically acceptable timeframe, and its clinical feasibility and utility has been demonstrated. Copyright © 2015 American Brachytherapy Society. Published by Elsevier Inc. All rights reserved.

75 FR 74082 - Agency Information Collection Activities: Proposed Collection; Comments Requested

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-30

... of information collection under review: customer satisfaction surveys. The Department of Justice (DOJ... collection. (2) Title of the Form/Collection: Customer Satisfaction Surveys. (3) Agency form number, if any... program-specific customer satisfaction surveys to more effectively capture customer perception...

Forecasting the value of credit scoring

NASA Astrophysics Data System (ADS)

Saad, Shakila; Ahmad, Noryati; Jaffar, Maheran Mohd

2017-08-01

Nowadays, credit scoring system plays an important role in banking sector. This process is important in assessing the creditworthiness of customers requesting credit from banks or other financial institutions. Usually, the credit scoring is used when customers send the application for credit facilities. Based on the score from credit scoring, bank will be able to segregate the "good" clients from "bad" clients. However, in most cases the score is useful at that specific time only and cannot be used to forecast the credit worthiness of the same applicant after that. Hence, bank will not know if "good" clients will always be good all the time or "bad" clients may become "good" clients after certain time. To fill up the gap, this study proposes an equation to forecast the credit scoring of the potential borrowers at a certain time by using the historical score related to the assumption. The Mean Absolute Percentage Error (MAPE) is used to measure the accuracy of the forecast scoring. Result shows the forecast scoring is highly accurate as compared to actual credit scoring.

Low cost microminiature refrigerators for large unit volume applications

NASA Technical Reports Server (NTRS)

Duboc, R. M., Jr.

1983-01-01

Photolithographic techniques were employed to fabricate small Joule-Thomson refrigerators in laminated substrates. The gas passages of a J-T refrigerator are formed by etching channels as narrow as 50 microns and as shallow as 5 microns in glass plates which are laminated together. Circular refrigerators on the order of 1.5 centimeters in diameter and .75 millimeters thick were produced which cool down to cryogenic temperatures in a few seconds, using Argon or Nitrogen, with no vacuum or radiation insulation. Smaller refrigerators are developed for both faster cooldown and low refrigeration capacity applications. By using this technology, custom refrigerators can be designed to meet specific application requirements.

The Open System Interconnection as a building block in a health sciences information network.

PubMed Central

Boss, R W

1985-01-01

The interconnection of integrated health sciences library systems with other health sciences computer systems to achieve information networks will require either custom linkages among specific devices or the adoption of standards that all systems support. The most appropriate standards appear to be those being developed under the Open System Interconnection (OSI) reference model, which specifies a set of rules and functions that computers must follow to exchange information. The protocols have been modularized into seven different layers. The lowest three layers are generally available as off-the-shelf interfacing products. The higher layers require special development for particular applications. This paper describes the OSI, its application in health sciences networks, and specific tasks that remain to be undertaken. PMID:4052672

19 CFR 146.52 - Manipulation, manufacture, exhibition or destruction; Customs Form 216.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 2 2010-04-01 2010-04-01 false Manipulation, manufacture, exhibition or... Merchandise in a Zone § 146.52 Manipulation, manufacture, exhibition or destruction; Customs Form 216. (a... application) on Customs Form 216 for permission to manipulate, manufacture, exhibit, or destroy merchandise in...

Elicitation of Unstated Needs

DTIC Science & Technology

2014-09-17

what you can about requirements for a next generation laptop for the Home User that • attracts new customers • leverages existing customer loyalty ...Training © 2014 Carnegie Mellon University Traditional Requirements Elicitation Approaches Interviews of customers /users to elicit problems and usage...needs Inventory of problem reporting systems harboring customer complaints Solicitation of specification from customers /users to build a system

Web-based Data Exploration, Exploitation and Visualization Tools for Satellite Sensor VIS/IR Calibration Applications

NASA Astrophysics Data System (ADS)

Gopalan, A.; Doelling, D. R.; Scarino, B. R.; Chee, T.; Haney, C.; Bhatt, R.

2016-12-01

The CERES calibration group at NASA/LaRC has developed and deployed a suite of online data exploration and visualization tools targeted towards a range of spaceborne VIS/IR imager calibration applications for the Earth Science community. These web-based tools are driven by the open-source R (Language for Statistical Computing and Visualization) with a web interface for the user to customize the results according to their application. The tool contains a library of geostationary and sun-synchronous imager spectral response functions (SRF), incoming solar spectra, SCIAMACHY and Hyperion Earth reflected visible hyper-spectral data, and IASI IR hyper-spectral data. The suite of six specific web-based tools was designed to provide critical information necessary for sensor cross-calibration. One of the challenges of sensor cross-calibration is accounting for spectral band differences and may introduce biases if not handled properly. The spectral band adjustment factors (SBAF) are a function of the earth target, atmospheric and cloud conditions or scene type and angular conditions, when obtaining sensor radiance pairs. The SBAF will need to be customized for each inter-calibration target and sensor pair. The advantages of having a community open source tool are: 1) only one archive of SCIAMACHY, Hyperion, and IASI datasets needs to be maintained, which is on the order of 50TB. 2) the framework will allow easy incorporation of new satellite SRFs and hyper-spectral datasets and associated coincident atmospheric and cloud properties, such as PW. 3) web tool or SBAF algorithm improvements or suggestions when incorporated can benefit the community at large. 4) The customization effort is on the user rather than on the host. In this paper we discuss each of these tools in detail and explore the variety of advanced options that can be used to constrain the results along with specific use cases to highlight the value-added by these datasets.

Dopant-specific unzipping of carbon nanotubes for intact crystalline graphene nanostructures

PubMed Central

Lim, Joonwon; Narayan Maiti, Uday; Kim, Na-Young; Narayan, Rekha; Jun Lee, Won; Sung Choi, Dong; Oh, Youngtak; Min Lee, Ju; Yong Lee, Gil; Hun Kang, Seok; Kim, Hyunwoo; Kim, Yong-Hyun; Ouk Kim, Sang

2016-01-01

Atomic level engineering of graphene-based materials is in high demand to enable customize structures and properties for different applications. Unzipping of the graphene plane is a potential means to this end, but uncontrollable damage of the two-dimensional crystalline framework during harsh unzipping reaction has remained a key challenge. Here we present heteroatom dopant-specific unzipping of carbon nanotubes as a reliable and controllable route to customized intact crystalline graphene-based nanostructures. Substitutional pyridinic nitrogen dopant sites at carbon nanotubes can selectively initiate the unzipping of graphene side walls at a relatively low electrochemical potential (0.6 V). The resultant nanostructures consisting of unzipped graphene nanoribbons wrapping around carbon nanotube cores maintain the intact two-dimensional crystallinity with well-defined atomic configuration at the unzipped edges. Large surface area and robust electrical connectivity of the synergistic nanostructure demonstrate ultrahigh-power supercapacitor performance, which can serve for AC filtering with the record high rate capability of −85° of phase angle at 120 Hz. PMID:26796993

77 FR 37919 - Agency Information Collection Activities: Proposed Collection; Comments Requested: National...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-25

... Customer Satisfaction Survey ACTION: 60-Day Notice of Information Collection Under Review. The Department.../Collection: National Response Team Customer Satisfaction Survey. (3) Agency form number, if any, and the...- specific customer satisfaction survey to more effectively capture customer perception/satisfaction of...

Knowledge-based approach for generating target system specifications from a domain model

NASA Technical Reports Server (NTRS)

Gomaa, Hassan; Kerschberg, Larry; Sugumaran, Vijayan

1992-01-01

Several institutions in industry and academia are pursuing research efforts in domain modeling to address unresolved issues in software reuse. To demonstrate the concepts of domain modeling and software reuse, a prototype software engineering environment is being developed at George Mason University to support the creation of domain models and the generation of target system specifications. This prototype environment, which is application domain independent, consists of an integrated set of commercial off-the-shelf software tools and custom-developed software tools. This paper describes the knowledge-based tool that was developed as part of the environment to generate target system specifications from a domain model.

IsoWAN: A NASA Science and Engineering Information and Services Framework

NASA Technical Reports Server (NTRS)

Korsmeyer, David J.; Chow, Edward T.; Conroy, Michael P.; Swanson, Keith (Technical Monitor)

2000-01-01

We believe that the next evolutionary step in supporting wide-area application and services delivery to customers is a network framework that provides for collocation of applications and services at distinct sites in the network, an interconnection between these sites that is performance optimized for these applications, and value-added services for applications. We use the term IsoWAN to describe an advanced, isolated network interconnect services framework that will enable applications to be more secure, and able to access and be in use in both local and remote environments. The main functions of an IsoWAN are virtual localization of application services, an application service interface, coordinated delivery of applications and associated data to the customer, and supporting collaborative application development for customers. An initial pilot network between three NASA Centers: Ames Research Center, the Jet Propulsion Laboratory, and Marshall Space Flight Center, has been built and its properties will be discussed.

Toward a patient-specific tissue engineered vascular graft

PubMed Central

Best, Cameron; Strouse, Robert; Hor, Kan; Pepper, Victoria; Tipton, Amy; Kelly, John; Shinoka, Toshiharu; Breuer, Christopher

2018-01-01

Integrating three-dimensional printing with the creation of tissue-engineered vascular grafts could provide a readily available, patient-specific, autologous tissue source that could significantly improve outcomes in newborns with congenital heart disease. Here, we present the recent case of a candidate for our tissue-engineered vascular graft clinical trial deemed ineligible due to complex anatomical requirements and consider the application of three-dimensional printing technologies for a patient-specific graft. We 3D-printed a closed-disposable seeding device and validated that it performed equivalently to the traditional open seeding technique using ovine bone marrow–derived mononuclear cells. Next, our candidate’s preoperative imaging was reviewed to propose a patient-specific graft. A seeding apparatus was then designed to accommodate the custom graft and 3D-printed on a commodity fused deposition modeler. This exploratory feasibility study represents an important proof of concept advancing progress toward a rationally designed patient-specific tissue-engineered vascular graft for clinical application. PMID:29568478

19 CFR 133.13 - Documents and fee to accompany application.

Code of Federal Regulations, 2010 CFR

2010-04-01

... Section 133.13 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY... persons not associated with or related to the applicant but having actual knowledge of the facts, stating that to his best knowledge and belief: (1) The applicant has used the trade name in connection with the...

Data mining learning bootstrap through semantic thumbnail analysis

NASA Astrophysics Data System (ADS)

Battiato, Sebastiano; Farinella, Giovanni Maria; Giuffrida, Giovanni; Tribulato, Giuseppe

2007-01-01

The rapid increase of technological innovations in the mobile phone industry induces the research community to develop new and advanced systems to optimize services offered by mobile phones operators (telcos) to maximize their effectiveness and improve their business. Data mining algorithms can run over data produced by mobile phones usage (e.g. image, video, text and logs files) to discover user's preferences and predict the most likely (to be purchased) offer for each individual customer. One of the main challenges is the reduction of the learning time and cost of these automatic tasks. In this paper we discuss an experiment where a commercial offer is composed by a small picture augmented with a short text describing the offer itself. Each customer's purchase is properly logged with all relevant information. Upon arrival of new items we need to learn who the best customers (prospects) for each item are, that is, the ones most likely to be interested in purchasing that specific item. Such learning activity is time consuming and, in our specific case, is not applicable given the large number of new items arriving every day. Basically, given the current customer base we are not able to learn on all new items. Thus, we need somehow to select among those new items to identify the best candidates. We do so by using a joint analysis between visual features and text to estimate how good each new item could be, that is, whether or not is worth to learn on it. Preliminary results show the effectiveness of the proposed approach to improve classical data mining techniques.

The Student-Customer Orientation Questionnaire (SCOQ): Application of Customer Metaphor to Higher Education

ERIC Educational Resources Information Center

Koris, Riina; Nokelainen, Petri

2015-01-01

Purpose: The purpose of this paper is to study Bayesian dependency modelling (BDM) to validate the model of educational experiences and the student-customer orientation questionnaire (SCOQ), and to identify the categories of educatonal experience in which students expect a higher educational institutions (HEI) to be student-customer oriented.…

Image once, print thrice? Three-dimensional printing of replacement parts.

PubMed

Rankin, Timothy M; Wormer, Blair A; Miller, John D; Giovinco, Nicholas A; Al Kassis, Salam; Armstrong, David G

2018-02-01

The last 20 years has seen an exponential increase in 3D printing as it pertains to the medical industry and more specifically surgery. Previous reviews in this domain have chosen to focus on applications within a specific field. To our knowledge, none have evaluated the broad applications of patient-specific or digital imaging and communications in medicine (DICOM) derived applications of this technology. We searched PUBMED and CINAHL from April 2012 to April 2017. 261 studies fulfilled the inclusion criteria. Proportions of articles reviewed: DICOM (5%), CT (38%), MRI (20%), Ultrasonography (28%), and Bio-printing (9%). There is level IV evidence to support the use of 3D printing for education, pre-operative planning, simulation and implantation. In order to make this technology widely applicable, it will require automation of DICOM to standard tessellation language to implant. Advances in knowledge: Recent lapses in intellectual property and greater familiarity with rapid prototyping in medicine has set the stage for the next generation of custom implants, simulators and autografts. Radiologists may be able to help establish reimbursable procedural terminology.

15 CFR 291.4 - National industry-specific pollution prevention and environmental compliance resource centers.

Code of Federal Regulations, 2010 CFR

2010-01-01

..., external evaluation for assessing outcomes of the activity, and “customer satisfaction” measures of... requirements. (d) Project customers. (1) The customers for this center will be the businesses in the industrial...) The center should assist the customer in choosing the most cost- effective, environmentally sound...

75 FR 69791 - Risk Management Controls for Brokers or Dealers With Market Access

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-15

... relationship with the ultimate customer, can more effectively implement them. In addition, a broker or dealer... specific risk management controls and supervisory procedures to a customer that is a registered broker... such customer, based on its position in the transaction and relationship with the ultimate customer...

Analysis on online word-of-mouth of customer satisfaction in cultural and creative industries of Taiwan: using cultural heritage application and performance facilities as examples

NASA Astrophysics Data System (ADS)

Tsai, Li-Fen; Shaw, Jing-Chi; Wang, Pei-Wen; Shih, Meng-Long; Su, Yi-Jing

2011-10-01

This study aims to probe into customers' online word-of-mouth regarding cultural heritage applications and performance facilities in Cultural and Creative Industries. Findings demonstrate that, regarding online word-of-mouth for art museums, museums, and art villages, items valued by customers are design aesthetics of displays and collections, educational functions, and environments and landscapes. The percentages are 10.102%, 11.208% and 11.44%, respectively. In addition, cultural heritage applications and performance facility industries in Taiwan are highly valued in online word-of-mouth.

Alternative power supply systems for remote industrial customers

NASA Astrophysics Data System (ADS)

Kharlamova, N. V.; Khalyasmaa, A. I.; Eroshenko, S. A.

2017-06-01

The paper addresses the problem of alternative power supply of remote industrial clusters with renewable electric energy generation. As a result of different technologies comparison, consideration is given to wind energy application. The authors present a methodology of mean expected wind generation output calculation, based on Weibull distribution, which provides an effective express-tool for preliminary assessment of required installed generation capacity. The case study is based on real data including database of meteorological information, relief characteristics, power system topology etc. Wind generation feasibility estimation for a specific territory is followed by power flow calculations using Monte Carlo methodology. Finally, the paper provides a set of recommendations to ensure safe and reliable power supply for the final customers and, subsequently, to provide sustainable development of the regions, located far from megalopolises and industrial centres.

Artificial Muscle (AM) Cilia Array for Underwater Systems

DTIC Science & Technology

2016-12-15

structures, including cilia-like structures. Specifically, a custom 3D printer was created that utilizes custom-made Nafion filament for 30 printing of custom... printing ) of IPMC material to create custom-shaped AM structures, including cilia-like structures. Various custom-shaped AM structures were fabricated via...integrating square cross-section IPMC actuators with a printed circuit board power delivery system. IV. Concise Accomplishments Performance

Satellite provided customer premise services: A forecast of potential domestic demand through the year 2000. Volume 3: Appendices

NASA Technical Reports Server (NTRS)

Kratochvil, D.; Bowyer, J.; Bhushan, C.; Steinnagel, K.; Kaushal, D.; Al-Kinani, G.

1983-01-01

Voice applications, data applications, video applications, impacted baseline forecasts, market distribution, potential CPS (customers premises services) user classes, net long haul forecasts, CPS cost analysis, overall satellite forecast, CPS satellite market, Ka-band CPS satellite forecast, nationwide traffic distribution model, and intra-urban topology are discussed.

Satellite provided customer premise services: A forecast of potential domestic demand through the year 2000. Volume 3: Appendices

NASA Astrophysics Data System (ADS)

Kratochvil, D.; Bowyer, J.; Bhushan, C.; Steinnagel, K.; Kaushal, D.; Al-Kinani, G.

1983-08-01

Voice applications, data applications, video applications, impacted baseline forecasts, market distribution, potential CPS (customers premises services) user classes, net long haul forecasts, CPS cost analysis, overall satellite forecast, CPS satellite market, Ka-band CPS satellite forecast, nationwide traffic distribution model, and intra-urban topology are discussed.

StreamStats in Georgia: a water-resources web application

USGS Publications Warehouse

Gotvald, Anthony J.; Musser, Jonathan W.

2015-07-31

StreamStats is being implemented on a State-by-State basis to allow for customization of the data development and underlying datasets to address their specific needs, issues, and objectives. The USGS, in cooperation with the Georgia Environmental Protection Division and Georgia Department of Transportation, has implemented StreamStats for Georgia. The Georgia StreamStats Web site is available through the national StreamStats Web-page portal at http://streamstats.usgs.gov. Links are provided on this Web page for individual State applications, instructions for using StreamStats, definitions of basin characteristics and streamflow statistics, and other supporting information.

User's Manual for the Langley Aerothermodynamic Upwind Relaxation Algorithm (LAURA)

NASA Technical Reports Server (NTRS)

Gnoffo, Peter A.; Cheatwood, F. McNeil

1996-01-01

This user's manual provides detailed instructions for the installation and the application of version 4.1 of the Langley Aerothermodynamic Upwind Relaxation Algorithm (LAURA). Also provides simulation of flow field in thermochemical nonequilibrium around vehicles traveling at hypersonic velocities through the atmosphere. Earlier versions of LAURA were predominantly research codes, and they had minimal (or no) documentation. This manual describes UNIX-based utilities for customizing the code for special applications that also minimize system resource requirements. The algorithm is reviewed, and the various program options are related to specific equations and variables in the theoretical development.

19 CFR 206.1 - Applicability of part.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 3 2011-04-01 2011-04-01 false Applicability of part. 206.1 Section 206.1 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION NONADJUDICATIVE INVESTIGATIONS INVESTIGATIONS RELATING TO GLOBAL AND BILATERAL SAFEGUARD ACTIONS, MARKET DISRUPTION, TRADE DIVERSION, AND REVIEW OF...

19 CFR 206.61 - Applicability of subpart.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 19 Customs Duties 3 2014-04-01 2014-04-01 false Applicability of subpart. 206.61 Section 206.61 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION NONADJUDICATIVE INVESTIGATIONS INVESTIGATIONS RELATING TO GLOBAL AND BILATERAL SAFEGUARD ACTIONS, MARKET DISRUPTION, TRADE DIVERSION, AND REVIEW OF...

19 CFR 206.1 - Applicability of part.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 19 Customs Duties 3 2014-04-01 2014-04-01 false Applicability of part. 206.1 Section 206.1 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION NONADJUDICATIVE INVESTIGATIONS INVESTIGATIONS RELATING TO GLOBAL AND BILATERAL SAFEGUARD ACTIONS, MARKET DISRUPTION, TRADE DIVERSION, AND REVIEW OF...

19 CFR 206.1 - Applicability of part.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 19 Customs Duties 3 2013-04-01 2013-04-01 false Applicability of part. 206.1 Section 206.1 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION NONADJUDICATIVE INVESTIGATIONS INVESTIGATIONS RELATING TO GLOBAL AND BILATERAL SAFEGUARD ACTIONS, MARKET DISRUPTION, TRADE DIVERSION, AND REVIEW OF...

19 CFR 206.61 - Applicability of subpart.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 19 Customs Duties 3 2013-04-01 2013-04-01 false Applicability of subpart. 206.61 Section 206.61 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION NONADJUDICATIVE INVESTIGATIONS INVESTIGATIONS RELATING TO GLOBAL AND BILATERAL SAFEGUARD ACTIONS, MARKET DISRUPTION, TRADE DIVERSION, AND REVIEW OF...

19 CFR 206.1 - Applicability of part.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 19 Customs Duties 3 2012-04-01 2012-04-01 false Applicability of part. 206.1 Section 206.1 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION NONADJUDICATIVE INVESTIGATIONS INVESTIGATIONS RELATING TO GLOBAL AND BILATERAL SAFEGUARD ACTIONS, MARKET DISRUPTION, TRADE DIVERSION, AND REVIEW OF...

19 CFR 206.41 - Applicability of subpart.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 19 Customs Duties 3 2014-04-01 2014-04-01 false Applicability of subpart. 206.41 Section 206.41 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION NONADJUDICATIVE INVESTIGATIONS INVESTIGATIONS RELATING TO GLOBAL AND BILATERAL SAFEGUARD ACTIONS, MARKET DISRUPTION, TRADE DIVERSION, AND REVIEW OF...

19 CFR 206.31 - Applicability of subpart.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 19 Customs Duties 3 2013-04-01 2013-04-01 false Applicability of subpart. 206.31 Section 206.31 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION NONADJUDICATIVE INVESTIGATIONS INVESTIGATIONS RELATING TO GLOBAL AND BILATERAL SAFEGUARD ACTIONS, MARKET DISRUPTION, TRADE DIVERSION, AND REVIEW OF...

19 CFR 206.31 - Applicability of subpart.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 19 Customs Duties 3 2014-04-01 2014-04-01 false Applicability of subpart. 206.31 Section 206.31 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION NONADJUDICATIVE INVESTIGATIONS INVESTIGATIONS RELATING TO GLOBAL AND BILATERAL SAFEGUARD ACTIONS, MARKET DISRUPTION, TRADE DIVERSION, AND REVIEW OF...

19 CFR 206.41 - Applicability of subpart.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 19 Customs Duties 3 2013-04-01 2013-04-01 false Applicability of subpart. 206.41 Section 206.41 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION NONADJUDICATIVE INVESTIGATIONS INVESTIGATIONS RELATING TO GLOBAL AND BILATERAL SAFEGUARD ACTIONS, MARKET DISRUPTION, TRADE DIVERSION, AND REVIEW OF...

19 CFR 206.21 - Applicability of subpart.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 19 Customs Duties 3 2013-04-01 2013-04-01 false Applicability of subpart. 206.21 Section 206.21 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION NONADJUDICATIVE INVESTIGATIONS INVESTIGATIONS RELATING TO GLOBAL AND BILATERAL SAFEGUARD ACTIONS, MARKET DISRUPTION, TRADE DIVERSION, AND REVIEW OF...

19 CFR 206.21 - Applicability of subpart.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 19 Customs Duties 3 2014-04-01 2014-04-01 false Applicability of subpart. 206.21 Section 206.21 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION NONADJUDICATIVE INVESTIGATIONS INVESTIGATIONS RELATING TO GLOBAL AND BILATERAL SAFEGUARD ACTIONS, MARKET DISRUPTION, TRADE DIVERSION, AND REVIEW OF...

19 CFR 206.21 - Applicability of subpart.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 3 2010-04-01 2010-04-01 false Applicability of subpart. 206.21 Section 206.21 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION NONADJUDICATIVE INVESTIGATIONS INVESTIGATIONS RELATING TO GLOBAL AND BILATERAL SAFEGUARD ACTIONS, MARKET DISRUPTION, TRADE DIVERSION, AND REVIEW OF...

19 CFR 206.11 - Applicability of subpart.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 3 2010-04-01 2010-04-01 false Applicability of subpart. 206.11 Section 206.11 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION NONADJUDICATIVE INVESTIGATIONS INVESTIGATIONS RELATING TO GLOBAL AND BILATERAL SAFEGUARD ACTIONS, MARKET DISRUPTION, TRADE DIVERSION, AND REVIEW OF...

19 CFR 206.61 - Applicability of subpart.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 3 2010-04-01 2010-04-01 false Applicability of subpart. 206.61 Section 206.61 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION NONADJUDICATIVE INVESTIGATIONS INVESTIGATIONS RELATING TO GLOBAL AND BILATERAL SAFEGUARD ACTIONS, MARKET DISRUPTION, TRADE DIVERSION, AND REVIEW OF...

19 CFR 206.51 - Applicability of subpart.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 3 2010-04-01 2010-04-01 false Applicability of subpart. 206.51 Section 206.51 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION NONADJUDICATIVE INVESTIGATIONS INVESTIGATIONS RELATING TO GLOBAL AND BILATERAL SAFEGUARD ACTIONS, MARKET DISRUPTION, TRADE DIVERSION, AND REVIEW OF...

19 CFR 206.1 - Applicability of part.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 3 2010-04-01 2010-04-01 false Applicability of part. 206.1 Section 206.1 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION NONADJUDICATIVE INVESTIGATIONS INVESTIGATIONS RELATING TO GLOBAL AND BILATERAL SAFEGUARD ACTIONS, MARKET DISRUPTION, TRADE DIVERSION, AND REVIEW OF...

19 CFR 206.31 - Applicability of subpart.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 3 2010-04-01 2010-04-01 false Applicability of subpart. 206.31 Section 206.31 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION NONADJUDICATIVE INVESTIGATIONS INVESTIGATIONS RELATING TO GLOBAL AND BILATERAL SAFEGUARD ACTIONS, MARKET DISRUPTION, TRADE DIVERSION, AND REVIEW OF...

Teaching Customer-Centric Operations Management--Evidence from an Experiential Learning-Oriented Mass Customisation Class

ERIC Educational Resources Information Center

Medini, Khaled

2018-01-01

The increase of individualised customer demands and tough competition in the manufacturing sector gave rise to more customer-centric operations management such as products and services (mass) customisation. Mass customisation (MC), which inherits the "economy of scale" from mass production (MP), aims to meet specific customer demands…

Impact of Perceived Website Service Quality on Customer E-Loyalty on a Lodging Website

ERIC Educational Resources Information Center

Jeon, Myunghee

2009-01-01

Customer loyalty on websites, "e-loyalty", is reflected on customer behavior, regardless of online or offline business. Specifically, it is believed that customer loyalty on a website is strongly associated with website service quality. This study rigorously reviewed previously reported research in the website service quality dimensions and…

Critical Success Factors of Internet Shopping: The Case of Japan

NASA Astrophysics Data System (ADS)

Atchariyachanvanich, Kanokwan; Okada, Hitoshi; Sonehara, Noboru

This paper presents the results from a study conducted on the effect of differing factors on a customer's attitude towards using Internet shopping in Japan. The research model used was an extended version of the consumers' acceptance of virtual stores model with the addition of a new factor, need specificity, and a grouping of critical success factors based on their customer-centric and website-centric viewpoints sources. It examines how differences in the individual characteristics of customers affect the actual use of Internet shopping. According to an online questionnaire filled out by 1,215 online customers used to conduct a multiple regression analysis and a structural equation modeling analysis, the participant's gender, education level, innovativeness, net-orientation, and need specificity, which are the factors for the customer-centric viewpoints, have a positive impact on the actual use of Internet shopping. The implication also shows that Japanese online customers do not worry about the quality of service of Internet shopping, a factor in the website-centric viewpoint, as significantly as offline customers do.

Effects of Platform Design on the Customer Experience in an Online Solar PV Marketplace

DOE Office of Scientific and Technical Information (OSTI.GOV)

OShaughnessy, Eric J.; Margolis, Robert M.; Leibowicz, Benjamin

We analyze a unique dataset of residential solar PV quotes offered in an online marketplace to understand how platform design changes affect customer outcomes. Three of the four design changes are associated with statistically significant and robust reductions in offer prices, though none of the policies were designed explicitly to reduce prices. The results suggest that even small changes in how prospective solar PV customers interact with installers can affect customer outcomes such as prices. Specifically, the four changes we evaluate are: 1) a customer map that shows potential new EnergySage registrants the locations of nearby customers; 2) a quotemore » cap that precludes more than seven installers from bidding on any one customer; 3) a price guidance feature that informs installers about competitive prices in the customer's market before they submit quotes; and 4) no pre-quote messaging to prohibit installers from contacting customers prior to offering quotes. We calculate descriptive statistics to investigate whether each design change accomplished its specific objectives. Then, we econometrically evaluate the impacts of the design changes on PV quote prices and purchase prices using a regression discontinuity approach.« less

Standalone Mobile Application for Shipping Services Based on Geographic Information System and A-Star Algorithm

NASA Astrophysics Data System (ADS)

Gunawan, D.; Marzuki, I.; Candra, A.

2018-03-01

Geographic Information Systems (GIS) plays an essential role in shipping service related application. By utilizing GIS, the courier can find the route to deliver goods for its customer. This research proposes a standalone mobile application to provide the shortest route to the destinations by utilizing geographic information systems with A-Star algorithm. This application is intended to be used although the area has no Internet network available. The developed application can handle several drop off points then calculates the shortest route that passes through all the drop off points. According to the conducted testing, the number of drop off points that can be calculated is influenced by the specification of the smartphone. More destinations require more smartphone resources and time to process.

Customer Relationship Management.

ERIC Educational Resources Information Center

Fayerman, Michael

2002-01-01

Presents an approach increasingly employed by businesses to track and respond to their customers to provide better and faster services: customer relationship management. Discusses its applicability to the operations of higher education and institutional research and the role it plays in the knowledge management framework. (EV)

Knowledge Data Base for Amorphous Metals

DTIC Science & Technology

2007-07-26

not programmatic, updates. Over 100 custom SQL statements that maintain the domain specific data are attached to the workflow entries in a generic...for the form by populating the SQL and run generation tables. Application data may be prepared in different ways for two steps that invoke the same form...run generation mode). There is a single table of SQL commands. Each record has a user-definable ID, the SQL code, and a comment. The run generation

Flush Mounting Of Thin-Film Sensors

NASA Technical Reports Server (NTRS)

Moore, Thomas C., Sr.

1992-01-01

Technique developed for mounting thin-film sensors flush with surfaces like aerodynamic surfaces of aircraft, which often have compound curvatures. Sensor mounted in recess by use of vacuum pad and materials selected for specific application. Technique involves use of materials tailored to thermal properties of substrate in which sensor mounted. Together with customized materials, enables flush mounting of thin-film sensors in most situations in which recesses for sensors provided. Useful in both aircraft and automotive industries.

Defense Industrial Base Assessment: U.S. Integrated Circuit Design and Fabrication Capability

DTIC Science & Technology

2009-05-01

in the U.S for the period 2003-2006, with projections to 2011.6 The resulting draft OTE survey was field tested for accuracy and usability with a...custom application specific integrated circuits (ASICs) to field programmable gate arrays (FPGAs). Companies of all sizes can manufacture these IC...able to design one-time Electronically Programmable Gate Arrays (EPGAs) while nine are able to design Field Programmable Gate Arrays (FPGAs). Eight

VisPort: Web-Based Access to Community-Specific Visualization Functionality [Shedding New Light on Exploding Stars: Visualization for TeraScale Simulation of Neutrino-Driven Supernovae (Final Technical Report)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Baker, M Pauline

2007-06-30

The VisPort visualization portal is an experiment in providing Web-based access to visualization functionality from any place and at any time. VisPort adopts a service-oriented architecture to encapsulate visualization functionality and to support remote access. Users employ browser-based client applications to choose data and services, set parameters, and launch visualization jobs. Visualization products typically images or movies are viewed in the user's standard Web browser. VisPort emphasizes visualization solutions customized for specific application communities. Finally, VisPort relies heavily on XML, and introduces the notion of visualization informatics - the formalization and specialization of information related to the process and productsmore » of visualization.« less

CheD: chemical database compilation tool, Internet server, and client for SQL servers.

PubMed

Trepalin, S V; Yarkov, A V

2001-01-01

An efficient program, which runs on a personal computer, for the storage, retrieval, and processing of chemical information, is presented, The program can work both as a stand-alone application or in conjunction with a specifically written Web server application or with some standard SQL servers, e.g., Oracle, Interbase, and MS SQL. New types of data fields are introduced, e.g., arrays for spectral information storage, HTML and database links, and user-defined functions. CheD has an open architecture; thus, custom data types, controls, and services may be added. A WWW server application for chemical data retrieval features an easy and user-friendly installation on Windows NT or 95 platforms.

19 CFR 206.32 - Definitions applicable to subpart D.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 19 Customs Duties 3 2013-04-01 2013-04-01 false Definitions applicable to subpart D. 206.32 Section 206.32 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION NONADJUDICATIVE INVESTIGATIONS INVESTIGATIONS RELATING TO GLOBAL AND BILATERAL SAFEGUARD ACTIONS, MARKET DISRUPTION, TRADE DIVERSION, AND REVIEW...

19 CFR 206.32 - Definitions applicable to subpart D.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 19 Customs Duties 3 2014-04-01 2014-04-01 false Definitions applicable to subpart D. 206.32 Section 206.32 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION NONADJUDICATIVE INVESTIGATIONS INVESTIGATIONS RELATING TO GLOBAL AND BILATERAL SAFEGUARD ACTIONS, MARKET DISRUPTION, TRADE DIVERSION, AND REVIEW...

19 CFR 206.22 - Definition applicable to subpart C.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 19 Customs Duties 3 2013-04-01 2013-04-01 false Definition applicable to subpart C. 206.22 Section 206.22 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION NONADJUDICATIVE INVESTIGATIONS INVESTIGATIONS RELATING TO GLOBAL AND BILATERAL SAFEGUARD ACTIONS, MARKET DISRUPTION, TRADE DIVERSION, AND REVIEW...

19 CFR 206.22 - Definition applicable to subpart C.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 19 Customs Duties 3 2014-04-01 2014-04-01 false Definition applicable to subpart C. 206.22 Section 206.22 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION NONADJUDICATIVE INVESTIGATIONS INVESTIGATIONS RELATING TO GLOBAL AND BILATERAL SAFEGUARD ACTIONS, MARKET DISRUPTION, TRADE DIVERSION, AND REVIEW...

19 CFR 206.22 - Definition applicable to subpart C.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 3 2010-04-01 2010-04-01 false Definition applicable to subpart C. 206.22 Section 206.22 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION NONADJUDICATIVE INVESTIGATIONS INVESTIGATIONS RELATING TO GLOBAL AND BILATERAL SAFEGUARD ACTIONS, MARKET DISRUPTION, TRADE DIVERSION, AND REVIEW...

19 CFR 206.32 - Definitions applicable to subpart D.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 3 2010-04-01 2010-04-01 false Definitions applicable to subpart D. 206.32 Section 206.32 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION NONADJUDICATIVE INVESTIGATIONS INVESTIGATIONS RELATING TO GLOBAL AND BILATERAL SAFEGUARD ACTIONS, MARKET DISRUPTION, TRADE DIVERSION, AND REVIEW...

A custom acoustic emission monitoring system for harsh environments: application to freezing-induced damage in alpine rock-walls

NASA Astrophysics Data System (ADS)

Girard, L.; Beutel, J.; Gruber, S.; Hunziker, J.; Lim, R.; Weber, S.

2012-06-01

We present a custom acoustic emission (AE) monitoring system designed to perform long-term measurements on high-alpine rock-walls. AE monitoring is a common technique for characterizing damage evolution in solid materials. The system is based on a two-channel AE sensor node (AE-node) integrated into a Wireless Sensor Network (WSN) customized for operation in harsh environments. This wireless architecture offers flexibility in the deployment of AE-nodes at any position of the rock-wall that needs to be monitored, within a range of a few hundred meters from a core station connected to the internet. The system achieves near real-time data delivery and allows the user to remotely control the AE detection threshold. In order to protect AE sensors and capture acoustic signals from specific depths of the rock-wall, a special casing was developed. The monitoring system is completed by two probes that measure rock temperature and liquid water content, both probes being also integrated into the WSN. We report a first deployment of the monitoring system on a rock-wall at Jungfraujoch, 3500 m a.s.l., Switzerland. While this first deployment of the monitoring system aims to support fundamental research on processes that damage rock under cold climate, the system could serve a number of other applications, including rock-fall hazard surveillance or structural monitoring of concrete structures.

A custom acoustic emission monitoring system for harsh environments: application to freezing-induced damage in alpine rock walls

NASA Astrophysics Data System (ADS)

Girard, L.; Beutel, J.; Gruber, S.; Hunziker, J.; Lim, R.; Weber, S.

2012-11-01

We present a custom acoustic emission (AE) monitoring system designed to perform long-term measurements on high-alpine rock walls. AE monitoring is a common technique for characterizing damage evolution in solid materials. The system is based on a two-channel AE sensor node (AE-node) integrated into a wireless sensor network (WSN) customized for operation in harsh environments. This wireless architecture offers flexibility in the deployment of AE-nodes at any position of the rock wall that needs to be monitored, within a range of a few hundred meters from a core station connected to the internet. The system achieves near real-time data delivery and allows the user to remotely control the AE detection threshold. In order to protect AE sensors and capture acoustic signals from specific depths of the rock wall, a special casing was developed. The monitoring system is completed by two probes that measure rock temperature and liquid water content, both probes being also integrated into the WSN. We report a first deployment of the monitoring system on a rock wall at Jungfraujoch, 3500 m a.s.l., Switzerland. While this first deployment of the monitoring system aims to support fundamental research on processes that damage rock under cold climate, the system could serve a number of other applications, including rock fall hazard surveillance or structural monitoring of concrete structures.

Sensitivity and specificity of dosing alerts for dosing errors among hospitalized pediatric patients

PubMed Central

Stultz, Jeremy S; Porter, Kyle; Nahata, Milap C

2014-01-01

Objectives To determine the sensitivity and specificity of a dosing alert system for dosing errors and to compare the sensitivity of a proprietary system with and without institutional customization at a pediatric hospital. Methods A retrospective analysis of medication orders, orders causing dosing alerts, reported adverse drug events, and dosing errors during July, 2011 was conducted. Dosing errors with and without alerts were identified and the sensitivity of the system with and without customization was compared. Results There were 47 181 inpatient pediatric orders during the studied period; 257 dosing errors were identified (0.54%). The sensitivity of the system for identifying dosing errors was 54.1% (95% CI 47.8% to 60.3%) if customization had not occurred and increased to 60.3% (CI 54.0% to 66.3%) with customization (p=0.02). The sensitivity of the system for underdoses was 49.6% without customization and 60.3% with customization (p=0.01). Specificity of the customized system for dosing errors was 96.2% (CI 96.0% to 96.3%) with a positive predictive value of 8.0% (CI 6.8% to 9.3). All dosing errors had an alert over-ridden by the prescriber and 40.6% of dosing errors with alerts were administered to the patient. The lack of indication-specific dose ranges was the most common reason why an alert did not occur for a dosing error. Discussion Advances in dosing alert systems should aim to improve the sensitivity and positive predictive value of the system for dosing errors. Conclusions The dosing alert system had a low sensitivity and positive predictive value for dosing errors, but might have prevented dosing errors from reaching patients. Customization increased the sensitivity of the system for dosing errors. PMID:24496386

Framework for Development of Object-Oriented Software

NASA Technical Reports Server (NTRS)

Perez-Poveda, Gus; Ciavarella, Tony; Nieten, Dan

2004-01-01

The Real-Time Control (RTC) Application Framework is a high-level software framework written in C++ that supports the rapid design and implementation of object-oriented application programs. This framework provides built-in functionality that solves common software development problems within distributed client-server, multi-threaded, and embedded programming environments. When using the RTC Framework to develop software for a specific domain, designers and implementers can focus entirely on the details of the domain-specific software rather than on creating custom solutions, utilities, and frameworks for the complexities of the programming environment. The RTC Framework was originally developed as part of a Space Shuttle Launch Processing System (LPS) replacement project called Checkout and Launch Control System (CLCS). As a result of the framework s development, CLCS software development time was reduced by 66 percent. The framework is generic enough for developing applications outside of the launch-processing system domain. Other applicable high-level domains include command and control systems and simulation/ training systems.

An Integrated System for Wildlife Sensing

DTIC Science & Technology

2014-08-14

design requirement. “Sensor Controller” software. A custom Sensor Controller application was developed for the Android device in order to collect...and log readings from that device’s sensors. “Camera Controller” software. A custom Camera Controller application was developed for the Android device...into 2 separate Android applications (Figure 4). The Sensor Controller logs readings periodically from the Android device’s organic sensors, and

VLSI neuroprocessors

NASA Technical Reports Server (NTRS)

Kemeny, Sabrina E.

1994-01-01

Electronic and optoelectronic hardware implementations of highly parallel computing architectures address several ill-defined and/or computation-intensive problems not easily solved by conventional computing techniques. The concurrent processing architectures developed are derived from a variety of advanced computing paradigms including neural network models, fuzzy logic, and cellular automata. Hardware implementation technologies range from state-of-the-art digital/analog custom-VLSI to advanced optoelectronic devices such as computer-generated holograms and e-beam fabricated Dammann gratings. JPL's concurrent processing devices group has developed a broad technology base in hardware implementable parallel algorithms, low-power and high-speed VLSI designs and building block VLSI chips, leading to application-specific high-performance embeddable processors. Application areas include high throughput map-data classification using feedforward neural networks, terrain based tactical movement planner using cellular automata, resource optimization (weapon-target assignment) using a multidimensional feedback network with lateral inhibition, and classification of rocks using an inner-product scheme on thematic mapper data. In addition to addressing specific functional needs of DOD and NASA, the JPL-developed concurrent processing device technology is also being customized for a variety of commercial applications (in collaboration with industrial partners), and is being transferred to U.S. industries. This viewgraph p resentation focuses on two application-specific processors which solve the computation intensive tasks of resource allocation (weapon-target assignment) and terrain based tactical movement planning using two extremely different topologies. Resource allocation is implemented as an asynchronous analog competitive assignment architecture inspired by the Hopfield network. Hardware realization leads to a two to four order of magnitude speed-up over conventional techniques and enables multiple assignments, (many to many), not achievable with standard statistical approaches. Tactical movement planning (finding the best path from A to B) is accomplished with a digital two-dimensional concurrent processor array. By exploiting the natural parallel decomposition of the problem in silicon, a four order of magnitude speed-up over optimized software approaches has been demonstrated.

Computers for Manned Space Applications Base on Commercial Off-the-Shelf Components

NASA Astrophysics Data System (ADS)

Vogel, T.; Gronowski, M.

2009-05-01

Similar to the consumer markets there has been an ever increasing demand in processing power, signal processing capabilities and memory space also for computers used for science data processing in space. An important driver of this development have been the payload developers for the International Space Station, requesting high-speed data acquisition and fast control loops in increasingly complex systems. Current experiments now even perform video processing and compression with their payload controllers. Nowadays the requirements for a space qualified computer are often far beyond the capabilities of, for example, the classic SPARC architecture that is found in ERC32 or LEON CPUs. An increase in performance usually demands costly and power consuming application specific solutions. Continuous developments over the last few years have now led to an alternative approach that is based on complete electronics modules manufactured for commercial and industrial customers. Computer modules used in industrial environments with a high demand for reliability under harsh environmental conditions like chemical reactors, electrical power plants or on manufacturing lines are entered into a selection procedure. Promising candidates then undergo a detailed characterisation process developed by Astrium Space Transportation. After thorough analysis and some modifications, these modules can replace fully qualified custom built electronics in specific, although not safety critical applications in manned space. This paper focuses on the benefits of COTS1 based electronics modules and the necessary analyses and modifications for their utilisation in manned space applications on the ISS. Some considerations regarding overall systems architecture will also be included. Furthermore this paper will also pinpoint issues that render such modules unsuitable for specific tasks, and justify the reasons. Finally, the conclusion of this paper will advocate the implementation of COTS based electronics for a range of applications within specifically adapted systems. The findings in this paper are extrapolated from two reference computer systems, both having been launched in 2008. One of those was a LEON-2 based computer installed onboard the Columbus Orbital Facility while the other system consisted mainly of a commercial Power-PC module that was modified for a launch mounted on the ICC pallet in the Space Shuttle's cargo bay. Both systems are currently upgraded and extended for future applications.

Customized shaping of vibration modes by acoustic metamaterial synthesis

NASA Astrophysics Data System (ADS)

Xu, Jiawen; Li, Shilong; Tang, J.

2018-04-01

Acoustic metamaterials have attractive potential in elastic wave guiding and attenuation over specific frequency ranges. The vast majority of related investigations are on transient waves. In this research we focus on stationary wave manipulation, i.e., shaping of vibration modes. Periodically arranged piezoelectric transducers shunted with inductive circuits are integrated to a beam structure to form a finite-length metamaterial beam. We demonstrate for the first time that, under a given operating frequency of interest, we can facilitate a metamaterial design such that this frequency becomes a natural frequency of the integrated system. Moreover, the vibration mode corresponding to this natural frequency can be customized and shaped to realize tailored/localized response distribution. This is fundamentally different from previous practices of utilizing geometry modification and/or feedback control to achieve mode tailoring. The metamaterial design is built upon the combinatorial effects of the bandgap feature and the effective resonant cavity feature, both attributed to the dynamic characteristics of the metamaterial beam. Analytical investigations based on unit-cell dynamics and modal analysis of the metamaterial beam are presented to reveal the underlying mechanism. Case illustrations are validated by finite element analyses. Owing to the online tunability of circuitry integrated, the proposed mode shaping technique can be online adjusted to fit specific requirements. The customized shaping of vibration modes by acoustic metamaterial synthesis has potential applications in vibration suppression, sensing enhancement and energy harvesting.

Recombinant Collagenlike Proteins

NASA Technical Reports Server (NTRS)

Fertala, Andzej

2007-01-01

A group of collagenlike recombinant proteins containing high densities of biologically active sites has been invented. The method used to express these proteins is similar to a method of expressing recombinant procollagens and collagens described in U. S. Patent 5,593,859, "Synthesis of human procollagens and collagens in recombinant DNA systems." Customized collagenous proteins are needed for biomedical applications. In particular, fibrillar collagens are attractive for production of matrices needed for tissue engineering and drug delivery. Prior to this invention, there was no way of producing customized collagenous proteins for these and other applications. Heretofore, collagenous proteins have been produced by use of such biological systems as yeasts, bacteria, and transgenic animals and plants. These products are normal collagens that can also be extracted from such sources as tendons, bones, and hides. These products cannot be made to consist only of biologically active, specific amino acid sequences that may be needed for specific applications. Prior to this invention, it had been established that fibrillar collagens consist of domains that are responsible for such processes as interaction with cells, binding of growth factors, and interaction with a number of structural proteins present in the extracellular matrix. A normal collagen consists of a sequence of domains that can be represented by a corresponding sequence of labels, e.g., D1D2D3D4. A collagenlike protein of the present invention contains regions of collagen II that contain multiples of a single domain (e.g., D1D1D1D1 or D4D4D4D4) chosen for its specific biological activity. By virtue of the multiplicity of the chosen domain, the density of sites having that specific biological activity is greater than it is in a normal collagen. A collagenlike protein according to this invention can thus be made to have properties that are necessary for tissue engineering.

49 CFR 1180.10 - Service assurance plans.

Code of Federal Regulations, 2011 CFR

2011-10-01

... should be sufficient for individual shippers to evaluate the projected improvements and changes, and... revised and how these revisions would affect service to customers. As part of this analysis, applicants... those systems to ensure service delivery. (f) Customer service. To achieve and maintain customer...

49 CFR 1180.10 - Service assurance plans.

Code of Federal Regulations, 2013 CFR

2013-10-01

... should be sufficient for individual shippers to evaluate the projected improvements and changes, and... revised and how these revisions would affect service to customers. As part of this analysis, applicants... those systems to ensure service delivery. (f) Customer service. To achieve and maintain customer...

49 CFR 1180.10 - Service assurance plans.

Code of Federal Regulations, 2012 CFR

2012-10-01

... should be sufficient for individual shippers to evaluate the projected improvements and changes, and... revised and how these revisions would affect service to customers. As part of this analysis, applicants... those systems to ensure service delivery. (f) Customer service. To achieve and maintain customer...

49 CFR 1180.10 - Service assurance plans.

Code of Federal Regulations, 2010 CFR

2010-10-01

... should be sufficient for individual shippers to evaluate the projected improvements and changes, and... revised and how these revisions would affect service to customers. As part of this analysis, applicants... those systems to ensure service delivery. (f) Customer service. To achieve and maintain customer...

49 CFR 1180.10 - Service assurance plans.

Code of Federal Regulations, 2014 CFR

2014-10-01

... should be sufficient for individual shippers to evaluate the projected improvements and changes, and... revised and how these revisions would affect service to customers. As part of this analysis, applicants... those systems to ensure service delivery. (f) Customer service. To achieve and maintain customer...

Meeting the needs of customers with health CRM.

PubMed

Phillips, Jon; Panchal, Samir

2002-01-01

Customer relationship management (CRM) is a business strategy, supported by applications and technologies, that can fundamentally transform how healthcare delivery organizations manage patient and physician interactions, reduce cost, improve customer-facing processes, drive market and revenue growth, and manage regulatory compliance processes.

78 FR 24263 - Self-Regulatory Organizations; NASDAQ OMX PHLX LLC; Notice of Filing and Immediate Effectiveness...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-24

... assesses Non-Customers a flat rate of $0.95 per contract on all Non-Customer orders routed to any away market and the Exchange assesses Customer orders a fixed fee plus the actual transaction fee dependent on the away market. Specifically, the Exchange assesses Customer orders routed to NASDAQ Options Market...

77 FR 57618 - Self-Regulatory Organizations; The NASDAQ Stock Market LLC; Notice of Filing and Immediate...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-18

... Proposed Rule Change Relating to the Customer Rebate To Add Liquidity and Non-Customer Fees for Removing... routing standardized equity and index options. Specifically, NOM proposes to amend the Customer Rebate to Add Liquidity and Non-Customer Fees for Removing Liquidity in Penny Pilot \\3\\ Options. \\3\\ The Penny...

29 CFR 794.128 - Sales made to out-of-State customers.

Code of Federal Regulations, 2010 CFR

2010-07-01

...-of-State customer, some specific relationship between him and the seller has to exist to indicate his... relationship with the customer is such as to indicate his out-of-State character. Such a relationship would... 29 Labor 3 2010-07-01 2010-07-01 false Sales made to out-of-State customers. 794.128 Section 794...

19 CFR 207.1 - Applicability of part.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 3 2010-04-01 2010-04-01 false Applicability of part. 207.1 Section 207.1 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION NONADJUDICATIVE INVESTIGATIONS INVESTIGATIONS OF WHETHER INJURY TO DOMESTIC INDUSTRIES RESULTS FROM IMPORTS SOLD AT LESS THAN FAIR VALUE OR FROM SUBSIDIZED...

77 FR 73038 - Agency Information Collection Activities: Application for Allowance in Duties

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-07

... DEPARTMENT OF HOMELAND SECURITY U.S. Customs and Border Protection Agency Information Collection Activities: Application for Allowance in Duties AGENCY: U.S. Customs and Border Protection (CBP), Department of Homeland Security. ACTION: 60-day notice and request for comments; Extension of an existing...

19 CFR 208.1 - Applicability of part.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 3 2010-04-01 2010-04-01 false Applicability of part. 208.1 Section 208.1 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION NONADJUDICATIVE INVESTIGATIONS INVESTIGATIONS WITH RESPECT TO COMMERCIAL AVAILABILITY OF TEXTILE FABRIC AND YARN IN SUB-SAHARAN AFRICAN COUNTRIES § 208.1...

Modular Integrated Stackable Layers (MISL) 1.1 Design Specification. Design Guideline Document

NASA Technical Reports Server (NTRS)

Yim, Hester J.

2012-01-01

This document establishes the design guideline of the Modular Instrumentation Data Acquisition (MI-DAQ) system in utilization of several designs available in EV. The MI- DAQ provides the options to the customers depending on their system requirements i.e. a 28V interface power supply, a low power battery operated system, a low power microcontroller, a higher performance microcontroller, a USB interface, a Ethernet interface, a wireless communication, various sensor interfaces, etc. Depending on customer's requirements, the each functional board can be stacked up from a bottom level of power supply to a higher level of stack to provide user interfaces. The stack up of boards are accomplished by a predefined and standardized power bus and data bus connections which are included in this document along with other physical and electrical guidelines. This guideline also provides information for a new design options. This specification is the product of a collaboration between NASA/JSC/EV and Texas A&M University. The goal of the collaboration is to open source the specification and allow outside entities to design, build, and market modules that are compatible with the specification. NASA has designed and is using numerous modules that are compatible to this specification. A limited number of these modules will also be released as open source designs to support the collaboration. The released designs are listed in the Applicable Documents.

Computer Model Used to Help Customize Medicine

NASA Technical Reports Server (NTRS)

Stauber, Laurel J.; Veris, Jenise

2001-01-01

Dr. Radhakrishnan, a researcher at the NASA Glenn Research Center, in collaboration with biomedical researchers at the Case Western Reserve University School of Medicine and Rainbow Babies and Children's Hospital, is developing computational models of human physiology that quantitate metabolism and its regulation, in both healthy and pathological states. These models can help predict the effects of stresses or interventions, such as drug therapies, and contribute to the development of customized medicine. Customized medical treatment protocols can give more comprehensive evaluations and lead to more specific and effective treatments for patients, reducing treatment time and cost. Commercial applications of this research may help the pharmaceutical industry identify therapeutic needs and predict drug-drug interactions. Researchers will be able to study human metabolic reactions to particular treatments while in different environments as well as establish more definite blood metabolite concentration ranges in normal and pathological states. These computational models may help NASA provide the background for developing strategies to monitor and safeguard the health of astronauts and civilians in space stations and colonies. They may also help to develop countermeasures that ameliorate the effects of both acute and chronic space exposure.

The utility of 3D printing for surgical planning and patient-specific implant design for complex spinal pathologies: case report.

PubMed

Mobbs, Ralph J; Coughlan, Marc; Thompson, Robert; Sutterlin, Chester E; Phan, Kevin

2017-04-01

OBJECTIVE There has been a recent renewed interest in the use and potential applications of 3D printing in the assistance of surgical planning and the development of personalized prostheses. There have been few reports on the use of 3D printing for implants designed to be used in complex spinal surgery. METHODS The authors report 2 cases in which 3D printing was used for surgical planning as a preoperative mold, and for a custom-designed titanium prosthesis: one patient with a C-1/C-2 chordoma who underwent tumor resection and vertebral reconstruction, and another patient with a custom-designed titanium anterior fusion cage for an unusual congenital spinal deformity. RESULTS In both presented cases, the custom-designed and custom-built implants were easily slotted into position, which facilitated the surgery and shortened the procedure time, avoiding further complex reconstruction such as harvesting rib or fibular grafts and fashioning these grafts intraoperatively to fit the defect. Radiological follow-up for both cases demonstrated successful fusion at 9 and 12 months, respectively. CONCLUSIONS These cases demonstrate the feasibility of the use of 3D modeling and printing to develop personalized prostheses and can ease the difficulty of complex spinal surgery. Possible future directions of research include the combination of 3D-printed implants and biologics, as well as the development of bioceramic composites and custom implants for load-bearing purposes.

12 CFR 48.12 - Authorization to trade.

Code of Federal Regulations, 2014 CFR

2014-01-01

... or indirectly effect a retail forex transaction for the account of any retail forex customer unless, before the retail forex transaction occurs, the retail forex customer specifically authorized the national bank to effect the retail forex transaction. (b) Requirements for specific authorization. A retail...

12 CFR 48.12 - Authorization to trade.

Code of Federal Regulations, 2013 CFR

2013-01-01

... or indirectly effect a retail forex transaction for the account of any retail forex customer unless, before the retail forex transaction occurs, the retail forex customer specifically authorized the national bank to effect the retail forex transaction. (b) Requirements for specific authorization. A retail...

12 CFR 240.12 - Authorization to trade.

Code of Federal Regulations, 2014 CFR

2014-01-01

...) Specific authorization required. No banking institution may directly or indirectly effect a retail forex transaction for the account of any retail forex customer unless, before the transaction occurs, the retail forex customer specifically authorized the banking institution to effect the retail forex transaction...

12 CFR 48.12 - Authorization to trade.

Code of Federal Regulations, 2012 CFR

2012-01-01

... or indirectly effect a retail forex transaction for the account of any retail forex customer unless, before the retail forex transaction occurs, the retail forex customer specifically authorized the national bank to effect the retail forex transaction. (b) Requirements for specific authorization. A retail...

State of the Art of Network Security Perspectives in Cloud Computing

NASA Astrophysics Data System (ADS)

Oh, Tae Hwan; Lim, Shinyoung; Choi, Young B.; Park, Kwang-Roh; Lee, Heejo; Choi, Hyunsang

Cloud computing is now regarded as one of social phenomenon that satisfy customers' needs. It is possible that the customers' needs and the primary principle of economy - gain maximum benefits from minimum investment - reflects realization of cloud computing. We are living in the connected society with flood of information and without connected computers to the Internet, our activities and work of daily living will be impossible. Cloud computing is able to provide customers with custom-tailored features of application software and user's environment based on the customer's needs by adopting on-demand outsourcing of computing resources through the Internet. It also provides cloud computing users with high-end computing power and expensive application software package, and accordingly the users will access their data and the application software where they are located at the remote system. As the cloud computing system is connected to the Internet, network security issues of cloud computing are considered as mandatory prior to real world service. In this paper, survey and issues on the network security in cloud computing are discussed from the perspective of real world service environments.

77 FR 49831 - Agency Information Collection Activities; Proposed Collection, Comments Requested; Customer...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-17

... DEPARTMENT OF JUSTICE Federal Bureau of Investigation [OMB Number 1110-0045] Agency Information Collection Activities; Proposed Collection, Comments Requested; Customer Satisfaction Assessment ACTION: 30...: Customer Satisfaction Assessment. 3. The agency form number, if any, and the applicable component of the...

77 FR 36293 - Agency Information Collection Activities; Proposed Collection, Comments Requested: Customer...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-18

... DEPARTMENT OF JUSTICE Federal Bureau of Investigation [OMB Number 1110-0045] Agency Information Collection Activities; Proposed Collection, Comments Requested: Customer Satisfaction Assessment ACTION: 60...: Customer Satisfaction Assessment. 3. The agency form number, if any, and the applicable component of the...

76 FR 6633 - Agency Information Collection Activities: Proposed Collection; Comments Requested

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-07

... of Information Collection Under Review: Customer Satisfaction Surveys. The Department of Justice (DOJ...: Extension of a currently approved collection. (2) Title of the Form/Collection: Customer Satisfaction... of Alcohol, Tobacco, Firearms and Explosives distribute program-specific customer satisfaction...

19 CFR 212.24 - Settlement.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 3 2010-04-01 2010-04-01 false Settlement. 212.24 Section 212.24 Customs Duties... IMPLEMENTATION OF THE EQUAL ACCESS TO JUSTICE ACT Procedures for Considering Applications § 212.24 Settlement. The applicant and the Commission may agree on a proposed settlement of the award before final action...

19 CFR 201.8 - Filing of documents.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 19 Customs Duties 3 2013-04-01 2013-04-01 false Filing of documents. 201.8 Section 201.8 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION GENERAL RULES OF GENERAL APPLICATION Initiation and Conduct of Investigations § 201.8 Filing of documents. (a) Applicability; where to file; date of filing...

19 CFR 201.8 - Filing of documents.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 19 Customs Duties 3 2014-04-01 2014-04-01 false Filing of documents. 201.8 Section 201.8 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION GENERAL RULES OF GENERAL APPLICATION Initiation and Conduct of Investigations § 201.8 Filing of documents. (a) Applicability; where to file; date of filing...

19 CFR 212.13 - When an application may be filed.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 3 2010-04-01 2010-04-01 false When an application may be filed. 212.13 Section 212.13 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION INVESTIGATIONS OF UNFAIR PRACTICES IN IMPORT TRADE IMPLEMENTATION OF THE EQUAL ACCESS TO JUSTICE ACT Information Required From...

19 CFR 206.12 - Definitions applicable to subpart B of this part.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 3 2010-04-01 2010-04-01 false Definitions applicable to subpart B of this part. 206.12 Section 206.12 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION NONADJUDICATIVE INVESTIGATIONS INVESTIGATIONS RELATING TO GLOBAL AND BILATERAL SAFEGUARD ACTIONS, MARKET DISRUPTION, TRADE...

78 FR 13673 - HTC America, Inc.; Analysis of Proposed Consent Order To Aid Public Comment

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-28

... modifying various pre-installed applications and components in order to differentiate its products from.... As the customized applications and components are pre-installed on the device, consumers do not... together, failed to provide reasonable and appropriate security in the design and customization of software...

19 CFR 212.10 - Contents of application.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 3 2010-04-01 2010-04-01 false Contents of application. 212.10 Section 212.10 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION INVESTIGATIONS OF UNFAIR PRACTICES IN IMPORT... it is a cooperative association as defined in section 15(a) of the Agricultural Marketing Act (12 U.S...

Rapid Prototyping of Hydrologic Model Interfaces with IPython

NASA Astrophysics Data System (ADS)

Farthing, M. W.; Winters, K. D.; Ahmadia, A. J.; Hesser, T.; Howington, S. E.; Johnson, B. D.; Tate, J.; Kees, C. E.

2014-12-01

A significant gulf still exists between the state of practice and state of the art in hydrologic modeling. Part of this gulf is due to the lack of adequate pre- and post-processing tools for newly developed computational models. The development of user interfaces has traditionally lagged several years behind the development of a particular computational model or suite of models. As a result, models with mature interfaces often lack key advancements in model formulation, solution methods, and/or software design and technology. Part of the problem has been a focus on developing monolithic tools to provide comprehensive interfaces for the entire suite of model capabilities. Such efforts require expertise in software libraries and frameworks for creating user interfaces (e.g., Tcl/Tk, Qt, and MFC). These tools are complex and require significant investment in project resources (time and/or money) to use. Moreover, providing the required features for the entire range of possible applications and analyses creates a cumbersome interface. For a particular site or application, the modeling requirements may be simplified or at least narrowed, which can greatly reduce the number and complexity of options that need to be accessible to the user. However, monolithic tools usually are not adept at dynamically exposing specific workflows. Our approach is to deliver highly tailored interfaces to users. These interfaces may be site and/or process specific. As a result, we end up with many, customized interfaces rather than a single, general-use tool. For this approach to be successful, it must be efficient to create these tailored interfaces. We need technology for creating quality user interfaces that is accessible and has a low barrier for integration into model development efforts. Here, we present efforts to leverage IPython notebooks as tools for rapid prototyping of site and application-specific user interfaces. We provide specific examples from applications in near-shore environments as well as levee analysis. We discuss our design decisions and methodology for developing customized interfaces, strategies for delivery of the interfaces to users in various computing environments, as well as implications for the design/implementation of simulation models.

Multi-anode wire two dimensional proportional counter for detecting Iron-55 X-Ray Radiation

NASA Astrophysics Data System (ADS)

Weston, Michael William James

Radiation detectors in many applications use small sensor areas or large tubes which only collect one-dimensional information. There are some applications that require analyzing a large area and locating specific elements such as contamination on the heat tiles of a space shuttle or features on historical artifacts. The process can be time consuming and scanning a large area in a single pass is beneficial. The use of a two dimensional multi-wire proportional counter provides a large detection window presenting positional information in a single pass. This thesis described the design and implementation of an experimental detector to evaluate a specific design intended for use as a handheld instrument. The main effort of this research was to custom build a detector for testing purposes. The aluminum chamber and all circuit boards were custom designed and built specifically for this application. Various software and programmable logic algorithms were designed to analyze the raw data in real time and attempted to determine what data was useful and what could be discarded. The research presented here provides results useful for designing an improved second generation detector in the future. With the anode wire spacing chosen and the minimal collimation of the radiation source, detected events occurred all over the detection grid at any time. The raw event data did not make determining the source position easy and further data correlation was required. An abundance of samples had multiple wire hits which were not useful because it falsely reported the source to be all over the place and at different energy levels. By narrowing down the results to only use the largest signal pairs on different axes in each event, a much more accurate analysis of where the source existed above the grid was determined. The basic principle and construction method was shown to work, however the gas selection, geometry and anode wire constructs proved to be poor. To provide a system optimized for a specific application would require detailed Monte Carlo simulations. These simulation results together with the details and techniques implemented in this thesis would provide a final instrument of much higher accuracy.

Platelet-rich plasma: combinational treatment modalities for musculoskeletal conditions.

PubMed

Andia, Isabel; Abate, Michele

2018-04-01

Current research on common musculoskeletal problems, including osteoarticular conditions, tendinopathies, and muscle injuries, focuses on regenerative translational medicine. Platelet-rich plasma therapies have emerged as a potential approach to enhance tissue repair and regeneration. Platelet-rich plasma application aims to provide supraphysiological concentrations of platelets and optionally leukocytes at injured/pathological tissues mimicking the initial stages of healing. However, the efficacy of platelet-rich plasma is controversial in chronic diseases because patients' outcomes show partial improvements. Platelet-rich plasma can be customized to specific conditions by selecting the most appropriate formulation and timing for application or by combining platelet-rich plasma with synergistic or complementary treatments. To achieve this goal, researchers should identify and enhance the main mechanisms of healing. In this review, the interactions between platelet-rich plasma and healing mechanisms were addressed and research opportunities for customized treatment modalities were outlined. The development of combinational platelet-rich plasma treatments that can be used safely and effectively to manipulate healing mechanisms would be valuable and would provide insights into the processes involved in physiological healing and pathological failure.

Stochastic optimization of broadband reflecting photonic structures.

PubMed

Estrada-Wiese, D; Del Río-Chanona, E A; Del Río, J A

2018-01-19

Photonic crystals (PCs) are built to control the propagation of light within their structure. These can be used for an assortment of applications where custom designed devices are of interest. Among them, one-dimensional PCs can be produced to achieve the reflection of specific and broad wavelength ranges. However, their design and fabrication are challenging due to the diversity of periodic arrangement and layer configuration that each different PC needs. In this study, we present a framework to design high reflecting PCs for any desired wavelength range. Our method combines three stochastic optimization algorithms (Random Search, Particle Swarm Optimization and Simulated Annealing) along with a reduced space-search methodology to obtain a custom and optimized PC configuration. The optimization procedure is evaluated through theoretical reflectance spectra calculated by using the Equispaced Thickness Method, which improves the simulations due to the consideration of incoherent light transmission. We prove the viability of our procedure by fabricating different reflecting PCs made of porous silicon and obtain good agreement between experiment and theory using a merit function. With this methodology, diverse reflecting PCs can be designed for any applications and fabricated with different materials.

Projection display technology for avionics applications

NASA Astrophysics Data System (ADS)

Kalmanash, Michael H.; Tompkins, Richard D.

2000-08-01

Avionics displays often require custom image sources tailored to demanding program needs. Flat panel devices are attractive for cockpit installations, however recent history has shown that it is not possible to sustain a business manufacturing custom flat panels in small volume specialty runs. As the number of suppliers willing to undertake this effort shrinks, avionics programs unable to utilize commercial-off-the-shelf (COTS) flat panels are placed in serious jeopardy. Rear projection technology offers a new paradigm, enabling compact systems to be tailored to specific platform needs while using a complement of COTS components. Projection displays enable improved performance, lower cost and shorter development cycles based on inter-program commonality and the wide use of commercial components. This paper reviews the promise and challenges of projection technology and provides an overview of Kaiser Electronics' efforts in developing advanced avionics displays using this approach.

Modular magnetic tweezers for single-molecule characterizations of helicases.

PubMed

Kemmerich, Felix E; Kasaciunaite, Kristina; Seidel, Ralf

2016-10-01

Magnetic tweezers provide a versatile toolkit supporting the mechanistic investigation of helicases. In the present article, we show that custom magnetic tweezers setups are straightforward to construct and can easily be extended to provide adaptable platforms, capable of addressing a multitude of enquiries regarding the functions of these fascinating molecular machines. We first address the fundamental components of a basic magnetic tweezers scheme and review some previous results to demonstrate the versatility of this instrument. We then elaborate on several extensions to the basic magnetic tweezers scheme, and demonstrate their applications with data from ongoing research. As our methodological overview illustrates, magnetic tweezers are an extremely useful tool for the characterization of helicases and a custom built instrument can be specifically tailored to suit the experimenter's needs. Copyright © 2016 Elsevier Inc. All rights reserved.

76 FR 48884 - Stacey J. Webb, M.D.; Denial of Application

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-09

... Telemed customers, Respondent's customers described learning about Telemed through an internet source..., Respondent authorized four prescriptions for 90 hydrocodone/apap (acetaminophen) (10/325 mg) tablets \\3\\ to... ten prescriptions for 90 hydrocodone/apap (10/500 mg) tablets to Customer D.H., who resided...

19 CFR 118.3 - Written agreement.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 1 2010-04-01 2010-04-01 false Written agreement. 118.3 Section 118.3 Customs... CENTRALIZED EXAMINATION STATIONS General Provisions § 118.3 Written agreement. The applicant tentatively selected to operate a CES must sign a written agreement with Customs before commencing operations. Failure...

Knowing what to sell, when, and to whom.

PubMed

Kumar, V; Venkatesan, Rajkumar; Reinartz, Werner

2006-03-01

Despite an abundance of data, most companies do a poor job of predicting the behavior of their customers. In fact, the authors' research suggests that even companies that take the greatest trouble over their predictions about whether a particular customer will buy a particular product are correct only around 55% of the time--a result that hardly justifies the costs of having a CRM system in the first place. Businesses usually conclude from studies like this that it's impossible to use the past to predict the future, so they revert to the timeworn marketing practice of inundating their customers with offers. But as the authors explain, the reason for the poor predictions is not any basic limitation of CRM systems or the predictive power of past behavior, but rather of the mathematical methods that companies use to interpret the data. The authors have developed a new way of predicting customer behavior, based on the work of the Nobel Prize-winning economist Daniel McFadden, that delivers vastly improved results. Indeed, the methodology increases the odds of successfully predicting a specific purchase by a specific customer at a specific time to about 85%, a number that will have a major impact on any company's marketing ROI. What's more, using this methodology, companies can increase revenues while reducing their frequency of customer contact-evidence that overcommunication with customers may actually damage a company's sales.

Analysis of commercial equipment and instrumentation for Spacelab payloads, volume 2

NASA Technical Reports Server (NTRS)

1974-01-01

Technical results are presented of a study to investigate analytically the feasibility of using commercially available laboratory equipment and instrumentation in the spacelab in support of various experiments. The feasibility is demonstrated by the breadth of application of commercial, airborne, and military equipment to experiment equipment requirements in the spacelab, and the cost effectiveness of utilizing this class of equipment instead of custom-built aerospace equipment typical of past designs. Equipment design and specifications are discussed.

Visualization, documentation, analysis, and communication of large scale gene regulatory networks

PubMed Central

Longabaugh, William J.R.; Davidson, Eric H.; Bolouri, Hamid

2009-01-01

Summary Genetic regulatory networks (GRNs) are complex, large-scale, and spatially and temporally distributed. These characteristics impose challenging demands on computational GRN modeling tools, and there is a need for custom modeling tools. In this paper, we report on our ongoing development of BioTapestry, an open source, freely available computational tool designed specifically for GRN modeling. We also outline our future development plans, and give some examples of current applications of BioTapestry. PMID:18757046

Applications of 3D printing in the management of severe spinal conditions.

PubMed

Provaggi, Elena; Leong, Julian J H; Kalaskar, Deepak M

2017-06-01

The latest and fastest-growing innovation in the medical field has been the advent of three-dimensional printing technologies, which have recently seen applications in the production of low-cost, patient-specific medical implants. While a wide range of three-dimensional printing systems has been explored in manufacturing anatomical models and devices for the medical setting, their applications are cutting-edge in the field of spinal surgery. This review aims to provide a comprehensive overview and classification of the current applications of three-dimensional printing technologies in spine care. Although three-dimensional printing technology has been widely used for the construction of patient-specific anatomical models of the spine and intraoperative guide templates to provide personalized surgical planning and increase pedicle screw placement accuracy, only few studies have been focused on the manufacturing of spinal implants. Therefore, three-dimensional printed custom-designed intervertebral fusion devices, artificial vertebral bodies and disc substitutes for total disc replacement, along with tissue engineering strategies focused on scaffold constructs for bone and cartilage regeneration, represent a set of promising applications towards the trend of individualized patient care.

Applications, Surface Modification and Functionalization of Nickel Nanorods

PubMed Central

Schrittwieser, Stefan; Reichinger, Daniela; Schotter, Joerg

2017-01-01

The growing number of nanoparticle applications in science and industry is leading to increasingly complex nanostructures that fulfill certain tasks in a specific environment. Nickel nanorods already possess promising properties due to their magnetic behavior and their elongated shape. The relevance of this kind of nanorod in a complex measurement setting can be further improved by suitable surface modification and functionalization procedures, so that customized nanostructures for a specific application become available. In this review, we focus on nickel nanorods that are synthesized by electrodeposition into porous templates, as this is the most common type of nickel nanorod fabrication method. Moreover, it is a facile synthesis approach that can be easily established in a laboratory environment. Firstly, we will discuss possible applications of nickel nanorods ranging from data storage to catalysis, biosensing and cancer treatment. Secondly, we will focus on nickel nanorod surface modification strategies, which represent a crucial step for the successful application of nanorods in all medical and biological settings. Here, the immobilization of antibodies or peptides onto the nanorod surface adds another functionality in order to yield highly promising nanostructures. PMID:29283415

19 CFR 172.21 - Decisions effective for limited time.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 19 Customs Duties 2 2012-04-01 2012-04-01 false Decisions effective for limited time. 172.21 Section 172.21 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY... liquidated damages will be deemed applicable and will be enforced by promptly transmitting the matter, after...

19 CFR 172.21 - Decisions effective for limited time.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 19 Customs Duties 2 2014-04-01 2014-04-01 false Decisions effective for limited time. 172.21 Section 172.21 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY... liquidated damages will be deemed applicable and will be enforced by promptly transmitting the matter, after...

19 CFR 171.22 - Decisions effective for limited time.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 19 Customs Duties 2 2013-04-01 2013-04-01 false Decisions effective for limited time. 171.22 Section 171.22 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY... deemed applicable and will be enforced by promptly referring the matter, after required collection action...

19 CFR 171.22 - Decisions effective for limited time.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 19 Customs Duties 2 2014-04-01 2014-04-01 false Decisions effective for limited time. 171.22 Section 171.22 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY... deemed applicable and will be enforced by promptly referring the matter, after required collection action...

19 CFR 172.21 - Decisions effective for limited time.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 2 2011-04-01 2011-04-01 false Decisions effective for limited time. 172.21 Section 172.21 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY... liquidated damages will be deemed applicable and will be enforced by promptly transmitting the matter, after...

19 CFR 172.21 - Decisions effective for limited time.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 2 2010-04-01 2010-04-01 false Decisions effective for limited time. 172.21 Section 172.21 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY... liquidated damages will be deemed applicable and will be enforced by promptly transmitting the matter, after...

19 CFR 171.22 - Decisions effective for limited time.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 2 2010-04-01 2010-04-01 false Decisions effective for limited time. 171.22 Section 171.22 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY... deemed applicable and will be enforced by promptly referring the matter, after required collection action...

19 CFR 172.21 - Decisions effective for limited time.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 19 Customs Duties 2 2013-04-01 2013-04-01 false Decisions effective for limited time. 172.21 Section 172.21 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY... liquidated damages will be deemed applicable and will be enforced by promptly transmitting the matter, after...

19 CFR 171.22 - Decisions effective for limited time.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 19 Customs Duties 2 2012-04-01 2012-04-01 false Decisions effective for limited time. 171.22 Section 171.22 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY... deemed applicable and will be enforced by promptly referring the matter, after required collection action...

19 CFR 171.22 - Decisions effective for limited time.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 2 2011-04-01 2011-04-01 false Decisions effective for limited time. 171.22 Section 171.22 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY... deemed applicable and will be enforced by promptly referring the matter, after required collection action...

North Carolina | Midmarket Solar Policies in the United States | Solar

Science.gov Websites

impose standby charges consistent with approved standby rates applicable to other customer-owned utilities without customer compensation. RECs: Utilities owns renewable energy certificates (RECs), unless customer chooses to net meter under a time of use tariff with demand charges. Meter aggregation: Not

77 FR 1510 - Agency Information Collection Activities: Proposed Collection; Comments Requested; Firearms...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-10

... Services Division Customer Service Survey ACTION: 60-Day Notice of Information Collection. The Department... & Explosives Services Division Customer Service Survey. (3) Agency form number, if any, and the applicable... firearms and explosives industry. This anonymous survey would allow FESD to gauge customer satisfaction and...

76 FR 59759 - Self-Regulatory Organizations; Financial Industry Regulatory Authority, Inc.; Notice of Filing...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-27

... FINRA members have attained specified levels of competence and knowledge, consistent with applicable... functions: F1: Seeks Business for the Broker-Dealer through Customers and Potential Customers, 20 questions; F2: Evaluates Customers' Other Security Holdings, Financial Situation and Needs, Financial Status...

19 CFR 19.1 - Classes of customs warehouses.

Code of Federal Regulations, 2011 CFR

2011-04-01

... customs warehouses. (a) Classifications. Customs warehouses shall be designated according to the following classifications: (1) Class 1. Premises that may be owned or leased by the Government, when the exigencies of the... class 11 warehouse, following an application under § 19.2. So far as such warehouses are used for the...

19 CFR 19.1 - Classes of customs warehouses.

Code of Federal Regulations, 2010 CFR

2010-04-01

... customs warehouses. (a) Classifications. Customs warehouses shall be designated according to the following classifications: (1) Class 1. Premises that may be owned or leased by the Government, when the exigencies of the... class 11 warehouse, following an application under § 19.2. So far as such warehouses are used for the...

77 FR 51577 - Agency Information Collection Activities; Proposed Collection; Comments Requested: National...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-24

... Customer Satisfaction Survey ACTION: 30-Day notice of information collection under review. The Department... Satisfaction Survey. (3) Agency form number, if any, and the applicable component of the Department of Justice... customer satisfaction survey to more effectively capture customer perception/satisfaction of services. AEPD...

19 CFR 118.13 - Notification of selection or nonselection.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 1 2010-04-01 2010-04-01 false Notification of selection or nonselection. 118.13 Section 118.13 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY CENTRALIZED EXAMINATION STATIONS Application To Establish a CES § 118.13...

19 CFR 10.38 - Exportation.

Code of Federal Regulations, 2013 CFR

2013-04-01

... another port. An application on Customs Form 3495 shall be filed in duplicate with the port director a... of Customs Form 3495 where the articles are to be sent for identification. If a carnet was used for entry purposes, the reexportation voucher of the carnet shall be filed, in addition to Customs Form 3495...

19 CFR 10.38 - Exportation.

Code of Federal Regulations, 2011 CFR

2011-04-01

... another port. An application on Customs Form 3495 shall be filed in duplicate with the port director a... of Customs Form 3495 where the articles are to be sent for identification. If a carnet was used for entry purposes, the reexportation voucher of the carnet shall be filed, in addition to Customs Form 3495...

19 CFR 10.38 - Exportation.

Code of Federal Regulations, 2012 CFR

2012-04-01

... another port. An application on Customs Form 3495 shall be filed in duplicate with the port director a... of Customs Form 3495 where the articles are to be sent for identification. If a carnet was used for entry purposes, the reexportation voucher of the carnet shall be filed, in addition to Customs Form 3495...

19 CFR 10.38 - Exportation.

Code of Federal Regulations, 2014 CFR

2014-04-01

... another port. An application on Customs Form 3495 shall be filed in duplicate with the port director a... of Customs Form 3495 where the articles are to be sent for identification. If a carnet was used for entry purposes, the reexportation voucher of the carnet shall be filed, in addition to Customs Form 3495...

Customer service in equine veterinary medicine.

PubMed

Blach, Edward L

2009-12-01

This article explores customer service in equine veterinary medicine. It begins with a discussion about the differences between customers and clients in veterinary medicine. An overview of the nature of the veterinary-client-patient relationship and its effects on the veterinarian's services sheds light on how to evaluate your customer service. The author reviews a study performed in 2007 that evaluated 24 attributes of customer service and their importance to clients of equine veterinarians in their decision to select a specific veterinarian or hospital. The article concludes with an overview of how to evaluate your customer service in an effort to optimize your service to achieve customer loyalty.

31 CFR 10.8 - Customhouse brokers.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Commissioner of Customs in accordance with the regulations prescribed therefor, in any customs district in... National Office of the Internal Revenue Service, to act as a representative in respect to any matters relating specifically to the importation or exportation of merchandise under the customs or internal...

75 FR 12561 - Request for Applicants for Appointment to the Advisory Committee on Commercial Operations of...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-16

... Appointment to the Advisory Committee on Commercial Operations of Customs and Border Protection (COAC) AGENCY... Management; request for applicants for appointment to the Advisory Committee on Commercial Operations of... individuals who are interested in serving on the Advisory Committee on Commercial Operations of Customs and...

77 FR 15024 - Privacy Act of 1974; Revised System of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-14

... Agency customers and employees single sign-on capability and electronic authentication and authorization...Authentication acts as a single sign-on point for USDA Agency applications. This allows a USDA customer to sign onto any USDA applications they have been authorized on via a single sign-on. 2. When a record on its...

27 CFR 28.22 - Vessels employed in the fisheries.

Code of Federal Regulations, 2010 CFR

2010-04-01

... event of a failure on the part of the withdrawer or the master of the vessel to comply with the... withdrawal or lading shall be conditioned upon compliance with the applicable provisions of this part. Lading... customs of a special written application by the withdrawer or the vessel's master on customs Form 5125 (in...

19 CFR 210.1 - Applicability of part.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 3 2010-04-01 2010-04-01 false Applicability of part. 210.1 Section 210.1 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION INVESTIGATIONS OF UNFAIR PRACTICES IN IMPORT TRADE..., and 1337) and sections 2 and 1342(d)(1)(B) of the Omnibus Trade and Competitiveness Act of 1988, Pub...

Customer Prioritization in Higher Education: Targeting "Right" Students for Long-Term Profitability

ERIC Educational Resources Information Center

Harrison-Walker, L. Jean

2010-01-01

As competition for students, faculty and financial support has increased, so has the application of marketing in the field of higher education. One critical application of marketing all too often neglected, misunderstood and mismanaged in higher education is targeting customers for profitability. The purpose of this paper is to enrich the…

75 FR 65515 - NRC Corporation, USPS Help Desk of Customer Care Center, Including On-Site Leased Workers of Volt...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-25

... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-74,347] NRC Corporation, USPS Help Desk of Customer Care Center, Including On-Site Leased Workers of Volt Consulting, West Columbia, SC; Notice of Affirmative Determination Regarding Application for Reconsideration By application...

19 CFR 177.11 - Requests for advice by field offices.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 2 2010-04-01 2010-04-01 false Requests for advice by field offices. 177.11... advice by field offices. (a) Generally. Advice or guidance as to the interpretation or proper application... prospective, current, or completed. Advice as to the proper application of the Customs and related laws to a...

19 CFR 177.11 - Requests for advice by field offices.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 2 2011-04-01 2011-04-01 false Requests for advice by field offices. 177.11... advice by field offices. (a) Generally. Advice or guidance as to the interpretation or proper application... prospective, current, or completed. Advice as to the proper application of the Customs and related laws to a...

Video data compression using artificial neural network differential vector quantization

NASA Technical Reports Server (NTRS)

Krishnamurthy, Ashok K.; Bibyk, Steven B.; Ahalt, Stanley C.

1991-01-01

An artificial neural network vector quantizer is developed for use in data compression applications such as Digital Video. Differential Vector Quantization is used to preserve edge features, and a new adaptive algorithm, known as Frequency-Sensitive Competitive Learning, is used to develop the vector quantizer codebook. To develop real time performance, a custom Very Large Scale Integration Application Specific Integrated Circuit (VLSI ASIC) is being developed to realize the associative memory functions needed in the vector quantization algorithm. By using vector quantization, the need for Huffman coding can be eliminated, resulting in superior performance against channel bit errors than methods that use variable length codes.

Understanding the Effects of Sampling on Healthcare Risk Modeling for the Prediction of Future High-Cost Patients

NASA Astrophysics Data System (ADS)

Moturu, Sai T.; Liu, Huan; Johnson, William G.

Rapidly rising healthcare costs represent one of the major issues plaguing the healthcare system. Data from the Arizona Health Care Cost Containment System, Arizona's Medicaid program provide a unique opportunity to exploit state-of-the-art machine learning and data mining algorithms to analyze data and provide actionable findings that can aid cost containment. Our work addresses specific challenges in this real-life healthcare application with respect to data imbalance in the process of building predictive risk models for forecasting high-cost patients. We survey the literature and propose novel data mining approaches customized for this compelling application with specific focus on non-random sampling. Our empirical study indicates that the proposed approach is highly effective and can benefit further research on cost containment in the healthcare industry.

Integrated Multidisciplinary Optimization Objects

NASA Technical Reports Server (NTRS)

Alston, Katherine

2014-01-01

OpenMDAO is an open-source MDAO framework. It is used to develop an integrated analysis and design environment for engineering challenges. This Phase II project integrated additional modules and design tools into OpenMDAO to perform discipline-specific analysis across multiple flight regimes at varying levels of fidelity. It also showcased a refined system architecture that allows the system to be less customized to a specific configuration (i.e., system and configuration separation). By delivering a capable and validated MDAO system along with a set of example applications to be used as a template for future users, this work greatly expands NASA's high-fidelity, physics-based MDAO capabilities and enables the design of revolutionary vehicles in a cost-effective manner. This proposed work complements M4 Engineering's expertise in developing modeling and simulation toolsets that solve relevant subsonic, supersonic, and hypersonic demonstration applications.

CSI Index Of Customer's Satisfaction Applied In The Area Of Public Transport

NASA Astrophysics Data System (ADS)

Poliaková, Adela

2015-06-01

In Western countries, the new visions are applied in quality control for an integrated public transport system. Public transport puts the customer at the centre of our decision making in achieving customer satisfaction with provided service. Sustainable surveys are kept among customers. A lot of companies are collecting huge databases containing over 30,000 voices of customers, which demonstrates the current satisfaction levels across the public transport service. Customer satisfaction with a provided service is a difficult task. In this service, the quality criteria are not clearly defined, and it is therefore difficult to define customer satisfaction. The paper introduces a possibility of CSI index application in conditions of the Slovak Republic transport area.

sscMap: an extensible Java application for connecting small-molecule drugs using gene-expression signatures.

PubMed

Zhang, Shu-Dong; Gant, Timothy W

2009-07-31

Connectivity mapping is a process to recognize novel pharmacological and toxicological properties in small molecules by comparing their gene expression signatures with others in a database. A simple and robust method for connectivity mapping with increased specificity and sensitivity was recently developed, and its utility demonstrated using experimentally derived gene signatures. This paper introduces sscMap (statistically significant connections' map), a Java application designed to undertake connectivity mapping tasks using the recently published method. The software is bundled with a default collection of reference gene-expression profiles based on the publicly available dataset from the Broad Institute Connectivity Map 02, which includes data from over 7000 Affymetrix microarrays, for over 1000 small-molecule compounds, and 6100 treatment instances in 5 human cell lines. In addition, the application allows users to add their custom collections of reference profiles and is applicable to a wide range of other 'omics technologies. The utility of sscMap is two fold. First, it serves to make statistically significant connections between a user-supplied gene signature and the 6100 core reference profiles based on the Broad Institute expanded dataset. Second, it allows users to apply the same improved method to custom-built reference profiles which can be added to the database for future referencing. The software can be freely downloaded from http://purl.oclc.org/NET/sscMap.

Augmented Reality Implementation in Watch Catalog as e-Marketing Based on Mobile Aplication

NASA Astrophysics Data System (ADS)

Adrianto, D.; Luwinda, F. A.; Yesmaya, V.

2017-01-01

Augmented Reality is one of important methods to provide user with a better interactive user interface. In this research, Augmented Reality in Mobile Application will be applied to provide user with useful information related with Watch Catalogue. This research will be focused on design and implementation an application using Augmented Reality. The process model used in this research is Extreme Programming. Extreme Programming have a several steps which are planning, design, coding, and testing. The result of this research is Augmented Reality application based on Android. This research will be conclude that implementation of Augmented Reality based on Android in Watch Catalogue will help customer to collect the useful information related to the specific object of watch.

Benefits and Limitations of Protein Hydrolysates as Components of Serum-Free Media for Animal Cell Culture Applications

NASA Astrophysics Data System (ADS)

Lobo-Alfonso, Juliet; Price, Paul; Jayme, David

Increased understanding of influential factors for the cultivation of animal cells, combined with heightened regulatory concern over potential transmission of adventitious contaminants associated with serum and other animal-derived components, has elevated interest in using protein hydrolysates as serum replacements or nutrient supplements. This paper reviews the chemistry and biology of various hydrolysates derived from animal, plant and microbial sources. It provides specific examples of a beneficial selection of plant and yeast hydrolysates as ingredients of serum-free nutrient formulations for bioproduction applications of cultured mammalian and insect cells. Strategies for customizing and optimizing nutrients for specialized applications and general benefits and limitations of protein hydrolysates for biopharmaceutical production are also discussed.

QWIP status and future trends at Thales

NASA Astrophysics Data System (ADS)

Bois, P.; Guériaux, V.; Briere de l'Isle, N.; Manissadjian, A.; Facoetti, H.; Marcadet, X.; Costard, E.; Nedelcu, A.

2012-01-01

Since 2005, Thales is successfully manufacturing QWIPs in high rate production through III-V Lab. All the early claimed advantages of QWIPs are now demonstrated. The versatility of the band-gap engineering allows the custom design of detectors to fulfill specific application requirements in MWIR, LWIR or VLWIR ranges. The maturity of the III-V microelectronics based on GaAs substrates gives uniformity, stability and high production rate. In this presentation we will discuss the specific advantages of this type of detector. An overview of the available performances and production status will be presented including under-development products such as dual band and polarimetric sensors.

3D Systems' Technology Overview and New Applications in Manufacturing, Engineering, Science, and Education

PubMed Central

Andrews, Mike; Weislogel, Mark; Moeck, Peter; Stone-Sundberg, Jennifer; Birkes, Derek; Hoffert, Madeline Paige; Lindeman, Adam; Morrill, Jeff; Fercak, Ondrej; Friedman, Sasha; Gunderson, Jeff; Ha, Anh; McCollister, Jack; Chen, Yongkang; Geile, John; Wollman, Andrew; Attari, Babak; Botnen, Nathan; Vuppuluri, Vasant; Shim, Jennifer; Kaminsky, Werner; Adams, Dustin; Graft, John

2014-01-01

Abstract Since the inception of 3D printing, an evolutionary process has taken place in which specific user and customer needs have crossed paths with the capabilities of a growing number of machines to create value-added businesses. Even today, over 30 years later, the growth of 3D printing and its utilization for the good of society is often limited by the various users' understanding of the technology for their specific needs. This article presents an overview of current 3D printing technologies and shows numerous examples from a multitude of fields from manufacturing to education. PMID:28473997

Application Processing | Distributed Generation Interconnection

Science.gov Websites

delivering swift customer service. The rapid rise of distributed generation (DG) PV interconnection speed processing, reduce paperwork, and improve customer service. Webinars and publications are

Application of text mining for customer evaluations in commercial banking

NASA Astrophysics Data System (ADS)

Tan, Jing; Du, Xiaojiang; Hao, Pengpeng; Wang, Yanbo J.

2015-07-01

Nowadays customer attrition is increasingly serious in commercial banks. To combat this problem roundly, mining customer evaluation texts is as important as mining customer structured data. In order to extract hidden information from customer evaluations, Textual Feature Selection, Classification and Association Rule Mining are necessary techniques. This paper presents all three techniques by using Chinese Word Segmentation, C5.0 and Apriori, and a set of experiments were run based on a collection of real textual data that includes 823 customer evaluations taken from a Chinese commercial bank. Results, consequent solutions, some advice for the commercial bank are given in this paper.

76 FR 58741 - Storage Reporting Requirements of Interstate and Intrastate Natural Gas Companies

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-22

... sets of pipelines must include: (1) The identity of each customer injecting gas into storage and/or withdrawing gas from storage (including, for interstate pipelines, any affiliate relationship), (2) The rate... applicable to each storage customer, (4) For each storage customer, the volume of gas (in dekatherms...

77 FR 4220 - Storage Reporting Requirements of Interstate and Intrastate Natural Gas Companies

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-27

.... The reports by the two sets of pipelines must include: (1) the identity of each customer injecting gas... relationship), (2) the rate schedule (for interstate pipelines) or docket number (for intrastate pipelines... maximum daily withdrawal quantity applicable to each storage customer, (4) for each storage customer, the...

A Customer Service Approach to Advising: Theory and Application.

ERIC Educational Resources Information Center

Spicuzza, Frank J.

1992-01-01

The customer service marketing model provides an organizing strategy for advising in higher education. The university contributes resources for an advising process that addresses needs and expectations of students as customers and faculty as providers. This model is evident in a recent survey of 58 bachelor's degree recipients in social work. (MSE)

Saying What We Will Do, and Doing What We Say: Implementing a Customer Service Plan.

ERIC Educational Resources Information Center

Wehmeyer, Susan; And Others

1996-01-01

Contends that the corporate literature on customer service is significantly applicable to academic libraries, and chronicles the development, implementation, and evaluation of a customer pledge at the Wright State University Libraries in Dayton, Ohio. The text of the fall 1995 version of the service pledge is appended. (BEW)

78 FR 16701 - Agency Information Collection Activities: Application for Foreign Trade Zone and/or Status...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-18

... DEPARTMENT OF HOMELAND SECURITY U.S. Customs and Border Protection Agency Information Collection... Zone Activity Permit AGENCY: U.S. Customs and Border Protection (CBP), Department of Homeland Security...-0029. SUMMARY: U.S. Customs and Border Protection (CBP) of the Department of Homeland Security will be...

19 CFR 144.41 - Entry for rewarehouse.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 19 Customs Duties 2 2012-04-01 2012-04-01 false Entry for rewarehouse. 144.41 Section 144.41 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY (CONTINUED) WAREHOUSE AND REWAREHOUSE ENTRIES AND WITHDRAWALS Rewarehouse Entries § 144.41 Entry for rewarehouse. (a) Applicability. When...

19 CFR 144.41 - Entry for rewarehouse.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 19 Customs Duties 2 2014-04-01 2014-04-01 false Entry for rewarehouse. 144.41 Section 144.41 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY (CONTINUED) WAREHOUSE AND REWAREHOUSE ENTRIES AND WITHDRAWALS Rewarehouse Entries § 144.41 Entry for rewarehouse. (a) Applicability. When...

19 CFR 144.41 - Entry for rewarehouse.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 2 2011-04-01 2011-04-01 false Entry for rewarehouse. 144.41 Section 144.41 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY (CONTINUED) WAREHOUSE AND REWAREHOUSE ENTRIES AND WITHDRAWALS Rewarehouse Entries § 144.41 Entry for rewarehouse. (a) Applicability. When...

19 CFR 144.41 - Entry for rewarehouse.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 2 2010-04-01 2010-04-01 false Entry for rewarehouse. 144.41 Section 144.41 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY (CONTINUED) WAREHOUSE AND REWAREHOUSE ENTRIES AND WITHDRAWALS Rewarehouse Entries § 144.41 Entry for rewarehouse. (a) Applicability. When...

19 CFR 144.41 - Entry for rewarehouse.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 19 Customs Duties 2 2013-04-01 2013-04-01 false Entry for rewarehouse. 144.41 Section 144.41 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY (CONTINUED) WAREHOUSE AND REWAREHOUSE ENTRIES AND WITHDRAWALS Rewarehouse Entries § 144.41 Entry for rewarehouse. (a) Applicability. When...

10 CFR 905.15 - What are the requirements for the small customer plan alternative?

Code of Federal Regulations, 2011 CFR

2011-01-01

... all reasonable opportunities to meet future energy service requirements using demand-side management... applicable, and contact person; (ii) Type of customer; (iii) Current energy and demand profiles and data on... and demand use for end-use customers; (iv) Future energy services projections; (v) How items in...

ColorTree: a batch customization tool for phylogenic trees

PubMed Central

Chen, Wei-Hua; Lercher, Martin J

2009-01-01

Background Genome sequencing projects and comparative genomics studies typically aim to trace the evolutionary history of large gene sets, often requiring human inspection of hundreds of phylogenetic trees. If trees are checked for compatibility with an explicit null hypothesis (e.g., the monophyly of certain groups), this daunting task is greatly facilitated by an appropriate coloring scheme. Findings In this note, we introduce ColorTree, a simple yet powerful batch customization tool for phylogenic trees. Based on pattern matching rules, ColorTree applies a set of customizations to an input tree file, e.g., coloring labels or branches. The customized trees are saved to an output file, which can then be viewed and further edited by Dendroscope (a freely available tree viewer). ColorTree runs on any Perl installation as a stand-alone command line tool, and its application can thus be easily automated. This way, hundreds of phylogenic trees can be customized for easy visual inspection in a matter of minutes. Conclusion ColorTree allows efficient and flexible visual customization of large tree sets through the application of a user-supplied configuration file to multiple tree files. PMID:19646243

ColorTree: a batch customization tool for phylogenic trees.

PubMed

Chen, Wei-Hua; Lercher, Martin J

2009-07-31

Genome sequencing projects and comparative genomics studies typically aim to trace the evolutionary history of large gene sets, often requiring human inspection of hundreds of phylogenetic trees. If trees are checked for compatibility with an explicit null hypothesis (e.g., the monophyly of certain groups), this daunting task is greatly facilitated by an appropriate coloring scheme. In this note, we introduce ColorTree, a simple yet powerful batch customization tool for phylogenic trees. Based on pattern matching rules, ColorTree applies a set of customizations to an input tree file, e.g., coloring labels or branches. The customized trees are saved to an output file, which can then be viewed and further edited by Dendroscope (a freely available tree viewer). ColorTree runs on any Perl installation as a stand-alone command line tool, and its application can thus be easily automated. This way, hundreds of phylogenic trees can be customized for easy visual inspection in a matter of minutes. ColorTree allows efficient and flexible visual customization of large tree sets through the application of a user-supplied configuration file to multiple tree files.

Performance Evaluation of NoSQL Databases: A Case Study

DTIC Science & Technology

2015-02-01

a centralized relational database. The customer decided to consider NoSQL technologies for two specific uses, namely:  the primary data store for...17 custom specific 6. FU NoSQL availab data mo arking of data g a specific wo sin benchmark f hmark for tran le workload de o publish meas their...The choice of a particular NoSQL database imposes a specific distributed software architecture and data model, and is a major determinant of the

Data mining application in customer relationship management for hospital inpatients.

PubMed

Lee, Eun Whan

2012-09-01

This study aims to discover patients loyal to a hospital and model their medical service usage patterns. Consequently, this study proposes a data mining application in customer relationship management (CRM) for hospital inpatients. A recency, frequency, monetary (RFM) model has been applied toward 14,072 patients discharged from a university hospital. Cluster analysis was conducted to segment customers, and it modeled the patterns of the loyal customers' medical services usage via a decision tree. Patients were divided into two groups according to the variables of the RFM model and the group which had significantly high frequency of medical use and expenses was defined as loyal customers, a target market. As a result of the decision tree, the predictable factors of the loyal clients were; length of stay, certainty of selectable treatment, surgery, number of accompanying treatments, kind of patient room, and department from which they were discharged. Particularly, this research showed that when a patient within the internal medicine department who did not have surgery stayed for more than 13.5 days, their probability of being a classified as a loyal customer was 70.0%. To discover a hospital's loyal patients and model their medical usage patterns, the application of data-mining has been suggested. This paper suggests practical use of combining segmentation, targeting, positioning (STP) strategy and the RFM model with data-mining in CRM.

Data Mining Application in Customer Relationship Management for Hospital Inpatients

PubMed Central

2012-01-01

Objectives This study aims to discover patients loyal to a hospital and model their medical service usage patterns. Consequently, this study proposes a data mining application in customer relationship management (CRM) for hospital inpatients. Methods A recency, frequency, monetary (RFM) model has been applied toward 14,072 patients discharged from a university hospital. Cluster analysis was conducted to segment customers, and it modeled the patterns of the loyal customers' medical services usage via a decision tree. Results Patients were divided into two groups according to the variables of the RFM model and the group which had significantly high frequency of medical use and expenses was defined as loyal customers, a target market. As a result of the decision tree, the predictable factors of the loyal clients were; length of stay, certainty of selectable treatment, surgery, number of accompanying treatments, kind of patient room, and department from which they were discharged. Particularly, this research showed that when a patient within the internal medicine department who did not have surgery stayed for more than 13.5 days, their probability of being a classified as a loyal customer was 70.0%. Conclusions To discover a hospital's loyal patients and model their medical usage patterns, the application of data-mining has been suggested. This paper suggests practical use of combining segmentation, targeting, positioning (STP) strategy and the RFM model with data-mining in CRM. PMID:23115740

Customer satisfaction.

PubMed

Vukmir, Rade B

2006-01-01

This paper seeks to present an analysis of the literature examining objective information concerning the subject of customer service, as it applies to the current medical practice. Hopefully, this information will be synthesized to generate a cogent approach to correlate customer service with quality. Articles were obtained by an English language search of MEDLINE from January 1976 to July 2005. This computerized search was supplemented with literature from the author's personal collection of peer-reviewed articles on customer service in a medical setting. This information was presented in a qualitative fashion. There is a significant lack of objective data correlating customer service objectives, patient satisfaction and quality of care. Patients present predominantly for the convenience of emergency department care. Specifics of satisfaction are directed to the timing, and amount of "caring". Demographic correlates including symptom presentation, practice style, location and physician issues directly impact on satisfaction. It is most helpful to develop a productive plan for the "difficult patient", emphasizing communication and empathy. Profiling of the customer satisfaction experience is best accomplished by examining the specifics of satisfaction, nature of the ED patient, demographic profile, symptom presentation and physician interventions emphasizing communication--especially with the difficult patient. The current emergency medicine customer service dilemmas are a complex interaction of both patient and physician factors specifically targeting both efficiency and patient satisfaction. Awareness of these issues particular to the emergency patient can help to maximize efficiency, minimize subsequent medicolegal risk and improve patient care if a tailored management plan is formulated.

75 FR 13699 - Customs Broker Recordkeeping Requirements Regarding Location and Method of Record Retention

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-23

... Regarding Location and Method of Record Retention AGENCY: Customs and Border Protection, Department of... recordkeeping requirements as they pertain to the location and method of record retention. Specifically, Customs... comments, identified by USCBP docket number, by one of the following methods: Federal eRulemaking Portal...

75 FR 12437 - Privacy Act of 1974: Implementation of Exemptions; U.S. Immigration and Customs Enforcement-006...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-16

... of 1974: Implementation of Exemptions; U.S. Immigration and Customs Enforcement--006 Intelligence... Intelligence Records System'' from certain provisions of the Privacy Act. Specifically, the Department exempts portions of the Immigration and Customs Enforcement Intelligence Records System from one or more provisions...

Custom Sewing, Modules One, Two, and Three. Instructor Guide.

ERIC Educational Resources Information Center

Missouri Univ., Columbia. Instructional Materials Lab.

This document consists of three modules designed for a custom apparel and garment sewing program teaching students to construct, alter, and prepare garments and home fashions to customer specifications. Each module includes some or all of the following components: performance objectives, lesson plans, suggested activities, information sheets,…

A vigorous approach to customer service.

PubMed

Pollock, E K

1993-01-01

PPG Industries, Inc. is the world's largest supplier of automotive original coatings. Its business-to-business customers require individualized service based on specific requirements. The company has solidified these relationships by establishing satellite supply facilities, applying the quality process to problem solving, and providing a variety of outlets for customer feedback.

Quality Dashboards: Technical and Architectural Considerations of an Actionable Reporting Tool for Population Management

PubMed Central

Olsha-Yehiav, Maya; Einbinder, Jonathan S.; Jung, Eunice; Linder, Jeffrey A.; Greim, Julie; Li, Qi; Schnipper, Jeffrey L.; Middleton, Blackford

2006-01-01

Quality Dashboards (QD) is a condition-specific, actionable web-based application for quality reporting and population management that is integrated into the Electronic Health Record (EHR). Using server-based graphic web controls in a .Net environment to construct Quality Dashboards allows customization of the reporting tool without the need to rely on commercial business intelligence tool. Quality Dashboards will improve patient care and quality outcomes as clinicians utilize the reporting tool for population management. PMID:17238671

Study of Potential Standardization of Digital Freeze Frame Video Codecs.

DTIC Science & Technology

1984-01-01

and MAR track an input clock over a very wide range. These are dependent on the modem used in any specific application. Interface connectors are those...terminals, 56K bit digital transmission sets). We have a limited custan capability and are not in the custom unit business. 1.,o .2e e.. , , 4g..2. . j...will) are designed for narrowband operation. We build our own modems which send .’e- pixels at a rate of 1969 pixels/second. Grey scale information is

Explaining, not just predicting, drives interest in personal genomics.

PubMed

Meisel, Susanne F; Carere, Deanna Alexis; Wardle, Jane; Kalia, Sarah S; Moreno, Tanya A; Mountain, Joanna L; Roberts, J Scott; Green, Robert C

2015-01-01

There is a widespread assumption that risk prediction is the major driver of customer interest in personal genomic testing (PGT). However, some customers may also be motivated by finding out whether their existing diseases have a genetic etiology. We evaluated the impact of an existing medical diagnosis on customer interest in condition-specific results from PGT. Using a prospective online survey of PGT customers, we measured customer interest prior to receiving PGT results for 11 health conditions, and examined the association between interest and personal medical history of these conditions using logistic regression. We analyzed data from 1,538 PGT customers, mean age 48.7 years, 61 % women, 90 % White, and 47 % college educated. The proportion of customers who were 'very interested' in condition-specific PGT varied considerably, from 28 % for ulcerative colitis to 68% for heart disease. After adjusting for demographic and personal characteristics including family history, having a diagnosis of the condition itself was significantly associated with interest in genetic testing for risk of that condition, with odds ratios ranging from 2.07 (95 % CI 1.28-3.37) for diabetes to 19.99 (95 % CI 4.57-87.35) for multiple sclerosis. PGT customers are particularly interested in genetic markers for their existing medical conditions, suggesting that the value of genetic testing is not only predictive, but also explanatory.

A study of applications scribe frame data verifications using design rule check

NASA Astrophysics Data System (ADS)

Saito, Shoko; Miyazaki, Masaru; Sakurai, Mitsuo; Itoh, Takahisa; Doi, Kazumasa; Sakurai, Norioko; Okada, Tomoyuki

2013-06-01

In semiconductor manufacturing, scribe frame data generally is generated for each LSI product according to its specific process design. Scribe frame data is designed based on definition tables of scanner alignment, wafer inspection and customers specified marks. We check that scribe frame design is conforming to specification of alignment and inspection marks at the end. Recently, in COT (customer owned tooling) business or new technology development, there is no effective verification method for the scribe frame data, and we take a lot of time to work on verification. Therefore, we tried to establish new verification method of scribe frame data by applying pattern matching and DRC (Design Rule Check) which is used in device verification. We would like to show scheme of the scribe frame data verification using DRC which we tried to apply. First, verification rules are created based on specifications of scanner, inspection and others, and a mark library is also created for pattern matching. Next, DRC verification is performed to scribe frame data. Then the DRC verification includes pattern matching using mark library. As a result, our experiments demonstrated that by use of pattern matching and DRC verification our new method can yield speed improvements of more than 12 percent compared to the conventional mark checks by visual inspection and the inspection time can be reduced to less than 5 percent if multi-CPU processing is used. Our method delivers both short processing time and excellent accuracy when checking many marks. It is easy to maintain and provides an easy way for COT customers to use original marks. We believe that our new DRC verification method for scribe frame data is indispensable and mutually beneficial.

Customer requirements process

NASA Technical Reports Server (NTRS)

Russell, Yvonne; Falsetti, Christine M.

1991-01-01

Customer requirements are presented through three viewgraphs. One graph presents the range of services, which include requirements management, network engineering, operations, and applications support. Another viewgraph presents the project planning process. The third viewgraph presents the programs and/or projects actively supported including life sciences, earth science and applications, solar system exploration, shuttle flight engineering, microgravity science, space physics, and astrophysics.

15 CFR 301.4 - Processing of applications by the Department of the Treasury (Customs and Border Protection).

Code of Federal Regulations, 2010 CFR

2010-01-01

... 15 Commerce and Foreign Trade 2 2010-01-01 2010-01-01 false Processing of applications by the Department of the Treasury (Customs and Border Protection). 301.4 Section 301.4 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign Trade (Continued) INTERNATIONAL TRADE ADMINISTRATION, DEPARTMENT...

Linking service quality, customer satisfaction, and behavioral intention.

PubMed

Woodside, A G; Frey, L L; Daly, R T

1989-12-01

Based on the service quality and script theory literature, a framework of relationships among service quality, customer satisfaction, and behavioral intention for service purchases is proposed. Specific models are developed from the general framework and the models are applied and tested for the highly complex and divergent consumer service of overnight hospital care. Service quality, customer satisfaction, and behavioral intention data were collected from recent patients of two hospitals. The findings support the specific models and general framework. Implications for theory, service marketing, and future research are discussed.

In the year 2525, if x ray is still alive, if lithography can survive, they may find...

NASA Astrophysics Data System (ADS)

Nistler, John L.; Michael, Mark; Hause, Fred N.; Edwards, Richard D.

1998-12-01

Data and discussions will be presented on the NTRM, National Technology Roadmap, for reticles based on a Process Integration perception. Specifically two layers are considered for this paper, the gate layer which is primarily a chrome geometry mask with a lot of open glass and a local interconnect layer which is primarily a chrome plate using clear geometries. Information from other sources is used where appropriate and actual in-house data is used to illustrate specific points. Realizing that demands from different customers for specific types of features tend to drive specific mask makers and their decisions on equipment purchases and processes. We attempt to help predict where Integration approaches have either caused a lag in technology pushes or have actually speeded up certain requirements. Discussions of integration requirements, which tend to push maskmakers, will be presented. Along with typical design approaches in OPC and PSM which either will push technology or actually slow down the trend towards smaller geometries. In addition, data will be presented showing how specific stepper characteristics may actually drive the customer's criteria, thus changing the requirements from customer to customer.

The method to divide a sentence of requirement into individual requirements and the development of requirement specification editor which can describe individual requirements.

PubMed

Sato, Kuniya; Ooba, Masahiro; Takagi, Tomohiko; Furukawa, Zengo; Komiya, Seiichi; Yaegashi, Rihito

2013-12-01

Agile software development gains requirements from the direct discussion with customers and the development staff each time, and the customers evaluate the appropriateness of the requirement. If the customers divide the complicated requirement into individual requirements, the engineer who is in charge of software development can understand it easily. This is called division of requirement. However, the customers do not understand how much and how to divide the requirements. This paper proposes the method to divide a complicated requirement into individual requirements. Also, it shows the development of requirement specification editor which can describe individual requirements. The engineer who is in charge of software development can understand requirements easily.

Understanding Customers: The Jobs to Be Done Theory Applied in the Context of a Rural Food Pantry.

PubMed

Vaterlaus, J Mitchell; Cottle, Natalie Martineau; Patten, Emily Vaterlaus; Gibbons, Robyn

2018-04-28

Food insecurity, and particularly rural food insecurity, has unique challenges associated with it. Understanding the customer or patron needs is increasingly important in resolving this national concern. The Jobs to Be Done Theory posits that when considering customers, it is beneficial to move past demographic profiling and focus on what the customer wants to accomplish by using a particular product or service. This qualitative study aimed to determine customers' jobs to be done at a rural food pantry. In addition, it seeks to demonstrate the application of contemporary management theory to dietetics practice. A case study approach was used in this study. Case study data collection procedures included six male and six female food pantry patrons in Montana completing in-depth, audio-recorded interviews and surveys. Each person's interview and survey were constructed into individual case descriptions; the case descriptions were analyzed using uniform categories determined by researchers. To identify themes in the holistic case, word tables were created for each uniform category and assessed for key themes representing patrons' experiences. The key themes that emerged were the customer in context, customers' food relief needs, connecting with customers, and barriers to utilization. The application of Jobs to Be Done Theory to rural food pantry customers demonstrates that demographic segmentation does not capture the social, emotional, and functional dimensions for this sample. Investigation of customer experiences, circumstances, and obstacles is important for improving dietetics services. Copyright © 2018 Academy of Nutrition and Dietetics. Published by Elsevier Inc. All rights reserved.

Engineering Software Suite Validates System Design

NASA Technical Reports Server (NTRS)

2007-01-01

EDAptive Computing Inc.'s (ECI) EDAstar engineering software tool suite, created to capture and validate system design requirements, was significantly funded by NASA's Ames Research Center through five Small Business Innovation Research (SBIR) contracts. These programs specifically developed Syscape, used to capture executable specifications of multi-disciplinary systems, and VectorGen, used to automatically generate tests to ensure system implementations meet specifications. According to the company, the VectorGen tests considerably reduce the time and effort required to validate implementation of components, thereby ensuring their safe and reliable operation. EDASHIELD, an additional product offering from ECI, can be used to diagnose, predict, and correct errors after a system has been deployed using EDASTAR -created models. Initial commercialization for EDASTAR included application by a large prime contractor in a military setting, and customers include various branches within the U.S. Department of Defense, industry giants like the Lockheed Martin Corporation, Science Applications International Corporation, and Ball Aerospace and Technologies Corporation, as well as NASA's Langley and Glenn Research Centers

19 CFR 351.503 - Benefit.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 19 Customs Duties 3 2012-04-01 2012-04-01 false Benefit. 351.503 Section 351.503 Customs Duties... and Measurement of Countervailable Subsidies § 351.503 Benefit. (a) Specific rules. In the case of a government program for which a specific rule for the measurement of a benefit is contained in this subpart E...

19 CFR 351.503 - Benefit.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 19 Customs Duties 3 2014-04-01 2014-04-01 false Benefit. 351.503 Section 351.503 Customs Duties... and Measurement of Countervailable Subsidies § 351.503 Benefit. (a) Specific rules. In the case of a government program for which a specific rule for the measurement of a benefit is contained in this subpart E...

19 CFR 351.503 - Benefit.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 19 Customs Duties 3 2013-04-01 2013-04-01 false Benefit. 351.503 Section 351.503 Customs Duties... and Measurement of Countervailable Subsidies § 351.503 Benefit. (a) Specific rules. In the case of a government program for which a specific rule for the measurement of a benefit is contained in this subpart E...

19 CFR 351.503 - Benefit.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 3 2011-04-01 2011-04-01 false Benefit. 351.503 Section 351.503 Customs Duties... and Measurement of Countervailable Subsidies § 351.503 Benefit. (a) Specific rules. In the case of a government program for which a specific rule for the measurement of a benefit is contained in this subpart E...

Marketing service guarantees for health care.

PubMed

Levy, J S

1999-01-01

The author introduces the concept of service guarantees for application in health care and differentiates between explicit, implicit, and conditional vs. unconditional types of guarantees. An example of an unconditional guarantee of satisfaction is provided by the hospitality industry. Firms conveying an implicit guarantee are those with outstanding reputations for products such as luxury automobiles, or ultimate customer service, like Nordstrom. Federal Express and Domino's Pizza offer explicit guarantees of on-time delivery. Taking this concept into efforts to improve health care delivery involves a number of caveats. Customers invited to use exceptional service cards may use these to record either satisfaction or dissatisfaction. The cards need to provide enough specific information about issues so that "immediate action could be taken to improve processes." Front-line employees should be empowered to respond to complaints in a meaningful way to resolve the problem before the client leaves the premises.

Angular Positioning Sensor for Space Mechanisms

NASA Astrophysics Data System (ADS)

Steiner, Nicolas; Chapuis, Dominique

2013-09-01

Angular position sensors are used on various rotating mechanisms such as solar array drive mechanisms, antenna pointing mechanisms, scientific instruments, motors or actuators.Now a days, potentiometers and encoders are mainly used for angular measurement purposes. Both of them have their own pros and cons.As alternative, Ruag Space Switzerland Nyon (RSSN) is developing and qualifying two innovative technologies of angular position sensors which offer easy implementation, medium to very high lifetime and high flexibility with regards to the output signal shape/type.The Brushed angular position sensor uses space qualified processes which are already flying on RSSN's sliprings for many years. A large variety of output signal shape can be implemented to fulfill customer requirements (digital, analog, customized, etc.).The contactless angular position sensor consists in a new radiation hard Application Specific Integrated Circuit (ASIC) based on the Hall effect and providing the angular position without complex processing algorithm.

Taking it to the streets: recording medical outreach data on personal digital assistants.

PubMed

Buck, David S; Rochon, Donna; Turley, James P

2005-01-01

Carrying hundreds of patient files in a suitcase makes medical street outreach to the homeless clumsy and difficult. Healthcare for the Homeless--Houston (HHH) began a case study under the assumption that tracking patient information with a personal digital assistant (PDA) would greatly simplify the process. Equipping clinicians with custom-designed software loaded onto Palm V Handheld Computers (palmOne, Inc, Milpitas, CA), Healthcare for the Homeless--Houston assessed how this type of technology augmented medical care during street outreach to the homeless in a major metropolitan area. Preliminary evidence suggests that personal digital assistants free clinicians to focus on building relationships instead of recreating documentation during patient encounters. However, the limits of the PDA for storing and retrieving data made it impractical long-term. This outcome precipitated a new study to test the feasibility of tablet personal computers loaded with a custom-designed software application specific to the needs of homeless street patients.

Detecting single-abasic residues within a DNA strand immobilized in a biological nanopore using an integrated CMOS sensor.

PubMed

Kim, Jungsuk; Maitra, Raj D; Pedrotti, Ken; Dunbar, William B

2013-02-01

In this paper, we demonstrate the application of a novel current-measuring sensor (CMS) customized for nanopore applications. The low-noise CMS is fabricated in a 0.35μm CMOS process and is implemented in experiments involving DNA captured in an α-hemolysin (α-HL) nanopore. Specifically, the CMS is used to build a current amplitude map as a function of varying positions of a single-abasic residue within a homopolymer cytosine single-stranded DNA (ssDNA) that is captured and held in the pore. Each ssDNA is immobilized using a biotin-streptavidin linkage. Five different DNA templates are measured and compared: one all-cytosine ssDNA, and four with a single-abasic residue substitution that resides in or near the ~1.5nm aperture of the α-HL channel when the strand is immobilized. The CMOS CMS is shown to resolves the ~5Å displacements of the abasic residue within the varying templates. The demonstration represents an advance in application-specific circuitry that is optimized for small-footprint nanopore applications, including genomic sequencing.

A visual approach to efficient analysis and quantification of ductile iron and reinforced sprayed concrete.

PubMed

Fritz, Laura; Hadwiger, Markus; Geier, Georg; Pittino, Gerhard; Gröller, M Eduard

2009-01-01

This paper describes advanced volume visualization and quantification for applications in non-destructive testing (NDT), which results in novel and highly effective interactive workflows for NDT practitioners. We employ a visual approach to explore and quantify the features of interest, based on transfer functions in the parameter spaces of specific application scenarios. Examples are the orientations of fibres or the roundness of particles. The applicability and effectiveness of our approach is illustrated using two specific scenarios of high practical relevance. First, we discuss the analysis of Steel Fibre Reinforced Sprayed Concrete (SFRSpC). We investigate the orientations of the enclosed steel fibres and their distribution, depending on the concrete's application direction. This is a crucial step in assessing the material's behavior under mechanical stress, which is still in its infancy and therefore a hot topic in the building industry. The second application scenario is the designation of the microstructure of ductile cast irons with respect to the contained graphite. This corresponds to the requirements of the ISO standard 945-1, which deals with 2D metallographic samples. We illustrate how the necessary analysis steps can be carried out much more efficiently using our system for 3D volumes. Overall, we show that a visual approach with custom transfer functions in specific application domains offers significant benefits and has the potential of greatly improving and optimizing the workflows of domain scientists and engineers.

Developing customer databases.

PubMed

Rao, S K; Shenbaga, S

2000-01-01

There is a growing consensus among pharmaceutical companies that more product and customer-specific approaches to marketing and selling a new drug can result in substantial increases in sales. Marketers and researchers taking a proactive micro-marketing approach to identifying, profiling, and communicating with target customers are likely to facilitate such approaches and outcomes. This article provides a working framework for creating customer databases that can be effectively mined to achieve a variety of such marketing and sales force objectives.

A study on reliability of power customer in distribution network

NASA Astrophysics Data System (ADS)

Liu, Liyuan; Ouyang, Sen; Chen, Danling; Ma, Shaohua; Wang, Xin

2017-05-01

The existing power supply reliability index system is oriented to power system without considering actual electricity availability in customer side. In addition, it is unable to reflect outage or customer’s equipment shutdown caused by instantaneous interruption and power quality problem. This paper thus makes a systematic study on reliability of power customer. By comparing with power supply reliability, reliability of power customer is defined and extracted its evaluation requirements. An indexes system, consisting of seven customer indexes and two contrast indexes, are designed to describe reliability of power customer from continuity and availability. In order to comprehensively and quantitatively evaluate reliability of power customer in distribution networks, reliability evaluation method is proposed based on improved entropy method and the punishment weighting principle. Practical application has proved that reliability index system and evaluation method for power customer is reasonable and effective.

48 CFR 52.222-53 - Exemption from Application of the Service Contract Act to Contracts for Certain Services...

Code of Federal Regulations, 2010 CFR

2010-10-01

... offered and sold regularly to non-Governmental customers, and are provided by the Contractor to the... inspection by customers, and states prices at which sales currently, or were last, made to a significant... these employees and for equivalent employees servicing commercial customers. (e)(1) Except for services...

Customizing microarrays for neuroscience drug discovery.

PubMed

Girgenti, Matthew J; Newton, Samuel S

2007-08-01

Microarray-based gene profiling has become the centerpiece of gene expression studies in the biological sciences. The ability to now interrogate the entire genome using a single chip demonstrates the progress in technology and instrumentation that has been made over the last two decades. Although this unbiased approach provides researchers with an immense quantity of data, obtaining meaningful insight is not possible without intensive data analysis and processing. Custom developed arrays have emerged as a viable and attractive alternative that can take advantage of this robust technology and tailor it to suit the needs and requirements of individual investigations. The ability to simplify data analysis, reduce noise and carefully optimize experimental conditions makes it a suitable tool that can be effectively utilized in neuroscience drug discovery efforts. Furthermore, incorporating recent advancements in fine focusing gene profiling to include specific cellular phenotypes can help resolve the complex cellular heterogeneity of the brain. This review surveys the use of microarray technology in neuroscience paying special attention to customized arrays and their potential in drug discovery. Novel applications of microarrays and ancillary techniques, such as laser microdissection, FAC sorting and RNA amplification, have also been discussed. The notion that a hypothesis-driven approach can be integrated into drug development programs is highlighted.

Aesthetic properties and message customization: navigating the dark side of web recruitment.

PubMed

Dineen, Brian R; Ling, Juan; Ash, Steven R; DelVecchio, Devon

2007-03-01

The authors examined recruitment message viewing time, information recall, and attraction in a Web-based context. In particular, they extended theory related to the cognitive processing of recruitment messages and found that the provision of customized information about likely fit related to increased viewing time and recall when good aesthetics were also present. A 3-way interaction among moderate-to low-fitting individuals further indicated that objective fit was most strongly related to attraction when messages included both good aesthetics and customized information. In particular, given this combination, the poorest fitting individuals exhibited lower attraction levels, whereas more moderately fitting individuals exhibited invariant attraction levels across combinations of aesthetics and customized information. The results suggest that, given good aesthetics, customized information exerts effects mostly by causing poorly fitting individuals to be less attracted, which further suggests a means of averting the "dark side" of Web recruitment that occurs when organizations receive too many applications from poorly fitting applicants. (c) 2007 APA, all rights reserved.

75 FR 24973 - United States v. Baker Hughes Inc., et al.

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-06

... the Gulf, leading them to bid less aggressively. As a result, customers will likely experience higher... raise the price of vessel stimulation services in the Gulf. This will cause customers to pay more for... which they often compete to be designated as a customer's primary supplier, as well as for specific jobs...

12 CFR 13.100 - Obligations concerning institutional customers.

Code of Federal Regulations, 2010 CFR

2010-01-01

... to institutional customers. (b) The OCC's suitability rule (§ 13.4) is fundamental to fair dealing... under management. While the interpretation in this section is potentially applicable to any... management. ...

Application of clustering for customer segmentation in private banking

NASA Astrophysics Data System (ADS)

Yang, Xuan; Chen, Jin; Hao, Pengpeng; Wang, Yanbo J.

2015-07-01

With fierce competition in banking industry, more and more banks have realised that accurate customer segmentation is of fundamental importance, especially for the identification of those high-value customers. In order to solve this problem, we collected real data about private banking customers of a commercial bank in China, conducted empirical analysis by applying K-means clustering technique. When determine the K value, we propose a mechanism that meet both academic requirements and practical needs. Through K-means clustering, we successfully segmented the customers into three categories, and features of each group have been illustrated in details.

Application of Kansei engineering and data mining in the Thai ceramic manufacturing

NASA Astrophysics Data System (ADS)

Kittidecha, Chaiwat; Yamada, Koichi

2018-01-01

Ceramic is one of the highly competitive products in Thailand. Many Thai ceramic companies are attempting to know the customer needs and perceptions for making favorite products. To know customer needs is the target of designers and to develop a product that must satisfy customers. This research is applied Kansei Engineering (KE) and Data Mining (DM) into the customer driven product design process. KE can translate customer emotions into the product attributes. This method determines the relationships between customer feelings or Kansei words and the design attributes. Decision tree J48 and Class association rule which implemented through Waikato Environment for Knowledge Analysis (WEKA) software are used to generate a predictive model and to find the appropriate rules. In this experiment, the emotion scores were rated by 37 participants for training data and 16 participants for test data. 6 Kansei words were selected, namely, attractive, ease of drinking, ease of handing, quality, modern and durable. 10 mugs were selected as product samples. The results of this study indicate that the proposed models and rules can interpret the design product elements affecting the customer emotions. Finally, this study provides useful understanding for the application DM in KE and can be applied to a variety of design cases.

A Simulation Model for Measuring Customer Satisfaction through Employee Satisfaction

NASA Astrophysics Data System (ADS)

Zondiros, Dimitris; Konstantopoulos, Nikolaos; Tomaras, Petros

2007-12-01

Customer satisfaction is defined as a measure of how a firm's product or service performs compared to customer's expectations. It has long been a subject of research due to its importance for measuring marketing and business performance. A lot of models have been developed for its measurement. This paper propose a simulation model using employee satisfaction as one of the most important factors leading to customer satisfaction (the others being expectations and disconfirmation of expectations). Data obtained from a two-year survey in customers of banks in Greece were used. The application of three approaches regarding employee satisfaction resulted in greater customer satisfaction when there is serious effort to keep employees satisfied.

Data Mining Techniques for Customer Relationship Management

NASA Astrophysics Data System (ADS)

Guo, Feng; Qin, Huilin

2017-10-01

Data mining have made customer relationship management (CRM) a new area where firms can gain a competitive advantage, and play a key role in the firms’ management decision. In this paper, we first analyze the value and application fields of data mining techniques for CRM, and further explore how data mining applied to Customer churn analysis. A new business culture is developing today. The conventional production centered and sales purposed market strategy is gradually shifting to customer centered and service purposed. Customers’ value orientation is increasingly affecting the firms’. And customer resource has become one of the most important strategic resources. Therefore, understanding customers’ needs and discriminating the most contributed customers has become the driving force of most modern business.

Active colloids as mobile microelectrodes for unified label-free selective cargo transport.

PubMed

Boymelgreen, Alicia M; Balli, Tov; Miloh, Touvia; Yossifon, Gilad

2018-02-22

Utilization of active colloids to transport both biological and inorganic cargo has been widely examined in the context of applications ranging from targeted drug delivery to sample analysis. In general, carriers are customized to load one specific target via a mechanism distinct from that driving the transport. Here we unify these tasks and extend loading capabilities to include on-demand selection of multiple nano/micro-sized targets without the need for pre-labelling or surface functionalization. An externally applied electric field is singularly used to drive the active cargo carrier and transform it into a mobile floating electrode that can attract (trap) or repel specific targets from its surface by dielectrophoresis, enabling dynamic control of target selection, loading and rate of transport via the electric field parameters. In the future, dynamic selectivity could be combined with directed motion to develop building blocks for bottom-up fabrication in applications such as additive manufacturing and soft robotics.

Feasibility study of using statistical process control to customized quality assurance in proton therapy.

PubMed

Rah, Jeong-Eun; Shin, Dongho; Oh, Do Hoon; Kim, Tae Hyun; Kim, Gwe-Ya

2014-09-01

To evaluate and improve the reliability of proton quality assurance (QA) processes and, to provide an optimal customized tolerance level using the statistical process control (SPC) methodology. The authors investigated the consistency check of dose per monitor unit (D/MU) and range in proton beams to see whether it was within the tolerance level of the daily QA process. This study analyzed the difference between the measured and calculated ranges along the central axis to improve the patient-specific QA process in proton beams by using process capability indices. The authors established a customized tolerance level of ±2% for D/MU and ±0.5 mm for beam range in the daily proton QA process. In the authors' analysis of the process capability indices, the patient-specific range measurements were capable of a specification limit of ±2% in clinical plans. SPC methodology is a useful tool for customizing the optimal QA tolerance levels and improving the quality of proton machine maintenance, treatment delivery, and ultimately patient safety.

Research on Capturing of Customer Requirements Based on Innovation Theory

NASA Astrophysics Data System (ADS)

junwu, Ding; dongtao, Yang; zhenqiang, Bao

To exactly and effectively capture customer requirements information, a new customer requirements capturing modeling method was proposed. Based on the analysis of function requirement models of previous products and the application of technology system evolution laws of the Theory of Innovative Problem Solving (TRIZ), the customer requirements could be evolved from existing product designs, through modifying the functional requirement unit and confirming the direction of evolution design. Finally, a case study was provided to illustrate the feasibility of the proposed approach.

Reengineering Best Value Source Selection Through Process Innovation and the Selected Application of Information Technology

DTIC Science & Technology

2001-12-01

SWDIV’s current organizational structure is a direct result of a December 1995 customer survey, which revealed that SWDIV’s customers were not happy with...its services. They wanted SWDIV to be better, faster, cheaper, and easier to use. As a result of this customer feedback, and various OPNAV and...process of delivering products and services to 13 SWDIV’s customers . The RET was tasked with accomplishing the following three things: 1. Focus

Innovative Product Design Based on Comprehensive Customer Requirements of Different Cognitive Levels

PubMed Central

Zhao, Wu; Zheng, Yake; Wang, Rui; Wang, Chen

2014-01-01

To improve customer satisfaction in innovative product design, a topology structure of customer requirements is established and an innovative product approach is proposed. The topology structure provides designers with reasonable guidance to capture the customer requirements comprehensively. With the aid of analytic hierarchy process (AHP), the importance of the customer requirements is evaluated. Quality function deployment (QFD) is used to translate customer requirements into product and process design demands and pick out the technical requirements which need urgent improvement. In this way, the product is developed in a more targeted way to satisfy the customers. the theory of innovative problems solving (TRIZ) is used to help designers to produce innovative solutions. Finally, a case study of automobile steering system is used to illustrate the application of the proposed approach. PMID:25013862

Innovative product design based on comprehensive customer requirements of different cognitive levels.

PubMed

Li, Xiaolong; Zhao, Wu; Zheng, Yake; Wang, Rui; Wang, Chen

2014-01-01

To improve customer satisfaction in innovative product design, a topology structure of customer requirements is established and an innovative product approach is proposed. The topology structure provides designers with reasonable guidance to capture the customer requirements comprehensively. With the aid of analytic hierarchy process (AHP), the importance of the customer requirements is evaluated. Quality function deployment (QFD) is used to translate customer requirements into product and process design demands and pick out the technical requirements which need urgent improvement. In this way, the product is developed in a more targeted way to satisfy the customers. the theory of innovative problems solving (TRIZ) is used to help designers to produce innovative solutions. Finally, a case study of automobile steering system is used to illustrate the application of the proposed approach.

Situational Awareness Geospatial Application (iSAGA)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sher, Benjamin

Situational Awareness Geospatial Application (iSAGA) is a geospatial situational awareness software tool that uses an algorithm to extract location data from nearly any internet-based, or custom data source and display it geospatially; allows user-friendly conduct of spatial analysis using custom-developed tools; searches complex Geographic Information System (GIS) databases and accesses high resolution imagery. iSAGA has application at the federal, state and local levels of emergency response, consequence management, law enforcement, emergency operations and other decision makers as a tool to provide complete, visual, situational awareness using data feeds and tools selected by the individual agency or organization. Feeds may bemore » layered and custom tools developed to uniquely suit each subscribing agency or organization. iSAGA may similarly be applied to international agencies and organizations.« less

Generating Customized Verifiers for Automatically Generated Code

NASA Technical Reports Server (NTRS)

Denney, Ewen; Fischer, Bernd

2008-01-01

Program verification using Hoare-style techniques requires many logical annotations. We have previously developed a generic annotation inference algorithm that weaves in all annotations required to certify safety properties for automatically generated code. It uses patterns to capture generator- and property-specific code idioms and property-specific meta-program fragments to construct the annotations. The algorithm is customized by specifying the code patterns and integrating them with the meta-program fragments for annotation construction. However, this is difficult since it involves tedious and error-prone low-level term manipulations. Here, we describe an annotation schema compiler that largely automates this customization task using generative techniques. It takes a collection of high-level declarative annotation schemas tailored towards a specific code generator and safety property, and generates all customized analysis functions and glue code required for interfacing with the generic algorithm core, thus effectively creating a customized annotation inference algorithm. The compiler raises the level of abstraction and simplifies schema development and maintenance. It also takes care of some more routine aspects of formulating patterns and schemas, in particular handling of irrelevant program fragments and irrelevant variance in the program structure, which reduces the size, complexity, and number of different patterns and annotation schemas that are required. The improvements described here make it easier and faster to customize the system to a new safety property or a new generator, and we demonstrate this by customizing it to certify frame safety of space flight navigation code that was automatically generated from Simulink models by MathWorks' Real-Time Workshop.

Imaging lidar technology: development of a 3D-lidar elegant breadboard for rendezvous and docking, test results, and prospect to future sensor application

NASA Astrophysics Data System (ADS)

Moebius, B.; Pfennigbauer, M.; Pereira do Carmo, J.

2017-11-01

During the previous 15 years, Rendezvous and Docking Sensors (RVS) were developed, manufactured and qualified. In the mean time they were successfully applied in some space missions: For automatic docking of the European ATV "Jules Verne" on the International Space Station in 2008; for automatic berthing of the first Japanese HTV in 2009, and even the precursor model ARP-RVS for measurements during Shuttle Atlantis flights STS-84 and STS-86 to the MIR station. Up to now, about twenty RVS Flight Models for application on ATV, HTV and the American Cygnus Spacecraft were manufactured and delivered to the respective customers. RVS is designed for tracking of customer specific, cooperative targets (i.e. retro reflectors that are arranged in specific geometries). Once RVS has acquired the target, the sensor measures the distance to the target by timeof- flight determination of a pulsed laser beam. Any echo return provokes an interrupt signal and thus the readout of the according encoder positions of the two scan mirrors that represent Azimuth and Elevation measurement direction to the target. [2], [3]. The capability of the RVS for 3D mapping of the scene makes the fully space qualified RVS to be real 3D Lidar sensors; thus they are a sound technical base for the compact 3D Lidar breadboard that was developed in the course of the Imaging Lidar Technology (ILT) project.

Purpose-driven biomaterials research in liver-tissue engineering.

PubMed

Ananthanarayanan, Abhishek; Narmada, Balakrishnan Chakrapani; Mo, Xuejun; McMillian, Michael; Yu, Hanry

2011-03-01

Bottom-up engineering of microscale tissue ("microtissue") constructs to recapitulate partially the complex structure-function relationships of liver parenchyma has been realized through the development of sophisticated biomaterial scaffolds, liver-cell sources, and in vitro culture techniques. With regard to in vivo applications, the long-lived stem/progenitor cell constructs can improve cell engraftment, whereas the short-lived, but highly functional hepatocyte constructs stimulate host liver regeneration. With regard to in vitro applications, microtissue constructs are being adapted or custom-engineered into cell-based assays for testing acute, chronic and idiosyncratic toxicities of drugs or pathogens. Systems-level methods and computational models that represent quantitative relationships between biomaterial scaffolds, cells and microtissue constructs will further enable their rational design for optimal integration into specific biomedical applications. Copyright © 2010 Elsevier Ltd. All rights reserved.

Robotics in cardiac surgery.

PubMed

Vassiliades, Thomas A

2006-03-01

The current status of surgical telemanipulators in the field of cardiac surgery is best described as a device in search of applications, as its role has not been clearly defined. Basic robotic technological research and development needs to focus on two key areas: (a) developing methods for modeling patient and surgical procedures with the ability to employ that customized information in the successful completion of a minimally invasive operation; and (b) developing novel human machine interactions that can overcome the barriers we currently face in performing surgical tasks using telemanipulators. Significant breakthroughs in these areas will then facilitate the construction and employment of enabling robotic systems, each with its specific clinical application. Copyright 2006 John Wiley & Sons, Ltd.

Powering a wireless sensor node with a vibration-driven piezoelectric energy harvester

NASA Astrophysics Data System (ADS)

Reilly, Elizabeth K.; Burghardt, Fred; Fain, Romy; Wright, Paul

2011-12-01

This paper discusses the direct application of scavenged energy to power a wireless sensor platform. A trapezoidal piezoelectric harvester was designed for a specific machine tool application and tested for robustness and longevity as well as performance. The design focused on resonant performance and distributed strain concentrations at a given resonant frequency and acceleration. Critical issues of power coupling and conditioning between harvester and wireless platform were addressed. The wireless platform consisted of a sensor, controller, power conditioning circuitry, and a custom low power radio. The system transmitted a sensor sample once every 10 s in a scavenging environment of 0.25 g and 100 Hz for a system duty cycle of approximately 0.2%.

Dendrimers as tunable vectors of drug delivery systems and biomedical and ocular applications

PubMed Central

Kalomiraki, Marina; Thermos, Kyriaki; Chaniotakis, Nikos A

2016-01-01

Dendrimers are large polymeric structures with nanosize dimensions (1–10 nm) and unique physicochemical properties. The major advantage of dendrimers compared with linear polymers is their spherical-shaped structure. During synthesis, the size and shape of the dendrimer can be customized and controlled, so the finished macromolecule will have a specific “architecture” and terminal groups. These characteristics will determine its suitability for drug delivery, diagnostic imaging, and as a genetic material carrier. This review will focus initially on the unique properties of dendrimers and their use in biomedical applications, as antibacterial, antitumor, and diagnostic agents. Subsequently, emphasis will be given to their use in drug delivery for ocular diseases. PMID:26730187

Powder-based 3D printing for bone tissue engineering.

PubMed

Brunello, G; Sivolella, S; Meneghello, R; Ferroni, L; Gardin, C; Piattelli, A; Zavan, B; Bressan, E

2016-01-01

Bone tissue engineered 3-D constructs customized to patient-specific needs are emerging as attractive biomimetic scaffolds to enhance bone cell and tissue growth and differentiation. The article outlines the features of the most common additive manufacturing technologies (3D printing, stereolithography, fused deposition modeling, and selective laser sintering) used to fabricate bone tissue engineering scaffolds. It concentrates, in particular, on the current state of knowledge concerning powder-based 3D printing, including a description of the properties of powders and binder solutions, the critical phases of scaffold manufacturing, and its applications in bone tissue engineering. Clinical aspects and future applications are also discussed. Copyright © 2016 Elsevier Inc. All rights reserved.

AGM: A DSL for mobile cloud computing based on directed graph

NASA Astrophysics Data System (ADS)

Tanković, Nikola; Grbac, Tihana Galinac

2016-06-01

This paper summarizes a novel approach for consuming a domain specific language (DSL) by transforming it to a directed graph representation persisted by a graph database. Using such specialized database enables advanced navigation trough the stored model exposing only relevant subsets of meta-data to different involved services and components. We applied this approach in a mobile cloud computing system and used it to model several mobile applications in retail, supply chain management and merchandising domain. These application are distributed in a Software-as-a-Service (SaaS) fashion and used by thousands of customers in Croatia. We report on lessons learned and propose further research on this topic.

Application of Emerging Open-source Embedded Systems for Enabling Low-cost Wireless Mini-observatory Nodes in the Coastal Zone

NASA Astrophysics Data System (ADS)

Glazer, B. T.

2016-02-01

Here, we describe the development of novel, low-cost, open-source instrumentation to enable wireless data transfer of biogeochemical sensors in the coastal zone. The platform is centered upon the Beaglebone Black single board computer. Process-inquiry in environmental sciences suffers from undersampling; enabling sustained and unattended data collection typically involves expensive instrumentation and infrastructure deployed as cabled observatories with little flexibility in deployment location following initial installation. High cost of commercially-available or custom electronic packages have not only limited the number of sensor node sites that can be targeted by reasonably well-funded academic researchers, but have also entirely prohibited widespread engagement with K-12, public non-profit, and `citizen scientist' STEM audiences. The new platform under development represents a balanced blend of research-grade sensors and low-cost open-source electronics that are easily assembled. Custom, robust, open-source code that remains customizable for specific node configurations can match a specific deployment's measurement needs, depending on the scientific research priorities. We have demonstrated prototype capabilities and versatility through lab testing and field deployments of multiple sensor nodes with multiple sensor inputs, all of which are streaming near-real-time data over wireless RF links to a shore-based base station. On shore, first-pass data processing QA/QC takes place and near-real-time plots are made available on the World Wide Web. Specifically, we have worked closely with an environmental and cultural management and restoration non-profit organization, and middle and high school science classes, engaging their interest in STEM application to local watershed processes. Ultimately, continued successful development of this pilot project can lead to a coastal oceanographic analogue of the popular Weather Underground personal weather station model.

27 CFR 28.27 - Entry of wine into customs bonded warehouses.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Entry of wine into customs... Bonded Warehouses § 28.27 Entry of wine into customs bonded warehouses. Upon filing of the application or notice prescribed by § 28.122(a), wine may be withdrawn from a bonded wine cellar for transfer to any...

25 CFR 11.110 - How are tribal customs affected by this part?

Code of Federal Regulations, 2013 CFR

2013-04-01

... 25 Indians 1 2013-04-01 2013-04-01 false How are tribal customs affected by this part? 11.110 Section 11.110 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR LAW AND ORDER COURTS OF INDIAN OFFENSES AND LAW AND ORDER CODE Application; Jurisdiction § 11.110 How are tribal customs affected by this...

25 CFR 11.110 - How are tribal customs affected by this part?

Code of Federal Regulations, 2011 CFR

2011-04-01

... 25 Indians 1 2011-04-01 2011-04-01 false How are tribal customs affected by this part? 11.110 Section 11.110 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR LAW AND ORDER COURTS OF INDIAN OFFENSES AND LAW AND ORDER CODE Application; Jurisdiction § 11.110 How are tribal customs affected by this...

25 CFR 11.110 - How are tribal customs affected by this part?

Code of Federal Regulations, 2012 CFR

2012-04-01

... 25 Indians 1 2012-04-01 2011-04-01 true How are tribal customs affected by this part? 11.110 Section 11.110 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR LAW AND ORDER COURTS OF INDIAN OFFENSES AND LAW AND ORDER CODE Application; Jurisdiction § 11.110 How are tribal customs affected by this...

25 CFR 11.110 - How are tribal customs affected by this part?

Code of Federal Regulations, 2014 CFR

2014-04-01

... 25 Indians 1 2014-04-01 2014-04-01 false How are tribal customs affected by this part? 11.110 Section 11.110 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR LAW AND ORDER COURTS OF INDIAN OFFENSES AND LAW AND ORDER CODE Application; Jurisdiction § 11.110 How are tribal customs affected by this...

Hardware and software status of QCDOC

NASA Astrophysics Data System (ADS)

Boyle, P. A.; Chen, D.; Christ, N. H.; Clark, M.; Cohen, S. D.; Cristian, C.; Dong, Z.; Gara, A.; Joó, B.; Jung, C.; Kim, C.; Levkova, L.; Liao, X.; Liu, G.; Mawhinney, R. D.; Ohta, S.; Petrov, K.; Wettig, T.; Yamaguchi, A.

2004-03-01

QCDOC is a massively parallel supercomputer whose processing nodes are based on an application-specific integrated circuit (ASIC). This ASIC was custom-designed so that crucial lattice QCD kernels achieve an overall sustained performance of 50% on machines with several 10,000 nodes. This strong scalability, together with low power consumption and a price/performance ratio of $1 per sustained MFlops, enable QCDOC to attack the most demanding lattice QCD problems. The first ASICs became available in June of 2003, and the testing performed so far has shown all systems functioning according to specification. We review the hardware and software status of QCDOC and present performance figures obtained in real hardware as well as in simulation.

Embracing a Customer Service Mindset: A Fresh Examination of Services for Distance Learners

ERIC Educational Resources Information Center

Steiner, Heidi

2013-01-01

Library literature and blogs frequently discuss customer service and user experience in physical libraries and Web sites, but little is said about this mentality toward services for distance learners specifically. This paper takes customer service best practices from well-known thinkers of the business world and makes connections to services for…

Customer and Market Orientation within AACSB Member Business Schools: Comparative Views from Three Levels of Administrators

ERIC Educational Resources Information Center

Webster, Robert L.; Hammond, Kevin L.; Rothwell, James C.

2010-01-01

This paper is part of a stream of research dealing with customer and market orientation within higher education, specifically within business schools holding membership in AACSB-International. A market orientation strategy leading to a customer and market-oriented organizational culture is based upon the acceptance and adoption of the marketing…

19 CFR 191.185 - Unused merchandise drawback and merchandise not conforming to sample or specification, shipped...

Code of Federal Regulations, 2010 CFR

2010-04-01

... of the time of importation. 191.185 Section 191.185 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION... Foreign Trade Zone From Customs Territory § 191.185 Unused merchandise drawback and merchandise not... of the time of importation. (a) Procedure for filing claims. The procedures described in subpart C of...

Effects of Platform Design on the Customer Experience in an Online Solar PV Marketplace

DOE Office of Scientific and Technical Information (OSTI.GOV)

OShaughnessy, Eric J; Margolis, Robert M; Leibowicz, Benjamin

Residential solar photovoltaic (PV) customers are increasingly buying PV systems in online marketplaces, where customers can compare multiple quotes from several installers on quote platforms. In this study, we use data from an online marketplace to explore how quote platform design affects customer experiences. We analyze how four design changes affected customer experiences in terms of factors such as prices. We find that three of the four design changes are associated with statistically significant and robust price reductions, even though none of the changes were implemented specifically to reduce prices. The results suggest that even seemingly small platform design changesmore » can affect PV customer experiences in online marketplaces.« less

CEM-designer: design of custom expression microarrays in the post-ENCODE Era.

PubMed

Arnold, Christian; Externbrink, Fabian; Hackermüller, Jörg; Reiche, Kristin

2014-11-10

Microarrays are widely used in gene expression studies, and custom expression microarrays are popular to monitor expression changes of a customer-defined set of genes. However, the complexity of transcriptomes uncovered recently make custom expression microarray design a non-trivial task. Pervasive transcription and alternative processing of transcripts generate a wealth of interweaved transcripts that requires well-considered probe design strategies and is largely neglected in existing approaches. We developed the web server CEM-Designer that facilitates microarray platform independent design of custom expression microarrays for complex transcriptomes. CEM-Designer covers (i) the collection and generation of a set of unique target sequences from different sources and (ii) the selection of a set of sensitive and specific probes that optimally represents the target sequences. Probe design itself is left to third party software to ensure that probes meet provider-specific constraints. CEM-Designer is available at http://designpipeline.bioinf.uni-leipzig.de. Copyright © 2014 Elsevier B.V. All rights reserved.

Offering memorable patient experience through creative, dynamic marketing strategy

PubMed Central

Raţiu, M; Purcărea, T

2008-01-01

Creative, dynamic strategies are the ones that identify new and better ways of uniquely offering the target customers what they want or need. A business can achieve competitive advantage if it chooses a marketing strategy that sets the business apart from anyone else. Healthcare services companies have to understand that the customer should be placed in the centre of all specific marketing operations. The brand message should reflect the focus on the patient. Healthcare products and services offered must represent exactly the solutions that customers expect. The touchpoints with the patients must be well mastered in order to convince them to accept the proposed solutions. Healthcare service providers must be capable to look beyond customer's behaviour or product and healthcare service aquisition. This will demand proactive and far–reaching changes, including focusing specifically on customer preference, quality, and technological interfaces; rewiring strategy to find new value from existing and unfamiliar sources; disintegrating and radically reassembling operational processes; and restructuring the organization to accommodate new typess of work and skill. PMID:20108466

Offering memorable patient experience through creative, dynamic marketing strategy.

PubMed

Purcărea, Victor Lorín; Raţíu, Monica; Purcărea, Theodor; Davila, Carol

2008-01-01

Creative, dynamic strategies are the ones that identify new and better ways of uniquely offering the target customers what they want or need. A business can achieve competitive advantage if it chooses a marketing strategy that sets the business apart from anyone else. Healthcare services companies have to understand that the customer should be placed in the centre of all specific marketing operations. The brand message should reflect the focus on the patient. Healthcare products and services offered must represent exactly the solutions that customers expect. The touchpoints with the patients must be well mastered in order to convince them to accept the proposed solutions. Healthcare service providers must be capable to look beyond customer's behaviour or product and healthcare service aquisition. This will demand proactive and far-reaching changes, including focusing specifically on customer preference, quality, and technological interfaces; rewiring strategy to find new value from existing and unfamiliar sources: disintegrating and radically reassembling operational processes: and restructuring the organization to accommodate new types of work and skill.

Balanced performance measurement in research hospitals: the participative case study of a haematology department.

PubMed

Catuogno, Simona; Arena, Claudia; Saggese, Sara; Sarto, Fabrizia

2017-08-03

The paper aims to review, design and implement a multidimensional performance measurement system for a public research hospital in order to address the complexity of its multifaceted stakeholder requirements and its double institutional aim of care and research. The methodology relies on a participative case study performed by external researchers in close collaboration with the staff of an Italian research hospital. The paper develops and applies a customized version of balanced scorecard based on a new set of performance measures. Our findings suggest that it can be considered an effective framework for measuring the research hospital performance, thanks to a combination of generalizable and context-specific factors. By showing how the balanced scorecard framework can be customized to research hospitals, the paper is especially of interest for complex healthcare organizations that are implementing management accounting practices. The paper contributes to the body of literature on the application of the balanced scorecard in healthcare through an examination of the challenges in designing and implementing this multidimensional performance tool. This is one of the first papers that show how the balanced scorecard model can be adapted to fit the specific requirements of public research hospitals.

Custom molded thermal MRg-FUS phantom

NASA Astrophysics Data System (ADS)

Eames, Matthew D. C.; Snell, John W.; Hananel, Arik; Kassell, Neal F.

2012-11-01

This article describes a method for creating custom-molded thermal phantoms for use with MR-guided focused ultrasound systems. The method is defined here for intracranial applications, though it may be modified for other anatomical targets.

Alternative Fuels Data Center

Science.gov Websites

commercial and residential customers toward the purchase of Level 2 EVSE. Commercial customers who purchase electric rate. Applications must be submitted no later than four months from the date of purchase. Rebates

I want products my own way, but which way? The effects of different product categories and cues on customer responses to Web-based customizations.

PubMed

Chang, Chia-Chi; Chen, Hui-Yun

2009-02-01

Mass customization is a strategy that has been adopted by companies to tailor their products in order to match customer needs more precisely. Therefore, to fully capture the value of mass customization, it is crucial to explore how customers react to mass customization. In previous studies, an implied premise has been that consumers are keen to embrace customized products, and this assumption has also been treated by firms as a prerequisite for successful mass customization strategies. However, an undesirable complexity may result from difficult configuration processes that may intimidate and confuse some customers. Hence, this study explores strategies that marketers can employ to facilitate the customization process. Specifically, this study investigates how to enhance customer satisfaction and purchase decision toward customized products by providing cues compatible with the product category. It is hypothesized that for search products, customers rely more on intrinsic cues when making configuration decisions. On the other hand, for experience products, customers perceive extrinsic cues to be more valuable in assisting them to make configuration decisions. The results suggest that consumers tend to respond more favorably toward customized search products when intrinsic cues are provided than when extrinsic or irrelevant ones are provided. In contrast, when customizing experience products, customers tend to depend more on extrinsic cues than on intrinsic or irrelevant ones.

Tolerance design of patient-specific range QA using the DMAIC framework in proton therapy.

PubMed

Rah, Jeong-Eun; Shin, Dongho; Manger, Ryan P; Kim, Tae Hyun; Oh, Do Hoon; Kim, Dae Yong; Kim, Gwe-Ya

2018-02-01

To implement the DMAIC (Define-Measure-Analyze-Improve-Control) can be used for customizing the patient-specific QA by designing site-specific range tolerances. The DMAIC framework (process flow diagram, cause and effect, Pareto chart, control chart, and capability analysis) were utilized to determine the steps that need focus for improving the patient-specific QA. The patient-specific range QA plans were selected according to seven treatment site groups, a total of 1437 cases. The process capability index, C pm was used to guide the tolerance design of patient site-specific range. For prostate field, our results suggested that the patient range measurements were capable at the current tolerance level of ±1 mm in clinical proton plans. For other site-specific ranges, we analyzed that the tolerance tends to be overdesigned to insufficient process capability calculated by the patient-specific QA data. The customized tolerances were calculated for treatment sites. Control charts were constructed to simulate the patient QA time before and after the new tolerances were implemented. It is found that the total simulation QA time was decreased on average of approximately 20% after establishing new site-specific range tolerances. We simulated the financial impact of this project. The QA failure for whole process in proton therapy would lead up to approximately 30% increase in total cost. DMAIC framework can be used to provide an effective QA by setting customized tolerances. When tolerance design is customized, the quality is reasonably balanced with time and cost demands. © 2017 American Association of Physicists in Medicine.

Semantic Enhancement for Enterprise Data Management

NASA Astrophysics Data System (ADS)

Ma, Li; Sun, Xingzhi; Cao, Feng; Wang, Chen; Wang, Xiaoyuan; Kanellos, Nick; Wolfson, Dan; Pan, Yue

Taking customer data as an example, the paper presents an approach to enhance the management of enterprise data by using Semantic Web technologies. Customer data is the most important kind of core business entity a company uses repeatedly across many business processes and systems, and customer data management (CDM) is becoming critical for enterprises because it keeps a single, complete and accurate record of customers across the enterprise. Existing CDM systems focus on integrating customer data from all customer-facing channels and front and back office systems through multiple interfaces, as well as publishing customer data to different applications. To make the effective use of the CDM system, this paper investigates semantic query and analysis over the integrated and centralized customer data, enabling automatic classification and relationship discovery. We have implemented these features over IBM Websphere Customer Center, and shown the prototype to our clients. We believe that our study and experiences are valuable for both Semantic Web community and data management community.

Program evaluation in integrated resource planning

DOE Office of Scientific and Technical Information (OSTI.GOV)

Council, C.D.

1994-12-31

The Western Area Power Administration along with the Southwestern and Southeastern Power Administrations joined together to develop a set of integrated resource planning (IRP) tools to help their customers development and implement an IRP process. The project has been entitled the Resource Planning Guide (RPG), and is specifically designed to help small- to mid-sized utilities analyze supply- and demand-side alternatives as part of an IRP process. The RPG project will be available in January 1994 and will include such support as: workshops, technical assistance, an RPG hotline, and an RPG User`s Group for the project. The RPG grew out ofmore » the interest shown by utility customers who wanted a user-friendly tool to aid in their application of the IRP process. The project has been field tested by 43 utilities and related organizations over the last year, has sparked interest both nationally and internationally, and is now available for public use. The program evaluation aspects of the IRP process are heightened by a requirement of the Energy Policy Act of 1992 which requires all long-term power customers of the Western Area Power Administration to develop, implement, and monitor an IRP process. The EPAct defines IRP as: A planning process for new energy resources that evaluates the full range of alternatives, including new generating capacity, power purchases, energy conservation and efficiency, cogeneration and district heating and cooling applications, and renewable energy resources, to provide adequate and reliable service to its electric customers at the lowest system cost. The process takes into account necessary features for system operation, such as diversity, reliability, dispatchability, and other factors of risk; the ability to verify energy savings achieved through energy conservation and efficiency and the projected durability of such savings measured over time; and treats demand and supply resources on a consistent and integrated basis.« less

Performance Assessment of a Custom, Portable, and Low-Cost Brain-Computer Interface Platform.

PubMed

McCrimmon, Colin M; Fu, Jonathan Lee; Wang, Ming; Lopes, Lucas Silva; Wang, Po T; Karimi-Bidhendi, Alireza; Liu, Charles Y; Heydari, Payam; Nenadic, Zoran; Do, An Hong

2017-10-01

Conventional brain-computer interfaces (BCIs) are often expensive, complex to operate, and lack portability, which confines their use to laboratory settings. Portable, inexpensive BCIs can mitigate these problems, but it remains unclear whether their low-cost design compromises their performance. Therefore, we developed a portable, low-cost BCI and compared its performance to that of a conventional BCI. The BCI was assembled by integrating a custom electroencephalogram (EEG) amplifier with an open-source microcontroller and a touchscreen. The function of the amplifier was first validated against a commercial bioamplifier, followed by a head-to-head comparison between the custom BCI (using four EEG channels) and a conventional 32-channel BCI. Specifically, five able-bodied subjects were cued to alternate between hand opening/closing and remaining motionless while the BCI decoded their movement state in real time and provided visual feedback through a light emitting diode. Subjects repeated the above task for a total of 10 trials, and were unaware of which system was being used. The performance in each trial was defined as the temporal correlation between the cues and the decoded states. The EEG data simultaneously acquired with the custom and commercial amplifiers were visually similar and highly correlated ( ρ = 0.79). The decoding performances of the custom and conventional BCIs averaged across trials and subjects were 0.70 ± 0.12 and 0.68 ± 0.10, respectively, and were not significantly different. The performance of our portable, low-cost BCI is comparable to that of the conventional BCIs. Platforms, such as the one developed here, are suitable for BCI applications outside of a laboratory.

Custom auroral electrojet indices calculated by using MANGO value-added services

NASA Astrophysics Data System (ADS)

Bargatze, L. F.; Moore, W. B.; King, T. A.

2009-12-01

A set of computational routines called MANGO, Magnetogram Analysis for the Network of Geophysical Observatories, is utilized to calculate customized versions of the auroral electrojet indices, AE, AL, and AU. MANGO is part of an effort to enhance data services available to users of the Heliophysics VxOs, specifically for the Virtual Magnetospheric Observatory (VMO). The MANGO value-added service package is composed of a set of IDL routines that decompose ground magnetic field observations to isolate secular, diurnal, and disturbance variations of magnetic field disturbance, station-by-station. Each MANGO subroutine has been written in modular fashion to allow "plug and play"-style flexibility and each has been designed to account for failure modes and noisy data so that the programs will run to completion producing as much derived data as possible. The capabilities of the MANGO service package will be demonstrated through their application to the study of auroral electrojet current flow during magnetic substorms. Traditionally, the AE indices are calculated by using data from about twelve ground stations located at northern auroral zone latitudes spread longitudinally around the world. Magnetogram data are corrected for secular variation prior to calculating the standard version of the indices but the data are not corrected for diurnal variations. A custom version of the AE indices will be created by using the MANGO routines including a step to subtract diurnal curves from the magnetic field data at each station. The custom AE indices provide more accurate measures of auroral electrojet activity due to isolation of the sunstorm electrojet magnetic field signiture. The improvements in the accuracy of the custom AE indices over the tradition indices are largest during the northern hemisphere summer when the range of diurnal variation reaches its maximum.

Links among high-performance work environment, service quality, and customer satisfaction: an extension to the healthcare sector.

PubMed

Scotti, Dennis J; Harmon, Joel; Behson, Scott J

2007-01-01

Healthcare managers must deliver high-quality patient services that generate highly satisfied and loyal customers. In this article, we examine how a high-involvement approach to the work environment of healthcare employees may lead to exceptional service quality, satisfied patients, and ultimately to loyal customers. Specifically, we investigate the chain of events through which high-performance work systems (HPWS) and customer orientation influence employee and customer perceptions of service quality and patient satisfaction in a national sample of 113 Veterans Health Administration ambulatory care centers. We present a conceptual model for linking work environment to customer satisfaction and test this model using structural equations modeling. The results suggest that (1) HPWS is linked to employee perceptions of their ability to deliver high-quality customer service, both directly and through their perceptions of customer orientation; (2) employee perceptions of customer service are linked to customer perceptions of high-quality service; and (3) perceived service quality is linked with customer satisfaction. Theoretical and practical implications of our findings, including suggestions of how healthcare managers can implement changes to their work environments, are discussed.

Using the "customer service framework" to successfully implement patient- and family-centered care.

PubMed

Rangachari, Pavani; Bhat, Anita; Seol, Yoon-Ho

2011-01-01

Despite the growing momentum toward patient- and family-centered care at the federal policy level, the organizational literature remains divided on its effectiveness, especially in regard to its key dimension of involving patients and families in treatment decisions and safety practices. Although some have argued for the universal adoption of patient involvement, others have questioned both the effectiveness and feasibility of patient involvement. In this article, we apply a well-established theoretical perspective, that is, the Service Quality Model (SQM) (also known as the "customer service framework") to the health care context, to reconcile the debate related to patient involvement. The application helps support the case for universal adoption of patient involvement and also question the arguments against it. A key contribution of the SQM lies in highlighting a set of fundamental service quality determinants emanating from basic consumer service needs. It also provides a simple framework for understanding how gaps between consumer expectations and management perceptions of those expectations can affect the gap between "expected" and "perceived" service quality from a consumer's perspective. Simultaneously, the SQM also outlines "management requirements" for the successful implementation of a customer service strategy. Applying the SQM to the health care context therefore, in addition to reconciling the debate on patient involvement, helps identify specific steps health care managers could take to successfully implement patient- and family-centered care. Correspondingly, the application also provides insights into strategies for the successful implementation of policy recommendations related to patient- and family-centered care in health care organizations.

How We Make DNA Origami.

PubMed

Wagenbauer, Klaus F; Engelhardt, Floris A S; Stahl, Evi; Hechtl, Vera K; Stömmer, Pierre; Seebacher, Fabian; Meregalli, Letizia; Ketterer, Philip; Gerling, Thomas; Dietz, Hendrik

2017-10-05

DNA origami has attracted substantial attention since its invention ten years ago, due to the seemingly infinite possibilities that it affords for creating customized nanoscale objects. Although the basic concept of DNA origami is easy to understand, using custom DNA origami in practical applications requires detailed know-how for designing and producing the particles with sufficient quality and for preparing them at appropriate concentrations with the necessary degree of purity in custom environments. Such know-how is not readily available for newcomers to the field, thus slowing down the rate at which new applications outside the field of DNA nanotechnology may emerge. To foster faster progress, we share in this article the experience in making and preparing DNA origami that we have accumulated over recent years. We discuss design solutions for creating advanced structural motifs including corners and various types of hinges that expand the design space for the more rigid multilayer DNA origami and provide guidelines for preventing undesired aggregation and on how to induce specific oligomerization of multiple DNA origami building blocks. In addition, we provide detailed protocols and discuss the expected results for five key methods that allow efficient and damage-free preparation of DNA origami. These methods are agarose-gel purification, filtration through molecular cut-off membranes, PEG precipitation, size-exclusion chromatography, and ultracentrifugation-based sedimentation. The guide for creating advanced design motifs and the detailed protocols with their experimental characterization that we describe here should lower the barrier for researchers to accomplish the full DNA origami production workflow. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Customer and service profitability

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ballaban, M.; Kelly, K.; Wisniewski, L.

1996-03-01

The rapid pace of competitive change in the generation sector has pushed electric utilities to rethink the concept of being obligated to serve all customers and with this change, the notion of measuring customer profitability is also being redefined. Traditionally, uniform services were provided to all customers. Rates were based on each customer classes` contribution to average costs, and consequently return was equally allocated across all customer segments. Profitability was defined strictly on an aggregate basis. The increasing demand for choice by electric customers will require electricity providers to redefine if not who they serve, than certainly how they providemore » differentiated services tailored to specific customer segments. Utilities are beginning to analyze the value, or profitability, of offering these services. Aggregate data no longer provides an accurate assessment of how resources should be allocated most efficiently. As services are unbundled, so too must costs be disaggregated to effectively measure the profitability of various options.« less

Recommendation Method for Build-to-Order Products Considering Substitutability of Specifications and Stock Consumption Balance of Components

NASA Astrophysics Data System (ADS)

Shimoda, Atsushi; Kosugi, Hidenori; Karino, Takafumi; Komoda, Norihisa

This study focuses on a stock reduction method for build-to-order (BTO) products to flow surplus parts out to the market using sale by recommendation. A sale by recommendation is repeated in an each business negotiation using a recommended configuration selected from the inventory of parts to minimize the stock deficiency or excess at the end of a certain period of the production plan. The method is based on the potential of a customer specification to be replaced by an alternative one if the alternative one is close to the initial customer specification. A recommendation method is proposed that decides the recommended product configuration by balancing the part consumption so that the alternative specification of the configuration is close enough to the initial customer specification for substitutability. The method was evaluated by a simulation using real BTO manufacturing data and the result demonstrates that the unbalance of the consumption of parts inventory is improved.

Hostile and benevolent reactions toward pregnant women: complementary interpersonal punishments and rewards that maintain traditional roles.

PubMed

Hebl, Michelle R; King, Eden B; Glick, Peter; Singletary, Sarah L; Kazama, Stephanie

2007-11-01

A naturalistic field study investigated behavior toward pregnant (vs. nonpregnant) women in nontraditional (job applicant) and traditional (store customer) roles. Female confederates, who sometimes wore a pregnancy prosthesis, posed as job applicants or customers at retail stores. Store employees exhibited more hostile behavior (e.g., rudeness) toward pregnant (vs. nonpregnant) applicants and more benevolent behavior (e.g., touching, overfriendliness) toward pregnant (vs. nonpregnant) customers. A second experiment revealed that pregnant women are especially likely to encounter hostility (from both men and women) when applying for masculine as compared with feminine jobs. The combination of benevolence toward pregnant women in traditional roles and hostility toward those who seek nontraditional roles suggests a system of complementary interpersonal rewards and punishments that may discourage pregnant women from pursuing work that violates gender norms. (c) 2007 APA

76 FR 163 - Agency Information Collection Activities: CBP Regulations Pertaining to Customs Brokers

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-03

... broker exam would complete CBP Form 3124E, ``Application for Customs Broker License Exam''; or to apply... U.S.C. 1641. CBP Forms 3124 and 3124E may be found at http://www.cbp.gov/xp/cgov/toolbox/forms/ . Further information about the customs broker exam and how to apply for it may be found at http://www.cbp...

Application of computer graphics in the design of custom orthopedic implants.

PubMed

Bechtold, J E

1986-10-01

Implementation of newly developed computer modelling techniques and computer graphics displays and software have greatly aided the orthopedic design engineer and physician in creating a custom implant with good anatomic conformity in a short turnaround time. Further advances in computerized design and manufacturing will continue to simplify the development of custom prostheses and enlarge their niche in the joint replacement market.

Customized role play: strategy for development of psychiatric mental health nurse practitioner competencies.

PubMed

Hubbard, Grace B

2014-04-01

To discuss the teaching/learning strategy of customized role play to enhance psychiatric mental health nurse practitioner (PMHNP) students' entry level competency. Customized role play facilitates application of new content, understanding of the patient's experience, and assessment of skill deficits. New PMHNP graduates have entry level proficiency across the life span with a range of psychotherapeutic interventions. © 2013 Wiley Periodicals, Inc.

Building automatic customer complaints filtering application based on Twitter in Bahasa Indonesia

NASA Astrophysics Data System (ADS)

Gunawan, D.; Siregar, R. P.; Rahmat, R. F.; Amalia, A.

2018-03-01

Twitter has become a media to provide communication between a company with its customers. The average number of Twitter active users monthly is 330 million. A lot of companies realize the potential of Twitter to establish good relationship with their customers. Therefore, they usually have one official Twitter account to act as customer care division. In Indonesia, one of the company that utilizes the potential of Twitter to reach their customers is PT Telkom. PT Telkom has an official customer service account (called @TelkomCare) to receive customers’ problem. However, because of this account is open for public, Twitter users might post all kind of messages (not only complaints) to Telkom Care account. This leads to a problem that the Telkom Care account contains not only the customer complaints but also compliment and ordinary message. Furthermore, the complaints should be distributed to relevant division such as “Indihome”, “Telkomsel”, “UseeTV”, and “Telepon” based on the content of the message. This research built the application that automatically filter twitter post messages into several pre-defined categories (based on existing divisions) using Naïve Bayes algorithm. This research is done by collecting Twitter message, data cleaning, data pre-processing, training and testing data, and evaluate the classification result. This research yields 97% accuracy to classify Twitter message into the categories mentioned earlier.

Designing of a Digital Behind-the-Ear Hearing Aid to Meet the World Health Organization Requirements

PubMed Central

Bento, Ricardo Ferreira; Penteado, Silvio Pires

2010-01-01

Hearing loss is a common health issue that affects nearly 10% of the world population as indicated by many international studies. The hearing impaired typically experience more frustration, anxiety, irritability, depression, and disorientation than those with normal hearing levels. The standard rehabilitation tool for hearing impairment is an electronic hearing aid whose main components are transducers (microphone and receiver) and a digital signal processor. These electronic components are manufactured by supply chain rather than by hearing aid manufacturers. Manufacturers can use custom-designed components or generic off-the-shelf components. These electronic components are available as application-specific or off-the-shelf products, with the former designed for a specific manufacturer and the latter for a generic approach. The choice of custom or generic components will affect the product specifications, pricing, manufacturing, life cycle, and marketing strategies of the product. The World Health Organization is interested in making available to developing countries hearing aids that are inexpensive to purchase and maintain. The hearing aid presented in this article was developed with these specifications in mind together with additional contemporary features such as four channels with wide dynamic range compression, an adjustable compression rate for each channel, four comfort programs, an adaptive feedback manager, and full volume control. This digital hearing aid is fitted using a personal computer with minimal hardware requirements in intuitive three-step fitting software. A trimmer-adjusted version can be developed where human and material resources are scarce. PMID:20724354

Designing of a digital behind-the-ear hearing aid to meet the World Health Organization requirements.

PubMed

Bento, Ricardo Ferreira; Penteado, Silvio Pires

2010-06-01

Hearing loss is a common health issue that affects nearly 10% of the world population as indicated by many international studies. The hearing impaired typically experience more frustration, anxiety, irritability, depression, and disorientation than those with normal hearing levels. The standard rehabilitation tool for hearing impairment is an electronic hearing aid whose main components are transducers (microphone and receiver) and a digital signal processor. These electronic components are manufactured by supply chain rather than by hearing aid manufacturers. Manufacturers can use custom-designed components or generic off-the-shelf components. These electronic components are available as application-specific or off-the-shelf products, with the former designed for a specific manufacturer and the latter for a generic approach. The choice of custom or generic components will affect the product specifications, pricing, manufacturing, life cycle, and marketing strategies of the product. The World Health Organization is interested in making available to developing countries hearing aids that are inexpensive to purchase and maintain. The hearing aid presented in this article was developed with these specifications in mind together with additional contemporary features such as four channels with wide dynamic range compression, an adjustable compression rate for each channel, four comfort programs, an adaptive feedback manager, and full volume control. This digital hearing aid is fitted using a personal computer with minimal hardware requirements in intuitive three-step fitting software. A trimmer-adjusted version can be developed where human and material resources are scarce.

Medication order communication using fax and document-imaging technologies.

PubMed

Simonian, Armen I

2008-03-15

The implementation of fax and document-imaging technology to electronically communicate medication orders from nursing stations to the pharmacy is described. The evaluation of a commercially available pharmacy order imaging system to improve order communication and to make document retrieval more efficient led to the selection and customization of a system already licensed and used in seven affiliated hospitals. The system consisted of existing fax machines and document-imaging software that would capture images of written orders and send them from nursing stations to a central database server. Pharmacists would then retrieve the images and enter the orders in an electronic medical record system. The pharmacy representatives from all seven hospitals agreed on the configuration and functionality of the custom application. A 30-day trial of the order imaging system was successfully conducted at one of the larger institutions. The new system was then implemented at the remaining six hospitals over a period of 60 days. The transition from a paper-order system to electronic communication via a standardized pharmacy document management application tailored to the specific needs of this health system was accomplished. A health system with seven affiliated hospitals successfully implemented electronic communication and the management of inpatient paper-chart orders by using faxes and document-imaging technology. This standardized application eliminated the problems associated with the hand delivery of paper orders, the use of the pneumatic tube system, and the printing of traditional faxes.

CIDR

Science.gov Websites

Initiation Application Schedule Service Information and Pricing Services Sample Requirements Pricing SNP Genotyping General Information Genome Wide Association Custom FFPE Sample Options Methylation Linkage Consortium Developed Mouse Whole Genome Sequencing General Information Whole Genome Whole Exome Custom

Customer systems group 1996 target summaries: Information systems and telecommunications. Revision 4

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1995-06-15

The target summaries give planning information on the new business systems development; customer service applications and infrastructure; and advanced information systems and telecommunications research, architecture and standards factions of Information Systems & Telecommunications.

Customer relationship management implementation in the small and medium enterprise

NASA Astrophysics Data System (ADS)

Nugroho, Agus; Suharmanto, Agus; Masugino

2018-03-01

To win the global competition and sustain the business, small and medium enterprise shall implement a reliable information technology application to support their customer data base, production and sales as well as marketing management. This paper addresses the implementation of Customer Relationship Management (CRM) in small and medium enterprise, CV. Densuko Jaya. It is a small and medium enterprises in Semarang, Central Java, Republic of Indonesia deal with rubber processing industry supply chain. ADDIE model utilized in study to setup the CRM functionality at these enterprises. The aim of the authors is to present the benefits resulting from the application of CRM technologies at these enterprises to solve their chronicle issues in the field of integrated customer data base, production management process and sales automation in order to boost their business in the near future. Training and coaching have been delivered to the enterprises staffs and management to ensure that they can execute the system.

Customer satisfaction with patient care: "Where's the Beef?".

PubMed

Vukmir, Rade B

2006-01-01

This was an attempt to present an analysis of the literature examining objective information concerning the subject of customer service, as it applies to the current medical practice. Hopefully this information will be synthesized to generate a cogent approach to correlate customer service with quality. Articles were obtained by an English language search of MEDLINE from January 1976 to July 2005. This computerized search was supplemented with literature from the author's personal collection of peer reviewed articles on customer service in a medical setting. This information was presented in a qualitative fashion. There is a significant lack of objective data correlating customer service objectives, patient satisfaction, and quality of care. Patients present predominantly for the convenience of emergency department care. Specifics of satisfaction are directed to the timing, and amount of "caring." Demographic correlates including symptom presentation, practice style, location, and physician issues directly impact on satisfaction. It is most helpful to develop a productive plan for the "difficult patient" emphasizing communication and empathy. The current emergency medicine customer service dilemmas are a complex interaction of both patient and physician factors specifically targeting both efficiency and patient satisfaction. Awareness of these issues can help to maximize efficiency, minimize subsequent medicolegal risk and improve patient care.

Service quality in community pharmacy: an exploration of determinants.

PubMed

White, Lesley; Klinner, Christiane

2012-01-01

Although various instruments have been developed to measure customer satisfaction with community pharmacy services, there is limited research regarding pharmacy staffs' understanding of service quality and its determinants. This study aimed to explore the perceptions of pharmacy staff regarding the factors that constitute a high level of service quality using the service quality determinants proposed by the Conceptual Model of Service Quality. Structured interviews were conducted with 27 pharmacy assistants and 6 pharmacists in 3 community pharmacies in Sydney. The interview questions focused on the participants' perceptions of consumer expectations, the translation of these perceptions into service quality specifications, the actual service delivery, and the communication to customers. From the pharmacy staff perspective, service quality is significantly limited by insufficient internal communication and control processes that impede role clarity and the resolution of conflicting role expectations among customer service personnel. Participants indicated that these problems could be alleviated through the implementation of more transparent, realistic, measurable, and accepted quality specifications by pharmacy management. The study indicates that the extent to which pharmacy management sets, maintains, and communicates service quality specifications to staff directly affects role clarity, role conflict, and organizational commitment among customer service staff, which in turn directly influence the level of service quality provided to the customers. Copyright © 2012 Elsevier Inc. All rights reserved.

Coordinated scheduling for dynamic real-time systems

NASA Technical Reports Server (NTRS)

Natarajan, Swaminathan; Zhao, Wei

1994-01-01

In this project, we addressed issues in coordinated scheduling for dynamic real-time systems. In particular, we concentrated on design and implementation of a new distributed real-time system called R-Shell. The design objective of R-Shell is to provide computing support for space programs that have large, complex, fault-tolerant distributed real-time applications. In R-shell, the approach is based on the concept of scheduling agents, which reside in the application run-time environment, and are customized to provide just those resource management functions which are needed by the specific application. With this approach, we avoid the need for a sophisticated OS which provides a variety of generalized functionality, while still not burdening application programmers with heavy responsibility for resource management. In this report, we discuss the R-Shell approach, summarize the achievement of the project, and describe a preliminary prototype of R-Shell system.

Integrating Stakeholders and Users into the Geography Discipline's Research Process

USGS Publications Warehouse

Hermans, Caroline M.; Taketa, Richard

2006-01-01

Future research priorities of Geography emphasize the discipline's leadership role in the U.S. Geological Survey (USGS) in multidisciplinary and integrated research on human and environmental systems and how these systems are interrelated and respond to change Geography's research priorities also emphasize providing science that is usable to society and creating decision support products applicable to given customer problems. To achieve these goals, we must understand the relationship between our research and our customer, and how to integrate the customer into the research process. This report details the elements of the research process that help achieve the degree of stakeholder involvement necessary to ensure a successful end-product. It offers suggestions that can help researchers better understand stakeholders and customers and involve them in the research process more effectively, while preserving the integrity of the science. Its aim is to help researchers understand the problems and challenges faced by our customers and communicate the ways in which Geography can help address their problems. Adopting these guidelines can improve the efficiency of the research process and lead to higher quality output. We will be able to conduct better research because we will have an improved understanding of the research problem and the stakeholders involved. This report covers a broad range of topics, from identifying and communicating with stakeholders and users, to the use of language, to how to effectively present scientific information to the user. It does not offer a 'one size fits all' method. Instead, perhaps only specific sections are suitable for a given project and customers, depending on project scope and needs. This report is based on the objectives of Geography's strategic plan, U. S. Geological Survey's strategic plan, and Department of Interior's strategic plan. Section 2 of these guidelines describes the purpose of the research process in Geography and the need for better user involvement in the process. Section 3 explains how to conduct a stakeholder analysis. Section 4 explains how to conduct a user-needs assessment.

TEP Power Partners Project [Tucson Electric Power

DOE Office of Scientific and Technical Information (OSTI.GOV)

None, None

2014-02-06

The Arizona Governor’s Office of Energy Policy, in partnership with Tucson Electric Power (TEP), Tendril, and Next Phase Energy (NPE), formed the TEP Power Partners pilot project to demonstrate how residential customers could access their energy usage data and third party applications using data obtained from an Automatic Meter Reading (AMR) network. The project applied for and was awarded a Smart Grid Data Access grant through the U.S. Department of Energy. The project participants’ goal for Phase I is to actively engage 1,700 residential customers to demonstrate sustained participation, reduction in energy usage (kWh) and cost ($), and measure relatedmore » aspects of customer satisfaction. This Demonstration report presents a summary of the findings, effectiveness, and customer satisfaction with the 15-month TEP Power Partners pilot project. The objective of the program is to provide residential customers with energy consumption data from AMR metering and empower these participants to better manage their electricity use. The pilot recruitment goals included migrating 700 existing customers from the completed Power Partners Demand Response Load Control Project (DRLC), and enrolling 1,000 new participants. Upon conclusion of the project on November 19, 2013; 1,390 Home Area Networks (HANs) were registered; 797 new participants installed a HAN; Survey respondents’ are satisfied with the program and found value with a variety of specific program components; Survey respondents report feeling greater control over their energy usage and report taking energy savings actions in their homes after participating in the program; On average, 43 % of the participants returned to the web portal monthly and 15% returned weekly; and An impact evaluation was completed by Opinion Dynamics and found average participant savings for the treatment period1 to be 2.3% of their household use during this period.2 In total, the program saved 163 MWh in the treatment period of 2013.« less

Fall proof: improving mobility and balance Elizabeth Best-Martini Fall proof: improving mobility and balance and Kim A Botenhagen-Di Genova Human Kinetics £24.50 0 73603 687 3 0736036873 Debra Rose Human Kinetics £38 0 73604 088 9 0736040889.

PubMed

2003-09-01

A structured balance and mobility-training programme specifically designed to reduce physical frailty and the rising incidence of falls among older people. This practical manual blends theory into practical applications and covers an introduction to the body systems, balance assessments and a discussion of contemporary motor learning principles. Tel: Customer Services 0113 255 5665. Email: hk@hkeurope.com.

MOEMs, key optical components for future astronomical instrumentation in space

NASA Astrophysics Data System (ADS)

Zamkotsian, Frédéric; Dohlen, Kjetil; Burgarella, Denis; Ferrari, Marc; Buat, Veronique

2017-11-01

Based on the micro-electronics fabrication process, MicroOpto-Electro-Mechanical Systems (MOEMS) are under study, in order to be integrated in next-generation astronomical instruments and telescopes, especially for space missions. The main advantages of micro-optical components are their compactness, scalability, specific task customization using elementary building blocks, and they allows remote control. As these systems are easily replicable, the price of the components is decreasing dramatically when their number is increasing. The two major applications of MOEMS are Multi-Object Spectroscopy masks and Deformable Mirror systems.

Low power signal processing electronics for wearable medical devices.

PubMed

Casson, Alexander J; Rodriguez-Villegas, Esther

2010-01-01

Custom designed microchips, known as Application Specific Integrated Circuits (ASICs), offer the lowest possible power consumption electronics. However, this comes at the cost of a longer, more complex and more costly design process compared to one using generic, off-the-shelf components. Nevertheless, their use is essential in future truly wearable medical devices that must operate for long periods of time from physically small, energy limited batteries. This presentation will demonstrate the state-of-the-art in ASIC technology for providing online signal processing for use in these wearable medical devices.

ECL gate array with integrated PLL-based clock recovery and synthesis for high-speed data and telecom applications

NASA Astrophysics Data System (ADS)

Rosky, David S.; Coy, Bruce H.; Friedmann, Marc D.

1992-03-01

A 2500 gate mixed signal gate array has been developed that integrates custom PLL-based clock recovery and clock synthesis functions with 2500 gates of configurable logic cells to provide a single chip solution for 200 - 1244 MHz fiber based digital interface applications. By customizing the digital logic cells, any of the popular telecom and datacom standards may be implemented.

Network Science Research Laboratory (NSRL) Telemetry Warehouse

DTIC Science & Technology

2016-06-01

Functionality and architecture of the NSRL Telemetry Warehouse are also described as well as the web interface, data structure, security aspects, and...Experiment Controller 6 4.5 Telemetry Sensors 7 4.6 Custom Data Processing Nodes 7 5. Web Interface 8 6. Data Structure 8 6.1 Measurements 8...telemetry in comma-separated value (CSV) format from the web interface or via custom applications developed by researchers using the client application

A Fully Customized Baseline Removal Framework for Spectroscopic Applications.

PubMed

Giguere, Stephen; Boucher, Thomas; Carey, C J; Mahadevan, Sridhar; Dyar, M Darby

2017-07-01

The task of proper baseline or continuum removal is common to nearly all types of spectroscopy. Its goal is to remove any portion of a signal that is irrelevant to features of interest while preserving any predictive information. Despite the importance of baseline removal, median or guessed default parameters are commonly employed, often using commercially available software supplied with instruments. Several published baseline removal algorithms have been shown to be useful for particular spectroscopic applications but their generalizability is ambiguous. The new Custom Baseline Removal (Custom BLR) method presented here generalizes the problem of baseline removal by combining operations from previously proposed methods to synthesize new correction algorithms. It creates novel methods for each technique, application, and training set, discovering new algorithms that maximize the predictive accuracy of the resulting spectroscopic models. In most cases, these learned methods either match or improve on the performance of the best alternative. Examples of these advantages are shown for three different scenarios: quantification of components in near-infrared spectra of corn and laser-induced breakdown spectroscopy data of rocks, and classification/matching of minerals using Raman spectroscopy. Software to implement this optimization is available from the authors. By removing subjectivity from this commonly encountered task, Custom BLR is a significant step toward completely automatic and general baseline removal in spectroscopic and other applications.

The Role of CFD Simulation in Rocket Propulsion Support Activities

NASA Technical Reports Server (NTRS)

West, Jeff

2011-01-01

Outline of the presentation: CFD at NASA/MSFC (1) Flight Projects are the Customer -- No Science Experiments (2) Customer Support (3) Guiding Philosophy and Resource Allocation (4) Where is CFD at NASA/MSFC? Examples of the expanding Role of CFD at NASA/MSFC (1) Liquid Rocket Engine Applications : Evolution from Symmetric and Steady to 3D Unsteady (2)Launch Pad Debris Transport-> Launch Pad Induced Environments (a) STS and Launch Pad Geometry-steady (b) Moving Body Shuttle Launch Simulations (c) IOP and Acoustics Simulations (3)General Purpose CFD Applications (4) Turbomachinery Applications

Custom large scale integrated circuits for spaceborne SAR processors

NASA Technical Reports Server (NTRS)

Tyree, V. C.

1978-01-01

The application of modern LSI technology to the development of a time-domain azimuth correlator for SAR processing is discussed. General design requirements for azimuth correlators for missions such as SEASAT-A, Venus orbital imaging radar (VOIR), and shuttle imaging radar (SIR) are summarized. Several azimuth correlator architectures that are suitable for implementation using custom LSI devices are described. Technical factors pertaining to selection of appropriate LSI technologies are discussed, and the maturity of alternative technologies for spacecraft applications are reported in the context of expected space mission launch dates. The preliminary design of a custom LSI time-domain azimuth correlator device (ACD) being developed for use in future SAR processors is detailed.

Closed-Loop Optogenetic Intervention in Mice

PubMed Central

Oijala, Mikko; Soltesz, Ivan

2014-01-01

Optogenetic interventions offer novel ways of probing, in a temporally specific manner, the roles of specific cell types in neuronal network functions of awake, behaving animals. Despite the unique potential for temporally specific optogenetic interventions in disease states, a major hurdle in its broad application to unpredictable brain states in a laboratory setting is constructing a real-time responsive system. We recently created a closed-loop system for stopping spontaneous seizures in chronically epileptic mice using optogenetic intervention. This system performs with very high sensitivity and specificity, and the strategy is relevant not only to epilepsy, but can also be used to react in real time, with optogenetic or other interventions, to diverse brain states. The protocol presented here is highly modular and requires variable time to perform. We describe the basic construction of a complete system, and include our downloadable custom closed-loop detection software which can be employed for this purpose. PMID:23845961

12 CFR 368.100 - Obligations concerning institutional customers.

Code of Federal Regulations, 2014 CFR

2014-01-01

... customers.” In the Matter of the Application of F.J. Kaufman and Company of Virginia and Frederick J. Kaufman, Jr., 50 SEC 164 (1989). (e) While it is difficult to define in advance the scope of a bank's...

12 CFR 368.100 - Obligations concerning institutional customers.

Code of Federal Regulations, 2012 CFR

2012-01-01

... customers.” In the Matter of the Application of F.J. Kaufman and Company of Virginia and Frederick J. Kaufman, Jr., 50 SEC 164 (1989). (e) While it is difficult to define in advance the scope of a bank's...

12 CFR 13.100 - Obligations concerning institutional customers.

Code of Federal Regulations, 2013 CFR

2013-01-01

... recommendation could be suitable for at least some customers.” In the Matter of the Application of F.J. Kaufman and Company of Virginia and Frederick J. Kaufman, Jr., 50 SEC 164 (1989). (e) While it is difficult to...

12 CFR 208.111 - Obligations concerning institutional customers.

Code of Federal Regulations, 2013 CFR

2013-01-01

... recommendation could be suitable for at least some customers.” In the Matter of the Application of F.J. Kaufman and Company of Virginia and Frederick J. Kaufman, Jr., 50 SEC 164 (1989). (e) While it is difficult to...

12 CFR 13.100 - Obligations concerning institutional customers.

Code of Federal Regulations, 2014 CFR

2014-01-01

... recommendation could be suitable for at least some customers.” In the Matter of the Application of F.J. Kaufman and Company of Virginia and Frederick J. Kaufman, Jr., 50 SEC 164 (1989). (e) While it is difficult to...

Feasibility study of using statistical process control to customized quality assurance in proton therapy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rah, Jeong-Eun; Oh, Do Hoon; Shin, Dongho

Purpose: To evaluate and improve the reliability of proton quality assurance (QA) processes and, to provide an optimal customized tolerance level using the statistical process control (SPC) methodology. Methods: The authors investigated the consistency check of dose per monitor unit (D/MU) and range in proton beams to see whether it was within the tolerance level of the daily QA process. This study analyzed the difference between the measured and calculated ranges along the central axis to improve the patient-specific QA process in proton beams by using process capability indices. Results: The authors established a customized tolerance level of ±2% formore » D/MU and ±0.5 mm for beam range in the daily proton QA process. In the authors’ analysis of the process capability indices, the patient-specific range measurements were capable of a specification limit of ±2% in clinical plans. Conclusions: SPC methodology is a useful tool for customizing the optimal QA tolerance levels and improving the quality of proton machine maintenance, treatment delivery, and ultimately patient safety.« less

A medical digital library to support scenario and user-tailored information retrieval.

PubMed

Chu, W W; Johnson, D B; Kangarloo, H

2000-06-01

Current large-scale information sources are designed to support general queries and lack the ability to support scenario-specific information navigation, gathering, and presentation. As a result, users are often unable to obtain desired specific information within a well-defined subject area. Today's information systems do not provide efficient content navigation, incremental appropriate matching, or content correlation. We are developing the following innovative technologies to remedy these problems: 1) scenario-based proxies, enabling the gathering and filtering of information customized for users within a pre-defined domain; 2) context-sensitive navigation and matching, providing approximate matching and similarity links when an exact match to a user's request is unavailable; 3) content correlation of documents, creating semantic links between documents and information sources; and 4) user models for customizing retrieved information and result presentation. A digital medical library is currently being constructed using these technologies to provide customized information for the user. The technologies are general in nature and can provide custom and scenario-specific information in many other domains (e.g., crisis management).

Kernel User’s Manual Version 1.0

DTIC Science & Technology

1989-02-01

especially on distributed systems. There are issues concerning functionality (amply documented in [ARTEWG 86b), customization , tool support (especially...a far lower level, including special device drivers, special message or signaling systems, and even a custom executive. There is far less general...functionality; the implementors of the language do not know how to satisfy the variety of needs of real-time applications; the vendors are unable to customize

Export Controls: License Screening and Compliance Procedures Need Strengthening.

DTIC Science & Technology

1994-06-01

agreements between Commerce and Customs . While this represents a significant step towards a cooperative relationship , we have not verified that real...license applications, (2) how well these agencies cooperate with each other and the U.S. Customs Service, (3) whether State is monitoring reexports...other than a foreign government). Customs serves as State’s enforcement arm for AECA. In contrast, EAA has no registration or U.S. person

[Application of marketing strategies for the management of public hospitals from the viewpoint of the staff members].

PubMed

Riveros S, Jorge; Berné M, Carmen

2006-03-01

The implementation of the marketing strategies in public hospitals provides management advantages and improves the relationship between customers and staff. To analyze the application of marketing strategies in a public hospital, from the perspective of the staff. A structured survey that asked about perceptions in 50 items about communication between personnel and customers/users, customer satisfaction, participation in the development of new policies and incentives for efficiency was applied to a stratified sample of the staff. Factorial and regression analyses were performed to define the impact of marketing strategies on the degree of preoccupation and orientation of the organization towards the satisfaction of customer needs. The survey was applied to 74 males and 122 females. The survey showed that the orientation of the hospital towards the satisfaction of its beneficiaries basically depends on the generation of an organizational culture oriented towards them and the implementation of adequate policies in staff management and quality of service. These basic aspects can be accompanied with practices associated to the new marketing approaches such as a market orientation, customer orientation and relational marketing. All these factors presented positive and significant relations. New marketing strategies should be applied, to achieve an efficient and customer oriented hospital management.

Instrument Remote Control Application Framework

NASA Technical Reports Server (NTRS)

Ames, Troy; Hostetter, Carl F.

2006-01-01

The Instrument Remote Control (IRC) architecture is a flexible, platform-independent application framework that is well suited for the control and monitoring of remote devices and sensors. IRC enables significant savings in development costs by utilizing extensible Markup Language (XML) descriptions to configure the framework for a specific application. The Instrument Markup Language (IML) is used to describe the commands used by an instrument, the data streams produced, the rules for formatting commands and parsing the data, and the method of communication. Often no custom code is needed to communicate with a new instrument or device. An IRC instance can advertise and publish a description about a device or subscribe to another device's description on a network. This simple capability of dynamically publishing and subscribing to interfaces enables a very flexible, self-adapting architecture for monitoring and control of complex instruments in diverse environments.

78 FR 4926 - Self-Regulatory Organizations; NASDAQ OMX PHLX LLC; Notice of Filing and Immediate Effectiveness...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-23

... on the proposed rule change from interested persons. \\1\\ 15 U.S.C. 78s(b)(1). \\2\\ 17 CFR 240.19b-4. I....'' Specifically, the Exchange proposes to amend the Customer Rebate Program, Select Symbols,\\5\\ Simple and Complex... Category D to the Customer Rebate Program relating to Customer Simple Orders in Select Symbols. The...

Analyzing Tabular and State-Transition Requirements Specifications in PVS

NASA Technical Reports Server (NTRS)

Owre, Sam; Rushby, John; Shankar, Natarajan

1997-01-01

We describe PVS's capabilities for representing tabular specifications of the kind advocated by Parnas and others, and show how PVS's Type Correctness Conditions (TCCs) are used to ensure certain well-formedness properties. We then show how these and other capabilities of PVS can be used to represent the AND/OR tables of Leveson and the Decision Tables of Sherry, and we demonstrate how PVS's TCCs can expose and help isolate errors in the latter. We extend this approach to represent the mode transition tables of the Software Cost Reduction (SCR) method in an attractive manner. We show how PVS can check these tables for well-formedness, and how PVS's model checking capabilities can be used to verify invariants and reachability properties of SCR requirements specifications, and inclusion relations between the behaviors of different specifications. These examples demonstrate how several capabilities of the PVS language and verification system can be used in combination to provide customized support for specific methodologies for documenting and analyzing requirements. Because they use only the standard capabilities of PVS, users can adapt and extend these customizations to suit their own needs. Those developing dedicated tools for individual methodologies may find these constructions in PVS helpful for prototyping purposes, or as a useful adjunct to a dedicated tool when the capabilities of a full theorem prover are required. The examples also illustrate the power and utility of an integrated general-purpose system such as PVS. For example, there was no need to adapt or extend the PVS model checker to make it work with SCR specifications described using the PVS TABLE construct: the model checker is applicable to any transition relation, independently of the PVS language constructs used in its definition.

EVA tools and equipment reference book

NASA Technical Reports Server (NTRS)

Fullerton, R. K.

1993-01-01

This document contains a mixture of tools and equipment used throughout the space shuttle-based extravehicular activity (EVA) program. Promising items which have reached the prototype stage of development are also included, but should not be considered certified ready for flight. Each item is described with a photo, a written discussion, technical specifications, dimensional drawings, and points of contact for additional information. Numbers on the upper left-hand corner of each photo may be used to order specific pictures from NASA and contractor photo libraries. Points of contact were classified as either operational or technical. An operational contact is an engineer from JSC Mission Operations Directorate who is familiar with the basic function and on-orbit use of the tool. A technical contact would be the best source of detailed technical specifications and is typically the NASA subsystem manager. The technical information table for each item uses the following terms to describe the availability or status of each hardware item: Standard - Flown on every mission as standard manifest; Flight specific - Potentially available for flight, not flown every mission (flight certification cannot be guaranteed and recertification may be required); Reference only - Item no longer in active inventory or not recommended for future use, some items may be too application-specific for general use; and Developmental - In the prototype stage only and not yet available for flight. The current availability and certification of any flight-specific tool should be verified with the technical point of contact. Those tools built and fit checked for Hubble Space Telescope maintenance are program dedicated and are not available to other customers. Other customers may have identical tools built from the existing, already certified designs as an optional service.

Design of compact freeform lens for application specific Light-Emitting Diode packaging.

PubMed

Wang, Kai; Chen, Fei; Liu, Zongyuan; Luo, Xiaobing; Liu, Sheng

2010-01-18

Application specific LED packaging (ASLP) is an emerging technology for high performance LED lighting. We introduced a practical design method of compact freeform lens for extended sources used in ASLP. A new ASLP for road lighting was successfully obtained by integrating a polycarbonate compact freeform lens of small form factor with traditional LED packaging. Optical performance of the ASLP was investigated by both numerical simulation based on Monte Carlo ray tracing method and experiments. Results demonstrated that, comparing with traditional LED module integrated with secondary optics, the ASLP had advantages of much smaller size in volume (approximately 1/8), higher system lumen efficiency (approximately 8.1%), lower cost and more convenience for customers to design and assembly, enabling possible much wider applications of LED for general road lighting. Tolerance analyses were also conducted. Installation errors of horizontal and vertical deviations had more effects on the shape and uniformity of radiation pattern compared with rotational deviation. The tolerances of horizontal, vertical and rotational deviations of this lens were 0.11 mm, 0.14 mm and 2.4 degrees respectively, which were acceptable in engineering.

Advances in Integrated Computational Materials Engineering "ICME"

NASA Astrophysics Data System (ADS)

Hirsch, Jürgen

The methods of Integrated Computational Materials Engineering that were developed and successfully applied for Aluminium have been constantly improved. The main aspects and recent advances of integrated material and process modeling are simulations of material properties like strength and forming properties and for the specific microstructure evolution during processing (rolling, extrusion, annealing) under the influence of material constitution and process variations through the production process down to the final application. Examples are discussed for the through-process simulation of microstructures and related properties of Aluminium sheet, including DC ingot casting, pre-heating and homogenization, hot and cold rolling, final annealing. New results are included of simulation solution annealing and age hardening of 6xxx alloys for automotive applications. Physically based quantitative descriptions and computer assisted evaluation methods are new ICME methods of integrating new simulation tools also for customer applications, like heat affected zones in welding of age hardening alloys. The aspects of estimating the effect of specific elements due to growing recycling volumes requested also for high end Aluminium products are also discussed, being of special interest in the Aluminium producing industries.

Computer programming for generating visual stimuli.

PubMed

Bukhari, Farhan; Kurylo, Daniel D

2008-02-01

Critical to vision research is the generation of visual displays with precise control over stimulus metrics. Generating stimuli often requires adapting commercial software or developing specialized software for specific research applications. In order to facilitate this process, we give here an overview that allows nonexpert users to generate and customize stimuli for vision research. We first give a review of relevant hardware and software considerations, to allow the selection of display hardware, operating system, programming language, and graphics packages most appropriate for specific research applications. We then describe the framework of a generic computer program that can be adapted for use with a broad range of experimental applications. Stimuli are generated in the context of trial events, allowing the display of text messages, the monitoring of subject responses and reaction times, and the inclusion of contingency algorithms. This approach allows direct control and management of computer-generated visual stimuli while utilizing the full capabilities of modern hardware and software systems. The flowchart and source code for the stimulus-generating program may be downloaded from www.psychonomic.org/archive.

An Open Source Extensible Smart Energy Framework

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rankin, Linda

Aggregated distributed energy resources are the subject of much interest in the energy industry and are expected to play an important role in meeting our future energy needs by changing how we use, distribute and generate electricity. This energy future includes an increased amount of energy from renewable resources, load management techniques to improve resiliency and reliability, and distributed energy storage and generation capabilities that can be managed to meet the needs of the grid as well as individual customers. These energy assets are commonly referred to as Distributed Energy Resources (DER). DERs rely on a means to communicate informationmore » between an energy provider and multitudes of devices. Today DER control systems are typically vendor-specific, using custom hardware and software solutions. As a result, customers are locked into communication transport protocols, applications, tools, and data formats. Today’s systems are often difficult to extend to meet new application requirements, resulting in stranded assets when business requirements or energy management models evolve. By partnering with industry advisors and researchers, an implementation DER research platform was developed called the Smart Energy Framework (SEF). The hypothesis of this research was that an open source Internet of Things (IoT) framework could play a role in creating a commodity-based eco-system for DER assets that would reduce costs and provide interoperable products. SEF is based on the AllJoynTM IoT open source framework. The demonstration system incorporated DER assets, specifically batteries and smart water heaters. To verify the behavior of the distributed system, models of water heaters and batteries were also developed. An IoT interface for communicating between the assets and a control server was defined. This interface supports a series of “events” and telemetry reporting, similar to those defined by current smart grid communication standards. The results of this effort demonstrated the feasibility and application potential of using IoT frameworks for the creation of commodity-based DER systems. All of the identified commodity-based system requirements were met by the AllJoyn framework. By having commodity solutions, small vendors can enter the market and the cost of implementation for all parties is reduced. Utilities and aggregators can choose from multiple interoperable products reducing the risk of stranded assets. Based on this research it is recommended that interfaces based on existing smart grid communication protocol standards be created for these emerging IoT frameworks. These interfaces should be standardized as part of the IoT framework allowing for interoperability testing and certification. Similarly, IoT frameworks are introducing application level security. This type of security is needed for protecting application and platforms and will be important moving forward. Recommendations are that along with DER-based data model interfaces, platform and application security requirements also be prescribed when IoT devices support DER applications.« less

Evaluation of a patient specific femoral alignment guide for hip resurfacing.

PubMed

Olsen, Michael; Naudie, Douglas D; Edwards, Max R; Sellan, Michael E; McCalden, Richard W; Schemitsch, Emil H

2014-03-01

A novel alternative to conventional instrumentation for femoral component insertion in hip resurfacing is a patient specific, computed tomography based femoral alignment guide. A benchside study using cadaveric femora was performed comparing a custom alignment guide to conventional instrumentation and computer navigation. A clinical series of twenty-five hip resurfacings utilizing a custom alignment guide was conducted by three surgeons experienced in hip resurfacing. Using cadaveric femora, the custom guide was comparable to conventional instrumentation with computer navigation proving superior to both. Clinical femoral component alignment accuracy was 3.7° and measured within ± 5° of plan in 20 of 24 cases. Patient specific femoral alignment guides provide a satisfactory level of accuracy and may be a better alternative to conventional instrumentation for initial femoral guidewire placement in hip resurfacing. Crown Copyright © 2014. All rights reserved.

76 FR 9320 - Foreign-Trade Zone 274-Butte-Silver Bow, MT; Application for Manufacturing Authority REC Silicon...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-17

... Silicon to realize logistical benefits through the use of weekly customs entry procedures. Customs duties... Avenue, NW., Washington, DC 20230-0002, and in the ``Reading Room'' section of the Board's Web site...

Development of the custom polymeric materials specific for aflatoxin B1 and ochratoxin A for application with the ToxiQuant T1 sensor tool.

PubMed

Piletska, Elena; Karim, Kal; Coker, Raymond; Piletsky, Sergey

2010-04-16

Two polymers were computationally designed with affinity to two of the most abundant mycotoxins aflatoxin B1 (AFB1) and ochratoxin A (OTA) for application in the ToxiQuant T1 System. The principle of quantification of AFB1 and OTA using the ToxiQuant T1 instrument comprised of a fluorimetric analysis of mycotoxins adsorbed on the polymer upon exposure to UV light. High affinity of the developed resins allowed the adsorption of both toxins as discrete bands on the top of the cartridge with detection limit as low as 1ng quantity of mycotoxins. Copyright 2009 Elsevier B.V. All rights reserved.

Successful marriage: American Panel Corporation and LG Philips LCD custom-designed avionic, shipboard, and rugged ground vehicle display modules from a consumer-oriented fabrication facility

NASA Astrophysics Data System (ADS)

Dunn, William; Garrett, Kimberly S.

2001-09-01

American panel corporation (APC) believes the use of custom designed (instead of ruggedized commercial) AMLCD cells is the only way to meet the specific environmental and performance requirements of the military/commercial avionic, shipboard and rugged ground vehicle markets. The APC/LG.Philips LCD (LG) custom approach mitigates risk to the end-user in many ways. As a part of the APC/LG long- term agreement LG has committed to provide module level equivalent (form, fit and function equivalent) panels for a period of ten years. No other commercial glass manufacturer has provided such an agreement. With the use of LG's commercial production manufacturing capabilities, APC/LG can provide the opportunity to procure a lifetime buy for any program with delivery of the entire lot within six months of order placement. This ensures that the entire production program will receive identical glass for every unit. The APC/LG relationship works where others have failed due to the number of years spent cultivating the mutual trust and respect necessary for establishing such a partnership, LG's interest in capturing the market share of this niche application, and the magnitude of the initial up-front investment by APC in engineering, tooling, facilities, production equipment, and LCD cell inventory.

Development of Custom 465® Corrosion-Resisting Steel for Landing Gear Applications

NASA Astrophysics Data System (ADS)

Daymond, Benjamin T.; Binot, Nicolas; Schmidt, Michael L.; Preston, Steve; Collins, Richard; Shepherd, Alan

2016-04-01

Existing high-strength low-alloy steels have been in place on landing gear for many years owing to their superior strength and cost performance. However, there have been major advances in improving the strength of high-performance corrosion-resisting steels. These materials have superior environmental robustness and remove the need for harmful protective coatings such as chromates and cadmium now on the list for removal under REACH legislation. A UK government-funded collaborative project is underway targeting a refined specification Custom 465® precipitation hardened stainless steel to replace the current material on Airbus A320 family aircraft main landing gear, a main fitting component developed by Messier-Bugatti-Dowty. This is a collaborative project between Airbus, Messier-Bugatti-Dowty, and Carpenter Technology Corporation. An extensive series of coupon tests on four production Heats of the material have been conducted, to obtain a full range of mechanical, fatigue, and corrosion properties. Custom 465® is an excellent replacement to the current material, with comparable tensile strength and fracture toughness, better ductility, and very good general corrosion and stress corrosion cracking resistance. Fatigue performance is the only significant area of deficit with respect to incumbent materials, fatigue initiation being often related to carbo-titanium-nitride particles and cleavage zones.

The interplay between customer participation and difficulty of design examples in the online designing process and its effect on customer satisfaction: mediational analyses.

PubMed

Chang, Chia-Chi; Chen, Hui-Yun; Huang, I-Chiang

2009-04-01

In the current consumer-centric economy, consumers increasingly desire the opportunity to design their own products in order to express more effectively their self-image. Mass customization, based on efficient and flexible modulization designs, has provided individualized products to satisfy this desire. This work presents an experiment employed to demonstrate that customer participation leads to higher satisfaction. Specifically, the increment in customer satisfaction due to participation is greater when an easy example is provided than when either no example or a difficult one is provided. Additionally, self-congruity plays a mediating role on the customer participation-satisfaction relationship, and this mediating effect varies across different levels of the design example provided in the design process. When an easy design example is present, customer participation has a direct effect on satisfaction, in addition to the indirect effect of self-congruity. When a difficult example is provided, customer participation does not have incremental effects on either self-congruity or customer satisfaction. Finally, when no design example is shown to customers, contrary to our expectation, participation still enhances customer satisfaction due to an increased sense of self-congruity.

Implementing Scientific Simulation Codes Highly Tailored for Vector Architectures Using Custom Configurable Computing Machines

NASA Technical Reports Server (NTRS)

Rutishauser, David

2006-01-01

The motivation for this work comes from an observation that amidst the push for Massively Parallel (MP) solutions to high-end computing problems such as numerical physical simulations, large amounts of legacy code exist that are highly optimized for vector supercomputers. Because re-hosting legacy code often requires a complete re-write of the original code, which can be a very long and expensive effort, this work examines the potential to exploit reconfigurable computing machines in place of a vector supercomputer to implement an essentially unmodified legacy source code. Custom and reconfigurable computing resources could be used to emulate an original application's target platform to the extent required to achieve high performance. To arrive at an architecture that delivers the desired performance subject to limited resources involves solving a multi-variable optimization problem with constraints. Prior research in the area of reconfigurable computing has demonstrated that designing an optimum hardware implementation of a given application under hardware resource constraints is an NP-complete problem. The premise of the approach is that the general issue of applying reconfigurable computing resources to the implementation of an application, maximizing the performance of the computation subject to physical resource constraints, can be made a tractable problem by assuming a computational paradigm, such as vector processing. This research contributes a formulation of the problem and a methodology to design a reconfigurable vector processing implementation of a given application that satisfies a performance metric. A generic, parametric, architectural framework for vector processing implemented in reconfigurable logic is developed as a target for a scheduling/mapping algorithm that maps an input computation to a given instance of the architecture. This algorithm is integrated with an optimization framework to arrive at a specification of the architecture parameters that attempts to minimize execution time, while staying within resource constraints. The flexibility of using a custom reconfigurable implementation is exploited in a unique manner to leverage the lessons learned in vector supercomputer development. The vector processing framework is tailored to the application, with variable parameters that are fixed in traditional vector processing. Benchmark data that demonstrates the functionality and utility of the approach is presented. The benchmark data includes an identified bottleneck in a real case study example vector code, the NASA Langley Terminal Area Simulation System (TASS) application.

User Interface Technology for Formal Specification Development

NASA Technical Reports Server (NTRS)

Lowry, Michael; Philpot, Andrew; Pressburger, Thomas; Underwood, Ian; Lum, Henry, Jr. (Technical Monitor)

1994-01-01

Formal specification development and modification are an essential component of the knowledge-based software life cycle. User interface technology is needed to empower end-users to create their own formal specifications. This paper describes the advanced user interface for AMPHION1 a knowledge-based software engineering system that targets scientific subroutine libraries. AMPHION is a generic, domain-independent architecture that is specialized to an application domain through a declarative domain theory. Formal specification development and reuse is made accessible to end-users through an intuitive graphical interface that provides semantic guidance in creating diagrams denoting formal specifications in an application domain. The diagrams also serve to document the specifications. Automatic deductive program synthesis ensures that end-user specifications are correctly implemented. The tables that drive AMPHION's user interface are automatically compiled from a domain theory; portions of the interface can be customized by the end-user. The user interface facilitates formal specification development by hiding syntactic details, such as logical notation. It also turns some of the barriers for end-user specification development associated with strongly typed formal languages into active sources of guidance, without restricting advanced users. The interface is especially suited for specification modification. AMPHION has been applied to the domain of solar system kinematics through the development of a declarative domain theory. Testing over six months with planetary scientists indicates that AMPHION's interactive specification acquisition paradigm enables users to develop, modify, and reuse specifications at least an order of magnitude more rapidly than manual program development.

Enabling Requirements-Based Programming for Highly-Dependable Complex Parallel and Distributed Systems

NASA Technical Reports Server (NTRS)

Hinchey, Michael G.; Rash, James L.; Rouff, Christopher A.

2005-01-01

The manual application of formal methods in system specification has produced successes, but in the end, despite any claims and assertions by practitioners, there is no provable relationship between a manually derived system specification or formal model and the customer's original requirements. Complex parallel and distributed system present the worst case implications for today s dearth of viable approaches for achieving system dependability. No avenue other than formal methods constitutes a serious contender for resolving the problem, and so recognition of requirements-based programming has come at a critical juncture. We describe a new, NASA-developed automated requirement-based programming method that can be applied to certain classes of systems, including complex parallel and distributed systems, to achieve a high degree of dependability.

Comparison of Intraoperatively Built Custom Linked Seeds Versus Loose Seed Gun Applicator Technique Using Real-Time Intraoperative Planning for Permanent Prostate Brachytherapy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zauls, A. Jason; Ashenafi, Michael S.; Onicescu, Georgiana

2011-11-15

Purpose: To report our dosimetric results using a novel push-button seed delivery system that constructs custom links of seeds intraoperatively. Methods and Materials: From 2005 to 2007, 43 patients underwent implantation using a gun applicator (GA), and from 2007 to 2008, 48 patientsunderwent implantation with a novel technique allowing creation of intraoperatively built custom links of seeds (IBCL). Specific endpoint analyses were prostate D90% (pD90%), rV100% > 1.3 cc, and overall time under anesthesia. Results: Final analyses included 91 patients, 43 GA and 48 IBCL. Absolute change in pD90% ({Delta}pD90%) between intraoperative and postoperative plans was evaluated. Using GA method,more » the {Delta}pD90% was -8.1Gy and -12.8Gy for I-125 and Pd-103 implants, respectively. Similarly, the IBCL technique resulted in a {Delta}pD90% of -8.7Gy and -9.8Gy for I-125 and Pd-103 implants, respectively. No statistically significant difference in {Delta}pD90% was found comparing methods. The GA method had two intraoperative and 10 postoperative rV100% >1.3 cc. For IBCL, five intraoperative and eight postoperative plans had rV100% >1.3 cc. For GA, the mean time under anesthesia was 75 min and 87 min for Pd-103 and I-125 implants, respectively. For IBCL, the mean time was 86 and 98 min for Pd-103 and I-125. There was a statistical difference between the methods when comparing mean time under anesthesia. Conclusions: Dosimetrically relevant endpoints were equivalent between the two methods. Currently, time under anesthesia is longer using the IBCL technique but has decreased over time. IBCL is a straightforward brachytherapy technique that can be implemented into clinical practice as an alternative to gun applicators.« less

Quantitative intact specimen magnetic resonance microscopy at 3.0 T.

PubMed

Bath, Kevin G; Voss, Henning U; Jing, Deqiang; Anderson, Stewart; Hempstead, Barbara; Lee, Francis S; Dyke, Jonathan P; Ballon, Douglas J

2009-06-01

In this report, we discuss the application of a methodology for high-contrast, high-resolution magnetic resonance microscopy (MRM) of murine tissue using a 3.0-T imaging system. We employed a threefold strategy that included customized specimen preparation to maximize image contrast, three-dimensional data acquisition to minimize scan time and custom radiofrequency resonator design to maximize signal sensitivity. Images had a resolution of 100 x 78 x 78 microm(3) with a signal-to-noise ratio per voxel greater than 25:1 and excellent contrast-to-noise ratios over a 30-min acquisition. We quantitatively validated the methods through comparisons of neuroanatomy across two lines of genetically engineered mice. Specifically, we were able to detect volumetric differences of as little as 9% between genetically engineered mouse strains in multiple brain regions that were predictive of underlying impairments in brain development. The overall methodology was straightforward to implement and provides ready access to basic MRM at field strengths that are widely available in both the laboratory and the clinic.

Ethno-pharmaceutical Formulations in Kurdish Ethno-medicine.

PubMed

Tahvilian, Reza; Shahriari, Soheyla; Faramarzi, Akbar; Komasi, Ayoob

2014-01-01

Kermanshah is a city in west of Iran with a specific customs and cultures between the people who are living here. According to historical documents these cultures are very ancient and belong to more than one thousand years. The climate condition in this place forces people to find the solution of their problems using the plants and natural facilities. Therefore traditional healers were so active in Kermanshah. From 8000 of plant species in Iran more than 1200 species has grown in Kermanshah. The ancient customs, cultures, traditional medicine and formulations generally used by rural populations was transfer from ancient to modern people. Documentation of these traditional methods was studied in this research in order to compare and certified the traditional medicine with modern methods and find new dosage forms of drug with botanical source. It was established that about 50 plant species and 8 types of diseases were distinguished and cured by these people. It is also concluding that utilization of these plants approximately the same as application of plants in recent publications.

3D Printed Organ Models with Physical Properties of Tissue and Integrated Sensors.

PubMed

Qiu, Kaiyan; Zhao, Zichen; Haghiashtiani, Ghazaleh; Guo, Shuang-Zhuang; He, Mingyu; Su, Ruitao; Zhu, Zhijie; Bhuiyan, Didarul B; Murugan, Paari; Meng, Fanben; Park, Sung Hyun; Chu, Chih-Chang; Ogle, Brenda M; Saltzman, Daniel A; Konety, Badrinath R; Sweet, Robert M; McAlpine, Michael C

2018-03-01

The design and development of novel methodologies and customized materials to fabricate patient-specific 3D printed organ models with integrated sensing capabilities could yield advances in smart surgical aids for preoperative planning and rehearsal. Here, we demonstrate 3D printed prostate models with physical properties of tissue and integrated soft electronic sensors using custom-formulated polymeric inks. The models show high quantitative fidelity in static and dynamic mechanical properties, optical characteristics, and anatomical geometries to patient tissues and organs. The models offer tissue-mimicking tactile sensation and behavior and thus can be used for the prediction of organ physical behavior under deformation. The prediction results show good agreement with values obtained from simulations. The models also allow the application of surgical and diagnostic tools to their surface and inner channels. Finally, via the conformal integration of 3D printed soft electronic sensors, pressure applied to the models with surgical tools can be quantitatively measured.

Design and Implementation of a New Real-Time Frequency Sensor Used as Hardware Countermeasure

PubMed Central

Jiménez-Naharro, Raúl; Gómez-Galán, Juan Antonio; Sánchez-Raya, Manuel; Gómez-Bravo, Fernando; Pedro-Carrasco, Manuel

2013-01-01

A new digital countermeasure against attacks related to the clock frequency is –presented. This countermeasure, known as frequency sensor, consists of a local oscillator, a transition detector, a measurement element and an output block. The countermeasure has been designed using a full-custom technique implemented in an Application-Specific Integrated Circuit (ASIC), and the implementation has been verified and characterized with an integrated design using a 0.35 μm standard Complementary Metal Oxide Semiconductor (CMOS) technology (Very Large Scale Implementation—VLSI implementation). The proposed solution is configurable in resolution time and allowed range of period, achieving a minimum resolution time of only 1.91 ns and an initialization time of 5.84 ns. The proposed VLSI implementation shows better results than other solutions, such as digital ones based on semi-custom techniques and analog ones based on band pass filters, all design parameters considered. Finally, a counter has been used to verify the good performance of the countermeasure in avoiding the success of an attack. PMID:24008285

Ethno-pharmaceutical Formulations in Kurdish Ethno-medicine

PubMed Central

Tahvilian, Reza; Shahriari, Soheyla; Faramarzi, Akbar; Komasi, Ayoob

2014-01-01

Kermanshah is a city in west of Iran with a specific customs and cultures between the people who are living here. According to historical documents these cultures are very ancient and belong to more than one thousand years. The climate condition in this place forces people to find the solution of their problems using the plants and natural facilities. Therefore traditional healers were so active in Kermanshah. From 8000 of plant species in Iran more than 1200 species has grown in Kermanshah. The ancient customs, cultures, traditional medicine and formulations generally used by rural populations was transfer from ancient to modern people. Documentation of these traditional methods was studied in this research in order to compare and certified the traditional medicine with modern methods and find new dosage forms of drug with botanical source. It was established that about 50 plant species and 8 types of diseases were distinguished and cured by these people. It is also concluding that utilization of these plants approximately the same as application of plants in recent publications. PMID:25276205

3D Printed Organ Models with Physical Properties of Tissue and Integrated Sensors

PubMed Central

Qiu, Kaiyan; Zhao, Zichen; Haghiashtiani, Ghazaleh; Guo, Shuang-Zhuang; He, Mingyu; Su, Ruitao; Zhu, Zhijie; Bhuiyan, Didarul B.; Murugan, Paari; Meng, Fanben; Park, Sung Hyun; Chu, Chih-Chang; Ogle, Brenda M.; Saltzman, Daniel A.; Konety, Badrinath R.

2017-01-01

The design and development of novel methodologies and customized materials to fabricate patient-specific 3D printed organ models with integrated sensing capabilities could yield advances in smart surgical aids for preoperative planning and rehearsal. Here, we demonstrate 3D printed prostate models with physical properties of tissue and integrated soft electronic sensors using custom-formulated polymeric inks. The models show high quantitative fidelity in static and dynamic mechanical properties, optical characteristics, and anatomical geometries to patient tissues and organs. The models offer tissue-mimicking tactile sensation and behavior and thus can be used for the prediction of organ physical behavior under deformation. The prediction results show good agreement with values obtained from simulations. The models also allow the application of surgical and diagnostic tools to their surface and inner channels. Finally, via the conformal integration of 3D printed soft electronic sensors, pressure applied to the models with surgical tools can be quantitatively measured. PMID:29608202

Balancing generality and specificity in component-based reuse

NASA Technical Reports Server (NTRS)

Eichmann, David A.; Beck, Jon

1992-01-01

For a component industry to be successful, we must move beyond the current techniques of black box reuse and genericity to a more flexible framework supporting customization of components as well as instantiation and composition of components. Customization of components strikes a balanced between creating dozens of variations of a base component and requiring the overhead of unnecessary features of an 'everything but the kitchen sink' component. We argue that design and instantiation of reusable components have competing criteria - design-for-use strives for generality, design-with-reuse strives for specificity - and that providing mechanisms for each can be complementary rather than antagonistic. In particular, we demonstrate how program slicing techniques can be applied to customization of reusable components.

19 CFR 201.141-201.148 - [Reserved

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 3 2010-04-01 2010-04-01 false [Reserved] 201.141-201.148 Section 201.141-201.148 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION GENERAL RULES OF GENERAL APPLICATION.... International Trade Commission §§ 201.141-201.148 [Reserved] ...

19 CFR 201.131-201.139 - [Reserved

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 3 2010-04-01 2010-04-01 false [Reserved] 201.131-201.139 Section 201.131-201.139 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION GENERAL RULES OF GENERAL APPLICATION.... International Trade Commission §§ 201.131-201.139 [Reserved] ...

19 CFR 201.152-201.159 - [Reserved

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 3 2010-04-01 2010-04-01 false [Reserved] 201.152-201.159 Section 201.152-201.159 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION GENERAL RULES OF GENERAL APPLICATION.... International Trade Commission §§ 201.152-201.159 [Reserved] ...

19 CFR 201.171-201.999 - [Reserved

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 3 2010-04-01 2010-04-01 false [Reserved] 201.171-201.999 Section 201.171-201.999 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION GENERAL RULES OF GENERAL APPLICATION.... International Trade Commission §§ 201.171-201.999 [Reserved] ...

19 CFR 201.104-201.109 - [Reserved

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 3 2010-04-01 2010-04-01 false [Reserved] 201.104-201.109 Section 201.104-201.109 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION GENERAL RULES OF GENERAL APPLICATION.... International Trade Commission §§ 201.104-201.109 [Reserved] ...