49 CFR 192.355 - Customer meters and regulators: Protection from damage.

Code of Federal Regulations, 2010 CFR

2010-10-01

... SAFETY TRANSPORTATION OF NATURAL AND OTHER GAS BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Customer... terminal must— (1) Be rain and insect resistant; (2) Be located at a place where gas from the vent can... that houses a customer meter or regulator at a place where vehicular traffic is anticipated, must be...

Flat Surface Damage Detection System (FSDDS)

NASA Technical Reports Server (NTRS)

Williams, Martha; Lewis, Mark; Gibson, Tracy; Lane, John; Medelius, Pedro; Snyder, Sarah; Ciarlariello, Dan; Parks, Steve; Carrejo, Danny; Rojdev, Kristina

2013-01-01

The Flat Surface Damage Detection system (FSDDS} is a sensory system that is capable of detecting impact damages to surfaces utilizing a novel sensor system. This system will provide the ability to monitor the integrity of an inflatable habitat during in situ system health monitoring. The system consists of three main custom designed subsystems: the multi-layer sensing panel, the embedded monitoring system, and the graphical user interface (GUI). The GUI LABVIEW software uses a custom developed damage detection algorithm to determine the damage location based on the sequence of broken sensing lines. It estimates the damage size, the maximum depth, and plots the damage location on a graph. Successfully demonstrated as a stand alone technology during 2011 D-RATS. Software modification also allowed for communication with HDU avionics crew display which was demonstrated remotely (KSC to JSC} during 2012 integration testing. Integrated FSDDS system and stand alone multi-panel systems were demonstrated remotely and at JSC, Mission Operations Test using Space Network Research Federation (SNRF} network in 2012. FY13, FSDDS multi-panel integration with JSC and SNRF network Technology can allow for integration with other complementary damage detection systems.

Estimating Power Outage Cost based on a Survey for Industrial Customers

NASA Astrophysics Data System (ADS)

Yoshida, Yoshikuni; Matsuhashi, Ryuji

A survey was conducted on power outage cost for industrial customers. 5139 factories, which are designated energy management factories in Japan, answered their power consumption and the loss of production value due to the power outage in an hour in summer weekday. The median of unit cost of power outage of whole sectors is estimated as 672 yen/kWh. The sector of services for amusement and hobbies and the sector of manufacture of information and communication electronics equipment relatively have higher unit cost of power outage. Direct damage cost from power outage in whole sectors reaches 77 billion yen. Then utilizing input-output analysis, we estimated indirect damage cost that is caused by the repercussion of production halt. Indirect damage cost in whole sectors reaches 91 billion yen. The sector of wholesale and retail trade has the largest direct damage cost. The sector of manufacture of transportation equipment has the largest indirect damage cost.

Updated Value of Service Reliability Estimates for Electric Utility Customers in the United States

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sullivan, Michael; Schellenberg, Josh; Blundell, Marshall

2015-01-01

This report updates the 2009 meta-analysis that provides estimates of the value of service reliability for electricity customers in the United States (U.S.). The meta-dataset now includes 34 different datasets from surveys fielded by 10 different utility companies between 1989 and 2012. Because these studies used nearly identical interruption cost estimation or willingness-to-pay/accept methods, it was possible to integrate their results into a single meta-dataset describing the value of electric service reliability observed in all of them. Once the datasets from the various studies were combined, a two-part regression model was used to estimate customer damage functions that can bemore » generally applied to calculate customer interruption costs per event by season, time of day, day of week, and geographical regions within the U.S. for industrial, commercial, and residential customers. This report focuses on the backwards stepwise selection process that was used to develop the final revised model for all customer classes. Across customer classes, the revised customer interruption cost model has improved significantly because it incorporates more data and does not include the many extraneous variables that were in the original specification from the 2009 meta-analysis. The backwards stepwise selection process led to a more parsimonious model that only included key variables, while still achieving comparable out-of-sample predictive performance. In turn, users of interruption cost estimation tools such as the Interruption Cost Estimate (ICE) Calculator will have less customer characteristics information to provide and the associated inputs page will be far less cumbersome. The upcoming new version of the ICE Calculator is anticipated to be released in 2015.« less

Customized dynamic splinting: orthoses that promote optimal function and recovery after radial nerve injury: a case report.

PubMed

McKee, Pat; Nguyen, Cecilia

2007-01-01

Radial nerve injury is a relatively common occurrence and recovery depends on the level of injury and extent of connective tissue damage. Orthoses (splints) are often provided to compensate for lost motor power. This article chronicles the recovery, over 27 months, of a 76-year-old woman who sustained a high radial nerve injury of her dominant arm during surgery for total shoulder replacement (Delta Reverse). Customized, low-profile dynamic splints, unlike any previously published design, were developed to address her goals for functional independence and the biological needs of the tissues. Dynamic power was provided to the wrist, fingers, and thumb by elastic cords and thin, flexible thermoplastic, without the need of an outrigger, thus avoiding the need for wire bending and cutting. At the outset, the splint was forearm-based and when wrist extension power was recovered, a hand-based splint was designed. Eventually, a circumferential hand-based thumb-stabilizing splint fulfilled most of the remaining orthotic requirements.

Avast Ye Salty Dogs: Salt damage in the context of coastal residential construction and historical maritime timbers

Treesearch

Grant T. Kirker; Samuel L. Zelinka; Leandro Passarini

2016-01-01

Salt damage is a frequent problem in wood exposed to seawater and other saline environments. Symptoms of salt damage are often referred to as fuzzy wood and have been historically considered non-structural damage, but a growing number of customer inquiries have prompted a re-evaluation of this phenomenon. This paper details several case studies involving salt damage,...

19 CFR 133.51 - Relief from forfeiture or liquidated damages.

Code of Federal Regulations, 2013 CFR

2013-04-01

... Assessment of Liquidated Damages § 133.51 Relief from forfeiture or liquidated damages. (a) Petition for... of § 133.24 or § 133.46. (b) Conditioned relief. In appropriate cases, except for articles bearing a... following conditions and such other conditions as may be specified by the appropriate Customs authority: (1...

19 CFR 133.51 - Relief from forfeiture or liquidated damages.

Code of Federal Regulations, 2010 CFR

2010-04-01

... Assessment of Liquidated Damages § 133.51 Relief from forfeiture or liquidated damages. (a) Petition for... of § 133.24 or § 133.46. (b) Conditioned relief. In appropriate cases, except for articles bearing a... following conditions and such other conditions as may be specified by the appropriate Customs authority: (1...

19 CFR 133.51 - Relief from forfeiture or liquidated damages.

Code of Federal Regulations, 2012 CFR

2012-04-01

... Assessment of Liquidated Damages § 133.51 Relief from forfeiture or liquidated damages. (a) Petition for... of § 133.24 or § 133.46. (b) Conditioned relief. In appropriate cases, except for articles bearing a... following conditions and such other conditions as may be specified by the appropriate Customs authority: (1...

19 CFR 133.51 - Relief from forfeiture or liquidated damages.

Code of Federal Regulations, 2011 CFR

2011-04-01

... Assessment of Liquidated Damages § 133.51 Relief from forfeiture or liquidated damages. (a) Petition for... of § 133.24 or § 133.46. (b) Conditioned relief. In appropriate cases, except for articles bearing a... following conditions and such other conditions as may be specified by the appropriate Customs authority: (1...

19 CFR 133.51 - Relief from forfeiture or liquidated damages.

Code of Federal Regulations, 2014 CFR

2014-04-01

... Assessment of Liquidated Damages § 133.51 Relief from forfeiture or liquidated damages. (a) Petition for... of § 133.24 or § 133.46. (b) Conditioned relief. In appropriate cases, except for articles bearing a... following conditions and such other conditions as may be specified by the appropriate Customs authority: (1...

Guided wave energy trapping to detect hidden multilayer delamination damage

NASA Astrophysics Data System (ADS)

Leckey, Cara A. C.; Seebo, Jeffrey P.

2015-03-01

Nondestructive Evaluation (NDE) and Structural Health Monitoring (SHM) simulation tools capable of modeling three-dimensional (3D) realistic energy-damage interactions are needed for aerospace composites. Current practice in NDE/SHM simulation for composites commonly involves over-simplification of the material parameters and/or a simplified two-dimensional (2D) approach. The unique damage types that occur in composite materials (delamination, microcracking, etc) develop as complex 3D geometry features. This paper discusses the application of 3D custom ultrasonic simulation tools to study wave interaction with multilayer delamination damage in carbon-fiber reinforced polymer (CFRP) composites. In particular, simulation based studies of ultrasonic guided wave energy trapping due to multilayer delamination damage were performed. The simulation results show changes in energy trapping at the composite surface as additional delaminations are added through the composite thickness. The results demonstrate a potential approach for identifying the presence of hidden multilayer delamination damage in applications where only single-sided access to a component is available. The paper also describes recent advancements in optimizing the custom ultrasonic simulation code for increases in computation speed.

NDE and SHM Simulation for CFRP Composites

NASA Technical Reports Server (NTRS)

Leckey, Cara A. C.; Parker, F. Raymond

2014-01-01

Ultrasound-based nondestructive evaluation (NDE) is a common technique for damage detection in composite materials. There is a need for advanced NDE that goes beyond damage detection to damage quantification and characterization in order to enable data driven prognostics. The damage types that exist in carbon fiber-reinforced polymer (CFRP) composites include microcracking and delaminations, and can be initiated and grown via impact forces (due to ground vehicles, tool drops, bird strikes, etc), fatigue, and extreme environmental changes. X-ray microfocus computed tomography data, among other methods, have shown that these damage types often result in voids/discontinuities of a complex volumetric shape. The specific damage geometry and location within ply layers affect damage growth. Realistic threedimensional NDE and structural health monitoring (SHM) simulations can aid in the development and optimization of damage quantification and characterization techniques. This paper is an overview of ongoing work towards realistic NDE and SHM simulation tools for composites, and also discusses NASA's need for such simulation tools in aeronautics and spaceflight. The paper describes the development and implementation of a custom ultrasound simulation tool that is used to model ultrasonic wave interaction with realistic 3-dimensional damage in CFRP composites. The custom code uses elastodynamic finite integration technique and is parallelized to run efficiently on computing cluster or multicore machines.

Comparative study of manufacturing condyle implant using rapid prototyping and CNC machining

NASA Astrophysics Data System (ADS)

Bojanampati, S.; Karthikeyan, R.; Islam, MD; Venugopal, S.

2018-04-01

Injuries to the cranio-maxillofacial area caused by road traffic accidents (RTAs), fall from heights, birth defects, metabolic disorders and tumors affect a rising number of patients in the United Arab Emirates (UAE), and require maxillofacial surgery. Mandibular reconstruction poses a specific challenge in both functionality and aesthetics, and involves replacement of the damaged bone by a custom made implant. Due to material, design cycle time and manufacturing process time, such implants are in many instances not affordable to patients. In this paper, the feasibility of designing and manufacturing low-cost, custom made condyle implant is assessed using two different approaches, consisting of rapid prototyping and three-axis computer numerically controlled (CNC) machining. Two candidate rapid prototyping techniques are considered, namely fused deposition modeling (FDM) and three-dimensional printing followed by sand casting The feasibility of the proposed manufacturing processes is evaluated based on manufacturing time, cost, quality, and reliability.

Computer service not liable for customer's HIV infection.

PubMed

1996-12-27

A U.S. District judge ruled that Prodigy Services Co. cannot be held liable for damages because one of its employees infected a customer with HIV. The customer, [name removed], claimed that the employee, [name removed], granted her unlimited access to his online account and repeatedly denied he was HIV-positive. The judge ruled that [name removed]' conduct, failing to disclose his HIV status and having unprotected sex, was outside the scope of his employment with Prodigy.

49 CFR 375.201 - What is my normal liability for loss and damage when I accept goods from an individual shipper?

Code of Federal Regulations, 2010 CFR

2010-10-01

...; CONSUMER PROTECTION REGULATIONS Before Offering Services to My Customers Liability Considerations § 375.201... Protection Obligation—In general, your liability is for the household goods that are lost, damaged, destroyed...

7 CFR 1767.28 - Customer accounts expenses.

Code of Federal Regulations, 2011 CFR

2011-01-01

... the cost of labor, employee pensions and benefits, social security and other payroll taxes, injuries... benefits, social security and other payroll taxes, injuries and damages, materials used, and expenses..., employee pensions and benefits, social security and other payroll taxes, injuries and damages, materials...

7 CFR 1767.29 - Customer service and informational expenses.

Code of Federal Regulations, 2013 CFR

2013-01-01

... of labor, employee pensions and benefits, social security and other payroll taxes, injuries and..., social security and other payroll taxes, injuries and damages, materials used, and expenses incurred in... pensions and benefits, social security and other payroll taxes, injuries and damages, materials used, and...

7 CFR 1767.29 - Customer service and informational expenses.

Code of Federal Regulations, 2011 CFR

2011-01-01

... of labor, employee pensions and benefits, social security and other payroll taxes, injuries and..., social security and other payroll taxes, injuries and damages, materials used, and expenses incurred in... pensions and benefits, social security and other payroll taxes, injuries and damages, materials used, and...

7 CFR 1767.29 - Customer service and informational expenses.

Code of Federal Regulations, 2012 CFR

2012-01-01

... of labor, employee pensions and benefits, social security and other payroll taxes, injuries and..., social security and other payroll taxes, injuries and damages, materials used, and expenses incurred in... pensions and benefits, social security and other payroll taxes, injuries and damages, materials used, and...

7 CFR 1767.29 - Customer service and informational expenses.

Code of Federal Regulations, 2010 CFR

2010-01-01

... of labor, employee pensions and benefits, social security and other payroll taxes, injuries and..., social security and other payroll taxes, injuries and damages, materials used, and expenses incurred in... pensions and benefits, social security and other payroll taxes, injuries and damages, materials used, and...

7 CFR 1767.29 - Customer service and informational expenses.

Code of Federal Regulations, 2014 CFR

2014-01-01

... of labor, employee pensions and benefits, social security and other payroll taxes, injuries and..., social security and other payroll taxes, injuries and damages, materials used, and expenses incurred in... pensions and benefits, social security and other payroll taxes, injuries and damages, materials used, and...

19 CFR 0.1 - Customs revenue function regulations issued under the authority of the Departments of the...

Code of Federal Regulations, 2010 CFR

2010-04-01

... customs revenue functions on behalf of the Secretary of the Treasury when the subject matter of the... 19 Customs Duties 1 2010-04-01 2010-04-01 false Customs revenue function regulations issued under the authority of the Departments of the Treasury and Homeland Security. 0.1 Section 0.1 Customs Duties...

19 CFR 0.1 - Customs revenue function regulations issued under the authority of the Departments of the...

Code of Federal Regulations, 2011 CFR

2011-04-01

... customs revenue functions on behalf of the Secretary of the Treasury when the subject matter of the... 19 Customs Duties 1 2011-04-01 2011-04-01 false Customs revenue function regulations issued under the authority of the Departments of the Treasury and Homeland Security. 0.1 Section 0.1 Customs Duties...

19 CFR 0.1 - Customs revenue function regulations issued under the authority of the Departments of the...

Code of Federal Regulations, 2012 CFR

2012-04-01

... customs revenue functions on behalf of the Secretary of the Treasury when the subject matter of the... 19 Customs Duties 1 2012-04-01 2012-04-01 false Customs revenue function regulations issued under the authority of the Departments of the Treasury and Homeland Security. 0.1 Section 0.1 Customs Duties...

19 CFR 0.1 - Customs revenue function regulations issued under the authority of the Departments of the...

Code of Federal Regulations, 2014 CFR

2014-04-01

... customs revenue functions on behalf of the Secretary of the Treasury when the subject matter of the... 19 Customs Duties 1 2014-04-01 2014-04-01 false Customs revenue function regulations issued under the authority of the Departments of the Treasury and Homeland Security. 0.1 Section 0.1 Customs Duties...

19 CFR 0.1 - Customs revenue function regulations issued under the authority of the Departments of the...

Code of Federal Regulations, 2013 CFR

2013-04-01

... customs revenue functions on behalf of the Secretary of the Treasury when the subject matter of the... 19 Customs Duties 1 2013-04-01 2013-04-01 false Customs revenue function regulations issued under the authority of the Departments of the Treasury and Homeland Security. 0.1 Section 0.1 Customs Duties...

Design of Smart Multi-Functional Integrated Aviation Photoelectric Payload

NASA Astrophysics Data System (ADS)

Zhang, X.

2018-04-01

To coordinate with the small UAV at reconnaissance mission, we've developed a smart multi-functional integrated aviation photoelectric payload. The payload weighs only 1kg, and has a two-axis stabilized platform with visible task payload, infrared task payload, laser pointers and video tracker. The photoelectric payload could complete the reconnaissance tasks above the target area (including visible and infrared). Because of its light weight, small size, full-featured, high integrated, the constraints of the UAV platform carrying the payload will be reduced a lot, which helps the payload suit for more extensive using occasions. So all users of this type of smart multi-functional integrated aviation photoelectric payload will do better works on completion of the ground to better pinpoint targets, artillery calibration, assessment of observe strike damage, customs officials and other tasks.

Retinal ganglion cell damage in an experimental rodent model of blast-mediated traumatic brain injury.

PubMed

Mohan, Kabhilan; Kecova, Helga; Hernandez-Merino, Elena; Kardon, Randy H; Harper, Matthew M

2013-05-15

To evaluate retina and optic nerve damage following experimental blast injury. Healthy adult mice were exposed to an overpressure blast wave using a custom-built blast chamber. The effects of blast exposure on retina and optic nerve function and structure were evaluated using the pattern electroretinogram (pERG), spectral domain optical coherence tomography (OCT), and the chromatic pupil light reflex. Assessment of the pupil response to light demonstrated decreased maximum pupil constriction diameter in blast-injured mice using red light or blue light stimuli 24 hours after injury compared with baseline in the eye exposed to direct blast injury. A decrease in the pupil light reflex was not observed chronically following blast exposure. We observed a biphasic pERG decrease with the acute injury recovering by 24 hours postblast and the chronic injury appearing at 4 months postblast injury. Furthermore, at 3 months following injury, a significant decrease in the retinal nerve fiber layer was observed using OCT compared with controls. Histologic analysis of the retina and optic nerve revealed punctate regions of reduced cellularity in the ganglion cell layer and damage to optic nerves. Additionally, a significant upregulation of proteins associated with oxidative stress was observed acutely following blast exposure compared with control mice. Our study demonstrates that decrements in retinal ganglion cell responses can be detected after blast injury using noninvasive functional and structural tests. These objective responses may serve as surrogate tests for higher CNS functions following traumatic brain injury that are difficult to quantify.

Phenology and density of balsam twig aphid, Mindarus abietinus Koch (Homoptera: Aphididae) in relation to bud break, shoot damage, and value of fir Christmas trees.

PubMed

Fondren, K M; McCullough, D G

2003-12-01

The balsam twig aphid, Mindarus abietinus Koch (Homoptera: Aphididae), is a major insect pest of balsam and Fraser fir grown for Christmas trees. Our objectives in this study were to 1) monitor the phenology of A. abietinus in fir plantations; 2) assess relationships among M. abietinus density, tree phenology, and damage to tree foliage; and 3) develop an esthetic injury level for M. abietinus on Christmas trees. We monitored phenology of M. abietinus and fir trees on three commercial Christmas tree plantations in central and northern Lower Michigan for 3 yr (1999-2001). Phenology of M. abietinus fundatrices and sexuparae was strongly correlated with accumulated degree-days (DD) base 10 degrees C. Fundatrices matured by approximately 83 DD(10 degrees C) and sexuparae were first observed at approximately 83-111 DD(10 degrees C). Trees that broke bud approximately 1 wk later than other trees in the same field escaped M. abietinus damage and shoot expansion rate in spring was generally positively correlated with M. abietinus damage. Retail customers surveyed at a choose-and-cut Christmas plantation in 2 yr did not consistently differentiate between similarly sized trees with no, light, and moderate M. abietinus damage, but heavy damage (>50% damaged shoots) did affect customer perception. Similarly, when wholesale grades were assigned, the high quality Grade 1 trees had up to 40% shoot damage, whereas Grade 2 trees had 32-62% shoot damage. Two trees ranked as unsaleable had sparse canopies and distorted needles on 42% to almost 100% of the shoots.

VERDE Analytic Modules

DOE Office of Scientific and Technical Information (OSTI.GOV)

2008-01-15

The Verde Analytic Modules permit the user to ingest openly available data feeds about phenomenology (storm tracks, wind, precipitation, earthquake, wildfires, and similar natural and manmade power grid disruptions and forecast power outages, restoration times, customers outaged, and key facilities that will lose power. Damage areas are predicted using historic damage criteria of the affected area. The modules use a cellular automata approach to estimating the distribution circuits assigned to geo-located substations. Population estimates served within the service areas are located within 1 km grid cells and converted to customer counts by conversion through demographic estimation of households and commercialmore » firms within the population cells. Restoration times are estimated by agent-based simulation of restoration crews working according to utility published prioritization calibrated by historic performance.« less

Customizing Perimetric Locations Based on En Face Images of Retinal Nerve Fiber Bundles With Glaucomatous Damage

PubMed Central

Alluwimi, Muhammed S.; Swanson, William H.; Malinovsky, Victor E.; King, Brett J.

2018-01-01

Purpose Prior studies suggested the use of customized perimetric locations in glaucoma; these studies were limited by imaging only the superficial depths of the retinal nerve fiber layer (RNFL) and by prolonged perimetric testing. We aimed to develop a rapid perimetric test guided by high-resolution images of RNFL bundles. Methods We recruited 10 patients with glaucoma, ages 56 to 80 years, median 68 years, and 10 controls, ages 55 to 77 years, median 68 years. The patients were selected based on discrepancies between locations of glaucomatous damage for perimetric and structural measures. Montaging was used to produce optical coherence tomography en face images of the RNFL covering much of the 24-2 grid locations. In experiment 1, we presented the Goldmann size III stimulus at preselected retinal locations of glaucomatous damage, using just two contrasts. In experiment 2, we developed an elongated sinusoidal stimulus, aligned within the defect, to measure contrast sensitivities; abnormalities were defined based on lower 95% reference limits derived from the controls. Results The percentage of predicted locations where size III was not seen at 28 dB ranged from 16% to 80%, with a median of 48%. Contrast sensitivity for the sinusoidal stimulus was below the 95% reference range for 37 of 44 stimuli aligned within the defects. Conclusions We developed methods for rapid perimetric testing guided by en face images of the RNFL bundles in patients with glaucoma. Results indicated ganglion cell damage under all of the visible RNFL defects. Translational Relevance Customized perimetric locations have potential to improve clinical assessment of glaucoma. PMID:29576929

Employee customer orientation in manufacturing organizations: joint influences of customer proximity and the senior leadership team.

PubMed

Liao, Hui; Subramony, Mahesh

2008-03-01

Pursuing a customer-focused strategy in manufacturing organizations requires employees across functions to embrace the importance of understanding customer needs and to align their everyday efforts with the goal of satisfying and retaining customers. Little prior research has examined what factors influence employee customer orientation in manufacturing settings. Drawing on the attraction-selection-attrition model, upper-echelons theory, and contingency theories of leadership, this study investigated the joint influences of functional roles' proximity to external customers and the senior leadership team's customer orientation on employee customer orientation. Hierarchical linear modeling results based on data obtained from 4,299 employees and 403 senior leaders from 42 facilities of a global manufacturer operating in 16 countries revealed that employees occupying customer-contact roles had the highest level of customer orientation, followed by employees occupying production roles, and then by those in support roles. In addition, there was a positive relationship between the senior leadership team's customer orientation and employee customer orientation for all 3 functional roles. The positive relationship between the senior leadership team and employee customer orientation was the strongest for employees in support roles, suggesting that lower levels of proximity to external customers may create a greater need for leadership in developing employees' customer-oriented attitudes. Copyright 2008 APA

A custom acoustic emission monitoring system for harsh environments: application to freezing-induced damage in alpine rock-walls

NASA Astrophysics Data System (ADS)

Girard, L.; Beutel, J.; Gruber, S.; Hunziker, J.; Lim, R.; Weber, S.

2012-06-01

We present a custom acoustic emission (AE) monitoring system designed to perform long-term measurements on high-alpine rock-walls. AE monitoring is a common technique for characterizing damage evolution in solid materials. The system is based on a two-channel AE sensor node (AE-node) integrated into a Wireless Sensor Network (WSN) customized for operation in harsh environments. This wireless architecture offers flexibility in the deployment of AE-nodes at any position of the rock-wall that needs to be monitored, within a range of a few hundred meters from a core station connected to the internet. The system achieves near real-time data delivery and allows the user to remotely control the AE detection threshold. In order to protect AE sensors and capture acoustic signals from specific depths of the rock-wall, a special casing was developed. The monitoring system is completed by two probes that measure rock temperature and liquid water content, both probes being also integrated into the WSN. We report a first deployment of the monitoring system on a rock-wall at Jungfraujoch, 3500 m a.s.l., Switzerland. While this first deployment of the monitoring system aims to support fundamental research on processes that damage rock under cold climate, the system could serve a number of other applications, including rock-fall hazard surveillance or structural monitoring of concrete structures.

A custom acoustic emission monitoring system for harsh environments: application to freezing-induced damage in alpine rock walls

NASA Astrophysics Data System (ADS)

Girard, L.; Beutel, J.; Gruber, S.; Hunziker, J.; Lim, R.; Weber, S.

2012-11-01

We present a custom acoustic emission (AE) monitoring system designed to perform long-term measurements on high-alpine rock walls. AE monitoring is a common technique for characterizing damage evolution in solid materials. The system is based on a two-channel AE sensor node (AE-node) integrated into a wireless sensor network (WSN) customized for operation in harsh environments. This wireless architecture offers flexibility in the deployment of AE-nodes at any position of the rock wall that needs to be monitored, within a range of a few hundred meters from a core station connected to the internet. The system achieves near real-time data delivery and allows the user to remotely control the AE detection threshold. In order to protect AE sensors and capture acoustic signals from specific depths of the rock wall, a special casing was developed. The monitoring system is completed by two probes that measure rock temperature and liquid water content, both probes being also integrated into the WSN. We report a first deployment of the monitoring system on a rock wall at Jungfraujoch, 3500 m a.s.l., Switzerland. While this first deployment of the monitoring system aims to support fundamental research on processes that damage rock under cold climate, the system could serve a number of other applications, including rock fall hazard surveillance or structural monitoring of concrete structures.

Retinal Ganglion Cell Damage in an Experimental Rodent Model of Blast-Mediated Traumatic Brain Injury

PubMed Central

Mohan, Kabhilan; Kecova, Helga; Hernandez-Merino, Elena; Kardon, Randy H.; Harper, Matthew M.

2013-01-01

Purpose. To evaluate retina and optic nerve damage following experimental blast injury. Methods. Healthy adult mice were exposed to an overpressure blast wave using a custom-built blast chamber. The effects of blast exposure on retina and optic nerve function and structure were evaluated using the pattern electroretinogram (pERG), spectral domain optical coherence tomography (OCT), and the chromatic pupil light reflex. Results. Assessment of the pupil response to light demonstrated decreased maximum pupil constriction diameter in blast-injured mice using red light or blue light stimuli 24 hours after injury compared with baseline in the eye exposed to direct blast injury. A decrease in the pupil light reflex was not observed chronically following blast exposure. We observed a biphasic pERG decrease with the acute injury recovering by 24 hours postblast and the chronic injury appearing at 4 months postblast injury. Furthermore, at 3 months following injury, a significant decrease in the retinal nerve fiber layer was observed using OCT compared with controls. Histologic analysis of the retina and optic nerve revealed punctate regions of reduced cellularity in the ganglion cell layer and damage to optic nerves. Additionally, a significant upregulation of proteins associated with oxidative stress was observed acutely following blast exposure compared with control mice. Conclusions. Our study demonstrates that decrements in retinal ganglion cell responses can be detected after blast injury using noninvasive functional and structural tests. These objective responses may serve as surrogate tests for higher CNS functions following traumatic brain injury that are difficult to quantify. PMID:23620426

Linking functional and relational service quality to customer satisfaction and loyalty: differences between men and women.

PubMed

Sánchez-Hernández, Rosa M; Martínez-Tur, Vicente; Peiró, José M; Moliner, Carolina

2010-04-01

This study assessed differences between men and women in the association of perceptions of service quality with customer evaluations. Functional (efficiency with which the service is delivered) and relational (customers' emotional benefits, beyond the core performance, related to the social interaction of customers with employees) dimensions of service quality were measured as well as customer satisfaction and loyalty. The sample of 277 customers (191 men, 86 women), surveyed in 29 Mexican hotels, had a mean age of 38.1 yr. (SD=9.7) for men and 34.5 yr. (SD=11.0) for women. To be eligible for survey, customers had to have spent at least one night in the hotel in question. Analysis indicated that the women and men differed in the association of functional and relational dimensions of service quality with their satisfaction and loyalty. Functional service quality was higher for the men than the women, while relational service quality showed greater predictive power for women than for men, although these accounted for only 4% of the customers' satisfaction variance and 6% of the loyalty variance.

Modeling reinforced concrete durability.

DOT National Transportation Integrated Search

2014-06-01

This project developed a next-generation modeling approach for projecting the extent of : reinforced concrete corrosion-related damage, customized for new and existing Florida Department of : Transportation bridges and suitable for adapting to broade...

Emergency Water Planning for Natural and Man-Made Emergencies: An Analytical Bibliography.

DTIC Science & Technology

1987-04-01

provide for fast recovery from disaster damages. The most frequently considered elements of such plans include (1) establishing emergency...which utilities may restrict the supply of water available to customers by manipulating the physical system: (1) pressure reduction, (2) intermittent ...shutoff, and (3) complete shutoff. Both pressure reduction and intermittent shutoff pose the risk of damages to the" system resulting from negative

Proposal for the design of a zero gravity tool storage device

NASA Technical Reports Server (NTRS)

Stuckwisch, Sue; Carrion, Carlos A.; Phillips, Lee; Laughlin, Julia; Francois, Jason

1994-01-01

Astronauts frequently use a variety of hand tools during space missions, especially on repair missions. A toolbox is needed to allow storage and retrieval of tools with minimal difficulties. The toolbox must contain tools during launch, landing, and on-orbit operations. The toolbox will be used in the Shuttle Bay and therefore must withstand the hazardous space environment. The three main functions of the toolbox in space are: to protect the tools from the space environment and from damaging one another, to allow for quick, one-handed access to the tools; and to minimize the heat transfer between the astronaut's hand and the tools. This proposal explores the primary design issues associated with the design of the toolbox. Included are the customer and design specifications, global and refined function structures, possible solution principles, concept variants, and finally design recommendations.

Custom-shaping system for bone regeneration by seeding marrow stromal cells onto a web-like biodegradable hybrid sheet.

PubMed

Tsuchiya, Kohei; Mori, Taisuke; Chen, Guoping; Ushida, Takashi; Tateishi, Tetsuya; Matsuno, Takeo; Sakamoto, Michiie; Umezawa, Akihiro

2004-05-01

New bone for the repair or the restoration of the function of traumatized, damaged, or lost bone is a major clinical need, and bone tissue engineering has been heralded as an alternative strategy for regenerating bone. A novel web-like structured biodegradable hybrid sheet has been developed for bone tissue engineering by preparing knitted poly(DL-lactic-co-glycolic acid) sheets (PLGA sheets) with collagen microsponges in their openings. The PLGA skeleton facilitates the formation of the hybrid sheets into desired shapes, and the collagen microsponges in the pores of the PLGA sheet promote cell adhesion and uniform cell distribution throughout the sheet. A large number of osteoblasts established from marrow stroma adhere to the scaffolds and generate the desired-shaped bone in combination with these novel sheets. These results indicate that the web-like structured novel sheet shows promise for use as a tool for custom-shaped bone regeneration in basic research on osteogenesis and for the development of therapeutic applications. Copyright 2004 Springer-Verlag

Sustainable and long-time 'rejuvenation' of biomimetic water-repellent silica coating on polyester fabrics induced by rough mechanical abrasion.

PubMed

Rosu, Cornelia; Lin, Haisheng; Jiang, Lu; Breedveld, Victor; Hess, Dennis W

2018-04-15

The economical use of water-repellent coatings on polymeric materials in commercial and industrial applications is limited by their mechanical wear robustness and long-term durability. In this study, we demonstrate that polyethylene terephthalate (PET) fabric modified with inorganic, methyltrimethoxysilane (MTMS)-based coatings shows excellent resistance against various types of wear damage, thereby mimicking superhydrophobic biological materials. These features were facilitated by the rational design of coating processing that also enabled tunable hierarchical surface structure. A series of custom and standard testing protocols revealed that coating-to-substrate adhesion was remarkably high, as was the resistance to various mechanical abradents. The most intriguing characteristic observed during aging and abrasion cycles was the enhancement in non-wettability or 'rejuvenation' reflected by water droplet roll-off behavior, a characteristic of self-cleaning materials. Water-repellent properties of coated polyester were also enhanced by prolonged thermal annealing and were maintained after custom laundry. The developed technology offers opportunities to design low cost, durable and functional textiles for both indoor and outdoor applications. Copyright © 2018 Elsevier Inc. All rights reserved.

Breaking the trade-off between efficiency and service.

PubMed

Frei, Frances X

2006-11-01

For manufacturers, customers are the open wallets at the end of the supply chain. But for most service businesses, they are key inputs to the production process. Customers introduce tremendous variability to that process, but they also complain about any lack of consistency and don't care about the company's profit agenda. Managing customer-introduced variability, the author argues, is a central challenge for service companies. The first step is to diagnose which type of variability is causing mischief: Customers may arrive at different times, request different kinds of service, possess different capabilities, make varying degrees of effort, and have different personal preferences. Should companies accommodate variability or reduce it? Accommodation often involves asking employees to compensate for the variations among customers--a potentially costly solution. Reduction often means offering a limited menu of options, which may drive customers away. Some companies have learned to deal with customer-introduced variability without damaging either their operating environments or customers' service experiences. Starbucks, for example, handles capability variability among its customers by teaching them the correct ordering protocol. Dell deals with arrival and request variability in its high-end server business by outsourcing customer service while staying in close touch with customers to discuss their needs and assess their experiences with third-party providers. The effective management of variability often requires a company to influence customers' behavior. Managers attempting that kind of intervention can follow a three-step process: diagnosing the behavioral problem, designing an operating role for customers that creates new value for both parties, and testing and refining approaches for influencing behavior.

Improving Structural and Functional Agreement in Patients with Glaucoma by Using Customized Perimetric Locations and Images of the Retinal Nerve Fiber Bundles

NASA Astrophysics Data System (ADS)

Alluwimi, Muhammed Saad

Glaucoma is the second leading cause of the blindness worldwide. It is a group of chronic, progressive, and potentially blinding optic neuropathies characterized by abnormalities of the optic nerve head and/or retinal nerve fiber layer (RNFL) associated with visual field abnormality. When diagnosing and managing patients with glaucoma, clinicians evaluate the agreement between structural and functional measures. However, it has been widely recognized that there is often a discordance between structural and functional (e.g., perimetry) measures in glaucoma, posing a challenge for clinicians to make their decisions. As explained in the literature, this discordance may relate to high normal between-subject variation, insufficient knowledge of the RNFL bundle organization, sparse spacing of the perimetric locations used to measure the functional performance of ganglion cells, high test-retest variation for the most commonly used stimulus for perimetry, and poor perimetric sampling of the macula. The aim of this thesis was to overcome this discordance by conducting three experiments: First, asymmetry analysis was used to reduce between-subject variation of the macular thickness and ganglion cell thickness measurements with OCT. This variation was decreased at particular regions of the macula. Outside the macula, the variation remained high leading to the second experiment in which customized closely-spaced perimetric locations were presented at wedge defects, guided by the OCT en face images of the RNFL bundles. A rapid suprathreshold perimetric strategy was used and perimetric defect was, in most cases, in correspondence with the structural defect. To threshold perimetric defects, an elongated blur-resistant stimulus was oriented within damaged RNFL bundles. It was found that contrast sensitivities were below the 95% normal limit in 37 of 44 locations. The latter experiment focused on wedge defects outside the macula, which led to the third experiment in which the goal was to investigate the feasibility of a basis to individualize perimetric locations within the macula guided by structural damage seen on OCT en face images. In preliminary data, it was feasible to individualize perimetric locations within the macula. In this thesis, the agreement between structural and functional measures was improved in glaucoma, by developing methods and techniques that provided a framework to help overcome challenges in clinical decision making.

Customized acoustic transform functions and their accuracy at predicting real-ear hearing aid performance.

PubMed

Munro, K J; Hatton, N

2000-02-01

The purpose of the study was to evaluate the validity of predicting the real-ear aided response by adding customized acoustic transform functions to the performance of a hearing aid in a 2-cc coupler. The real-ear hearing aid response, the real-ear-to-coupler difference (RECD/HA2), and field to behind-the-ear microphone transfer functions were measured in both ears of 24 normally hearing subjects using probe-tube microphone equipment. The RECD/HA2 transform function was obtained using both insert earphones and with the hearing aid/ pressure comparison method. An RECD/HA2 transfer function was also obtained with a customized earmold, ER-3A foam tip, and an oto-admittance tip. Validity estimates were calculated as the difference between the derived and measured real-ear response. The derived response was generally within 5 dB of the measured real-ear response when it incorporated an RECD/HA2 transform function obtained with a customized earmold for the specific ear in question. Discrepancies increased when the RECD/HA2 transfer function was obtained from the same subject but the opposite ear. There were significant differences between the RECD/HA2 transform function obtained with customized and temporary earmolds. As a result, the derived response incorporating these transforms differed significantly from the measured real-ear response obtained with the customized earmold. The insert earphone and the hearing aid RECD/HA2 transfer function were equally valid. The derived response may be used as a substitute for in situ hearing aid response procedures when it incorporates acoustic transform functions obtained with a customized earmold from the specific ear in question.

Optimized heterologous transfection of viable adult organotypic brain slices using an enhanced gene gun

PubMed Central

2013-01-01

Background Organotypic brain slices (OTBS) are an excellent experimental compromise between the facility of working with cell cultures and the biological relevance of using animal models where anatomical, morphological, and cellular function of specific brain regions can be maintained. The biological characteristics of OTBS can subsequently be examined under well-defined conditions. They do, however, have a number of limitations; most brain slices are derived from neonatal animals, as it is difficult to properly prepare and maintain adult OTBS. There are ample problems with tissue integrity as OTBS are delicate and frequently become damaged during the preparative stages. Notwithstanding these obstacles, the introduced exogenous proteins into both neuronal cells, and cells imbedded within tissues, have been consistently difficult to achieve. Results Following the ex vivo extraction of adult mouse brains, mounted inside a medium-agarose matrix, we have exploited a precise slicing procedure using a custom built vibroslicer. To transfect these slices we used an improved biolistic transfection method using a custom made low-pressure barrel and novel DNA-coated nanoparticles (40 nm), which are drastically smaller than traditional microparticles. These nanoparticles also minimize tissue damage as seen by a significant reduction in lactate dehydrogenase activity as well as propidium iodide (PI) and dUTP labelling compared to larger traditional gold particles used on these OTBS. Furthermore, following EYFP exogene delivery by gene gun, the 40 nm treated OTBS displayed a significantly larger number of viable NeuN and EYFP positive cells. These OTBS expressed the exogenous proteins for many weeks. Conclusions Our described methodology of producing OTBS, which results in better reproducibility with less tissue damage, permits the exploitation of mature fully formed adult brains for advanced neurobiological studies. The novel 40 nm particles are ideal for the viable biolistic transfection of OTBS by reducing tissue stress while maintaining long term exogene expression. PMID:24354851

Damage Detection Sensor System for Aerospace and Multiple Applications

NASA Technical Reports Server (NTRS)

Williams, M.; Lewis, M.; Gibson, T.; Medelius, P.; Lane, J.

2017-01-01

The damage detection sensory system is an intelligent damage detection ‘skin’ that can be embedded into rigid or flexible structures, providing a lightweight capability for in-situ health monitoring for applications such as spacecraft, expandable or inflatable structures, extravehicular activities (EVA) suits, smart wearables, and other applications where diagnostic impact damage monitoring might be critical. The sensor systems can be customized for detecting location, damage size, and depth, with velocity options and can be designed for particular environments for monitoring of impact or physical damage to a structure. The operation of the sensor detection system is currently based on the use of parallel conductive traces placed on a firm or flexible surface. Several detection layers can be implemented, where alternate layers are arranged in orthogonal direction with respect to the adjacent layers allowing for location and depth calculations. Increased flexibility of the damage detection sensor system designs will also be introduced.

A customer's definition of quality.

PubMed

Miller, T O

1992-01-01

What's the best way to get "close to the customer"? One company has developed a customer feedback system to drive product design, sales, service, and support functions in order to ensure better customer responsiveness.

The prion-like domain of FUS is multiphosphorylated following DNA damage without altering nuclear localization.

PubMed

Rhoads, Shannon N; Monahan, Zachary T; Yee, Debra S; Leung, Andrew Y; Newcombe, Cameron G; O'Meally, Robert N; Cole, Robert N; Shewmaker, Frank P

2018-06-13

FUS is an abundant, predominantly nuclear protein involved in RNA processing. Under various conditions, FUS functionally associates with RNA and other macromolecules to form distinct, reversible phase-separated liquid structures. Persistence of the phase-separated state and increased cytoplasmic localization are both hypothesized to predispose FUS to irreversible aggregation, which is a pathological hallmark of subtypes of amyotrophic lateral sclerosis and frontotemporal dementia. We previously showed that phosphorylation of FUS's prion-like domain suppressed phase separation and toxic aggregation, proportionally to the number of added phosphates. However, phosphorylation of FUS's prion-like domain was previously reported to promote its cytoplasmic localization, potentially favoring pathological behavior. Here, we used mass spectrometry and human cell models to further identify phosphorylation sites within FUS's prion-like domain, specifically following DNA-damaging stress. In total, 28 putative sites have been identified, about half of which are DNA-dependent protein kinase (DNA-PK) consensus sites. Custom antibodies were developed to confirm the phosphorylation of two of these sites (Ser26 and Ser30). Both sites were usually phosphorylated in a sub-population of cellular FUS following a variety of DNA-damaging stresses, but not necessarily equally or simultaneously. Importantly, we found DNA-PK-dependent multi-phosphorylation of FUS's prion-like domain does not cause cytoplasmic localization.

[Aspects of post-tramatic stress disorder after a traffic acident].

PubMed

Noll-Hussong, M; Herberger, S; Grauer, M T; Otti, A; Gündel, H

2013-09-01

Post-traumatic stress disorder (PTSD) occurs most frequently in the general population after traffic accidents and affects up to 15 % of those involved. Mental and physical comorbidity, preliminary damage or injury can herald the development of PTSD, but the scope of social support after the accident plays a crucial role in whether and to what extent potential PTSD develops. Against this background, preventive and injury reduction aspects of the interaction between insurance companies and their customers are conceivable, which could also positively affect health economic and aspects of job or customer satisfaction.

Research on Capturing of Customer Requirements Based on Innovation Theory

NASA Astrophysics Data System (ADS)

junwu, Ding; dongtao, Yang; zhenqiang, Bao

To exactly and effectively capture customer requirements information, a new customer requirements capturing modeling method was proposed. Based on the analysis of function requirement models of previous products and the application of technology system evolution laws of the Theory of Innovative Problem Solving (TRIZ), the customer requirements could be evolved from existing product designs, through modifying the functional requirement unit and confirming the direction of evolution design. Finally, a case study was provided to illustrate the feasibility of the proposed approach.

Separating Visuospatial from Visuomotor Coordination in Skill Estimation in Learning Disabled Children: The Eta-Mu Model.

PubMed

Aleci, Carlo; Piccoli, Marzia; Melotti, Valentina; Melis, Elena; Canavese, Lorenzo

2017-12-01

Purpose A model aimed at detecting the proportion of visuoperceptive and visuomotor coordination impairment in children with ascertained or suspected learning disability is described. The final purpose is to provide customized rehabilitation programs. Methods In this pilot study, four children (8-9 years) were administered a set of standardized tests to evaluate their ability to perform visuoperceptive and visuomotor tasks. Depending on the individual outcomes, two indexes have been computed from the resulting z-scores: η (Eta) that quantifies the visuoperceptive impairment, and μ (Mu) that expresses the alteration in visuomotor coordination. Results A condition of abnormality was evident in each patient: Subjects 1 and 3 suffered mainly from a visuoperceptive alteration (η higher than expected), while Subject 4 had reduced visuomotor coordination (μ higher than expected). Subject 2 showed balanced visuoperceptive and visuomotor impairment. Based on the obtained η and μ values, each child underwent a customized rehabilitation treatment, then they were examined again. At re-test, η or μ turned balanced and z-scores improved in the four patients. Conclusions The Eta/Mu model is effective in detecting the type of damage by quantifying the share of visuoperceptive and visuomotor coordination involvement in dyslexic children, allowing a customized rehabilitative approach. Such an approach, focused on treating the function found to be defective, appears to be effective in rebalancing individual visuomotor and visuoperceptive skills; it should, therefore, be taken into consideration when updating the rehabilitation plans of learning disabled children.

C&RE-SLC: Database for conservation and renewable energy activities

NASA Astrophysics Data System (ADS)

Cavallo, J. D.; Tompkins, M. M.; Fisher, A. G.

1992-08-01

The Western Area Power Administration (Western) requires all its long-term power customers to implement programs that promote the conservation of electric energy or facilitate the use of renewable energy resources. The hope is that these measures could significantly reduce the amount of environmental damage associated with electricity production. As part of preparing the environmental impact statement for Western's Electric Power Marketing Program, Argonne National Laboratory constructed a database of the conservation and renewable energy activities in which Western's Salt Lake City customers are involved. The database provides information on types of conservation and renewable energy activities and allows for comparisons of activities being conducted at different utilities in the Salt Lake City region. Sorting the database allows Western's Salt Lake City customers to be classified so the various activities offered by different classes of utilities can be identified; for example, comparisons can be made between municipal utilities and cooperatives or between large and small customers. The information included in the database was collected from customer planning documents in the files of Western's Salt Lake City office.

[A cross-level analysis of the links between service quality and disconfirmation of expectations and customer satisfaction].

PubMed

Sánchez-Hernández, Rosa M; Martínez-Tur, Vicente; González-Morales, M Gloria; Ramos, José; Peiró, José M

2009-08-01

This article examines links between disconfirmation of expectations and functional and relational service quality perceived by employees and customer satisfaction. A total of 156 employees, who were working in 52 work units, participated in the research study. In addition, 517 customers who were assisted by these work units were surveyed. Using a cross-level approach, we used a random coefficient model to test the aforementioned relationships. A strong relationship between disconfirmation of expectations and customer satisfaction was observed. Also, the results confirmed that functional service quality maintains an additional and significant association with customer satisfaction. In contrast, there were no significant relationships between relational service quality and customer satisfaction. The article concludes with a discussion of these results.

Nuclease-mediated genome editing: At the front-line of functional genomics technology.

PubMed

Sakuma, Tetsushi; Woltjen, Knut

2014-01-01

Genome editing with engineered endonucleases is rapidly becoming a staple method in developmental biology studies. Engineered nucleases permit random or designed genomic modification at precise loci through the stimulation of endogenous double-strand break repair. Homology-directed repair following targeted DNA damage is mediated by co-introduction of a custom repair template, allowing the derivation of knock-out and knock-in alleles in animal models previously refractory to classic gene targeting procedures. Currently there are three main types of customizable site-specific nucleases delineated by the source mechanism of DNA binding that guides nuclease activity to a genomic target: zinc-finger nucleases (ZFNs), transcription activator-like effector nucleases (TALENs), and clustered regularly interspaced short palindromic repeats (CRISPR). Among these genome engineering tools, characteristics such as the ease of design and construction, mechanism of inducing DNA damage, and DNA sequence specificity all differ, making their application complementary. By understanding the advantages and disadvantages of each method, one may make the best choice for their particular purpose. © 2014 The Authors Development, Growth & Differentiation © 2014 Japanese Society of Developmental Biologists.

ERCC1 function in nuclear excision and interstrand crosslink repair pathways is mediated exclusively by the ERCC1-202 isoform

PubMed Central

Friboulet, Luc; Postel-Vinay, Sophie; Sourisseau, Tony; Adam, Julien; Stoclin, Annabelle; Ponsonnailles, Florence; Dorvault, Nicolas; Commo, Frédéric; Saulnier, Patrick; Salome-Desmoulez, Sophie; Pottier, Géraldine; André, Fabrice; Kroemer, Guido; Soria, Jean Charles; Olaussen, Ken André

2013-01-01

ERCC1 (excision repair cross-complementation group 1) plays essential roles in the removal of DNA intrastrand crosslinks by nucleotide excision repair, and that of DNA interstrand crosslinks by the Fanconi anemia (FA) pathway and homology-directed repair processes (HDR). The function of ERCC1 thus impacts on the DNA damage response (DDR), particularly in anticancer therapy when DNA damaging agents are employed. ERCC1 expression has been proposed as a predictive biomarker of the response to platinum-based therapy. However, the assessment of ERCC1 expression in clinical samples is complicated by the existence of 4 functionally distinct protein isoforms, which differently impact on DDR. Here, we explored the functional competence of each ERCC1 protein isoform and obtained evidence that the 202 isoform is the sole one endowed with ERCC1 activity in DNA repair pathways. The ERCC1 isoform 202 interacts with RPA, XPA, and XPF, and XPF stability requires expression of the ERCC1 202 isoform (but none of the 3 others). ERCC1-deficient non-small cell lung cancer cells show abnormal mitosis, a phenotype reminiscent of the FA phenotype that can be rescued by isoform 202 only. Finally, we could not observe any dominant-negative interaction between ERCC1 isoforms. These data suggest that the selective assessment of the ERCC1 isoform 202 in clinical samples should accurately reflect the DDR-related activity of the gene and hence constitute a useful biomarker for customizing anticancer therapies. PMID:24036546

Method for matching customer and manufacturer positions for metal product parameters standardization

NASA Astrophysics Data System (ADS)

Polyakova, Marina; Rubin, Gennadij; Danilova, Yulija

2018-04-01

Decision making is the main stage of regulation the relations between customer and manufacturer during the design the demands of norms in standards. It is necessary to match the positions of the negotiating sides in order to gain the consensus. In order to take into consideration the differences of customer and manufacturer estimation of the object under standardization process it is obvious to use special methods of analysis. It is proposed to establish relationships between product properties and its functions using functional-target analysis. The special feature of this type of functional analysis is the consideration of the research object functions and properties. It is shown on the example of hexagonal head crew the possibility to establish links between its functions and properties. Such approach allows obtaining a quantitative assessment of the closeness the positions of customer and manufacturer at decision making during the standard norms establishment.

Knowing what to sell, when, and to whom.

PubMed

Kumar, V; Venkatesan, Rajkumar; Reinartz, Werner

2006-03-01

Despite an abundance of data, most companies do a poor job of predicting the behavior of their customers. In fact, the authors' research suggests that even companies that take the greatest trouble over their predictions about whether a particular customer will buy a particular product are correct only around 55% of the time--a result that hardly justifies the costs of having a CRM system in the first place. Businesses usually conclude from studies like this that it's impossible to use the past to predict the future, so they revert to the timeworn marketing practice of inundating their customers with offers. But as the authors explain, the reason for the poor predictions is not any basic limitation of CRM systems or the predictive power of past behavior, but rather of the mathematical methods that companies use to interpret the data. The authors have developed a new way of predicting customer behavior, based on the work of the Nobel Prize-winning economist Daniel McFadden, that delivers vastly improved results. Indeed, the methodology increases the odds of successfully predicting a specific purchase by a specific customer at a specific time to about 85%, a number that will have a major impact on any company's marketing ROI. What's more, using this methodology, companies can increase revenues while reducing their frequency of customer contact-evidence that overcommunication with customers may actually damage a company's sales.

Contracting Deployment Customer Guide.

DTIC Science & Technology

1996-12-01

functional managers from the major commands expressed the need to develop a Customer Guide for contingency deployments which would standardize, simplify, and...streamline the support our Contingency Contracting Officers (CCOs) provide to our customers .

COPPER PITTING CORROSION: A CASE STUDY

EPA Science Inventory

Localized or pitting corrosion of copper pipes used in household drinking-water plumbing is a problem for many water utilities and their customers. Extreme attack can lead to pinhole water leaks that may result in water damage, mold growth, and costly repairs. Water quality has b...

Listening to the Customer: Implementing Quality Function Deployment.

ERIC Educational Resources Information Center

Schauerman, Sam; And Others

1994-01-01

Describes Yoji Akao's concept of quality function development (QFD), a strategic tool that translates the customers' quality requirements into organizational language. Examines how El Camino College's (California) application of QFD matches constituent needs to college functions. Includes an 11-item bibliography and lists El Camino College's…

Damage Detection Sensor System for Aerospace and Multiple Applications

NASA Technical Reports Server (NTRS)

Williams, Martha; Lewis, Mark; Gibson, Tracy L.; Lane, John; Medelius, Pedro

2017-01-01

NASA has identified structural health monitoring and damage detection and verification as critical needs in multiple technology roadmaps. The sensor systems can be customized for detecting location, damage size, and depth, with velocity options and can be designed for particular environments for monitoring of impact or physical damage to a structure. The damage detection system has been successfully demonstrated in a harsh environment and remote integration tested over 1000 miles apart. Multiple applications includes: Spacecraft and Aircraft; Inflatable, Deployable and Expandable Structures; Space Debris Monitoring; Space Habitats; Military Shelters; Solar Arrays, Smart Garments and Wearables, Extravehicular activity (EVA) suits; Critical Hardware Enclosures; Embedded Composite Structures; and Flexible Hybrid Printed Electronics and Systems. For better implementation and infusion into more flexible architectures, important and improved designs in advancing embedded software and GUI interface, and increasing flexibility, modularity, and configurable capabilities of the system are currently being carried out.

Shock-loading response of advanced materials

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gray, G.T. III

1993-08-01

Advanced materials, such as composites (metal, ceramic, or polymer-matrix), intermetallics, foams (metallic or polymeric-based), laminated materials, and nanostructured materials are receiving increasing attention because their properties can be custom tailored specific applications. The high-rate/impact response of advanced materials is relevant to a broad range of service environments such as the crashworthiness of civilian/military vehicles, foreign-object-damage in aerospace, and light-weight armor. Increased utilization of these material classes under dynamic loading conditions requires an understanding of the relationship between high-rate/shock-wave response as a function of microstructure if we are to develop models to predict material behavior. In this paper the issues relevantmore » to defect generation, storage, and the underlying physical basis needed in predictive models for several advanced materials will be reviewed.« less

Kernel User’s Manual Version 1.0

DTIC Science & Technology

1989-02-01

especially on distributed systems. There are issues concerning functionality (amply documented in [ARTEWG 86b), customization , tool support (especially...a far lower level, including special device drivers, special message or signaling systems, and even a custom executive. There is far less general...functionality; the implementors of the language do not know how to satisfy the variety of needs of real-time applications; the vendors are unable to customize

Wrapping the COTS Dilemma

DTIC Science & Technology

2000-12-01

security services for its transactions, notably e-commerce both business to customer (B2C) and business to business ( B2B ). Already the e4: Wrapping...is cos-oms s the continuity of its function in replacement" cost-competitiveness products? "• customer expectation of quality * are the implications...of new functionality on previous "* customer tolerance to shortfalls in quality assurances "* lifetime in the marketplace "* commercial through-life

41 CFR 102-85.205 - What happens if a customer agency continues occupancy after the expiration of an OA?

Code of Federal Regulations, 2014 CFR

2014-01-01

... Responsibilities in the Event of Tenant Delay in Vacating Space In leased space In federally owned space To pay... described in this part, and those added costs to GSA (claims, damages, changes, etc.) resulting from the...

41 CFR 102-85.205 - What happens if a customer agency continues occupancy after the expiration of an OA?

Code of Federal Regulations, 2012 CFR

2012-01-01

... Responsibilities in the Event of Tenant Delay in Vacating Space In leased space In federally owned space To pay... described in this part, and those added costs to GSA (claims, damages, changes, etc.) resulting from the...

41 CFR 102-85.205 - What happens if a customer agency continues occupancy after the expiration of an OA?

Code of Federal Regulations, 2013 CFR

2013-07-01

... Responsibilities in the Event of Tenant Delay in Vacating Space In leased space In federally owned space To pay... described in this part, and those added costs to GSA (claims, damages, changes, etc.) resulting from the...

COPPER PITTING CORROSION AND PINHOLE LEAKS: A CASE STUDY

EPA Science Inventory

Localized corrosion, or "pitting", of copper drinking water pipe continues is a problem for many water utilities and their customers. Extreme attack leads to pinhole leaks that can potentially lead to water damage, mold growth, and costly repairs for the homeowners, as well as th...

Understanding customer experience.

PubMed

Meyer, Christopher; Schwager, Andre

2007-02-01

Anyone who has signed up for cell phone service, attempted to claim a rebate, or navigated a call center has probably suffered from a company's apparent indifference to what should be its first concern: the customer experiences that culminate in either satisfaction or disappointment and defection. Customer experience is the subjective response customers have to direct or indirect contact with a company. It encompasses every aspect of an offering: customer care, advertising, packaging, features, ease of use, reliability. Customer experience is shaped by customers' expectations, which largely reflect previous experiences. Few CEOs would argue against the significance of customer experience or against measuring and analyzing it. But many don't appreciate how those activities differ from CRM or just how illuminating the data can be. For instance, the majority of the companies in a recent survey believed they have been providing "superior" experiences to customers, but most customers disagreed. The authors describe a customer experience management (CEM) process that involves three kinds of monitoring: past patterns (evaluating completed transactions), present patterns (tracking current relationships), and potential patterns (conducting inquiries in the hope of unveiling future opportunities). Data are collected at or about touch points through such methods as surveys, interviews, focus groups, and online forums. Companies need to involve every function in the effort, not just a single customer-facing group. The authors go on to illustrate how a cross-functional CEM system is created. With such a system, companies can discover which customers are prospects for growth and which require immediate intervention.

Applying Mass Customization Concepts to Core Courses: Increasing Student-Centered Customization and Enabling Cross-Functional Integration

ERIC Educational Resources Information Center

Wilson, Darryl D.

2011-01-01

This conceptual paper suggests a methodology for increasing student satisfaction in core courses by applying the principle of mass customization to increase student satisfaction. It proposes that customization can be increased by increasing course flexibility along three dimensions: content flexibility, schedule flexibility, and course length…

Hurricane preparedness: Current procedures at Blue Cross Blue Shield of Florida.

PubMed

Devaney, Everett

2008-01-01

This paper discusses experience, methodology and recommendations for successful business continuity and disaster recovery planning for health care organisations. Hurricanes, tornadoes and other natural disasters are a regular occurrence in Florida. Low-lying coastal areas are at increased risk, with populations in inland areas as far as 200-300 miles with potential to suffer heavy damage. This case study shows how one institution, Blue Cross Blue Shield of Florida, provides and maintains emergency response plans for critical functions, services or processes before, during and after a disaster, in support of its 8.3 million customers, its stakeholders and colleagues such as providers and vendors. Even though modern tracking gives fair warning regarding hurricanes, the use of specific and tested emergency response planning is critical to allow business continuity decision-making well before disaster strikes. This study examines how functional units within a health care organisation can plan and prepare to protect the public who depend on their services and resources, as well as minimise the risk to employees and business stakeholders. Coordination of a Contingency Response Team (within the functional units) and an Enterprise Operations Centre must be well managed to minimise adverse customer service disruptions and at the same time minimise impact to the company. Decision making and communications are strictly organised to protect stakeholders, make temporary business rule changes, allow for alternative business processes and handle benefit decisions, following methodology known, tested and used in past scenarios. In summary, the paper explores key points to achieve active and engaged business continuity in the face of natural disasters - (1) planning & coordination, (2) monitoring, (3) response/activation and (4) recovery.

Pitting Corrosion of Copper in Waters with High pH and Low Alkalinity

EPA Science Inventory

Localized or pitting corrosion of copper pipes used in household drinking-water plumbing is a problem for many water utilities and their customers. Extreme attack can lead to pinhole water leaks that may result in water damage, mold growth, and costly repairs. Water quality has b...

Disaster Response and Planning for Libraries.

ERIC Educational Resources Information Center

Kahn, Miriam B.

Providing a customized disaster response plan to assist libraries in quick recovery, this resource also outlines step to minimize damage and protect materials before trouble strikes. The first section of the book, "Response," contains information how to handle small jobs in-house and suggestions for working with contractors--with an…

39 CFR 281.1 - Notification of firm mailers.

Code of Federal Regulations, 2010 CFR

2010-07-01

... customer services at the office of mailing to give known mailers timely notification of the incident and... 39 Postal Service 1 2010-07-01 2010-07-01 false Notification of firm mailers. 281.1 Section 281.1 Postal Service UNITED STATES POSTAL SERVICE ORGANIZATION AND ADMINISTRATION FIRM MAILINGS DAMAGED OR...

14 CFR 1214.113 - Allocation of risk.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false Allocation of risk. 1214.113 Section 1214.113 Aeronautics and Space NATIONAL AERONAUTICS AND SPACE ADMINISTRATION SPACE FLIGHT General....113 Allocation of risk. The U.S. Government will assume no risk for damages to the customer resulting...

Vascular Repair by Circumferential Cell Therapy Using Magnetic Nanoparticles and Tailored Magnets.

PubMed

Vosen, Sarah; Rieck, Sarah; Heidsieck, Alexandra; Mykhaylyk, Olga; Zimmermann, Katrin; Bloch, Wilhelm; Eberbeck, Dietmar; Plank, Christian; Gleich, Bernhard; Pfeifer, Alexander; Fleischmann, Bernd K; Wenzel, Daniela

2016-01-26

Cardiovascular disease is often caused by endothelial cell (EC) dysfunction and atherosclerotic plaque formation at predilection sites. Also surgical procedures of plaque removal cause irreversible damage to the EC layer, inducing impairment of vascular function and restenosis. In the current study we have examined a potentially curative approach by radially symmetric re-endothelialization of vessels after their mechanical denudation. For this purpose a combination of nanotechnology with gene and cell therapy was applied to site-specifically re-endothelialize and restore vascular function. We have used complexes of lentiviral vectors and magnetic nanoparticles (MNPs) to overexpress the vasoprotective gene endothelial nitric oxide synthase (eNOS) in ECs. The MNP-loaded and eNOS-overexpressing cells were magnetic, and by magnetic fields they could be positioned at the vascular wall in a radially symmetric fashion even under flow conditions. We demonstrate that the treated vessels displayed enhanced eNOS expression and activity. Moreover, isometric force measurements revealed that EC replacement with eNOS-overexpressing cells restored endothelial function after vascular injury in eNOS(-/-) mice ex and in vivo. Thus, the combination of MNP-based gene and cell therapy with custom-made magnetic fields enables circumferential re-endothelialization of vessels and improvement of vascular function.

Business Cases for Microgrids: Modeling Interactions of Technology Choice, Reliability, Cost, and Benefit

NASA Astrophysics Data System (ADS)

Hanna, Ryan

Distributed energy resources (DERs), and increasingly microgrids, are becoming an integral part of modern distribution systems. Interest in microgrids--which are insular and autonomous power networks embedded within the bulk grid--stems largely from the vast array of flexibilities and benefits they can offer stakeholders. Managed well, they can improve grid reliability and resiliency, increase end-use energy efficiency by coupling electric and thermal loads, reduce transmission losses by generating power locally, and may reduce system-wide emissions, among many others. Whether these public benefits are realized, however, depends on whether private firms see a "business case", or private value, in investing. To this end, firms need models that evaluate costs, benefits, risks, and assumptions that underlie decisions to invest. The objectives of this dissertation are to assess the business case for microgrids that provide what industry analysts forecast as two primary drivers of market growth--that of providing energy services (similar to an electric utility) as well as reliability service to customers within. Prototypical first adopters are modeled--using an existing model to analyze energy services and a new model that couples that analysis with one of reliability--to explore interactions between technology choice, reliability, costs, and benefits. The new model has a bi-level hierarchy; it uses heuristic optimization to select and size DERs and analytical optimization to schedule them. It further embeds Monte Carlo simulation to evaluate reliability as well as regression models for customer damage functions to monetize reliability. It provides least-cost microgrid configurations for utility customers who seek to reduce interruption and operating costs. Lastly, the model is used to explore the impact of such adoption on system-wide greenhouse gas emissions in California. Results indicate that there are, at present, co-benefits for emissions reductions when customers adopt and operate microgrids for private benefit, though future analysis is needed as the bulk grid continues to transition toward a less carbon intensive system.

Customer-perpetrated work-related violence: prevalence and trends in Britain.

PubMed

Edwards, J A; Buckley, P

2016-10-01

Incidents of work-related violence (WRV) have increased over the years. These can be damaging to both individual psychological well-being and organizational performance. To examine the prevalence and causes of customer-perpetrated WRV in Britain over a 12 year period. Demographic, work and perpetrator's personality characteristics were examined as predictors of WRV. Data from the Crime Survey of England and Wales (CSEW) across 2001-13 were filtered specifically to explore responses from victims of customer-perpetrated crime within the working population. On average, 22% of all violent crimes committed by customers occurred in the workplace. Further analysis showed that differences in gender, age as well as managerial/supervisory duties, working hours, employment status, organizational size and occupation were significantly related to incidents of WRV. Perpetrators' personality characteristics were also perceived as predictors of WRV. This paper provides an alternative approach for reporting customer-perpetrated WRV. Violence at work is considered a widespread problem within the organizational studies literature, which can lead to a variety of stress-related symptoms in affected workers. Based on the current study's findings, a theoretical model is proposed to help combat customer-perpetrated WRV, and as a basis for future research. © The Author 2016. Published by Oxford University Press on behalf of the Society of Occupational Medicine. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

78 FR 66039 - Modification of National Customs Automation Program Test Concerning Automated Commercial...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-04

... Customs Automation Program Test Concerning Automated Commercial Environment (ACE) Cargo Release (Formerly... Simplified Entry functionality in the Automated Commercial Environment (ACE). Originally, the test was known...) test concerning Automated Commercial Environment (ACE) Simplified Entry (SE test) functionality is...

39 CFR 221.6 - Field organization.

Code of Federal Regulations, 2014 CFR

2014-07-01

...). (d) Customer Service District Offices. Functional units and reporting relationships are as follows: (1) Functional units. The 80 district offices coordinate the day-to-day management of post offices... units. Areas are responsible for: (i) Customer service districts (CSDs). (ii) Post offices (POs). (iii...

39 CFR 221.6 - Field organization.

Code of Federal Regulations, 2012 CFR

2012-07-01

...). (d) Customer Service District Offices. Functional units and reporting relationships are as follows: (1) Functional units. The 80 district offices coordinate the day-to-day management of post offices... units. Areas are responsible for: (i) Customer service districts (CSDs). (ii) Post offices (POs). (iii...

39 CFR 221.6 - Field organization.

Code of Federal Regulations, 2013 CFR

2013-07-01

...). (d) Customer Service District Offices. Functional units and reporting relationships are as follows: (1) Functional units. The 80 district offices coordinate the day-to-day management of post offices... units. Areas are responsible for: (i) Customer service districts (CSDs). (ii) Post offices (POs). (iii...

Intranet Model and Metrics

DTIC Science & Technology

2007-02-01

organization: to add suffi- cient value for its customers to create a sustainable business model . It takes its features and functionality from the mandate...customers to create a sustainable business model . It takes its features and functionality from the mandate to operate at world-class efficiency and

Actinide Sputtering Induced by Fission with Ultra-cold Neutrons

NASA Astrophysics Data System (ADS)

Venuti, Michael; Shi, Tan; Fellers, Deion; Morris, Christopher; Makela, Mark

2017-09-01

Understanding the effects of actinide sputtering due to nuclear fission is important for a wide range of applications, including nuclear fuel storage, space science, and national defense. A new program at the Los Alamos Neutron Science Center uses ultracold neutrons (UCN) to induce fission in actinides such as uranium and plutonium. By controlling the energy of UCN, it is possible to induce fission at the sample surface within a well-defined depth. It is therefore an ideal tool for studying the effects of fission-induced sputtering as a function of interaction depth. Since the mechanism for fission-induced surface damage is not well understood, especially for samples with a surface oxide layer, this work has the potential to separate the various damage mechanisms proposed in previous works. During the irradiation with UCN, fission events are monitored by coincidence counting between prompt gamma rays using NaI detectors. Alpha spectroscopy of the ejected actinide material is performed in a custom-built ionization chamber to determine the amount of sputtered material. Actinide samples with various sample properties and surface conditions are irradiated and analyzed. In this presentation, we will discuss our experimental setup and present the preliminary results.

Effects of different seating equipment on postural control and upper extremity function in children with cerebral palsy.

PubMed

Sahinoğlu, Dilek; Coskun, Gürsoy; Bek, Nilgün

2017-02-01

Adaptive seating supports for cerebral palsy are recommended to develop and maintain optimum posture, and functional use of upper extremities. To compare the effectiveness of different seating adaptations regarding postural alignment and related functions and to investigate the effects of these seating adaptations on different motor levels. Prospective study. A total of 20 children with spastic cerebral palsy (Gross Motor Function Classification System 3-5) were included. Postural control and function (Seated Postural Control Measure, Sitting Assessment Scale) were measured in three different systems: standard chair, adjustable seating system and custom-made orthosis. In results of all participants ungrouped, there was a significant difference in most parameters of both measurement tools in favor of custom-made orthosis and adjustable seating system when compared to standard chair ( p < 0.0017). There was a difference among interventions in most of the Seated Postural Control Measure results in Level 4 when subjects were grouped according to Gross Motor Function Classification System levels. A difference was observed between standard chair and adjustable seating system in foot control, arm control, and total Sitting Assessment Scale scores; and between standard chair and custom-made orthosis in trunk control, arm control, and total Sitting Assessment Scale score in Level 4. There was no difference in adjustable seating system and custom-made orthosis in Sitting Assessment Scale in this group of children ( p < 0.017). Although custom-made orthosis fabrication is time consuming, it is still recommended since it is custom made, easy to use, and low-cost. On the other hand, the adjustable seating system can be modified according to a patient's height and weight. Clinical relevance It was found that Gross Motor Function Classification System Level 4 children benefitted most from the seating support systems. It was presented that standard chair is sufficient in providing postural alignment. Both custom-made orthosis and adjustable seating system have pros and cons and the best solution for each will be dependent on a number of factors.

Probabilistic inspection strategies for minimizing service failures

NASA Technical Reports Server (NTRS)

Brot, Abraham

1994-01-01

The INSIM computer program is described which simulates the 'limited fatigue life' environment in which aircraft structures generally operate. The use of INSIM to develop inspection strategies which aim to minimize service failures is demonstrated. Damage-tolerance methodology, inspection thresholds and customized inspections are simulated using the probability of failure as the driving parameter.

19 CFR 158.13 - Allowance for moisture and impurities.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 2 2011-04-01 2011-04-01 false Allowance for moisture and impurities. 158.13... EXPORTED Damaged or Defective Merchandise § 158.13 Allowance for moisture and impurities. (a) Application... section 507, Tariff Act of 1930, as amended (19 U.S.C. 1507), for all detectable moisture and impurities...

19 CFR 158.13 - Allowance for moisture and impurities.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 19 Customs Duties 2 2014-04-01 2014-04-01 false Allowance for moisture and impurities. 158.13... EXPORTED Damaged or Defective Merchandise § 158.13 Allowance for moisture and impurities. (a) Application... section 507, Tariff Act of 1930, as amended (19 U.S.C. 1507), for all detectable moisture and impurities...

19 CFR 158.13 - Allowance for moisture and impurities.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 19 Customs Duties 2 2012-04-01 2012-04-01 false Allowance for moisture and impurities. 158.13... EXPORTED Damaged or Defective Merchandise § 158.13 Allowance for moisture and impurities. (a) Application... section 507, Tariff Act of 1930, as amended (19 U.S.C. 1507), for all detectable moisture and impurities...

19 CFR 158.13 - Allowance for moisture and impurities.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 2 2010-04-01 2010-04-01 false Allowance for moisture and impurities. 158.13... EXPORTED Damaged or Defective Merchandise § 158.13 Allowance for moisture and impurities. (a) Application... section 507, Tariff Act of 1930, as amended (19 U.S.C. 1507), for all detectable moisture and impurities...

19 CFR 158.13 - Allowance for moisture and impurities.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 19 Customs Duties 2 2013-04-01 2013-04-01 false Allowance for moisture and impurities. 158.13... EXPORTED Damaged or Defective Merchandise § 158.13 Allowance for moisture and impurities. (a) Application... section 507, Tariff Act of 1930, as amended (19 U.S.C. 1507), for all detectable moisture and impurities...

Estimating the Benefits of the Air Force Purchasing and Supply Chain Management Initiative

DTIC Science & Technology

2008-01-01

sector, known as strategic sourcing.6 The Customer Relationship Management initiative ( CRM ) pro- vides a single customer point of contact for all... Customer Relationship Management initiative. commodity council A term used to describe a cross-functional sourc- ing group charged with formulating a...initiative has four major components, all based on commercial best practices (Gabreski, 2004): commodity councils customer relationship management

Customized a Ti6Al4V Bone Plate for Complex Pelvic Fracture by Selective Laser Melting.

PubMed

Wang, Di; Wang, Yimeng; Wu, Shibiao; Lin, Hui; Yang, Yongqiang; Fan, Shicai; Gu, Cheng; Wang, Jianhua; Song, Changhui

2017-01-04

In pelvic fracture operations, bone plate shaping is challenging and the operation time is long. To address this issue, a customized bone plate was designed and produced using selective laser melting (SLM) technology. The key steps of this study included designing the customized bone plate, metal 3D printing, vacuum heat treatment, surface post-processing, operation rehearsal, and clinical application and evaluation. The joint surface of the bone plate was placed upwards with respect to the build platform to keep it away from the support and to improve the quality of the joint surface. Heat conduction was enhanced by adding a cone-type support beneath the bone plate to prevent low-quality fabrication due to poor heat conductivity of the Ti-6Al-4V powder. The residual stress was eliminated by exposing the SLM-fabricated titanium-alloy bone plate to a vacuum heat treatment. Results indicated that the bone plate has a hardness of HV1 360-HV1 390, an ultimate tensile strength of 1000-1100 MPa, yield strength of 900-950 MPa, and an elongation of 8%-10%. Pre-operative experiments and operation rehearsal were performed using the customized bone plate and the ABC-made pelvic model. Finally, the customized bone plate was clinically applied. The intraoperative C-arm and postoperative X-ray imaging results indicated that the customized bone plate matched well to the damaged pelvis. The customized bone plate fixed the broken bone and guides pelvis restoration while reducing operation time to about two hours. The customized bone plate eliminated the need for preoperative titanium plate pre-bending, thereby greatly reducing surgical wounds and operation time.

Customized a Ti6Al4V Bone Plate for Complex Pelvic Fracture by Selective Laser Melting

PubMed Central

Wang, Di; Wang, Yimeng; Wu, Shibiao; Lin, Hui; Yang, Yongqiang; Fan, Shicai; Gu, Cheng; Wang, Jianhua; Song, Changhui

2017-01-01

In pelvic fracture operations, bone plate shaping is challenging and the operation time is long. To address this issue, a customized bone plate was designed and produced using selective laser melting (SLM) technology. The key steps of this study included designing the customized bone plate, metal 3D printing, vacuum heat treatment, surface post-processing, operation rehearsal, and clinical application and evaluation. The joint surface of the bone plate was placed upwards with respect to the build platform to keep it away from the support and to improve the quality of the joint surface. Heat conduction was enhanced by adding a cone-type support beneath the bone plate to prevent low-quality fabrication due to poor heat conductivity of the Ti-6Al-4V powder. The residual stress was eliminated by exposing the SLM-fabricated titanium-alloy bone plate to a vacuum heat treatment. Results indicated that the bone plate has a hardness of HV1 360–HV1 390, an ultimate tensile strength of 1000–1100 MPa, yield strength of 900–950 MPa, and an elongation of 8%–10%. Pre-operative experiments and operation rehearsal were performed using the customized bone plate and the ABC-made pelvic model. Finally, the customized bone plate was clinically applied. The intraoperative C-arm and postoperative X-ray imaging results indicated that the customized bone plate matched well to the damaged pelvis. The customized bone plate fixed the broken bone and guides pelvis restoration while reducing operation time to about two hours. The customized bone plate eliminated the need for preoperative titanium plate pre-bending, thereby greatly reducing surgical wounds and operation time. PMID:28772395

Utah optrode array customization using stereotactic brain atlases and 3-D CAD modeling for optogenetic neocortical interrogation in small rodents and nonhuman primates.

PubMed

Boutte, Ronald W; Merlin, Sam; Yona, Guy; Griffiths, Brandon; Angelucci, Alessandra; Kahn, Itamar; Shoham, Shy; Blair, Steve

2017-10-01

As the optogenetic field expands, the need for precise targeting of neocortical circuits only grows more crucial. This work demonstrates a technique for using Solidworks ® computer-aided design (CAD) and readily available stereotactic brain atlases to create a three-dimensional (3-D) model of the dorsal region of area visual cortex 4 (V4D) of the macaque monkey ( Macaca fascicularis ) visual cortex. The 3-D CAD model of the brain was used to customize an [Formula: see text] Utah optrode array (UOA) after it was determined that a high-density ([Formula: see text]) UOA caused extensive damage to marmoset ( Callithrix jacchus ) primary visual cortex as assessed by electrophysiological recording of spiking activity through a 1.5-mm-diameter through glass via. The [Formula: see text] UOA was customized for optrode length ([Formula: see text]), optrode width ([Formula: see text]), optrode pitch ([Formula: see text]), backplane thickness ([Formula: see text]), and overall form factor ([Formula: see text]). Two [Formula: see text] UOAs were inserted into layer VI of macaque V4D cortices with minimal damage as assessed in fixed tissue cytochrome oxidase staining in nonrecoverable surgeries. Additionally, two [Formula: see text] arrays were implanted in mice ( Mus musculus ) motor cortices, providing early evidence for long-term tolerability (over 6 months), and for the ability to integrate the UOA with a Holobundle light delivery system toward patterned optogenetic stimulation of cortical networks.

Queues with Dropping Functions and General Arrival Processes

PubMed Central

Chydzinski, Andrzej; Mrozowski, Pawel

2016-01-01

In a queueing system with the dropping function the arriving customer can be denied service (dropped) with the probability that is a function of the queue length at the time of arrival of this customer. The potential applicability of such mechanism is very wide due to the fact that by choosing the shape of this function one can easily manipulate several performance characteristics of the queueing system. In this paper we carry out analysis of the queueing system with the dropping function and a very general model of arrival process—the model which includes batch arrivals and the interarrival time autocorrelation, and allows for fitting the actual shape of the interarrival time distribution and its moments. For such a system we obtain formulas for the distribution of the queue length and the overall customer loss ratio. The analytical results are accompanied with numerical examples computed for several dropping functions. PMID:26943171

Using quality function deployment to capture the voice of the customer and translate it into the voice of the provider.

PubMed

Chaplin, E; Bailey, M; Crosby, R; Gorman, D; Holland, X; Hippe, C; Hoff, T; Nawrocki, D; Pichette, S; Thota, N

1999-06-01

Health care has a number of historical barriers to capturing the voice of the customer and to incorporating customer wants into health care services, whether the customer is a patient, an insurer, or a community. Quality function deployment (QFD) is a set of tools and practices that can help overcome these barriers to form a process for the planning and design or redesign of products and services. The goal of the project was to increase referral volume and to improve a rehabilitation hospital's capacity to provide comprehensive medical and/or legal evaluations for people with complex and catastrophic injuries or illnesses. HIGH-LEVEL VIEW OF QFD AS A PROCESS: The steps in QFD are as follows: capture of the voice of the customer, quality deployment, functions deployment, failure mode deployment, new process deployment, and task deployment. The output of each step becomes the input to a matrix tool or table of the next step of the process. In 3 1/2 months a nine-person project team at Continental Rehabilitation Hospital (San Diego) used QFD tools to capture the voice of the customer, use these data as the basis for a questionnaire on important qualities of service from the customer's perspective, obtain competitive data on how the organization was perceived to be meeting the demanded qualities, identify measurable dimensions and targets of these qualities, and incorporate the functions and tasks into the delivery of service which are necessary to meet the demanded qualities. The future of providing health care services will belong to organizations that can adapt to a rapidly changing environment and to demands for new products and services that are produced and delivered in new ways.

19 CFR 201.4 - Performance of functions.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 3 2010-04-01 2010-04-01 false Performance of functions. 201.4 Section 201.4 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION GENERAL RULES OF GENERAL APPLICATION... of 1930, or (2) a matter under an investigation pursuant to section 202 of the Trade Act of 1974 (19...

19 CFR 201.4 - Performance of functions.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 19 Customs Duties 3 2013-04-01 2013-04-01 false Performance of functions. 201.4 Section 201.4 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION GENERAL RULES OF GENERAL APPLICATION... of 1930, or (2) a matter under an investigation pursuant to section 202 of the Trade Act of 1974 (19...

19 CFR 201.4 - Performance of functions.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 3 2011-04-01 2011-04-01 false Performance of functions. 201.4 Section 201.4 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION GENERAL RULES OF GENERAL APPLICATION... of 1930, or (2) a matter under an investigation pursuant to section 202 of the Trade Act of 1974 (19...

19 CFR 201.4 - Performance of functions.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 19 Customs Duties 3 2012-04-01 2012-04-01 false Performance of functions. 201.4 Section 201.4 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION GENERAL RULES OF GENERAL APPLICATION... of 1930, or (2) a matter under an investigation pursuant to section 202 of the Trade Act of 1974 (19...

19 CFR 201.4 - Performance of functions.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 19 Customs Duties 3 2014-04-01 2014-04-01 false Performance of functions. 201.4 Section 201.4 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION GENERAL RULES OF GENERAL APPLICATION... of 1930, or (2) a matter under an investigation pursuant to section 202 of the Trade Act of 1974 (19...

Performance characteristics of a batch service queueing system with functioning server failure and multiple vacations

NASA Astrophysics Data System (ADS)

Niranjan, S. P.; Chandrasekaran, V. M.; Indhira, K.

2018-04-01

This paper examines bulk arrival and batch service queueing system with functioning server failure and multiple vacations. Customers are arriving into the system in bulk according to Poisson process with rate λ. Arriving customers are served in batches with minimum of ‘a’ and maximum of ‘b’ number of customers according to general bulk service rule. In the service completion epoch if the queue length is less than ‘a’ then the server leaves for vacation (secondary job) of random length. After a vacation completion, if the queue length is still less than ‘a’ then the server leaves for another vacation. The server keeps on going vacation until the queue length reaches the value ‘a’. The server is not stable at all the times. Sometimes it may fails during functioning of customers. Though the server fails service process will not be interrupted.It will be continued for the current batch of customers with lower service rate than the regular service rate. The server will be repaired after the service completion with lower service rate. The probability generating function of the queue size at an arbitrary time epoch will be obtained for the modelled queueing system by using supplementary variable technique. Moreover various performance characteristics will also be derived with suitable numerical illustrations.

Buffering the negative effects of employee surface acting: the moderating role of employee-customer relationship strength and personalized services.

PubMed

Wang, Karyn L; Groth, Markus

2014-03-01

The impact of emotional labor on customer outcomes is gaining considerable attention in the literature, with research suggesting that the authenticity of emotional displays may positively impact customer outcomes. However, research investigating the impact of more inauthentic emotions on service delivery outcomes is mixed (see Chi, Grandey, Diamond, & Krimmel, 2011). This study explores 2 potential reasons for why the service outcomes of inauthentic emotions are largely inconsistent: the impact of distinct surface acting strategies and the role of service delivery context. Drawing on social-functional theories of emotions, we surveyed 243 dyads of employees and customers from a wide variety of services to examine the links between employee surface acting and customer service satisfaction, and whether this relationship is moderated by relationship strength and service personalization. Our findings suggest that faking positive emotions has no bearing on service satisfaction, but suppressing negative emotions interacts with contextual factors to predict customers' service satisfaction, in line with social-functional theories of emotions. Specifically, customers who know the employee well are less sensitive to the negative effects of suppressed negative emotions, and customers in highly personalized service encounters are more sensitive to the negative effects of suppressed negative emotions. We conclude with a discussion of theoretical and practical implications.

76 FR 59759 - Self-Regulatory Organizations; Financial Industry Regulatory Authority, Inc.; Notice of Filing...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-27

... FINRA members have attained specified levels of competence and knowledge, consistent with applicable... functions: F1: Seeks Business for the Broker-Dealer through Customers and Potential Customers, 20 questions; F2: Evaluates Customers' Other Security Holdings, Financial Situation and Needs, Financial Status...

How to improve the promotion of Korean beef barbecue, bulgogi, for international customers. An application of quality function deployment.

PubMed

Park, So-Hyun; Ham, Sunny; Lee, Min-A

2012-10-01

Quality function deployment (QFD) is a product development technique that translates customer requirements into activities for the development of products and services. This study utilizes QFD to identify American customer's requirements for bulgogi, a popular Korean dish among international customers, and how to fulfill those requirements. A customer survey and an expert opinion survey were conducted for US customers. The top five customer requirements for bulgogi were identified as taste, freshness, flavor, tenderness, and juiciness; ease of purchase was included in the place of tenderness after calculating the weight requirements. Eighteen engineering characteristics were developed, and a 'localization of bulgogi menu' is strongly related to the other characteristics as well. The results from the calculation of relative importance of engineering characteristics identified that the 'control of marinating time', 'localization of bulgogi menu', 'improvement of cooking and serving process', 'development of recipe by parts of beef', and 'use of various seasonings' were the highest contributors to the overall improvement of bulgogi. The relative importance of engineering characteristics, correlation, and technical difficulties are ranked and integrated to develop the most effective strategy. The findings are discussed relative to industry implications. Copyright © 2012 Elsevier Ltd. All rights reserved.

Fostering employee service creativity: Joint effects of customer empowering behaviors and supervisory empowering leadership.

PubMed

Dong, Yuntao; Liao, Hui; Chuang, Aichia; Zhou, Jing; Campbell, Elizabeth M

2015-09-01

Integrating insights from the literature on customers' central role in service and the literature on employee creativity, we offer theoretical and empirical account of how and when customer empowering behaviors can motivate employee creativity during service encounters and, subsequently, influence customer satisfaction with service experience. Using multilevel, multisource, experience sampling data from 380 hairstylists matched with 3550 customers in 118 hair salons, we found that customer empowering behaviors were positively related to employee creativity and subsequent customer satisfaction via employee state promotion focus. Results also showed that empowering behaviors from different agents function synergistically in shaping employee creativity: supervisory empowering leadership strengthened the indirect effect of customer empowering behaviors on employee creativity via state promotion focus. (c) 2015 APA, all rights reserved).

22 CFR 211.9 - Liability for loss damage or improper distribution of commodities.

Code of Federal Regulations, 2010 CFR

2010-04-01

... cargo; (B) Report on discharging method (including whether a scale was used, its type and calibration and other factors affecting its accuracy, or an explanation of why a scale was not used and how weight... customs; (D) Provide actual or estimated (if scales not used) quantity of cargo lost during discharge and...

Encryption and the Loss of Patient Data

ERIC Educational Resources Information Center

Miller, Amalia R.; Tucker, Catherine E.

2011-01-01

Fast-paced IT advances have made it increasingly possible and useful for firms to collect data on their customers on an unprecedented scale. One downside of this is that firms can experience negative publicity and financial damage if their data are breached. This is particularly the case in the medical sector, where we find empirical evidence that…

Customer and mission influence on space station architecture

NASA Technical Reports Server (NTRS)

Runge, F. C.

1985-01-01

Overall Space Station architecture is presented in schematic outlines and plans. How the customer and mission needs influence this design is studied. The uses, occupants, activities, interfaces, utilities, locomotion, environments, and technological costs are all factors which influence the architecture. User and system functions are profiled, interfaces are characterized and functions are grouped. These lead to packaging of functions into modules and the design of system and user accommodations.

Listening to the Voice of the Customer.

ERIC Educational Resources Information Center

Schauerman, Sam; And Others

One of the major tenets of Total Quality Management (TQM) is that organizations need to adopt a strong customer focus. At El Camino College (ECC) in Torrance, California, a matrix was developed to identify and describe ECC's direct and indirect internal and external customers. ECC then applied Quality Function Deployment (QFD), a strategic tool…

Structural and Functional Biomedical Imaging Using Polarization-Based Optical Coherence Tomography

NASA Astrophysics Data System (ADS)

Black, Adam J.

Biomedical imaging has had an enormous impact in medicine and research. There are numerous imaging modalities covering a large range of spatial and temporal scales, penetration depths, along with indicators for function and disease. As these imaging technologies mature, the quality of the images they produce increases to resolve finer details with greater contrast at higher speeds which aids in a faster, more accurate diagnosis in the clinic. In this dissertation, polarization-based optical coherence tomography (OCT) systems are used and developed to image biological structure and function with greater speeds, signal-to-noise (SNR) and stability. OCT can image with spatial and temporal resolutions in the micro range. When imaging any sample, feedback is very important to verify the fidelity and desired location on the sample being imaged. To increase frame rates for display as well as data throughput, field-programmable gate arrays (FPGAs) were used with custom algorithms to realize real-time display and streaming output for continuous acquisition of large datasets of swept-source OCT systems. For spectral domain (SD) OCT systems, significant increases in signal-to-noise ratios were achieved from a custom balanced detection (BD) OCT system. The BD system doubled measured signals while reducing common term. For functional imaging, a real-time directed scanner was introduced to visualize the 3D image of a sample to identify regions of interest prior to recording. Elucidating the characteristics of functional OCT signals with the aid of simulations, novel processing methods were also developed to stabilize samples being imaged and identify possible origins of functional signals being measured. Polarization-sensitive OCT was used to image cardiac tissue before and after clearing to identify the regions of vascular perfusion from a coronary artery. The resulting 3D image provides a visualization of the perfusion boundaries for the tissue that would be damaged from a myocardial infarction to possibly identity features that lead to fatal cardiac arrhythmias. 3D functional imaging was used to measure functional retinal activity from a light stimulus. In some cases, single trial responses were possible; measured at the outer segment of the photoreceptor layer. The morphology and time-course of these signals are similar to the intrinsic optical signals reported from phototransduction. Assessing function in the retina could aid in early detection of degenerative diseases of the retina, such as glaucoma and macular degeneration.

If You're a Rawlsian, How Come You're So Close to Utilitarianism and Intuitionism? A Critique of Daniels's Accountability for Reasonableness.

PubMed

Badano, Gabriele

2018-03-01

Norman Daniels's theory of 'accountability for reasonableness' is an influential conception of fairness in healthcare resource allocation. Although it is widely thought that this theory provides a consistent extension of John Rawls's general conception of justice, this paper shows that accountability for reasonableness has important points of contact with both utilitarianism and intuitionism, the main targets of Rawls's argument. My aim is to demonstrate that its overlap with utilitarianism and intuitionism leaves accountability for reasonableness open to damaging critiques. The important role that utilitarian-like cost-effectiveness calculations are allowed to play in resource allocation processes disregards the separateness of persons and is seriously unfair towards individuals whose interests are sacrificed for the sake of groups. Furthermore, the function played by intuitions in settling frequent value conflicts opens the door for sheer custom and vested interests to steer decision-making.

A monolithic glass chip for active single-cell sorting based on mechanical phenotyping.

PubMed

Faigle, Christoph; Lautenschläger, Franziska; Whyte, Graeme; Homewood, Philip; Martín-Badosa, Estela; Guck, Jochen

2015-03-07

The mechanical properties of biological cells have long been considered as inherent markers of biological function and disease. However, the screening and active sorting of heterogeneous populations based on serial single-cell mechanical measurements has not been demonstrated. Here we present a novel monolithic glass chip for combined fluorescence detection and mechanical phenotyping using an optical stretcher. A new design and manufacturing process, involving the bonding of two asymmetrically etched glass plates, combines exact optical fiber alignment, low laser damage threshold and high imaging quality with the possibility of several microfluidic inlet and outlet channels. We show the utility of such a custom-built optical stretcher glass chip by measuring and sorting single cells in a heterogeneous population based on their different mechanical properties and verify sorting accuracy by simultaneous fluorescence detection. This offers new possibilities of exact characterization and sorting of small populations based on rheological properties for biological and biomedical applications.

Caffeine-catalyzed gels.

PubMed

DiCiccio, Angela M; Lee, Young-Ah Lucy; Glettig, Dean L; Walton, Elizabeth S E; de la Serna, Eva L; Montgomery, Veronica A; Grant, Tyler M; Langer, Robert; Traverso, Giovanni

2018-07-01

Covalently cross-linked gels are utilized in a broad range of biomedical applications though their synthesis often compromises easy implementation. Cross-linking reactions commonly utilize catalysts or conditions that can damage biologics and sensitive compounds, producing materials that require extensive post processing to achieve acceptable biocompatibility. As an alternative, we report a batch synthesis platform to produce covalently cross-linked materials appropriate for direct biomedical application enabled by green chemistry and commonly available food grade ingredients. Using caffeine, a mild base, to catalyze anhydrous carboxylate ring-opening of diglycidyl-ether functionalized monomers with citric acid as a tri-functional crosslinking agent we introduce a novel poly(ester-ether) gel synthesis platform. We demonstrate that biocompatible Caffeine Catalyzed Gels (CCGs) exhibit dynamic physical, chemical, and mechanical properties, which can be tailored in shape, surface texture, solvent response, cargo release, shear and tensile strength, among other potential attributes. The demonstrated versatility, low cost and facile synthesis of these CCGs renders them appropriate for a broad range of customized engineering applications including drug delivery constructs, tissue engineering scaffolds, and medical devices. Copyright © 2018 The Authors. Published by Elsevier Ltd.. All rights reserved.

3D-Printing Technologies for Craniofacial Rehabilitation, Reconstruction, and Regeneration.

PubMed

Nyberg, Ethan L; Farris, Ashley L; Hung, Ben P; Dias, Miguel; Garcia, Juan R; Dorafshar, Amir H; Grayson, Warren L

2017-01-01

The treatment of craniofacial defects can present many challenges due to the variety of tissue-specific requirements and the complexity of anatomical structures in that region. 3D-printing technologies provide clinicians, engineers and scientists with the ability to create patient-specific solutions for craniofacial defects. Currently, there are three key strategies that utilize these technologies to restore both appearance and function to patients: rehabilitation, reconstruction and regeneration. In rehabilitation, 3D-printing can be used to create prostheses to replace or cover damaged tissues. Reconstruction, through plastic surgery, can also leverage 3D-printing technologies to create custom cutting guides, fixation devices, practice models and implanted medical devices to improve patient outcomes. Regeneration of tissue attempts to replace defects with biological materials. 3D-printing can be used to create either scaffolds or living, cellular constructs to signal tissue-forming cells to regenerate defect regions. By integrating these three approaches, 3D-printing technologies afford the opportunity to develop personalized treatment plans and design-driven manufacturing solutions to improve aesthetic and functional outcomes for patients with craniofacial defects.

3D-Printing Technologies for Craniofacial Rehabilitation, Reconstruction, and Regeneration

PubMed Central

Nyberg, Ethan L.; Farris, Ashley L.; Hung, Ben P.; Dias, Miguel; Garcia, Juan R.; Dorafshar, Amir H.; Grayson, Warren L.

2016-01-01

The treatment of craniofacial defects can present many challenges due to the variety of tissue-specific requirements and the complexity of anatomical structures in that region. 3D-printing technologies provide clinicians, engineers and scientists with the ability to create patient-specific solutions for craniofacial defects. Currently, there are 3 key strategies that utilize these technologies to restore both appearance and function to patients: rehabilitation, reconstruction and regeneration. In rehabilitation, 3D-printing can be used to create prostheses to replace or cover damaged tissues. Reconstruction, through plastic surgery, can also leverage 3D-printing technologies to create custom cutting guides, fixation devices, practice models and implanted medical devices to improve patient outcomes. Regeneration of tissue attempts to replace defects with biological materials. 3D-printing can be used to create either scaffolds or living, cellular constructs to signal tissue-forming cells to regenerate defect regions. By integrating these three approaches, 3D-printing technologies afford the opportunity to develop personalized treatment plans and design-driven manufacturing solutions to improve aesthetic and functional outcomes for patients with craniofacial defects. PMID:27295184

Improving Customer Satisfaction in an R and D Environment

NASA Technical Reports Server (NTRS)

Alexander, Anita; Liou, Y. H. Andrew

1998-01-01

Satisfying customer needs is critical to the sustained competitive advantage of service suppliers. It is therefore important to understand the types of customer needs which, if fulfilled or exceeded, add value and contribute to overall customer satisfaction. This study identifies the needs of various research and development (R&D) customers who contract for engineering and design support services. The Quality Function Deployment (QFD) process was used to organize and translate each customer need into performance measures that, if implemented, can improve customer satisfaction. This study also provides specific performance measures that will more accurately guide the efforts of the engineering supplier. These organizations can either implement the QFD methodology presented herein or extract a few performance measures that are specific to the quality dimensions in need of improvement. Listening to 'what' customers talk about is a good first start.

Removal of a foreign body from the skull base using a customized computer-designed guide bar.

PubMed

Wei, Ran; Xiang-Zhen, Liu; Bing, Guo; Da-Long, Shu; Ze-Ming, Tan

2010-06-01

Foreign bodies located at the base of the skull pose a surgical challenge. Here, a customized computer-designed surgical guide bar was designed to facilitate removal of a skull base foreign body. Within 24h of the patient's presentation, a guide bar and mounting platform were designed to remove a foreign body located adjacent to the transverse process of the atlas and pressing against the internal carotid artery. The foreign body was successfully located and removed using the custom designed guide bar and computer operative planning. Ten months postoperatively the patient was free of complaints and lacked any complications such as restricted opening of the mouth or false aneurysm. The inferior alveolar nerve damage noted immediately postoperatively (a consequence of mandibular osteotomy) was slightly reduced at follow-up, but labial numbness persisted. The navigation tools described herein were successfully employed to aid foreign body removal from the skull base. Copyright (c) 2009 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

Omori Law After Exogenous Shocks on Supplier-Customer Network

NASA Astrophysics Data System (ADS)

Fujiwara, Yoshi

We study the relaxation process of a supplier-customer network after mass destruction due to two giant earthquakes, Kobe 1995 and East Japan 2011, by investigating the number of chained failures. Firstly, a mass destruction and intervention of business activities in the damaged areas can be considered as a main shock. The exogenous shock was propagated on the supplier-customer network deteriorating financial states of other firms, even if they are not located in geographical neighbors. To quantify such aftershocks, we use chained failures on the network assuming that they indicate the trace of propagation of shocks. We show that the number of chained failures in its temporal change obeys an Omori-law, a power-law relaxation. This finding implies that the relaxation is much more sluggish than one would naively expect, and that it might be possible to estimate the extent and duration of aftershocks by using the empirical law. Several issues are discussed including the origin of the long-time relaxation.

Competing strategically through market orientation.

PubMed

Rapert, M I; Yarbrough, L

1997-01-01

As organizations seek to better understand their customers, competitors, and environments, the marketing function effectively serves as the support mechanism for these activities in many industries. Accordingly, in many organizations the marketing concept has been elevated to the stature of a strategic weapon, manifested in the form of market orientation. Market-oriented firms emphasize the collection, organization, and dissemination of information regarding both customers and competitors. This strategy is especially well-suited for the health care industry where customer knowledge is of paramount importance, customer interaction is instantaneous, and customer satisfaction is essential. Results of a national study of general service hospitals suggest that firms which embrace a market orientation benefit through enhanced customer satisfaction and quality.

An Analysis of the Field Service Function of Selected Electronics Firms

DTIC Science & Technology

1992-01-01

Customer Engineer Evaluation ............... 175 Customer Satisfaction ...................... 176 Customer Complaints ......................... 176...system to assure satisfaction of requirements for operation, maintenance, and repair of products; -- the establishment of a responsive, efficient, and cost...research. This dissertation addresses some of the identified research needs and provides a contribution to the field service body of knowledge. By analyzing

Innovative Product Design Based on Comprehensive Customer Requirements of Different Cognitive Levels

PubMed Central

Zhao, Wu; Zheng, Yake; Wang, Rui; Wang, Chen

2014-01-01

To improve customer satisfaction in innovative product design, a topology structure of customer requirements is established and an innovative product approach is proposed. The topology structure provides designers with reasonable guidance to capture the customer requirements comprehensively. With the aid of analytic hierarchy process (AHP), the importance of the customer requirements is evaluated. Quality function deployment (QFD) is used to translate customer requirements into product and process design demands and pick out the technical requirements which need urgent improvement. In this way, the product is developed in a more targeted way to satisfy the customers. the theory of innovative problems solving (TRIZ) is used to help designers to produce innovative solutions. Finally, a case study of automobile steering system is used to illustrate the application of the proposed approach. PMID:25013862

Innovative product design based on comprehensive customer requirements of different cognitive levels.

PubMed

Li, Xiaolong; Zhao, Wu; Zheng, Yake; Wang, Rui; Wang, Chen

2014-01-01

To improve customer satisfaction in innovative product design, a topology structure of customer requirements is established and an innovative product approach is proposed. The topology structure provides designers with reasonable guidance to capture the customer requirements comprehensively. With the aid of analytic hierarchy process (AHP), the importance of the customer requirements is evaluated. Quality function deployment (QFD) is used to translate customer requirements into product and process design demands and pick out the technical requirements which need urgent improvement. In this way, the product is developed in a more targeted way to satisfy the customers. the theory of innovative problems solving (TRIZ) is used to help designers to produce innovative solutions. Finally, a case study of automobile steering system is used to illustrate the application of the proposed approach.

U.S. National Committee proposed revision to the ISO Laser Damage Standard

NASA Astrophysics Data System (ADS)

Arenberg, Jonathan W.; Howland, Donna; Thomas, Michael; Turner, Trey; Bellum, John; Field, Ella; Carr, C. Wren; Shaffer, Gary; Brophy, Matthew; Krisiloff, Allen

2017-11-01

This paper reports on the fundamental idea behind a US National Committee, The Optics and Electro-Optics Standards Council (OEOSC) Task Force (TF) 7, proposal for a so-called Type 1 laser damage test procedure. A Type 1 test is designed to give a simple binary, pass or fail, result. Such tests are intended for the transactional type of damage testing typical of acceptance and quality control testing. As such is it intended for bulk of certification of optics for the ability to survive a given fluence, useful for manufacturers of optics and their customers, the system builders. At the root of the proposed method is the probability that an optic of area A will have R or less damage occurrences with a user specified probability P at test fluence Φ. This assessment is made by a survey of area and the observation of n events. The paper presents the derivation of probability of N or less damage sites on A given n events observed in area a. The paper concludes with the remaining steps to development of a useful test procedure based on the idea presented.

ScanImage: flexible software for operating laser scanning microscopes.

PubMed

Pologruto, Thomas A; Sabatini, Bernardo L; Svoboda, Karel

2003-05-17

Laser scanning microscopy is a powerful tool for analyzing the structure and function of biological specimens. Although numerous commercial laser scanning microscopes exist, some of the more interesting and challenging applications demand custom design. A major impediment to custom design is the difficulty of building custom data acquisition hardware and writing the complex software required to run the laser scanning microscope. We describe a simple, software-based approach to operating a laser scanning microscope without the need for custom data acquisition hardware. Data acquisition and control of laser scanning are achieved through standard data acquisition boards. The entire burden of signal integration and image processing is placed on the CPU of the computer. We quantitate the effectiveness of our data acquisition and signal conditioning algorithm under a variety of conditions. We implement our approach in an open source software package (ScanImage) and describe its functionality. We present ScanImage, software to run a flexible laser scanning microscope that allows easy custom design.

75 FR 28544 - Procedures for Considering Requests From the Public for Textile and Apparel Safeguard Actions on...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-21

... textile and apparel safeguard provisions, provided for in Article 3.1 of the United States-Oman Free Trade... customs duty under the Agreement, an Omani textile or apparel article is being imported into the United... article, and under such conditions as to cause serious damage or actual threat thereof to a U.S. industry...

77 FR 15997 - Interim Procedures for Considering Requests From the Public for Textile and Apparel Safeguard...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-19

... textile and apparel safeguard provision, provided for in Article 4.1 of the United States-Korea Free Trade... elimination of a customs duty under the Agreement, a Korean textile or apparel article is being imported into... for that article, and under such conditions as to cause serious damage or actual threat thereof to a U...

19 CFR 158.3 - Allowance for lost or missing packages included in an entry summary.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 19 Customs Duties 2 2012-04-01 2012-04-01 false Allowance for lost or missing packages included in..., DAMAGED, ABANDONED, OR EXPORTED Lost or Missing Packages and Deficiencies in Contents of Packages § 158.3 Allowance for lost or missing packages included in an entry summary. Allowance shall be made in the...

19 CFR 158.3 - Allowance for lost or missing packages included in an entry summary.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 19 Customs Duties 2 2013-04-01 2013-04-01 false Allowance for lost or missing packages included in..., DAMAGED, ABANDONED, OR EXPORTED Lost or Missing Packages and Deficiencies in Contents of Packages § 158.3 Allowance for lost or missing packages included in an entry summary. Allowance shall be made in the...

19 CFR 158.3 - Allowance for lost or missing packages included in an entry summary.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 2 2010-04-01 2010-04-01 false Allowance for lost or missing packages included in..., DAMAGED, ABANDONED, OR EXPORTED Lost or Missing Packages and Deficiencies in Contents of Packages § 158.3 Allowance for lost or missing packages included in an entry summary. Allowance shall be made in the...

19 CFR 158.3 - Allowance for lost or missing packages included in an entry summary.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 2 2011-04-01 2011-04-01 false Allowance for lost or missing packages included in..., DAMAGED, ABANDONED, OR EXPORTED Lost or Missing Packages and Deficiencies in Contents of Packages § 158.3 Allowance for lost or missing packages included in an entry summary. Allowance shall be made in the...

19 CFR 158.3 - Allowance for lost or missing packages included in an entry summary.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 19 Customs Duties 2 2014-04-01 2014-04-01 false Allowance for lost or missing packages included in..., DAMAGED, ABANDONED, OR EXPORTED Lost or Missing Packages and Deficiencies in Contents of Packages § 158.3 Allowance for lost or missing packages included in an entry summary. Allowance shall be made in the...

Arthroscopic suture retrievers and shuttles: a biomechanical investigation of the force required for tendon penetration and defect size.

PubMed

Lenz, Christopher G; Wieser, Karl; Lajtai, Georg; Meyer, Dominik C

2015-11-17

To compare instruments designed for arthroscopic suture handling during arthroscopic rotator cuff repair, to assess the force needed to penetrate the tendon, and to evaluate the residual defect size. Twenty-one instruments were each tested ten times on thawed sheep infraspinatus tendons. The force needed to pierce the tendon with each instrument was measured using a custom setup. Bone wax plates were used to make the perforation marks visible and to quantify the lesions each instrument created. The force to pierce a tendon had a range of 5.6-18.5 N/mm. Within the group of suture retrievers, the angled instruments required in average 85 % higher forces than straight instruments. The lesion area had a range of 2-7 mm(2). Suture retrievers produced significantly larger lesion sizes compared with suture shuttles. For the identical task of passing a suture through a tendon, differences exist regarding the ease of tendon penetration and potential damage to the tendon for different tools. The design, function, and resulting lesion size may be relevant and important for surgical handling and to avoid excess structural damage to the tendon. These results suggest that choosing the most appropriate tools for arthroscopic suture stitching influences the ease of handling and final integrity of the tissue.

Novel Platform for MRI-Guided Convection-Enhanced Delivery of Therapeutics: Preclinical Validation in Nonhuman Primate Brain

PubMed Central

Richardson, R. Mark; Kells, Adrian P.; Martin, Alastair J.; Larson, Paul S.; Starr, Philip A.; Piferi, Peter G.; Bates, Geoffrey; Tansey, Lisa; Rosenbluth, Kathryn H.; Bringas, John R.; Berger, Mitchel S.; Bankiewicz, Krystof S.

2011-01-01

Background/Aims A skull-mounted aiming device and integrated software platform has been developed for MRI-guided neurological interventions. In anticipation of upcoming gene therapy clinical trials, we adapted this device for real-time convection-enhanced delivery of therapeutics via a custom-designed infusion cannula. The targeting accuracy of this delivery system and the performance of the infusion cannula were validated in nonhuman primates. Methods Infusions of gadoteridol were delivered to multiple brain targets and the targeting error was determined for each cannula placement. Cannula performance was assessed by analyzing gadoteridol distributions and by histological analysis of tissue damage. Results The average targeting error for all targets (n = 11) was 0.8 mm (95% CI = 0.14). For clinically relevant volumes, the distribution volume of gadoteridol increased as a linear function (R2 = 0.97) of the infusion volume (average slope = 3.30, 95% CI = 0.2). No infusions in any target produced occlusion, cannula reflux or leakage from adjacent tracts, and no signs of unexpected tissue damage were observed. Conclusions This integrated delivery platform allows real-time convection-enhanced delivery to be performed with a high level of precision, predictability and safety. This approach may improve the success rate for clinical trials involving intracerebral drug delivery by direct infusion. PMID:21494065

In situ gene expression profiling of the thermoacidophilic alga Cyanidioschyzon in relation to visible and ultraviolet irradiance.

PubMed

Skorupa, Dana J; Castenholz, Richard W; Mazurie, Aurélien; Carey, Charles; Rosenzweig, Frank; McDermott, Timothy R

2014-06-01

Ultraviolet and high-intensity visible radiation generate reactive intermediates that damage phototrophic microorganisms. In Yellowstone National Park, the thermoacidophilic alga Cyanidioschyzon exhibits an annual seasonal biomass fluctuation referred to as 'mat decline', where algal viability decreases as ultraviolet and visible irradiances increase during summer. We examined the role irradiance might play in mat decline using irradiance filters that uncouple ultraviolet and visible effects along with custom microarrays to study gene expression in situ. Of the 6507 genes, 88% showed no response to ultraviolet or visible, implying that at the biomolecular level, these algae inhabit a chemostat-like environment and is consistent with the near constant aqueous chemistry measured. The remaining genes exhibited expression changes linked to ultraviolet exposure, to increased visible radiation, or to the apparent combined effects of ultraviolet and visible. Expression of DNA repetitive elements was synchronized, being repressed by visible but also influenced by ultraviolet. At highest irradiance levels, these algae reduced transcription of genes encoding functions involved with DNA replication, photosynthesis and cell cycle progression but exhibited an uptick in activities related to repairing DNA damage. This corroborates known physiological responses to ultraviolet and visible radiation, and leads us to provisionally conclude that mat decline is linked to photoinhibition. © 2013 Society for Applied Microbiology and John Wiley & Sons Ltd.

Applications of a damage tolerance analysis methodology in aircraft design and production

NASA Technical Reports Server (NTRS)

Woodward, M. R.; Owens, S. D.; Law, G. E.; Mignery, L. A.

1992-01-01

Objectives of customer mandated aircraft structural integrity initiatives in design are to guide material selection, to incorporate fracture resistant concepts in the design, to utilize damage tolerance based allowables and planned inspection procedures necessary to enhance the safety and reliability of manned flight vehicles. However, validated fracture analysis tools for composite structures are needed to accomplish these objectives in a timely and economical manner. This paper briefly describes the development, validation, and application of a damage tolerance methodology for composite airframe structures. A closed-form analysis code, entitled SUBLAM was developed to predict the critical biaxial strain state necessary to cause sublaminate buckling-induced delamination extension in an impact damaged composite laminate. An embedded elliptical delamination separating a thin sublaminate from a thick parent laminate is modelled. Predicted failure strains were correlated against a variety of experimental data that included results from compression after impact coupon and element tests. An integrated analysis package was developed to predict damage tolerance based margin-of-safety (MS) using NASTRAN generated loads and element information. Damage tolerance aspects of new concepts are quickly and cost-effectively determined without the need for excessive testing.

Prosthetic management of malpositioned implant using custom cast abutment

PubMed Central

Chatterjee, Aishwarya; Ragher, Mallikarjuna; Patil, Sanket; Chatterjee, Debopriya; Dandekeri, Savita; Prabhu, Vishnu

2015-01-01

Two cases are reported with malpositioned implants. Both the implants were placed 6–7 months back. They had osseointegrated well with the surrounding bone. However, they presented severe facial inclination. Case I was restored with custom cast abutment with an auto polymerizing acrylic gingival veneer. Case II was restored with custom cast UCLA type plastic implant abutment. Ceramic was directly fired on the custom cast abutments. The dual treatment strategy resulted in functional and esthetic restorations despite facial malposition of the implants. PMID:26538957

Shopper marketing: a new challenge for Spanish community pharmacies.

PubMed

Gavilan, Diana; Avello, Maria; Abril, Carmen

2014-01-01

Changes that have occurred over the past few decades in retailing and in the health care sector--namely, a drastic reduction in drug profit-margins, and a more critical use of health services by patients--have created a scenario characterized by rising competitiveness. This new context is necessitating community pharmacies (hereafter, pharmacies) to improve their business model through new strategies. Shopper marketing has proven invaluable in other retail settings and therefore, could be a critical element for new practices in pharmacies. First, to analyze how shopping experiences in pharmacies based on new practices in shopper marketing affect shopping behavior. Second, to study the mediating effect of customer satisfaction on the relationship between shopping experiences and shopping behavior. A self-reported questionnaire was developed to measure four concepts: hedonic experience (enjoyable), functional experience (goal-oriented), customer satisfaction and shopping behavior. Data were collected from 28 different pharmacies dispersed throughout Spain. Structural equation modeling (SEM) was used to test the relationships in the theoretical model. First, the measurement model was estimated to assess model fit, reliability, convergent and discriminant validity. Then, the parameters of the structural model were estimated and the mediation effects were subsequently tested. Functional experience and hedonic experience each significantly and positively correlate with consumer satisfaction and with customer shopping behavior (purchases and loyalty). Moreover, the effects of each type of experience on shopping behavior are partially mediated by customer satisfaction. The results suggest that even in Spanish pharmacies, which have traditionally been considered as strictly functional retailers, ensuring customer satisfaction and enhancing shopping behavior now demand more than just functional experiences. Moreover, a customer's experience at a pharmacy can itself trigger a shopping cycle; therefore, pharmacists should consider prioritizing investments in hedonic experiences. Copyright © 2014 Elsevier Inc. All rights reserved.

A 3D bioprinting exemplar of the consequences of the regulatory requirements on customized processes.

PubMed

Hourd, Paul; Medcalf, Nicholas; Segal, Joel; Williams, David J

2015-01-01

Computer-aided 3D printing approaches to the industrial production of customized 3D functional living constructs for restoration of tissue and organ function face significant regulatory challenges. Using the manufacture of a customized, 3D-bioprinted nasal implant as a well-informed but hypothetical exemplar, we examine how these products might be regulated. Existing EU and USA regulatory frameworks do not account for the differences between 3D printing and conventional manufacturing methods or the ability to create individual customized products using mechanized rather than craft approaches. Already subject to extensive regulatory control, issues related to control of the computer-aided design to manufacture process and the associated software system chain present additional scientific and regulatory challenges for manufacturers of these complex 3D-bioprinted advanced combination products.

Empirical research on Kano’s model and customer satisfaction

PubMed Central

Lin, Feng-Han; Tsai, Sang-Bing; Lee, Yu-Cheng; Hsiao, Cheng-Fu; Zhou, Jie; Wang, Jiangtao; Shang, Zhiwen

2017-01-01

Products are now developed based on what customers desire, and thus attractive quality creation has become crucial. In studies on customer satisfaction, methods for analyzing quality attributes and enhancing customer satisfaction have been proposed to facilitate product development. Although substantial studies have performed to assess the impact of the attributes on customer satisfaction, little research has been conducted that quantitatively calculate the odds of customer satisfaction for the Kano classification, fitting a nonlinear relationship between attribute-level performance and customer satisfaction. In the present study, the odds of customer satisfaction were determined to identify the classification of quality attributes, and took customer psychology into account to suggest how decision-makers should prioritize the allocation of resources. A novel method for quantitatively assessing quality attributes was proposed to determine classification criteria and fit the nonlinear relationship between quality attributes and customer satisfaction. Subsequently, a case study was conducted on bicycle user satisfaction to verify the novel method. The concept of customer satisfaction odds was integrated with the value function from prospect theory to understand quality attributes. The results of this study can serve as a reference for product designers to create attractive quality attributes in their products and thus enhance customer satisfaction. PMID:28873418

Empirical research on Kano's model and customer satisfaction.

PubMed

Lin, Feng-Han; Tsai, Sang-Bing; Lee, Yu-Cheng; Hsiao, Cheng-Fu; Zhou, Jie; Wang, Jiangtao; Shang, Zhiwen

2017-01-01

Products are now developed based on what customers desire, and thus attractive quality creation has become crucial. In studies on customer satisfaction, methods for analyzing quality attributes and enhancing customer satisfaction have been proposed to facilitate product development. Although substantial studies have performed to assess the impact of the attributes on customer satisfaction, little research has been conducted that quantitatively calculate the odds of customer satisfaction for the Kano classification, fitting a nonlinear relationship between attribute-level performance and customer satisfaction. In the present study, the odds of customer satisfaction were determined to identify the classification of quality attributes, and took customer psychology into account to suggest how decision-makers should prioritize the allocation of resources. A novel method for quantitatively assessing quality attributes was proposed to determine classification criteria and fit the nonlinear relationship between quality attributes and customer satisfaction. Subsequently, a case study was conducted on bicycle user satisfaction to verify the novel method. The concept of customer satisfaction odds was integrated with the value function from prospect theory to understand quality attributes. The results of this study can serve as a reference for product designers to create attractive quality attributes in their products and thus enhance customer satisfaction.

Impact of customized videotape education on quality of life in patients with chronic obstructive pulmonary disease.

PubMed

Petty, Thomas L; Dempsey, Edward C; Collins, Timothy; Pluss, William; Lipkus, Isaac; Cutter, Gary R; Chalmers, Robin; Mitchell, Amy; Weil, Kenneth C

2006-01-01

To compare the impact of a library of pulmonary rehabilitation videotapes versus an older videotape and usual care on quality of life and ability to perform activities of daily living in persons with chronic obstructive pulmonary disease. Two hundred fourteen patients diagnosed with chronic obstructive pulmonary disease, emphysema, or chronic bronchitis were recruited and randomized to receive customized videotapes, standard videotapes, or usual care. Outcome measures included the Fatigue Impact Scale, Seattle Obstructive Lung Disease Questionnaire, and the SF-36(R) Health Survey. Differences in coping skills and emotional functioning on the Seattle Obstructive Lung Disease Questionnaire were found among the 174 subjects who completed the study. The customized videotape group improved by 8.6 and 4.8 points, respectively, whereas the score of the other groups decreased by less than 1 point for the coping skills, and the scores of the standard video and the control groups decreased by 3.0 and 2.1 points, respectively, for emotional functioning (P < .05, all comparisons). The scores using the Fatigue Impact Scale also improved for the customized videotape group, whereas the scores of the others remained unchanged. Videotape users demonstrated better conversion to and retention of exercise habits, with over 80% of customized videotape subjects who reported exercise habits at baseline continuing the habits as compared with 40% in the usual care group. Sedentary subjects at baseline were more likely to begin and maintain exercise if randomized to videotapes. These findings demonstrate increased quality of life, lower fatigue, and better compliance with a prescribed exercise regimen among subjects using the customized videotapes. There was a significant improvement in emotional functioning and coping skills among customized videotape subjects.

Personal customizing exercise with a wearable measurement and control unit.

PubMed

Wang, Zhihui; Kiryu, Tohru; Tamura, Naoki

2005-06-28

Recently, wearable technology has been used in various health-related fields to develop advanced monitoring solutions. However, the monitoring function alone cannot meet all the requirements of customizing machine-based exercise on an individual basis by relying on biosignal-based controls. We propose a new wearable unit design equipped with measurement and control functions to support the customization process. The wearable unit can measure the heart rate and electromyogram signals during exercise performance and output workload control commands to the exercise machines. The workload is continuously tracked with exercise programs set according to personally customized workload patterns and estimation results from the measured biosignals by a fuzzy control method. Exercise programs are adapted by relying on a computer workstation, which communicates with the wearable unit via wireless connections. A prototype of the wearable unit was tested together with an Internet-based cycle ergometer system to demonstrate that it is possible to customize exercise on an individual basis. We tested the wearable unit in nine people to assess its suitability to control cycle ergometer exercise. The results confirmed that the unit could successfully control the ergometer workload and continuously support gradual changes in physical activities. The design of wearable units equipped with measurement and control functions is an important step towards establishing a convenient and continuously supported wellness environment.

Structural relationships between work environment and service quality perceptions as a function of customer contact intensity: implications for human service strategy.

PubMed

Scotti, Dennis J; Harmon, Joel; Behson, Scott J

2009-01-01

This study assesses the importance of customer-contact intensity at the service encounter level as a determinant of service quality assessments. Using data from the U.S. Department of Veterans Affairs, it shows that performance-driven human resources practices play an important role as determinants of employee customer orientation and service capability in both high-contact (outpatient healthcare) and low-contact (benefits claim processing) human service contexts. However, there existed significant differences across service delivery settings in the salience of customer orientation and the congruence between employee and customer perceptions of service quality, depending on the intensity of customer contact. In both contexts, managerial attention to high-performance work systems and customer-orientation has the potential to favorably impact perceptions of service quality, amplify consumer satisfaction, and enhance operational efficiency.

Catalog of Residential Depth-Damage Functions Used by the Army Corps of Engineers in Flood Damage Estimation

DTIC Science & Technology

1992-05-01

regression analysis. The strength of any one variable can be estimated along with the strength of the entire model in explaining the variance of percent... applicable a set of damage functions is to a particular situation. Sometimes depth- damage functions are embedded in computer programs which calculate...functions. Chapter Six concludes with recommended policies on the development and application of depth-damage functions. 5 6 CHAPTER TWO CONSTRUCTION OF

Mapping Natech risk due to earthquakes using RAPID-N

NASA Astrophysics Data System (ADS)

Girgin, Serkan; Krausmann, Elisabeth

2013-04-01

Natural hazard-triggered technological accidents (so-called Natech accidents) at hazardous installations are an emerging risk with possibly serious consequences due to the potential for release of hazardous materials, fires or explosions. For the reduction of Natech risk, one of the highest priority needs is the identification of Natech-prone areas and the systematic assessment of Natech risks. With hardly any Natech risk maps existing within the EU the European Commission's Joint Research Centre has developed a Natech risk analysis and mapping tool called RAPID-N, that estimates the overall risk of natural-hazard impact to industrial installations and its possible consequences. The results are presented as risk summary reports and interactive risk maps which can be used for decision making. Currently, RAPID-N focuses on Natech risk due to earthquakes at industrial installations. However, it will be extended to also analyse and map Natech risk due to floods in the near future. The RAPID-N methodology is based on the estimation of on-site natural hazard parameters, use of fragility curves to determine damage probabilities of plant units for various damage states, and the calculation of spatial extent, severity, and probability of Natech events potentially triggered by the natural hazard. The methodology was implemented as a web-based risk assessment and mapping software tool which allows easy data entry, rapid local or regional risk assessment and mapping. RAPID-N features an innovative property estimation framework to calculate on-site natural hazard parameters, industrial plant and plant unit characteristics, and hazardous substance properties. Custom damage states and fragility curves can be defined for different types of plant units. Conditional relationships can be specified between damage states and Natech risk states, which describe probable Natech event scenarios. Natech consequences are assessed using a custom implementation of U.S. EPA's Risk Management Program (RMP) Guidance for Offsite Consequence Analysis methodology. This custom implementation is based on the property estimation framework and allows the easy modification of model parameters and the substitution of equations with alternatives. RAPID-N can be applied at different stages of the Natech risk management process: It allows on the one hand the analysis of hypothetical Natech scenarios to prevent or prepare for a Natech accident by supporting land-use and emergency planning. On the other hand, once a natural disaster occurs RAPID-N can be used for rapidly locating facilities with potential Natech accident damage based on actual natural-hazard information. This provides a means to warn the population in the vicinity of the facilities in a timely manner. This presentation will introduce the specific features of RAPID-N and show the use of the tool by application to a case-study area.

Designing--and sustaining the gains from--a service strategy.

PubMed

deRoulet, D G

1993-01-01

Every company needs to develop a strategic approach to customer service. This article describes how to structure a service strategy, and how business partnerships can be used to enhance the customer service function.

Novel, customizable scoring functions, parameterized using N-PLS, for structure-based drug discovery.

PubMed

Catana, Cornel; Stouten, Pieter F W

2007-01-01

The ability to accurately predict biological affinity on the basis of in silico docking to a protein target remains a challenging goal in the CADD arena. Typically, "standard" scoring functions have been employed that use the calculated docking result and a set of empirical parameters to calculate a predicted binding affinity. To improve on this, we are exploring novel strategies for rapidly developing and tuning "customized" scoring functions tailored to a specific need. In the present work, three such customized scoring functions were developed using a set of 129 high-resolution protein-ligand crystal structures with measured Ki values. The functions were parametrized using N-PLS (N-way partial least squares), a multivariate technique well-known in the 3D quantitative structure-activity relationship field. A modest correlation between observed and calculated pKi values using a standard scoring function (r2 = 0.5) could be improved to 0.8 when a customized scoring function was applied. To mimic a more realistic scenario, a second scoring function was developed, not based on crystal structures but exclusively on several binding poses generated with the Flo+ docking program. Finally, a validation study was conducted by generating a third scoring function with 99 randomly selected complexes from the 129 as a training set and predicting pKi values for a test set that comprised the remaining 30 complexes. Training and test set r2 values were 0.77 and 0.78, respectively. These results indicate that, even without direct structural information, predictive customized scoring functions can be developed using N-PLS, and this approach holds significant potential as a general procedure for predicting binding affinity on the basis of in silico docking.

Expeditionary Lighting Systems for Military Shelters

DTIC Science & Technology

2009-11-04

Lumiled LED Housing Nonimaging Beamformer Heat Sink Connector Retractable Cable O Transportation Configuration Physical Optics Corporation (POC) LED...New Lighting Technologies: • Technology: Light Emitting Diode (LED) o Physical Optics Corp [SBIR] o Techshot [SBIR] [Congressional Effort o Jameson LED...rugged and durable—no lamp to damage or replace • Custom designed optical diffuser prevents glare and “eye spots” • Operates on universal voltage, 90

Vaccine stabilization: research, commercialization, and potential impact.

PubMed

Kristensen, Debra; Chen, Dexiang; Cummings, Ray

2011-09-22

All vaccines are susceptible to damage by elevated temperatures and many are also damaged by freezing. The distribution, storage, and use of vaccines therefore present challenges that could be reduced by enhanced thermostability, with resulting improvements in vaccine effectiveness. Formulation and processing technologies exist that can improve the stability of vaccines at temperature extremes, however, customization is required for individual vaccines and results are variable. Considerations affecting decisions about stabilization approaches include development cost, manufacturing cost, and the ease of use of the final product. Public sector agencies can incentivize vaccine developers to prioritize stabilization efforts through advocacy and by implementing policies that increase demand for thermostable vaccines. Copyright © 2011 Elsevier Ltd. All rights reserved.

Analysis on preemptive priority retrial queue with two types of customers, balking, optional re-service, single vacation and service interruption

NASA Astrophysics Data System (ADS)

Yuvarani, S.; Saravanarajan, M. C.

2017-11-01

This paper concerned with performance analysis of single server preemptive priority retrial queue with a single vacation where two types of customers are considered and they are called priority customers and ordinary customers. The ordinary customers arrive in batch into the system. The priority customers do not form any queue. After the completion of regular service, the customers may demand re-service for the previous service without joining the orbit or may leave the system. As soon as the system is empty, the server goes for vacation and the regular busy server can be subjected to breakdown. By using the supplementary variable technique, we obtain the steady-state probability generating functions for the system/orbit size. Some important system performance measures and the stochastic decomposition are discussed. Finally, numerical examples are presented to visualize the effect of parameters on system performance measures.

Customer satisfaction planning and industrial engineering move hospital towards in-house stockless program.

PubMed

Burton, R; Mauk, D

1993-03-01

By integrating customer satisfaction planning and industrial engineering techniques when examining internal costs and efficiencies, materiel managers are able to better realize what concepts will best meet their customers' needs. Defining your customer(s), applying industrial engineering techniques, completing work sampling studies, itemizing recommendations and benefits to each alternative, performing feasibility and cost-analysis matrixes and utilizing resources through productivity monitoring will get you on the right path toward selecting concepts to use. This article reviews the above procedures as they applied to one hospital's decision-making process to determine whether to incorporate a stockless inventory program. Through an analysis of customer demand, the hospital realized that stockless was the way to go, but not by outsourcing the function--the hospital incorporated an in-house stockless inventory program.

Observations of a pressurized hydraulic hose under lateral liquid impacts

NASA Astrophysics Data System (ADS)

Stewart, C. D.; Gorman, D. G.

The effects of 'pin-hole' failure of one pressurized hydraulic hose on its neighbour are investigated. A pressurized test hose was inserted into a custom testing apparatus and subjected to a series of ten short duration liquid impacts simulating the pin-hole failure of an initial hose. Subsequent displacements of the hose were filmed and plotted with respect to time. Three distinct pattern groups emerged which were used to explain the resultant damage to the hose. It was observed that the middle pattern, corresponding to impacts 6 and 7, appears to be the point where the very damaging hydraulic penetration mechanism became dominant and the outer layer of the hose failed. On completion of the ten impact series it was observed that a small hole on the outer surface of the hose gave way to a relatively large damaged area in the strength bearing inner braid material.

Customer-experienced rapid prototyping

NASA Astrophysics Data System (ADS)

Zhang, Lijuan; Zhang, Fu; Li, Anbo

2008-12-01

In order to describe accurately and comprehend quickly the perfect GIS requirements, this article will integrate the ideas of QFD (Quality Function Deployment) and UML (Unified Modeling Language), and analyze the deficiency of prototype development model, and will propose the idea of the Customer-Experienced Rapid Prototyping (CE-RP) and describe in detail the process and framework of the CE-RP, from the angle of the characteristics of Modern-GIS. The CE-RP is mainly composed of Customer Tool-Sets (CTS), Developer Tool-Sets (DTS) and Barrier-Free Semantic Interpreter (BF-SI) and performed by two roles of customer and developer. The main purpose of the CE-RP is to produce the unified and authorized requirements data models between customer and software developer.

Sticks and stones can break my bones but words can also hurt me: The relationship between customer verbal aggression and employee incivility.

PubMed

Walker, David D; van Jaarsveld, Danielle D; Skarlicki, Daniel P

2017-02-01

Customer service employees tend to react negatively to customer incivility by demonstrating incivility in return, thereby likely reducing customer service quality. Research, however, has yet to uncover precisely what customers do that results in employee incivility. Through transcript and computerized text analysis in a multilevel, multisource, mixed-method field study of customer service events (N = 434 events), we found that employee incivility can occur as a function of customer (a) aggressive words, (b) second-person pronoun use (e.g., you, your), (c) interruptions, and (d) positive emotion words. First, the positive association between customer aggressive words and employee incivility was more pronounced when the verbal aggression included second-person pronouns, which we label targeted aggression. Second, we observed a 2-way interaction between targeted aggression and customer interruptions such that employees demonstrated more incivility when targeted customer verbal aggression was accompanied by more (vs. fewer) interruptions. Third, this 2-way interaction predicting employee incivility was attenuated when customers used positive emotion words. Our results support a resource-based explanation, suggesting that customer verbal aggression consumes employee resources potentially leading to self-regulation failure, whereas positive emotion words from customers can help replenish employee resources that support self-regulation. The present study highlights the advantages of examining what occurs within customer-employee interactions to gain insight into employee reactions to customer incivility. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

A Data-Driven Approach to Reverse Engineering Customer Engagement Models: Towards Functional Constructs

PubMed Central

de Vries, Natalie Jane; Carlson, Jamie; Moscato, Pablo

2014-01-01

Online consumer behavior in general and online customer engagement with brands in particular, has become a major focus of research activity fuelled by the exponential increase of interactive functions of the internet and social media platforms and applications. Current research in this area is mostly hypothesis-driven and much debate about the concept of Customer Engagement and its related constructs remains existent in the literature. In this paper, we aim to propose a novel methodology for reverse engineering a consumer behavior model for online customer engagement, based on a computational and data-driven perspective. This methodology could be generalized and prove useful for future research in the fields of consumer behaviors using questionnaire data or studies investigating other types of human behaviors. The method we propose contains five main stages; symbolic regression analysis, graph building, community detection, evaluation of results and finally, investigation of directed cycles and common feedback loops. The ‘communities’ of questionnaire items that emerge from our community detection method form possible ‘functional constructs’ inferred from data rather than assumed from literature and theory. Our results show consistent partitioning of questionnaire items into such ‘functional constructs’ suggesting the method proposed here could be adopted as a new data-driven way of human behavior modeling. PMID:25036766

A data-driven approach to reverse engineering customer engagement models: towards functional constructs.

PubMed

de Vries, Natalie Jane; Carlson, Jamie; Moscato, Pablo

2014-01-01

Online consumer behavior in general and online customer engagement with brands in particular, has become a major focus of research activity fuelled by the exponential increase of interactive functions of the internet and social media platforms and applications. Current research in this area is mostly hypothesis-driven and much debate about the concept of Customer Engagement and its related constructs remains existent in the literature. In this paper, we aim to propose a novel methodology for reverse engineering a consumer behavior model for online customer engagement, based on a computational and data-driven perspective. This methodology could be generalized and prove useful for future research in the fields of consumer behaviors using questionnaire data or studies investigating other types of human behaviors. The method we propose contains five main stages; symbolic regression analysis, graph building, community detection, evaluation of results and finally, investigation of directed cycles and common feedback loops. The 'communities' of questionnaire items that emerge from our community detection method form possible 'functional constructs' inferred from data rather than assumed from literature and theory. Our results show consistent partitioning of questionnaire items into such 'functional constructs' suggesting the method proposed here could be adopted as a new data-driven way of human behavior modeling.

An Introduction to Intelligent Networks

DTIC Science & Technology

1994-02-01

customers in particular) to "specify a different geographic location for the call to terminate at. depending on the location of the calling customer ...corporate and military alike), with the promise also that they support affordable and dynamic reconfiguration. For example, as a domestic customer . I... relationship has an SCP serving a distribution of SSP elements to pnride wupport for calls that invoke IN functionality. And is in turn coatrolied and

Personal customizing exercise with a wearable measurement and control unit

PubMed Central

Wang, Zhihui; Kiryu, Tohru; Tamura, Naoki

2005-01-01

Background Recently, wearable technology has been used in various health-related fields to develop advanced monitoring solutions. However, the monitoring function alone cannot meet all the requirements of customizing machine-based exercise on an individual basis by relying on biosignal-based controls. We propose a new wearable unit design equipped with measurement and control functions to support the customization process. Methods The wearable unit can measure the heart rate and electromyogram signals during exercise performance and output workload control commands to the exercise machines. The workload is continuously tracked with exercise programs set according to personally customized workload patterns and estimation results from the measured biosignals by a fuzzy control method. Exercise programs are adapted by relying on a computer workstation, which communicates with the wearable unit via wireless connections. A prototype of the wearable unit was tested together with an Internet-based cycle ergometer system to demonstrate that it is possible to customize exercise on an individual basis. Results We tested the wearable unit in nine people to assess its suitability to control cycle ergometer exercise. The results confirmed that the unit could successfully control the ergometer workload and continuously support gradual changes in physical activities. Conclusion The design of wearable units equipped with measurement and control functions is an important step towards establishing a convenient and continuously supported wellness environment. PMID:15982425

Magnetic resonance imaging-three-dimensional printing technology fabricates customized scaffolds for brain tissue engineering

PubMed Central

Fu, Feng; Qin, Zhe; Xu, Chao; Chen, Xu-yi; Li, Rui-xin; Wang, Li-na; Peng, Ding-wei; Sun, Hong-tao; Tu, Yue; Chen, Chong; Zhang, Sai; Zhao, Ming-liang; Li, Xiao-hong

2017-01-01

Conventional fabrication methods lack the ability to control both macro- and micro-structures of generated scaffolds. Three-dimensional printing is a solid free-form fabrication method that provides novel ways to create customized scaffolds with high precision and accuracy. In this study, an electrically controlled cortical impactor was used to induce randomized brain tissue defects. The overall shape of scaffolds was designed using rat-specific anatomical data obtained from magnetic resonance imaging, and the internal structure was created by computer-aided design. As the result of limitations arising from insufficient resolution of the manufacturing process, we magnified the size of the cavity model prototype five-fold to successfully fabricate customized collagen-chitosan scaffolds using three-dimensional printing. Results demonstrated that scaffolds have three-dimensional porous structures, high porosity, highly specific surface areas, pore connectivity and good internal characteristics. Neural stem cells co-cultured with scaffolds showed good viability, indicating good biocompatibility and biodegradability. This technique may be a promising new strategy for regenerating complex damaged brain tissues, and helps pave the way toward personalized medicine. PMID:28553343

Fuel cells provide a revenue-generating solution to power quality problems

DOE Office of Scientific and Technical Information (OSTI.GOV)

King, J.M. Jr.

Electric power quality and reliability are becoming increasingly important as computers and microprocessors assume a larger role in commercial, health care and industrial buildings and processes. At the same time, constraints on transmission and distribution of power from central stations are making local areas vulnerable to low voltage, load addition limitations, power quality and power reliability problems. Many customers currently utilize some form of premium power in the form of standby generators and/or UPS systems. These include customers where continuous power is required because of health and safety or security reasons (hospitals, nursing homes, places of public assembly, air trafficmore » control, military installations, telecommunications, etc.) These also include customers with industrial or commercial processes which can`t tolerance an interruption of power because of product loss or equipment damage. The paper discusses the use of the PC25 fuel cell power plant for backup and parallel power supplies for critical industrial applications. Several PC25 installations are described: the use of propane in a PC25; the use by rural cooperatives; and a demonstration of PC25 technology using landfill gas.« less

Progressive Damage Analysis of Bonded Composite Joints

NASA Technical Reports Server (NTRS)

Leone, Frank A., Jr.; Girolamo, Donato; Davila, Carlos G.

2012-01-01

The present work is related to the development and application of progressive damage modeling techniques to bonded joint technology. The joint designs studied in this work include a conventional composite splice joint and a NASA-patented durable redundant joint. Both designs involve honeycomb sandwich structures with carbon/epoxy facesheets joined using adhesively bonded doublers.Progressive damage modeling allows for the prediction of the initiation and evolution of damage within a structure. For structures that include multiple material systems, such as the joint designs under consideration, the number of potential failure mechanisms that must be accounted for drastically increases the complexity of the analyses. Potential failure mechanisms include fiber fracture, intraply matrix cracking, delamination, core crushing, adhesive failure, and their interactions. The bonded joints were modeled using highly parametric, explicitly solved finite element models, with damage modeling implemented via custom user-written subroutines. Each ply was discretely meshed using three-dimensional solid elements. Layers of cohesive elements were included between each ply to account for the possibility of delaminations and were used to model the adhesive layers forming the joint. Good correlation with experimental results was achieved both in terms of load-displacement history and the predicted failure mechanism(s).

Financial and environmental impacts of new technologies in the energy sector

NASA Astrophysics Data System (ADS)

Duthu, Ray Charles, III

Energy industries (generation, transmission and distribution of fuels and electricity) have a long history as the key elements of the US energy economy and have operated within a mostly consistent niche in our society for the past century. However, varieties of interrelated drivers are forcing changes to these industries' business practices, relationship to their customers, and function in society. In the electric utility industry, the customer is moving towards acting as a fuller partner in the energy economy: buying, selling, and dispatching its demand according to its own incentives. Natural gas exploration and production has long operated out in rural areas farther from public concerns or regulations, but now, due to hydraulic fracturing, new exploration is occurring in more urbanized, developed regions of the country and is creating significant public concern. For these industries, the challenges to their economic development and to improvements to the energy sector are not necessarily technological; but are social, business, and policy problems. This dissertation seeks to understand and design towards these issues by building economic and life cycle assessment models that quantify value, potential monetization, and the potential difference between the monetization and value for two new technologies: customer-owned distributed generation systems and integrated development plans with pipeline water transport in hydraulically fractured oil and gas fields. An inclusive business model of a generic customer in Fort Collins, Co and its surrounding utilities demonstrates that traditional utility rates provide customers with incentives that encourage over-monetization of a customer's distributed generation resource at the expense of the utilities. Another model which compares customer behavior incented by traditional rates in three New England cities with the behavior incented through a real-time pricing market corroborates this conclusion. Daily customer load peak-shaving is shown to have a negligible and unreliable value in reducing the average cost of electricity and in some cases can increase these costs. These models support the hypothesis that distributed generation systems provide much greater value when operated during a few significant electricity price events than according to a daily cycle. New business practices which foster greater cooperation between customers and utilities, such as a real-time price market with a higher fidelity price signal, reconnect distributed generation's potential monetization to its value in the marketplace. These new business models are required to ensure that these new technologies are integrated into the electric grid and into the energy market in such a way that all of the market participants are interested and invested stakeholders. The truck transport of water associated with hydraulic fracturing creates significant local costs. A life cycle analysis of a hypothetical oil and gas field generic to the northern Colorado Denver-Julesburg basin quantifies the economic, environmental, and social costs associated with truck transport and compares these results with water pipeline systems. A literature review of incident data demonstrates that pipelines historically have spilled less hazardous material and caused fewer injuries and fatalities than truck transport systems. The life cycle analysis demonstrates that pipeline systems also emit less pollutants and cause less local road damage than comparable trucking systems. Pipeline systems are shown to be superior to trucking systems across all the metrics considered in this project. In each of these domains, this research has developed expanded-scope models of these new technologies and systems to quantify the tradeoffs that are present between monetization, environment, and economic value. The results point towards those business models, policies, and management practices that enable the development of more equitable, efficient, and sustainable energy systems.

High-density plasma etching of III-nitrides: Process development, device applications and damage remediation

NASA Astrophysics Data System (ADS)

Singh, Rajwinder

Plasma-assisted etching is a key technology for III-nitride device fabrication. The inevitable etch damage resulting from energetic pattern transfer is a challenge that needs to be addressed in order to optimize device performance and reliability. This dissertation focuses on the development of a high-density inductively-coupled plasma (ICP) etch process for III-nitrides, the demonstration of its applicability to practical device fabrication using a custom built ICP reactor, and development of techniques for remediation of etch damage. A chlorine-based standard dry etch process has been developed and utilized in fabrication of a number of electronic and optoelectronic III-nitride devices. Annealing studies carried out at 700°C have yielded the important insight that the annealing time necessary for making good-quality metal contacts to etch processed n-GaN is very short (<30 sec), comparable with the annealing times necessary for dopant activation of p-GaN films and provides an opportunity for streamlining process flow. Plasma etching degrades contact quality on n-GaN films and this degradation has been found to increase with the rf bias levels (ion energies) used, most notably in films with higher doping levels. Immersion in 1:1 mixture of hydrochloric acid and de-ionized water, prior to metallization, removes some of the etch damage and is helpful in recovering contact quality. In-situ treatment consisting of a slow ramp-down of rf bias at the end of the etch is found to achieve the same effect as the ex-situ treatment. This insitu technique is significantly advantageous in a large-scale production environment because it eliminates a process step, particularly one involving treatment in hydrochloric acid. ICP equipment customization for scaling up the process to full 2-inch wafer size is described. Results on etching of state of the art 256 x 256 AlGaN focal plane arrays of ultraviolet photodetectors are reported, with excellent etch uniformity over the wafer area.

DSMS Operations Concept

NASA Technical Reports Server (NTRS)

Spradlin, G.

2000-01-01

The concept provides an overview of operational roles and responsibilities in a service system environment. It describes changed and new interfaces between the customers and the service system, and variations on these interfaces as a function of the level of support required by the customer.

Tourism guide cloud service quality: What actually delights customers?

PubMed

Lin, Shu-Ping; Yang, Chen-Lung; Pi, Han-Chung; Ho, Thao-Minh

2016-01-01

The emergence of advanced IT and cloud services has beneficially supported the information-intensive tourism industry, simultaneously caused extreme competitions in attracting customers through building efficient service platforms. On response, numerous nations have implemented cloud platforms to provide value-added sightseeing information and personal intelligent service experiences. Despite these efforts, customers' actual perspectives have yet been sufficiently understood. To bridge the gap, this study attempts to investigate what aspects of tourism cloud services actually delight customers' satisfaction and loyalty. 336 valid survey questionnaire answers were analyzed using structural equation modeling method. The results prove positive impacts of function quality, enjoyment, multiple visual aids, and information quality on customers' satisfaction as well as of enjoyment and satisfaction on use loyalty. The findings hope to provide helpful references of customer use behaviors for enhancing cloud service quality in order to achieve better organizational competitiveness.

Speed-Selector Guard For Machine Tool

NASA Technical Reports Server (NTRS)

Shakhshir, Roda J.; Valentine, Richard L.

1992-01-01

Simple guardplate prevents accidental reversal of direction of rotation or sudden change of speed of lathe, milling machine, or other machine tool. Custom-made for specific machine and control settings. Allows control lever to be placed at only one setting. Operator uses handle to slide guard to engage or disengage control lever. Protects personnel from injury and equipment from damage occurring if speed- or direction-control lever inadvertently placed in wrong position.

Customer-focused service management: driving change up the hierarchy and outward.

PubMed

Schonberger, R J

1998-02-01

The modern management revolution, which has quality and customer service at its core, is incomplete. The customer mindset is strongest in frontline operations and growing in support functions. Too often, however, the strategic hierarchy has been left out--still taking its marching orders from the skittish, myopic financial community centered in Wall Street, the City of London, and other meccas of money. Superior organizations, largely in manufacturing thus far, are taking steps toward correcting this deficiency. Their approach is to reorient using customer-focused principles that are attractive to all parties, including external partners.

Indocyanine Green Fluorescence to Evaluate Nasoseptal Flap Viability in Endoscopic Endonasal Cranial Base Surgery.

PubMed

Kerr, Edward E; Jamshidi, Ali; Carrau, Ricardo L; Campbell, Raewyn G; Filho, Leo F Ditzel; Otto, Bradley A; Prevedello, Daniel M

2017-10-01

Objectives  The pedicled nasoseptal flap (NSF) has dramatically reduced postoperative cerebrospinal fluid leakage following endoscopic endonasal approach (EEA) surgery. Although rare, its arterial supply may be damaged during harvest or may be preoperatively damaged for numerous reasons. Early recognition permits harvesting a contralateral flap before sacrificing its pedicle as part of the surgical exposure or use of an alternative flap. Design  Technical feasibility study and case series. Setting  Tertiary care university-associated medical center. Participants  Five patients requiring an EEA with NSF reconstruction. Main Outcome Measures  During NSF harvest, intravenous indocyanine green (IVICG) was administered, and a customized endoscopic system was used to visualize the emerging fluorescence. At the end of each case, just before final positioning of the NSF, additional IVICG was administered, and the custom endoscope was again introduced to evaluate fluorescence. Results  In four patients, the entire NSF fluoresced brightly with IVICG on initial harvest and before final positioning. One patient showed heterogeneous fluorescence of the pedicle and distal parts of the NSF at both stages. All NSFs healed well without complication. Conclusion  IVICG facilitates real-time evaluation NSF's arterial supply. This may provide early recognition of arterial compromise, allowing the harvest of alternate flaps or modification of surgery.

ERCC1 and RRM1: ready for prime time?

PubMed

Besse, Benjamin; Olaussen, Ken A; Soria, Jean-Charles

2013-03-10

The quest for markers of sensitivity to cytotoxic agents has been ongoing for decades. In non-small-cell lung cancer, platinum compounds represent the cornerstone of systemic therapy. They target DNA and induce damage that cancer cells struggle to overcome. Somatic excision repair cross-complementing rodent repair deficiency, complementation group 1 (ERCC1), and ribonucleotide reductase M1 (RRM1) expression levels have been extensively explored as markers of DNA repair capacity in tumor cells. Although low ERCC1 and/or RRM1 expression is generally associated with sensitivity to platinum, the results published in retrospective and prospective studies are not always consistent. Against this background, we will examine in this review the function of these two biomarkers as well as the tools available for their assessment and the associated technical issues. Their prognostic and predictive values will be summarized and considered in terms of customizing systemic therapy according to biomarker (ERCC1 and RRM1) expression levels. We will also discuss why the use of both markers should at this point be restricted to clinical research and underline that functional readouts of DNA repair will help boost future strategies for biomarker discovery in the field.

ISO 9000 and/or Systems Engineering Capability Maturity Model?

NASA Technical Reports Server (NTRS)

Gholston, Sampson E.

2002-01-01

For businesses and organizations to remain competitive today they must have processes and systems in place that will allow them to first identify customer needs and then develop products/processes that will meet or exceed the customers needs and expectations. Customer needs, once identified, are normally stated as requirements. Designers can then develop products/processes that will meet these requirements. Several functions, such as quality management and systems engineering management are used to assist product development teams in the development process. Both functions exist in all organizations and both have a similar objective, which is to ensure that developed processes will meet customer requirements. Are efforts in these organizations being duplicated? Are both functions needed by organizations? What are the similarities and differences between the functions listed above? ISO 9000 is an international standard of goods and services. It sets broad requirements for the assurance of quality and for management's involvement. It requires organizations to document the processes and to follow these documented processes. ISO 9000 gives customers assurance that the suppliers have control of the process for product development. Systems engineering can broadly be defined as a discipline that seeks to ensure that all requirements for a system are satisfied throughout the life of the system by preserving their interrelationship. The key activities of systems engineering include requirements analysis, functional analysis/allocation, design synthesis and verification, and system analysis and control. The systems engineering process, when followed properly, will lead to higher quality products, lower cost products, and shorter development cycles. The System Engineering Capability Maturity Model (SE-CMM) will allow companies to measure their system engineering capability and continuously improve those capabilities. ISO 9000 and SE-CMM seem to have a similar objective, which is to document the organization's processes and certify to potential customers the capability of a supplier to control the processes that determine the quality of the product or services being produced. The remaining sections of this report examine the differences and similarities between ISO 9000 and SE-CMM and make recommendations for implementation.

Functional customization: Value creation by individual storage elements in the car interior.

PubMed

Wagner, A-S; Kilincsoy, Ü; Reitmeir, M; Vink, P

2016-07-27

Mobility demands change due to differing life stages of car owners. Car sharing and retail markets seldom offer a possibility for customization by the user in contrast to the freedom of choice of an initial owner of a car. The value creation of functional customization is investigated. Prior to a test with a concept design, different use case scenarios of car drivers are identified regarding the preferred storage location of their personal belongings in different situations. A study with 70 subjects was conducted in order to evaluate the value added by functional customization. Storage habits of users were investigated in general and in relation to a concept design offering the possibility for flexible storage. Smartphones, supplies, beverages and wallets were the most relevant belongings in all driving situations (commuting, leisure, vacation and special occasions) complemented by sports equipment. Smartphones and other valuables are stored within reach and sight of the user. The emotional responses, recorded before and after the test, subdivided in attraction, hope and joy indicated positive feedback. The ease of use and the design proved to be crucial product characteristics of individually adaptable storage solutions. Positive emotions are contributing factors for a user's purchasing decision.

Evolview v2: an online visualization and management tool for customized and annotated phylogenetic trees.

PubMed

He, Zilong; Zhang, Huangkai; Gao, Shenghan; Lercher, Martin J; Chen, Wei-Hua; Hu, Songnian

2016-07-08

Evolview is an online visualization and management tool for customized and annotated phylogenetic trees. It allows users to visualize phylogenetic trees in various formats, customize the trees through built-in functions and user-supplied datasets and export the customization results to publication-ready figures. Its 'dataset system' contains not only the data to be visualized on the tree, but also 'modifiers' that control various aspects of the graphical annotation. Evolview is a single-page application (like Gmail); its carefully designed interface allows users to upload, visualize, manipulate and manage trees and datasets all in a single webpage. Developments since the last public release include a modern dataset editor with keyword highlighting functionality, seven newly added types of annotation datasets, collaboration support that allows users to share their trees and datasets and various improvements of the web interface and performance. In addition, we included eleven new 'Demo' trees to demonstrate the basic functionalities of Evolview, and five new 'Showcase' trees inspired by publications to showcase the power of Evolview in producing publication-ready figures. Evolview is freely available at: http://www.evolgenius.info/evolview/. © The Author(s) 2016. Published by Oxford University Press on behalf of Nucleic Acids Research.

19 CFR 115.3 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-04-01

....S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY CARGO CONTAINER AND ROAD VEHICLE CERTIFICATION PURSUANT TO INTERNATIONAL CUSTOMS CONVENTIONS General § 115.3... carry out the functions of this part and which he designates to certify containers and road vehicles for...

19 CFR 115.3 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-04-01

....S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY CARGO CONTAINER AND ROAD VEHICLE CERTIFICATION PURSUANT TO INTERNATIONAL CUSTOMS CONVENTIONS General § 115.3... carry out the functions of this part and which he designates to certify containers and road vehicles for...

19 CFR 115.3 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-04-01

....S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY CARGO CONTAINER AND ROAD VEHICLE CERTIFICATION PURSUANT TO INTERNATIONAL CUSTOMS CONVENTIONS General § 115.3... carry out the functions of this part and which he designates to certify containers and road vehicles for...

19 CFR 115.3 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-04-01

....S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY CARGO CONTAINER AND ROAD VEHICLE CERTIFICATION PURSUANT TO INTERNATIONAL CUSTOMS CONVENTIONS General § 115.3... carry out the functions of this part and which he designates to certify containers and road vehicles for...

19 CFR 115.3 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-04-01

....S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY CARGO CONTAINER AND ROAD VEHICLE CERTIFICATION PURSUANT TO INTERNATIONAL CUSTOMS CONVENTIONS General § 115.3... carry out the functions of this part and which he designates to certify containers and road vehicles for...

18 CFR 367.9160 - Account 916, Miscellaneous sales expenses.

Code of Federal Regulations, 2010 CFR

2010-04-01

... work not assigned to specific functions. (2) Special analysis of customer accounts and other statistical work for sales purposes not a part of the regular customer accounting and billing routine. (3... those chargeable to account 913, Advertising expenses (§ 367.9130). ...

Ballistic Limit Equation for Single Wall Titanium

NASA Technical Reports Server (NTRS)

Ratliff, J. M.; Christiansen, Eric L.; Bryant, C.

2009-01-01

Hypervelocity impact tests and hydrocode simulations were used to determine the ballistic limit equation (BLE) for perforation of a titanium wall, as a function of wall thickness. Two titanium alloys were considered, and separate BLEs were derived for each. Tested wall thicknesses ranged from 0.5mm to 2.0mm. The single-wall damage equation of Cour-Palais [ref. 1] was used to analyze the Ti wall's shielding effectiveness. It was concluded that the Cour-Palais single-wall equation produced a non-conservative prediction of the ballistic limit for the Ti shield. The inaccurate prediction was not a particularly surprising result; the Cour-Palais single-wall BLE contains shield material properties as parameters, but it was formulated only from tests of different aluminum alloys. Single-wall Ti shield tests were run (thicknesses of 2.0 mm, 1.5 mm, 1.0 mm, and 0.5 mm) on Ti 15-3-3-3 material custom cut from rod stock. Hypervelocity impact (HVI) tests were used to establish the failure threshold empirically, using the additional constraint that the damage scales with impact energy, as was indicated by hydrocode simulations. The criterion for shield failure was defined as no detached spall from the shield back surface during HVI. Based on the test results, which confirmed an approximately energy-dependent shield effectiveness, the Cour-Palais equation was modified.

Functional vision in children with perinatal brain damage.

PubMed

Alimović, Sonja; Jurić, Nikolina; Bošnjak, Vlatka Mejaški

2014-09-01

Many authors have discussed the effects of visual stimulations on visual functions, but there is no research about the effects on using vision in everyday activities (i.e. functional vision). Children with perinatal brain damage can develop cerebral visual impairment with preserved visual functions (e.g. visual acuity, contrast sensitivity) but poor functional vision. Our aim was to discuss the importance of assessing and stimulating functional vision in children with perinatal brain damage. We assessed visual functions (grating visual acuity, contrast sensitivity) and functional vision (the ability of maintaining visual attention and using vision in communication) in 99 children with perinatal brain damage and visual impairment. All children were assessed before and after the visual stimulation program. Our first assessment results showed that children with perinatal brain damage had significantly more problems in functional vision than in basic visual functions. During the visual stimulation program both variables of functional vision and contrast sensitivity improved significantly, while grating acuity improved only in 2.7% of children. We also found that improvement of visual attention significantly correlated to improvement on all other functions describing vision. Therefore, functional vision assessment, especially assessment of visual attention is indispensable in early monitoring of child with perinatal brain damage.

A conjoint analysis to consumer choice in Brazil: Defining device attributes for recognizing customized foods characteristics.

PubMed

Calegari, L P; Barbosa, J; Marodin, G A; Fettermann, D C

2018-07-01

the availability of information about food products may be an essential factor in the consumer's value perception in their purchasing decision. As the food product becomes personalized, the customization of this information becomes complex due to the possible combinations of product components. The use of smart technology in devices is one way to provide customers with customized food information. In the following research five attributes were identified in the composition of these devices: (A) portability; (B) precision; (C) diet customization; (D) food quality analysis; and (E) price. This study aims to identify the appropriate combination of possible functionalities or attributes that must be present in a device in order to detect the food composition of customized foods and their relation to market characteristics. One experiment used fractional factorial project to present the attributes in the form of scenarios following the Choice-Based Conjoint Analysis (CBCA) method. The data collection was done using survey methodology, through online questionnaire, with some 303 Brazilian respondents. So, the Logistic Regression was applied to data analysis. The moderating variables-gender, age, gluten restriction, lactose restriction and other restrictions-were also added to verify potential interactions with the primary attributes. From the results obtained, it was possible to observe higher significance for the primary attributes of diet personalization and quality food analyzes function. Our study contributes to the literature by enhancing the understanding about what the attributes should be in a technological device that has the purpose of recognizing food characteristics and is capable of generating information about customized food products. Furthermore, this device can enabler the production of mass customized food with the nutritional labels for each possible combination. Copyright © 2018 Elsevier Ltd. All rights reserved.

Passive-dynamic ankle-foot orthosis replicates soleus but not gastrocnemius muscle function during stance in gait: Insights for orthosis prescription.

PubMed

Arch, Elisa S; Stanhope, Steven J; Higginson, Jill S

2016-10-01

Passive-dynamic ankle-foot orthosis characteristics, including bending stiffness, should be customized for individuals. However, while conventions for customizing passive-dynamic ankle-foot orthosis characteristics are often described and implemented in clinical practice, there is little evidence to explain their biomechanical rationale. To develop and combine a model of a customized passive-dynamic ankle-foot orthosis with a healthy musculoskeletal model and use simulation tools to explore the influence of passive-dynamic ankle-foot orthosis bending stiffness on plantar flexor function during gait. Dual case study. The customized passive-dynamic ankle-foot orthosis characteristics were integrated into a healthy musculoskeletal model available in OpenSim. Quasi-static forward dynamic simulations tracked experimental gait data under several passive-dynamic ankle-foot orthosis conditions. Predicted muscle activations were calculated through a computed muscle control optimization scheme. Simulations predicted that the passive-dynamic ankle-foot orthoses substituted for soleus but not gastrocnemius function. Induced acceleration analyses revealed the passive-dynamic ankle-foot orthosis acts like a uniarticular plantar flexor by inducing knee extension accelerations, which are counterproductive to natural knee kinematics in early midstance. These passive-dynamic ankle-foot orthoses can provide plantar flexion moments during mid and late stance to supplement insufficient plantar flexor strength. However, the passive-dynamic ankle-foot orthoses negatively influenced knee kinematics in early midstance. Identifying the role of passive-dynamic ankle-foot orthosis stiffness during gait provides biomechanical rationale for how to customize passive-dynamic ankle-foot orthoses for patients. Furthermore, these findings can be used in the future as the basis for developing objective prescription models to help drive the customization of passive-dynamic ankle-foot orthosis characteristics. © The International Society for Prosthetics and Orthotics 2015.

Exploring the effects of individual customer incivility encounters on employee incivility: the moderating roles of entity (in)civility and negative affectivity.

PubMed

Walker, David D; van Jaarsveld, Danielle D; Skarlicki, Daniel P

2014-01-01

Incivility between customers and employees is common in many service organizations. These encounters can have negative outcomes for employees, customers, and the organization. To date, researchers have tended to study incivility as an aggregated and accumulated phenomenon (entity perspective). In the present study, we examined incivility as it occurs during a specific service encounter (event perspective) alongside the entity perspective. Using a mixed-method multilevel field study of customer service interactions, we show that individual customer incivility encounters (i.e., events) trigger employee incivility as a function of the employee's overall accumulated impression of the (in)civility in his or her customer interactions, such that the effects are more pronounced among employees who generally perceive their customer interactions to be more versus less civil. We also find that these interactive effects occur only among employees who are lower (vs. higher) in negative affectivity. Our results show that, in order to expand the understanding of customer incivility, it is important to study the incivility encounter, the social context in which negative customer interactions occur, and individual differences. PsycINFO Database Record (c) 2014 APA, all rights reserved

A characterization of the current communication patterns in Danish community pharmacies - an observational study.

PubMed

Kaae, Susanne; Mygind, Anna; Saleem, Sahdia

2013-01-01

Community pharmacies have been trying to expand their core function by counseling customers at the counter. This has been challenging given that customers' interest in receiving counseling may be limited. To characterize the current pharmacist-customer communication patterns to inform future studies and models of communication. Non-participant structured observations based on the works of Stevenson et al. were conducted. A random selection of one hundred encounters in five pharmacies in Denmark was obtained. Type of encounter, type of medicine purchased and the age and gender of the customer were observed, and associations between the parameters identified. Customers initiated 13% of the dialogs, whereas 60% were initiated by the staff (with 38% of the customers declining the offer). 26% of the encounters saw no communication about the medicine. The customers' level of interest in counseling varied significantly and more with the type of medicine purchased than the level of encouragement from the staff to initiate a dialog. The customers' interest in dialog, in contrast with the staff behavior, depended significantly on age and gender. Customers' interest in counseling varies significantly. Pharmacy staff should take this into consideration when trying to optimize communication. Copyright © 2013 Elsevier Inc. All rights reserved.

GEND planning report

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

The Three Mile Island (TMI) Unit 2 accident on March 28, 1979 was and is of great concern to the nuclear industry; electric power generating companies and their customers, regulatory and other government agencies, the entire nuclear community, and to the country as a whole. While the accident resulted in only limited external plant radiation exposure, the plant itself suffered extensive damage with high radiation contamination within the reactor and auxiliary system facilities. The GEND Planning Report for cleanup activities at TMI-2 covers the areas of: instrumentation and electrical equipment survivability; fission product transport; decontamination/radiation dose reduction technology; data bankmore » organization and sample archive facility; characterization of primary system pressure boundary and mechanical components; core damage assessment; and fuel handling, removal, examination and disposal.« less

78 FR 60880 - Statement of Organization, Functions, and Delegations of Authority

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-02

... Commissioner (KFB) Division of Business and Resource Management (KFB2) Division of Customer Communications... Systems, Division of Business and Resource Management, Division of Customer Communications, Division of...: The Division of Management Services to the Division of Business and Resource Management; the Division...

29 CFR 779.306 - Leased departments not separate establishments.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., determines the pricing policy, bills the customers, passes on customers' credit, receives payments due, handles complaints, determines the personnel policies, and performs other functions as well. In such... LABOR STATEMENTS OF GENERAL POLICY OR INTERPRETATION NOT DIRECTLY RELATED TO REGULATIONS THE FAIR LABOR...

Zygomatico-maxillary Reconstruction with Computer-aided Manufacturing of a Free DCIA Osseous Flap and Intraoral Anastomoses.

PubMed

Roy, Andrée-Anne; Efanov, Johnny I; Mercier-Couture, Geneviève; Chollet, André; Borsuk, Daniel E

2017-02-01

Craniomaxillofacial reconstruction using virtual surgical planning, computer-aided manufacturing, and new microsurgical techniques optimizes patient-specific and defect-directed reconstruction. A 3D customized free deep circumflex iliac artery (DCIA) flap with intraoral anastomoses was performed on a 23-year-old man with a posttraumatic right zygomatico-maxillary defect with failure of alloplastic implant reconstruction. An osseous iliac crest flap was sculpted based on a customized 3D model of the mirror image of the patient's unaffected side to allow for perfect fit to the zygomatico-maxillary defect. An intraoral dissection of the facial artery and vein was performed within the right cheek mucosa and allowed for end-to-end microvascular anastomoses. 3D preoperative planning and customized free DCIA osseous flap combined with an intraoral microsurgical technique provided restoration of facial esthetics and function without visible scars. In cases where zygomatico-malar reconstruction by alloplastic material fails, a customized free DCIA osseous flap can be designed by virtual surgical planning to restore facial appearance and function.

Customized Body Mapping to Facilitate the Ergonomic Design of Sportswear.

PubMed

Cao, Mingliang; Li, Yi; Guo, Yueping; Yao, Lei; Pan, Zhigeng

2016-01-01

A successful high-performance sportswear design that considers human factors should result in a significant increase in thermal comfort and reduce energy loss. The authors describe a body-mapping approach that facilitates the effective ergonomic design of sportswear. Their general framework can be customized based on the functional requirements of various sports and sportswear, the desired combination and selection of mapping areas for the human body, and customized quantitative data distribution of target physiological indicators.

Assessment of a virtual functional prototyping process for the rapid manufacture of passive-dynamic ankle-foot orthoses.

PubMed

Schrank, Elisa S; Hitch, Lester; Wallace, Kevin; Moore, Richard; Stanhope, Steven J

2013-10-01

Passive-dynamic ankle-foot orthosis (PD-AFO) bending stiffness is a key functional characteristic for achieving enhanced gait function. However, current orthosis customization methods inhibit objective premanufacture tuning of the PD-AFO bending stiffness, making optimization of orthosis function challenging. We have developed a novel virtual functional prototyping (VFP) process, which harnesses the strengths of computer aided design (CAD) model parameterization and finite element analysis, to quantitatively tune and predict the functional characteristics of a PD-AFO, which is rapidly manufactured via fused deposition modeling (FDM). The purpose of this study was to assess the VFP process for PD-AFO bending stiffness. A PD-AFO CAD model was customized for a healthy subject and tuned to four bending stiffness values via VFP. Two sets of each tuned model were fabricated via FDM using medical-grade polycarbonate (PC-ISO). Dimensional accuracy of the fabricated orthoses was excellent (average 0.51 ± 0.39 mm). Manufacturing precision ranged from 0.0 to 0.74 Nm/deg (average 0.30 ± 0.36 Nm/deg). Bending stiffness prediction accuracy was within 1 Nm/deg using the manufacturer provided PC-ISO elastic modulus (average 0.48 ± 0.35 Nm/deg). Using an experimentally derived PC-ISO elastic modulus improved the optimized bending stiffness prediction accuracy (average 0.29 ± 0.57 Nm/deg). Robustness of the derived modulus was tested by carrying out the VFP process for a disparate subject, tuning the PD-AFO model to five bending stiffness values. For this disparate subject, bending stiffness prediction accuracy was strong (average 0.20 ± 0.14 Nm/deg). Overall, the VFP process had excellent dimensional accuracy, good manufacturing precision, and strong prediction accuracy with the derived modulus. Implementing VFP as part of our PD-AFO customization and manufacturing framework, which also includes fit customization, provides a novel and powerful method to predictably tune and precisely manufacture orthoses with objectively customized fit and functional characteristics.

Fundamental performance differences between CMOS and CCD imagers: part III

NASA Astrophysics Data System (ADS)

Janesick, James; Pinter, Jeff; Potter, Robert; Elliott, Tom; Andrews, James; Tower, John; Cheng, John; Bishop, Jeanne

2009-08-01

This paper is a status report on recent scientific CMOS imager developments since when previous publications were written. Focus today is being given on CMOS design and process optimization because fundamental problems affecting performance are now reasonably well understood. Topics found in this paper include discussions on a low cost custom scientific CMOS fabrication approach, substrate bias for deep depletion imagers, near IR and x-ray point-spread performance, custom fabricated high resisitivity epitaxial and SOI silicon wafers for backside illuminated imagers, buried channel MOSFETs for ultra low noise performance, 1 e- charge transfer imagers, high speed transfer pixels, RTS/ flicker noise versus MOSFET geometry, pixel offset and gain non uniformity measurements, high S/N dCDS/aCDS signal processors, pixel thermal dark current sources, radiation damage topics, CCDs fabricated in CMOS and future large CMOS imagers planned at Sarnoff.

Alkylation Damage by Lipid Electrophiles Targets Functional Protein Systems*

PubMed Central

Codreanu, Simona G.; Ullery, Jody C.; Zhu, Jing; Tallman, Keri A.; Beavers, William N.; Porter, Ned A.; Marnett, Lawrence J.; Zhang, Bing; Liebler, Daniel C.

2014-01-01

Protein alkylation by reactive electrophiles contributes to chemical toxicities and oxidative stress, but the functional impact of alkylation damage across proteomes is poorly understood. We used Click chemistry and shotgun proteomics to profile the accumulation of proteome damage in human cells treated with lipid electrophile probes. Protein target profiles revealed three damage susceptibility classes, as well as proteins that were highly resistant to alkylation. Damage occurred selectively across functional protein interaction networks, with the most highly alkylation-susceptible proteins mapping to networks involved in cytoskeletal regulation. Proteins with lower damage susceptibility mapped to networks involved in protein synthesis and turnover and were alkylated only at electrophile concentrations that caused significant toxicity. Hierarchical susceptibility of proteome systems to alkylation may allow cells to survive sublethal damage while protecting critical cell functions. PMID:24429493

Disaster planning and mitigation technologies, interim technology inventory report: Report {number_sign}2

DOE Office of Scientific and Technical Information (OSTI.GOV)

Oggerino, J.; Rabinowitz, M.

1998-06-01

Natural and person-caused disasters are increasing in frequency and magnitude, and these disasters are taking an ever increasing economic and personal toll. This report identifies technologies that can help utilities, their customers, and their communities cope with disasters. Each year, 10,000 violent thunderstorms, 5,000 floods, and 1,000 tornadoes strike the US. These and other natural events have cost at least $8 billion per year over the last 30 years, and the annual costs are increasing rapidly. In 1996, the US experienced twice the yearly average of declared disasters than in the previous twenty years. Damage from Hurricane Andrew and themore » Northridge earthquake resulted in losses of $30 and $25 billion respectively. As a result of these and other costly disasters, utilities are losing business and commercial customers. In response, federal, state, and local organizations have steeped up efforts to deploy mitigation technologies and techniques and business recovery support. A task within the EPRI Disaster Planning and Mitigation Technologies (DP and MT) Target seeks to identify technologies that can help utilities and their customers prepare for and recover from natural disasters. This report provides concise and directed product information that can help member utilities and the communities they serve to plan for, mitigate, and recover quickly from natural and person-caused disasters. This will enable them to retain customers and reduce revenue losses.« less

An overview of flywheel energy systems with HTS bearings

NASA Astrophysics Data System (ADS)

Wolsky, A. M.

2002-05-01

Passive magnetic bearings incorporating permanent magnets and ReBaCuO, together with carbon fibre, offer the possibility of increasing the stored, volumetric energy density of FES and unprecedentedly low idling loss of FES. Its stored energy need only satisfy customers' needs for the time it takes to bring on conventional 'back-up'. The FES itself must come up to power quickly enough to avoid any disruption in the customer's operation (e.g., continuous industrial processes involving fragile materials, for example paper forming). Such customers do not care about the price of electricity nearly as much as they care about not ruining their product, damaging their machines or having 'clean ups' that stop or slow output. Firms that engage in electronic commerce and/or telecommunications also value uninterruptible power. Another set of potential customers (construction, electric railroads) may wish to avoid fluctuations in their electrical supply or they may wish to avoid causing harm to others who may hold them liable for poor power quality. Finally, real time prices (e.g., every 15 s) and real time commands, disseminated via internet, and distributed storage might enable reduced system generation costs. Generators and FES makers would have to cooperate to make this feasible. Now, the central techno-economic challenge is to build a high-power, low-loss motor generator that reaches full power in a very short time.

A study of material damping in large space structures

NASA Technical Reports Server (NTRS)

Highsmith, A. L.; Allen, D. H.

1989-01-01

A constitutive model was developed for predicting damping as a function of damage in continuous fiber reinforced laminated composites. The damage model is a continuum formulation, and uses internal state variables to quantify damage and its subsequent effect on material response. The model is sensitive to the stacking sequence of the laminate. Given appropriate baseline data from unidirectional material, and damping as a function of damage in one crossply laminate, damage can be predicted as a function of damage in other crossply laminates. Agreement between theory and experiment was quite good. A micromechanics model was also developed for examining the influence of damage on damping. This model explicitly includes crack surfaces. The model provides reasonable predictions of bending stiffness as a function of damage. Damping predictions are not in agreement with the experiment. This is thought to be a result of dissipation mechanisms such as friction, which are not presently included in the analysis.

A Survey of Visualization Tools Assessed for Anomaly-Based Intrusion Detection Analysis

DTIC Science & Technology

2014-04-01

objective? • What vulnerabilities exist in the target system? • What damage or other consequences are likely? • What exploit scripts or other attack...languages C, R, and Python; no response capabilities. JUNG https://blogs.reucon.com/asterisk- java /tag/visualization/ Create custom layouts and can...annotate graphs, links, nodes with any Java data type. Must be familiar with coding in Java to call the routines; no monitoring or response

Exponential Increase in Relative Biological Effectiveness Along Distal Edge of a Proton Bragg Peak as Measured by Deoxyribonucleic Acid Double-Strand Breaks

PubMed Central

Cuaron, John J.; Chang, Chang; Lovelock, Michael; Higginson, Daniel S.; Mah, Dennis; Cahlon, Oren; Powell, Simon

2016-01-01

Purpose To quantify the relative biological effectiveness (RBE) of the distal edge of the proton Bragg peak, using an in vitro assay of DNA double-strand breaks (DSBs). Methods and Materials U2OS cells were irradiated within the plateau of a spread-out Bragg peak and at each millimeter position along the distal edge using a custom slide holder, allowing for simultaneous measurement of physical dose. A reference radiation signal was generated using photons. The DNA DSBs at 3 hours (to assess for early damage) and at 24 hours (to assess for residual damage and repair) after irradiation were measured using the γH2AX assay and quantified via flow cytometry. Results were confirmed with clonogenic survival assays. A detailed map of the RBE as a function of depth along the Bragg peak was generated using γH2AX measurements as a biological endpoint. Results At 3 hours after irradiation, DNA DSBs were higher with protons at every point along the distal edge compared with samples irradiated with photons to similar doses. This effect was even more pronounced after 24 hours, indicating that the impact of DNA repair is less after proton irradiation relative to photons. The RBE demonstrated an exponential increase as a function of depth and was measured to be as high as 4.0 after 3 hours and as high as 6.0 after 24 hours. When the RBE-corrected dose was plotted as a function of depth, the peak effective dose was extended 2-3 mm beyond what would be expected with physical measurement. Conclusions We generated a highly comprehensive map of the RBE of the distal edge of the Bragg peak, using a direct assay of DNA DSBs in vitro. Our data show that the RBE of the distal edge increases with depth and is significantly higher than previously reported estimates. PMID:27084629

Exponential Increase in Relative Biological Effectiveness Along Distal Edge of a Proton Bragg Peak as Measured by Deoxyribonucleic Acid Double-Strand Breaks.

PubMed

Cuaron, John J; Chang, Chang; Lovelock, Michael; Higginson, Daniel S; Mah, Dennis; Cahlon, Oren; Powell, Simon

2016-05-01

To quantify the relative biological effectiveness (RBE) of the distal edge of the proton Bragg peak, using an in vitro assay of DNA double-strand breaks (DSBs). U2OS cells were irradiated within the plateau of a spread-out Bragg peak and at each millimeter position along the distal edge using a custom slide holder, allowing for simultaneous measurement of physical dose. A reference radiation signal was generated using photons. The DNA DSBs at 3 hours (to assess for early damage) and at 24 hours (to assess for residual damage and repair) after irradiation were measured using the γH2AX assay and quantified via flow cytometry. Results were confirmed with clonogenic survival assays. A detailed map of the RBE as a function of depth along the Bragg peak was generated using γH2AX measurements as a biological endpoint. At 3 hours after irradiation, DNA DSBs were higher with protons at every point along the distal edge compared with samples irradiated with photons to similar doses. This effect was even more pronounced after 24 hours, indicating that the impact of DNA repair is less after proton irradiation relative to photons. The RBE demonstrated an exponential increase as a function of depth and was measured to be as high as 4.0 after 3 hours and as high as 6.0 after 24 hours. When the RBE-corrected dose was plotted as a function of depth, the peak effective dose was extended 2-3 mm beyond what would be expected with physical measurement. We generated a highly comprehensive map of the RBE of the distal edge of the Bragg peak, using a direct assay of DNA DSBs in vitro. Our data show that the RBE of the distal edge increases with depth and is significantly higher than previously reported estimates. Copyright © 2016 Elsevier Inc. All rights reserved.

77 FR 35732 - Self-Regulatory Organizations; The NASDAQ Stock Market LLC; Notice of Filing and Immediate...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-14

... important Exchange function to provide an opportunity to all market participants to trade against Customer... traded under the symbol MNX (``MNX'') as follows: Non-NOM market NOM market Customer Professional Firm... order resting on the NOM book. [[Page 35733

48 CFR 1609.7101-2 - Community-rated carrier performance factors.

Code of Federal Regulations, 2010 CFR

2010-10-01

... will apply the Customer Service and Critical Contract Compliance Requirements percentage factors..., payment, or service, perform the function, or otherwise meet its obligations as stated in 1609.7101-1. The... Element Performance factor (to be multiplied by premium and withheld from carrier's payments) I. Customer...

Relative binding affinity of carboxylate-, phosphonate-, and bisphosphonate-functionalized gold nanoparticles targeted to damaged bone tissue

NASA Astrophysics Data System (ADS)

Ross, Ryan D.; Cole, Lisa E.; Roeder, Ryan K.

2012-10-01

Functionalized Au NPs have received considerable recent interest for targeting and labeling cells and tissues. Damaged bone tissue can be targeted by functionalizing Au NPs with molecules exhibiting affinity for calcium. Therefore, the relative binding affinity of Au NPs surface functionalized with either carboxylate ( l-glutamic acid), phosphonate (2-aminoethylphosphonic acid), or bisphosphonate (alendronate) was investigated for targeted labeling of damaged bone tissue in vitro. Targeted labeling of damaged bone tissue was qualitatively verified by visual observation and backscattered electron microscopy, and quantitatively measured by the surface density of Au NPs using field-emission scanning electron microscopy. The surface density of functionalized Au NPs was significantly greater within damaged tissue compared to undamaged tissue for each functional group. Bisphosphonate-functionalized Au NPs exhibited a greater surface density labeling damaged tissue compared to glutamic acid- and phosphonic acid-functionalized Au NPs, which was consistent with the results of previous work comparing the binding affinity of the same functionalized Au NPs to synthetic hydroxyapatite crystals. Targeted labeling was enabled not only by the functional groups but also by the colloidal stability in solution. Functionalized Au NPs were stabilized by the presence of the functional groups, and were shown to remain well dispersed in ionic (phosphate buffered saline) and serum (fetal bovine serum) solutions for up to 1 week. Therefore, the results of this study suggest that bisphosphonate-functionalized Au NPs have potential for targeted delivery to damaged bone tissue in vitro and provide motivation for in vivo investigation.

The Mental Health Recovery Measure Can Be Used to Assess Aspects of Both Customer-Based and Service-Based Recovery in the Context of Severe Mental Illness.

PubMed

Oliveira-Maia, Albino J; Mendonça, Carina; Pessoa, Maria J; Camacho, Marta; Gago, Joaquim

2016-01-01

Within clinical psychiatry, recovery from severe mental illness (SMI) has classically been defined according to symptoms and function (service-based recovery). However, service-users have argued that recovery should be defined as the process of overcoming mental illness, regaining self-control and establishing a meaningful life (customer-based recovery). Here, we aimed to compare customer-based and service-based recovery and clarify their differential relationship with other constructs, namely needs and quality of life. The study was conducted in 101 patients suffering from SMI, recruited from a rural community mental health setting in Portugal. Customer-based recovery and function-related service-based recovery were assessed, respectively, using a shortened version of the Mental Health Recovery Measure (MHRM-20) and the Global Assessment of Functioning score. The Camberwell Assessment of Need scale was used to objectively assess needs, while subjective quality of life was measured with the TL-30s scale. Using multiple linear regression models, we found that the Global Assessment of Functioning score was incrementally predictive of the MHRM-20 score, when added to a model including only clinical and demographic factors, and that this model was further incremented by the score for quality of life. However, in an alternate model using the Global Assessment of Functioning score as the dependent variable, while the MHRM-20 score contributed significantly to the model when added to clinical and demographic factors, the model was not incremented by the score for quality of life. These results suggest that, while a more global concept of recovery from SMI may be assessed using measures for service-based and customer-based recovery, the latter, namely the MHRM-20, also provides information about subjective well-being. Pending confirmation of these findings in other populations, this instrument could thus be useful for comprehensive assessment of recovery and subjective well-being in patients suffering from SMI.

The Mental Health Recovery Measure Can Be Used to Assess Aspects of Both Customer-Based and Service-Based Recovery in the Context of Severe Mental Illness

PubMed Central

Oliveira-Maia, Albino J.; Mendonça, Carina; Pessoa, Maria J.; Camacho, Marta; Gago, Joaquim

2016-01-01

Within clinical psychiatry, recovery from severe mental illness (SMI) has classically been defined according to symptoms and function (service-based recovery). However, service-users have argued that recovery should be defined as the process of overcoming mental illness, regaining self-control and establishing a meaningful life (customer-based recovery). Here, we aimed to compare customer-based and service-based recovery and clarify their differential relationship with other constructs, namely needs and quality of life. The study was conducted in 101 patients suffering from SMI, recruited from a rural community mental health setting in Portugal. Customer-based recovery and function-related service-based recovery were assessed, respectively, using a shortened version of the Mental Health Recovery Measure (MHRM-20) and the Global Assessment of Functioning score. The Camberwell Assessment of Need scale was used to objectively assess needs, while subjective quality of life was measured with the TL-30s scale. Using multiple linear regression models, we found that the Global Assessment of Functioning score was incrementally predictive of the MHRM-20 score, when added to a model including only clinical and demographic factors, and that this model was further incremented by the score for quality of life. However, in an alternate model using the Global Assessment of Functioning score as the dependent variable, while the MHRM-20 score contributed significantly to the model when added to clinical and demographic factors, the model was not incremented by the score for quality of life. These results suggest that, while a more global concept of recovery from SMI may be assessed using measures for service-based and customer-based recovery, the latter, namely the MHRM-20, also provides information about subjective well-being. Pending confirmation of these findings in other populations, this instrument could thus be useful for comprehensive assessment of recovery and subjective well-being in patients suffering from SMI. PMID:27857698

Three essays on utility regulation

NASA Astrophysics Data System (ADS)

Hlasny, Vladimir

To induce utilities in the gas distribution market to operate efficiently, US states have deployed consumer choice programs, price caps, and variations of sliding scale plans. My first essay studies the impact of these restructuring and deregulation efforts on consumer rates, using panel data from a custom survey of state commissions and the Department of Energy. I estimate the residential, small commercial and industrial price equations jointly, and use instrumental variables to control for the potentially endogenous demand and status of deregulation. Consumer choice programs lower the prices by 2.2-20.1% compared to the rate of return regulation, benefiting industrial consumers the most and households the least. These effects appear even one to two years prior to the programs' implementation, and become stronger over time. Price caps lower all prices by 0.0-20.0%, with the same ranking. The impacts of sliding scale plans are close to zero, between -2.6% and +4.0% The second paper evaluates health damages caused by air concentrations of SO2 under three alternative environmental policies leading to identical aggregate emissions: emission caps, a nationwide emission tax, and a system of tradable emission allowances such as the one currently used in the US. The numerical model of the industry finds generators' output, participation in energy trade and SO2 abatement effort under each policy. The resulting SO2 concentrations are used to derive the aggregate health damages using estimates in the medical literature. SO2 concentrations vary across policies even when the aggregate emissions are the same. These variations translate into substantially different losses for any individual state, and, nationwide, to hundreds of millions of dollars of difference in aggregate damages. Emission caps are found to lead to the lowest damages, outperforming the currently used system of allowances by 452 million. A uniform emission tax leads to very similar damages as the system of tradable allowances, in agreement with the theory. These results are consistent with prior academic studies, that emission allowances and uniform taxes may lead to higher damages than regulatory instruments that control regional emissions more closely. In terms of SO2 concentrations and health impacts, emission caps are shown to favor the southern and southeastern states, where they deliver 840 million lower damages than the system of allowances or an emission tax, while they deliver 390 million higher damages in the northern and northeastern states. In the third essay I compute health damages from SO2 under different assumptions on the relationship between the concentration levels and their marginal health impacts. I evaluate SO2 concentration profiles resulting under the three policies in the previous chapter. Using the ranges of marginal damage estimates in medical literature, emission caps are shown to lead to the lowest damages under all considered slopes, although their benefit over the system of tradable allowances falls as the slope of the marginal damage function increases. With the maxiμm slope consistent with current medical data, the savings in damages under the emission caps in the southern states fall to 670 million compared the system of allowances, while the excess in damages they cause in the north and the northeast rises to $600 million.

Large-Scale Interaction Profiling of Protein Domains Through Proteomic Peptide-Phage Display Using Custom Peptidomes.

PubMed

Seo, Moon-Hyeong; Nim, Satra; Jeon, Jouhyun; Kim, Philip M

2017-01-01

Protein-protein interactions are essential to cellular functions and signaling pathways. We recently combined bioinformatics and custom oligonucleotide arrays to construct custom-made peptide-phage libraries for screening peptide-protein interactions, an approach we call proteomic peptide-phage display (ProP-PD). In this chapter, we describe protocols for phage display for the identification of natural peptide binders for a given protein. We finally describe deep sequencing for the analysis of the proteomic peptide-phage display.

A Study of the Air Force’s Exception Management Process: Its Effect on Customer Service and Order Processing

DTIC Science & Technology

1991-09-01

The purpose of this study was two-fold; the first goal was to determine what the SBSS order processing is, and secondly to determine the effect the...current method of ECC management has on the SBSS order processing cycle and the level of customer service rendered by base supply. The research...revealed that exception management is a crucial component of a successful order processing function. Further, it was established that the level of customer

Uncertainty in flood damage estimates and its potential effect on investment decisions

NASA Astrophysics Data System (ADS)

Wagenaar, D. J.; de Bruijn, K. M.; Bouwer, L. M.; de Moel, H.

2016-01-01

This paper addresses the large differences that are found between damage estimates of different flood damage models. It explains how implicit assumptions in flood damage functions and maximum damages can have large effects on flood damage estimates. This explanation is then used to quantify the uncertainty in the damage estimates with a Monte Carlo analysis. The Monte Carlo analysis uses a damage function library with 272 functions from seven different flood damage models. The paper shows that the resulting uncertainties in estimated damages are in the order of magnitude of a factor of 2 to 5. The uncertainty is typically larger for flood events with small water depths and for smaller flood events. The implications of the uncertainty in damage estimates for flood risk management are illustrated by a case study in which the economic optimal investment strategy for a dike segment in the Netherlands is determined. The case study shows that the uncertainty in flood damage estimates can lead to significant over- or under-investments.

Detecting delaminations and disbondings on full-scale wing composite panel by guided waves based SHM system

NASA Astrophysics Data System (ADS)

Monaco, E.; Boffa, N. D.; Memmolo, V.; Ricci, F.; Maio, L.

2016-04-01

A full-scale lower wing panel made of composite material has been designed, manufactured and sensorised within the European Funded research project named SARISTU. The authors contributed to the whole development of the system, from design to implementation as well as to the impacts campaign phase where Barely Visible and Visible Damages (BVID and VID) are to be artificially induced on the panel by a pneumatic impact machine. This work summarise part of the experimental results related to damages production, their assessment by C-SCAN as reference NDT method as well as damage detection of delimitations by a guided waves based SHM. The SHM system is made by customized piezoelectric patches secondary bonded on the wing plate acting both as guided waves sources and receivers. The paper will deal mostly with the experimental impact campaign and the signal analyses carried out to extract the metrics more sensitive to damages induced. Image reconstruction of the damages dimensions and shapes will be also described based mostly on the combination of metrics maps over the plate partial surfaces. Finally a comparison of damages maps obtained by the SHM approach and those obtained by "classic" C-SCAN will be presented analyzing briefly pros and cons of the two different approached as a combination to the most effective structural maintenance scenario of a commercial aircraft.

Quality Function Deployment for Large Systems

NASA Technical Reports Server (NTRS)

Dean, Edwin B.

1992-01-01

Quality Function Deployment (QFD) is typically applied to small subsystems. This paper describes efforts to extend QFD to large scale systems. It links QFD to the system engineering process, the concurrent engineering process, the robust design process, and the costing process. The effect is to generate a tightly linked project management process of high dimensionality which flushes out issues early to provide a high quality, low cost, and, hence, competitive product. A pre-QFD matrix linking customers to customer desires is described.

75 FR 58416 - Statement of Organization, Functions and Delegations of Authority

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-24

..., customer service and system and analytical support. Chapter RU--Bureau of Clinician Recruitment and Service..., coordinates and evaluates Bureau-wide management activities; (3) maintains effective relationships within HRSA... including but not limited to the Bureau Web site, BCRS Call Center and customer service portal, and...

19 CFR 201.1 - Applicability of part.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 3 2010-04-01 2010-04-01 false Applicability of part. 201.1 Section 201.1 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION GENERAL RULES OF GENERAL APPLICATION § 201.1 Applicability of part. This part relates generally to functions and activities of the Commission under various...

19 CFR 201.1 - Applicability of part.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 19 Customs Duties 3 2012-04-01 2012-04-01 false Applicability of part. 201.1 Section 201.1 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION GENERAL RULES OF GENERAL APPLICATION § 201.1 Applicability of part. This part relates generally to functions and activities of the Commission under various...

19 CFR 201.1 - Applicability of part.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 19 Customs Duties 3 2013-04-01 2013-04-01 false Applicability of part. 201.1 Section 201.1 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION GENERAL RULES OF GENERAL APPLICATION § 201.1 Applicability of part. This part relates generally to functions and activities of the Commission under various...

19 CFR 201.1 - Applicability of part.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 3 2011-04-01 2011-04-01 false Applicability of part. 201.1 Section 201.1 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION GENERAL RULES OF GENERAL APPLICATION § 201.1 Applicability of part. This part relates generally to functions and activities of the Commission under various...

19 CFR 201.1 - Applicability of part.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 19 Customs Duties 3 2014-04-01 2014-04-01 false Applicability of part. 201.1 Section 201.1 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION GENERAL RULES OF GENERAL APPLICATION § 201.1 Applicability of part. This part relates generally to functions and activities of the Commission under various...

19 CFR 10.14 - Fabricated components subject to the exemption.

Code of Federal Regulations, 2012 CFR

2012-04-01

....14 Section 10.14 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY... assembly for a computer is assembled in the United States by soldering American-made and foreign-made... electronic function and is ready for incorporation into the computer. The foreign-made components have...

19 CFR 10.14 - Fabricated components subject to the exemption.

Code of Federal Regulations, 2014 CFR

2014-04-01

....14 Section 10.14 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY... assembly for a computer is assembled in the United States by soldering American-made and foreign-made... electronic function and is ready for incorporation into the computer. The foreign-made components have...

19 CFR 10.14 - Fabricated components subject to the exemption.

Code of Federal Regulations, 2013 CFR

2013-04-01

....14 Section 10.14 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY... assembly for a computer is assembled in the United States by soldering American-made and foreign-made... electronic function and is ready for incorporation into the computer. The foreign-made components have...

19 CFR 10.14 - Fabricated components subject to the exemption.

Code of Federal Regulations, 2011 CFR

2011-04-01

....14 Section 10.14 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY... assembly for a computer is assembled in the United States by soldering American-made and foreign-made... electronic function and is ready for incorporation into the computer. The foreign-made components have...

Treatment of a unicameral bone cyst in a dog using a customized titanium device.

PubMed

Nojiri, Ayami; Akiyoshi, Hideo; Ohashi, Fumihito; Ijiri, Atsuki; Sawase, Osamu; Matsushita, Tomiharu; Takemoto, Mitsuru; Fujibayashi, Shunsuke; Nakamura, Takashi; Yamaguchi, Tsutomu

2015-01-01

A 4-year-old Shih-Tzu, referred for an enlarged left carpus, was diagnosed with a unicameral bone cyst. A customized titanium device was inserted into cystic lesion and fixed by titanium screws. Sufficient strength of the affected bone with the device inserted to maintain limb function was established after resection of contents of cystic lesion. There was no deterioration of the lesion of bone cyst, and acceptable function of the affected limb with no clinical signs of lameness was maintained during 36 months follow-up. The results of this study demonstrated that bone cyst curettage and use of a customized titanium device could provide an effective alternative treatment of huge lesion of unicameral bone cysts with the intent of preventing pathologic fractures.

Treatment of a unicameral bone cyst in a dog using a customized titanium device

PubMed Central

NOJIRI, Ayami; AKIYOSHI, Hideo; OHASHI, Fumihito; IJIRI, Atsuki; SAWASE, Osamu; MATSUSHITA, Tomiharu; TAKEMOTO, Mitsuru; FUJIBAYASHI, Shunsuke; NAKAMURA, Takashi; YAMAGUCHI, Tsutomu

2014-01-01

ABSTRACT A 4-year-old Shih-Tzu, referred for an enlarged left carpus, was diagnosed with a unicameral bone cyst. A customized titanium device was inserted into cystic lesion and fixed by titanium screws. Sufficient strength of the affected bone with the device inserted to maintain limb function was established after resection of contents of cystic lesion. There was no deterioration of the lesion of bone cyst, and acceptable function of the affected limb with no clinical signs of lameness was maintained during 36 months follow-up. The results of this study demonstrated that bone cyst curettage and use of a customized titanium device could provide an effective alternative treatment of huge lesion of unicameral bone cysts with the intent of preventing pathologic fractures. PMID:25319515

Nematode Damage Functions: The Problems of Experimental and Sampling Error

PubMed Central

Ferris, H.

1984-01-01

The development and use of pest damage functions involves measurement and experimental errors associated with cultural, environmental, and distributional factors. Damage predictions are more valuable if considered with associated probability. Collapsing population densities into a geometric series of population classes allows a pseudo-replication removal of experimental and sampling error in damage function development. Recognition of the nature of sampling error for aggregated populations allows assessment of probability associated with the population estimate. The product of the probabilities incorporated in the damage function and in the population estimate provides a basis for risk analysis of the yield loss prediction and the ensuing management decision. PMID:19295865

Damage identification of a reinforced concrete frame by finite element model updating using damage parameterization

NASA Astrophysics Data System (ADS)

Fang, Sheng-En; Perera, Ricardo; De Roeck, Guido

2008-06-01

This paper develops a sensitivity-based updating method to identify the damage in a tested reinforced concrete (RC) frame modeled with a two-dimensional planar finite element (FE) by minimizing the discrepancies of modal frequencies and mode shapes. In order to reduce the number of unknown variables, a bidimensional damage (element) function is proposed, resulting in a considerable improvement of the optimization performance. For damage identification, a reference FE model of the undamaged frame divided into a few damage functions is firstly obtained and then a rough identification is carried out to detect possible damage locations, which are subsequently refined with new damage functions to accurately identify the damage. From a design point of view, it would be useful to evaluate, in a simplified way, the remaining bending stiffness of cracked beam sections or segments. Hence, an RC damage model based on a static mechanism is proposed to estimate the remnant stiffness of a cracked RC beam segment. The damage model is based on the assumption that the damage effect spreads over a region and the stiffness in the segment changes linearly. Furthermore, the stiffness reduction evaluated using this damage model is compared with the FE updating result. It is shown that the proposed bidimensional damage function is useful in producing a well-conditioned optimization problem and the aforementioned damage model can be used for an approximate stiffness estimation of a cracked beam segment.

Competitive Bidding in a Certain Class of Auctions

NASA Astrophysics Data System (ADS)

Johansson, Mathias

2006-11-01

We consider the problem of determining the amount to bid in a certain type of auctions in which customers submit one sealed bid. The bid reflects the price a customer is willing to pay for one unit of the offered goods. The auction is repeated and at each auction each customer requests a certain amount of goods, an amount that we call the capacity of the customer and that varies among customers and over time. At each auction, only the customer with the largest bid-capacity product obtains any goods. The price paid by the winner equals his/her bid-capacity product, and the amount of goods obtained in return equals the winner's capacity. The auction is repeated many times, with only limited information concerning winning bid-capacity products being announced to the customers. This situation is motivated in for example wireless communication networks in which a possible way of obtaining a desired service level is to use dynamic pricing and competitive bidding. In this application, the capacity is typically uncertain when the bid is made. We derive bidding rules and loss functions for a few typical service requirements.

Making business sense of the Internet.

PubMed

Ghosh, S

1998-01-01

For managers in large, well-established businesses, the Internet is a tough nut to crack. It is very simple to set up a Web presence and very difficult to create a Web-based business model. Established businesses that over decades have carefully built brands and physical distribution relationships risk damaging all they have created when they pursue commerce through the Net. Still, managers can't avoid the impact of electronic commerce on their businesses. They need to understand the opportunities available to them and recognize how their companies may be vulnerable if rivals seize those opportunities first. Broadly speaking, the Internet presents four distinct types of opportunities. First, it links companies directly to customers, suppliers, and other interested parties. Second, it lets companies bypass other players in an industry's value chain. Third, it is a tool for developing and delivering new products and services to new customers. Fourth, it will enable certain companies to dominate the electronic channel of an entire industry or segment, control access to customers, and set business rules. As he elaborates on these four points, the author gives established companies a systematic way to sort through the risks and rewards of doing business in cyberspace.

How to survive climate change and still run a thriving business.

PubMed

Lowitt, Eric

2014-04-01

Climate change presents clear and pressing threats to business--materials and product shortages, price volatility, legal bans or consumer backlash, and damaged transportation infrastructure, to name just a few. But there are opportunities as well. Lowitt, a consultant in the sustainability field, has developed a series of detailed checklists that will help smart managers reduce operational, regulatory, and reputational risk while finding new ways to cut costs, improve performance, enhance customer relationships, and otherwise increase competitiveness. The checklist recommendations, tested and refined through Lowitt's research into and work with firms including Coca-Cola, GE, and Owens Corning, cover four broad areas in the product life cycle: sourcing, manufacturing, distribution, and consumption. Actions range from educating and incentivizing employees to use climate change-conscious behavior to measuring and reporting key metrics to determining when alternative materials, methods, sites, or contract partners may be called for. Like any such tool, the checklists don't provide a one-size-fits-all plan. Rather, they equip executives to customize their strategies according to factors such as their goods and services, risk tolerance, customer needs, and reliance on third parties throughout the value chain.

Combinatory effect of mesenchymal stromal cells transplantation and quercetin after spinal cord injury in rat.

PubMed

Wang, X; Wang, Y-Y; Zhang, L-L; Li, G-T; Zhang, H-T

2018-05-01

To investigate the synergistic effects of quercetin (Qu) administration and transplantation of human umbilical cord mesenchymal stromal cells (HUMSCs) following spinal cord injury (SCI). HUMSCs were isolated, cultured and certificated via flow cytometry. Sixty Sprague-Dawley (SD) female rats were used and SCI models were made. All rats were divided into five experimental groups: culture medium treated group (n=28); HUSMCs + quercetin-treated group (n = 28); HUMSCs treated group (n=28); quercetin-treated group (n = 28); sham group (n = 20). Basso, Beattie, and Bresnahan (BBB) were used to assess neurological function recovery. Axons at the injury epicenter of the injury were checked by immunohistochemical analysis. Cystic cavity was measured and rat cytokine Luminex custom 8-plex kits (for interleukin (IL)-4, IL-1β, IL-6, IL-10, interferon (IFN)-γ, tumor necrosis factor (TNF)-β1) were checked. The combination treatment with Qu and delayed transplantation of HUMSCs after rat SCI improved neurological functional recovery, increased axonal preservation, promoted macrophage polarization, decreased the size of the cystic cavity, reduced the proinflammatory cytokines, including IL-1β and IL-6. Also, it increased anti-inflammatory cytokines, including IL-4, IL-10, and transforming growth factor (TGF)-β1. We showed that HUMSCs transplantation in combination with Qu was a potential strategy for reducing secondary damage and promoting functional recovery following SCI.

The impact of customer-contractor interactions on spacecraft innovation: Insights from communication satellite history

NASA Astrophysics Data System (ADS)

Szajnfarber, Zoe; Stringfellow, Margaret V.; Weigel, Annalisa L.

2010-11-01

This paper captures a first detailed attempt to quantitatively analyze the innovation history of the space sector. Building on a communication satellite innovation metric and a spacecraft innovation framework developed as part of an ongoing project, this paper presents a preliminary model of global communication satellite innovation. In addition to innovation being a function of the rate of performance normalized by price, innovation was found to be strongly influenced by characteristics of the customer-contractor contractual relationship. Specifically, Department of Defense contracts tend to result in a lower level of innovation on average as compared to other customers. Also, particular customer-contractor pairs perform differently and exhibit a second order relationship in time.

St. Louis Area Earthquake Hazards Mapping Project

USGS Publications Warehouse

Williams, Robert A.; Steckel, Phyllis; Schweig, Eugene

2007-01-01

St. Louis has experienced minor earthquake damage at least 12 times in the past 200 years. Because of this history and its proximity to known active earthquake zones, the St. Louis Area Earthquake Hazards Mapping Project will produce digital maps that show variability of earthquake hazards in the St. Louis area. The maps will be available free via the internet. They can be customized by the user to show specific areas of interest, such as neighborhoods or transportation routes.

Custom-Made Total Talonavicular Replacement in a Professional Rock Climber.

PubMed

Giannini, Sandro; Cadossi, Matteo; Mazzotti, Antonio; Ramponi, Laura; Belvedere, Claudio; Leardini, Alberto

Professional athletes are often eager to resume sporting activities at preinjury levels. When facing the challenge of restoring joint function after a complex articular fracture, innovative solutions must be explored. We describe the results of what we believe to be the first custom-made talonavicular prosthesis implanted in a professional rock climber who had developed post-traumatic ankle and talonavicular arthritis as sequelae of a complex talar and navicular fracture. Using computed tomography scan reconstruction of the contralateral healthy ankle and direct metal laser sintering, a custom-made talonavicular prosthesis was obtained and implanted using an anteromedial approach. The patient was clinically and radiographically evaluated every 6 months after surgery for 30 months. A 3-dimensional videofluoroscopic analysis was performed to assess the range of motion about the prosthesis. At the last follow-up visit, the functional scores were excellent (Tegner activity scale score of 9 of 10), and he had completely resumed his sporting activity. The American Orthopaedic Foot and Ankle Society score had increased from 36 to 81 points, and no signs of radiolucency were observed on the radiographs. The 3-dimensional videofluoroscopic analysis showed 15° of dorsiflexion and 4° of plantar flexion at the ankle. A customized solution is an option when the patient's expectations are not likely to be met by standard treatment, such as arthrodesis. A custom-made talonavicular prosthesis can be an effective solution for complex ankle injury sequelae in patients demanding high functionality. Copyright © 2015 American College of Foot and Ankle Surgeons. Published by Elsevier Inc. All rights reserved.

PDC bits break ground with advanced vibration mitigation

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1995-10-01

Advancements in PDC bit technology have resulted in the identification and characterization of different types of vibrational modes that historically have limited PDC bit performance. As a result, concepts have been developed that prevent the initiation of vibration and also mitigate its damaging effects once it occurs. This vibration-reducing concept ensures more efficient use of the energy available to a PDC bit performance. As a result, concepts have been developed that prevent the imitation of vibration and also mitigate its damaging effects once it occurs. This vibration-reducing concept ensures more efficient use of the energy available to a PDC bit,more » thereby improving its performance. This improved understanding of the complex forces affecting bit performance is driving bit customization for specific drilling programs.« less

Desktop publishing and validation of custom near visual acuity charts.

PubMed

Marran, Lynn; Liu, Lei; Lau, George

2008-11-01

Customized visual acuity (VA) assessment is an important part of basic and clinical vision research. Desktop computer based distance VA measurements have been utilized, and shown to be accurate and reliable, but computer based near VA measurements have not been attempted, mainly due to the limited spatial resolution of computer monitors. In this paper, we demonstrate how to use desktop publishing to create printed custom near VA charts. We created a set of six near VA charts in a logarithmic progression, 20/20 through 20/63, with multiple lines of the same acuity level, different letter arrangements in each line and a random noise background. This design allowed repeated measures of subjective accommodative amplitude without the potential artifact of familiarity of the optotypes. The background maintained a constant and spatial frequency rich peripheral stimulus for accommodation across the six different acuity levels. The paper describes in detail how pixel-wise accurate black and white bitmaps of Sloan optotypes were used to create the printed custom VA charts. At all acuity levels, the physical sizes of the printed custom optotypes deviated no more than 0.034 log units from that of the standard, satisfying the 0.05 log unit ISO criterion we used to demonstrate physical equivalence. Also, at all acuity levels, log unit differences in the mean target distance for which reliable recognition of letters first occurred for the printed custom optotypes compared to the standard were found to be below 0.05, satisfying the 0.05 log unit ISO criterion we used to demonstrate functional equivalence. It is possible to use desktop publishing to create custom near VA charts that are physically and functionally equivalent to standard VA charts produced by a commercial printing process.

The effect of proposed software products' features on the satisfaction and dissatisfaction of potential customers

NASA Astrophysics Data System (ADS)

Hussain, Azham; Mkpojiogu, Emmanuel O. C.; Yusof, Muhammad Mat

2016-08-01

This paper reports the effect of proposed software products features on the satisfaction and dissatisfaction of potential customers of proposed software products. Kano model's functional and dysfunctional technique was used along with Berger et al.'s customer satisfaction coefficients. The result shows that only two features performed the most in influencing the satisfaction and dissatisfaction of would-be customers of the proposed software product. Attractive and one-dimensional features had the highest impact on the satisfaction and dissatisfaction of customers. This result will benefit requirements analysts, developers, designers, projects and sales managers in preparing for proposed products. Additional analysis showed that the Kano model's satisfaction and dissatisfaction scores were highly related to the Park et al.'s average satisfaction coefficient (r=96%), implying that these variables can be used interchangeably or in place of one another to elicit customer satisfaction. Furthermore, average satisfaction coefficients and satisfaction and dissatisfaction indexes were all positively and linearly correlated.

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

Severe wind and snow storms hit the Pacific Northwest region on December 14 – 15, 2006, following severe flooding during the past few days. The severe weather resulted in major power outages through the region. At peak there were 1.8 million customers without power which included BC Hydro in Canada. Currently, there are over 1.5 million outages in the region as a result of the Pacific Northwest Storms. This represents about 42 percent of customers in affected utility service areas in Oregon and Washington. See table below. Because the current wind and snow storms are coming on the heels ofmore » extensive flooding in the region, electric utilities are experiencing damage. Wind gusts reached close to 100 mph in some areas of the region. The storm is expected to bring its strong winds and heavy snow into Idaho, Montana and Wyoming Friday and into the weekend. There are currently no reported major impacts to the petroleum and natural gas infrastructure.« less

Modelling voltage sag mitigation using dynamic voltage restorer and analyzing power quality issue

NASA Astrophysics Data System (ADS)

Ismail, Nor Laili; Hidzir, Hizrin Dayana Mohd; Thanakodi, Suresh; Nazar, Nazatul Shiema Moh; Ibrahim, Pungut; Ali, Che Ku Muhammad Sabri Che Ku

2018-02-01

Power quality problem which are arise due to a fault or a pulsed load can have caused an interruption of critical load. The modern power systems are becoming more sensitive to the quality of the power supplied by the utility company. Voltage sags and swells, flicker, interruptions, harmonic distortion and other distortion to the sinusoidal waveform are the examples of the power quality problems. The most affected due to these problems is industrial customers who use a lot of sensitive equipment. There has suffered a huge loss to these problems. Resulting of broken or damage equipment if voltage sag exceeds the sensitive threshold of the equipment. Thus, device such as Static Synchronous Compensator (STATCOM) and Dynamic Voltage Restorer (DVR) has been created to solve this problem among users. DVR is a custom power device that most effective and efficient. This paper intended to report the DVR operations during voltage sag compensation.

18 CFR 358.5 - Independent functioning rule.

Code of Federal Regulations, 2010 CFR

2010-04-01

... its marketing function employees. (b) Separation of functions. (1) A transmission provider is prohibited from permitting its marketing function employees to: (i) Conduct transmission functions; or (ii... differs in any way from the access available to other transmission customers. (2) A transmission provider...

Combining Economic and Conjoint Analysis to Determine Optimal Academic Services

ERIC Educational Resources Information Center

Howard, Mona Whitley; Sobol, Marion G.

2004-01-01

In today's era of global competition, organizations must manage their functions and activities in a manner such that they are responsive to customers' needs and can provide excellence in service to the customer while also being efficient and cost conscious. These issues are extremely common in corporate organizations, but such concerns are equally…

Low dose radiation damage effects in silicon strip detectors

NASA Astrophysics Data System (ADS)

Wiącek, P.; Dąbrowski, W.

2016-11-01

The radiation damage effects in silicon segmented detectors caused by X-rays have become recently an important research topic driven mainly by development of new detectors for applications at the European X-ray Free Electron Laser (E-XFEL). However, radiation damage in silicon strip is observed not only after extreme doses up to 1 GGy expected at E-XFEL, but also at doses in the range of tens of Gy, to which the detectors in laboratory instruments like X-ray diffractometers or X-ray spectrometers can be exposed. In this paper we report on investigation of radiation damage effects in a custom developed silicon strip detector used in laboratory diffractometers equipped with X-ray tubes. Our results show that significant degradation of detector performance occurs at low doses, well below 200 Gy, which can be reached during normal operation of laboratory instruments. Degradation of the detector energy resolution can be explained by increasing leakage current and increasing interstrip capacitance of the sensor. Another observed effect caused by accumulation of charge trapped in the surface oxide layer is change of charge division between adjacent strips. In addition, we have observed unexpected anomalies in the annealing process.

A novel real-time health monitoring system for unmanned vehicles

NASA Astrophysics Data System (ADS)

Zhang, David C.; Ouyang, Lien; Qing, Peter; Li, Irene

2008-04-01

Real-time monitoring the status of in-service structures such as unmanned vehicles can provide invaluable information to detect the damages to the structures on time. The unmanned vehicles can be maintained and repaired in time if such damages are found. One typical cause of damages of unmanned vehicles is from impacts caused by bumping into some obstacles or being hit by some objects such as hostile fire. This paper introduces a novel impact event sensing system that can detect the location of the impact events and the force-time history of the impact events. The system consists of the Piezo-electric sensor network, the hardware platform and the analysis software. The new customized battery-powered impact event sensing system supports up to 64-channel parallel data acquisition. It features an innovative low-power hardware trigger circuit that monitors 64 channels simultaneously. The system is in the sleep mode most of the time. When an impact event happens, the system will wake up in micro-seconds and detect the impact location and corresponding force-time history. The system can be combined with the SMART sensing system to further evaluate the impact damage severity.

WE-F-16A-01: Commissioning and Clinical Use of PC-ISO for Customized, 3D Printed, Gynecological Brachytherapy Applicators

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cunha, J; Sethi, R; Mellis, K

Purpose: (1) Evaluate the safety and radiation attenuation properties of PCISO, a bio-compatible, sterilizable 3D printing material by Stratasys, (2) establish a method for commissioning customized multi- and single-use 3D printed applicators, (3) report on use of customized vaginal cylinders used to treat a series of serous endometrial cancer patient. Methods: A custom film dosimetry apparatus was designed to hold a Gafchromic radio film segment between two blocks of PC-ISO and 3D-printed using a Fortus 400mc (StrataSys). A dose plan was computed using 13 dwell positions at 2.5 mm spacing and normalized to 1500 cGy at 1 cm. Film exposuremore » was compared to control tests in only air and only water. The average Hounsfield Unit (HU) was computed and used to verify water equivalency. For the clinical use cases, the physician specifies the dimensions and geometry of a custom applicator from which a CAD model is designed and printed. Results: The doses measured from the PC-ISO Gafchromic film test were within 1% of the dose measured in only water between 1cm and 6cm from the channel. Doses increased 7–4% measured in only air. HU range was 11–43. The applicators were sterilized using the Sterrad system multiple times without damage. As of submission 3 unique cylinders have been designed, printed, and used in the clinic. A standardizable workflow for commissioning custom 3D printed applicators was codified and will be reported. Conclusions: Quality assurance (QA) evaluation of the PC-ISO 3D-printing material showed that PC-ISO is a suitable material for a gynecological brachytherapy vaginal cylinder in a clinical setting. With the material commissioning completed, if the physician determines that a better treatment would Result, a customized design is fabricated with limited additional QA necessary. Although this study was specific to PC-ISO, the same setup can be used to evaluate other 3D-printing materials.« less

A method for determining customer requirement weights based on TFMF and TLR

NASA Astrophysics Data System (ADS)

Ai, Qingsong; Shu, Ting; Liu, Quan; Zhou, Zude; Xiao, Zheng

2013-11-01

'Customer requirements' (CRs) management plays an important role in enterprise systems (ESs) by processing customer-focused information. Quality function deployment (QFD) is one of the main CRs analysis methods. Because CR weights are crucial for the input of QFD, we developed a method for determining CR weights based on trapezoidal fuzzy membership function (TFMF) and 2-tuple linguistic representation (TLR). To improve the accuracy of CR weights, we propose to apply TFMF to describe CR weights so that they can be appropriately represented. Because the fuzzy logic is not capable of aggregating information without loss, TLR model is adopted as well. We first describe the basic concepts of TFMF and TLR and then introduce an approach to compute CR weights. Finally, an example is provided to explain and verify the proposed method.

Development of a wearable measurement and control unit for personal customizing machine-supported exercise.

PubMed

Wang, Zhihui; Tamura, Naoki; Kiryu, Tohru

2005-01-01

Wearable technology has been used in various health-related fields to develop advanced monitoring solutions. However, the monitoring function alone cannot meet all the requirements of personal customizing machine-supported exercise that have biosignal-based controls. In this paper, we propose a new wearable unit design equipped with measurement and control functions to support the personal customization process. The wearable unit can measure the heart rate and electromyogram signals during exercise and output workload control commands to the exercise machines. We then applied a prototype of the wearable unit to an Internet-based cycle ergometer system. The wearable unit was examined using twelve young people to check its feasibility. The results verified that the unit could successfully adapt to the control of the workload and was effective for continuously supporting gradual changes in physical activities.

[A Comparison Study on Early Damage Detection of Left Ventricular Function Based on Doppler Imaging Method for Children with Tumor].

PubMed

Liu, Ying; Zhang, Haowei; Zhang, Hang

2015-12-01

The early damage detection and evaluation are of great significance in treatment and prognosis to the left ventricular function for children with tumor. In this paper, it is reported that the early damage of the left ventricular function was observed by pulsed wave Doppler (PWD) and tissue Doppler imaging (TDI) in our laboratory. Eighty children half a year to fourteen years old were included in this study. The cardiac function indices in chemotherapy group and control group were measured and compared. The results showed that there was significant difference in mitral and tricuspid annulus flow spectrum between the two groups. Compared with PWD,TDI is more prompt, objective and accurate in detecting early damage of left ventricular function in children with tumor. And TDI is a good method for early identification of ventricular function damage in children with tumor.

[Evaluation of production and clinical working time of computer-aided design/computer-aided manufacturing (CAD/CAM) custom trays for complete denture].

PubMed

Wei, L; Chen, H; Zhou, Y S; Sun, Y C; Pan, S X

2017-02-18

To compare the technician fabrication time and clinical working time of custom trays fabricated using two different methods, the three-dimensional printing custom trays and the conventional custom trays, and to prove the feasibility of the computer-aided design/computer-aided manufacturing (CAD/CAM) custom trays in clinical use from the perspective of clinical time cost. Twenty edentulous patients were recruited into this study, which was prospective, single blind, randomized self-control clinical trials. Two custom trays were fabricated for each participant. One of the custom trays was fabricated using functional suitable denture (FSD) system through CAD/CAM process, and the other was manually fabricated using conventional methods. Then the final impressions were taken using both the custom trays, followed by utilizing the final impression to fabricate complete dentures respectively. The technician production time of the custom trays and the clinical working time of taking the final impression was recorded. The average time spent on fabricating the three-dimensional printing custom trays using FSD system and fabricating the conventional custom trays manually were (28.6±2.9) min and (31.1±5.7) min, respectively. The average time spent on making the final impression with the three-dimensional printing custom trays using FSD system and the conventional custom trays fabricated manually were (23.4±11.5) min and (25.4±13.0) min, respectively. There was significant difference in the technician fabrication time and the clinical working time between the three-dimensional printing custom trays using FSD system and the conventional custom trays fabricated manually (P<0.05). The average time spent on fabricating three-dimensional printing custom trays using FSD system and making the final impression with the trays are less than those of the conventional custom trays fabricated manually, which reveals that the FSD three-dimensional printing custom trays is less time-consuming both in the clinical and laboratory process than the conventional custom trays. In addition, when we manufacture custom trays by three-dimensional printing method, there is no need to pour preliminary cast after taking the primary impression, therefore, it can save the impression material and model material. As to completing denture restoration, manufacturing custom trays using FSD system is worth being popularized.

The Cold Dark Matter Search test stand warm electronics card

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hines, Bruce; /Colorado U., Denver; Hansen, Sten

A card which does the signal processing for four SQUID amplifiers and two charge sensitive channels is described. The card performs the same functions as is presently done with two custom 9U x 280mm Eurocard modules, a commercial multi-channel VME digitizer, a PCI to GPIB interface, a PCI to VME interface and a custom built linear power supply. By integrating these functions onto a single card and using the power over Ethernet standard, the infrastructure requirements for instrumenting a Cold Dark Matter Search (CDMS) detector test stand are significantly reduced.

Benefits of mass customized products: moderating role of product involvement and fashion innovativeness.

PubMed

Park, Minjung; Yoo, Jungmin

2018-02-01

The objective of this study was to explore impacts and benefits of mass customized products on emotional product attachment, favorable attitudes toward a mass customization program, and the ongoing effect on loyalty intentions. This study further investigated how benefits, attachment, attitudes, and loyalty intentions differed as a function of involvement and fashion innovativeness. 290 female online shoppers in South Korea participated in an online survey. Results of this study revealed that perceived benefits positively influenced emotional product attachment and attitudes toward a mass customization program. In addition, attachment positively influenced attitudes, which in turn affected loyalty intentions. This study also found that benefits, attachment, attitudes, and loyalty intentions were all higher in highly involved consumers (high fashion innovators) than those in less involved consumers (low fashion innovators). This study concludes with theoretical and practical implications for mass customization programs.

An analytical approach to customer requirement information processing

NASA Astrophysics Data System (ADS)

Zhou, Zude; Xiao, Zheng; Liu, Quan; Ai, Qingsong

2013-11-01

'Customer requirements' (CRs) management is a key component of customer relationship management (CRM). By processing customer-focused information, CRs management plays an important role in enterprise systems (ESs). Although two main CRs analysis methods, quality function deployment (QFD) and Kano model, have been applied to many fields by many enterprises in the past several decades, the limitations such as complex processes and operations make them unsuitable for online businesses among small- and medium-sized enterprises (SMEs). Currently, most SMEs do not have the resources to implement QFD or Kano model. In this article, we propose a method named customer requirement information (CRI), which provides a simpler and easier way for SMEs to run CRs analysis. The proposed method analyses CRs from the perspective of information and applies mathematical methods to the analysis process. A detailed description of CRI's acquisition, classification and processing is provided.

Customer demand prediction of service-oriented manufacturing using the least square support vector machine optimized by particle swarm optimization algorithm

NASA Astrophysics Data System (ADS)

Cao, Jin; Jiang, Zhibin; Wang, Kangzhou

2017-07-01

Many nonlinear customer satisfaction-related factors significantly influence the future customer demand for service-oriented manufacturing (SOM). To address this issue and enhance the prediction accuracy, this article develops a novel customer demand prediction approach for SOM. The approach combines the phase space reconstruction (PSR) technique with the optimized least square support vector machine (LSSVM). First, the prediction sample space is reconstructed by the PSR to enrich the time-series dynamics of the limited data sample. Then, the generalization and learning ability of the LSSVM are improved by the hybrid polynomial and radial basis function kernel. Finally, the key parameters of the LSSVM are optimized by the particle swarm optimization algorithm. In a real case study, the customer demand prediction of an air conditioner compressor is implemented. Furthermore, the effectiveness and validity of the proposed approach are demonstrated by comparison with other classical predication approaches.

Extreme Programming in a Research Environment

NASA Technical Reports Server (NTRS)

Wood, William A.; Kleb, William L.

2002-01-01

This article explores the applicability of Extreme Programming in a scientific research context. The cultural environment at a government research center differs from the customer-centric business view. The chief theoretical difficulty lies in defining the customer to developer relationship. Specifically, can Extreme Programming be utilized when the developer and customer are the same person? Eight of Extreme Programming's 12 practices are perceived to be incompatible with the existing research culture. Further, six of the nine 'environments that I know don't do well with XP' apply. A pilot project explores the use of Extreme Programming in scientific research. The applicability issues are addressed and it is concluded that Extreme Programming can function successfully in situations for which it appears to be ill-suited. A strong discipline for mentally separating the customer and developer roles is found to be key for applying Extreme Programming in a field that lacks a clear distinction between the customer and the developer.

Fully printable, strain-engineered electronic wrap for customizable soft electronics.

PubMed

Byun, Junghwan; Lee, Byeongmoon; Oh, Eunho; Kim, Hyunjong; Kim, Sangwoo; Lee, Seunghwan; Hong, Yongtaek

2017-03-24

Rapid growth of stretchable electronics stimulates broad uses in multidisciplinary fields as well as industrial applications. However, existing technologies are unsuitable for implementing versatile applications involving adaptable system design and functions in a cost/time-effective way because of vacuum-conditioned, lithographically-predefined processes. Here, we present a methodology for a fully printable, strain-engineered electronic wrap as a universal strategy which makes it more feasible to implement various stretchable electronic systems with customizable layouts and functions. The key aspects involve inkjet-printed rigid island (PRI)-based stretchable platform technology and corresponding printing-based automated electronic functionalization methodology, the combination of which provides fully printed, customized layouts of stretchable electronic systems with simplified process. Specifically, well-controlled contact line pinning effect of printed polymer solution enables the formation of PRIs with tunable thickness; and surface strain analysis on those PRIs leads to the optimized stability and device-to-island fill factor of strain-engineered electronic wraps. Moreover, core techniques of image-based automated pinpointing, surface-mountable device based electronic functionalizing, and one-step interconnection networking of PRIs enable customized circuit design and adaptable functionalities. To exhibit the universality of our approach, multiple types of practical applications ranging from self-computable digital logics to display and sensor system are demonstrated on skin in a customized form.

Fully printable, strain-engineered electronic wrap for customizable soft electronics

NASA Astrophysics Data System (ADS)

Byun, Junghwan; Lee, Byeongmoon; Oh, Eunho; Kim, Hyunjong; Kim, Sangwoo; Lee, Seunghwan; Hong, Yongtaek

2017-03-01

Rapid growth of stretchable electronics stimulates broad uses in multidisciplinary fields as well as industrial applications. However, existing technologies are unsuitable for implementing versatile applications involving adaptable system design and functions in a cost/time-effective way because of vacuum-conditioned, lithographically-predefined processes. Here, we present a methodology for a fully printable, strain-engineered electronic wrap as a universal strategy which makes it more feasible to implement various stretchable electronic systems with customizable layouts and functions. The key aspects involve inkjet-printed rigid island (PRI)-based stretchable platform technology and corresponding printing-based automated electronic functionalization methodology, the combination of which provides fully printed, customized layouts of stretchable electronic systems with simplified process. Specifically, well-controlled contact line pinning effect of printed polymer solution enables the formation of PRIs with tunable thickness; and surface strain analysis on those PRIs leads to the optimized stability and device-to-island fill factor of strain-engineered electronic wraps. Moreover, core techniques of image-based automated pinpointing, surface-mountable device based electronic functionalizing, and one-step interconnection networking of PRIs enable customized circuit design and adaptable functionalities. To exhibit the universality of our approach, multiple types of practical applications ranging from self-computable digital logics to display and sensor system are demonstrated on skin in a customized form.

Fully printable, strain-engineered electronic wrap for customizable soft electronics

PubMed Central

Byun, Junghwan; Lee, Byeongmoon; Oh, Eunho; Kim, Hyunjong; Kim, Sangwoo; Lee, Seunghwan; Hong, Yongtaek

2017-01-01

Rapid growth of stretchable electronics stimulates broad uses in multidisciplinary fields as well as industrial applications. However, existing technologies are unsuitable for implementing versatile applications involving adaptable system design and functions in a cost/time-effective way because of vacuum-conditioned, lithographically-predefined processes. Here, we present a methodology for a fully printable, strain-engineered electronic wrap as a universal strategy which makes it more feasible to implement various stretchable electronic systems with customizable layouts and functions. The key aspects involve inkjet-printed rigid island (PRI)-based stretchable platform technology and corresponding printing-based automated electronic functionalization methodology, the combination of which provides fully printed, customized layouts of stretchable electronic systems with simplified process. Specifically, well-controlled contact line pinning effect of printed polymer solution enables the formation of PRIs with tunable thickness; and surface strain analysis on those PRIs leads to the optimized stability and device-to-island fill factor of strain-engineered electronic wraps. Moreover, core techniques of image-based automated pinpointing, surface-mountable device based electronic functionalizing, and one-step interconnection networking of PRIs enable customized circuit design and adaptable functionalities. To exhibit the universality of our approach, multiple types of practical applications ranging from self-computable digital logics to display and sensor system are demonstrated on skin in a customized form. PMID:28338055

Nonlinear ultrasonic measurements with EMATs for detecting pre-cracking fatigue damage

NASA Astrophysics Data System (ADS)

Cobb, A.; Capps, M.; Duffer, C.; Feiger, J.; Robinson, K.; Hollingshaus, B.

2012-05-01

This paper describes an approach for measuring material degradation using nonlinear acoustics. The importance of this measurement is that prior efforts have shown that the degree of acoustic nonlinearity increases as a function of fatigue damage accumulation. By exploiting this physical mechanism, there is the potential to develop methods for measuring the remaining life of critical components. The challenge with existing approaches for measuring acoustic nonlinearity is that primarily they have only been shown to be successful in a laboratory setting. This paper presents a potential approach for field measurement of acoustic nonlinearity that utilizes Rayleigh waves generated from electromagnetic acoustic transducers (EMATs). Rayleigh waves have unique advantages because the sound propagates along the surface, allowing for application on complex engineering structures. EMATs were used in place of traditional piezoelectric transducers because the sound is generated directly in the metallic structure, eliminating the need for sound coupling fluids that are a source of variability. Custom EMATs were developed and nonlinearity measurements were performed on 410 stainless steel specimens that were subjected to a fatigue process. Some experiments showed an increase in the acoustic nonlinearity of up to 500% compared to the unfatigued value. Other experiments had too much scatter and did not show this relationship consistently due to unanticipated challenges in producing repeatable measurements. Lessons learned from the project effort will be presented to potentially improve the repeatability of the measurement approach. If the scatter can be reduced, this EMAT-based technique could result in a field deployable prognosis tool.

A highly reliable, autonomous data communication subsystem for an advanced information processing system

NASA Technical Reports Server (NTRS)

Nagle, Gail; Masotto, Thomas; Alger, Linda

1990-01-01

The need to meet the stringent performance and reliability requirements of advanced avionics systems has frequently led to implementations which are tailored to a specific application and are therefore difficult to modify or extend. Furthermore, many integrated flight critical systems are input/output intensive. By using a design methodology which customizes the input/output mechanism for each new application, the cost of implementing new systems becomes prohibitively expensive. One solution to this dilemma is to design computer systems and input/output subsystems which are general purpose, but which can be easily configured to support the needs of a specific application. The Advanced Information Processing System (AIPS), currently under development has these characteristics. The design and implementation of the prototype I/O communication system for AIPS is described. AIPS addresses reliability issues related to data communications by the use of reconfigurable I/O networks. When a fault or damage event occurs, communication is restored to functioning parts of the network and the failed or damage components are isolated. Performance issues are addressed by using a parallelized computer architecture which decouples Input/Output (I/O) redundancy management and I/O processing from the computational stream of an application. The autonomous nature of the system derives from the highly automated and independent manner in which I/O transactions are conducted for the application as well as from the fact that the hardware redundancy management is entirely transparent to the application.

Focusing on customer service.

PubMed

1996-01-01

This booklet is devoted to a consideration of how good customer service in family planning programs can generate demand for products and services, bring customers back, and reduce costs. Customer service is defined as increasing client satisfaction through continuous concern for client preferences, staff accountability to clients, and respect for the rights of clients. Issues discussed include the introduction of a customer service approach and gaining staff commitment. The experience of PROSALUD in Bolivia in recruiting appropriate staff, supervising staff, soliciting client feedback, and marketing services is offered as an example of a successful customer service approach. The key customer service functions are described as 1) establishing a welcoming atmosphere, 2) streamlining client flow, 3) personalizing client services, and 4) organizing and providing clear information to clients. The role of the manager in developing procedures is explored, and the COPE (Client-Oriented Provider-Efficient) process is presented as a good way to begin to make improvements. Techniques in staff training in customer service include brainstorming, role playing, using case studies (examples of which are provided), and engaging in practice sessions. Training also leads to the development of effective customer service attitudes, and the differences between these and organizational/staff-focused attitudes are illustrated in a chart. The use of communication skills (asking open-ended questions, helping clients express their concerns, engaging in active listening, and handling difficult situations) is considered. Good recovery skills are important when things go wrong. Gathering and using client feedback is the next topic considered. This involves identifying, recording, and discussing customer service issues as well as taking action on these issues and evaluating the results. The booklet ends by providing a sample of customer service indicators, considering the maintenance of a customer service focus, and reporting comments from the reviewers of the booklet.

The power of cross-functional teams in driving total quality

NASA Astrophysics Data System (ADS)

McClung, Tim M.; McMaster, Tom J.

Garrett Canada, a Division of Allied-Signal Aerospace Canada, has been a member of the Canadian aerospace industry for 40 years. Although Garrett Canada has always been a profitable division with a solid market share, the changing and turbulent business environment and globalization of the aerospace industry has created new demands and challenges. The marketplace is demanding faster introduction of new products, as well as shorter leadtimes for repairs and spares. It was recognized that reducing cycle times for new products and for ongoing production would not only satisfy our customers, it would also enhance our business performance through reduced inventories, lower past due, and more responsiveness to change. It was evident that drastic function changes were required if we were to maintain our position as a premier aerospace supplier. The challenge was to convert a stable, somewhat slow-paced work environment with strong functional boundaries into a boundaryless world class team functioning in a total quality environment and focused on customer satisfaction. Complete and uncompromised customer satisfaction has become our driving force, with Total Quality being our engine to continuously improve our processes and increase our speed. The way in which this transition has been brought about is the subject of this presentation.

The power of cross-functional teams in driving total quality

NASA Technical Reports Server (NTRS)

Mcclung, Tim M.; Mcmaster, Tom J.

1992-01-01

Garrett Canada, a Division of Allied-Signal Aerospace Canada, has been a member of the Canadian aerospace industry for 40 years. Although Garrett Canada has always been a profitable division with a solid market share, the changing and turbulent business environment and globalization of the aerospace industry has created new demands and challenges. The marketplace is demanding faster introduction of new products, as well as shorter leadtimes for repairs and spares. It was recognized that reducing cycle times for new products and for ongoing production would not only satisfy our customers, it would also enhance our business performance through reduced inventories, lower past due, and more responsiveness to change. It was evident that drastic function changes were required if we were to maintain our position as a premier aerospace supplier. The challenge was to convert a stable, somewhat slow-paced work environment with strong functional boundaries into a boundaryless world class team functioning in a total quality environment and focused on customer satisfaction. Complete and uncompromised customer satisfaction has become our driving force, with Total Quality being our engine to continuously improve our processes and increase our speed. The way in which this transition has been brought about is the subject of this presentation.

Application of Probabilistic Methods for the Determination of an Economically Robust HSCT Configuration

NASA Technical Reports Server (NTRS)

Mavris, Dimitri N.; Bandte, Oliver; Schrage, Daniel P.

1996-01-01

This paper outlines an approach for the determination of economically viable robust design solutions using the High Speed Civil Transport (HSCT) as a case study. Furthermore, the paper states the advantages of a probability based aircraft design over the traditional point design approach. It also proposes a new methodology called Robust Design Simulation (RDS) which treats customer satisfaction as the ultimate design objective. RDS is based on a probabilistic approach to aerospace systems design, which views the chosen objective as a distribution function introduced by so called noise or uncertainty variables. Since the designer has no control over these variables, a variability distribution is defined for each one of them. The cumulative effect of all these distributions causes the overall variability of the objective function. For cases where the selected objective function depends heavily on these noise variables, it may be desirable to obtain a design solution that minimizes this dependence. The paper outlines a step by step approach on how to achieve such a solution for the HSCT case study and introduces an evaluation criterion which guarantees the highest customer satisfaction. This customer satisfaction is expressed by the probability of achieving objective function values less than a desired target value.

Freeze concentration of dairy products: Phase 2. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Best, D.E.; Vasavada, K.C.; Woolf, H.

1995-10-01

Conventional dairy industry evaporators convert an estimated 60 billion pounds of milk and whey products annually into dairy powders. However, many evaporators currently used by dairy processors are old and inefficient and damage the dairy powders through heat abuse. This results in lost organoleptic and functional qualities in the finished dairy products. EPRI report EM-5232 indicated that substitution of freeze concentration for evaporation and distillation in all feasible industry applications could save customers $5.5 billion annually, while increasing electric power consumption by 20 billion kWt/yr. EPRI CU-6292 reported on Phase I work, concluding that freeze concentration of dairy products wasmore » technically feasible based on pilot plant studies. The semicommercial-scale Process development units was successfully installed and brought up to 3-A processing standards. This unit achieved continuous runs of up to 510 hours. An expert safety panel affirmed the generally recognized as safe (GRAS) status of freeze-concentrated milk ingredients, which were used in formulating ice cream, cream cheese, milk chocolate, and other products for consumer evaluation. Consumer evaluations documented that the functional and organoleptic properties of reconstituted freeze-concentrated skim milk are equal or superior to those of fresh skim milk, skim milk concentrates, or nonfat dry milk powders.« less

Optimizing Soft Tissue Management and Spacer Design in Segmental Bone Defects

DTIC Science & Technology

2016-12-01

proximal and distal bone segments. 3. Debride 10 grams of tibialis anterior and gastrocnemius muscles. 4. Place an interlocking intramedullary nail ...using a custom spacer to maintain 5-cm defect length. 5. Place a pre-molded 5 cm long x 2 cm diameter PMMA spacer around the nail in the defect. 6...tibia. 3. Open the IM surrounding the PMMA spacer using a “bomb bay door opening”. 4. Remove the spacer without damaging the membrane or nail . 5

76 FR 36950 - Self-Regulatory Organizations; The NASDAQ Stock Market LLC; Notice of Filing and Immediate...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-23

... making markets on NOM. Anti-internalization processing is available only to market makers and only on an... interest from the same firm when performing the same market making function. \\4\\ See, e.g., NASDAQ Rule... public customers. Options market makers generally do not display customer orders in market making...

How to achieve customer service through short-cycle paperwork.

PubMed

Hunter, M

1998-02-01

The ultimate goal of short-cycle paperwork is to satisfy customers by filling their orders as quickly as possible. Tools and techniques that can help achieve this goal include Just-in-Time paperwork elimination, process mapping, paper flow mapping, function/process mapping, work cells, and electronic kanban. Each of these is described briefly in the article.

COPD case finding by spirometry in high-risk customers of urban community pharmacies: a pilot study.

PubMed

Castillo, D; Guayta, R; Giner, J; Burgos, F; Capdevila, C; Soriano, J B; Barau, M; Casan, P

2009-06-01

COPD case finding is currently recommended at primary and tertiary care levels only. To evaluate the feasibility of a community pharmacy program for COPD case finding in high-risk customers by means of spirometry. Pilot cross-sectional descriptive study in 13 urban community pharmacies in Barcelona, Spain, from April to May 2007. Customers >40 years old with respiratory symptoms and/or a history of smoking were invited to participate in the study during pharmacists' routine work shifts. High-risk customers were identified by means of a 5-item COPD screening questionnaire based on criteria of the Global Initiative for Chronic Obstructive Lung Disease, and were invited to perform spirometry accordingly. Those with an FEV(1)/FVC ratio less than 0.70 were referred to the hospital for a repeat spirometry. Of the 161 pharmacy customers studied, 100 (62%) scored 3 or more items in the COPD screening questionnaire, and after spirometry, 21 (24%) had an FEV(1)/FVC ratio<0.7. When these subjects with airflow limitation were offered referral to a hospital respiratory function laboratory for further assessments, 11 (52%) attended the appointment. Over 70% of spirometries were rated as being of acceptable quality. No significant differences were observed in lung function parameters between the pharmacy and hospital measurements. COPD case finding by spirometry in high-risk customers of urban community pharmacies is feasible. Similarly to primary care practitioners, pharmacists have access to high-risk, middle-aged subjects who have never been tested for COPD. Pharmacists can help with early detection of COPD if they are correctly trained.

Rendezvous, proximity operations and capture quality function deployment report

NASA Technical Reports Server (NTRS)

Lamkin, Stephen L. (Editor)

1991-01-01

Rendezvous, Proximity Operations, and Capture (RPOC) is a missions operations area which is extremely important to present and future space initiatives and must be well planned and coordinated. To support this, a study team was formed to identify a specific plan of action using the Quality Function Deployment (QFD) process. This team was composed of members from a wide spectrum of engineering and operations organizations which are involved in the RPOC technology area. The key to this study's success is an understanding of the needs of potential programmatic customers and the technology base available for system implementation. To this end, the study team conducted interviews with a variety of near term and future programmatic customers and technology development sponsors. The QFD activity led to a thorough understanding of the needs of these customers in the RPOC area, as well as the relative importance of these needs.

Hawaiian Electric Advanced Inverter Grid Support Function Laboratory Validation and Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nelson, Austin; Nagarajan, Adarsh; Prabakar, Kumar

The objective for this test plan was to better understand how to utilize the performance capabilities of advanced inverter functions to allow the interconnection of distributed energy resource (DER) systems to support the new Customer Self-Supply, Customer Grid-Supply, and other future DER programs. The purpose of this project was: 1) to characterize how the tested grid supportive inverters performed the functions of interest, 2) to evaluate the grid supportive inverters in an environment that emulates the dynamics of O'ahu's electrical distribution system, and 3) to gain insight into the benefits of the grid support functions on selected O'ahu island distributionmore » feeders. These goals were achieved through laboratory testing of photovoltaic inverters, including power hardware-in-the-loop testing.« less

Impact of genomic damage and ageing on stem cell function

PubMed Central

Behrens, Axel; van Deursen, Jan M.; Rudolph, K. Lenhard; Schumacher, Björn

2014-01-01

Impairment of stem cell function contributes to the progressive deterioration of tissue maintenance and repair with ageing. Evidence is mounting that age-dependent accumulation of DNA damage in both stem cells and cells that comprise the stem cell microenvironment are partly responsible for stem cell dysfunction with ageing. Here, we review the impact of the various types of DNA damage that accumulate with ageing on stem cell functionality, as well as the development of cancer. We discuss DNA-damage-induced cell intrinsic and extrinsic alterations that influence these processes, and review recent advances in understanding systemic adjustments to DNA damage and how they affect stem cells. PMID:24576896

Customizing Laboratory Information Systems: Closing the Functionality Gap.

PubMed

Gershkovich, Peter; Sinard, John H

2015-09-01

Highly customizable laboratory information systems help to address great variations in laboratory workflows, typical in Pathology. Often, however, built-in customization tools are not sufficient to add all of the desired functionality and improve systems interoperability. Emerging technologies and advances in medicine often create a void in functionality that we call a functionality gap. These gaps have distinct characteristics—a persuasive need to change the way a pathology group operates, the general availability of technology to address the missing functionality, the absence of this technology from your laboratory information system, and inability of built-in customization tools to address it. We emphasize the pervasive nature of these gaps, the role of pathology informatics in closing them, and suggest methods on how to achieve that. We found that a large number of the papers in the Journal of Pathology Informatics are concerned with these functionality gaps, and an even larger proportion of electronic posters and abstracts presented at the Pathology Informatics Summit conference each year deal directly with these unmet needs in pathology practice. A rapid, continuous, and sustainable approach to closing these gaps is critical for Pathology to provide the highest quality of care, adopt new technologies, and meet regulatory and financial challenges. The key element of successfully addressing functionality gaps is gap ownership—the ability to control the entire pathology information infrastructure with access to complementary systems and components. In addition, software developers with detailed domain expertise, equipped with right tools and methodology can effectively address these needs as they emerge.

3D Printed, Customized Cranial Implant for Surgical Planning

NASA Astrophysics Data System (ADS)

Bogu, Venkata Phanindra; Ravi Kumar, Yennam; Asit Kumar, Khanra

2018-06-01

The main objective of the present work is to model cranial implant and printed in FDM machine (printer model used: mojo). Actually this is peculiar case and the skull has been damaged in frontal, parietal and temporal regions and a small portion of frontal region damaged away from saggital plane, complexity is to fill this frontal region with proper curvature. The Patient CT-data (Number of slices was 381 and thickness of each slice is 0.488 mm) was processed in mimics14.1 software, mimics file was sent to 3-matic software and calculated thickness of skull at different sections where cranial implant is needed then corrected the edges of cranial implant to overcome CSF (cerebrospinal fluid) leakage and proper fitting. Finally the implant average thickness is decided as 2.5 mm and printed in FDM machine with ABS plastic.

3D Printed, Customized Cranial Implant for Surgical Planning

NASA Astrophysics Data System (ADS)

Bogu, Venkata Phanindra; Ravi Kumar, Yennam; Asit Kumar, Khanra

2016-06-01

The main objective of the present work is to model cranial implant and printed in FDM machine (printer model used: mojo). Actually this is peculiar case and the skull has been damaged in frontal, parietal and temporal regions and a small portion of frontal region damaged away from saggital plane, complexity is to fill this frontal region with proper curvature. The Patient CT-data (Number of slices was 381 and thickness of each slice is 0.488 mm) was processed in mimics14.1 software, mimics file was sent to 3-matic software and calculated thickness of skull at different sections where cranial implant is needed then corrected the edges of cranial implant to overcome CSF (cerebrospinal fluid) leakage and proper fitting. Finally the implant average thickness is decided as 2.5 mm and printed in FDM machine with ABS plastic.

A damage mechanics based approach to structural deterioration and reliability

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bhattcharya, B.; Ellingwood, B.

1998-02-01

Structural deterioration often occurs without perceptible manifestation. Continuum damage mechanics defines structural damage in terms of the material microstructure, and relates the damage variable to the macroscopic strength or stiffness of the structure. This enables one to predict the state of damage prior to the initiation of a macroscopic flaw, and allows one to estimate residual strength/service life of an existing structure. The accumulation of damage is a dissipative process that is governed by the laws of thermodynamics. Partial differential equations for damage growth in terms of the Helmholtz free energy are derived from fundamental thermodynamical conditions. Closed-form solutions tomore » the equations are obtained under uniaxial loading for ductile deformation damage as a function of plastic strain, for creep damage as a function of time, and for fatigue damage as function of number of cycles. The proposed damage growth model is extended into the stochastic domain by considering fluctuations in the free energy, and closed-form solutions of the resulting stochastic differential equation are obtained in each of the three cases mentioned above. A reliability analysis of a ring-stiffened cylindrical steel shell subjected to corrosion, accidental pressure, and temperature is performed.« less

Let thy left brain know what thy right brain doeth: Inter-hemispheric compensation of functional deficits after brain damage.

PubMed

Bartolomeo, Paolo; Thiebaut de Schotten, Michel

2016-12-01

Recent evidence revealed the importance of inter-hemispheric communication for the compensation of functional deficits after brain damage. This review summarises the biological consequences observed using histology as well as the longitudinal findings measured with magnetic resonance imaging methods in brain damaged animals and patients. In particular, we discuss the impact of post-stroke brain hyperactivity on functional recovery in relation to time. The reviewed evidence also suggests that the proportion of the preserved functional network both in the lesioned and in the intact hemispheres, rather than the simple lesion location, determines the extent of functional recovery. Hence, future research exploring longitudinal changes in patients with brain damage may unveil potential biomarkers underlying functional recovery. Copyright © 2016 Elsevier Ltd. All rights reserved.

Analysis on online word-of-mouth of customer satisfaction in cultural and creative industries of Taiwan: using cultural heritage application and performance facilities as examples

NASA Astrophysics Data System (ADS)

Tsai, Li-Fen; Shaw, Jing-Chi; Wang, Pei-Wen; Shih, Meng-Long; Su, Yi-Jing

2011-10-01

This study aims to probe into customers' online word-of-mouth regarding cultural heritage applications and performance facilities in Cultural and Creative Industries. Findings demonstrate that, regarding online word-of-mouth for art museums, museums, and art villages, items valued by customers are design aesthetics of displays and collections, educational functions, and environments and landscapes. The percentages are 10.102%, 11.208% and 11.44%, respectively. In addition, cultural heritage applications and performance facility industries in Taiwan are highly valued in online word-of-mouth.

Understanding Customers: The Jobs to Be Done Theory Applied in the Context of a Rural Food Pantry.

PubMed

Vaterlaus, J Mitchell; Cottle, Natalie Martineau; Patten, Emily Vaterlaus; Gibbons, Robyn

2018-04-28

Food insecurity, and particularly rural food insecurity, has unique challenges associated with it. Understanding the customer or patron needs is increasingly important in resolving this national concern. The Jobs to Be Done Theory posits that when considering customers, it is beneficial to move past demographic profiling and focus on what the customer wants to accomplish by using a particular product or service. This qualitative study aimed to determine customers' jobs to be done at a rural food pantry. In addition, it seeks to demonstrate the application of contemporary management theory to dietetics practice. A case study approach was used in this study. Case study data collection procedures included six male and six female food pantry patrons in Montana completing in-depth, audio-recorded interviews and surveys. Each person's interview and survey were constructed into individual case descriptions; the case descriptions were analyzed using uniform categories determined by researchers. To identify themes in the holistic case, word tables were created for each uniform category and assessed for key themes representing patrons' experiences. The key themes that emerged were the customer in context, customers' food relief needs, connecting with customers, and barriers to utilization. The application of Jobs to Be Done Theory to rural food pantry customers demonstrates that demographic segmentation does not capture the social, emotional, and functional dimensions for this sample. Investigation of customer experiences, circumstances, and obstacles is important for improving dietetics services. Copyright © 2018 Academy of Nutrition and Dietetics. Published by Elsevier Inc. All rights reserved.

49 CFR 1242.78 - Employees performing clerical and accounting functions, and loss and damage claims processing...

Code of Federal Regulations, 2010 CFR

2010-10-01

... functions, and loss and damage claims processing (accounts XX-55-76 and XX-55-78). 1242.78 Section 1242.78... Employees performing clerical and accounting functions, and loss and damage claims processing (accounts XX-55-76 and XX-55-78). If the sum of the direct freight and the direct passenger expenses is more than...

Structures and Materials Experimental Facilities and Capabilities Catalog

NASA Technical Reports Server (NTRS)

Horta, Lucas G. (Compiler); Kurtz-Husch, Jeanette D. (Compiler)

2000-01-01

The NASA Center of Excellent for Structures and Materials at Langley Research Center is responsible for conducting research and developing useable technology in the areas of advanced materials and processing technologies, durability, damage tolerance, structural concepts, advanced sensors, intelligent systems, aircraft ground operations, reliability, prediction tools, performance validation, aeroelastic response, and structural dynamics behavior for aerospace vehicles. Supporting the research activities is a complementary set of facilities and capabilities documented in this report. Because of the volume of information, the information collected was restricted in most cases to one page. Specific questions from potential customers or partners should be directed to the points of contacts provided with the various capabilities. Grouping of the equipment is by location as opposed to function. Geographical information of the various buildings housing the equipment is also provided. Since this is the first time that such an inventory is ever collected at Langley it is by no means complete. It is estimated that over 90 percent of the equipment capabilities at hand are included but equipment is continuously being updated and will be reported in the future.

Technologies for developing an advanced intelligent ATM with self-defence capabilities

NASA Astrophysics Data System (ADS)

Sako, Hiroshi

2010-01-01

We have developed several technologies for protecting automated teller machines. These technologies are based mainly on pattern recognition and are used to implement various self-defence functions. They include (i) banknote recognition and information retrieval for preventing machines from accepting counterfeit and damaged banknotes and for retrieving information about detected counterfeits from a relational database, (ii) form processing and character recognition for preventing machines from accepting remittance forms without due dates and/or insufficient payment, (iii) person identification to prevent machines from transacting with non-customers, and (iv) object recognition to guard machines against foreign objects such as spy cams that might be surreptitiously attached to them and to protect users against someone attempting to peek at their user information such as their personal identification number. The person identification technology has been implemented in most ATMs in Japan, and field tests have demonstrated that the banknote recognition technology can recognise more then 200 types of banknote from 30 different countries. We are developing an "advanced intelligent ATM" that incorporates all of these technologies.

The ATPG Attack for Reverse Engineering of Combinational Hybrid Custom-Programmable Circuits

DTIC Science & Technology

2017-03-23

The ATPG Attack for Reverse Engineering of Combinational Hybrid Custom- Programmable Circuits Raza Shafiq Hamid Mahmoodi Houman Homayoun Hassan... programmable circuits. While functionality of programmable cells are only known to trusted parties, effective techniques for activation and propagation...of the cells are introduced. The ATPG attack carefully studies dependency of programmable cells to develop their (partial) truth tables. Results

The role of reengineering in health care delivery.

PubMed

Boland, P

1996-01-01

Health care reengineering is a powerful methodology that helps organizations reorder priorities, provide more cost-effective care, and increase value to customers. It should be driven by what the customer wants and what the market needs. Systemwide reengineering integrates three levels of activity: managing community and health plan partnerships; consolidating overlapping delivery system functions among participating providers and vendors; and redesigning administrative functions, clinical services, and caregiving programs to improve health status. Reengineering is not a panacea; it is a critical core competency and requisite skill for health care organizations if they are to succeed under managed care in the future.

Research on architecture of intelligent transportation cloud platform for Guangxi expressway

NASA Astrophysics Data System (ADS)

Hua, Pan; Huang, Zhongxiang; He, Zengzhen

2017-04-01

In view of the practical needs of the intelligent transportation business collaboration, a model on intelligent traffic business collaboration is established. Aarchitecture of intelligent traffic cloud platformfor high speed road is proposed which realizes the loose coupling of each intelligent traffic business module. Based on custom technology in database design, it realizes the dynamic customization of business function which means that different roles can dynamically added business functions according to the needs. Through its application in the development and implementation of the actual business system, the architecture is proved to be effective and feasible.

Teaming up to crack innovation and enterprise integration.

PubMed

Cash, James I; Earl, Michael J; Morison, Robert

2008-11-01

In the continuing quest for business growth, many CEOs are turning to their CIOs and IT organizations because technology is essential to two compelling sources of growth: innovation and integration. Innovation, of course, is doing new things that customers ultimately appreciate and value--not only developing new generations of products, services, channels, and customer experience but also conceiving new business processes and models. Integration is making the multiple units, functions, and sites of large organizations work together to increase capacity, improve performance, lower cost structure, and discover opportunities for improvement that don't appear until you look across functions.

Residual strength of GFR/POM as a function of damage

NASA Astrophysics Data System (ADS)

Zachariev, G.; Rudolph, H.-V.; Ivers, H.

2010-07-01

A relation between the residual strength and the dispersed damage accumulated in a short fiber reinforced polyoximethylene (GFR/POM) samples under tension is found. For that purpose dependencies of damage and residual strength on loading percentage are used. Damage as a function of loading percentage is known for the material under study. To find the dependency of residual strength on loading percentage a subsidiary function is introduced and a method is proposed for determination of the parameters in the dependency on the basis of the experimental data. Both damage and residual strength are measured after unloading samples that have been loaded applying different loading percentages. Damage is the accumulation of new internal surfaces that arise under mechanical loading in the whole volume of the material. They are registered by a new original method of X-ray refraction. The analytical relation between the residual strength and damage accumulated is compared to the experimental results found for the residual strength under different damage degrees.

The Researches on Damage Detection Method for Truss Structures

NASA Astrophysics Data System (ADS)

Wang, Meng Hong; Cao, Xiao Nan

2018-06-01

This paper presents an effective method to detect damage in truss structures. Numerical simulation and experimental analysis were carried out on a damaged truss structure under instantaneous excitation. The ideal excitation point and appropriate hammering method were determined to extract time domain signals under two working conditions. The frequency response function and principal component analysis were used for data processing, and the angle between the frequency response function vectors was selected as a damage index to ascertain the location of a damaged bar in the truss structure. In the numerical simulation, the time domain signal of all nodes was extracted to determine the location of the damaged bar. In the experimental analysis, the time domain signal of a portion of the nodes was extracted on the basis of an optimal sensor placement method based on the node strain energy coefficient. The results of the numerical simulation and experimental analysis showed that the damage detection method based on the frequency response function and principal component analysis could locate the damaged bar accurately.

Development of Real-Time System for Urban Flooding by Surcharge of Storm Drainge and River Inundation

NASA Astrophysics Data System (ADS)

Shim, J. B.; Won, C. Y.; Park, J.; Lee, K.

2017-12-01

Korea experiences frequent flood disasters, which cause considerable economic losses and damages to towns and farms. Especially, a regional torrential storm is about 98.5mm/hr on September 21, 2010 in Seoul. The storm exceeds the capacity of urban drainage system of 75mm/hr, and 9,419 houses. How to monitor and control the urban flood disasters is an important issue in Korea. To mitigate the flood damage, a customizing system was developed to estimate urban floods and inundation using by integrating drainage system data and river information database which are managed by local governments and national agencies. In the case of Korean urban city, there are a lot of detention ponds and drainage pumping stations on end of drainage system and flow is going into river. The drainage pumping station, it is very important hydraulic facility for flood control between river and drainage system. So, it is possible to occur different patterns of flood inundation according to operation rule of drainage pumping station. A flood disaster is different damage as how to operate drainage pumping station and plan operation rule.

Quality evaluation in health care services based on customer-provider relationships.

PubMed

Eiriz, Vasco; Figueiredo, José António

2005-01-01

To develop a framework for evaluating the quality of Portuguese health care organisations based on the relationship between customers and providers, to define key variables related to the quality of health care services based on a review of the available literature, and to establish a conceptual framework in order to test the framework and variables empirically. Systematic review of the literature. Health care services quality should not be evaluated exclusively by customers. Given the complexity, ambiguity and heterogeneity of health care services, the authors develop a framework for health care evaluation based on the relationship between customers (patients, their relatives and citizens) and providers (managers, doctors, other technical staff and non-technical staff), and considering four quality items (customer service orientation, financial performance, logistical functionality and level of staff competence). This article identifies important changes in the Portuguese health care industry, such as the ownership of health care providers. At the same time, customers are changing their attitudes towards health care, becoming much more concerned and demanding of health services. These changes are forcing Portuguese private and public health care organisations to develop more marketing-oriented services. This article recognises the importance of quality evaluation of health care services as a means of increasing customer satisfaction and organisational efficiency, and develops a framework for health care evaluation based on the relationship between customers and providers.

Accelerating the Delivery of Home Performance Upgrades through a Synergistic Business Model

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schirber, Tom; Ojczyk, Cindy

Achieving Building America energy savings goals (40% by 2030) will require many existing homes to install energy upgrades. Engaging large numbers of homeowners in building science-guided upgrades during a single remodeling event has been difficult for a number of reasons. Performance upgrades in existing homes tend to occur over multiple years and usually result from component failures (furnace failure) and weather damage (ice dams, roofing, siding). This research attempted to: A) understand the homeowner's motivations regarding investing in building science based performance upgrades; B) determining a rapidly scalable approach to engage large numbers of homeowners directly through existing customer networks;more » and C) access a business model that will manage all aspects of the contractor-homeowner-performance professional interface to ensure good upgrade decisions over time. The solution results from a synergistic approach utilizing networks of suppliers merging with networks of homeowner customers. Companies in the $400 to $800 billion home services industry have proven direct marketing and sales proficiencies that have led to the development of vast customer networks. Companies such as pest control, lawn care, and security have nurtured these networks by successfully addressing the ongoing needs of homes. This long-term access to customers and trust established with consistent delivery has also provided opportunities for home service providers to grow by successfully introducing new products and services like attic insulation and air sealing. The most important component for success is a business model that will facilitate and manage the process. The team analyzes a group that developed a working model.« less

A green vehicle routing problem with customer satisfaction criteria

NASA Astrophysics Data System (ADS)

Afshar-Bakeshloo, M.; Mehrabi, A.; Safari, H.; Maleki, M.; Jolai, F.

2016-12-01

This paper develops an MILP model, named Satisfactory-Green Vehicle Routing Problem. It consists of routing a heterogeneous fleet of vehicles in order to serve a set of customers within predefined time windows. In this model in addition to the traditional objective of the VRP, both the pollution and customers' satisfaction have been taken into account. Meanwhile, the introduced model prepares an effective dashboard for decision-makers that determines appropriate routes, the best mixed fleet, speed and idle time of vehicles. Additionally, some new factors evaluate the greening of each decision based on three criteria. This model applies piecewise linear functions (PLFs) to linearize a nonlinear fuzzy interval for incorporating customers' satisfaction into other linear objectives. We have presented a mixed integer linear programming formulation for the S-GVRP. This model enriches managerial insights by providing trade-offs between customers' satisfaction, total costs and emission levels. Finally, we have provided a numerical study for showing the applicability of the model.

A study on M/G/1 retrial G - queue with two phases of service, immediate feedback and working vacations

NASA Astrophysics Data System (ADS)

Varalakshmi, M.; Chandrasekaran, V. M.; Saravanarajan, M. C.

2017-11-01

In this paper, we discuss about the steady state behaviour of M/G/1 retrial queueing system with two phases of services and immediate feedbacks under working vacation policy where the regular busy server is affected due to the arrival of negative customers. Upon arrival if the customer finds the server busy, breakdown or on working vacation it enters an orbit; otherwise the customer enters into the service area immediately. After service completion, the customer is allowed to make finite number of immediate feedback. The feedback service also consists of two phases. At the service completion epoch of a positive customer, if the orbit is empty the server goes for a working vacation. The server works at a lower service rate during working vacation (WV) period. Using the supplementary variable technique, we found out the steady state probability generating function for the system and in orbit. System performance measures and reliability measures are discussed. Finally, some numerical examples are presented to validate the analyticalresults.

Integration of QFD, AHP, and LPP methods in supplier development problems under uncertainty

NASA Astrophysics Data System (ADS)

Shad, Zahra; Roghanian, Emad; Mojibian, Fatemeh

2014-04-01

Quality function deployment (QFD) is a customer-driven approach, widely used to develop or process new product to maximize customer satisfaction. Last researches used linear physical programming (LPP) procedure to optimize QFD; however, QFD issue involved uncertainties, or fuzziness, which requires taking them into account for more realistic study. In this paper, a set of fuzzy data is used to address linguistic values parameterized by triangular fuzzy numbers. Proposed integrated approach including analytic hierarchy process (AHP), QFD, and LPP to maximize overall customer satisfaction under uncertain conditions and apply them in the supplier development problem. The fuzzy AHP approach is adopted as a powerful method to obtain the relationship between the customer requirements and engineering characteristics (ECs) to construct house of quality in QFD method. LPP is used to obtain the optimal achievement level of the ECs and subsequently the customer satisfaction level under different degrees of uncertainty. The effectiveness of proposed method will be illustrated by an example.

Study of cumulative fatigue damage detection for used parts with nonlinear output frequency response functions based on NARMAX modelling

NASA Astrophysics Data System (ADS)

Huang, Honglan; Mao, Hanying; Mao, Hanling; Zheng, Weixue; Huang, Zhenfeng; Li, Xinxin; Wang, Xianghong

2017-12-01

Cumulative fatigue damage detection for used parts plays a key role in the process of remanufacturing engineering and is related to the service safety of the remanufactured parts. In light of the nonlinear properties of used parts caused by cumulative fatigue damage, the based nonlinear output frequency response functions detection approach offers a breakthrough to solve this key problem. First, a modified PSO-adaptive lasso algorithm is introduced to improve the accuracy of the NARMAX model under impulse hammer excitation, and then, an effective new algorithm is derived to estimate the nonlinear output frequency response functions under rectangular pulse excitation, and a based nonlinear output frequency response functions index is introduced to detect the cumulative fatigue damage in used parts. Then, a novel damage detection approach that integrates the NARMAX model and the rectangular pulse is proposed for nonlinear output frequency response functions identification and cumulative fatigue damage detection of used parts. Finally, experimental studies of fatigued plate specimens and used connecting rod parts are conducted to verify the validity of the novel approach. The obtained results reveal that the new approach can detect cumulative fatigue damages of used parts effectively and efficiently and that the various values of the based nonlinear output frequency response functions index can be used to detect the different fatigue damages or working time. Since the proposed new approach can extract nonlinear properties of systems by only a single excitation of the inspected system, it shows great promise for use in remanufacturing engineering applications.

Developing fragility functions for aquaculture rafts and eelgrass in the case of the 2011 Great East Japan tsunami

NASA Astrophysics Data System (ADS)

Suppasri, Anawat; Fukui, Kentaro; Yamashita, Kei; Leelawat, Natt; Ohira, Hiroyuki; Imamura, Fumihiko

2018-01-01

Since the two devastating tsunamis in 2004 (Indian Ocean) and 2011 (Great East Japan), new findings have emerged on the relationship between tsunami characteristics and damage in terms of fragility functions. Human loss and damage to buildings and infrastructures are the primary target of recovery and reconstruction; thus, such relationships for offshore properties and marine ecosystems remain unclear. To overcome this lack of knowledge, this study used the available data from two possible target areas (Mangokuura Lake and Matsushima Bay) from the 2011 Japan tsunami. This study has three main components: (1) reproduction of the 2011 tsunami, (2) damage investigation, and (3) fragility function development. First, the source models of the 2011 tsunami were verified and adjusted to reproduce the tsunami characteristics in the target areas. Second, the damage ratio (complete damage) of the aquaculture raft and eelgrass was investigated using satellite images taken before and after the 2011 tsunami through visual inspection and binarization. Third, the tsunami fragility functions were developed using the relationship between the simulated tsunami characteristics and the estimated damage ratio. Based on the statistical analysis results, fragility functions were developed for Mangokuura Lake, and the flow velocity was the main contributor to the damage instead of the wave amplitude. For example, the damage ratio above 0.9 was found to be equal to the maximum flow velocities of 1.3 m s-1 (aquaculture raft) and 3.0 m s-1 (eelgrass). This finding is consistent with the previously proposed damage criterion of 1 m s-1 for the aquaculture raft. This study is the first step in the development of damage assessment and planning for marine products and environmental factors to mitigate the effects of future tsunamis.

Damage Precursor Identification via Microstructure-Sensitive Nondestructive Evaluation

NASA Astrophysics Data System (ADS)

Wisner, Brian John

Damage in materials is a complex and stochastic process bridging several time and length scales. This dissertation focuses on investigating the damage process in a particular class of precipitate-hardened aluminum alloys which is widely used in automotive and aerospace applications. Most emphasis in the literature has been given either on their ductility for manufacturing purposes or fracture for performance considerations. In this dissertation, emphasis is placed on using nondestructive evaluation (NDE) combined with mechanical testing and characterization methods applied at a scale where damage incubation and initiation is occurring. Specifically, a novel setup built inside a Scanning Electron Microscope (SEM) and retrofitted to be combined with characterization and NDE capabilities was developed with the goal to track the early stages of the damage process in this type of material. The characterization capabilities include Electron Backscatter Diffraction (EBSD) and Energy Dispersive Spectroscopy (EDS) in addition to X-ray micro-computed tomography (μ-CT) and nanoindentation, in addition to microscopy achieved by the Secondary Electron (SE) and Back Scatter Electron (BSE) detectors. The mechanical testing inside the SEM was achieved with the use of an appropriate stage that fitted within its chamber and is capable of applying both axial and bending monotonic and cyclic loads. The NDE capabilities, beyond the microscopy and μ-CT, include the methods of Acoustic Emission and Digital Image Correlation (DIC). This setup was used to identify damage precursors in this material system and their evolution over time and space. The experimental results were analyzed by a custom signal processing scheme that involves both feature-based analyses as well as a machine learning method to relate recorded microstructural data to damage in this material. Extensions of the presented approach to include information from computational methods as well as its applicability to other material systems are discussed.

Lightning Strike Ablation Damage Influence Factors Analysis of Carbon Fiber/Epoxy Composite Based on Coupled Electrical-Thermal Simulation

NASA Astrophysics Data System (ADS)

Yin, J. J.; Chang, F.; Li, S. L.; Yao, X. L.; Sun, J. R.; Xiao, Y.

2017-10-01

According to the mathematical analysis model constructed on the basis of energy-balance relationship in lightning strike, and accompany with the simplified calculation strategy of composite resin pyrolysis degree dependent electrical conductivity, an effective three dimensional thermal-electrical coupling analysis finite element model of composite laminate suffered from lightning current was established based on ABAQUS, to elucidate the effects of lighting current waveform parameters and thermal/electrical properties of composite laminate on the extent of ablation damage. Simulated predictions agree well with the composite lightning strike directed effect experimental data, illustrating the potential accuracy of the constructed model. The analytical results revealed that extent of composite lightning strike ablation damage can be characterized by action integral validly, there exist remarkable power function relationships between action integral and visual damage area, projected damage area, maximum damage depth and damage volume of ablation damage, and enhancing the electrical conductivity and specific heat of composite, ablation damage will be descended obviously, power function relationships also exist between electrical conductivity, specific heat and ablation damage, however, the impact of thermal conductivity on the extent of ablation damage is not notable. The conclusions obtained provide some guidance for composite anti-lightning strike structure-function integration design.

Randomized controlled pilot study of customized pamphlets to promote physical activity and symptom self-management in women with multiple sclerosis.

PubMed

Plow, Matthew; Bethoux, Francois; McDaniel, Corey; McGlynn, Mark; Marcus, Bess

2014-02-01

Investigate the feasibility and potential efficacy of a customized print-based intervention to promote physical activity and symptom self-management in women with multiple sclerosis. A randomly allocated two-group repeated measures design, with a delayed-treatment contact group serving as the control. Participants were randomized to receive the intervention immediately (n =14) or receive it at week 12 (n =16). Outcome measures were administered at weeks 1, 12, and 24. Community-based in metropolitan area. Thirty women with multiple sclerosis. Prescribing a home-exercise program and following up with customized pamphlets, which are matched to participants' stage of readiness to change physical activity behavior and physical activity barriers (e.g. encouraging self-management of symptoms). Physical Activity and Disability Survey-revised, Godin Leisure-Time Exercise Questionnaire, SF-12, Symptoms of Multiple Sclerosis Scale, and 6-minute walk test. Intent-to-treat analyses using mixed multivariate analysis of variance (MANOVA) were conducted on (1) physical activity levels and (2) health and function outcomes. The mixed MANOVAs for physical activity levels and health and function outcomes indicated significant improvements in the immediate group compared with the delayed group (i.e. condition by time interaction was significant, Wilks' λ = 0.59, F(2, 27) = 9.31, P = 0.001 and Wilks' λ = 0.70, F(4, 25) = 2.72, P = 0.052, respectively). The intervention had moderate to large effect sizes in improving physical activity levels (d = 0.63 to 0.89), perceptions of physical function (d = 0.63), and 6-minute walk test (d=0.86). This pilot study indicates that a customized print-based intervention shows promise in improving physical activity levels and health and function in women with multiple sclerosis.

Explaining the heterogeneity of functional connectivity findings in multiple sclerosis: An empirically informed modeling study.

PubMed

Tewarie, Prejaas; Steenwijk, Martijn D; Brookes, Matthew J; Uitdehaag, Bernard M J; Geurts, Jeroen J G; Stam, Cornelis J; Schoonheim, Menno M

2018-06-01

To understand the heterogeneity of functional connectivity results reported in the literature, we analyzed the separate effects of grey and white matter damage on functional connectivity and networks in multiple sclerosis. For this, we employed a biophysical thalamo-cortical model consisting of interconnected cortical and thalamic neuronal populations, informed and amended by empirical diffusion MRI tractography data, to simulate functional data that mimic neurophysiological signals. Grey matter degeneration was simulated by decreasing within population connections and white matter degeneration by lowering between population connections, based on lesion predilection sites in multiple sclerosis. For all simulations, functional connectivity and functional network organization are quantified by phase synchronization and network integration, respectively. Modeling results showed that both cortical and thalamic grey matter damage induced a global increase in functional connectivity, whereas white matter damage induced an initially increased connectivity followed by a global decrease. Both white and especially grey matter damage, however, induced a decrease in network integration. These empirically informed simulations show that specific topology and timing of structural damage are nontrivial aspects in explaining functional abnormalities in MS. Insufficient attention to these aspects likely explains contradictory findings in multiple sclerosis functional imaging studies so far. © 2018 The Authors Human Brain Mapping Published by Wiley Periodicals, Inc.

An extended diffraction tomography method for quantifying structural damage using numerical Green's functions.

PubMed

Chan, Eugene; Rose, L R Francis; Wang, Chun H

2015-05-01

Existing damage imaging algorithms for detecting and quantifying structural defects, particularly those based on diffraction tomography, assume far-field conditions for the scattered field data. This paper presents a major extension of diffraction tomography that can overcome this limitation and utilises a near-field multi-static data matrix as the input data. This new algorithm, which employs numerical solutions of the dynamic Green's functions, makes it possible to quantitatively image laminar damage even in complex structures for which the dynamic Green's functions are not available analytically. To validate this new method, the numerical Green's functions and the multi-static data matrix for laminar damage in flat and stiffened isotropic plates are first determined using finite element models. Next, these results are time-gated to remove boundary reflections, followed by discrete Fourier transform to obtain the amplitude and phase information for both the baseline (damage-free) and the scattered wave fields. Using these computationally generated results and experimental verification, it is shown that the new imaging algorithm is capable of accurately determining the damage geometry, size and severity for a variety of damage sizes and shapes, including multi-site damage. Some aspects of minimal sensors requirement pertinent to image quality and practical implementation are also briefly discussed. Copyright © 2015 Elsevier B.V. All rights reserved.

Expanding Functionality of Commercial Optical Coherence Tomography Systems by Integrating a Custom Endoscope

PubMed Central

Welge, Weston A.; Barton, Jennifer K.

2015-01-01

Optical coherence tomography (OCT) is a useful imaging modality for detecting and monitoring diseases of the gastrointestinal tract and other tubular structures. The non-destructiveness of OCT enables time-serial studies in animal models. While turnkey commercial research OCT systems are plenty, researchers often require custom imaging probes. We describe the integration of a custom endoscope with a commercial swept-source OCT system and generalize this description to any imaging probe and OCT system. A numerical dispersion compensation method is also described. Example images demonstrate that OCT can visualize the mouse colon crypt structure and detect adenoma in vivo. PMID:26418811

A Custom Robotic System for Inspecting HEPA Filters in the Payload Changeout Room at the NASA Kennedy Space Center

NASA Technical Reports Server (NTRS)

Spencer, James E., Jr.; Looney, Joe

1994-01-01

In this paper, the prime objective is to describe a custom 4-dof (degree-of-freedom) robotic arm capable of autonomously or telerobotically performing systematic HEPA filter inspection and certification in the Shuttle Launch Pad Payload Changeout Rooms (PCR's) on pads A and B at the Kennedy Space Center, Florida. This HEPA filter inspection robot (HFIR) has been designed to be easily deployable and is equipped with the necessary sensory devices, control hardware, software and man-machine interfaces needed to implement HEPA filter inspection reliably and efficiently without damaging the filters or colliding with existing PCR structures or filters. The main purpose of the HFIR is to implement an automated positioning system to move special inspection sensors in pre-defined or manual patterns for the purpose of verifying filter integrity and efficiency. This will ultimately relieve NASA Payload Operations from significant problems associated with time, cost and personnel safety, impacts realized during non-automated PCR HFIR filter certification.

Dopant-specific unzipping of carbon nanotubes for intact crystalline graphene nanostructures

PubMed Central

Lim, Joonwon; Narayan Maiti, Uday; Kim, Na-Young; Narayan, Rekha; Jun Lee, Won; Sung Choi, Dong; Oh, Youngtak; Min Lee, Ju; Yong Lee, Gil; Hun Kang, Seok; Kim, Hyunwoo; Kim, Yong-Hyun; Ouk Kim, Sang

2016-01-01

Atomic level engineering of graphene-based materials is in high demand to enable customize structures and properties for different applications. Unzipping of the graphene plane is a potential means to this end, but uncontrollable damage of the two-dimensional crystalline framework during harsh unzipping reaction has remained a key challenge. Here we present heteroatom dopant-specific unzipping of carbon nanotubes as a reliable and controllable route to customized intact crystalline graphene-based nanostructures. Substitutional pyridinic nitrogen dopant sites at carbon nanotubes can selectively initiate the unzipping of graphene side walls at a relatively low electrochemical potential (0.6 V). The resultant nanostructures consisting of unzipped graphene nanoribbons wrapping around carbon nanotube cores maintain the intact two-dimensional crystallinity with well-defined atomic configuration at the unzipped edges. Large surface area and robust electrical connectivity of the synergistic nanostructure demonstrate ultrahigh-power supercapacitor performance, which can serve for AC filtering with the record high rate capability of −85° of phase angle at 120 Hz. PMID:26796993

Encryption and the loss of patient data.

PubMed

Miller, Amalia R; Tucker, Catherine E

2011-01-01

Fast-paced IT advances have made it increasingly possible and useful for firms to collect data on their customers on an unprecedented scale. One downside of this is that firms can experience negative publicity and financial damage if their data are breached. This is particularly the case in the medical sector, where we find empirical evidence that increased digitization of patient data is associated with more data breaches. The encryption of customer data is often presented as a potential solution, because encryption acts as a disincentive for potential malicious hackers, and can minimize the risk of breached data being put to malicious use. However, encryption both requires careful data management policies to be successful and does not ward off the insider threat. Indeed, we find no empirical evidence of a decrease in publicized instances of data loss associated with the use of encryption. Instead, there are actually increases in the cases of publicized data loss due to internal fraud or loss of computer equipment.

Exponential Increase in Relative Biological Effectiveness Along Distal Edge of a Proton Bragg Peak as Measured by Deoxyribonucleic Acid Double-Strand Breaks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cuaron, John J., E-mail: cuaronj@mskcc.org; Chang, Chang; Lovelock, Michael

2016-05-01

Purpose: To quantify the relative biological effectiveness (RBE) of the distal edge of the proton Bragg peak, using an in vitro assay of DNA double-strand breaks (DSBs). Methods and Materials: U2OS cells were irradiated within the plateau of a spread-out Bragg peak and at each millimeter position along the distal edge using a custom slide holder, allowing for simultaneous measurement of physical dose. A reference radiation signal was generated using photons. The DNA DSBs at 3 hours (to assess for early damage) and at 24 hours (to assess for residual damage and repair) after irradiation were measured using the γH2AX assay and quantifiedmore » via flow cytometry. Results were confirmed with clonogenic survival assays. A detailed map of the RBE as a function of depth along the Bragg peak was generated using γH2AX measurements as a biological endpoint. Results: At 3 hours after irradiation, DNA DSBs were higher with protons at every point along the distal edge compared with samples irradiated with photons to similar doses. This effect was even more pronounced after 24 hours, indicating that the impact of DNA repair is less after proton irradiation relative to photons. The RBE demonstrated an exponential increase as a function of depth and was measured to be as high as 4.0 after 3 hours and as high as 6.0 after 24 hours. When the RBE-corrected dose was plotted as a function of depth, the peak effective dose was extended 2-3 mm beyond what would be expected with physical measurement. Conclusions: We generated a highly comprehensive map of the RBE of the distal edge of the Bragg peak, using a direct assay of DNA DSBs in vitro. Our data show that the RBE of the distal edge increases with depth and is significantly higher than previously reported estimates.« less

Pilot study comparing market orientation culture of businesses and schools of business.

PubMed

Harmon, Harry A; Webster, Robert L; Hammond, Kevin L

2003-08-01

A market orientation culture has been described as one that blends an organization's commitment to customer value with a process of continuously creating superior value for customers. Developing such a culture is further described as (1) obtaining information about customers, competitors, and markets, (2) examining the gathered information from a total organizational perspective, (3) deciding how to deliver superior customer value, and (4) implementing actions to provide value to customers. A market orientation culture focuses on the customer, identifies issues in the competitive environment, and coordinates all functional areas to achieve organizational objectives. Research has found businesses with higher market orientation are more successful in achieving organizational objectives. The measurement of market orientation within businesses has been empirically tested and validated. However, empirical research on market orientation in nonprofit organizations such as universities has not been examined. This study investigated market orientation within the university setting, specifically Schools of Business Administration, and compared these data with previously published data within the business sector. Data for comparative purposes were collected via a national survey. Hypothesis testing was conducted. Results indicated significantly lower market orientation culture within the schools of business as reported by AACSB Business School Deans vis-à-vis managers of business enterprises.

Optimization of Soft Tissue Management, Spacer Design, and Grafting Strategies for Large Segmental Bone Defects using the Chronic Caprine Tibial Defect Model

DTIC Science & Technology

2016-12-01

gastrocnemius muscles. 4. Place an interlocking intramedullary nail using a custom spacer to maintain 5-cm defect length. 5. Place a pre-molded 5 cm long x...2 cm diameter PMMA spacer around the nail in the defect. 6. Irrigate the wound with normal (0.9 %) saline and close the wound. The Treatment...PMMA spacer using a “bomb bay door opening”. 4. Remove the spacer without damaging the membrane or nail . 5. Collect appropriate IM samples as

Ionizing doses and displacement damage testing of COTS CMOS imagers

NASA Astrophysics Data System (ADS)

Bernard, Frédéric; Petit, Sophie; Courtade, Sophie

2017-11-01

CMOS sensors begin to be a credible alternative to CCD sensors in some space missions. However, technology evolution of CMOS sensors is much faster than CCD one's. So a continuous technology evaluation is needed for CMOS imagers. Many of commercial COTS (Components Off The Shelf) CMOS sensors use organic filters, micro-lenses and non rad-hard technologies. An evaluation of the possibilities offered by such technologies is interesting before any custom development. This can be obtained by testing commercial COTS imagers. This article will present electro-optical performances evolution of off the shelves CMOS imagers after Ionizing Doses until 50kRad(Si) and Displacement Damage environment tests (until 1011 p/cm2 at 50 MeV). Dark current level and non uniformity evolutions are compared and discussed. Relative spectral response measurement and associated evolution with irradiation will also be presented and discussed. Tests have been performed on CNES detection benches.

Short-term effects of customized arch support insoles on symptomatic flexible flatfoot in children: A randomized controlled trial.

PubMed

Hsieh, Ru-Lan; Peng, Hui-Ling; Lee, Wen-Chung

2018-05-01

Limited evidence is available regarding the effects of insoles on pediatric flexible flatfoot because of the heterogeneity and low methodological quality of previous studies. The purpose of this prospective trial is to examine the short-term effects of customized arch support insoles on symptomatic flexible flatfoot in children by using the International Classification of Functioning, randomized controlled Disability, and Health (ICF) framework. This study was conducted in a rehabilitation outpatient clinic of a teaching hospital. Fifty-two children with symptomatic flexible flatfoot were included. The children in the treatment group wore customized arch support insoles for 12 weeks, whereas those in the control group did not wear the insoles. Both clinical and radiographic measurements, including the navicular drop, foot posture index, Beighton hypermobility score, talonavicular coverage angle, calcaneal inclination angle, and calcaneal-first metatarsal angle, were used for diagnosing flexible flatfoot. Physical activity (10-m normal and fast walking, stair ascent, stair descent, and chair rising), physical function, and psychometric properties (Pediatric Outcome Data Collection Instrument and Pediatric Quality of Life Inventory) were evaluated at the baseline and 12 weeks after the intervention. Compared with the control group, the treatment group exhibited significant improvement in pain/comfort (P = .048), physical health (P = .035), stair ascent time (P = .015), upper extremity and physical function (P = .016), and transfer and basic mobility (P = .042) during the intervention period. Children with flexible flatfoot who wore customized arch support insoles for 12 weeks exhibited significantly improved pain/comfort, physical health, stair ascent time, upper extremity and physical function, and transfer and basic mobility. These variables belong to the domains of body functions and structures and activity and participation in the ICF framework. However, because the groups were not comparable, additional studies with larger sample sizes should be conducted.

A Mobile Computing Solution for Collecting Functional Analysis Data on a Pocket PC

PubMed Central

Jackson, James; Dixon, Mark R

2007-01-01

The present paper provides a task analysis for creating a computerized data system using a Pocket PC and Microsoft Visual Basic. With Visual Basic software and any handheld device running the Windows Moble operating system, this task analysis will allow behavior analysts to program and customize their own functional analysis data-collection system. The program will allow the user to select the type of behavior to be recorded, choose between interval and frequency data collection, and summarize data for graphing and analysis. We also provide suggestions for customizing the data-collection system for idiosyncratic research and clinical needs. PMID:17624078

Manual physical therapy combined with high-intensity functional rehabilitation for severe lower extremity musculoskeletal injuries: a case series*

PubMed Central

Crowell, Michael S.; Deyle, Gail D.; Owens, Johnny; Gill, Norman W.

2016-01-01

Objectives Severe lower extremity trauma accounts for large healthcare costs and often results in elective amputation and poor long-term outcomes. The purpose of this case series is to describe an orthopedic manual physical therapy (OMPT) approach combined with a return to run (RTR) clinical pathway consisting of high-intensity functional rehabilitation with a custom energy-storing orthosis. Methods Three consecutive male patients, aged 21–23 years, with severe lower extremity musculoskeletal injuries were treated with a combined intervention that included a mean (SD) of 12 (2·1) OMPT sessions and 24 (8·7) functional rehabilitation sessions over a mean of 6 weeks (1·0). Additional training with a custom energy-storing orthosis consisted of a mean of 15 (1·2) additional sessions over 4 weeks. Patient self-report outcome measures and a variety of physical performance tests captured change in function. Results Baseline lower extremity functional scale (LEFS) and foot and ankle ability measure activities of daily living subscale (FAAM-ADL) scores indicated severe disability. All patients exceeded the minimal clinically important difference (MCID) in at least one self-report outcome or physical performance test without a brace. Two of three patients exceeded the MCID for at least two physical performance tests after training with and utilizing a custom energy-storing orthosis. Discussion Clinically meaningful changes in self-reported function or physical performance were observed in all patients. A multi-modal approach, including manual therapy and functional exercise, may address the entire spectrum of impairments in patients with severe lower extremity trauma, resulting in improvements in both braced and un-braced function. PMID:27252581

Optogenetic pacing in Drosophila melanogaster (Conference Presentation)

NASA Astrophysics Data System (ADS)

Alex, Aneesh; Li, Airong; Men, Jing; Jerwick, Jason; Tanzi, Rudolph E.; Zhou, Chao

2016-03-01

A non-invasive, contact-less cardiac pacing technology can be a powerful tool in basic cardiac research and in clinics. Currently, electrical pacing is the gold standard for cardiac pacing. Although highly effective in controlling the cardiac function, the invasive nature, non-specificity to cardiac tissues and possible tissue damage limits its capabilities. Optical pacing of heart is a promising alternative, which is non-invasive and more specific, has high spatial and temporal precision, and avoids shortcomings in electrical stimulation. Optical coherence tomography has been proved to be an effective technique in non-invasive imaging in vivo with ultrahigh resolution and imaging speed. In the last several years, non-invasive specific optical pacing in animal hearts has been reported in quail, zebrafish, and rabbit models. However， Drosophila Melanogaster, which is a significant model with orthologs of 75% of human disease genes, has rarely been studied concerning their optical pacing in heart. Here, we combined optogenetic control of Drosophila heartbeat with optical coherence microscopy (OCM) technique for the first time. The light-gated cation channel, channelrhodopsin-2 (ChR2) was specifically expressed by transgene as a pacemaker in drosophila heart. By stimulating the pacemaker with 472 nm pulsed laser light at different frequencies, we achieved non-invasive and more specific optical control of the Drosophila heart rhythm, which demonstrates the wide potential of optical pacing for studying cardiac dynamics and development. Imaging capability of our customized OCM system was also involved to observe the pacing effect visually. No tissue damage was found after long exposure to laser pulses, which proved the safety of optogenetic control of Drosophila heart.

Authentication Sensing System Using Resonance Evaluation Spectroscopy (ASSURES)

NASA Astrophysics Data System (ADS)

Trolinger, James D.; Dioumaev, Andrei K.; Lal, Amit K.; Dimas, Dave

2017-08-01

This paper describes an ongoing instrument development project to distinguish genuine manufactured components from counterfeit components; we call the instrument ASSURES (Authentication Sensing System Using Resonance Evaluation Spectroscopy). The system combines Laser Doppler Vibrometry with acoustical resonance spectroscopy, augmented with finite element analysis. Vibrational properties of components, such as resonant modes, damping, and spectral frequency response to various forcing functions depend strongly upon the mechanical properties of the material, including its size, shape, internal hardness, tensile strength, alloy/composite compositions, flaws, defects, and other internal material properties. Although acoustic resonant spectroscopy has seen limited application, the information rich signals in the vibrational spectra of objects provide a pathway to many new applications. Components with the same shape but made of different materials, different fatigue histories, damage, tampering, or heat treatment, will respond differently to high frequency stimulation. Laser Doppler Vibrometry offers high sensitivity and frequency bandwidth to measure the component's frequency spectrum, and overcomes many issues that limit conventional acoustical resonance spectroscopy, since the sensor laser beam can be aimed anywhere along the part as well as to multiple locations on a part in a non-contact way. ASSURES is especially promising for use in additive manufacturing technology by providing signatures as digital codes that are unique to specific objects and even to specific locations on objects. We believe that such signatures can be employed to address many important issues in the manufacturing industry. These include insuring the part meets the often very rigid specifications of the customer and being able to detect non-visible internal manufacturing defects or non-visible damage that has occurred after manufacturing.

Search for optimized conditions for sealing and storage of bypass vessels: influence of preservation solution and filling pressure on the degree of endothelialization

PubMed Central

Weiss, Dominik Roger; Juchem, Gerd; Eblenkamp, Markus; Kemkes, Bernhard Michael; Gansera, Brigitte; Geier, Michael; Nees, Stephan

2010-01-01

The aim of the present study was to develop methods for the rapid assessment of intimal quality of coronary bypass segments of venous origin, and to prevent endothelial damage by improved intraoperative handling of graft segments. Particular attention was paid to the influence of the composition of the preservation solution and the intravasal filling pressure on the degree of endothelialization. Intrava-sal exposure to Alcian blue at pH<3 resulted in highly specific staining of intimal regions with functionally or structurally damaged endothelium. Standardization of preparation, staining and image acquisition of the intimal surface of graft remnants and subsequent computer-aided planimetry of these images made it possible for the first time to perform rapid serial investigations for quality control of bypass grafts. Using saline as the rinsing and intraoperative storage medium resulted in the loss of more than 50% of the endothelium at intravasal pressures of 0-100 mmHg. Increasing the pressure resulted eventually in complete de-endothelialization. In contrast, grafts incubated in a customized plasma derivative tolerated pressures of up to 200 mmHg with no significant endothelial loss; and even after exposure to 1,000 mmHg (10 times the average mean arterial pressure!) more than 70% of the endothelium were intact and vital. These findings imply strongly that the quality of aortocoronary bypass grafts of venous origin can be improved substantially by the use of a plasma derivative solution for intraoperative preservation and by monitoring and controlling the intravasal pressures reached during sealing and storage. PMID:20369036

Creating Shape Templates for Patient Specific Biventricular Modeling in Congenital Heart Disease

PubMed Central

Gilbert, Kathleen; Farrar, Genevieve; Cowan, Brett R.; Suinesiaputra, Avan; Occleshaw, Christopher; Pontré, Beau; Perry, James; Hegde, Sanjeet; Marsden, Alison; Omens, Jeff; McCulloch, Andrew; Young, Alistair A.

2018-01-01

Survival rates for infants with congenital heart disease (CHD) are improving, resulting in a growing population of adults with CHD. However, the analysis of left and right ventricular function is very time-consuming owing to the variety of congenital morphologies. Efficient customization of patient geometry and function depends on high quality shape templates specifically designed for the application. In this paper, we combine a method for creating finite element shape templates with an interactive template customization to patient MRI examinations. This enables different templates to be chosen depending on patient morphology. To demonstrate this pipeline, a new biventricular template with 162 elements was created and tested in place of an existing 82-element template. The method was able to provide fast interactive biventricular analysis with 0.31 sec per edit response time. The new template was customized to 13 CHD patients with similar biventricular topology, showing improved performance over the previous template and good agreement with clinical indices. PMID:26736353

Development and utilization of USGS ShakeCast for rapid post-earthquake assessment of critical facilities and infrastructure

USGS Publications Warehouse

Wald, David J.; Lin, Kuo-wan; Kircher, C.A.; Jaiswal, Kishor; Luco, Nicolas; Turner, L.; Slosky, Daniel

2017-01-01

The ShakeCast system is an openly available, near real-time post-earthquake information management system. ShakeCast is widely used by public and private emergency planners and responders, lifeline utility operators and transportation engineers to automatically receive and process ShakeMap products for situational awareness, inspection priority, or damage assessment of their own infrastructure or building portfolios. The success of ShakeCast to date and its broad, critical-user base mandates improved software usability and functionality, including improved engineering-based damage and loss functions. In order to make the software more accessible to novice users—while still utilizing advanced users’ technical and engineering background—we have developed a “ShakeCast Workbook”, a well documented, Excel spreadsheet-based user interface that allows users to input notification and inventory data and export XML files requisite for operating the ShakeCast system. Users will be able to select structure based on a minimum set of user-specified facility (building location, size, height, use, construction age, etc.). “Expert” users will be able to import user-modified structural response properties into facility inventory associated with the HAZUS Advanced Engineering Building Modules (AEBM). The goal of the ShakeCast system is to provide simplified real-time potential impact and inspection metrics (i.e., green, yellow, orange and red priority ratings) to allow users to institute customized earthquake response protocols. Previously, fragilities were approximated using individual ShakeMap intensity measures (IMs, specifically PGA and 0.3 and 1s spectral accelerations) for each facility but we are now performing capacity-spectrum damage state calculations using a more robust characterization of spectral deamnd.We are also developing methods for the direct import of ShakeMap’s multi-period spectra in lieu of the assumed three-domain design spectrum (at 0.3s for constant acceleration; 1s or 3s for constant velocity and constant displacement at very long response periods). As part of ongoing ShakeCast research and development, we will also explore the use of ShakeMap IM uncertainty estimates and evaluate the assumption of employing multiple response spectral damping values rather than the single 5%-damped value currently employed. Developing and incorporating advanced fragility assignments into the ShakeCast Workbook requires related software modifications and database improvements; these enhancements are part of an extensive rewrite of the ShakeCast application.

ECL gate array with integrated PLL-based clock recovery and synthesis for high-speed data and telecom applications

NASA Astrophysics Data System (ADS)

Rosky, David S.; Coy, Bruce H.; Friedmann, Marc D.

1992-03-01

A 2500 gate mixed signal gate array has been developed that integrates custom PLL-based clock recovery and clock synthesis functions with 2500 gates of configurable logic cells to provide a single chip solution for 200 - 1244 MHz fiber based digital interface applications. By customizing the digital logic cells, any of the popular telecom and datacom standards may be implemented.

Network Science Research Laboratory (NSRL) Telemetry Warehouse

DTIC Science & Technology

2016-06-01

Functionality and architecture of the NSRL Telemetry Warehouse are also described as well as the web interface, data structure, security aspects, and...Experiment Controller 6 4.5 Telemetry Sensors 7 4.6 Custom Data Processing Nodes 7 5. Web Interface 8 6. Data Structure 8 6.1 Measurements 8...telemetry in comma-separated value (CSV) format from the web interface or via custom applications developed by researchers using the client application

Effective Cyber Situation Awareness (CSA) Assessment and Training

DTIC Science & Technology

2013-11-01

activity/scenario. y. Save Wireshark Captures. z. Save SNORT logs. aa. Save MySQL databases. 4. After the completion of the scenario, the reversion...line or from custom Java code. • Cisco ASA Parser: Builds normalized vendor-neutral firewall rule specifications from Cisco ASA and PIX firewall...The Service tool lets analysts build Cauldron models from either the command line or from custom Java code. Functionally, it corresponds to the

Sustainment and Advancement of Amputee Care

DTIC Science & Technology

2015-04-08

fitted with an IDEO TM , the RTR clinical pathway takes 12 weeks to complete. 169 The IDEO TM is a “ custom carbon fiber energy storage and...advances in three-dimensional printing may allow for individualized patient and function-specific customization , as well as rapid manufacturing of...Jay attended college for a year; worked construction for 3 years; worked in a restaurant in Chicago for a year before joining the Navy in 2006

Improvement of the System of Training of Specialists by University for Coal Mining Enterprises

NASA Astrophysics Data System (ADS)

Mikhalchenko, Vadim; Seredkina, Irina

2017-11-01

In the article the ingenious technique of the Quality Function Deployment with reference to the process of training of specialists with higher education by university is considered. The method is based on the step-by-step conversion of customer requirements into specific organizational, meaningful and functional transformations of the technological process of the university. A fully deployed quality function includes four stages of tracking customer requirements while creating a product: product planning and design, process design, production design. The Quality Function Deployment can be considered as one of the methods for optimizing the technological processes of training of specialists with higher education in the current economic conditions. Implemented at the initial stages of the life cycle of the technological process, it ensures not only the high quality of the "product" of graduate school, but also the fullest possible satisfaction of consumer's requests and expectations.

Uncertainty in flood damage estimates and its potential effect on investment decisions

NASA Astrophysics Data System (ADS)

Wagenaar, Dennis; de Bruijn, Karin; Bouwer, Laurens; de Moel, Hans

2015-04-01

This paper addresses the large differences that are found between damage estimates of different flood damage models. It explains how implicit assumptions in flood damage models can lead to large uncertainties in flood damage estimates. This explanation is used to quantify this uncertainty with a Monte Carlo Analysis. This Monte Carlo analysis uses a damage function library with 272 functions from 7 different flood damage models. This results in uncertainties in the order of magnitude of a factor 2 to 5. This uncertainty is typically larger for small water depths and for smaller flood events. The implications of the uncertainty in damage estimates for flood risk management are illustrated by a case study in which the economic optimal investment strategy for a dike segment in the Netherlands is determined. The case study shows that the uncertainty in flood damage estimates can lead to significant over- or under-investments.

Uncertainty in flood damage estimates and its potential effect on investment decisions

NASA Astrophysics Data System (ADS)

Wagenaar, D. J.; de Bruijn, K. M.; Bouwer, L. M.; De Moel, H.

2015-01-01

This paper addresses the large differences that are found between damage estimates of different flood damage models. It explains how implicit assumptions in flood damage models can lead to large uncertainties in flood damage estimates. This explanation is used to quantify this uncertainty with a Monte Carlo Analysis. As input the Monte Carlo analysis uses a damage function library with 272 functions from 7 different flood damage models. This results in uncertainties in the order of magnitude of a factor 2 to 5. The resulting uncertainty is typically larger for small water depths and for smaller flood events. The implications of the uncertainty in damage estimates for flood risk management are illustrated by a case study in which the economic optimal investment strategy for a dike segment in the Netherlands is determined. The case study shows that the uncertainty in flood damage estimates can lead to significant over- or under-investments.

A Thermodynamically Consistent Damage Model for Advanced Composites

NASA Technical Reports Server (NTRS)

Maimi, Pere; Camanho, Pedro P.; Mayugo, Joan-Andreu; Davila, Carlos G.

2006-01-01

A continuum damage model for the prediction of damage onset and structural collapse of structures manufactured in fiber-reinforced plastic laminates is proposed. The principal damage mechanisms occurring in the longitudinal and transverse directions of a ply are represented by a damage tensor that is fixed in space. Crack closure under load reversal effects are taken into account using damage variables established as a function of the sign of the components of the stress tensor. Damage activation functions based on the LaRC04 failure criteria are used to predict the different damage mechanisms occurring at the ply level. The constitutive damage model is implemented in a finite element code. The objectivity of the numerical model is assured by regularizing the dissipated energy at a material point using Bazant's Crack Band Model. To verify the accuracy of the approach, analyses of coupon specimens were performed, and the numerical predictions were compared with experimental data.

Damage and recovery of skin barrier function after glycolic acid chemical peeling and crystal microdermabrasion.

PubMed

Song, Ji Youn; Kang, Hyun A; Kim, Mi-Yeon; Park, Young Min; Kim, Hyung Ok

2004-03-01

Superficial chemical peeling and microdermabrasion have become increasingly popular methods for producing facial rejuvenation. However, there are few studies reporting the skin barrier function changes after these procedures. To evaluate objectively the degree of damage visually and the time needed for the skin barrier function to recover after glycolic acid peeling and aluminum oxide crystal microdermabrasion using noninvasive bioengineering methods. Superficial chemical peeling using 30%, 50%, and 70% glycolic acid and aluminum oxide crystal microdermabrasion were used on the volar forearm of 13 healthy women. The skin response was measured by a visual observation and using an evaporimeter, corneometer, and colorimeter before and after peeling at set time intervals. Both glycolic acid peeling and aluminum oxide crystal microdermabrasion induced significant damage to the skin barrier function immediately after the procedure, and the degree of damage was less severe after the aluminum oxide crystal microdermabrasion compared with glycolic acid peeling. The damaged skin barrier function had recovered within 24 hours after both procedures. The degree of erythema induction was less severe after the aluminum oxide crystal microdermabrasion compared with the glycolic acid peeling procedure. The degree of erythema induced after the glycolic acid peeling procedure was not proportional to the peeling solution concentration used. The erythema subsided within 1 day after the aluminum oxide crystal microdermabrasion procedure and within 4 days after the glycolic acid peeling procedure. These results suggest that the skin barrier function is damaged after the glycolic acid peeling and aluminum oxide crystal microdermabrasion procedure but recovers within 1 to 4 days. Therefore, repeating the superficial peeling procedure at 2-week intervals will allow sufficient time for the damaged skin to recover its barrier function.

State dependent arrival in bulk retrial queueing system with immediate Bernoulli feedback, multiple vacations and threshold

NASA Astrophysics Data System (ADS)

Niranjan, S. P.; Chandrasekaran, V. M.; Indhira, K.

2017-11-01

The objective of this paper is to analyse state dependent arrival in bulk retrial queueing system with immediate Bernoulli feedback, multiple vacations, threshold and constant retrial policy. Primary customers are arriving into the system in bulk with different arrival rates λ a and λ b . If arriving customers find the server is busy then the entire batch will join to orbit. Customer from orbit request service one by one with constant retrial rate γ. On the other hand if an arrival of customers finds the server is idle then customers will be served in batches according to general bulk service rule. After service completion, customers may request service again with probability δ as feedback or leave from the system with probability 1 - δ. In the service completion epoch, if the orbit size is zero then the server leaves for multiple vacations. The server continues the vacation until the orbit size reaches the value ‘N’ (N > b). At the vacation completion, if the orbit size is ‘N’ then the server becomes ready to provide service for customers from the main pool or from the orbit. For the designed queueing model, probability generating function of the queue size at an arbitrary time will be obtained by using supplementary variable technique. Various performance measures will be derived with suitable numerical illustrations.

Anterior deltoid deficiency in reverse total shoulder replacement: a biomechanical study with cadavers.

PubMed

Gulotta, L V; Choi, D; Marinello, P; Wright, T; Cordasco, F A; Craig, E V; Warren, R F

2012-12-01

Reverse total shoulder replacement (RTSR) depends on adequate deltoid function for a successful outcome. However, the anterior deltoid and/or axillary nerve may be damaged due to prior procedures or injury. The purpose of this study was to determine the compensatory muscle forces required for scapular plane elevation following RTSR when the anterior deltoid is deficient. The soft tissues were removed from six cadaver shoulders, except for tendon attachments. After implantation of the RTSR, the shoulders were mounted on a custom-made shoulder simulator to determine the mean force in each muscle required to achieve 30° and 60° of scapular plane elevation. Two conditions were tested: 1) Control with an absent supraspinatus and infraspinatus; and 2) Control with anterior deltoid deficiency. Anterior deltoid deficiency resulted in a mean increase of 195% in subscapularis force at 30° when compared with the control (p = 0.02). At 60°, the subscapularis force increased a mean of 82% (p < 0.001) and the middle deltoid force increased a mean of 26% (p = 0.04). Scapular plane elevation may still be possible following an RTSR in the setting of anterior deltoid deficiency. When the anterior deltoid is deficient, there is a compensatory increase in the force required by the subscapularis and middle deltoid. Attempts to preserve the subscapularis, if present, might maximise post-operative function.

Customer relationship management implementation in the small and medium enterprise

NASA Astrophysics Data System (ADS)

Nugroho, Agus; Suharmanto, Agus; Masugino

2018-03-01

To win the global competition and sustain the business, small and medium enterprise shall implement a reliable information technology application to support their customer data base, production and sales as well as marketing management. This paper addresses the implementation of Customer Relationship Management (CRM) in small and medium enterprise, CV. Densuko Jaya. It is a small and medium enterprises in Semarang, Central Java, Republic of Indonesia deal with rubber processing industry supply chain. ADDIE model utilized in study to setup the CRM functionality at these enterprises. The aim of the authors is to present the benefits resulting from the application of CRM technologies at these enterprises to solve their chronicle issues in the field of integrated customer data base, production management process and sales automation in order to boost their business in the near future. Training and coaching have been delivered to the enterprises staffs and management to ensure that they can execute the system.

Enhancing User Customization through Novel Software Architecture for Utility Scale Solar Siting Software

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brant Peery; Sam Alessi; Randy Lee

2014-06-01

There is a need for a spatial decision support application that allows users to create customized metrics for comparing proposed locations of a new solar installation. This document discusses how PVMapper was designed to overcome the customization problem through the development of loosely coupled spatial and decision components in a JavaScript plugin architecture. This allows the user to easily add functionality and data to the system. The paper also explains how PVMapper provides the user with a dynamic and customizable decision tool that enables them to visually modify the formulas that are used in the decision algorithms that convert datamore » to comparable metrics. The technologies that make up the presentation and calculation software stack are outlined. This document also explains the architecture that allows the tool to grow through custom plugins created by the software users. Some discussion is given on the difficulties encountered while designing the system.« less

Custom-made silicone hand prosthesis: A case study.

PubMed

Nayak, S; Lenka, P K; Equebal, A; Biswas, A

2016-09-01

Up to now, a cosmetic glove was the most common method for managing transmetacarpal (TMC) and carpometacarpal (CMC) amputations, but it is devoid of markings and body color. At this amputation level, it is very difficult to fit a functional prosthesis because of the short available length, unsightly shape, grafted skin, contracture and lack of functional prosthetic options. A 30-year-old male came to our clinic with amputation at the 1st to 4th carpometacarpal level and a 5th metacarpal that was projected laterally and fused with the carpal bone. The stump had grafted skin, redness, and an unhealed suture line. He complained of pain projected over the metacarpal and suture area. The clinical team members decided to fabricate a custom-made silicone hand prosthesis to accommodate the stump, protect the grafted skin, improve the hand's appearance and provide some passive function. The custom silicone hand prosthesis was fabricated with modified flexible wires to provide passive interphalangeal movement. Basic training, care and maintenance instructions for the prosthesis were given to the patient. The silicone hand prosthesis was able to restore the appearance of the lost digits and provide some passive function. His pain (VAS score) was reduced. Improvement in activities of daily living was found in the DASH questionnaire and Jebsen-Taylor Hand Function test. A silicone glove is a good option for more distal amputations, as it can accommodate any deformity, protect the skin, enhance the appearance and provide functional assistance. This case study provides a simple method to get passively movable fingers after proximal hand amputation. Copyright © 2016. Published by Elsevier Masson SAS.

Providing a Clean Environment for Adolescents: Evaluation of the Tobacco Hazards Prevention Act in Taiwan.

PubMed

Chen, Min-Li; Chou, Li-Na; Zheng, Ya-Cheng

2017-06-13

Cigarette smoking not only damages the health of adolescents, but also contributes to air pollution. The Tobacco Hazards Prevention Act in Taiwan stipulates that cigarettes should not be sold to persons younger than 18 years. Therefore, schools should actively educate students and raise awareness of the Tobacco Hazards Prevention Act to reduce the level of damage to the health of adolescents and maintain good air quality. This study had two main goals: (1) to evaluate the stipulation that no person shall provide tobacco products to persons under the age of 18 and the effects of counseling strategies on store managers confirming customer ages before tobacco sale in southern Taiwan; and (2) to evaluate the situation of tobacco hazard prevention education conducted by school in southern Taiwan. A cross-sectional design was adopted for this study. Study I: The investigation involved an analysis of 234 retailers including convenience stores (n = 70), grocery stores (n = 83), and betel nut stalls (n = 81). The results indicated that among the 234 retailers, 171 (73.1%) of them routinely failed to confirm the buyers' ages before allowing them to purchase tobacco. The number of retailers who exhibited failure to confirm customer ages before selling tobacco products had decreased from 171 (73.1%) to 59 (25.2%) and that of those who confirmed customer ages before selling tobacco products had increased from 63 (26.9%) to 175 (74.8%) after counseling strategies had been provided, thereby revealing statistical significance (χ² = 11.26, p < 0.001). Study II: A total of 476 (89.1%) participants had received tobacco hazards prevention education and 58 (10.9%) had not. Among the various residential areas, the highest percentage of participants that did not received tobacco hazards prevention education located in the plane regions (8.4%). The government organizations should continue to adopt counseling strategies to reduce the rate of disobedience of the Tobacco Hazards Prevention Act by selling tobacco products to minors. Schools should pay close attention to tobacco hazard prevention education for junior high school students to ensure that such students are adequately educated about tobacco hazard prevention.

Providing a Clean Environment for Adolescents: Evaluation of the Tobacco Hazards Prevention Act in Taiwan

PubMed Central

Chen, Min-Li; Chou, Li-Na; Zheng, Ya-Cheng

2017-01-01

Cigarette smoking not only damages the health of adolescents, but also contributes to air pollution. The Tobacco Hazards Prevention Act in Taiwan stipulates that cigarettes should not be sold to persons younger than 18 years. Therefore, schools should actively educate students and raise awareness of the Tobacco Hazards Prevention Act to reduce the level of damage to the health of adolescents and maintain good air quality. This study had two main goals: (1) to evaluate the stipulation that no person shall provide tobacco products to persons under the age of 18 and the effects of counseling strategies on store managers confirming customer ages before tobacco sale in southern Taiwan; and (2) to evaluate the situation of tobacco hazard prevention education conducted by school in southern Taiwan. A cross-sectional design was adopted for this study. Study I: The investigation involved an analysis of 234 retailers including convenience stores (n = 70), grocery stores (n = 83), and betel nut stalls (n = 81). The results indicated that among the 234 retailers, 171 (73.1%) of them routinely failed to confirm the buyers’ ages before allowing them to purchase tobacco. The number of retailers who exhibited failure to confirm customer ages before selling tobacco products had decreased from 171 (73.1%) to 59 (25.2%) and that of those who confirmed customer ages before selling tobacco products had increased from 63 (26.9%) to 175 (74.8%) after counseling strategies had been provided, thereby revealing statistical significance (χ2 = 11.26, p < 0.001). Study II: A total of 476 (89.1%) participants had received tobacco hazards prevention education and 58 (10.9%) had not. Among the various residential areas, the highest percentage of participants that did not received tobacco hazards prevention education located in the plane regions (8.4%). The government organizations should continue to adopt counseling strategies to reduce the rate of disobedience of the Tobacco Hazards Prevention Act by selling tobacco products to minors. Schools should pay close attention to tobacco hazard prevention education for junior high school students to ensure that such students are adequately educated about tobacco hazard prevention. PMID:28608829

The Damaged Object: A "Strange Attractor" in the Dynamical System of the Mind

ERIC Educational Resources Information Center

Shulman, Graham

2010-01-01

This article discusses the impact of the damaged object on the development and functioning of psychic life with particular reference to the sense of reality. The damaged object is of pivotal significance in Klein's and Winnicott's models of psychic development and experience in early infancy. A key dimension of the development and functioning of…

Arbitrating Control of Control and Display Units

NASA Technical Reports Server (NTRS)

Sugden, Paul C.

2007-01-01

The ARINC 739 Switch is a computer program that arbitrates control of two multi-function control and display units (MCDUs) between (1) a commercial flight-management computer (FMC) and (2) NASA software used in research on transport aircraft. (MCDUs are the primary interfaces between pilots and FMCs on many commercial aircraft.) This program was recently redesigned into a software library that can be embedded in research application programs. As part of the redesign, this software was combined with software for creating custom pages of information to be displayed on a CDU. This software commands independent switching of the left (pilot s) and right (copilot s) MCDUs. For example, a custom CDU page can control the left CDU while the FMC controls the right CDU. The software uses menu keys to switch control of the CDU between the FMC or a custom CDU page. The software provides an interface that enables custom CDU pages to insert keystrokes into the FMC s CDU input interface. This feature allows the custom CDU pages to manipulate the FMC as if it were a pilot.

User interface customization on Endoscopy Department Mini-PACS and its impact on examination workflow

NASA Astrophysics Data System (ADS)

Osada, Masakazu; Kaise, Mitsuru; Ozeki, Takeshi; Tsunakawa, Hirofumi; Tsunakawa, Kiyoshi; Takayanagi, Takashi; Suzuki, Nobuaki; Miwa, Jun; Ohta, Yasuhiko; Kanai, Koichi

1999-07-01

We have proposed a new user interface with workflow customization, implemented and evaluted in Endoscopy Department Mini-PACS that has been introduced and routinely used for two years at Toshiba General Hospital. We have set some task at endoscopy image acquisition units during examinations for two different types of user interfaces and compared performance. One is a command-button based operation using a remote control, and another is that with eight graphic buttons which are displayed on a CRT monitor and can be customized. Results of the two-year study show that mean number of input diagnosis codes per examination with graphic and customized interface is significantly greater than that with conventional interface. Also, mean time to complete one upper gastric endoscopy examination with new user interface is about 17 percent less than that with conventional interface. These result suggest that systems with the visualized and customized operation and feedback encourages physicians to use more functions and to compete tasks more efficiently than systems with conventional command-button based user interfaces.

iHelp: an intelligent online helpdesk system.

PubMed

Wang, Dingding; Li, Tao; Zhu, Shenghuo; Gong, Yihong

2011-02-01

Due to the importance of high-quality customer service, many companies use intelligent helpdesk systems (e.g., case-based systems) to improve customer service quality. However, these systems face two challenges: 1) Case retrieval measures: most case-based systems use traditional keyword-matching-based ranking schemes for case retrieval and have difficulty to capture the semantic meanings of cases and 2) result representation: most case-based systems return a list of past cases ranked by their relevance to a new request, and customers have to go through the list and examine the cases one by one to identify their desired cases. To address these challenges, we develop iHelp, an intelligent online helpdesk system, to automatically find problem-solution patterns from the past customer-representative interactions. When a new customer request arrives, iHelp searches and ranks the past cases based on their semantic relevance to the request, groups the relevant cases into different clusters using a mixture language model and symmetric matrix factorization, and summarizes each case cluster to generate recommended solutions. Case and user studies have been conducted to show the full functionality and the effectiveness of iHelp.

An information based approach to improving overhead imagery collection

NASA Astrophysics Data System (ADS)

Sourwine, Matthew J.; Hintz, Kenneth J.

2011-06-01

Recent growth in commercial imaging satellite development has resulted in a complex and diverse set of systems. To simplify this environment for both customer and vendor, an information based sensor management model was built to integrate tasking and scheduling systems. By establishing a relationship between image quality and information, tasking by NIIRS can be utilized to measure the customer's required information content. Focused on a reduction in uncertainty about a target of interest, the sensor manager finds the best sensors to complete the task given the active suite of imaging sensors' functions. This is done through determination of which satellite will meet customer information and timeliness requirements with low likelihood of interference at the highest rate of return.

Profitability primer: a guide to profitability analysis in the electric power industry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Woo, C.K.; Lloyd-Zannetti, D.; Martin, J.

1996-06-01

As the electric power industry is opened to forces of competition, increased attention must be focused to develop products and services that deliver good value to customers and to identify customer segments that are profitable to serve. This primer introduces the concept of profitability analysis and its application to the electric power industry. The primer recognizes that some segments of the business will remain monopolistic and subject to regulations, while other segments will become competitive. The primer also recognizes that customer profitability is critically dependent on a host of related issues such as how internal costs are allocated to variousmore » functions and how revenues are collected and allocated.« less

GOES-R Space Weather Data: Ensuring Access and Usability

NASA Astrophysics Data System (ADS)

Tilton, M.; Rowland, W. F.; Wilkinson, D. C.; Denig, W. F.; Darnel, J.; Kress, B. T.; Loto'aniu, P. T. M.; Machol, J. L.; Redmon, R. J.; Rodriguez, J. V.

2015-12-01

The upcoming Geostationary Operational Environmental Satellite series, GOES-R, will provide critical space weather data. These data are used to prevent communication outages, mitigate the damage solar weather causes to satellites and power grids, and reduce astronaut radiation exposure. The space weather instruments aboard GOES-R will deliver an operational dataset of unprecedented breadth. However, NOAA's National Centers for Environmental Information (NCEI)—the organization that provides access to archived GOES-R data—has faced several challenges in delivering this information to customers in usable form. For instance, the GOES-R ground system was contracted to develop higher-level products for terrestrial data but not space weather data. Variations in GOES-R data file formats and archive locations have also threatened to create an inconsistent user experience. This presentation will examine the ways in which NCEI is making GOES-R space weather data more accessible and actionable for customers. These efforts include NCEI's development of high-level data products to meet the requirements of NOAA's Space Weather Prediction Center—a role NCEI has not previously played. In addition, NCEI is creating a demonstration system to show how these products can be produced in real-time. The organization is also examining customer usage of the GOES-NOP data access system and using these access patterns to drive decisions about the GOES-R user interface.

76 FR 81518 - Notice of Issuance of Final Determination Concerning Laser-Based Multi-Function Office Machines

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-28

... Determination Concerning Laser-Based Multi-Function Office Machines AGENCY: U.S. Customs and Border Protection... country of origin of laser-based multi-function office machines. Based upon the facts presented, CBP has... essential character of the laser-based multi-function office machine, and it is at their assembly and...

Solexa sequencing and custom microRNA chip reveal repertoire of microRNAs in mammary gland of bovine suffering from natural infectious mastitis.

PubMed

Ju, Zhihua; Jiang, Qiang; Liu, Gang; Wang, Xiuge; Luo, Guojing; Zhang, Yan; Zhang, Jibin; Zhong, Jifeng; Huang, Jinming

2018-02-01

Identification of microRNAs (miRNAs), target genes and regulatory networks associated with innate immune and inflammatory responses and tissue damage is essential to elucidate the molecular and genetic mechanisms for resistance to mastitis. In this study, a combination of Solexa sequencing and custom miRNA chip approaches was used to profile the expression of miRNAs in bovine mammary gland at the late stage of natural infection with Staphylococcus aureus, a widespread mastitis pathogen. We found 383 loci corresponding to 277 known and 49 putative novel miRNAs, two potential mitrons and 266 differentially expressed miRNAs in the healthy and mastitic cows' mammary glands. Several interaction networks and regulators involved in mastitis susceptibility, such as ALCAM, COL1A1, APOP4, ITIH4, CRP and fibrinogen alpha (FGA), were highlighted. Significant down-regulation and location of bta-miR-26a, which targets FGA in the mastitic mammary glands, were validated using quantitative real-time PCR, in situ hybridization and dual-luciferase reporter assays. We propose that the observed miRNA variations in mammary glands of mastitic cows are related to the maintenance of immune and defense responses, cell proliferation and apoptosis, and tissue injury and healing during the late stage of infection. Furthermore, the effect of bta-miR-26a in mastitis, mediated at least in part by enhancing FGA expression, involves host defense, inflammation and tissue damage. © 2018 Stichting International Foundation for Animal Genetics.

Mitochondria damage checkpoint in apoptosis and genome stability.

PubMed

Singh, Keshav K

2004-11-01

Mitochondria perform multiple cellular functions including energy production, cell proliferation and apoptosis. Studies described in this paper suggest a role for mitochondria in maintaining genomic stability. Genomic stability appears to be dependent on mitochondrial functions involved in maintenance of proper intracellular redox status, ATP-dependent transcription, DNA replication, DNA repair and DNA recombination. To further elucidate the role of mitochondria in genomic stability, I propose a mitochondria damage checkpoint (mitocheckpoint) that monitors and responds to damaged mitochondria. Mitocheckpoint can coordinate and maintain proper balance between apoptotic and anti-apoptotic signals. When mitochondria are damaged, mitocheckpoint can be activated to help cells repair damaged mitochondria, to restore normal mitochondrial function and avoid production of mitochondria-defective cells. If mitochondria are severely damaged, mitocheckpoint may not be able to repair the damage and protect cells. Such an event triggers apoptosis. If damage to mitochondria is continuous or persistent such as damage to mitochondrial DNA resulting in mutations, mitocheckpoint may fail which can lead to genomic instability and increased cell survival in yeast. In human it can cause cancer. In support of this proposal we provide evidence that mitochondrial genetic defects in both yeast and mammalian systems lead to impaired DNA repair, increased genomic instability and increased cell survival. This study reveals molecular genetic mechanisms underlying a role for mitochondria in carcinogenesis in humans.

Brachytherapy Application With In Situ Dose Painting Administered by Gold Nanoparticle Eluters

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sinha, Neeharika; Cifter, Gizem; Department of Radiation Oncology, Dana-Farber Cancer Institute, Brigham and Women's Hospital and Harvard Medical School, Boston, Massachusetts

Purpose: Recent studies show promise that administering gold nanoparticles (GNP) to tumor cells during brachytherapy could significantly enhance radiation damage to the tumor. A new strategy proposed for sustained administration of the GNP in prostate tumors is to load them into routinely used brachytherapy spacers for customizable in situ release after implantation. This in silico study investigated the intratumor biodistribution and corresponding dose enhancement over time due to GNP released from such GNP-loaded brachytherapy spacers (GBS). Method and Materials: An experimentally determined intratumoral diffusion coefficient (D) for 10-nm nanoparticles was used to estimate D for other sizes by using themore » Stokes-Einstein equation. GNP concentration profiles, obtained using D, were then used to calculate the corresponding dose enhancement factor (DEF) for each tumor voxel, using dose painting-by-numbers approach, for times relevant to the considered brachytherapy sources' lifetimes. The investigation was carried out as a function of GNP size for the clinically applicable low-dose-rate brachytherapy sources iodine-125 (I-125), palladium-103 (Pd-103), and cesium-131 (Cs-131). Results: Results showed that dose enhancement to tumor voxels and subvolumes during brachytherapy can be customized by varying the size of GNP released or eluted from the GBS. For example, using a concentration of 7 mg/g GNP, significant DEF (>20%) could be achieved 5 mm from a GBS after 5, 12, 25, 46, 72, 120, and 195 days, respectively, for GNP sizes of 2, 5, 10, 20, 30, and 50 nm and for 80 nm when treating with I-125. Conclusions: Analyses showed that using Cs-131 provides the highest dose enhancement to tumor voxels. However, given its relatively longer half-life, I-125 presents the most flexibility for customizing the dose enhancement as a function of GNP size. These findings provide a useful reference for further work toward development of potential new brachytherapy application with in situ dose painting administered via gold nanoparticle eluters for prostate cancer.« less

Uncertainty in urban flood damage assessment due to urban drainage modelling and depth-damage curve estimation.

PubMed

Freni, G; La Loggia, G; Notaro, V

2010-01-01

Due to the increased occurrence of flooding events in urban areas, many procedures for flood damage quantification have been defined in recent decades. The lack of large databases in most cases is overcome by combining the output of urban drainage models and damage curves linking flooding to expected damage. The application of advanced hydraulic models as diagnostic, design and decision-making support tools has become a standard practice in hydraulic research and application. Flooding damage functions are usually evaluated by a priori estimation of potential damage (based on the value of exposed goods) or by interpolating real damage data (recorded during historical flooding events). Hydraulic models have undergone continuous advancements, pushed forward by increasing computer capacity. The details of the flooding propagation process on the surface and the details of the interconnections between underground and surface drainage systems have been studied extensively in recent years, resulting in progressively more reliable models. The same level of was advancement has not been reached with regard to damage curves, for which improvements are highly connected to data availability; this remains the main bottleneck in the expected flooding damage estimation. Such functions are usually affected by significant uncertainty intrinsically related to the collected data and to the simplified structure of the adopted functional relationships. The present paper aimed to evaluate this uncertainty by comparing the intrinsic uncertainty connected to the construction of the damage-depth function to the hydraulic model uncertainty. In this way, the paper sought to evaluate the role of hydraulic model detail level in the wider context of flood damage estimation. This paper demonstrated that the use of detailed hydraulic models might not be justified because of the higher computational cost and the significant uncertainty in damage estimation curves. This uncertainty occurs mainly because a large part of the total uncertainty is dependent on depth-damage curves. Improving the estimation of these curves may provide better results in term of uncertainty reduction than the adoption of detailed hydraulic models.

CRISPR library designer (CLD): software for multispecies design of single guide RNA libraries.

PubMed

Heigwer, Florian; Zhan, Tianzuo; Breinig, Marco; Winter, Jan; Brügemann, Dirk; Leible, Svenja; Boutros, Michael

2016-03-24

Genetic screens using CRISPR/Cas9 are a powerful method for the functional analysis of genomes. Here we describe CRISPR library designer (CLD), an integrated bioinformatics application for the design of custom single guide RNA (sgRNA) libraries for all organisms with annotated genomes. CLD is suitable for the design of libraries using modified CRISPR enzymes and targeting non-coding regions. To demonstrate its utility, we perform a pooled screen for modulators of the TNF-related apoptosis inducing ligand (TRAIL) pathway using a custom library of 12,471 sgRNAs. CLD predicts a high fraction of functional sgRNAs and is publicly available at https://github.com/boutroslab/cld.

Damaging effects of visible light. Comprehensive progress report

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

1981-01-01

Research progress is reported on studies of retinal light damage. A myriad of variables effect the production of light damage. These include age, prior light history, body temperature, vitamin A status, intensity, wavelength and duration of light. The intensity-duration function and the age function have been studied in detail in rats. Studies have been begun on the wavelength variable. (ACR)

Dealing with dissatisfaction in mathematical modelling to integrate QFD and Kano’s model

NASA Astrophysics Data System (ADS)

Retno Sari Dewi, Dian; Debora, Joana; Edy Sianto, Martinus

2017-12-01

The purpose of the study is to implement the integration of Quality Function Deployment (QFD) and Kano’s Model into mathematical model. Voice of customer data in QFD was collected using questionnaire and the questionnaire was developed based on Kano’s model. Then the operational research methodology was applied to build the objective function and constraints in the mathematical model. The relationship between voice of customer and engineering characteristics was modelled using linier regression model. Output of the mathematical model would be detail of engineering characteristics. The objective function of this model is to maximize satisfaction and minimize dissatisfaction as well. Result of this model is 62% .The major contribution of this research is to implement the existing mathematical model to integrate QFD and Kano’s Model in the case study of shoe cabinet.

Issues and Methods for Assessing COTS Reliability, Maintainability, and Availability

NASA Technical Reports Server (NTRS)

Schneidewind, Norman F.; Nikora, Allen P.

1998-01-01

Many vendors produce products that are not domain specific (e.g., network server) and have limited functionality (e.g., mobile phone). In contrast, many customers of COTS develop systems that am domain specific (e.g., target tracking system) and have great variability in functionality (e.g., corporate information system). This discussion takes the viewpoint of how the customer can ensure the quality of COTS components. In evaluating the benefits and costs of using COTS, we must consider the environment in which COTS will operate. Thus we must distinguish between using a non-mission critical application like a spreadsheet program to produce a budget and a mission critical application like military strategic and tactical operations. Whereas customers will tolerate an occasional bug in the former, zero tolerance is the rule in the latter. We emphasize the latter because this is the arena where there are major unresolved problems in the application of COTS. Furthermore, COTS components may be embedded in the larger customer system. We refer to these as embedded systems. These components must be reliable, maintainable, and available, and must be with the larger system in order for the customer to benefit from the advertised advantages of lower development and maintenance costs. Interestingly, when the claims of COTS advantages are closely examined, one finds that to a great extent these COTS components consist of hardware and office products, not mission critical software [1]. Obviously, COTS components are different from custom components with respect to one or more of the following attributes: source, development paradigm, safety, reliability, maintainability, availability, security, and other attributes. However, the important question is whether they should be treated differently when deciding to deploy them for operational use; we suggest the answer is no. We use reliability as an example to justify our answer. In order to demonstrate its reliability, a COTS component must pass the same reliability evaluations as the custom components, otherwise the COTS components will be the weakest link in the chain of components and will be the determinant of software system reliability. The challenge is that there will be less information available for evaluating COTS components than for custom components but this does not mean we should despair and do nothing. Actually, there is a lot we can do even in the absence of documentation on COTS components because the customer will have information about how COTS components are to be used in the larger system. To illustrate our approach, we will consider the reliability, maintainability, and availability (RMA) of COTS components as used in larger systems. Finally, COTS suppliers might consider increasing visibility into their products to assist customers in determining the components' fitness for use in a particular application. We offer ideas of information that would be useful to customers, and what vendors might do to provide it.

An indoor air filtration study in homes of elderly: cardiovascular and respiratory effects of exposure to particulate matter

PubMed Central

2013-01-01

Background Exposure to particulate air pollution increases respiratory and cardiovascular morbidity and mortality, especially in elderly, possibly through inflammation and vascular dysfunction. Methods We examined potential beneficial effects of indoor air filtration in the homes of elderly, including people taking vasoactive drugs. Forty-eight nonsmoking subjects (51 to 81 years) in 27 homes were included in this randomized, double-blind, crossover intervention study with consecutive two-week periods with or without the inclusion of a high-efficiency particle air filter in re-circulating custom built units in their living room and bedroom. We measured blood pressure, microvascular and lung function and collected blood samples for hematological, inflammation, monocyte surface and lung cell damage markers before and at day 2, 7 and 14 during each exposure scenario. Results The particle filters reduced the median concentration of PM2.5 from approximately 8 to 4 μg/m3 and the particle number concentration from 7669 to 5352 particles/cm3. No statistically significant effects of filtration as category were observed on microvascular and lung function or the biomarkers of systemic inflammation among all subjects, or in the subgroups taking (n = 11) or not taking vasoactive drugs (n = 37). However, the filtration efficacy was variable and microvascular function was within 2 days significantly increased with the actual PM2.5 decrease in the bedroom, especially among 25 subjects not taking any drugs. Conclusion Substantial exposure contrasts in the bedroom and no confounding by drugs appear required for improved microvascular function by air filtration, whereas no other beneficial effect was found in this elderly population. PMID:24373585

Flood damage estimation of companies: A comparison of Stage-Damage-Functions and Random Forests

NASA Astrophysics Data System (ADS)

Sieg, Tobias; Kreibich, Heidi; Vogel, Kristin; Merz, Bruno

2017-04-01

The development of appropriate flood damage models plays an important role not only for the damage assessment after an event but also to develop adaptation and risk mitigation strategies. So called Stage-Damage-Functions (SDFs) are often applied as a standard approach to estimate flood damage. These functions assign a certain damage to the water depth depending on the use or other characteristics of the exposed objects. Recent studies apply machine learning algorithms like Random Forests (RFs) to model flood damage. These algorithms usually consider more influencing variables and promise to depict a more detailed insight into the damage processes. In addition they provide an inherent validation scheme. Our study focuses on direct, tangible damage of single companies. The objective is to model and validate the flood damage suffered by single companies with SDFs and RFs. The data sets used are taken from two surveys conducted after the floods in the Elbe and Danube catchments in the years 2002 and 2013 in Germany. Damage to buildings (n = 430), equipment (n = 651) as well as goods and stock (n = 530) are taken into account. The model outputs are validated via a comparison with the actual flood damage acquired by the surveys and subsequently compared with each other. This study investigates the gain in model performance with the use of additional data and the advantages and disadvantages of the RFs compared to SDFs. RFs show an increase in model performance with an increasing amount of data records over a comparatively large range, while the model performance of the SDFs is already saturated for a small set of records. In addition, the RFs are able to identify damage influencing variables, which improves the understanding of damage processes. Hence, RFs can slightly improve flood damage predictions and provide additional insight into the underlying mechanisms compared to SDFs.

Some dissociating factors in the analysis of structural and functional progressive damage in open-angle glaucoma.

PubMed

Hudson, C J W; Kim, L S; Hancock, S A; Cunliffe, I A; Wild, J M

2007-05-01

To identify the presence, and origin, of any "dissociating factors" inherent to the techniques for evaluating progression that mask the relationship between structural and functional progression in open-angle glaucoma (OAG). 23 patients (14 with OAG and 9 with ocular hypertension (OHT)) who had received serial Heidelberg Retina Tomograph (HRT II) and Humphrey Field Analyser (HFA) examinations for >or=5 years (mean 78.4 months (SD 9.5), range 60-101 months) were identified. Evidence of progressive disease was retrospectively evaluated in one eye of each patient using the Topographic Change Analysis (TCA) and Glaucoma Progression Analysis (GPA) for the HRT II and HFA, respectively. Six patients were stable by both techniques; four exhibited both structural and functional progression; seven exhibited structural progression, only, and six showed functional progression, only. Three types of dissociating factors were identified. TCA failed to identify progressive structural damage in the presence of advanced optic nerve head damage. GPA failed to identify progressive functional damage at stimulus locations, with sensitivities exhibiting test-retest variability beyond the maximum stimulus luminance of the perimeter, and where a perimetric learning effect was apparent. The three dissociating factors accounted for nine of the 13 patients who exhibited a lack of concordance between structural and functional progressive damage.

Test verification and design of the bicycle frame parameters

NASA Astrophysics Data System (ADS)

Zhang, Long; Xiang, Zhongxia; Luo, Huan; Tian, Guan

2015-07-01

Research on design of bicycles is concentrated on mechanism and auto appearance design, however few on matches between the bike and the rider. Since unreasonable human-bike relationship leads to both riders' worn-out joints and muscle injuries, the design of bicycles should focus on the matching. In order to find the best position of human-bike system, simulation experiments on riding comfort under different riding postures are done with the lifemode software employed to facilitate the cycling process as well as to obtain the best position and the size function of it. With BP neural network and GA, analyzing simulation data, conducting regression analysis of parameters on different heights and bike frames, the equation of best position of human-bike system is gained at last. In addition, after selecting testers, customized bikes based on testers' height dimensions are produced according to the size function. By analyzing and comparing the experimental data that are collected from testers when riding common bicycles and customized bicycles, it is concluded that customized bicycles are four times even six times as comfortable as common ones. The equation of best position of human-bike system is applied to improve bikes' function, and the new direction on future design of bicycle frame parameters is presented.

Determining the need for improvement of infant incubator design with quality function deployment

NASA Astrophysics Data System (ADS)

Tarigan, U.; Ginting, R.; Siregar, I.

2018-02-01

A Newborns need particular attention because it takes time to adapt to the outside world. In accordance with the standard post-neonatal procedures, newborns should be incorporated into the incubator within a specified period of time according to the infant’s health level. Infant incubator as a medical device used to care for newborns, often get complaints from doctors and child nurses. The complaint indicates consumer dissatisfaction with incubator products in the hospital. Broadly speaking, objection against infant incubators lie in inappropriate designs. To overcome these complaints the researchers apply the method of Quality Function Deployment to determine the characteristics of priority techniques in accordance with the wishes of consumers with it. The primary focus of QFD is to engage customers in the product development process as early as possible, which their needs and desires serve as the starting point of the QFD process. Therefore, QFD is called the voice of customer. The underlying philosophy is that customers are not always satisfied with a product even though the product has been perfectly produced. The results show that the category used as a priority improvement is the additional function of the oxygen cylinder and the size of the door hole. QFD phase one produces technical characteristics of Ergonomy, Features and Cost as critical part determinants.

Orthotics Compared to Conventional Therapy and Other Non-Surgical Treatments for Plantar Fasciitis

PubMed Central

Lewis, Rebecca D.; Wright, Paul; McCarthy, Laine H.

2016-01-01

Clinical Question In adults with acute plantar fasciitis whose symptoms have not been relieved with the conventional regimen of NSAIDS, stretching and lifestyle modification, do the addition of orthotics (prefabricated or custom fitted) reduce pain and improve function compared with other non-surgical treatments (manipulative chiropractic, physical therapy and/or heel steroid injections)? Answer Yes. Studies have shown that orthotics, both prefabricated and custom fitted, reduce pain and improve function in adults with acute plantar fasciitis with few risks or side effects. Used alone or in addition to conventional therapy (NSAIDs, stretching, lifestyle modification), orthotics are effective and well tolerated by patients for short-term pain relief and improved function. Prefabricated orthotics are less costly and provide similar relief to more expensive custom orthotics. Level of Evidence of the Answer A Search Terms Plantar fasciitis, heel pain, treatment, orthotics, Limits Adult, human, English, Review, Randomized-Control Trials, Systematic Reviews, adults age 18 or more, publication dates 2004 to present. Date Search was Conducted January 16, 2014; updated January 20, 2015 Inclusion Criteria Recent published systematic reviews, randomized controlled, meta-analyses; adults with confirmed acute or recent diagnosis of plantar fasciitis. Exclusion Criteria Studies older than 10 years, children, adolescents less than 18 years of age, chronic or recalcitrant plantar fasciitis. PMID:26855444

Orthotics Compared to Conventional Therapy and Other Non-Surgical Treatments for Plantar Fasciitis.

PubMed

Lewis, Rebecca D; Wright, Paul; McCarthy, Laine H

2015-12-01

In adults with acute plantar fasciitis whose symptoms have not been relieved with the conventional regimen of NSAIDS, stretching and lifestyle modification, do the addition of orthotics (prefabricated or custom fitted) reduce pain and improve function compared with other non-surgical treatments (manipulative chiropractic, physical therapy and/or heel steroid injections)? Yes. Studies have shown that orthotics, both prefabricated and custom fitted, reduce pain and improve function in adults with acute plantar fasciitis with few risks or side effects. Used alone or in addition to conventional therapy (NSAIDs, stretching, lifestyle modification), orthotics are effective and well tolerated by patients for short-term pain relief and improved function. Prefabricated orthotics are less costly and provide similar relief to more expensive custom orthotics. Level of Evidence of the Answer: A Search Terms: Plantar fasciitis, heel pain, treatment, orthotics, Limits: Adult, human, English, Review, Randomized-Control Trials, Systematic Reviews, adults age 18 or more, publication dates 2004 to present. Date Search was Conducted: January 16, 2014; updated January 20, 2015 INCLUSION CRITERIA: Recent published systematic reviews, randomized controlled, meta-analyses; adults with confirmed acute or recent diagnosis of plantar fasciitis. Studies older than 10 years, children, adolescents less than 18 years of age, chronic or recalcitrant plantar fasciitis.

41 CFR 102-76.85 - What is a primary function area for purposes of providing an accessible route in leased...

Code of Federal Regulations, 2011 CFR

2011-01-01

... AND CONSTRUCTION Architectural Barriers Act § 102-76.85 What is a primary function area for purposes...), a primary function area is an area that contains a major activity for which the leased facility is intended. Primary function areas include areas where services are provided to customers or the public, and...

41 CFR 102-76.85 - What is a primary function area for purposes of providing an accessible route in leased...

Code of Federal Regulations, 2012 CFR

2012-01-01

... AND CONSTRUCTION Architectural Barriers Act § 102-76.85 What is a primary function area for purposes...), a primary function area is an area that contains a major activity for which the leased facility is intended. Primary function areas include areas where services are provided to customers or the public, and...

41 CFR 102-76.85 - What is a primary function area for purposes of providing an accessible route in leased...

Code of Federal Regulations, 2013 CFR

2013-07-01

... AND CONSTRUCTION Architectural Barriers Act § 102-76.85 What is a primary function area for purposes...), a primary function area is an area that contains a major activity for which the leased facility is intended. Primary function areas include areas where services are provided to customers or the public, and...

41 CFR 102-76.85 - What is a primary function area for purposes of providing an accessible route in leased...

Code of Federal Regulations, 2014 CFR

2014-01-01

... AND CONSTRUCTION Architectural Barriers Act § 102-76.85 What is a primary function area for purposes...), a primary function area is an area that contains a major activity for which the leased facility is intended. Primary function areas include areas where services are provided to customers or the public, and...

41 CFR 102-76.85 - What is a primary function area for purposes of providing an accessible route in leased...

Code of Federal Regulations, 2010 CFR

2010-07-01

... AND CONSTRUCTION Architectural Barriers Act § 102-76.85 What is a primary function area for purposes...), a primary function area is an area that contains a major activity for which the leased facility is intended. Primary function areas include areas where services are provided to customers or the public, and...

Tailored logistics: the next advantage.

PubMed

Fuller, J B; O'Conor, J; Rawlinson, R

1993-01-01

How many top executives have ever visited with managers who move materials from the factory to the store? How many still reduce the costs of logistics to the rent of warehouses and the fees charged by common carriers? To judge by hours of senior management attention, logistics problems do not rank high. But logistics have the potential to become the next governing element of strategy. Whether they know it or not, senior managers of every retail store and diversified manufacturing company compete in logistically distinct businesses. Customer needs vary, and companies can tailor their logistics systems to serve their customers better and more profitably. Companies do not create value for customers and sustainable advantage for themselves merely by offering varieties of goods. Rather, they offer goods in distinct ways. A particular can of Coca-Cola, for example, might be a can of Coca-Cola going to a vending machine, or a can of Coca-Cola that comes with billing services. There is a fortune buried in this distinction. The goal of logistics strategy is building distinct approaches to distinct groups of customers. The first step is organizing a cross-functional team to proceed through the following steps: segmenting customers according to purchase criteria, establishing different standards of service for different customer segments, tailoring logistics pipelines to support each segment, and creating economics of scale to determine which assets can be shared among various pipelines. The goal of establishing logistically distinct businesses is familiar: improved knowledge of customers and improved means of satisfying them.

Optimal Electric Vehicle Scheduling: A Co-Optimized System and Customer Perspective

NASA Astrophysics Data System (ADS)

Maigha

Electric vehicles provide a two pronged solution to the problems faced by the electricity and transportation sectors. They provide a green, highly efficient alternative to the internal combustion engine vehicles, thus reducing our dependence on fossil fuels. Secondly, they bear the potential of supporting the grid as energy storage devices while incentivising the customers through their participation in energy markets. Despite these advantages, widespread adoption of electric vehicles faces socio-technical and economic bottleneck. This dissertation seeks to provide solutions that balance system and customer objectives under present technological capabilities. The research uses electric vehicles as controllable loads and resources. The idea is to provide the customers with required tools to make an informed decision while considering the system conditions. First, a genetic algorithm based optimal charging strategy to reduce the impact of aggregated electric vehicle load has been presented. A Monte Carlo based solution strategy studies change in the solution under different objective functions. This day-ahead scheduling is then extended to real-time coordination using a moving-horizon approach. Further, battery degradation costs have been explored with vehicle-to-grid implementations, thus accounting for customer net-revenue and vehicle utility for grid support. A Pareto front, thus obtained, provides the nexus between customer and system desired operating points. Finally, we propose a transactive business model for a smart airport parking facility. This model identifies various revenue streams and satisfaction indices that benefit the parking lot owner and the customer, thus adding value to the electric vehicle.

Custom vs conventional PRK: a prospective, randomized, contralateral eye comparison of postoperative visual function.

PubMed

Mifflin, Mark D; Hatch, Bryndon B; Sikder, Shameema; Bell, James; Kurz, Christopher J; Moshirfar, Majid

2012-02-01

To determine whether VISX S4 (VISX Inc) custom photorefractive keratectomy (PRK) results in better visual outcomes than VISX S4 conventional PRK. Photorefractive keratectomy was performed on 80 eyes from 40 patients in this randomized, prospective, contralateral eye study. Dominant eyes were randomized to one group with the fellow eye receiving the alternate treatment. Primary outcome measures included uncorrected distance visual acuity (UDVA), corrected distance visual acuity (CDVA), contrast sensitivity, and root-mean-square (RMS) higher order aberrations. Mean UDVA was -0.023±0.099 (20/19) in the custom group and -0.044±0.080 (20/18) in the conventional group 6 months after surgery (P=.293). Mean CDVA was -0.073±0.067 (20/17) in the custom group and -0.079±0.071 (20/17) in the conventional group 6 months after surgery (P=.659). Total higher order aberration RMS and spherical aberration increased in both groups compared to preoperative values (P<.05). Coma increased in the conventional group (P<.05) whereas it was similar to preoperative values in the custom group. No significant differences were noted in induction of trefoil. Custom and conventional PRK were shown to be safe and effective with excellent visual acuity and contrast sensitivity performance at 6 and 12 months. Conventional PRK induced more coma than custom PRK; however, this did not seem to correlate with clinical outcomes. Copyright 2012, SLACK Incorporated.

[A comparative study of the renal damage produced after the extracorporeal shock wave lithotripsy according to the lithiasis location].

PubMed

Cancho Gil, Ma J; Díz Rodríguez, R; Vírseda Chamorro, M; Alpuente Román, C; Cabrera Cabrera, J A; Paños Lozano, P

2005-04-01

The Extracorporeal shock waves lithotripsy (ESWL) is fundamental in the treatment of lithiasis. However, there are evidences that it can produce renal damage. The objective of our study is to determine the degree of affectation of the glomerular and tubular function after ESWL, and the influence of the lithiasis location on the type of renal damage. A prospective longitudinal study was carried out in 14 patients with normal renal function subjected to ESWL. We determined the basal level, and the levels at the 24 hours, at the 4th and the 10th day post ESWL of: microalbuminuria (MA) (that values the glomerular function), and N-acetyl glucosamide (NAG) and alanine aminopeptidase (AAP), (that value the tubular function). The basal levels of of MA, NAG and AAP didn't show significant differences in connection with the localization of the stones. A significant increase was observed of the three parameters only 24 hours post ESWL. No significant differences were observed between the variation of the microalbuminuria levels, AAP and NAG and the treatment in relation to the localization of the stones. It exists a glomerular and tubular damage after ESWL. This damage is not related with the pelvic or calicial location of the stones. In patient with previous normal renal function, the renal damage recovers at the 4th day post ESWL.

Functional and Physical Outcomes following Use of a Flexible CO2 Laser Fiber and Bipolar Electrocautery in Close Proximity to the Rat Sciatic Nerve with Correlation to an In Vitro Thermal Profile Model

PubMed Central

Robinson, A. M.; Fishman, A. J.; Bendok, B. R.; Richter, C.-P.

2015-01-01

This study compared functional and physical collateral damage to a nerve when operating a Codman MALIS Bipolar Electrosurgical System CMC-III or a CO2 laser coupled to a laser, with correlation to an in vitro model of heating profiles created by the devices in thermochromic ink agarose. Functional damage of the rat sciatic nerve after operating the MALIS or CO2 laser at various power settings and proximities to the nerve was measured by electrically evoked nerve action potentials, and histology of the nerve was used to assess physical damage. Thermochromic ink dissolved in agarose was used to model the spatial and temporal profile of the collateral heating zone of the electrosurgical system and the laser ablation cone. We found that this laser can be operated at 2 W directly above the nerve with minimal damage, while power settings of 5 W and 10 W resulted in acute functional and physical nerve damage, correlating with the maximal heating cone in the thermochromic ink model. MALIS settings up to 40 (11 W) did not result in major functional or physical nerve damage until the nerve was between the forceps tips, correlating with the hottest zone, localized discretely between the tips. PMID:25699266

Customer Service Analysis of Tactical Air Command Base Level Supply Support

DTIC Science & Technology

1990-09-01

function. A large number of respondents described customer service as an activity such as order processing , handling of complaints, or troubleshooting...thru 14 General Service .69 19 thru 28 Demeanor of Supply .86 Representatives 29 thru 36 Order Processing .82 37 thru 40 Order Cycle Time .84 41 thru...Representatives 23 thru 30 Order Processing .83 31 thru 34 Order Cycle Time .75 35 thru 39 Item Availability .80 40 thru 45 Responsiveness .86 Univariate

Damage detection and isolation via autocorrelation: a step toward passive sensing

NASA Astrophysics Data System (ADS)

Chang, Y. S.; Yuan, F. G.

2018-03-01

Passive sensing technique may eliminate the need of expending power from actuators and thus provide a means of developing a compact and simple structural health monitoring system. More importantly, it may provide a solution for monitoring the aircraft subjected to environmental loading from air flow during operation. In this paper, a non-contact auto-correlation based technique is exploited as a feasibility study for passive sensing application to detect damage and isolate the damage location. Its theoretical basis bears some resemblance to reconstructing Green's function from diffusive wavefield through cross-correlation. Localized high pressure air from air compressor are randomly and continuously applied on the one side surface of the aluminum panels through the air blow gun. A laser Doppler vibrometer (LDV) was used to scan a 90 mm × 90 mm area to create a 6 × 6 2D-array signals from the opposite side of the panels. The scanned signals were auto-correlated to reconstruct a "selfimpulse response" (or Green's function). The premise for stably reconstructing the accurate Green's function requires long sensing times. For a 609.6 mm × 609.6 mm flat aluminum panel, the sensing times roughly at least four seconds is sufficient to establish converged Green's function through correlation. For the integral stiffened aluminum panel, the geometrical features of the panel expedite the formation of the diffusive wavefield and thus shorten the sensing times. The damage is simulated by gluing a magnet onto the panels. Reconstructed Green's functions (RGFs) are used for damage detection and damage isolation based on an imaging condition with mean square deviation of the RGFs from the pristine and the damaged structure and the results are shown in color maps. The auto-correlation based technique is shown to consistently detect the simulated damage, image and isolate the damage in the structure subjected to high pressure air excitation. This technique may be transformed into passive sensing applied on the aircraft during operation.

Neurosurgical patties: adhesion and damage mitigation.

PubMed

Stratton-Powell, Ashley A; Anderson, Ian A; Timothy, Jake; Kapur, Nikil; Culmer, Peter

2015-07-01

Neurosurgical patties are textile pads used during most neurosurgical operations to protect tissues, manage the fluid environment, control hemostasis, and aid tissue manipulation. Recent research has suggested that, contrary to their aim, patties adhere to brain tissue and cause damage during removal. This study aimed to characterize and quantify the degree of and consequences resulting from adhesion between neurosurgical patties and brain tissue. Using a customized peel apparatus, the authors performed 90° peel tests on 5 patty products: Policot, Telfa, Americot, Delicot, and Ray-Cot (n = 247) from American Surgical Company. They tested 4 conditions: wet patty on glass (control), wet patty on wet brain peeled at 5 mm/sec (wet), dry patty on wet brain peeled at 5 mm/sec (dry), and wet patty on wet brain peeled at 20 mm/sec (speed). The interaction between patty and tissue was analyzed using peel-force traces and pre-peel histological analysis. Adhesion strength differed between patty products (p < 0.001) and conditions (p < 0.001). Adhesion strength was greatest for Delicot patties under wet (2.22 mN/mm) and dry (9.88 mN/mm) conditions. For all patties, damage at the patty-tissue interface was proportional to the degree of fiber contact. When patties were irrigated, mechanical adhesion was reduced by up to 550% compared with dry usage. For all patty products, mechanical (destructive) and liquid-mediated (nondestructive) adhesion caused damage to neural tissue. The greatest adhesion occurred with Delicot patties. To mitigate patty adhesion and neural tissue damage, surgeons should consider regular irrigation to be essential during neurosurgical procedures.

Expressing the sense of Congress that financial institutions should work proactively with their customers affected by the shutdown of the Federal Government who may be facing short-term financial hardship and long-term damage to their creditworthiness through no fault of their own.

THOMAS, 113th Congress

Rep. Waters, Maxine [D-CA-43

2013-10-11

House - 10/11/2013 Referred to the Committee on Financial Services, and in addition to the Committee on Oversight and Government Reform, for a period to be subsequently determined by the Speaker, in each case for consideration of such provisions as fall within the jurisdiction of the... (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Development of a Supporting System of the Business Continuity Plan (BCP) for Construction Companies

NASA Astrophysics Data System (ADS)

Mano, Kouhei; Shiraki, Wataru; Inomo, Hitoshi; Kuyama, Hironori; Isouchi, Chikako

Recently, the natural disaster and the accident have happened frequently. Thus, many companies and local organizations had been suffered such as discontinuity of business, loss of profits, customers' confidence decrease, and tremendous damage out of business. Especially the business stop of construction companies are influenced the recovery activities, so that it could be late the rescue activities. In this study, a supporting system of the business continuity plan (BCP) for construction companies is developed using the web server and database, and then some ideas for the user's friendly system are considered.

Correlation of Particle-Induced Displacement Damage in Silicon

NASA Astrophysics Data System (ADS)

Summers, G. P.; Burke, E. A.; Dale, C. J.; Wolicki, E. A.; Marshall, P. W.; Gehlhausen, M. A.

1987-12-01

Correlation is made between the effects of displacement damage caused in several types of silicon bipolar transistors by protons, deuterons, helium ions, and by 1 MeV equivalent neutrons. These measurements are compared to calculations of the nonionizing energy deposition in silicon as a function of particle type and energy. Measurements were made of displacement damage factors for 2N2222A and 2N2907A switching transistors, and for 2N3055, 2N6678, and 2N6547 power transistors, as a function of collector current using 3.7 - 175 MeV protons, 4.3 - 37 MeV deuterons, and 16.8 - 65 MeV helium ions. Long term ionization effects on the value of the displacement damage factors were taken into account. In calculating the energy dependence of the nonionizing energy deposition, Rutherford, nuclear elastic, and nuclear inelastic interactions, and Lindhard energy partition were considered. The main conclusions of the work are as follows: 1) The ratio of the displacement damage factors for a given charged particle to the 1 MeV equivalent neutron damage factor, as a function of energy, falls on a common curve which is independent of collector current. 2) Deuterons of a given energy are about twice as damaging as protons and helium ions are about eighteen times as damaging as protons.

Shuttle operations era planning for flight operations

NASA Technical Reports Server (NTRS)

Holt, J. D.; Beckman, D. A.

1984-01-01

The Space Transportation System (STS) provides routine access to space for a wide range of customers in which cargos vary from single payloads on dedicated flights to multiple payloads that share Shuttle resources. This paper describes the flight operations planning process from payload introduction through flight assignment to execution of the payload objectives and the changes that have been introduced to improve that process. Particular attention is given to the factors that influence the amount of preflight preparation necessary to satisfy customer requirements. The partnership between the STS operations team and the customer is described in terms of their functions and responsibilities in the development of a flight plan. A description of the Mission Control Center (MCC) and payload support capabilities completes the overview of Shuttle flight operations.

Synthesis and Analysis of Custom Bi-directional Reflectivity Distribution Functions in DIRSIG

NASA Astrophysics Data System (ADS)

Dank, J.; Allen, D.

2016-09-01

The bi-directional reflectivity distribution (BRDF) function is a fundamental optical property of materials, characterizing important properties of light scattered by a surface. For accurate radiance calculations using synthetic targets and numerical simulations such as the Digital Imaging and Remote Sensing Image Generation (DIRSIG) model, fidelity of the target BRDFs is critical. While fits to measured BRDF data can be used in DIRSIG, obtaining high-quality data over a large spectral continuum can be time-consuming and expensive, requiring significant investment in illumination sources, sensors, and other specialized hardware. As a consequence, numerous parametric BRDF models are available to approximate actual behavior; but these all have shortcomings. Further, DIRSIG doesn't allow direct visualization of BRDFs, making it difficult for the user to understand the numerical impact of various models. Here, we discuss the innovative use of "mixture maps" to synthesize custom BRDFs as linear combinations of parametric models and measured data. We also show how DIRSIG's interactive mode can be used to visualize and analyze both available parametric models currently used in DIRSIG and custom BRDFs developed using our methods.

An analysis of the field service function of selected electronics firms

NASA Astrophysics Data System (ADS)

Hull, Dennis Lee

For the purposes of this study, field service was defined as the function concerned with the servicing and maintaining, by the manufacturer or supplier, of products (usually owned by customers) used away from the manufacturer's or supplier's site. Field service is an important component of the service sector and of customer service. Field service availability and quality of this service are increasingly being used by customers as a means of product selection. Many companies have recognized this trend and have identified field service as a competitive edge. A review of the field service literature and discussions with field service consultants and professionals indicated a lack of field service research--more specifically, a systems analysis of the area was lacking. The purpose of this research was to examine, utilizing a systems perspective, the field service practices of leading electronics firms in order to develop field service management propositions (empirical generalizations) and a prescriptive model of best practice. The electronics industry was selected due to the critical relation of service-based competition to company profitability.

Applying stochastic small-scale damage functions to German winter storms

NASA Astrophysics Data System (ADS)

Prahl, B. F.; Rybski, D.; Kropp, J. P.; Burghoff, O.; Held, H.

2012-03-01

Analyzing insurance-loss data we derive stochastic storm-damage functions for residential buildings. On district level we fit power-law relations between daily loss and maximum wind speed, typically spanning more than 4 orders of magnitude. The estimated exponents for 439 German districts roughly range from 8 to 12. In addition, we find correlations among the parameters and socio-demographic data, which we employ in a simplified parametrization of the damage function with just 3 independent parameters for each district. A Monte Carlo method is used to generate loss estimates and confidence bounds of daily and annual storm damages in Germany. Our approach reproduces the annual progression of winter storm losses and enables to estimate daily losses over a wide range of magnitudes.

The FHA domain determines Drosophila Chk2/Mnk localization to key mitotic structures and is essential for early embryonic DNA damage responses.

PubMed

Takada, Saeko; Collins, Eric R; Kurahashi, Kayo

2015-05-15

DNA damage responses, including mitotic centrosome inactivation, cell-cycle delay in mitosis, and nuclear dropping from embryo cortex, maintain genome integrity in syncytial Drosophila embryos. A conserved signaling kinase, Chk2, known as Mnk/Loki, is essential for the responses. Here we demonstrate that functional EGFP-Mnk expressed from a transgene localizes to the nucleus, centrosomes, interkinetochore/centromere region, midbody, and pseudocleavage furrows without DNA damage and in addition forms numerous foci/aggregates on mitotic chromosomes upon DNA damage. We expressed EGFP-tagged Mnk deletion or point mutation variants and investigated domain functions of Mnk in vivo. A triple mutation in the phosphopeptide-binding site of the forkhead-associated (FHA) domain disrupted normal Mnk localization except to the nucleus. The mutation also disrupted Mnk foci formation on chromosomes upon DNA damage. FHA mutations and deletion of the SQ/TQ-cluster domain (SCD) abolished Mnk transphosphorylations and autophosphorylations, indicative of kinase activation after DNA damage. A potent NLS was found at the C-terminus, which is required for normal Mnk function. We propose that the FHA domain in Mnk plays essential dual functions in mediating embryonic DNA damage responses by means of its phosphopeptide-binding ability: activating Mnk in the nucleus upon DNA damage and recruiting Mnk to multiple subcellular structures independently of DNA damage. © 2015 Takada et al. This article is distributed by The American Society for Cell Biology under license from the author(s). Two months after publication it is available to the public under an Attribution–Noncommercial–Share Alike 3.0 Unported Creative Commons License (http://creativecommons.org/licenses/by-nc-sa/3.0).

Mitochondrial DNA damage and vascular function in patients with diabetes mellitus and atherosclerotic cardiovascular disease.

PubMed

Fetterman, Jessica L; Holbrook, Monica; Westbrook, David G; Brown, Jamelle A; Feeley, Kyle P; Bretón-Romero, Rosa; Linder, Erika A; Berk, Brittany D; Weisbrod, Robert M; Widlansky, Michael E; Gokce, Noyan; Ballinger, Scott W; Hamburg, Naomi M

2016-03-31

Prior studies demonstrate mitochondrial dysfunction with increased reactive oxygen species generation in peripheral blood mononuclear cells in diabetes mellitus. Oxidative stress-mediated damage to mitochondrial DNA promotes atherosclerosis in animal models. Thus, we evaluated the relation of mitochondrial DNA damage in peripheral blood mononuclear cells s with vascular function in patients with diabetes mellitus and with atherosclerotic cardiovascular disease. We assessed non-invasive vascular function and mitochondrial DNA damage in 275 patients (age 57 ± 9 years, 60 % women) with atherosclerotic cardiovascular disease alone (N = 55), diabetes mellitus alone (N = 74), combined atherosclerotic cardiovascular disease and diabetes mellitus (N = 48), and controls age >45 without diabetes mellitus or atherosclerotic cardiovascular disease (N = 98). Mitochondrial DNA damage measured by quantitative PCR in peripheral blood mononuclear cells was higher with clinical atherosclerosis alone (0.55 ± 0.65), diabetes mellitus alone (0.65 ± 1.0), and combined clinical atherosclerosis and diabetes mellitus (0.89 ± 1.32) as compared to control subjects (0.23 ± 0.64, P < 0.0001). In multivariable models adjusting for age, sex, and relevant cardiovascular risk factors, clinical atherosclerosis and diabetes mellitus remained associated with higher mitochondrial DNA damage levels (β = 0.14 ± 0.13, P = 0.04 and β = 0.21 ± 0.13, P = 0.002, respectively). Higher mitochondrial DNA damage was associated with higher baseline pulse amplitude, a measure of arterial pulsatility, but not with flow-mediated dilation or hyperemic response, measures of vasodilator function. We found greater mitochondrial DNA damage in patients with diabetes mellitus and clinical atherosclerosis. The association of mitochondrial DNA damage and baseline pulse amplitude may suggest a link between mitochondrial dysfunction and excessive small artery pulsatility with potentially adverse microvascular impact.

A novel regulation mechanism of DNA repair by damage-induced and RAD23-dependent stabilization of xeroderma pigmentosum group C protein

PubMed Central

Ng, Jessica M.Y.; Vermeulen, Wim; van der Horst, Gijsbertus T.J.; Bergink, Steven; Sugasawa, Kaoru; Vrieling, Harry; Hoeijmakers, Jan H.J.

2003-01-01

Primary DNA damage sensing in mammalian global genome nucleotide excision repair (GG-NER) is performed by the xeroderma pigmentosum group C (XPC)/HR23B protein complex. HR23B and HR23A are human homologs of the yeast ubiquitin-domain repair factor RAD23, the function of which is unknown. Knockout mice revealed that mHR23A and mHR23B have a fully redundant role in NER, and a partially redundant function in embryonic development. Inactivation of both genes causes embryonic lethality, but appeared still compatible with cellular viability. Analysis of mHR23A/B double-mutant cells showed that HR23 proteins function in NER by governing XPC stability via partial protection against proteasomal degradation. Interestingly, NER-type DNA damage further stabilizes XPC and thereby enhances repair. These findings resolve the primary function of RAD23 in repair and reveal a novel DNA-damage-dependent regulation mechanism of DNA repair in eukaryotes, which may be part of a more global damage-response circuitry. PMID:12815074

The Effects of Brain Damage on Visual Functioning in Children.

ERIC Educational Resources Information Center

Alexander, P. K.

1990-01-01

The review of research concluded that, although brain damage affects visual functioning, the prognosis for good functional vision after remedial intervention is better than previously thought. Although electrodiagnostic testing was found to be valuable, use of a combination of tests is recommended to obtain the most complete picture of brain…

A Review of Patents for the Smart Packaging of Meat and Muscle-based Food Products.

PubMed

Holman, Benjamin; Kerry, Joseph P; Hopkins, David L

2017-10-31

Meat packaging once acted primarily as an inert barrier to protect its contents against contamination and this function has shifted. Packaging now includes complementary functions that improve product quality, longevity and customer/retail appeal. The devices and methods applied to achieve these functions may be categorised as smart packaging, which includes intelligent packaging, devised to monitor and communicate packaged content status, and active packaging, to provide passive adjustment of in-pack conditions from its interactions with the packaged meat. Smart packaging examples already available from recent patents include antimicrobial and antioxidant packaging coatings and inserts; sensors or indicators that identify spoilage and freshness; functional engineering customisations; improvements to packaging integrity; leak or tamper detectors; and, environmentally sustainable options. Together, these inventions respond to industry and customer demands for meat packaging and are therefore the focus of this review, in which we discuss their applications and limitations in meat packaging. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

Bioinspired Functionalized Melanin Nanovariants with a Range of Properties Provide Effective Color Matched Photoprotection in Skin.

PubMed

Vij, Manika; Grover, Ritika; Gotherwal, Vishvabandhu; Wani, Naiem Ahmad; Joshi, Prashant; Gautam, Hemlata; Sharma, Kanupriya; Chandna, Sudhir; Gokhale, Rajesh S; Rai, Rajkishor; Ganguli, Munia; Natarajan, Vivek T

2016-09-12

Melanin and related polydopamine hold great promise; however, restricted fine-tunabilility limits their usefulness in biocompatible applications. In the present study, by taking a biomimetic approach, we synthesize peptide-derived melanin with a range of physicochemical properties. Characterization of these melanin polymers indicates that they exist as nanorange materials with distinct size distribution, shapes, and surface charges. These variants demonstrate similar absorption spectra but have different optical properties that correlate with particle size. Our approach enables incorporation of chemical groups to create functionalized polyvalent organic nanomaterials and enables customization of melanin. Further, we establish that these synthetic variants are efficiently taken up by the skin keratinocytes, display appreciable photoprotection with minimal cytotoxicity, and thereby function as effective color matched photoprotective agents. In effect we demonstrate that an array of functionalized melanins with distinct properties could be synthesized using bioinspired green chemistry, and these are of immense utility in generating customized melanin/polydopamine like materials.

Postconditioning with repeated mild hypoxia protects neonatal hypoxia-ischemic rats against brain damage and promotes rehabilitation of brain function.

PubMed

Deng, Qingqing; Chang, Yanqun; Cheng, Xiaomao; Luo, Xingang; Zhang, Jing; Tang, Xiaoyuan

2018-05-01

Mild hypoxia conditioning induced by repeated episodes of transient ischemia is a clinically applicable method for protecting the brain against injury after hypoxia-ischemic brain damage. To assess the effect of repeated mild hypoxia postconditioning on brain damage and long-term neural functional recovery after hypoxia-ischemic brain damage. Rats received different protocols of repeated mild hypoxia postconditioning. Seven-day-old rats with hypoxia ischemic brain damage (HIBD) from the left carotid ligation procedure plus 2 h hypoxic stress (8% O 2 at 37 °C) were further receiving repeated mild hypoxia intermittently. The gross anatomy, functional analyses, hypoxia inducible factor 1 alpha (HIF-1a) expression, and neuronal apoptosis of the rat brains were subsequently examined. Compared to the HIBD group, rats postconditioned with mild hypoxia had elevated HIF-1a expression, more Nissl-stain positive cells in their brain tissue and their brains functioned better in behavioral analyses. The recovery of the brain function may be directly linked to the inhibitory effect of HIF-1α on neuronal apoptosis. Furthermore, there were significantly less neuronal apoptosis in the hippocampal CA1 region of the rats postconditioned with mild hypoxia, which might also be related to the higher HIF-1a expression and better brain performance. Overall, these results suggested that postconditioning of neonatal rats after HIBD with mild hypoxia increased HIF-1a expression, exerted a neuroprotective effect and promoted neural functional recovery. Repeated mild hypoxia postconditioning protects neonatal rats with HIBD against brain damage and improves neural functional recovery. Our results may have clinical implications for treating infants with HIBD. Copyright © 2018 Elsevier Inc. All rights reserved.

A single portion of blueberry (Vaccinium corymbosum L) improves protection against DNA damage but not vascular function in healthy male volunteers.

PubMed

Del Bó, Cristian; Riso, Patrizia; Campolo, Jonica; Møller, Peter; Loft, Steffen; Klimis-Zacas, Dorothy; Brambilla, Ada; Rizzolo, Anna; Porrini, Marisa

2013-03-01

It has been suggested that anthocyanin-rich foods may exert antioxidant effects and improve vascular function as demonstrated mainly in vitro and in the animal model. Blueberries are rich sources of anthocyanins and we hypothesized that their intake could improve cell protection against oxidative stress and affect endothelial function in humans. The aim of the study was to investigate the effect of one portion (300 g) of blueberries on selected markers of oxidative stress and antioxidant protection (endogenous and oxidatively induced DNA damage) and of vascular function (changes in peripheral arterial tone and plasma nitric oxide levels) in male subjects. In a randomized cross-over design, separated by a wash out period ten young volunteers received one portion of blueberries ground by blender or one portion of a control jelly. Before and after consumption (at 1, 2, and 24 hours), blood samples were collected and used to evaluate anthocyanin absorption (through mass spectrometry), endogenous and H(2)O(2)-induced DNA damage in blood mononuclear cells (through the comet assay), and plasma nitric oxide concentrations (through a fluorometric assay). Peripheral arterial function was assessed by means of Endo-PAT 2000. Blueberries significantly reduced (P < .01) H(2)O(2)-induced DNA damage (-18%) 1 hour after blueberry consumption compared to control. No significant differences were observed for endogenous DNA damage, peripheral arterial function and nitric oxide levels after blueberry intake. In conclusion, one portion of blueberries seems sufficient to improve cell antioxidant defense against DNA damage, but further studies are necessary to understand their role on vascular function. Copyright © 2013 Elsevier Inc. All rights reserved.

A group arrival retrial G - queue with multi optional stages of service, orbital search and server breakdown

NASA Astrophysics Data System (ADS)

Radha, J.; Indhira, K.; Chandrasekaran, V. M.

2017-11-01

A group arrival feedback retrial queue with k optional stages of service and orbital search policy is studied. Any arriving group of customer finds the server free, one from the group enters into the first stage of service and the rest of the group join into the orbit. After completion of the i th stage of service, the customer under service may have the option to choose (i+1)th stage of service with θi probability, with pI probability may join into orbit as feedback customer or may leave the system with {q}i=≤ft\\{\\begin{array}{l}1-{p}i-{θ }i,i=1,2,\\cdots k-1\\ 1-{p}i,i=k\\end{array}\\right\\} probability. Busy server may get to breakdown due to the arrival of negative customers and the service channel will fail for a short interval of time. At the completion of service or repair, the server searches for the customer in the orbit (if any) with probability α or remains idle with probability 1-α. By using the supplementary variable method, steady state probability generating function for system size, some system performance measures are discussed.

General bulk service queueing system with N-policy, multiplevacations, setup time and server breakdown without interruption

NASA Astrophysics Data System (ADS)

Sasikala, S.; Indhira, K.; Chandrasekaran, V. M.

2017-11-01

In this paper, we have considered an MX / (a,b) / 1 queueing system with server breakdown without interruption, multiple vacations, setup times and N-policy. After a batch of service, if the size of the queue is ξ (< a), then the server immediately takes a vacation. Upon returns from a vacation, if the queue is less than N, then the server takes another vacation. This process continues until the server finds atleast N customers in the queue. After a vacation, if the server finds at least N customers waiting for service, then the server needs a setup time to start the service. After a batch of service, if the amount of waiting customers in the queue is ξ (≥ a) then the server serves a batch of min(ξ,b) customers, where b ≥ a. We derived the probability generating function of queue length at arbitrary time epoch. Further, we obtained some important performance measures.

Extending the multifoci perspective: The role of supervisor justice and moral identity in the relationship between customer justice and customer-directed sabotage.

PubMed

Skarlicki, Daniel P; van Jaarsveld, Danielle D; Shao, Ruodan; Song, Young Ho; Wang, Mo

2016-01-01

The multifoci perspective of justice proposes that individuals tend to target their (in)justice reactions toward the perceived source of the mistreatment. Empirical support for target-specific reactions, however, has been mixed. To explore theoretically relevant reasons for these discrepant results and address unanswered questions in the multifoci justice literature, the present research examines how different justice sources might interactively predict target-specific reactions, and whether these effects occur as a function of moral identity. Results from a sample of North American frontline service employees (N = 314, Study 1) showed that among employees with lower levels of moral identity, low supervisor justice exacerbated the association between low customer justice and customer-directed sabotage, whereas this exacerbation effect was not observed among employees with higher levels of moral identity. This 3-way interaction effect was replicated in a sample of South Korean employees (N = 265, Study 2). (c) 2016 APA, all rights reserved).

RASTtk: A modular and extensible implementation of the RAST algorithm for building custom annotation pipelines and annotating batches of genomes

DOE PAGES

Brettin, Thomas; Davis, James J.; Disz, Terry; ...

2015-02-10

The RAST (Rapid Annotation using Subsystem Technology) annotation engine was built in 2008 to annotate bacterial and archaeal genomes. It works by offering a standard software pipeline for identifying genomic features (i.e., protein-encoding genes and RNA) and annotating their functions. Recently, in order to make RAST a more useful research tool and to keep pace with advancements in bioinformatics, it has become desirable to build a version of RAST that is both customizable and extensible. In this paper, we describe the RAST tool kit (RASTtk), a modular version of RAST that enables researchers to build custom annotation pipelines. RASTtk offersmore » a choice of software for identifying and annotating genomic features as well as the ability to add custom features to an annotation job. RASTtk also accommodates the batch submission of genomes and the ability to customize annotation protocols for batch submissions. This is the first major software restructuring of RAST since its inception.« less

Aircraft signal definition for flight safety system monitoring system

NASA Technical Reports Server (NTRS)

Gibbs, Michael (Inventor); Omen, Debi Van (Inventor)

2003-01-01

A system and method compares combinations of vehicle variable values against known combinations of potentially dangerous vehicle input signal values. Alarms and error messages are selectively generated based on such comparisons. An aircraft signal definition is provided to enable definition and monitoring of sets of aircraft input signals to customize such signals for different aircraft. The input signals are compared against known combinations of potentially dangerous values by operational software and hardware of a monitoring function. The aircraft signal definition is created using a text editor or custom application. A compiler receives the aircraft signal definition to generate a binary file that comprises the definition of all the input signals used by the monitoring function. The binary file also contains logic that specifies how the inputs are to be interpreted. The file is then loaded into the monitor function, where it is validated and used to continuously monitor the condition of the aircraft.

Online Assessment of Satellite-Derived Global Precipitation Products

NASA Technical Reports Server (NTRS)

Liu, Zhong; Ostrenga, D.; Teng, W.; Kempler, S.

2012-01-01

Precipitation is difficult to measure and predict. Each year droughts and floods cause severe property damages and human casualties around the world. Accurate measurement and forecast are important for mitigation and preparedness efforts. Significant progress has been made over the past decade in satellite precipitation product development. In particular, products' spatial and temporal resolutions as well as timely availability have been improved by blended techniques. Their resulting products are widely used in various research and applications. However biases and uncertainties are common among precipitation products and an obstacle exists in quickly gaining knowledge of product quality, biases and behavior at a local or regional scale, namely user defined areas or points of interest. Current online inter-comparison and validation services have not addressed this issue adequately. To address this issue, we have developed a prototype to inter-compare satellite derived daily products in the TRMM Online Visualization and Analysis System (TOVAS). Despite its limited functionality and datasets, users can use this tool to generate customized plots within the United States for 2005. In addition, users can download customized data for further analysis, e.g. comparing their gauge data. To meet increasing demands, we plan to increase the temporal coverage and expanded the spatial coverage from the United States to the globe. More products have been added as well. In this poster, we present two new tools: Inter-comparison of 3B42RT and 3B42 Inter-comparison of V6 and V7 TRMM L-3 monthly products The future plans include integrating IPWG (International Precipitation Working Group) Validation Algorithms/statistics, allowing users to generate customized plots and data. In addition, we will expand the current daily products to monthly and their climatology products. Whenever the TRMM science team changes their product version number, users would like to know the differences by inter-comparing both versions of TRMM products in their areas of interest. Making this service available to users will help them to better understand associated changes. We plan to implement this inter-comparison in TRMM standard monthly products with the IPWG algorithms. The plans outlined above will complement and accelerate the existing and ongoing validation activities in the community as well as enhance data services for TRMM and the future Global Precipitation Mission (GPM).

Modeling and Measuring the Effects of Radiation Damage Annealing on Helium Diffusion Kinetics in Apatite

NASA Astrophysics Data System (ADS)

Willett, C. D.; Fox, M.; Shuster, D. L.

2016-12-01

Understanding helium diffusion kinetics in apatite is critical for the accurate interpretation of (U-Th)/He thermochronometric data. This problem is complicated by the observation that helium diffusivity is not a simple function of temperature, but may evolve as a function of damage to the apatite crystal lattice resulting from alpha recoil. This `radiation damage' increases as a function of the amount of radiometric parent products, or effective uranium concentration, and time, but decreases due to thermal annealing of damage, necessitating a detailed understanding of radiation damage production and annealing in cases of burial heating over geologic timescales. Published observations [1,2] suggest that annealing rates of damage caused by alpha recoil and fission tracks in apatite differ. Existing models, however, assume the diffusion kinetics resulting from the two sources of damage are identical [3], demonstrating the need for further investigation of these damage sources. We present modeling and experimental work designed to interrogate the effects of radiation damage and its annealing on helium diffusion kinetics in apatite. Using previously published results [4] that investigated the effects of annealing temperature and duration on measured helium diffusivity, we fit a set of functions that are then integrated into a numerical model that tracks the evolution of radiation damage and apparent (U-Th)/He age. We compare the results of this model calibration to existing models [3]. In addition, we present data from two suites of diffusion experiments. The first suite, intended to test the published methodology and results, uses Durango apatite, while the second uses Sierran (CA) granite as a first test to determine if apatite of varying chemistry and age responds differently to the thermal annealing of radiation damage. Ultimately, the updated model and experimental results will benefit the interpretation of the effects of radiation damage accumulation and annealing in apatite and expand the range of geologic settings that can be studied using low-temperature thermochronology. References: [1] Fox, M., Shuster, D. (2014), EPSL 397, 174-183; [2] Gautheron, C. et al. (2013), Chem. Geol. 351, 257-267; [3] Flowers, R. et al. (2009), GCA 73, 2347-2365; [4] Shuster, D., Farley, K. (2009), GCA 73, 6183-6196.

Cyclic loading increases friction and changes cartilage surface integrity in lubricin-mutant mouse knees

PubMed Central

Drewniak, Elizabeth I; Jay, Gregory D; Fleming, Braden C; Zhang, Ling; Warman, Matthew L; Crisco, Joseph J

2012-01-01

Objective To investigate the effects of lubricin gene dosage and cyclic loading on whole joint coefficient of friction and articular cartilage surface integrity in mouse knee joints. Methods Joints from mice with 2 (Prg4+/+), 1 (Prg4+/−), or no (Prg4−/−) functioning lubricin alleles were subjected to 26 hours of cyclic loading using a custom-built pendulum. Coefficient of friction values were measured at multiple time points. Contralateral control joints were left unloaded. Following testing, joints were examined for histologic evidence of damage and cell viability. Results At baseline, the coefficient of friction values in Prg4−/− mice were significantly higher than those in Prg4+/+ and Prg4+/− mice (P < 0.001). Cyclic loading continuously increased the coefficient of friction in Prg4−/− mouse joints. In contrast, Prg4+/− and Prg4+/+ mouse joints had no coefficient of friction increases during the first 4 hours of loading. After 26 hours of loading, joints from all genotypes had increased coefficient of friction values compared to baseline and unloaded controls. Significantly greater increases occurred in Prg4−/− and Prg4+/− mouse joints compared to Prg4+/+ mouse joints. The coefficient of friction values were not significantly associated with histologic evidence of damage or loss of cell viability. Conclusion Our findings indicate that mice lacking lubricin have increased baseline coefficient of friction values and are not protected against further increases caused by loading. Prg4+/− mice are indistinguishable from Prg4+/+ mice at baseline, but have significantly greater coefficient of friction values following 26 hours of loading. Lubricin dosage affects joint properties during loading, and may have clinical implications in patients for whom injury or illness alters lubricin abundance. PMID:21905020

Development of a systems-based in situ multiplex biomarker screening approach for the assessment of immunopathology and neural tissue plasticity in male rats after traumatic brain injury.

PubMed

Bogoslovsky, Tanya; Bernstock, Joshua D; Bull, Greg; Gouty, Shawn; Cox, Brian M; Hallenbeck, John M; Maric, Dragan

2018-04-01

Traumatic brain injuries (TBIs) pose a massive burden of disease and continue to be a leading cause of morbidity and mortality throughout the world. A major obstacle in developing effective treatments is the lack of comprehensive understanding of the underlying mechanisms that mediate tissue damage and recovery after TBI. As such, our work aims to highlight the development of a novel experimental platform capable of fully characterizing the underlying pathobiology that unfolds after TBI. This platform encompasses an empirically optimized multiplex immunohistochemistry staining and imaging system customized to screen for a myriad of biomarkers required to comprehensively evaluate the extent of neuroinflammation, neural tissue damage, and repair in response to TBI. Herein, we demonstrate that our multiplex biomarker screening platform is capable of evaluating changes in both the topographical location and functional states of resident and infiltrating cell types that play a role in neuropathology after controlled cortical impact injury to the brain in male Sprague-Dawley rats. Our results demonstrate that our multiplex biomarker screening platform lays the groundwork for the comprehensive characterization of changes that occur within the brain after TBI. Such work may ultimately lead to the understanding of the governing pathobiology of TBI, thereby fostering the development of novel therapeutic interventions tailored to produce optimal tissue protection, repair, and/or regeneration with minimal side effects, and may ultimately find utility in a wide variety of other neurological injuries, diseases, and disorders that share components of TBI pathobiology. Published 2017. This article is a U.S. Government work and is in the public domain in the USA.

The AskIT Service Desk: A Model for Improving Productivity and Reducing Costs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ashcraft, Phillip Lynn; Fogle, Blythe G.; Cummings, Susan M.

This was prepared for the business process improvement presentation to the Department of Energy. Los Alamos National Laboratory provides a single point of contact, the AskIT Service Desk, to address issues that impact customer productivity. At the most basic level, what customers want is for their calls to be received, to get a response from a knowledgeable analyst, and to have their issues resolved and their requests fulfilled. Providing a centralized, single point of contact service desk makes initiating technical or business support simple for the customer and improves the odds of immediately resolving the issue or correctly escalating themore » request to the next support level when necessary. Fulfilling customer requests through automated workflow also improves customer productivity and reduces costs. Finally, customers should be provided the option to solve their own problems through easy access to self-help resources such as frequently asked questions (FAQs) and how-to guides. To accomplish this, everyone who provides and supports services must understand how these processes and functions work together. Service providers and those who support services must “speak the same language” and share common objectives. The Associate Directorate for Business Innovation (ADBI) began the journey to improve services by selecting a known service delivery framework (Information Technology Infrastructure Library, or ITIL). From this framework, components that contribute significant business value were selected.« less

Cooperative fuzzy games approach to setting target levels of ECs in quality function deployment.

PubMed

Yang, Zhihui; Chen, Yizeng; Yin, Yunqiang

2014-01-01

Quality function deployment (QFD) can provide a means of translating customer requirements (CRs) into engineering characteristics (ECs) for each stage of product development and production. The main objective of QFD-based product planning is to determine the target levels of ECs for a new product or service. QFD is a breakthrough tool which can effectively reduce the gap between CRs and a new product/service. Even though there are conflicts among some ECs, the objective of developing new product is to maximize the overall customer satisfaction. Therefore, there may be room for cooperation among ECs. A cooperative game framework combined with fuzzy set theory is developed to determine the target levels of the ECs in QFD. The key to develop the model is the formulation of the bargaining function. In the proposed methodology, the players are viewed as the membership functions of ECs to formulate the bargaining function. The solution for the proposed model is Pareto-optimal. An illustrated example is cited to demonstrate the application and performance of the proposed approach.

pH-triggered conduction of amine-functionalized single ZnO wire integrated on a customized nanogap electronic platform

PubMed Central

2014-01-01

The electrical conductance response of single ZnO microwire functionalized with amine-groups was tested upon an acid pH variation of a solution environment after integration on a customized gold electrode array chip. ZnO microwires were easily synthesized by hydrothermal route and chemically functionalized with aminopropyl groups. Single wires were deposited from the solution and then oriented through dielectrophoresis across eight nanogap gold electrodes on a platform single chip. Therefore, eight functionalized ZnO microwire-gold junctions were formed at the same time, and being integrated on an ad hoc electronic platform, they were ready for testing without any further treatment. Experimental and simulation studies confirmed the high pH-responsive behavior of the amine-modified ZnO-gold junctions, obtaining in a simple and reproducible way a ready-to-use device for pH detection in the acidic range. We also compared this performance to bare ZnO wires on the same electronic platform, showing the superiority in pH response of the amine-functionalized material. PMID:24484615

Using scale and feather traits for module construction provides a functional approach to chicken epidermal development.

PubMed

Bao, Weier; Greenwold, Matthew J; Sawyer, Roger H

2017-11-01

Gene co-expression network analysis has been a research method widely used in systematically exploring gene function and interaction. Using the Weighted Gene Co-expression Network Analysis (WGCNA) approach to construct a gene co-expression network using data from a customized 44K microarray transcriptome of chicken epidermal embryogenesis, we have identified two distinct modules that are highly correlated with scale or feather development traits. Signaling pathways related to feather development were enriched in the traditional KEGG pathway analysis and functional terms relating specifically to embryonic epidermal development were also enriched in the Gene Ontology analysis. Significant enrichment annotations were discovered from customized enrichment tools such as Modular Single-Set Enrichment Test (MSET) and Medical Subject Headings (MeSH). Hub genes in both trait-correlated modules showed strong specific functional enrichment toward epidermal development. Also, regulatory elements, such as transcription factors and miRNAs, were targeted in the significant enrichment result. This work highlights the advantage of this methodology for functional prediction of genes not previously associated with scale- and feather trait-related modules.

Cooperative Fuzzy Games Approach to Setting Target Levels of ECs in Quality Function Deployment

PubMed Central

Yang, Zhihui; Chen, Yizeng; Yin, Yunqiang

2014-01-01

Quality function deployment (QFD) can provide a means of translating customer requirements (CRs) into engineering characteristics (ECs) for each stage of product development and production. The main objective of QFD-based product planning is to determine the target levels of ECs for a new product or service. QFD is a breakthrough tool which can effectively reduce the gap between CRs and a new product/service. Even though there are conflicts among some ECs, the objective of developing new product is to maximize the overall customer satisfaction. Therefore, there may be room for cooperation among ECs. A cooperative game framework combined with fuzzy set theory is developed to determine the target levels of the ECs in QFD. The key to develop the model is the formulation of the bargaining function. In the proposed methodology, the players are viewed as the membership functions of ECs to formulate the bargaining function. The solution for the proposed model is Pareto-optimal. An illustrated example is cited to demonstrate the application and performance of the proposed approach. PMID:25097884

Comparative Study of Vibration Condition Indicators for Detecting Cracks in Spur Gears

NASA Technical Reports Server (NTRS)

Nanadic, Nenad; Ardis, Paul; Hood, Adrian; Thurston, Michael; Ghoshal, Anindya; Lewicki, David

2013-01-01

This paper reports the results of an empirical study on the tooth breakage failure mode in spur gears. Of four dominant gear failure modes (breakage, wear, pitting, and scoring), tooth breakage is the most precipitous and often leads to catastrophic failures. The cracks were initiated using a fatigue tester and a custom-designed single-tooth bending fixture to simulate over-load conditions, instead of traditional notching using wire electrical discharge machining (EDM). The cracks were then propagated on a dynamometer. The ground truth of damage level during crack propagation was monitored with crack-propagation sensors. Ten crack propagations have been performed to compare the existing condition indicators (CIs) with respect to their: ability to detect a crack, ability to assess the damage, and sensitivity to sensor placement. Of more than thirty computed CIs, this paper compares five commonly used: raw RMS, FM0, NA4, raw kurtosis, and NP4. The performance of combined CIs was also investigated, using linear, logistic, and boosted regression trees based feature fusion.

Interactive Web-based Floodplain Simulation System for Realistic Experiments of Flooding and Flood Damage

NASA Astrophysics Data System (ADS)

Demir, I.

2013-12-01

Recent developments in web technologies make it easy to manage and visualize large data sets with general public. Novel visualization techniques and dynamic user interfaces allow users to create realistic environments, and interact with data to gain insight from simulations and environmental observations. The floodplain simulation system is a web-based 3D interactive flood simulation environment to create real world flooding scenarios. The simulation systems provides a visually striking platform with realistic terrain information, and water simulation. Students can create and modify predefined scenarios, control environmental parameters, and evaluate flood mitigation techniques. The web-based simulation system provides an environment to children and adults learn about the flooding, flood damage, and effects of development and human activity in the floodplain. The system provides various scenarios customized to fit the age and education level of the users. This presentation provides an overview of the web-based flood simulation system, and demonstrates the capabilities of the system for various flooding and land use scenarios.

Ultrasonic NDE Simulation for Composite Manufacturing Defects

NASA Technical Reports Server (NTRS)

Leckey, Cara A. C.; Juarez, Peter D.

2016-01-01

The increased use of composites in aerospace components is expected to continue into the future. The large scale use of composites in aerospace necessitates the development of composite-appropriate nondestructive evaluation (NDE) methods to quantitatively characterize defects in as-manufactured parts and damage incurred during or post manufacturing. Ultrasonic techniques are one of the most common approaches for defect/damage detection in composite materials. One key technical challenge area included in NASA's Advanced Composite's Project is to develop optimized rapid inspection methods for composite materials. Common manufacturing defects in carbon fiber reinforced polymer (CFRP) composites include fiber waviness (in-plane and out-of-plane), porosity, and disbonds; among others. This paper is an overview of ongoing work to develop ultrasonic wavefield based methods for characterizing manufacturing waviness defects. The paper describes the development and implementation of a custom ultrasound simulation tool that is used to model ultrasonic wave interaction with in-plane fiber waviness (also known as marcelling). Wavefield data processing methods are applied to the simulation data to explore possible routes for quantitative defect characterization.

Lung imaging of laboratory rodents in vivo

NASA Astrophysics Data System (ADS)

Cody, Dianna D.; Cavanaugh, Dawn; Price, Roger E.; Rivera, Belinda; Gladish, Gregory; Travis, Elizabeth

2004-10-01

We have been acquiring respiratory-gated micro-CT images of live mice and rats for over a year with our General Electric (formerly Enhanced Vision Systems) hybrid scanner. This technique is especially well suited for the lung due to the inherent high tissue contrast. Our current studies focus on the assessment of lung tumors and their response to experimental agents, and the assessment of lung damage due to chemotherapy agents. We have recently installed a custom-built dual flat-panel cone-beam CT scanner with the ability to scan laboratory animals that vary in size from mice to large dogs. A breath-hold technique is used in place of respiratory gating on this scanner. The objective of this pilot study was to converge on scan acquisition parameters and optimize the visualization of lung damage in a mouse model of fibrosis. Example images from both the micro-CT scanner and the flat-panel CT scanner will be presented, as well as preliminary data describing spatial resolution, low contrast resolution, and radiation dose parameters.

Docosahexaenoic acid augments hypothermic neuroprotection in a neonatal rat asphyxia model.

PubMed

Berman, Deborah R; Mozurkewich, Ellen; Liu, Yiqing; Shangguan, Yu; Barks, John D; Silverstein, Faye S

2013-01-01

In neonatal rats, early post-hypoxia-ischemia (HI) administration of the omega-3 fatty acid docosahexaenoic acid (DHA) improves sensorimotor function, but does not attenuate brain damage. To determine if DHA administration in addition to hypothermia, now standard care for neonatal asphyxial brain injury, attenuates post-HI damage and sensorimotor deficits. Seven-day-old (P7) rats underwent right carotid ligation followed by 90 min of 8% O2 exposure. Fifteen minutes later, pups received injections of DHA 2.5 mg/kg (complexed to 25% albumin) or equal volumes of albumin. After a 1-hour recovery, pups were cooled (3 h, 30°C). Sensorimotor and pathology outcomes were initially evaluated on P14. In subsequent experiments, sensorimotor function was evaluated on P14, P21, and P28; histopathology was assessed on P28. At P14, left forepaw function scores (normal: 20/20) were near normal in DHA + hypothermia-treated animals (mean ± SD 19.7 ± 0.7 DHA + hypothermia vs. 12.7 ± 3.5 albumin + hypothermia, p < 0.0001) and brain damage was reduced (mean ± SD right hemisphere damage 38 ± 17% with DHA + hypothermia vs. 56 ± 15% with albumin + hypothermia, p = 0.003). Substantial improvements on three sensorimotor function measures and reduced brain damage were evident up to P28. Unlike post-HI treatment with DHA alone, treatment with DHA + hypothermia produced both sustained functional improvement and reduced brain damage after neonatal HI. Copyright © 2013 S. Karger AG, Basel.

MDC1: The art of keeping things in focus.

PubMed

Jungmichel, Stephanie; Stucki, Manuel

2010-08-01

The chromatin structure is important for recognition and repair of DNA damage. Many DNA damage response proteins accumulate in large chromatin domains flanking sites of DNA double-strand breaks. The assembly of these structures-usually termed DNA damage foci-is primarily regulated by MDC1, a large nuclear mediator/adaptor protein that is composed of several distinct structural and functional domains. Here, we are summarizing the latest discoveries about the mechanisms by which MDC1 mediates DNA damage foci formation, and we are reviewing the considerable efforts taken to understand the functional implication of these structures.

Impact Factors and Risk Analysis of Tropical Cyclones on a Highway Network.

PubMed

Yang, Saini; Hu, Fuyu; Jaeger, Carlo

2016-02-01

Coastal areas typically have high social and economic development and are likely to suffer huge losses due to tropical cyclones. These cyclones have a great impact on the transportation network, but there have been a limited number of studies about tropical-cyclone-induced transportation network functional damages, especially in Asia. This study develops an innovative measurement and analytical tool for highway network functional damage and risk in the context of a tropical cyclone, with which we explored the critical spatial characteristics of tropical cyclones with regard to functional damage to a highway network by developing linear regression models to quantify their relationship. Furthermore, we assessed the network's functional risk and calculated the return periods under different damage levels. In our analyses, we consider the real-world highway network of Hainan province, China. Our results illustrate that the most important spatial characteristics were location (in particular, the midlands), travel distance, landfalling status, and origin coordinates. However, the trajectory direction did not obviously affect the results. Our analyses indicate that the highway network of Hainan province may suffer from a 90% functional damage scenario every 4.28 years. These results have critical policy implications for the transport sector in reference to emergency planning and disaster reduction. © 2015 Society for Risk Analysis.

Linkages between organization climate and work outcomes: perceptual differences among health service professionals as a function of customer contact intensity.

PubMed

Scotti, Dennis J; Harmon, Joel

2014-01-01

The delivery of high-quality service, rendered by health service professionals who interact with customers (patients), increases the likelihood that customers will form positive evaluations of the quality of their service encounters as well as high levels of customer satisfaction. Using linkage theory to develop our conceptual framework, we identify four clusters of variables which contribute to a chain of sequential events that connect organization climate to personal and operational work outcomes. We then examine the perceptual differences of service professionals, grouped by intensity of customer contact, with respect to these variables. National data for this project were obtained from multiple sources made available by the Veterans Healthcare Administration (VHA). Cross-group differences were tested using a series of variance analyses. The results indicate that level of customer-contact intensity plays a significant role in explaining variation in perceptions of support staff, clinical practitioners, and nurses at the multivariate and univariate levels of analysis. Contact intensity appears to be a core determinant of the nature of work performed by health service professionals as well as their psychological responses to organizational and customer-related dynamics. Health service professionals are important resources because of their specialized knowledge, labor expense, and scarcity. Based on findings from our research, managers are advised to survey employees' perceptions of their organizational environment and design practices that respond to the unique viewpoints of each of the professional groups identified in this study. Such tailoring should help executives maximize the value of investments in human resources by underwriting patient satisfaction and financial sustainability.

Generating Customized Verifiers for Automatically Generated Code

NASA Technical Reports Server (NTRS)

Denney, Ewen; Fischer, Bernd

2008-01-01

Program verification using Hoare-style techniques requires many logical annotations. We have previously developed a generic annotation inference algorithm that weaves in all annotations required to certify safety properties for automatically generated code. It uses patterns to capture generator- and property-specific code idioms and property-specific meta-program fragments to construct the annotations. The algorithm is customized by specifying the code patterns and integrating them with the meta-program fragments for annotation construction. However, this is difficult since it involves tedious and error-prone low-level term manipulations. Here, we describe an annotation schema compiler that largely automates this customization task using generative techniques. It takes a collection of high-level declarative annotation schemas tailored towards a specific code generator and safety property, and generates all customized analysis functions and glue code required for interfacing with the generic algorithm core, thus effectively creating a customized annotation inference algorithm. The compiler raises the level of abstraction and simplifies schema development and maintenance. It also takes care of some more routine aspects of formulating patterns and schemas, in particular handling of irrelevant program fragments and irrelevant variance in the program structure, which reduces the size, complexity, and number of different patterns and annotation schemas that are required. The improvements described here make it easier and faster to customize the system to a new safety property or a new generator, and we demonstrate this by customizing it to certify frame safety of space flight navigation code that was automatically generated from Simulink models by MathWorks' Real-Time Workshop.

RNF168 forms a functional complex with RAD6 during the DNA damage response

PubMed Central

Liu, Chao; Wang, Degui; Wu, Jiaxue; Keller, Jennifer; Ma, Teng; Yu, Xiaochun

2013-01-01

Summary Protein ubiquitination plays an important role in initiating the DNA damage response. Following DNA damage, E2 ubiquitin conjugating enzymes are crucial for catalyzing substrate ubiquitination that recruits downstream DNA repair factors to DNA lesions. To identify novel E2 conjugating enzymes important for initiating the DNA-damage-induced ubiquitination cascade, we screened most of the known E2 enzymes and found that RAD6A and RAD6B function together with RNF168 in the ionizing radiation (IR)-induced DNA damage response. Similarly to RNF168-deficient cells, RAD6A- or RAD6B-deficient cells exhibit a reduction in DNA-damage-induced protein ubiquitination. Correspondingly, DNA-damage-induced foci formation of DNA damage repair proteins, such as BRCA1 and 53BP1, is impaired in the absence of RAD6A or RAD6B. Moreover, the RNF168–RAD6 complex targeted histone H1.2 for ubiquitination in vitro and regulated DNA-damage-induced histone H1.2 ubiquitination in vivo. Collectively, these data demonstrate that RNF168, in complex with RAD6A or RAD6B, is activated in the DNA-damage-induced protein ubiquitination cascade. PMID:23525009

Covariance of dynamic strain responses for structural damage detection

NASA Astrophysics Data System (ADS)

Li, X. Y.; Wang, L. X.; Law, S. S.; Nie, Z. H.

2017-10-01

A new approach to address the practical problems with condition evaluation/damage detection of structures is proposed based on the distinct features of a new damage index. The covariance of strain response function (CoS) is a function of modal parameters of the structure. A local stiffness reduction in structure would cause monotonous increase in the CoS. Its sensitivity matrix with respect to local damages of structure is negative and narrow-banded. The damage extent can be estimated with an approximation to the sensitivity matrix to decouple the identification equations. The CoS sensitivity can be calibrated in practice from two previous states of measurements to estimate approximately the damage extent of a structure. A seven-storey plane frame structure is numerically studied to illustrate the features of the CoS index and the proposed method. A steel circular arch in the laboratory is tested. Natural frequencies changed due to damage in the arch and the damage occurrence can be judged. However, the proposed CoS method can identify not only damage happening but also location, even damage extent without need of an analytical model. It is promising for structural condition evaluation of selected components.

The Cell's Sophisticated Army to Defend Against Assaults on DNAThe Cell's Sophisticated Army to Defend Against Assaults on DNA | Center for Cancer Research

Cancer.gov

The maintenance of genome integrity and function is essen-tial for the survival of cells and organisms. Any damage to our genetic material must be immediately sensed and repaired to preserve a cell’s func-tional integrity. Cells are constantly faced with the challenge of protecting their DNA from assaults by damaging chemicals and ultraviolet light. DNA damage that escapes

Comparing the ISO-recommended and the cumulative data-reduction algorithms in S-on-1 laser damage test by a reverse approach method

NASA Astrophysics Data System (ADS)

Zorila, Alexandru; Stratan, Aurel; Nemes, George

2018-01-01

We compare the ISO-recommended (the standard) data-reduction algorithm used to determine the surface laser-induced damage threshold of optical materials by the S-on-1 test with two newly suggested algorithms, both named "cumulative" algorithms/methods, a regular one and a limit-case one, intended to perform in some respects better than the standard one. To avoid additional errors due to real experiments, a simulated test is performed, named the reverse approach. This approach simulates the real damage experiments, by generating artificial test-data of damaged and non-damaged sites, based on an assumed, known damage threshold fluence of the target and on a given probability distribution function to induce the damage. In this work, a database of 12 sets of test-data containing both damaged and non-damaged sites was generated by using four different reverse techniques and by assuming three specific damage probability distribution functions. The same value for the threshold fluence was assumed, and a Gaussian fluence distribution on each irradiated site was considered, as usual for the S-on-1 test. Each of the test-data was independently processed by the standard and by the two cumulative data-reduction algorithms, the resulting fitted probability distributions were compared with the initially assumed probability distribution functions, and the quantities used to compare these algorithms were determined. These quantities characterize the accuracy and the precision in determining the damage threshold and the goodness of fit of the damage probability curves. The results indicate that the accuracy in determining the absolute damage threshold is best for the ISO-recommended method, the precision is best for the limit-case of the cumulative method, and the goodness of fit estimator (adjusted R-squared) is almost the same for all three algorithms.

EvolView, an online tool for visualizing, annotating and managing phylogenetic trees.

PubMed

Zhang, Huangkai; Gao, Shenghan; Lercher, Martin J; Hu, Songnian; Chen, Wei-Hua

2012-07-01

EvolView is a web application for visualizing, annotating and managing phylogenetic trees. First, EvolView is a phylogenetic tree viewer and customization tool; it visualizes trees in various formats, customizes them through built-in functions that can link information from external datasets, and exports the customized results to publication-ready figures. Second, EvolView is a tree and dataset management tool: users can easily organize related trees into distinct projects, add new datasets to trees and edit and manage existing trees and datasets. To make EvolView easy to use, it is equipped with an intuitive user interface. With a free account, users can save data and manipulations on the EvolView server. EvolView is freely available at: http://www.evolgenius.info/evolview.html.

An indoor positioning technology in the BLE mobile payment system

NASA Astrophysics Data System (ADS)

Han, Tiantian; Ding, Lei

2017-05-01

Mobile payment system for large supermarkets, the core function is through the BLE low-power Bluetooth technology to achieve the amount of payment in the mobile payment system, can through an indoor positioning technology to achieve value-added services. The technology by collecting Bluetooth RSSI, the fingerprint database of sampling points corresponding is established. To get Bluetooth module RSSI by the AP. Then, to use k-Nearest Neighbor match the value of the fingerprint database. Thereby, to help businesses find customers through the mall location, combined settlement amount of the customer's purchase of goods, to analyze customer's behavior. When the system collect signal strength, the distribution of the sampling points of RSSI is analyzed and the value is filtered. The system, used in the laboratory is designed to demonstrate the feasibility.

EvolView, an online tool for visualizing, annotating and managing phylogenetic trees

PubMed Central

Zhang, Huangkai; Gao, Shenghan; Lercher, Martin J.; Hu, Songnian; Chen, Wei-Hua

2012-01-01

EvolView is a web application for visualizing, annotating and managing phylogenetic trees. First, EvolView is a phylogenetic tree viewer and customization tool; it visualizes trees in various formats, customizes them through built-in functions that can link information from external datasets, and exports the customized results to publication-ready figures. Second, EvolView is a tree and dataset management tool: users can easily organize related trees into distinct projects, add new datasets to trees and edit and manage existing trees and datasets. To make EvolView easy to use, it is equipped with an intuitive user interface. With a free account, users can save data and manipulations on the EvolView server. EvolView is freely available at: http://www.evolgenius.info/evolview.html. PMID:22695796

A thermodynamic approach to nonlinear ultrasonics for material state awareness and prognosis

NASA Astrophysics Data System (ADS)

Chillara, Vamshi Krishna

2017-11-01

We develop a thermodynamic framework for modeling nonlinear ultrasonic damage sensing and prognosis in materials undergoing progressive damage. The framework is based on the internal variable approach and relies on the construction of a pseudo-elastic strain energy function that captures the energetics associated with the damage progression. The pseudo-elastic strain energy function is composed of two energy functions—one that describes how a material stores energy in an elastic fashion and the other describes how material dissipates energy or stores it in an inelastic fashion. Experimental motivation for the choice of the above two functionals is discussed and some specific choices pertaining to damage progression during fatigue and creep are presented. The thermodynamic framework is employed to model the nonlinear response of material undergoing stress relaxation and creep-like degradation. For each of the above cases, evolution of the nonlinearity parameter with damage as well as with macroscopic measurables like accumulated plastic strain is obtained.

A Flexible Online Metadata Editing and Management System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Aguilar, Raul; Pan, Jerry Yun; Gries, Corinna

2010-01-01

A metadata editing and management system is being developed employing state of the art XML technologies. A modular and distributed design was chosen for scalability, flexibility, options for customizations, and the possibility to add more functionality at a later stage. The system consists of a desktop design tool or schema walker used to generate code for the actual online editor, a native XML database, and an online user access management application. The design tool is a Java Swing application that reads an XML schema, provides the designer with options to combine input fields into online forms and give the fieldsmore » user friendly tags. Based on design decisions, the tool generates code for the online metadata editor. The code generated is an implementation of the XForms standard using the Orbeon Framework. The design tool fulfills two requirements: First, data entry forms based on one schema may be customized at design time and second data entry applications may be generated for any valid XML schema without relying on custom information in the schema. However, the customized information generated at design time is saved in a configuration file which may be re-used and changed again in the design tool. Future developments will add functionality to the design tool to integrate help text, tool tips, project specific keyword lists, and thesaurus services. Additional styling of the finished editor is accomplished via cascading style sheets which may be further customized and different look-and-feels may be accumulated through the community process. The customized editor produces XML files in compliance with the original schema, however, data from the current page is saved into a native XML database whenever the user moves to the next screen or pushes the save button independently of validity. Currently the system uses the open source XML database eXist for storage and management, which comes with third party online and desktop management tools. However, access to metadata files in the application introduced here is managed in a custom online module, using a MySQL backend accessed by a simple Java Server Faces front end. A flexible system with three grouping options, organization, group and single editing access is provided. Three levels were chosen to distribute administrative responsibilities and handle the common situation of an information manager entering the bulk of the metadata but leave specifics to the actual data provider.« less

Interface Control Document for the EMPACT Module that Estimates Electric Power Transmission System Response to EMP-Caused Damage

DOE Office of Scientific and Technical Information (OSTI.GOV)

Werley, Kenneth Alan; Mccown, Andrew William

The EPREP code is designed to evaluate the effects of an Electro-Magnetic Pulse (EMP) on the electric power transmission system. The EPREP code embodies an umbrella framework that allows a user to set up analysis conditions and to examine analysis results. The code links to three major physics/engineering modules. The first module describes the EM wave in space and time. The second module evaluates the damage caused by the wave on specific electric power (EP) transmission system components. The third module evaluates the consequence of the damaged network on its (reduced) ability to provide electric power to meet demand. Thismore » third module is the focus of the present paper. The EMPACT code serves as the third module. The EMPACT name denotes EMP effects on Alternating Current Transmission systems. The EMPACT algorithms compute electric power transmission network flow solutions under severely damaged network conditions. Initial solutions are often characterized by unacceptible network conditions including line overloads and bad voltages. The EMPACT code contains algorithms to adjust optimally network parameters to eliminate network problems while minimizing outages. System adjustments include automatically adjusting control equipment (generator V control, variable transformers, and variable shunts), as well as non-automatic control of generator power settings and minimal load shedding. The goal is to evaluate the minimal loss of customer load under equilibrium (steady-state) conditions during peak demand.« less

Genome-Wide Requirements for Resistance to Functionally Distinct DNA-Damaging Agents

PubMed Central

Proctor, Michael; Flaherty, Patrick; Jordan, Michael I; Arkin, Adam P; Davis, Ronald W; Nislow, Corey; Giaever, Guri

2005-01-01

The mechanistic and therapeutic differences in the cellular response to DNA-damaging compounds are not completely understood, despite intense study. To expand our knowledge of DNA damage, we assayed the effects of 12 closely related DNA-damaging agents on the complete pool of ~4,700 barcoded homozygous deletion strains of Saccharomyces cerevisiae. In our protocol, deletion strains are pooled together and grown competitively in the presence of compound. Relative strain sensitivity is determined by hybridization of PCR-amplified barcodes to an oligonucleotide array carrying the barcode complements. These screens identified genes in well-characterized DNA-damage-response pathways as well as genes whose role in the DNA-damage response had not been previously established. High-throughput individual growth analysis was used to independently confirm microarray results. Each compound produced a unique genome-wide profile. Analysis of these data allowed us to determine the relative importance of DNA-repair modules for resistance to each of the 12 profiled compounds. Clustering the data for 12 distinct compounds uncovered both known and novel functional interactions that comprise the DNA-damage response and allowed us to define the genetic determinants required for repair of interstrand cross-links. Further genetic analysis allowed determination of epistasis for one of these functional groups. PMID:16121259

Resourcing the Training and Development Function. IES Report.

ERIC Educational Resources Information Center

Carter, A.; Hirsh, W.; Aston, J.

A study explored current practice in organizing and resourcing training and development (T&D) using survey responses from over 100 major private and public sector employers and case studies of T&D functions in 6 organizations. Business drivers for T&D were senior management as customers; diagnosis of training as "the…

SATWG networked quality function deployment

NASA Technical Reports Server (NTRS)

Brown, Don

1992-01-01

The initiative of this work is to develop a cooperative process for continual evolution of an integrated, time phased avionics technology plan that involves customers, technologists, developers, and managers. This will be accomplished by demonstrating a computer network technology to augment the Quality Function Deployment (QFD). All results are presented in viewgraph format.

Product development cycle time reduction

NASA Astrophysics Data System (ADS)

Farran, Robin

1992-05-01

We are facing here today the key issues that face us in the competitive environment. North American companies are struggling to compete in the global marketplace. Gone are the days when presence ensured success. Then, sales and earnings were guaranteed. Today the competition is intense. Many manufacturing and service companies are no longer competitive. Traditionally, manufacturing companies have created the most wealth for the community and economy. Losing this ability to create wealth is tragic and unnecessary. A company can only be successful by focusing on customer satisfaction at competitive costs. Revenue growth and earnings growth require a continuous stream of products that anticipate the customers' needs, result from shorter and shorter innovation cycles, continually improve in quality, and are produced at improved costs on each cycle. The best opportunities for increased quality and decreased costs are with new products. Sure, work on quality and costs everyday. The biggest changes, however, will come through the new product development cycle. We must improve our development processes to provide leadership products which result in high levels of customer satisfaction. This is a prerequisite for business success. When presence in the marketplace was a virtual guarantee of success for a North American company, technology tended to drive the products, and the customers bought virtually everything that was produced. Functional excellence was stressed within companies ... and that was enough. Effective planning processes were not a prerequisite for success. Today success demands highly developed business research and planning processes, and functional excellence combined with organizational capabilities that ensure commercialization excellence.

Enhanced Vertical Perception through Head-Related Impulse Response Customization Based on Pinna Response Tuning in the Median Plane

NASA Astrophysics Data System (ADS)

Shin, Ki Hoon; Park, Youngjin

Human's ability to perceive elevation of a sound and distinguish whether a sound is coming from the front or rear strongly depends on the monaural spectral features of the pinnae. In order to realize an effective virtual auditory display by HRTF (head-related transfer function) customization, the pinna responses were isolated from the median HRIRs (head-related impulse responses) of 45 individual HRIRs in the CIPIC HRTF database and modeled as linear combinations of 4 or 5 basic temporal shapes (basis functions) per each elevation on the median plane by PCA (principal components analysis) in the time domain. By tuning the weight of each basis function computed for a specific height to replace the pinna response in the KEMAR HRIR at the same height with the resulting customized pinna response and listening to the filtered stimuli over headphones, 4 individuals with normal hearing sensitivity were able to create a set of HRIRs that outperformed the KEMAR HRIRs in producing vertical effects with reduced front/back ambiguity in the median plane. Since the monaural spectral features of the pinnae are almost independent of azimuthal variation of the source direction, similar vertical effects could also be generated at different azimuthal directions simply by varying the ITD (interaural time difference) according to the direction as well as the size of each individual's own head.

Flood damage modeling based on expert knowledge: Insights from French damage model for agricultural sector

NASA Astrophysics Data System (ADS)

Grelot, Frédéric; Agenais, Anne-Laurence; Brémond, Pauline

2015-04-01

In France, since 2011, it is mandatory for local communities to conduct cost-benefit analysis (CBA) of their flood management projects, to make them eligible for financial support from the State. Meanwhile, as a support, the French Ministry in charge of Environment proposed a methodology to fulfill CBA. Like for many other countries, this methodology is based on the estimation of flood damage. However, existing models to estimate flood damage were judged not convenient for a national-wide use. As a consequence, the French Ministry in charge of Environment launched studies to develop damage models for different sectors, such as: residential sector, public infrastructures, agricultural sector, and commercial and industrial sector. In this presentation, we aim at presenting and discussing methodological choices of those damage models. They all share the same principle: no sufficient data from past events were available to build damage models on a statistical analysis, so modeling was based on expert knowledge. We will focus on the model built for agricultural activities and more precisely for agricultural lands. This model was based on feedback from 30 agricultural experts who experienced floods in their geographical areas. They were selected to have a representative experience of crops and flood conditions in France. The model is composed of: (i) damaging functions, which reveal physiological vulnerability of crops, (ii) action functions, which correspond to farmers' decision rules for carrying on crops after a flood, and (iii) economic agricultural data, which correspond to featured characteristics of crops in the geographical area where the flood management project studied takes place. The two first components are generic and the third one is specific to the area studied. It is, thus, possible to produce flood damage functions adapted to different agronomic and geographical contexts. In the end, the model was applied to obtain a pool of damage functions giving damage in euros by hectare for 14 agricultural lands categories. As a conclusion, we will discuss the validation step of the model. Although the model was validated by experts, we analyse how it could gain insight from comparison with past events.

Flood damage modeling based on expert knowledge: Insights from French damage model for agricultural sector

NASA Astrophysics Data System (ADS)

Grelot, Frédéric; Agenais, Anne-Laurence; Brémond, Pauline

2014-05-01

In France, since 2011, it is mandatory for local communities to conduct cost-benefit analysis (CBA) of their flood management projects, to make them eligible for financial support from the State. Meanwhile, as a support, the French Ministry in charge of Environment proposed a methodology to fulfill CBA. Like for many other countries, this methodology is based on the estimation of flood damage. Howerver, existing models to estimate flood damage were judged not convenient for a national-wide use. As a consequence, the French Ministry in charge of Environment launched studies to develop damage models for different sectors, such as: residential sector, public infrastructures, agricultural sector, and commercial and industrial sector. In this presentation, we aim at presenting and discussing methodological choices of those damage models. They all share the same principle: no sufficient data from past events were available to build damage models on a statistical analysis, so modeling was based on expert knowledge. We will focus on the model built for agricultural activities and more precisely for agricultural lands. This model was based on feedback from 30 agricultural experts who experienced floods in their geographical areas. They were selected to have a representative experience of crops and flood conditions in France. The model is composed of: (i) damaging functions, which reveal physiological vulnerability of crops, (ii) action functions, which correspond to farmers' decision rules for carrying on crops after a flood, and (iii) economic agricultural data, which correspond to featured characteristics of crops in the geographical area where the flood management project studied takes place. The two first components are generic and the third one is specific to the area studied. It is, thus, possible to produce flood damage functions adapted to different agronomic and geographical contexts. In the end, the model was applied to obtain a pool of damage functions giving damage in euros by hectare for 14 agricultural lands categories. As a conclusion, we will discuss the validation step of the model. Although the model was validated by experts, we analyse how it could gain insight from comparison with past events.

Flood loss modelling with FLF-IT: a new flood loss function for Italian residential structures

NASA Astrophysics Data System (ADS)

Hasanzadeh Nafari, Roozbeh; Amadio, Mattia; Ngo, Tuan; Mysiak, Jaroslav

2017-07-01

The damage triggered by different flood events costs the Italian economy millions of euros each year. This cost is likely to increase in the future due to climate variability and economic development. In order to avoid or reduce such significant financial losses, risk management requires tools which can provide a reliable estimate of potential flood impacts across the country. Flood loss functions are an internationally accepted method for estimating physical flood damage in urban areas. In this study, we derived a new flood loss function for Italian residential structures (FLF-IT), on the basis of empirical damage data collected from a recent flood event in the region of Emilia-Romagna. The function was developed based on a new Australian approach (FLFA), which represents the confidence limits that exist around the parameterized functional depth-damage relationship. After model calibration, the performance of the model was validated for the prediction of loss ratios and absolute damage values. It was also contrasted with an uncalibrated relative model with frequent usage in Europe. In this regard, a three-fold cross-validation procedure was carried out over the empirical sample to measure the range of uncertainty from the actual damage data. The predictive capability has also been studied for some sub-classes of water depth. The validation procedure shows that the newly derived function performs well (no bias and only 10 % mean absolute error), especially when the water depth is high. Results of these validation tests illustrate the importance of model calibration. The advantages of the FLF-IT model over other Italian models include calibration with empirical data, consideration of the epistemic uncertainty of data, and the ability to change parameters based on building practices across Italy.

Numerical-graphical method for describing the creep of damaged highly filled polymer materials

NASA Astrophysics Data System (ADS)

Bykov, D. L.; Martynova, E. D.; Mel'nikov, V. P.

2015-09-01

A method for describing the creep behavior until fracture of a highly filled polymer material previously damaged in preliminary tests is proposed. The constitutive relations are the relations of nonlinear endochronic theory of aging viscoelastic materials (NETAVEM) [1]. The numerical-graphical method for identifying the functions occurring in NETAVEM, which was proposed in [2] for describing loading processes at a constant strain rate, is used here for the first time in creep theory. We use the results of experiments with undamaged and preliminary damaged specimens under the action of the same constant tensile loads. The creep kernel is determined in experiments with an undamaged specimen. The reduced time function contained in NETAVEM is determined from the position of points corresponding to the same values of strain on the creep curves of the damaged and undamaged specimens. An integral equation is solved to obtain the aging function, and then the viscosity function is determined. The knowledge of all functions contained in the constitutive relations permits solving the creep problem for products manufactured from a highly filled polymer material.

Defective Cell Cycle Checkpoint Functions in Melanoma Are Associated with Altered Patterns of Gene Expression

PubMed Central

Kaufmann, William K.; Nevis, Kathleen R.; Qu, Pingping; Ibrahim, Joseph G.; Zhou, Tong; Zhou, Yingchun; Simpson, Dennis A.; Helms-Deaton, Jennifer; Cordeiro-Stone, Marila; Moore, Dominic T.; Thomas, Nancy E.; Hao, Honglin; Liu, Zhi; Shields, Janiel M.; Scott, Glynis A.; Sharpless, Norman E.

2009-01-01

Defects in DNA damage responses may underlie genetic instability and malignant progression in melanoma. Cultures of normal human melanocytes (NHMs) and melanoma lines were analyzed to determine whether global patterns of gene expression could predict the efficacy of DNA damage cell cycle checkpoints that arrest growth and suppress genetic instability. NHMs displayed effective G1 and G2 checkpoint responses to ionizing radiation-induced DNA damage. A majority of melanoma cell lines (11/16) displayed significant quantitative defects in one or both checkpoints. Melanomas with B-RAF mutations as a class displayed a significant defect in DNA damage G2 checkpoint function. In contrast the epithelial-like subtype of melanomas with wild-type N-RAS and B-RAF alleles displayed an effective G2 checkpoint but a significant defect in G1 checkpoint function. RNA expression profiling revealed that melanoma lines with defects in the DNA damage G1 checkpoint displayed reduced expression of p53 transcriptional targets, such as CDKN1A and DDB2, and enhanced expression of proliferation-associated genes, such as CDC7 and GEMININ. A Bayesian analysis tool was more accurate than significance analysis of microarrays for predicting checkpoint function using a leave-one-out method. The results suggest that defects in DNA damage checkpoints may be recognized in melanomas through analysis of gene expression. PMID:17597816

Optical monitoring of spinal cord subcellular damage after acute spinal cord injury

NASA Astrophysics Data System (ADS)

Shadgan, Babak; Manouchehri, Neda; So, Kitty; Shortt, Katelyn; Fong, Allan; Streijger, Femke; Macnab, Andrew; Kwon, Brian K.

2018-02-01

Introduction: Sudden physical trauma to the spinal cord results in acute spinal cord injury (SCI), leading to spinal cord (SC) tissue destruction, acute inflammation, increased SC intraparenchymal pressure, and tissue ischemia, hypoxia, and cellular necrosis. The ability to monitor SC tissue viability at subcellular level, using a real-time noninvasive method, would be extremely valuable to clinicians for estimating acute SCI damage, and adjusting and monitoring treatment in the intensive care setting. This study examined the feasibility and sensitivity of a custommade near infrared spectroscopy (NIRS) sensor to monitor the oxidation state of SC mitochondrial cytochrome aa3 (CCO), which reflects the subcellular damage of SC tissue in an animal model of SCI. Methods: Six anesthetized Yorkshire pigs were studied using a custom-made multi-wavelength NIRS system with a miniaturized optical sensor applied directly on the surgically exposed SC at T9. The oxidation states of SC tissue hemoglobin and CCO were monitored before, during and after acute SCI, and during mean arterial pressure alterations. Results: Non-invasive NIRS monitoring reflected changes in SC tissue CCO, simultaneous but independent of changes in hemoglobin saturation following acute SCI. A consistent decrease in SC tissue CCO chromophore concentration (-1.98 +/- 2.1 ab, p<0.05) was observed following SCI, indicating progressive SC cellular damage at the injury site. Elevation of mean arterial pressure can reduce SC tissue damage as suggested by different researchers and observed by significant increase in SC tissue CCO concentration (1.51 +/- 1.7 ab, p<0.05) in this study. Conclusions: This pilot study indicates that a novel miniaturized multi-wave NIRS sensor has the potential to monitor post-SCI changes of SC cytochrome aa3 oxygenation state in real time. Further development of this method may offer new options for improved SCI care.

Pharmacological Activation of the EDA/EDAR Signaling Pathway Restores Salivary Gland Function following Radiation-Induced Damage

PubMed Central

Hill, Grace; Headon, Denis; Harris, Zoey I.; Huttner, Kenneth; Limesand, Kirsten H.

2014-01-01

Radiotherapy of head and neck cancers often results in collateral damage to adjacent salivary glands associated with clinically significant hyposalivation and xerostomia. Due to the reduced capacity of salivary glands to regenerate, hyposalivation is treated by substitution with artificial saliva, rather than through functional restoration of the glands. During embryogenesis, the ectodysplasin/ectodysplasin receptor (EDA/EDAR) signaling pathway is a critical element in the development and growth of salivary glands. We have assessed the effects of pharmacological activation of this pathway in a mouse model of radiation-induced salivary gland dysfunction. We report that post-irradiation administration of an EDAR-agonist monoclonal antibody (mAbEDAR1) normalizes function of radiation damaged adult salivary glands as determined by stimulated salivary flow rates. In addition, salivary gland structure and homeostasis is restored to pre-irradiation levels. These results suggest that transient activation of pathways involved in salivary gland development could facilitate regeneration and restoration of function following damage. PMID:25409170

Real-Time Prognostics of a Rotary Valve Actuator

NASA Technical Reports Server (NTRS)

Daigle, Matthew

2015-01-01

Valves are used in many domains and often have system-critical functions. As such, it is important to monitor the health of valves and their actuators and predict remaining useful life. In this work, we develop a model-based prognostics approach for a rotary valve actuator. Due to limited observability of the component with multiple failure modes, a lumped damage approach is proposed for estimation and prediction of damage progression. In order to support the goal of real-time prognostics, an approach to prediction is developed that does not require online simulation to compute remaining life, rather, a function mapping the damage state to remaining useful life is found offline so that predictions can be made quickly online with a single function evaluation. Simulation results demonstrate the overall methodology, validating the lumped damage approach and demonstrating real-time prognostics.

The Joker: A custom Monte Carlo sampler for binary-star and exoplanet radial velocity data

NASA Astrophysics Data System (ADS)

Price-Whelan, Adrian M.; Hogg, David W.; Foreman-Mackey, Daniel; Rix, Hans-Walter

2017-01-01

Given sparse or low-quality radial-velocity measurements of a star, there are often many qualitatively different stellar or exoplanet companion orbit models that are consistent with the data. The consequent multimodality of the likelihood function leads to extremely challenging search, optimization, and MCMC posterior sampling over the orbital parameters. The Joker is a custom-built Monte Carlo sampler that can produce a posterior sampling for orbital parameters given sparse or noisy radial-velocity measurements, even when the likelihood function is poorly behaved. The method produces correct samplings in orbital parameters for data that include as few as three epochs. The Joker can therefore be used to produce proper samplings of multimodal pdfs, which are still highly informative and can be used in hierarchical (population) modeling.

Effect of cotton bollworm (Helicoverpa armigera Hübner) caused injury on maize grain content, especially regarding to the protein alteration.

PubMed

Keszthelyi, S; Pál-Fám, F; Kerepesi, I

2011-03-01

The cotton bollworm (Helicoverpa armigera Hübner), which migrated in the Carpathian-basin from Mediterraneum in the last decades, is becoming an increasingly serious problem for maize producers in Hungary. In several regions the damage it causes has reached the threshold of economic loss, especially in the case of the sweet maize cultivation. The aim of the research was to determine the changing of ears weights and in-kernel accumulation and alteration in grain as a function of cotton bollworm mastication.Our investigation confirmed that there is an in-kernel and protein pattern change of maize grain by cotton bollworm. Our results proved the significant damaging of each part of ears by cotton bollworm masticating (the average weight loss of ears: 13.99%; the average weight loss of grains: 14.03%; the average weight loss of cobs: 13.74%), with the exception of the increasing of the grain-cob ratio. Our examinations did not prove the water loss - that is the "forced maturing" - caused by the damage. Decreasing of raw fat (control: 2.8%; part-damaged: 2.6%; damaged: 2.4%) and starch content (control: 53.1%; part-damaged: 46.6%; damaged: 44.7%) were registered as a function of injury. In contrast, the raw protein content was increased (control: 4.7%; part-damaged: 5.3%; damaged: 7.4%) by maize ear masticating. The most conspicuous effect on protein composition changing was proved by comparison of damaged grain samples by SDS PAGE. Increased amounts of 114, 50, 46 and 35 kDa molecular mass proteins were detected which explained the more than 50% elevation of raw protein content. The statistical analysis of molecular weights proved the protein realignment as a function of the pest injuries, too.

Enhanced thermomechanical stability on laser-induced damage by functionally graded layers in quasi-rugate filters

NASA Astrophysics Data System (ADS)

Pu, Yunti; Ma, Ping; Lv, Liang; Zhang, Mingxiao; Lu, Zhongwen; Qiao, Zhao; Qiu, Fuming

2018-05-01

Ta2O5-SiO2 quasi-rugate filters with a reasonable optimization of rugate notch filter design were prepared by ion-beam sputtering. The optical properties and laser-induced damage threshold are studied. Compared with the spectrum of HL-stacks, the spectrum of quasi-rugate filters have weaker second harmonic peaks and narrower stopbands. According to the effect of functionally graded layers (FGLs), 1-on-1 and S-on-1 Laser induced damage threshold (LIDT) of quasi-rugate filters are about 22% and 50% higher than those of HL stacks, respectively. Through the analysis of the damage morphologies, laser-induced damage of films under nanosecond multi-pulse are dominated by a combination of thermal shock stress and thermomechanical instability due to nodules. Compared with catastrophic damages, the damage sits of quasi-rugate filters are developed in a moderate way. The damage growth behavior of defect-induced damage sites have been effectively restrained by the structure of FGLs. Generally, FGLs are used to reduce thermal stress by the similar thermal-expansion coefficients of neighboring layers and solve the problems such as instability and cracking raised by the interface discontinuity of nodular boundaries, respectively.

Irradiation induced modest changes in murine cardiac function despite progressive structural damage to the myocardium and microvasculature.

PubMed

Seemann, Ingar; Gabriels, Karen; Visser, Nils L; Hoving, Saske; te Poele, Johannes A; Pol, Jeffrey F; Gijbels, Marion J; Janssen, Ben J; van Leeuwen, Fijs W; Daemen, Mat J; Heeneman, Sylvia; Stewart, Fiona A

2012-05-01

Radiotherapy of thoracic and chest wall tumors increases the long-term risk of cardiotoxicity, but the underlying mechanisms are unclear. Single doses of 2, 8, or 16 Gy were delivered to the hearts of mice and damage was evaluated at 20, 40, and 60 weeks, relative to age matched controls. Single photon emission computed tomography (SPECT/CT) and ultrasound were used to measure cardiac geometry and function, which was related to histo-morphology and microvascular damage. Gated SPECT/CT and ultrasound demonstrated decreases in end diastolic and systolic volumes, while the ejection fraction was increased at 20 and 40 weeks after 2, 8, and 16 Gy. Cardiac blood volume was decreased at 20 and 60 weeks after irradiation. Histological examination revealed inflammatory changes at 20 and 40 weeks after 8 and 16 Gy. Microvascular density in the left ventricle was decreased at 40 and 60 weeks after 8 and 16 Gy, with functional damage to remaining microvasculature manifest as decreased alkaline phosphatase (2, 8, and 16 Gy), increased von Willebrand Factor and albumin leakage from vessels (8 and 16 Gy), and amyloidosis (16 Gy). 16 Gy lead to sudden death between 30 and 40 weeks in 38% of mice. Irradiation with 2 and 8 Gy induced modest changes in murine cardiac function within 20 weeks but this did not deteriorate further, despite progressive structural and microvascular damage. This indicates that heart function can compensate for significant structural damage, although higher doses, eventually lead to sudden death. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

Surface structure and tribology of legless squamate reptiles.

PubMed

Abdel-Aal, Hisham A

2018-03-01

Squamate reptiles (around 10,000 species of snakes and lizards) comprise a myriad of distinct terrestrial vertebrates. The diversity within this biological group offers a great opportunity for customized bio-inspired solutions that address a variety of current technological problems especially within the realm of surface engineering and tribology. One subgroup within squamata is of interest in that context, namely the legless reptiles (mainly snakes and few lizards). The promise of that group lies within their functional adaptation as manifested in optimized surface designs and locomotion that is distinguished by economy of effort even when functioning within hostile tribological environments. Legless reptiles are spread over a wide range in the planet, this geographical diversity demands customized response to local habitats. Customization, in turn, is facilitated through specialized surface design features. In legless reptiles, micro elements of texture, their geometry and topological layout advance mitigation of frictional effects both in locomotion and in general function. Lately, the synergy between functional traits and intrinsic surface features has emerged as focus of research across disciplines. Many investigations have sought to characterize the structural as well as the tribological response of legless species from an engineering point of view. Despite the sizable amount of data that have accumulated in the literature over the past two decades or so, no effort to review the available information, whence this review. This manuscript, therefore, endeavors to assess available data on surface metrology and tribological behavior of legless reptiles and to define aspects of that performance necessary to formulate an advanced paradigm for bio-inspired surface engineering. Copyright © 2017 Elsevier Ltd. All rights reserved.

Transcriptome sequencing and microarray development for the woodrat (Neotoma spp.): custom genetic tools for exploring herbivore ecology.

PubMed

Malenke, J R; Milash, B; Miller, A W; Dearing, M D

2013-07-01

Massively parallel sequencing has enabled the creation of novel, in-depth genetic tools for nonmodel, ecologically important organisms. We present the de novo transcriptome sequencing, analysis and microarray development for a vertebrate herbivore, the woodrat (Neotoma spp.). This genus is of ecological and evolutionary interest, especially with respect to ingestion and hepatic metabolism of potentially toxic plant secondary compounds. We generated a liver transcriptome of the desert woodrat (Neotoma lepida) using the Roche 454 platform. The assembled contigs were well annotated using rodent references (99.7% annotation), and biotransformation function was reflected in the gene ontology. The transcriptome was used to develop a custom microarray (eArray, Agilent). We tested the microarray with three experiments: one across species with similar habitat (thus, dietary) niches, one across species with different habitat niches and one across populations within a species. The resulting one-colour arrays had high technical and biological quality. Probes designed from the woodrat transcriptome performed significantly better than functionally similar probes from the Norway rat (Rattus norvegicus). There were a multitude of expression differences across the woodrat treatments, many of which related to biotransformation processes and activities. The pattern and function of the differences indicate shared ecological pressures, and not merely phylogenetic distance, play an important role in shaping gene expression profiles of woodrat species and populations. The quality and functionality of the woodrat transcriptome and custom microarray suggest these tools will be valuable for expanding the scope of herbivore biology, as well as the exploration of conceptual topics in ecology. © 2013 John Wiley & Sons Ltd.

[Historical roles of salt].

PubMed

Ritz, E; Ritz, C

2004-12-17

Recently increasing evidence has been provided pointing to a close relation of salt consumption to hypertension as well as to target organ damage. It is interesting to note that the discussion concerning salt is unusually emotional. This may be explained, at least in part, by the fact that since ancient times salt had deep symbolic significance, as exemplified, mostly subconsciously, by many customs and expressions still in current use. In the past salt was essential to preserve food. The past importance of salt as a commodity can well be compared with that of oil today. These and further historical aspects of the role of salt are briefly dealt with in this article.

Sustainable business makes dollars and sense.

PubMed Central

Fields, Scott

2002-01-01

The last decade has marked a radical change in the business of sustainability, say environmental activists and industrialists alike. On the wane are "greenwashing" campaigns in which corporations promote dubious environmental accomplishments to draw attention away from environmentally damaging practices. On the rise are corporate investments in sustainability programs, new types of environmental markets, and public demand for green products and investments. Once an afterthought, an annoyance, or a nonentity, sustainability is now often a focal point for businesses. No longer thought of as a business cost, environmentally benign practices are now viewed as a competitive advantage as companies seek to win both stockholders and customers. PMID:11882490

Insurance and indemnification implications of future space projects

NASA Technical Reports Server (NTRS)

O'Brien, John E.

1987-01-01

NASA options regarding insurance and indemnification policies as they relate to NASA customers and contractors are described. The foundation for the discussion is the way in which NASA is planning to return the Space Shuttle fleet to safe flight as well as current U.S. policy concerning future uses of the Shuttle fleet. Issues discussed include: the nature of the Shuttle manifest; the policy regarding property damage or destruction; insurance against liability to third parties; the reduction of the scope of the risk to be insured; NASA as the insurer; a sharing arrangement between the user and NASA; and contractors and subcontractors involved in Shuttle operations.

Sustainable business makes dollars and sense.

PubMed

Fields, Scott

2002-03-01

The last decade has marked a radical change in the business of sustainability, say environmental activists and industrialists alike. On the wane are "greenwashing" campaigns in which corporations promote dubious environmental accomplishments to draw attention away from environmentally damaging practices. On the rise are corporate investments in sustainability programs, new types of environmental markets, and public demand for green products and investments. Once an afterthought, an annoyance, or a nonentity, sustainability is now often a focal point for businesses. No longer thought of as a business cost, environmentally benign practices are now viewed as a competitive advantage as companies seek to win both stockholders and customers.

An Integrated model for Product Quality Development—A case study on Quality functions deployment and AHP based approach

NASA Astrophysics Data System (ADS)

Maitra, Subrata; Banerjee, Debamalya

2010-10-01

Present article is based on application of the product quality and improvement of design related with the nature of failure of machineries and plant operational problems of an industrial blower fan Company. The project aims at developing the product on the basis of standardized production parameters for selling its products in the market. Special attention is also being paid to the blower fans which have been ordered directly by the customer on the basis of installed capacity of air to be provided by the fan. Application of quality function deployment is primarily a customer oriented approach. Proposed model of QFD integrated with AHP to select and rank the decision criterions on the commercial and technical factors and the measurement of the decision parameters for selection of best product in the compettitive environment. The present AHP-QFD model justifies the selection of a blower fan with the help of the group of experts' opinion by pairwise comparison of the customer's and ergonomy based technical design requirements. The steps invoved in implementation of the QFD—AHP and selection of weighted criterion may be helpful for all similar purpose industries maintaining cost and utility for competitive product.

The Cell's Sophisticated Army to Defend Against Assaults on DNAThe Cell's Sophisticated Army to Defend Against Assaults on DNA | Center for Cancer Research

Cancer.gov

The maintenance of genome integrity and function is essen-tial for the survival of cells and organisms. Any damage to our genetic material must be immediately sensed and repaired to preserve a cell’s func-tional integrity. Cells are constantly faced with the challenge of protecting their DNA from assaults by damaging chemicals and ultraviolet light. DNA damage that escapes repair can lead to a variety of genetic disorders and diseases, particularly cancer. To avoid this catastrophe, the cell employs an army of DNA repair factors that “rush to the scene” and initiate a cascade of events to repair the damage. Exactly how different repair factors sense DNA damage and orchestrate their concert-ed response is not well understood.

ARCADIA{sup R} - A New Generation of Coupled Neutronics / Core Thermal- Hydraulics Code System at AREVA NP

DOE Office of Scientific and Technical Information (OSTI.GOV)

Curca-Tivig, Florin; Merk, Stephan; Pautz, Andreas

2007-07-01

Anticipating future needs of our customers and willing to concentrate synergies and competences existing in the company for the benefit of our customers, AREVA NP decided in 2002 to develop the next generation of coupled neutronics/ core thermal-hydraulic (TH) code systems for fuel assembly and core design calculations for both, PWR and BWR applications. The global CONVERGENCE project was born: after a feasibility study of one year (2002) and a conceptual phase of another year (2003), development was started at the beginning of 2004. The present paper introduces the CONVERGENCE project, presents the main feature of the new code systemmore » ARCADIA{sup R} and concludes on customer benefits. ARCADIA{sup R} is designed to meet AREVA NP market and customers' requirements worldwide. Besides state-of-the-art physical modeling, numerical performance and industrial functionality, the ARCADIA{sup R} system is featuring state-of-the-art software engineering. The new code system will bring a series of benefits for our customers: e.g. improved accuracy for heterogeneous cores (MOX/ UOX, Gd...), better description of nuclide chains, and access to local neutronics/ thermal-hydraulics and possibly thermal-mechanical information (3D pin by pin full core modeling). ARCADIA is a registered trademark of AREVA NP. (authors)« less

Smart customers, dumb companies.

PubMed

Locke, C

2000-01-01

Customers today are being bombarded with an overwhelming array of choices. To alleviate customer frustration, say Steven Cristol and Peter Sealey in Simplicity Marketing, companies should stop creating new brands and product extensions. Better to consolidate product and service functions by following a four R approach: replace, repackage, reposition, and replenish. That's an outmoded, dictatorial view of markets, says Christopher Locke. Far from being stymied by choices, customers are rapidly becoming smarter than the companies that pretend to serve them. In this networked economy, people are talking among themselves, and that changes everything. Locke predicts we'll see a growing number of well-defined micromarkets--groups of customers converging in real time around entertaining and knowledgeable voices--such as NPR's car guys and the Motley Fool investment site. "Micromedia" Web sites will replace traditional advertising because they'll provide credible user-supplied news about products and services. Locke contends that an open exchange of information solves the "problem" of choice much better than manipulative strategies like simplicity or even permission marketing. Companies can participate in micromarkets through what Locke dubs "gonzo marketing." If Ford, for example, discovers that a subset of its employees are organic gardeners, it may offer support to a big independent organic-gardening Web site with donations and employee volunteers. This marketing effort would be driven not by advertising managers but by people with genuine interest in each micromarket, so it would have credibility with customers. With gonzo marketing, both companies and their markets will benefit.

Improving the trajectory of transpedicular transdiscal lumbar screw fixation with a computer-assisted 3D-printed custom drill guide

PubMed Central

Shao, Zhen-Xuan; Wang, Jian-Shun; Lin, Zhong-Ke; Ni, Wen-Fei; Wang, Xiang-Yang

2017-01-01

Transpedicular transdiscal screw fixation is an alternative technique used in lumbar spine fixation; however, it requires an accurate screw trajectory. The aim of this study is to design a novel 3D-printed custom drill guide and investigate its accuracy to guide the trajectory of transpedicular transdiscal (TPTD) lumbar screw fixation. Dicom images of thirty lumbar functional segment units (FSU, two segments) of L1–L4 were acquired from the PACS system in our hospital (patients who underwent a CT scan for other abdomen diseases and had normal spine anatomy) and imported into reverse design software for three-dimensional reconstructions. Images were used to print the 3D lumbar models and were imported into CAD software to design an optimal TPTD screw trajectory and a matched custom drill guide. After both the 3D printed FSU models and 3D-printed custom drill guide were prepared, the TPTD screws will be guided with a 3D-printed custom drill guide and introduced into the 3D printed FSU models. No significant statistical difference in screw trajectory angles was observed between the digital model and the 3D-printed model (P > 0.05). Our present study found that, with the help of CAD software, it is feasible to design a TPTD screw custom drill guide that could guide the accurate TPTD screw trajectory on 3D-printed lumbar models. PMID:28717599

Advanced instrumentation for acousto-ultrasonic based structural health monitoring

NASA Astrophysics Data System (ADS)

Smithard, Joel; Galea, Steve; van der Velden, Stephen; Powlesland, Ian; Jung, George; Rajic, Nik

2016-04-01

Structural health monitoring (SHM) systems using structurally-integrated sensors potentially allow the ability to inspect for damage in aircraft structures on-demand and could provide a basis for the development of condition-based maintenance approaches for airframes. These systems potentially offer both substantial cost savings and performance improvements over conventional nondestructive inspection (NDI). Acousto-ultrasonics (AU), using structurallyintegrated piezoelectric transducers, offers a promising basis for broad-field damage detection in aircraft structures. For these systems to be successfully applied in the field the hardware for AU excitation and interrogation needs to be easy to use, compact, portable, light and, electrically and mechanically robust. Highly flexible and inexpensive instrumentation for basic background laboratory investigations is also required to allow researchers to tackle the numerous scientific and engineering issues associated with AU based SHM. The Australian Defence Science and Technology Group (DST Group) has developed the Acousto Ultrasonic Structural health monitoring Array Module (AUSAM+), a compact device for AU excitation and interrogation. The module, which has the footprint of a typical current generation smart phone, provides autonomous control of four send and receive piezoelectric elements, which can operate in pitch-catch or pulse-echo modes and can undertake electro-mechanical impedance measurements for transducer and structural diagnostics. Modules are designed to operate synchronously with other units, via an optical link, to accommodate larger transducer arrays. The module also caters for fibre optic sensing of acoustic waves with four intensity-based optical inputs. Temperature and electrical resistance strain gauge inputs as well as external triggering functionality are also provided. The development of a Matlab hardware object allows users to easily access the full hardware functionality of the device and provides enormous flexibility for the creation of custom interfaces. This paper discusses the impetus for the concept, and outlines key aspects of the hardware design and the module capabilities. The efficacy of the system is demonstrated through the results of first-of-class testing, as well as laboratory AU studies on a flat plate using an array of piezoelectric elements.

DIY 3D printing of custom orthopaedic implants: a proof of concept study.

PubMed

Frame, Mark; Leach, William

2014-03-01

3D printing is an emerging technology that is primarily used for aiding the design and prototyping of implants. As this technology has evolved it has now become possible to produce functional and definitive implants manufactured using a 3D printing process. This process, however, previously required a large financial investment in complex machinery and professionals skilled in 3D product design. Our pilot study's aim was to design and create a 3D printed custom orthopaedic implant using only freely available consumer hardware and software.

DSpace and customized controlled vocabularies

NASA Astrophysics Data System (ADS)

Skourlas, C.; Tsolakidis, A.; Kakoulidis, P.; Giannakopoulos, G.

2015-02-01

The open source platform of DSpace could be defined as a repository application used to provide access to digital resources. DSpace is installed and used by more than 1000 organizations worldwide. A predefined taxonomy of keyword, called the Controlled Vocabulary, can be used for describing and accessing the information items stored in the repository. In this paper, we describe how the users can create, and customize their own vocabularies. Various heterogeneous items, such as research papers, videos, articles and educational material of the repository, can be indexed in order to provide advanced search functionality using new controlled vocabularies.

Energy Systems Integration: NREL + HECO

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hawaiian Electric Companies' (HECO) customers are among the nation's fastest-adopters of solar PV systems. For HECO, the increased daytime PV generation raises feeder voltage profiles. Emerging technologies such as advanced PV inverters, battery storage, electric vehicles, and controllable loads also have an impact on voltage profiles. From the utility's perspective, it is yet unclear how to effectively manage these customer-sited resources. NREL is helping HECO understand its options by validating several voltage regulation strategies, making specific use of advanced inverters with voltage support functions, and their integration with other controllable sources.

Murine cell glycolipids customization by modular expression of glycosyltransferases.

PubMed

Cid, Emili; Yamamoto, Miyako; Buschbeck, Marcus; Yamamoto, Fumiichiro

2013-01-01

Functional analysis of glycolipids has been hampered by their complex nature and combinatorial expression in cells and tissues. We report an efficient and easy method to generate cells with specific glycolipids. In our proof of principle experiments we have demonstrated the customized expression of two relevant glycosphingolipids on murine fibroblasts, stage-specific embryonic antigen 3 (SSEA-3), a marker for stem cells, and Forssman glycolipid, a xenoantigen. Sets of genes encoding glycosyltansferases were transduced by viral infection followed by multi-color cell sorting based on coupled expression of fluorescent proteins.

The effects of whole ovarian perfusion and cryopreservation on endothelial cell-related gene expression in the ovarian medulla and pedicle.

PubMed

Onions, V J; Webb, R; Pincott-Allen, C; Picton, H M; Campbell, B K

2013-04-01

Fertility preservation by whole ovarian cryopreservation requires successful cryopreservation of both the ovary and its vascular supply. Previous work has indicated detrimental effects of both perfusion and cryopreservation on the ovarian vasculature. This study assessed the effects of blood perfusion, alone or in combination with cryopreservation, on functional effects in the follicle population and ovarian function in vivo following short-term autotransplantation of the tissue after vascular reanastomosis and measured acute changes in endothelial cell-related gene expression within the ovarian medulla and pedicle. Following autotransplantation for 7 days, primordial, transitional and primary follicle densities were significantly reduced (P < 0.05) and stromal Ki67 and caspase-3 expression significantly increased (P < 0.05) in cryopreserved but not fresh or perfused whole ovaries. There was evidence of clot formation and fluorescent microsphere (FMS) extravasation in the medulla of all cryopreserved ovaries, indicating vascular damage. Utilizing a customized RT-PCR array or conventional RT-PCR, we found that perfusion alone resulted in down-regulation in the expression of caspase 6 and thrombospondin 1 (THBS1) genes in the medulla. Following additional cryopreservation, endothelial nitric oxide synthase (eNOS), endothelin 1, endothelin receptor A and Bcl-2 expression were significantly (P < 0.05) down-regulated. In the pedicle, both perfusion and cryopreservation caused a (P < 0.05) down-regulation of eNOS and THBS1, and an up-regulation in Bax expression. Perfusion also caused a down-regulation of TNF and up-regulation of endothelin-2 expression (P < 0.05). In conclusion, this study has identified a number of endothelial cell-related genes expressed in the medulla which are acutely affected by both cryopreservation and perfusion, supporting the hypothesis that both interventions have deleterious effects on endothelial cell function.

Computer-assisted template-guided custom-designed 3D-printed implant placement with custom-designed 3D-printed surgical tooling: an in-vitro proof of a novel concept.

PubMed

Anssari Moin, David; Derksen, Wiebe; Waars, Hugo; Hassan, Bassam; Wismeijer, Daniel

2017-05-01

The aim of this study was to introduce a new concept for computer-assisted template-guided placement of a custom 3D-designed/3D-printed implant with congruent custom 3D-designed/3D-printed surgical tooling and to test the feasibility and accuracy of this method in-vitro. One partially edentulous human mandibular cadaver was scanned with a cone-beam computed tomography (CBCT) system and intra-oral scan system. The 3D data of this cadaver were imported in specialized software and used to analyse the region of a missing tooth. Based on the functional and anatomical parameters, an individual implant with congruent surgical tooling and surgical guided template was designed and 3D-printed. The guided osteotomy was performed, and the custom implant inserted. To evaluate the planned implant position in comparison with the placed implant position, the mandible with implant was scanned again with the CBCT system and software matching was applied to measure the accuracy of the procedure. The angular deflection with the planned implant position was 0.40°. When comparing the 3D positions of the shoulder, there is a deviation of 0.72 mm resulting in an apical deviation of 0.72 mm. With the use of currently available technology, it is very well feasible to create in a virtual simulation a custom implant with congruent custom surgical tooling and to transfer this to a clinical setting. However, further research on multiple levels is needed to explore this novel approach. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

The ultimately accountable job: leading today's sales organization.

PubMed

Colletti, Jerome A; Fiss, Mary S

2006-01-01

In recent years, sales leaders have had to devote considerable time and energy to establishing and maintaining disciplined processes. The thing is, many of them stop there--and they can't afford to, because the business environment has changed. Customers have gained power and gone global, channels have proliferated, more product companies are selling services, and many suppliers have begun providing a single point of contact for customers. Such changes require today's sales leaders to fill various new roles: Company leader. The best sales chiefs actively help formulate and execute company strategy, and they collaborate with all functions of the business to deliver value to customers. Customer champion. Customers want C-level relationships with suppliers in order to understand product strategy, look at offerings in advance, and participate in decisions made about future products--and sales leaders are in the best position to offer that kind of contact. Process guru. Although sales chiefs must look beyond the sales and customer processes they have honed over the past decade, they can't abandon them. The focus on process has become only more important as many organizations have begun bundling products and services to meet important customers' individual needs. Organization architect. Good sales leaders spend a lot of time evaluating and occasionally redesigning the sales organization's structure to ensure that it supports corporate strategy. Often, this involves finding the right balance between specialized and generalized sales roles. Course corrector. Sales leaders must watch the horizon, but they can't take their hands off the levers or forget about the dials. If they do, they might fail to respond when quick adjustments in priorities are needed.

Fault Diagnosis of Demountable Disk-Drum Aero-Engine Rotor Using Customized Multiwavelet Method.

PubMed

Chen, Jinglong; Wang, Yu; He, Zhengjia; Wang, Xiaodong

2015-10-23

The demountable disk-drum aero-engine rotor is an important piece of equipment that greatly impacts the safe operation of aircraft. However, assembly looseness or crack fault has led to several unscheduled breakdowns and serious accidents. Thus, condition monitoring and fault diagnosis technique are required for identifying abnormal conditions. Customized ensemble multiwavelet method for aero-engine rotor condition identification, using measured vibration data, is developed in this paper. First, customized multiwavelet basis function with strong adaptivity is constructed via symmetric multiwavelet lifting scheme. Then vibration signal is processed by customized ensemble multiwavelet transform. Next, normalized information entropy of multiwavelet decomposition coefficients is computed to directly reflect and evaluate the condition. The proposed approach is first applied to fault detection of an experimental aero-engine rotor. Finally, the proposed approach is used in an engineering application, where it successfully identified the crack fault of a demountable disk-drum aero-engine rotor. The results show that the proposed method possesses excellent performance in fault detection of aero-engine rotor. Moreover, the robustness of the multiwavelet method against noise is also tested and verified by simulation and field experiments.

[Surgical treatment with an artificial iris].

PubMed

Mayer, C S; Hoffmann, A E

2015-10-01

Iris defects with their disturbed pupillary function, visual impairment and glare constitute a therapeutic challenge in surgical reconstruction. A new therapeutic option for distinctive defects consists in the implantation of a custom-made silicone iris. This new and challenging therapy provides the opportunity to achieve an individual, aesthetically appealing and good functional result for the patient.

The QCDOC Project

NASA Astrophysics Data System (ADS)

Boyle, P.; Chen, D.; Christ, N.; Clark, M.; Cohen, S.; Cristian, C.; Dong, Z.; Gara, A.; Joo, B.; Jung, C.; Kim, C.; Levkova, L.; Liao, X.; Liu, G.; Li, S.; Lin, H.; Mawhinney, R.; Ohta, S.; Petrov, K.; Wettig, T.; Yamaguchi, A.

2005-03-01

The QCDOC project has developed a supercomputer optimised for the needs of Lattice QCD simulations. It provides a very competitive price to sustained performance ratio of around $1 USD per sustained Megaflop/s in combination with outstanding scalability. Thus very large systems delivering over 5 TFlop/s of performance on the evolution of a single lattice is possible. Large prototypes have been built and are functioning correctly. The software environment raises the state of the art in such custom supercomputers. It is based on a lean custom node operating system that eliminates many unnecessary overheads that plague other systems. Despite the custom nature, the operating system implements a standards compliant UNIX-like programming environment easing the porting of software from other systems. The SciDAC QMP interface adds internode communication in a fashion that provides a uniform cross-platform programming environment.

Comparison of positive pressure gloves on hand function in adults with burns.

PubMed

O'Brien, Kimberly A; Weinstock-Zlotnick, Gwen; Hunter, Hope; Yurt, Roger W

2006-01-01

The purpose of this study was to analyze the impact of a standard, custom-made pressure glove vs The NewYork-Presbyterian Dexterity Glove (NYPDG) with silon application on the palmer surface on functional hand use of burn survivors. A standard, custom-made pressure glove and NYPDG were given to 18 participants in a randomized order. Subjects wore each glove for 7 to 10 days during all activities of daily living (ADL). Variables such as hand function, difficulty of fine and gross motor ADL, and participant glove preference were assessed with each glove condition. Data collection of the second glove took place 7 to 10 days later incorporating a quasiexperimental, repeated measure design. A crossover design was used to analyze the data. The NYPDG demonstrated significantly better results in all of the four outcome categories measured: time to complete the Jebsen, the Jebsen Likert scale, fine motor ADL, and gross motor ADL. This study demonstrated that functional tasks took less time to complete and were more easily performed when using the NYPDG.

Effects of methyl and inorganic mercury exposure on genome homeostasis and mitochondrial function in Caenorhabditis elegans.

PubMed

Wyatt, Lauren H; Luz, Anthony L; Cao, Xiou; Maurer, Laura L; Blawas, Ashley M; Aballay, Alejandro; Pan, William K Y; Meyer, Joel N

2017-04-01

Mercury toxicity mechanisms have the potential to induce DNA damage and disrupt cellular processes, like mitochondrial function. Proper mitochondrial function is important for cellular bioenergetics and immune signaling and function. Reported impacts of mercury on the nuclear genome (nDNA) are conflicting and inconclusive, and mitochondrial DNA (mtDNA) impacts are relatively unknown. In this study, we assessed genotoxic (mtDNA and nDNA), metabolic, and innate immune impacts of inorganic and organic mercury exposure in Caenorhabditis elegans. Genotoxic outcomes measured included DNA damage, DNA damage repair (nucleotide excision repair, NER; base excision repair, BER), and genomic copy number following MeHg and HgCl 2 exposure alone and in combination with known DNA damage-inducing agents ultraviolet C radiation (UVC) and hydrogen peroxide (H 2 O 2 ), which cause bulky DNA lesions and oxidative DNA damage, respectively. Following exposure to both MeHg and HgCl 2 , low-level DNA damage (∼0.25 lesions/10kb mtDNA and nDNA) was observed. Unexpectedly, a higher MeHg concentration reduced damage in both genomes compared to controls. However, this observation was likely the result of developmental delay. In co-exposure treatments, both mercury compounds increased initial DNA damage (mtDNA and nDNA) in combination with H 2 O 2 exposure, but had no impact in combination with UVC exposure. Mercury exposure both increased and decreased DNA damage removal via BER. DNA repair after H 2 O 2 exposure in mercury-exposed nematodes resulted in damage levels lower than measured in controls. Impacts to NER were not detected. mtDNA copy number was significantly decreased in the MeHg-UVC and MeHg-H 2 O 2 co-exposure treatments. Mercury exposure had metabolic impacts (steady-state ATP levels) that differed between the compounds; HgCl 2 exposure decreased these levels, while MeHg slightly increased levels or had no impact. Both mercury species reduced mRNA levels for immune signaling-related genes, but had mild or no effects on survival on pathogenic bacteria. Overall, mercury exposure disrupted mitochondrial endpoints in a mercury-compound dependent fashion. Copyright © 2017 Elsevier B.V. All rights reserved.

Effects of methyl and inorganic mercury exposure on genome homeostasis and mitochondrial function in Caenorhabditis elegans

PubMed Central

Wyatt, Lauren H.; Luz, Anthony L.; Cao, Xiou; Maurer, Laura L.; Blawas, Ashley M.; Aballay, Alejandro; Pan, William K.; Meyer, Joel N.

2017-01-01

Mercury toxicity mechanisms have the potential to induce DNA damage and disrupt cellular processes, like mitochondrial function. Proper mitochondrial function is important for cellular bioenergetics and immune signaling and function. Impacts of mercury on the nuclear genome (nDNA) are conflicting and inconclusive, and mitochondrial DNA (mtDNA) impacts are relatively unknown. In this study, we assessed genotoxic (mtDNA and nDNA), metabolic, and innate immune impacts of inorganic and organic mercury exposure in Caenorhabditis elegans. Genotoxic outcomes measured included DNA damage, DNA damage repair (nucleotide excision repair, NER; base excision repair, BER), and genomic copy number following MeHg and HgCl2 exposure alone and in combination with known DNA damage-inducing agents ultraviolet C radiation (UVC) and hydrogen peroxide (H2O2), which cause bulky DNA lesions and oxidative DNA damage, respectively. Following exposure to both MeHg and HgCl2, low-level DNA damage (~0.25 lesions/10 kb mtDNA and nDNA) was observed. Unexpectedly, a higher MeHg concentration reduced damage in both genomes compared to controls. However, this observation was likely the result of developmental delay. In co-exposure treatments, both mercury compounds increased initial DNA damage (mtDNA and nDNA) in combination with H2O2 exposure, but had no impact in combination with UVC exposure. Mercury exposure both increased and decreased DNA damage removal via BER. DNA repair after H2O2 exposure in mercury-exposed nematodes resulted in damage levels lower than measured in controls. Impacts to NER were not detected. mtDNA copy number was significantly decreased in the MeHg-UVC and MeHg-H2O2 co-exposure treatments. Mercury exposure had metabolic impacts (steady-state ATP levels) that differed between the compounds; HgCl2 exposure decreased these levels, while MeHg slightly increased levels or had no impact. Both mercury species reduced mRNA levels for immune signaling-related genes, but had mild or no effects on survival on pathogenic bacteria. Overall, mercury exposure disrupted mitochondrial endpoints in a mercury-compound dependent fashion. PMID:28242054

Impact of Clinically Relevant Elliptical Deformations on the Damage Patterns of Sagging and Stretched Leaflets in a Bioprosthetic Heart Valve.

PubMed

Sritharan, Deepa; Fathi, Parinaz; Weaver, Jason D; Retta, Stephen M; Wu, Changfu; Duraiswamy, Nandini

2018-06-12

After implantation of a transcatheter bioprosthetic heart valve its original circular circumference may become distorted, which can lead to changes in leaflet coaptation and leaflets that are stretched or sagging. This may lead to early structural deterioration of the valve as seen in some explanted transcatheter heart valves. Our in vitro study evaluates the effect of leaflet deformations seen in elliptical configurations on the damage patterns of the leaflets, with circular valve deformation as the control. Bovine pericardial tissue heart valves were subjected to accelerated wear testing under both circular (N = 2) and elliptical (N = 4) configurations. The elliptical configurations were created by placing the valve inside custom-made elliptical holders, which caused the leaflets to sag or stretch. The hydrodynamic performance of the valves was monitored and high resolution images were acquired to evaluate leaflet damage patterns over time. In the elliptically deformed valves, sagging leaflets experienced more damage from wear compared to stretched leaflets; the undistorted leaflets of the circular valves experienced the least leaflet damage. Free-edge thinning and tearing were the primary modes of damage in the sagging leaflets. Belly region thinning was seen in the undistorted and stretched leaflets. Leaflet and fabric tears at the commissures were seen in all valve configurations. Free-edge tearing and commissure tears were the leading cause of valve hydrodynamic incompetence. Our study shows that mechanical wear affects heart valve pericardial leaflets differently based on whether they are undistorted, stretched, or sagging in a valve configuration. Sagging leaflets are more likely to be subjected to free-edge tear than stretched or undistorted leaflets. Reducing leaflet stress at the free edge of non-circular valve configurations should be an important factor to consider in the design and/or deployment of transcatheter bioprosthetic heart valves to improve their long-term performance.

The relationship between theory of mind and the executive functions: Evidence from patients with frontal lobe damage.

PubMed

Yeh, Zai-Ting; Tsai, Ming-Cheng; Tsai, Ming-Dar; Lo, Chiao-Yu; Wang, Kaw-Chen

2017-01-01

"Theory of mind" (ToM) refers to the ability to predict others' thoughts, intentions, beliefs, and feelings. Evidence from neuropsychology and functional imaging indicates that ToM is a domain-specific or modular architecture; however, research in development psychology has suggested that ToM is the full development of the executive functions in individuals. Therefore, the relationship between ToM and the executive functions needs to be clarified. Since the frontal lobe plays a critical role in the abilities of ToM and the executive functions, patients with frontal lobe damage were recruited for the present study. Assessments of ToM and the executive functions were performed on 23 patients with frontal lobe damage and 20 healthy controls. When controlling for the executive functions, significant differences between the patient and normal groups were found in the affective component of ToM, but not in the cognitive component. The present study suggests that in various social situations, executing ToM abilities requires logical reasoning processes provided by the executive functions. However, the reasoning processes of affective ToM are independent of executive functions.

Foveal damage in habitual poppers users.

PubMed

Audo, Isabelle; El Sanharawi, Mohamed; Vignal-Clermont, Catherine; Villa, Antoine; Morin, Annie; Conrath, John; Fompeydie, Dominique; Sahel, José-Alain; Gocho-Nakashima, Kiyoko; Goureau, Olivier; Paques, Michel

2011-06-01

To describe foveal damage in habitual use of poppers, a popular recreational drug. Retrospective observational case series. Six patients with bilateral vision loss after chronic popper inhalation were seen in 4 university-based ophthalmology departments. Symptoms, medical history, ophthalmic examination, and functional and morphological tests are described. All patients experienced progressive bilateral vision loss, with central photopsia in 2 cases. Initial visual acuities ranged from 20/50 to 20/25. In all patients, a bilateral yellow foveal spot was present that, by optical coherence tomography, was associated with disruption of the outer segments of foveal cones. Functional and anatomical damage was restricted to the fovea. The poppers involved were identified as isopropyl nitrite in 3 cases. Four patients showed anatomical and/or functional improvement over several months after discontinuing popper inhalation. Repeated inhalation of poppers may be associated with prolonged bilateral vision loss due to the disruption of foveal cone outer segments. Retinal damage may progressively improve following drug discontinuation.

Bread dough rheology: Computing with a damage function model

NASA Astrophysics Data System (ADS)

Tanner, Roger I.; Qi, Fuzhong; Dai, Shaocong

2015-01-01

We describe an improved damage function model for bread dough rheology. The model has relatively few parameters, all of which can easily be found from simple experiments. Small deformations in the linear region are described by a gel-like power-law memory function. A set of large non-reversing deformations - stress relaxation after a step of shear, steady shearing and elongation beginning from rest, and biaxial stretching, is used to test the model. With the introduction of a revised strain measure which includes a Mooney-Rivlin term, all of these motions can be well described by the damage function described in previous papers. For reversing step strains, larger amplitude oscillatory shearing and recoil reasonable predictions have been found. The numerical methods used are discussed and we give some examples.

Economics of social trade-off: Balancing wastewater treatment cost and ecosystem damage.

PubMed

Jiang, Yu; Dinar, Ariel; Hellegers, Petra

2018-04-01

We have developed a social optimization model that integrates the financial and ecological costs associated with wastewater treatment and ecosystem damage. The social optimal abatement level of water pollution is determined by finding the trade-off between the cost of pollution control and its resulting ecosystem damage. The model is applied to data from the Lake Taihu region in China to demonstrate this trade-off. A wastewater treatment cost function is estimated with a sizable sample from China, and an ecological damage cost function is estimated following an ecosystem service valuation framework. Results show that the wastewater treatment cost function has economies of scale in facility capacity, and diseconomies in pollutant removal efficiency. Results also show that a low value of the ecosystem service will lead to serious ecological damage. One important policy implication is that the assimilative capacity of the lake should be enhanced by forbidding over extraction of water from the lake. It is also suggested that more work should be done to improve the accuracy of the economic valuation. Copyright © 2018 Elsevier Ltd. All rights reserved.

Temporary Shell Proof-of-Concept Technique: Digital-Assisted Workflow to Enable Customized Immediate Function in Two Visits in Partially Edentulous Patients

PubMed

Pozzi, Alessandro; Arcuri, Lorenzo; Moy, Peter K

2018-03-01

The growing interest in minimally invasive implant placement and delivery of a prefabricated provisional prosthesis immediately, thus minimizing "time to teeth," has led to the development of numerous 3-dimensional (3D) planning software programs. Given the enhancements associated with fully digital workflows, such as better 3D soft-tissue visualization and virtual tooth rendering, computer-guided implant surgery and immediate function has become an effective and reliable procedure. This article describes how modern implant planning software programs provide a comprehensive digital platform that enables efficient interplay between the surgical and restorative aspects of implant treatment. These new technologies that streamline the overall digital workflow allow transformation of the digital wax-up into a personalized, CAD/CAM-milled provisional restoration. Thus, collaborative digital workflows provide a novel approach for time-efficient delivery of a customized, screw-retained provisional restoration on the day of implant surgery, resulting in improved predictability for immediate function in the partially edentate patient.

Development and evaluation of an electronic health record configuration and customization laboratory course for clinical informatics students.

PubMed

Mohan, Vishnu; Hersh, William R

2013-01-01

There is a need for informatics educational programs to develop laboratory courses that facilitate hands-on access to an EHR, and allow students to learn and evaluate functionality and configuration options. This is particularly relevant given the diversity of backgrounds of informatics students. We implemented an EHR laboratory course that allowed students to explore an EHR in both inpatient and outpatient clinical environments. The course focused on specific elements of the EHR including order set development, customization, clinical decision support, ancillary services, and billing and coding functionality. Students were surveyed at the end of the course for their satisfaction with the learning experience. We detailed challenges as well as lessons learned after analyzing student evaluations of this course. Features that promote the successful offering of an online EHR course, include (1) using more than one EHR to allow students to compare functionalities, (2) ensuring appropriate course calibration, (3) countering issues specific to EHR usability, and (4) fostering a fertile environment for rich online conversations are discussed.

Opportunities of probabilistic flood loss models

NASA Astrophysics Data System (ADS)

Schröter, Kai; Kreibich, Heidi; Lüdtke, Stefan; Vogel, Kristin; Merz, Bruno

2016-04-01

Oftentimes, traditional uni-variate damage models as for instance depth-damage curves fail to reproduce the variability of observed flood damage. However, reliable flood damage models are a prerequisite for the practical usefulness of the model results. Innovative multi-variate probabilistic modelling approaches are promising to capture and quantify the uncertainty involved and thus to improve the basis for decision making. In this study we compare the predictive capability of two probabilistic modelling approaches, namely Bagging Decision Trees and Bayesian Networks and traditional stage damage functions. For model evaluation we use empirical damage data which are available from computer aided telephone interviews that were respectively compiled after the floods in 2002, 2005, 2006 and 2013 in the Elbe and Danube catchments in Germany. We carry out a split sample test by sub-setting the damage records. One sub-set is used to derive the models and the remaining records are used to evaluate the predictive performance of the model. Further we stratify the sample according to catchments which allows studying model performance in a spatial transfer context. Flood damage estimation is carried out on the scale of the individual buildings in terms of relative damage. The predictive performance of the models is assessed in terms of systematic deviations (mean bias), precision (mean absolute error) as well as in terms of sharpness of the predictions the reliability which is represented by the proportion of the number of observations that fall within the 95-quantile and 5-quantile predictive interval. The comparison of the uni-variable Stage damage function and the multivariable model approach emphasises the importance to quantify predictive uncertainty. With each explanatory variable, the multi-variable model reveals an additional source of uncertainty. However, the predictive performance in terms of precision (mbe), accuracy (mae) and reliability (HR) is clearly improved in comparison to uni-variable Stage damage function. Overall, Probabilistic models provide quantitative information about prediction uncertainty which is crucial to assess the reliability of model predictions and improves the usefulness of model results.

Incorporation of Damage and Failure into an Orthotropic Elasto-Plastic Three-Dimensional Model with Tabulated Input Suitable for Use in Composite Impact Problems

NASA Technical Reports Server (NTRS)

Goldberg, Robert K.; Carney, Kelly S.; Dubois, Paul; Hoffarth, Canio; Khaled, Bilal; Rajan, Subramaniam; Blankenhorn, Gunther

2016-01-01

A material model which incorporates several key capabilities which have been identified by the aerospace community as lacking in the composite impact models currently available in LS-DYNA(Registered Trademark) is under development. In particular, the material model, which is being implemented as MAT 213 into a tailored version of LS-DYNA being jointly developed by the FAA and NASA, incorporates both plasticity and damage within the material model, utilizes experimentally based tabulated input to define the evolution of plasticity and damage as opposed to specifying discrete input parameters (such as modulus and strength), and is able to analyze the response of composites composed with a variety of fiber architectures. The plasticity portion of the orthotropic, three-dimensional, macroscopic composite constitutive model is based on an extension of the Tsai-Wu composite failure model into a generalized yield function with a non-associative flow rule. The capability to account for the rate and temperature dependent deformation response of composites has also been incorporated into the material model. For the damage model, a strain equivalent formulation is utilized to allow for the uncoupling of the deformation and damage analyses. In the damage model, a diagonal damage tensor is defined to account for the directionally dependent variation of damage. However, in composites it has been found that loading in one direction can lead to damage in multiple coordinate directions. To account for this phenomena, the terms in the damage matrix are semi-coupled such that the damage in a particular coordinate direction is a function of the stresses and plastic strains in all of the coordinate directions. The onset of material failure, and thus element deletion, is being developed to be a function of the stresses and plastic strains in the various coordinate directions. Systematic procedures are being developed to generate the required input parameters based on the results of experimental tests.

Mediodorsal thalamus and cognition in non-human primates

PubMed Central

Baxter, Mark G.

2013-01-01

Several recent studies in non-human primates have provided new insights into the role of the medial thalamus in different aspects of cognitive function. The mediodorsal nucleus of the thalamus (MD), by virtue of its connectivity with the frontal cortex, has been implicated in an array of cognitive functions. Rather than serving as an engine or relay for the prefrontal cortex, this area seems to be more specifically involved in regulating plasticity and flexibility of prefrontal-dependent cognitive functions. Focal damage to MD may also exacerbate the effects of damage to other subcortical relays. Thus, a wide range of distributed circuits and cognitive functions may be disrupted from focal damage within the medial thalamus (for example as a consequence of stroke or brain injury). Conversely, this region may make an interesting target for neuromodulation of cognitive function via deep brain stimulation or related methods, in conditions associated with dysfunction of these neural circuits. PMID:23964206

Mediodorsal thalamus and cognition in non-human primates.

PubMed

Baxter, Mark G

2013-01-01

Several recent studies in non-human primates have provided new insights into the role of the medial thalamus in different aspects of cognitive function. The mediodorsal nucleus of the thalamus (MD), by virtue of its connectivity with the frontal cortex, has been implicated in an array of cognitive functions. Rather than serving as an engine or relay for the prefrontal cortex, this area seems to be more specifically involved in regulating plasticity and flexibility of prefrontal-dependent cognitive functions. Focal damage to MD may also exacerbate the effects of damage to other subcortical relays. Thus, a wide range of distributed circuits and cognitive functions may be disrupted from focal damage within the medial thalamus (for example as a consequence of stroke or brain injury). Conversely, this region may make an interesting target for neuromodulation of cognitive function via deep brain stimulation or related methods, in conditions associated with dysfunction of these neural circuits.

Food-Derived Antioxidant Polysaccharides and Their Pharmacological Potential in Neurodegenerative Diseases

PubMed Central

Li, Haifeng; Ding, Fei; Xiao, Lingyun; Shi, Ruona; Wang, Hongyu; Han, Wenjing

2017-01-01

Oxidative stress is known to impair architecture and function of cells, which may lead to various chronic diseases, and therefore therapeutic and nutritional interventions to reduce oxidative damages represent a viable strategy in the amelioration of oxidative stress-related disorders, including neurodegenerative diseases. Over the past decade, a variety of natural polysaccharides from functional and medicinal foods have attracted great interest due to their antioxidant functions such as scavenging free radicals and reducing oxidative damages. Interestingly, these antioxidant polysaccharides are also found to attenuate neuronal damages and alleviate cognitive and motor decline in a range of neurodegenerative models. It has recently been established that the neuroprotective mechanisms of polysaccharides are related to oxidative stress-related pathways, including mitochondrial function, antioxidant defense system and pathogenic protein aggregation. Here, we first summarize the current status of antioxidant function of food-derived polysaccharides and then attempt to appraise their anti-neurodegeneration activities. PMID:28753972

Genetics Home Reference: prolidase deficiency

MedlinePlus

... mutations as a tool to investigate structure-function relationship. J Hum Genet. 2004;49(9):500-6. ... for Links Data Files & API Site Map Subscribe Customer Support USA.gov Copyright Privacy Accessibility FOIA Viewers & ...

The E-Business Opportunity: A Key Role for Business Educators.

ERIC Educational Resources Information Center

McGrath, Leanne C.; Lomerson, William L.

2001-01-01

Outlines considerations for pursuing electronic business: website content; cost of authoring, hosting, and registering domains; design (usability, aesthetics, functionality, confidentiality); customer focus; marketing; and maintenance. (Contains 29 references.) (SK)

Real Time Fatigue Damage Growth Assessment of a Composite Three-Stringer Panel Using Passive Thermography

NASA Technical Reports Server (NTRS)

Zalameda, Joseph N.; Burke, Eric R.; Horne, Michael R.; Bly, James B.

2015-01-01

Fatigue testing of advanced composite structures is critical to validate both structural designs and damage prediction models. In-situ inspection methods are necessary to track damage onset and growth as a function of load cycles. Passive thermography is a large area, noncontact inspection technique that is used to detect composite damage onset and growth in real time as a function of fatigue cycles. The thermal images are acquired in synchronicity to the applied compressive load using a dual infrared camera acquisition system for full (front and back) coverage. Image processing algorithms are investigated to increase defect contrast areas. The thermal results are compared to non-immersion ultrasound inspections and acoustic emission data.

PHYSICAL AND ECONOMIC DAMAGE FUNCTIONS FOR AIR POLLUTANTS BY RECEPTOR

EPA Science Inventory

This study is primarily concerned with evaluating regional economic damages to human health, material, and vegetation and of property soiling resulting from air pollution. This study represents a step forward in methodological development of air pollution damage estimation. It at...

The use of an Ossis custom 3D-printed tri-flanged acetabular implant for major bone loss: minimum 2-year follow-up: Short title: Ossis custom 3D-Printed tri-flanged acetabular implant.

PubMed

Kieser, David C; Ailabouni, Ramez; Kieser, Sandra C J; Wyatt, Michael C; Armour, Paul C; Coates, Mark H; Hooper, Gary J

2018-05-01

Custom 3D-printed acetabular implants are a new technology used in hip surgery with ever-increasing frequency. They offer patient-specific implants to optimise filling of bone defects and implant-bone contact, without the need for excessive bone resection. This is a retrospective cohort study of 46 consecutive patients who underwent an Ossis unilateral custom 3D-printed acetabular implant. Clinical (Oxford Hip Score OHS-60), Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC), Harris Hip Score (HHS) and radiological (restoration of biomechanical hip centre, osteointegration, wear, heterotrophic ossification) results were assessed. Patient mean age was 68 years and follow-up was 38 months (minimum 24 months). 10 patients were excluded from the outcome analysis; 2 patients died, 1 required revision for deep infection and 7 were lost to follow-up. Of the 36 patients included, 21 had severe osteolysis. 7 were revised for infection, 3 for tumoural defects, 3 for metallosis, 1 for dysplasia and 1 for trauma (Paprosky 2a [n=6], 2b [n=2], 2c [n=5], 3a [n=6], 3b [n=11], pelvic dissociation [n=6]). OHS significantly improved postoperatively (16-8-48.4 p=0.027). Postoperative functional scores were good (WOMAC 98; HHS 79). The biomechanical hip centre was restored in all patients. 1 patient had early implant migration with subsequent stabilisation. 2 patients had radiographs concerning for failure of osteointegration. 1 patient had recurrent dislocations. The mid-term results of the Ossis custom 3D-printed tri-flanged acetabular implant for the management of severe acetabular defects are encouraging. The improvement in functional scores and radiographic outcomes are comparable to similar designs. In addition, no cases have required revision for aseptic loosening.

The design of optimal electric power demand management contracts

NASA Astrophysics Data System (ADS)

Fahrioglu, Murat

1999-11-01

Our society derives a quantifiable benefit from electric power. In particular, forced outages or blackouts have enormous consequences on society, one of which is loss of economic surplus. Electric utilities try to provide reliable supply of electric power to their customers. Maximum customer benefit derives from minimum cost and sufficient supply availability. Customers willing to share in "availability risk" can derive further benefit by participating in controlled outage programs. Specifically, whenever utilities foresee dangerous loading patterns, there is a need for a rapid reduction in demand either system-wide or at specific locations. The utility needs to get relief in order to solve its problems quickly and efficiently. This relief can come from customers who agree to curtail their loads upon request in exchange for an incentive fee. This thesis shows how utilities can get efficient load relief while maximizing their economic benefit. This work also shows how estimated customer cost functions can be calibrated, using existing utility data, to help in designing efficient demand management contracts. In order to design such contracts, optimal mechanism design is adopted from "Game Theory" and applied to the interaction between a utility and its customers. The idea behind mechanism design is to design an incentive structure that encourages customers to sign up for the right contract and reveal their true value of power. If a utility has demand management contracts with customers at critical locations, most operational problems can be solved efficiently. This thesis illustrates how locational attributes of customers incorporated into demand management contract design can have a significant impact in solving system problems. This kind of demand management contracts can also be used by an Independent System Operator (ISO). During times of congestion a loss of economic surplus occurs. When the market is too slow or cannot help relieve congestion, demand management can help solve the problem. Another tool the ISO requires for security purposes is reserves. Even though demand management contracts may not be a good substitute for spinning reserves, they are adequate to augment or replace supplemental and backup reserves.

[Computer aided design and 3-dimensional printing for the production of custom trays of maxillary edentulous jaws based on 3-dimensional scan of primary impression].

PubMed

Chen, H; Zhao, T; Wang, Y; Sun, Y C

2016-10-18

To establish a digital method for production of custom trays for edentulous jaws using fused deposition modeling (FDM) based on three-dimensional (3D) scans of primary jaw impressions, and to quantitatively evaluate the accuracy. A red modeling compound was used to make a primary impression of a standard maxillary edentulous plaster model. The plaster model data and the primary impression tissue surface data were obtained using a 3D scanner. In the Gemomagic 2012 software, several commands were used, such as interactive drawing curves, partial filling holes, local offset, bodily offset, bodily shell, to imitate clinical procedures of drawing tray boundary, filling undercut, buffer, and generating the tray body. A standard shape of tray handle was designed and attached to the tray body and the data saved as stereolithography (STL) format. The data were imported into a computer system connected to a 3D FDM printing device, and the custom tray for the edentulous jaw model was printed layer upon layer at 0.2 mm/layer, using polylactic acid (PLA) filament, the tissue surface of the tray was then scanned with a 3D scanner. The registration functions of Geomagic 2012 was used to register the 3-dimentional surface data, and the point-cloud deviation analysis function of the Imageware 13.0 system was used to analyze the error. The CAD data of the custom tray was registered to the scan data, and the error between them was analyzed. The scanned plaster model surface was registered to the scanned impression surface and the scanned tray data to the CAD data, then the distance between the surface of plaster model and the scanned tissue surface of the custom tray was measured in Imageware 13.0. The deviation between the computer aided design data and the scanned data of the custom tray was (0.17±0.20) mm, with (0.19±0.18) mm in the primary stress-bearing area, (0.17±0.22) mm in the secondary stress-bearing area, (0.30±0.29) mm in the border seal area, (0.08±0.06) mm in the buffer area; the space between the tissue faces of the plaster model and the scanned tissue surface of custom tray was (1.98±0.40) mm, with (1.85±0.24) mm in the primary stress-bearing area, (1.86±0.26) mm in the secondary stress-bearing area, (1.77±0.36) mm in the border seal area, (2.90±0.26) mm in the buffer area. With 3D scanning, computer aided design and FDM technology, an efficient means of custom tray production was established.

Advanced information processing system

NASA Technical Reports Server (NTRS)

Lala, J. H.

1984-01-01

Design and performance details of the advanced information processing system (AIPS) for fault and damage tolerant data processing on aircraft and spacecraft are presented. AIPS comprises several computers distributed throughout the vehicle and linked by a damage tolerant data bus. Most I/O functions are available to all the computers, which run in a TDMA mode. Each computer performs separate specific tasks in normal operation and assumes other tasks in degraded modes. Redundant software assures that all fault monitoring, logging and reporting are automated, together with control functions. Redundant duplex links and damage-spread limitation provide the fault tolerance. Details of an advanced design of a laboratory-scale proof-of-concept system are described, including functional operations.

Mechanisms of Radiation Induced Effects in Carbon Nanotubes

DTIC Science & Technology

2016-10-01

the defect types created for both ionizing and non-ionizing particles under exposure to high total ionization and displacement damage doses. Carbon...and displacement damage doses. Additionally, the radiation effects on CNT carrier transport parameters (mobility, lifetime, conductivity) have been...thermal oxidation. 2. Radiation Testing of SWCNTs 2.1 Displacement Damage Dose Effects as a Function of SWCNT Electronic-Type Displacement damage does

Polyphosphate is a key factor for cell survival after DNA damage in eukaryotic cells.

PubMed

Bru, Samuel; Samper-Martín, Bàrbara; Quandt, Eva; Hernández-Ortega, Sara; Martínez-Laínez, Joan M; Garí, Eloi; Rafel, Marta; Torres-Torronteras, Javier; Martí, Ramón; Ribeiro, Mariana P C; Jiménez, Javier; Clotet, Josep

2017-09-01

Cells require extra amounts of dNTPs to repair DNA after damage. Polyphosphate (polyP) is an evolutionary conserved linear polymer of up to several hundred inorganic phosphate (Pi) residues that is involved in many functions, including Pi storage. In the present article, we report on findings demonstrating that polyP functions as a source of Pi when required to sustain the dNTP increment essential for DNA repair after damage. We show that mutant yeast cells without polyP produce less dNTPs upon DNA damage and that their survival is compromised. In contrast, when polyP levels are ectopically increased, yeast cells become more resistant to DNA damage. More importantly, we show that when polyP is reduced in HEK293 mammalian cell line cells and in human dermal primary fibroblasts (HDFa), these cells become more sensitive to DNA damage, suggesting that the protective role of polyP against DNA damage is evolutionary conserved. In conclusion, we present polyP as a molecule involved in resistance to DNA damage and suggest that polyP may be a putative target for new approaches in cancer treatment or prevention. Copyright © 2017 Elsevier B.V. All rights reserved.

Two familial ALS proteins function in prevention/repair of transcription-associated DNA damage.

PubMed

Hill, Sarah J; Mordes, Daniel A; Cameron, Lisa A; Neuberg, Donna S; Landini, Serena; Eggan, Kevin; Livingston, David M

2016-11-29

Amyotrophic lateral sclerosis (ALS) is a progressive motor neuron dysfunction disease that leads to paralysis and death. There is currently no established molecular pathogenesis pathway. Multiple proteins involved in RNA processing are linked to ALS, including FUS and TDP43, and we propose a disease mechanism in which loss of function of at least one of these proteins leads to an accumulation of transcription-associated DNA damage contributing to motor neuron cell death and progressive neurological symptoms. In support of this hypothesis, we find that FUS or TDP43 depletion leads to increased sensitivity to a transcription-arresting agent due to increased DNA damage. Thus, these proteins normally contribute to the prevention or repair of transcription-associated DNA damage. In addition, both FUS and TDP43 colocalize with active RNA polymerase II at sites of DNA damage along with the DNA damage repair protein, BRCA1, and FUS and TDP43 participate in the prevention or repair of R loop-associated DNA damage, a manifestation of aberrant transcription and/or RNA processing. Gaining a better understanding of the role(s) that FUS and TDP43 play in transcription-associated DNA damage could shed light on the mechanisms underlying ALS pathogenesis.

Two familial ALS proteins function in prevention/repair of transcription-associated DNA damage

PubMed Central

Hill, Sarah J.; Mordes, Daniel A.; Cameron, Lisa A.; Neuberg, Donna S.; Landini, Serena; Eggan, Kevin; Livingston, David M.

2016-01-01

Amyotrophic lateral sclerosis (ALS) is a progressive motor neuron dysfunction disease that leads to paralysis and death. There is currently no established molecular pathogenesis pathway. Multiple proteins involved in RNA processing are linked to ALS, including FUS and TDP43, and we propose a disease mechanism in which loss of function of at least one of these proteins leads to an accumulation of transcription-associated DNA damage contributing to motor neuron cell death and progressive neurological symptoms. In support of this hypothesis, we find that FUS or TDP43 depletion leads to increased sensitivity to a transcription-arresting agent due to increased DNA damage. Thus, these proteins normally contribute to the prevention or repair of transcription-associated DNA damage. In addition, both FUS and TDP43 colocalize with active RNA polymerase II at sites of DNA damage along with the DNA damage repair protein, BRCA1, and FUS and TDP43 participate in the prevention or repair of R loop-associated DNA damage, a manifestation of aberrant transcription and/or RNA processing. Gaining a better understanding of the role(s) that FUS and TDP43 play in transcription-associated DNA damage could shed light on the mechanisms underlying ALS pathogenesis. PMID:27849576