Science.gov

Sample records for cutting earthwork

  1. Method and apparatus for controlling an earthworking implement to preserve a crown on a road surface

    NASA Technical Reports Server (NTRS)

    Staub, Michael D. (Inventor); Alster, Louis G. (Inventor); Lundquist, Steve D. (Inventor)

    1999-01-01

    A method and apparatus for controlling an earthworking implement on an earthworking machine to preserve a crown on the surface of a road, including determining the position of the crown on the road surface, choosing a sloped grade on one side of the crown, positioning the earthworking implement on the sloped grade so that a first end of the earthworking implement is on the road surface. The processor determines a desired position of a second end of the earthworking implement so that the second end overlaps the crown and the earthworking implement does not cut the crown.

  2. Evaluation of Dynamic Methods for Earthwork Assessment

    NASA Astrophysics Data System (ADS)

    Vlček, Jozef; Ďureková, Dominika; Zgútová, Katarína

    2015-05-01

    Rapid development of road construction imposes requests on fast and quality methods for earthwork quality evaluation. Dynamic methods are now adopted in numerous civil engineering sections. Especially evaluation of the earthwork quality can be sped up using dynamic equipment. This paper presents the results of the parallel measurements of chosen devices for determining the level of compaction of soils. Measurements were used to develop the correlations between values obtained from various apparatuses. Correlations show that examined apparatuses are suitable for examination of compaction level of fine-grained soils with consideration of boundary conditions of used equipment. Presented methods are quick and results can be obtained immediately after measurement, and they are thus suitable in cases when construction works have to be performed in a short period of time.

  3. Earthworks: Educating Teachers in Earth System Sciences

    NASA Technical Reports Server (NTRS)

    Spetzler, H.; Weaver, A.; Buhr, S.

    2000-01-01

    Earthworks is a national community of teachers and scientists. Initiated in 1998 with funding from NASA, our summer workshops in the Rocky Mountains each year provide unique opportunities for teachers to design and conduct field research projects, working closely with scientists. Teachers then develop plans for classroom implementation during the school year, sharing their ideas and experiences with other community members through e-mail and a listserv. Scientists, from graduate students to expert senior researchers, share their knowledge of field methods in environmental science, and learn how to better communicate and teach about their research.

  4. Modern Earthworks and Their Cosmic Embrace

    NASA Astrophysics Data System (ADS)

    Hatch, J. G.

    2011-06-01

    This paper examines the use of sky imagery in a number of modern Earthworks. They range from Robert Smithson's Spiral Jetty (1970), Robert Morris' Observatory (1971), Nancy Holt's Sun Tunnels (1973-76), to ongoing manifestations like Charles Ross' Star Axis (1971-present) and James Turrell's Roden Crater Project (1974-present). My interest in discussing these various works is to look at why so many of them have focused on the firmament, what factors contributed to this interest, their specific meaning, what the various sites of these works have offered, and last but not least, their possible relationship to past Earth projects, like Stonehenge and Machu Picchu, for example, that have also embraced the sky as their subject.

  5. SCEC Earthworks: A TeraGrid Science Gateway

    NASA Astrophysics Data System (ADS)

    Francoeur, H.; Muench, J.; Okaya, D.; Maechling, P.; Deelman, E.; Mehta, G.

    2006-12-01

    SCEC Earthworks is a scientific gateway designed to provide community wide access to the TeraGrid. Earthworks provides its users with a portal based interface for easily running anelastic wave propagation (AWM) simulations. Using Gridsphere and several portlets developed as a collaborative effort with IRIS, Earthworks enables users to run simulations without any knowledge of the underlying workflow technology needed to utilize the TeraGrid. The workflow technology behind Earthworks has been developed as a collaborative effort between SCEC and the Information Sciences Institute (ISI). Earthworks uses a complex software stack to translate abstract workflows defined by the user into a series of jobs that run on a number of computational resources. These computational resources include a combination of servers provided by SCEC, USC High Performance Computing Center and NSF TeraGrid supercomputer facilities. Workflows are constructed after input from the user is passed via a Java based interface to the Earthworks backend, where a DAX (directed acyclic graph in XML) is generated. This DAX describes each step of the workflow including its inputs, outputs, and arguments, as well as the parent child relationships between each process. The DAX is then handed off to the Virtual Data System (VDS) and Pegasus provided by ISI, which translate it from an abstract workflow to a concrete workflow by filling in logical file and application names with their physical path and location. This newly created DAG (directed acyclic graph) is handed off to the Condor scheduler. The bottom part of the software stack is a Globus installation at each site the provides local transfer and resource management capabilities. Resources across different sites are transparently managed and tracked by VDS which allows greater flexibility in running the workflows. After a workflow is completed, products and metadata are registered with integrated data management tools. This allows for metadata querying

  6. Remember Native America! The Earthworks of Ancient America.

    ERIC Educational Resources Information Center

    Balthazar, Richard

    In the eighteenth and early nineteenth centuries prehistoric earthworks were to be seen throughout North America. Fascinated colonialist and European settlers attributed these mysterious mounds to mythic Eurocentric sources rather recognizing them as evidence of prehistoric Amerinds. By the end of the nineteenth century interest in the…

  7. Soil moisture and strength index for earthwork construction quality control

    NASA Astrophysics Data System (ADS)

    Sawangsuriya, A.; Wachiraporn, S.; Sramoon, W.

    2015-09-01

    This paper presents the implementation of soil moisture and strength index measurements for earthwork construction quality control as well as a link between the in situ testing and structural property of earthen materials. Use of the convenient Dynamic Cone Penetrometer (DCP) in conjunction with conventional moisture-density measurements enhances quality control by achieving acceptable level of compaction, more uniform structural properties, and aids developing a controlled design parameter during the earthwork construction. Soil strength in term of DCP index normalized by the deviation of compaction moisture content from the optimum moisture content is proposed as performance criteria for a variety of engineered earth fills and special engineering assessment, prevention, and mitigation of geohazards e.g. earthen flood defense embankments.

  8. Environmental impact of geometric earthwork construction in pre-Columbian Amazonia.

    PubMed

    Carson, John Francis; Whitney, Bronwen S; Mayle, Francis E; Iriarte, José; Prümers, Heiko; Soto, J Daniel; Watling, Jennifer

    2014-07-22

    There is considerable controversy over whether pre-Columbian (pre-A.D. 1492) Amazonia was largely "pristine" and sparsely populated by slash-and-burn agriculturists, or instead a densely populated, domesticated landscape, heavily altered by extensive deforestation and anthropogenic burning. The discovery of hundreds of large geometric earthworks beneath intact rainforest across southern Amazonia challenges its status as a pristine landscape, and has been assumed to indicate extensive pre-Columbian deforestation by large populations. We tested these assumptions using coupled local- and regional-scale paleoecological records to reconstruct land use on an earthwork site in northeast Bolivia within the context of regional, climate-driven biome changes. This approach revealed evidence for an alternative scenario of Amazonian land use, which did not necessitate labor-intensive rainforest clearance for earthwork construction. Instead, we show that the inhabitants exploited a naturally open savanna landscape that they maintained around their settlement despite the climatically driven rainforest expansion that began ∼2,000 y ago across the region. Earthwork construction and agriculture on terra firme landscapes currently occupied by the seasonal rainforests of southern Amazonia may therefore not have necessitated large-scale deforestation using stone tools. This finding implies far less labor--and potentially lower population density--than previously supposed. Our findings demonstrate that current debates over the magnitude and nature of pre-Columbian Amazonian land use, and its impact on global biogeochemical cycling, are potentially flawed because they do not consider this land use in the context of climate-driven forest-savanna biome shifts through the mid-to-late Holocene.

  9. Environmental impact of geometric earthwork construction in pre-Columbian Amazonia.

    PubMed

    Carson, John Francis; Whitney, Bronwen S; Mayle, Francis E; Iriarte, José; Prümers, Heiko; Soto, J Daniel; Watling, Jennifer

    2014-07-22

    There is considerable controversy over whether pre-Columbian (pre-A.D. 1492) Amazonia was largely "pristine" and sparsely populated by slash-and-burn agriculturists, or instead a densely populated, domesticated landscape, heavily altered by extensive deforestation and anthropogenic burning. The discovery of hundreds of large geometric earthworks beneath intact rainforest across southern Amazonia challenges its status as a pristine landscape, and has been assumed to indicate extensive pre-Columbian deforestation by large populations. We tested these assumptions using coupled local- and regional-scale paleoecological records to reconstruct land use on an earthwork site in northeast Bolivia within the context of regional, climate-driven biome changes. This approach revealed evidence for an alternative scenario of Amazonian land use, which did not necessitate labor-intensive rainforest clearance for earthwork construction. Instead, we show that the inhabitants exploited a naturally open savanna landscape that they maintained around their settlement despite the climatically driven rainforest expansion that began ∼2,000 y ago across the region. Earthwork construction and agriculture on terra firme landscapes currently occupied by the seasonal rainforests of southern Amazonia may therefore not have necessitated large-scale deforestation using stone tools. This finding implies far less labor--and potentially lower population density--than previously supposed. Our findings demonstrate that current debates over the magnitude and nature of pre-Columbian Amazonian land use, and its impact on global biogeochemical cycling, are potentially flawed because they do not consider this land use in the context of climate-driven forest-savanna biome shifts through the mid-to-late Holocene. PMID:25002502

  10. Environmental impact of geometric earthwork construction in pre-Columbian Amazonia

    PubMed Central

    Carson, John Francis; Whitney, Bronwen S.; Mayle, Francis E.; Iriarte, José; Prümers, Heiko; Soto, J. Daniel; Watling, Jennifer

    2014-01-01

    There is considerable controversy over whether pre-Columbian (pre-A.D. 1492) Amazonia was largely “pristine” and sparsely populated by slash-and-burn agriculturists, or instead a densely populated, domesticated landscape, heavily altered by extensive deforestation and anthropogenic burning. The discovery of hundreds of large geometric earthworks beneath intact rainforest across southern Amazonia challenges its status as a pristine landscape, and has been assumed to indicate extensive pre-Columbian deforestation by large populations. We tested these assumptions using coupled local- and regional-scale paleoecological records to reconstruct land use on an earthwork site in northeast Bolivia within the context of regional, climate-driven biome changes. This approach revealed evidence for an alternative scenario of Amazonian land use, which did not necessitate labor-intensive rainforest clearance for earthwork construction. Instead, we show that the inhabitants exploited a naturally open savanna landscape that they maintained around their settlement despite the climatically driven rainforest expansion that began ∼2,000 y ago across the region. Earthwork construction and agriculture on terra firme landscapes currently occupied by the seasonal rainforests of southern Amazonia may therefore not have necessitated large-scale deforestation using stone tools. This finding implies far less labor—and potentially lower population density—than previously supposed. Our findings demonstrate that current debates over the magnitude and nature of pre-Columbian Amazonian land use, and its impact on global biogeochemical cycling, are potentially flawed because they do not consider this land use in the context of climate-driven forest–savanna biome shifts through the mid-to-late Holocene. PMID:25002502

  11. Railway cuttings and embankments: Experimental and numerical studies of ground vibration.

    PubMed

    Kouroussis, Georges; Connolly, David P; Olivier, Bryan; Laghrouche, Omar; Costa, Pedro Alves

    2016-07-01

    Railway track support conditions affect ground-borne vibration generation and propagation. Therefore this paper presents a combined experimental and numerical study into high speed rail vibrations for tracks on three types of support: a cutting, an embankment and an at grade section. Firstly, an experimental campaign is undertaken where vibrations and in-situ soil properties are measured at three Belgian rail sites. A finite element model is then developed to recreate the complex ground topology at each site. A validation is performed and it is found that although the at-grade and embankment cases show a correlation with the experimental results, the cutting case is more challenging to replicate. Despite this, each site is then analysed to determine the effect of earthworks profile on ground vibrations, with both the near and far fields being investigated. It is found that different earthwork profiles generate strongly differing ground-borne vibration characteristics, with the embankment profile generating lower vibration levels in comparison to the cutting and at-grade cases. Therefore it is concluded that it is important to consider earthwork profiles when undertaking vibration assessments. PMID:26994799

  12. Railway cuttings and embankments: Experimental and numerical studies of ground vibration.

    PubMed

    Kouroussis, Georges; Connolly, David P; Olivier, Bryan; Laghrouche, Omar; Costa, Pedro Alves

    2016-07-01

    Railway track support conditions affect ground-borne vibration generation and propagation. Therefore this paper presents a combined experimental and numerical study into high speed rail vibrations for tracks on three types of support: a cutting, an embankment and an at grade section. Firstly, an experimental campaign is undertaken where vibrations and in-situ soil properties are measured at three Belgian rail sites. A finite element model is then developed to recreate the complex ground topology at each site. A validation is performed and it is found that although the at-grade and embankment cases show a correlation with the experimental results, the cutting case is more challenging to replicate. Despite this, each site is then analysed to determine the effect of earthworks profile on ground vibrations, with both the near and far fields being investigated. It is found that different earthwork profiles generate strongly differing ground-borne vibration characteristics, with the embankment profile generating lower vibration levels in comparison to the cutting and at-grade cases. Therefore it is concluded that it is important to consider earthwork profiles when undertaking vibration assessments.

  13. Mitigation of environmental impacts due to ghat road formation in Palamalai Hills, South India, by optimizing cut and fill volumes using GPS and GIS techniques.

    PubMed

    Arulmozhi, R; Subramani, T; Sukumar, S

    2015-01-01

    Formation of new roads generally brings about adverse impact on the environment, and in the case of hill roads, the impact is diverse and effective measures are required to mitigate it. The common problems in hill road formation are tree cutting, destruction of canopies, change in land use pattern, soil erosion, slope instability, induced landslides, invasion of foreign species, and so on. Removal of trees and vegetations causes rapid soil erosion, landslides, and invasion of foreign species posing danger to the survival of weak native species. Dumping of surplus earth materials on the valley side poses a significant threat to the environment as it would cause induced landslides. Using the cut earth for filling in road formation and dumping, the surplus cut earth in safe locations will reduce environmental degradation considerably. Conventionally, hill road alignments are finalized using traditional survey methods using ghat tracer, compass, and leveling surveys which require enormous complicated field and office works. Any revision to reduce the quantum of earthwork is difficult in this method due to its complex nature. In the present study at Palamalai Hills, South India, an alignment for a length of 7.95 km was prepared by traditional methods using ghat tracer and total station instruments for survey works. The earthwork quantities were ascertained from the longitudinal profile of the alignment. A GPS survey was also conducted along the alignment to examine its utility in alignment modification. To modify the stretches, where the earthwork cutting and filling are above normal and unbalanced and result in surplus earth, repeated GPS surveys were conducted along different paths to optimize the earthwork. The earthwork quantities of the original alignment were analyzed, and its correlation with environmental effect and the usefulness of the GPS survey in this task are presented in this paper.

  14. Mitigation of environmental impacts due to ghat road formation in Palamalai Hills, South India, by optimizing cut and fill volumes using GPS and GIS techniques.

    PubMed

    Arulmozhi, R; Subramani, T; Sukumar, S

    2015-01-01

    Formation of new roads generally brings about adverse impact on the environment, and in the case of hill roads, the impact is diverse and effective measures are required to mitigate it. The common problems in hill road formation are tree cutting, destruction of canopies, change in land use pattern, soil erosion, slope instability, induced landslides, invasion of foreign species, and so on. Removal of trees and vegetations causes rapid soil erosion, landslides, and invasion of foreign species posing danger to the survival of weak native species. Dumping of surplus earth materials on the valley side poses a significant threat to the environment as it would cause induced landslides. Using the cut earth for filling in road formation and dumping, the surplus cut earth in safe locations will reduce environmental degradation considerably. Conventionally, hill road alignments are finalized using traditional survey methods using ghat tracer, compass, and leveling surveys which require enormous complicated field and office works. Any revision to reduce the quantum of earthwork is difficult in this method due to its complex nature. In the present study at Palamalai Hills, South India, an alignment for a length of 7.95 km was prepared by traditional methods using ghat tracer and total station instruments for survey works. The earthwork quantities were ascertained from the longitudinal profile of the alignment. A GPS survey was also conducted along the alignment to examine its utility in alignment modification. To modify the stretches, where the earthwork cutting and filling are above normal and unbalanced and result in surplus earth, repeated GPS surveys were conducted along different paths to optimize the earthwork. The earthwork quantities of the original alignment were analyzed, and its correlation with environmental effect and the usefulness of the GPS survey in this task are presented in this paper. PMID:25431192

  15. Time-lapse Monitoring of Geotechnical Properties of Heritage Earthworks by Means of Near-Surface Seismic Techniques

    NASA Astrophysics Data System (ADS)

    Bergamo, P.; Donohue, S.; Gunn, D.; Dashwood, B.

    2014-12-01

    Surface wave (SW) method and P-wave refraction tomography are widely spread methods for the characterization of the near-surface. We applied these techniques to a 1-year time-lapse monitoring of the geotechnical properties of a heritage earthwork at risk of failure, a stretch of the embankment of the Gloucestershire-Warwickshire railway in Laverton, UK. Like a significant part of UK railway network, this line was built in the early 20th century without modern construction standards. Poor maintenance and the increase in extreme weather events due to recent climate change have further compromised its stability. The aim of this monitoring campaign is to assess the capability of non-invasive and repeatable geophysical methods to measure temporal changes of mechanical parameters of earthworks. MASW (multichannel analysis of SW) and P-wave refraction data were repeatedly acquired along a 100 m line on the crest of the embankment, every other month from July 2013 to July 2014. Smaller scale seismic data were also recorded on the flanks of the embankment. Sensors measuring climate -temperature, precipitation, solar radiation - and geotechnical parameters - water content, suction - were installed at various locations and depths within the embankment. Moreover, penetrometric data were acquired, soil samples were analysed. SW data were analysed in terms of phase velocity and attenuation. Hodocrones, dispersion and attenuation curves show a limited but continuous seasonal change. SW dispersion curves and P-wave travel times were separately inverted for VS and VP models with a laterally constrained and a tomographic approach, respectively. The VS and VP sections describe the temporal variation of seismic properties of the embankment, consistent with the climate trend. Such results were jointly interpreted with data from field sensors and cone penetration testing. This calibration stage provides a geotechnical model that explains the temporal variations of seismic velocities

  16. Aerosol particle and trace gas emissions from earthworks, road construction, and asphalt paving in Germany: Emission factors and influence on local air quality

    NASA Astrophysics Data System (ADS)

    Faber, Peter; Drewnick, Frank; Borrmann, Stephan

    2015-12-01

    Aerosol emissions from construction sites have a strong impact on local air quality. The chemical and physical characteristics of particles and trace gases emitted by earthworks (excavation and loading of soil as well as traffic on unpaved roads) and road works (asphalt sawing, smashing, soil compacting, asphalt paving) have therefore been addressed in this study by using a mobile set-up of numerous modern online aerosol and trace gas instruments including a high-resolution aerosol mass spectrometer. Fuel-based emission factors for several variables have been determined, showing that earthwork activities and compacting by use of a plate compactor revealed the highest median emission factors for PM10 (up to 54 g l-1). Construction activities were assigned to contribute about 17% (36 000 t a-1) to total PM10 emissions and 3% (13 500 t a-1) to total traffic-related NOx emissions in Germany. In particular, calculated PM10 emissions by earthworks are about 15 800 t a-1 corresponding to 44% of total PM10 emissions by construction activities in Germany. Mechanical processes such as asphalt sawing (PM1/PM10 = 18 ± 31%), soil compacting by a plate compactor (PM1/PM10 = 5 ± 6%) and earthworks (PM1/PM10 = 2 ± 5%) emit predominantly coarse mineral dust particles. Contrary to that, particle emissions by thermal construction processes (asphalt paving: PM1/PM10 = 62 ± 14%) and by the internal combustion engines of heavy machinery (e.g. road roller PM1/PM10 = 94 ± 9%) are mostly in the submicron range. These particles were mainly composed of organics containing non-polar saturated and unsaturated hydrocarbons (e.g. asphalting: O:C < 0.01, H:C = 2.01). Besides construction activities, mineral dust is also emitted over cleared land by wind-driven resuspension depending on wind speed. PM10 emissions by construction activities often result in local concentrations > 100 μg m-3 and can easily breach the European limit level of PM10. This study also shows that particulate mineral

  17. Cutting assembly

    DOEpatents

    Racki, Daniel J.; Swenson, Clark E.; Bencloski, William A.; Wineman, Arthur L.

    1984-01-01

    A cutting apparatus includes a support table mounted for movement toward and away from a workpiece and carrying a mirror which directs a cutting laser beam onto the workpiece. A carrier is rotatably and pivotally mounted on the support table between the mirror and workpiece and supports a conduit discharging gas toward the point of impingement of the laser beam on the workpiece. Means are provided for rotating the carrier relative to the support table to place the gas discharging conduit in the proper positions for cuts made in different directions on the workpiece.

  18. Cutting Candles

    ERIC Educational Resources Information Center

    Ranucci, Ernest R.

    1973-01-01

    Different regular-polygon-shaped candles wound with a sheet of paper are cut through obliquely. When the papers are unwound, unique patterns are revealed. Investigation of these patterns leads to the discovery of geometric concepts. (JP)

  19. Precision laser cutting

    SciTech Connect

    Kautz, D.D.; Anglin, C.D.; Ramos, T.J.

    1990-01-19

    Many materials that are otherwise difficult to fabricate can be cut precisely with lasers. This presentation discusses the advantages and limitations of laser cutting for refractory metals, ceramics, and composites. Cutting in these materials was performed with a 400-W, pulsed Nd:YAG laser. Important cutting parameters such as beam power, pulse waveforms, cutting gases, travel speed, and laser coupling are outlined. The effects of process parameters on cut quality are evaluated. Three variables are used to determine the cut quality: kerf width, slag adherence, and metallurgical characteristics of recast layers and heat-affected zones around the cuts. Results indicate that ductile materials with good coupling characteristics (such as stainless steel alloys and tantalum) cut well. Materials lacking one or both of these properties (such as tungsten and ceramics) are difficult to cut without proper part design, stress relief, or coupling aids. 3 refs., 2 figs., 1 tab.

  20. Portable cutting apparatus

    DOEpatents

    Gilmore, R.F.

    1984-07-17

    A remotely operable, portable cutting apparatus detachably secured to the workpiece by laterally spaced clamp assemblies engagable with the workpiece on opposite sides of the intended line of cut. A reciprocal cutter head is mounted between the clamp assemblies and is provided with a traveling abrasive cutting wire adapted to sever the workpiece normal to the longitudinal axis thereof. Dust and debris are withdrawn from the cutting area by a vacuum force through a nozzle mounted on the cutting head.

  1. Cutting state identification

    SciTech Connect

    Berger, B.S.; Minis, I.; Rokni, M.

    1997-12-31

    Cutting states associated with the orthogonal cutting of stiff cylinders are identified through an analysis of the singular values of a Toeplitz matrix of third order cumulants of acceleration measurements. The ratio of the two pairs of largest singular values is shown to differentiate between light cutting, medium cutting, pre-chatter and chatter states. Sequences of cutting experiments were performed in which either depth of cut or turning frequency was varied. Two sequences of experiments with variable turning frequency and five with variable depth of cut, 42 cutting experiments in all, provided a database for the calculation of third order cumulants. Ratios of singular values of cumulant matrices find application in the analysis of control of orthogonal cutting.

  2. Cuts and puncture wounds

    MedlinePlus

    ... MINOR CUTS Wash your hands with soap or antibacterial cleanser to prevent infection. Then, wash the cut ... Use direct pressure to stop the bleeding. Apply antibacterial ointment and a clean bandage that will not ...

  3. Device for cutting protrusions

    DOEpatents

    Bzorgi, Fariborz M.

    2011-07-05

    An apparatus for clipping a protrusion of material is provided. The protrusion may, for example, be a bolt head, a nut, a rivet, a weld bead, or a temporary assembly alignment tab protruding from a substrate surface of assembled components. The apparatus typically includes a cleaver having a cleaving edge and a cutting blade having a cutting edge. Generally, a mounting structure configured to confine the cleaver and the cutting blade and permit a range of relative movement between the cleaving edge and the cutting edge is provided. Also typically included is a power device coupled to the cutting blade. The power device is configured to move the cutting edge toward the cleaving edge. In some embodiments the power device is activated by a momentary switch. A retraction device is also generally provided, where the retraction device is configured to move the cutting edge away from the cleaving edge.

  4. Laser cutting plastic materials

    SciTech Connect

    Van Cleave, R.A.

    1980-08-01

    A 1000-watt CO/sub 2/ laser has been demonstrated as a reliable production machine tool for cutting of plastics, high strength reinforced composites, and other nonmetals. More than 40 different plastics have been laser cut, and the results are tabulated. Applications for laser cutting described include fiberglass-reinforced laminates, Kevlar/epoxy composites, fiberglass-reinforced phenolics, nylon/epoxy laminates, ceramics, and disposable tooling made from acrylic.

  5. Ultrasonic Cutting of Foods

    NASA Astrophysics Data System (ADS)

    Schneider, Yvonne; Zahn, Susann; Rohm, Harald

    In the field of food engineering, cutting is usually classified as a mechanical unit operation dealing with size reduction by applying external forces on a bulk product. Ultrasonic cutting is realized by superpositioning the macroscopic feed motion of the cutting device or of the product with a microscopic vibration of the cutting tool. The excited tool interacts with the product and generates a number of effects. Primary energy concentration in the separation zone and the modification of contact friction along the tool flanks arise from the cyclic loading and are responsible for benefits such as reduced cutting force, smooth cut surface, and reduced product deformation. Secondary effects such as absorption and cavitation originate from the propagation of the sound field in the product and are closely related to chemical and physical properties of the material to be cut. This chapter analyzes interactions between food products and ultrasonic cutting tools and relates these interactions with physical and chemical product properties as well as with processing parameters like cutting velocity, ultrasonic amplitude and frequency, and tool design.

  6. When Students Cut Themselves

    ERIC Educational Resources Information Center

    Malikow, Max

    2006-01-01

    Masochism, the irrational self-infliction of pain, is more easily defined than understood. Once, a teacher used the word "cutting" only reference to a student skipping class. But, in recent years, it has taken on additional meaning. Cutting, or self-injury, is a deliberate self-harming behavior but without conscious suicidal ideation. To define…

  7. Laser Prepared Cutting Tools

    NASA Astrophysics Data System (ADS)

    Konrad, Wegener; Claus, Dold; Marcel, Henerichs; Christian, Walter

    Laser pulses with a pulsewidth of a few picoseconds have recently received a lot of attention, solving the problem of manufacturing tools for new materials of superior mechanical properties. Processing thermally sensitive material, such as diamond and CBN structures, can be done without major material deterioration effects. The breakthrough of this new technology becomes possible, if the accuracy and life time requirements of those tools are met. The paper shows in three applications the potential of laser manufacturing of cutting tools. Manufacturing of cutting edges for CFRP cutting needs sharp and stable cutting edges, which are prepared in PCD tools by laser sources in the picosecond pulsewidth regime. Profiling of hybrid bond grinding wheels yields geometric flexibility, which is impossible by mechanical treatment so far. Touch dressing of grinding wheels substantially reduces cutting forces.

  8. INTERNAL CUTTING DEVICE

    DOEpatents

    Russell, W.H. Jr.

    1959-06-30

    A device is described for removing material from the interior of a hollow workpiece so as to form a true spherical internal surface in a workpiece, or to cut radial slots of an adjustable constant depth in an already established spherical internal surface. This is accomplished by a spring loaded cutting tool adapted to move axially wherein the entire force urging the tool against the workpiece is derived from the spring. Further features of importance involve the provision of a seal between the workpiece and the cutting device and a suction device for carrying away particles of removed material.

  9. Laser cutting system

    SciTech Connect

    Dougherty, Thomas J

    2015-03-03

    A workpiece cutting apparatus includes a laser source, a first suction system, and a first finger configured to guide a workpiece as it moves past the laser source. The first finger includes a first end provided adjacent a point where a laser from the laser source cuts the workpiece, and the first end of the first finger includes an aperture in fluid communication with the first suction system.

  10. ADVANCED CUTTINGS TRANSPORT STUDY

    SciTech Connect

    Troy Reed; Stefan Miska; Nicholas Takach; Kaveh Ashenayi; Gerald Kane; Mark Pickell; Len Volk; Mike Volk; Affonso Lourenco; Evren Ozbayoglu; Lei Zhou

    2002-01-30

    This is the second quarterly progress report for Year 3 of the ACTS project. It includes a review of progress made in: (1) Flow Loop development and (2) research tasks during the period of time between Oct 1, 2001 and Dec. 31, 2001. This report presents a review of progress on the following specific tasks: (a) Design and development of an Advanced Cuttings Transport Facility (Task 3: Addition of a Cuttings Injection/Collection System), (b) Research project (Task 6): ''Study of Cuttings Transport with Foam Under LPAT Conditions (Joint Project with TUDRP)'', (c) Research project (Task 9): ''Study of Foam Flow Behavior Under EPET Conditions'', (d) Research project (Task 10): ''Study of Cuttings Transport with Aerated Mud Under Elevated Pressure and Temperature Conditions'', (e) Research on instrumentation tasks to measure: Cuttings concentration and distribution in a flowing slurry (Task 11), and Foam properties while transporting cuttings. (Task 12), (f) Development of a Safety program for the ACTS Flow Loop. Progress on a comprehensive safety review of all flow-loop components and operational procedures. (Task 1S). (g) Activities towards technology transfer and developing contacts with Petroleum and service company members, and increasing the number of JIP members.

  11. ADVANCED CUTTINGS TRANSPORT STUDY

    SciTech Connect

    Troy Reed; Stefan Miska; Nicholas Takach; Kaveh Ashenayi; Mark Pickell; Len Volk; Mike Volk; Evren Ozbayoglu; Lei Zhou

    2002-04-30

    This is the third quarterly progress report for Year 3 of the ACTS Project. It includes a review of progress made in: (1) Flow Loop construction and development and (2) research tasks during the period of time between Jan. 1, 2002 and Mar. 31, 2002. This report presents a review of progress on the following specific tasks: (a) Design and development of an Advanced Cuttings Transport Facility (Task 3: Addition of a Cuttings Injection/Separation System), (b) Research project (Task 6): ''Study of Cuttings Transport with Foam Under LPAT Conditions (Joint Project with TUDRP)'', (c) Research project (Task 9b): ''Study of Foam Flow Behavior Under EPET Conditions'', (d) Research project (Task 10): ''Study of Cuttings Transport with Aerated Mud Under Elevated Pressure and Temperature Conditions'', (e) Research on three instrumentation tasks to measure: Cuttings concentration and distribution in a flowing slurry (Task 11), Foam texture while transporting cuttings. (Task 12), and Viscosity of Foam under EPET (Task 9b); (f) Development of a Safety program for the ACTS Flow Loop, progress on a comprehensive safety review of all flow-loop components and operational procedures. (Task 1S); and (g) Activities towards technology transfer and developing contacts with Petroleum and service company members, and increasing the number of JIP members.

  12. ADVANCED CUTTINGS TRANSPORT STUDY

    SciTech Connect

    Troy Reed; Stefan Miska; Nicholas Takach; Kaveh Ashenayi; Gerald Kane; Mark Pickell; Len Volk; Mike Volk; Barkim Demirdal; Affonso Lourenco; Evren Ozbayoglu; Paco Vieira; Lei Zhou

    2000-01-30

    This is the second quarterly progress report for Year 2 of the ACTS project. It includes a review of progress made in Flow Loop development and research during the period of time between Oct 1, 2000 and December 31, 2000. This report presents a review of progress on the following specific tasks: (a) Design and development of an Advanced Cuttings Transport Facility (Task 2: Addition of a foam generation and breaker system), (b) Research project (Task 6): ''Study of Cuttings Transport with Foam Under LPAT Conditions (Joint Project with TUDRP)'', (c) Research project (Task 7): ''Study of Cuttings Transport with Aerated Muds Under LPAT Conditions (Joint Project with TUDRP)'', (d) Research project (Task 8): ''Study of Flow of Synthetic Drilling Fluids Under Elevated Pressure and Temperature Conditions'', (e) Research project (Task 9): ''Study of Foam Flow Behavior Under EPET Conditions'', (f) Research project (Task 10): ''Study of Cuttings Transport with Aerated Mud Under Elevated Pressure and Temperature Conditions'', (g) Research on instrumentation tasks to measure: Cuttings concentration and distribution in a flowing slurry (Task 11), and Foam properties while transporting cuttings. (Task 12), (h) Development of a Safety program for the ACTS Flow Loop. Progress on a comprehensive safety review of all flow-loop components and operational procedures. (Task 1S). (i) Activities towards technology transfer and developing contacts with Petroleum and service company members, and increasing the number of JIP members. The tasks Completed During This Quarter are Task 7 and Task 8.

  13. ADVANCED CUTTINGS TRANSPORT STUDY

    SciTech Connect

    Troy Reed; Stefan Miska; Nicholas Takach; Kaveh Ashenayi; Mark Pickell; Len Volk; Mike Volk; Lei Zhou; Zhu Chen; Crystal Redden; Aimee Washington

    2003-01-30

    This is the second quarterly progress report for Year-4 of the ACTS Project. It includes a review of progress made in: (1) Flow Loop construction and development and (2) research tasks during the period of time between October 1, 2002 and December 30, 2002. This report presents a review of progress on the following specific tasks. (a) Design and development of an Advanced Cuttings Transport Facility Task 3: Addition of a Cuttings Injection/Separation System, Task 4: Addition of a Pipe Rotation System. (b) New research project (Task 9b): ''Development of a Foam Generator/Viscometer for Elevated Pressure and Elevated Temperature (EPET) Conditions''. (d) Research project (Task 10): ''Study of Cuttings Transport with Aerated Mud Under Elevated Pressure and Temperature Conditions''. (e) Research on three instrumentation tasks to measure: Cuttings concentration and distribution in a flowing slurry (Task 11), Foam texture while transporting cuttings. (Task 12), and Viscosity of Foam under EPET (Task 9b). (f) New Research project (Task 13): ''Study of Cuttings Transport with Foam under Elevated Pressure and Temperature Conditions''. (g) Development of a Safety program for the ACTS Flow Loop. Progress on a comprehensive safety review of all flow-loop components and operational procedures. (Task 1S). (h) Activities towards technology transfer and developing contacts with Petroleum and service company members, and increasing the number of JIP members.

  14. ADVANCED CUTTINGS TRANSPORT STUDY

    SciTech Connect

    Troy Reed; Stefan Miska; Nicholas Takach; Kaveh Ashenayi; Mark Pickell; Len Volk; Mike Volk; Evren Ozbayoglu; Lei Zhou

    2002-07-30

    This is the fourth quarterly progress report for Year-3 of the ACTS Project. It includes a review of progress made in: (1) Flow Loop construction and development and (2) research tasks during the period of time between April 1, 2002 and June 30, 2002. This report presents a review of progress on the following specific tasks: (a) Design and development of an Advanced Cuttings Transport Facility (Task 3: Addition of a Cuttings Injection/Separation System), (b) Research project (Task 6): ''Study of Cuttings Transport with Foam Under LPAT Conditions (Joint Project with TUDRP)''; (c) Research project (Task 9b): ''Study of Foam Flow Behavior Under EPET Conditions''; (d) Research project (Task 10): ''Study of Cuttings Transport with Aerated Mud Under Elevated Pressure and Temperature Conditions''; (e) Research on three instrumentation tasks to measure: Cuttings concentration and distribution in a flowing slurry (Task 11), Foam texture while transporting cuttings. (Task 12), and Viscosity of Foam under EPET (Task 9b); (f) Development of a Safety program for the ACTS Flow Loop. Progress on a comprehensive safety review of all flow-loop components and operational procedures. (Task 1S); (g) Activities towards technology transfer and developing contacts with Petroleum and service company members, and increasing the number of JIP members.

  15. ADVANCED CUTTINGS TRANSPORT STUDY

    SciTech Connect

    Stefan Miska; Nicholas Takach; Kaveh Ashenayi; Mengjiao Yu; Ramadan Ahmed; Mark Pickell; Len Volk; Lei Zhou; Zhu Chen; Aimee Washington; Crystal Redden

    2003-09-30

    The Quarter began with installing the new drill pipe, hooking up the new hydraulic power unit, completing the pipe rotation system (Task 4 has been completed), and making the SWACO choke operational. Detailed design and procurement work is proceeding on a system to elevate the drill-string section. The prototype Foam Generator Cell has been completed by Temco and delivered. Work is currently underway to calibrate the system. Literature review and preliminary model development for cuttings transportation with polymer foam under EPET conditions are in progress. Preparations for preliminary cuttings transport experiments with polymer foam have been completed. Two nuclear densitometers were re-calibrated. Drill pipe rotation system was tested up to 250 RPM. Water flow tests were conducted while rotating the drill pipe up to 100 RPM. The accuracy of weight measurements for cuttings in the annulus was evaluated. Additional modifications of the cuttings collection system are being considered in order to obtain the desired accurate measurement of cuttings weight in the annular test section. Cutting transport experiments with aerated fluids are being conducted at EPET, and analyses of the collected data are in progress. The printed circuit board is functioning with acceptable noise level to measure cuttings concentration at static condition using ultrasonic method. We were able to conduct several tests using a standard low pass filter to eliminate high frequency noise. We tested to verify that we can distinguish between different depths of sand in a static bed of sand. We tested with water, air and a mix of the two mediums. Major modifications to the DTF have almost been completed. A stop-flow cell is being designed for the DTF, the ACTF and Foam Generator/Viscometer which will allow us to capture bubble images without the need for ultra fast shutter speeds or microsecond flash system.

  16. Determination of cut front position in laser cutting

    NASA Astrophysics Data System (ADS)

    Pereira, M.; Thombansen, U.

    2016-07-01

    Laser cutting has a huge importance to manufacturing industry. Laser cutting machines operate with fixed technological parameters and this does not guarantee the best productivity. The adjustment of the cutting parameters during operation can improve the machine performance. Based on a coaxial measuring device it is possible to identify the cut front position during the cutting process. This paper describes the data analysis approach used to determine the cut front position for different feed rates. The cut front position was determined with good resolution, but improvements are needed to make the whole process more stable.

  17. ADVANCED CUTTINGS TRANSPORT STUDY

    SciTech Connect

    Troy Reed; Stefan Miska; Nicholas Takach; Kaveh Ashenayi; Gerald Kane; Mark Pickell; Len Volk; Mike Volk; Barkim Demirdal; Affonso Lourenco; Evren Ozbayoglu; Paco Vieira

    2000-10-30

    This is the first quarterly progress report for Year 2 of the ACTS project. It includes a review of progress made in Flow Loop development and research during the period of time between July 14, 2000 and September 30, 2000. This report presents information on the following specific tasks: (a) Progress in Advanced Cuttings Transport Facility design and development (Task 2), (b) Progress on research project (Task 8): ''Study of Flow of Synthetic Drilling Fluids Under Elevated Pressure and Temperature Conditions'', (c) Progress on research project (Task 6): ''Study of Cuttings Transport with Foam Under LPAT Conditions (Joint Project with TUDRP)'', (d) Progress on research project (Task 7): ''Study of Cuttings Transport with Aerated Muds Under LPAT Conditions (Joint Project with TUDRP)'', (e) Progress on research project (Task 9): ''Study of Foam Flow Behavior Under EPET Conditions'', (f) Initiate research on project (Task 10): ''Study of Cuttings Transport with Aerated Mud Under Elevated Pressure and Temperature Conditions'', (g) Progress on instrumentation tasks to measure: Cuttings concentration and distribution (Tasks 11), and Foam properties (Task 12), (h) Initiate a comprehensive safety review of all flow-loop components and operational procedures. Since the previous Task 1 has been completed, we will now designate this new task as: (Task 1S). (i) Activities towards technology transfer and developing contacts with Petroleum and service company members, and increasing the number of JIP members.

  18. ADVANCED CUTTINGS TRANSPORT STUDY

    SciTech Connect

    Troy Reed; Stefan Miska; Nicholas Takach; Kaveh Ashenayi; Mark Pickell; Len Volk, Mike Volk; Lei Zhou; Zhu Chen; Crystal Redden; Aimee Washington

    2002-10-30

    This is the first quarterly progress report for Year-4 of the ACTS Project. It includes a review of progress made in: (1) Flow Loop construction and development and (2) research tasks during the period of time between July 1, 2002 and Sept. 30, 2002. This report presents a review of progress on the following specific tasks: (a) Design and development of an Advanced Cuttings Transport Facility Task 3: Addition of a Cuttings Injection/Separation System, Task 4: Addition of a Pipe Rotation System, (b) New Research project (Task 9b): ''Development of a Foam Generator/Viscometer for Elevated Pressure and Elevated Temperature (EPET) Conditions'', (d) Research project (Task 10): ''Study of Cuttings Transport with Aerated Mud Under Elevated Pressure and Temperature Conditions'', (e) Research on three instrumentation tasks to measure: Cuttings concentration and distribution in a flowing slurry (Task 11), Foam texture while transporting cuttings (Task 12), Viscosity of Foam under EPET (Task 9b). (f) Development of a Safety program for the ACTS Flow Loop. Progress on a comprehensive safety review of all flow-loop components and operational procedures. (Task 1S). (g) Activities towards technology transfer and developing contacts with Petroleum and service company members, and increasing the number of JIP members.

  19. ADVANCED CUTTINGS TRANSPORT STUDY

    SciTech Connect

    Ergun Kuru; Stefan Miska; Nicholas Takach; Kaveh Ashenayi; Gerald Kane; Len Volk; Mark Pickell; Evren Ozbayoglu; Barkim Demirdal; Paco Vieira; Affonso Lourenco

    1999-10-15

    This report includes a review of the progress made in ACTF Flow Loop development and research during 90 days pre-award period (May 15-July 14, 1999) and the following three months after the project approval date (July15-October 15, 1999) The report presents information on the following specific subjects; (a) Progress in Advanced Cuttings Transport Facility design and development, (b) Progress report on the research project ''Study of Flow of Synthetic Drilling Fluids Under Elevated Pressure and Temperature Conditions'', (c) Progress report on the research project ''Study of Cuttings Transport with Foam Under LPAT Conditions (Joint Project with TUDRP)'', (d) Progress report on the research project ''Study of Cuttings Transport with Aerated Muds Under LPAT Conditions (Joint Project with TUDRP)'', (e) Progress report on the research project ''Study of Foam Flow Behavior Under EPET Conditions'', (f) Progress report on the instrumentation tasks (Tasks 11 and 12) (g) Activities towards technology transfer and developing contacts with oil and service company members.

  20. Cutting assembly. [Patent application

    DOEpatents

    Treuhaft, M.B.; Oser, M.S.

    1981-06-25

    A mining auger comprises a cutting head carried at one end of a tubular shaft and a plurality of wall segments which in a first position thereof are disposed side by side around said shaft and in a second position thereof are disposed oblique to said shaft. A vane projects outwardly from each wall segment. When the wall segments are in their first position, the vanes together form a substantially continuous helical wall. A cutter is mounted on the peripheral edge of each of the vanes. When the wall segments are in their second position, the cutters on the vanes are disposed radially outward from the perimeter of the cutting head.

  1. Radial cutting torch

    SciTech Connect

    Robertson, M.C.

    1997-01-08

    The project`s aim is to complete development of the Radial Cutting Torch, a pyrotechnic cutter, for use in all downhole tubular cutting operations in the petroleum industry. Project objectives are to redesign and pressure test nozzle seals to increase product quality, reliability, and manufacturability; improve the mechanical anchor to increase its temperature tolerance and its ability to function in a wider variety of wellbore fluids; and redesign and pressure test the RCT nozzle for operation at pressures from 10 to 20 ksi. The proposal work statement is included in the statement of work for the grant via this reference.

  2. ADVANCED CUTTINGS TRANSPORT STUDY

    SciTech Connect

    Stefan Miska; Troy Reed; Ergun Kuru

    2004-09-30

    The Advanced Cuttings Transport Study (ACTS) was a 5-year JIP project undertaken at the University of Tulsa (TU). The project was sponsored by the U.S. Department of Energy (DOE) and JIP member companies. The objectives of the project were: (1) to develop and construct a new research facility that would allow three-phase (gas, liquid and cuttings) flow experiments under ambient and EPET (elevated pressure and temperature) conditions, and at different angle of inclinations and drill pipe rotation speeds; (2) to conduct experiments and develop a data base for the industry and academia; and (3) to develop mechanistic models for optimization of drilling hydraulics and cuttings transport. This project consisted of research studies, flow loop construction and instrumentation development. Following a one-year period for basic flow loop construction, a proposal was submitted by TU to the DOE for a five-year project that was organized in such a manner as to provide a logical progression of research experiments as well as additions to the basic flow loop. The flow loop additions and improvements included: (1) elevated temperature capability; (2) two-phase (gas and liquid, foam etc.) capability; (3) cuttings injection and removal system; (4) drill pipe rotation system; and (5) drilling section elevation system. In parallel with the flow loop construction, hydraulics and cuttings transport studies were preformed using drilling foams and aerated muds. In addition, hydraulics and rheology of synthetic drilling fluids were investigated. The studies were performed under ambient and EPET conditions. The effects of temperature and pressure on the hydraulics and cuttings transport were investigated. Mechanistic models were developed to predict frictional pressure loss and cuttings transport in horizontal and near-horizontal configurations. Model predictions were compared with the measured data. Predominantly, model predictions show satisfactory agreements with the measured data. As a

  3. Electron beam cutting

    DOEpatents

    Mochel, M.E.; Humphreys, C.J.

    1985-04-02

    A method for the cutting of holes 20 Angstroms in diameter, or lines 20 Angstroms wide in a material having positive ionic conduction by the use of a focused electron probe is described. The holes and lines are stable under ambient conditions. 2 figs.

  4. Electron beam cutting

    DOEpatents

    Mochel, Margaret E.; Humphreys, Colin J.

    1985-04-02

    A method for the cutting of holes 20 Angstroms in diameter, or lines 20 Angstroms wide in a material having positive ionic conduction by the use of a focused electron probe is described. The holes and lines are stable under ambient conditions.

  5. Kids Who Cut.

    ERIC Educational Resources Information Center

    Coy, Doris Rhea; Simpson, Chris

    2002-01-01

    Regardless of whether it is cutting, burning or some other form of self-harm, self-injury is a serious problem requiring serious solutions. This article reviews the various types of self-harm, descriptions of self-mutilators, common myths about self-mutilation, and effective treatment methods. (GCP)

  6. Think before You Cut

    ERIC Educational Resources Information Center

    Pettifor, Ann

    2010-01-01

    With the main political parties set on reducing public spending, one might be forgiven for supposing that "savage" cuts are the only way forward. However, the author believes there are alternatives, and that is why public education about the financial system is so important. Today, UK is trying to clear up a mess--a mess made by the greedy and…

  7. ADVANCED CUTTINGS TRANSPORT STUDY

    SciTech Connect

    Ergun Kuru; Stefan Miska; Nicholas Takach; Kaveh Ashenayi; Gerald Kane; Len Volk; Mark Pickell; Mike Volk; Barkim Demirdal; Affonso Lourenco; Evren Ozbayoglu; Paco Vieira; Neelima Godugu; Sri Suresh Kumar Thiroveedhula

    2000-04-30

    ACTS flow loop is now operational under elevated pressure and temperature. Currently, experiments with water under pressure and temperature are being conducted. Based on the analysis of Fann 70 data, empirical correlations defining the shear stress as a function of temperature, pressure and the shear rate have been developed for Petrobras synthetic drilling fluids. PVT equipment has been modified for testing Synthetic drilling fluids. Initial calibration tests have been conducted by using water. Currently, the base oil of the Petrobras synthetic drilling fluid is being tested. Foam flow experiments have been conducted. Currently, more experiments are being conducted while data are being analyzed to characterize the rheology of the foam. Cuttings transport experiments have been conducted using air, water and cuttings. Preliminary results have shown that it may not be possible to avoid cuttings bed deposition under any practical combination of air and water flow rates. Foam stability analyses have been conducted. Effects of salt and oil concentration on the foam stability have been investigated. A software for controlling the data sampling and data storage during cuttings monitoring process have been developed.

  8. Cuts endanger more services.

    PubMed

    Evans, Nick

    2016-06-01

    WHEN BARNSLEY council put out its tender for the 0-19 service last autumn, it laid down strict criteria. A ceiling of £4.8 million a year was put on any bids for the service, which incorporates school nursing teams and health visitors. That represented a cut of more than £1 million on the existing contract. PMID:27266736

  9. A Cut below

    ERIC Educational Resources Information Center

    Lum, Lydia

    2010-01-01

    Today, thousands of California students worry about vanishing college affordability and access, especially for historically under-represented and marginalized populations. The author reports on how students and faculty throughout California are grappling with the effects of draconian state cuts to postsecondary education that have topped more than…

  10. Cutting Cakes Carefully

    ERIC Educational Resources Information Center

    Hill, Theodore P.; Morrison, Kent E.

    2010-01-01

    This paper surveys the fascinating mathematics of fair division, and provides a suite of examples using basic ideas from algebra, calculus, and probability which can be used to examine and test new and sometimes complex mathematical theories and claims involving fair division. Conversely, the classical cut-and-choose and moving-knife algorithms…

  11. ADVANCED CUTTINGS TRANSPORT STUDY

    SciTech Connect

    Troy Reed; Stefan Miska; Nicholas Takach; Kaveh Ashenayi; Mark Pickell; Len Volk; Mike Volk; Lei Zhou; Zhu Chen; Crystal Redden; Aimee Washington

    2003-04-30

    Experiments on the flow loop are continuing. Improvements to the software for data acquisition are being made as additional experience with three-phase flow is gained. Modifications are being made to the Cuttings Injection System in order to improve control and the precision of cuttings injection. The design details for a drill-pipe Rotation System have been completed. A US Patent was filed on October 28, 2002 for a new design for an instrument that can generate a variety of foams under elevated pressures and temperatures and then transfer the test foam to a viscometer for measurements of viscosity. Theoretical analyses of cuttings transport phenomena based on a layered model is under development. Calibrations of two nuclear densitometers have been completed. Baseline tests have been run to determine wall roughness in the 4 different tests sections (i.e. 2-in, 3-in, 4-in pipes and 5.76-in by 3.5-in annulus) of the flow loop. Tests have also been conducted with aerated fluids at EPET conditions. Preliminary experiments on the two candidate aqueous foam formulations were conducted which included rheological tests of the base fluid and foam stability reports. These were conducted after acceptance of the proposal on the Study of Cuttings Transport with Foam Under Elevated Pressure and Elevated Temperature Conditions. Preparation of a test matrix for cuttings-transport experiments with foam in the ACTF is also under way. A controller for instrumentation to measure cuttings concentration and distribution has been designed that can control four transceivers at a time. A prototype of the control circuit board was built and tested. Tests showed that there was a problem with radiated noise. AN improved circuit board was designed and sent to an external expert to verify the new design. The new board is being fabricated and will first be tested with static water and gravel in an annulus at elevated temperatures. A series of viscometer tests to measure foam properties have

  12. Laser cutting nozzle

    DOEpatents

    Ramos, Terry J.

    1984-01-01

    A laser cutting nozzle for use with a laser cutting apparatus directing a focused beam to a spot on a work piece. The nozzle has a cylindrical body with a conical tip which together have a conically shaped hollow interior with the apex at a small aperture through the tip. The conical hollow interior is shaped to match the profile of the laser beam, at full beamwidth, which passes through the nozzle to the work piece. A plurality of gas inlet holes extend through the body to the hollow interior and are oriented to produce a swirling flow of gas coaxially through the nozzle and out the aperture, aligned with the laser beam, to the work piece. BACKGROUND OF THE INVENTION

  13. Laser cutting nozzle

    DOEpatents

    Ramos, T.J.

    1982-09-30

    A laser cutting nozzle for use with a laser cutting apparatus directing a focused beam to a spot on a work piece. The nozzle has a cylindrical body with a conical tip which together have a conically shaped hollow interior with the apex at a small aperture through the tip. The conical hollow interior is shaped to match the profile of the laser beam, at full beamwidth, which passes through the nozzle to the work piece. A plurality of gas inlet holes extend through the body to the hollow interior and are oriented to produce a swirling flow of gas coaxially through the nozzle and out the aperture, aligned with the laser beam, to the work piece.

  14. ADVANCED CUTTINGS TRANSPORT STUDY

    SciTech Connect

    Ergun Kuru; Stefan Miska; Nicholas Takach; Kaveh Ashenayi; Gerald Kane; Mark Pickell; Len Volk; Mike Volk; Barkim Demirdal; Affonso Lourenco; Evren Ozbayoglu; Paco Vieira; Neelima Godugu

    2000-07-30

    ACTS flow loop is now operational under elevated pressure and temperature. Currently, experiments with synthetic based drilling fluids under pressure and temperature are being conducted. Based on the analysis of Fann 70 data, empirical correlations defining the shear stress as a function of temperature, pressure and the shear rate have been developed for Petrobras synthetic drilling fluids. PVT equipment has been modified for testing Synthetic oil base drilling fluids. PVT tests with Petrobras Synthetic base mud have been conducted and results are being analyzed Foam flow experiments have been conducted and the analysis of the data has been carried out to characterize the rheology of the foam. Comparison of pressure loss prediction from the available foam hydraulic models and the test results has been made. Cuttings transport experiments in horizontal annulus section have been conducted using air, water and cuttings. Currently, cuttings transport tests in inclined test section are being conducted. Foam PVT analysis tests have been conducted. Foam stability experiments have also been conducted. Effects of salt and oil concentration on the foam stability have been investigated. Design of ACTS flow loop modification for foam and aerated mud flow has been completed. A flow loop operation procedure for conducting foam flow experiments under EPET conditions has been prepared Design of the lab-scale flow loop for dynamic foam characterization and cuttings monitoring instrumentation tests has been completed. The construction of the test loop is underway. As part of the technology transport efforts, Advisory Board Meeting with ACTS-JIP industry members has been organized on May 13, 2000.

  15. ADVANCED CUTTINGS TRANSPORT STUDY

    SciTech Connect

    Troy Reed; Stefan Miska; Nicholas Takach; Kaveh Ashenayi; Mark Pickell; Len Volk; Mike Volk; Lei Zhou; Zhu Chen; Crystal Redden; Aimee Washington

    2003-07-30

    This Quarter has been divided between running experiments and the installation of the drill-pipe rotation system. In addition, valves and piping were relocated, and three viewports were installed. Detailed design work is proceeding on a system to elevate the drill-string section. Design of the first prototype version of a Foam Generator has been finalized, and fabrication is underway. This will be used to determine the relationship between surface roughness and ''slip'' of foams at solid boundaries. Additional cups and rotors are being machined with different surface roughness. Some experiments on cuttings transport with aerated fluids have been conducted at EPET. Theoretical modeling of cuttings transport with aerated fluids is proceeding. The development of theoretical models to predict frictional pressure losses of flowing foam is in progress. The new board design for instrumentation to measure cuttings concentration is now functioning with an acceptable noise level. The ultrasonic sensors are stable up to 190 F. Static tests with sand in an annulus indicate that the system is able to distinguish between different sand concentrations. Viscometer tests with foam, generated by the Dynamic Test Facility (DTF), are continuing.

  16. Reagan Administration Prepares Budget Cuts.

    ERIC Educational Resources Information Center

    Norman, Colin

    1981-01-01

    Describes tentative federal budget cuts affecting science education in the National Science Foundation, National Aeronautics and Space Administration, Department of Energy, National Institutes of Health, and the specific areas these budget cuts will affect. (DS)

  17. Dealing with Cuts (For Parents)

    MedlinePlus

    ... pus. For Bleeding From a Large Cut or Laceration: Wash the wound thoroughly with water. This will ... immediate medical attention for all large cuts or lacerations, or if: you're unable to stop the ...

  18. Drilling cost-cutting

    SciTech Connect

    Capuano, L.E. Jr.

    1996-12-31

    This presentation by Louis E. Capuano, Jr., President, ThermaSource, Inc., discusses cost-cutting in the drilling phase of geothermal energy exploration and production. All aspects of a geothermal project including the drilling must be streamlined to make it viable and commercial. If production could be maximized from each well, there would be a reduction in drilling costs. This could be achieved in several ways, including big hole and multi-hole completion, directional drilling, better knowledge of the resource and where to penetrate, etc.

  19. Cutting the Cord

    NASA Technical Reports Server (NTRS)

    2004-01-01

    This animation shows the view from the front hazard avoidance cameras on the Mars Exploration Rover Spirit as the rover turns 45 degrees clockwise. This maneuver is the first step in a 3-point turn that will rotate the rover 115 degrees to face west. The rover must make this turn before rolling off the lander because airbags are blocking it from exiting off the front lander petal. Before this crucial turn could take place, engineers instructed the rover to cut the final cord linking it to the lander. The turn took around 30 minutes to complete.

  20. Cross-Cutting Faults

    NASA Technical Reports Server (NTRS)

    2005-01-01

    16 May 2005 This Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) image shows cross-cutting fault scarps among graben features in northern Tempe Terra. Graben form in regions where the crust of the planet has been extended; such features are common in the regions surrounding the vast 'Tharsis Bulge' on Mars.

    Location near: 43.7oN, 90.2oW Image width: 3 km (1.9 mi) Illumination from: lower left Season: Northern Summer

  1. Cutting the Cord-2

    NASA Technical Reports Server (NTRS)

    2004-01-01

    This animation shows the view from the rear hazard avoidance cameras on the Mars Exploration Rover Spirit as the rover turns 45 degrees clockwise. This maneuver is the first step in a 3-point turn that will rotate the rover 115 degrees to face west. The rover must make this turn before rolling off the lander because airbags are blocking it from exiting from the front lander petal. Before this crucial turn took place, engineers instructed the rover to cut the final cord linking it to the lander. The turn took around 30 minutes to complete.

  2. ADVANCED CUTTINGS TRANSPORT STUDY

    SciTech Connect

    Stefan Miska; Nicholas Takach; Kaveh Ashenayi

    2004-07-31

    We have tested the loop elevation system. We raised the mast to approximately 25 to 30 degrees from horizontal. All went well. However, while lowering the mast, it moved laterally a couple of degrees. Upon visual inspection, severe spalling of the concrete on the face of the support pillar, and deformation of the steel support structure was observed. At this time, the facility is ready for testing in the horizontal position. A new air compressor has been received and set in place for the ACTS test loop. A new laboratory has been built near the ACTS test loop Roughened cups and rotors for the viscometer (RS300) were obtained. Rheologies of aqueous foams were measured using three different cup-rotor assemblies that have different surface roughness. The relationship between surface roughness and foam rheology was investigated. Re-calibration of nuclear densitometers has been finished. The re-calibration was also performed with 1% surfactant foam. A new cuttings injection system was installed at the bottom of the injection tower. It replaced the previous injection auger. A mechanistic model for cuttings transport with aerated mud has been developed. Cuttings transport mechanisms with aerated water at various conditions were experimentally investigated. A total of 39 tests were performed. Comparisons between the model predictions and experimental measurements show a satisfactory agreement. Results from the ultrasonic monitoring system indicated that we could distinguish between different sand levels. We also have devised ways to achieve consistency of performance by securing the sensors in the caps in exactly the same manner as long as the sensors are not removed from the caps. A preliminary test was conducted on the main flow loop at 100 gpm flow rate and 20 lb/min cuttings injection rate. The measured bed thickness using the ultrasonic method showed a satisfactory agreement with nuclear densitometer readings. Thirty different data points were collected after the test

  3. Photochemical cutting of fabrics

    DOEpatents

    Piltch, Martin S.

    1994-01-01

    Apparatus for the cutting of garment patterns from one or more layers of fabric. A laser capable of producing laser light at an ultraviolet wavelength is utilized to shine light through a pattern, such as a holographic phase filter, and through a lens onto the one or more layers of fabric. The ultraviolet laser light causes rapid photochemical decomposition of the one or more layers of fabric, but only along the pattern. The balance of the fabric of the one or more layers of fabric is undamaged.

  4. Cutting with diamond wire: Cutting procedures and suggested uses

    NASA Astrophysics Data System (ADS)

    McLaughlin, H. B.

    Diamond impregnated wire is the most versatile cutting tool yet devised. When a wire is properly charged with diamond particles and is drawn back and forth over a material surface, it does a remarkable cutting job. In a number of cases, wire sawing is the only way to perform these operations successfully: (1) for materials which are so fragile that other means of cutting will cause breakage, damage to crystal structure or otherwise impair the specimens, often rendering them useless, (2) for cutting materials which are so expensive that kerf loss becomes a major factor, a wire of the proper diameter with carefully graded diamonds, results in the minimum loss of material, (3) for cutting materials which may be damaged by the frictional heat generated by the high speed abrasive wheels, band saws and other cutting devices, causing hair cracks and craze.

  5. Making the cut

    PubMed Central

    Millard, Chris

    2013-01-01

    ‘Deliberate self-harm’, ‘self-mutilation’ and ‘self-injury’ are just some of the terms used to describe one of the most prominent issues in British mental health policy in recent years. This article demonstrates that contemporary literature on ‘self-harm’ produces this phenomenon (to varying extents) around two key characteristics. First, this behaviour is predominantly performed by those identified as female. Second, this behaviour primarily involves cutting the skin. These constitutive characteristics are traced back to a corpus of literature produced in the 1960s and 1970s in North American psychiatric inpatient institutions; analysis shows how pre-1960 works were substantially different. Finally, these gendered and behavioural assertions are shown to be the result of historically specific processes of exclusion and emphasis. PMID:23741086

  6. ADVANCED CUTTINGS TRANSPORT STUDY

    SciTech Connect

    Stefan Miska; Nicholas Takach; Kaveh Ashenayi

    2004-01-31

    Final design of the mast was completed (Task 5). The mast is consisting of two welded plate girders, set next to each other, and spaced 14-inches apart. Fabrication of the boom will be completed in two parts solely for ease of transportation. The end pivot connection will be made through a single 2-inch diameter x 4 feet-8 inch long 316 SS bar. During installation, hard piping make-ups using Chiksan joints will connect the annular section and 4-inch return line to allow full movement of the mast from horizontal to vertical. Additionally, flexible hoses and piping will be installed to isolate both towers from piping loads and allow recycling operations respectively. Calibration of the prototype Foam Generator Cell has been completed and experiments are now being conducted. We were able to generate up to 95% quality foam. Work is currently underway to attach the Thermo-Haake RS300 viscometer and install a view port with a microscope to measure foam bubble size and bubble size distribution. Foam rheology tests (Task 13) were carried out to evaluate the rheological properties of the proposed foam formulation. After successful completion of the first foam test, two sets of rheological tests were conducted at different foam flow rates while keeping other parameters constant (100 psig, 70F, 80% quality). The results from these tests are generally in agreement with the previous foam tests done previously during Task 9. However, an unanticipated observation during these tests was that in both cases, the frictional pressure drop in 2 inch pipe was lower than that in the 3 inch and 4 inch pipes. We also conducted the first foam cuttings transport test during this quarter. Experiments on aerated fluids without cuttings have been completed in ACTF (Task 10). Gas and liquid were injected at different flow rates. Two different sets of experiments were carried out, where the only difference was the temperature. Another set of tests was performed, which covered a wide range of

  7. Vortex cutting in superconductors

    NASA Astrophysics Data System (ADS)

    Glatz, A.; Vlasko-Vlasov, V. K.; Kwok, W. K.; Crabtree, G. W.

    2016-08-01

    Vortex cutting and reconnection is an intriguing and still-unsolved problem central to many areas of classical and quantum physics, including hydrodynamics, astrophysics, and superconductivity. Here, we describe a comprehensive investigation of the crossing of magnetic vortices in superconductors using time dependent Ginsburg-Landau modeling. Within a macroscopic volume, we simulate initial magnetization of an anisotropic high temperature superconductor followed by subsequent remagnetization with perpendicular magnetic fields, creating the crossing of the initial and newly generated vortices. The time resolved evolution of vortex lines as they approach each other, contort, locally conjoin, and detach, elucidates the fine details of the vortex-crossing scenario under practical situations with many interacting vortices in the presence of weak pinning. Our simulations also reveal left-handed helical vortex instabilities that accompany the remagnetization process and participate in the vortex crossing events.

  8. Cross-Cutting Relationships

    NASA Technical Reports Server (NTRS)

    2003-01-01

    [figure removed for brevity, see original site]

    Released 25 August 2003

    The several linear cross-cutting grabens and collapse features observed in this THEMIS image illustrate the relative timing of a series of complex geologic processes as more recent events produce features that overlap and intersect older ones. Some impact craters are observed to be cut grabens, suggesting an older impact event compared to impact craters that appear fresh and unmodified.

    Image information: VIS instrument. Latitude 14.1, Longitude 236.3 East (123.7 West). 19 meter/pixel resolution.

    Note: this THEMIS visual image has not been radiometrically nor geometrically calibrated for this preliminary release. An empirical correction has been performed to remove instrumental effects. A linear shift has been applied in the cross-track and down-track direction to approximate spacecraft and planetary motion. Fully calibrated and geometrically projected images will be released through the Planetary Data System in accordance with Project policies at a later time.

    NASA's Jet Propulsion Laboratory manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington, D.C. The Thermal Emission Imaging System (THEMIS) was developed by Arizona State University, Tempe, in collaboration with Raytheon Santa Barbara Remote Sensing. The THEMIS investigation is led by Dr. Philip Christensen at Arizona State University. Lockheed Martin Astronautics, Denver, is the prime contractor for the Odyssey project, and developed and built the orbiter. Mission operations are conducted jointly from Lockheed Martin and from JPL, a division of the California Institute of Technology in Pasadena.

  9. Corner-cutting mining assembly

    DOEpatents

    Bradley, John A.

    1983-01-01

    A mining assembly includes a primary rotary cutter mounted on one end of a support shaft and four secondary rotary cutters carried on the same support shaft and positioned behind the primary cutters for cutting corners in the hole cut by the latter.

  10. Cutting and Self-Harm

    MedlinePlus

    ... sad Cutting and self-harm Cutting and self-harm Self-harm, sometimes called self-injury, is when a person ... about how one girl helps herself not self-harm. What are signs of self-injury in others? ...

  11. Cutting Head for Ultrasonic Lithotripsy

    NASA Technical Reports Server (NTRS)

    Angulo, Earl D. (Inventor); Goodfriend, Roger (Inventor)

    1989-01-01

    A cutting head for attachment to the end of the wire probe of an ultrasonic kidney stone disintegration instrument. The cutting head has a plurality of circumferentially arranged teeth formed at one end thereof to provide a cup-shaped receptacle for kidney stones encountered during the disintegration procedure. An integral reduced diameter collar diminishes stress points in the wire and reduces breakage thereof.

  12. Tubing and cable cutting tool

    NASA Technical Reports Server (NTRS)

    Mcsmith, D. D.; Richardson, J. I. (Inventor)

    1984-01-01

    A hand held hydraulic cutting tool was developed which is particularly useful in deactivating ejection seats in military aircraft rescue operations. The tool consists primarily of a hydraulic system composed of a fluid reservoir, a pumping piston, and an actuator piston. Mechanical cutting jaws are attached to the actuator piston rod. The hydraulic system is controlled by a pump handle. As the pump handle is operated the actuator piston rod is forced outward and thus the cutting jaws are forced together. The frame of the device is a flexible metal tubing which permits easy positioning of the tool cutting jaws in remote and normally inaccessible locations. Bifurcated cutting edges ensure removal of a section of the tubing or cable to thereby reduce the possibility of accidental reactivation of the tubing or cable being severed.

  13. Cutting Force Control Applying Sensorless Cutting Force Monitoring Method

    NASA Astrophysics Data System (ADS)

    Kurihara, Daisuke; Kakinuma, Yasuhiro; Katsura, Seiichiro

    Intelligent machine tools require the functions of high-accurate process monitoring and adaptive control to fit the optimum process condition in each workpieces. For realizing these functions, the various techniques to monitor the cutting process and control it using additional sensors have been proposed and widely studied. Authors propose the sensorless cutting force control method using parallel disturbance observer. The performance of our proposed method is evaluated through simulation and experiments using a linear motor driving table.

  14. Laser cutting of energetic materials

    SciTech Connect

    Rivera, T.; Muenchausen, R.; Sanchez, J.

    1998-12-01

    The authors have demonstrated the feasibility of safely and efficiently cutting and drilling metal cases containing a variety of high explosives (HE) using a Nd:YAG laser. Spectral analysis of the optical emission, occurring during the laser-induced ablation process, is used to identify the removed material. By monitoring changes in the optical emission during the cutting process, the metal-He interface can be observed in real time and the cutting parameters adjusted accordingly. For cutting the HE material itself, the authors have demonstrated that this can be safely and efficiently accomplished by means of a ultraviolet (UV) laser beam obtained from the same Nd:YAG laser using the third or fourth harmonics. They are currently applying this technology to UXO identification and ordnance demilitarization.

  15. Cutting thin sections of bone

    NASA Technical Reports Server (NTRS)

    Ashley, W. W.

    1972-01-01

    Medical equipment for obtaining repetitive planoparallel sections of bone to study healing of bone structure under high gravity stress is described. Device consists of modified saw with diamond cutting edges. Construction of device and manner of use are explained.

  16. Refrigerated cutting tools improve machining of superalloys

    NASA Technical Reports Server (NTRS)

    Dudley, G. M.

    1971-01-01

    Freon-12 applied to tool cutting edge evaporates quickly, leaves no residue, and permits higher cutting rate than with conventional coolants. This technique increases cutting rate on Rene-41 threefold and improves finish of machined surface.

  17. Interactive cutting path analysis programs

    NASA Technical Reports Server (NTRS)

    Weiner, J. M.; Williams, D. S.; Colley, S. R.

    1975-01-01

    The operation of numerically controlled machine tools is interactively simulated. Four programs were developed to graphically display the cutting paths for a Monarch lathe, Cintimatic mill, Strippit sheet metal punch, and the wiring path for a Standard wire wrap machine. These programs are run on a IMLAC PDS-ID graphic display system under the DOS-3 disk operating system. The cutting path analysis programs accept input via both paper tape and disk file.

  18. Microwave assisted hard rock cutting

    DOEpatents

    Lindroth, David P.; Morrell, Roger J.; Blair, James R.

    1991-01-01

    An apparatus for the sequential fracturing and cutting of subsurface volume of hard rock (102) in the strata (101) of a mining environment (100) by subjecting the volume of rock to a beam (25) of microwave energy to fracture the subsurface volume of rock by differential expansion; and , then bringing the cutting edge (52) of a piece of conventional mining machinery (50) into contact with the fractured rock (102).

  19. Cutting head for ultrasonic lithotripsy

    NASA Technical Reports Server (NTRS)

    Anguluo, E. D.; Goodfriend, R. (Inventor)

    1985-01-01

    A cutting head for attachment to the end of the wire probe of an ultrasonic kidney stone disintegration instrument is described. The cutting head has a plurality of circumferentially arranged teeth formed at one end thereof to provide a cup shaped receptacle for kidney stones encountered during the disintegration procedure. An integral reduced diameter collar diminishes stress points in the wire and reduce breakage thereof.

  20. EPA rule could cut pollutants

    NASA Astrophysics Data System (ADS)

    Showstack, Randy

    The U.S. Environmental Protection Agency issued a rule on November 14 that it claims could nearly eliminate dioxin discharges into waterways and reduce other toxic pollutants into the air and water from 155 pulp and paper mills.EPA estimates that results will include a 96% reduction in dioxin and a nearly 60% reduction in toxic air pollutants. Also, volatile organic compounds and sulfur emissions could be cut in half, with particulate matter cut by 37%.

  1. Underwater welding, cutting and inspection

    SciTech Connect

    Tsai, C.L. . Ohio Underwater Welding Center)

    1995-02-01

    Underwater welding, cutting and inspection of offshore, inland waterway and port facilities are becoming a requirement for both military and industrial communities, as maintenance and repair costs continue to escalate, and as many of the facilities are in operation well beyond their intended design life. In nuclear applications, underwater welding, cutting and inspection for repair and modification of irradiated nuclear power plant components are also a requirement. This article summarizes recent developments in this emerging underwater technology.

  2. Economic technology of laser cutting

    NASA Astrophysics Data System (ADS)

    Fedin, Alexander V.; Shilov, Igor V.; Vassiliev, Vladimir V.; Malov, Dmitri V.; Peskov, Vladimir N.

    2000-02-01

    The laser cutting of color metals and alloys by a thickness more than 2 mm has significant difficulties due to high reflective ability and large thermal conduction. We made it possible to raise energy efficiency and quality of laser cutting by using a laser processing system (LPS) consisting both of the YAG:Nd laser with passive Q-switching on base of LiF:F2- crystals and the CO2 laser. A distinctive feature of the LPS is that the radiation of different lasers incorporated in a coaxial beam has simultaneously high level of peak power (more than 400 kW in a TEM00 mode) and significant level of average power (up to 800 W in a TEM01 mode of the CO2 laser). The application of combined radiation for cutting of an aluminum alloy of D16 type made it possible to decrease the cutting energy threshold in 1.7 times, to increase depth of treatment from 2 up to 4 mm, and velocity from 0.015 up to 0.7 m/min, and also to eliminate application of absorptive coatings. At cutting of steels the velocity of treatment was doubled, and also an oxygen flow was eliminated from the technological process and replaced by the air. The obtained raise of energy efficiency and quality of cutting is explained by an essential size reducing of a formed penetration channel and by the shifting of a thermal cutting mode from melting to evaporation. The evaluation of interaction efficiency of a combined radiation was produced on the basis of non-stationary thermal-hydrodynamic model of a heating source moving as in the cutting direction, and also into the depth of material.

  3. Apparatus for washing drill cuttings

    SciTech Connect

    Lott, W. G.

    1985-10-15

    An apparatus for cleansing a stream of drilling fluid fouled drill cuttings having a housing divided into a plurality of compartments each designed to retain cleansing fluid. A spinning force is imparted into the incoming fouled drill cuttings in an inlet chamber wherein cleansing fluid is intimately mixed with the fouled drill cuttings. A decanting chamber removes liberated drilling fluid from the cuttings and disposes of such drilling fluid from the apparatus via a drain trough assembly. The underflow from the decanter is passed through a solids concentrating assembly wherein the coarse solids are deposited in a concentrating assembly bottoms chamber wherein the settled drill cuttings are removed from the apparatus. The overhead stream from the solids concentrating assembly is driected to a second decanter for removal of any remaining drilling fluid and fine drill cuttings entrained therein from the apparatus via the drain trough assembly. The remaining fluid in the concentrating assembly bottoms chamber is recirculated to the second decanting chamber and the inlet chamber.

  4. Cutting inlays with a laser

    NASA Astrophysics Data System (ADS)

    Swaczyna, Irena; Grabczewski, Zbigniew

    1995-03-01

    To cut inlay from a stack of glued veneer a CO2 HEBAR-1A laser was used. For setting optimal working parameters of the set used in industrial production of inlay the following elements were defined: the shape and dimensions of the cutting fissure, the dependence between the width of the cutting fissure and the speed with which the laser beam moves and the total thickness of the stack of veneer sheets, the application of the laser for cutting various patterns. Computer aided designing and computer steering of the laser beam enables fast and precise production of large numbers of inlay elements not only from wood but also from other materials like glass, stone, metal, etc. Taking into consideration the high running cost of such a laser set and its very big production only few factories or even one factory in the given area could produce inlay ready for gluing. Further investigation should be carried out on this field particularly considering the lowering of costs not only in inlay production but generally where cutting of wood is concerned.

  5. The Nichols Wing Cutting Equipment

    NASA Technical Reports Server (NTRS)

    Ford, James B

    1923-01-01

    Described here is wing cutting equipment for the economical production of metal wings for wind tunnel models. The machine will make any size of constant-section wing or strut up to one-sixth inch chord by 36-inch span and up to a thickness of one and one-quarter inches. It cuts a smooth, true model that is accurate to within two-thousandths of an inch on any ordinate. The holding jaws are so designed as to leave the model free of chip marks, and the only hand finishing necessary after the cutting is a rub with amunite to remove burrs. The actual change on ordinate in this finishing rub is less than .0002 inches.

  6. Haptic feedback for multilayer cutting.

    PubMed

    Rianto, Sugeng; Li, Ling; Hartley, Bruce

    2008-01-01

    An approach in effectively estimating the force feedback for a tactile haptic based on multi-proxy rendering for 3D surface cuttings for a virtual surgery simulation is described in this paper. The force-models representing haptic force-feedback are approximated using D'Alembert's principle in the mechanic case of spring-damper-stiffness interaction of the surfaces. We also propose a combination between mesh refinement and adaptive re-meshing to create a progressive cutting over the layering surfaces. Experimental results prove that the physical interaction to create cutting paths over the multilayer surfaces can be deliver smoothly with haptic in real time with 3D visual stereo on a PC.

  7. Stresses in ultrasonically assisted bone cutting

    NASA Astrophysics Data System (ADS)

    Alam, K.; Mitrofanov, A. V.; Bäker, M.; Silberschmidt, V. V.

    2009-08-01

    Bone cutting is a frequently used procedure in the orthopaedic surgery. Modern cutting techniques, such as ultrasonic assisted drilling, enable surgeons to perform precision operations in facial and spinal surgeries. Advanced understanding of the mechanics of bone cutting assisted by ultrasonic vibration is required to minimise bone fractures and to optimise the technique performance. The paper presents results of finite element simulations on ultrasonic and conventional bone cutting analysing the effects of ultrasonic vibration on cutting forces and stress distribution. The developed model is used to study the effects of cutting and vibration parameters (e.g. amplitude and frequency) on the stress distributions in the cutting region.

  8. Hypervelocity cutting machine and method

    DOEpatents

    Powell, James R.; Reich, Morris

    1996-11-12

    A method and machine 14 are provided for cutting a workpiece 12 such as concrete. A gun barrel 16 is provided for repetitively loading projectiles 22 therein and is supplied with a pressurized propellant from a storage tank 28. A thermal storage tank 32,32A is disposed between the propellant storage tank 28 and the gun barrel 16 for repetitively receiving and heating propellant charges which are released in the gun barrel 16 for repetitively firing projectiles 22 therefrom toward the workpiece 12. In a preferred embodiment, hypervelocity of the projectiles 22 is obtained for cutting the concrete workpiece 12 by fracturing thereof.

  9. Hypervelocity cutting machine and method

    DOEpatents

    Powell, J.R.; Reich, M.

    1996-11-12

    A method and machine are provided for cutting a workpiece such as concrete. A gun barrel is provided for repetitively loading projectiles therein and is supplied with a pressurized propellant from a storage tank. A thermal storage tank is disposed between the propellant storage tank and the gun barrel for repetitively receiving and heating propellant charges which are released in the gun barrel for repetitively firing projectiles therefrom toward the workpiece. In a preferred embodiment, hypervelocity of the projectiles is obtained for cutting the concrete workpiece by fracturing thereof. 10 figs.

  10. Microbiopsy/precision cutting devices

    DOEpatents

    Krulevitch, Peter A.; Lee, Abraham P.; Northrup, M. Allen; Benett, William J.

    1999-01-01

    Devices for performing tissue biopsy on a small scale (microbiopsy). By reducing the size of the biopsy tool and removing only a small amount of tissue or other material in a minimally invasive manner, the risks, costs, injury and patient discomfort associated with traditional biopsy procedures can be reduced. By using micromachining and precision machining capabilities, it is possible to fabricate small biopsy/cutting devices from silicon. These devices can be used in one of four ways 1) intravascularly, 2) extravascularly, 3) by vessel puncture, and 4) externally. Additionally, the devices may be used in precision surgical cutting.

  11. Microbiopsy/precision cutting devices

    DOEpatents

    Krulevitch, P.A.; Lee, A.P.; Northrup, M.A.; Benett, W.J.

    1999-07-27

    Devices are disclosed for performing tissue biopsy on a small scale (microbiopsy). By reducing the size of the biopsy tool and removing only a small amount of tissue or other material in a minimally invasive manner, the risks, costs, injury and patient discomfort associated with traditional biopsy procedures can be reduced. By using micromachining and precision machining capabilities, it is possible to fabricate small biopsy/cutting devices from silicon. These devices can be used in one of four ways (1) intravascularly, (2) extravascularly, (3) by vessel puncture, and (4) externally. Additionally, the devices may be used in precision surgical cutting. 6 figs.

  12. Document segmentation via oblique cuts

    NASA Astrophysics Data System (ADS)

    Svendsen, Jeremy; Branzan-Albu, Alexandra

    2013-01-01

    This paper presents a novel solution for the layout segmentation of graphical elements in Business Intelligence documents. We propose a generalization of the recursive X-Y cut algorithm, which allows for cutting along arbitrary oblique directions. An intermediate processing step consisting of line and solid region removal is also necessary due to presence of decorative elements. The output of the proposed segmentation is a hierarchical structure which allows for the identification of primitives in pie and bar charts. The algorithm was tested on a database composed of charts from business documents. Results are very promising.

  13. Model aids cuttings transport prediction

    SciTech Connect

    Gavignet, A.A. ); Sobey, I.J. )

    1989-09-01

    Drilling of highly deviated wells can be complicated by the formation of a thick bed of cuttings at low flow rates. The model proposed in this paper shows what mechanisms control the thickness of such a bed, and the model predictions are compared with experimental results.

  14. Cuts to science spending spared

    NASA Astrophysics Data System (ADS)

    Federal science funding was one area spared further cuts over the next 5 years when the House rejected the Penny-Kasich Deficit Plan by a vote of 219-213 on November 22. Known for its two House cosponsors Timothy Penny (D-Minn.) and John Kasich (R-Ohio), the plan called for additional cuts of $103 billion in federal spending over 5 years. The proposal was an amendment to HR3400, Clinton's spending-reduction bill, which would cut federal spending by over $11 billion in the next 5 years. HR3400 was passed by the House during the same vote.In addition to savings from President Clinton's plan to reduce the federal work force by 252,000, the Penny-Kasich amendment offered ninety proposals to cut federal spending. One of the major policy changes called for was the merging of the Departments of Energy and Commerce, NASA, the National Science Foundation, and the Office of Science and Technology Policy into a new Department of Science. This consolidation, said the plan's sponsors, “could result in $1 billion of reduced spending due to administrative consolidation and elimination of programmatic duplication.”

  15. Automated internal pipe cutting device

    DOEpatents

    Godlewski, William J.; Haffke, Gary S.; Purvis, Dale; Bashar, Ronald W.; Jones, Stewart D.; Moretti, Jr., Henry; Pimentel, James

    2003-01-21

    The invention is a remotely controlled internal pipe cutting device primarily used for cutting pipes where the outside of the pipe is inaccessible at the line where the cut is to be made. The device includes an axial ram within a rotational cylinder which is enclosed in a housing. The housing is adapted for attachment to an open end of the pipe and for supporting the ram and cylinder in cantilever fashion within the pipe. A radially movable cutter, preferably a plasma arc torch, is attached to the distal end of the ram. A drive mechanism, containing motors and mechanical hardware for operating the ram and cylinder, is attached to the proximal end of the housing. The ram and cylinder provide for moving the cutter axially and circumferentially, and a cable assembly attached to a remote motor provide for the movement of the cutter radially, within the pipe. The control system can be adjusted and operated remotely to control the position and movement of the cutter to obtain the desired cut. The control system can also provide automatic standoff control for a plasma arc torch.

  16. X-Z-Theta cutting method

    DOEpatents

    Bieg, L.F.

    1993-01-12

    A method for machining a workpiece. The method includes the use of a rotary cutting tool mounted on the end of a movable arm. The arm is adapted to move in a plane perpendicular to the axis of rotation of the cutting tool. The cutting tool has cutting teeth to cut chips of material off of the workpiece in a predetermined size and shape to facilitate better removal of the chips from the workpiece. The teeth can be of different type and length to permit the tool to both rough cut and finish cut the workpiece during machining. The total depth of cut is divided by the number of tool teeth, so that the longest tool always performs the finishing cut.

  17. Knife and impact cutting of lamb bone.

    PubMed

    King, M J

    1999-05-01

    The forces and hence fracture energies required to cut bone are presented in this paper and the merits of cutting with a high speed blade are considered. A plain knife blade was used to cut cancellous and compact lamb bone using three different methods. A microtome was used to produce a range of cut thicknesses which enabled the fracture energy to be separated into friction, surface fracture and plastic deformation energies. A tensile test machine was used to produce thicker off-cuts so that the energy required to cut through full sections of bone could be determined. A high speed rail gun was used to cut at speeds up to 130 m/s. The energy required to cut bone did not change with blade speed. However, the energies measured during the cutting varied over a wide range. In situations in which the surface of the cut bone exhibited a very uneven surface high energy was required, whereas when the resulting cut surface was planar the cutting energy was low. A light weight blade which impacts the bone at high speed will transmit a small impulse to the carcass which may be absorbed without transmitting strain to the muscle/connective tissue. This may allow the development of a high speed knife which will cut bone without excessively damaging the meat surrounding the cut. PMID:22062140

  18. Measurement of Cut Front Properties in Laser Cutting

    NASA Astrophysics Data System (ADS)

    Thombansen, Ulrich; Hermanns, Torsten; Molitor, Thomas; Pereira, Milton; Schulz, Wolfgang

    Cut-front properties are a key variable in laser-cutting and thus of major importance for self-optimization. Within the Cluster of Excellence at RWTH Aachen University, several achievements were made in setting up sensor-systems that provide information on the operating-point of this melt-based manufacturing process. These achievements contribute to a gradual increase in system-transparency which is seen as an enabler for self-optimization. Instead of searching for a single measurand to characterize the course of the process, an approach is being presented which establishesa surrogate criterion to allow determination of the current operating-point. In the depicted area, this is done by joining sources of information from process observation, determining boundary-conditions such as actual feed-rate and modeling of process-variables. Although process-variables like properties of the cutting-front are influenced through more than one process parameter, a concept for a sensor-system is reported showing the correlation between properties of the melt-front and the current feed-rate. The results are compared to a solution derived from process-simulation.

  19. Cutting

    MedlinePlus

    ... for Parents for Kids for Teens Teens Home Body Mind Sexual Health Food & Fitness Diseases & Conditions Infections Q& ... to do. But you can't get your mind off feeling upset, and your body has this knot of emotional pain. Before you ...

  20. Laser Cutting of Thin Nickel Bellows

    NASA Technical Reports Server (NTRS)

    Butler, C. L.

    1986-01-01

    Laser cutting technique produces narrow, precise, fast, and repeatable cuts in thin nickel-allow bellows material. Laser cutting operation uses intense focused beam to melt material and assisting gas to force melted material through part thickness, creating void. When part rotated or moved longitudinally, melting and material removal continuous and creates narrow, fast, precise, and repeatable cut. Technique used to produce cuts of specified depths less than material thickness. Avoids distortion, dents, and nicks produced in delicate materials during lathe trimming operations, which require high cutting-tool pressure and holding-fixture forces.

  1. CO2 laser cutting of natural granite

    NASA Astrophysics Data System (ADS)

    Riveiro, A.; Mejías, A.; Soto, R.; Quintero, F.; del Val, J.; Boutinguiza, M.; Lusquiños, F.; Pardo, J.; Pou, J.

    2016-01-01

    Commercial black granite boards (trade name: "Zimbabwe black granite") 10 mm thick, were successfully cut by a 3.5 kW CO2 laser source. Cutting quality, in terms of kerf width and roughness of the cut wall, was assessed by means of statistically planned experiments. No chemical modification of the material in the cutting walls was detected by the laser beam action. Costs associated to the process were calculated, and the main factors affecting them were identified. Results reported here demonstrate that cutting granite boards could be a new application of CO2 laser cutting machines provided a supersonic nozzle is used.

  2. Reservoir management cost-cutting

    SciTech Connect

    Gulati, M.S.

    1996-12-31

    This article by Mohinder S. Gulati, Chief Engineer, Unocal Geothermal Operations, discusses cost cutting in geothermal reservoir management. The reservoir engineer or geoscientist can make a big difference in the economical outcome of a project by improving well performance and thus making geothermal energy more competitive in the energy marketplace. Bringing plants online in less time and proving resources to reduce the cycle time are some of the ways to reduce reservoir management costs discussed in this article.

  3. Drill cuttings mount formation study

    NASA Astrophysics Data System (ADS)

    Teh, Su Yean; Koh, Hock Lye

    2014-07-01

    Oil, Gas and Energy sector has been identified as an essential driving force in the Malaysian Economic Transformation Programs (ETP). Recently confirmed discovery of many offshore oil and gas deposits in Malaysian waters has ignited new confidence in this sector. However, this has also spurred intense interest on safeguarding the health and environment of coastal waters in Malaysia from adverse impact resulting from offshore oil and gas production operation. Offshore discharge of spent drilling mud and rock cuttings is the least expensive and simplest option to dispose of large volumes of drilling wastes. But this onsite offshore disposal may have adverse environmental impacts on the water column and the seabed. It may also pose occupational health hazards to the workers living in the offshore platforms. It is therefore important to model the transport and deposition of drilling mud and rock cuttings in the sea to enable proper assessment of their adverse impacts on the environment and the workers. Further, accumulation of drill particles on the seabed may impede proper operation of pipelines on the seabed. In this paper, we present an in-house application model TUNA-PT developed to cater to local oil and gas industry needs to simulate the dispersion and mount formation of drill cuttings by offshore oil and gas exploration and production platforms. Using available data on Malaysian coastal waters, simulation analyses project a pile formation on the seabed with a maximum height of about 1 m and pile radius of around 30 to 50 m. Simulated pile heights are not sensitive to the heights of release of the cuttings as the sensitivity has been mitigated by the depth of water.

  4. Eliminate Sweetened Drinks, Cut Kids' Sugar Intake

    MedlinePlus

    ... fullstory_161163.html Eliminate Sweetened Drinks, Cut Kids' Sugar Intake Average U.S. child consumes about 80 grams ... Looking for the quickest way to cut added sugar from your kid's diet? Eliminate sugar-sweetened drinks, ...

  5. Aqueous cutting fluid for machining fissionable materials

    DOEpatents

    Duerksen, Walter K.; Googin, John M.; Napier, Jr., Bradley

    1984-01-01

    The present invention is directed to a cutting fluid for machining fissionable material. The cutting fluid is formed of glycol, water and boron compound in an adequate concentration for effective neutron attenuation so as to inhibit criticality incidents during machining.

  6. Cutting Forces Analysis in Whirling Process

    NASA Astrophysics Data System (ADS)

    Son, Jae Hwan; Han, Chang Woo; Kim, Sun Il; Jung, Hee Chul; Lee, Young Moon

    Whirling is a cutting process in which a series of cutting edges remove material by turning over the rotating workpiece. In this process, the whirling ring with a number of cutting teeth combined with the rotation and advancement of workpiece, produces pitches of worm. Mechanics of chip formation of the process, however, has not been fully estabilished. To estimate the cutting force during the process, the kinematics and the maximum undeformed chip thickness to be removed by each cutting edge should be thoroughly analyzed. In this study, using the recently developed model of undeformed chip thickness and the DEFORM software, cutting forces of the whirling process are estimated. The effects of cutting forces on tool are analyzed using the ADAMS software. The validity of the simulations has been verified with a series of cutting experiments.

  7. 27 CFR 6.92 - Newspaper cuts.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Newspaper cuts. 6.92 Section 6.92 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS âTIED-HOUSEâ Exceptions § 6.92 Newspaper cuts. Newspaper cuts, mats, or engraved blocks for use in retailers'...

  8. 27 CFR 6.92 - Newspaper cuts.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2013-04-01 2013-04-01 false Newspaper cuts. 6.92 Section 6.92 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY ALCOHOL âTIED-HOUSEâ Exceptions § 6.92 Newspaper cuts. Newspaper cuts, mats, or engraved blocks for use in retailers'...

  9. 27 CFR 6.92 - Newspaper cuts.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2014-04-01 2014-04-01 false Newspaper cuts. 6.92 Section 6.92 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY ALCOHOL âTIED-HOUSEâ Exceptions § 6.92 Newspaper cuts. Newspaper cuts, mats, or engraved blocks for use in retailers'...

  10. 27 CFR 6.92 - Newspaper cuts.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2012-04-01 2012-04-01 false Newspaper cuts. 6.92 Section 6.92 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS âTIED-HOUSEâ Exceptions § 6.92 Newspaper cuts. Newspaper cuts, mats, or engraved blocks for use in retailers'...

  11. 27 CFR 6.92 - Newspaper cuts.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2011-04-01 2011-04-01 false Newspaper cuts. 6.92 Section 6.92 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS âTIED-HOUSEâ Exceptions § 6.92 Newspaper cuts. Newspaper cuts, mats, or engraved blocks for use in retailers'...

  12. Teaching Budget Cuts to Third Graders

    ERIC Educational Resources Information Center

    Weiss, Dale

    2011-01-01

    As a teacher in the Milwaukee Public Schools (MPS) for the past 16 years, this author has grown used to dismal budget cut news arriving each February. Although cuts are always frustrating and their results burdensome, his school has been able to "hang on" reasonably well. This year, however, the budget cuts were extreme. The school's budget was…

  13. Cutting a Tapered Edge on Padding Material

    NASA Technical Reports Server (NTRS)

    Mitchell, M. J.

    1982-01-01

    Resilience and flexibility of felt, rubber, or other padding materials allow them to be clamped in form block, cut straight down, and then released to produce straight clean tapered edge. With material held in slanted position, edge can be cut straight down; hence cut depth is minimum.

  14. Cutting costs without drawing blood.

    PubMed

    Copeland, T

    2000-01-01

    When looking for ways to cut costs, most managers reach for the head-count hatchet, and the markets usually roar with approval. But a company can almost always create far more sustainable value by rigorously evaluating the small-ticket capital items that often get rubber-stamped. Drawing on his experience as a consultant and providing numerous anecdotes, the author contends that those "little" requests often prove to be gold plated or unnecessary. A disciplined evaluation involves asking only eight questions and conducting postmortems--regular audits of units' capital spending. But the payoff is enormous. Because cutting the capital budget increases cash flow, the author argues that a permanent cut of just 15% in the planned level of capital spending could boost some companies' market capitalization by as much as 30%. The first three questions--Is this your investment to make? Does it really have to be new? How are our competitors meeting compliance needs?--are asked of operating managers as they assemble capital project requests. The next three are asked by senior managers of themselves and their colleagues as they examine proposals: Is the left hand duplicating investments made by the right? Are trade-offs between profit and capital spending well understood? Are there signs of budget massage? At the end of the review process, senior managers ask: Are we fully using shared assets? How fine-grained are our capacity measures? The author's suggestions for the postmortem include searching for systematic problems with whole classes of expenditures and making sure audit teams come up with specific recommendations for change. PMID:11143151

  15. Cutting of bent vortex lines

    SciTech Connect

    Wagenleithner, P.

    1982-07-01

    One of the major problems in the application of type II superconductors is the appearance of resistivity in case where a current-carrying specimen is in a longitudinal magnetic field. This is explained by the onset of flux-line cutting events, followed by cross-joining of the line parts. The calculation given here shows the amount of repulsive force and energy between two curved vortex lines and examines the general stability of the vortex-vortex system. First, the actual interaction potential between curved vortices is computed. It includes all electromagnetic and core overlap terms of interactions and self-interaction, and allows computation of the system energy under all curved vortex-line configurations. A computer program is used to find the form of lowest free energy. To do this, special trial functions are established to describe the three-dimensional form of the vortex-vortex system. In these functions parameters determine the qualitative and quantitative form. The asymptotic boundary conditions are built into the nature of the trial functions. The computer program now minimizes the free energy with respect to these parameters. The resulting repulsive energy and force are more than ten times less than the known results for straight flux lines, especially for small asymptotic cutting angles. There is no sharp maximum in the plot of repulsive force versus flux-line separation. A remarkable results is the loss of general stability below a separation distance of several London penetration depths, depending on the cutting angle and the Ginzburg-Landau parameter. The explanation lies in the local attraction of central sections of the vortices as a result of configurational adaption. This explains the onset of resistance at small currents and small magnetic fields.

  16. Automated Laser Cutting In Three Dimensions

    NASA Technical Reports Server (NTRS)

    Bird, Lisa T.; Yvanovich, Mark A.; Angell, Terry R.; Bishop, Patricia J.; Dai, Weimin; Dobbs, Robert D.; He, Mingli; Minardi, Antonio; Shelton, Bret A.

    1995-01-01

    Computer-controlled machine-tool system uses laser beam assisted by directed flow of air to cut refractory materials into complex three-dimensional shapes. Velocity, position, and angle of cut varied. In original application, materials in question were thermally insulating thick blankets and tiles used on space shuttle. System shapes tile to concave or convex contours and cuts beveled edges on blanket, without cutting through outer layer of quartz fabric part of blanket. For safety, system entirely enclosed to prevent escape of laser energy. No dust generated during cutting operation - all material vaporized; larger solid chips dislodged from workpiece easily removed later.

  17. Free-piston cutting machine

    DOEpatents

    Ciccarelli, Gaby; Subudhi, Manomohan; Hall, Robert E.

    2000-01-01

    A cutting machine includes a gun barrel for receiving a projectile. A compression tube is disposed in flow communication with the barrel and includes a piston therein. A reservoir is disposed in flow communication with the tube and receives a first gas under pressure. A second gas fills the compression tube on a front face of the piston. And, the pressurized first gas is discharged into the tube on a back face of the piston to accelerate the piston through the tube for compressing the second gas, and in turn launching the projectile through the barrel to impact a workpiece.

  18. The center-cut solution.

    PubMed

    Firnstahl, T W

    1993-01-01

    Timothy Firnstahl owns five successful restaurants in Seattle, but he recently came very close to owning none. In the early 1990s, he found himself, like so many restauranteurs, facing rising costs, inefficient management, and a recession. Confronting financial annihilation, Firnstahl had to act quickly: since he had no peripherals to trim, he cut off the head of his company. Remarkably, it worked. Firnstahl's problem was his new and innovative restaurant, Sharps Fresh Roasting. The heart of the Sharps concept was a unique long-roasting technique that made lean, inexpensive meats taste as juicy and delicious as fattier, expensive cuts. The process also lent itself to faster service and lower labor costs. But it wasn't working. Sharps wasn't breaking even, and his other restaurants couldn't make up the difference. He needed a solution fast. Firnstahl got his answer from Mikhail Gorbachev: slash the centralized command and liberate the company. In doing so, he would also transfer virtually all power and responsibility to his line managers. And after five months of intensive study and planning, he accomplished what he set out to do. He fired most of his corporate staff, empowered his restaurant managers with "100% Power and Responsibility," and, finally, undertook a massive promotion campaign. A year later, Sharps Fresh Roasting is the gold mine Firnstahl always believed it could be. He's done away with bureaucracy and turned business around in a down market. All this because his managers are managing themselves. PMID:10126155

  19. Chemical scissors cut phosphorene nanostructures

    NASA Astrophysics Data System (ADS)

    Peng, Xihong; Wei, Qun

    2014-12-01

    Phosphorene, a recently fabricated two-dimensional puckered honeycomb structure of phosphorus, showed promising properties for applications in nano-electronics. In this work, we report a chemical scissors effect on phosphorene, using first-principles method. It was found that chemical species, such as H, OH, F, and Cl, can act as scissors to cut phosphorene. Phosphorus nanochains and nanoribbons can be obtained. The scissors effect results from the strong bonding between the chemical species and phosphorus atoms. Other species such as O, S and Se fail to cut phosphorene nanostructures due to their weak bonding with phosphorus. The electronic structures of the produced P-chains reveal that the hydrogenated chain is an insulator while the pristine chain is a one-dimensional Dirac material, in which the charge carriers are massless fermions travelling at an effective speed of light ˜8 × 105 m s-1. The obtained zigzag phosphorene nanoribbons show either metallic or semiconducting behaviors, depending on the treatment of the edge phosphorus atoms.

  20. Influences of sequential cuts on micro-cutting process studied by smooth particle hydrodynamic (SPH)

    NASA Astrophysics Data System (ADS)

    Zhao, Hongwei; Liu, Chuang; Cui, Tao; Tian, Ye; Shi, Chengli; Li, Jianping; Huang, Hu

    2013-11-01

    Machined surface properties have a great influence on the service life of component. The residual stress in machined surface layer is affected by the micro-cutting process. Sequential cuts influence the machined surface layer. In this paper, a mesh-less method called SPH (smooth particle hydrodynamic) is used to investigate the effect of sequential cuts and residual stress on chip formation, cutting force and the residual stress in machined surface for oxygen-free high-conductivity copper (OFHC). In micro-cutting process the cutting edge radius plays a crucial role. The effect of the cutting edge radius on residual stress is also investigated in this paper. The simulation results showed that the chip curled severely and the minimum chip thickness decreased in the second cut because of residual stress in the machined surface after the first cut. Meanwhile, the cutting force in the second cut was smaller than the first cut, while the thrust force was nearly the same during two cuts. In addition, the tensile residual stress beneath the machined surface layer would change to compressive stress after the second cut. Therefore, the residual stress in machined surface can be changed through sequential cuts with proper machining parameters to get high quality machined surface.

  1. Cut performance levels and testing.

    PubMed

    Bennett, Bill; Moreland, Jeff

    2011-11-01

    While the ISEA performance levels and general recommendations detailed above can help tp provide guidance when selecting hand protection products, the responsibility for testing products for specific end-user applications still rests with the end user. We can indicate, for example, that a medium-weight, uncoated Kevlar glove will typically have an ISEA cut rating of 3, but we cannot say the glove will provide the level of protection needed for the range of jobs on an automobile assembly line. Another Level 3 glove might be better suited to an application the require the worker to have an oil grip. As glove manufacturers, we know gloves. We do not know the details about every workplace. We therefore, must look to our customers to provide us the properties they need for hand protection products that will sufficiently protect their workers on the job.

  2. House cuts NASA, NSF budgets

    NASA Astrophysics Data System (ADS)

    The House passed its version of the Fiscal Year 1990 spending bill July 20, voting less money than requested for NASA, NSF, and other independent agencies. An appropriation of $1.6 billion was approved for the space station despite an effort to cut funding for the project on the House floor.With a voice vote the House approved a Veterans Affairs-Housing and Urban Development- Independent Agencies subcommittee (VAHUDIA) package totaling $65.1 billion, nearly $2.5 billion more than requested in President Bush's budget. NSF received $1.99 billion in the bill, $150 million less than requested, and NASA $12.26 billion, more than a billion less than the President asked for. The Department of Housing and Urban Development ($2.23 billion more than requested) and the Department of Veteran's Affairs ($908 million more than requested) were the big winners in the bill.

  3. Demonstration project cuts red tape

    NASA Astrophysics Data System (ADS)

    Katzoff, Judith A.

    Results from a demonstration project aimed at cutting red tape in federal grants for basic research at universities are "very encouraging" so far, according to Don I. Phillips, executive director of the Government-University-Industry Research Roundtable. The roundtable is coordinating the experimental effort, with the participation of five major federal agencies as well as the Florida state university system and the University of Miami (a private institution in Coral Gables, Fla.).Under the project, special conditions apply to grants from the participating agencies to individual researchers at the participating universities: Investigators do not have to ask the agency's permission for changes in budget allocations, purchases of permanent equipment, or foreign travel. Grant money can be spent up to a year after the grant ends without a special request. Under this plan, researchers, with agency approval, can also ask to have their entire research program covered as a single administrative entity, rather than as several individual projects.

  4. New Modelling Strategies For Metal Cutting

    SciTech Connect

    Rosa, Pedro A. R.; Martins, Paulo A. F.; Atkins, Anthony G.

    2007-05-17

    This paper draws from the 'plasticity and friction only' view of metal cutting to the presentation of new modelling strategies based on the interaction between finite elements and modern ductile fracture mechanics. The overall presentation is supported by specially designed orthogonal metal cutting experiments that were performed on Lead test specimens under laboratory-controlled conditions. Comparisons between theoretical predictions and experimental results comprise a wide range of topics such as material flow, cutting forces and specific cutting pressure. The paper demonstrates that while material flow and chip formation can be successfully modelled by traditional 'plasticity and friction only' analyses, the contribution of the fracture work involved in the formation of new surfaces is essential for obtaining good estimates of cutting forces and of the specific cutting pressure.

  5. Defect characterization in the diamond cutting tools

    SciTech Connect

    Zeren, Muzaffer . E-mail: zeren@kou.edu.tr; Karagoez, Sadi

    2006-08-15

    In this study, a general defect characterization in the diamond cutting tools used in natural stone cutting has been investigated. Transverse rupture tests were carried out with different matrix and diamond compositions. In these defect characterization studies on diamond cutting tool materials various microstructural analyses were performed using the techniques of light microscopy (LM), scanning electron microscopy (SEM), energy-dispersed X-ray spectrography (EDX) and image analysis (IA)

  6. Cutting sound enhancement system for mining machines

    DOEpatents

    Leigh, Michael C.; Kwitowski, August J.

    1992-01-01

    A cutting sound enhancement system (10) for transmitting an audible signal from the cutting head (101) of a piece of mine machinery (100) to an operator at a remote station (200), wherein, the operator using a headphone unit (14) can monitor the difference in sounds being made solely by the cutting head (101) to determine the location of the roof, floor, and walls of a coal seam (50).

  7. Advanced cryogenics for cutting tools. Final report

    SciTech Connect

    Lazarus, L.J.

    1996-10-01

    The purpose of the investigation was to determine if cryogenic treatment improved the life and cost effectiveness of perishable cutting tools over other treatments or coatings. Test results showed that in five of seven of the perishable cutting tools tested there was no improvement in tool life. The other two tools showed a small gain in tool life, but not as much as when switching manufacturers of the cutting tool. The following conclusions were drawn from this study: (1) titanium nitride coatings are more effective than cryogenic treatment in increasing the life of perishable cutting tools made from all cutting tool materials, (2) cryogenic treatment may increase tool life if the cutting tool is improperly heat treated during its origination, and (3) cryogenic treatment was only effective on those tools made from less sophisticated high speed tool steels. As a part of a recent detailed investigation, four cutting tool manufacturers and two cutting tool laboratories were queried and none could supply any data to substantiate cryogenic treatment of perishable cutting tools.

  8. Cutting food in terrestrial carnivores and herbivores.

    PubMed

    Sanson, Gordon

    2016-06-01

    Insects and mammals cut their food up into small pieces to facilitate ingestion and chemical digestion. Teeth and jaws act as cutting tools, but, unlike engineering tools designed for a specific purpose, must generally cope with substantial variation in food properties and work at many scales. Knowing how teeth and jaws work effectively requires an understanding of the cutting on the edges and the mechanisms that remove cut material. Variability and heterogeneity of diet properties are not well known, and, for example, may be higher and overlap more in the browsing and grazing categories of plant diets. A reinterpretation of tooth function in large mammal browsers and grazers is proposed. PMID:27274799

  9. Wear mechanism of diamond coated cutting tools

    SciTech Connect

    Leyendecker, T.; Lemmer, O.; Esser, S.

    1995-12-31

    Since Diamond Coatings were introduced into the market in 1989, five years experience in industrial applications of diamond coated cutting tools enables to present an overview of tool life and wear behavior of diamond coated cutting tools due to different cutting conditions and workpiece-materials. Machining reinforced plastics, presintered ceramic compacts, aluminum alloys, metal-matrix composites and graphite, different wear behavior occurs at the cutting edges of diamond coated tools. Having a good adhesion fatigue and chemical wear of Diamond coatings determines life time of the tools. By a profound pretreatment procedure CVD Diamond coated tools can compete with conventional PCD-tools.

  10. Machining Challenges: Macro to Micro Cutting

    NASA Astrophysics Data System (ADS)

    Shunmugam, M. S.

    2016-04-01

    Metal cutting is an important machining operation in the manufacture of almost all engineering components. Cutting technology has undergone several changes with the development of machine tools and cutting tools to meet challenges posed by newer materials, complex shapes, product miniaturization and competitive environments. In this paper, challenges in macro and micro cutting are brought out. Conventional and micro end-milling are included as illustrative examples and details are presented along with discussion. Lengthy equations are avoided to the extent possible, as the emphasis is on the basic concepts.

  11. The effect of cutting speed on residual stresses when orthogonal cutting TC4

    NASA Astrophysics Data System (ADS)

    Liu, Chaofeng; Wang, Zengqiang; Zhang, Guang; Liu, Lei

    2015-09-01

    As one of the most important parameters in mental cutting, cutting speed has a significant influence on residual stress. Finite element method and experiment method are used to study the relationship between cutting speed and residual stress when orthogonal cutting TC4 titanium alloy. The result of simulation and experiment shows that: when the cutting speed is low, the residual stress in axial direction is compressive stress and gradually converts to tensile stress with the increase of cutting speed, but it will convert to compressive stress again if the cutting speed continues to increase; the residual stress in tangential direction is constant to compressive stress and it will decrease with the increase of cutting speed.

  12. Corner-cutting mining assembly

    DOEpatents

    Bradley, J.A.

    1981-07-01

    This invention resulted from a contract with the United States Department of Energy and relates to a mining tool. More particularly, the invention relates to an assembly capable of drilling a hole having a square cross-sectional shape with radiused corners. In mining operations in which conventional auger-type drills are used to form a series of parallel, cylindrical holes in a coal seam, a large amount of coal remains in place in the seam because the shape of the holes leaves thick webs between the holes. A higher percentage of coal can be mined from a seam by a means capable of drilling holes having a substantially square cross section. It is an object of this invention to provide an improved mining apparatus by means of which the amount of coal recovered from a seam deposit can be increased. Another object of the invention is to provide a drilling assembly which cuts corners in a hole having a circular cross section. These objects and other advantages are attained by a preferred embodiment of the invention.

  13. Simplified cut core inductor design

    NASA Technical Reports Server (NTRS)

    Mclyman, W. T.

    1974-01-01

    Although filter inductor designers have routinely tended to specify molypermalloy powder cores for use in high frequency power converters and pulse-width modulated switching regulators, there are sigificant advantages in specifying C cores and cut toroids fabricated from grain oriented silicon steels which should not be overlooked. Such steel cores can develop flux densities of 1.6 tesla, with useful linearity to 1.2 tesla, whereas molypermalloy cores carrying d.c. current have useful flux density capabilities only to about 0.3 tesla. The use of silicon steel cores thus makes it possible to design more compact cores, and therefore inductors of reduced volume, or conversely to provide greater load capacity in inductors of a given volume. Information is available which makes it possible to obtain quick and close approximations of significant parameters such as size, weight and temperature rise for silicon steel cores for breadboarding. Graphs, nomographs and tables are presented for this purpose, but more complete mathematical derivations of some of the important parameters are also included for a more rigorous treatment.

  14. Cutting fluid for machining fissionable materials

    SciTech Connect

    Duerksen, W.K.; Googin, J.M.; Napier, B. Jr.

    1982-01-28

    The present invention is directed to a cutting fluid for machining fissionable material. The cutting fluid is formed of glycol, water and a boron compound in an adequate concentration for effective neutron attenuation so as to inhibit criticality incidents during machining.

  15. Cutting tool form compensaton system and method

    DOEpatents

    Barkman, William E.; Babelay, Jr., Edwin F.; Klages, Edward J.

    1993-01-01

    A compensation system for a computer-controlled machining apparatus having a controller and including a cutting tool and a workpiece holder which are movable relative to one another along a preprogrammed path during a machining operation utilizes a camera and a vision computer for gathering information at a preselected stage of a machining operation relating to the actual shape and size of the cutting edge of the cutting tool and for altering the preprogrammed path in accordance with detected variations between the actual size and shape of the cutting edge and an assumed size and shape of the cutting edge. The camera obtains an image of the cutting tool against a background so that the cutting tool and background possess contrasting light intensities, and the vision computer utilizes the contrasting light intensities of the image to locate points therein which correspond to points along the actual cutting edge. Following a series of computations involving the determining of a tool center from the points identified along the tool edge, the results of the computations are fed to the controller where the preprogrammed path is altered as aforedescribed.

  16. Cutting tool form compensation system and method

    DOEpatents

    Barkman, W.E.; Babelay, E.F. Jr.; Klages, E.J.

    1993-10-19

    A compensation system for a computer-controlled machining apparatus having a controller and including a cutting tool and a workpiece holder which are movable relative to one another along a preprogrammed path during a machining operation utilizes a camera and a vision computer for gathering information at a preselected stage of a machining operation relating to the actual shape and size of the cutting edge of the cutting tool and for altering the preprogrammed path in accordance with detected variations between the actual size and shape of the cutting edge and an assumed size and shape of the cutting edge. The camera obtains an image of the cutting tool against a background so that the cutting tool and background possess contrasting light intensities, and the vision computer utilizes the contrasting light intensities of the image to locate points therein which correspond to points along the actual cutting edge. Following a series of computations involving the determining of a tool center from the points identified along the tool edge, the results of the computations are fed to the controller where the preprogrammed path is altered as aforedescribed. 9 figures.

  17. Plywood Inlays Thourgh CO2 Laser Cutting

    NASA Astrophysics Data System (ADS)

    Pires, Margarida C.; Araujo, J. L.; Teixeira, M. Ribau; Rodrigues, F. Carvalho

    1989-07-01

    Furniture with inlays is rather expensive. This is so on two accounts: Firstly, furniture with inlays is generally manufactured with solid wood.Secondly,wood carving and figure cutting are both time consuming and they produce a high rate of rejections. To add to it all the cutting and carving of minute figures requires an outstanding craftmanship. In fact the craftman is in most instance the artist and also the manufacturer. While desiring that the high artistic level is maintained in the industry the search for new method to produce inlays for furniture in not son expensive materials and to produce them in a repetitive and flexible way laser cutting of plywood was found to be quite suitable. This paper presents the charts for CO2 laser cutting of both positive and negatives in several types of plywood. The main problem is not so much the cutting of the positive and negatives pieces but to be able to cut the piece in a way that the fitting is done without any problems caused by the ever present charring effect, which takes palce at the edges of the cut pieces. To minimise this aspect positive and negative pieces have to be cut under stringent focusing conditions and with slight different scales. The condittions for our machine are presented.

  18. Microwave interferometer controls cutting depth of plastics

    NASA Technical Reports Server (NTRS)

    Heisman, R. M.; Iceland, W. F.

    1969-01-01

    Microwave interferometer system controls the cutting of plastic materials to a prescribed depth. The interferometer is mounted on a carriage with a spindle and cutting tool. A cross slide, mounted on the carriage, allows the interferometer and cutter to move toward or away from the plastic workpiece.

  19. Drilling subsurface wellbores with cutting structures

    DOEpatents

    Mansure, Arthur James; Guimerans, Rosalvina Ramona

    2010-11-30

    A system for forming a wellbore includes a drill tubular. A drill bit is coupled to the drill tubular. One or more cutting structures are coupled to the drill tubular above the drill bit. The cutting structures remove at least a portion of formation that extends into the wellbore formed by the drill bit.

  20. Don't Camouflage Budget Cuts.

    ERIC Educational Resources Information Center

    DeLuca, Nicholas M.

    1982-01-01

    Instead of shielding the public from the effects of budget cuts by making small across-the-board cuts on many programs, school administrators should slash whole programs. This will maintain the system's overall educational effectiveness while making clear the consequences of the public's political actions. (Author/RW)

  1. Postharvest: Cut flowers and potted plants

    Technology Transfer Automated Retrieval System (TEKTRAN)

    In the past fifty years, the cut flower market has changed dramatically, from a local market with growers located on city outskirts, to a global one; flowers and cut foliage sourced from throughout the world are sold as bunches or combined into arrangements and bouquets in the major target markets. ...

  2. Cut Next Winter's Heating Bill Today.

    ERIC Educational Resources Information Center

    Sturgeon, Julie

    1999-01-01

    Presents specific steps that help make schools energy efficient and cut costs. Four basic strategies are suggested that include creating a database of energy usage that can also catch the occasional billing error, investigating less obvious ways of cutting energy use, such as applying cellulose commercial spray as an insulation choice, and…

  3. Cutting Watermelon: Lessons in Instructional Coaching

    ERIC Educational Resources Information Center

    Sandstead, Martha

    2016-01-01

    Literacy coordinator Martha Sandstead finds inspiration for her coaching work in a quote from civil rights organizer Lawrence Guyot: "Let's say you're riding past a picnic, and people are cuttin' watermelons. You don't immediately go and say, "stop the watermelon cutting" and let's talk. … You cut some watermelons, or you help…

  4. Antimicrobial packaging for fresh-cut fruits

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Fresh-cut fruits are minimally processed produce which are consumed directly at their fresh stage without any further kill step. Microbiological quality and safety are major challenges to fresh-cut fruits. Antimicrobial packaging is one of the innovative food packaging systems that is able to kill o...

  5. President's Budget Would Cut Education Spending

    ERIC Educational Resources Information Center

    Davis, Michelle R.

    2006-01-01

    This article discusses President Bush's budget cut on education spending. The president's blueprint for federal education spending in the next fiscal year includes a high-profile plan to boost math and science education, new money for private school vouchers, a renewed push to improve high schools--and the most drastic cut in Department of…

  6. Meat Cutting Classes--Popular with Adults

    ERIC Educational Resources Information Center

    Mostad, James; Carpentier, Dale

    1976-01-01

    Presents a session by session description of a "meats" class, which is offered to high school students (9-week period) and adults (8-week period). The classes cover identification of cuts (beef, sheep, hogs, and veal; grades and grading of live animals and carcasses; economics of butchering and cutting your own meat; actual slaughtering; and the…

  7. Overhead and operations: cutting where it counts.

    PubMed

    Shorr, Jay A

    2014-01-01

    To remain a profitable entity, whether a retail operation, manufacturing plant, or a medical practice, the common denominator is the same: where can you cut your costs, increase your revenue, and maintain additional profitability? Learning where to cut your operational expenses is as important to your business's profit-ability as bringing in additional dollars. PMID:25807622

  8. 33 CFR 117.161 - Honker Cut.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 33 Navigation and Navigable Waters 1 2013-07-01 2013-07-01 false Honker Cut. 117.161 Section 117.161 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY BRIDGES DRAWBRIDGE OPERATION REGULATIONS Specific Requirements California § 117.161 Honker Cut. The draw of the San Joaquin County (Eightmile Road) bridge, mile...

  9. 33 CFR 117.143 - Bishop Cut.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 33 Navigation and Navigable Waters 1 2013-07-01 2013-07-01 false Bishop Cut. 117.143 Section 117.143 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY BRIDGES DRAWBRIDGE OPERATION REGULATIONS Specific Requirements California § 117.143 Bishop Cut. The draw of the San Joaquin County highway bridge, mile 1.0 between...

  10. Corn stalk orientation effect on mechanical cutting

    SciTech Connect

    Igathinathane, C.; Womac, A.R.; Sokhansanj, Shahabaddine

    2010-07-01

    Research efforts that increase the efficiency of size reduction of biomass can lead to a significant energy saving. This paper deals with the determination of the effect of sample orientation with respect to cutting element and quantify the possible cutting energy reduction, utilising dry corn stalks as the test material (15%e20% wet basis). To evaluate the mechanical cutting characteristics of corn stalks, a Warnere Bratzler device was modified by replacing its blunt edged cutting element with one having a 30_ single bevel sharp knife edge. Cutting force-deformation characteristics obtained with a universal testing machine were analysed to evaluate the orientation effects at perpendicular (90o), inclined (45o), and parallel (0o) orientations on internodes and nodes for cutting force, energy, ultimate stress, and specific energy of corn stalks. The corn stalks cutting force-displacement characteristics were found to differ with orientation, and internode and node material difference. Overall, the peak failure force, and the total cutting energy of internodes and nodes varied significantly (P < 0.05) with stalk cross-sectional area. The specific energy values (total energy per unit cut area) of dry corn stalk internodes ranged from 11.3 to 23.5 kN m_1, and nodes from 8.6 to 14.0 kN m_1. The parallel orientation (along grain) compared to perpendicular (across grain) produced a significant reduction of the cutting stress and the specific energy to one tenth or better for internodes, and to about one-fifth for nodes.

  11. Laser cutting of Kevlar laminates and thermal stress formed at cutting sections

    NASA Astrophysics Data System (ADS)

    Yilbas, B. S.; Akhtar, S. S.

    2012-02-01

    Laser cutting of Kevlar laminates is carried out and thermal stress field developed in the cutting region is predicted using the finite element code. Temperature predictions are validated through the thermocouple data. The morphological changes in the cutting section are examined by incorporating optical and scanning electron microscopes. It is found that temperature predictions agree well with the thermocouple data. High values of von Mises stress are observed at the cutting edges and at the mid-thickness of the Kevlar laminate due to thermal compression formed in this region. The laser cut edges are free from whiskers; however, striation formation and some small sideways burning is observed at the kerf edges.

  12. Portable propellant cutting assembly, and method of cutting propellant with assembly

    NASA Technical Reports Server (NTRS)

    Sharp, Roger A. (Inventor); Hoskins, Shawn W. (Inventor); Payne, Brett D. (Inventor)

    2002-01-01

    A propellant cutting assembly and method of using the assembly to cut samples of solid propellant in a repeatable and consistent manner is disclosed. The cutting assembly utilizes two parallel extension beams which are shorter than the diameter of a central bore of an annular solid propellant grain and can be loaded into the central bore. The assembly is equipped with retaining heads at its respective ends and an adjustment mechanism to position and wedge the assembly within the central bore. One end of the assembly is equipped with a cutting blade apparatus which can be extended beyond the end of the extension beams to cut into the solid propellant.

  13. Estimating cutting front temperature difference in disk and CO2 laser beam fusion cutting

    NASA Astrophysics Data System (ADS)

    Scintilla, L. D.; Tricarico, L.

    2012-07-01

    A three-dimensional, semi-stationary, simplified thermal numerical model was developed. The average cutting front temperature difference in disk and CO2 laser beam fusion cutting of 90MnCrV8 was estimated by computing the conductive power loss. Basing on heat affected zone extension experimentally measured and using an inverse methodology approach, the unknown thermal load on the cutting front during laser cutting was calculated. The accuracy of the numerical power loss estimation was evaluated comparing the results from simulation with the ones from analytical models. A good agreement was found for all the test cases considered in this study. The conduction losses estimation was used for justifying the lower quality of disk laser cuts due to the lower average cut front temperature. This results in the increase of viscosity of molten material and in the subsequent more difficult ejection of the melted material from the cut kerf.

  14. Mist, substrate water potential and cutting water potential influence rooting of stem cuttings of loblolly pine.

    PubMed

    Lebude, Anthony V; Goldfarb, Barry; Blazich, Frank A; Wise, Farrell C; Frampton, John

    2004-07-01

    We investigated the influence of cutting water potential (Psicut) on rooting of juvenile hardwood (dormant) and softwood (succulent) stem cuttings of loblolly pine (Pinus taeda L.) propagated under varying substrate water potentials (Psisub) and volumes of mist application. Mist treatment and Psisub contributed to the Psicut of unrooted stem cuttings. When Psisub was held constant across mist treatments, mist treatment contributed strongly to Psicut. Substrate water potential affected rooting percentage when mist treatment was sub-optimal or excessive, otherwise mist treatment had a stronger effect than Psisub on rooting percentage. Cuttings rooted best when subjected to moderate cutting water potentials (-0.5 to -1.2 MPa) during the initial 4 or 5 weeks of the rooting period. Cuttings experiencing either severe water deficit or no water deficit rooted poorly. We conclude that the rooting environment should impose a moderate water stress on loblolly pine stem cuttings to achieve optimum rooting.

  15. Characterization of metal cutting dynamics. Final report

    SciTech Connect

    Berger, B.S.; Minis, I.

    1997-11-01

    A Hardinge CNC lathe has been fitted with sensors and a data acquisition system for the measurement, processing and storage of accelerations and forces associated with orthogonal cutting. This system has been completely validated. Orthogonal cutting experiments were designed in order to study the effects of critical cutting parameters on machining dynamics. Three major experimental sets were conducted. In the first set the depth of cut was increased in a stepwise fashion, while the workpiece surface speed, the spindle speed, and the tool feedrate were maintained invariant. In the second and third sets, the spindle speed and feedrate were varied, respectively, while maintaining all the other parameters invariant. In total over two hundred orthogonal cutting experiments were performed. In each experiment, the two non-zero components of the tool acceleration and the two non-zero components of the cutting force were measured. Despite high noise levels, mutual information calculations with smoothing kernels and false nearest neighbor algorithms proved to be sufficiently robust to provide upper bounds on attractor dimension for all fifty data sets studied. These results prove that the infinite dimensional cutting process has an associated attractor of dimension {le} 4. This result is important as a guide to model construction. An analysis of the power spectral sideband structure proved that sideband spacing is identical to the turning frequency. This result was further substantiated through envelope detection techniques. A linear delay model was shown to emulate the experimental power spectrum and possess predictive capacity.

  16. Laser cutting with chemical reaction assist

    SciTech Connect

    Gettemy, D.J.

    1991-04-08

    This invention is comprised of a method for cutting with a laser beam where an oxygen-hydrocarbon reaction is used to provide auxiliary energy to a metal workpiece to supplement the energy supplied by the laser. Oxygen is supplied to the laser focus point on the workpiece by a nozzle through which the laser beam also passes. A liquid hydrocarbon is supplied by coating the workpiece along the cutting path with the hydrocarbon prior to laser irradiation or by spraying a stream of hydrocarbon through a nozzle aimed at a point on the cutting path which is just ahead of the focus point during irradiation.

  17. Ultrasonic technology improves drill cuttings disposal

    SciTech Connect

    Avern, N.; Copercini, A.

    1997-07-01

    Advancements are being made by employing ultrasonics for onsite cuttings size reduction for slurrification prior to disposal. The size reduction proficiency of this new ultrasonics slurrification system as a medium to reduce the particle size of drill cuttings presents operators with a system that can enhance existing disposal techniques. This article presents results from a recent field trial, where ultrasonic processors were used to Agip (UK) Limited to reduce the particle size of drill cuttings prior to disposal into the water column and natural dispersement.

  18. Reconfigurable manufacturing execution system for pipe cutting

    NASA Astrophysics Data System (ADS)

    Yin, Y. H.; Xie, J. Y.

    2011-08-01

    This article presents a reconfigurable manufacturing execution system (RMES) filling the gap between enterprise resource planning and resource layer for pipe-cutting production with mass customisation and rapid adaptation to dynamic market, which consists of planning and scheduling layer and executive control layer. Starting from customer's task and process requirements, the cutting trajectories are planned under generalised mathematical model able to reconfigure in accordance with various intersecting types' joint, and all tasks are scheduled by nesting algorithm to maximise the utilisation rate of rough material. This RMES for pipe cutting has been effectively implemented in more than 100 companies.

  19. Laser cutting with chemical reaction assist

    DOEpatents

    Gettemy, D.J.

    1992-11-17

    A method is described for cutting with a laser beam where an oxygen-hydrocarbon reaction is used to provide auxiliary energy to a metal workpiece to supplement the energy supplied by the laser. Oxygen is supplied to the laser focus point on the workpiece by a nozzle through which the laser beam also passes. A liquid hydrocarbon is supplied by coating the workpiece along the cutting path with the hydrocarbon prior to laser irradiation or by spraying a stream of hydrocarbon through a nozzle aimed at a point on the cutting path which is just ahead of the focus point during irradiation. 1 figure.

  20. Laser cutting with chemical reaction assist

    DOEpatents

    Gettemy, Donald J.

    1992-01-01

    A method for cutting with a laser beam where an oxygen-hydrocarbon reaction is used to provide auxiliary energy to a metal workpiece to supplement the energy supplied by the laser. Oxygen is supplied to the laser focus point on the workpiece by a nozzle through which the laser beam also passes. A liquid hydrocarbon is supplied by coating the workpiece along the cutting path with the hydrocarbon prior to laser irradiation or by spraying a stream of hydrocarbon through a nozzle aimed at a point on the cutting path which is just ahead of the focus point during irradiation.

  1. Imaging, cutting, and collecting instrument and method

    DOEpatents

    Tench, Robert J.; Siekhaus, Wigbert J.; Balooch, Mehdi; Balhorn, Rodney L.; Allen, Michael J.

    1995-01-01

    Instrumentation and techniques to image small objects, such as but not limited to individual human chromosomes, with nanometer resolution, to cut-off identified parts of such objects, to move around and manipulate such cut-off parts on the substrate on which they are being imaged to predetermined locations on the substrate, and to remove the cut-off parts from the substrate. This is accomplished using an atomic force microscope (AFM) and by modification of the conventional cantilever stylus assembly of an AFM, such that plural cantilevers are used with either sharp-tips or knife-edges thereon. In addition, the invention can be utilized for measuring hardness of materials.

  2. Making the Cut: Lattice Kirigami Rules

    NASA Astrophysics Data System (ADS)

    Castle, Toen; Cho, Yigil; Gong, Xingting; Jung, Euiyeon; Sussman, Daniel M.; Yang, Shu; Kamien, Randall D.

    2014-12-01

    In this Letter we explore and develop a simple set of rules that apply to cutting, pasting, and folding honeycomb lattices. We consider origami-like structures that are extrinsically flat away from zero-dimensional sources of Gaussian curvature and one-dimensional sources of mean curvature, and our cutting and pasting rules maintain the intrinsic bond lengths on both the lattice and its dual lattice. We find that a small set of rules is allowed providing a framework for exploring and building kirigami—folding, cutting, and pasting the edges of paper.

  3. An FMS Dynamic Production Scheduling Algorithm Considering Cutting Tool Failure and Cutting Tool Life

    NASA Astrophysics Data System (ADS)

    Setiawan, A.; Wangsaputra, R.; Martawirya, Y. Y.; Halim, A. H.

    2016-02-01

    This paper deals with Flexible Manufacturing System (FMS) production rescheduling due to unavailability of cutting tools caused either of cutting tool failure or life time limit. The FMS consists of parallel identical machines integrated with an automatic material handling system and it runs fully automatically. Each machine has a same cutting tool configuration that consists of different geometrical cutting tool types on each tool magazine. The job usually takes two stages. Each stage has sequential operations allocated to machines considering the cutting tool life. In the real situation, the cutting tool can fail before the cutting tool life is reached. The objective in this paper is to develop a dynamic scheduling algorithm when a cutting tool is broken during unmanned and a rescheduling needed. The algorithm consists of four steps. The first step is generating initial schedule, the second step is determination the cutting tool failure time, the third step is determination of system status at cutting tool failure time and the fourth step is the rescheduling for unfinished jobs. The approaches to solve the problem are complete-reactive scheduling and robust-proactive scheduling. The new schedules result differences starting time and completion time of each operations from the initial schedule.

  4. Laser Cutting of Leather: Tool for Industry or Designers?

    NASA Astrophysics Data System (ADS)

    Stepanov, Alexander; Manninen, Matti; Pärnänen, Inni; Hirvimäki, Marika; Salminen, Antti

    Currently technologies which are applied for leather cutting include slitting knifes, die press techniques and manual cutting. Use of laser technology has grown significantly during recent years due to number of advantages over conventional cutting methods; flexibility, high production speed, possibility to cut complex geometries, easier cutting of customized parts, and less leftovers of leather makes laser cutting more and more economically attractive to apply for leather cutting. Laser technology provides advantages in cutting complex geometries, stable cutting quality and possibility to utilize leather material in economically best way. Constant quality is important in industrial processes and laser technology fulfills this requirement: properly chosen laser cutting parameters provides identical cuts. Additionally, laser technology is very flexible in terms of geometries: complex geometries, individual designs, prototypes and small scale products can be manufactured by laser cutting. Variety of products, which needed to be cut in small volumes, is also the application where laser cutting can be more beneficial due to possibility to change production from one product to another only by changing geometry without a need to change cutting tool. Disadvantages of laser processing include high initial investment costs and some running costs due to maintenance and required gas supply for the laser. Higher level of operator's expertise is required due to more complicated machinery in case of laser cutting. This study investigates advantages and disadvantages of laser cutting in different areas of application and provides comparison between laser cutting and mechanical cutting of leather.

  5. Chevron cutting: Experiment with new runway mixtures

    NASA Technical Reports Server (NTRS)

    Tyran, K. (Compiler)

    1978-01-01

    Chevron cutting is shown to occur in different forms depending on the type of tire and the rubber on the running surface. Hardest wear is shown by the main tires of the B-747. Four defects occurred, in the form of two rip separation and two breakouts of the running surface. Tires capped by Thompson are more affected than any of the other rubber-capping fabrics. For Thompson tires, Chevron Cutting is greatly reduced with a fiberglass-rubber mixture. For Goodyear tires, it is eliminated with spiral wrap rubbercapping; resistance to damages through cuts seems to be more positive for Goodyear tires. For Mader tires, the extent of Chevron Cutting is generally smaller than for Thompson cappings.

  6. Hydro Impact Basin Ribbon-Cutting Ceremony

    NASA Video Gallery

    August 9, 2011 -- Ribbon-cutting ceremony for the Hydro Impact Basin at NASA's Langley Research Center in Hampton, Va. The HIB expands NASA's capability to test and certify future spacecraft for wa...

  7. Automated Cell-Cutting for Cell Cloning

    NASA Astrophysics Data System (ADS)

    Ichikawa, Akihiko; Tanikawa, Tamio; Matsukawa, Kazutsugu; Takahashi, Seiya; Ohba, Kohtaro

    We develop an automated cell-cutting technique for cell cloning. Animal cells softened by the cytochalasin treatment are injected into a microfluidic chip. The microfluidic chip contains two orthogonal channels: one microchannel is wide, used to transport cells, and generates the cutting flow; the other is thin and used for aspiration, fixing, and stretching of the cell. The injected cell is aspirated and stretched in the thin microchannel. Simultaneously, the volumes of the cell before and after aspiration are calculated; the volumes are used to calculate the fluid flow required to aspirate half the volume of the cell into the thin microchannel. Finally, we apply a high-speed flow in the orthogonal microchannel to bisect the cell. This paper reports the cutting process, the cutting system, and the results of the experiment.

  8. FTA Basic Event & Cut Set Ranking.

    1999-05-04

    Version 00 IMPORTANCE computes various measures of probabilistic importance of basic events and minimal cut sets to a fault tree or reliability network diagram. The minimal cut sets, the failure rates and the fault duration times (i.e., the repair times) of all basic events contained in the minimal cut sets are supplied as input data. The failure and repair distributions are assumed to be exponential. IMPORTANCE, a quantitative evaluation code, then determines the probability ofmore » the top event and computes the importance of minimal cut sets and basic events by a numerical ranking. Two measures are computed. The first describes system behavior at one point in time; the second describes sequences of failures that cause the system to fail in time. All measures are computed assuming statistical independence of basic events. In addition, system unavailability and expected number of system failures are computed by the code.« less

  9. Ribbon cutting opens new ELV offices

    NASA Technical Reports Server (NTRS)

    2000-01-01

    Center Director Roy Bridges welcomes the audience to a ribbon- cutting ceremony at the E&O Building at KSC. Home for NASA's unmanned missions since 1964, the building has been renovated to house the Expendable Launch Vehicle Program.

  10. Threaded pilot insures cutting tool alignment

    NASA Technical Reports Server (NTRS)

    Goldman, R.; Schneider, W. E.

    1966-01-01

    Threaded pilot allows machining of a port component, or boss, after the reciprocating hole has been threaded. It is used to align cutting surfaces with the boss threads, thus insuring precision alignment.

  11. Climate science hit by job cuts

    NASA Astrophysics Data System (ADS)

    Randall, Ian

    2016-03-01

    Climate researchers in Australia are bracing themselves for heavy job cuts as the country's national scientific agency - the Commonwealth Scientific and Industrial Research Organisation (CSIRO) - said last month it will reprioritize towards innovation.

  12. Laser cutting system for nuclear fuel disassembly

    SciTech Connect

    Weil, B.S.

    1985-01-01

    A significant advancement in fuel reprocessing technology has been made by utilizing a multikilowatt, carbon dioxide laser to perform cutting operations necessary to remove unprocessible hardware from reactor fuel assemblies. 10 figs.

  13. Freon, T-B1 cutting fluid

    NASA Technical Reports Server (NTRS)

    Peters, R. L.

    1969-01-01

    Improved cutting fluid completely controls the heat generated from machining operations, thus providing longer tool life. Fluid is especially useful in the working of plastics and replaces less efficient contaminating oils.

  14. Cutting single-walled carbon nanotubes

    NASA Astrophysics Data System (ADS)

    Ziegler, Kirk J.; Gu, Zhenning; Shaver, Jonah; Chen, Zheyi; Flor, Erica L.; Schmidt, Daniel J.; Chan, Candace; Hauge, Robert H.; Smalley, Richard E.

    2005-07-01

    A two-step process is utilized for cutting single-walled carbon nanotubes (SWNTs). The first step requires the breakage of carbon-carbon bonds in the lattice while the second step is aimed at etching at these damage sites to create short, cut nanotubes. To achieve monodisperse lengths from any cutting strategy requires control of both steps. Room-temperature piranha and ammonium persulfate solutions have shown the ability to exploit the damage sites and etch SWNTs in a controlled manner. Despite the aggressive nature of these oxidizing solutions, the etch rate for SWNTs is relatively slow and almost no new sidewall damage is introduced. Carbon-carbon bond breakage can be introduced through fluorination to ~C2F, and subsequent etching using piranha solutions has been shown to be very effective in cutting nanotubes. The final average length of the nanotubes is approximately 100 nm with carbon yields as high as 70-80%.

  15. New opportunities for cutting with lasers.

    PubMed

    Renner, Thomas; Mairhörmann, Dieter

    2004-01-01

    Laser microcutting is a leading technology for the manufacture of surgical instruments and medical implants. This article assesses its capabilities for stents and surgical-needle manufacture and for other tube-cutting applications that require microscaled designs.

  16. 33 CFR 117.161 - Honker Cut.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... OPERATION REGULATIONS Specific Requirements California § 117.161 Honker Cut. The draw of the San Joaquin... signal if at least 12 hours notice is given to the San Joaquin County Department of Public Works...

  17. 33 CFR 117.161 - Honker Cut.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... OPERATION REGULATIONS Specific Requirements California § 117.161 Honker Cut. The draw of the San Joaquin... signal if at least 12 hours notice is given to the San Joaquin County Department of Public Works...

  18. 33 CFR 117.143 - Bishop Cut.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... OPERATION REGULATIONS Specific Requirements California § 117.143 Bishop Cut. The draw of the San Joaquin... hours notice is given to the San Joaquin County Department of Public Works at Stockton....

  19. 33 CFR 117.161 - Honker Cut.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... OPERATION REGULATIONS Specific Requirements California § 117.161 Honker Cut. The draw of the San Joaquin... signal if at least 12 hours notice is given to the San Joaquin County Department of Public Works...

  20. 33 CFR 117.161 - Honker Cut.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... OPERATION REGULATIONS Specific Requirements California § 117.161 Honker Cut. The draw of the San Joaquin... signal if at least 12 hours notice is given to the San Joaquin County Department of Public Works...

  1. 33 CFR 117.143 - Bishop Cut.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... OPERATION REGULATIONS Specific Requirements California § 117.143 Bishop Cut. The draw of the San Joaquin... hours notice is given to the San Joaquin County Department of Public Works at Stockton....

  2. 33 CFR 117.143 - Bishop Cut.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... OPERATION REGULATIONS Specific Requirements California § 117.143 Bishop Cut. The draw of the San Joaquin... hours notice is given to the San Joaquin County Department of Public Works at Stockton....

  3. 33 CFR 117.143 - Bishop Cut.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... OPERATION REGULATIONS Specific Requirements California § 117.143 Bishop Cut. The draw of the San Joaquin... hours notice is given to the San Joaquin County Department of Public Works at Stockton....

  4. Microbiological status of fresh beef cuts.

    PubMed

    Stopforth, J D; Lopes, M; Shultz, J E; Miksch, R R; Samadpour, M

    2006-06-01

    Fresh beef samples (n = 1,022) obtained from two processing plants in the Midwest (July to December 2003) were analyzed for levels of microbial populations (total aerobic plate count, total coliform count, and Escherichia coli count) and for the presence or absence of E. coli O157:H7 and Salmonella. A fresh beef cut sample was a 360-g composite of 6-g portions excised from the surface of 60 individual representative cuts in a production lot. Samples of fresh beef cuts yielded levels of 4.0 to 6.2, 1.1 to 1.8, and 0.8 to 1.0 log CFU/g for total aerobic plate count, total coliform count, and E. coli count, respectively. There did not appear to be substantial differences or obvious trends in bacterial populations on different cuts. These data may be useful in establishing a baseline or a benchmark of microbiological levels of contamination of beef cuts. Mean incidence rates of E. coli O157:H7 and Salmonella on raw beef cuts were 0.3 and 2.2%, respectively. Of the 1,022 samples analyzed, cuts testing positive for E. coli O157:H7 included top sirloin butt (0.9%) and butt, ball tip (2.1%) and for Salmonella included short loins (3.4%), strip loins (9.6%), rib eye roll (0.8%), shoulder clod (3.4%), and clod, top blade (1.8%). These data provide evidence of noticeable incidence of pathogens on whole muscle beef and raise the importance of such contamination on product that may be mechanically tenderized. Levels of total aerobic plate count, total coliform count, and E. coli count did not (P > or = 0.05) appear to be associated with the presence of E. coli O157:H7 and Salmonella on fresh beef cuts. E. O157:H7 was exclusively isolated from cuts derived from the sirloin area of the carcass. Salmonella was exclusively isolated from cuts derived from the chuck, rib, and loin areas of the carcass. Results of this study suggest that contamination of beef cuts may be influenced by the region of the carcass from which they are derived.

  5. Material cutting, shaping, and forming: A compilation

    NASA Technical Reports Server (NTRS)

    1974-01-01

    Information is presented concerning cutting, shaping, and forming of materials, and the equipment and techniques required for utilizing these materials. The use of molds, electrical fields, and mechanical devices are related to forming materials. Material cutting methods by devices including borers and slicers are presented along with chemical techniques. Shaping and fabrication techniques are described for tubing, honeycomb panels, and ceramic structures. The characteristics of the materials are described. Patent information is included.

  6. Cutting Symmetrical Recesses In Soft Ceramic Tiles

    NASA Technical Reports Server (NTRS)

    Nesotas, Tony C.; Tyler, Brent

    1989-01-01

    Simple tool cuts hemispherical recesses in soft ceramic tiles. Designed to expose wires of thermocouples embedded in tiles without damaging leads. Creates neat, precise holes around wires. End mill includes axial hole to accommodate thermocouple wires embedded in material to be cut. Wires pass into hole without being bent or broken. Dimensions in inches. Used in place of such tools as dental picks, tweezers, spatulas, and putty knives.

  7. New law to cut 1986 budgets

    NASA Astrophysics Data System (ADS)

    Katzoff, Judith A.

    The National Aeronautics and Space Administration (NASA), the National Oceanic and Atmospheric Administration (NOAA), the National Science Foundation (NSF), and the U.S. Geological Survey (USGS) are among the agencies whose budgets are likely to be cut 4.3% on March 1, 1986, when the Balanced Budget and Emergency Deficit Control Act of 1985 makes its first impact.Under the law, the cuts will be implemented across the board by an order from the president. Unless Congress passes legislation to make its own cuts sometime between now and March 1, these cuts will automatically take an equal percentage from every nondefense program, project, and activity not protected from “sequestration” of funds and will automatically take a slightly higher percentage from the unprotected portions of the defense budget. Individual agencies could circumvent the across-the-board cuts by formulating their own plans to distribute their share of the reductions; however, these plans would need congressional approval. These cuts will affect budgets for the federal government in fiscal year (FY) 1986, which began on October 1, 1985. Unless revenues increase substantially, additional and mone severe belt-tightening is in store for FY 1987 and beyond.

  8. Quantum Max-flow/Min-cut

    NASA Astrophysics Data System (ADS)

    Cui, Shawn X.; Freedman, Michael H.; Sattath, Or; Stong, Richard; Minton, Greg

    2016-06-01

    The classical max-flow min-cut theorem describes transport through certain idealized classical networks. We consider the quantum analog for tensor networks. By associating an integral capacity to each edge and a tensor to each vertex in a flow network, we can also interpret it as a tensor network and, more specifically, as a linear map from the input space to the output space. The quantum max-flow is defined to be the maximal rank of this linear map over all choices of tensors. The quantum min-cut is defined to be the minimum product of the capacities of edges over all cuts of the tensor network. We show that unlike the classical case, the quantum max-flow=min-cut conjecture is not true in general. Under certain conditions, e.g., when the capacity on each edge is some power of a fixed integer, the quantum max-flow is proved to equal the quantum min-cut. However, concrete examples are also provided where the equality does not hold. We also found connections of quantum max-flow/min-cut with entropy of entanglement and the quantum satisfiability problem. We speculate that the phenomena revealed may be of interest both in spin systems in condensed matter and in quantum gravity.

  9. Fabrication of low cost cutting wheel via thermal spray process

    NASA Astrophysics Data System (ADS)

    Anasyida, A. S.; Nurulakmal, M. S.

    2012-09-01

    The present study is mainly focused on development of metal cutting wheel. The process involved hard particles (abrasives) being bonded on the wheel to enhance the cutting capability by thermal spraying process and followed by polymer bonding. The purpose of this work is to produce low cost cutting wheel and study the performance of cutting behavior. Two different types of powders; silicon carbide (SiC) as bonding agent and chromium carbide (Cr3C2) as abrasives were used. Wear loss and depth of cut as function of load, cutting time and cutting speed were evaluated. The results showed that the speed and load were the main factors that affected the cutting efficiency and the optimum cutting process can be performed at low cutting speed and high load or at high cutting speed and low load.

  10. Plasma Cutting and Carbon-Arc Cutting. Welding Module 8. Instructor's Guide.

    ERIC Educational Resources Information Center

    Missouri Univ., Columbia. Instructional Materials Lab.

    This guide is intended to assist vocational educators in teaching the two units of a module in operating plasma cutting and carbon-arc cutting equipment. The module is part of a welding curriculum that has been designed to be totally integrated with Missouri's Vocational Instruction Management System. The materials included in the module have been…

  11. Effect of Cutting Velocity / Stem Size on the Efficiency of NRCRI Cassave Stem Cutting Machine

    NASA Astrophysics Data System (ADS)

    Ikejiofor, M. C.

    2012-11-01

    The developed NRCRI (National Root Crops Research Institute) cassava stem cutting machine was evaluated. The cassava stems from the variety TME 419 were used. The sizes of the stem used were 1.8, 2.0, 2.3 and 2.6cm. Also, different cutting velocities of 1.20, 1.23 and 1.32m/s were used. The stakes produced has length of 2.5cm. Analysis of variance in RCBD was used to evaluate the effect of the cutting velocity and the stem size on the efficiency of the cutting machine. The result of the analysis showed that the cutting velocity had very highly significant effect, while the stem size had no significant effect at 5% level on the efficiency of the cutting machine. The data obtained also showed that the highest and least cutting efficiencies of 99.42 and 94.71% were obtained with the machine cutting velocities of 1.2 and 1.32m/s respectively.

  12. Rationalizing IT Rationing: 10 Ways to Cut the IT Budget (and What Not to Cut)

    ERIC Educational Resources Information Center

    Miller, Fred

    2009-01-01

    Whether because of falling stock values affecting institutional endowments, cutbacks in state spending, or declines in private giving, higher education has reduced spending, and information technology (IT) organizations have participated in the budget cuts. This is the tale of one institution's quest to cut technology costs while maintaining a…

  13. Budget Cuts: Financial Aid Offices Face Budget Cuts and Increasing Workload. Quick Scan Survey Results

    ERIC Educational Resources Information Center

    National Association of Student Financial Aid Administrators (NJ1), 2010

    2010-01-01

    The majority of college financial aid offices have seen cuts to their operating budgets this year compared to the 2007-08 academic year when the recession began, according to the National Association of Student Financial Aid Administrator's latest QuickScan Survey. Sixty-two percent of financial aid offices reported operating budget cuts this year…

  14. SIGPI. Fault Tree Cut Set System Performance

    SciTech Connect

    Patenaude, C.J.

    1992-01-13

    SIGPI computes the probabilistic performance of complex systems by combining cut set or other binary product data with probability information on each basic event. SIGPI is designed to work with either coherent systems, where the system fails when certain combinations of components fail, or noncoherent systems, where at least one cut set occurs only if at least one component of the system is operating properly. The program can handle conditionally independent components, dependent components, or a combination of component types and has been used to evaluate responses to environmental threats and seismic events. The three data types that can be input are cut set data in disjoint normal form, basic component probabilities for independent basic components, and mean and covariance data for statistically dependent basic components.

  15. SIGPI. Fault Tree Cut Set System Performance

    SciTech Connect

    Patenaude, C.J.

    1992-01-14

    SIGPI computes the probabilistic performance of complex systems by combining cut set or other binary product data with probability information on each basic event. SIGPI is designed to work with either coherent systems, where the system fails when certain combinations of components fail, or noncoherent systems, where at least one cut set occurs only if at least one component of the system is operating properly. The program can handle conditionally independent components, dependent components, or a combination of component types and has been used to evaluate responses to environmental threats and seismic events. The three data types that can be input are cut set data in disjoint normal form, basic component probabilities for independent basic components, and mean and covariance data for statistically dependent basic components.

  16. Imaging, cutting, and collecting instrument and method

    DOEpatents

    Tench, R.J.; Siekhaus, W.J.; Balooch, M.; Balhorn, R.L.; Allen, M.J.

    1995-10-31

    Instrumentation and techniques are described to image small objects, such as but not limited to individual human chromosomes, with nanometer resolution. This instrument and method are also used to cut-off identified parts of objects, to move around and manipulate the cut-off parts on the substrate on which they are being imaged to predetermined locations on the substrate, and to remove the cut-off parts from the substrate. This is accomplished using an atomic force microscope (AFM) and by modification of the conventional cantilever stylus assembly of an AFM. The plural cantilevers are used with either sharp-tips or knife-edges. In addition, the invention can be utilized for measuring the hardness of materials. 10 figs.

  17. Fault Tree Cut Set System Performance.

    2000-02-21

    Version 00 SIGPI computes the probabilistic performance of complex systems by combining cut set or other binary product data with probability information on each basic event. SIGPI is designed to work with either coherent systems, where the system fails when certain combinations of components fail, or noncoherent systems, where at least one cut set occurs only if at least one component of the system is operating properly. The program can handle conditionally independent components, dependentmore » components, or a combination of component types and has been used to evaluate responses to environmental threats and seismic events. The three data types that can be input are cut set data in disjoint normal form, basic component probabilities for independent basic components, and mean and covariance data for statistically dependent basic components.« less

  18. Metal Cutting for Large Component Removal

    SciTech Connect

    Hulick, Robert M.

    2008-01-15

    Decommissioning of commercial nuclear power plants presents technological challenges. One major challenge is the removal of large components mainly consisting of the reactor vessel, steam generators and pressurizer. In order to remove and package these large components nozzles must be cut from the reactor vessel to precise tolerances. In some cases steam generators must be segmented for size and weight reduction. One innovative technology that has been used successfully at several commercial nuclear plant decommissioning is diamond wire sawing. Diamond wire sawing is performed by rotating a cable with diamond segments attached using a flywheel approximately 24 inches in diameter driven remotely by a hydraulic pump. Tension is provided using a gear rack drive which also takes up the slack in the wire. The wire is guided through the use of pulleys keeps the wire in a precise location. The diamond wire consists of 1/4 inch aircraft cable with diamond beads strung over the cable separated by springs and brass crimps. Standard wire contains 40 diamond beads per meter and can be made to any length. Cooling the wire and controlling the spread of contamination presents significant challenges. Under normal circumstances the wire is cooled and the cutting kerf cleaned by using water. In some cases of reactor nozzle cuts the use of water is prohibited because it cannot be controlled. This challenge was solved by using liquid Carbon Dioxide as the cooling agent. The liquid CO{sub 2} is passed through a special nozzle which atomizes the liquid into snowflakes which is introduced under pressure to the wire. The snowflakes attach to the wire keeping it cool and to the metal shavings. As the CO{sub 2} and metal shavings are released from the wire due to its fast rotation, the snowflakes evaporate leaving only the fine metal shavings as waste. Secondary waste produced is simply the small volume of fine metal shavings removed from the cut surface. Diamond wire sawing using CO{sub 2

  19. Cutting fluid study for single crystal silicon

    SciTech Connect

    Chargin, D.

    1998-05-05

    An empirical study was conducted to evaluate cutting fluids for Single Point Diamond Turning (SPDT) of single crystal silicon. The pH of distilled waster was adjusted with various additives the examine the effect of pH on cutting operations. Fluids which seemed to promote ductile cutting appeared to increase tool wear as well, an undesirable tradeoff. High Ph sodium hydroxide solutions showed promise for further research, as they yielded the best combination of reduced tool wear and good surface finish in the ductile regime. Negative rake tools were verified to improve the surface finish, but the negative rake tools used in the experiments also showed much higher wear than conventional 0{degree} rake tools. Effects of crystallographic orientation on SPDT, such as star patterns of fracture damage forming near the center of the samples, were observed to decrease with lower feedrates. Silicon chips were observed and photographed, indicative of a ductile materials removal process.

  20. Approaches to cutting/packing problems

    SciTech Connect

    Arenales, M.; Morabito, R.

    1994-12-31

    Cutting and Packing Problems (CPP) consist of geometrically combining ordered pieces into large objects such that an objective function is optimized. Depending on the number of dimensions involved, we may have one-dimensional CPP (e.g. Bin Packing Problem), two-dimensional CPP (e.g. Pallet Loading Problem), three-dimensional CPP (e.g. Container Loading Problem), and so on. The authors proposed a solution approach to two-dimensional guillotine cutting problems, and extended it to constrained three-dimensional problems. This approach, based on an and/or-graph representation of the solution space, can also be applied to non-guillotine cutting problems. This present work unifies and generalizes the previous ones.

  1. Clustering Fiber Traces Using Normalized Cuts

    PubMed Central

    Brun, Anders; Knutsson, Hans; Park, Hae-Jeong; Shenton, Martha E.; Westin, Carl-Fredrik

    2010-01-01

    In this paper we present a framework for unsupervised segmentation of white matter fiber traces obtained from diffusion weighted MRI data. Fiber traces are compared pairwise to create a weighted undirected graph which is partitioned into coherent sets using the normalized cut (N cut) criterion. A simple and yet effective method for pairwise comparison of fiber traces is presented which in combination with the N cut criterion is shown to produce plausible segmentations of both synthetic and real fiber trace data. Segmentations are visualized as colored stream-tubes or transformed to a segmentation of voxel space, revealing structures in a way that looks promising for future explorative studies of diffusion weighted MRI data. PMID:20209048

  2. Homicidal Cut Throat: The Forensic Perspective

    PubMed Central

    Samaraweera, Jeewana C

    2016-01-01

    The forensic pathologists have a challenging task during the ascertainment of the manner of death in cut throat injuries when presented with no proper history or witnesses. We report a rare homicide, where a person was killed by the father of his gay partner. A 51-year-old married man was found dead in his car on the driving seat at a road. There were blood stains on the dash board and windscreen. No weapon had been recovered. At autopsy, a deep, oblique, long incised injury was found on the front of the neck. There were no hesitant or defense injuries. The cause of death was cut throat. The findings were compatible with a homicidal cut throat by a right handed person from behind after head being restrained firmly. Findings were compatible with the history provided by the suspect. PMID:27134896

  3. Flow stress model in metal cutting

    NASA Technical Reports Server (NTRS)

    Black, J. T.

    1978-01-01

    A model for the plastic deformation that occurs in metal cutting, based on dislocation mechanics, is presented. The model explains the fundamental deformation structure that develops during machining and is based on the well known Cottrell-Stokes Law, wherein the flow stress is partitioned into two parts; an athermal part which occurs in the shear fronts (or shear bands); and a thermal part which occurs in the lamella regions. The deformation envokes the presence of a cellular dislocation distribution which always exists in the material ahead of the shear process. This 'alien' dislocation distribution either exists in the metal prior to cutting or is produced by the compressive stress field which operates in front of the shear process. The magnitude of the flow stress and direction of the shear are shown to be correlated to the stacking fault energy of the metal being cut. The model is tested with respect to energy consumption rates and found to be consistent with observed values.

  4. Space-cutting model of hydroxyapatite.

    PubMed

    Okazaki, M; Sato, M; Takahashi, J

    1995-01-01

    The possibility of substitution of trace elements such as Mg2+, Sr2+ and Ba2+ into the columnar Ca2+ positions of hydroxyapatite was examined by computer graphics with a personal computer and a space-cutting method. Data on the structural coordinates of the hydroxyapatite were put into a protein graphics program in Angstrom units. The connection of each element, with front and rear, was displayed by the shade-line erasing method, and the solidity of the image was expressed by the degree of lightness from the light source. The space-cutting model was obtained by selecting the cutting plane with three atoms in the crystal. Rotating the graphics freely around the X, Y and Z axes gives a view from any direction. The computer graphics suggested visually how the lattice dimensions expand with Sr2+ and Ba2+ substitution and contract with Mg2+ substitution.

  5. Genetic engineering for cut-flower improvement.

    PubMed

    Zuker, A; Tzfira, T; Vainstein, A

    1998-01-01

    The application of modern biotechnological approaches to cut flowers has clearly become instrumental and rewarding for the floriculture industry. In recent years, several gene-transfer procedures have been developed for some of the major commercial cut flowers. Using Agrobactrium or microprojectile bombardment, several basic protocols are now available. However, despite the great progress and interest in gene transfer to these crops, their transformation is routine in only a limited number of laboratories, and its application is still considered to be an "art form". This review summarizes the reported gene-transfer procedures for the main cut-flower crops, with an emphasis on the unique factors of each method and the recent progress in introducing new traits of horticultural interest into these species.

  6. 43 CFR 5463.1 - Time for cutting and removal.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... MANAGEMENT, DEPARTMENT OF THE INTERIOR FOREST MANAGEMENT (5000) SALES ADMINISTRATION Expiration of Time for Cutting and Removal § 5463.1 Time for cutting and removal. Time for cutting and removal of timber or other... 43 Public Lands: Interior 2 2011-10-01 2011-10-01 false Time for cutting and removal....

  7. 7 CFR 58.413 - Cutting and packaging rooms.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Cutting and packaging rooms. 58.413 Section 58.413....413 Cutting and packaging rooms. When small packages of cheese are cut and wrapped, separate rooms... outward to minimize the entrance of unfiltered air into the cutting and packaging room. The...

  8. 43 CFR 5463.1 - Time for cutting and removal.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... MANAGEMENT, DEPARTMENT OF THE INTERIOR FOREST MANAGEMENT (5000) SALES ADMINISTRATION Expiration of Time for Cutting and Removal § 5463.1 Time for cutting and removal. Time for cutting and removal of timber or other... 43 Public Lands: Interior 2 2014-10-01 2014-10-01 false Time for cutting and removal....

  9. 43 CFR 5463.1 - Time for cutting and removal.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... MANAGEMENT, DEPARTMENT OF THE INTERIOR FOREST MANAGEMENT (5000) SALES ADMINISTRATION Expiration of Time for Cutting and Removal § 5463.1 Time for cutting and removal. Time for cutting and removal of timber or other... 43 Public Lands: Interior 2 2012-10-01 2012-10-01 false Time for cutting and removal....

  10. 43 CFR 5463.1 - Time for cutting and removal.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... MANAGEMENT, DEPARTMENT OF THE INTERIOR FOREST MANAGEMENT (5000) SALES ADMINISTRATION Expiration of Time for Cutting and Removal § 5463.1 Time for cutting and removal. Time for cutting and removal of timber or other... 43 Public Lands: Interior 2 2013-10-01 2013-10-01 false Time for cutting and removal....

  11. Modified atmosphere packaging for fresh-cut fruits and vegetables

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The latest development in and different aspects of modified atmosphere packaging for fresh-cut fruits and vegetables are reviewed in the book. This book provides all readers, including fresh-cut academic researchers, fresh-cut R&D personnel, and fresh-cut processing engineers, with unique, essential...

  12. 21 CFR 882.4275 - Dowel cutting instrument.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Dowel cutting instrument. 882.4275 Section 882...) MEDICAL DEVICES NEUROLOGICAL DEVICES Neurological Surgical Devices § 882.4275 Dowel cutting instrument. (a) Identification. A dowel cutting instrument is a device used to cut dowels of bone for bone grafting....

  13. 49 CFR 213.352 - Torch cut rail.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 4 2014-10-01 2014-10-01 false Torch cut rail. 213.352 Section 213.352... Torch cut rail. (a) Except as a temporary repair in emergency situations no rail having a torch cut end shall be used. When a rail end with a torch cut is used in emergency situations, train speed over...

  14. 49 CFR 213.352 - Torch cut rail.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 4 2011-10-01 2011-10-01 false Torch cut rail. 213.352 Section 213.352... Torch cut rail. (a) Except as a temporary repair in emergency situations no rail having a torch cut end shall be used. When a rail end with a torch cut is used in emergency situations, train speed over...

  15. 49 CFR 213.352 - Torch cut rail.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Torch cut rail. 213.352 Section 213.352... Torch cut rail. (a) Except as a temporary repair in emergency situations no rail having a torch cut end shall be used. When a rail end with a torch cut is used in emergency situations, train speed over...

  16. 49 CFR 213.352 - Torch cut rail.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 4 2012-10-01 2012-10-01 false Torch cut rail. 213.352 Section 213.352... Torch cut rail. (a) Except as a temporary repair in emergency situations no rail having a torch cut end shall be used. When a rail end with a torch cut is used in emergency situations, train speed over...

  17. 49 CFR 213.352 - Torch cut rail.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 4 2013-10-01 2013-10-01 false Torch cut rail. 213.352 Section 213.352... Torch cut rail. (a) Except as a temporary repair in emergency situations no rail having a torch cut end shall be used. When a rail end with a torch cut is used in emergency situations, train speed over...

  18. 7 CFR 58.413 - Cutting and packaging rooms.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 3 2011-01-01 2011-01-01 false Cutting and packaging rooms. 58.413 Section 58.413....413 Cutting and packaging rooms. When small packages of cheese are cut and wrapped, separate rooms... outward to minimize the entrance of unfiltered air into the cutting and packaging room. The...

  19. Photothermal nanoblade for patterned cell membrane cutting

    PubMed Central

    Wu, Ting-Hsiang; Teslaa, Tara; Teitell, Michael A.; Chiou, Pei-Yu

    2010-01-01

    We report a photothermal nanoblade that utilizes a metallic nanostructure to harvest short laser pulse energy and convert it into a highly localized and specifically shaped explosive vapor bubble. Rapid bubble expansion and collapse punctures a lightly-contacting cell membrane via high-speed fluidic flows and induced transient shear stress. The membrane cutting pattern is controlled by the metallic nanostructure configuration, laser pulse polarization, and energy. Highly controllable, sub-micron sized circular hole pairs to half moon-like, or cat-door shaped, membrane cuts were realized in glutaraldehyde treated HeLa cells. PMID:21164656

  20. UK physics hit by fresh funding cuts

    NASA Astrophysics Data System (ADS)

    Durrani, Matin

    2009-08-01

    Physicists have reacted angrily to plans by one of the UK's leading research councils to slash funding for a number of key national facilities. The Science and Technology Facilities Council (STFC) will cut support for the Diamond light source and make "reductions in facility operations" at the ISIS neutron source and the Central Laser Facility. STFC chief executive Keith Mason blames the cuts on the fall in the value of the pound, which has led to a 15.1% rise in the STFC's subscriptions to CERN and other international facilities from £214.9m last year to £247.3m in 2009-2010.

  1. Features of plastics edge cutting machining

    NASA Astrophysics Data System (ADS)

    Handozhko, A. V.; Shcherbakov, A. N.; Zaharov, L. A.; Gavrilenko, T. V.

    2016-04-01

    This article describes the features of pieces from thermoplastic materials in the form of electrical insulators cut by a disk edge tool. The problems in question are possible defects arising during machining and technological conditions that reduce their quantity. The necessity of required machining conditions matching substantiated in accordance with a specific grade of the material which is treated. Equipment and machining attachments, developed for experimental studies, determine the rational conditions of plastic electrical insulators machining. As a result of experiments the dependences of cut face quality parameters of plastics are obtained by machining conditions. The obtained results allowed us to make valid conclusions and recommendations.

  2. Photothermal nanoblade for patterned cell membrane cutting.

    PubMed

    Wu, Ting-Hsiang; Teslaa, Tara; Teitell, Michael A; Chiou, Pei-Yu

    2010-10-25

    We report a photothermal nanoblade that utilizes a metallic nanostructure to harvest short laser pulse energy and convert it into a highly localized and specifically shaped explosive vapor bubble. Rapid bubble expansion and collapse punctures a lightly-contacting cell membrane via high-speed fluidic flows and induced transient shear stress. The membrane cutting pattern is controlled by the metallic nanostructure configuration, laser pulse polarization, and energy. Highly controllable, sub-micron sized circular hole pairs to half moon-like, or cat-door shaped, membrane cuts were realized in glutaraldehyde treated HeLa cells. PMID:21164656

  3. Response to White and Cutting critique.

    PubMed

    Hurlow, J

    2012-04-01

    Response to White and Cutting critique In their letter, published in the March issue of JWC, White and Cutting raised concerns about clinical visualisation of wound biofilm in the absence of a definitive assay or validation of visual observations with microscopic confirmation. While I acknowledge that science plays a critical role in extending our knowledge of the role of biofilm in wound healing, clinicians cannot ignore patients' needs, or the patterns we observe as experts in our practice, while we await such scientific developments.

  4. Photothermal nanoblade for patterned cell membrane cutting.

    PubMed

    Wu, Ting-Hsiang; Teslaa, Tara; Teitell, Michael A; Chiou, Pei-Yu

    2010-10-25

    We report a photothermal nanoblade that utilizes a metallic nanostructure to harvest short laser pulse energy and convert it into a highly localized and specifically shaped explosive vapor bubble. Rapid bubble expansion and collapse punctures a lightly-contacting cell membrane via high-speed fluidic flows and induced transient shear stress. The membrane cutting pattern is controlled by the metallic nanostructure configuration, laser pulse polarization, and energy. Highly controllable, sub-micron sized circular hole pairs to half moon-like, or cat-door shaped, membrane cuts were realized in glutaraldehyde treated HeLa cells.

  5. A case of "atypical homicidal" cut-throat injury.

    PubMed

    Kumar S, Ajay; Kumar Ms, Vinay; Babu, Yp Raghavendra; Prasad, Mahadeshwara

    2016-09-01

    Cut-throats can be of homicidal, suicidal or accidental origin. In cases of death from a cut-throat, distinguishing the cause is one of the important functions in crime investigation. The features that differentiate suicidal and homicidal cut-throat injuries are the presence of hesitation cuts, depth of wound, signs of struggle, edges of the wound, etc. In the case of a suicidal cut-throat, it is not uncommon to find hesitation cuts but in a homicidal cut-throat, it is uncommon. We present a case of a homicidal cut-throat injury but with hesitation cuts and tailing over the neck, unlike the classical description of homicidal cut-throat injury. This resulted from a curved, sharp and moderately heavy weapon. PMID:27381317

  6. A case of "atypical homicidal" cut-throat injury.

    PubMed

    Kumar S, Ajay; Kumar Ms, Vinay; Babu, Yp Raghavendra; Prasad, Mahadeshwara

    2016-09-01

    Cut-throats can be of homicidal, suicidal or accidental origin. In cases of death from a cut-throat, distinguishing the cause is one of the important functions in crime investigation. The features that differentiate suicidal and homicidal cut-throat injuries are the presence of hesitation cuts, depth of wound, signs of struggle, edges of the wound, etc. In the case of a suicidal cut-throat, it is not uncommon to find hesitation cuts but in a homicidal cut-throat, it is uncommon. We present a case of a homicidal cut-throat injury but with hesitation cuts and tailing over the neck, unlike the classical description of homicidal cut-throat injury. This resulted from a curved, sharp and moderately heavy weapon.

  7. Uav Onboard Photogrammetry and GPS Positionning for Earthworks

    NASA Astrophysics Data System (ADS)

    Daakir, M.; Pierrot-Deseilligny, M.; Bosser, P.; Pichard, F.; Thom, C.

    2015-08-01

    Over the last decade, Unmanned Airbone Vehicles (UAVs) have been largely used for civil applications. Airborne photogrammetry has found place in these applications not only for 3D modeling but also as a measurement tool. Vinci-Construction-Terrassement is a private company specialized in public works sector and uses airborn photogrammetry as a mapping solution and metrology investigation tool on its sites. This technology is very efficient for the calculation of stock volumes for instance, or for time tracking of specific areas with risk of landslides. The aim of the present work is to perform a direct georeferencing of images acquired by the camera leaning on an embedded GPS receiver. UAV, GPS receiver and camera used are low-cost models and therefore data processing is adapted to this particular constraint.

  8. Cutting work in thick section cryomicrotomy.

    PubMed

    Saubermann, A J; Riley, W D; Beeuwkes, R

    1977-09-01

    The forces during cryosectioning were measured using miniature strain gauges attached to a load cell fitted to the drive arm of the Porter-Blum MT-2 cryomicrotome. Work was calculated and the data normalized to a standard (1 mm X 1 mm X 0.5 micrometer) section. Thermal energy generated was also calculated. Five parameters were studied: cutting angle, thickness, temperature, hardness, and block shape. Force patterns could be divided into three major groups thought to represent cutting (Type I), large fracture planes greater than 10 micrometer in length (Type II), and small fracture planes less than 10 micrometer in length (Type III). Type I and Type II produced satisfactory sections. Work in cutting ranged from an average of 78.4 muJ to 568.8 muJ. Cutting angle and temperature had the greatest effect on sectioning. Heat generated would be sufficient to cause through-section melting for 0.5 micrometer thick sections assuming the worst possible case, namely that all heat went into the section without loss. Presence of a Type II pattern (large fracture pattern) is thought to be presumptive evidence against thawing. PMID:606833

  9. Measuring Contours of Coal-Seam Cuts

    NASA Technical Reports Server (NTRS)

    1983-01-01

    Angle transducers measure angle between track sections as longwall shearer proceeds along coal face. Distance transducer functions in conjunction with angle transducers to obtain relative angles at known positions. When cut is complete, accumulated data are stored on cassette tape, and track profile is computed and displayed. Micro-processor-based instrument integrates small changes in angle and distance.

  10. Does School District Consolidation Cut Costs?

    ERIC Educational Resources Information Center

    Duncombe, William; Yinger, John

    2007-01-01

    Consolidation has dramatically reduced the number of school districts in the United States. Using data from rural school districts in New York, this article provides the first direct estimation of consolidation's cost impacts. We find economies of size in operating spending: all else equal, doubling enrollment cuts operating costs per pupil by…

  11. Operation and maintenance cost-cutting

    SciTech Connect

    Hollingshead, T.W.

    1996-12-31

    This presentation by Timothy W. Hollingshead, Technical Services Manager, Pacific Gas and Electric, is about cutting costs in the Operation and Maintenance phase of geothermal energy production. The necessity of cost control, keeping workers well-trained and avoiding OSHA fines, taking advantages of new technologies, and establishing predictive maintenance programs are some of the issues discussed in this article.

  12. Ribbon cutting opens new ELV offices

    NASA Technical Reports Server (NTRS)

    2000-01-01

    Bobby Bruckner, manager, ELV and Payload Carrier Programs, speaks at the ribbon-cutting ceremony of the E&O Building at KSC. Home for NASA's unmanned missions since 1964, the building has been renovated to house the Expendable Launch Vehicle Program.

  13. Automated Cutting And Drilling Of Composite Parts

    NASA Technical Reports Server (NTRS)

    Warren, Charles W.

    1993-01-01

    Proposed automated system precisely cuts and drills large, odd-shaped parts made of composite materials. System conceived for manufacturing lightweight composite parts to replace heavier parts in Space Shuttle. Also useful in making large composite parts for other applications. Includes robot locating part to be machined, positions cutter, and positions drill. Gantry-type robot best suited for task.

  14. SNAP Cuts Put Youth at Risk

    ERIC Educational Resources Information Center

    Lower-Basch, Elizabeth

    2013-01-01

    In a typical month in 2011, the Supplemental Nutrition Assistance Program (SNAP, formerly known as the Food Stamp Program) served 4.3 million low-income young adults ages 18-24, helping them buy needed groceries. This brief report demonstrates the detrimental impact the cuts proposed to SNAP in the House-passed Farm bill (H.R. 3102)--which is now…

  15. Mechanical cutting of irradiated reactor internal components

    SciTech Connect

    Anderson, Michael G.

    2008-01-15

    Mechanical cutting methods to volume reduce and package reactor internal components are now a viable solution for stakeholders challenged with the retirement of first generation nuclear facilities. The recent completion of the removal of the Reactor Vessel Internals (RVI) from within the Sacramento Municipal Utility District's (SMUD) Rancho Seco Nuclear Power Plant demonstrates that unlike previous methods, inclusive of plasma arc and abrasive water-jet cutting, mechanical cutting minimizes exposure to workers, costly water cleanup, and excessive secondary waste generation. Reactor internal components were segmented, packaged, and removed from the reactor building for shipment or storage, allowing the reactor cavity to be drained and follow-on reactor segmentation activities to proceed in the dry state. Area exposure rates at the work positions during the segmentation process were generally 1 mR per hr. Radiological exposure documented for the underwater segmentation processes totaled 13 person rem. The reactor internals weighing 343,000 pounds were segmented into over 200 pieces for maximum shipping package efficiency and produced 5,600 lb of stainless steel chips and shavings which were packaged in void spaces of existing disposal containers, therefore creating no additional disposal volume. Because no secondary waste was driven into suspension in the reactor cavity water, the water was free released after one pass through a charcoal bed and ion exchange filter system. Mechanical cutting techniques are capable of underwater segmentation of highly radioactive components on a large scale. This method minimized radiological exposure and costly water cleanup while creating no secondary waste.

  16. Researchers warn of 'worrying imprudence' over cuts

    NASA Astrophysics Data System (ADS)

    Cartlidge, Edwin

    2012-08-01

    Italian physicists reacted with anger to proposed cuts to the country's research funding. Particularly hard hit would be the National Institute of Nuclear Physics (INFN), which has been slated to absorb nearly half of the €120m reduction in the research ministry's budget as outlined in a decree on 6 July.

  17. What Happens when Media Positions Are Cut?

    ERIC Educational Resources Information Center

    Anderson, Mary Alice

    2011-01-01

    Cuts abound despite an infusion of technology, restructured media programs, and research connecting media specialists to improved student achievement. Verbal and written support about the value of a library or media specialist has not translated into monetary support at a time of universal funding problems. All grade levels and district sizes are…

  18. How the Budget Cuts Undercut Rural Women.

    ERIC Educational Resources Information Center

    Clark, Jane

    This study describes the status of 34 million rural women and analyzes how they and their families will be directly affected by cuts in the 1983 federal budget in the areas of legal services, vocational education, domestic violence intervention, energy assistance and alternative energy development, public housing, unemployment compensation, social…

  19. Metrics for Food Preparation, Baking, Meat Cutting.

    ERIC Educational Resources Information Center

    Cooper, Gloria S., Ed.; Magisos, Joel H., Ed.

    Designed to meet the job-related metric measurement needs of food preparation, baking, meat cutting students, this instructional package is one of five for the home economics occupations cluster, part of a set of 55 packages for metric instruction in different occupations. The package is intended for students who already know the occupational…

  20. The Cutting Edge, 1999-2000.

    ERIC Educational Resources Information Center

    Cutting Edge, 2000

    2000-01-01

    The Cutting Edge is a bimonthly newsletter of the Regional Center for Applied Technology and Training at Danville Community College (DCC) (Virginia) that provides the latest information on a wide range of issues including technology, business, employment trends, and new legislation. Articles from the first five issues discuss: (1) the July 2000…

  1. Dental abrasion as a cutting process.

    PubMed

    Lucas, Peter W; Wagner, Mark; Al-Fadhalah, Khaled; Almusallam, Abdulwahab S; Michael, Shaji; Thai, Lidia A; Strait, David S; Swain, Michael V; van Casteren, Adam; Renno, Waleed M; Shekeban, Ali; Philip, Swapna M; Saji, Sreeja; Atkins, Anthony G

    2016-06-01

    A mammalian tooth is abraded when a sliding contact between a particle and the tooth surface leads to an immediate loss of tooth tissue. Over time, these contacts can lead to wear serious enough to impair the oral processing of food. Both anatomical and physiological mechanisms have evolved in mammals to try to prevent wear, indicating its evolutionary importance, but it is still an established survival threat. Here we consider that many wear marks result from a cutting action whereby the contacting tip(s) of such wear particles acts akin to a tool tip. Recent theoretical developments show that it is possible to estimate the toughness of abraded materials via cutting tests. Here, we report experiments intended to establish the wear resistance of enamel in terms of its toughness and how friction varies. Imaging via atomic force microscopy (AFM) was used to assess the damage involved. Damage ranged from pure plastic deformation to fracture with and without lateral microcracks. Grooves cut with a Berkovich diamond were the most consistent, suggesting that the toughness of enamel in cutting is 244 J m(-2), which is very high. Friction was higher in the presence of a polyphenolic compound, indicating that this could increase wear potential. PMID:27274807

  2. Staff Cuts Remake the Custodial Closet.

    ERIC Educational Resources Information Center

    Fickes, Michael

    2003-01-01

    Suggests that new cleaning and finishing materials and new equipment can help school facility departments cope with staff cuts, focusing on: chemicals and dispensers, safety training and information for custodial staff, cleaning tools and power equipment, and cleaner and more efficient schools. (SM)

  3. The Cutting Edge: Workplace English. Instructional Guide.

    ERIC Educational Resources Information Center

    El Paso Community Coll., TX. Literacy Center.

    The instructional guide for the Cutting Edge workplace literacy program, a cooperative project of El Paso Community College (Texas) and Levi Strauss and Company, is an expanded version of one appendix the project handbook. It describes and provides an instructional model for the three-part, job-specific, video-based program of English as a Second…

  4. Breeding lettuce for fresh-cut processing

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Lettuce is increasingly consumed in fresh-cut packaged salads. New cultivars specifically bred for this use can enhance production and processing efficiency and extend shelf life. Cultivars with novel head architectures and leaf traits are being released by private and public breeding programs with ...

  5. Colleges Protect Workers and Cut Elsewhere

    ERIC Educational Resources Information Center

    Blumenstyk, Goldie

    2009-01-01

    Most colleges have steered through the first jolts of the recession without resorting to layoffs, cutting employee benefits, or imposing across-the-board freezes on hiring. But the economic pain is afflicting campuses in many other ways, according to the findings from a new survey of chief business officers conducted last month by "The Chronicle"…

  6. Lateral stability in sideward cutting movements.

    PubMed

    Stacoff, A; Steger, J; Stüssi, E; Reinschmidt, C

    1996-03-01

    Sideward cutting movements occur frequently in sports activities, such as basketball, soccer, and tennis. These activities show a high incidence of injuries to the lateral aspect of the ankle. Consequently, the lateral stability of sport shoes seems important. The purpose of this study was to show the effect of different shoe sole properties (hardness, thickness, torsional stiffness) and designs on the lateral stability during sideward cutting movements. A film analysis was conducted including 12 subjects performing a cutting movement barefoot and with five different pairs of shoes each filmed in the frontal plane. A standard film analysis was conducted; for the statistical analysis, various parameters such as the range of motion in inversion and the angular velocity of the rearfoot were used. The results showed a large difference between the barefoot and shod conditions with respect to the lateral stability. Two shoes performed significantly better (P < 0.05) than the others with a decreased inversion movement and less slipping inside the shoe. The two shoes differed mainly in the shoe sole design (hollow inner core) and the upper (high-cut). It is concluded that lateral stability may be improved by altering the properties and design of the shoe sole as well as the upper.

  7. Rooting greenwood tip cuttings of several Populus clones hydroponically (hydroponic rooting of Populus cuttings)

    SciTech Connect

    Phipps, H.M.; Hansen, E.A.; Tolsted, D.N.

    1980-01-01

    Greenwood cuttings of several Populus clones were successfully rooted with a relatively simple hydroponic method. Indolebutyric acid and naphthaleneacetic acid at concentrations of 500 to 5000 ppM applied as a quick dip to the cutting bases, a complete nutrient solution at 20 to 40% of full strength, and a solution temperature between 27 and 30/sup 0/C generally produced the best rooting performance of most clones. Cuttings propagated by the hydroponic procedure rooted faster and generally outgrew those produced by a standard method after being transplanted to pots and grown in the greenhouse.

  8. Volatile compound in cut and un-cut flowers of tetraploid Freesia hybrida.

    PubMed

    Ao, Man; Liu, Baofeng; Wang, Li

    2013-01-01

    The flower volatile compounds (FVCs) of two tetraploid Freesia hybrida (pink-yellow and yellow) cultivars and their cut flowers were analysed by headspace solid-phase microextraction combined with gas chromatography-mass spectrometry. Twelve FVCs were identified in the pink-yellow cultivar, with linalool as the major compound; 30 FVCs were identified in the yellow cultivar, with linalool and terpineol as the two major compounds. The FVCs (>1%) of the two cut flower cultivars were very similar to that of the un-cut flowers, and no significant difference was observed.

  9. Electrosurgical device for both mechanical cutting and coagulation of bleeding

    SciTech Connect

    Doss, J.D.; Mc Cabe, C.W.

    1987-03-24

    A surgical instrument is described for cutting and coagulating tissue, the surgical instrument comprising in combination: means for pressure cutting, the pressuring cutting means serving as a first electrode and having a leading edge and a cutting surface, the leading edge of the means for pressure cutting forming the forward portion of the cutting surface; second electrode means set apart from and electrically insulated from the pressure cutting means on the side of the pressure cutting means opposite the cutting surface thereof; means for attaching the second electrode means to the pressure cutting means; and means for providing a voltage between the pressure cutting means the second electrode means whereby an electric current can be made to flow between a portion of the side of the pressure cutting means opposite the cutting surface thereof and the second electrode means, and between the leading edge of the pressure cutting means and the second electrode means through tissue which is located therebetween. The current has sufficient amplitude to cause coagulation therein.

  10. Molecular dynamics simulations of nanometric cutting mechanisms of amorphous alloy

    NASA Astrophysics Data System (ADS)

    Zhu, Peng-Zhe; Qiu, Chen; Fang, Feng-Zhou; Yuan, Dan-Dan; Shen, Xue-Cen

    2014-10-01

    Molecular dynamics simulations are employed to study the nanometric cutting process of Cu50Zr50 amorphous alloy. The effects of cutting depth, cutting speed and tool edge radius on the cutting force, workpiece pile-up and temperature of the cutting region are studied to investigate the mechanisms of the material removal and surface formation in the nanometric cutting process. It is found that the material removal of amorphous alloy workpiece is mainly based on extrusion at the nanoscale instead of shearing at the macroscale. The plastic deformation of amorphous alloy is mainly due to the formation of shear transformation zones during the nanometric cutting process. The results also suggest that bigger cutting depth and cutting speed will lead to larger tangential force and normal force. However, the tool edge radius has a negligible effect on the tangential force although the normal force increases with the increase of tool edge radius. The workpiece pile-up increases with an increase of the cutting depth, but decreases with an increase of the edge radius of the tool. The workpiece pile-up is not significantly affected by the cutting speed. It is also found that larger cutting depth and cutting speed will result in higher temperature in the cutting region of workpiece and the average Newtonian layer temperature of the tool. Tool edge radius has no significant effect on the temperature distribution of the workpiece and the average Newtonian layer temperature of the tool.

  11. Decorating Cutting as New Approach to Machine Tool System Dynamics

    NASA Astrophysics Data System (ADS)

    Murcinkova, Zuzana; Vasilko, Karol

    2014-12-01

    The paper presents so called decorating cutting focused on turning. It uses self-excited vibrations that are typical for turning and other types of cutting operations. The decorating turning do not utilize setting of unstable technological conditions of cutting process but it actively use the acting of cutting force on machine tool without generation of unwanted chatter vibrations. The special tool fixture was developed to utilize self-excited vibrations invoked by periodical changeability of cutting force by cutting process itself. Thus the typical texture of surface appears. The various macro/micro-textures of surfaces can be applied either for decorating purpose or for better holding of oil film.

  12. Laser remote cutting of metallic materials: opportunities and limitations

    NASA Astrophysics Data System (ADS)

    Wetzig, Andreas; Baumann, Robert; Herwig, Patrick; Siebert, René; Beyer, Eckhard

    2015-07-01

    The fundamentals of laser remote cutting will be introduced as well as a comparison to the conventional laser fusion cutting process. The opportunities and limitations of this alternative laser cutting technology will be discussed in detail by means of recent application examples. Here to name cutting of typical punching and bending parts, battery foils, metals foams and electrical steel sheets. Questions that are concerning the cutting thickness, the cutting quality, the cycle time, and the impact on the material will be answered. Finally, conclusions and an outlook on future developments will be presented.

  13. iCut: an Integrative Cut Algorithm Enables Accurate Segmentation of Touching Cells

    PubMed Central

    He, Yong; Gong, Hui; Xiong, Benyi; Xu, Xiaofeng; Li, Anan; Jiang, Tao; Sun, Qingtao; Wang, Simin; Luo, Qingming; Chen, Shangbin

    2015-01-01

    Individual cells play essential roles in the biological processes of the brain. The number of neurons changes during both normal development and disease progression. High-resolution imaging has made it possible to directly count cells. However, the automatic and precise segmentation of touching cells continues to be a major challenge for massive and highly complex datasets. Thus, an integrative cut (iCut) algorithm, which combines information regarding spatial location and intervening and concave contours with the established normalized cut, has been developed. iCut involves two key steps: (1) a weighting matrix is first constructed with the abovementioned information regarding the touching cells and (2) a normalized cut algorithm that uses the weighting matrix is implemented to separate the touching cells into isolated cells. This novel algorithm was evaluated using two types of data: the open SIMCEP benchmark dataset and our micro-optical imaging dataset from a Nissl-stained mouse brain. It has achieved a promising recall/precision of 91.2 ± 2.1%/94.1 ± 1.8% and 86.8 ± 4.1%/87.5 ± 5.7%, respectively, for the two datasets. As quantified using the harmonic mean of recall and precision, the accuracy of iCut is higher than that of some state-of-the-art algorithms. The better performance of this fully automated algorithm can benefit studies of brain cytoarchitecture. PMID:26168908

  14. Cut-constructible part of QCD amplitudes

    SciTech Connect

    Britto, Ruth; Feng Bo; Mastrolia, Pierpaolo

    2006-05-15

    Unitarity cuts are widely used in analytic computation of loop amplitudes in gauge theories such as QCD. We expand upon the technique introduced in hep-ph/0503132 to carry out any finite unitarity cut integral. This technique naturally separates the contributions of bubble, triangle and box integrals in one-loop amplitudes and is not constrained to any particular helicity configurations. Loop momentum integration is reduced to a sequence of algebraic operations. We discuss the extraction of the residues at higher-order poles. Additionally, we offer concise algebraic formulas for expressing coefficients of three-mass triangle integrals. As an application, we compute all remaining coefficients of bubble and triangle integrals for nonsupersymmetric six-gluon amplitudes.

  15. Containing Hair During Cutting In Zero Gravity

    NASA Technical Reports Server (NTRS)

    Haines, Richard F.

    1992-01-01

    Proposed device collects loose hair during barbering and shaving in zero gravity to prevent hair clippings from contaminating cabin of spacecraft. Folds for storage, opens into clear, bubblelike plastic dome surrounding user's head, tray fits around user's throat, and fanlike ring surrounds back of neck. Device fits snugly but comfortably around neck, preventing hair from escaping to outside. Flow of air into hose connected to suction pump removes hair from bubble as cut. Filter at end of hose collects hair.

  16. Robotic Tool For Tightening And Cutting

    NASA Technical Reports Server (NTRS)

    Cooney, Earl T.

    1989-01-01

    Robot end effector designed for tightening tube couplers and for cutting tubes. Tool operable by simple movements and thus manipulated by technician wearing heavy protective clothing. Operates on principle of worm and pinion gear. Intended for use in building structures in space, end effector also used as hand tool for assembling truss structures for terrestrial buildings, tents, and oil rigs. Also used in place of pipe wrench in plumbing work.

  17. Cutting sound enhancement system for mining machines

    SciTech Connect

    Leigh, M.C.; Kwitowski, A.J.

    1991-01-24

    The invention relates to the field of acoustical monitoring in a mining environment in general, and in particular to a system for focusing an acoustical transducer on the cutting head of a mining machine and coupling the output of the transducer to headphones worn by the remotely positioned operator of the machine to assist the operator in audibly detecting the location of the parameters of a coal seam.

  18. Ritual genital cutting of female minors.

    PubMed

    Davis, Dena S

    2010-05-01

    The traditional custom of ritual cutting and alteration of the genitalia of female infants, children, and adolescents, referred to as female genital mutilation or female genital cutting (FGC), persists primarily in Africa and among certain communities in the Middle East and Asia. Immigrants in the United States from areas in which FGC is common may have daughters who have undergone a ritual genital procedure or may request that such a procedure be performed by a physician. The American Academy of Pediatrics believes that pediatricians and pediatric surgical specialists should be aware that this practice has life-threatening health risks for children and women. The American Academy of Pediatrics opposes all types of female genital cutting that pose risks of physical or psychological harm, counsels its members not to perform such procedures, recommends that its members actively seek to dissuade families from carrying out harmful forms of FGC, and urges its members to provide patients and their parents with compassionate education about the harms of FGC while remaining sensitive to the cultural and religious reasons that motivate parents to seek this procedure for their daughters.

  19. High pressure waterjet cutting industrial needs survey

    NASA Astrophysics Data System (ADS)

    Klavuhn, John; Baker, Bruce

    1989-08-01

    The results are presented of a survey conducted by personnel of the National Center for Excellence in Metalworking Technology (NCEMT) to assess the industrial needs in high pressure water jet cutting (WJC) technology. Survey forms were mailed to approximately 1400 individuals obtained from three mailing lists. The respondents included approximately 200 individuals associated with a variety of industries: 12 percent were WJC equipment suppliers, 40 percent were WJC users, and 48 percent were neither suppliers nor users. The survey addressed five specific areas of WJC technology: research and development, standards, systems, new products, and training and service. Results show that the need having the highest priority is the establishment of a database on WJC that contains the cutting parameters for a wide range of materials. Associated with this objective is the expressed need for an independent demonstration and test center for testing, data generation and operator training. A further need was found for establishing organized efforts in hardware development and research in mechanisms of cutting.

  20. Cutting Silica Aerogel for Particle Extraction

    NASA Technical Reports Server (NTRS)

    Tsou, P.; Brownlee, D. E.; Glesias, R.; Grigoropoulos, C. P.; Weschler, M.

    2005-01-01

    The detailed laboratory analyses of extraterrestrial particles have revolutionized our knowledge of planetary bodies in the last three decades. This knowledge of chemical composition, morphology, mineralogy, and isotopics of particles cannot be provided by remote sensing. In order to acquire these detail information in the laboratories, the samples need be intact, unmelted. Such intact capture of hypervelocity particles has been developed in 1996. Subsequently silica aerogel was introduced as the preferred medium for intact capturing of hypervelocity particles and later showed it to be particularly suitable for the space environment. STARDUST, the 4th NASA Discovery mission to capture samples from 81P/Wild 2 and contemporary interstellar dust, is the culmination of these new technologies. In early laboratory experiments of launching hypervelocity projectiles into aerogel, there was the need to cut aerogel to isolate or extract captured particles/tracks. This is especially challenging for space captures, since there will be many particles/tracks of wide ranging scales closely located, even collocated. It is critical to isolate and extract one particle without compromising its neighbors since the full significance of a particle is not known until it is extracted and analyzed. To date, three basic techniques have been explored: mechanical cutting, lasers cutting and ion beam milling. We report the current findings.

  1. DETAIL OF CUTTING ROLLS ON #72 BRASS MILL SLITTER, ONE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    DETAIL OF CUTTING ROLLS ON #72 BRASS MILL SLITTER, ONE OF THREE CURRENTLY IN OPERATION. BRASS STRIP IS CUT TO CUSTOMER ORDER; COPPER STRIP IS PRODUCED IN STANDARD SIZES. - American Brass Foundry, 70 Sayre Street, Buffalo, Erie County, NY

  2. Finite pure integer programming algorithms employing only hyperspherically deduced cuts

    NASA Technical Reports Server (NTRS)

    Young, R. D.

    1971-01-01

    Three algorithms are developed that may be based exclusively on hyperspherically deduced cuts. The algorithms only apply, therefore, to problems structured so that these cuts are valid. The algorithms are shown to be finite.

  3. When you are drinking too much - tips for cutting back

    MedlinePlus

    Alcohol - drinking too much; Alcohol use disorder - drinking too much; Alcohol abuse - drinking too much; Risky drinking - cutting back ... This can help you cut back on your alcohol use. Keep track of how much you drink ...

  4. DETAIL VIEW OF CUTTING ROOMS SHOWING CULLETT CHUTES FOR WASTE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    DETAIL VIEW OF CUTTING ROOMS SHOWING CULLETT CHUTES FOR WASTE GLASS, LOOKING EAST - Chambers Window Glass Company, Cutting Room, North of Drey (Nineteenth) Street, West of Constitution Boulevard, Arnold, Westmoreland County, PA

  5. Influence of cutting parameters on the depth of subsurface deformed layer in nano-cutting process of single crystal copper.

    PubMed

    Wang, Quanlong; Bai, Qingshun; Chen, Jiaxuan; Su, Hao; Wang, Zhiguo; Xie, Wenkun

    2015-12-01

    Large-scale molecular dynamics simulation is performed to study the nano-cutting process of single crystal copper realized by single-point diamond cutting tool in this paper. The centro-symmetry parameter is adopted to characterize the subsurface deformed layers and the distribution and evolution of the subsurface defect structures. Three-dimensional visualization and measurement technology are used to measure the depth of the subsurface deformed layers. The influence of cutting speed, cutting depth, cutting direction, and crystallographic orientation on the depth of subsurface deformed layers is systematically investigated. The results show that a lot of defect structures are formed in the subsurface of workpiece during nano-cutting process, for instance, stair-rod dislocations, stacking fault tetrahedron, atomic clusters, vacancy defects, point defects. In the process of nano-cutting, the depth of subsurface deformed layers increases with the cutting distance at the beginning, then decreases at stable cutting process, and basically remains unchanged when the cutting distance reaches up to 24 nm. The depth of subsurface deformed layers decreases with the increase in cutting speed between 50 and 300 m/s. The depth of subsurface deformed layer increases with cutting depth, proportionally, and basically remains unchanged when the cutting depth reaches over 6 nm.

  6. Cutting and sharpening carbon nanotubes using a carbon nanotube 'nanoknife'

    NASA Astrophysics Data System (ADS)

    Wei, Xian Long; Chen, Qing; Liu, Yang; Mao Peng, Lian

    2007-05-01

    A new method has been developed to precisely cut and to sharpen carbon nanotubes using a 'nanoknife', which is a short carbon nanotube adhered to a metal tip. The mechanism for the cutting and the sharpening was proposed to be local vaporization of carbon caused by Joule heating. The 'nanoknife' was also found useful to cut other nanotubes and nanowires. The cutting process was also found useful to construct complex carbon nanotube structures.

  7. 21 CFR 882.4190 - Clip forming/cutting instrument.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Clip forming/cutting instrument. 882.4190 Section... (CONTINUED) MEDICAL DEVICES NEUROLOGICAL DEVICES Neurological Surgical Devices § 882.4190 Clip forming/cutting instrument. (a) Identification. A clip forming/cutting instrument is a device used by...

  8. INTERIOR VIEW SHOWING PROTOTYPE BEGUN APRIL 1988 METHOD OF CUTTING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    INTERIOR VIEW SHOWING PROTOTYPE BEGUN APRIL 1988 METHOD OF CUTTING GLASS, "PERFECT TIN? MACHINE." MANUFACTURED IN DALLAS, TEXAS AND USED FOR CUTTING GLASS WITH A FINISHED EDGE. - Chambers-McKee Window Glass Company, Cutting House, Clay Avenue Extension, Jeannette, Westmoreland County, PA

  9. Modified soldering iron speeds cutting of synthetic materials

    NASA Technical Reports Server (NTRS)

    Schafer, W. G., Jr.

    1966-01-01

    Modified soldering iron cuts large lots of synthetic materials economically without leaving frayed or jagged edges. The soldering iron is modified by machining an axial slot in its heating element tip and mounting a cutting disk in it. An alternate design has an axially threaded bore in the tip to permit the use of various shapes of cutting blades.

  10. 49 CFR 229.93 - Safety cut-off device.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Safety cut-off device. 229.93 Section 229.93 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION... Equipment § 229.93 Safety cut-off device. The fuel line shall have a safety cut-off device that— (a)...

  11. Inheritance of fresh-cut fruit quality attributes in Capsicum

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The fresh-cut fruit and vegetable industry has expanded rapidly during the past decade, due to freshness, convenience and the high nutrition that fresh-cut produce offers to consumers. The current report evaluates the inheritance of postharvest attributes that contribute to pepper fresh-cut product...

  12. Detail, squared cut stone masonry center pier, from northwest, showing ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Detail, squared cut stone masonry center pier, from northwest, showing original cut stone masonry, concrete-encased nose on upstream end, portion of squared cut stone masonry south abutment, and portion of truss superstructure - Castle Garden Bridge, Township Route 343 over Bennetts Branch of Sinnemahoning Creek, Driftwood, Cameron County, PA

  13. 49 CFR 234.269 - Cut-out circuits.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Cut-out circuits. 234.269 Section 234.269..., Inspection, and Testing Inspections and Tests § 234.269 Cut-out circuits. Each cut-out circuit shall be tested at least once every three months to determine that the circuit functions as intended. For...

  14. 49 CFR 234.269 - Cut-out circuits.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 4 2012-10-01 2012-10-01 false Cut-out circuits. 234.269 Section 234.269... circuits. Each cut-out circuit shall be tested at least once every three months to determine that the circuit functions as intended. For purposes of this section, a cut-out circuit is any circuit...

  15. 49 CFR 234.269 - Cut-out circuits.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 4 2014-10-01 2014-10-01 false Cut-out circuits. 234.269 Section 234.269... circuits. Each cut-out circuit shall be tested at least once every three months to determine that the circuit functions as intended. For purposes of this section, a cut-out circuit is any circuit...

  16. 36 CFR 223.14 - Where timber may be cut.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 36 Parks, Forests, and Public Property 2 2011-07-01 2011-07-01 false Where timber may be cut. 223... AND DISPOSAL OF NATIONAL FOREST SYSTEM TIMBER, SPECIAL FOREST PRODUCTS, AND FOREST BOTANICAL PRODUCTS General Provisions § 223.14 Where timber may be cut. (a) The cutting of trees, portions of trees or...

  17. 21 CFR 872.4120 - Bone cutting instrument and accessories.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Bone cutting instrument and accessories. 872.4120... (CONTINUED) MEDICAL DEVICES DENTAL DEVICES Surgical Devices § 872.4120 Bone cutting instrument and accessories. (a) Identification. A bone cutting instrument and accessories is a metal device intended for...

  18. 21 CFR 872.4120 - Bone cutting instrument and accessories.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Bone cutting instrument and accessories. 872.4120... (CONTINUED) MEDICAL DEVICES DENTAL DEVICES Surgical Devices § 872.4120 Bone cutting instrument and accessories. (a) Identification. A bone cutting instrument and accessories is a metal device intended for...

  19. 21 CFR 872.4120 - Bone cutting instrument and accessories.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Bone cutting instrument and accessories. 872.4120... (CONTINUED) MEDICAL DEVICES DENTAL DEVICES Surgical Devices § 872.4120 Bone cutting instrument and accessories. (a) Identification. A bone cutting instrument and accessories is a metal device intended for...

  20. 21 CFR 872.4120 - Bone cutting instrument and accessories.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Bone cutting instrument and accessories. 872.4120... (CONTINUED) MEDICAL DEVICES DENTAL DEVICES Surgical Devices § 872.4120 Bone cutting instrument and accessories. (a) Identification. A bone cutting instrument and accessories is a metal device intended for...

  1. 21 CFR 872.4120 - Bone cutting instrument and accessories.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Bone cutting instrument and accessories. 872.4120... (CONTINUED) MEDICAL DEVICES DENTAL DEVICES Surgical Devices § 872.4120 Bone cutting instrument and accessories. (a) Identification. A bone cutting instrument and accessories is a metal device intended for...

  2. 21 CFR 882.4190 - Clip forming/cutting instrument.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Clip forming/cutting instrument. 882.4190 Section 882.4190 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES.../cutting instrument. (a) Identification. A clip forming/cutting instrument is a device used by...

  3. 49 CFR 213.122 - Torch cut rail.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 4 2011-10-01 2011-10-01 false Torch cut rail. 213.122 Section 213.122..., DEPARTMENT OF TRANSPORTATION TRACK SAFETY STANDARDS Track Structure § 213.122 Torch cut rail. (a) Except as a temporary repair in emergency situations no rail having a torch cut end shall be used in Classes 3 through...

  4. 49 CFR 213.122 - Torch cut rail.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Torch cut rail. 213.122 Section 213.122..., DEPARTMENT OF TRANSPORTATION TRACK SAFETY STANDARDS Track Structure § 213.122 Torch cut rail. (a) Except as a temporary repair in emergency situations no rail having a torch cut end shall be used in Classes 3 through...

  5. 49 CFR 213.122 - Torch cut rail.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 4 2013-10-01 2013-10-01 false Torch cut rail. 213.122 Section 213.122..., DEPARTMENT OF TRANSPORTATION TRACK SAFETY STANDARDS Track Structure § 213.122 Torch cut rail. (a) Except as a temporary repair in emergency situations no rail having a torch cut end shall be used in Classes 3 through...

  6. 49 CFR 213.122 - Torch cut rail.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 4 2014-10-01 2014-10-01 false Torch cut rail. 213.122 Section 213.122..., DEPARTMENT OF TRANSPORTATION TRACK SAFETY STANDARDS Track Structure § 213.122 Torch cut rail. (a) Except as a temporary repair in emergency situations no rail having a torch cut end shall be used in Classes 3 through...

  7. 49 CFR 213.122 - Torch cut rail.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 4 2012-10-01 2012-10-01 false Torch cut rail. 213.122 Section 213.122..., DEPARTMENT OF TRANSPORTATION TRACK SAFETY STANDARDS Track Structure § 213.122 Torch cut rail. (a) Except as a temporary repair in emergency situations no rail having a torch cut end shall be used in Classes 3 through...

  8. Delving Deeper: One Cut, Two Halves, Three Questions

    ERIC Educational Resources Information Center

    Ren, Guanshen

    2009-01-01

    A square can be divided into two equal parts with any cut through the center. The first question that arises is, Would any cut through the center of a regular polygon divide it into two equal parts? If not, the second question is, What kind of lines through the center of the polygon would cut it into two halves? However, many objects are not…

  9. 29 CFR 1910.254 - Arc welding and cutting.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 29 Labor 5 2012-07-01 2012-07-01 false Arc welding and cutting. 1910.254 Section 1910.254 Labor... OCCUPATIONAL SAFETY AND HEALTH STANDARDS Welding, Cutting and Brazing § 1910.254 Arc welding and cutting. (a) General—(1) Equipment selection. Welding equipment shall be chosen for safe application to the work to...

  10. 29 CFR 1915.55 - Gas welding and cutting.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 29 Labor 7 2011-07-01 2011-07-01 false Gas welding and cutting. 1915.55 Section 1915.55 Labor... (CONTINUED) OCCUPATIONAL SAFETY AND HEALTH STANDARDS FOR SHIPYARD EMPLOYMENT Welding, Cutting and Heating § 1915.55 Gas welding and cutting. The provisions of this section shall apply to ship...

  11. 29 CFR 1910.254 - Arc welding and cutting.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 29 Labor 5 2010-07-01 2010-07-01 false Arc welding and cutting. 1910.254 Section 1910.254 Labor... OCCUPATIONAL SAFETY AND HEALTH STANDARDS Welding, Cutting and Brazing § 1910.254 Arc welding and cutting. (a) General—(1) Equipment selection. Welding equipment shall be chosen for safe application to the work to...

  12. 29 CFR 1910.254 - Arc welding and cutting.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 29 Labor 5 2011-07-01 2011-07-01 false Arc welding and cutting. 1910.254 Section 1910.254 Labor... OCCUPATIONAL SAFETY AND HEALTH STANDARDS Welding, Cutting and Brazing § 1910.254 Arc welding and cutting. (a) General—(1) Equipment selection. Welding equipment shall be chosen for safe application to the work to...

  13. 29 CFR 1910.254 - Arc welding and cutting.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 29 Labor 5 2014-07-01 2014-07-01 false Arc welding and cutting. 1910.254 Section 1910.254 Labor... OCCUPATIONAL SAFETY AND HEALTH STANDARDS Welding, Cutting and Brazing § 1910.254 Arc welding and cutting. (a) General—(1) Equipment selection. Welding equipment shall be chosen for safe application to the work to...

  14. 29 CFR 1910.254 - Arc welding and cutting.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 29 Labor 5 2013-07-01 2013-07-01 false Arc welding and cutting. 1910.254 Section 1910.254 Labor... OCCUPATIONAL SAFETY AND HEALTH STANDARDS Welding, Cutting and Brazing § 1910.254 Arc welding and cutting. (a) General—(1) Equipment selection. Welding equipment shall be chosen for safe application to the work to...

  15. The Many Lives of the Cut-Up Sentence.

    ERIC Educational Resources Information Center

    Lenters, Kimberly

    2003-01-01

    Notes that a strategy of cutting up printed sentences mediates the need to both keep children's work their own and develop a bank of sight words. Explains how cutting sentences apart allows students to investigate words. Proposes that using cut-up sentences provides scaffolding for those students who memorize text without focusing on it. (PM)

  16. 49 CFR 234.269 - Cut-out circuits.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 4 2011-10-01 2011-10-01 false Cut-out circuits. 234.269 Section 234.269..., Inspection, and Testing Inspections and Tests § 234.269 Cut-out circuits. Each cut-out circuit shall be tested at least once every three months to determine that the circuit functions as intended. For...

  17. Characterisation of debris from laser and mechanical cutting of bone.

    PubMed

    Rachmanis, Nikolaos; McGuinness, Garrett B; McGeough, Joseph A

    2014-07-01

    Laser cutting of bones has been proposed as a technology in orthopaedic surgery. In this short study, the laser-bone interaction was examined using a pulsed erbium-doped yttrium aluminium garnet laser and compared to a conventional cutting technique. Microscopic analysis revealed the nature of waste debris and showed higher proportions of finer particles for conventional sagittal sawing compared to laser cutting.

  18. Hollow needle used to cut metal honeycomb structures

    NASA Technical Reports Server (NTRS)

    Gregg, E. A.

    1966-01-01

    Hollow needle tool cuts metal honeycomb structures without damaging adjacent material. The hollow needle combines an electrostatic discharge and a stream of oxygen at a common point to effect rapid, accurate metal cutting. The tool design can be varied to use the hollow needle principle for cutting a variety of shapes.

  19. Study on optimal surface property of WC-Co cutting tool for aluminium alloy cutting

    NASA Astrophysics Data System (ADS)

    Nizar, Mohd; Arimatsu, Naoya; Kawamitsu, Hiroshi; Takai, Kazuteru; Fukumoto, Masahiro

    2016-02-01

    The light weight property as well as high corrosion resistance of aluminium alloy has increased their demand especially in automobile industries. Aluminium alloy as a matter of fact has a low melting point and high ductility that severely adhere to the cutting tool surface and cause deterioration of chip evacuation. This problem often resulting in tools breakage. In this paper, in order to impart functions of anti-adhesion, we propose a technique by controlling the grinding marks micro texture on the tool surface by using the blast polishing treatment without any coating technologies. The results show that the tool which underwent polishing treatment reduces the cutting force as well as the aluminium adherence during the initial cutting process, and become worst as the process cutting continues. These results indicate that grinding mark texture improves the anti-adhesion by reducing the contact area during cutting and provide storage for the lubricant. In addition, too much polishing on the tool surface may remove these textures and resultantly worsen the tool performance.

  20. High-speed laser cutting of thin metal sheets

    NASA Astrophysics Data System (ADS)

    Preissig, Kai-Uwe; Petring, Dirk; Herziger, Gerd

    1994-09-01

    Increasing productivity in splitting up of metal sheets by means of mechanical cutting processes is today limited by long change-over times as well as nonproductive times and insufficient quality caused by tool wear. In the case of high-quality materials even a slight quality reduction concerning development of dross attachment and induced stress leads to a lot of rejects. In order to increase the cutting speeds within a range economical for industrial use, i.e. about 100 m/min, a completely new type of laser cutting process had to be developed. As opposed to conventional laser cutting, during which a semicylindric cutting front is formed, a closed keyhole with subsequent melt film ejection is produced during the completely new laser cutting process. The incoupling of energy no longer only results from pure surface absorption but in addition from plasma formation and multiple reflection. With the help of the wear resisting tool `laser' the cutting quality is constantly good and can even be significantly improved in comparison with the conventional cutting method with circular knifes. In the case of a sheet thickness of 0.2 mm grain oriented electrical steel can be cut e.g. with a cutting speed of 130 m/min, aluminum with 270 m/min, copper with 95 m/min and zinc with 280 m/min; the necessary laser power is 1300 W. Based on the results of basic research the prototype of a laser slitting line was constructed and went into operation in autumn 1991. Up to now various materials for different customers have been cut on this slitting line and used in industry. Especially when cutting grain oriented electrical steel, which is a material with very high requirements on the cutting process, it becomes evident that the laser cutting process compared with the conventional technique has considerable advantages concerning cutting quality and quality assurance.

  1. Effect of cutting parameters on the chip formation in orthogonal cutting

    NASA Astrophysics Data System (ADS)

    M'hamdi, M.; BenSalem, S.; Boujelbene, M.; Katundi, D.; Bayraktar, E.

    2011-01-01

    This paper aims to study the chip formation to obtain the optimal cutting conditions by observing the different chip formation mechanisms. Analysis of machining of a hardened alloy, X160CrMoV12-1 (cold work steel: AISI D2 with a ferritic and cementite matrix and coarse primary carbides), showed that there are relationships between the chip geometry, cutting conditions and the different micrographs under different metallurgical states. For the experimental study here, various cutting speeds and feed rates have been applied on the work material. The "saw-tooth type chips" geometry has been examined and the chip samples were metallographically processed and observed under scanning electronic microscope (SEM) to determine if white layers are present.

  2. Bilingual Skills Training Program. Meat Cutting. Module 3.0: Identifying and Cutting Meat and By-Products.

    ERIC Educational Resources Information Center

    Northern New Mexico Community Coll., El Rito.

    This module on identifying and cutting of meat and by-products is the third of three (CE 028 291-293) in the meat cutting course of a bilingual skills training program. The course is designed to furnish theoretical and laboratory experience in the cutting of beef, pork, poultry, lamb, and mutton. Module objectives are for students to develop…

  3. Cutting Edge Geometry Effect on Plastic Deformation of Titanium Alloy

    NASA Astrophysics Data System (ADS)

    Korovin, G. I.; Filippov, A. V.; Proskokov, A. V.; Gorbatenko, V. V.

    2016-04-01

    The paper presents experimental studies of OT4 titanium alloy machining with cutting edges of various geometry parameters. Experiments were performed at a low speed by the scheme of free cutting. Intensity of plastic shear strain was set for defining of cutting edge geometry effect on machining. Images of chip formed are shown. Estimation of strain magnitude was accomplished with digital image correlation method. Effect of rake angle and cutting edge angle has been studied. Depth of deformed layer and the area of the plastic strain is determine. Results showed that increasing the angle of the cutting edge inclination results in a change the mechanism of chip formation.

  4. High pressure water jet cutting and stripping

    NASA Technical Reports Server (NTRS)

    Hoppe, David T.; Babai, Majid K.

    1991-01-01

    High pressure water cutting techniques have a wide range of applications to the American space effort. Hydroblasting techniques are commonly used during the refurbishment of the reusable solid rocket motors. The process can be controlled to strip a thermal protective ablator without incurring any damage to the painted surface underneath by using a variation of possible parameters. Hydroblasting is a technique which is easily automated. Automation removes personnel from the hostile environment of the high pressure water. Computer controlled robots can perform the same task in a fraction of the time that would be required by manual operation.

  5. Cut bullwork in hv-insulator installation

    SciTech Connect

    Not Available

    1980-01-01

    With an insulation and strength capability as good as or better than porcelain-at one-tenth the weight-insulators made of an assembly of copolymer weathersheds on an epoxy-fiberglass center rod are proving to be an effective option in high-voltage line construction. Experience has shown that the high-strength-to-weight, factory-assembled insulators can cut line-construction costs. These Hi-Lite insulators, are also helping to meet many line design and upgrading requirements that might be difficult or prohibitively expensive using traditional insulation systems.

  6. Ribbon cutting opens new ELV offices

    NASA Technical Reports Server (NTRS)

    2000-01-01

    The audience applauds and enjoys the official opening of the E&O Building as the new site of the Expendable Launch Vehicle Program. Home for NASA's unmanned missions since 1964, the building has been renovated to house the ELV Program. Cutting the ribbon for the event were Deputy Manager of the ELV and Payload Carrier Programs, Steve Francois; Director of ELV Launch Services, Michael Benik; Center Director Roy Bridges; Manager of the ELV and Payload Carrier Programs, Bobby Bruckner; and Senior Manager of the Boeing ELV Program Support office, Jim Schofield.

  7. Cross Cutting Structural Design for Exploration Systems

    NASA Technical Reports Server (NTRS)

    Semmes, Edmund B.

    2007-01-01

    The challenge of our new National Space Policy and NASA's Vision for Space Exploration (VSE) is keyed to the development of more effective space access and transportation systems. Optimizing in-space systems through innovative cross cutting structural designs that reduce mass, combine functional requirements and improve performance can significantly advance spacecraft designs to meet the ever growing demands of our new National Space Policy. Dependence on limited structural designs is no longer an option. We must create robust materials, forms, function and evolvable systems. We must advance national policy objectives in the design, development, test and operation of multi-billion dollar new generation crew capsules by enabling them to evolve in meeting the requirements of long duration missions to the moon and mars. This paper discusses several current issues and major design drivers for consideration in structural design of advanced spacecraft systems. Approaches to addressing these multifunctional requirements is presented as well as a discussion on utilizing Functional Analysis System Technique (FAST) in developing cross cutting structural designs for future spacecraft. It will be shown how easy it is to deploy such techniques in any conceptual architecture definition or ongoing preliminary design. As experts in merging mission, safety and life support requirements of the frail human existence into robust vehicle and habitat design, we will conquer the final frontier, harness new resources and develop life giving technologies for mankind through more innovative designs. The rocket equation tells us that a reduction in mass optimizes our propulsive results. Primary and secondary structural elements provide for the containment of gases, fluids and solids; translate and sustain loads/impacts; conduct/radiate thermal energy; shield from the harmful effects of radiation; provide for grounding/bonding of electrical power systems; compartmentalize operational

  8. Soft tissue cutting with ultrasonic mechanical waveguides

    NASA Astrophysics Data System (ADS)

    Wylie, Mark. P.; McGuinness, Garrett; Gavin, Graham P.

    2012-05-01

    The use of ultrasonic vibrations transmitted via small diameter wire waveguides represents a technology that has potential for minimally invasive procedures in surgery. This form of energy delivery results in distal tip mechanical vibrations with amplitudes of vibration of up to 50 μm and at frequencies between 20-50 kHz commonly reported. This energy can then be used by micro-cutting surgical tools and end effectors for a range of applications such as bone cutting, cement removal in joint revision surgery and soft tissue cutting. One particular application which has gained regulatory approval in recent years is in the area of cardiovascular surgery in the removal of calcified atherosclerotic plaques and chronic total occlusions. This paper builds on previous work that was focused on the ultrasonic perforation of soft vascular tissue using ultrasonically activated mechanical waveguides and the applied force required to initiate failure in soft tissue when compared with non-ultrasonic waveguides. An ultrasonic device and experimental rig was developed that can deliver ultrasonic vibrations to the distal tip of 1.0 mm diameter nickel-titanium waveguides. The operation of the ultrasonic device has been characterized at 22.5 kHz with achievable amplitudes of vibration in the range of 16 - 40μm. The experimental rig allows the ultrasonically activated waveguide to be advanced through a tissue sample over a range of feedrates and the waveguide-tissue interaction force can be measured during perforation into the tissue. Preliminary studies into the effects of feedrate on porcine aortic arterial tissue perforation forces are presented as part of this work. A range of amplitudes of vibration at the wire waveguide distal tip were examined. The resulting temperature increase when perforating artery wall when using the energized wire waveguides is also examined. Results show a clear multistage failure of the tissue. The first stage involves a rise in force up to some

  9. Augmented Endoscopic Images Overlaying Shape Changes in Bone Cutting Procedures

    PubMed Central

    2016-01-01

    In microendoscopic discectomy for spinal disorders, bone cutting procedures are performed in tight spaces while observing a small portion of the target structures. Although optical tracking systems are able to measure the tip of the surgical tool during surgery, the poor shape information available during surgery makes accurate cutting difficult, even if preoperative computed tomography and magnetic resonance images are used for reference. Shape estimation and visualization of the target structures are essential for accurate cutting. However, time-varying shape changes during cutting procedures are still challenging issues for intraoperative navigation. This paper introduces a concept of endoscopic image augmentation that overlays shape changes to support bone cutting procedures. This framework handles the history of the location of the measured drill tip as a volume label and visualizes the remains to be cut overlaid on the endoscopic image in real time. A cutting experiment was performed with volunteers, and the feasibility of this concept was examined using a clinical navigation system. The efficacy of the cutting aid was evaluated with respect to the shape similarity, total moved distance of a cutting tool, and required cutting time. The results of the experiments showed that cutting performance was significantly improved by the proposed framework. PMID:27584732

  10. Augmented Endoscopic Images Overlaying Shape Changes in Bone Cutting Procedures.

    PubMed

    Nakao, Megumi; Endo, Shota; Nakao, Shinichi; Yoshida, Munehito; Matsuda, Tetsuya

    2016-01-01

    In microendoscopic discectomy for spinal disorders, bone cutting procedures are performed in tight spaces while observing a small portion of the target structures. Although optical tracking systems are able to measure the tip of the surgical tool during surgery, the poor shape information available during surgery makes accurate cutting difficult, even if preoperative computed tomography and magnetic resonance images are used for reference. Shape estimation and visualization of the target structures are essential for accurate cutting. However, time-varying shape changes during cutting procedures are still challenging issues for intraoperative navigation. This paper introduces a concept of endoscopic image augmentation that overlays shape changes to support bone cutting procedures. This framework handles the history of the location of the measured drill tip as a volume label and visualizes the remains to be cut overlaid on the endoscopic image in real time. A cutting experiment was performed with volunteers, and the feasibility of this concept was examined using a clinical navigation system. The efficacy of the cutting aid was evaluated with respect to the shape similarity, total moved distance of a cutting tool, and required cutting time. The results of the experiments showed that cutting performance was significantly improved by the proposed framework. PMID:27584732

  11. Micromachined cutting blade formed from {211}-oriented silicon

    DOEpatents

    Fleming, James G.; Sniegowski, Jeffry J.; Montague, Stephen

    2003-09-09

    A cutting blade is disclosed fabricated of micromachined silicon. The cutting blade utilizes a monocrystalline silicon substrate having a {211} crystalline orientation to form one or more cutting edges that are defined by the intersection of {211} crystalline planes of silicon with {111} crystalline planes of silicon. This results in a cutting blade which has a shallow cutting-edge angle .theta. of 19.5.degree.. The micromachined cutting blade can be formed using an anisotropic wet etching process which substantially terminates etching upon reaching the {111} crystalline planes of silicon. This allows multiple blades to be batch fabricated on a common substrate and separated for packaging and use. The micromachined cutting blade, which can be mounted to a handle in tension and optionally coated for increased wear resistance and biocompatibility, has multiple applications including eye surgery (LASIK procedure).

  12. Micromachined cutting blade formed from {211}-oriented silicon

    DOEpatents

    Fleming, James G.; Fleming, legal representative, Carol; Sniegowski, Jeffry J.; Montague, Stephen

    2011-08-09

    A cutting blade is disclosed fabricated of micromachined silicon. The cutting blade utilizes a monocrystalline silicon substrate having a {211} crystalline orientation to form one or more cutting edges that are defined by the intersection of {211} crystalline planes of silicon with {111} crystalline planes of silicon. This results in a cutting blade which has a shallow cutting-edge angle .theta. of 19.5.degree.. The micromachined cutting blade can be formed using an anisotropic wet etching process which substantially terminates etching upon reaching the {111} crystalline planes of silicon. This allows multiple blades to be batch fabricated on a common substrate and separated for packaging and use. The micromachined cutting blade, which can be mounted to a handle in tension and optionally coated for increased wear resistance and biocompatibility, has multiple applications including eye surgery (LASIK procedure).

  13. DT-MRI segmentation using graph cuts

    NASA Astrophysics Data System (ADS)

    Weldeselassie, Yonas T.; Hamarneh, Ghassan

    2007-03-01

    An important problem in medical image analysis is the segmentation of anatomical regions of interest. Once regions of interest are segmented, one can extract shape, appearance, and structural features that can be analyzed for disease diagnosis or treatment evaluation. Diffusion tensor magnetic resonance imaging (DT-MRI) is a relatively new medical imaging modality that captures unique water diffusion properties and fiber orientation information of the imaged tissues. In this paper, we extend the interactive multidimensional graph cuts segmentation technique to operate on DT-MRI data by utilizing latest advances in tensor calculus and diffusion tensor dissimilarity metrics. The user interactively selects certain tensors as object ("obj") or background ("bkg") to provide hard constraints for the segmentation. Additional soft constraints incorporate information about both regional tissue diffusion as well as boundaries between tissues of different diffusion properties. Graph cuts are used to find globally optimal segmentation of the underlying 3D DT-MR image among all segmentations satisfying the constraints. We develop a graph structure from the underlying DT-MR image with the tensor voxels corresponding to the graph vertices and with graph edge weights computed using either Log-Euclidean or the J-divergence tensor dissimilarity metric. The topology of our segmentation is unrestricted and both obj and bkg segments may consist of several isolated parts. We test our method on synthetic DT data and apply it to real 2D and 3D MRI, providing segmentations of the corpus callosum in the brain and the ventricles of the heart.

  14. Tool for cutting insulation from electrical cables

    DOEpatents

    Harless, Charles E.; Taylor, Ward G.

    1978-01-01

    This invention is an efficient hand tool for precisely slitting the sheath of insulation on an electrical cable--e.g., a cable two inches in diameter--in a manner facilitating subsequent peeling or stripping of the insulation. The tool includes a rigid frame which is slidably fitted on an end section of the cable. The frame carries a rigidly affixed handle and an opposed, elongated blade-and-handle assembly. The blade-and-handle assembly is pivotally supported by a bracket which is slidably mounted on the frame for movement toward and away from the cable, thus providing an adjustment for the depth of cut. The blade-and-handle assembly is mountable to the bracket in two pivotable positions. With the assembly mounted in the first position, the tool is turned about the cable to slit the insulation circumferentially. With the assembly mounted in the second position, the tool is drawn along the cable to slit the insulation axially. When cut both circumferentially and axially, the insulation can easily be peeled from the cable.

  15. Gravitropism in cut flower stalks of snapdragon

    NASA Astrophysics Data System (ADS)

    Philosoph-Hadas, S.; Friedman, H.; Meir, S.; Berkovitz-SimanTov, R.; Rosenberger, I.; Halevy, A. H.; Kaufman, P. B.; Balk, P.; Woltering, E. J.

    The negative gravitropic response of cut flower stalks is a complex multistep process that requires the participation of various cellular components acting in succession or in parallel. The process was particularly characterized in snapdragon (Antirrhinum majus L.) spikes with regard to (1) gravity stimulus perception associated with amyloplast reorientation; (2) stimulus transduction mediated through differential changes in the level, action and related genes of auxin and ethylene and their possible interaction; (3) stimulus response associated with differential growth leading to stalk curvature; (4) involvement of cytosolic calcium and actin cytoskeleton. Results show that the gravity-induced amyloplast reorientation, differential over-expression of two early auxin responsive genes and asymmetrical distribution of free IAA are early events in the bending process. These precede the asymmetrical ethylene production and differential stem growth, which was derived from initial shrinkage of the upper stem side and a subsequent elongation of the lower stem side. Results obtained with various calcium- and cytoskeleton-related agents indicate that cytosolic calcium and actin filaments may play essential roles in gravitropism-related processes of cut flower stalks. Therefore, modulators of these two physiological mediators may serve as means for controlling any undesired gravitropic bending.

  16. Interaction of Vortex Ring with Cutting Plate

    NASA Astrophysics Data System (ADS)

    Musta, Mustafa

    2015-11-01

    The interaction of a vortex ring impinging on a thin cutting plate was made experimentally using Volumetric 3-component Velocitmetry (v3v) technique. The vortex rings were generated with piston-cylinder vortex ring generator using piston stroke-to-diameter ratios and Re at 2-3 and 1500 - 3000, respectively. The cutting of vortex rings below center line leads to the formation of secondary vortices on each side of the plate which is look like two vortex rings, and a third vortex ring propagates further downstream in the direction of the initial vortex ring, which is previously showed by flow visualization study of Weigand (1993) and called ``trifurcation''. Trifurcation is very sensitive to the initial Reynolds number and the position of the plate with respect to the vortex ring generator pipe. The present work seeks more detailed investigation on the trifurcation using V3V technique. Conditions for the formation of trifurcation is analyzed and compared with Weigand (1993). The formed secondary vortex rings and the propagation of initial vortex ring in the downstream of the plate are analyzed by calculating their circulation, energy and trajectories.

  17. Cut flowers: a potential pesticide hazard.

    PubMed

    Morse, D L; Baker, E L; Landrigan, P J

    1979-01-01

    Following reports of ten cases of possible organophosphate pesticide poisoning in florists exposed to pesticide residues on cut flowers, we conducted a prospective random-sample survey to determine residual pesticide levels on flowers imported into the United States via Miami, Florida. A sample of all flowers imported into Miami on three days in January 1977 showed that 18 (17.7 per cent) of 105 lots contained pesticide residue levels greater than 5 ppm, and that three lots had levels greater than 400 ppm. Azodrin (monocrotophos) was the most important contaminant with levels of 7.7--4,750 ppm detected in nine lots. We examined 20 quarantine workers in Miami and 12 commercial florists exposed to contaminated flowers. Occasional nonspecific symptoms compatible with possible organophosphate exposure were noted, but we found no abnormalities in plasma or red blood cell cholinesterase levels. This study documents a previously unrecognized potential source of occupational pesticide exposure and suggests that safety standards should be set for residue levels on cut flowers.

  18. Material Behavior At The Extreme Cutting Edge In Bandsawing

    SciTech Connect

    Sarwar, Mohammed; Haider, Julfikar; Persson, Martin; Hellbergh, Haakan

    2011-01-17

    In recent years, bandsawing has been widely accepted as a favourite option for metal cutting off operations where the accuracy of cut, good surface finish, low kerf loss, long tool life and high material removal rate are required. Material removal by multipoint cutting tools such as bandsaw is a complex mechanism owing to the geometry of the bandsaw tooth (e.g., limited gullet size, tooth setting etc.) and the layer of material removed or undeformed chip thickness or depth of cut (5 {mu}m-50 {mu}m) being smaller than or equal to the cutting edge radius (5 {mu}m-15 {mu}m). This situation can lead to inefficient material removal in bandsawing. Most of the research work are concentrated on the mechanics of material removal by single point cutting tool such as lathe tool. However, such efforts are very limited in multipoint cutting tools such as in bandsaw. This paper presents the fundamental understanding of the material behaviour at the extreme cutting edge of bandsaw tooth, which would help in designing and manufacturing of blades with higher cutting performance and life. ''High Speed Photography'' has been carried out to analyse the material removal process at the extreme cutting edge of bandsaw tooth. Geometric model of chip formation mechanisms based on the evidences found during ''High Speed Photography'' and ''Quick Stop'' process is presented. Wear modes and mechanism in bimetal and carbide tipped bandsaw teeth are also presented.

  19. The contour method cutting assumption: error minimization and correction

    SciTech Connect

    Prime, Michael B; Kastengren, Alan L

    2010-01-01

    The recently developed contour method can measure 2-D, cross-sectional residual-stress map. A part is cut in two using a precise and low-stress cutting technique such as electric discharge machining. The contours of the new surfaces created by the cut, which will not be flat if residual stresses are relaxed by the cutting, are then measured and used to calculate the original residual stresses. The precise nature of the assumption about the cut is presented theoretically and is evaluated experimentally. Simply assuming a flat cut is overly restrictive and misleading. The critical assumption is that the width of the cut, when measured in the original, undeformed configuration of the body is constant. Stresses at the cut tip during cutting cause the material to deform, which causes errors. The effect of such cutting errors on the measured stresses is presented. The important parameters are quantified. Experimental procedures for minimizing these errors are presented. An iterative finite element procedure to correct for the errors is also presented. The correction procedure is demonstrated on experimental data from a steel beam that was plastically bent to put in a known profile of residual stresses.

  20. Cutting effectiveness of diamond instruments subjected to cyclic sterilization methods.

    PubMed

    Gureckis, K M; Burgess, J O; Schwartz, R S

    1991-12-01

    The effect of repeated sterilization on the cutting effectiveness of one brand of rotary dental diamond cutting instruments was measured. Four groups of five diamond burs were sterilized by four methods: (1) sterilization with a chemical agent (Sporicidin); (2) steam under pressure (autoclave); (3) dry heat (Dri-Clave); or (4) chemical vapor (Chemiclave). Each group of diamond instruments made a timed cut in a ceramic block. This cut and all subsequent cuts were measured and were used to determine a baseline cutting effectiveness. Each group of diamond burs was then ultrasonically cleaned, sterilized, and another cut was made. At the end of 10 cycles there was no difference in cutting efficiency of the dental diamond instruments. However, there are differences in the cutting efficiency of individual diamond instruments. The SEM evaluation made prior to cutting and at the end of the 10 cycles of sterilization demonstrated that diamond wear was similar in all groups and that little diamond particle loss occurred in any group. PMID:1666657

  1. Proposed NASA budget cuts planetary science

    NASA Astrophysics Data System (ADS)

    Balcerak, Ernie

    2012-02-01

    President Barack Obama's fiscal year (FY) 2013 budget request for NASA would sharply cut planetary science while maintaining other science and exploration priorities. The total proposed FY 2013 budget for NASA is $17.7 billion, a slight decrease (0.33%) from the previous year (see Table 1). This includes $4.9 billion for the Science directorate, a decrease of about 3.2% from the previous year, and about $3.9 billion for the Human Exploration directorate, a n increase of about $200 million over FY 2012. The latter would include about $2.8 million for development of a new heavy-lift rocket system, known as the Space Launch System (SLS), to take humans beyond low-Earth orbit, along with the Orion crew vehicle.

  2. Microwave-cut silicon layer transfer

    SciTech Connect

    Thompson, D.C.; Alford, T.L.; Mayer, J.W.; Hochbauer, T.; Nastasi, M.; Lau, S.S.; Theodore, N. David; Henttinen, K.; Suni, Ilkka; Chu, Paul K.

    2005-11-28

    Microwave heating is used to initiate exfoliation of silicon layers in conjunction with the ion-cut process for transfer of silicon layers onto insulator or heterogeneous layered substrates. Samples were processed inside a 2.45 GHz, 1300 W cavity applicator microwave system for time durations as low as 12 s. This is a significant decrease in exfoliation incubation times. Sample temperatures measured by pyrometry were within previous published ranges. Rutherford backscattering spectrometry and cross-sectional transmission electron microscopy were used to determine layer thickness and crystallinity. Surface quality was measured by using atomic force microscopy. Hall measurements were used to characterize electrical properties as a function of postcut anneal time and temperature.

  3. Oil glut forcing NE gas rate cuts

    SciTech Connect

    Cohn, L.

    1982-03-15

    Industrial users with dual-fuel capability may soon find natural gas cheaper as gas utilities try to adjust their rates in anticipation of cuts in surplus No. 6 oil. The price advantage of gas over oil has dropped from about $3 per million Btu to about $1 per million Btu on a national average, and the gap has closed in some areas of New England. Natural-gas utilities are applying to state regulators for rate relief in order to remain competitive. Gas companies already offer interruptible rates to customers who agree to switch to their alternative fuel upon request. They are now looking to year-long contract with limited interruption and other rate schemes. A table presents DOE industrial price projections by region for six fuels for 1979, 1985, 1990, and 1995. (DCK)

  4. SOT project cut from NASA Budget

    NASA Astrophysics Data System (ADS)

    Katzoff, Judith A.

    About a decade ago, the solar physics community decided that its next major project should be the building of a Solar Optical Telescope (SOT) that would be flown on the space shuttle as a Spacelab payload. The National Aeronautics and Space Administration (NASA) deemed the project “facility class instrumentation,” issued an announcement of opportunity, chose investigators, contractors, and a science working group, and began funding SOT planning efforts. After what one source involved with the project called “a long and lusty history,” SOT was cut out of the agency's budget request for fiscal year (FY) 1987, released last month (Eos, February 25, 1986, p. 95). The project may be revived, planners say, but in a scaled-down, renamed form.

  5. Double-copy constructions and unitarity cuts

    NASA Astrophysics Data System (ADS)

    Bern, Zvi; Davies, Scott; Nohle, Josh

    2016-05-01

    The duality between color and kinematics enables the construction of multiloop gravity integrands directly from corresponding gauge-theory integrands. This has led to new nontrivial insights into the structure of gravity theories, including the discovery of enhanced ultraviolet cancellations. To continue to gain deeper understandings and probe these new properties, it is crucial to further improve techniques for constructing multiloop gravity integrands. In this paper, we show by example how one can alleviate difficulties encountered at the multiloop level by relaxing the color-kinematics duality conditions to hold manifestly only on unitarity cuts instead of globally on loop integrands. As an example, we use a minimal Ansatz to construct an integrand for the two-loop four-point nonsupersymmetric pure Yang-Mills amplitude in D dimensions that is compatible with these relaxed color-kinematics duality constraints. We then immediately obtain a corresponding gravity integrand through the double-copy procedure. Comments on ultraviolet divergences are also included.

  6. Efficient graph-cut tattoo segmentation

    NASA Astrophysics Data System (ADS)

    Kim, Joonsoo; Parra, Albert; Li, He; Delp, Edward J.

    2015-03-01

    Law enforcement is interested in exploiting tattoos as an information source to identify, track and prevent gang-related crimes. Many tattoo image retrieval systems have been described. In a retrieval system tattoo segmentation is an important step for retrieval accuracy since segmentation removes background information in a tattoo image. Existing segmentation methods do not extract the tattoo very well when the background includes textures and color similar to skin tones. In this paper we describe a tattoo segmentation approach by determining skin pixels in regions near the tattoo. In these regions graph-cut segmentation using a skin color model and a visual saliency map is used to find skin pixels. After segmentation we determine which set of skin pixels are connected with each other that form a closed contour including a tattoo. The regions surrounded by the closed contours are considered tattoo regions. Our method segments tattoos well when the background includes textures and color similar to skin.

  7. Measuring lateral shuffle and side cut performance.

    PubMed

    Whitting, John W; de Melker Worms, Jonathan L A; Maurer, Christian; Nigg, Sandro R; Nigg, Benno M

    2013-11-01

    Lateral shuffle and side cut (SSC) movements are defensive basketball movements where movement speed is critical to performance. The purpose of this study was to compare SSC data obtained using timing lights with motion capture system data and to determine the most appropriate method for measuring SSC performance. Shuffle time data were recorded using both timing lights and a motion capture system while 9 male subjects performed 2 different SSC movement sets, with and without controlling for arm movements, which may influence performance times. Shuffle and side cut times and SSC displacements were used to calculate mean shuffle velocity for each trial. The SEs for the motion capture system were estimated for SSC times (± 4.2 milliseconds; ~0.24% of mean shuffle time) and velocities (± 5.5 mm · s; ~0.24% of mean shuffle velocity), respectively, indicating high levels of precision. Timing light movement time variability was significantly higher during the uncontrolled (SD = 42 milliseconds) when compared with the controlled (SD = 9 milliseconds, p < 0.001) condition, indicating a significant reduction in variability by controlling non-performance-related variability such as arm movement. A significant positive correlation was found between SSC time and SSC displacement (r = 0.42) indicating that performance times were dependent on displacement. Furthermore, the variance in motion-captured SSC velocity was significantly smaller than the variance in velocity determined using timing lights (p < 0.05). We concluded that motion-captured SSC velocity data reduced systematic errors and non-performance-related movement variability and, therefore, was better able to reflect true performance. As true performance variability in human movement provides important information, the presented method for calculating SSC velocity in this study is recommended for assessing SSC performance.

  8. Genetic Evolutionary Approach for Cutting Forces Prediction in Hard Milling

    NASA Astrophysics Data System (ADS)

    Taylan, Fatih; Kayacan, Cengiz

    2011-11-01

    Hard milling is a very common used machining procedure in the last years. Therefore the prediction of cutting forces is important. The paper deals with this prediction using genetic evolutionary programming (GEP) approach to set mathematical expression for out cutting forces. In this study, face milling was performed using DIN1.2842 (90MnCrV8) cold work tool steel, with a hardness of 61 HRC. Experimental parameters were selected using stability measurements and simulations. In the hard milling experiments, cutting force data in a total of three axes were collected. Feed direction (Fx) and tangential direction (Fy) cutting forces generated using genetic evolutionary programming were modelled. Cutting speed and feed rate values were treated as inputs in the models, and average cutting force values as output. Mathematical expressions were created to predict average Fxand Fy forces that can be generated in hard material milling.

  9. Gear-Cutting Tool for Screw-Compressor Rotors

    NASA Astrophysics Data System (ADS)

    Kaneko, Katsumi; Kawasaki, Kazumasa; Tamura, Hisashi

    A built-up hob for a screw-compressor rotor is proposed. The hob is composed of cutter blades and a hob head. The blade is cut out from a tempered planar plate of high speed tool steel by wire-cut electrodischarge machining (EDM). During the wire cutting process, the wire electrode has a fixed angle to ensure both the side and the end relief angle of the cutting edge, so that the rake face regrinding sharpens the cutting edge without changing the profile of the rake face. In other words, theoretically, the hob has no accuracy deterioration due to rake face regrinding. The formulae of rack tooth profile are derived from the female rotor tooth profile experssed by numerical formulae. Next, the fundamental helicoid of the hob the profile of the cutting edge of the blade are calculated. The hob was fabricated and the rotor hobbing was carried out.

  10. The effect of cutting conditions on power inputs when machining

    NASA Astrophysics Data System (ADS)

    Petrushin, S. I.; Gruby, S. V.; Nosirsoda, Sh C.

    2016-08-01

    Any technological process involving modification of material properties or product form necessitates consumption of a certain power amount. When developing new technologies one should take into account the benefits of their implementation vs. arising power inputs. It is revealed that procedures of edge cutting machining are the most energy-efficient amongst the present day forming procedures such as physical and technical methods including electrochemical, electroerosion, ultrasound, and laser processing, rapid prototyping technologies etc, such as physical and technical methods including electrochemical, electroerosion, ultrasound, and laser processing, rapid prototyping technologies etc. An expanded formula for calculation of power inputs is deduced, which takes into consideration the mode of cutting together with the tip radius, the form of the replaceable multifaceted insert and its wear. Having taken as an example cutting of graphite iron by the assembled cutting tools with replaceable multifaceted inserts the authors point at better power efficiency of high feeding cutting in comparison with high-speed cutting.

  11. Generalized interactions using virtual tools within the spring framework: cutting

    NASA Technical Reports Server (NTRS)

    Montgomery, Kevin; Bruyns, Cynthia D.

    2002-01-01

    We present schemes for real-time generalized mesh cutting. Starting with the a basic example, we describe the details of implementing cutting on single and multiple surface objects as well as hybrid and volumetric meshes using virtual tools with single and multiple cutting surfaces. These methods have been implemented in a robust surgical simulation environment allowing us to model procedures ranging from animal dissection to cleft lip correction.

  12. High power laser downhole cutting tools and systems

    SciTech Connect

    Zediker, Mark S; Rinzler, Charles C; Faircloth, Brian O; Koblick, Yeshaya; Moxley, Joel F

    2015-01-20

    Downhole cutting systems, devices and methods for utilizing 10 kW or more laser energy transmitted deep into the earth with the suppression of associated nonlinear phenomena. Systems and devices for the laser cutting operations within a borehole in the earth. These systems and devices can deliver high power laser energy down a deep borehole, while maintaining the high power to perform cutting operations in such boreholes deep within the earth.

  13. Adiabatic shear mechanisms for the hard cutting process

    NASA Astrophysics Data System (ADS)

    Yue, Caixu; Wang, Bo; Liu, Xianli; Feng, Huize; Cai, Chunbin

    2015-05-01

    The most important consequence of adiabatic shear phenomenon is formation of sawtooth chip. Lots of scholars focused on the formation mechanism of sawtooth, and the research often depended on experimental approach. For the present, the mechanism of sawtooth chip formation still remains some ambiguous aspects. This study develops a combined numerical and experimental approach to get deeper understanding of sawtooth chip formation mechanism for Polycrystalline Cubic Boron Nitride (PCBN) tools orthogonal cutting hard steel GCr15. By adopting the Johnson-Cook material constitutive equations, the FEM simulation model established in this research effectively overcomes serious element distortions and cell singularity in high strain domain caused by large material deformation, and the adiabatic shear phenomenon is simulated successfully. Both the formation mechanism and process of sawtooth are simulated. Also, the change features regarding the cutting force as well as its effects on temperature are studied. More specifically, the contact of sawtooth formation frequency with cutting force fluctuation frequency is established. The cutting force and effect of cutting temperature on mechanism of adiabatic shear are investigated. Furthermore, the effects of the cutting condition on sawtooth chip formation are researched. The researching results show that cutting feed has the most important effect on sawtooth chip formation compared with cutting depth and speed. This research contributes a better understanding of mechanism, feature of chip formation in hard turning process, and supplies theoretical basis for the optimization of hard cutting process parameters.

  14. Factors affecting quality and safety of fresh-cut produce.

    PubMed

    Francis, G A; Gallone, A; Nychas, G J; Sofos, J N; Colelli, G; Amodio, M L; Spano, G

    2012-01-01

    The quality of fresh-cut fruit and vegetable products includes a combination of attributes, such as appearance, texture, and flavor, as well as nutritional and safety aspects that determine their value to the consumer. Nutritionally, fruit and vegetables represent a good source of vitamins, minerals, and dietary fiber, and fresh-cut produce satisfies consumer demand for freshly prepared, convenient, healthy food. However, fresh-cut produce deteriorates faster than corresponding intact produce, as a result of damage caused by minimal processing, which accelerates many physiological changes that lead to a reduction in produce quality and shelf-life. The symptoms of produce deterioration include discoloration, increased oxidative browning at cut surfaces, flaccidity as a result of loss of water, and decreased nutritional value. Damaged plant tissues also represent a better substrate for growth of microorganisms, including spoilage microorganisms and foodborne pathogens. The risk of pathogen contamination and growth is one of the main safety concerns associated with fresh-cut produce, as highlighted by the increasing number of produce-linked foodborne outbreaks in recent years. The pathogens of major concern in fresh-cut produce are Listeria monocytogenes, pathogenic Escherichia coli mainly O157:H7, and Salmonella spp. This article describes the quality of fresh-cut produce, factors affecting quality, and various techniques for evaluating quality. In addition, the microbiological safety of fresh-cut produce and factors affecting pathogen survival and growth on fresh-cut produce are discussed in detail.

  15. Apparatus and method for cutting soft materials, especially meat

    DOEpatents

    Spletzer, Barry L.; Callow, Diane S.; Jones, James F.; Kuehl, Michael A.; Shaw, Dick L.; Scalia, Barbara J.

    2005-10-18

    An apparatus and method for cutting soft materials such as meat. Two or more spirally mounted helical blades are situated between two supports, and the supports are mounted to a shank. The shank is rotated to impart rotary action to the spiral shear blades, and the entire device may be used to perform various cutting operations. The distal or bottom one of the supports may also be a cutting blade, and a number of versions of bottom cutting blades are useable in the practice of the invention.

  16. Effect of Moisture Content of Paper Material on Laser Cutting

    NASA Astrophysics Data System (ADS)

    Stepanov, Alexander; Saukkonen, Esa; Piili, Heidi; Salminen, Antti

    Laser technology has been used in industrial processes for several decades. The most advanced development and implementation took place in laser welding and cutting of metals in automotive and ship building industries. However, there is high potential to apply laser processing to other materials in various industrial fields. One of these potential fields could be paper industry to fulfill the demand for high quality, fast and reliable cutting technology. Difficulties in industrial application of laser cutting for paper industry are associated to lack of basic information, awareness of technology and its application possibilities. Nowadays possibilities of using laser cutting for paper materials are widened and high automation level of equipment has made this technology more interesting for manufacturing processes. Promising area of laser cutting application at paper making machines is longitudinal cutting of paper web (edge trimming). There are few locations at a paper making machine where edge trimming is usually done: wet press section, calender or rewinder. Paper web is characterized with different moisture content at different points of the paper making machine. The objective of this study was to investigate the effect of moisture content of paper material on laser cutting parameters. Effect of moisture content on cellulose fibers, laser absorption and energy needed for cutting is described as well. Laser cutting tests were carried out using CO2 laser.

  17. Optimization of rock-cutting tools used in coal mining

    SciTech Connect

    Ford, L.M.; Friedman, M.

    1983-01-01

    Analytical, experimental, and observational studies have been conducted to gain a fundamental understanding of tool/rock interactions. This will allow optimization of designs for depth-of-cut, tool-spacing, kerfing, and water-jet assistance. Equations are developed that show optimum tool-spacing reduces cutting forces to nearly 50% of what a single tool requires; experimental data shows optimized kerf-depth reduces cutting forces 30% and increases volume of rock removed by a factor of about 2 or 3, thus decreasing the specific energy (compared to a single tool) by as much as 75%. Unconfined blocks of Tennessee Sandstone and Carthage Limestone were systematically grooved at depths-of-cut from 0.025 to 0.100 in. (.635 mm to 2.54 mm) with a flattened Austin AP24 Cutter while horizontal and vertical cutting forces are measured. Cutting force divided by depth-of-cut decreases with increasing depth-of-cut while cutting force divided by cross-sectional area of rock removed decreases with increasing depth-of-cut until about 0.080 in. (2.032 mm) and then increases. Water saturation reduces cutting forces by nearly 50% through lubrication and rock-strength degradation. Overall results suggest water-jet kerfing on either side of each tool could achieve 75% or more reduction in specific energy compared to a single tool. This would increase tool life, lower dust production and methane ignition probabilities, reduce equipment and maintenance costs, and allow inceasing production at lower per ton costs. Water-jet assistance ahead of the tool to increase macrofracturing also would decrease specific energy requirements.

  18. Effect of Roadside Vegetation Cutting on Moose Browsing.

    PubMed

    Tanner, Amy L; Leroux, Shawn J

    2015-01-01

    Moose (Alces americanus ) vehicle collisions (MVCs) are an issue throughout the distribution of moose. Many mitigation strategies have been tested and implemented to reduce the number of MVCs, but there have been few empirical analyses of the effectiveness of roadside vegetation cutting. The goal of this study was to determine if roadside vegetation cutting attracted moose into roadside areas to browse on the vegetation regrowth. We hypothesized that moose would be attracted to roadside areas with cut vegetation. Consequently, we predicted that there would be higher levels of browsing in cut areas compared to uncut areas. To determine if moose were browsing more in cut or uncut areas, we measured the number of plants browsed by moose in paired treatment (cut on or after 2008) and control (not cut since at least 2008) sites, along with a suite of potential environmental covariates. Using a model selection approach, we fit generalized linear mixed-effects models to determine the most parsimonious set of environmental variables to explain variation in the proportion of moose browse among sites. In contrast to our hypothesis, our results show that the proportion of moose browse in the uncut control areas was significantly higher than in the cut treatment areas. The results of this study suggest that recently cut roadside areas (7 years or less based on our work) may create a less attractive foraging habitat for moose. The majority of the variance in the proportion of moose browse among sites was explained by treatment type and nested plot number within site identification (34.16%), with additional variance explained by traffic region (5.00%) and moose density (4.35%). Based on our study, we recommend that vegetation cutting be continued in roadside areas in Newfoundland as recently cut areas may be less attractive browsing sites for moose.

  19. An Experimental Study of Cutting Performances of Worn Picks

    NASA Astrophysics Data System (ADS)

    Dogruoz, Cihan; Bolukbasi, Naci; Rostami, Jamal; Acar, Cemil

    2016-01-01

    The best means to assess rock cuttability and efficiency of cutting process for using mechanical excavation is specific energy (SE), measured in full-scale rock cutting test. This is especially true for the application of roadheaders, often fitted with drag-type cutting tools. Radial picks or drag bits are changed during the operation as they reach a certain amount of wear and become blunt. In this study, full-scale cutting tests in different sedimentary rock types with bits having various degree of wear were used to evaluate the influence of bit wear on cutting forces and specific energy. The relationship between the amount of wear as represented by the size of the wear flats at the tip of the bit, and cutting forces as well as specific energy was examined. The influence of various rock properties such as mineral content, uniaxial compressive strength, tensile strength, indentation index, shore hardness, Schmidt hammer hardness, and density with required SE of cutting using different levels of tool wear was also studied. The preliminary analysis of the data shows that the mean cutting forces increase 2-3 times and SE by 4-5 times when cutting with 4 mm wear flat as compared to cutting with new or sharp wedge shape bits. The grain size distribution of the muck for cutting different rock types and different level of bit wear was analyzed and discussed. The best fit prediction models for SE based on statistical analysis of laboratory test results are introduced. The model can be used for estimating the performance of mechanical excavators using radial tools, especially roadheaders, continuous miners and longwall drum shearers.

  20. Genetic parameters for carcass cut weight in Irish beef cattle.

    PubMed

    Pabiou, T; Fikse, W F; Näsholm, A; Cromie, A R; Drennan, M J; Keane, M G; Berry, D P

    2009-12-01

    The objective of this study was to estimate genetic parameters for the weights of different wholesale cuts, using an experimental and a commercial data set. The experimental and commercial data sets included 413 and 635 crossbred Belgian Blue, Charolais, Limousin, Angus, Holstein, and Simmental animals, respectively. Univariate analyses using a mixed linear animal model with relationships were undertaken to estimate the heritability of cold carcass weight, carcass conformation and fat, and the cut weights, whereas a series of bivariate analyses was used to estimate the phenotypic and genetic correlations between carcass weight, carcass conformation, carcass fat, and the major primal cuts. Heritability estimates for cold carcass weight in both data sets were moderate (>0.48), whereas heritability estimates for carcass conformation and fat grading were greater in the commercial data set (>0.63) than in the experimental study (>0.33). Across both data sets, heritability estimates for wholesale cut weight in the forequarter varied from 0.03 to 0.79, whereas heritability estimates of carcass cut weight in the hindquarter varied from 0.14 to 0.86. Heritability estimates for cut weights expressed as a proportion of the entire carcass weight varied from 0.04 to 0.91. Genetic correlations were strong among the different carcass cut weights within the experimental and the commercial studies. Genetic correlations between the weights of selected carcass cuts and carcass weight were moderate to high (minimum 0.45; maximum 0.88) in both data sets. Positive genetic correlations were observed in the commercial data set between the different wholesale cut weights and carcass conformation, whereas these were positive and negative in the experimental data set. Selection for increased carcass weight will, on average, increase the weight of each cut. However, the genetic correlations were less than unity, suggesting a benefit of more direct selection on high value cuts. PMID:19717761

  1. Effect of Roadside Vegetation Cutting on Moose Browsing

    PubMed Central

    Tanner, Amy L.; Leroux, Shawn J.

    2015-01-01

    Moose (Alces americanus ) vehicle collisions (MVCs) are an issue throughout the distribution of moose. Many mitigation strategies have been tested and implemented to reduce the number of MVCs, but there have been few empirical analyses of the effectiveness of roadside vegetation cutting. The goal of this study was to determine if roadside vegetation cutting attracted moose into roadside areas to browse on the vegetation regrowth. We hypothesized that moose would be attracted to roadside areas with cut vegetation. Consequently, we predicted that there would be higher levels of browsing in cut areas compared to uncut areas. To determine if moose were browsing more in cut or uncut areas, we measured the number of plants browsed by moose in paired treatment (cut on or after 2008) and control (not cut since at least 2008) sites, along with a suite of potential environmental covariates. Using a model selection approach, we fit generalized linear mixed-effects models to determine the most parsimonious set of environmental variables to explain variation in the proportion of moose browse among sites. In contrast to our hypothesis, our results show that the proportion of moose browse in the uncut control areas was significantly higher than in the cut treatment areas. The results of this study suggest that recently cut roadside areas (7 years or less based on our work) may create a less attractive foraging habitat for moose. The majority of the variance in the proportion of moose browse among sites was explained by treatment type and nested plot number within site identification (34.16%), with additional variance explained by traffic region (5.00%) and moose density (4.35%). Based on our study, we recommend that vegetation cutting be continued in roadside areas in Newfoundland as recently cut areas may be less attractive browsing sites for moose. PMID:26244576

  2. [Wound management for cuts and lacerations].

    PubMed

    Kluwe, Wolfram

    2015-02-01

    Skin cuts and lacerations are frequent injuries. A perfect result of the treatment is going without saying for the patient and its relatives. But there are some aspects to note for an adequate wound management. The main aims of wound management are clear: assist in hemostasis, to avoid infection and pain, and to ensure an esthetically pleasing scar. For these we have to treat not only the wound. Taking care for the hole patient and treating the sore pain and preventing painfull manipulations is the goal for the patients satisfaction. The basic aspects of wound healing and wound management will be described. Sutures, tissue adhesives, staples, and skin-closure tapes are options in the outpatient setting. Although suturing is the preferred method for laceration repair, tissue adhesives are similar in patient satisfaction, infection rates, and scarring risk in low skin-tension areas and may be also more cost-effective. Patient education and appropriate procedural coding are important after the repair. Please do not forget in every case to ask for the tetanus immunization and to think about an antibiotic therapy in case of human or animal bites and for wounds in risk areas and with contamination.

  3. Support growing for eradicating female genital cutting.

    PubMed

    1999-12-01

    Female genital cutting (FGC), a prevalent practice in most African countries not just seriously endangers a girl's lifetime health, but it is also considered a human rights violation. In June 1999, the Intra-Agency Working Group on FGC held a symposium with US Agency for International Development (USAID) staff to explore ways of incorporating into USAID program activities to eradicate the practice of FGC. One of the presentations at the symposium concerned "circumcision with words". This ceremony is an alternative rite of passage; it is conducted through a 5-day seclusion, culminating in a 1-day celebration including feasting and gift giving. The alternative rites include 1) self-esteem and coping with criticism; 2) responsibility for one¿s own decision; 3) dating and courtship; 4) coping with peer pressure; 5) personal hygiene; 6) marriage; 7) pregnancy and sexually transmitted disease and AIDS prevention; 8) contraception; 9) FGC, early marriage, and gender empowerment, including the rights of the girl child; 10) respect for community; and 11) respect for elders. Alternative rites of passage are gaining community acceptance and by Kenya Medical Association. None of the girls who participated in the ceremony were circumcised later. PMID:12295634

  4. Cutting laser systems for ureteral strictures

    NASA Astrophysics Data System (ADS)

    Durek, C.; Knipper, Ansgar; Brinkmann, Ralf; Miller, Ado; Gromoll, Bernd; Jocham, Dieter

    1994-02-01

    Acquired ureteral strictures are still treated either with a stent, balloon dilatation, by open surgery or by endoscopic therapy with a `cold knife' or high current density as intubated ureterotomy. The success rates described in the literature range between 50% and 90%. Using the experimental CTH:YAG laser (wavelength 2120 nm) and CT:YAG laser (wavelength 1950 nm), the reduction of invasiveness and of morbidity was evaluated. First, the CTH:YAG laser was investigated on 540 fresh porcine ureters varying the parameters. With a computerized morphometry system, defect depth, defect width, coagulation depth and coagulation width were measured. Then 21 female pigs underwent 7.5 F - 12 F ureteroscopy with CTH:YAG laser, CT:YAG laser, high current density and `cold knife' ureterotomy. An IVP and sacrification with explanation of the whole urinary tract was done on day 6 and around day 60. In practice, laser application via the endoscope was easy to handle and exact cutting was always seen. The CT:YAG laser seems to have the best success results with low ureteral stricture recurrence rates. However, its clinical use remains to be proven.

  5. Gas Tungsten Arc Welding and Plasma Arc Cutting. Teacher Edition.

    ERIC Educational Resources Information Center

    Fortney, Clarence; And Others

    This welding curriculum guide treats two topics in detail: the care of tungsten electrodes and the entire concept of contamination control and the hafnium electrode and its importance in dual-air cutting systems that use compressed shop air for plasma arc cutting activities. The guide contains three units of instruction that cover the following…

  6. INTERIOR VIEW, LOOKING SOUTH, WITH CUT TO LENGTH LEVELING LINE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    INTERIOR VIEW, LOOKING SOUTH, WITH CUT TO LENGTH LEVELING LINE MACHINE FOR GALVANIZED, COLD ROLLED, STAINLESS STEEL AND ALUMINUM AND CUT TO LENGTH LINE OPERATOR WILLIE NATHAN WHO HAS OPERATED FOR 16 YEARS. - O'Neal Steel, Incorporated, Fabrication Shop, 744 Forty-first Avenue North, Birmingham, Jefferson County, AL

  7. Scissor Sorcery: Cutting Activities for the Early Childhood Curriculum.

    ERIC Educational Resources Information Center

    Carpenter, Sharan Bryant

    This handbook, designed for use with preschool and elementary age children, provides instructions and instructional materials for the development of proficiency in cutting. Scissor cutting is a critically important activity for young children to practice because, along with coloring and pasting, it is used widely to foster the three R's as well as…

  8. 12. VIEW WEST, AREA SOUTH OF RECESS AREA, SHOWING CUT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    12. VIEW WEST, AREA SOUTH OF RECESS AREA, SHOWING CUT STONE AND RUBBLESTONE CONSTRUCTION - Bald Eagle Cross-Cut Canal Lock, North of Water Street along West Branch of Susquehanna River South bank, 500 feet East of Jay Street Bridge, Lock Haven, Clinton County, PA

  9. Chrysanthemum Cutting Productivity and Rooting Ability Are Improved by Grafting

    PubMed Central

    Zhang, Jing; Chen, Sumei; Liu, Ruixia; Jiang, Jiafu; Chen, Fadi; Fang, Weimin

    2013-01-01

    Chrysanthemum has been commercially propagated by rooting of cuttings, whereas the quality will decline over multiple collections from a single plant. Therefore, we compared the vigour, rooting ability, and some physiological parameters between cuttings harvested from nongrafted “Jinba” (non-grafted cuttings) with those collected from grafted “Jinba” plants onto Artemisia scoparia as a rootstock (grafted cuttings). The yield, length, node number, stem diameter, fresh weight, and dry weight of the grafted cuttings were superior to the non-grafted cuttings. Also grafted cuttings “Jinba” rooted 1 day earlier, but showing enhanced rooting quality including number, length, diameter, and dry weight of roots, where compared to the non-grafted. The physiological parameters that indicated contents of soluble protein, peroxidase activity, soluble sugar, and starch, ratios of soluble sugar/nitrogen ratio, and carbohydrate/nitrogen (C/N), as well as contents of indole-3-acetic acid (IAA) and abscisic acid (ABA), and IAA/ABA ratio were significantly increased in the grafted cuttings. This suggested their important parts in mediating rooting ability. Results from this study showed that grafting improved productivity and rooting ability related to an altered physiology, which provide a means to meet the increasing demand. PMID:23878523

  10. 29 CFR 1915.55 - Gas welding and cutting.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 29 Labor 7 2010-07-01 2010-07-01 false Gas welding and cutting. 1915.55 Section 1915.55 Labor... § 1915.55 Gas welding and cutting. The provisions of this section shall apply to ship repairing, shipbuilding and shipbreaking. (a) Transporting, moving and storing compressed gas cylinders. (1)...

  11. 29 CFR 1915.55 - Gas welding and cutting.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 29 Labor 7 2012-07-01 2012-07-01 false Gas welding and cutting. 1915.55 Section 1915.55 Labor... § 1915.55 Gas welding and cutting. The provisions of this section shall apply to ship repairing, shipbuilding and shipbreaking. (a) Transporting, moving and storing compressed gas cylinders. (1)...

  12. 29 CFR 1915.55 - Gas welding and cutting.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 29 Labor 7 2014-07-01 2014-07-01 false Gas welding and cutting. 1915.55 Section 1915.55 Labor... § 1915.55 Gas welding and cutting. The provisions of this section shall apply to ship repairing, shipbuilding and shipbreaking. (a) Transporting, moving and storing compressed gas cylinders. (1)...

  13. 29 CFR 1915.55 - Gas welding and cutting.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 29 Labor 7 2013-07-01 2013-07-01 false Gas welding and cutting. 1915.55 Section 1915.55 Labor... § 1915.55 Gas welding and cutting. The provisions of this section shall apply to ship repairing, shipbuilding and shipbreaking. (a) Transporting, moving and storing compressed gas cylinders. (1)...

  14. 36 CFR 223.14 - Where timber may be cut.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 36 Parks, Forests, and Public Property 2 2010-07-01 2010-07-01 false Where timber may be cut. 223.14 Section 223.14 Parks, Forests, and Public Property FOREST SERVICE, DEPARTMENT OF AGRICULTURE SALE AND DISPOSAL OF NATIONAL FOREST SYSTEM TIMBER General Provisions § 223.14 Where timber may be cut....

  15. Retail Meat Cutting I. Apprentice Meat Cutter Related Training. Revised.

    ERIC Educational Resources Information Center

    Johnson, Dale H., Ed.

    Intended as a first-year curriculum for apprentice meat cutters, this text focuses on retail meat cutting. Topics covered in the 24 chapters are background and purpose of apprenticeship, job preparation, general layout of the meat department, operational procedures, beef structure and evaluation, retail cuts and cooking methods, beef forequarter:…

  16. Deep Knowledge: A Strategy for University Budgetary Cuts

    ERIC Educational Resources Information Center

    Reynolds, Douglas B.

    2016-01-01

    During and after the Financial Crisis of 2008, many institutions of higher learning have had revenue and budgetary reductions, forcing them to make severe university budget cuts and university reductions in force. Often the university cuts are preceded by a process of evaluation of academic programs where institutions determine what they stand for…

  17. Fractal Analysis of Grain Cutting Edge Wear in Superabrasive Grinding

    NASA Astrophysics Data System (ADS)

    Ichida, Yoshio; Sato, Ryunosuke; Fujimoto, Masakazu; Tanaka, Hiromichi

    This paper deals with a fractal analysis of the wear behavior of the grain cutting edges in superabrasive grinding. Fundamental overcut fly grinding experiments for producing individual straight grooves using a grinding tool with multiple grits are carried out to clarify the wear characteristics of the grain cutting edges in the grinding process and then the change in three-dimensional profile of the cutting edge measured with a multiprobe SEM is evaluated on the basis of fractal analysis. The main results are summarized as follows: (1) Fractal dimension for the contour line of the fine cutting edge formed by micro fracture shows a higher value than that of cutting edge formed by attritious wear or large fracture. (2) Fractal dimension for cBN grain cutting edge mainly formed by micro fracture tends to take a higher value than that for diamond grain cutting edge mainly formed by attritious wear. (3) The complex change in shape of the cutting edge with the progress of grinding process can be quantitatively evaluated by means of fractal analysis.

  18. The Cuts in British Higher Education: A Symposium.

    ERIC Educational Resources Information Center

    Reid, Ivan; And Others

    1984-01-01

    Discussed are (1) how public sector higher education poses threats and opportunities for sociology; (2) the effects of budget cuts on various British universities; (3) the retention of courses in a public sector college in spite of the budget cuts; and (4) problems and potentials of strategies for dealing with retrenchment. (RM)

  19. Cut Costs! Not Corners! The Helping Hand Series.

    ERIC Educational Resources Information Center

    Nash, Claire

    This guide is intended to help employees in the hotel and catering industry to cut costs without cutting corners by showing more concern to cost containment measures and increasing personal productivity. The first three sections discuss the importance of the individual employee's behavior to overall cost containment in the workplace, and different…

  20. 49 CFR 236.722 - Circuit, cut-in.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Circuit, cut-in. 236.722 Section 236.722 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION... Circuit, cut-in. A roadway circuit at the entrance to automatic train stop, train control or cab...

  1. 49 CFR 236.722 - Circuit, cut-in.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 4 2012-10-01 2012-10-01 false Circuit, cut-in. 236.722 Section 236.722 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION... Circuit, cut-in. A roadway circuit at the entrance to automatic train stop, train control or cab...

  2. 49 CFR 236.722 - Circuit, cut-in.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 4 2014-10-01 2014-10-01 false Circuit, cut-in. 236.722 Section 236.722 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION... Circuit, cut-in. A roadway circuit at the entrance to automatic train stop, train control or cab...

  3. Serial Transmission of Plant Viruses by Cutting During Grafting

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Reciprocal grafts of two tomato (Solanum lycopersicum L.) cultivars were made by hand using commercial grafting techniques. The razor blade used to cut rootstock or scion was first contaminated by making a single cut on tomato plants infected with either tomato spotted wilt virus (TSWV) or tomato m...

  4. Sod cutting and soil biota effects on seedling performance

    NASA Astrophysics Data System (ADS)

    Weijtmans, Kim; Jongejans, Eelke; van Ruijven, Jasper

    2009-09-01

    Sod cutting (i.e. top soil removal) is a restoration management option for enhancing seedling establishment and for lowering the nutrient concentration in eutrophicated soils of nutrient-poor species-rich grasslands. Removal of the upper soil changes not only abiotic soil properties but may also affect the resident soil community. We investigated the effects of sod cutting on the establishment and performance of two endangered plant species ( Cirsium dissectum and Succisa pratensis) while simultaneously manipulating the interaction between seedlings and soil biota. In intact grassland and sod-cut areas at two localities, seedlings were grown in plastic tubes. Half of the tubes had a filter that excluded roots but allowed entry of fungal hyphae and soil microorganisms. The other tubes were closed (i.e. no contact with the surrounding soil). In a greenhouse experiment we studied the effect of soil solutions (with or without fungal tissue) from three grasslands and three sod-cut areas on seedling growth. Sod cutting had a positive net effect on seedling growth for S. pratensis. Access to (mycorrhizal) fungi and other soil biota resulted in a negative impact on seedling growth of both plant species, both in grassland and sod-cut areas. The greenhouse experiment confirmed that the soil biota in these meadows reduced seedling growth. Although sod cutting did not mitigate negative plant-soil feedback, it enhanced seedling growth, presumably by decreasing competition for light. Sod cutting is therefore very useful when seedling establishment needs to be stimulated.

  5. Chrysanthemum cutting productivity and rooting ability are improved by grafting.

    PubMed

    Zhang, Jing; Chen, Sumei; Liu, Ruixia; Jiang, Jiafu; Chen, Fadi; Fang, Weimin

    2013-01-01

    Chrysanthemum has been commercially propagated by rooting of cuttings, whereas the quality will decline over multiple collections from a single plant. Therefore, we compared the vigour, rooting ability, and some physiological parameters between cuttings harvested from nongrafted "Jinba" (non-grafted cuttings) with those collected from grafted "Jinba" plants onto Artemisia scoparia as a rootstock (grafted cuttings). The yield, length, node number, stem diameter, fresh weight, and dry weight of the grafted cuttings were superior to the non-grafted cuttings. Also grafted cuttings "Jinba" rooted 1 day earlier, but showing enhanced rooting quality including number, length, diameter, and dry weight of roots, where compared to the non-grafted. The physiological parameters that indicated contents of soluble protein, peroxidase activity, soluble sugar, and starch, ratios of soluble sugar/nitrogen ratio, and carbohydrate/nitrogen (C/N), as well as contents of indole-3-acetic acid (IAA) and abscisic acid (ABA), and IAA/ABA ratio were significantly increased in the grafted cuttings. This suggested their important parts in mediating rooting ability. Results from this study showed that grafting improved productivity and rooting ability related to an altered physiology, which provide a means to meet the increasing demand. PMID:23878523

  6. 29 CFR 1926.350 - Gas welding and cutting.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... requirements published in 49 CFR part 178, subpart C, Specification for Cylinders. (3) No damaged or defective... 29 Labor 8 2011-07-01 2011-07-01 false Gas welding and cutting. 1926.350 Section 1926.350 Labor... (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION Welding and Cutting § 1926.350 Gas welding...

  7. 29 CFR 1926.350 - Gas welding and cutting.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... requirements published in 49 CFR part 178, subpart C, Specification for Cylinders. (3) No damaged or defective... 29 Labor 8 2012-07-01 2012-07-01 false Gas welding and cutting. 1926.350 Section 1926.350 Labor... (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION Welding and Cutting § 1926.350 Gas welding...

  8. 29 CFR 1926.350 - Gas welding and cutting.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... requirements published in 49 CFR part 178, subpart C, Specification for Cylinders. (3) No damaged or defective... 29 Labor 8 2014-07-01 2014-07-01 false Gas welding and cutting. 1926.350 Section 1926.350 Labor... (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION Welding and Cutting § 1926.350 Gas welding...

  9. 29 CFR 1926.350 - Gas welding and cutting.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... requirements published in 49 CFR part 178, subpart C, Specification for Cylinders. (3) No damaged or defective... 29 Labor 8 2010-07-01 2010-07-01 false Gas welding and cutting. 1926.350 Section 1926.350 Labor... (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION Welding and Cutting § 1926.350 Gas welding...

  10. 29 CFR 1926.350 - Gas welding and cutting.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... requirements published in 49 CFR part 178, subpart C, Specification for Cylinders. (3) No damaged or defective... 29 Labor 8 2013-07-01 2013-07-01 false Gas welding and cutting. 1926.350 Section 1926.350 Labor... (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION Welding and Cutting § 1926.350 Gas welding...

  11. 49 CFR 236.722 - Circuit, cut-in.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 4 2011-10-01 2011-10-01 false Circuit, cut-in. 236.722 Section 236.722 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION... Circuit, cut-in. A roadway circuit at the entrance to automatic train stop, train control or cab...

  12. Contact diode laser application through a fiberoptic cutting tip.

    PubMed

    Peyman, G A; Cruz, S A; Ruiz-Lapuente, C

    1991-01-01

    We applied diode laser energy through a fiberoptic probe to cut ocular structures. The diameter of the probe's tip was 100 microns. The amount of energy used for cutting the lid, the cornea, or for perforation of the glove was 2.5 watts in the continuous mode. The incised border demonstrated coagulation into the healthy tissue ranging from 10 to 50 microns.

  13. Districts Face Painful Cuts as School Year Begins

    ERIC Educational Resources Information Center

    Cavanagh, Sean

    2011-01-01

    As students around the country begin the 2011-2012 school year, many of them will be returning to districts that have been forced to restructure their operations in the face of budget cuts. Leaders of those school systems have sought to avoid cuts that they believe would weaken instruction. But they also believe the reductions will put a strain on…

  14. Analysis of light scattering from a cutting tool edge.

    PubMed

    Wang, H; Malacara, D

    1994-07-01

    The scattering of light from cutting tools is studied. The contribution of cutting tool edge parameters (height and width) to scattering patterns and the influence of side surface roughness on scattering patterns are investigated. An angle-limited integrated scattering method is developed and analyzed for fast determination of edge parameters.

  15. Gamma and electron-beam irradiation of cut flowers

    NASA Astrophysics Data System (ADS)

    Kikuchi, Olivia Kimiko

    2003-01-01

    Fresh cut flowers are commodities that require quarantine treatment for export/import. In the present work some cut flowers were irradiated in a gamma panoramic source and in an electron beam accelerator with doses up to 800 Gy, and the results for the radiation tolerance of the flowers are presented.

  16. Method and apparatus for diamond wire cutting of metal structures

    DOEpatents

    Parsells, Robert; Gettelfinger, Geoff; Perry, Erik; Rule, Keith

    2005-04-19

    A method and apparatus for diamond wire cutting of metal structures, such as nuclear reactor vessels, is provided. A diamond wire saw having a plurality of diamond beads with beveled or chamfered edges is provided for sawing into the walls of the metal structure. The diamond wire is guided by a plurality of support structures allowing for a multitude of different cuts. The diamond wire is cleaned and cooled by CO.sub.2 during the cutting process to prevent breakage of the wire and provide efficient cutting. Concrete can be provided within the metal structure to enhance cutting efficiency and reduce airborne contaminants. The invention can be remotely controlled to reduce exposure of workers to radioactivity and other hazards.

  17. Application research of CO2 laser cutting natural stone plates

    NASA Astrophysics Data System (ADS)

    Ma, Lixiu; Song, Jijiang

    2009-08-01

    Now, the processing of natural stone plates is the high performance sawing machine primarily,many researchers deeply studied the processing characters in the sawing process and the strength characters during the processing. In order to realize the profiled-processing and pattern- carving of the natural stone, It lays a solid foundation for the laser cutting and the pattern-carving technology of natural stone plate. The working principle, type and characteristics of laser cutting are briefly described. The paper selects 6 kinds stone plates of natural taken as experimental sample,the experimental sample was China Shanxi Black, Old Spain Golden Yellow, New Spain Golden Yellow, Jazz White, Maple Leaf Red, Cream White respectively. Use high power CO2 laser cutting system,the stone plates cutting experiment of 6 kinds different hardness, the best working speed are obtained,The experimental results indicate that: The laser cutting speed has no correlation with the ingredient content of stone plate.

  18. [Study of cuttings identification using laser-induced breakdown spectroscopy].

    PubMed

    Tian, Ye; Wang, Zhen-nan; Hou, Hua-ming; Zhai, Xiao-wei; Ci, Xing-hua; Zheng, Rong-er

    2012-08-01

    Cutting identification is one of the most important links in the course of cutting logging which is very significant in the process of oil drilling. In the present paper, LIBS was used for identification of four kinds of cutting samples coming from logging field, and then multivariate analysis was used in data processing. The whole spectra model and the feature model were built for cuttings identification using PLS-DA method. The accuracy of the whole spectra model was 88.3%, a little more than the feature model with an accuracy of 86.7%. While in the aspect of data size, the variables were decreased from 24,041 to 27 by feature extraction, which increased the efficiency of data processing observably. The obtained results demonstrate that LIBS combined with chemometrics method could be developed as a rapid and valid approach to cutting identification and has great potential to be used in logging field. PMID:23156746

  19. High performance cutting of aircraft and turbine components

    NASA Astrophysics Data System (ADS)

    Krämer, A.; Lung, D.; Klocke, F.

    2012-04-01

    Titanium and nickel-based alloys belong to the group of difficult-to-cut materials. The machining of these high-temperature alloys is characterized by low productivity and low process stability as a result of their physical and mechanical properties. Major problems during the machining of these materials are low applicable cutting speeds due to excessive tool wear, long machining times, and thus high manufacturing costs, as well as the formation of ribbon and snarled chips. Under these conditions automation of the production process is limited. This paper deals with strategies to improve machinability of titanium and nickel-based alloys. Using the example of the nickel-based alloy Inconel 718 high performance cutting with advanced cutting materials, such as PCBN and cutting ceramics, is presented. Afterwards the influence of different cooling strategies, like high-pressure lubricoolant supply and cryogenic cooling, during machining of TiAl6V4 is shown.

  20. 3D sensing for machine guidance in meat cutting applications

    NASA Astrophysics Data System (ADS)

    Daley, Wayne; Britton, Doug; Usher, Colin; Diao, Mamadou; Ruffin, Kevin

    2005-11-01

    Most cutting and deboning operations in meat processing require accurate cuts be made to obtain maximum yield and ensure food safety. This is a significant concern for purveyors of deboned product. This task is made more difficult by the variability that is present in most natural products. The specific application of interest in this paper is the production of deboned poultry breast. This is typically obtained from a cut of the broiler called a 'front half' that includes the breast and the wings. The deboning operation typically consists of a cut that starts at the shoulder joint and then continues along the scapula. Attentive humans with training do a very good job of making this cut. The breast meat is then removed by pulling on the wings. Inaccurate cuts lead to poor yield (amount of boneless meat obtained relative to the weight of the whole carcass) and increase the probability that bone fragments might end up in the product. As equipment designers seek to automate the deboning operation, the cutting task has been a significant obstacle to developing automation that maximizes yield without generating unacceptable levels of bone fragments. The current solution is to sort the bone-in product into different weight ranges and then to adjust the deboning machines to the average of these weight ranges. We propose an approach for obtaining key cut points by extrapolation from external reference points based on the anatomy of the bird. We show that this approach can be implemented using a stereo imaging system, and the accuracy in locating the cut points of interest is significantly improved. This should result in more accurate cuts and with this concomitantly improved yield while reducing the incidence of bones. We also believe the approach could be extended to the processing of other species.

  1. Post-cutting flavor changes in freshly harvested Gala apples and in fresh-cuts prepared after controlled atmosphere storage.

    Technology Transfer Automated Retrieval System (TEKTRAN)

    A fair amount of fresh-cut apple research has been performed; yet the main focus has been on browning, edible coatings, and ripening inhibition, with little sensory and flavor analysis. Subsequently, a fresh-cut storage study was performed with the goal to monitor flavor and sensory changes in fres...

  2. Effect of UV-B light and different cutting styles on antioxidant enhancement of commercial fresh-cut carrot products

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Carrots are a rich source of antioxidants. Fresh-cut processing provides a convenient way to consume this nutritious root crop. Cutting operations induce wounding stress activation of phenylalanine ammonia-lyase (PAL) and chalcone synthase, and enhance the nutrient content of carrots by increasing t...

  3. GSFC Cutting Edge Avionics Technologies for Spacecraft

    NASA Technical Reports Server (NTRS)

    Luers, Philip J.; Culver, Harry L.; Plante, Jeannette

    1998-01-01

    With the launch of NASA's first fiber optic bus on SAMPEX in 1992, GSFC has ushered in an era of new technology development and insertion into flight programs. Predating such programs the Lewis and Clark missions and the New Millenium Program, GSFC has spearheaded the drive to use cutting edge technologies on spacecraft for three reasons: to enable next generation Space and Earth Science, to shorten spacecraft development schedules, and to reduce the cost of NASA missions. The technologies developed have addressed three focus areas: standard interface components, high performance processing, and high-density packaging techniques enabling lower cost systems. To realize the benefits of standard interface components GSFC has developed and utilized radiation hardened/tolerant devices such as PCI target ASICs, Parallel Fiber Optic Data Bus terminals, MIL-STD-1773 and AS1773 transceivers, and Essential Services Node. High performance processing has been the focus of the Mongoose I and Mongoose V rad-hard 32-bit processor programs as well as the SMEX-Lite Computation Hub. High-density packaging techniques have resulted in 3-D stack DRAM packages and Chip-On-Board processes. Lower cost systems have been demonstrated by judiciously using all of our technology developments to enable "plug and play" scalable architectures. The paper will present a survey of development and insertion experiences for the above technologies, as well as future plans to enable more "better, faster, cheaper" spacecraft. Details of ongoing GSFC programs such as Ultra-Low Power electronics, Rad-Hard FPGAs, PCI master ASICs, and Next Generation Mongoose processors.

  4. Whole-head washing, prior to cutting, provides sanitization advantages for fresh-cut Iceberg lettuce (Latuca sativa L.).

    PubMed

    Palma-Salgado, Sindy; Pearlstein, Arne J; Luo, Yaguang; Park, Hee Kyung; Feng, Hao

    2014-06-01

    The efficacy of two leafy produce wash methods, the traditional cutting-before-washing process and a new washing-before-cutting method, on reduction of Escherichia coli O157:H7 inoculated on Iceberg lettuce was compared. The washing tests were conducted in a pilot-scale washer using combinations of water, chlorine, peroxyacetic acid, and ultrasound. The washing-before-cutting process recorded an E. coli O157:H7 count reduction 0.79-0.80 log₁₀ CFU/g higher than that achieved with the cutting-before-washing process in treatments involving only a sanitizer. When ultrasound was applied to the washing-before-cutting process, a further improvement of 0.37-0.68 log₁₀ CFU/g in microbial count reduction was obtained, reaching total reductions of 2.43 and 2.24 log₁₀ CFU/g for chlorine and peroxyacetic acid washes, respectively. PMID:24704862

  5. CAMX - A High Performance Cutting Technique for Underwater Use

    SciTech Connect

    Bach, Fr.-W.; Versemann, R.; Bienia, H.; Kremer, G.

    2003-02-27

    During the past years a new cutting technology, the CAMX-process-family (Contact-Arc-Metal-X [X is for Cutting, Grinding and Drilling]) was developed at the Institute of Materials Science in Hanover. These are electro-thermal underwater separation processes for metallic structures. The CAMX technology covers the Contact-Arc-Metal- Cutting (CAMC) with a sword-like cutting electrode, the Contact-Arc-Metal-Grinding (CAMG) with a rotating electrode and the Contact-Arc-Metal-Drilling (CAMD) with a wrap mechanism to fix and carry the workpiece. There are no limitations of CAMC concerning the capability of cutting complicated structures of workpieces. Undercuts and cavities in the workpiece do not affect the CAMC. The CAMG is a separation process for straight cuts with a very high cutting speed. The CAMD is a technology to drill holes or pocket holes of any geometry. With the integrated wrap mechanism it is possible to fix and carry workpieces, which are not to handle with conventional mechanisms.

  6. Numerical simulation of rock cutting using 2D AUTODYN

    NASA Astrophysics Data System (ADS)

    Woldemichael, D. E.; Rani, A. M. Abdul; Lemma, T. A.; Altaf, K.

    2015-12-01

    In a drilling process for oil and gas exploration, understanding of the interaction between the cutting tool and the rock is important for optimization of the drilling process using polycrystalline diamond compact (PDC) cutters. In this study the finite element method in ANSYS AUTODYN-2D is used to simulate the dynamics of cutter rock interaction, rock failure, and fragmentation. A two-dimensional single PDC cutter and rock model were used to simulate the orthogonal cutting process and to investigate the effect of different parameters such as depth of cut, and back rake angle on two types of rocks (sandstone and limestone). In the simulation, the cutting tool was dragged against stationary rock at predetermined linear velocity and the depth of cut (1,2, and 3 mm) and the back rake angles(-10°, 0°, and +10°) were varied. The simulation result shows that the +10° back rake angle results in higher rate of penetration (ROP). Increasing depth of cut leads to higher ROP at the cost of higher cutting force.

  7. Bidirectional motility of the fission yeast kinesin-5, Cut7

    SciTech Connect

    Edamatsu, Masaki

    2014-03-28

    Highlights: • Motile properties of Cut7 (fission yeast kinesin-5) were studied for the first time. • Half-length Cut7 moved toward plus-end direction of microtubule. • Full-length Cut7 moved toward minus-end direction of microtubule. • N- and C-terminal microtubule binding sites did not switch the motile direction. - Abstract: Kinesin-5 is a homotetrameric motor with its motor domain at the N-terminus. Kinesin-5 crosslinks microtubules and functions in separating spindle poles during mitosis. In this study, the motile properties of Cut7, fission yeast kinesin-5, were examined for the first time. In in vitro motility assays, full-length Cut7 moved toward minus-end of microtubules, but the N-terminal half of Cut7 moved toward the opposite direction. Furthermore, additional truncated constructs lacking the N-terminal or C-terminal regions, but still contained the motor domain, did not switch the motile direction. These indicated that Cut7 was a bidirectional motor, and microtubule binding regions at the N-terminus and C-terminus were not involved in its directionality.

  8. Cutting Efficiency of Instruments with Different Movements: a Comparative Study

    PubMed Central

    Plotino, Gianluca; Al-Sudani, Dina; Rubini, Alessio Giansiracusa; Sannino, Gianpaolo; Piasecki, Lucila; Putortì, Ermanno; Testarelli, Luca; Gambarini, Gianluca

    2015-01-01

    ABSTRACT Objectives The aim of the present study was to evaluate the cutting efficiency of two new reciprocating instruments, Twisted File Adaptive and WaveOne Primary. Material and Methods 10 new Twisted File Adaptive (TF Adaptive) (SybronEndo, Glendora, CA, USA) and 10 new WaveOne Primary files (Dentsply Maillefer, Ballaigues, Switzerland) were activated using a torque-controlled motor, respectively TFA motor (SybronEndo, Glendora, CA, USA) and Silver motor (VDW, Munich, Germany). The device used for the cutting test consisted on a mainframe to which a mobile plastic support for the hand-piece is connected and a stainless-steel block containing a Plexiglas block against which the cutting efficiency of the instruments was tested. The length of the block cut in 1 minute was measured in a computerized program with a precision of 0.1 mm. Mean and standard deviations of each group were calculated and data were statistically analyzed with one-way ANOVA and Bonferroni t test (P < 0.05). Results TF Adaptive displayed significantly greater maximum penetration depth than WaveOne Primary (P < 0.05). In fact, TF Adaptive instruments (Group 1) cut the Plexiglas block to a mean depth of 8.7 (SD 0.5) mm, while WaveOne Primary instruments cut the Plexiglas block to a mean depth of 6.4 (SD 0.3) mm. Conclusions Twisted File Adaptive instruments demonstrated statistically higher cutting efficiency than WaveOne instruments. PMID:25937877

  9. Muscle profiling to improve the value of retail meat cuts.

    PubMed

    Jung, E Y; Hwang, Y H; Joo, S T

    2016-10-01

    Nutrition and meat quality are always important to consumers, but vary by individual muscle or muscle groups in retail meat cuts. Muscle profiling of nutrient content and palatability for all retail beef cuts is necessary to suggest healthy and tasty beef cuts and to inform consumers of the benefits of beef consumption. The current paper reviews numerous studies that provide muscle profiles for nutrients and palatability attributes of muscles or muscle groups in retail beef cuts. The composition of nutrients including protein, fat, moisture, vitamins, and minerals in beef cuts is documented as well as the nutritive role as a part of a healthy diet. In addition, this review presents knowledge in relation to innovative carcass fabrication and value-added cuts to improve the value of beef carcass. Finally, the current work emphasize the palatability assessment of individual beef muscles, and concludes that all retail beef cuts should be merchandised for proper cooking according to the palatability profiles of beef muscles. PMID:27134030

  10. Analysis of acoustic signals on welding and cutting

    SciTech Connect

    Morita, Takao; Ogawa, Yoji; Sumitomo, Takashi

    1995-12-31

    The sounds emitted during the welding and cutting processes are closely related to the processing phenomena, and sometimes they provide useful information for evaluation of their processing conditions. The analyses of acoustic signals from arc welding, plasma arc cutting, oxy-flame cutting, and water jet cutting are carried out in details in order to develop effective signal processing algorithm. The sound from TIG arc welding has the typical line spectrum which principal frequency, is almost the same as that of supplied electricity. The disturbance of welding process is clearly appeared oil the acoustic emission. The sound exposure level for CO{sub 2} or MIG welding is higher than that for TIG welding, and the relative intensity of the typical line spectrum caused by supplied electricity becomes low. But the sudden transition of welding condition oil produces an apparent change of sound exposure level. On the contrary, the acoustics from cutting processes are much louder than those of arc welding and show more chaotic behavior because the supplied fluid velocity and temperature of arc for cutting processes are much higher than those for welding processes. Therefore, it requires a special technique to extract the well meaning signals from the loud acoustic sounds. Further point of view, the reduction of acoustic exposure level becomes an important research theme with the growth of application fields of cutting processes.

  11. The cutting of cocaine and heroin: A critical review.

    PubMed

    Broséus, Julian; Gentile, Natacha; Esseiva, Pierre

    2016-05-01

    The illicit drug cutting represents a complex problem that requires the sharing of knowledge from addiction studies, toxicology, criminology and criminalistics. Therefore, cutting is not well known by the forensic community. Thus, this review aims at deciphering the different aspects of cutting, by gathering information mainly from criminology and criminalistics. It tackles essentially specificities of cocaine and heroin cutting. The article presents the detected cutting agents (adulterants and diluents), their evolution in time and space and the analytical methodology implemented by forensic laboratories. Furthermore, it discusses when, in the history of the illicit drug, cutting may take place. Moreover, researches studying how much cutting occurs in the country of destination are analysed. Lastly, the reasons for cutting are addressed. According to the literature, adulterants are added during production of the illicit drug or at a relatively high level of its distribution chain (e.g. before the product arrives in the country of destination or just after its importation in the latter). Their addition seems hardly justified by the only desire to increase profits or to harm consumers' health. Instead, adulteration would be performed to enhance or to mimic the illicit drug effects or to facilitate administration of the drug. Nowadays, caffeine, diltiazem, hydroxyzine, levamisole, lidocaïne and phenacetin are frequently detected in cocaine specimens, while paracetamol and caffeine are almost exclusively identified in heroin specimens. This may reveal differences in the respective structures of production and/or distribution of cocaine and heroin. As the relevant information about cutting is spread across different scientific fields, a close collaboration should be set up to collect essential and unified data to improve knowledge and provide information for monitoring, control and harm reduction purposes. More research, on several areas of investigation, should be

  12. NiTinol-based cutting edges for endovascular heart valve resection: first in-vitro cutting results.

    PubMed

    Wendt, Daniel; Stühle, Sebastian; Kawa, Emilia; Thielmann, Matthias; Kipfmüller, Brigitte; Wendt, Hermann; Hauck, Florian; Vogel, Bernd; Fischer, Harald; Jakob, Heinz

    2009-01-01

    Machining of shape memory alloys based on Nitinol (NiTi) creates difficulties due to its ductility and severe strain hardening. In this experiment, different cutting edges and grinding parameters were tested to optimize cutting results on NiTi-based blades intended for endovascular heart valve resection. The cutting procedure was performed using two counter-rotating circular NiTi blades of different diameter. A rotating/punching process should be performed. Different shapes (glazed, waved, and saw tooth), different grinding techniques (manual, manual grinder, and precise milling cutter) and additionally various velocities (50 and 200 rpm) were tested on specific test specimens. Cutting forces were measured and cutting quality was examined using digital microscopy. Preliminary tests with rotating blades showed superior results using cutting edges for the punching process (150 N vs. 200 N; n=7). In a second step special test specimens were tested. Maximum cutting-force was 265 N+/-20 N (mean+/-SD; n=7). Subsequently different shapes were tested at 50 and 200 rpm using the rotating/punching method regarding alternate grinding techniques. Cutting forces were 27 N+/-7.7 N for glazed blades (n=7) at 50 rpm and 18 N+/-4.7 N at 200 rpm, waved blades (n=7) required a maximum force of 18 N+/-5 N at 50 rpm and 11 N+/-3.3 N at 200 rpm, whereas saw tooth blades (n=7) needed 17 N+/-12.7 N at 50 rpm and 9 N+/-1.2 N at 200 rpm. Precise cutting quality was only seen when using glazed blades sharpened under accurate conditions with a high-speed milling cutter. Although shape memory alloys based on Nitinol are difficult to process, and well-defined grinding parameters do not exist, acceptable results can be reached using high-speed milling cutters. Best cutting quality can be observed by using glazed blades, performing a rotating/punching process at high velocities. Lower cutting forces can be observed by using other shape-types, however this leads to lower cutting quality. Therefore

  13. Effect of the spray pattern, water flow rate, and cutting position on the cutting efficiency of high-speed dental handpieces.

    PubMed

    Yang, Wen-jie; Sun, Jian

    2013-01-01

    The aim of this study was to evaluate the effect of the spray pattern, water flow rate, and cutting position on the cutting efficiency of high-speed dental handpieces. One- and three-port high-speed handpieces were selected. Cutting efficiency (mm/s) in different cutting positions was evaluated in vitro on machinable ceramic underwater flow rates of 15, 25, and 35 mL/min. Statistical analysis revealed significant differences in cutting efficiency for the various cutting positions and flow rates. The authors recommend multiport handpieces with a flow rate greater than 30 mL/min for use in clinical practice, especially during groove cutting.

  14. Genetic variation in rooting ability of loblolly pine cuttings: effects of auxin and family on rooting by hypocotyl cuttings.

    PubMed

    Greenwood, M S; Weir, R J

    1995-01-01

    After about 20 days, hypocotyl cuttings from 20-day-old loblolly pine (Pinus taeda L.) seedlings rooted easily in the presence of the auxin indole-3-butyric acid (IBA), with roots forming directly from xylem parenchyma. In contrast, woody cuttings from 1-2-year-old hedged seedlings formed roots indirectly from callus tissue in 60-90 days, but IBA had little effect on rooting. Variation in rooting among hypocotyls from both half- and full-sib families was highly significant in response to IBA, and rooting did not occur within 20 days unless IBA was applied. Hypocotyls from poor rooting families tended to produce fewer roots per cutting than hypocotyls from good rooting families. Rooting by woody cuttings and hypocotyl cuttings from the same nine full-sib families was weakly correlated, raising the possibility that at least some common genetically controlled processes were affecting rooting by both types of cutting. The phytotropin N-1-naphthylphthalamic acid (NPA), supplied at 1 micro M with 10 micro M IBA, significantly inhibited rooting by hypocotyl cuttings from both good and poor rooting families, but there was no significant family x treatment interaction. Family variation in rooting ability may be a function of the frequency of occurrence of auxin-responsive cells in the hypocotyls. PMID:14966010

  15. Sequence-specific DNA binding of individual cut repeats of the human CCAAT displacement/cut homeodomain protein.

    PubMed

    Aufiero, B; Neufeld, E J; Orkin, S H

    1994-08-01

    CCAAT displacement protein (CDP), a nuclear protein of 180-190 kDa, contains a triplicated motif, the cut domain, similar (80-90% conserved) to three repeats of 60-65 amino acids first identified in Drosophila cut, a homeo-domain protein involved in cell-fate decisions in development. Cut repeats bind DNA and exhibit subtle differences in target-site recognition. DNA sequences specifically bound by cut repeats were isolated by PCR-mediated DNA target-site selection. Sequences selected for cut repeat 2 and 3 (CR2 and CR3) binding are A+T-rich and favor an ATA motif with similar, but not identical, flanking base preferences. CR2 and CR3 discriminate among similar target sequences. CR1, which is more divergent from CR2 and CR3, displays the most restricted pattern of DNA sequence recognition. Methylation interference analysis demonstrates different protein-DNA contacts for CR1 and CR3 binding to a target sequence. Thus, CDP/cut is a complex protein whose DNA-binding properties reflect the combinatorial interaction of four domains (three cut repeats and one homeodomain) with target DNA sequences. PMID:7914370

  16. Comparative study of 0° X-cut and Y + 36°-cut lithium niobate high-voltage sensing

    SciTech Connect

    Patel, N.; Branch, D. W.; Cular, S.; Schamiloglu, E.

    2015-08-15

    A comparison study between Y + 36° and 0° X-cut lithium niobate (LiNbO{sub 3}) was performed to evaluate the influence of crystal cut on the acoustic propagation to realize a piezoelectric high-voltage sensor. The acoustic time-of-flight for each crystal cut was measured when applying direct current (DC), alternating current (AC), and pulsed voltages. Results show that the voltage-induced shift in the acoustic wave propagation time scaled quadratically with voltage for DC and AC voltages applied to X-cut crystals. For the Y + 36° crystal, the voltage-induced shift scales linearly with DC voltages and quadratically with AC voltages. When applying 5 μs voltage pulses to both crystals, the voltage-induced shift scaled linearly with voltage. For the Y + 36° cut, the voltage-induced shift from applying DC voltages ranged from 10 to 54 ps and 35 to 778 ps for AC voltages at 640 V over the frequency range of 100 Hz–100 kHz. Using the same conditions as the Y + 36° cut, the 0° X-cut crystal sensed a shift of 10–273 ps for DC voltages and 189–813 ps for AC voltage application. For 5 μs voltage pulses, the 0° X-cut crystal sensed a voltage induced shift of 0.250–2 ns and the Y + 36°-cut crystal sensed a time shift of 0.115–1.6 ns. This suggests a frequency sensitive response to voltage where the influence of the crystal cut was not a significant contributor under DC, AC, or pulsed voltage conditions. The measured DC data were compared to a 1-D impedance matrix model where the predicted incremental length changed as a function of voltage. When the voltage source error was eliminated through physical modeling from the uncertainty budget, the combined uncertainty of the sensor (within a 95% confidence interval) decreased to 0.0033% using a Y + 36°-cut crystal and 0.0032% using an X-cut crystal for all the voltage conditions used in this experiment.

  17. Comparative study of 0° X-cut and Y+36°-cut lithium niobate high-voltage sensing

    SciTech Connect

    Patel, N.; Branch, D. W.; Schamiloglu, E.; Cular, S.

    2015-08-11

    A comparison study between Y+36° and 0° X-cut lithium niobate (LiNbO3) was performed to evaluate the influence of crystal cut on the acoustic propagation to realize a piezoelectric high-voltage sensor. The acoustic time-of-flight for each crystal cut was measured when applying direct current (DC), alternating current (AC), and pulsed voltages. Results show that the voltage-induced shift in the acoustic wave propagation time scaled quadratically with voltage for DC and AC voltages applied to X-cut crystals. For the Y+36° crystal, the voltage-induced shift scales linearly with DC voltages and quadratically with AC voltages. When applying 5 μs voltage pulses to both crystals, the voltage-induced shift scaled linearly with voltage. For the Y+36° cut, the voltage-induced shift from applying DC voltages ranged from 10 to 54 ps and 35 to 778 ps for AC voltages at 640 V over the frequency range of 100 Hz–100 kHz. Using the same conditions as the Y+36° cut, the 0° X-cut crystal sensed a shift of 10–273 ps for DC voltages and 189–813 ps for AC voltage application. For 5 μs voltage pulses, the 0° X-cut crystal sensed a voltage induced shift of 0.250–2 ns and the Y+36°-cut crystal sensed a time shift of 0.115–1.6 ns. This suggests a frequency sensitive response to voltage where the influence of the crystal cut was not a significant contributor under DC, AC, or pulsed voltage conditions. The measured DC data were compared to a 1-D impedance matrix model where the predicted incremental length changed as a function of voltage. Furthermore, when the voltage source error was eliminated through physical modeling from the uncertainty budget, the combined uncertainty of the sensor (within a 95% confidence interval) decreased to 0.0033% using a Y + 36°-cut crystal and 0.0032% using an X-cut crystal for all the voltage conditions used in this experiment.

  18. Comparative study of 0° X-cut and Y+36°-cut lithium niobate high-voltage sensing

    DOE PAGESBeta

    Patel, N.; Branch, D. W.; Schamiloglu, E.; Cular, S.

    2015-08-11

    A comparison study between Y+36° and 0° X-cut lithium niobate (LiNbO3) was performed to evaluate the influence of crystal cut on the acoustic propagation to realize a piezoelectric high-voltage sensor. The acoustic time-of-flight for each crystal cut was measured when applying direct current (DC), alternating current (AC), and pulsed voltages. Results show that the voltage-induced shift in the acoustic wave propagation time scaled quadratically with voltage for DC and AC voltages applied to X-cut crystals. For the Y+36° crystal, the voltage-induced shift scales linearly with DC voltages and quadratically with AC voltages. When applying 5 μs voltage pulses to bothmore » crystals, the voltage-induced shift scaled linearly with voltage. For the Y+36° cut, the voltage-induced shift from applying DC voltages ranged from 10 to 54 ps and 35 to 778 ps for AC voltages at 640 V over the frequency range of 100 Hz–100 kHz. Using the same conditions as the Y+36° cut, the 0° X-cut crystal sensed a shift of 10–273 ps for DC voltages and 189–813 ps for AC voltage application. For 5 μs voltage pulses, the 0° X-cut crystal sensed a voltage induced shift of 0.250–2 ns and the Y+36°-cut crystal sensed a time shift of 0.115–1.6 ns. This suggests a frequency sensitive response to voltage where the influence of the crystal cut was not a significant contributor under DC, AC, or pulsed voltage conditions. The measured DC data were compared to a 1-D impedance matrix model where the predicted incremental length changed as a function of voltage. Furthermore, when the voltage source error was eliminated through physical modeling from the uncertainty budget, the combined uncertainty of the sensor (within a 95% confidence interval) decreased to 0.0033% using a Y + 36°-cut crystal and 0.0032% using an X-cut crystal for all the voltage conditions used in this experiment.« less

  19. 8. GENERAL VIEW OF SHINGLE CUTTING SAWS THAT HANDLE BOLTS ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    8. GENERAL VIEW OF SHINGLE CUTTING SAWS THAT HANDLE BOLTS AFTER DEBARKING; AFTER DEBARKING THE BOLTS ARE SENT TO THE SHINGLE WEAVER FOR SAWING - Lester Shingle Mill, 1602 North Eighteenth Street, Sweet Home, Linn County, OR

  20. Mission Specialist (MS) Lenoir cuts Pilot Overmyer's hair on middeck

    NASA Technical Reports Server (NTRS)

    1982-01-01

    Mission Specialist (MS) Lenoir, using hairbrush and scissors, cuts Pilot Overmyer's hair and trims his sideburns in front of forward middeck lockers. Personal hygiene kit (open), towels, and field sequential (FS) crew cabin camera are attached to lockers.

  1. Mission Specialist (MS) Lenoir cuts Pilot Overmyer's hair on middeck

    NASA Technical Reports Server (NTRS)

    1982-01-01

    Mission Specialist (MS) Lenoir, using hairbrush and scissors, cuts Pilot Overmyer's hair and trims his sideburns in front of forward middeck lockers. Personal hygiene kit (open), towels, meal tray assemblies, and field sequential (FS) crew cabincamera are attached to lockers.

  2. Predicting Cutting Forces in Aluminum Using Polynomial Classifiers

    NASA Astrophysics Data System (ADS)

    Kadi, H. El; Deiab, I. M.; Khattab, A. A.

    Due to increased calls for environmentally benign machining processes, there has been focus and interest in making processes more lean and agile to enhance efficiency, reduce emissions and increase profitability. One approach to achieving lean machining is to develop a virtual simulation environment that enables fast and reasonably accurate predictions of various machining scenarios. Polynomial Classifiers (PCs) are employed to develop a smart data base that can provide fast prediction of cutting forces resulting from various combinations of cutting parameters. With time, the force model can expand to include different materials, tools, fixtures and machines and would be consulted prior to starting any job. In this work, first, second and third order classifiers are used to predict the cutting coefficients that can be used to determine the cutting forces. Predictions obtained using PCs are compared to experimental results and are shown to be in good agreement.

  3. 123. Photocopied July 1978. (QMC) UNDERGROUND VIEW SHOWING MINERS CUTTING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    123. Photocopied July 1978. (QMC) UNDERGROUND VIEW SHOWING MINERS CUTTING MASS COPPER BY HAND. NOTE CANDLES USED FOR ILLUMINATION. MINING CAPTAIN IN WHITE. C. 1890. - Quincy Mining Company, Hancock, Houghton County, MI

  4. DETAIL OF NORTHEAST CUT STONE ABUTMENT FROM SOUTHWEST. Cataract ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    DETAIL OF NORTHEAST CUT STONE ABUTMENT FROM SOUTHWEST. - Cataract Falls Bridge, Spanning Mill Creek, bypassed section of CR 279 (Cataract Falls Unit of Leiber State Recreation Area), Cataract, Owen County, IN

  5. INTERIOR VIEW, LOOKING WEST, WITH OXYFUEL FLAME CUTTING MACHINE AND ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    INTERIOR VIEW, LOOKING WEST, WITH OXY-FUEL FLAME CUTTING MACHINE AND OPERATOR MR. FARLEY. - O'Neal Steel, Incorporated, Fabrication Shop, 744 Forty-first Avenue North, Birmingham, Jefferson County, AL

  6. 49 CFR 236.737 - Cut-section, relayed.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ...-section, relayed. A cut-section where the energy for one track circuit is supplied through front contacts or through front and polar contacts of the track relay for the adjoining track circuit....

  7. 14. DETAIL, TYPICAL CUT STONE MASONRY FACING BLOCKS, AT BASE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    14. DETAIL, TYPICAL CUT STONE MASONRY FACING BLOCKS, AT BASE OF BRIDGE, FROM SOUTHEAST, SHOWING MASONS MARKS, MOORING RING, AND PORTION OF SUBMERGED TIMBER GRILLAGE - Boston Street Bridge, Spanning Harris Creek Sewer at Boston Street, Baltimore, Independent City, MD

  8. 16. SAME ROOMOAK FRAMES, CUT FROM PATTERNS, ARE READIED FOR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    16. SAME ROOM-OAK FRAMES, CUT FROM PATTERNS, ARE READIED FOR CLAMPING AND GLUING ON WORKBENCH. COMPLETED BOATS CAN BE SEEN ON RIVER OUTSIDE WINDOW. - Lowell's Boat Shop, 459 Main Street, Amesbury, Essex County, MA

  9. Early Introduction of Eggs, Peanuts May Cut Kids' Allergy Risk

    MedlinePlus

    ... Early Introduction of Eggs, Peanuts May Cut Kids' Allergy Risk: Study Allergy specialist suggests existing guidelines on introducing foods may ... on may help reduce their risk of food allergies, a new analysis finds. Researchers reviewed 146 previous ...

  10. 6. SEAWARD VIEW OF BOAT LANDING CUT INTO ROCK, ALSO ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    6. SEAWARD VIEW OF BOAT LANDING CUT INTO ROCK, ALSO SHOWING CEMENT POURED ATOP TUNNEL. - Mile Rock Tunnel, Under Forty-eighth Avenue from Cabrillo Street to San Francisco Bay at Point Lobos, San Francisco, San Francisco County, CA

  11. Sensitive analysis of a finite element model of orthogonal cutting

    NASA Astrophysics Data System (ADS)

    Brocail, J.; Watremez, M.; Dubar, L.

    2011-01-01

    This paper presents a two-dimensional finite element model of orthogonal cutting. The proposed model has been developed with Abaqus/explicit software. An Arbitrary Lagrangian-Eulerian (ALE) formulation is used to predict chip formation, temperature, chip-tool contact length, chip thickness, and cutting forces. This numerical model of orthogonal cutting will be validated by comparing these process variables to experimental and numerical results obtained by Filice et al. [1]. This model can be considered to be reliable enough to make qualitative analysis of entry parameters related to cutting process and frictional models. A sensitivity analysis is conducted on the main entry parameters (coefficients of the Johnson-Cook law, and contact parameters) with the finite element model. This analysis is performed with two levels for each factor. The sensitivity analysis realised with the numerical model on the entry parameters has allowed the identification of significant parameters and the margin identification of parameters.

  12. Doctors' Decision-Making Tool Could Cut Unnecessary Antibiotic Use

    MedlinePlus

    ... medlineplus.gov/news/fullstory_160770.html Doctors' Decision-Making Tool Could Cut Unnecessary Antibiotic Use A drop ... Sept. 2, 2016 (HealthDay News) -- A new decision-making tool for doctors may help reduce unnecessary use ...

  13. 113. Doughton Park Recreation Area. Distant view of road cut, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    113. Doughton Park Recreation Area. Distant view of road cut, roadway, and stone railing at ice cliffs. Looking northeast. - Blue Ridge Parkway, Between Shenandoah National Park & Great Smoky Mountains, Asheville, Buncombe County, NC

  14. 112. Doughton Park Recreation Area. View of road cut at ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    112. Doughton Park Recreation Area. View of road cut at ice cliffs. Looking east-northeast. - Blue Ridge Parkway, Between Shenandoah National Park & Great Smoky Mountains, Asheville, Buncombe County, NC

  15. Could New 'Talk Therapy' Cut Cost of Treating Depression?

    MedlinePlus

    ... Could New 'Talk Therapy' Cut Cost of Treating Depression? Behavioral activation would be more accessible than currently ... gold-standard treatment -- cognitive behavioral therapy -- for treating depression in adults, a new study suggests. The researchers ...

  16. FDA: Cutting-Edge Technology Sheds Light on Antibiotic Resistance

    MedlinePlus

    ... FDA is using cutting-edge technology called whole genome sequencing (WGS). A genome is an organism’s complete set of genes. In the 20 years since the first bacterial genome was completely sequenced, the science has advanced dramatically. ...

  17. Engineering the shape and structure of materials by fractal cut

    PubMed Central

    Cho, Yigil; Shin, Joong-Ho; Costa, Avelino; Kim, Tae Ann; Kunin, Valentin; Li, Ju; Lee, Su Yeon; Yang, Shu; Han, Heung Nam; Choi, In-Suk; Srolovitz, David J.

    2014-01-01

    In this paper we discuss the transformation of a sheet of material into a wide range of desired shapes and patterns by introducing a set of simple cuts in a multilevel hierarchy with different motifs. Each choice of hierarchical cut motif and cut level allows the material to expand into a unique structure with a unique set of properties. We can reverse-engineer the desired expanded geometries to find the requisite cut pattern to produce it without changing the physical properties of the initial material. The concept was experimentally realized and applied to create an electrode that expands to >800% the original area with only very minor stretching of the underlying material. The generality of our approach greatly expands the design space for materials so that they can be tuned for diverse applications. PMID:25422433

  18. Elevation of Warrington Avenue Bridge and cut stone retaining wall ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Elevation of Warrington Avenue Bridge and cut stone retaining wall southbound on Warrington Avenue - Pittsburgh & Castle Shannon Railroad, Warrington Avenue Bridge, Overbrook Trolley Line, Crossing Warrington Avenue, Pittsburgh, Allegheny County, PA

  19. Ag-catalysed cutting of multi-walled carbon nanotubes.

    PubMed

    La Torre, A; Rance, G A; Miners, S A; Herreros Lucas, C; Smith, E F; Fay, M W; Zoberbier, T; Giménez-López, M C; Kaiser, U; Brown, P D; Khlobystov, A N

    2016-04-29

    In this work, the cutting of carbon nanotubes is investigated using silver nanoparticles deposited on arc discharge multi-walled carbon nanotubes. The composite is subsequently heated in air to fabricate shortened multi-walled nanotubes. Complementary transmission electron microscopy and spectroscopy techniques shed light on the cutting mechanism. The nanotube cutting is catalysed by the fundamental mechanism based on the coordination of the silver atoms to the π-bonds of carbon nanotubes. As a result of the metal coordination, the strength of the carbon-carbon bond is reduced, promoting the oxidation of carbon at lower temperature when heated in air, or lowering the activation energy required for the removal of carbon atoms by electron beam irradiation, assuring in both cases the cutting of the nanotubes.

  20. Ag-catalysed cutting of multi-walled carbon nanotubes

    NASA Astrophysics Data System (ADS)

    La Torre, A.; Rance, G. A.; Miners, S. A.; Herreros Lucas, C.; Smith, E. F.; Fay, M. W.; Zoberbier, T.; Giménez-López, M. C.; Kaiser, U.; Brown, P. D.; Khlobystov, A. N.

    2016-04-01

    In this work, the cutting of carbon nanotubes is investigated using silver nanoparticles deposited on arc discharge multi-walled carbon nanotubes. The composite is subsequently heated in air to fabricate shortened multi-walled nanotubes. Complementary transmission electron microscopy and spectroscopy techniques shed light on the cutting mechanism. The nanotube cutting is catalysed by the fundamental mechanism based on the coordination of the silver atoms to the π-bonds of carbon nanotubes. As a result of the metal coordination, the strength of the carbon-carbon bond is reduced, promoting the oxidation of carbon at lower temperature when heated in air, or lowering the activation energy required for the removal of carbon atoms by electron beam irradiation, assuring in both cases the cutting of the nanotubes.

  1. Meta-Envy-Free Cake-Cutting Protocols

    NASA Astrophysics Data System (ADS)

    Manabe, Yoshifumi; Okamoto, Tatsuaki

    This paper discusses cake-cutting protocols when the cake is a heterogeneous good that is represented by an interval in the real line. We propose a new desirable property, the meta-envy-freeness of cake-cutting, which has not been formally considered before. Though envy-freeness was considered to be one of the most important desirable properties, envy-freeness does not prevent envy about role assignment in the protocols. We define meta-envy-freeness that formalizes this kind of envy. We show that current envy-free cake-cutting protocols do not satisfy meta-envy-freeness. Formerly proposed properties such as strong envy-free, exact, and equitable do not directly consider this type of envy and these properties are very difficult to realize. This paper then shows meta-envy-free cake-cutting protocols for two and three party cases.

  2. 10. CUT OF THE CHURCH BUILDING AS IT APPEARED ON ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    10. CUT OF THE CHURCH BUILDING AS IT APPEARED ON THE PRINTED PROGRAM OF THE JANUARY 1, 1893 DEDICATION SERVICE. - Second Presbyterian Church, Pontatoc Avenue & Hernando Street, Memphis, Shelby County, TN

  3. NORTH NORTHWEST, SHOWING ABUTMENTS AND PIER MADE OF CUT, SQUARED ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    NORTH NORTHWEST, SHOWING ABUTMENTS AND PIER MADE OF CUT, SQUARED STONE WITH MORTARED JOINTS. - Crum Bridge, Spanning Little Muskingum River, TR 384A (formerly Old Camp Road), Rinard Mills, Monroe County, OH

  4. The influence of drill cuttings on physical characteristics of phytodetritus.

    PubMed

    Pabortsava, Katsiaryna; Purser, Autun; Wagner, Hannes; Thomsen, Laurenz

    2011-10-01

    Sinking of aggregated phytoplankton cells is a crucial mechanism for transporting carbon to the seafloor and benthic ecosystem, with such aggregates often scavenging particulate material from the water column as they sink. In the vicinity of drilling rigs used by the oil and gas industry, the concentration of particulate matter in the water column may at times be enriched as a result of the discharge of 'drill cuttings' - drilling waste material. This investigation exposed laboratory produced phytoplankton aggregates to drill cuttings of various composition (those containing no hydrocarbons from reservoir rocks and those with a <1% hydrocarbon content) and assessed the change in aggregate size, settling rate and resuspension behavior of these using resuspension chambers and settling cylinders. Results indicate that both settling velocity and seabed stress required to resuspend the aggregates are greater in aggregates exposed to drill cuttings, with these increases most significant in aggregates exposed to hydrocarbon containing drill cuttings. PMID:21839484

  5. Engineering the shape and structure of materials by fractal cut.

    PubMed

    Cho, Yigil; Shin, Joong-Ho; Costa, Avelino; Kim, Tae Ann; Kunin, Valentin; Li, Ju; Lee, Su Yeon; Yang, Shu; Han, Heung Nam; Choi, In-Suk; Srolovitz, David J

    2014-12-01

    In this paper we discuss the transformation of a sheet of material into a wide range of desired shapes and patterns by introducing a set of simple cuts in a multilevel hierarchy with different motifs. Each choice of hierarchical cut motif and cut level allows the material to expand into a unique structure with a unique set of properties. We can reverse-engineer the desired expanded geometries to find the requisite cut pattern to produce it without changing the physical properties of the initial material. The concept was experimentally realized and applied to create an electrode that expands to >800% the original area with only very minor stretching of the underlying material. The generality of our approach greatly expands the design space for materials so that they can be tuned for diverse applications. PMID:25422433

  6. Smart City Planning Can Cut Deadly Diseases, Improve Air Quality

    MedlinePlus

    ... https://medlineplus.gov/news/fullstory_161133.html Smart City Planning Can Cut Deadly Diseases, Improve Air Quality Study ... three quarters of this population living in cities, city planning must be part of a comprehensive solution to ...

  7. How Can I Help a Friend Who Cuts?

    MedlinePlus

    ... friend (you!), rip up old newspapers, stroke their cat or dog, play loud music and dance, or ... to talk to. Don't accidentally reinforce the behavior. Among some people, cutting can have a certain ...

  8. The influence of drill cuttings on physical characteristics of phytodetritus.

    PubMed

    Pabortsava, Katsiaryna; Purser, Autun; Wagner, Hannes; Thomsen, Laurenz

    2011-10-01

    Sinking of aggregated phytoplankton cells is a crucial mechanism for transporting carbon to the seafloor and benthic ecosystem, with such aggregates often scavenging particulate material from the water column as they sink. In the vicinity of drilling rigs used by the oil and gas industry, the concentration of particulate matter in the water column may at times be enriched as a result of the discharge of 'drill cuttings' - drilling waste material. This investigation exposed laboratory produced phytoplankton aggregates to drill cuttings of various composition (those containing no hydrocarbons from reservoir rocks and those with a <1% hydrocarbon content) and assessed the change in aggregate size, settling rate and resuspension behavior of these using resuspension chambers and settling cylinders. Results indicate that both settling velocity and seabed stress required to resuspend the aggregates are greater in aggregates exposed to drill cuttings, with these increases most significant in aggregates exposed to hydrocarbon containing drill cuttings.

  9. WM roadbed curving through a cut at milepost 158, above ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    WM roadbed curving through a cut at milepost 158, above MD 51 in Spring Gap, Maryland, looking east. - Western Maryland Railway, Cumberland Extension, Pearre to North Branch, from WM milepost 125 to 160, Pearre, Washington County, MD

  10. Bridge No. 1407, Fifth Potomac Crossing, with cut from Kessler ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Bridge No. 1407, Fifth Potomac Crossing, with cut from Kessler Tunnel in the background, looking northeast towards Maryland. - Western Maryland Railway, Cumberland Extension, Pearre to North Branch, from WM milepost 125 to 160, Pearre, Washington County, MD

  11. Spectral segmentation of polygonized images with normalized cuts

    SciTech Connect

    Matsekh, Anna; Skurikhin, Alexei; Rosten, Edward

    2009-01-01

    We analyze numerical behavior of the eigenvectors corresponding to the lowest eigenvalues of the generalized graph Laplacians arising in the Normalized Cuts formulations of the image segmentation problem on coarse polygonal grids.

  12. Surface dimpling on rotating work piece using rotation cutting tool

    DOEpatents

    Bhapkar, Rohit Arun; Larsen, Eric Richard

    2015-03-31

    A combined method of machining and applying a surface texture to a work piece and a tool assembly that is capable of machining and applying a surface texture to a work piece are disclosed. The disclosed method includes machining portions of an outer or inner surface of a work piece. The method also includes rotating the work piece in front of a rotating cutting tool and engaging the outer surface of the work piece with the rotating cutting tool to cut dimples in the outer surface of the work piece. The disclosed tool assembly includes a rotating cutting tool coupled to an end of a rotational machining device, such as a lathe. The same tool assembly can be used to both machine the work piece and apply a surface texture to the work piece without unloading the work piece from the tool assembly.

  13. 8. DETAIL SHOT OF POST AND RAIL AND CUT AWAY ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    8. DETAIL SHOT OF POST AND RAIL AND CUT AWAY VIEW OF ABUTMENT SUPPORT INTO THE GROUND - Lost Creek Road Bridge, Spanning Sevier River at County Road 243, 2 miles east of Aurora, Aurora, Sevier County, UT

  14. 14. DETAILS OF GATE OPERATING MECHANISM, SHOWING RACK SECTION, CUT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    14. DETAILS OF GATE OPERATING MECHANISM, SHOWING RACK SECTION, CUT TEETH, CAST TEETH, GATE PINION (1907) - Nine Mile Hydroelectric Development, Powerhouse, State Highway 291 along Spokane River, Nine Mile Falls, Spokane County, WA

  15. Unilateral phrenic nerve paralysis from cutting down a Christmas tree.

    PubMed

    Tiede, R H; Hover, J R; Davies, S F

    1994-11-01

    Stretch injury to the phrenic nerve is an unusual cause of unilateral diaphragmatic paralysis. In this case the injury occurred while the patient was lying on the ground and cutting down a Christmas tree with a hand saw.

  16. DETAIL OF FRONT ENTRY. SHOWING KNEE BRACES AND DECORATIVE CUT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    DETAIL OF FRONT ENTRY. SHOWING KNEE BRACES AND DECORATIVE CUT RAFTERS. PILASTERS, AND LAVA ROCK CHEEK CHEEK WALLS. VIEW FACING NORTH. - Hickam Field, Fort Kamehameha Officers' Housing Type Y, 27 Worchester Avenue, Honolulu, Honolulu County, HI

  17. Miniature oxygen-hydrogen cutting torch constructed from hypodermic needle

    NASA Technical Reports Server (NTRS)

    Shlichta, P.

    1964-01-01

    A miniature cutting torch consisting of a main body member, upon which the hydrogen and oxygen containers are mounted, valves for controlling gas flow, and a hypodermic needle that acts as a mixing tube and flame tip is constructed.

  18. Drilling cuttings on the sea bed: The options

    SciTech Connect

    Booth, M.J.

    1996-12-31

    The paper considers the options available to operators for the treatment of drilling cuttings on the seabed under and around the offshore installations on the UKCS (UK Continental Shelf). The options range from leaving in place to removal or bioremediation. There are a number of practical problems to be overcome and not enough is known about the environmental effects of disturbing the cuttings. Further research and development is suggested.

  19. Production Recesses for Replaceable Cutting Inserts of Milling Tools

    NASA Astrophysics Data System (ADS)

    Kousal, Lukáš; Sadílek, Marek

    2014-12-01

    This article describes the production of recesses for replaceable cutting inserts of milling tools. The recess manufacture is exemplified on a D20 shanktype milling cutter with three replaceable cutting inserts. A new production technology and its operating cycle are demonstrated. A com-parison of the old and the new technologies shows the percentage saving of change cycles and used tools, including overall evaluation of the tech-nology.

  20. Self-cutting versus intentional overdose: psychological risk factors.

    PubMed

    Larkin, C; Di Blasi, Z; Arensman, E

    2013-08-01

    Individuals who present to emergency departments with self-harm are at elevated risk of further self-harm and suicide, and these risks are yet higher among patients who self-cut. Repetitive self-injury has previously been explained using a behaviourist approach focussing on operant conditioning, but we propose that the increased risk of self-harm repetition among those who present with self-cutting is at least partly mediated by pre-existing psychological risk factors. Several studies show that those who present with self-cutting differ from intentional overdose patients on demographic, psychiatric and social factors, but, based on findings from community-based studies, we hypothesise that there may be additional psychological differences that may also be associated with increased repetition risk. We conducted a small-scale cohort study of 29 self-harm patients presenting to A&E and compared theoretically-derived psychological variables between 8 self-cutting and 21 overdose patients. Those presenting with self-cutting scored significantly higher on hopelessness and lower on non-reactivity to inner experience and generally had a more vulnerable profile than those presenting with overdose. These findings support our hypothesis that the association between self-cutting and prospective repetition is at least partly due to pre-existing psychological vulnerabilities that increase both the likelihood of engaging in self-cutting as a method of self-harm and the likelihood of subsequent repetition of self-harm. Existing evidence suggests that self-cutting is a risk factor for repetition of self-harm, and it is possible that reducing and preventing repetition among these patients can be achieved by implementing psychological interventions to reduce hopelessness and increase tolerance of emotional distress.

  1. Laser Cutting and Size Reduction. Innovative Technology Summary Report

    SciTech Connect

    2001-09-01

    The project utilizes a Neodymium Yttrium Aluminum Garnet (Nd:YAG) laser to cut and size reduce equipment in the 324 Laboratory B Hot Cell located at Pacific Northwest National Laboratory. This project will demonstrate the ability of the Nd:Yag laser to remotely and safely dismantle equipment faster, cheaper, and more efficiently than baseline cutting methods, such as the plasma torch and the water knife, in a highly radioactive area using fiber optics.

  2. Design, fabrication and test of last cut Follower

    NASA Technical Reports Server (NTRS)

    Ashley, P. R.; Poulsen, P. D.

    1981-01-01

    An optical device for following the cut in mining operations is described, and the results of acceptance testing reported. A measuring accuracy of + or - 1/16 inch was demonstrated. Preliminary results on longwall testing with the device mounted on a shearer are presented. Roof profiles measured during tramming and during cutting are presented. Comparison of acoustic measurements with optical measurement of the roof profiles indicates close agreement.

  3. Small forest cuttings mapped with Landsat digital data

    NASA Technical Reports Server (NTRS)

    Bryant, E.; Dodge, A. G.; Eger, M. J. E.

    1979-01-01

    The Cooperative Landsat Applications Research Group used computer classification of Landsat digital data to map forest cuttings (clearcuts) in northern New Hampshire. Cuttings as small as 3 hectares were identified. Several ages or conditions of clearcuts could be distinguished. Progress in two methods of duplicating classification categories from one Landsat pass to another are discussed. One method was used in making maps of areas in 1973, 1975, and 1978.

  4. Laser cutting of thick steel sheets using supersonic oxygen jets

    SciTech Connect

    Zaitsev, A V; Kovalev, O B; Malikov, A G; Orishich, A M; Shulyat'ev, V B

    2007-09-30

    High-quality cutting of steel sheets of thickness up to 50 mm is performed upon a simultaneous action of laser radiation and a supersonic oxygen jet on the material. Parameters of the nozzle used for jet formation are determined by simulating numerically three-dimensional flows of a viscous and heat-conducting gas in a plane channel that is geometrically similar to the laser cut. (laser technologies)

  5. Unitarity cuts with massive propagators and algebraic expressions for coefficients

    SciTech Connect

    Britto, Ruth; Feng Bo

    2007-05-15

    In the first part of this paper, we extend the d-dimensional unitarity cut method of Anastasiou et al. to cases with massive propagators. We present formulas for integral reduction with which one can obtain coefficients of all pentagon, box, triangle and massive bubble integrals. In the second part of this paper, we present a detailed study of the phase space integration for unitarity cuts. We carry out spinor integration in generality and give algebraic expressions for coefficients, intended for automated evaluation.

  6. Underwater manifold centre-drilled cuttings disposal system

    SciTech Connect

    Biddlestone, P.A.

    1983-09-01

    During the construction of the Central Cormorant Underwater Manifold Centre (UMC), it was recognised that the cuttings produced during the drilling of template wells would interfere with UMC operations, if deposited on top of the structure. A dual system was developed and installed on the Stadrill (the unit planned to drill the wells) to remove the cuttings from the rig to the seabed away from the UMC.

  7. Cutting fluids. Their use and effects on the skin

    SciTech Connect

    Zugerman, C.

    1986-04-01

    Metalworking fluids are liquids that flow or are sprayed over metal that is being altered mechanically or physically. Cutting fluids tend to be alkaline and are often soap-like. As such they denature keratin, defat the skin, and remove water from it, causing dryness, fissures, and frank eczematization. Cutting oil dermatitis is a difficult problem for the involved worker who must continue to support his family despite the presence of this progressive, pruritic, and painful eruption. 25 references.

  8. Computerized Machine for Cutting Space Shuttle Thermal Tiles

    NASA Technical Reports Server (NTRS)

    Ramirez, Luis E.; Reuter, Lisa A.

    2009-01-01

    A report presents the concept of a machine aboard the space shuttle that would cut oversized thermal-tile blanks to precise sizes and shapes needed to replace tiles that were damaged or lost during ascent to orbit. The machine would include a computer-controlled jigsaw enclosed in a clear acrylic shell that would prevent escape of cutting debris. A vacuum motor would collect the debris into a reservoir and would hold a tile blank securely in place. A database stored in the computer would contain the unique shape and dimensions of every tile. Once a broken or missing tile was identified, its identification number would be entered into the computer, wherein the cutting pattern associated with that number would be retrieved from the database. A tile blank would be locked into a crib in the machine, the shell would be closed (proximity sensors would prevent activation of the machine while the shell was open), and a "cut" command would be sent from the computer. A blade would be moved around the crib like a plotter, cutting the tile to the required size and shape. Once the tile was cut, an astronaut would take a space walk for installation.

  9. Tailor cutting of crystalline solar cells by laser micro jet

    NASA Astrophysics Data System (ADS)

    Bruckert, F.; Pilat, E.; Piron, P.; Torres, P.; Carron, B.; Richerzhagen, B.; Pirot, M.; Monna, R.

    2012-03-01

    Coupling a laser into a hair thin water micro jet (Laser Micro Jet, LMJ) for cutting applications offers a wide range of processes that are quite unique. As the laser beam is guided by internal reflections inside of a liquid cylinder, the cuts are naturally straight and do not reflect any divergence as otherwise occurs with an unguided laser beam. Furthermore, having a liquid media at the point of contact ensures a fast removal of heat and eventual debris ensuring clean cuts, which are free of any burrs. Many applications have indeed been developed for a large variety of materials, which are as different as e.g. diamond, silicon, aluminum, ceramic and hard metals. The photovoltaic industry has enjoyed in the last decades tremendous growth rates, which are still projected into the future. We focus here on the segment of Building Integrated PV (BIPV), which requests tailored solutions to actual buildings and not-one-fits-it-all standardized modules. Having the option to tailor cut solar cells opens a new field of BIPV applications. For the first time, finished crystalline solar cells have been LMJ cut into predetermined shapes. First results show that the cut is clean and neat. Preliminary solar performance measurements are positive. This opens a new avenue of tailored made modules instead of having to rely on the one-fits-alloy approach used so far.

  10. Modeling and analysis of drag-bit cutting

    SciTech Connect

    Swenson, D.V.

    1983-07-01

    This report documents a finite-element analysis of drag-bit cutting using polycrystalline-diamond compact cutters. To verify the analysis capability, prototypic indention tests were performed on Berea sandstone specimens. Analysis of these tests, using measured material properties, predicted fairly well the experimentally observed fracture patterns and indention loads. The analysis of drag-bit cutting met with mixed success, being able to capture the major features of the cutting process, but not all the details. In particular, the analysis is sensitive to the assumed contact between the cutter and rock. Calculations of drag-bit cutting predict that typical vertical loads on the cutters are capable of forming fractures. Thus, indention-type loading may be one of the main fracture mechanisms during drag-bit cutting, not only the intuitive notion of contact between the front of the cutter and rock. The model also predicts a change in the cutting process from tensile fractures to shear failure when the rock is confined by in-situ stresses. Both of these results have implications for the design and testing of drag-bit cutters.

  11. Root dentine and endodontic instrumentation: cutting edge microscopic imaging.

    PubMed

    Atmeh, Amre R; Watson, Timothy F

    2016-06-01

    Cutting of the dental hard tissues is an integral part of restorative dentistry. Cutting of the root dentine is also needed in preparation prior to endodontic treatment, with significant commercial investment for the development of flexible cutting instruments based around nickel titanium (NiTi) alloys. This paper describes the evolution of endodontic cutting instruments, both in materials used, e.g. the transition from stainless steel to NiTi, and the design of the actual instruments themselves and their method of activation-by hand or motor driven. We have been examining tooth-cutting interactions microscopically for over 25 years using a variety of microscopic techniques; in particular, video-rate confocal microscopy. This has given a unique insight into how many of the procedures that we take for granted are achieved in clinical practice, by showing microscopic video images of the cutting as it occurs within the tooth. This technology has now been extended to allow imaging of the endodontic instrument and the root canal wall for the first time. We are able to image dentine distortion and crack propagation during endodontic filing of the root canal space. We are also able to visualize the often claimed, but seldom seen action of contemporary endodontic instruments. PMID:27274802

  12. Root dentine and endodontic instrumentation: cutting edge microscopic imaging.

    PubMed

    Atmeh, Amre R; Watson, Timothy F

    2016-06-01

    Cutting of the dental hard tissues is an integral part of restorative dentistry. Cutting of the root dentine is also needed in preparation prior to endodontic treatment, with significant commercial investment for the development of flexible cutting instruments based around nickel titanium (NiTi) alloys. This paper describes the evolution of endodontic cutting instruments, both in materials used, e.g. the transition from stainless steel to NiTi, and the design of the actual instruments themselves and their method of activation-by hand or motor driven. We have been examining tooth-cutting interactions microscopically for over 25 years using a variety of microscopic techniques; in particular, video-rate confocal microscopy. This has given a unique insight into how many of the procedures that we take for granted are achieved in clinical practice, by showing microscopic video images of the cutting as it occurs within the tooth. This technology has now been extended to allow imaging of the endodontic instrument and the root canal wall for the first time. We are able to image dentine distortion and crack propagation during endodontic filing of the root canal space. We are also able to visualize the often claimed, but seldom seen action of contemporary endodontic instruments.

  13. Design and use of plasma APC cutting equipment

    SciTech Connect

    Not Available

    1994-05-01

    This report discusses the use of the plasma arc cutting system in the decommissioning of the Sequoyah Fuels Corporation Plutonium Fuels Fabrication Facility (``The Cimarron Facility``), Crescent, Oklahoma. The system uses a plasma arc cutting torch modified for either manual or automatic operation and adaptable for use in either a normal glove box environment or in one which has been inerted to eliminate potential hazards of flammable or explosive materials. The program to decommission the Cimarron Facility will not be completed for several more years, but sufficient amount of work has been done with the plasma arc cutting system to allow the following conclusions to be drawn: (1) Major cost savings can be realized by the use of plasma arc cutting (rather than the more conventional mechanical methods) for the large amounts of thick stainless steel used for process equipment and glove boxes in a plutonium production facility. These savings are primarily due to the extremely rapid rate at which the plasma arc torch can cut the thick stainless steel. Experience to date has indicated a major reduction in operating man-hours by use of this equipment, even under the most difficult conditions of remote automatic operation in an inert atmosphere. (2) The speed of operation, and the fact that the cutting can be done in a ventilated glove box, markedly increases operator efficiency by eliminating the need for cumbersome protective clothing and decreases potential operator exposure to the hazards of plutonium contamination and gamma radiation.

  14. Self-contained pipe cutting shear. Innovative technology summary report

    SciTech Connect

    1998-11-01

    The US Department of Energy (DO) is in the process of decontaminating and decommissioning (D and D) many of its nuclear facilities throughout the country. Facilities have to be dismantled and demolition waste must be sized into manageable pieces for handling and disposal. Typically, the facilities undergoing D and D are contaminated, either chemically, radiologically, or both. In its D and D work, the DOE was in need of a tool capable of cutting steel and stainless steel pipe up to 6.4 cm in diameter. The self-contained pipe cutting shear was developed by Lukas Hydraulic GmbH and Co. KG to cut pipes up to 6.4 cm (2.5 in.) in diameter. This tool is a portable, hand-held hydraulic shear that is powered by a built-in rechargeable battery or a portable auxiliary rechargeable battery. Adding to its portability, it contains no hydraulic fluid lines or electrical cords, making it useful in congested areas or in areas with no power. Both curved and straight blades can be attached, making it adaptable to a variety of conditions. This tool is easy to set up, operates quietly, and cuts through pipes quickly. It is especially useful on contaminated pipes, as it crimps the ends while cutting and produces no residual cuttings. This shear is a valuable alternative to baseline technologies such as portable band saws, electric hacksaws, and other hydraulic shears. Costs using the innovative shear for cutting 2.5 cm (1-in.) pipe, for example, are comparable to costs using a conventional shear, approximately 80% of portable bandsaw costs and half of electric hacksaw costs.

  15. Picosecond laser cutting and drilling of thin flex glass

    NASA Astrophysics Data System (ADS)

    Wlodarczyk, Krystian L.; Brunton, Adam; Rumsby, Phil; Hand, Duncan P.

    2016-03-01

    We investigate the feasibility of cutting and drilling thin flex glass (TFG) substrates using a picosecond laser operating at wavelengths of 1030 nm, 515 nm and 343 nm. 50 μm and 100 μm thick AF32®Eco Thin Glass (Schott AG) sheets are used. The laser processing parameters such as the wavelength, pulse energy, pulse repetition frequency, scan speed and the number of laser passes which are necessary to perform through a cut or to drill a borehole in the TFG substrate are studied in detail. Our results show that the highest effective cutting speeds (220 mm/s for a 50 μm thick TFG substrate and 74 mm/s for a 100 μm thick TFG substrate) are obtained with the 1030 nm wavelength, whereas the 343 nm wavelength provides the best quality cuts. The 515 nm wavelength, meanwhile, can be used to provide relatively good laser cut quality with heat affected zones (HAZ) of <25 μm for 50 μm TFG and <40 μm for 100 μm TFG with cutting speeds of 100 mm/s and 28.5 mm/s, respectively. The 343 nm and 515 nm wavelengths can also be used for drilling micro-holes (with inlet diameters of ⩽75 μm) in the 100 μm TFG substrate with speeds of up to 2 holes per second (using 343 nm) and 8 holes per second (using 515 nm). Optical microscope and SEM images of the cuts and micro-holes are presented.

  16. Forecasts covering one month using a cut cell model

    NASA Astrophysics Data System (ADS)

    Steppeler, J.; Park, S.-H.; Dobler, A.

    2013-01-01

    This paper investigates the impact and potential use of the cut cell vertical discretisation for forecasts of 5 days and climate simulations. A first indication of the usefulness of this new method is obtained by a set of five-day forecasts, covering January 1989 by 6 forecasts. The model area was chosen to include much of Asia, the Himalayas and Australia. The cut cell model LMZ provides a much more accurate representation of mountains on model forecasts than the terrain following coordinate used for comparison. Therefore we are in particular interested in potential forecast improvements in the target area downwind of the Himalaya, over South East China, Korea and Japan. The LMZ has been tested so far extensively for one-day forecasts on an European area. Following indications of a reduced temperature error for the short forecasts, this paper investigates the model error for five days in an area influenced by strong orography. The forecasts indicated a strong impact of the cut cell discretisation on forecast quality. The cut cell model is available only of an older (2003) Version of the model LM. It was compared using a control model differing by the use of the terrain following coordinate only. The cut cell model improved the precipitation forecasts of this old control model everywhere by a large margin. An improved version of the terrain following model LM has been developed since then under the name CLM. The CLM has been used and tested in all climates, while the LM was used for small areas in higher latitudes. The precipitation forecasts of cut cell model were compared also to the CLM. As the cut cell model LMZ did not incorporate the developments for CLM since 2003, the precipitation forecast of the CLM was not improved in all aspects. However, for the target area downstream of the Himalaya, the cut cell model improved the prediction of the monthly precipitation forecast even in comparison with the modern model version CLM considerably. The cut cell

  17. Forecasts covering one month using a cut-cell model

    NASA Astrophysics Data System (ADS)

    Steppeler, J.; Park, S.-H.; Dobler, A.

    2013-07-01

    This paper investigates the impact and potential use of the cut-cell vertical discretisation for forecasts covering five days and climate simulations. A first indication of the usefulness of this new method is obtained by a set of five-day forecasts, covering January 1989 with six forecasts. The model area was chosen to include much of Asia, the Himalayas and Australia. The cut-cell model LMZ (Lokal Modell with z-coordinates) provides a much more accurate representation of mountains on model forecasts than the terrain-following coordinate used for comparison. Therefore we are in particular interested in potential forecast improvements in the target area downwind of the Himalayas, over southeastern China, Korea and Japan. The LMZ has previously been tested extensively for one-day forecasts on a European area. Following indications of a reduced temperature error for the short forecasts, this paper investigates the model error for five days in an area influenced by strong orography. The forecasts indicated a strong impact of the cut-cell discretisation on forecast quality. The cut-cell model is available only for an older (2003) version of the model LM (Lokal Modell). It was compared using a control model differing by the use of the terrain-following coordinate only. The cut-cell model improved the precipitation forecasts of this old control model everywhere by a large margin. An improved, more transferable version of the terrain-following model LM has been developed since then under the name CLM (Climate version of the Lokal Modell). The CLM has been used and tested in all climates, while the LM was used for small areas in higher latitudes. The precipitation forecasts of the cut-cell model were compared also to the CLM. As the cut-cell model LMZ did not incorporate the developments for CLM since 2003, the precipitation forecast of the CLM was not improved in all aspects. However, for the target area downstream of the Himalayas, the cut-cell model considerably

  18. Remote Fiber Laser Cutting System for Dismantling Glass Melter - 13071

    SciTech Connect

    Mitsui, Takashi; Miura, Noriaki; Oowaki, Katsura; Kawaguchi, Isao; Miura, Yasuhiko; Ino, Tooru

    2013-07-01

    Since 2008, the equipment for dismantling the used glass melter has been developed in High-level Liquid Waste (HLW) Vitrification Facility in the Japanese Rokkasho Reprocessing Plant (RRP). Due to the high radioactivity of the glass melter, the equipment requires a fully-remote operation in the vitrification cell. The remote fiber laser cutting system was adopted as one of the major pieces of equipment. An output power of fiber laser is typically higher than other types of laser and so can provide high-cutting performance. The fiber laser can cut thick stainless steel and Inconel, which are parts of the glass melter such as casings, electrodes and nozzles. As a result, it can make the whole of the dismantling work efficiently done for a shorter period. Various conditions of the cutting test have been evaluated in the process of developing the remote fiber cutting system. In addition, the expected remote operations of the power manipulator with the laser torch have been fully verified and optimized using 3D simulations. (authors)

  19. Nutrient analysis of the Beef Alternative Merchandising cuts.

    PubMed

    Desimone, T L; Acheson, R A; Woerner, D R; Engle, T E; Douglass, L W; Belk, K E

    2013-03-01

    The objective of this study was to generate raw and cooked nutrient composition data to identify Quality Grade differences in proximate values for eight Beef Alternative Merchandising (BAM) cuts. The data generated will be used to update the nutrient data in the USDA National Nutrient Database for Standard Reference (SR). Beef Rib, Oven-Prepared, Beef Loin, Strip Loin, and Beef Loin, Top Sirloin Butt subprimals were collected from a total of 24 carcasses from four packing plants. The carcasses were a combination of USDA Yield Grades 2 (n=12) and 3 (n=12), USDA Quality Grades upper two-thirds Choice (n=8), low Choice (n=8), and Select (n=8), and two genders, steer (n=16) and heifer (n=8). After aging, subprimals were fabricated into the BAM cuts, dissected, and nutrient analysis was performed. Sample homogenates from each animal were homogenized and composited for analysis of the following: proximate analysis, long chain and trans-fatty acids, conjugated linoleic acid, total cholesterol, vitamin B-12, and selenium. This study identified seven BAM cuts from all three Quality Grades that qualify for USDA Lean; seven Select cuts that qualify for USDA Extra Lean; and three Select cuts that qualify for the American Heart Association's Heart Healthy Check.

  20. Improved analytical model for residual stress prediction in orthogonal cutting

    NASA Astrophysics Data System (ADS)

    Qi, Zhaoxu; Li, Bin; Xiong, Liangshan

    2014-09-01

    The analytical model of residual stress in orthogonal cutting proposed by Jiann is an important tool for residual stress prediction in orthogonal cutting. In application of the model, a problem of low precision of the surface residual stress prediction is found. By theoretical analysis, several shortages of Jiann's model are picked out, including: inappropriate boundary conditions, unreasonable calculation method of thermal stress, ignorance of stress constraint and cyclic loading algorithm. These shortages may directly lead to the low precision of the surface residual stress prediction. To eliminate these shortages and make the prediction more accurate, an improved model is proposed. In this model, a new contact boundary condition between tool and workpiece is used to make it in accord with the real cutting process; an improved calculation method of thermal stress is adopted; a stress constraint is added according to the volumeconstancy of plastic deformation; and the accumulative effect of the stresses during cyclic loading is considered. At last, an experiment for measuring residual stress in cutting AISI 1045 steel is conducted. Also, Jiann's model and the improved model are simulated under the same conditions with cutting experiment. The comparisons show that the surface residual stresses predicted by the improved model is closer to the experimental results than the results predicted by Jiann's model.

  1. Development of Tool Edge Temperature Measurement Method in Wet Cutting

    NASA Astrophysics Data System (ADS)

    Nishimoto, Hideto; Tanaka, Ryutaro; Hosokawa, Akira; Ueda, Takashi; Furumoto, Tatsuaki

    In this paper, the measurement method of tool edge temperature using a two-color pyrometer with an optical fiber in wet cutting is proposed. Using the proposed method, the high pressure air supplied from the small hole where an optical fiber is inserted prevents coolant from adhering to the optical fiber edge and makes temperature measuring possible. The influence of this supplied air pressure on the tool edge temperature is negligible in the 0.05Mpa to 0.6MPa range. In this way, the temperature of CBN and PCD tool edge is measured in wet cutting of Ti-6Al-4V. As a result, the tool edge temperature increases rapidly with the increase of cutting speed. In dry cutting, PCD tool edge temperature is almost 100 °C lower compared with CBN tool edge temperature. By coolant supply, PCD tool edge temperature decreases greatly. For example, when cutting speed is set at 300m/min, PCD tool edge temperature decreases by 350°C, while CBN tool edge temperature decreases by only 70°C.

  2. The mode of inheritance in tetraploid cut roses.

    PubMed

    Koning-Boucoiran, C F S; Gitonga, V W; Yan, Z; Dolstra, O; van der Linden, C G; van der Schoot, J; Uenk, G E; Verlinden, K; Smulders, M J M; Krens, F A; Maliepaard, C

    2012-08-01

    Tetraploid hybrid tea roses (Rosa hybrida) represent most of the commercial cultivars of cut roses and form the basis for breeding programmes. Due to intensive interspecific hybridizations, modern cut roses are complex tetraploids for which the mode of inheritance is not exactly known. The segregation patterns of molecular markers in a tetraploid mapping population of 184 genotypes, an F(1) progeny from a cross of two heterozygous parents, were investigated for disomic and tetrasomic inheritance. The possible occurrence of double reduction was studied as well. We can exclude disomic inheritance, but while our observations are more in line with a tetrasomic inheritance, we cannot exclude that there is a mixture of both inheritance modes. Two novel parental tetraploid linkage maps were constructed using markers known from literature, combined with newly generated markers. Comparison with the integrated consensus diploid map (ICM) of Spiller et al. (Theor Appl Genet 122:489-500, 2010) allowed assigning numbers to each of the linkage groups of both maps and including small linkage groups. So far, the possibility of using marker-assisted selection in breeding of tetraploid cut roses and of other species with a tetrasomic or partly tetrasomic inheritance, is still limited due to the difficulties in establishing marker-trait associations. We used these tetraploid linkage maps to determine associations between markers, two morphological traits and powdery mildew resistance. The knowledge on inheritance and marker-trait associations in tetraploid cut roses will be of direct use to cut rose breeding.

  3. TransCut: interactive rendering of translucent cutouts.

    PubMed

    Li, Dongping; Sun, Xin; Ren, Zhong; Lin, Stephen; Tong, Yiying; Guo, Baining; Zhou, Kun

    2013-03-01

    We present TransCut, a technique for interactive rendering of translucent objects undergoing fracturing and cutting operations. As the object is fractured or cut open, the user can directly examine and intuitively understand the complex translucent interior, as well as edit material properties through painting on cross sections and recombining the broken pieces—all with immediate and realistic visual feedback. This new mode of interaction with translucent volumes is made possible with two technical contributions. The first is a novel solver for the diffusion equation (DE) over a tetrahedral mesh that produces high-quality results comparable to the state-of-art finite element method (FEM) of Arbree et al. but at substantially higher speeds. This accuracy and efficiency is obtained by computing the discrete divergences of the diffusion equation and constructing the DE matrix using analytic formulas derived for linear finite elements. The second contribution is a multiresolution algorithm to significantly accelerate our DE solver while adapting to the frequent changes in topological structure of dynamic objects. The entire multiresolution DE solver is highly parallel and easily implemented on the GPU. We believe TransCut provides a novel visual effect for heterogeneous translucent objects undergoing fracturing and cutting operations. PMID:23307612

  4. Displaying CFD Solution Parameters on Arbitrary Cut Planes

    NASA Technical Reports Server (NTRS)

    Pao, S. Paul

    2008-01-01

    USMC6 is a Fortran 90 computer program for post-processing in support of visualization of flows simulated by computational fluid dynamics (CFD). The name "USMC6" is partly an abbreviation of "TetrUSS - USM3D Solution Cutter," reflecting its origin as a post-processor for use with USM3D - a CFD program that is a component of the Tetrahedral Unstructured Software System and that solves the Navier-Stokes equations on tetrahedral unstructured grids. "Cutter" here refers to a capability to acquire and process solution data on (1) arbitrary planes that cut through grid volumes, or (2) user-selected spheroidal, conical, cylindrical, and/or prismatic domains cut from within grids. Cutting saves time by enabling concentration of post-processing and visualization efforts on smaller solution domains of interest. The user can select from among more than 40 flow functions. The cut planes can be trimmed to circular or rectangular shape. The user specifies cuts and functions in a free-format input file using simple and easy-to-remember keywords. The USMC6 command line is simple enough that the slicing process can readily be embedded in a shell script for assembly-line post-processing. The output of USMC6 is a data file ready for plotting.

  5. Cutting and drilling studies using high power visible lasers

    SciTech Connect

    Kautz, D.D.; Dragon, E.P.; Werve, M.E.; Hargrove, R.S.; Warner, B.E.

    1993-05-27

    High power and radiance laser technologies developed at Lawrence Livermore National Laboratory such as copper-vapor and dye lasers show great promise for material processing tasks. Evaluation of models suggests significant increases in welding, cutting, and drilling capabilities, as well as applications in emerging technologies such as micromachining, surface treatment, and stereolithography. Copper lasers currently operate at 1.8 kW output at approximately three times the diffraction limit and achieve mean time between failures of more than 1,000 hours. Dye lasers have near diffraction limited beam quality at greater than 1.0 kW. Results from cutting and drilling studies in titanium and stainless steel alloys show that cuts and holes with extremely fine features can be made with dye and copper-vapor lasers. High radiance beams produce low distortion and small heat-affected zones. The authors have accomplished very high aspect ratios (> 60:1) and features with micron scale (5-50 {mu}m) sizes. The paper gives a description of the equipment; discusses cutting theory; and gives experimental results of cutting and drilling studies on Ti-6Al-4V and 304 stainless steel.

  6. To cut... or not to cut (applications of comparative physical maps in molecular evolution)

    SciTech Connect

    Hannenhalli, S.; Pevzner, P.

    1996-12-31

    Studies of genomes evolving by rearrangements lead to cornbinatorial problem of sorting permutation by reversals. Kececioglu and Sankoff conjectured that for every permutation there exists an optimal sorting by reversals which does not cut long strips in the permutation. We prove this conjecture and further study the problem of sorting by reversals for permutations without strips of size one, called singletons. We give a polynomial algorithm for sorting such permutations, thus demonstrating that singletons present the major obstacle on the way towards an efficient algorithm for sorting by reversals. Using this result, we prove the strong Kecedoglu-Sankoff conjecture: for every permutation there exists an optimal sorting by reversals that never increases the number of breakpoints. Finally we present a new algorithm for sorting by reversals based on the notion of the spin of a permutation. For permutations with O(log n) singletons the algorithm runs in polynomial time and suggests a desired trade-off of resolution for cross-hybridization physical mapping in molecular evolution studies. We describe applications of this algorithm to analyze rearrangements in maize and green algae, in particular we find a most parsimonious rearrangement scenario for Chlamydomonas moewusii versus Chlamydomonas reinhardtii representing the most complicated known case of rearrangements in organelles.

  7. Hepta-cuts of two-loop scattering amplitudes

    NASA Astrophysics Data System (ADS)

    Badger, Simon; Frellesvig, Hjalte; Zhang, Yang

    2012-04-01

    We present a method for the computation of hepta-cuts of two loop scattering amplitudes. Four dimensional unitarity cuts are used to factorise the integrand onto the product of six tree-level amplitudes evaluated at complex momentum values. Using Gram matrix constraints we derive a general parameterisation of the integrand which can be computed using polynomial fitting techniques. The resulting expression is further reduced to master integrals using conventional integration by parts methods. We consider both planar and non-planar topologies for 2 → 2 scattering processes and apply the method to compute hepta-cut contributions to gluon-gluon scattering in Yang-Mills theory with adjoint fermions and scalars.

  8. Investigation of formation mechanisms of chips in orthogonal cutting process

    NASA Astrophysics Data System (ADS)

    Ma, W.

    2012-08-01

    This work investigates the formation mechanisms of chips in orthogonal cutting of mild steel and the transformation conditions between various morphology chips. It is supposed that the modeling material follows the Johnson-Cook constitutive model. In orthogonal cutting process, both the plastic flow and the instability behaviors of chip materials are caused by the plane strain loadings. Therefore, the general instability behaviors of materials in plane strain state are first analyzed with linear perturbation method and a universal instability criterion is established. Based on the analytical results, the formation mechanisms of chips and the transformation conditions between continuous and serrated chips are further studied by instability phase diagram method. The results show that the chip formation strongly depends on the intensity ratios between shear and normal stresses. The ratios of dissipative rates of plastic work done by compression and shear stresses govern the transformation from continuous to serrated chips. These results are verified by the numerical simulations on the orthogonal cutting process.

  9. Restriction enzyme cutting site distribution regularity for DNA looping technology.

    PubMed

    Shang, Ying; Zhang, Nan; Zhu, Pengyu; Luo, Yunbo; Huang, Kunlun; Tian, Wenying; Xu, Wentao

    2014-01-25

    The restriction enzyme cutting site distribution regularity and looping conditions were studied systematically. We obtained the restriction enzyme cutting site distributions of 13 commonly used restriction enzymes in 5 model organism genomes through two novel self-compiled software programs. All of the average distances between two adjacent restriction sites fell sharply with increasing statistic intervals, and most fragments were 0-499 bp. A shorter DNA fragment resulted in a lower looping rate, which was also directly proportional to the DNA concentration. When the length was more than 500 bp, the concentration did not affect the looping rate. Therefore, the best known fragment length was longer than 500 bp, and did not contain the restriction enzyme cutting sites which would be used for digestion. In order to make the looping efficiencies reach nearly 100%, 4-5 single cohesive end systems were recommended to digest the genome separately.

  10. The impact of cuts in legal aid funding on charities

    PubMed Central

    Morris, Debra; Barr, Warren

    2013-01-01

    This article focusses on the specific impact of the cuts in legal aid funding on the charitable sector. The sector plays a significant role in advice giving. Some charities have the provision of legal advice as their sole purpose, whilst the work of other charities includes the giving of legal advice. Funding comes via a number of sources including legal aid, local authorities and charitable trusts. Whilst this volume highlights the legal aid reforms that will lead to significant cuts in funding, this article notes that charitable providers of legal advice have also suffered major cuts from their other traditional funding sources. Against this background, the article considers the serious and often unforeseen consequences for charities of the legal aid reforms, which go far beyond the impact on the high street law firm and access to justice for claimants. PMID:23667296

  11. [Combined Probe for Determining Canal Filing Cutting Path].

    PubMed

    Ma, Ruyu; Ding, Hua; Gu, Jinan

    2015-10-01

    In order to help a surgeon to determine a proper canal filing cutting path in a hip replacement operation conveniently, this paper presents a kind of probe with combined structure. Firstly, the doctor can use this kind of combined probe to choose canal filing cutting path. Then, the doctor can use computer to guide the surgeon to file femoral cavity along the selected canal filing cutting path. Through hip replacement corpse experiments, filing effects and used time of using combined probe group and separate control group were analyzed. The experiment results showed that the methods introduced in this paper could lower the difficulty of hip replacement operations, improve the implantation of hip stem prostheses further, and reduce the incidence of surgical complications.

  12. Criptococosis cutánea primaria en paciente inmunocompetente.

    PubMed

    Osorio, Igor Vázquez; García-Rodiño, Sara; Rodríguez-Rodríguez, Marta; Labandeira, Javier; Suárez-Peñaranda, José Manuel; Sánchez-Aguilar, MDolores; Vázquez-Veiga, Hugo

    2016-01-01

    La criptococosis cutánea es una micosis propia de pacientes inmunodeprimidos, sobre todo aquellos con infección por el virusde la inmunodeficiencia humana (VIH). Sin embargo, existen casos infrecuentes de criptococosis cutánea en pacientes inmunocompetentes, que suelen simular otras dermatosis, lo que retrasa su diagnóstico y tratamiento. Presentamos el caso de un varón pluripatológico de 79 años, con úlceras dolorosas en dorso de mano derecha que no respondían a tratamientos tópicos. A través del estudio histopatológico y micológico se alcanzó el diagnóstico de criptococosis cutánea primaria, lográndose la remisión de las lesiones tras 6 meses de tratamiento con fluconazol. PMID:27617525

  13. New solids control system reduced oil on cuttings

    SciTech Connect

    Wilkinson, T.P.

    1996-04-08

    A new solids control system, consisting of four new shakers and a dryer in parallel all discharging into another dryer, significantly reduced the oil on the cuttings in a nine-well offshore drilling program. Cleaned, slurrified cuttings were then discharged overboard. In November 1994, Oiltools (Europe) Ltd. received contracts to upgrade the solids control systems on Sedco Forex`s Sedco 711 and Sovereign Explorer semisubmersible drilling vessels. Sedco Forex required systems that would meet the reduced oil-on-cuttings (OOC) disposal limit of less than 80 g/kg set by the operator, while staying efficient and economical to operate and maintain. In addition, all solids were required to be slurrified for pumping overboard to ensure dispersal away from the subsea center. This article highlights the equipment used and the savings realized on the Sovereign Explorer after the first three wells of a nine-well program.

  14. Mixed noble gas effect on cut green peppers

    NASA Astrophysics Data System (ADS)

    Raymond, L. V.; Zhang, M.; Karangwa, E.; Chesereka, M. J.

    2013-01-01

    Increasing attempts at using gas which leads to hydrate formation as a preservative tool in fresh-cut fruits and vegetables have been reported. In this study, changes in some physical and biochemical properties of fresh-cut green peppers under compressed noble gas treatments were examined. Mixed argonkrypton and argon treatments were performed before cold storage at 5°C for 15 days. Mass loss and cell membrane permeability were found to be the lowest in mixed argon-krypton samples. Besides, a lower CO2 concentration and vitamin C loss were detected in gastreated samples compared to untreated samples (control). While the total phenol degradation was moderately reduced, the effect of the treatment on polyphenoloxidase activity was better at the beginning of the storage period. The minimum changes in quality observed in cut peppers resulted from both mixed and gas treatment alone.

  15. Molecular organization of the cut locus of Drosophila melanogaster.

    PubMed

    Jack, J W

    1985-10-01

    Mutations of the cut locus (ct) of Drosophila can be divided into four groups based on their phenotypes and complementation patterns. Each group alters the phenotype of a different set of tissues. Two hundred kilobases of ct DNA, located in 7B1-2, have been cloned by chromosomal walking, and the cloned sequences have been used to analyze more than 40 mutants. Based on the location of transposable element mutations and the extent of deficiencies and an inversion, four cut locus regions can be defined. Mutations in each region affect the phenotype of a different set of tissues. The most centromere proximal region contains mutations that are null for cut locus function. Within individual regions, a higher level of organization can be detected. PMID:2996782

  16. Study on nanometric cutting of germanium by molecular dynamics simulation

    PubMed Central

    2013-01-01

    Three-dimensional molecular dynamics simulations are conducted to study the nanometric cutting of germanium. The phenomena of extrusion, ploughing, and stagnation region are observed from the material flow. The uncut thickness which is defined as the depth from bottom of the tool to the stagnation region is in proportion to the undeformed chip thickness on the scale of our simulation and is almost independent of the machined crystal plane. The cutting resistance on (111) face is greater than that on (010) face due to anisotropy of germanium. During nanometric cutting, both phase transformation from diamond cubic structure to β-Sn phase and direct amorphization of germanium occur. The machined surface presents amorphous structure. PMID:23289482

  17. Structure of supersymmetric sums in multiloop unitarity cuts

    SciTech Connect

    Bern, Z.; Carrasco, J. J. M.; Ita, H.; Johansson, H.; Roiban, R.

    2009-09-15

    In this paper we describe algebraic and diagrammatic methods related to the maximally helicity-violating generating function method for evaluating and exposing the structure of supersymmetric sums over the states crossing generalized unitarity cuts of multiloop amplitudes in four dimensions. We focus mainly on cuts of maximally supersymmetric Yang-Mills amplitudes. We provide various concrete examples, some of which are directly relevant for the calculation of four-loop amplitudes. Additionally, we discuss some cases with less-than-maximal supersymmetry. The results of these constructions carry over to generalized cuts of multiloop supergravity amplitudes through use of the Kawai-Lewellen-Tye relations between gravity and gauge-theory tree amplitudes.

  18. Criptococosis cutánea primaria en paciente inmunocompetente.

    PubMed

    Vázquez-Osorio, Igor; García-Rodiño, Sara; Rodríguez-Rodríguez, Marta; Labandeira, Javier; Suárez-Peñaranda, José Manuel; Sánchez-Aguilar, MDolores; Vázquez-Veiga, Hugo

    2016-05-15

    La criptococosis cutánea es una micosis propia de pacientes inmunodeprimidos, sobre todo aquellos con infección por el virusde la inmunodeficiencia humana (VIH). Sin embargo, existen casos infrecuentes de criptococosis cutánea en pacientes inmunocompetentes, que suelen simular otras dermatosis, lo que retrasa su diagnóstico y tratamiento. Presentamos el caso de un varón pluripatológico de 79 años, con úlceras dolorosas en dorso de mano derecha que no respondían a tratamientos tópicos. A través del estudio histopatológico y micológico se alcanzó el diagnóstico de criptococosis cutánea primaria, lográndose la remisión de las lesiones tras 6 meses de tratamiento con fluconazol.

  19. The use of cutting temperature to evaluate the machinability of titanium alloys.

    PubMed

    Kikuchi, Masafumi

    2009-02-01

    This study investigated the machinability of titanium, two commercial titanium alloys (Ti-6Al-4V and Ti-6Al-7Nb) and free-cutting brass using the cutting temperature. The cutting temperature was estimated by measuring the thermal electromotive force of the tool-workpiece thermocouple during cutting. The thermoelectric power of each metal relative to the tool had previously been determined. The metals were slotted using a milling machine and carbide square end mills under four cutting conditions. The cutting temperatures of Ti-6Al-4V and Ti-6Al-7Nb were significantly higher than that of the titanium, while that of the free-cutting brass was lower. This result coincided with the relationship of the magnitude of the cutting forces measured in a previous study. For each metal, the cutting temperature became higher when the depth of cut or the cutting speed and feed increased. The increase in the cutting speed and feed was more influential on the value than the increase in the depth of cut when two cutting conditions with the same removal rates were compared. The results demonstrated that cutting temperature measurement can be utilized to develop a new material for dental CAD/CAM applications and to optimize the cutting conditions.

  20. 7 CFR 319.74-2 - Conditions governing the entry of cut flowers.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 5 2013-01-01 2013-01-01 false Conditions governing the entry of cut flowers. 319.74... PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE FOREIGN QUARANTINE NOTICES Cut Flowers § 319.74-2 Conditions governing the entry of cut flowers. (a) Inspection. All cut flowers imported into...

  1. 7 CFR 319.74-2 - Conditions governing the entry of cut flowers.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 5 2014-01-01 2014-01-01 false Conditions governing the entry of cut flowers. 319.74... PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE FOREIGN QUARANTINE NOTICES Cut Flowers § 319.74-2 Conditions governing the entry of cut flowers. (a) Inspection. All cut flowers imported into...

  2. 7 CFR 319.74-2 - Conditions governing the entry of cut flowers.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 5 2012-01-01 2012-01-01 false Conditions governing the entry of cut flowers. 319.74... PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE FOREIGN QUARANTINE NOTICES Cut Flowers § 319.74-2 Conditions governing the entry of cut flowers. (a) Inspection. All cut flowers imported into...

  3. 7 CFR 319.74-2 - Conditions governing the entry of cut flowers.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 5 2010-01-01 2010-01-01 false Conditions governing the entry of cut flowers. 319.74... PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE FOREIGN QUARANTINE NOTICES Cut Flowers § 319.74-2 Conditions governing the entry of cut flowers. (a) Inspection. All cut flowers imported into...

  4. Cut Scores: Results May Vary. NBETPP Monographs, Volume 1, Number 1.

    ERIC Educational Resources Information Center

    Horn, Catherine; Ramos, Miguel; Blumer, Irwin; Madaus, George

    This paper discusses how cut scores are set and used and how accurately they reflect student achievement. Regardless of the method used, the cut-score setting process is subjective. The cut score is the point on a score scale that separates one performance standard from another. Cut scores may also be used to set performance levels for…

  5. A Preliminary Investigation of Three Compromise Methods for Establishing Cut-Off Scores.

    ERIC Educational Resources Information Center

    Mills, Craig N.; Melican, Gerald J.

    The study compares three methods for establishing cut-off scores that effect a compromise between absolute cut-offs based on item difficulty and relative cut-offs based on expected passing rates. Each method coordinates these two types of information differently. The Beuk method obtains judges' estimates of an absolute cut-off and an expected…

  6. 29 CFR 1915.53 - Welding, cutting and heating in way of preservative coatings.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 29 Labor 7 2013-07-01 2013-07-01 false Welding, cutting and heating in way of preservative... SHIPYARD EMPLOYMENT Welding, Cutting and Heating § 1915.53 Welding, cutting and heating in way of... and shipbulding and shall not apply to shipbreaking. (b) Before welding, cutting or heating...

  7. 29 CFR 1915.53 - Welding, cutting and heating in way of preservative coatings.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 29 Labor 7 2014-07-01 2014-07-01 false Welding, cutting and heating in way of preservative... SHIPYARD EMPLOYMENT Welding, Cutting and Heating § 1915.53 Welding, cutting and heating in way of... and shipbulding and shall not apply to shipbreaking. (b) Before welding, cutting or heating...

  8. 29 CFR 1926.354 - Welding, cutting, and heating in way of preservative coatings.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 29 Labor 8 2011-07-01 2011-07-01 false Welding, cutting, and heating in way of preservative... Welding and Cutting § 1926.354 Welding, cutting, and heating in way of preservative coatings. (a) Before welding, cutting, or heating is commenced on any surface covered by a preservative coating...

  9. 29 CFR 1915.53 - Welding, cutting and heating in way of preservative coatings.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 29 Labor 7 2011-07-01 2011-07-01 false Welding, cutting and heating in way of preservative... SHIPYARD EMPLOYMENT Welding, Cutting and Heating § 1915.53 Welding, cutting and heating in way of... and shipbulding and shall not apply to shipbreaking. (b) Before welding, cutting or heating...

  10. 29 CFR 1915.53 - Welding, cutting and heating in way of preservative coatings.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 29 Labor 7 2010-07-01 2010-07-01 false Welding, cutting and heating in way of preservative... SHIPYARD EMPLOYMENT Welding, Cutting and Heating § 1915.53 Welding, cutting and heating in way of... and shipbulding and shall not apply to shipbreaking. (b) Before welding, cutting or heating...

  11. 29 CFR 1926.354 - Welding, cutting, and heating in way of preservative coatings.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 29 Labor 8 2014-07-01 2014-07-01 false Welding, cutting, and heating in way of preservative... Welding and Cutting § 1926.354 Welding, cutting, and heating in way of preservative coatings. (a) Before welding, cutting, or heating is commenced on any surface covered by a preservative coating...

  12. 30 CFR 75.1106 - Welding, cutting, or soldering with arc or flame underground.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Welding, cutting, or soldering with arc or... Protection § 75.1106 Welding, cutting, or soldering with arc or flame underground. All welding, cutting, or... conducted in fireproof enclosures. Welding, cutting, or soldering with arc or flame in other than...

  13. 30 CFR 75.1106 - Welding, cutting, or soldering with arc or flame underground.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Welding, cutting, or soldering with arc or... Protection § 75.1106 Welding, cutting, or soldering with arc or flame underground. All welding, cutting, or... conducted in fireproof enclosures. Welding, cutting, or soldering with arc or flame in other than...

  14. 30 CFR 75.1106 - Welding, cutting, or soldering with arc or flame underground.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Welding, cutting, or soldering with arc or... Protection § 75.1106 Welding, cutting, or soldering with arc or flame underground. All welding, cutting, or... conducted in fireproof enclosures. Welding, cutting, or soldering with arc or flame in other than...

  15. 29 CFR 1926.354 - Welding, cutting, and heating in way of preservative coatings.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 29 Labor 8 2012-07-01 2012-07-01 false Welding, cutting, and heating in way of preservative... Welding and Cutting § 1926.354 Welding, cutting, and heating in way of preservative coatings. (a) Before welding, cutting, or heating is commenced on any surface covered by a preservative coating...

  16. 29 CFR 1915.53 - Welding, cutting and heating in way of preservative coatings.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 29 Labor 7 2012-07-01 2012-07-01 false Welding, cutting and heating in way of preservative... SHIPYARD EMPLOYMENT Welding, Cutting and Heating § 1915.53 Welding, cutting and heating in way of... and shipbulding and shall not apply to shipbreaking. (b) Before welding, cutting or heating...

  17. 29 CFR 1926.354 - Welding, cutting, and heating in way of preservative coatings.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 29 Labor 8 2010-07-01 2010-07-01 false Welding, cutting, and heating in way of preservative... Welding and Cutting § 1926.354 Welding, cutting, and heating in way of preservative coatings. (a) Before welding, cutting, or heating is commenced on any surface covered by a preservative coating...

  18. 30 CFR 75.1106 - Welding, cutting, or soldering with arc or flame underground.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Welding, cutting, or soldering with arc or... Protection § 75.1106 Welding, cutting, or soldering with arc or flame underground. All welding, cutting, or... conducted in fireproof enclosures. Welding, cutting, or soldering with arc or flame in other than...

  19. 29 CFR 1926.354 - Welding, cutting, and heating in way of preservative coatings.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 29 Labor 8 2013-07-01 2013-07-01 false Welding, cutting, and heating in way of preservative... Welding and Cutting § 1926.354 Welding, cutting, and heating in way of preservative coatings. (a) Before welding, cutting, or heating is commenced on any surface covered by a preservative coating...

  20. 30 CFR 75.1106 - Welding, cutting, or soldering with arc or flame underground.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Welding, cutting, or soldering with arc or... Protection § 75.1106 Welding, cutting, or soldering with arc or flame underground. All welding, cutting, or... conducted in fireproof enclosures. Welding, cutting, or soldering with arc or flame in other than...