Regeneration outlook on BLM lands in the Southern Oregon Cascades.

Treesearch

William I. Stein

1981-01-01

A survey of cutover timberland in the Butte Falls and Dead Indian areas showed that most partial cuts were moderately or well-stocked with natural regeneration. Clearcuts in the Butte Falls area were also well stocked, primarily with planted ponderosa pine; but many in the Dead Indian area were not. Advance regeneration was an important stocking component in partial...

The influence of partial cutting on mountain pine beetle-caused tree mortality in Black Hills ponderosa pine stands

Treesearch

J.M. Schmid; S.A. Mata; R.R. Kessler; J.B. Popp

2007-01-01

Ponderosa pine stands were partially cut to various stocking levels at five locations, periodically surveyed, and remeasured during the 20 years after installation. Mean diameter generally increased 2 inches over the 20-year period on most partially cut plots and less than 2 inches on unmanaged controls. Average diameter growth for diameter classes in partially cut...

Regeneration in mixed conifer and Douglas-fir shelterwood cuttings in the Cascade Range of Washington.

Treesearch

K.W. Seidel

1983-01-01

A survey of shelterwood cuttings in mixed conifer and Douglas-fir (Pseudotsuga menziesii (Mirb.) Franco) forests in the Cascade Range in Washington showed that, on the average, shelterwood units were adequately-stocked with a mixture of advance, natural postharvest, and planted reproduction of a number of species. Shelterwood cuttings in the...

7 CFR 301.75-6 - Interstate movement of regulated nursery stock from a quarantined area.

Code of Federal Regulations, 2014 CFR

2014-01-01

... the plants are not grown from seed, then the cuttings used for propagation of the plants are taken... kumquat plants for interstate movement under the requirements of this paragraph (b). Cuttings may not be... cuttings from a nursery that is eligible to produce kumquat plants for interstate movement under this...

CORY: A Computer Program for Determining Dimension Stock Yields

Treesearch

Charles C Brunner; Marshall S. White; Fred M. Lamb; James G. Schroeder

1989-01-01

CORY is a computer program that calculates random-width, fixed-length cutting yields and best sawing sequences for either rip- or crosscut-first operations. It differs from other yield calculating programs by evaluating competing cuttings through conflict resolution models. Comparisons with Program YIELD resulted in a 9 percent greater cutting volume and a 98 percent...

7 CFR 301.75-6 - Interstate movement of regulated nursery stock from a quarantined area.

Code of Federal Regulations, 2011 CFR

2011-01-01

... they will be moved interstate. (3) If the plants are not grown from seed, then the cuttings used for... paragraph (b). Cuttings may not be obtained from properties where citrus canker is present. (4) All citrus... completed, the nursery may receive new kumquat seed or cuttings from a nursery that is eligible to produce...

75 FR 51140 - Self-Regulatory Organizations; Notice of Filing and Immediate Effectiveness of a Proposed Rule...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-18

... NASDAQ Stock Market LLC To Amend Exchange Rules Related to the Cut-off Time for Contrary Exercise Advice... Options Contracts) to make changes to extend the cut-off time to submit contrary exercise advices... Chapter VIII, Section 1 to extend the cut-off time to submit Contrary Exercise Advices to the Exchange; to...

Regeneration Development Across a Range of Reproduction Cutting Methods in Shortleaf Pine and Pine-Hardwood Stands in the Interior Highlands

Treesearch

James M. Guldin; James B. Baker; Michael G. Shelton

2004-01-01

Abstract - Density, milacre stocking, and height of shortleaf pine ( Pinus echinata Mill.) regeneration under 13 reproduction cutting methods were measured after 5 growing seasons across a range of reproduction cutting treatments in shortleaf pine and pine-hardwood stands in the Interior Highlands of Arkansas and Oklahoma. A subset...

Methods of cutting ponderosa pine in the Southwest - Establishment report: Even-aged yield study, Plot 11

Treesearch

Gilbert H. Schubert

1963-01-01

The objectie of the study is to obtain information on the growth and yield of even-aged stands of different stocking levels. The plot will also serve as the start of a detailed growing stock study for the ponderosa pine region.

Overstory removal: stand factors related to success and failure

Treesearch

Robert J. Laacke; Gary O. Fiddler

1986-01-01

Overstory removal can offer economic and esthetic advantages over clearcutting and regeneration, but projecting success is difficult. Twenty-nine units on nine operational overstory removal cuts in northern California were studied to determine what factors are related to satisfactory or unsatisfactory stocking after harvest. Stocking determinations were based on number...

Ten-Year Performance of Eastern White Pine - under a Crop Tree Release Regime on an Outwash Site

Treesearch

Kenneth M. Desmarais; William B. Leak; William B. Leak

2005-01-01

A young stand of eastern white pine aged 38-40 years received a crop tree release cutting reducing stocking to 100 tree/ac. This stocking level reflects the number of sterms per acre that would be contained in a well stocked mature stand at final harvest (20-in. quadratic mean stand diameter). The stand then was monitored for growth and value change. Stems that grew...

The effect of advance growth on ponderosa pine seedling mortality at Challenge Experimental Forest

Treesearch

Dale O. Hall

1963-01-01

In seed-tree cuttings at Challenge Experimental Forest, preliminary data show that as advance-growth stocking (20 inches in d.b.h. or less ) increased from 11 t o 49 square feet, seedling mortality increased from 4 to 32 percent (based on stocked mil-acre plots). A comparable increase in the stocking of seed trees over 20 inches in d .b.h. did not increase mortality....

Residual stocking not seriously reduced by logging damage from thinning of West Virginia cherry-maple stands

Treesearch

Neil I. Lamson; H. Clay Smith; Gary W. Miller

1984-01-01

In north-central West Virginia, unmanaged 60-year-old cherry-maple stands were thinned to 75, 60, and 45 percent residual stocking. Cut trees were skidded tree length by a rubber-tired skidder. Logging destroyed or severely bent over 22, 23, and 45 percent of the unmarked stems in the 75, 60, and 45 percent stocked plots. Because 99 percent of the destroyed and bent...

Who continues to stock oral artemisinin monotherapy? Results of a provider survey in Myanmar.

PubMed

Thein, Si Thu; Sudhinaraset, May; Khin, Hnin Su Su; McFarland, Willi; Aung, Tin

2016-06-22

Artemisinin-based combination therapy (ACT) is a key strategy for global malaria elimination efforts. However, the development of artemisinin-resistant malaria parasites threatens progress and continued usage of oral artemisinin monotherapies (AMT) predisposes the selection of drug resistant strains. This is particularly a problem along the Myanmar/Thailand border. The artemisinin monotherapy replacement programme (AMTR) was established in 2012 to remove oral AMT from stocks in Myanmar, specifically by replacing oral AMT with quality-assured ACT and conducting behavioural change communication activities to the outlets dispensing anti-malarial medications. This study attempts to quantify the characteristics of outlet providers who continue to stock oral AMT despite these concerted efforts. A cross-sectional survey of all types of private sector outlets that were stocking anti-malarial drugs in 13 townships of Eastern Myanmar was implemented from July to August 2014. A total of 573 outlets were included. Bivariate and multivariable logistic regressions were conducted to assess outlet and provider-level characteristics associated with stocking oral AMT. In total, 2939 outlets in Eastern Myanmar were screened for presence of any anti-malarial drugs in August 2014. The study found that 573 (19.5 %) had some kind of oral anti-malarial drug in stock at the time of survey and among them, 96 (16.8 %) stocked oral AMT. In bivariate analyses, compared to health care facilities, itinerant drug vendors, retailers and health workers were less likely to stock oral AMT (33.3 vs 12.9, 10.0, 8.1 %, OR = 0.30, 0.22, 0.18, respectively). Providers who cut blister pack or sell partial courses (40.6 vs 11.7 %, OR 5.18, CI 3.18-8.44) and those who based their stock decision on consumer demand (32.8 vs 12.1 %, OR 3.54, CI 2.21-5.63) were more likely to stock oAMT. Multivariate logistic regressions produced similar significant associations. Private healthcare facilities and drug shops and providers who prioritize consumers' demand instead of recommended practices were more likely to stock oral AMT. Malaria elimination strategies should include targeted interventions to effectively reach those outlets.

Mamdani-Fuzzy Modeling Approach for Quality Prediction of Non-Linear Laser Lathing Process

NASA Astrophysics Data System (ADS)

Sivaraos; Khalim, A. Z.; Salleh, M. S.; Sivakumar, D.; Kadirgama, K.

2018-03-01

Lathing is a process to fashioning stock materials into desired cylindrical shapes which usually performed by traditional lathe machine. But, the recent rapid advancements in engineering materials and precision demand gives a great challenge to the traditional method. The main drawback of conventional lathe is its mechanical contact which brings to the undesirable tool wear, heat affected zone, finishing, and dimensional accuracy especially taper quality in machining of stock with high length to diameter ratio. Therefore, a novel approach has been devised to investigate in transforming a 2D flatbed CO2 laser cutting machine into 3D laser lathing capability as an alternative solution. Three significant design parameters were selected for this experiment, namely cutting speed, spinning speed, and depth of cut. Total of 24 experiments were performed with eight (8) sequential runs where they were then replicated three (3) times. The experimental results were then used to establish Mamdani - Fuzzy predictive model where it yields the accuracy of more than 95%. Thus, the proposed Mamdani - Fuzzy modelling approach is found very much suitable and practical for quality prediction of non-linear laser lathing process for cylindrical stocks of 10mm diameter.

7 CFR 319.37-1 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... field-grown florist's stock, trees, shrubs, vines, cuttings, grafts, scions, buds, fruit pits, and other seeds of fruit and ornamental trees or shrubs, and other plants and plant products for propagation..., including a tree, a tissue culture, a plantlet culture, pollen, a shrub, a vine, a cutting, a graft, a scion...

Regeneration in United States Department of Agriculture Forest Service mixed conifer partial cuttings in the Blue Mountains of Oregon and Washington.

Treesearch

K.W. Seidel; S. Conrade. Head

1983-01-01

A survey in the Blue Mountains of north-eastern Oregon and southeastern Washington showed that, on the average, partial cuts in the grand fir/big huckleberry community were well stocked with a mixture of advance, natural post-harvest, and planted reproduction of a number of species. Partial cuts in the mixed conifer/pinegrass community had considerably fewer seedlings...

Methanol production from Eucalyptus wood chips. Working Document 2. Vegetative propagation of Eucalypts

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fishkind, H.H.

1982-04-01

The feasibility of large-scale plantation establishment by various methods was examined, and the following conclusions were reached: seedling plantations are limited in potential yield due to genetic variation among the planting stock and often inadequate supplies of appropriate seed; vegetative propagation by rooted cuttings can provide good genetic uniformity of select hybrid planting stock; however, large-scale production requires establishment and maintenance of extensive cutting orchards. The collection of shoots and preparation of cuttings, although successfully implemented in the Congo and Brazil, would not be economically feasible in Florida for large-scale plantations; tissue culture propagation of select hybrid eucalypts offers themore » only opportunity to produce the very large number of trees required to establish the energy plantation. The cost of tissue culture propagation, although higher than seedling production, is more than off-set by the increased productivity of vegetative plantations established from select hybrid Eucalyptus.« less

Predicting stocking improvement in reproduction stands of Douglas-fir.

Treesearch

George R. Staebler

1948-01-01

Some cut or burned-over Douglas-fir areas restocked promptly and fully. Others do not and seemingly never will restock adequately without the help of artificial seeding or planting. On some areas widely scattered seedlings become established and grow; filling-in is by second generation trees from the seed of these scattered parents. On still other areas stocking...

Stock room, just off the large first floor machine ship. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Stock room, just off the large first floor machine ship. Here were stored various cutting edges and drill bits used on the machines. Some raw materials were stored here as well, along with nuts and bolts, machine screws, etc. - Thomas A. Edison Laboratories, Building No. 5, Main Street & Lakeside Avenue, West Orange, Essex County, NJ

An evaluation of uneven-aged cutting methods in even-aged oak-hickory stands in the Boston mountains of Arkansas

Treesearch

David L. Graney; Paul A. Murphy

1997-01-01

A test of group-selection and single-tree selection cutting methods was installed in 80-year-old even-aged oak-hickory stands in the Boston Mountains of northern Arkansas. Twenty-four 11-ac study plots were installed in well stocked stands representing north or east and south or west aspects. Stands between group openings were cut to residual basal areas of 65 and 85...

77 FR 71023 - Self-Regulatory Organizations; New York Stock Exchange LLC; Notice of Filing and Immediate...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-28

... Acceptance Cut-Off Time Cannot Be Past 4:30 p.m. November 21, 2012. Pursuant to Section 19(b)(1) of the... that the order acceptance cut-off time cannot be past 4:30 p.m. The text of the proposed rule change is... order acceptance cut-off time cannot be past 4:30 p.m. (or 30 minutes after the scheduled close in the...

Selective cutting, rehabilitation, and alternatives for forests of northeastern North America and elsewhere

Treesearch

Laura S. Kenefic

2014-01-01

In the 1928 Journal of Forestry, Marinus Westveld commented that logging in the Northeast dating to the mid-1800s had been selective cutting that removed desirable species of large sizes. Later, commercial clearcuts removed progressively smaller trees of merchantable quality and desirable species. Indiscriminate logging damaged young growing stock...

Operational rooted cuttings in southern pines

Treesearch

Joe Weber; Hank Stelzer

2002-01-01

Use of rooted cuttings for planting of pine trees has become increasingly popular. Vegetative propagation can deliver planting stock of higher genetic quality, increasing productivity and shortening rotations. Clonal forestry can also provide stands of higher uniformity, which can reduce logging and processing cost and yield a much more uniform product. One of the...

Long-term influence of alternative forest management treatments on total ecosystem and wood product carbon storage

Treesearch

Joshua J. Puhlick; Aaron R. Weiskittel; Ivan J. Fernandez; Shawn Fraver; Laura S. Kenefic; Robert S. Seymour; Randall K. Kolka; Lindsey E. Rustad; John C. Brissette

2016-01-01

Developing strategies for reducing atmospheric CO2 is one of the foremost challenges facing natural resource professionals today. The goal of this study was to evaluate total ecosystem and harvested wood product carbon (C) stocks among alternative forest management treatments (selection cutting, shelterwood cutting, commercial clearcutting, and...

Stock size affects early growth of a loblolly pine

Treesearch

David B. South; Al Lyons; Russ Pohl

2015-01-01

For decades, forest researchers in the South have known that early gains in survival and growth of loblolly pine (Pinus taeda L.) can be achieved by planting large-diameter seedlings (South 1993; Wakeley 1949). For P. radiata, increasing size of planting stock also increases early growth of both seedlings (Mason and others 1996) and cuttings (South and others 2005)....

Combinatorial Algorithms for Portfolio Optimization Problems - Case of Risk Moderate Investor

NASA Astrophysics Data System (ADS)

Juarna, A.

2017-03-01

Portfolio optimization problem is a problem of finding optimal combination of n stocks from N ≥ n available stocks that gives maximal aggregate return and minimal aggregate risk. In this paper given N = 43 from the IDX (Indonesia Stock Exchange) group of the 45 most-traded stocks, known as the LQ45, with p = 24 data of monthly returns for each stock, spanned over interval 2013-2014. This problem actually is a combinatorial one where its algorithm is constructed based on two considerations: risk moderate type of investor and maximum allowed correlation coefficient between every two eligible stocks. The main outputs resulted from implementation of the algorithms is a multiple curve of three portfolio’s attributes, e.g. the size, the ratio of return to risk, and the percentage of negative correlation coefficient for every two chosen stocks, as function of maximum allowed correlation coefficient between each two stocks. The output curve shows that the portfolio contains three stocks with ratio of return to risk at 14.57 if the maximum allowed correlation coefficient between every two eligible stocks is negative and contains 19 stocks with maximum allowed correlation coefficient 0.17 to get maximum ratio of return to risk at 25.48.

Influence of edging practices on cutting yields of Alaska birch lumber

Treesearch

David L. Nicholls; J.W. Funck; C.C. Brunner; J.E. Reeb

2009-01-01

Birch lumber is often characterized by a high degree of knots, bark pockets, heartwood, and other features which force sawmill owners to decide whether to edge and trim boards to produce standard grade lumber vs. proprietary grade character-marked lumber. In addition, the edging strategies used with irregularly shaped flitches can greatly influence cut-stock recovery....

Survival and growth of planted yellow-cedar seedlings and rooted cuttings (stecklings) near Ketchikan, Alaska

Treesearch

Paul E. Hennon; Michael H. McClellan; Sheila R. Spores; Ewa H. Orlikowska

2009-01-01

The survival and growth of yellow-cedar (Chamaecyparis nootkatensis) seedlings and rooted cuttings (stecklings) were monitored for 6 years after planting at three sites near Ketchikan in southeast Alaska to determine whether stecklings could serve as a suitable planting stock. Survival for both seedlings and stecklings was >85% at the three...

Genetic structure and diversity of Japanese kokanee Oncorhynchus nerka stocks as revealed by microsatellite and mitochondrial DNA markers.

PubMed

Yamamoto, S; Kitamura, S; Sakano, H; Morita, K

2011-11-01

Genetic structure and diversity of nine Japanese kokanee (landlocked) Oncorhynchus nerka stocks and anadromous O. nerka from the North Pacific and the Canadian Lake Cultus population were examined using microsatellite and mitochondrial DNA. Sequence analyses of the cytochrome b region of mtDNA for Japanese kokanee O. nerka stocks on Honshu and Hokkaido islands revealed that most Japanese stocks were monomorphic of one major haplotype, which was also dominant in the Lake Cultus population and anadromous O. nerka in the North Pacific. Assignment tests using microsatellite DNA revealed that there was no clear-cut population structure in Japanese kokanee O. nerka stocks. © 2011 The Authors. Journal of Fish Biology © 2011 The Fisheries Society of the British Isles.

Results of small woodlot cuttings on Penobscot Experimental Forest, 1953 and 1954

Treesearch

Arthur C. Hart

1956-01-01

In 1951 foresters at the Penobscot Experimental Forest near Bangor, Maine, began a demonstration of the financial returns that can be realized through careful management of small forest properties. Light improvement cuts made in 1951 and 1952 on a moderately stocked 47-acre tract (Compartment 2) yielded gross incomes of $623.74 and $191.81 respectively. Another well-...

Uneven-aged management of old-growth spruce-fir forests: Cutting methods and stand structure goals for the initial entry

Treesearch

Robert R. Alexander; Carleton B. Edminster

1977-01-01

Topics discussed include: (1) cutting methods, (2) stand structure goals, which involve choosing a residual stocking level, selecting a maximum tree size, and establishing a diameter distribution using the "q" technique, and (3) harvesting and removal of trees. Examples illustrate how to determine realistic stand structures for the initial entry for...

Regeneration in mixed conifer shelterwood cuttings in the Cascade Range of eastern Oregon.

Treesearch

K.W. Seidel

1979-01-01

A survey of shelterwood cuttings in mixed conifer forests in the eastern Oregon Cascade Range showed that, on the average, shelterwood units were well stocked with a mixture of advance, natural subsequent, and planted reproduction of a number of species. Because of slow invasion by understory vegetation, frequent heavy seed crops, and adequate density of the overstory...

Longer black willow cuttings result in better initial height and diameter growth in biomass plantations

Treesearch

Jake C. Camp; Randall J. Rousseau; Emile S. Gardiner

2012-01-01

Black willow (Salix nigra Marsh.) has the potential to be a viable plantation species for biomass production on heavy clay soils throughout the southern United States. The most favorable planting stock for woody biomass plantations is dormant unrooted cuttings, because they are easy to plant and use of clonal material allows for advancing genetic...

Evaluating hybrid poplar rooting. I. genotype x environment interactions in three contrasting sites

Treesearch

Ronald S., Jr. Zalesny; Don E. Riemenschneider; Richard B. Hall

2002-01-01

We need to learn more about environmental conditions that promote or hinder rooting of unrooted dormant hybrid poplar cuttings. Planting cuttings and recording survival after the growing season is not suitable to keep up with industrial demands for improved stock. This method does not provide information about specific genotype x environment interactions. We know very...

Performance of Slash Pine Bare-Root Seedlings and Containerized Rooted Cuttings Planted on Five Dates in Louisiana

Treesearch

Alper Akgul; Michael G. Messina; Alan Wilson; Joe Weber

2004-01-01

Landowners are interested in extending the normal planting season, as well as the comparative field performance, of nursery bare-root seedlings and containerized rooted cuttings. The effect of seasonal planting dates on field performance of two stock types of slash pine (Pinus elliottii Engelm.) was examined. Slash pine bare-root seedlings (BRS) and...

Logging damage associated with thinning central Appalachian hardwood stands with a wheeled skidder

Treesearch

Gary W. Miller; Neil I. Lamson; Samuel M. Brock

1984-01-01

In north central West Virginia, unmanaged 53-year-old, mixed oak-cove hardwood stands were thinned to 75, 60, and 45 percent residual stocking. Cut trees were skidded tree-length with a rubber-tired skidder. Logging destroyed or severely bent 26, 29, and 34 percent of the unmarked stems in the 75, 60, and 45 percent stocking plots, respectively. Because 94 percent of...

Logging damage to dominant and codominant residual stems in thinned West Virginia cherry-maple stands

Treesearch

Neil I. Lamson; Gary W. Miller

1982-01-01

Previously unmanaged 60-year-old, even-aged stands of cherry-maple in West Virginia were thinned using the Allegheny hardwoods stocking guide. A marked cut was computed for 75, 60, and 45 percent of full stocking; no trees smaller than 17.8. cm dbh were marked for commercial removal. Thinning was done with either a truck-mounted crane or a rubber-tired skidder.

Effects of Forged Stock and Pure Aluminum Coating on Cryogenic Performance of Heat Treated Aluminum Mirrors

NASA Technical Reports Server (NTRS)

Toland, Ronald W.; Ohl, Raymond G.; Barthelmy, Michael P.; Zewari, S. Wahid; Greenhouse, Matthew A.; MacKenty, John W.

2003-01-01

We present the results of an on-going test program designed to empirically determine the effects of different stress relief procedures for aluminum mirrors. Earlier test results identified a preferred heat treatment for flat and spherical mirrors diamond turned from blanks cut out of Al 6061-T651 plate stock. Further tests have been performed on mirrors from forged stock and one set from plate stock coated with Alumiplate(trademark) aluminum coating to measure the effect of these variables on cryogenic performance. The mirrors are tested for figure error and radius of curvature at room temperature and at 80 K for three thermal cycles. We correlate the results of our optical testing with heat treatment and metallographic data.

Requirements for advance reproduction in Allegheny hardwoods - an interim guide

Treesearch

Ted J. Grisez; Maurice R. Peace

1973-01-01

Reproduction tallies on 65 areas planned for clearcutting were compared with reproduction 2 to 4 years after cutting. As a result, we recommend that 70 percent of the area be stocked with at least 5,000 black cherry seedlings or 30,000 seedlings per acre of desirable species before cutting. If this requirement had been used on these 65 areas, the proportion of...

Modeling and simulating two cut-to-length harvesting systems in central Appalachian hardwoods

Treesearch

Jingxin Wang; Chris B. LeDoux; Yaoxiang Li

2003-01-01

The production rates and costs of two cut-to-length harvesting systems was simulated using a modular ground-based simulation model and stand yield data from fully stocked, second growth even aged central Appalachian hardwood forests. The two harvesters simulated were a modified John Deere 988 tracked excavator with a model RP 1600 single grip sawhead and an excavator...

The role of the implementation angle of cuttings of Phyllanthus sellowianus as a reference for a soil protection measure against surface erosion

NASA Astrophysics Data System (ADS)

Rauch, H. P.; Sutili, F. J.; Aschbacher, M.; Müller, B.

2009-04-01

Cutting plantation is a very common method of soil bioengineering techniques. The potential of vegetative reproduction is used to install a vegetation cover on eroded slopes to prevent surface erosion. The development of above and below biomass from parts of the stock plant in a very short time and the fast and easy propagation are one of the most important advantages of this soil bioengineering type. Several handbooks (Schiechtl, 1992; Florineth, 2004 and Zeh, 2007) suggest potential plants for vegetative reproduction and describe the procedure of plantation in detail. It is recommended that the cuttings are not driven vertically into the ground. A flat implementation angle guarantees a more uniform rooting of the cutting part driven into the soil, however there are no systematically investigations of the impact of the implementation angle on the biomass performance and consequently on the performance as a surface erosion protection measure. This paper shows results from field investigations focusing on the problem of the impact of the implementation angle of cuttings. In sum 75 specimens of the species of Phyllanthus sellowianus. The plant species was recommended as a native potential soil bioengineering plant by Sutili (s. Sutili, 2006). The cuttings were planted with an average length of 50 cm and diameter of 2 cm. The implementation angle differences between 90 (vertical) 45 and 10 degree. Two months after plantation all plants were excavated and the relevant plant data sets were collected in order to analyse the biomass performance. The field investigations are part of an integrated research project of the University of Natural Resources and Applied Life Sciences, Vienna and the Federal University of Santa Maria, Rio Grande do Sul - Brazil.

Logging damage to residual trees following commercial harvesting to different overstory retention levels in a mature hardwood stand in Tennessee

Treesearch

Wayne K. Clatterbuck

2006-01-01

Partial cutting in mature hardwood stands often causes physical damage to residual stems through felling and skidding resulting in a decline in bole quality and subsequent loss of tree value. This study assessed the logging damage to residual trees following commercial harvesting in a fully stocked, mature oak-hickory stand cut to three overstory basal area retention...

The case of the downsizing decision.

PubMed

Train, A S

1991-01-01

New CEO Charles Rampart's decision to make deep across-the-board cuts at Universal Products Company, Ltd. presents division manager Andrew Jordan with a thorny problem. Plagued by slow growth, a declining stock price, and an increasingly skeptical investment community, UPC needs to control costs and control them fast. But Jordan's division is the most profitable in the company, and the 11% cut proposed by Rampart could destroy already shaky morale and seriously threaten the division's ability to compete. "There comes a time in every manager's career when he has to fight a bad decision made by his boss," argues Sam Godwyn, Jordan's vice president for marketing and sales. "To cut across the board is to take a blunt axe to the company when a surgeon's scalpel is called for." He suggests it is better to line up support for an alternative plan that links cuts to a long-term strategy and that differentiates between successful and unsuccessful divisions. "It would be a terrible mistake for us to focus only on the narrow needs of the division when the future of the whole company is at stake," counters Mary Wyatt, Jordan's vice president for finance. Yes, the downsizing will hurt the division in the short term, but the real issue is getting behind the new CEO. Supporting the downsizing decision is a necessary investment in this future credibility and effectiveness--whatever the short-term costs. Four commentators debate Jordan's dilemma and how he should resolve it.

Long-term CO2 flux dynamics and soil C stock changes of a drained fen mire under different grassland management practices in Northeast Germany

NASA Astrophysics Data System (ADS)

Augustin, Juergen; Giebels, Michael; Albiac Borraz, Elisa; Hoffmann, Mathias; Sommer, Michael

2014-05-01

Fen mires, widely distributed in Germany and Northern Europe, contain extreme high amounts of carbon (up to 5000 t C per hectare). For this reason, they play an important role in the global cycle of the greenhouse gases carbon dioxide (CO2) and methane (CH4). Currently more than 95% of all fen mires in central Europe are drained. Therefore, they are assumed to represent extremely strong sources for CO2,accompanied by a fast reduction of the peat carbon stocks. For a number of reasons it is not possible to overcome this problem by restoration measures like flooding at the most drained fen sites. Moreover, there are till now just few and contradictory information about the contribution of alternative land use forms like grassland extensification on the reduction of the CO2 source function of these organic soils. As a contribution to clearing this deficit, we have ongoingly measured the CO2 and CH4 exchange as well as the changes in C stock on a deeply drained fen mire near the village of Paulinenaue from 2007 till 2012. The measurement sites is located within the so-called Rhin-Havelluch, an 80000 ha shallow paludification mire complex in the northwest of Berlin. The investigation included extensively and intensively used meadows (one cut vs. three cuts) on two soil types with different C stocks (Hemic Rheic Histosol vs. Mollic Gleysol). We used transparent chambers for measuring the CO2 flux net ecosystem exchange (difference between gross primary production and ecosystem respiration) and non-transparent chambers for measuring the CO2 flux ecosystem respiration and the CH4 exchange. Determined soil stock changes based on a C budget approach, including cumulated annual net ecosystem exchange, cumulated CH4 exchange, C export by harvest, and C import by fertilization. All current C fluxes were influenced in a complex way by ground-water level, plant development, land use intensity (cut frequency) and current weather conditions. Averaged over the whole investigation time all combinations of land use intensity and soil types acted as strong CO2 sources and showed high soil C losses (up to 1070 g C m-2 yr-1). There was a tendency of lower soil C losses in case of extensive grassland compared to intensive grassland use (820 vs. 1070 g C m-2 yr-1) and grassland at the Gleysol site compared to the Histosol site (538 vs. 946 g C m-2 yr-1). However, the cumulated C fluxes and the soil C losses are subject to a very strong interannual variability. The actual range varied from 245 to 2092 g C m-2 yr-1 in case of the soil C losses. It can be therefore concluded that only long-term measurements (> 3 years) provides reliable information about the C dynamics of drained fen mires. Due to the high interannual variability, there is a high risk to get largely biased results if only short-term measurements will be done.

Mississippi Survey Completed

Treesearch

R. L. Johnson

1958-01-01

Mississippi forests are now growing more pine but less hardwood than is being cut, according to a new survey of the State's forest resources. But because many timber stands are not fully stocked, growth is only about half the potential.

Minnesota logging utilization factors, 1975-1976--development, use, implications.

Treesearch

James E. Blyth; W. Brad Smith

1979-01-01

Discusses Minnesota saw log and pulpwood logging utilization factors developed during 1975-1976 and their implications. Compares factors for several species groups and shows their use in estimating growing stock cut for pulpwood and saw logs.

Measuring Corporate Smarts.

ERIC Educational Resources Information Center

Delahoussaye, Martin; Ellis, Kristine; Bolch, Matt

2002-01-01

Provides empirical evidence that significant investment in work force development leads to increased shareholder value. Suggests that management should heed the evidence when considering cutting training and development budgets. Profiles 11 companies' stock performance and discusses their training and development initiatives. (JOW)

Degree-strength correlation reveals anomalous trading behavior.

PubMed

Sun, Xiao-Qian; Shen, Hua-Wei; Cheng, Xue-Qi; Wang, Zhao-Yang

2012-01-01

Manipulation is an important issue for both developed and emerging stock markets. Many efforts have been made to detect manipulation in stock markets. However, it is still an open problem to identify the fraudulent traders, especially when they collude with each other. In this paper, we focus on the problem of identifying the anomalous traders using the transaction data of eight manipulated stocks and forty-four non-manipulated stocks during a one-year period. By analyzing the trading networks of stocks, we find that the trading networks of manipulated stocks exhibit significantly higher degree-strength correlation than the trading networks of non-manipulated stocks and the randomized trading networks. We further propose a method to detect anomalous traders of manipulated stocks based on statistical significance analysis of degree-strength correlation. Experimental results demonstrate that our method is effective at distinguishing the manipulated stocks from non-manipulated ones. Our method outperforms the traditional weight-threshold method at identifying the anomalous traders in manipulated stocks. More importantly, our method is difficult to be fooled by colluded traders.

Local Structure Fixation in the Composite Manufacturing Chain

NASA Astrophysics Data System (ADS)

Girdauskaite, Lina; Krzywinski, Sybille; Rödel, Hartmut; Wildasin-Werner, Andrea; Böhme, Ralf; Jansen, Irene

2010-12-01

Compared to metal materials, textile reinforced composites show interesting features, but also higher production costs because of low automation rate in the manufacturing chain at this time. Their applicability is also limited due to quality problems, which restrict the production of complex shaped dry textile preforms. New technologies, design concepts, and cost-effective manufacturing methods are needed in order to establish further fields of application. This paper deals with possible ways to improve the textile deformation process by locally applying a fixative to the structure parallel to the cut. This hinders unwanted deformation in the textile stock during the subsequent stacking and formation steps. It is found that suitable thermoplastic binders, applied in the appropriate manner do not restrict formation of the textile and have no negative influence on the mechanical properties of the composite.

Growth response of Casuarina equisetifolia Forst. rooted stem cuttings to Frankia in nursery and field conditions.

PubMed

Karthikeyan, A; Chandrasekaran, K; Geetha, M; Kalaiselvi, R

2013-11-01

Casuarina equisetifolia Forst. is a tree crop that provides fuel wood, land reclamation, dune stabilization, and scaffolding for construction, shelter belts, and pulp and paper production. C. equisetifolia fixes atmospheric nitrogen through a symbiotic relationship with Frankia, a soil bacterium of the actinobacteria group. The roots of C. equisetifolia produce root nodules where the bacteria fix atmospheric nitrogen, which is an essential nutrient for all plant metabolic activities. However, rooted stem cuttings of elite clones of C. equisetifolia by vegetative propagation is being planted by the farmers of Pondicherry as costeffective method. As the vegetative propagation method uses inert material (vermiculite) for rooting there is no chance for Frankia association. Therefore after planting of these stocks the farmers are applying 150 kg of di-ammonium phosphate (DAP)/acre/year. To overcome this fertilizer usage, the Frankia-inoculated rooted stem cuttings were propagated under nursery conditions and transplanted in the nutrient-deficient soils of Karaikal, Pondicherry (India), in this study. Under nursery experiments the growth and biomass of C. equisetifolia rooted stem cuttings inoculated with Frankia showed 3 times higher growth and biomass than uninoculated control. These stocks were transplanted and monitored for their growth and survival for 1 year in the nutrient-deficient farm land. The results showed that the rooted stem cuttings of C. equisetifolia significantly improved growth in height (8.8 m), stem girth (9.6 cm) and tissue nitrogen content (3.3 mg g-1) than uninoculated controls. The soil nutrient status was also improved due to inoculation of Frankia.

Detecting anomalous traders using multi-slice network analysis

NASA Astrophysics Data System (ADS)

Sun, Xiao-Qian; Shen, Hua-Wei; Cheng, Xue-Qi; Zhang, Yuqing

2017-05-01

Manipulation is an important issue for both developed and emerging stock markets. Many efforts have been made to detect manipulation in stock market. However, it is still an open problem to identify the fraudulent traders, especially when they collude with each other. In this paper, we focus on the problem of identifying anomalous traders using the transaction data of 8 manipulated stocks and 42 non-manipulated stocks during a one-year period. For each stock, we construct a multi-slice trading network to characterize the daily trading behavior and the cross-day participation of each trader. Comparing the multi-slice trading network of manipulated stocks and non-manipulated stocks with their randomized version, we find that manipulated stocks exhibit high number of trader pairs that trade with each other in multiple days and high deviation from randomized network at correlation between trading frequency and trading activity. These findings are effective at distinguishing manipulated stocks from non-manipulated ones and at identifying anomalous traders.

Modeling of tool path for the CNC sheet cutting machines

NASA Astrophysics Data System (ADS)

Petunin, Aleksandr A.

2015-11-01

In the paper the problem of tool path optimization for CNC (Computer Numerical Control) cutting machines is considered. The classification of the cutting techniques is offered. We also propose a new classification of toll path problems. The tasks of cost minimization and time minimization for standard cutting technique (Continuous Cutting Problem, CCP) and for one of non-standard cutting techniques (Segment Continuous Cutting Problem, SCCP) are formalized. We show that the optimization tasks can be interpreted as discrete optimization problem (generalized travel salesman problem with additional constraints, GTSP). Formalization of some constraints for these tasks is described. For the solution GTSP we offer to use mathematical model of Prof. Chentsov based on concept of a megalopolis and dynamic programming.

Degree-Strength Correlation Reveals Anomalous Trading Behavior

PubMed Central

Sun, Xiao-Qian; Shen, Hua-Wei; Cheng, Xue-Qi; Wang, Zhao-Yang

2012-01-01

Manipulation is an important issue for both developed and emerging stock markets. Many efforts have been made to detect manipulation in stock markets. However, it is still an open problem to identify the fraudulent traders, especially when they collude with each other. In this paper, we focus on the problem of identifying the anomalous traders using the transaction data of eight manipulated stocks and forty-four non-manipulated stocks during a one-year period. By analyzing the trading networks of stocks, we find that the trading networks of manipulated stocks exhibit significantly higher degree-strength correlation than the trading networks of non-manipulated stocks and the randomized trading networks. We further propose a method to detect anomalous traders of manipulated stocks based on statistical significance analysis of degree-strength correlation. Experimental results demonstrate that our method is effective at distinguishing the manipulated stocks from non-manipulated ones. Our method outperforms the traditional weight-threshold method at identifying the anomalous traders in manipulated stocks. More importantly, our method is difficult to be fooled by colluded traders. PMID:23082114

[To the issue on the optimization and regulation of microclimate in the subway trains and stations].

PubMed

Leksin, A G; Beresneva, T G; Kaptsov, V A; Korotich, L P; Evlampieva, M N; Timoshenkova, E V

2014-01-01

There is presented an overview of currently existing regulatory framework governing the parameters of the microclimate in the salons of subway passenger cars and stations. Analysis of the normative documents indicated that they contain very incomplete, contradictory, often unfounded information about the parameters of microclimate parameters in salons of subway rolling stock. Also, there are no clear cut hygienically-sound requirements for the work of imposed on the rolling stock subway systems provide microclimate, including new systems for air conditioning and disinfection.

Research on NC laser combined cutting optimization model of sheet metal parts

NASA Astrophysics Data System (ADS)

Wu, Z. Y.; Zhang, Y. L.; Li, L.; Wu, L. H.; Liu, N. B.

2017-09-01

The optimization problem for NC laser combined cutting of sheet metal parts was taken as the research object in this paper. The problem included two contents: combined packing optimization and combined cutting path optimization. In the problem of combined packing optimization, the method of “genetic algorithm + gravity center NFP + geometric transformation” was used to optimize the packing of sheet metal parts. In the problem of combined cutting path optimization, the mathematical model of cutting path optimization was established based on the parts cutting constraint rules of internal contour priority and cross cutting. The model played an important role in the optimization calculation of NC laser combined cutting.

Research on cutting path optimization of sheet metal parts based on ant colony algorithm

NASA Astrophysics Data System (ADS)

Wu, Z. Y.; Ling, H.; Li, L.; Wu, L. H.; Liu, N. B.

2017-09-01

In view of the disadvantages of the current cutting path optimization methods of sheet metal parts, a new method based on ant colony algorithm was proposed in this paper. The cutting path optimization problem of sheet metal parts was taken as the research object. The essence and optimization goal of the optimization problem were presented. The traditional serial cutting constraint rule was improved. The cutting constraint rule with cross cutting was proposed. The contour lines of parts were discretized and the mathematical model of cutting path optimization was established. Thus the problem was converted into the selection problem of contour lines of parts. Ant colony algorithm was used to solve the problem. The principle and steps of the algorithm were analyzed.

29 CFR 520.300 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... from leather or from any shoe-upper material of all cut stock and findings for footwear, including bows...) Rainwear means the manufacture of waterproofed garments and raincoats from oiled cloth or other materials... negligees from woven fabrics; corsets and other body supporting garments from any material; infants' and...

29 CFR 520.300 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... from leather or from any shoe-upper material of all cut stock and findings for footwear, including bows...) Rainwear means the manufacture of waterproofed garments and raincoats from oiled cloth or other materials... negligees from woven fabrics; corsets and other body supporting garments from any material; infants' and...

29 CFR 520.300 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... from leather or from any shoe-upper material of all cut stock and findings for footwear, including bows...) Rainwear means the manufacture of waterproofed garments and raincoats from oiled cloth or other materials... negligees from woven fabrics; corsets and other body supporting garments from any material; infants' and...

Cutting Costs on Computer Forms.

ERIC Educational Resources Information Center

Rupp, Robert V., Jr.

1989-01-01

Using the experience of Ford Motor Company, Oscar Meyer, and IBM, this article shows that companies are enjoying high quality product performance and substantially lower costs by converting from premium white bond computer stock forms to blended bond forms. School administrators are advised to do likewise. (MLH)

Regenerating eastern hemlock in the Lake States

Treesearch

Richard M. Godman

1992-01-01

The eastern hemlock type is declining in area faster than any other. Growing-stock volume, for example, declined 71 percent in only 20 years in Michigan, and has declined similarly in Wisconsin. Many land management agencies have stopped cutting hemlock until satisfactory regeneration can be assured.

Careful logging, partial cutting and the protection of terrestrial and aquatic habitats

Treesearch

Daniel C. Dey

1994-01-01

Stand management activites influence (1) tree growth and quality; (2) stand structure, stocking and composition; (3) wildlife and aquatic habitat quality; and (4) long-term site productivity. The cumulative impacts of stand-level treatments affect ecosystem structure and function at the landscape level.

Projecting the aspen resource in the Lake States.

Treesearch

William A. Leuschner

1972-01-01

Aspen growing stock inventories for nine Lake States forest survey units were updated to the common base year of 1968. Cut and inventory were projected to the year 2000 under three sets of assumptions. Potential shortages were found in northeastern Wisconsin and Michigan if historical trends continue.

The Effectiveness of Asulam for Bracken ( Pteridium aquilinum) Control in the United Kingdom: A Meta-Analysis

NASA Astrophysics Data System (ADS)

Stewart, Gavin B.; Pullin, Andrew S.; Tyler, Claire

2007-11-01

Bracken ( Pteridium aquilinum) is a major problem for livestock-based extensive agriculture, conservation, recreation, and game management globally. It is an invasive species often achieving dominance to the detriment of other species. Control is essential to maintain plant communities such as grassland and lowland heath or if extensive grazing by domestic stock, particularly sheep, is to be viable on upland margins. Bracken is managed primarily by herbicide application or cutting but other techniques including rolling, burning, and grazing are also utilized. Here we evaluate the evidence regarding the effectiveness of asulam for the control of bracken. Thirteen studies provided data for meta-analyses which demonstrate that application of the herbicide asulam reduces bracken abundance. Subgroup analyses indicate that the number of treatments had an important impact, with multiple follow-up treatments more effective than one or two treatments. Management practices should reflect the requirement for repeated follow-up. There is insufficient available experimental evidence for quantitative analysis of the effectiveness of other management interventions, although this results from lack of reporting in papers where cutting and comparisons of cutting and asulam application are concerned. Systematic searching and meta-analytical synthesis have effectively demonstrated the limits of current knowledge, based on recorded empirical evidence, and increasing the call for more rigorous monitoring of bracken control techniques. Lack of experimental evidence on the effectiveness of management such as rolling or grazing with hardy cattle breeds contrasts with the widespread acceptance of their use through dissemination of experience.

Chemical Warfare Agent Decontamination Efficacy Testing Large-Scale Chamber mVHP (registered trademerk) Decontamination System Evaluation

DTIC Science & Technology

2010-02-01

APPENDIXES A. COUPON STOCK MATERIAL AND PREPARATION 141 B. CONTROL CHARTS 143 C. ANALYTICAL INSTRUMENTATION PARAMETERS 171 D. COUPON CHAIN-OF...were cut from stock material. Vitron® is a registered trademark of Vitron Manufacturing, Phoenix, AZ Kapton® is a register trademark of E.I. DuPont... Eft Wipe Wipe Ext. Eff. 15M 15M 15M 15M 0 300 600 0 4/4 5/5 5/5 4/4 3,740,999 ± 2,377,014 135876 ±51295 50896 ± 38227 120004 ±8130

Modern laser technologies used for cutting textile materials

NASA Astrophysics Data System (ADS)

Isarie, Claudiu; Dragan, Anca; Isarie, Laura; Nastase, Dan

2006-02-01

With modern laser technologies we can cut multiple layers at once, yielding high production levels and short setup times between cutting runs. One example could be the operation of cutting the material named Nylon 66, used to manufacture automobile airbags. With laser, up to seven layers of Nylon 66 can be cut in one pass, that means high production rates on a single machine. Airbags must be precisely crafted piece of critical safety equipment that is built to very high levels of precision in a mass production environment. Of course, synthetic material, used for airbags, can be cut also by a conventional fixed blade system, but for a high production rates and a long term low-maintenance, laser cutting is most suitable. Most systems, are equipped with two material handling systems, which can cut on one half of he table while the finished product is being removed from the other half and the new stock material laid out. The laser system is reliable and adaptable to any flatbed-cutting task. Computer controlled industrial cutting and plotting machines are the latest offerings from a well established and experienced industrial engineering company that is dedicated to reduce cutting costs and boosting productivity in today's competitive industrial machine tool market. In this way, just one machine can carry out a multitude of production tasks. Authors have studied the cutting parameters for different textile materials, to reach the maximum output of the process.

Chapter 28. Establishing plants by transplanting and interseeding

Treesearch

Richard Stevens

2004-01-01

Many shrubs, trees, forbs, and grasses can be successfully established to provide rapid, effective soil stabilization, forage, and cover through transplanting bareroot or container-grown stock, wildings, and stem cuttings (McArthur and others 1984a; Monsen 1974; Shaw 1981; Stevens 1980a, 1994; Tiedemann and others 1976).

50 CFR 697.2 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-10-01

... has a covered way to a dwelling. Natural Atlantic sturgeon means any Atlantic sturgeon that is not the...). One-quarter-inch (1/4-inch) v-shaped notch means a straight-sided triangular cut, without setal hairs... hairs. Stocked Atlantic sturgeon means any Atlantic sturgeon cultured in a hatchery that is placed in...

50 CFR 697.2 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-10-01

... has a covered way to a dwelling. Natural Atlantic sturgeon means any Atlantic sturgeon that is not the...). One-quarter-inch (1/4-inch) v-shaped notch means a straight-sided triangular cut, without setal hairs... hairs. Stocked Atlantic sturgeon means any Atlantic sturgeon cultured in a hatchery that is placed in...

50 CFR 697.2 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-10-01

... has a covered way to a dwelling. Natural Atlantic sturgeon means any Atlantic sturgeon that is not the...). One-quarter-inch (1/4-inch) v-shaped notch means a straight-sided triangular cut, without setal hairs... hairs. Stocked Atlantic sturgeon means any Atlantic sturgeon cultured in a hatchery that is placed in...

Fertilization [Chapter 11

Treesearch

Douglass F. Jacobs; Thomas D. Landis

2009-01-01

Fertilization is one of the most critical components of producing high-quality nursery stock. Seedlings rapidly deplete mineral nutrients stored within seeds, and cuttings have limited nutrient reserves. Therefore, to achieve desired growth rates, nursery plants must rely on root uptake of nutrients from the growing medium. Plants require adequate quantities of mineral...

Computer program for updating timber resource statistics by county, with tables for Mississippi

Treesearch

Roy C. Beltz; Joe F. Christopher

1970-01-01

A computer program is available for updating Forest Survey estimates of timber growth, cut, and inventory volume by species group, for sawtimber and growing stock. Changes in rate of product removal are estimated from changes in State severance tax data. Updated tables are given for Mississippi.

Timber management guide for shortleaf pine and oak-pine types in Missouri.

Treesearch

K.A. Brinkman; N.F. Rogers

1967-01-01

Summarizes recommended management practices for the shortleaf pine and oak-pine types in Missouri. Describes sites and soils, and silvical characteristics of pine; discusses rotations, cutting cycles, stocking levels, growing space requirements, and regeneration techniques; and prescribes treatments for stands with specified characteristics to maximize returns from...

Finding minimum-quotient cuts in planar graphs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Park, J.K.; Phillips, C.A.

Given a graph G = (V, E) where each vertex v {element_of} V is assigned a weight w(v) and each edge e {element_of} E is assigned a cost c(e), the quotient of a cut partitioning the vertices of V into sets S and {bar S} is c(S, {bar S})/min{l_brace}w(S), w(S){r_brace}, where c(S, {bar S}) is the sum of the costs of the edges crossing the cut and w(S) and w({bar S}) are the sum of the weights of the vertices in S and {bar S}, respectively. The problem of finding a cut whose quotient is minimum for a graph hasmore » in recent years attracted considerable attention, due in large part to the work of Rao and Leighton and Rao. They have shown that an algorithm (exact or approximation) for the minimum-quotient-cut problem can be used to obtain an approximation algorithm for the more famous minimumb-balanced-cut problem, which requires finding a cut (S,{bar S}) minimizing c(S,{bar S}) subject to the constraint bW {le} w(S) {le} (1 {minus} b)W, where W is the total vertex weight and b is some fixed balance in the range 0 < b {le} {1/2}. Unfortunately, the minimum-quotient-cut problem is strongly NP-hard for general graphs, and the best polynomial-time approximation algorithm known for the general problem guarantees only a cut whose quotient is at mostO(lg n) times optimal, where n is the size of the graph. However, for planar graphs, the minimum-quotient-cut problem appears more tractable, as Rao has developed several efficient approximation algorithms for the planar version of the problem capable of finding a cut whose quotient is at most some constant times optimal. In this paper, we improve Rao`s algorithms, both in terms of accuracy and speed. As our first result, we present two pseudopolynomial-time exact algorithms for the planar minimum-quotient-cut problem. As Rao`s most accurate approximation algorithm for the problem -- also a pseudopolynomial-time algorithm -- guarantees only a 1.5-times-optimal cut, our algorithms represent a significant advance.« less

Finding minimum-quotient cuts in planar graphs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Park, J.K.; Phillips, C.A.

Given a graph G = (V, E) where each vertex v [element of] V is assigned a weight w(v) and each edge e [element of] E is assigned a cost c(e), the quotient of a cut partitioning the vertices of V into sets S and [bar S] is c(S, [bar S])/min[l brace]w(S), w(S)[r brace], where c(S, [bar S]) is the sum of the costs of the edges crossing the cut and w(S) and w([bar S]) are the sum of the weights of the vertices in S and [bar S], respectively. The problem of finding a cut whose quotient is minimummore » for a graph has in recent years attracted considerable attention, due in large part to the work of Rao and Leighton and Rao. They have shown that an algorithm (exact or approximation) for the minimum-quotient-cut problem can be used to obtain an approximation algorithm for the more famous minimumb-balanced-cut problem, which requires finding a cut (S,[bar S]) minimizing c(S,[bar S]) subject to the constraint bW [le] w(S) [le] (1 [minus] b)W, where W is the total vertex weight and b is some fixed balance in the range 0 < b [le] [1/2]. Unfortunately, the minimum-quotient-cut problem is strongly NP-hard for general graphs, and the best polynomial-time approximation algorithm known for the general problem guarantees only a cut whose quotient is at mostO(lg n) times optimal, where n is the size of the graph. However, for planar graphs, the minimum-quotient-cut problem appears more tractable, as Rao has developed several efficient approximation algorithms for the planar version of the problem capable of finding a cut whose quotient is at most some constant times optimal. In this paper, we improve Rao's algorithms, both in terms of accuracy and speed. As our first result, we present two pseudopolynomial-time exact algorithms for the planar minimum-quotient-cut problem. As Rao's most accurate approximation algorithm for the problem -- also a pseudopolynomial-time algorithm -- guarantees only a 1.5-times-optimal cut, our algorithms represent a significant advance.« less

Stock price estimation using ensemble Kalman Filter square root method

NASA Astrophysics Data System (ADS)

Karya, D. F.; Katias, P.; Herlambang, T.

2018-04-01

Shares are securities as the possession or equity evidence of an individual or corporation over an enterprise, especially public companies whose activity is stock trading. Investment in stocks trading is most likely to be the option of investors as stocks trading offers attractive profits. In determining a choice of safe investment in the stocks, the investors require a way of assessing the stock prices to buy so as to help optimize their profits. An effective method of analysis which will reduce the risk the investors may bear is by predicting or estimating the stock price. Estimation is carried out as a problem sometimes can be solved by using previous information or data related or relevant to the problem. The contribution of this paper is that the estimates of stock prices in high, low, and close categorycan be utilized as investors’ consideration for decision making in investment. In this paper, stock price estimation was made by using the Ensemble Kalman Filter Square Root method (EnKF-SR) and Ensemble Kalman Filter method (EnKF). The simulation results showed that the resulted estimation by applying EnKF method was more accurate than that by the EnKF-SR, with an estimation error of about 0.2 % by EnKF and an estimation error of 2.6 % by EnKF-SR.

Managing the Budget: Stock-Flow Reasoning and the CO2 Accumulation Problem.

PubMed

Newell, Ben R; Kary, Arthur; Moore, Chris; Gonzalez, Cleotilde

2016-01-01

The majority of people show persistent poor performance in reasoning about "stock-flow problems" in the laboratory. An important example is the failure to understand the relationship between the "stock" of CO2 in the atmosphere, the "inflow" via anthropogenic CO2 emissions, and the "outflow" via natural CO2 absorption. This study addresses potential causes of reasoning failures in the CO2 accumulation problem and reports two experiments involving a simple re-framing of the task as managing an analogous financial (rather than CO2 ) budget. In Experiment 1 a financial version of the task that required participants to think in terms of controlling debt demonstrated significant improvements compared to a standard CO2 accumulation problem. Experiment 2, in which participants were invited to think about managing savings, suggested that this improvement was fortuitous and coincidental rather than due to a fundamental change in understanding the stock-flow relationships. The role of graphical information in aiding or abetting stock-flow reasoning was also explored in both experiments, with the results suggesting that graphs do not always assist understanding. The potential for leveraging the kind of reasoning exhibited in such tasks in an effort to change people's willingness to reduce CO2 emissions is briefly discussed. Copyright © 2015 Cognitive Science Society, Inc.

Dimension yields from yellow-poplar lumber

Treesearch

R. C. Gilmore; J. D. Danielson

1984-01-01

The available supply of yellow poplar (Liriodendron tulipifera L.), its potential for new uses, and its continuing importance to the furniture industry have created a need to accumulate additional information about this species. As an aid to better utilization of this species, charts for determining cutting stock yields from yellow poplar lumber are presented for each...

Welfare Use when Approaching the Time Limit

ERIC Educational Resources Information Center

Mazzolari, Francesca

2007-01-01

Time limits reduce caseloads directly by cutting off benefits after a time-limited usage, but may also provide families with an incentive to reduce welfare use in order to conserve their benefits. Both effects depend on the stock of remaining months of eligibility. This is the first empirical study to incorporate information on this crucial…

PHYTOREMEDIATION OF GROUNDWATER AT AIR FORCE PLANT 4, CARSWELL, TEXAS - INNOVATIVE TECHNOLOGY EVALUATION REPORT (CD-ROM)

EPA Science Inventory

Over 600 Cottonwood trees were planted over a shallow groundwater plume in an attempt to detoxify the tricWoroethylene (TCE) in a groundwater plume at a former Air Force facility. Two planting techniques were used: rooted stock about two years old, and 18 inch cuttings were insta...

PHYTOREMEDIATION OF GROUNDWATER AT AIR FORCE PLANT 4, CARSWELL, TEXAS - INNOVATIVE TECHNOLOGY EVALUATION REPORT

EPA Science Inventory

Over 600 Cottonwood trees were planted over a shallow groundwater plume in an attempt to detoxify the trichloroethylene (TCE) in a groundwater plume at a former Air Force facility. Two planting techniques were used: rooted stock about two years old, and 18 inch cuttings were inst...

THE BIOLOGICAL RESPONSE OF A SMALL CATCHMENT TO CLEAR-CUTTING

EPA Science Inventory

We modified a Plant-Soil Model (Stieglitz et al, 2006, GBC) that simulates the effects of a disturbance on stocks and fluxes of carbon (C) and nitrogen (N) in terrestrial ecosystems. The model was used to examine past, present and future changes in C storage and C-N dynamics at ...

50 CFR 635.2 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-10-01

... number of sharks to maintain time series for stock assessments and for other scientific research purposes... States means the time and place at which a fish is filleted, cut into steaks, or processed in any way... hours and ending at 2400 hours local time, during which a person aboard a vessel for which a General...

Peculiarities of solving the problems of modern logistics in high-rise construction and industrial production

NASA Astrophysics Data System (ADS)

Rubtsov, Anatoliy E.; Ushakova, Elena V.; Chirkova, Tamara V.

2018-03-01

Basing on the analysis of the enterprise (construction organization) structure and infrastructure of the entire logistics system in which this enterprise (construction organization) operates, this article proposes an approach to solve the problems of structural optimization and a set of calculation tasks, based on customer orders as well as on the required levels of insurance stocks, transit stocks and other types of stocks in the distribution network, modes of operation of the in-company transport and storage complex and a number of other factors.

Market Confidence Predicts Stock Price: Beyond Supply and Demand.

PubMed

Sun, Xiao-Qian; Shen, Hua-Wei; Cheng, Xue-Qi; Zhang, Yuqing

2016-01-01

Stock price prediction is an important and challenging problem in stock market analysis. Existing prediction methods either exploit autocorrelation of stock price and its correlation with the supply and demand of stock, or explore predictive indictors exogenous to stock market. In this paper, using transaction record of stocks with identifier of traders, we introduce an index to characterize market confidence, i.e., the ratio of the number of traders who is active in two successive trading days to the number of active traders in a certain trading day. Strong Granger causality is found between the index of market confidence and stock price. We further predict stock price by incorporating the index of market confidence into a neural network based on time series of stock price. Experimental results on 50 stocks in two Chinese Stock Exchanges demonstrate that the accuracy of stock price prediction is significantly improved by the inclusion of the market confidence index. This study sheds light on using cross-day trading behavior to characterize market confidence and to predict stock price.

Effects of Forged Stock and Pure Aluminum Coating on Cryogenic Performance of Heat Treated Aluminum Mirrors

NASA Technical Reports Server (NTRS)

Toland, Ronald; Ohl, Raymond G.; Barthelmy, Michael P.; Zewari, S. Wahid; Greenhouse, Matthew A.; MacKenty, John W.

2003-01-01

In spite of its baseline mechanical stress relief, aluminum 6061-T651 harbors some residual stress that may relieve and distort mirror figure to unacceptable levels at cryogenic operating temperatures unless relieved during fabrication. Cryogenic instruments using aluminum mirrors for both ground-based and space IR astronomy have employed a variety of heat treatment formulae, with mixed results. We present the results of an on-going test program designed to empirically determine the effects of different stress relief procedures for aluminum mirrors. Earlier test results identified a preferred heat treatment for flat and spherical mirrors diamond turned from blanks cut out of Al6061-T651 plate stock. Further tests have been performed on mirrors from forged stock and one set from plate stock coated with Alumiplate(TM) aluminum coating to measure the effect of these variables on cryogenic performance. The mirrors are tested for figure error and radius of curvature at room temperature and at 80 K for three thermal cycles. We correlate the results of our optical testing with heat treatment and metallographic data.

Trading Network Predicts Stock Price

PubMed Central

Sun, Xiao-Qian; Shen, Hua-Wei; Cheng, Xue-Qi

2014-01-01

Stock price prediction is an important and challenging problem for studying financial markets. Existing studies are mainly based on the time series of stock price or the operation performance of listed company. In this paper, we propose to predict stock price based on investors' trading behavior. For each stock, we characterize the daily trading relationship among its investors using a trading network. We then classify the nodes of trading network into three roles according to their connectivity pattern. Strong Granger causality is found between stock price and trading relationship indices, i.e., the fraction of trading relationship among nodes with different roles. We further predict stock price by incorporating these trading relationship indices into a neural network based on time series of stock price. Experimental results on 51 stocks in two Chinese Stock Exchanges demonstrate the accuracy of stock price prediction is significantly improved by the inclusion of trading relationship indices. PMID:24429767

Trading network predicts stock price.

PubMed

Sun, Xiao-Qian; Shen, Hua-Wei; Cheng, Xue-Qi

2014-01-16

Stock price prediction is an important and challenging problem for studying financial markets. Existing studies are mainly based on the time series of stock price or the operation performance of listed company. In this paper, we propose to predict stock price based on investors' trading behavior. For each stock, we characterize the daily trading relationship among its investors using a trading network. We then classify the nodes of trading network into three roles according to their connectivity pattern. Strong Granger causality is found between stock price and trading relationship indices, i.e., the fraction of trading relationship among nodes with different roles. We further predict stock price by incorporating these trading relationship indices into a neural network based on time series of stock price. Experimental results on 51 stocks in two Chinese Stock Exchanges demonstrate the accuracy of stock price prediction is significantly improved by the inclusion of trading relationship indices.

Taking Stock of Risk Factors for Child/Youth Externalizing Behavior Problems.

ERIC Educational Resources Information Center

Hann, Della M., Ed.

Research on child and adolescent conduct problems has proliferated over the past 15 years, resulting in an extensive array of risk factors, processes, and targets for intervention. To capitalize fully on this extensive research base and contribute effectively to public mental health, the field now needs to take stock of what is known about child…

Three-Dimensional Profiles Using a Spherical Cutting Bit: Problem Solving in Practice

ERIC Educational Resources Information Center

Ollerton, Richard L.; Iskov, Grant H.; Shannon, Anthony G.

2002-01-01

An engineering problem concerned with relating the coordinates of the centre of a spherical cutting tool to the actual cutting surface leads to a potentially rich example of problem-solving techniques. Basic calculus, Lagrange multipliers and vector calculus techniques are employed to produce solutions that may be compared to better understand…

Birefringent corrugated waveguide

DOEpatents

Moeller, Charles P.

1990-01-01

A corrugated waveguide having a circular bore and noncircularly symmetric corrugations, and preferably elliptical corrugations, provides birefringence for rotation of polarization in the HE.sub.11 mode. The corrugated waveguide may be fabricated by cutting circular grooves on a lathe in a cylindrical tube or rod of aluminum of a diameter suitable for the bore of the waveguide, and then cutting an approximation to ellipses for the corrugations using a cutting radius R.sub.0 from the bore axis that is greater than the bore radius, and then making two circular cuts using a radius R.sub.1 less than R.sub.0 at centers +b and -b from the axis of the waveguide bore. Alternatively, stock for the mandrel may be formed with an elliptical transverse cross section, and then only the circular grooves need be cut on a lathe, leaving elliptical corrugations between the grooves. In either case, the mandrel is first electroplated and then dissolved leaving a corrugated waveguide with noncircularly symmetric corrugations. A transition waveguide is used that gradually varies from circular to elliptical corrugations to couple a circularly corrugated waveguide to an elliptically corrugated waveguide.

Panel Discussion: Container Stock and Why?

Treesearch

Randy Friedlander

2006-01-01

The Colville Confederated Tribes Nursery grows conifers, native shrubs and grasses, and root and stem cuttings in three cavity sizes of Styroblock™ containers, including 5.5, 10, and 20.5 in3 (90, 164, and 336 cm3). The choice of container size is based on client request and the requirements of the outplanting sites.

Using AASL's "Health and Wellness" and "Crisis Toolkits"

ERIC Educational Resources Information Center

Logan, Debra Kay

2009-01-01

Whether a school library program is the picture of good health in a state that mandates a professionally staffed library media center in every building or is suffering in a low-wealth district that is facing drastic cuts, the recently launched toolkits by the American Association of School Librarians (AASL) are stocked with useful strategies and…

Simulating Timber and Deer Food Potential In Loblolly Pine Plantations

Treesearch

Clifford A. Myers

1977-01-01

This computer program analyzes both timber and deer food production on managed forests, providing estimates of the number of acres required per deer for each week or month, yearly timber cuts, and current timber growing stock, as well as a cost and return analysis of the timber operation. Input variables include stand descriptors, controls on management, stumpage...

Stand structure and stocking control in Appalachian mixed hardwoods

Treesearch

George R., Jr. Trimble; H. Clay Smith

1976-01-01

Uneven-aged management using a "q" technique for structure control is discussed for Appalachian mixed hardwoods. The success in attaining stand structure goals with periodic selection cuts was evaluated. Where these goals had not been reached, the authors speculated, on the basis of current stand conditions, whether they would be reached, and if so, when. For...

Manufacturing Methods for Strategic Materials Reclamation.

DTIC Science & Technology

1979-12-14

86 AIRCO Ingot N o. 4116 Casting Profile ......................................................... 199 87 Identification of Conversion of AIRCO Ingot...No. 4115 to Bar Stock .............. 201 88 6-in. RCS Billet Cutting Layout for Samples of Ingot No. 4115 Sent to P&WA 202 89 Identification of 1-in...132 31 Identification of Foreign Particles Detected in Rolled Plate .......................... 136 32 Mechanical Property Data of

Thidiazuron, a non-metablized cytokinin, shows promise in extending the life of potted plants

USDA-ARS?s Scientific Manuscript database

Application of low concentrations of thidiazuron (N-phenyl-N’-1,2,3-thiadiazol-5-yl urea, TDZ) has been shown to be a very effective means of delaying leaf yellowing in cut flowers such as alstroemeria, stock, lilies and tulips. We examined the possible use of this compound for delaying leaf yellow...

Topographic Position and Site Index: An Oak Regeneratoin Relationship

Treesearch

David I. Shostak; Edward F. Loewenstein; Mark R. Dubois

2004-01-01

In 1996, a 10-year study was initiated in an upland hardwood forest in northern Alabama to assess establishment success and stocking levels of oak reproduction following three regeneration treatments: block clearcutting, strip clearcutting, and deferment cutting. Each treatment was applied to two 4-acre stands. In addition, two 2-acre uncut controls were monitored. All...

The Black Pearl mine, Arizona - Wolframite veins and stockscheider pegmatite related to an albitic stock

NASA Technical Reports Server (NTRS)

Schmitz, Christopher; Burt, Donald M.

1990-01-01

Wolframite-bearing quartz veins flanked by greisen alteration occur at and near the Black Pearl mine, Yavapai County, Arizona. The veins are genetically related to a small albitite stock, and cut a series of Proterozoic metasedimentary and intrusive rocks. The largest vein, the only one mined, is located at the apex of the stock. Field relations imply that this stock is a late-stage differentiate of time 1.4-Ga anorogenic Lawler Peak batholith, which crops out about 3 km to the south. The albitites are of igneous origin and have suffered only minor deuteric alteration. A thin (1 to 2 m) pegmatite unit ('stockscheider') occurs at the contact of the Black Pearl Albitite stock with the country rocks. Directional indicators and other evidence suggest that the pegmatite was formed in the presence of a volatile-rich fluid phase close to the time of magma emplacement. The sudden change from coarse-grained microcline-rich pegmatite to fine-grained, albite-rich albitite suggests pressure quenching, possibly due to escape of fluids up the Black Pearl vein. Stockscheider-like textures typically occur near the apical contacts of productive plutons. The presence or absence of this texture is a useful guide in prospecting for lithophile metal deposits.

On size-constrained minimum s–t cut problems and size-constrained dense subgraph problems

DOE PAGES

Chen, Wenbin; Samatova, Nagiza F.; Stallmann, Matthias F.; ...

2015-10-30

In some application cases, the solutions of combinatorial optimization problems on graphs should satisfy an additional vertex size constraint. In this paper, we consider size-constrained minimum s–t cut problems and size-constrained dense subgraph problems. We introduce the minimum s–t cut with at-least-k vertices problem, the minimum s–t cut with at-most-k vertices problem, and the minimum s–t cut with exactly k vertices problem. We prove that they are NP-complete. Thus, they are not polynomially solvable unless P = NP. On the other hand, we also study the densest at-least-k-subgraph problem (DalkS) and the densest at-most-k-subgraph problem (DamkS) introduced by Andersen andmore » Chellapilla [1]. We present a polynomial time algorithm for DalkS when k is bounded by some constant c. We also present two approximation algorithms for DamkS. In conclusion, the first approximation algorithm for DamkS has an approximation ratio of n-1/k-1, where n is the number of vertices in the input graph. The second approximation algorithm for DamkS has an approximation ratio of O (n δ), for some δ < 1/3.« less

Graph cuts via l1 norm minimization.

PubMed

Bhusnurmath, Arvind; Taylor, Camillo J

2008-10-01

Graph cuts have become an increasingly important tool for solving a number of energy minimization problems in computer vision and other fields. In this paper, the graph cut problem is reformulated as an unconstrained l1 norm minimization that can be solved effectively using interior point methods. This reformulation exposes connections between the graph cuts and other related continuous optimization problems. Eventually the problem is reduced to solving a sequence of sparse linear systems involving the Laplacian of the underlying graph. The proposed procedure exploits the structure of these linear systems in a manner that is easily amenable to parallel implementations. Experimental results obtained by applying the procedure to graphs derived from image processing problems are provided.

The illogicality of stock-brokers: psychological experiments on the effects of prior knowledge and belief biases on logical reasoning in stock trading.

PubMed

Knauff, Markus; Budeck, Claudia; Wolf, Ann G; Hamburger, Kai

2010-10-18

Explanations for the current worldwide financial crisis are primarily provided by economists and politicians. However, in the present work we focus on the psychological-cognitive factors that most likely affect the thinking of people on the economic stage and thus might also have had an effect on the progression of the crises. One of these factors might be the effect of prior beliefs on reasoning and decision-making. So far, this question has been explored only to a limited extent. We report two experiments on logical reasoning competences of nineteen stock-brokers with long-lasting vocational experiences at the stock market. The premises of reasoning problems concerned stock trading and the experiments varied whether or not their conclusions--a proposition which is reached after considering the premises--agreed with the brokers' prior beliefs. Half of the problems had a conclusion that was highly plausible for stock-brokers while the other half had a highly implausible conclusion. The data show a strong belief bias. Stock-brokers were strongly biased by their prior knowledge. Lowest performance was found for inferences in which the problems caused a conflict between logical validity and the experts' belief. In these cases, the stock-brokers tended to make logically invalid inferences rather than give up their existing beliefs. Our findings support the thesis that cognitive factors have an effect on the decision-making on the financial market. In the present study, stock-brokers were guided more by past experience and existing beliefs than by logical thinking and rational decision-making. They had difficulties to disengage themselves from vastly anchored thinking patterns. However, we believe, that it is wrong to accuse the brokers for their "malfunctions", because such hard-wired cognitive principles are difficult to suppress even if the person is aware of them.

America's emphasis on welfare: is it children's welfare or corporate welfare?

PubMed

Raphel, Sally

2003-01-01

States are facing a collective budget shortfall of dollar 40 billion and may have to cut millions from programs that serve children and families. The 2004 proposal exacerbates the state fiscal crisis. Because of linkages between federal and state taxes, federal tax cuts have added to the loss of state revenue coming into states to assist with programs. In addition, the federal government is likely to cut human service funding to shore up its dollar 157 billion deficit, and many non-profit agencies are seeing donations slow dramatically because of the lagging economy and stock market It seems evident that the proposed federal budget cutbacks exacerbate state reductions in children's services, worsen the federal budget deficit, greatly increase the nation's debt, and mortgage America's future by passing the lack of investments in youth potential onto the next generation.

Market Confidence Predicts Stock Price: Beyond Supply and Demand

PubMed Central

Sun, Xiao-Qian; Shen, Hua-Wei; Cheng, Xue-Qi; Zhang, Yuqing

2016-01-01

Stock price prediction is an important and challenging problem in stock market analysis. Existing prediction methods either exploit autocorrelation of stock price and its correlation with the supply and demand of stock, or explore predictive indictors exogenous to stock market. In this paper, using transaction record of stocks with identifier of traders, we introduce an index to characterize market confidence, i.e., the ratio of the number of traders who is active in two successive trading days to the number of active traders in a certain trading day. Strong Granger causality is found between the index of market confidence and stock price. We further predict stock price by incorporating the index of market confidence into a neural network based on time series of stock price. Experimental results on 50 stocks in two Chinese Stock Exchanges demonstrate that the accuracy of stock price prediction is significantly improved by the inclusion of the market confidence index. This study sheds light on using cross-day trading behavior to characterize market confidence and to predict stock price. PMID:27391816

Deforestation and Carbon Stock Loss in Brazil's Amazonian Settlements

NASA Astrophysics Data System (ADS)

Yanai, Aurora Miho; Nogueira, Euler Melo; de Alencastro Graça, Paulo Maurício Lima; Fearnside, Philip Martin

2017-03-01

We estimate deforestation and the carbon stock in 2740 (82 %) of the 3325 settlements in Brazil's Legal Amazonia region. Estimates are made both using available satellite data and a carbon map for the "pre-modern" period (prior to 1970). We used data from Brazil's Project for Monitoring Deforestation in Amazonia updated through 2013 and from the Brazilian Biomes Deforestation Monitoring Project (PMDBBS) updated through 2010. To obtain the pre-modern and recent carbon stocks we performed an intersection between a carbon map and a map derived from settlement boundaries and deforestation data. Although the settlements analyzed occupied only 8 % of Legal Amazonia, our results indicate that these settlements contributed 17 % (160,410 km2) of total clearing (forest + non-forest) in Legal Amazonia (967,003 km2). This represents a clear-cutting of 41 % of the original vegetation in the settlements. Out of this total, 72 % (115,634 km2) was in the "Federal Settlement Project" (PA) category. Deforestation in settlements represents 20 % (2.6 Pg C) of the total carbon loss in Legal Amazonia (13.1 Pg C). The carbon stock in remaining vegetation represents 3.8 Pg C, or 6 % of the total remaining carbon stock in Legal Amazonia (58.6 Pg C) in the periods analyzed. The carbon reductions in settlements are caused both by the settlers and by external actors. Our findings suggest that agrarian reform policies contributed directly to carbon loss. Thus, the implementation of new settlements should consider potential carbon stock losses, especially if settlements are created in areas with high carbon stocks.

Modified Cheeger and Ratio Cut Methods Using the Ginzburg-Landau Functional for Classification of High-Dimensional Data

DTIC Science & Technology

2016-02-01

Modified Cheeger and Ratio Cut Methods Using the Ginzburg-Landau Functional for Classification of High-Dimensional Data Ekaterina Merkurjev*, Andrea...bertozzi@math.ucla.edu, xiaoran@isi.edu, lerman@isi.edu. Abstract Recent advances in clustering have included continuous relaxations of the Cheeger cut ...fully nonlinear Cheeger cut problem, as well as the ratio cut optimization task. Both problems are connected to total variation minimization, and the

Direct comparison of repeated soil inventory and carbon flux budget to detect soil carbon stock changes in grassland

NASA Astrophysics Data System (ADS)

Ammann, C.; Leifeld, J.; Neftel, A.; Fuhrer, J.

2012-04-01

Experimental assessment of soil carbon (C) stock changes over time is typically based on the application of either one of two methods, namely (i) repeated soil inventory and (ii) determination of the ecosystem C budget or net biome productivity (NBP) by continuous measurement of CO2 exchange in combination with quantification of other C imports and exports. However, there exist hardly any published study hitherto that directly compared the results of both methods. Here, we applied both methods in parallel to determine C stock changes of two temperate grassland fields previously converted from long-term cropland. The grasslands differed in management intensity with either intensive management (high fertilization, frequent cutting) or extensive management (no fertilization, less frequent cutting). Soil organic C stocks (0-45 cm depth) were quantified at the beginning (2001) and the end (2006) of a 5 year observational period using the equivalent soil mass approach. For the same period and in both fields, NBP was quantified from net CO2 fluxes monitored using eddy covariance systems, and measured C import by organic fertilizer and C export by harvest. Both NBP and repeated soil inventories revealed a consistent and significant difference between management systems of 170 ± 48 and 253 ± 182 g C m-2 a-1, respectively. For both fields, the inventory method showed a tendency towards higher C loss/smaller C gain than NBP. In the extensive field, a significant C loss was observed by the inventory but not by the NBP approach. Thus both, flux measurements and repeated soil sampling, seem to be adequate and equally suited for detecting relative management effects. However, the suitability for tracking absolute changes in SOC could not be proven for neither of the two methods. Overall, our findings stress the need for more direct comparisons to evaluate whether the observed difference in the outcome of the two approaches reflects a general methodological bias, which would have important implications for regional terrestrial C budgets.

Performance of two oak species and three planting stocks on lands damaged by hurricane Katrina

Treesearch

John A. Conrad III; Andrew W. Ezell; Emily B. Schultz; John D. Hodges

2015-01-01

Hurricane Katrina had a devastating impact on bottomland hardwood forests in 2005. Artificial regeneration was considered the most appropriate method for reforesting these areas, but few studies have evaluated methods for artificially regenerating oaks on clear cut sites in the southern United States. First-year survival and growth of two oak species, live oak (Quercus...

Reproduction losses from slash disposal at the Challenge Experimental Forest

Treesearch

Dale O. Hall; Robert L. Neal

1963-01-01

Ponderosa pine, the preferred species, accounted for only 15 percent of the residual coniferous reproduction in seed-tree cuttings. Logging slash was machine-piled to encourage pine regeneration. Slash piling reduced the percentage of plots stocked with conifers from 38 to 12 percent. It destroyed 90 percent of the youngest seedlings but only 27 percent of the saplings...

Size of Cottonwood Nursery Stock Related to Seedbed Density and Row Spacing

Treesearch

B. G. Blackmon; J. L. Gammaga

1968-01-01

In areas susceptible to early-season flooding, cottonwood seedlings are thought to be superior to cuttings as planting material arid most tree planters prefer seedlings with root-collar diameters between 0.2 and 0.6 inch for these areas. Seedlings in this diameter range are generally of, acceptable height. The study reported here indicates that production of suitable...

45. WEST TO CIRCA 1900 SHEET METAL SHEAR, THE MACHINE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

45. WEST TO CIRCA 1900 SHEET METAL SHEAR, THE MACHINE USED TO CUT SHEET METAL USED IN WINDMILLS AND WATER TANKS. IN THE BACKGROUND IS THE INTERIOR WEST WALL OF THE FACTORY, ITS SHELVES BEARING WATER PUMPS, PARTS FOR PUMPS AND WATER SUPPLY EQUIPMENT, AND NEW OLD STOCK MERCHANDISE. - Kregel Windmill Company Factory, 1416 Central Avenue, Nebraska City, Otoe County, NE

Highlights of Douglas fir natural regeneration.

Treesearch

Leo A. Isaac

1937-01-01

Enough natural reproduction to produce a fully stocked stand immediately after logging occurs on only a small percentage of the clear-cut and broadcast-burned areas in the Douglas fir region. Studies have been made of the environmental factors that enter into this rather hesitant transition from old forest to new in order to work out a silvicultural system for the type...

Partial Cutting and Establishment of Artificial Nuttall Oak Regeneration in the Mississippi Alluvial Plain

Treesearch

Benjamin P. Ware; Emile S. Gardiner

2004-01-01

In the fall of 1998, we harvested a mixed bottomland hardwood stand in Sharkey County, MS, to establish two replicates of three residual stocking levels (0, 25, and 50 percent). We compared the various stand densities for suitability in establishment and growth of artificial oak regeneration. Following the overstory harvest, treatment plots received chain saw site...

Forest statistics for South Florida, 1988

Treesearch

Mark J. Brown; Michael T. Thompson

1988-01-01

Since 1980, area of timberland in South Florida has decreased by 21 percent to less than 659,000 acres. Area of nonindustrial private forest (NIPF) land has declined to 552,000 acres. Harvests and other cuttings occurred on 2,800 acres annually, while 2,500 acres regenerated each year. Volume of softwood growing stock increased by 19 percent to 558 million cubic feet,...

Economics of thinning stagnated ponderosa pine sapling stands in the pine-grass areas of central Washington.

Treesearch

Robert W. Sassaman; James W. Barrett; Justin G. Smith

1972-01-01

Present net worth values earned by investments in precommercial thinning of stagnated ponderosa pine sapling stands are reported for three stocking levels. Thirteen timber management regimes are ranked by their returns from timber only, and 22 regimes are ranked according to their returns from timber and forage, with and without the allowable cut effect.

Marine reserves solve an important bycatch problem in fisheries

PubMed Central

Hastings, Alan; Gaines, Steven D.; Costello, Christopher

2017-01-01

Management of the diverse fisheries of the world has had mixed success. While managing single species in data-rich environments has been largely effective, perhaps the greatest challenge facing fishery managers is how to deal with mixed stocks of fish with a range of life histories that reside in the same location. Because many fishing gears are nonselective, and the costs of making gear selective can be high, a particular problem is bycatch of weak stocks. This problem is most severe when the weak stock is long-lived and has low fecundity and thus requires a very long recovery time once overfished. We investigate the role that marine reserves might play in solving this challenging and ubiquitous problem in ecosystem-based management. Evidence for marine reserves’ potential to manage fisheries in an ecosystem context has been mixed, so we develop a heuristic strategic mathematical model to obtain general conclusions about the merits of managing multispecies fisheries by using reserves relative to managing them with nonspatial approaches. We show that for many fisheries, yields of strong stocks can be increased, and persistence of weak stocks can be ensured, by using marine reserves rather than by using traditional nonspatial approaches alone. Thus, reserves have a distinct advantage as a management tool in many of the most critical multispecies settings. We also show how the West Coast groundfish fishery of the United States meets these conditions, suggesting that management by reserves may be a superior option in that case. PMID:28794280

Heuristic algorithms for solving of the tool routing problem for CNC cutting machines

NASA Astrophysics Data System (ADS)

Chentsov, P. A.; Petunin, A. A.; Sesekin, A. N.; Shipacheva, E. N.; Sholohov, A. E.

2015-11-01

The article is devoted to the problem of minimizing the path of the cutting tool to shape cutting machines began. This problem can be interpreted as a generalized traveling salesman problem. Earlier version of the dynamic programming method to solve this problem was developed. Unfortunately, this method allows to process an amount not exceeding thirty circuits. In this regard, the task of constructing quasi-optimal route becomes relevant. In this paper we propose options for quasi-optimal greedy algorithms. Comparison of the results of exact and approximate algorithms is given.

A genetic algorithm used for solving one optimization problem

NASA Astrophysics Data System (ADS)

Shipacheva, E. N.; Petunin, A. A.; Berezin, I. M.

2017-12-01

A problem of minimizing the length of the blank run for a cutting tool during cutting of sheet materials into shaped blanks is discussed. This problem arises during the preparation of control programs for computerized numerical control (CNC) machines. A discrete model of the problem is analogous in setting to the generalized travelling salesman problem with limitations in the form of precursor conditions determined by the technological features of cutting. A certain variant of a genetic algorithm for solving this problem is described. The effect of the parameters of the developed algorithm on the solution result for the problem with limitations is investigated.

Cost minimizing of cutting process for CNC thermal and water-jet machines

NASA Astrophysics Data System (ADS)

Tavaeva, Anastasia; Kurennov, Dmitry

2015-11-01

This paper deals with optimization problem of cutting process for CNC thermal and water-jet machines. The accuracy of objective function parameters calculation for optimization problem is investigated. This paper shows that working tool path speed is not constant value. One depends on some parameters that are described in this paper. The relations of working tool path speed depending on the numbers of NC programs frames, length of straight cut, configuration part are presented. Based on received results the correction coefficients for working tool speed are defined. Additionally the optimization problem may be solved by using mathematical model. Model takes into account the additional restrictions of thermal cutting (choice of piercing and output tool point, precedence condition, thermal deformations). At the second part of paper the non-standard cutting techniques are considered. Ones may lead to minimizing of cutting cost and time compared with standard cutting techniques. This paper considers the effectiveness of non-standard cutting techniques application. At the end of the paper the future research works are indicated.

Precise Truss Assembly using Commodity Parts and Low Precision Welding

NASA Technical Reports Server (NTRS)

Komendera, Erik; Reishus, Dustin; Dorsey, John T.; Doggett, William R.; Correll, Nikolaus

2013-01-01

We describe an Intelligent Precision Jigging Robot (IPJR), which allows high precision assembly of commodity parts with low-precision bonding. We present preliminary experiments in 2D that are motivated by the problem of assembling a space telescope optical bench on orbit using inexpensive, stock hardware and low-precision welding. An IPJR is a robot that acts as the precise "jigging", holding parts of a local assembly site in place while an external low precision assembly agent cuts and welds members. The prototype presented in this paper allows an assembly agent (in this case, a human using only low precision tools), to assemble a 2D truss made of wooden dowels to a precision on the order of millimeters over a span on the order of meters. We report the challenges of designing the IPJR hardware and software, analyze the error in assembly, document the test results over several experiments including a large-scale ring structure, and describe future work to implement the IPJR in 3D and with micron precision.

Public and health professionals' misconceptions about the dynamics of body weight gain/loss.

PubMed

Abdel-Hamid, Tarek; Ankel, Felix; Battle-Fisher, Michele; Gibson, Bryan; Gonzalez-Parra, Gilberto; Jalali, Mohammad; Kaipainen, Kirsikka; Kalupahana, Nishan; Karanfil, Ozge; Marathe, Achla; Martinson, Brian; McKelvey, Karma; Sarbadhikari, Suptendra Nath; Pintauro, Stephen; Poucheret, Patrick; Pronk, Nicolaas; Qian, Ying; Sazonov, Edward; Van Oorschot, Kim; Venkitasubramanian, Akshay; Murphy, Philip

2014-01-01

Human body energy storage operates as a stock-and-flow system with inflow (food intake) and outflow (energy expenditure). In spite of the ubiquity of stock-and-flow structures, evidence suggests that human beings fail to understand stock accumulation and rates of change, a difficulty called the stock-flow failure. This study examines the influence of health care training and cultural background in overcoming stock-flow failure. A standardized protocol assessed lay people's and health care professionals' ability to apply stock-and-flow reasoning to infer the dynamics of weight gain/loss during the holiday season (621 subjects from seven countries). Our results indicate that both types of subjects exhibited systematic errors indicative of use of erroneous heuristics. Stock-flow failure was found across cultures and was not improved by professional health training. The problem of stock-flow failure as a transcultural global issue with education and policy implications is discussed.

Deforestation and Carbon Stock Loss in Brazil's Amazonian Settlements.

PubMed

Yanai, Aurora Miho; Nogueira, Euler Melo; de Alencastro Graça, Paulo Maurício Lima; Fearnside, Philip Martin

2017-03-01

We estimate deforestation and the carbon stock in 2740 (82 %) of the 3325 settlements in Brazil's Legal Amazonia region. Estimates are made both using available satellite data and a carbon map for the "pre-modern" period (prior to 1970). We used data from Brazil's Project for Monitoring Deforestation in Amazonia updated through 2013 and from the Brazilian Biomes Deforestation Monitoring Project (PMDBBS) updated through 2010. To obtain the pre-modern and recent carbon stocks we performed an intersection between a carbon map and a map derived from settlement boundaries and deforestation data. Although the settlements analyzed occupied only 8 % of Legal Amazonia, our results indicate that these settlements contributed 17 % (160,410 km 2 ) of total clearing (forest + non-forest) in Legal Amazonia (967,003 km 2 ). This represents a clear-cutting of 41 % of the original vegetation in the settlements. Out of this total, 72 % (115,634 km 2 ) was in the "Federal Settlement Project" (PA) category. Deforestation in settlements represents 20 % (2.6 Pg C) of the total carbon loss in Legal Amazonia (13.1 Pg C). The carbon stock in remaining vegetation represents 3.8 Pg C, or 6 % of the total remaining carbon stock in Legal Amazonia (58.6 Pg C) in the periods analyzed. The carbon reductions in settlements are caused both by the settlers and by external actors. Our findings suggest that agrarian reform policies contributed directly to carbon loss. Thus, the implementation of new settlements should consider potential carbon stock losses, especially if settlements are created in areas with high carbon stocks.

Levels-of-growing-stock cooperative study in Douglas-fir: report no. 17—The Skykomish Study, 1961–93; The Clemons study, 1963–94.

Treesearch

James E. King; David D. Marshall; John F. Bell

2002-01-01

Stand treatments were completed as prescribed with an initial calibration cut and five thinnings resulting in eight new regimes for management of Douglas-fir (Pseudotsuga menziesii (Mirb.) Franco). Measurements were continued for an additional 14 years to observe stability and yields of stands in a postthinning holding period. Detailed descriptions...

The Timber Resources of Connecticut

Treesearch

Norman B. Griswold; Roland H. Ferguson; Roland H. Ferguson

1957-01-01

This is a report on the first comprehensive survey made of the forest resource in Connecticut. It shows the area and condition of the forest land and the volume and quality of standing timber as of January 1, 1953, and the annual growth and mortality of the forest growing stock, and the extent of timber cutting in 1952. The survey was made by the Forest Service, U.S....

2, 4, 5 -T amine not recommended for frill-treating hardwood culls in West Virginia

Treesearch

Harry W. Yawney

1962-01-01

Cull trees and undesirable species may occupy a high percentage of forest growing space. In a managed forest, these unwanted individuals must be cut or killed so that sound vigorous growing stock of good species can utilize the space. The methods most frequently used to eliminate medium to large-size trees from timber stands are either girdling or application of...

An Ensemble of Neural Networks for Stock Trading Decision Making

NASA Astrophysics Data System (ADS)

Chang, Pei-Chann; Liu, Chen-Hao; Fan, Chin-Yuan; Lin, Jun-Lin; Lai, Chih-Ming

Stock turning signals detection are very interesting subject arising in numerous financial and economic planning problems. In this paper, Ensemble Neural Network system with Intelligent Piecewise Linear Representation for stock turning points detection is presented. The Intelligent piecewise linear representation method is able to generate numerous stocks turning signals from the historic data base, then Ensemble Neural Network system will be applied to train the pattern and retrieve similar stock price patterns from historic data for training. These turning signals represent short-term and long-term trading signals for selling or buying stocks from the market which are applied to forecast the future turning points from the set of test data. Experimental results demonstrate that the hybrid system can make a significant and constant amount of profit when compared with other approaches using stock data available in the market.

Clustering of financial time series with application to index and enhanced index tracking portfolio

NASA Astrophysics Data System (ADS)

Dose, Christian; Cincotti, Silvano

2005-09-01

A stochastic-optimization technique based on time series cluster analysis is described for index tracking and enhanced index tracking problems. Our methodology solves the problem in two steps, i.e., by first selecting a subset of stocks and then setting the weight of each stock as a result of an optimization process (asset allocation). Present formulation takes into account constraints on the number of stocks and on the fraction of capital invested in each of them, whilst not including transaction costs. Computational results based on clustering selection are compared to those of random techniques and show the importance of clustering in noise reduction and robust forecasting applications, in particular for enhanced index tracking.

About some types of constraints in problems of routing

NASA Astrophysics Data System (ADS)

Petunin, A. A.; Polishuk, E. G.; Chentsov, A. G.; Chentsov, P. A.; Ukolov, S. S.

2016-12-01

Many routing problems arising in different applications can be interpreted as a discrete optimization problem with additional constraints. The latter include generalized travelling salesman problem (GTSP), to which task of tool routing for CNC thermal cutting machines is sometimes reduced. Technological requirements bound to thermal fields distribution during cutting process are of great importance when developing algorithms for this task solution. These requirements give rise to some specific constraints for GTSP. This paper provides a mathematical formulation for the problem of thermal fields calculating during metal sheet thermal cutting. Corresponding algorithm with its programmatic implementation is considered. The mathematical model allowing taking such constraints into account considering other routing problems is discussed either.

An Integrated Method Based on PSO and EDA for the Max-Cut Problem.

PubMed

Lin, Geng; Guan, Jian

2016-01-01

The max-cut problem is NP-hard combinatorial optimization problem with many real world applications. In this paper, we propose an integrated method based on particle swarm optimization and estimation of distribution algorithm (PSO-EDA) for solving the max-cut problem. The integrated algorithm overcomes the shortcomings of particle swarm optimization and estimation of distribution algorithm. To enhance the performance of the PSO-EDA, a fast local search procedure is applied. In addition, a path relinking procedure is developed to intensify the search. To evaluate the performance of PSO-EDA, extensive experiments were carried out on two sets of benchmark instances with 800 to 20,000 vertices from the literature. Computational results and comparisons show that PSO-EDA significantly outperforms the existing PSO-based and EDA-based algorithms for the max-cut problem. Compared with other best performing algorithms, PSO-EDA is able to find very competitive results in terms of solution quality.

Scenario-based modeling for multiple allocation hub location problem under disruption risk: multiple cuts Benders decomposition approach

NASA Astrophysics Data System (ADS)

Yahyaei, Mohsen; Bashiri, Mahdi

2017-12-01

The hub location problem arises in a variety of domains such as transportation and telecommunication systems. In many real-world situations, hub facilities are subject to disruption. This paper deals with the multiple allocation hub location problem in the presence of facilities failure. To model the problem, a two-stage stochastic formulation is developed. In the proposed model, the number of scenarios grows exponentially with the number of facilities. To alleviate this issue, two approaches are applied simultaneously. The first approach is to apply sample average approximation to approximate the two stochastic problem via sampling. Then, by applying the multiple cuts Benders decomposition approach, computational performance is enhanced. Numerical studies show the effective performance of the SAA in terms of optimality gap for small problem instances with numerous scenarios. Moreover, performance of multi-cut Benders decomposition is assessed through comparison with the classic version and the computational results reveal the superiority of the multi-cut approach regarding the computational time and number of iterations.

Exploiting Elementary Landscapes for TSP, Vehicle Routing and Scheduling

DTIC Science & Technology

2015-09-03

Traveling Salesman Problem (TSP) and Graph Coloring are elementary. Problems such as MAX-kSAT are a superposition of k elementary landscapes. This...search space. Problems such as the Traveling Salesman Problem (TSP), Graph Coloring, the Frequency Assignment Problem , as well as Min-Cut and Max-Cut...echoing our earlier esults on the Traveling Salesman Problem . Using two locally optimal solutions as “parent” solutions, we have developed a

Long-term development of regeneration under longleaf pine seedtree and shelterwood stands

Treesearch

William D. Boyer

1993-01-01

Well-stocked mature longleaf pine (Pinus palustris Mill.) stands were cut tofive residual basal areas in 1957, namely 9,18,2 7.36, and 45 ft2 per ac, to observe the effect of stand density on seed production and seedling establishment. Seedlings, mainly from the 195.5 or 1961 seed crops, were established in treated stands. All pines on net 0.9 ac...

Chickalicious: Want to Woo Reluctant Female Readers? Chick Lit May Be the Ticket

ERIC Educational Resources Information Center

Meloni, Christine

2010-01-01

Five years ago, when the author transferred from a local elementary school to her current position, she took one look at the dismal circulation figures and knew she had her work cut out for her. One of the first things she did was create a graphic novel section to attract young male readers. She also began stocking up on guy-friendly adventure and…

Portfolio optimization and the random magnet problem

NASA Astrophysics Data System (ADS)

Rosenow, B.; Plerou, V.; Gopikrishnan, P.; Stanley, H. E.

2002-08-01

Diversification of an investment into independently fluctuating assets reduces its risk. In reality, movements of assets are mutually correlated and therefore knowledge of cross-correlations among asset price movements are of great importance. Our results support the possibility that the problem of finding an investment in stocks which exposes invested funds to a minimum level of risk is analogous to the problem of finding the magnetization of a random magnet. The interactions for this "random magnet problem" are given by the cross-correlation matrix C of stock returns. We find that random matrix theory allows us to make an estimate for C which outperforms the standard estimate in terms of constructing an investment which carries a minimum level of risk.

Research of a smart cutting tool based on MEMS strain gauge

NASA Astrophysics Data System (ADS)

Zhao, Y.; Zhao, Y. L.; Shao, YW; Hu, T. J.; Zhang, Q.; Ge, X. H.

2018-03-01

Cutting force is an important factor that affects machining accuracy, cutting vibration and tool wear. Machining condition monitoring by cutting force measurement is a key technology for intelligent manufacture. Current cutting force sensors exist problems of large volume, complex structure and poor compatibility in practical application, for these problems, a smart cutting tool is proposed in this paper for cutting force measurement. Commercial MEMS (Micro-Electro-Mechanical System) strain gauges with high sensitivity and small size are adopted as transducing element of the smart tool, and a structure optimized cutting tool is fabricated for MEMS strain gauge bonding. Static calibration results show that the developed smart cutting tool is able to measure cutting forces in both X and Y directions, and the cross-interference error is within 3%. Its general accuracy is 3.35% and 3.27% in X and Y directions, and sensitivity is 0.1 mV/N, which is very suitable for measuring small cutting forces in high speed and precision machining. The smart cutting tool is portable and reliable for practical application in CNC machine tool.

Word of Mouth : An Agent-based Approach to Predictability of Stock Prices

NASA Astrophysics Data System (ADS)

Shimokawa, Tetsuya; Misawa, Tadanobu; Watanabe, Kyoko

This paper addresses how communication processes among investors affect stock prices formation, especially emerging predictability of stock prices, in financial markets. An agent based model, called the word of mouth model, is introduced for analyzing the problem. This model provides a simple, but sufficiently versatile, description of informational diffusion process and is successful in making lucidly explanation for the predictability of small sized stocks, which is a stylized fact in financial markets but difficult to resolve by traditional models. Our model also provides a rigorous examination of the under reaction hypothesis to informational shocks.

A morphological perceptron with gradient-based learning for Brazilian stock market forecasting.

PubMed

Araújo, Ricardo de A

2012-04-01

Several linear and non-linear techniques have been proposed to solve the stock market forecasting problem. However, a limitation arises from all these techniques and is known as the random walk dilemma (RWD). In this scenario, forecasts generated by arbitrary models have a characteristic one step ahead delay with respect to the time series values, so that, there is a time phase distortion in stock market phenomena reconstruction. In this paper, we propose a suitable model inspired by concepts in mathematical morphology (MM) and lattice theory (LT). This model is generically called the increasing morphological perceptron (IMP). Also, we present a gradient steepest descent method to design the proposed IMP based on ideas from the back-propagation (BP) algorithm and using a systematic approach to overcome the problem of non-differentiability of morphological operations. Into the learning process we have included a procedure to overcome the RWD, which is an automatic correction step that is geared toward eliminating time phase distortions that occur in stock market phenomena. Furthermore, an experimental analysis is conducted with the IMP using four complex non-linear problems of time series forecasting from the Brazilian stock market. Additionally, two natural phenomena time series are used to assess forecasting performance of the proposed IMP with other non financial time series. At the end, the obtained results are discussed and compared to results found using models recently proposed in the literature. Copyright © 2011 Elsevier Ltd. All rights reserved.

Relationship between the Porco, Bolivia, Ag-Zn-Pb-Sn deposit and the Porco Caldera

USGS Publications Warehouse

Cunningham, C.G.

1994-01-01

The Porco Ag-Zn-Pb-Sn deposit, a major Ag producer in the 16th century and currently the major Zn producer in Bolivia, consists of a swarm of fissure-filling veins in the newly recognized Porco caldera. The caldera measures 5 km by 3 km and formed in response to the eruption of the 12 Ma crystal-rich dacitic Porco Tuff. The mineralization is associated with, and is probably genetically related to, the 8.6 Ma Huayna Porco stock. The Porco deposit consists of steeply dipping irregular and curvilinear veins that cut the intracaldera Porco Tuff about 1 km east of the Huayna Porco stock. Most of the veins are aligned along the structural margin (ring fracture) of the caldera. The ore deposit is zoned around the Huayna Porco stock. The primary Ag minerals are most abundant in the upper parts of the viens. Fluid inclusions in sphalerite stalactites have homogenization temperatures of about 225??C and salinities of about 8 wt% NaCl equiv. The stalactites and the presence of sparse vapor-rich inclusions suggest deposition of sphalerite under boiling conditions. -from Authors

Multilocus enzyme electrophoresis and cytochrome B gene sequencing-based identification of Leishmania isolates from different foci of cutaneous leishmaniasis in Pakistan.

PubMed

Marco, Jorge D; Bhutto, Abdul M; Soomro, Farooq R; Baloch, Javed H; Barroso, Paola A; Kato, Hirotomo; Uezato, Hiroshi; Katakura, Ken; Korenaga, Masataka; Nonaka, Shigeo; Hashiguchi, Yoshihisa

2006-08-01

Seventeen Leishmania stocks isolated from cutaneous lesions of Pakistani patients were studied by multilocus enzyme electrophoresis and by polymerase chain reaction amplification and sequencing of the cytochrome b (Cyt b) gene. Eleven stocks that expressed nine zymodemes were assigned to L. (Leishmania) major. All of them were isolated from patients in the lowlands of Larkana district and Sibi city in Sindh and Balochistan provinces, respectively. The remaining six, distributed in two zymodemes (five and one), isolated from the highland of Quetta city, Balochistan, were identified as L. (L.) tropica. The same result at species level was obtained by the Cyt b sequencing for all the stocks examined. No clear-cut association between the clinical features (wet or dry type lesions) and the Leishmania species involved was found. Leishmania (L.) major was highly polymorphic compared with L. (L.) tropica. This difference may be explained by the fact that humans may act as a sole reservoir of L. (L.) tropica in anthroponotic cycles; however, many wild mammals can be reservoirs of L. (L.) major in zoonotic cycles.

Comparison of Numerical Modeling Methods for Soil Vibration Cutting

NASA Astrophysics Data System (ADS)

Jiang, Jiandong; Zhang, Enguang

2018-01-01

In this paper, we studied the appropriate numerical simulation method for vibration soil cutting. Three numerical simulation methods, commonly used for uniform speed soil cutting, Lagrange, ALE and DEM, are analyzed. Three models of vibration soil cutting simulation model are established by using ls-dyna.The applicability of the three methods to this problem is analyzed in combination with the model mechanism and simulation results. Both the Lagrange method and the DEM method can show the force oscillation of the tool and the large deformation of the soil in the vibration cutting. Lagrange method shows better effect of soil debris breaking. Because of the poor stability of ALE method, it is not suitable to use soil vibration cutting problem.

HIV antiretroviral medication stock-outs in Ghana: contributors and consequences.

PubMed

Poku, Rebecca A; Owusu, Adobea Yaa; Mullen, Patricia Dolan; Markham, Christine; McCurdy, Sheryl A

2017-09-01

Drug stock-outs are an unfortunate yet common reality for patients living in low and middle income countries, particularly in sub-Saharan Africa where trouble with consistent stock of antiretroviral medications (ARVs) continues. Our study takes a snapshot of this problem in Ghana. Although the country launched its antiretroviral therapy (ART) programme in 2003, progress toward realising the full benefit of ART for treated individuals has been limited, in part, because of stock-outs. In Ghana's Greater Accra region, we conducted semi-structured interviews with 40 women living with HIV (WLHIV) and 15 individuals with a history of HIV-related work in government or non-governmental organisations, or healthcare facilities. We used repeated review with coding and mapping techniques to analyse the transcripts and identify common themes. Stock-outs of ARVs result in inconsistent administration of therapy, increased indirect medical costs for WLHIV, and negative labelling of patients. Inefficiencies in drug supply, poor coordination with port authorities, inadequate government funding and dependence on international aid contribute to the stock-outs experienced in Ghana. Although using ARVs produced in-country could reduce supply problems, the domestically-manufactured product currently does not meet World Health Organization (WHO) standards. We recommend focused efforts to produce WHO standard ARVs in Ghana, and a review of current supply chain management to identify and mend pitfalls in the system.

The adaptive, cut-cell Cartesian approach (warts and all)

NASA Technical Reports Server (NTRS)

Powell, Kenneth G.

1995-01-01

Solution-adaptive methods based on cutting bodies out of Cartesian grids are gaining popularity now that the ways of circumventing the accuracy problems associated with small cut cells have been developed. Researchers are applying Cartesian-based schemes to a broad class of problems now, and, although there is still development work to be done, it is becoming clearer which problems are best suited to the approach (and which are not). The purpose of this paper is to give a candid assessment, based on applying Cartesian schemes to a variety of problems, of the strengths and weaknesses of the approach as it is currently implemented.

The Timber Resources of Delaware. A Report on tbe Forest survey made by the U.S. Forest Service.

Treesearch

Roland H. Ferguson; Roland H. Ferguson

1959-01-01

This is a report on the findings of the first comprehensive survey of the timber resources of Delaware. It describes, as of 1957, the area and condition of the forest land, the volume of standing timber, the annual growth and mortality of the forest growing stock, and the extent of timber cutting. The survey made by the Forest Service, U.S. Department of Agriculture,...

Rehabilitation of Understocked Loblolly-Shortleaf Pine Stands - II. Development of Intermediate and Suppressed Trees Following Release in Natural Stands

Treesearch

James B. Baker; Michael G. Shelton

1998-01-01

Development of 86 intermediate and suppressed loblolly pine (Pinus taeda L.) trees, that had been recently released from overtopping pines and hardwoods, was monitored over a 15 year period. The trees were growing in natural stands on good sites (site index = 90 ft at 50 years) that had been recently cut to stocking levels ranging from 10 to 50 percent. At time of...

Influence of managed pine stands and mixed pine/hardwood stands on well being of deer

Treesearch

Lowell K. Halls; Charles E. Boyd

1982-01-01

A 172-acre enclosure where all the hardwood trees were removed or deadened and a 167 -acre enclosure where hardwoods comprised 25 percent of the tree basal area were each stocked in 1965 with 3 white-tailed deer (1 buck and 2 does). In 1963, before any timber cutting practices were imposed, tree basal area averaged 111 sq. ft. per acre and forage yields averaged 260...

Easily Processed Host-Guest Polymer Systems with High-Tg Characteristics (First-year Report)

DTIC Science & Technology

2012-05-01

manner such that the effective electro- optical coefficient is maximized. Unfortunately, relaxation of the chromophore in the host polymer leads to...polished stainless steel facing plates (0.25 in thickness, McMaster ) and window molds cut from aluminum stock (1 mm thickness, McMaster ). Both facing...plasticization from the chromophore. Both chromophores resulted in substantial red-shifted absorption compared to a sample prepared in virgin PMMA. We expect

Strategic Management Plan. FY11

DTIC Science & Technology

2010-12-30

process flows . Many of the improvements sought in this SMP require us to think about our business operations from an end-to-end perspective because the...underlying processes cut across many of our traditional organizations and functional business areas. The 15 end-to-end process flows that were...Redeployment/ Retrograde • Environmental Liabilities • Hire-to-Retire (H2R) • Market-to-Prospect (M2P) • Order-to- Cash (O2C) • Plan-to-Stock

Wild-derived mouse stocks: an underappreciated tool for aging research

PubMed Central

2008-01-01

Virtually all biomedical research makes use of a relatively small pool of laboratory-adapted, inbred, isogenic stocks of mice. Although the advantages of these models are many, there are a number of disadvantages as well. When studying a multifaceted process such as aging, the problems associated with using laboratory stocks are greatly inflated. On the other hand, wild-derived mouse stocks, loosely defined here as either wild-caught individuals or the recent progeny of wild-caught individuals, have much to offer to biogerontology research. Hence, the aims of this review are threefold: (1) to (re)acquaint readers with the pros and cons of using a typical inbred laboratory mouse model for aging research; (2) to reintroduce the notion of using wild-derived mouse stocks in aging research as championed by Austad, Miller and others for more than a decade, and (3) to provide an overview of recent advances in biogerontology using wild-derived mouse stocks. PMID:19424863

Constraint Optimization Problem For The Cutting Of A Cobalt Chrome Refractory Material

NASA Astrophysics Data System (ADS)

Lebaal, Nadhir; Schlegel, Daniel; Folea, Milena

2011-05-01

This paper shows a complete approach to solve a given problem, from the experimentation to the optimization of different cutting parameters. In response to an industrial problem of slotting FSX 414, a Cobalt-based refractory material, we have implemented a design of experiment to determine the most influent parameters on the tool life, the surface roughness and the cutting forces. After theses trials, an optimization approach has been implemented to find the lowest manufacturing cost while respecting the roughness constraints and cutting force limitation constraints. The optimization approach is based on the Response Surface Method (RSM) using the Sequential Quadratic programming algorithm (SQP) for a constrained problem. To avoid a local optimum and to obtain an accurate solution at low cost, an efficient strategy, which allows improving the RSM accuracy in the vicinity of the global optimum, is presented. With these models and these trials, we could apply and compare our optimization methods in order to get the lowest cost for the best quality, i.e. a satisfying surface roughness and limited cutting forces.

Who should set CEO pay? The press? Congress? Shareholders?

PubMed

Brownstein, A R; Panner, M J

1992-01-01

Populist fervor in an election year has transformed executive compensation from a business issue into a political one. Critics, led by Graef Crystal, author of In Search of Excess: The Overcompensation of American Executives, charge that CEOs are ripping off shareholders with their outrageous salaries while running U.S. corporations into the ground. Politicians claim overpaid CEOs are the root cause of the U.S. competitiveness problem. Add a recessionary business climate to the fact that some CEOs earn 130 times more than their lowest paid employees, and you have the makings of a populist rebellion. In a bid to appease voters, Congress is considering several bills that would limit the deductibility of "excessive executive salaries," the SEC has opened the issue to shareholder comment, and the Financial Accounting Standards Board is looking at new accounting standards for granting stock options to executives as part of company compensation schemes. Andrew R. Brownstein and Morris J. Panner say it's time to put the debate back where it belongs--in a business context. The real question is not are executives paid too much, but are shareholders getting their money's worth. Most U.S. corporations use stock compensation to link company long-term performance to executive salaries. And because of the staggering market performance of U.S. corporations in the 1980s, an overwhelming majority of CEOs are actually paid in line with their performance. Rather than cut executive pay, Brownstein and Panner suggest that corporations extend incentive-based compensation plans to all employees, thus narrowing the salary gap and establishing pay for performance at every level of the organization.

NASA cancels carbon monitoring research program

NASA Astrophysics Data System (ADS)

Voosen, Paul

2018-05-01

The administration of President Donald Trump has waged a broad attack on climate science conducted by NASA, including proposals to cut the budget of earth science research and kill off the Orbiting Carbon Observatory 3 mission. Congress has fended these attacks off—with one exception. NASA has moved ahead with plans to end the Carbon Monitoring System, a $10-million-a-year research line that has helped stitch together observations of sources and sinks of methane and carbon dioxide into high-resolution models of the planet's flows of carbon, the agency confirmed to Science. The program, begun in 2010, has developed tools to improve estimates of carbon stocks in forests, especially, from Alaska to Indonesia. Ending it, researchers say, will complicate future efforts to monitor and verify national emission cuts stemming from the Paris climate deal.

Sugeno-Fuzzy Expert System Modeling for Quality Prediction of Non-Contact Machining Process

NASA Astrophysics Data System (ADS)

Sivaraos; Khalim, A. Z.; Salleh, M. S.; Sivakumar, D.; Kadirgama, K.

2018-03-01

Modeling can be categorised into four main domains: prediction, optimisation, estimation and calibration. In this paper, the Takagi-Sugeno-Kang (TSK) fuzzy logic method is examined as a prediction modelling method to investigate the taper quality of laser lathing, which seeks to replace traditional lathe machines with 3D laser lathing in order to achieve the desired cylindrical shape of stock materials. Three design parameters were selected: feed rate, cutting speed and depth of cut. A total of twenty-four experiments were conducted with eight sequential runs and replicated three times. The results were found to be 99% of accuracy rate of the TSK fuzzy predictive model, which suggests that the model is a suitable and practical method for non-linear laser lathing process.

Stock Market Index Data and indicators for Day Trading as a Binary Classification problem.

PubMed

Bruni, Renato

2017-02-01

Classification is the attribution of labels to records according to a criterion automatically learned from a training set of labeled records. This task is needed in a huge number of practical applications, and consequently it has been studied intensively and several classification algorithms are available today. In finance, a stock market index is a measurement of value of a section of the stock market. It is often used to describe the aggregate trend of a market. One basic financial issue would be forecasting this trend. Clearly, such a stochastic value is very difficult to predict. However, technical analysis is a security analysis methodology developed to forecast the direction of prices through the study of past market data. Day trading consists in buying and selling financial instruments within the same trading day. In this case, one interesting problem is the automatic individuation of favorable days for trading. We model this problem as a binary classification problem, and we provide datasets containing daily index values, the corresponding values of a selection of technical indicators, and the class label, which is 1 if the subsequent time period is favorable for day trading and 0 otherwise. These datasets can be used to test the behavior of different approaches in solving the day trading problem.

Graph-cut based discrete-valued image reconstruction.

PubMed

Tuysuzoglu, Ahmet; Karl, W Clem; Stojanovic, Ivana; Castañòn, David; Ünlü, M Selim

2015-05-01

Efficient graph-cut methods have been used with great success for labeling and denoising problems occurring in computer vision. Unfortunately, the presence of linear image mappings has prevented the use of these techniques in most discrete-amplitude image reconstruction problems. In this paper, we develop a graph-cut based framework for the direct solution of discrete amplitude linear image reconstruction problems cast as regularized energy function minimizations. We first analyze the structure of discrete linear inverse problem cost functions to show that the obstacle to the application of graph-cut methods to their solution is the variable mixing caused by the presence of the linear sensing operator. We then propose to use a surrogate energy functional that overcomes the challenges imposed by the sensing operator yet can be utilized efficiently in existing graph-cut frameworks. We use this surrogate energy functional to devise a monotonic iterative algorithm for the solution of discrete valued inverse problems. We first provide experiments using local convolutional operators and show the robustness of the proposed technique to noise and stability to changes in regularization parameter. Then we focus on nonlocal, tomographic examples where we consider limited-angle data problems. We compare our technique with state-of-the-art discrete and continuous image reconstruction techniques. Experiments show that the proposed method outperforms state-of-the-art techniques in challenging scenarios involving discrete valued unknowns.

Carbon stocks and greenhouse gas balance of an old-growth forest and an anthropogenic peatland in southern Chile

NASA Astrophysics Data System (ADS)

Perez-Quezada, J. F.; Brito, C. E.; Valdés, A.; Urrutia, P.

2016-12-01

Few studies have reported the effects of deforestation on carbon stocks and greenhouse gas balance in the temperate forests of the southern hemisphere. In some areas of southern Chile, after clear-cut or forest fires occurs a proliferation of Sphagnum moss, generating an anthropogenic type of peatland. We measured the effects of this change on the carbon stocks and the greenhouse gas balance, starting in 2013. Carbon stocks were measured in >30 plots on each site; ecosystem CO2 fluxes were measured continuously using eddy covariance stations; CH4 and N2O fluxes were measured monthly using closed chambers and cavity ring-down spectroscopy technology. Total ecosystem carbon stock was 1,523 Mg ha-1 in the forest and 130 Mg ha-1 in the peatland, representing a 91% difference. Both land use types were found to act as sinks of CO2 (NEE=-1094.2 and -31.9 g CO2 m-2 year-¹ for the forest and peatland, respectively); CH4 was mainly captured in the forest and peatland soils, generating balances of -0.70 and -0.12 g CH₄ m-2 year-¹. N2O fluxes were extremely low, so were considered as null. These results indicate that the greenhouse gas balance moved from -1134.6 to -38.8 g CO2-eq m-2 year-1 when land use changed from forest to anthropogenic peatland. These results provide evidence of the importance of preserving old-growth forests in southern Chile.

Film Editing Handbook; Technique of 16mm Film Cutting.

ERIC Educational Resources Information Center

Churchill, Hugh B.

Designed to help the film student with the complexities of 16mm film cutting, this handbook catalogs the mechanical procedures of both picture and sound cutting and supplies step-by-step explanations of these procedures. Because the handbook was organized so that it could be used while working at the cutting bench, common cutting problems and…

Precise Truss Assembly Using Commodity Parts and Low Precision Welding

NASA Technical Reports Server (NTRS)

Komendera, Erik; Reishus, Dustin; Dorsey, John T.; Doggett, W. R.; Correll, Nikolaus

2014-01-01

Hardware and software design and system integration for an intelligent precision jigging robot (IPJR), which allows high precision assembly using commodity parts and low-precision bonding, is described. Preliminary 2D experiments that are motivated by the problem of assembling space telescope optical benches and very large manipulators on orbit using inexpensive, stock hardware and low-precision welding are also described. An IPJR is a robot that acts as the precise "jigging", holding parts of a local structure assembly site in place, while an external low precision assembly agent cuts and welds members. The prototype presented in this paper allows an assembly agent (for this prototype, a human using only low precision tools), to assemble a 2D truss made of wooden dowels to a precision on the order of millimeters over a span on the order of meters. The analysis of the assembly error and the results of building a square structure and a ring structure are discussed. Options for future work, to extend the IPJR paradigm to building in 3D structures at micron precision are also summarized.

Jet fuel property changes and their effect on producibility and cost in the U.S., Canada, and Europe

NASA Technical Reports Server (NTRS)

Varga, G. M., Jr.; Avella, A. J., Jr.; Cunningham, A. R.; Featherston, C. D.; Gorgol, J. F.; Graf, A. J.; Lieberman, M.; Oliver, G. A.

1985-01-01

The effects of changes in properties and blending stocks on the refinery output and cost of jet fuel in the U.S., Canada, and Europe were determined. Computerized refinery models that minimize production costs and incorporated a 1981 cost structure and supply/demand projections to the year 2010 were used. Except in the West U.S., no changes in jet fuel properties were required to meet all projected demands, even allowing for deteriorating crude qualities and changes in competing product demand. In the West U.S., property changes or the use of cracked blendstocks were projected to be required after 1990 to meet expected demand. Generally, relaxation of aromatics and freezing point, or the use of cracked stocks produced similar results, i.e., jet fuel output could be increased by up to a factor of three or its production cost lowered by up to $10/cu m. High quality hydrocracked stocks are now used on a limited basis to produce jet fuel. The conversion of U.S. and NATO military forces from wide-cut to kerosene-based jet fuel is addressed. This conversion resulted in increased costs of several hundred million dollars annually. These costs can be reduced by relaxing kerosene jet fuel properties, using cracked stocks and/or considering the greater volumetric energy content of kerosene jet fuel.

Residual Stand Quality Following Implementation of Uneven-Aged Silviculture in Even-Aged Oak-Hickory Forests in the Boston Mountains of Arkansas

Treesearch

Martin A. Spetich; David L. Graney; Paul A. Murphy

1999-01-01

A test of group-selection and single-tree selection was installed in 80-year-old even-aged oak-hickory stands in the Boston Mountains of northern Arkansas. Twenty-four 11-acre plots were installed in well stocked stands representing north or east and south or west aspects. Stands between group openings were cut to residual basal areas of 65 and 85 ft2...

General properties of solutions to inhomogeneous Black-Scholes equations with discontinuous maturity payoffs

NASA Astrophysics Data System (ADS)

O, Hyong-Chol; Jo, Jong-Jun; Kim, Ji-Sok

2016-02-01

We provide representations of solutions to terminal value problems of inhomogeneous Black-Scholes equations and study such general properties as min-max estimates, gradient estimates, monotonicity and convexity of the solutions with respect to the stock price variable, which are important for financial security pricing. In particular, we focus on finding representation of the gradient (with respect to the stock price variable) of solutions to the terminal value problems with discontinuous terminal payoffs or inhomogeneous terms. Such terminal value problems are often encountered in pricing problems of compound-like options such as Bermudan options or defaultable bonds with discrete default barrier, default intensity and endogenous default recovery. Our results can be used in pricing real defaultable bonds under consideration of existence of discrete coupons or taxes on coupons.

Stock management in hospital pharmacy using chance-constrained model predictive control.

PubMed

Jurado, I; Maestre, J M; Velarde, P; Ocampo-Martinez, C; Fernández, I; Tejera, B Isla; Prado, J R Del

2016-05-01

One of the most important problems in the pharmacy department of a hospital is stock management. The clinical need for drugs must be satisfied with limited work labor while minimizing the use of economic resources. The complexity of the problem resides in the random nature of the drug demand and the multiple constraints that must be taken into account in every decision. In this article, chance-constrained model predictive control is proposed to deal with this problem. The flexibility of model predictive control allows taking into account explicitly the different objectives and constraints involved in the problem while the use of chance constraints provides a trade-off between conservativeness and efficiency. The solution proposed is assessed to study its implementation in two Spanish hospitals. Copyright © 2015 Elsevier Ltd. All rights reserved.

ℓ(p)-Norm multikernel learning approach for stock market price forecasting.

PubMed

Shao, Xigao; Wu, Kun; Liao, Bifeng

2012-01-01

Linear multiple kernel learning model has been used for predicting financial time series. However, ℓ(1)-norm multiple support vector regression is rarely observed to outperform trivial baselines in practical applications. To allow for robust kernel mixtures that generalize well, we adopt ℓ(p)-norm multiple kernel support vector regression (1 ≤ p < ∞) as a stock price prediction model. The optimization problem is decomposed into smaller subproblems, and the interleaved optimization strategy is employed to solve the regression model. The model is evaluated on forecasting the daily stock closing prices of Shanghai Stock Index in China. Experimental results show that our proposed model performs better than ℓ(1)-norm multiple support vector regression model.

An adaptive simplex cut-cell method for high-order discontinuous Galerkin discretizations of elliptic interface problems and conjugate heat transfer problems

NASA Astrophysics Data System (ADS)

Sun, Huafei; Darmofal, David L.

2014-12-01

In this paper we propose a new high-order solution framework for interface problems on non-interface-conforming meshes. The framework consists of a discontinuous Galerkin (DG) discretization, a simplex cut-cell technique, and an output-based adaptive scheme. We first present a DG discretization with a dual-consistent output evaluation for elliptic interface problems on interface-conforming meshes, and then extend the method to handle multi-physics interface problems, in particular conjugate heat transfer (CHT) problems. The method is then applied to non-interface-conforming meshes using a cut-cell technique, where the interface definition is completely separate from the mesh generation process. No assumption is made on the interface shape (other than Lipschitz continuity). We then equip our strategy with an output-based adaptive scheme for an accurate output prediction. Through numerical examples, we demonstrate high-order convergence for elliptic interface problems and CHT problems with both smooth and non-smooth interface shapes.

Attitudes and opinions of nursing and medical staff regarding the supply and storage of medicinal products before and after the installation of a drawer-based automated stock-control system.

PubMed

Ardern-Jones, Joanne; Hughes, Donald K; Rowe, Philip H; Mottram, David R; Green, Christopher F

2009-04-01

This study assessed the attitudes of Emergency Department (ED) staff regarding the introduction of an automated stock-control system. The objectives were to determine attitudes to stock control and replenishment, speed of access to the system, ease of use and the potential for future uses of the system. The study was carried out in the Countess of Chester Hospital NHS Foundation Trust (COCH) ED, which is attended by over 65,000 patients each year. All 68 ED staff were sent pre-piloted, semi-structured questionnaires and reminders, before and after automation of medicines stock control. Pre-implementation, 35 staff (66.1% of respondents) reported that problems occurred with access to medicine storage keys 'very frequently' or 'frequently'. Twenty-eight (52.8%) respondents 'agreed' or 'strongly agreed' that medicines were quickly accessed, which rose to 41 (77%) post-automation (P < 0.001). Improvement was reported in stock replenishment and storage of stock injections and oral medicines, but there were mixed opinions regarding storage of bulk fluids and refrigerated items. Twenty-seven (51.9%) staff reported access to the system within 1 min and 17 (32.7%) staff reported access within 1-2 min. The majority of staff found the system 'easy' or 'very easy' to use and there was a non-significant relationship between previous use of information technology and acceptance of the system. From a staff satisfaction perspective, automation improved medicines storage, security and stock control, and addressed the problem of searching for keys to storage areas. Concerns over familiarity with computers, queuing, speed of access and an improved audit trail do not appear to have been issues, when compared with the previous manual storage of medicines.

Management of complications associated with lathe-cut soft contact lenses.

PubMed

Freeman, M I

1979-06-01

At the present time, nine lathe-cut lenses are FDA approved and commercially available in the United States. Complications of lathe-cut soft contact lenses cover a wide spectrum of problems. Five significant complications of lathe-cut lenses and their prevention and therapeutic management are discussed.

Traffic routing for multicomputer networks with virtual cut-through capability

NASA Technical Reports Server (NTRS)

Kandlur, Dilip D.; Shin, Kang G.

1992-01-01

Consideration is given to the problem of selecting routes for interprocess communication in a network with virtual cut-through capability, while balancing the network load and minimizing the number of times that a message gets buffered. An approach is proposed that formulates the route selection problem as a minimization problem with a link cost function that depends upon the traffic through the link. The form of this cost function is derived using the probability of establishing a virtual cut-through route. The route selection problem is shown to be NP-hard, and an algorithm is developed to incrementally reduce the cost by rerouting the traffic. The performance of this algorithm is exemplified by two network topologies: the hypercube and the C-wrapped hexagonal mesh.

Stock price forecasting for companies listed on Tehran stock exchange using multivariate adaptive regression splines model and semi-parametric splines technique

NASA Astrophysics Data System (ADS)

Rounaghi, Mohammad Mahdi; Abbaszadeh, Mohammad Reza; Arashi, Mohammad

2015-11-01

One of the most important topics of interest to investors is stock price changes. Investors whose goals are long term are sensitive to stock price and its changes and react to them. In this regard, we used multivariate adaptive regression splines (MARS) model and semi-parametric splines technique for predicting stock price in this study. The MARS model as a nonparametric method is an adaptive method for regression and it fits for problems with high dimensions and several variables. semi-parametric splines technique was used in this study. Smoothing splines is a nonparametric regression method. In this study, we used 40 variables (30 accounting variables and 10 economic variables) for predicting stock price using the MARS model and using semi-parametric splines technique. After investigating the models, we select 4 accounting variables (book value per share, predicted earnings per share, P/E ratio and risk) as influencing variables on predicting stock price using the MARS model. After fitting the semi-parametric splines technique, only 4 accounting variables (dividends, net EPS, EPS Forecast and P/E Ratio) were selected as variables effective in forecasting stock prices.

Concurrence of the strengths and difficulties questionnaire and developmental behaviour checklist among children with an intellectual disability.

PubMed

Rice, L J; Emerson, E; Gray, K M; Howlin, P; Tonge, B J; Warner, G L; Einfeld, S L

2018-02-01

The Strengths and Difficulties Questionnaire (SDQ) is widely used to measure emotional and behavioural problems in typically developing young people, although there is some evidence that it may also be suitable for children with intellectual disability (ID). The Developmental Behaviour Checklist - Parent version (DBC-P) is a measure of emotional and behavioural problems that was specifically designed for children and adolescents with an ID. The DBC-P cut-off has high agreement with clinical diagnosis. The aim of this study was to estimate the relationship between DBC-P and SDQ scores in a sample of children with ID. Parents of 83 young people with ID aged 4-17 years completed the parent versions of the SDQ and the DBC-P. We evaluated the concurrent validity of the SDQ and DBC-P total scores, and the agreement between the DBC-P cut-off and the SDQ cut-offs for 'borderline' and 'abnormal' behaviour. The SDQ total difficulties score correlated well with the DBC-P total behaviour problem score. Agreement between the SDQ borderline cut-off and the DBC-P cut-off for abnormality was high (83%), but was lower for the SDQ abnormal cut-off (75%). Positive agreement between the DBC-P and the SDQ borderline cut-off was also high, with the SDQ borderline cut-off identifying 86% of those who met the DBC-P criterion. Negative agreement was weaker, with the SDQ borderline cut-off identifying only 79% of the participants who did not meet the DBC-P cut-off. The SDQ borderline cut-off has some validity as a measure of overall levels of behavioural and emotional problems in young people with ID, and may be useful in epidemiological studies that include participants with and without ID. However, where it is important to focus on behavioural profiles in children with ID, a specialised ID instrument with established psychometric properties, such as the DBC-P, may provide more reliable and valid information. © 2017 MENCAP and International Association of the Scientific Study of Intellectual and Developmental Disabilities and John Wiley & Sons Ltd.

Microscopic Spin Model for the STOCK Market with Attractor Bubbling on Regular and Small-World Lattices

NASA Astrophysics Data System (ADS)

Krawiecki, A.

A multi-agent spin model for changes of prices in the stock market based on the Ising-like cellular automaton with interactions between traders randomly varying in time is investigated by means of Monte Carlo simulations. The structure of interactions has topology of a small-world network obtained from regular two-dimensional square lattices with various coordination numbers by randomly cutting and rewiring edges. Simulations of the model on regular lattices do not yield time series of logarithmic price returns with statistical properties comparable with the empirical ones. In contrast, in the case of networks with a certain degree of randomness for a wide range of parameters the time series of the logarithmic price returns exhibit intermittent bursting typical of volatility clustering. Also the tails of distributions of returns obey a power scaling law with exponents comparable to those obtained from the empirical data.

A Technical Analysis Information Fusion Approach for Stock Price Analysis and Modeling

NASA Astrophysics Data System (ADS)

Lahmiri, Salim

In this paper, we address the problem of technical analysis information fusion in improving stock market index-level prediction. We present an approach for analyzing stock market price behavior based on different categories of technical analysis metrics and a multiple predictive system. Each category of technical analysis measures is used to characterize stock market price movements. The presented predictive system is based on an ensemble of neural networks (NN) coupled with particle swarm intelligence for parameter optimization where each single neural network is trained with a specific category of technical analysis measures. The experimental evaluation on three international stock market indices and three individual stocks show that the presented ensemble-based technical indicators fusion system significantly improves forecasting accuracy in comparison with single NN. Also, it outperforms the classical neural network trained with index-level lagged values and NN trained with stationary wavelet transform details and approximation coefficients. As a result, technical information fusion in NN ensemble architecture helps improving prediction accuracy.

Finite pure integer programming algorithms employing only hyperspherically deduced cuts

NASA Technical Reports Server (NTRS)

Young, R. D.

1971-01-01

Three algorithms are developed that may be based exclusively on hyperspherically deduced cuts. The algorithms only apply, therefore, to problems structured so that these cuts are valid. The algorithms are shown to be finite.

Potential applications of immunoassays in studies of flatfish recruitment

NASA Astrophysics Data System (ADS)

Feller, Robert J.

The fisheries recruitment-stock problem, a lack of correlation between measures of reproductive output of the parent stock and recruitment to the fishery, has several potential biotic and abiotic causes. Immunoassays may be useful in examining several aspects of this and several other problems in flatfish ecology: stock identification, parasitism and disease, and trophic interactions. Given stage-specific antisera capable of recognozing antigenic moieties of, for instance, eggs, larvae, or newly-settled juveniles, it is possible to screen stomach contents of many putative predators ( e.g., shrimp or crabs) rapidly for the presence and amounts of platfish prey. This trophic application of immunological methods has great promise for measuring loss of potential recruits to predation. All immunoassays are limited by the quality of antisera used and the researcher's ability to interpret quantitative data in an ecologically meaningful way. Key references for applications of immunoassays in fish-related questions are provided with recommendations for their utilization.

Laser cutting of sodium silicate glasses

NASA Astrophysics Data System (ADS)

Buchanov, V. V.; Kazarian, M. A.; Kustov, M. E.; Mashir, Yu. I.; Murav'ev, E. N.; Revenko, V. I.; Solinov, E. F.

2018-04-01

The problems of through laser cutting of sodium silicate glasses by laser-controlled thermal cleavage are considered. A wide variety of obtained end face shapes is demonstrated. It is shown that the strength of glass samples cut by the laser is about two times higher than that of samples cut by a glass cutter.

Mountain pine beetle-caused tree mortality in partially cut plots surrounded by unmanaged stands

Treesearch

J. M. Schmid; S. A. Mata

2005-01-01

Mountain pine beetle activity was monitored in one set of 2.5 acre plots in the southern portion of the Black Hills National Forest over a 17-year period. Beetles attacked 77 percent of the trees in the uncut control, 48 percent of the trees in the growing stock level (GSL) 100/110, 53 percent of the trees in the GSL 80/90, and 9 percent of the trees in the GSL 60/70....

ℓ p-Norm Multikernel Learning Approach for Stock Market Price Forecasting

PubMed Central

Shao, Xigao; Wu, Kun; Liao, Bifeng

2012-01-01

Linear multiple kernel learning model has been used for predicting financial time series. However, ℓ 1-norm multiple support vector regression is rarely observed to outperform trivial baselines in practical applications. To allow for robust kernel mixtures that generalize well, we adopt ℓ p-norm multiple kernel support vector regression (1 ≤ p < ∞) as a stock price prediction model. The optimization problem is decomposed into smaller subproblems, and the interleaved optimization strategy is employed to solve the regression model. The model is evaluated on forecasting the daily stock closing prices of Shanghai Stock Index in China. Experimental results show that our proposed model performs better than ℓ 1-norm multiple support vector regression model. PMID:23365561

Path Planning For A Class Of Cutting Operations

NASA Astrophysics Data System (ADS)

Tavora, Jose

1989-03-01

Optimizing processing time in some contour-cutting operations requires solving the so-called no-load path problem. This problem is formulated and an approximate resolution method (based on heuristic search techniques) is described. Results for real-life instances (clothing layouts in the apparel industry) are presented and evaluated.

Multilayer Stock Forecasting Model Using Fuzzy Time Series

PubMed Central

Javedani Sadaei, Hossein; Lee, Muhammad Hisyam

2014-01-01

After reviewing the vast body of literature on using FTS in stock market forecasting, certain deficiencies are distinguished in the hybridization of findings. In addition, the lack of constructive systematic framework, which can be helpful to indicate direction of growth in entire FTS forecasting systems, is outstanding. In this study, we propose a multilayer model for stock market forecasting including five logical significant layers. Every single layer has its detailed concern to assist forecast development by reconciling certain problems exclusively. To verify the model, a set of huge data containing Taiwan Stock Index (TAIEX), National Association of Securities Dealers Automated Quotations (NASDAQ), Dow Jones Industrial Average (DJI), and S&P 500 have been chosen as experimental datasets. The results indicate that the proposed methodology has the potential to be accepted as a framework for model development in stock market forecasts using FTS. PMID:24605058

Reducing Stock-Outs of Life Saving Malaria Commodities Using Mobile Phone Text-Messaging: SMS for Life Study in Kenya

PubMed Central

Githinji, Sophie; Kigen, Samwel; Memusi, Dorothy; Nyandigisi, Andrew; Mbithi, Agneta M.; Wamari, Andrew; Muturi, Alex N.; Jagoe, George; Barrington, Jim; Snow, Robert W.; Zurovac, Dejan

2013-01-01

Background Health facility stock-outs of life saving malaria medicines are common across Africa. Innovative ways of addressing this problem are urgently required. We evaluated whether SMS based reporting of stocks of artemether-lumefantrine (AL) and rapid diagnostic tests (RDT) can result in reduction of stock-outs at peripheral facilities in Kenya. Methods/Findings All 87 public health facilities in five Kenyan districts were included in a 26 week project. Weekly facility stock counts of four AL packs and RDTs were sent via structured incentivized SMS communication process from health workers’ personal mobile phones to a web-based system accessed by district managers. The mean health facility response rate was 97% with a mean formatting error rate of 3%. Accuracy of stock count reports was 79% while accuracy of stock-out reports was 93%. District managers accessed the system 1,037 times at an average of eight times per week. The system was accessed in 82% of the study weeks. Comparing weeks 1 and 26, stock-out of one or more AL packs declined by 38 percentage-points. Total AL stock-out declined by 5 percentage-points and was eliminated by the end of the project. Stock-out declines of individual AL packs ranged from 14 to 32 percentage-points while decline in RDT stock-outs was 24 percentage-points. District managers responded to 44% of AL and 73% of RDT stock-out signals by redistributing commodities between facilities. In comparison with national trends, stock-out declines in study areas were greater, sharper and more sustained. Conclusions Use of simple SMS technology ensured high reporting rates of reasonably accurate, real-time facility stock data that were used by district managers to undertake corrective actions to reduce stock-outs. Future work on stock monitoring via SMS should focus on assessing response rates without use of incentives and demonstrating effectiveness of such interventions on a larger scale. PMID:23349786

Comparison between goal programming and cointegration approaches in enhanced index tracking

NASA Astrophysics Data System (ADS)

Lam, Weng Siew; Jamaan, Saiful Hafizah Hj.

2013-04-01

Index tracking is a popular form of passive fund management in stock market. Passive management is a buy-and-hold strategy that aims to achieve rate of return similar to the market return. Index tracking problem is a problem of reproducing the performance of a stock market index, without purchasing all of the stocks that make up the index. This can be done by establishing an optimal portfolio that minimizes risk or tracking error. An improved index tracking (enhanced index tracking) is a dual-objective optimization problem, a trade-off between maximizing the mean return and minimizing the tracking error. Enhanced index tracking aims to generate excess return over the return achieved by the index. The objective of this study is to compare the portfolio compositions and performances by using two different approaches in enhanced index tracking problem, which are goal programming and cointegration. The result of this study shows that the optimal portfolios for both approaches are able to outperform the Malaysia market index which is Kuala Lumpur Composite Index. Both approaches give different optimal portfolio compositions. Besides, the cointegration approach outperforms the goal programming approach because the cointegration approach gives higher mean return and lower risk or tracking error. Therefore, the cointegration approach is more appropriate for the investors in Malaysia.

Enhancing the Teaching of Statistics: Portfolio Theory, an Application of Statistics in Finance

ERIC Educational Resources Information Center

Christou, Nicolas

2008-01-01

In this paper we present an application of statistics using real stock market data. Most, if not all, students have some familiarity with the stock market (or at least they have heard about it) and therefore can understand the problem easily. It is the real data analysis that students find interesting. Here we explore the building of efficient…

Hikers and recreational stock users: Predicting and managing recreation conflicts in three wildernesses

Treesearch

Alan E. Watson; Michael J. Niccolucci; Daniel R. Williams

1993-01-01

A long-term problem that continues to grow in many wildland areas is the displeasure hikers express about meeting recreational livestock (primarily horses and mules) and seeing impacts from stock use. Three studies were conducted to provide a broad look at this interaction in wilderness and some of the contributors to the conflict between hikers and horse users....

The backup is active in Alzheimer's disease: a hypothesis from problem theory.

PubMed

Burnand, Gordon

2015-03-01

Problem theory distinguishes between six general problems of everyday life, which people work through in turn during childhood, learning to switch between them. One of them requires the protection of a cut-out and an override. People who develop Alzheimer's disease (AD), and apolipoprotein allele epsilon 4 carriers, are preoccupied with this problem, or readily switch back to it. It is the freedom problem, of raising hope or confidence of freedom or power to control. Here people try to raise hope of success with any task on which attention happens to rest. This indiscriminateness means that there is no basis for giving up on a task, or for avoiding dangerous environments. Thus the cut-out is needed when someone becomes stuck on a mental task and the override is needed so as to help in avoiding danger. Activity relevant to the freedom problem is confined to the left hemisphere and the right hemisphere operates the cut-out and override. In providing these two forms of protection the right hemisphere can be said to act as a backup. Accordingly EEG, metabolism, and atrophy findings indicate that both cut-out and override are active in mild clinical impairment, especially among patients who later develop AD. The pattern of atrophy of AD matches what would be expected from disuse caused by an overactive cut-out followed by an overactive override. A parallel loss of testosterone might contribute to the weakening of resistance to infections leading to autoimmune effects. Copyright © 2015 The Author. Published by Elsevier Ltd.. All rights reserved.

Volume of the steady-state space of financial flows in a monetary stock-flow-consistent model

NASA Astrophysics Data System (ADS)

Hazan, Aurélien

2017-05-01

We show that a steady-state stock-flow consistent macro-economic model can be represented as a Constraint Satisfaction Problem (CSP). The set of solutions is a polytope, which volume depends on the constraints applied and reveals the potential fragility of the economic circuit, with no need to study the dynamics. Several methods to compute the volume are compared, inspired by operations research methods and the analysis of metabolic networks, both exact and approximate. We also introduce a random transaction matrix, and study the particular case of linear flows with respect to money stocks.

Computational Efficiency of the Simplex Embedding Method in Convex Nondifferentiable Optimization

NASA Astrophysics Data System (ADS)

Kolosnitsyn, A. V.

2018-02-01

The simplex embedding method for solving convex nondifferentiable optimization problems is considered. A description of modifications of this method based on a shift of the cutting plane intended for cutting off the maximum number of simplex vertices is given. These modification speed up the problem solution. A numerical comparison of the efficiency of the proposed modifications based on the numerical solution of benchmark convex nondifferentiable optimization problems is presented.

Comparison between global financial crisis and local stock disaster on top of Chinese stock network

NASA Astrophysics Data System (ADS)

Xia, Lisi; You, Daming; Jiang, Xin; Guo, Quantong

2018-01-01

The science of complex network theory can be usefully applied in many important fields, one of which is the finance. In these practical cases, a massive dataset can be represented as a very large network with certain attributes associated with its nodes and edges. As one of the most important components of financial market, stock market has been attracting more and more attention. In this paper, we propose a threshold model to build Chinese stock market networks and study the topological properties of these networks. To be specific, we compare the effects of different crises, namely the 2008 global crisis and the stock market disaster in 2015, on the threshold networks. Prices of the stocks belonging to the Shanghai and Shenzhen 300 index are considered for three periods: the global crisis, common period and the stock market disaster. We find the probability distribution of the cross-correlations of the stocks during the stock market disaster is fatter than that of others. Besides, the thresholds of cross-correlations are assigned to obtain the threshold networks and the power-law of degree distribution in these networks are observed in a certain range of threshold values. The networks during the stock market disaster also appear to have larger mean degree and modularity, which reveals the strong correlations among these stock prices. Our findings to some extent crosscheck the liquidity shortage reason which is believed to result in the outbreak of the stock market disaster. Moreover, we hope that this paper could give us a deeper understanding of the market's behavior and also lead to interesting future research about the problems of modern finance theory.

Experimental study of fiber-glass plastic work pieces contour milling

NASA Astrophysics Data System (ADS)

Trushin, N. N.; Lisitsin, V. N.

2018-03-01

The article represents the results of study of cut and feed speed influence on wear of monolithic hard alloy end milling cutter during cutting of foiled fiber-glass plastic sheets, used for printed-circuit boards’ production. The peculiarities and problems of cutting layered materials are described. The most effective feed and cut speed values are determined by cutter wear analysis.

Plywood Inlays Thourgh CO2 Laser Cutting

NASA Astrophysics Data System (ADS)

Pires, Margarida C.; Araujo, J. L.; Teixeira, M. Ribau; Rodrigues, F. Carvalho

1989-07-01

Furniture with inlays is rather expensive. This is so on two accounts: Firstly, furniture with inlays is generally manufactured with solid wood.Secondly,wood carving and figure cutting are both time consuming and they produce a high rate of rejections. To add to it all the cutting and carving of minute figures requires an outstanding craftmanship. In fact the craftman is in most instance the artist and also the manufacturer. While desiring that the high artistic level is maintained in the industry the search for new method to produce inlays for furniture in not son expensive materials and to produce them in a repetitive and flexible way laser cutting of plywood was found to be quite suitable. This paper presents the charts for CO2 laser cutting of both positive and negatives in several types of plywood. The main problem is not so much the cutting of the positive and negatives pieces but to be able to cut the piece in a way that the fitting is done without any problems caused by the ever present charring effect, which takes palce at the edges of the cut pieces. To minimise this aspect positive and negative pieces have to be cut under stringent focusing conditions and with slight different scales. The condittions for our machine are presented.

Optimality problem of network topology in stocks market analysis

NASA Astrophysics Data System (ADS)

Djauhari, Maman Abdurachman; Gan, Siew Lee

2015-02-01

Since its introduction fifteen years ago, minimal spanning tree has become an indispensible tool in econophysics. It is to filter the important economic information contained in a complex system of financial markets' commodities. Here we show that, in general, that tool is not optimal in terms of topological properties. Consequently, the economic interpretation of the filtered information might be misleading. To overcome that non-optimality problem, a set of criteria and a selection procedure of an optimal minimal spanning tree will be developed. By using New York Stock Exchange data, the advantages of the proposed method will be illustrated in terms of the power-law of degree distribution.

Contemporary management issues confronting fisheries science

NASA Astrophysics Data System (ADS)

Frank, Kenneth T.; Brickman, David

2001-06-01

Stock collapses have occurred worldwide. The most frequently cited cause is over-fishing, suggesting that fisheries management has been ineffective in controlling exploitation rates. The progression of a fishery from an over-exploited to a collapsed state involves impairment of the reproductive capacity of the target species, i.e. recruitment over-fishing. In many cases, this occurs by reduction of the spawning stock biomass (SSB) through the systematic elimination of spawning components within a stock complex. While operational definitions of minimum levels of SSB have been developed, they have seldom been applied and never adopted in a Canadian groundfish management context. The answer to the question of how much is enough to perpetuate a stock under exploitation has been illusive. Serebryakov [J. Cons. Int. Explor. Mer, 47 (1990) 267] has advocated definition of critical levels of SSB based on survival rates (R/SSB). We review his method and discuss the utility of the approach. An alternative approach to the problem of estimating minimum SSB is through a fundamental revision of the traditional stock and recruitment relationship. Explicit theoretical SSB thresholds below which reproduction/recruitment is severely impaired based upon density-dependent mating success (or Allee effects) is considered a superior approach to the question of how much is enough because of its ecological grounding. However, the successful application of this approach will require re-definition of the space/time scales of the management unit. Finally, support is growing for the establishment of closed areas or "no-take zones" as an alternative approach to managing the problems of fishing a stock complex by enabling sub-populations to escape fishing. While the expected benefits of areas protected from fishing are numerous, clear demonstrations of benefits of such areas in marine temperate ecosystems are lacking. In fact, unintended negative consequences may result from such actions.

Economic Recession, Teacher-Reported Cuts to School Resources, and Children's Economic and Psychiatric Problems in Young Adulthood

ERIC Educational Resources Information Center

Huurre, Taina; Santalahti, Päivi; Kiviruusu, Olli; Solantaus, Tytti

2015-01-01

The study investigated whether cuts to school resources made during economic recession contribute to children's psychiatric and economic problems in early adulthood. The cohort consisted of 817 Finnish children. Data was gathered from teachers during a recession (child age 12) and from national registers on children's post-recession use of…

Calibration of the Diameter Distribution Derived from the Area-based Approach with Individual Tree-based Diameter Estimates Using the Airborne Laser Scanning

NASA Astrophysics Data System (ADS)

Xu, Q.; Hou, Z.; Maltamo, M.; Tokola, T.

2015-12-01

Diameter distributions of trees are important indicators of current forest stand structure and future dynamics. A new method was proposed in the study to combine the diameter distributions derived from the area-based approach (ABA) and the diameter distribution derived from the individual tree detection (ITD) in order to obtain more accurate forest stand attributes. Since dominant trees can be reliably detected and measured by the Lidar data via the ITD, the focus of the study is to retrieve the suppressed trees (trees that were missed by the ITD) from the ABA. Replacement and histogram matching were respectively employed at the plot level to retrieve the suppressed trees. Cut point was detected from the ITD-derived diameter distribution for each sample plot to distinguish dominant trees from the suppressed trees. The results showed that calibrated diameter distributions were more accurate in terms of error index and the entire growing stock estimates. Compared with the best performer between the ABA and the ITD, calibrated diameter distributions decreased the relative RMSE of the estimated entire growing stock, saw log and pulpwood fractions by 2.81%, 3.05% and 7.73% points respectively. Calibration improved the estimation of pulpwood fraction significantly, resulting in a negligible bias of the estimated entire growing stock.

Genetic diversity analysis in Malaysian giant prawns using expressed sequence tag microsatellite markers for stock improvement program.

PubMed

Atin, K H; Christianus, A; Fatin, N; Lutas, A C; Shabanimofrad, M; Subha, B

2017-08-17

The Malaysian giant prawn is among the most commonly cultured species of the genus Macrobrachium. Stocks of giant prawns from four rivers in Peninsular Malaysia have been used for aquaculture over the past 25 years, which has led to repeated harvesting, restocking, and transplantation between rivers. Consequently, a stock improvement program is now important to avoid the depletion of wild stocks and the loss of genetic diversity. However, the success of such an improvement program depends on our knowledge of the genetic variation of these base populations. The aim of the current study was to estimate genetic variation and differentiation of these riverine sources using novel expressed sequence tag-microsatellite (EST-SSR) markers, which not only are informative on genetic diversity but also provide information on immune and metabolic traits. Our findings indicated that the tested stocks have inbreeding depression due to a significant deficiency in heterozygotes, and F IS was estimated as 0.15538 to 0.31938. An F-statistics analysis suggested that the stocks are composed of one large panmictic population. Among the four locations, stocks from Johor, in the southern region of the peninsular, showed higher allelic and genetic diversity than the other stocks. To overcome inbreeding problems, the Johor population could be used as a base population in a stock improvement program by crossing to the other populations. The study demonstrated that EST-SSR markers can be incorporated in future marker assisted breeding to aid the proper management of the stocks by breeders and stakeholders in Malaysia.

Problems of stock definition in estimating relative contributions of Atlantic striped bass to the coastal fishery

USGS Publications Warehouse

Waldman, John R.; Fabrizio, Mary C.

1994-01-01

Stock contribution studies of mixed-stock fisheries rely on the application of classification algorithms to samples of unknown origin. Although the performance of these algorithms can be assessed, there are no guidelines regarding decisions about including minor stocks, pooling stocks into regional groups, or sampling discrete substocks to adequately characterize a stock. We examined these questions for striped bass Morone saxatilis of the U.S. Atlantic coast by applying linear discriminant functions to meristic and morphometric data from fish collected from spawning areas. Some of our samples were from the Hudson and Roanoke rivers and four tributaries of the Chesapeake Bay. We also collected fish of mixed-stock origin from the Atlantic Ocean near Montauk, New York. Inclusion of the minor stock from the Roanoke River in the classification algorithm decreased the correct-classification rate, whereas grouping of the Roanoke River and Chesapeake Bay stock into a regional (''southern'') group increased the overall resolution. The increased resolution was offset by our inability to obtain separate contribution estimates of the groups that were pooled. Although multivariate analysis of variance indicated significant differences among Chesapeake Bay substocks, increasing the number of substocks in the discriminant analysis decreased the overall correct-classification rate. Although the inclusion of one, two, three, or four substocks in the classification algorithm did not greatly affect the overall correct-classification rates, the specific combination of substocks significantly affected the relative contribution estimates derived from the mixed-stock sample. Future studies of this kind must balance the costs and benefits of including minor stocks and would profit from examination of the variation in discriminant characters among all Chesapeake Bay substocks.

Approximate ground states of the random-field Potts model from graph cuts

NASA Astrophysics Data System (ADS)

Kumar, Manoj; Kumar, Ravinder; Weigel, Martin; Banerjee, Varsha; Janke, Wolfhard; Puri, Sanjay

2018-05-01

While the ground-state problem for the random-field Ising model is polynomial, and can be solved using a number of well-known algorithms for maximum flow or graph cut, the analog random-field Potts model corresponds to a multiterminal flow problem that is known to be NP-hard. Hence an efficient exact algorithm is very unlikely to exist. As we show here, it is nevertheless possible to use an embedding of binary degrees of freedom into the Potts spins in combination with graph-cut methods to solve the corresponding ground-state problem approximately in polynomial time. We benchmark this heuristic algorithm using a set of quasiexact ground states found for small systems from long parallel tempering runs. For a not-too-large number q of Potts states, the method based on graph cuts finds the same solutions in a fraction of the time. We employ the new technique to analyze the breakup length of the random-field Potts model in two dimensions.

On making cuts for magnetic scalar potentials in multiply connected regions

NASA Astrophysics Data System (ADS)

Kotiuga, P. R.

1987-04-01

The problem of making cuts is of importance to scalar potential formulations of three-dimensional eddy current problems. Its heuristic solution has been known for a century [J. C. Maxwell, A Treatise on Electricity and Magnetism, 3rd ed. (Clarendon, Oxford, 1981), Chap. 1, Article 20] and in the last decade, with the use of finite element methods, a restricted combinatorial variant has been proposed and solved [M. L. Brown, Int. J. Numer. Methods Eng. 20, 665 (1984)]. This problem, in its full generality, has never received a rigorous mathematical formulation. This paper presents such a formulation and outlines a rigorous proof of existence. The technique used in the proof expose the incredible intricacy of the general problem and the restrictive assumptions of Brown [Int. J. Numer. Methods Eng. 20, 665 (1984)]. Finally, the results make rigorous Kotiuga's (Ph. D. Thesis, McGill University, Montreal, 1984) heuristic interpretation of cuts and duality theorems via intersection matrices.

Carbon dioxide makes heat therapy work

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sherman, H.

1987-01-01

Scientists can now propagate healthy blueberry and raspberry plants from virus-infected stock by treating it with heat and carbon dioxide. Plants are grown at 100/sup 0/F, which makes them develop faster than the virus can spread. Then cuttings are taken of the new growth - less than an inch long - and grown into full-sized, virus-free plants. But in this race to outdistance the virus, some plant species are not able to take the heat. Some even die. Chemical reactions double for every 14/sup 0/F rise in temperature. So, if you try to grow a plant at 100/sup 0/F thatmore » was originally growing at 86/sup 0/F, it will double its respiration rate. Adding carbon dioxide increases the rate of photosynthesis in plants, which increases the plant's food reserves. What carbon dioxide does to allow some plants to grow at temperatures at which they would otherwise not survive and it allows other plants to grow for longer periods at 100/sup 0/F. One problem with the process, says Converse, is that the longer plants are exposed to heat the greater the mutation rate. So, resulting clones should be closely examined for trueness to horticultural type.« less

A Two Population Model for the Stock Market Problem

NASA Astrophysics Data System (ADS)

Skiadas, Christos H.

The development of the last year disaster in the Stock Markets all over the world gave rise to reconsidering the previous models used. It is clear that, even in an organized international or national context, large fluctuations and sudden losses may occur. This paper explores a two populations' model. The populations are conflicting into the same environment (a Stock Market) by following the main rules present, that is mutual interaction between adopters, potential adopters, word-of-mouth communication and of course by taking into consideration the innovation diffusion process. The proposed model has special futures expressed by third order terms providing characteristic stationary points.

Intermediate Cutting in Mixed Upland Oak Stands on the Western Highland Rim, Tennessee, After a Quarter of a Century

Treesearch

Adrienne N. Hall; John C. Rennie; Glendon W. Smalley

2004-01-01

In 1973 and 1974, a study was established at Stewart State Forest (SSF) and Lewis State Forest (LSF) to evaluate Roach and Gingrich’s “Even-Aged Silviculture for Upland Central Oaks” on the Western Highland Rim. Harvesting to the “B-level” of the stocking guide primarily removed cull and low-quality stems. Basal area was reduced from 110 to 80 square feet per acre at...

Spatial trends in relative stocking point to potential problems in forest health

Treesearch

David A. Gansner; Susan L. King; Stanford L. Arner; Richard H. Widmann; David A. Drake

1995-01-01

The term "forest health" means many things to many people and we do not know how to measure it. Baseline standards for conducting a physical examination of a stand of trees do not exist. One factor that can be considered when making judgments about the health of a particular forest tree species is change in the relative stocking of that species, that is the...

Impetigo

MedlinePlus

... is already irritated by another problem, such as eczema , poison ivy , insect bites , and cuts or scrapes . ... injuries (cuts, scrapes, bug bites, etc.), areas of eczema, and rashes such as poison ivy. Keep these ...

Continuous-time mean-variance portfolio selection with value-at-risk and no-shorting constraints

NASA Astrophysics Data System (ADS)

Yan, Wei

2012-01-01

An investment problem is considered with dynamic mean-variance(M-V) portfolio criterion under discontinuous prices which follow jump-diffusion processes according to the actual prices of stocks and the normality and stability of the financial market. The short-selling of stocks is prohibited in this mathematical model. Then, the corresponding stochastic Hamilton-Jacobi-Bellman(HJB) equation of the problem is presented and the solution of the stochastic HJB equation based on the theory of stochastic LQ control and viscosity solution is obtained. The efficient frontier and optimal strategies of the original dynamic M-V portfolio selection problem are also provided. And then, the effects on efficient frontier under the value-at-risk constraint are illustrated. Finally, an example illustrating the discontinuous prices based on M-V portfolio selection is presented.

Performance evaluation of NEEM oil and HONGE Oil as cutting fluid in drilling operation of mild steel

NASA Astrophysics Data System (ADS)

Jyothi, P. N.; Susmitha, M.; Sharan, P.

2017-04-01

Cutting fluids are used in machining industries for improving tool life, reducing work piece and thermal deformation, improving surface finish and flushing away chips from the cutting zone. Although the application of cutting fluids increases the tool life and Machining efficiency, but it has many major problems related to environmental impacts and health hazards along with recycling & disposal. These problems gave provision for the introduction of mineral, vegetable and animal oils. These oils play an important role in improving various machining properties, including corrosion protection, lubricity, antibacterial protection, even emulsibility and chemical stability. Compared to mineral oils, vegetable oils in general possess high viscosity index, high flash point, high lubricity and low evaporative losses. Vegetable oils can be edible or non-edible oils and Various researchers have proved that edible vegetable oils viz., palm oil, coconut oil, canola oil, soya bean oil can be effectively used as eco-friendly cutting fluid in machining operations. But in present situations harnessing edible oils for lubricants formation restricts the use due to increased demands of growing population worldwide and availability. In the present work, Non-edible vegetable oil like Neem and Honge are been used as cutting fluid for drilling of Mild steel and its effect on cutting temperature, hardness and surface roughness are been investigated. Results obtained are compared with SAE 20W40 (petroleum based cutting fluid)and dry cutting condition.

40Ar/39Ar geochronology and paleomagnetism of Independence volcano, Absaroka volcanic supergroup, Beartooth mountains, Montana

USGS Publications Warehouse

Harlan, S.S.; Snee, L.W.; Geissman, J.W.

1996-01-01

Independence volcano is a major volcanic complex in the lower part of the Absaroka Volcanic Supergroup (AVS) of Montana and Wyoming. Recently reported Rb-Sr mineral dates from the complex give apparent ages of 91 and 84 Ma, whereas field relationships and the physical and compositional similarity of the rocks with other dated parts of the AVS indicate an Early to Middle Eocene age for eruption and deposition. To resolve the conflict between age assignments based on stratigraphic correlations and Rb-Sr dates, we report new paleomagnetic data and 40Ar/39Ar dates for Independence volcano. Paleomagnetic data for the stock and an and andesite plug that cuts the stock are well grouped, of reverse polarity, and yield a virtual geomagnetic pole that is essentially identical to Late Cretaceous and Tertiary reference poles. The reverse polarity indicates that the magnetization of these rocks is probably younger than the Cretaceous normal superchron, or less than about 83.5 Ma. Hornblende from a volcanic breccia near the base of the volcanic pile gives a 40Ar/39Ar age of 51.57 Ma, whereas biotites from a dacite sill and a granodiorite stock that forms the core of the volcano give dates that range from 49.96 to 48.50 Ma. These dates record the age of eruption and intrusion of these rocks and clearly show that the age of Independence volcano is Early to Middle Eocene, consistent with stratigraphic relations. We suggest that the Rb-Sr mineral dates from the Independence stock and related intrusions are unreliable.

Dollars for lives: the effect of highway capital investments on traffic fatalities.

PubMed

Nguyen-Hoang, Phuong; Yeung, Ryan

2014-12-01

This study examines the effect of highway capital investments on highway fatalities. We used state-level data from the 48 contiguous states in the United States from 1968 through 2010 to estimate the effects on highway fatalities of capital expenditures and highway capital stock. We estimated these effects by controlling for a set of control variables together with state and year dummy variables and state-specific linear time trends. We found that capital expenditures and capital stock had significant and negative effects on highway fatalities. States faced with declines in gas tax revenues have already cut back drastically on spending on roads including on maintenance and capital outlay. If this trend continues, it may undermine traffic safety. While states and local governments are currently fiscally strained, it is important for them to continue investments in roadways to enhance traffic safety and, more significantly, to save lives. Copyright © 2014 National Safety Council and Elsevier Ltd. All rights reserved.

Self-harm

MedlinePlus

... have trouble stopping. Examples of self-harm include Cutting yourself (such as using a razor blade, knife, ... them a sense of relief. Some people use cutting as a means to cope with a problem. ...

In Print or Out of Print? The Continuing Problem.

ERIC Educational Resources Information Center

Kayden, Mimi

1982-01-01

Briefly describes the problems encountered by libraries in attempting to purchase out-of-stock books and discusses some of the reasons for changes in the way publishers handle backlist materials, including sales volume and its relation to increased printing costs. (JL)

Warehouse stocking optimization based on dynamic ant colony genetic algorithm

NASA Astrophysics Data System (ADS)

Xiao, Xiaoxu

2018-04-01

In view of the various orders of FAW (First Automotive Works) International Logistics Co., Ltd., the SLP method is used to optimize the layout of the warehousing units in the enterprise, thus the warehouse logistics is optimized and the external processing speed of the order is improved. In addition, the relevant intelligent algorithms for optimizing the stocking route problem are analyzed. The ant colony algorithm and genetic algorithm which have good applicability are emphatically studied. The parameters of ant colony algorithm are optimized by genetic algorithm, which improves the performance of ant colony algorithm. A typical path optimization problem model is taken as an example to prove the effectiveness of parameter optimization.

A Comparison Study of Stochastic- and Guaranteed- Service Approaches on Safety Stock Optimization for Multi Serial Systems

NASA Astrophysics Data System (ADS)

Li, Peng; Wu, Di

2018-01-01

Two competing approaches have been developed over the years for multi-echelon inventory system optimization, stochastic-service approach (SSA) and guaranteed-service approach (GSA). Although they solve the same inventory policy optimization problem in their core, they make different assumptions with regard to the role of safety stock. This paper provides a detailed comparison of the two approaches by considering operating flexibility costs in the optimization of (R, Q) policies for a continuous review serial inventory system. The results indicate the GSA model is more efficiency in solving the complicated inventory problem in terms of the computation time, and the cost difference of the two approaches is quite small.

Enhancing Nursing Staffing Forecasting With Safety Stock Over Lead Time Modeling.

PubMed

McNair, Douglas S

2015-01-01

In balancing competing priorities, it is essential that nursing staffing provide enough nurses to safely and effectively care for the patients. Mathematical models to predict optimal "safety stocks" have been routine in supply chain management for many years but have up to now not been applied in nursing workforce management. There are various aspects that exhibit similarities between the 2 disciplines, such as an evolving demand forecast according to acuity and the fact that provisioning "stock" to meet demand in a future period has nonzero variable lead time. Under assumptions about the forecasts (eg, the demand process is well fit as an autoregressive process) and about the labor supply process (≥1 shifts' lead time), we show that safety stock over lead time for such systems is effectively equivalent to the corresponding well-studied problem for systems with stationary demand bounds and base stock policies. Hence, we can apply existing models from supply chain analytics to find the optimal safety levels of nurse staffing. We use a case study with real data to demonstrate that there are significant benefits from the inclusion of the forecast process when determining the optimal safety stocks.

The forest ecosystem of southeast Alaska: 6. Forest diseases.

Treesearch

Thomas H. Laurent

1974-01-01

The disease problems of old growth are largely being taken care of by cutting. This same cutting is rapidly converting large areas of old growth to reproduction and young growth. It is in these areas of young growth that our disease problems will most probably arise. With a few exceptions the reproduction and young-growth stands appear quite healthy at this time with...

Diabetes and Foot Problems

MedlinePlus

... medicated pads use liquid corn and callus removers Cutting and over-the counter corn removal products can ... nonsharp nail file. Trimming this way helps prevent cutting your skin and keeps the nails from growing ...

Stock-specific advection of larval walleye (Sander vitreus) in western Lake Erie: Implications for larval growth, mixing, and stock discrimination

USGS Publications Warehouse

Fraker, Michael E.; Anderson, Eric J.; May, Cassandra J.; Chen, Kuan-Yu; Davis, Jeremiah J.; DeVanna, Kristen M.; DuFour, Mark R.; Marschall, Elizabeth A.; Mayer, Christine M.; Miner, Jeffery G.; Pangle, Kevin L.; Pritt, Jeremy J.; Roseman, Edward F.; Tyson, Jeffrey T.; Zhao, Yingming; Ludsin, Stuart A

2015-01-01

Physical processes can generate spatiotemporal heterogeneity in habitat quality for fish and also influence the overlap of pre-recruit individuals (e.g., larvae) with high-quality habitat through hydrodynamic advection. In turn, individuals from different stocks that are produced in different spawning locations or at different times may experience dissimilar habitat conditions, which can underlie within- and among-stock variability in larval growth and survival. While such physically-mediated variation has been shown to be important in driving intra- and inter-annual patterns in recruitment in marine ecosystems, its role in governing larval advection, growth, survival, and recruitment has received less attention in large lake ecosystems such as the Laurentian Great Lakes. Herein, we used a hydrodynamic model linked to a larval walleye (Sander vitreus) individual-based model to explore how the timing and location of larval walleye emergence from several spawning sites in western Lake Erie (Maumee, Sandusky, and Detroit rivers; Ohio reef complex) can influence advection pathways and mixing among these local spawning populations (stocks), and how spatiotemporal variation in thermal habitat can influence stock-specific larval growth. While basin-wide advection patterns were fairly similar during 2011 and 2012, smaller scale advection patterns and the degree of stock mixing varied both within and between years. Additionally, differences in larval growth were evident among stocks and among cohorts within stocks which were attributed to spatiotemporal differences in water temperature. Using these findings, we discuss the value of linked physical–biological models for understanding the recruitment process and addressing fisheries management problems in the world's Great Lakes.

On Computations of Duct Acoustics with Near Cut-Off Frequency

NASA Technical Reports Server (NTRS)

Dong, Thomas Z.; Povinelli, Louis A.

1997-01-01

The cut-off is a unique feature associated with duct acoustics due to the presence of duct walls. A study of this cut-off effect on the computations of duct acoustics is performed in the present work. The results show that the computation of duct acoustic modes near cut-off requires higher numerical resolutions than others to avoid being numerically cut off. Duct acoustic problems in Category 2 are solved by the DRP finite difference scheme with the selective artificial damping method and results are presented and compared to reference solutions.

Some Problems and Insights in the Lexicography of Two Non-Kindred Languages: Spanish and Swahili.

ERIC Educational Resources Information Center

Githiora, Chege

2001-01-01

Discusses problems and insights gained during the preparation of a bilingual dictionary of Spanish--a Romance and ultimately Indo-European language--and Swahili, a coastal Bantu language of the Niger-Congo stock of African languages. (Author/VWL)

Correlations of stock price fluctuations under multi-scale and multi-threshold scenarios

NASA Astrophysics Data System (ADS)

Sui, Guo; Li, Huajiao; Feng, Sida; Liu, Xueyong; Jiang, Meihui

2018-01-01

The multi-scale method is widely used in analyzing time series of financial markets and it can provide market information for different economic entities who focus on different periods. Through constructing multi-scale networks of price fluctuation correlation in the stock market, we can detect the topological relationship between each time series. Previous research has not addressed the problem that the original fluctuation correlation networks are fully connected networks and more information exists within these networks that is currently being utilized. Here we use listed coal companies as a case study. First, we decompose the original stock price fluctuation series into different time scales. Second, we construct the stock price fluctuation correlation networks at different time scales. Third, we delete the edges of the network based on thresholds and analyze the network indicators. Through combining the multi-scale method with the multi-threshold method, we bring to light the implicit information of fully connected networks.

Public and health professionals’ misconceptions about the dynamics of body weight gain/loss

PubMed Central

Abdel-Hamid, Tarek; Ankel, Felix; Battle-Fisher, Michele; Gibson, Bryan; Gonzalez-Parra, Gilberto; Jalali, Mohammad; Kaipainen, Kirsikka; Kalupahana, Nishan; Karanfil, Ozge; Marathe, Achla; Martinson, Brian; McKelvey, Karma; Sarbadhikari, Suptendra Nath; Pintauro, Stephen; Poucheret, Patrick; Pronk, Nicolaas; Qian, Ying; Sazonov, Edward; Van Oorschot, Kim; Venkitasubramanian, Akshay; Murphy, Philip

2014-01-01

Human body energy storage operates as a stock-and-flow system with inflow (food intake) and outflow (energy expenditure). In spite of the ubiquity of stock-and-flow structures, evidence suggests that human beings fail to understand stock accumulation and rates of change, a difficulty called the stock–flow failure. This study examines the influence of health care training and cultural background in overcoming stock–flow failure. A standardized protocol assessed lay people’s and health care professionals’ ability to apply stock-and-flow reasoning to infer the dynamics of weight gain/loss during the holiday season (621 subjects from seven countries). Our results indicate that both types of subjects exhibited systematic errors indicative of use of erroneous heuristics. Stock–flow failure was found across cultures and was not improved by professional health training. The problem of stock–flow failure as a transcultural global issue with education and policy implications is discussed. PMID:25620843

Gender Difference in Internet Use and Internet Problems among Quebec High School Students.

PubMed

Dufour, Magali; Brunelle, Natacha; Tremblay, Joel; Leclerc, Danielle; Cousineau, Marie-Marthe; Khazaal, Yasser; Légaré, Andrée-Anne; Rousseau, Michel; Berbiche, Djamal

2016-10-01

There are presently no data available concerning Internet addiction (IA) problems among adolescents in Canada and the province of Quebec. The goal of this study is thus to document and compare the influence of gender on Internet use and addiction. The study data were collected from a larger research project on gambling among adolescents. Activities conducted online (applications used and time spent) as well as answers to the Internet Addiction Test (IAT) were collected from 3938 adolescents from grades 9 to 11. The two most often employed cut-off points for the IAT in the literature were documented: (40-69 and 70+) and (50+). Boys spent significantly more time on the Internet than did girls. A greater proportion of the girls made intense use of social networks, whereas a greater proportion of the boys made intense use of massively multiplayer online role-playing games, online games, and adult sites. The proportion of adolescents with a potential IA problem varied according to the cut-off employed. When the cut-off was set at 70+, 1.3% of the adolescents were considered to have an IA, while 41.7% were seen to be at risk. At a 50+ cut-off, 18% of the adolescents were considered to have a problem. There was no significant difference between the genders concerning the proportion of adolescents considered to be at risk or presenting IA problems. Finally, analysis of the percentile ranks would seem to show that a cut-off of 50+ better describes the category of young people at risk. The results of this study make it possible to document Internet use and IA in a large number of Quebec adolescents. © The Author(s) 2016.

AUDIT and AUDIT-C as screening instruments for alcohol problem use in adolescents.

PubMed

Liskola, Joni; Haravuori, Henna; Lindberg, Nina; Niemelä, Solja; Karlsson, Linnea; Kiviruusu, Olli; Marttunen, Mauri

2018-07-01

The Alcohol Use Disorders Identification Test (AUDIT) is commonly used in adults to screen for harmful alcohol consumption but few studies exist on its use among adolescents. Our aim was to validate the AUDIT and its derivative consumption questionnaire (AUDIT-C) as screening instruments for the detection of problem use of alcohol in adolescents. 621 adolescents (age-range, 12-19 years) were drawn from clinical and population samples who completed the AUDIT questionnaire. Psychiatric diagnoses were assessed using K-SADS-PL. A rating based on the K-SADS-PL was used to assess alcohol use habits, alcohol use disorders, screening and symptom criteria questions. Screening performance of the AUDIT and AUDIT-C sum scores and Receiver Operating Characteristic (ROC) curves were calculated. The diagnostic odds ratios (dOR) were calculated to express the overall discrimination between cut-offs. Comparisons of ROC between the AUDIT and AUDIT-C pairs indicated a slightly better test performance by AUDIT for the whole sample and in a proportion of the subsamples. Optimal cut-off value for the AUDIT was ≥5 (sensitivity 0.931, specificity 0.772, dOR 45.22; 95% CI: 24.72-83.57) for detecting alcohol problem use. The corresponding optimal cut-off value for the AUDIT-C was ≥3 in detecting alcohol problem use (sensitivity 0.952, specificity 0.663, dOR 39.31; 95% CI: 19.46-78.97). Agreement between the AUDIT and AUDIT-C using these cut-off scores was high at 91.9%. Our results for the cut-off scores for the early detection of alcohol problem use in adolescents are ≥5 for AUDIT, and ≥3 for AUDIT-C. Copyright © 2018 Elsevier B.V. All rights reserved.

Thin edge-defined film-fed growth (EFG) octagons

NASA Astrophysics Data System (ADS)

Kalejs, J. P.

1992-03-01

Mobil Solar Energy Corp. investigated manufacturing crystalline silicon wafers using the edge-defined film-fed growth (EFG) technique. This report identifies the following: (1) current capabilities for manufacturing 200-micron-thick crystalline silicon wafers (10 cm x 10 cm) produced by growing octagons using the EFG technique and laser cutting them into wafers; (2) potential manufacturing improvements from decreasing the thickness of the wafers, improving the quality of the laser cut edge, and increasing cutting speed, all of which lead to reduce manufacturing costs, improved performance, and increased production capacities; (3) problems that impede achieving these potentials; and (4) costs and other requirements involved in overcoming the problems.

Sawtooth forces in cutting tropical hardwoods native to South America

Treesearch

S. P. Loehnertz; I. V. Cooz

As a result of design, operation, and maintenance, sawblades used in tropical sawmills can cause many problems. Improvements in these areas are needed to reduce the waste associated with sawing of tropical species that are regarded as difficult to cut. In this study, cutting experiments that simulated bandsawing of tropical hardwoods showed the effect of chip...

The Bookmark Procedure for Setting Cut-Scores and Finalizing Performance Standards: Strengths and Weaknesses

ERIC Educational Resources Information Center

Lin, Jie

2006-01-01

The Bookmark standard-setting procedure was developed to address the perceived problems with the most popular method for setting cut-scores: the Angoff procedure (Angoff, 1971). The purposes of this article are to review the Bookmark procedure and evaluate it in terms of Berk's (1986) criteria for evaluating cut-score setting methods. The…

Selecting a silvicultural system

Treesearch

Richard M. Godman

1992-01-01

Sometimes a name creates a problem. The name of a silvicultural system usually refers to the way a stand is cut to get regeneration-"single tree selection"-for example. Trouble is, the name suggests that the regeneration cut will be the first treatment applied to the stand. Not so. We are now mostly making "intermediate" cuts in our Lake States...

Regeneration after Clearcutting in the Southern Appalachians

Treesearch

Charles E. McGee; Ralph M. Hooper

1970-01-01

Even-aged silviculture with its associated heavy harvest cutting has tremendous potential for regenerating upland hardwoods. However, evenaged silviculture must involve much more than a heavy harvest cut, for a heavy cut alone does not necessarily solve all of the problems of upland hardwood regeneration. In this paper a careful look is taken at a 46-acre tract of...

Phase unwrapping with graph cuts optimization and dual decomposition acceleration for 3D high-resolution MRI data.

PubMed

Dong, Jianwu; Chen, Feng; Zhou, Dong; Liu, Tian; Yu, Zhaofei; Wang, Yi

2017-03-01

Existence of low SNR regions and rapid-phase variations pose challenges to spatial phase unwrapping algorithms. Global optimization-based phase unwrapping methods are widely used, but are significantly slower than greedy methods. In this paper, dual decomposition acceleration is introduced to speed up a three-dimensional graph cut-based phase unwrapping algorithm. The phase unwrapping problem is formulated as a global discrete energy minimization problem, whereas the technique of dual decomposition is used to increase the computational efficiency by splitting the full problem into overlapping subproblems and enforcing the congruence of overlapping variables. Using three dimensional (3D) multiecho gradient echo images from an agarose phantom and five brain hemorrhage patients, we compared this proposed method with an unaccelerated graph cut-based method. Experimental results show up to 18-fold acceleration in computation time. Dual decomposition significantly improves the computational efficiency of 3D graph cut-based phase unwrapping algorithms. Magn Reson Med 77:1353-1358, 2017. © 2016 International Society for Magnetic Resonance in Medicine. © 2016 International Society for Magnetic Resonance in Medicine.

Experimental investigations on cryogenic cooling by liquid nitrogen in the end milling of hardened steel

NASA Astrophysics Data System (ADS)

Ravi, S.; Pradeep Kumar, M.

2011-09-01

Milling of hardened steel generates excessive heat during the chip formation process, which increases the temperature of cutting tool and accelerates tool wear. Application of conventional cutting fluid in milling process may not effectively control the heat generation also it has inherent health and environmental problems. To minimize health hazard and environmental problems caused by using conventional cutting fluid, a cryogenic cooling set up is developed to cool tool-chip interface using liquid nitrogen (LN 2). This paper presents results on the effect of LN 2 as a coolant on machinability of hardened AISI H13 tool steel for varying cutting speed in the range of 75-125 m/min during end milling with PVD TiAlN coated carbide inserts at a constant feed rate. The results show that machining with LN 2 lowers cutting temperature, tool flank wear, surface roughness and cutting forces as compared with dry and wet machining. With LN 2 cooling, it has been found that the cutting temperature was reduced by 57-60% and 37-42%; the tool flank wear was reduced by 29-34% and 10-12%; the surface roughness was decreased by 33-40% and 25-29% compared to dry and wet machining. The cutting forces also decreased moderately compared to dry and wet machining. This can be attributed to the fact that LN 2 machining provides better cooling and lubrication through substantial reduction in the cutting zone temperature.

What energy functions can be minimized via graph cuts?

PubMed

Kolmogorov, Vladimir; Zabih, Ramin

2004-02-01

In the last few years, several new algorithms based on graph cuts have been developed to solve energy minimization problems in computer vision. Each of these techniques constructs a graph such that the minimum cut on the graph also minimizes the energy. Yet, because these graph constructions are complex and highly specific to a particular energy function, graph cuts have seen limited application to date. In this paper, we give a characterization of the energy functions that can be minimized by graph cuts. Our results are restricted to functions of binary variables. However, our work generalizes many previous constructions and is easily applicable to vision problems that involve large numbers of labels, such as stereo, motion, image restoration, and scene reconstruction. We give a precise characterization of what energy functions can be minimized using graph cuts, among the energy functions that can be written as a sum of terms containing three or fewer binary variables. We also provide a general-purpose construction to minimize such an energy function. Finally, we give a necessary condition for any energy function of binary variables to be minimized by graph cuts. Researchers who are considering the use of graph cuts to optimize a particular energy function can use our results to determine if this is possible and then follow our construction to create the appropriate graph. A software implementation is freely available.

The impact of female genital cutting on health of newly married women.

PubMed

Elnashar, A; Abdelhady, R

2007-06-01

To detect the rate of female genital cutting among a sample of newly married women in Benha city, and make a comparison between circumcised and non-circumcised women regarding long-term health problems. Randomly selected (264) newly married women were the subjects of this work. Circumcised group constitutes 75.8% of the sample. All non-circumcised women were living in an urban area. Dysmenorrhea was more common among circumcised rather than non-circumcised, with statistically significant difference (P<0.01). Marital problems (dyspareunia, loss of libido, failure of orgasm and husband's dissatisfaction) had statistically different levels of significance among circumcised women. Obstetric problems such as tears, episiotomy and consequently distressed babies were more events among circumcised mothers with statistical significance. Circumcised females had significant mental problems such as somatization, anxiety and phobia (P<0.001). Female genital cutting remains a widely practiced custom in our society. Grave complications of circumcision may last throughout women's life particularly the time of consummation of marriage and the time of childbirth.

Core Cutting Test with Vertical Rock Cutting Rig (VRCR)

NASA Astrophysics Data System (ADS)

Yasar, Serdar; Osman Yilmaz, Ali

2017-12-01

Roadheaders are frequently used machines in mining and tunnelling, and performance prediction of roadheaders is important for project economics and stability. Several methods were proposed so far for this purpose and, rock cutting tests are the best choice. Rock cutting tests are generally divided into two groups which are namely, full scale rock cutting tests and small scale rock cutting tests. These two tests have some superiorities and deficiencies over themselves. However, in many cases, where rock sampling becomes problematic, small scale rock cutting test (core cutting test) is preferred for performance prediction, since small block samples and core samples can be conducted to rock cutting testing. Common problem for rock cutting tests are that they can be found in very limited research centres. In this study, a new mobile rock cutting testing equipment, vertical rock cutting rig (VRCR) was introduced. Standard testing procedure was conducted on seven rock samples which were the part of a former study on cutting rocks with another small scale rock cutting test. Results showed that core cutting test can be realized successfully with VRCR with the validation of paired samples t-test.

Evolutions of fluctuation modes and inner structures of global stock markets

NASA Astrophysics Data System (ADS)

Yan, Yan; Wang, Lei; Liu, Maoxin; Chen, Xiaosong

2016-09-01

The paper uses empirical data, including 42 globally main stock indices in the period 1996-2014, to systematically study the evolution of fluctuation modes and inner structures of global stock markets. The data are large in scale considering both time and space. A covariance matrix-based principle fluctuation mode analysis (PFMA) is used to explore the properties of the global stock markets. It has been ignored by previous studies that covariance matrix is more suitable than the correlation matrix to be the basis of PFMA. It is found that the principle fluctuation modes of global stock markets are in the same directions, and global stock markets are divided into three clusters, which are found to be closely related to the countries’ locations with exceptions of China, Russia and Czech Republic. A time-stable correlation network constructing method is proposed to solve the problem of high-level statistical uncertainty when the estimated periods are very short, and the complex dynamic network (CDN) is constructed to investigate the evolution of inner structures. The results show when the clusters emerge and how long the clusters exist. When the 2008 financial crisis broke out, the indices form one cluster. After these crises, only the European cluster still exists. These findings complement the previous studies, and can help investors and regulators to understand the global stock markets.

The rebuilding imperative in fisheries: Clumsy solutions for a wicked problem?

NASA Astrophysics Data System (ADS)

Khan, Ahmed S.; Neis, Barb

2010-10-01

There is mounting evidence that global fisheries are in crisis and about 25-30% of fish stocks are over exploited, depleted or recovering. Fish landings are increasingly coming from fully-exploited and over-exploited fisheries, and from intensive aquaculture that often relies indirectly on reduction fisheries. This poses severe challenges for marine ecosystems as well as food security and the livelihoods of resource-dependent coastal communities. Growing awareness of these social, economic and ecological consequences of overfishing is reflected in an expanding literature which shows that reducing fishing effort to allow fish stocks to recover has been the main focus of management efforts, but successful examples of stock recovery are few. An alternative, less explored social-ecological approach focuses on rebuilding entire ‘fish chains’ from oceans to plate. This paper supports this alternative approach. A review and synthesis of stock rebuilding initiatives worldwide suggests effective governance is central to rebuilding, and fisheries governance is a wicked problem. Wicked problems are complex, persistent or reoccurring and hard to fix because they are linked to broader social, economic and policy issues. This review and analysis implies that, due to socioeconomic and sociopolitical concerns, fisheries governance challenges are particularly wicked when dealing with collapsed fisheries and rebuilding efforts. The paper concludes that rebuilding might benefit from experimenting with clumsy solutions. Clumsy solutions are exploratory, include inputs from a broad range of stakeholders along the fish chain, and require information sharing, knowledge synthesis, and trust building. Moreover, clumsy solutions that address power relations, collective action dilemmas, and the fundamental question of ‘rebuilding for whom’ are essential for stewardship, equity and long-term resource sustainability.

Development of an evolutionary fuzzy expert system for estimating future behavior of stock price

NASA Astrophysics Data System (ADS)

Mehmanpazir, Farhad; Asadi, Shahrokh

2017-03-01

The stock market has always been an attractive area for researchers since no method has been found yet to predict the stock price behavior precisely. Due to its high rate of uncertainty and volatility, it carries a higher risk than any other investment area, thus the stock price behavior is difficult to simulation. This paper presents a "data mining-based evolutionary fuzzy expert system" (DEFES) approach to estimate the behavior of stock price. This tool is developed in seven-stage architecture. Data mining is used in three stages to reduce the complexity of the whole data space. The first stage, noise filtering, is used to make our raw data clean and smooth. Variable selection is second stage; we use stepwise regression analysis to choose the key variables been considered in the model. In the third stage, K-means is used to divide the data into sub-populations to decrease the effects of noise and rebate complexity of the patterns. At next stage, extraction of Mamdani type fuzzy rule-based system will be carried out for each cluster by means of genetic algorithm and evolutionary strategy. In the fifth stage, we use binary genetic algorithm to rule filtering to remove the redundant rules in order to solve over learning phenomenon. In the sixth stage, we utilize the genetic tuning process to slightly adjust the shape of the membership functions. Last stage is the testing performance of tool and adjusts parameters. This is the first study on using an approximate fuzzy rule base system and evolutionary strategy with the ability of extracting the whole knowledge base of fuzzy expert system for stock price forecasting problems. The superiority and applicability of DEFES are shown for International Business Machines Corporation and compared the outcome with the results of the other methods. Results with MAPE metric and Wilcoxon signed ranks test indicate that DEFES provides more accuracy and outperforms all previous methods, so it can be considered as a superior tool for stock price forecasting problems.

Design and Test Research on Cutting Blade of Corn Harvester Based on Bionic Principle.

PubMed

Tian, Kunpeng; Li, Xianwang; Zhang, Bin; Chen, Qiaomin; Shen, Cheng; Huang, Jicheng

2017-01-01

Existing corn harvester cutting blades have problems associated with large cutting resistance, high energy consumption, and poor cut quality. Using bionics principles, a bionic blade was designed by extracting the cutting tooth profile curve of the B. horsfieldi palate. Using a double-blade cutting device testing system, a single stalk cutting performance contrast test for corn stalks obtained at harvest time was carried out. Results show that bionic blades have superior performance, demonstrated by strong cutting ability and good cut quality. Using statistical analysis of two groups of cutting test data, the average cutting force and cutting energy of bionic blades and ordinary blades were obtained as 480.24 N and 551.31 N and 3.91 J and 4.38 J, respectively. Average maximum cutting force and cutting energy consumption for the bionic blade were reduced by 12.89% and 10.73%, respectively. Variance analysis showed that both blade types had a significant effect on maximum cutting energy and cutting energy required to cut a corn stalk. This demonstrates that bionic blades have better cutting force and energy consumption reduction performance than ordinary blades.

Kolkata Restaurant Problem as a Generalised El Farol Bar Problem

NASA Astrophysics Data System (ADS)

Chakrabarti, Bikas K.

Generalisation of the El Farol bar problem to that of many bars here leads to the Kolkata restaurant problem, where the decision to go to any restaurant or not is much simpler (depending on the previous experience of course, as in the El Farol bar problem). This generalised problem can be exactly analysed in some limiting cases discussed here. The fluctuation in the restaurant service can be shown to have precisely an inverse cubic behavior, as widely seen in the stock market fluctuations.

A model of a fishery with fish stock involving delay equations.

PubMed

Auger, P; Ducrot, Arnaud

2009-12-13

The aim of this paper is to provide a new mathematical model for a fishery by including a stock variable for the resource. This model takes the form of an infinite delay differential equation. It is mathematically studied and a bifurcation analysis of the steady states is fulfilled. Depending on the different parameters of the problem, we show that Hopf bifurcation may occur leading to oscillating behaviours of the system. The mathematical results are finally discussed.

Avian germplasm preservation: embryonic stem cells or primordial germ cells?

PubMed

Petitte, J N

2006-02-01

Presently, avian genetic resources are best maintained as living collections of birds. Unfortunately, these stocks have been under constant pressure to be destroyed because of the decline in the number of Poultry Science Departments and pressures to cut costs at land grant institutions. Cryopreservation of semen is often suggested as a means to bank avian germplasm. However, this is only applicable for single-gene traits and does not allow for full reconstitution of the genetics of the original line. Over the last 15 yr, advances in the manipulation of the early chick embryo, manipulation of primordial germ cells (PGC), and the culture of embryonic stem cells (ESC) suggests that cryopreservation of blastodermal cells, ESC, or PGC might offer a means to preserve the entire genome of highly selected, specialized stocks of poultry. Freezing each of these cell types is possible with varying degrees of efficiency. Similarly, the effectiveness of generating germ line chimeras using blastodermal cells, ESC, or PGC also varies greatly. Other factors that must be considered include the choice of the recipient lines to develop the germ line chimeras and the number of individuals needed to reconstitute the line. Finally, the low efficiency rate of reconstitution and the high cost associated with current technologies makes these approaches prohibitive. Significant challenges remain to be overcome before the entire genome of poultry stocks can be routinely cryoperserved and reconstituted.

A Dangerous Bet on Campus.

ERIC Educational Resources Information Center

Gose, Ben

2000-01-01

Reports on the increasing problem of gambling by college students. Notes that gambling is widely available through Internet gambling sites, illegal sports gambling, state lotteries, and even day trading on the stock market. Suggests that while some students may outgrow the habit with maturity, others might be developing long-term problems. (DB)

Regeneration after cutting of old-growth northern hardwoods in New Hampshire

Treesearch

William B. Leak; Robert W., Jr. Wilson

1958-01-01

Past experience with cuttings in old-growth northern hardwoods has demonstrated that the primary regeneration problem is to obtain a large proportion of desirable species of good quality. Regardless of method or intensity of cutting, the total amount of reproduction usually is adequate. Second-growth stands are a different story: this report pertains only to old-growth...

Prioritizing parts from cutting bills when gang-ripping first

Treesearch

R. Edward Thomas

1996-01-01

Computer optimization of gang-rip-first processing is a difficult problem when working with specific cutting bills. Interactions among board grade and size, arbor setup, and part sizes and quantities greatly complicate the decision making process. Cutting the wrong parts at any moment will mean that more board footage will be required to meet the bill. Using the ROugh...

Cutting strategies and timber yields for unbalanced even-aged northern hardwood forests

Treesearch

William B. Leak; Stanley M. Filip; Stanley M. Filip

1970-01-01

The even-aged hardwood forest, with a poorly balanced distribution of age-classes, can cause perplexing problems during the first rotation. What is the best cutting strategy to follow? By using linear programming, we developed some cutting strategies that maximize board-foot production and produce a balanced age distribution by the end of the first rotation. We...

Finite element simulation of cutting grey iron HT250 by self-prepared Si3N4 ceramic insert

NASA Astrophysics Data System (ADS)

Wang, Bo; Wang, Li; Zhang, Enguang

2017-04-01

The finite element method has been able to simulate and solve practical machining problems, achieve the required accuracy and the highly reliability. In this paper, the simulation models based on the material properties of the self-prepared Si3N4 insert and HT250 were created. Using these models, the results of cutting force, cutting temperature and tool wear rate were obtained, and tool wear mode was predicted after cutting simulation. These approaches may develop as the new method for testing new cutting-tool materials, shortening development cycle and reducing the cost.

Predicting the deforestation-trend under different carbon-prices

PubMed Central

Kindermann, Georg E; Obersteiner, Michael; Rametsteiner, Ewald; McCallum, Ian

2006-01-01

Background Global carbon stocks in forest biomass are decreasing by 1.1 Gt of carbon annually, owing to continued deforestation and forest degradation. Deforestation emissions are partly offset by forest expansion and increases in growing stock primarily in the extra-tropical north. Innovative financial mechanisms would be required to help reducing deforestation. Using a spatially explicit integrated biophysical and socio-economic land use model we estimated the impact of carbon price incentive schemes and payment modalities on deforestation. One payment modality is adding costs for carbon emission, the other is to pay incentives for keeping the forest carbon stock intact. Results Baseline scenario calculations show that close to 200 mil ha or around 5% of todays forest area will be lost between 2006 and 2025, resulting in a release of additional 17.5 GtC. Today's forest cover will shrink by around 500 million hectares, which is 1/8 of the current forest cover, within the next 100 years. The accumulated carbon release during the next 100 years amounts to 45 GtC, which is 15% of the total carbon stored in forests today. Incentives of 6 US$/tC for vulnerable standing biomass payed every 5 year will bring deforestation down by 50%. This will cause costs of 34 billion US$/year. On the other hand a carbon tax of 12 $/tC harvested forest biomass will also cut deforestation by half. The tax income will, if enforced, decrease from 6 billion US$ in 2005 to 4.3 billion US$ in 2025 and 0.7 billion US$ in 2100 due to decreasing deforestation speed. Conclusion Avoiding deforestation requires financial mechanisms that make retention of forests economically competitive with the currently often preferred option to seek profits from other land uses. Incentive payments need to be at a very high level to be effective against deforestation. Taxes on the other hand will extract budgetary revenues from the regions which are already poor. A combination of incentives and taxes could turn out to be a viable solution for this problem. Increasing the value of forest land and thereby make it less easily prone to deforestation would act as a strong incentive to increase productivity of agricultural and fuelwood production, which could be supported by revenues generated by the deforestation tax. PMID:17150095

Predicting the deforestation-trend under different carbon-prices.

PubMed

Kindermann, Georg E; Obersteiner, Michael; Rametsteiner, Ewald; McCallum, Ian

2006-12-06

Global carbon stocks in forest biomass are decreasing by 1.1 Gt of carbon annually, owing to continued deforestation and forest degradation. Deforestation emissions are partly offset by forest expansion and increases in growing stock primarily in the extra-tropical north. Innovative financial mechanisms would be required to help reducing deforestation. Using a spatially explicit integrated biophysical and socio-economic land use model we estimated the impact of carbon price incentive schemes and payment modalities on deforestation. One payment modality is adding costs for carbon emission, the other is to pay incentives for keeping the forest carbon stock intact. Baseline scenario calculations show that close to 200 mil ha or around 5% of today's forest area will be lost between 2006 and 2025, resulting in a release of additional 17.5 GtC. Today's forest cover will shrink by around 500 million hectares, which is 1/8 of the current forest cover, within the next 100 years. The accumulated carbon release during the next 100 years amounts to 45 GtC, which is 15% of the total carbon stored in forests today. Incentives of 6 US$/tC for vulnerable standing biomass payed every 5 year will bring deforestation down by 50%. This will cause costs of 34 billion US$/year. On the other hand a carbon tax of 12 $/tC harvested forest biomass will also cut deforestation by half. The tax income will, if enforced, decrease from 6 billion US$ in 2005 to 4.3 billion US$ in 2025 and 0.7 billion US$ in 2100 due to decreasing deforestation speed. Avoiding deforestation requires financial mechanisms that make retention of forests economically competitive with the currently often preferred option to seek profits from other land uses. Incentive payments need to be at a very high level to be effective against deforestation. Taxes on the other hand will extract budgetary revenues from the regions which are already poor. A combination of incentives and taxes could turn out to be a viable solution for this problem. Increasing the value of forest land and thereby make it less easily prone to deforestation would act as a strong incentive to increase productivity of agricultural and fuelwood production, which could be supported by revenues generated by the deforestation tax.

Stresses around large cut-outs in torsion boxes

NASA Technical Reports Server (NTRS)

Kuhn, Paul; Moggio, Edwin M

1946-01-01

The problem treated here is that of the stresses in a torsion box with a large rectangular cut-out. The theoretical treatment is confined to stresses termed the 'primary stresses.' Comparison of the theoretical results with strain gage data for a series of cut-outs indicates that the primary stresses are probably adequate for designing the major part of the structure, the only important exception being in the design of the cover sheet in the full section adjacent to the cut-out.

Availability of essential drugs for managing HIV-related pain and symptoms within 120 PEPFAR-funded health facilities in East Africa: a cross-sectional survey with onsite verification.

PubMed

Harding, Richard; Simms, Victoria; Penfold, Suzanne; Downing, Julia; Powell, Richard A; Mwangi-Powell, Faith; Namisango, Eve; Moreland, Scott; Gikaara, Nancy; Atieno, Mackuline; Kataike, Jennifer; Nsubuga, Clare; Munene, Grace; Banga, Geoffrey; Higginson, Irene J

2014-04-01

World Health Organization's essential drugs list can control the highly prevalent HIV-related pain and symptoms. Availability of essential medicines directly influences clinicians' ability to effectively manage distressing manifestations of HIV. To determine the availability of pain and symptom controlling drugs in East Africa within President's Emergency Plan for AIDS Relief-funded HIV health care facilities. Directly observed quantitative health facilities' pharmacy stock review. We measured availability, expiration and stock-outs of specified drugs required for routine HIV management, including the World Health Organization pain ladder. A stratified random sample in 120 President's Emergency Plan for AIDS Relief-funded HIV care facilities (referral and district hospitals, health posts/centres and home-based care providers) in Kenya and Uganda. Non-opioid analgesics (73%) and co-trimoxazole (64%) were the most commonly available drugs and morphine (7%) the least. Drug availability was higher in hospitals and lower in health centres, health posts and home-based care facilities. Facilities generally did not use minimum stock levels, and stock-outs were frequently reported. The most common drugs had each been out of stock in the past 6 months in 47% of facilities stocking them. When a minimum stock level was defined, probability of a stock-out in the previous 6 months was 32.6%, compared to 45.5% when there was no defined minimum stock level (χ (2) = 5.07, p = 0.024). The data demonstrate poor essential drug availability, particularly analgesia, limited by facility type. The lack of strong opioids, isoniazid and paediatric formulations is concerning. Inadequate drug availability prevents implementation of simple clinical pain and symptom control protocols, causing unnecessary distress. Research is needed to identify supply chain mechanisms that lead to these problems.

TERRA: Building New Communities for Advanced Biofuels

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cornelius, Joe; Mockler, Todd; Tuinstra, Mitch

ARPA-E’s Transportation Energy Resources from Renewable Agriculture (TERRA) program is bringing together top experts from different disciplines – agriculture, robotics and data analytics – to rethink the production of advanced biofuel crops. ARPA-E Program Director Dr. Joe Cornelius discusses the TERRA program and explains how ARPA-E’s model enables multidisciplinary collaboration among diverse communities. The video focuses on two TERRA projects—Donald Danforth Center and Purdue University—that are developing and integrating cutting-edge remote sensing platforms, complex data analytics tools and plant breeding technologies to tackle the challenge of sustainably increasing biofuel stocks.

Predator response to releases of American shad larvae in the Susquehanna River basin

USGS Publications Warehouse

Johnson, James H.; Ringler, N.H.

1998-01-01

Predation on American shad (Alosa sapidissima) larvae within the first two hours of release was examined from 1989 to 1992 on 31 occasions at stocking sites in the Susquehanna River basin. Twenty-two fish species consumed shad larvae; the dominant predators were spotfin shiner (Cyprinella spiloptera), mimic shiner (Notropis volucellus) and juvenile smallmouth bass (Micropterus dolomieu). The number of shad larvae found in predator stomachs ranged from 0 to 900. Mortality of shad larvae at the stocking site was usually less than 2%. The greatest mortality (9.6%) occurred at the highest stocking level (1.5 million larvae). Highly variable predation rates and release levels of shad insufficient to achieve predator satiation hindered the ability to determine a specific type of functional response of predators. Predator numbers increased with stocking density, indicating short-term aggregation at the release site. Because of practical problems associated with releasing the large numbers of larvae that would be required to satiate predators, routine stocking at these levels is probably unreasonable. Releases of 400,000 to 700,000 larvae may reduce predation by offsetting depensatory mechanisms that operate on small releases and the effects of increased predation due to predator aggregation on large releases. Night stocking may reduce predation on larval shad at the release site.

Availability and quality of anti-malarials among private sector outlets in Myanmar in 2012: results from a large, community-based, cross-sectional survey before a large-scale intervention.

PubMed

Khin, Hnin Su Su; Chen, Ingrid; White, Chris; Sudhinaraset, May; McFarland, Willi; Littrell, Megan; Montagu, Dominic; Aung, Tin

2015-07-14

Global malaria control efforts are threatened by the spread and emergence of artemisinin-resistant Plasmodium falciparum parasites. In 2012, the widespread sale of partial courses of artemisinin-based monotherapy was suspected to take place in the highly accessed, weakly regulated private sector in Myanmar, posing potentially major threats to drug resistance. This study investigated the presence of artemisinin-based monotherapies in the Myanmar private sector, particularly as partial courses of therapy, to inform the targeting of future interventions to stop artemisinin resistance. A large cross-sectional survey comprised of a screening questionnaire was conducted across 26 townships in Myanmar between March and May, 2012. For outlets that stocked anti-malarials at the time of survey, a stock audit was conducted, and for outlets that stocked anti-malarials within 3 months of the survey, a provider survey was conducted. A total of 3,658 outlets were screened, 83% were retailers (pharmacies, itinerant drug vendors and general retailers) and 17% were healthcare providers (private facilities and health workers). Of the 3,658 outlets screened, 1,359 outlets (32%) stocked at least one anti-malarial at the time of study. Oral artemisinin-based monotherapy comprised of 33% of self-reported anti-malarials dispensing volumes found. The vast majority of artemisinin-based monotherapy was sold by retailers, where 63% confirmed that they sold partial courses of therapy by cutting blister packets. Very few retailers (5%) had malaria rapid diagnostic tests available, and quality-assured artemisinin-based combination therapy was virtually nonexistent among retailers. Informal private pharmacies, itinerant drug vendors and general retailers should be targeted for interventions to improve malaria treatment practices in Myanmar, particularly those that threaten the emergence and spread of artemisinin resistance.

A dimensionally split Cartesian cut cell method for hyperbolic conservation laws

NASA Astrophysics Data System (ADS)

Gokhale, Nandan; Nikiforakis, Nikos; Klein, Rupert

2018-07-01

We present a dimensionally split method for solving hyperbolic conservation laws on Cartesian cut cell meshes. The approach combines local geometric and wave speed information to determine a novel stabilised cut cell flux, and we provide a full description of its three-dimensional implementation in the dimensionally split framework of Klein et al. [1]. The convergence and stability of the method are proved for the one-dimensional linear advection equation, while its multi-dimensional numerical performance is investigated through the computation of solutions to a number of test problems for the linear advection and Euler equations. When compared to the cut cell flux of Klein et al., it was found that the new flux alleviates the problem of oscillatory boundary solutions produced by the former at higher Courant numbers, and also enables the computation of more accurate solutions near stagnation points. Being dimensionally split, the method is simple to implement and extends readily to multiple dimensions.

Effect of tool geometry and cutting parameters on delamination and thrust forces in drilling CFRP/Al-Li

NASA Astrophysics Data System (ADS)

El Bouami, Souhail; Habak, Malek; Franz, Gérald; Velasco, Raphaël; Vantomme, Pascal

2016-10-01

Composite materials are increasingly used for structural parts in the aeronautic industries. Carbon Fiber-Reinforced Plastics (CFRP) are often used in combination with metallic materials, mostly aluminium alloys. This raises new problems in aircraft assembly. Delamination is one of these problems. In this study, CFRP/Al-Li stacks is used as experimental material for investigation effect of interaction of cutting parameters (cutting speed and feed rate) and tool geometry on delamination and thrust forces in drilling operation. A plan of experiments, based on Taguchi design method, was employed to investigate the influence of tool geometry and in particular the point angle and cutting parameters on delamination and axial effort. The experimental results demonstrate that the feed rate is the major parameter and the importance of tool point angle in delamination and thrust forces in the stacks were shown.

An Interactive Artificial Cutting Plane Method for Bicriterion Integer Programming Problems

DTIC Science & Technology

1992-08-01

AUTHOR(S) Diane Breivik Allen, 1st Lt 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) 8. PERFORMING ORGANIZATION REPORT NUMBER AFIT Student Attending...INTERACTIVE ARTIFICIAL CUTTING PLANE METHOD FOR BICRITERION INTEGER PROGRAMMING PROBLEMS By Diane Breivik Allen A Thesis Submitted to the Faculty of...ITfiSRA&1 DTIC TAB 0 Unannounced 0 Justirication By BY Diane Breivik Allen Distributlon/ Availability CQdes Avail and/or Dist Special Approved: DTI

Rapid tree carbon stock recovery in managed Amazonian forests.

PubMed

Rutishauser, Ervan; Hérault, Bruno; Baraloto, Christopher; Blanc, Lilian; Descroix, Laurent; Sotta, Eleneide Doff; Ferreira, Joice; Kanashiro, Milton; Mazzei, Lucas; d'Oliveira, Marcus V N; de Oliveira, Luis C; Peña-Claros, Marielos; Putz, Francis E; Ruschel, Ademir R; Rodney, Ken; Roopsind, Anand; Shenkin, Alexander; da Silva, Katia E; de Souza, Cintia R; Toledo, Marisol; Vidal, Edson; West, Thales A P; Wortel, Verginia; Sist, Plinio

2015-09-21

While around 20% of the Amazonian forest has been cleared for pastures and agriculture, one fourth of the remaining forest is dedicated to wood production. Most of these production forests have been or will be selectively harvested for commercial timber, but recent studies show that even soon after logging, harvested stands retain much of their tree-biomass carbon and biodiversity. Comparing species richness of various animal taxa among logged and unlogged forests across the tropics, Burivalova et al. found that despite some variability among taxa, biodiversity loss was generally explained by logging intensity (the number of trees extracted). Here, we use a network of 79 permanent sample plots (376 ha total) located at 10 sites across the Amazon Basin to assess the main drivers of time-to-recovery of post-logging tree carbon (Table S1). Recovery time is of direct relevance to policies governing management practices (i.e., allowable volumes cut and cutting cycle lengths), and indirectly to forest-based climate change mitigation interventions. Copyright © 2015 Elsevier Ltd. All rights reserved.

Root anatomy and element distribution vary between two Salix caprea isolates with different Cd accumulation capacities

PubMed Central

Vaculík, Marek; Konlechner, Cornelia; Langer, Ingrid; Adlassnig, Wolfram; Puschenreiter, Markus; Lux, Alexander; Hauser, Marie-Theres

2012-01-01

The understanding of the influence of toxic elements on root anatomy and element distribution is still limited. This study describes anatomical responses, metal accumulation and element distribution of rooted cuttings of Salix caprea after exposure to Cd and/or Zn. Differences in the development of apoplastic barriers and tissue organization in roots between two distinct S. caprea isolates with divergent Cd uptake and accumulation capacities in leaves might reflect an adaptive predisposition based on different natural origins. Energy-dispersive X-ray spectroscopy (EDX) revealed that Cd and Zn interfered with the distribution of elements in a tissue- and isolate-specific manner. Zinc, Ca, Mg, Na and Si were enriched in the peripheral bark, K and S in the phloem and Cd in both vascular tissues. Si levels were lower in the superior Cd translocator. Since the cuttings originated from stocks isolated from polluted and unpolluted sites we probably uncovered different strategies against toxic elements. PMID:22325439

Black-Litterman model on non-normal stock return (Case study four banks at LQ-45 stock index)

NASA Astrophysics Data System (ADS)

Mahrivandi, Rizki; Noviyanti, Lienda; Setyanto, Gatot Riwi

2017-03-01

The formation of the optimal portfolio is a method that can help investors to minimize risks and optimize profitability. One model for the optimal portfolio is a Black-Litterman (BL) model. BL model can incorporate an element of historical data and the views of investors to form a new prediction about the return of the portfolio as a basis for preparing the asset weighting models. BL model has two fundamental problems, the assumption of normality and estimation parameters on the market Bayesian prior framework that does not from a normal distribution. This study provides an alternative solution where the modelling of the BL model stock returns and investor views from non-normal distribution.

Physiological, vascular and nanomechanical assessment of hybrid poplar leaf traits in micropropagated plants and plants propagated from root cuttings: A contribution to breeding programs.

PubMed

Ďurkovič, Jaroslav; Husárová, Hana; Javoříková, Lucia; Čaňová, Ingrid; Šuleková, Miriama; Kardošová, Monika; Lukáčik, Ivan; Mamoňová, Miroslava; Lagaňa, Rastislav

2017-09-01

Micropropagated plants experience significant stress from rapid water loss when they are transferred from an in vitro culture to either greenhouse or field conditions. This is caused both by inefficient stomatal control of transpiration and the change to a higher light intensity and lower humidity. Understanding the physiological, vascular and biomechanical processes that allow micropropagated plants to modify their phenotype in response to environmental conditions can help to improve both field performance and plant survival. To identify changes between the hybrid poplar [Populus tremula × (Populus × canescens)] plants propagated from in vitro tissue culture and those from root cuttings, we assessed leaf performance for any differences in leaf growth, photosynthetic and vascular traits, and also nanomechanical properties of the tracheary element cell walls. The micropropagated plants showed significantly higher values for leaf area, leaf length, leaf width and leaf dry mass. The greater leaf area and leaf size dimensions resulted from the higher transpiration rate recorded for this stock type. Also, the micropropagated plants reached higher values for chlorophyll a fluorescence parameters and for the nanomechanical dissipation energy of tracheary element cell walls which may indicate a higher damping capacity within the primary xylem tissue under abiotic stress conditions. The performance of the plants propagated from root cuttings was superior for instantaneous water-use efficiency which signifies a higher acclimation capacity to stressful conditions during a severe drought particularly for this stock type. Similarities were found among the majority of the examined leaf traits for both vegetative plant origins including leaf mass per area, stomatal conductance, net photosynthetic rate, hydraulic axial conductivity, indicators of leaf midrib vascular architecture, as well as for the majority of cell wall nanomechanical traits. This research revealed that there were no drawbacks in the leaf physiological performance which could be attributed to the micropropagated plants of fast growing hybrid poplar. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

The effect of a radial neck notch on press-fit stem stability: a biomechanical study on 7 cadavers.

PubMed

Shukla, Dave R; Sahu, Dipit C; Fitzsimmons, James S; An, Kai-Nan; O'Driscoll, Shawn W

2018-03-01

Minimal micromotion is necessary for osteointegration of cementless radial head prostheses. When radial head fractures extend longitudinally, where the neck cut for prosthetic replacement should be made is uncertain. We hypothesized that complete resection of the notched portion of a radial neck confers no advantage in initial stability compared with not resecting the defect and inserting the implant into a notched radial neck. The radii of 7 cadavers underwent radial head resection and implantation with a 25-mm-long press-fit radial head stem. Before implantation, a 5-mm-long notch that was less than 1-mm wide was made in the radial neck. After the stem-bone micromotion was recorded, the proximal 5 mm of radial neck, incorporating the entire notch, was cut away, the stem was inserted 5 mm further, and the resulting micromotion was recorded. The mean micromotion measured in the presence of a cortical notch was 51 ± 6 µm. After the neck was circumferentially cut and the stem was advanced, the micromotion (46 ± 9 µm) was not statistically significantly different. Initial stability of an adequately sized cementless stem in the presence of a 5-mm-long cortical notch was well within the threshold needed for bone ingrowth (<100 µm). In addition, there was no reduction of micromotion after the notch-containing portion of the radial neck was resected and the stem was advanced. Making a neck cut distal to a 5-mm-long, 1-mm-wide cortical notch does not confer added stability. Thus, surgeons can preserve bone stock and avoid an aggressive neck cut. Copyright © 2017 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

Performance of a commercial serum ELISA for the detection of antibodies to Neospora caninum in whole and skim milk samples.

PubMed

Byrem, T M; Bartlett, P C; Donohue, H; Voisinet, B D; Houseman, J T

2012-11-23

Control of Neospora caninum infection in cattle depends on specific, ante-mortem detection of infected animals and limiting their use as breeding stock or by culling. The objective of the present study was to determine appropriate cut-off values and diagnostic performance of a milk ELISA test using whole and skim milk in a commercial serum ELISA test (IDEXX Neospora Ab). Serum and milk samples were obtained from a total of 475 lactating cows from two herds with and two herds without a previous history of N. caninum-associated abortion. Overall seroprevalence determined by the ELISA was 18.3%. Compared to serum ELISA values, correlation and overall performance assessed by receiver operating characteristic analysis was higher when either whole or skim milk samples were diluted 1:2 compared to undiluted or 1:5 diluted samples. Diagnostic performance for analysis of whole and skim milk was compared at cut-off values that achieved a desired operating characteristic of at least 95% specificity. For whole milk diluted 1:2 and a cut-off of 0.14 (S/P ratio), sensitivity and kappa values were 74.7% (95% CI 64.3-83.4) and 0.70 (95% CI 0.61-0.78), respectively. For skim milk diluted 1:2 and a cut-off of 0.30, sensitivity and kappa values were 77.0% (95% CI 66.8-85.4) and 0.72 (95% CI 0.64-0.80), respectively. Using the selected cut-offs, the IDEXX Neospora Ab Test is equally suited for the analysis of whole and skim milk as a screening tool in neosporosis control programs. Copyright © 2012 Elsevier B.V. All rights reserved.

[Stock based medicine: the patient waiting in a weary medical procedure].

PubMed

Casas Patiño, Donovan; Rodriguez Torres, Alejandra; Casas Patiño, Isaac

2015-03-24

This essay attempts to bring on a new perspective for healthcare professionals regarding the problems that surround this institutionalized profession, based on a system of stock balances and not on the real needs of patients and their community. The healthcare professional not only engages in biomedical healing but also possesses knowledge and expertise regarding the dialectical process of health/disease. Thus, his or her practice and actions should be centered on social practices and not just the healing process.

RAT Requisition Approval Team - A L6S Initiative

NASA Technical Reports Server (NTRS)

Hall, Valerie

2004-01-01

L6S Project Description - Problem: The current cycle time for generating and approving Requisitions does not meet "Best-In-Class." . Scope: Only looking at the Florida Requisition Approval process for Orbiter (ORBF & ORBG) and Ground (GFAC) stocked items. This includes the time from when a requirement is generated by Logistics Planning and Supportability in Florida until it is approved and received by Procurement. Requisitions generated at other sites or for non stocked items will be out of scope of this Project

Stock-car racing makes intuitive physicists

NASA Astrophysics Data System (ADS)

Gwynne, Peter

2008-03-01

Formula One races involve cars festooned with gadgets and complex electronic devices, in which millions of dollars are spent refining a vehicle's aerodynamics and reducing its weight. But in events run by America's National Association of Stock Car Auto Racing (NASCAR), cars hurtle round an oval track at speeds of about 300 km h-1 without the help of the complex sensors that are employed in Formula One cars. To avoid crashing, drivers must make their own adjustments to track conditions, engine problems and the traffic around them.

The effects of methyltestosterone on sex reversal in bluegill

USGS Publications Warehouse

Chew, L.E.; Stanley, J.G.

1973-01-01

Small impoundments stocked with bluegill often become overcrowded with small, undesirable fish. This problem would be prevented if it were possible to stock only one sex, but sexing of small bluegill is difficult and unreliable. Monosex broods in Oryzias latipes [3], Tilapia mossambica [1], and Carassius auratus [5] can be produced by using sperm from sex-reversed genotypic females to fertilize eggs from normal females. The objective of this research was to develop a method for changing sex in bluegill fry by administering androgens.

Aerated drilling cutting transport analysis in geothermal well

NASA Astrophysics Data System (ADS)

Wakhyudin, Aris; Setiawan, Deni; Dwi Marjuan, Oscar

2017-12-01

Aeratad drilling widely used for geothermal drilling especially when drilled into predicted production zone. Aerated drilling give better performance on preventing lost circulation problem, improving rate of penetration, and avoiding drilling fluid invasion to productive zone. While well is drilled, cutting is produced and should be carried to surface by drilling fluid. Hole problem, especially pipe sticking will occur while the cutting is not lifted properly to surface. The problem will effect on drilling schedule; non-productive time finally result more cost to be spent. Geothermal formation has different characteristic comparing oil and gas formation. Geothermal mainly has igneous rock while oil and gas mostly sedimentary rock. In same depth, formation pressure in geothermal well commonly lower than oil and gas well while formation temperature geothermal well is higher. While aerated drilling is applied in geothermal well, Igneous rock density has higher density than sedimentary rock and aerated drilling fluid is lighter than water based mud hence minimum velocity requirement to transport cutting is larger than in oil/gas well drilling. Temperature and pressure also has impact on drilling fluid (aerated) density. High temperature in geothermal well decrease drilling fluid density hence the effect of pressure and temperature also considered. In this paper, Aerated drilling cutting transport performance on geothermal well will be analysed due to different rock and drilling fluid density. Additionally, temperature and pressure effect on drilling fluid density also presented to merge.

Substructure method in high-speed monorail dynamic problems

NASA Astrophysics Data System (ADS)

Ivanchenko, I. I.

2008-12-01

The study of actions of high-speed moving loads on bridges and elevated tracks remains a topical problem for transport. In the present study, we propose a new method for moving load analysis of elevated tracks (monorail structures or bridges), which permits studying the interaction between two strained objects consisting of rod systems and rigid bodies with viscoelastic links; one of these objects is the moving load (monorail rolling stock), and the other is the carrying structure (monorail elevated track or bridge). The methods for moving load analysis of structures were developed in numerous papers [1-15]. At the first stage, when solving the problem about a beam under the action of the simplest moving load such as a moving weight, two fundamental methods can be used; the same methods are realized for other structures and loads. The first method is based on the use of a generalized coordinate in the expansion of the deflection in the natural shapes of the beam, and the problem is reduced to solving a system of ordinary differential equations with variable coefficients [1-3]. In the second method, after the "beam-weight" system is decomposed, just as in the problem with the weight impact on the beam [4], solving the problem is reduced to solving an integral equation for the dynamic weight reaction [6, 7]. In [1-3], an increase in the number of retained forms leads to an increase in the order of the system of equations; in [6, 7], difficulties arise when solving the integral equations related to the conditional stability of the step procedures. The method proposed in [9, 14] for beams and rod systems combines the above approaches and eliminates their drawbacks, because it permits retaining any necessary number of shapes in the deflection expansion and has a resolving system of equations with an unconditionally stable integration scheme and with a minimum number of unknowns, just as in the method of integral equations [6, 7]. This method is further developed for combined schemes modeling a strained elastic compound moving structure and a monorail elevated track. The problems of development of methods for dynamic analysis of monorails are very topical, especially because of increasing speeds of the rolling stock motion. These structures are studied in [16-18]. In the present paper, the above problem is solved by using the method for the moving load analysis and a step procedure of integration with respect to time, which were proposed in [9, 19], respectively. Further, these components are used to enlarge the possibilities of the substructure method in problems of dynamics. In the approach proposed for moving load analysis of structures, for a substructure (having the shape of a boundary element or a superelement) we choose an object moving at a constant speed (a monorail rolling stock); in this case, we use rod boundary elements of large length, which are gathered in a system modeling these objects. In particular, sets of such elements form a model of a monorail rolling stock, namely, carriage hulls, wheeled carts, elements of the wheel spring suspension, models of continuous beams of monorail ways and piers with foundations admitting emergency subsidence and unilateral links. These specialized rigid finite elements with linear and nonlinear links, included into the set of earlier proposed finite elements [14, 19], permit studying unsteady vibrations in the "monorail train-elevated track" (MTET) system taking into account various irregularities on the beam-rail, the pier emergency subsidence, and their elastic support by the basement. In this case, a high degree of the structure spatial digitization is obtained by using rods with distributed parameters in the analysis. The displacements are approximated by linear functions and trigonometric Fourier series, which, as was already noted, permits increasing the number of degrees of freedom of the system under study simultaneously preserving the order of the resolving system of equations. This approach permits studying the stress-strain state in the MTET system and determining accelerations at the desired points of the rolling stock. The proposed numerical procedure permits uniquely solving linear and nonlinear differential equations describing the operation of the model, which replaces the system by a monorail rolling stock consisting of several specialized mutually connected cars and a system of continuous beams on elastic inertial supports. This approach (based on the use of a moving substructure, which is also modeled by a system of boundary rod elements) permits maximally reducing the number of unknowns in the resolving system of equations at each step of its solution [11]. The authors of the preceding investigations of this problem, when studying the simultaneous vibrations of bridges and moving loads, considered only the case in which the rolling stock was represented by sufficiently complicated systems of rigid bodies connected by viscoelastic links [3-18] and the rolling stock motion was described by systems of ordinary differential equations. A specific characteristic of the proposed method is that it is convenient to derive the equations of motion of both the rolling stock and the bridge structure. The method [9, 14] permits obtaining the equations of interaction between the structures as two separate finite-element structures. Hence the researcher need not traditionally write out the system of equations of motion, for example, for the rolling stock (of cars) with finitely many degrees of freedom [3-18].We note several papers where simultaneous vibrations of an elastic moving load and an elastic carrying structure are considered in a rather narrow region and have a specific character. For example, the motion of an elastic rod along an elastic infinite rod on an elastic foundation is studied in [20], and the body of a car moving along a beam is considered as a rod with ten concentrated masses in [21].

SMS for Life: a pilot project to improve anti-malarial drug supply management in rural Tanzania using standard technology

PubMed Central

2010-01-01

Background Maintaining adequate supplies of anti-malarial medicines at the health facility level in rural sub-Saharan Africa is a major barrier to effective management of the disease. Lack of visibility of anti-malarial stock levels at the health facility level is an important contributor to this problem. Methods A 21-week pilot study, 'SMS for Life', was undertaken during 2009-2010 in three districts of rural Tanzania, involving 129 health facilities. Undertaken through a collaborative partnership of public and private institutions, SMS for Life used mobile telephones, SMS messages and electronic mapping technology to facilitate provision of comprehensive and accurate stock counts from all health facilities to each district management team on a weekly basis. The system covered stocks of the four different dosage packs of artemether-lumefantrine (AL) and quinine injectable. Results Stock count data was provided in 95% of cases, on average. A high response rate (≥ 93%) was maintained throughout the pilot. The error rate for composition of SMS responses averaged 7.5% throughout the study; almost all errors were corrected and messages re-sent. Data accuracy, based on surveillance visits to health facilities, was 94%. District stock reports were accessed on average once a day. The proportion of health facilities with no stock of one or more anti-malarial medicine (i.e. any of the four dosages of AL or quinine injectable) fell from 78% at week 1 to 26% at week 21. In Lindi Rural district, stock-outs were eliminated by week 8 with virtually no stock-outs thereafter. During the study, AL stocks increased by 64% and quinine stock increased 36% across the three districts. Conclusions The SMS for Life pilot provided visibility of anti-malarial stock levels to support more efficient stock management using simple and widely available SMS technology, via a public-private partnership model that worked highly effectively. The SMS for Life system has the potential to alleviate restricted availability of anti-malarial drugs or other medicines in rural or under-resourced areas. PMID:20979633

SMS for Life: a pilot project to improve anti-malarial drug supply management in rural Tanzania using standard technology.

PubMed

Barrington, Jim; Wereko-Brobby, Olympia; Ward, Peter; Mwafongo, Winfred; Kungulwe, Seif

2010-10-27

Maintaining adequate supplies of anti-malarial medicines at the health facility level in rural sub-Saharan Africa is a major barrier to effective management of the disease. Lack of visibility of anti-malarial stock levels at the health facility level is an important contributor to this problem. A 21-week pilot study, 'SMS for Life', was undertaken during 2009-2010 in three districts of rural Tanzania, involving 129 health facilities. Undertaken through a collaborative partnership of public and private institutions, SMS for Life used mobile telephones, SMS messages and electronic mapping technology to facilitate provision of comprehensive and accurate stock counts from all health facilities to each district management team on a weekly basis. The system covered stocks of the four different dosage packs of artemether-lumefantrine (AL) and quinine injectable. Stock count data was provided in 95% of cases, on average. A high response rate (≥ 93%) was maintained throughout the pilot. The error rate for composition of SMS responses averaged 7.5% throughout the study; almost all errors were corrected and messages re-sent. Data accuracy, based on surveillance visits to health facilities, was 94%. District stock reports were accessed on average once a day. The proportion of health facilities with no stock of one or more anti-malarial medicine (i.e. any of the four dosages of AL or quinine injectable) fell from 78% at week 1 to 26% at week 21. In Lindi Rural district, stock-outs were eliminated by week 8 with virtually no stock-outs thereafter. During the study, AL stocks increased by 64% and quinine stock increased 36% across the three districts. The SMS for Life pilot provided visibility of anti-malarial stock levels to support more efficient stock management using simple and widely available SMS technology, via a public-private partnership model that worked highly effectively. The SMS for Life system has the potential to alleviate restricted availability of anti-malarial drugs or other medicines in rural or under-resourced areas.

A multiobjective optimization model and an orthogonal design-based hybrid heuristic algorithm for regional urban mining management problems.

PubMed

Wu, Hao; Wan, Zhong

2018-02-01

In this paper, a multiobjective mixed-integer piecewise nonlinear programming model (MOMIPNLP) is built to formulate the management problem of urban mining system, where the decision variables are associated with buy-back pricing, choices of sites, transportation planning, and adjustment of production capacity. Different from the existing approaches, the social negative effect, generated from structural optimization of the recycling system, is minimized in our model, as well as the total recycling profit and utility from environmental improvement are jointly maximized. For solving the problem, the MOMIPNLP model is first transformed into an ordinary mixed-integer nonlinear programming model by variable substitution such that the piecewise feature of the model is removed. Then, based on technique of orthogonal design, a hybrid heuristic algorithm is developed to find an approximate Pareto-optimal solution, where genetic algorithm is used to optimize the structure of search neighborhood, and both local branching algorithm and relaxation-induced neighborhood search algorithm are employed to cut the searching branches and reduce the number of variables in each branch. Numerical experiments indicate that this algorithm spends less CPU (central processing unit) time in solving large-scale regional urban mining management problems, especially in comparison with the similar ones available in literature. By case study and sensitivity analysis, a number of practical managerial implications are revealed from the model. Since the metal stocks in society are reliable overground mineral sources, urban mining has been paid great attention as emerging strategic resources in an era of resource shortage. By mathematical modeling and development of efficient algorithms, this paper provides decision makers with useful suggestions on the optimal design of recycling system in urban mining. For example, this paper can answer how to encourage enterprises to join the recycling activities by government's support and subsidies, whether the existing recycling system can meet the developmental requirements or not, and what is a reasonable adjustment of production capacity.

Online machining error estimation method of numerical control gear grinding machine tool based on data analysis of internal sensors

NASA Astrophysics Data System (ADS)

Zhao, Fei; Zhang, Chi; Yang, Guilin; Chen, Chinyin

2016-12-01

This paper presents an online estimation method of cutting error by analyzing of internal sensor readings. The internal sensors of numerical control (NC) machine tool are selected to avoid installation problem. The estimation mathematic model of cutting error was proposed to compute the relative position of cutting point and tool center point (TCP) from internal sensor readings based on cutting theory of gear. In order to verify the effectiveness of the proposed model, it was simulated and experimented in gear generating grinding process. The cutting error of gear was estimated and the factors which induce cutting error were analyzed. The simulation and experiments verify that the proposed approach is an efficient way to estimate the cutting error of work-piece during machining process.

Minimization of energy and surface roughness of the products machined by milling

NASA Astrophysics Data System (ADS)

Belloufi, A.; Abdelkrim, M.; Bouakba, M.; Rezgui, I.

2017-08-01

Metal cutting represents a large portion in the manufacturing industries, which makes this process the largest consumer of energy. Energy consumption is an indirect source of carbon footprint, we know that CO2 emissions come from the production of energy. Therefore high energy consumption requires a large production, which leads to high cost and a large amount of CO2 emissions. At this day, a lot of researches done on the Metal cutting, but the environmental problems of the processes are rarely discussed. The right selection of cutting parameters is an effective method to reduce energy consumption because of the direct relationship between energy consumption and cutting parameters in machining processes. Therefore, one of the objectives of this research is to propose an optimization strategy suitable for machining processes (milling) to achieve the optimum cutting conditions based on the criterion of the energy consumed during the milling. In this paper the problem of energy consumed in milling is solved by an optimization method chosen. The optimization is done according to the different requirements in the process of roughing and finishing under various technological constraints.

The American Quarter Horse: Population Structure and Relationship to the Thoroughbred

PubMed Central

2014-01-01

A breed known for its versatility, the American Quarter Horse (QH), is increasingly bred for performance in specific disciplines. The impact of selective breeding on the diversity and structure of the QH breed was evaluated using pedigree analysis and genome-wide SNP data from horses representing 6 performance groups (halter, western pleasure, reining, working cow, cutting, and racing). Genotype data (36 037 single nucleotide polymorphisms [SNPs]) from 36 Thoroughbreds were also evaluated with those from the 132 performing QHs to evaluate the Thoroughbred’s influence on QH diversity. Results showed significant population structure among all QH performance groups excepting the comparison between the cutting and working cow horses; divergence was greatest between the cutting and racing QHs, the latter of which had a large contribution of Thoroughbred ancestry. Significant coancestry and the potential for inbreeding exist within performance groups, especially when considering the elite performers. Relatedness within performance groups is increasing with popular sires contributing disproportionate levels of variation to each discipline. Expected heterozygosity, inbreeding, F ST, cluster, and haplotype analyses suggest these QHs can be broadly classified into 3 categories: stock, racing, and pleasure/halter. Although the QH breed as a whole contains substantial genetic diversity, current breeding practices have resulted in this variation being sequestered into subpopulations. PMID:24293614

Calculation of Water Entry Problem for Free-falling Bodies Using a Developed Cartesian Cut Cell Mesh

NASA Astrophysics Data System (ADS)

Wenhua, Wang; Yanying, Wang

2010-05-01

This paper describes the development of free surface capturing method on Cartesian cut cell mesh to water entry problem for free-falling bodies with body-fluid interaction. The incompressible Euler equations for a variable density fluid system are presented as governing equations and the free surface is treated as a contact discontinuity by using free surface capturing method. In order to be convenient for dealing with the problem with moving body boundary, the Cartesian cut cell technique is adopted for generating the boundary-fitted mesh around body edge by cutting solid regions out of a background Cartesian mesh. Based on this mesh system, governing equations are discretized by finite volume method, and at each cell edge inviscid flux is evaluated by means of Roe's approximate Riemann solver. Furthermore, for unsteady calculation in time domain, a time accurate solution is achieved by a dual time-stepping technique with artificial compressibility method. For the body-fluid interaction, the projection method of momentum equations and exact Riemann solution are applied in the calculation of fluid pressure on the solid boundary. Finally, the method is validated by test case of water entry for free-falling bodies.

Portfolio Optimization with Stochastic Dividends and Stochastic Volatility

ERIC Educational Resources Information Center

Varga, Katherine Yvonne

2015-01-01

We consider an optimal investment-consumption portfolio optimization model in which an investor receives stochastic dividends. As a first problem, we allow the drift of stock price to be a bounded function. Next, we consider a stochastic volatility model. In each problem, we use the dynamic programming method to derive the Hamilton-Jacobi-Bellman…

Solving portfolio selection problems with minimum transaction lots based on conditional-value-at-risk

NASA Astrophysics Data System (ADS)

Setiawan, E. P.; Rosadi, D.

2017-01-01

Portfolio selection problems conventionally means ‘minimizing the risk, given the certain level of returns’ from some financial assets. This problem is frequently solved with quadratic or linear programming methods, depending on the risk measure that used in the objective function. However, the solutions obtained by these method are in real numbers, which may give some problem in real application because each asset usually has its minimum transaction lots. In the classical approach considering minimum transaction lots were developed based on linear Mean Absolute Deviation (MAD), variance (like Markowitz’s model), and semi-variance as risk measure. In this paper we investigated the portfolio selection methods with minimum transaction lots with conditional value at risk (CVaR) as risk measure. The mean-CVaR methodology only involves the part of the tail of the distribution that contributed to high losses. This approach looks better when we work with non-symmetric return probability distribution. Solution of this method can be found with Genetic Algorithm (GA) methods. We provide real examples using stocks from Indonesia stocks market.

Effects of harvest management practices on forest biomass and soil carbon in eucalypt forests in New South Wales, Australia: Simulations with the forest succession model LINKAGES

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ranatunga, Kemachandra; Keenan, Rodney J.; Wullschleger, Stan D

2008-01-01

Understanding long-term changes in forest ecosystem carbon stocks under forest management practices such as timber harvesting is important for assessing the contribution of forests to the global carbon cycle. Harvesting effects are complicated by the amount, type, and condition of residue left on-site, the decomposition rate of this residue, the incorporation of residue into soil organic matter and the rate of new detritus input to the forest floor from regrowing vegetation. In an attempt to address these complexities, the forest succession model LINKAGES was used to assess the production of aboveground biomass, detritus, and soil carbon stocks in native Eucalyptusmore » forests as influenced by five harvest management practices in New South Wales, Australia. The original decomposition sub-routines of LINKAGES were modified by adding components of the Rothamsted (RothC) soil organic matter turnover model. Simulation results using the new model were compared to data from long-term forest inventory plots. Good agreement was observed between simulated and measured above-ground biomass, but mixed results were obtained for basal area. Harvesting operations examined included removing trees for quota sawlogs (QSL, DBH >80 cm), integrated sawlogs (ISL, DBH >20 cm) and whole-tree harvesting in integrated sawlogs (WTH). We also examined the impact of different cutting cycles (20, 50 or 80 years) and intensities (removing 20, 50 or 80 m{sup 3}). Generally medium and high intensities of shorter cutting cycles in sawlog harvesting systems produced considerably higher soil carbon values compared to no harvesting. On average, soil carbon was 2-9% lower in whole-tree harvest simulations whereas in sawlog harvest simulations soil carbon was 5-17% higher than in no harvesting.« less

Development of a 2-stage shear-cutting-process to reduce cut-edge-sensitivity of steels

NASA Astrophysics Data System (ADS)

Gläsner, T.; Sunderkötter, C.; Hoffmann, H.; Volk, W.; Golle, R.

2017-09-01

The edge cracking sensitivity of AHSS and UHSS is a challenging factor in the cold forming process. Expanding cut holes during flanging operations is rather common in automotive components. During these flanging operations the pierced hole is stretched so that its diameter is increased. These flanging operations stretch material that has already been subjected to large amounts of plastic deformation, therefore forming problems may occur. An innovative cutting process decreases micro cracks in the cutting surface and facilitates the subsequent cold forming process. That cutting process consists of two stages, which produces close dimensional tolerance and smooth edges. As a result the hole expanding ratio was increased by nearly 100 % when using thick high strength steels for suspension components. The paper describes the mechanisms of the trimming process at the cut edge, and the positive effect of the 2-stage shear-cutting process on the hole extension capability of multiphase steels.

Study on the effectiveness of Extreme Cold Mist MQL system on turning process of stainless steel AISI 316

NASA Astrophysics Data System (ADS)

Jamaludin, A. S.; Hosokawa, A.; Furumoto, T.; Koyano, T.; Hashimoto, Y.

2018-03-01

Cutting process of difficult-to-cut material such as stainless steel, generates immensely excessive heat, which is one of the major causes related to shortening tool life and lower quality of surface finish. It is proven that application of cutting fluid during the cutting process of difficult-to-cut material is able to improve the cutting performance, but excessive application of cutting fluid leads to another problem such as increasing processing cost and environmental hazardous pollution of workplace. In the study, Extreme Cold Mist system is designed and tested along with various Minimum Quantity Lubrication (MQL) systems on turning process of stainless steel AISI 316. In the study, it is obtained that, Extreme Cold Mist system is able to reduce cutting force up to 60N and improve the surface roughness of the machined surface significantly.

Prediction of Cutting Force in Turning Process-an Experimental Approach

NASA Astrophysics Data System (ADS)

Thangarasu, S. K.; Shankar, S.; Thomas, A. Tony; Sridhar, G.

2018-02-01

This Paper deals with a prediction of Cutting forces in a turning process. The turning process with advanced cutting tool has a several advantages over grinding such as short cycle time, process flexibility, compatible surface roughness, high material removal rate and less environment problems without the use of cutting fluid. In this a full bridge dynamometer has been used to measure the cutting forces over mild steel work piece and cemented carbide insert tool for different combination of cutting speed, feed rate and depth of cut. The experiments are planned based on taguchi design and measured cutting forces were compared with the predicted forces in order to validate the feasibility of the proposed design. The percentage contribution of each process parameter had been analyzed using Analysis of Variance (ANOVA). Both the experimental results taken from the lathe tool dynamometer and the designed full bridge dynamometer were analyzed using Taguchi design of experiment and Analysis of Variance.

The influence of external subsidies on diet, growth and Hg concentrations of freshwater sport fish: implications for management and fish consumption advisories

USGS Publications Warehouse

Lepak, J.M.; Hooten, M.B.; Johnson, B.M.

2012-01-01

Mercury (Hg) contamination in sport fish is a global problem. In freshwater systems, food web structure, sport fish sex, size, diet and growth rates influence Hg bioaccumulation. Fish stocking is a common management practice worldwide that can introduce external energy and contaminants into freshwater systems. Thus, stocking can alter many of the factors that influence Hg concentrations in sport fish. Here we evaluated the influence of external subsidies, in the form of hatchery-raised rainbow trout Oncorhynchus mykiss on walleye Sander vitreus diet, growth and Hg concentrations in two freshwater systems. Stocking differentially influenced male and female walleye diets and growth, producing a counterintuitive size-contamination relationship. Modeling indicated that walleye growth rate and diet were important explanatory variables when predicting Hg concentrations. Thus, hatchery contributions to freshwater systems in the form of energy and contaminants can influence diet, growth and Hg concentrations in sport fish. Given the extensive scale of fish stocking, and the known health risks associated with Hg contamination, this represents a significant issue for managers monitoring and manipulating freshwater food web structures, and policy makers attempting to develop fish consumption advisories to protect human health in stocked systems.

The influence of external subsidies on diet, growth and Hg concentrations of freshwater sport fish: implications for management and fish consumption advisories.

PubMed

Lepak, Jesse M; Hooten, Mevin B; Johnson, Brett M

2012-10-01

Mercury (Hg) contamination in sport fish is a global problem. In freshwater systems, food web structure, sport fish sex, size, diet and growth rates influence Hg bioaccumulation. Fish stocking is a common management practice worldwide that can introduce external energy and contaminants into freshwater systems. Thus, stocking can alter many of the factors that influence Hg concentrations in sport fish. Here we evaluated the influence of external subsidies, in the form of hatchery-raised rainbow trout Oncorhynchus mykiss on walleye Sander vitreus diet, growth and Hg concentrations in two freshwater systems. Stocking differentially influenced male and female walleye diets and growth, producing a counterintuitive size-contamination relationship. Modeling indicated that walleye growth rate and diet were important explanatory variables when predicting Hg concentrations. Thus, hatchery contributions to freshwater systems in the form of energy and contaminants can influence diet, growth and Hg concentrations in sport fish. Given the extensive scale of fish stocking, and the known health risks associated with Hg contamination, this represents a significant issue for managers monitoring and manipulating freshwater food web structures, and policy makers attempting to develop fish consumption advisories to protect human health in stocked systems.

Stuttering

MedlinePlus

... problems or developmental delays. Differences in the brain's processing of language: People who stutter process language in ... doctor. © 1995- The Nemours Foundation. All rights reserved. Images provided by The Nemours Foundation, iStock, Getty Images, ...

Calculation of high-rise construction limitations for non-resident housing fund in megacities

NASA Astrophysics Data System (ADS)

Iliashenko, Oksana; Krasnov, Sergey; Sergeev, Sergey

2018-03-01

The paper is devoted to topical issues of urban planning in terms of high-rise construction of a non-resident housing stock in relation to megacities. We consider this issue taking into account the limitations of natural, communal and social resources. The problem is especially acute for the overwhelming majority of the state capitals, as well as cities with historical heritage that are of great interest due to the rapid development of tourism and the high mobility of the population in the world. The growth of the population of many states capitals led to the use of high-rise buildings as a non-resident housing stock. However, there are a number of restrictions on the high-rise construction of non-resident housing stock in megacities. The authors formalize the problem of determining the optimal ratio of the volume of urban buildings belonging to the high-rise buildings types and intended for non-residents to a common housing fund. We conduct economic calculations to determine the quantitative indicators. It can be used as the basis for administrative measures aimed at limiting the people flow arriving with the intention of temporarily deploying in megacities.

One cutting plane algorithm using auxiliary functions

NASA Astrophysics Data System (ADS)

Zabotin, I. Ya; Kazaeva, K. E.

2016-11-01

We propose an algorithm for solving a convex programming problem from the class of cutting methods. The algorithm is characterized by the construction of approximations using some auxiliary functions, instead of the objective function. Each auxiliary function bases on the exterior penalty function. In proposed algorithm the admissible set and the epigraph of each auxiliary function are embedded into polyhedral sets. In connection with the above, the iteration points are found by solving linear programming problems. We discuss the implementation of the algorithm and prove its convergence.

Validation of the Alcohol Use Disorders Identification Test in university students: AUDIT and AUDIT-C.

PubMed

García Carretero, Miguel Ángel; Novalbos Ruiz, José Pedro; Martínez Delgado, José Manuel; O'Ferrall González, Cristina

2016-03-02

The aim of this study was to determine the psychometric properties of the Alcohol Use Disorders Identification Test (AUDIT and AUDIT-C) in order to detect problems related to the consumption of alcohol in the university population. The sample consisted of 1309 students.A Weekly Alcohol Consumption Diary was used as a gold standard; Cronbach's Alpha, the Kappa index, Spearman's correlation coefficient and exploratory factor analysis were applied for diagnostic reliability and validity, with ROC curves used to establish the different cut-off points. Binge Drinking (BD) episodes were found in 3.9% of men and 4.0% of women with otherwise low-risk drinking patterns. AUDIT identified 20.1% as high-risk drinkers and 6.4% as drinkers with physical-psychological problems and probable alcohol dependence.Cronbach's alpha of 0.75 demonstrates good internal consistency. The best cut-off points for high-risk drinking students were 8 for males and 6 for females. As for problem drinkers and probable ADS, 13 was the best cut-off point for both sexes. In relation to AUDIT-C, 5 and 4 were the best cut-off points for males and females with high-risk patterns, respectively. The criterion validity of AUDIT and AUDIT-C to detect binge drinking episodes was found to have a moderate K value. The results obtained show that AUDIT has good psychometric properties to detect early alcohol abuse disorders in university students; however, it is recommended that the cut-off point be reduced to 8 in men. AUDIT-C improves its predictive value by raising the cut-off point by one unit. Items 2 and 3 should be reviewed to increase its predictive value for BD.

An FMS Dynamic Production Scheduling Algorithm Considering Cutting Tool Failure and Cutting Tool Life

NASA Astrophysics Data System (ADS)

Setiawan, A.; Wangsaputra, R.; Martawirya, Y. Y.; Halim, A. H.

2016-02-01

This paper deals with Flexible Manufacturing System (FMS) production rescheduling due to unavailability of cutting tools caused either of cutting tool failure or life time limit. The FMS consists of parallel identical machines integrated with an automatic material handling system and it runs fully automatically. Each machine has a same cutting tool configuration that consists of different geometrical cutting tool types on each tool magazine. The job usually takes two stages. Each stage has sequential operations allocated to machines considering the cutting tool life. In the real situation, the cutting tool can fail before the cutting tool life is reached. The objective in this paper is to develop a dynamic scheduling algorithm when a cutting tool is broken during unmanned and a rescheduling needed. The algorithm consists of four steps. The first step is generating initial schedule, the second step is determination the cutting tool failure time, the third step is determination of system status at cutting tool failure time and the fourth step is the rescheduling for unfinished jobs. The approaches to solve the problem are complete-reactive scheduling and robust-proactive scheduling. The new schedules result differences starting time and completion time of each operations from the initial schedule.

Research on tool wearing on milling of TC21 titanium alloy

NASA Astrophysics Data System (ADS)

Guilin, Liu

2017-06-01

Titanium alloys are used in aircraft widely, but the efficiency is a problem for machining titanium alloy. In this paper, the cutting experiment of TC21 titanium alloy was studied. Cutting parameters and test methods for TC21 titanium alloy were designed. The wear behavior of TC21 titanium alloy was studied based on analysis of orthogonal test results. It provides a group of cutting parameters for TC21 titanium alloy processing.

Optimization of Machining Parameters of Milling Operation by Application of Semi-synthetic oil based Nano cutting Fluids

NASA Astrophysics Data System (ADS)

Giri Prasad, M. J.; Abhishek Raaj, A. S.; Rishi Kumar, R.; Gladson, Frank; M, Gautham

2016-09-01

The present study is concerned with resolving the problems pertaining to the conventional cutting fluids. Two samples of nano cutting fluids were prepared by dispersing 0.01 vol% of MWCNTs and a mixture of 0.01 vol% of MWCNTs and 0.01 vol% of nano ZnO in the soluble oil. The thermophysical properties such as the kinematic viscosity, density, flash point and the tribological properties of the prepared nano cutting fluid samples were experimentally investigated and were compared with those of plain soluble oil. In addition to this, a milling process was carried by varying the process parameters and by application of different samples of cutting fluids and an attempt was made to determine optimal cutting condition using the Taguchi optimization technique.

Round-off errors in cutting plane algorithms based on the revised simplex procedure

NASA Technical Reports Server (NTRS)

Moore, J. E.

1973-01-01

This report statistically analyzes computational round-off errors associated with the cutting plane approach to solving linear integer programming problems. Cutting plane methods require that the inverse of a sequence of matrices be computed. The problem basically reduces to one of minimizing round-off errors in the sequence of inverses. Two procedures for minimizing this problem are presented, and their influence on error accumulation is statistically analyzed. One procedure employs a very small tolerance factor to round computed values to zero. The other procedure is a numerical analysis technique for reinverting or improving the approximate inverse of a matrix. The results indicated that round-off accumulation can be effectively minimized by employing a tolerance factor which reflects the number of significant digits carried for each calculation and by applying the reinversion procedure once to each computed inverse. If 18 significant digits plus an exponent are carried for each variable during computations, then a tolerance value of 0.1 x 10 to the minus 12th power is reasonable.

The technical analysis of the stock exchange and physics: Japanese candlesticks for solar activity

NASA Astrophysics Data System (ADS)

Dineva, C.; Atanasov, V.

2013-09-01

In this article, we use the Japanese candlesticks, a method popular in the technical analysis of the Stock/Forex markets and apply it to a variable in physics-the solar activity. This method is invented and used exclusively for economic analysis and its application to a physical problem produced unexpected results. We found that the Japanese candlesticks are convenient tool in the analysis of the variables in the physics of the Sun. Based on our observations, we differentiated a new cycle in the solar activity.

TERRA: Building New Communities for Advanced Biofuels

ScienceCinema

Cornelius, Joe; Mockler, Todd; Tuinstra, Mitch

2018-01-16

ARPA-E’s Transportation Energy Resources from Renewable Agriculture (TERRA) program is bringing together top experts from different disciplines – agriculture, robotics and data analytics – to rethink the production of advanced biofuel crops. ARPA-E Program Director Dr. Joe Cornelius discusses the TERRA program and explains how ARPA-E’s model enables multidisciplinary collaboration among diverse communities. The video focuses on two TERRA projects—Donald Danforth Center and Purdue University—that are developing and integrating cutting-edge remote sensing platforms, complex data analytics tools and plant breeding technologies to tackle the challenge of sustainably increasing biofuel stocks.

Characterization of Flame Cut Heavy Steel: Modeling of Temperature History and Residual Stress Formation

NASA Astrophysics Data System (ADS)

Jokiaho, T.; Laitinen, A.; Santa-aho, S.; Isakov, M.; Peura, P.; Saarinen, T.; Lehtovaara, A.; Vippola, M.

2017-12-01

Heavy steel plates are used in demanding applications that require both high strength and hardness. An important step in the production of such components is cutting the plates with a cost-effective thermal cutting method such as flame cutting. Flame cutting is performed with a controlled flame and oxygen jet, which burns the steel and forms a cutting edge. However, the thermal cutting of heavy steel plates causes several problems. A heat-affected zone (HAZ) is generated at the cut edge due to the steep temperature gradient. Consequently, volume changes, hardness variations, and microstructural changes occur in the HAZ. In addition, residual stresses are formed at the cut edge during the process. In the worst case, unsuitable flame cutting practices generate cracks at the cut edge. The flame cutting of thick steel plate was modeled using the commercial finite element software ABAQUS. The results of modeling were verified by X-ray diffraction-based residual stress measurements and microstructural analysis. The model provides several outcomes, such as obtaining more information related to the formation of residual stresses and the temperature history during the flame cutting process. In addition, an extensive series of flame cut samples was designed with the assistance of the model.

Stock-outs of antiretroviral drugs and coping strategies used to prevent changes in treatment regimens in Kinondoni District, Tanzania: a cross-sectional study.

PubMed

Mori, Amani Thomas; Owenya, Joyce

2014-01-01

Since 2004, the government of Tanzania has been rolling out antiretroviral treatment programs all over the country. However, the capacity of the health system to cope with the rapid scale-up of these programs is a major concern, and problems may result in drug stock-outs that force changes in treatment regimens. This study aims to explore stock-outs of antiretroviral drugs and further determine the coping strategies employed to prevent changes in treatment regimens in HIV/AIDS care and treatment clinics in Kinondoni District, Dar es Salaam, Tanzania. A cross-sectional study was conducted in 20 HIV/AIDS care and treatment clinics. Interviews were conducted with the person in charge and a member of the pharmacy staff from each clinic using a pre-tested semi-structured interview guide. Verbal responses were transcribed, coded and analysed by thematic approach. Quantitative data were analysed using Excel spreadsheet (Microsoft Excel®, Microsoft Corporation). The total number of clients enrolled in the visited clinics was 32,147, of whom 20,831 (64.8%) had already been initiated onto antiretroviral therapies (ART). Stock-out of antiretroviral drugs was reported in 16 out of the 20 clinics, causing 210 patients to change their ART regimens, during the 12 months preceding the survey. Inefficient supply systems, quantification problems and short expiry duration were cited as the main causes of stock-outs. The coping strategies utilised to prevent changes in ART regimens were: shortening of the refill period, borrowing and moving patients to other clinics. Changes in ART regimens due to stock-outs of antiretroviral drugs occurred in a small but significant number of patients. This increases the risk of the emergence of drug-resistant HIV strains. Healthcare workers use various coping strategies to prevent changes in ART regimens but, unfortunately, some of these strategies are likely to increase patient-borne costs, which may discourage them from attending their routine clinics, hence leading to unplanned treatment interruptions.

A review on the modelling of collection and distribution of blood donation based on vehicle routing problem

NASA Astrophysics Data System (ADS)

Azezan, Nur Arif; Ramli, Mohammad Fadzli; Masran, Hafiz

2017-11-01

In this paper, we discussed a literature on blood collection-distribution that based on vehicle routing problem. This problem emergence when the process from collection to stock up must be completed in timely manner. We also modified the mathematical model so that it will suited to general collection of blood. A discussion on its algorithm and solution methods are also pointed out briefly in this paper.

Non-rigid image registration using graph-cuts.

PubMed

Tang, Tommy W H; Chung, Albert C S

2007-01-01

Non-rigid image registration is an ill-posed yet challenging problem due to its supernormal high degree of freedoms and inherent requirement of smoothness. Graph-cuts method is a powerful combinatorial optimization tool which has been successfully applied into image segmentation and stereo matching. Under some specific constraints, graph-cuts method yields either a global minimum or a local minimum in a strong sense. Thus, it is interesting to see the effects of using graph-cuts in non-rigid image registration. In this paper, we formulate non-rigid image registration as a discrete labeling problem. Each pixel in the source image is assigned a displacement label (which is a vector) indicating which position in the floating image it is spatially corresponding to. A smoothness constraint based on first derivative is used to penalize sharp changes in displacement labels across pixels. The whole system can be optimized by using the graph-cuts method via alpha-expansions. We compare 2D and 3D registration results of our method with two state-of-the-art approaches. It is found that our method is more robust to different challenging non-rigid registration cases with higher registration accuracy.

Development of a Numerical Model for Orthogonal Cutting. Discussion about the Sensitivity to Friction Problem

NASA Astrophysics Data System (ADS)

San Juan, M.; de la Iglesia, J. M.; Martín, O.; Santos, F. J.

2009-11-01

In despite of the important progresses achieved in the knowledge of cutting processes, the study of certain aspects has undergone the very limitations of the experimental means: temperature gradients, frictions, contact, etc… Therefore, the development of numerical models is a valid tool as a first approach to study of those problems. In the present work, a calculation model under Abaqus Explicit code is developed to represent the orthogonal cutting of AISI 4140 steel. A bidimensional simulation under plane strain conditions, which is considered as adiabatic due to the high speed of the material flow, is chosen. The chip separation is defined by means of a fracture law that allows complex simulations of tool penetration in the workpiece. The strong influence of friction on cutting is proved, therefore a very good definition of materials behaviour laws could be obtained, but an erroneous value of friction coefficient could notably reduce the reliability. Considering the difficulty of checking the friction models used in the simulation, from the tests carried out habitually, the most efficacious way to characterize the friction would be to combine simulation models with cutting tests.

Allometric Models for Predicting Aboveground Biomass and Carbon Stock of Tropical Perennial C 4 Grasses in Hawaii

DOE PAGES

Youkhana, Adel H.; Ogoshi, Richard M.; Kiniry, James R.; ...

2017-05-02

Biomass is a promising renewable energy option that provides a more environmentally sustainable alternative to fossil resources by reducing the net flux of greenhouse gasses to the atmosphere. Yet, allometric models that allow the prediction of aboveground biomass (AGB), biomass carbon (C) stock non-destructively have not yet been developed for tropical perennial C 4 grasses currently under consideration as potential bioenergy feedstock in Hawaii and other subtropical and tropical locations. The objectives of this study were to develop optimal allometric relationships and site-specific models to predict AGB, biomass C stock of napiergrass, energycane, and sugarcane under cultivation practices for renewablemore » energy and validate these site-specific models against independent data sets generated from sites with widely different environments. Several allometric models were developed for each species from data at a low elevation field on the island of Maui, Hawaii. A simple power model with stalk diameter (D) was best related to AGB and biomass C stock for napiergrass, energycane, and sugarcane, (R 2 = 0.98, 0.96, and 0.97, respectively). The models were then tested against data collected from independent fields across an environmental gradient. For all crops, the models over-predicted AGB in plants with lower stalk D, but AGB was under-predicted in plants with higher stalk D. The models using stalk D were better for biomass prediction compared to dewlap H (Height from the base cut to most recently exposed leaf dewlap) models, which showed weak validation performance. Although stalk D model performed better, however, the mean square error (MSE)-systematic was ranged from 23 to 43 % of MSE for all crops. A strong relationship between model coefficient and rainfall was existed, although these were irrigated systems; suggesting a simple site-specific coefficient modulator for rainfall to reduce systematic errors in water-limited areas. These allometric equations provide a tool for farmers in the tropics to estimate perennial C4 grass biomass and C stock during decision-making for land management and as an environmental sustainability indicator within a renewable energy system.« less

Accuracy of the WHO’s body mass index cut-off points to measure gender- and age-specific obesity in middle-aged adults living in the city of Rio de Janeiro, Brazil

PubMed Central

Wollner, Materko; Paulo Roberto, Benchimol-Barbosa; Alysson Roncally, Silva Carvalho; Jurandir, Nadal; Edil, Luis Santos

2017-01-01

Introduction. Obesity is defined by the World Health Organization (WHO) as a disease characterized by the excessive accumulation of body fat. Obesity is considered a public health problem, leading to serious social, psychological and physical problems. However, the appropriate cut-off point of body mass index (BMI) based on body fat percentage (BF%) for classifying an individual as obese in middle-aged adults living in Rio de Janeiro remains unclear. Materials and methods. This was a prospective cross-sectional study comprising of 856 adults (413 men and 443 women) living in Rio de Janeiro, Brazil ranging from 30-59 years of age. The data were collected over a two year period (2010-2011), and all participants were underwent anthropometric evaluation. The gold standard was the percentage of body fat estimated by bioelectrical impedance analysis. The optimal sensitivity and specificity were attained by adjusting BMI cut-off values to predict obesity based on the WHO criteria: BF% >25% in men and >35% in women, according to the receiver operating characteristic curve (ROC) analysis adjusted for age and for the whole group. Results. The BMI cut-offs for predicting BF% were 29.9 kg/m2 in men and 24.9 kg/m2 in women. Conclusions The BMI that corresponded to a BF% previously defining obesity was similar to that of other Western populations for men but not for women. Furthermore, gender and age specific cut-off values are recommended in this population. Significance for public health World Health Organization (WHO) defines obesity as a disease characterized by the excessive accumulation of body fat. Obesity is considered a public health problem, leading to serious social, psychological and physical problems. The WHO suggested cut-off point for obesity is a body mass index (BMI) of 30 kg/m2, which is associated with morbidity and mortality. An important issue in the debate over measuring obesity concerns the use of BMI to define obesity across different populations. However, it is not clear, what is an appropriate cut-off point of BMI based on body fat percentage (BF%) to classify an individual as obese within gender-age groups and to distinguish categories of BF% in middle-aged adults living in the city of Rio de Janeiro. PMID:29071256

Shock synthesized and static sintered boron nitride cutting tool

NASA Astrophysics Data System (ADS)

Araki, M.; Kuroyama, Y.

1986-05-01

Shock synthesis of wBN (wurtzite phase boron nitride) on an industrial scale was achieved by Nippon Oil & Fats and Showa Denko in 1971. It seemed that the resultant wBN powder might display excellent qualities as a cutting tool material when it was sintered under very high static pressure and temperature because of its polycrystalline nature. Attempts to produce a wBN cutting tool material were commenced by the Tokyo Institute of Technology and Nippon Oil & Fats in 1976 and commercially available wBN cutting tools were first sold in 1980. Meanwhile, a new type of explosion chamber designed to eliminate explosion sound and earth vibration problems, novel high pressure vessels and other peripheral apparatuses have been developed. Now, WURZIN (trademark for the wBN cutting tool) is used in many aspects of the steel cutting field because it is durable when cutting various steels from mild steels to superalloys under high speed, interrupt and precision cutting conditions.

Trading strategy based on dynamic mode decomposition: Tested in Chinese stock market

NASA Astrophysics Data System (ADS)

Cui, Ling-xiao; Long, Wen

2016-11-01

Dynamic mode decomposition (DMD) is an effective method to capture the intrinsic dynamical modes of complex system. In this work, we adopt DMD method to discover the evolutionary patterns in stock market and apply it to Chinese A-share stock market. We design two strategies based on DMD algorithm. The strategy which considers only timing problem can make reliable profits in a choppy market with no prominent trend while fails to beat the benchmark moving-average strategy in bull market. After considering the spatial information from spatial-temporal coherent structure of DMD modes, we improved the trading strategy remarkably. Then the DMD strategies profitability is quantitatively evaluated by performing SPA test to correct the data-snooping effect. The results further prove that DMD algorithm can model the market patterns well in sideways market.

Graph cuts for curvature based image denoising.

PubMed

Bae, Egil; Shi, Juan; Tai, Xue-Cheng

2011-05-01

Minimization of total variation (TV) is a well-known method for image denoising. Recently, the relationship between TV minimization problems and binary MRF models has been much explored. This has resulted in some very efficient combinatorial optimization algorithms for the TV minimization problem in the discrete setting via graph cuts. To overcome limitations, such as staircasing effects, of the relatively simple TV model, variational models based upon higher order derivatives have been proposed. The Euler's elastica model is one such higher order model of central importance, which minimizes the curvature of all level lines in the image. Traditional numerical methods for minimizing the energy in such higher order models are complicated and computationally complex. In this paper, we will present an efficient minimization algorithm based upon graph cuts for minimizing the energy in the Euler's elastica model, by simplifying the problem to that of solving a sequence of easy graph representable problems. This sequence has connections to the gradient flow of the energy function, and converges to a minimum point. The numerical experiments show that our new approach is more effective in maintaining smooth visual results while preserving sharp features better than TV models.

50 CFR 216.41 - Permits for scientific research and enhancement.

Code of Federal Regulations, 2010 CFR

2010-10-01

... ecology of the species or stock, or to identifying, evaluating, or resolving conservation problems for the... may authorize the release of any population of an endangered or threatened species outside the current...

50 CFR 216.41 - Permits for scientific research and enhancement.

Code of Federal Regulations, 2012 CFR

2012-10-01

... ecology of the species or stock, or to identifying, evaluating, or resolving conservation problems for the... may authorize the release of any population of an endangered or threatened species outside the current...

50 CFR 216.41 - Permits for scientific research and enhancement.

Code of Federal Regulations, 2011 CFR

2011-10-01

... ecology of the species or stock, or to identifying, evaluating, or resolving conservation problems for the... may authorize the release of any population of an endangered or threatened species outside the current...

50 CFR 216.41 - Permits for scientific research and enhancement.

Code of Federal Regulations, 2013 CFR

2013-10-01

... ecology of the species or stock, or to identifying, evaluating, or resolving conservation problems for the... may authorize the release of any population of an endangered or threatened species outside the current...

50 CFR 216.41 - Permits for scientific research and enhancement.

Code of Federal Regulations, 2014 CFR

2014-10-01

... ecology of the species or stock, or to identifying, evaluating, or resolving conservation problems for the... may authorize the release of any population of an endangered or threatened species outside the current...

What Happens when Media Positions Are Cut?

ERIC Educational Resources Information Center

Anderson, Mary Alice

2011-01-01

Cuts abound despite an infusion of technology, restructured media programs, and research connecting media specialists to improved student achievement. Verbal and written support about the value of a library or media specialist has not translated into monetary support at a time of universal funding problems. All grade levels and district sizes are…

Residential ventilation in the United Kingdom: An overview

DOE Office of Scientific and Technical Information (OSTI.GOV)

Woolliscroft, M.

1997-12-31

This paper describes the background to residential ventilation in the U.K. and its origin in the character of the housing stock, predominantly single-family dwellings and usually terraced or semi-detached but with an increasing proportion of detached houses. Houses in the U.K. have traditionally been leaky by international standards, except by comparison with houses in parts of the US. Current data and trends are presented. Inside temperatures have generally been low by international standards (again recent data are presented), which, combined with high absolute humidity, has led to a major problem of condensation and mold, with the latter affecting several millionmore » dwellings or 17% of the total stock. Thirty-five percent of dwellings are affected by condensation. Residential ventilation in recent years in the U.K. has been largely directed toward this problem. Earlier, when much of the existing stock was actually built, the use of coal fires and leaky dwellings overcame these problems but created other problems. A comparison is made of fuel costs and indoor air temperatures between the U.K. and a number of other countries, and the consequences for the choice of residential ventilation systems are considered. Recent changes in U.K. building regulations are described concerning both ventilation (e.g., extract ventilation from wet areas both active and passive) and insulation and airtightness, and some evidence from the English House Condition Survey (EHCS) and other research on the effects of these changes is presented. Increasing concern about other pollutants--notably nitrogen dioxide (NO{sub 2}), carbon dioxide (CO), and dust mites--is described together with the consequences for combustion appliances, for example. Future problems due to tighter, more highly insulated houses are considered. Some interesting new developments are also considered, such as through-the-wall combined supply and extract units with heat recovery.« less

A logic-based method for integer programming

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hooker, J.; Natraj, N.R.

1994-12-31

We propose a logic-based approach to integer programming that replaces traditional branch-and-cut techniques with logical analogs. Integer variables are regarded as atomic propositions. The constraints give rise to logical formulas that are analogous to separating cuts. No continuous relaxation is used. Rather, the cuts are selected so that they can be easily solved as a discrete relaxation. (In fact, defining a relaxation and generating cuts are best seen as the same problem.) We experiment with relaxations that have a k-tree structure and can be solved by nonserial dynamic programming. We also present logic-based analogs of facet-defining cuts, Chv{acute a}tal rank,more » etc. We conclude with some preliminary computational results.« less

An integrated portfolio optimisation procedure based on data envelopment analysis, artificial bee colony algorithm and genetic programming

NASA Astrophysics Data System (ADS)

Hsu, Chih-Ming

2014-12-01

Portfolio optimisation is an important issue in the field of investment/financial decision-making and has received considerable attention from both researchers and practitioners. However, besides portfolio optimisation, a complete investment procedure should also include the selection of profitable investment targets and determine the optimal timing for buying/selling the investment targets. In this study, an integrated procedure using data envelopment analysis (DEA), artificial bee colony (ABC) and genetic programming (GP) is proposed to resolve a portfolio optimisation problem. The proposed procedure is evaluated through a case study on investing in stocks in the semiconductor sub-section of the Taiwan stock market for 4 years. The potential average 6-month return on investment of 9.31% from 1 November 2007 to 31 October 2011 indicates that the proposed procedure can be considered a feasible and effective tool for making outstanding investment plans, and thus making profits in the Taiwan stock market. Moreover, it is a strategy that can help investors to make profits even when the overall stock market suffers a loss.

Food web dynamics affect Northeast Arctic cod recruitment.

PubMed

Hjermann, Dag Ø; Bogstad, Bjarte; Eikeset, Anne Maria; Ottersen, Geir; Gjøsaeter, Harald; Stenseth, Nils Chr

2007-03-07

Proper management of ecosystems requires an understanding of both the species interactions as well as the effect of climate variation. However, a common problem is that the available time-series are of different lengths. Here, we present a general approach for studying the dynamic structure of such interactions. Specifically, we analyse the recruitment of the world's largest cod stock, the Northeast Arctic cod. Studies based on data starting in the 1970-1980s indicate that this stock is affected by temperature through a variety of pathways. However, the value of such studies is somewhat limited by the fact that they are based on a quite specific ecological and climatic situation. Recently, this stock has consisted of fairly young fish and the spawning stock has consisted of relatively few age groups. In this study, we develop a model for the effect of capelin (the cod's main prey) and herring on cod recruitment since 1973. Based on this model, we analyse data on cod, herring and temperature going back to 1921 and find that food-web effects explain a significant part of the cod recruitment variation back to around 1950.

Stock and option portfolio using fuzzy logic approach

NASA Astrophysics Data System (ADS)

Sumarti, Novriana; Wahyudi, Nanang

2014-03-01

Fuzzy Logic in decision-making process has been widely implemented in various problems in industries. It is the theory of imprecision and uncertainty that was not based on probability theory. Fuzzy Logic adds values of degree between absolute true and absolute false. It starts with and builds on a set of human language rules supplied by the user. The fuzzy systems convert these rules to their mathematical equivalents. This could simplify the job of the system designer and the computer, and results in much more accurate representations of the way systems behave in the real world. In this paper we examine the decision making process of stock and option trading by the usage of MACD (Moving Average Convergence Divergence) technical analysis and Option Pricing with Fuzzy Logic approach. MACD technical analysis is for the prediction of the trends of underlying stock prices, such as bearish (going downward), bullish (going upward), and sideways. By using Fuzzy C-Means technique and Mamdani Fuzzy Inference System, we define the decision output where the value of MACD is high then decision is "Strong Sell", and the value of MACD is Low then the decision is "Strong Buy". We also implement the fuzzification of the Black-Scholes option-pricing formula. The stock and options methods are implemented on a portfolio of one stock and its options. Even though the values of input data, such as interest rates, stock price and its volatility, cannot be obtain accurately, these fuzzy methods can give a belief degree of the calculated the Black-Scholes formula so we can make the decision on option trading. The results show the good capability of the methods in the prediction of stock price trends. The performance of the simulated portfolio for a particular period of time also shows good return.

Walleye in Lake Erie and Lake St. Clair

USGS Publications Warehouse

Nepszy, S.J.; Davies, D.H.; Einhouse, D.; Hatch, R.W.; Isbell, G.; MacLennan, D.; Muth, K.M.

1991-01-01

The history and current status of walleye (Stizostedion vitreum vitreum) stocks in Lake Erie and Lake St. Clair are reviewed in relation to their exploitation by commercial and recreational fishermen, environmental factors, rehabilitation efforts, and community dynamics. Management initiatives and stock recovery under these processes are outlined. After the collapse of the fishery in 1957, the highly productive walleye stock of western Lake Erie remained depressed through the 1960s, while the eastern basin stock remained stable. Closure of the fishery for walleye from 1970-73 because of mercury contamination provided an opportunity for the development of an international interagency management plan. With quota management, the walleye stock in western Lake Erie responded well to limited exploitation, steadily increased, and expanded its range. As population expanded, growth began to decline and was more apparent in the young-of-the-year (YOY) in the 1970s, and in older walleye in the late 1970s and 1980s. At the turn of the century, commercial harvest of walleye in Lake St. Clair ranged from 12-127 tonnes annually. A relatively stable period from 1910-59 was followed by significantly increased harvests (100-150 t) in 1959-65. This increase was a result of increased commercial exploitation as well as an increased abundance of walleye. After the mercury contamination problem of 1970, angling effort and harvest was reduced but then gradually increased in Ontario waters from 37 t in 1973 to 62 t in 1988. The increased mean age of the stock during the early 1970s was due to a few strong year-classes (1970, 1972, and 1974) as well as a period of stable or reduced catch per unit effort. With the current mean age not reduced significantly, the stocks of walleye should continue to provide good yields.

Prevention of edema, flight microangiopathy and venous thrombosis in long flights with elastic stockings. A randomized trial: The LONFLIT 4 Concorde Edema-SSL Study.

PubMed

Belcaro, Gianni; Cesarone, Maria Rosaria; Shah, Sandeep S G; Nicolaides, Andrew N; Geroulakos, George; Ippolito, Edmondo; Winford, Michelle; Lennox, Andrew; Pellegrini, Luciano; Brandolini, Rossella; Myers, Kenneth A; Simeone, Emilio; Bavera, Peter; Dugall, Mark; Di Renzo, Andrea; Moia, Marco

2002-01-01

The LONFLIT1/2 studies have established that in high-risk subjects after long (> 10 hours) flights the incidence of deep venous thrombosis (DVT) is between 4% and 6%. The LONFLIT4 study has been planned to evaluate the control of edema and DVT in low-medium-risk subjects. The aim of this study was to evaluate edema and its control with specific flight stockings, in long-haul flights. In the first part of the study 400 subjects at low-medium risk for DVT were contacted; 28 were excluded for several nonmedical problems; 372 were randomized into 2 groups to evaluate prophylaxis with stockings in 7-8-hour flights; the control group had no prophylaxis. Below-knee, Scholl, Flight Socks, producing 14-17 mm Hg of pressure at the ankle, were used in the treatment group. The occurrence of DVT was evaluated with high-resolution ultrasound scanning (femoral, popliteal, and tibial veins). Edema was assessed with a composite score based on parametric and nonparametric measurements. Part II: In this part of the study 285 subjects at low-medium risk for DVT were included and randomized into 2 groups to evaluate edema prophylaxis in 11-12-hour flights; the controls had no prophylaxis while the prevention group had below-knee, Scholl, Flight Socks (comparable to part I). Part 1: DVT evaluation. Of the 184 included subjects in the stockings group and 188 in the control group, 358 (96.2%) completed the study. Dropouts were due to compliance or connection problems. Age/sex distributions were comparable in the groups. Stockings Group: of 179 subjects (mean age 49; SD 7; M:F = 101:78), none had DVT or superficial thromboses. of 179 subjects (mean age 48.4; SD 7.3; M:F = 98:81), 4 (2.2%) had a DVT. There were also 2 superficial thromboses. In total, 3.35% (6) subjects had a thrombotic event. The difference (p<0.002) is significant. Intention-to-treat analysis detects 15 failures in the control group (9 lost + 6 thromboses) out of 188 subjects (7.9%) versus 5 subjects (2.7%) in the stockings group (p <0.05). All thrombotic events were observed in passengers sitting in nonaisle seats. The tolerability of the stockings was very good and there were no complaints or side effects. Thrombotic events were asymptomatic. No difference was observed in the distribution of events between men and women. The 3 women who had a thrombotic event were taking low-dose, oral contraceptives. Edema evaluation: The level of edema at inclusion was comparable in the 2 groups. After the flight there was a score of 6.7 (3.1) in controls; in the stockings group the score was 2.9 times lower (p<0.05). The control of edema with stockings was clear considering both parametric (circumference, volume) and nonparametric (analogue scale lines) data. Part II: DVT evaluation. Of the 285 included subjects, 271 (95%) completed the study. Dropouts were due to low compliance or connection problems. Age/sex distributions were comparable in the groups. Stockings Group: of 142 subjects (mean age 48; SD 8; M:F = 89:53), none had DVT or superficial thromboses. of 143 subjects (mean age 47; SD 8; M:F = 87:56), 3 had a popliteal DVT and 3 a superficial thrombosis. In total, 4.2% (6) subjects had a thrombotic event. The difference (p<0.02) between groups is significant. Intention-to-treat analysis detects 14 failures in the control group (8 lost + 6 thromboses = 9.7%) versus 6 (all lost = 4.2% in the stockings group) (p<0.05). Four of 6 events (3 DVT + 1 SVT) were observed in non-aisle seats. The tolerability of the stockings was very good. No difference was observed in the distribution of events between men and women. Edema evaluation: The level of edema at inclusion was comparable in the 2 groups. After the flight there was a score of 8.08 (2.9) in controls while in the stockings group the score was 2.56 (1.5) (p < 0.005). In conclusion. Scholl Flight Socks are very effective in controlling edema. Also this type of compression is effective in significantly reducing the incidence of DVT and thrombotic events in low-medium-risk subjects, in long-haul flights. Considering these observations, Flight Socks are effective in controlling edema and in reducing the incidence of DVT in low-medium-risk subjects, in long-haul flights (7-11 hours).

Anti-embolism stockings: are they used effectively and correctly?

PubMed

Cock, Karen Anne

Anti-embolism stockings are widely advocated in the prevention of deep vein thrombosis. But do they do more harm than good? This article explores the effectiveness of this intervention and the possible link with heel pressure ulceration, an increasing problem which costs the NHS millions of pounds and causes suffering to patients. With the aid of an audit tool the author assesses nursing knowledge and reveals that, although there is a high level of understanding regarding post-application care, the appropriate initiation of the intervention and subsequent documentation of this intervention are severely lacking, leaving the health profession wide open to litigation.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Youkhana, Adel H.; Ogoshi, Richard M.; Kiniry, James R.

Biomass is a promising renewable energy option that provides a more environmentally sustainable alternative to fossil resources by reducing the net flux of greenhouse gasses to the atmosphere. Yet, allometric models that allow the prediction of aboveground biomass (AGB), biomass carbon (C) stock non-destructively have not yet been developed for tropical perennial C 4 grasses currently under consideration as potential bioenergy feedstock in Hawaii and other subtropical and tropical locations. The objectives of this study were to develop optimal allometric relationships and site-specific models to predict AGB, biomass C stock of napiergrass, energycane, and sugarcane under cultivation practices for renewablemore » energy and validate these site-specific models against independent data sets generated from sites with widely different environments. Several allometric models were developed for each species from data at a low elevation field on the island of Maui, Hawaii. A simple power model with stalk diameter (D) was best related to AGB and biomass C stock for napiergrass, energycane, and sugarcane, (R 2 = 0.98, 0.96, and 0.97, respectively). The models were then tested against data collected from independent fields across an environmental gradient. For all crops, the models over-predicted AGB in plants with lower stalk D, but AGB was under-predicted in plants with higher stalk D. The models using stalk D were better for biomass prediction compared to dewlap H (Height from the base cut to most recently exposed leaf dewlap) models, which showed weak validation performance. Although stalk D model performed better, however, the mean square error (MSE)-systematic was ranged from 23 to 43 % of MSE for all crops. A strong relationship between model coefficient and rainfall was existed, although these were irrigated systems; suggesting a simple site-specific coefficient modulator for rainfall to reduce systematic errors in water-limited areas. These allometric equations provide a tool for farmers in the tropics to estimate perennial C4 grass biomass and C stock during decision-making for land management and as an environmental sustainability indicator within a renewable energy system.« less

Communicating Spending Cuts: Lessons for Australian University Leaders

ERIC Educational Resources Information Center

Sharrock, Geoff

2014-01-01

In 2011 and 2012, two Australian university vice chancellors flagged spending cuts at their institutions to overcome financial problems. In both cases, union and staff opposition led to public protests, intense media scrutiny, delays and retreats. This article compares the two cases to see what lessons may be drawn for university leaders faced…

Transport on percolation clusters with power-law distributed bond strengths.

PubMed

Alava, Mikko; Moukarzel, Cristian F

2003-05-01

The simplest transport problem, namely finding the maximum flow of current, or maxflow, is investigated on critical percolation clusters in two and three dimensions, using a combination of extremal statistics arguments and exact numerical computations, for power-law distributed bond strengths of the type P(sigma) approximately sigma(-alpha). Assuming that only cutting bonds determine the flow, the maxflow critical exponent v is found to be v(alpha)=(d-1)nu+1/(1-alpha). This prediction is confirmed with excellent accuracy using large-scale numerical simulation in two and three dimensions. However, in the region of anomalous bond capacity distributions (0< or =alpha< or =1) we demonstrate that, due to cluster-structure fluctuations, it is not the cutting bonds but the blobs that set the transport properties of the backbone. This "blob dominance" avoids a crossover to a regime where structural details, the distribution of the number of red or cutting bonds, would set the scaling. The restored scaling exponents, however, still follow the simplistic red bond estimate. This is argued to be due to the existence of a hierarchy of so-called minimum cut configurations, for which cutting bonds form the lowest level, and whose transport properties scale all in the same way. We point out the relevance of our findings to other scalar transport problems (i.e., conductivity).

Effects of management tactics on meeting conservation objectives for Western North American groundfish fisheries.

PubMed

Melnychuk, Michael C; Banobi, Jeannette A; Hilborn, Ray

2013-01-01

There is considerable variability in the status of fish populations around the world and a poor understanding of how specific management characteristics affect populations. Overfishing is a major problem in many fisheries, but in some regions the recent tendency has been to exploit stocks at levels below their maximum sustainable yield. In Western North American groundfish fisheries, the status of individual stocks and management systems among regions are highly variable. In this paper, we show the current status of groundfish stocks from Alaska, British Columbia, and the U.S. West Coast, and quantify the influence on stock status of six management tactics often hypothesized to affect groundfish. These tactics are: the use of harvest control rules with estimated biological reference points; seasonal closures; marine reserves; bycatch constraints; individual quotas (i.e., 'catch shares'); and gear type. Despite the high commercial value of many groundfish and consequent incentives for maintaining stocks at their most productive levels, most stocks were managed extremely conservatively, with current exploitation rates at only 40% of management targets and biomass 33% above target biomass on average. Catches rarely exceeded TACs but on occasion were far below TACs (mean catch:TAC ratio of 57%); approximately $150 million of potential landed value was foregone annually by underutilizing TACs. The use of individual quotas, marine reserves, and harvest control rules with estimated limit reference points had little overall effect on stock status. More valuable fisheries were maintained closer to management targets and were less variable over time than stocks with lower catches or ex-vessel prices. Together these results suggest there is no single effective management measure for meeting conservation objectives; if scientifically established quotas are set and enforced, a variety of means can be used to ensure that exploitation rates and biomass levels are near to or more conservative than management targets.

Generation Mechanism of Work Hardened Surface Layer in Metal Cutting

NASA Astrophysics Data System (ADS)

Hikiji, Rikio; Kondo, Eiji; Kawagoishi, Norio; Arai, Minoru

Finish machining used to be carried out in grinding, but it is being replaced by cutting with very small undeformed chip thickness. In ultra precision process, the effects of the cutting conditions and the complicated factors on the machined surface integrity are the serious problems. In this research, work hardened surface layer was dealt with as an evaluation of the machined surface integrity and the effect of the mechanical factors on work hardening was investigated experimentally in orthogonal cutting. As a result, it was found that work hardened surface layer was affected not only by the shear angle varied under the cutting conditions and the thrust force of cutting resistance, but also by the thrust force acting point, the coefficient of the thrust force and the compressive stress equivalent to the bulk hardness. Furthermore, these mechanical factors acting on the depth of the work hardened surface layer were investigated with the calculation model.

High performance cutting of aircraft and turbine components

NASA Astrophysics Data System (ADS)

Krämer, A.; Lung, D.; Klocke, F.

2012-04-01

Titanium and nickel-based alloys belong to the group of difficult-to-cut materials. The machining of these high-temperature alloys is characterized by low productivity and low process stability as a result of their physical and mechanical properties. Major problems during the machining of these materials are low applicable cutting speeds due to excessive tool wear, long machining times, and thus high manufacturing costs, as well as the formation of ribbon and snarled chips. Under these conditions automation of the production process is limited. This paper deals with strategies to improve machinability of titanium and nickel-based alloys. Using the example of the nickel-based alloy Inconel 718 high performance cutting with advanced cutting materials, such as PCBN and cutting ceramics, is presented. Afterwards the influence of different cooling strategies, like high-pressure lubricoolant supply and cryogenic cooling, during machining of TiAl6V4 is shown.

Diagnostic performance and optimal cut-off scores of the Massachusetts youth screening instrument-second version in a sample of Swiss youths in welfare and juvenile justice institutions.

PubMed

Dölitzsch, Claudia; Leenarts, Laura E W; Schmeck, Klaus; Fegert, Jorg M; Grisso, Thomas; Schmid, Marc

2017-02-08

There is a growing consensus about the importance of mental health screening of youths in welfare and juvenile justice institutions. The Massachusetts Youth Screening Instrument-second version (MAYSI-2) was specifically designed, normed and validated to assist juvenile justice facilities in the United States of America (USA), in identifying youths with potential emotional or behavioral problems. However, it is not known if the USA norm-based cut-off scores can be used in Switzerland. Therefore, the primary purpose of the current study was to estimate the diagnostic performance and optimal cut-off scores of the MAYSI-2 in a sample of Swiss youths in welfare and juvenile justice institutions. As the sample was drawn from the French-, German- and Italian-speaking parts of Switzerland, the three languages were represented in the total sample of the current study and consequently we could estimate the diagnostic performance and the optimal cut-off scores of the MAYSI-2 for the language regions separately. The other main purpose of the current study was to identify potential gender differences in the diagnostic performance and optimal cut-off scores. Participants were 297 boys and 149 girls (mean age = 16.2, SD = 2.5) recruited from 64 youth welfare and juvenile justice institutions (drawn from the French-, German- and Italian-speaking parts of Switzerland). The MAYSI-2 was used to screen for mental health or behavioral problems that could require further evaluation. Psychiatric classification was based on the Schedule for Affective Disorders and Schizophrenia for School-Age Children, Present and Lifetime version (K-SADS-PL). The MAYSI-2 scores were submitted into Receiver-Operating Characteristic (ROC) analyses to estimate the diagnostic performance and optimal 'caution' cut-off scores of the MAYSI-2. The ROC analyses revealed that nearly all homotypic mappings of MAYSI-2 scales onto (cluster of) psychiatric disorders revealed above chance level accuracy. The optimal 'caution' cut-off scores derived from the ROC curve for predicting (cluster of) psychiatric disorders were, for several MAYSI-2 scales, comparable to the USA norm-based 'caution' cut-off scores. For some MAYSI-2 scales, however, higher optimal 'caution' cut-off scores were found. With adjusted optimal 'caution' cut-off scores, the MAYSI-2 screens potential emotional or behavioral problems well in a sample of Swiss youths in welfare and juvenile justice institutions. However, as for choosing the optimal 'caution' cut off score for the MAYSI-2, both language as well as gender seems to be of importance. The results of this study point to a compelling need to test the diagnostic performance and optimal 'caution' cut-off scores of the MAYSI-2 more elaborately in larger differentiated language samples in Europe.

Superpixel-based graph cuts for accurate stereo matching

NASA Astrophysics Data System (ADS)

Feng, Liting; Qin, Kaihuai

2017-06-01

Estimating the surface normal vector and disparity of a pixel simultaneously, also known as three-dimensional label method, has been widely used in recent continuous stereo matching problem to achieve sub-pixel accuracy. However, due to the infinite label space, it’s extremely hard to assign each pixel an appropriate label. In this paper, we present an accurate and efficient algorithm, integrating patchmatch with graph cuts, to approach this critical computational problem. Besides, to get robust and precise matching cost, we use a convolutional neural network to learn a similarity measure on small image patches. Compared with other MRF related methods, our method has several advantages: its sub-modular property ensures a sub-problem optimality which is easy to perform in parallel; graph cuts can simultaneously update multiple pixels, avoiding local minima caused by sequential optimizers like belief propagation; it uses segmentation results for better local expansion move; local propagation and randomization can easily generate the initial solution without using external methods. Middlebury experiments show that our method can get higher accuracy than other MRF-based algorithms.

Waiting time distributions in financial markets

NASA Astrophysics Data System (ADS)

Sabatelli, L.; Keating, S.; Dudley, J.; Richmond, P.

2002-05-01

We study waiting time distributions for data representing two completely different financial markets that have dramatically different characteristics. The first are data for the Irish market during the 19th century over the period 1850 to 1854. A total of 10 stocks out of a database of 60 are examined. The second database is for Japanese yen currency fluctuations during the latter part of the 20th century (1989-1992). The Irish stock activity was recorded on a daily basis and activity was characterised by waiting times that varied from one day to a few months. The Japanese yen data was recorded every minute over 24 hour periods and the waiting times varied from a minute to a an hour or so. For both data sets, the waiting time distributions exhibit power law tails. The results for Irish daily data can be easily interpreted using the model of a continuous time random walk first proposed by Montroll and applied recently to some financial data by Mainardi, Scalas and colleagues. Yen data show a quite different behaviour. For large waiting times, the Irish data exhibit a cut off; the Yen data exhibit two humps that could arise as result of major trading centres in the World.

Enhanced index tracking modelling in portfolio optimization

NASA Astrophysics Data System (ADS)

Lam, W. S.; Hj. Jaaman, Saiful Hafizah; Ismail, Hamizun bin

2013-09-01

Enhanced index tracking is a popular form of passive fund management in stock market. It is a dual-objective optimization problem, a trade-off between maximizing the mean return and minimizing the risk. Enhanced index tracking aims to generate excess return over the return achieved by the index without purchasing all of the stocks that make up the index by establishing an optimal portfolio. The objective of this study is to determine the optimal portfolio composition and performance by using weighted model in enhanced index tracking. Weighted model focuses on the trade-off between the excess return and the risk. The results of this study show that the optimal portfolio for the weighted model is able to outperform the Malaysia market index which is Kuala Lumpur Composite Index because of higher mean return and lower risk without purchasing all the stocks in the market index.

Inside information: Financial conflicts of interest for research subjects in early phase clinical trials.

PubMed

Helft, Paul R; Ratain, Mark J; Epstein, Richard A; Siegler, Mark

2004-05-05

In recent years, several research subjects have told us that they had bought or intended to buy stock in the companies sponsoring the clinical trials in which they were enrolled. This situation has led us to ask what, if any, are physician-investigators' scientific, ethical, and legal responsibilities concerning research subjects who choose to buy stock in the companies sponsoring the clinical trials in which they are participating. Although the scope of this problem is unknown and is likely to be small, this commentary examines the scientific, ethical, and legal concerns raised by such activities on the part of research subjects enrolled in early phase clinical trials. In addition, this commentary also outlines the basis for our opinion that research subjects involved in an early phase clinical trial should avoid the financial conflicts of interest created by trading stock in the company sponsoring the clinical trial.

Identifying the critical financial ratios for stocks evaluation: A fuzzy delphi approach

NASA Astrophysics Data System (ADS)

Mokhtar, Mazura; Shuib, Adibah; Mohamad, Daud

2014-12-01

Stocks evaluation has always been an interesting and challenging problem for both researchers and practitioners. Generally, the evaluation can be made based on a set of financial ratios. Nevertheless, there are a variety of financial ratios that can be considered and if all ratios in the set are placed into the evaluation process, data collection would be more difficult and time consuming. Thus, the objective of this paper is to identify the most important financial ratios upon which to focus in order to evaluate the stock's performance. For this purpose, a survey was carried out using an approach which is based on an expert judgement, namely the Fuzzy Delphi Method (FDM). The results of this study indicated that return on equity, return on assets, net profit margin, operating profit margin, earnings per share and debt to equity are the most important ratios.

The afterlife of Laurence Sterne (1713-1768): Body snatching, dissection and the role of Cambridge anatomist Charles Collignon.

PubMed

Dittmar, Jenna M; Mitchell, Piers D

2016-11-01

This paper aims to highlight the practice of body snatching from graves in the 1700s for the purpose of providing corpses for anatomical dissection, and for stocking anatomy museums. To do this, we examine the exhumation and dissection of the famous eighteenth-century novelist Laurence Sterne and explore the involvement of Charles Collignon, Professor of Anatomy at the University of Cambridge. We also show that osteological and cut-mark analysis of a skull purported to be that of Sterne, currently housed in the Duckworth Collection at Cambridge, provides the key to solving the mystery surrounding why Sterne was resurrected. © The Author(s) 2015.

Prevalence of swallowing and speech problems in daily life after chemoradiation for head and neck cancer based on cut-off scores of the patient-reported outcome measures SWAL-QOL and SHI.

PubMed

Rinkel, Rico N; Verdonck-de Leeuw, Irma M; Doornaert, Patricia; Buter, Jan; de Bree, Remco; Langendijk, Johannes A; Aaronson, Neil K; Leemans, C René

2016-07-01

The objective of this study is to assess swallowing and speech outcome after chemoradiation therapy for head and neck cancer, based on the patient-reported outcome measures Swallowing Quality of Life Questionnaire (SWAL-QOL) and Speech Handicap Index (SHI), both provided with cut-off scores. This is a cross-sectional study. Department of Otolaryngology/Head and Neck Surgery of a University Medical Center. Sixty patients, 6 months to 5 years after chemoradiation for head and neck squamous cell carcinoma. Swallowing Quality of Life Questionnaire (SWAL-QOL) and SHI, both validated in Dutch and provided with cut-off scores. Associations were tested between the outcome measures and independent variables (age, gender, tumor stage and site, and radiotherapy technique, time since treatment, comorbidity and food intake). Fifty-two patients returned the SWAL-QOL and 47 the SHI (response rate 87 and 78 %, respectively). Swallowing and speech problems were present in 79 and 55 %, respectively. Normal food intake was noticed in 45, 35 % had a soft diet and 20 % tube feeding. Patients with soft diet and tube feeding reported more swallowing problems compared to patients with normal oral intake. Tumor subsite was significantly associated with swallowing outcome (less problems in larynx/hypopharynx compared to oral/oropharynx). Radiation technique was significantly associated with psychosocial speech problems (less problems in patients treated with IMRT). Swallowing and (to a lesser extent) speech problems in daily life are frequently present after chemoradiation therapy for head and neck cancer. Future prospective studies will give more insight into the course of speech and swallowing problems after chemoradiation and into efficacy of new radiation techniques and swallowing and speech rehabilitation programs.

Forest carbon stocks and fluxes in physiographic zones of India.

PubMed

Sheikh, Mehraj A; Kumar, Munesh; Bussman, Rainer W; Todaria, Np

2011-12-25

Reducing carbon Emissions from Deforestation and Degradation (REDD+) is of central importance to combat climate change. Foremost among the challenges is quantifying nation's carbon emissions from deforestation and degradation, which requires information on forest carbon storage. Here we estimated carbon storage in India's forest biomass for the years 2003, 2005 and 2007 and the net flux caused by deforestation and degradation, between two assessment periods i.e., Assessment Period first (ASP I), 2003-2005 and Assessment Period second (ASP II), 2005-2007. The total estimated carbon stock in India's forest biomass varied from 3325 to 3161 Mt during the years 2003 to 2007 respectively. There was a net flux of 372 Mt of CO2 in ASP I and 288 Mt of CO2 in ASP II, with an annual emission of 186 and 114 Mt of CO2 respectively. The carbon stock in India's forest biomass decreased continuously from 2003 onwards, despite slight increase in forest cover. The rate of carbon loss from the forest biomass in ASP II has dropped by 38.27% compared to ASP I. With the Copenhagen Accord, India along with other BASIC countries China, Brazil and South Africa is voluntarily going to cut emissions. India will voluntary reduce the emission intensity of its GDP by 20-25% by 2020 in comparison to 2005 level, activities like REDD+ can provide a relatively cost-effective way of offsetting emissions, either by increasing the removals of greenhouse gases from the atmosphere by afforestation programmes, managing forests, or by reducing emissions through deforestation and degradation.

Forest carbon stocks and fluxes in physiographic zones of India

PubMed Central

2011-01-01

Background Reducing carbon Emissions from Deforestation and Degradation (REDD+) is of central importance to combat climate change. Foremost among the challenges is quantifying nation's carbon emissions from deforestation and degradation, which requires information on forest carbon storage. Here we estimated carbon storage in India's forest biomass for the years 2003, 2005 and 2007 and the net flux caused by deforestation and degradation, between two assessment periods i.e., Assessment Period first (ASP I), 2003-2005 and Assessment Period second (ASP II), 2005-2007. Results The total estimated carbon stock in India's forest biomass varied from 3325 to 3161 Mt during the years 2003 to 2007 respectively. There was a net flux of 372 Mt of CO2 in ASP I and 288 Mt of CO2 in ASP II, with an annual emission of 186 and 114 Mt of CO2 respectively. The carbon stock in India's forest biomass decreased continuously from 2003 onwards, despite slight increase in forest cover. The rate of carbon loss from the forest biomass in ASP II has dropped by 38.27% compared to ASP I. Conclusion With the Copenhagen Accord, India along with other BASIC countries China, Brazil and South Africa is voluntarily going to cut emissions. India will voluntary reduce the emission intensity of its GDP by 20-25% by 2020 in comparison to 2005 level, activities like REDD+ can provide a relatively cost-effective way of offsetting emissions, either by increasing the removals of greenhouse gases from the atmosphere by afforestation programmes, managing forests, or by reducing emissions through deforestation and degradation. PMID:22196920

Co-precipitation of tobramycin into biomimetically coated orthopedic fixation pins employing submicron-thin seed layers of hydroxyapatite.

PubMed

Sörensen, Jan H; Lilja, Mirjam; Åstrand, Maria; Sörensen, Torben C; Procter, Philip; Strømme, Maria; Steckel, Hartwig

2014-01-01

The migration, loosening and cut-out of implants and nosocomial infections are current problems associated with implant surgery. New innovative strategies to overcome these issues are emphasized in today's research. The current work presents a novel strategy involving co-precipitation of tobramycin with biomimetic hydroxyapatite (HA) formation to produce implant coatings that control local drug delivery to prevent early bacterial colonization of the implant. A submicron- thin HA layer served as seed layer for the co-precipitation process and allowed for incorporation of tobramycin in the coating from a stock solution of antibiotic concentrations as high as 20 mg/ml. Concentrations from 0.5 to 20 mg/ml tobramycin and process temperatures of 37 °C and 60 °C were tested to assess the optimal parameters for a thin tobramycin- delivering HA coating on discs and orthopedic fixation pins. The morphology and thickness of the coating and the drug-release profile were evaluated via scanning electron microscopy and high performance liquid chromatography. The coatings delivered pharmaceutically relevant amounts of tobramycin over a period of 12 days. To the best of our knowledge, this is the longest release period ever observed for a fast-loaded biomimetic implant coating. The presented approach could form the foundation for development of combination device/antibiotic delivery vehicles tailored to meet well-defined clinical needs while combating infections and ensuring fast implant in-growth.

A minimization method on the basis of embedding the feasible set and the epigraph

NASA Astrophysics Data System (ADS)

Zabotin, I. Ya; Shulgina, O. N.; Yarullin, R. S.

2016-11-01

We propose a conditional minimization method of the convex nonsmooth function which belongs to the class of cutting-plane methods. During constructing iteration points a feasible set and an epigraph of the objective function are approximated by the polyhedral sets. In this connection, auxiliary problems of constructing iteration points are linear programming problems. In optimization process there is some opportunity of updating sets which approximate the epigraph. These updates are performed by periodically dropping of cutting planes which form embedding sets. Convergence of the proposed method is proved, some realizations of the method are discussed.

Cutting planes for the multistage stochastic unit commitment problem

DOE PAGES

Jiang, Ruiwei; Guan, Yongpei; Watson, Jean -Paul

2016-04-20

As renewable energy penetration rates continue to increase in power systems worldwide, new challenges arise for system operators in both regulated and deregulated electricity markets to solve the security-constrained coal-fired unit commitment problem with intermittent generation (due to renewables) and uncertain load, in order to ensure system reliability and maintain cost effectiveness. In this paper, we study a security-constrained coal-fired stochastic unit commitment model, which we use to enhance the reliability unit commitment process for day-ahead power system operations. In our approach, we first develop a deterministic equivalent formulation for the problem, which leads to a large-scale mixed-integer linear program.more » Then, we verify that the turn on/off inequalities provide a convex hull representation of the minimum-up/down time polytope under the stochastic setting. Next, we develop several families of strong valid inequalities mainly through lifting schemes. In particular, by exploring sequence independent lifting and subadditive approximation lifting properties for the lifting schemes, we obtain strong valid inequalities for the ramping and general load balance polytopes. Lastly, branch-and-cut algorithms are developed to employ these valid inequalities as cutting planes to solve the problem. Our computational results verify the effectiveness of the proposed approach.« less

Cutting planes for the multistage stochastic unit commitment problem

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jiang, Ruiwei; Guan, Yongpei; Watson, Jean -Paul

As renewable energy penetration rates continue to increase in power systems worldwide, new challenges arise for system operators in both regulated and deregulated electricity markets to solve the security-constrained coal-fired unit commitment problem with intermittent generation (due to renewables) and uncertain load, in order to ensure system reliability and maintain cost effectiveness. In this paper, we study a security-constrained coal-fired stochastic unit commitment model, which we use to enhance the reliability unit commitment process for day-ahead power system operations. In our approach, we first develop a deterministic equivalent formulation for the problem, which leads to a large-scale mixed-integer linear program.more » Then, we verify that the turn on/off inequalities provide a convex hull representation of the minimum-up/down time polytope under the stochastic setting. Next, we develop several families of strong valid inequalities mainly through lifting schemes. In particular, by exploring sequence independent lifting and subadditive approximation lifting properties for the lifting schemes, we obtain strong valid inequalities for the ramping and general load balance polytopes. Lastly, branch-and-cut algorithms are developed to employ these valid inequalities as cutting planes to solve the problem. Our computational results verify the effectiveness of the proposed approach.« less

Influence of Surface Features for Increased Heat Dissipation on Tool Wear

PubMed Central

Beno, Tomas; Hoier, Philipp; Wretland, Anders

2018-01-01

The critical problems faced during the machining process of heat resistant superalloys, (HRSA), is the concentration of heat in the cutting zone and the difficulty in dissipating it. The concentrated heat in the cutting zone has a negative influence on the tool life and surface quality of the machined surface, which in turn, contributes to higher manufacturing costs. This paper investigates improved heat dissipation from the cutting zone on the tool wear through surface features on the cutting tools. Firstly, the objective was to increase the available surface area in high temperature regions of the cutting tool. Secondly, multiple surface features were fabricated for the purpose of acting as channels in the rake face to create better access for the coolant to the proximity of the cutting edge. The purpose was thereby to improve the cooling of the cutting edge itself, which exhibits the highest temperature during machining. These modified inserts were experimentally investigated in face turning of Alloy 718 with high-pressure coolant. Overall results exhibited that surface featured inserts decreased flank wear, abrasion of the flank face, cutting edge deterioration and crater wear probably due to better heat dissipation from the cutting zone. PMID:29693579

Modelling the effects of trade-offs between long and short-term objectives in fisheries management.

PubMed

Mardle, Simon; Pascoe, Sean

2002-05-01

Fisheries management is typically a complex problem, from both an environmental and political perspective. The main source of conflict occurs between the need for stock conservation and the need for fishing community well-being, which is typically measured by employment and income levels. For most fisheries, overexploitation of the stock requires a reduction in the level of fishing activity. While this may lead to long-term benefits (both conservation and economic), it also leads to a short-term reduction in employment and regional incomes. In regions which are heavily dependent on fisheries, short-term consequences of conservation efforts may be considerable. The relatively high degree of scientific uncertainty with respect to the status of the stocks and the relatively short lengths of political terms of office, generally give rise to the short-run view taking the highest priority when defining policy objectives. In this paper, a multi-objective model of the North Sea is developed that incorporates both long-term and short-term objectives. Optimal fleet sizes are estimated taking into consideration different preferences between the defined short-term and long-term objectives. The subsequent results from the model give the short-term and long-term equilibrium status of the fishery incorporating the effects of the short-term objectives. As would be expected, an optimal fleet from a short-term perspective is considerably larger than an optimal fleet from a long-run perspective. Conversely, stock sizes and sustainable yields are considerably lower in the long-term if a short-term perspective is used in setting management policies. The model results highlight what is essentially a principal-agent problem, with the objectives of the policy makers not necessarily reflecting the objectives of society as a whole.

Comparative performance of two mite-resistant stocks of honey bees (Hymenoptera: Apidae) in Alabama beekeeping operations.

PubMed

Ward, Kenneth; Danka, Robert; Ward, Rufina

2008-06-01

The utility of USDA-developed Russian and varroa sensitive hygiene (VSH) honey bees, Apis mellifera L. (Hymenoptera: Apidae), was compared with that of locally produced, commercial Italian bees during 2004-2006 in beekeeping operations in Alabama, USA. Infestations of varroa mites, Varroa destructor Anderson & Truman (Acari: Varroidae), were measured twice each year, and colonies that reached established economic treatment thresholds (one mite per 100 adult bees in late winter; 5-10 mites per 100 adult bees in late summer) were treated with acaricides. Infestations of tracheal mites, Acarapis woodi (Rennie) (Acari: Tarsonemidae), were measured autumn and compared with a treatment threshold of 20% mite prevalence. Honey production was measured in 2005 and 2006 for colonies that retained original test queens. Throughout the three seasons of measurement, resistant stocks required less treatment against parasitic mites than the Italian stock. The total percentages of colonies needing treatment against varroa mites were 12% of VSH, 24% of Russian, and 40% of Italian. The total percentages requiring treatment against tracheal mites were 1% of Russian, 8% of VSH and 12% of Italian. The average honey yield of Russian and VSH colonies was comparable with that of Italian colonies each year. Beekeepers did not report any significant behavioral problems with the resistant stocks. These stocks thus have good potential for use in nonmigratory beekeeping operations in the southeastern United States.

Human connectome module pattern detection using a new multi-graph MinMax cut model.

PubMed

De, Wang; Wang, Yang; Nie, Feiping; Yan, Jingwen; Cai, Weidong; Saykin, Andrew J; Shen, Li; Huang, Heng

2014-01-01

Many recent scientific efforts have been devoted to constructing the human connectome using Diffusion Tensor Imaging (DTI) data for understanding the large-scale brain networks that underlie higher-level cognition in human. However, suitable computational network analysis tools are still lacking in human connectome research. To address this problem, we propose a novel multi-graph min-max cut model to detect the consistent network modules from the brain connectivity networks of all studied subjects. A new multi-graph MinMax cut model is introduced to solve this challenging computational neuroscience problem and the efficient optimization algorithm is derived. In the identified connectome module patterns, each network module shows similar connectivity patterns in all subjects, which potentially associate to specific brain functions shared by all subjects. We validate our method by analyzing the weighted fiber connectivity networks. The promising empirical results demonstrate the effectiveness of our method.

Supervisory control based on minimal cuts and Petri net sub-controllers coordination

NASA Astrophysics Data System (ADS)

Rezig, Sadok; Achour, Zied; Rezg, Nidhal; Kammoun, Mohamed-Ali

2016-10-01

This paper addresses the synthesis of Petri net (PN) controller for the forbidden state transition problem with a new utilisation of the theory of regions. Moreover, as any method of control synthesis based on a reachability graph, the theory of regions suffers from the combinatorial explosion problem. The proposed work minimises the number of equations in the linear system of theory of regions and therefore one can reduce the computation time. In this paper, two different approaches are proposed to select minimal cuts in the reachability graph in order to synthesise a PN controller. Thanks to a switch from one cut to another, one can activate and deactivate the corresponding PNcontroller. An application is implemented in a flexible manufacturing system to illustrate the present method. Finally, comparison with previous works with experimental results in obtaining a maximally permissive controller is presented.

Well-posedness and Scattering for the Boltzmann Equations: Soft Potential with Cut-off

NASA Astrophysics Data System (ADS)

He, Lingbing; Jiang, Jin-Cheng

2017-07-01

We prove the global existence of the unique mild solution for the Cauchy problem of the cut-off Boltzmann equation for soft potential model γ =2-N with initial data small in L^N_{x,v} where N=2,3 is the dimension. The proof relies on the existing inhomogeneous Strichartz estimates for the kinetic equation by Ovcharov (SIAM J Math Anal 43(3):1282-1310, 2011) and convolution-like estimates for the gain term of the Boltzmann collision operator by Alonso et al. (Commun Math Phys 298:293-322, 2010). The global dynamics of the solution is also characterized by showing that the small global solution scatters with respect to the kinetic transport operator in L^N_{x,v}. Also the connection between function spaces and cut-off soft potential model -N<γ <2-N is characterized in the local well-posedness result for the Cauchy problem with large initial data.

A Cartesian cut cell method for rarefied flow simulations around moving obstacles

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dechristé, G., E-mail: Guillaume.Dechriste@math.u-bordeaux1.fr; CNRS, IMB, UMR 5251, F-33400 Talence; Mieussens, L., E-mail: Luc.Mieussens@math.u-bordeaux1.fr

2016-06-01

For accurate simulations of rarefied gas flows around moving obstacles, we propose a cut cell method on Cartesian grids: it allows exact conservation and accurate treatment of boundary conditions. Our approach is designed to treat Cartesian cells and various kinds of cut cells by the same algorithm, with no need to identify the specific shape of each cut cell. This makes the implementation quite simple, and allows a direct extension to 3D problems. Such simulations are also made possible by using an adaptive mesh refinement technique and a hybrid parallel implementation. This is illustrated by several test cases, including amore » 3D unsteady simulation of the Crookes radiometer.« less

Proficiency Standards and Cut-Scores for Language Proficiency Tests.

ERIC Educational Resources Information Center

Moy, Raymond H.

1984-01-01

Discusses the problems associated with "grading on a curve," the approach often used for standard setting on language proficiency tests. Proposes four main steps presented in the setting of a non-arbitrary cut-score. These steps not only establish a proficiency standard checked by external criteria, but also check to see that the test covers the…

Extending the time interval for applying herbicide in cut-stump treatments on American beech

Treesearch

Jeffrey D. Kochenderfer; James N. Kochenderfer; Gary W. Miller

2013-01-01

American Beech (Fagus grandifolia Ehrh.) root sprouts often form dense understories that interfere with tree reproduction throughout much of the eastern hardwood region. The cut-stump treatment, whereby herbicide is applied to the stump within a few hours after a larger beech is felled, has been shown to mitigate the interference problem by...

Their Budgets Slashed, Public Colleges Share the Pain with a Glut of Applicants

ERIC Educational Resources Information Center

Mangan, Katherine

2008-01-01

This article reports that as students flock to public two-year and four-year colleges amid an ailing economy, they find the colleges struggling with financial problems of their own. Midyear budget cuts are forcing many institutions to lay off faculty members, cut course sections, and freeze enrollment. Rising unemployment, slumping values of…

Vegetative Propagation and the Genetic Improvement of North American Hardwoods

Treesearch

R. E. Farmer

1973-01-01

Progress and problems in vegetative propagation of important North American hardwoods are reviewed with emphasis on rooting cuttings and the application of propagation techniques in breeding research. Some problems in rooting physiology are discussed.

Historical geoscientific collections - requirements on digital cataloging and problems

NASA Astrophysics Data System (ADS)

Ehling, A.

2011-12-01

The Federal Institute for Geosciences and Natural Resources maintains comprehensive geoscientific collections: the historical collections of Prussian Geological Survey in Berlin (19th and 20th century; about 2 mio specimen) and the geoscientific collections of the 20th century in Hannover (about 800.000 specimen). Nowadays, where financial support is strictly bound to efficiency and rentability on one side and the soaring (among young people - nearly exclusive) use of the web for the research, it is mandatory to provide the information about the available stock of specimen on the web. The digital cataloging has being carried out since 20 years: up to now about 40 % of the stock has been documented in 20 access-databases. The experiences of 20 years digital cataloging as well as the contact with professional users allow to formulate the requirements on a modern digital database with all accordingly problems. The main problems are different kinds of specimen: minerals, rocks, fossils, drill cores with diverging descriptions; obsolescent names of minerals, rocks and geographical sites; generations of various inventory numbers; inhomogeneous data (quantity and quality). Out of it result requirements to much, well educated manpower on the one side and an intelligent digital solution on the other side: it should have an internationally useable standard considering all the described local problems.

Wavelet evolutionary network for complex-constrained portfolio rebalancing

NASA Astrophysics Data System (ADS)

Suganya, N. C.; Vijayalakshmi Pai, G. A.

2012-07-01

Portfolio rebalancing problem deals with resetting the proportion of different assets in a portfolio with respect to changing market conditions. The constraints included in the portfolio rebalancing problem are basic, cardinality, bounding, class and proportional transaction cost. In this study, a new heuristic algorithm named wavelet evolutionary network (WEN) is proposed for the solution of complex-constrained portfolio rebalancing problem. Initially, the empirical covariance matrix, one of the key inputs to the problem, is estimated using the wavelet shrinkage denoising technique to obtain better optimal portfolios. Secondly, the complex cardinality constraint is eliminated using k-means cluster analysis. Finally, WEN strategy with logical procedures is employed to find the initial proportion of investment in portfolio of assets and also rebalance them after certain period. Experimental studies of WEN are undertaken on Bombay Stock Exchange, India (BSE200 index, period: July 2001-July 2006) and Tokyo Stock Exchange, Japan (Nikkei225 index, period: March 2002-March 2007) data sets. The result obtained using WEN is compared with the only existing counterpart named Hopfield evolutionary network (HEN) strategy and also verifies that WEN performs better than HEN. In addition, different performance metrics and data envelopment analysis are carried out to prove the robustness and efficiency of WEN over HEN strategy.

High density culture of white bass X striped bass fingerlings in raceways using power plant heated effluent

DOE Office of Scientific and Technical Information (OSTI.GOV)

Collins, C.M.; Burton, G.L.; Schweinforth, R.L.

1983-06-01

White bass (Morone chrysops) X striped bass (M. saxatilis) hybrids weighing 1691/lb were initially stocked in five 24 ft/sup 3/ floating screen cages for 20 days. Hybrids averaging one inch in total length and 361 fish/lb were released in four 614 ft/sup 3/ concrete raceways. Two stocking densities, 2.6 and 5.1 fish/ft/sup 3/, were evaluated in the 94-day study using a flow rate of 300 gpm/raceway. Water temperatures averaged 79/sup 0/F and water quality was adequate throughout the production period. Fish were hand fed to satiation daily. Columnaris and Aeromonas hydrophila caused the most serious disease problems. Gas supersaturation wasmore » suspect in high mortality levels during cage culture of hybrid bass fry. Cannibalism may have been responsible for unaccountable losses prior to raceway stocking and at harvest. The study yielded 5773 hybrids weighing 658 lb. The high density treatment showed greater weight gain, average weight, average length and percent survival as well as improved food conversion. Results suggest that higher stocking densities and periodic grading may increase production and suppress cannibalism. 10 references, 3 figures, 3 tables.« less

Parent training for young Norwegian children with ODD and CD problems: predictors and mediators of treatment outcome.

PubMed

Fossum, Sturla; Mørch, Willy-Tore; Handegård, Bjørn H; Drugli, May B; Larsson, Bo

2009-04-01

Participants were 121 children, aged 4-8 years referred for conduct problems, and their mothers. A parent training intervention was implemented in two outpatient clinics in Norway. Treatment responders were defined as children scoring below a cut-off on the Eyberg Child Behavior Inventory, a score below an optimal cut-off for children in day-care and school as reported by teachers, in addition to a 30% reduction or greater in observed negative parenting. Self-reported parenting practices were explored as potential mediators. The results of logistic regression analyses showed that high levels of maternal stress, clinical levels of ADHD, and being a girl predicted a poorer outcome in conduct problems at home, while pretreatment clinical levels of ADHD predicted a poorer outcome as perceived by the teachers. Harsh and inconsistent parental disciplining emerged as significant partial mediators of changes in conduct problems, highlighting the importance of altering parenting practices to modify young children's conduct problems.

Macro Learning on a Micro Scale. Link Biology and Chemistry.

ERIC Educational Resources Information Center

Falk, Peter M.

1990-01-01

Described are several laboratory investigations that may be used to introduce biochemistry. Topics covered include carbohydrates, lipids, proteins, and metabolism. Reactions, stock solution formulas, and procedures are listed. Emphasized are individualizing work, designing alternative investigations, solving problems, and drawing conclusions. (KR)

Clitoral keloids after female genital mutilation/cutting.

PubMed

Birge, Özer; Akbaş, Murat; Özbey, Ertuğrul Gazi; Adıyeke, Mehmet

2016-09-01

We aimed to describe the presentation of long-term complications of female genital mutilation/cutting and the surgical management of clitoral keloids secondary to female genital mutilation/cutting. Twenty-seven women who underwent surgery because of clitoral keloid between May 2014 and September 2015 in Sudan Nyala Turkish Hospital were evaluated in this retrospective descriptive case series study. The prevalence of type 1, type 2, and type 3 female genital mutilation/cutting were 3.7%, 22.2%, and 74.1%, respectively (type 1: 1/27, type 2: 6/27, and type 3: 20/27). All patients had long-term health problems (dysuria, chronic pelvic pain, vaginal discharge, and chronic pruritus) and sexual dysfunction. Keloids were removed by surgical excision. There were no postoperative complications in any patient. Although clitoral keloid lesions can be seen after any type of female genital mutilation/cutting, they usually develop after type 3 female genital mutilation/cutting. Most of these keloids were noticed after menarche. Keloids can be removed by surgical excision and this procedure can alleviate some long-term morbidities of female genital mutilation/cutting.

Clitoral keloids after female genital mutilation/cutting

PubMed Central

Birge, Özer; Akbaş, Murat; Özbey, Ertuğrul Gazi; Adıyeke, Mehmet

2016-01-01

We aimed to describe the presentation of long-term complications of female genital mutilation/cutting and the surgical management of clitoral keloids secondary to female genital mutilation/cutting. Twenty-seven women who underwent surgery because of clitoral keloid between May 2014 and September 2015 in Sudan Nyala Turkish Hospital were evaluated in this retrospective descriptive case series study. The prevalence of type 1, type 2, and type 3 female genital mutilation/cutting were 3.7%, 22.2%, and 74.1%, respectively (type 1: 1/27, type 2: 6/27, and type 3: 20/27). All patients had long-term health problems (dysuria, chronic pelvic pain, vaginal discharge, and chronic pruritus) and sexual dysfunction. Keloids were removed by surgical excision. There were no postoperative complications in any patient. Although clitoral keloid lesions can be seen after any type of female genital mutilation/cutting, they usually develop after type 3 female genital mutilation/cutting. Most of these keloids were noticed after menarche. Keloids can be removed by surgical excision and this procedure can alleviate some long-term morbidities of female genital mutilation/cutting. PMID:28913112

User's manual for a computer program for simulating intensively managed allowable cut.

Treesearch

Robert W. Sassaman; Ed Holt; Karl Bergsvik

1972-01-01

Detailed operating instructions are described for SIMAC, a computerized forest simulation model which calculates the allowable cut assuming volume regulation for forests with intensively managed stands. A sample problem illustrates the required inputs and expected output. SIMAC is written in FORTRAN IV and runs on a CDC 6400 computer with a SCOPE 3.3 operating system....

Reproduction following small group cuttings in virgin Douglas-fir.

Treesearch

Norman P. Worthington

1953-01-01

Quick and adequate regeneration of Douglas-fir forests as they are harvested is a major forest management problem in the Puget Sound region. Clear-cutting by staggered settings has not always resulted in adequate regeneration even where no part of the area is more than one-fourth mile from a seed source. Single tree selection, experimented with extensively, has many...

Workpiece Temperature Variations During Flat Peripheral Grinding

NASA Astrophysics Data System (ADS)

Smirnov, Vitalii A.; Repko, Aleksandr V.

2018-06-01

The paper presents the results of researches of temperature variations during flat peripheral grinding. It is shown that the temperature variations of the workpiece can reach 25...30% of the average values, which can lead to some thermal defects. A nonlinear two-dimensional thermophysical grinding model is suggested. It takes into account local changes in the cutting conditions: the fluctuation of the cut layer and the cutting force, the thermal impact of the cutting grains, and the presence of surface cavities in the intermittent wheel. For the numerical solution of the problem, the method of finite differences is adapted. Researches of the method stability and convergence are made, taking into account the specific nature of the problem. A high accuracy of the approximation of the boundary conditions and the nonlinear heat equation is provided. An experimental verification of the proposed thermophysical model was carried out with the use of installation for simultaneous measurement of the grinding force and temperature. It is shown that the discrepancy between the theoretical and experimental values of the grinding temperature does not exceed 5%. The proposed thermophysical model makes it possible to predict with high accuracy the temperature variations during grinding by the wheel periphery.

Novel tool wear monitoring method in milling difficult-to-machine materials using cutting chip formation

NASA Astrophysics Data System (ADS)

Zhang, P. P.; Guo, Y.; Wang, B.

2017-05-01

The main problems in milling difficult-to-machine materials are the high cutting temperature and rapid tool wear. However it is impossible to investigate tool wear in machining. Tool wear and cutting chip formation are two of the most important representations for machining efficiency and quality. The purpose of this paper is to develop the model of tool wear with cutting chip formation (width of chip and radian of chip) on difficult-to-machine materials. Thereby tool wear is monitored by cutting chip formation. A milling experiment on the machining centre with three sets cutting parameters was performed to obtain chip formation and tool wear. The experimental results show that tool wear increases gradually along with cutting process. In contrast, width of chip and radian of chip decrease. The model is developed by fitting the experimental data and formula transformations. The most of monitored errors of tool wear by the chip formation are less than 10%. The smallest error is 0.2%. Overall errors by the radian of chip are less than the ones by the width of chip. It is new way to monitor and detect tool wear by cutting chip formation in milling difficult-to-machine materials.

Health Hazard Evaluation Report HETA 83-107-1574, Dana Corporation, Fort Wayne, Indiana

DOE Office of Scientific and Technical Information (OSTI.GOV)

Parrish, R.G.; Wallingford, K.M.

1985-04-01

Environmental and breathing-zone samples of cutting fluids and oils were analyzed at Dana Corporation, Fort Wayne, Indiana in May, 1983. The survey was requested by a company representative to evaluate the cause of dermatitis among machine-tool operators. A cutting fluid used at the facility was thought to be the cause of the dermatitis. Medical questionnaires were administered to 95 workers. Company dispensary records were reviewed. N-nitrosodimethylamine and triethanolamine were detected in new and used cutting fluid samples. Nickel, chromium, and zinc were detected in a sample of used cutting oil residue. Chloromethyl-phenol was found in two cutting fluid mix samples.more » The authors conclude that a health hazard exists at the facility. The skin problems appear to be related to exposure to cutting fluids and solvents in general, rather than a specific agent. Recommendations include using protective clothing, using waterless hand cleaners instead of solvents, and avoiding contact with chlorothene.« less

Losing Track of Time: Is Hypoxia In Part To Blame For Baltic Cod Aging Problems?

NASA Astrophysics Data System (ADS)

Limburg, K. E.; Hussy, K.

2016-02-01

Cod, a primary fishery species in the Baltic Sea since prehistoric times, has recently experienced marked declines in size and condition. This is due to a combination of worsening water quality conditions from hypoxia intensification, reduction in prey availability even as cod densities have risen, and increased occurrence of parasites and disease. One of the net results of this has been a decrease in formation of clear annual growth rings in otoliths of Eastern Baltic Cod. Otoliths (ear-stones) are part of the hearing and balance system in fishes, and grow incrementally as a fish grows. In seasonal environments, growth bands are laid down, much like tree rings. But in Eastern Baltic cod it has become increasingly difficult to "read" otoliths and determine ages. This is a serious problem, because age is a key variable used in stock assessment for the management of exploited populations, including quota-setting. In 2014 the situation became so dire that the stock assessment was not approved for this stock. Solutions are clearly needed. We are developing new methods to assist in solving the "aging problem" using a combination of otolith microchemistry, optical imagery and direct increment counts, and dynamic models. Developing novel ratios of trace elements and isotopes that enhance seasonal signatures appears promising. We are also tracking the intensity of hypoxia with a proxy (Mn:Ca ratios) as described in Limburg et al. 2015 (J. Mar. Sys. 141: 167-178). This study explicitly links hypoxia with a metric (otolith Mn:Ca ratios) that also has a physiological basis; preliminary results suggest our approach to deal with aging fishes badly impacted by hypoxia is broadly applicable across marine to freshwater ecosystems.

On the microeconomic problems studied by portfolio theory

NASA Astrophysics Data System (ADS)

Nikonov, Oleg; Medvedeva, Marina

2012-09-01

In the paper we consider economically motivated problems, which are treated with the help of methods of portfolio theory that goes back to the papers by H. Markowitz [1] and J. Tobin [2]. We show that the portfolio theory initially developed for risky securities (stocks) could be applied to other objects. In the present paper we consider several situations where such an application is reasonable and seems to be fruitful. Namely, we consider the problems of constructing the efficient portfolio of banking services and the portfolio of counteragents of a firm.

Category 3: Sound Generation by Interacting with a Gust

NASA Technical Reports Server (NTRS)

Scott, James R.

2004-01-01

The cascade-gust interaction problem is solved employing a time-domain approach. The purpose of this problem is to test the ability of a CFD/CAA code to accurately predict the unsteady aerodynamic and aeroacoustic response of a single airfoil to a two-dimensional, periodic vortical gust.Nonlinear time dependent Euler equations are solved using higher order spatial differencing and time marching techniques. The solutions indicate the generation and propagation of expected mode orders for the given configuration and flow conditions. The blade passing frequency (BPF) is cut off for this cascade while higher harmonic, 2BPF and 3BPF, modes are cut on.

Application of laser spot cutting on spring contact probe for semiconductor package inspection

NASA Astrophysics Data System (ADS)

Lee, Dongkyoung; Cho, Jungdon; Kim, Chan Ho; Lee, Seung Hwan

2017-12-01

A packaged semiconductor has to be electrically tested to make sure they are free of any manufacturing defects. The test interface, typically employed between a Printed Circuit Board and the semiconductor devices, consists of densely populated Spring Contact Probe (SCP). A standard SCP typically consists of a plunger, a barrel, and an internal spring. Among these components, plungers are manufactured by a stamping process. After stamping, plunger connecting arms need to be cut into pieces. Currently, mechanical cutting has been used. However, it may damage to the body of plungers due to the mechanical force engaged at the cutting point. Therefore, laser spot cutting is considered to solve this problem. The plunger arm is in the shape of a rectangular beam, 50 μm (H) × 90 μm (W). The plunger material used for this research is gold coated beryllium copper. Laser parameters, such as power and elapsed time, have been selected to study laser spot cutting. Laser material interaction characteristics such as a crater size, material removal zone, ablation depth, ablation threshold, and full penetration are observed. Furthermore, a carefully chosen laser parameter (Etotal = 1000mJ) to test feasibility of laser spot cutting are applied. The result show that laser spot cutting can be applied to cut SCP.

An experimental study of cutting performances in machining of nimonic super alloy GH2312

NASA Astrophysics Data System (ADS)

Du, Jinfu; Wang, Xi; Xu, Min; Mao, Jin; Zhao, Xinglong

2018-05-01

Nimonic super alloy are extensively used in the aerospace industry because of its unique properties. As they are quite costly and difficult to machine, the machining tool is easy to get worn. To solve the problem, an experiment was carried out on a numerical control slitting automatic lathe to analysis the tool wearing conditions and parts' surface quality of nimonic super alloy GH2132 under different cutters. The selection of suitable cutter, reasonable cutting data and cutting speed is obtained and some conclusions are made. The excellent coating tool, compared with other hard alloy cutters, along with suitable cutting data will greatly improve the production efficiency and product quality, it can completely meet the process of nimonic super alloy GH2312.

Random matrix approach to the dynamics of stock inventory variations

NASA Astrophysics Data System (ADS)

Zhou, Wei-Xing; Mu, Guo-Hua; Kertész, János

2012-09-01

It is well accepted that investors can be classified into groups owing to distinct trading strategies, which forms the basic assumption of many agent-based models for financial markets when agents are not zero-intelligent. However, empirical tests of these assumptions are still very rare due to the lack of order flow data. Here we adopt the order flow data of Chinese stocks to tackle this problem by investigating the dynamics of inventory variations for individual and institutional investors that contain rich information about the trading behavior of investors and have a crucial influence on price fluctuations. We find that the distributions of cross-correlation coefficient Cij have power-law forms in the bulk that are followed by exponential tails, and there are more positive coefficients than negative ones. In addition, it is more likely that two individuals or two institutions have a stronger inventory variation correlation than one individual and one institution. We find that the largest and the second largest eigenvalues (λ1 and λ2) of the correlation matrix cannot be explained by random matrix theory and the projections of investors' inventory variations on the first eigenvector u(λ1) are linearly correlated with stock returns, where individual investors play a dominating role. The investors are classified into three categories based on the cross-correlation coefficients CV R between inventory variations and stock returns. A strong Granger causality is unveiled from stock returns to inventory variations, which means that a large proportion of individuals hold the reversing trading strategy and a small part of individuals hold the trending strategy. Our empirical findings have scientific significance in the understanding of investors' trading behavior and in the construction of agent-based models for emerging stock markets.

Health inputs and cumulative health deficits among the older Chinese.

PubMed

Gu, Danan; Sautter, Jessica; Huang, Cheng; Zeng, Yi

2011-03-01

Using a health economics framework, we examined how both individual level investments at different life stages and current community-level environmental factors affect individual health stock and flows at old ages. We used a nationwide dataset from the 2002 and 2005 waves of the Chinese Longitudinal Healthy Longevity Survey, which included more than 15,000 adults aged 65 and older from 22 provinces in mainland China. We measured health stock with a cumulative health deficit index, a measure developed in geriatrics and gerontology that reflects deficits, illnesses, and functional impairment in numerous domains of health. The cumulative health deficit index has not been used in health economics before, but is a significant contribution because it captures the health stock concept very well and overcomes the problems of inconsistency resulting from the use of different measures of health stock in research. Our results show that several proxy measures for individual health investments in both childhood (nutritional status and parental survival status) and adulthood (family financial condition and access to healthcare) yielded positive returns to health stock measured by the cumulative health deficit index. Investments in social connections and healthy behaviors (religious involvement, alcohol use, and exercise) also produced positive returns in health stock. Current community-level factors such as air quality and labor force participation rate were significantly associated with levels of health deficits in old age as well. Yet, most of these individual investment and community environment variables did not significantly affect short-term health flows (improvement or deterioration in health status over three years). Our findings have important implications for developing preventive health programs in the context of population aging by focusing on policy-relevant predictors and a comprehensive indicator of health status in later life. Copyright © 2011 Elsevier Ltd. All rights reserved.

Selection Input Output by Restriction Using DEA Models Based on a Fuzzy Delphi Approach and Expert Information

NASA Astrophysics Data System (ADS)

Arsad, Roslah; Nasir Abdullah, Mohammad; Alias, Suriana; Isa, Zaidi

2017-09-01

Stock evaluation has always been an interesting problem for investors. In this paper, a comparison regarding the efficiency stocks of listed companies in Bursa Malaysia were made through the application of estimation method of Data Envelopment Analysis (DEA). One of the interesting research subjects in DEA is the selection of appropriate input and output parameter. In this study, DEA was used to measure efficiency of stocks of listed companies in Bursa Malaysia in terms of the financial ratio to evaluate performance of stocks. Based on previous studies and Fuzzy Delphi Method (FDM), the most important financial ratio was selected. The results indicated that return on equity, return on assets, net profit margin, operating profit margin, earnings per share, price to earnings and debt to equity were the most important ratios. Using expert information, all the parameter were clarified as inputs and outputs. The main objectives were to identify most critical financial ratio, clarify them based on expert information and compute the relative efficiency scores of stocks as well as rank them in the construction industry and material completely. The methods of analysis using Alirezaee and Afsharian’s model were employed in this study, where the originality of Charnes, Cooper and Rhodes (CCR) with the assumption of Constant Return to Scale (CSR) still holds. This method of ranking relative efficiency of decision making units (DMUs) was value-added by the Balance Index. The interested data was made for year 2015 and the population of the research includes accepted companies in stock markets in the construction industry and material (63 companies). According to the ranking, the proposed model can rank completely for 63 companies using selected financial ratio.

Generation of segmental chips in metal cutting modeled with the PFEM

NASA Astrophysics Data System (ADS)

Rodriguez Prieto, J. M.; Carbonell, J. M.; Cante, J. C.; Oliver, J.; Jonsén, P.

2018-06-01

The Particle Finite Element Method, a lagrangian finite element method based on a continuous Delaunay re-triangulation of the domain, is used to study machining of Ti6Al4V. In this work the method is revised and applied to study the influence of the cutting speed on the cutting force and the chip formation process. A parametric methodology for the detection and treatment of the rigid tool contact is presented. The adaptive insertion and removal of particles are developed and employed in order to sidestep the difficulties associated with mesh distortion, shear localization as well as for resolving the fine-scale features of the solution. The performance of PFEM is studied with a set of different two-dimensional orthogonal cutting tests. It is shown that, despite its Lagrangian nature, the proposed combined finite element-particle method is well suited for large deformation metal cutting problems with continuous chip and serrated chip formation.

Generation of segmental chips in metal cutting modeled with the PFEM

NASA Astrophysics Data System (ADS)

Rodriguez Prieto, J. M.; Carbonell, J. M.; Cante, J. C.; Oliver, J.; Jonsén, P.

2017-09-01

The Particle Finite Element Method, a lagrangian finite element method based on a continuous Delaunay re-triangulation of the domain, is used to study machining of Ti6Al4V. In this work the method is revised and applied to study the influence of the cutting speed on the cutting force and the chip formation process. A parametric methodology for the detection and treatment of the rigid tool contact is presented. The adaptive insertion and removal of particles are developed and employed in order to sidestep the difficulties associated with mesh distortion, shear localization as well as for resolving the fine-scale features of the solution. The performance of PFEM is studied with a set of different two-dimensional orthogonal cutting tests. It is shown that, despite its Lagrangian nature, the proposed combined finite element-particle method is well suited for large deformation metal cutting problems with continuous chip and serrated chip formation.

Oxygen-assisted multipass cutting of carbon fiber reinforced plastics with ultra-short laser pulses

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kononenko, T. V.; Komlenok, M. S.; Konov, V. I.

Deep multipass cutting of bidirectional and unidirectional carbon fiber reinforced plastics (CFRP) with picosecond laser pulses was investigated in different static atmospheres as well as with the assistance of an oxygen or nitrogen gas flow. The ablation rate was determined as a function of the kerf depth and the resulting heat affected zone was measured. An assisting oxygen gas flow is found to significantly increase the cutting productivity, but only in deep kerfs where the diminished evaporative ablation due to the reduced laser fluence reaching the bottom of the kerf does not dominate the contribution of reactive etching anymore. Oxygen-supportedmore » cutting was shown to also solve the problem that occurs when cutting the CFRP parallel to the fiber orientation where a strong deformation and widening of the kerf, which temporarily slows down the process speed, is revealed to be typical for processing in standard air atmospheres.« less

An ill-posed problem for the Black-Scholes equation for a profitable forecast of prices of stock options on real market data

NASA Astrophysics Data System (ADS)

Klibanov, Michael V.; Kuzhuget, Andrey V.; Golubnichiy, Kirill V.

2016-01-01

A new empirical mathematical model for the Black-Scholes equation is proposed to forecast option prices. This model includes new interval for the price of the underlying stock, new initial and new boundary conditions. Conventional notions of maturity time and strike prices are not used. The Black-Scholes equation is solved as a parabolic equation with the reversed time, which is an ill-posed problem. Thus, a regularization method is used to solve it. To verify the validity of our model, real market data for 368 randomly selected liquid options are used. A new trading strategy is proposed. Our results indicates that our method is profitable on those options. Furthermore, it is shown that the performance of two simple extrapolation-based techniques is much worse. We conjecture that our method might lead to significant profits of those financial insitutions which trade large amounts of options. We caution, however, that further studies are necessary to verify this conjecture.

New thinking on how to link executive pay with performance.

PubMed

Rappaport, A

1999-01-01

As the stock market began its ascent in the mid-1990s, executive pay--always the subject of heated debate--mounted along with it. That's because among the largest U.S. companies, stock options now account for more than half of total CEO compensation and about 30% of senior operating managers' pay. One problem became particularly clear during the bull market's astonishing run: even below-average performers reap huge gains from stock options when the market is rising rapidly. The author proposes steps to close the gap between existing compensation practices and those needed to promote higher levels of achievement at all levels of the corporation. For top managers, he recommends replacing conventional stock options with options that are tied to a market or peer index. Below-average performers would not be rewarded under such plans; superior performers could, depending on the way plans were structured, receive even more. He notes that managers at the business unit level should not be judged on the company's stock price--over which they have little control--and advocates an approach that accurately measures the value added by each unit. Finally, he suggests how certain indicators of value can be used to measure the contribution of frontline managers and employees. The concept of pay for performance has gained wide acceptance, but the link between incentive pay and superior performance is still too weak. Reforms must be adopted at all levels of the organization. Shareholders will applaud changes in pay schemes that motivate companies to deliver more value.

Ureteroscopic holmium laser cutting for inadvertently sutured drainage tube (report of five cases).

PubMed

Gao, Xu; Lu, Xin; Ren, Shancheng; Xu, Chuanliang; Sun, Yinghao

2008-07-01

The aim of this paper is to report a simple solution for inadvertently sutured drainage tube after urological surgery and discuss the different managements according to different types of this embarrassing complication. From September 2001 to January 2007, five inadvertently sutured drainage tubes were treated with ureteroscopic holmium laser cutting for the suture. All drainage tubes were removed after the operation without other complications. Holmium laser cutting via ureteroscope is a simple solution for the embarrassing problem of inadvertently sutured drainage tube. It can save the patient from undergoing another open surgery.

The Strength of One-Piece Solid, Build-Up and Laminated Wood Airplane Wing Beams

NASA Technical Reports Server (NTRS)

Nelson, John H

1920-01-01

The purpose of this report is to summarize the results of all wood airplane wing beams tested to date in the Bureau of Standards Laboratory in order that the various kinds of wood and methods of construction may be compared. All beams tested were of an I section and the majority were somewhat similar in size and cross section to the front wing beam of the Curtiss JN-4 machine. Construction methods may be classed as (1) solid beams cut from solid stock; (2) three-piece beams, built up of three pieces, web and flanges glued together by a tongue-and-groove joint and (3) laminated beams built up of thin laminations of wood glued together.

Portfolio optimization in enhanced index tracking with goal programming approach

NASA Astrophysics Data System (ADS)

Siew, Lam Weng; Jaaman, Saiful Hafizah Hj.; Ismail, Hamizun bin

2014-09-01

Enhanced index tracking is a popular form of passive fund management in stock market. Enhanced index tracking aims to generate excess return over the return achieved by the market index without purchasing all of the stocks that make up the index. This can be done by establishing an optimal portfolio to maximize the mean return and minimize the risk. The objective of this paper is to determine the portfolio composition and performance using goal programming approach in enhanced index tracking and comparing it to the market index. Goal programming is a branch of multi-objective optimization which can handle decision problems that involve two different goals in enhanced index tracking, a trade-off between maximizing the mean return and minimizing the risk. The results of this study show that the optimal portfolio with goal programming approach is able to outperform the Malaysia market index which is FTSE Bursa Malaysia Kuala Lumpur Composite Index because of higher mean return and lower risk without purchasing all the stocks in the market index.

A quantification of the standing stock of macro-debris in Majuro lagoon and its effect on hard coral communities.

PubMed

Richards, Zoe T; Beger, Maria

2011-08-01

The accumulation of debris is an insidious problem throughout the world's oceans. Here we document 234.24 items of macro-debris/km2 in the shallow populated parts of Majuro lagoon (Republic of the Marshall Islands) which is the second highest standing stock of macro-debris recorded to date in any benthic marine habitat in the world. The majority of macro-debris was from household sources (78.7%) with the peak abundance recorded in areas of medium affluence. Marine debris causes suffocation, shading, tissue abrasion and mortality of corals and we show a significant negative correlation exists between the level of hard coral cover and coverage of marine debris. Given long decomposition times, even if the input of rubbish to Majuro lagoon is stopped immediately, the standing stock of debris will persist for centuries. Multiple new initiatives are needed to curtail the direct and indirect dumping of waste in Majuro lagoon. Crown Copyright © 2011. Published by Elsevier Ltd. All rights reserved.

A credit policy approach in a two-warehouse inventory model for deteriorating items with price- and stock-dependent demand under partial backlogging

NASA Astrophysics Data System (ADS)

Panda, Gobinda Chandra; Khan, Md. Al-Amin; Shaikh, Ali Akbar

2018-04-01

Advertisement of the product is an important factor in inventory analysis. Also, price and stock have an important role to attract more customers in the competitive business situations. Trade credit policy is another important role in inventory analysis. We have combined these three factors together in a two-warehouse inventory model and represented it mathematically. In addition, we have added deteriorating factor of our proposed problem with price- and stock-dependent demand under partial backlogged shortage and solved. The frequency of advertisement is considered constant for a year in this paper. The proposed model is highly nonlinear in nature. Due to highly nonlinearity, we could not find the closed form solution. In this paper, trade credit facility is taken in the perspective of retailer, and all the possible cases and subcases of the model are discussed and solved using lingo 10.0 software. The results of sensitivity analysis prove the effectiveness of the proposed model.

The dynamics of stock exchange based on the formalism of weak continuous quantum measurement

NASA Astrophysics Data System (ADS)

Melnyk, S.; Tuluzov, I.

2010-07-01

The problem of measurement in economic models and the possibility of their quantum-mechanical description are considered. It is revealed that the apparent paradox of such a description is associated with a priori requirement of conformity of the model to all the alternatives of free choice of the observer. The measurement of the state of a trader on a stock exchange is formally defined as his responses to the proposals of sale at a fixed price. It is shown that an analogue of Bell's inequalities for this measurement model is violated at the most general assumptions related to the strategy of the trader and requires a quantum-mechanical description of the dynamics of his condition. In the framework of the theory of weak continuous quantum measurements, the equation of stock price dynamics and the quantum-mechanical generalization of the F. Black and M. Scholes model for pricing options are obtained. The fundamental distinctions between the obtained model and the classical one are discussed.

Grazing management effects on sediment, phosphorus, and pathogen loading of streams in cool-season grass pastures.

PubMed

Schwarte, Kirk A; Russell, James R; Kovar, John L; Morrical, Daniel G; Ensley, Steven M; Yoon, Kyoung-Jin; Cornick, Nancy A; Cho, Yong Il

2011-01-01

Erosion and runoff from pastures may lead to degradation of surface water. A 2-yr grazing study was conducted to quantify the effects of grazing management on sediment, phosphorus (P), and pathogen loading of streams in cool-season grass pastures. Six adjoining 12.1-ha pastures bisected by a stream in central Iowa were divided into three treatments: continuous stocking with unrestricted stream access (CSU), continuous stocking with restricted stream access (CSR), and rotational stocking (RS). Rainfall simulations on stream banks resulted in greater ( < 0.10) proportions of applied precipitation and amounts of sediment and P transported in runoff from bare sites than from vegetated sites across grazing treatments. Similar differences were observed comparing vegetated sites in CSU and RS pastures with vegetated sites in CSR pastures. Bovine enterovirus was shed by an average of 24.3% of cows during the study period and was collected in the runoff of 8.3 and 16.7% of runoff simulations on bare sites in CSU pastures in June and October of 2008, respectively, and from 8.3% of runoff simulations on vegetated sites in CSU pastures in April 2009. Fecal pathogens (bovine coronavirus [BCV], bovine rotavirus group A, and O157:H7) shed or detected in runoff were almost nonexistent; only BCV was detected in feces of one cow in August of 2008. Erosion of cut-banks was the greatest contributor of sediment and P loading to the stream; contributions from surface runoff and grazing animals were considerably less and were minimized by grazing management practices that reduced congregation of cattle by pasture streams. Copyright © by the American Society of Agronomy, Crop Science Society of America, and Soil Science Society of America, Inc.

Parasites as biological tags of fish stocks: a meta-analysis of their discriminatory power.

PubMed

Poulin, Robert; Kamiya, Tsukushi

2015-01-01

The use of parasites as biological tags to discriminate among marine fish stocks has become a widely accepted method in fisheries management. Here, we first link this approach to its unstated ecological foundation, the decay in the similarity of the species composition of assemblages as a function of increasing distance between them, a phenomenon almost universal in nature. We explain how distance decay of similarity can influence the use of parasites as biological tags. Then, we perform a meta-analysis of 61 uses of parasites as tags of marine fish populations in multivariate discriminant analyses, obtained from 29 articles. Our main finding is that across all studies, the observed overall probability of correct classification of fish based on parasite data was about 71%. This corresponds to a two-fold improvement over the rate of correct classification expected by chance alone, and the average effect size (Zr = 0·463) computed from the original values was also indicative of a medium-to-large effect. However, none of the moderator variables included in the meta-analysis had a significant effect on the proportion of correct classification; these moderators included the total number of fish sampled, the number of parasite species used in the discriminant analysis, the number of localities from which fish were sampled, the minimum and maximum distance between any pair of sampling localities, etc. Therefore, there are no clear-cut situations in which the use of parasites as tags is more useful than others. Finally, we provide recommendations for the future usage of parasites as tags for stock discrimination, to ensure that future applications of the method achieve statistical rigour and a high discriminatory power.

Geometry for Pie Lovers.

ERIC Educational Resources Information Center

Fisher, William

1982-01-01

An approach to the instruction of maxima and minima problems that works with tools of geometry and algebra is presented. The focus is on a classic pie-cutting problem, which is viewed as an interesting and instructive task that is an excellent application of transformation geometry. (MP)

Effect of simulated ice storm damage on loblolly pine tree and stand growth

Treesearch

Rodney E. Will; Thomas Hennessey; Thomas Lynch; Robert Heinemann; Randal Holeman; Dennis Wilson

2012-01-01

Ice damage to loblolly pine plantations is a recurrent problem in eastern Oklahoma and western Arkansas with significant ice events occurring recently in 1995, twice in 2000, and in 2007. Following ice damage, forest owners need to decide to clear-cut and replant, thin or partial cut to rehabilitate, or take no action. A quantitative assessment of tree and stand growth...

A practical method to assess model sensitivity and parameter uncertainty in C cycle models

NASA Astrophysics Data System (ADS)

Delahaies, Sylvain; Roulstone, Ian; Nichols, Nancy

2015-04-01

The carbon cycle combines multiple spatial and temporal scales, from minutes to hours for the chemical processes occurring in plant cells to several hundred of years for the exchange between the atmosphere and the deep ocean and finally to millennia for the formation of fossil fuels. Together with our knowledge of the transformation processes involved in the carbon cycle, many Earth Observation systems are now available to help improving models and predictions using inverse modelling techniques. A generic inverse problem consists in finding a n-dimensional state vector x such that h(x) = y, for a given N-dimensional observation vector y, including random noise, and a given model h. The problem is well posed if the three following conditions hold: 1) there exists a solution, 2) the solution is unique and 3) the solution depends continuously on the input data. If at least one of these conditions is violated the problem is said ill-posed. The inverse problem is often ill-posed, a regularization method is required to replace the original problem with a well posed problem and then a solution strategy amounts to 1) constructing a solution x, 2) assessing the validity of the solution, 3) characterizing its uncertainty. The data assimilation linked ecosystem carbon (DALEC) model is a simple box model simulating the carbon budget allocation for terrestrial ecosystems. Intercomparison experiments have demonstrated the relative merit of various inverse modelling strategies (MCMC, ENKF) to estimate model parameters and initial carbon stocks for DALEC using eddy covariance measurements of net ecosystem exchange of CO2 and leaf area index observations. Most results agreed on the fact that parameters and initial stocks directly related to fast processes were best estimated with narrow confidence intervals, whereas those related to slow processes were poorly estimated with very large uncertainties. While other studies have tried to overcome this difficulty by adding complementary data streams or by considering longer observation windows no systematic analysis has been carried out so far to explain the large differences among results. We consider adjoint based methods to investigate inverse problems using DALEC and various data streams. Using resolution matrices we study the nature of the inverse problems (solution existence, uniqueness and stability) and show how standard regularization techniques affect resolution and stability properties. Instead of using standard prior information as a penalty term in the cost function to regularize the problems we constraint the parameter space using ecological balance conditions and inequality constraints. The efficiency and rapidity of this approach allows us to compute ensembles of solutions to the inverse problems from which we can establish the robustness of the variational method and obtain non Gaussian posterior distributions for the model parameters and initial carbon stocks.

Fuzzy Random λ-Mean SAD Portfolio Selection Problem: An Ant Colony Optimization Approach

NASA Astrophysics Data System (ADS)

Thakur, Gour Sundar Mitra; Bhattacharyya, Rupak; Mitra, Swapan Kumar

2010-10-01

To reach the investment goal, one has to select a combination of securities among different portfolios containing large number of securities. Only the past records of each security do not guarantee the future return. As there are many uncertain factors which directly or indirectly influence the stock market and there are also some newer stock markets which do not have enough historical data, experts' expectation and experience must be combined with the past records to generate an effective portfolio selection model. In this paper the return of security is assumed to be Fuzzy Random Variable Set (FRVS), where returns are set of random numbers which are in turn fuzzy numbers. A new λ-Mean Semi Absolute Deviation (λ-MSAD) portfolio selection model is developed. The subjective opinions of the investors to the rate of returns of each security are taken into consideration by introducing a pessimistic-optimistic parameter vector λ. λ-Mean Semi Absolute Deviation (λ-MSAD) model is preferred as it follows absolute deviation of the rate of returns of a portfolio instead of the variance as the measure of the risk. As this model can be reduced to Linear Programming Problem (LPP) it can be solved much faster than quadratic programming problems. Ant Colony Optimization (ACO) is used for solving the portfolio selection problem. ACO is a paradigm for designing meta-heuristic algorithms for combinatorial optimization problem. Data from BSE is used for illustration.

A public health perspective to environmental barriers and accessibility problems for senior citizens living in ordinary housing.

PubMed

Granbom, Marianne; Iwarsson, Susanne; Kylberg, Marianne; Pettersson, Cecilia; Slaug, Björn

2016-08-11

Housing environments that hinder performance of daily activities and impede participation in social life have negative health consequences particularly for the older segment of the population. From a public health perspective accessible housing that supports active and healthy ageing is therefore crucial. The objective of the present study was to make an inventory of environmental barriers and investigate accessibility problems in the ordinary housing stock in Sweden as related to the functional capacity of senior citizens. Particular attention was paid to differences between housing types and building periods and to identify environmental barriers generating the most accessibility problems for sub-groups of senior citizens. Data on environmental barriers in dwellings from three databases on housing and health in old age was analysed (N = 1021). Four functional profiles representing large groups of senior citizens were used in analyses of the magnitude and severity of potential accessibility problems. Differences in terms of type of housing and building period were examined. High proportions of one-family houses as well as multi-dwellings had substantial numbers of environmental barriers, with significantly lower numbers in later building periods. Accessibility problems occurred already for senior citizens with few functional limitations, but more profound for those dependent on mobility devices. The most problematic housing sections were entrances in one-family houses and kitchens of multi-dwellings. Despite a high housing standard in the Swedish ordinary housing stock the results show substantial accessibility problems for senior citizens with functional limitations. To make housing accessible large-scale and systematic efforts are required.

Microwave drying remediation of petroleum-contaminated drill cuttings.

PubMed

Júnior, Irineu Petri; Martins, André Leibsohn; Ataíde, Carlos H; Duarte, Cláudio R

2017-07-01

The oil reservoir drilling phase generates contaminated cuttings with oil formation itself. These cuttings must be subjected to a decontamination process before being disposed of in the environment. Several technologies are cited in literature for the remediation of soil contaminated with oil or diesel, but none have been reported to remedy drill cuttings contaminated with oil from reservoir. The reservoir drill cuttings are a problem because its discharge is not allowed. The drying technology using microwave has shown promise in the decontamination of cuttings with non-aqueous base drilling fluid, conciliating good robustness and high removal efficiency. Considering the aspects mentioned previously, the application of heating and drying technology using microwave in the remediation of oil contaminated cuttings from well drill was studied. The influence of temperature, specific energy and initial content of water in the drying operation of the reservoir cuttings and of the drilling cuttings artificially contaminated with oil were analyzed. The results showed an influence of temperature in the drying of the cuttings, being necessary to reach the boiling temperature of heavier hydrocarbons to reach an efficient removal in the operation. The specific energy has a strong influence, reaching a total decontamination using 2.67 kWh/kg. The initial water content was effective in removing oil, reducing the residual level of oil with the increase of initial content of water. It also modifies the temperature profiles of the kinetic-warming of the contaminated cuttings. Both the technology and the equipment used proved effective for obtaining total decontamination of oil from the cuttings. Copyright © 2017 Elsevier Ltd. All rights reserved.

Close coupling of pre- and post-processing vision stations using inexact algorithms

NASA Astrophysics Data System (ADS)

Shih, Chi-Hsien V.; Sherkat, Nasser; Thomas, Peter D.

1996-02-01

Work has been reported using lasers to cut deformable materials. Although the use of laser reduces material deformation, distortion due to mechanical feed misalignment persists. Changes in the lace patten are also caused by the release of tension in the lace structure as it is cut. To tackle the problem of distortion due to material flexibility, the 2VMethod together with the Piecewise Error Compensation Algorithm incorporating the inexact algorithms, i.e., fuzzy logic, neural networks and neural fuzzy technique, are developed. A spring mounted pen is used to emulate the distortion of the lace pattern caused by tactile cutting and feed misalignment. Using pre- and post-processing vision systems, it is possible to monitor the scalloping process and generate on-line information for the artificial intelligence engines. This overcomes the problems of lace distortion due to the trimming process. Applying the algorithms developed, the system can produce excellent results, much better than a human operator.

Public Libraries: Responding to Demand.

ERIC Educational Resources Information Center

Annichiarico, Mark; And Others

1993-01-01

Discussion of problems library wholesalers/distributors face trying to fulfill public libraries' needs while adjusting to a changing industry is based on responses by librarians to a survey on library jobbers. Increased services to libraries, electronic ordering, timeliness, stock management, and quality control are addressed; and a chart of…

Topics in Finance Part IV--Valuation

ERIC Educational Resources Information Center

Laux, Judy

2010-01-01

This article looks at security valuation from the perspective of the financial manager, accenting the relationships to stockholder wealth maximization (SWM), risk and return, and potential agency problems. It also covers some of the pertinent literature related to how investors and creditors price the stocks and bonds of corporations.

Induction and viability of tetraploids in brook trout (Salvelinus fontinalis)

USDA-ARS?s Scientific Manuscript database

Brook trout (Salvelinus fontinalis) populations are threatened by introduction of invasive species, habitat loss, and habitat degradation in their native range; and are a problem invasive species in western Unites States and Canada, and in Europe. Stocking sterile triploids has been promoted as an ...

Introduction: Conceptions of Grammaticalization and Their Problems.

ERIC Educational Resources Information Center

Campbell, Lyle; Janda, Richard

2001-01-01

Introduces the articles in this issue of "Language Sciences," which are dedicated to taking stock of both grammaticalization and so-called "grammaticalization theory." This introduction sets the stage for other papers by surveying the large range of definitions of grammaticalization in the literature and placing them in…

Impact of alternative regeneration methods on genetic diversity in coastal Douglas-fir

USGS Publications Warehouse

Adams, W.T.; Zuo, J.; Shimizu, J.Y.; Tappeiner, J. C.

1998-01-01

Genetic implications of natural and artificial regeneration following three regeneration methods (group selection, shelterwood, and clearcut) were investigated in coastal Douglas-fir (Pseudotsuga menziesii var. menziesii [Mirb.] Franco) using genetic markers (17 allozyme loci). In general, harvesting followed by either natural or artificial regeneration resulted in offspring populations little altered from those in the previous generation. Cutting the smallest trees to form shelterwoods, however, resulted in the removal of rare, presumably deleterious, alleles, such that slightly fewer alleles per locus were observed among residual trees (2.76) and natural regeneration (2.75) than found in uncut (control) stands (2.86). Thus, although the shelterwood regime appears quite compatible with gene conservation, it would be best to leave parent trees of a range of sizes in shelterwoods designated as gene conservation reserves, in order to maximize the number of alleles (regardless of current adaptive value) in naturally regenerated offspring. Seedling stocks used for artificial regeneration in clearcut, shelterwood, and group selection stands (7 total) had significantly greater levels of genetic diversity, on average, than found in natural regeneration. This is probably because the seeds used in artificial seedling stocks came from many wild stands and thus, sampled more diversity than found in single populations. For. Sci. 44(3): 390-396.

Flamenco, a gene controlling the gypsy retrovirus of drosophila melanogaster

DOE Office of Scientific and Technical Information (OSTI.GOV)

Prud`homme, N.; Gans, M.; Masson, M.

1995-02-01

Gypsy is an endogenous retrovirus of Drosophila melanogaster. It is table and does not transpose with detectable frequencies in most Drosophila strains. However, we have characterized unstable strains, known as MG, in which it transposes at high frequency. These stocks contain more copies of gypsy than usual stocks. Transposition results in mutations in several genes such as ovo and cut. They are stable and are due to gypsy insertions. Integrations into the ovo{sup D1} female sterile-dominant mutation result in a null allele of the gene and occurrence of fertile females. This phenomenon, known as the ovo{sup D1} reversion assay, canmore » be used to quantitate gypsy activity. We have shown that the properties of MG strains result from mutation of a host gene that we called flamenco (flam). It has a strict maternal effect on gypsy mobilization: transposition occurs at high frequency only in the germ line of the progeny of females homozygous for mutations of the gene. It is located at position 65.9 (20A1-3) on the X chromosome. The mutant allele present in MG strains is essentially recessive. Flamenco seems to control the infective properties of gypsy. 40 refs., 10 figs., 6 tabs.« less

Fuzzy bi-objective linear programming for portfolio selection problem with magnitude ranking function

NASA Astrophysics Data System (ADS)

Kusumawati, Rosita; Subekti, Retno

2017-04-01

Fuzzy bi-objective linear programming (FBOLP) model is bi-objective linear programming model in fuzzy number set where the coefficients of the equations are fuzzy number. This model is proposed to solve portfolio selection problem which generate an asset portfolio with the lowest risk and the highest expected return. FBOLP model with normal fuzzy numbers for risk and expected return of stocks is transformed into linear programming (LP) model using magnitude ranking function.

densityCut: an efficient and versatile topological approach for automatic clustering of biological data

PubMed Central

Ding, Jiarui; Shah, Sohrab; Condon, Anne

2016-01-01

Motivation: Many biological data processing problems can be formalized as clustering problems to partition data points into sensible and biologically interpretable groups. Results: This article introduces densityCut, a novel density-based clustering algorithm, which is both time- and space-efficient and proceeds as follows: densityCut first roughly estimates the densities of data points from a K-nearest neighbour graph and then refines the densities via a random walk. A cluster consists of points falling into the basin of attraction of an estimated mode of the underlining density function. A post-processing step merges clusters and generates a hierarchical cluster tree. The number of clusters is selected from the most stable clustering in the hierarchical cluster tree. Experimental results on ten synthetic benchmark datasets and two microarray gene expression datasets demonstrate that densityCut performs better than state-of-the-art algorithms for clustering biological datasets. For applications, we focus on the recent cancer mutation clustering and single cell data analyses, namely to cluster variant allele frequencies of somatic mutations to reveal clonal architectures of individual tumours, to cluster single-cell gene expression data to uncover cell population compositions, and to cluster single-cell mass cytometry data to detect communities of cells of the same functional states or types. densityCut performs better than competing algorithms and is scalable to large datasets. Availability and Implementation: Data and the densityCut R package is available from https://bitbucket.org/jerry00/densitycut_dev. Contact: condon@cs.ubc.ca or sshah@bccrc.ca or jiaruid@cs.ubc.ca Supplementary information: Supplementary data are available at Bioinformatics online. PMID:27153661

The precautionary principle in fisheries management under climate change: How the international legal framework formulate it?

NASA Astrophysics Data System (ADS)

Latifah, E.; Imanullah, M. N.

2018-03-01

One of the objectives of fisheries management is to reach long-term sustainable benefits of the fish stocks while reducing the risk of severe or irreversible damage to the marine ecosystem. Achieving this objective needs, the good scientific knowledge and understanding on fisheries management including scientific data and information on the fish stock, fishing catch, distribution, migration, the proportion of mature fish, the mortality rate, reproduction as well as the knowledge on the impact of fishing on dependent and associated species and other species belonging to the same ecosystem, and further the impact of climate change and climate variability on the fish stocks and marine ecosystem. Lack of this scientific knowledge may lead to high levels of uncertainty. The precautionary principle is one of the basic environmental principles needed in overcoming this problem. An essence of this principle is that, in facing the serious risk as a result of the limited scientific knowledge or the absence of complete evidence of harm, it should not prevent the precautionary measures in minimizing risks and protecting the fish stocks and ecosystem. This study aims to examine how the precautionary principle in fisheries management be formulated into the international legal framework, especially under the climate change framework.

Use of the Pediatric Symptom Checklist for the detection of psychosocial problems in preventive child healthcare

PubMed Central

Reijneveld, Sijmen A; Vogels, Anton GC; Hoekstra, Femke; Crone, Matty R

2006-01-01

Background Early detection and treatment of psychosocial problems by preventive child healthcare may lead to considerable health benefits, and a short questionnaire could support this aim. The aim of this study was to assess whether the Dutch version of the US Pediatric Symptom checklist (PSC) is valid and suitable for the early detection of psychosocial problems among children. Methods We included 687 children (response 84.3%) aged 7–12 undergoing routine health assessments in nine Preventive Child Health Services across the Netherlands. Child health professionals interviewed and examined children and parents. Before the interview, parents completed an authorised Dutch translation of the PSC and the Child Behavior Checklist (CBCL). The CBCL and data on the child's current treatment status were used as criteria for the validity of the PSC. Results The consistency of the Dutch PSC was good (Cronbach alpha 0.89). The area under the ROC curve using the CBCL as a criterion was 0.94 (95% confidence interval 0.92 to 0.96). At the US cut-off (28 and above), the prevalence rate of an increased score and sensitivity were lower than in the USA. At a lower cut-off (22 and above), sensitivity and specificity were similar to that of the US version (71.7% and 93.0% respectively). Information on the PSC also helped in the identification of children with elevated CBCL Total Problems Scores, above solely clinical judgment. Conclusion The PSC is also useful for the early detection of psychosocial problems in preventive child healthcare outside the USA, especially with an adjusted cut-off. PMID:16872535

Dynamic graph cuts for efficient inference in Markov Random Fields.

PubMed

Kohli, Pushmeet; Torr, Philip H S

2007-12-01

Abstract-In this paper we present a fast new fully dynamic algorithm for the st-mincut/max-flow problem. We show how this algorithm can be used to efficiently compute MAP solutions for certain dynamically changing MRF models in computer vision such as image segmentation. Specifically, given the solution of the max-flow problem on a graph, the dynamic algorithm efficiently computes the maximum flow in a modified version of the graph. The time taken by it is roughly proportional to the total amount of change in the edge weights of the graph. Our experiments show that, when the number of changes in the graph is small, the dynamic algorithm is significantly faster than the best known static graph cut algorithm. We test the performance of our algorithm on one particular problem: the object-background segmentation problem for video. It should be noted that the application of our algorithm is not limited to the above problem, the algorithm is generic and can be used to yield similar improvements in many other cases that involve dynamic change.

Quantum Max-flow/Min-cut

NASA Astrophysics Data System (ADS)

Cui, Shawn X.; Freedman, Michael H.; Sattath, Or; Stong, Richard; Minton, Greg

2016-06-01

The classical max-flow min-cut theorem describes transport through certain idealized classical networks. We consider the quantum analog for tensor networks. By associating an integral capacity to each edge and a tensor to each vertex in a flow network, we can also interpret it as a tensor network and, more specifically, as a linear map from the input space to the output space. The quantum max-flow is defined to be the maximal rank of this linear map over all choices of tensors. The quantum min-cut is defined to be the minimum product of the capacities of edges over all cuts of the tensor network. We show that unlike the classical case, the quantum max-flow=min-cut conjecture is not true in general. Under certain conditions, e.g., when the capacity on each edge is some power of a fixed integer, the quantum max-flow is proved to equal the quantum min-cut. However, concrete examples are also provided where the equality does not hold. We also found connections of quantum max-flow/min-cut with entropy of entanglement and the quantum satisfiability problem. We speculate that the phenomena revealed may be of interest both in spin systems in condensed matter and in quantum gravity.

Diagnostic assessment without cut-offs: application of serology for the modelling of bovine digital dermatitis infection.

PubMed

Vink, W D; Jones, G; Johnson, W O; Brown, J; Demirkan, I; Carter, S D; French, N P

2009-11-15

Bovine digital dermatitis (BDD) is an epidermitis which is a leading cause of infectious lameness. The only recognized diagnostic test is foot inspection, which is a labour-intensive procedure. There is no universally recognized, standardized lesion scoring system. As small lesions are easily missed, foot inspection has limited diagnostic sensitivity. Furthermore, interpretation is subjective, and prone to observer bias. Serology is more convenient to carry out and is potentially a more sensitive indicator of infection. By carrying out 20 serological assays using lesion-associated Treponema spp. isolates, three serogroups were identified. The reliability of the tests was established by assessing the level of agreement and the concordance correlation coefficient. Subsequently, an ELISA suitable for routine use was developed. The benchmark of diagnostic test validation is conventionally the determination of the key test parameters, sensitivity and specificity. This requires the imposition of a cut-off point. For serological assays with outcomes on a continuous scale, the degree by which the test result differs from this cut-off is disregarded. Bayesian statistical methodology has been developed which enables the assay result also to be interpreted on a continuous scale, thereby optimizing the information inherent in the test. Using a cross-sectional study dataset carried out on 8 representative dairy farms in the UK, the probability of infection, P(I), of each individual animal was estimated in the absence of a 'Gold Standard' by modelling I as a latent variable which was determined by lesion status, L as well as serology, S. Covariate data (foot hygiene score and age) were utilized to estimate P(L) when no lesion inspection was performed. Informative prior distributions were elicited where possible. The model was utilized for predictive inference, by computing estimates of P(I) and P(L) independently of the data. A more detailed and informative analysis of the farm-level distribution of infection could thus be performed. Also, biases associated with the subjective interpretation of lesion status were minimized. Model outputs showed that young stock were unlikely to be infected, whereas cows tended to have high or low probabilities of being infected. Estimates of probability of infection were considerably higher for animals with lesions than for those without. Associations were identified between both covariates and probability of infection in cows, but not in the young stock. Under the condition that the model assumptions are valid for the larger population, the results of this work can be generalized by predictive inference.

Conceptual models of the formation of acid-rock drainage at road cuts in Tennessee

USGS Publications Warehouse

Bradley, Michael W.; Worland, Scott; Byl, Tom

2015-01-01

Pyrite and other minerals containing sulfur and trace metals occur in several rock formations throughout Middle and East Tennessee. Pyrite (FeS2) weathers in the presence of oxygen and water to form iron hydroxides and sulfuric acid. The weathering and interaction of the acid on the rocks and other minerals at road cuts can result in drainage with low pH (< 4) and high concentrations of trace metals. Acid-rock drainage can cause environmental problems and damage transportation infrastructure. The formation and remediation of acid-drainage from roads cuts has not been researched as thoroughly as acid-mine drainage. The U.S Geological Survey, in cooperation with the Tennessee Department of Transportation, is conducting an investigation to better understand the geologic, hydrologic, and biogeochemical factors that control acid formation at road cuts. Road cuts with the potential for acid-rock drainage were identifed and evaluated in Middle and East Tennessee. The pyrite-bearing formations evaluated were the Chattanooga Shale (Devonian black shale), the Fentress Formation (coal-bearing), and the Precambrian Anakeesta Formation and similar Precambrian rocks. Conceptual models of the formation and transport of acid-rock drainage (ARD) from road cuts were developed based on the results of a literature review, site reconnaissance, and the initial rock and water sampling. The formation of ARD requires a combination of hydrologic, geochemical, and microbial interactions which affect drainage from the site, acidity of the water, and trace metal concentrations. The basic modes of ARD formation from road cuts are; 1 - seeps and springs from pyrite-bearing formations and 2 - runoff over the face of a road cut in a pyrite-bearing formation. Depending on site conditions at road cuts, the basic modes of ARD formation can be altered and the additional modes of ARD formation are; 3 - runoff over and through piles of pyrite-bearing material, either from construction or breakdown material weathered from shale, and 4 - the deposition of secondary-sulfate minerals can store trace metals and, during rainfall, result in increased acidity and higher concentrations of trace metals in storm runoff. Understanding the factors that control ARD formation and transport are key to addressing the problems associated with the movement of ARD from the road cuts to the environment. The investigation will provide the Tennessee Department of Transportation with a regional characterization of ARD and provide insights into the geochemical and biochemical attributes for the control and remediation of ARD from road cuts.

Proteomic changes in the base of chrysanthemum cuttings during adventitious root formation

PubMed Central

2013-01-01

Background A lack of competence to form adventitious roots by cuttings of Chrysanthemum (Chrysanthemum morifolium) is an obstacle for the rapid fixation of elite genotypes. We performed a proteomic analysis of cutting bases of chrysanthemum cultivar ‘Jinba’ during adventitious root formation (ARF) in order to identify rooting ability associated protein and/or to get further insight into the molecular mechanisms controlling adventitious rooting. Results The protein profiles during ARF were analyzed by comparing the 2-DE gels between 0-day-old (just severed from the stock plant) and 5-day-old cutting bases of chrysanthemum. A total of 69 differentially accumulated protein spots (two-fold change; t-test: 95% significance) were excised and analyzed using MALDI-TOF/TOF, among which 42 protein spots (assigned as 24 types of proteins and 7 unknown proteins) were confidently identified using the NCBI database. The results demonstrated that 19% proteins were related to carbohydrate and energy metabolism, 16% to photosynthesis, 10% to protein fate, 7% to plant defense, 6% to cell structure, 7% to hormone related, 3% to nitrate metabolism, 3% to lipid metabolism, 3% to ascorbate biosynthesis and 3% to RNA binding, 23% were unknown proteins. Twenty types of differentially accumulated proteins including ACC oxidase (CmACO) were further analyzed at the transcription level, most of which were in accordance with the results of 2-DE. Moreover, the protein abundance changes of CmACO are supported by western blot experiments. Ethylene evolution was higher during the ARF compared with day 0 after cutting, while silver nitrate, an inhibitor of ethylene synthesis, pretreatment delayed the ARF. It suggested that ACC oxidase plays an important role in ARF of chrysanthemum. Conclusions The proteomic analysis of cutting bases of chrysanthemum allowed us to identify proteins whose expression was related to ARF. We identified auxin-induced protein PCNT115 and ACC oxidase positively or negatively correlated to ARF, respectively. Several other proteins related to carbohydrate and energy metabolism, protein degradation, photosynthetic and cell structure were also correlated to ARF. The induction of protein CmACO provide a strong case for ethylene as the immediate signal for ARF. This strongly suggests that the proteins we have identified will be valuable for further insight into the molecular mechanisms controlling ARF. PMID:24369042

Machines employing a hot gas jet to cut metals and nonmetallic materials

DOE Office of Scientific and Technical Information (OSTI.GOV)

Polyaev, V.M.; Aleksandrenkov, V.P.

1995-07-01

The flame-cutting of metals is a basic materials-processing operation performed in the course of machine-building and, in some sectors (shipbuilding, aircraft construction, petrochemicals) it is the most important operation. In addition, this method of cutting remains the main operation performed in the processing of scrap metal. The importance of it has occasioned the development of a wide range of cutting tools within just the last decade. Not surprisingly, VNIIavtogen-mash (the All-Union Scientific Research Institute of Machinery for the Gas Welding and Cutting of Metals) is the leading designer of metal-cutting tools in this country. The problem of efficiently cutting metalsmore » is gaining in importance and will continue to do so in coming years in connection with the conversion of military hardware to other uses, the decommissioning of old and obsolete equipment, and utilization of the enormous reserves of scrap in this country. There will thus be a significant increase in the amounts of existing high-alloy steels, nonferrous metals and their alloys, and composites that require cutting. A wide range of cutters is available for the gas-flame cutting of metals, Liquid fuels based on petroleum products are promising from the viewpoint of energy efficiency and performance. The operation of a new generation of cutters, referred to as thermo-gas jet cutters, is based on the principle of the destructive action of a hot, fast-moving, chemically active jet on the material to be cut.« less

Limiting microbial degradation in Louisiana sugarcane mills: Are biocides effective?

USDA-ARS?s Scientific Manuscript database

Sucrose loss takes place post-harvest in sugarcane, and still represents a significant problem for the global sugar industry. In Louisiana, microorganisms cause the majority of sucrose loss during sugarcane transport to the factory, in cane piles at factory stock yards, and during overnight truck lo...

Use of organic acids and their salts in fish diets: A review

USDA-ARS?s Scientific Manuscript database

In intensive aquaculture production systems, bacterial diseases have been identified as a major industry problem. Loss of over 30 percent of aquaculture populations from stocking to harvest is common, and represents a major economic loss to producers. Feeding antibiotic-medicated feeds is the common...

Interim Guidelines for Growing Longleaf Seedlings in Containers

Treesearch

James P. Barnett; Mark J. Hainds; George A. Hernandez

2002-01-01

The demand for container longleaf pine (Pinus palustris Mill.) planting stock continues to increase each year. A problem facing both producers and users of container seedlings is the lack of target seedling specifications. Outplanting and evaluating performance of seedlings with a range of physiological and morphological characteristics, over a...

Limiting sucrose loss in Louisiana raw sugar factories: Are biocides necessary?

USDA-ARS?s Scientific Manuscript database

Sucrose deterioration takes place post-harvest in sugarcane, and is a significant problem for the sugar industry. In Louisiana, the majority of sucrose destruction occurs when cane is stock piled in mill yards and during overnight truck sleeper loads. Biocides are used in Louisiana raw sugarcane fac...

Top pruning

Treesearch

Thomas D. Landis

2005-01-01

Controlling plant height is always a challenge because shoot growth is stimulated in modem nursery environments (Figure 1). To further aggravate the problem, economics forces nurseries to grow their stock at high densities and so plants want to outgrow their neighbors. Inducing mild stresses helps to slow height growth but this has only limited application. Chemical...

Are herbicides a once in a century method of weed control?

USDA-ARS?s Scientific Manuscript database

Economists have long viewed pesticide resistance as a natural resource problem, in which the stock of pest susceptibility to pesticides is finite, and subject to user costs. Many of the economic approaches to encouraging pesticide stewardship are built on this assumption. Our analysis of public data...

Effort, symptom validity testing, performance validity testing and traumatic brain injury.

PubMed

Bigler, Erin D

2014-01-01

To understand the neurocognitive effects of brain injury, valid neuropsychological test findings are paramount. This review examines the research on what has been referred to a symptom validity testing (SVT). Above a designated cut-score signifies a 'passing' SVT performance which is likely the best indicator of valid neuropsychological test findings. Likewise, substantially below cut-point performance that nears chance or is at chance signifies invalid test performance. Significantly below chance is the sine qua non neuropsychological indicator for malingering. However, the interpretative problems with SVT performance below the cut-point yet far above chance are substantial, as pointed out in this review. This intermediate, border-zone performance on SVT measures is where substantial interpretative challenges exist. Case studies are used to highlight the many areas where additional research is needed. Historical perspectives are reviewed along with the neurobiology of effort. Reasons why performance validity testing (PVT) may be better than the SVT term are reviewed. Advances in neuroimaging techniques may be key in better understanding the meaning of border zone SVT failure. The review demonstrates the problems with rigidity in interpretation with established cut-scores. A better understanding of how certain types of neurological, neuropsychiatric and/or even test conditions may affect SVT performance is needed.

[Revision hip arthroplasty by Waldemar Link custom-made total hip prosthesis].

PubMed

Medenica, Ivica; Luković, Milan; Radoicić, Dragan

2010-02-01

The number of patients undergoing hip arthroplasty revision is constantly growing. Especially, complex problem is extensive loss of bone stock and pelvic discontinuity that requires reconstruction. The paper presented a 50-year old patient, who ten years ago underwent a total cement artrhroplasty of the left hip. A year after the primary operation the patient had difficulties in walking without crutches. Problems intensified in the last five years, the patient had severe pain, totally limited movement in the left hip and could not walk at all. Radiographically, we found loose femoral component, massive loss of bone stock of proximal femur, acetabular protrusion and a consequent pelvic discontinuity. Clinically, a completely disfunctional left hip joint was registered (Harris hip score--7.1). We performed total rearthroplasty by a custom-made Waldemar Link total hip prosthesis with acetabular antiprotrusio cage and compensation of bone defects with a graft from the bone bank. A year after the operation, we found clinically an extreme improvement in Harris hip score--87.8. Radiographically, we found stability of implanted components, a complete graft integration and bone bridging across the site of pelvic discontinuity. Pelvic discontinuity and massive loss of proximal femoral bone stock is a challenging and complex entity. Conventional prostheses cannot provide an adequate fixation and stability of the hip. Application of custom-made prosthesis (measured specificaly for a patient) and additional alografting bone defects is a good method in revision surgery after unsuccessful hip arthroplasty with extensive bone defects.

Environment and Culture in India.

ERIC Educational Resources Information Center

Leuthold, David

India suffers from severe environmental problems with respect to deforestation, flooding, and pollution. These problems are associated with industrialization, lack of money to enforce anti-pollution practices, climatic and population pressures, and cultural factors. Half of India's forests have been cut in the last 40 years. Deforestation is the…

Vineyard Colonization by Hyalesthes obsoletus (Hemiptera: Cixiidae) Induced by Stinging Nettle Cut Along Surrounding Ditches.

PubMed

Mori, N; Pozzebon, A; Duso, C; Reggiani, N; Pavan, F

2016-02-01

Stinging nettle (Urtica dioica L.) is the most important host plant for both phytoplasma associated with Bois noir disease of the grapevine and its vector Hyalesthes obsoletus Signoret (Hemiptera: Cixiidae). Vector abundance in vineyards is favored by stinging nettle growing in surrounding areas. Nettle control by herbicides or cutting can reduce vector population in vineyards. However, chemical weeding can cause environmental problems. Many authors suggest that stinging nettle control applied during H. obsoletus flight could force adults to migrate into vineyards. We evaluate if cutting of nettle growing along ditches during adult flight favors vineyard colonization by H. obsoletus. Three different weed management regimes ("no cuts," "one cut" just before the beginning of adult flight, and "frequent cuts" over the whole vegetative season) were applied to the herbaceous vegetation in ditches bordering two vineyards. The flight dynamics of H. obsoletus were recorded by placing yellow sticky traps on the vegetation along the ditches and at different positions in the vineyards. Frequent stinging nettle cuts (compared with a single cut) in surrounding areas favored the dispersion of vectors inside the vineyards. Stinging nettle control should be based on an integration of a single herbicide application before H. obsoletus emergence followed by frequent cuts to minimize negative side effects of chemical weeding. In organic viticulture, a frequent-cuts strategy should avoid cuts during H. obsoletus flight period, at least in the first year of adoption. © The Authors 2015. Published by Oxford University Press on behalf of Entomological Society of America. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Environmental trade-offs of tunnels vs cut-and-cover subways

USGS Publications Warehouse

Walton, M.

1978-01-01

Heavy construction projects in cities entail two kinds of cost - internal cost, which can be defined in terms of payments from one set of parties to another, and external cost, which is the cost borne by the community at large as the result of disutilities entailed in construction and operation. Environmental trade-offs involve external costs, which are commonly difficult to measure. Cut-and-cover subway construction probably entails higher external and internal cost than deep tunnel construction in many urban geological environments, but uncertainty concerning the costs and environmental trade-offs of tunneling leads to limited and timid use of tunneling by American designers. Thus uncertainty becomes a major trade-off which works against tunneling. The reverse is true in Sweden after nearly 30 years of subway construction. Econometric methods for measuring external costs exist in principle, but are limited in application. Economic theory based on market pressure does not address the real problem of urban environmental trade-offs. Nevertheless, the problem of uncertainty can be addressed by comparative studies of estimated and as-built costs of cut-and-cover vs tunnel projects and a review of environmental issues associated with such construction. Such a study would benefit the underground construction industry and the design of transportation systems. It would also help solve an aspect of the urban problem. ?? 1978.

Cut and join operator ring in tensor models

NASA Astrophysics Data System (ADS)

Itoyama, H.; Mironov, A.; Morozov, A.

2018-07-01

Recent advancement of rainbow tensor models based on their superintegrability (manifesting itself as the existence of an explicit expression for a generic Gaussian correlator) has allowed us to bypass the long-standing problem seen as the lack of eigenvalue/determinant representation needed to establish the KP/Toda integrability. As the mandatory next step, we discuss in this paper how to provide an adequate designation to each of the connected gauge-invariant operators that form a double coset, which is required to cleverly formulate a tree-algebra generalization of the Virasoro constraints. This problem goes beyond the enumeration problem per se tied to the permutation group, forcing us to introduce a few gauge fixing procedures to the coset. We point out that the permutation-based labeling, which has proven to be relevant for the Gaussian averages is, via interesting complexity, related to the one based on the keystone trees, whose algebra will provide the tensor counterpart of the Virasoro algebra for matrix models. Moreover, our simple analysis reveals the existence of nontrivial kernels and co-kernels for the cut operation and for the join operation respectively that prevent a straightforward construction of the non-perturbative RG-complete partition function and the identification of truly independent time variables. We demonstrate these problems by the simplest non-trivial Aristotelian RGB model with one complex rank-3 tensor, studying its ring of gauge-invariant operators, generated by the keystone triple with the help of four operations: addition, multiplication, cut and join.

A novel stock forecasting model based on High-order-fuzzy-fluctuation Trends and Back Propagation Neural Network

PubMed Central

Dai, Zongli; Zhao, Aiwu; He, Jie

2018-01-01

In this paper, we propose a hybrid method to forecast the stock prices called High-order-fuzzy-fluctuation-Trends-based Back Propagation(HTBP)Neural Network model. First, we compare each value of the historical training data with the previous day's value to obtain a fluctuation trend time series (FTTS). On this basis, the FTTS blur into fuzzy time series (FFTS) based on the fluctuation of the increasing, equality, decreasing amplitude and direction. Since the relationship between FFTS and future wave trends is nonlinear, the HTBP neural network algorithm is used to find the mapping rules in the form of self-learning. Finally, the results of the algorithm output are used to predict future fluctuations. The proposed model provides some innovative features:(1)It combines fuzzy set theory and neural network algorithm to avoid overfitting problems existed in traditional models. (2)BP neural network algorithm can intelligently explore the internal rules of the actual existence of sequential data, without the need to analyze the influence factors of specific rules and the path of action. (3)The hybrid modal can reasonably remove noises from the internal rules by proper fuzzy treatment. This paper takes the TAIEX data set of Taiwan stock exchange as an example, and compares and analyzes the prediction performance of the model. The experimental results show that this method can predict the stock market in a very simple way. At the same time, we use this method to predict the Shanghai stock exchange composite index, and further verify the effectiveness and universality of the method. PMID:29420584

A novel stock forecasting model based on High-order-fuzzy-fluctuation Trends and Back Propagation Neural Network.

PubMed

Guan, Hongjun; Dai, Zongli; Zhao, Aiwu; He, Jie

2018-01-01

In this paper, we propose a hybrid method to forecast the stock prices called High-order-fuzzy-fluctuation-Trends-based Back Propagation(HTBP)Neural Network model. First, we compare each value of the historical training data with the previous day's value to obtain a fluctuation trend time series (FTTS). On this basis, the FTTS blur into fuzzy time series (FFTS) based on the fluctuation of the increasing, equality, decreasing amplitude and direction. Since the relationship between FFTS and future wave trends is nonlinear, the HTBP neural network algorithm is used to find the mapping rules in the form of self-learning. Finally, the results of the algorithm output are used to predict future fluctuations. The proposed model provides some innovative features:(1)It combines fuzzy set theory and neural network algorithm to avoid overfitting problems existed in traditional models. (2)BP neural network algorithm can intelligently explore the internal rules of the actual existence of sequential data, without the need to analyze the influence factors of specific rules and the path of action. (3)The hybrid modal can reasonably remove noises from the internal rules by proper fuzzy treatment. This paper takes the TAIEX data set of Taiwan stock exchange as an example, and compares and analyzes the prediction performance of the model. The experimental results show that this method can predict the stock market in a very simple way. At the same time, we use this method to predict the Shanghai stock exchange composite index, and further verify the effectiveness and universality of the method.

State network approach to characteristics of financial crises

NASA Astrophysics Data System (ADS)

Qiu, Lu; Gu, Changgui; Xiao, Qin; Yang, Huijie; Wu, Guolin

2018-02-01

Extensive works have reported that a financial crisis can induce significant changes to topological structure of a stock network constructed with cross-correlations between stocks. But there are still some problems to be answered, such as what is the relationship between different crises in history and how to classify them? In the present work, we propose a new network-based solution to extract and display the relationships between the crises. The Dow Jones stock market is investigated as a typical example. The cross-correlation matrix between stocks is used to measure the state of stock market, called state matrix. All the states cluster into six sub-categories. A state network is constructed further to display the relationships between all the states, which contains a total of nine communities. It is found that three crises C , D and E (refer to the Lehman's bankruptcy in 2008, the Euro-zone and International Monetary Fund decide the first bailout for Greece in 2010, and the European sovereign debt crisis in 2011, respectively) belong to a specific sub-category and cluster in a single community. The mid-stage of C is closely linked with E, while the other stages with D. The other two crises A and B (refer to the financial crisis in Asia in 1997, and the burst of "dot-com bubble" in 2002, respectively) belong to another sub-category and gather in a corner of another single community. A and B are linked directly with C and D by two edges. By this way, we give a clear picture of the relationships between the crises.

Lecture Notes on Requirements Elicitation

DTIC Science & Technology

1994-03-01

ability to abstract away from the details of a problem and design a system that not only solves the problem but incorporates cutting-edge technology and...sound argument is presented. You have the uncanny ability to abstract away from the details of a problem and design a system that not only solves the... problem - solving skills on your last project, where you were the principle requirements analyst. Your undergraduate degree is in mathematics , and you

Remarks on a financial inverse problem by means of Monte Carlo Methods

NASA Astrophysics Data System (ADS)

Cuomo, Salvatore; Di Somma, Vittorio; Sica, Federica

2017-10-01

Estimating the price of a barrier option is a typical inverse problem. In this paper we present a numerical and statistical framework for a market with risk-free interest rate and a risk asset, described by a Geometric Brownian Motion (GBM). After approximating the risk asset with a numerical method, we find the final option price by following an approach based on sequential Monte Carlo methods. All theoretical results are applied to the case of an option whose underlying is a real stock.

Development, Application and Assessment of a Taxonomy for Characterizing International Environmental Problems

DTIC Science & Technology

1990-01-01

Population at risk 3579 NOTES. No one in the U.S. is effected ( health effects ) by a food shortage due to a drought 8. Land area at risk 1 3 5 Q 9 NOTES: Amount...adequately captures the characteristics most people are concerned with--human health , ecological effects , and welfare--for these problems. Because of...reasons as in India: Pure Food (10) is included because of the effects of pesticides, while Animal Habitat (9) and Stock of Wildlife (23) are included

Problems of increased transport load as a result of implementation of projects of high-rise constructions

NASA Astrophysics Data System (ADS)

Provotorov, Ivan; Gasilov, Valentin; Anisimova, Nadezhda

2018-03-01

The structure of problems of high-rise construction us suggested, which includes the impact on environment, design solutions, transportation problems, financial costs for construction and operation, and others. Positive and negative aspects of high-rise construction are considered. One of the basic problems of high-rise construction is the problem of increased transport load. Construction of the subway on the basis of the concession mechanism, with the use of unmanned control of rolling stock is proposed as the most expedient solution. An evaluation of the effectiveness of this project is presented, it shows quite high performance indicators for a private investor. Main problems that the project implementation may face in conditions of lack of scientific and methodological support are outlined.

Governance of agro-pesticide through private environmental and social standards in the global cut flower chain from Ethiopia.

PubMed

Mengistie, Belay T; Mol, Arthur P J; Oosterveer, Peter

2017-11-01

The international cut flower industry is strongly criticized because of its environmental impacts and unsafe working conditions. Increasing certification of cut flowers is used to improve the growers' environmental and social performance. But what is the impact of this private governance instrument on regulating the use of pesticides? This paper assesses the potential of private certification on governing the environmental and social problems from pesticide use along the global cut flower supply chain. We use detailed farm-level data to analyse the environmental and social impacts of flower certification in Ethiopia by comparing different national and international certification schemes. Our analysis does not show significant differences between these different private standards for most environmental and health and safety variables. The Ethiopian cut flower industry remains far from improving its sustainability performance through private certification. However, certification schemes may enable farmers to have access to international markets and keep up their reputation.

Assessment for Intervention: A Problem-Solving Approach

ERIC Educational Resources Information Center

Brown-Chidsey, Rachel, Ed.

2005-01-01

This cutting-edge volume offers a complete primer on conducting problem-solving based assessments in school or clinical settings. Presented are an effective framework and up-to-date tools for identifying and remediating the many environmental factors that may contribute to a student's academic, emotional, or behavioral difficulties, and for…

Rooting of conifer propagules

Treesearch

R.L. Mott

1977-01-01

An outline of the general problems involved with the propagation of elite conifer clones by rooted cuttings is drawn from published reports. New approaches for resolving these problems can come from studies of clone production through tissue culture methods. Probable extension of tissue culture techniques will permit the establishment of clones from adult, proven trees...

Programmable Gain Amplifiers with DC Suppression and Low Output Offset for Bioelectric Sensors

PubMed Central

Carrera, Albano; de la Rosa, Ramón; Alonso, Alonso

2013-01-01

DC-offset and DC-suppression are key parameters in bioelectric amplifiers. However, specific DC analyses are not often explained. Several factors influence the DC-budget: the programmable gain, the programmable cut-off frequencies for high pass filtering and, the low cut-off values and the capacitor blocking issues involved. A new intermediate stage is proposed to address the DC problem entirely. Two implementations were tested. The stage is composed of a programmable gain amplifier (PGA) with DC-rejection and low output offset. Cut-off frequencies are selectable and values from 0.016 to 31.83 Hz were tested, and the capacitor deblocking is embedded in the design. Hence, this PGA delivers most of the required gain with constant low output offset, notwithstanding the gain or cut-off frequency selected. PMID:24084109

Management Impacts on Carbon Dynamics in a Sierra Nevada Mixed Conifer Forest

PubMed Central

Dore, Sabina; Fry, Danny L.; Collins, Brandon M.; Vargas, Rodrigo; York, Robert A.; Stephens, Scott L.

2016-01-01

Forest ecosystems can act as sinks of carbon and thus mitigate anthropogenic carbon emissions. When forests are actively managed, treatments can alter forests carbon dynamics, reducing their sink strength and switching them from sinks to sources of carbon. These effects are generally characterized by fast temporal dynamics. Hence this study monitored for over a decade the impacts of management practices commonly used to reduce fire hazards on the carbon dynamics of mixed-conifer forests in the Sierra Nevada, California, USA. Soil CO2 efflux, carbon pools (i.e. soil carbon, litter, fine roots, tree biomass), and radial tree growth were compared among un-manipulated controls, prescribed fire, thinning, thinning followed by fire, and two clear-cut harvested sites. Soil CO2 efflux was reduced by both fire and harvesting (ca. 15%). Soil carbon content (upper 15 cm) was not significantly changed by harvest or fire treatments. Fine root biomass was reduced by clear-cut harvest (60–70%) but not by fire, and the litter layer was reduced 80% by clear-cut harvest and 40% by fire. Thinning effects on tree growth and biomass were concentrated in the first year after treatments, whereas fire effects persisted over the seven-year post-treatment period. Over this period, tree radial growth was increased (25%) by thinning and reduced (12%) by fire. After seven years, tree biomass returned to pre-treatment levels in both fire and thinning treatments; however, biomass and productivity decreased 30%-40% compared to controls when thinning was combined with fire. The clear-cut treatment had the strongest impact, reducing ecosystem carbon stocks and delaying the capacity for carbon uptake. We conclude that post-treatment carbon dynamics and ecosystem recovery time varied with intensity and type of treatments. Consequently, management practices can be selected to minimize ecosystem carbon losses while increasing future carbon uptake, resilience to high severity fire, and climate related stresses. PMID:26918460

Brain surgery

MedlinePlus

Craniotomy; Surgery - brain; Neurosurgery; Craniectomy; Stereotactic craniotomy; Stereotactic brain biopsy; Endoscopic craniotomy ... cut depends on where the problem in the brain is located. The surgeon creates a hole in ...

Second-order polynomial model to solve the least-cost lumber grade mix problem

Treesearch

Urs Buehlmann; Xiaoqiu Zuo; R. Edward Thomas

2010-01-01

Material costs when cutting solid wood parts from hardwood lumber for secondary wood products manufacturing account for 20 to 50 percent of final product cost. These costs can be minimized by proper selection of the lumber quality used. The lumber quality selection problem is referred to as the least-cost lumber grade mix problem in the industry. The objective of this...

A cross-sectional pilot study assessing needs and attitudes to implementation of Information and Communication Technology for rational use of medicines among healthcare staff in rural Tanzania.

PubMed

Nilseng, Jessica; Gustafsson, Lars L; Nungu, Amos; Bastholm-Rahmner, Pia; Mazali, Dennis; Pehrson, Björn; Eriksen, Jaran

2014-08-27

In resource-poor countries access to essential medicines, suboptimal prescribing and use of medicines are major problems. Health workers lack updated medical information and treatment support. Information and Communication Technology (ICT) could help tackle this. The impact of ICT on health systems in resource-poor countries is likely to be significant and transform the practice of medicine just as in high-income countries. However, research for finding the best way of doing this is needed. We aimed to assess current approaches to and use of ICT among health workers in two rural districts of Tanzania in relation to the current drug distribution practices, drug stock and continuing medical information (CME), as well as assessing the feasibility of using ICT to improve ordering and use of medicines. This pilot study was conducted in 2010-2011, mapping the drug distribution chain in Tanzania, including problems and barriers. The study was conducted in Bunda and Serengeti districts, both part of the ICT4RD (ICT for rural development) project. Health workers involved in drug procurement and use at 13 health facilities were interviewed on use and knowledge of ICT, and their attitudes to its use in their daily work. They were also shown and interviewed about their thoughts on an android tablet application prototype for drug stock inventory and drug ordering, based on the Tanzanian Medical Stores Department (MSD) current paper forms. The main challenge was a stable supply of essential medicines. Drug supplies were often delayed and incomplete, resulting in stock-outs. All 20 interviewed health workers used mobile phones, 8 of them Smartphones with Internet connection. The Health workers were very positive to the tablet application and saw its potential in reducing drug stock-outs. They also expressed a great need and wish for CME by distance. The tablet application was easily used and appreciated by health workers, and thus has the potential to save time and effort, reduce transportation costs and minimise drug stock-outs. Furthermore, the android tablet could be used to reach out with CME programs to health care workers at remote health facilities, as well as those in towns.

A cross-sectional pilot study assessing needs and attitudes to implementation of Information and Communication Technology for rational use of medicines among healthcare staff in rural Tanzania

PubMed Central

2014-01-01

Background In resource-poor countries access to essential medicines, suboptimal prescribing and use of medicines are major problems. Health workers lack updated medical information and treatment support. Information and Communication Technology (ICT) could help tackle this. The impact of ICT on health systems in resource-poor countries is likely to be significant and transform the practice of medicine just as in high-income countries. However, research for finding the best way of doing this is needed. We aimed to assess current approaches to and use of ICT among health workers in two rural districts of Tanzania in relation to the current drug distribution practices, drug stock and continuing medical information (CME), as well as assessing the feasibility of using ICT to improve ordering and use of medicines. Methods This pilot study was conducted in 2010–2011, mapping the drug distribution chain in Tanzania, including problems and barriers. The study was conducted in Bunda and Serengeti districts, both part of the ICT4RD (ICT for rural development) project. Health workers involved in drug procurement and use at 13 health facilities were interviewed on use and knowledge of ICT, and their attitudes to its use in their daily work. They were also shown and interviewed about their thoughts on an android tablet application prototype for drug stock inventory and drug ordering, based on the Tanzanian Medical Stores Department (MSD) current paper forms. Results The main challenge was a stable supply of essential medicines. Drug supplies were often delayed and incomplete, resulting in stock-outs. All 20 interviewed health workers used mobile phones, 8 of them Smartphones with Internet connection. The Health workers were very positive to the tablet application and saw its potential in reducing drug stock-outs. They also expressed a great need and wish for CME by distance. Conclusion The tablet application was easily used and appreciated by health workers, and thus has the potential to save time and effort, reduce transportation costs and minimise drug stock-outs. Furthermore, the android tablet could be used to reach out with CME programs to health care workers at remote health facilities, as well as those in towns. PMID:25158806

Random walk and graph cut based active contour model for three-dimension interactive pituitary adenoma segmentation from MR images

NASA Astrophysics Data System (ADS)

Sun, Min; Chen, Xinjian; Zhang, Zhiqiang; Ma, Chiyuan

2017-02-01

Accurate volume measurements of pituitary adenoma are important to the diagnosis and treatment for this kind of sellar tumor. The pituitary adenomas have different pathological representations and various shapes. Particularly, in the case of infiltrating to surrounding soft tissues, they present similar intensities and indistinct boundary in T1-weighted (T1W) magnetic resonance (MR) images. Then the extraction of pituitary adenoma from MR images is still a challenging task. In this paper, we propose an interactive method to segment the pituitary adenoma from brain MR data, by combining graph cuts based active contour model (GCACM) and random walk algorithm. By using the GCACM method, the segmentation task is formulated as an energy minimization problem by a hybrid active contour model (ACM), and then the problem is solved by the graph cuts method. The region-based term in the hybrid ACM considers the local image intensities as described by Gaussian distributions with different means and variances, expressed as maximum a posteriori probability (MAP). Random walk is utilized as an initialization tool to provide initialized surface for GCACM. The proposed method is evaluated on the three-dimensional (3-D) T1W MR data of 23 patients and compared with the standard graph cuts method, the random walk method, the hybrid ACM method, a GCACM method which considers global mean intensity in region forces, and a competitive region-growing based GrowCut method planted in 3D Slicer. Based on the experimental results, the proposed method is superior to those methods.

Comparison of vector autoregressive (VAR) and vector error correction models (VECM) for index of ASEAN stock price

NASA Astrophysics Data System (ADS)

Suharsono, Agus; Aziza, Auliya; Pramesti, Wara

2017-12-01

Capital markets can be an indicator of the development of a country's economy. The presence of capital markets also encourages investors to trade; therefore investors need information and knowledge of which shares are better. One way of making decisions for short-term investments is the need for modeling to forecast stock prices in the period to come. Issue of stock market-stock integration ASEAN is very important. The problem is that ASEAN does not have much time to implement one market in the economy, so it would be very interesting if there is evidence whether the capital market in the ASEAN region, especially the countries of Indonesia, Malaysia, Philippines, Singapore and Thailand deserve to be integrated or still segmented. Furthermore, it should also be known and proven What kind of integration is happening: what A capital market affects only the market Other capital, or a capital market only Influenced by other capital markets, or a Capital market as well as affecting as well Influenced by other capital markets in one ASEAN region. In this study, it will compare forecasting of Indonesian share price (IHSG) with neighboring countries (ASEAN) including developed and developing countries such as Malaysia (KLSE), Singapore (SGE), Thailand (SETI), Philippines (PSE) to find out which stock country the most superior and influential. These countries are the founders of ASEAN and share price index owners who have close relations with Indonesia in terms of trade, especially exports and imports. Stock price modeling in this research is using multivariate time series analysis that is VAR (Vector Autoregressive) and VECM (Vector Error Correction Modeling). VAR and VECM models not only predict more than one variable but also can see the interrelations between variables with each other. If the assumption of white noise is not met in the VAR modeling, then the cause can be assumed that there is an outlier. With this modeling will be able to know the pattern of relationship or linkage of share prices of each country in ASEAN. The best modeling comparison result of the ASEAN stock price index is VAR.

An accurate algorithm for the detection of DNA fragments from dilution pool sequencing experiments.

PubMed

Bansal, Vikas

2018-01-01

The short read lengths of current high-throughput sequencing technologies limit the ability to recover long-range haplotype information. Dilution pool methods for preparing DNA sequencing libraries from high molecular weight DNA fragments enable the recovery of long DNA fragments from short sequence reads. These approaches require computational methods for identifying the DNA fragments using aligned sequence reads and assembling the fragments into long haplotypes. Although a number of computational methods have been developed for haplotype assembly, the problem of identifying DNA fragments from dilution pool sequence data has not received much attention. We formulate the problem of detecting DNA fragments from dilution pool sequencing experiments as a genome segmentation problem and develop an algorithm that uses dynamic programming to optimize a likelihood function derived from a generative model for the sequence reads. This algorithm uses an iterative approach to automatically infer the mean background read depth and the number of fragments in each pool. Using simulated data, we demonstrate that our method, FragmentCut, has 25-30% greater sensitivity compared with an HMM based method for fragment detection and can also detect overlapping fragments. On a whole-genome human fosmid pool dataset, the haplotypes assembled using the fragments identified by FragmentCut had greater N50 length, 16.2% lower switch error rate and 35.8% lower mismatch error rate compared with two existing methods. We further demonstrate the greater accuracy of our method using two additional dilution pool datasets. FragmentCut is available from https://bansal-lab.github.io/software/FragmentCut. vibansal@ucsd.edu. Supplementary data are available at Bioinformatics online. © The Author 2017. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com

Stock in Trade: The Role of English in International Trade Proceedings.

ERIC Educational Resources Information Center

Cremer, Rolf D.; Willes, Mary J.

1991-01-01

Examines the use of English by merchandisers in Macao, where the required proficiency exceeds that these individuals can be expected to possess. Examples of serious language mistakes are given and contextual and other clues are identified. Possible solutions for these problems are suggested and potential directions of further enquiry are explored.…

The Shell Game: Publishers, Vendors, and the Myth of the Backlist.

ERIC Educational Resources Information Center

Eaglen, Audrey

1992-01-01

Discusses problems with obtaining backlist titles of children's books, based on the experiences of the Cuyahoga County Public Library (Ohio). Types of book order lists, selection, and ordering procedures are described; and examples of out-of-stock items and fill rates for new juvenile, young adult, and adult titles are presented. (MES)

Optimal stocking of species by diameter class for even-aged mid-to-late rotation Appalachian hardwoods

Treesearch

Joseph B. Roise; Joosang Chung; Chris B. LeDoux

1988-01-01

Nonlinear programming (NP) is applied to the problem of finding optimal thinning and harvest regimes simultaneously with species mix and diameter class distribution. Optimal results for given cases are reported. Results of the NP optimization are compared with prescriptions developed by Appalachian hardwood silviculturists.

Problem Scoping Design Thinking and Close Reading: Makerspaces in the School Library

ERIC Educational Resources Information Center

Blakemore, Megan

2018-01-01

Makerspaces, collaborative workspaces stocked with materials and tools for creating, building, designing, and learning, are becoming more and more common in schools and, in particular, in school libraries. Makerspaces in the school library allow for connections between making and literacy. Indeed, such connections are authentic and natural as…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vanderbei, Robert J., E-mail: rvdb@princeton.edu; P Latin-Small-Letter-Dotless-I nar, Mustafa C., E-mail: mustafap@bilkent.edu.tr; Bozkaya, Efe B.

An American option (or, warrant) is the right, but not the obligation, to purchase or sell an underlying equity at any time up to a predetermined expiration date for a predetermined amount. A perpetual American option differs from a plain American option in that it does not expire. In this study, we solve the optimal stopping problem of a perpetual American option (both call and put) in discrete time using linear programming duality. Under the assumption that the underlying stock price follows a discrete time and discrete state Markov process, namely a geometric random walk, we formulate the pricing problemmore » as an infinite dimensional linear programming (LP) problem using the excessive-majorant property of the value function. This formulation allows us to solve complementary slackness conditions in closed-form, revealing an optimal stopping strategy which highlights the set of stock-prices where the option should be exercised. The analysis for the call option reveals that such a critical value exists only in some cases, depending on a combination of state-transition probabilities and the economic discount factor (i.e., the prevailing interest rate) whereas it ceases to be an issue for the put.« less

Quantum Max-flow/Min-cut

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cui, Shawn X., E-mail: xingshan@math.ucsb.edu; Quantum Architectures and Computation Group, Microsoft Research, Redmond, Washington 98052; Freedman, Michael H., E-mail: michaelf@microsoft.com

2016-06-15

The classical max-flow min-cut theorem describes transport through certain idealized classical networks. We consider the quantum analog for tensor networks. By associating an integral capacity to each edge and a tensor to each vertex in a flow network, we can also interpret it as a tensor network and, more specifically, as a linear map from the input space to the output space. The quantum max-flow is defined to be the maximal rank of this linear map over all choices of tensors. The quantum min-cut is defined to be the minimum product of the capacities of edges over all cuts ofmore » the tensor network. We show that unlike the classical case, the quantum max-flow=min-cut conjecture is not true in general. Under certain conditions, e.g., when the capacity on each edge is some power of a fixed integer, the quantum max-flow is proved to equal the quantum min-cut. However, concrete examples are also provided where the equality does not hold. We also found connections of quantum max-flow/min-cut with entropy of entanglement and the quantum satisfiability problem. We speculate that the phenomena revealed may be of interest both in spin systems in condensed matter and in quantum gravity.« less

Application of Kanban System on a hospital pharmacy.

PubMed

Mitka, Eleftheria

2015-01-01

This is a brief overview of principles, views and methods, of the Kanban System for the pharmacy of a general hospital. The main goal is the reduction of stores managed by the pharmacy, as well as improvement of the mode of operation. Solutions to problems, such as inadequate storage space, the delay in serving patients or clinics and the expiration of various pharmaceutical formulations, stored for so long time, are provided. The philosophy behind the Kanban procurement System and specifically its applicability to a pharmacy underperforming in terms of efficiency, in Greece, are described. Based on the analysis of stock requirement, item stock prices and demand, it is concluded that a significant percentage of the stocked drugs can be procured using the Kanban System. Significant cost savings and operational advantages following the Kanban System will take place. The challenging endeavor is the analysis, design and application of a system that supports the proposed procurement method. Hospital pharmacies in Greece and in other countries that face an economic crisis may largely benefit after using the Kanban System.

Influence of light-dark schedules and stocking density on behaviour, risk of leg problems and occurrence of chronic fear in broilers.

PubMed

Sanotra, G S; Lund, J Damkjer; Vestergaard, K S

2002-07-01

1. The aims of this study were to determine (1) the effect of light-dark schedules on the walking ability, the risk of tibial dyschondroplasia (TD) as well as the duration of tonic immobility (TI) reactions in commercial broiler flocks and (2) the effect of a daily dark period and reduced density on the behaviour of broiler chickens. 2. Experiment 1. Group 1 had a 2 to 8 h daily dark period from 2 to 26 d of age (light-dark programme A) at a stocking density of 28.4 chicks/m2. Group 2 had 8 h of darkness daily from 2 to 38 d of age (light-dark programme B) at 24 chicks/m2. The control group had 24 h continuous light at 28.4 chicks/m2. 3. Experiment 2. Behaviour was studied with and without a daily 8 h dark period and at high (30 chicks/m2) and low (18 chicks/m2) stocking densities. 4. Programme B reduced the prevalence of impaired walking ability, corresponding to gait score > 2, when compared with controls. The effect on walking ability corresponding to gait score > 0 approached significance. 5. Both light-dark programmes reduced the occurrence of TD. Programme B (combined with reduced stocking density), however, had the greater effect. 6. Both light-dark programmes reduced the duration of TI, compared with controls (mean = 426 s) Programme B resulted in a larger reduction (alpha = -156.9 s) than programme A (alpha = -117.0). 7. The proportions of chicks drinking, eating, pecking, scratching, standing and performing vertical wing-shakes increased--both when the 8 h dark period and the reduced stocking density were applied separately and in combination (experiment 2). 8. For all behaviours, except standing, the effect of the dark period was largest in broilers kept at the high stocking density (d 40).

Superpixel Cut for Figure-Ground Image Segmentation

NASA Astrophysics Data System (ADS)

Yang, Michael Ying; Rosenhahn, Bodo

2016-06-01

Figure-ground image segmentation has been a challenging problem in computer vision. Apart from the difficulties in establishing an effective framework to divide the image pixels into meaningful groups, the notions of figure and ground often need to be properly defined by providing either user inputs or object models. In this paper, we propose a novel graph-based segmentation framework, called superpixel cut. The key idea is to formulate foreground segmentation as finding a subset of superpixels that partitions a graph over superpixels. The problem is formulated as Min-Cut. Therefore, we propose a novel cost function that simultaneously minimizes the inter-class similarity while maximizing the intra-class similarity. This cost function is optimized using parametric programming. After a small learning step, our approach is fully automatic and fully bottom-up, which requires no high-level knowledge such as shape priors and scene content. It recovers coherent components of images, providing a set of multiscale hypotheses for high-level reasoning. We evaluate our proposed framework by comparing it to other generic figure-ground segmentation approaches. Our method achieves improved performance on state-of-the-art benchmark databases.

A novel heterogeneous training sample selection method on space-time adaptive processing

NASA Astrophysics Data System (ADS)

Wang, Qiang; Zhang, Yongshun; Guo, Yiduo

2018-04-01

The performance of ground target detection about space-time adaptive processing (STAP) decreases when non-homogeneity of clutter power is caused because of training samples contaminated by target-like signals. In order to solve this problem, a novel nonhomogeneous training sample selection method based on sample similarity is proposed, which converts the training sample selection into a convex optimization problem. Firstly, the existing deficiencies on the sample selection using generalized inner product (GIP) are analyzed. Secondly, the similarities of different training samples are obtained by calculating mean-hausdorff distance so as to reject the contaminated training samples. Thirdly, cell under test (CUT) and the residual training samples are projected into the orthogonal subspace of the target in the CUT, and mean-hausdorff distances between the projected CUT and training samples are calculated. Fourthly, the distances are sorted in order of value and the training samples which have the bigger value are selective preference to realize the reduced-dimension. Finally, simulation results with Mountain-Top data verify the effectiveness of the proposed method.

Integrating dynamic fuzzy C-means, data envelopment analysis and artificial neural network to online prediction performance of companies in stock exchange

NASA Astrophysics Data System (ADS)

Jahangoshai Rezaee, Mustafa; Jozmaleki, Mehrdad; Valipour, Mahsa

2018-01-01

One of the main features to invest in stock exchange companies is their financial performance. On the other hand, conventional evaluation methods such as data envelopment analysis are not only a retrospective process, but are also a process, which are incomplete and ineffective approaches to evaluate the companies in the future. To remove this problem, it is required to plan an expert system for evaluating organizations when the online data are received from stock exchange market. This paper deals with an approach for predicting the online financial performance of companies when data are received in different time's intervals. The proposed approach is based on integrating fuzzy C-means (FCM), data envelopment analysis (DEA) and artificial neural network (ANN). The classical FCM method is unable to update the number of clusters and their members when the data are changed or the new data are received. Hence, this method is developed in order to make dynamic features for the number of clusters and clusters members in classical FCM. Then, DEA is used to evaluate DMUs by using financial ratios to provide targets in neural network. Finally, the designed network is trained and prepared for predicting companies' future performance. The data on Tehran Stock Market companies for six consecutive years (2007-2012) are used to show the abilities of the proposed approach.

High performance genetic algorithm for VLSI circuit partitioning

NASA Astrophysics Data System (ADS)

Dinu, Simona

2016-12-01

Partitioning is one of the biggest challenges in computer-aided design for VLSI circuits (very large-scale integrated circuits). This work address the min-cut balanced circuit partitioning problem- dividing the graph that models the circuit into almost equal sized k sub-graphs while minimizing the number of edges cut i.e. minimizing the number of edges connecting the sub-graphs. The problem may be formulated as a combinatorial optimization problem. Experimental studies in the literature have shown the problem to be NP-hard and thus it is important to design an efficient heuristic algorithm to solve it. The approach proposed in this study is a parallel implementation of a genetic algorithm, namely an island model. The information exchange between the evolving subpopulations is modeled using a fuzzy controller, which determines an optimal balance between exploration and exploitation of the solution space. The results of simulations show that the proposed algorithm outperforms the standard sequential genetic algorithm both in terms of solution quality and convergence speed. As a direction for future study, this research can be further extended to incorporate local search operators which should include problem-specific knowledge. In addition, the adaptive configuration of mutation and crossover rates is another guidance for future research.

A test planting of 2-0 and 3-0 Douglas-fir trees on a steep south slope.

Treesearch

Carl M. Bernsten

1958-01-01

Regeneration of clear-cut areas is a high-priority problem facing forest managers in the Douglas-fir region. One of the most critical phases of this problem is the establishment of new stands on south-slope sites, where conditions are unfavorable for regeneration.

The Lily-White University Presses.

ERIC Educational Resources Information Center

Shin, Annys

1996-01-01

Argues that the university presses are immune from racial change and discusses the problem of using location as an argument for not being able to lure blacks into university publishing. Howard University Press is used to illustrate the problem of budget cutting and the ability to boost black recruitment efforts or establish a united black press…

Graph cuts with invariant object-interaction priors: application to intervertebral disc segmentation.

PubMed

Ben Ayed, Ismail; Punithakumar, Kumaradevan; Garvin, Gregory; Romano, Walter; Li, Shuo

2011-01-01

This study investigates novel object-interaction priors for graph cut image segmentation with application to intervertebral disc delineation in magnetic resonance (MR) lumbar spine images. The algorithm optimizes an original cost function which constrains the solution with learned prior knowledge about the geometric interactions between different objects in the image. Based on a global measure of similarity between distributions, the proposed priors are intrinsically invariant with respect to translation and rotation. We further introduce a scale variable from which we derive an original fixed-point equation (FPE), thereby achieving scale-invariance with only few fast computations. The proposed priors relax the need of costly pose estimation (or registration) procedures and large training sets (we used a single subject for training), and can tolerate shape deformations, unlike template-based priors. Our formulation leads to an NP-hard problem which does not afford a form directly amenable to graph cut optimization. We proceeded to a relaxation of the problem via an auxiliary function, thereby obtaining a nearly real-time solution with few graph cuts. Quantitative evaluations over 60 intervertebral discs acquired from 10 subjects demonstrated that the proposed algorithm yields a high correlation with independent manual segmentations by an expert. We further demonstrate experimentally the invariance of the proposed geometric attributes. This supports the fact that a single subject is sufficient for training our algorithm, and confirms the relevance of the proposed priors to disc segmentation.

Scattering amplitudes from multivariate polynomial division

NASA Astrophysics Data System (ADS)

Mastrolia, Pierpaolo; Mirabella, Edoardo; Ossola, Giovanni; Peraro, Tiziano

2012-11-01

We show that the evaluation of scattering amplitudes can be formulated as a problem of multivariate polynomial division, with the components of the integration-momenta as indeterminates. We present a recurrence relation which, independently of the number of loops, leads to the multi-particle pole decomposition of the integrands of the scattering amplitudes. The recursive algorithm is based on the weak Nullstellensatz theorem and on the division modulo the Gröbner basis associated to all possible multi-particle cuts. We apply it to dimensionally regulated one-loop amplitudes, recovering the well-known integrand-decomposition formula. Finally, we focus on the maximum-cut, defined as a system of on-shell conditions constraining the components of all the integration-momenta. By means of the Finiteness Theorem and of the Shape Lemma, we prove that the residue at the maximum-cut is parametrized by a number of coefficients equal to the number of solutions of the cut itself.

Optimized Waterspace Management and Scheduling Using Mixed-Integer Linear Programming

DTIC Science & Technology

2016-01-01

Complete [30]. Proposition 4.1 satisfies the first criterion. For the second criterion, we will use the Traveling Salesman Problem (TSP), which has been...A branch and cut algorithm for the symmetric generalized traveling salesman problem , Operations Research 45 (1997) 378–394. [33] J. Silberholz, B...Golden, The generalized traveling salesman problem : A new genetic algorithm ap- proach, Extended Horizons: Advances in Computing, Optimization, and

[Impact of the crisis on the relationship between housing and health. Policies for good practice to reduce inequalities in health related to housing conditions].

PubMed

Novoa, Ana M; Bosch, Jordi; Díaz, Fernando; Malmusi, Davide; Darnell, Mercè; Trilla, Carme

2014-06-01

Housing conditions can impact on physical and mental health through 4 interrelated dimensions: 1) the home (the emotional housing conditions), 2) the physical housing conditions, and 3) the physical environment, and 4) the social (community) environment of the neighborhood where the house is located. In Spain, the use of the construction market as an engine for economic growth and the promotion of private property as the main type of housing tenure has led to the use of housing as a speculative good instead of its being considered a first-necessity good. While Spain is the Organisation for Economic Co-operation and Development (OECD) country with the largest housing stock per inhabitant, this stock is highly underutilized, thus excluding the most deprived sector of the population from access to housing. The impact of the current economic crisis on housing has mainly been due to a reduction in household income, which has increased the number of families or persons struggling to cover their housing costs or being evicted. Evidence indicates that this type of problem has a negative impact on health, especially on mental health, but financial problems also make it difficult to meet other basic needs such as eating. There are several instruments to reduce the impact of the economic crisis, such as debt financing or deed of assignment in payment. In the long-term, the creation of a social housing stock should be promoted, as well as rental assistance mechanisms. Copyright © 2013 SESPAS. Published by Elsevier Espana. All rights reserved.

Quantum Entanglement Growth under Random Unitary Dynamics

NASA Astrophysics Data System (ADS)

Nahum, Adam; Ruhman, Jonathan; Vijay, Sagar; Haah, Jeongwan

2017-07-01

Characterizing how entanglement grows with time in a many-body system, for example, after a quantum quench, is a key problem in nonequilibrium quantum physics. We study this problem for the case of random unitary dynamics, representing either Hamiltonian evolution with time-dependent noise or evolution by a random quantum circuit. Our results reveal a universal structure behind noisy entanglement growth, and also provide simple new heuristics for the "entanglement tsunami" in Hamiltonian systems without noise. In 1D, we show that noise causes the entanglement entropy across a cut to grow according to the celebrated Kardar-Parisi-Zhang (KPZ) equation. The mean entanglement grows linearly in time, while fluctuations grow like (time )1/3 and are spatially correlated over a distance ∝(time )2/3. We derive KPZ universal behavior in three complementary ways, by mapping random entanglement growth to (i) a stochastic model of a growing surface, (ii) a "minimal cut" picture, reminiscent of the Ryu-Takayanagi formula in holography, and (iii) a hydrodynamic problem involving the dynamical spreading of operators. We demonstrate KPZ universality in 1D numerically using simulations of random unitary circuits. Importantly, the leading-order time dependence of the entropy is deterministic even in the presence of noise, allowing us to propose a simple coarse grained minimal cut picture for the entanglement growth of generic Hamiltonians, even without noise, in arbitrary dimensionality. We clarify the meaning of the "velocity" of entanglement growth in the 1D entanglement tsunami. We show that in higher dimensions, noisy entanglement evolution maps to the well-studied problem of pinning of a membrane or domain wall by disorder.

On the topological properties of the cross-shareholding networks of listed companies in China: Taking shareholders’ cross-shareholding relationships into account

NASA Astrophysics Data System (ADS)

Li, Huajiao; An, Haizhong; Gao, Xiangyun; Huang, Jiachen; Xu, Qun

2014-07-01

Shareholders are the owners of listed companies, and their relationships can directly affect the structure of the stock market. In this paper, we analyze the topological properties and evolution of the cross-shareholding networks of listed companies in the past 5 years in China from 2007 to 2011, an infrequently considered topic, by taking shareholders' cross-shareholding relationships into account. This analysis arrives at a deeper insight into the inner characteristics of China's stock market. We find that the cross-shareholding networks of listed companies with shareholders' cross-shareholding relationships display statistical features that reveal the stock market's complex relationships more precisely. In particular, the results show that when the shareholders' cross-shareholding relationships are considered, first, the In-degree and Out-degree of the cross-shareholding networks follow power-law distribution and the R2 of the linear regression analysis of the cumulative degree distribution is relatively higher; second, the modularity of the communities is larger; finally, both the number of members of top-ranked communities and the number of communities that have a large number of members are larger than those of which only considering the relationships between shareholders and listed companies are taken into account. Such cross-shareholding networks analysis taking shareholders' cross-shareholding relations into account would be a helpful tool for supervisory departments and for stock market researchers to grasp the inner cross-shareholding relationships of listed companies in China, and it will be also helpful for the further researches about the "agent problems" in the stock markets from a whole point of view.

Traveling salesman problems with PageRank Distance on complex networks reveal community structure

NASA Astrophysics Data System (ADS)

Jiang, Zhongzhou; Liu, Jing; Wang, Shuai

2016-12-01

In this paper, we propose a new algorithm for community detection problems (CDPs) based on traveling salesman problems (TSPs), labeled as TSP-CDA. Since TSPs need to find a tour with minimum cost, cities close to each other are usually clustered in the tour. This inspired us to model CDPs as TSPs by taking each vertex as a city. Then, in the final tour, the vertices in the same community tend to cluster together, and the community structure can be obtained by cutting the tour into a couple of paths. There are two challenges. The first is to define a suitable distance between each pair of vertices which can reflect the probability that they belong to the same community. The second is to design a suitable strategy to cut the final tour into paths which can form communities. In TSP-CDA, we deal with these two challenges by defining a PageRank Distance and an automatic threshold-based cutting strategy. The PageRank Distance is designed with the intrinsic properties of CDPs in mind, and can be calculated efficiently. In the experiments, benchmark networks with 1000-10,000 nodes and varying structures are used to test the performance of TSP-CDA. A comparison is also made between TSP-CDA and two well-established community detection algorithms. The results show that TSP-CDA can find accurate community structure efficiently and outperforms the two existing algorithms.

Adventitious rooting declines with the vegetative to reproductive switch and involves a changed auxin homeostasis.

PubMed

Rasmussen, Amanda; Hosseini, Seyed Abdollah; Hajirezaei, Mohammed-Reza; Druege, Uwe; Geelen, Danny

2015-03-01

Adventitious rooting, whereby roots form from non-root tissues, is critical to the forestry and horticultural industries that depend on propagating plants from cuttings. A major problem is that age of the tissue affects the ability of the cutting to form adventitious roots. Here, a model system has been developed using Pisum sativum to differentiate between different interpretations of ageing. It is shown that the decline in adventitious rooting is linked to the ontogenetic switch from vegetative to floral and is mainly attributed to the cutting base. Using rms mutants it is demonstrated that the decline is not a result of increased strigolactones inhibiting adventitious root formation. Monitoring endogenous levels of a range of other hormones including a range of cytokinins in the rooting zone revealed that a peak in jasmonic acid is delayed in cuttings from floral plants. Additionally, there is an early peak in indole-3-acetic acid levels 6h post excision in cuttings from vegetative plants, which is absent in cuttings from floral plants. These results were confirmed using DR5:GUS expression. Exogenous supplementation of young cuttings with either jasmonic acid or indole-3-acetic acid promoted adventitious rooting, but neither of these hormones was able to promote adventitious rooting in mature cuttings. DR5:GUS expression was observed to increase in juvenile cuttings with increasing auxin treatment but not in the mature cuttings. Therefore, it seems the vegetative to floral ontogenetic switch involves an alteration in the tissue's auxin homeostasis that significantly reduces the indole-3-acetic acid pool and ultimately results in a decline in adventitious root formation. © The Author 2014. Published by Oxford University Press on behalf of the Society for Experimental Biology.

Adventitious rooting declines with the vegetative to reproductive switch and involves a changed auxin homeostasis

PubMed Central

Rasmussen, Amanda; Hosseini, Seyed Abdollah; Hajirezaei, Mohammed-Reza; Druege, Uwe; Geelen, Danny

2015-01-01

Adventitious rooting, whereby roots form from non-root tissues, is critical to the forestry and horticultural industries that depend on propagating plants from cuttings. A major problem is that age of the tissue affects the ability of the cutting to form adventitious roots. Here, a model system has been developed using Pisum sativum to differentiate between different interpretations of ageing. It is shown that the decline in adventitious rooting is linked to the ontogenetic switch from vegetative to floral and is mainly attributed to the cutting base. Using rms mutants it is demonstrated that the decline is not a result of increased strigolactones inhibiting adventitious root formation. Monitoring endogenous levels of a range of other hormones including a range of cytokinins in the rooting zone revealed that a peak in jasmonic acid is delayed in cuttings from floral plants. Additionally, there is an early peak in indole-3-acetic acid levels 6h post excision in cuttings from vegetative plants, which is absent in cuttings from floral plants. These results were confirmed using DR5:GUS expression. Exogenous supplementation of young cuttings with either jasmonic acid or indole-3-acetic acid promoted adventitious rooting, but neither of these hormones was able to promote adventitious rooting in mature cuttings. DR5:GUS expression was observed to increase in juvenile cuttings with increasing auxin treatment but not in the mature cuttings. Therefore, it seems the vegetative to floral ontogenetic switch involves an alteration in the tissue’s auxin homeostasis that significantly reduces the indole-3-acetic acid pool and ultimately results in a decline in adventitious root formation. PMID:25540438

12 CFR 225.127 - Investment in corporations or projects designed primarily to promote community welfare.

Code of Federal Regulations, 2010 CFR

2010-01-01

... social problems. Although the interpretation primarily focuses on low- and moderate-income housing, it is... social ills. Section 225.25(b)(6) is intended to provide an opportunity for them to assume such a role... percent of the bank holding company's total consolidated capital stock and surplus, without additional...

The Subschools/Small Schools Movement--Taking Stock.

ERIC Educational Resources Information Center

Raywid, Mary Anne

Today, the division of large schools into subschools or subunits is often recommended as the answer to a number of problems in education. This paper examines the several forms of school-downsizing efforts and the somewhat diverse purposes for which they are being established. The data come from a review of literature and an evaluation of 22…

Time-changed geometric fractional Brownian motion and option pricing with transaction costs

NASA Astrophysics Data System (ADS)

Gu, Hui; Liang, Jin-Rong; Zhang, Yun-Xiu

2012-08-01

This paper deals with the problem of discrete time option pricing by a fractional subdiffusive Black-Scholes model. The price of the underlying stock follows a time-changed geometric fractional Brownian motion. By a mean self-financing delta-hedging argument, the pricing formula for the European call option in discrete time setting is obtained.

Recirculating systems for Atlantic salmon (Salmo salar) at the USDA ARS National Cold Water Marine Aquaculture Center (Franklin, Maine

USDA-ARS?s Scientific Manuscript database

The Northeastern U.S has the ideal location and unique opportunity to be a leader in cold-water marine finfish aquaculture. However, problems and regulations on environmental issues, mandatory stocking of 100 percent native North American salmon, and disease have impacted economic viability of the U...

A method for inventorying planting stock in forest nurseries

Treesearch

R.A. Chapman

1939-01-01

Each year forest nurserymen are faced with the problem of estimating the number of seedlings they can ship from their nurseries. Since errors in the estimates may seriously affect the planting programs, during the past 2 years the Southern Forest Experiment Station has been attempting to improve nursery-inventory procedure. The inventory method that appears most...

Challenges and Problems for Research in the Field of Statewide Exams. A Stock Taking of Differing Procedures and Standardization Levels

ERIC Educational Resources Information Center

Klein, Esther Dominique; van Ackeren, Isabell

2011-01-01

Statewide exit examinations play an important role in discussions on school effectiveness. Referring to educational governance concepts, this paper presumes a relation between varying organizational structures of statewide examinations across states, and heterogeneous effects on school actors. It is assumed that their ability to affect work in…

Grade Distribution and Drying Degrade of Sweetgum and Yellow-poplar Structural Lumber

Treesearch

Timothy D. Faust

1990-01-01

The fact that the supply of southern pine timber is changing to include more lower quality plantation stock may provide incentive for utilizing lower density hardwoods for structural lumber. Yellow-poplar and sweetgum are potential substitutes for southern pine. A major problem in utilizing soft hardwoods for structural lumber is the difficulties associated with drying...

Gender in Schools and Culture: Taking Stock of Education in Italy

ERIC Educational Resources Information Center

Biemmi, Irene

2015-01-01

When politicians discuss Italy's position in terms of achieving equality between men and women, the school environment is rarely called into question or mentioned. This is despite the fact that gender inequality remains a prominent feature of the Italian education system. The reason for this failure to perceive the problem, and the consequent lack…

A Practitioner Review of the Great Leap in Mainland China's Tertiary VET

ERIC Educational Resources Information Center

Ren, Junqing; Gao, Xuesong; Su, Zhigang

2006-01-01

In this paper, we attempt to give an insider's perspective on mainland China's tertiary vocational education/training (VET) through reflecting upon its recent history, the social and economic conditions for its current growth and survival, and the challenges facing its future. We will take stock of four major problems that have been hindering the…

Thermostatic Radiator Valve Evaluation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dentz, Jordan; Ansanelli, Eric

2015-01-01

A large stock of multifamily buildings in the Northeast and Midwest are heated by steam distribution systems. Losses from these systems are typically high and a significant number of apartments are overheated much of the time. Thermostatically controlled radiator valves (TRVs) are one potential strategy to combat this problem, but have not been widely accepted by the residential retrofit market.

Distance Education Policy and Public Awareness in Cambodia, Laos, and Viet Nam

ERIC Educational Resources Information Center

Vuth, Doung; Than, Chhuon Chan; Phanousith, Somphone; Phissamay, Phonpasit; Tai, Tran Thi

2007-01-01

The current project brings together academic and governmental specialists from Cambodia, Laos, and Viet Nam (CLV), in a collaborative study of the prospects for distance education (DE) in those countries. The study's overall objectives are to: (1) survey and take stock of existing educational scenarios and problems in CLV; (2) document the…

Predicting yields from Appalachian red oak logs and lumber

Treesearch

Daniel E. Dunmire

1971-01-01

One utilization problem is in pinpointing how to efficiently and effectively recover usable parts from logs, bolts, and lumber. Yields, which are output divided by input, provide a key to managers who make processing decisions. Research results are applied to indicate yields of graded lumber and dimension stock from graded Appalachian red oak (group) logs. How to...

Chemical water shutoff profile research status and development trends

NASA Astrophysics Data System (ADS)

Xu, L. T.

2017-08-01

Excess water production is now a common problem encountered in almost every water flooding mature oilfield. The exploitation of oil field is faced with great challenge because of the decrease of oil field production. For the development of high water cut rare the status quo chemical water shutoff profile control technology is an important solution to solve this problem. Oilfield chemical water shutoff has important application prospects. This paper analyzes the water shutoff profile control and water shutoff profile control agent currently oilfield applications, moreover the use and development of blocking agent profile technology is to improve reservoir recovery and propose solutions. With the constant increase in water cut, profile technology should be simple, efficient, practical and profile control agent of development should be economic, environmental, and long period

Usefulness of cutting balloon angioplasty for the treatment of congenital heart defects.

PubMed

Kusa, Jacek; Mazurak, Magdalena; Skierska, Agnieszka; Szydlowski, Leslaw; Czesniewicz, Pawel; Manka, Lukasz

2018-01-01

Patients with complex congenital heart defects may have different hemodynamic prob-lems which require a variety of interventional procedures including angioplasty which involves using high-pressure balloons. After failure of conventional balloon angioplasty, cutting balloon angioplasty is the next treatment option available. The purpose of this study was to evaluate the safety and efficacy of cutting balloon angioplasty in children with different types of congenital heart defects. Cutting balloon angioplasty was performed in 28 children with different congenital heart defects. The indication for cutting balloon angioplasty was: pulmonary artery stenosis in 17 patients, creating or dilatation of interatrial communication in 10 patients, and stenosis of left subclavian artery in 1 patient. In the pulmonary arteries group there was a significant decrease in systolic blood pressure (SBP) in the proximal part of the artery from the average 74.33 ± 20.4 mm Hg to 55 ± 16.7 mm Hg (p < 0.001). Distal to the stenosis there was an increase in SBP from 19.8 ± 3.82 mm Hg to 30.3 ± ± 13.3 mm Hg (p = 0.04). This result remained constant in the follow-up. In atrial septal defect/fenestra-tion group, cutting balloon angioplasty was performed after an unsuccessful classic Rashkind procedure. After cutting balloon angioplasty there was a significant widening of the interatrial communication. Cutting balloon angioplasty is a feasible and effective treatment option in different con-genital heart defects.

Evolutionary Bi-objective Optimization for Bulldozer and Its Blade in Soil Cutting

NASA Astrophysics Data System (ADS)

Sharma, Deepak; Barakat, Nada

2018-02-01

An evolutionary optimization approach is adopted in this paper for simultaneously achieving the economic and productive soil cutting. The economic aspect is defined by minimizing the power requirement from the bulldozer, and the soil cutting is made productive by minimizing the time of soil cutting. For determining the power requirement, two force models are adopted from the literature to quantify the cutting force on the blade. Three domain-specific constraints are also proposed, which are limiting the power from the bulldozer, limiting the maximum force on the bulldozer blade and achieving the desired production rate. The bi-objective optimization problem is solved using five benchmark multi-objective evolutionary algorithms and one classical optimization technique using the ɛ-constraint method. The Pareto-optimal solutions are obtained with the knee-region. Further, the post-optimal analysis is performed on the obtained solutions to decipher relationships among the objectives and decision variables. Such relationships are later used for making guidelines for selecting the optimal set of input parameters. The obtained results are then compared with the experiment results from the literature that show a close agreement among them.

Optimization of Straight Cylindrical Turning Using Artificial Bee Colony (ABC) Algorithm

NASA Astrophysics Data System (ADS)

Prasanth, Rajanampalli Seshasai Srinivasa; Hans Raj, Kandikonda

2017-04-01

Artificial bee colony (ABC) algorithm, that mimics the intelligent foraging behavior of honey bees, is increasingly gaining acceptance in the field of process optimization, as it is capable of handling nonlinearity, complexity and uncertainty. Straight cylindrical turning is a complex and nonlinear machining process which involves the selection of appropriate cutting parameters that affect the quality of the workpiece. This paper presents the estimation of optimal cutting parameters of the straight cylindrical turning process using the ABC algorithm. The ABC algorithm is first tested on four benchmark problems of numerical optimization and its performance is compared with genetic algorithm (GA) and ant colony optimization (ACO) algorithm. Results indicate that, the rate of convergence of ABC algorithm is better than GA and ACO. Then, the ABC algorithm is used to predict optimal cutting parameters such as cutting speed, feed rate, depth of cut and tool nose radius to achieve good surface finish. Results indicate that, the ABC algorithm estimated a comparable surface finish when compared with real coded genetic algorithm and differential evolution algorithm.

Mathematical simulation and optimization of cutting mode in turning of workpieces made of nickel-based heat-resistant alloy

NASA Astrophysics Data System (ADS)

Bogoljubova, M. N.; Afonasov, A. I.; Kozlov, B. N.; Shavdurov, D. E.

2018-05-01

A predictive simulation technique of optimal cutting modes in the turning of workpieces made of nickel-based heat-resistant alloys, different from the well-known ones, is proposed. The impact of various factors on the cutting process with the purpose of determining optimal parameters of machining in concordance with certain effectiveness criteria is analyzed in the paper. A mathematical model of optimization, algorithms and computer programmes, visual graphical forms reflecting dependences of the effectiveness criteria – productivity, net cost, and tool life on parameters of the technological process - have been worked out. A nonlinear model for multidimensional functions, “solution of the equation with multiple unknowns”, “a coordinate descent method” and heuristic algorithms are accepted to solve the problem of optimization of cutting mode parameters. Research shows that in machining of workpieces made from heat-resistant alloy AISI N07263, the highest possible productivity will be achieved with the following parameters: cutting speed v = 22.1 m/min., feed rate s=0.26 mm/rev; tool life T = 18 min.; net cost – 2.45 per hour.

Easy and Inexpensive Technique for Removal of Round Headed, Jammed Locking Screws in Distal Tibial Interlocking Plate.

PubMed

Singh, Harpreet; Sharma, Rohit; Gupta, Sachin; Singh, Narinderjit; Singh, Simarpreet

2015-01-01

The advent of locking plates has brought new problems in implant removal. Difficulty in removing screws from a locking plate is well-known. These difficulties include cold welding between the screw head and locking screw hole, stripping of the recess of the screw head for the screwdriver, and cross-threading between threads in the screw head and screw hole. However, there are cases in which removal is difficult. We describe a new technique for removing a round headed, jammed locking screws from a locking plate. 55 years old male patient received a locking distal tibial plate along with distal fibular plate 3years back from UAE. Now patient came with complaint of non-healing ulcer over medial aspect of lower 1/3rd of right leg from past 1 year. Non operative management did not improve the symptoms. The patient consented to implant removal, with the express understanding that implant removal might be impossible because already one failed attempt had been performed at some other hospital six months back. We then decided to proceed with the new technique. The rest of the proximal screws were removed using a technique not previously described. We used stainless steel metal cutting blades that are used to cut door locks or pad locks to cut the remaining stripped headed screws. This technique is very quick, easy to perform and inexpensive because the metal cutting blades which are used to cut the screws are very cheap. Yet it is very effective technique to remove the stripped headed or jammed locking screws. It is also very less destructive because of very less heat production during the procedure there is no problem of thermal necrosis to the bone or the surrounding soft tissue.

Rough-Cut Capacity Planning in Multimodal Freight Transportation Networks

DTIC Science & Technology

2012-09-30

transportation system to losses in es - tablished routes or assets? That is, what is the nature and length of system capability degradation due to these...Multimodal Rough-Cut Capacity Planning is mod- eled using the Resource Constrained Shortest Path Problem. We demonstrate how this approach supports...of non-zero ele - ments and the 0 entries depict appropriately dimensioned blocks of 0 entries.∣∣∣∣∑ k Ck ∣∣∣∣ Σ 0 0 0 0 Σ 0 0

Proficiency Standards and Cut-Scores for Language Proficiency Tests.

ERIC Educational Resources Information Center

Moy, Raymond H.

The problem of standard setting on language proficiency tests is often approached by the use of norms derived from the group being tested, a process commonly known as "grading on the curve." One particular problem with this ad hoc method of standard setting is that it will usually result in a fluctuating standard dependent on the particular group…

Supplemental treatments to aid planted Douglas-fir in dense bracken fern

Treesearch

Edward J. Dimock

1964-01-01

Why do some forest lands restock quickly and well after timber cutting but others do not? Answers have been slow in coming--partl y because of empiricism in research, partly because of the problem's general complexity, A part of the general problem concerns the poor survival of, planted Douglas-fir (Pseudotsuga menziesii var, menziesii) on...

Minimal Solutions to the Box Problem

ERIC Educational Resources Information Center

Chuang, Jer-Chin

2009-01-01

The "box problem" from introductory calculus seeks to maximize the volume of a tray formed by folding a strictly rectangular sheet from which identical squares have been cut from each corner. In posing such questions, one would like to choose integral side-lengths for the sheet so that the excised squares have rational or integral side-length.…

A Bird and Bee Problem in House Siding

Treesearch

Louis F. Wilson; Henry A. Huber

1976-01-01

Plywood house siding made to simulate reverse board-and-batten design is sometimes attacked by woodpeckers because leaf-cutting bees, their prey, make nests in holes in the plywood core. The problem can be prevented by plugging the holes before nesting occurs. If nesting does occur, the nest should be destroyed and then the holes plugged.

Performance of Ti-multilayer coated tool during machining of MDN431 alloyed steel

NASA Astrophysics Data System (ADS)

Badiger, Pradeep V.; Desai, Vijay; Ramesh, M. R.

2018-04-01

Turbine forgings and other components are required to be high resistance to corrosion and oxidation because which they are highly alloyed with Ni and Cr. Midhani manufactures one of such material MDN431. It's a hard-to-machine steel with high hardness and strength. PVD coated insert provide an answer to problem with its state of art technique on the WC tool. Machinability studies is carried out on MDN431 steel using uncoated and Ti-multilayer coated WC tool insert using Taguchi optimisation technique. During the present investigation, speed (398-625rpm), feed (0.093-0.175mm/rev), and depth of cut (0.2-0.4mm) varied according to Taguchi L9 orthogonal array, subsequently cutting forces and surface roughness (Ra) were measured. Optimizations of the obtained results are done using Taguchi technique for cutting forces and surface roughness. Using Taguchi technique linear fit model regression analysis carried out for the combination of each input variable. Experimented results are compared and found the developed model is adequate which supported by proof trials. Speed, feed and depth of cut are linearly dependent on the cutting force and surface roughness for uncoated insert whereas Speed and depth of cut feed is inversely dependent in coated insert for both cutting force and surface roughness. Machined surface for coated and uncoated inserts during machining of MDN431 is studied using optical profilometer.

A study of tail tip necrosis in young fattening bulls on slatted floors.

PubMed

Madsen, E B; Nielsen, K

1985-01-01

A questionnaire sent to 78 producers revealed that tail tip necrosis was seen only in units with fattening bulls housed on slatted floors. Out of 43 such units, 20 (46.5 per cent) reported that tail tip necrosis was a herd problem. All 43 herds were visited, owners were interviewed and housing and management data recorded. It is concluded that tail tip necrosis is a multifactorial disease. The initial lesion is caused by tramping, but the following factors are essential in the development and severity of the disease, i) slatted concrete floors, ii) close confinement, iii) hot season and iv) body weight above 200 kg. The stocking density (expressed as kg bodyweight per square meter pen) was significantly higher in problem herds (210 kg/m2) than in control herds (165 kg/m2). There was a close relationship between high environmental temperature and tail tip necroses. The majority of incidents occurred during the warm season (May through September), very few cases were seen during the colder months. The general morbidity and mortality rates were significantly higher in problem herds than in control herds. Microbiology of affected tails revealed mixed infections in most cases, with Corynebacterium pyogenes and Bacteroides melaninogenicus as the most frequently isolated organisms. Principles of treatment and prevention are discussed. There is evidence to assume that a 10-20 per cent reduction in stocking density could be an efficient prophylactic measure.

Lubricity of well-characterized jet and broad-cut fuels by ball-on-cylinder machine

NASA Technical Reports Server (NTRS)

Prok, G. M.; Kim, W. S.

1984-01-01

A ball-on-cylinder machine (BOCM) was used to measure the lubricity of fuels. The fuels tested were well-characterized fuels available from other programs at the NASA Lewis Research Center plus some in-house mildly hydroprocessed shale fuels from other programs included Jet-A, ERBS fuel, ERBS blends, and blend stock. The BOCM tests were made before and after clay treatment of some of these fuels with both humidified air and dry nitrogen as the preconditioning and cover gas. As expected, clay treatment always reduced fuel lubricity. Using nitrogen preconditioning and cover gas always resulted in a smaller wear scar diameter than when humidified air was used. Also observed was an indication of lower lubricity with lower boiling range fuels and lower aromatic fuels. Gas chromatographic analysis indicted changes in BOCM-stressed fuels.

Micropropagation and organogenesis of Anthurium andreanum Lind cv Rubrun.

PubMed

Maira, Oropeza; Alexander, Mejías; Vargas, Teresa Edith

2010-01-01

Tissue culture techniques are routinely used for mass propagation and the establishment of disease free stock material. Virtually all pot type Anthuriums available in the market today are produced by tissue culture. In this chapter, we describe an efficient protocol to obtain Anthurium andreanum cv Rubrun vitro plants through micropropagation and organogenesis. Seeds from plant spadixes were germinated on MS medium supplemented with 0.5 mg/L BA. Micro-cuttings from in vitro germinated seedlings were subcultured on MS medium containing 2 mg/L BA and 0.5 mg/L NAA. Four-week-old in vitro plants obtained from microcuttings, showed callus proliferation at the stem base. The development of shoots and plantlets was observed from callus tissue. We also describe a detailed method for the histological analysis of callus tissue and a vitro plants acclimatization protocol.