Swipe In, Tap Out: Advancing Student Entrepreneurship in the CIS Sandbox

ERIC Educational Resources Information Center

Charlebois, Conner; Hentschel, Nicholas; Frydenberg, Mark

2014-01-01

The Computer Information Systems Learning and Technology Sandbox (CIS Sandbox) opened as a collaborative learning lab during the fall 2011 semester at a New England business university. The facility employs 24 student workers, who, in addition to providing core tutoring services, are encouraged to explore new technologies and take on special…

Teaching Engineering Ethics to PhD Students: A Berkeley-Delft Initiative : Commentary on "Ethics Across the Curriculum: Prospects for Broader (and Deeper) Teaching and Learning in Research and Engineering Ethics".

PubMed

Taebi, Behnam; Kastenberg, William E

2016-07-13

A joint effort by the University of California at Berkeley and Delft University of Technology to develop a graduate engineering ethics course for PhD students encountered two types of challenges: academic and institutional. Academically, long-term collaborative research efforts between engineering and philosophy faculty members might be needed before successful engineering ethics courses can be initiated; the teaching of ethics to engineering graduate students and collaborative research need to go hand-in-hand. Institutionally, both bottom-up approaches at the level of the faculty and as a joint research and teaching effort, and top-down approaches that include recognition by a University's administration and the top level of education management, are needed for successful and sustainable efforts to teach engineering ethics.

Evaluation of the Sustainable Development Graduation Track at Delft University of Technology

ERIC Educational Resources Information Center

De Werk, G.; Kamp, L. M.

2008-01-01

This paper evaluates the sustainable development graduation track at TU Delft. This track can be followed by all students of TU Delft. It consists of an interdisciplinary colloquium "Technology in Sustainable Development", 300 h of self-chosen courses on sustainable development and a graduation project in which sustainable development is…

A first computational framework for integrated hydrologic-hydrodynamic inundation modelling

NASA Astrophysics Data System (ADS)

Hoch, Jannis; Baart, Fedor; Neal, Jeffrey; van Beek, Rens; Winsemius, Hessel; Bates, Paul; Bierkens, Marc

2017-04-01

To provide detailed flood hazard and risk estimates for current and future conditions, advanced modelling approaches are required. Currently, many approaches are however built upon specific hydrologic or hydrodynamic model routines. By applying these routines in stand-alone mode important processes cannot accurately be described. For instance, global hydrologic models (GHM) run at coarse spatial resolution which does not identify locally relevant flood hazard information. Moreover, hydrologic models generally focus on correct computations of water balances, but employ less sophisticated routing schemes such as the kinematic wave approximation. Hydrodynamic models, on the other side, excel in the computations of open water flow dynamics, but are highly dependent on specific runoff or observed discharge for their input. In most cases hydrodynamic models are forced by applying discharge at the boundaries and thus cannot account for water sources within the model domain. Thus, discharge and inundation dynamics at reaches not fed by upstream boundaries cannot be modelled. In a recent study, Hoch et al. (HESS, 2017) coupled the GHM PCR-GLOBWB with the hydrodynamic model Delft3D Flexible Mesh. A core element of this study was that both models were connected on a cell-by-cell basis which allows for direct hydrologic forcing within the hydrodynamic model domain. The means for such model coupling is the Basic Model Interface (BMI) which provides a set of functions to directly access model variables. Model results showed that discharge simulations can profit from model coupling as their accuracy is higher compared to stand-alone runs. Model results of a coupled simulation clearly depend on the quality of the individual models. Depending on purpose, location or simply the models at hand, it would be worthwhile to allow a wider range of models to be coupled. As a first step, we present a framework which allows coupling of PCR-GLOBWB to both Delft3D Flexible Mesh and LISFLOOD-FP. The coupling framework consists of a main script and a set of functions performing the actual model coupling as well as data processing. All that is required therefore are model schematizations of the models involved for the domain of interest. It is noteworthy that no adaptions to already existing schematizations have to be made. Within the framework, it is possible to distribute input volume from PCR-GLOBWB over the 2D hydrodynamic grid ("2D option"), or if available, directly into the 1D channels ("1D option"). Besides, it is possible to input the water volumes into the hydrodynamic models either as fluxes or states. With PCR-GLOBWB being a global model, it is possible to apply the coupling scheme anywhere, which reduces the dependency of observation data for discharge boundaries. Reducing this dependency is of particular benefit for areas where only a limited number of accurate measurements are available. First results of applying the coupling framework show that differences between both hydrodynamic models are mainly apparent in the timing of peak discharge when using the 1D option. Regarding inundation extent, applying LISFLOOD-FP with a regular grid outperforms the flexible mesh of Delft3D for those areas where a coarser spatial resolution is used in the flexible mesh. When using the 2D option, however, using Delft3D Flexible Mesh is more robust than LISFLOOD-FP due to the differences in the solver used in the models. With Delft3D Flexible Mesh solving the full Saint-Vernant equations, and LISFLOOD-FP solving the local inertial wave approximation which lacks the convective acceleration term, the framework hence allows for choosing the hydrodynamic parts based on the local characteristics of a chosen study area.

Using Delft3D to Simulate Current Energy Conversion

NASA Astrophysics Data System (ADS)

James, S. C.; Chartrand, C.; Roberts, J.

2015-12-01

As public concern with renewable energy increases, current energy conversion (CEC) technology is being developed to optimize energy output and minimize environmental impact. CEC turbines generate energy from tidal and current systems and create wakes that interact with turbines located downstream of a device. The placement of devices can greatly influence power generation and structural reliability. CECs can also alter the ecosystem process surrounding the turbines, such as flow regimes, sediment dynamics, and water quality. Software is needed to investigate specific CEC sites to simulate power generation and hydrodynamic responses of a flow through a CEC turbine array. This work validates Delft3D against several flume experiments by simulating the power generation and hydrodynamic response of flow through a turbine or actuator disc(s). Model parameters are then calibrated against these data sets to reproduce momentum removal and wake recovery data with 3-D flow simulations. Simulated wake profiles and turbulence intensities compare favorably to the experimental data and demonstrate the utility and accuracy of a fast-running tool for future siting and analysis of CEC arrays in complex domains.

Grubbs's Cross Metathesis of Eugenol with cis-2-butene-1, 4-diol to Make a Natural Product: An Organometallic Experiment for the Undergraduate Lab

ERIC Educational Resources Information Center

Taber, Douglass F.; Frankowski, Kevin J.

2006-01-01

A modified experimental procedure for the one-step synthesis that is suitable for the undergraduate organic lab is presented. In the course of work towards the more routine use of air-sensitive organometallic complexes such as the Grubb's catalyst, the natural product (E)-4-(4-hydroxy-3-methoxyphenyl) but-2-en-ol, 4, was synthesized.

DELFT3D-Modelling of Hydrodynamic and Water Quality Processes in San Diego Bight

DTIC Science & Technology

2009-01-01

Terrill (SIO Scripps), Dr. Lyle Hibler ( PNL ) and Mark Moline (CalPoly) who are funded separately. LONG-TERM GOALS The long-term goal of this...cooperation with Dr. Eric Terrill (SIO Scripps), Dr. Lyle Hibler ( PNL ) and Mark Moline (CalPoly) who are funded separately.

Strengthening US DoD Cyber Security with the Vulnerability Market

DTIC Science & Technology

2013-06-01

is with their constant assurance that I find strength. I would also like to acknowledge my cyber- colleagues, Maj Ronald “Rusty” Clark, Maj Vanessa ...Michel J.G. van Eeten, Delft University of Technology; Michael Levi, Cardiff University; Tyler Moore, Southern Methodist University; and Stefan Savage

Sensitivity studies of the new Coastal Surge and Inundation Prediction System

NASA Astrophysics Data System (ADS)

Condon, A. J.; Veeramony, J.

2012-12-01

This paper details the sensitivity studies involved in the validation of a coastal storm surge and inundation prediction system for operational use by the United States Navy. The system consists of the Delft3D-FLOW model coupled with the Delft3D-WAVE model. This dynamically coupled system will replace the current operational system, PC-Tides which does not include waves or other global ocean circulation. The Delft3D modeling system uses multiple nests to capture large, basin-scale circulation as well as coastal circulation and tightly couples waves and circulation at all scales. An additional benefit in using the presented system is that the Delft Dashboard, a graphical user interface product, can be used to simplify the set-up of Delft3D features such as the grid, elevation data, boundary forcing, and nesting. In this way less man-hours and training will be needed to perform inundation forecasts. The new coupled system is used to model storm surge and inundation produced by Hurricane Ike (2008) along the Gulf of Mexico coast. Due to the time constraints in an operational forecasting environment, storm simulations must be as streamlined as possible. Many factors such as model resolution, elevation data sets, parametrization of bottom friction, frequency of coupling between hydrodynamic and wave components, and atmospheric forcing among others can influence the run times and results of the simulations. To assess the sensitivity of the modeling system to these various components a "best" simulation was first developed. The best simulation consists of reanalysis atmospheric forcing in the form of Oceanweather wind and pressure fields. Further the wind field is modified by applying a directional land-masking to account for changes in land-roughness in the coastal zone. A number of air-sea drag coefficient formulations were tested to find the best match with observed results. An analysis of sea-level trends for the region reveals a seasonal trend of elevated sea level in the region which is applied throughout the Gulf of Mexico. The hydrodynamic model is run in 2D depth averaged mode with a spatially varying Manning's N coefficient based on land cover data. Multiple nests are used with resolutions varying between 0.1° and 0.004°. A blended bathymetry and topography dataset from multiple sources is used. Tidal constituents are obtained from the Oregon State University global model of ocean tides based on TOPEX7.2 satellite altimeter data. Simulated water level is compared to data from NOAA National Ocean Service observing stations throughout the region. Simulated inundation is compared to observations by means of Federal Emergency Management Agency High Water Mark (HWM) data. Results from the "best" simulation show very favorable comparison to observations. Simulated peak water levels are generally within 0.25 m and HWMs are well correlated with observations. Once the "best" simulation was established, sensitivity of the system to the wind model, drag coefficient, elevation dataset, initial water level, wave coupling, bottom roughness, and domain resolution was investigated. Each component has an influence on the simulation results, some much more than others. As expected the atmospheric forcing is the key component, however all other factors must be carefully chosen to obtain the best results.

Chemical characterization of organosulfates from the hydroxyl radical-initiated oxidation and ozonolysis of cis-3-hexen-1-ol

NASA Astrophysics Data System (ADS)

Barbosa, Thais S.; Riva, Matthieu; Chen, Yuzhi; da Silva, Cleyton M.; Ameida, Jose Claudino S.; Zhang, Zhenfa; Gold, Avram; Arbilla, Graciela; Bauerfeldt, Glauco F.; Surratt, Jason D.

2017-08-01

Cis-3-hexen-1-ol (cis-HXO) is a green leaf volatile emitted from plants under stress and belongs to an important class of biogenic volatile organic compounds. In this study, we have investigated the potential formation of organosulfates (OSs) from the hydroxyl radical (OH)-initiated oxidation and ozonolysis of cis-HXO using either non-acidified or acidified sulfate seed aerosols under different relative humidity (RH) conditions. For selected ozonolysis experiments, an OH scavenger was utilized. Ultra performance liquid chromatography interfaced to high-resolution quadrupole time-of-flight mass spectrometry with electrospray ionization (UPLC/ESI-HR-Q-TOFMS) was used to characterize cis-HXO-derived secondary organic aerosol (SOA) formation. Chemical characterization of cis-HXO-derived SOA products reveals that OSs were generated in significant quantity from multiphase chemistry of gas-phase oxidation products of cis-HXO. Ambient fine aerosol (PM2.5) samples collected from Rio de Janeiro, Brazil, were also analyzed. Seven cis-HXO-derived OSs identified in the lab study with molecular weights 154, 186, 170, 210, 212, 226 and 270 were also found in the PM2.5 samples collected in Brazil. This study provides direct evidence that the oxidation of cis-HXO by OH and O3 yields biogenic SOA through the formation of polar OSs.

A Two-Step Method to Select Major Surge-Producing Extratropical Cyclones from a 10,000-Year Stochastic Catalog

NASA Astrophysics Data System (ADS)

Keshtpoor, M.; Carnacina, I.; Yablonsky, R. M.

2016-12-01

Extratropical cyclones (ETCs) are the primary driver of storm surge events along the UK and northwest mainland Europe coastlines. In an effort to evaluate the storm surge risk in coastal communities in this region, a stochastic catalog is developed by perturbing the historical storm seeds of European ETCs to account for 10,000 years of possible ETCs. Numerical simulation of the storm surge generated by the full 10,000-year stochastic catalog, however, is computationally expensive and may take several months to complete with available computational resources. A new statistical regression model is developed to select the major surge-generating events from the stochastic ETC catalog. This regression model is based on the maximum storm surge, obtained via numerical simulations using a calibrated version of the Delft3D-FM hydrodynamic model with a relatively coarse mesh, of 1750 historical ETC events that occurred over the past 38 years in Europe. These numerically-simulated surge values were regressed to the local sea level pressure and the U and V components of the wind field at the location of 196 tide gauge stations near the UK and northwest mainland Europe coastal areas. The regression model suggests that storm surge values in the area of interest are highly correlated to the U- and V-component of wind speed, as well as the sea level pressure. Based on these correlations, the regression model was then used to select surge-generating storms from the 10,000-year stochastic catalog. Results suggest that roughly 105,000 events out of 480,000 stochastic storms are surge-generating events and need to be considered for numerical simulation using a hydrodynamic model. The selected stochastic storms were then simulated in Delft3D-FM, and the final refinement of the storm population was performed based on return period analysis of the 1750 historical event simulations at each of the 196 tide gauges in preparation for Delft3D-FM fine mesh simulations.

Sensitivity Analysis of Delft3d Simulations at Duck, NC, USA

NASA Astrophysics Data System (ADS)

Penko, A.; Boggs, S.; Palmsten, M.

2017-12-01

Our objective is to set up and test Delft3D, a high-resolution coupled wave and circulation model, to provide real-time nowcasts of hydrodynamics at Duck, NC, USA. Here, we test the sensitivity of the model to various parameters and boundary conditions. In order to validate the model simulations we compared the results to observational data. Duck, NC was chosen as our test site due to the extensive array of observational oceanographic, bathymetric, and meteorological data collected by the Army Corps of Engineers Field Research Facility (FRF). Observations were recorded with Acoustic Wave and Current meters (AWAC) at 6-m and 11-m depths as well as a 17-m depth Waverider buoy. The model is set up with an outer and inner nested domain. The outer grid extends 12-km in the along-shore and 3.5-km in the cross-shore with a 50-m resolution and a maximum depth of 17-m. Spectral wave measurements from the 17-m Waverider buoy drove Delft3D-WAVE in the outer grid. We compared the results of five outer grid simulations to wave and current observations collected at the FRF. The model simulations are then compared to the wave and current measurements collected at the 6-m and 11-m AWACs. To determine the best parameters and boundary conditions for the model set up at Duck, we calculated the root mean square error (RMSE) between the simulation results and the observations. Several conclusions were made: 1) The addition of astronomic tides have a significant effect on the circulation magnitude and direction, 2) incorporating an updated bathymetry in the bottom boundary condition has a small effect in shallower (<8-m) depths, 3) decreasing the wave bed friction by 50% did not affect the wave predictions and 4) the accuracy of the simulated wave heights improved as wind and wave forcing at the lateral boundaries were included.

Properties of sediment-algae flocs as function of shear and environmental conditions : a laboratory study

NASA Astrophysics Data System (ADS)

Deng, Z.; He, Q.; Chassagne, C.; Manning, A. J.

2017-12-01

It has been observed that flocculation in-situ is greatly influenced by biochemical parameters[De Lucas Pardo, 2014]. In our previous work [Deng, 2017], we have found that flocs observed in the Yangtze Estuary are composed of mixtures of sediment and algae. In particular we have shown that flocs can be composed solely of algae aggregates. Depending on their position in the water column, the composition of flocs changes, as more or less sediment can be part of the floc. The presence of algae (phytoplankton biomass) in a floc is linked to the measured chlorophyll α concentration [Uncles et al., 1998]. The Particle Size Distribution (PSD) found in-situ depends on parameters such as position in the water column and shear rate, and also seasons. We showed that the PSD found in-situ is similar to the one measured in the lab, for the same floc composition and environmental conditions. In the present work we extend the laboratory investigations by analysing the impact of the floc history on its PSD. The PSD can be bimodal after a grow-break-up-regrow phase, indicating that flocs growth process depend on a timescale that is larger than the timescale associated to the change in shear rate. We will discuss the behaviour of the parameters needed in the flocculation model we propose upon the relevant variables. The ultimate goal is to propose a model that can be implemented in large scale sediment transport models. ReferencesDe Lucas Pardo, M. (2014), Effect of biota on fine sediment transport processes: A study of Lake Markermeer, TU Delft, Delft University of Technology. Deng, Z. (2017), Algae effects on cohesive sediment flocculation: a case study based on field observation in Yangtze Estuary, China (submitted)Uncles, R., A. Easton, M. Griffiths, C. Harris, R. Howland, I. Joint, R. King, A. Morris, and D. Plummer (1998), Concentrations of suspended chlorophyll in the tidal Yorkshire Ouse and Humber Estuary, Science of The Total Environment, 210-211, 367-375, doi:10.1016/s0048-9697(98)00024-2.

The Isolation of Rubber from Milkweed Leaves. An Introductory Organic Chemistry Lab

NASA Astrophysics Data System (ADS)

Volaric, Lisa; Hagen, John P.

2002-01-01

We present an introductory organic chemistry lab in which students isolate rubber from the leaves of milkweed plants (Asclepias syriaca). Students isolated rubber with a recovery of 2.4 ± 1.8% and 1.8 ± 0.7% for the microscale and macroscale procedures, respectively. Infrared spectra of their products were compared with the spectrum of synthetic rubber, cis-polyisoprene. Students tested for elasticity of their product by twisting it on a spatula and pulling; all students found some degree of elasticity.

Specific Inhibitors of Histone Demethylases: Novel Chemical Agents for Breast Cancer Therapy

DTIC Science & Technology

2011-08-01

S. Ng, K. L. Kavanagh, M. A. McDonough, D. Butler , E. S. Pilka, B. M. R. Lienard, J. E. Bray, P. Savitsky, O. Gileadi, F. von Delft, N. R. Rose, J...University of California, Berkeley Postdoctoral Advisor: Professor Judith P. Klinman AWARDS AND HONORS  Ralph E. Powe Junior Faculty Award, Oak

Propeller Design Studies for the Acoustic Research Ship C.F.A.V. QUEST,

DTIC Science & Technology

1981-08-01

8. 5. Manen , J.D. van , "Fundamentals of Ship Resistance and Propulsion Part B", International Shipbuilding Progress Vol. 4, No. 30, February 1957. 6...Oossanen, P. van "Calculation of Performance and Cavitation Characteristics of Propellers, Including the Effects of Non-Uniform Flow". PhD thesis...Delft U;.iversity of Technology, 1974. Also NSMB Publ!cat -,7 457 7. Gent, W. van . "On the Use of Lifting Surface Theory for Moderately and Heavily

Delft3D-Modelling of Hydrodynamic and Water Quality Processes in San Diego Bight

DTIC Science & Technology

2010-09-30

Terrill (SIO Scripps), Dr. Lyle Hibler ( PNL ) and Mark Moline (CalPoly) who are funded separately. LONG-TERM GOALS The long-term goal of this effort is...October 3, 2002. RELATED PROJECTS This work is a cooperation with Dr. Eric Terrill (SIO Scripps), Dr. Lyle Hibler ( PNL ) and Mark Moline (CalPoly) who are funded separately. 5

Application of an unstructured 3D finite volume numerical model to flows and salinity dynamics in the San Francisco Bay-Delta

USGS Publications Warehouse

Martyr-Koller, R.C.; Kernkamp, H.W.J.; Van Dam, Anne A.; Mick van der Wegen,; Lucas, Lisa; Knowles, N.; Jaffe, B.; Fregoso, T.A.

2017-01-01

A linked modeling approach has been undertaken to understand the impacts of climate and infrastructure on aquatic ecology and water quality in the San Francisco Bay-Delta region. The Delft3D Flexible Mesh modeling suite is used in this effort for its 3D hydrodynamics, salinity, temperature and sediment dynamics, phytoplankton and water-quality coupling infrastructure, and linkage to a habitat suitability model. The hydrodynamic model component of the suite is D-Flow FM, a new 3D unstructured finite-volume model based on the Delft3D model. In this paper, D-Flow FM is applied to the San Francisco Bay-Delta to investigate tidal, seasonal and annual dynamics of water levels, river flows and salinity under historical environmental and infrastructural conditions. The model is driven by historical winds, tides, ocean salinity, and river flows, and includes federal, state, and local freshwater withdrawals, and regional gate and barrier operations. The model is calibrated over a 9-month period, and subsequently validated for water levels, flows, and 3D salinity dynamics over a 2 year period.Model performance was quantified using several model assessment metrics and visualized through target diagrams. These metrics indicate that the model accurately estimated water levels, flows, and salinity over wide-ranging tidal and fluvial conditions, and the model can be used to investigate detailed circulation and salinity patterns throughout the Bay-Delta. The hydrodynamics produced through this effort will be used to drive affiliated sediment, phytoplankton, and contaminant hindcast efforts and habitat suitability assessments for fish and bivalves. The modeling framework applied here will serve as a baseline to ultimately shed light on potential ecosystem change over the current century.

Application of an unstructured 3D finite volume numerical model to flows and salinity dynamics in the San Francisco Bay-Delta

NASA Astrophysics Data System (ADS)

Martyr-Koller, R. C.; Kernkamp, H. W. J.; van Dam, A.; van der Wegen, M.; Lucas, L. V.; Knowles, N.; Jaffe, B.; Fregoso, T. A.

2017-06-01

A linked modeling approach has been undertaken to understand the impacts of climate and infrastructure on aquatic ecology and water quality in the San Francisco Bay-Delta region. The Delft3D Flexible Mesh modeling suite is used in this effort for its 3D hydrodynamics, salinity, temperature and sediment dynamics, phytoplankton and water-quality coupling infrastructure, and linkage to a habitat suitability model. The hydrodynamic model component of the suite is D-Flow FM, a new 3D unstructured finite-volume model based on the Delft3D model. In this paper, D-Flow FM is applied to the San Francisco Bay-Delta to investigate tidal, seasonal and annual dynamics of water levels, river flows and salinity under historical environmental and infrastructural conditions. The model is driven by historical winds, tides, ocean salinity, and river flows, and includes federal, state, and local freshwater withdrawals, and regional gate and barrier operations. The model is calibrated over a 9-month period, and subsequently validated for water levels, flows, and 3D salinity dynamics over a 2 year period. Model performance was quantified using several model assessment metrics and visualized through target diagrams. These metrics indicate that the model accurately estimated water levels, flows, and salinity over wide-ranging tidal and fluvial conditions, and the model can be used to investigate detailed circulation and salinity patterns throughout the Bay-Delta. The hydrodynamics produced through this effort will be used to drive affiliated sediment, phytoplankton, and contaminant hindcast efforts and habitat suitability assessments for fish and bivalves. The modeling framework applied here will serve as a baseline to ultimately shed light on potential ecosystem change over the current century.

Inactivation of Cg10062, a cis-3-chloroacrylic acid dehalogenase homologue in Corynebacterium glutamicum, by (R)- and (S)-oxirane-2-carboxylate: analysis and implications.

PubMed

Robertson, Brooklyn A; Johnson, William H; Lo, Herng-Hsiang; Whitman, Christian P

2008-08-19

( R)- and ( S)-oxirane-2-carboxylate were determined to be active site-directed irreversible inhibitors of the cis-3-chloroacrylic acid dehalogenase ( cis-CaaD) homologue Cg10062 found in Corynebacterium glutamicum. Kinetic analysis indicates that the ( R) enantiomer binds more tightly and is the more potent inhibitor, likely reflecting more favorable interactions with active site residues. Pro-1 is the sole site of covalent modification by the ( R) and ( S) enantiomers. Pro-1, Arg-70, Arg-73, and Glu-114, previously identified as catalytic residues in Cg10062, have also been implicated in the inactivation mechanism. Pro-1, Arg-70, and Arg-73 are essential residues for the process as indicated by the observation that the enzymes with the corresponding alanine mutations are not covalently modified by either enantiomer. The E114Q mutant slows covalent modification of Cg10062 but does not prevent it. The results are comparable to those found for the irreversible inactivation of cis-CaaD by ( R)-oxirane-2-carboxylate with two important distinctions: the alkylation of cis-CaaD is stereospecific, and Glu-114 does not take part in the cis-CaaD inactivation mechanism. Cg10062 exhibits low-level cis-CaaD and trans-3-chloroacrylic acid dehalogenase (CaaD) activities, with the cis-CaaD activity predominating. Hence, the preference of Cg10062 for the cis isomer correlates with the observation that the ( R) enantiomer is the more potent inactivator. Moreover, the factors responsible for the relaxed substrate specificity of Cg10062 may account for the stereoselective inactivation by the enantiomeric epoxides. Delineation of these factors would provide a more complete picture of the substrate specificity determinants for cis-CaaD. This study represents an important step toward this goal by setting the stage for a crystallographic analysis of inactivated Cg10062.

McStas-model of the delft SESANS

NASA Astrophysics Data System (ADS)

Knudsen, E.; Udby, L.; Willendrup, P. K.; Lefmann, K.; Bouwman, W. G.

2011-06-01

We present simulation results taking first virtual data from a model of the Spin-Echo Small Angle Scattering (SESANS) instrument situated in Delft, in the framework of the McStas Monte Carlo software package. The main focus has been on making a model of the Delft SESANS instrument, and we can now present the first virtual data from it, using a refracting prism-like sample model. In consequence, polarisation instrumentation is now included natively in the McStas kernel, including options for magnetic fields and a number of utility components. This development has brought us to a point where realistic models of polarisation-enabled instrumentation can be built.

Multi-scale Modeling of the Evolution of a Large-Scale Nourishment

NASA Astrophysics Data System (ADS)

Luijendijk, A.; Hoonhout, B.

2016-12-01

Morphological predictions are often computed using a single morphological model commonly forced with schematized boundary conditions representing the time scale of the prediction. Recent model developments are now allowing us to think and act differently. This study presents some recent developments in coastal morphological modeling focusing on flexible meshes, flexible coupling between models operating at different time scales, and a recently developed morphodynamic model for the intertidal and dry beach. This integrated modeling approach is applied to the Sand Engine mega nourishment in The Netherlands to illustrate the added-values of this integrated approach both in accuracy and computational efficiency. The state-of-the-art Delft3D Flexible Mesh (FM) model is applied at the study site under moderate wave conditions. One of the advantages is that the flexibility of the mesh structure allows a better representation of the water exchange with the lagoon and corresponding morphological behavior than with the curvilinear grid used in the previous version of Delft3D. The XBeach model is applied to compute the morphodynamic response to storm events in detail incorporating the long wave effects on bed level changes. The recently developed aeolian transport and bed change model AeoLiS is used to compute the bed changes in the intertidal and dry beach area. In order to enable flexible couplings between the three abovementioned models, a component-based environment has been developed using the BMI method. This allows a serial coupling of Delft3D FM and XBeach steered by a control module that uses a hydrodynamic time series as input (see figure). In addition, a parallel online coupling, with information exchange in each timestep will be made with the AeoLiS model that predicts the bed level changes at the intertidal and dry beach area. This study presents the first years of evolution of the Sand Engine computed with the integrated modelling approach. Detailed comparisons are made between the observed and computed morphological behaviour for the Sand Engine on an aggregated as well as sub-system level.

Painting, poetry and optics: Johannes Vermeer.

PubMed

Dominiczak, Marek H

2002-02-01

The painter Johannes Vermeer (1632-75) worked in the town of Delft in the Dutch Republic. This article focuses on associations between his painting method and the expertise in optics available in Delft at the time. His art represents an extraordinary combination of technical prowess and poetic expression.

Investigation of cis-4-[18F]Fluoro-D-Proline Uptake in Human Brain Tumors After Multimodal Treatment.

PubMed

Verger, Antoine; Stoffels, Gabriele; Galldiks, Norbert; Lohmann, Philipp; Willuweit, Antje; Neumaier, Bernd; Geisler, Stefanie; Langen, Karl-Josef

2018-04-23

Cis-4-[ 18 F]fluoro-D-proline (D-cis-[ 18 F]FPro) has been shown to pass the intact blood-brain barrier and to accumulate in areas of secondary neurodegeneration and necrosis in the rat brain while uptake in experimental brain tumors is low. This pilot study explores the uptake behavior of D-cis-[ 18 F]FPro in human brain tumors after multimodal treatment. In a prospective study, 27 patients with suspected recurrent brain tumor after treatment with surgery, radiotherapy, and/or chemotherapy (SRC) were investigated by dynamic positron emission tomography (PET) using D-cis-[ 18 F]FPro (22 high-grade gliomas, one unspecified glioma, and 4 metastases). Furthermore, two patients with untreated lesions were included (one glioblastoma, one reactive astrogliosis). Data were compared with the results of PET using O-(2-[ 18 F]fluoroethyl)-L-tyrosine ([ 18 F]FET) which detects viable tumor tissue. Tracer distribution, mean and maximum lesion-to-brain ratios (LBR mean , LBR max ), and time-to-peak (TTP) of the time activity curve (TAC) of tracer uptake were evaluated. Final diagnosis was determined by histology (n = 9), clinical follow-up (n = 10), or by [ 18 F]FET PET (n = 10). D-cis-[ 18 F]FPro showed high uptake in both recurrent brain tumors (n = 11) and lesions classified as treatment-related changes (TRC) only (n = 16) (LBR mean 2.2 ± 0.7 and 2.1 ± 0.6, n.s.; LBR max 3.4 ± 1.2 and 3.2 ± 1.3, n.s.). The untreated glioblastoma and the lesion showing reactive astrogliosis exhibited low D-cis-[ 18 F]FPro uptake. Distribution of [ 18 F]FET and D-cis-[ 18 F]FPro uptake was discordant in 21/29 cases indicating that the uptake mechanisms are different. The high accumulation of D-cis-[ 18 F]FPro in pretreated brain tumors and TRC supports the hypothesis that tracer uptake is related to cell death. Further studies before and after therapy are needed to assess the potential of D-cis-[ 18 F]FPro for treatment monitoring.

Bacterial community structure of a lab-scale anammox membrane bioreactor.

PubMed

Gonzalez-Martinez, Alejandro; Osorio, F; Rodriguez-Sanchez, Alejandro; Martinez-Toledo, Maria Victoria; Gonzalez-Lopez, Jesus; Lotti, Tommaso; van Loosdrecht, M C M

2015-01-01

Autotrophic nitrogen removal technologies have proliferated through the last decade. Among these, a promising one is the membrane bioreactor (MBR) Anammox, which can achieve very high solids retention time and therefore sets a proper environment for the cultivation of anammox bacteria. In this sense, the MBR Anammox is an efficient technology for the treatment of effluents with low organic carbon and high ammonium concentrations once it has been treated under partial nitrification systems. A lab-scale MBR Anammox bioreactor has been built at the Technological University of Delft, The Netherlands and has been proven for efficient nitrogen removal and efficient cultivation of anammox bacteria. In this study, next-generation sequencing techniques have been used for the investigation of the bacterial communities of this MBR Anammox for the first time ever. A strong domination of Candidatus Brocadia bacterium and also the presence of a myriad of other microorganisms that have adapted to this environment were detected, suggesting that the MBR Anammox bioreactor might have a more complex microbial ecosystem that it has been thought. Among these, nitrate-reducing heterotrophs and primary producers, among others, were identified. Definition of the ecological roles of the OTUs identified through metagenomic analysis was discussed. © 2014 American Institute of Chemical Engineers.

How much land for your sand: effects of vegetation and compaction on crevasse splay formation

NASA Astrophysics Data System (ADS)

Nienhuis, J.; Tornqvist, T. E.; Esposito, C. R.

2016-12-01

Crevasse splays, failed avulsions that make up a significant portion of fluvio-deltaic overbank architecture in the Mississippi River Delta, are a natural analog for sediment diversions that are being planned to rebuild or sustain coastal wetlands. Here we use Delft3D to study the rates and mechanisms of crevasse splay growth. Because crevasse splays often form in peat-rich and vegetated environments, we have modified Delft3D to include simple formulations for the dynamic interaction between morphodynamics, vegetation, and soil compaction. Detailed stratigraphic data from prehistoric splays in the Mississippi River Delta provide useful constraints on long-term compaction rates, sedimentology, and splay volumes. We find that compaction and the absence of vegetation increase the lifespan of crevasse splays, sometimes from 900 to 4000 flood days (days during which the crevasse is geomorphically active, equivalent to model days in our simulations). Additionally, we find that in a few tested scenarios vegetation primarily acts to increase channel depths and flush out fine-grained sediment towards the flood-basin, decreasing the bulk mud capture efficiency of the splay. One model experiment with moderate vegetation heights and low susceptibility for soil compaction was a particularly "efficient" sediment diversion: every 1 m3 of imported sediment resulted in 2.55 m2 of new land.

Teaching Sustainable Entrepreneurship to Engineering Students: The Case of Delft University of Technology

ERIC Educational Resources Information Center

Bonnet, Hans; Quist, Jaco; Hoogwater, Daan; Spaans, Johan; Wehrmann, Caroline

2006-01-01

Sustainability, enhancement of personal skills, social aspects of technology, management and entrepreneurship are of increasing concern for engineers and therefore for engineering education. In 1996 at Delft University of Technology this led to the introduction of a subject on sustainable entrepreneurship and technology in the course programmes of…

Single d(ApG)/cis-diamminedichloroplatinum(II) adduct-induced mutagenesis in Escherichia coli

DOE Office of Scientific and Technical Information (OSTI.GOV)

Burnouf, D.; Fuchs, R.P.P.; Gauthier, C.

1990-08-01

The mutation spectrum induced by the widely used antitumor drug cis-diamminedichloroplatinum(II) (cis-DDP) showed that cisDDP(d(ApG)) adducts, although they account for only 25% of the lesions formed are {approx}5 times more mutagenic than the major GG adduct. The authors report the construction of vectors bearing a single cisDDP(d(ApG)) lesion and their use in mutagenesis experiments in Escherichia coli. The mutagenic processing of the lesion is found to depend strictly on induction of the SOS system of the bacterial host cells. In SOS-induced cells, mutation frequencies of 1-2% were detected. All these mutations are targeted to the 5{prime} base of the adduct.more » Single A {yields} T transversions are mainly observed (80%), whereas A {yields} G transitions account for 10% of the total mutations. Tandem base-pair substitutions involving the adenine residue and the thymine residue immediately 5{prime} to the adduct occur at a comparable frequency (10%). No selective loss of the strand bearing the platinum adduct was seen, suggesting that, in vivo, cisDDP(d(ApG)) adducts are not blocking lesions. The high mutation specificity of cisDDP-(d(ApG))-induced mutagenesis is discussed in relation to structural data.« less

Toekomstige Radiocommunicatie in OVO (Soon-to-be Radiocommunication in OVG)

DTIC Science & Technology

2004-12-01

Delft, The Netherlands Brassersplein 2, Delft, The Netherlands 33538 9 . SPONSORING/MONITORING AGENCY NAME(S) AND ADDRESS(ES 10. SPONSORING/MONITORING...AGENCY REPORT NUMBER KCenGM Prins Bernhardkazeme, Barchman Wuytierslaan 198, Amersfoort, The Netherlands TD04-0463 11 . SUPPLEMENTARY NO TES Text in...perationeel-technische criteria ............................................................ 9 3. Wireless Local Area Networks (WLANs) en militaire

Assimilation of Wave and Current Data for Prediction of Inlet and River Mouth Dynamics

DTIC Science & Technology

2013-07-01

onto the Delft3D computational grid and the specification of Riemann -type boundary conditions for the boundary-normal velocity and surface elevation...conditions from time- history data from in situ tide gages. The corrections are applied to the surface-elevation contribution to the Riemann boundary...The algorithms described above are all of the strong-constraint variational variety, and make use of adjoint solvers corresponding to the various

Fostering Entrepreneurship in the CIS Sandbox

ERIC Educational Resources Information Center

Frydenberg, Mark

2013-01-01

A fresh coat of paint and new furniture were the obvious external changes to an eleven-year-old computer lab at Bentley University when it was renovated in 2011. More difficult than changing the outward appearance of the room was changing the perceptions of what happens inside. The facility had a reputation of being a place where only students who…

Three-Fold Intramolecular Ring Closing Alkene Metatheses of Square Planar Complexes with cis Phosphorus Donor Ligands P(X(CH2) mCH═CH2)3 (X = -, m = 5-10; X = O, m = 3-5): Syntheses, Structures, and Thermal Properties of Macrocyclic Dibridgehead Diphosphorus Complexes.

PubMed

Joshi, Hemant; Kharel, Sugam; Ehnbom, Andreas; Skopek, Katrin; Hess, Gisela D; Fiedler, Tobias; Hampel, Frank; Bhuvanesh, Nattamai; Gladysz, John A

2018-05-17

Reactions of cis-PtCl 2 (P((CH 2 ) m CH═CH 2 ) 3 ) 2 and Grubbs' first generation catalyst and then hydrogenations afford cis- PtCl 2 (P((CH 2 ) n ) 3 P) ( cis-2; n = 2 m + 2 = 12 (b), 14 (c), 16 (d), 18 (e), 20 (f), 22 (g); 6-40%), derived from 3-fold interligand metatheses. The phosphite complexes cis-PtCl 2 (P(O(CH 2 ) m* CH═CH 2 ) 3 ) 2 are similarly converted to cis- PtCl 2 (P(O(CH 2 ) n* O) 3 P) ( cis-5; n* = 8 (a), 10 (b), 12 (c), 10-20%). The substitution products cis- PtPh 2 (P((CH 2 ) n ) 3 P) ( cis-6c,d) and cis- PtI 2 (P(O(CH 2 ) 10 O) 3 P) are prepared using Ph 2 Zn and NaI, respectively. Crystal structures of cis-2c,d,f, cis-5a,b, and cis-6c show one methylene bridge that roughly lies in the platinum coordination plane and two that are perpendicular. The thermal behavior of the complexes is examined. When the bridges are sufficiently long, they rapidly exchange via an unusual "triple jump rope" motion over the PtX 2 moieties. NMR data establish Δ H ⧧ , Δ S ⧧ , and Δ G 298K ⧧ /Δ G 393K ⧧ values of 7.8 kcal/mol, -27.9 eu, and 16.1/18.8 kcal/mol for cis-2d, and a Δ G 393K ⧧ of ≥19.6 kcal/mol for the shorter bridged cis-2c. While cis-2c,g gradually convert to trans-2c,g at 150-185 °C in haloarenes, trans-2c,g give little reaction under analogous conditions, establishing the stability order trans > cis. Similar metathesis/hydrogenation sequences with octahedral complexes containing two cis phosphine ligands, fac-ReX(CO) 3 (P((CH 2 ) 6 CH═CH 2 ) 3 ) 2 (X = Cl, Br), give fac- ReX(CO) 3 ( P(CH 2 ) 13 CH 2 )((CH 2 ) 14 )( P(CH 2 ) 13 CH 2 ) (19-50%), which are derived from a combination of interligand and intraligand metathesis. The relative stabilities of cis/ trans and other types of isomers are probed by combinations of molecular dynamics and DFT calculations.

Summer Conference on General Topology and Applications (10th) Held in Amsterdam on 15-18 August 1994

DTIC Science & Technology

1994-08-18

topology. Joint work by: I. Juhisz and Z. Szentmiid6ssy. Room: KC1.37 Time: TUE 16:40-1 7:00 ABSTRACTS 89 Forcing and Normality, II LUcia R. Junqueira...Gerard A. Venema (Calvin College, Grand Rapids, MI, USA) J. Vermeer (TU Delft, Delft, the Netherlands) Paolo Vitolo (Universita della Basilicata, Potenza

Analysis of Carbon Nanotube Field-Effect-Transistors (FETs)

NASA Technical Reports Server (NTRS)

Yamada, Toshishige

1999-01-01

This five page presentation is grouped into 11 numbered viewgraphs, most of which contain one or more diagrams. Some of the diagrams are accompanied by captions, including: 2) Nanotube FET by Delft, IBM; 3) Nanotube FET/Standard MOSFET; 5) Saturation with carrier-carrier; 7) Electronic properties of carbon nanotube; 8) Theoretical nanotube FET characteristics; 11) Summary: Delft and IBM nanotube FET analysis.

[R]MIT Research Centre at Delft University of Technology: A Bridge between Research, Education, Society and Profession

ERIC Educational Resources Information Center

Zijlstra, Hielkje

2009-01-01

In 2006, we launched the [R]MIT Research Centre (Modification, Intervention Transformation) at the Faculty of Architecture at Delft University of Technology. [R]MIT was founded to respond to the need for an integrated, multi-disciplinary approach to the transformation of the built environment. [R]MIT aims to bring momentum to the renewal of…

Comparison. US P-61 and Delft sediment samplers

USGS Publications Warehouse

Beverage, Joseph P.; Williams, David T.

1990-01-01

The Delft Bottle (DB) is a flow-through device designed by the Delft Hydraulic Laboratory (DHL), The Netherlands, to sample sand-sized sediment suspended in streams. The US P-61 sampler was designed by the Federal Interagency Sedimentation Project (FISP) at the St. Anthony Falls Hydraulic Laboratory, Minneapolis, Minnesota, to collect suspended sediment from deep, swift rivers. The results of two point-sampling tests in the United States, the Mississippi River near Vicksburg, Mississippi, in 1983 and the Colorado River near Blythe, California, in 1984, are provided in this report. These studies compare sand-transport rates, rather than total sediment-transport rates, because fine material washes through the DB sampler. In the United States, the commonly used limits for sand-sized material are 0.062 mm to 2.00 mm (Vanoni 1975).

Geomorphic modeling of macro-tidal embayment with extensive tidal flats: Skagit Bay, Washington

DTIC Science & Technology

2012-09-30

integrated Delft3D-MOR submodel. Measured river discharge, predicted tides, bathymetry, wind , and density-driven flow were incorporated into the model...supplied with sediment initially. Water temperature and salinity at the tidal boundary were adapted from (Moore et al., 2008). Wind forcing was...tide range varied from 2.4 m at Deception Pass to 3.5 m at Crescent Harbor. Because observations have indicated that wind -generated waves may be

Purification and characterization of monoclonal antibodies to alpha-linolenic acid.

PubMed

Buffière, F; Cook-Moreau, J; Gualde, N; Rigaud, M

1989-01-01

The covalently linked antigenic complex, bovine serum albumin-alpha-linolenic acid, was used to immunize Balb/c mice against the hapten. Hybridization between splenocytes and the myeloma cell line, P 3 X63 Ag 8,651, resulted in stable clones synthesizing monoclonal antibodies (Mab) that were subsequently purified and characterized. Four Mab (A, B, C, D) were retained and their specificities studied by ELISA. Antibody D only recognized 18-carbon fatty acids having a cis,cis,-cis-1,4,7 unsaturated system in the omega-3 position: it was specific for alpha-linolenic acid. B recognized all fatty acids containing the structure cis,cis,cis-1,4,7-octatriene. A and C recognized polyunsaturated fatty acids with a degree of unsaturation superior to two double bonds.

Property study of poly nitro compounds of cis-syn-cis-2, 6-dioxodecahydro-lH, 5H-diimidazo [4, 5-b: 4', 5'-e] pyrazine

NASA Astrophysics Data System (ADS)

Liu, Yang; Xu, Zhibin; Xu, Yudong; Xu, Liang; Meng, Zihui

2017-03-01

Poly nitro group substituted cis-syn-cis-2, 6-dioxodecahydro-lH, 5H-diimidazo [4, 5-b: 4', 5'-e] pyrazine derivatives are synthesized by modified method and adequately characterized. All compounds have good performance both in density (ρ> 1.85 g/cm3) and high detonation velocity (vD > 8800 m/s, calculated). Some representative compounds, for example, 4 (vD: 9405 ms-1; P: 41.6 GPa) and 5 (vD:9781 ms-1; P: 45.6 GPa) exhibit excellent detonation performances, which are comparable with current energetic compounds such as RDX (vD: 8724 ms-1; P: 35.2 GPa) and HMX (vD:9059 ms-1; P: 39.2 GPa). Considering the sensitivity increasing with the number of nitro group, two componds with tetranitro groups (2 and 3) are worthy of deep research.

Assessment of TD-DFT methods and of various spin scaled CIS(D) and CC2 versions for the treatment of low-lying valence excitations of large organic dyes

NASA Astrophysics Data System (ADS)

Goerigk, Lars; Grimme, Stefan

2010-05-01

We present an extension of our previously published benchmark set for low-lying valence transitions of large organic dyes [L. Goerigk et al., Phys. Chem. Chem. Phys. 11, 4611 (2009)]. The new set comprises in total 12 molecules, including two charged species and one with a clear charge-transfer transition. Our previous study on TD-DFT methods is repeated for the new test set with a larger basis set. Additionally, we want to shed light on different spin-scaled variants of the configuration interaction singles with perturbative doubles correction [CIS(D)] and the approximate coupled cluster singles and doubles method (CC2). Particularly for CIS(D) we want to clarify, which of the proposed versions can be recommended. Our results indicate that an unpublished SCS-CIS(D) variant, which is implemented into the TURBOMOLE program package, shows worse results than the original CIS(D) method, while other modified versions perform better. An SCS-CIS(D) version with a parameterization, that has already been used in an application by us recently [L. Goerigk and S. Grimme, ChemPhysChem 9, 2467 (2008)], yields the best results. Another SCS-CIS(D) version and the SOS-CIS(D) method [Y. M. Rhee and M. Head-Gordon, J. Phys. Chem. A 111, 5314 (2007)] perform very similar, though. For the electronic transitions considered herein, there is no improvement observed when going from the original CC2 to the SCS-CC2 method but further adjustment of the latter seems to be beneficial. Double-hybrid density functionals belong to best methods tested here. Particularly B2GP-PLYP provides uniformly good results for the complete set and is considered to be close to chemical accuracy within an ab initio theory of color. For conventional hybrid functionals, a Fock-exchange mixing parameter of about 0.4 seems to be optimum in TD-DFT treatments of large chromophores. A range-separated functional such as, e.g., CAM-B3LYP seems also to be promising.

Zero- vs. one-dimensional, parametric vs. non-parametric, and confidence interval vs. hypothesis testing procedures in one-dimensional biomechanical trajectory analysis.

PubMed

Pataky, Todd C; Vanrenterghem, Jos; Robinson, Mark A

2015-05-01

Biomechanical processes are often manifested as one-dimensional (1D) trajectories. It has been shown that 1D confidence intervals (CIs) are biased when based on 0D statistical procedures, and the non-parametric 1D bootstrap CI has emerged in the Biomechanics literature as a viable solution. The primary purpose of this paper was to clarify that, for 1D biomechanics datasets, the distinction between 0D and 1D methods is much more important than the distinction between parametric and non-parametric procedures. A secondary purpose was to demonstrate that a parametric equivalent to the 1D bootstrap exists in the form of a random field theory (RFT) correction for multiple comparisons. To emphasize these points we analyzed six datasets consisting of force and kinematic trajectories in one-sample, paired, two-sample and regression designs. Results showed, first, that the 1D bootstrap and other 1D non-parametric CIs were qualitatively identical to RFT CIs, and all were very different from 0D CIs. Second, 1D parametric and 1D non-parametric hypothesis testing results were qualitatively identical for all six datasets. Last, we highlight the limitations of 1D CIs by demonstrating that they are complex, design-dependent, and thus non-generalizable. These results suggest that (i) analyses of 1D data based on 0D models of randomness are generally biased unless one explicitly identifies 0D variables before the experiment, and (ii) parametric and non-parametric 1D hypothesis testing provide an unambiguous framework for analysis when one׳s hypothesis explicitly or implicitly pertains to whole 1D trajectories. Copyright © 2015 Elsevier Ltd. All rights reserved.

Growth Suppression and Therapy Sensitization of Breast Cancer.

DTIC Science & Technology

1997-07-01

mutant jun. As shown in Figure 8, T47D breast cancer cells grown in the presence of 9- cis retinoic acid do become more sensitive to suppression by p53...SRI 1220. We have used the plasmid reactivation assay to demonstrate that repair of a cisplatin damaged plasmid is inhibited by 9- cis retinoic acid in...3 hr in vitro Sensitivity of T47D cells to 9- cis RA with 25 pM cisplatin) 120 --- 25- T47D 1220 M 100 - 11-gal O ,p53 "o 8.0 o. m 5 wR 80 T47D

Hyperactivity induced by stimulation of separate dopamine D-1 and D-2 receptors in rats with bilateral 6-OHDA lesions.

PubMed

Arnt, J

1985-08-26

The effects of DA agonists and antagonists with different dopamine (DA) D-1 and D-2 receptor selectivity have been studied in rats with bilateral 6-OHDA lesions. The D-1 agonist SK & F 38393, the D-2 agonist pergolide and the mixed agonist apomorphine all induced marked hyperactivity in lesioned rats in doses which were without stimulant effect in sham-operated animals. The hyperactivity induced by SK & F 38393 was blocked by the DA D-1 antagonist SCH 23390, but unaffected by the D-2 antagonists spiroperidol or clebopride. Pergolide-induced hyperactivity showed the reverse selectivity. The mixed D-1/D-2 antagonists, cis(Z)-flupentixol and cis(Z)-clopenthixol, however blocked the effect of both agonists. Apomorphine-induced hyperactivity was neither blocked by selective D-1 nor D-2 antagonists, but was dose-dependently inhibited by cis(Z)-flupentixol and cis(Z)-clopenthixol. Potent blockade was also obtained by combined treatment with SCH 23390 and spiroperidol, indicating the need of blocking both D-1 and D-2 receptors simultaneously. The results indicate that D-1 and D-2 receptor function can be independently manipulated in denervated rats and they confirm similar results obtained in rats with unilateral 6-OHDA lesions using circling behaviour.

Tools for Asteroid Regolith Operations

NASA Technical Reports Server (NTRS)

Mueller, Robert P.; Calle, Carlos I.; Mantovani, James G.

2013-01-01

This RFI response is targeting Area 5. Crew Systems for Asteroid Exploration: concepts for lightweight and low volume robotic and extra-vehicular activity (EVA) systems, such as space suits, tools, translation aids, stowage containers, and other equipment.The NASA KSC Surface Systems Office, Granular Mechanics and Regolith Operations (GMRO) Lab and the Electrostatics Surface Physics Lab (ESPL) are dedicated to developing technologies for operating in regolith environments on target body surfaces. We have identified two technologies in our current portfolio that are highly relevant and useful for crews that will visit a re-directed asteroid in Cis-Lunar Space. Both technologies are at a high TRL of 56 and could be rapidly implemented in time for an ARM mission in this decade.

Diagnosis and Dosimetry of Exposure to Sulfur Mustard: Development of Standard Operating Procedures; Further Exploratory Research on Protein Adducts

DTIC Science & Technology

1999-01-01

Adducts 6. AUTHOR(S) Hendrick Benschop, Ph.D. 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) 8. PERFORMING ORGANIZATION TNO Prins Maurits Laboratory...Mannheim, Germany); penicillin (Gist Brocades, Delft, The Netherlands); rabbit-anti-mouse-Ig-horse radish peroxidase (Dakopatts, Glostrup, Denmark); FITC...grown in RPMI1640-medium supplemented with 10% FCS, 1 mM sodium pyruvate, 1 mM glutamine, 100 U/ml penicillin , 0.1 mg/ml streptomycin and 50 mM B

Multi-Model Validation of Currents in the Chesapeake Bay Region in June 2010

DTIC Science & Technology

2012-01-01

host “ DaVinci ” at the Naval Oceanographic Office (NAVOCEANO). The same model configuration also took approximately 1 hr of wall clock time for a 72-hr...comparable to the performance Navy DSRC host DaVinci . Products of water level and horizontal current maps as well as station time series, identical to...DSRC host DaVinci and required approximately 5 hrs of wall-clock time for 72-hr forecasts, including data Figure 10. The Chesapeake Bay Delft3D

Development of a Spot-Application Tool for Rapid, High-Resolution Simulation of Wave-Driven Nearshore Hydrodynamics

DTIC Science & Technology

2013-09-30

flow models, such as Delft3D, with our developed Boussinesq -type model. The vision of this project is to develop an operational tool for the...situ measurements or large-scale wave models. This information will be used to drive the offshore wave boundary condition. • Execute the Boussinesq ...model to match with the Boussinesq -type theory would be one which can simulate sheared and stratified currents due to large-scale (non-wave) forcings

New River Inlet DRI: Observations and Modeling of Flow and Material Exchange & Field and Numerical Study of the Columbia River Mouth

DTIC Science & Technology

2013-09-30

analyze the MCR drifter, in situ mini-catamaran, pressure, and USGS tripod observations; • describe the tidal chocking behavior at New River Inlet (NRI...i.e. waves , wind and potentially stratification) APPROACH Our approach is to collect field observations to evaluate the sensitivity of Delft3D at...forecast model using the predicted tides, wind, wave and river discharge conditions to optimize spatial coverage and drifter retrieval operations. On

Stable and Flexible CuInS2/ZnS:Al-TiO2 Film for Solar-Light-Driven Photodegradation of Soil Fumigant.

PubMed

Yan, Lili; Li, Zhichun; Sun, Mingxing; Shen, Guoqing; Li, Liang

2016-08-10

Semiconductor quantum dots (QDs) are suitable light absorbers for photocatalysis because of their unique properties. However, QDs generally suffer from poor photochemical stability against air, limiting their applications in photocatalysis. In this study, a stable solar-light-driven QDs-containing photocatalytic film was developed to facilitate photocatalytic degradation of the soil fumigant 1,3-dichloropropene (1,3-D). Highly stable CuInS2/ZnS:Al core/shell QDs (CIS/ZnS:Al QDs) were synthesized by doping Al into the ZnS shell and controlling ZnS:Al shell thickness; the CIS/ZnS:Al QDs were subsequently combined with TiO2 to form a CIS/ZnS:Al-TiO2 photocatalyst. The optimized ZnS:Al shell thickness for 1,3-D photodegradation was approximately 1.3 nm, which guaranteed and balanced the good photocatalytic activity and stability of the CIS/ZnS:Al-TiO2 photocatalyst. The photodegradation efficiency of 1,3-D can be maintained up to more than 80% after five cycles during recycling experiment. When CIS/ZnS:Al-TiO2 was deposited as photocatalytic film on a flexible polyethylene terephthalate substrate, over 99% of cis-1,3-D and 98% of trans-1,3-D were depleted as they passed through the film during 15 h of irradiation under natural solar light. This study demonstrated that the stable CIS/ZnS:Al-TiO2 photocatalyst both in powder and film form is a promising agent for photodegradation and emission reduction of soil fumigants.

Characteristics of step-defined physical activity categories in U.S. adults..

PubMed

Sisson, Susan B; Camhi, Sarah M; Tudor-Locke, Catrine; Johnson, William D; Katzmarzyk, Peter T

2012-01-01

Descriptive physical activity epidemiology of the U.S. population is critical for program development and resource allocation. The purpose of this project was to describe step-defined categories (as measured by accelerometer) of U.S. adults and to determine predictors of sedentary classification (<5000 steps/d). The National Health and Nutrition Examination Survey (NHANES) is an annual, nationally representative survey used to determine the health status of the U.S. populace. In-home interviews and physical examination components of NHANES. Overall, 4372 eligible adults wore accelerometers in the 2005-2006 NHANES; 628 were excluded, which yielded 3744 adults (of which 46.8% were men). Steps per day; body mass index (BMI); demographic, household and behavioral variables. Means and frequencies were calculated. Logistic regression was utilized to determine predictors of sedentary classification. Overall, 36.1% were sedentary (i.e., <5000 steps/d); 47.6% were low to somewhat active (5000-9999 steps/d); 16.3% were active to highly active (≥10,000 steps/d). Advancing age (odds ratio [OR], 1.95; confidence intervals [CIs], 1.78, 2.13), higher BMI (OR, 1.40; CIs, 1.23, 1.59), female sex (OR, 1.86; CIs, 1.46, 2.36), African-American versus European-American ethnicity (OR, 1.36; CIs, 1.13, 1.65), household income versus ≥$45,000 (<$25,000: OR, 1.94; CIs, 1.40, 2.69; $25,000-$44,000: OR, 1.51; CIs, 1.23, 1.85), and current versus never smoker (OR, 1.53; CIs, 1.26, 1.86) variables had higher odds of sedentary classification. Usual daily occupational/domestic physical activity categories of standing/walking (OR, .51; CIs, .38, .69); lifting/climbing (OR, .26; CIs, .17, .38); and heavy loads/labor (OR, .16; CIs, .10, .26) had lower odds of sedentary classification than sitting. Over one-third of the U.S. population was classified as sedentary by accelerometer-determined steps per day, and several characteristics predicted sedentary classification.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rycyna, R.E.; Wallace, J.C.; Sharma, M.

Acetone-photosensitized UV irradiation of three thymine oligomers, d(TpT), d(TpTpT), and d(TpTpTpT), forms predominantly cis-syn cyclobutyl photodimers. C-18 reverse-phase high-performance liquid chromatography is used to purify the following positional isomers: d(TpT(p)T), d(T(p)TpT), d-(TpTpT(p)T), d(TpT(p)TpT), d(T(p)TpTpT), and d(T(p)TpT(p)T), where T(p)T represents the cis-syn photodimer. Conformational properties of the cis-syn dimers and adjacent thymine nucleotides have been investigated in solution by using /sup 1/H, /sup 13/C, and /sup 31/P NMR spectroscopy. These studies show that (1) the photodimer conformation in longer oligothymidylates is similar to that in the dinucleoside monophosphate and (2) the cis-syn dimer induces alterations to a greater degree on themore » 5' side than on the 3' side of the photodimer. Specifically, the photodimer distorts the exocyclic bonds epsilon (C3'-O3') in Tp- and ..gamma..(C5'-C4') in -pT(p)- on the 5' side and slightly alters the furanose equilibrium of the -pT nucleotide on the 3' side of the dimer.« less

Cloning and expressing a highly functional and substrate specific farnesoic acid o-methyltransferase from the Asian citrus psyllid (Diaphorina citri Kuwayama).

PubMed

Van Ekert, Evelien; Shatters, Robert G; Rougé, Pierre; Powell, Charles A; Smagghe, Guy; Borovsky, Dov

2015-01-01

The Asian citrus psyllid, Diaphorina citri, transmits a phloem-limited bacterium, Candidatus 'Liberibacter' asiaticus that causes citrus greening disease. Because juvenile hormone (JH) plays an important role in adult and nymphal development, we studied the final steps in JH biosynthesis in D. citri. A putative JH acid methyltransferase ortholog gene (jmtD) and its cognate cDNA were identified by searching D. citri genome database. Expression analysis shows expression in all life stages. In adults, it is expressed in the head-thorax, (containing the corpora allata), and the abdomen (containing ovaries and male accessory glands). A 3D protein model identified the catalytic groove with catalytically active amino acids and the S-adenosyl methionine (SAM)-binding loop. The cDNA was expressed in Escherichia coli cells and the purified enzyme showed high preference for farnesoic acid (FA) and homoFA (kcat of 0.752 × 10(-3) and 0.217 × 10(-3) s(-1), respectively) as compared to JH acid I (JHA I) (cis/trans/cis; 2Z, 6E, 10cis), JHA III (2E, 6E, 10cis), and JHA I (trans/cis/cis; 2E, 2Z, 10cis) (kcat of 0.081 × 10(-3), 0.013 × 10(-3), and 0.003 × 10(-3) s(-1), respectively). This suggests that this ortholog is a DcFA-o-methyl transferase gene (fmtD), not a jmtD, and that JH biosynthesis in D. citri proceeds from FA to JH III through methyl farnesoate (MF). DcFA-o-MT does not require Ca(2+), Mg(2+) or Zn(2+), however, Zn(2+) (1 mM) completely inhibits the enzyme probably by binding H115 at the active groove. This represents the first purified FA-o-MT from Hemiptera with preferred biological activity for FA and not JHA.

Interaction of cis- and trans-RuCl2(DMSO)4 with the nucleotides GpA, d(GpA), ApG, d(ApG) and d(CCTGGTCC): high-field NMR characterization of the reaction products.

PubMed

Anagnostopoulou, A; Moldrheim, E; Katsaros, N; Sletten, E

1999-04-01

Both cis- and trans-RuCl2(DMSO)4 (cis-Ru and trans-Ru) react with ApG, GpA, d(ApG) and d(GpA) to yield products with bifunctional metal coordination of the bases. For each dinucleotide one major product and several minor species are formed. This is in contrast to previous results on analogous reactions between trans-Ru and d(GpG) where a substantial amount of an intermediate species was found. The rates of reaction between dinucleotides and cis-Ru are approximately 20-fold slower than for trans-Ru. The compounds formed with the two isomers exhibit identical proton NMR spectra, suggesting the same coordination mode for ruthenium in the final product. The two purine bases are coordinated to ruthenium through N7 in a head-to-head conformation with the glycosidic angles being in the anti range. Coupling constants indicate a relatively pure 3'-endo conformation for the 5'-sugar and mainly 2'-endo for the 3'-sugar. The similar bifunctional binding mode of cis- and trans-Ru(II) with dinucleotides as evident from the NMR spectra are in contrast to the different mode of interaction suggested earlier for cis- and trans-Ru complexes with DNA. trans-Ru interacts with the deoxyoctanucleotide d(CCTGGTCC), giving two main products during the first 2 h of incubation time. Four H8 guanine resonances are shifted downfield, characteristic of N7 metal coordination. The products are not analyzed in detail, but it is suggested that the structures may be described as two chiral G(N7/N7) chelates.

Painting models

NASA Astrophysics Data System (ADS)

Baart, F.; Donchyts, G.; van Dam, A.; Plieger, M.

2015-12-01

The emergence of interactive art has blurred the line between electronic, computer graphics and art. Here we apply this art form to numerical models. Here we show how the transformation of a numerical model into an interactive painting can both provide insights and solve real world problems. The cases that are used as an example include forensic reconstructions, dredging optimization, barrier design. The system can be fed using any source of time varying vector fields, such as hydrodynamic models. The cases used here, the Indian Ocean (HYCOM), the Wadden Sea (Delft3D Curvilinear), San Francisco Bay (3Di subgrid and Delft3D Flexible Mesh), show that the method used is suitable for different time and spatial scales. High resolution numerical models become interactive paintings by exchanging their velocity fields with a high resolution (>=1M cells) image based flow visualization that runs in a html5 compatible web browser. The image based flow visualization combines three images into a new image: the current image, a drawing, and a uv + mask field. The advection scheme that computes the resultant image is executed in the graphics card using WebGL, allowing for 1M grid cells at 60Hz performance on mediocre graphic cards. The software is provided as open source software. By using different sources for a drawing one can gain insight into several aspects of the velocity fields. These aspects include not only the commonly represented magnitude and direction, but also divergence, topology and turbulence .

DOE Office of Scientific and Technical Information (OSTI.GOV)

Band, L.; Xu, Heng; Bykov, V.

The present study demonstrates that pretreatment of rat brain membranes with (+)-cis-3-methylfentanyl ((+)-cis-MF), followed by extensive washing of the membranes, produces a wash-resistant decreasing in the binding of ({sup 3}H)-(D-ala{sup 2}, D-leu{sup 5})enkephalin to the d binding site of the opioid receptor complex ({delta}{sub cx} binding site). Intravenous administration of (+)-cis-MF (50 {mu}g/kg) to rats produced a pronounced catalepsy and also produced a wash-resistant masking of {delta}{sub cx} and {mu} binding sites in membranes prepared 120 min post-injection. Administration of 1 mg/kg i.v. of the opioid antagonist, 6-desoxy-6{beta}-fluoronaltrexone (cycloFOXY), 100 min after the injection of (+)-cis-MF (20 min prior tomore » the preparation of membranes) completely reversed the catatonia and restored masked {delta}{sub cx} binding sites to control levels. This was not observed with (+)-cycloFOXY. The implications of these and other findings for the mechanism of action of (+)-cis-MF and models of the opioid receptors are discussed.« less

Compartmental and noncompartmental modeling of ¹³C-lycopene absorption, isomerization, and distribution kinetics in healthy adults.

PubMed

Moran, Nancy E; Cichon, Morgan J; Riedl, Kenneth M; Grainger, Elizabeth M; Schwartz, Steven J; Novotny, Janet A; Erdman, John W; Clinton, Steven K

2015-12-01

Lycopene, which is a red carotenoid in tomatoes, has been hypothesized to mediate disease-preventive effects associated with tomato consumption. Lycopene is consumed primarily as the all-trans geometric isomer in foods, whereas human plasma and tissues show greater proportions of cis isomers. With the use of compartmental modeling and stable isotope technology, we determined whether endogenous all-trans-to-cis-lycopene isomerization or isomeric-bioavailability differences underlie the greater proportion of lycopene cis isomers in human tissues than in tomato foods. Healthy men (n = 4) and women (n = 4) consumed (13)C-lycopene (10.2 mg; 82% all-trans and 18% cis), and plasma was collected over 28 d. Unlabeled and (13)C-labeled total lycopene and lycopene-isomer plasma concentrations, which were measured with the use of high-performance liquid chromatography-mass spectrometry, were fit to a 7-compartment model. Subjects absorbed a mean ± SEM of 23% ± 6% of the lycopene. The proportion of plasma cis-(13)C-lycopene isomers increased over time, and all-trans had a shorter half-life than that of cis isomers (5.3 ± 0.3 and 8.8 ± 0.6 d, respectively; P < 0.001) and an earlier time to reach maximal plasma concentration than that of cis isomers (28 ± 7 and 48 ± 9 h, respectively). A compartmental model that allowed for interindividual differences in cis- and all-trans-lycopene bioavailability and endogenous trans-to-cis-lycopene isomerization was predictive of plasma (13)C and unlabeled cis- and all-trans-lycopene concentrations. Although the bioavailability of cis (24.5% ± 6%) and all-trans (23.2% ± 8%) isomers did not differ, endogenous isomerization (0.97 ± 0.25 μmol/d in the fast-turnover tissue lycopene pool) drove tissue and plasma isomeric profiles. (13)C-Lycopene combined with physiologic compartmental modeling provides a strategy for following complex in vivo metabolic processes in humans and reveals that postabsorptive trans-to-cis-lycopene isomerization, and not the differential bioavailability of isomers, drives tissue and plasma enrichment of cis-lycopene. This trial was registered at clinicaltrials.gov as NCT01692340. © 2015 American Society for Nutrition.

Both cis and trans Activities of Foot-and-Mouth Disease Virus 3D Polymerase Are Essential for Viral RNA Replication.

PubMed

Herod, Morgan R; Ferrer-Orta, Cristina; Loundras, Eleni-Anna; Ward, Joseph C; Verdaguer, Nuria; Rowlands, David J; Stonehouse, Nicola J

2016-08-01

The Picornaviridae is a large family of positive-sense RNA viruses that contains numerous human and animal pathogens, including foot-and-mouth disease virus (FMDV). The picornavirus replication complex comprises a coordinated network of protein-protein and protein-RNA interactions involving multiple viral and host-cellular factors. Many of the proteins within the complex possess multiple roles in viral RNA replication, some of which can be provided in trans (i.e., via expression from a separate RNA molecule), while others are required in cis (i.e., expressed from the template RNA molecule). In vitro studies have suggested that multiple copies of the RNA-dependent RNA polymerase (RdRp) 3D are involved in the viral replication complex. However, it is not clear whether all these molecules are catalytically active or what other function(s) they provide. In this study, we aimed to distinguish between catalytically active 3D molecules and those that build a replication complex. We report a novel nonenzymatic cis-acting function of 3D that is essential for viral-genome replication. Using an FMDV replicon in complementation experiments, our data demonstrate that this cis-acting role of 3D is distinct from the catalytic activity, which is predominantly trans acting. Immunofluorescence studies suggest that both cis- and trans-acting 3D molecules localize to the same cellular compartment. However, our genetic and structural data suggest that 3D interacts in cis with RNA stem-loops that are essential for viral RNA replication. This study identifies a previously undescribed aspect of picornavirus replication complex structure-function and an important methodology for probing such interactions further. Foot-and-mouth disease virus (FMDV) is an important animal pathogen responsible for foot-and-mouth disease. The disease is endemic in many parts of the world with outbreaks within livestock resulting in major economic losses. Propagation of the viral genome occurs within replication complexes, and understanding this process can facilitate the development of novel therapeutic strategies. Many of the nonstructural proteins involved in replication possess multiple functions in the viral life cycle, some of which can be supplied to the replication complex from a separate genome (i.e., in trans) while others must originate from the template (i.e., in cis). Here, we present an analysis of cis and trans activities of the RNA-dependent RNA polymerase 3D. We demonstrate a novel cis-acting role of 3D in replication. Our data suggest that this role is distinct from its enzymatic functions and requires interaction with the viral genome. Our data further the understanding of genome replication of this important pathogen. Copyright © 2016 Herod et al.

Both cis and trans Activities of Foot-and-Mouth Disease Virus 3D Polymerase Are Essential for Viral RNA Replication

PubMed Central

Herod, Morgan R.; Ferrer-Orta, Cristina; Loundras, Eleni-Anna; Ward, Joseph C.; Verdaguer, Nuria; Rowlands, David J.

2016-01-01

ABSTRACT The Picornaviridae is a large family of positive-sense RNA viruses that contains numerous human and animal pathogens, including foot-and-mouth disease virus (FMDV). The picornavirus replication complex comprises a coordinated network of protein-protein and protein-RNA interactions involving multiple viral and host-cellular factors. Many of the proteins within the complex possess multiple roles in viral RNA replication, some of which can be provided in trans (i.e., via expression from a separate RNA molecule), while others are required in cis (i.e., expressed from the template RNA molecule). In vitro studies have suggested that multiple copies of the RNA-dependent RNA polymerase (RdRp) 3D are involved in the viral replication complex. However, it is not clear whether all these molecules are catalytically active or what other function(s) they provide. In this study, we aimed to distinguish between catalytically active 3D molecules and those that build a replication complex. We report a novel nonenzymatic cis-acting function of 3D that is essential for viral-genome replication. Using an FMDV replicon in complementation experiments, our data demonstrate that this cis-acting role of 3D is distinct from the catalytic activity, which is predominantly trans acting. Immunofluorescence studies suggest that both cis- and trans-acting 3D molecules localize to the same cellular compartment. However, our genetic and structural data suggest that 3D interacts in cis with RNA stem-loops that are essential for viral RNA replication. This study identifies a previously undescribed aspect of picornavirus replication complex structure-function and an important methodology for probing such interactions further. IMPORTANCE Foot-and-mouth disease virus (FMDV) is an important animal pathogen responsible for foot-and-mouth disease. The disease is endemic in many parts of the world with outbreaks within livestock resulting in major economic losses. Propagation of the viral genome occurs within replication complexes, and understanding this process can facilitate the development of novel therapeutic strategies. Many of the nonstructural proteins involved in replication possess multiple functions in the viral life cycle, some of which can be supplied to the replication complex from a separate genome (i.e., in trans) while others must originate from the template (i.e., in cis). Here, we present an analysis of cis and trans activities of the RNA-dependent RNA polymerase 3D. We demonstrate a novel cis-acting role of 3D in replication. Our data suggest that this role is distinct from its enzymatic functions and requires interaction with the viral genome. Our data further the understanding of genome replication of this important pathogen. PMID:27194768

RNA polymerases react differently at d(ApG) and d(GpG) adducts in DNA modified by cis-diamminedichloroplatinum(II)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Corda, Y.; Job, D.; Anin, M.F.

1992-02-25

Two duplexes (20-mers) were constructed containing either a single cis-(Pt(NH{sub 3}){sub 2}(d(GpG))) or cis-(Pt(NH{sub 3}){sub 2}(d(ApG))) intrastrand cross-link, the major DNA adducts of the antitumor drug cis-diamminedichloroplatinum(II). These synthetic duplexes were multimerized and the resultant polymers used as templates in single-step addition reactions of condensation of a single nucleoside triphosphate substrate to a dinucleotide primer (abortive elongation reaction) catalyzed by prokaryotic or eukaryotic RNA polymerases. Primer-substrate combinations were selected so as to direct trinucleotide product formation within the platinated bases of the templates. Transcription experiments established that cis-DDP-DNA adducts formed at d(ApG) or d(GpG) sites are not an absolute blockmore » to formation of a single phosphodiester bond by either Escherichia coli RNA polymerase or wheat germ RNA polymerase II. Furthermore, the kinetic data indicate that single-step addition reactions are much more impeded at the platinated d(GpG) than at the platinated d(ApG) site and that the mechanisms of inhibition of RNA polymerase activity are different at the two platinated sites. In particular, binding affinity between E. coli RNA polymerase and the d(GpG)-containing platinated template is lowered, as the apparent K{sub m} of enzyme for the platinated polymer is increased by a factor of 4-5. These results are discussed in reaction to the distortions induced in DNA by the two adducts.« less

Flash Photolysis Experiment of o-Methyl Red as a Function of pH: A Low-Cost Experiment for the Undergraduate Physical Chemistry Lab

ERIC Educational Resources Information Center

Larsen, Molly C.; Perkins, Russell J.

2016-01-01

A low-cost, time-resolved spectroscopy experiment appropriate for third year physical chemistry students is presented. Students excite o-methyl red in basic solutions with a laser pointer and use a modular spectrometer with a CCD array detector to monitor the transient spectra as the higher-energy cis conformer of the molecule converts back to the…

DNA unwinding produced by site-specific intrastrand cross-links of the antitumor drug cis-diamminedichloroplatinum(II)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bellon, S.F.; Coleman, J.H.; Lippard, S.J.

The DNA unwinding produced by specific adducts of the antitumor drug cis-diamminedi-chloroplatinum(II) has been quantitatively determined. Synthetic DNA duplex oligonucleotides of varying lengths with two base pair cohesive ends were synthesized and characterized that contained site-specific intrastrand N7-purine/N7-purine cross-links. Included are cis-(Pt(NH{sub 3}){sub 2}(d(GpG))), cis-(Pt(NH){sub 3}{sub 2}(d(ApG))), and cis-(Pt(NH{sub 3}){sub 2}(d(GpTpG))) adducts, respectively referred to as cis-GG, cis-AG, and cis-GTG. Local DNA distortions at the site of platination were amplified by polymerization of these monomers and quantitatively evaluated by using polyacrylamide gel electrophoresis. The extent of DNA unwinding was determined by systematically varying the interplatinum distance, or phasing, in polymersmore » containing the adducts. The multimer that migrates most slowly gives the optimal phasing for cooperative bending, from which the degree of unwinding can be obtained. The authors find that the cis-GG and cis-AG adducts both unwind DNA by 13{degrees}, while the cis-GTG adduct unwinds DNA by 23{degrees}. In addition, experiments are presented that support previous studies revealing that a hinge joint forms at the sites of platination in DNA molecules containing trans-GTG adducts. On the basis of an analysis of the present and other published studies of site-specifically modified DNA. The authors propose that local duplex unwinding is a major determinant in the recognition of DNA damage by the Escherichia coli (A)BC excinuclease. In addition, local duplex unwinding of 13{degrees} and bending by 35{degrees} are shown to correlate well with the recognition of platinated DNA by a previously identified damage recognition protein (DRP) in human cells.« less

Mapping Adipose and Muscle Tissue Expression Quantitative Trait Loci in African Americans to Identify Genes for Type 2 Diabetes and Obesity

PubMed Central

Sajuthi, Satria P.; Sharma, Neeraj K.; Chou, Jeff W.; Palmer, Nicholette D.; McWilliams, David R.; Beal, John; Comeau, Mary E.; Ma, Lijun; Calles-Escandon, Jorge; Demons, Jamehl; Rogers, Samantha; Cherry, Kristina; Menon, Lata; Kouba, Ethel; Davis, Donna; Burris, Marcie; Byerly, Sara J.; Ng, Maggie C.Y.; Maruthur, Nisa M.; Patel, Sanjay R.; Bielak, Lawrence F.; Lange, Leslie; Guo, Xiuqing; Sale, Michèle M.; Chan, Kei Hang; Monda, Keri L.; Chen, Gary K.; Taylor, Kira; Palmer, Cameron; Edwards, Todd L; North, Kari E.; Haiman, Christopher A.; Bowden, Donald W.; Freedman, Barry I.; Langefeld, Carl D.; Das, Swapan K.

2016-01-01

Relative to European Americans, type 2 diabetes (T2D) is more prevalent in African Americans (AAs). Genetic variation may modulate transcript abundance in insulin-responsive tissues and contribute to risk; yet published studies identifying expression quantitative trait loci (eQTLs) in African ancestry populations are restricted to blood cells. This study aims to develop a map of genetically regulated transcripts expressed in tissues important for glucose homeostasis in AAs, critical for identifying the genetic etiology of T2D and related traits. Quantitative measures of adipose and muscle gene expression, and genotypic data were integrated in 260 non-diabetic AAs to identify expression regulatory variants. Their roles in genetic susceptibility to T2D, and related metabolic phenotypes were evaluated by mining GWAS datasets. eQTL analysis identified 1,971 and 2,078 cis-eGenes in adipose and muscle, respectively. Cis-eQTLs for 885 transcripts including top cis-eGenes CHURC1, USMG5, and ERAP2, were identified in both tissues. 62.1% of top cis-eSNPs were within ±50kb of transcription start sites and cis-eGenes were enriched for mitochondrial transcripts. Mining GWAS databases revealed association of cis-eSNPs for more than 50 genes with T2D (e.g. PIK3C2A, RBMS1, UFSP1), gluco-metabolic phenotypes, (e.g. INPP5E, SNX17, ERAP2, FN3KRP), and obesity (e.g. POMC, CPEB4). Integration of GWAS meta-analysis data from AA cohorts revealed the most significant association for cis-eSNPs of ATP5SL and MCCC1 genes, with T2D and BMI, respectively. This study developed the first comprehensive map of adipose and muscle tissue eQTLs in AAs (publically accessible at https://mdsetaa.phs.wakehealth.edu) and identified genetically-regulated transcripts for delineating genetic causes of T2D, and related metabolic phenotypes. PMID:27193597

Crew Systems for Asteroid Exploration: Concepts for Lightweight & Low Volume EVA Systems

NASA Technical Reports Server (NTRS)

Mueller, Rob; Calle, Carlos; Mantovani, James

2013-01-01

This RFI response is targeting Area 5. Crew Systems for Asteroid Exploration: concepts for lightweight and low volume robotic and extra-vehicular activity (EVA) systems, such as space suits, tools, translation aids, stowage containers, and other equipment. The NASA KSC Surface Systems Office, Granular Mechanics and Regolith Operations (GMRO) Lab and the Electrostatics & Surface Physics Lab (ESPL) are dedicated to developing technologies for operating in regolith environments on target body surfaces. We have identified two technologies in our current portfolio that are highly relevant and useful for crews that will visit a re-directed asteroid in Cis-Lunar Space. Both technologies are at a high TRL of 5/6 and could be rapidly implemented in time for an ARM mission in this decade.

Phosphorus-nitrogen compounds: Part 28. Syntheses, structural characterizations, antimicrobial and cytotoxic activities, and DNA interactions of new phosphazenes bearing vanillinato and pendant ferrocenyl groups

NASA Astrophysics Data System (ADS)

Tümer, Yasemin; Asmafiliz, Nuran; Kılıç, Zeynel; Hökelek, Tuncer; Yasemin Koç, L.; Açık, Leyla; Yola, Mehmet Lütfi; Solak, Ali Osman; Öner, Yağmur; Dündar, Devrim; Yavuz, Makbule

2013-10-01

The gradually Cl replacement reactions of spirocyclic mono (1 and 2) and bisferrocenyl cyclotriphosphazenes (3-5) with the potassium salt of 4-hydroxy-3-methoxybenzaldehyde (potassium vanillinate) gave mono (1a-5a), geminal (gem-1b-5b), non-geminal (cis-1b, cis-5b and trans-2b-5b), tri (1c-5c) and tetra-substituted phosphazenes (1d-5d). Some phosphazenes have stereogenic P-center(s). The chirality of 4c was verified using chiral HPLC column. Electrochemical behaviors were influenced only by the number of ferrocene groups, but not the length of the amine chains and the substituent(s). The structures of the new phosphazenes were determined by FTIR, MS, 1H, 13C and 31P NMR, HSQC and HMBC spectral data. The solid-state structures of cis-1b and 4d were examined by single crystal X-ray diffraction techniques. The twelve phosphazene derivatives were screened for antimicrobial activity and the compounds 5a, cis-1b and 2c exhibited the highest antibacterial activity against G(+) and G(-) bacteria. In addition, it was found that overall gem-1b inhibited the growth of Mycobacterium tuberculosis. The compounds 1d, 2d and 4d were tested in HeLa cancer cell lines. Among these compounds, 2d had cytotoxic effect on HeLa cell in the first 48 h. Moreover, interactions between compounds 2a, gem-1b, gem-2b, cis-1b, 2c, 3c, 4c, 5c, 1d, 2d and 4d, and pBR322 plasmid DNA were investigated.

Comparative studies on the concentration of rare earth elements and heavy metals in the atmospheric particulate matter in Beijing, China, and in Delft, The Netherlands.

PubMed

Wang, C X; Zhu, W; Peng, A; Guichreit, R

2001-05-01

Atmospheric particulate matter (APM) was collected at three sampling sites in Beijing, China, from February to June 1998. The concentrations of rare earth elements (REE) and cobalt (Co), zinc (Zn), copper (Cu), cadmium (Cd) and lead (Pb) in the APM were determined by inductively coupled plasma mass spectrometry (ICP-MS). The results obtained in Beijing, China, were compared to that obtained in Delft, the Netherlands, in 1997. The influence of coal combustion was considered. The results demonstrated that the content of APM, the concentrations of REE and Co, Zn, Cd, Pb in the APM in Beijing, China, were higher than that in Delft, the Netherlands. From the ratios of La to Ce, and La to Sm, which may be used as tracers for the origin of the REE, it is concluded that the origins of REE in China differ from those in the Netherlands.

Folded and unfolded conformations of the omega-3 polyunsaturated fatty acid family: ch(3)ch(2)[ch=chch(2)](b)[ch(2)](m)cooh: first principles study.

PubMed

Law, Jacqueline M S; Szori, Milan; Izsak, Robert; Penke, Botond; Csizmadia, Imre G; Viskolcz, Bela

2006-05-11

Polyunsaturated fatty acids (PUFA) like stearidonic acid (SDA;18:4 n-3) eicosapentaenoic acid (EPA; 20:5 n-3), and docosahexaenoic acid (DHA; 22:6 n-3) and its chain fragment models were studied at B3LYP/6-31G(d) levels of theory. Significant conformations for the cis and trans isomers were selected to obtained the thermodynamic functions (DeltaH, DeltaS, DeltaG) for the cis-trans isomerization and for folding using the B3LYP/6-311+G(2d,p)//B3LYP/6-31G(d) level of theory. The structural analysis shows that there are significant differences in thermodynamic function of the trans- and cis-PUFAs. The trans-cis isomerization energy values reinforce the consistency and the relative accuracy of theoretical model calculations. The observed flexibility of naturally cis PUFAs could be explained by a very special "smooth basin" PES of the motif of sp(2)-sp(3)-sp(2) hybrid states as reported previously (J. Phys. Chem. A 2005, 109, 520-533). We assumed that intrinsic thermodynamic functions may describe this flexible folding process. The folding enthalpy as well as the folding entropy suggests that there is a new role of the cis-PUFAs in membranes: these cis isomers may have a strong influence on membrane stability and permeability. The average length of the cis helix and beta PUFA was approximated. The difference between the lengths of these two structures is approximately 10 A.

Dissociated overexpression of cathepsin D and estrogen receptor alpha in preinvasive mammary tumors.

PubMed

Roger, P; Daures, J P; Maudelonde, T; Pignodel, C; Gleizes, M; Chapelle, J; Marty-Double, C; Baldet, P; Mares, P; Laffargue, F; Rochefort, H

2000-05-01

The role of estrogen as a promoter agent of sporadic breast cancer has been considered by assaying, in benign breast disease (BBD) and in situ carcinomas (CIS), 2 markers, the estrogen receptor alpha (ERalpha) and cathepsin D (cath-D) involved in estrogen action on mammary tissue. ERalpha and cath-D were assayed by quantitative immunohistochemistry using an image analyzer in 170 lesions of varying histological risk (94 BBD and 76 CIS), and in "normal" glands close to these lesions. The ERalpha level increased significantly in proliferative BBD with atypia (P < .001), in non-high-grade CIS (P < .001), and in adjacent "normal" glands. ERalpha level was decreased in high-grade ductal CIS (DCIS) and also in adjacent "normal" glands. Cath-D level increased in ductal proliferative BBD (P < or = .01) and in high-grade DCIS (P < or = .003), but not in the other lesions. After menopause, ERalpha level was increased (P = .012) but not cath-D level. According to Mac Neman test, the high-grade DCIS were predominantly ERalpha negative and cath-D positive (P = .0017), and the other CIS were predominantly ERalpha positive and cath-D negative (P = .0002). The 2 markers are overexpressed early in premalignant lesions, but independently. This dissociation suggests a branched model of mammary carcinogenesis involving 1 estrogen-independent pathway with high cath-D and low ERalpha levels (including high-grade DCIS) and 1 estrogen-dependent pathway, with high ERalpha level (including proliferative BBD with atypia and low-grade DCIS). We propose that ERalpha-negative breast cancers may develop directly from high-grade DCIS and that ERalpha assay in preinvasive lesions should be considered in prevention trials with antiestrogens.

3-D Modeling of a Nearshore Dye Release

NASA Astrophysics Data System (ADS)

Maxwell, A. R.; Hibler, L. F.; Miller, L. M.

2006-12-01

The usage of computer modeling software in predicting the behavior of a plume discharged into deep water is well established. Nearfield plume spreading in coastal areas with complex bathymetry is less commonly studied; in addition to geometry, some of the difficulties of this environment include: tidal exchange, temperature, and salinity gradients. Although some researchers have applied complex hydrodynamic models to this problem, nearfield regions are typically modeled by calibration of an empirical or expert system model. In the present study, the 3D hydrodynamic model Delft3D-FLOW was used to predict the advective transport from a point release in Sequim Bay, Washington. A nested model approach was used, wherein a coarse model using a mesh extending to nearby tide gages (cell sizes up to 1 km) was run over several tidal cycles in order to provide boundary conditions to a smaller area. The nested mesh (cell sizes up to 30 m) was forced on two open boundaries using the water surface elevation derived from the coarse model. Initial experiments with the uncalibrated model were conducted in order to predict plume propagation based on the best available field data. Field experiments were subsequently carried out by releasing rhodamine dye into the bay at near-peak flood tidal current and near high slack tidal conditions. Surface and submerged releases were carried out from an anchored vessel. Concurrently collected data from the experiment include temperature, salinity, dye concentration, and hyperspectral imagery, collected from boats and aircraft. A REMUS autonomous underwater vehicle was used to measure current velocity and dye concentration at varying depths, as well as to acquire additional bathymetric information. Preliminary results indicate that the 3D hydrodynamic model offers a reasonable prediction of plume propagation speed and shape. A sensitivity analysis is underway to determine the significant factors in effectively using the model as a predictive tool for plume tracking in data-limited environments. The Delft-PART stochastic particle transport model is also being examined to determine its utility for the present study.

Compartmental and noncompartmental modeling of 13C-lycopene absorption, isomerization, and distribution kinetics in healthy adults123

PubMed Central

Moran, Nancy E; Cichon, Morgan J; Riedl, Kenneth M; Grainger, Elizabeth M; Schwartz, Steven J; Novotny, Janet A; Erdman, John W; Clinton, Steven K

2015-01-01

Background: Lycopene, which is a red carotenoid in tomatoes, has been hypothesized to mediate disease-preventive effects associated with tomato consumption. Lycopene is consumed primarily as the all-trans geometric isomer in foods, whereas human plasma and tissues show greater proportions of cis isomers. Objective: With the use of compartmental modeling and stable isotope technology, we determined whether endogenous all-trans-to-cis-lycopene isomerization or isomeric-bioavailability differences underlie the greater proportion of lycopene cis isomers in human tissues than in tomato foods. Design: Healthy men (n = 4) and women (n = 4) consumed 13C-lycopene (10.2 mg; 82% all-trans and 18% cis), and plasma was collected over 28 d. Unlabeled and 13C-labeled total lycopene and lycopene-isomer plasma concentrations, which were measured with the use of high-performance liquid chromatography–mass spectrometry, were fit to a 7-compartment model. Results: Subjects absorbed a mean ± SEM of 23% ± 6% of the lycopene. The proportion of plasma cis-13C-lycopene isomers increased over time, and all-trans had a shorter half-life than that of cis isomers (5.3 ± 0.3 and 8.8 ± 0.6 d, respectively; P < 0.001) and an earlier time to reach maximal plasma concentration than that of cis isomers (28 ± 7 and 48 ± 9 h, respectively). A compartmental model that allowed for interindividual differences in cis- and all-trans-lycopene bioavailability and endogenous trans-to-cis-lycopene isomerization was predictive of plasma 13C and unlabeled cis- and all-trans-lycopene concentrations. Although the bioavailability of cis (24.5% ± 6%) and all-trans (23.2% ± 8%) isomers did not differ, endogenous isomerization (0.97 ± 0.25 μmol/d in the fast-turnover tissue lycopene pool) drove tissue and plasma isomeric profiles. Conclusion: 13C-Lycopene combined with physiologic compartmental modeling provides a strategy for following complex in vivo metabolic processes in humans and reveals that postabsorptive trans-to-cis-lycopene isomerization, and not the differential bioavailability of isomers, drives tissue and plasma enrichment of cis-lycopene. This trial was registered at clinicaltrials.gov as NCT01692340. PMID:26561629

Supplementation of increasing amounts of linseed oil to dairy cows fed total mixed rations: effects on digestion, ruminal fermentation characteristics, protozoal populations, and milk fatty acid composition.

PubMed

Benchaar, C; Romero-Pérez, G A; Chouinard, P Y; Hassanat, F; Eugene, M; Petit, H V; Côrtes, C

2012-08-01

The effect of linseed oil (LO) supplementation on nutrient digestibility, forage (i.e., timothy hay) in sacco ruminal degradation, ruminal fermentation characteristics, protozoal populations, milk production, and milk fatty acid (FA) profile in dairy cows was investigated. Four ruminally cannulated, primiparous lactating cows were used in a 4 × 4 Latin square design (28-d periods). They were fed a total mixed ration (50:50 forage:concentrate (F:C) ratio [dry matter (DM) basis] without supplementation (control, CTL), or supplemented (wt/wt; DM basis) with LO at 2, 3, or 4%. Supplementation with LO had no effect on DM intake (19 kg/d) and apparent total-tract digestibility of nutrients (organic matter, neutral detergent fiber, acid detergent fiber, starch, and gross energy). Ruminal pH, ammonia, and total volatile FA concentrations were not changed by LO supplementation to diets. Extent of changes in volatile FA pattern and effective ruminal degradability of DM of timothy hay were minor. Neither the total numbers nor the genera distribution of protozoa was changed by the addition of increasing amounts of LO to the diet. Milk yield increased linearly (26.1, 27.3, 27.4, and 28.4 kg/d for CTL to LO4, respectively) as the amount of LO added to the diet increased. Milk fat content was not affected by LO supplementation, whereas milk protein content decreased linearly with increasing amounts of LO in the diet. Milk fat proportions of several intermediates of ruminal biohydrogenation of polyunsaturated FA (i.e., trans-10 18:1, trans-11 18:1, cis-9,trans-11 18:2, trans-11,cis-15 18:2, and cis-9,trans-11,cis-15 18:3) increased linearly with LO addition to the diet. The proportion of cis-9,cis-12 18:2 decreased linearly (2.06, 1.99, 1.91, and 1.83% for CTL to LO4, respectively) as the amount of LO in the diet increased. Milk fat content of cis-9,cis-12,cis-15 18:3 increased as the level of LO in the diet increased up to 3% but no further increase was observed when 4% of LO was fed (0.33, 0.79, 0.86, and 0.86% for CTL to LO4, respectively). A similar quadratic response to LO supplementation was also observed for cis-5,cis-8,cis-11,cis-14,cis-17 20:5 and cis-5,cis-7,cis-10,cis-13,cis-16 22:5. The results of the present study show that LO can be safely supplemented up to 4% in forage-based diets of dairy cows to enrich milk with potential health beneficial FA (i.e., n-3 FA) without causing any detrimental effects on rumen function, digestion, and milk production. Copyright © 2012 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Thermodynamic and kinetic data for adduct formation, cis-trans isomerization and redox reactions of ML4 complexes: a case study with rhodium- and iridium-tropp complexes in d8, d9 and d10 valence electron configurations (tropp=dibenzotropylidene phosphanes).

PubMed

Breher, Frank; Rüegger, Heinz; Mlakar, Marina; Rudolph, Manfred; Deblon, Stephan; Schönberg, Hartmut; Boulmaâz, Souad; Thomaier, Jörg; Grützmacher, Hansjörg

2004-02-06

The formation of adducts of the square-planar 16-electron complexes trans-[M(tropp(ph))(2)](+) and cis-[M(tropp(ph))(2)](+) (M=Rh, Ir; tropp(Ph)=5-diphenylphosphanyldibenzo[a,d]cycloheptene) with acetonitrile (acn) and Cl(-), and the redox chemistry of these complexes was investigated by various physical methods (NMR and UV-visible spectroscopy, square-wave voltammetry), in order to obtain some fundamental thermodynamic and kinetic data for these systems. A trans/cis isomerization cannot be detected for [M(tropp(ph))(2)](+) in non-coordinating solvents. However, both isomers are connected through equilibria of the type trans-[M(tropp(ph))(2)](+)+L<==>[ML(tropp(ph))(2)](n)<==>cis-[M(tropp(ph))(2)](+)+L, involving five-coordinate intermediates [ML(tropp(ph))(2)](n) (L=acn, n=+1; L=Cl(-), n=0). Values for K(d) (K(f)), that is, the dissociation (formation) equilibrium constant, and k(d) (k(f)), that is, the dissociation (formation) rate constant, were obtained. The formation reactions are fast, especially with the trans isomers (k(f)>1x10(5) m(-1) s(-1)). The reaction with the sterically more hindered cis isomers is at least one order of magnitude slower. The stability of the five-coordinate complexes [ML(tropp(ph))(2)](n) increases with Ir>Rh and Cl(-)>acn. The dissociation reaction has a pronounced influence on the square-wave (SW) voltammograms of trans/cis-[Ir(tropp(ph))(2)](+). With the help of the thermodynamic and kinetic data independently determined by other physical means, these reactions could be simulated and allowed the setting up of a reaction sequence. Examination of the data obtained showed that the trans/cis isomerization is a process with a low activation barrier for the four-coordinate 17-electron complexes [M(tropp(ph))(2)](0) and especially that a disproportionation reaction 2 trans/cis-[M(tropp(ph))(2)](0)-->[M(tropp(ph))(2)](+)+[M(tropp(ph))(2)](-) may be sufficiently fast to mask the true reactivity of the paramagnetic species, which are probably less reactive than their diamagnetic equilibrium partners.

Ethics and engineering courses at Delft University of Technology: contents, educational setup and experiences.

PubMed

van de Poel, I R; Zandvoort, H; Brumsen, M

2001-04-01

This article reports on the development and teaching of compulsory courses on ethics and engineering at Delft University of Technology (DUT). Attention is paid to the teaching goals, the educational setup and methods, the contents of the courses, involvement of staff from engineering schools, experiences to date, and challenges for the future. The choices made with respect to the development and teaching of the courses are placed within the European and Dutch context and are compared and contrasted with the American situation and experiences.

A Numerical Study of Hydrodynamics and Sediment Transport in Fourleague Bay, Louisiana

NASA Astrophysics Data System (ADS)

Hu, K.; Chen, Q. J.; Xu, K.; Bentley, S. J.; WANG, J.

2017-12-01

Fourleague Bay is a shallow and vertically well-mixed estuary in south-central Louisiana. This estuary is highly impacted by wind (e.g., cold fronts and tropical storms), river discharge from the Atchafalaya River and tides from the Gulf of Mexico, and is being used as an analog site to study impacts of sediment-diversion restoration strategies in the Mississippi River Delta. In this study, a coupled flow-wave Delft3D model was setup and applied to study hydrodynamics and sediment transport in this area. The model grid size is 1071x631 with a 50-m resolution in the bay. Vegetation is considered by rigid cylinders in both flow and wave modules. The offshore water level boundary conditions were provided by a Gulf-scale Delft3D model. Model parameters, especially for cohesive sediment transport such as settling velocity, erosion rate and critical bottom shear stress, were calibrated using the field observation data during three seasons from May 2015 to March 2016. The modeled water levels, currents, significant wave heights and suspended sediment concentrations agreed fairly well with measurements, which suggests a reasonable model performance. Seasonal variations were analyzed based on different scenarios. A series of numerical experiments were set up to quantify the contributions of different factors, such as river discharge, tides and waves to sediment transport in this area. This model will be further applied to be part of a landscape ecosystem model to test landscape and population change over time with manipulations to sediment delivery. This study was funded by the National Science Foundation (SEES-1427389 and CCF-1539567).

NMR analysis of cleaved Escherichia coli thioredoxin (1-73/74-108) and its P76A variant: cis/trans peptide isomerization.

PubMed Central

Yu, W. F.; Tung, C. S.; Wang, H.; Tasayco, M. L.

2000-01-01

Inspection of high resolution three-dimensional (3D) structures from the protein database reveals an increasing number of cis-Xaa-Pro and cis-Xaa-Yaa peptide bonds. However, we are still far from being able to predict whether these bonds will remain cis upon single-site substitution of Pro or Yaa and/or cleavage of a peptide bond close to it in the sequence. We have chosen oxidized Escherichia coli thioredoxin (Trx), a member of the Trx superfamily with a single alpha/beta domain and cis P76 to determine the effect of single-site substitution and/or cleavage on this isomer. Standard two-dimensional (2D) NMR analysis were performed on cleaved Trx (1-73/74-108) and its P76A variant. Analysis of the NOE connectivities indicates remarkable similarity between the secondary and supersecondary structure of the noncovalent complexes and Trx. Analysis of the 2D version of the HCCH-TOCSY and HMQC-NOESY-HMQC and 13C-filtered HMQC-NOESY spectra of cleaved Trx with uniformly 13C-labeled 175 and P76 shows surprising conservation of both cis P76 and packing of 175 against W31. A similar NMR analysis of its P76A variant provides no evidence for cis A76 and shows only subtle local changes in both the packing of 175 and the interstrand connectivities between its most protected hydrophobic strands (beta2 and beta4). Indeed, a molecular simulation model for the trans P76A variant of Trx shows only subtle local changes around the substitution site. In conclusion, cleavage of R73 is insufficient to provoke cis/trans isomerization of P76, but cleavage and single-site substitution (P76A) favors the trans isomer. PMID:10739243

Long-lived and Well-resolved Mn2+ Ion Emissions in CuInS-ZnS Quantum Dots

PubMed Central

Cao, Sheng; Li, Chengming; Wang, Lin; Shang, Minghui; Wei, Guodong; Zheng, Jinju; Yang, Weiyou

2014-01-01

CuInS2 (CIS) quantum dots (QDs) have tunable photoluminescence (PL) behaviors in the visible and near infrared spectral range with markedly lower toxicity than the cadmium-based counterparts, making them very promising applications in light emitting and solar harvesting. However, there still remain material- and fabrication- related obstacles in realizing the high-performance CIS-based QDs with well-resolved Mn2+ d-d emission, long emission lifetimes as well as high efficiencies. Here, we demonstrate the growth of high-quality Mn2+-doped CuInS-ZnS (CIS-ZnS) QDs based on a multi-step hot-injection strategy. The resultant QDs exhibit a well-resolved Mn2+ d-d emission with a high PL quantum yield (QY) up to 66% and an extremely long excited state lifetime up to ~3.78 ms, which is nearly two times longer than the longest one of “green” QDs ever reported. It is promising that the synthesized Mn2+-doped CIS-ZnS QDs might open new doors for their practical applications in bioimaging and opto/electronic devices. PMID:25515207

Different DNA damage response of cis and trans isomers of commonly used UV filter after the exposure on adult human liver stem cells and human lymphoblastoid cells.

PubMed

Sharma, Anežka; Bányiová, Katarína; Babica, Pavel; El Yamani, Naouale; Collins, Andrew Richard; Čupr, Pavel

2017-09-01

2-ethylhexyl 4-methoxycinnamate (EHMC), used in many categories of personal care products (PCPs), is one of the most discussed ultraviolet filters because of its endocrine-disrupting effects. EHMC is unstable in sunlight and can be transformed from trans-EHMC to emergent cis-EHMC. Toxicological studies are focusing only on trans-EHMC; thus the toxicological data for cis-EHMC are missing. In this study, the in vitro genotoxic effects of trans- and cis-EHMC on adult human liver stem cells HL1-hT1 and human-derived lymphoblastoid cells TK-6 using a high-throughput comet assay were studied. TK-6 cells treated with cis-EHMC showed a high level of DNA damage when compared to untreated cells in concentrations 1.56 to 25μgmL -1 . trans-EHMC showed genotoxicity after exposure to the two highest concentrations 12.5 and 25μgmL -1 . The increase in DNA damage on HL1-hT1 cells induced by cis-EHMC and trans-EHMC was detected at the concentration 25μgmL -1 . The No observed adverse effect level (NOAEL, mg kg -1 bwday -1 ) was determined using a Quantitative in vitro to in vivo extrapolation (QIVIVE) approach: NOAEL trans-EHMC =3.07, NOAEL cis-EHMC =0.30 for TK-6 and NOAEL trans-EHMC =26.46, NOAEL cis-EHMC =20.36 for HL1-hT1. The hazard index (HI) was evaluated by comparing the reference dose (RfD, mgkg -1 bwday -1 ) obtained from our experimental data with the chronic daily intake (CDI) of the female population. Using comet assay experimental data with the more sensitive TK-6 cells, HI cis-EHMC was 7 times higher than HI trans-EHMC . In terms of CDI, relative contributions were; dermal exposure route>oral>inhalation. According to our results we recommend the RfD trans-EHMC =0.20 and RfD cis-EHMC =0.02 for trans-EHMC and cis-EHMC, respectively, to use for human health risk assessment. The significant difference in trans-EHMC and cis-EHMC response points to the need for toxicological reevaluation and application reassessment of both isomers in PCPs. Copyright © 2017 Elsevier B.V. All rights reserved.

The effects of mental fatigue on cricket-relevant performance among elite players.

PubMed

Veness, Darren; Patterson, Stephen David; Jeffries, Owen; Waldron, Mark

2017-12-01

This study investigated the effects of a mentally fatiguing test on physical tasks among elite cricketers. In a cross-over design, 10 elite male cricket players from a professional club performed a cricket run-two test, a Batak Lite reaction time test and a Yo-Yo-Intermittent Recovery Level 1 (Yo-Yo-IR1) test, providing a rating of perceived exertion (RPE) after completing a 30-min Stroop test (mental fatigue condition) or 30-min control condition. Perceived fatigue was assessed before and after the two conditions and motivation was measured before testing. There were post-treatment differences in the perception of mental fatigue (P < 0.001; d = -7.82, 95% CIs = -9.05-6.66; most likely). Cricket run-two (P = 0.002; d = -0.51, 95% CIs = -0.72-0.30; very likely), Yo-Yo-IR1 distance (P = 0.023; d = 0.39, 95% CIs = 0.14-0.64; likely) and RPE (P = 0.001; d = -1.82, 95% CIs = -2.49-1.14; most likely) were negatively affected by mental fatigue. The Batak Lite test was not affected (P = 0.137), yet a moderate (d = 0.41, 95% CIs = -0.05-0.87) change was likely. Mental fatigue, induced by an app-based Stroop test, negatively affected cricket-relevant performance.

Emerging roles in plant defense for cis-jasmone-induced cytochrome P450 CYP81D11.

PubMed

Matthes, Michaela; Bruce, Toby; Chamberlain, Keith; Pickett, John; Napier, Johnathan

2011-04-01

cis-Jasmone is a volatile organic compound emitted constitutively by flowers or leaves of several plant species where it acts as an attractant for pollinators and as a chemical cue for host localisation (or avoidance) for insects. ( 1-3) It is also released by some plant species after feeding damage inflicted by herbivorous insects and in this case might serve as a chemical cue for parasitoids to guide them to their prey (so called "indirect defense"). ( 4,5) Moreover, we have recently shown that plants can perceive cis-jasmone and that it acts as a signaling molecule in A. thaliana, inducing a discrete and distinctive suite of genes, of which a large subset is putatively involved in metabolism and defense responses. ( 6) Cytochrome P450s feature prominently in these functional subsets and of these the highest fold change upon cis-jasmone treatment occurred with the cytochrome CYP81D11 (At3g28740). ( 6) Hence this gene was chosen for a more thorough analysis of the potential biological relevance of the cis-jasmone induced defense response. Although the precise function of CYP81D11 remains to be determined, we could previously demonstrate its involvement in the indirect defense response in Arabidopsis, as plants exposed to cis-jasmone ceased to be attractive to the aphid parasitoid Aphidius ervi when this P450 was inactivated by T-DNA insertion mutagenesis. ( 6) Here we report additional experiments which give further support to a role of CYP81D11 in the direct or indirect defense response of A. thaliana.

In-orbit results of Delfi-n3Xt: Lessons learned and move forward

NASA Astrophysics Data System (ADS)

Guo, Jian; Bouwmeester, Jasper; Gill, Eberhard

2016-04-01

This paper provides an update of the Delfi nanosatellite programme of the Delft University of Technology (TU Delft), with a focus on the recent in-orbit results of the second TU Delft satellite Delfi-n3Xt. In addition to the educational objective that has been reached with more than 80 students involved in the project, most of the technological objectives of Delfi-n3Xt have also been fulfilled with successful in-orbit demonstrations of payloads and platform. Among these demonstrations, four are highlighted in this paper, including a solid cool gas micropropulsion system, a new type of solar cell, a more robust Command and Data Handling Subsystem (CDHS), and a highly integrated Attitude Determination and Control Subsystem (ADCS) that performs three-axis active control using reaction wheels. Through the development of Delfi-n3Xt, significant experiences and lessons have been learned, which motivated a further step towards DelFFi, the third Delfi CubeSat mission, to demonstrate autonomous formation flying using two CubeSats named Delta and Phi. A brief update of the DelFFi mission is also provided.

A chiral HPLC method for the simultaneous separation of configurational isomers of the predominant cis/trans forms of astaxanthin.

PubMed

Abu-Lafi, S; Turujman, S A

1997-01-01

We report an HPLC method that allows the simultaneous separation of configurational isomers of the predominant cis/trans forms of astaxanthin. The configurational isomers of the all-trans-, and most of the configurational isomers of the 9-cis-, 13-cis- and 15-cis-astaxanthin were separated on a Sumichiral OA-2000 column, which is manufactured and packed in Japan with a Pirkle covalent D-phenylglycine chiral stationary phase (CSP). The large separation of the cis isomers from the all-trans isomers that we report here ensure the suitability of this method for the routine determination of the ratio of the configurational isomers of all-trans-astaxanthin.

Microbial degradation of 2,4-dichlorophenoxyacetic acid: Insight into the enzymes and catabolic genes involved, their regulation and biotechnological implications.

PubMed

Kumar, Ajit; Trefault, Nicole; Olaniran, Ademola Olufolahan

2016-01-01

A considerable progress has been made to understand the mechanisms of biodegradation of 2,4-dichlorophenoxyacetic acid (2,4-D). 2,4-D biodegradation pathway has been elucidated in many microorganisms including Cupriavidus necator JMP134 (previously known as Wautersia eutropha, Ralstonia eutropha and Alcaligenes eutrophus) and Pseudomonas strains. It generally involves the side chain removal of 2,4-D by α-ketoglutarate-dependent 2,4-D dioxygenase (tfdA) to form 2,4-dichlorophenol (2,4-DCP); hydroxylation of 2,4-DCP by 2,4-DCP hydroxylase (tfdB) to form dichlorocatechol; ortho or meta cleavage of dichlorocatechol by chlorocatechol 1,2-dioxygenase (tfdC) to form 2,4-dichloro-cis,cis-muconate; conversion of 2,4-dichloro-cis,cis-muconate to 2-chlorodienelactone by chloromuconate cycloisomerase (tfdD); conversion of 2-chlorodienelactone to 2-chloromaleylacetate by chlorodienelactone hydrolase (tfdE) and, finally, conversion of 2-chloromaleylacetate to 3-oxoadepate via maleylacetate by chloromaleylacetate reductase and maleylacetate reductase (tfdF), respectively, which is funnelled to the tricarboxylic acid cycle. The latest review on microbial breakdown of 2,4-D, other halogenated aromatic pesticides, and related compounds was compiled by Haggblom, however, a considerable progress has been made in this area of research since then. Thus, this review focuses on the recent advancement on 2,4-D biodegradation, the enzymes, and genes involved and their biotechlogical implications.

Improving global flood risk awareness through collaborative research: Id-Lab

NASA Astrophysics Data System (ADS)

Weerts, A.; Zijderveld, A.; Cumiskey, L.; Buckman, L.; Verlaan, M.; Baart, F.

2015-12-01

Scientific and end-user collaboration on operational flood risk modelling and forecasting requires an environment where scientists and end-users can physically work together and demonstrate, enhance and learn about new tools, methods and models for forecasting and warning purposes. Therefore, Deltares has built a real-time demonstration, training and research infrastructure ('operational' room and ICT backend). This research infrastructure supports various functions like (1) Real time response and disaster management, (2) Training, (3) Collaborative Research, (4) Demonstration. The research infrastructure will be used for a mixture of these functions on a regular basis by Deltares and a multitude of both scientists as well as end users such as universities, research institutes, consultants, governments and aid agencies. This infrastructure facilitates emergency advice and support during international and national disasters caused by rainfall, tropical cyclones or tsunamis. It hosts research flood and storm surge forecasting systems for global/continental/regional scale. It facilitates training for emergency & disaster management (along with hosting forecasting system user trainings in for instance the forecasting platform Delft-FEWS) both internally and externally. The facility is expected to inspire and initiate creative innovations by bringing together different experts from various organizations. The room hosts interactive modelling developments, participatory workshops and stakeholder meetings. State of the art tools, models and software, being applied across the globe are available and on display within the facility. We will present the Id-Lab in detail and we will put particular focus on the global operational forecasting systems GLOFFIS (Global Flood Forecasting Information System) and GLOSSIS (Global Storm Surge Information System).

cisTEM, user-friendly software for single-particle image processing.

PubMed

Grant, Timothy; Rohou, Alexis; Grigorieff, Nikolaus

2018-03-07

We have developed new open-source software called cis TEM (computational imaging system for transmission electron microscopy) for the processing of data for high-resolution electron cryo-microscopy and single-particle averaging. cis TEM features a graphical user interface that is used to submit jobs, monitor their progress, and display results. It implements a full processing pipeline including movie processing, image defocus determination, automatic particle picking, 2D classification, ab-initio 3D map generation from random parameters, 3D classification, and high-resolution refinement and reconstruction. Some of these steps implement newly-developed algorithms; others were adapted from previously published algorithms. The software is optimized to enable processing of typical datasets (2000 micrographs, 200 k - 300 k particles) on a high-end, CPU-based workstation in half a day or less, comparable to GPU-accelerated processing. Jobs can also be scheduled on large computer clusters using flexible run profiles that can be adapted for most computing environments. cis TEM is available for download from cistem.org. © 2018, Grant et al.

cisTEM, user-friendly software for single-particle image processing

PubMed Central

2018-01-01

We have developed new open-source software called cisTEM (computational imaging system for transmission electron microscopy) for the processing of data for high-resolution electron cryo-microscopy and single-particle averaging. cisTEM features a graphical user interface that is used to submit jobs, monitor their progress, and display results. It implements a full processing pipeline including movie processing, image defocus determination, automatic particle picking, 2D classification, ab-initio 3D map generation from random parameters, 3D classification, and high-resolution refinement and reconstruction. Some of these steps implement newly-developed algorithms; others were adapted from previously published algorithms. The software is optimized to enable processing of typical datasets (2000 micrographs, 200 k – 300 k particles) on a high-end, CPU-based workstation in half a day or less, comparable to GPU-accelerated processing. Jobs can also be scheduled on large computer clusters using flexible run profiles that can be adapted for most computing environments. cisTEM is available for download from cistem.org. PMID:29513216

Theoretical Studies of Routes to Synthesis of Tetrahedral N4

NASA Technical Reports Server (NTRS)

Lee, Timothy J.; Dateo, Christopher E.

2007-01-01

A paper [Chem. Phys. Lett. 345, 295 (2001)] describes theoretical studies of excited electronic states of nitrogen molecules, with a view toward utilizing those states in synthesizing tetrahedral N4, or Td N4 a metastable substance under consideration as a high-energy-density rocket fuel. Several ab initio theoretical approaches were followed in these studies, including complete active space self-consistent field (CASSCF), state-averaged CASSCF (SA-CASSCF), singles configuration interaction (CIS), CIS with second-order and third-order correlation corrections [CIS(D) and CIS(3)], and linear response singles and doubles coupled-cluster (LRCCSD). Standard double zeta polarized and triple zeta double polarized one-particle basis sets were used. The CASSCF calculations overestimated the excitation energies, while SACASSCF calculations partly corrected these overestimates. The accuracy of the CIS calculations varied, depending on the particular state, while the CIS(D), CIS(3), and LRCCSD results were in generally good agreement. The energies of the lowest six excited singlet states of Td N4 as calculated by the LRCCSD were compared with the energies of possible excited states of N2 + N2 fragments, leading to the conclusion that the most likely route for synthesis of Td N4 would involve a combination of two bound quintet states of N2.

[Research on the range of motion measurement system for spine based on LabVIEW image processing technology].

PubMed

Li, Xiaofang; Deng, Linhong; Lu, Hu; He, Bin

2014-08-01

A measurement system based on the image processing technology and developed by LabVIEW was designed to quickly obtain the range of motion (ROM) of spine. NI-Vision module was used to pre-process the original images and calculate the angles of marked needles in order to get ROM data. Six human cadaveric thoracic spine segments T7-T10 were selected to carry out 6 kinds of loads, including left/right lateral bending, flexion, extension, cis/counterclockwise torsion. The system was used to measure the ROM of segment T8-T9 under the loads from 1 Nm to 5 Nm. The experimental results showed that the system is able to measure the ROM of the spine accurately and quickly, which provides a simple and reliable tool for spine biomechanics investigators.

Type 2 diabetes (T2D) associated polymorphisms regulate expression of adjacent transcripts in transformed lymphocytes, adipose, and muscle from Caucasian and African-American subjects.

PubMed

Sharma, Neeraj K; Langberg, Kurt A; Mondal, Ashis K; Elbein, Steven C; Das, Swapan K

2011-02-01

Genome-wide association scans (GWAS) have identified novel single nucleotide polymorphisms (SNPs) that increase T2D susceptibility and indicated the role of nearby genes in T2D pathogenesis. We hypothesized that T2D-associated SNPs act as cis-regulators of nearby genes in human tissues and that expression of these transcripts may correlate with metabolic traits, including insulin sensitivity (S(I)). Association of SNPs with the expression of their nearest transcripts was tested in adipose and muscle from 168 healthy individuals who spanned a broad range of S(I) and body mass index (BMI) and in transformed lymphocytes (TLs). We tested correlations between the expression of these transcripts in adipose and muscle with metabolic traits. Utilizing allelic expression imbalance (AEI) analysis we examined the presence of other cis-regulators for those transcripts in TLs. SNP rs9472138 was significantly (P = 0.037) associated with the expression of VEGFA in TLs while rs6698181 was detected as a cis-regulator for the PKN2 in muscle (P = 0.00027) and adipose (P = 0.018). Significant association was also observed for rs17036101 (P = 0.001) with expression of SYN2 in adipose of Caucasians. Among 19 GWAS-implicated transcripts, expression of VEGFA in adipose was correlated with BMI (r = -0.305) and S(I) (r = 0.230). Although only a minority of the T2D-associated SNPs were validated as cis-eQTLs for nearby transcripts, AEI analysis indicated presence of other cis-regulatory polymorphisms in 54% of these transcripts. Our study suggests that a small subset of GWAS-identified SNPs may increase T2D susceptibility by modulating expression of nearby transcripts in adipose or muscle.

Determination of trans- and cis-urocanic acid in relation to histamine, putrescine, and cadaverine contents in tuna (Auxis Thazard) at different storage temperatures.

PubMed

Zare, Davood; Muhammad, Kharidah; Bejo, Mohd Hair; Ghazali, H M

2015-02-01

Scombroid fish poisoning is usually associated with consumption of fish containing high levels of histamine. However, reports indicate that some cases have responded to antihistamine therapy while ingested histamine levels in these cases were low. Potentiation of histamine toxicity by some biogenic amines, and release of endogenous histamine by other compounds such as cis-urocanic acid (UCA) are some hypotheses that have been put forth to explain this anomaly. Very little is known about the effects of storage conditions on the production of both UCA isomers and biogenic amines in tuna. Thus, the production of trans- and cis-UCA, histamine, putrescine, and cadaverine in tuna during 15 d of storage at 0, 3, and 10 °C and 2 d storage at ambient temperature were monitored. The initial trans- and cis-UCA contents in fresh tuna were 2.90 and 1.47 mg/kg, respectively, whereas the levels of putrescine and cadaverine were less than 2 mg/kg, and histamine was not detected. The highest levels of trans- and cis-UCA were obtained during 15 d storage at 3 °C (23.74 and 21.79 mg/kg, respectively) while the highest concentrations of histamine (2796 mg/kg), putrescine (220.32 mg/kg) and cadaverine (1045.20 mg/kg) were obtained during storage at room temperature, 10 and 10 °C, respectively. Histamine content increased considerably during storage at 10 °C whereas trans- and cis-UCA contents changed slightly. The initial trans-UCA content decreased during storage at ambient temperature. Thus, unlike histamine, concentrations of trans- and cis-UCA did not result in elevated levels during storage of tuna. © 2015 Institute of Food Technologists®

Production of {Σ (1385)^{± }} and {Ξ (1530)0} in p-Pb collisions at {√{s_{NN}}= 5.02} TeV

NASA Astrophysics Data System (ADS)

Adamová, D.; Aggarwal, M. M.; Aglieri Rinella, G.; Agnello, M.; Agrawal, N.; Ahammed, Z.; Ahmad, S.; Ahn, S. U.; Aiola, S.; Akindinov, A.; Alam, S. N.; Albuquerque, D. S. D.; Aleksandrov, D.; Alessandro, B.; Alexandre, D.; Alfaro Molina, R.; Alici, A.; Alkin, A.; Alme, J.; Alt, T.; Altinpinar, S.; Altsybeev, I.; Alves Garcia Prado, C.; An, M.; Andrei, C.; Andrews, H. A.; Andronic, A.; Anguelov, V.; Anson, C.; Antičić, T.; Antinori, F.; Antonioli, P.; Anwar, R.; Aphecetche, L.; Appelshäuser, H.; Arcelli, S.; Arnaldi, R.; Arnold, O. W.; Arsene, I. C.; Arslandok, M.; Audurier, B.; Augustinus, A.; Averbeck, R.; Azmi, M. D.; Badalà, A.; Baek, Y. W.; Bagnasco, S.; Bailhache, R.; Bala, R.; Baldisseri, A.; Ball, M.; Baral, R. C.; Barbano, A. M.; Barbera, R.; Barile, F.; Barioglio, L.; Barnaföldi, G. G.; Barnby, L. S.; Barret, V.; Bartalini, P.; Barth, K.; Bartke, J.; Bartsch, E.; Basile, M.; Bastid, N.; Basu, S.; Bathen, B.; Batigne, G.; Batista Camejo, A.; Batyunya, B.; Batzing, P. C.; Bearden, I. G.; Beck, H.; Bedda, C.; Behera, N. K.; Belikov, I.; Bellini, F.; Bello Martinez, H.; Bellwied, R.; Beltran, L. G. E.; Belyaev, V.; Bencedi, G.; Beole, S.; Bercuci, A.; Berdnikov, Y.; Berenyi, D.; Bertens, R. A.; Berzano, D.; Betev, L.; Bhasin, A.; Bhat, I. R.; Bhati, A. K.; Bhattacharjee, B.; Bhom, J.; Bianchi, L.; Bianchi, N.; Bianchin, C.; Bielčík, J.; Bielčíková, J.; Bilandzic, A.; Biro, G.; Biswas, R.; Biswas, S.; Blair, J. T.; Blau, D.; Blume, C.; Boca, G.; Bock, F.; Bogdanov, A.; Boldizsár, L.; Bombara, M.; Bonomi, G.; Bonora, M.; Book, J.; Borel, H.; Borissov, A.; Borri, M.; Botta, E.; Bourjau, C.; Braun-Munzinger, P.; Bregant, M.; Broker, T. A.; Browning, T. A.; Broz, M.; Brucken, E. J.; Bruna, E.; Bruno, G. E.; Budnikov, D.; Buesching, H.; Bufalino, S.; Buhler, P.; Buitron, S. A. I.; Buncic, P.; Busch, O.; Buthelezi, Z.; Butt, J. B.; Buxton, J. T.; Cabala, J.; Caffarri, D.; Caines, H.; Caliva, A.; Calvo Villar, E.; Camerini, P.; Capon, A. A.; Carena, F.; Carena, W.; Carnesecchi, F.; Castillo Castellanos, J.; Castro, A. J.; Casula, E. A. R.; Ceballos Sanchez, C.; Cerello, P.; Chang, B.; Chapeland, S.; Chartier, M.; Charvet, J. L.; Chattopadhyay, S.; Chattopadhyay, S.; Chauvin, A.; Cherney, M.; Cheshkov, C.; Cheynis, B.; Chibante Barroso, V.; Chinellato, D. D.; Cho, S.; Chochula, P.; Choi, K.; Chojnacki, M.; Choudhury, S.; Christakoglou, P.; Christensen, C. H.; Christiansen, P.; Chujo, T.; Chung, S. U.; Cicalo, C.; Cifarelli, L.; Cindolo, F.; Cleymans, J.; Colamaria, F.; Colella, D.; Collu, A.; Colocci, M.; Conesa Balbastre, G.; Conesa del Valle, Z.; Connors, M. E.; Contreras, J. G.; Cormier, T. M.; Corrales Morales, Y.; Cortés Maldonado, I.; Cortese, P.; Cosentino, M. R.; Costa, F.; Costanza, S.; Crkovská, J.; Crochet, P.; Cuautle, E.; Cunqueiro, L.; Dahms, T.; Dainese, A.; Danisch, M. C.; Danu, A.; Das, D.; Das, I.; Das, S.; Dash, A.; Dash, S.; De, S.; De Caro, A.; de Cataldo, G.; de Conti, C.; de Cuveland, J.; De Falco, A.; De Gruttola, D.; De Marco, N.; De Pasquale, S.; De Souza, R. D.; Degenhardt, H. F.; Deisting, A.; Deloff, A.; Deplano, C.; Dhankher, P.; Di Bari, D.; Di Mauro, A.; Di Nezza, P.; Di Ruzza, B.; Diaz Corchero, M. A.; Dietel, T.; Dillenseger, P.; Divià, R.; Djuvsland, Ø.; Dobrin, A.; Domenicis Gimenez, D.; Dönigus, B.; Dordic, O.; Drozhzhova, T.; Dubey, A. K.; Dubla, A.; Ducroux, L.; Duggal, A. K.; Dupieux, P.; Ehlers, R. J.; Elia, D.; Endress, E.; Engel, H.; Epple, E.; Erazmus, B.; Erhardt, F.; Espagnon, B.; Esumi, S.; Eulisse, G.; Eum, J.; Evans, D.; Evdokimov, S.; Fabbietti, L.; Fabris, D.; Faivre, J.; Fantoni, A.; Fasel, M.; Feldkamp, L.; Feliciello, A.; Feofilov, G.; Ferencei, J.; Fernández Téllez, A.; Ferreiro, E. G.; Ferretti, A.; Festanti, A.; Feuillard, V. J. G.; Figiel, J.; Figueredo, M. A. S.; Filchagin, S.; Finogeev, D.; Fionda, F. M.; Fiore, E. M.; Floris, M.; Foertsch, S.; Foka, P.; Fokin, S.; Fragiacomo, E.; Francescon, A.; Francisco, A.; Frankenfeld, U.; Fronze, G. G.; Fuchs, U.; Furget, C.; Furs, A.; Fusco Girard, M.; Gaardhøje, J. J.; Gagliardi, M.; Gago, A. M.; Gajdosova, K.; Gallio, M.; Galvan, C. D.; Gangadharan, D. R.; Ganoti, P.; Gao, C.; Garabatos, C.; Garcia-Solis, E.; Garg, K.; Garg, P.; Gargiulo, C.; Gasik, P.; Gauger, E. F.; Gay Ducati, M. B.; Germain, M.; Ghosh, P.; Ghosh, S. K.; Gianotti, P.; Giubellino, P.; Giubilato, P.; Gladysz-Dziadus, E.; Glässel, P.; Goméz Coral, D. M.; Gomez Ramirez, A.; Gonzalez, A. S.; Gonzalez, V.; González-Zamora, P.; Gorbunov, S.; Görlich, L.; Gotovac, S.; Grabski, V.; Graczykowski, L. K.; Graham, K. L.; Greiner, L.; Grelli, A.; Grigoras, C.; Grigoriev, V.; Grigoryan, A.; Grigoryan, S.; Grion, N.; Gronefeld, J. M.; Grosa, F.; Grosse-Oetringhaus, J. F.; Grosso, R.; Gruber, L.; Grull, F. R.; Guber, F.; Guernane, R.; Guerzoni, B.; Gulbrandsen, K.; Gunji, T.; Gupta, A.; Gupta, R.; Guzman, I. B.; Haake, R.; Hadjidakis, C.; Hamagaki, H.; Hamar, G.; Hamon, J. C.; Harris, J. W.; Harton, A.; Hatzifotiadou, D.; Hayashi, S.; Heckel, S. T.; Hellbär, E.; Helstrup, H.; Herghelegiu, A.; Herrera Corral, G.; Herrmann, F.; Hess, B. A.; Hetland, K. F.; Hillemanns, H.; Hippolyte, B.; Hladky, J.; Horak, D.; Hosokawa, R.; Hristov, P.; Hughes, C.; Humanic, T. J.; Hussain, N.; Hussain, T.; Hutter, D.; Hwang, D. S.; Ilkaev, R.; Inaba, M.; Ippolitov, M.; Irfan, M.; Isakov, V.; Islam, M. S.; Ivanov, M.; Ivanov, V.; Izucheev, V.; Jacak, B.; Jacazio, N.; Jacobs, P. M.; Jadhav, M. B.; Jadlovska, S.; Jadlovsky, J.; Jahnke, C.; Jakubowska, M. J.; Janik, M. A.; Jayarathna, P. H. S. Y.; Jena, C.; Jena, S.; Jercic, M.; Jimenez Bustamante, R. T.; Jones, P. G.; Jusko, A.; Kalinak, P.; Kalweit, A.; Kang, J. H.; Kaplin, V.; Kar, S.; Karasu Uysal, A.; Karavichev, O.; Karavicheva, T.; Karayan, L.; Karpechev, E.; Kebschull, U.; Keidel, R.; Keijdener, D. L. D.; Keil, M.; Ketzer, B.; Mohisin Khan, M.; Khan, P.; Khan, S. A.; Khanzadeev, A.; Kharlov, Y.; Khatun, A.; Khuntia, A.; Kielbowicz, M. M.; Kileng, B.; Kim, D. W.; Kim, D. J.; Kim, D.; Kim, H.; Kim, J. S.; Kim, J.; Kim, M.; Kim, M.; Kim, S.; Kim, T.; Kirsch, S.; Kisel, I.; Kiselev, S.; Kisiel, A.; Kiss, G.; Klay, J. L.; Klein, C.; Klein, J.; Klein-Bösing, C.; Klewin, S.; Kluge, A.; Knichel, M. L.; Knospe, A. G.; Kobdaj, C.; Kofarago, M.; Kollegger, T.; Kolojvari, A.; Kondratiev, V.; Kondratyeva, N.; Kondratyuk, E.; Konevskikh, A.; Kopcik, M.; Kour, M.; Kouzinopoulos, C.; Kovalenko, O.; Kovalenko, V.; Kowalski, M.; Koyithatta Meethaleveedu, G.; Králik, I.; Kravčáková, A.; Krivda, M.; Krizek, F.; Kryshen, E.; Krzewicki, M.; Kubera, A. M.; Kučera, V.; Kuhn, C.; Kuijer, P. G.; Kumar, A.; Kumar, J.; Kumar, L.; Kumar, S.; Kundu, S.; Kurashvili, P.; Kurepin, A.; Kurepin, A. B.; Kuryakin, A.; Kushpil, S.; Kweon, M. J.; Kwon, Y.; La Pointe, S. L.; La Rocca, P.; Lagana Fernandes, C.; Lakomov, I.; Langoy, R.; Lapidus, K.; Lara, C.; Lardeux, A.; Lattuca, A.; Laudi, E.; Lavicka, R.; Lazaridis, L.; Lea, R.; Leardini, L.; Lee, S.; Lehas, F.; Lehner, S.; Lehrbach, J.; Lemmon, R. C.; Lenti, V.; Leogrande, E.; León Monzón, I.; Lévai, P.; Li, S.; Li, X.; Lien, J.; Lietava, R.; Lindal, S.; Lindenstruth, V.; Lippmann, C.; Lisa, M. A.; Litichevskyi, V.; Ljunggren, H. M.; Llope, W. J.; Lodato, D. F.; Loenne, P. I.; Loginov, V.; Loizides, C.; Loncar, P.; Lopez, X.; López Torres, E.; Lowe, A.; Luettig, P.; Lunardon, M.; Luparello, G.; Lupi, M.; Lutz, T. H.; Maevskaya, A.; Mager, M.; Mahajan, S.; Mahmood, S. M.; Maire, A.; Majka, R. D.; Malaev, M.; Maldonado Cervantes, I.; Malinina, L.; Mal'Kevich, D.; Malzacher, P.; Mamonov, A.; Manko, V.; Manso, F.; Manzari, V.; Mao, Y.; Marchisone, M.; Mareš, J.; Margagliotti, G. V.; Margotti, A.; Margutti, J.; Marín, A.; Markert, C.; Marquard, M.; Martin, N. A.; Martinengo, P.; Martinez, J. A. L.; Martínez, M. I.; Martínez García, G.; Martinez Pedreira, M.; Mas, A.; Masciocchi, S.; Masera, M.; Masoni, A.; Mastroserio, A.; Mathis, A. M.; Matyja, A.; Mayer, C.; Mazer, J.; Mazzilli, M.; Mazzoni, M. A.; Meddi, F.; Melikyan, Y.; Menchaca-Rocha, A.; Meninno, E.; Mercado Pérez, J.; Meres, M.; Mhlanga, S.; Miake, Y.; Mieskolainen, M. M.; Mihaylov, D.; Mikhaylov, K.; Milano, L.; Milosevic, J.; Mischke, A.; Mishra, A. N.; Miśkowiec, D.; Mitra, J.; Mitu, C. M.; Mohammadi, N.; Mohanty, B.; Montes, E.; Moreira De Godoy, D. A.; Moreno, L. A. P.; Moretto, S.; Morreale, A.; Morsch, A.; Muccifora, V.; Mudnic, E.; Mühlheim, D.; Muhuri, S.; Mukherjee, M.; Mulligan, J. D.; Munhoz, M. G.; Münning, K.; Munzer, R. H.; Murakami, H.; Murray, S.; Musa, L.; Musinsky, J.; Myers, C. J.; Naik, B.; Nair, R.; Nandi, B. K.; Nania, R.; Nappi, E.; Naru, M. U.; Natal da Luz, H.; Nattrass, C.; Navarro, S. R.; Nayak, K.; Nayak, R.; Nayak, T. K.; Nazarenko, S.; Nedosekin, A.; Negrao De Oliveira, R. A.; Nellen, L.; Nesbo, S. V.; Ng, F.; Nicassio, M.; Niculescu, M.; Niedziela, J.; Nielsen, B. S.; Nikolaev, S.; Nikulin, S.; Nikulin, V.; Noferini, F.; Nomokonov, P.; Nooren, G.; Noris, J. C. C.; Norman, J.; Nyanin, A.; Nystrand, J.; Oeschler, H.; Oh, S.; Ohlson, A.; Okubo, T.; Olah, L.; Oleniacz, J.; Oliveira Da Silva, A. C.; Oliver, M. H.; Onderwaater, J.; Oppedisano, C.; Orava, R.; Oravec, M.; Ortiz Velasquez, A.; Oskarsson, A.; Otwinowski, J.; Oyama, K.; Ozdemir, M.; Pachmayer, Y.; Pacik, V.; Pagano, D.; Pagano, P.; Paić, G.; Pal, S. K.; Palni, P.; Pan, J.; Pandey, A. K.; Panebianco, S.; Papikyan, V.; Pappalardo, G. S.; Pareek, P.; Park, J.; Park, W. J.; Parmar, S.; Passfeld, A.; Pathak, S. P.; Paticchio, V.; Patra, R. N.; Paul, B.; Pei, H.; Peitzmann, T.; Peng, X.; Pereira, L. G.; Pereira Da Costa, H.; Peresunko, D.; Perez Lezama, E.; Peskov, V.; Pestov, Y.; Petráček, V.; Petrov, V.; Petrovici, M.; Petta, C.; Pezzi, R. P.; Piano, S.; Pikna, M.; Pillot, P.; Pimentel, L. O. D. L.; Pinazza, O.; Pinsky, L.; Piyarathna, D. B.; Płoskoń, M.; Planinic, M.; Pluta, J.; Pochybova, S.; Podesta-Lerma, P. L. M.; Poghosyan, M. G.; Polichtchouk, B.; Poljak, N.; Poonsawat, W.; Pop, A.; Poppenborg, H.; Porteboeuf-Houssais, S.; Porter, J.; Pospisil, J.; Pozdniakov, V.; Prasad, S. K.; Preghenella, R.; Prino, F.; Pruneau, C. A.; Pshenichnov, I.; Puccio, M.; Puddu, G.; Pujahari, P.; Punin, V.; Putschke, J.; Qvigstad, H.; Rachevski, A.; Raha, S.; Rajput, S.; Rak, J.; Rakotozafindrabe, A.; Ramello, L.; Rami, F.; Rana, D. B.; Raniwala, R.; Raniwala, S.; Räsänen, S. S.; Rascanu, B. T.; Rathee, D.; Ratza, V.; Ravasenga, I.; Read, K. F.; Redlich, K.; Rehman, A.; Reichelt, P.; Reidt, F.; Ren, X.; Renfordt, R.; Reolon, A. R.; Reshetin, A.; Reygers, K.; Riabov, V.; Ricci, R. A.; Richert, T.; Richter, M.; Riedler, P.; Riegler, W.; Riggi, F.; Ristea, C.; Rodríguez Cahuantzi, M.; Røed, K.; Rogochaya, E.; Rohr, D.; Röhrich, D.; Rokita, P. S.; Ronchetti, F.; Ronflette, L.; Rosnet, P.; Rossi, A.; Rotondi, A.; Roukoutakis, F.; Roy, A.; Roy, C.; Roy, P.; Rubio Montero, A. J.; Rui, R.; Russo, R.; Rustamov, A.; Ryabinkin, E.; Ryabov, Y.; Rybicki, A.; Saarinen, S.; Sadhu, S.; Sadovsky, S.; Šafařík, K.; Saha, S. K.; Sahlmuller, B.; Sahoo, B.; Sahoo, P.; Sahoo, R.; Sahoo, S.; Sahu, P. K.; Saini, J.; Sakai, S.; Saleh, M. A.; Salzwedel, J.; Sambyal, S.; Samsonov, V.; Sandoval, A.; Sarkar, D.; Sarkar, N.; Sarma, P.; Sas, M. H. P.; Scapparone, E.; Scarlassara, F.; Scharenberg, R. P.; Scheid, H. S.; Schiaua, C.; Schicker, R.; Schmidt, C.; Schmidt, H. R.; Schmidt, M. O.; Schmidt, M.; Schukraft, J.; Schutz, Y.; Schwarz, K.; Schweda, K.; Scioli, G.; Scomparin, E.; Scott, R.; Šefčík, M.; Seger, J. E.; Sekiguchi, Y.; Sekihata, D.; Selyuzhenkov, I.; Senosi, K.; Senyukov, S.; Serradilla, E.; Sett, P.; Sevcenco, A.; Shabanov, A.; Shabetai, A.; Shadura, O.; Shahoyan, R.; Shangaraev, A.; Sharma, A.; Sharma, A.; Sharma, M.; Sharma, M.; Sharma, N.; Sheikh, A. I.; Shigaki, K.; Shou, Q.; Shtejer, K.; Sibiriak, Y.; Siddhanta, S.; Sielewicz, K. M.; Siemiarczuk, T.; Silvermyr, D.; Silvestre, C.; Simatovic, G.; Simonetti, G.; Singaraju, R.; Singh, R.; Singhal, V.; Sinha, T.; Sitar, B.; Sitta, M.; Skaali, T. B.; Slupecki, M.; Smirnov, N.; Snellings, R. J. M.; Snellman, T. W.; Song, J.; Song, M.; Soramel, F.; Sorensen, S.; Sozzi, F.; Spiriti, E.; Sputowska, I.; Srivastava, B. K.; Stachel, J.; Stan, I.; Stankus, P.; Stenlund, E.; Stiller, J. H.; Stocco, D.; Strmen, P.; Suaide, A. A. P.; Sugitate, T.; Suire, C.; Suleymanov, M.; Suljic, M.; Sultanov, R.; Šumbera, M.; Sumowidagdo, S.; Suzuki, K.; Swain, S.; Szabo, A.; Szarka, I.; Szczepankiewicz, A.; Szymanski, M.; Tabassam, U.; Takahashi, J.; Tambave, G. J.; Tanaka, N.; Tarhini, M.; Tariq, M.; Tarzila, M. G.; Tauro, A.; Tejeda Muñoz, G.; Telesca, A.; Terasaki, K.; Terrevoli, C.; Teyssier, B.; Thakur, D.; Thakur, S.; Thomas, D.; Tieulent, R.; Tikhonov, A.; Timmins, A. R.; Toia, A.; Tripathy, S.; Trogolo, S.; Trombetta, G.; Trubnikov, V.; Trzaska, W. H.; Trzeciak, B. A.; Tsuji, T.; Tumkin, A.; Turrisi, R.; Tveter, T. S.; Ullaland, K.; Umaka, E. N.; Uras, A.; Usai, G. L.; Utrobicic, A.; Vala, M.; Van Der Maarel, J.; Van Hoorne, J. W.; van Leeuwen, M.; Vanat, T.; Vande Vyvre, P.; Varga, D.; Vargas, A.; Vargyas, M.; Varma, R.; Vasileiou, M.; Vasiliev, A.; Vauthier, A.; Vázquez Doce, O.; Vechernin, V.; Veen, A. M.; Velure, A.; Vercellin, E.; Vergara Limón, S.; Vernet, R.; Vértesi, R.; Vickovic, L.; Vigolo, S.; Viinikainen, J.; Vilakazi, Z.; Villalobos Baillie, O.; Villatoro Tello, A.; Vinogradov, A.; Vinogradov, L.; Virgili, T.; Vislavicius, V.; Vodopyanov, A.; Völkl, M. A.; Voloshin, K.; Voloshin, S. A.; Volpe, G.; von Haller, B.; Vorobyev, I.; Voscek, D.; Vranic, D.; Vrláková, J.; Wagner, B.; Wagner, J.; Wang, H.; Wang, M.; Watanabe, D.; Watanabe, Y.; Weber, M.; Weber, S. G.; Weiser, D. F.; Wessels, J. P.; Westerhoff, U.; Whitehead, A. M.; Wiechula, J.; Wikne, J.; Wilk, G.; Wilkinson, J.; Willems, G. A.; Williams, M. C. S.; Windelband, B.; Witt, W. E.; Yalcin, S.; Yang, P.; Yano, S.; Yin, Z.; Yokoyama, H.; Yoo, I.-K.; Yoon, J. H.; Yurchenko, V.; Zaccolo, V.; Zaman, A.; Zampolli, C.; Zanoli, H. J. C.; Zaporozhets, S.; Zardoshti, N.; Zarochentsev, A.; Závada, P.; Zaviyalov, N.; Zbroszczyk, H.; Zhalov, M.; Zhang, H.; Zhang, X.; Zhang, Y.; Zhang, C.; Zhang, Z.; Zhao, C.; Zhigareva, N.; Zhou, D.; Zhou, Y.; Zhou, Z.; Zhu, H.; Zhu, J.; Zhu, X.; Zichichi, A.; Zimmermann, A.; Zimmermann, M. B.; Zimmermann, S.; Zinovjev, G.; Zmeskal, J.

2017-06-01

The transverse momentum distributions of the strange and double-strange hyperon resonances (Σ (1385)^{± }, Ξ (1530)0) produced in p-Pb collisions at √{s_{NN}}= 5.02 TeV were measured in the rapidity range -0.5< y_{CMS}<0 for event classes corresponding to different charged-particle multiplicity densities, < dN_{ch}/dη _{lab}\\rangle . The mean transverse momentum values are presented as a function of < dN_{ch}/dη _{lab}\\rangle , as well as a function of the particle masses and compared with previous results on hyperon production. The integrated yield ratios of excited to ground-state hyperons are constant as a function of < dN_{ch}/dη _{lab}\\rangle . The equivalent ratios to pions exhibit an increase with < dN_{ch}/dη _{lab}\\rangle , depending on their strangeness content.

Production of $${\\Sigma (1385)^{\\pm }}$$ and $${\\Xi (1530)^{0}}$$ in p–Pb collisions at $${\\sqrt{s_{\\mathrm{NN}}}= 5.02}$$ TeV

DOE PAGES

Adamová, D.; Aggarwal, M. M.; Aglieri Rinella, G.; ...

2017-06-13

The transverse momentum distributions of the strange and double-strange hyperon resonances (Σ(1385) ±, Ξ(1530) 0) produced in p–Pb collisions at √ sNN = 5.02 TeV were measured in the rapidity range –0.5 < y CMS < 0 for event classes corresponding to different charged-particle multiplicity densities, < dN ch/dη lab >. The mean transverse momentum values are presented as a function of < dN ch/dη lab >, as well as a function of the particle masses and compared with previous results on hyperon production. The integrated yield ratios of excited to ground-state hyperons are constant as a function of . The equivalent ratios to pions exhibit an increase with < dN ch/dη lab >, depending on their strangeness content.« less

Production of $${\\Sigma (1385)^{\\pm }}$$ and $${\\Xi (1530)^{0}}$$ in p–Pb collisions at $${\\sqrt{s_{\\mathrm{NN}}}= 5.02}$$ TeV

DOE Office of Scientific and Technical Information (OSTI.GOV)

Adamová, D.; Aggarwal, M. M.; Aglieri Rinella, G.

The transverse momentum distributions of the strange and double-strange hyperon resonances (Σ(1385) ±, Ξ(1530) 0) produced in p–Pb collisions at √ sNN = 5.02 TeV were measured in the rapidity range –0.5 < y CMS < 0 for event classes corresponding to different charged-particle multiplicity densities, < dN ch/dη lab >. The mean transverse momentum values are presented as a function of < dN ch/dη lab >, as well as a function of the particle masses and compared with previous results on hyperon production. The integrated yield ratios of excited to ground-state hyperons are constant as a function of . The equivalent ratios to pions exhibit an increase with < dN ch/dη lab >, depending on their strangeness content.« less

Development of the Coastal Storm Modeling System (CoSMoS) for predicting the impact of storms on high-energy, active-margin coasts

USGS Publications Warehouse

Barnard, Patrick; Maarten van Ormondt,; Erikson, Li H.; Jodi Eshleman,; Hapke, Cheryl J.; Peter Ruggiero,; Peter Adams,; Foxgrover, Amy C.

2014-01-01

The Coastal Storm Modeling System (CoSMoS) applies a predominantly deterministic framework to make detailed predictions (meter scale) of storm-induced coastal flooding, erosion, and cliff failures over large geographic scales (100s of kilometers). CoSMoS was developed for hindcast studies, operational applications (i.e., nowcasts and multiday forecasts), and future climate scenarios (i.e., sea-level rise + storms) to provide emergency responders and coastal planners with critical storm hazards information that may be used to increase public safety, mitigate physical damages, and more effectively manage and allocate resources within complex coastal settings. The prototype system, developed for the California coast, uses the global WAVEWATCH III wave model, the TOPEX/Poseidon satellite altimetry-based global tide model, and atmospheric-forcing data from either the US National Weather Service (operational mode) or Global Climate Models (future climate mode), to determine regional wave and water-level boundary conditions. These physical processes are dynamically downscaled using a series of nested Delft3D-WAVE (SWAN) and Delft3D-FLOW (FLOW) models and linked at the coast to tightly spaced XBeach (eXtreme Beach) cross-shore profile models and a Bayesian probabilistic cliff failure model. Hindcast testing demonstrates that, despite uncertainties in preexisting beach morphology over the ~500 km alongshore extent of the pilot study area, CoSMoS effectively identifies discrete sections of the coast (100s of meters) that are vulnerable to coastal hazards under a range of current and future oceanographic forcing conditions, and is therefore an effective tool for operational and future climate scenario planning.

Hurricane-induced Sediment Transport and Morphological Change in Jamaica Bay, New York

NASA Astrophysics Data System (ADS)

Hu, K.; Chen, Q. J.

2016-02-01

Jamaica Bay is located in Brooklyn and Queens, New York on the western end of the south shore of the Long Island land mass. It experienced a conversion of more than 60% of the vegetated salt-marsh islands to intertidal and subtidal mudflats. Hurricanes and nor'easters are among the important driving forces that reshape coastal landscape quickly and affect wetland sustainability. Wetland protection and restoration need a better understanding of hydrodynamics and sediment transport in this area, especially under extreme weather conditions. Hurricane Sandy, which made landfall along east coast on October 30, 2012, provides a critical opportunity for studying the impacts of hurricanes on sedimentation, erosion and morphological changes in Jamaica Bay and salt marsh islands. The Delft3D model suit was applied to model hydrodynamics and sediment transport in Jamaica Bay and salt marsh islands. Three domains were set up for nesting computation. The local domain covering the bay and salt marshes has a resolution of 10 m. The wave module was online coupled with the flow module. Vegetation effects were considered as a large number of rigid cylinders by a sub-module in Delft3D. Parameters in sediment transport and morphological change were carefully chosen and calibrated. Prior- and post-Sandy Surface Elevation Table (SET)/accretion data including mark horizon (short-term) and 137Cs and 210Pb (long-term) at salt marsh islands in Jamaica Bay were used for model validation. Model results indicate that waves played an important role in hurricane-induced morphological change in Jamaica Bay and wetlands. In addition, numerical experiments were carried out to investigate the impacts of hypothetic hurricanes. This study has been supported by the U.S. Geological Survey Hurricane Sandy Disaster Recovery Act Funds.

Comparative Sediment Transport Between Exposed and Reef Protected Beaches Under Different Hurricane Conditions

NASA Astrophysics Data System (ADS)

Miret, D.; Enriquez, C.; Marino-Tapia, I.

2016-12-01

Many world coast regions are subjected to tropical cyclone activity, which can cause major damage to beaches and infrastructure on sediment dominated coasts. The Caribbean Sea has on average 4 hurricanes per year, some of them have caused major damage to coastal cities in the past 25 years. For example, Wilma, a major hurricane that hit SE Mexico in October 2005 generated strong erosion at an exposed beach (Cancun), while beach accretion was observed 28 km south at a fringing reef protected beach (Puerto Morelos). Hurricanes with similar intensity and trajectory but different moving speeds have been reported to cause a different morphological response. The present study analyses the morphodynamic response to the hydrodynamic conditions of exposed and reef protected beaches, generated by hurricanes with similar intensities but different trajectories and moving speeds. A non-stationary Delft3D Wave model is used to generate large scale wind swell conditions and local sea wind states and coupled with Delft3D Flow model to study the connection between the continental shelf and surf zones exchanges. The model is validated with hydrodynamic data gathered during Wilma, and morphological conditions measured before and after the event. Preliminary results show that erosion appears at the exposed beach and a predominant exchange between north and south dominates the shelf sediment transport (figure 1). Onshore driven flows over the reef crest input sediment in the reef protected beach. It is expected that for a same track but faster moving speed, southward sediment transport will have less time to develop and accretion at the reef protected site would be less evident or inexistent. The study can be used as a prediction tool for shelf scale sediment transport exchange driven by hurricanes.

Assessment of a numerical model to reproduce event‐scale erosion and deposition distributions in a braided river

PubMed Central

Measures, R.; Hicks, D. M.; Brasington, J.

2016-01-01

Abstract Numerical morphological modeling of braided rivers, using a physics‐based approach, is increasingly used as a technique to explore controls on river pattern and, from an applied perspective, to simulate the impact of channel modifications. This paper assesses a depth‐averaged nonuniform sediment model (Delft3D) to predict the morphodynamics of a 2.5 km long reach of the braided Rees River, New Zealand, during a single high‐flow event. Evaluation of model performance primarily focused upon using high‐resolution Digital Elevation Models (DEMs) of Difference, derived from a fusion of terrestrial laser scanning and optical empirical bathymetric mapping, to compare observed and predicted patterns of erosion and deposition and reach‐scale sediment budgets. For the calibrated model, this was supplemented with planform metrics (e.g., braiding intensity). Extensive sensitivity analysis of model functions and parameters was executed, including consideration of numerical scheme for bed load component calculations, hydraulics, bed composition, bed load transport and bed slope effects, bank erosion, and frequency of calculations. Total predicted volumes of erosion and deposition corresponded well to those observed. The difference between predicted and observed volumes of erosion was less than the factor of two that characterizes the accuracy of the Gaeuman et al. bed load transport formula. Grain size distributions were best represented using two φ intervals. For unsteady flows, results were sensitive to the morphological time scale factor. The approach of comparing observed and predicted morphological sediment budgets shows the value of using natural experiment data sets for model testing. Sensitivity results are transferable to guide Delft3D applications to other rivers. PMID:27708477

Predicting impact of SLR on coastal flooding in Banda Aceh coastal defences

NASA Astrophysics Data System (ADS)

Al'ala, Musa; Syamsidik, Kato, Shigeru

2017-10-01

Banda Aceh is a low-lying city located at the northern tip of Sumatra Island and situated at the conjuncture of Malacca Strait and the Andaman Sea. A Sea Level Rise (SLR) rate at 7 mm/year has been observed around this region. In the next 50 years, this city will face a serious challenge to encounter impacts of the sea level rise, such as frequent coastal floodings. This study is aimed at estimating impacts of the sea level rise induced coastal floodings on several types of coastal structures and city drainage system. Numerical simulations of Delft3D were applied to investigate the influence of the gradual sea level rise in 50 years. The hydrodynamic process of coastal flooding and sediment transport were simulated by Delft3D-Flow. Topography and bathymetry data were collected from GEBCO and updated with the available nautical chart (DISHIDROS, JICA, and field measurements). Hydrodynamic process gains the flow process revealing the level of the sea water intrusion also observed in the model. Main rivers (Krueng Aceh, Krueng Neng, and Alue Naga Flood Canal) and the drainage system were observed to see the tides effects on coastal structures and drainage system. The impact on coastal community focusing on affected area, shoreline retreat, the rate of sea intrusion was analyzed with spatial tools. New coastal line, coastal flooding vulnerable area, and the community susceptibility properties map influenced by 50 years sea level rise is produced. This research found that the city needs to address strategies to anticipate the exacerbating impacts of the sea level rise by managing its coastal spatial planning and modify its drainage system, especially at the drainage outlets.

Investigating sea bed morphology of an estuary located in the western coast of India

NASA Astrophysics Data System (ADS)

Chowdhury, P.; Behera, M. R.; Ranjan, P.

2016-02-01

Estuaries and tidal inlets are complex natural systems. They form a vital ecosystem and host a plethora of diverse flora and fauna. The major problem associated with them is that they experience both climate effects and human interference in different spatial and temporal scales. The increasing threats of sea level variability and changes in the other ocean parameters like currents, waves, winds and tidal ranges may cause these inlets to behave differently. Mandovi - Zuari is one such complex inlet situated in the western coast of India. It is a major tourist attraction and a home to dense mangrove forest. It experiences mixed tides (mainly semi-diurnal in nature). Also the salinity of this region tends to change seasonally. The annual evolution in morphology of this region is of importance as the sediment transport in this area plays an important role in determining the beach morphology of the adjacent beaches. Tourism being the most important economic driver of this state, it is important to assess the possible changes in the beach morphology over the coming decades. A state-of-the-art process based model, Delft 3D, is used to calculate the annual sediment transport with a focus to understand the morphological evolution history of this inlet. In this regard a hydrodynamic analysis of the region is carried out by forcing a composite tide at the offshore boundary of the model domain to obtain the tidal levels and currents. The sea bed contours are obtained with the help of admiralty charts. For estimating the sediment transport, Van Rijn formula is used as found in the sediment module of Delft 3D. The morphological changes along the coast of Goa, India is estimated and the locations of accretion and erosion are identified.

Storm Surge Modeling of Typhoon Haiyan at the Naval Oceanographic Office Using Delft3D

NASA Astrophysics Data System (ADS)

Gilligan, M. J.; Lovering, J. L.

2016-02-01

The Naval Oceanographic Office provides estimates of the rise in sea level along the coast due to storm surge associated with tropical cyclones, typhoons, and hurricanes. Storm surge modeling and prediction helps the US Navy by providing a threat assessment tool to help protect Navy assets and provide support for humanitarian assistance/disaster relief efforts. Recent advancements in our modeling capabilities include the use of the Delft3D modeling suite as part of a Naval Research Laboratory (NRL) developed Coastal Surge Inundation Prediction System (CSIPS). Model simulations were performed on Typhoon Haiyan, which made landfall in the Philippines in November 2013. Comparisons of model simulations using forecast and hindcast track data highlight the importance of accurate storm track information for storm surge predictions. Model runs using the forecast track prediction and hindcast track information give maximum storm surge elevations of 4 meters and 6.1 meters, respectively. Model results for the hindcast simulation were compared with data published by the JSCE-PICE Joint survey for locations in San Pedro Bay (SPB) and on the Eastern Samar Peninsula (ESP). In SPB, where wind-induced set-up predominates, the model run using the forecast track predicted surge within 2 meters in 38% of survey locations and within 3 meters in 59% of the locations. When the hindcast track was used, the model predicted within 2 meters in 77% of the locations and within 3 meters in 95% of the locations. The model was unable to predict the high surge reported along the ESP produced by infragravity wave-induced set-up, which is not simulated in the model. Additional modeling capabilities incorporating infragravity waves are required to predict storm surge accurately along open coasts with steep bathymetric slopes, such as those seen in island arcs.

Assessment of a numerical model to reproduce event-scale erosion and deposition distributions in a braided river.

PubMed

Williams, R D; Measures, R; Hicks, D M; Brasington, J

2016-08-01

Numerical morphological modeling of braided rivers, using a physics-based approach, is increasingly used as a technique to explore controls on river pattern and, from an applied perspective, to simulate the impact of channel modifications. This paper assesses a depth-averaged nonuniform sediment model (Delft3D) to predict the morphodynamics of a 2.5 km long reach of the braided Rees River, New Zealand, during a single high-flow event. Evaluation of model performance primarily focused upon using high-resolution Digital Elevation Models (DEMs) of Difference, derived from a fusion of terrestrial laser scanning and optical empirical bathymetric mapping, to compare observed and predicted patterns of erosion and deposition and reach-scale sediment budgets. For the calibrated model, this was supplemented with planform metrics (e.g., braiding intensity). Extensive sensitivity analysis of model functions and parameters was executed, including consideration of numerical scheme for bed load component calculations, hydraulics, bed composition, bed load transport and bed slope effects, bank erosion, and frequency of calculations. Total predicted volumes of erosion and deposition corresponded well to those observed. The difference between predicted and observed volumes of erosion was less than the factor of two that characterizes the accuracy of the Gaeuman et al. bed load transport formula. Grain size distributions were best represented using two φ intervals. For unsteady flows, results were sensitive to the morphological time scale factor. The approach of comparing observed and predicted morphological sediment budgets shows the value of using natural experiment data sets for model testing. Sensitivity results are transferable to guide Delft3D applications to other rivers.

Low plasma levels of cholecalciferol and 13-cis-retinoic acid in tuberculosis: implications in host-based chemotherapy.

PubMed

Srinivasan, Anand; Syal, Kirtimaan; Banerjee, Dibyajyoti; Hota, Debasish; Gupta, Dheeraj; Kaul, Deepak; Chakrabarti, Amitava

2013-10-01

The aim of this study was to estimate the concentration of cholecalciferol and 13-cis-retinoic acid (RA) in the plasma and pleural fluid of patients with tuberculosis (TB) against controls. Plasma levels of cholecalciferol and 13-cis-RA were measured in 22 patients with TB and healthy controls and their pleural fluids levels were measured in 6 TB patients and diseased controls by established high-performance liquid chromatography-based procedure. Cholecalciferol levels in plasma and pleural fluid of patients with TB and healthy controls were 67.45 (10.71) nmol/L and 21.40 (8.58) nmol/L compared with 117.43 (18.40) nmol/L (P < 0.001) and 94.73 (33.34) nmol/L (P = 0.0049), respectively. 13-cis-RA level in the plasma of patients with TB and healthy controls were 1.51 (0.72) nmol/L and 6.67 (0.81) nmol/L (P < 0.001), respectively. 13-cis-RA was not detectable in pleural fluid. The levels of both the agents were lower in patients with TB than in controls. It was observed that in patients with TB there is a combined deficiency of cholecalciferol and 13-cis-RA compared with healthy volunteers. Because cholecalciferol and 13-cis-RA are in equilibrium with active ingredients of vitamins A and D, we feel that there is a combined deficiency of these vitamins in patients with TB. There is an evidence that concomitant vitamin A and D supplementation can kill intracellular Mycobacterium tuberculosis in vitro. Therefore, the observations made in this study can pave the path for a trial of combined supplementation of available formulations of vitamin A and D (cholecalciferol and 13-cis-RA) for novel anti-tubercular drug therapy. Because such an approach is host-based it has potential to treat even multidrug-resistant and extensively drug-resistant forms of TB. Copyright © 2013 Elsevier Inc. All rights reserved.

Inductance Scaling of a Helicoil Using ALEGRA

DTIC Science & Technology

2013-05-01

HOUSKAMP 3 US ARMY RESEARCH LAB RDRL WMP E P BARTKOWSKI D HORNBAKER P SWOBODA 1 US ARMY RESEARCH LAB RDRL WMP F N GNIAZDOWSKI 1 US ARMY RESEARCH LAB RDRL...HAILL 1 UNIVERSITY OF ALABAMA AT BIRMINGHAM D LITTLEFIELD 1 DEFENSE RESEARCH AGENCY B JAMES 2 ENIG ASSOCIATES, INC. E ENIG D BENTZ 42 ...January 2012 Inductance Scaling of a Helicoil Using ALEGRA Robert Doney U.S. Army Research Laboratory ATTN: RDRL-WMP- D Aberdeen Proving Ground, MD 21005

3D-Lab: a collaborative web-based platform for molecular modeling.

PubMed

Grebner, Christoph; Norrby, Magnus; Enström, Jonatan; Nilsson, Ingemar; Hogner, Anders; Henriksson, Jonas; Westin, Johan; Faramarzi, Farzad; Werner, Philip; Boström, Jonas

2016-09-01

The use of 3D information has shown impact in numerous applications in drug design. However, it is often under-utilized and traditionally limited to specialists. We want to change that, and present an approach making 3D information and molecular modeling accessible and easy-to-use 'for the people'. A user-friendly and collaborative web-based platform (3D-Lab) for 3D modeling, including a blazingly fast virtual screening capability, was developed. 3D-Lab provides an interface to automatic molecular modeling, like conformer generation, ligand alignments, molecular dockings and simple quantum chemistry protocols. 3D-Lab is designed to be modular, and to facilitate sharing of 3D-information to promote interactions between drug designers. Recent enhancements to our open-source virtual reality tool Molecular Rift are described. The integrated drug-design platform allows drug designers to instantaneously access 3D information and readily apply advanced and automated 3D molecular modeling tasks, with the aim to improve decision-making in drug design projects.

DoD Research Labs 101: Who They Are, What They Do | DoDLive

Science.gov Websites

Corner Behind the Lens DoD Research Labs 101: Who They Are, What They Do Posted on March 24, 2016 by service branch has several research labs across the country that focus on specific technologies. I could just going to fill you in on what each of the main labs does and give some examples of the cool things

Hyperproduction of sebaceous cis-6-hexadecenoic acid by esterase-reduced mutant of Rhodococcus sp. strain.

PubMed

Araki, Hiroyuki; Hagihara, Hiroshi; Takigawa, Hirofumi; Kotani, Nobuharu; Tsujino, Yukiharu; Koike, Kenzo; Kawai, Shuji; Ozaki, Katsuya; Ito, Susumu

2007-10-01

cis-6-Hexadecenoic acid is a major component of human sebaceous lipids that is involved in skin self-sterilization and atopic dermatitis amelioration. It can be prepared by hydrolysis of isopropyl cis-6-hexadecenoate produced by resting cells of Rhodococcus sp. strain KSM-MT66. To devise an economical industrial-scale process for the production of this rare fatty acid, we optimized the conditions for growing rhodococcal cells. Mg(2+) and Fe(2+) ions are essential for the efficient production of isopropyl cis-6-hexadecenoate. To further increase the production of isopropyl cis-6-hexadecenoate, we created a mutant strain (T64) with reduced esterase activity by random mutagenesis using UV irradiation of MT66. Under an optimized condition, the mutant T64 produced more than 60 g l(-1) isopropyl cis-6-hexadecenoate in a 4-d cultivation, corresponding to about 52 g l(-1)cis-6-hexadecenoate.

Low-Temperature Chemiluminescence From cis-1,4-Polybutadiene, 1,2-Polybutadiene, and trans-Polypentenamer at Temperatures Near Ambient

NASA Technical Reports Server (NTRS)

Nathan, Richard A.; Mendenhall, G. David; Birts, Michelle A.; Ogle, Craig A.; Golub, Morton A.

1978-01-01

The chemiluminescence emission at 25-60 C was measured from films of cis-1,4-polybutadiene, 1,2-polybutadiene, and trans-polypentenamer. The polymers were autoxidized previously in air 100 C, or allowed to react with singlet molecular oxygen in solution, and then cast into films. Values of beta(or k(sub d,((1)O2 yields (3)03)/k(sub r)((1)O2 + polymer yields products)) were determined in benzene for cis-1,4-polybutadiene and cis-1,4-polyisoprene, and for model compounds cis-3-hexene and cis-3-methyl-3-hexene by independent methods. The chemiluminescence emission from irradiated films of the polymers containing a dye sensitizer showed a complicated time dependence, and the results depended on the length of irradiation.

Modelling and Forecasting of Rice Yield in support of Crop Insurance

NASA Astrophysics Data System (ADS)

Weerts, A.; van Verseveld, W.; Trambauer, P.; de Vries, S.; Conijn, S.; van Valkengoed, E.; Hoekman, D.; Hengsdijk, H.; Schrevel, A.

2016-12-01

The Government of Indonesia has embarked on a policy to bring crop insurance to all of Indonesia's farmers. To support the Indonesian government, the G4INDO project (www.g4indo.org) is developing/constructing an integrated platform for judging and handling insurance claims. The platform consists of bringing together remote sensed data (both visible and radar) and hydrologic and crop modelling and forecasting to improve predictions in one forecasting platform (i.e. Delft-FEWS, Werner et al., 2013). The hydrological model and crop model (LINTUL) are coupled on time stepping basis in the OpenStreams framework (see https://github.com/openstreams/wflow) and deployed in a Delft-FEWS forecasting platform to support seasonal forecasting of water availability and crop yield. First we will show the general idea about the project, the integrated platform (including Sentinel 1 & 2 data) followed by first (reforecast) results of the coupled models for predicting water availability and crop yield in the Brantas catchment in Java, Indonesia. Werner, M., Schellekens, J., Gijsbers, P., Van Dijk, M., Van den Akker, O. and Heynert K, 2013. The Delft-FEWS flow forecasting system, Environmental Modelling & Software; 40:65-77. DOI: 10.1016/j.envsoft.2012.07.010 .

Examination of the persistency of milk fatty acid composition responses to fish oil and sunflower oil in the diet of dairy cows.

PubMed

Shingfield, K J; Reynolds, C K; Hervás, G; Griinari, J M; Grandison, A S; Beever, D E

2006-02-01

Based on the potential benefits of cis-9, trans-11 conjugated linoleic acid (CLA) for human health, there is a need to develop effective strategies for enhancing milk fat CLA concentrations. Levels of cis-9, trans-11 CLA in milk can be increased by supplements of fish oil (FO) and sunflower oil (SO), but there is considerable variation in the response. Part of this variance may reflect time-dependent ruminal adaptations to high levels of lipid in the diet, which lead to alterations in the formation of specific biohydrogenation intermediates. To test this hypothesis, 16 late lactation Holstein-British Friesian cows were used in a repeated measures randomized block design to examine milk fatty acid composition responses to FO and SO in the diet over a 28-d period. Cows were allocated at random to corn silage-based rations (8 per treatment) containing 0 (control) or 45 g of oil supplement/kg of dry matter consisting (1:2; wt/wt) of FO and SO (FSO), and milk composition was determined on alternate days from d 1. Compared with the control, the FSO diet decreased mean dry matter intake (21.1 vs. 17.9 kg/d), milk fat (47.7 vs. 32.6 g/kg), and protein content (36.1 vs. 33.3 g/kg), but had no effect on milk yield (27.1 vs. 26.4 kg/d). Reductions in milk fat content relative to the FSO diet were associated with increases in milk trans-10 18:1, trans-10, cis-12 CLA, and trans-9, cis-11 CLA concentrations (r(2) = 0.74, 0.57, and 0.80, respectively). Compared with the control, the FSO diet reduced milk 4:0 to 18:0 and cis 18:1 content and increased trans 18:1, trans 18:2, cis-9, trans-11 CLA, 20:5 n-3, and 22:6 n-3 concentrations. The FSO diet caused a rapid elevation in milk cis-9, trans-11 CLA content, reaching a maximum of 5.37 g/100 g of fatty acids on d 5, but these increases were transient, declining to 2.35 g/100 g of fatty acids by d 15. They remained relatively constant thereafter. Even though concentrations of trans-11 18:1 followed the same pattern of temporal changes as cis-9, trans-11 CLA, the total trans 18:1 content of FSO milk was unchanged because of the concomitant increases in the concentration of other isomers (Delta(4-10) and Delta(12-15)), predominantely trans-10 18:1. In conclusion, supplementing diets with FSO enhances milk fat cis-9, trans-11 CLA content, but the high level of enrichment declines because of changes in ruminal biohydrogenation that result in trans-10 replacing trans-11 as the major 18:1 biohydrogenation intermediate formed in the rumen.

Biophysical Characterization of an Bifunctional Iron Regulating Enzyme

DTIC Science & Technology

2002-05-01

of the direct assay 29 Citrate, cis- aconitate and d- isocitrate all absorb light in the UV-Vis region, a fact which was confirmed...experimentally using a Hewlard-Packard 8452 Diode UV-Vis Diode Array Spectrophotometer. The maximum absorbance of cis- aconitate was determined to be 240 nm...and isocitrate was 212 nm. The preponderance of cis- aconitate concentration versus the formation of isocitrate concentration made tracking a

Water-stable helical structure of tertiary amides of bicyclic β-amino acid bearing 7-azabicyclo[2.2.1]heptane. Full control of amide cis-trans equilibrium by bridgehead substitution.

PubMed

Hosoya, Masahiro; Otani, Yuko; Kawahata, Masatoshi; Yamaguchi, Kentaro; Ohwada, Tomohiko

2010-10-27

Helical structures of oligomers of non-natural β-amino acids are significantly stabilized by intramolecular hydrogen bonding between main-chain amide moieties in many cases, but the structures are generally susceptible to the environment; that is, helices may unfold in protic solvents such as water. For the generation of non-hydrogen-bonded ordered structures of amides (tertiary amides in most cases), control of cis-trans isomerization is crucial, even though there is only a small sterical difference with respect to cis and trans orientations. We have established methods for synthesis of conformationally constrained β-proline mimics, that is, bridgehead-substituted 7-azabicyclo[2.2.1]heptane-2-endo-carboxylic acids. Our crystallographic, 1D- and 2D-NMR, and CD spectroscopic studies in solution revealed that a bridgehead methoxymethyl substituent completely biased the cis-trans equilibrium to the cis-amide structure along the main chain, and helical structures based on the cis-amide linkage were generated independently of the number of residues, from the minimalist dimer through the tetramer, hexamer, and up to the octamer, and irrespective of the solvent (e.g., water, alcohol, halogenated solvents, and cyclohexane). Generality of the control of the amide equilibrium by bridgehead substitution was also examined.

Organization and control of genes encoding catabolic enzymes in Rhizobiaceae. Progress report, March 1993

DOE Office of Scientific and Technical Information (OSTI.GOV)

Parke, D.; Ornston, L.N.

1993-03-01

Rhizobiaceae, a diverse bacterial group comprising rhizobia and agrobacteria, symbiotic partnership with plants form nitrogen-fixing nodules on plant roots or are plant pathogens. Phenolic compounds produced by plants serve as inducers of rhizobial nodulation genes and agrobacterial virulence genes reflect their capacity to utilize numerous aromatics, including phenolics, as a source of carbon and energy. In many microbes the aerobic degradation of numerous aromatic compounds to tricarboxylic acid cycle intermediates is achieved by the {beta}-ketoadipate pathway. Our initial studies focused on the organization and regulation of the ketoadipate pathway in Agrobacterium tumefaciens. We have cloned, identified and characterized a novelmore » regulatory gene that modulates expression of an adjacent pca (protocatechuate) structural gene, pcaD. Regulation of pcaD is mediated by the regulatory gene, termed pcaQ, in concert with the intermediate {beta}-carboxy-cis,cis-muconate. {beta}-carboxy-cis,cismuconate is an unstable chemical, not marketed commercially, and it is unlikely to permeate Escherichia coli cells if supplied in media. Because of these factors, characterization of pcaQ in E. coli required an in vivo delivery system for {beta}-carboxycis,cis-muconate. This was accomplished by designing an E. coli strain that expressed an Acinetobacter calcoaceticus pcaA gene for conversion of protocatechuate to {beta}-carboxy-cis,cis-muconate.« less

Organization and control of genes encoding catabolic enzymes in Rhizobiaceae

DOE Office of Scientific and Technical Information (OSTI.GOV)

Parke, D.; Ornston, L.N.

1993-03-01

Rhizobiaceae, a diverse bacterial group comprising rhizobia and agrobacteria, symbiotic partnership with plants form nitrogen-fixing nodules on plant roots or are plant pathogens. Phenolic compounds produced by plants serve as inducers of rhizobial nodulation genes and agrobacterial virulence genes reflect their capacity to utilize numerous aromatics, including phenolics, as a source of carbon and energy. In many microbes the aerobic degradation of numerous aromatic compounds to tricarboxylic acid cycle intermediates is achieved by the [beta]-ketoadipate pathway. Our initial studies focused on the organization and regulation of the ketoadipate pathway in Agrobacterium tumefaciens. We have cloned, identified and characterized a novelmore » regulatory gene that modulates expression of an adjacent pca (protocatechuate) structural gene, pcaD. Regulation of pcaD is mediated by the regulatory gene, termed pcaQ, in concert with the intermediate [beta]-carboxy-cis,cis-muconate. [beta]-carboxy-cis,cismuconate is an unstable chemical, not marketed commercially, and it is unlikely to permeate Escherichia coli cells if supplied in media. Because of these factors, characterization of pcaQ in E. coli required an in vivo delivery system for [beta]-carboxycis,cis-muconate. This was accomplished by designing an E. coli strain that expressed an Acinetobacter calcoaceticus pcaA gene for conversion of protocatechuate to [beta]-carboxy-cis,cis-muconate.« less

Global scale predictability of floods

NASA Astrophysics Data System (ADS)

Weerts, Albrecht; Gijsbers, Peter; Sperna Weiland, Frederiek

2016-04-01

Flood (and storm surge) forecasting at the continental and global scale has only become possible in recent years (Emmerton et al., 2016; Verlaan et al., 2015) due to the availability of meteorological forecast, global scale precipitation products and global scale hydrologic and hydrodynamic models. Deltares has setup GLOFFIS a research-oriented multi model operational flood forecasting system based on Delft-FEWS in an open experimental ICT facility called Id-Lab. In GLOFFIS both the W3RA and PCRGLOB-WB model are run in ensemble mode using GEFS and ECMWF-EPS (latency 2 days). GLOFFIS will be used for experiments into predictability of floods (and droughts) and their dependency on initial state estimation, meteorological forcing and the hydrologic model used. Here we present initial results of verification of the ensemble flood forecasts derived with the GLOFFIS system. Emmerton, R., Stephens, L., Pappenberger, F., Pagano, T., Weerts, A., Wood, A. Salamon, P., Brown, J., Hjerdt, N., Donnelly, C., Cloke, H. Continental and Global Scale Flood Forecasting Systems, WIREs Water (accepted), 2016 Verlaan M, De Kleermaeker S, Buckman L. GLOSSIS: Global storm surge forecasting and information system 2015, Australasian Coasts & Ports Conference, 15-18 September 2015,Auckland, New Zealand.

The Regulation of Aldehyde Oxidase in Imaginal Wing Discs of Drosophila Hybrids: Evidence for cis- and trans-Acting Control Elements

PubMed Central

Sprey, Th. E.; Kuhn, David T.

1987-01-01

The aldehyde oxidase (Aldox) distribution pattern was determined for wing discs of partial hybrids between D. melanogaster and D. simulans. In these animals the regulation of Aldox activity is not uniform over the disc epithelium as both cis-dominant and trans -acting control were evident in different regions of the disc. The Aldox expression was shown to be regulated by loci on the X chromosome, 2L and 3R of D. melanogaster and 2R and 3R of D. simulans. PMID:17246366

Two streptothricins with a cis-streptolidine lactam moiety from Streptomyces sp. I08A 1776.

PubMed

Gan, Maoluo; Guan, Yan; Zheng, Xudong; Yang, Yanhui; Hao, Xueqin; Liu, Yishuang; Yu, Liyan; Xiao, Chunling

2012-10-01

Two unique cis-fused streptothricins (1 and 2) were isolated from the culture broth of Streptomyces sp. I08A 1776. Their structures were determined by MS, CD, and 1D and 2D NMR spectroscopic data analysis. Compound 2 showed weak antibacterial activities against Bacillus subtilis and Enterococcus faecalis with MIC values of 32 and 64 μg ml(-1), respectively.

Complexes of cis-dioxomolybdenum(VI) and oxovanadium(IV) with a tridentate ONS donor ligand: Synthesis, spectroscopic properties, X-ray crystal structure and catalytic activity

NASA Astrophysics Data System (ADS)

Fayed, Ahmed M.; Elsayed, Shadia A.; El-Hendawy, Ahmed M.; Mostafa, Mohamed R.

2014-08-01

New cis-dioxomolybdenum(VI) and oxovanadium(IV) complexes of the Schiff base, derived from S-methyl dithiocarbazate and 2,3-dihydroxybenzaldehyde (H2dhsm), have been synthesized. The complexes of the type cis-[MoO2(dhsm)] (1a), cis-[MoO2(dhsm)(D)] (1b-1d) [D = neutral monodentate ligand; EtOH, pyridine (py) or imidazole (imz)], [VO(dhsm)(Nsbnd N)] (2a, 2b) [Nsbnd N = 2,2‧-bipyridine (bipy) or 1,10-phenanthroline (phen)] and [VO(dhsm)] (2c) have been isolated, characterized by 1H NMR, IR, UV-Vis and EPR spectral studies and investigated by cyclic voltammetry. The X-ray crystal structure of cis-[MoO2(dhsm)(EtOH)] (1b) has been determined and shows that the complex has a distorted octahedral geometry in which the H2dhsm behaves as a dianionic ONS tridentate ligand coordinating via phenoxide oxygen, hydrazinic nitrogen and thiolate sulfur. The oxomolybdenum(IV) complex [MoO(dhsm)] (1e) has obtained from dioxomolybdenum(VI) complex (1b) by oxo abstraction with PPh3. The reactivity of the complexes toward catalytic oxidation of alcohols in the presence of H2O2 and t-BuOOH as co-oxidants under solvent free conditions is reported.

Phase I dose-escalation study of copanlisib in combination with gemcitabine or cisplatin plus gemcitabine in patients with advanced cancer.

PubMed

Kim, R D; Alberts, S R; Peña, C; Genvresse, I; Ajavon-Hartmann, A; Xia, C; Kelly, A; Grilley-Olson, J E

2018-02-20

Copanlisib is a pan-class I phosphatidylinositol 3-kinase (PI3K) inhibitor with predominant PI3K-α/δ activity that has demonstrated clinical activity and manageable safety when administered as monotherapy in a phase II study. Combination therapy may overcome compensatory signalling that could occur with PI3K pathway inhibition, resulting in enhanced inhibitory activity, and preclinical studies of copanlisib with gemcitabine have demonstrated potent anti-tumour activity in vivo. A phase I, open-label, dose-escalation study to evaluate the safety, tolerability and recommended phase II dose (RP2D) of copanlisib with gemcitabine or with cisplatin plus gemcitabine (CisGem) in patients with advanced malignancies, including an expansion cohort in patients with biliary tract cancer (BTC) at the RP2D of copanlisib plus CisGem. Copanlisib and gemcitabine were administered on days 1, 8 and 15 of a 28-day cycle; maximum tolerated dose (MTD) and RP2D of copanlisib were determined. Copanlisib plus CisGem was administered on days 1 and 8 of a 21-day cycle; pharmacokinetics and biomarkers were assessed. Fifty patients received treatment as follows: dose-escalation cohorts, n=16; copanlisib plus CisGem cohort, n=14; and BTC expansion cohort, n=20. Copanlisib 0.8 mg kg -1 plus gemcitabine was the MTD and RP2D for both combinations. Common treatment-emergent adverse events included nausea (86%), hyperglycaemia (80%) and decreased platelet count (80%). Copanlisib exposure displayed a dose-proportional increase. No differences were observed upon co-administration of CisGem. Response rates were as follows: copanlisib plus gemcitabine, 6.3% (one partial response in a patient with peritoneal carcinoma); copanlisib plus CisGem, 12% (one complete response and three partial responses all in patients with BTC (response rate 17.4% in patients with BTC)). Mutations were detected in PIK3CA (1 out of 43), KRAS (10 out of 43) and BRAF (2 out of 22), with phosphate and tensin homologue protein loss in 41% (12 out of 29). Copanlisib plus CisGem demonstrated a manageable safety profile, favourable pharmacokinetics, and potentially promising clinical response.

A survey of ab initio conical intersections for the H+H2 system

NASA Astrophysics Data System (ADS)

Halász, Gábor; Vibók, Ágnes; Mebel, Alexander M.; Baer, Michael

2003-02-01

In this article we present a survey of the various conical intersections which govern potential transitions between the three lower electronic states for the title molecular system. It was revealed that these three states, for a given fixed HH distance, RHH, usually form four conical intersections: two, between the two lower states and two, between the two upper states. One of the four is the well known equilateral D3h ci and the others are, essentially, C2v cis: One of them is located on the symmetry line perpendicular to the HH axis (just like the D3h ci) and the other two are located on both sides of this symmetry line and in this way form the ci-twins. The study was carried out for four RHH-values, namely, RHH=0.74, 0.5417, 0.52, and 0.4777 Å. It was also established that there exists one single RHH-value designated as R˜HH, located in the interval {0.52, 0.53 Å}, for which all four cis coalesce to become one kind of "super" ci which couples the three states. The numerical study was carried out employing the line integral approach for groups of two and three states. As for the two-state calculations we found that all D3h-cis, at close proximity, are circular (ordinary) Jahn-Teller-type cis, whereas all C2v-cis, at close proximity, are elliptic Jahn-Teller cis [Chem. Phys. Lett 354, 243 (2002)]. Particular attention is given to the 3-state quantization of the nonadiabatic coupling matrix. The quantization is found to be fulfilled in all situations as long as the regions in configuration space are not too far from the relevant cis. In the Discussion and Conclusion we discuss, among other subjects, the possibility to diabatize the adiabatic potential matrix.

Pt anti-cancer drug interactions with oligodeoxyribonucleotides

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fouts, C.S.

The Pt adducts of d(TGGT) were investigated by /sup 31/P and /sup 1/H NMR spectroscopy with the following compounds: cisPtA/sub 2/Cl/sub 2/ (A/sub 2/ = en, (NH/sub 3/)/sub 2/, (MeNH/sub 2/)/sub 2/, tn, Me/sub 2/ tn, and N,N-Me/sub 2/en) and transPt (NH/sub 3/)/sub 2/Cl/sub 2/. Limited studies were performed with d(TTGG), D(GGTT), D(pGGTT), and d(TAGT). For d(TGGT)Pt(en) and d(TGGT)cisPt(MeNH/sub 2/)/sub 2/, the downfield /sup 31/P NMR signal was assigned to the GpG moiety by selective 2D NMR techniques. It was demonstrated that Pt formed a crosslink with the GpG moiety and the G's were in a head-to-head configuration. A downfieldmore » /sup 31/P NMR signal appears to be characteristic of Pt-crosslinked species and can be correlated with potential hydrogen bonding ability of the Pt complexes and the oligonucleotides. The signal was not shifted as far downfield when the group cis to the 5' G was incapable of hydrogen bonding or when no phosphate group was 5' to the GpG moiety.« less

13-cis Retinoic acid induces apoptosis and cell cycle arrest in human SEB-1 sebocytes.

PubMed

Nelson, Amanda M; Gilliland, Kathryn L; Cong, Zhaoyuan; Thiboutot, Diane M

2006-10-01

Isotretinoin (13-cis retinoic acid (13-cis RA)) is the most potent inhibitor of sebum production, a key component in the pathophysiology of acne, yet its mechanism of action remains largely unknown. The effects of 13-cis RA, 9-cis retinoic acid (9-cis RA), and all-trans retinoic acid (ATRA) on cell proliferation, apoptosis, and cell cycle proteins were examined in SEB-1 sebocytes and keratinocytes. 13-cis RA causes significant dose-dependent and time-dependent decreases in viable SEB-1 sebocytes. A portion of this decrease can be attributed to cell cycle arrest as evidenced by decreased DNA synthesis, increased p21 protein expression, and decreased cyclin D1. Although not previously demonstrated in sebocytes, we report that 13-cis RA induces apoptosis in SEB-1 sebocytes as shown by increased Annexin V-FITC staining, increased TUNEL staining, and increased cleaved caspase 3 protein. Furthermore, the ability of 13-cis RA to induce apoptosis cannot be recapitulated by 9-cis RA or ATRA, and it is not inhibited by the presence of a retinoid acid receptor (RAR) pan-antagonist AGN 193109. Taken together these data indicate that 13-cis RA causes cell cycle arrest and induces apoptosis in SEB-1 sebocytes by a RAR-independent mechanism, which contributes to its sebosuppressive effect and the resolution of acne.

A System Approach to Navy Medical Education and Training. Volume 1

DTIC Science & Technology

1974-08-31

each of the four major pro - ducts complement one another, they form, in fact, a single major product, that of the technology for improved training...the course of determining the functional limits and con - tent areas peculiar to potentially delegable tasks, it is highly desirable to be able to...NISTOS CYTO CLINICAL X-RAY LAS AST LAB ASST LAB AS SI AS SL ABI ASITO LA LAB STMIL OPERATIONS PATIENT CARE OP -- PC -- GMo GMO M.D. M.D. M.D MD M

Set-up and validation of a Delft-FEWS based coastal hazard forecasting system

NASA Astrophysics Data System (ADS)

Valchev, Nikolay; Eftimova, Petya; Andreeva, Nataliya

2017-04-01

European coasts are increasingly threatened by hazards related to low-probability and high-impact hydro-meteorological events. Uncertainties in hazard prediction and capabilities to cope with their impact lie in both future storm pattern and increasing coastal development. Therefore, adaptation to future conditions requires a re-evaluation of coastal disaster risk reduction (DRR) strategies and introduction of a more efficient mix of prevention, mitigation and preparedness measures. The latter presumes that development of tools, which can manage the complex process of merging data and models and generate products on the current and expected hydro-and morpho-dynamic states of the coasts, such as forecasting system of flooding and erosion hazards at vulnerable coastal locations (hotspots), is of vital importance. Output of such system can be of an utmost value for coastal stakeholders and the entire coastal community. In response to these challenges, Delft-FEWS provides a state-of-the-art framework for implementation of such system with vast capabilities to trigger the early warning process. In addition, this framework is highly customizable to the specific requirements of any individual coastal hotspot. Since its release many Delft-FEWS based forecasting system related to inland flooding have been developed. However, limited number of coastal applications was implemented. In this paper, a set-up of Delft-FEWS based forecasting system for Varna Bay (Bulgaria) and a coastal hotspot, which includes a sandy beach and port infrastructure, is presented. It is implemented in the frame of RISC-KIT project (Resilience-Increasing Strategies for Coasts - toolKIT). The system output generated in hindcast mode is validated with available observations of surge levels, wave and morphodynamic parameters for a sequence of three short-duration and relatively weak storm events occurred during February 4-12, 2015. Generally, the models' performance is considered as very good and results obtained - quite promising for reliable prediction of both boundary conditions and coastal hazard and gives a good basis for estimation of onshore impact.

Synthesis, structure, and characterization of two Zn(II) complex containing two-dimensional bilayer structure

NASA Astrophysics Data System (ADS)

Zhang, Meili; Ren, Yixia; Chen, Xiaoli

2014-10-01

Two new Zn(II) complexes, [Zn2(L)(H2O)3]ṡH2O (1) and [Zn3(HL)2(bpp)2(Hbpp)2]ṡ10H2Oṡ2ClO4 (2) (H4L = cis,cis,cis,cis-1,2,3,4-cyclopentanetracarboxylic acid, bpp = 1,3-bis(4-pyridyl)propane), have been synthesized and characterized by elemental analysis, IR spectroscopy and single-crystal X-ray diffraction techniques. The structure indicates that the complex 1 crystallizes in triclinic, space group Pī, in which, the four carboxylate groups of L ligand adopt μ2-η1:η0, μ2-η1:η1, μ1-η1:η1 coordination modes, respectively, bridging Zn(II) atoms to generate a (4,6)-connected 2D bilayer network. The structure indicates that the complex 2 crystallizes in monoclinic, space group C2/c, in which, three deprotonated carboxylate groups of L ligand adopt uniform μ1-η1:η0 coordination mode linking Zn(II) atoms to form a 1D polymeric ribbon, the bpp ligands further extend such ribbon giving rised to a (3,4)-connected 2D bilayer network. The most striking feature of 1 and 2 is that both of bilayer networks contain 1D solvent channel, where water molecules are located. In additional, luminescent properties of two complexes have also been studied.

A Pre-Steady State Kinetic Analysis of the αY60W mutant of trans-3-Chloroacrylic Acid Dehalogenase: Implications for the Mechanism of the Wild-type Enzyme†

PubMed Central

Huddleston, Jamison P.; Schroeder, Gottfried K.; Johnson, Kenneth A.; Whitman, Christian P.

2012-01-01

The bacterial degradation of the nematicide 1,3-dichloropropene, an isomeric mixture, requires the action of trans- and cis-3-chloracrylic acid dehalogenase (CaaD and cis-CaaD, respectively). Both enzymes are tautomerase superfamily members and share a core catalytic mechanism for the hydrolytic dehalogenation of the respective isomer of 3-haloacrylate. The observation that cis-CaaD requires two additional residues raises the question of how CaaD carries out a comparable reaction with fewer catalytic residues. As part of an effort to determine the basis for the apparently simpler CaaD-catalyzed reaction, the kinetic mechanism was determined by stopped-flow and chemical quench techniques using a fluorescent mutant form of the enzyme, αY60W-CaaD, and trans-3-bromoacrylate as the substrate. The data from these experiments as well as bromide inhibition studies are best accommodated by a six-step model that provides individual rate constants for substrate binding, chemistry, and a proposed conformational change occurring after chemistry followed by release of malonate semialdehyde and bromide. The conformational change and product release rates are comparable and together they limit the rate of turnover. The kinetic analysis and modeling studies validate the αY60W-CaaD mutant as an accurate reporter of active site events during the course of the enzyme-catalyzed reaction. The kinetic mechanism for the αY60W-CaaD-catalyzed reaction is comparable to that obtained for the cis-CaaD-catalyzed reaction. The kinetic model and the validated αY60W-CaaD mutant set the stage for an analysis of active site mutants to explore the contributions of individual catalytic residues and the basis for the simplicity of the reaction. PMID:23110338

Low aqueous solubility of 11-cis-retinal limits the rate of pigment formation and dark adaptation in salamander rods.

PubMed

Frederiksen, Rikard; Boyer, Nicholas P; Nickle, Benjamin; Chakrabarti, Kalyan S; Koutalos, Yiannis; Crouch, Rosalie K; Oprian, Daniel; Cornwall, M Carter

2012-06-01

We report experiments designed to test the hypothesis that the aqueous solubility of 11-cis-retinoids plays a significant role in the rate of visual pigment regeneration. Therefore, we have compared the aqueous solubility and the partition coefficients in photoreceptor membranes of native 11-cis-retinal and an analogue retinoid, 11-cis 4-OH retinal, which has a significantly higher solubility in aqueous medium. We have then correlated these parameters with the rates of pigment regeneration and sensitivity recovery that are observed when bleached intact salamander rod photoreceptors are treated with physiological solutions containing these retinoids. We report the following results: (a) 11-cis 4-OH retinal is more soluble in aqueous buffer than 11-cis-retinal. (b) Both 11-cis-retinal and 11-cis 4-OH retinal have extremely high partition coefficients in photoreceptor membranes, though the partition coefficient of 11-cis-retinal is roughly 50-fold greater than that of 11-cis 4-OH retinal. (c) Intact bleached isolated rods treated with solutions containing equimolar amounts of 11-cis-retinal or 11-cis 4-OH retinal form functional visual pigments that promote full recovery of dark current, sensitivity, and response kinetics. However, rods treated with 11-cis 4-OH retinal regenerated on average fivefold faster than rods treated with 11-cis-retinal. (d) Pigment regeneration from recombinant and wild-type opsin in solution is slower when treated with 11-cis 4-OH retinal than with 11-cis-retinal. Based on these observations, we propose a model in which aqueous solubility of cis-retinoids within the photoreceptor cytosol can place a limit on the rate of visual pigment regeneration in vertebrate photoreceptors. We conclude that the cytosolic gap between the plasma membrane and the disk membranes presents a bottleneck for retinoid flux that results in slowed pigment regeneration and dark adaptation in rod photoreceptors.

Laboratory Accreditation Bureau (L-A-B)

DTIC Science & Technology

2011-03-28

to all Technical Advisors. Must agree with code of conduct, confidentiality and our mission DoD ELAP Program  ISO / IEC 17025 :2005 and DoD QSM...Additional DoD QSM requirements fit well in current 17025 process … just much, much more. Sector Specific. Outcome (L-A-B case)  83

Reflections on Three Corporate Research Labs: Bell Labs, HP Labs, Agilent Labs

NASA Astrophysics Data System (ADS)

Hollenhorst, James

2008-03-01

This will be a personal reflection on corporate life and physics-based research in three industrial research labs over three decades, Bell Labs during the 1980's, HP Labs during the 1990's, and Agilent Labs during the 2000's. These were times of great change in all three companies. I'll point out some of the similarities and differences in corporate cultures and how this impacted the research and development activities. Along the way I'll mention some of the great products that resulted from physics-based R&D.

Dinitrogen Difluoride Chemistry. Improved Synthesis of cis- and trans-N2F2, Synthesis and Characterization of N2F+Sn2F9 High-Level Electronic Structure Calculations of cis-N2F2, trans-N2F2, F2N=N, and N2F+, and Mechanism of the trans-cis Isomerization of N2F2 (Preprint)

DTIC Science & Technology

2010-05-01

measurements of Pankratov and Sokolov who found that within experimental error this value was close to zero.48 We note that the current calculations are...Z. Chem. Phys. Lett. 1977, 50, 418. 9. Christe, K. O.; Wilson, R. D.; Wilson, W. W.; Bau, R.; Sukumar, S.; Dixon, D. A. J. Am. Chem. Soc. 1991 , 113...Phys. Chem. Ref. Data, Mono. 9, Suppl. 1 (1998). 48. Pankratov , A. V.; Sokolov, O. M. Russ. J. Inorg. Chem. 1966, 11, 943. 49. Christe, K. O

Potential of isotope analysis (C, Cl) to identify dechlorination mechanisms

NASA Astrophysics Data System (ADS)

Cretnik, Stefan; Thoreson, Kristen; Bernstein, Anat; Ebert, Karin; Buchner, Daniel; Laskov, Christine; Haderlein, Stefan; Shouakar-Stash, Orfan; Kliegman, Sarah; McNeill, Kristopher; Elsner, Martin

2013-04-01

Chloroethenes are commonly used in industrial applications, and detected as carcinogenic contaminants in the environment. Their dehalogenation is of environmental importance in remediation processes. However, a detailed understanding frequently accounted problem is the accumulation of toxic degradation products such as cis-dichloroethylene (cis-DCE) at contaminated sites. Several studies have addressed the reductive dehalogenation reactions using biotic and abiotic model systems, but a crucial question in this context has remained open: Do environmental transformations occur by the same mechanism as in their corresponding in vitro model systems? The presented study shows the potential to close this research gap using the latest developments in compound specific chlorine isotope analysis, which make it possible to routinely measure chlorine isotope fractionation of chloroethenes in environmental samples and complex reaction mixtures.1,2 In particular, such chlorine isotope analysis enables the measurement of isotope fractionation for two elements (i.e., C and Cl) in chloroethenes. When isotope values of both elements are plotted against each other, different slopes reflect different underlying mechanisms and are remarkably insensitive towards masking. Our results suggest that different microbial strains (G. lovleyi strain SZ, D. hafniense Y51) and the isolated cofactor cobalamin employ similar mechanisms of reductive dechlorination of TCE. In contrast, evidence for a different mechanism was obtained with cobaloxime cautioning its use as a model for biodegradation. The study shows the potential of the dual isotope approach as a tool to directly compare transformation mechanisms of environmental scenarios, biotic transformations, and their putative chemical lab scale systems. Furthermore, it serves as an essential reference when using the dual isotope approach to assess the fate of chlorinated compounds in the environment.

Analysis of the coriolis interaction of the ν12 band with 2 ν10 of cis-d 2-ethylene by high-resolution Fourier transform infrared spectroscopy

NASA Astrophysics Data System (ADS)

Goh, K. L.; Tan, T. L.; Ong, P. P.; Teo, H. H.

2000-08-01

The Fourier transform infrared spectrum of the ν12 band of cis-d 2-ethylene ( cis-C 2H 2D 2) has been recorded with an unapodized resolution of 0.0024 cm -1 in the frequency range of 1280-1400 cm -1. This band was found to be mutually coupled by Coriolis interaction with the unobserved 2 ν10 band situated approximately 10 cm -1 below ν12. By fitting a total of 771 infrared transitions of ν12 with a standard deviation of 0.00075 cm -1 using the Watson's Hamiltonian with the inclusion of a c-type Coriolis resonance term, a set of accurate rovibrational constants for V 12=1 state was derived. The ν12 band is A type with a band centre at 1341.1512±0.0001 cm -1. Accurate rovibrational constants for the V 10=2 state were also derived.

Theoretical Studies of Possible Synthetic Routes for the High Energy Density Material Td N4: Excited Electronic States

NASA Technical Reports Server (NTRS)

Lee, Timothy J.; Dateo, Christopher E.

2001-01-01

Vertical electronic excitation energies for single states have been computed for the high energy density material (HEDM) Td N4 in order to assess possible synthetic routes that originate from excited electronic states of N2 molecules. Several ab initio theoretical approaches have been used, including complete active space self-consistent field (CASSCF), state averaged CASSCF (SA-CASSCF), singles configuration interaction (CIS), CIS with second-order and third-order correlation corrections [CIS(D)) and CIS(3)], and linear response singles and doubles coupled-cluster (LRCCSD), which is the highest level of theory employed. Standard double zeta polarized (DZP) and triple zeta double polarized (TZ2P) one-particle basis sets were used. The CASSCF calculations are found to overestimate the excitation energies, while the SA-CASSCF approach rectifies this error to some extent, but not completely. The accuracy of the CIS calculations varied depending on the particular state, while the CIS(D), CIS(3), and LRCCSD results are in generally good agreement. Based on the LRCCSD calculations, the lowest six excited singlet states are 9.35(l(sup)T1), 10.01(l(sup)T2), 10.04(1(sup)A2), 10.07(1(sup)E), 10.12(2(sup)T1), and 10.42(2(sup)T2) eV above the ground state, respectively. Comparison of these excited state energies with the energies of possible excited states of N2+N2 fragments, leads us to propose that the most likely synthetic route for Td N4 involving this mechanism arises from combination of two bound quintet states of N2.

Impact of vegetation on the hydrodynamics and morphological changes of the Wax Lake Delta during hurricanes

NASA Astrophysics Data System (ADS)

Xing, F.; Kettner, A. J.; Syvitski, J. P.; Ye, Q.; Bevington, A.; Twilley, R.; Atkinson, J. H.

2013-12-01

Coastal wetlands are natural barriers for storms, but have become more vulnerable especially when considering sea level rise and intensification of hurricanes due to global climate change. We use the numerical model Delft3D, which incorporates a newly developed vegetation routine to analyze the impact of natural vegetation on the morphological changes of coastal wetlands. The vegetation routine takes into account: 1) the influence of vertically oriented stems of plants as well as horizontally oriented stems (bent or broken but still attached to the belowground roots and rhizomes) on the flow turbulence as well as flow momentum, and 2) the influence of plant roots on the submerged soil strength. The model is applied to the Wax Lake Delta, a river-dominated delta that is part of the larger Mississippi River Delta system, during extreme events (hurricane Katrina and Rita (2005)). Hydrodynamic components as well as waves and salinity are included in the Delft3D model simulation. Results reveal that the submerged aboveground plant stems significantly decrease flow velocity and protect the wetland from erosion. When flow velocity exceeds a critical value, plant stems start to orient horizontally and lie on the bed, which changes the 3D vertical flow structure to free water condition (log profile), and also increases the bed roughness on the wetlands. Roots help to increase the soil strength, reducing erosion of the wetlands. However, roots can also intensify erosion if they got pulled out of the soil during storm events. Typically the whole root system of plants will be pulled out together, leading to a mat of soil that is eroded. This process has been observed for some parts of the Mississippi Delta during severe hurricanes like hurricane Katrina. Storm surges generated by hurricanes can push a large amount of saline water into the freshwater wetlands. The high salinity water increases flocculation and therefore sedimentation. Overall, plants have a complex impact on the hydrodynamic and morphological changes of coastal wetlands, which are not yet fully understood. This study shows that plants have to be taken into consideration when studying morphological processes of wetlands, especially during extreme events, such as hurricanes.

3D-printed lab-on-valve for fluorescent determination of cadmium and lead in water.

PubMed

Mattio, Elodie; Robert-Peillard, Fabien; Vassalo, Laurent; Branger, Catherine; Margaillan, André; Brach-Papa, Christophe; Knoery, Joël; Boudenne, Jean-Luc; Coulomb, Bruno

2018-06-01

In recent years, the development of 3D printing in flow analysis has allowed the creation of new systems with various applications. Up to now, 3D printing was mainly used for the manufacture of small units such as flow detection cells, preconcentration units or mixing systems. In the present study, a new 3D printed lab-on-valve system was developed to selectively quantify lead and cadmium in water. Different technologies were compared for lab-on-valve 3D printing. Printed test units have shown that stereolithography or digital light processing are satisfactory techniques for creating complex lab-on-valve units. The lab-on-valve system was composed of two columns, eight peripheral ports and a central port, and a coil integrating baffles to increase mixing possibilities. A selective extraction of lead was first carried out by TrisKem Pb™ Resin column. Then, cadmium not retained on the first column was extracted on a second column of Amberlite® IR 120 resin. In a following step, lead and cadmium were eluted with ammonium oxalate and potassium iodide, respectively. Finally, the two metals were sequentially detected by the same Rhod-5N™ fluorescent reagent. This 3D printed lab-on-valve flow system allowed us to quantify lead and cadmium with a linear response from 0.2 to 15 µg L -1 and detection limits of 0.17 and 0.20 µg L -1 for lead and cadmium, respectively, which seems adapted for natural water analysis. Copyright © 2018 Elsevier B.V. All rights reserved.

MineLoC: A Rapid Production of Lab-on-a-Chip Biosensors Using 3D Printer and the Sandbox Game, Minecraft.

PubMed

Kim, Kyukwang; Kim, Hyeongkeun; Kim, Seunggyu; Jeon, Jessie S

2018-06-10

Here, MineLoC is described as a pipeline developed to generate 3D printable models of master templates for Lab-on-a-Chip (LoC) by using a popular multi-player sandbox game “Minecraft”. The user can draw a simple diagram describing the channels and chambers of the Lab-on-a-Chip devices with pre-registered color codes which indicate the height of the generated structure. MineLoC converts the diagram into large chunks of blocks (equal sized cube units composing every object in the game) in the game world. The user and co-workers can simultaneously access the game and edit, modify, or review, which is a feature not generally supported by conventional design software. Once the review is complete, the resultant structure can be exported into a stereolithography (STL) file which can be used in additive manufacturing. Then, the Lab-on-a-Chip device can be fabricated by the standard protocol to produce a Lab-on-a-Chip. The simple polydimethylsiloxane (PDMS) device for the bacterial growth measurement used in the previous research was copied by the proposed method. The error calculation by a 3D model comparison showed an accuracy of 86%. It is anticipated that this work will facilitate more use of 3D printer-based Lab-on-a-Chip fabrication, which greatly lowers the entry barrier in the field of Lab-on-a-Chip research.

The Virtual Radiopharmacy Laboratory: A 3-D Simulation for Distance Learning

ERIC Educational Resources Information Center

Alexiou, Antonios; Bouras, Christos; Giannaka, Eri; Kapoulas, Vaggelis; Nani, Maria; Tsiatsos, Thrasivoulos

2004-01-01

This article presents Virtual Radiopharmacy Laboratory (VR LAB), a virtual laboratory accessible through the Internet. VR LAB is designed and implemented in the framework of the VirRAD European project. This laboratory represents a 3D simulation of a radio-pharmacy laboratory, where learners, represented by 3D avatars, can experiment on…

Differential involvement of dopamine D-1 and D-2 receptors in the circling behaviour induced by apomorphine, SK & F 38393, pergolide and LY 171555 in 6-hydroxydopamine-lesioned rats.

PubMed

Arnt, J; Hyttel, J

1985-01-01

The antagonistic effect of dopamine (DA) D-1 and D-2 antagonists against circling behaviour induced by various DA agonists in 6-OHDA-lesioned rats has been investigated. DA D-1/D-2 selectivity of agonists in vitro was measured by the stimulatory effect on DA-sensitive adenylate cyclase in rat striatal homogenates (D-1), the inhibitory effect on electrically-induced release of 3H-DA in rabbit striatal slices (D-2) and the affinity to 3H-piflutixol (D-1) and 3H-spiroperidol (D-2) binding sites in rat striatal membranes. The contralateral circling behaviour induced by the DA D-1 agonist SK & F 38393 was blocked by the DA D-1 antagonist, SCH 23390, and by the mixed DA D-1/D-2 antagonist cis(Z)-flupentixol, but was not influenced by the DA D-2 antagonists spiroperidol and clebopride. In contrast, circling behaviour induced by the preferential DA D-2 agonists pergolide and LY 171555 was blocked by clebopride, spiroperidol, and cis(Z)-flupentixol, but weakly or not influenced by SCH 23390. Apomorphine-induced circling behaviour was blocked by cis(Z)-flupentixol, partially antagonized by SCH 23390 and clebopride but not inhibited by spiroperidol, although the time-course of circling was changed. Combinations of SCH 23390 with spiroperidol or clebopride in low doses completely blocked the effect of apomorphine. These results indicate that DA D-1 and D-2 receptors mediate circling behaviour through separate mechanisms which can be independently manipulated with respective agonists and antagonists.(ABSTRACT TRUNCATED AT 250 WORDS)

Characterization of a novel and potentially lethal designer drug (±)-cis-para-methyl-4-methylaminorex (4,4'-DMAR, or 'Serotoni').

PubMed

Brandt, Simon D; Baumann, Michael H; Partilla, John S; Kavanagh, Pierce V; Power, John D; Talbot, Brian; Twamley, Brendan; Mahony, Olivia; O'Brien, John; Elliott, Simon P; Archer, Roland P; Patrick, Julian; Singh, Kuldip; Dempster, Nicola M; Cosbey, Simon H

2014-01-01

During the second half of 2013, a total of 26 deaths involving para-methyl-4-methylaminorex (4,4'-DMAR) were reported to the European Monitoring Centre for Drugs and Drug Addiction. While aminorex and 4-methylaminorex (4-MAR) are known psychostimulants, nothing is known about the comparatively new para-methyl analog. Analytical characterization of two independent samples obtained from online vendors confirmed the presence of the (±)-cis isomer that also appeared to be associated with at least 18 of the 26 deaths. Extensive characterizations included crystal structure analysis, single, tandem, and high-resolution mass spectrometry, liquid and gas chromatography, and nuclear magnetic resonance spectroscopy. For the work described here, both the (±)-cis and (±)-trans racemates were also synthesized, confirming that the differentiation between these two forms was straight-forward. Monoamine transporter activity was studied using rat brain synaptosomes which included the comparison with d-amphetamine, aminorex and (±)-cis-4-MAR. (±)-cis-4,4'-DMAR was a potent, efficacious substrate-type releaser at transporters for dopamine, norepinephrine and serotonin with EC50 values of 8.6 ± 1.1 nM (DAT), 26.9 ± 5.9 nM (NET) and 18.5 ± 2.8 nM (SERT), respectively. The potency of (±)-cis-4,4'-DMAR at DAT and NET rivalled that of other psychomotor stimulant drugs like d-amphetamine and aminorex. However, (±)-cis-4,4'-DMAR had much more potent actions at SERT and activity at SERT varied more than 100-fold across the four drugs. The potent releasing activity of (±)-cis-4,4'-DMAR at all three monoamine transporters predicts a potential for serious side-effects such as psychotic symptoms, agitation, hyperthermia and cardiovascular stimulation, especially after high-dose exposure or following combination with other psychostimulants. Copyright © 2014 John Wiley & Sons, Ltd.

Estimation of cis-9, trans-11 conjugated linoleic acid content in UK foods and assessment of dietary intake in a cohort of healthy adults.

PubMed

Mushtaq, Sohail; Heather Mangiapane, E; Hunter, Kirsty A

2010-05-01

Dietary conjugated linoleic acid (CLA) from ruminant-derived foods may be potentially beneficial to health. The quantity of cis-9, trans-11 CLA and trans-10, cis-12 CLA in a range of UK foodstuffs (112 foods) was determined using triple-column silver ion HPLC. The cis-9, trans-11 CLA content ranged from 1.9 mg/g lipid (mild Cheddar) to 7.3 mg/g lipid (processed cheese) in cheeses, from 0.9 mg/g lipid (ice cream) to 3.7 mg/g lipid (double cream) in non-cheese dairy products, and from 2.9 mg/g lipid (Swedish meatballs) to 6.0 mg/g lipid (minced lamb) in meat products. cis-9, trans-11 CLA concentrations for chocolate and sweets ranged from 0.1 mg/g lipid (hot chocolate) to 4.8 mg/g lipid (buttermint). The trans-10, cis-12 CLA isomer was undetected or negligible in the food samples examined. To provide information about dietary cis-9, trans-11 CLA intakes in the UK, a study was performed to estimate the daily intake of CLA in a cohort of eighteen healthy volunteers (nine female and nine male; aged 21-60 years; mean BMI = 24.0 kg/m2 (sd 2.2)) with a 7-d weighed food record. This information combined with the CLA isomer contents of UK foodstuffs was used to estimate the daily intake of the cohort. The mean daily intake of cis-9, trans-11 CLA was estimated to be 97.5 (sd 73.3) mg/d. Due to its potential health benefits, it is important to determine the CLA content of food and dietary intake as these data will be useful in determining the role of CLA in health and disease.

Uncertainty Analysis and Parameter Estimation For Nearshore Hydrodynamic Models

NASA Astrophysics Data System (ADS)

Ardani, S.; Kaihatu, J. M.

2012-12-01

Numerical models represent deterministic approaches used for the relevant physical processes in the nearshore. Complexity of the physics of the model and uncertainty involved in the model inputs compel us to apply a stochastic approach to analyze the robustness of the model. The Bayesian inverse problem is one powerful way to estimate the important input model parameters (determined by apriori sensitivity analysis) and can be used for uncertainty analysis of the outputs. Bayesian techniques can be used to find the range of most probable parameters based on the probability of the observed data and the residual errors. In this study, the effect of input data involving lateral (Neumann) boundary conditions, bathymetry and off-shore wave conditions on nearshore numerical models are considered. Monte Carlo simulation is applied to a deterministic numerical model (the Delft3D modeling suite for coupled waves and flow) for the resulting uncertainty analysis of the outputs (wave height, flow velocity, mean sea level and etc.). Uncertainty analysis of outputs is performed by random sampling from the input probability distribution functions and running the model as required until convergence to the consistent results is achieved. The case study used in this analysis is the Duck94 experiment, which was conducted at the U.S. Army Field Research Facility at Duck, North Carolina, USA in the fall of 1994. The joint probability of model parameters relevant for the Duck94 experiments will be found using the Bayesian approach. We will further show that, by using Bayesian techniques to estimate the optimized model parameters as inputs and applying them for uncertainty analysis, we can obtain more consistent results than using the prior information for input data which means that the variation of the uncertain parameter will be decreased and the probability of the observed data will improve as well. Keywords: Monte Carlo Simulation, Delft3D, uncertainty analysis, Bayesian techniques, MCMC

OpenDA Open Source Generic Data Assimilation Environment and its Application in Process Models

NASA Astrophysics Data System (ADS)

El Serafy, Ghada; Verlaan, Martin; Hummel, Stef; Weerts, Albrecht; Dhondia, Juzer

2010-05-01

Data Assimilation techniques are essential elements in state-of-the-art development of models and their optimization with data in the field of groundwater, surface water and soil systems. They are essential tools in calibration of complex modelling systems and improvement of model forecasts. The OpenDA is a new and generic open source data assimilation environment for application to a choice of physical process models, applied to case dependent domains. OpenDA was introduced recently when the developers of Costa, an open-source TU Delft project [http://www.costapse.org; Van Velzen and Verlaan; 2007] and those of the DATools from the former WL|Delft Hydraulics [El Serafy et al 2007; Weerts et al. 2009] decided to join forces. OpenDA makes use of a set of interfaces that describe the interaction between models, observations and data assimilation algorithms. It focuses on flexible applications in portable systems for modelling geophysical processes. It provides a generic interfacing protocol that allows combination of the implemented data assimilation techniques with, in principle, any time-stepping model duscribing a process(atmospheric processes, 3D circulation, 2D water level, sea surface temperature, soil systems, groundwater etc.). Presently, OpenDA features filtering techniques and calibration techniques. The presentation will give an overview of the OpenDA and the results of some of its practical applications. Application of data assimilation in portable operational forecasting systems—the DATools assimilation environment, El Serafy G.Y., H. Gerritsen, S. Hummel, A. H. Weerts, A.E. Mynett and M. Tanaka (2007), Journal of Ocean Dynamics, DOI 10.1007/s10236-007-0124-3, pp.485-499. COSTA a problem solving environment for data assimilation applied for hydrodynamical modelling, Van Velzen and Verlaan (2007), Meteorologische Zeitschrift, Volume 16, Number 6, December 2007 , pp. 777-793(17). Application of generic data assimilation tools (DATools) for flood forecasting purposes, A.H. Weerts, G.Y.H. El Serafy, S. Hummel, J. Dhondia, and H. Gerritsen (2009), accepted by Geoscience & Computers.

Modelling of sediment transport pattern in the mouth of the Rhone delta: Role of storm and flood events

NASA Astrophysics Data System (ADS)

Boudet, L.; Sabatier, F.; Radakovitch, O.

2017-11-01

The delta of the Rhone River is one of the most important in the Mediterranean Sea. Beach erosion problems along its coasts have developed in recent decades, raising the need for a better understanding of the sediment transport processes at the Rhone mouth and the adjacent beaches. Because field data are very difficult to obtain in such an energetic environment, a high-resolution numerical model (Delft3D) is applied to this area. This model is calibrated by taking into account hydrodynamical and morphological observations. Special attention is given to storm and flood events, which are the major morphological drivers. Therefore, scenarios with different wave and flow conditions are run to estimate the influence of these events on the sediment transport. The analysis of historical hydrological data shows that storms from the southeast represent 70% of the events between 1979 to 2010 and that 20% of them were followed by a flood within a few days. Consequently, specific simulations for such conditions are performed using Delft3D. The model simulates trends in the bedload sediment transport that are consistent with the bedforms observed in the bathymetry data. The total sediment transport at the outlet is only influenced by the river flow, but sediment transport at the mouth-bar depends on an equilibrium between the influence of floods and storms and the succession of these events. A period of 2 or 3 days separating the storm and flood peaks is sufficient to differentiate wave and river flow-induced sediment transport. The waves constrain the total transport on the mouth-bar and shallow mouth-lobe and induce a longshore transfer towards the adjacent beaches. The riverine sediments can be exported seaward only if a flood is energetic enough compared to the storm intensity. Regardless, when a flood is greater than the decadal return period (7800 m3 s-1), the sediment is transported from the outlet across the mouth-bar and is directed offshore.

Feedbacks Between Wave Energy And Declining Coral Reef Structure: Implications For Coastal Morphodynamics

NASA Astrophysics Data System (ADS)

Grady, A. E.; Jenkins, C. J.; Moore, L. J.; Potts, D. C.; Burgess, P. M.; Storlazzi, C. D.; Elias, E.; Reidenbach, M. A.

2013-12-01

The incident wave energy dissipated by the structural complexity and bottom roughness of coral reef ecosystems, and the carbonate sediment produced by framework-building corals, provide natural shoreline protection and nourishment, respectively. Globally, coral reef ecosystems are in decline as a result of ocean warming and acidification, which is exacerbated by chronic regional stressors such as pollution and disease. As a consequence of declining reef health, many reef ecosystems are experiencing reduced coral cover and shifts to dominance by macroalgae, resulting in a loss of rugosity and thus hydrodynamic roughness. As coral reef architecture is compromised and carbonate skeletons are eroded, wave energy dissipation and sediment transport patterns--along with the carbonate sediment budget of the coastal environment--may be altered. Using a Delft3D numerical model of the south-central Molokai, Hawaii, fringing reef, we simulate the effects of changing reef states on wave energy and sediment transport. To determine the temporally-varying effects of biotic and abiotic stressors such as storms and bleaching on the reef structure and carbonate production, we couple Delft3D with CarboLOT, a model that simulates growth and competition of carbonate-producing organisms. CarboLOT is driven by the Lotka-Volterra population ecology equations and niche suitability principles, and accesses the CarboKB database for region-specific, carbonate-producing species information on growth rates, reproduction patterns, habitat suitability, as well as organism geometries. Simulations assess how changing reef states--which alter carbonate sediment production and reef morphology and thus hydrodynamic roughness--impact wave attenuation and sediment transport gradients along reef-fronted beaches. Initial results suggest that along fringing reefs having characteristics similar to the Molokai fringing reef, projected sea level rise will likely outpace coral reef accretion, and the increased residual wave energy transported to the coast may result in the alteration of alongshore sediment transport gradients and substantial changes to coastal morphology.

Sediment Transport over a Dredge Pit, Sandy Point Southeast, west flank of the Mississippi River during Summer Upcoast Currents: a Coupled Wave, Current and Sediment Numerical Model

NASA Astrophysics Data System (ADS)

Chaichitehrani, N.; Li, C.; Xu, K.; Bentley, S. J.; Miner, M. D.

2017-12-01

Sandy Point southeast, an elongated sand resource, was dredged in November 2012 to restore Pelican Island, Louisiana. Hydrodynamics and wave propagation patterns along with fluvial sediments from the Mississippi River influence the sediment and bottom boundary layer dynamics over Sandy Point. A state-of-the-art numerical model, Delft3D, was implemented to investigate current variations and wave transformation on Sandy Point as well as sediment transport pattern. Delft3d FLOW and WAVE modules were coupled and validated using WAVCIS and NDBC data. Sediment transport model was run by introducing both bed and river sediments, consisted of mainly mud and a small fraction of sand. A sediment transport model was evaluated for surface sediment concentration using data derived from satellite images. The model results were used to study sediment dynamics and bottom boundary layer characteristics focused on the Sandy Point area during summer. Two contrasting bathymetric configurations, with and without the Sandy Point dredge pit, were used to conduct an experiment on the sediment and bottom boundary layer dynamics. Preliminary model results showed that the presence of the Sandy Point pit has very limited effect on the hydrodynamics and wave pattern at the pit location. Sediments from the Mississippi River outlets, especially in the vicinity of the pit, get trapped in the pit under the easterly to the northeasterly upcoast current which prevails in August. We also examined the wave-induced sediment reworking and river-borne fluvial sediment over Sandy Point. The effect of wind induced orbital velocity increases the bottom shear stress compared to the time with no waves, relatively small wave heights (lower than 1.5 meters) along the deepest part of the pit (about 20 meters) causes little bottom sediment rework during this period. The results showed that in the summertime, river water is more likely the source of sedimentation in the pit.

Morphodynamic Assessment of West Bay Sediment Diversion: A Land Building Analogue for the Lower Mississippi River Delta

NASA Astrophysics Data System (ADS)

Khadka, A. K.; Meselhe, E. A.; Allison, M. A.; Yuill, B.

2016-12-01

Wetlands of the Mississippi River Deltaic Plain have undergone enormous land loss in the last century due to natural and anthropogenic factors such as subsidence and canal building. After years of feasibility research, Lower Mississippi River (LMR) diversions have been authorized as a tool to build and sustain regional wetlands. To this end, the West Bay sediment diversion (WBD), located on the west bank of the Mississippi River at river kilometer 7.6 above Head of Passes, was constructed in 2003 with a project goal of building 4,000 hectares of wetlands in the estuarine receiving . This sediment diversion serves as splay analogue to calibrate predictive morphologic models that are being used to test the effects of proposed land building sediment diversions in the LMR. We developed a two-dimensional Delft3D model for the WBD area which includes the main channel of the Mississippi River, the diversion cut, and the receiving basin. The model is extensively calibrated and validated for hydrodynamics and morphodynamics in the main river stem, diversion cut and receiving basin using an array of field observations. The model provides quantitative information on the capture efficiency and grain size of LMR sediment diverted through the diversion. Further, the model provides insights into the morphological evolution and sediment capture efficiency of the receiving basin with diversion operation. Sensitivity tests were performed to examine the impacts of dominant drivers (wind, wave and sediment retention islands) on land building processes. The calibrated WBD model is helpful to establish appropriate parameterizations (e.g., substrate design) for the development of future numerical models designed to investigate the morphological response of receiving basins to the proposed diversions located along the LMR and in similar deltaic environments. Keywords: Numerical Modeling, Morphodynamics, Sediment Diversions, Lower Mississippi River, Delft3D,

Feedback Limiting the Coastal Response to Irregularities in Shelf Bathymetry

NASA Astrophysics Data System (ADS)

List, J. H.; Benedet, L.

2007-12-01

Observations and engineering studies have shown that non-uniform inner shelf bathymetry can influence longshore sediment transport gradients and create patterns of shoreline change. One classic example is from Grand Isle, Louisiana, where two offshore borrow pits caused two zones of shoreline accretion landward of the pits. In addition to anthropogenic cases, many natural situations exist in which irregularities in coastal planform are thought to result from offshore shoals or depressions. Recent studies using the hydrodynamic model Delft3D have successfully simulated the observed nearshore erosion and accretion patterns landward of an inner shelf borrow pit. An analysis of the momentum balance in a steady-state simulation has demonstrated that both alongshore pressure gradients (due to alongshore variations in wave setup) and radiation stress gradients (terms relevant to alongshore forcing) are important for forcing the initial pattern of nearshore sedimentation in response to the borrow pit. The response of the coast to non-uniform inner shelf bathymetry appears to be limited, however, because observed shoreline undulations are often rather subtle. (An exception may exist in the case of a very high angle wave climate.) Therefore, feedbacks in processes must exist such that growth of the shoreline salient itself modifies the transport processes in a way that limits further growth (assuming the perturbation in inner shelf bathymetry itself remains unchanged). Examination of the Delft3D momentum balance for an inner shelf pit test case demonstrates that after a certain degree of morphologic development the forcing associated with the well-known shoreline smoothing process (a.k.a., diffusion) counteracts the forcing associated with the inner shelf pit, producing a negative feedback which arrests further growth of the shoreline salient. These results provide insights into the physical processes that control shoreline changes behind inner shelf bathymetric anomalies (i.e. man-made dredge pits and natural bathymetric features) and are therefore relevant to the understanding and prediction of shoreline change on many coasts.

Development of Inundation Map for Bantayan Island, Cebu Using Delft3D-Flow Storm Surge Simulations of Typhoon Haiyan

NASA Astrophysics Data System (ADS)

Cuadra, Camille; Suarez, John Kenneth; Biton, Nophi Ian; Cabacaba, Krichi May; Lapidez, John Phillip; Santiago, Joy; Mahar Francisco Lagmay, Alfredo; Malano, Vicente

2014-05-01

On average, 20 typhoons enter the Philippine area of responsibility annually, making it vulnerable to different storm hazards. Apart from the frequency of tropical cyclones, the archipelagic nature of the country makes it particularly prone to storm surges. On 08 November 2013, Haiyan, a Category 5 Typhoon with maximum one-minute sustained wind speed of 315 kph, hit the central region of the Philippines. In its path, the howler devastated Bantayan Island, a popular tourist destination. The island is located north of Cebu City, the second largest metropolis of the Philippines in terms of populace. Having been directly hit by Typhoon Haiyan, Bantayan Island was severely damaged by strong winds and storm surges, with more than 11,000 houses totally destroyed while 5,000 more suffered minor damage. The adverse impacts of possible future storm surge events in the island can only be mitigated if hazard maps that depict inundation of the coastal areas of Bantayan are generated. To create such maps, Delft3D-Flow, a hydrodynamic model was used to simulate storm surges. These simulations were made over a 10-m per pixel resolution Digital Elevation Model (DEM) and the General Bathymetric Chart of the Oceans (GEBCO) bathymetry. The results of the coastal inundation model for Typhoon Haiyan's storm surges were validated using data collected from field work and local government reports. The hydrodynamic model of Bantayan was then calibrated using the field data and further simulations were made with varying typhoon tracks. This was done to generate scenarios on the farthest possible inland incursion of storm surges. The output of the study is a detailed storm surge inundation map that depicts safe zones for development of infrastructure near coastal areas and for construction of coastal protection structures. The storm surge inundation map can also be used as basis for disaster preparedness plans of coastal communities threatened by approaching typhoons.

Gene Expression Network Reconstruction by Convex Feature Selection when Incorporating Genetic Perturbations

PubMed Central

Logsdon, Benjamin A.; Mezey, Jason

2010-01-01

Cellular gene expression measurements contain regulatory information that can be used to discover novel network relationships. Here, we present a new algorithm for network reconstruction powered by the adaptive lasso, a theoretically and empirically well-behaved method for selecting the regulatory features of a network. Any algorithms designed for network discovery that make use of directed probabilistic graphs require perturbations, produced by either experiments or naturally occurring genetic variation, to successfully infer unique regulatory relationships from gene expression data. Our approach makes use of appropriately selected cis-expression Quantitative Trait Loci (cis-eQTL), which provide a sufficient set of independent perturbations for maximum network resolution. We compare the performance of our network reconstruction algorithm to four other approaches: the PC-algorithm, QTLnet, the QDG algorithm, and the NEO algorithm, all of which have been used to reconstruct directed networks among phenotypes leveraging QTL. We show that the adaptive lasso can outperform these algorithms for networks of ten genes and ten cis-eQTL, and is competitive with the QDG algorithm for networks with thirty genes and thirty cis-eQTL, with rich topologies and hundreds of samples. Using this novel approach, we identify unique sets of directed relationships in Saccharomyces cerevisiae when analyzing genome-wide gene expression data for an intercross between a wild strain and a lab strain. We recover novel putative network relationships between a tyrosine biosynthesis gene (TYR1), and genes involved in endocytosis (RCY1), the spindle checkpoint (BUB2), sulfonate catabolism (JLP1), and cell-cell communication (PRM7). Our algorithm provides a synthesis of feature selection methods and graphical model theory that has the potential to reveal new directed regulatory relationships from the analysis of population level genetic and gene expression data. PMID:21152011

Objective and Subjective Measures of Simultaneous vs Sequential Bilateral Cochlear Implants in Adults: A Randomized Clinical Trial.

PubMed

Kraaijenga, Véronique J C; Ramakers, Geerte G J; Smulders, Yvette E; van Zon, Alice; Stegeman, Inge; Smit, Adriana L; Stokroos, Robert J; Hendrice, Nadia; Free, Rolien H; Maat, Bert; Frijns, Johan H M; Briaire, Jeroen J; Mylanus, E A M; Huinck, Wendy J; Van Zanten, Gijsbert A; Grolman, Wilko

2017-09-01

To date, no randomized clinical trial on the comparison between simultaneous and sequential bilateral cochlear implants (BiCIs) has been performed. To investigate the hearing capabilities and the self-reported benefits of simultaneous BiCIs compared with those of sequential BiCIs. A multicenter randomized clinical trial was conducted between January 12, 2010, and September 2, 2012, at 5 tertiary referral centers among 40 participants eligible for BiCIs. Main inclusion criteria were postlingual severe to profound hearing loss, age 18 to 70 years, and a maximum duration of 10 years without hearing aid use in both ears. Data analysis was conducted from May 24 to June 12, 2016. The simultaneous BiCI group received 2 cochlear implants during 1 surgical procedure. The sequential BiCI group received 2 cochlear implants with an interval of 2 years between implants. First, the results 1 year after receiving simultaneous BiCIs were compared with the results 1 year after receiving sequential BiCIs. Second, the results of 3 years of follow-up for both groups were compared separately. The primary outcome measure was speech intelligibility in noise from straight ahead. Secondary outcome measures were speech intelligibility in noise from spatially separated sources, speech intelligibility in silence, localization capabilities, and self-reported benefits assessed with various hearing and quality of life questionnaires. Nineteen participants were randomized to receive simultaneous BiCIs (11 women and 8 men; median age, 52 years [interquartile range, 36-63 years]), and another 19 participants were randomized to undergo sequential BiCIs (8 women and 11 men; median age, 54 years [interquartile range, 43-64 years]). Three patients did not receive a second cochlear implant and were unavailable for follow-up. Comparable results were found 1 year after simultaneous or sequential BiCIs for speech intelligibility in noise from straight ahead (difference, 0.9 dB [95% CI, -3.1 to 4.4 dB]) and all secondary outcome measures except for localization with a 30° angle between loudspeakers (difference, -10% [95% CI, -20.1% to 0.0%]). In the sequential BiCI group, all participants performed significantly better after the BiCIs on speech intelligibility in noise from spatially separated sources and on all localization tests, which was consistent with most of the participants' self-reported hearing capabilities. Speech intelligibility-in-noise results improved in the simultaneous BiCI group up to 3 years following the BiCIs. This study shows comparable objective and subjective hearing results 1 year after receiving simultaneous BiCIs and sequential BiCIs with an interval of 2 years between implants. It also shows a significant benefit of sequential BiCIs over a unilateral cochlear implant. Until 3 years after receiving simultaneous BiCIs, speech intelligibility in noise significantly improved compared with previous years. trialregister.nl Identifier: NTR1722.

Design of cyclic peptides featuring proline predominantly in the cis conformation under physiological conditions.

PubMed

Malešević, Miroslav; Schumann, Michael; Jahreis, Günther; Fischer, Gunter; Lücke, Christian

2012-09-24

Turns are secondary-structure elements that are omnipresent in natively folded polypeptide chains. A large variety of four-residue β-turns exist, which differ mainly in the backbone dihedral angle values of the two central residues i+1 and i+2. The βVI-type turns are of particular biological interest because the i+2 residue is always a proline in the cis conformation and might thus serve as target of peptidyl prolyl cis/trans isomerases (PPIases). We have designed cyclic hexapeptides containing two proline residues that predominantly adopt the cis conformation in aqueous solution. NMR data and MD calculations indicated that the cyclic peptide sequences c-(-DXaa-Ser-Pro-DXaa-Lys-Pro-) result in highly symmetric backbone structures when both prolines are in the cis conformation and the D-amino acids are either alanine or phenylalanine residues. Replacement of the serine residue either by phosphoserine or by tyrosine compromises this symmetry, but further increases the cis conformation content of both prolines. As a result, we obtained a cyclic hexapeptide that exists almost exclusively as the cis-Pro/cis-Pro conformer but shows no cis/trans interconversion even in the presence of the PPIase Pin1, apparently due to an energetically quite favorable but highly restricted conformational space. Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Extraction of consensus protein patterns in regions containing non-proline cis peptide bonds and their functional assessment.

PubMed

Exarchos, Konstantinos P; Exarchos, Themis P; Rigas, Georgios; Papaloukas, Costas; Fotiadis, Dimitrios I

2011-05-10

In peptides and proteins, only a small percentile of peptide bonds adopts the cis configuration. Especially in the case of amide peptide bonds, the amount of cis conformations is quite limited thus hampering systematic studies, until recently. However, lately the emerging population of databases with more 3D structures of proteins has produced a considerable number of sequences containing non-proline cis formations (cis-nonPro). In our work, we extract regular expression-type patterns that are descriptive of regions surrounding the cis-nonPro formations. For this purpose, three types of pattern discovery are performed: i) exact pattern discovery, ii) pattern discovery using a chemical equivalency set, and iii) pattern discovery using a structural equivalency set. Afterwards, using each pattern as predicate, we search the Eukaryotic Linear Motif (ELM) resource to identify potential functional implications of regions with cis-nonPro peptide bonds. The patterns extracted from each type of pattern discovery are further employed, in order to formulate a pattern-based classifier, which is used to discriminate between cis-nonPro and trans-nonPro formations. In terms of functional implications, we observe a significant association of cis-nonPro peptide bonds towards ligand/binding functionalities. As for the pattern-based classification scheme, the highest results were obtained using the structural equivalency set, which yielded 70% accuracy, 77% sensitivity and 63% specificity.

Direct-fed microbials containing lactate-producing bacteria influence ruminal fermentation but not lactate utilization in steers fed a high-concentrate diet.

PubMed

Kenney, N M; Vanzant, E S; Harmon, D L; McLeod, K R

2015-05-01

Direct-fed microbials (DFM) have been shown to improve gain and growth efficiency and also modulate ruminal fermentation. In Exp. 1,72 beef steers were used to compare a lactate-producing bacterial (LAB) DFM consisting primarily of Lactobacillus acidophilus and Enterococcus faecium,and a lactate-producing and lactate-utilizing (LAB/LU) DFM consisting primarily of L. acidophilus and Propionibacterium both fed at 10(9) cfu/d. Steers were fed a corn-based finishing diet for 153 d and then slaughtered for collection of carcass characteristics. In Exp. 2, 12 ruminally cannulated steers were fed acorn-based finishing diet and treated with 10(9) cfu/d of LAB DFM. Rumen fluid was sampled on d 14 and 28 over a 12-h period. Steers were ruminally dosed with a 2-L solution of neutralized DL-lactate (0.56 M)and Cr-EDTA (13.22 M) 3 h postfeeding on d 15 and 29. Ruminal samples were collected at 10- and 20-minintervals for the first and second hour postdosing. No differences (P ≥ 0.14) between control (CON) and LAB for DMI, ADG, growth efficiency, or carcass characteristics were observed. Dry matter intake was greater (P = 0.04) for LAB/LU than LAB from d 0 to 28 but did not differ (P ≥ 0.29) thereafter. Average daily gain was greater (P = 0.04) and efficiency tended(P = 0.06) to be greater for LAB than LAB/LU over the entire 153 d. In Exp. 2, total VFA concentration and molar proportions of butyrate were unaffected(P ≥ 0.24). Molar proportions of acetate exhibited a DFM by hour interaction (P = 0.04); however, on average, molar proportion of acetate was 4.4% greater for DFM. Conversely, DFM did not affect the molar proportion of propionate (P = 0.39). On average,molar proportions of propionate tended to increase(P = 0.07), and acetate tended to decrease (P = 0.07)across days. Mean daily ruminal pH was similar for CON on d 14 and 28, whereas mean pH increased from d 14 to 28 for DFM (DFM × day; P = 0.08).Minimum pH remained unchanged for CON over time but increased from d 14 to 2 for DFM (DFM × day;P = 0.10). Maximum pH decreased from d 14 to 28 in CON but increased over time with DFM (DFM × day;P = 0.05). DL- and L-lactate utilization were unaffected by DFM (P ≥ 0.33) or day (P ≥ 0.50). Although the LAB DFM did not impact growth performance, itd id modulate ruminal fermentation, as evidenced by shifts in ruminal VFA profile and pH; however, DFM did not appear to influence ruminal lactate utilization.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hansen, Timothy M.; Palmintier, Bryan; Suryanarayanan, Siddharth

As more Smart Grid technologies (e.g., distributed photovoltaic, spatially distributed electric vehicle charging) are integrated into distribution grids, static distribution simulations are no longer sufficient for performing modeling and analysis. GridLAB-D is an agent-based distribution system simulation environment that allows fine-grained end-user models, including geospatial and network topology detail. A problem exists in that, without outside intervention, once the GridLAB-D simulation begins execution, it will run to completion without allowing the real-time interaction of Smart Grid controls, such as home energy management systems and aggregator control. We address this lack of runtime interaction by designing a flexible communication interface, Bus.pymore » (pronounced bus-dot-pie), that uses Python to pass messages between one or more GridLAB-D instances and a Smart Grid simulator. This work describes the design and implementation of Bus.py, discusses its usefulness in terms of some Smart Grid scenarios, and provides an example of an aggregator-based residential demand response system interacting with GridLAB-D through Bus.py. The small scale example demonstrates the validity of the interface and shows that an aggregator using said interface is able to control residential loads in GridLAB-D during runtime to cause a reduction in the peak load on the distribution system in (a) peak reduction and (b) time-of-use pricing cases.« less

Improved performance of low cost CuInS2 superstrate-type solar cells using Zinc assisted spray pyrolysis processing

NASA Astrophysics Data System (ADS)

Cheshme Khavar, Amir Hossein; Mahjoub, Ali Reza; Taghavinia, Nima

2017-12-01

Superstrate configuration CuInS2 (CIS) solar cells are fabricated using a spray pyrolysis method. We avoided selenization process, cyanide etching and CdS buffer layer, to keep the process ‘green’. CIS layers are formed by spray pyrolysis of an aqueous precursor ink containing metal chloride salts and thiourea at 350 °C. We investigated the effect of intentional Zn doping on structural, morphological and photovoltaic response of the fabricated CIS films by dissolving ZnCl2 in aqueous precursor solution. At a zinc doping level ranging between 0.25 and 1.00 mol%, Zn doping is found to improve the CIS crystal growth and surface morphology of CIS films. Compared with the performance of the non-doped CIS cell, the Zn-doped CIS solar cell displayed a remarkable efficiency enhancement of 58-97% and the maximum enhancement was obtained at a Zn content of 0.5 mol%. The device structure consists of    and show promising PCE of 4.29 % without any anti-reflection coating. Over the course of 300 d under ambient condition, the fabricated device showed only 1% loss in efficiency.

cis-Dioxorhenium(V/VI) Complexes Supported by Neutral Tetradentate N4 Ligands. Synthesis, Characterization, and Spectroscopy.

PubMed

Ng, Vicky Yin-Ming; Tse, Chun-Wai; Guan, Xiangguo; Chang, Xiaoyong; Yang, Chen; Low, Kam-Hung; Lee, Hung Kay; Huang, Jie-Sheng; Che, Chi-Ming

2017-12-18

A series of cis-dioxorhenium(V) complexes containing chiral tetradentate N 4 ligands, including cis-[Re V (O) 2 (pyxn)] + (1; pyxn = N,N'-dimethyl-N,N'-bis(2-pyridylmethyl)cyclohexane-1,2-diamine), cis-[Re V (O) 2 (6-Me 2 pyxn)] + (cis-2), cis-[Re V (O) 2 (R,R-pdp)] + (3; R,R-pdp = 1,1'-bis((R,R)-2-pyridinylmethyl)-2,2'-bipyrrolidine), cis-[Re V (O) 2 (R,R-6-Me 2 pdp)] + (4), and cis-[Re V (O) 2 (bqcn)] + (5; bqcn = N,N'-dimethyl-N,N'-di(quinolin-8-yl)cyclohexane-1,2-diamine), were synthesized. Their structures were established by X-ray crystallography, showing Re-O distances in the range of 1.740(3)-1.769(8) Å and O-Re-O angles of 121.4(2)-124.8(4)°. Their cyclic voltammograms in MeCN (0.1 M [NBu 4 ]PF 6 ) display a reversible Re VI/V couple at E 1/2 = 0.39-0.49 V vs SCE. In aqueous media, three proton-coupled electron transfer reactions corresponding to Re VI/V , Re V/III , and Re III/II couples were observed at pH 1. The Pourbaix diagrams of 1·OTf, 3·OTf, and 5·OTf have been examined. The electronic absorption spectra of the cis-dioxorhenium(V) complexes show three absorption bands at around 800 nm (600-1730 dm 3 mol -1 cm -1 ), 580 nm (1700-5580 dm 3 mol -1 cm -1 ), and 462-523 nm (3170-6000 dm 3 mol -1 cm -1 ). Reaction of 1 with Lewis acids (or protic acids) gave cis-[Re V (O)(OH)(pyxn)] 2+ (1·H + ), in which the Re-O distances are lengthened to 1.788(5) Å. Complex cis-2 resulted from isomerization of trans-2 at elevated temperature. cis-[Re VI (O) 2 (pyxn)](PF 6 ) 2 (1'·(PF 6 ) 2 ) was obtained by constant-potential electrolysis of 1·PF 6 in MeCN (0.1 M [NBu 4 ]PF 6 ) at 0.56 V vs SCE; it displays shorter Re-O distances (1.722(4), 1.726(4) Å) and a smaller O-Re-O angle (114.88(18)°) relative to 1 and shows a d-d transition absorption band at 591 nm (ε = 77 dm 3 mol -1 cm -1 ). With a driving force of ca. 75 kcal mol -1 , 1' oxidizes hydrocarbons with weak C-H bonds (75.5-76.3 kcal mol -1 ) via hydrogen atom abstraction. DFT and TDDFT calculations on the electronic structures and spectroscopic properties of the cis-dioxorhenium(V/VI) complexes were performed.

Take a Trip Around a 3D Printing Lab (360)

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

Additive manufacturing has changed the way the world thinks about manufacture and design. Scientists and researchers at Lawrence Livermore National Lab are using a number of 3D printing processes to experiment with unique combinations of plastic, metal, and ceramics.

Molecular Dynamics Information Improves cis-Peptide-Based Function Annotation of Proteins.

PubMed

Das, Sreetama; Bhadra, Pratiti; Ramakumar, Suryanarayanarao; Pal, Debnath

2017-08-04

cis-Peptide bonds, whose occurrence in proteins is rare but evolutionarily conserved, are implicated to play an important role in protein function. This has led to their previous use in a homology-independent, fragment-match-based protein function annotation method. However, proteins are not static molecules; dynamics is integral to their activity. This is nicely epitomized by the geometric isomerization of cis-peptide to trans form for molecular activity. Hence we have incorporated both static (cis-peptide) and dynamics information to improve the prediction of protein molecular function. Our results show that cis-peptide information alone cannot detect functional matches in cases where cis-trans isomerization exists but 3D coordinates have been obtained for only the trans isomer or when the cis-peptide bond is incorrectly assigned as trans. On the contrary, use of dynamics information alone includes false-positive matches for cases where fragments with similar secondary structure show similar dynamics, but the proteins do not share a common function. Combining the two methods reduces errors while detecting the true matches, thereby enhancing the utility of our method in function annotation. A combined approach, therefore, opens up new avenues of improving existing automated function annotation methodologies.

Rapid detection of D-Dimers with mLabs® whole blood method for venous thromboembolism exclusion. Comparison with Vidas® D-Dimers assay.

PubMed

Gerotziafas, Grigoris T; Ray, Patrick; Gkalea, Vasiliki; Benzarti, Ahlem; Khaterchi, Amir; Cast, Claire; Pernet, Julie; Lefkou, Eleftheria; Elalamy, Ismail

2016-12-01

Easy to use point of care assays for D-Dimers measurement in whole blood from patients with clinical suspicion of venous thromboembolism (VTE) will facilitate the diagnostic strategy in the Emergency Department (ED) setting. We prospectively evaluated the diagnostic performance of the point-of-care mLabs® Whole Blood D-Dimers test and we compared it with the Vidas® D-Dimers assay. As part of the diagnostic algorithm applied in patients with clinical suspicion of VTE, the VIDAS® D-Dimers Test was prescribed by the emergency physician in charge. The mLabs® Whole Blood D-Dimers Test was used on the same samples. All patients had undergone exploration with the recommended imaging techniques for VTE diagnosis. Both assays were performed, on 99 emergency patients (mean age was 65 years) with clinical suspicion of VTE. In 3% of patients, VTE was documented with a reference imaging technique. The Bland and Altman test showed significant agreement between the two methods. Both assays showed equal sensitivity and negative predictive value for VTE. The mLabs whole blood assay is a promising point of care method for measurement of D-Dimers and exclusion of VTE diagnosis in the emergency setting which should be validated in a larger prospective study.

Using HPC within an operational forecasting configuration

NASA Astrophysics Data System (ADS)

Jagers, H. R. A.; Genseberger, M.; van den Broek, M. A. F. H.

2012-04-01

Various natural disasters are caused by high-intensity events, for example: extreme rainfall can in a short time cause major damage in river catchments, storms can cause havoc in coastal areas. To assist emergency response teams in operational decisions, it's important to have reliable information and predictions as soon as possible. This starts before the event by providing early warnings about imminent risks and estimated probabilities of possible scenarios. In the context of various applications worldwide, Deltares has developed an open and highly configurable forecasting and early warning system: Delft-FEWS. Finding the right balance between simulation time (and hence prediction lead time) and simulation accuracy and detail is challenging. Model resolution may be crucial to capture certain critical physical processes. Uncertainty in forcing conditions may require running large ensembles of models; data assimilation techniques may require additional ensembles and repeated simulations. The computational demand is steadily increasing and data streams become bigger. Using HPC resources is a logical step; in different settings Delft-FEWS has been configured to take advantage of distributed computational resources available to improve and accelerate the forecasting process (e.g. Montanari et al, 2006). We will illustrate the system by means of a couple of practical applications including the real-time dynamic forecasting of wind driven waves, flow of water, and wave overtopping at dikes of Lake IJssel and neighboring lakes in the center of The Netherlands. Montanari et al., 2006. Development of an ensemble flood forecasting system for the Po river basin, First MAP D-PHASE Scientific Meeting, 6-8 November 2006, Vienna, Austria.

Advanced Water Quality Modelling in Marine Systems: Application to the Wadden Sea, the Netherlands

NASA Astrophysics Data System (ADS)

Boon, J.; Smits, J. G.

2006-12-01

There is an increasing demand for knowledge and models that arise from water management in relation to water quality, sediment quality (ecology) and sediment accumulation (ecomorphology). Recently, models for sediment diagenesis and erosion developed or incorporated by Delft Hydraulics integrates the relevant physical, (bio)chemical and biological processes for the sediment-water exchange of substances. The aim of the diagenesis models is the prediction of both sediment quality and the return fluxes of substances such as nutrients and micropollutants to the overlying water. The resulting so-called DELWAQ-G model is a new, generic version of the water and sediment quality model of the DELFT3D framework. One set of generic water quality process formulations is used to calculate process rates in both water and sediment compartments. DELWAQ-G involves the explicit simulation of sediment layers in the water quality model with state-of-the-art process kinetics. The local conditions in a water layer or sediment layer such as the dissolved oxygen concentration determine if and how individual processes come to expression. New processes were added for sulphate, sulphide, methane and the distribution of the electron-acceptor demand over dissolved oxygen, nitrate, sulphate and carbon dioxide. DELWAQ-G also includes the dispersive and advective transport processes in the sediment and across the sediment-water interface. DELWAQ-G has been applied for the Wadden Sea. A very dynamic tidal and ecologically active estuary with a complex hydrodynamic behaviour located at the north of the Netherlands. The predicted profiles in the sediment reflect the typical interactions of diagenesis processes.

A Fast Multiple Sampling Method for Low-Noise CMOS Image Sensors With Column-Parallel 12-bit SAR ADCs.

PubMed

Kim, Min-Kyu; Hong, Seong-Kwan; Kwon, Oh-Kyong

2015-12-26

This paper presents a fast multiple sampling method for low-noise CMOS image sensor (CIS) applications with column-parallel successive approximation register analog-to-digital converters (SAR ADCs). The 12-bit SAR ADC using the proposed multiple sampling method decreases the A/D conversion time by repeatedly converting a pixel output to 4-bit after the first 12-bit A/D conversion, reducing noise of the CIS by one over the square root of the number of samplings. The area of the 12-bit SAR ADC is reduced by using a 10-bit capacitor digital-to-analog converter (DAC) with four scaled reference voltages. In addition, a simple up/down counter-based digital processing logic is proposed to perform complex calculations for multiple sampling and digital correlated double sampling. To verify the proposed multiple sampling method, a 256 × 128 pixel array CIS with 12-bit SAR ADCs was fabricated using 0.18 μm CMOS process. The measurement results shows that the proposed multiple sampling method reduces each A/D conversion time from 1.2 μs to 0.45 μs and random noise from 848.3 μV to 270.4 μV, achieving a dynamic range of 68.1 dB and an SNR of 39.2 dB.

Control of triacylglycerol biosynthesis in plants. Technical progress report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1993-01-31

Seeds of most species of the Umbelliferae (Apiaciae), Araliaceae, and Garryaceae families are characterized by their high content of the unusual C{sub 18} monounsaturated fatty acid petroselinic acid (18:l{Delta}{sup 6cis}). Prior to a recent report of this lab, little was known of the biosynthetic origin of the cis{Delta}{sup 6} double bond of petroselinic acid. Such knowledge may be of both biochemical and biotechnological significance. Because petroselinic acid is potentially the product of a novel desaturase, information regarding its synthesis may contribute to an understanding of fatty acid desaturation mechanisms in plants. Through chemical cleavage at its double bond, petroselinic acidmore » can be used as a precursor of lauric acid (12:0), a component of detergents and surfactants, and adipic acid (6:0 dicarboxylic), the monomeric component of nylon 6,6. Therefore, the development of an agronomic source of an oil rich in petroselinic acid is of biotechnological interest. As such, studies of petroselinic acid biosynthesis may provide basic information required for any attempt to genetically engineer the production and accumulation of this fatty acid in an existing oilseed.« less

Control of triacylglycerol biosynthesis in plants

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1993-01-31

Seeds of most species of the Umbelliferae (Apiaciae), Araliaceae, and Garryaceae families are characterized by their high content of the unusual C[sub 18] monounsaturated fatty acid petroselinic acid (18:l[Delta][sup 6cis]). Prior to a recent report of this lab, little was known of the biosynthetic origin of the cis[Delta][sup 6] double bond of petroselinic acid. Such knowledge may be of both biochemical and biotechnological significance. Because petroselinic acid is potentially the product of a novel desaturase, information regarding its synthesis may contribute to an understanding of fatty acid desaturation mechanisms in plants. Through chemical cleavage at its double bond, petroselinic acidmore » can be used as a precursor of lauric acid (12:0), a component of detergents and surfactants, and adipic acid (6:0 dicarboxylic), the monomeric component of nylon 6,6. Therefore, the development of an agronomic source of an oil rich in petroselinic acid is of biotechnological interest. As such, studies of petroselinic acid biosynthesis may provide basic information required for any attempt to genetically engineer the production and accumulation of this fatty acid in an existing oilseed.« less

Modelling large deformation and soil—water—structure interaction with material point method: Briefing on MPM2017 conference

NASA Astrophysics Data System (ADS)

Rohe, Alexander; Liang, Dongfang

2017-06-01

The 1st International Conference on the Material Point Method for "Modelling Large Deformation and Soil-Water-Structure Interaction" (MPM2017) was held in Delft, The Netherlands on 10-13 January 2017. This is the first conference organised by the Anura3D MPM Research Community, following a series of international workshops and symposia previously held in The Netherlands, UK, Spain and Italy, as part of the European Commission FP7 Marie-Curie project MPM-DREDGE. We are delighted to present seven contributions in this Special Column of the Journal of Hydrodynamics, and take this opportunity to announce that the 2nd conference, MPM2019, will be held in Cambridge, UK in January 2019.

Higher immunoglobulin production in conjugated linoleic acid-supplemented rats during gestation and suckling.

PubMed

Ramírez-Santana, Carolina; Pérez-Cano, Francisco J; Castellote, Cristina; Castell, Margarida; Rivero, Montserrat; Rodríguez-Palmero, María; Franch, Angels

2009-09-01

Conjugated linoleic acid (CLA) has been reported to exert beneficial physiological effects on body composition and the immune system. However, little information is available on the influence of CLA on immune function during early life periods. The present study evaluates the effect of feeding an 80:20 mixture of cis-9, trans-11- and trans-10, cis-12-CLA isomers during gestation and suckling on the systemic immune response of weaned Wistar rats. Pups received dietary CLA from dams through the placental barrier and during suckling by breast milk (group A) or by oral administration (group B). Pups from group C only received CLA during suckling by oral administration. Group D constituted the reference group. Milk from dams fed the CLA diet had a high content of CLA and higher IgA and IgG concentrations than rats fed the standard diet. The plasma of pups from groups A, B and C showed six, twelve and nine times higher content of the cis-9, trans-11-CLA isomer than that of the group D pups. Rats from group A exhibited higher serum IgG concentrations than rats from the rest of the groups (22.14 (SEM 2.14) v. about 5 mg/ml; P < 0.05), whereas rats from groups A and B showed approximately 2-fold higher splenocyte IgM production than rats from groups C and D. However, CLA supplementation did not influence significantly the splenocyte proliferative response or cytokine secretion. Supplementation during gestation and suckling with an 80:20 cis-9, trans-11-trans-10, cis-12 CLA mix enhances the production of the main in vivo and in vitro Ig isotypes in Wistar rats.

5-aminoisoquinoline improves renal function and fibrosis during recovery phase of cisplatin-induced acute kidney injury in rats.

PubMed

Quesada, Andrés; O'Valle, Francisco; Montoro-Molina, Sebastián; Gómez-Morales, Mercedes; Caba-Molina, Mercedes; González, Juan Francisco; de Gracia, María C; Osuna, Antonio; Vargas, Félix; Wangensteen, Rosemary

2018-04-27

The aim of the present study is to analyze the effects of 5-aminoisoquinoline (5-AIQ), a poly(ADP-ribose) polymerase-1 (PARP1) inhibitor, over renal dysfunction and fibrosis during recovery phase of cisplatin (CisPt)-induced acute kidney injury (AKI) in rats. Male Wistar rats were distributed in three groups ( n =8 each group): control, CisPt, and CisPt + 5-AIQ. Control and CisPt groups received a subcutaneous injection of either saline or 7 mg/kg CisPt, respectively. CisPt + 5-AIQ group received two intraperitoneal injections of 10 mg/kg 5-AIQ 2 h before and 24 h after CisPt treatment. Thirteen days after the treatment, rats were housed in metabolic cages and 24-h urine collection was made. At day 14, CisPt-treated rats showed increased diuresis, N-acetyl-β-d-glucosaminidase (NAG) excretion, glucosuria and sodium fractional excretion (NaFE), and decreased creatinine clearance (CrCl). 5-AIQ significantly increased CrCl and decreased NAG excretion, glucosuria, and NaFE. In plasma, CisPt increased sodium, urea, and creatinine concentrations, while 5-AIQ treatment decreased these variables to the levels of control group. 5-AIQ completely prevented the body weight loss evoked by CisPt treatment. CisPt also induced an increased renal expression of PAR polymer, α-smooth muscle actin (α-SMA), transforming growth factor-β1 (TGF-β1), and collagen-IV. These variables were decreased in CisPt + 5-AIQ group. Tubular lesions and renal fibrosis were also decreased by 5-AIQ treatment. We conclude that inhibition of PARP1 with 5-AIQ can attenuate long-term nephrotoxic effects associated with the CisPt treatment, preventing renal dysfunction and body weight decrease and ameliorating tubular lesions and collagen deposition. © 2018 The Author(s).

5-aminoisoquinoline improves renal function and fibrosis during recovery phase of cisplatin-induced acute kidney injury in rats

PubMed Central

Quesada, Andrés; O’Valle, Francisco; Montoro-Molina, Sebastián; Gómez-Morales, Mercedes; Caba-Molina, Mercedes; González, Juan Francisco; de Gracia, María C.; Osuna, Antonio; Vargas, Félix; Wangensteen, Rosemary

2018-01-01

The aim of the present study is to analyze the effects of 5-aminoisoquinoline (5-AIQ), a poly(ADP-ribose) polymerase-1 (PARP1) inhibitor, over renal dysfunction and fibrosis during recovery phase of cisplatin (CisPt)-induced acute kidney injury (AKI) in rats. Male Wistar rats were distributed in three groups (n=8 each group): control, CisPt, and CisPt + 5-AIQ. Control and CisPt groups received a subcutaneous injection of either saline or 7 mg/kg CisPt, respectively. CisPt + 5-AIQ group received two intraperitoneal injections of 10 mg/kg 5-AIQ 2 h before and 24 h after CisPt treatment. Thirteen days after the treatment, rats were housed in metabolic cages and 24-h urine collection was made. At day 14, CisPt-treated rats showed increased diuresis, N-acetyl-β-d-glucosaminidase (NAG) excretion, glucosuria and sodium fractional excretion (NaFE), and decreased creatinine clearance (CrCl). 5-AIQ significantly increased CrCl and decreased NAG excretion, glucosuria, and NaFE. In plasma, CisPt increased sodium, urea, and creatinine concentrations, while 5-AIQ treatment decreased these variables to the levels of control group. 5-AIQ completely prevented the body weight loss evoked by CisPt treatment. CisPt also induced an increased renal expression of PAR polymer, α-smooth muscle actin (α-SMA), transforming growth factor-β1 (TGF-β1), and collagen-IV. These variables were decreased in CisPt + 5-AIQ group. Tubular lesions and renal fibrosis were also decreased by 5-AIQ treatment. We conclude that inhibition of PARP1 with 5-AIQ can attenuate long-term nephrotoxic effects associated with the CisPt treatment, preventing renal dysfunction and body weight decrease and ameliorating tubular lesions and collagen deposition. PMID:29599129

Cordilleran Ice Sheet mass loss preceded climate reversals near the Pleistocene Termination

NASA Astrophysics Data System (ADS)

Menounos, B.; Goehring, B. M.; Osborn, G.; Margold, M.; Ward, B.; Bond, J.; Clarke, G. K. C.; Clague, J. J.; Lakeman, T.; Koch, J.; Caffee, M. W.; Gosse, J.; Stroeven, A. P.; Seguinot, J.; Heyman, J.

2017-11-01

The Cordilleran Ice Sheet (CIS) once covered an area comparable to that of Greenland. Previous geologic evidence and numerical models indicate that the ice sheet covered much of westernmost Canada as late as 12.5 thousand years ago (ka). New data indicate that substantial areas throughout westernmost Canada were ice free prior to 12.5 ka and some as early as 14.0 ka, with implications for climate dynamics and the timing of meltwater discharge to the Pacific and Arctic oceans. Early Bølling-Allerød warmth halved the mass of the CIS in as little as 500 years, causing 2.5 to 3.0 meters of sea-level rise. Dozens of cirque and valley glaciers, along with the southern margin of the CIS, advanced into recently deglaciated regions during the Bølling-Allerød and Younger Dryas.

Characterising the slope of the distance-time relationship in swimming.

PubMed

Dekerle, J; Brickley, G; Alberty, M; Pelayo, P

2010-05-01

The aim of the present study was to assess whether the critical speed calculated by the slope of the distance-time relationship (S(d-t)) represents the boundary between the heavy and severe intensity domains in swimming and would be sustainable during intermittent exercise. Nine competitive male swimmers (mean+/-SD: aged 21.2+/-2.6 yrs; peak (.)VO2 of 3866+/-529 mL min(-1)) performed, (a) four fixed-distance (100-200-400-800 m) all-out efforts to determine S(d-t) and peak (.)VO2; (b) three constant-speed efforts to exhaustion (TTE) at and 5% above and below S(d-t) (S(d-t)(+5%) and S(d-t)(-5%), respectively); (c) a set of 10 x 400 m at S(d-t) with 40-s recovery in between. Capillary blood lactate concentration ([La](B)), oxygen uptake ((.)VO2), and RPE remained stable at S(d-t)(-5%) (TTE=48.9+/-14.1 min) with end values of 3.8+/-1.9 mmol L(-1), 87+/-14% peak (.)VO2, and 4.7+/-1.3. TTE decreased at S(d-t)(+5%) (8.6+/-3.1 min), with end [La](B) of 10.2+/-1.9 mmol L(-1). Peak (.)VO2 was reached at exhaustion. Similarly, S(d-t) could only be maintained for 24.3+/-7.7 min with an increase in RPE and [La](B), (.)VO2 reaching its peak (95+/-5% peak VO2). RPE increased but [La](B) remained stable throughout the ten 400 m blocks performed at S(d-t) (overall time of 53.9+/-2.7 min). The physiological responses when swimming 5% below and 5% above S(d-t) are those characterising the heavy and severe intensity domain, respectively. While S(d-t) lies within the severe intensity domain, intermittent swims at this intensity induce [La](B) steady state alongside high rates of perceived exertion. 2009 Sports Medicine Australia. All rights reserved.

Annual Conference on Human Retrovirus Testing (7th) held in Chicago, IL on March 3-5, 1992

DTIC Science & Technology

1993-04-05

Ph.D.; Charles Sehable, M.S.; Judith Wethers , M.S.; Judith Wilber, Ph.D. This conference was supported, in part, by a firancial graot from the...Westerman Bill Roberts Judith Wethers , M.S. U Col Chester Roberts, Ph.D. Julianne Wiese Jeanette V Roman Helen Wiprud Gene F Robertson, Ph.D. JoAnn L Yee...RHgmor Thorstensson, Ph.D., National Judith Wethers , M.S., Director of Testing Bacteriological Lab Services. Retrovirology Lab.. New York Ralph

Editorial

NASA Astrophysics Data System (ADS)

Gill, Eberhard

2016-06-01

This Special Section of Acta Astronautica is a collection of selected peer reviewed papers presented at the eighth International Workshop on Satellite Constellations and Formation Flying (IWSCFF). The event was, as its predecessors, organized by the Astrodynamics Committee of the International Astronautical Federation (IAF) with the objective to bring together specialists in the area of astrodynamics and space mission analysis and design and to promote discussions on lessons from past missions, to present recent results, and to address challenges for future space missions. The Workshop was held at the Faculty of Aerospace Engineering of the Delft University of Technology from June 8-10, 2015. The Workshop was coordinated by its Chairs Eberhard Gill (The Netherlands) and Alfred Ng (Canada) with support from the recently established TU Delft Space Institute, an extended International Program Committee, a Local Organizing Committee and a variety of industrial and institutional sponsors.

[Little animals observed by Antony van Leeuwenhoek].

PubMed

Amako, Kazunobu

2014-01-01

Antony van Leeuwenhoek is the discoverer of bacteria and other microorganisms. However, his name is currently not as well-known as those of Louis Pasteur, Robert Koch or Shibasaburo Kitasato. Why not? To answer this question I read a book published in 1932 by Clifford Dobell, an English protozoologist, and found some answers. First, Leeuwenhoek was not a professional scientist in any university or scientific institute, but merely an average citizen in Delft, Holland, working as a merchant in his own shop, and later he also served as an office-holder in Delft city hall. Second, he made and invented his own microscopes but never made his work on microscopes and observation techniques widely known to the public. Accordingly, after his death, his excellent techniques for observing microorganisms were not handed down to the next generation and eventually became forgotten by the scientific community. Although he did not write any scientific paper, he did write about his observations in many letters addressed to the Royal Society of London. Dr. Dobell had translated most of them into English and included them in his book. I picked up and translated several of these letters into Japanese and have included them in this review to show how he described his observations and also what he thought about the presence of such small animals invisible to the naked eye. By reading this review I hope you will come to understand the efforts and abilities of a citizen in Delft about 340 years ago.

Transient-Absorption Spectroscopy of Cis-Trans Isomerization of N,N-dimethyl-4,4'-Azodianiline with 3D-Printed Temperature-Controlled Sample Holder

ERIC Educational Resources Information Center

Kosenkov, Dmytro; Shaw, James; Zuczek, Jennifer; Kholod, Yana

2016-01-01

The laboratory unit demonstrates a project based approach to teaching physical chemistry laboratory where upper-division undergraduates carry out a transient-absorption experiment investigating the kinetics of cis-trans isomerization of N,N-dimethyl-4,4'-azodianiline. Students participate in modification of a standard flash-photolysis spectrometer…

Distortions induced in double-stranded oligonucleotides by the binding of cis- or trans-diammine-dichloroplatinum(II) to the d(GTG) sequence.

PubMed Central

Anin, M F; Leng, M

1990-01-01

Conformational changes induced in double-stranded oligonucleotides by the binding of trans- or cis-diamminedichloro platinum(II) to the d(GTG) sequence have been characterized by means of melting temperatures, electrophoretic migrations in non-denaturing polyacrylamide gels, reactivities with the artificial nuclease Phenanthroline-copper and with chemical probes. The cis-platinum adduct behaves more as a centre of directed bend than as a hinge joint, the induced bend angle being of the order of 25-30 degrees. The double helix is locally denatured over 2 base pairs (corresponding to the platinated 5'G residue and the central T residue) and is distorted over 4-5 base pairs. The trans-platinum adduct behaves also more as a centre of directed bend than as a hinge joint, the induced bend angle being of the order of 60 degrees. The double helix is locally denatured over 4 base pairs (corresponding to the immediately 5'T residue adjacent to the adduct and to the three base residues of the adduct). Both the cis- and trans-platinum adducts decrease the thermal stability of the double helix. Images PMID:2388824

Fine Structure Processing improves speech perception as well as objective and subjective benefits in pediatric MED-EL COMBI 40+ users.

PubMed

Lorens, Artur; Zgoda, Małgorzata; Obrycka, Anita; Skarżynski, Henryk

2010-12-01

Presently, there are only few studies examining the benefits of fine structure information in coding strategies. Against this background, this study aims to assess the objective and subjective performance of children experienced with the C40+ cochlear implant using the CIS+ coding strategy who were upgraded to the OPUS 2 processor using FSP and HDCIS. In this prospective study, 60 children with more than 3.5 years of experience with the C40+ cochlear implant were upgraded to the OPUS 2 processor and fit and tested with HDCIS (Interval I). After 3 months of experience with HDCIS, they were fit with the FSP coding strategy (Interval II) and tested with all strategies (FSP, HDCIS, CIS+). After an additional 3-4 months, they were assessed on all three strategies and asked to choose their take-home strategy (Interval III). The children were tested using the Adaptive Auditory Speech Test which measures speech reception threshold (SRT) in quiet and noise at each test interval. The children were also asked to rate on a Visual Analogue Scale their satisfaction and coding strategy preference when listening to speech and a pop song. However, since not all tests could be performed at one single visit, some children were not able complete all tests at all intervals. At the study endpoint, speech in quiet showed a significant difference in SRT of 1.0 dB between FSP and HDCIS, with FSP performing better. FSP proved a better strategy compared with CIS+, showing lower SRT results of 5.2 dB. Speech in noise tests showed FSP to be significantly better than CIS+ by 0.7 dB, and HDCIS to be significantly better than CIS+ by 0.8 dB. Both satisfaction and coding strategy preference ratings also revealed that FSP and HDCIS strategies were better than CIS+ strategy when listening to speech and music. FSP was better than HDCIS when listening to speech. This study demonstrates that long-term pediatric users of the COMBI 40+ are able to upgrade to a newer processor and coding strategy without compromising their listening performance and even improving their performance with FSP after a short time of experience. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

A theoretical study of the hydrogen bonding between the vic-, cis- and trans-C 2H 2F 2 isomers and hydrogen fluoride

NASA Astrophysics Data System (ADS)

Rusu, Victor H.; da Silva, João Bosco P.; Ramos, Mozart N.

2009-04-01

MP2/6-31++G(d,p) and B3LYP/6-31++G(d,p) theoretical calculations have been employed to investigate the hydrogen bonding formation involving the vic-, cis- and trans-C 2H 2F 2 isomers and hydrogen fluoride. Our calculations have revealed for each isomer the preferential existence of two possible hydrogen-bonded complexes: a non-cyclic complex and a cyclic complex. For all the three isomers the binding energies for the non-cyclic and cyclic hydrogen complexes are essentially equal using both the MP2 and B3LYP calculations, being that the cyclic structure is slightly more stable. For instance, the binding energies including BSSE and ZPE corrections for the non-cyclic and cyclic structures of cis-C 2H 2F···HF are 8.7 and 9.0 kJ mol -1, respectively, using B3LYP calculations. The cyclic complex formation reduces the polarity, in contrast to what occurs with the non-cyclic complex. This result is more accentuated in vic-C 2H 2F 2···HF. In this latter, Δ μ(cyclic) is -3.07 D, whereas Δ μ(non-cyclic) is +1.92 D using B3LYP calculations. Their corresponding MP2 values are +0.44 D and -1.89 D, respectively. As expected, the complexation produces an H sbnd F stretching frequency downward shift, whereas its IR intensity is enhanced. On the other hand, the vibrational modes of the vic-, cis- and trans-C 2H 2F 2 isomers are little affected by complexation. The new vibrational modes due to hydrogen bonding formation show several interesting features, in particular the HF bending modes which are pure rotations in the free molecule.

Operational aspects of asynchronous filtering for improved flood forecasting

NASA Astrophysics Data System (ADS)

Rakovec, Oldrich; Weerts, Albrecht; Sumihar, Julius; Uijlenhoet, Remko

2014-05-01

Hydrological forecasts can be made more reliable and less uncertain by recursively improving initial conditions. A common way of improving the initial conditions is to make use of data assimilation (DA), a feedback mechanism or update methodology which merges model estimates with available real world observations. The traditional implementation of the Ensemble Kalman Filter (EnKF; e.g. Evensen, 2009) is synchronous, commonly named a three dimensional (3-D) assimilation, which means that all assimilated observations correspond to the time of update. Asynchronous DA, also called four dimensional (4-D) assimilation, refers to an updating methodology, in which observations being assimilated into the model originate from times different to the time of update (Evensen, 2009; Sakov 2010). This study investigates how the capabilities of the DA procedure can be improved by applying alternative Kalman-type methods, e.g., the Asynchronous Ensemble Kalman Filter (AEnKF). The AEnKF assimilates observations with smaller computational costs than the original EnKF, which is beneficial for operational purposes. The results of discharge assimilation into a grid-based hydrological model for the Upper Ourthe catchment in Belgian Ardennes show that including past predictions and observations in the AEnKF improves the model forecasts as compared to the traditional EnKF. Additionally we show that elimination of the strongly non-linear relation between the soil moisture storage and assimilated discharge observations from the model update becomes beneficial for an improved operational forecasting, which is evaluated using several validation measures. In the current study we employed the HBV-96 model built within a recently developed open source modelling environment OpenStreams (2013). The advantage of using OpenStreams (2013) is that it enables direct communication with OpenDA (2013), an open source data assimilation toolbox. OpenDA provides a number of algorithms for model calibration and assimilation and is suitable to be connected to any kind of environmental model. This setup is embedded in the Delft Flood Early Warning System (Delft-FEWS, Werner et al., 2013) for making all simulations and forecast runs and handling of all hydrological and meteorological data. References: Evensen, G. (2009), Data Assimilation: The Ensemble Kalman Filter, Springer, doi:10.1007/978-3-642-03711-5. OpenDA (2013), The OpenDA data-assimilation toolbox, www.openda.org, (last access: 1 November 2013). OpenStreams (2013), OpenStreams, www.openstreams.nl, (last access: 1 November 2013). Sakov, P., G. Evensen, and L. Bertino (2010), Asynchronous data assimilation with the EnKF, Tellus, Series A: Dynamic Meteorology and Oceanography, 62(1), 24-29, doi:10.1111/j.1600-0870.2009.00417.x. Werner, M., J. Schellekens, P. Gijsbers, M. van Dijk, O. van den Akker, and K. Heynert (2013), The Delft-FEWS flow forecasting system, Environ. Mod. & Soft., 40(0), 65-77, doi: http://dx.doi.org/10.1016/j.envsoft.2012.07.010.

Army Reserve Component Personal Empowerment Program #2t

DTIC Science & Technology

2013-10-01

rescheduling of appointments • Retrieved lab reports from hospital lab for 161 participants 8 • Identified abnormal values and sent copies to campus nurse ...recommendation of SHU Scientific Committee • Collaborated with SHU nurse to establish procedure for abnormal lab values • Implemented suggested...results were encouraged to discuss further with nurse as per protocol. • Researched literature concerning vitamin D to better understand lab results

Computational exploration of cis-regulatory modules in rhythmic expression data using the "Exploration of Distinctive CREs and CRMs" (EDCC) and "CRM Network Generator" (CNG) programs.

PubMed

Bekiaris, Pavlos Stephanos; Tekath, Tobias; Staiger, Dorothee; Danisman, Selahattin

2018-01-01

Understanding the effect of cis-regulatory elements (CRE) and clusters of CREs, which are called cis-regulatory modules (CRM), in eukaryotic gene expression is a challenge of computational biology. We developed two programs that allow simple, fast and reliable analysis of candidate CREs and CRMs that may affect specific gene expression and that determine positional features between individual CREs within a CRM. The first program, "Exploration of Distinctive CREs and CRMs" (EDCC), correlates candidate CREs and CRMs with specific gene expression patterns. For pairs of CREs, EDCC also determines positional preferences of the single CREs in relation to each other and to the transcriptional start site. The second program, "CRM Network Generator" (CNG), prioritizes these positional preferences using a neural network and thus allows unbiased rating of the positional preferences that were determined by EDCC. We tested these programs with data from a microarray study of circadian gene expression in Arabidopsis thaliana. Analyzing more than 1.5 million pairwise CRE combinations, we found 22 candidate combinations, of which several contained known clock promoter elements together with elements that had not been identified as relevant to circadian gene expression before. CNG analysis further identified positional preferences of these CRE pairs, hinting at positional information that may be relevant for circadian gene expression. Future wet lab experiments will have to determine which of these combinations confer daytime specific circadian gene expression.

Computational exploration of cis-regulatory modules in rhythmic expression data using the “Exploration of Distinctive CREs and CRMs” (EDCC) and “CRM Network Generator” (CNG) programs

PubMed Central

Staiger, Dorothee

2018-01-01

Understanding the effect of cis-regulatory elements (CRE) and clusters of CREs, which are called cis-regulatory modules (CRM), in eukaryotic gene expression is a challenge of computational biology. We developed two programs that allow simple, fast and reliable analysis of candidate CREs and CRMs that may affect specific gene expression and that determine positional features between individual CREs within a CRM. The first program, “Exploration of Distinctive CREs and CRMs” (EDCC), correlates candidate CREs and CRMs with specific gene expression patterns. For pairs of CREs, EDCC also determines positional preferences of the single CREs in relation to each other and to the transcriptional start site. The second program, “CRM Network Generator” (CNG), prioritizes these positional preferences using a neural network and thus allows unbiased rating of the positional preferences that were determined by EDCC. We tested these programs with data from a microarray study of circadian gene expression in Arabidopsis thaliana. Analyzing more than 1.5 million pairwise CRE combinations, we found 22 candidate combinations, of which several contained known clock promoter elements together with elements that had not been identified as relevant to circadian gene expression before. CNG analysis further identified positional preferences of these CRE pairs, hinting at positional information that may be relevant for circadian gene expression. Future wet lab experiments will have to determine which of these combinations confer daytime specific circadian gene expression. PMID:29298348

CisMiner: Genome-Wide In-Silico Cis-Regulatory Module Prediction by Fuzzy Itemset Mining

PubMed Central

Navarro, Carmen; Lopez, Francisco J.; Cano, Carlos; Garcia-Alcalde, Fernando; Blanco, Armando

2014-01-01

Eukaryotic gene control regions are known to be spread throughout non-coding DNA sequences which may appear distant from the gene promoter. Transcription factors are proteins that coordinately bind to these regions at transcription factor binding sites to regulate gene expression. Several tools allow to detect significant co-occurrences of closely located binding sites (cis-regulatory modules, CRMs). However, these tools present at least one of the following limitations: 1) scope limited to promoter or conserved regions of the genome; 2) do not allow to identify combinations involving more than two motifs; 3) require prior information about target motifs. In this work we present CisMiner, a novel methodology to detect putative CRMs by means of a fuzzy itemset mining approach able to operate at genome-wide scale. CisMiner allows to perform a blind search of CRMs without any prior information about target CRMs nor limitation in the number of motifs. CisMiner tackles the combinatorial complexity of genome-wide cis-regulatory module extraction using a natural representation of motif combinations as itemsets and applying the Top-Down Fuzzy Frequent- Pattern Tree algorithm to identify significant itemsets. Fuzzy technology allows CisMiner to better handle the imprecision and noise inherent to regulatory processes. Results obtained for a set of well-known binding sites in the S. cerevisiae genome show that our method yields highly reliable predictions. Furthermore, CisMiner was also applied to putative in-silico predicted transcription factor binding sites to identify significant combinations in S. cerevisiae and D. melanogaster, proving that our approach can be further applied genome-wide to more complex genomes. CisMiner is freely accesible at: http://genome2.ugr.es/cisminer. CisMiner can be queried for the results presented in this work and can also perform a customized cis-regulatory module prediction on a query set of transcription factor binding sites provided by the user. PMID:25268582

Attraction of New Zealand flower thrips, Thrips obscuratus, to cis-jasmone, a volatile identified from Japanese honeysuckle flowers.

PubMed

El-Sayed, A M; Mitchell, V J; McLaren, G F; Manning, L M; Bunn, B; Suckling, D M

2009-06-01

This work was undertaken to identify floral compound(s) produced by honeysuckle flowers, Lonicera japonica (Thunberg), that mediate the attraction of New Zealand flower thrips Thrips obscuratus (Crawford). Volatiles were collected during the day and night and analyzed by gas chromatography-mass spectrometry (GC-MS) to determine their emission over these two periods. Nine compounds were identified in the headspace; the main compound was linalool, and the other compounds were germacrene D, E,E-alpha-farnesene, nerolidol, cis-jasmone, cis-3-hexenyl acetate, hexyl acetate, cis-hexenyl tiglate, and indole. There was a quantitative difference between day and night volatiles, with cis-3-hexenyl acetate, hexyl acetate, cis-hexenyl tiglate, and cis-jasmone emitted in higher amounts during the day compared to the night. When the compounds were tested individually in field trapping experiments, only cis-jasmone attracted New Zealand flower thrips in a significant number. In another field trapping experiment, cis-jasmone caught similar numbers of New Zealand flower thrips compared to a floral blend formulated to mimic the ratios of the compounds emitted during the day, while catch with the night-emitted floral blend was not significantly different from the control. Subsequently, two field trapping experiments were conducted to determine the optimal attraction dose for cis-jasmone, a range of 1-100 mg loaded onto a red rubber stopper was tested, and the highest catches were in traps baited with 100 mg loading. A higher range of 100-1000 mg loaded into polyethylene vials was tested, and the highest catch was in traps baited with 500 mg. In another experiment aimed at comparing the attraction efficacy of cis-jasmone with the two other known thrips attractants (ethyl nicotinate and p-anisaldehyde), ethyl nicotinate showed the highest trap catch followed by cis-jasmone. A smaller number of Thrips tabaci (Lindeman) was attracted to traps baited with cis-jasmone. These results suggest that cis-jasmone might act as a kairomone that mediates the attraction of New Zealand flower thrips to the flowers of the Japanese honeysuckle.

Density functional theory study of structural and electronic properties of trans and cis structures of thiothixene as a nano-drug.

PubMed

Noori Tahneh, Akram; Bagheri Novir, Samaneh; Balali, Ebrahim

2017-11-25

The geometrical structure, electronic and optical properties, electronic absorption spectra, vibrational frequencies, natural charge distribution, MEP analysis and thermodynamic properties of the trans and cis structures of the drug thiothixene were investigated using density functional theory (DFT) and time-dependent DFT (TDDFT) methods with the B3LYP hybrid functional and 6-311 + G(d,p) basis set. The results of the calculations demonstrate that the cis structure of thiothixene has appropriate quantum properties that can act as an active medicine. The relative energies of trans and cis structures of thiothixene shows that the cis structure is more stable than the trans structure, with a small energy difference. TDDFT calculations show that the cis structure of thiothixene has the best absorption properties. The calculated NLO properties show that the NLO properties of the cis structure of thiothixene are higher than the trans structure, and the fact that the chemical hardness of the cis structure is lower than that of the trans structure that indicates that the reactivity and charge transfer of the cis isomer of thiothixene is higher than that of trans thiothixene. The molecular electrostatic potential (MEP) maps of both structures of thiothixene demonstrate that the oxygen atoms of the molecule are appropriate areas for electrophilic reactions. The vibrational frequencies of the two conformations of thiothixene demonstrate that both structures of thiothixene have almost similar modes of vibrations. The calculated thermodynamic parameters show that these quantities increase with enhancing temperature due to the enhancement of molecular vibrational intensities with temperature. Graphical abstract Trans/Cis isomerization of thiothixene drug.

Stepwise cycloaddition reaction of N-phenacylbenzothiazolium bromides and nitroalkenes for tetrahydro-, dihydro- and benzo[d]pyrrolo[2,1-b]thiazoles

NASA Astrophysics Data System (ADS)

Jin, Gong; Sun, Jing; Yang, Ren-Yin; Yan, Chao-Guo

2017-04-01

The triethylamine promoted stepwise 1,3-dipolar cycloaddition reaction of N-phenacylbenzothiazolium bromides with nitroalkenes in ethanol resulted in a mixture of two isomeric tetrahydrobenzo[d]pyrrolo[2,1-b]thiazoles with cis/trans/cis- and all-trans-configurations. More importantly, the corresponding dihydrobenzo[d]pyrrolo[2,1-b]thiazoles can be selectively prepared in refluxing ethanol and the benzo[d]pyrrolo[2,1-b]thiazoles can be obtained in satisfactory yields by sequential dehydrogenation with DDQ as oxidizer. On the other hand, the similar cycloaddition reaction of N-phenacylbenzothiazolium bromides with 1-methy-1-nitroalkenes in refluxing ethanol afforded benzo[d]pyrrolo[2,1-b]thiazoles with splitting out of nitro group. The stereochemistry of the spiro compounds was clearly elucidated on the basis of NMR spectra and sixteen single crystal structures.

REMPI and MATI spectroscopy of cis and trans 4-chloro-3-fluoroanisole

NASA Astrophysics Data System (ADS)

Liu, Sheng; Dai, Wenshuai; Lin, Dan; Cheng, Min; Du, YiKui; Zhu, Qihe

2017-08-01

The Resonance-enhanced two-photon ionization (R2PI) and Mass-analyzed threshold ionization (MATI) spectra of 4-chloro-3-fluoroanisole (4Cl3FA) were recorded in detail. The experimental and calculated results revealed that cis and trans 4Cl3FA are the only two stable conformers in each of the S0, S1 and D0 states. The first electronic excitation energies (E1's) of cis and trans35Cl-4Cl3FA were measured to be 35,326 ± 3 and 35,443 ± 3 cm-1 by the R2PI spectroscopy and the corresponding adiabatic ionization energies (IEs) were determined to be 67,330 ± 5 and 67,591 ± 5 cm-1 by the MATI spectroscopy. The E1's and IEs of cis and trans37Cl-4Cl3FA were also obtained and found to be identical to that of the 35Cl-4Cl3FA conformers. Compared with the trans 4Cl3FA, the cis 4Cl3FA is more stable in the S0, S1 and D0 states. The vibrational bands observed in the R2PI and MATI spectra are related to the vibrations involving the in-plane deformation of the benzene ring, the CH3 torsion and the OCH3 inversion. The substituent effects on the molecular structures, transition energies and vibrations of 4Cl3FA are discussed.

A Fast Multiple Sampling Method for Low-Noise CMOS Image Sensors With Column-Parallel 12-bit SAR ADCs

PubMed Central

Kim, Min-Kyu; Hong, Seong-Kwan; Kwon, Oh-Kyong

2015-01-01

This paper presents a fast multiple sampling method for low-noise CMOS image sensor (CIS) applications with column-parallel successive approximation register analog-to-digital converters (SAR ADCs). The 12-bit SAR ADC using the proposed multiple sampling method decreases the A/D conversion time by repeatedly converting a pixel output to 4-bit after the first 12-bit A/D conversion, reducing noise of the CIS by one over the square root of the number of samplings. The area of the 12-bit SAR ADC is reduced by using a 10-bit capacitor digital-to-analog converter (DAC) with four scaled reference voltages. In addition, a simple up/down counter-based digital processing logic is proposed to perform complex calculations for multiple sampling and digital correlated double sampling. To verify the proposed multiple sampling method, a 256 × 128 pixel array CIS with 12-bit SAR ADCs was fabricated using 0.18 μm CMOS process. The measurement results shows that the proposed multiple sampling method reduces each A/D conversion time from 1.2 μs to 0.45 μs and random noise from 848.3 μV to 270.4 μV, achieving a dynamic range of 68.1 dB and an SNR of 39.2 dB. PMID:26712765

The influence of temperature on the work function of W, LaB 6 and pseudo-alloys

NASA Astrophysics Data System (ADS)

Bulyga, A. V.; Solonovich, V. K.

1989-12-01

The experimental temperature dependences α f = d F/d T of the work function F = F( T) for W(111), LaB 6(100) and W-Ni-LaB 6 pseudo-alloy surfaces emitting thermoelectrons are compared with α f predicted by the Hohenberg-Lang-Kohn theory.

Use of polyvalent equine anti-viper serum to treat delayed coagulopathy due to suspected Sistrurus miliarius streckeri envenomation in two children.

PubMed

Williams, Kristie L; Woslager, Megan; Garland, Stephanie L; Barton, Roger P; Banner, William

2017-06-01

Western Pygmy Rattlesnake (WPR) envenomation reportedly causes refractory and persistent coagulopathy when treated with CroFab ® (Crotalidae Polyvalent Immune Fab). We report two cases where polyvalent equine anti-viper serum (AntivipmynTRI ® ) was used to treat recurrent coagulopathy in children. The first patient was a 16-month-old male who was bitten by a confirmed WPR. The patient received a total of 18 vials of CroFab ® . His labs normalized, swelling gradually improved, and the child was discharged to home. On day 5, the child returned to the emergency department with a great deal of inguinal tenderness. Labs were obtained and the child's INR was >13.1, while the fibrinogen was <60 mg/dL and the d-dimer was 11.72 mg/L. A decision was made to administer Antivipmyn TRI ® , and the child received a total of 10 vials. Lab values significantly improved: INR 1.2, fibrinogen 93 mg/dL, and d-dimer 4.21 mg/L. The second patient was a 20-month-old male who presented following snake envenomation. The child was administered a total of 22 vials of CroFab ® over approximately 70 h following envenomation. Physical exam continued to improve, however, lab results showed an increasing INR 1.98, decreasing platelet count 124 × 10 3 per μL, fibrinogen <60 mg/dL, and d-dimer >20 ug/mL. A total of 15 vials of Antivipmyn TRI ® were administered to this patient. Following this administration, labs and clinical exam both significantly improved. Labs revealed INR 1.16, fibrinogen 110 mg/dL, d-dimer 3.2 mg/L and platelet count 215 × 10 3 /μL. CroFab ® is still the first-line treatment for children bitten by a WPR, but in some cases patients develop a recurrent coagulopathy. The rapid response demonstrated by Antivipmyn TRI ® leads us to conclude that this is a potential therapy for this clinical situation.

Pre-Steady State Kinetic Analysis of cis-3-Chloroacrylic Acid Dehalogenase: Analysis and Implications†

PubMed Central

Robertson, Brooklyn A.; Schroeder, Gottfried K.; Jin, Zhinan; Johnson, Kenneth A.; Whitman, Christian P.

2009-01-01

Isomer-specific 3-chloroacrylic acid dehalogenases catalyze the hydrolytic dehalogenation of the cis- and trans-isomers of 3-chloroacrylate to yield malonate semialdehyde. These reactions represent key steps in the degradation of the nematocide, 1,3-dichloropropene. The kinetic mechanism of cis-3-chloroacrylic acid dehalogenase (cis-CaaD) has now been examined using stopped-flow and chemical-quench techniques. Stopped-flow analysis of the reaction, following the fluorescence of an active site tryptophan, is consistent with a minimal three-step model involving substrate binding, chemistry, and product release. Chemical quench experiments show burst kinetics, indicating that product release is at least partially rate limiting. Global fitting of all of the kinetic results by simulation is best accommodated by a four-step mechanism. In the final kinetic model, the enzyme binds substrate and isomerizes to an alternate fluorescent form, chemistry occurs, and is followed by the ordered release of two products, with the release of the first product as the rate-limiting step. Bromide ion is a competitive inhibitor of the reaction indicating that it binds to the free enzyme rather than to the enzyme with one product still bound. This observation suggests that malonate semialdehyde is the first product released by the enzyme (rate limiting), followed by halide. A comparison of the unliganded cis-CaaD crystal structure with that of an inactivated cis-CaaD where the prolyl nitrogen of Pro-1 is covalently attached to (R)-2-hydroxypropanoate provides a possible explanation for the isomerization step. The structure of the covalently modified enzyme shows that a 7-residue loop comprised of residues 32-38 is closed down on the active site cavity where the backbone amides of two residues (Phe-37 and Leu-38) interact with the carboxylate group of the adduct. In the unliganded form, the same loop points away from the active site cavity. Similarly, substrate binding may cause this loop to close down on the active site and sequester the reaction from the external environment. PMID:19856961

Line narrowing spectroscopic studies of DNA-carcinogen adducts and DNA-dye complexes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Suh, Myungkoo

1995-12-06

Laser-induced fluorescence line narrowing and non-line narrowing spectroscopic methods were applied to conformational studies of stable DNA adducts of the 7β, 8α-dihydoxy-9α, l0α-epoxy-7,8,9, 10-tetrahydrobenzo[α]pyrene (anti-BPDE). Stereochemically distinct (+)-trans-, (-)-trans-, (+)-cis- and (-)-cis adducts of anti-BPDE bound to exocyclic amino group of the central guanine in an 11-mer oligonucleotide, exist in a mixture of conformations in frozen aqueous buffer matrices. The (+)-trans adduct adopts primarily an external conformation with a smaller fraction ( ~25 %) exists in a partially base-stacked conformation. Both cis adducts were found to be intercalated with significant π-π stacking interactions between the pyrenyl residues and the bases.more » Conformations of the trans-adduct of (+)-anti -BPDE in 11-mer oligonucleotides were studied as a function of flanking bases. In single stranded form the adduct at G 2 or G 3 (5 ft-flanking, base guanine) adopts a conformation with strong, interaction with the bases. In contrast, the adduct with a 5ft-flanking, thymine exists in a primarily helixexternal conformation. Similar differences were observed in the double stranded oligonucleotides. The nature of the 3ft-flanking base has little influence on the conformational equilibrium of the (+)-trans-anti BPDE-dG adduct. The formation and repair of BPDE-N 2-dG in DNA isolated from the skin of mice treated topically with benzo[α]pyrene (BP) was studied. Low-temperature fluorescence spectroscopy of the intact DNA identified the major adduct as (+)-trans-anti-BPDE-N-dG, and the minor adduct fraction consisted mainly of (+)-cis-anti-BPDE-N 2-dG.« less

Cis-acting elements in the promoter region of the human aldolase C gene.

PubMed

Buono, P; de Conciliis, L; Olivetta, E; Izzo, P; Salvatore, F

1993-08-16

We investigated the cis-acting sequences involved in the expression of the human aldolase C gene by transient transfections into human neuroblastoma cells (SKNBE). We demonstrate that 420 bp of the 5'-flanking DNA direct at high efficiency the transcription of the CAT reporter gene. A deletion between -420 bp and -164 bp causes a 60% decrease of CAT activity. Gel shift and DNase I footprinting analyses revealed four protected elements: A, B, C and D. Competition analyses indicate that Sp1 or factors sharing a similar sequence specificity bind to elements A and B, but not to elements C and D. Sequence analysis shows a half palindromic ERE motif (GGTCA), in elements B and D. Region D binds a transactivating factor which appears also essential to stabilize the initiation complex.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rycyna, R.E.; Alderfer, J.L.

Uridylyl(3'-5')uridine (UpU) is subjected to aqueous acetone photosensitized radiation with sunlamps. These irradiation conditions form only cyclobutane-type photodimers. Purification of a specific configurational photodimer is accomplished by using C-18 reverse-phase high-performance liquid chromatography. Multinuclear NMR analysis is used to analyze photoproduct formation and to determine conformational features of these photodimers. Four photodimers are identified, with the cis-syn isomer predominant. The cis-syn and trans-syn photodimers of UpU exhibit markedly different furanose and exocyclic bond conformations. A comparison of the properties of the cis-syn dimers of UpU with those of dTpdT reveal many similar conformational features but also some that are different.

Identification of absolute geometries of cis and trans molecular isomers by Coulomb Explosion Imaging.

PubMed

Ablikim, Utuq; Bomme, Cédric; Xiong, Hui; Savelyev, Evgeny; Obaid, Razib; Kaderiya, Balram; Augustin, Sven; Schnorr, Kirsten; Dumitriu, Ileana; Osipov, Timur; Bilodeau, René; Kilcoyne, David; Kumarappan, Vinod; Rudenko, Artem; Berrah, Nora; Rolles, Daniel

2016-12-02

An experimental route to identify and separate geometric isomers by means of coincident Coulomb explosion imaging is presented, allowing isomer-resolved photoionization studies on isomerically mixed samples. We demonstrate the technique on cis/trans 1,2-dibromoethene (C 2 H 2 Br 2 ). The momentum correlation between the bromine ions in a three-body fragmentation process induced by bromine 3d inner-shell photoionization is used to identify the cis and trans structures of the isomers. The experimentally determined momentum correlations and the isomer-resolved fragment-ion kinetic energies are matched closely by a classical Coulomb explosion model.

Identification of absolute geometries of cis and trans molecular isomers by Coulomb Explosion Imaging

PubMed Central

Ablikim, Utuq; Bomme, Cédric; Xiong, Hui; Savelyev, Evgeny; Obaid, Razib; Kaderiya, Balram; Augustin, Sven; Schnorr, Kirsten; Dumitriu, Ileana; Osipov, Timur; Bilodeau, René; Kilcoyne, David; Kumarappan, Vinod; Rudenko, Artem; Berrah, Nora; Rolles, Daniel

2016-01-01

An experimental route to identify and separate geometric isomers by means of coincident Coulomb explosion imaging is presented, allowing isomer-resolved photoionization studies on isomerically mixed samples. We demonstrate the technique on cis/trans 1,2-dibromoethene (C2H2Br2). The momentum correlation between the bromine ions in a three-body fragmentation process induced by bromine 3d inner-shell photoionization is used to identify the cis and trans structures of the isomers. The experimentally determined momentum correlations and the isomer-resolved fragment-ion kinetic energies are matched closely by a classical Coulomb explosion model. PMID:27910943

Identification of absolute geometries of cis and trans molecular isomers by Coulomb Explosion Imaging

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ablikim, Utuq; Bomme, Cédric; Xiong, Hui

An experimental route to identify and separate geometric isomers by means of coincident Coulomb explosion imaging is presented, allowing isomer-resolved photoionization studies on isomerically mixed samples. We demonstrate the technique on cis/trans 1,2-dibromoethene (C 2H 2Br 2). The momentum correlation between the bromine ions in a three-body fragmentation process induced by bromine 3d inner-shell photoionization is used to identify the cis and trans structures of the isomers. Lastly, the experimentally determined momentum correlations and the isomer-resolved fragment-ion kinetic energies are matched closely by a classical Coulomb explosion model.

Identification of absolute geometries of cis and trans molecular isomers by Coulomb Explosion Imaging

DOE PAGES

Ablikim, Utuq; Bomme, Cédric; Xiong, Hui; ...

2016-12-02

An experimental route to identify and separate geometric isomers by means of coincident Coulomb explosion imaging is presented, allowing isomer-resolved photoionization studies on isomerically mixed samples. We demonstrate the technique on cis/trans 1,2-dibromoethene (C 2H 2Br 2). The momentum correlation between the bromine ions in a three-body fragmentation process induced by bromine 3d inner-shell photoionization is used to identify the cis and trans structures of the isomers. Lastly, the experimentally determined momentum correlations and the isomer-resolved fragment-ion kinetic energies are matched closely by a classical Coulomb explosion model.

Using Saccharomyces cerevisiae to test the mutagenicity of household compounds: an open ended hypothesis-driven teaching lab.

PubMed

Marshall, Pamela A

2007-01-01

In our Fundamentals of Genetics lab, students perform a wide variety of labs to reinforce and extend the topics covered in lecture. I developed an active-learning lab to augment the lecture topic of mutagenesis. In this lab exercise, students determine if a compound they bring from home is a mutagen. Students are required to read extensive background material, perform research to find a potential mutagen to test, develop a hypothesis, and bring to the lab their own suspected mutagen. This lab uses a specially developed strain of Saccharomyces cerevisiae, D7, to determine if a compound is a mutagen. Mutagenesis of the D7 genome can lead to a scorable alteration in the phenotypes of this strain. Students outline and carry out a protocol for treatment of the yeast tester strain, utilizing the concept of dose/response and positive and negative controls. Students report on their results using a PowerPoint presentation to simulate giving a scientific presentation. The students' self-assessment of their knowledge indicated that, in all cases, the students felt that they knew more about the assay, mutagenesis, and the relationship between genotype and phenotype (P < 0.05) after completing the exercise.

Lab-on-a-Chip Device for Rapid Measurement of Vitamin D Levels.

PubMed

Peter, Harald; Bistolas, Nikitas; Schumacher, Soeren; Laurisch, Cecilia; Guest, Paul C; Höller, Ulrich; Bier, Frank F

2018-01-01

Lab-on-a-chip assays allow rapid analysis of one or more molecular analytes on an automated user-friendly platform. Here we describe a fully automated assay and readout for measurement of vitamin D levels in less than 15 min using the Fraunhofer in vitro diagnostics platform. Vitamin D (25-hydroxyvitamin D 3 [25(OH)D 3 ]) dilution series in buffer were successfully tested down to 2 ng/mL. This could be applied in the future as an inexpensive point-of-care analysis for patients suffering from a variety of conditions marked by vitamin D deficiencies.

Favorable genomic environments for cis-regulatory evolution: A novel theoretical framework.

PubMed

Maeso, Ignacio; Tena, Juan J

2016-09-01

Cis-regulatory changes are arguably the primary evolutionary source of animal morphological diversity. With the recent explosion of genome-wide comparisons of the cis-regulatory content in different animal species is now possible to infer general principles underlying enhancer evolution. However, these studies have also revealed numerous discrepancies and paradoxes, suggesting that the mechanistic causes and modes of cis-regulatory evolution are still not well understood and are probably much more complex than generally appreciated. Here, we argue that the mutational mechanisms and genomic regions generating new regulatory activities must comply with the constraints imposed by the molecular properties of cis-regulatory elements (CREs) and the organizational features of long-range chromatin interactions. Accordingly, we propose a new integrative evolutionary framework for cis-regulatory evolution based on two major premises for the origin of novel enhancer activity: (i) an accessible chromatin environment and (ii) compatibility with the 3D structure and interactions of pre-existing CREs. Mechanisms and DNA sequences not fulfilling these premises, will be less likely to have a measurable impact on gene expression and as such, will have a minor contribution to the evolution of gene regulation. Finally, we discuss current comparative cis-regulatory data under the light of this new evolutionary model, and propose that the two most prominent mechanisms for the evolution of cis-regulatory changes are the overprinting of ancestral CREs and the exaptation of transposable elements. Copyright © 2015 Elsevier Ltd. All rights reserved.

Compact 3D Camera for Shake-the-Box Particle Tracking

NASA Astrophysics Data System (ADS)

Hesseling, Christina; Michaelis, Dirk; Schneiders, Jan

2017-11-01

Time-resolved 3D-particle tracking usually requires the time-consuming optical setup and calibration of 3 to 4 cameras. Here, a compact four-camera housing has been developed. The performance of the system using Shake-the-Box processing (Schanz et al. 2016) is characterized. It is shown that the stereo-base is large enough for sensible 3D velocity measurements. Results from successful experiments in water flows using LED illumination are presented. For large-scale wind tunnel measurements, an even more compact version of the system is mounted on a robotic arm. Once calibrated for a specific measurement volume, the necessity for recalibration is eliminated even when the system moves around. Co-axial illumination is provided through an optical fiber in the middle of the housing, illuminating the full measurement volume from one viewing direction. Helium-filled soap bubbles are used to ensure sufficient particle image intensity. This way, the measurement probe can be moved around complex 3D-objects. By automatic scanning and stitching of recorded particle tracks, the detailed time-averaged flow field of a full volume of cubic meters in size is recorded and processed. Results from an experiment at TU-Delft of the flow field around a cyclist are shown.

Still going strong: Leeuwenhoek at eighty.

PubMed

Anderson, Douglas

2014-07-01

At age 80, Antony van Leeuwenhoek was a world-famous scientist who came from a prosperous Delft family with a heritage of public service. He continued that tradition by serving in paid municipal offices. Self-taught, he began his scientific career in his 40s, when he began making hundreds of tiny single-lens microscopes. Pioneering the use of now-common microscopic techniques, he was the first human to see microbes and microscopic structures in animals, plants, and minerals. Over 50 years, he wrote only letters, more than 300 of them, and published half of them himself. More than a hundred were published in translation in the Royal Society's Philosophical Transactions. Today, Leeuwenhoek is considered in the lesser rank of scientists and is not well known outside of his homeland. Recent archival research in Delft has contributed new information about his life that helps to contextualize his science, but much remains to be learned.

MatLab Script and Functional Programming

NASA Technical Reports Server (NTRS)

Shaykhian, Gholam Ali

2007-01-01

MatLab Script and Functional Programming: MatLab is one of the most widely used very high level programming languages for scientific and engineering computations. It is very user-friendly and needs practically no formal programming knowledge. Presented here are MatLab programming aspects and not just the MatLab commands for scientists and engineers who do not have formal programming training and also have no significant time to spare for learning programming to solve their real world problems. Specifically provided are programs for visualization. The MatLab seminar covers the functional and script programming aspect of MatLab language. Specific expectations are: a) Recognize MatLab commands, script and function. b) Create, and run a MatLab function. c) Read, recognize, and describe MatLab syntax. d) Recognize decisions, loops and matrix operators. e) Evaluate scope among multiple files, and multiple functions within a file. f) Declare, define and use scalar variables, vectors and matrices.

Flexibility of "polyunsaturated fatty acid chains" and peptide backbones: A comparative ab initio study.

PubMed

Law, Jacqueline M S; Setiadi, David H; Chass, Gregory A; Csizmadia, Imre G; Viskolcz, Béla

2005-01-27

The conformational properties of omega-3 type of polyunsaturated fatty acid (PUFA) chains and their fragments were studied using Hartree-Fock (RHF/3-21G) and DFT (B3LYP/6-31G(d)) methods. Comparisons between a unit (U) fragment of the PUFA chain and a mono N-Ac-glycine-NHMe residue show that both structures have the same sequence of sp2-sp3-sp2 atoms. The flexibility of PUFA originates in the internal rotation about the above pairs of sigma bonds. Therefore, potential energy surfaces (PESs) were generated by a scan around the terminal dihedral angles (phi t1 and phi t2) as well as the phi 1 and psi 1 dihedrals of both 1U congeners (Me-CHCH-CH2-CHCHMe and MeCONH-CH2-CONHMe) at the RHF/3-21G level of theory. An interesting similarity was found in the flexibility between the cis allylic structure and the trans peptide models. A flat landscape can be seen in the cis 1U (hepta-2,5-diene) surface, implying that several conformations are expected to be found in this (PES). An exhaustive search carried out on the 1U and 2U models revealed that straight chain structures such as trans and cis beta (phi 1 approximately psi 1 approximately 120 degrees; phi 2 approximately psi 2 approximately -120 degrees) or trans and cis extended (phi 1 approximately psi 1 approximately phi 2 approximately psi 2 approximately 120 degrees) can be formed at the lowest energy of both isomers. However, forming helical structures, such as trans helix (phi 1 approximately -120 degrees, psi 1 approximately 12 degrees; phi 2 approximately -120 degrees, psi 2 approximately 12 degrees) or cis helix (phi 1 approximately -130 degrees, psi 1 approximately 90 degrees; phi 2 approximately -145 degrees, psi 2 approximately 90 degrees) will require more energy. These six conformations, found in 2U, were selected to construct longer chains such as 3U, 4U, 5U, and 6U to obtain the thermochemistry of secondary structures. The variation in the extension or compression of the chain length turned out to be a factor of 2 between the helical and nonhelical structures. The inside diameter of the "tube" of cis helix turned out to be 3.5 A after discounting the internal H atoms. Thermodynamic functions were computed at the B3LYP/6-311+G(2d,p)//B3LYP/6-31G(d). The cis-trans isomerization energy of 1.7 +/- 0.2 kcal mol(-1) unit(-1) for all structure pairs indicates that the conformer selection was consistent. A folding energy of 0.5 +/- 0.1 kcal mol(-1) unit(-1) has been extracted from the energy comparison of the helices and most extended nonhelical structures. The entropy change associated with the folding (Delta S(folding)) is decreases faster with the degree of polymerization (n) for the cis than for the trans isomer. As a consequence, the linear relationships between (Delta G(folding)) and n for the cis and trans isomer crossed at about n = 3. This suggested that the naturally occurring cis isomer less ready to fold than the trans isomer since a greater degree of organization is exhibited by the cis isomer during the folding process. The result of this work leads to the question within the group additivity rule: could the method applied in our study of the folding of polyallylic hydrocarbons be useful in investigating the thermochemistry of protein folding?

Does littoral sand bypass the head of Mugu Submarine Canyon? - a modeling study

USGS Publications Warehouse

Xu, Jingping; Elias, Edwin; Kinsman, Nicole; Wang, Ping; Rosati, Julie D.; Roberts, Tiffany M.

2011-01-01

A newly developed sand-tracer code for the process-based model Delft3D (Deltares, The Netherlands) was used to simulate the littoral transport near the head of the Mugu Submarine Canyon in California, USA. For westerly swells, which account for more than 90% of the wave conditions in the region, the sand tracers in the downcoast littoral drift were unable to bypass the canyon head. A flow convergence near the upcoast rim of the canyon intercepts the tracers and moves them either offshore onto the shelf just west of the canyon rim (low wave height conditions) or into the canyon head (storm wave conditions). This finding supports the notion that Mugu Canyon is the true terminus of the Santa Barbara Littoral Cell.

Computer Modeling of Complete IC Fabrication Process.

DTIC Science & Technology

1987-05-28

James Shipley National Semi.Peter N. Manos AMD Ritu Shrivastava Cypress Semi. Corp.Deborah D. Maracas Motorola, Inc. Paramjit Singh Rockwell Intl.Sidney...Carl F Daegs Sandia Hishan Z Massoud Duke* UnIVersdy Anant Dix* Silicon Systems David Matthews Hughes Rese~arch Lab DIolidi DoIIos Spery Tmioomly K...Jaczynski AT&T Bell Labs Jack C. Carlson Motorola Sanjay Jain AT&T Bell Labs Andrew Chan Fairchild Weston Systems Werner Juengling AT&T Bell Labs

Academic Pipeline and Futures Lab

DTIC Science & Technology

2016-02-01

AFRL-RY-WP-TR-2015-0186 ACADEMIC PIPELINE AND FUTURES LAB Brian D. Rigling Wright State University FEBRUARY 2016...DD-MM-YY) 2. REPORT TYPE 3. DATES COVERED (From - To) February 2016 Final 12 June 2009 – 30 September 2015 4. TITLE AND SUBTITLE ACADEMIC ...6 3 WSU ACADEMIC PIPELINE AND LAYERED SENSING FUTURES LAB (prepared by K

Ethnic and Environmental Influences on Vitamin D Requirement in Military Personnel

DTIC Science & Technology

2006-10-01

25(OH)D, Ca2+ and PTH at baseline. We used a portable colorimeter that utilizes the CIE L*a*b* color system to measure constitutive skin color of...at baseline. We used a portable colorimeter that utilizes the CIE L*a*b* color system to measure constitutive skin tone of the upper inner arm. The

GridLAB-D: An Agent-Based Simulation Framework for Smart Grids

DOE PAGES

Chassin, David P.; Fuller, Jason C.; Djilali, Ned

2014-01-01

Simulation of smart grid technologies requires a fundamentally new approach to integrated modeling of power systems, energy markets, building technologies, and the plethora of other resources and assets that are becoming part of modern electricity production, delivery, and consumption systems. As a result, the US Department of Energy’s Office of Electricity commissioned the development of a new type of power system simulation tool called GridLAB-D that uses an agent-based approach to simulating smart grids. This paper presents the numerical methods and approach to time-series simulation used by GridLAB-D and reviews applications in power system studies, market design, building control systemmore » design, and integration of wind power in a smart grid.« less

GridLAB-D: An Agent-Based Simulation Framework for Smart Grids

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chassin, David P.; Fuller, Jason C.; Djilali, Ned

2014-06-23

Simulation of smart grid technologies requires a fundamentally new approach to integrated modeling of power systems, energy markets, building technologies, and the plethora of other resources and assets that are becoming part of modern electricity production, delivery, and consumption systems. As a result, the US Department of Energy’s Office of Electricity commissioned the development of a new type of power system simulation tool called GridLAB-D that uses an agent-based approach to simulating smart grids. This paper presents the numerical methods and approach to time-series simulation used by GridLAB-D and reviews applications in power system studies, market design, building control systemmore » design, and integration of wind power in a smart grid.« less

Bacteriorhodopsin Material and Film Fabrication Issues for Holographic Applications

NASA Technical Reports Server (NTRS)

Downie, John D.; Timucin, Dogan A.; Smithey, Daniel T.; Crew, Marshall; Rayfield, George W.; Lan, Sonie (Technical Monitor)

1998-01-01

We discuss issues associated with bacteriorhodopsin (BR) materials and films that affect optical performance in holographic applications. For the D85N variant, some critical parameters include degree of hydration and recording wavelength. The quantum efficiency of the molecular state transition is observed to be apparently dependent on the illumination wavelength. We explain this effect by modeling the photo-activity of the D85N variant as two competing photocycles between the 9-cis and 13-cis retinal configurations. We are able to determine the pure excited P-state absorbance spectrum from the ground state spectrum and mixed population spectra obtained by bleaching to steady-state conditions.

Nearshore Circulation and Storm Surge Along the Mackenzie Delta Coast

NASA Astrophysics Data System (ADS)

Perrie, W.; Mulligan, R. P.; Solomon, S. M.; Hoque, A.; Zhang, L.

2008-12-01

The Mackenzie Delta is a 150 km long section of coastline characterized by muddy sediments where the Mackenzie River outflow, dispersed over 20 distributary channels, discharges into the southern Beaufort Sea. The marine environment in this region is an important and integral part of the lives of Canadian Northerners. The area is also undergoing hydrocarbon exploration with potential development within the next decade. Changes to Arctic climate, such as increasing ice-free western Arctic Ocean and intensifying storm activity, may endanger the coastal settlements and marine environment in the Mackenzie Delta region. The low gradient of the delta and the adjacent inner shelf makes it very susceptible to flooding during storms. Field observations in the nearshore zone collected in August of 2007 and 2008 indicate strong gradients in temperature and salinity in shallow water of 2-6 m. The fluctuations are associated with the movements of warm and fresh river plumes and wind-driven upwelling of cold and saline water below the thermocline. The observations are in agreement with 3D model simulations of the nearshore delta region using Delft3D, which includes wind, tidal, storm surge, buoyancy and river forcing. The results validate the model and indicate that it can be used to hindcast the nearshore oceanographic conditions during severe Arctic storms. As a case study we present preliminary model results for an Arctic storm from late 1999 that caused extensive vegetation die-off in the outer delta. This cyclone was a mesoscale Arctic storm that developed over the NE Pacific and western Bering Sea, intensified explosively in the Gulf of Alaska and developed into a meteorological bomb. The storm made landfall at Cape Newenham, Alaska, crossed the Rocky Mountains to the Yukon and Northwest Territories and re-intensified over a zone of high sea surface temperature gradients in the southern Beaufort Sea. Using the Canadian Mesoscale Compressible Community (MC2) atmospheric model, simulations of the storm pattern, track and intensity are in very good agreement with the NCEP re-analysis. This is model coupled to the Princeton Ocean Model (POM) and Hibler Ice Model, which are used to provide basin-scale driver fields and define the boundary conditions of the nearshore Delft3D model for the Mackenzie Delta region. Coastal damage was predominately caused by storm surge, and the high salinity flood waters that flowed over the surface of the outer delta.

Biotransformation of Various Substituted Aromatic Compounds to Chiral Dihydrodihydroxy Derivatives

PubMed Central

Raschke, Henning; Meier, Michael; Burken, Joel G.; Hany, Roland; Müller, Markus D.; Van Der Meer, Jan Roelof; Kohler, Hans-Peter E.

2001-01-01

The biotransformation of four different classes of aromatic compounds by the Escherichia coli strain DH5α(pTCB 144), which contained the chlorobenzene dioxygenase (CDO) from Pseudomonas sp. strain P51, was examined. CDO oxidized biphenyl as well as monochlorobiphenyls to the corresponding cis-2,3-dihydro-2,3-dihydroxy derivatives, whereby oxidation occurred on the unsubstituted ring. No higher substituted biphenyls were oxidized. The absolute configurations of several monosubstituted cis-benzene dihydrodiols formed by CDO were determined. All had an S configuration at the carbon atom in meta position to the substituent on the benzene nucleus. With one exception, the enantiomeric excess of several 1,4-disubstituted cis-benzene dihydrodiols formed by CDO was higher than that of the products formed by two toluene dioxygenases. Naphthalene was oxidized to enantiomerically pure (+)-cis-(1R,2S)-dihydroxy-1,2-dihydronaphthalene. All absolute configurations were identical to those of the products formed by toluene dioxygenases of Pseudomonas putida UV4 and P. putida F39/D. The formation rate of (+)-cis-(1R,2S)-dihydroxy-1,2-dihydronaphthalene was significantly higher (about 45 to 200%) than those of several monosubstituted cis-benzene dihydrodiols and more than four times higher than the formation rate of cis-benzene dihydrodiol. A new gas chromatographic method was developed to determine the enantiomeric excess of the oxidation products. PMID:11472901

EAG response and behavioral orientation of Dastarcus helophoroides (Fairmaire) (Coleoptera: Bothrideridae) to synthetic host-associated volatiles

PubMed Central

Schütz, Stefan

2017-01-01

Dastarcus helophoroides Fairmaire (Coleoptera: Bothrideridae) is an effective predatory beetle of larvae and pupae of several cerambycid beetles including Monochamus alternatus and Anoplophora glabripennis. Electroantennography (EAG) and a dynamic two-choice olfactometer were respectively used to measure the antennal and behavioral responses of both sexes to selected volatile compounds. Female and male D. helophoroides exhibited similar EAG and behavioral responses. Significant dose-dependent EAG responses in both sexes were elicited by nonanal, octanal, cis-3-hexenol, 3-carene, (R)-(+)-α-pinene, (S)-(-)-α-pinene, (R)-(+)-limonene and (S)-(-)-limonene. Female and male beetles were repelled at high concentration by cis-3-hexenol and (S)-(-)-limonene, respectively. Both sexes of D. helophoroides were significantly attracted to nonanal, cis-3-hexenol, 3-carene and (R)-(+)-limonene even at low concentrations. These compounds might be used either individually or in mixtures for developing biological control methods to attract this predatory beetle into forest stands threatened by cerambycid beetles. PMID:29267391

Formation and characterization of a multicomponent equilibrium system derived from cis- and trans-1-aminomethylcyclohexane-1,2-diol.

PubMed

Hetényi, Anasztázia; Szakonyi, Zsolt; Klika, Karel D; Pihlaja, Kalevi; Fülöp, Ferenc

2003-03-21

Both cis and trans isomers of amino diols 3-6 were prepared stereoselectively. In the reactions between 3-6 and phenyl isothiocyanate, the ring closure proceeded regioselectively and resulted only in spiro derivatives of 2-phenyliminooxazolidines 9, 10, 13, and 14. The reaction of cis- (or trans-)1-aminomethylcyclohexane-1,2-diol 4 (or 6) with 1 equiv of an aromatic aldehyde 15a-g in EtOH at room temperature resulted in a complex, multicomponent equilibrium mixture of 16a-g and 18a-g (or 17a-g and 19a-g), in each case consisting of a five-component, ring-chain tautomeric system 16A-E (or 17A-E), involving the Schiff base, two epimeric spirooxazolidines, two epimeric condensed 1,3-oxazines, and some of the four tricyclic compounds 18A-D (or 19A-D). The five-component, ring-chain equilibria were found to be adequately described by the Hammett-Brown linear free energy equation.

cis-Stilbene and (1 alpha,2 beta,3 alpha)-(2-ethenyl-3-methoxycyclopropyl)benzene as mechanistic probes in the Mn(III)(salen)-catalyzed epoxidation: influence of the oxygen source and the counterion on the diastereoselectivity of the competitive concerted and radical-type oxygen transfer.

PubMed

Adam, Waldemar; Roschmann, Konrad J; Saha-Möller, Chantu R; Seebach, Dieter

2002-05-08

cis-Stilbene (1) has been epoxidized by a set of diverse oxygen donors [OxD], catalyzed by the Mn(III)(salen)X complexes 3 (X = Cl, PF(6)), to afford a mixture of cis- and trans-epoxides 2. The cis/trans ratios range from 29:71 (extensive isomerization) to 92:8, which depends both on the oxygen source [OxD] and on the counterion X of the catalyst. When (1 alpha,2 beta,3 alpha)-(2-ethenyl-3-methoxycyclopropyl)-benzene (4) is used as substrate, a mechanistic probe which differentiates between radical and cationic intermediates, no cationic ring-opening products are found in this epoxidation reaction; thus, isomerized epoxide product arises from intermediary radicals. The dependence of the diastereoselectivity on the oxygen source is rationalized in terms of a bifurcation step in the catalytic cycle, in which concerted Lewis-acid-activated oxygen transfer competes with stepwise epoxidation by the established Mn(V)(oxo) species. The experimental counterion effect is attributed to the computationally assessed ligand-dependent reaction profiles and stereoselectivities of the singlet, triplet, and quintet spin states available to the manganese species.

Recurrent cis-SAGe chimeric RNA, D2HGDH-GAL3ST2, in prostate cancer.

PubMed

Qin, Fujun; Song, Zhenguo; Chang, Maxwell; Song, Yansu; Frierson, Henry; Li, Hui

2016-09-28

Neighboring genes transcribing in the same direction can form chimeric RNAs via cis-splicing (cis-SAGe). Previously, we reported 16 novel cis-SAGe chimeras in prostate cancer cell lines, and performed in silico validation on 14 pairs of normal and tumor samples from Chinese patients. However, whether these fusions exist in different populations, as well as their clinical implications, remains unclear. To investigate, we developed a bioinformatics pipeline using modified Spliced Transcripts Alignment to a Reference (STAR) to quantify these fusion RNAs simultaneously in silico. From RNA-Seq data of 100 paired normal and prostate cancer samples from TCGA, we find that most fusions are not specific to cancer. However, D2HGDH-GAL3ST2 is more frequently seen in cancer samples, and seems to be enriched in the African American group. Further validation with our own collection as well as from commercial sources did not detect this fusion RNA in 29 normal prostate samples, but in 19 of 93 prostate cancer samples. It is more frequently detected in late stage cancer, suggesting a role in cancer progression. Consistently, silencing this fusion resulted in dramatic reduction of cell proliferation rate and cell motility. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Scaling Flight Tests of Unmanned Air Vehicles

DTIC Science & Technology

2006-09-01

Figure Page Figure 1. Scaled Vehicle used to test Roll over propensity of automobiles . .................. 22 Figure 2. “Davicar...propensity of automobiles . In other research carried out at the University of Delft, Netherlands, the project DAVINCI was developed for

Synthesis, spectroscopic and TD-DFT quantum mechanical study of azo-azomethine dyes. A laser induced trans-cis-trans photoisomerization cycle

NASA Astrophysics Data System (ADS)

Georgiev, Anton; Kostadinov, Anton; Ivanov, Deyan; Dimov, Deyan; Stoyanov, Simeon; Nedelchev, Lian; Nazarova, Dimana; Yancheva, Denitsa

2018-03-01

This paper describes the synthesis, spectroscopic characterization and quantum mechanical calculations of three azo-azomethine dyes. The dyes were synthesized via condensation reaction between 4-(dimethylamino)benzaldehyde and three different 4-aminobenzene azo dyes. Quantum chemical calculations on the optimized molecular geometry and electron densities of the trans (E) and cis (Z) isomers and their vibrational frequencies have been computed by using DFT/B3LYP density-functional theory with 6-311 ++G(d,p) basis set in vacuo. The thermodynamic parameters such as total electronic energy E (RB3LYP), enthalpy H298 (sum of electronic and thermal enthalpies), free Gibbs energy G298 (sum of electronic and thermal free Gibbs energies) and dipole moment μ were computed for trans (E) and cis (Z) isomers in order to estimate the ΔEtrans → cis, Δμtrans → cis,ΔHtrans → cis, ΔGtrans → cis and ΔStrans → cis values. After molecular geometry optimization the electronic spectra have been obtained by TD-DFT calculations at same basis set and correlated with the spectra of vapour deposited nanosized films of the dyes. The NBO analysis was performed in order to understand the intramolecular charge transfer and energy of resonance stabilization. Solvatochromism was investigated by UV-VIS spectroscopy in five different organic solvents with increasing polarity. The dynamic photoisomerization experiments have been performed in DMF by pump lasers λ = 355 nm (mostly E → Z) and λ = 491 nm (mostly Z → E) in spectral region 300 nm - 800 nm at equal concentrations and times of illumination in order to investigate the photodynamical trans-cis-trans properties of the sbnd CHdbnd Nsbnd and sbnd Ndbnd Nsbnd chromophore groups of the dyes.

Herpesvirus papio contains a plasmid origin of replication that acts in cis interspecies with an Epstein-Barr virus trans-acting function.

PubMed Central

Pesano, R L; Pagano, J S

1986-01-01

Herpesvirus papio (HVP) and Epstein-Barr virus (EBV) are closely related biologically and biochemically; lymphoblastoid cells infected with either virus contain episomal viral DNA. The putative origin of replication for EBV plasmids (oriP) has been assigned to a 1,790-base-pair fragment (cis) in the short unique region of the genome which requires a viral function supplied in trans from elsewhere in the genome (J. Yates, N. Warren, D. Reisman, and B. Sugden, Proc. Natl. Acad. Sci. USA 81:3806-3810, 1984). We report here the identification of the putative origin of replication (cis) in HVP; we assigned it to the HVP EcoRI K fragment. The results indicate that the HVP replication process requires both a cis and a trans-acting function, analogous to that found in EBV. Images PMID:3023667

Pigeon peas as a supplement for lactating dairy cows fed corn silage-based diets.

PubMed

Corriher, V A; Hill, G M; Bernard, J K; Jenkins, T C; West, J W; Mullinix, B G

2010-11-01

Holstein rumen-cannulated cows [n=7; initial body weight (BW) 640.56±71.43 kg] were fed a corn silage basal diet with 1 of 3 concentrates (C=control; P10=10% pigeon peas; P20=20% pigeon peas). Cows were randomly assigned to treatments in a replicated 3×3 Latin square and individually fed using Calan gates. Each experimental period was 21 d with 7 d for adaption and 14 d for sample collection. Ruminal fluid samples were taken the last day of each experimental period and analyzed for pH, ammonia, long-chain fatty acids, and volatile fatty acids (VFA). Consecutive a.m. and p.m. milk samples were taken during the last 2 wk of the 21-d period and analyzed for fat, protein, long-chain fatty acids, and somatic cell count. Dry matter intake (kg/d) was reduced during the second period and was greater for P10 diets. Milk protein was greater for cows fed P20 compared with P10. Energy-corrected milk was greater for cows fed the control diet compared with P10. Treatment had no effect on milk yield. Ruminal fluid pH decreased over sampling times; however, pH remained at or above 5.5. Diets did not affect ruminal fluid pH; however, pH was different for sampling periods. Ruminal ammonia decreased until 8h postfeeding at which time it peaked consistent with changes in ammonia concentrations that usually peak 3 to 5h postfeeding on diets high in plant proteins. Dietary treatments altered ruminal fluid VFA with reduced concentrations of acetate and greater concentrations of propionate for control diet, resulting in reduced acetate:propionate ratio. Isobutyrate exhibited an hour by treatment interaction, in which isobutyrate decreased until 8h postfeeding and then tended to be greater for P10 than for other treatments. Animals fed the P10 diet had greater concentrations of ruminal isovalerate. Ruminal cis-9,trans-11 and trans-10,cis-12 conjugated linoleic acid (CLA) isomers were not affected by dietary treatments. The P10 diet had greatest ruminal synthesis of cis-9,trans-11, but control cows had greatest ruminal synthesis of trans-10,cis-12. Milk CLA isomers were similar among treatments. Trends were observed for greater cis-9,trans-11 and trans-10,cis-12 for the P10 diet. Pigeon peas may be used as a protein supplement in dairy diets without affecting milk production, dry matter intake, or ruminal environment when they replace corn and soybean meal. Copyright © 2010 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Variable dual carbon-bromine stable isotope fractionation during enzyme-catalyzed reductive dehalogenation of brominated ethenes.

PubMed

Woods, Angela; Kuntze, Kevin; Gelman, Faina; Halicz, Ludwik; Nijenhuis, Ivonne

2018-01-01

The potential of compound-specific stable isotope analysis (CSIA) to characterize biotransformation of brominated organic compounds (BOCs) was assessed and compared to chlorinated analogues. Sulfurospirillum multivorans and Desulfitobacterium hafniense PCE-S catalyzed the dehalogenation of tribromoethene (TBE) to either vinyl bromide (VB) or ethene, respectively. Significantly lower isotope fractionation was observed for TBE dehalogenation by S. multivorans (ε C  = -1.3 ± 0.2‰) compared to D. hafniense (ε C  = -7.7 ± 1.5‰). However, higher fractionation was observed for dibromoethene (DBE) dehalogenation by S. multivorans (ε C  = -16.8 ± 1.8‰ and -21.2 ± 1.6‰ for trans- and cis-1,2- (DBE) respectively), compared to D. hafniense PCE-S (ε C  = -9.5 ± 1.2‰ and -14.5 ± 0.7‰ for trans-1,2-DBE and cis-1,2-DBE, respectively). Significant, but similar, bromine fractionation was observed for for S. multivorans (ε Br  = -0.53 ± 0.15‰, -1.03 ± 0.26‰, and -1.18 ± 0.13‰ for trans-1,2-DBE, cis-1,2-DBE and TBE, respectively) and D. hafniense PCE-S (ε Br  = -0.97 ± 0.28‰, -1.16 ± 0.36‰, and -1.34 ± 0.32‰ for cis-1,2-DBE, TBE and trans-1,2-DBE, respectively). Variable CBr dual-element slopes were estimated at Λ (ε C /ε Br ) = 1.03 ± 0.2, 17.9 ± 5.8, and 29.9 ± 11.0 for S. multivorans debrominating TBE, cis-1,2-DBE and trans-1,2-DBE, respectively, and at 7.14 ± 1.6, 8.27 ± 3.7, and 8.92 ± 2.4 for D. hafniense PCE-S debrominating trans-1,2-DBE, TBE and cis-1,2-DBE, respectively. A high variability in isotope fractionation, which was substrate property related, was observed for S. multivorans but not D. hafniense, similar as observed for chlorinated ethenes, and may be due to rate-limiting steps preceding the bond-cleavage or differences in the reaction mechanism. Overall, significant isotope fractionation was observed and, therefore, CSIA can be applied to monitor the fate of brominated ethenes in the environment. Isotope effects differences, however, are not systematically comparable to chlorinated ethenes. Copyright © 2017 Elsevier Ltd. All rights reserved.

Production of D-tagatose, a low caloric sweetener during milk fermentation using L-arabinose isomerase.

PubMed

Rhimi, Moez; Chouayekh, Hichem; Gouillouard, Isabelle; Maguin, Emmanuelle; Bejar, Samir

2011-02-01

Lactobacillusdelbrueckii subsp. bulgaricus and Streptococcus thermophilus are used for the biotransformation of milk in yoghurt. During milk fermentation, these lactic acid bacteria (LAB) hydrolyze lactose producing a glucose moiety that is further metabolized and a galactose moiety that they are enable to metabolize. We investigated the ability of L. bulgaricus and S. thermophilus strains expressing a heterologous L-arabinose isomerase to convert residual D-galactose to D-tagatose. The Bacillus stearothermophilus US100l-arabinose isomerase (US100l-AI) was expressed in both LAB, using a new shuttle vector where the araA US100 gene is under the control of the strong and constitutive promoter of the L. bulgaricus ATCC 11842 hlbA gene. The production of L-AI by these LAB allowed the bioconversion of D-galactose to D-tagatose during fermentation in laboratory media and milk. We also established that the addition of L-AI to milk also allowed the conversion of D-galactose into D-tagatose during the fermentation process. Copyright © 2010 Elsevier Ltd. All rights reserved.

[Chemical constituents from Vaccinium bracteatum].

PubMed

Qu, Jing; Chen, Xia; Niu, Chang-Shan; Yu, Shi-Shan

2014-02-01

The chemical constituents of Vaccinium bracteatum were studied by means of macroporous resin, ODS column chromatography and preparative HPLC. Eleven compounds were isolated from this plant. By using ESI-MS and NMR, the structures of the eleven compounds were determined as 10-O-trans-p-coumaroyl-6alpha-hydroxyl-dihydromonotropein (1), 10-O-cis-p-coumaroyl -6alpha-hydroxyl-dihydromonotropein (2), vaccinoside (3), 10-O-cis-p-coumaroyl monotropein (4), isolariciresinol-9-O-beta-D-xyloside (5), tectoridin (6), vicenin-3 (7), quercetin-3-O-alpha-L-rhamnoside (8), quercetin-3-O-alpha-L-arabinopyranoside (9), quercetin-3-O-beta-D-galactopyranoside (10), and quercetin-3-O-beta-D-glucuronide (11), respectively. Compounds 1 and 2 are new, and compounds 4, 6 and 7 are isolated from the genus Vaccinium for the first time.

Synthesis of molecularly imprinted organic-inorganic hybrid azobenzene materials by sol-gel for radiation induced selective recognition of 2,4-dichlorophenoxyacetic acid

NASA Astrophysics Data System (ADS)

Shuai Jiang, Guang; An Zhong, Shi; Chen, Lan; Blakey, Idriss; Whitaker, Andrew

2011-02-01

A novel photoresponsive functional monomer bearing a siloxane polymerisable group and azobenzene moieties was synthesized. This monomer was then used to prepare photoresponsive molecularly imprinted polymers (MIP), which have specific binding sites for 2,4-dichlorophenoxyacetic acid (2,4-D) through hydrogen bonding moieties. The binding affinity of the imprinted recognition sites was switchable by alternate irradiations with ultraviolet and visible light, suggesting that azobenzene groups located inside the binding sites could be used as chemical sensors and the trans-cis isomerization could regulate the affinity for the 2,4-D. In addition, the concentration of the 2,4-D was able to be quantified by monitoring the trans-to-cis photoisomerization rate constant.

Three-dimensional femtosecond laser processing for lab-on-a-chip applications

NASA Astrophysics Data System (ADS)

Sima, Felix; Sugioka, Koji; Vázquez, Rebeca Martínez; Osellame, Roberto; Kelemen, Lóránd; Ormos, Pal

2018-02-01

The extremely high peak intensity associated with ultrashort pulse width of femtosecond laser allows us to induce nonlinear interaction such as multiphoton absorption and tunneling ionization with materials that are transparent to the laser wavelength. More importantly, focusing the femtosecond laser beam inside the transparent materials confines the nonlinear interaction only within the focal volume, enabling three-dimensional (3D) micro- and nanofabrication. This 3D capability offers three different schemes, which involve undeformative, subtractive, and additive processing. The undeformative processing preforms internal refractive index modification to construct optical microcomponents including optical waveguides. Subtractive processing can realize the direct fabrication of 3D microfluidics, micromechanics, microelectronics, and photonic microcomponents in glass. Additive processing represented by two-photon polymerization enables the fabrication of 3D polymer micro- and nanostructures for photonic and microfluidic devices. These different schemes can be integrated to realize more functional microdevices including lab-on-a-chip devices, which are miniaturized laboratories that can perform reaction, detection, analysis, separation, and synthesis of biochemical materials with high efficiency, high speed, high sensitivity, low reagent consumption, and low waste production. This review paper describes the principles and applications of femtosecond laser 3D micro- and nanofabrication for lab-on-a-chip applications. A hybrid technique that promises to enhance functionality of lab-on-a-chip devices is also introduced.

Anibamine and its Analogues as Novel Anti Prostate Cancer Agents

DTIC Science & Technology

2010-06-01

PC- 3, and DU-145 has been conducted continuously to evaluate the efficacy of more ligands. A molecular modeling study (3D QSAR ) protocol has been... Toxicology at Virginia Commonwealth University. Both the PI’s lab and Dr. 10 Selley’s lab have fully functional binding assay facility. The assays is...pursue the docking study and 3D QSAR study. 5.3 3D QSAR (Quantitative Structure-Activity Relationships) Study As proposed in our proposal, we will

Metabolic routes affecting rubber biosynthesis in Hevea brasiliensis latex

PubMed Central

Chow, Keng-See; Mat-Isa, Mohd.-Noor; Bahari, Azlina; Ghazali, Ahmad-Kamal; Alias, Halimah; Mohd.-Zainuddin, Zainorlina; Hoh, Chee-Choong; Wan, Kiew-Lian

2012-01-01

The cytosolic mevalonate (MVA) pathway in Hevea brasiliensis latex is the conventionally accepted pathway which provides isopentenyl diphosphate (IPP) for cis-polyisoprene (rubber) biosynthesis. However, the plastidic 2-C-methyl-D-erythritol 4-phosphate (MEP) pathway may be an alternative source of IPP since its more recent discovery in plants. Quantitative RT-PCR (qRT-PCR) expression profiles of genes from both pathways in latex showed that subcellular compartmentalization of IPP for cis-polyisoprene synthesis is related to the degree of plastidic carotenoid synthesis. From this, the occurrence of two schemes of IPP partitioning and utilization within one species is proposed whereby the supply of IPP for cis-polyisoprene from the MEP pathway is related to carotenoid production in latex. Subsequently, a set of latex unique gene transcripts was sequenced and assembled and they were then mapped to IPP-requiring pathways. Up to eight such pathways, including cis-polyisoprene biosynthesis, were identified. Our findings on pre- and post-IPP metabolic routes form an important aspect of a pathway knowledge-driven approach to enhancing cis-polyisoprene biosynthesis in transgenic rubber trees. PMID:22162870

Metabolic routes affecting rubber biosynthesis in Hevea brasiliensis latex.

PubMed

Chow, Keng-See; Mat-Isa, Mohd-Noor; Bahari, Azlina; Ghazali, Ahmad-Kamal; Alias, Halimah; Mohd-Zainuddin, Zainorlina; Hoh, Chee-Choong; Wan, Kiew-Lian

2012-03-01

The cytosolic mevalonate (MVA) pathway in Hevea brasiliensis latex is the conventionally accepted pathway which provides isopentenyl diphosphate (IPP) for cis-polyisoprene (rubber) biosynthesis. However, the plastidic 2-C-methyl-D-erythritol 4-phosphate (MEP) pathway may be an alternative source of IPP since its more recent discovery in plants. Quantitative RT-PCR (qRT-PCR) expression profiles of genes from both pathways in latex showed that subcellular compartmentalization of IPP for cis-polyisoprene synthesis is related to the degree of plastidic carotenoid synthesis. From this, the occurrence of two schemes of IPP partitioning and utilization within one species is proposed whereby the supply of IPP for cis-polyisoprene from the MEP pathway is related to carotenoid production in latex. Subsequently, a set of latex unique gene transcripts was sequenced and assembled and they were then mapped to IPP-requiring pathways. Up to eight such pathways, including cis-polyisoprene biosynthesis, were identified. Our findings on pre- and post-IPP metabolic routes form an important aspect of a pathway knowledge-driven approach to enhancing cis-polyisoprene biosynthesis in transgenic rubber trees.

NHEXAS PHASE I ARIZONA STUDY--STANDARD OPERATING PROCEDURE FOR CLEANING: ARIZONA LAB DATA (UA-D-24.0)

EPA Science Inventory

The purpose of this SOP is to define the steps involved in cleaning the electronic data generated from data entry of the Arizona Lab Data forms. It applies to electronic data corresponding to the Arizona Lab Data forms scanned and verified by the Data Staff during the Arizona NH...

NHEXAS PHASE I ARIZONA STUDY--STANDARD OPERATING PROCEDURE FOR CODING: ARIZONA LAB DATA (UA-D-13.0)

EPA Science Inventory

The purpose of this SOP is to define the coding strategy for Arizona Lab Data. This strategy was developed for use in the Arizona NHEXAS project and the "Border" study. Keywords: data; coding; lab data forms.

The National Human Exposure Assessment Survey (NHEXAS) is a federal ...

A rumen unprotected conjugated linoleic acid supplement inhibits milk fat synthesis and improves energy balance in lactating goats.

PubMed

Baldin, M; Gama, M A S; Dresch, R; Harvatine, K J; Oliveira, D E

2013-07-01

Feeding trans-10, cis-12 CLA supplements in a rumen-protected form has been shown to cause milk fat depression (MFD) in cows, ewes, and goats. Methyl esters of CLA were shown to be as effective as FFA in inducing MFD when infused postruminally, but their efficacy as a feed supplement has not been addressed in studies with lactating ruminants. In the present study, we investigated the effects of an unprotected trans-10, cis-12 CLA supplement as methyl esters on performance, milk composition, and energy status of dairy goats. Eighteen multiparous Toggenburg goats were randomly assigned to dietary treatments in a crossover experimental design (14 d treatment periods separated by a 7 d washout interval): 30 g/d of calcium salts of fatty acids (Control) or 30 g/d of a rumen unprotected CLA supplement containing 29.9% of trans-10, cis-12 CLA as methyl esters (CLA). Lipid supplements were mixed into a concentrate and fed individually to animals 3 times a day as a total mixed ration component. The DMI, milk yield, milk protein and lactose content and secretion, and somatic cell count were unaffected by CLA treatment. On the other hand, milk fat content and yield were reduced by 19.9 and 17.9% in CLA-fed goats. Reduced milk fat yield in CLA-fed goats was a consequence of a lower secretion of both preformed and de novo synthesized fatty acids. The CLA treatment also changed the milk fatty acid profile, which included a reduction in the concentration of SFA (2.5%), increased MUFA and PUFA (5.6 and 5.4%, respectively), and a pronounced increase (1576%) in milk fat trans-10, cis-12 CLA. Consistent with the high milk fat trans-10, cis-12 CLA content, all desaturase indexes were reduced in milk fat from CLA-fed goats. The MFD induced by CLA reduced the energy required for milk production by 22%, which was accompanied by an improvement in the estimated energy balance (P < 0.001), greater blood glucose concentration (P < 0.05), and a trend for increased BW (P = 0.08). Approximately 7.2% of trans-10, cis-12 CLA was estimated to escape from rumen biohydrogenation and indirect comparisons with data obtained from other studies suggest equivalent MFD between dietary CLA in the methyl ester form and rumen protected sources. Thus, despite the apparent low degree of rumen protection, our results suggest that methyl esters of CLA could be an alternative to rumen protected CLA supplements due to manufacturing and cost advantages.

Verifying Three-Dimensional Skull Model Reconstruction Using Cranial Index of Symmetry

PubMed Central

Kung, Woon-Man; Chen, Shuo-Tsung; Lin, Chung-Hsiang; Lu, Yu-Mei; Chen, Tzu-Hsuan; Lin, Muh-Shi

2013-01-01

Background Difficulty exists in scalp adaptation for cranioplasty with customized computer-assisted design/manufacturing (CAD/CAM) implant in situations of excessive wound tension and sub-cranioplasty dead space. To solve this clinical problem, the CAD/CAM technique should include algorithms to reconstruct a depressed contour to cover the skull defect. Satisfactory CAM-derived alloplastic implants are based on highly accurate three-dimensional (3-D) CAD modeling. Thus, it is quite important to establish a symmetrically regular CAD/CAM reconstruction prior to depressing the contour. The purpose of this study is to verify the aesthetic outcomes of CAD models with regular contours using cranial index of symmetry (CIS). Materials and methods From January 2011 to June 2012, decompressive craniectomy (DC) was performed for 15 consecutive patients in our institute. 3-D CAD models of skull defects were reconstructed using commercial software. These models were checked in terms of symmetry by CIS scores. Results CIS scores of CAD reconstructions were 99.24±0.004% (range 98.47–99.84). CIS scores of these CAD models were statistically significantly greater than 95%, identical to 99.5%, but lower than 99.6% (p<0.001, p = 0.064, p = 0.021 respectively, Wilcoxon matched pairs signed rank test). These data evidenced the highly accurate symmetry of these CAD models with regular contours. Conclusions CIS calculation is beneficial to assess aesthetic outcomes of CAD-reconstructed skulls in terms of cranial symmetry. This enables further accurate CAD models and CAM cranial implants with depressed contours, which are essential in patients with difficult scalp adaptation. PMID:24204566

Deinococcus frigens sp. nov., Deinococcus saxicola sp. nov., and Deinococcus marmoris sp. nov., low temperature and draught-tolerating, UV-resistant bacteria from continental Antarctica.

PubMed

Hirsch, Peter; Gallikowski, Claudia A; Siebert, Jörg; Peissl, Klaus; Kroppenstedt, Reiner; Schumann, Peter; Stackebrandt, Erko; Anderson, Robert

2004-11-01

Six Gram-positive, non-motile, UV- and draught-tolerant bacteria were isolated from antarctic soil and rock samples. The pink to orange cocci grew well on oligotrophic medium PYGV (pH 7.5) at 9-18 degrees C. They tolerated 0-10% NaCl, were aerobic to facultatively anaerobic and contained ornithine in their cell wall (type A3beta, Orn-Gly2). The lipid profiles of four strains were found to be typical for those of D. radiodurans. Major fatty acids were 16:1cis9, 15:1cis9, 17:1cis9 and i17:1cis9, the respiratory quinone of three strains was MK-8. Comparative 16S rDNA gene sequencing revealed phylogenetic relationships to the Deinococcus clade, especially to D. radiopugnans. The levels of 16S rRNA gene sequence similarity and DNA-DNA hybridisation data showed the six isolates represented new taxa. Phenotypic properties supported the description of three new species which were different from the eight known Deinococcus species and particularly from D. radiopugnans. Soil isolate AA-692T (DSM 12807T) is the type strain of Deinococcus frigens sp. nov., with AA-752 (DSM 15993) and AA-829 (DSM 15994) as additional strains from soil. The endolithic isolate AA-1444T, Deinococcus saxicola sp. nov., (DSM 15974T) came from antarctic sandstone, and Deinococcus marmoris sp. nov. (isolate AA-63T [DSM 12784T]) as well as AA-69 (DSM 15951) were isolated from antarctic marble.

CHEMICAL AND TOXICOLOGICAL EVALUATION OF CHLORINATED AND OZONATED-CHLORINATED DRINKING WATER: A COLLABORATION OF THE FOUR NATIONAL LABS OF THE U. S. EPA

EPA Science Inventory

CHEMICAL AND TOXICOLOGICAL EVALUATION OF CHLORINATED AND OZONATED-CHLORINATED DRINKING WATER: A COLLABORATION OF THE FOUR NATIONAL LABS OF THE U.S. EPA
Susan D. Richardson1, Linda K. Teuschler2, Alfred D. Thruston, Jr.,1 Thomas Speth3, Richard J. Miltner3, Glenn Rice2, Kathle...

Low cost lab-on-a-chip prototyping with a consumer grade 3D printer.

PubMed

Comina, Germán; Suska, Anke; Filippini, Daniel

2014-08-21

Versatile prototyping of 3D printed lab-on-a-chip devices, supporting different forms of sample delivery, transport, functionalization and readout, is demonstrated with a consumer grade printer, which centralizes all critical fabrication tasks. Devices cost 0.57US$ and are demonstrated in chemical sensing and micromixing examples, which exploit established principles from reference technologies.

Three Dimensional Morphodynamic and Vegetation Modeling of Wax Lake Delta

NASA Astrophysics Data System (ADS)

Khadka, A. K.; Meselhe, E. A.; Sadid, K. M.

2013-12-01

The Wax Lake Delta (WLD) is located at the downstream end of the Wax Lake outlet, approximately 13 miles upstream from Morgan City, Louisiana. In 1942 the United States Army Corps of Engineer (USACE) dredged Wax Lake Outlet channel from lower Atchafalaya River to reduce flood stages at Morgan City. The channel diverts 50% of Atchafalaya River water and sediment to WLD. Since 1942, the WLD has been building seaward due to the deposition of sediment at the channel mouth. Growth of this delta supports the concept of land building via river diversions. A process based morphodynamic model (Delft3D) with the ability to predict evolution of river-dominated deltas is used in this study to further our understanding of land-building and delta growth processes. Initial model bathymetry is prepared based on USACE hydrographic survey of 1998 along with LIDAR survey data for over bank areas. Two continuous gauges at Wax Lake outlet near Calumet and Atchafalaya Bay near Eugene Island are used to assign upstream inflow and outflow boundary conditions, respectively. The model is calibrated and validated for Hydrodynamics and Sediment transport through two sets of field observations for flooded and average conditions. Vertical velocity and suspended sediment profiles made in the channels of the WLD in 2000 and 2001 are used for the model calibration and validation. More comprehensive field observations are being gathered as part of an ongoing study funded by the National Science Foundation (FESD-Delta Dynamics Collaboratory). Data include mutli-beam bathymetric data, velocities, sediment, and nutrient concentrations in the channels as well as on top of the islands. The Delft3D morphodynamic model for WLD provides quantitative information regarding water and sediment distribution among the inter-connected channel bifurcations, the exchange of sediment and nutrients between the channels and islands. The model is being used to investigate the rate of land building and delta growth from the early 1970s to present. The model provides great insights on fluvial-marine sediment dispersal and retention within the delta which will enhance the planning and design of future land building projects of comparable design.

Molecular structure of the trans and cis isomers of metal-free phthalocyanine studied by gas-phase electron diffraction and high-level quantum chemical calculations: NH tautomerization and calculated vibrational frequencies.

PubMed

Strenalyuk, Tatyana; Samdal, Svein; Volden, Hans Vidar

2008-05-29

The molecular structure of the trans isomer of metal-free phthalocyanine (H2Pc) is determined using the gas electron diffraction (GED) method and high-level quantum chemical calculations. B3LYP calculations employing the basis sets 6-31G**, 6-311++G**, and cc-pVTZ give two tautomeric isomers for the inner H atoms, a trans isomer having D2h symmetry and a cis isomer having C2v symmetry. The trans isomer is calculated to be 41.6 (B3LYP/6-311++G**, zero-point corrected) and 37.3 kJ/mol (B3LYP/cc-pVTZ, not zero-point corrected) more stable than the cis isomer. However, Hartree-Fock (HF) calculations using different basis sets predict that cis is preferred and that trans does not exist as a stable form of the molecule. The equilibrium composition in the gas phase at 471 degrees C (the temperature of the GED experiment) calculated at the B3LYP/6-311++G** level is 99.8% trans and 0.2% cis. This is in very good agreement with the GED data, which indicate that the mole fraction of the cis isomer is close to zero. The transition states for two mechanisms of the NH tautomerization have been characterized. A concerted mechanism where the two H atoms move simultaneously yields a transition state of D2h symmetry and an energy barrier of 95.8 kJ/mol. A two-step mechanism where a trans isomer is converted to a cis isomer, which is converted into another trans isomer, proceeds via two transition states of C(s) symmetry and an energy barrier of 64.2 kJ/mol according to the B3LYP/6-311++G** calculation. The molecular geometry determined from GED is in very good agreement with the geometry obtained from the quantum chemical calculations. Vibrational frequencies, IR, and Raman intensities have been calculated using B3LYP/6-311++G**. These calculations indicate that the molecule is rather flexible with six vibrational frequencies in the range of 20-84 cm(-1) for the trans isomer. The cis isomer might be detected by infrared matrix spectroscopy since the N-H stretching frequencies are very different for the two isomers.

Centrally acting serotonergic and dopaminergic agents. 1. Synthesis and structure-activity relationships of 2,3,3a,4,5,9b-hexahydro-1H-benz[e]indole derivatives.

PubMed

Lin, C H; Haadsma-Svensson, S R; Lahti, R A; McCall, R B; Piercey, M F; Schreur, P J; Von Voigtlander, P F; Smith, M W; Chidester, C G

1993-04-16

The synthesis and structure-activity relationships (SAR) of 2,3,3a,4,5,9b-hexahydro-1H-benz[e]indole derivatives (3) are described. These compounds are conformationally restricted, angular tricyclic analogs of 2-aminotetralin. The synthesis was achieved in several steps from the corresponding 2-tetralones. The enantiomers of the cis analogs were obtained from either fractional recrystallizations of the diastereomeric salts of di-p-toluoyl-L-(or D)-tartaric acid or an asymmetric synthesis using chiral (R)-alpha-methylbenzylamine. All analogs were evaluated in the in vitro 5-HT1A and D2 binding assays and selected analogs were investigated further in biochemical and behavioral tests. Analogs with 9-methoxy substitution (R1 in 3) showed mixed 5-HT1A agonist and dopamine antagonist activities whereas the corresponding 9-hydroxy analogs displayed selective 5-HT1A agonist activity. The cis analogs were found to be more potent than the corresponding trans analogs and in the cis series, the (3aR)-(-)-enantiomers displayed higher potency. Nitrogen substitution (R2 in 3) with either an n-propyl or an allyl group produced similar activities whereas replacement with a bulky alpha-methylbenzyl group resulted in loss of activity. Analogs without aromatic substitution (R1 = H in 3) still showed good 5-HT1A agonist activity, although less potent than the 9-methoxy series. In this case, the trans analogs possessed equal or higher in vitro 5-HT1A affinity than the corresponding cis analogs. Analogs with either 6-methoxy or 6-hydroxy substitution (R1 in 3) were found to display dopamine antagonist properties. However, only N-allyl analogs showed this activity. In the 6-methoxy-N-allyl series, the cis analog was found to be more potent than the trans analog. Again, between the pair of cis enantiomers, the (3aR)-(-)-enantiomer showed higher potency. Incorporation of an additional methyl group into 9-methoxy cis analogs at C-2 resulted in retention of potent 5-HT1A agonist activity.

Research in Laser Processes

DTIC Science & Technology

1981-01-15

Jpn. 20, 357 (1966); C. H. Jackman , R. H. Garvey, and A. E. S. Green, J. Geophys. Res. 82, 5081 (1977). ’D. C. Cartwright, S. Trajmar, A. Chutjian...Appl Phys. 47. 3088 (1976) A .1 Palmer. I D Hess, Semiannual Rpt. # I, 2 (1975) #3 (1976) Hughes Res. lab., Malibu, Calif. ViPalmer. I D Hess...Semiannual Rpl Hughes Res. Lab,, Malibu. Call! #1, 2(1975) #3 (1976) 5.11 I. A.Schhe .1 Appl Phys. 47, I W7 (1976) 5.12 RShuker. L,Morgan, Ä

Implementing a 3D printing service in a biomedical library

PubMed Central

Walker, Verma

2017-01-01

Three-dimensional (3D) printing is opening new opportunities in biomedicine by enabling creative problem solving, faster prototyping of ideas, advances in tissue engineering, and customized patient solutions. The National Institutes of Health (NIH) Library purchased a Makerbot Replicator 2 3D printer to give scientists a chance to try out this technology. To launch the service, the library offered training, conducted a survey on service model preferences, and tracked usage and class attendance. 3D printing was very popular, with new lab equipment prototypes being the most common model type. Most survey respondents indicated they would use the service again and be willing to pay for models. There was high interest in training for 3D modeling, which has a steep learning curve. 3D printers also require significant care and repairs. NIH scientists are using 3D printing to improve their research, and it is opening new avenues for problem solving in labs. Several scientists found the 3D printer so helpful they bought one for their labs. Having a printer in a central and open location like a library can help scientists, doctors, and students learn how to use this technology in their work. PMID:28096747

Implementing a 3D printing service in a biomedical library.

PubMed

Walker, Verma

2017-01-01

Three-dimensional (3D) printing is opening new opportunities in biomedicine by enabling creative problem solving, faster prototyping of ideas, advances in tissue engineering, and customized patient solutions. The National Institutes of Health (NIH) Library purchased a Makerbot Replicator 2 3D printer to give scientists a chance to try out this technology. To launch the service, the library offered training, conducted a survey on service model preferences, and tracked usage and class attendance. 3D printing was very popular, with new lab equipment prototypes being the most common model type. Most survey respondents indicated they would use the service again and be willing to pay for models. There was high interest in training for 3D modeling, which has a steep learning curve. 3D printers also require significant care and repairs. NIH scientists are using 3D printing to improve their research, and it is opening new avenues for problem solving in labs. Several scientists found the 3D printer so helpful they bought one for their labs. Having a printer in a central and open location like a library can help scientists, doctors, and students learn how to use this technology in their work.

U.S.-MEXICO BORDER PROGRAM ARIZONA BORDER STUDY--STANDARD OPERATING PROCEDURE FOR CODING: ARIZONA LAB DATA (UA-D-13.0)

EPA Science Inventory

The purpose of this SOP is to define the coding strategy for Arizona Lab Data. This strategy was developed for use in the Arizona NHEXAS project and the Border study. Keywords: data; coding; lab data forms.

The U.S.-Mexico Border Program is sponsored by the Environmental Healt...

U.S.-MEXICO BORDER PROGRAM ARIZONA BORDER STUDY--STANDARD OPERATING PROCEDURE FOR CLEANING: ARIZONA LAB DATA (UA-D-24.0)

EPA Science Inventory

The purpose of this SOP is to define the steps involved in cleaning the electronic data generated from data entry of the Arizona Lab Data forms. It applies to electronic data corresponding to the Arizona Lab Data forms scanned and verified by the data staff during the Arizona NH...

Pair spectrometer hodoscope for Hall D at Jefferson Lab

DOE PAGES

Barbosa, Fernando J.; Hutton, Charles L.; Sitnikov, Alexandre; ...

2015-09-21

We present the design of the pair spectrometer hodoscope fabricated at Jefferson Lab and installed in the experimental Hall D. The hodoscope consists of thin scintillator tiles; the light from each tile is collected using wave-length shifting fibers and detected using a Hamamatsu silicon photomultiplier. Light collection was measured using relativistic electrons produced in the tagger area of the experimental Hall B.

Pair spectrometer hodoscope for Hall D at Jefferson Lab

DOE Office of Scientific and Technical Information (OSTI.GOV)

Barbosa, Fernando J.; Hutton, Charles L.; Sitnikov, Alexandre

We present the design of the pair spectrometer hodoscope fabricated at Jefferson Lab and installed in the experimental Hall D. The hodoscope consists of thin scintillator tiles; the light from each tile is collected using wave-length shifting fibers and detected using a Hamamatsu silicon photomultiplier. Light collection was measured using relativistic electrons produced in the tagger area of the experimental Hall B.

Determining Tidal Phase Differences from X-Band Radar Images

NASA Astrophysics Data System (ADS)

Newman, Kieran; Bell, Paul; Brown, Jennifer; Plater, Andrew

2017-04-01

Introduction Previous work by Bell et. al. (2016) has developed a method using X-band marine radar to measure intertidal bathymetry, using the waterline as a level over a spring-neap tidal cycle. This has been used in the Dee Estuary to give a good representation of the bathymetry in the area. However, there are some sources of inaccuracy in the method, as a uniform spatial tidal signal is assumed over the entire domain. Motivation The method used by Bell et. al. (2016) applies a spatially uniform tidal signal to the entire domain. This fails to account for fine-scale variations in water level and tidal phase. While methods are being developed to account for small-scale water level variations using high resolution modelling, a method to determine tidal phase variations directly from the radar intensity images could be advantageous operationally. Methods The tidal phase has been computed using two different methods, with hourly averaged images from 2008. In the first method, the cross-correlation between each raw pixel time series and a tidal signal at a number of lags is calculated, and the lag with the highest correlation to the pixel series is recorded. For the second method, the same method of correlation is used on signals generated by tracking movement of buoys, which show up strongly in the radar image as they move on their moorings with the tidal currents. There is a broad agreement between the two methods, but validation is needed to determine the relative accuracy. The phase has also been calculated using a Fourier decomposition, and agrees broadly with the above methods. Work also needs to be done to separate areas where the recorded phase is due to tidal current (mostly subtidal areas) or due to elevation (mostly the wetting/drying signal in intertidal areas), by classifying radar intensities by the phases and amplitudes of the tides. Filtering out signal variations due to wind strength and attenuation of the radar signal will also be applied. Validation Validation will be attempted using data from a POLCOMS-WAM model run for Liverpool Bay at 180m resolution for February 2008 (Brown, 2011), and ongoing work to develop a model at 5m resolution using DELFT3D-FLOW. There are also a series of ADCP and other direct measurements of tidal current and elevation available, although periods of measurement do not all overlap. However, this could still be used for some validation. Conclusion While this work is in very early stages, it could present a method to determine fine-scale variations in tidal phase without a network of current recorders, and an improvement in the accuracy of bathymetric methods using X-band Radar. References Bell, P.S., Bird, C.O., Plater, A.J., 2016. A temporal waterline approach to mapping intertidal areas using X-band marine radar. Coastal Engineering, 07: 84-101. Brown, J.M., Bolaños, R., Wolf, J., 2011. Impact assessment of advanced coupling features in a tide-surge-wave model, POLCOMS-WAM, in a shallow water application. Journal of Marine Systems, 87: 13-24. Deltares, 2010. Delft3D FLOW. Delft: Deltares.

Workers in SSPF monitor Multi-Equipment Interface Test.

NASA Technical Reports Server (NTRS)

2000-01-01

Workers in the Space Station Processing Facility control room check documentation during a Multi-Equipment Interface Test (MEIT) in the U.S. Lab Destiny. Members of the STS-98 crew are taking part in the MEIT checking out some of the equipment in the Lab. During the STS-98 mission, the crew will install the Lab on the station during a series of three space walks. The crew comprises five members: Commander Kenneth D. Cockrell, Pilot Mark L. Polansky, and Mission Specialists Robert L. Curbeam Jr., Thomas D. Jones (Ph.D.) and Marsha S. Ivins. The mission will provide the station with science research facilities and expand its power, life support and control capabilities. The U.S. Laboratory Module continues a long tradition of microgravity materials research, first conducted by Skylab and later Shuttle and Spacelab missions. Destiny is expected to be a major feature in future research, providing facilities for biotechnology, fluid physics, combustion, and life sciences research. The Lab is planned for launch aboard Space Shuttle Atlantis on the sixth ISS flight, currently targeted no earlier than Aug. 19, 2000.

Workers in SSPF monitor Multi-Equipment Interface Test.

NASA Technical Reports Server (NTRS)

2000-01-01

Workers in the Space Station Processing Facility control room monitor computers during a Multi-Equipment Interface Test (MEIT) in the U.S. Lab Destiny. Members of the STS-98 crew are taking part in the MEIT checking out some of the equipment in the Lab. During the STS-98 mission, the crew will install the Lab on the station during a series of three space walks. The crew comprises five members: Commander Kenneth D. Cockrell, Pilot Mark L. Polansky, and Mission Specialists Robert L. Curbeam Jr., Thomas D. Jones (Ph.D.) and Marsha S. Ivins. The mission will provide the station with science research facilities and expand its power, life support and control capabilities. The U.S. Laboratory Module continues a long tradition of microgravity materials research, first conducted by Skylab and later Shuttle and Spacelab missions. Destiny is expected to be a major feature in future research, providing facilities for biotechnology, fluid physics, combustion, and life sciences research. The Lab is planned for launch aboard Space Shuttle Atlantis on the sixth ISS flight, currently targeted no earlier than Aug. 19, 2000.

KSC-00pp0188

NASA Image and Video Library

2000-02-03

Workers in the Space Station Processing Facility control room monitor computers during a Multi-Equipment Interface Test (MEIT) in the U.S. Lab Destiny. Members of the STS-98 crew are taking part in the MEIT checking out some of the equipment in the Lab. During the STS-98 mission, the crew will install the Lab on the station during a series of three space walks. The crew comprises five members: Commander Kenneth D. Cockrell, Pilot Mark L. Polansky, and Mission Specialists Robert L. Curbeam Jr., Thomas D. Jones (Ph.D.) and Marsha S. Ivins. The mission will provide the station with science research facilities and expand its power, life support and control capabilities. The U.S. Laboratory Module continues a long tradition of microgravity materials research, first conducted by Skylab and later Shuttle and Spacelab missions. Destiny is expected to be a major feature in future research, providing facilities for biotechnology, fluid physics, combustion, and life sciences research. The Lab is planned for launch aboard Space Shuttle Atlantis on the sixth ISS flight, currently targeted no earlier than Aug. 19, 2000

Cell patterning by laser-assisted bioprinting.

PubMed

Devillard, Raphaël; Pagès, Emeline; Correa, Manuela Medina; Kériquel, Virginie; Rémy, Murielle; Kalisky, Jérôme; Ali, Muhammad; Guillotin, Bertrand; Guillemot, Fabien

2014-01-01

The aim of tissue engineering is to produce functional three-dimensional (3D) tissue substitutes. Regarding native organ and tissue complexity, cell density and cell spatial 3D organization, which influence cell behavior and fate, are key parameters in tissue engineering. Laser-Assisted Bioprinting (LAB) allows one to print cells and liquid materials with a cell- or picoliter-level resolution. Thus, LAB seems to be an emerging and promising technology to fabricate tissue-like structures that have the physiological functionality of their native counterparts. This technology has additional advantages such as automation, reproducibility, and high throughput. It makes LAB compatible with the (industrial) fabrication of 3D constructs of physiologically relevant sizes. Here we present exhaustively the numerous steps that allow printing of viable cells with a well-preserved micrometer pattern. To facilitate the understanding of the whole cell patterning experiment using LAB, it is discussed in two parts: (1) preprocessing: laser set-up, bio-ink cartridge and bio-paper preparation, and pattern design; and (2) processing: bio-ink printing on the bio-paper. Copyright © 2014 Elsevier Inc. All rights reserved.

Non Destructive 3D X-Ray Imaging of Nano Structures & Composites at Sub-30 NM Resolution, With a Novel Lab Based X-Ray Microscope

DTIC Science & Technology

2006-11-01

NON DESTRUCTIVE 3D X-RAY IMAGING OF NANO STRUCTURES & COMPOSITES AT SUB-30 NM RESOLUTION, WITH A NOVEL LAB BASED X- RAY MICROSCOPE S H Lau...article we describe a 3D x-ray microscope based on a laboratory x-ray source operating at 2.7, 5.4 or 8.0 keV hard x-ray energies. X-ray computed...tomography (XCT) is used to obtain detailed 3D structural information inside optically opaque materials with sub-30 nm resolution. Applications include

Mutations affecting transport of the hexitols D-mannitol, D-glucitol, and galactitol in Escherichia coli K-12: isolation and mapping.

PubMed Central

Lengeler, J

1975-01-01

Mutants of Escherichia coli K-12 unable to grow on any of the three naturally occurring hexitols D-manitol, D-glucitol, and galactitol and, among these specifically, mutants with altered transport and phosphorylating activity have been isolated. Different isolation procedures have been utilized, including suicide by D-[3H]mannitol, chemotaxis, and resistance to the toxic hexitol analogue 2-deoxy-arabino-hexitol. Mutations thus obtained have been mapped in four distinct operons. (i) Mutations affecting an enzyme II-complexmt1 activity of the phosphoenolpyruvate-dependent phosphotransferase system all map in gene mtlA. This gene has previously been shown (Solomon and Lin, 1972) to be part of an operon, mtl, located at 71 min on the E. coli linkage map containing, in addition to mtlA, the cis-dominant regulatory gene mtlC and mtlD, the structural gene for the enzyme D-mannitol-1-phosphate dehydrogenase. The gene order in this operon, induced by D-mannitol, is mtlC A D. (ii) Mutations in gene gutA affecting a second enzyme II-complexgut of the phosphotransferase system map at 51 min, clustered in operon gutC A D together with the cis-dominant regulatory gene gutC and the structural gene gutD for the enzyme D-glucitol-6-phosphate dehydrogenase. The gut operon, previously called sbl or srl, is induced by D-glucitol. (iii) Mutations affecting the transport and catabolism of galactitol are clustered in a third operon, gatC A D, located at 40.5 min. This operon again contains a cis-dominant regulatory gene, gatC, the structural gene gatD for galactitol-1-phosphate dehydrogenase, and gene gatA coding for a thrid hexitol-specific enzyme II-complexgat. Other genes coding for two additional enzymes involved in galactitol catabolism apparently are not linked to gatC A D. (iv) A fourth class of mutants pleiotropically negative for hexitol growth and transport maps in the pts operon. Triple-negative mutants (mtlA gutA gatA) do not have further transport or phosphorylating activity for any of the three hexitols. PMID:1100602

Chenier plain genesis explained by feedbacks between waves, mud, and sand

NASA Astrophysics Data System (ADS)

Nardin, William; Fagherazzi, Sergio

2017-04-01

Cheniers are sandy ridges parallel to the coast established by high energy waves. Here we discuss ontogeny of chenier plains through dimensional analysis and numerical results from the morphodynamic model Delft3D-SWAN. Our results show that wave energy and inner-shelf slope play an important role in the formation of chenier plains. In our numerical experiments, waves affect chenier plain development in three ways: by winnowing coarse sediment from the mudflat, by eroding mud and accumulating sand over the beach during extreme wave events. We further show that different sediment characteristics and wave climates can lead to three alternative coastal landscapes: strand plains, mudflats, or the more complex chenier plains. Low inner-shelf slopes are the most favorable for strand plain and chenier plain formation, while high slopes decrease the likelihood of mudflat development and preservation.

Chenier plain development: feedbacks between waves, mud and sand

NASA Astrophysics Data System (ADS)

Nardin, W.; Fagherazzi, S.

2015-12-01

Cheniers are sandy ridges parallel to the coast established by high energy waves. Here we discuss Chenier plains ontogeny through dimensional analysis and numerical results from the morphodynamic model Delft3D-SWAN. Our results show that wave energy and shelf slope play an important role in the formation of Chenier plains. In our numerical experiments waves affect Chenier plain development in three ways: by winnowing sediment from the mudflat, by eroding mud and accumulating sand over the beach during extreme wave events. We further show that different sediment characteristics and wave climates can lead to three alternative coastal landscapes: strand plains, mudflats, or the more complex Chenier plains. Low inner-shelf slopes are the most favorable for strand plain and Chenier plain formation, while high slopes decrease the likelihood of mudflat development and preservation.

Interactive reconstructions of cranial 3D implants under MeVisLab as an alternative to commercial planning software.

PubMed

Egger, Jan; Gall, Markus; Tax, Alois; Ücal, Muammer; Zefferer, Ulrike; Li, Xing; von Campe, Gord; Schäfer, Ute; Schmalstieg, Dieter; Chen, Xiaojun

2017-01-01

In this publication, the interactive planning and reconstruction of cranial 3D Implants under the medical prototyping platform MeVisLab as alternative to commercial planning software is introduced. In doing so, a MeVisLab prototype consisting of a customized data-flow network and an own C++ module was set up. As a result, the Computer-Aided Design (CAD) software prototype guides a user through the whole workflow to generate an implant. Therefore, the workflow begins with loading and mirroring the patients head for an initial curvature of the implant. Then, the user can perform an additional Laplacian smoothing, followed by a Delaunay triangulation. The result is an aesthetic looking and well-fitting 3D implant, which can be stored in a CAD file format, e.g. STereoLithography (STL), for 3D printing. The 3D printed implant can finally be used for an in-depth pre-surgical evaluation or even as a real implant for the patient. In a nutshell, our research and development shows that a customized MeVisLab software prototype can be used as an alternative to complex commercial planning software, which may also not be available in every clinic. Finally, not to conform ourselves directly to available commercial software and look for other options that might improve the workflow.

Interactive reconstructions of cranial 3D implants under MeVisLab as an alternative to commercial planning software

PubMed Central

Egger, Jan; Gall, Markus; Tax, Alois; Ücal, Muammer; Zefferer, Ulrike; Li, Xing; von Campe, Gord; Schäfer, Ute; Schmalstieg, Dieter; Chen, Xiaojun

2017-01-01

In this publication, the interactive planning and reconstruction of cranial 3D Implants under the medical prototyping platform MeVisLab as alternative to commercial planning software is introduced. In doing so, a MeVisLab prototype consisting of a customized data-flow network and an own C++ module was set up. As a result, the Computer-Aided Design (CAD) software prototype guides a user through the whole workflow to generate an implant. Therefore, the workflow begins with loading and mirroring the patients head for an initial curvature of the implant. Then, the user can perform an additional Laplacian smoothing, followed by a Delaunay triangulation. The result is an aesthetic looking and well-fitting 3D implant, which can be stored in a CAD file format, e.g. STereoLithography (STL), for 3D printing. The 3D printed implant can finally be used for an in-depth pre-surgical evaluation or even as a real implant for the patient. In a nutshell, our research and development shows that a customized MeVisLab software prototype can be used as an alternative to complex commercial planning software, which may also not be available in every clinic. Finally, not to conform ourselves directly to available commercial software and look for other options that might improve the workflow. PMID:28264062

Aerobic and Anaerobic Transformation of cis-Dichloroethene (cis-DCE) and Vinyl Chloride (VC): Steps for Reliable Remediation

DTIC Science & Technology

2003-12-01

populations. (ii) Characterization of Dehalococeoides sp . strain FL2. The isolate, designate d Dehalococcoides sp . strain FL2, reductively...Pinellas group of the Dehalococcoides cluster, and demonstrated that strain FL2 shared an identical 165 rRNA gene sequence with Dehalococcoides sp ...strain CBDBI, a chlorobenzene-dechlorinating strain. The 165 rRNA gene sequence of Dehalococcoides sp . strain FL2 was submitted to GenBank (AF357918.2

Comparative genome sequencing of Drosophila pseudoobscura: Chromosomal, gene, and cis-element evolution

PubMed Central

Richards, Stephen; Liu, Yue; Bettencourt, Brian R.; Hradecky, Pavel; Letovsky, Stan; Nielsen, Rasmus; Thornton, Kevin; Hubisz, Melissa J.; Chen, Rui; Meisel, Richard P.; Couronne, Olivier; Hua, Sujun; Smith, Mark A.; Zhang, Peili; Liu, Jing; Bussemaker, Harmen J.; van Batenburg, Marinus F.; Howells, Sally L.; Scherer, Steven E.; Sodergren, Erica; Matthews, Beverly B.; Crosby, Madeline A.; Schroeder, Andrew J.; Ortiz-Barrientos, Daniel; Rives, Catharine M.; Metzker, Michael L.; Muzny, Donna M.; Scott, Graham; Steffen, David; Wheeler, David A.; Worley, Kim C.; Havlak, Paul; Durbin, K. James; Egan, Amy; Gill, Rachel; Hume, Jennifer; Morgan, Margaret B.; Miner, George; Hamilton, Cerissa; Huang, Yanmei; Waldron, Lenée; Verduzco, Daniel; Clerc-Blankenburg, Kerstin P.; Dubchak, Inna; Noor, Mohamed A.F.; Anderson, Wyatt; White, Kevin P.; Clark, Andrew G.; Schaeffer, Stephen W.; Gelbart, William; Weinstock, George M.; Gibbs, Richard A.

2005-01-01

We have sequenced the genome of a second Drosophila species, Drosophila pseudoobscura, and compared this to the genome sequence of Drosophila melanogaster, a primary model organism. Throughout evolution the vast majority of Drosophila genes have remained on the same chromosome arm, but within each arm gene order has been extensively reshuffled, leading to a minimum of 921 syntenic blocks shared between the species. A repetitive sequence is found in the D. pseudoobscura genome at many junctions between adjacent syntenic blocks. Analysis of this novel repetitive element family suggests that recombination between offset elements may have given rise to many paracentric inversions, thereby contributing to the shuffling of gene order in the D. pseudoobscura lineage. Based on sequence similarity and synteny, 10,516 putative orthologs have been identified as a core gene set conserved over 25–55 million years (Myr) since the pseudoobscura/melanogaster divergence. Genes expressed in the testes had higher amino acid sequence divergence than the genome-wide average, consistent with the rapid evolution of sex-specific proteins. Cis-regulatory sequences are more conserved than random and nearby sequences between the species—but the difference is slight, suggesting that the evolution of cis-regulatory elements is flexible. Overall, a pattern of repeat-mediated chromosomal rearrangement, and high coadaptation of both male genes and cis-regulatory sequences emerges as important themes of genome divergence between these species of Drosophila. PMID:15632085

Effect of incremental levels of sunflower-seed oil in the diet on ruminal lipid metabolism in lactating cows.

PubMed

Shingfield, K J; Ahvenjärvi, S; Toivonen, V; Vanhatalo, A; Huhtanen, P; Griinari, J M

2008-05-01

Based on the potential benefits of cis-9, trans-11-conjugated linoleic acid (CLA) for human health there is interest in developing sustainable nutritional strategies for enhancing the concentration of this fatty acid in ruminant-derived foods. Most evidence to date suggests that endogenous synthesis is the major source of cis-9, trans-11 in milk fat and ruminal outflow is limited and largely independent of dietary 18 : 2n-6 supply. Four lactating cows fitted with a rumen cannula were used in a 4 x 4 Latin square with 14 d experimental periods to examine the effects of sunflower-seed oil (SFO) as a source of 18 : 2n-6 on ruminal lipid metabolism. Cows were offered grass silage-based diets supplemented with 0, 250, 500 or 750 g SFO/d. Supplements of SFO had no effect on DM intake, milk fat or protein secretion, but increased linearly (P < 0.01) milk yield and milk lactose output and shifted (P < 0.001) rumen fermentation towards propionate at the expense of acetate. SFO supplements increased linearly (P < 0.05) the flow of 18 : 0, 18 : 1, 18 : 2n-6 and total CLA at the omasum and enhanced ruminal cis-9-18 : 1, 18 : 2n-6 and 18 : 3n-3 metabolism. Flows of all-trans- (Delta4-16) and cis- (Delta9-16) 18 : 1 isomers were elevated, while increases in ruminal CLA outflow were confined to trans-8, trans-10 and geometric 9,11 and 10,12 isomers. It is concluded that supplementing grass silage-based diets with plant oils rich in 18 : 2n-6 enhances ruminal outflow of trans-11-18 : 1 and cis-9, trans-11-CLA in lactating cows.

Antony van Leeuwenhoek's microscopes and other scientific instruments: new information from the Delft archives.

PubMed

Zuidervaart, Huib J; Anderson, Douglas

2016-07-01

This paper discusses the scientific instruments made and used by the microscopist Antony van Leeuwenhoek (1632-1723). The immediate cause of our study was the discovery of an overlooked document from the Delft archive: an inventory of the possessions that were left in 1745 after the death of Leeuwenhoek's daughter Maria. This list sums up which tools and scientific instruments Leeuwenhoek possessed at the end of his life, including his famous microscopes. This information, combined with the results of earlier historical research, gives us new insights about the way Leeuwenhoek began his lens grinding and how eventually he made his best lenses. It also teaches us more about Leeuwenhoek's work as a surveyor and a wine gauger. A further investigation of the 1747 sale of Leeuwenhoek's 531 single lens microscopes has not only led us to the identification of nearly all buyers, but also has provided us with some explanation about why only a dozen of this large number of microscopes has survived.

Correlated natural transition orbital framework for low-scaling excitation energy calculations (CorNFLEx).

PubMed

Baudin, Pablo; Kristensen, Kasper

2017-06-07

We present a new framework for calculating coupled cluster (CC) excitation energies at a reduced computational cost. It relies on correlated natural transition orbitals (NTOs), denoted CIS(D')-NTOs, which are obtained by diagonalizing generalized hole and particle density matrices determined from configuration interaction singles (CIS) information and additional terms that represent correlation effects. A transition-specific reduced orbital space is determined based on the eigenvalues of the CIS(D')-NTOs, and a standard CC excitation energy calculation is then performed in that reduced orbital space. The new method is denoted CorNFLEx (Correlated Natural transition orbital Framework for Low-scaling Excitation energy calculations). We calculate second-order approximate CC singles and doubles (CC2) excitation energies for a test set of organic molecules and demonstrate that CorNFLEx yields excitation energies of CC2 quality at a significantly reduced computational cost, even for relatively small systems and delocalized electronic transitions. In order to illustrate the potential of the method for large molecules, we also apply CorNFLEx to calculate CC2 excitation energies for a series of solvated formamide clusters (up to 4836 basis functions).

Vitamin D3 and its synthetic analogue secocholestra-trien-1,2, 24-triol influence the metabolism and the isomerization of retinoic acid in human keratinocytes.

PubMed

Jugert, F K; Roos, T C; Notzon, I; Merk, H F

1998-01-01

Vitamin D and vitamin A acid share metabolic pathways thereby influencing their benefit as a given drug. Little is known concerning their metabolic interactions in epidermal cells. We compared the influence of 1,25-dihydroxycholecalciferol (vitamin D3 - VD3) and its synthetic analogue secocholestra-trien-1,3,24-triol (tacalcitol - TAC) in combination with different calcium concentrations (Ca) on the metabolism and the isomerization of retinoic acid (RA) in cultured primary human keratinocytes. After preincubation with 0.09, 0.6 and 1.2 mM Ca for 24 h, followed by the addition of 10(-6), 10(-8) or 10(-10) M VD3 or TAC, we added 10(-5) M 13-cis-RA (isotretinoin). 24 h later, concentrations of RA isomers and oxidated RA metabolites were measured by RP-HPLC. VD3 (10(-6) M) inhibited the isomerization of 13-cis-RA to all-trans-RA (tretinoin) and 9-cis-RA independently from the Ca concentration in the culture medium. 10(-6)-10(-10) M TAC equally inhibit the 4-hydroxylation of all-trans-RA significantly (12.8 vs. 6.7% of total RA), thereby reducing the amount of irreversible inactivated 4-oxo-all-trans-RA, leading to a higher persistence of all-trans-RA, the active hormone. Both VD3 and its analogue TAC influence the metabolism of RA, a well-known regulator of epithelial cell proliferation and differentiation processes, in two distinct ways. Further studies are necessary to test the hypothesis that the hormone activity of RA can be increased by concomitant treatment with VD3 which prolongs the persistence of 13-cis-RA, and TAC elevating the intracellular concentration of all-trans-RA.

Photochemistry of the Stilbenes in Methanol. Trapping the Common Phantom Singlet State.

PubMed

Saltiel, Jack; Gupta, Shipra

2018-06-21

A comparative study of the photochemistry of cis- and trans-stilbene in methanol shows that both isomers undergo methanol photoaddition giving similar yields of α-methoxybibenzyl in competition with cis-trans photoisomerization. Methanol addition occurs primarily following torsional relaxation of the lowest excited singlet states of each isomer, 1 c* and 1 t*, to a common twisted singlet excited state intermediate, 1 p*, initially called the phantom singlet state. The addition is consistent with the zwitterionic character of 1 p*. Ether forms by direct 1,2-addition of CH 3 OH to the central carbon atoms and by 1,1-addition following rearrangement to 1-benzyl-1-phenylcarbene. Use of CD 3 OD and GC/MS (gas chromatographic/mass spectroscopic) analysis of the ether products revealed that the ratio of carbene/direct addition pathways is higher starting from cis-stilbene. We conclude that 1 p* formed from 1 c* is hotter than 1 p* formed from 1 t*. Surprisingly, except for favoring the carbene pathway, the use of higher energy photons (254 vs 313 nm) does not affect the overall ether quantum yield starting from cis-stilbene, but significantly enhances both pathways starting from trans-stilbene. It appears that carbene formation and direct methanol addition to higher trans-stilbene excited state(s) compete with relaxation to S 1 . Substitution of D for the vinyl Hs of stilbene enhances the direct addition pathway more than two-fold and strongly suppresses the carbene insertion pathway, revealing a large, k pc d0 / k pc d2 = 6.3, primary deuterium isotope effect in the carbene rearrangement. The two-fold increase in the ether quantum yield is due primarily to a 2.75-fold increase in the lifetime of 1 p* on deuterium substitution of the vinyl hydrogens.

Effectiveness of Learning with 3D-Lab on Omani Basic Education Students' Achievement, Attitudes and Scientific Thinking

ERIC Educational Resources Information Center

Musawi, Ali Al; Ambusaidi, Abdullah; Al-Balushi, Sulaiman; Al-Sinani, Mohamed; Al-Balushi, Kholoud

2017-01-01

This paper aims to measure the effectiveness of the 3DL on Omani students' acquisition of practical abilities and skills. It examines the effectiveness of the 3D-lab in science education and scientific thinking acquisition as part of a national project funded by The Research Council. Four research tools in a Pre-Post Test Control Group Design,…

An Approach to Assessment of Relief Formats for Hardcopy Topographic Maps

DTIC Science & Technology

1979-04-01

Topographic Lab, Ft Delvoir, ATTN: ETL- TD --S I USA Rsch Dfc , Durham, ATTN: Life Sciences Dir I USA Topographic Lab, Ft Belvoir, ATTN. STINFO Centel 2 USAftIEM...Date Ented) ~2O 1a~designers will be ~interested in this report. NTIS G~A&.1 D2DC TAR 4 I UNCLASS I iFI tD SEUIYc4.O HS ~t~"Oarrfi Technical Paper

Structure of the cyclic peptide [W8S]contryphan Vn: effect of the tryptophan/serine substitution on trans-cis proline isomerization.

PubMed

Nepravishta, Ridvan; Mandaliti, Walter; Melino, Sonia; Eliseo, Tommaso; Paci, Maurizio

2014-12-01

The structural characterization of [W8S]contryphan Vn, an analogue of Contryphan Vn with tryptophan 8 substituted with a serine residue (W8S), was performed by NMR spectroscopy, molecular dynamics simulations and fluorescence spectroscopy. Contryphan Vn, a bioactive cyclic peptide from the venom of the cone snail Conus ventricosus, contains an S-S bridge between two cysteines and a D-tryptophan. Like other Contryphans, [W8S]contryphan Vn has proline 7 isomerized trans, while the proline 4 has nearly equivalent populations of cis and trans configurations. The thermodynamic and kinetic parameters of the trans-cis isomerization of proline 4 were measured. The isomers of [W8S]contryphan Vn with proline 4 in cis and trans show structural differences. The absence of the salt bridge between the same Asp2 and Lys6, present in Contryphan Vn, may be attributed to the lack of the hydrophobic side chain of Trp8 where it likely protects the electrostatic interactions. These results may contribute to identifying, in these cyclic peptides, the structural determinants of the mechanism of proline trans-cis isomerization, this being also an important step in protein folding.

Multiscale Modeling of Non-crystalline Ceramics (Glass) (FY11)

DTIC Science & Technology

2012-01-01

interatomic potential model for oxides, silicates, and silica-based glasses. J. Phys. Chem. B 2006, 110 (24), 11780–11795. 9. van Beest , B. W. H.; Kramer, G. J...DIRECTOR US ARMY RESEARCH LAB IMNE ALC HRR 2800 POWDER MILL RD ADELPHI MD 20783-1197 1 DIRECTOR US ARMY RESEARCH LAB RDRL CIO LL 2800 POWDER MILL RD...ADELPHI MD 20783-1197 1 DIRECTOR US ARMY RESEARCH LAB RDRL CIO MT 2800 POWDER MILL RD ADELPHI MD 20783-1197 1 DIRECTOR US ARMY RESEARCH LAB RDRL D 2800

Evaluating cis-2,6-Dimethylpiperidide (cis-DMP) as a Base Component in Lithium-Mediated Zincation Chemistry

PubMed Central

Armstrong, David R; Garden, Jennifer A; Kennedy, Alan R; Leenhouts, Sarah M; Mulvey, Robert E; O'Keefe, Philip; O'Hara, Charles T; Steven, Alan

2013-01-01

Most recent advances in metallation chemistry have centred on the bulky secondary amide 2,2,6,6-tetramethylpiperidide (TMP) within mixed metal, often ate, compositions. However, the precursor amine TMP(H) is rather expensive so a cheaper substitute would be welcome. Thus this study was aimed towards developing cheaper non-TMP based mixed-metal bases and, as cis-2,6-dimethylpiperidide (cis-DMP) was chosen as the alternative amide, developing cis-DMP zincate chemistry which has received meagre attention compared to that of its methyl-rich counterpart TMP. A new lithium diethylzincate, [(TMEDA)LiZn(cis-DMP)Et2] (TMEDA=N,N,N′,N′-tetramethylethylenediamine) has been synthesised by co-complexation of Li(cis-DMP), Et2Zn and TMEDA, and characterised by NMR (including DOSY) spectroscopy and X-ray crystallography, which revealed a dinuclear contact ion pair arrangement. By using N,N-diisopropylbenzamide as a test aromatic substrate, the deprotonative reactivity of [(TMEDA)LiZn(cis-DMP)Et2] has been probed and contrasted with that of the known but previously uninvestigated di-tert-butylzincate, [(TMEDA)LiZn(cis-DMP)tBu2]. The former was found to be the superior base (for example, producing the ortho-deuteriated product in respective yields of 78 % and 48 % following D2O quenching of zincated benzamide intermediates). An 88 % yield of 2-iodo-N,N-diisopropylbenzamide was obtained on reaction of two equivalents of the diethylzincate with the benzamide followed by iodination. Comparisons are also drawn using 1,1,1,3,3,3-hexamethyldisilazide (HMDS), diisopropylamide and TMP as the amide component in the lithium amide, Et2Zn and TMEDA system. Under certain conditions, the cis-DMP base system was found to give improved results in comparison to HMDS and diisopropylamide (DA), and comparable results to a TMP system. Two novel complexes isolated from reactions of the di-tert-butylzincate and crystallographically characterised, namely the pre-metallation complex [{(iPr)2N(Ph)C=O}LiZn(cis-DMP)tBu2] and the post-metallation complex [(TMEDA)Li(cis-DMP){2-[1-C(=O)N(iPr)2]C6H4}Zn(tBu)], shed valuable light on the structures and mechanisms involved in these alkali-metal-mediated zincation reactions. Aspects of these reactions are also modelled by DFT calculations. PMID:23955639

In tight junctions, claudins regulate the interactions between occludin, tricellulin and marvelD3, which, inversely, modulate claudin oligomerization.

PubMed

Cording, Jimmi; Berg, Johanna; Käding, Nadja; Bellmann, Christian; Tscheik, Christian; Westphal, Julie K; Milatz, Susanne; Günzel, Dorothee; Wolburg, Hartwig; Piontek, Jörg; Huber, Otmar; Blasig, Ingolf Ernst

2013-01-15

Tight junctions seal the paracellular cleft of epithelia and endothelia, form vital barriers between tissue compartments and consist of tight-junction-associated marvel proteins (TAMPs) and claudins. The function of TAMPs and the interaction with claudins are not understood. We therefore investigated the binding between the TAMPs occludin, tricellulin, and marvelD3 and their interaction with claudins in living tight-junction-free human embryonic kidney-293 cells. In contrast to claudins and occludin, tricellulin and marvelD3 showed no enrichment at cell-cell contacts indicating lack of homophilic trans-interaction between two opposing cell membranes. However, occludin, marvelD3 and tricellulin exhibited homophilic cis-interactions, along one plasma membrane, as measured by fluorescence resonance energy transfer. MarvelD3 also cis-interacted with occludin and tricellulin heterophilically. Classic claudins, such as claudin-1 to -5 may show cis-oligomerization with TAMPs, whereas the non-classic claudin-11 did not. Claudin-1 and -5 improved enrichment of occludin and tricellulin at cell-cell contacts. The low mobile claudin-1 reduced the membrane mobility of the highly mobile occludin and tricellulin, as studied by fluorescence recovery after photobleaching. Co-transfection of claudin-1 with TAMPs led to changes of the tight junction strand network of this claudin to a more physiological morphology, depicted by freeze-fracture electron microscopy. The results demonstrate multilateral interactions between the tight junction proteins, in which claudins determine the function of TAMPs and vice versa, and provide deeper insights into the tight junction assembly.

Photoisomerization and photochemistry of matrix-isolated 3-furaldehyde.

PubMed

Kuş, Nihal; Reva, Igor; Fausto, Rui

2010-12-02

3-Furaldehyde (3FA) was isolated in an argon matrix at 12 K and studied using FTIR spectroscopy and quantum chemistry. The molecule has two conformers, with trans and cis orientation of the O=C-C=C dihedral angle. At the B3LYP/6-311++G(d,p) level of theory, the trans form was computed to be ca. 4 kJ mol(-1) more stable than the cis form. The relative stability of the two conformers was explained using the natural bond orbital (NBO) method. In fair agreement with their calculated relative energies and the high barrier of rotamerization (ca. 34 kJ mol(-1) from trans to cis), the trans and cis conformers were trapped in an argon matrix from the compound room temperature gas phase in proportion ~7:1. The experimentally observed vibrational signatures of the two forms are in a good agreement with the theoretically calculated spectra. Broad-band UV-irradiation (λ > 234 nm) of the matrix-isolated compound resulted in partial trans → cis isomerization, which ended at a photostationary state with the trans/cis ratio being ca. 1.85:1. This result was interpreted based on results of time-dependent DFT calculations. Irradiation at higher energies (λ > 200 nm) led to decarbonylation of the compound, yielding furan, cyclopropene-3-carbaldehyde, and two C(3)H(4) isomers: cyclopropene and propadiene.

Universal lab-on-a-chip platform for complex, perfused 3D cell cultures

NASA Astrophysics Data System (ADS)

Sonntag, F.; Schmieder, F.; Ströbel, J.; Grünzner, S.; Busek, M.; Günther, K.; Steege, T.; Polk, C.; Klotzbach, U.

2016-03-01

The miniaturization, rapid prototyping and automation of lab-on-a-chip technology play nowadays a very important role. Lab-on-a-chip technology is successfully implemented not only for environmental analysis and medical diagnostics, but also as replacement of animals used for the testing of substances in the pharmaceutical and cosmetics industries. For that purpose the Fraunhofer IWS and partners developed a lab-on-a-chip platform for perfused cell-based assays in the last years, which includes different micropumps, valves, channels, reservoirs and customized cell culture modules. This technology is already implemented for the characterization of different human cell cultures and organoids, like skin, liver, endothelium, hair follicle and nephron. The advanced universal lab-on-a-chip platform for complex, perfused 3D cell cultures is divided into a multilayer basic chip with integrated micropump and application-specific 3D printed cell culture modules. Moreover a technology for surface modification of the printed cell culture modules by laser micro structuring and a complex and flexibly programmable controlling device based on an embedded Linux system was developed. A universal lab-on-a-chip platform with an optional oxygenator and a cell culture module for cubic scaffolds as well as first cell culture experiments within the cell culture device will be presented. The module is designed for direct interaction with robotic dispenser systems. This offers the opportunity to combine direct organ printing of cells and scaffolds with the microfluidic cell culture module. The characterization of the developed system was done by means of Micro-Particle Image Velocimetry (μPIV) and an optical oxygen measuring system.

Study of dehydroxylated-rehydroxylated smectites by SAXS

NASA Astrophysics Data System (ADS)

Muller, F.; Pons, C.-H.; Papin, A.

2002-07-01

Montmorillonite and beidellite are dioctahedral 2:1 phyllosilicates. The weakness of the bonding between layers allows the intercalation of water molecules (disposed in layers) in the interlayer space. The samples studied are constituted of cv layers (cv for vacant octahedral sites in cis positions). They have been dehydroxylated. This is accompanied by the migration of the octahedral cations from former trans-octahedra to empty cis-sites therefore the layers become tv (vacant site in trans position). To characterize the stacking of the layers, SAXS (Small Angle X-ray Scattering) analyses have been investigated in natural (N) and after a dehydroxylation-rehydroxylation cycle (R) states. The SAXS pattern modelisation for Na -exchanged samples in the N state shows that the layers stack in particles with well defined interlayer distances d_{001}, corresponding to 0 water layer, 1 water layers and 2 water layers. The dehydroxylation-rehydroxylation cycle increases the proportion of interlayer distances with zero water layer and the disorder in the stacking. The decreasing of the disorder parameter with the proportion of tetrahedral charge in the N and R sample shows that the distribution of the water layers depend on the localization of the deficit of charge. Les montmorillonites et les smectites sont des phyllosilicates 2:1 dioctaédriques. Les liaisons entre feuillets sont suffisamment faibles pour permettre l'insertion, dans l'espace interfoliaire, de molécules d'eau qui se disposent en couches. Les échantillons étudiés ont des feuillets cis-vacants (le site octaédrique inoccupé est en une des deux positions “cis”). Ils ont été deshydroxylés. Ceci s'accompagne d'une migration cationique, à l'intérieur des couches octaédriques, des sites trans vers les sites cis et le feuillet devient trans-vacant. Des expériences de Diffusion X aux Petits Angles (DPA) ont permis de caractériser l'empilement des feuillets. La modélisation des diagrammes de DPAX met en évidence, pour les échantillons sodique non traités, des empilements de feuillets formant des particules avec des distances interlamellaires à 0, 1 et 2 couches d'eau. Après le cycle de déshydroxylation-réhydroxylation, la proportion de feuillets avec une distance interlamellaire correspondante à zéro couche d'eau et le désordre dans l'empi lement des feuillets augmentent. La décroissance du paramètre de désordre avec la proportion de charges tetraédriques montre que l'organi sation des couches d'eau dépend de la localisation du déficit de charge.

CSF total protein

MedlinePlus

CSF total protein is a test to determine the amount of protein in your spinal fluid, also called cerebrospinal fluid (CSF). ... The normal protein range varies from lab to lab, but is typically about 15 to 60 milligrams per deciliter (mg/dL) ...

National Dam Safety Program. Summit Street Lake Dam (Inventory Number N.Y. 847), Lower Hudson River Basin, Columbia County, New York. Phase I Inspection Report,

DTIC Science & Technology

1981-05-04

8217 Aav a 7p or S p4005 b. Inspection Personnel R. E/VA/- L4., LA/- / c. Persons Contacted (Including Address & Phone No.) d. History: Date Constructed...Apr. 25 (gags height, 6.18 it): minimt, 4.9 cis Sept. 30. 160-66: rHasnum .~ hsc rue. 1.940 cfs Feb. 26. 1961 (gage heiqht, 7.68 it); minimum, 0.8 cis

Impact of adenosine nucleotide translocase (ANT) proline isomerization on Ca2+-induced cysteine relative mobility/mitochondrial permeability transition pore.

PubMed

Pestana, Cezar R; Silva, Carlos H T P; Uyemura, Sérgio A; Santos, Antonio C; Curti, Carlos

2010-08-01

Mitochondrial membrane carriers containing proline and cysteine, such as adenine nucleotide translocase (ANT), are potential targets of cyclophilin D (CyP-D) and potential Ca(2+)-induced permeability transition pore (PTP) components or regulators; CyP-D, a mitochondrial peptidyl-prolyl cis-trans isomerase, is the probable target of the PTP inhibitor cyclosporine A (CsA). In the present study, the impact of proline isomerization (from trans to cis) on the mitochondrial membrane carriers containing proline and cysteine was addressed using ANT as model. For this purpose, two different approaches were used: (i) Molecular dynamic (MD) analysis of ANT-Cys(56) relative mobility and (ii) light scattering techniques employing rat liver isolated mitochondria to assess both Ca(2+)-induced ANT conformational change and mitochondrial swelling. ANT-Pro(61) isomerization increased ANT-Cys(56) relative mobility and, moreover, desensitized ANT to the prevention of this effect by ADP. In addition, Ca(2+) induced ANT "c" conformation and opened PTP; while the first effect was fully inhibited, the second was only attenuated by CsA or ADP. Atractyloside (ATR), in turn, stabilized Ca(2+)-induced ANT "c" conformation, rendering the ANT conformational change and PTP opening less sensitive to the inhibition by CsA or ADP. These results suggest that Ca(2+) induces the ANT "c" conformation, apparently associated with PTP opening, but requires the CyP-D peptidyl-prolyl cis-trans isomerase activity for sustaining both effects.

Effect of unsaturated fatty acids and triglycerides from soybeans on milk fat synthesis and biohydrogenation intermediates in dairy cattle.

PubMed

Boerman, J P; Lock, A L

2014-11-01

Increased rumen unsaturated fatty acid (FA) load is a risk factor for milk fat depression. This study evaluated if increasing the amount of unsaturated FA in the diet as triglycerides or free FA affected feed intake, yield of milk and milk components, and feed efficiency. Eighteen Holstein cows (132 ± 75 d in milk) were used in a replicated 3 × 3 Latin square design. Treatments were a control (CON) diet, or 1 of 2 unsaturated FA (UFA) treatments supplemented with either soybean oil (FA present as triglycerides; TAG treatment) or soybean FA distillate (FA present as free FA; FFA treatment). The soybean oil contained a higher concentration of cis-9 C18:1 (26.0 vs. 11.8 g/100g of FA) and lower concentrations of C16:0 (9.6 vs. 15.0 g/100g of FA) and cis-9,cis-12 C18:2 (50.5 vs. 59.1g/100g of FA) than the soybean FA distillate. The soybean oil and soybean FA distillate were included in the diet at 2% dry matter (DM) to replace soyhulls in the CON diet. Treatment periods were 21 d, with the final 4 d used for sample and data collection. The corn silage- and alfalfa silage-based diets contained 23% forage neutral detergent fiber and 17% crude protein. Total dietary FA were 2.6, 4.2, and 4.3% of diet DM for CON, FFA, and TAG treatments, respectively. Total FA intake was increased 57% for UFA treatments and was similar between FFA and TAG. The intakes of individual FA were similar, with the exception of a 24 g/d lower intake of C16:0 and a 64 g/d greater intake of cis-9 C18:1 for the TAG compared with the FFA treatment. Compared with CON, the UFA treatments decreased DM intake (1.0 kg/d) but increased milk yield (2.2 kg/d) and milk lactose concentration and yield. The UFA treatments reduced milk fat concentration, averaging 3.30, 3.18, and 3.11% for CON, FFA, and TAG treatments, respectively. Yield of milk fat, milk protein, and 3.5% fat-corrected milk remained unchanged when comparing CON with the UFA treatments. No differences existed in the yield of milk or milk components between the FFA and TAG treatments. The UFA treatments increased feed efficiency (energy-corrected milk/DM intake), averaging 1.42, 1.53, and 1.48 for CON, FFA, and TAG treatments, respectively. Although milk fat yield was not affected, the UFA treatments decreased the yield of de novo (<16-carbon) synthesized FA (40 g/d) and increased the yield of preformed (>16-carbon) FA (134 g/d). Yield of FA from both sources (16-carbon FA) was reduced by the UFA treatments but to a different extent for FFA versus TAG (72 vs. 100g/d). An increase was detected in the concentration of trans-10 C18:1 and a trend for an increase in trans-10,cis-12 C18:2 and trans-9,cis-11 C18:2 for the UFA treatments compared with CON. Under the dietary conditions tested, UFA treatments supplemented at 2% diet DM as either soybean FA distillate or soybean oil increased milk yield but did not effectively cause a reduction in milk fat yield, with preformed FA replacing de novo synthesized FA in milk fat. Further research is required to determine if the response to changes in dietary free and esterified FA concentrations is different in diets that differ in their risk for milk fat depression. Copyright © 2014 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Near-IR Resonance Raman Spectroscopy of Archaerhodopsin 3: Effects of Transmembrane Potential

PubMed Central

Saint Clair, Erica C.; Ogren, John I.; Mamaev, Sergey; Russano, Daniel; Kralj, Joel M.; Rothschild, Kenneth J.

2013-01-01

Archaerhodopsin 3 (AR3) is a light driven proton pump from Halorubrum sodomense that has been used as a genetically targetable neuronal silencer and an effective fluorescent sensor of transmembrane potential. Unlike the more extensively studied bacteriorhodopsin (BR) from Halobacterium salinarum, AR3 readily incorporates into the plasma membrane of both E. coli and mammalian cells. Here, we used near-IR resonance Raman confocal microscopy to study the effects of pH and membrane potential on the AR3 retinal chromophore structure. Measurements were performed both on AR3 reconstituted into E. coli polar lipids and in vivo in E. coli expressing AR3 in the absence and presence of a negative transmembrane potential. The retinal chromophore structure of AR3 is in an all-trans configuration almost identical to BR over the entire pH range from 3–11. Small changes are detected in the retinal ethylenic stretching frequency and Schiff Base (SB) hydrogen bonding strength relative to BR which may be related to a different water structure near the SB. In the case of the AR3 mutant D95N, at neutral pH an all-trans retinal O-like species (Oall-trans) is found. At higher pH a second 13-cis retinal N-like species (N13-cis) is detected which is attributed to a slowly decaying intermediate in the red-light photocycle of D95N. However, the amount of N13-cis detected is less in E. coli cells but is restored upon addition of carbonyl cyanide m-chlorophenyl hydrazone (CCCP) or sonication, both of which dissipate the normal negative membrane potential. We postulate that these changes are due to the effect of membrane potential on the N13-cis to M13-cis levels accumulated in the D95N red-light photocycle and on a molecular level by the effects of the electric field on the protonation/deprotonation of the cytoplasmic accessible SB. This mechanism also provides a possible explanation for the observed fluorescence dependence of AR3 and other microbial rhodopsins on transmembrane potential. PMID:23189985

A step towards on-chip biochemical energy cascade of microorganisms: carbon dioxide generation induced by ethanol fermentation in 3D printed modular lab-on-a-chip

NASA Astrophysics Data System (ADS)

Podwin, A.; Kubicki, W.; Adamski, K.; Walczak, R.; Dziuban, J. A.

2016-11-01

The concept of biochemical energy cascade of microorganisms towards oxygen generation in 3D printed lab-on-a-chip has been presented. In this work, carbon dioxide - a product of ethanol fermentation of yeasts has been utilized to enable light-initialized photosynthesis of euglenas and as a result of their metabolic transitions produce pure oxygen.

Lifecourse social position and D-dimer; findings from the 1958 British birth cohort.

PubMed

Tabassum, Faiza; Kumari, Meena; Rumley, Ann; Power, Chris; Strachan, David P; Lowe, Gordon

2014-01-01

The aim is to examine the association of lifecourse socioeconomic position (SEP) on circulating levels of D-dimer. Data from the 1958 British birth cohort were used, social class was determined at three stages of respondents' life: at birth, at 23 and at 42 years. A cumulative indicator score of SEP (CIS) was calculated ranging from 0 (always in the highest social class) to 9 (always in the lowest social class). In men and women, associations were observed between CIS and D-dimer (P<0.05). Thus, the respondents in more disadvantaged social classes had elevated levels of D-dimer compared to respondents in less disadvantaged social class. In multivariate analyses, the association of disadvantaged social position with D-dimer was largely explained by fibrinogen, C-reactive protein and von Willebrand Factor in women, and additionally by smoking, alcohol consumption and physical activity in men. Socioeconomic circumstances across the lifecourse at various stages also contribute independently to raised levels of D-dimer in middle age in women only. Risk exposure related to SEP accumulates across life and contributes to raised levels of D-dimer. The association of haemostatic markers and social differences in health may be mediated by inflammatory and other markers.

Chlorinated Electron Acceptor Abundance Drives Selection of Dehalococcoides mccartyi (D. mccartyi) Strains in Dechlorinating Enrichment Cultures and Groundwater Environments

PubMed Central

Pérez-de-Mora, Alfredo; Lacourt, Anna; McMaster, Michaye L.; Liang, Xiaoming; Dworatzek, Sandra M.; Edwards, Elizabeth A.

2018-01-01

Dehalococcoides mccartyi (D. mccartyi) strains differ primarily from one another by the number and identity of the reductive dehalogenase homologous catalytic subunit A (rdhA) genes within their respective genomes. While multiple rdhA genes have been sequenced, the activity of the corresponding proteins has been identified in only a few cases. Examples include the enzymes whose substrates are groundwater contaminants such as trichloroethene (TCE), cis-dichloroethene (cDCE) and vinyl chloride (VC). The associated rdhA genes, namely tceA, bvcA, and vcrA, along with the D. mccartyi 16S rRNA gene are often used as biomarkers of growth in field samples. In this study, we monitored an additional 12 uncharacterized rdhA sequences identified in the metagenome in the mixed D. mccartyi-containing culture KB-1 to monitor population shifts in more detail. Quantitative PCR (qPCR) assays were developed for 15 D. mccartyi rdhA genes and used to measure population diversity in 11 different sub-cultures of KB-1, each enriched on different chlorinated ethenes and ethanes. The proportion of rdhA gene copies relative to D. mccartyi 16S rRNA gene copies revealed the presence of multiple distinct D. mccartyi strains in each culture, many more than the two strains inferred from 16S rRNA analysis. The specific electron acceptor amended to each culture had a major influence on the distribution of D. mccartyi strains and their associated rdhA genes. We also surveyed the abundance of rdhA genes in samples from two bioaugmented field sites (Canada and United Kingdom). Growth of the dominant D. mccartyi strain in KB-1 was detected at the United Kingdom site. At both field sites, the measurement of relative rdhA abundances revealed D. mccartyi population shifts over time as dechlorination progressed from TCE through cDCE to VC and ethene. These shifts indicate a selective pressure of the most abundant chlorinated electron acceptor, as was also observed in lab cultures. These results also suggest that reductive dechlorination at contaminated sites is brought about by multiple strains of D. mccartyi whether or not the site is bioaugmented. Understanding the driving forces behind D. mccartyi population selection and activity is improving predictability of remediation performance at chlorinated solvent contaminated sites.

Synthesis and antitumor activity of seleno- and thio-purines complexed with cis-diamminoplatinum (II).

PubMed

Maeda, M; Abiko, N; Sasaki, T

1982-02-01

cis-Diamminoplatinum (II) complexes with selenoguanine, thioguanine, 6-thioxanthine, or 6-mercaptopurine were synthesized by the reaction of stoichiometric amounts of selenopurine or thiopurine with aquated cis-dichlorodimmineplatinum (II) in slightly acidic medium, and their antitumor activity was studied against L1210 cells in mice. These compounds exhibited a medium antitumor activity with very low toxicity. The antitumor activity was dependent on the nature of the purine ligand. These complexes were very stable in various aqueous solvents at 37 degrees C for 10 d but not in the presence of mouse serum. The mechanism of the action effected by the complex is not clear. However, the slow release of an antitumor active purine from the complex, SeG-Pt (NH3)2, was observed.

STS-98 crew takes part in Multi-Equipment Interface Test.

NASA Technical Reports Server (NTRS)

2000-01-01

Inside a darkened U.S. Lab module, in the Space Station Processing Facility (SSPF), astronaut James Voss (left) joins STS-98 crew members Commander Kenneth D. Cockrell (foreground), and Pilot Mark Polansky (right) to check out equipment in the Lab. They are taking part in a Multi-Equipment Interface Test (MEIT) on this significant element of the International Space Station. Also participating in the MEIT is STS-98 Mission Specialist Thomas D. Jones (Ph.D.). Voss is assigned to mission STS-102 as part of the second crew to occupy the International Space Station. During the STS-98 mission, the crew will install the Lab on the station during a series of three space walks. The mission will provide the station with science research facilities and expand its power, life support and control capabilities. The U.S. Laboratory Module continues a long tradition of microgravity materials research, first conducted by Skylab and later Shuttle and Spacelab missions. Destiny is expected to be a major feature in future research, providing facilities for biotechnology, fluid physics, combustion, and life sciences research. The Lab is planned for launch aboard Space Shuttle Atlantis on the sixth ISS flight, currently targeted no earlier than Aug. 19, 2000.

Correlations Between Emerita analoga and Profilicollis spp. as Influenced by Environmental Factors at Ocean Beach, San Francisco CA

NASA Astrophysics Data System (ADS)

Fang, E.; Le, A.

2014-12-01

Since 2002 the Careers in Science (CiS) intern program has monitored Ocean Beach in San Francisco, California for the population of Emerita analoga (Pacific Mole Crab) as part of a partnership program with the Long-term Monitoring Program and Experiential Training for Students (LiMPETS). LiMPETS is an organization that conducts citizen science with Bay Area youth such as the CiS interns. We specifically assist in the collection of Pacific Mole Crab population statistics at Ocean Beach during the summer from June through August. The purpose of collecting Pacific Mole Crabs is to monitor Profilicollis spp. (Acanthocephalan parasites) - to which Pacific Mole Crabs serve as intermediate hosts - and to learn more about our environment as Pacific Mole Crabs are indicator species. During our collections at Ocean Beach we record size, sex, and number of individuals at specific transects. We then take a random sample from the day, return to the lab, and record their sizes, sexes, and Acanthocephalan parasite load. The results of the collection and dissections are then entered into the LiMPETS online database for scientist and researchers to use. Our project will focus on correlations relating to the data collected (Pacific Mole Crab population, parasite load, abiotic and biotic factors, et cetera).

Correlations Between Emerita analoga and Profilicollis spp. as Influenced by Environmetal Factors at Ocean Beach, San Francisco CA

NASA Astrophysics Data System (ADS)

Wright, S.; Garza, F.; Zhang, P.

2015-12-01

Since 2002 the Careers in Science (CiS) intern program has monitored Ocean Beach in San Francisco, California for the population of Emerita analoga (Pacific Mole Crab) as part of a partnership program with the Long-term Monitoring Program and Experiential Training for Students (LiMPETS). LiMPETS is an organization that conducts citizen science with Bay Area youth such as the CiS interns. We specifically assist in the collection of Pacific Mole Crab population statistics at Ocean Beach during the summer from June through August. The purpose of collecting Pacific Mole Crabs is to monitor Acanthocephalan parasites (Profilicollis spp.) - to which Pacific Mole Crabs serve as intermediate hosts - and to learn more about our environment as Pacific Mole Crabs are indicator species. During our collections at Ocean Beach we record size, sex, and number of individuals at specific transects. We then take a random sample from the day, return to the lab, and record their sizes, sexes, and Acanthocephalan parasite load. The results of the collection and dissections are then entered into the LiMPETS online database for scientist and researchers to use. Our project will focus on correlations relating to the data collected (Pacific Mole Crab population, parasite load, abiotic and biotic factors, et cetera).

Correlations Between Emerita analoga and Profilicollis spp. as Influenced by Environmental Factors at Ocean Beach, San Francisco CA

NASA Astrophysics Data System (ADS)

Ma, J. H.; Hackett, C.; Lucana, F.; Esquivel, A.

2016-12-01

Since 2002 the Careers in Science (CiS) intern program has monitored Ocean Beach in San Francisco, California for the population of Emerita analoga (Pacific Mole Crab) as part of a partnership program with the Long-term Monitoring Program and Experiential Training for Students (LiMPETS). LiMPETS is an organization that conducts citizen science with Bay Area youth such as the CiS interns. We specifically assist in the collection of Pacific Mole Crab population statistics at Ocean Beach during the summer from June through August. The purpose of collecting Pacific Mole Crabs is to monitor Profilicollis spp. (Acanthocephalan parasites) - to which Pacific Mole Crabs serve as intermediate hosts - and to learn more about our environment, as Pacific Mole Crabs are indicator species. During our collections at Ocean Beach we record size, sex, and number of individuals at specific transects. We then take a random sample from the day, return to the lab, and record their sizes, sexes, and Acanthocephalan parasite load. The results of the collection and dissections are then entered into the LiMPETS online database for scientist and researchers to use. Our project will focus on correlations relating to the data collected (Pacific Mole Crab population, parasite load, abiotic and biotic factors, et cetera).

Historical Architectural Survey of Delaware Water Gap National Recreational Area 1975. Volume 1.

DTIC Science & Technology

1975-01-01

Owner: Hazel V. Irvine (presently Blue Delft Antiques) Estimated Date: Circa 1900 Historic Name: None (Summer home for Owners of Dingman House Hotel ... Construction : 1-1/2-story, frame Foundation, stone piers Wood siding on gable ends Novelty siding on sides Roof, asphalt shingles . 2 Riverstone

The New Library, A Hybrid Organization.

ERIC Educational Resources Information Center

Waaijers, Leo

This paper discusses changes in technology in libraries over the last decade, beginning with an overview of the impact of databases, the Internet, and the World Wide Web on libraries. The integration of technology at Delft University of Technology (Netherlands) is described, including use of scanning technology, fax, and e-mail for document…

Guidelines for Engineering Teachers Concerning Educating the Engineer for Innovative and Entrepreneurial Activity.

ERIC Educational Resources Information Center

Eekels, J.

1987-01-01

Emphasizes that the concept of design is fundamental in innovation. Outlines the work of the European Society for Engineering Education-Working group on Innovation. Describes the innovation-management stream in the curriculum of the faculty of Industrial Design Engineering at Delft University of Technology, Netherlands. (CW)

Universities' Intermediary Role in the "Design for Sustainability" Field

ERIC Educational Resources Information Center

Küçüksayraç, Elif; Wever, Renee; Brezet, Han

2017-01-01

Purpose: This paper aims to investigate the intermediary role of universities in spreading design for sustainability into industry. Design/methodology/approach: Three case studies were undertaken on Delft University of Technology, Design for Sustainability Program from The Netherlands; a center on sustainable consumption and production; and Prof.…

Formation of diastereomeric benzo[a]pyrene diol epoxide-guanine adducts in p53 gene-derived DNA sequences.

PubMed

Matter, Brock; Wang, Gang; Jones, Roger; Tretyakova, Natalia

2004-06-01

G --> T transversion mutations in the p53 tumor suppressor gene are characteristic of smoking-related lung tumors, suggesting that these genetic changes may result from exposure to tobacco carcinogens. It has been previously demonstrated that the diol epoxide metabolites of bay region polycyclic aromatic hydrocarbons present in tobacco smoke, e.g., benzo[a]pyrene diol epoxide (BPDE), preferentially bind to the most frequently mutated guanine nucleotides within p53 codons 157, 158, 248, and 273 [Denissenko, M. F., Pao, A., Tang, M., and Pfeifer, G. P. (1996) Science 274, 430-432]. However, the methodology used in that work (ligation-mediated polymerase chain reaction in combination with the UvrABC endonuclease incision assay) cannot establish the chemical structures and stereochemical identities of BPDE-guanine lesions. In the present study, we employ a stable isotope-labeling HPLC-MS/MS approach [Tretyakova, N., Matter, B., Jones, R., and Shallop, A. (2002) Biochemistry 41, 9535-9544] to analyze the formation of diastereomeric N(2)-BPDE-dG lesions within double-stranded oligodeoxynucleotides representing p53 lung cancer mutational hotspots and their surrounding DNA sequences. (15)N-labeled dG was placed at defined positions within DNA duplexes containing 5-methylcytosine at all physiologically methylated sites, followed by (+/-)-anti-BPDE treatment and enzymatic hydrolysis of the adducted DNA to 2'-deoxynucleosides. Capillary HPLC-ESI(+)-MS/MS was used to establish the amounts of (-)-trans-N(2)-BPDE-dG, (+)-cis-N(2)-BPDE-dG, (-)-cis-N(2)-BPDE-dG, and (+)-trans-N(2)-BPDE-dG originating from the (15)N-labeled bases. We found that all four N(2)-BPDE-dG diastereomers were formed preferentially at the methylated CG dinucleotides, including the frequently mutated p53 codons 157, 158, 245, 248, and 273. The contributions of individual diastereomers to the total adducts number at a given site varied between 70.8 and 92.9% for (+)-trans-N(2)-BPDE-dG, 5.6 and 16.7% for (-)-trans-N(2)-BPDE-dG, 2.1 and 8.5% for (-)-cis-N(2)-BPDE-dG, and 0.5 and 8.3% for (+)-cis-N(2)-BPDE-dG. The relative yields of the minor N(2)-BPDE-dG stereoisomers were elevated at the sites of inefficient adduction, while the major (+)-trans-BPDE lesion was even more dominant at the frequently adducted sites. The introduction of 5-methyl groups at adjacent cytosine bases increased the yields of N(2)-BPDE-dG diastereomers, probably a result of favorable hydrophobic interactions between BPDE and 5-methylcytosine. The targeted formation of N(2)-BPDE-dG at (Me)CG dinucleotides within the p53 gene is consistent with the high prevalence of G --> T transversions at these sites in smoking-induced lung cancer.

Lab-on-a-brane: nanofibrous polymer membranes to recreate organ-capillary interfaces

NASA Astrophysics Data System (ADS)

Budhwani, Karim I.; Thomas, Vinoy; Sethu, Palaniappan

2016-03-01

Drug discovery is a complex and time consuming process involving significant basic research and preclinical evaluation prior to testing in patients. Preclinical studies rely extensively on animal models which often fail in human trials. Biomimetic microphysiological systems (MPS) using human cells can be a promising alternative to animal models; where critical interactions between different organ systems are recreated to provide physiologically relevant in vitro human models. Central here are blood-vessel networks, the interface controlling transport of cellular and biomolecular components between the circulating fluid and underlying tissue. Here we present a novel lab-on-a-brane (or lab-on-a-membrane) nanofluidics MPS that combines the elegance of lab-on-a-chip with the more realistic morphology of 3D fibrous tissue-engineering constructs. Our blood-vessel lab-on-a-brane effectively simulates in vivo vessel-tissue interface for evaluating transendothelial transport in various pharmacokinetic and nanomedicine applications. Attributes of our platform include (a) nanoporous barrier interface enabling transmembrane molecular transport, (b) transformation of substrate into nanofibrous 3D tissue matrix, (c) invertible-sandwich architecture, and (d) simple co-culture mechanism for endothelial and smooth muscle layers to accurately mimic arterial anatomy. Structural, mechanical, and transport characterization using scanning electron microscopy, stress/strain analysis, infrared spectroscopy, immunofluorescence, and FITC-Dextran hydraulic permeability confirm viability of this in vitro system. Thus, our lab-on-a-brane provides an effective and efficient, yet considerably inexpensive, physiologically relevant alternative for pharmacokinetic evaluation; possibly reducing animals used in preclinical testing, costs from false starts, and time-to-market. Furthermore, it can be configured in multiple simultaneous arrays for personalized and precision medicine applications and for evaluating localized and targeted therapeutic delivery.

Warfighter Effectiveness Research Center Biannual Newsletter. Volume 1, Issue 2, June 2015

DTIC Science & Technology

2015-06-01

academies involving NSA cyber attacks on their net- works. This exercise afforded a realistic, intense cyber operation for our research team to...If so, please contact Capt Aaron Celaya at aa- ron.celaya@usafa.edu or 719-333-WERC. WERC Cognitive Neuroscience Lab Supports National... Neuroscience Lab – headed by Assistant Professors Chris D’Lau- ro, Ph.D. and LCDR Brian Johnson, Ph.D. – has taken the lead on researching concus

The Role of Fixation and Visual Attention in Object Recognition.

DTIC Science & Technology

1995-01-01

computers", Technical Report, Aritificial Intelligence Lab, M.I. T., AI-Memo-915, June 1986. [29] D.P. Huttenlocher and S.Ullman, "Object Recognition Using...attention", Technical Report, Aritificial Intelligence Lab, M.I. T., AI-memo-770, Jan 1984. [35] E.Krotkov, K. Henriksen and R. Kories, "Stereo...MIT Artificial Intelligence Laboratory [ PCTBTBimON STATEMENT X \\ Afipioved tor puciic reieo*«* \\ »?*•;.., jDi*tiibutK» U»lisut»d* 19951004

Solid state fermentation with lactic acid bacteria to improve the nutritional quality of lupin and soya bean.

PubMed

Bartkiene, Elena; Krungleviciute, Vita; Juodeikiene, Grazina; Vidmantiene, Daiva; Maknickiene, Zita

2015-04-01

The ability of bacteriocin-like inhibitory substance (BLIS)-producing lactic acid bacteria (LAB) to degrade biogenic amines as well as to produce L(+) and D(-)-lactic acid during solid state fermentation (SSF) of lupin and soya bean was investigated. In addition, the protein digestibility and formation of organic acids during SSF of legume were investigated. Protein digestibility of fermented lupin and soya bean was found higher on average by 18.3% and 15.9%, respectively, compared to untreated samples. Tested LAB produced mainly L-lactic acid in soya bean and lupin (D/L ratio 0.38-0.42 and 0.35-0.54, respectively), while spontaneous fermentation gave almost equal amounts of both lactic acid isomers (D/L ratio 0.82-0.98 and 0.92, respectively). Tested LAB strains were able to degrade phenylethylamine, spermine and spermidine, whereas they were able to produce putrescine, histamine and tyramine. SSF improved lupin and soya bean protein digestibility. BLIS-producing LAB in lupin and soya bean medium produced a mixture of D- and L-lactic acid with a major excess of the latter isomer. Most toxic histamine and tyramine in fermented lupin and soya bean were found at levels lower those causing adverse health effects. Selection of biogenic amines non-producing bacteria is essential in the food industry to avoid the risk of amine formation. © 2014 Society of Chemical Industry.

Physical linkages between an offshore canyon and surf zone morphologic change

NASA Astrophysics Data System (ADS)

Hansen, Jeff E.; Raubenheimer, Britt; Elgar, Steve; List, Jeffrey H.; Lippmann, Thomas C.

2017-04-01

The causes of surf zone morphologic changes observed along a sandy beach onshore of a submarine canyon were investigated using field observations and a numerical model (Delft3D/SWAN). Numerically simulated morphologic changes using four different sediment transport formulae reproduce the temporal and spatial patterns of net cross-shore integrated (between 0 and 6.5 m water depths) accretion and erosion observed in a ˜300 m alongshore region, a few hundred meters from the canyon head. The observations and simulations indicate that the accretion or erosion results from converging or diverging alongshore currents driven primarily by breaking waves and alongshore pressure gradients. The location of convergence or divergence depends on the direction of the offshore waves that refract over the canyon, suggesting that bathymetric features on the inner shelf can have first-order effects on short-term nearshore morphologic change.

Turning the Tide: Estuaries Shaped by Channel-Shoal Interactions, Eco-engineers and Inherited Landscapes

NASA Astrophysics Data System (ADS)

Kleinhans, M. G.; Braat, L.; Leuven, J.; Baar, A. W.; van der Vegt, M.; Van Maarseveen, M. C. G.; Markies, H.; Roosendaal, C.; van Eijk, A.

2015-12-01

Estuaries exhibit correlations between inlet dimensions, tidal prism and intertidal area, but to what extent estuary planform shape and shoal patterns resulted from biomorphological processes or from inherited conditions such as coastal plain and drowned valley dimensions remains unclear. We explore the hypothesis that mud flats and vegetation as a self-formed lateral confinement have effects analogous to that of river floodplain on braided versus meandering river patterns. Here we use the Delft3D numerical model and a novel tidal flume setup, the Metronome, to create estuaries from idealized initial conditions, with and without mud supply at the fluvial boundary. Experimental mud was simulated by crushed nutshell. Both the numerical and experimental estuaries were narrower with increasing mud, and had a lower degree of channel braiding. The experimental estuaries developed meanders at the river boundary with floodplain developing on the pointbar whereas cohesionless cases were more dynamic.

The influence of wave energy and sediment transport on seagrass distribution

USGS Publications Warehouse

Stevens, Andrew W.; Lacy, Jessica R.

2012-01-01

A coupled hydrodynamic and sediment transport model (Delft3D) was used to simulate the water levels, waves, and currents associated with a seagrass (Zostera marina) landscape along a 4-km stretch of coast in Puget Sound, WA, USA. A hydroacoustic survey of seagrass percent cover and nearshore bathymetry was conducted, and sediment grain size was sampled at 53 locations. Wave energy is a primary factor controlling seagrass distribution at the site, accounting for 73% of the variability in seagrass minimum depth and 86% of the variability in percent cover along the shallow, sandy portions of the coast. A combination of numerical simulations and a conceptual model of the effect of sea-level rise on the cross-shore distribution of seagrass indicates that the area of seagrass habitat may initially increase and that wave dynamics are an important factor to consider in predicting the effect of sea-level rise on seagrass distributions in wave-exposed areas.

Effect of pH and level of concentrate in the diet on the production of biohydrogenation intermediates in a dual-flow continuous culture.

PubMed

Fuentes, M C; Calsamiglia, S; Cardozo, P W; Vlaeminck, B

2009-09-01

Milk fat depression in cows fed high-grain diets has been related to an increase in the concentration of trans-10 C(18:1) and trans-10,cis-12 conjugated linoleic acid (CLA) in milk. These fatty acids (FA) are produced as a result of the alteration in rumen biohydrogenation of dietary unsaturated FA. Because a reduction in ruminal pH is usually observed when high-concentrate diets are fed, the main cause that determines the alteration in the biohydrogenation pathways is not clear. The effect of pH (6.4 vs. 5.6) and dietary forage to concentrate ratios (F:C; 70:30 F:C vs. 30:70 F:C) on rumen microbial fermentation, effluent FA profile, and DNA concentration of bacteria involved in lipolysis and biohydrogenation processes were investigated in a continuous culture trial. The dual-flow continuous culture consisted of 2 periods of 8 d (5 d for adaptation and 3 d for sampling), with a 2 x 2 factorial arrangement of treatments. Samples from solid and liquid mixed effluents were taken for determination of total N, ammonia-N, and volatile fatty acid concentrations, and the remainder of the sample was lyophilized. Dry samples were analyzed for dry matter, ash, neutral and acid detergent fiber, FA, and purine contents. The pH 5.6 reduced organic matter and fiber digestibility, ammonia-N concentration and flow, and crude protein degradation, and increased nonammonia and dietary N flows. The pH 5.6 decreased the flow of C(18:0), trans-11 C(18:1) and cis-9, trans-11 CLA, and increased the flow of trans-10 C(18:1), C(18:2n-6), C(18:3n-3), trans-11,cis-15 C(18:2) and trans-10,cis-12 CLA in the 1 h after feeding effluent. The pH 5.6 reduced Anaerovibrio lipolytica (32.7 vs. 72.1 pg/10 ng of total DNA) and Butyrivibrio fibrisolvens vaccenic acid subgroup (588 vs. 1,394 pg/10 ng of total DNA) DNA concentrations. The high-concentrate diet increased organic matter and fiber digestibility, nonammonia and bacterial N flows, and reduced ammonia-N concentration and flow. The high-concentrate diet reduced trans-11 C(18:1) and trans-10 C(18:1), and increased C(18:2n-6), C(18:3n-3) and trans-10,cis-12 CLA proportions in the 1 h after feeding effluent. The increase observed in trans-10,cis-12 CLA proportion in the 1 h after feeding effluent due to the high-concentrate diet was smaller that that observed at pH 5.6. Results indicate that the pH is the main cause of the accumulation of trans-10 C(18:1) and trans-10, cis-12 CLA in the effluent, but the trans-10,cis-12 CLA proportion can be also affected by high levels of concentrate in the diet.

Quantitative high-performance liquid chromatographic determination of retinoids in human serum using on-line solid-phase extraction and column switching. Determination of 9-cis-retinoic acid, 13-cis-retinoic acid, all-trans-retinoic acid, 4-oxo-all-trans-retinoicacid and 4-oxo-13-cis-retinoic acid.

PubMed

Gundersen, T E; Lundanes, E; Blomhoff, R

1997-03-28

A fully automated isocratic high-performance liquid chromatographic method for the determination of 9-cis-retinoic acid, 13-cis-retinoic acid, all-trans-retinoic acid, 4-oxo-13-cis-retinoic acid and 4-oxo-all-trans-retinoic acid, has been developed using on-line solid-phase extraction and a column switching technique allowing clean-up and pre-concentration in a single step. A 500-microliter sample of serum was diluted with 750 microliters of a solution containing 20% acetonitrile and the internal standard 9,10-dimethylanthracene. About 1000 microliters of this mixture was injected on a 20 x 4.6 mm I.D. poly ether ether ketone (PEEK) pre-column with titanium frits packed with Bondapak C18, 37-53 microns, 300 A particles. Proteins and very polar compounds were washed out to waste, from the pre-column, with 0.05% trifluoroacetic acid (TFA)-acetonitrile (8.5:1.5, v/v). More than 200 aliquots of diluted serum could be injected on this pre-column before elevated back-pressure enforces replacement. Components retained on the pre-column were backflushed to the analytical column for separation and detection at 360 nm. Baseline separation was achieved using a single 250 x 4.6 mm I.D. Suplex pKb-100 column and a mobile phase containing 69:10:2:16:3 (v/v) of acetonitrile-methanol-n-butanol-2% ammonium acetate-glacial acetic acid. A total time of analysis of less than 30 min, including sample preparation, was achieved. Recoveries were in the range of 79-86%. The limit of detection was 1-7 ng/ml serum and the precision, in the concentration range 20-1000 ng/ml, was between 1.3 and 4.5% for all five compounds. The method was applied for the analysis of human serum after oral administration of 60 mg Roaccutan. The method is well suited for pharmacological studies, while the endogenous levels of some retinoic acid isomers are below the limit of quantitation.

P-MAPA immunotherapy potentiates the effect of cisplatin on serous ovarian carcinoma through targeting TLR4 signaling.

PubMed

de Almeida Chuffa, Luiz Gustavo; de Moura Ferreira, Grazielle; Lupi, Luiz Antonio; da Silva Nunes, Iseu; Fávaro, Wagner José

2018-01-17

Toll-like receptors (TLRs) are transmembrane proteins expressed on the surface of ovarian cancer (OC) and immune cells. Identifying the specific roles of the TLR-mediated signaling pathways in OC cells is important to guide new treatments. Because immunotherapies have emerged as the adjuvant treatment for patients with OC, we investigated the effect of a promising immunotherapeutic strategy based on protein aggregate magnesium-ammonium phospholinoleate-palmitoleate anhydride (P-MAPA) combined with cisplatin (CIS) on the TLR2 and TLR4 signaling pathways via myeloid differentiation factor 88 (MyD88) and TLR-associated activator of interferon (TRIF) in an in vivo model of OC. Tumors were chemically induced by a single injection of 100 μg of 7,12-dimethylbenz(a)anthracene (DMBA) directly under the left ovarian bursa in Fischer 344 rats. After the rats developed serous papillary OC, they were given P-MAPA, CIS or the combination P-MAPA+CIS as therapies. To understand the effects of the treatments, we assessed the tumor size, histopathology, and the TLR2- and TLR4-mediated inflammatory responses. Although CIS therapy was more effective than P-MAPA in reducing the tumor size, P-MAPA immunotherapy significantly increased the expressions of TLR2 and TLR4. More importantly, the combination of P-MAPA with CIS showed a greater survival rate compared to CIS alone, and exhibited a significant reduction in tumor volume compared to P-MAPA alone. The combination therapy also promoted the increase in the levels of the following OC-related proteins: TLR4, MyD88, TRIF, inhibitor of phosphorylated NF-kB alpha (p-IkBα), and nuclear factor kappa B (NF-kB p65) in both cytoplasmic and nuclear sites. While P-MAPA had no apparent effect on tumor necrosis factor alpha (TNF-α) and interleukin (IL)-6, it seems to increase interferon-γ (IFN-γ), which may induce the Thelper (Th1)-mediated immune response. Collectively, our results suggest that P-MAPA immunotherapy combined with cisplatin could be considered an important therapeutic strategy against OC cells based on signaling pathways activated by TLR4.

My Brother’s Keeper National Lab Week

NASA Image and Video Library

2016-03-02

Mike Lane demonstrates a 3D scanner inside the NASA Kennedy Space Center Prototype Lab for students in the My Brother’s Keeper program. The Florida spaceport is one of six NASA centers that participated in My Brother’s Keeper National Lab Week. The event is a nationwide effort to bring youth from underrepresented communities into federal labs and centers for hands-on activities, tours and inspirational speakers. Sixty students from the nearby cities of Orlando and Sanford visited Kennedy, where they toured the Vehicle Assembly Building, the Space Station Processing Facility and the center’s innovative Swamp Works Labs. The students also had a chance to meet and ask questions of a panel of subject matter experts from across Kennedy.

The status of the Callio Lab Underground Laboratory in the Pyhäsalmi mine

NASA Astrophysics Data System (ADS)

Joutsenvaara, Jari; Enqvist, Timo; Isoherranen, Ville; Jalas, Panu; Kutuniva, Johanna; Kuusiniemi, Pasi

2017-04-01

We present the structure and the latest technical characteristics of the Callio Lab, the new underground laboratory managing the scientific and other non-mining related operations in the Pyhäsalmi mine in Pyhäjärvi, Finland. The very deep laboratory hall space, called Lab 2 of Callio Lab, was finished in spring 2016 at the depth of 1 430 metres (4 100 m.w.e.). Callio Lab has also other easily accessible (by car or truck) halls for laboratory use, for example at the depths of 440 m, 600 m and 990 m. We also review the current and planned activities related to particle physics, applied sciences, industrial R&D and production.

AnimatLab: a 3D graphics environment for neuromechanical simulations.

PubMed

Cofer, David; Cymbalyuk, Gennady; Reid, James; Zhu, Ying; Heitler, William J; Edwards, Donald H

2010-03-30

The nervous systems of animals evolved to exert dynamic control of behavior in response to the needs of the animal and changing signals from the environment. To understand the mechanisms of dynamic control requires a means of predicting how individual neural and body elements will interact to produce the performance of the entire system. AnimatLab is a software tool that provides an approach to this problem through computer simulation. AnimatLab enables a computational model of an animal's body to be constructed from simple building blocks, situated in a virtual 3D world subject to the laws of physics, and controlled by the activity of a multicellular, multicompartment neural circuit. Sensor receptors on the body surface and inside the body respond to external and internal signals and then excite central neurons, while motor neurons activate Hill muscle models that span the joints and generate movement. AnimatLab provides a common neuromechanical simulation environment in which to construct and test models of any skeletal animal, vertebrate or invertebrate. The use of AnimatLab is demonstrated in a neuromechanical simulation of human arm flexion and the myotactic and contact-withdrawal reflexes. Copyright (c) 2010 Elsevier B.V. All rights reserved.

CYP2B6, CYP2D6, and CYP3A4 catalyze the primary oxidative metabolism of perhexiline enantiomers by human liver microsomes.

PubMed

Davies, Benjamin J; Coller, Janet K; Somogyi, Andrew A; Milne, Robert W; Sallustio, Benedetta C

2007-01-01

The cytochrome P450 (P450)-mediated 4-monohydroxylations of the individual enantiomers of the racemic antianginal agent perhexiline (PHX) were investigated in human liver microsomes (HLMs) to identify stereoselective differences in metabolism and to determine the contribution of the polymorphic enzyme CYP2D6 and other P450s to the intrinsic clearance of each enantiomer. The cis-, trans1-, and trans2-4-monohydroxylation rates of (+)- and (-)-PHX by human liver microsomes from three extensive metabolizers (EMs), two intermediate metabolizers (IMs), and two poor metabolizers (PMs) of CYP2D6 were measured with a high-performance liquid chromatography assay. P450 isoform-specific inhibitors, monoclonal antibodies directed against P450 isoforms, and recombinantly expressed human P450 enzymes were used to define the P450 isoform profile of PHX 4-monohydroxylations. The total in vitro intrinsic clearance values (mean +/- S.D.) of (+)- and (-)-PHX were 1376 +/- 330 and 2475 +/- 321, 230 +/- 225 and 482 +/- 437, and 63.4 +/- 1.6 and 54.6 +/- 1.2 microl/min/mg for the EM, IM, and PM HLMs, respectively. CYP2D6 catalyzes the formation of cis-OH-(+)-PHX and trans1-OH-(+)-PHX from (+)-PHX and cis-OH-(-)-PHX from (-)-PHX with high affinity. CYP2B6 and CYP3A4 each catalyze the trans1- and trans2-4-monohydroxylation of both (+)- and (-)-PHX with low affinity. Both enantiomers of PHX are subject to significant polymorphic metabolism by CYP2D6, although this enzyme exhibits distinct stereoselectivity with respect to the conformation of metabolites and the rate at which they are formed. CYP2B6 and CYP3A4 are minor contributors to the intrinsic P450-mediated hepatic clearance of both enantiomers of PHX, except in CYP2D6 PMs.

Towards an easier creation of three-dimensional data for embedding into scholarly 3D PDF (Portable Document Format) files

PubMed Central

2015-01-01

The Portable Document Format (PDF) allows for embedding three-dimensional (3D) models and is therefore particularly suitable to communicate respective data, especially as regards scholarly articles. The generation of the necessary model data, however, is still challenging, especially for inexperienced users. This prevents an unrestrained proliferation of 3D PDF usage in scholarly communication. This article introduces a new solution for the creation of three of types of 3D geometry (point clouds, polylines and triangle meshes), that is based on MeVisLab, a framework for biomedical image processing. This solution enables even novice users to generate the model data files without requiring programming skills and without the need for an intensive training by simply using it as a conversion tool. Advanced users can benefit from the full capability of MeVisLab to generate and export the model data as part of an overall processing chain. Although MeVisLab is primarily designed for handling biomedical image data, the new module is not restricted to this domain. It can be used for all scientific disciplines. PMID:25780759

Towards an easier creation of three-dimensional data for embedding into scholarly 3D PDF (Portable Document Format) files.

PubMed

Newe, Axel

2015-01-01

The Portable Document Format (PDF) allows for embedding three-dimensional (3D) models and is therefore particularly suitable to communicate respective data, especially as regards scholarly articles. The generation of the necessary model data, however, is still challenging, especially for inexperienced users. This prevents an unrestrained proliferation of 3D PDF usage in scholarly communication. This article introduces a new solution for the creation of three of types of 3D geometry (point clouds, polylines and triangle meshes), that is based on MeVisLab, a framework for biomedical image processing. This solution enables even novice users to generate the model data files without requiring programming skills and without the need for an intensive training by simply using it as a conversion tool. Advanced users can benefit from the full capability of MeVisLab to generate and export the model data as part of an overall processing chain. Although MeVisLab is primarily designed for handling biomedical image data, the new module is not restricted to this domain. It can be used for all scientific disciplines.

Ocean modelling and Early-Warning System for the Gulf of Thailand

NASA Astrophysics Data System (ADS)

de Lima Rego, Joao; Yan, Kun; Sisomphon, Piyamarn; Thanathanphon, Watin; Twigt, Daniel; Irazoqui Apecechea, Maialen

2017-04-01

Storm surges associated with severe tropical cyclones are among the most hazardous and damaging natural disasters to coastal areas. The Gulf of Thailand (GoT) has been periodically affected by typhoon induced storm surges in the past (e.g. storm Harriet in 1962, storm Gay in 1989 and storm Linda in 1997). Due to increased touristic / economic development and increased population density in the coastal zone, the combined effect and risk of high water level and increased rainfall / river discharge has dramatically increased and are expected to increase in future due to climate change effects. This presentation describes the development and implementation of the first real-time operational storm surge, wave and wave setup forecasting system in the GoT, a joint applied research initiative by Deltares in The Netherlands and the Hydro and Agro Informatics Institute (HAII) in Thailand. The modelling part includes a new hydrodynamic model to simulate tides and storm surges and two wave models (regional and local). The hydrodynamic model is based on Delft3D Flexible Mesh, capable of simulating water levels and detailed flows. The regional and the recently-developed local wave model are based on the SWAN model, a third-generation wave model. The operational platform is based on Delft-FEWS software, which coordinates all the data inputs, the modelling tasks and the automatic forecast exports including overland inundation in the upper Gulf of Thailand. The main objective of the Gulf of Thailand EWS is to provide daily accurate storm surge, wave and wave setup estimates automatically with various data exports possibilities to support this task. It adds a coastal component to HAII's existing practice of providing daily reports on fluvial flood forecasts, used for decision-support in issuing flood warnings for inland water systems in Thailand. Every day, three-day coastal forecasts are now produced based on the latest regional meteorological predictions. Examples are given to illustrate the system's development and main features, with a focus on decision-support products.

Pan-cancer analysis of somatic copy number alterations implicates IRS4 and IGF2 in enhancer hijacking

PubMed Central

Weischenfeldt, Joachim; Dubash, Taronish; Drainas, Alexandros P.; Mardin, Balca R.; Chen, Yuanyuan; Stütz, Adrian M.; Waszak, Sebastian M.; Bosco, Graziella; Halvorsen, Ann Rita; Raeder, Benjamin; Efthymiopoulos, Theocharis; Erkek, Serap; Siegl, Christine; Brenner, Hermann; Brustugun, Odd Terje; Dieter, Sebastian M.; Northcott, Paul A.; Petersen, Iver; Pfister, Stefan M.; Schneider, Martin; Solberg, Steinar K.; Thunissen, Erik; Weichert, Wilko; Zichner, Thomas; Thomas, Roman; Peifer, Martin; Helland, Aslaug; Ball, Claudia R.; Jechlinger, Martin; Sotillo, Rocio; Glimm, Hanno; Korbel, Jan O.

2018-01-01

Extensive prior research has focused on somatic copy-number alterations (SCNAs) affecting cancer genes, yet the extent to which recurrent SCNAs exert their influence through rearranging cis-regulatory elements remains unclear. Here, we present a framework for inferring cancer-related gene overexpression resulting from cis-regulatory element reorganization (e.g., enhancer hijacking), by integrating SCNAs, gene expression data, and information on chromatin interaction domains. Analysis of 7,416 cancer genomes uncovered several pan-cancer candidate genes, including IRS4, SMARCA1 and TERT. We demonstrate that IRS4 overexpression in lung cancer associates with recurrent deletions in cis, and present evidence supporting a tumor-promoting role. We additionally pursued cancer type-specific analyses, uncovering IGF2 as a target for enhancer hijacking in colorectal cancer. IGF2-containing tandem duplications result in the de novo formation of a 3D contact domain comprising IGF2 and a lineage-specific super-enhancer, which mediates high-level gene activation. Our framework enables systematic inference of cis-regulatory element rearrangements mediating dysregulation in cancer. PMID:27869826

Photoisomerization of Stilbene: The Detailed XMCQDPT2 Treatment.

PubMed

Ioffe, I N; Granovsky, A A

2013-11-12

We report the detailed XMCQDPT2/cc-pVTZ study of trans-cis photoisomerization in one of the core systems of both experimental and computational photochemistry-the stilbene molecule. For the first time, the potential energy surface (PES) of the S1 state has been directly optimized and scanned using a multistate multiconfiguration second-order perturbation theory. We characterize the trans-stilbene, pyramidalized (phantom), and DHP-cis-stilbene geometric domains of the S1 state and describe their stationary points including the transition states between them, as well as S1/S0 intersections. Also reported are the minima and the activation barriers in the ground state. Our calculations correctly predict the kinetic isotope effect due to H/D exchange at ethylenic hydrogens, the dynamic behavior of excited cis-stilbene, and trans-cis branching ratio after relaxation to S0 through a rather unsymmetric conical intersection. In general, the XMCQDPT2 results confirm the qualitative adequacy of the TDDFT (especially SF-TDDFT) picture of the excited stilbene but also reveal quantitative discrepancies that deserve further exploration.

Characterization of a BETA-Catenin-Associated Kinase

DTIC Science & Technology

1999-08-01

and the chambers removed. The cells were mounted with Vectashield (Vector Labs , Inc.). Antibodies The anti-ß-catenin (C19220) and anti-p27 (K25020...anti- HA mAb was purchased from Boehringer Mannheim Corp. (#186723). The anti-E-cadherin (SHE78-7) mAb was purchased from Zymed Labs , Inc...600. van de Wetering, M., R. Cavallo, D. Dooijes, M. van Beest , J. van Es, J. Louri- ero, A. Ypma, D. Hursh, T. Jones, A. Bejsovec, et al. 1997

Mobile Applications and Multi-User Virtual Reality Simulations

NASA Technical Reports Server (NTRS)

Gordillo, Orlando Enrique

2016-01-01

This is my third internship with NASA and my second one at the Johnson Space Center. I work within the engineering directorate in ER7 (Software Robotics and Simulations Division) at a graphics lab called IGOAL. We are a very well-rounded lab because we have dedicated software developers and dedicated 3D artist, and when you combine the two, what you get is the ability to create many different things such as interactive simulations, 3D models, animations, and mobile applications.

Crack Velocities in Natural Rubber.

DTIC Science & Technology

1982-05-01

vulcanized natural rubber (3). The surprisingly low value for natural rubber was attributed to highly anisotropic elastic behavior at high strains...Dr. R.L. Rabie Hercules Incorporated WX-2, MS-952 Alleghany Ballistic Lab Los Alamos National Lab. P.O. Box 210 P.O. Box 1663 Washington, D.C. 21502

Research Directory for Manpower, Personnel, Training, and Human Factors.

DTIC Science & Technology

1991-01-01

Enhance Automatic Recognition of Speech in Noisy, Highly Stressful Environments Cofod R* Lica Systems Inc 703-359-0996 Smart Contract Preparation...Lab 301-278-2946 Smart Contract Preparation Expediter Frezell T LTCOL Human Engineering Lab 301-278-5998 Impulse Noise Hazard Information Processing R&D

Resistor Susceptibility Survey

DTIC Science & Technology

1976-11-01

SATIN IV ATTN: DCKE, L. Staples ATTN. YWES ATTN XRE-Surv. ATTN- MCAE, Lt Col Sparks ATTN: XRP , Maj Gingrich Sandia Lab. ATTN 3141 ATTN E...Diamond Lab. ATTN: Lib. HQ USAF ATTN: XOOWD AFSC Tech. Lib. ATTN: DLCAW ATTN: XRP ! Sperry Rand Fit. Sys. Div. ATTN: Tech. Lib. ATTN: D

Commerce Lab - An enabling facility and test bed for commercial flight opportunities

NASA Technical Reports Server (NTRS)

Robertson, Jack; Atkins, Harry L.; Williams, John R.

1986-01-01

Commerce Lab is conceived as an adjunct to the National Space Transportation System (NSTS) by providing a focal point for commercial missions which could utilize existing NSTS carrier and resource capabilities for on-orbit experimentation in the microgravity sciences. In this context, the Commerce Lab provides an enabling facility and test bed for commercial flight opportunities. Commerce Lab program activities to date have focused on mission planning for private sector involvement in the space program to facilitate the commercial exploitation of the microgravity environment for materials processing research and development. It is expected that Commerce Lab will provide a logical transition between currently planned NSTS missions and future microgravity science and commercial R&D missions centered around the Space Station. The present study identifies candidate Commerce Lab flight experiments and their development status and projects a mission traffic model that can be used in commercial mission planning.

Going Dutch: Higher Education in the Netherlands

ERIC Educational Resources Information Center

Law, David

2016-01-01

This article outlines some of the policy issues currently faced by research-based universities in the Netherlands. The focus is on four leading universities (University of Amsterdam: UvA; Free University of Amsterdam: VU; Leiden University; and Delft University of Technology: TUD). The author visited these institutions as part of a Study Tour…

Behavior of Escherichia coli O157:H7 and Listeria monocytogenes during fermentation and storage of camel yogurt.

PubMed

Al-Nabulsi, Anas A; Olaimat, Amin N; Osaili, Tareq M; Ayyash, Mutamed M; Abushelaibi, Aisha; Jaradat, Ziad W; Shaker, Reyad; Al-Taani, Mahmoud; Holley, Richard A

2016-03-01

In addition to its nutritional and therapeutic properties, camel milk has the ability to suppress the growth of a wide range of foodborne pathogens, but there is a lack of information regarding the behavior of these pathogens in products such as yogurt produced from camel milk. The objective of the current study was to investigate the behavior of Listeria monocytogenes and Escherichia coli O157:H7 during manufacture and storage of camel yogurt. Camel milk inoculated with L. monocytogenes and E. coli O157:H7 was fermented at 43° C for 5h using freeze-dried lactic acid bacteria (LAB) starter cultures (Streptococcus thermophilus and Lactobacillus bulgaricus) and stored at 4 or 10 °C for 14 d. Camel milk inoculated with L. monocytogenes and E. coli O157:H7 without starter culture was also prepared. During fermentation, the numbers of L. monocytogenes and E. coli O157:H7 increased 0.3 and 1.6 log cfu/mL, respectively, in the presence of LAB, and by 0.3 and 2.7 log cfu/mL in the absence of LAB. During storage at 4 or 10 °C, L. monocytogenes increased 0.8 to 1.2 log cfu/mL by 14 d in camel milk without LAB, but in the presence of LAB, the numbers of L. monocytogenes were reduced by 1.2 to 1.7 log cfu/mL by 14 d. Further, E. coli O157:H7 numbers in camel milk were reduced by 3.4 to 3.5 log cfu/mL in the absence of LAB, but E. coli O157:H7 was not detected (6.3 log cfu/mL reduction) by 7d in camel yogurt made with LAB and stored at either temperature. Although camel milk contains high concentrations of natural antimicrobials, L. monocytogenes was able to tolerate these compounds in camel yogurt stored at refrigerator temperatures. Therefore, appropriate care should be taken during production of yogurt from camel milk to minimize the potential for postprocess contamination by this and other foodborne pathogens. Copyright © 2016 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Installation Restoration Program. Site Investigation Report. Volume 4. 152nd Tactical Reconnaissance Group, Nevada Air National Guard, Reno Cannon International Airport, Reno, Nevada

DTIC Science & Technology

1994-04-01

1597 SDG LA3 ID KaMBER COmOVouD lZXP PORN SP 443 m/m 442 u/x CALC LAB CALC LIMIT RLAIz R3LATrVZ 0 AD= I AIDO ERROR -BU AWN 1 1545 DF930308A21 DFTPP...1597 SAWPLZ SAM) E 0 CONPOUUD SPIKU 8 ANPLZ NATRIX M HD 15 mm M I0 MI D CAL APC NUMIER TYPE ADDED RESULT SPIKE t 1EA t VRI RPD VWi 1566 1545 1,4-DICKL...1597 E1DO LAB ID XMNDI CONPOUND ZXP PORN EPZC1176 u/s 1174 u/u CALC LAB CALC ILIMIT RELATIVE RELATIVE I ABUN I £303 ERROR 1545 B7930307356 3PB y y

Antifungal activity of Lactobacillus fermentum Te007, Pediococcus pentosaceus Te010, Lactobacillus pentosus G004, and L. paracasi D5 on selected foods.

PubMed

Muhialdin, Belal J; Hassan, Zaiton; Sadon, Sajaa Kh

2011-09-01

In the search for new preservatives from natural resources to replace or to reduce the use of chemical preservatives 4 strains of lactic acid bacteria (LAB) were selected to be evaluated for their antifungal activity on selected foods. The supernatants of the selected strains delayed the growth of fungi for 23 to 40 d at 4 °C and 5 to 6 d at 20 and 30 °C in tomato puree, 19 to 29 d at 4 °C and 6 to 12 d at 20 and 30 °C in processed cheese, and 27 to 30 d at 4 °C and 12 to 24 d at 20 and 30 °C in commercial bread. The shelf life of bread with added LAB cells or their supernatants were longer than normal bread. This study demonstrates that Lactobacillus fermentum Te007, Pediococcus pentosaceus Te010, L. pentosus G004, and L. paracasi D5 either the cells or their supernatants could be used as biopreservative in bakery products and other processed foods. The heat stability nature of the antifungal compounds produced by the LAB isolates offers a promising application of L. fermentum Te007, P. pentosaceus Te010, L. pentosus G004, and L. paracasi D5 as biopreservative in bakery products or other processed foods to replace or reduce the use of chemical preservatives. © 2011 Institute of Food Technologists®

Commerce Lab - A program of commercial flight opportunities

NASA Technical Reports Server (NTRS)

Robertson, J.; Atkins, H. L.; Williams, J. R.

1985-01-01

Commerce Lab is conceived as an adjunct to the National Space Transportation System (NSTS) by providing a focal point for commercial missions which could utilize existing NSTS carrier and resource capabilities for on-orbit experimentation in the microgravity sciences. In this context, the Commerce Lab program provides mission planning for private sector involvement in the space program, in general, and the commercial exploitation of the microgravity environment for materials processing research and development. It is expected that Commerce Lab will provide a logical transition between currently planned NSTS missions and future microgravity science and commercial R&D missions centered around the Space Station. The present study identifies candidate Commerce Lab flight experiments and their development status and projects a mission traffic model that can be used in commercial mission planning.

Systematic review and meta-analysis of Spanish studies regarding the association between maternal 25-hydroxyvitamin D levels and perinatal outcomes.

PubMed

Martínez-Domínguez, Samuel J; Tajada, Mauricio; Chedraui, Peter; Pérez-López, Faustino R

2018-05-29

This systematic review and meta-analysis of Spanish studies assessed the association of maternal 25-hydroxyvitamin D [25(OH)D] levels on perinatal outcomes. PubMed, Cochrane Library, Embase, Scielo, Scopus, and Web of Science research databases were searched from inception through December 30 2017 using the terms 'vitamin D', 'pregnancy', and 'Spain'. Studies that compared first or second half of pregnancy normal 25(OH)D (≥30.0 ng/mL) versus insufficient (20.0-29.9 ng/mL) or deficient (<20.0 ng/mL) circulating levels and perinatal outcomes were systematically extracted. Data are presented as pooled odds ratios and their 95% confidence intervals (CIs) for categorical variables or mean differences and CIs for continuous variables. Risk of bias was evaluated with the Newcastle-Ottawa Scale. Five cohort studies met inclusion criteria. The risk of gestational diabetes mellitus, preeclampsia, preterm birth, and small-for-gestational-age infants, and birthweight was not influenced by first half of pregnancy maternal 25(OH)D levels. In addition, second half of pregnancy 25(OH) levels did not affect birthweight. Maternal 25(OH)D levels during pregnancy did not affect studied perinatal outcomes and birthweight.

Berkeley Lab Wins Seven 2015 R&D 100 Awards | Berkeley Lab

Science.gov Websites

products from industry, academia, and government-sponsored research, ranging from chemistry to materials to problems in metrology techniques: the quantitative characterization of the imaging instrumentation Computational Research Division led the development of the technology. Sensor Integrated with Recombinant and

Evaluation of a New Fracture Toughness Measuring Technique, and Adaptation of the Technique to Use Ultra-Small Specimens

DTIC Science & Technology

1979-09-01

University of Michigan, 2046 East Engineering, Ann Arbor, Michigan 48109 1 Dr. R.Foye, Army Research and Technology Lab, Air Movility R&D Lab, Ames Research Center, Moffett Field, California 94035 fI nu l nmIl l l l l

Science Labs: Beyond Isolationism

ERIC Educational Resources Information Center

Cavanagh, Sean

2007-01-01

A national study released in 2005 concluded that most high school students are not exposed to high quality science labs because of these reasons: (a) poor school facilities and organizations; (b) weak teacher preparation; (c) poor design; (d) cluttered state standards; (e) little representation on state tests; and (f) scarce evidence of what…

360 Video Tour of 3D Printing Labs at LLNL

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

Additive manufacturing is changing the way the world thinks about manufacturing and design. And here at Lawrence Livermore National Laboratory, it’s changing the way our scientists approach research and development. Today we’ll look around three of the additive manufacturing research labs on the Lawrence Livermore campus.

STS-98 crew takes part in Multi-Equipment Interface Test.

NASA Technical Reports Server (NTRS)

2000-01-01

Members of the STS-98 crew check out equipment in the U.S. Lab Destiny during a Multi-Equipment Interface Test. During the mission, the crew will install the Lab in the International Space Station during a series of three space walks. The STS-98 mission will provide the station with science research facilities and expand its power, life support and control capabilities. The U.S. Laboratory Module continues a long tradition of microgravity materials research, first conducted by Skylab and later Shuttle and Spacelab missions. Destiny is expected to be a major feature in future research, providing facilities for biotechnology, fluid physics, combustion, and life sciences research. Making up the five-member crew on STS-98 are Commander Kenneth D. Cockrell, Pilot Mark L. Polansky, and Mission Specialists Robert L. Curbeam Jr., Thomas D. Jones (Ph.D.) and Marsha S. Ivins. The Lab is planned for launch aboard Space Shuttle Atlantis on the sixth ISS flight, currently targeted no earlier than Aug. 19, 2000.

STS-98 crew takes part in Multi-Equipment Interface Test.

NASA Technical Reports Server (NTRS)

2000-01-01

In the Space Station Processing Facility, STS-98 Mission Specialist Thomas D. Jones (Ph.D.) gets a closeup view of the cover on the window of the U.S. Lab Destiny. Along with Commander Kenneth D. Cockrell and Pilot Mark Polansky, Jones is taking part in a Multi-Equipment Interface Test (MEIT) on this significant element of the International Space Station. During the STS-98 mission, the crew will install the Lab on the station during a series of three space walks. The mission will provide the station with science research facilities and expand its power, life support and control capabilities. The U.S. Laboratory Module continues a long tradition of microgravity materials research, first conducted by Skylab and later Shuttle and Spacelab missions. Destiny is expected to be a major feature in future research, providing facilities for biotechnology, fluid physics, combustion, and life sciences research. The Lab is planned for launch aboard Space Shuttle Atlantis on the sixth ISS flight, currently targeted no earlier than Aug. 19, 2000.

STS-98 crew takes part in Multi-Equipment Interface Test.

NASA Technical Reports Server (NTRS)

2000-01-01

STS-98 Commander Kenneth D. Cockrell (left) and Mission Specialist Thomas D. Jones (Ph.D.) check out equipment in the U.S. Lab Destiny during a Multi-Equipment Interface Test. During the mission, Jones will help install the Lab on the International Space Station in a series of three space walks. The STS-98 mission will provide the station with science research facilities and expand its power, life support and control capabilities. The U.S. Laboratory Module continues a long tradition of microgravity materials research, first conducted by Skylab and later Shuttle and Spacelab missions. Destiny is expected to be a major feature in future research, providing facilities for biotechnology, fluid physics, combustion, and life sciences research. Others in the five-member crew on STS-98 are Pilot Mark L. Polansky, and Mission Specialists Robert L. Curbeam Jr. and Marsha S. Ivins. The Lab is planned for launch aboard Space Shuttle Atlantis on the sixth ISS flight, currently targeted no earlier than Aug. 19, 2000.

Quantitative determination of phenolic compounds by UHPLC-UV-MS and use of principal component analysis to differentiate chemo-types of chamomile/chrysanthemum flowerheads

USDA-ARS?s Scientific Manuscript database

A new rapid UHPLC-UV-QTOF/MS method has been developed for the simultaneous analysis of nine phenolic compounds [cis-GMCA, chlorogenic acid, trans-GMCA, quercetagetin-7-O-ß-D-glucopyranoside, luteolin-7-O-ß-D-glucoside, apigenin-7-O- ß-Dglucoside, chamaemeloside, apigenin 7-O-(6"-O-acetyl-ß-D-glucop...

Supercritical fluid extraction of 13-cis retinoic acid and its photoisomers from selected pharmaceutical dosage forms.

PubMed

Simmons, B R; Chukwumerije, O; Stewart, J T

1997-11-01

13-Cis retinoic acid (Accutane) was extracted from a cream, gel, capsule and beadlet dosage from using supercritical carbon dioxide modified with 5% methanol as the mobile phase. The pump pressure and the extraction chamber and restrictor temperature were experimentally optimized at 325 atm and 45 degrees C, respectively. A 2.5-min static and 5-min dynamic extraction time were used. The supercritical fluid extraction (SFE) eluent was trapped in methanol, injected into the high-performance liquid chromatographic (HPLC) system, and quantitated by ultraviolet detection at 360 nm. Application of the SFE method to spiked placebo dosage forms gave 13-cis retinoic acid recoveries of 98.8, 98.9, 98.8 and 100% for the cream, gel, capsule and beadlet, respectively, with R.S.D.s in the range 0.6-0.9% (n = 4). Inter-day percent error and precision of the extraction were 1.1-2.0 and 0.2-2.4% (n = 3), respectively, and intra-day percent error and precision were 1.0-3.0 and 0.3-2.1% (n = 8), respectively. Percent error and precision data for spiked celite samples in the 0.05-1.0 microgram ml-1 range were 0.59-4.75 and 1.8-2.1% (n = 3), respectively. The extraction method was applied to commercial 13-cis retinoic acid dosage forms and the results compared to unextracted samples. Linear regression analysis of concentration versus peak height gave a correlation coefficient of 0.9991 with a slope of 7.468 and a y-intercept of 0.1923. The percent error and precision data were 1.3-5.3 and 0.2-1.5% (n = 4), respectively. The photoisomers of 13-cis retinoic acid were also extracted with the method and recoveries of 90.4-92.4% with R.S.D.s of 1.5-3.4% were obtained (n = 4).

Cluster Ion Spectrometry (CIS) Data Archiving in the CAA

NASA Astrophysics Data System (ADS)

Dandouras, I. S.; Barthe, A.; Penou, E.; Brunato, S.; Reme, H.; Kistler, L. M.; Blagau, A.; Facsko, G.; Kronberg, E.; Laakso, H. E.

2009-12-01

The Cluster Active Archive (CAA) aims at preserving the four Cluster spacecraft data, so that they are usable in the long-term by the scientific community as well as by the instrument team PIs and Co-Is. This implies that the data are filed together with the descriptive and documentary elements making it possible to select and interpret them. The CIS (Cluster Ion Spectrometry) experiment is a comprehensive ionic plasma spectrometry package onboard the four Cluster spacecraft, capable of obtaining full three-dimensional ion distributions (about 0 to 40 keV/e) with a time resolution of one spacecraft spin (4 sec) and with mass-per-charge composition determination. The CIS package consists of two different instruments, a Hot Ion Analyser (HIA) and a time-of-flight ion Composition Distribution Function (CODIF) analyser. For the archival of the CIS data a multi-level approach has been adopted. The CAA archival includes processed raw data (Level 1 data), moments of the ion distribution functions (Level 2 data), and calibrated high-resolution data in a variety of physical units (Level 3 data). The latter are 3-D ion distribution functions and 2-D pitch-angle distributions. In addition, a software package has been developed to allow the CAA user to interactively calculate partial or total moments of the ion distributions. Instrument cross-calibration has been an important activity in preparing the data for archival. The CIS data archive includes also experiment documentation, graphical products for browsing through the data, and data caveats. In addition, data quality indexes are under preparation, to help the user. Given the complexity of an ion spectrometer, and the variety of its operational modes, each one being optimised for a different magnetospheric region or measurement objective, consultation of the data caveats by the end user will always be a necessary step in the data analysis.

Solution of D dimensional Dirac equation for hyperbolic tangent potential using NU method and its application in material properties

DOE Office of Scientific and Technical Information (OSTI.GOV)

Suparmi, A., E-mail: soeparmi@staff.uns.ac.id; Cari, C., E-mail: cari@staff.uns.ac.id; Pratiwi, B. N., E-mail: namakubetanurpratiwi@gmail.com

2016-02-08

The analytical solution of D-dimensional Dirac equation for hyperbolic tangent potential is investigated using Nikiforov-Uvarov method. In the case of spin symmetry the D dimensional Dirac equation reduces to the D dimensional Schrodinger equation. The D dimensional relativistic energy spectra are obtained from D dimensional relativistic energy eigen value equation by using Mat Lab software. The corresponding D dimensional radial wave functions are formulated in the form of generalized Jacobi polynomials. The thermodynamically properties of materials are generated from the non-relativistic energy eigen-values in the classical limit. In the non-relativistic limit, the relativistic energy equation reduces to the non-relativistic energy.more » The thermal quantities of the system, partition function and specific heat, are expressed in terms of error function and imaginary error function which are numerically calculated using Mat Lab software.« less

Open Labware: 3-D Printing Your Own Lab Equipment

PubMed Central

Baden, Tom; Chagas, Andre Maia; Gage, Greg; Marzullo, Timothy; Prieto-Godino, Lucia L.; Euler, Thomas

2015-01-01

The introduction of affordable, consumer-oriented 3-D printers is a milestone in the current “maker movement,” which has been heralded as the next industrial revolution. Combined with free and open sharing of detailed design blueprints and accessible development tools, rapid prototypes of complex products can now be assembled in one’s own garage—a game-changer reminiscent of the early days of personal computing. At the same time, 3-D printing has also allowed the scientific and engineering community to build the “little things” that help a lab get up and running much faster and easier than ever before. PMID:25794301

Protein and energy metabolism of young male Wistar rats fed conjugated linoleic acid as structured triacylglycerol.

PubMed

Jørgensen, Henry; Hansen, Christina Hørup; Mu, Huiling; Jakobsen, Kirsten

2010-08-01

Twelve 4-week-old male Wistar rats weighing 100 g were fed diets semi-ad libitum for 22 d containing either 1.5% conjugated linoleic acid (CLA-diet) or high oleic sunflower oil (Control-diet). The CLA was structured triacylglycerol with predominantly cis-9, trans-11 and trans-10, cis-12 fatty acid isomers in the inner position and oleic acid in the other positions of the glycerol molecule. The rats were kept individually in metabolic cages. From days 8-16 energy, nitrogen (N) and carbon (C) balances as well as gas exchange measurements in open-air circuit respiration chambers were performed. CLA had no significant influence on feed intake, daily gain in weight or feed conversion efficiency, but the digestibility of nutrients and energy was significantly reduced (except for fat). CLA did not affect N-balance, but reduced the level of daily retained fat (RQ-method: 0.107 vs. 0.417 g/d, p < 0.01) and consequently energy retention in fat. This was explained by increased heat production (HP, RQ-method: 224.6 vs. 214.6 kJ/d, p < 0.001) caused by a higher fat oxidation (28.9% vs. 22.3%, p < 0.001) at the expense of oxidation of carbohydrates (65.6% vs. 71.4%, p < 0.001), while there was no significant effect on the oxidation of protein (5.5% vs. 6.3%). Consequently, the non-protein respiratory quotient (RQnp) was lower in the rats fed the CLA-diet than in the rats fed the Control-diet (0.907 vs. 0.928, p < 0.001). Plasma total lipids of the CLA-fed rats had higher concentrations of the cis-9, trans-11 than the trans-10, cis-12 CLA-isomer. This study shows that young male Wistar rats respond to CLA fed as structured triacylglycerol.

Quality of Life and Performance Status From a Substudy Conducted Within a Prospective Phase 3 Randomized Trial of Concurrent Accelerated Radiation Plus Cisplatin With or Without Cetuximab for Locally Advanced Head and Neck Carcinoma: NRG Oncology Radiation Therapy Oncology Group 0522.

PubMed

Truong, Minh Tam; Zhang, Qiang; Rosenthal, David I; List, Marcie; Axelrod, Rita; Sherman, Eric; Weber, Randal; Nguyen-Tân, Phuc Felix; El-Naggar, Adel; Konski, André; Galvin, James; Schwartz, David; Trotti, Andy; Silverman, Craig; Singh, Anurag; Godette, Karen; Bonner, James A; Jones, Christopher U; Garden, Adam S; Shenouda, George; Matthiesen, Chance; Le, Quynh-Thu; Bruner, Deborah

2017-03-15

To analyze the quality of life (QOL) and performance status (PS) (secondary outcome) in patients with stage III to IV head and neck cancer (HNC) enrolled on a prospective randomized phase 3 trial comparing radiation-cisplatin without cetuximab (CIS) or with cetuximab (CET/CIS). The QOL hypothesis proposed a between-arm difference in Functional Assessment of Cancer Therapy-Head and Neck (FACT-HN) total score of ≥10% of the instrument range from baseline to 1 year. Patients who gave consent to the QOL/PS study completed the FACT-HN, Performance Status Scale for HNC (PSS-HN), and EuroQol (EQ-5D) at baseline through to 5 years. The pretreatment QOL/PS scores were correlated with outcome and p16 status in patients with oropharyngeal cancer (OPC). Of 818 analyzable patients, the 1-year change from baseline score for FACT-HN total was -0.41 (CIS arm) and -5.11 (CET/CIS arm) (P=.016), representing a 3.2% between-arm change of the FACT-HN total score. The mean EQ-5D index and PSS-HN scores were not significantly different between arms. The p16-positive OPC patients had significantly higher baseline and 1-year scores for PSS-HN, FACT-HN total, physical and functional subscales, and 2-years for the EQ-5D index compared with p16-negative OPC patients. Higher pretreatment PSS-HN diet, PSS-HN eating, FACT-HN, and EQ-5D index scores were associated with better overall survival (OS) and progression-free (PFS) survival on multivariate analysis. Higher baseline FACT-HN total, functional, physical subscale, and EQ-5D index scores were associated with improved OS and PFS in p16-positive OPC patients but not in p16-negative and non-OPC patients. There was no clinically meaningful difference in QOL/PS between arms. The p16-positive OPC patients had significantly higher QOL/PS than did p16-negative patients. Pretreatment QOL/PS is a significant independent predictor of outcome in locally advanced HNC. Copyright © 2016 Elsevier Inc. All rights reserved.

Theoretical studies of the reaction dynamics of the matrix-isolated F2+cis-d2 -ethylene system

NASA Astrophysics Data System (ADS)

Raff, Lionel M.

1991-12-01

The molecular dynamics of the F2+cis-d2 -ethylene addition reaction and the subsequent decomposition dynamics of the vibrationally excited 1,2-difluoroethane-d2 product isolated in Ar or Xe matrices at 12 K are investigated using trajectory methods that incorporate nonstatistical sampling to enhance the reaction probabilities. The matrix is represented by a face-centered-cubic crystal containing 125 unit cells with 666 lattice atoms in a cubic (5×5×5) arrangement. Both interstitial and substitutional sites for the F2/cis-d2 -ethylene pair are examined. Transport effects of the bulk are simulated using the velocity reset method introduced by Riley, Coltrin, and Diestler [J. Chem. Phys. 88, 5934 (1988)]. The potential-energy hypersurface for the system is written as the separable sum of a lattice potential, a lattice-substrate interaction, and a gas-phase potential for 1,2-difluoroethane-d2. The first two of these have pairwise form, while the 1,2-difluoroethane-d2 potential is identical to that employed previously to study the unimolecular reaction dynamics of matrix-isolated 1,2-difluoroethane-d4 [J. Chem. Phys. 93, 3160 (1990)]. The major F2+cis-d2 -ethylene reaction mechanism involves a four-center, concerted αβ addition across the C=C double bond. A small contribution from an atomic addition mechanism that initially forms fluoroethyl and fluorine radicals is observed in a xenon matrix, but not in argon. Subsequent to the formation of 1,2-difluoroethane-d2, the observed dynamic processes are vibrational relaxation to the lattice phonon modes, orientational exchange, and HF or DF elimination reactions. Vibrational relaxation is found to be very similar to that observed previously for 1,2-difluoroethane-d4. The process is well described by a first-order rate law with rate coefficients in the range 0.046-0.069 ps-1. The distribution of rate coefficients, as well as the averages, are nearly identical for Ar and Xe lattices. Very little difference is found between the relaxation rates for 1,2-difluoroethane-d2 and those for the HF(DF)+fluoroethylene products. The propensity for 1,2-difluoroethane-d2 to undergo orientational exchange increases as the available free space in the lattice decreases. Thus, it is a more important process in Ar than in Xe matrices. For the same reason, it occurs with greater frequency when the reactants are in an interstitial site than when they are substitutionally held. The probability of HF or DF elimination increases as the available free space in the matrix cage decreases. The relaxation rates show that this effect is not the result of different energy transfer rates. At least five distinct mechanisms play a role in HF and DF elimination reactions in the face-centered-cubic lattice. These are, in order of importance (a) αβ addition followed by syn elimination; (b) hydrogen- or deuterium-atom transfer to fluorine on the adjacent carbon followed by a protracted delay prior to C-F bond rupture; (c) rotation about the C=C double bond in the fluoroethylene product; (d) reversible hydrogen- or deuterium-atom transfer; and (e) atom addition with intervening delay. The computed elimination yield ratios between matrices are in good agreement with the experimental values. The calculated cis/trans ratio of fluoroethylenes formed subsequent to HF elimination in Ar are a factor of 2.7 lower than those observed in the experiments. The stabilization ratios are much larger than the experimental values. These results are interpreted to mean that the experimental matrix environment is more open and spacious than that for the crystal structure used in the calculations.

Hepatitis C virus NS5A protein is a substrate for the peptidyl-prolyl cis/trans isomerase activity of cyclophilins A and B.

PubMed

Hanoulle, Xavier; Badillo, Aurélie; Wieruszeski, Jean-Michel; Verdegem, Dries; Landrieu, Isabelle; Bartenschlager, Ralf; Penin, François; Lippens, Guy

2009-05-15

We report here a biochemical and structural characterization of domain 2 of the nonstructural 5A protein (NS5A) from the JFH1 Hepatitis C virus strain and its interactions with cyclophilins A and B (CypA and CypB). Gel filtration chromatography, circular dichroism spectroscopy, and finally NMR spectroscopy all indicate the natively unfolded nature of this NS5A-D2 domain. Because mutations in this domain have been linked to cyclosporin A resistance, we used NMR spectroscopy to investigate potential interactions between NS5A-D2 and cellular CypA and CypB. We observed a direct molecular interaction between NS5A-D2 and both cyclophilins. The interaction surface on the cyclophilins corresponds to their active site, whereas on NS5A-D2, it proved to be distributed over the many proline residues of the domain. NMR heteronuclear exchange spectroscopy yielded direct evidence that many proline residues in NS5A-D2 form a valid substrate for the enzymatic peptidyl-prolyl cis/trans isomerase (PPIase) activity of CypA and CypB.

Refining Southern California Geotherms Using Seismologic, Geologic, and Petrologic Constraints

NASA Astrophysics Data System (ADS)

Thatcher, W. R.; Chapman, D. S.; Allam, A. A.; Williams, C. F.

2017-12-01

Lithospheric deformation in tectonically active regions depends on the 3D distribution of rheology, which is in turn critically controlled by temperature. Under the auspices of the Southern California Earthquake Center (SCEC) we are developing a 3D Community Thermal Model (CTM) to constrain rheology and so better understand deformation processes within this complex but densely monitored and relatively well-understood region. The San Andreas transform system has sliced southern California into distinct blocks, each with characteristic lithologies, seismic velocities and thermal structures. Guided by the geometry of these blocks we use more than 250 surface heat-flow measurements to define 13 geographically distinct heat flow regions (HFRs). Model geotherms within each HFR are constrained by averages and variances of surface heat flow q0 and the 1D depth distribution of thermal conductivity (k) and radiogenic heat production (A), which are strongly dependent on rock type. Crustal lithologies are not always well known and we turn to seismic imaging for help. We interrogate the SCEC Community Velocity Model (CVM) to determine averages and variances of Vp, Vs and Vp/Vs versus depth within each HFR. We bound (A, k) versus depth by relying on empirical relations between seismic wave speed and rock type and laboratory and modeling methods relating (A, k) to rock type. Many 1D conductive geotherms for each HFR are allowed by the variances in surface heat flow and subsurface (A, k). An additional constraint on the lithosphere temperature field is provided by comparing lithosphere-asthenosphere boundary (LAB) depths identified seismologically with those defined thermally as the depth of onset of partial melting. Receiver function studies in Southern California indicate LAB depths that range from 40 km to 90 km. Shallow LAB depths are correlated with high surface heat flow and deep LAB with low heat flow. The much-restricted families of geotherms that intersect peridotite solidi at the seismological LAB depth in each region require that LAB temperatures lie between 1050 to 1250˚ C, a range that is consistent with a hydrous rather than anhydrous mantle below Southern California.

UV-induced isomerization of oral retinoids in vitro and in vivo in hairless mice.

PubMed

Berne, B; Rollman, O; Vahlquist, A

1990-08-01

Ultraviolet (UV) irradiation causes isomerization and destruction of many vitamin A analogues (retinoids). Using high-performance liquid chromatography (HPLC), we investigated in vitro and in vivo the effects of UV irradiation on 2 all-trans aromatic retinoids (etretinate and acitretin) and on 13-cis retinoic acid (isotretinoin). When etretinate and acitretin dissolved in ethanol were irradiated with UVB (280-320 nm; 10-336 mJ/cm2) or UVA (320-400 nm; 1-5 J/cm2), extensive and reproducible cis-isomerizations occurred at the 13-position (cis/trans ratio approximately 1.6 in all experiments) but there was no progressive photodegradation of the molecules. Irradiation of isotretinoin produced only moderate trans-isomerization but the sum of HPLC peak heights fell with increasing UV doses, being 72% of the original value after 336 mJ/cm2 of UVB. Hairless mice were given etretinate (50 mg/kg bw), acitretin (200 mg/kg) or isotretinoin (50 mg/kg) on days 1, 4 and 7 and were irradiated daily for 8 d with 13 mJ/cm2 UVB plus 1 J/cm2 UVA. Samples of serum, dorsal skin and liver were collected and retinoids analyzed by HPLC. In the etretinate and acitretin-treated, irradiated animals the serum concentrations of the 13-cis isomers were 2-6 times higher than in nonirradiated controls. Irradiated epidermis also contained significantly higher concentrations of 13-cis etretinate and 13-cis acitretin than did control epidermis. The serum and epidermal concentrations of all-trans etretinate and acitretin were unchanged or even increased after irradiation.(ABSTRACT TRUNCATED AT 250 WORDS)

Critical incidents in a French department of paediatric anaesthesia.

PubMed

Kupersztych-Hagege, Elisa; Duracher-Gout, Caroline; Ortego, Rocio; Carli, Pierre; Orliaguet, Gilles

2017-04-01

Several studies have highlighted the importance of critical incident (CI) reporting in order to enhance patient safety. We have implemented an anonymous procedure for CI reporting in our department of paediatric anaesthesia. This study aims at analysing those CIs so as to improve patient care and risk management. CIs were reported by the anaesthetic team using the World Health Organization classification and analysed using the ORION methodology. CIs were classified according to type, surgery and complications. Risk factors and consequences for patients and for the institution were analysed. Risk factors with high degree of harm for the patient were identified using a univariate analysis and odds ratios (OR). Over an 18-month period, 114 CIs were reported for 103 patients (median age: 7.0 years [95% CI: 3.6-9.8]). We found that 29.9% of reported CIs had consequences for the patients and 76.3% were considered preventable. The two main types of CI were "respiratory" (28.8%) and "drug-related" (22.8%) incidents. The main risk factor was 'human error' (42.3%). Several consequences for the patient and the hospital were identified. An ASA score≥3 (OR: 2.52; [95% CI: 1.10-5.78]) was an independent risk factor for a high degree of patient harm. Improving quality of care must be a priority for paediatric anaesthesiologists as most of the CIs observed are preventable and have consequences for the patient and the institution. Copyright © 2016 Société française d'anesthésie et de réanimation (Sfar). Published by Elsevier Masson SAS. All rights reserved.

Aquarius/SAC-D Observatory Being Crated for Shipment to Brazil

NASA Image and Video Library

2011-04-19

NASA Aquarius/SAC-D being prepared for shipment to Brazil National Institute for Space Research Integration and Testing Lab. At INPE, the Aquarius/SAC-D observatory will undergo its final environmental testing.

Potential energy profile, structural, vibrational and reactivity descriptors of trans-2-methoxycinnamic acid by FTIR, FT-Raman and quantum chemical studies

NASA Astrophysics Data System (ADS)

Arjunan, V.; Anitha, R.; Thenmozhi, S.; Marchewka, M. K.; Mohan, S.

2016-06-01

The stable conformers of trans-2-methoxycinnamic acid (trans-2MCA) are determined by potential energy profile analysis. The energies of the s-cis and s-trans conformers of trans-2MCA determined by B3LYP/cc-pVTZ method are -612.9788331 Hartrees and -612.9780953 Hartrees, respectively. The vibrational and electronic investigations of the stable s-cis and s-trans conformers of trans-2-methoxycinnamic acid have been carried out extensively with FTIR and FT-Raman spectral techniques. The s-cis conformer (I) with a (C16-C17-C18-O19) dihedral angle equal to 0° is found to be more favoured relative to the one s-trans (II) with (C16-C17-C18-O19) = 180°, possibly due to delocalization, hydrogen bonding and steric repulsion effects between the methoxy and acrylic acid groups. The DFT studies are performed with B3LYP method by utilizing 6-311++G** and cc-pVTZ basis sets to determine the structure, thermodynamic properties, vibrational characteristics and chemical shifts of the compound. The total dipole moments of the conformers determined by B3LYP/cc-pVTZ method are 3.35 D and 4.87 D for s-cis and s-trans, respectively. It reveals the higher polarity of s-trans conformer of trans-2MCA molecule. The electronic and steric influence of the methoxy group on the skeletal frequencies has been analysed. The energies of the frontier molecular orbitals and the LUMO-HOMO energy gap have been determined. The MEP of s-cis conformer lie in the range +1.374e × 10-2 to -1.374e × 10-2 while for s-trans it is +1.591e × 10-2 to -1.591e × 10-2. The total electron density of s-cis conformer lie in the range +5.273e × 10-2 to -5.273e × 10-2 while for s-trans it is +5.403e × 10-2 to -5.403e × 10-2. The MEP and total electron density shows that the s-cis conformer is less polar, less reactive and more stable than the s-trans conformer. All the reactivity descriptors of the molecule have been discussed. Intramolecular electronic interactions and their stabilisation energies have analysed by NBO method.

Research-grade CMOS image sensors for remote sensing applications

NASA Astrophysics Data System (ADS)

Saint-Pe, Olivier; Tulet, Michel; Davancens, Robert; Larnaudie, Franck; Magnan, Pierre; Martin-Gonthier, Philippe; Corbiere, Franck; Belliot, Pierre; Estribeau, Magali

2004-11-01

Imaging detectors are key elements for optical instruments and sensors on board space missions dedicated to Earth observation (high resolution imaging, atmosphere spectroscopy...), Solar System exploration (micro cameras, guidance for autonomous vehicle...) and Universe observation (space telescope focal planes, guiding sensors...). This market has been dominated by CCD technology for long. Since the mid-90s, CMOS Image Sensors (CIS) have been competing with CCDs for consumer domains (webcams, cell phones, digital cameras...). Featuring significant advantages over CCD sensors for space applications (lower power consumption, smaller system size, better radiations behaviour...), CMOS technology is also expanding in this field, justifying specific R&D and development programs funded by national and European space agencies (mainly CNES, DGA and ESA). All along the 90s and thanks to their increasingly improving performances, CIS have started to be successfully used for more and more demanding space applications, from vision and control functions requiring low-level performances to guidance applications requiring medium-level performances. Recent technology improvements have made possible the manufacturing of research-grade CIS that are able to compete with CCDs in the high-performances arena. After an introduction outlining the growing interest of optical instruments designers for CMOS image sensors, this paper will present the existing and foreseen ways to reach high-level electro-optics performances for CIS. The developments and performances of CIS prototypes built using an imaging CMOS process will be presented in the corresponding section.

Characterization of a cis-Golgi matrix protein, GM130

PubMed Central

1995-01-01

Antisera raised to a detergent- and salt-resistant matrix fraction from rat liver Golgi stacks were used to screen an expression library from rat liver cDNA. A full-length clone was obtained encoding a protein of 130 kD (termed GM130), the COOH-terminal domain of which was highly homologous to a Golgi human auto-antigen, golgin-95 (Fritzler et al., 1993). Biochemical data showed that GM130 is a peripheral cytoplasmic protein that is tightly bound to Golgi membranes and part of a larger oligomeric complex. Predictions from the protein sequence suggest that GM130 is an extended rod-like protein with coiled-coil domains. Immunofluorescence microscopy showed partial overlap with medial- and trans-Golgi markers but almost complete overlap with the cis-Golgi network (CGN) marker, syntaxin5. Immunoelectron microscopy confirmed this location showing that most of the GM130 was located in the CGN and in one or two cisternae on the cis-side of the Golgi stack. GM130 was not re-distributed to the ER in the presence of brefeldin A but maintained its overlap with syntaxin5 and a partial overlap with the ER- Golgi intermediate compartment marker, p53. Together these results suggest that GM130 is part of a cis-Golgi matrix and has a role in maintaining cis-Golgi structure. PMID:8557739

Clinical inhibition of CYP2D6-catalysed metabolism by the antianginal agent perhexiline

PubMed Central

Davies, Benjamin J L; Coller, Janet K; James, Heather M; Gillis, David; Somogyi, Andrew A; Horowitz, John D; Morris, Raymond G; Sallustio, Benedetta C

2004-01-01

Aims Perhexiline is an antianginal agent that displays both saturable and polymorphic metabolism via CYP2D6. The aim of this study was to determine whether perhexiline produces clinically significant inhibition of CYP2D6-catalysed metabolism in angina patients. Methods The effects of perhexiline on CYP2D6-catalysed metabolism were investigated by comparing urinary total dextrorphan/dextromethorphan metabolic ratios following a single dose of dextromethorphan (16.4 mg) in eight matched control patients not taking perhexiline and 24 patients taking perhexiline. All of the patients taking perhexiline had blood drawn for CYP2D6 genotyping as well as to measure plasma perhexiline and cis-OH-perhexiline concentrations. Results Median (range) dextrorphan/dextromethorphan metabolic ratios were significantly higher (P < 0.0001) in control patients, 271.1 (40.3–686.1), compared with perhexiline-treated patients, 5.0 (0.3–107.9). In the perhexiline-treated group 10/24 patients had metabolic ratios consistent with poor metabolizer phenotypes; however, none was a genotypic poor metabolizer. Interestingly, 89% of patients who had phenocopied to poor metabolizers had only one functional CYP2D6 gene. There was a significant negative linear correlation between the log of the dextrorphan/dextromethorphan metabolic ratio and plasma perhexiline concentrations (r2 = 0.69, P < 0.0001). Compared with patients with at least two functional CYP2D6 genes, those with one functional gene were on similar perhexiline dosage regimens but had significantly higher plasma perhexiline concentrations, 0.73 (0.21–1.00) vs. 0.36 (0.04–0.69) mg l−1 (P = 0.04), lower cis-OH-perhexiline/perhexiline ratios, 2.85 (0.35–6.10) vs. 6.51 (1.84–11.67) (P = 0.03), and lower dextrorphan/dextromethorphan metabolic ratios, 2.51 (0.33–39.56) vs. 11.80 (2.90–36.93) (P = 0.005). Conclusions Perhexiline significantly inhibits CYP2D6-catalysed metabolism in angina patients. The plasma cis-OH-perhexiline/perhexiline ratio may help to both phenotype patients and predict those in whom perhexiline may be most likely to cause clinically significant metabolic inhibition. PMID:15025744

National Lab Science Day | News

Science.gov Websites

Laboratory news From lab leadership Submit content - login required Provide feedback Subscribe to our officer at Fermilab, guided Secretary Moniz and members of the U.S. Senate and House on virtual tours of virtual tour Particle detector tours Collisions in 3-D DOE facilities Dark matter and dark energy Particle

In vivo and in vitro immunomodulation of Der p 1 allergen-specific response by Lactobacillus plantarum bacteria.

PubMed

Hisbergues, M; Magi, M; Rigaux, P; Steuve, J; Garcia, L; Goudercourt, D; Pot, B; Pestel, J; Jacquet, A

2007-09-01

Lactic acid bacteria (LAB) were reported to reduce some allergic manifestations in mice and humans but their impact on the aeroallergen-dependent immune mechanisms is still debated. The potential capacities of Lactobacillus plantarum NCIMB8826 to reduce the allergic response induced by Der p 1, the major house dust mite allergen of Dermatophagoides pteronyssinus, were evaluated in vivo and in vitro. Methods First, the effect of the intranasal co-administration of LAB and purified Der p 1 allergen before a sensitization protocol was evaluated. The allergen-specific antibody and cellular responses as well as airway inflammation were measured. Second, the impact of LAB on the cytokine profile of spleens cells from Der p 1-sensitized mice was assessed. Third, upon stimulation with LAB, the levels of cytokine produced by dendritic cells derived from the bone marrow (BMDCs) of wild-type, Toll-like receptor 2 (TLR2)-, TLR4- and MyD88-KO mice were compared. Results The co-application of L. plantarum and Der p 1 induced a T-helper type 1 (Th1)-biased allergen-specific IgG response, the absence of specific IgE response and favoured the production of INF-gamma upon allergen re-stimulation. Moreover, the previous LAB administration reduced the development of bronchoalveolar lavage eosinophilia usually induced by aerosol exposure. Additionally, the studied LAB strain was shown to modify in vitro the cytokine level produced by Der p 1-sensitized spleen cells mainly towards a Th1 profile. Finally, L. plantarum stimulated high IL-12 and moderate IL-10 production in mouse BMDCs notably through the TLR2-, MyD88-dependent and TLR4-independent pathway. In vivo co-administration of probiotic LAB with Der p 1 might prevent the development of the mite allergic response. The probiotic L. plantarum was shown to display in vitro therapeutic potentials for the treatment of allergy and to trigger the immune system by a TLR2- and MyD88-dependent signalling pathway.

Theory and simulations of adhesion receptor dimerization on membrane surfaces.

PubMed

Wu, Yinghao; Honig, Barry; Ben-Shaul, Avinoam

2013-03-19

The equilibrium constants of trans and cis dimerization of membrane bound (2D) and freely moving (3D) adhesion receptors are expressed and compared using elementary statistical-thermodynamics. Both processes are mediated by the binding of extracellular subdomains whose range of motion in the 2D environment is reduced upon dimerization, defining a thin reaction shell where dimer formation and dissociation take place. We show that the ratio between the 2D and 3D equilibrium constants can be expressed as a product of individual factors describing, respectively, the spatial ranges of motions of the adhesive domains, and their rotational freedom within the reaction shell. The results predicted by the theory are compared to those obtained from a novel, to our knowledge, dynamical simulations methodology, whereby pairs of receptors perform realistic translational, internal, and rotational motions in 2D and 3D. We use cadherins as our model system. The theory and simulations explain how the strength of cis and trans interactions of adhesive receptors are affected both by their presence in the constrained intermembrane space and by the 2D environment of membrane surfaces. Our work provides fundamental insights as to the mechanism of lateral clustering of adhesion receptors after cell-cell contact and, more generally, to the formation of lateral microclusters of proteins on cell surfaces. Copyright © 2013 Biophysical Society. Published by Elsevier Inc. All rights reserved.

Ames Lab 101: Real-Time 3D Imaging

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhang, Song

2010-08-02

Ames Laboratory scientist Song Zhang explains his real-time 3-D imaging technology. The technique can be used to create high-resolution, real-time, precise, 3-D images for use in healthcare, security, and entertainment applications.

Ames Lab 101: Real-Time 3D Imaging

ScienceCinema

Zhang, Song

2017-12-22

Ames Laboratory scientist Song Zhang explains his real-time 3-D imaging technology. The technique can be used to create high-resolution, real-time, precise, 3-D images for use in healthcare, security, and entertainment applications.

Laser subtractive-additive-welding microfabrication for Lab-On-Chip (LOC) applications

NASA Astrophysics Data System (ADS)

Jonušauskas, Linas; RekštytÄ--, Sima; Buivydas, Ričardas; Butkus, Simas; Paipulas, Domas; Gadonas, Roaldas; Juodkazis, Saulius; Malinauskas, Mangirdas

2017-02-01

An approach employing ultrafast laser hybrid microfabrication combining ablation, 3D nanolithography and welding is proposed for the realization of Lab-On-Chip (LOC) device. The same laser setup is shown to be suitable for fabricating microgrooves in glass slabs, polymerization of fine meshes inside them, and, lastly, sealing the whole chip with cover glass into one monolithic piece. The created micro fluidic device proved its particle sorting function by separating 1 μm and 10 μm polystyrene spheres from a mixture. Next, a lens adapter for a cell phone's camera was manufactured via thermal extrusion 3D printing technique which allowed to achieve sufficient magnification to clearly resolve <10 μm features. All together shows fs-laser microfabrication technology as a flexible and versatile tool for study and manufacturing of Lab-On-Chip devices.

Review of aerodynamic design in the Netherlands

NASA Technical Reports Server (NTRS)

Labrujere, Th. E.

1991-01-01

Aerodynamic design activities in the Netherlands, which take place mainly at Fokker, the National Aerospace Laboratory (NLR), and Delft University of Technology (TUD), are discussed. The survey concentrates on the development of the Fokker 100 wing, glider design at TUD, and research at NLR in the field of aerodynamic design. Results are shown to illustrate these activities.

What's Your Story?: Dutch Library DOK's New Cutting-Edge Community Tech Projects

ERIC Educational Resources Information Center

Boekesteijn, Erik

2010-01-01

DOK, the cutting-edge library center in Delft, the Netherlands, has been finding new ways to elaborate on the social networking impulse. A good library unites people from all levels of society, and DOK's unique innovation department focuses specifically on how media can bring people together. It's doing so using technology to inspire and connect…

Curves and Surfaces

DTIC Science & Technology

1990-01-01

Morten Dohlen Center for Industrial Rcsearch(SI), Box 124 Blindern, 0314 Oslo 3, Norway. Abstract. The combination of refinement and decomposition...of Technology Faculty of Industrial Design Engineering Section Mechanical Engineering Design Jaffalaan 9 NL-2628 BX Delft The Netherlands louwe...OF A GIVEN SET OF POINTS Leonardo Traversoni Dominguez Division de Ciencias Basicas e Ingenieria Universidad Autonoma Metropolitana (Iztapalapa) ap

Delft University at the TREC 2009 Entity Track: Ranking Wikipedia Entities

DTIC Science & Technology

2009-11-01

2http://www.mpi-inf.mpg.de/ yago -naga/ 3http://dbpedia.org/ontology/ 4.4.2 Using infoboxes, Yago and Wordnet Since only a limited number of Wikipedia...sources: properties specified in the infobox of al- most every article (around 1,750,000), and Wordnet classes assigned by Yago to almost every second

Challenging E-Learning: An Evaluation of the STUDIO Project at TU Delft

ERIC Educational Resources Information Center

Kamp, L. M.; De Jong, F.; Ravesteijn, W.

2008-01-01

Lots of papers are being published about e-learning in engineering education. In these papers, positive experiences and aspects seem to overshadow negative ones. However, there are still some problematic sides worth studying. In order to improve its quality these should receive broad attention too. We present an explicit two-sided evaluation of…

The Use of Video-Taped Lectures and Web-Based Communications in Teaching: A Distance-Teaching and Cross-Atlantic Collaboration Experiment.

ERIC Educational Resources Information Center

Herder, P. M.; Subrahmanian, E.; Talukdar, S.; Turk, A. L.; Westerberg, A. W.

2002-01-01

Explains distance education approach applied to the 'Engineering Design Problem Formulation' course simultaneously at the Delft University of Technology (the Netherlands) and at Carnegie Mellon University (CMU, Pittsburgh, USA). Uses video taped lessons, video conferencing, electronic mails and web-accessible document management system LIRE in the…

Quantification of Surf Zone Bathymetry from Video Observations of Wave Breaking

NASA Astrophysics Data System (ADS)

Aarninkhof, S.; Ruessink, G.

2002-12-01

Cost-efficient methods to quantify surf zone bathymetry with high resolution in time and space would be of great value for coastal research and management. Automated video techniques provide the potential to do so. Time-averaged video observations of the nearshore zone show bright intensities at locations where waves preferentially break. Highly similar patterns are found from model simulations of depth-induced wave breaking, which show increasing rates of wave dissipation in shallow areas like sand bars. Thus, video observations of wave breaking - at least qualitatively - reflect sub-merged beach bathymetry. In search of the quantification of this relationship, we present a new model concept to map sub-merged beach bathymetry from time-averaged video images. This is achieved by matching model-predicted and video-observed rates of wave dissipation. First, time-averaged image intensities are sampled along a cross-shore array and interpreted in terms of a wave dissipation parameter. This involves a correction for the effect of persistent foam, which is visible at time-averaged video images but not predicted by common wave propagation models. The dissipation profiles thus obtained are used to update an initial beach bathymetry through optimisation of the match between measured and modelled rates of wave dissipation. The latter is done by raising the bottom elevation in areas where the measured dissipation rate exceeds the computed dissipation and vice versa. Since the model includes video data with high resolution in time (typically multiple images over a tidal cycle), it allows for virtually continous monitoring of surfzone bathymetry . Model tests against a synthetic data set of artificially generated wave dissipation profiles have shown the model's capability to accurately reconstruct beach bathymetry, over a wide range of morphological configurations. Maximum model deviations were found in the case of highly developed bar-trough systems (bar heights up to 4 m) and near the shoreline. Model performance strongly benefits from an increase of wave heights and tidal ranges. At the moment, the model is subject to validation against a data set of multiple-barred beach profiles, surveyed during a 3 week period of stormy wheather in the course of the Coast3D field experiments at Egmond (The Netherlands). Although the video-based estimates of bar bathymetry show a shoreward off-set of the location of the inner bar and vertical deviations of 0.5 (0.8) m near the outer (inner) bar crest, these preliminary results show a promising match in terms of profile shape and the migration of the seaward bar face. Model application at the time scale of months to years is subject to present research. This work was supported by the DIOC Earth Observations of Delft University of Technology, the Delft Cluster program at Delft Hydraulics, the Dutch Ministry of Public Works Rijkswaterstaaat and the EU-funded Coastview project.

Recovery of fermented inulin fiber by lactic acid bacteria (LAB) from inulin hydrolysate using fungi inulinase enzymes of Scopulariopsis sp.-CBS1 and class of Deuteromycetes-CBS4 as cholesterol binder

NASA Astrophysics Data System (ADS)

Susilowati, Agustine; Melanie, Hakiki; Maryati, Yati; Aspiyanto

2017-01-01

Fermentation of Lactobacillus Acid Bacteria (LAB) which are mixtures of Lactobacillus acidophilus, Bifidobacteriumbifidum, Lactobacillus bulgaricus and Streptococcus thermophillus on hydrolysate as a result of inulin hydrolysis using inulinase enzymes obtained from endophytic fungi ofScopulariopsis sp.-CBS1 (inulin hydrolysate of S) and Class of Deuteromycetes-CBS4 (inulin hydrolysate of D) generate potential fermented inulin fiber as cholesterol binder. Fermentation process was conducted under concentrations of inulin hydrolysate 50% (w/v), LAB 15% (v/v) and skim milk 12.5% (w/v) at room temperature and 40°C for 0, 12, 24, 36 and 48 hours, respectively. Result of experimental work showed that longer time of LAB fermentation increased total acids, TPC and CBC at pH 2, but decreased total sugar, reducing, IDF, SDF, CBC pH 2 and CBC pH 7. Based on Cholesterol Binding Capacity (CBC), optimization of fermentation process on inulin hydrolysate of S was achieved by combining treatment at 40°C for 24 hours resulted in CBC pH 2 of 19.11 mg/g TDF and inulin hydrolysate of D was achieved by fermentation at 40 °C for 48 hours resulted in CBC pH 2 of 24.28 mg/g TDF. Inulin hydrolysate of class of Deutrymecetes CBS4 fermented by LAB had better functional property as cholesterol binder than that inulin hydrolysate of S fermented by LAB. This is due to cholesterol binder and cholesterol derivatives as a result of degradation of LAB on digestive system (stomach) when compared to higher colon under optimal process condition.

Integration of lncRNA and mRNA Transcriptome Analyses Reveals Genes and Pathways Potentially Involved in Calf Intestinal Growth and Development during the Early Weeks of Life

PubMed Central

Do, Duy N.; Dudemaine, Pier-Luc; Fomenky, Bridget E.

2018-01-01

A better understanding of the factors that regulate growth and immune response of the gastrointestinal tract (GIT) of calves will promote informed management practices in calf rearing. This study aimed to explore genomics (messenger RNA (mRNA)) and epigenomics (long non-coding RNA (lncRNA)) mechanisms regulating the development of the rumen and ileum in calves. Thirty-two calves (≈5-days-old) were reared for 96 days following standard procedures. Sixteen calves were humanely euthanized on experiment day 33 (D33) (pre-weaning) and another 16 on D96 (post-weaning) for collection of ileum and rumen tissues. RNA from tissues was subjected to next generation sequencing and 3310 and 4217 mRNAs were differentially expressed (DE) between D33 and D96 in ileum and rumen tissues, respectively. Gene ontology and pathways enrichment of DE genes confirmed their roles in developmental processes, immunity and lipid metabolism. A total of 1568 (63 known and 1505 novel) and 4243 (88 known and 4155 novel) lncRNAs were detected in ileum and rumen tissues, respectively. Cis target gene analysis identified BMPR1A, an important gene for a GIT disease (juvenile polyposis syndrome) in humans, as a candidate cis target gene for lncRNAs in both tissues. LncRNA cis target gene enrichment suggested that lncRNAs might regulate growth and development in both tissues as well as posttranscriptional gene silencing by RNA or microRNA processing in rumen, or disease resistance mechanisms in ileum. This study provides a catalog of bovine lncRNAs and set a baseline for exploring their functions in calf GIT development. PMID:29510583

Integration of lncRNA and mRNA Transcriptome Analyses Reveals Genes and Pathways Potentially Involved in Calf Intestinal Growth and Development during the Early Weeks of Life.

PubMed

Ibeagha-Awemu, Eveline M; Do, Duy N; Dudemaine, Pier-Luc; Fomenky, Bridget E; Bissonnette, Nathalie

2018-03-05

A better understanding of the factors that regulate growth and immune response of the gastrointestinal tract (GIT) of calves will promote informed management practices in calf rearing. This study aimed to explore genomics (messenger RNA (mRNA)) and epigenomics (long non-coding RNA (lncRNA)) mechanisms regulating the development of the rumen and ileum in calves. Thirty-two calves (≈5-days-old) were reared for 96 days following standard procedures. Sixteen calves were humanely euthanized on experiment day 33 (D33) (pre-weaning) and another 16 on D96 (post-weaning) for collection of ileum and rumen tissues. RNA from tissues was subjected to next generation sequencing and 3310 and 4217 mRNAs were differentially expressed (DE) between D33 and D96 in ileum and rumen tissues, respectively. Gene ontology and pathways enrichment of DE genes confirmed their roles in developmental processes, immunity and lipid metabolism. A total of 1568 (63 known and 1505 novel) and 4243 (88 known and 4155 novel) lncRNAs were detected in ileum and rumen tissues, respectively. Cis target gene analysis identified BMPR1A , an important gene for a GIT disease (juvenile polyposis syndrome) in humans, as a candidate cis target gene for lncRNAs in both tissues. LncRNA cis target gene enrichment suggested that lncRNAs might regulate growth and development in both tissues as well as posttranscriptional gene silencing by RNA or microRNA processing in rumen, or disease resistance mechanisms in ileum. This study provides a catalog of bovine lncRNAs and set a baseline for exploring their functions in calf GIT development.

Probiotic Properties of Lactobacillus Strains Isolated from Tibetan Kefir Grains

PubMed Central

Zheng, Yongchen; Lu, Yingli; Wang, Jinfeng; Yang, Longfei; Pan, Chenyu; Huang, Ying

2013-01-01

The objective of this study was to evaluate the functional properties of lactic acid bacteria (LAB) isolated from Tibetan kefir grains. Three Lactobacillus isolates identified as Lactobacillus acidophilus LA15, Lactobacillus plantarum B23 and Lactobacillus kefiri D17 that showed resistance to acid and bile salts were selected for further evaluation of their probiotic properties. The 3 selected strains expressed high in vitro adherence to Caco-2 cells. They were sensitive to gentamicin, erythromycin and chloramphenicol and resistant to vancomycin with MIC values of 26 µg/ml. All 3 strains showed potential bile salt hydrolase (BSH) activity, cholesterol assimilation and cholesterol co-precipitation ability. Additionally, the potential effect of these strains on plasma cholesterol levels was evaluated in Sprague-Dawley (SD) rats. Rats in 4 treatment groups were fed the following experimental diets for 4 weeks: a high-cholesterol diet, a high-cholesterol diet plus LA15, a high-cholesterol diet plus B23 or a high-cholesterol diet plus D17. The total cholesterol, triglyceride and low-density lipoprotein cholesterol levels in the serum were significantly (P<0.05) decreased in the LAB-treated rats compared with rats fed a high-cholesterol diet without LAB supplementation. The high-density lipoprotein cholesterol levels in groups B23 and D17 were significantly (P<0.05) higher than those in the control and LA15 groups. Additionally, both fecal cholesterol and bile acid levels were significantly (P<0.05) increased after LAB administration. Fecal lactobacilli counts were significantly (P<0.05) higher in the LAB treatment groups than in the control groups. Furthermore, the 3 strains were detected in the rat small intestine, colon and feces during the feeding trial. The bacteria levels remained high even after the LAB administration had been stopped for 2 weeks. These results suggest that these strains may be used in the future as probiotic starter cultures for manufacturing novel fermented foods. PMID:23894554

Developing Guided Inquiry-Based Student Lab Worksheet for Laboratory Knowledge Course

NASA Astrophysics Data System (ADS)

Rahmi, Y. L.; Novriyanti, E.; Ardi, A.; Rifandi, R.

2018-04-01

The course of laboratory knowledge is an introductory course for biology students to follow various lectures practicing in the biology laboratory. Learning activities of laboratory knowledge course at this time in the Biology Department, Universitas Negeri Padang has not been completed by supporting learning media such as student lab worksheet. Guided inquiry learning model is one of the learning models that can be integrated into laboratory activity. The study aimed to produce student lab worksheet based on guided inquiry for laboratory knowledge course and to determine the validity of lab worksheet. The research was conducted using research and developmet (R&D) model. The instruments used in data collection in this research were questionnaire for student needed analysis and questionnaire to measure the student lab worksheet validity. The data obtained was quantitative from several validators. The validators consist of three lecturers. The percentage of a student lab worksheet validity was 94.18 which can be categorized was very good.

DNA interactions of antitumor cisplatin analogs containing enantiomeric amine ligands.

PubMed Central

Malina, J; Hofr, C; Maresca, L; Natile, G; Brabec, V

2000-01-01

Modifications of natural DNA and synthetic oligodeoxyribonucleotide duplexes in a cell-free medium by analogs of antitumor cisplatin containing enantiomeric amine ligands, such as cis-[PtCl(2)(RR-DAB)] and cis-[PtCl(2)(SS-DAB)] (DAB = 2,3-diaminobutane), were studied by various methods of molecular biophysics and biophysical chemistry. These methods include DNA binding studies by pulse polarography and atomic absorption spectrophotometry, mapping of DNA adducts using transcription assay, interstrand cross-linking assay using gel electrophoresis under denaturing conditions, differential scanning calorimetry, chemical probing, and bending and unwinding studies of the duplexes containing single, site-specific cross-link. The major differences resulting from the modification of DNA by the two enantiomers are the thermodynamical destabilization and conformational distortions induced in DNA by the 1,2-d(GpG) intrastrand cross-link. It has been suggested that these differences are associated with a different biological activity of the two enantiomers observed previously. In addition, the results of the present work are also consistent with the view that formation of hydrogen bonds between the carbonyl oxygen of the guanine residues and the "quasi equatorial" hydrogen of the cis amine in the 1, 2-d(GpG) intrastrand cross-link plays an important role in determining the character of the distortion induced in DNA by this lesion. PMID:10733979

Bilateral Versus Unilateral Cochlear Implantation in Adult Listeners: Speech-On-Speech Masking and Multitalker Localization.

PubMed

Rana, Baljeet; Buchholz, Jörg M; Morgan, Catherine; Sharma, Mridula; Weller, Tobias; Konganda, Shivali Appaiah; Shirai, Kyoko; Kawano, Atsushi

2017-01-01

Binaural hearing helps normal-hearing listeners localize sound sources and understand speech in noise. However, it is not fully understood how far this is the case for bilateral cochlear implant (CI) users. To determine the potential benefits of bilateral over unilateral CIs, speech comprehension thresholds (SCTs) were measured in seven Japanese bilateral CI recipients using Helen test sentences (translated into Japanese) in a two-talker speech interferer presented from the front (co-located with the target speech), ipsilateral to the first-implanted ear (at +90° or -90°), and spatially symmetric at ±90°. Spatial release from masking was calculated as the difference between co-located and spatially separated SCTs. Localization was assessed in the horizontal plane by presenting either male or female speech or both simultaneously. All measurements were performed bilaterally and unilaterally (with the first implanted ear) inside a loudspeaker array. Both SCTs and spatial release from masking were improved with bilateral CIs, demonstrating mean bilateral benefits of 7.5 dB in spatially asymmetric and 3 dB in spatially symmetric speech mixture. Localization performance varied strongly between subjects but was clearly improved with bilateral over unilateral CIs with the mean localization error reduced by 27°. Surprisingly, adding a second talker had only a negligible effect on localization.

Neutron production cross sections for (d,n) reactions at 55 MeV

NASA Astrophysics Data System (ADS)

Wakasa, T.; Goto, S.; Matsuno, M.; Mitsumoto, S.; Okada, T.; Oshiro, H.; Sakaguchi, S.

2017-08-01

The cross sections for (d,n) reactions on {}^natC-{}^{197}Au have been measured at a bombarding energy of 55 MeV and a laboratory scattering angle of θ_lab = 9.5°. The angular distributions for the {}^natC(d,n) reaction have also been obtained at θ_lab = 0°-40°. The neutron energy spectra are dominated by deuteron breakup contributions and their peak positions can be reasonably reproduced by considering the Coulomb force effects. The data are compared with the TENDL-2015 nuclear data and Particle and Heavy Ion Transport code System (PHITS) calculations. Both calculations fail to reproduce the measured energy spectra and angular distributions.

Developing Strategies to Block Beta-Catenin Action in Signaling and Cell Adhesion During Carcinogenesis

DTIC Science & Technology

2002-07-01

this section was published in a paper from our lab in Molecular Biology of the Cell (Simcha et al., 2001)--below we refer to Figures in this paper...work, both in yeast and in mammalian cells, were recently published in Molecular Biology of the Cell (Simcha et al., 2001), and the work from our lab ...detail genetic and molecular interactions between gro, wg ,arm and dTCF (task 2 and 4 above)- this work was a collaboration with the labs of Amy

Electroluminescence from completely horizontally oriented dye molecules

DOE Office of Scientific and Technical Information (OSTI.GOV)

Komino, Takeshi; Center for Organic Photonics and Electronics Research, Kyushu University, 744 Motooka, Nishi, Fukuoka 819-0395; Japan Science and Technology Agency, ERATO, Adachi Molecular Exciton Engineering Project, 744 Motooka, Nishi, Fukuoka 819-0395

2016-06-13

A complete horizontal molecular orientation of a linear-shaped thermally activated delayed fluorescent guest emitter 2,6-bis(4-(10Hphenoxazin-10-yl)phenyl)benzo[1,2-d:5,4-d′] bis(oxazole) (cis-BOX2) was obtained in a glassy host matrix by vapor deposition. The orientational order of cis-BOX2 depended on the combination of deposition temperature and the type of host matrix. Complete horizontal orientation was obtained when a thin film with cis-BOX2 doped in a 4,4′-bis(N-carbazolyl)-1,1′-biphenyl (CBP) host matrix was fabricated at 200 K. The ultimate orientation of guest molecules originates from not only the kinetic relaxation but also the kinetic stability of the deposited guest molecules on the film surface during film growth. Utilizing the ultimatemore » orientation, a highly efficient organic light-emitting diode with the external quantum efficiency of 33.4 ± 2.0% was realized. The thermal stability of the horizontal orientation of cis-BOX2 was governed by the glass transition temperature (T{sub g}) of the CBP host matrix; the horizontal orientation was stable unless the film was annealed above T{sub g}.« less

Theoretical and experimental study of the conformational and vibrational properties of benzoin

NASA Astrophysics Data System (ADS)

Pawelka, Zbignew; Kryachko, Eugene S.; Zeegers-Huyskens, Thérèse

2003-02-01

The conformational and vibrational properties of benzoin are theoretically studied at the B3LYP/6-31+G(d,p) computational level. Three lower energy stable structures are found on its potential energy surface. The two first structures correspond to cis- and trans-benzoin. The cis isomer, stabilized by an intramolecular OH⋯O hydrogen bond, is more favorable by 3.4 kcal mol -1 over the trans isomer. The third structure refers to the dienol tautomer ( cis-stilbendiol) which is less stable by 7.6 kcal mol -1. In carbon tetrachloride, benzoin is in the cis conformation. The calculated vibrational frequencies are compared with the experimental ones. When the ν(OH) and ν(CH) vibrations are corrected for anharmonicities, an average scaling factor of 0.980 is deduced. The IR and Raman spectra of solid benzoin are analyzed as well and discussed in terms of the structure determined by X-ray diffraction [Acta crystallogr. B 36 (1980) 2832]. The isotopic ratio ν(OH)/ ν(OD) reflects the weakness of the intramolecular hydrogen bond in solution and of the intermolecular hydrogen bond in the solid state. This weakness can be accounted for by the great departure of the hydrogen bond from linearity.

Experimental and Numerical Investigation of Combined Sensible/Latent Thermal Energy Storage for High-Temperature Applications.

PubMed

Geissbühler, Lukas; Zavattoni, Simone; Barbato, Maurizio; Zanganeh, Giw; Haselbacher, Andreas; Steinfeld, Aldo

2015-01-01

Combined sensible/latent heat storage allows the heat-transfer fluid outflow temperature during discharging to be stabilized. A lab-scale combined storage consisting of a packed bed of rocks and steel-encapsulated AlSi(12) was investigated experimentally and numerically. Due to the small tank-to-particle diameter ratio of the lab-scale storage, void-fraction variations were not negligible, leading to channeling effects that cannot be resolved in 1D heat-transfer models. The void-fraction variations and channeling effects can be resolved in 2D models of the flow and heat transfer in the storage. The resulting so-called bypass fraction extracted from the 2D model was used in the 1D model and led to good agreement with experimental measurements.

The spatial sensitivity of Sp converted waves—scattered-wave kernels and their applications to receiver-function migration and inversion

NASA Astrophysics Data System (ADS)

Mancinelli, N. J.; Fischer, K. M.

2018-03-01

We characterize the spatial sensitivity of Sp converted waves to improve constraints on lateral variations in uppermost-mantle velocity gradients, such as the lithosphere-asthenosphere boundary (LAB) and the mid-lithospheric discontinuities. We use SPECFEM2D to generate 2-D scattering kernels that relate perturbations from an elastic half-space to Sp waveforms. We then show that these kernels can be well approximated using ray theory, and develop an approach to calculating kernels for layered background models. As proof of concept, we show that lateral variations in uppermost-mantle discontinuity structure are retrieved by implementing these scattering kernels in the first iteration of a conjugate-directions inversion algorithm. We evaluate the performance of this technique on synthetic seismograms computed for 2-D models with undulations on the LAB of varying amplitude, wavelength and depth. The technique reliably images the position of discontinuities with dips <35° and horizontal wavelengths >100-200 km. In cases of mild topography on a shallow LAB, the relative brightness of the LAB and Moho converters approximately agrees with the ratio of velocity contrasts across the discontinuities. Amplitude retrieval degrades at deeper depths. For dominant periods of 4 s, the minimum station spacing required to produce unaliased results is 5 km, but the application of a Gaussian filter can improve discontinuity imaging where station spacing is greater.

VIBA-Lab 3.0: Computer program for simulation and semi-quantitative analysis of PIXE and RBS spectra and 2D elemental maps

NASA Astrophysics Data System (ADS)

Orlić, Ivica; Mekterović, Darko; Mekterović, Igor; Ivošević, Tatjana

2015-11-01

VIBA-Lab is a computer program originally developed by the author and co-workers at the National University of Singapore (NUS) as an interactive software package for simulation of Particle Induced X-ray Emission and Rutherford Backscattering Spectra. The original program is redeveloped to a VIBA-Lab 3.0 in which the user can perform semi-quantitative analysis by comparing simulated and measured spectra as well as simulate 2D elemental maps for a given 3D sample composition. The latest version has a new and more versatile user interface. It also has the latest data set of fundamental parameters such as Coster-Kronig transition rates, fluorescence yields, mass absorption coefficients and ionization cross sections for K and L lines in a wider energy range than the original program. Our short-term plan is to introduce routine for quantitative analysis for multiple PIXE and XRF excitations. VIBA-Lab is an excellent teaching tool for students and researchers in using PIXE and RBS techniques. At the same time the program helps when planning an experiment and when optimizing experimental parameters such as incident ions, their energy, detector specifications, filters, geometry, etc. By "running" a virtual experiment the user can test various scenarios until the optimal PIXE and BS spectra are obtained and in this way save a lot of expensive machine time.

Comparison of alternative beef production systems based on forage finishing or grain-forage diets with or without growth promotants: 2. Meat quality, fatty acid composition, and overall palatability.

PubMed

Faucitano, L; Chouinard, P Y; Fortin, J; Mandell, I B; Lafrenière, C; Girard, C L; Berthiaume, R

2008-07-01

Five beef cattle management regimens were evaluated for their effect on meat quality, fatty acid composition, and overall palatability of the longis-simus dorsi (LD) muscle in Angus cross steers. A 98-d growing phase was conducted using grass silage with or without supplementation of growth promotants (Revalor G and Rumensin) or soybean meal. Dietary treatments in the finishing phase were developed with or without supplementation of growth promotants based on exclusive feeding of forages with no grain supplementation, or the feeding of grain:forage (70:30) diets. Growth promotants increased (P < 0.01) shear force and tended (P = 0.06) to increase toughness of the LD muscle due to limited postmortem proteolytic activity (lower myofibrillar fragmentation index value; P = 0.02). Grain feeding increased DM and intramuscular fat content (P = 0.03 and P = 0.05, respectively) in the LD but decreased the sensory panel tenderness score (P = 0.01). Growth promotants increased (P

Modulating lysosomal function through lysosome membrane permeabilization or autophagy suppression restores sensitivity to cisplatin in refractory non-small-cell lung cancer cells.

PubMed

Circu, Magdalena; Cardelli, James; Barr, Martin; O'Byrne, Kenneth; Mills, Glenn; El-Osta, Hazem

2017-01-01

Lung cancer is the leading cause of cancer-related deaths. Most patients develop resistance to platinum within several months of treatment. We investigated whether triggering lysosomal membrane permeabilization (LMP) or suppressing autophagy can restore cisplatin susceptibility in lung cancer with acquired chemoresistance. Cisplatin IC50 in A549Pt (parental) and A549cisR (cisplatin resistant) cells was 13 μM and 47 μM, respectively. Following cisplatin exposure, A549cisR cells failed to elicit an apoptotic response. This was manifested by diminished Annexin-V staining, caspase 3 and 9, BAX and BAK activation in resistant but not in parental cells. Chloroquine preferentially promoted LMP in A549cisR cells, revealed by leakage of FITC-dextran into the cytosol as detected by immunofluorescence microscopy. This was confirmed by increased cytosolic cathepsin D signal on Immunoblot. Cell viability of cisplatin-treated A549cisR cells was decreased when co-treated with chloroquine, corresponding to a combination index below 0.8, suggesting synergism between the two drugs. Notably, chloroquine activated the mitochondrial cell death pathway as indicated by increase in caspase 9 activity. Interestingly, inhibition of lysosomal proteases using E64 conferred cytoprotection against cisplatin and chloroquine co-treatment, suggesting that chloroquine-induced cell death occurred in a cathepsin-mediated mechanism. Likewise, blockage of caspases partially rescued A549cisR cells against the cytotoxicity of cisplatin and chloroquine combination. Cisplatin promoted a dose-dependent autophagic flux induction preferentially in A549cisR cells, as evidenced by a surge in LC3-II/α-tubulin following pre-treatment with E64 and increase in p62 degradation. Compared to untreated cells, cisplatin induced an increase in cyto-ID-loaded autophagosomes in A549cisR cells that was further amplified by chloroquine, pointing toward autophagic flux activation by cisplatin. Interestingly, this effect was less pronounced in A549Pt cells. Blocking autophagy by ATG5 depletion using siRNA markedly enhances susceptibility to cisplatin in A549cisR cells. Taken together, our results underscore the utility of targeting lysosomal function in overcoming acquired cisplatin refractoriness in lung cancer.

Sputum fungal smear

MedlinePlus

... in the test sample. Some labs use different measurements or test different samples. Talk to your doctor ... A.D.A.M. follows rigorous standards of quality and accountability. A.D.A.M. is among ...

"OpenLAB": A 2-Hour PCR-Based Practical for High School Students

ERIC Educational Resources Information Center

Bouakaze, Caroline; Eschbach, Judith; Fouquerel, Elise; Gasser, Isabelle; Kieffer, Emmanuelle; Krieger, Sophie; Milosevic, Sara; Saandi, Thoueiba; Florentz, Catherine; Marechal-Drouard, Laurence; Labouesse, Michel

2010-01-01

The Strasbourg University PhD school in Life and Health Sciences launched an initiative called "OpenLAB." This project was developed in an effort to help high school teenagers understand theoretical and abstract concepts in genetics. A second objective of this program is to help students in defining their future orientation and to…

360 Video Tour of 3D Printing Labs at LLNL

ScienceCinema

None

2018-01-16

Additive manufacturing is changing the way the world thinks about manufacturing and design. And here at Lawrence Livermore National Laboratory, it’s changing the way our scientists approach research and development. Today we’ll look around three of the additive manufacturing research labs on the Lawrence Livermore campus.

NHEXAS PHASE I MARYLAND STUDY--STANDARD OPERATING PROCEDURE FOR LAB RESULTS DATA ENTRY AND PREPARATION (D03)

EPA Science Inventory

The purpose of this SOP is to describe how lab results are organized and processed into the official database known as the Complete Dataset (CDS); to describe the structure and creation of the Analysis-ready Dataset (ADS); and to describe the structure and process of creating the...

Computer Programs for Chemistry Experiments I and II.

ERIC Educational Resources Information Center

Reynard, Dale C.

This unit of instruction includes nine laboratory experiments. All of the experiments are from the D.C. Health Revision of the Chemical Education Materials Study (CHEMS) with one exception. Program six is the lab from the original version of the CHEMS program. Each program consists of three parts (1) the lab and computer hints, (2) the description…

Symbiosis between microorganisms from kombucha and kefir: Potential significance to the enhancement of kombucha function.

PubMed

Yang, Zhiwei; Zhou, Feng; Ji, Baoping; Li, Bo; Luo, Yangchao; Yang, Li; Li, Tao

2010-01-01

Gluconacetobacter sp. A4 (G. sp. A4), which had strong ability to produce d-saccharic acid 1, 4 lactone (DSL), was the key functional bacteria isolated from the kombucha preserved. This paper investigated the interaction between G. sp. A4 and ten different strains of lactic acid bacteria (LAB) obtained from kefir. The result suggested that the LAB promoted DSL production of G. sp. A4 to different extents, ranging from 4.86% to 86.70%. Symbiosis between G. sp. A4 and LAB was studied. LAB's metabolites, xylitol, and acetic acid, were utilized by G. sp. A4, and it promoted the growth of G. sp. A4 and yield of DSL. Therefore, in developing starter cultures for kombucha fermentation process, a mixed flora of LAB and G. sp. A4 would be the optimal combination.

Excited state dynamics & optical control of molecular motors

NASA Astrophysics Data System (ADS)

Wiley, Ted; Sension, Roseanne

2014-03-01

Chiral overcrowded alkenes are likely candidates for light driven rotary molecular motors. At their core, these molecular motors are based on the chromophore stilbene, undergoing ultrafast cis/trans photoisomerization about their central double bond. Unlike stilbene, the photochemistry of molecular motors proceeds in one direction only. This unidirectional rotation is a result of helicity in the molecule induced by steric hindrance. However, the steric hindrance which ensures unidirectional excited state rotation, has the unfortunate consequence of producing large ground state barriers which dramatically decrease the overall rate of rotation. These molecular scale ultrafast motors have only recently been studied by ultrafast spectroscopy. Our lab has studied the photochemistry and photophysics of a ``first generation'' molecular motor with UV-visible transient absorption spectroscopy. We hope to use optical pulse shaping to enhance the efficiency and turnover rate of these molecular motors.

STS-98 crew takes part in Multi-Equipment Interface Test.

NASA Technical Reports Server (NTRS)

2000-01-01

In the Space Station Processing Facility, STS-98 Mission Specialist Thomas D. Jones (Ph.D.) looks over documents as part of a Multi-Equipment Interface Test (MEIT) on the U.S. Lab Destiny. Other crew members taking part in the MEIT are Commander Kenneth D. Cockrell and Pilot Mark Polansky. The remaining members of the crew (not present for the MEIT) are and Mission Specialists Robert L. Curbeam Jr. and Marsha S. Ivins. During the STS-98 mission, the crew will install the Lab on the International Space Station during a series of three space walks. The mission will provide the station with science research facilities and expand its power, life support and control capabilities. The U.S. Laboratory Module continues a long tradition of microgravity materials research, first conducted by Skylab and later Shuttle and Spacelab missions. Destiny is expected to be a major feature in future research, providing facilities for biotechnology, fluid physics, combustion, and life sciences research. The Lab is planned for launch aboard Space Shuttle Atlantis on the sixth ISS flight, currently targeted no earlier than Aug. 19, 2000.

STS-98 crew takes part in Multi-Equipment Interface Test.

NASA Technical Reports Server (NTRS)

2000-01-01

In the Space Station Processing Facility, STS-98 Mission Specialist Thomas D. Jones (Ph.D.) looks up at the U.S. Lab Destiny with its debris shield blanket made of a material similar to that used in bullet-proof vests on Earth.. Along with Commander Kenneth D. Cockrell and Pilot Mark Polansky, Jones is taking part in a Multi-Equipment Interface Test (MEIT) on this significant element of the International Space Station. During the STS-98 mission, the crew will install the Lab on the station during a series of three space walks. The mission will provide the station with science research facilities and expand its power, life support and control capabilities. The U.S. Laboratory Module continues a long tradition of microgravity materials research, first conducted by Skylab and later Shuttle and Spacelab missions. Destiny is expected to be a major feature in future research, providing facilities for biotechnology, fluid physics, combustion, and life sciences research. The Lab is planned for launch aboard Space Shuttle Atlantis on the sixth ISS flight, currently targeted no earlier than Aug. 19, 2000.

STS-98 crew takes part in Multi-Equipment Interface Test.

NASA Technical Reports Server (NTRS)

2000-01-01

In the Space Station Processing Facility, STS-98 Mission Specialist Thomas D. Jones (Ph.D.) looks at electrical connections on the U.S. Lab Destiny as part of a Multi-Equipment Interface Test (MEIT). Other crew members taking part in the MEIT are Commander Kenneth D. Cockrell and Pilot Mark Polansky. The remaining members of the crew (not present for the MEIT) are Mission Specialists Robert L. Curbeam Jr. and Marsha S. Ivins. During the STS-98 mission, the crew will install the Lab on the International Space Station during a series of three space walks. The mission will provide the station with science research facilities and expand its power, life support and control capabilities. The U.S. Laboratory Module continues a long tradition of microgravity materials research, first conducted by Skylab and later Shuttle and Spacelab missions. Destiny is expected to be a major feature in future research, providing facilities for biotechnology, fluid physics, combustion, and life sciences research. The Lab is planned for launch aboard Space Shuttle Atlantis on the sixth ISS flight, currently targeted no earlier than Aug. 19, 2000.

STS-98 crew takes part in Multi-Equipment Interface Test.

NASA Technical Reports Server (NTRS)

2000-01-01

During a Multi-Equipment Interface Test (MEIT) in the U.S. Lab Destiny, which is in the Space Station Processing Facility, astronaut James Voss (left) joins STS-98 Pilot Mark Polansky (center) and Commander Kenneth D. Cockrell (right) in checking wiring against documentation on the floor. Also participating in the MEIT is Mission Specialist Thomas D. Jones (Ph.D.). Voss is assigned to mission STS-102 as part of the second crew to occupy the International Space Station. During the STS-98 mission, the crew will install the Lab on the station during a series of three space walks. The mission will provide the station with science research facilities and expand its power, life support and control capabilities. The U.S. Laboratory Module continues a long tradition of microgravity materials research, first conducted by Skylab and later Shuttle and Spacelab missions. Destiny is expected to be a major feature in future research, providing facilities for biotechnology, fluid physics, combustion, and life sciences research. The Lab is planned for launch aboard Space Shuttle Atlantis on the sixth ISS flight, currently targeted no earlier than Aug. 19, 2000.

KSC-00pp0181

NASA Image and Video Library

2000-02-03

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility, STS-98 Mission Specialist Thomas D. Jones (Ph.D.) looks up at the U.S. Lab Destiny with its debris shield blanket made of a material similar to that used in bullet-proof vests on Earth. Along with Commander Kenneth D. Cockrell and Pilot Mark Polansky, Jones is taking part in a Multi-Equipment Interface Test (MEIT) on this significant element of the International Space Station. During the STS-98 mission, the crew will install the Lab on the Station during a series of three spacewalks. The mission will provide the Station with science research facilities and expand its power, life support and control capabilities. The U.S. Laboratory Module continues a long tradition of microgravity materials research, first conducted by Skylab and later Shuttle and Spacelab missions. Destiny is expected to be a major feature in future research, providing facilities for biotechnology, fluid physics, combustion and life sciences reseach. The Lab is planned for launch aboard Space Shuttle Atlantis on the sixth ISS flight, currently targeted no earlier than August 19, 2000.

KSC00pp0181

NASA Image and Video Library

2000-02-03

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility, STS-98 Mission Specialist Thomas D. Jones (Ph.D.) looks up at the U.S. Lab Destiny with its debris shield blanket made of a material similar to that used in bullet-proof vests on Earth. Along with Commander Kenneth D. Cockrell and Pilot Mark Polansky, Jones is taking part in a Multi-Equipment Interface Test (MEIT) on this significant element of the International Space Station. During the STS-98 mission, the crew will install the Lab on the Station during a series of three spacewalks. The mission will provide the Station with science research facilities and expand its power, life support and control capabilities. The U.S. Laboratory Module continues a long tradition of microgravity materials research, first conducted by Skylab and later Shuttle and Spacelab missions. Destiny is expected to be a major feature in future research, providing facilities for biotechnology, fluid physics, combustion and life sciences reseach. The Lab is planned for launch aboard Space Shuttle Atlantis on the sixth ISS flight, currently targeted no earlier than August 19, 2000.

KSC-00pp0180

NASA Image and Video Library

2000-02-03

In the Space Station Processing Facility, STS-98 Mission Specialist Thomas D. Jones (Ph.D.) looks at electrical connections on the U.S. Lab Destiny as part of a Multi-Equipment Interface Test (MEIT). Other crew members taking part in the MEIT are Commander Kenneth D. Cockrell and Pilot Mark Polansky. The remaining members of the crew (not present for the MEIT) are Mission Specialists Robert L. Curbeam Jr. and Marsha S. Ivins. During the STS-98 mission, the crew will install the Lab on the International Space Station during a series of three space walks. The mission will provide the station with science research facilities and expand its power, life support and control capabilities. The U.S. Laboratory Module continues a long tradition of microgravity materials research, first conducted by Skylab and later Shuttle and Spacelab missions. Destiny is expected to be a major feature in future research, providing facilities for biotechnology, fluid physics, combustion, and life sciences research. The Lab is planned for launch aboard Space Shuttle Atlantis on the sixth ISS flight, currently targeted no earlier than Aug. 19, 2000

Effect of lauric acid and coconut oil on ruminal fermentation, digestion, ammonia losses from manure, and milk fatty acid composition in lactating cows.

PubMed

Hristov, A N; Vander Pol, M; Agle, M; Zaman, S; Schneider, C; Ndegwa, P; Vaddella, V K; Johnson, K; Shingfield, K J; Karnati, S K R

2009-11-01

This experiment (replicated 3 x 3 Latin square design) was conducted to investigate the effects of lauric acid (LA) or coconut oil (CO) on ruminal fermentation, nutrient digestibility, ammonia losses from manure, and milk fatty acid (FA) composition in lactating cows. Treatments consisted of intraruminal doses of 240 g of stearic acid/d (SA; control), 240 g of LA/d, or 530 g of CO/d administered once daily, before feeding. Between periods, cows were inoculated with ruminal contents from donor cows and allowed a 7-d recovery period. Treatment did not affect dry matter intake, milk yield, or milk composition. Ruminal pH was slightly increased by CO compared with the other treatments, whereas LA and CO decreased ruminal ammonia concentration compared with SA. Both LA and CO decreased protozoal counts by 80% or more compared with SA. Methane production rate in the rumen was reduced by CO compared with LA and SA, with no differences between LA and SA. Treatments had no effect on total tract apparent dry matter, organic matter, N, and neutral detergent fiber digestibility coefficients or on cumulative (15 d) in vitro ammonia losses from manure. Compared with SA, LA and CO increased milk fat 12:0, cis-9 12:1, and trans-9 12:1 content and decreased 6:0, 8:0, 10:0, cis-9 10:1, 16:0, 18:0, cis 18:1, total 18:2, 18:3 n-3 and total polyunsaturated FA concentrations. Administration of LA and 14:0 (as CO) in the rumen were apparently transferred into milk fat with a mean efficiency of 18 and 15%, respectively. In conclusion, current data confirmed that LA and CO exhibit strong antiprotozoal activity when dosed intraruminally, an effect that is accompanied by decreases in ammonia concentration and, for CO, lowered methane production. Administration of LA and CO in the rumen also altered milk FA composition.

Spike-train acquisition, analysis and real-time experimental control using a graphical programming language (LabView).

PubMed

Nordstrom, M A; Mapletoft, E A; Miles, T S

1995-11-01

A solution is described for the acquisition on a personal computer of standard pulses derived from neuronal discharge, measurement of neuronal discharge times, real-time control of stimulus delivery based on specified inter-pulse interval conditions in the neuronal spike train, and on-line display and analysis of the experimental data. The hardware consisted of an Apple Macintosh IIci computer and a plug-in card (National Instruments NB-MIO16) that supports A/D, D/A, digital I/O and timer functions. The software was written in the object-oriented graphical programming language LabView. Essential elements of the source code of the LabView program are presented and explained. The use of the system is demonstrated in an experiment in which the reflex responses to muscle stretch are assessed for a single motor unit in the human masseter muscle.

Absorptivity of semiconductors used in the production of solar cell panels

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kosyachenko, L. A., E-mail: lakos@chv.ukrpack.net; Grushko, E. V.; Mikityuk, T. I.

The dependence of the absorptivity of semiconductors on the thickness of the absorbing layer is studied for crystalline silicon (c-Si), amorphous silicon (a-Si), cadmium telluride (CdTe), copper indium diselenide (CuInSe{sub 2}, CIS), and copper gallium diselenide (CuGaSe{sub 2}, CGS). The calculations are performed with consideration for the spectral distribution of AM1.5 standard solar radiation and the absorption coefficients of the materials. It is shown that, in the region of wavelengths {lambda} = {lambda}{sub g} = hc/E{sub g}, almost total absorption of the photons in AM1.5 solar radiation is attained in c-Si at the thickness d = 7-8 mm, in a-Simore » at d = 30-60 {mu}m, in CdTe at d = 20-30 {mu}m, and in CIS and CGS at d = 3-4 {mu}m. The results differ from previously reported data for these materials (especially for c-Si). In previous publications, the thickness needed for the semiconductor to absorb solar radiation completely was identified with the effective light penetration depth at a certain wavelength in the region of fundamental absorption for the semiconductor.« less

User Education in the Online Age II. IATUL International Seminar Proceedings, (2nd, Delft, The Netherlands, July 30-August 2, 1984). Vol. 17.

ERIC Educational Resources Information Center

Fjallbrant, Nancy, Ed.

1985-01-01

Papers presented at an August 1984 international seminar on online user education include "Library Policies and Strategies in The Netherlands" (Chris J. van Wijk, The Netherlands); "Promotion and Marketing of Library Services" (Nancy Fjallbrant, Sweden); "Library Promotion by Computer" (Ian Malley, United Kingdom); "Library User Education and…

Operational Management System for Regulated Water Systems

NASA Astrophysics Data System (ADS)

van Loenen, A.; van Dijk, M.; van Verseveld, W.; Berger, H.

2012-04-01

Most of the Dutch large rivers, canals and lakes are controlled by the Dutch water authorities. The main reasons concern safety, navigation and fresh water supply. Historically the separate water bodies have been controlled locally. For optimizating management of these water systems an integrated approach was required. Presented is a platform which integrates data from all control objects for monitoring and control purposes. The Operational Management System for Regulated Water Systems (IWP) is an implementation of Delft-FEWS which supports operational control of water systems and actively gives advice. One of the main characteristics of IWP is that is real-time collects, transforms and presents different types of data, which all add to the operational water management. Next to that, hydrodynamic models and intelligent decision support tools are added to support the water managers during their daily control activities. An important advantage of IWP is that it uses the Delft-FEWS framework, therefore processes like central data collection, transformations, data processing and presentation are simply configured. At all control locations the same information is readily available. The operational water management itself gains from this information, but it can also contribute to cost efficiency (no unnecessary pumping), better use of available storage and advise during (water polution) calamities.

Johannes Vermeer of Delft [1632-1675] and vision in neuroendoscopy

PubMed Central

Azab, Waleed A.; Prevedello, Daniel M.; Carrau, Ricardo L.

2014-01-01

Background: Johannes Vermeer of Delft [1632-1675] was one of the greatest Masters of the Dutch Golden Age who was intensely preoccupied with the behavior of light and other optical effects and was entitled “The Master of Light”. He fastidiously attended to the subtleties of visual expression through geometry, composition, and precise mastery of the rules of perspective. It has been our impression that some visual similarity does exist between neuroendoscopic images and some of Vermeer's paintings. Such a relation could be explained by the fact that optical devices are utilized in producing both types of display. Methods: We reviewed the pertinent medical and art literature, observed some video clips of our endoscopy cases, and inspected digital high resolution images of Vermeer's paintings in order to elaborate on shared optical phenomena between neuroendoscopic views and Vermeer's paintings. Results: Specific optical phenomena are indeed shared by Johannes Vermeer's works and neuroendoscopic vision, namely light and color effects as well as the rules of perspective. Conclusion: From the physical point of view, the possibility that a camera obscura inspired Vermeer's artistic creation makes the existence of a visual link between his paintings and the endoscopic views of the intracranial cavity comprehensible. PMID:25140282

Research-grade CMOS image sensors for demanding space applications

NASA Astrophysics Data System (ADS)

Saint-Pé, Olivier; Tulet, Michel; Davancens, Robert; Larnaudie, Franck; Magnan, Pierre; Corbière, Franck; Martin-Gonthier, Philippe; Belliot, Pierre

2004-06-01

Imaging detectors are key elements for optical instruments and sensors on board space missions dedicated to Earth observation (high resolution imaging, atmosphere spectroscopy...), Solar System exploration (micro cameras, guidance for autonomous vehicle...) and Universe observation (space telescope focal planes, guiding sensors...). This market has been dominated by CCD technology for long. Since the mid-90s, CMOS Image Sensors (CIS) have been competing with CCDs for more and more consumer domains (webcams, cell phones, digital cameras...). Featuring significant advantages over CCD sensors for space applications (lower power consumption, smaller system size, better radiations behaviour...), CMOS technology is also expanding in this field, justifying specific R&D and development programs funded by national and European space agencies (mainly CNES, DGA, and ESA). All along the 90s and thanks to their increasingly improving performances, CIS have started to be successfully used for more and more demanding applications, from vision and control functions requiring low-level performances to guidance applications requiring medium-level performances. Recent technology improvements have made possible the manufacturing of research-grade CIS that are able to compete with CCDs in the high-performances arena. After an introduction outlining the growing interest of optical instruments designers for CMOS image sensors, this talk will present the existing and foreseen ways to reach high-level electro-optics performances for CIS. The developments of CIS prototypes built using an imaging CMOS process and of devices based on improved designs will be presented.

Research-grade CMOS image sensors for demanding space applications

NASA Astrophysics Data System (ADS)

Saint-Pé, Olivier; Tulet, Michel; Davancens, Robert; Larnaudie, Franck; Magnan, Pierre; Corbière, Franck; Martin-Gonthier, Philippe; Belliot, Pierre

2017-11-01

Imaging detectors are key elements for optical instruments and sensors on board space missions dedicated to Earth observation (high resolution imaging, atmosphere spectroscopy...), Solar System exploration (micro cameras, guidance for autonomous vehicle...) and Universe observation (space telescope focal planes, guiding sensors...). This market has been dominated by CCD technology for long. Since the mid- 90s, CMOS Image Sensors (CIS) have been competing with CCDs for more and more consumer domains (webcams, cell phones, digital cameras...). Featuring significant advantages over CCD sensors for space applications (lower power consumption, smaller system size, better radiations behaviour...), CMOS technology is also expanding in this field, justifying specific R&D and development programs funded by national and European space agencies (mainly CNES, DGA, and ESA). All along the 90s and thanks to their increasingly improving performances, CIS have started to be successfully used for more and more demanding applications, from vision and control functions requiring low-level performances to guidance applications requiring medium-level performances. Recent technology improvements have made possible the manufacturing of research-grade CIS that are able to compete with CCDs in the high-performances arena. After an introduction outlining the growing interest of optical instruments designers for CMOS image sensors, this talk will present the existing and foreseen ways to reach high-level electro-optics performances for CIS. The developments of CIS prototypes built using an imaging CMOS process and of devices based on improved designs will be presented.

Bifunctional cis-Abienol Synthase from Abies balsamea Discovered by Transcriptome Sequencing and Its Implications for Diterpenoid Fragrance Production*

PubMed Central

Zerbe, Philipp; Chiang, Angela; Yuen, Macaire; Hamberger, Björn; Hamberger, Britta; Draper, Jason A.; Britton, Robert; Bohlmann, Jörg

2012-01-01

The labdanoid diterpene alcohol cis-abienol is a major component of the aromatic oleoresin of balsam fir (Abies balsamea) and serves as a valuable bioproduct material for the fragrance industry. Using high-throughput 454 transcriptome sequencing and metabolite profiling of balsam fir bark tissue, we identified candidate diterpene synthase sequences for full-length cDNA cloning and functional characterization. We discovered a bifunctional class I/II cis-abienol synthase (AbCAS), along with the paralogous levopimaradiene/abietadiene synthase and isopimaradiene synthase, all of which are members of the gymnosperm-specific TPS-d subfamily. The AbCAS-catalyzed formation of cis-abienol proceeds via cyclization and hydroxylation at carbon C-8 of a postulated carbocation intermediate in the class II active site, followed by cleavage of the diphosphate group and termination of the reaction sequence without further cyclization in the class I active site. This reaction mechanism is distinct from that of synthases of the isopimaradiene- or levopimaradiene/abietadiene synthase type, which employ deprotonation reactions in the class II active site and secondary cyclizations in the class I active site, leading to tricyclic diterpenes. Comparative homology modeling suggested the active site residues Asp-348, Leu-617, Phe-696, and Gly-723 as potentially important for the specificity of AbCAS. As a class I/II bifunctional enzyme, AbCAS is a promising target for metabolic engineering of cis-abienol production. PMID:22337889

Encouraging entrepreneurship in university labs: Research activities, research outputs, and early doctorate careers

PubMed Central

2017-01-01

This paper investigates how the encouragement of entrepreneurship within university research labs relates with research activities, research outputs, and early doctorate careers. Utilizing a panel survey of 6,840 science & engineering doctoral students at 39 R1 research universities, this study shows that entrepreneurship is widely encouraged across university research labs, ranging from 54% in biomedical engineering to 18% in particle physics, while only a small share of labs openly discourage entrepreneurship, from approximately 3% in engineering to approximately 12% in the life sciences. Within fields, there is no difference between labs that encourage entrepreneurship and those that do not with respect to basic research activity and the number of publications. At the same time, labs that encourage entrepreneurship are significantly more likely to report invention disclosures, particularly in engineering where such labs are 41% more likely to disclose inventions. With respect to career pathways, PhDs students in labs that encourage entrepreneurship do not differ from other PhDs in their interest in academic careers, but they are 87% more likely to be interested in careers in entrepreneurship and 44% more likely to work in a startup after graduation. These results persist even when accounting for individuals’ pre-PhD interest in entrepreneurship and the encouragement of other non-academic industry careers. PMID:28178270

Encouraging entrepreneurship in university labs: Research activities, research outputs, and early doctorate careers.

PubMed

Roach, Michael

2017-01-01

This paper investigates how the encouragement of entrepreneurship within university research labs relates with research activities, research outputs, and early doctorate careers. Utilizing a panel survey of 6,840 science & engineering doctoral students at 39 R1 research universities, this study shows that entrepreneurship is widely encouraged across university research labs, ranging from 54% in biomedical engineering to 18% in particle physics, while only a small share of labs openly discourage entrepreneurship, from approximately 3% in engineering to approximately 12% in the life sciences. Within fields, there is no difference between labs that encourage entrepreneurship and those that do not with respect to basic research activity and the number of publications. At the same time, labs that encourage entrepreneurship are significantly more likely to report invention disclosures, particularly in engineering where such labs are 41% more likely to disclose inventions. With respect to career pathways, PhDs students in labs that encourage entrepreneurship do not differ from other PhDs in their interest in academic careers, but they are 87% more likely to be interested in careers in entrepreneurship and 44% more likely to work in a startup after graduation. These results persist even when accounting for individuals' pre-PhD interest in entrepreneurship and the encouragement of other non-academic industry careers.

Molecular characterization of long direct repeat (LDR) sequences expressing a stable mRNA encoding for a 35-amino-acid cell-killing peptide and a cis-encoded small antisense RNA in Escherichia coli.

PubMed

Kawano, Mitsuoki; Oshima, Taku; Kasai, Hiroaki; Mori, Hirotada

2002-07-01

Genome sequence analyses of Escherichia coli K-12 revealed four copies of long repetitive elements. These sequences are designated as long direct repeat (LDR) sequences. Three of the repeats (LDR-A, -B, -C), each approximately 500 bp in length, are located as tandem repeats at 27.4 min on the genetic map. Another copy (LDR-D), 450 bp in length and nearly identical to LDR-A, -B and -C, is located at 79.7 min, a position that is directly opposite the position of LDR-A, -B and -C. In this study, we demonstrate that LDR-D encodes a 35-amino-acid peptide, LdrD, the overexpression of which causes rapid cell killing and nucleoid condensation of the host cell. Northern blot and primer extension analysis showed constitutive transcription of a stable mRNA (approximately 370 nucleotides) encoding LdrD and an unstable cis-encoded antisense RNA (approximately 60 nucleotides), which functions as a trans-acting regulator of ldrD translation. We propose that LDR encodes a toxin-antitoxin module. LDR-homologous sequences are not pre-sent on any known plasmids but are conserved in Salmonella and other enterobacterial species.

0–0 Energies Using Hybrid Schemes: Benchmarks of TD-DFT, CIS(D), ADC(2), CC2, and BSE/GW formalisms for 80 Real-Life Compounds

PubMed Central

2015-01-01

The 0–0 energies of 80 medium and large molecules have been computed with a large panel of theoretical formalisms. We have used an approach computationally tractable for large molecules, that is, the structural and vibrational parameters are obtained with TD-DFT, the solvent effects are accounted for with the PCM model, whereas the total and transition energies have been determined with TD-DFT and with five wave function approaches accounting for contributions from double excitations, namely, CIS(D), ADC(2), CC2, SCS-CC2, and SOS-CC2, as well as Green’s function based BSE/GW approach. Atomic basis sets including diffuse functions have been systematically applied, and several variations of the PCM have been evaluated. Using solvent corrections obtained with corrected linear-response approach, we found that three schemes, namely, ADC(2), CC2, and BSE/GW allow one to reach a mean absolute deviation smaller than 0.15 eV compared to the measurements, the two former yielding slightly better correlation with experiments than the latter. CIS(D), SCS-CC2, and SOS-CC2 provide significantly larger deviations, though the latter approach delivers highly consistent transition energies. In addition, we show that (i) ADC(2) and CC2 values are extremely close to each other but for systems absorbing at low energies; (ii) the linear-response PCM scheme tends to overestimate solvation effects; and that (iii) the average impact of nonequilibrium correction on 0–0 energies is negligible. PMID:26574326

High-resolution synchrotron FTIR spectroscopic analysis of the Coriolis interaction between the v10 = 1 and v8 = 1 states of ethylene-cis-1,2-d2

NASA Astrophysics Data System (ADS)

Ng, L. L.; Tan, T. L.; Wong, Andy; Appadoo, Dominique R. T.; McNaughton, Don

2016-10-01

The synchrotron Fourier transform infrared (FTIR) spectrum of the b-type ν10 band of ethylene-cis-1,2-d2 (cis-C2H2D2) was recorded at a resolution of 0.00096 cm-1 in the 550-750 cm-1 region. The measured FWHM of the lines was about 0.002 cm-1. The ν10 band, centred at 662.871885(27) cm-1 was found to be perturbed through a b-type Coriolis resonance with the infrared inactive ν8 at 759.9582(20) cm-1. In this work, 1989 infrared transitions of ν10 were assigned for the first time. These perturbed and unperturbed infrared transitions were fitted with an rms deviation of 0.00033 cm-1 using the Watson's A-reduced Hamiltonian in the Ir representation with three Coriolis terms to derive the rovibrational constants for v10 = 1 and v8 = 1 states. Ground state rovibrational constants up to two sextic terms were also derived from a fit of a total of 2532 ground state combination differences with arms deviation of 0.00030 cm-1 from the infrared transitions of the present analysis and those determined previously. The ground state constants compared favourably to the equilibrium state constants from harmonic cc-pVTZ basis set at CCSD(T), MP2 and B3LYP levels. The rotational constants of ν10 and ν8 from this work agree well with those from anharmonic calculations.

Effects of lattice morphology upon reaction dynamics in matrix-isolated systems

NASA Astrophysics Data System (ADS)

Raff, Lionel M.

1992-11-01

The dynamics of the cis-d2-ethylene+F2 addition reaction and the subsequent reaction dynamics of the products isolated in vapor-deposited Ar matrices at 12 K are investigated using trajectory methods that incorporate nonstatistical sampling to enhance the reaction probabilities. The matrix-isolated cis-d2-ethylene+F2 system is generated using a combination of Monte Carlo, damped trajectory, and volume contraction methods. Transport effects of the bulk are simulated using the velocity reset procedure developed by Riley et al. [J. Chem. Phys. 88, 5934 (1988)]. The potential-energy hypersurface is the same as that employed in our previous investigations of the matrix-isolated, decomposition dynamics of 1,2-difluoroethane-d4 and the bimolecular cis-d2-ethylene+F2 system in face-centered-cubic (fcc) matrices [J. Chem. Phys. 93, 3160 (1990); 95, 8901 (1991)]. It is found that matrices generated by these methods are amorphous with numerous vacancies and other imperfections. On the average, there are approximately three vacancies about each lattice atom compared to the fcc crystal. The calculated lattice density is about 82% that for a bulk fcc Ar solid. Computed radial distribution functions resemble those expected for a liquid which exhibits some short-range order. The imperfections of the lattice remain even after substantial annealing at 50 K. The calculated energy relaxation rate to the lattice phonon modes in these amorphous matrices is about a factor of 4 less than that for a close-packed fcc lattice. The 1,2-difluoroethane product is formed primarily via an αβ-addition process, as is the case for fcc matrices. However, the prominence of this pathway is greatly reduced. The major process leading to a fluoroethylene elimination product in amorphous matrices involves an atomic addition mechanism. Such a reaction path accounts for 94% of the elimination reactions. The probability of internal rotation about the C■C double bond in the fluoroethylene product is increased fivefold over that for fcc lattices. The calculated stabilization/elimination product ratio, the cis/trans ratios of fluoroethylene products, and the HF/DF elimination ratio are all found to be in fair to good accord with the reported experimental data. It is concluded that accurate simulation of matrix-isolation experiments requires a matrix model that properly represents the lattice structure present in the experiments.

Modular 3D printed lab-on-a-chip bio-reactor for the biochemical energy cascade of microorganisms

NASA Astrophysics Data System (ADS)

Podwin, Agnieszka; Dziuban, Jan A.

2017-10-01

The paper presents the sandwiched polymer 3D printed lab-on-a-chip bio-reactor for the biochemical energy cascade of microorganisms. Euglenas and yeast were separately and simultaneously cultured for 10 d in the chip. As a result of the experiments, euglenas, light-initialized and nourished by CO2—a product of ethanol fermentation handled by yeast—generated oxygen, based on the photosynthesis process. The presence of oxygen in the bio-reactor was confirmed by the colorimetric method—a bicarbonate (pH) indicator. Preliminary studies towards the obtainment of an effective source of oxygen are promising and further research should be done to enable the utility of the bio-reactor in, for instance, microbial fuel cells.

High-resolution 3D imaging of polymerized photonic crystals by lab-based x-ray nanotomography with 50-nm resolution

NASA Astrophysics Data System (ADS)

Yin, Leilei; Chen, Ying-Chieh; Gelb, Jeff; Stevenson, Darren M.; Braun, Paul A.

2010-09-01

High resolution x-ray computed tomography is a powerful non-destructive 3-D imaging method. It can offer superior resolution on objects that are opaque or low contrast for optical microscopy. Synchrotron based x-ray computed tomography systems have been available for scientific research, but remain difficult to access for broader users. This work introduces a lab-based high-resolution x-ray nanotomography system with 50nm resolution in absorption and Zernike phase contrast modes. Using this system, we have demonstrated high quality 3-D images of polymerized photonic crystals which have been analyzed for band gap structures. The isotropic volumetric data shows excellent consistency with other characterization results.

Structural characterization of two novel potential anticholinesterasic agents

NASA Astrophysics Data System (ADS)

Oliveira, Paulo R.; Wiectzycosky, Franciele; Basso, Ernani A.; Gonçalves, Regina A. C.; Pontes, Rodrigo M.

2003-09-01

Two novel compounds with possible anticholinesterase activity have been synthesized containing a carbamate and a dimethylamine group in 1,2-positions of a cyclohexane ring ( cis and trans isomers). Conformer populations were established by a combination of NMR 1H coupling constant analysis and DFT (B3LYP/6-311+G(d,p)) calculations. 13C chemical shifts were calculated in order to confirm signal attributions. The cis isomer adopts a conformation in which the carbamate group lies at the axial position (>99%), whereas the trans isomer adopts a diequatorial arrangement (98%). These preferences have been explained in terms of syn-1,3-diaxial interactions of the individual groups.

A numerical model investigation of the formation and persistence of an erosion hotspot

USGS Publications Warehouse

Hansen, Jeff E.; Elias, Edwin; List, Jeffrey H.; Barnard, Patrick L.

2011-01-01

A Delft3D-SWAN coupled flow and wave model was constructed for the San Francisco Bight with high-resolution at 7 km-long Ocean Beach, a high-energy beach located immediately south of the Golden Gate, the sole entrance to San Francisco Bay. The model was used to investigate tidal and wave-induced flows, basic forcing terms, and potential sediment transport in an area in the southern portion of Ocean Beach that has eroded significantly over the last several decades. The model predicted flow patterns that were favorable for sediment removal from the area and net erosion from the surf-zone. Analysis of the forcing terms driving surf-zone flows revealed that wave refraction over an exposed wastewater outfall pipe between the 12 and 15 m isobaths introduces a perturbation in the wave field that results in erosion-causing flows. Modeled erosion agreed well with five years of topographic survey data from the area.

Littoral transport rates in the Santa Barbara Littoral Cell: a process-based model analysis

USGS Publications Warehouse

Elias, E. P. L.; Barnard, Patrick L.; Brocatus, John

2009-01-01

Identification of the sediment transport patterns and pathways is essential for sustainable coastal zone management of the heavily modified coastline of Santa Barbara and Ventura County (California, USA). A process-based model application, based on Delft3D Online Morphology, is used to investigate the littoral transport potential along the Santa Barbara Littoral Cell (between Point Conception and Mugu Canyon). An advanced optimalization procedure is applied to enable annual sediment transport computations by reducing the ocean wave climate in 10 wave height - direction classes. Modeled littoral transport rates compare well with observed dredging volumes, and erosion or sedimentation hotspots coincide with the modeled divergence and convergence of the transport gradients. Sediment transport rates are strongly dependent on the alongshore variation in wave height due to wave sheltering, diffraction and focusing by the Northern Channel Islands, and the local orientation of the geologically-controlled coastline. Local transport gradients exceed the net eastward littoral transport, and are considered a primary driver for hot-spot erosion.

Crevasse Splays Versus Avulsions: A Recipe for Land Building With Levee Breaches

NASA Astrophysics Data System (ADS)

Nienhuis, Jaap H.; Törnqvist, Torbjörn E.; Esposito, Christopher R.

2018-05-01

Natural-levee breaches can not only initiate an avulsion but also, under the right circumstances, lead to crevasse splay formation and overbank sedimentation. The formative conditions for crevasse splays are not well understood, yet such river sediment diversions form an integral part of billion-dollar coastal restoration projects. Here we use Delft3D to investigate the influence of vegetation and soil consolidation on the evolution of a natural-levee breach. Model simulations show that crevasse splays heal because floodplain aggradation reduces the water surface slope, decreasing water discharge into the flood basin. Easily erodible and unvegetated floodplains increase the likelihood for channel avulsions. Denser vegetation and less potential for soil consolidation result in small crevasse splays that are not only efficient sediment traps but also short-lived. Successful crevasse splays that generate the largest land area gain for the imported sediment require a delicate balance between water and sediment discharge, vegetation root strength, and soil consolidation.

U.S. Army’s Ground Vehicle Energy Storage R&D Programs & Goals

DTIC Science & Technology

2010-11-10

STATEMENT Approved for public release; distribution unlimited 13. SUPPLEMENTARY NOTES Briefing to ARPA-E BEEST Meeting 14. ABSTRACT NA 15...Program Collaboration & DOD Customers DOE Material Developers Battery Developers ANL USABC National Labs Universities Industrial Developers...qualification for military lead acid batteries; 6 water baths, 31 circuits, 1 thermal chamber • Electrochemical Research & Analysis Lab (EARL

Fermilab Education: Data-based Investigations

Science.gov Websites

Cosmic Rays Study cosmic rays with data from classrooom cosmic ray detectors. CMS e-Lab Study CMS Data using the CMS e-Lab from I2U2. LIGO Study seismic activity with data from LIGO (Laser Interferometer data from D0 - an example of conservation of momentum. Sky Server Study data from the Sloan Digital Sky

Implementing an Automated Antenna Measurement System

NASA Technical Reports Server (NTRS)

Valerio, Matthew D.; Romanofsky, Robert R.; VanKeuls, Fred W.

2003-01-01

We developed an automated measurement system using a PC running a LabView application, a Velmex BiSlide X-Y positioner, and a HP85l0C network analyzer. The system provides high positioning accuracy and requires no user supervision. After the user inputs the necessary parameters into the LabView application, LabView controls the motor positioning and performs the data acquisition. Current parameters and measured data are shown on the PC display in two 3-D graphs and updated after every data point is collected. The final output is a formatted data file for later processing.

Potency of microfiltration membrane process in purifying broccoli (Brassica oleracea L.) fermented by lactic acid bacteria (LAB) as functional food

NASA Astrophysics Data System (ADS)

Susilowati, Agustine; Aspiyanto, Maryati, Yati; Melanie, Hakiki; Lotulung, Puspa D.

2017-01-01

Purifying broccoli (Brassica oleracea L.) fermented by Lactic Acid Bacteria (LAB) using mixture of L. bulgaricus, S. thermopillus, L. acidophillusand Bifidobacteriumbifidum and fructooligosaccharides (FOS) as carbon source have been performed to recover biomass concentrate for probiotic and antioxidant. Purification of fermented broccoli was conducted through microfiltration (MF) membrane of 0.15 µm at stirrer rotation speed 400 rpm, room temperature and pressure 40 psia for 30 minutes. Fermented broccoli produced via fermentation process with fermentation time 0 (initial) and 48 hours, and LAB concentration 10% and 20% (v/v) represented as biomass of A, B, C and D. The experimental result showed that based on selectivity of total organic acids, separating optimization was achieved at biomass D (fermentation time 48 hours and mixed LAB culture concentration 20%). Concentrate composition produced in this condition were total acids 6.04%, total solids 24.31%, total polyphenol 0.0252%, reducing sugar 68.25 mg/mL, total sugars 30.89 mg/mL, and dissolved protein 28.54 mg/mL with pH 3.94. In this condition, recovery of biomass concentrate of D for total acids 5.64 folds, total solids 1.82 folds, total polyphenol 3.03 folds, reducing sugar 1.16 folds, total sugars 1.19 folds, and dissolved protein 0.67 folds compared with feed (initial process). Identification of monomer of biomass concentrate D as polyphenol derivatives at T2,01 and T3.01 gave monomer with molecular weight (MW) 192.78 Dalton (Da.), and monomer with MW 191.08, 191.49 and 192.07 Da., while lactic acid derivatives showed MW 251.13, 251.6 and 252.14, and monomer with MW 250.63, 252.14 and 254.22 Da.

Screening and characterization of extracellular polysaccharides produced by Leuconostoc kimchii isolated from traditional fermented pulque beverage.

PubMed

Torres-Rodríguez, Ingrid; Rodríguez-Alegría, María Elena; Miranda-Molina, Alfonso; Giles-Gómez, Martha; Conca Morales, Rodrigo; López-Munguía, Agustín; Bolívar, Francisco; Escalante, Adelfo

2014-01-01

We report the screening and characterization of EPS produced by LAB identified as Leuconostoc kimchii isolated from pulque, a traditional Mexican fermented, non-distilled alcoholic beverage produced by the fermentation of the sap extracted from several (Agave) maguey species. EPS-producing LAB constitutes an abundant bacterial group relative to total LAB present in sap and during fermentation, however, only two EPS-producing colony phenotypes (EPSA and EPSB, respectively) were detected and isolated concluding that despite the high number of polymer-producing LAB their phenotypic diversity is low. Scanning electron microcopy analysis during EPS-producing conditions revealed that both types of EPS form a uniform porous structure surrounding the bacterial cells. The structural characterization of the soluble and cell-associated EPS fractions of each polymer by enzymatic and acid hydrolysis, as by 1D- and 2D-NMR, showed that polymers produced by the soluble and cell-associated fractions of EPSA strain are dextrans consisting of a linear backbone of linked α-(1→6) Glcp in the main chain with α-(1→2) and α-(1→3)-linked branches. The polymer produced by the soluble fraction of EPSB strain was identified as a class 1 dextran with a linear backbone containing consecutive α-(1→6)-linked D-glucopyranosyl units with few α-(1→3)-linked branches, whereas the cell-associated EPS is a polymer mixture consisting of a levan composed of linear chains of (2→6)-linked β-D-fructofuranosyl residues with β-(2→6) connections, and a class 1 dextran. According to our knowledge this is the first report of dextrans and a levan including their structural characterization produced by L. kimchii isolated from a traditional fermented source.

CuInSe2-Based Thin-Film Photovoltaic Technology in the Gigawatt Production Era

NASA Astrophysics Data System (ADS)

Kushiya, Katsumi

2012-10-01

The objective of this paper is to review current status and future prospect on CuInSe2 (CIS)-based thin-film photovoltaic (PV) technology. In CIS-based thin-film PV technology, total-area cell efficiency in a small-area (i.e., smaller than 1 cm2) solar cell with top grids has been over 20%, while aperture-area efficiency in a large-area (i.e., larger than 800 cm2 as definition) monolithic module is approaching to an 18% milestone. However, most of the companies with CIS-based thin-film PV technology still stay at a production research stage, except Solar Frontier K.K. In July, 2011, Solar Frontier has joined the gigawatt (GW) group by starting up their third facility with a 0.9-GW/year production capacity. They are keeping the closest position to pass a 16% module-efficiency border by transferring the developed technologies in the R&D and accelerating the preparation for the future based on the concept of a product life-cycle management.

Ensemble of Transition State Structures for the Cis-Trans Isomerization of N-Methylacetamide

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mantz, Yves A.; Branduardi, Davide; Bussi, Giovanni

2009-09-17

The cis-trans isomerization of N-methylacetamide (NMA), a model peptidic fragment, is studied theoretically in vacuo and in explicit water solvent at 300 K using the metadynamics technique. The computed cis-trans free energy difference is very similar for NMA(g) and NMA(aq), in agreement with experimental measurements of population ratios and theoretical studies at 0 K. By exploiting the flexibility in the definition of a pair of recently introduced collective variables (Branduardi, D.; Gervasio, F. L.; Parrinello, M. J. Chem. Phys. 2007, 126, 054103), an ensemble of transition state structures is generated at finite temperature for both NMA(g) and NMA(aq), as verifiedmore » by computing committor distribution functions. Ensemble members of NMA(g) are shown to have correlated values of the backbone dihedral angle and a second dihedral angle involving the amide hydrogen atom. The dynamical character of these structures is preserved in the presence of solvent, whose influence on the committor functions can be modeled using effective friction/noise terms.« less

Characterization of the Aldehydes and Their Transformations Induced by UV Irradiation and Air Exposure of White Guanxi Honey Pummelo (Citrus Grandis (L.) Osbeck) Essential Oil.

PubMed

Li, Li Jun; Hong, Peng; Chen, Feng; Sun, Hao; Yang, Yuan Fan; Yu, Xiang; Huang, Gao Ling; Wu, Li Ming; Ni, Hui

2016-06-22

Aldehydes are key aroma contributors of citrus essential oils. White Guanxi honey pummelo essential oil (WPEO) was investigated in its aldehyde constituents and their transformations induced by UV irradiation and air exposure by GC-MS, GC-O, and sensory evaluation. Nine aldehydes, i.e., octanal, nonanal, citronellal, decanal, trans-citral, cis-citral, perilla aldehyde, dodecanal, and dodecenal, were detected in WPEO. After treatment, the content of citronellal increased, but the concentrations of other aldehydes decreased. The aliphatic aldehydes were transformed to organic acids. Citral was transformed to neric acid, geranic acid, and cyclocitral. Aldehyde transformation caused a remarkable decrease in the minty, herbaceous, and lemon notes of WPEO. In fresh WPEO, β-myrcene, d-limonene, octanal, decanal, cis-citral, trans-citral, and dodecenal had the highest odor dilution folds. After the treatment, the dilution folds of decanal, cis-citral, trans-citral, and dodecenal decreased dramatically. This result provides information for the production and storage of aldehyde-containing products.

Meet EPA Scientist Heriberto Cabezas, Ph.D.

EPA Pesticide Factsheets

Heriberto Cabezas, Ph.D. is currently the Senior Science Advisor to the Sustainable Technology Division in EPA's National Risk Management Research Lab, where he works to advance the application of science and technologies to address sustainability.

Cluster-impact fusion, or beam-contaminant fusion? (abstract)a),b)

NASA Astrophysics Data System (ADS)

Lo, Daniel H.; Petrasso, Richard D.; Wenzel, Kevin W.

1992-10-01

Beuhler, Friedlander, and Friedman (BFF) reported anomalously huge D-D fusion rates while bombarding deuterated targets with (D2O)N+ clusters (N˜25-1000) accelerated to ≊325 keV [R. J. Beuhler et al., Phys. Rev. Lett. 63, 1292 (1989); R. J. Beuhler et al., J. Phys. Chem. 94, 7665 (1990)] [i.e., ≊0.3 keV lab energy for D in (D2O)100+]. However, from our analysis of BFF's fusion product spectra, we conclude that their D lab energy was ˜50 keV. Therefore, no gross anomalies exist. Also, from our analysis of the BFF beam-ranging experiments through 500 μg/cm2 of Au, we conclude that light-ion-beam contaminants (e.g., D+ of order 100 keV) have not been ruled out, and are the probable cause of their fusion reactions. This work was supported by LLNL Subcontract B116798, Department of Energy (DOE) Grant No. DE-FG02-91ER54109, DOE Magnetic Fusion Energy Technology Fellowship Program (D. H. Lo), and DOE Fusion Energy Postdoctoral Research Program (Kevin W. Wenzel).

A role of nucleus accumbens dopamine receptors in the nucleus accumbens core, but not shell, in fear prediction error.

PubMed

Li, Susan S Y; McNally, Gavan P

2015-08-01

Two experiments used an associative blocking design to study the role of dopamine receptors in the nucleus accumbens shell (AcbSh) and core (AcbC) in fear prediction error. Rats in the experimental groups were trained to a visual fear-conditioned stimulus (conditional stimulus [CS]) A in Stage I, whereas rats in the control groups were not. In Stage II, all rats received compound fear conditioning of the visual CSA and an auditory CSB. Rats were later tested for their fear responses to CSB. All rats received microinjections of saline or the D1-D2 receptor antagonist cis-(z)-flupenthixol prior to Stage II. These microinjections targeted either the AcbSh (Experiment 1) or the AcbC (Experiment 2). In each experiment, Stage I fear conditioning of CSA blocked fear learning to CSB. Microinjection of cis-(z)-flupenthixol (10 or 20 μg) into the AcbSh (Experiment 1) had no effect on fear learning or associative blocking. In contrast, microinjection of cis-(z)-flupenthixol (10 or 20 μg) into the AcbC (Experiment 2) attenuated blocking and so enabled fear learning to CSB. These results identify the AcbC as the critical locus for dopamine receptor contributions to fear prediction error and the associative blocking of fear learning. (c) 2015 APA, all rights reserved).

Bilateral Versus Unilateral Cochlear Implantation in Adult Listeners: Speech-On-Speech Masking and Multitalker Localization

PubMed Central

Buchholz, Jörg M.; Morgan, Catherine; Sharma, Mridula; Weller, Tobias; Konganda, Shivali Appaiah; Shirai, Kyoko; Kawano, Atsushi

2017-01-01

Binaural hearing helps normal-hearing listeners localize sound sources and understand speech in noise. However, it is not fully understood how far this is the case for bilateral cochlear implant (CI) users. To determine the potential benefits of bilateral over unilateral CIs, speech comprehension thresholds (SCTs) were measured in seven Japanese bilateral CI recipients using Helen test sentences (translated into Japanese) in a two-talker speech interferer presented from the front (co-located with the target speech), ipsilateral to the first-implanted ear (at +90° or −90°), and spatially symmetric at ±90°. Spatial release from masking was calculated as the difference between co-located and spatially separated SCTs. Localization was assessed in the horizontal plane by presenting either male or female speech or both simultaneously. All measurements were performed bilaterally and unilaterally (with the first implanted ear) inside a loudspeaker array. Both SCTs and spatial release from masking were improved with bilateral CIs, demonstrating mean bilateral benefits of 7.5 dB in spatially asymmetric and 3 dB in spatially symmetric speech mixture. Localization performance varied strongly between subjects but was clearly improved with bilateral over unilateral CIs with the mean localization error reduced by 27°. Surprisingly, adding a second talker had only a negligible effect on localization. PMID:28752811

Nanosecond-laser induced crosstalk of CMOS image sensor

NASA Astrophysics Data System (ADS)

Zhu, Rongzhen; Wang, Yanbin; Chen, Qianrong; Zhou, Xuanfeng; Ren, Guangsen; Cui, Longfei; Li, Hua; Hao, Daoliang

2018-02-01

The CMOS Image Sensor (CIS) is photoelectricity image device which focused the photosensitive array, amplifier, A/D transfer, storage, DSP, computer interface circuit on the same silicon substrate[1]. It has low power consumption, high integration,low cost etc. With large scale integrated circuit technology progress, the noise suppression level of CIS is enhanced unceasingly, and its image quality is getting better and better. It has been in the security monitoring, biometrice, detection and imaging and even military reconnaissance and other field is widely used. CIS is easily disturbed and damaged while it is irradiated by laser. It is of great significance to study the effect of laser irradiation on optoelectronic countermeasure and device for the laser strengthening resistance is of great significance. There are some researchers have studied the laser induced disturbed and damaged of CIS. They focused on the saturation, supersaturated effects, and they observed different effects as for unsaturation, saturation, supersaturated, allsaturated and pixel flip etc. This paper research 1064nm laser interference effect in a typical before type CMOS, and observring the saturated crosstalk and half the crosstalk line. This paper extracted from cmos devices working principle and signal detection methods such as the Angle of the formation mechanism of the crosstalk line phenomenon are analyzed.

Lexical tone recognition in noise in normal-hearing children and prelingually deafened children with cochlear implants

PubMed Central

Mao, Yitao; Xu, Li

2016-01-01

Objective The purpose of the present study was to investigate Mandarin tone recognition in background noise in children with cochlear implants (CIs), and to examine the potential factors contributing to their performance. Design Tone recognition was tested using a two-alternative forced-choice paradigm in various signal-to-noise ratio (SNR) conditions (i.e., quiet, +12, +6, 0, and −6 dB). Linear correlation analysis was performed to examine possible relationships between the tone-recognition performance of the CI children and the demographic factors. Study sample Sixty-six prelingually deafened children with CIs and 52 normal-hearing (NH) children as controls participated in the study. Results Children with CIs showed overall poorer tone-recognition performance and were more susceptible to noise than their NH peers. Tone confusions between Mandarin tone 2 and tone 3 were most prominent in both CI and NH children except for in the poorest SNR conditions. Age at implantation was significantly correlated with tone-recognition performance of the CI children in noise. Conclusions There is a marked deficit in tone recognition in prelingually deafened children with CIs, particularly in noise listening conditions. While factors that contribute to the large individual differences are still elusive, early implantation could be beneficial to tone development in pediatric CI users. PMID:27564095

Lexical tone recognition in noise in normal-hearing children and prelingually deafened children with cochlear implants.

PubMed

Mao, Yitao; Xu, Li

2017-01-01

The purpose of the present study was to investigate Mandarin tone recognition in background noise in children with cochlear implants (CIs), and to examine the potential factors contributing to their performance. Tone recognition was tested using a two-alternative forced-choice paradigm in various signal-to-noise ratio (SNR) conditions (i.e. quiet, +12, +6, 0, and -6 dB). Linear correlation analysis was performed to examine possible relationships between the tone-recognition performance of the CI children and the demographic factors. Sixty-six prelingually deafened children with CIs and 52 normal-hearing (NH) children as controls participated in the study. Children with CIs showed an overall poorer tone-recognition performance and were more susceptible to noise than their NH peers. Tone confusions between Mandarin tone 2 and tone 3 were most prominent in both CI and NH children except for in the poorest SNR conditions. Age at implantation was significantly correlated with tone-recognition performance of the CI children in noise. There is a marked deficit in tone recognition in prelingually deafened children with CIs, particularly in noise listening conditions. While factors that contribute to the large individual differences are still elusive, early implantation could be beneficial to tone development in pediatric CI users.

Strengthening the Link between Theory and Practice in Teaching Design Engineering: An Empirical Study on a New Approach

ERIC Educational Resources Information Center

Tempelman, E.; Pilot, A.

2011-01-01

In 2007, the Faculty of Industrial Design Engineering of the Delft University of Technology introduced a new bachelor program. Based on theories of learning and instruction three design principles were used to develop an approach that aims to make it easier for students to bridge the gap between theoretical design engineering courses and practical…

A Joint Venture Model for Teaching Required Courses in "Ethics and Engineering" to Engineering Students

ERIC Educational Resources Information Center

Zandvoort, H.; Van Hasselt, G. J.; Bonnet, J. A. B. A. F.

2008-01-01

We present our experience, spanning more than 10 years of teaching a course on "ethics and engineering" for a group of MSc programmes in applied sciences at Delft University of Technology. The course is taught by a team of teachers from the faculty of Applied Sciences and from the department of Philosophy of the Faculty of Technology,…

Toward Lifelong Visual Localization and Mapping

DTIC Science & Technology

2013-06-01

lab, Michael Benjamin, Rob Truax, Aisha Walcott, David Rosen, Mark VanMiddlesworth, Ross Finman, Elias Mueggler, and Dehann Fourie. They really made...S. Thrun, M. Beetz, M. Bennewitz, W. Burgard, AB Cremers , F. Dellaert, D. Fox, D. Hahnel, C. Rosenberg, N. Roy, J. Schulte, and D. Schulz. Proba

Moral and Ethical Decision Making in Canadian Forces Operations

DTIC Science & Technology

2006-01-01

Adams, and Jessica A. Sartori Humansystems® Incorporated 111 Farquhar St., 2nd floor Guelph, ON N1H 3N4 Project Manager : Dr. Barbara D. Adams...facteurs (et les nombreux autres facteurs décrits dans le présent rapport) permettra de faire avancer les connaissances concernant la prise de décision...Dans l’ensemble, cette analyse laisse à penser que la prise de décision morale et éthique ne peut pas être considérée comme un moment précis dans le

Lab-on-a-Chip Proteomic Assays for Psychiatric Disorders.

PubMed

Peter, Harald; Wienke, Julia; Guest, Paul C; Bistolas, Nikitas; Bier, Frank F

2017-01-01

Lab-on-a-chip assays allow rapid identification of multiple parameters on an automated user-friendly platform. Here we describe a fully automated multiplex immunoassay and readout in less than 15 min using the Fraunhofer in vitro diagnostics (ivD) platform to enable inexpensive point-of-care profiling of sera or a single drop of blood from patients with various diseases such as psychiatric disorders.

Using higher-level inquiry to improve spatial ability in an introductory geology course

NASA Astrophysics Data System (ADS)

Stevens, Lacey A.

Visuo-spatial skills, the ability to visually take in information and create a mental image are crucial for success in fields involving science, technology, engineering, and math (STEM) as well as fine arts. Unfortunately, due to a lack of curriculum focused on developing spatial skills, students enrolled in introductory college-level science courses tend to have difficulty with spatially-related activities. One of the best ways to engage students in science activities is through a learning and teaching strategy called inquiry. There are lower levels of inquiry wherein learning and problem-solving are guided by instructions and higher levels of inquiry wherein students have a greater degree of autonomy in learning and creating their own problem-solving strategy. A study involving 112 participants was conducted during the fall semester in 2014 at Bowling Green State University (BGSU) in an 1040 Introductory Geology Lab to determine if a new, high-level, inquiry-based lab would increase participants' spatial skills more than the traditional, low-level inquiry lab. The study also evaluated whether a higher level of inquiry differentially affected low versus high spatial ability participants. Participants were evaluated using a spatial ability assessment, and pre- and post-tests. The results of this study show that for 3-D to 2-D visualization, the higher-level inquiry lab increased participants' spatial ability more than the lower-level inquiry lab. For spatial rotational skills, all participants' spatial ability scores improved, regardless of the level of inquiry to which they were exposed. Low and high spatial ability participants were not differentially affected. This study demonstrates that a lab designed with a higher level of inquiry can increase students' spatial ability more than a lab with a low level of inquiry. A lab with a higher level of inquiry helped all participants, regardless of their initial spatial ability level. These findings show that curriculum that incorporates a high level of inquiry that integrates practice of spatial skills can increase students' spatial abilities in Geology-related coursework.

Influence of OH⋯N and NH⋯O inter- and intramolecular hydrogen bonds in the conformational equilibrium of some 1,3-disubstituted cyclohexanes through NMR spectroscopy and theoretical calculations

NASA Astrophysics Data System (ADS)

de Oliveira, Paulo R.; Viesser, Renan V.; Guerrero, Palimécio G., Jr.; Rittner, Roberto

2011-05-01

The analysis of concentration effects in the 1H NMR data of cis-3-aminocyclohexanol ( ACOL) showed that its diequatorial conformer changes from 60% at 0.01 mol L -1 to 70% at 0.40 mol L -1 in acetone-d 6. A similar increase was also observed for the diequatorial conformer of cis-3-N-methylaminocyclohexanol ( MCOL), from 32% (CDCl 3 0.01 mol L -1) to 55% (CDCl 3 0.40 mol L -1). The increase in solvent basicity leads to a large stabilization effect for the diequatorial conformer of both compounds too. For ACOL, it changes from 47% (Δ Geqeq- axax = 0.06 kcal mol -1) in CCl 4 to 93% (Δ Geqeq- axax = -1.53 kcal mol -1) in DMSO, while for MCOL it goes from 7% (Δ Geqeq- axax = 1.54 kcal mol -1) in CCl 4 to 82% (Δ Geqeq- axax = -0.88 kcal mol -1) in pyridine-d 6. These results indicate that the intr amolecular hydrogen bonds (IAHB) OH⋯N and NH⋯O stabilize the diaxial conformers of these compounds in a non-polar solvent. For cis-3-amino-1-methoxycyclohexane ( ACNE) and cis-3-N-methylamino-1-methoxy-cyclohexane ( MCNE) no changes were observed in equilibrium with the variation of solvent polarity. These results indicate for the first time that the IAHB NH⋯O is not strong enough to stabilize the diaxial conformer of these compounds and that the conformation equilibria of the cis isomers of compounds ACOL and MCOL are influenced only by the IAHB OH⋯N. Moreover, the presence of a secondary amino group (93% of diaxial conformer in CCl 4) leads to an IAHB OH⋯N stronger than in primary and tertiary amino-derivatives (53 and 54% of diaxial conformer, respectively) for 1,3-disubstituted cyclohexanes. Values obtained from the theoretical data through the B3LYP functional are in agreement with the experimental results and indicate that the IAHB strength that influences the conformational equilibrium of these compounds is the IAHB OH⋯N. Thus, the IAHB NH⋯O do not stabilize the diaxial conformer of the cis isomer of compounds ACNE and MCNE showing that the diequatorial conformer will always be more stable than the diaxial conformer, independent of concentration or solvent.

Modulating lysosomal function through lysosome membrane permeabilization or autophagy suppression restores sensitivity to cisplatin in refractory non-small-cell lung cancer cells

PubMed Central

Circu, Magdalena; Cardelli, James; Barr, Martin; O’Byrne, Kenneth; Mills, Glenn

2017-01-01

Lung cancer is the leading cause of cancer-related deaths. Most patients develop resistance to platinum within several months of treatment. We investigated whether triggering lysosomal membrane permeabilization (LMP) or suppressing autophagy can restore cisplatin susceptibility in lung cancer with acquired chemoresistance. Cisplatin IC50 in A549Pt (parental) and A549cisR (cisplatin resistant) cells was 13 μM and 47 μM, respectively. Following cisplatin exposure, A549cisR cells failed to elicit an apoptotic response. This was manifested by diminished Annexin–V staining, caspase 3 and 9, BAX and BAK activation in resistant but not in parental cells. Chloroquine preferentially promoted LMP in A549cisR cells, revealed by leakage of FITC-dextran into the cytosol as detected by immunofluorescence microscopy. This was confirmed by increased cytosolic cathepsin D signal on Immunoblot. Cell viability of cisplatin-treated A549cisR cells was decreased when co-treated with chloroquine, corresponding to a combination index below 0.8, suggesting synergism between the two drugs. Notably, chloroquine activated the mitochondrial cell death pathway as indicated by increase in caspase 9 activity. Interestingly, inhibition of lysosomal proteases using E64 conferred cytoprotection against cisplatin and chloroquine co-treatment, suggesting that chloroquine-induced cell death occurred in a cathepsin-mediated mechanism. Likewise, blockage of caspases partially rescued A549cisR cells against the cytotoxicity of cisplatin and chloroquine combination. Cisplatin promoted a dose-dependent autophagic flux induction preferentially in A549cisR cells, as evidenced by a surge in LC3-II/α-tubulin following pre-treatment with E64 and increase in p62 degradation. Compared to untreated cells, cisplatin induced an increase in cyto-ID-loaded autophagosomes in A549cisR cells that was further amplified by chloroquine, pointing toward autophagic flux activation by cisplatin. Interestingly, this effect was less pronounced in A549Pt cells. Blocking autophagy by ATG5 depletion using siRNA markedly enhances susceptibility to cisplatin in A549cisR cells. Taken together, our results underscore the utility of targeting lysosomal function in overcoming acquired cisplatin refractoriness in lung cancer. PMID:28945807

STS-98 crew takes part in Multi-Equipment Interface Test.

NASA Technical Reports Server (NTRS)

2000-01-01

While checking out equipment during a Multi-Equipment Interface Test (MEIT) in the U.S. Lab Destiny, astronaut James Voss (center) and STS-98 crew members Commander Kenneth D. Cockrell (foreground) and Pilot Mark Polansky (right) pause for the camera. They are taking part in a Multi-Equipment Interface Test (MEIT) on this significant element of the International Space Station. Also participating in the MEIT is STS-98 Mission Specialist Thomas D. Jones (Ph.D.). Voss is assigned to mission STS-102 as part of the second crew to occupy the International Space Station. During the STS-98 mission, the crew will install the Lab on the station during a series of three space walks. The mission will provide the station with science research facilities and expand its power, life support and control capabilities. The U.S. Laboratory Module continues a long tradition of microgravity materials research, first conducted by Skylab and later Shuttle and Spacelab missions. Destiny is expected to be a major feature in future research, providing facilities for biotechnology, fluid physics, combustion, and life sciences research. The Lab is planned for launch aboard Space Shuttle Atlantis on the sixth ISS flight, currently targeted no earlier than Aug. 19, 2000.

STS-98 crew takes part in Multi-Equipment Interface Test.

NASA Technical Reports Server (NTRS)

2000-01-01

Looking over equipment inside the U.S. Lab Destiny as part of a Multi-Equipment Interface Test are STS-98 Pilot Mark Polansky (left) and Commander Kenneth D. Cockrell (center). They are joined by astronaut James Voss (right), who will be among the first crew to inhabit the International Space Station on a flight in late 2000. During the STS-98 mission, the crew will install the Lab on the station during a series of three space walks. The mission will provide the station with science research facilities and expand its power, life support and control capabilities. The U.S. Laboratory Module continues a long tradition of microgravity materials research, first conducted by Skylab and later Shuttle and Spacelab missions. Destiny is expected to be a major feature in future research, providing facilities for biotechnology, fluid physics, combustion, and life sciences research. Others in the five-member crew on STS-98 are Mission Specialists Robert L. Curbeam Jr., Thomas D. Jones (Ph.D.) and Marsha S. Ivins. The Lab is planned for launch aboard Space Shuttle Atlantis on the sixth ISS flight, currently targeted no earlier than Aug. 19, 2000.

STS-98 crew takes part in Multi-Equipment Interface Test.

NASA Technical Reports Server (NTRS)

2000-01-01

In the Space Station Processing Facility, STS-98 Mission Specialist Thomas D. Jones (Ph.D.) examines a power data grapple fixture outside the U.S. Lab Destiny. Jones is taking part in a Multi-Equipment Interface Test (MEIT), along with other crew members Commander Kenneth D. Cockrell and Pilot Mark Polansky. The remaining members of the crew (not present for the MEIT) are Mission Specialists Robert L. Curbeam Jr. and Marsha S. Ivins. During the STS-98 mission, the crew will install the Lab on the International Space Station during a series of three space walks. The grapple fixture will be the base of operations for the robotic arm on later flights The mission will provide the station with science research facilities and expand its power, life support and control capabilities. The U.S. Laboratory Module continues a long tradition of microgravity materials research, first conducted by Skylab and later Shuttle and Spacelab missions. Destiny is expected to be a major feature in future research, providing facilities for biotechnology, fluid physics, combustion, and life sciences research. The Lab is planned for launch aboard Space Shuttle Atlantis on the sixth ISS flight, currently targeted no earlier than Aug. 19, 2000.

Software Comparison for Renewable Energy Deployment in a Distribution Network

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gao, David Wenzhong; Muljadi, Eduard; Tian, Tian

The main objective of this report is to evaluate different software options for performing robust distributed generation (DG) power system modeling. The features and capabilities of four simulation tools, OpenDSS, GridLAB-D, CYMDIST, and PowerWorld Simulator, are compared to analyze their effectiveness in analyzing distribution networks with DG. OpenDSS and GridLAB-D, two open source software, have the capability to simulate networks with fluctuating data values. These packages allow the running of a simulation each time instant by iterating only the main script file. CYMDIST, a commercial software, allows for time-series simulation to study variations on network controls. PowerWorld Simulator, another commercialmore » tool, has a batch mode simulation function through the 'Time Step Simulation' tool, which obtains solutions for a list of specified time points. PowerWorld Simulator is intended for analysis of transmission-level systems, while the other three are designed for distribution systems. CYMDIST and PowerWorld Simulator feature easy-to-use graphical user interfaces (GUIs). OpenDSS and GridLAB-D, on the other hand, are based on command-line programs, which increase the time necessary to become familiar with the software packages.« less

Metformin enhances cisplatin induced inhibition of cholangiocarcinoma cells via AMPK-mTOR pathway.

PubMed

Wandee, Jaroon; Prawan, Auemduan; Senggunprai, Laddawan; Kongpetch, Sarinya; Tusskorn, Ornanong; Kukongviriyapan, Veerapol

2018-05-27

AMP-activated protein kinase (AMPK) functions as a cellular energy sensor regulating various aspects of cellular metabolism. Metformin (Met), an activator of AMPK, has been reported to reduce the cancer risk and enhance antitumor effects in certain cancers. Cholangiocarcinoma (CCA) is an aggressive malignancy which rarely responds to chemotherapeutic agents. We investigated the chemosensitizing effects of Met in CCA cells. KKU-100 and KKU-452 cells were used in the study. Antiproliferation of Met and cisplatin (Cis) was analyzed by sulforhodamine B and colony forming assays. Apoptotic cell death was analyzed by acridine orange and ethidium bromide staining method. Cell cycle analysis was performed by flow cytometric method. Effects on cell migration and invasion were analyzed by wound healing assay and transwell chamber method. Expression of proteins was examined by western blot analysis. Met enhanced the antiproliferation of Cis, and conferred antimigration and anti-invasion in CCA cells, where Cis alone did not have two latter effects. This chemosensitizing effect is related to the activation of AMPK and suppression of Akt, mTOR and p70S6K. Met and Cis increased expression of p53 and p21 and suppressed expression of cyclin D1. This effect was associated with cell cycle arrest at S phase. The anti-invasion effect was casually associated with the suppression of FAK expression. The cytotoxic effect of the drug combination was mimicked by AICAR, an AMPK agonist. Met may be a novel agent to increase the efficacy of Cis to treat CCA. Copyright © 2017. Published by Elsevier Inc.

A Case for the Demedicalization of Queer Bodies

PubMed Central

Eckhert, Erik

2016-01-01

The medicalization of queer bodies in the clinic and the lab is inexorably linked to the history of LBGTQ politics. Increasingly, activists and scholars are recognizing that while the natural origins of queer sexualities carry a certain political weight, invoking the naturalness of being “born this way” fails to articulate a more substantive challenge to the effects of unexamined cis- and heteronormativity on our social institutions. With this in mind, it is crucial to understand the way these biases operate in scientific research and healthcare so their impact on what we know and how we care can be addressed. It what follows, it will be shown that the medicalization of queer bodies not only fails to diminish these deep-seated biases from sexuality research and clinical practice, but that it also impedes care providers from addressing the healthcare disparities facing queer patients today. PMID:27354849

Embracing the "D"

ERIC Educational Resources Information Center

Holley, Lisa

2010-01-01

To most people in the author's profession of Special Education, the "D" means "disabilities." At The Lab School of Washington, the "D" means "different"--learning "differently" and teaching "differently." Sally Smith, the founder of the school, had this uncanny ability to see things in her staff that they could not. The year the author graduated…

Biodistribution and Subcellular Localization of an Unnatural Boron-Containing Amino Acid (Cis-ABCPC) by Imaging Secondary Ion Mass Spectrometry for Neutron Capture Therapy of Melanomas and Gliomas

PubMed Central

Chandra, Subhash; Barth, Rolf F.; Haider, Syed A.; Yang, Weilian; Huo, Tianyao; Shaikh, Aarif L.; Kabalka, George W.

2013-01-01

The development of new boron-delivery agents is a high priority for improving the effectiveness of boron neutron capture therapy. In the present study, 1-amino-3-borono-cyclopentanecarboxylic acid (cis-ABCPC) as a mixture of its L- and D- enantiomers was evaluated in vivo using the B16 melanoma model for the human tumor and the F98 rat glioma as a model for human gliomas. A secondary ion mass spectrometry (SIMS) based imaging instrument, CAMECA IMS 3F SIMS Ion Microscope, was used for quantitative imaging of boron at 500 nm spatial resolution. Both in vivo and in vitro studies in melanoma models demonstrated that boron was localized in the cytoplasm and nuclei with some cell-to-cell variability. Uptake of cis-ABCPC in B16 cells was time dependent with a 7.5:1 partitioning ratio of boron between cell nuclei and the nutrient medium after 4 hrs. incubation. Furthermore, cis-ABCPC delivered boron to cells in all phases of the cell cycle, including S-phase. In vivo SIMS studies using the F98 rat glioma model revealed an 8:1 boron partitioning ratio between the main tumor mass and normal brain tissue with a 5:1 ratio between infiltrating tumor cells and contiguous normal brain. Since cis-ABCPC is water soluble and can cross the blood-brain-barrier via the L-type amino acid transporters (LAT), it may accumulate preferentially in infiltrating tumor cells in normal brain due to up-regulation of LAT in high grade gliomas. Once trapped inside the tumor cell, cis-ABCPC cannot be metabolized and remains either in a free pool or bound to cell matrix components. The significant improvement in boron uptake by both the main tumor mass and infiltrating tumor cells compared to those reported in animal and clinical studies of p-boronophenylalanine strongly suggest that cis-ABCPC has the potential to become a novel new boron delivery agent for neutron capture therapy of gliomas and melanomas. PMID:24058680

Atmospheric Chemistry of Hydrocarbon Fuels. Volume 2. Outdoor Chamber Data Tabulations. Part 1

DTIC Science & Technology

1981-11-01

6800 SN100015D 4600 B-NOX-1 BENDIX NOX ANALYZER MDB8101BX SN300038-2 4350 CLIMET CLIMET OPC MD4208 SN76-148 4130 EPPLEY ARB LAB; EPPLEY 11692 UV...SN300038-2 4350 CLIMET CLIMET OPC MD1208 SN76-148 4130 EPPLEY ARB LAB; EPPLEY 11692 UV RADIOMETER 4000 ECD-3 AF-LAB; 122 5% CARBOWAX-600; ECD AFF- 7...121; POROPAK N ; FID S2200 DMS-I RM-121; DIMETHYLSULFOLANE; FID 4600 B-NOX-I BENDIX NOX ANALYZER MD81O1BX SN300038-2 4350 CLIMET CLIMET OPC MD:208 SN76

SF Cleantech Pitchfest: Nano Sponges for Carbon Capture

ScienceCinema

Urban, Jeff

2018-01-16

Berkeley Lab materials scientist, Jeff Urban presents his research on using metal-organic frameworks to capture carbon at Berkeley Lab's Cleantech Pitchfest on June 1, 2016. Removing excess carbon from an overheating atmosphere is an urgent and complicated problem. The answer, according to Berkeley Lab’s Jeff Urban, could lie at the nanoscale, where specially designed cage-like structures called metal organic frameworks, or MOFs, can trap large amounts of carbon in microscopically tiny structures. A Harvard PhD with expertise in thermoelectrics, gas separation and hydrogen storage, Urban directs teams at the Molecular Foundry’s Inorganic Materials Facility.

Conjugated Fatty Acid Synthesis

PubMed Central

Rawat, Richa; Yu, Xiao-Hong; Sweet, Marie; Shanklin, John

2012-01-01

Conjugated linolenic acids (CLNs), 18:3 Δ9,11,13, lack the methylene groups found between the double bonds of linolenic acid (18:3 Δ9,12,15). CLNs are produced by conjugase enzymes that are homologs of the oleate desaturases FAD2. The goal of this study was to map the domain(s) within the Momordica charantia conjugase (FADX) responsible for CLN formation. To achieve this, a series of Momordica FADX-Arabidopsis FAD2 chimeras were expressed in the Arabidopsis fad3fae1 mutant, and the transformed seeds were analyzed for the accumulation of CLN. These experiments identified helix 2 and the first histidine box as a determinant of conjugase product partitioning into punicic acid (18:3 Δ9cis,11trans,13cis) or α-eleostearic acid (18:3 Δ9cis,11trans,13trans). This was confirmed by analysis of a FADX mutant containing six substitutions in which the sequence of helix 2 and first histidine box was converted to that of FAD2. Each of the six FAD2 substitutions was individually converted back to the FADX equivalent identifying residues 111 and 115, adjacent to the first histidine box, as key determinants of conjugase product partitioning. Additionally, expression of FADX G111V and FADX G111V/D115E resulted in an approximate doubling of eleostearic acid accumulation to 20.4% and 21.2%, respectively, compared with 9.9% upon expression of the native Momordica FADX. Like the Momordica conjugase, FADX G111V and FADX D115E produced predominantly α-eleostearic acid and little punicic acid, but the FADX G111V/D115E double mutant produced approximately equal amounts of α-eleostearic acid and its isomer, punicic acid, implicating an interactive effect of residues 111 and 115 in punicic acid formation. PMID:22451660

Potential Direct Regulators of the Drosophila yellow Gene Identified by Yeast One-Hybrid and RNAi Screens

PubMed Central

Kalay, Gizem; Lusk, Richard; Dome, Mackenzie; Hens, Korneel; Deplancke, Bart; Wittkopp, Patricia J.

2016-01-01

The regulation of gene expression controls development, and changes in this regulation often contribute to phenotypic evolution. Drosophila pigmentation is a model system for studying evolutionary changes in gene regulation, with differences in expression of pigmentation genes such as yellow that correlate with divergent pigment patterns among species shown to be caused by changes in cis- and trans-regulation. Currently, much more is known about the cis-regulatory component of divergent yellow expression than the trans-regulatory component, in part because very few trans-acting regulators of yellow expression have been identified. This study aims to improve our understanding of the trans-acting control of yellow expression by combining yeast-one-hybrid and RNAi screens for transcription factors binding to yellow cis-regulatory sequences and affecting abdominal pigmentation in adults, respectively. Of the 670 transcription factors included in the yeast-one-hybrid screen, 45 showed evidence of binding to one or more sequence fragments tested from the 5′ intergenic and intronic yellow sequences from D. melanogaster, D. pseudoobscura, and D. willistoni, suggesting that they might be direct regulators of yellow expression. Of the 670 transcription factors included in the yeast-one-hybrid screen, plus another TF previously shown to be genetically upstream of yellow, 125 were also tested using RNAi, and 32 showed altered abdominal pigmentation. Nine transcription factors were identified in both screens, including four nuclear receptors related to ecdysone signaling (Hr78, Hr38, Hr46, and Eip78C). This finding suggests that yellow expression might be directly controlled by nuclear receptors influenced by ecdysone during early pupal development when adult pigmentation is forming. PMID:27527791

A 3D Finite Element Model with Improved Spatial Resolution to Investigate the Effect of Varying Viscosity on Antarctica

NASA Astrophysics Data System (ADS)

Blank, B.; van der Wal, W.; Pappa, F.; Ebbing, J.

2017-12-01

B. Blank1, H. Hu1, W. van der Wal1, F Pappa2, J. Ebbing21Delft University of Technology 2Christian-Albrechts-University of KielSince the beginning of the 2000's time-variable gravity data from GRACE has proved to be an effective method for mapping ice mass loss in Antarctica. However, Glacial Isostatic Adjustment (GIA) models are required to correct for GIA induced mass changes. While most GIA models have adopted an Earth model that only varies radially in parameters, it has long been clear that the Earth structure also varies with longitude and latitude. For this study a new global 3D GIA model has been developed within the finite element software package ABAQUS, which can be modified to operate on a spatial resolution down to 50 km locally. The model is being benchmarked against normal model models for surface loading. It will be used to investigate the effects of a 3D varying lithosphere and upper asthenosphere in Antarctica. Viscosity which will be computed from temperature estimates with laboratory based flow laws. A new 3D temperature map of the Antarctic lithosphere has been developed within ESA's GOCE+ project based on seismic data as well as on GOCE and GRACE inferred gravity gradients. Output from the GIA model with this new temperature estimates will be compared to that of 1D viscosity profiles and other recent 3D viscosity models based on seismic data. From these side to side comparisons we want to investigate the influence of the viscosity map on uplift rates and horizontal movement. Finally the results can be compared to GPS measurement to investigate the validity of all models.

Strategic investments in non-communicable diseases (NCD) research in Africa: the GSK Africa NCD Open Lab.

PubMed

Hall, Matthew D; Dufton, Ann M; Katso, Roy M; Gatsi, Sally A; Williams, Pauline M; Strange, Michael E

2015-01-01

In March 2014, GSK announced a number of new strategic investments in Africa. One of these included investment of up to 25 million Pounds Sterling (£25 million) to create the world's first R&D Open Lab to increase understanding of non-communicable diseases (NCDs) in Africa. The vision is to create a new global R&D effort with GSK working in partnership with major funders, academic centres and governments to share expertise and resources to conduct high-quality research. The Africa NCD Open Lab will see GSK scientists collaborate with scientific research centres across Africa. An independent advisory board of leading scientists and clinicians will provide input to develop the strategy and selection of NCD research projects within a dynamic and networked open-innovation environment. It is hoped that these research projects will inform prevention and treatment strategies in the future and will enable researchers across academia and industry to discover and develop new medicines to address the specific needs of African patients.

Hadronization Studies via π 0 Electroproduction off D, C, Fe, and Pb

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mineeva, Taisiya

2013-12-01

Propagation of partons and formation of hadrons is a topic of interest to multiple communities. New data available from Drell-Yan measurements at FermiLab, heavy ion collisions in RHIC and LHC, SIDIS measurements from HERMES at DESY and Jefferson Lab, all bring different types of information on short distance processes. DIS data obtained in the well understood nuclear medium provide direct information on hadron formation, essential to lay the groundwork for testing theoretical tools. A series of semi-inclusive DIS measurements were performed on D, C, Fe, Pb nuclei. The data were collected during the EG2 run period using the CLAS at Jefferson Lab. A double-target system consisting of liquid deuterium and one of the solid targets was exposed to a 5.014 GeV electron beam. The goal of the experiment is to extract hadronic multiplicity ratios (Rmore » $$h\\atop{A}$$) off nuclei of varying size. These are believed to have sensitivity to the parton fragmentation as well as in-medium hadronization.« less

Coadministration of VDR and RXR agonists synergistically alleviates atherosclerosis through inhibition of oxidative stress: An in vivo and in vitro study.

PubMed

Lin, L M; Peng, F; Liu, Y P; Chai, D J; Ning, R B; Xu, C S; Lin, J X

2016-08-01

Diabetes contributes to atherosclerosis partially through induction of oxidative stress. Both vitamin D receptor (VDR) and retinoid X receptor (RXR) agonists exhibit anti-atherogenic effects. We explored the effects of combination treatment with VDR and RXR agonists (represented by calcitriol and bexarotene, respectively) on atherosclerosis progression and the mechanisms involved, using a diabetes model of mice. The animals were intragastrically fed calcitriol (200 ng/kg, twice-a-week), bexarotene (10 mg/kg, once-daily) either alone or in combination for 12 weeks. VDR and RXR agonists delayed atherosclerosis progression independent of serum lipid and glucose levels, and significantly reduced the protein expression of nicotinamide adenine dinucleotide phosphate (NADPH) oxidase subunit gp91phox and nuclear factor-kappa B (NF-κB) subunit p65, as well as plasma biomarkers of oxidative stress and inflammation. Combination therapy alleviated atherosclerosis and inhibited indexes of oxidative stress and inflammation to a greater extent than either monotherapy. In the in vitro study, naturally occurring VDR ligand 1α,25-dihydroxyvitamin D3 (1,25[OH]2D3) and RXR ligand 9-cis retinoic acid (9-cis-RA), both significantly inhibited high-glucose-induced endothelial cell apoptosis. Co-administration of VDR and RXR ligands produced synergistic protection against endothelial apoptosis by antagonizing the protein kinase C /NADPH oxidase/reactive oxygen species pathway. The inhibitory effects of 9-cis-RA on oxidative stress was attenuated when VDR was downregulated by VDR siRNA; however, downregulation of RXR by RXR siRNA imposed no influence on the effects of 1,25(OH)2D3. Combination treatment with VDR and RXR agonists synergistically alleviated diabetic atherosclerosis through inhibition of oxidative stress, and the preventive effects of RXR agonist may partially depend on VDR activation. Copyright © 2016. Published by Elsevier Ireland Ltd.

Fast Synchronization of Ultradian Oscillators Controlled by Delta-Notch Signaling with Cis-Inhibition

PubMed Central

Tiedemann, Hendrik B.; Schneltzer, Elida; Zeiser, Stefan; Wurst, Wolfgang; Beckers, Johannes; Przemeck, Gerhard K. H.; Hrabě de Angelis, Martin

2014-01-01

While it is known that a large fraction of vertebrate genes are under the control of a gene regulatory network (GRN) forming a clock with circadian periodicity, shorter period oscillatory genes like the Hairy-enhancer-of split (Hes) genes are discussed mostly in connection with the embryonic process of somitogenesis. They form the core of the somitogenesis-clock, which orchestrates the periodic separation of somites from the presomitic mesoderm (PSM). The formation of sharp boundaries between the blocks of many cells works only when the oscillators in the cells forming the boundary are synchronized. It has been shown experimentally that Delta-Notch (D/N) signaling is responsible for this synchronization. This process has to happen rather fast as a cell experiences at most five oscillations from its ‘birth’ to its incorporation into a somite. Computer simulations describing synchronized oscillators with classical modes of D/N-interaction have difficulties to achieve synchronization in an appropriate time. One approach to solving this problem of modeling fast synchronization in the PSM was the consideration of cell movements. Here we show that fast synchronization of Hes-type oscillators can be achieved without cell movements by including D/N cis-inhibition, wherein the mutual interaction of DELTA and NOTCH in the same cell leads to a titration of ligand against receptor so that only one sort of molecule prevails. Consequently, the symmetry between sender and receiver is partially broken and one cell becomes preferentially sender or receiver at a given moment, which leads to faster entrainment of oscillators. Although not yet confirmed by experiment, the proposed mechanism of enhanced synchronization of mesenchymal cells in the PSM would be a new distinct developmental mechanism employing D/N cis-inhibition. Consequently, the way in which Delta-Notch signaling was modeled so far should be carefully reconsidered. PMID:25275459

Intramolecular dehydration of biomass-derived sugar alcohols in high-temperature water.

PubMed

Yamaguchi, Aritomo; Muramatsu, Natsumi; Mimura, Naoki; Shirai, Masayuki; Sato, Osamu

2017-01-25

The intramolecular dehydration of biomass-derived sugar alcohols d-sorbitol, d-mannitol, galactitol, xylitol, ribitol, l-arabitol, erythritol, l-threitol, and dl-threitol was investigated in high-temperature water at 523-573 K without the addition of any acid catalysts. d-Sorbitol and d-mannitol were dehydrated into isosorbide and isomannide, respectively, as dianhydrohexitol products. Galactitol was dehydrated into anhydrogalactitols; however, the anhydrogalactitols could not be dehydrated into dianhydrogalactitol products because of the orientation of the hydroxyl groups at the C-3 and C-6 positions. Pentitols such as xylitol, ribitol, and l-arabitol were dehydrated into anhydropentitols. The dehydration rates of the pentitols containing hydroxyl groups in the trans form, which remained as hydroxyl groups in the product tetrahydrofuran, were larger than those containing hydroxyl groups in the cis form because of the structural hindrance caused by the hydroxyl groups in the cis form during the dehydration process. In the case of the tetritols, the dehydration of erythritol was slower than that of threitol, which could also be explained by the structural hindrance of the hydroxyl groups. The dehydration of l-threitol was faster than that of dl-threitol, which implies that molecular clusters were formed by hydrogen bonding between the sugar alcohols in water, which could be an important factor that affects the dehydration process.

Heavy Metal Blood Test: MedlinePlus Lab Test Information

MedlinePlus

... Internet]. Washington D.C.: American Association for Clinical Chemistry; c2001–2017. Heavy Metals: Common Questions [updated 2016 ... Internet]. Washington D.C.: American Association for Clinical Chemistry; c2001–2017. Heavy Metals: The Test [updated 2016 ...

Photophysics of 4-dimethylamino-4'-cyanostilbene and 4-azetidinyl-4'-cyanostilbene. Time-resolved fluorescence and trans-cis photoisomerisation

NASA Astrophysics Data System (ADS)

Il'ichev, Yurii V.; Kühnle, Wolfgang; Zachariasse, Klaas A.

1996-11-01

The fluorescence decays of trans-4-dimethylamino-4'-cyanostilbene (DCS) and trans-4-azetidinyl-4'-cyanostilbene (ACS) in an unpolar (n-heptane) and a polar (acetonitrile) solvent are single exponential down to a time resolution of around 5 ps and dual fluorescence is not observed. The dipole moment increases in two steps: from 7 D in the ground state via 13 D (DCS) or 10 D (ACS) for the Franck-Condon excited state to 21 D (DCS) or 22 D (ACS) for the relaxed fluorescing CT state. This means that the intramolecular charge transfer (ICT) in the excited state at most involves an intermediate with a subpicosecond lifetime. The presence of the azetidinyl group in ACS does not slow down the ICT reaction, contrary to what has been found for the 4-aminobenzonitriles, showing that inversion of the amino group is not an important reaction coordinate here. The activation energy Etc for trans-cis photoisomerisation is determined from the fluorescence decays in n-heptane (14.0 kJ/mol, DCS) and in acetonitrile (22.7 kJ/mol, DCS and 22.5 kJ/mol, ACS). This increase of Etc with solvent polarity, opposite to what has been found for trans-stilbene, shows that the photoisomerisation transition state is less polar than the CT state.

Integrated multidimensional and comprehensive 2D GC analysis of fatty acid methyl esters.

PubMed

Zeng, Annie Xu; Chin, Sung-Tong; Marriott, Philip J

2013-03-01

Fatty acid methyl ester (FAME) profiling in complex fish oil and milk fat samples was studied using integrated comprehensive 2D GC (GC × GC) and multidimensional GC (MDGC). Using GC × GC, FAME compounds--cis- and trans-isomers, and essential fatty acid isomers--ranging from C18 to C22 in fish oil and C18 in milk fat were clearly displayed in contour plot format according to structural properties and patterns, further identified based on authentic standards. Incompletely resolved regions were subjected to MDGC, with Cn (n = 18, 20) zones transferred to a (2)D column. Elution behavior of C18 FAME on various (2)D column phases (ionic liquids IL111, IL100, IL76, and modified PEG) was evaluated. Individual isolated Cn zones demonstrated about four-fold increased peak capacities. The IL100 provided superior separation, good peak shape, and utilization of elution space. For milk fat-derived FAME, the (2)D chromatogram revealed at least three peaks corresponding to C18:1, more than six peaks for cis/trans-C18:2 isomers, and two peaks for C18:3. More than 17 peaks were obtained for the C20 region of fish oil-derived FAMEs using MDGC, compared with ten peaks using GC × GC. The MDGC strategy is useful for improved FAME isomer separation and confirmation. © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Biofuels Science and Facilities (Carbon Cycle 2.0)

ScienceCinema

Keasling, Jay D.

2018-04-27

Jay D. Keasling speaks at the Carbon Cycle 2.0 kick-off symposium Feb. 2, 2010. We emit more carbon into the atmosphere than natural processes are able to remove - an imbalance with negative consequences. Carbon Cycle 2.0 is a Berkeley Lab initiative to provide the science needed to restore this balance by integrating the Labs diverse research activities and delivering creative solutions toward a carbon-neutral energy future.

Nanoscale Optical Imaging and Spectroscopy from Visible to Mid-Infrared

DTIC Science & Technology

2015-11-13

field characterization of nanoscale materials, it also complements the near- field scanning optical microscope currently available in the PI’s lab...field scanning optical microscope currently available in the PI’s lab. This equipment will begin making major impacts on at least three current DoD...SECURITY CLASSIFICATION OF: 1. REPORT DATE (DD-MM-YYYY) 4. TITLE AND SUBTITLE 13. SUPPLEMENTARY NOTES 12. DISTRIBUTION AVAILIBILITY STATEMENT 6

Energy Innovations: Science & Technology at NREL, Winter 2010 (Brochure)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

2010-02-01

The Energy Innovations newsletter serves as a key outreach tool for NREL to tout the lab's accomplishments, progress, and activities to key stakeholders who can impact the lab's level of funding and potential resources. Audiences include VIP visitors to NREL, current and potential partners in our work, and key decision makers who want to know about NREL's R&D directions and the quality and significance of our results.

Energy Innovations: Science & Technology at NREL, Fall 2009

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

2009-09-01

The Energy Innovations newsletter serves as a key outreach tool for NREL to tout the lab's accomplishments, progress, and activities to key stakeholders who can impact the lab's level of funding and potential resources. Audiences include VIP visitors to NREL, current and potential partners in our work, and key decision makers who want to know about NREL's R&D directions and the quality and significance of our results.

Recent developments from the OPEnS Lab

NASA Astrophysics Data System (ADS)

Selker, J. S.; Good, S. P.; Higgins, C. W.; Sayde, C.; Buskirk, B.; Lopez, M.; Nelke, M.; Udell, C.

2016-12-01

The Openly Published Environmental Sensing (OPEnS) lab is a facility that is open to all from around the world to use (http://agsci.oregonstate.edu/open-sensing). With 3-D CAD, electronics benches, 3-D printers and laser cutters, and a complete precision metal shop, the lab can build just about anything. Electronic platforms such as the Arduino are combined with cutting edge sensors, and packaged in rugged housing to address critical environmental sensing needs. The results are published in GITHub and in the AGU journal Earth and Space Sciences under the special theme of "Environmental Sensing." In this poster we present advancements including: A ultra-precise isotopic sampler for rainfall; an isotopic sampler for soil gas; a data-logging wind vane that can be mounted on the tether of a balloon; a rain-gage calibrator with three rates of constant application; a <$20 dissolved O2 probe for water; a stream-bed permeameter that gives rapid quantification of permeability. You can use the OPEnS lab! Just sketch your idea on a white board and send it in. The conversation is started, and your prototype can be ready in a few weeks. We have a staff of three engineers ready to help, where you are working remotely, or decide to spend some time with the team in Corvallis.

Lactic acid bacteria and yeasts associated with gowé production from sorghum in Bénin.

PubMed

Vieira-Dalodé, G; Jespersen, L; Hounhouigan, J; Moller, P L; Nago, C M; Jakobsen, M

2007-08-01

To identify the dominant micro-organisms involved in the production of gowé, a fermented beverage, and to select the most appropriate species for starter culture development. Samples of sorghum gowé produced twice at three different production sites were taken at different fermentation times. DNA amplification by internal transcribed spacer-polymerase chain reaction of 288 lactic acid bacteria (LAB) isolates and 16S rRNA gene sequencing of selected strains revealed that the dominant LAB responsible for gowé fermentation were Lactobacillus fermentum, Weissella confusa, Lactobacillus mucosae, Pediococcus acidilactici, Pediococcus pentosaceus and Weissella kimchii. DNA from 200 strains of yeasts was amplified and the D1/D2 domain of the 26S rRNA gene was sequenced for selected isolates, revealing that the yeasts species were Kluyveromyces marxianus, Pichia anomala, Candida krusei and Candida tropicalis. Gowé processing is characterized by a mixed fermentation dominated by Lact. fermentum, W. confusa and Ped. acidilactici for the LAB and by K. marxianus, P. anomala and C. krusei for the yeasts. The diversity of the LAB and yeasts identified offers new opportunities for technology upgrading and products development in gowé production. The identified species can be used as possible starter for a controlled fermentation of gowé.

42 CFR 493.1274 - Standard: Cytology.

Code of Federal Regulations, 2014 CFR

2014-10-01

...-moderate and severe dysplasia, carcinoma in situ (CIS)/CIN 2 and CIN 3 or with features suspicious for... neoplastic (endocervical or glandular). (C) Endocervical adenocarcinoma in situ. (D) Adenocarcinoma... preparations must be evaluated on the premises of a laboratory certified to conduct testing in the subspecialty...

42 CFR 493.1274 - Standard: Cytology.

Code of Federal Regulations, 2013 CFR

2013-10-01

...-moderate and severe dysplasia, carcinoma in situ (CIS)/CIN 2 and CIN 3 or with features suspicious for... neoplastic (endocervical or glandular). (C) Endocervical adenocarcinoma in situ. (D) Adenocarcinoma... preparations must be evaluated on the premises of a laboratory certified to conduct testing in the subspecialty...

42 CFR 493.1274 - Standard: Cytology.

Code of Federal Regulations, 2010 CFR

2010-10-01

...-moderate and severe dysplasia, carcinoma in situ (CIS)/CIN 2 and CIN 3 or with features suspicious for... neoplastic (endocervical or glandular). (C) Endocervical adenocarcinoma in situ. (D) Adenocarcinoma... preparations must be evaluated on the premises of a laboratory certified to conduct testing in the subspecialty...

42 CFR 493.1274 - Standard: Cytology.

Code of Federal Regulations, 2011 CFR

2011-10-01

...-moderate and severe dysplasia, carcinoma in situ (CIS)/CIN 2 and CIN 3 or with features suspicious for... neoplastic (endocervical or glandular). (C) Endocervical adenocarcinoma in situ. (D) Adenocarcinoma... preparations must be evaluated on the premises of a laboratory certified to conduct testing in the subspecialty...

42 CFR 493.1274 - Standard: Cytology.

Code of Federal Regulations, 2012 CFR

2012-10-01

...-moderate and severe dysplasia, carcinoma in situ (CIS)/CIN 2 and CIN 3 or with features suspicious for... neoplastic (endocervical or glandular). (C) Endocervical adenocarcinoma in situ. (D) Adenocarcinoma... preparations must be evaluated on the premises of a laboratory certified to conduct testing in the subspecialty...

A Sleeping Beauty forward genetic screen identifies new genes and pathways driving osteosarcoma development and metastasis

PubMed Central

Moriarity, Branden S; Otto, George M; Rahrmann, Eric P; Rathe, Susan K; Wolf, Natalie K; Weg, Madison T; Manlove, Luke A; LaRue, Rebecca S; Temiz, Nuri A; Molyneux, Sam D; Choi, Kwangmin; Holly, Kevin J; Sarver, Aaron L; Scott, Milcah C; Forster, Colleen L; Modiano, Jaime F; Khanna, Chand; Hewitt, Stephen M; Khokha, Rama; Yang, Yi; Gorlick, Richard; Dyer, Michael A; Largaespada, David A

2016-01-01

Osteosarcomas are sarcomas of the bone, derived from osteoblasts or their precursors, with a high propensity to metastasize. Osteosarcoma is associated with massive genomic instability, making it problematic to identify driver genes using human tumors or prototypical mouse models, many of which involve loss of Trp53 function. To identify the genes driving osteosarcoma development and metastasis, we performed a Sleeping Beauty (SB) transposon-based forward genetic screen in mice with and without somatic loss of Trp53. Common insertion site (CIS) analysis of 119 primary tumors and 134 metastatic nodules identified 232 sites associated with osteosarcoma development and 43 sites associated with metastasis, respectively. Analysis of CIS-associated genes identified numerous known and new osteosarcoma-associated genes enriched in the ErbB, PI3K-AKT-mTOR and MAPK signaling pathways. Lastly, we identified several oncogenes involved in axon guidance, including Sema4d and Sema6d, which we functionally validated as oncogenes in human osteosarcoma. PMID:25961939

[Comparison of planning quality and delivery efficiency between volumetric modulated arc therapy and dynamic intensity modulated radiation therapy for nasopharyngeal carcinoma with more than 4 prescribed dose levels].

PubMed

Jia, Pengfei; Xu, Jun; Zhou, Xiaoxi; Chen, Jian; Tang, Lemin

2017-12-01

The aim of this study is to compare the planning quality and delivery efficiency between dynamic intensity modulated radiation therapy (d-IMRT) and dual arc volumetric modulated arc therapy (VMAT) systematically for nasopharyngeal carcinoma (NPC) patients with multi-prescribed dose levels, and to analyze the correlations between target volumes and plan qualities. A total of 20 patients of NPC with 4-5 prescribed dose levels to achieve simultaneous integrated boost (SIB) treated by sliding window d-IMRT in our department from 2014 to 2015 were re-planned with dual arc VMAT. All optimization objectives for each VMAT plan were as the same as the corresponding d-IMRT plan. The dose parameters for targets and organ at risk (OAR), the delivery time and monitor units (MU) in two sets of plans were compared respectively. The treatment accuracy was tested by three dimensional dose validation system. Finally, the correlations between the difference of planning quality and the volume of targets were discussed. The conform indexes (CIs) of planning target volumes (PTVs) in VMAT plans were obviously high than those in d-IMRT plans ( P < 0.05), but no significant correlations between the difference of CIs and the volume of targets were discovered ( P > 0.05). The target coverage and heterogeneity indexes (HIs) of PTV 1 and PGTV nd and PTV 3 in two sets of plans were consistent. The doses of PTV 2 decreased and HIs were worse in VMAT plans. VMAT could provide better spinal cord and brainstem sparing, but increase mean dose of parotids. The average number of MUs and delivery time for d-IMRT were 3.32 and 2.19 times of that for VMAT. The γ-index (3 mm, 3%) analysis for each plans was more than 97% in COMPASS ® measurement for quality assurance (QA). The results show that target dose coverages in d-IMRT and VMAT plans are similar for NPC with multi-prescribed dose levels. VMAT could improve the the CIs of targets, but reduce the dose to the target volume in neck except for PGTV nd . The biggest advantages of VMAT over d-IMRT are delivery efficiency and QA.

Dietary vitamin D intake and risk of type 2 diabetes in the European Prospective Investigation into Cancer and Nutrition: the EPIC-InterAct study.

PubMed

Abbas, S; Linseisen, J; Rohrmann, S; Beulens, J W J; Buijsse, B; Amiano, P; Ardanaz, E; Balkau, B; Boeing, H; Clavel-Chapelon, F; Fagherazzi, G; Franks, P W; Gavrila, D; Grioni, S; Kaaks, R; Key, T J; Khaw, K T; Kühn, T; Mattiello, A; Molina-Montes, E; Nilsson, P M; Overvad, K; Quirós, J R; Rolandsson, O; Sacerdote, C; Saieva, C; Slimani, N; Sluijs, I; Spijkerman, A M W; Tjonneland, A; Tumino, R; van der A, D L; Zamora-Ros, R; Sharp, S J; Langenberg, C; Forouhi, N G; Riboli, E; Wareham, N J

2014-02-01

Prospective cohort studies have indicated that serum vitamin D levels are inversely related to risk of type 2 diabetes. However, such studies cannot determine the source of vitamin D. Therefore, we examined the association of dietary vitamin D intake with incident type 2 diabetes within the European Prospective Investigation into Cancer and Nutrition (EPIC)-InterAct study in a heterogeneous European population including eight countries with large geographical variation. Using a case-cohort design, 11,245 incident cases of type 2 diabetes and a representative subcohort (N=15,798) were included in the analyses. Hazard ratios (HR) and 95% confidence intervals (CIs) for type 2 diabetes were calculated using a Prentice-weighted Cox regression adjusted for potential confounders. Twenty-four-hour diet-recall data from a subsample (N=2347) were used to calibrate habitual intake data derived from dietary questionnaires. Median follow-up time was 10.8 years. Dietary vitamin D intake was not significantly associated with the risk of type 2 diabetes. HR and 95% CIs for the highest compared to the lowest quintile of uncalibrated vitamin D intake was 1.09 (0.97-1.22) (Ptrend=0.17). No associations were observed in a sex-specific analysis. The overall pooled effect (HR (95% CI)) using the continuous calibrated variable was 1.00 (0.97-1.03) per increase of 1 μg/day dietary vitamin D. This observational study does not support an association between higher dietary vitamin D intake and type 2 diabetes incidence. This result has to be interpreted in light of the limited contribution of dietary vitamin D on the overall vitamin D status of a person.

High-Performance Integrated Control of water quality and quantity in urban water reservoirs

NASA Astrophysics Data System (ADS)

Galelli, S.; Castelletti, A.; Goedbloed, A.

2015-11-01

This paper contributes a novel High-Performance Integrated Control framework to support the real-time operation of urban water supply storages affected by water quality problems. We use a 3-D, high-fidelity simulation model to predict the main water quality dynamics and inform a real-time controller based on Model Predictive Control. The integration of the simulation model into the control scheme is performed by a model reduction process that identifies a low-order, dynamic emulator running 4 orders of magnitude faster. The model reduction, which relies on a semiautomatic procedural approach integrating time series clustering and variable selection algorithms, generates a compact and physically meaningful emulator that can be coupled with the controller. The framework is used to design the hourly operation of Marina Reservoir, a 3.2 Mm3 storm-water-fed reservoir located in the center of Singapore, operated for drinking water supply and flood control. Because of its recent formation from a former estuary, the reservoir suffers from high salinity levels, whose behavior is modeled with Delft3D-FLOW. Results show that our control framework reduces the minimum salinity levels by nearly 40% and cuts the average annual deficit of drinking water supply by about 2 times the active storage of the reservoir (about 4% of the total annual demand).

Prediction of percutaneous absorption in human using three-dimensional human cultured epidermis LabCyte EPI-MODEL.

PubMed

Hikima, Tomohiro; Kaneda, Noriaki; Matsuo, Kyouhei; Tojo, Kakuji

2012-01-01

The objective of this study is to establish a relationship of the skin penetration parameters between the three-dimensional cultured human epidermis LabCyte EPI-MODEL (LabCyte) and hairless mouse (HLM) skin penetration in vitro and to predict the skin penetration and plasma concentration profile in human. The skin penetration experiments through LabCyte and HLM skin were investigated using 19 drugs that have a different molecular weight and lipophilicity. The penetration flux for LabCyte reached 30 times larger at maximum than that for HLM skin. The human data can be estimated from the in silico approach with the diffusion coefficient (D), the partition coefficient (K) and the skin surface concentration (C) of drugs by assuming the bi-layer skin model for both LabCyte and HLM skin. The human skin penetration of β-estradiol, prednisolone, testosterone and ethynylestradiol was well agreed between the simulated profiles and in vitro experimental data. Plasma concentration profiles of β-estradiol in human were also simulated and well agreed with the clinical data. The present alternative method may decrease human or animal skin experiment for in vitro skin penetration.

Proceedings of the Workshop on Measurement and Analysis of Structural Response in Concrete Armor Units Held in Vicksburg, Mississippi on 23-24 January 1985

DTIC Science & Technology

1988-02-01

57 Summary--"Comments from Dr. Hans Burcharth" ............81 "Strength of Armour Blocks...335 APPENDICES........................................................ 387 A--"Strength of Concrete Armour Units for Breakwaters"’ --Delft...STAT!STICS DESIGN WAVE CLIMATE PRELIMINARY DESIGN CALCULATION OF ARMOUR STABILIY ETC MODEL TESTS OF PRELIMINARY DESIGN FINAL DESIGN Figure 1. Ideal

IFLA General Conference, 1985. Collection and Services Division. Section: Interlending and Document Delivery. The Online System of Union Catalogues and Interlibrary Loan ('NCC/IBL') in the Netherlands.

ERIC Educational Resources Information Center

Willemsen, Arie W.

This paper describes the interlending system in the Netherlands and examines the country's union catalogs, the main instrument in the interlending procedure. An overview of the integrated interlending system is provided; the union catalogs of the Royal Library in The Hague, the Technical University Library at Delft, and the library of the…

West Europe Report, Science and Technology, No. 163

DTIC Science & Technology

1983-11-10

recommenda- tion. A representative of the unions thinks that the risk analysis of the com- mission was too limited and the spokesman of the...Gist-Brocades in Delft, Unilever in Vlaardingen and Organon (Akzo Pharma) in Oss. A few other firms are considering to start with this technique...large multinationals which already were engaged in the application of bio- technology. Ir R. Keuning, member of the board of Unilever Research Labor

Supporting Crop Loss Insurance Policy of Indonesia through Rice Yield Modelling and Forecasting

NASA Astrophysics Data System (ADS)

van Verseveld, Willem; Weerts, Albrecht; Trambauer, Patricia; de Vries, Sander; Conijn, Sjaak; van Valkengoed, Eric; Hoekman, Dirk; Grondard, Nicolas; Hengsdijk, Huib; Schrevel, Aart; Vlasbloem, Pieter; Klauser, Dominik

2017-04-01

The Government of Indonesia has decided on a crop insurance policy to assist Indonesia's farmers and to boost food security. To support the Indonesian government, the G4INDO project (www.g4indo.org) is developing/constructing an integrated platform implemented in the Delft-FEWS forecasting system (Werner et al., 2013). The integrated platform brings together remote sensed data (both visible and radar) and hydrologic, crop and reservoir modelling and forecasting to improve the modelling and forecasting of rice yield. The hydrological model (wflow_sbm), crop model (wflow_lintul) and reservoir models (RTC-Tools) are coupled on time stepping basis in the OpenStreams framework (see https://github.com/openstreams/wflow) and deployed in the integrated platform to support seasonal forecasting of water availability and crop yield. First we will show the general idea about the G4INDO project, the integrated platform (including Sentinel 1 & 2 data) followed by first (reforecast) results of the coupled models for predicting water availability and crop yield in the Brantas catchment in Java, Indonesia. Werner, M., Schellekens, J., Gijsbers, P., Van Dijk, M., Van den Akker, O. and Heynert K, 2013. The Delft-FEWS flow forecasting system, Environmental Modelling & Software; 40:65-77. DOI: 10.1016/j.envsoft.2012.07.010.

Filtration Characterization Method as Tool to Assess Membrane Bioreactor Sludge Filterability—The Delft Experience

PubMed Central

Lousada-Ferreira, Maria; Krzeminski, Pawel; Geilvoet, Stefan; Moreau, Adrien; Gil, Jose A.; Evenblij, Herman; van Lier, Jules B.; van der Graaf, Jaap H. J. M.

2014-01-01

Prevention and removal of fouling is often the most energy intensive process in Membrane Bioreactors (MBRs), responsible for 40% to 50% of the total specific energy consumed in submerged MBRs. In the past decade, methods were developed to quantify and qualify fouling, aiming to support optimization in MBR operation. Therefore, there is a need for an evaluation of the lessons learned and how to proceed. In this article, five different methods for measuring MBR activated sludge filterability and critical flux are described, commented and evaluated. Both parameters characterize the fouling potential in full-scale MBRs. The article focuses on the Delft Filtration Characterization method (DFCm) as a convenient tool to characterize sludge properties, namely on data processing, accuracy, reproducibility, reliability, and applicability, defining the boundaries of the DFCm. Significant progress was made concerning fouling measurements in particular by using straight forward approaches focusing on the applicability of the obtained results. Nevertheless, a fouling measurement method is still to be defined which is capable of being unequivocal, concerning the fouling parameters definitions; practical and simple, in terms of set-up and operation; broad and useful, in terms of obtained results. A step forward would be the standardization of the aforementioned method to assess the sludge filtration quality. PMID:24957174

The reduction of CrVI to CrIII by the alpha and beta anomers of D-glucose in dimethyl sulfoxide. A comparative kinetic and mechanistic study.

PubMed

Signorella, S; Lafarga, R; Daier, V; Sala, L F

2000-02-11

The reduction of CrVI by alpha-D-glucose and beta-D-glucose was studied in dimethyl sulfoxide in the presence of pyridinium p-toluensulfonate, a medium where mutarotation is slower than the redox reaction. The two anomers reduce CrVI by formation of an intermediate CrVI ester precursor of the slow redox step. The equilibrium constant for the formation of the intermediate chromic ester and the rate of the redox steps are different for each anomer. alpha-D-Glucose forms the CrVI-Glc ester with a higher equilibrium constant than beta-D-glucose, but the electron transfer within this complex is slower than for the beta anomer. The difference is attributed to the better chelating ability of the 1,2-cis-diolate moiety of the alpha anomer. The CrV species, generated in the reaction mixture, reacts with the two anomers at a rate comparable with that of CrVI. The EPR spectra show that the alpha anomer forms several linkage isomers of the five-coordinate CrV bis-chelate, while beta-D-glucose affords a mixture of six-coordinate CrV monochelate and five-coordinate CrV bis-chelate. The conversion of the CrV mono- to bis-chelate is discussed in terms of the ability of the 1,2-cis- versus 1,2-trans-diolate moieties of the glucose anomers to bind CrV.

Energy Systems Integration News | Energy Systems Integration Facility |

Science.gov Websites

NREL group of children in front of a 3D visualization screen. Students from the OpenWorld Learning group interact with a wind turbine wind velocity simulation at the 3D visualization lab at the

3D Printing of Molecular Potential Energy Surface Models

ERIC Educational Resources Information Center

Lolur, Phalgun; Dawes, Richard

2014-01-01

Additive manufacturing, commonly known as 3D printing, is gaining popularity in a variety of applications and has recently become routinely available. Today, 3D printing services are not only found in engineering design labs and through online companies, but also in university libraries offering student access. In addition, affordable options for…

Nucleotide Excision Repair Lesion-Recognition Protein Rad4 Captures a Pre-Flipped Partner Base in a Benzo[a]pyrene-Derived DNA Lesion: How Structure Impacts the Binding Pathway.

PubMed

Mu, Hong; Geacintov, Nicholas E; Min, Jung-Hyun; Zhang, Yingkai; Broyde, Suse

2017-06-19

The xeroderma pigmentosum C protein complex (XPC) recognizes a variety of environmentally induced DNA lesions and is the key in initiating their repair by the nucleotide excision repair (NER) pathway. When bound to a lesion, XPC flips two nucleotide pairs that include the lesion out of the DNA duplex, yielding a productively bound complex that can lead to successful lesion excision. Interestingly, the efficiencies of NER vary greatly among different lesions, influencing their toxicity and mutagenicity in cells. Though differences in XPC binding may influence NER efficiency, it is not understood whether XPC utilizes different mechanisms to achieve productive binding with different lesions. Here, we investigated the well-repaired 10R-(+)-cis-anti-benzo[a]pyrene-N 2 -dG (cis-B[a]P-dG) DNA adduct in a duplex containing normal partner C opposite the lesion. This adduct is derived from the environmental pro-carcinogen benzo[a]pyrene and is likely to be encountered by NER in the cell. We have extensively investigated its binding to the yeast XPC orthologue, Rad4, using umbrella sampling with restrained molecular dynamics simulations and free energy calculations. The NMR solution structure of this lesion in duplex DNA has shown that the dC complementary to the adducted dG is flipped out of the DNA duplex in the absence of XPC. However, it is not known whether the "pre-flipped" base would play a role in its recognition by XPC. Our results show that Rad4 first captures the displaced dC, which is followed by a tightly coupled lesion-extruding pathway for productive binding. This binding path differs significantly from the one deduced for the small cis-syn cyclobutane pyrimidine dimer lesion opposite mismatched thymines [ Mu , H. , ( 2015 ) Biochemistry , 54 ( 34 ), 5263 - 7 ]. The possibility of multiple paths that lead to productive binding to XPC is consistent with the versatile lesion recognition by XPC that is required for successful NER.

Nucleotide Excision Repair Lesion-Recognition Protein Rad4 Captures a Pre-Flipped Partner Base in a Benzo[a]pyrene-Derived DNA Lesion: How Structure Impacts the Binding Pathway

PubMed Central

2017-01-01

The xeroderma pigmentosum C protein complex (XPC) recognizes a variety of environmentally induced DNA lesions and is the key in initiating their repair by the nucleotide excision repair (NER) pathway. When bound to a lesion, XPC flips two nucleotide pairs that include the lesion out of the DNA duplex, yielding a productively bound complex that can lead to successful lesion excision. Interestingly, the efficiencies of NER vary greatly among different lesions, influencing their toxicity and mutagenicity in cells. Though differences in XPC binding may influence NER efficiency, it is not understood whether XPC utilizes different mechanisms to achieve productive binding with different lesions. Here, we investigated the well-repaired 10R-(+)-cis-anti-benzo[a]pyrene-N2-dG (cis-B[a]P-dG) DNA adduct in a duplex containing normal partner C opposite the lesion. This adduct is derived from the environmental pro-carcinogen benzo[a]pyrene and is likely to be encountered by NER in the cell. We have extensively investigated its binding to the yeast XPC orthologue, Rad4, using umbrella sampling with restrained molecular dynamics simulations and free energy calculations. The NMR solution structure of this lesion in duplex DNA has shown that the dC complementary to the adducted dG is flipped out of the DNA duplex in the absence of XPC. However, it is not known whether the “pre-flipped” base would play a role in its recognition by XPC. Our results show that Rad4 first captures the displaced dC, which is followed by a tightly coupled lesion-extruding pathway for productive binding. This binding path differs significantly from the one deduced for the small cis-syn cyclobutane pyrimidine dimer lesion opposite mismatched thymines [MuH., (2015) Biochemistry, 54(34), 5263−726270861]. The possibility of multiple paths that lead to productive binding to XPC is consistent with the versatile lesion recognition by XPC that is required for successful NER. PMID:28460163

Conference James F.Buckli

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2008-02-07

L'association du personnel a le plaisir d'accueillir Mons. James F.Buckli, astronaute, né en 1947. Il a participé à la mission Space Lab D1 qui pour la première fois mettait 8 personnes sur orbite.L'ass.du pers. remercie aussi Gordon White(s) de la mission américaine d'avoir permis d'organiser cette conférence

Redox Regulation of Cell Contacts by Tricellulin and Occludin: Redox-Sensitive Cysteine Sites in Tricellulin Regulate Both Tri- and Bicellular Junctions in Tissue Barriers as Shown in Hypoxia and Ischemia.

PubMed

Cording, Jimmi; Günther, Ramona; Vigolo, Emilia; Tscheik, Christian; Winkler, Lars; Schlattner, Isabella; Lorenz, Dorothea; Haseloff, Reiner F; Schmidt-Ott, Kai M; Wolburg, Hartwig; Blasig, Ingolf E

2015-11-01

Tight junctions (TJs) seal paracellular clefts in epithelia/endothelia and form tissue barriers for proper organ function. TJ-associated marvel proteins (TAMPs; tricellulin, occludin, marvelD3) are thought to be relevant to regulation. Under normal conditions, tricellulin tightens tricellular junctions against macromolecules. Traces of tricellulin occur in bicellular junctions. As pathological disturbances have not been analyzed, the structure and function of human tricellulin, including potentially redox-sensitive Cys sites, were investigated under reducing/oxidizing conditions at 3- and 2-cell contacts. Ischemia, hypoxia, and reductants redistributed tricellulin from 3- to 2-cell contacts. The extracellular loop 2 (ECL2; conserved Cys321, Cys335) trans-oligomerized between three opposing cells. Substitutions of these residues caused bicellular localization. Cys362 in transmembrane domain 4 contributed to bicellular heterophilic cis-interactions along the cell membrane with claudin-1 and marvelD3, while Cys395 in the cytosolic C-terminal tail promoted homophilic tricellullar cis-interactions. The Cys sites included in homo-/heterophilic bi-/tricellular cis-/trans-interactions contributed to cell barrier tightness for small/large molecules. Tricellulin forms TJs via trans- and cis-association in 3-cell contacts, as demonstrated electron and quantified fluorescence microscopically; it tightens 3- and 2-cell contacts. Tricellulin's ECL2 specifically seals 3-cell contacts redox dependently; a structural model is proposed. TAMP ECL2 and claudins' ECL1 share functionally and structurally similar features involved in homo-/heterophilic tightening of cell-cell contacts. Tricellulin is a specific redox sensor and sealing element at 3-cell contacts and may compensate as a redox mediator for occludin loss at 2-cell contacts in vivo and in vitro. Molecular interaction mechanisms were proposed that contribute to tricellulin's function. In conclusion, tricellulin is a junctional redox regulator for ischemia-related alterations.

Density functional theory studies on the structures and water-exchange reactions of aqueous Al(III)-oxalate complexes.

PubMed

Jin, Xiaoyan; Yan, Yu; Shi, Wenjing; Bi, Shuping

2011-12-01

The structures and water-exchange reactions of aqueous aluminum-oxalate complexes are investigated using density functional theory. The present work includes (1) The structures of Al(C(2)O(4))(H(2)O)(4)(+) and Al(C(2)O(4))(2)(H(2)O)(2)(-) were optimized at the level of B3LYP/6-311+G(d,p). The geometries obtained suggest that the Al-OH(2) bond lengths trans to C(2)O(4)(2-) ligand in Al(C(2)O(4))(H(2)O)(4)(+) are much longer than the Al-OH(2) bond lengths cis to C(2)O(4)(2-). For Al(C(2)O(4))(2)(H(2)O)(2)(-), the close energies between cis and trans isomers imply the coexistence in aqueous solution. The (27)Al NMR and (13)C NMR chemical shifts computed with the consideration of sufficient solvent effect using HF GIAO method and 6-311+G(d,p) basis set are in agreement with the experimental values available, indicating the appropriateness of the applied models; (2) The water-exchange reactions of Al(III)-oxalate complexes were simulated at the same computational level. The results show that water exchange proceeds via dissociative pathway and the activation energy barriers are sensitive to the solvent effect. The energy barriers obtained indicate that the coordinated H(2)O cis to C(2)O(4)(2-) in Al(C(2)O(4))(H(2)O)(4)(+) is more labile than trans H(2)O. The water-exchange rate constants (k(ex)) of trans- and cis-Al(C(2)O(4))(2)(H(2)O)(2)(-) were estimated by four methods and their respective characteristics were explored; (3) The significance of the study on the aqueous aluminum-oxalate complexes to environmental chemistry is discussed. The influences of ubiquitous organic ligands in environment on aluminum chemistry behavior can be elucidated by extending this study to a series of Al(III)-organic system.