Soft-commutated direct current motor

DOEpatents

Hsu, John S.

1999-01-01

A method and circuit is disclosed for soft-commutation of a direct current (DC) motor. An attenuation circuit is connected through auxiliary brushes A, A', B and B' to the commutator (16) to drain circuit from successive armature coils (15) before the main brushes (27, 28) disconnects from each of the coils (15). This prevents the spark generation that normally occurs in conventional DC motors. The attenuation circuit may also be connected before energization of the coil (15) for a soft turning on operation.

Soft-commutated direct current motor

DOEpatents

Hsu, J.S.

1999-07-27

A method and circuit is disclosed for soft-commutation of a direct current (DC) motor. An attenuation circuit is connected through auxiliary brushes A, A[prime], B and B[prime] to the commutator (16) to drain circuit from successive armature coils (15) before the main brushes (27, 28) disconnects from each of the coils (15). This prevents the spark generation that normally occurs in conventional DC motors. The attenuation circuit may also be connected before energization of the coil (15) for a soft turning on operation. 13 figs.

A CSMP Commutation Model for Design Study of a Brushless DC Motor Power Conditioner for a Cruise Missile Fin Control Actuator.

DTIC Science & Technology

1985-06-01

STUDY OF A BRUSHLESS DC MOTOR POWER CONDITIONER FOR A CRUISE MISSILE FIN CONTROL ACTUATOR CA. by Peter Norman MacMillan June 1985 Thesis Advisor: A...TYPE OF REPORT & PERIOD COVERED A CSMP Commutation Model for Design Master’s Thesis Study of a Brushless DC Motor Power June, 1985 Conditioner for a...tactical missiles. A dynamic equivalent circuit model for the analysis of a small four pole brushless DC motor fed ty a transistorized power conditioner

Advanced axial field D.C. motor development for electric passenger vehicle

NASA Technical Reports Server (NTRS)

Jones, W. J.

1982-01-01

A wound-field axial-flux dc motor was developed for an electric vehicle drive system. The motor is essentially an axial-flux version of the classical Gramme-ring winding motor, but the active conductors are recessed into slots cut into the two opposite faces of the laminated tape-wound core ring. Three motors were built and tested in the program. The second (functional) model was a six-pole machine which weighed 88.5 kg. It developed 16.9 km (33.0 hp), and a max speed of 4800 rpm. Full load efficiency was 92% and predicted SAE D-cycle efficiency was 88%. The last engineering) model was a 4-pole machine with compoles, allowing a weight reduction to 45 kg (100 lbs.) while addressing some manufacturability problems. The engineering model was rated at 13.2 kw (17.6 hp) at 3000 rpm, with a peak power of 19.8 km (26.4 hp) and a max speed of 7200 rpm. Initial test results on this motor showed poor commutation and efficiency; the program was terminated without resolution of these problems.

Dynamically Timed Electric Motor

NASA Technical Reports Server (NTRS)

Casper, Ann M. (Inventor)

1997-01-01

A brushless DC motor including a housing having an end cap secured thereto. The housing encloses a rotor. a stator and a rotationally displaceable commutation board having sensors secured thereon and spaced around the periphery of the rotor. An external rotational force is applied to the commutation board for displacement of the sensors to various positions whereby varying feedback signals are generated by the positioning of the sensors relative to the rotating rotor. The commutation board is secured in a fixed position in response to feedback signals indicative of optimum sensor position being determined. The rotation of the commutation board and the securing of the sensors in the desired fixed position is accomplished without requiring the removal of the end cap and with the DC motor operating.

Implementation of a MFAC based position sensorless drive for high speed BLDC motors with nonideal back EMF.

PubMed

Li, Haitao; Ning, Xin; Li, Wenzhuo

2017-03-01

In order to improve the reliability and reduce power consumption of the high speed BLDC motor system, this paper presents a model free adaptive control (MFAC) based position sensorless drive with only a dc-link current sensor. The initial commutation points are obtained by detecting the phase of EMF zero-crossing point and then delaying 30 electrical degrees. According to the commutation error caused by the low pass filter (LPF) and other factors, the relationship between commutation error angle and dc-link current is analyzed, a corresponding MFAC based control method is proposed, and the commutation error can be corrected by the controller in real time. Both the simulation and experimental results show that the proposed correction method can achieve ideal commutation effect within the entire operating speed range. Copyright © 2016 ISA. Published by Elsevier Ltd. All rights reserved.

New propulsion components for electric vehicles

NASA Technical Reports Server (NTRS)

Secunde, R. R.

1982-01-01

Improved component technology is described. This includes electronically commutated permanent magnet motors of both drum and disk configurations, an unconventional brush commutated motor, ac induction motors, various controllers, transmissions and complete systems. One or more of these approaches to electric vehicle propulsion may eventually displace presently used controllers and brush commutated dc motors.

Brief analysis of Jiangsu grid security and stability based on multi-infeed DC index in power system

NASA Astrophysics Data System (ADS)

Zhang, Wenjia; Wang, Quanquan; Ge, Yi; Huang, Junhui; Chen, Zhengfang

2018-02-01

The impact of Multi-infeed HVDC has gradually increased to security and stability operating in Jiangsu power grid. In this paper, an appraisal method of Multi-infeed HVDC power grid security and stability is raised with Multi-Infeed Effective Short Circuit Ratio, Multi-Infeed Interaction Factor and Commutation Failure Immunity Index. These indices are adopted in security and stability simulating calculation of Jiangsu Multi-infeed HVDC system. The simulation results indicate that Jiangsu power grid is operating with a strong DC system. It has high level of power grid security and stability, and meet the safety running requirements. Jinpin-Suzhou DC system is located in the receiving end with huge capacity, which is easily leading to commutation failure of the transmission line. In order to resolve this problem, dynamic reactive power compensation can be applied in power grid near Jinpin-Suzhou DC system. Simulation result shows this method is feasible to commutation failure.

Dynamically timed electric motor

NASA Technical Reports Server (NTRS)

Casper, Ann M. (Inventor)

1994-01-01

The invention disclosed in this document is a brushless DC motor including a housing having an end cap secured thereto. The housing encloses a rotor, a stator and a rotationally displaceable commutation board having 5 sensors secured thereon and spaced around the periphery of the rotor. An external rotational force is applied to the commutation board for displacement of the sensors to various positions whereby varying feedback signals are generated by the positioning of the sensors relative to the rotating rotor. The commutation board is secured in a fixed position in response to feedback signals indicative of optimum sensor position being determined. The rotation of the commutation board and the securing of the sensors in the desired fixed position is accomplished without requiring the removal of the 5 end cap and with the DC motor operating.

Regenerative flywheel energy storage system. Volume 3: Life cycle and cost-benefit analysis of a battery-flywheel electric car

NASA Astrophysics Data System (ADS)

1980-06-01

Fabrication of the inductor motor, the flywheel, the power conditioner, and the system control is described. Test results of the system operating over the SAE j227a Schedule D driving cycle are given and are compared to the calculated value. The flywheel energy storage system consists of a solid rotor, synchronous, inductor-type, flywheel drive machine electrically coupled to a dc battery electric propulsion system through a load-commutated inverter. The motor/alernator unit is coupled mechanically to a small steel flywheel which provides a portion of the vehicle's accelerating energy and regenerates the vehicle's braking energy. Laboratory simulation of the electric vehicle propulsion system included a 108 volt, lead-acid battery bank and a separately excited dc propulsion motor coupled to a flywheel and generator which simulate the vehicle's inertia and losses.

New propulsion components for electric vehicles

NASA Astrophysics Data System (ADS)

Secunde, R. R.

Improved component technology is described. This includes electronically commutated permanent magnet motors of both drum and disk configurations, an unconventional brush commutated motor, ac induction motors, various controllers, transmissions and complete systems. One or more of these approaches to electric vehicle propulsion may eventually displace presently used controllers and brush commutated dc motors. Previously announced in STAR as N83-25982

New propulsion components for electric vehicles

NASA Technical Reports Server (NTRS)

Secunde, R. R.

1983-01-01

Improved component technology is described. This includes electronically commutated permanent magnet motors of both drum and disk configurations, an unconventional brush commutated motor, ac induction motors, various controllers, transmissions and complete systems. One or more of these approaches to electric vehicle propulsion may eventually displace presently used controllers and brush commutated dc motors. Previously announced in STAR as N83-25982

Method and system for a gas tube-based current source high voltage direct current transmission system

DOEpatents

She, Xu; Chokhawala, Rahul Shantilal; Bray, James William; Sommerer, Timothy John; Zhou, Rui; Zhang, Di

2017-08-29

A high-voltage direct-current (HVDC) transmission system includes an alternating current (AC) electrical source and a power converter channel that includes an AC-DC converter electrically coupled to the electrical source and a DC-AC inverter electrically coupled to the AC-DC converter. The AC-DC converter and the DC-AC inverter each include a plurality of legs that includes at least one switching device. The power converter channel further includes a commutating circuit communicatively coupled to one or more switching devices. The commutating circuit is configured to "switch on" one of the switching devices during a first portion of a cycle of the H-bridge switching circuits and "switch off" the switching device during a second portion of the cycle of the first and second H-bridge switching circuits.

Trends and determinants of cycling in the Washington, DC region.

DOT National Transportation Integrated Search

2011-01-01

This report analyzes cycling trends, policies, and commuting in the Washington, DC area. The analysis is divided into two parts. : Part 1 focuses on cycling trends and policies in Washington (DC), Alexandria (VA), Arlington County (VA), Fairfax Count...

Development, Integration and Testing of Automated Triggering Circuit for Hybrid DC Circuit Breaker

NASA Astrophysics Data System (ADS)

Kanabar, Deven; Roy, Swati; Dodiya, Chiragkumar; Pradhan, Subrata

2017-04-01

A novel concept of Hybrid DC circuit breaker having combination of mechanical switch and static switch provides arc-less current commutation into the dump resistor during quench in superconducting magnet operation. The triggering of mechanical and static switches in Hybrid DC breaker can be automatized which can effectively reduce the overall current commutation time of hybrid DC circuit breaker and make the operation independent of opening time of mechanical switch. With this view, a dedicated control circuit (auto-triggering circuit) has been developed which can decide the timing and pulse duration for mechanical switch as well as static switch from the operating parameters. This circuit has been tested with dummy parameters and thereafter integrated with the actual test set up of hybrid DC circuit breaker. This paper deals with the conceptual design of the auto-triggering circuit, its control logic and operation. The test results of Hybrid DC circuit breaker using this circuit have also been discussed.

Operating characteristic analysis of a 400 mH class HTS DC reactor in connection with a laboratory scale LCC type HVDC system

NASA Astrophysics Data System (ADS)

Kim, Sung-Kyu; Kim, Kwangmin; Park, Minwon; Yu, In-Keun; Lee, Sangjin

2015-11-01

High temperature superconducting (HTS) devices are being developed due to their advantages. Most line commutated converter based high voltage direct current (HVDC) transmission systems for long-distance transmission require large inductance of DC reactor; however, generally, copper-based reactors cause a lot of electrical losses during the system operation. This is driving researchers to develop a new type of DC reactor using HTS wire. The authors have developed a 400 mH class HTS DC reactor and a laboratory scale test-bed for line-commutated converter type HVDC system and applied the HTS DC reactor to the HVDC system to investigate their operating characteristics. The 400 mH class HTS DC reactor is designed using a toroid type magnet. The HVDC system is designed in the form of a mono-pole system with thyristor-based 12-pulse power converters. In this paper, the investigation results of the HTS DC reactor in connection with the HVDC system are described. The operating characteristics of the HTS DC reactor are analyzed under various operating conditions of the system. Through the results, applicability of an HTS DC reactor in an HVDC system is discussed in detail.

Development of ATC for High Speed and High Density Commuter Line

NASA Astrophysics Data System (ADS)

Okutani, Tamio; Nakamura, Nobuyuki; Araki, Hisato; Irie, Shouji; Osa, Hiroki; Sano, Minoru; Ikeda, Keigo; Ozawa, Hiroyuki

A new ATC (Automatic Train Control) system has been developed with solutions to realize short train headway by assured braking utilizing digital data transmission via rails; the digital data for the ATP (Automatic Train Protection) function; and to achieve EMC features for both AC and DC sections. The DC section is of the unprecedented DC traction power supply system utilizing IGBT PWM converter at all DC substations. Within the AC section, train traction force is controlled by PWM converter/inverters. The carrier frequencies of the digital data signals and chopping frequency of PWM traction power converters on-board are decided via spectral analysis of noise up to degraded mode cases of equipment. Developed system was equipped to the Tukuba Express Line, new commuter line of Tokyo metropolitan area, and opened since Aug. 2005.

Low speed phaselock speed control system. [for brushless dc motor

NASA Technical Reports Server (NTRS)

Fulcher, R. W.; Sudey, J. (Inventor)

1975-01-01

A motor speed control system for an electronically commutated brushless dc motor is provided which includes a phaselock loop with bidirectional torque control for locking the frequency output of a high density encoder, responsive to actual speed conditions, to a reference frequency signal, corresponding to the desired speed. The system includes a phase comparator, which produces an output in accordance with the difference in phase between the reference and encoder frequency signals, and an integrator-digital-to-analog converter unit, which converts the comparator output into an analog error signal voltage. Compensation circuitry, including a biasing means, is provided to convert the analog error signal voltage to a bidirectional error signal voltage which is utilized by an absolute value amplifier, rotational decoder, power amplifier-commutators, and an arrangement of commutation circuitry.

Mechanism For Adjustment Of Commutation Of Brushless Motor

NASA Technical Reports Server (NTRS)

Schaefer, Richard E.

1995-01-01

Mechanism enables adjustment of angular position of set of Hall-effect devices that sense instantaneous shaft angle of brushless dc motor. Outputs of sensors fed to commutation circuitry. Measurement of shaft angle essential for commutation; that is, application of voltage to stator windings must be synchronized with shaft angle. To obtain correct angle measurement for commutation, Hall-effect angle sensors positioned at proper reference angle. The present mechanism accelerates adjustment procedure and makes it possible to obtain more accurate indication of minimum-current position because it provides for adjustment while motor running.

Modeling and real time simulation of an HVDC inverter feeding a weak AC system based on commutation failure study.

PubMed

Mankour, Mohamed; Khiat, Mounir; Ghomri, Leila; Chaker, Abdelkader; Bessalah, Mourad

2018-06-01

This paper presents modeling and study of 12-pulse HVDC (High Voltage Direct Current) based on real time simulation where the HVDC inverter is connected to a weak AC system. In goal to study the dynamic performance of the HVDC link, two serious kind of disturbance are applied at HVDC converters where the first one is the single phase to ground AC fault and the second one is the DC link to ground fault. The study is based on two different mode of analysis, which the first is to test the performance of the DC control and the second is focalized to study the effect of the protection function on the system behavior. This real time simulation considers the strength of the AC system to witch is connected and his relativity with the capacity of the DC link. The results obtained are validated by means of RT-lab platform using digital Real time simulator Hypersim (OP-5600), the results carried out show the effect of the DC control and the influence of the protection function to reduce the probability of commutation failures and also for helping inverter to take out from commutation failure even while the DC control fails to eliminate them. Copyright © 2018 ISA. Published by Elsevier Ltd. All rights reserved.

Method and system for a gas tube switch-based voltage source high voltage direct current transmission system

DOE Office of Scientific and Technical Information (OSTI.GOV)

She, Xu; Chokhawala, Rahul Shantilal; Zhou, Rui

A voltage source converter based high-voltage direct-current (HVDC) transmission system includes a voltage source converter (VSC)-based power converter channel. The VSC-based power converter channel includes an AC-DC converter and a DC-AC inverter electrically coupled to the AC-DC converter. The AC-DC converter and a DC-AC inverter include at least one gas tube switching device coupled in electrical anti-parallel with a respective gas tube diode. The VSC-based power converter channel includes a commutating circuit communicatively coupled to one or more of the at least one gas tube switching devices. The commutating circuit is configured to "switch on" a respective one of themore » one or more gas tube switching devices during a first portion of an operational cycle and "switch off" the respective one of the one or more gas tube switching devices during a second portion of the operational cycle.« less

Using a micromachined magnetostatic relay in commutating a DC motor

NASA Technical Reports Server (NTRS)

Tai, Yu-Chong (Inventor); Wright, John A. (Inventor); Lilienthal, Gerald (Inventor)

2004-01-01

A DC motor is commutated by rotating a magnetic rotor to induce a magnetic field in at least one magnetostatic relay in the motor. Each relay is activated in response to the magnetic field to deliver power to at least one corresponding winding connected to the relay. In some cases, each relay delivers power first through a corresponding primary winding and then through a corresponding secondary winding to a common node. Specific examples include a four-pole, three-phase motor in which each relay is activated four times during one rotation of the magnetic rotor.

Brushless direct-current motor with stationary armature and field

NASA Technical Reports Server (NTRS)

Studer, P. A.

1970-01-01

Electronically commutated dc motor has an active fixed field winding, and active fixed armature winding, and passive rotor. By use of brushless dc motor switching technique, motor provides continuous controllable and reversible torque without use of sliding contacts.

Microcomputer control of an electronically commutated dc motor

NASA Astrophysics Data System (ADS)

El-Sharkawi, M. A.; Coleman, J. S.; Mehdi, I. S.; Sommer, D. L.

A microcomputer control system for an electronically commutated dc motor (ECM) has been designed, built and tested. A 3-hp, 270-volt, samarium-cobalt brushless dc motor is controlled by an Intel 8086-based microcomputer. The main functions of the microcomputer are to control the speed of the motor, to provide forward or reverse rotation, to brake, and to protect the motor and its power electronic switching circuits from overcurrents. The necessary interface circuits were designed and built, and the system components have been integrated and tested. It is shown that the proposed ECM system with the microcomputer control operate the motor reliably over a wide range of speeds. The purpose of this effort is to develop the motorcontroller for driving electromechanical actuators for flight control and other aircraft applications.

Commuter Air Carrier Symposium (2nd) January 15-16, 1981 .

DTIC Science & Technology

1981-01-16

AJAN B1 UNCLASSIFIED FAA-ASF-300-81-b NL J , E EEEIEEEI mIhIhhEIhEEEI EEIhIhEIhEEIhE IIIIIIIIIIIIIu IIIEII~lElI Second ot Denrpotmn A Fodeol~(ntiorpom...Kathryn B. Creedy AVMARK, Inc. Commuter Air 1120 19th St., N.W. 4827 Rugby Ave. Washington, D.C. 20002 Bethesda, MD 20008 J. Keith Carter Albert J...Commuter Air Piper Aircraft Corp. 4823 Rugby Rd. 3000 Medulla Rd. Bethesda, MD 20014 Lakeland, Florida 33803 -Calvin Davison ’ Crowell & Moring 1100

Pulse Width Modulator Controller Design for a Brushless DC Motor Position Servo.

DTIC Science & Technology

1987-06-01

C. POWER CONDITIONER SIMULATION Accurate modeling of power conditioning and commutation in brushless dc motors requires explicit definition of the...Study of a Brushless DC Motor Power Conditioner for a Cruise Missile Fin Control Actuator, Master’s Thesis, Naval Postgraduate School, Monterey, Ca...DESIGN FOR A BRUSHLESS DC MOTOR POSITION SERVO by Vincent S. Rossitto June 1987 Thesis Advisor: Alex Gerba, Jr. Approved for public release

Regenerative flywheel storage system, volume 2

NASA Astrophysics Data System (ADS)

1980-06-01

A vehicle propulsion system was simulated on a digital computer in order to determine the optimum system operating strategies and to establish a calculated range improvement over a nonregenerative, all electric vehicle. Fabrication of the inductor motor, the flywheel, the power conditioner, and the system control are described. Test results of the system operating over the SAE J227a Schedule D driving cycle are given and are compared to the calculated value. The flywheel energy storage system consists of a solid rotor, synchronous, inductor type, flywheel drive machine electrically coupled to a dc battery electric propulsion system through a load commutated inverter. The motor/alternator unit is coupled mechanically to a small steel flywheel which provides a portion of the vehicle's accelerating energy and regenerates the vehicle's braking energy.

Computerized Torque Control for Large dc Motors

NASA Technical Reports Server (NTRS)

Willett, Richard M.; Carroll, Michael J.; Geiger, Ronald V.

1987-01-01

Speed and torque ranges in generator mode extended. System of shunt resistors, electronic switches, and pulse-width modulation controls torque exerted by large, three-phase, electronically commutated dc motor. Particularly useful for motor operating in generator mode because it extends operating range to low torque and high speed.

Investigation of DC hybrid circuit breaker based on high-speed switch and arc generator

NASA Astrophysics Data System (ADS)

Wu, Yifei; Rong, Mingzhe; Wu, Yi; Yang, Fei; Li, Mei; Zhong, Jianying; Han, Guohui; Niu, Chunping; Hu, Yang

2015-02-01

A new design of DC hybrid circuit breaker based on high-speed switch (HSS) and arc generator (AG), which can drastically profit from low heat loss in normal state and fast current breaking under fault state, is presented and analyzed in this paper. AG is designed according to the magnetic pinch effect of liquid metal. By utilizing the arc voltage generated across AG, the fault current is rapidly commutated from HSS into parallel connected branch. As a consequence, the arcless open of HSS is achieved. The post-arc conducting resume time (Δ tc) of AG and the commutation original voltage (Uc), two key factors in the commutation process, are investigated experimentally. Particularly, influences of the liquid metal channel diameter (Φ) of AG, fault current rate of rise (di/dt) and Uc on Δ tc are focused on. Furthermore, a suitable Uc is determined during the current commutation process, aiming at the reliable arcless open of HSS and short breaking time. Finally, the fault current breaking test is carried out for the current peak value of 11.8 kA, and the validity of the design is confirmed by the experimental results.

Investigation of DC hybrid circuit breaker based on high-speed switch and arc generator.

PubMed

Wu, Yifei; Rong, Mingzhe; Wu, Yi; Yang, Fei; Li, Mei; Zhong, Jianying; Han, Guohui; Niu, Chunping; Hu, Yang

2015-02-01

A new design of DC hybrid circuit breaker based on high-speed switch (HSS) and arc generator (AG), which can drastically profit from low heat loss in normal state and fast current breaking under fault state, is presented and analyzed in this paper. AG is designed according to the magnetic pinch effect of liquid metal. By utilizing the arc voltage generated across AG, the fault current is rapidly commutated from HSS into parallel connected branch. As a consequence, the arcless open of HSS is achieved. The post-arc conducting resume time (Δ tc) of AG and the commutation original voltage (Uc), two key factors in the commutation process, are investigated experimentally. Particularly, influences of the liquid metal channel diameter (Φ) of AG, fault current rate of rise (di/dt) and Uc on Δ tc are focused on. Furthermore, a suitable Uc is determined during the current commutation process, aiming at the reliable arcless open of HSS and short breaking time. Finally, the fault current breaking test is carried out for the current peak value of 11.8 kA, and the validity of the design is confirmed by the experimental results.

DC drive system for cine/pulse cameras

NASA Technical Reports Server (NTRS)

Gerlach, R. H.; Sharpsteen, J. T.; Solheim, C. D.; Stoap, L. J.

1977-01-01

Camera-drive functions are separated mechanically into two groups which are driven by two separate dc brushless motors. First motor, a 90 deg stepper, drives rotating shutter; second electronically commutated motor drives claw and film transport. Shutter is made of one piece but has two openings for slow and fast exposures.

Electric vehicle motors and controllers

NASA Technical Reports Server (NTRS)

Secunde, R. R.

1981-01-01

Improved and advanced components being developed include electronically commutated permanent magnet motors of both drum and disk configuration, an unconventional brush commutated motor, and ac induction motors and various controllers. Test results on developmental motors, controllers, and combinations thereof indicate that efficiencies of 90% and higher for individual components, and 80% to 90% for motor/controller combinations can be obtained at rated power. The simplicity of the developmental motors and the potential for ultimately low cost electronics indicate that one or more of these approaches to electric vehicle propulsion may eventually displace presently used controllers and brush commutated dc motors.

Electric vehicle motors and controllers

NASA Astrophysics Data System (ADS)

Secunde, R. R.

Improved and advanced components being developed include electronically commutated permanent magnet motors of both drum and disk configuration, an unconventional brush commutated motor, and ac induction motors and various controllers. Test results on developmental motors, controllers, and combinations thereof indicate that efficiencies of 90% and higher for individual components, and 80% to 90% for motor/controller combinations can be obtained at rated power. The simplicity of the developmental motors and the potential for ultimately low cost electronics indicate that one or more of these approaches to electric vehicle propulsion may eventually displace presently used controllers and brush commutated dc motors.

DC3 | Department of Defense Cyber Crime Center (DC3)

Science.gov Websites

to federal civil service. Please visit the Office of Personnel Management's American Veteran's the close proximity of our facilities. EARLY RELEASE: An early release may be announced when driving arrival is authorized when roads in the commuting area are hazardous and employees are authorized

Methods, systems and apparatus for controlling operation of two alternating current (AC) machines

DOEpatents

Gallegos-Lopez, Gabriel [Torrance, CA; Nagashima, James M [Cerritos, CA; Perisic, Milun [Torrance, CA; Hiti, Silva [Redondo Beach, CA

2012-02-14

A system is provided for controlling two AC machines. The system comprises a DC input voltage source that provides a DC input voltage, a voltage boost command control module (VBCCM), a five-phase PWM inverter module coupled to the two AC machines, and a boost converter coupled to the inverter module and the DC input voltage source. The boost converter is designed to supply a new DC input voltage to the inverter module having a value that is greater than or equal to a value of the DC input voltage. The VBCCM generates a boost command signal (BCS) based on modulation indexes from the two AC machines. The BCS controls the boost converter such that the boost converter generates the new DC input voltage in response to the BCS. When the two AC machines require additional voltage that exceeds the DC input voltage required to meet a combined target mechanical power required by the two AC machines, the BCS controls the boost converter to drive the new DC input voltage generated by the boost converter to a value greater than the DC input voltage.

Simulation and Performance of Brushless DC Motor Actuators.

DTIC Science & Technology

1985-12-01

4. MacMillan, P.M., "A CSMP Commutation Model for Design Study of a ’.... Brushless DC Motor Power Conditioner for a Cruise Missile Fin Control...8217. ,. ~-4..T NPS69-85-028 .r * N NAVAL POSTGRADUATE SCHOOL Monterey, California DTIC FEB4 1986 SIMULATION AND PERFORMANCE OF BRUSHLESS DC...S. TYPE OF REPORT & PERIOD COVERED Progress Re rSimulation and Performance of Brushless DCPrgesRpt Motor Actuators 111 PERFORMING ORG. REPORT NUMBER

Commuter Air Carrier Loan Guarantee Study.

DTIC Science & Technology

1980-01-01

Aircraft on Order o Financial Statements o Profit & Loss Statement " Balance Sheet o Financial Position Change Statement o General Topics o Reasons...financial data on commuters is very limited, it was necessary to assemble information from a number of sources such as the (divil Aeronautics Board...PROGRAM Assisted by SMS Associates of Washington, D.C., Aerospace has: (1) developed current acquisition and operating cost data on new, used, and planned

AC/DC current ratio in a current superimposition variable flux reluctance machine

NASA Astrophysics Data System (ADS)

Kohara, Akira; Hirata, Katsuhiro; Niguchi, Noboru; Takahara, Kazuaki

2018-05-01

We have proposed a current superimposition variable flux reluctance machine for traction motors. The torque-speed characteristics of this machine can be controlled by increasing or decreasing the DC current. In this paper, we discuss an AC/DC current ratio in the current superimposition variable flux reluctance machine. The structure and control method are described, and the characteristics are computed using FEA in several AC/DC ratios.

Derailing healthy choices: an audit of vending machines at train stations in NSW.

PubMed

Kelly, Bridget; Flood, Victoria M; Bicego, Cecilia; Yeatman, Heather

2012-04-01

Train stations provide opportunities for food purchases and many consumers are exposed to these venues daily, on their commute to and from work. This study aimed to describe the food environment that commuters are exposed to at train stations in NSW. One hundred train stations were randomly sampled from the Greater Sydney Metropolitan region, representing a range of demographic areas. A purpose-designed instrument was developed to collect information on the availability, promotion and cost of food and beverages in vending machines. Items were classified as high/low in energy according to NSW school canteen criteria. Of the 206 vending machines identified, 84% of slots were stocked with high-energy food and beverages. The most frequently available items were chips and extruded snacks (33%), sugar-sweetened soft drinks (18%), chocolate (12%) and confectionery (10%). High energy foods were consistently cheaper than lower-energy alternatives. Transport sites may cumulatively contribute to excess energy consumption as the items offered are energy dense. Interventions are required to improve train commuters' access to healthy food and beverages.

A CSMP commutation model for design study of a brushless dc motor power conditioner for a cruise missile fin control actuator

NASA Astrophysics Data System (ADS)

MacMillan, P. N.

1985-06-01

Recent improvements in rare earth magnets have made it possible to construct strong, lightweight, high horsepower dc motors. This has occasioned a reassessment of electromechanical actuators as alternatives to comparable pneumatic and hydraulic systems for use as flight control actuators for tactical missiles. A dynamic equivalent circuit model for the analysis of a small four pole brushless dc motor fed by a transistorized power conditioner utilizing high speed switching power transistors as final elements is presented. The influence of electronic commutation on instantaneous dynamic motor performance is particularly demonstrated and good correlation between computer simulation and typical experimentally obtained performance data is achieved. The model is implemented in CSMP language and features more accurate air gap flux representation over previous work. Hall effect sensor rotor position feedback is simulated. Both constant and variable air gap flux is modeled and the variable flux model treats the flux as a fundamental and one harmonic.

Transformerless dc-Isolated Converter

NASA Technical Reports Server (NTRS)

Rippel, Wally E.

1987-01-01

Efficient voltage converter employs capacitive instead of transformer coupling to provide dc isolation. Offers buck/boost operation, minimal filtering, and low parts count, with possible application in photovoltaic power inverters, power supplies and battery charges. In photovoltaic inverter circuit with transformerless converter, Q2, Q3, Q4, and Q5 form line-commutated inverter. Switching losses and stresses nil because switching performed when current is zero.

Low-drag electrical-contact arrangement for maintaining continuity between horizontally movable members

DOEpatents

Brown, R.J.; Gerth, H.L.; Robinson, S.C.

1981-01-23

This invention is a low-drag electrical contact arrangement for establishing continuity between upper and lower spaced members which are subject to relative horizontal movement. In one aspect, the invention comprises an electrical commutating arrangement which includes a horizontally disposed linear electrical commutator. A horizontally movable electrically conductive pedestal is positioned below the commutator and defines a clearance therewith. The pedestal is formed with a cavity confronting the commutator. In the cavity is a bead of electrical conductive liquid, the bead being characterized by an upwardly convex meniscus portion which extends across the clearance and contacts the commutator. The surface tension of the bead is sufficient to maintain the bead intact when the commutator and pedestal are displaced horizontally at speeds from zero to at least twelve inches a minute. This arrangement provides a significant advance in highly precise machining processes, such as diamond-turning, where precision is limited by the drag imposed by conventional commutators of the carbon-brush type.

Low-drag electrical contact arrangement for maintaining continuity between horizontally movable members

DOEpatents

Brown, R. Jack; Gerth, Howard L.; Robinson, Samuel C.

1982-01-01

This invention is a low-drag electrical contact arrangement for establishing continuity between upper and lower spaced members which are subject to relative horizontal movement. In one aspect, the invention comprises an electrical commutating arrangement which includes a horizontally disposed linear electrical commutator. A horizontally movable electrically conductive pedestal is positioned below the commutator and defines a clearance therewith. The pedestal is formed with a cavity confronting the commutator. In the cavity is a bead of electrical conductive liquid, the bead being characterized by an upwardly convex meniscus portion which extends across the clearance and contacts the commutator. The surface tension of the bead is sufficient to maintain the bead intact when the commutator and pedestal are displaced horizontally at speeds from zero to at least twelve inches a minute. This arrangement provides a significant advance in highly precise machining processes, such as diamond-turning, where precision is limited by the drag imposed by conventional commutators of the carbon-brush type.

Powerplexer

NASA Technical Reports Server (NTRS)

Woods, J. M. (Inventor)

1973-01-01

An electrical power distribution system is described for use in providing different dc voltage levels. A circuit is supplied with DC voltage levels and commutates pulses for timed intervals onto a pair of distribution wires. The circuit is driven by a command generator which places pulses on the wires in a timed sequence. The pair of wires extend to voltage strippers connected to the various loads. The voltage strippers each respond to the pulse dc levels on the pair of wires and form different output voltages communicated to each load.

Constant power speed range extension of surface mounted PM motors

DOEpatents

Lawler, Jack Steward; Bailey, John Milton

2001-01-01

A circuit and method for controlling a rotating machine (11) in the constant horsepower range above base speed uses an inverter (15) having SCR's (T1-T6) connected in series with the primary commutation switches (Q1-Q6) to control turn off of the primary commutation switches and to protect the primary commutation switches from faults. The primary commutation switches (Q1-Q6) are controlled by a controller (14), to fire in advance or after a time when the back emf equals the applied voltage, and then to turn off after a precise dwell time, such that suitable power is developed at speeds up to at least six times base speed.

Rotating turkeys and self-commutating artificial muscle motors

NASA Astrophysics Data System (ADS)

O'Brien, Benjamin M.; McKay, Thomas G.; Gisby, Todd A.; Anderson, Iain A.

2012-02-01

Electrostatic motors—first used by Benjamin Franklin to rotisserie a turkey—are making a comeback in the form of high energy density dielectric elastomer artificial muscles. We present a self-commutated artificial muscle motor that uses dielectric elastomer switches in the place of bulky external electronics. The motor simply requires a DC input voltage to rotate a shaft (0.73 Nm/kg, 0.24 Hz) and is a step away from hard metallic electromagnetic motors towards a soft, light, and printable future.

Development of a drive system for a sequential space camera

NASA Technical Reports Server (NTRS)

Sharpsteen, J. T.; Solheim, C. D.; Stoap, L. J.

1976-01-01

An electronically commutated dc motor is reported for driving the camera claw and magazine, and a stepper motor is described for driving the shutter with the two motors synchronized electrically. Subsequent tests on the breadboard positively proved the concept, but further development beyond this study should be done. The breadboard testing also established that the electronically commutated motor can control speed over a wide dynamic range, and has a high torque capability for accelerating loads. This performance suggested the possibility of eliminating the clutch from the system while retaining all of the other mechanical features of the DAC, if the requirement for independent shutter speeds and frame rates can be removed. Therefore, as a final step in the study, the breadboard shutter and shutter drive were returned to the original DAC configuration, while retaining the brushless dc motor drive.

Multilevel DC link inverter

DOEpatents

Su, Gui-Jia

2003-06-10

A multilevel DC link inverter and method for improving torque response and current regulation in permanent magnet motors and switched reluctance motors having a low inductance includes a plurality of voltage controlled cells connected in series for applying a resulting dc voltage comprised of one or more incremental dc voltages. The cells are provided with switches for increasing the resulting applied dc voltage as speed and back EMF increase, while limiting the voltage that is applied to the commutation switches to perform PWM or dc voltage stepping functions, so as to limit current ripple in the stator windings below an acceptable level, typically 5%. Several embodiments are disclosed including inverters using IGBT's, inverters using thyristors. All of the inverters are operable in both motoring and regenerating modes.

High torque DC motor fabrication and test program

NASA Technical Reports Server (NTRS)

Makus, P.

1976-01-01

The testing of a standard iron and standard alnico permanent magnet two-phase, brushless dc spin motor for potential application to the space telescope has been concluded. The purpose of this study was to determine spin motor power losses, magnetic drag, efficiency and torque speed characteristics of a high torque dc motor. The motor was designed and built to fit an existing reaction wheel as a test vehicle and to use existing brass-board commutation and torque command electronics. The results of the tests are included in this report.

Winter weather demand considerations.

DOT National Transportation Integrated Search

2015-04-01

Winter weather has varied effects on travel behavior. Using 418 survey responses from the Northern Virginia : commuting area of Washington, D.C. and binary logit models, this study examines travel related changes under : different types of winter wea...

Electronically commutated motors for vehicle applications

NASA Astrophysics Data System (ADS)

Echolds, E. F.

1980-02-01

Two permanent magnet electronically commutated motors for electric vehicle traction are discussed. One, based on existing technology, produces 23 kW (peak) at 26,000 rpm, and 11 kW continuous at 18,000 rpm. The motor has a conventional design: a four-pole permanent magnet rotor and a three-phase stator similar to those used on ordinary induction motors. The other, advanced technology motor, is rated at 27 kW (peak) at 14,000 rpm, and 11 kW continuous at 10,500 rpm. The machine employs a permanent magnet rotor and a novel ironless stator design in an axial air gap, homopolar configuration. Comparison of the new motors with conventional brush type machines indicates potential for substantial cost savings.

Applying PWM to control overcurrents at unbalanced faults of force-commutated VSCs used as static var compensators

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jiang, Y.; Ekstroem, A.

1997-01-01

This study is devoted to investigating the possibility of controlling the overcurrent of a forced-commutated voltage source converter (VSC) by PWM when the ac system is undergoing large unbalanced disturbance. The converter is supposed to be used as a static var compensator at a high power level. A novel control strategy is proposed for controlling the reactive current and the dc side voltage independently. Digital simulation results are presented and compared with the results by using just the reactive current control with fundamental switching frequency.

Actuator Characterization of Man Portable Precision Maneuver Concepts

DTIC Science & Technology

2014-03-01

brushless DC motors, along with a model of the rotating wing concept and a prototype 40-mm projectile, which was fired through the spark range (14), is... Brushless Electronic Speed Controller) was used to drive the three motor commutator input lines. This controller inputs a pulse-width modulated (PWM...Part II: The Brushless D.C. Motor Drive. IEEE Transactions on Industry Applications 1989, 25 (2), 274–279. 16. Hemati, N.; Leu, M. A Complete

Mitigation of commutation failures in LCC-HVDC systems based on superconducting fault current limiters

NASA Astrophysics Data System (ADS)

Lee, Jong-Geon; Khan, Umer Amir; Lee, Ho-Yun; Lim, Sung-Woo; Lee, Bang-Wook

2016-11-01

Commutation failure in line commutated converter based HVDC systems cause severe damages on the entire power grid system. For LCC-HVDC, thyristor valves are turned on by a firing signal but turn off control is governed by the external applied AC voltage from surrounding network. When the fault occurs in AC system, turn-off control of thyristor valves is unavailable due to the voltage collapse of point of common coupling (PCC), which causes the commutation failure in LCC-HVDC link. Due to the commutation failure, the power transfer interruption, dc voltage drop and severe voltage fluctuation in the AC system could be occurred. In a severe situation, it might cause the protection system to block the valves. In this paper, as a solution to prevent the voltage collapse on PCC and to limit the fault current, the application study of resistive superconducting fault current limiter (SFCL) on LCC-HVDC grid system was performed with mathematical and simulation analyses. The simulation model was designed by Matlab/Simulink considering Haenam-Jeju HVDC power grid in Korea which includes conventional AC system and onshore wind farm and resistive SFCL model. From the result, it was observed that the application of SFCL on LCC-HVDC system is an effective solution to mitigate the commutation failure. And then the process to determine optimum quench resistance of SFCL which enables the recovery of commutation failure was deeply investigated.

Integrated Inverter For Driving Multiple Electric Machines

DOEpatents

Su, Gui-Jia [Knoxville, TN; Hsu, John S [Oak Ridge, TN

2006-04-04

An electric machine drive (50) has a plurality of inverters (50a, 50b) for controlling respective electric machines (57, 62), which may include a three-phase main traction machine (57) and two-phase accessory machines (62) in a hybrid or electric vehicle. The drive (50) has a common control section (53, 54) for controlling the plurality of inverters (50a, 50b) with only one microelectronic processor (54) for controlling the plurality of inverters (50a, 50b), only one gate driver circuit (53) for controlling conduction of semiconductor switches (S1-S10) in the plurality of inverters (50a, 50b), and also includes a common dc bus (70), a common dc bus filtering capacitor (C1) and a common dc bus voltage sensor (67). The electric machines (57, 62) may be synchronous machines, induction machines, or PM machines and may be operated in a motoring mode or a generating mode.

System For Characterizing Three-Phase Brushless dc Motors

NASA Technical Reports Server (NTRS)

Howard, David E.; Smith, Dennis A.

1996-01-01

System of electronic hardware and software developed to automate measurements and calculations needed to characterize electromechanical performances of three-phase brushless dc motors, associated shaft-angle sensors needed for commutation, and associated brushless tachometers. System quickly takes measurements on all three phases of motor, tachometer, and shaft-angle sensor simultaneously and processes measurements into performance data. Also useful in development and testing of motors with not only three phases but also two, four, or more phases.

Experimental and analytical study of the DC breakdown characteristics of polypropylene laminated paper with a butt gap condition considering the insulation design of superconducting cable

NASA Astrophysics Data System (ADS)

Seo, In-jin; Choi, Won; Seong, Jae-gyu; Lee, Bang-wook; Koo, Ja-yoon

2014-08-01

It has been reported that the insulation design under DC stress is considered as one of the critical factors in determining the performance of high-voltage direct current (HVDC) superconducting cable. Therefore, it is fundamentally necessary to investigate the DC breakdown characteristics of the composite insulation system consisting of liquid nitrogen (LN2)/polypropylene-laminated-paper (PPLP). In particular, the insulation characteristics under DC polarity reversal condition should be verified to understand the polarity effect of the DC voltage considering the unexpected incidents taking place at line-commutated-converters (LCC) under service at a DC power grid. In this study, to examine the variation of DC electric field strength, the step voltage and polarity reversal breakdown tests are performed under DC stress. Also, we investigate the electric field distributions in a butt gap of the LN2/PPLP condition considering the DC polarity reversal by using simulation software.

Coast Guard Compensation Alternatives.

DTIC Science & Technology

1981-12-01

private automobile to commute. Bachelor personnel were slightly more likely to use their own car or public transpor- tation than were married personnel...Command Washington, D.C. 20370 5. Director for HRM Plans and Policy (OP-150)1 Human Resource Management Division Deputy Chief of Naval Operations

Simulation and performance of brushless dc motor actuators

NASA Astrophysics Data System (ADS)

Gerba, A., Jr.

1985-12-01

The simulation model for a Brushless D.C. Motor and the associated commutation power conditioner transistor model are presented. The necessary conditions for maximum power output while operating at steady-state speed and sinusoidally distributed air-gap flux are developed. Comparison of simulated model with the measured performance of a typical motor are done both on time response waveforms and on average performance characteristics. These preliminary results indicate good agreement. Plans for model improvement and testing of a motor-driven positioning device for model evaluation are outlined.

A comparison of mobility impacts on urban commuting between broadcast advisories and advanced traveler information services

DOT National Transportation Integrated Search

2004-02-01

This report explores the effectiveness of relying on commercial radio as a source of traveler information, and presents an approach to quantify mobility benefits from radio traffic advisories. The study, conducted for the Washington, DC, metropolitan...

Power electronics for the flywheel system EMAFER

NASA Astrophysics Data System (ADS)

Offringa, Lodewijk J. J.; Sluiters, Hans E.; Smits, Eugenio J.

1988-10-01

A novel power electronic converter has been designed for the EMAFER (electromechanical accumulator for energy reuse) flywheel system to meet the requirements of the synchronous permanent magnet three-phase motor/generator drive. A new type of current source inverter with forced commutation by means of a commutation bridge has been developed and tested. This converter is capable of driving and braking the machine at full rated power in an operating range from 8,500 to 17,000 rpm. Test results are presented.

FET commutated current-FED inverter

NASA Technical Reports Server (NTRS)

Rippel, Wally E. (Inventor); Edwards, Dean B. (Inventor)

1983-01-01

A shunt switch comprised of a field-effect transistor (Q.sub.1) is employed to commutate a current-fed inverter (10) using thyristors (SCR1, SCR2) or bijunction transistors (Q.sub.2, Q.sub.3) in a full bridge (1, 2, 3, 4) or half bridge (5, 6) and transformer (T.sub.1) configuration. In the case of thyristors, a tapped inverter (12) is employed to couple the inverter to a dc source to back bias the thyristors during commutation. Alternatively, a commutation power supply (20) may be employed for that purpse. Diodes (D.sub.1, D.sub.2) in series with some voltage dropping element (resistor R.sub.12 or resistors R.sub.1, R.sub.2 or Zener diodes D.sub.4, D.sub.5) are connected in parallel with the thyristors in the half bridge and transformer configuration to assure sharing the back bias voltage. A clamp circuit comprised of a winding (18) negatively coupled to the inductor and a diode (D.sub.3) return stored energy from the inductor to the power supply for efficient operation with buck or boost mode.

Comparison between a classical command law and a new advanced recovery command law in a MCB-ARS boost

NASA Astrophysics Data System (ADS)

Petit, Pierre; Saint-Eve, Frédéric; Sawicki, Jean-Paul; Aillerie, Michel

2017-02-01

This paper focuses on an original performed command on DC-DC boosts developed for applications in the LMOPS lab for the photovoltaic energy conversion and more specifically the Photovoltaic panels connected to HVDC smart grids. This boost, commonly named MCB-ARS (Magnetically Coupled Boost with Active Recovery Switch) presents great advantages concerning the simplicity of the command on the single constitutive switch, the global efficiency and the voltage conversion ratio. A fine analysis of the losses all over the entire converter shows that losses are not distributed uniformly in the constituting components. So a previous modification described in a previous paper consisting in the conducting assistance on the power flowing intermediate diode, performed advantageously the global efficiency. The present analysis takes into account the fact that the new configuration obtained after this important improvement looks like a classical half-bridge push-pull stage and may be controlled by a twice complementary command. In that way, a comparison has been done between a natural commutation recovery diode and an assisted switch commutation driven in a push-pull mode. As attempted, the switching command laws in charge to assume the energy transfer has been compared to the classical previous system described in anterior papers, and we demonstrate in this publication that a commutation based on a push-pull command mode within the two switches of the MCB-ARS converter is possible and increases the power transfer.

Méthode de prédétermination des caractéristiques électromagnétiques de machines á bobinage global à commutation de flux. Application à un actionneur linéaire

NASA Astrophysics Data System (ADS)

Prevond, L.; Ben Ahmed, A.; Multon, B.; Lucidarme, J.

1997-06-01

This paper presents a predetermination method of Permanent Magnet (P.M.) multicellular flux switching machines. The non-linear characteristic of the ferromagnetic material is integrated in this method which combines analytical and numerical calculus. This study permits to make a fast parametrical analysis to define optimal parameters of a flux switching cell such as magnetic shear stress and flux concentration factor as function of magnetomotive force. The demagnetisation limit is introduced by a finite element calculus applied. The comparison of the theoritical results and experimental one gives a good correlation. Cet article présente une méthode de prédétermination des caractéristiques de machines multicellulaires (bobinage global) à commutation de flux (aimants permanents) en tenant compte de la non linéarité des matériaux ferromagnétiques. Cette méthode allie le calcul numérique par éléments finis et le calcul analytique. Cette étude nous a permis, d'une part, d'effectuer une analyse paramétrique intrinsèque et, d'autre part, de définir les paramètres optimaux de la cellule à commutation de flux. La notion de désaimantation est introduite en calculant le champ démagnétisant dans l'aimant. Les calculs effectués, dans le cas d'un actionneur linéaire à cômmutation de flux, montrent une bonne corrélation avec les essais directs.

An SCR inverter for electric vehicles

NASA Technical Reports Server (NTRS)

Latos, T.; Bosack, D.; Ehrlich, R.; Jahns, T.; Mezera, J.; Thimmesch, D.

1980-01-01

An inverter for an electric vehicle propulsion application has been designed and constructed to excite a polyphase induction motor from a fixed propulsion battery source. The inverter, rated at 35kW peak power, is fully regenerative and permits vehicle operation in both the forward and reverse directions. Thyristors are employed as the power switching devices arranged in a dc bus commutated topology. This paper describes the major role the controller plays in generating the motor excitation voltage and frequency to deliver performance similar to dc systems. Motoring efficiency test data for the controller are presented. It is concluded that an SCR inverter in conjunction with an ac induction motor is a viable alternative to present dc vehicle propulsion systems on the basis of performance and size criteria.

High voltage DC switchgear development for multi-kW space power system: Aerospace technology development of three types of solid state power controllers for 200-1100VDC with current ratings of 25, 50, and 80 amperes with one type utilizing an electromechanical device

NASA Technical Reports Server (NTRS)

Billings, W. W.

1981-01-01

Three types of solid state power controllers (SSPC's) for high voltage, high power DC system applications were developed. The first type utilizes a SCR power switch. The second type employes an electromechanical power switch element with solid state commutation. The third type utilizes a transistor power switch. Significant accomplishments include high operating efficiencies, fault clearing, high/low temperature performance and vacuum operation.

Dovetail Rotor Construction For Permanent-Magnet Motors

NASA Technical Reports Server (NTRS)

Kintz, Lawrence J., Jr.; Puskas, William J.

1988-01-01

New way of mounting magnets in permanent-magnet, electronically commutated, brushless dc motors. Magnets wedge shaped, tapering toward center of rotor. Oppositely tapered pole pieces, electron-beam welded to rotor hub, retain magnets against centrifugal force generated by spinning rotor. To avoid excessively long electron-beam welds, pole pieces assembled in segments rather than single long bars.

Market Signals: Evidence on the Determinants and Consequences of School Choice from a Citywide Lottery

ERIC Educational Resources Information Center

Glazerman, Steven; Dotter, Dallas

2017-01-01

We estimate school-choice preferences revealed by the rank-ordered lists submitted by more than 22,000 applicants to a citywide lottery for more than 200 traditional and charter public schools in Washington, D.C. The results confirm previously reported findings that commuting distance, school demographics, and academic indicators play important…

Control of a lithium-ion battery storage system for microgrid applications

NASA Astrophysics Data System (ADS)

Pegueroles-Queralt, Jordi; Bianchi, Fernando D.; Gomis-Bellmunt, Oriol

2014-12-01

The operation of future microgrids will require the use of energy storage systems employing power electronics converters with advanced power management capacities. This paper presents the control scheme for a medium power lithium-ion battery bidirectional DC/AC power converter intended for microgrid applications. The switching devices of a bidirectional DC converter are commanded by a single sliding mode control law, dynamically shaped by a linear voltage regulator in accordance with the battery management system. The sliding mode controller facilitates the implementation and design of the control law and simplifies the stability analysis over the entire operating range. Control parameters of the linear regulator are designed to minimize the impact of commutation noise in the DC-link voltage regulation. The effectiveness of the proposed control strategy is illustrated by experimental results.

Halbach array generator/motor having an automatically regulated output voltage and mechanical power output

DOEpatents

Post, Richard F.

2005-02-22

A motor/generator having its stationary portion, i.e., the stator, positioned concentrically within its rotatable element, i.e., the rotor, along its axis of rotation. The rotor includes a Halbach array. The stator windings are switched or commutated to provide a DC motor/generator much the same as in a conventional DC motor/generator. The voltage and power are automatically regulated by using centrifugal force to change the diameter of the rotor, and thereby vary the radial gap in between the stator and the rotating Halbach array, as a function of the angular velocity of the rotor.

Direct current ballast circuit for metal halide lamp

NASA Technical Reports Server (NTRS)

Lutus, P. (Inventor)

1981-01-01

A direct current ballast circuit for a two electrode metal halide lamp is described. Said direct current ballast circuit includes a low voltage DC input and a high frequency power amplifier and power transformer for developing a high voltage output. The output voltage is rectified by diodes and filtered by inductor and capacitor to provide a regulated DC output through commutating diodes to one terminal of the lamp at the output terminal. A feedback path from the output of the filter capacitor through the bias resistor to power the high frequency circuit which includes the power amplifier and the power transformer for sustaining circuit operations during low voltage transients on the input DC supply is described. A current sensor connected to the output of the lamp through terminal for stabilizing lamp current following breakdown of the lamp is described.

Controlling a Four-Quadrant Brushless Three-Phase dc Motor

NASA Technical Reports Server (NTRS)

Nola, F. J.

1986-01-01

Control circuit commutates windings of brushless, three-phase, permanent-magnet motor operating from power supply. With single analog command voltage, controller makes motor accelerate, drive steadily, or brake regeneratively, in clockwise or counterclockwise direction. Controller well suited for use with energy-storage flywheels, actuators for aircraft-control surfaces, cranes, industrial robots, and other electromechanical systems requiring bidirectional control or sudden stopping and reversal.

Torque-Summing Brushless Motor

NASA Technical Reports Server (NTRS)

Vaidya, J. G.

1986-01-01

Torque channels function cooperatively but electrically independent for reliability. Brushless, electronically-commutated dc motor sums electromagnetic torques on four channels and applies them to single shaft. Motor operates with any combination of channels and continues if one or more of channels fail electrically. Motor employs single stator and rotor and mechanically simple; however, each of channels electrically isolated from other so that failure of one does not adversely affect others.

An Improved Power Quality BIBRED Converter-Based VSI-Fed BLDC Motor Drive

NASA Astrophysics Data System (ADS)

Singh, Bhim; Bist, Vashist

2014-01-01

This paper presents an IHQRR (integrated high-quality rectifier regulator) BIBRED (boost integrated buck rectifier energy storage DC-DC) converter-based VSI (voltage source inverter)-fed BLDC (brushless DC) motor drive. The speed control of BLDC motor is achieved by controlling the DC link voltage of the VSI using a single voltage sensor. This allows VSI to operate in fundamental frequency switching mode for electronic commutation of BLDC motor which reduces the switching losses due to high-frequency switching used in conventional approach of PWM (pulse width modulation)-based VSI-fed BLDC motor drive. A BIBRED converter is operated in a dual-DCM (discontinuous conduction mode) thus using a voltage follower approach for PFC (power factor correction) and DC link voltage control. The performance of the proposed drive is evaluated for improved power quality over a wide range of speed control and supply voltage variation for demonstrating the behavior of proposed drive. The power quality indices thus obtained are within the recommended limits by international PQ (power quality) standards such as IEC 61000-3-2.

"Long life" DC brush motor for use on the Mars surveyor program

NASA Technical Reports Server (NTRS)

Braun, David; Noon, Don

1998-01-01

DC brush motors have several qualities which make them very attractive for space flight applications. Their mechanical commutation is simple and lightweight, requiring no external sensing and control in order to function properly. They are extremely efficient in converting electrical energy into mechanical energy. Efficiencies over 80% are not uncommon, resulting in high power throughput to weight ratios. However, the inherent unreliability and short life of sliding electrical contacts, especially in vacuum, have driven previous programs to utilize complex brushless DC or the less efficient stepper motors. The Mars Surveyor Program (MSP'98) and the Shuttle Radar Topography Mission (SRTM) have developed a reliable "long life" brush type DC motor for operation in low temperature, low pressure CO2 and N2, utilizing silver-graphite brushes. The original intent was to utilize this same motor for SRTM's space operation, but the results thus far have been unsatisfactory in vacuum. This paper describes the design, test, and results of this development.

Effects of pole flux distribution in a homopolar linear synchronous machine

NASA Astrophysics Data System (ADS)

Balchin, M. J.; Eastham, J. F.; Coles, P. C.

1994-05-01

Linear forms of synchronous electrical machine are at present being considered as the propulsion means in high-speed, magnetically levitated (Maglev) ground transportation systems. A homopolar form of machine is considered in which the primary member, which carries both ac and dc windings, is supported on the vehicle. Test results and theoretical predictions are presented for a design of machine intended for driving a 100 passenger vehicle at a top speed of 400 km/h. The layout of the dc magnetic circuit is examined to locate the best position for the dc winding from the point of view of minimum core weight. Measurements of flux build-up under the machine at different operating speeds are given for two types of secondary pole: solid and laminated. The solid pole results, which are confirmed theoretically, show that this form of construction is impractical for high-speed drives. Measured motoring characteristics are presented for a short length of machine which simulates conditions at the leading and trailing ends of the full-sized machine. Combination of the results with those from a cylindrical version of the machine make it possible to infer the performance of the full-sized traction machine. This gives 0.8 pf and 0.9 efficiency at 300 km/h, which is much better than the reported performance of a comparable linear induction motor (0.52 pf and 0.82 efficiency). It is therefore concluded that in any projected high-speed Maglev systems, a linear synchronous machine should be the first choice as the propulsion means.

Energy storage apparatus

NASA Technical Reports Server (NTRS)

Studer, P. A.; Evans, H. E. (Inventor)

1978-01-01

A high efficiency, flywheel type energy storage device which comprises an electronically commutated d.c. motor/generator unit having a massive flywheel rotor magnetically suspended around a ring shaped stator is presented. During periods of low energy demand, the storage devices were operated as a motor, and the flywheel motor was brought up to operating speed. Energy was drawn from the device functioning as a generator as the flywheel rotor rotated during high energy demand periods.

Silicon controlled rectifier polyphase bridge inverter commutated with gate-turn-off thyristor

NASA Technical Reports Server (NTRS)

Edwards, Dean B. (Inventor); Rippel, Wally E. (Inventor)

1986-01-01

A polyphase SCR inverter (10) having N switching poles, each comprised of two SCR switches (1A, 1B; 2A, 2B . . . NA, NB) and two diodes (D1B; D1B; D2A, D2B . . . DNA, DNB) in series opposition with saturable reactors (L1A, L1B; L2A, L2B . . . LNA, LNB) connecting the junctions between the SCR switches and diodes to an output terminal (1, 2 . . . 3) is commutated with only one GTO thyristor (16) connected between the common negative terminal of a dc source and a tap of a series inductor (14) connected to the positive terminal of the dc source. A clamp winding (22) and diode (24) are provided, as is a snubber (18) which may have its capacitance (c) sized for maximum load current divided into a plurality of capacitors (C.sub.1, C.sub.2 . . . C.sub.N), each in series with an SCR switch S.sub.1, S.sub.2 . . . S.sub.N). The total capacitance may be selected by activating selected switches as a function of load current. A resistor 28 and SCR switch 26 shunt reverse current when the load acts as a generator, such as a motor while braking.

CSMP (Continuous System Modeling Program) modeling of brushless DC motors

NASA Astrophysics Data System (ADS)

Thomas, S. M.

1984-09-01

Recent improvements in rare earth magnets have made it possible to construct strong, lightweight, high horsepower DC motors. This has occasioned a reassessment of electromechanical actuators as alternatives to comparable pneumatic and hydraulic systems for use in flight control actuators for tactical missiles. This thesis develops a low-order mathematical model for the simulation and analysis of brushless DC motor performance. This model is implemented in CSMP language. It is used to predict such motor performance curves as speed, current and power versus torque. Electronic commutation based on Hall effect sensor positional feedback is simulated. Steady state motor behavior is studied under both constant and variable air gap flux conditions. The variable flux takes two different forms. In the first case, the flux is varied as a simple sinusoid. In the second case, the flux is varied as the sum of a sinusoid and one of its harmonics.

Brush potential curve tracer

DOEpatents

Finch, H.A.

1985-06-21

A device for analyzing commutating characteristics of a motor or generator includes a holder for supporting a plurality of probes adjacent a brush of the motor or generator. Measurements of electrical current characteristics of the probes provides information useful in analyzing operation of the machine. Methods for employing a device in accordance with the invention are also disclosed.

The Commuting Student Study, Report IV: Food Facilities.

ERIC Educational Resources Information Center

Williamson, W. J.; And Others

This report presents a detailed analysis of the food facilities at the University of Alberta. Emphasis is placed on the three main supplies of food: the peak production of cafeterias at meal times, the snack facilities, and vending machines. Study results indicate: (1) extensive use of the students' union building cafeterias; (2) reported use of…

Development of a drive system for a sequential space camera

NASA Technical Reports Server (NTRS)

Sharpsteen, J. T.; Solheim, C. D.; Stoap, L. J.

1976-01-01

Breadboard models of single and dual motor drives for the shutter, claw and magazine of a space camera system were designed and tested. The single motor technique utilizes a single electronically commutated motor to drive the claw and shutter without resorting to a solenoid actuated clutch for pulse operation. Shutter speed is established by a combination of the cinemode speed and the opening of the conventional DAC two piece shutter. Pulse mode operation is obtained by applying power at a fixed clock rate and removing power at an appropriate point in the mechanical cycle such that the motor comes to rest by system friction. The dual motor approach utilizes a stepper motor to drive the shutter and an electronically commutated dc motor to drive the claw and magazine functions. The motors are synchronized electronically.

Design comparison of single phase outer and inner-rotor hybrid excitation flux switching motor for hybrid electric vehicles

NASA Astrophysics Data System (ADS)

Mazlan, Mohamed Mubin Aizat; Sulaiman, Erwan; Husin, Zhafir Aizat; Othman, Syed Muhammad Naufal Syed; Khan, Faisal

2015-05-01

In hybrid excitation machines (HEMs), there are two main flux sources which are permanent magnet (PM) and field excitation coil (FEC). These HEMs have better features when compared with the interior permanent magnet synchronous machines (IPMSM) used in conventional hybrid electric vehicles (HEVs). Since all flux sources including PM, FEC and armature coils are located on the stator core, the rotor becomes a single piece structure similar with switch reluctance machine (SRM). The combined flux generated by PM and FEC established more excitation fluxes that are required to produce much higher torque of the motor. In addition, variable DC FEC can control the flux capabilities of the motor, thus the machine can be applied for high-speed motor drive system. In this paper, the comparisons of single-phase 8S-4P outer and inner rotor hybrid excitation flux switching machine (HEFSM) are presented. Initially, design procedures of the HEFSM including parts drawing, materials and conditions setting, and properties setting are explained. Flux comparisons analysis is performed to investigate the flux capabilities at various current densities. Then the flux linkages of PM with DC FEC of various DC FEC current densities are examined. Finally torque performances are analyzed at various armature and FEC current densities for both designs. As a result, the outer-rotor HEFSM has higher flux linkage of PM with DC FEC and higher average torque of approximately 10% when compared with inner-rotor HEFSM.

Improved Transient and Steady-State Performances of Series Resonant ZCS High-Frequency Inverter-Coupled Voltage Multiplier Converter with Dual Mode PFM Control Scheme

NASA Astrophysics Data System (ADS)

Chu, Enhui; Gamage, Laknath; Ishitobi, Manabu; Hiraki, Eiji; Nakaoka, Mutsuo

The A variety of switched-mode high voltage DC power supplies using voltage-fed type or current-fed type high-frequency transformer resonant inverters using MOS gate bipolar power transistors; IGBTs have been recently developed so far for a medical-use X-ray high power generator. In general, the high voltage high power X-ray generator using voltage-fed high frequency inverter with a high voltage transformer link has to meet some performances such as (i) short rising period in start transient of X-ray tube voltage (ii) no overshoot transient response in tube voltage, (iii) minimized voltage ripple in periodic steady-state under extremely wide load variations and filament heater current fluctuation conditions of the X-ray tube. This paper presents two lossless inductor snubber-assisted series resonant zero current soft switching high-frequency inverter using a diode-capacitor ladder type voltage multiplier called Cockcroft-Walton circuit, which is effectively implemented for a high DC voltage X-ray power generator. This DC high voltage generator which incorporates pulse frequency modulated series resonant inverter using IGBT power module packages is based on the operation principle of zero current soft switching commutation scheme under discontinuous resonant current and continuous resonant current transition modes. This series capacitor compensated for transformer resonant power converter with a high frequency transformer linked voltage boost multiplier can efficiently work a novel selectively-changed dual mode PFM control scheme in order to improve the start transient and steady-state response characteristics and can completely achieve stable zero current soft switching commutation tube filament current dependent for wide load parameter setting values with the aid of two lossless inductor snubbers. It is proved on the basis of simulation and experimental results in which a simple and low cost control implementation based on selectively-changed dual-mode PFM for high-voltage X-ray DC-DC power converter with a voltage multiplier strategy has some specified voltage pattern tracking voltage response performances under rapid rising time and no overshoot in start transient tube voltage as well as the minimized steady-state voltage ripple in tube voltage.

Rapid Assemblers for Voxel-Based VLSI Robotics

DTIC Science & Technology

2014-02-12

relied on coin- cell batteries with high energy density, but low power density. Each of the actuators presented requires relatively high power...The device consists of a low power DC- DC low to high voltage converter operated by 4A cell batteries and an assembler, which is a grid of electrodes...design, simulate and fabricate complex 3D machines, as well as to repair, adapt and recycle existing machines, and to perform rigorous design

78 FR 28577 - Notification of Proposed Production Activity: Whirlpool Corporation Subzone 8I; (Washing Machines...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-15

...; refrigeration parts; dishwashing machine parts; drying machine parts; water inlet valves; AC/DC fan motors; AC... harnesses of copper; turbidity sensors; and, sensor--spray arms (duty rate ranges from duty- free to 6.5...

Brush potential curve tracer

DOEpatents

Finch, Hilvan A.

1987-01-01

A device for analyzing commutating characteristics of a motor or generator includes a holder for supporting a plurality of probes adjacent a brush of the motor or generator. Measurements of electrical current characteristics in each of the probes provides information useful in analyzing operation of the machine. Methods for employing a device in accordance with the invention are also disclosed.

Results of the harmonics measurement program at the John F. Long photovoltaic house

NASA Astrophysics Data System (ADS)

Campen, G. L.

1982-03-01

Photovoltaic (PV) systems used in single-family dwellings require an inverter to act as an interface between the direct-current (dc) power output of the PV unit and the alternating-current (ac) power needed by house loads. A type of inverter known as line commutated injects harmonic currents on the ac side and requires large amounts of reactive power. Large numbers of such PV installations could lead to unacceptable levels of harmonic voltages on the utility system, and the need to increase the utility's deliver of reactive power could result in significant cost increases. The harmonics and power-factor effects are examined for a single PV installation using a line-commutated inverter. The magnitude and phase of various currents and voltages from the fundamental to the 13th harmonic were recorded both with and without the operation of the PV system.

AC Loss Analysis of MgB2-Based Fully Superconducting Machines

NASA Astrophysics Data System (ADS)

Feddersen, M.; Haran, K. S.; Berg, F.

2017-12-01

Superconducting electric machines have shown potential for significant increase in power density, making them attractive for size and weight sensitive applications such as offshore wind generation, marine propulsion, and hybrid-electric aircraft propulsion. Superconductors exhibit no loss under dc conditions, though ac current and field produce considerable losses due to hysteresis, eddy currents, and coupling mechanisms. For this reason, many present machines are designed to be partially superconducting, meaning that the dc field components are superconducting while the ac armature coils are conventional conductors. Fully superconducting designs can provide increases in power density with significantly higher armature current; however, a good estimate of ac losses is required to determine the feasibility under the machines intended operating conditions. This paper aims to characterize the expected losses in a fully superconducting machine targeted towards aircraft, based on an actively-shielded, partially superconducting machine from prior work. Various factors are examined such as magnet strength, operating frequency, and machine load to produce a model for the loss in the superconducting components of the machine. This model is then used to optimize the design of the machine for minimal ac loss while maximizing power density. Important observations from the study are discussed.

76 FR 27668 - ASC Machine Tools, Inc., Spokane Valley, WA; Notice of Negative Determination on Reconsideration

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-12

... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-72,971] ASC Machine Tools, Inc... workers and former workers of ASC Machine Tools, Inc., Spokane Valley, Washington (the subject firm). The... workers of ASC Machine Tools, Inc., Spokane Valley, Washington. Signed in Washington, DC, on this 2nd day...

Adaptive vibration control using synchronous demodulation with machine tool controller motor commutation

DOEpatents

Hopkins, David James [Livermore, CA

2008-05-13

A control system and method for actively reducing vibration in a spindle housing caused by unbalance forces on a rotating spindle, by measuring the force-induced spindle-housing motion, determining control signals based on synchronous demodulation, and provide compensation for the measured displacement to cancel or otherwise reduce or attenuate the vibration. In particular, the synchronous demodulation technique is performed to recover a measured spindle housing displacement signal related only to the rotation of a machine tool spindle, and consequently rejects measured displacement not related to spindle motion or synchronous to a cycle of revolution. Furthermore, the controller actuates at least one voice-coil (VC) motor, to cancel the original force-induced motion, and adapts the magnitude of voice coil signal until this measured displacement signal is brought to a null. In order to adjust the signal to a null, it must have the correct phase relative to the spindle angle. The feedback phase signal is used to adjust a common (to both outputs) commutation offset register (offset relative to spindle encoder angle) to force the feedback phase signal output to a null. Once both of these feedback signals are null, the system is compensating properly for the spindle-induced motion.

Electrical machines with superconducting windings. Part 3: Homopolar dc machines

NASA Astrophysics Data System (ADS)

Kullman, D.; Henninger, P.

1981-01-01

The losses in rotating liquid metal contacts and the problems in including liquid metals were theoretically and experimentally studied. These machines are shown realiable. For electric ship propulsion, they are a more efficient method of power transmission than mechanical gearboxes. However, weight reduction as compared to mechanical gearboxes can hardly be achieved with machines fully shielded by magnetic iron.

Power-Quality Improvement in PFC Bridgeless SEPIC-Fed BLDC Motor Drive

NASA Astrophysics Data System (ADS)

Singh, Bhim; Bist, Vashist

2013-06-01

This article presents a design of a power factor correction (PFC)-based brushless DC (BLDC) motor drive. The speed control of BLDC motor is achieved by controlling the DC link voltage of the voltage source inverter (VSI) feeding BLDC motor using a single voltage sensor. A front-end bridgeless single-ended primary inductance converter (SEPIC) is used for DC link voltage control and PFC operation. A bridgeless SEPIC is designed to operate in discontinuous inductor current mode (DICM) thus utilizing a simple control scheme of voltage follower. An electronic commutation of BLDC motor is used for VSI to operate in a low-frequency operation for reduced switching losses in the VSI. Moreover, a bridgeless topology offers less conduction losses due to absence of diode bridge rectifier for further increasing the efficiency. The proposed BLDC motor drive is designed to operate over a wide range of speed control with an improved power-quality at the AC mains under the recommended international power-quality standards such as IEC 61000-3-2.

Comments, with reply, on 'Parallel resonant converter with LLC-type commutation' by C. Q. Lee et al.

NASA Astrophysics Data System (ADS)

Hamill, David C.

1991-05-01

In a recent paper by Lee et al. (1989), the authors analyzed a DC-DC converter that they termed the LLC-type PRC (parallel resonant converter). Its resonant network contains three active components-two inductances and a parallel capacitance -and as a consequence the the converter might be expected to have third-order dynamics. But Lee et al. employed a matrix transformation to show that the behavior of the circuit may be represented as a state-plane trajectory, as for a second-order circuit. The purpose of this contribution is to show that the converter has a zero-frequency eigenvalue, associated with undesirable circulating DC. The second-order dynamics exhibited by the third-order converter are explained by an application of Thevenin's theorem. Some aerospace applications of the LLC-type parallel resonant converter (PRC) are discussed. In their reply, the authors show that the circulating direct current does not exist in the practical converter circuit.

An Improved Power Quality Based Sheppard-Taylor Converter Fed BLDC Motor Drive

NASA Astrophysics Data System (ADS)

Singh, Bhim; Bist, Vashist

2015-12-01

This paper deals with the design and analysis of a power factor correction based Sheppard-Taylor converter fed brushless dc motor (BLDCM) drive. The speed of the BLDCM is controlled by adjusting the dc link voltage of the voltage source inverter (VSI) feeding BLDCM. Moreover, a low frequency switching of the VSI is used for electronically commutating the BLDCM for reduced switching losses. The Sheppard-Taylor converter is designed to operate in continuous conduction mode to achieve an improved power quality at the ac mains for a wide range of speed control and supply voltage variation. The BLDCM drive is designed and its performance is simulated in a MATLAB/Simulink environment to achieve the power quality indices within the limits of the international power quality standard IEC-61000-3-2.

Hybrid inverter for HVDC/weak AC system interconnection

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tam, K.S.

1985-01-01

The concept of the hybrid converter is introduced. By independently controlling a naturally commutated converter (NCC) and an artificially commutated converter (ACC), real power and reactive power can be controlled independently. Alternatively, the ac bus voltage can be regulated without affecting the real power transfer. Independent control is feasible only within certain operating boundaries. Twelve pulse operation, sequential control, and complementary circuits may be viewed as variations of the hybrid converter. The concept of the hybrid converter is demonstrated by digital simulation. At the current state of technology, the NCC is best implemented by a 6-pulse bridge using thyristors asmore » the switching elements. A survey of power electronics applicable to HVDC applications reveals that the capacitively commutated current-sourced converters are either technically or economically better than the other alternatives for the implementation of the ACC. The digital simulation results show that the problems of operating an HVDC system into a weak ac system can be solved by using a hybrid inverter. A new control scheme, the zero Q control, is developed. With no reactive power interaction between the dc system and the ac system, the stability of the HVDC/weak ac system operation is significantly improved. System start-up and fault recovery is fast and stable.« less

Integral inverter/battery charger for use in electric vehicles

NASA Technical Reports Server (NTRS)

Thimmesch, D.

1983-01-01

The design and test results of a thyristor based inverter/charger are discussed. A battery charger is included integral to the inverter by using a subset of the inverter power circuit components. The resulting charger provides electrical isolation between the vehicle propulsion battery and ac line and is capable of charging a 25 kWh propulsion battery in 8 hours from a 220 volt ac line. The integral charger employs the inverter commutation components at a resonant ac/dc isolated converter rated at 3.6 kW. Charger efficiency and power factor at an output power of 3.6 kW are 86% and 95% respectively. The inverter, when operated with a matching polyphase ac induction motor and nominal 132 volt propulsion battery, can provide a peak shaft power of 34 kW (45 ph) during motoring operation and 45 kW (60 hp) during regeneration. Thyristors are employed for the inverter power switching devices and are arranged in an input-commutated topology. This configuration requires only two thyristors to commutate the six main inverter thyristors. Inverter efficiency during motoring operation at motor shaft speeds above 450 rad/sec (4300 rpm) is 92-94% for output power levels above 11 KW (15 hp). The combined ac inverter/charger package weighs 47 kg (103 lbs).

Composite Ceramic Superconducting Wires for Electric Motor Applications

DTIC Science & Technology

1988-12-30

current a-yi t6-ransition. - Emerson Motor Division has begun work on DC heteropolar and homopolar motor designs. The mechanical stresses on conventional...Emerson Motor Division has begun work on DC heteropolar motor designs and, through Professor Novotny at U. Wisconsin, DC homopolar machines. The...123 3.2 Literature Research .............................. .. 124 3 3.3 Application Study .............................. .. 124 3.3.1 Homopolar Motor

Analytical modeling of the dynamics of brushless dc motors for aerospace applications: A conceptual framework

NASA Technical Reports Server (NTRS)

Demerdash, N. A. O.

1976-01-01

The modes of operation of the brushless d.c. machine and its corresponding characteristics (current flow, torque-position, etc.) are presented. The foundations and basic principles on which the preliminary numerical model is based, are discussed.

BEAM DYNAMICS SIMULATIONS FOR A DC GUN BASED INJECTOR FOR PERL.

DOE Office of Scientific and Technical Information (OSTI.GOV)

ZHOU,F.; BEN-ZVI,I.; WANG,X.J.

2001-06-18

The National Synchrotron Light Source (NSLS) at Brookhaven National Laboratory (BNL) is considering an upgrade based on the Photoinjected Energy Recovering Linac (PERL). The various injector schemes for this machine are being extensively investigated at BNL. One of the possible options is photocathode DC gun. The schematic layout of a PERL DC gun based injector and its preliminary beam dynamics are presented in this paper. The transverse and longitudinal emittance of photo-electron beam were optimized for a DC field 500 kV.

Effective switching frequency multiplier inverter

DOEpatents

Su, Gui-Jia [Oak Ridge, TN; Peng, Fang Z [Okemos, MI

2007-08-07

A switching frequency multiplier inverter for low inductance machines that uses parallel connection of switches and each switch is independently controlled according to a pulse width modulation scheme. The effective switching frequency is multiplied by the number of switches connected in parallel while each individual switch operates within its limit of switching frequency. This technique can also be used for other power converters such as DC/DC, AC/DC converters.

Back-and-forth micromotion of aqueous droplets in a dc electric field.

PubMed

Kurimura, Tomo; Ichikawa, Masatoshi; Takinoue, Masahiro; Yoshikawa, Kenichi

2013-10-01

Recently, it was reported that an aqueous droplet in an oil phase exhibited rhythmic back-and-forth motion under stationary dc voltage on the order of 100 V. Here, we demonstrate that the threshold voltage for inducing such oscillation is successfully decreased to the order of 10 V through downsizing of the experimental system. Notably, the threshold electric field tends to decrease with a nonlinear scaling relationship accompanied by the downsizing. We derive a simple theoretical model to interpret the system size dependence of the threshold voltage. This model equation suggests the unique effect of additional noise, which is qualitatively characterized as a coherent resonance by an actual experiment as a kind of coherent resonance. Our result would provide insight into the construction of micrometer-sized self-commutating motors and actuators in microfluidic and micromechanical devices.

A simple approach to detect and correct signal faults of Hall position sensors for brushless DC motors at steady speed

NASA Astrophysics Data System (ADS)

Shi, Yongli; Wu, Zhong; Zhi, Kangyi; Xiong, Jun

2018-03-01

In order to realize reliable commutation of brushless DC motors (BLDCMs), a simple approach is proposed to detect and correct signal faults of Hall position sensors in this paper. First, the time instant of the next jumping edge for Hall signals is predicted by using prior information of pulse intervals in the last electrical period. Considering the possible errors between the predicted instant and the real one, a confidence interval is set by using the predicted value and a suitable tolerance for the next pulse edge. According to the relationship between the real pulse edge and the confidence interval, Hall signals can be judged and the signal faults can be corrected. Experimental results of a BLDCM at steady speed demonstrate the effectiveness of the approach.

Experimental prototype of an electric elevator

NASA Astrophysics Data System (ADS)

Gaiceanu, M.; Epure, S.; Ciuta, S.

2016-08-01

The main objective is to achieve an elevator prototype powered by a three-phase voltage system via a bidirectional static power converter ac-ac with regenerating capability. In order to diminish the power size of the electric motor up to 1/3 of rated power, the elevator contains two carriages of the same weight, one serving as the payload, and the other as counterweight. Before proper operation of the static power converter, the capacitor must be charged at rated voltage via a precharge circuit. At the moment of stabilizing the DC voltage at nominal value, the AC-AC power converter can operates in the proper limits. The functions of the control structure are: the load control task, speed and torque controls. System includes transducers for current measuring, voltage sensors and encoder. As reserve power sources the hybrid battery-photovoltaic panels are used. The control voltage is modulated by implementing four types of pulse width modulations: sinusoidal, with reduced commutation, third order harmonic insertion, and the space vector modulation. Therefore, the prototype could operates with an increased efficiency, in spite of the existing ones. The experimental results confirm the well design of the chosen solution. The control solution assures bidirectional power flow control, precharge control, and load control and it is implemented on a digital signal processor. The elevator capacity is between 300-450 kg, and it is driven by using a 1.5 kW three-phase asynchronous machine.

Exact analytical modeling of magnetic vector potential in surface inset permanent magnet DC machines considering magnet segmentation

NASA Astrophysics Data System (ADS)

Jabbari, Ali

2018-01-01

Surface inset permanent magnet DC machine can be used as an alternative in automation systems due to their high efficiency and robustness. Magnet segmentation is a common technique in order to mitigate pulsating torque components in permanent magnet machines. An accurate computation of air-gap magnetic field distribution is necessary in order to calculate machine performance. An exact analytical method for magnetic vector potential calculation in surface inset permanent magnet machines considering magnet segmentation has been proposed in this paper. The analytical method is based on the resolution of Laplace and Poisson equations as well as Maxwell equation in polar coordinate by using sub-domain method. One of the main contributions of the paper is to derive an expression for the magnetic vector potential in the segmented PM region by using hyperbolic functions. The developed method is applied on the performance computation of two prototype surface inset magnet segmented motors with open circuit and on load conditions. The results of these models are validated through FEM method.

Automatic marker for photographic film

NASA Technical Reports Server (NTRS)

Gabbard, N. M.; Surrency, W. M.

1974-01-01

Commercially-produced wire-marking machine is modified to title or mark film rolls automatically. Machine is used with film drive mechanism which is powered with variable-speed, 28-volt dc motor. Up to 40 frames per minute can be marked, reducing time and cost of process.

Control system of mutually coupled switched reluctance motor drive of mining machines in generator mode

NASA Astrophysics Data System (ADS)

Ivanov, A. S.; Kalanchin, I. Yu; Pugacheva, E. E.

2017-09-01

One of the first electric motors, based on the use of electromagnets, was a reluctance motor in the XIX century. Due to the complexities in the implementation of control system the development of switched reluctance electric machines was repeatedly initiated only in 1960 thanks to the development of computers and power electronic devices. The main feature of these machines is the capacity to work both in engine mode and in generator mode. Thanks to a simple and reliable design in which there is no winding of the rotor, commutator, permanent magnets, a reactive gate-inductor electric drive operating in the engine mode is actively being introduced into various areas such as car industry, production of household appliances, wind power engineering, as well as responsible production processes in the oil and mining industries. However, the existing shortcomings of switched reluctance electric machines, such as nonlinear pulsations of electromagnetic moment, the presence of three or four phase supply system and sensor of rotor position prevent wide distribution of this kind of electric machines.

17 CFR 200.80 - Commission records and information.

Code of Federal Regulations, 2010 CFR

2010-04-01

... Commission's contract copying service at fees found in appendix E to this section. (5) Records available with..., NE., Washington, DC. Copying machines, which are available to requestors on a self-service or... that are available for inspection in the Washington, DC Headquarters. Fees and levels of service are...

17 CFR 200.80 - Commission records and information.

Code of Federal Regulations, 2011 CFR

2011-04-01

... Commission's contract copying service at fees found in appendix E to this section. (5) Records available with..., NE., Washington, DC. Copying machines, which are available to requestors on a self-service or... that are available for inspection in the Washington, DC Headquarters. Fees and levels of service are...

Investigation of the residue in an electric rail gun employing a plasma armature

NASA Technical Reports Server (NTRS)

Bauer, D. P.; Barber, J. P.

1984-01-01

The performance of dc electric rail guns using plasma-armature-accelerated projectiles was studied. It was found that the initial rail launcher acceleration profile was consistent with the simulation, but that after the projectile had traveled approximately 25 to 30 cm along the gun, a considerable portion of the current in the projectile armature commutated into a secondary current path. Also noted were the lower than expected muzzle velocities. It was proposed that the secondary current path was a relatively high conductivity layer of residue on the launcher bore.

Design, building and test of one prototype and four final position sensor assemblies: Hall effect position sensors

NASA Technical Reports Server (NTRS)

1976-01-01

This report covers the development of a three channel Hall effect position sensing system for the commutation of a three phase dc torquer motor. The effort consisted of the evaluation, modification and re-packaging of a commercial position sensor and the design of a target configuration unique to this application. The resulting design meets the contract requirements and, furthermore, the test results indicate not only the practicality and versatility of the design, but also that there may be higher limits of resolution and accuracy achievable.

Fabricating and using a micromachined magnetostatic relay or switch

NASA Technical Reports Server (NTRS)

Tai, Yu-Chong (Inventor); Wright, John A. (Inventor)

2001-01-01

A micromachined magnetostatic relay or switch includes a springing beam on which a magnetic actuation plate is formed. The springing beam also includes an electrically conductive contact. In the presence of a magnetic field, the magnetic material causes the springing beam to bend, moving the electrically conductive contact either toward or away from another contact, and thus creating either an electrical short-circuit or an electrical open-circuit. The switch is fabricated from silicon substrates and is particularly useful in forming a MEMs commutation and control circuit for a miniaturized DC motor.

Ultra-Compact Motor Controller

NASA Technical Reports Server (NTRS)

Townsend, William T.; Cromwell, Adam; Hauptman, Traveler; Pratt, Gill Andrews

2012-01-01

This invention is an electronically commutated brushless motor contro ller that incorporates Hall-array sensing in a small, 42-gram packag e that provides 4096 absolute counts per motor revolution position s ensing. The unit is the size of a miniature hockey puck, and is a 44 -pin male connector that provides many I/O channels, including CANbus , RS-232 communications, general-purpose analog and digital I/O (GPI O), analog and digital Hall inputs, DC power input (18-90 VDC, 0-l0 A), three-phase motor outputs, and a strain gauge amplifier.

ENVIRONMENTALLY CONSCIOUS ELECTROCHEMICAL MACHINING FOR ZERO DISCHARGE AND METAL RECYCLING - PHASE I

EPA Science Inventory

Determination of efficiencies, loss mechanisms, and performance degradation factors in chopper controlled dc vehical motors. Section 2: The time dependent finite element modeling of the electromagnetic field in electrical machines: Methods and applications. Ph.D. Thesis

NASA Technical Reports Server (NTRS)

Hamilton, H. B.; Strangas, E.

1980-01-01

The time dependent solution of the magnetic field is introduced as a method for accounting for the variation, in time, of the machine parameters in predicting and analyzing the performance of the electrical machines. The method of time dependent finite element was used in combination with an also time dependent construction of a grid for the air gap region. The Maxwell stress tensor was used to calculate the airgap torque from the magnetic vector potential distribution. Incremental inductances were defined and calculated as functions of time, depending on eddy currents and saturation. The currents in all the machine circuits were calculated in the time domain based on these inductances, which were continuously updated. The method was applied to a chopper controlled DC series motor used for electric vehicle drive, and to a salient pole sychronous motor with damper bars. Simulation results were compared to experimentally obtained ones.

Direct current hybrid breakers: A design and its realization

NASA Astrophysics Data System (ADS)

Atmadji, Ali Mahfudz Surya

2000-12-01

The use of semiconductors for electric power circuit breakers instead of conventional breakers remains a utopia when designing fault current interrupters for high power networks. The major problems concerning power semiconductor circuit breakers are the excessive heat losses and their sensitivity to transients. However, conventional breakers are capable of dealing with such matters. A combination of the two methods, or so-called `hybrid breakers', would appear to be a solution; however, hybrid breakers use separate parallel branches for conducting the main current and interrupting the short-circuit current. Such breakers are intended for protecting direct current (DC) traction systems. In this thesis hybrid switching techniques for current limitation and purely solidstate current interruption are investigated for DC breakers. This work analyzes the transient behavior of hybrid breakers and compares their operations with conventional breakers and similar solid-state devices in DC systems. Therefore a hybrid breaker was constructed and tested in a specially designed high power test circuit. A vacuum breaker was chosen as the main breaker in the main conducting path; then a commutation path was connected across the vacuum breaker where it provided current limitation and interruption. The commutation path operated only during any current interruption and the process required additional circuits. These included a certain energy storage, overvoltage suppressor and commutation switch. So that when discharging this energy, a controlled counter-current injection could be produced. That counter-current opposed the main current in the breaker by superposition in order to create a forced current-zero. One-stage and two-stage commutation circuits have been treated extensively. This study project contains both theoretical and experimental investigations. A direct current shortcircuit source was constructed capable of delivering power equivalent to a fault. It supplied a direct voltage of 1kVDC which was rectified having been obtained from a 3-phase lOkV/380V supply. The source was successfully tested to deliver a fault current of 7kA with a time constant of 5ms. The hybrid breaker that was developed could provide protection for 750VDC traction systems. The breaker was equipped with a fault- recognizing circuit based on a current level triggering. An electronic circuit was built for this need and was included in the system. It monitored the system continuously and took action by generating trip signals when a fault was recognized. Interruption was followed by a suitable timing of the fast contact separation in the main breaker and the current-zero creation. An electrodynamically driven mechanism was successfully tested having a dead-time of 300μs to separate the main breaker contacts. Furthermore, a maximum peak current injection of RA at a frequency of 500Hz could be obtained in order to produce an artificial current-zero in the vacuum breaker. A successful current interruption with a prospective value of RA was achieved by the hybrid switching technique. In addition, measures were taken to prevent overvoltages. Experimentally, the concept of a hybrid breaker was compared with the functioning of all mechanical (air breaker) and all electronical (IGCT breaker) versions. Although a single stage interrupting method was verified experimentally, two two-stage interrupting methods were analyzed theoretically.

A Guide for Industrial Mobilization

DTIC Science & Technology

1989-03-01

packages; and cient, increased production controls may be needed. These actions include: i. Releasing machine tool trigger or- ders and increasing buys...710). the Department of Defense to maintain facili- 4. The National Defense Act authorizes: ties, machine tools , production equipment, and skilled...Defense Industrial Reserve Act pro- Room 3876, U.S. Departm nt of Commerce vides for the reserve of machine tools and other Washington, D.C. 20230 or

Hybrid-secondary uncluttered permanent magnet machine and method

DOEpatents

Hsu, John S.

2005-12-20

An electric machine (40) has a stator (43), a permanent magnet rotor (38) with permanent magnets (39) and a magnetic coupling uncluttered rotor (46) for inducing a slip energy current in secondary coils (47). A dc flux can be produced in the uncluttered rotor when the secondary coils are fed with dc currents. The magnetic coupling uncluttered rotor (46) has magnetic brushes (A, B, C, D) which couple flux in through the rotor (46) to the secondary coils (47c, 47d) without inducing a current in the rotor (46) and without coupling a stator rotational energy component to the secondary coils (47c, 47d). The machine can be operated as a motor or a generator in multi-phase or single-phase embodiments and is applicable to the hybrid electric vehicle. A method of providing a slip energy controller is also disclosed.

Fast Charging Electric Vehicle Research & Development Project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Heny, Michael

The research and development project supported the engineering, design and implementation of on-road Electric Vehicle (“EV”) charging technologies. It included development of potential solutions for DC fast chargers (“DCFC”) capable of converting high voltage AC power to the DC power required by EVs. Additional development evaluated solutions related to the packaging of power electronic components and enclosure design, as well as for the design and evaluation of EV charging stations. Research compared different charging technologies to identify optimum applications in a municipal fleet. This project collected EV usage data and generated a report demonstrating that EVs, when supported by adequatemore » charging infrastructure, are capable of replacing traditional internal combustion vehicles in many municipal applications. The project’s period of performance has demonstrated various methods of incorporating EVs into a municipal environment, and has identified three general categories for EV applications: Short Commute: Defined as EVs performing in limited duration, routine commutes. - Long Commute: Defined as tasks that require EVs to operate in longer daily mileage patterns. - Critical Needs: Defined as the need for EVs to be ready at every moment for indefinite periods. Together, the City of Charlottesville, VA (the “City”) and Aker Wade Power Technologies, LLC (“Aker Wade”) concluded that the EV has a viable position in many municipal fleets but with limited recommendation for use in Critical Needs applications such as Police fleets. The report also documented that, compared to internal combustion vehicles, BEVs have lower vehicle-related greenhouse gas (“GHG”) emissions and contribute to a reduction of air pollution in urban areas. The enhanced integration of EVs in a municipal fleet can result in reduced demand for imported oil and reduced municipal operating costs. The conclusions indicated in the project’s Engineering Report (see Attachment A) are intended to assist future implementation of electric vehicle technology. They are based on the cited research and on the empirical data collected and presented. The report is not expected to represent the entire operating conditions of any of the equipment under consideration within this project, and tested equipment may operate differently under other conditions.« less

Voltage source ac-to-dc converters for high-power transmitters

NASA Technical Reports Server (NTRS)

Cormier, R.

1990-01-01

This work was done to optimize the design of the components used for the beam power supply, which is a component of the transmitters in the Deep Space Network (DSN). The major findings are: (1) the difference in regulation between a six-pulse and a twelve-pulse converter is at most 7 percent worse for the twelve-pulse converter; (2) the commutation overlap angle of a current source converter equals that of a voltage source converter with continuous line currents; (3) the sources of uncharacteristic harmonics are identified with SPICE simulation; (4) the use of an imperfect phase-shifting transformer for the twelve-pulse converter generates a harmonic at six times the line frequency; and (5) the assumptions usually made in analyzing converters can be relaxed with SPICE simulation. The results demonstrate the suitability of using SPICE simulation to obtain detailed performance predictions of ac-to-dc converters.

Application of an onboard processor to the OAO C spacecraft

NASA Technical Reports Server (NTRS)

Stewart, W. N.; Hartenstein, R. G.; Trevathan, C.

1972-01-01

The design of a stored program computer for spacecraft use and its application on the fourth Orbiting Astronomical Observatory (OAO) is reported. The computer is a medium scale, parallel machine with a memory capacity of 16384 words of 18 bits each. It possesses a comprehensive instruction repertoire and operates on 45 W of power (including the dc-to-dc converter). The machine operates at a 500-kHz rate and executes an add instruction in 10 microseconds. Its primary functions on OAO C will be auxiliary command storage, spacecraft monitoring and malfunction reporting, data compression and status summary, and possible performance of emergency corrective action for certain anomalous situations.

Design of Feedforward Controller to Reduce Force Ripple for Linear Motor using Halbach Magnet Array with T Shape Magnet

NASA Astrophysics Data System (ADS)

Kim, Moojong; Kim, Jinyoung; Lee, Moon G.

Recently, in micro/nano fabrication equipments, linear motors are widely used as an actuator to position workpiece, machining tool and measurement head. To control them faster and more precise, the motor should have high actuating force and small force ripple. High actuating force enable us to more workpiece with high acceleration. Eventually, it may provide higher throughput. Force ripple gives detrimental effect on the precision and tracking performance of the equipments. In order to accomplish more precise motion, it is important to make lower the force ripple. Force ripple is categorized into cogging and mutual ripple. First is dependent on the shape of magnets and/or core. The second is not dependent on them but dependent on current commutation. In this work, coreless mover i.e. coil winding is applied to the linear motor to avoid the cogging ripple. Therefore, the mutual ripple is only considered to be minimized. Ideal Halbach magnet array has continuously varying magnetization. The THMA (Halbach magnet array with T shape magnets) is proposed to approximate the ideal one. The THMA can not produce ideal sinusoidal flux, therefore, the linear motor with THMA and sinusoidal commutation of current generates the mutual force ripple. In this paper, in order to compensate mutual force ripple by feedforward(FF) controller, we calculate the optimized commutation of input current. The ripple is lower than 1.17% of actuating force if the commutation current agree with the magnetic flux from THMA. The performance of feedforward(FF) controller is verified by experiment.

Dynamic modeling of brushless dc motors for aerospace actuation

NASA Technical Reports Server (NTRS)

Demerdash, N. A.; Nehl, T. W.

1980-01-01

A discrete time model for simulation of the dynamics of samarium cobalt-type permanent magnet brushless dc machines is presented. The simulation model includes modeling of the interaction between these machines and their attached power conditioners. These are transistorized conditioner units. This model is part of an overall discrete-time analysis of the dynamic performance of electromechanical actuators, which was conducted as part of prototype development of such actuators studied and built for NASA-Johnson Space Center as a prospective alternative to hydraulic actuators presently used in shuttle orbiter applications. The resulting numerical simulations of the various machine and power conditioner current and voltage waveforms gave excellent correlation to the actual waveforms collected from actual hardware experimental testing. These results, numerical and experimental, are presented here for machine motoring, regeneration and dynamic braking modes. Application of the resulting model to the determination of machine current and torque profiles during closed-loop actuator operation were also analyzed and the results are given here. These results are given in light of an overall view of the actuator system components. The applicability of this method of analysis to design optimization and trouble-shooting in such prototype development is also discussed in light of the results at hand.

Method for providing slip energy control in permanent magnet electrical machines

DOEpatents

Hsu, John S.

2006-11-14

An electric machine (40) has a stator (43), a permanent magnet rotor (38) with permanent magnets (39) and a magnetic coupling uncluttered rotor (46) for inducing a slip energy current in secondary coils (47). A dc flux can be produced in the uncluttered rotor when the secondary coils are fed with dc currents. The magnetic coupling uncluttered rotor (46) has magnetic brushes (A, B, C, D) which couple flux in through the rotor (46) to the secondary coils (47c, 47d) without inducing a current in the rotor (46) and without coupling a stator rotational energy component to the secondary coils (47c, 47d). The machine can be operated as a motor or a generator in multi-phase or single-phase embodiments and is applicable to the hybrid electric vehicle. A method of providing a slip energy controller is also disclosed.

Design description of the Schuchuli Village photovoltaic power system

NASA Technical Reports Server (NTRS)

Ratajczak, A. F.; Vasicek, R. W.; Delombard, R.

1981-01-01

A stand alone photovoltaic (PV) power system for the village of Schuchuli (Gunsight), Arizona, on the Papago Indian Reservation is a limited energy, all 120 V (d.c.) system to which loads cannot be arbitrarily added and consists of a 3.5 kW (peak) PV array, 2380 ampere-hours of battery storage, an electrical equipment building, a 120 V (d.c.) electrical distribution network, and equipment and automatic controls to provide control power for pumping water into an existing water system; operating 15 refrigerators, a clothes washing machine, a sewing machine, and lights for each of the homes and communal buildings. A solar hot water heater supplies hot water for the washing machine and communal laundry. Automatic control systems provide voltage control by limiting the number of PV strings supplying power during system operation and battery charging, and load management for operating high priority at the expense of low priority loads as the main battery becomes depleted.

Feasibility analysis of a novel hybrid-type superconducting circuit breaker in multi-terminal HVDC networks

NASA Astrophysics Data System (ADS)

Khan, Umer Amir; Lee, Jong-Geon; Seo, In-Jin; Amir, Faisal; Lee, Bang-Wook

2015-11-01

Voltage source converter-based HVDC systems (VSC-HVDC) are a better alternative than conventional thyristor-based HVDC systems, especially for developing multi-terminal HVDC systems (MTDC). However, one of the key obstacles in developing MTDC is the absence of an adequate protection system that can quickly detect faults, locate the faulty line and trip the HVDC circuit breakers (DCCBs) to interrupt the DC fault current. In this paper, a novel hybrid-type superconducting circuit breaker (SDCCB) is proposed and feasibility analyses of its application in MTDC are presented. The SDCCB has a superconducting fault current limiter (SFCL) located in the main current path to limit fault currents until the final trip signal is received. After the trip signal the IGBT located in the main line commutates the current into a parallel line where DC current is forced to zero by the combination of IGBTs and surge arresters. Fault simulations for three-, four- and five-terminal MTDC were performed and SDCCB performance was evaluated in these MTDC. Passive current limitation by SFCL caused a significant reduction of fault current interruption stress in the SDCCB. It was observed that the DC current could change direction in MTDC after a fault and the SDCCB was modified to break the DC current in both the forward and reverse directions. The simulation results suggest that the proposed SDCCB could successfully suppress the DC fault current, cause a timely interruption, and isolate the faulty HVDC line in MTDC.

Numerical simulation of dynamics of brushless dc motors for aerospace and other applications. Volume 1: Model development and applications, part B

NASA Technical Reports Server (NTRS)

Demerdash, N. A. O.; Nehl, T. W.

1979-01-01

A mathematical model was developed and computerized simulations were obtained for a brushless dc motor. Experimentally obtained oscillograms of the machine phase currents are presented and the corresponding current and voltage waveforms for various modes of operation of the motor are presented and discussed.

A lightweight electronically commutated dc motor for electric passenger vehicles

NASA Technical Reports Server (NTRS)

Echolds, E. F.; Walla, P. S.

1982-01-01

A functional model breadboard converter and a rare-earth-cobalt, permanent magnet motor; as well as an engineering model converter and PM motor suitable for vehicle installations were developed and tested. The converter and motor achieved an 88% peak efficiency, a maximum output of 26 kW at 26,000 rpm, and a continuous rating of 15 kW. The system also generated power to the source during braking, with a demonstrated peak power available at the converter terminals of approximately 26 kW at 88% efficiency. Major conclusions include: (1) the SAE J227a(D) driving cycle efficiency for the converter/motor is 86% to 88% when energy available for recovery at the converter terminals is included; (2) the converter initial cost is approximately five times that of the permanent magnet motor, but can be reduced by means of LSI logic and integrated liquid cooled semiconductor packages; and (3) an electronically commutated motor with a liquid cooled converter will operate reliably without service or maintenance for the life of a passenger vehicle.

A lightweight electronically commutated dc motor for electric passenger vehicles

NASA Astrophysics Data System (ADS)

Echolds, E. F.; Walla, P. S.

1982-09-01

A functional model breadboard converter and a rare-earth-cobalt, permanent magnet motor; as well as an engineering model converter and PM motor suitable for vehicle installations were developed and tested. The converter and motor achieved an 88% peak efficiency, a maximum output of 26 kW at 26,000 rpm, and a continuous rating of 15 kW. The system also generated power to the source during braking, with a demonstrated peak power available at the converter terminals of approximately 26 kW at 88% efficiency. Major conclusions include: (1) the SAE J227a(D) driving cycle efficiency for the converter/motor is 86% to 88% when energy available for recovery at the converter terminals is included; (2) the converter initial cost is approximately five times that of the permanent magnet motor, but can be reduced by means of LSI logic and integrated liquid cooled semiconductor packages; and (3) an electronically commutated motor with a liquid cooled converter will operate reliably without service or maintenance for the life of a passenger vehicle.

Advanced electric propulsion system concept for electric vehicles. Addendum 1: Voltage considerations

NASA Technical Reports Server (NTRS)

Raynard, A. E.; Forbes, F. E.

1980-01-01

The two electric vehicle propulsion systems that best met cost and performance goals were examined to assess the effect of battery pack voltage on system performance and cost. A voltage range of 54 to 540 V was considered for a typical battery pack capacity of 24 k W-hr. The highest battery specific energy (W-hr/kg) and the lowest cost ($/kW-hr) were obtained at the minimum voltage level. The flywheel system traction motor is a dc, mechanically commutated with shunt field control, and due to the flywheel the traction motor and the battery are not subject to extreme peaks of power demand. The basic system uses a permanent-magnet motor with electronic commutation supplied by an ac power control unit. In both systems battery cost were the major factor in system voltage selection, and a battery pack with the minimum voltage of 54 V produced the lowest life-cycle cost. The minimum life-cycle cost for the basic system with lead-acid batteries was $0.057/km and for the flywheel system was $0.037/km.

A superconducting homopolar motor and generator—new approaches

NASA Astrophysics Data System (ADS)

Fuger, Rene; Matsekh, Arkadiy; Kells, John; Sercombe, D. B. T.; Guina, Ante

2016-03-01

Homopolar machines were the first continuously running electromechanical converters ever demonstrated but engineering challenges and the rapid development of AC technology prevented wider commercialisation. Recent developments in superconducting, cryogenic and sliding contact technology together with new areas of application have led to a renewed interest in homopolar machines. Some of the advantages of these machines are ripple free constant torque, pure DC operation, high power-to-weight ratio and that rotating magnets or coils are not required. In this paper we present our unique approach to high power and high torque homopolar electromagnetic turbines using specially designed high field superconducting magnets and liquid metal current collectors. The unique arrangement of the superconducting coils delivers a high static drive field as well as effective shielding for the field critical sliding contacts. The novel use of additional shielding coils reduces weight and stray field of the system. Liquid metal current collectors deliver a low resistance, stable and low maintenance sliding contact by using a thin liquid metal layer that fills a circular channel formed by the moving edge of a rotor and surrounded by a conforming stationary channel of the stator. Both technologies are critical to constructing high performance machines. Homopolar machines are pure DC devices that utilise only DC electric and magnetic fields and have no AC losses in the coils or the supporting structure. Guina Energy Technologies has developed, built and tested different motor and generator concepts over the last few years and has combined its experience to develop a new generation of homopolar electromagnetic turbines. This paper summarises the development process, general design parameters and first test results of our high temperature superconducting test motor.

Servomotors. (Latest Citations from the Aerospace Database)

NASA Technical Reports Server (NTRS)

1996-01-01

The bibliography contains citations concerning the design, testing, and application of servomotors. AC, DC, and brushless motor drives are discussed. Applications are examined, including use in hydraulic presses; teleprinters; machine tools; sewing machines; and servocontrol devices for instrumentation, robots, and aircraft control. Testing methods evaluate precision, vibration and vibration reduction, and stability of servomotors.

A simple ERP method for quantitative analysis of cognitive workload in myoelectric prosthesis control and human-machine interaction.

PubMed

Deeny, Sean; Chicoine, Caitlin; Hargrove, Levi; Parrish, Todd; Jayaraman, Arun

2014-01-01

Common goals in the development of human-machine interface (HMI) technology are to reduce cognitive workload and increase function. However, objective and quantitative outcome measures assessing cognitive workload have not been standardized for HMI research. The present study examines the efficacy of a simple event-related potential (ERP) measure of cortical effort during myoelectric control of a virtual limb for use as an outcome tool. Participants trained and tested on two methods of control, direct control (DC) and pattern recognition control (PRC), while electroencephalographic (EEG) activity was recorded. Eighteen healthy participants with intact limbs were tested using DC and PRC under three conditions: passive viewing, easy, and hard. Novel auditory probes were presented at random intervals during testing, and significant task-difficulty effects were observed in the P200, P300, and a late positive potential (LPP), supporting the efficacy of ERPs as a cognitive workload measure in HMI tasks. LPP amplitude distinguished DC from PRC in the hard condition with higher amplitude in PRC, consistent with lower cognitive workload in PRC relative to DC for complex movements. Participants completed trials faster in the easy condition using DC relative to PRC, but completed trials more slowly using DC relative to PRC in the hard condition. The results provide promising support for ERPs as an outcome measure for cognitive workload in HMI research such as prosthetics, exoskeletons, and other assistive devices, and can be used to evaluate and guide new technologies for more intuitive HMI control.

78 FR 76101 - Meetings

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-16

... Board meetings in Washington, DC, Monday through Wednesday, January 13-15, 2014 at the times and...-Service Transaction Machines; Information and Communications Technologies; Classroom Acoustics; Emergency...

Automated discrimination of dicentric and monocentric chromosomes by machine learning-based image processing.

PubMed

Li, Yanxin; Knoll, Joan H; Wilkins, Ruth C; Flegal, Farrah N; Rogan, Peter K

2016-05-01

Dose from radiation exposure can be estimated from dicentric chromosome (DC) frequencies in metaphase cells of peripheral blood lymphocytes. We automated DC detection by extracting features in Giemsa-stained metaphase chromosome images and classifying objects by machine learning (ML). DC detection involves (i) intensity thresholded segmentation of metaphase objects, (ii) chromosome separation by watershed transformation and elimination of inseparable chromosome clusters, fragments and staining debris using a morphological decision tree filter, (iii) determination of chromosome width and centreline, (iv) derivation of centromere candidates, and (v) distinction of DCs from monocentric chromosomes (MC) by ML. Centromere candidates are inferred from 14 image features input to a Support Vector Machine (SVM). Sixteen features derived from these candidates are then supplied to a Boosting classifier and a second SVM which determines whether a chromosome is either a DC or MC. The SVM was trained with 292 DCs and 3135 MCs, and then tested with cells exposed to either low (1 Gy) or high (2-4 Gy) radiation dose. Results were then compared with those of 3 experts. True positive rates (TPR) and positive predictive values (PPV) were determined for the tuning parameter, σ. At larger σ, PPV decreases and TPR increases. At high dose, for σ = 1.3, TPR = 0.52 and PPV = 0.83, while at σ = 1.6, the TPR = 0.65 and PPV = 0.72. At low dose and σ = 1.3, TPR = 0.67 and PPV = 0.26. The algorithm differentiates DCs from MCs, overlapped chromosomes and other objects with acceptable accuracy over a wide range of radiation exposures. © 2016 Wiley Periodicals, Inc.

Permanent magnet machine and method with reluctance poles and non-identical PM poles for high density operation

DOEpatents

Hsu, John S.

2010-05-18

A method and apparatus in which a stator (11) and a rotor (12) define a primary air gap (20) for receiving AC flux and at least one source (23, 40), and preferably two sources (23, 24, 40) of DC excitation are positioned for inducing DC flux at opposite ends of the rotor (12). Portions of PM material (17, 17a) are provided as boundaries separating PM rotor pole portions from each other and from reluctance poles. The PM poles (18) and the reluctance poles (19) can be formed with poles of one polarity having enlarged flux paths in relation to flux paths for pole portions of an opposite polarity, the enlarged flux paths communicating with a core of the rotor (12) so as to increase reluctance torque produced by the electric machine. Reluctance torque is increased by providing asymmetrical pole faces. The DC excitation can also use asymmetric poles and asymmetric excitation sources. Several embodiments are disclosed with additional variations.

Development of a high-efficiency motor/generator for flywheel energy storage

NASA Astrophysics Data System (ADS)

Lashley, Christopher; Anand, Dave K.; Kirk, James A.; Zmood, Ronald B.

This study addresses the design changes and extensions necessary to construct and test a working prototype of a motor/generator for a magnetically suspended flywheel energy storage system. The brushless motor controller for the motor was specified and the electronic commutation arrangement designed. The laminations were redesigned and fabricated using laser machining. Flux density measurements were made and the results used to redesign the armature windings. A test rig was designed and built, and the motor/generator was installed and speed tested to 9000 rpm. Experimental methods of obtaining the machine voltage and torque constants Kv and Kt, obtaining the useful air-gap flux density, and characterizing the motor and other system components are described. The measured Kv and Kt were approximately 40 percent greater than predicted by theory and initial experiment.

Development of a high-efficiency motor/generator for flywheel energy storage

NASA Technical Reports Server (NTRS)

Lashley, Christopher; Anand, Dave K.; Kirk, James A.; Zmood, Ronald B.

1991-01-01

This study addresses the design changes and extensions necessary to construct and test a working prototype of a motor/generator for a magnetically suspended flywheel energy storage system. The brushless motor controller for the motor was specified and the electronic commutation arrangement designed. The laminations were redesigned and fabricated using laser machining. Flux density measurements were made and the results used to redesign the armature windings. A test rig was designed and built, and the motor/generator was installed and speed tested to 9000 rpm. Experimental methods of obtaining the machine voltage and torque constants Kv and Kt, obtaining the useful air-gap flux density, and characterizing the motor and other system components are described. The measured Kv and Kt were approximately 40 percent greater than predicted by theory and initial experiment.

Accuracy of radiographic caries diagnosis using different X-ray generators.

PubMed

Svenson, B; Petersson, A

1989-05-01

Dental X-ray machines utilizing five different combinations of X-ray generators and tube voltages (Philips Oralix 65 kV, Siemens Heliodent EC 60 kV, Siemens Heliodent 70 kV, Soredex Minray DC 60 kV and Soredex Minray DC 70 kV) were compared with respect to the accuracy of radiographic diagnosis of proximal caries. Nine observers diagnosed proximal caries in radiographs of extracted premolars. The findings of the observers were compared to the actual presence or absence of caries. The ROC-curve technique was used to evaluate differences in diagnostic accuracy between the X-ray machines. The results showed small differences in diagnostic accuracy between the different X-ray generators but they proved to be statistically non-significant.

High Speed Turbo-Generator: Test Stand Simulator Including Turbine Engine Emulator

DTIC Science & Technology

2010-07-30

15% Shaft Power 4% 8% Our model of the six-phase synchronous machine was based on work by Schiferl and Ong [1]. The six-phase synchronous machine is...develop and submit to ONR a follow-on proposal to address these open issues. 27 REFERENCES [1] R. F. Schiferl and C. M. Ong, "Six phase...at 32 References [Al] R. F. Schiferl and C. M. Ong, "Six phase synchronous machine with ac and dc stator connections, Part I: Equivalent Circuit

Higher Efficiency HVAC Motors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Flynn, Charles Joseph

The objective of this project was to design and build a cost competitive, more efficient heating, ventilation, and air conditioning (HVAC) motor than what is currently available on the market. Though different potential motor architectures among QMP’s primary technology platforms were investigated and evaluated, including through the building of numerous prototypes, the project ultimately focused on scaling up QM Power, Inc.’s (QMP) Q-Sync permanent magnet synchronous motors from available sub-fractional horsepower (HP) sizes for commercial refrigeration fan applications to larger fractional horsepower sizes appropriate for HVAC applications, and to add multi-speed functionality. The more specific goal became the research, design,more » development, and testing of a prototype 1/2 HP Q-Sync motor that has at least two operating speeds and 87% peak efficiency compared to incumbent electronically commutated motors (EC or ECM, also known as brushless direct current (DC) motors), the heretofore highest efficiency HVACR fan motor solution, at approximately 82% peak efficiency. The resulting motor prototype built achieved these goals, hitting 90% efficiency and .95 power factor at full load and speed, and 80% efficiency and .7 power factor at half speed. Q-Sync, developed in part through a DOE SBIR grant (Award # DE-SC0006311), is a novel, patented motor technology that improves on electronically commutated permanent magnet motors through an advanced electronic circuit technology. It allows a motor to “sync” with the alternating current (AC) power flow. It does so by eliminating the constant, wasteful power conversions from AC to DC and back to AC through the synthetic creation of a new AC wave on the primary circuit board (PCB) by a process called pulse width modulation (PWM; aka electronic commutation) that is incessantly required to sustain motor operation in an EC permanent magnet motor. The Q-Sync circuit improves the power factor of the motor by removing all failure prone capacitors from the power stage. Q-Sync’s simpler electronics also result in higher efficiency because it eliminates the power required by the PCB to perform the obviated power conversions and PWM processes after line synchronous operating speed is reached in the first 5 seconds of operation, after which the PWM circuits drop out and a much less energy intensive “pass through” circuit takes over, allowing the grid-supplied AC power to sustain the motor’s ongoing operation.« less

36 CFR 1254.84 - How may I use a debit card for copiers in the Washington, DC, area?

Code of Federal Regulations, 2011 CFR

2011-07-01

... NATIONAL ARCHIVES AND RECORDS ADMINISTRATION PUBLIC AVAILABILITY AND USE USING RECORDS AND DONATED... machines located in the research rooms. Inserting the debit card into a card reader connected to the copier... add value to your card using the vending machine in the research room or at the Cashier's Office. We...

Near hybrid passenger vehicle development program, phase 1. Appendices A and B. Mission analysis and performance specification studies report, volume 1

NASA Technical Reports Server (NTRS)

1979-01-01

The three most promising vehicle use patterns (missions) for the near term electric hybrid vehicle were found to be all-purpose city driving, commuting, and family and civic business. The mission selection process was based principally on an analysis of the travel patterns found in the Nationwide Transportation Survey and on the Los Angeles and Washington, D.C. origin-destination studies data. Travel patterns in turn were converted to fuel requirements for 1985 conventional and hybrid cars. By this means, the potential fuel savings for each mission were estimated, and preliminary design requirements for hybrid vehicles were derived.

Advanced Propulsion Power Distribution System for Next Generation Electric/Hybrid Vehicle. Phase 1; Preliminary System Studies

NASA Technical Reports Server (NTRS)

Bose, Bimal K.; Kim, Min-Huei

1995-01-01

The report essentially summarizes the work performed in order to satisfy the above project objective. In the beginning, different energy storage devices, such as battery, flywheel and ultra capacitor are reviewed and compared, establishing the superiority of the battery. Then, the possible power sources, such as IC engine, diesel engine, gas turbine and fuel cell are reviewed and compared, and the superiority of IC engine has been established. Different types of machines for drive motor/engine generator, such as induction machine, PM synchronous machine and switched reluctance machine are compared, and the induction machine is established as the superior candidate. Similar discussion was made for power converters and devices. The Insulated Gate Bipolar Transistor (IGBT) appears to be the most superior device although Mercury Cadmium Telluride (MCT) shows future promise. Different types of candidate distribution systems with the possible combinations of power and energy sources have been discussed and the most viable system consisting of battery, IC engine and induction machine has been identified. Then, HFAC system has been compared with the DC system establishing the superiority of the former. The detailed component sizing calculations of HFAC and DC systems reinforce the superiority of the former. A preliminary control strategy has been developed for the candidate HFAC system. Finally, modeling and simulation study have been made to validate the system performance. The study in the report demonstrates the superiority of HFAC distribution system for next generation electric/hybrid vehicle.

36 CFR 1254.84 - How may I use a debit card for copiers in the Washington, DC, area?

Code of Federal Regulations, 2012 CFR

2012-07-01

...'s Office is closed or at any other time during the hours research rooms are open as cited in part... machines located in the research rooms. Inserting the debit card into a card reader connected to the copier... add value to your card using the vending machine in the research room or at the Cashier's Office. We...

36 CFR 1254.84 - How may I use a debit card for copiers in the Washington, DC, area?

Code of Federal Regulations, 2014 CFR

2014-07-01

...'s Office is closed or at any other time during the hours research rooms are open as cited in part... machines located in the research rooms. Inserting the debit card into a card reader connected to the copier... add value to your card using the vending machine in the research room or at the Cashier's Office. We...

Servomotors . (Latest citations from the Aerospace Database)

NASA Technical Reports Server (NTRS)

1997-01-01

The bibliography contains citations concerning the design, testing, and application of servomotors. AC, DC, and brushless motor drives are discussed. Applications are examined, including use in hydraulic presses; teleprinters; machine tools; sewing machines; and servocontrol devices for instrumentation, robots, and aircraft control. Testing methods evaluate precision, vibration and vibration reduction, and stability of servomotors. (Contains 50-250 citations and includes a subject term index and title list.)

Deep Convolutional Extreme Learning Machine and Its Application in Handwritten Digit Classification

PubMed Central

Yang, Xinyi

2016-01-01

In recent years, some deep learning methods have been developed and applied to image classification applications, such as convolutional neuron network (CNN) and deep belief network (DBN). However they are suffering from some problems like local minima, slow convergence rate, and intensive human intervention. In this paper, we propose a rapid learning method, namely, deep convolutional extreme learning machine (DC-ELM), which combines the power of CNN and fast training of ELM. It uses multiple alternate convolution layers and pooling layers to effectively abstract high level features from input images. Then the abstracted features are fed to an ELM classifier, which leads to better generalization performance with faster learning speed. DC-ELM also introduces stochastic pooling in the last hidden layer to reduce dimensionality of features greatly, thus saving much training time and computation resources. We systematically evaluated the performance of DC-ELM on two handwritten digit data sets: MNIST and USPS. Experimental results show that our method achieved better testing accuracy with significantly shorter training time in comparison with deep learning methods and other ELM methods. PMID:27610128

Deep Convolutional Extreme Learning Machine and Its Application in Handwritten Digit Classification.

PubMed

Pang, Shan; Yang, Xinyi

2016-01-01

In recent years, some deep learning methods have been developed and applied to image classification applications, such as convolutional neuron network (CNN) and deep belief network (DBN). However they are suffering from some problems like local minima, slow convergence rate, and intensive human intervention. In this paper, we propose a rapid learning method, namely, deep convolutional extreme learning machine (DC-ELM), which combines the power of CNN and fast training of ELM. It uses multiple alternate convolution layers and pooling layers to effectively abstract high level features from input images. Then the abstracted features are fed to an ELM classifier, which leads to better generalization performance with faster learning speed. DC-ELM also introduces stochastic pooling in the last hidden layer to reduce dimensionality of features greatly, thus saving much training time and computation resources. We systematically evaluated the performance of DC-ELM on two handwritten digit data sets: MNIST and USPS. Experimental results show that our method achieved better testing accuracy with significantly shorter training time in comparison with deep learning methods and other ELM methods.

Electric vehicle traction motors - The development of an advanced motor concept

NASA Technical Reports Server (NTRS)

Campbell, P.

1980-01-01

An axial-field permanent magnet traction motor is described, similar to several advanced motors that are being developed in the United States. This type of machine has several advantages over conventional dc motors, particularly in the electric vehicle application. The rapidly changing cost of magnetic materials, particularly cobalt, makes it important to study the utilization of permanent magnet materials in such machines. The impact of different magnets on machine design is evaluated, and the advantages of using iron powder composites in the armature are assessed.

36 CFR § 1254.84 - How may I use a debit card for copiers in the Washington, DC, area?

Code of Federal Regulations, 2013 CFR

2013-07-01

...'s Office is closed or at any other time during the hours research rooms are open as cited in part... machines located in the research rooms. Inserting the debit card into a card reader connected to the copier... add value to your card using the vending machine in the research room or at the Cashier's Office. We...

Methods, systems and apparatus for adjusting duty cycle of pulse width modulated (PWM) waveforms

DOEpatents

Gallegos-Lopez, Gabriel; Kinoshita, Michael H; Ransom, Ray M; Perisic, Milun

2013-05-21

Embodiments of the present invention relate to methods, systems and apparatus for controlling operation of a multi-phase machine in a vector controlled motor drive system when the multi-phase machine operates in an overmodulation region. The disclosed embodiments provide a mechanism for adjusting a duty cycle of PWM waveforms so that the correct phase voltage command signals are applied at the angle transitions. This can reduce variations/errors in the phase voltage command signals applied to the multi-phase machine so that phase current may be properly regulated thus reducing current/torque oscillation, which can in turn improve machine efficiency and performance, as well as utilization of the DC voltage source.

Design and application of electromechanical actuators for deep space missions

NASA Technical Reports Server (NTRS)

Haskew, Tim A.; Wander, John

1993-01-01

The annual report Design and Application of Electromechanical Actuators for Deep Space Missions is presented. The reporting period is 16 Aug. 1992 to 15 Aug. 1993. However, the primary focus will be work performed since submission of our semi-annual progress report in Feb. 1993. Substantial progress was made. We currently feel confident in providing guidelines for motor and control strategy selection in electromechanical actuators to be used in thrust vector control (TVC) applications. A small portion was presented in the semi-annual report. At this point, we have implemented highly detailed simulations of various motor/drive systems. The primary motor candidates were the brushless dc machine, permanent magnet synchronous machine, and the induction machine. The primary control implementations were pulse width modulation and hysteresis current control. Each of the two control strategies were applied to each of the three motor choices. With either pulse width modulation or hysteresis current control, the induction machine was always vector controlled. A standard test position command sequence for system performance evaluation is defined. Currently, we are gathering all of the necessary data for formal presentation of the results. Briefly stated for TVC application, we feel that the brushless dc machine operating under PWM current control is the best option. Substantial details on the topic, with supporting simulation results, will be provided later, in the form of a technical paper prepared for submission and also in the next progress report with more detail than allowed for paper publication.

An In-Rush Current Suppression Technique for the Solid-State Transfer Switch System

NASA Astrophysics Data System (ADS)

Cheng, Po-Tai; Chen, Yu-Hsing

More and more utility companies provide dual power feeders as a premier service of high power quality and reliability. To take advantage of this, the solid-state transfer switch (STS) is adopted to protect the sensitive load against the voltage sag. However, the fast transfer process may cause in-rush current on the load-side transformer due to the resulting DC-offset in its magnetic flux as the load-transfer is completed. The in-rush current can reach 2∼6 p.u. and it may trigger the over-current protections on the power feeder. This paper develops a flux estimation scheme and a thyristor gating scheme based on the impulse commutation bridge STS (ICBSTS) to minimize the DC-offset on the magnetic flux. By sensing the line voltages of both feeders, the flux estimator can predict the peak transient flux linkage at the moment of load-transfer and evaluate a suitable moment for the transfer to minimize the in-rush current. Laboratory test results are presented to validate the performance of the proposed system.

Design and control of the phase current of a brushless dc motor to eliminate cogging torque

NASA Astrophysics Data System (ADS)

Jang, G. H.; Lee, C. J.

2006-04-01

This paper presents a design and control method of the phase current to reduce the torque ripple of a brushless dc (BLDC) motor by eliminating cogging torque. The cogging torque is the main source of torque ripple and consequently of speed error, and it is also the excitation source to generate the vibration and noise of a motor. This research proposes a modified current wave form, which is composed of main and auxiliary currents. The former is the conventional current to generate the commutating torque. The latter generates the torque with the same magnitude and opposite sign of the corresponding cogging torque at the given position in order to eliminate the cogging torque. Time-stepping finite element method simulation considering pulse-width-modulation switching method has been performed to verify the effectiveness of the proposed method, and it shows that this proposed method reduces torque ripple by 36%. A digital-signal-processor-based controller is also developed to implement the proposed method, and it shows that this proposed method reduces the speed ripple significantly.

Humans and machines in space: The vision, the challenge, the payoff; AAS Goddard Memorial Symposium, 29th, Washington, DC, March 14-15, 1991

NASA Astrophysics Data System (ADS)

Johnson, Bradley; May, Gayle L.; Korn, Paula

A recent symposium produced papers in the areas of solar system exploration, man machine interfaces, cybernetics, virtual reality, telerobotics, life support systems and the scientific and technology spinoff from the NASA space program. A number of papers also addressed the social and economic impacts of the space program. For individual titles, see A95-87468 through A95-87479.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brougham, Thomas; Andersson, Erika; Barnett, Stephen M.

A joint measurement of two observables is a simultaneous measurement of both quantities upon the same quantum system. When two quantum-mechanical observables do not commute, then a joint measurement of these observables cannot be accomplished directly by projective measurements alone. In this paper we shall discuss the use of quantum cloning to perform a joint measurement of two components of spin associated with a qubit system. We introduce cloning schemes which are optimal with respect to this task. The cloning schemes may be thought to work by cloning two components of spin onto their outputs. We compare the proposed cloningmore » machines to existing cloners.« less

Power Electronic Transformer based Three-Phase PWM AC Drives

NASA Astrophysics Data System (ADS)

Basu, Kaushik

A Transformer is used to provide galvanic isolation and to connect systems at different voltage levels. It is one of the largest and most expensive component in most of the high voltage and high power systems. Its size is inversely proportional to the operating frequency. The central idea behind a power electronic transformer (PET) also known as solid state transformer is to reduce the size of the transformer by increasing the frequency. Power electronic converters are used to change the frequency of operation. Steady reduction in the cost of the semiconductor switches and the advent of advanced magnetic materials with very low loss density and high saturation flux density implies economic viability and feasibility of a design with high power density. Application of PET is in generation of power from renewable energy sources, especially wind and solar. Other important application include grid tied inverters, UPS e.t.c. In this thesis non-resonant, single stage, bi-directional PET is considered. The main objective of this converter is to generate adjustable speed and magnitude pulse width modulated (PWM) ac waveforms from an ac or dc grid with a high frequency ac link. The windings of a high frequency transformer contains leakage inductance. Any switching transition of the power electronic converter connecting the inductive load and the transformer requires commutation of leakage energy. Commutation by passive means results in power loss, decrease in the frequency of operation, distortion in the output voltage waveform, reduction in reliability and power density. In this work a source based partially loss-less commutation of leakage energy has been proposed. This technique also results in partial soft-switching. A series of converters with novel PWM strategies have been proposed to minimize the frequency of leakage inductance commutation. These PETs achieve most of the important features of modern PWM ac drives including 1) Input power factor correction, 2) Common-mode voltage suppression at the load end, 3) High quality output voltage waveform (comparable to conventional space vector PWM modulated two level inverter) and 4) Minimization of output voltage loss, common-mode voltage switching and distortion of the load current waveform due to leakage inductance commutation. All of the proposed topologies along with the proposed control schemes have been analyzed and simulated in MATLABSimulink. A hardware prototype has been fabricated and tested. The simulation and experimental results verify the operation and advantages of the proposed topologies and their control.

Models of MOS and SOS devices

NASA Technical Reports Server (NTRS)

Gassaway, J. D.; Mahmood, Q.; Trotter, J. D.

1980-01-01

Quarterly report describes progress in three programs: dc sputtering machine for aluminum and aluminum alloys; two dimensional computer modeling of MOS transistors; and development of computer techniques for calculating redistribution diffusion of dopants in silicon on sapphire films.

Solar pv fed stand-alone excitation system of a synchronous machine for reactive power generation

NASA Astrophysics Data System (ADS)

Sudhakar, N.; Jain, Siddhartha; Jyotheeswara Reddy, K.

2017-11-01

This paper presents a model of a stand-alone solar energy conversion system based on synchronous machine working as a synchronous condenser in overexcited state. The proposed model consists of a Synchronous Condenser, a DC/DC boost converter whose output is fed to the field of the SC. The boost converter is supplied by the modelled solar panel and a day time variable irradiance is fed to the panel during the simulation time. The model also has one alternate source of rechargeable batteries for the time when irradiance falls below a threshold value. Also the excess power produced when there is ample irradiance is divided in two parts and one is fed to the boost converter while other is utilized to recharge the batteries. A simulation is done in MATLAB-SIMULINK and the obtained results show the utility of such modelling for supplying reactive power is feasible.

Advanced dc motor controller for battery-powered electric vehicles

NASA Technical Reports Server (NTRS)

Belsterling, C. A.

1981-01-01

A motor generation set is connected to run from the dc source and generate a voltage in the traction motor armature circuit that normally opposes the source voltage. The functional feasibility of the concept is demonstrated with tests on a Proof of Principle System. An analog computer simulation is developed, validated with the results of the tests, applied to predict the performance of a full scale Functional Model dc Controller. The results indicate high efficiencies over wide operating ranges and exceptional recovery of regenerated energy. The new machine integrates both motor and generator on a single two bearing shaft. The control strategy produces a controlled bidirectional plus or minus 48 volts dc output from the generator permitting full control of a 96 volt dc traction motor from a 48 volt battery, was designed to control a 20 hp traction motor. The controller weighs 63.5 kg (140 lb.) and has a peak efficiency of 90% in random driving modes and 96% during the SAE J 227a/D driving cycle.

77 FR 69824 - Certain New Chemicals; Receipt and Status Information

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-21

... identification, pass through a metal detector, and sign the EPA visitor log. All visitor bags are processed through an X-ray machine and subject to search. Visitors will be provided an EPA/DC badge that must be...

Nonlinear control of voltage source converters in AC-DC power system.

PubMed

Dash, P K; Nayak, N

2014-07-01

This paper presents the design of a robust nonlinear controller for a parallel AC-DC power system using a Lyapunov function-based sliding mode control (LYPSMC) strategy. The inputs for the proposed control scheme are the DC voltage and reactive power errors at the converter station and the active and reactive power errors at the inverter station of the voltage-source converter-based high voltage direct current transmission (VSC-HVDC) link. The stability and robust tracking of the system parameters are ensured by applying the Lyapunov direct method. Also the gains of the sliding mode control (SMC) are made adaptive using the stability conditions of the Lyapunov function. The proposed control strategy offers invariant stability to a class of systems having modeling uncertainties due to parameter changes and exogenous inputs. Comprehensive computer simulations are carried out to verify the proposed control scheme under several system disturbances like changes in short-circuit ratio, converter parametric changes, and faults on the converter and inverter buses for single generating system connected to the power grid in a single machine infinite-bus AC-DC network and also for a 3-machine two-area power system. Furthermore, a second order super twisting sliding mode control scheme has been presented in this paper that provides a higher degree of nonlinearity than the LYPSMC and damps faster the converter and inverter voltage and power oscillations. Copyright © 2014 ISA. Published by Elsevier Ltd. All rights reserved.

Commuting behaviors and exposure to air pollution in Montreal, Canada.

PubMed

Miao, Qun; Bouchard, Michèle; Chen, Dongmei; Rosenberg, Mark W; Aronson, Kristan J

2015-03-01

Vehicular traffic is a major source of outdoor air pollution in urban areas, and studies have shown that air pollution is worse during hours of commuting to and from work and school. However, it is unclear to what extent different commuting behaviors are a source of air pollution compared to non-commuters, and if air pollution exposure actually differs by the mode of commuting. This study aimed to examine the relationships between commuting behaviors and air pollution exposure levels measured by urinary 1-OHP (1-hydroxypyrene), a biomarker of exposure to polycyclic aromatic hydrocarbons (PAHs). A cross-sectional study of 174 volunteers living in Montreal, 92 females and 82 males, aged 20 to 53 years was conducted in 2011. Each participant completed a questionnaire regarding demographic factors, commuting behaviors, home and workplace addresses, and potential sources of PAH exposure, and provided a complete first morning void urine sample for 1-OHP analysis. Multivariable general linear regression models were used to examine the relationships between different types of commuting and urinary 1-OHP levels. Compared to non-commuters, commuters traveling by foot or bicycle and by car or truck had a significantly higher urinary 1-OHP concentration in urine (p=0.01 for foot or bicycle vs. non-commuters; p=0.02 for car or truck vs. non-commuters); those traveling with public transportation and combinations of two or more types of modes tended to have an increased 1-OHP level in urine (p=0.06 for public transportation vs. non-commuters; p=0.05 for commuters with combinations of two or more types of modes vs. non-commuters). No significant difference in urinary 1-OHP variation was found by mode of commuting. This preliminary study suggests that despite the mode of commuting, all types of commuting during rush hours increase exposure to air pollution as measured by a sensitive PAH metabolite biomarker, and mode of commuting did not explain exposure variation. Copyright © 2014 Elsevier B.V. All rights reserved.

AC/DC Power Systems with Applications for future Lunar/Mars base and Crew Exploration Vehicle

NASA Technical Reports Server (NTRS)

Chowdhury, Badrul H.

2005-01-01

ABSTRACT The Power Systems branch at JSC faces a number of complex issues as it readies itself for the President's initiative on future space exploration beyond low earth orbit. Some of these preliminary issues - those dealing with electric power generation and distribution on board Mars-bound vehicle and that on Lunar and Martian surface may be summarized as follows: Type of prime mover - Because solar power may not be readily available on parts of the Lunar/Mars surface and also during the long duration flight to Mars, the primary source of power will most likely be nuclear power (Uranium fuel rods) with a secondary source of fuel cell (Hydrogen supply). The electric power generation source - With nuclear power being the main prime mover, the electric power generation source will most likely be an ac generator at a yet to be determined frequency. Thus, a critical issue is whether the generator should generate at constant or variable frequency. This will decide what type of generator to use - whether it is a synchronous machine, an asynchronous induction machine or a switched reluctance machine. The type of power distribution system - the distribution frequency, number of wires (3- wire, 4-wire or higher), and ac/dc hybridization. Building redundancy and fault tolerance in the generation and distribution sub-systems so that the system is safe; provides 100% availability to critical loads; continues to operate even with faulted sub-systems; and requires minimal maintenance. This report descril_es results of a summer faculty fellowship spent in the Power Systems Branch with the specific aim of investigating some of the lessons learned in electric power generation and usage from the terrestrial power systems industry, the aerospace industry as well as NASA's on-going missions so as to recommend novel surface and vehicle-based power systems architectures in support of future space exploration initiatives. A hybrid ac/dc architecture with source side and load side redundancies and including emergency generators on both ac and dc sides is proposed. The generation frequency is 400 Hz mostly because of the technology maturity at this frequency in the aerospace industry. Power will be distributed to several ac load distribution buses through solid state variable speed, constant frequency converters on the ac side. A segmented dc ring bus supplied from ac/dc converters and with the capability of connecting/disconnecting the segments will supply power to multiple de load distribution buses. The system will have the capability of reverse flow from dc to ac side in the case of an extreme emergency on the main ac generation side.

14 CFR 298.52 - Air taxi operations by commuter air carriers.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 4 2012-01-01 2012-01-01 false Air taxi operations by commuter air... (AVIATION PROCEEDINGS) ECONOMIC REGULATIONS EXEMPTIONS FOR AIR TAXI AND COMMUTER AIR CARRIER OPERATIONS Commuter Air Carrier Authorizations § 298.52 Air taxi operations by commuter air carriers. (a) A commuter...

14 CFR 298.52 - Air taxi operations by commuter air carriers.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 4 2014-01-01 2014-01-01 false Air taxi operations by commuter air... (AVIATION PROCEEDINGS) ECONOMIC REGULATIONS EXEMPTIONS FOR AIR TAXI AND COMMUTER AIR CARRIER OPERATIONS Commuter Air Carrier Authorizations § 298.52 Air taxi operations by commuter air carriers. (a) A commuter...

14 CFR 298.52 - Air taxi operations by commuter air carriers.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 4 2013-01-01 2013-01-01 false Air taxi operations by commuter air... (AVIATION PROCEEDINGS) ECONOMIC REGULATIONS EXEMPTIONS FOR AIR TAXI AND COMMUTER AIR CARRIER OPERATIONS Commuter Air Carrier Authorizations § 298.52 Air taxi operations by commuter air carriers. (a) A commuter...

14 CFR 298.52 - Air taxi operations by commuter air carriers.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 4 2011-01-01 2011-01-01 false Air taxi operations by commuter air... (AVIATION PROCEEDINGS) ECONOMIC REGULATIONS EXEMPTIONS FOR AIR TAXI AND COMMUTER AIR CARRIER OPERATIONS Commuter Air Carrier Authorizations § 298.52 Air taxi operations by commuter air carriers. (a) A commuter...

14 CFR 298.52 - Air taxi operations by commuter air carriers.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Air taxi operations by commuter air... (AVIATION PROCEEDINGS) ECONOMIC REGULATIONS EXEMPTIONS FOR AIR TAXI AND COMMUTER AIR CARRIER OPERATIONS Commuter Air Carrier Authorizations § 298.52 Air taxi operations by commuter air carriers. (a) A commuter...

A COMPARISON OF THE COMMUTING AND NON-COMMUTING STUDENT.

ERIC Educational Resources Information Center

DRESSEL, PAUL L.; NISULA, EINAR S.

AN EXPLORATORY SURVEY INVESTIGATED THE COLLEGE EXPERIENCES AMONG COMMUTING STUDENTS, ATTENDING THREE TYPES OF INSTITUTIONS TO COMPARE COLLEGE EXPERIENCES BETWEEN COMMUTING AND RESIDENT STUDENTS. STUDENTS SELECTED FOR STUDY WERE (1) 100 COMMUTERS FROM A LARGE, PRIMARILY RESIDENT UNIVERSITY, (2) 100 COMMUTERS FROM A COMMUNITY COLLEGE WITH NO…

Setup for potential bias experiments on the Saha Institute of Nuclear Physics tokamak

NASA Astrophysics Data System (ADS)

Ghosh, J.; Pal, R.; Chattopadhyay, P. K.

1999-12-01

An experimental setup for studying the influence of the radial electric field on very low qa plasma on the Saha Institute of Nuclear Physics tokamak is presented. A high current, high voltage pulsed power supply, using a semiconductor controlled rectifier (SCR) as a dc switch is developed and used to bias a tungsten electrode inserted inside the plasma. The electrode's exposed length and its position inside the plasma are controlled by a double bellows assembly to optimize the electrode-exposed length. We show that using the force commutation method to turn the SCR off to get the power pulse desired has good potential for carrying out similar kinds of studies, especially in a low budget small tokamak.

Commuting, Life-Satisfaction and Internet Addiction.

PubMed

Lachmann, Bernd; Sariyska, Rayna; Kannen, Christopher; Stavrou, Maria; Montag, Christian

2017-10-05

The focus of the present work was on the association between commuting (business and private), life satisfaction, stress, and (over-) use of the Internet. Considering that digital devices are omnipresent in buses and trains, no study has yet investigated if commuting contributes to the development of Internet addiction. Overall, N = 5039 participants (N = 3477 females, age M = 26.79, SD = 10.68) took part in an online survey providing information regarding their commuting behavior, Internet addiction, personality, life satisfaction, and stress perception. Our findings are as follows: Personality seems to be less suitable to differentiate between commuter and non-commuter groups, which is possibly due to commuters often not having a choice but simply must accept offered job opportunities at distant locations. Second, the highest levels of satisfaction were found with income and lodging in the group commuting for business purposes. This might be related to the fact that commuting results in higher salaries (hence also better and more expensive housing style) due to having a job in another city which might exceed job opportunities at one's own living location. Third, within the business-commuters as well as in the private-commuter groups, females had significantly higher levels of stress than males. This association was not present in the non-commuter group. For females, commuting seems to be a higher burden and more stressful than for males, regardless of whether they commute for business or private reasons. Finally, we observed an association between higher stress perception (more negative attitude towards commuting) and Internet addiction. This finding suggests that some commuters try to compensate their perceived stress with increased Internet use.

Commuting, Life-Satisfaction and Internet Addiction

PubMed Central

Lachmann, Bernd; Sariyska, Rayna; Kannen, Christopher; Stavrou, Maria

2017-01-01

The focus of the present work was on the association between commuting (business and private), life satisfaction, stress, and (over-) use of the Internet. Considering that digital devices are omnipresent in buses and trains, no study has yet investigated if commuting contributes to the development of Internet addiction. Overall, N = 5039 participants (N = 3477 females, age M = 26.79, SD = 10.68) took part in an online survey providing information regarding their commuting behavior, Internet addiction, personality, life satisfaction, and stress perception. Our findings are as follows: Personality seems to be less suitable to differentiate between commuter and non-commuter groups, which is possibly due to commuters often not having a choice but simply must accept offered job opportunities at distant locations. Second, the highest levels of satisfaction were found with income and lodging in the group commuting for business purposes. This might be related to the fact that commuting results in higher salaries (hence also better and more expensive housing style) due to having a job in another city which might exceed job opportunities at one’s own living location. Third, within the business-commuters as well as in the private-commuter groups, females had significantly higher levels of stress than males. This association was not present in the non-commuter group. For females, commuting seems to be a higher burden and more stressful than for males, regardless of whether they commute for business or private reasons. Finally, we observed an association between higher stress perception (more negative attitude towards commuting) and Internet addiction. This finding suggests that some commuters try to compensate their perceived stress with increased Internet use. PMID:28981452

The Shock and Vibration Digest. Volume 9, Number 2. February 1977

DTIC Science & Technology

1977-02-01

15.00. Orders may be forwarded at Y1 -any time , in any form, to SVIC, Code 8404, Naval Research Laborotory, , Washington, D.C., 20375. Issuance of...new technology allows engi,;oers to determine shut-down times for reasons of safety and to avoid loss of productivity. No longer does a machine have to...likely become practical. Machine prognosis will allow the engineer to determine the most advantageous time for shut down. It will thus be possible to

Right Sizing the Force: Restructuring the Marine Light Attack Helicopter (HML/A) Squadron to Better Meet the Emerging Threat

DTIC Science & Technology

2009-04-29

visual coverage armed with responsive, high volume offensive or defensive door mounted machine guns and nearly 3600 weapons coverage. In addition, a fixed...forward gun option and forward firing rocket capacity substantially expand firepower options. Team this crew and machine with the world’s premiere...escort. 1 Headquarters, U. S. Marine Corps, Vision & Strategy 2025, (Washington, DC: Headquarters, U.S. Marine Corps, June 18, 2008), 9. 2 Scott Atwood

75 FR 8330 - Access to Confidential Business Information by Eastern Research Group

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-24

... identification, pass through a metal detector, and sign the EPA visitor log. All visitors' bags are processed through an X-ray machine and subject to search. Visitors will be provided an EPA/DC badge that must be...

77 FR 32633 - Approval of Test Marketing Exemptions for Certain New Chemicals

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-01

... identification, pass through a metal detector, and sign the EPA visitor log. All visitor bags are processed through an X-ray machine and subject to search. Visitors will be provided an EPA/DC badge that must be...

77 FR 68769 - Access to Confidential Business Information by Abt Associates, Inc.

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-16

... identification, pass through a metal detector, and sign the EPA visitor log. All visitor bags are processed through an X-ray machine and subject to search. Visitors will be provided an EPA/DC badge that must be...

77 FR 26750 - Agency Information Collection Activities; Proposed Collection; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-07

... identification, pass through a metal detector, and sign the EPA visitor log. All visitor bags are processed through an X-ray machine and subject to search. Visitors will be provided an EPA/DC badge that must be...

77 FR 21766 - Access to Confidential Business Information by CGI Federal Inc.

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-11

... identification, pass through a metal detector, and sign the EPA visitor log. All visitor bags are processed through an X-ray machine and subject to search. Visitors will be provided an EPA/DC badge that must be...

76 FR 38170 - Toxic Substances Control Act Chemical Testing; Receipt of Test Data

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-29

... photographic identification, pass through a metal detector, and sign the EPA visitor log. All visitor bags are processed through an X-ray machine and subject to search. Visitors will be provided an EPA/DC badge that...

77 FR 71417 - Agency Information Collection Activities; Proposed Collection; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-30

... identification, pass through a metal detector, and sign the EPA visitor log. All visitor bags are processed through an X-ray machine and subject to search. Visitors will be provided an EPA/DC badge that must be...

75 FR 56096 - Access to Confidential Business Information by Industrial Economics Incorporated

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-15

... photographic identification, pass through a metal detector, and sign the EPA visitor log. All visitor bags are processed through an X-ray machine and subject to search. Visitors will be provided an EPA/DC badge that...

78 FR 20101 - Access to Confidential Business Information by Chemical Abstract Services

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-03

... identification, pass through a metal detector, and sign the EPA visitor log. All visitor bags are processed through an X-ray machine and subject to search. Visitors will be provided an EPA/DC badge that must be...

Improvement of automatic fish feeder machine design

NASA Astrophysics Data System (ADS)

Chui Wei, How; Salleh, S. M.; Ezree, Abdullah Mohd; Zaman, I.; Hatta, M. H.; Zain, B. A. Md; Mahzan, S.; Rahman, M. N. A.; Mahmud, W. A. W.

2017-10-01

Nation Plan of action for management of fishing is target to achieve an efficient, equitable and transparent management of fishing capacity in marine capture fisheries by 2018. However, several factors influence the fishery production and efficiency of marine system such as automatic fish feeder machine could be taken in consideration. Two latest fish feeder machines have been chosen as the reference for this study. Based on the observation, it has found that the both machine was made with heavy structure, low water and temperature resistance materials. This research’s objective is to develop the automatic feeder machine to increase the efficiency of fish feeding. The experiment has conducted to testing the new design of machine. The new machine with maximum storage of 5 kg and functioning with two DC motors. This machine able to distribute 500 grams of pellets within 90 seconds and longest distance of 4.7 meter. The higher speed could reduce time needed and increase the distance as well. The minimum speed range for both motor is 110 and 120 with same full speed range of 255.

Impact of Distance on Mode of Active Commuting in Chilean Children and Adolescents

PubMed Central

Cristi-Montero, Carlos; Escobar-Gómez, Danica; Chillón, Palma

2017-01-01

Active commuting could contribute to increasing physical activity. The objective of this study was to characterise patterns of active commuting to and from schools in children and adolescents in Chile. A total of 453 Chilean children and adolescents aged between 10 and 18 years were included in this study. Data regarding modes of commuting and commuting distance was collected using a validated questionnaire. Commuting mode was classified as active commuting (walking and/or cycling) or non-active commuting (car, motorcycle and/or bus). Commuting distance expressed in kilometres was categorised into six subgroups (0 to 0.5, 0.6 to 1, 1.1 to 2, 2.1 to 3, 3.1 to 5 and >5 km). Car commuting was the main mode for children (to school 64.9%; from school 51.2%) and adolescents (to school 50.2%; from school 24.7%). Whereas public bus commuting was the main transport used by adolescents to return from school. Only 11.0% and 24.8% of children and adolescents, respectively, walk to school. The proportion of children and adolescents who engage in active commuting was lower in those covering longer distances compared to a short distance. Adolescents walked to and from school more frequently than children. These findings show that non-active commuting was the most common mode of transport and that journey distances may influence commuting modes in children and adolescents. PMID:29099044

Impact of Distance on Mode of Active Commuting in Chilean Children and Adolescents.

PubMed

Rodríguez-Rodríguez, Fernando; Cristi-Montero, Carlos; Celis-Morales, Carlos; Escobar-Gómez, Danica; Chillón, Palma

2017-11-02

Active commuting could contribute to increasing physical activity. The objective of this study was to characterise patterns of active commuting to and from schools in children and adolescents in Chile. A total of 453 Chilean children and adolescents aged between 10 and 18 years were included in this study. Data regarding modes of commuting and commuting distance was collected using a validated questionnaire. Commuting mode was classified as active commuting (walking and/or cycling) or non-active commuting (car, motorcycle and/or bus). Commuting distance expressed in kilometres was categorised into six subgroups (0 to 0.5, 0.6 to 1, 1.1 to 2, 2.1 to 3, 3.1 to 5 and >5 km). Car commuting was the main mode for children (to school 64.9%; from school 51.2%) and adolescents (to school 50.2%; from school 24.7%). Whereas public bus commuting was the main transport used by adolescents to return from school. Only 11.0% and 24.8% of children and adolescents, respectively, walk to school. The proportion of children and adolescents who engage in active commuting was lower in those covering longer distances compared to a short distance. Adolescents walked to and from school more frequently than children. These findings show that non-active commuting was the most common mode of transport and that journey distances may influence commuting modes in children and adolescents.

Status of high polarization DC high voltage Gallium Arsenide photoelectron guns

DOE Office of Scientific and Technical Information (OSTI.GOV)

M. Poelker, P. Adderley, J. Brittian, J. Clark, J. Grames, J. Hansknecht, J. McCarter, M. Stutzman, R. Suleiman, K. Surles-Law

2008-01-01

Users receive very high beam polarization from reliable GaAs photoelectron guns at facilities worldwide. Satisfaction with beam quality (and a number of lab closures) has reduced the level of polarized source R&D from the heyday of 1990s. However, new experiments and new accelerators proposals including high current unpolarized machines, require GaAs photoguns with capabilities that exceed today's state of the art. This submission describes the capabilities of today's high- polarization DC high voltage GaAs photoguns and discusses issues that must be addressed to meet new demands.

[Family factors influence active commuting to school in Spanish children].

PubMed

Rodríguez-López, Carlos; Villa-González, Emilio; Pérez-López, Isaac J; Delgado-Fernández, Manuel; Ruiz, Jonatan R; Chillón, Palma

2013-01-01

Active commuting to school is associated to higher levels of physical activity among children. Family factors may influence on this behaviour. The objective was to analyze the association between parents' occupational activity and parents' mode of commuting to work with the mode of commuting of their children. A total of 721 families from 4 primary schools in the province of Granada participated in this study. Families reported a questionnaire about mode of commuting of their children, parents' occupational activity and mode of commuting to work, distance and travel time to school. Associations between family's occupational activity and mode of commuting to work with mode of commuting to school of their children were examined using binary logistic regression analysis adjusting for age and children's distance to school. Children whose parents did not work used to engage in higher levels of active commuting to school than those whose parents worked (p = 0,023; OR: 2,67; 95% CI: 1,14-6,23). Children whose parents used to commute actively to work used to engage in higher levels of active commuting to school than those whose parents both used passive modes of commuting to work (p = 0,014; OR: 6,30; 95% CI: 1,45-27,26). Family factors are related to mode of commuting to school in children: Unemployed families and employed families where parent are active commuters to work are more used to have children that commuted to school using active modes. Copyright © AULA MEDICA EDICIONES 2013. Published by AULA MEDICA. All rights reserved.

Commuter exposure to PM2.5, BC, and UFP in six common transport microenvironments in Sacramento, California

NASA Astrophysics Data System (ADS)

Ham, Walter; Vijayan, Abhilash; Schulte, Nico; Herner, Jorn D.

2017-10-01

This study was designed to estimate and compare the air pollution exposures experienced by commuters in six common transportation modes utilized by California residents, and to evaluate the impact of practical exposure mitigation strategies in reducing commute exposures. We measured concentrations of fine particle matter (PM2.5), black carbon (BC), and ultrafine particles (UFP) for 161 commutes between April 2014 and November 2015 in Sacramento, CA. We collected measurements for six modes including single occupancy vehicles, high occupancy vehicles (multiple occupants), buses, light rail, train, and bicycling. The largest average concentrations for most pollutants were measured during train commutes and the lowest average concentrations were observed during light-rail commutes. Mitigation options were explored for personal vehicles, bicycling, and train commute modes. We found that ventilation settings of personal vehicles can reduce in-vehicle PM2.5, BC, and UFP concentrations by up to 75%. Similarly, bicycle route choice can reduce exposures by 15-75% with the lowest concentrations observed during commutes on dedicated bicycle paths away from traffic sources. Train commuters experienced UFP concentrations an order of magnitude greater when the locomotive engine was pulling the rail cars versus pushing the rail cars. We found that UFP concentrations during bus, bicycling, and train commutes were 1.6-5.3 times greater than personal vehicle commutes, while light rail commutes had 30% lower UFP concentrations than personal vehicle commutes. The largest exposure per mile occurred during bicycle commutes with PM2.5, BC, and UFP exposures of 1.312 μg/mile, 0.097 μg/mile, and 3.0 × 109 particles/mile, respectively. Train commutes experienced the largest exposure per mile of all of the combustion-derived transportation commute modes. BC accounted for 5-20% of total PM mass across all commute modes with an average fraction of ∼7% of PM2.5.

Magnetic loss and B(H) behaviour of non-oriented electrical sheets under a trapezoidal exciting field

NASA Astrophysics Data System (ADS)

Kedous-Lebouc, A.; Errard, S.; Cornut, B.; Brissonneau, P.

1994-05-01

The excess loss and hysteresis response of electrical steel are measured and discussed in the case of trapezoidal field excitation similar to the current provided by a current commutation supply of a self-synchronous rotating machine. Three industrial non-oriented SiFe samples of different magnetic grades and thicknesses are tested using an automatic Epstein frame equipment. The losses and the unusual observed B( H) loops are analysed in terms of the rate of change of the field, the diffusion of the induction inside the sheet and by the calculation of the theoretical hysteresis cycles due to the eddy currents.

Electric Drive Study

DTIC Science & Technology

1987-03-01

compound promises to reduce weight of future permanent magnet motors by 20 to 30 percent; a similar reduction is expected in size (approximately 20...drive systems. The AC permanent magnet (brushless DC motor) is rapidly evolving and will replace most electrically excited machines. Permanent magnet motors using

Center for Parallel Optimization

DTIC Science & Technology

1993-09-30

BOLLING AFB DC 20332-0001 _ii _ 11. SUPPLEMENTARY NOTES 12a. DISTRIBUTION/ AVAILABILITY STATEMENT 12b. DISTRIBUTION CODE APPROVED FOR PUBLIC RELEASE...Machines Corporation, March 16-19, 1993 , A Branch- and-Bound Method for Mixed Integer Programming on the CM-.5 "* Dr. Roberto Musmanno, University of

75 FR 57768 - Access to Confidential Business Information by Eastern Research Group and Its Identified...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-22

... photographic identification, pass through a metal detector, and sign the EPA visitor log. All visitor bags are processed through an X-ray machine and subject to search. Visitors will be provided an EPA/DC badge that...

76 FR 9012 - Access to Confidential Business Information by Electronic Consulting Services, Inc.

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-16

... identification, pass through a metal detector, and sign the EPA visitor log. All visitor bags are processed through an X-ray machine and subject to search. Visitors will be provided an EPA/DC badge that must be...

Relative commutativity degree of some dihedral groups

NASA Astrophysics Data System (ADS)

Abdul Hamid, Muhanizah; Mohd Ali, Nor Muhainiah; Sarmin, Nor Haniza; Abd Manaf, Fadila Normahia

2013-04-01

The commutativity degree of a finite group G was introduced by Erdos and Turan for symmetric groups, finite groups and finite rings in 1968. The commutativity degree, P(G), is defined as the probability that a random pair of elements in a group commute. The relative commutativity degree of a group G is defined as the probability for an element of subgroup, H and an element of G to commute with one another and denoted by P(H,G). In this research the relative commutativity degree of some dihedral groups are determined.

Choice of commuting mode among employees: Do home neighborhood environment, worksite neighborhood environment, and worksite policy and supports matter?

PubMed Central

Yang, Lin; Hipp, J. Aaron; Adlakha, Deepti; Marx, Christine M.; Tabak, Rachel G.; Brownson, Ross C.

2015-01-01

Background Promoting the use of public transit and active transport (walking and cycling) instead of car driving is an appealing strategy to increase overall physical activity. Purpose To quantify the combined associations between self-reported home and worksite neighborhood environments, worksite support and policies, and employees’ commuting modes. Method Between 2012 and 2013, participants residing in four Missouri metropolitan areas were interviewed via telephone (n = 1,338) and provided information on socio-demographic characteristics, home and worksite neighborhoods, and worksite support and policies. Commuting mode was self-reported and categorized into car driving, public transit, and active commuting. Commuting distance was calculated using geographic information systems. Commuters providing completed data were included in the analysis. Multivariate logistic regression models were used to examine the correlates of using public transit and active commuting. Result The majority of participants reported commuting by driving (88.9%); only 4.9% used public transit and 6.2% used active modes. After multivariate adjustment, having transit stops within 10-15 minutes walking distance from home (p=0.05) and using worksite incentive for public transit (p<0.001) were associated with commuting by public transit. Commuting distance (p<0.001) was negatively associated with active commuting. Having free or low cost recreation facilities around the worksite (p=0.04) and using bike facilities to lock bikes at the worksite (p<0.001) were associated with active commuting. Conclusion Both environment features and worksite supports and policies are associated with the choice of commuting mode. Future studies should use longitudinal designs to investigate the potential of promoting alternative commuting modes through worksite efforts that support sustainable commuting behaviors as well as the potential of built environment improvements. PMID:26085979

A Support Vector Machine based method to distinguish proteobacterial proteins from eukaryotic plant proteins

PubMed Central

2012-01-01

Background Members of the phylum Proteobacteria are most prominent among bacteria causing plant diseases that result in a diminution of the quantity and quality of food produced by agriculture. To ameliorate these losses, there is a need to identify infections in early stages. Recent developments in next generation nucleic acid sequencing and mass spectrometry open the door to screening plants by the sequences of their macromolecules. Such an approach requires the ability to recognize the organismal origin of unknown DNA or peptide fragments. There are many ways to approach this problem but none have emerged as the best protocol. Here we attempt a systematic way to determine organismal origins of peptides by using a machine learning algorithm. The algorithm that we implement is a Support Vector Machine (SVM). Result The amino acid compositions of proteobacterial proteins were found to be different from those of plant proteins. We developed an SVM model based on amino acid and dipeptide compositions to distinguish between a proteobacterial protein and a plant protein. The amino acid composition (AAC) based SVM model had an accuracy of 92.44% with 0.85 Matthews correlation coefficient (MCC) while the dipeptide composition (DC) based SVM model had a maximum accuracy of 94.67% and 0.89 MCC. We also developed SVM models based on a hybrid approach (AAC and DC), which gave a maximum accuracy 94.86% and a 0.90 MCC. The models were tested on unseen or untrained datasets to assess their validity. Conclusion The results indicate that the SVM based on the AAC and DC hybrid approach can be used to distinguish proteobacterial from plant protein sequences. PMID:23046503

Analysis, testing, and evaluation of faulted and unfaulted Wye, Delta, and open Delta connected electromechanical actuators

NASA Technical Reports Server (NTRS)

Nehl, T. W.; Demerdash, N. A.

1983-01-01

Mathematical models capable of simulating the transient, steady state, and faulted performance characteristics of various brushless dc machine-PSA (power switching assembly) configurations were developed. These systems are intended for possible future use as primemovers in EMAs (electromechanical actuators) for flight control applications. These machine-PSA configurations include wye, delta, and open-delta connected systems. The research performed under this contract was initially broken down into the following six tasks: development of mathematical models for various machine-PSA configurations; experimental validation of the model for failure modes; experimental validation of the mathematical model for shorted turn-failure modes; tradeoff study; and documentation of results and methodology.

An AC-electromagnetic bearing for flywheel energy storage in space

NASA Technical Reports Server (NTRS)

Nikolajsen, Jorgen L.

1993-01-01

A repulsive type AC-electromagnetic bearing was developed and tested. It was conceived on the basis of the so-called Magnetic River suspension for high-speed trains. The appearance of the bearing is similar to the traditional DC-type electromagnetic bearing but the operating principle is different. The magnets are fed with alternating current instead of direct current and the rotor is fitted with a conducting sleeve (e.g. aluminum) instead of a ferromagnetic sleeve. The repulsion is due to induction of eddy-currents in the conducting sleeve. The bearing is inherently stable and requires no feedback control. It provides support in five degrees of freedom such that a short rotor may be fully supported by a single bearing. These capabilities were demonstrated experimentally. On the down side, the load carrying capacity and the damping obtained so far were quite low compared to the DC-type bearing. Also, significant heating of the conducting sleeve was experienced. The AC-bearing is essentially a modified induction motor and there are strong indications that it can be run both as a motor and as a generator with no commutator requirements. It is therefore considered to be a good candidate for support of energy storage flywheels in space.

Development of a prototype magnetically suspended rotor ventricular assist device.

PubMed

Bearnson, G B; Maslen, E H; Olsen, D B; Allaire, P E; Khanwilkar, P S; Long, J W; Kim, H C

1996-01-01

A continuous flow centrifugal blood pump with magnetically suspended impeller has been designed, constructed, and tested. The system can be functionally divided into three subsystem designs: 1) centrifugal pump and flow paths, 2) magnetic bearings, and 3) brushless DC motor. The centrifugal pump is a Francis vane type design with a designed operating point of 6 L/min flow and 100 mmHg pressure rise at 2,300 RPM. Peak hydraulic efficiency is over 50%. The magnetic bearing system is an all active design with five axes of control. Rotor position sensors were developed as part of the system to provide feedback to a proportional-integral-derivative controller. The motor is a sensorless brushless DC motor. Back electromotive force voltage generated by the motor is used to provide commutation for the motor. No slots are employed in the motor design in order to reduce the radial force that the bearings must generate. Tests pumping blood in vitro were very encouraging; an index of hemolysis of 0.0086 +/- 0.0012 was measured. Further design refinement is needed to reduce power dissipation and size of the device. The concept of using magnetic bearings in a blood pump shows promise in a long-term implantable blood pump.

78 FR 75484 - Federal Management Regulation (FMR); Shipping Household Goods

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-12

... information on the commuted rate schedule and correct a Web site address. Commuted rate and actual expense are... commuted rate method. Using the commuted rate method, the individual assumes responsibility for shipment and payment. The commuted rate schedule establishes the reimbursement rate. DATES: Effective Date...

77 FR 24697 - Access to Confidential Business Information by CGI Federal Inc. and Its Identified Subcontractor...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-25

... identification, pass through a metal detector, and sign the EPA visitor log. All visitor bags are processed through an X-ray machine and subject to search. Visitors will be provided an EPA/DC badge that must be...

75 FR 70672 - Access to Confidential Business Information by Computer Sciences Corporation and Its Identified...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-18

... identification, pass through a metal detector, and sign the EPA visitor log. All visitor bags are processed through an X-ray machine and subject to search. Visitors will be provided an EPA/DC badge that must be...

76 FR 37111 - Access to Confidential Business Information by Computer Sciences Corporation and Its Identified...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-24

... identification, pass through a metal detector, and sign the EPA visitor log. All visitor bags are processed through an X-ray machine and subject to search. Visitors will be provided an EPA/DC badge that must be...

76 FR 10360 - Access to Confidential Business Information by Guident Technologies Inc. and Its Identified...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-24

... identification, pass through a metal detector, and sign the EPA visitor log. All visitor bags are processed through an X-ray machine and subject to search. Visitors will be provided an EPA/DC badge that must be...

77 FR 10506 - Access to Confidential Business Information by Syracuse Research Corporation, Inc., and Its...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-22

... identification, pass through a metal detector, and sign the EPA visitor log. All visitor bags are processed through an X-ray machine and subject to search. Visitors will be provided an EPA/DC badge that must be...

76 FR 77817 - Access to Confidential Business Information by CGI Federal, Inc. and Subcontractor, Innovate, Inc.

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-14

... identification, pass through a metal detector, and sign the EPA visitor log. All visitor bags are processed through an X-ray machine and subject to search. Visitors will be provided an EPA/DC badge that must be...

77 FR 69820 - Access to Confidential Business Information by Electronic Consulting Services, Inc., and Its...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-21

... identification, pass through a metal detector, and sign the EPA visitor log. All visitor bags are processed through an X-ray machine and subject to search. Visitors will be provided an EPA/DC badge that must be...

78 FR 59679 - Antimony Trioxide TSCA Chemical Risk Assessment; Notice of Public Meetings and Opportunity To...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-27

... identification, pass through a metal detector, and sign the EPA visitor log. All visitor bags are processed through an X- ray machine and subject to search. Visitors will be provided an EPA/DC badge that must be...

14 CFR 23.574 - Metallic damage tolerance and fatigue evaluation of commuter category airplanes.

Code of Federal Regulations, 2014 CFR

2014-01-01

... evaluation of commuter category airplanes. 23.574 Section 23.574 Aeronautics and Space FEDERAL AVIATION... COMMUTER CATEGORY AIRPLANES Structure Fatigue Evaluation § 23.574 Metallic damage tolerance and fatigue evaluation of commuter category airplanes. For commuter category airplanes— (a) Metallic damage tolerance. An...

14 CFR 23.574 - Metallic damage tolerance and fatigue evaluation of commuter category airplanes.

Code of Federal Regulations, 2012 CFR

2012-01-01

... evaluation of commuter category airplanes. 23.574 Section 23.574 Aeronautics and Space FEDERAL AVIATION... COMMUTER CATEGORY AIRPLANES Structure Fatigue Evaluation § 23.574 Metallic damage tolerance and fatigue evaluation of commuter category airplanes. For commuter category airplanes— (a) Metallic damage tolerance. An...

14 CFR 23.574 - Metallic damage tolerance and fatigue evaluation of commuter category airplanes.

Code of Federal Regulations, 2013 CFR

2013-01-01

... evaluation of commuter category airplanes. 23.574 Section 23.574 Aeronautics and Space FEDERAL AVIATION... COMMUTER CATEGORY AIRPLANES Structure Fatigue Evaluation § 23.574 Metallic damage tolerance and fatigue evaluation of commuter category airplanes. For commuter category airplanes— (a) Metallic damage tolerance. An...

14 CFR 23.574 - Metallic damage tolerance and fatigue evaluation of commuter category airplanes.

Code of Federal Regulations, 2011 CFR

2011-01-01

... evaluation of commuter category airplanes. 23.574 Section 23.574 Aeronautics and Space FEDERAL AVIATION... COMMUTER CATEGORY AIRPLANES Structure Fatigue Evaluation § 23.574 Metallic damage tolerance and fatigue evaluation of commuter category airplanes. For commuter category airplanes— (a) Metallic damage tolerance. An...

14 CFR 23.574 - Metallic damage tolerance and fatigue evaluation of commuter category airplanes.

Code of Federal Regulations, 2010 CFR

2010-01-01

... evaluation of commuter category airplanes. 23.574 Section 23.574 Aeronautics and Space FEDERAL AVIATION... COMMUTER CATEGORY AIRPLANES Structure Fatigue Evaluation § 23.574 Metallic damage tolerance and fatigue evaluation of commuter category airplanes. For commuter category airplanes— (a) Metallic damage tolerance. An...

Using surface impedance for calculating wakefields in flat geometry

DOE PAGES

Bane, Karl; Stupakov, Gennady

2015-03-18

Beginning with Maxwell's equations and assuming only that the wall interaction can be approximated by a surface impedance, we derive formulas for the generalized longitudinal and transverse impedance in flat geometry, from which the wakefields can also be obtained. From the generalized impedances, by taking the proper limits, we obtain the normal longitudinal, dipole, and quad impedances in flat geometry. These equations can be applied to any surface impedance, such as the known dc, ac, and anomalous skin models of wall resistance, a model of wall roughness, or one for a pipe with small, periodic corrugations. We show that, formore » the particular case of dc wall resistance, the longitudinal impedance obtained here agrees with a known result in the literature, a result that was derived from a very general formula by Henke and Napoly. As an example, we apply our results to representative beam and machine parameters in the undulator region of LCLS-II and estimate the impact of the transverse wakes on the machine performance.« less

Fundamental Study on Saving Energy for Electrified Railway System Applying High Temperature Superconductor Motor and Energy Storage System

NASA Astrophysics Data System (ADS)

Konishi, Takeshi; Nakamura, Taketsune; Amemiya, Naoyuki

Induction motor instead of dc one has been applied widely for dc electric rolling stock because of the advantage of its utility and efficiency. However, further improvement of motor characteristics will be required to realize environment-friendly dc railway system in the future. It is important to study more efficient machine applying dc electric rolling stock for next generation high performance system. On the other hand, the methods to reuse regenerative energy produced by motors effectively are also important. Therefore, we carried out fundamental study on saving energy for electrified railway system. For the first step, we introduced the energy storage system applying electric double-layer capacitors (EDLC), and its control system. And then, we tried to obtain the specification of high temperature superconductor induction/synchronous motor (HTS-ISM), which performance is similar with that of the conventional induction motors. Furthermore, we tried to evaluate an electrified railway system applying energy storage system and HTS-ISM based on simulation. We succeeded in showing the effectiveness of the introductions of energy storage system and HTS-ISM in DC electrified railway system.

Individual Public Transportation Accessibility is Positively Associated with Self-Reported Active Commuting.

PubMed

Djurhuus, Sune; Hansen, Henning Sten; Aadahl, Mette; Glümer, Charlotte

2014-01-01

Active commuters have lower risk of chronic disease. Understanding which of the, to some extent, modifiable characteristics of public transportation that facilitate its use is thus important in a public health perspective. The aim of the study was to examine the association between individual public transportation accessibility and self-reported active commuting, and whether the associations varied with commute distance, age, and gender. Twenty-eight thousand nine hundred twenty-eight commuters in The Capital Region of Denmark reported self-reported time spent either walking or cycling to work or study each day and the distance to work or study. Data were obtained from the Danish National Health Survey collected in February to April 2010. Individual accessibility by public transportation was calculated using a multi-modal network in a GIS. Multilevel logistic regression was used to analyze the association between accessibility, expressed as access area, and being an active commuter. Public transport accessibility area based on all stops within walking and cycling distance was positively associated with being an active commuter. Distance to work, age, and gender modified the associations. Residing within 10 km commute distance and in areas of high accessibility was associated with being an active commuter and meeting the recommendations of physical activity. For the respondents above 29 years, individual public transportation accessibility was positively associated with being an active commuter. Women having high accessibility had significantly higher odds of being an active commuter compared to having a low accessibility. For men, the associations were insignificant. This study extends the knowledge about the driving forces of using public transportation for commuting by examining the individual public transportation accessibility. Findings suggest that transportation accessibility supports active commuting and planning of improved public transit accessibility has thus a potential of providing health benefits to commuters.

Longitudinal associations between built environment characteristics and changes in active commuting.

PubMed

Yang, Lin; Griffin, Simon; Khaw, Kay-Tee; Wareham, Nick; Panter, Jenna

2017-05-17

Few studies have assessed the predictors of changes in commuting. This study investigated the associations between physical environmental characteristics and changes in active commuting. Adults from the population-based European Prospective Investigation into Cancer (EPIC)-Norfolk cohort self-reported commuting patterns in 2000 and 2007. Active commuters were defined as those who reported 'always' or 'usually' walking or cycling to work. Environmental attributes around the home and route were assessed using Geographical Information Systems. Associations between potential environmental predictors and uptake and maintenance of active commuting were modelled using logistic regression, adjusting for age, sex and BMI. Of the 2757 participants (62% female, median baseline age: 52, IQR: 50-56 years), most were passive commuters at baseline (76%, n = 2099) and did not change their usual commute mode over 7 years (82%, n = 2277). In multivariable regression models, participants living further from work were less likely to take up active commuting and those living in neighbourhoods with more streetlights were more likely to take up active commuting (both p < 0.05). Findings for maintenance were similar: participants living further from work (over 10 km, OR: 0.06; 95% CI: 0.25 to 0.13) and had a main or secondary road on route were more likely to maintain their active commuting (OR: 0.52; 95% CI: 0.28 to 0.98). Those living in neighbourhoods with greater density of employment locations were more likely to maintain their active commuting. Co-locating residential and employment centres as well as redesigning urban areas to improve safety for pedestrians and cyclists may encourage active commuting. Future evaluative studies should seek to assess the effects of redesigning the built environment on active commuting and physical activity.

Effect of Commuter Time on Emergency Medicine Residents.

PubMed

Sampson, Christopher; Borenstein, Marc

2018-01-12

Background The impact of resident work hours on resident well-being and patient safety has long been a controversial issue. Objectives What has not been considered in resident work hour limitations is whether resident commuting time has any impact on a resident's total work hours or well-being. Methods A self-administered electronic survey was distributed to emergency medicine residents in 2016. Results The survey response was 8% (569/6828). Commuter time was 30 minutes or less in 70%. Two residents reported a commuter time of 76 to 90 minutes and one resident had a commuter time of 91 to 105 minutes. None reported commuter times greater than 105 minutes. Of most concern was that 29.3% of the residents reported falling asleep while driving their car home from work. We found 12% of respondents reporting being involved in a car collision while commuting. For residents with commute times greater than one hour, 66% reported they had fallen asleep while driving. When asked their opinion on the effect of commute time, those with commute times greater than one hour (75% of residents) responded that it was detrimental. Conclusions While the majority of emergency medicine residents in this survey have commuter times of 30 minutes or less, there is a small population of residents with commuter times of 76 to 105 minutes. At times, residents whose commute is up to 105 minutes each way could be traveling a total of more than 3.5 hours for each round trip. Given that these residents often work 12-hour shifts, these extended commuter times may be having detrimental effects on their health and well-being.

Effect of Commuter Time on Emergency Medicine Residents

PubMed Central

Borenstein, Marc

2018-01-01

Background The impact of resident work hours on resident well-being and patient safety has long been a controversial issue. Objectives What has not been considered in resident work hour limitations is whether resident commuting time has any impact on a resident's total work hours or well-being. Methods A self-administered electronic survey was distributed to emergency medicine residents in 2016. Results The survey response was 8% (569/6828). Commuter time was 30 minutes or less in 70%. Two residents reported a commuter time of 76 to 90 minutes and one resident had a commuter time of 91 to 105 minutes. None reported commuter times greater than 105 minutes. Of most concern was that 29.3% of the residents reported falling asleep while driving their car home from work. We found 12% of respondents reporting being involved in a car collision while commuting. For residents with commute times greater than one hour, 66% reported they had fallen asleep while driving. When asked their opinion on the effect of commute time, those with commute times greater than one hour (75% of residents) responded that it was detrimental. Conclusions While the majority of emergency medicine residents in this survey have commuter times of 30 minutes or less, there is a small population of residents with commuter times of 76 to 105 minutes. At times, residents whose commute is up to 105 minutes each way could be traveling a total of more than 3.5 hours for each round trip. Given that these residents often work 12-hour shifts, these extended commuter times may be having detrimental effects on their health and well-being. PMID:29545979

20 CFR 617.22 - Approval of training.

Code of Federal Regulations, 2011 CFR

2011-04-01

... worker, either in the commuting area, as defined in § 617.3(k), or outside the commuting area in an area... reasonably accessible to the worker within the worker's commuting area at any governmental or private... precluding training outside the commuting area if none is available at the time within the worker's commuting...

20 CFR 617.22 - Approval of training.

Code of Federal Regulations, 2013 CFR

2013-04-01

... worker, either in the commuting area, as defined in § 617.3(k), or outside the commuting area in an area... reasonably accessible to the worker within the worker's commuting area at any governmental or private... precluding training outside the commuting area if none is available at the time within the worker's commuting...

20 CFR 617.22 - Approval of training.

Code of Federal Regulations, 2010 CFR

2010-04-01

... worker, either in the commuting area, as defined in § 617.3(k), or outside the commuting area in an area... reasonably accessible to the worker within the worker's commuting area at any governmental or private... precluding training outside the commuting area if none is available at the time within the worker's commuting...

20 CFR 617.22 - Approval of training.

Code of Federal Regulations, 2012 CFR

2012-04-01

... worker, either in the commuting area, as defined in § 617.3(k), or outside the commuting area in an area... reasonably accessible to the worker within the worker's commuting area at any governmental or private... precluding training outside the commuting area if none is available at the time within the worker's commuting...

20 CFR 617.22 - Approval of training.

Code of Federal Regulations, 2014 CFR

2014-04-01

... worker, either in the commuting area, as defined in § 617.3(k), or outside the commuting area in an area... reasonably accessible to the worker within the worker's commuting area at any governmental or private... precluding training outside the commuting area if none is available at the time within the worker's commuting...

Associations between patterns of active commuting and socioeconomic factors in women with fibromyalgia: the al-Ándalus project.

PubMed

Herrador-Colmenero, Manuel; Álvarez-Gallardo, Inmaculada C; Segura-Jiménez, Víctor; Estévez-López, Fernando; Soriano-Maldonado, Alberto; Ruiz-Montero, Pedro J; Tercedor, Pablo; Girela-Rejón, María José; Delgado-Fernández, Manuel; Chillón, Palma

2016-01-01

The aims of this study were to know whether active commuting behaviour differs between fibromyalgia patients and controls, and to test whether active commuting is associated with socioeconomic factors in this population. This cross-sectional study included 459 women with fibromyalgia (52.2 years) and 214 female control participants (51.3 years) from Andalusia (southern Spain). Participants reported patterns of active commuting and socioeconomic factors (civil status, accompaniment at home, living with, educational level, and current occupational and professional status). On the age group <51 years, women with fibromyalgia revealed a significant higher percentage of active commuting for the variable active worker commuters than control group (p<0.05). On the age group ≥51 years, control group displayed a significant higher percentage of active commuting for commuting to local shops, super-market and active commuters variables (all, p<0.05). Women with fibromyalgia who lived alone were more active commuters in comparison to either those living accompanied, or living with both partner and children, only partner and only children (all, p<0.05). The prevalence of active commuting was similar in women with fibromyalgia and controls aged <51 years. However, fibromyalgia participants aged ≥51 years displayed differences: fibromyalgia women who lived alone were more active commuters than those living accompanied; family demands were inversely associated with commuting patterns. Policies focused on reducing family demands for fibromyalgia patients (i.e. social help on housework, childcare or overprotection) might facilitate the inclusion of daily active behaviours.

75 FR 3462 - Claims of Confidentiality of Certain Chemical Identities Submitted under Section 8(e) of the...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-21

... identification, pass through a metal detector, and sign the EPA visitor log. All visitor bags are processed through an X-ray machine and subject to search. Visitors will be provided an EPA/DC badge that must be...

49 CFR 37.89 - Remanufacture of intercity and commuter rail cars and purchase or lease of remanufactured...

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 1 2012-10-01 2012-10-01 false Remanufacture of intercity and commuter rail cars and purchase or lease of remanufactured intercity and commuter rail cars. 37.89 Section 37.89... commuter rail cars and purchase or lease of remanufactured intercity and commuter rail cars. (a) This...

49 CFR 37.89 - Remanufacture of intercity and commuter rail cars and purchase or lease of remanufactured...

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 1 2013-10-01 2013-10-01 false Remanufacture of intercity and commuter rail cars and purchase or lease of remanufactured intercity and commuter rail cars. 37.89 Section 37.89... commuter rail cars and purchase or lease of remanufactured intercity and commuter rail cars. (a) This...

Commuter Chronicle: An Effort to Enhance Commuter Communication in a Traditional Residential Campus Environment.

ERIC Educational Resources Information Center

Henckler, Joyce D.

1982-01-01

In an effort to inform commuter students of services and programs on a regular basis, the University of Maine at Orono launched a campaign consisting of a newsletter and orientation sessions targeted directly at commuter students. The newsletter included topics of special interest to commuter students such as housing services, ridesharing, child…

Class 2 design update for the family of commuter airplanes

NASA Technical Reports Server (NTRS)

Creighton, Thomas R.; Hendrich, Louis J.

1987-01-01

This is the final report of seven on the design of a family of commuter airplanes. This design effort was performed in fulfillment of NASA/USRA grant NGT-8001. Its contents are as follows: (1) the class 1 baseline designs for the commuter airplane family; (2) a study of takeoff weight penalties imposed on the commuter family due to implementing commonality objectives; (3) component structural designs common to the commuter family; (4) details of the acquisition and operating economics of the commuter family, i.e., savings due to production commonality and handling qualities commonality are determined; (5) discussion of the selection of an advanced turboprop propulsion system for the family of commuter airplanes, and (6) a proposed design for an SSSA controller design to achieve similar handling for all airplanes. Final class 2 commuter airplane designs are also presented.

Commuting--a further stress factor for working people: evidence from the European Community. II. An empirical study.

PubMed

Costa, G; Pickup, L; Di Martino, V

1988-01-01

This report summarizes the main results of research promoted by the European Foundation for the Improvement of Living and Working Conditions, concerning the impact of commuting on the health and safety of workers. An empirical study, carried out among 1167 industrial Italian workers, shows that "commuters" (workers whose journey from home to work usually does not take less than 45 min in each direction) experienced a more stressed life-style than did "non commuters" (whose journey does not take more than 20 min). Commuting appears for many workers to be a necessity which is imposed by external factors, such as the housing market and job opportunities. Commuting is shown to interfere with patterns of everyday life by restricting free-time and reducing sleeping time. A majority of commuters use public transport mainly because of cost. Public transport commuters have problems due to more changes between modes, idle waiting times and delays leading to late arrival at work. Inside transport modes, commuters suffered discomfort as a result of overcrowding, microclimatic conditions, noise and vibrations. Commuters also reported higher psychological stress scores, more health complaints, essentially of psychosomatic nature, and greater absenteeism from work due to sickness. Commuting, in addition to shiftwork, further increases sleep problems, psychosomatic complaints and difficulties with family and social life. Women commuters were at a greater disadvantage than men, having more family difficulties, more travelling complaints and higher absenteeism.

Commuting by car: weight gain among physically active adults.

PubMed

Sugiyama, Takemi; Ding, Ding; Owen, Neville

2013-02-01

Prolonged sitting, including time spent sitting in cars, is detrimentally associated with health outcomes. This study examined whether commuting by car was associated with adults' weight gain over 4 years. Among 822 adult residents of Adelaide, Australia, weight change was ascertained from self-reported weight at baseline (2003-2004) and at follow-up (2007-2008). Using time spent for car commuting and work status at baseline, participants were categorized as non-car commuters, occasional car commuters, and daily car commuters. Multilevel linear regression (conducted in 2012) examined associations of weight change with car-commuting category, adjusting for potential confounding variables, for the whole sample, and among those who were physically inactive or active (≥150 minutes/week) in their leisure time. For the overall sample, adjusted mean weight gain (95% CI) over 4 years was 1.26 (0.64, 1.89) kg for non-car commuters; 1.53 (0.69, 2.37) kg for occasional car commuters; and 2.18 (1.44, 2.92) kg for daily car commuters (p for trend=0.090). Stratified analyses found a stronger association for those with sufficient leisure-time physical activity. For non-car commuters with sufficient leisure-time physical activity, the adjusted mean weight gain was 0.46 (-0.43, 1.35) kg, which was not significantly greater than 0. Over 4 years, those who used cars daily for commuting tended to gain more weight than those who did not commute by car. This relationship was pronounced among those who were physically active during leisure time. Reducing sedentary time may prevent weight gain among physically active adults. Copyright © 2013 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

Trade-offs between commuting time and health-related activities.

PubMed

Christian, Thomas J

2012-10-01

To further understand documented associations between obesity and urban sprawl, this research describes individuals' trade-offs between health-related activities and commuting time. A cross-section of 24,861 working-age individuals employed full-time and residing in urban counties is constructed from the American Time Use Survey (2003-2010). Data are analyzed using seemingly unrelated regressions to quantify health-related activity decreases in response to additional time spent commuting. Outcomes are total daily minutes spent in physical activity at a moderate or greater intensity, preparing food, eating meals with family, and sleeping. Commuting time is measured as all travel time between home and work and vice versa. The mean commuting time is 62 min daily, the median is 55 min, and 10.1% of workers commute 120 min or more. Spending an additional 60 min daily commuting above average is associated with a 6% decrease in aggregate health-related activities and spending an additional 120 min is associated with a 12% decrease. The greatest percentage of commuting time comes from sleeping time reductions (28-35%). Additionally, larger proportions of commuting time are taken from physical activity and food preparation relative to the mean commuting length: of 60 min spent commuting, 16.1% is taken from physical activity and 4.1% is taken from food preparation; of 120 min commuting, 20.3% is taken from physical activity and 5.6% is taken from food preparation. The results indicate that longer commutes are associated with behavioral patterns which over time may contribute to obesity and other poor health outcomes. These findings will assist both urban planners and researchers wishing to understand time constraints' impacts on health.

Active Commuting: Workplace Health Promotion for Improved Employee Well-Being and Organizational Behavior

PubMed Central

Page, Nadine C.; Nilsson, Viktor O.

2017-01-01

Objective: This paper describes a behavior change intervention that encourages active commuting using electrically assisted bikes (e-bikes) for health promotion in the workplace. This paper presents the preliminary findings of the intervention’s impact on improving employee well-being and organizational behavior, as an indicator of potential business success. Method: Employees of a UK-based organization participated in a workplace travel behavior change intervention and used e-bikes as an active commuting mode; this was a change to their usual passive commuting behavior. The purpose of the intervention was to develop employee well-being and organizational behavior for improved business success. We explored the personal benefits and organizational co-benefits of active commuting and compared these to a travel-as-usual group of employees who did not change their behavior and continued taking non-active commutes. Results: Employees who changed their behavior to active commuting reported more positive affect, better physical health and more productive organizational behavior outcomes compared with passive commuters. In addition, there was an interactive effect of commuting mode and commuting distance: a more frequent active commute was positively associated with more productive organizational behavior and stronger overall positive employee well-being whereas a longer passive commute was associated with poorer well-being, although there was no impact on organizational behavior. Conclusion: This research provides emerging evidence of the value of an innovative workplace health promotion initiative focused on active commuting in protecting and improving employee well-being and organizational behavior for stronger business performance. It considers the significant opportunities for organizations pursuing improved workforce well-being, both in terms of employee health, and for improved organizational behavior and business success. PMID:28119640

Active Commuting: Workplace Health Promotion for Improved Employee Well-Being and Organizational Behavior.

PubMed

Page, Nadine C; Nilsson, Viktor O

2016-01-01

Objective: This paper describes a behavior change intervention that encourages active commuting using electrically assisted bikes (e-bikes) for health promotion in the workplace. This paper presents the preliminary findings of the intervention's impact on improving employee well-being and organizational behavior, as an indicator of potential business success. Method: Employees of a UK-based organization participated in a workplace travel behavior change intervention and used e-bikes as an active commuting mode; this was a change to their usual passive commuting behavior. The purpose of the intervention was to develop employee well-being and organizational behavior for improved business success. We explored the personal benefits and organizational co-benefits of active commuting and compared these to a travel-as-usual group of employees who did not change their behavior and continued taking non-active commutes. Results: Employees who changed their behavior to active commuting reported more positive affect, better physical health and more productive organizational behavior outcomes compared with passive commuters. In addition, there was an interactive effect of commuting mode and commuting distance: a more frequent active commute was positively associated with more productive organizational behavior and stronger overall positive employee well-being whereas a longer passive commute was associated with poorer well-being, although there was no impact on organizational behavior. Conclusion: This research provides emerging evidence of the value of an innovative workplace health promotion initiative focused on active commuting in protecting and improving employee well-being and organizational behavior for stronger business performance. It considers the significant opportunities for organizations pursuing improved workforce well-being, both in terms of employee health, and for improved organizational behavior and business success.

Assessing Scientific Practices Using Machine-Learning Methods: How Closely Do They Match Clinical Interview Performance?

ERIC Educational Resources Information Center

Beggrow, Elizabeth P.; Ha, Minsu; Nehm, Ross H.; Pearl, Dennis; Boone, William J.

2014-01-01

The landscape of science education is being transformed by the new "Framework for Science Education" (National Research Council, "A framework for K-12 science education: practices, crosscutting concepts, and core ideas." The National Academies Press, Washington, DC, 2012), which emphasizes the centrality of scientific…

A Survey of Parallel Computing

DTIC Science & Technology

1988-07-01

Evaluating Two Massively Parallel Machines. Communications of the ACM .9, , , 176 BIBLIOGRAPHY 29, 8 (August), pp. 752-758. Gajski , D.D., Padua, D.A., Kuck...Computer Architecture, edited by Gajski , D. D., Milutinovic, V. M. Siegel, H. J. and Furht, B. P. IEEE Computer Society Press, Washington, D.C., pp. 387-407

Individual Public Transportation Accessibility is Positively Associated with Self-Reported Active Commuting

PubMed Central

Djurhuus, Sune; Hansen, Henning Sten; Aadahl, Mette; Glümer, Charlotte

2014-01-01

Background: Active commuters have lower risk of chronic disease. Understanding which of the, to some extent, modifiable characteristics of public transportation that facilitate its use is thus important in a public health perspective. The aim of the study was to examine the association between individual public transportation accessibility and self-reported active commuting, and whether the associations varied with commute distance, age, and gender. Methods: Twenty-eight thousand nine hundred twenty-eight commuters in The Capital Region of Denmark reported self-reported time spent either walking or cycling to work or study each day and the distance to work or study. Data were obtained from the Danish National Health Survey collected in February to April 2010. Individual accessibility by public transportation was calculated using a multi-modal network in a GIS. Multilevel logistic regression was used to analyze the association between accessibility, expressed as access area, and being an active commuter. Results: Public transport accessibility area based on all stops within walking and cycling distance was positively associated with being an active commuter. Distance to work, age, and gender modified the associations. Residing within 10 km commute distance and in areas of high accessibility was associated with being an active commuter and meeting the recommendations of physical activity. For the respondents above 29 years, individual public transportation accessibility was positively associated with being an active commuter. Women having high accessibility had significantly higher odds of being an active commuter compared to having a low accessibility. For men, the associations were insignificant. Conclusion: This study extends the knowledge about the driving forces of using public transportation for commuting by examining the individual public transportation accessibility. Findings suggest that transportation accessibility supports active commuting and planning of improved public transit accessibility has thus a potential of providing health benefits to commuters. PMID:25453030

The relationship between bicycle commuting and perceived stress: a cross-sectional study

PubMed Central

Avila-Palencia, Ione; de Nazelle, Audrey; Cole-Hunter, Tom; Donaire-Gonzalez, David; Jerrett, Michael; Rodriguez, Daniel A; Nieuwenhuijsen, Mark J

2017-01-01

Introduction Active commuting — walking and bicycling for travel to and/or from work or educational addresses — may facilitate daily, routine physical activity. Several studies have investigated the relationship between active commuting and commuting stress; however, there are no studies examining the relationship between solely bicycle commuting and perceived stress, or studies that account for environmental determinants of bicycle commuting and stress. The current study evaluated the relationship between bicycle commuting, among working or studying adults in a dense urban setting, and perceived stress. Methods A cross-sectional study was performed with 788 adults who regularly travelled to work or study locations (excluding those who only commuted on foot) in Barcelona, Spain. Participants responded to a comprehensive telephone survey concerning their travel behaviour from June 2011 through to May 2012. Participants were categorised as either bicycle commuters or non-bicycle commuters, and (based on the Perceived Stress Scale, PSS-4) as either stressed or non-stressed. Multivariate Poisson regression with robust variance models of stress status based on exposures with bicycle commuting were estimated and adjusted for potential confounders. Results Bicycle commuters had significantly lower risk of being stressed than non-bicycle commuters (Relative Risk; RR (95% CI)=0.73 (0.60 to 0.89), p=0.001). Bicycle commuters who bicycled 4 days per week (RR (95% CI)=0.42 (0.24 to 0.73), p=0.002) and those who bicycled 5 or more days per week (RR (95% CI)=0.57 (0.42 to 0.77), p<0.001) had lower risk of being stressed than those who bicycled less than 4 days. This relationship remained statistically significant after adjusting for individual and environmental confounders and when using different cut-offs of perceived stress. Conclusions Stress reduction may be an important consequence of routine bicycle use and should be considered by decision makers as another potential benefit of its promotion. PMID:28645948

Comparisons of personal exposure to PM2.5 and CO by different commuting modes in Beijing, China.

PubMed

Huang, Jing; Deng, Furong; Wu, Shaowei; Guo, Xinbiao

2012-05-15

Epidemiological studies have shown that commuting in traffic is associated with adverse health effects. It is vital to investigate commuters' exposure to traffic-related air pollutants before considering potential health risks. However, there are relatively few publications considering commuters' personal exposure in China. We carried out a field investigation measuring commuters' personal exposure to particulate matter ≤2.5 μm in aerodynamic diameter (PM(2.5)) and carbon monoxide (CO) by three commuting modes in Beijing. Both PM(2.5) and CO personal concentrations and whole trip exposures were compared among the three commuting modes. After controlling confounding factors, we found that taxi commuters were exposed to lower concentrations of PM(2.5) (31.64±20.77 μg/m(3)) compared with bus commuters (42.40±23.36 μg/m(3)) and cyclists (49.10±26.60 μg/m(3)). By contrast, CO personal concentrations were significantly higher when commuting by taxi (5.21±1.52 ppm) than by bus (2.41±0.99 ppm) and bicycle (1.90±0.55 ppm). However, when inhalation rates and trip duration were taken into consideration, cyclists experienced the highest whole trip exposures to both PM(2.5) and CO (p<0.05). We also found fixed site monitoring data were not appropriate surrogates for personal exposure while commuting, especially during traffic heavy times. PM(2.5) and CO personal concentrations were greatly influenced by the commuting mode. Furthermore, the highest whole trip exposures to PM(2.5) and CO which cyclists experienced indicates it is not preferable to commute by bicycle in a relatively high air polluted environment. Cyclists are possibly subject to greater health risks than other commuters. Thus further research needs to be conducted to investigate the health risks associated with cycling. Copyright © 2012 Elsevier B.V. All rights reserved.

Spatial heterogeneity in repeated measures of perceived stress among car commuters in Scania, Sweden.

PubMed

Mattisson, Kristoffer; Jakobsson, Kristina; Håkansson, Carita; Cromley, Ellen

2016-07-27

Long commutes by car are stressful. Most research studying health effects of commuting have summarized cross-sectional data for large regions. This study investigated whether the levels of stress and individual characteristics among 30-60 min car commuters were similar across different places within the county of Scania, Sweden, and if there were changes over time. The study population was drawn from a public health survey conducted in 2000, with follow-ups in 2005 and 2010. The study population was selected from the 8206 study participants that completed the questionnaire at all three time points. Commuting questions in the 2010 questionnaire assessed exposure concurrently for that year and retrospectively for 2000 and 2005. In total, 997 persons aged 18-65 and working 15-60 h/week had commuted by car 30-60 min at least at one time point. Geographically weighted proportions of stress among 30-60 min car commuters were calculated for each year and classified into geographically continuous groups based on Wards algorithm. Stress levels, sociodemographic characteristics and commuting characteristics were compared for areas with high and low stress in relation to the rest of the county. This novel methodology can be adapted to other study settings where individual-level data are available over time. Spatial heterogeneity in stress levels was observed and the locations of high and low stress areas changed over time. Local differences in stress among participants were only partly explained by sociodemographic characteristics. Stressed commuters in the high stress area in 2000 were more likely to maintain their commuting mode and time than those not stressed. Stressed commuters in the high stress area in 2000 were also more likely to have the same workplace location in 2010, while stressed commuters in the high stress area in 2010 were more likely to have the same residential location as in 2000. The relationship between commuting mode and time and stress is variable in place and time. Better understanding of commuting contexts such as congestion is needed in research on the health effects of commuting.

Commutability of control materials for external quality assessment of serum apolipoprotein A-I measurement.

PubMed

Zeng, Jie; Qi, Tianqi; Wang, Shu; Zhang, Tianjiao; Zhou, Weiyan; Zhao, Haijian; Ma, Rong; Zhang, Jiangtao; Yan, Ying; Dong, Jun; Zhang, Chuanbao; Chen, Wenxiang

2018-04-25

The aim of the current study was to evaluate the commutability of commercial control materials and human serum pools and to investigate the suitability of the materials for the external quality assessment (EQA) of serum apolipoprotein A-I (apo A-I) measurement. The Clinical and Laboratory Standards Institute (CLSI) EP14-A3 protocol was used for the commutability study. Apo A-I concentrations in two levels of commercial control materials used in EQA program, two fresh-frozen human serum pools (FSPs) and two frozen human serum pools prepared from residual clinical specimens (RSPs) were measured along with 50 individual samples using nine commercial assays. Measurement results of the 50 individual samples obtained with different assays were pairwise analyzed by Deming regression, and 95% prediction intervals (PIs) were calculated. The commutability of the processed materials was evaluated by comparing the measurement results of the materials with the limits of the PIs. The FSP-1 was commutable for all the 36 assay pairs, and FSP-2 was commutable for 30 pairs; RSP-1 and RSP-2 showed commutability for 27/36 and 22/36 assay pairs, respectively, whereas the two EQA materials were commutable only for 4/36 and 5/36 assay pairs, respectively. Non-commutability of the tested EQA materials has been observed among current apo A-I assays. EQA programs need either to take into account the commutability-related biases in the interpretation of the EQA results or to use more commutable materials. Frozen human serum pools were commutable for most of the assays.

Electromagnetic processes during phase commutation in field regulated reluctance machine

NASA Astrophysics Data System (ADS)

Shishkov, A. N.; Sychev, D. A.; Zemlyansky, A. A.; Krupnova, M. N.; Funk, T. A.; Ishmet'eva, V. D.

2018-03-01

The processes of currents switching in stator windings have been explained by the existence of the electromagnetic torque ripples in the electric drive with the field-regulated reluctance machine. The maximum value of ripples in the open loop control system for the six-phase machine can reach 20 percent from the developed electromagnetic torque. This method allows one to make calculation of ripple spike towards average torque developed by the electromotor for the different number of phases. Application of a trapezoidal form of current at six phases became the solution. In case of a less number of phases than six, a ripple spike considerably increases, which is inadmissible. On the other hand, increasing the number of phases tends to the increase of the semiconductor inverter external dimensions based on the inconspicuous decreasing of a ripple spike. The creation and usage of high-speed control loops of current (HCLC) have been recommended for a reduction of the electromagnetic torque’s ripple level, as well as the appliance of positive current feedback in switching phase currents. This decision allowed one to receive a mean value of the torque more than 10%, compared to system without change, to reduce greatly ripple spike of the electromagnetic torque. The possibility of the electric drive effective operation with FRRM in emergency operation has been shown.

EV drivetrain inverter with V/HZ optimization

DOEpatents

Gritter, David J.; O'Neil, Walter K.

1986-01-01

An inverter (34) which provides power to an A.C. machine (28) is controlled by a circuit (36) employing PWM control strategy whereby A.C. power is supplied to the machine at a preselectable frequency and preselectable voltage. This is accomplished by the technique of waveform notching in which the shapes of the notches are varied to determine the average energy content of the overall waveform. Through this arrangement, the operational efficiency of the A.C. machine is optimized. The control circuit includes a micro-computer which calculates optimized machine control data signals from various parametric inputs and during steady state load conditions, seeks a best V/HZ ratio to minimize battery current drawn (system losses) from a D.C. power source (32). In the preferred embodiment, the present invention is incorporated within an electric vehicle (10) employing a 144 VDC battery pack and a three-phase induction motor (18).

Rail commuting duration and passenger stress.

PubMed

Evans, Gary W; Wener, Richard E

2006-05-01

Over 100 million Americans commute to work every weekday. Little is known, however, about how this aspect of work, which may indeed be the most stressful aspect of the job for some, affects human health and well-being. The authors studied a sample of 208 male and female suburban rail commuters who took the train to Manhattan, New York. The greater the duration of the commute, the larger the magnitude of salivary cortisol elevations in reference to resting baseline levels, the less the commuter's persistence on a task at the end of the commute, and the greater the levels of perceived stress. These effects were not moderated by gender. Commuting stress is an important and largely overlooked aspect of environmental health. 2006 APA, all rights reserved

Does Commuting Affect Health?

PubMed

Künn-Nelen, Annemarie

2016-08-01

This paper analyzes the relation between commuting time and health in the UK. I focus on four different types of health outcomes: subjective health measures, objective health measures, health behavior, and healthcare utilization. Fixed effect models are estimated with British Household Panel Survey data. I find that whereas objective health and health behavior are barely affected by commuting time, subjective health measures are clearly lower for people who commute longer. A longer commuting time is, moreover, related to more visits to the general practitioner. Effects turn out to be more pronounced for women and for commuters driving a car. For women, commuting time is also negatively related to regular exercise and positively to calling in sick. Copyright © 2015 John Wiley & Sons, Ltd. Copyright © 2015 John Wiley & Sons, Ltd.

Fusion of multiple quadratic penalty function support vector machines (QPFSVM) for automated sea mine detection and classification

NASA Astrophysics Data System (ADS)

Dobeck, Gerald J.; Cobb, J. Tory

2002-08-01

The high-resolution sonar is one of the principal sensors used by the Navy to detect and classify sea mines in minehunting operations. For such sonar systems, substantial effort has been devoted to the development of automated detection and classification (D/C) algorithms. These have been spurred by several factors including (1) aids for operators to reduce work overload, (2) more optimal use of all available data, and (3) the introduction of unmanned minehunting systems. The environments where sea mines are typically laid (harbor areas, shipping lanes, and the littorals) give rise to many false alarms caused by natural, biologic, and man-made clutter. The objective of the automated D/C algorithms is to eliminate most of these false alarms while still maintaining a very high probability of mine detection and classification (PdPc). In recent years, the benefits of fusing the outputs of multiple D/C algorithms have been studied. We refer to this as Algorithm Fusion. The results have been remarkable, including reliable robustness to new environments. The Quadratic Penalty Function Support Vector Machine (QPFSVM) algorithm to aid in the automated detection and classification of sea mines is introduced in this paper. The QPFSVM algorithm is easy to train, simple to implement, and robust to feature space dimension. Outputs of successive SVM algorithms are cascaded in stages (fused) to improve the Probability of Classification (Pc) and reduce the number of false alarms. Even though our experience has been gained in the area of sea mine detection and classification, the principles described herein are general and can be applied to fusion of any D/C problem (e.g., automated medical diagnosis or automatic target recognition for ballistic missile defense).

A national survey of commuter rail policy.

DOT National Transportation Integrated Search

2015-09-22

The research project will provided a detailed survey of the history and effectiveness of commuter rail policy in the United States. It will examine the means by which commuter rail policy is locally modified and re-employed in subsequent commuter rai...

Associations between active commuting and physical activity in working adults: Cross-sectional results from the Commuting and Health in Cambridge study

PubMed Central

Yang, Lin; Panter, Jenna; Griffin, Simon J.; Ogilvie, David

2012-01-01

Objective To quantify the association between time spent in active commuting and in moderate to vigorous physical activity (MVPA) in a sample of working adults living in both urban and rural locations. Methods In 2009, participants in the Commuting and Health in Cambridge study were sent questionnaires enquiring about sociodemographic characteristics and weekly time spent in active commuting. They were also invited to wear an accelerometer for seven days. Accelerometer data were used to compute the time spent in MVPA. Multiple regression models were used to examine the association between time spent in active commuting and MVPA. Results 475 participants (70% female) provided valid data. On average, participants recorded 55 (SD: 23.02) minutes of MVPA per day. For women, reporting 150 or more minutes of active commuting per week was associated with an estimated 8.50 (95% CI: 1.75 to 51.26, p = 0.01) additional minutes of daily MVPA compared to those who reported no time in active commuting. No overall associations were found in men. Conclusions Promoting active commuting might be an important way of increasing levels of physical activity, particularly in women. Further research should assess whether increases in time spent in active commuting are associated with increases in physical activity. PMID:22964003

Exploring universal patterns in human home-work commuting from mobile phone data.

PubMed

Kung, Kevin S; Greco, Kael; Sobolevsky, Stanislav; Ratti, Carlo

2014-01-01

Home-work commuting has always attracted significant research attention because of its impact on human mobility. One of the key assumptions in this domain of study is the universal uniformity of commute times. However, a true comparison of commute patterns has often been hindered by the intrinsic differences in data collection methods, which make observation from different countries potentially biased and unreliable. In the present work, we approach this problem through the use of mobile phone call detail records (CDRs), which offers a consistent method for investigating mobility patterns in wholly different parts of the world. We apply our analysis to a broad range of datasets, at both the country (Portugal, Ivory Coast, and Saudi Arabia), and city (Boston) scale. Additionally, we compare these results with those obtained from vehicle GPS traces in Milan. While different regions have some unique commute time characteristics, we show that the home-work time distributions and average values within a single region are indeed largely independent of commute distance or country (Portugal, Ivory Coast, and Boston)-despite substantial spatial and infrastructural differences. Furthermore, our comparative analysis demonstrates that such distance-independence holds true only if we consider multimodal commute behaviors-as consistent with previous studies. In car-only (Milan GPS traces) and car-heavy (Saudi Arabia) commute datasets, we see that commute time is indeed influenced by commute distance. Finally, we put forth a testable hypothesis and suggest ways for future work to make more accurate and generalizable statements about human commute behaviors.

Accident report of Chicago Metra commuter train derailment on September 17, 2005.

DOT National Transportation Integrated Search

2015-10-01

On Saturday, September 17, 2005, Metra commuter train 504 was heading north from Joliet to Chicago on the Rock Island District Line operated by the Northeast Illinois Regional Commuter Railroad Corporation, which is the commuter rail system that serv...

Commuter choice primer : an employer's guide to implementing effective commuter choice programs

DOT National Transportation Integrated Search

2003-01-01

The Commuter Choice Primer is intended to be a concise, user-friendly reference guide for employers and transportation professionals to developing and implementing worksite commuter choice programs. It is available on-line in both HTML and PDF format...

Polycentrism, commuting, and residential location in the San Francisco Bay area.

PubMed

Cervero, R; Wu K--

1997-05-01

"The San Francisco Bay Area has taken on a distinct polycentric metropolitan form, with three tiers of hierarchical employment centers encircling downtown San Francisco.... In this paper it is found that polycentric development is associated with differentials in suburban and urban commute trip times: commute trips made by employees of suburban centers are shorter in duration than commute trips made by their counterparts in larger and denser urban centers. Differentials were even greater, however, with respect to commuting modal splits. Lower density, outlying employment centers averaged far higher rates of drive-alone automobile commuting and insignificant levels of transit commuting....The effects of housing availability and prices on the residential locational choices of those working both in urban and in suburban employment centers are also investigated...." excerpt

Commuting and Sleep: Results From the Hispanic Community Health Study/Study of Latinos Sueño Ancillary Study.

PubMed

Petrov, Megan E; Weng, Jia; Reid, Kathryn J; Wang, Rui; Ramos, Alberto R; Wallace, Douglas M; Alcantara, Carmela; Cai, Jianwen; Perreira, Krista; Espinoza Giacinto, Rebeca A; Zee, Phyllis C; Sotres-Alvarez, Daniela; Patel, Sanjay R

2018-03-01

Commute time is associated with reduced sleep time, but previous studies have relied on self-reported sleep assessment. The present study investigated the relationships between commute time for employment and objective sleep patterns among non-shift working U.S. Hispanic/Latino adults. From 2010 to 2013, Hispanic/Latino employed, non-shift-working adults (n=760, aged 18-64 years) from the Sueño study, ancillary to the Hispanic Community Health Study/Study of Latinos, reported their total daily commute time to and from work, completed questionnaires on sleep and other health behaviors, and wore wrist actigraphs to record sleep duration, continuity, and variability for 1 week. Survey linear regression models of the actigraphic and self-reported sleep measures regressed on categorized commute time (short: 1-44 minutes; moderate: 45-89 minutes; long: ≥90 minutes) were built adjusting for relevant covariates. For associations that suggested a linear relationship, continuous commute time was modeled as the exposure. Moderation effects by age, sex, income, and depressive symptoms also were explored. Commute time was linearly related to sleep duration on work days such that each additional hour of commute time conferred 15 minutes of sleep loss (p=0.01). Compared with short commutes, individuals with moderate commutes had greater sleep duration variability (p=0.04) and lower interdaily stability (p=0.046, a measure of sleep/wake schedule regularity). No significant associations were detected for self-reported sleep measures. Commute time is significantly associated with actigraphy-measured sleep duration and regularity among Hispanic/Latino adults. Interventions to shorten commute times should be evaluated to help improve sleep habits in this minority population. Copyright © 2017 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

Parental perceptions of barriers to active commuting to school in Spanish children and adolescents.

PubMed

Huertas-Delgado, Francisco Javier; Herrador-Colmenero, Manuel; Villa-González, Emilio; Aranda-Balboa, María Jesús; Cáceres, María Victoria; Mandic, Sandra; Chillón, Palma

2017-06-01

: Understanding parental barriers is crucial to promote active commuting to school since the parental perceptions influence how young people commute. This study examined parental barriers to active commuting to school among Spanish children and adolescents, and their association with their gender and the usual mode of commuting. Parents of children ( n = 628) and parents of adolescents ( n = 151) from Granada (Spain) completed a paper-based questionnaire about perceived parental barriers to active commuting to school and mode of commuting. Data were analyzed using the Chi-square test. Among Spanish parents, the most common barriers reported by parents of children were traffic volume and dangerous intersections, whereas the most frequent barriers reported by parents of adolescents were distance to school and dangerous intersections. Compared to parents of children, a greater proportion of parents of adolescents reported distance to school and crime and smaller proportion reported traffic volume as barriers to active commuting to school. Among parents of children, crime was a more commonly reported as a barrier by parents of girls. Although some barriers reported by parents of passive commuters were similar for children and adolescents (such as distance to school and absence of a policeman at crosswalks), other barriers were specific to parents of children. The main parental barriers to active commuting in children were traffic volume and dangerous intersections whereas for adolescents were distance and dangerous intersections. Among Spanish parents, parental barriers to active commuting are influenced by children's age, gender and mode of commuting to school. © The Author 2017. Published by Oxford University Press on behalf of the European Public Health Association. All rights reserved.

Towards a differentiated understanding of active travel behaviour: using social theory to explore everyday commuting.

PubMed

Guell, C; Panter, J; Jones, N R; Ogilvie, D

2012-07-01

Fostering physical activity is an established public health priority for the primary prevention of a variety of chronic diseases. One promising population approach is to seek to embed physical activity in everyday lives by promoting walking and cycling to and from work ('active commuting') as an alternative to driving. Predominantly quantitative epidemiological studies have investigated travel behaviours, their determinants and how they may be changed towards more active choices. This study aimed to depart from narrow behavioural approaches to travel and investigate the social context of commuting with qualitative social research methods. Within a social practice theory framework, we explored how people describe their commuting experiences and make commuting decisions, and how travel behaviour is embedded in and shaped by commuters' complex social worlds. Forty-nine semi-structured interviews and eighteen photo-elicitation interviews with accompanying field notes were conducted with a subset of the Commuting and Health in Cambridge study cohort, based in the UK. The findings are discussed in terms of three particularly pertinent facets of the commuting experience. Firstly, choice and decisions are shaped by the constantly changing and fluid nature of commuters' social worlds. Secondly, participants express ambiguities in relation to their reasoning, ambitions and identities as commuters. Finally, commuting needs to be understood as an embodied and emotional practice. With this in mind, we suggest that everyday decision-making in commuting requires the tactical negotiation of these complexities. This study can help to explain the limitations of more quantitative and static models and frameworks in predicting travel behaviour and identify future research directions. Copyright © 2012 Elsevier Ltd. All rights reserved.

Electrified Automotive Powertrain Architecture Using Composite DC–DC Converters

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chen, Hua; Kim, Hyeokjin; Erickson, Robert

In a hybrid or electric vehicle powertrain, a boost dc-dc converter enables reduction of the size of the electric machine and optimization of the battery system. Design of the powertrain boost converter is challenging because the converter must be rated at high peak power, while efficiency at medium-to-light load is critical for the vehicle system performance. By addressing only some of the loss mechanisms, previously proposed efficiency improvement approaches offer limited improvements in size, cost, and efficiency tradeoffs. This article shows how all dominant loss mechanisms in automotive powertrain applications can be mitigated using a new boost composite converter approach.more » In the composite dc-dc architecture, the loss mechanisms associated with indirect power conversion are addressed explicitly, resulting in fundamental efficiency improvements over wide ranges of operating conditions. Several composite converter topologies are presented and compared to state-of-the-art boost converter technologies. It is found that the selected boost composite converter results in a decrease in the total loss by a factor of 2-4 for typical drive cycles. Furthermore, the total system capacitor power rating and energy rating are substantially reduced, which implies potentials for significant reductions in system size and cost.« less

Electrified Automotive Powertrain Architecture Using Composite DC–DC Converters

DOE PAGES

Chen, Hua; Kim, Hyeokjin; Erickson, Robert; ...

2017-01-01

In a hybrid or electric vehicle powertrain, a boost dc-dc converter enables reduction of the size of the electric machine and optimization of the battery system. Design of the powertrain boost converter is challenging because the converter must be rated at high peak power, while efficiency at medium-to-light load is critical for the vehicle system performance. By addressing only some of the loss mechanisms, previously proposed efficiency improvement approaches offer limited improvements in size, cost, and efficiency tradeoffs. This article shows how all dominant loss mechanisms in automotive powertrain applications can be mitigated using a new boost composite converter approach.more » In the composite dc-dc architecture, the loss mechanisms associated with indirect power conversion are addressed explicitly, resulting in fundamental efficiency improvements over wide ranges of operating conditions. Several composite converter topologies are presented and compared to state-of-the-art boost converter technologies. It is found that the selected boost composite converter results in a decrease in the total loss by a factor of 2-4 for typical drive cycles. Furthermore, the total system capacitor power rating and energy rating are substantially reduced, which implies potentials for significant reductions in system size and cost.« less

14 CFR 135.398 - Commuter category airplanes performance operating limitations.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 3 2012-01-01 2012-01-01 false Commuter category airplanes performance... ON BOARD SUCH AIRCRAFT Airplane Performance Operating Limitations § 135.398 Commuter category airplanes performance operating limitations. (a) No person may operate a commuter category airplane unless...

14 CFR 135.398 - Commuter category airplanes performance operating limitations.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 3 2013-01-01 2013-01-01 false Commuter category airplanes performance... ON BOARD SUCH AIRCRAFT Airplane Performance Operating Limitations § 135.398 Commuter category airplanes performance operating limitations. (a) No person may operate a commuter category airplane unless...

14 CFR 135.398 - Commuter category airplanes performance operating limitations.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 3 2014-01-01 2014-01-01 false Commuter category airplanes performance... ON BOARD SUCH AIRCRAFT Airplane Performance Operating Limitations § 135.398 Commuter category airplanes performance operating limitations. (a) No person may operate a commuter category airplane unless...

Improved estimation of commuter waiting times using headway and commuter boarding information

NASA Astrophysics Data System (ADS)

Ramli, Muhamad Azfar; Jayaraman, Vasundhara; Kwek, Hyen Chee; Tan, Kian Heong; Lee Kee Khoon, Gary; Monterola, Christopher

2018-07-01

The average amount of waiting time spent by commuters is one of the key indicators of service quality for public bus operations. While actual measurements of actual waiting time is difficult to be done en masse, models of waiting time can be derived from bus headways and these models have been adopted by transport planners in monitoring and regulating service reliability of operators. However, these models are founded on several assumptions on the patterns of commuter arrival which may not be applicable for bus services that experience high demand and heavily fluctuating commuter patterns. Given the availability of granular data on commuter boarding from automated fare collection systems, we propose a new methodology to better estimate the average waiting time of commuters. The formulation is anchored and validated using a three-month dataset from ten selected bus routes in Singapore. Finally, we discuss how our new measure allows for minimization of commuter waiting time through schedule optimization.

The relationship between bicycle commuting and perceived stress: a cross-sectional study.

PubMed

Avila-Palencia, Ione; de Nazelle, Audrey; Cole-Hunter, Tom; Donaire-Gonzalez, David; Jerrett, Michael; Rodriguez, Daniel A; Nieuwenhuijsen, Mark J

2017-06-23

Active commuting - walking and bicycling for travel to and/or from work or educational addresses - may facilitate daily, routine physical activity. Several studies have investigated the relationship between active commuting and commuting stress; however, there are no studies examining the relationship between solely bicycle commuting and perceived stress, or studies that account for environmental determinants of bicycle commuting and stress. The current study evaluated the relationship between bicycle commuting, among working or studying adults in a dense urban setting, and perceived stress. A cross-sectional study was performed with 788 adults who regularly travelled to work or study locations (excluding those who only commuted on foot) in Barcelona, Spain. Participants responded to a comprehensive telephone survey concerning their travel behaviour from June 2011 through to May 2012. Participants were categorised as either bicycle commuters or non-bicycle commuters, and (based on the Perceived Stress Scale, PSS-4) as either stressed or non-stressed. Multivariate Poisson regression with robust variance models of stress status based on exposures with bicycle commuting were estimated and adjusted for potential confounders. Bicycle commuters had significantly lower risk of being stressed than non-bicycle commuters (Relative Risk; RR (95% CI)=0.73 (0.60 to 0.89), p=0.001). Bicycle commuters who bicycled 4 days per week (RR (95% CI)=0.42 (0.24 to 0.73), p=0.002) and those who bicycled 5 or more days per week (RR (95% CI)=0.57 (0.42 to 0.77), p<0.001) had lower risk of being stressed than those who bicycled less than 4 days. This relationship remained statistically significant after adjusting for individual and environmental confounders and when using different cut-offs of perceived stress. Stress reduction may be an important consequence of routine bicycle use and should be considered by decision makers as another potential benefit of its promotion. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Sensorless Control of Permanent Magnet Machine for NASA Flywheel Technology Development

NASA Technical Reports Server (NTRS)

Kenny, Barbara H.; Kascak, Peter E.

2002-01-01

This paper describes the position sensorless algorithms presently used in the motor control for the NASA "in-house" development work of the flywheel energy storage system. At zero and low speeds a signal injection technique, the self-sensing method, is used to determine rotor position. At higher speeds, an open loop estimate of the back EMF of the machine is made to determine the rotor position. At start up, the rotor is set to a known position by commanding dc into one of the phase windings. Experimental results up to 52,000 rpm are presented.

Non-Commutative Rational Yang-Baxter Maps

NASA Astrophysics Data System (ADS)

Doliwa, Adam

2014-03-01

Starting from multidimensional consistency of non-commutative lattice-modified Gel'fand-Dikii systems, we present the corresponding solutions of the functional (set-theoretic) Yang-Baxter equation, which are non-commutative versions of the maps arising from geometric crystals. Our approach works under additional condition of centrality of certain products of non-commuting variables. Then we apply such a restriction on the level of the Gel'fand-Dikii systems what allows to obtain non-autonomous (but with central non-autonomous factors) versions of the equations. In particular, we recover known non-commutative version of Hirota's lattice sine-Gordon equation, and we present an integrable non-commutative and non-autonomous lattice modified Boussinesq equation.

Commutating Permanent-Magnet Motors At Low Speed

NASA Technical Reports Server (NTRS)

Dolland, C.

1985-01-01

Circuit provides forced commutation during starting. Forced commutation circuit diverts current from inverter SCR's and turns SCR's off during commutation intervals. Silicon controlled rectifier in circuit unnecessary when switch S10 replaced by high-current, high-voltage transistor. At present, high-current, low-voltage device must suffice.

Evidence that dirty electricity is causing the worldwide epidemics of obesity and diabetes.

PubMed

Milham, Samuel

2014-01-01

The epidemics of obesity and diabetes most apparent in recent years had their origins with Thomas Edison's development of distributed electricity in New York City in 1882. His original direct current (DC) generators suffered serious commutator brush arcing which is a major source of high-frequency voltage transients (dirty electricity). From the onset of the electrical grid, electrified populations have been exposed to dirty electricity. Diesel generator sets are a major source of dirty electricity today and are used almost universally to electrify small islands and places unreachable by the conventional electric grid. This accounts for the fact that diabetes prevalence, fasting plasma glucose and obesity are highest on small islands and other places electrified by generator sets and lowest in places with low levels of electrification like sub-Saharan Africa and east and Southeast Asia.

Electric motor designs for attenuating torque disturbance in sensitive space mechanisms

NASA Astrophysics Data System (ADS)

Marks, David B.; Fink, Richard A.

2003-09-01

When a motion control system introduces unwanted torque jitter and motion anomalies into sensitive space flight optical or positioning mechanisms, the pointing accuracy, positioning capability, or scanning resolution of the mission suffers. Special motion control technology must be employed to provide attenuation of the harmful torque disturbances. Brushless DC (BLDC) Motors with low torque disturbance characteristics have been successfully used on such notable missions as the Hubble Space Telescope when conventional approaches to motor design would not work. Motor designs for low disturbance mechanisms can include two and three phase sinusoidal BLDC motors, BLDC motors without iron teeth, and sometimes skewed or non-integral slot designs for motors commutated with Hall effect devices. The principal components of motor torque disturbance, successful BLDC motor designs for attenuating disturbances, and design trade-offs for optimum performance are examined.

Influence of slot number and pole number in fault-tolerant brushless dc motors having unequal tooth widths

NASA Astrophysics Data System (ADS)

Ishak, D.; Zhu, Z. Q.; Howe, D.

2005-05-01

The electromagnetic performance of fault-tolerant three-phase permanent magnet brushless dc motors, in which the wound teeth are wider than the unwound teeth and their tooth tips span approximately one pole pitch and which have similar numbers of slots and poles, is investigated. It is shown that they have a more trapezoidal phase back-emf wave form, a higher torque capability, and a lower torque ripple than similar fault-tolerant machines with equal tooth widths. However, these benefits gradually diminish as the pole number is increased, due to the effect of interpole leakage flux.

The influence of travel attitudes, commute mode choice, and perceived neighborhood characteristics on physical activity.

PubMed

Morckel, Victoria; Terzano, Kathryn

2014-01-01

This study examines the relationships between physical activity, travel attitudes, commute mode choice, and perceived neighborhood characteristics. A recent study found that people who walk or bike during their commute exercise more outside of the commute than do people who commute by mass transit or car. The current study seeks to explain what might account for this relationship, using ANOVA models (Method) conducted on survey data from 3 cities. Perceived neighborhood characteristics and travel attitudes influence participants' reported physical activity levels both during the commute and outside of the commute. While the study does not establish causality, the results provide some support for the notion that policy makers interested in increasing physical activity levels should consider changing not only the physical environment, but also perceived neighborhood characteristics and travel attitudes.

Battery cars on superconducting magnetically levitated carriers: One commuting solution

NASA Technical Reports Server (NTRS)

Briggs, B. Mike; Oman, Henry

1992-01-01

Commuting to work in an urban-suburban metropolitan environment is becoming an unpleasant time-wasting process. We applied the technology of communication management to this commuting problem. Communication management is a system-engineering tool that produced today's efficient telephone network. The resulting best commuting option is magnetically levitated carriers of two-passenger, battery-powered, personally-owned local-travel cars. A commuter drives a car to a nearby station, selects a destination, drives on a waiting carrier, and enters an accelerating ramp. A central computer selects an optimum 100 miles-per-hour trunk route, considering existing and forecast traffic; assigns the commuter a travel slot, and subsequently orders switching-station actions. The commuter uses the expensive facilities for only a few minutes during each trip. The cost of travel could be less than 6 cents per mile.

75 FR 57770 - Certain New Chemicals; Receipt and Status Information

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-22

... identification, pass through a metal detector, and sign the EPA visitor log. All visitor bags are processed through an X-ray machine and subject to search. Visitors will be provided an EPA/DC badge that must be...- different substrates oil fatty acid, like plastics, alkyl diacid and metals, wood, alkyldiamines packaging...

Introduction to the Control of Electric Motors.

ERIC Educational Resources Information Center

Spencer, Frederick

The fundamentals of electric circuits and electric machines are presented in the text, with an emphasis on the practical operation rather than on mathematical analyses of theories involved. The material contained in the text includes the fundamentals of both D.C. and A.C. circuits together with the principles of magnetism and electro-magnetic…

Towards a differentiated understanding of active travel behaviour: Using social theory to explore everyday commuting

PubMed Central

Guell, C.; Panter, J.; Jones, N.R.; Ogilvie, D.

2012-01-01

Fostering physical activity is an established public health priority for the primary prevention of a variety of chronic diseases. One promising population approach is to seek to embed physical activity in everyday lives by promoting walking and cycling to and from work (‘active commuting’) as an alternative to driving. Predominantly quantitative epidemiological studies have investigated travel behaviours, their determinants and how they may be changed towards more active choices. This study aimed to depart from narrow behavioural approaches to travel and investigate the social context of commuting with qualitative social research methods. Within a social practice theory framework, we explored how people describe their commuting experiences and make commuting decisions, and how travel behaviour is embedded in and shaped by commuters' complex social worlds. Forty-nine semi-structured interviews and eighteen photo-elicitation interviews with accompanying field notes were conducted with a subset of the Commuting and Health in Cambridge study cohort, based in the UK. The findings are discussed in terms of three particularly pertinent facets of the commuting experience. Firstly, choice and decisions are shaped by the constantly changing and fluid nature of commuters' social worlds. Secondly, participants express ambiguities in relation to their reasoning, ambitions and identities as commuters. Finally, commuting needs to be understood as an embodied and emotional practice. With this in mind, we suggest that everyday decision-making in commuting requires the tactical negotiation of these complexities. This study can help to explain the limitations of more quantitative and static models and frameworks in predicting travel behaviour and identify future research directions. PMID:22486840

78 FR 75483 - Federal Travel Regulation (FTR); Relocation Allowances; Commuted Rate

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-12

... Allowances; Commuted Rate AGENCY: Office of Governmentwide Policy (OGP), U.S. General Services Administration (GSA). ACTION: Final rule. SUMMARY: The GSA, OGP, is providing a workable commuted rate to be used by.... 5724(c) requires that GSA maintain a commuted rate incorporating all aspects of household goods...

20 CFR 631.65 - Special provisions for CAETA and DDP.

Code of Federal Regulations, 2012 CFR

2012-04-01

... job search outside the commuting area under CAETA. Allowances for job search outside the commuting... worker cannot reasonably be expected to secure suitable employment within the commuting area in which the... secure suitable employment within the commuting area in which the dislocated worker resides shall be...

20 CFR 631.65 - Special provisions for CAETA and DDP.

Code of Federal Regulations, 2011 CFR

2011-04-01

... job search outside the commuting area under CAETA. Allowances for job search outside the commuting... worker cannot reasonably be expected to secure suitable employment within the commuting area in which the... secure suitable employment within the commuting area in which the dislocated worker resides shall be...

20 CFR 631.65 - Special provisions for CAETA and DDP.

Code of Federal Regulations, 2010 CFR

2010-04-01

... job search outside the commuting area under CAETA. Allowances for job search outside the commuting... worker cannot reasonably be expected to secure suitable employment within the commuting area in which the... secure suitable employment within the commuting area in which the dislocated worker resides shall be...

Commuter Family Relationships: Alive and Thriving.

ERIC Educational Resources Information Center

Johnson, Sharon Ervin

This study examined the impact that commuting, as part of a professional career lifestyle, has on family relationships. One hundred commuting couples participated in a paper and pencil survey. They responded to questions about coping as a family; dealing with the complications of children; keeping their relationship healthy; and commuting as a…

Model Predictive Control of A Matrix-Converter Based Solid State Transformer for Utility Grid Interaction

DOE Office of Scientific and Technical Information (OSTI.GOV)

Xue, Yaosuo

The matrix converter solid state transformer (MC-SST), formed from the back-to-back connection of two three-to-single-phase matrix converters, is studied for use in the interconnection of two ac grids. The matrix converter topology provides a light weight and low volume single-stage bidirectional ac-ac power conversion without the need for a dc link. Thus, the lifetime limitations of dc-bus storage capacitors are avoided. However, space vector modulation of this type of MC-SST requires to compute vectors for each of the two MCs, which must be carefully coordinated to avoid commutation failure. An additional controller is also required to control power exchange betweenmore » the two ac grids. In this paper, model predictive control (MPC) is proposed for an MC-SST connecting two different ac power grids. The proposed MPC predicts the circuit variables based on the discrete model of MC-SST system and the cost function is formulated so that the optimal switch vector for the next sample period is selected, thereby generating the required grid currents for the SST. Simulation and experimental studies are carried out to demonstrate the effectiveness and simplicity of the proposed MPC for such MC-SST-based grid interfacing systems.« less

A Qualitative Model of Human Interaction with Complex Dynamic Systems

NASA Technical Reports Server (NTRS)

Hess, Ronald A.

1987-01-01

A qualitative model describing human interaction with complex dynamic systems is developed. The model is hierarchical in nature and consists of three parts: a behavior generator, an internal model, and a sensory information processor. The behavior generator is responsible for action decomposition, turning higher level goals or missions into physical action at the human-machine interface. The internal model is an internal representation of the environment which the human is assumed to possess and is divided into four submodel categories. The sensory information processor is responsible for sensory composition. All three parts of the model act in consort to allow anticipatory behavior on the part of the human in goal-directed interaction with dynamic systems. Human workload and error are interpreted in this framework, and the familiar example of an automobile commute is used to illustrate the nature of the activity in the three model elements. Finally, with the qualitative model as a guide, verbal protocols from a manned simulation study of a helicopter instrument landing task are analyzed with particular emphasis on the effect of automation on human-machine performance.

A qualitative model of human interaction with complex dynamic systems

NASA Technical Reports Server (NTRS)

Hess, Ronald A.

1987-01-01

A qualitative model describing human interaction with complex dynamic systems is developed. The model is hierarchical in nature and consists of three parts: a behavior generator, an internal model, and a sensory information processor. The behavior generator is responsible for action decomposition, turning higher level goals or missions into physical action at the human-machine interface. The internal model is an internal representation of the environment which the human is assumed to possess and is divided into four submodel categories. The sensory information processor is responsible for sensory composition. All three parts of the model act in consort to allow anticipatory behavior on the part of the human in goal-directed interaction with dynamic systems. Human workload and error are interpreted in this framework, and the familiar example of an automobile commute is used to illustrate the nature of the activity in the three model elements. Finally, with the qualitative model as a guide, verbal protocols from a manned simulation study of a helicopter instrument landing task are analyzed with particular emphasis on the effect of automation on human-machine performance.

Mass Commuting and Influenza Vaccination Prevalence in New York City: Protection in a Mixing Environment

PubMed Central

Levine, Burton; Wilcosky, Tim; Wagener, Diane; Cooley, Phillip

2010-01-01

Objective Assess influenza vaccination among commuters using mass transit in New York City (NYC). Methods We used the 2006 NYC Community Health Survey (CHS) to analyze the prevalence of influenza immunization by commuting behaviors and to understand what socioeconomic and geographic factors may explain any differences found. Results Vaccination prevalence is significantly lower for New Yorkers who commute on public transportation compared to other New Yorkers. This difference is largely attenuated after adjusting for socio-demographic characteristics and neighborhood of residence. Conclusions The analysis identified a low prevalence of immunization among commuters, and given the transmissibility in that setting, targeting commuters for vaccination campaigns may impede influenza spread. PMID:21218159

Perfect commuting-operator strategies for linear system games

NASA Astrophysics Data System (ADS)

Cleve, Richard; Liu, Li; Slofstra, William

2017-01-01

Linear system games are a generalization of Mermin's magic square game introduced by Cleve and Mittal. They show that perfect strategies for linear system games in the tensor-product model of entanglement correspond to finite-dimensional operator solutions of a certain set of non-commutative equations. We investigate linear system games in the commuting-operator model of entanglement, where Alice and Bob's measurement operators act on a joint Hilbert space, and Alice's operators must commute with Bob's operators. We show that perfect strategies in this model correspond to possibly infinite-dimensional operator solutions of the non-commutative equations. The proof is based around a finitely presented group associated with the linear system which arises from the non-commutative equations.

Effects of urban growth controls on intercity commuting.

PubMed

Ogura, Laudo M

2010-01-01

This paper presents an empirical study of the effects of urban growth controls on the intercity commuting of workers. Growth controls (land use regulations that attempt to restrict population growth and urban sprawl) have increased housing prices and diverted population growth to uncontrolled cities. It has been suggested that resulting changes in local labour supply might stimulate intercity commuting from uncontrolled to controlled cities. To test this hypothesis, a gravity model of commuting flows between places in California is estimated using alternative econometric methods (OLS, Heckman selection and count-data). The possibility of spatial dependence in commuting flows is also taken into consideration. Results suggest larger commuting flows to destination places that restrict residential growth.

Happiness and Satisfaction with Work Commute.

PubMed

Olsson, Lars E; Gärling, Tommy; Ettema, Dick; Friman, Margareta; Fujii, Satoshi

2013-03-01

Research suggests that for many people happiness is being able to make the routines of everyday life work, such that positive feelings dominate over negative feelings resulting from daily hassles. In line with this, a survey of work commuters in the three largest urban areas of Sweden show that satisfaction with the work commute contributes to overall happiness. It is also found that feelings during the commutes are predominantly positive or neutral. Possible explanatory factors include desirable physical exercise from walking and biking, as well as that short commutes provide a buffer between the work and private spheres. For longer work commutes, social and entertainment activities either increase positive affects or counteract stress and boredom. Satisfaction with being employed in a recession may also spill over to positive experiences of work commutes. ELECTRONIC SUPPLEMENTARY MATERIAL: The online version of this article (doi:10.1007/s11205-012-0003-2) contains supplementary material, which is available to authorized users.

20 CFR 656.3 - Definitions, for purposes of this part, of terms used in this part.

Code of Federal Regulations, 2014 CFR

2014-04-01

... normal commuting distance of the place (address) of intended employment. There is no rigid measure of distance which constitutes a normal commuting distance or normal commuting area, because there may be widely varying factual circumstances among different areas (e.g., normal commuting distances might be 20...

20 CFR 656.3 - Definitions, for purposes of this part, of terms used in this part.

Code of Federal Regulations, 2012 CFR

2012-04-01

... normal commuting distance of the place (address) of intended employment. There is no rigid measure of distance which constitutes a normal commuting distance or normal commuting area, because there may be widely varying factual circumstances among different areas (e.g., normal commuting distances might be 20...

20 CFR 656.3 - Definitions, for purposes of this part, of terms used in this part.

Code of Federal Regulations, 2013 CFR

2013-04-01

... normal commuting distance of the place (address) of intended employment. There is no rigid measure of distance which constitutes a normal commuting distance or normal commuting area, because there may be widely varying factual circumstances among different areas (e.g., normal commuting distances might be 20...

8 CFR 211.5 - Alien commuters.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 8 Aliens and Nationality 1 2013-01-01 2013-01-01 false Alien commuters. 211.5 Section 211.5 Aliens...: IMMIGRANTS; WAIVERS § 211.5 Alien commuters. (a) General. An alien lawfully admitted for permanent residence.... An alien commuter engaged in seasonal work will be presumed to have taken up residence in the United...

8 CFR 211.5 - Alien commuters.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 8 Aliens and Nationality 1 2010-01-01 2010-01-01 false Alien commuters. 211.5 Section 211.5 Aliens...: IMMIGRANTS; WAIVERS § 211.5 Alien commuters. (a) General. An alien lawfully admitted for permanent residence.... An alien commuter engaged in seasonal work will be presumed to have taken up residence in the United...

20 CFR 704.102 - Commutation of payments to aliens and nonresidents.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 20 Employees' Benefits 4 2014-04-01 2014-04-01 false Commutation of payments to aliens and... FOR LHWCA EXTENSIONS Defense Base Act § 704.102 Commutation of payments to aliens and nonresidents. Authority to commute payments to aliens and nonnationals who are not residents of the United States and...

20 CFR 704.102 - Commutation of payments to aliens and nonresidents.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Commutation of payments to aliens and... LHWCA EXTENSIONS Defense Base Act § 704.102 Commutation of payments to aliens and nonresidents. Authority to commute payments to aliens and nonnationals who are not residents of the United States and...

8 CFR 211.5 - Alien commuters.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 8 Aliens and Nationality 1 2011-01-01 2011-01-01 false Alien commuters. 211.5 Section 211.5 Aliens...: IMMIGRANTS; WAIVERS § 211.5 Alien commuters. (a) General. An alien lawfully admitted for permanent residence.... An alien commuter engaged in seasonal work will be presumed to have taken up residence in the United...

8 CFR 211.5 - Alien commuters.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 8 Aliens and Nationality 1 2014-01-01 2014-01-01 false Alien commuters. 211.5 Section 211.5 Aliens...: IMMIGRANTS; WAIVERS § 211.5 Alien commuters. (a) General. An alien lawfully admitted for permanent residence.... An alien commuter engaged in seasonal work will be presumed to have taken up residence in the United...

8 CFR 211.5 - Alien commuters.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 8 Aliens and Nationality 1 2012-01-01 2012-01-01 false Alien commuters. 211.5 Section 211.5 Aliens...: IMMIGRANTS; WAIVERS § 211.5 Alien commuters. (a) General. An alien lawfully admitted for permanent residence.... An alien commuter engaged in seasonal work will be presumed to have taken up residence in the United...

20 CFR 704.102 - Commutation of payments to aliens and nonresidents.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 20 Employees' Benefits 4 2012-04-01 2012-04-01 false Commutation of payments to aliens and... FOR LHWCA EXTENSIONS Defense Base Act § 704.102 Commutation of payments to aliens and nonresidents. Authority to commute payments to aliens and nonnationals who are not residents of the United States and...

20 CFR 704.102 - Commutation of payments to aliens and nonresidents.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 20 Employees' Benefits 4 2013-04-01 2013-04-01 false Commutation of payments to aliens and... FOR LHWCA EXTENSIONS Defense Base Act § 704.102 Commutation of payments to aliens and nonresidents. Authority to commute payments to aliens and nonnationals who are not residents of the United States and...

20 CFR 704.102 - Commutation of payments to aliens and nonresidents.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 20 Employees' Benefits 3 2011-04-01 2011-04-01 false Commutation of payments to aliens and... FOR LHWCA EXTENSIONS Defense Base Act § 704.102 Commutation of payments to aliens and nonresidents. Authority to commute payments to aliens and nonnationals who are not residents of the United States and...

77 FR 72432 - Application of Boutique Air, Inc. for Commuter Air Carrier Authority

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-05

... Boutique Air, Inc. for Commuter Air Carrier Authority AGENCY: Department of Transportation. ACTION: Notice... interested persons to show cause why it should not issue an order finding Boutique Air, Inc., fit, willing, and able, and awarding it commuter air carrier authority to conduct scheduled commuter service. DATES...

26 CFR 1.46-11 - Commuter highway vehicles.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 26 Internal Revenue 1 2011-04-01 2009-04-01 true Commuter highway vehicles. 1.46-11 Section 1.46... Rules for Computing Credit for Investment in Certain Depreciable Property § 1.46-11 Commuter highway... investment under section 46(c)(1) for a qualifying commuter highway vehicle is 100 percent. A qualifying...

26 CFR 1.46-11 - Commuter highway vehicles.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 26 Internal Revenue 1 2010-04-01 2010-04-01 true Commuter highway vehicles. 1.46-11 Section 1.46... Rules for Computing Credit for Investment in Certain Depreciable Property § 1.46-11 Commuter highway... investment under section 46(c)(1) for a qualifying commuter highway vehicle is 100 percent. A qualifying...

26 CFR 1.46-11 - Commuter highway vehicles.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 26 Internal Revenue 1 2014-04-01 2013-04-01 true Commuter highway vehicles. 1.46-11 Section 1.46... Rules for Computing Credit for Investment in Certain Depreciable Property § 1.46-11 Commuter highway... investment under section 46(c)(1) for a qualifying commuter highway vehicle is 100 percent. A qualifying...

Employees' Perceptions of Cycle Commuting: A Qualitative Study

ERIC Educational Resources Information Center

van Bekkum, Jennifer E.; Williams, Joanne M.; Morris, Paul Graham

2011-01-01

Purpose: This study aims to provide an in-depth individual level understanding of the psychological factors that affect cycle commuting. Design/methodology/approach: A total of 15 participants (eight cycle commuters and seven potential cycle commuters) from a "cycle-friendly" employer based in a Scottish city took part in the study.…

The Development of an Orientation Brochure for Commuter Students at Mount Vernon Nazarene College.

ERIC Educational Resources Information Center

Bolender, Ronald

This study examined the necessary elements for the development of a student orientation brochure for commuter students at Mount Vernon Nazarene College in Mount Vernon, Ohio. It reviewed nontraditional and commuter student literature and 10 commuter student brochures and orientation materials from other institutions. The orientation brochure that…

Fostering Formal Commutativity Knowledge with Approximate Arithmetic

PubMed Central

Hansen, Sonja Maria; Haider, Hilde; Eichler, Alexandra; Godau, Claudia; Frensch, Peter A.; Gaschler, Robert

2015-01-01

How can we enhance the understanding of abstract mathematical principles in elementary school? Different studies found out that nonsymbolic estimation could foster subsequent exact number processing and simple arithmetic. Taking the commutativity principle as a test case, we investigated if the approximate calculation of symbolic commutative quantities can also alter the access to procedural and conceptual knowledge of a more abstract arithmetic principle. Experiment 1 tested first graders who had not been instructed about commutativity in school yet. Approximate calculation with symbolic quantities positively influenced the use of commutativity-based shortcuts in formal arithmetic. We replicated this finding with older first graders (Experiment 2) and third graders (Experiment 3). Despite the positive effect of approximation on the spontaneous application of commutativity-based shortcuts in arithmetic problems, we found no comparable impact on the application of conceptual knowledge of the commutativity principle. Overall, our results show that the usage of a specific arithmetic principle can benefit from approximation. However, the findings also suggest that the correct use of certain procedures does not always imply conceptual understanding. Rather, the conceptual understanding of commutativity seems to lag behind procedural proficiency during elementary school. PMID:26560311

Exposure to carbon monoxide, fine particle mass, and ultrafine particle number in Jakarta, Indonesia: effect of commute mode.

PubMed

Both, Adam F; Westerdahl, Dane; Fruin, Scott; Haryanto, Budi; Marshall, Julian D

2013-01-15

We measured real-time exposure to PM(2.5), ultrafine PM (particle number) and carbon monoxide (CO) for commuting workers school children, and traffic police, in Jakarta, Indonesia. In total, we measured exposures for 36 individuals covering 93 days. Commuters in private cars experienced mean (st dev) exposures of 22 (9.4) ppm CO, 91 (38) μg/m(3)PM(2.5), and 290 (150)×10(3) particles cm(-3). Mean concentrations were higher in public transport than in private cars for PM(2.5) (difference in means: 22%) and particle counts (54%), but not CO, likely reflecting in-vehicle particle losses in private cars owing to air-conditioning. However, average commute times were longer for private car commuters than public transport commuters (in our sample, 24% longer: 3.0 vs. 2.3 h per day). Commute and traffic-related exposures experienced by Jakarta residents are among the highest in the world, owing to high on-road concentrations and multi-hour commutes. Copyright © 2012 Elsevier B.V. All rights reserved.

Making almost commuting matrices commute

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hastings, Matthew B

Suppose two Hermitian matrices A, B almost commute ({parallel}[A,B]{parallel} {<=} {delta}). Are they close to a commuting pair of Hermitian matrices, A', B', with {parallel}A-A'{parallel},{parallel}B-B'{parallel} {<=} {epsilon}? A theorem of H. Lin shows that this is uniformly true, in that for every {epsilon} > 0 there exists a {delta} > 0, independent of the size N of the matrices, for which almost commuting implies being close to a commuting pair. However, this theorem does not specifiy how {delta} depends on {epsilon}. We give uniform bounds relating {delta} and {epsilon}. The proof is constructive, giving an explicit algorithm to construct A'more » and B'. We provide tighter bounds in the case of block tridiagonal and tridiagnonal matrices. Within the context of quantum measurement, this implies an algorithm to construct a basis in which we can make a projective measurement that approximately measures two approximately commuting operators simultaneously. Finally, we comment briefly on the case of approximately measuring three or more approximately commuting operators using POVMs (positive operator-valued measures) instead of projective measurements.« less

Neighborhood educational disparities in active commuting among women: the effect of distance between the place of residence and the place of work/study (an ACTI-Cités study).

PubMed

Perchoux, Camille; Nazare, Julie-Anne; Benmarhnia, Tarik; Salze, Paul; Feuillet, Thierry; Hercberg, Serge; Hess, Franck; Menai, Mehdi; Weber, Christiane; Charreire, Hélène; Enaux, Christophe; Oppert, Jean-Michel; Simon, Chantal

2017-06-12

Active transportation has been associated with favorable health outcomes. Previous research highlighted the influence of neighborhood educational level on active transportation. However, little is known regarding the effect of commuting distance on social disparities in active commuting. In this regard, women have been poorly studied. The objective of this paper was to evaluate the relationship between neighborhood educational level and active commuting, and to assess whether the commuting distance modifies this relationship in adult women. This cross-sectional study is based on a subsample of women from the Nutrinet-Santé web-cohort (N = 1169). Binomial, log-binomial and negative binomial regressions were used to assess the associations between neighborhood education level and (i) the likelihood of reporting any active commuting time, and (ii) the share of commuting time made by active transportation modes. Potential effect measure modification of distance to work on the previous associations was assessed both on the additive and the multiplicative scales. Neighborhood education level was positively associated with the probability of reporting any active commuting time (relative risk = 1.774; p < 0.05) and the share of commuting time spent active (relative risk = 1.423; p < 0.05). The impact of neighborhood education was greater at long distances to work for both outcomes. Our results suggest that neighborhood educational disparities in active commuting tend to increase with commuting distance among women. Further research is needed to provide geographically driven guidance for health promotion intervention aiming at reducing disparities in active transportation among socioeconomic groups.

Walking and cycling for commuting, leisure and errands: relations with individual characteristics and leisure-time physical activity in a cross-sectional survey (the ACTI-Cités project).

PubMed

Menai, Mehdi; Charreire, Hélène; Feuillet, Thierry; Salze, Paul; Weber, Christiane; Enaux, Christophe; Andreeva, Valentina A; Hercberg, Serge; Nazare, Julie-Anne; Perchoux, Camille; Simon, Chantal; Oppert, Jean-Michel

2015-12-09

Increasing active transport behavior (walking, cycling) throughout the life-course is a key element of physical activity promotion for health. There is, however, a need to better understand the correlates of specific domains of walking and cycling to identify more precisely at-risk populations for public health interventions. In addition, current knowledge of interactions between domains of walking and cycling remains limited. We assessed past-month self-reported time spent walking and cycling in three specific domains (commuting, leisure and errands) in 39,295 French adult participants (76.5% women) of the on-going NutriNet Santé web-cohort. Multivariate logistic regression models were used to investigate the associations with socio-demographic and physical activity correlates. Having a transit pass was strongly positively associated with walking for commuting and for errands but was unrelated to walking for leisure or to all domains of cycling. Having a parking space at work was strongly negatively associated with walking for commuting and cycling for commuting. BMI was negatively associated with both walking for leisure and errands, and with the three domains of cycling. Leisure-time physical activity was negatively associated with walking for commuting but was positively associated with the two other domains of walking and with cycling (three domains). Walking for commuting was positively associated with the other domains of walking; cycling for commuting was also positively associated with the other domains of cycling. Walking for commuting was not associated with cycling for commuting. In adults walking and cycling socio-demographic and physical activity correlates differ by domain (commuting, leisure and errands). Better knowledge of relationships between domains should help to develop interventions focusing not only the right population, but also the right behavior.

Criterion distances and environmental correlates of active commuting to school in children

PubMed Central

2011-01-01

Background Active commuting to school can contribute to daily physical activity levels in children. Insight into the determinants of active commuting is needed, to promote such behavior in children living within a feasible commuting distance from school. This study determined feasible distances for walking and cycling to school (criterion distances) in 11- to 12-year-old Belgian children. For children living within these criterion distances from school, the correlation between parental perceptions of the environment, the number of motorized vehicles per family and the commuting mode (active/passive) to school was investigated. Methods Parents (n = 696) were contacted through 44 randomly selected classes of the final year (sixth grade) in elementary schools in East- and West-Flanders. Parental environmental perceptions were obtained using the parent version of Neighborhood Environment Walkability Scale for Youth (NEWS-Y). Information about active commuting to school was obtained using a self-reported questionnaire for parents. Distances from the children's home to school were objectively measured with Routenet online route planner. Criterion distances were set at the distance in which at least 85% of the active commuters lived. After the determination of these criterion distances, multilevel analyses were conducted to determine correlates of active commuting to school within these distances. Results Almost sixty percent (59.3%) of the total sample commuted actively to school. Criterion distances were set at 1.5 kilometers for walking and 3.0 kilometers for cycling. In the range of 2.01 - 2.50 kilometers household distance from school, the number of passive commuters exceeded the number of active commuters. For children who were living less than 3.0 kilometers away from school, only perceived accessibility by the parents was positively associated with active commuting to school. Within the group of active commuters, a longer distance to school was associated with more cycling to school compared to walking to school. Conclusions Household distance from school is an important correlate of transport mode to school in children. Interventions to promote active commuting in 11-12 year olds should be focusing on children who are living within the criterion distance of 3.0 kilometers from school by improving the accessibility en route from children's home to school. PMID:21831276

49 CFR 37.85 - Purchase or lease of new intercity and commuter rail cars.

Code of Federal Regulations, 2011 CFR

2011-10-01

... rail cars. 37.85 Section 37.85 Transportation Office of the Secretary of Transportation TRANSPORTATION....85 Purchase or lease of new intercity and commuter rail cars. Amtrak or a commuter authority making a solicitation after August 25, 1990, to purchase or lease a new intercity or commuter rail car for use on the...

49 CFR 37.85 - Purchase or lease of new intercity and commuter rail cars.

Code of Federal Regulations, 2013 CFR

2013-10-01

... rail cars. 37.85 Section 37.85 Transportation Office of the Secretary of Transportation TRANSPORTATION....85 Purchase or lease of new intercity and commuter rail cars. Amtrak or a commuter authority making a solicitation after August 25, 1990, to purchase or lease a new intercity or commuter rail car for use on the...

49 CFR 37.85 - Purchase or lease of new intercity and commuter rail cars.

Code of Federal Regulations, 2014 CFR

2014-10-01

... rail cars. 37.85 Section 37.85 Transportation Office of the Secretary of Transportation TRANSPORTATION....85 Purchase or lease of new intercity and commuter rail cars. Amtrak or a commuter authority making a solicitation after August 25, 1990, to purchase or lease a new intercity or commuter rail car for use on the...

49 CFR 37.85 - Purchase or lease of new intercity and commuter rail cars.

Code of Federal Regulations, 2012 CFR

2012-10-01

... rail cars. 37.85 Section 37.85 Transportation Office of the Secretary of Transportation TRANSPORTATION....85 Purchase or lease of new intercity and commuter rail cars. Amtrak or a commuter authority making a solicitation after August 25, 1990, to purchase or lease a new intercity or commuter rail car for use on the...

Exploring Concepts of Operations for On-Demand Passenger Air Transportation

NASA Technical Reports Server (NTRS)

Nneji, Victoria Chibuogu; Stimpson, Alexander; Cummings, Mary; Goodrich, Kenneth H.

2017-01-01

In recent years, a surge of interest in "flying cars" for city commutes has led to rapid development of new technologies to help make them and similar on-demand mobility platforms a reality. To this end, this paper provides analyses of the stakeholders involved, their proposed operational concepts, and the hazards and regulations that must be addressed. Three system architectures emerged from the analyses, ranging from conventional air taxi to revolutionary fully autonomous aircraft operations, each with vehicle safety functions allocated differently between humans and machines. Advancements for enabling technologies such as distributed electric propulsion and artificial intelligence have had major investments and initial experimental success, but may be some years away from being deployed for on-demand passenger air transportation at scale.

Green Ships Bringing the Green Machine to the Fight: How a New Concept Small Deck Amphibious Ship Can Enhance the US Navy Energy Security Posture

DTIC Science & Technology

2012-02-01

ORGANIZATION NAME(S) AND ADDRESS(ES) NAVSEA 05 Chief Technology Office (SEA 05T),Washington Navy Yard,DC,20376 8. PERFORMING ORGANIZATION REPORT NUMBER...manning. ALTERNATE PROPULSION AND POWER ARCHITECHTURES Alternate propulsion and power architectures that will offer the most realistic

Choosing the Right CC Welding Unit: Student Success Depends on It

ERIC Educational Resources Information Center

Borchert, Neal

2008-01-01

Understanding the personality of a constant current (CC) dc welding machine can make the difference between a successful or unsuccessful weld test or between a student who pursues a career in welding and one who may quit in frustration. In this article, the author explains the two different "personalities" of CC welders. He also explains how…

77 FR 2058 - Agency Information Collection Activities; Proposed Collection; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-13

... through an X-ray machine and subject to search. Visitors will be provided an EPA/DC badge that must be... comments: 1. Explain your views as clearly as possible and provide specific examples. 2. Describe any... your views. 4. If you estimate potential burden or costs, explain how you arrived at the estimate that...

Active commuting to and from school among Swedish children--a national and regional study.

PubMed

Johansson, Klara; Laflamme, Lucie; Hasselberg, Marie

2012-04-01

Active commuting to school by walking or cycling can have positive impact on children's health and development. The study investigates the prevalence of active commuting to school in Sweden, a setting where it is facilitated and promoted; and how active commuting varies according to socio-demographic and socio-economic characteristics. Self-reports from a national sample of Swedish children (11- to 15-year-olds, n = 4415) and a regional one from Stockholm County (13-year-olds, n = 1008) on transport to school were compared. The association that active commuting has with socio-demographic (gender, school grade, Swedish origin, type of housing, urbanicity in the local area), and socio-economic characteristics (household socio-economic status, family car ownership) was studied using logistic regression, controlling for car ownership and urbanicity, respectively. Active commuting was high (62.9% in the national sample) but decreased with age-76% at the age of 11 years, 62% at the age of 13 years and 50% at the age of 15 years-whereas public transport increased (19-43%). Living in an apartment or row-house (compared with detached house) and living in a medium-sized city (compared with a metropolitan area) was associated with active commuting. In urban areas, active commuting was more common in worker households compared with intermediate- to high-level salaried employees. Active commuting is common but decreases with age. Active commuting differed based on housing and urbanicity but not based on gender or Swedish origin, and impact of socio-economic factors differed depending on level of urbanicity.

Weather factor impacts on commuting to work by bicycle.

PubMed

Flynn, Brian S; Dana, Greg S; Sears, Justine; Aultman-Hall, Lisa

2012-02-01

Quantify the impact of weather conditions on individual decisions to commute to work by bicycle among a diverse panel of adults who commute ≥2 miles each way. Working adults (n=163) in a northern U.S. state reported transportation mode for four seven-day periods in 2009-2010 that maximized seasonal weather variations. Personal characteristics, trip to work distances, and commuting mode data were linked to location- and time-specific weather data and daylight hours. Analyses focused on effect of weather conditions on reports of commuting by bicycle. Participants were diverse in age, gender and bicycle use, but were relatively well-educated; they traveled to work by bicycle on 34.5% of the logged commuting days. Modeling indicated that the likelihood of bicycle commuting increased in the absence of rain (odds ratio=1.91; 95% confidence interval 1.42, 2.57) and with higher temperatures (1.03; 1.02, 1.04), and decreased with snow (0.90; 0.84, 0.98) and wind (0.95; 0.92, 0.97). Independent effects also were found for bicycle commuting distance, gender, and age, but not for daylight hours. Precipitation, temperature, wind and snow conditions had significant and substantial independent effects on the odds of travel to work by bicycle among a diverse panel of adult bicycle commuters. Copyright © 2011 Elsevier Inc. All rights reserved.

Commuting to school and to work among high school students in Santa Catarina state, Brazil: a comparative analysis between 2001 and 2011.

PubMed

Silva, Kelly Samara; Lopes, Adair da Silva; Hardman, Carla Menêses; Cabral, Luciana Gatto Azevedo; da Silva, Shana Ginar; Nahas, Markus Vinicius

2014-11-01

Commuting reflects an important opportunity for youth to engage in physical activity. This study aimed to compare modes of commuting to school and to work and to identify sociodemographic factors associated with various modes of transportation. Epidemiologic study with a repeated cross-sectional design. Participants included high school students (15-19 years of age) from Santa Catarina state, Brazil, in 2001 (n = 5028) and 2011 (n = 6529). A questionnaire containing information on the type of transport used to commute to school and to work was administered. Walking/bicycling and the use of the bus to commute to school and to work remained stable after a decade; however, the use of car/motorcycle to school (6.4% versus 12.6%) and to work (10.2% versus 19.7%) increased significantly. In both cases, females more frequently used buses, whereas males commuted to work by car/bus. Students from rural areas more commonly commuted to school by car/motorcycle, whereas those from urban areas traveled to work more by bus. There was a greater use of cars/motorcycles by young people from higher-income families. The use of cars/motorcycles to commute to school/work has almost doubled in the last decade. Sex, residential area and income were associated with passive commuting.

Commuters and Parking at UNC-G. Preliminary Findings from the Commuting Student Survey.

ERIC Educational Resources Information Center

Reichard, Donald J.; McArver, Patricia P.

Data gleaned from items relating to transportation and parking from the Commuting Student Survey are reported. The survey questionnaire was designed to provide an overview of several aspects of the commuting student's relationship with the university and was sent to a stratified random sample of 2,140 students who were enrolled for the spring 1975…

A study of commuter airline economics

NASA Technical Reports Server (NTRS)

Summerfield, J. R.

1976-01-01

Variables are defined and cost relationships developed that describe the direct and indirect operating costs of commuter airlines. The study focused on costs for new aircraft and new aircraft technology when applied to the commuter airline industry. With proper judgement and selection of input variables, the operating costs model was shown to be capable of providing economic insight into other commuter airline system evaluations.

Radar channel balancing with commutation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Doerry, Armin Walter

2014-02-01

When multiple channels are employed in a pulse-Doppler radar, achieving and maintaining balance between the channels is problematic. In some circumstances the channels may be commutated to achieve adequate balance. Commutation is the switching, trading, toggling, or multiplexing of the channels between signal paths. Commutation allows modulating the imbalance energy away from the balanced energy in Doppler, where it can be mitigated with filtering.

What Factors Explain Bicycling and Walking for Commuting by ELSA-Brasil Participants?

PubMed

de Matos, Sheila Maria Alvim; Pitanga, Francisco José Gondim; Almeida, Maria da Conceição C; Queiroz, Ciro Oliveira; Dos Santos, Clarice Alves; de Almeida, Rogerio Tosta; da Silva, Ianne Tayrine Martins; Griep, Rosane Harter; Amorim, Leila Denise Alves Ferreira; Patrão, Ana Luísa; Aquino, Estela M L

2018-03-01

To analyze the factors associated with commuting by bicycling and walking in adult participants from ELSA-Brasil (Longitudinal Study of Adult Health). Cross-sectional. Six teaching/research institutions throughout Brazil. A total of 15 105 civil servants. Commuting by bicycling and walking was analyzed using the long-form International Physical Activity Questionnaire. A hierarchical model containing possible factors associated with commuting by bicycling and walking was constructed. Crude and adjusted odds ratios were calculated using multinomial logistic regression. Considering the 2 forms of commuting, 66% of the participants were being considered inactive or insufficiently active. In women, being "heavier," feeling unsafe practicing physical activity, and being a former smoker were factors negatively associated with commuting by bicycling and walking. In men, active commuting was less common among those who were overweight or had abdominal obesity, those with a negative perception of safety, and those reporting that there was nowhere suitable in the neighborhood to practice physical activity. Obesity and negative perceptions in the neighborhood are associated with inactive or insufficiently active commuting. The relevance of this finding for public health is reinforce developing policies aimed at promoting health in Brazil and in other countries with similar characteristics.

Modeling the Commuting Travel Activities within Historic Districts in Chinese Cities

PubMed Central

Yin, Fengjun; Hu, Qizhou

2014-01-01

The primary objective of this study is to analyze the characteristics of commuting activities within the historical districts in cities of China. The impacts of various explanatory variables on commuters' travels are evaluated using the structural equation modeling (SEM) approach. The household survey was conducted in the historical districts in Yangzhou, China. Based on the data, various individual and household attributes were considered exogenous variables, while the subsistence activity characteristics, travel times, numbers of three typical home-based trip chains, trip chains, and travel mode were considered as the endogenous variables. Commuters in our study were classified into two main groups according to their working location, which were the commuters in the historic district and those out of the district. The modeling results show that several individual and household attributes of commuters in historic district have significant impacts on the characteristics of travel activities. Additionally, the characteristics of travel activities within the two groups are quite different, and the contributing factors related to commuting travels are different as well. PMID:25435864

Modeling the commuting travel activities within historic districts in Chinese cities.

PubMed

Ye, Mao; Yu, Miao; Li, Zhibin; Yin, Fengjun; Hu, Qizhou

2014-01-01

The primary objective of this study is to analyze the characteristics of commuting activities within the historical districts in cities of China. The impacts of various explanatory variables on commuters' travels are evaluated using the structural equation modeling (SEM) approach. The household survey was conducted in the historical districts in Yangzhou, China. Based on the data, various individual and household attributes were considered exogenous variables, while the subsistence activity characteristics, travel times, numbers of three typical home-based trip chains, trip chains, and travel mode were considered as the endogenous variables. Commuters in our study were classified into two main groups according to their working location, which were the commuters in the historic district and those out of the district. The modeling results show that several individual and household attributes of commuters in historic district have significant impacts on the characteristics of travel activities. Additionally, the characteristics of travel activities within the two groups are quite different, and the contributing factors related to commuting travels are different as well.

Euler polynomials and identities for non-commutative operators

NASA Astrophysics Data System (ADS)

De Angelis, Valerio; Vignat, Christophe

2015-12-01

Three kinds of identities involving non-commutating operators and Euler and Bernoulli polynomials are studied. The first identity, as given by Bender and Bettencourt [Phys. Rev. D 54(12), 7710-7723 (1996)], expresses the nested commutator of the Hamiltonian and momentum operators as the commutator of the momentum and the shifted Euler polynomial of the Hamiltonian. The second one, by Pain [J. Phys. A: Math. Theor. 46, 035304 (2013)], links the commutators and anti-commutators of the monomials of the position and momentum operators. The third appears in a work by Figuieira de Morisson and Fring [J. Phys. A: Math. Gen. 39, 9269 (2006)] in the context of non-Hermitian Hamiltonian systems. In each case, we provide several proofs and extensions of these identities that highlight the role of Euler and Bernoulli polynomials.

Green Commuting in the Health Care Sector: Obstacles and Best Practices.

PubMed

Kaplan, Susan; Ai, Ning; Orris, Peter; Sriraj, P S

2016-02-01

Fossil fuel transportation by health care providers contributes to the prevalence of diseases they treat. We conducted an exploratory study to understand obstacles to, and best practices for, greener commuting among health care providers. We surveyed staff of three hospital clinics as to how they commute and why, and interviewed key staff of five hospital leaders in green commuting about their programs. Factors that might change respondents' commuting choices from driving alone included financial incentives, convenience, and solutions to crime and safety concerns. Successful green commuting programs offer benefits including free or reduced transit passes, shuttle buses to transit stations, and free emergency rides home. Exemplary programs throughout the country demonstrate that modifying those factors within reach can impact the amount of fossil fuel energy used for health care provider transportation.

[Impact of commuting on partnership and family life. A literature review of the current state of research with special emphasis on commuter marriages].

PubMed

Häfner, Steffen

2011-01-01

Because of modern working conditions, for many people commuting has increasingly become a necessity with many consequences for their health as well as for their family life and partnership. To date, little research has been done concerning the impact of this modern lifestyle on partnership and family life, particularly on dual-career couples and long-distance commuters. The results of a literature review are presented based on age, sex, family cycle and consequences for children; research questions are formulated. Sex-specific differences seem to be especially important, confirming the "household responsibility hypothesis." The commuter marriage as a new lifestyle seems to have become a coping mechanism for the increasing necessity in our society to commute.

Induction linear accelerators

NASA Astrophysics Data System (ADS)

Birx, Daniel

1992-03-01

Among the family of particle accelerators, the Induction Linear Accelerator is the best suited for the acceleration of high current electron beams. Because the electromagnetic radiation used to accelerate the electron beam is not stored in the cavities but is supplied by transmission lines during the beam pulse it is possible to utilize very low Q (typically<10) structures and very large beam pipes. This combination increases the beam breakup limited maximum currents to of order kiloamperes. The micropulse lengths of these machines are measured in 10's of nanoseconds and duty factors as high as 10-4 have been achieved. Until recently the major problem with these machines has been associated with the pulse power drive. Beam currents of kiloamperes and accelerating potentials of megavolts require peak power drives of gigawatts since no energy is stored in the structure. The marriage of liner accelerator technology and nonlinear magnetic compressors has produced some unique capabilities. It now appears possible to produce electron beams with average currents measured in amperes, peak currents in kiloamperes and gradients exceeding 1 MeV/meter, with power efficiencies approaching 50%. The nonlinear magnetic compression technology has replaced the spark gap drivers used on earlier accelerators with state-of-the-art all-solid-state SCR commutated compression chains. The reliability of these machines is now approaching 1010 shot MTBF. In the following paper we will briefly review the historical development of induction linear accelerators and then discuss the design considerations.

Dynamic modeling of brushless dc motor-power conditioner unit for electromechanical actuator application

NASA Technical Reports Server (NTRS)

Demerdash, N. A.; Nehl, T. W.

1979-01-01

A comprehensive digital model for the analysis of the dynamic-instantaneous performance of a power conditioner fed samarium-cobalt permanent magnet brushless DC motor is presented. The particular power conditioner-machine system at hand, for which this model was developed, is a component of an actual prototype electromechanical actuator built for NASA-JSC as a possible alternative to hydraulic actuators as part of feasibility studies for the shuttle orbiter applications. Excellent correlation between digital simulated and experimentally obtained performance data was achieved for this specific prototype. This is reported on in this paper. Details of one component of the model, its applications and the corresponding results are given in this paper.

An Assessment of Commuter Aircraft Noise Impact

NASA Technical Reports Server (NTRS)

Fidell, Sanford; Pearsons, Karl S.; Silvati, Laura; Sneddon, Matthew

1996-01-01

This report examines several approaches to understanding 'the commuter aircraft noise problem.' The commuter aircraft noise problem in the sense addressed in this report is the belief that some aspect(s) of community response to noise produced by commuter aircraft operations may not be fully assessed by conventional environmental noise metrics and methods. The report offers alternate perspectives and approaches for understanding this issue. The report also develops a set of diagnostic screening questions; describes commuter aircraft noise situations at several airports; and makes recommendations for increasing understanding of the practical consequences of greater heterogeneity in the air transport fleet serving larger airports.

Power Supply Changes for NSTX Resistive Wall Mode Coils

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ramakrishnan, S S.

The National Spherical Torus Experiment (NSTX) has been designed and installed in the existing facilities at Princeton Plasma Physics Laboratory (PPPL). Most of the hardware, plant facilities, auxiliary sub-systems, and power systems originally used for the Tokamak Fusion Test Reactor (TFTR) have been used with suitable modifications to reflect NSTX needs. Prior to 2004, the NSTX power system was feeding twelve (12) circuits in the machine. In 2004 the Resistive Wall Mode (RWM) Coils were installed on the machine to correct error fields. There are six of these coils installed around the machine in the mid-plane. Since these coils needmore » fast and accurate controls, a Switching Power Amplifier (SPA) with three sub-units was procured, installed and commissioned along with other power loop components. Two RWM Coils were connected in series and fed from one SPA sub-unit. After the initial RWM campaign, operational requirements evolved such that each of the RWM coils now requires separate power and control. Hence a second SPA with three sub-units has been procured and installed. The second unit is of improved design and has the controls and power components completely isolated. The existing thyristor rectifier is used as DC Link to both of the Switching Power Amplifiers. The controls for the RWM are integrated into the overall computer control of the DC Power systems for NSTX. This paper describes the design changes in the RWM Power system for NSTX.« less

41 CFR 302-7.14 - Are there any disadvantages to using the commuted rate method for transporting HHG, PBP&E and...

Code of Federal Regulations, 2010 CFR

2010-07-01

... disadvantages to using the commuted rate method for transporting HHG, PBP&E and temporary storage? 302-7.14... disadvantages to using the commuted rate method for transporting HHG, PBP&E and temporary storage? Yes. The disadvantages to using the commuted rate method for transporting HHG, PBP&E and temporary storage are that the...

Impact of the Mexican Alien Commuter on the Apparel Industry of El Paso, Texas--A Case Study. Final Report.

ERIC Educational Resources Information Center

Rungeling, Brian Scott

This study analyzed what effect commuters had on wage levels, employment, and industrial locations, and the relative importance of the commuter as part of the work force. A questionnaire was administered to 190 workers and to their 20 employers in the apparel industry of El Paso, Texas. The questionnaires revealed that the commuters were paid the…

Changes in mode of travel to work: a natural experimental study of new transport infrastructure.

PubMed

Heinen, Eva; Panter, Jenna; Mackett, Roger; Ogilvie, David

2015-06-20

New transport infrastructure may promote a shift towards active travel, thereby improving population health. The purpose of this study was to determine the effect of a major transport infrastructure project on commuters' mode of travel, trip frequency and distance travelled to work. Quasi-experimental analysis nested within a cohort study of 470 adults working in Cambridge, UK. The intervention consisted of the opening of a guided busway with a path for walking and cycling in 2011. Exposure to the intervention was defined as the negative of the square root of the shortest distance from home to busway. The outcome measures were changes in commute mode share and number of commute trips - both based on a seven-day travel-to-work record collected before (2009) and after (2012) the intervention - and change in objective commute distance. The mode share outcomes were changes in the proportions of trips (i) involving any active travel, (ii) involving any public transport, and (iii) made entirely by car. Separate multinomial regression models were estimated adjusting for commute and sociodemographic characteristics, residential settlement size and life events. Proximity to the busway predicted an increased likelihood of a large (>30 %) increase in the share of commute trips involving any active travel (relative risk ratio [RRR] 1.80, 95 % CI 1.27, 2.55) and a large decrease in the share of trips made entirely by car (RRR 2.09, 95 % CI 1.35, 3.21), as well as a lower likelihood of a small (<30 %) reduction in the share of trips involving any active travel (RRR 0.47, 95 % CI 0.28, 0.81). It was not associated with changes in the share of commute trips involving any public transport, the number of commute trips, or commute distance. The new infrastructure promoted an increase in the share of commuting trips involving active travel and a decrease in the share made entirely by car. Further analysis will show the extent to which the changes in commute mode share were translated into an increase in time spent in active commuting and consequent health gain.

Socio-demographic, personal, environmental and behavioral correlates of different modes of transportation to work among Norwegian parents.

PubMed

Bjørkelund, Oline Anita; Degerud, Hanna; Bere, Elling

2016-01-01

Cycling and brisk-walking to work represents an opportunity to incorporate sustainable transport related moderate- to- vigorous physical activity (MVPA) into daily routine among adults, and thus, may make an important contributing to health. Despite the fact that walking and cycling is an option for many commuters and also brings a number of benefits, a considerable proportion of commuters choose to use other means of transport when cycling and walking would be a highly appropriate transport mode. The object of this study was to assess the associations between modes of commuting to the workplace among parental adults; taking socio-demographic, personal, environmental and behavioral factors into account. Data from a cross- sectional questionnaire were collected from a sample of 709 parents (23 % men and 77 % women) of children aged 10-12 years-old in two Norwegian counties, Hedmark and Telemark. Commuting behavior, socio- demographic determinants, personal and environmental factors were ascertained using questionnaire data from the Fruit and Vegetables Makes the Marks project (FVMM). Multivariate logistic regressions were applied. In total, 70 % of adults were categorized as car commuters to and from work, 12 % was categorized as a cyclist and 7 % as a walker. The multivariate analyses showed that active commuters were more likely to have a shorter distance to work and perceived the traffic as more safe. Moreover, those who actively commute to the workplace considered commuting as a way to obtain health benefits and a way to reduce CO 2 emissions. Active commuters also considered weather to be an obstacle to active commuting. In this cross-sectional study of parents living in sub-urban Norway, we found that active commuting to and from the workplace were associated with a shorter distance to work, traffic safety, environmental concern, health benefits and weather condition. In light of these findings, cycling to work seems to be the most appropriate target for interventions and public health campaigns within this population.

Power conditioning unit for photovoltaic power systems

NASA Astrophysics Data System (ADS)

Beghin, G.; Nguyen Phuoc, V. T.

Operational features and components of a power conditioning unit for interconnecting solar cell module powers with a utility grid are outlined. The two-stage unit first modifies the voltage to desired levels on an internal dc link, then inverts the current in 2 power transformers connected to a vector summation control to neutralize harmonic distortion up to the 11th harmonic. The system operates in parallel with the grid with extra inductors to absorb line-to-line voltage and phase differences, and permits peak power use from the PV array. Reactive power is gained internally, and a power system controller monitors voltages, frequencies, and currents. A booster preregulator adjusts the input voltage from the array to provide voltage regulation for the inverter, and can commutate 450 amps. A total harmonic distortion of less than 5 percent is claimed, with a rating of 5 kVA, 50/60 Hz, 3-phase, and 4-wire.

Private and public modes of bicycle commuting: a perspective on attitude and perception.

PubMed

Curto, A; de Nazelle, A; Donaire-Gonzalez, D; Cole-Hunter, T; Garcia-Aymerich, J; Martínez, D; Anaya, E; Rodríguez, D; Jerrett, M; Nieuwenhuijsen, M J

2016-08-01

Public bicycle-sharing initiatives can act as health enhancement strategies among urban populations. The aim of the study was to determine which attitudes and perceptions of behavioural control toward cycling and a bicycle-sharing system distinguish commuters with a different adherence to bicycle commuting. The recruitment process was conducted in 40 random points in Barcelona from 2011 to 2012. Subjects completed a telephone-based questionnaire including 27 attitude and perception statements. Based on their most common one-way commute trip and willingness to commute by bicycle, subjects were classified into Private Bicycle (PB), public bicycle or Bicing Bicycle (BB), Willing Non-bicycle (WN) and Non-willing Non-bicycle (NN) commuters. After reducing the survey statements through principal component analysis, a multinomial logistic regression model was obtained to evaluate associations between attitudinal and commuter sub-groups. We included 814 adults in the analysis [51.6% female, mean (SD): age 36.6 (10.3) years]. BB commuters were 2.0 times [95% confidence interval (CI) = 1.1-3.7] less likely to perceive bicycle as a quick, flexible and enjoyable mode compared to PB. BB, WN and NN were 2.5 (95% CI = 1.46-4.24), 2.6 (95% CI = 1.53-4.41) and 2.3 times (95% CI = 1.30-4.10) more likely to perceive benefits of using public bicycles (bicycle maintenance and parking avoidance, low cost and no worries about theft and vandalism) than did PB. Willing non-bicycle and public-bicycle commuters had more favourable perception toward public-shared bicycles compared to private cyclists. Hence, public bicycles may be the impetus for those willing to start bicycle commuting, thereby increasing physical activity levels. © The Author 2016. Published by Oxford University Press on behalf of the European Public Health Association. All rights reserved.

The relevance of commuter and work/school exposure in an epidemiological study on traffic-related air pollution.

PubMed

Ragettli, Martina S; Phuleria, Harish C; Tsai, Ming-Yi; Schindler, Christian; de Nazelle, Audrey; Ducret-Stich, Regina E; Ineichen, Alex; Perez, Laura; Braun-Fahrländer, Charlotte; Probst-Hensch, Nicole; Künzli, Nino

2015-01-01

Exposure during transport and at non-residential locations is ignored in most epidemiological studies of traffic-related air pollution. We investigated the impact of separately estimating NO2 long-term outdoor exposures at home, work/school, and while commuting on the association between this marker of exposure and potential health outcomes. We used spatially and temporally resolved commuter route data and model-based NO2 estimates of a population sample in Basel, Switzerland, to assign individual NO2-exposure estimates of increasing complexity, namely (1) home outdoor concentration; (2) time-weighted home and work/school concentrations; and (3) time-weighted concentration incorporating home, work/school and commute. On the basis of their covariance structure, we estimated the expectable relative differences in the regression slopes between a quantitative health outcome and our measures of individual NO2 exposure using a standard measurement error model. The traditional use of home outdoor NO2 alone indicated a 12% (95% CI: 11-14%) underestimation of related health effects as compared with integrating both home and work/school outdoor concentrations. Mean contribution of commuting to total weekly exposure was small (3.2%; range 0.1-13.5%). Thus, ignoring commute in the total population may not significantly underestimate health effects as compared with the model combining home and work/school. For individuals commuting between Basel-City and Basel-Country, ignoring commute may produce, however, a significant attenuation bias of 4% (95% CI: 4-5%). Our results illustrate the importance of including work/school locations in assessments of long-term exposures to traffic-related air pollutants such as NO2. Information on individuals' commuting behavior may further improve exposure estimates, especially for subjects having lengthy commutes along major transportation routes.

NYPA/TH!NK Clean Commute Program Report – Inception Through May 2004

DOE Office of Scientific and Technical Information (OSTI.GOV)

Don Karner; James Francfort; Randall Solomon

The Clean Commute Program uses TH!NK city electric vehicles from Ford Motor Company’s electric vehicle group, TH!NK Mobility, to demonstrate the feasibility of using electric vehicles for transportation in urban applications. Suburban New York City railroad commuters use the TH!NK city vehicles to commute from their private residences to railroad stations, where they catch commuter trains into New York City. Electric vehicle charging infrastructure for the TH!NK city vehicles is located at the commuters’ private residences as well as seven train stations. Ford leased 97 TH!NK city electric vehicles to commuters from Westchester, Putnam, Rockland, Queens, Nassau, and Suffolk countiesmore » for $199 per month per vehicle. The first Clean Commute Program vehicle deliveries occurred late in 2001, with data collection commencing in February 2002. Through May 2004, 24 of the lessees have returned their vehicles to Ford and no longer participate in the Clean Commute Program. Reasons given for returning the vehicles include relocation out of the Program area, change in employment status, change in commuting status, and, in a few cases, dissatisfaction with the vehicle. Additionally, 13 vehicles have been returned to Ford as their leases have completed. In August 2002, Ford announced that it was ceasing production of the TH!NK city and would not extend any TH!NK city leases. Through May 2004, participants in the Clean Commute Program have driven their vehicles over 370,000 miles, avoiding the use of over 17,000 gallons of gasoline. The TH!NK city vehicles are driven an average of between 180 and 230 miles per month, and over 95% of all trips taken with the TH!NK city vehicles replace trips previously taken in gasoline vehicles. This report covers the period from Program inception through May 2004.« less

Longitudinal associations of active commuting with body mass index.

PubMed

Mytton, Oliver Tristan; Panter, Jenna; Ogilvie, David

2016-09-01

To investigate the longitudinal associations between active commuting (walking and cycling to work) and body mass index (BMI). We used self-reported data on height, weight and active commuting from the Commuting and Health in Cambridge study (2009 to 2012; n=809). We used linear regression to test the associations between: a) maintenance of active commuting over one year and BMI at the end of that year; and b) change in weekly time spent in active commuting and change in BMI over one year. After adjusting for sociodemographic variables, other physical activity, physical wellbeing and maintenance of walking, those who maintained cycle commuting reported a lower BMI on average at one year follow-up (1.14kg/m(2), 95% CI: 0.30 to 1.98, n=579) than those who never cycled to work. No significant association remained after adjustment for baseline BMI. No significant associations were observed for maintenance of walking. An increase in walking was associated with a reduction in BMI (0.32kg/m(2), 95% CI: 0.03 to 0.62, n=651, after adjustment for co-variates and baseline BMI) only when restricting the analysis to those who did not move. No other significant associations between changes in weekly time spent walking or cycling on the commute and changes in BMI were observed. This work provides further evidence of the contribution of active commuting, particularly cycling, to preventing weight gain or facilitating weight loss. The findings may be valuable for employees choosing how to commute and engaging employers in the promotion of active travel. Copyright © 2016 The Authors. Published by Elsevier Inc. All rights reserved.

A Dream of Yukawa — Non-Local Fields out of Non-Commutative Spacetime —

NASA Astrophysics Data System (ADS)

Naka, Shigefumi; Toyoda, Haruki; Takanashi, Takahiro; Umezawa, Eizo

The coordinates of κ-Minkowski spacetime form Lie algebraic elements, in which time and space coordinates do not commute in spite of that space coordinates commute each other. The non-commutativity is realized by a Planck-length-scale constant κ - 1( ne 0), which is a universal constant other than the light velocity under the κ-Poincare transformation. Such a non-commutative structure can be realized by SO(1,4) generators in dS4 spacetime. In this work, we try to construct a κ-Minkowski like spacetime with commutative 4-dimensional spacetime based on Adsn+1 spacetime. Another aim of this work is to study invariant wave equations in this spacetime from the viewpoint of non-local field theory by H. Yukawa, who expected to realize elementary particle theories without divergence according to this viewpoint.

Environmental and psychological correlates of older adult's active commuting.

PubMed

Panter, Jenna R; Jones, Andrew P; van Sluijs, Esther M F; Griffin, Simon J; Wareham, Nicholas J

2011-07-01

This study explored the environmental and psychological correlates of active commuting in a sample of adults from the European Prospective Investigation into Cancer Norfolk cohort. Members of the cohort who were in employment, lived within 10 km of work, and did not report a limitation that precluded walking were included in this analysis. Psychological factors, perceptions of the neighborhood environment and travel mode to work were reported using questionnaires. Neighborhood and route environmental characteristics were estimated objectively using a geographical information system. The mediating effects of psychological factors were assessed using a series of regression models. A total of 1279 adults (mean age=60.4 yr, SD=5.4 yr) were included in this analysis, of whom 25% actively commuted to work. In multivariable regression analyses, those who reported strong habits for walking or cycling were more likely to actively commute, whereas those living 4-10 km from work were less likely to actively commute. In addition, living in a rural area was associated with a decreased likelihood of men's active commuting, and in women, living in a neighborhood with high road density and having a route to work that was not on a main or secondary road was associated with an increased likelihood of active commuting. There was weak evidence that habit acted to partly mediate the associations between environmental correlates and active commuting in both sexes. The findings suggest that interventions designed to encourage the development of habitual behaviors for active commuting may be effective, especially among those living close to work.

Simulation of population-based commuter exposure to NO₂ using different air pollution models.

PubMed

Ragettli, Martina S; Tsai, Ming-Yi; Braun-Fahrländer, Charlotte; de Nazelle, Audrey; Schindler, Christian; Ineichen, Alex; Ducret-Stich, Regina E; Perez, Laura; Probst-Hensch, Nicole; Künzli, Nino; Phuleria, Harish C

2014-05-12

We simulated commuter routes and long-term exposure to traffic-related air pollution during commute in a representative population sample in Basel (Switzerland), and evaluated three air pollution models with different spatial resolution for estimating commute exposures to nitrogen dioxide (NO2) as a marker of long-term exposure to traffic-related air pollution. Our approach includes spatially and temporally resolved data on actual commuter routes, travel modes and three air pollution models. Annual mean NO2 commuter exposures were similar between models. However, we found more within-city and within-subject variability in annual mean (±SD) NO2 commuter exposure with a high resolution dispersion model (40 ± 7 µg m(-3), range: 21-61) than with a dispersion model with a lower resolution (39 ± 5 µg m(-3); range: 24-51), and a land use regression model (41 ± 5 µg m(-3); range: 24-54). Highest median cumulative exposures were calculated along motorized transport and bicycle routes, and the lowest for walking. For estimating commuter exposure within a city and being interested also in small-scale variability between roads, a model with a high resolution is recommended. For larger scale epidemiological health assessment studies, models with a coarser spatial resolution are likely sufficient, especially when study areas include suburban and rural areas.

Bicycle Commuting and Exposure to Air Pollution: A Questionnaire-Based Investigation of Perceptions, Symptoms, and Risk Management Strategies.

PubMed

Cole-Hunter, Tom; Morawska, Lidia; Solomon, Colin

2015-04-01

An increase in bicycle commuting participation may improve public health and traffic congestion in cities. Information on air pollution exposure (such as perception, symptoms, and risk management) contributes to the responsible promotion of bicycle commuting participation. To determine perceptions, symptoms, and willingness for specific exposure risk management strategies of exposure to air pollution, a questionnaire-based cross-sectional investigation was conducted with adult bicycle commuters (n = 153; age = 41 ± 11 years; 28% female). Frequency of acute respiratory signs and symptoms were positively associated with in-commute and postcommute compared with precommute time periods (P < .05); there was greater positive association with respiratory disorder compared with healthy, and female compared with male, participants. The perception (but not signs or symptoms) of in-commute exposure to air pollution was positively associated with the estimated level of in-commute proximity to motorized traffic. The majority of participants indicated a willingness (which varied with health status and gender) to adopt risk management strategies (with desired features) if shown to be appropriate and effective. While acute signs and symptoms of air pollution exposure are indicated with bicycle commuting, and more so in susceptible individuals, there is willingness to manage exposure risk by adopting effective strategies with desired features.

Potential health impact of switching from car to public transportation when commuting to work.

PubMed

Morabia, Alfredo; Mirer, Franklin E; Amstislavski, Tashia M; Eisl, Holger M; Werbe-Fuentes, Jordan; Gorczynski, John; Goranson, Chris; Wolff, Mary S; Markowitz, Steven B

2010-12-01

We assessed humidity-corrected particulate matter (PM(2.5)) exposure and physical activity (using global positioning system monitors and diaries) among 18 people who commuted by car to Queens College, New York, New York, for 5 days, and then switched to commuting for the next 5 days via public transportation. The PM(2.5) differed little between car and public transportation commutes (1.41 μg/M(3)·min; P = .226). Commuting by public transportation rather than by car increased energy expenditure (+124 kcal/day; P < .001) equivalent to the loss of 1 pound of body fat per 6 weeks.

Potential Health Impact of Switching From Car to Public Transportation When Commuting to Work

PubMed Central

Mirer, Franklin E.; Amstislavski, Tashia M.; Eisl, Holger M.; Werbe-Fuentes, Jordan; Gorczynski, John; Goranson, Chris; Wolff, Mary S.; Markowitz, Steven B.

2010-01-01

We assessed humidity-corrected particulate matter (PM2.5) exposure and physical activity (using global positioning system monitors and diaries) among 18 people who commuted by car to Queens College, New York, New York, for 5 days, and then switched to commuting for the next 5 days via public transportation. The PM2.5 differed little between car and public transportation commutes (1.41 μg/M3·min; P = .226). Commuting by public transportation rather than by car increased energy expenditure (+124 kcal/day; P < .001) equivalent to the loss of 1 pound of body fat per 6 weeks. PMID:20966368

Commuter Connection : Flexible Ridesharing in Marin County, California

DOT National Transportation Integrated Search

1981-12-01

This is a final report documenting the Commuter Connection Flexible Registered Ridesharing Demonstration Project. The purpose of this project was to test the feasibility of flexible registered ridesharing, which is a system whereby registered commute...

Daily commuting to work is not associated with variables of health.

PubMed

Mauss, Daniel; Jarczok, Marc N; Fischer, Joachim E

2016-01-01

Commuting to work is thought to have a negative impact on employee health. We tested the association of work commute and different variables of health in German industrial employees. Self-rated variables of an industrial cohort (n = 3805; 78.9 % male) including absenteeism, presenteeism and indices reflecting stress and well-being were assessed by a questionnaire. Fasting blood samples, heart-rate variability and anthropometric data were collected. Commuting was grouped into one of four categories: 0-19.9, 20-44.9, 45-59.9, ≥60 min travelling one way to work. Bivariate associations between commuting and all variables under study were calculated. Linear regression models tested this association further, controlling for potential confounders. Commuting was positively correlated with waist circumference and inversely with triglycerides. These associations did not remain statistically significant in linear regression models controlling for age, gender, marital status, and shiftwork. No other association with variables of physical, psychological, or mental health and well-being could be found. The results indicate that commuting to work has no significant impact on well-being and health of German industrial employees.

Excitation system for rotating synchronous machines

DOEpatents

Umans, Stephen D.; Driscoll, David J.

2002-01-01

A system for providing DC current to a rotating superconducting winding is provided. The system receives current feedback from the superconducting winding and determines an error signal based on the current feedback and a reference signal. The system determines a control signal corresponding to the error signal and provides a positive and negative superconducting winding excitation voltage based on the control signal.

77 FR 5091 - Certain New Chemicals; Receipt and Status Information

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-01

... identification, pass through a metal detector, and sign the EPA visitor log. All visitor bags are processed through an X-ray machine and subject to search. Visitors will be provided an EPA/DC badge that must be... clear coatings for wood, plastic and metal. P-12-0055 11/17/2011 02/14/2012 CBI (G) Foam stabilizer and...

Permanent magnet energy conversion machine with magnet mounting arrangement

DOEpatents

Hsu, John S.; Adams, Donald J.

1999-01-01

A hybrid permanent magnet dc motor includes three sets of permanent magnets supported by the rotor and three sets of corresponding stators fastened to the surrounding frame. One set of magnets operates across a radial gap with a surrounding radial gap stator, and the other two sets of magnets operate off the respective ends of the rotor across respective axial gaps.

Advanced single permanent magnet axipolar ironless stator ac motor for electric passenger vehicles

NASA Technical Reports Server (NTRS)

Beauchamp, E. D.; Hadfield, J. R.; Wuertz, K. L.

1983-01-01

A program was conducted to design and develop an advanced-concept motor specifically created for propulsion of electric vehicles with increased range, reduced energy consumption, and reduced life-cycle costs in comparison with conventional systems. The motor developed is a brushless, dc, rare-earth cobalt, permanent magnet, axial air gap inductor machine that uses an ironless stator. Air cooling is inherent provided by the centrifugal-fan action of the rotor poles. An extensive design phase was conducted, which included analysis of the system performance versus the SAE J227a(D) driving cycle. A proof-of-principle model was developed and tested, and a functional model was developed and tested. Full generator-level testing was conducted on the functional model, recording electromagnetic, thermal, aerodynamic, and acoustic noise data. The machine demonstrated 20.3 kW output at 1466 rad/s and 160 dc. The novel ironless stator demonstated the capability to continuously operate at peak current. The projected system performance based on the use of a transistor inverter is 23.6 kW output power at 1466 rad/s and 83.3 percent efficiency. Design areas of concern regarding electric vehicle applications include the inherently high windage loss and rotor inertia.

Spacetime Non-Commutativity Corrections to the Cardy-Verlinde Formula of Achúcarro-Ortiz Black Hole

NASA Astrophysics Data System (ADS)

Setare, M. R.

2007-02-01

In this letter we compute the corrections to the Cardy-Verlinde formula of Achúcarro-Ortiz black hole, which is the most general two-dimensional black hole derived from the three-dimensional rotating Banados-Teitelboim-Zanelli black hole. These corrections stem from the space non-commutativity. We show that in non-commutative case, non-rotating Achúcarro-Ortiz black hole in contrast with commutative case has two horizons.

Groenewold-Moyal product, α*-cohomology, and classification of translation-invariant non-commutative structures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Varshovi, Amir Abbass

2013-07-15

The theory of α*-cohomology is studied thoroughly and it is shown that in each cohomology class there exists a unique 2-cocycle, the harmonic form, which generates a particular Groenewold-Moyal star product. This leads to an algebraic classification of translation-invariant non-commutative structures and shows that any general translation-invariant non-commutative quantum field theory is physically equivalent to a Groenewold-Moyal non-commutative quantum field theory.

A reconstruction theorem for Connes-Landi deformations of commutative spectral triples

NASA Astrophysics Data System (ADS)

Ćaćić, Branimir

2015-12-01

We formulate and prove an extension of Connes's reconstruction theorem for commutative spectral triples to so-called Connes-Landi or isospectral deformations of commutative spectral triples along the action of a compact Abelian Lie group G, also known as toric noncommutative manifolds. In particular, we propose an abstract definition for such spectral triples, where noncommutativity is entirely governed by a deformation parameter sitting in the second group cohomology of the Pontryagin dual of G, and then show that such spectral triples are well-behaved under further Connes-Landi deformation, thereby allowing for both quantisation from and dequantisation to G-equivariant abstract commutative spectral triples. We then use a refinement of the Connes-Dubois-Violette splitting homomorphism to conclude that suitable Connes-Landi deformations of commutative spectral triples by a rational deformation parameter are almost-commutative in the general, topologically non-trivial sense.

Asthma and school commuting time.

PubMed

McConnell, Rob; Liu, Feifei; Wu, Jun; Lurmann, Fred; Peters, John; Berhane, Kiros

2010-08-01

This study examined associations of asthma with school commuting time. Time on likely school commute route was used as a proxy for on-road air pollution exposure among 4741 elementary school children at enrollment into the Children's Health Study. Lifetime asthma and severe wheeze (including multiple attacks, nocturnal, or with shortness of breath) were reported by parents. In asthmatic children, severe wheeze was associated with commuting time (odds ratio, 1.54 across the 9-minute 5% to 95% exposure distribution; 95% confidence interval, 1.01 to 2.36). The association was stronger in analysis restricted to asthmatic children with commuting times 5 minutes or longer (odds ratio, 1.97; 95% confidence interval, 1.02 to 3.77). No significant associations were observed with asthma prevalence. Among asthmatics, severe wheeze was associated with relatively short school commuting times. Further investigation of effects of on-road pollutant exposure is warranted.

A double commutant theorem for Murray–von Neumann algebras

PubMed Central

Liu, Zhe

2012-01-01

Murray–von Neumann algebras are algebras of operators affiliated with finite von Neumann algebras. In this article, we study commutativity and affiliation of self-adjoint operators (possibly unbounded). We show that a maximal abelian self-adjoint subalgebra of the Murray–von Neumann algebra associated with a finite von Neumann algebra is the Murray–von Neumann algebra , where is a maximal abelian self-adjoint subalgebra of and, in addition, is . We also prove that the Murray–von Neumann algebra with the center of is the center of the Murray–von Neumann algebra . Von Neumann’s celebrated double commutant theorem characterizes von Neumann algebras as those for which , where , the commutant of , is the set of bounded operators on the Hilbert space that commute with all operators in . At the end of this article, we present a double commutant theorem for Murray–von Neumann algebras. PMID:22543165

Methods and apparatus using commutative error detection values for fault isolation in multiple node computers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Almasi, Gheorghe; Blumrich, Matthias Augustin; Chen, Dong

Methods and apparatus perform fault isolation in multiple node computing systems using commutative error detection values for--example, checksums--to identify and to isolate faulty nodes. When information associated with a reproducible portion of a computer program is injected into a network by a node, a commutative error detection value is calculated. At intervals, node fault detection apparatus associated with the multiple node computer system retrieve commutative error detection values associated with the node and stores them in memory. When the computer program is executed again by the multiple node computer system, new commutative error detection values are created and stored inmore » memory. The node fault detection apparatus identifies faulty nodes by comparing commutative error detection values associated with reproducible portions of the application program generated by a particular node from different runs of the application program. Differences in values indicate a possible faulty node.« less

Environmental And Psychological Correlates of Older Adult’s Active Commuting

PubMed Central

Panter, Jenna; Jones, Andrew; van Sluijs, Esther; Griffin, Simon; Wareham, Nicholas

2013-01-01

Purpose This study explored the environmental and psychological correlates of active commuting in a sample of adults from the European Prospective Investigation into Cancer (EPIC) Norfolk cohort. Methods Members of the cohort who were in employment, lived within 10km of work, and did not report a limitation that precluded walking were included in this analysis. Psychological factors, perceptions of the neighbourhood environment and travel mode to work were reported using questionnaires. Neighbourhood and route environmental characteristics were estimated objectively using a Geographical Information System. The mediating effects of psychological factors were assessed using a series of regression models. Results 1279 adults (mean age of 60.4 years SD=5.4) were included in this analysis, of which, 25% actively commuted to work. In multivariable regression analyses, those who reported strong habits for walking or cycling were more likely to actively commute, whilst those living 4-10km from work were less likely to actively commute. In addition, living in a rural area was associated with a decreased likelihood of men’s active commuting and in women, living in a neighbourhood with high road density and having a route to work which was not on a main or secondary road was associated with an increased likelihood of active commuting. There was weak evidence that habit acted to partly mediate the associations between environmental correlates and active commuting in both sexes. Conclusions The findings suggest that interventions designed to encourage the development of habitual behaviours for active commuting may be effective, especially amongst those living close to work. PMID:21131863

Exposure to traffic pollution, acute inflammation and autonomic response in a panel of car commuters.

PubMed

Sarnat, Jeremy A; Golan, Rachel; Greenwald, Roby; Raysoni, Amit U; Kewada, Priya; Winquist, Andrea; Sarnat, Stefanie E; Dana Flanders, W; Mirabelli, Maria C; Zora, Jennifer E; Bergin, Michael H; Yip, Fuyuen

2014-08-01

Exposure to traffic pollution has been linked to numerous adverse health endpoints. Despite this, limited data examining traffic exposures during realistic commutes and acute response exists. We conducted the Atlanta Commuters Exposures (ACE-1) Study, an extensive panel-based exposure and health study, to measure chemically-resolved in-vehicle exposures and corresponding changes in acute oxidative stress, lipid peroxidation, pulmonary and systemic inflammation and autonomic response. We recruited 42 adults (21 with and 21 without asthma) to conduct two 2-h scripted highway commutes during morning rush hour in the metropolitan Atlanta area. A suite of in-vehicle particulate components were measured in the subjects' private vehicles. Biomarker measurements were conducted before, during, and immediately after the commutes and in 3 hourly intervals after commutes. At measurement time points within 3h after the commute, we observed mild to pronounced elevations relative to baseline in exhaled nitric oxide, C-reactive-protein, and exhaled malondialdehyde, indicative of pulmonary and systemic inflammation and oxidative stress initiation, as well as decreases relative to baseline levels in the time-domain heart-rate variability parameters, SDNN and rMSSD, indicative of autonomic dysfunction. We did not observe any detectable changes in lung function measurements (FEV1, FVC), the frequency-domain heart-rate variability parameter or other systemic biomarkers of vascular injury. Water soluble organic carbon was associated with changes in eNO at all post-commute time-points (p<0.0001). Our results point to measureable changes in pulmonary and autonomic biomarkers following a scripted 2-h highway commute. Copyright © 2014 Elsevier Inc. All rights reserved.

Exposure to traffic pollution, acute inflammation and autonomic response in a panel of car commuters

PubMed Central

Sarnat, Jeremy A.; Golan, Rachel; Greenwald, Roby; Raysoni, Amit U.; Kewada, Priya; Winquist, Andrea; Sarnat, Stefanie E.; Flanders, W. Dana; Mirabelli, Maria C.; Zora, Jennifer E.; Bergin, Michael H.; Yip, Fuyuen

2015-01-01

Background Exposure to traffic pollution has been linked to numerous adverse health endpoints. Despite this, limited data examining traffic exposures during realistic commutes and acute response exists. Objectives: We conducted the Atlanta Commuters Exposures (ACE-1) Study, an extensive panel-based exposure and health study, to measure chemically-resolved in-vehicle exposures and corresponding changes in acute oxidative stress, lipid peroxidation, pulmonary and systemic inflammation and autonomic response. Methods We recruited 42 adults (21 with and 21 without asthma) to conduct two 2-h scripted highway commutes during morning rush hour in the metropolitan Atlanta area. A suite of in-vehicle particulate components were measured in the subjects’ private vehicles. Biomarker measurements were conducted before, during, and immediately after the commutes and in 3 hourly intervals after commutes. Results At measurement time points within 3 h after the commute, we observed mild to pronounced elevations relative to baseline in exhaled nitric oxide, C-reactive-protein, and exhaled malondialdehyde, indicative of pulmonary and systemic inflammation and oxidative stress initiation, as well as decreases relative to baseline levels in the time-domain heart-rate variability parameters, SDNN and rMSSD, indicative of autonomic dysfunction. We did not observe any detectable changes in lung function measurements (FEV1, FVC), the frequency-domain heart-rate variability parameter or other systemic biomarkers of vascular injury. Water soluble organic carbon was associated with changes in eNO at all post-commute time-points (p < 0.0001). Conclusions Our results point to measureable changes in pulmonary and autonomic biomarkers following a scripted 2-h highway commute. PMID:24906070

Six-year trend in active commuting to school in Spanish adolescents. The AVENA and AFINOS Studies.

PubMed

Chillón, Palma; Martínez-Gómez, David; Ortega, Francisco B; Pérez-López, Isaac J; Díaz, Ligia E; Veses, Ana M; Veiga, Oscar L; Marcos, Ascensión; Delgado-Fernández, Manuel

2013-12-01

Promoting daily routine activities, such as active commuting to school, may have important health implications for young people. The aim of the study was to examine the secular trend of active commuting to school in Spanish adolescents over a 6-year period (2001-2002 to 2006-2007). We also examined several factors that might explain this trend. Data comes from two separate cross-sectional studies, both representatives from the city of Madrid (Spain): AVENA and AFINOS studies. These took place in 2001-2002 and 2006-2007 and included 415 (198 girls) and 891 (448 girls) adolescents aged 13-17, respectively. Commuting to school was assessed using a standardized question about their habitual mode of transportation to school: walking, cycling, bus/subway, car, or motorcycle. Chi-square and binary logistic regression were used. Percentage of active commuting girls decreased significantly from 61 % to 48 % (p = 0.002) from 2001-2002 to 2006-2007. Walking declined from 61 % to 46 % and the use of bus/subway increased from 25 % to 37 % in girls. Girls belonging to average/small families had lower odds of being active commuters than girls of large families (OR, 95 % CI: 0.69, 0.48 to 0.98). There were no significant differences in mode of commuting to school for boys (p = 0.269). Spanish adolescent girls in 2007-2008 had lower levels of active commuting to school, mainly walking, than their counterparts 6 years before. Belonging to a large family was related with higher active commuting in girls.

Commuting in Texas : patterns and trends

DOT National Transportation Integrated Search

1999-05-01

There have been significant changes over the past two decades in Texas commuting patterns. The expansion and changing natural of the workforce has resulted in an increase in commute trips and vehicle ownership. The growth in suburban and exurban empl...

Analysis of Commuter Rail Costs and Cost Allocation Methods

DOT National Transportation Integrated Search

1983-07-01

The report addresses the issues of commuter rail service costs and the compensation methods used to allocate railroad expenses to the commuter service function. The report consists of six sections. Section 1 describes the study purpose, scope, method...

Factors affecting commuter rail energy efficiency.

DOT National Transportation Integrated Search

2016-02-17

The objective of this study is to develop a planninglevel model of commuter rail energy efficiency. The : environmental benefits of commuter rail are often cited as one of the key benefits and motivators for its rapid development as a public trans...

Quasi-Static and Dynamic Sled Testing of Prototype Commuter Rail Passenger Seats

DOT National Transportation Integrated Search

2008-04-22

In support of the Federal Railroad Administration?s (FRA) Railroad Equipment Safety Program, tests have been conducted on prototype commuter rail passenger seats which have been designed for improved occupant protection during commuter train accident...

Can Walking or Biking to Work Really Make a Difference? Compact Development, Observed Commuter Choice and Body Mass Index.

PubMed

Wojan, Timothy R; Hamrick, Karen S

2015-01-01

Promoting active commuting is viewed as one strategy to increase physical activity and improve the energy balance of more sedentary individuals thereby improving health outcomes. However, the potential effectiveness of promotion policies may be seriously undermined by the endogenous choice of commute mode. Policy to promote active commuting will be most effective if it can be demonstrated that 1) those in compact cities do not necessarily have a preference for more physical activity, and 2) that current active commuting is not explained by unobserved characteristics that may be the true source of a lower body mass index (BMI). Daily time-use diaries are used in combination with geographical characteristics of where respondents live and work to test 1) whether residents of more compact settlements are characterized by higher activity levels; and 2) whether residents of more compact settlements are more likely to bike or walk to work. An endogenous treatment model of active commuting allows testing whether reductions in BMI associated with walking or biking to work are in fact attributable to that activity or are more strongly associated with unobserved characteristics of these active commuters. The analysis of general activity levels confirms that residents of more compact cities do not expend more energy than residents of more sprawling cities, indicating that those in compact cities do not necessarily have a preference for more physical activity. The endogenous treatment model is consistent with walking or biking to work having an independent effect on BMI, as unobserved factors that contribute to a higher likelihood of active commuting are not associated with lower BMI. Despite evidence that more compact settlement patterns enable active commuting, only a small share of workers in these areas choose to walk or bike to work. In general, the activity level of residents in more compact cities and residents in more sprawling areas is very similar. But, there is a robust association between active commuting and lower body mass index that is not explained by unobserved attributes or preferences suggests that policies to promote active commuting may be effective. In particular, active commuting has a greater effect on BMI. Consequently, compact settlement appears to be an effective infrastructure for promoting more active lifestyles. The policy challenge is finding ways to ensure that this infrastructure is more widely utilized.

Can Walking or Biking to Work Really Make a Difference? Compact Development, Observed Commuter Choice and Body Mass Index

PubMed Central

Wojan, Timothy R.; Hamrick, Karen S.

2015-01-01

Objectives Promoting active commuting is viewed as one strategy to increase physical activity and improve the energy balance of more sedentary individuals thereby improving health outcomes. However, the potential effectiveness of promotion policies may be seriously undermined by the endogenous choice of commute mode. Policy to promote active commuting will be most effective if it can be demonstrated that 1) those in compact cities do not necessarily have a preference for more physical activity, and 2) that current active commuting is not explained by unobserved characteristics that may be the true source of a lower body mass index (BMI). Methods Daily time-use diaries are used in combination with geographical characteristics of where respondents live and work to test 1) whether residents of more compact settlements are characterized by higher activity levels; and 2) whether residents of more compact settlements are more likely to bike or walk to work. An endogenous treatment model of active commuting allows testing whether reductions in BMI associated with walking or biking to work are in fact attributable to that activity or are more strongly associated with unobserved characteristics of these active commuters. Results The analysis of general activity levels confirms that residents of more compact cities do not expend more energy than residents of more sprawling cities, indicating that those in compact cities do not necessarily have a preference for more physical activity. The endogenous treatment model is consistent with walking or biking to work having an independent effect on BMI, as unobserved factors that contribute to a higher likelihood of active commuting are not associated with lower BMI. Conclusions Despite evidence that more compact settlement patterns enable active commuting, only a small share of workers in these areas choose to walk or bike to work. In general, the activity level of residents in more compact cities and residents in more sprawling areas is very similar. But, there is a robust association between active commuting and lower body mass index that is not explained by unobserved attributes or preferences suggests that policies to promote active commuting may be effective. In particular, active commuting has a greater effect on BMI. Consequently, compact settlement appears to be an effective infrastructure for promoting more active lifestyles. The policy challenge is finding ways to ensure that this infrastructure is more widely utilized. PMID:26154176

Change in commute mode and body-mass index: prospective, longitudinal evidence from UK Biobank.

PubMed

Flint, Ellen; Webb, Elizabeth; Cummins, Steven

2016-12-01

Insufficient physical activity is a determinant of obesity and cardiovascular disease. Active travel to work has declined in high-income countries in recent decades. We aimed to determine which socioeconomic and demographic characteristics predicted switching to or from active commuting, whether switching from passive to active commuting (or the reverse) independently predicts change in objectively measured body-mass index (BMI), and to ascertain whether any association is attenuated by socioeconomic, demographic, or behavioural factors. This study used longitudinal data from UK Biobank. Baseline data collection occurred at 22 centres between March, 2006, and July, 2010, with a repeat assessment at one centre (Stockport) between August, 2012, and June, 2013, for a subset of these participants. Height and weight were objectively measured at both timepoints. We included individuals present at both timepoints with complete data in the analytic sample. Participants were aged 40-69 years and commuted from home to a workplace on a regular basis at both baseline and follow-up. Two exposures were investigated: transition from car commuting to active or public transport commuting and transition from active or public transport to car commuting. Change in BMI between baseline and repeat assessment was the outcome of interest, assessed with bivariate and multivariate logistic regression models. 502 656 individuals provided baseline data, with 20 346 participating in the repeat assessment after a median of 4·4 years (IQR 3·7-4·9). 5861 individuals were present at both timepoints and had complete data for all analytic variables. Individuals who transitioned from car commuting at baseline to active or public transportation modes at follow-up had a decrease in BMI of -0·30 kg/m 2 (95% CI -0·47 to -0·13; p=0·0005). Conversely, individuals who transitioned from active commuting at baseline to car commuting at follow-up had a BMI increase of 0·32 kg/m 2 (0·13 to 0·50; p=0·008). These effects were not attenuated by adjustment for hypothesised confounders. Change in household income emerged as a determinant of commute mode transitions. Incorporation of increased levels of physical activity as part of the commute to work could reduce obesity among middle-aged adults in the UK. UK Medical Research Council.

Study of the generator/motor operation of induction machines in a high frequency link space power system

NASA Technical Reports Server (NTRS)

Lipo, Thomas A.; Sood, Pradeep K.

1987-01-01

Static power conversion systems have traditionally utilized dc current or voltage source links for converting power from one ac or dc form to another since it readily achieves the temporary energy storage required to decouple the input from the output. Such links, however, result in bulky dc capacitors and/or inductors and lead to relatively high losses in the converters due to stresses on the semiconductor switches. The feasibility of utilizing a high frequency sinusoidal voltage link to accomplish the energy storage and decoupling function is examined. In particular, a type of resonant six pulse bridge interface converter is proposed which utilizes zero voltage switching principles to minimize switching losses and uses an easy to implement technique for pulse density modulation to control the amplitude, frequency, and the waveshape of the synthesized low frequency voltage or current. Adaptation of the proposed topology for power conversion to single-phase ac and dc voltage or current outputs is shown to be straight forward. The feasibility of the proposed power circuit and control technique for both active and passive loads are verified by means of simulation and experiment.

The new technological solution for the JT-60SA quench protection circuits

NASA Astrophysics Data System (ADS)

Gaio, E.; Maistrello, A.; Novello, L.; Matsukawa, M.; Perna, M.; Ferro, A.; Yamauchi, K.; Piovan, R.

2018-07-01

An advanced technology has been developed and employed for the main circuit breakers (CB) of the quench protection circuits (QPC) of the superconducting coils of JT-60SA: it consists in a Hybrid mechanical-static CB (HCB) composed of a mechanical Bypass switch (BPS) for conducting the continuous current, in parallel to a static circuit breaker (SCB) based on integrated gate commutated thyristor (IGCT) for current interruption. It was the result of a R&D program carried out since 2006 to identify innovative solutions for the interruption of high dc current, able to improve the maintainability and availability of the CB. The HCB developed for the JT-60SA QPC is the first realization of a dc circuit breaker based on this design approach for interrupting current of some tens of kA with reapplied voltage of some kV. It also represents the first application of hybrid technology with IGCT for protection of superconducting magnets in fusion experiments. The paper aims at giving a comprehensive overview of the main R&D activities devoted to the development of this new technological approach; then, the key aspects of the design, manufacturing and testing of the QPCs for JT-60SA, successfully completed in Naka Site in summer 2015 are presented. Finally, the significance of this research is discussed and the possible future developments, in particular in view of DEMO fusion reactor, are outlined.

A Hybrid LCC-VSC HVDC Transmission System Supplying a Passive Load

NASA Astrophysics Data System (ADS)

Kotb, Omar

High Voltage Direct Current (HVDC) transmission systems continue to be an excellent asset in modern power systems, mainly for their ability to overcome the problems of AC transmission, such as the interconnection of asynchronous grids, stability of long transmission lines, and use of long cables for power transmission. In the past 20 years, Voltage Source Converter (VSC)-HVDC transmission systems were developed and installed in many projects, thereby adding more operational benefits to DC transmission option, such as high controllability, ability to supply weak networks, and reduced converter reactive power demand. Nevertheless, VSC-HVDC transmission suffers from the disadvantages of high losses and cost. In this research, a hybrid HVDC employing a Line Commutated Converter (LCC) as rectifier and a VSC as inverter is used to supply a passive network through a DC cable. The hybrid system is best suited for unidirectional power transmission scenarios, such as power transmission to islands and remote load centers, where the construction of new transmission lines is prohibitively expensive. Control modes for the rectifier and inverter are selected and implemented using Proportional Integral (PI) controllers. Special control schemes are developed for abnormal operating conditions such as starting at light load and recovering from AC network faults. The system performance under steady state and transient conditions is investigated by EMTP-RV simulations. The results show the feasibility of the hybrid system.

Blocks in cycles and k-commuting permutations.

PubMed

Moreno, Rutilo; Rivera, Luis Manuel

2016-01-01

We introduce and study k -commuting permutations. One of our main results is a characterization of permutations that k -commute with a given permutation. Using this characterization, we obtain formulas for the number of permutations that k -commute with a permutation [Formula: see text], for some cycle types of [Formula: see text]. Our enumerative results are related with integer sequences in "The On-line Encyclopedia of Integer Sequences", and in some cases provide new interpretations for such sequences.

The Fort Collins Commuter Study: Impact of route type and transport mode on personal exposure to multiple air pollutants.

PubMed

Good, Nicholas; Mölter, Anna; Ackerson, Charis; Bachand, Annette; Carpenter, Taylor; Clark, Maggie L; Fedak, Kristen M; Kayne, Ashleigh; Koehler, Kirsten; Moore, Brianna; L'Orange, Christian; Quinn, Casey; Ugave, Viney; Stuart, Amy L; Peel, Jennifer L; Volckens, John

2016-06-01

Traffic-related air pollution is associated with increased mortality and morbidity, yet few studies have examined strategies to reduce individual exposure while commuting. The present study aimed to quantify how choice of mode and route type affects personal exposure to air pollutants during commuting. We analyzed within-person difference in exposures to multiple air pollutants (black carbon (BC), carbon monoxide (CO), ultrafine particle number concentration (PNC), and fine particulate matter (PM2.5)) during commutes between the home and workplace for 45 participants. Participants completed 8 days of commuting by car and bicycle on direct and alternative (reduced traffic) routes. Mean within-person exposures to BC, PM2.5, and PNC were higher when commuting by cycling than when driving, but mean CO exposure was lower when cycling. Exposures to CO and BC were reduced when commuting along alternative routes. When cumulative exposure was considered, the benefits from cycling were attenuated, in the case of CO, or exacerbated, in the case of particulate exposures, owing to the increased duration of the commute. Although choice of route can reduce mean exposure, the effect of route length and duration often offsets these reductions when cumulative exposure is considered. Furthermore, increased ventilation rate when cycling may result in a more harmful dose than inhalation at a lower ventilation rate.

Commutability of the First World Health Organization International Standard for Human Cytomegalovirus

PubMed Central

Preiksaitis, J.; Tong, Y.; Pang, X.; Sun, Y.; Tang, L.; Cook, L.; Pounds, S.; Fryer, J.; Caliendo, A. M.

2015-01-01

Quantitative detection of cytomegalovirus (CMV) DNA has become a standard part of care for many groups of immunocompromised patients; recent development of the first WHO international standard for human CMV DNA has raised hopes of reducing interlaboratory variability of results. Commutability of reference material has been shown to be necessary if such material is to reduce variability among laboratories. Here we evaluated the commutability of the WHO standard using 10 different real-time quantitative CMV PCR assays run by eight different laboratories. Test panels, including aliquots of 50 patient samples (40 positive samples and 10 negative samples) and lyophilized CMV standard, were run, with each testing center using its own quantitative calibrators, reagents, and nucleic acid extraction methods. Commutability was assessed both on a pairwise basis and over the entire group of assays, using linear regression and correspondence analyses. Commutability of the WHO material differed among the tests that were evaluated, and these differences appeared to vary depending on the method of statistical analysis used and the cohort of assays included in the analysis. Depending on the methodology used, the WHO material showed poor or absent commutability with up to 50% of assays. Determination of commutability may require a multifaceted approach; the lack of commutability seen when using the WHO standard with several of the assays here suggests that further work is needed to bring us toward true consensus. PMID:26269622

Asymptotic Analysis of the Ponzano-Regge Model with Non-Commutative Metric Boundary Data

NASA Astrophysics Data System (ADS)

Oriti, Daniele; Raasakka, Matti

2014-06-01

We apply the non-commutative Fourier transform for Lie groups to formulate the non-commutative metric representation of the Ponzano-Regge spin foam model for 3d quantum gravity. The non-commutative representation allows to express the amplitudes of the model as a first order phase space path integral, whose properties we consider. In particular, we study the asymptotic behavior of the path integral in the semi-classical limit. First, we compare the stationary phase equations in the classical limit for three different non-commutative structures corresponding to the symmetric, Duflo and Freidel-Livine-Majid quantization maps. We find that in order to unambiguously recover discrete geometric constraints for non-commutative metric boundary data through the stationary phase method, the deformation structure of the phase space must be accounted for in the variational calculus. When this is understood, our results demonstrate that the non-commutative metric representation facilitates a convenient semi-classical analysis of the Ponzano-Regge model, which yields as the dominant contribution to the amplitude the cosine of the Regge action in agreement with previous studies. We also consider the asymptotics of the SU(2) 6j-symbol using the non-commutative phase space path integral for the Ponzano-Regge model, and explain the connection of our results to the previous asymptotic results in terms of coherent states.

Simulation of Population-Based Commuter Exposure to NO2 Using Different Air Pollution Models

PubMed Central

Ragettli, Martina S.; Tsai, Ming-Yi; Braun-Fahrländer, Charlotte; de Nazelle, Audrey; Schindler, Christian; Ineichen, Alex; Ducret-Stich, Regina E.; Perez, Laura; Probst-Hensch, Nicole; Künzli, Nino; Phuleria, Harish C.

2014-01-01

We simulated commuter routes and long-term exposure to traffic-related air pollution during commute in a representative population sample in Basel (Switzerland), and evaluated three air pollution models with different spatial resolution for estimating commute exposures to nitrogen dioxide (NO2) as a marker of long-term exposure to traffic-related air pollution. Our approach includes spatially and temporally resolved data on actual commuter routes, travel modes and three air pollution models. Annual mean NO2 commuter exposures were similar between models. However, we found more within-city and within-subject variability in annual mean (±SD) NO2 commuter exposure with a high resolution dispersion model (40 ± 7 µg m−3, range: 21–61) than with a dispersion model with a lower resolution (39 ± 5 µg m−3; range: 24–51), and a land use regression model (41 ± 5 µg m−3; range: 24–54). Highest median cumulative exposures were calculated along motorized transport and bicycle routes, and the lowest for walking. For estimating commuter exposure within a city and being interested also in small-scale variability between roads, a model with a high resolution is recommended. For larger scale epidemiological health assessment studies, models with a coarser spatial resolution are likely sufficient, especially when study areas include suburban and rural areas. PMID:24823664

The Fort Collins Commuter Study: Impact of route type and transport mode on personal exposure to multiple air pollutants

PubMed Central

Good, Nicholas; Mölter, Anna; Ackerson, Charis; Bachand, Annette; Carpenter, Taylor; Clark, Maggie L; Fedak, Kristen M; Kayne, Ashleigh; Koehler, Kirsten; Moore, Brianna; L'Orange, Christian; Quinn, Casey; Ugave, Viney; Stuart, Amy L; Peel, Jennifer L; Volckens, John

2016-01-01

Traffic-related air pollution is associated with increased mortality and morbidity, yet few studies have examined strategies to reduce individual exposure while commuting. The present study aimed to quantify how choice of mode and route type affects personal exposure to air pollutants during commuting. We analyzed within-person difference in exposures to multiple air pollutants (black carbon (BC), carbon monoxide (CO), ultrafine particle number concentration (PNC), and fine particulate matter (PM2.5)) during commutes between the home and workplace for 45 participants. Participants completed 8 days of commuting by car and bicycle on direct and alternative (reduced traffic) routes. Mean within-person exposures to BC, PM2.5, and PNC were higher when commuting by cycling than when driving, but mean CO exposure was lower when cycling. Exposures to CO and BC were reduced when commuting along alternative routes. When cumulative exposure was considered, the benefits from cycling were attenuated, in the case of CO, or exacerbated, in the case of particulate exposures, owing to the increased duration of the commute. Although choice of route can reduce mean exposure, the effect of route length and duration often offsets these reductions when cumulative exposure is considered. Furthermore, increased ventilation rate when cycling may result in a more harmful dose than inhalation at a lower ventilation rate. PMID:26507004

Daily impaired detachment and short-term effects of impaired sleep quality on next-day commuting near-accidents - an ambulatory diary study.

PubMed

Pereira, Diana; Bucher, Sarah; Elfering, Achim

2016-08-01

This study investigated the short-term effects of daily recovery, that is, impaired psychological detachment from work and various actigraphical indicators of sleep quality, on near-accidents when commuting to work the next morning. Furthermore, the mediating effect of actigraphically assessed sleep quality on the relationship between impaired psychological detachment from work and near-accidents when commuting to work was analysed. Fifty-six full-time employees of a Swiss assurance company participated in the one-week study. Multilevel analyses revealed that impaired detachment was highly related to a decrease in sleep duration. Furthermore, impaired daily recovery processes, such as impaired psychological detachment from work and disturbed sleep quality, were related to commuting near-accidents. Impaired sleep quality mediated the effect of impaired psychological detachment from work on these near-accidents. Our results show that occupational safety interventions should address both impaired psychological detachment from work and sleep quality in order to prevent near accidents when commuting to work. Practitioner Summary: Commuting accidents occur frequently and have detrimental effects on employees, organisations and society. This study shows that daily lack of recovery, that is, impaired psychological detachment and impaired sleep quality, is related to near-accidents when commuting to work the next morning. Primary prevention of commuting accidents should therefore address daily lack of recovery.

High strength undiffused brushless machine and method

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hsu, John S

2009-04-14

A method and apparatus in which a rotor (11) and a stator (17) define a radial air gap (20) for receiving AC flux and at least one DC excitation coil (23, 24) positioned near the stator end turn to produce DC flux in axial air gaps (21, 22) additive to the AC flux. Side magnets (16) and flux-guiding magnets (14) are provided as boundaries separating the side poles (12a, 12b) of opposite polarity from other portions of the rotor (11) and from each other to define PM poles (12a, 12b) for conveying the DC flux to or from the primarymore » air gap (20) and for inhibiting flux from leaking from said pole portions prior to reaching the primary air gap (20). Side magnets (16), side poles (12a and 12b), flux-guiding magnets (14), ferromagnetic end plates (11c), non-magnetic end plates (12c), and ring bands (37) are optionally provided for performance improvement.« less

Bikeability and methodological issues using the active commuting route environment scale (ACRES) in a metropolitan setting.

PubMed

Wahlgren, Lina; Schantz, Peter

2011-01-17

Route environments can positively influence people's active commuting and thereby contribute to public health. The Active Commuting Route Environment Scale (ACRES) was developed to study active commuters' perceptions of their route environments. However, bicycle commuters represent a small portion of the population in many cities and thus are difficult to study using population-based material. Therefore, the aim of this study is to expand the state of knowledge concerning the criterion-related validity of the ACRES and the representativity using an advertisement-recruited sample. Furthermore, by comparing commuting route environment profiles of inner urban and suburban areas, we provide a novel basis for understanding the relationship between environment and bikeability. Bicycle commuters from Greater Stockholm, Sweden, advertisement- (n = 1379) and street-recruited (n = 93), responded to the ACRES. Traffic planning and environmental experts from the Municipality of Stockholm (n = 24) responded to a modified version of the ACRES. The criterion-related validity assessments were based on whether or not differences between the inner urban and the suburban route environments, as indicated by the experts and by four existing objective measurements, were reflected by differences in perceptions of these environments. Comparisons of ratings between advertisement- and street-recruited participants were used for the assessments of representativity. Finally, ratings of inner urban and suburban route environments were used to evaluate commuting route environment profiles. Differences in ratings of the inner urban and suburban route environments by the advertisement-recruited participants were in accord with the existing objective measurements and corresponded reasonably well with those of the experts. Overall, there was a reasonably good correspondence between the advertisement- and street-recruited participants' ratings. Distinct differences in commuting route environment profiles were noted between the inner urban and suburban areas. Suburban route environments were rated as safer and more stimulating for bicycle-commuting than the inner urban ones. In general, the findings applied to both men and women. The overall results show: considerable criterion-related validity of the ACRES; ratings of advertisement-recruited participants mirroring those of street-recruited participants; and a higher degree of bikeability in the suburban commuting route environments than in the inner urban ones.

A variable-mode stator consequent pole memory machine

NASA Astrophysics Data System (ADS)

Yang, Hui; Lyu, Shukang; Lin, Heyun; Zhu, Z. Q.

2018-05-01

In this paper, a variable-mode concept is proposed for the speed range extension of a stator-consequent-pole memory machine (SCPMM). An integrated permanent magnet (PM) and electrically excited control scheme is utilized to simplify the flux-weakening control instead of relatively complicated continuous PM magnetization control. Due to the nature of memory machine, the magnetization state of low coercive force (LCF) magnets can be easily changed by applying either a positive or negative current pulse. Therefore, the number of PM poles may be changed to satisfy the specific performance requirement under different speed ranges, i.e. the machine with all PM poles can offer high torque output while that with half PM poles provides wide constant power range. In addition, the SCPMM with non-magnetized PMs can be considered as a dual-three phase electrically excited reluctance machine, which can be fed by an open-winding based dual inverters that provide direct current (DC) bias excitation to further extend the speed range. The effectiveness of the proposed variable-mode operation for extending its operating region and improving the system reliability is verified by both finite element analysis (FEA) and experiments.

The commuter rail circulator network design problem : formulation, solution methods, and applications

DOT National Transportation Integrated Search

2007-08-01

Commuter rail is increasingly popular as a means to introduce rail transportation to metropolitan transportation systems. The long-term benefits of commuter rail include the addition of capacity to the transportation system, providing a quality commu...

41 CFR 302-7.102 - How is the mileage distance determined under the commuted rate method?

Code of Federal Regulations, 2010 CFR

2010-07-01

... PROPERTY 7-TRANSPORTATION AND TEMPORARY STORAGE OF HOUSEHOLD GOODS AND PROFESSIONAL BOOKS, PAPERS, AND EQUIPMENT (PBP&E) Commuted Rate § 302-7.102 How is the mileage distance determined under the commuted rate...

Accident Report of Chicago Metra Derailment on September 17, 2005.

DOT National Transportation Integrated Search

2015-10-01

On Saturday, September 17, 2005, Metra commuter train 504 was heading north from Joliet to Chicago on the Rock Island District Line operated by the Northeast Illinois Regional Commuter Railroad Corporation, which is the commuter rail system that serv...

Real-time rideshare matching problem.

DOT National Transportation Integrated Search

2010-01-01

According to the Commuting in America report, more than 88% of American workers commute to work in private vehicles, which accounts for a daily sum of 166 million miles. The report also indicates that more than 76% of the commuters drive alone, resul...

Improved Hierarchical Optimization-Based Classification of Hyperspectral Images Using Shape Analysis

NASA Technical Reports Server (NTRS)

Tarabalka, Yuliya; Tilton, James C.

2012-01-01

A new spectral-spatial method for classification of hyperspectral images is proposed. The HSegClas method is based on the integration of probabilistic classification and shape analysis within the hierarchical step-wise optimization algorithm. First, probabilistic support vector machines classification is applied. Then, at each iteration two neighboring regions with the smallest Dissimilarity Criterion (DC) are merged, and classification probabilities are recomputed. The important contribution of this work consists in estimating a DC between regions as a function of statistical, classification and geometrical (area and rectangularity) features. Experimental results are presented on a 102-band ROSIS image of the Center of Pavia, Italy. The developed approach yields more accurate classification results when compared to previously proposed methods.

WASTE PACKAGE REMEDIATION SYSTEM DESCRIPTION DOCUMENT

DOE Office of Scientific and Technical Information (OSTI.GOV)

N.D. Sudan

2000-06-22

The Waste Package Remediation System remediates waste packages (WPs) and disposal containers (DCs) in one of two ways: preparation of rejected DC closure welds for repair or opening of the DC/WP. DCs are brought to the Waste Package Remediation System for preparation of rejected closure welds if testing of the closure weld by the Disposal Container Handling System indicates an unacceptable, but repairable, welding flaw. DC preparation of rejected closure welds will require removal of the weld in such a way that the Disposal Container Handling System may resume and complete the closure welding process. DCs/WPs are brought to themore » Waste Package Remediation System for opening if the Disposal Container Handling System testing of the DC closure weld indicates an unrepairable welding flaw, or if a WP is recovered from the subsurface repository because suspected damage to the WP or failure of the WP has occurred. DC/WP opening will require cutting of the DC/WP such that a temporary seal may be installed and the waste inside the DC/WP removed by another system. The system operates in a Waste Package Remediation System hot cell located in the Waste Handling Building that has direct access to the Disposal Container Handling System. One DC/WP at a time can be handled in the hot cell. The DC/WP arrives on a transfer cart, is positioned within the cell for system operations, and exits the cell without being removed from the cart. The system includes a wide variety of remotely operated components including a manipulator with hoist and/or jib crane, viewing systems, machine tools for opening WPs, and equipment used to perform pressure and gas composition sampling. Remotely operated equipment is designed to facilitate DC/WP decontamination and hot cell equipment maintenance, and interchangeable components are provided where appropriate. The Waste Package Remediation System interfaces with the Disposal Container Handling System for the receipt and transport of WPs and DCs. The Waste Handling Building System houses the system, and provides the facility, safety, and auxiliary systems required to support operations. The system receives power from the Waste Handling Building Electrical System. The system also interfaces with the various DC systems.« less

Using alternatives to the car and risk of all-cause, cardiovascular and cancer mortality.

PubMed

Panter, Jenna; Mytton, Oliver; Sharp, Stephen; Brage, Søren; Cummins, Steven; Laverty, Anthony A; Wijndaele, Katrien; Ogilvie, David

2018-05-21

To investigate the associations between using alternatives to the car which are more active for commuting and non-commuting purposes, and morbidity and mortality. We conducted a prospective study using data from 3 58 799 participants, aged 37-73 years, from UK Biobank. Commute and non-commute travel were assessed at baseline in 2006-2010. We classified participants according to whether they relied exclusively on the car or used alternative modes of transport that were more active at least some of the time. The main outcome measures were incident cardiovascular disease (CVD) and cancer, and CVD, cancer and all-cause mortality. We excluded events in the first 2 years and conducted analyses separately for those who regularly commuted and those who did not. In maximally adjusted models, regular commuters with more active patterns of travel on the commute had a lower risk of incident (HR 0.89, 95% CI 0.79 to 1.00) and fatal (HR 0.70, 95% CI 0.51 to 0.95) CVD. Those regular commuters who also had more active patterns of non-commute travel had an even lower risk of fatal CVD (HR 0.57, 95% CI 0.39 to 0.85). Among those who were not regular commuters, more active patterns of travel were associated with a lower risk of all-cause mortality (HR 0.92, 95% CI 0.86 to 0.99). More active patterns of travel were associated with a reduced risk of incident and fatal CVD and all-cause mortality in adults. This is an important message for clinicians advising people about how to be physically active and reduce their risk of disease. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Individual, employment and psychosocial factors influencing walking to work: Implications for intervention design

PubMed Central

Esliger, Dale W.; Taylor, Ian M.; Sherar, Lauren B.

2017-01-01

Background Promoting walking for the journey to and from work (commuter walking) is a potential strategy for increasing physical activity. Understanding the factors influencing commuter walking is important for identifying target groups and designing effective interventions. This study aimed to examine individual, employment-related and psychosocial factors associated with commuter walking and to discuss the implications for targeting and future design of interventions. Methods 1,544 employees completed a baseline survey as part of the ‘Walking Works’ intervention project (33.4% male; 36.3% aged <30 years). Multivariate logistic regression was used to examine the associations of individual (age, ethnic group, educational qualifications, number of children <16 and car ownership), employment-related (distance lived from work, free car parking at work, working hours, working pattern and occupation) and psychosocial factors (perceived behavioural control, intention, social norms and social support from work colleagues) with commuter walking. Results Almost half of respondents (n = 587, 49%) were classified as commuter walkers. Those who were aged <30 years, did not have a car, had no free car parking at work, were confident of including some walking or intended to walk to or from work on a regular basis, and had support from colleagues for walking were more likely to be commuter walkers. Those who perceived they lived too far away from work to walk, thought walking was less convenient than using a car for commuting, did not have time to walk, needed a car for work or had always travelled the same way were less likely to be commuter walkers. Conclusions A number of individual, employment-related and psychosocial factors were associated with commuter walking. Target groups for interventions to promote walking to and from work may include those in older age groups and those who own or have access to a car. Multi-level interventions targeting individual level behaviour change, social support within the workplace and organisational level travel policies may be required in order to promote commuter walking. PMID:28182714

NYPA/TH!NK Clean Commute Program Final Report - Inception through December 2004

DOE Office of Scientific and Technical Information (OSTI.GOV)

James Francfort; Don Karner

The Clean Commute Program uses TH!NK city electric vehicles from Ford Motor Company’s electric vehicle group, TH!NK Mobility, to demonstrate the feasibility of using electric transportation in urban applications. Suburban New York City railroad commuters use the TH!NK city vehicles to commute from their private residences to railroad stations, where they catch commuter trains into New York City. Electric vehicle charging infrastructure for the TH!NK city vehicles is located at the commuters’ private residences as well as seven train stations. Ford leased at total of 97 TH!NK city electric vehicles to commuters from Westchester, Putnam, Rockland, Queens, Nassau, and Suffolkmore » counties for $199 per month. First Clean Commute Program vehicle deliveries occurred late in 2001, with data collection commencing in February 2002. Through May, 2004, 24 of the lessees have returned their vehicles to Ford and no longer participate in the Clean Commute Program. Reasons given for leaving the Program include relocation out of the Program area, change in employment status, change in commuting status, and, in a few cases, dissatisfaction with the vehicle. Additionally, 13 vehicles were returned to Ford when the lease was completed. In August 2002, Ford announced that it was ceasing production of the TH!NK city and would not extend any TH!NK city leases. Mileage accumulation dropped in the last quarter of the program as vehicle leases were returned to Ford. The impact of the program overall was significant as participants in the Clean Commute Program drove their vehicles over 406,074 miles, avoiding the use of over 18,887 gallons of gasoline. During the active portion of the program, the TH!NK city vehicles were driven an average of between 180 and 230 miles per month. Over 95% of all trips taken with the TH!NK city vehicles replaced trips previously taken in gasoline vehicles. This report covers the period from Program inception through December 2004.« less

Individual, employment and psychosocial factors influencing walking to work: Implications for intervention design.

PubMed

Adams, Emma J; Esliger, Dale W; Taylor, Ian M; Sherar, Lauren B

2017-01-01

Promoting walking for the journey to and from work (commuter walking) is a potential strategy for increasing physical activity. Understanding the factors influencing commuter walking is important for identifying target groups and designing effective interventions. This study aimed to examine individual, employment-related and psychosocial factors associated with commuter walking and to discuss the implications for targeting and future design of interventions. 1,544 employees completed a baseline survey as part of the 'Walking Works' intervention project (33.4% male; 36.3% aged <30 years). Multivariate logistic regression was used to examine the associations of individual (age, ethnic group, educational qualifications, number of children <16 and car ownership), employment-related (distance lived from work, free car parking at work, working hours, working pattern and occupation) and psychosocial factors (perceived behavioural control, intention, social norms and social support from work colleagues) with commuter walking. Almost half of respondents (n = 587, 49%) were classified as commuter walkers. Those who were aged <30 years, did not have a car, had no free car parking at work, were confident of including some walking or intended to walk to or from work on a regular basis, and had support from colleagues for walking were more likely to be commuter walkers. Those who perceived they lived too far away from work to walk, thought walking was less convenient than using a car for commuting, did not have time to walk, needed a car for work or had always travelled the same way were less likely to be commuter walkers. A number of individual, employment-related and psychosocial factors were associated with commuter walking. Target groups for interventions to promote walking to and from work may include those in older age groups and those who own or have access to a car. Multi-level interventions targeting individual level behaviour change, social support within the workplace and organisational level travel policies may be required in order to promote commuter walking.

Front Range commuter bus study. Phase 2 : final report

DOT National Transportation Integrated Search

2003-10-01

The goal of Front Range Commuter Bus service would be to provide a commuter bus service that would operate seamlessly with local transit systems and would be run through a partnership with each of the cities, CDOT, RTD and participating private provi...

Real-time optimization of passenger collection for commuter rail systems.

DOT National Transportation Integrated Search

2014-09-01

Commuter rail systems are being introduced into many urban areas as an alternative mode to automobiles : for commuting trips. The shift from the auto mode to rail mode is anticipated to greatly help alleviate : traffic congestion in urban road networ...

The physical environment and health-enhancing activity during the school commute: global positioning system, geographical information systems and accelerometry.

PubMed

McMinn, David; Oreskovic, Nicolas M; Aitkenhead, Matt J; Johnston, Derek W; Murtagh, Shemane; Rowe, David A

2014-05-01

Active school travel is in decline. An understanding of the potential determinants of health-enhancing physical activity during the school commute may help to inform interventions aimed at reversing these trends. The purpose of this study was to identify the physical environmental factors associated with health-enhancing physical activity during the school commute. Data were collected in 2009 on 166 children commuting home from school in Scotland. Data on location and physical activity were measured using global positioning systems (GPS) and accelerometers, and mapped using geographical information systems (GIS). Multi-level logistic regression models accounting for repeated observations within participants were used to test for associations between each land-use category (road/track/path, other man-made, greenspace, other natural) and moderate-to-vigorous physical activity (MVPA). Thirty-nine children provided 2,782 matched data points. Over one third (37.1%) of children's school commute time was spent in MVPA. Children commuted approximately equal amounts of time via natural and man-made land-uses (50.2% and 49.8% respectively). Commuting via road/track/path was associated with increased likelihood of MVPA (Exp(B)=1.23, P <0.05), but this association was not seen for commuting via other manmade land-uses. No association was noted between greenspace use and MVPA, but travelling via other natural land-uses was associated with lower odds of MVPA (Exp(B)=0.32, P <0.05). Children spend equal amounts of time commuting to school via man-made and natural land-uses, yet man-made transportation route infrastructure appears to provide greater opportunities for achieving health-enhancing physical activity levels.

What interventions increase commuter cycling? A systematic review.

PubMed

Stewart, Glenn; Anokye, Nana Kwame; Pokhrel, Subhash

2015-08-14

To identify interventions that will increase commuter cycling. All settings where commuter cycling might take place. Adults (aged 18+) in any country. Individual, group or environmental interventions including policies and infrastructure. A wide range of 'changes in commuter cycling' indicators, including frequency of cycling, change in workforce commuting mode, change in commuting population transport mode, use of infrastructure by defined populations and population modal shift. 12 studies from 6 countries (6 from the UK, 2 from Australia, 1 each from Sweden, Ireland, New Zealand and the USA) met the inclusion criteria. Of those, 2 studies were randomised control trials and the remainder preintervention and postintervention studies. The majority of studies (n=7) evaluated individual-based or group-based interventions and the rest environmental interventions. Individual-based or group-based interventions in 6/7 studies were found to increase commuter cycling of which the effect was significant in only 3/6 studies. Environmental interventions, however, had small but positive effects in much larger but more difficult to define populations. Almost all studies had substantial loss to follow-up. Despite commuter cycling prevalence varying widely between countries, robust evidence of what interventions will increase commuter cycling in low cycling prevalence nations is sparse. Wider environmental interventions that make cycling conducive appear to reach out to hard to define but larger populations. This could mean that environmental interventions, despite their small positive effects, have greater public health significance than individual-based or group-based measures because those interventions encourage a larger number of people to integrate physical activity into their everyday lives. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

What interventions increase commuter cycling? A systematic review

PubMed Central

Stewart, Glenn; Anokye, Nana Kwame; Pokhrel, Subhash

2015-01-01

Objective To identify interventions that will increase commuter cycling. Setting All settings where commuter cycling might take place. Participants Adults (aged 18+) in any country. Interventions Individual, group or environmental interventions including policies and infrastructure. Primary and secondary outcome measures A wide range of ‘changes in commuter cycling’ indicators, including frequency of cycling, change in workforce commuting mode, change in commuting population transport mode, use of infrastructure by defined populations and population modal shift. Results 12 studies from 6 countries (6 from the UK, 2 from Australia, 1 each from Sweden, Ireland, New Zealand and the USA) met the inclusion criteria. Of those, 2 studies were randomised control trials and the remainder preintervention and postintervention studies. The majority of studies (n=7) evaluated individual-based or group-based interventions and the rest environmental interventions. Individual-based or group-based interventions in 6/7 studies were found to increase commuter cycling of which the effect was significant in only 3/6 studies. Environmental interventions, however, had small but positive effects in much larger but more difficult to define populations. Almost all studies had substantial loss to follow-up. Conclusions Despite commuter cycling prevalence varying widely between countries, robust evidence of what interventions will increase commuter cycling in low cycling prevalence nations is sparse. Wider environmental interventions that make cycling conducive appear to reach out to hard to define but larger populations. This could mean that environmental interventions, despite their small positive effects, have greater public health significance than individual-based or group-based measures because those interventions encourage a larger number of people to integrate physical activity into their everyday lives. PMID:26275902

Planning for rotorcraft and commuter air transportationn

NASA Technical Reports Server (NTRS)

Stockwell, W. L.; Stowers, J.

1981-01-01

Community planning needs, criteria, and other considerations such as intermodal coordination and regulatory requirements, for rotorcraft and fixed wing commuter air transportation were identified. A broad range of community planning guidelines, issues, and information which can be used to: (1) direct anticipated aircraft technological improvements; (2) assist planners in identifying and evaluating the opportunities and tradeoffs presented by rotorcraft and commuter aircraft options relative to other modes; and (3) increase communication between aircraft technologists and planners for the purpose of on going support in capitalizing on rotorcraft and commuter air opportunities are provided. The primary tool for identifying and analyzing planning requirements was a detailed questionnaire administered to a selected sample of 55 community planners and other involved in planning for helicopters and commuter aviation.

Quantitative Assessment of Commutability for Clinical Viral Load Testing Using a Digital PCR-Based Reference Standard

PubMed Central

Tang, L.; Sun, Y.; Buelow, D.; Gu, Z.; Caliendo, A. M.; Pounds, S.

2016-01-01

Given recent advances in the development of quantitative standards, particularly WHO international standards, efforts to better understand the commutability of reference materials have been made. Existing approaches in evaluating commutability include prediction intervals and correspondence analysis; however, the results obtained from existing approaches may be ambiguous. We have developed a “deviation-from-ideal” (DFI) approach to evaluate commutability of standards and applied it to the assessment of Epstein-Bar virus (EBV) load testing in four quantitative PCR assays, treating digital PCR as a reference assay. We then discuss advantages and limitations of the DFI approach as well as experimental design to best evaluate the commutability of an assay in practice. PMID:27076654

Commutative Algebras of Toeplitz Operators in Action

NASA Astrophysics Data System (ADS)

Vasilevski, Nikolai

2011-09-01

We will discuss a quite unexpected phenomenon in the theory of Toeplitz operators on the Bergman space: the existence of a reach family of commutative C*-algebras generated by Toeplitz operators with non-trivial symbols. As it tuns out the smoothness properties of symbols do not play any role in the commutativity, the symbols can be merely measurable. Everything is governed here by the geometry of the underlying manifold, the hyperbolic geometry of the unit disk. We mention as well that the complete characterization of these commutative C*-algebras of Toeplitz operators requires the Berezin quantization procedure. These commutative algebras come with a powerful research tool, the spectral type representation for the operators under study, which permit us to answer to many important questions in the area.

Analysis of the trip costs of a traffic corridor with two entrances and one exit under car-following model

NASA Astrophysics Data System (ADS)

Tang, Tie-Qiao; Wang, Tao; Chen, Liang; Shang, Hua-Yan

2017-11-01

In this paper, we first define each commuter's first, second and third trip costs, and then apply the full velocity difference model and the VT-Micro model to explore each commuter's three trip costs and the system's corresponding total trip costs in a traffic corridor with two entrances and one exit. The numerical results show that one entrance has prominent effects on the commuter's three trip costs and the system's corresponding total trip cost and that the impacts are directly related to the commuter's departure interval at this entrance. The results can provide some suggestions for reducing the commuters' trip costs in a traffic corridor with two entrances and one exit.

Solid-state switch increases switching speed

NASA Technical Reports Server (NTRS)

Mcgowan, G. F.

1966-01-01

Solid state switch for commutating capacitors in an RC commutated network increases switching speed and extends the filtering or commutating frequency spectrum well into the kilocycle region. The switch is equivalent to the standard double- pole double-throw /DPDT/ relay and is driven from digital micrologic circuits.

Marketing Career Services to Part-Time Students.

ERIC Educational Resources Information Center

Behrens, Troy; Gordon, David E.

1996-01-01

Profiles the differences between commuter students and students at traditional resident schools and the special career-related needs of commuter students that college career centers must address. Topics discussed are the different needs of commuter students, student communication vehicles, and faculty and community communication. (SNR)

5 CFR 550.703 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-01-01

...)(1), except the government of the District of Columbia. Commuting area means the geographic area... expectations of the local community. When an employee's residence is within the standard commuting area for a work site, the work site is within the employee's commuting area. When an employee's residence is...

5 CFR 550.703 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-01-01

...)(1), except the government of the District of Columbia. Commuting area means the geographic area... expectations of the local community. When an employee's residence is within the standard commuting area for a work site, the work site is within the employee's commuting area. When an employee's residence is...

5 CFR 550.703 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-01-01

...)(1), except the government of the District of Columbia. Commuting area means the geographic area... expectations of the local community. When an employee's residence is within the standard commuting area for a work site, the work site is within the employee's commuting area. When an employee's residence is...

5 CFR 550.703 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-01-01

...)(1), except the government of the District of Columbia. Commuting area means the geographic area... expectations of the local community. When an employee's residence is within the standard commuting area for a work site, the work site is within the employee's commuting area. When an employee's residence is...

5 CFR 550.703 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-01-01

...)(1), except the government of the District of Columbia. Commuting area means the geographic area... expectations of the local community. When an employee's residence is within the standard commuting area for a work site, the work site is within the employee's commuting area. When an employee's residence is...

75 FR 13680 - Commutation of Sentence: Technical Change

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-23

... Sentence: Technical Change AGENCY: Bureau of Prisons, Justice. ACTION: Interim rule. SUMMARY: This document makes a minor technical change to the Bureau of Prisons (Bureau) regulations on sentence commutation to.... Commutation of Sentence: Technical Change This document makes a minor technical change to the Bureau...

In a bad place: Carers of patients with head and neck cancer experiences of travelling for cancer treatment.

PubMed

Balfe, Myles; Keohane, Kieran; O' Brien, Katie; Gooberman-Hill, Rachael; Maguire, Rebecca; Hanly, Paul; O' Sullivan, Eleanor; Sharp, Linda

2017-10-01

To explore the effect that treatment-related commuting has on carers of patients with head and neck cancer. Semi-structured interviews, thematically analysed, with 31 carers. Treatment-related commuting had a considerable impact on carers of patients with head and neck cancer, both in practical terms (economic costs, disruption) and also in psychological terms. Many carers of patients with head and neck cancer described becoming distressed by their commute. Some carers from large urban cities appeared to have hidden commuting burdens. Some carers respond to commuting stress by 'zoning out' or becoming 'like zombies'. Treatment-related travel for head and neck cancer can have significant practical and psychological impacts. Health professionals should be aware of the impacts that commuting can have on head and neck caregivers. Health services may be able to take practical steps, such as providing subsidized parking, to address head and neck carergivers' difficulties. Copyright © 2017 Elsevier Ltd. All rights reserved.

"It's driving her mad": Gender differences in the effects of commuting on psychological health.

PubMed

Roberts, Jennifer; Hodgson, Robert; Dolan, Paul

2011-09-01

Commuting is an important component of time use for most working people. We explore the effects of commuting time on the psychological health of men and women. We use data from the British Household Panel Survey in a fixed effects framework that includes variables known to determine psychological health, as well as factors which may provide compensation for commuting such as income, job satisfaction and housing quality. Our results show that, even after these variables are considered, commuting has an important detrimental effect on the psychological health of women, but not men, and this result is robust to numerous different specifications. We explore explanations for this gender difference and can find no evidence that it is due to women's shorter working hours or weaker occupational position. Rather women's greater sensitivity to commuting time seems to be a result of their larger responsibility for day-to-day household tasks, including childcare and housework. Copyright © 2011 Elsevier B.V. All rights reserved.

Pulse electrochemical meso/micro/nano ultraprecision machining technology.

PubMed

Lee, Jeong Min; Kim, Young Bin; Park, Jeong Woo

2013-11-01

This study demonstrated meso/micro/nano-ultraprecision machining through electrochemical reactions using intermittent DC pulses. The experiment focused on two machining methods: (1) pulse electrochemical polishing (PECP) of stainless steel, and (2) pulse electrochemical nano-patterning (PECNP) on a silicon (Si) surface, using atomic force microscopy (AFM) for fabrication. The dissolution reaction at the stainless steel surface following PECP produced a very clean, smooth workpiece. The advantages of the PECP process included improvements in corrosion resistance, deburring of the sample surface, and removal of hydrogen from the stainless steel surface as verified by time-of-flight secondary-ion mass spectrometry (TOF-SIMS). In PECNP, the electrochemical reaction generated within water molecules produced nanoscale oxide textures on a Si surface. Scanning probe microscopy (SPM) was used to evaluate nanoscale-pattern processing on a Si wafer surface produced by AFM-PECNP For both processes using pulse electrochemical reactions, three-dimensional (3-D) measurements and AFM were used to investigate the changes on the machined surfaces. Preliminary results indicated the potential for advancing surface polishing techniques and localized micro/nano-texturing technology using PECP and PECNP processes.

The Association between Access to Public Transportation and Self-Reported Active Commuting

PubMed Central

Djurhuus, Sune; Hansen, Henning S.; Aadahl, Mette; Glümer, Charlotte

2014-01-01

Active commuting provides routine-based regular physical activity which can reduce the risk of chronic diseases. Using public transportation involves some walking or cycling to a transit stop, transfers and a walk to the end location and users of public transportation have been found to accumulate more moderate physical activity than non-users. Understanding how public transportation characteristics are associated with active transportation is thus important from a public health perspective. This study examines the associations between objective measures of access to public transportation and self-reported active commuting. Self-reported time spent either walking or cycling commuting each day and the distance to workplace were obtained for adults aged 16 to 65 in the Danish National Health Survey 2010 (n = 28,928). Access to public transportation measures were computed by combining GIS-based road network distances from home address to public transit stops an integrating their service level. Multilevel logistic regression was used to examine the association between access to public transportation measures and active commuting. Distance to bus stop, density of bus stops, and number of transport modes were all positively associated with being an active commuter and with meeting recommendations of physical activity. No significant association was found between bus services at the nearest stop and active commuting. The results highlight the importance of including detailed measurements of access to public transit in order to identify the characteristics that facilitate the use of public transportation and active commuting. PMID:25489998

The association between access to public transportation and self-reported active commuting.

PubMed

Djurhuus, Sune; Hansen, Henning S; Aadahl, Mette; Glümer, Charlotte

2014-12-05

Active commuting provides routine-based regular physical activity which can reduce the risk of chronic diseases. Using public transportation involves some walking or cycling to a transit stop, transfers and a walk to the end location and users of public transportation have been found to accumulate more moderate physical activity than non-users. Understanding how public transportation characteristics are associated with active transportation is thus important from a public health perspective. This study examines the associations between objective measures of access to public transportation and self-reported active commuting. Self-reported time spent either walking or cycling commuting each day and the distance to workplace were obtained for adults aged 16 to 65 in the Danish National Health Survey 2010 (n = 28,928). Access to public transportation measures were computed by combining GIS-based road network distances from home address to public transit stops an integrating their service level. Multilevel logistic regression was used to examine the association between access to public transportation measures and active commuting. Distance to bus stop, density of bus stops, and number of transport modes were all positively associated with being an active commuter and with meeting recommendations of physical activity. No significant association was found between bus services at the nearest stop and active commuting. The results highlight the importance of including detailed measurements of access to public transit in order to identify the characteristics that facilitate the use of public transportation and active commuting.

Electric-magnetic dualities in non-abelian and non-commutative gauge theories

NASA Astrophysics Data System (ADS)

Ho, Jun-Kai; Ma, Chen-Te

2016-08-01

Electric-magnetic dualities are equivalence between strong and weak coupling constants. A standard example is the exchange of electric and magnetic fields in an abelian gauge theory. We show three methods to perform electric-magnetic dualities in the case of the non-commutative U (1) gauge theory. The first method is to use covariant field strengths to be the electric and magnetic fields. We find an invariant form of an equation of motion after performing the electric-magnetic duality. The second method is to use the Seiberg-Witten map to rewrite the non-commutative U (1) gauge theory in terms of abelian field strength. The third method is to use the large Neveu Schwarz-Neveu Schwarz (NS-NS) background limit (non-commutativity parameter only has one degree of freedom) to consider the non-commutative U (1) gauge theory or D3-brane. In this limit, we introduce or dualize a new one-form gauge potential to get a D3-brane in a large Ramond-Ramond (R-R) background via field redefinition. We also use perturbation to study the equivalence between two D3-brane theories. Comparison of these methods in the non-commutative U (1) gauge theory gives different physical implications. The comparison reflects the differences between the non-abelian and non-commutative gauge theories in the electric-magnetic dualities. For a complete study, we also extend our studies to the simplest abelian and non-abelian p-form gauge theories, and a non-commutative theory with the non-abelian structure.

77 FR 45715 - Application of Key Lime Air Corporation for Commuter Authority

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-01

... DEPARTMENT OF TRANSPORTATION Office of the Secretary [Docket DOT-OST-2009-0116] Application of Key Lime Air Corporation for Commuter Authority AGENCY: Department of Transportation. ACTION: Notice of... Lime Air Corporation fit, willing, and able, and awarding it a Commuter Air Carrier Authorization...

Statewide commuter assistance program evaluation report database survey : final report : results of survey and conclusions

DOT National Transportation Integrated Search

2001-12-01

The purpose of this research project was to provide a systematic evaluation of the performance of Florida's commuter assistance programs from two perspectives: Impact on the commuting patterns and awareness of the general public; and Impact on the co...

An evaluation toolkit for Florida's Commuter Assistance Programs (CAP) : a companion to the 1999 CAP evaluation manual

DOT National Transportation Integrated Search

2001-01-01

This manual is a companion piece to the Commuter Assistance Program Evaluation Manual that was developed to assist Florida's Commuter Assistance Programs (CAP) in their efforts to measure and evaluate their performance. This manual is intended to pro...

Commuter behavior and greenhouse gas emissions at the University of Rhode Island.

DOT National Transportation Integrated Search

2006-05-01

The purpose of this research was to study commuter habits and to measure commuter greenhouse emissions at the University of Rhode Island (URI) Kingston campus. In April 2006, an online survey was e-mailed to students, faculty, and staff to collect da...

14 CFR 298.11 - Exemption authority.

Code of Federal Regulations, 2011 CFR

2011-01-01

... REGULATIONS EXEMPTIONS FOR AIR TAXI AND COMMUTER AIR CARRIER OPERATIONS Exemptions § 298.11 Exemption authority. Air taxi operators and commuter air carriers are hereby relieved from the following provisions of... imposed herein, and to the extent necessary to permit them to conduct air taxi or commuter air carrier...

14 CFR 298.11 - Exemption authority.

Code of Federal Regulations, 2010 CFR

2010-01-01

... REGULATIONS EXEMPTIONS FOR AIR TAXI AND COMMUTER AIR CARRIER OPERATIONS Exemptions § 298.11 Exemption authority. Air taxi operators and commuter air carriers are hereby relieved from the following provisions of... imposed herein, and to the extent necessary to permit them to conduct air taxi or commuter air carrier...

Making connections : intermodal links available at 70 percent of all stations served by commuter rail, 2010

DOT National Transportation Integrated Search

2011-01-01

Intermodal connections with other scheduled public trans- : portation modes are available at 70 percent of all stations : served by commuter rail trains. Commuter rail passengers : are able to connect to other transportation modes at 8121 of : the 1,...

Effect of immediate or delayed light activation on curing kinetics and shrinkage stress of dual-cure resin cements.

PubMed

Faria-e-Silva, Andre; Boaro, Leticia; Braga, Roberto; Piva, Evandro; Arias, Vanessa; Martins, Luis

2011-01-01

This study evaluated the effect of light activation (absence, immediate, or delayed) on conversion kinetics and polymerization stress of three commercial dual-cured resin cements (Enforce, RelyX ARC, and Panavia F). Degree of conversion (DC) was monitored for 30 minutes using real-time near–Fourier transform infrared spectroscopy. The cement was mixed, placed on the spectrometer sample holder, and light activated either immediately or after five minutes (delayed light activation). When no light activation was performed, the materials were protected from light exposure (control). DC was evaluated at five and 30 minutes postmixture. Maximum rates of polymerization (Rp(max)) were obtained from the first derivative of the DC vs time curve. Polymerization stress was monitored for 30 minutes in 1-mm-thick specimens inserted between two cylinders attached to a universal testing machine. Data were submitted to analysis of variance/Tukey tests (α=0.05). Immediate light activation promoted the highest DC at five minutes. At 30 minutes, only RelyX ARC did not present a significant difference in DC between activation modes. Enforce and Panavia F presented higher Rp(max) for immediate and delayed light-activation, respectively. RelyX ARC showed similar Rp(max) for all activation modes. The absence of light activation resulted in the lowest stress followed by delayed light activation, while immediate light activation led to the highest values. RelyX ARC showed higher stress than Enforce, while the stress of Panavia F was similar to that of the others. Delayed light activation reduced the polymerization stress of the resin cements tested without jeopardizing DC.

14 CFR 36.9 - Acoustical change: Propeller-driven small airplanes and propeller-driven commuter category...

Code of Federal Regulations, 2013 CFR

2013-01-01

... airplanes and propeller-driven commuter category airplanes. 36.9 Section 36.9 Aeronautics and Space FEDERAL... AIRWORTHINESS CERTIFICATION General § 36.9 Acoustical change: Propeller-driven small airplanes and propeller-driven commuter category airplanes. For propeller-driven small airplanes in the primary, normal, utility...

14 CFR 36.9 - Acoustical change: Propeller-driven small airplanes and propeller-driven commuter category...

Code of Federal Regulations, 2012 CFR

2012-01-01

... airplanes and propeller-driven commuter category airplanes. 36.9 Section 36.9 Aeronautics and Space FEDERAL... AIRWORTHINESS CERTIFICATION General § 36.9 Acoustical change: Propeller-driven small airplanes and propeller-driven commuter category airplanes. For propeller-driven small airplanes in the primary, normal, utility...

14 CFR 36.9 - Acoustical change: Propeller-driven small airplanes and propeller-driven commuter category...

Code of Federal Regulations, 2011 CFR

2011-01-01

... airplanes and propeller-driven commuter category airplanes. 36.9 Section 36.9 Aeronautics and Space FEDERAL... AIRWORTHINESS CERTIFICATION General § 36.9 Acoustical change: Propeller-driven small airplanes and propeller-driven commuter category airplanes. For propeller-driven small airplanes in the primary, normal, utility...

14 CFR 36.9 - Acoustical change: Propeller-driven small airplanes and propeller-driven commuter category...

Code of Federal Regulations, 2014 CFR

2014-01-01

... airplanes and propeller-driven commuter category airplanes. 36.9 Section 36.9 Aeronautics and Space FEDERAL... AIRWORTHINESS CERTIFICATION General § 36.9 Acoustical change: Propeller-driven small airplanes and propeller-driven commuter category airplanes. For propeller-driven small airplanes in the primary, normal, utility...

49 CFR 37.51 - Key stations in commuter rail systems.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 1 2010-10-01 2010-10-01 false Key stations in commuter rail systems. 37.51 Section 37.51 Transportation Office of the Secretary of Transportation TRANSPORTATION SERVICES FOR INDIVIDUALS WITH DISABILITIES (ADA) Transportation Facilities § 37.51 Key stations in commuter rail systems...

77 FR 4326 - Announcement of Requirements and Registration for “Health Innovations in Commuting Challenge”

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-27

... Innovations in Commuting Challenge'' AGENCY: Office of the National Coordinator for Health Information... ``Health Innovations in Commuting Challenge'' invites innovators to submit their best ideas and models for... regards to differences in gender, social status, ethnicity, and geographic location, relatively little is...

14 CFR 36.9 - Acoustical change: Propeller-driven small airplanes and propeller-driven commuter category...

Code of Federal Regulations, 2010 CFR

2010-01-01

... airplanes and propeller-driven commuter category airplanes. 36.9 Section 36.9 Aeronautics and Space FEDERAL... AIRWORTHINESS CERTIFICATION General § 36.9 Acoustical change: Propeller-driven small airplanes and propeller-driven commuter category airplanes. For propeller-driven small airplanes in the primary, normal, utility...

20 CFR 655.103 - Overview of this subpart and definition of terms.

Code of Federal Regulations, 2014 CFR

2014-04-01

... effect wage rate (AEWR). The annual weighted average hourly wage for field and livestock workers.... 1188. Area of intended employment. The geographic area within normal commuting distance of the place of... constitutes a normal commuting distance or normal commuting area, because there may be widely varying factual...

20 CFR 655.103 - Overview of this subpart and definition of terms.

Code of Federal Regulations, 2013 CFR

2013-04-01

... effect wage rate (AEWR). The annual weighted average hourly wage for field and livestock workers.... 1188. Area of intended employment. The geographic area within normal commuting distance of the place of... constitutes a normal commuting distance or normal commuting area, because there may be widely varying factual...

20 CFR 655.4 - Definitions of terms used in this subpart.

Code of Federal Regulations, 2012 CFR

2012-04-01

.... worker recruitment report. Area of Intended Employment means the geographic area within normal commuting... certification is sought. There is no rigid measure of distance which constitutes a normal commuting distance or normal commuting area, because there may be widely varying factual circumstances among different areas (e...

20 CFR 655.103 - Overview of this subpart and definition of terms.

Code of Federal Regulations, 2012 CFR

2012-04-01

... effect wage rate (AEWR). The annual weighted average hourly wage for field and livestock workers.... 1188. Area of intended employment. The geographic area within normal commuting distance of the place of... constitutes a normal commuting distance or normal commuting area, because there may be widely varying factual...

29 CFR 501.3 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... pursuant to 5 U.S.C. 3105. Adverse effect wage rate (AEWR). The annual weighted average hourly wage for... worker subject to 8 U.S.C. 1188. Area of intended employment. The geographic area within normal commuting... measure of distance that constitutes a normal commuting distance or normal commuting area, because there...

29 CFR 501.3 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... pursuant to 5 U.S.C. 3105. Adverse effect wage rate (AEWR). The annual weighted average hourly wage for... worker subject to 8 U.S.C. 1188. Area of intended employment. The geographic area within normal commuting... measure of distance that constitutes a normal commuting distance or normal commuting area, because there...

29 CFR 501.3 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... pursuant to 5 U.S.C. 3105. Adverse effect wage rate (AEWR). The annual weighted average hourly wage for... worker subject to 8 U.S.C. 1188. Area of intended employment. The geographic area within normal commuting... measure of distance that constitutes a normal commuting distance or normal commuting area, because there...

29 CFR 501.3 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... pursuant to 5 U.S.C. 3105. Adverse effect wage rate (AEWR). The annual weighted average hourly wage for... worker subject to 8 U.S.C. 1188. Area of intended employment. The geographic area within normal commuting... measure of distance that constitutes a normal commuting distance or normal commuting area, because there...

Active Commuting Patterns at a Large, Midwestern College Campus

ERIC Educational Resources Information Center

Bopp, Melissa; Kaczynski, Andrew; Wittman, Pamela

2011-01-01

Objective: To understand patterns and influences on active commuting (AC) behavior. Participants: Students and faculty/staff at a university campus. Methods: In April-May 2008, respondents answered an online survey about mode of travel to campus and influences on commuting decisions. Hierarchical regression analyses predicted variance in walking…

75 FR 48361 - Notice of Lodging of Consent Decree Under the Clean Air Act

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-10

.... Massachusetts Bay Transportation Authority (``MBTA'') and Massachusetts Bay Commuter Railroad Company, L.L.C... Massachusetts Bay Transportation Authority (``MBTA'') and the Massachusetts Bay Commuter Railroad Company, L.L.C... and MBCR will: (1) Install sufficient electric plug-in stations throughout the MBTA's commuter rail...

The Relationship Between Self Concept and Marital Adjustment.

ERIC Educational Resources Information Center

Hall, William M., Jr.; Valine, Warren J.

The purpose of this study was to investigate the relationship between self concept and marital adjustment for married students and their spouses in a commuter college setting. The sample consisted of a random selection of 50 "both spouses commuting" couples, 50 "husband only commuting" couples, and 50 "wife only…

14 CFR 298.30 - Public disclosure of policy on consumer protection.

Code of Federal Regulations, 2011 CFR

2011-01-01

... (AVIATION PROCEEDINGS) ECONOMIC REGULATIONS EXEMPTIONS FOR AIR TAXI AND COMMUTER AIR CARRIER OPERATIONS... protection. (a) Every air taxi and commuter air carrier shall cause to be displayed continuously in a..., containing a statement setting forth the air taxi and commuter air carrier's policy on baggage liability and...

14 CFR 298.38 - Financial security arrangements for operating Public Charters.

Code of Federal Regulations, 2010 CFR

2010-01-01

... OF TRANSPORTATION (AVIATION PROCEEDINGS) ECONOMIC REGULATIONS EXEMPTIONS FOR AIR TAXI AND COMMUTER... security arrangements for operating Public Charters. When an air taxi operator or commuter air carrier performs a Public Charter under part 380 of this chapter, either: (a) The air taxi operator or commuter air...

14 CFR 298.38 - Financial security arrangements for operating Public Charters.

Code of Federal Regulations, 2011 CFR

2011-01-01

... OF TRANSPORTATION (AVIATION PROCEEDINGS) ECONOMIC REGULATIONS EXEMPTIONS FOR AIR TAXI AND COMMUTER... security arrangements for operating Public Charters. When an air taxi operator or commuter air carrier performs a Public Charter under part 380 of this chapter, either: (a) The air taxi operator or commuter air...

Gauge transformation and symmetries of the commutative multicomponent BKP hierarchy

NASA Astrophysics Data System (ADS)

Li, Chuanzhong

2016-01-01

In this paper, we defined a new multi-component B type Kadomtsev-Petviashvili (BKP) hierarchy that takes values in a commutative subalgebra of {gl}(N,{{C}}). After this, we give the gauge transformation of this commutative multicomponent BKP (CMBKP) hierarchy. Meanwhile, we construct a new constrained CMBKP hierarchy that contains some new integrable systems, including coupled KdV equations under a certain reduction. After this, the quantum torus symmetry and quantum torus constraint on the tau function of the commutative multi-component BKP hierarchy will be constructed.

Potential to increase active commuting level in university area (Case study: Universitas Gadjah Mada)

NASA Astrophysics Data System (ADS)

Devi, M. K.

2017-06-01

In order to alleviate the negative impacts of motorized vehicle use as well as create sustainable environment within campus area, it is pivotal to encourage mode shifting among university students. Active transport modes such as walking, cycling, and using public transport can be considered as alternative modes. This paper tried to identify the potential to increase active commuting in UGM by understanding student’s travel behavior. ANOVA test was employed to identify the perceptions between students across residential zones toward motivators and barriers to actively commute. The findings were used to propose strategies for increasing active commuting level in UGM, which are: reducing barriers to actively commute, improving public transport services, improving walking and cycling facilities, and introducing programs to discourage motorized vehicle use.

The standard model on non-commutative space-time

NASA Astrophysics Data System (ADS)

Calmet, X.; Jurčo, B.; Schupp, P.; Wess, J.; Wohlgenannt, M.

2002-03-01

We consider the standard model on a non-commutative space and expand the action in the non-commutativity parameter θ^{μ ν}. No new particles are introduced; the structure group is SU(3)× SU(2)× U(1). We derive the leading order action. At zeroth order the action coincides with the ordinary standard model. At leading order in θ^{μν} we find new vertices which are absent in the standard model on commutative space-time. The most striking features are couplings between quarks, gluons and electroweak bosons and many new vertices in the charged and neutral currents. We find that parity is violated in non-commutative QCD. The Higgs mechanism can be applied. QED is not deformed in the minimal version of the NCSM to the order considered.

An Examination of the U.S. Regional Airline Policies Regarding Child Restraint Systems

NASA Technical Reports Server (NTRS)

Carstenson, Larry; Sluti, Donald; Luedtke, Jacqueline

2000-01-01

A prior study examined the policies of U.S. air carriers with regard to the use of infant restraint systems on board commercial aircraft. This study expands on that earlier study by examining the policies of commuter air carriers in the United States regarding the use of infant restraint systems. The management policy of the commuter air carriers has been investigated and officials of the commuter air carriers were surveyed to determine how the carriage of infants onboard their aircraft varied among commuter airlines. The topics investigated included seat space for infants, restraint systems for infants, and amenities for infant passengers. The results of this study have been analyzed to ascertain if any recommendations can be made to the commuter airlines regarding the carriage of infants onboard their aircraft.

Municipal investment in off-road trails and changes in bicycle commuting in Minneapolis, Minnesota over 10 years: a longitudinal repeated cross-sectional study.

PubMed

Hirsch, Jana A; Meyer, Katie A; Peterson, Marc; Zhang, Le; Rodriguez, Daniel A; Gordon-Larsen, Penny

2017-02-13

We studied the effect of key development and expansion of an off-road multipurpose trail system in Minneapolis, Minnesota between 2000 and 2007 to understand whether infrastructure investments are associated with increases in commuting by bicycle. We used repeated measures regression on tract-level (N = 116 tracts) data to examine changes in bicycle commuting between 2000 and 2008-2012. We investigated: 1) trail proximity measured as distance from the trail system and 2) trail potential use measured as the proportion of commuting trips to destinations that might traverse the trail system. All analyses (performed 2015-2016) adjusted for tract-level sociodemographic covariates and contemporaneous cycling infrastructure changes (e.g., bicycle lanes). Tracts that were both closer to the new trail system and had a higher proportion of trips to destinations across the trail system experienced greater 10-year increases in commuting by bicycle. Proximity to off-road infrastructure and travel patterns are relevant to increased bicycle commuting, an important contributor to overall physical activity. Municipal investment in bicycle facilities, especially off-road trails that connect a city's population and its employment centers, is likely to lead to increases in commuting by bicycle.

Non-commutative methods in quantum mechanics

NASA Astrophysics Data System (ADS)

Millard, Andrew Clive

1997-09-01

Non-commutativity appears in physics almost hand in hand with quantum mechanics. Non-commuting operators corresponding to observables lead to Heisenberg's Uncertainty Principle, which is often used as a prime example of how quantum mechanics transcends 'common sense', while the operators that generate a symmetry group are usually given in terms of their commutation relations. This thesis discusses a number of new developments which go beyond the usual stopping point of non-commuting quantities as matrices with complex elements. Chapter 2 shows how certain generalisations of quantum mechanics, from using complex numbers to using other (often non-commutative) algebras, can still be written as linear systems with symplectic phase flows. Chapter 3 deals with Adler's trace dynamics, a non-linear graded generalisation of Hamiltonian dynamics with supersymmetry applications, where the phase space coordinates are (generally non-commuting) operators, and reports on aspects of a demonstration that the statistical averages of the dynamical variables obey the rules of complex quantum field theory. The last two chapters discuss specific aspects of quaternionic quantum mechanics. Chapter 4 reports a generalised projective representation theory and presents a structure theorem that categorises quaternionic projective representations. Chapter 5 deals with a generalisation of the coherent states formalism and examines how it may be applied to two commonly used groups.

Associations between active commuting and physical and mental wellbeing.

PubMed

Humphreys, David K; Goodman, Anna; Ogilvie, David

2013-08-01

To examine whether a relationship exists between active commuting and physical and mental wellbeing. In 2009, cross-sectional postal questionnaire data were collected from a sample of working adults (aged 16 and over) in the Commuting and Health in Cambridge study. Travel behaviour and physical activity were ascertained using the Recent Physical Activity Questionnaire (RPAQ) and a seven-day travel-to-work recall instrument from which weekly time spent in active commuting (walking and cycling) was derived. Physical and mental wellbeing were assessed using the Medical Outcomes Study Short Form survey (SF-8). Associations were tested using multivariable linear regression. An association was observed between physical wellbeing (PCS-8) score and time spent in active commuting after adjustment for other physical activity (adjusted regression coefficients 0.48, 0.79 and 1.21 for 30-149 min/week, 150-224 min/week and ≥ 225 min/week respectively versus < 30 min/week, p=0.01 for trend; n=989). No such relationship was found for mental wellbeing (MCS-8) (p=0.52). Greater time spent actively commuting is associated with higher levels of physical wellbeing. Longitudinal studies should examine the contribution of changing levels of active commuting and other forms of physical activity to overall health and wellbeing. Copyright © 2013 Elsevier Inc. All rights reserved.

Associations between Active Commuting to School and Health-Related Physical Fitness in Spanish School-Aged Children: A Cross-Sectional Study

PubMed Central

Villa-González, Emilio; Ruiz, Jonatan R.; Chillón, Palma

2015-01-01

Active commuting (walking or cycling) to school has been positively associated with improved fitness among adolescents. However, current evidence lacks information on whether this association persists in children. The aim of this study was to examine the association of active commuting to school with different fitness parameters in Spanish school-aged children. A total of 494 children (229 girls) from five primary schools in Granada and Jaén (Spain), aged between eight and 11 years, participated in this cross-sectional study. Participants completed the Assessing Levels of Physical Activity (ALPHA) fitness test battery and answered a self-reported questionnaire regarding the weekly travel mode to school. Active commuting to school was significantly associated with higher levels of speed-agility in boys (p = 0.048) and muscle strength of the lower body muscular fitness in girls (p = 0.016). However, there were no significant associations between active commuting to school and cardiorespiratory fitness and upper body muscular fitness. Our findings suggest that active commuting to school was associated with higher levels of both speed-agility and lower body muscular fitness in boys and girls, respectively. Future studies should confirm whether increasing active commuting to school increases speed-agility and muscle strength of the lower body. PMID:26322487

Epidemic dynamics of a vector-borne disease on a villages-and-city star network with commuters.

PubMed

Mpolya, Emmanuel A; Yashima, Kenta; Ohtsuki, Hisashi; Sasaki, Akira

2014-02-21

We develop a star-network of connections between a central city and peripheral villages and analyze the epidemic dynamics of a vector-borne disease as influenced by daily commuters. We obtain an analytical solution for the global basic reproductive number R0 and investigate its dependence on key parameters for disease control. We find that in a star-network topology the central hub is not always the best place to focus disease intervention strategies. Disease control decisions are sensitive to the number of commuters from villages to the city as well as the relative densities of mosquitoes between villages and city. With more commuters it becomes important to focus on the surrounding villages. Commuting to the city paradoxically reduces the disease burden even when the bulk of infections are in the city because of the resulting diluting effects of transmissions with more commuters. This effect decreases with heterogeneity in host and vector population sizes in the villages due to the formation of peripheral epicenters of infection. We suggest that to ensure effective control of vector-borne diseases in star networks of villages and cities it is also important to focus on the commuters and where they come from. © 2013 Published by Elsevier Ltd.

Utilizing Crowdsourced Data for Studies of Cycling and Air Pollution Exposure: A Case Study Using Strava Data.

PubMed

Sun, Yeran; Mobasheri, Amin

2017-03-08

With the development of information and communications technology, user-generated content and crowdsourced data are playing a large role in studies of transport and public health. Recently, Strava, a popular website and mobile app dedicated to tracking athletic activity (cycling and running), began offering a data service called Strava Metro, designed to help transportation researchers and urban planners to improve infrastructure for cyclists and pedestrians. Strava Metro data has the potential to promote studies of cycling and health by indicating where commuting and non-commuting cycling activities are at a large spatial scale (street level and intersection level). The assessment of spatially varying effects of air pollution during active travel (cycling or walking) might benefit from Strava Metro data, as a variation in air pollution levels within a city would be expected. In this paper, to explore the potential of Strava Metro data in research of active travel and health, we investigate spatial patterns of non-commuting cycling activities and associations between cycling purpose (commuting and non-commuting) and air pollution exposure at a large scale. Additionally, we attempt to estimate the number of non-commuting cycling trips according to environmental characteristics that may help identify cycling behavior. Researchers who are undertaking studies relating to cycling purpose could benefit from this approach in their use of cycling trip data sets that lack trip purpose. We use the Strava Metro Nodes data from Glasgow, United Kingdom in an empirical study. Empirical results reveal some findings that (1) when compared with commuting cycling activities, non-commuting cycling activities are more likely to be located in outskirts of the city; (2) spatially speaking, cyclists riding for recreation and other purposes are more likely to be exposed to relatively low levels of air pollution than cyclists riding for commuting; and (3) the method for estimating of the number of non-commuting cycling activities works well in this study. The results highlight: (1) a need for policymakers to consider how to improve cycling infrastructure and road safety in outskirts of cities; and (2) a possible way of estimating the number of non-commuting cycling activities when the trip purpose of cycling data is unknown.

Utilizing Crowdsourced Data for Studies of Cycling and Air Pollution Exposure: A Case Study Using Strava Data

PubMed Central

Sun, Yeran; Mobasheri, Amin

2017-01-01

With the development of information and communications technology, user-generated content and crowdsourced data are playing a large role in studies of transport and public health. Recently, Strava, a popular website and mobile app dedicated to tracking athletic activity (cycling and running), began offering a data service called Strava Metro, designed to help transportation researchers and urban planners to improve infrastructure for cyclists and pedestrians. Strava Metro data has the potential to promote studies of cycling and health by indicating where commuting and non-commuting cycling activities are at a large spatial scale (street level and intersection level). The assessment of spatially varying effects of air pollution during active travel (cycling or walking) might benefit from Strava Metro data, as a variation in air pollution levels within a city would be expected. In this paper, to explore the potential of Strava Metro data in research of active travel and health, we investigate spatial patterns of non-commuting cycling activities and associations between cycling purpose (commuting and non-commuting) and air pollution exposure at a large scale. Additionally, we attempt to estimate the number of non-commuting cycling trips according to environmental characteristics that may help identify cycling behavior. Researchers who are undertaking studies relating to cycling purpose could benefit from this approach in their use of cycling trip data sets that lack trip purpose. We use the Strava Metro Nodes data from Glasgow, United Kingdom in an empirical study. Empirical results reveal some findings that (1) when compared with commuting cycling activities, non-commuting cycling activities are more likely to be located in outskirts of the city; (2) spatially speaking, cyclists riding for recreation and other purposes are more likely to be exposed to relatively low levels of air pollution than cyclists riding for commuting; and (3) the method for estimating of the number of non-commuting cycling activities works well in this study. The results highlight: (1) a need for policymakers to consider how to improve cycling infrastructure and road safety in outskirts of cities; and (2) a possible way of estimating the number of non-commuting cycling activities when the trip purpose of cycling data is unknown. PMID:28282865

Bikeability and methodological issues using the active commuting route environment scale (ACRES) in a metropolitan setting

PubMed Central

2011-01-01

Background Route environments can positively influence people's active commuting and thereby contribute to public health. The Active Commuting Route Environment Scale (ACRES) was developed to study active commuters' perceptions of their route environments. However, bicycle commuters represent a small portion of the population in many cities and thus are difficult to study using population-based material. Therefore, the aim of this study is to expand the state of knowledge concerning the criterion-related validity of the ACRES and the representativity using an advertisement-recruited sample. Furthermore, by comparing commuting route environment profiles of inner urban and suburban areas, we provide a novel basis for understanding the relationship between environment and bikeability. Methods Bicycle commuters from Greater Stockholm, Sweden, advertisement- (n = 1379) and street-recruited (n = 93), responded to the ACRES. Traffic planning and environmental experts from the Municipality of Stockholm (n = 24) responded to a modified version of the ACRES. The criterion-related validity assessments were based on whether or not differences between the inner urban and the suburban route environments, as indicated by the experts and by four existing objective measurements, were reflected by differences in perceptions of these environments. Comparisons of ratings between advertisement- and street-recruited participants were used for the assessments of representativity. Finally, ratings of inner urban and suburban route environments were used to evaluate commuting route environment profiles. Results Differences in ratings of the inner urban and suburban route environments by the advertisement-recruited participants were in accord with the existing objective measurements and corresponded reasonably well with those of the experts. Overall, there was a reasonably good correspondence between the advertisement- and street-recruited participants' ratings. Distinct differences in commuting route environment profiles were noted between the inner urban and suburban areas. Suburban route environments were rated as safer and more stimulating for bicycle-commuting than the inner urban ones. In general, the findings applied to both men and women. Conclusions The overall results show: considerable criterion-related validity of the ACRES; ratings of advertisement-recruited participants mirroring those of street-recruited participants; and a higher degree of bikeability in the suburban commuting route environments than in the inner urban ones. PMID:21241470

Levels of ambient air pollution according to mode of transport: a systematic review.

PubMed

Cepeda, Magda; Schoufour, Josje; Freak-Poli, Rosanne; Koolhaas, Chantal M; Dhana, Klodian; Bramer, Wichor M; Franco, Oscar H

2017-01-01

Controversy exists about the differences in air pollution exposure and inhalation dose between mode of transport. We aimed to review air pollution exposure and inhaled dose according to mode of transport and pollutant and their effect in terms of years of life expectancy (YLE). In this systematic review, we searched ten online databases from inception to April 13, 2016, without language or temporal restrictions, for cohort, cross-sectional, and experimental studies that compared exposure to carbon monoxide, black carbon, nitrogen dioxide, and fine and coarse particles in active commuters (pedestrian or cyclist) and commuters using motorised transport (car, motorcycle, bus, or massive motorised transport [MMT-ie, train, subway, or metro]). We excluded studies that measured air pollution exposure exclusively with biomarkers or on the basis of simulated data, reviews, comments, consensuses, editorials, guidelines, in-vitro studies, meta-analyses, ecological studies, and protocols. We extracted average exposure and commuting time per mode of transport and pollutant to calculate inhaled doses. We calculated exposure and inhaled dose ratios using active commuters as the reference and summarised them with medians and IQRs. We also calculated differences in YLE due to fine particle inhaled dose and physical activity. We identified 4037 studies, of which 39 were included in the systematic review. Overall, car commuters had higher exposure to all pollutants than did active commuters in 30 (71%) of 42 comparisons (median ratio 1·22 [IQR 0·90-1·76]), followed by those who commuted by bus in 57 (52%) of 109 (1·0 [0·79-1·41]), by motorcycle in 16 (50%) of 32 (0·99 [0·86-1·38]), by a car with controlled ventilation settings in 39 (45%) of 86 (0·95 [0·66-1·54]), and by MMT in 21 (38%) of 55 (0·67 [0·49-1·13]). Overall, active commuters had higher inhalation doses than did commuters using motorised transport (median ratio car with controlled ventilation settings 0·16 [0·10-0·28]; car 0·22 [0·15-0·30]; motorcycle 0·38 [0·26-0·78]; MMT 0·49 [0·34-0·81]; bus 0·72 [IQR 0·50-0·99]). Commuters using motorised transport lost up to 1 year in YLE more than did cyclists. Proximity to traffic and high air interchange increased the exposure to air pollution of commuters using motorised transport. Larger inhalation rates and commuting time increased inhaled dose among active commuters. Benefits of active commuting from physical activity are larger than the risk from an increased inhaled dose of fine particles. Departamento Administrativo de Ciencia, Tecnología e Innovación (COLCIENCIAS), National Health and Medical Research Council, Nestlé Nutrition (Nestec), Metagenics, and AXA. Copyright © 2017 The Author(s). Published by Elsevier Ltd. This is an Open Access article under the CC BY-NC-ND license. Published by Elsevier Ltd.. All rights reserved.

Observation of development of breast cancer cell lines in real time by fluorescence microscopy under simulated microgravity

NASA Astrophysics Data System (ADS)

Lavan, David; Valdivia-Silva, Julio E.; Sanabria, Gabriela; Orihuela, Diego; Suarez, Juan; Quispe, Marco; Chuchon, Mariano; Martin, David; Maroto, Marcos; Egea, Javier

2016-07-01

This project consist in the implementation of a fluorescence microscope for the in real time monitoring of biological labeled samples by several fluorophores in microgravity conditions keeping the temperature, humidity, and (CO)2 controlled by an electronic platform. The system (fluorescence microscope and incubator) is integrated to a microgravity simulator machine which was presented on the "30th Annual American Society for Gravitation and Space Research Meeting" October 2014 in Pasadena, CA, USA. Currently, we have the microgravity machine biologically validated by genetic expression studies in pupal stage of Drosophila melanogaster. The fluorescence microscope has a platform designed to hold a culture flask, and a fluorescence camera (Leica DFC3000 G) connected to an optical system (Fluorescence Light source Leica EL6000, optic fiber, fiber adapter, and fluorescence filter) in order to take images in real time. The mechanical system of the fluorescence microsc ope is designed to allow the displacement of the fluorescence camera through a parallel plane to the culture flask's plane and also the movement of the platform through a perpendicular axis to the culture flask in order to focus the samples to the optical system. The mechanical system is propelled by four DC moto-reductors with encoder (A-max 26 Maxon motor, GP 32S screw and MR encoder) that generate displacements in the order of micrometers. The angular position control of the DC motoreductor's shaft of all the DC moto-reductors is done by PWM signals based on the interpretation of the signals provided by the encoders during the movement. The system is remotely operated by a graphic interface installed on a personal computer or any mobile device (smartphone, laptop or tablet) by using the internet. Acknowledgments: Grant of INNOVATE PERU (Formerly FINCYT)

Multicenter Evaluation of a Commercial Cytomegalovirus Quantitative Standard: Effects of Commutability on Interlaboratory Concordance

PubMed Central

Shahbazian, M. D.; Valsamakis, A.; Boonyaratanakornkit, J.; Cook, L.; Pang, X. L.; Preiksaitis, J. K.; Schönbrunner, E. R.; Caliendo, A. M.

2013-01-01

Commutability of quantitative reference materials has proven important for reliable and accurate results in clinical chemistry. As international reference standards and commercially produced calibration material have become available to address the variability of viral load assays, the degree to which such materials are commutable and the effect of commutability on assay concordance have been questioned. To investigate this, 60 archived clinical plasma samples, which previously tested positive for cytomegalovirus (CMV), were retested by five different laboratories, each using a different quantitative CMV PCR assay. Results from each laboratory were calibrated both with lab-specific quantitative CMV standards (“lab standards”) and with common, commercially available standards (“CMV panel”). Pairwise analyses among laboratories were performed using mean results from each clinical sample, calibrated first with lab standards and then with the CMV panel. Commutability of the CMV panel was determined based on difference plots for each laboratory pair showing plotted values of standards that were within the 95% prediction intervals for the clinical specimens. Commutability was demonstrated for 6 of 10 laboratory pairs using the CMV panel. In half of these pairs, use of the CMV panel improved quantitative agreement compared to use of lab standards. Two of four laboratory pairs for which the CMV panel was noncommutable showed reduced quantitative agreement when that panel was used as a common calibrator. Commutability of calibration material varies across different quantitative PCR methods. Use of a common, commutable quantitative standard can improve agreement across different assays; use of a noncommutable calibrator can reduce agreement among laboratories. PMID:24025907

On the road again: patient perspectives on commuting for palliative care.

PubMed

Pesut, Barbara; Robinson, Carole A; Bottorff, Joan L; Fyles, Gillian; Broughton, Sandra

2010-06-01

The aim of this research project was to gain an understanding of the experiences of rural cancer patients who commute to an urban cancer center for palliative care. The study utilized a mixed method design. Fifteen individuals with a palliative designation participated in semi-structured interviews and filled out the Problems and Needs in Palliative Care Questionnaire. Qualitative findings included three major themes: cultures of rural life and care, strategies for commuting, and the effects of commuting. Participants valued their rural lifestyles and gained significant support from their communities. Strategies included preparing for the trip with particular attention to pain management, making the most of time, and maintaining significant relationships. Establishing a routine helped to offset the anxiety of commuting. Commuting was costly but the quality of life and supportive relationships obtained through treatment were significant benefits. Questionnaire data suggested that participants were experiencing a number of problems but few indicated they desired more professional attention to those problems. Rural lifestyles are often an important part of overall well-being and commuting for care is both costly and complex. Health care providers should assist individuals to weigh the relative contributions of staying in their rural locale versus commuting for care to their overall quality of life. Palliative-care individuals in this study indicated a number of ongoing problems but were not inclined to seek further assistance from health care providers in addressing those problems. Clinicians should actively inquire about problems and further research is needed to understand why patients are reluctant to seek help.

Modification of Traffic-related Respiratory Response by Asthma Control in a Population of Car Commuters.

PubMed

Mirabelli, Maria C; Golan, Rachel; Greenwald, Roby; Raysoni, Amit U; Holguin, Fernando; Kewada, Priya; Winquist, Andrea; Flanders, W Dana; Sarnat, Jeremy A

2015-07-01

Effects of traffic-related exposures on respiratory health are well documented, but little information is available about whether asthma control influences individual susceptibility. We analyzed data from the Atlanta Commuter Exposure study to evaluate modification of associations between rush-hour commuting, in- vehicle air pollution, and selected respiratory health outcomes by asthma control status. Between 2009 and 2011, 39 adults participated in Atlanta Commuter Exposure, and each conducted two scripted rush-hour highway commutes. In-vehicle particulate components were measured during all commutes. Among adults with asthma, we evaluated asthma control by questionnaire and spirometry. Exhaled nitric oxide, forced expiratory volume in 1 second (FEV1), and other metrics of respiratory health were measured precommute and 0, 1, 2, and 3 hours postcommute. We used mixed effects linear regression to evaluate associations between commute-related exposures and postcommute changes in metrics of respiratory health by level of asthma control. We observed increased exhaled nitric oxide across all levels of asthma control compared with precommute measurements, with largest postcommute increases observed among participants with below-median asthma control (2 hours postcommute: 14.6% [95% confidence interval {CI} = 5.7, 24.2]; 3 hours postcommute: 19.5% [95% CI = 7.8, 32.5]). No associations between in-vehicle pollutants and percent of predicted FEV1 were observed, although higher PM2.5 was associated with lower FEV1 % predicted among participants with below-median asthma control (3 hours postcommute: -7.2 [95% CI = -11.8, -2.7]). Level of asthma control may influence respiratory response to in-vehicle exposures experienced during rush-hour commuting.

Transactions of The Army Conference on Applied Mathematics and Computing (5th) Held in West Point, New York on 15-18 June 1987

DTIC Science & Technology

1988-03-01

29 Statistical Machine Learning for the Cognitive Selection of Nonlinear Programming Algorithms in Engineering Design Optimization Toward...interpolation and Interpolation by Box Spline Surfaces Charles K. Chui, Harvey Diamond, Louise A. Raphael. 301 Knot Selection for Least Squares...West Virginia University, Morgantown, West Virginia; and Louise Raphael, National Science Foundation, Washington, DC Knot Selection for Least

New Navy Fighting Machine in the South China Sea

DTIC Science & Technology

2012-06-01

documents/SD_WhitePaper_Mil6. pdf . Rubel, Robert C. "The Future of the Aircraft Carrier." Naval War College Review, Autumn 2011, http:// www.usnwc.edu...50 Figure 8. CT USV Disbursement Amongst Combatants Tactic...51 Figure 9. FALCON Laser Node Affixed to DC-3 Aircraft ...Area Denial AAC Air-to-Air Combat AAD Anti- Aircraft Defense AGC Automatic Gain Control AGS Advanced Gun System ARIES Airborne Reconnaissance

26 CFR 1.46-11 - Commuter highway vehicles.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 26 Internal Revenue 1 2012-04-01 2012-04-01 false Commuter highway vehicles. 1.46-11 Section 1.46... vehicles. (a) In general. Section 46(c)(6) provides that the applicable percentage to determine qualified investment under section 46(c)(1) for a qualifying commuter highway vehicle is 100 percent. A qualifying...

26 CFR 1.46-11 - Commuter highway vehicles.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 26 Internal Revenue 1 2013-04-01 2013-04-01 false Commuter highway vehicles. 1.46-11 Section 1.46... vehicles. (a) In general. Section 46(c)(6) provides that the applicable percentage to determine qualified investment under section 46(c)(1) for a qualifying commuter highway vehicle is 100 percent. A qualifying...

Impulse commutating circuit with transformer to limit reapplied voltage

NASA Technical Reports Server (NTRS)

Mcconville, J. H.

1973-01-01

Silicon controlled rectifier opens circuit with currents flowing up to values of 30 amperes. Switching concept halves both current and voltage in middle of commutating cycle thereby lowering size and weight requirements. Commutating circuit can be turned on or off by command and will remain on in absence of load due to continuous gate.

Redesigning Our Campuses to Meet the Needs of Our Commuting Students: Study Lounges.

ERIC Educational Resources Information Center

Andreas, Rosalind; Kubik, Jan

The interaction between changing student populations and the study-lounge facilities provided for their extracurricular higher educational experiences is considered. Trends indicate that increasing numbers of students are commuting to the college campus and that: the commuting student lifestyle can be characterized by multiplicity of roles;…

Commuters Get Their Own Place at Mansfield U.

ERIC Educational Resources Information Center

Lipka, Sara

2007-01-01

Nearly 60 percent of Mansfield University's 2,900 undergraduates live off campus, many commuting up to an hour each way. While the commuter population has remained steady in recent years, students' expectations for how the institution should serve them have increased, officials here say. When Maravene S. Loeschke became president of Mansfield last…

Happiness and Satisfaction with Work Commute

ERIC Educational Resources Information Center

Olsson, Lars E.; Garling, Tommy; Ettema, Dick; Friman, Margareta; Fujii, Satoshi

2013-01-01

Research suggests that for many people happiness is being able to make the routines of everyday life work, such that positive feelings dominate over negative feelings resulting from daily hassles. In line with this, a survey of work commuters in the three largest urban areas of Sweden show that satisfaction with the work commute contributes to…

Understanding What Influences Successful Black Commuter Students' Engagement in College

ERIC Educational Resources Information Center

Yearwood, Trina Lynn; Jones, Elizabeth A.

2012-01-01

Black and commuter students are disadvantaged when it comes to higher education. Although black students are enrolling in college more than they did in previous years, fewer are earning degrees compared with their counterparts. Research asserts that students who live on campus are more engaged compared with students who commute. This is troubling…

76 FR 72239 - Agency Information Collection Activities: Requests for Comments; Clearance of Renewed Approval of...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-22

... Air Taxi and Commuter Air Carrier Operations AGENCY: Federal Aviation Administration (FAA), DOT... certificate of public convenience and necessity from the DOT, with the exception of air taxi and commuter air...: OMB Control Number: 2120-0633. Title: Exemptions for Air Taxi and Commuter Air Carrier Operations...

Simplified High-Power Inverter

NASA Technical Reports Server (NTRS)

Edwards, D. B.; Rippel, W. E.

1984-01-01

Solid-state inverter simplified by use of single gate-turnoff device (GTO) to commutate multiple silicon controlled rectifiers (SCR's). By eliminating conventional commutation circuitry, GTO reduces cost, size and weight. GTO commutation applicable to inverters of greater than 1-kilowatt capacity. Applications include emergency power, load leveling, drives for traction and stationary polyphase motors, and photovoltaic-power conditioning.

Bias Assessment of General Chemistry Analytes using Commutable Samples.

PubMed

Koerbin, Gus; Tate, Jillian R; Ryan, Julie; Jones, Graham Rd; Sikaris, Ken A; Kanowski, David; Reed, Maxine; Gill, Janice; Koumantakis, George; Yen, Tina; St John, Andrew; Hickman, Peter E; Simpson, Aaron; Graham, Peter

2014-11-01

Harmonisation of reference intervals for routine general chemistry analytes has been a goal for many years. Analytical bias may prevent this harmonisation. To determine if analytical bias is present when comparing methods, the use of commutable samples, or samples that have the same properties as the clinical samples routinely analysed, should be used as reference samples to eliminate the possibility of matrix effect. The use of commutable samples has improved the identification of unacceptable analytical performance in the Netherlands and Spain. The International Federation of Clinical Chemistry and Laboratory Medicine (IFCC) has undertaken a pilot study using commutable samples in an attempt to determine not only country specific reference intervals but to make them comparable between countries. Australia and New Zealand, through the Australasian Association of Clinical Biochemists (AACB), have also undertaken an assessment of analytical bias using commutable samples and determined that of the 27 general chemistry analytes studied, 19 showed sufficiently small between method biases as to not prevent harmonisation of reference intervals. Application of evidence based approaches including the determination of analytical bias using commutable material is necessary when seeking to harmonise reference intervals.